Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: talitos - fix bug in sg_copy_end_to_buffer
diff --git a/.gitignore b/.gitignore
index a2939fc..8faa6c0 100644
--- a/.gitignore
+++ b/.gitignore
@@ -28,6 +28,7 @@
*.gz
*.bz2
*.lzma
+*.lzo
*.patch
*.gcno
diff --git a/Documentation/.gitignore b/Documentation/.gitignore
new file mode 100644
index 0000000..bcd907b
--- /dev/null
+++ b/Documentation/.gitignore
@@ -0,0 +1,7 @@
+filesystems/dnotify_test
+laptops/dslm
+timers/hpet_example
+vm/hugepage-mmap
+vm/hugepage-shm
+vm/map_hugetlb
+
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index dd10b51..5405f7a 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -32,8 +32,6 @@
- directory with DocBook templates etc. for kernel documentation.
HOWTO
- the process and procedures of how to do Linux kernel development.
-IO-mapping.txt
- - how to access I/O mapped memory from within device drivers.
IPMI.txt
- info on Linux Intelligent Platform Management Interface (IPMI) Driver.
IRQ-affinity.txt
@@ -84,6 +82,8 @@
- info on block devices & drivers
btmrvl.txt
- info on Marvell Bluetooth driver usage.
+bus-virt-phys-mapping.txt
+ - how to access I/O mapped memory from within device drivers.
cachetlb.txt
- describes the cache/TLB flushing interfaces Linux uses.
cdrom/
@@ -168,6 +168,8 @@
- how to use the RAM disk as an initial/temporary root filesystem.
input/
- info on Linux input device support.
+io-mapping.txt
+ - description of io_mapping functions in linux/io-mapping.h
io_ordering.txt
- info on ordering I/O writes to memory-mapped addresses.
ioctl/
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 428676c..25be325 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -133,46 +133,6 @@
The symbolic link points to the PCI device sysfs entry of the
Physical Function this device associates with.
-
-What: /sys/bus/pci/slots/...
-Date: April 2005 (possibly older)
-KernelVersion: 2.6.12 (possibly older)
-Contact: linux-pci@vger.kernel.org
-Description:
- When the appropriate driver is loaded, it will create a
- directory per claimed physical PCI slot in
- /sys/bus/pci/slots/. The names of these directories are
- specific to the driver, which in turn, are specific to the
- platform, but in general, should match the label on the
- machine's physical chassis.
-
- The drivers that can create slot directories include the
- PCI hotplug drivers, and as of 2.6.27, the pci_slot driver.
-
- The slot directories contain, at a minimum, a file named
- 'address' which contains the PCI bus:device:function tuple.
- Other files may appear as well, but are specific to the
- driver.
-
-What: /sys/bus/pci/slots/.../function[0-7]
-Date: March 2010
-KernelVersion: 2.6.35
-Contact: linux-pci@vger.kernel.org
-Description:
- If PCI slot directories (as described above) are created,
- and the physical slot is actually populated with a device,
- symbolic links in the slot directory pointing to the
- device's PCI functions are created as well.
-
-What: /sys/bus/pci/devices/.../slot
-Date: March 2010
-KernelVersion: 2.6.35
-Contact: linux-pci@vger.kernel.org
-Description:
- If PCI slot directories (as described above) are created,
- a symbolic link pointing to the slot directory will be
- created as well.
-
What: /sys/bus/pci/slots/.../module
Date: June 2009
Contact: linux-pci@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-firmware-sfi b/Documentation/ABI/testing/sysfs-firmware-sfi
new file mode 100644
index 0000000..4be7d44
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-sfi
@@ -0,0 +1,15 @@
+What: /sys/firmware/sfi/tables/
+Date: May 2010
+Contact: Len Brown <lenb@kernel.org>
+Description:
+ SFI defines a number of small static memory tables
+ so the kernel can get platform information from firmware.
+
+ The tables are defined in the latest SFI specification:
+ http://simplefirmware.org/documentation
+
+ While the tables are used by the kernel, user-space
+ can observe them this way:
+
+ # cd /sys/firmware/sfi/tables
+ # cat $TABLENAME > $TABLENAME.bin
diff --git a/Documentation/DMA-API-HOWTO.txt b/Documentation/DMA-API-HOWTO.txt
index 2e435ad..98ce517 100644
--- a/Documentation/DMA-API-HOWTO.txt
+++ b/Documentation/DMA-API-HOWTO.txt
@@ -639,6 +639,36 @@
they are entirely deprecated. Some ports already do not provide these
as it is impossible to correctly support them.
+ Handling Errors
+
+DMA address space is limited on some architectures and an allocation
+failure can be determined by:
+
+- checking if dma_alloc_coherent returns NULL or dma_map_sg returns 0
+
+- checking the returned dma_addr_t of dma_map_single and dma_map_page
+ by using dma_mapping_error():
+
+ dma_addr_t dma_handle;
+
+ dma_handle = dma_map_single(dev, addr, size, direction);
+ if (dma_mapping_error(dev, dma_handle)) {
+ /*
+ * reduce current DMA mapping usage,
+ * delay and try again later or
+ * reset driver.
+ */
+ }
+
+Networking drivers must call dev_kfree_skb to free the socket buffer
+and return NETDEV_TX_OK if the DMA mapping fails on the transmit hook
+(ndo_start_xmit). This means that the socket buffer is just dropped in
+the failure case.
+
+SCSI drivers must return SCSI_MLQUEUE_HOST_BUSY if the DMA mapping
+fails in the queuecommand hook. This means that the SCSI subsystem
+passes the command to the driver again later.
+
Optimizing Unmap State Space Consumption
On many platforms, dma_unmap_{single,page}() is simply a nop.
@@ -703,42 +733,25 @@
1) Struct scatterlist requirements.
- Struct scatterlist must contain, at a minimum, the following
- members:
+ Don't invent the architecture specific struct scatterlist; just use
+ <asm-generic/scatterlist.h>. You need to enable
+ CONFIG_NEED_SG_DMA_LENGTH if the architecture supports IOMMUs
+ (including software IOMMU).
- struct page *page;
- unsigned int offset;
- unsigned int length;
+2) ARCH_KMALLOC_MINALIGN
- The base address is specified by a "page+offset" pair.
+ Architectures must ensure that kmalloc'ed buffer is
+ DMA-safe. Drivers and subsystems depend on it. If an architecture
+ isn't fully DMA-coherent (i.e. hardware doesn't ensure that data in
+ the CPU cache is identical to data in main memory),
+ ARCH_KMALLOC_MINALIGN must be set so that the memory allocator
+ makes sure that kmalloc'ed buffer doesn't share a cache line with
+ the others. See arch/arm/include/asm/cache.h as an example.
- Previous versions of struct scatterlist contained a "void *address"
- field that was sometimes used instead of page+offset. As of Linux
- 2.5., page+offset is always used, and the "address" field has been
- deleted.
-
-2) More to come...
-
- Handling Errors
-
-DMA address space is limited on some architectures and an allocation
-failure can be determined by:
-
-- checking if dma_alloc_coherent returns NULL or dma_map_sg returns 0
-
-- checking the returned dma_addr_t of dma_map_single and dma_map_page
- by using dma_mapping_error():
-
- dma_addr_t dma_handle;
-
- dma_handle = dma_map_single(dev, addr, size, direction);
- if (dma_mapping_error(dev, dma_handle)) {
- /*
- * reduce current DMA mapping usage,
- * delay and try again later or
- * reset driver.
- */
- }
+ Note that ARCH_KMALLOC_MINALIGN is about DMA memory alignment
+ constraints. You don't need to worry about the architecture data
+ alignment constraints (e.g. the alignment constraints about 64-bit
+ objects).
Closing
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index 7583dc7..910c923 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -389,7 +389,7 @@
</para>
<para>
If your driver supports memory management (it should!), you'll
- need to set that up at load time as well. How you intialize
+ need to set that up at load time as well. How you initialize
it depends on which memory manager you're using, TTM or GEM.
</para>
<sect3>
@@ -399,7 +399,7 @@
aperture space for graphics devices. TTM supports both UMA devices
and devices with dedicated video RAM (VRAM), i.e. most discrete
graphics devices. If your device has dedicated RAM, supporting
- TTM is desireable. TTM also integrates tightly with your
+ TTM is desirable. TTM also integrates tightly with your
driver specific buffer execution function. See the radeon
driver for examples.
</para>
@@ -443,7 +443,7 @@
likely eventually calling ttm_bo_global_init and
ttm_bo_global_release, respectively. Also like the previous
object, ttm_global_item_ref is used to create an initial reference
- count for the TTM, which will call your initalization function.
+ count for the TTM, which will call your initialization function.
</para>
</sect3>
<sect3>
@@ -557,7 +557,7 @@
CRT connector and encoder combination is created. A device
specific i2c bus is also created, for fetching EDID data and
performing monitor detection. Once the process is complete,
- the new connector is regsitered with sysfs, to make its
+ the new connector is registered with sysfs, to make its
properties available to applications.
</para>
<sect4>
@@ -581,12 +581,12 @@
<para>
For each encoder, CRTC and connector, several functions must
be provided, depending on the object type. Encoder objects
- need should provide a DPMS (basically on/off) function, mode fixup
+ need to provide a DPMS (basically on/off) function, mode fixup
(for converting requested modes into native hardware timings),
and prepare, set and commit functions for use by the core DRM
helper functions. Connector helpers need to provide mode fetch and
validity functions as well as an encoder matching function for
- returing an ideal encoder for a given connector. The core
+ returning an ideal encoder for a given connector. The core
connector functions include a DPMS callback, (deprecated)
save/restore routines, detection, mode probing, property handling,
and cleanup functions.
diff --git a/Documentation/DocBook/v4l/v4l2.xml b/Documentation/DocBook/v4l/v4l2.xml
index 9737243..7c3c098 100644
--- a/Documentation/DocBook/v4l/v4l2.xml
+++ b/Documentation/DocBook/v4l/v4l2.xml
@@ -58,7 +58,7 @@
</contrib>
<affiliation>
<address>
- <email>awalls@radix.net</email>
+ <email>awalls@md.metrocast.net</email>
</address>
</affiliation>
</author>
diff --git a/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml b/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
index 87e4f0f..402229e 100644
--- a/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
+++ b/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
@@ -53,8 +53,10 @@
automatically, similar to sensing the video standard. To do so, applications
call <constant> VIDIOC_QUERY_DV_PRESET</constant> with a pointer to a
&v4l2-dv-preset; type. Once the hardware detects a preset, that preset is
-returned in the preset field of &v4l2-dv-preset;. When detection is not
-possible or fails, the value V4L2_DV_INVALID is returned.</para>
+returned in the preset field of &v4l2-dv-preset;. If the preset could not be
+detected because there was no signal, or the signal was unreliable, or the
+signal did not map to a supported preset, then the value V4L2_DV_INVALID is
+returned.</para>
</refsect1>
<refsect1>
diff --git a/Documentation/SubmittingDrivers b/Documentation/SubmittingDrivers
index 99e72a8..4947fd8 100644
--- a/Documentation/SubmittingDrivers
+++ b/Documentation/SubmittingDrivers
@@ -130,6 +130,8 @@
ftp.??.kernel.org:/pub/linux/kernel/...
?? == your country code, such as "us", "uk", "fr", etc.
+ http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git
+
Linux kernel mailing list:
linux-kernel@vger.kernel.org
[mail majordomo@vger.kernel.org to subscribe]
@@ -160,3 +162,6 @@
Kernel Janitor:
http://janitor.kernelnewbies.org/
+
+GIT, Fast Version Control System:
+ http://git-scm.com/
diff --git a/Documentation/acpi/apei/einj.txt b/Documentation/acpi/apei/einj.txt
new file mode 100644
index 0000000..dfab718
--- /dev/null
+++ b/Documentation/acpi/apei/einj.txt
@@ -0,0 +1,59 @@
+ APEI Error INJection
+ ~~~~~~~~~~~~~~~~~~~~
+
+EINJ provides a hardware error injection mechanism
+It is very useful for debugging and testing of other APEI and RAS features.
+
+To use EINJ, make sure the following are enabled in your kernel
+configuration:
+
+CONFIG_DEBUG_FS
+CONFIG_ACPI_APEI
+CONFIG_ACPI_APEI_EINJ
+
+The user interface of EINJ is debug file system, under the
+directory apei/einj. The following files are provided.
+
+- available_error_type
+ Reading this file returns the error injection capability of the
+ platform, that is, which error types are supported. The error type
+ definition is as follow, the left field is the error type value, the
+ right field is error description.
+
+ 0x00000001 Processor Correctable
+ 0x00000002 Processor Uncorrectable non-fatal
+ 0x00000004 Processor Uncorrectable fatal
+ 0x00000008 Memory Correctable
+ 0x00000010 Memory Uncorrectable non-fatal
+ 0x00000020 Memory Uncorrectable fatal
+ 0x00000040 PCI Express Correctable
+ 0x00000080 PCI Express Uncorrectable fatal
+ 0x00000100 PCI Express Uncorrectable non-fatal
+ 0x00000200 Platform Correctable
+ 0x00000400 Platform Uncorrectable non-fatal
+ 0x00000800 Platform Uncorrectable fatal
+
+ The format of file contents are as above, except there are only the
+ available error type lines.
+
+- error_type
+ This file is used to set the error type value. The error type value
+ is defined in "available_error_type" description.
+
+- error_inject
+ Write any integer to this file to trigger the error
+ injection. Before this, please specify all necessary error
+ parameters.
+
+- param1
+ This file is used to set the first error parameter value. Effect of
+ parameter depends on error_type specified. For memory error, this is
+ physical memory address.
+
+- param2
+ This file is used to set the second error parameter value. Effect of
+ parameter depends on error_type specified. For memory error, this is
+ physical memory address mask.
+
+For more information about EINJ, please refer to ACPI specification
+version 4.0, section 17.5.
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index 2af2cf3..816d607 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -12,6 +12,8 @@
of the s3c2410 GPIO system, please read the Samsung provided
data-sheet/users manual to find out the complete list.
+ See Documentation/arm/Samsung/GPIO.txt for the core implemetation.
+
GPIOLIB
-------
@@ -24,8 +26,60 @@
listed below will be removed (they may be marked as __deprecated
in the near future).
- - s3c2410_gpio_getpin
- - s3c2410_gpio_setpin
+ The following functions now either have a s3c_ specific variant
+ or are merged into gpiolib. See the definitions in
+ arch/arm/plat-samsung/include/plat/gpio-cfg.h:
+
+ s3c2410_gpio_setpin() gpio_set_value() or gpio_direction_output()
+ s3c2410_gpio_getpin() gpio_get_value() or gpio_direction_input()
+ s3c2410_gpio_getirq() gpio_to_irq()
+ s3c2410_gpio_cfgpin() s3c_gpio_cfgpin()
+ s3c2410_gpio_getcfg() s3c_gpio_getcfg()
+ s3c2410_gpio_pullup() s3c_gpio_setpull()
+
+
+GPIOLIB conversion
+------------------
+
+If you need to convert your board or driver to use gpiolib from the exiting
+s3c2410 api, then here are some notes on the process.
+
+1) If your board is exclusively using an GPIO, say to control peripheral
+ power, then it will require to claim the gpio with gpio_request() before
+ it can use it.
+
+ It is recommended to check the return value, with at least WARN_ON()
+ during initialisation.
+
+2) The s3c2410_gpio_cfgpin() can be directly replaced with s3c_gpio_cfgpin()
+ as they have the same arguments, and can either take the pin specific
+ values, or the more generic special-function-number arguments.
+
+3) s3c2410_gpio_pullup() changs have the problem that whilst the
+ s3c2410_gpio_pullup(x, 1) can be easily translated to the
+ s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0)
+ are not so easy.
+
+ The s3c2410_gpio_pullup(x, 0) case enables the pull-up (or in the case
+ of some of the devices, a pull-down) and as such the new API distinguishes
+ between the UP and DOWN case. There is currently no 'just turn on' setting
+ which may be required if this becomes a problem.
+
+4) s3c2410_gpio_setpin() can be replaced by gpio_set_value(), the old call
+ does not implicitly configure the relevant gpio to output. The gpio
+ direction should be changed before using gpio_set_value().
+
+5) s3c2410_gpio_getpin() is replaceable by gpio_get_value() if the pin
+ has been set to input. It is currently unknown what the behaviour is
+ when using gpio_get_value() on an output pin (s3c2410_gpio_getpin
+ would return the value the pin is supposed to be outputting).
+
+6) s3c2410_gpio_getirq() should be directly replacable with the
+ gpio_to_irq() call.
+
+The s3c2410_gpio and gpio_ calls have always operated on the same gpio
+numberspace, so there is no problem with converting the gpio numbering
+between the calls.
Headers
@@ -54,6 +108,11 @@
eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
the GPIO functions which pin is to be used.
+ With the conversion to gpiolib, there is no longer a direct conversion
+ from gpio pin number to register base address as in earlier kernels. This
+ is due to the number space required for newer SoCs where the later
+ GPIOs are not contiguous.
+
Configuring a pin
-----------------
@@ -71,6 +130,8 @@
which would turn GPA(0) into the lowest Address line A0, and set
GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
+ The s3c_gpio_cfgpin() call is a functional replacement for this call.
+
Reading the current configuration
---------------------------------
@@ -82,6 +143,9 @@
The return value will be from the same set of values which can be
passed to s3c2410_gpio_cfgpin().
+ The s3c_gpio_getcfg() call should be a functional replacement for
+ this call.
+
Configuring a pull-up resistor
------------------------------
@@ -95,6 +159,10 @@
Where the to value is zero to set the pull-up off, and 1 to enable
the specified pull-up. Any other values are currently undefined.
+ The s3c_gpio_setpull() offers similar functionality, but with the
+ ability to encode whether the pull is up or down. Currently there
+ is no 'just on' state, so up or down must be selected.
+
Getting the state of a PIN
--------------------------
@@ -106,6 +174,9 @@
This will return either zero or non-zero. Do not count on this
function returning 1 if the pin is set.
+ This call is now implemented by the relevant gpiolib calls, convert
+ your board or driver to use gpiolib.
+
Setting the state of a PIN
--------------------------
@@ -117,6 +188,9 @@
Which sets the given pin to the value. Use 0 to write 0, and 1 to
set the output to 1.
+ This call is now implemented by the relevant gpiolib calls, convert
+ your board or driver to use gpiolib.
+
Getting the IRQ number associated with a PIN
--------------------------------------------
@@ -128,6 +202,9 @@
Note, not all pins have an IRQ.
+ This call is now implemented by the relevant gpiolib calls, convert
+ your board or driver to use gpiolib.
+
Authour
-------
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index 081892d..c12bfc1 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -8,10 +8,16 @@
The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
- S3C2412, S3C2413, S3C2440, S3C2442 and S3C2443 devices are supported.
+ S3C2412, S3C2413, S3C2416 S3C2440, S3C2442, S3C2443 and S3C2450 devices
+ are supported.
Support for the S3C2400 and S3C24A0 series are in progress.
+ The S3C2416 and S3C2450 devices are very similar and S3C2450 support is
+ included under the arch/arm/mach-s3c2416 directory. Note, whilst core
+ support for these SoCs is in, work on some of the extra peripherals
+ and extra interrupts is still ongoing.
+
Configuration
-------------
@@ -209,6 +215,13 @@
Newer kernels carry GPIOLIB, and support is being moved towards
this with some of the older support in line to be removed.
+ As of v2.6.34, the move towards using gpiolib support is almost
+ complete, and very little of the old calls are left.
+
+ See Documentation/arm/Samsung-S3C24XX/GPIO.txt for the S3C24XX specific
+ support and Documentation/arm/Samsung/GPIO.txt for the core Samsung
+ implementation.
+
Clock Management
----------------
diff --git a/Documentation/arm/Samsung/GPIO.txt b/Documentation/arm/Samsung/GPIO.txt
new file mode 100644
index 0000000..05850c6
--- /dev/null
+++ b/Documentation/arm/Samsung/GPIO.txt
@@ -0,0 +1,42 @@
+ Samsung GPIO implementation
+ ===========================
+
+Introduction
+------------
+
+This outlines the Samsung GPIO implementation and the architecture
+specfic calls provided alongisde the drivers/gpio core.
+
+
+S3C24XX (Legacy)
+----------------
+
+See Documentation/arm/Samsung-S3C24XX/GPIO.txt for more information
+about these devices. Their implementation is being brought into line
+with the core samsung implementation described in this document.
+
+
+GPIOLIB integration
+-------------------
+
+The gpio implementation uses gpiolib as much as possible, only providing
+specific calls for the items that require Samsung specific handling, such
+as pin special-function or pull resistor control.
+
+GPIO numbering is synchronised between the Samsung and gpiolib system.
+
+
+PIN configuration
+-----------------
+
+Pin configuration is specific to the Samsung architecutre, with each SoC
+registering the necessary information for the core gpio configuration
+implementation to configure pins as necessary.
+
+The s3c_gpio_cfgpin() and s3c_gpio_setpull() provide the means for a
+driver or machine to change gpio configuration.
+
+See arch/arm/plat-samsung/include/plat/gpio-cfg.h for more information
+on these functions.
+
+
diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt
index 7cced1f..c3094ea 100644
--- a/Documentation/arm/Samsung/Overview.txt
+++ b/Documentation/arm/Samsung/Overview.txt
@@ -13,9 +13,10 @@
- S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
- S3C64XX: S3C6400 and S3C6410
- - S5PC6440
-
- S5PC100 and S5PC110 support is currently being merged
+ - S5P6440
+ - S5P6442
+ - S5PC100
+ - S5PC110 / S5PV210
S3C24XX Systems
@@ -35,7 +36,10 @@
unifying all the SoCs into one kernel.
s5p6440_defconfig - S5P6440 specific default configuration
+ s5p6442_defconfig - S5P6442 specific default configuration
s5pc100_defconfig - S5PC100 specific default configuration
+ s5pc110_defconfig - S5PC110 specific default configuration
+ s5pv210_defconfig - S5PV210 specific default configuration
Layout
@@ -50,18 +54,27 @@
specific information. It contains the base clock, GPIO and device definitions
to get the system running.
- plat-s3c is the s3c24xx/s3c64xx platform directory, although it is currently
- involved in other builds this will be phased out once the relevant code is
- moved elsewhere.
-
plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs.
- plat-s3c64xx is for the s3c64xx specific bits, see the S3C24XX docs.
-
- plat-s5p is for s5p specific builds, more to be added.
+ plat-s5p is for s5p specific builds, and contains common support for the
+ S5P specific systems. Not all S5Ps use all the features in this directory
+ due to differences in the hardware.
- [ to finish ]
+Layout changes
+--------------
+
+ The old plat-s3c and plat-s5pc1xx directories have been removed, with
+ support moved to either plat-samsung or plat-s5p as necessary. These moves
+ where to simplify the include and dependency issues involved with having
+ so many different platform directories.
+
+ It was decided to remove plat-s5pc1xx as some of the support was already
+ in plat-s5p or plat-samsung, with the S5PC110 support added with S5PV210
+ the only user was the S5PC100. The S5PC100 specific items where moved to
+ arch/arm/mach-s5pc100.
+
+
Port Contributors
diff --git a/Documentation/IO-mapping.txt b/Documentation/bus-virt-phys-mapping.txt
similarity index 100%
rename from Documentation/IO-mapping.txt
rename to Documentation/bus-virt-phys-mapping.txt
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index 57444c2..b34823f 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -339,7 +339,7 @@
The "xxx" is not interpreted by the cgroup code, but will appear in
/proc/mounts so may be any useful identifying string that you like.
-To mount a cgroup hierarchy with just the cpuset and numtasks
+To mount a cgroup hierarchy with just the cpuset and memory
subsystems, type:
# mount -t cgroup -o cpuset,memory hier1 /dev/cgroup
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index 6cab1f2..7781857 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -1,18 +1,15 @@
Memory Resource Controller
NOTE: The Memory Resource Controller has been generically been referred
-to as the memory controller in this document. Do not confuse memory controller
-used here with the memory controller that is used in hardware.
+ to as the memory controller in this document. Do not confuse memory
+ controller used here with the memory controller that is used in hardware.
-Salient features
-
-a. Enable control of Anonymous, Page Cache (mapped and unmapped) and
- Swap Cache memory pages.
-b. The infrastructure allows easy addition of other types of memory to control
-c. Provides *zero overhead* for non memory controller users
-d. Provides a double LRU: global memory pressure causes reclaim from the
- global LRU; a cgroup on hitting a limit, reclaims from the per
- cgroup LRU
+(For editors)
+In this document:
+ When we mention a cgroup (cgroupfs's directory) with memory controller,
+ we call it "memory cgroup". When you see git-log and source code, you'll
+ see patch's title and function names tend to use "memcg".
+ In this document, we avoid using it.
Benefits and Purpose of the memory controller
@@ -33,6 +30,45 @@
e. There are several other use cases, find one or use the controller just
for fun (to learn and hack on the VM subsystem).
+Current Status: linux-2.6.34-mmotm(development version of 2010/April)
+
+Features:
+ - accounting anonymous pages, file caches, swap caches usage and limiting them.
+ - private LRU and reclaim routine. (system's global LRU and private LRU
+ work independently from each other)
+ - optionally, memory+swap usage can be accounted and limited.
+ - hierarchical accounting
+ - soft limit
+ - moving(recharging) account at moving a task is selectable.
+ - usage threshold notifier
+ - oom-killer disable knob and oom-notifier
+ - Root cgroup has no limit controls.
+
+ Kernel memory and Hugepages are not under control yet. We just manage
+ pages on LRU. To add more controls, we have to take care of performance.
+
+Brief summary of control files.
+
+ tasks # attach a task(thread) and show list of threads
+ cgroup.procs # show list of processes
+ cgroup.event_control # an interface for event_fd()
+ memory.usage_in_bytes # show current memory(RSS+Cache) usage.
+ memory.memsw.usage_in_bytes # show current memory+Swap usage
+ memory.limit_in_bytes # set/show limit of memory usage
+ memory.memsw.limit_in_bytes # set/show limit of memory+Swap usage
+ memory.failcnt # show the number of memory usage hits limits
+ memory.memsw.failcnt # show the number of memory+Swap hits limits
+ memory.max_usage_in_bytes # show max memory usage recorded
+ memory.memsw.usage_in_bytes # show max memory+Swap usage recorded
+ memory.soft_limit_in_bytes # set/show soft limit of memory usage
+ memory.stat # show various statistics
+ memory.use_hierarchy # set/show hierarchical account enabled
+ memory.force_empty # trigger forced move charge to parent
+ memory.swappiness # set/show swappiness parameter of vmscan
+ (See sysctl's vm.swappiness)
+ memory.move_charge_at_immigrate # set/show controls of moving charges
+ memory.oom_control # set/show oom controls.
+
1. History
The memory controller has a long history. A request for comments for the memory
@@ -106,14 +142,14 @@
is over its limit. If it is then reclaim is invoked on the cgroup.
More details can be found in the reclaim section of this document.
If everything goes well, a page meta-data-structure called page_cgroup is
-allocated and associated with the page. This routine also adds the page to
-the per cgroup LRU.
+updated. page_cgroup has its own LRU on cgroup.
+(*) page_cgroup structure is allocated at boot/memory-hotplug time.
2.2.1 Accounting details
All mapped anon pages (RSS) and cache pages (Page Cache) are accounted.
-(some pages which never be reclaimable and will not be on global LRU
- are not accounted. we just accounts pages under usual vm management.)
+Some pages which are never reclaimable and will not be on the global LRU
+are not accounted. We just account pages under usual VM management.
RSS pages are accounted at page_fault unless they've already been accounted
for earlier. A file page will be accounted for as Page Cache when it's
@@ -121,12 +157,19 @@
processes, duplicate accounting is carefully avoided.
A RSS page is unaccounted when it's fully unmapped. A PageCache page is
-unaccounted when it's removed from radix-tree.
+unaccounted when it's removed from radix-tree. Even if RSS pages are fully
+unmapped (by kswapd), they may exist as SwapCache in the system until they
+are really freed. Such SwapCaches also also accounted.
+A swapped-in page is not accounted until it's mapped.
+
+Note: The kernel does swapin-readahead and read multiple swaps at once.
+This means swapped-in pages may contain pages for other tasks than a task
+causing page fault. So, we avoid accounting at swap-in I/O.
At page migration, accounting information is kept.
-Note: we just account pages-on-lru because our purpose is to control amount
-of used pages. not-on-lru pages are tend to be out-of-control from vm view.
+Note: we just account pages-on-LRU because our purpose is to control amount
+of used pages; not-on-LRU pages tend to be out-of-control from VM view.
2.3 Shared Page Accounting
@@ -143,6 +186,7 @@
2.4 Swap Extension (CONFIG_CGROUP_MEM_RES_CTLR_SWAP)
+
Swap Extension allows you to record charge for swap. A swapped-in page is
charged back to original page allocator if possible.
@@ -150,13 +194,20 @@
- memory.memsw.usage_in_bytes.
- memory.memsw.limit_in_bytes.
-usage of mem+swap is limited by memsw.limit_in_bytes.
+memsw means memory+swap. Usage of memory+swap is limited by
+memsw.limit_in_bytes.
-* why 'mem+swap' rather than swap.
+Example: Assume a system with 4G of swap. A task which allocates 6G of memory
+(by mistake) under 2G memory limitation will use all swap.
+In this case, setting memsw.limit_in_bytes=3G will prevent bad use of swap.
+By using memsw limit, you can avoid system OOM which can be caused by swap
+shortage.
+
+* why 'memory+swap' rather than swap.
The global LRU(kswapd) can swap out arbitrary pages. Swap-out means
to move account from memory to swap...there is no change in usage of
-mem+swap. In other words, when we want to limit the usage of swap without
-affecting global LRU, mem+swap limit is better than just limiting swap from
+memory+swap. In other words, when we want to limit the usage of swap without
+affecting global LRU, memory+swap limit is better than just limiting swap from
OS point of view.
* What happens when a cgroup hits memory.memsw.limit_in_bytes
@@ -168,12 +219,12 @@
2.5 Reclaim
-Each cgroup maintains a per cgroup LRU that consists of an active
-and inactive list. When a cgroup goes over its limit, we first try
+Each cgroup maintains a per cgroup LRU which has the same structure as
+global VM. When a cgroup goes over its limit, we first try
to reclaim memory from the cgroup so as to make space for the new
pages that the cgroup has touched. If the reclaim is unsuccessful,
an OOM routine is invoked to select and kill the bulkiest task in the
-cgroup.
+cgroup. (See 10. OOM Control below.)
The reclaim algorithm has not been modified for cgroups, except that
pages that are selected for reclaiming come from the per cgroup LRU
@@ -184,13 +235,22 @@
Note2: When panic_on_oom is set to "2", the whole system will panic.
-2. Locking
+When oom event notifier is registered, event will be delivered.
+(See oom_control section)
-The memory controller uses the following hierarchy
+2.6 Locking
-1. zone->lru_lock is used for selecting pages to be isolated
-2. mem->per_zone->lru_lock protects the per cgroup LRU (per zone)
-3. lock_page_cgroup() is used to protect page->page_cgroup
+ lock_page_cgroup()/unlock_page_cgroup() should not be called under
+ mapping->tree_lock.
+
+ Other lock order is following:
+ PG_locked.
+ mm->page_table_lock
+ zone->lru_lock
+ lock_page_cgroup.
+ In many cases, just lock_page_cgroup() is called.
+ per-zone-per-cgroup LRU (cgroup's private LRU) is just guarded by
+ zone->lru_lock, it has no lock of its own.
3. User Interface
@@ -199,6 +259,7 @@
a. Enable CONFIG_CGROUPS
b. Enable CONFIG_RESOURCE_COUNTERS
c. Enable CONFIG_CGROUP_MEM_RES_CTLR
+d. Enable CONFIG_CGROUP_MEM_RES_CTLR_SWAP (to use swap extension)
1. Prepare the cgroups
# mkdir -p /cgroups
@@ -206,31 +267,28 @@
2. Make the new group and move bash into it
# mkdir /cgroups/0
-# echo $$ > /cgroups/0/tasks
+# echo $$ > /cgroups/0/tasks
-Since now we're in the 0 cgroup,
-We can alter the memory limit:
+Since now we're in the 0 cgroup, we can alter the memory limit:
# echo 4M > /cgroups/0/memory.limit_in_bytes
NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
-mega or gigabytes.
+mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes, Gibibytes.)
+
NOTE: We can write "-1" to reset the *.limit_in_bytes(unlimited).
NOTE: We cannot set limits on the root cgroup any more.
# cat /cgroups/0/memory.limit_in_bytes
4194304
-NOTE: The interface has now changed to display the usage in bytes
-instead of pages
-
We can check the usage:
# cat /cgroups/0/memory.usage_in_bytes
1216512
A successful write to this file does not guarantee a successful set of
-this limit to the value written into the file. This can be due to a
+this limit to the value written into the file. This can be due to a
number of factors, such as rounding up to page boundaries or the total
-availability of memory on the system. The user is required to re-read
+availability of memory on the system. The user is required to re-read
this file after a write to guarantee the value committed by the kernel.
# echo 1 > memory.limit_in_bytes
@@ -245,15 +303,23 @@
4. Testing
-Balbir posted lmbench, AIM9, LTP and vmmstress results [10] and [11].
-Apart from that v6 has been tested with several applications and regular
-daily use. The controller has also been tested on the PPC64, x86_64 and
-UML platforms.
+For testing features and implementation, see memcg_test.txt.
+
+Performance test is also important. To see pure memory controller's overhead,
+testing on tmpfs will give you good numbers of small overheads.
+Example: do kernel make on tmpfs.
+
+Page-fault scalability is also important. At measuring parallel
+page fault test, multi-process test may be better than multi-thread
+test because it has noise of shared objects/status.
+
+But the above two are testing extreme situations.
+Trying usual test under memory controller is always helpful.
4.1 Troubleshooting
Sometimes a user might find that the application under a cgroup is
-terminated. There are several causes for this:
+terminated by OOM killer. There are several causes for this:
1. The cgroup limit is too low (just too low to do anything useful)
2. The user is using anonymous memory and swap is turned off or too low
@@ -261,6 +327,9 @@
A sync followed by echo 1 > /proc/sys/vm/drop_caches will help get rid of
some of the pages cached in the cgroup (page cache pages).
+To know what happens, disable OOM_Kill by 10. OOM Control(see below) and
+seeing what happens will be helpful.
+
4.2 Task migration
When a task migrates from one cgroup to another, its charge is not
@@ -268,16 +337,19 @@
remain charged to it, the charge is dropped when the page is freed or
reclaimed.
-Note: You can move charges of a task along with task migration. See 8.
+You can move charges of a task along with task migration.
+See 8. "Move charges at task migration"
4.3 Removing a cgroup
A cgroup can be removed by rmdir, but as discussed in sections 4.1 and 4.2, a
cgroup might have some charge associated with it, even though all
-tasks have migrated away from it.
-Such charges are freed(at default) or moved to its parent. When moved,
-both of RSS and CACHES are moved to parent.
-If both of them are busy, rmdir() returns -EBUSY. See 5.1 Also.
+tasks have migrated away from it. (because we charge against pages, not
+against tasks.)
+
+Such charges are freed or moved to their parent. At moving, both of RSS
+and CACHES are moved to parent.
+rmdir() may return -EBUSY if freeing/moving fails. See 5.1 also.
Charges recorded in swap information is not updated at removal of cgroup.
Recorded information is discarded and a cgroup which uses swap (swapcache)
@@ -293,10 +365,10 @@
# echo 0 > memory.force_empty
- Almost all pages tracked by this memcg will be unmapped and freed. Some of
- pages cannot be freed because it's locked or in-use. Such pages are moved
- to parent and this cgroup will be empty. But this may return -EBUSY in
- some too busy case.
+ Almost all pages tracked by this memory cgroup will be unmapped and freed.
+ Some pages cannot be freed because they are locked or in-use. Such pages are
+ moved to parent and this cgroup will be empty. This may return -EBUSY if
+ VM is too busy to free/move all pages immediately.
Typical use case of this interface is that calling this before rmdir().
Because rmdir() moves all pages to parent, some out-of-use page caches can be
@@ -306,19 +378,41 @@
memory.stat file includes following statistics
+# per-memory cgroup local status
cache - # of bytes of page cache memory.
rss - # of bytes of anonymous and swap cache memory.
+mapped_file - # of bytes of mapped file (includes tmpfs/shmem)
pgpgin - # of pages paged in (equivalent to # of charging events).
pgpgout - # of pages paged out (equivalent to # of uncharging events).
-active_anon - # of bytes of anonymous and swap cache memory on active
- lru list.
+swap - # of bytes of swap usage
inactive_anon - # of bytes of anonymous memory and swap cache memory on
- inactive lru list.
-active_file - # of bytes of file-backed memory on active lru list.
-inactive_file - # of bytes of file-backed memory on inactive lru list.
+ LRU list.
+active_anon - # of bytes of anonymous and swap cache memory on active
+ inactive LRU list.
+inactive_file - # of bytes of file-backed memory on inactive LRU list.
+active_file - # of bytes of file-backed memory on active LRU list.
unevictable - # of bytes of memory that cannot be reclaimed (mlocked etc).
-The following additional stats are dependent on CONFIG_DEBUG_VM.
+# status considering hierarchy (see memory.use_hierarchy settings)
+
+hierarchical_memory_limit - # of bytes of memory limit with regard to hierarchy
+ under which the memory cgroup is
+hierarchical_memsw_limit - # of bytes of memory+swap limit with regard to
+ hierarchy under which memory cgroup is.
+
+total_cache - sum of all children's "cache"
+total_rss - sum of all children's "rss"
+total_mapped_file - sum of all children's "cache"
+total_pgpgin - sum of all children's "pgpgin"
+total_pgpgout - sum of all children's "pgpgout"
+total_swap - sum of all children's "swap"
+total_inactive_anon - sum of all children's "inactive_anon"
+total_active_anon - sum of all children's "active_anon"
+total_inactive_file - sum of all children's "inactive_file"
+total_active_file - sum of all children's "active_file"
+total_unevictable - sum of all children's "unevictable"
+
+# The following additional stats are dependent on CONFIG_DEBUG_VM.
inactive_ratio - VM internal parameter. (see mm/page_alloc.c)
recent_rotated_anon - VM internal parameter. (see mm/vmscan.c)
@@ -327,24 +421,37 @@
recent_scanned_file - VM internal parameter. (see mm/vmscan.c)
Memo:
- recent_rotated means recent frequency of lru rotation.
- recent_scanned means recent # of scans to lru.
+ recent_rotated means recent frequency of LRU rotation.
+ recent_scanned means recent # of scans to LRU.
showing for better debug please see the code for meanings.
Note:
Only anonymous and swap cache memory is listed as part of 'rss' stat.
This should not be confused with the true 'resident set size' or the
- amount of physical memory used by the cgroup. Per-cgroup rss
- accounting is not done yet.
+ amount of physical memory used by the cgroup.
+ 'rss + file_mapped" will give you resident set size of cgroup.
+ (Note: file and shmem may be shared among other cgroups. In that case,
+ file_mapped is accounted only when the memory cgroup is owner of page
+ cache.)
5.3 swappiness
- Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
- Following cgroups' swappiness can't be changed.
- - root cgroup (uses /proc/sys/vm/swappiness).
- - a cgroup which uses hierarchy and it has child cgroup.
- - a cgroup which uses hierarchy and not the root of hierarchy.
+Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
+Following cgroups' swappiness can't be changed.
+- root cgroup (uses /proc/sys/vm/swappiness).
+- a cgroup which uses hierarchy and it has other cgroup(s) below it.
+- a cgroup which uses hierarchy and not the root of hierarchy.
+
+5.4 failcnt
+
+A memory cgroup provides memory.failcnt and memory.memsw.failcnt files.
+This failcnt(== failure count) shows the number of times that a usage counter
+hit its limit. When a memory cgroup hits a limit, failcnt increases and
+memory under it will be reclaimed.
+
+You can reset failcnt by writing 0 to failcnt file.
+# echo 0 > .../memory.failcnt
6. Hierarchy support
@@ -363,13 +470,13 @@
In the diagram above, with hierarchical accounting enabled, all memory
usage of e, is accounted to its ancestors up until the root (i.e, c and root),
-that has memory.use_hierarchy enabled. If one of the ancestors goes over its
+that has memory.use_hierarchy enabled. If one of the ancestors goes over its
limit, the reclaim algorithm reclaims from the tasks in the ancestor and the
children of the ancestor.
6.1 Enabling hierarchical accounting and reclaim
-The memory controller by default disables the hierarchy feature. Support
+A memory cgroup by default disables the hierarchy feature. Support
can be enabled by writing 1 to memory.use_hierarchy file of the root cgroup
# echo 1 > memory.use_hierarchy
@@ -379,10 +486,10 @@
# echo 0 > memory.use_hierarchy
NOTE1: Enabling/disabling will fail if the cgroup already has other
-cgroups created below it.
+ cgroups created below it.
NOTE2: When panic_on_oom is set to "2", the whole system will panic in
-case of an oom event in any cgroup.
+ case of an OOM event in any cgroup.
7. Soft limits
@@ -392,7 +499,7 @@
a. There is no memory contention
b. They do not exceed their hard limit
-When the system detects memory contention or low memory control groups
+When the system detects memory contention or low memory, control groups
are pushed back to their soft limits. If the soft limit of each control
group is very high, they are pushed back as much as possible to make
sure that one control group does not starve the others of memory.
@@ -406,7 +513,7 @@
7.1 Interface
Soft limits can be setup by using the following commands (in this example we
-assume a soft limit of 256 megabytes)
+assume a soft limit of 256 MiB)
# echo 256M > memory.soft_limit_in_bytes
@@ -442,7 +549,7 @@
Note: If we cannot find enough space for the task in the destination cgroup, we
try to make space by reclaiming memory. Task migration may fail if we
cannot make enough space.
-Note: It can take several seconds if you move charges in giga bytes order.
+Note: It can take several seconds if you move charges much.
And if you want disable it again:
@@ -451,21 +558,27 @@
8.2 Type of charges which can be move
Each bits of move_charge_at_immigrate has its own meaning about what type of
-charges should be moved.
+charges should be moved. But in any cases, it must be noted that an account of
+a page or a swap can be moved only when it is charged to the task's current(old)
+memory cgroup.
bit | what type of charges would be moved ?
-----+------------------------------------------------------------------------
0 | A charge of an anonymous page(or swap of it) used by the target task.
| Those pages and swaps must be used only by the target task. You must
| enable Swap Extension(see 2.4) to enable move of swap charges.
-
-Note: Those pages and swaps must be charged to the old cgroup.
-Note: More type of pages(e.g. file cache, shmem,) will be supported by other
- bits in future.
+ -----+------------------------------------------------------------------------
+ 1 | A charge of file pages(normal file, tmpfs file(e.g. ipc shared memory)
+ | and swaps of tmpfs file) mmapped by the target task. Unlike the case of
+ | anonymous pages, file pages(and swaps) in the range mmapped by the task
+ | will be moved even if the task hasn't done page fault, i.e. they might
+ | not be the task's "RSS", but other task's "RSS" that maps the same file.
+ | And mapcount of the page is ignored(the page can be moved even if
+ | page_mapcount(page) > 1). You must enable Swap Extension(see 2.4) to
+ | enable move of swap charges.
8.3 TODO
-- Add support for other types of pages(e.g. file cache, shmem, etc.).
- Implement madvise(2) to let users decide the vma to be moved or not to be
moved.
- All of moving charge operations are done under cgroup_mutex. It's not good
@@ -473,22 +586,61 @@
9. Memory thresholds
-Memory controler implements memory thresholds using cgroups notification
+Memory cgroup implements memory thresholds using cgroups notification
API (see cgroups.txt). It allows to register multiple memory and memsw
thresholds and gets notifications when it crosses.
To register a threshold application need:
- - create an eventfd using eventfd(2);
- - open memory.usage_in_bytes or memory.memsw.usage_in_bytes;
- - write string like "<event_fd> <memory.usage_in_bytes> <threshold>" to
- cgroup.event_control.
+- create an eventfd using eventfd(2);
+- open memory.usage_in_bytes or memory.memsw.usage_in_bytes;
+- write string like "<event_fd> <fd of memory.usage_in_bytes> <threshold>" to
+ cgroup.event_control.
Application will be notified through eventfd when memory usage crosses
threshold in any direction.
It's applicable for root and non-root cgroup.
-10. TODO
+10. OOM Control
+
+memory.oom_control file is for OOM notification and other controls.
+
+Memory cgroup implements OOM notifier using cgroup notification
+API (See cgroups.txt). It allows to register multiple OOM notification
+delivery and gets notification when OOM happens.
+
+To register a notifier, application need:
+ - create an eventfd using eventfd(2)
+ - open memory.oom_control file
+ - write string like "<event_fd> <fd of memory.oom_control>" to
+ cgroup.event_control
+
+Application will be notified through eventfd when OOM happens.
+OOM notification doesn't work for root cgroup.
+
+You can disable OOM-killer by writing "1" to memory.oom_control file, as:
+
+ #echo 1 > memory.oom_control
+
+This operation is only allowed to the top cgroup of sub-hierarchy.
+If OOM-killer is disabled, tasks under cgroup will hang/sleep
+in memory cgroup's OOM-waitqueue when they request accountable memory.
+
+For running them, you have to relax the memory cgroup's OOM status by
+ * enlarge limit or reduce usage.
+To reduce usage,
+ * kill some tasks.
+ * move some tasks to other group with account migration.
+ * remove some files (on tmpfs?)
+
+Then, stopped tasks will work again.
+
+At reading, current status of OOM is shown.
+ oom_kill_disable 0 or 1 (if 1, oom-killer is disabled)
+ under_oom 0 or 1 (if 1, the memory cgroup is under OOM, tasks may
+ be stopped.)
+
+11. TODO
1. Add support for accounting huge pages (as a separate controller)
2. Make per-cgroup scanner reclaim not-shared pages first
diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index 79c5332..0b875e8 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -6,6 +6,8 @@
7 Dec 2005
17 Jul 2007 Updated
+(c) Mauro Carvalho Chehab <mchehab@redhat.com>
+05 Aug 2009 Nehalem interface
EDAC is maintained and written by:
@@ -717,3 +719,153 @@
The 'test_device_edac' sample driver is located at the
bluesmoke.sourceforge.net project site for EDAC.
+=======================================================================
+NEHALEM USAGE OF EDAC APIs
+
+This chapter documents some EXPERIMENTAL mappings for EDAC API to handle
+Nehalem EDAC driver. They will likely be changed on future versions
+of the driver.
+
+Due to the way Nehalem exports Memory Controller data, some adjustments
+were done at i7core_edac driver. This chapter will cover those differences
+
+1) On Nehalem, there are one Memory Controller per Quick Patch Interconnect
+ (QPI). At the driver, the term "socket" means one QPI. This is
+ associated with a physical CPU socket.
+
+ Each MC have 3 physical read channels, 3 physical write channels and
+ 3 logic channels. The driver currenty sees it as just 3 channels.
+ Each channel can have up to 3 DIMMs.
+
+ The minimum known unity is DIMMs. There are no information about csrows.
+ As EDAC API maps the minimum unity is csrows, the driver sequencially
+ maps channel/dimm into different csrows.
+
+ For example, suposing the following layout:
+ Ch0 phy rd0, wr0 (0x063f4031): 2 ranks, UDIMMs
+ dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400
+ dimm 1 1024 Mb offset: 4, bank: 8, rank: 1, row: 0x4000, col: 0x400
+ Ch1 phy rd1, wr1 (0x063f4031): 2 ranks, UDIMMs
+ dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400
+ Ch2 phy rd3, wr3 (0x063f4031): 2 ranks, UDIMMs
+ dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400
+ The driver will map it as:
+ csrow0: channel 0, dimm0
+ csrow1: channel 0, dimm1
+ csrow2: channel 1, dimm0
+ csrow3: channel 2, dimm0
+
+exports one
+ DIMM per csrow.
+
+ Each QPI is exported as a different memory controller.
+
+2) Nehalem MC has the hability to generate errors. The driver implements this
+ functionality via some error injection nodes:
+
+ For injecting a memory error, there are some sysfs nodes, under
+ /sys/devices/system/edac/mc/mc?/:
+
+ inject_addrmatch/*:
+ Controls the error injection mask register. It is possible to specify
+ several characteristics of the address to match an error code:
+ dimm = the affected dimm. Numbers are relative to a channel;
+ rank = the memory rank;
+ channel = the channel that will generate an error;
+ bank = the affected bank;
+ page = the page address;
+ column (or col) = the address column.
+ each of the above values can be set to "any" to match any valid value.
+
+ At driver init, all values are set to any.
+
+ For example, to generate an error at rank 1 of dimm 2, for any channel,
+ any bank, any page, any column:
+ echo 2 >/sys/devices/system/edac/mc/mc0/inject_addrmatch/dimm
+ echo 1 >/sys/devices/system/edac/mc/mc0/inject_addrmatch/rank
+
+ To return to the default behaviour of matching any, you can do:
+ echo any >/sys/devices/system/edac/mc/mc0/inject_addrmatch/dimm
+ echo any >/sys/devices/system/edac/mc/mc0/inject_addrmatch/rank
+
+ inject_eccmask:
+ specifies what bits will have troubles,
+
+ inject_section:
+ specifies what ECC cache section will get the error:
+ 3 for both
+ 2 for the highest
+ 1 for the lowest
+
+ inject_type:
+ specifies the type of error, being a combination of the following bits:
+ bit 0 - repeat
+ bit 1 - ecc
+ bit 2 - parity
+
+ inject_enable starts the error generation when something different
+ than 0 is written.
+
+ All inject vars can be read. root permission is needed for write.
+
+ Datasheet states that the error will only be generated after a write on an
+ address that matches inject_addrmatch. It seems, however, that reading will
+ also produce an error.
+
+ For example, the following code will generate an error for any write access
+ at socket 0, on any DIMM/address on channel 2:
+
+ echo 2 >/sys/devices/system/edac/mc/mc0/inject_addrmatch/channel
+ echo 2 >/sys/devices/system/edac/mc/mc0/inject_type
+ echo 64 >/sys/devices/system/edac/mc/mc0/inject_eccmask
+ echo 3 >/sys/devices/system/edac/mc/mc0/inject_section
+ echo 1 >/sys/devices/system/edac/mc/mc0/inject_enable
+ dd if=/dev/mem of=/dev/null seek=16k bs=4k count=1 >& /dev/null
+
+ For socket 1, it is needed to replace "mc0" by "mc1" at the above
+ commands.
+
+ The generated error message will look like:
+
+ EDAC MC0: UE row 0, channel-a= 0 channel-b= 0 labels "-": NON_FATAL (addr = 0x0075b980, socket=0, Dimm=0, Channel=2, syndrome=0x00000040, count=1, Err=8c0000400001009f:4000080482 (read error: read ECC error))
+
+3) Nehalem specific Corrected Error memory counters
+
+ Nehalem have some registers to count memory errors. The driver uses those
+ registers to report Corrected Errors on devices with Registered Dimms.
+
+ However, those counters don't work with Unregistered Dimms. As the chipset
+ offers some counters that also work with UDIMMS (but with a worse level of
+ granularity than the default ones), the driver exposes those registers for
+ UDIMM memories.
+
+ They can be read by looking at the contents of all_channel_counts/
+
+ $ for i in /sys/devices/system/edac/mc/mc0/all_channel_counts/*; do echo $i; cat $i; done
+ /sys/devices/system/edac/mc/mc0/all_channel_counts/udimm0
+ 0
+ /sys/devices/system/edac/mc/mc0/all_channel_counts/udimm1
+ 0
+ /sys/devices/system/edac/mc/mc0/all_channel_counts/udimm2
+ 0
+
+ What happens here is that errors on different csrows, but at the same
+ dimm number will increment the same counter.
+ So, in this memory mapping:
+ csrow0: channel 0, dimm0
+ csrow1: channel 0, dimm1
+ csrow2: channel 1, dimm0
+ csrow3: channel 2, dimm0
+ The hardware will increment udimm0 for an error at the first dimm at either
+ csrow0, csrow2 or csrow3;
+ The hardware will increment udimm1 for an error at the second dimm at either
+ csrow0, csrow2 or csrow3;
+ The hardware will increment udimm2 for an error at the third dimm at either
+ csrow0, csrow2 or csrow3;
+
+4) Standard error counters
+
+ The standard error counters are generated when an mcelog error is received
+ by the driver. Since, with udimm, this is counted by software, it is
+ possible that some errors could be lost. With rdimm's, they displays the
+ contents of the registers
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index a86152a..c268783 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -578,15 +578,6 @@
----------------------------
-What: "acpi=ht" boot option
-When: 2.6.35
-Why: Useful in 2003, implementation is a hack.
- Generally invoked by accident today.
- Seen as doing more harm than good.
-Who: Len Brown <len.brown@intel.com>
-
-----------------------------
-
What: iwlwifi 50XX module parameters
When: 2.6.40
Why: The "..50" modules parameters were used to configure 5000 series and
@@ -646,3 +637,13 @@
----------------------------
+What: old ieee1394 subsystem (CONFIG_IEEE1394)
+When: 2.6.37
+Files: drivers/ieee1394/ except init_ohci1394_dma.c
+Why: superseded by drivers/firewire/ (CONFIG_FIREWIRE) which offers more
+ features, better performance, and better security, all with smaller
+ and more modern code base
+Who: Stefan Richter <stefanr@s5r6.in-berlin.de>
+
+----------------------------
+
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index af16080..96d4293 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -380,7 +380,7 @@
int (*open) (struct inode *, struct file *);
int (*flush) (struct file *);
int (*release) (struct inode *, struct file *);
- int (*fsync) (struct file *, struct dentry *, int datasync);
+ int (*fsync) (struct file *, int datasync);
int (*aio_fsync) (struct kiocb *, int datasync);
int (*fasync) (int, struct file *, int);
int (*lock) (struct file *, int, struct file_lock *);
@@ -429,8 +429,9 @@
implementations. If your fs is not using generic_file_llseek, you
need to acquire and release the appropriate locks in your ->llseek().
For many filesystems, it is probably safe to acquire the inode
-mutex. Note some filesystems (i.e. remote ones) provide no
-protection for i_size so you will need to use the BKL.
+mutex or just to use i_size_read() instead.
+Note: this does not protect the file->f_pos against concurrent modifications
+since this is something the userspace has to take care about.
Note: ext2_release() was *the* source of contention on fs-intensive
loads and dropping BKL on ->release() helps to get rid of that (we still
diff --git a/Documentation/filesystems/squashfs.txt b/Documentation/filesystems/squashfs.txt
index b324c03..203f720 100644
--- a/Documentation/filesystems/squashfs.txt
+++ b/Documentation/filesystems/squashfs.txt
@@ -38,7 +38,8 @@
Real inode numbers: yes no
32-bit uids/gids: yes no
File creation time: yes no
-Xattr and ACL support: no no
+Xattr support: yes no
+ACL support: no no
Squashfs compresses data, inodes and directories. In addition, inode and
directory data are highly compacted, and packed on byte boundaries. Each
@@ -58,7 +59,7 @@
3. SQUASHFS FILESYSTEM DESIGN
-----------------------------
-A squashfs filesystem consists of seven parts, packed together on a byte
+A squashfs filesystem consists of a maximum of eight parts, packed together on a byte
alignment:
---------------
@@ -80,6 +81,9 @@
|---------------|
| uid/gid |
| lookup table |
+ |---------------|
+ | xattr |
+ | table |
---------------
Compressed data blocks are written to the filesystem as files are read from
@@ -192,6 +196,26 @@
used to locate these. This second index table for speed of access (and because
it is small) is read at mount time and cached in memory.
+3.7 Xattr table
+---------------
+
+The xattr table contains extended attributes for each inode. The xattrs
+for each inode are stored in a list, each list entry containing a type,
+name and value field. The type field encodes the xattr prefix
+("user.", "trusted." etc) and it also encodes how the name/value fields
+should be interpreted. Currently the type indicates whether the value
+is stored inline (in which case the value field contains the xattr value),
+or if it is stored out of line (in which case the value field stores a
+reference to where the actual value is stored). This allows large values
+to be stored out of line improving scanning and lookup performance and it
+also allows values to be de-duplicated, the value being stored once, and
+all other occurences holding an out of line reference to that value.
+
+The xattr lists are packed into compressed 8K metadata blocks.
+To reduce overhead in inodes, rather than storing the on-disk
+location of the xattr list inside each inode, a 32-bit xattr id
+is stored. This xattr id is mapped into the location of the xattr
+list using a second xattr id lookup table.
4. TODOS AND OUTSTANDING ISSUES
-------------------------------
@@ -199,9 +223,7 @@
4.1 Todo list
-------------
-Implement Xattr and ACL support. The Squashfs 4.0 filesystem layout has hooks
-for these but the code has not been written. Once the code has been written
-the existing layout should not require modification.
+Implement ACL support.
4.2 Squashfs internal cache
---------------------------
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index b668585..94677e7 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -401,11 +401,16 @@
started might not be in the page cache at the end of the
walk).
- truncate: called by the VFS to change the size of a file. The
+ truncate: Deprecated. This will not be called if ->setsize is defined.
+ Called by the VFS to change the size of a file. The
i_size field of the inode is set to the desired size by the
VFS before this method is called. This method is called by
the truncate(2) system call and related functionality.
+ Note: ->truncate and vmtruncate are deprecated. Do not add new
+ instances/calls of these. Filesystems should be converted to do their
+ truncate sequence via ->setattr().
+
permission: called by the VFS to check for access rights on a POSIX-like
filesystem.
@@ -729,7 +734,7 @@
int (*open) (struct inode *, struct file *);
int (*flush) (struct file *);
int (*release) (struct inode *, struct file *);
- int (*fsync) (struct file *, struct dentry *, int datasync);
+ int (*fsync) (struct file *, int datasync);
int (*aio_fsync) (struct kiocb *, int datasync);
int (*fasync) (int, struct file *, int);
int (*lock) (struct file *, int, struct file_lock *);
diff --git a/Documentation/filesystems/xfs-delayed-logging-design.txt b/Documentation/filesystems/xfs-delayed-logging-design.txt
index d8119e9..96d0df2 100644
--- a/Documentation/filesystems/xfs-delayed-logging-design.txt
+++ b/Documentation/filesystems/xfs-delayed-logging-design.txt
@@ -794,11 +794,6 @@
Roadmap:
-2.6.35 Inclusion in mainline as an experimental mount option
- => approximately 2-3 months to merge window
- => needs to be in xfs-dev tree in 4-6 weeks
- => code is nearing readiness for review
-
2.6.37 Remove experimental tag from mount option
=> should be roughly 6 months after initial merge
=> enough time to:
diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737
index 001d2e7..fc5df76 100644
--- a/Documentation/hwmon/dme1737
+++ b/Documentation/hwmon/dme1737
@@ -9,11 +9,15 @@
* SMSC SCH3112, SCH3114, SCH3116
Prefix: 'sch311x'
Addresses scanned: none, address read from Super-I/O config space
- Datasheet: http://www.nuhorizons.com/FeaturedProducts/Volume1/SMSC/311x.pdf
+ Datasheet: Available on the Internet
* SMSC SCH5027
Prefix: 'sch5027'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
Datasheet: Provided by SMSC upon request and under NDA
+ * SMSC SCH5127
+ Prefix: 'sch5127'
+ Addresses scanned: none, address read from Super-I/O config space
+ Datasheet: Provided by SMSC upon request and under NDA
Authors:
Juerg Haefliger <juergh@gmail.com>
@@ -36,8 +40,8 @@
-----------
This driver implements support for the hardware monitoring capabilities of the
-SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, and SMSC
-SCH311x Super-I/O chips. These chips feature monitoring of 3 temp sensors
+SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, SCH311x,
+and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors
temp[1-3] (2 remote diodes and 1 internal), 7 voltages in[0-6] (6 external and
1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
@@ -48,14 +52,14 @@
the configuration of the chip. The driver will detect which features are
present during initialization and create the sysfs attributes accordingly.
-For the SCH311x, fan[1-3] and pwm[1-3] are always present and fan[4-6] and
-pwm[5-6] don't exist.
+For the SCH311x and SCH5127, fan[1-3] and pwm[1-3] are always present and
+fan[4-6] and pwm[5-6] don't exist.
The hardware monitoring features of the DME1737, A8000, and SCH5027 are only
-accessible via SMBus, while the SCH311x only provides access via the ISA bus.
-The driver will therefore register itself as an I2C client driver if it detects
-a DME1737, A8000, or SCH5027 and as a platform driver if it detects a SCH311x
-chip.
+accessible via SMBus, while the SCH311x and SCH5127 only provide access via
+the ISA bus. The driver will therefore register itself as an I2C client driver
+if it detects a DME1737, A8000, or SCH5027 and as a platform driver if it
+detects a SCH311x or SCH5127 chip.
Voltage Monitoring
@@ -76,7 +80,7 @@
in6: Vbat (+3.0V) 0V - 4.38V
SCH311x:
- in0: +2.5V 0V - 6.64V
+ in0: +2.5V 0V - 3.32V
in1: Vccp (processor core) 0V - 2V
in2: VCC (internal +3.3V) 0V - 4.38V
in3: +5V 0V - 6.64V
@@ -93,6 +97,15 @@
in5: VTR (+3.3V standby) 0V - 4.38V
in6: Vbat (+3.0V) 0V - 4.38V
+SCH5127:
+ in0: +2.5 0V - 3.32V
+ in1: Vccp (processor core) 0V - 3V
+ in2: VCC (internal +3.3V) 0V - 4.38V
+ in3: V2_IN 0V - 1.5V
+ in4: V1_IN 0V - 1.5V
+ in5: VTR (+3.3V standby) 0V - 4.38V
+ in6: Vbat (+3.0V) 0V - 4.38V
+
Each voltage input has associated min and max limits which trigger an alarm
when crossed.
@@ -293,3 +306,21 @@
pwm[1-3]_auto_point2_pwm RO Auto PWM pwm point. Auto_point2 is the
full-speed duty-cycle which is hard-
wired to 255 (100% duty-cycle).
+
+Chip Differences
+----------------
+
+Feature dme1737 sch311x sch5027 sch5127
+-------------------------------------------------------
+temp[1-3]_offset yes yes
+vid yes
+zone3 yes yes yes
+zone[1-3]_hyst yes yes
+pwm min/off yes yes
+fan3 opt yes opt yes
+pwm3 opt yes opt yes
+fan4 opt opt
+fan5 opt opt
+pwm5 opt opt
+fan6 opt opt
+pwm6 opt opt
diff --git a/Documentation/hwmon/lm63 b/Documentation/hwmon/lm63
index 31660bf..b9843ea 100644
--- a/Documentation/hwmon/lm63
+++ b/Documentation/hwmon/lm63
@@ -7,6 +7,11 @@
Addresses scanned: I2C 0x4c
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM63.html
+ * National Semiconductor LM64
+ Prefix: 'lm64'
+ Addresses scanned: I2C 0x18 and 0x4e
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/pf/LM/LM64.html
Author: Jean Delvare <khali@linux-fr.org>
@@ -55,3 +60,5 @@
second; reading them more often will do no harm, but will return 'old'
values.
+The LM64 is effectively an LM63 with GPIO lines. The driver does not
+support these GPIO lines at present.
diff --git a/Documentation/hwmon/ltc4245 b/Documentation/hwmon/ltc4245
index 02838a4..86b5880 100644
--- a/Documentation/hwmon/ltc4245
+++ b/Documentation/hwmon/ltc4245
@@ -72,9 +72,7 @@
in7_min_alarm 3v output undervoltage alarm
in8_min_alarm Vee (-12v) output undervoltage alarm
-in9_input GPIO #1 voltage data
-in10_input GPIO #2 voltage data
-in11_input GPIO #3 voltage data
+in9_input GPIO voltage data
power1_input 12v power usage (mW)
power2_input 5v power usage (mW)
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 3de6b0b..d4e2917 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -80,9 +80,9 @@
given driver if the chip has the feature.
-********
-* Name *
-********
+*********************
+* Global attributes *
+*********************
name The chip name.
This should be a short, lowercase string, not containing
@@ -91,6 +91,13 @@
I2C devices get this attribute created automatically.
RO
+update_rate The rate at which the chip will update readings.
+ Unit: millisecond
+ RW
+ Some devices have a variable update rate. This attribute
+ can be used to change the update rate to the desired
+ frequency.
+
************
* Voltages *
diff --git a/Documentation/hwmon/tmp102 b/Documentation/hwmon/tmp102
new file mode 100644
index 0000000..8454a77
--- /dev/null
+++ b/Documentation/hwmon/tmp102
@@ -0,0 +1,26 @@
+Kernel driver tmp102
+====================
+
+Supported chips:
+ * Texas Instruments TMP102
+ Prefix: 'tmp102'
+ Addresses scanned: none
+ Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp102.html
+
+Author:
+ Steven King <sfking@fdwdc.com>
+
+Description
+-----------
+
+The Texas Instruments TMP102 implements one temperature sensor. Limits can be
+set through the Overtemperature Shutdown register and Hysteresis register. The
+sensor is accurate to 0.5 degree over the range of -25 to +85 C, and to 1.0
+degree from -40 to +125 C. Resolution of the sensor is 0.0625 degree. The
+operating temperature has a minimum of -55 C and a maximum of +150 C.
+
+The TMP102 has a programmable update rate that can select between 8, 4, 1, and
+0.5 Hz. (Currently the driver only supports the default of 4 Hz).
+
+The driver provides the common sysfs-interface for temperatures (see
+Documentation/hwmon/sysfs-interface under Temperatures).
diff --git a/Documentation/i2c/busses/i2c-ali1535 b/Documentation/i2c/busses/i2c-ali1535
index 0db3b4c..acbc65a 100644
--- a/Documentation/i2c/busses/i2c-ali1535
+++ b/Documentation/i2c/busses/i2c-ali1535
@@ -6,12 +6,12 @@
http://www.ali.com.tw/eng/support/datasheet_request.php
Authors:
- Frodo Looijaard <frodol@dds.nl>,
+ Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Mark D. Studebaker <mdsxyz123@yahoo.com>,
Dan Eaton <dan.eaton@rocketlogix.com>,
Stephen Rousset<stephen.rousset@rocketlogix.com>
-
+
Description
-----------
diff --git a/Documentation/i2c/busses/i2c-ali1563 b/Documentation/i2c/busses/i2c-ali1563
index 99ad4b9..5469169 100644
--- a/Documentation/i2c/busses/i2c-ali1563
+++ b/Documentation/i2c/busses/i2c-ali1563
@@ -18,7 +18,7 @@
The M1563 southbridge is deceptively similar to the M1533, with a few
notable exceptions. One of those happens to be the fact they upgraded the
i2c core to be SMBus 2.0 compliant, and happens to be almost identical to
-the i2c controller found in the Intel 801 south bridges.
+the i2c controller found in the Intel 801 south bridges.
Features
--------
diff --git a/Documentation/i2c/busses/i2c-ali15x3 b/Documentation/i2c/busses/i2c-ali15x3
index ff28d38..600da90 100644
--- a/Documentation/i2c/busses/i2c-ali15x3
+++ b/Documentation/i2c/busses/i2c-ali15x3
@@ -6,8 +6,8 @@
http://www.ali.com.tw/eng/support/datasheet_request.php
Authors:
- Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
+ Frodo Looijaard <frodol@dds.nl>,
+ Philip Edelbrock <phil@netroedge.com>,
Mark D. Studebaker <mdsxyz123@yahoo.com>
Module Parameters
@@ -40,10 +40,10 @@
The M1543C is a South bridge for desktop systems.
The M1541 is a South bridge for portable systems.
They are part of the following ALI chipsets:
-
- * "Aladdin Pro 2" includes the M1621 Slot 1 North bridge with AGP and
+
+ * "Aladdin Pro 2" includes the M1621 Slot 1 North bridge with AGP and
100MHz CPU Front Side bus
- * "Aladdin V" includes the M1541 Socket 7 North bridge with AGP and 100MHz
+ * "Aladdin V" includes the M1541 Socket 7 North bridge with AGP and 100MHz
CPU Front Side bus
Some Aladdin V motherboards:
Asus P5A
@@ -77,7 +77,7 @@
** then run lspci.
** If you see the 1533 and 5229 devices but NOT the 7101 device,
** then you must enable ACPI, the PMU, SMB, or something similar
-** in the BIOS.
+** in the BIOS.
** The driver won't work if it can't find the M7101 device.
The SMB controller is part of the M7101 device, which is an ACPI-compliant
@@ -87,8 +87,8 @@
just enable the SMB alone. The SMB and the ACPI have separate I/O spaces.
We make sure that the SMB is enabled. We leave the ACPI alone.
-Features
---------
+Features
+--------
This driver controls the SMB Host only. The SMB Slave
controller on the M15X3 is not enabled. This driver does not use
diff --git a/Documentation/i2c/busses/i2c-pca-isa b/Documentation/i2c/busses/i2c-pca-isa
index 6fc8f4c..b044e52 100644
--- a/Documentation/i2c/busses/i2c-pca-isa
+++ b/Documentation/i2c/busses/i2c-pca-isa
@@ -1,10 +1,10 @@
Kernel driver i2c-pca-isa
Supported adapters:
-This driver supports ISA boards using the Philips PCA 9564
-Parallel bus to I2C bus controller
+This driver supports ISA boards using the Philips PCA 9564
+Parallel bus to I2C bus controller
-Author: Ian Campbell <icampbell@arcom.com>, Arcom Control Systems
+Author: Ian Campbell <icampbell@arcom.com>, Arcom Control Systems
Module Parameters
-----------------
@@ -12,12 +12,12 @@
* base int
I/O base address
* irq int
- IRQ interrupt
-* clock int
+ IRQ interrupt
+* clock int
Clock rate as described in table 1 of PCA9564 datasheet
Description
-----------
-This driver supports ISA boards using the Philips PCA 9564
-Parallel bus to I2C bus controller
+This driver supports ISA boards using the Philips PCA 9564
+Parallel bus to I2C bus controller
diff --git a/Documentation/i2c/busses/i2c-sis5595 b/Documentation/i2c/busses/i2c-sis5595
index cc47db7..ecd21fb 100644
--- a/Documentation/i2c/busses/i2c-sis5595
+++ b/Documentation/i2c/busses/i2c-sis5595
@@ -1,41 +1,41 @@
Kernel driver i2c-sis5595
-Authors:
+Authors:
Frodo Looijaard <frodol@dds.nl>,
Mark D. Studebaker <mdsxyz123@yahoo.com>,
- Philip Edelbrock <phil@netroedge.com>
+ Philip Edelbrock <phil@netroedge.com>
Supported adapters:
* Silicon Integrated Systems Corp. SiS5595 Southbridge
Datasheet: Publicly available at the Silicon Integrated Systems Corp. site.
-Note: all have mfr. ID 0x1039.
+Note: all have mfr. ID 0x1039.
- SUPPORTED PCI ID
- 5595 0008
-
- Note: these chips contain a 0008 device which is incompatible with the
- 5595. We recognize these by the presence of the listed
- "blacklist" PCI ID and refuse to load.
-
- NOT SUPPORTED PCI ID BLACKLIST PCI ID
- 540 0008 0540
- 550 0008 0550
- 5513 0008 5511
- 5581 0008 5597
- 5582 0008 5597
- 5597 0008 5597
- 5598 0008 5597/5598
- 630 0008 0630
- 645 0008 0645
- 646 0008 0646
- 648 0008 0648
- 650 0008 0650
- 651 0008 0651
- 730 0008 0730
- 735 0008 0735
- 745 0008 0745
- 746 0008 0746
+ SUPPORTED PCI ID
+ 5595 0008
+
+ Note: these chips contain a 0008 device which is incompatible with the
+ 5595. We recognize these by the presence of the listed
+ "blacklist" PCI ID and refuse to load.
+
+ NOT SUPPORTED PCI ID BLACKLIST PCI ID
+ 540 0008 0540
+ 550 0008 0550
+ 5513 0008 5511
+ 5581 0008 5597
+ 5582 0008 5597
+ 5597 0008 5597
+ 5598 0008 5597/5598
+ 630 0008 0630
+ 645 0008 0645
+ 646 0008 0646
+ 648 0008 0648
+ 650 0008 0650
+ 651 0008 0651
+ 730 0008 0730
+ 735 0008 0735
+ 745 0008 0745
+ 746 0008 0746
Module Parameters
-----------------
diff --git a/Documentation/i2c/busses/i2c-sis630 b/Documentation/i2c/busses/i2c-sis630
index 9aca688..629ea2c 100644
--- a/Documentation/i2c/busses/i2c-sis630
+++ b/Documentation/i2c/busses/i2c-sis630
@@ -14,9 +14,9 @@
* force = [1|0] Forcibly enable the SIS630. DANGEROUS!
This can be interesting for chipsets not named
above to check if it works for you chipset, but DANGEROUS!
-
-* high_clock = [1|0] Forcibly set Host Master Clock to 56KHz (default,
- what your BIOS use). DANGEROUS! This should be a bit
+
+* high_clock = [1|0] Forcibly set Host Master Clock to 56KHz (default,
+ what your BIOS use). DANGEROUS! This should be a bit
faster, but freeze some systems (i.e. my Laptop).
@@ -44,6 +44,6 @@
- testing SiS730 support
Mark M. Hoffman <mhoffman@lightlink.com>
- bug fixes
-
+
To anyone else which I forgot here ;), thanks!
diff --git a/Documentation/i2c/ten-bit-addresses b/Documentation/i2c/ten-bit-addresses
index 200074f..e989070 100644
--- a/Documentation/i2c/ten-bit-addresses
+++ b/Documentation/i2c/ten-bit-addresses
@@ -1,17 +1,17 @@
-The I2C protocol knows about two kinds of device addresses: normal 7 bit
+The I2C protocol knows about two kinds of device addresses: normal 7 bit
addresses, and an extended set of 10 bit addresses. The sets of addresses
do not intersect: the 7 bit address 0x10 is not the same as the 10 bit
address 0x10 (though a single device could respond to both of them). You
select a 10 bit address by adding an extra byte after the address
byte:
- S Addr7 Rd/Wr ....
+ S Addr7 Rd/Wr ....
becomes
S 11110 Addr10 Rd/Wr
S is the start bit, Rd/Wr the read/write bit, and if you count the number
of bits, you will see the there are 8 after the S bit for 7 bit addresses,
and 16 after the S bit for 10 bit addresses.
-WARNING! The current 10 bit address support is EXPERIMENTAL. There are
+WARNING! The current 10 bit address support is EXPERIMENTAL. There are
several places in the code that will cause SEVERE PROBLEMS with 10 bit
addresses, even though there is some basic handling and hooks. Also,
almost no supported adapter handles the 10 bit addresses correctly.
diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt
index 6f8c1ca..634c625 100644
--- a/Documentation/kbuild/kbuild.txt
+++ b/Documentation/kbuild/kbuild.txt
@@ -65,7 +65,7 @@
Specify an optional fixed part of the binutils filename.
CROSS_COMPILE can be a part of the filename or the full path.
-CROSS_COMPILE is also used for ccache is some setups.
+CROSS_COMPILE is also used for ccache in some setups.
CF
--------------------------------------------------
@@ -162,3 +162,7 @@
to be included in the databases, separated by blank space. E.g.:
$ make ALLSOURCE_ARCHS="x86 mips arm" tags
+
+To get all available archs you can also specify all. E.g.:
+
+ $ make ALLSOURCE_ARCHS=all tags
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index b56ea86..4ddb58d 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -145,11 +145,10 @@
acpi= [HW,ACPI,X86]
Advanced Configuration and Power Interface
- Format: { force | off | ht | strict | noirq | rsdt }
+ Format: { force | off | strict | noirq | rsdt }
force -- enable ACPI if default was off
off -- disable ACPI if default was on
noirq -- do not use ACPI for IRQ routing
- ht -- run only enough ACPI to enable Hyper Threading
strict -- Be less tolerant of platforms that are not
strictly ACPI specification compliant.
rsdt -- prefer RSDT over (default) XSDT
@@ -758,6 +757,10 @@
Default value is 0.
Value can be changed at runtime via /selinux/enforce.
+ erst_disable [ACPI]
+ Disable Error Record Serialization Table (ERST)
+ support.
+
ether= [HW,NET] Ethernet cards parameters
This option is obsoleted by the "netdev=" option, which
has equivalent usage. See its documentation for details.
@@ -852,6 +855,11 @@
hd= [EIDE] (E)IDE hard drive subsystem geometry
Format: <cyl>,<head>,<sect>
+ hest_disable [ACPI]
+ Disable Hardware Error Source Table (HEST) support;
+ corresponding firmware-first mode error processing
+ logic will be disabled.
+
highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact
size of <nn>. This works even on boxes that have no
highmem otherwise. This also works to reduce highmem
@@ -1252,10 +1260,12 @@
* nohrst, nosrst, norst: suppress hard, soft
and both resets.
+ * dump_id: dump IDENTIFY data.
+
If there are multiple matching configurations changing
the same attribute, the last one is used.
- lmb=debug [KNL] Enable lmb debug messages.
+ memblock=debug [KNL] Enable memblock debug messages.
load_ramdisk= [RAM] List of ramdisks to load from floppy
See Documentation/blockdev/ramdisk.txt.
@@ -2038,7 +2048,9 @@
WARNING: Forcing ASPM on may cause system lockups.
pcie_pme= [PCIE,PM] Native PCIe PME signaling options:
- off Do not use native PCIe PME signaling.
+ Format: {auto|force}[,nomsi]
+ auto Use native PCIe PME signaling if the BIOS allows the
+ kernel to control PCIe config registers of root ports.
force Use native PCIe PME signaling even if the BIOS refuses
to allow the kernel to control the relevant PCIe config
registers.
diff --git a/Documentation/mutex-design.txt b/Documentation/mutex-design.txt
index aa60d1f..c91ccc0 100644
--- a/Documentation/mutex-design.txt
+++ b/Documentation/mutex-design.txt
@@ -66,14 +66,14 @@
c0377ccb <mutex_lock>:
c0377ccb: f0 ff 08 lock decl (%eax)
- c0377cce: 78 0e js c0377cde <.text.lock.mutex>
+ c0377cce: 78 0e js c0377cde <.text..lock.mutex>
c0377cd0: c3 ret
the unlocking fastpath is equally tight:
c0377cd1 <mutex_unlock>:
c0377cd1: f0 ff 00 lock incl (%eax)
- c0377cd4: 7e 0f jle c0377ce5 <.text.lock.mutex+0x7>
+ c0377cd4: 7e 0f jle c0377ce5 <.text..lock.mutex+0x7>
c0377cd6: c3 ret
- 'struct mutex' semantics are well-defined and are enforced if
diff --git a/Documentation/timers/Makefile b/Documentation/timers/Makefile
index c85625f..73f75f8 100644
--- a/Documentation/timers/Makefile
+++ b/Documentation/timers/Makefile
@@ -2,7 +2,7 @@
obj- := dummy.o
# List of programs to build
-hostprogs-y := hpet_example
+hostprogs-$(CONFIG_X86) := hpet_example
# Tell kbuild to always build the programs
always := $(hostprogs-y)
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 070f257..1387a69 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -176,5 +176,6 @@
175 -> Leadtek Winfast DTV1000S [107d:6655]
176 -> Beholder BeholdTV 505 RDS [0000:5051]
177 -> Hawell HW-404M7
-179 -> Beholder BeholdTV H7 [5ace:7190]
-180 -> Beholder BeholdTV A7 [5ace:7090]
+178 -> Beholder BeholdTV H7 [5ace:7190]
+179 -> Beholder BeholdTV A7 [5ace:7090]
+180 -> Avermedia M733A [1461:4155,1461:4255]
diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner
index 9b2e0dd..e67c1db 100644
--- a/Documentation/video4linux/CARDLIST.tuner
+++ b/Documentation/video4linux/CARDLIST.tuner
@@ -82,3 +82,4 @@
tuner=82 - Philips CU1216L
tuner=83 - NXP TDA18271
tuner=84 - Sony BTF-Pxn01Z
+tuner=85 - Philips FQ1236 MK5
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 8f3f5d3..f13eb03 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -290,6 +290,7 @@
sonixj 0c45:6040 Speed NVC 350K
sonixj 0c45:607c Sonix sn9c102p Hv7131R
sonixj 0c45:60c0 Sangha Sn535
+sonixj 0c45:60ce USB-PC-Camera-168 (TALK-5067)
sonixj 0c45:60ec SN9C105+MO4000
sonixj 0c45:60fb Surfer NoName
sonixj 0c45:60fc LG-LIC300
diff --git a/Documentation/vm/numa b/Documentation/vm/numa
index e93ad94..a200a38 100644
--- a/Documentation/vm/numa
+++ b/Documentation/vm/numa
@@ -1,41 +1,149 @@
Started Nov 1999 by Kanoj Sarcar <kanoj@sgi.com>
-The intent of this file is to have an uptodate, running commentary
-from different people about NUMA specific code in the Linux vm.
+What is NUMA?
-What is NUMA? It is an architecture where the memory access times
-for different regions of memory from a given processor varies
-according to the "distance" of the memory region from the processor.
-Each region of memory to which access times are the same from any
-cpu, is called a node. On such architectures, it is beneficial if
-the kernel tries to minimize inter node communications. Schemes
-for this range from kernel text and read-only data replication
-across nodes, and trying to house all the data structures that
-key components of the kernel need on memory on that node.
+This question can be answered from a couple of perspectives: the
+hardware view and the Linux software view.
-Currently, all the numa support is to provide efficient handling
-of widely discontiguous physical memory, so architectures which
-are not NUMA but can have huge holes in the physical address space
-can use the same code. All this code is bracketed by CONFIG_DISCONTIGMEM.
+From the hardware perspective, a NUMA system is a computer platform that
+comprises multiple components or assemblies each of which may contain 0
+or more CPUs, local memory, and/or IO buses. For brevity and to
+disambiguate the hardware view of these physical components/assemblies
+from the software abstraction thereof, we'll call the components/assemblies
+'cells' in this document.
-The initial port includes NUMAizing the bootmem allocator code by
-encapsulating all the pieces of information into a bootmem_data_t
-structure. Node specific calls have been added to the allocator.
-In theory, any platform which uses the bootmem allocator should
-be able to put the bootmem and mem_map data structures anywhere
-it deems best.
+Each of the 'cells' may be viewed as an SMP [symmetric multi-processor] subset
+of the system--although some components necessary for a stand-alone SMP system
+may not be populated on any given cell. The cells of the NUMA system are
+connected together with some sort of system interconnect--e.g., a crossbar or
+point-to-point link are common types of NUMA system interconnects. Both of
+these types of interconnects can be aggregated to create NUMA platforms with
+cells at multiple distances from other cells.
-Each node's page allocation data structures have also been encapsulated
-into a pg_data_t. The bootmem_data_t is just one part of this. To
-make the code look uniform between NUMA and regular UMA platforms,
-UMA platforms have a statically allocated pg_data_t too (contig_page_data).
-For the sake of uniformity, the function num_online_nodes() is also defined
-for all platforms. As we run benchmarks, we might decide to NUMAize
-more variables like low_on_memory, nr_free_pages etc into the pg_data_t.
+For Linux, the NUMA platforms of interest are primarily what is known as Cache
+Coherent NUMA or ccNUMA systems. With ccNUMA systems, all memory is visible
+to and accessible from any CPU attached to any cell and cache coherency
+is handled in hardware by the processor caches and/or the system interconnect.
-The NUMA aware page allocation code currently tries to allocate pages
-from different nodes in a round robin manner. This will be changed to
-do concentratic circle search, starting from current node, once the
-NUMA port achieves more maturity. The call alloc_pages_node has been
-added, so that drivers can make the call and not worry about whether
-it is running on a NUMA or UMA platform.
+Memory access time and effective memory bandwidth varies depending on how far
+away the cell containing the CPU or IO bus making the memory access is from the
+cell containing the target memory. For example, access to memory by CPUs
+attached to the same cell will experience faster access times and higher
+bandwidths than accesses to memory on other, remote cells. NUMA platforms
+can have cells at multiple remote distances from any given cell.
+
+Platform vendors don't build NUMA systems just to make software developers'
+lives interesting. Rather, this architecture is a means to provide scalable
+memory bandwidth. However, to achieve scalable memory bandwidth, system and
+application software must arrange for a large majority of the memory references
+[cache misses] to be to "local" memory--memory on the same cell, if any--or
+to the closest cell with memory.
+
+This leads to the Linux software view of a NUMA system:
+
+Linux divides the system's hardware resources into multiple software
+abstractions called "nodes". Linux maps the nodes onto the physical cells
+of the hardware platform, abstracting away some of the details for some
+architectures. As with physical cells, software nodes may contain 0 or more
+CPUs, memory and/or IO buses. And, again, memory accesses to memory on
+"closer" nodes--nodes that map to closer cells--will generally experience
+faster access times and higher effective bandwidth than accesses to more
+remote cells.
+
+For some architectures, such as x86, Linux will "hide" any node representing a
+physical cell that has no memory attached, and reassign any CPUs attached to
+that cell to a node representing a cell that does have memory. Thus, on
+these architectures, one cannot assume that all CPUs that Linux associates with
+a given node will see the same local memory access times and bandwidth.
+
+In addition, for some architectures, again x86 is an example, Linux supports
+the emulation of additional nodes. For NUMA emulation, linux will carve up
+the existing nodes--or the system memory for non-NUMA platforms--into multiple
+nodes. Each emulated node will manage a fraction of the underlying cells'
+physical memory. NUMA emluation is useful for testing NUMA kernel and
+application features on non-NUMA platforms, and as a sort of memory resource
+management mechanism when used together with cpusets.
+[see Documentation/cgroups/cpusets.txt]
+
+For each node with memory, Linux constructs an independent memory management
+subsystem, complete with its own free page lists, in-use page lists, usage
+statistics and locks to mediate access. In addition, Linux constructs for
+each memory zone [one or more of DMA, DMA32, NORMAL, HIGH_MEMORY, MOVABLE],
+an ordered "zonelist". A zonelist specifies the zones/nodes to visit when a
+selected zone/node cannot satisfy the allocation request. This situation,
+when a zone has no available memory to satisfy a request, is called
+"overflow" or "fallback".
+
+Because some nodes contain multiple zones containing different types of
+memory, Linux must decide whether to order the zonelists such that allocations
+fall back to the same zone type on a different node, or to a different zone
+type on the same node. This is an important consideration because some zones,
+such as DMA or DMA32, represent relatively scarce resources. Linux chooses
+a default zonelist order based on the sizes of the various zone types relative
+to the total memory of the node and the total memory of the system. The
+default zonelist order may be overridden using the numa_zonelist_order kernel
+boot parameter or sysctl. [see Documentation/kernel-parameters.txt and
+Documentation/sysctl/vm.txt]
+
+By default, Linux will attempt to satisfy memory allocation requests from the
+node to which the CPU that executes the request is assigned. Specifically,
+Linux will attempt to allocate from the first node in the appropriate zonelist
+for the node where the request originates. This is called "local allocation."
+If the "local" node cannot satisfy the request, the kernel will examine other
+nodes' zones in the selected zonelist looking for the first zone in the list
+that can satisfy the request.
+
+Local allocation will tend to keep subsequent access to the allocated memory
+"local" to the underlying physical resources and off the system interconnect--
+as long as the task on whose behalf the kernel allocated some memory does not
+later migrate away from that memory. The Linux scheduler is aware of the
+NUMA topology of the platform--embodied in the "scheduling domains" data
+structures [see Documentation/scheduler/sched-domains.txt]--and the scheduler
+attempts to minimize task migration to distant scheduling domains. However,
+the scheduler does not take a task's NUMA footprint into account directly.
+Thus, under sufficient imbalance, tasks can migrate between nodes, remote
+from their initial node and kernel data structures.
+
+System administrators and application designers can restrict a task's migration
+to improve NUMA locality using various CPU affinity command line interfaces,
+such as taskset(1) and numactl(1), and program interfaces such as
+sched_setaffinity(2). Further, one can modify the kernel's default local
+allocation behavior using Linux NUMA memory policy.
+[see Documentation/vm/numa_memory_policy.]
+
+System administrators can restrict the CPUs and nodes' memories that a non-
+privileged user can specify in the scheduling or NUMA commands and functions
+using control groups and CPUsets. [see Documentation/cgroups/CPUsets.txt]
+
+On architectures that do not hide memoryless nodes, Linux will include only
+zones [nodes] with memory in the zonelists. This means that for a memoryless
+node the "local memory node"--the node of the first zone in CPU's node's
+zonelist--will not be the node itself. Rather, it will be the node that the
+kernel selected as the nearest node with memory when it built the zonelists.
+So, default, local allocations will succeed with the kernel supplying the
+closest available memory. This is a consequence of the same mechanism that
+allows such allocations to fallback to other nearby nodes when a node that
+does contain memory overflows.
+
+Some kernel allocations do not want or cannot tolerate this allocation fallback
+behavior. Rather they want to be sure they get memory from the specified node
+or get notified that the node has no free memory. This is usually the case when
+a subsystem allocates per CPU memory resources, for example.
+
+A typical model for making such an allocation is to obtain the node id of the
+node to which the "current CPU" is attached using one of the kernel's
+numa_node_id() or CPU_to_node() functions and then request memory from only
+the node id returned. When such an allocation fails, the requesting subsystem
+may revert to its own fallback path. The slab kernel memory allocator is an
+example of this. Or, the subsystem may choose to disable or not to enable
+itself on allocation failure. The kernel profiling subsystem is an example of
+this.
+
+If the architecture supports--does not hide--memoryless nodes, then CPUs
+attached to memoryless nodes would always incur the fallback path overhead
+or some subsystems would fail to initialize if they attempted to allocated
+memory exclusively from a node without memory. To support such
+architectures transparently, kernel subsystems can use the numa_mem_id()
+or cpu_to_mem() function to locate the "local memory node" for the calling or
+specified CPU. Again, this is the same node from which default, local page
+allocations will be attempted.
diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt
index 41c95cc..17ddd82 100644
--- a/Documentation/watchdog/watchdog-parameters.txt
+++ b/Documentation/watchdog/watchdog-parameters.txt
@@ -125,6 +125,11 @@
nowayout: Watchdog cannot be stopped once started
(default=kernel config parameter)
-------------------------------------------------
+imx2_wdt:
+timeout: Watchdog timeout in seconds (default 60 s)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
indydog:
nowayout: Watchdog cannot be stopped once started
(default=kernel config parameter)
diff --git a/MAINTAINERS b/MAINTAINERS
index a8fe9b4..db3d0f5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -896,11 +896,13 @@
ARM/SAMSUNG ARM ARCHITECTURES
M: Ben Dooks <ben-linux@fluff.org>
+M: Kukjin Kim <kgene.kim@samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.fluff.org/ben/linux/
S: Maintained
-F: arch/arm/plat-s3c/
+F: arch/arm/plat-samsung/
F: arch/arm/plat-s3c24xx/
+F: arch/arm/plat-s5p/
ARM/S3C2410 ARM ARCHITECTURE
M: Ben Dooks <ben-linux@fluff.org>
@@ -969,6 +971,18 @@
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.mcuos.com
S: Maintained
+F: arch/arm/mach-w90x900/
+F: arch/arm/mach-nuc93x/
+F: drivers/input/keyboard/w90p910_keypad.c
+F: drivers/input/touchscreen/w90p910_ts.c
+F: drivers/watchdog/nuc900_wdt.c
+F: drivers/net/arm/w90p910_ether.c
+F: drivers/mtd/nand/w90p910_nand.c
+F: drivers/rtc/rtc-nuc900.c
+F: drivers/spi/spi_nuc900.c
+F: drivers/usb/host/ehci-w90x900.c
+F: drivers/video/nuc900fb.c
+F: drivers/sound/soc/nuc900/
ARM/U300 MACHINE SUPPORT
M: Linus Walleij <linus.walleij@stericsson.com>
@@ -1136,7 +1150,7 @@
F: drivers/mmc/host/atmel-mci-regs.h
ATMEL AT91 / AT32 SERIAL DRIVER
-M: Haavard Skinnemoen <hskinnemoen@atmel.com>
+M: Nicolas Ferre <nicolas.ferre@atmel.com>
S: Supported
F: drivers/serial/atmel_serial.c
@@ -1148,18 +1162,18 @@
F: include/video/atmel_lcdc.h
ATMEL MACB ETHERNET DRIVER
-M: Haavard Skinnemoen <hskinnemoen@atmel.com>
+M: Nicolas Ferre <nicolas.ferre@atmel.com>
S: Supported
F: drivers/net/macb.*
ATMEL SPI DRIVER
-M: Haavard Skinnemoen <hskinnemoen@atmel.com>
+M: Nicolas Ferre <nicolas.ferre@atmel.com>
S: Supported
F: drivers/spi/atmel_spi.*
ATMEL USBA UDC DRIVER
-M: Haavard Skinnemoen <hskinnemoen@atmel.com>
-L: kernel@avr32linux.org
+M: Nicolas Ferre <nicolas.ferre@atmel.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
S: Supported
F: drivers/usb/gadget/atmel_usba_udc.*
@@ -1569,7 +1583,7 @@
COMMON INTERNET FILE SYSTEM (CIFS)
M: Steve French <sfrench@samba.org>
-L: linux-cifs-client@lists.samba.org (moderated for non-subscribers)
+L: linux-cifs@vger.kernel.org
L: samba-technical@lists.samba.org (moderated for non-subscribers)
W: http://linux-cifs.samba.org/
Q: http://patchwork.ozlabs.org/project/linux-cifs-client/list/
@@ -1719,7 +1733,7 @@
F: sound/pci/cs5535audio/
CX18 VIDEO4LINUX DRIVER
-M: Andy Walls <awalls@radix.net>
+M: Andy Walls <awalls@md.metrocast.net>
L: ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -2097,11 +2111,20 @@
EDAC-I5400
M: Mauro Carvalho Chehab <mchehab@redhat.com>
-L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L: linux-edac@vger.kernel.org
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i5400_edac.c
+EDAC-I7CORE
+M: Mauro Carvalho Chehab <mchehab@redhat.com>
+L: linux-edac@vger.kernel.org
+W: bluesmoke.sourceforge.net
+S: Maintained
+F: drivers/edac/i7core_edac.c
+F: drivers/edac/edac_mce.c
+F: include/linux/edac_mce.h
+
EDAC-I82975X
M: Ranganathan Desikan <ravi@jetztechnologies.com>
M: "Arvind R." <arvind@jetztechnologies.com>
@@ -2875,6 +2898,20 @@
S: Maintained
F: drivers/input/
+INPUT MULTITOUCH (MT) PROTOCOL
+M: Henrik Rydberg <rydberg@euromail.se>
+L: linux-input@vger.kernel.org
+S: Maintained
+F: Documentation/input/multi-touch-protocol.txt
+K: \b(ABS|SYN)_MT_
+
+INTEL IDLE DRIVER
+M: Len Brown <lenb@kernel.org>
+L: linux-pm@lists.linux-foundation.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6.git
+S: Supported
+F: drivers/idle/intel_idle.c
+
INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
M: Maik Broemme <mbroemme@plusserver.de>
L: linux-fbdev@vger.kernel.org
@@ -2959,22 +2996,14 @@
F: drivers/net/ixgbe/
INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
-M: Zhu Yi <yi.zhu@intel.com>
-M: Reinette Chatre <reinette.chatre@intel.com>
-M: Intel Linux Wireless <ilw@linux.intel.com>
L: linux-wireless@vger.kernel.org
-W: http://ipw2100.sourceforge.net
-S: Odd Fixes
+S: Orphan
F: Documentation/networking/README.ipw2100
F: drivers/net/wireless/ipw2x00/ipw2100.*
INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT
-M: Zhu Yi <yi.zhu@intel.com>
-M: Reinette Chatre <reinette.chatre@intel.com>
-M: Intel Linux Wireless <ilw@linux.intel.com>
L: linux-wireless@vger.kernel.org
-W: http://ipw2200.sourceforge.net
-S: Odd Fixes
+S: Orphan
F: Documentation/networking/README.ipw2200
F: drivers/net/wireless/ipw2x00/ipw2200.*
@@ -3000,8 +3029,8 @@
F: include/linux/wimax/i2400m.h
INTEL WIRELESS WIFI LINK (iwlwifi)
-M: Zhu Yi <yi.zhu@intel.com>
M: Reinette Chatre <reinette.chatre@intel.com>
+M: Wey-Yi Guy <wey-yi.w.guy@intel.com>
M: Intel Linux Wireless <ilw@linux.intel.com>
L: linux-wireless@vger.kernel.org
W: http://intellinuxwireless.org
@@ -3011,7 +3040,6 @@
INTEL WIRELESS MULTICOMM 3200 WIFI (iwmc3200wifi)
M: Samuel Ortiz <samuel.ortiz@intel.com>
-M: Zhu Yi <yi.zhu@intel.com>
M: Intel Linux Wireless <ilw@linux.intel.com>
L: linux-wireless@vger.kernel.org
S: Supported
@@ -3146,7 +3174,7 @@
F: drivers/hwmon/it87.c
IVTV VIDEO4LINUX DRIVER
-M: Andy Walls <awalls@radix.net>
+M: Andy Walls <awalls@md.metrocast.net>
L: ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -3223,7 +3251,7 @@
S: Maintained
F: fs/autofs4/
-KERNEL BUILD
+KERNEL BUILD + files below scripts/ (unless maintained elsewhere)
M: Michal Marek <mmarek@suse.cz>
T: git git://repo.or.cz/linux-kbuild.git for-next
T: git git://repo.or.cz/linux-kbuild.git for-linus
@@ -3232,6 +3260,9 @@
F: Documentation/kbuild/
F: Makefile
F: scripts/Makefile.*
+F: scripts/basic/
+F: scripts/mk*
+F: scripts/package/
KERNEL JANITORS
L: kernel-janitors@vger.kernel.org
@@ -3360,7 +3391,7 @@
M: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
M: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
M: "David S. Miller" <davem@davemloft.net>
-M: Masami Hiramatsu <mhiramat@redhat.com>
+M: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
S: Maintained
F: Documentation/kprobes.txt
F: include/linux/kprobes.h
@@ -3481,9 +3512,8 @@
LINUX FOR POWERPC PA SEMI PWRFICIENT
M: Olof Johansson <olof@lixom.net>
-W: http://www.pasemi.com/
L: linuxppc-dev@ozlabs.org
-S: Supported
+S: Maintained
F: arch/powerpc/platforms/pasemi/
F: drivers/*/*pasemi*
F: drivers/*/*/*pasemi*
@@ -4194,6 +4224,7 @@
M: Grant Likely <grant.likely@secretlab.ca>
L: devicetree-discuss@lists.ozlabs.org
W: http://fdt.secretlab.ca
+T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
F: drivers/of
F: include/linux/of*.h
@@ -4608,6 +4639,12 @@
L: rtc-linux@googlegroups.com
S: Maintained
+QLOGIC QLA1280 SCSI DRIVER
+M: Michael Reed <mdr@sgi.com>
+L: linux-scsi@vger.kernel.org
+S: Maintained
+F: drivers/scsi/qla1280.[ch]
+
QLOGIC QLA2XXX FC-SCSI DRIVER
M: Andrew Vasquez <andrew.vasquez@qlogic.com>
M: linux-driver@qlogic.com
@@ -4824,6 +4861,9 @@
S: Supported
F: arch/s390/
F: drivers/s390/
+F: fs/partitions/ibm.c
+F: Documentation/s390/
+F: Documentation/DocBook/s390*
S390 NETWORK DRIVERS
M: Ursula Braun <ursula.braun@de.ibm.com>
@@ -4992,6 +5032,12 @@
S: Maintained
F: drivers/mmc/host/sdhci-s3c.c
+SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER
+M: Viresh Kumar <viresh.kumar@st.com>
+L: linux-mmc@vger.kernel.org
+S: Maintained
+F: drivers/mmc/host/sdhci-spear.c
+
SECURITY SUBSYSTEM
M: James Morris <jmorris@namei.org>
L: linux-security-module@vger.kernel.org (suggested Cc:)
@@ -5290,6 +5336,7 @@
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
S: Maintained
F: arch/sparc/
+F: drivers/sbus
SPARC SERIAL DRIVERS
M: "David S. Miller" <davem@davemloft.net>
@@ -5357,6 +5404,7 @@
M: Grant Likely <grant.likely@secretlab.ca>
L: spi-devel-general@lists.sourceforge.net
Q: http://patchwork.kernel.org/project/spi-devel-general/list/
+T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
F: Documentation/spi/
F: drivers/spi/
diff --git a/Makefile b/Makefile
index ebc8225..037ff4e 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
-SUBLEVEL = 34
-EXTRAVERSION =
+SUBLEVEL = 35
+EXTRAVERSION = -rc5
NAME = Sheep on Meth
# *DOCUMENTATION*
@@ -183,11 +183,14 @@
# CROSS_COMPILE can be set on the command line
# make CROSS_COMPILE=ia64-linux-
# Alternatively CROSS_COMPILE can be set in the environment.
+# A third alternative is to store a setting in .config so that plain
+# "make" in the configured kernel build directory always uses that.
# Default value for CROSS_COMPILE is not to prefix executables
# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
export KBUILD_BUILDHOST := $(SUBARCH)
ARCH ?= $(SUBARCH)
CROSS_COMPILE ?=
+CROSS_COMPILE ?= $(CONFIG_CROSS_COMPILE:"%"=%)
# Architecture as present in compile.h
UTS_MACHINE := $(ARCH)
@@ -576,9 +579,6 @@
# disable invalid "can't wrap" optimizations for signed / pointers
KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow)
-# revert to pre-gcc-4.4 behaviour of .eh_frame
-KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
-
# conserve stack if available
KBUILD_CFLAGS += $(call cc-option,-fconserve-stack)
@@ -882,73 +882,11 @@
PHONY += $(vmlinux-dirs)
$(vmlinux-dirs): prepare scripts
$(Q)$(MAKE) $(build)=$@
-ifdef CONFIG_MODULES
- $(Q)$(MAKE) $(modbuiltin)=$@
-endif
-
-# Build the kernel release string
-#
-# The KERNELRELEASE value built here is stored in the file
-# include/config/kernel.release, and is used when executing several
-# make targets, such as "make install" or "make modules_install."
-#
-# The eventual kernel release string consists of the following fields,
-# shown in a hierarchical format to show how smaller parts are concatenated
-# to form the larger and final value, with values coming from places like
-# the Makefile, kernel config options, make command line options and/or
-# SCM tag information.
-#
-# $(KERNELVERSION)
-# $(VERSION) eg, 2
-# $(PATCHLEVEL) eg, 6
-# $(SUBLEVEL) eg, 18
-# $(EXTRAVERSION) eg, -rc6
-# $(localver-full)
-# $(localver)
-# localversion* (files without backups, containing '~')
-# $(CONFIG_LOCALVERSION) (from kernel config setting)
-# $(localver-auto) (only if CONFIG_LOCALVERSION_AUTO is set)
-# ./scripts/setlocalversion (SCM tag, if one exists)
-# $(LOCALVERSION) (from make command line if provided)
-#
-# Note how the final $(localver-auto) string is included *only* if the
-# kernel config option CONFIG_LOCALVERSION_AUTO is selected. Also, at the
-# moment, only git is supported but other SCMs can edit the script
-# scripts/setlocalversion and add the appropriate checks as needed.
-
-pattern = ".*/localversion[^~]*"
-string = $(shell cat /dev/null \
- `find $(objtree) $(srctree) -maxdepth 1 -regex $(pattern) | sort -u`)
-
-localver = $(subst $(space),, $(string) \
- $(patsubst "%",%,$(CONFIG_LOCALVERSION)))
-
-# If CONFIG_LOCALVERSION_AUTO is set scripts/setlocalversion is called
-# and if the SCM is know a tag from the SCM is appended.
-# The appended tag is determined by the SCM used.
-#
-# .scmversion is used when generating rpm packages so we do not loose
-# the version information from the SCM when we do the build of the kernel
-# from the copied source
-ifdef CONFIG_LOCALVERSION_AUTO
-
-ifeq ($(wildcard .scmversion),)
- _localver-auto = $(shell $(CONFIG_SHELL) \
- $(srctree)/scripts/setlocalversion $(srctree))
-else
- _localver-auto = $(shell cat .scmversion 2> /dev/null)
-endif
-
- localver-auto = $(LOCALVERSION)$(_localver-auto)
-endif
-
-localver-full = $(localver)$(localver-auto)
# Store (new) KERNELRELASE string in include/config/kernel.release
-kernelrelease = $(KERNELVERSION)$(localver-full)
include/config/kernel.release: include/config/auto.conf FORCE
$(Q)rm -f $@
- $(Q)echo $(kernelrelease) > $@
+ $(Q)echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" > $@
# Things we need to do before we recursively start building the kernel
@@ -1087,13 +1025,18 @@
# using awk while concatenating to the final file.
PHONY += modules
-modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
+modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
- $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.builtin) > $(objtree)/modules.builtin
@$(kecho) ' Building modules, stage 2.';
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
+modules.builtin: $(vmlinux-dirs:%=%/modules.builtin)
+ $(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin
+
+%/modules.builtin: include/config/auto.conf
+ $(Q)$(MAKE) $(modbuiltin)=$*
+
# Target to prepare building external modules
PHONY += modules_prepare
@@ -1247,7 +1190,9 @@
@echo ' firmware_install- Install all firmware to INSTALL_FW_PATH'
@echo ' (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
@echo ' dir/ - Build all files in dir and below'
- @echo ' dir/file.[ois] - Build specified target only'
+ @echo ' dir/file.[oisS] - Build specified target only'
+ @echo ' dir/file.lst - Build specified mixed source/assembly target only'
+ @echo ' (requires a recent binutils and recent build (System.map))'
@echo ' dir/file.ko - Build module including final link'
@echo ' modules_prepare - Set up for building external modules'
@echo ' tags/TAGS - Generate tags file for editors'
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 24efdfe..3e2e540 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -61,6 +61,9 @@
config NEED_DMA_MAP_STATE
def_bool y
+config NEED_SG_DMA_LENGTH
+ def_bool y
+
config GENERIC_ISA_DMA
bool
default y
diff --git a/arch/alpha/include/asm/bitops.h b/arch/alpha/include/asm/bitops.h
index 1dce24b..adfab8a 100644
--- a/arch/alpha/include/asm/bitops.h
+++ b/arch/alpha/include/asm/bitops.h
@@ -410,7 +410,7 @@
return __kernel_ctpop(w);
}
-static inline unsigned int __arch_weight32(unsigned int w)
+static inline unsigned int __arch_hweight32(unsigned int w)
{
return __arch_hweight64(w);
}
diff --git a/arch/alpha/include/asm/scatterlist.h b/arch/alpha/include/asm/scatterlist.h
index 440747c..5728c52 100644
--- a/arch/alpha/include/asm/scatterlist.h
+++ b/arch/alpha/include/asm/scatterlist.h
@@ -1,24 +1,7 @@
#ifndef _ALPHA_SCATTERLIST_H
#define _ALPHA_SCATTERLIST_H
-#include <asm/page.h>
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset;
-
- unsigned int length;
-
- dma_addr_t dma_address;
- __u32 dma_length;
-};
-
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->dma_length)
+#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (~0UL)
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index 7739a62..5a62fb4 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -35,7 +35,7 @@
obj-y += irq_pyxis.o irq_i8259.o irq_srm.o
obj-y += err_ev6.o
-obj-y += es1888.o smc37c669.o smc37c93x.o ns87312.o gct.o
+obj-y += es1888.o smc37c669.o smc37c93x.o pc873xx.o gct.o
obj-y += srmcons.o
else
@@ -63,11 +63,11 @@
# Board support
obj-$(CONFIG_ALPHA_ALCOR) += sys_alcor.o irq_i8259.o irq_srm.o
obj-$(CONFIG_ALPHA_CABRIOLET) += sys_cabriolet.o irq_i8259.o irq_srm.o \
- ns87312.o
+ pc873xx.o
obj-$(CONFIG_ALPHA_EB164) += sys_cabriolet.o irq_i8259.o irq_srm.o \
- ns87312.o
+ pc873xx.o
obj-$(CONFIG_ALPHA_EB66P) += sys_cabriolet.o irq_i8259.o irq_srm.o \
- ns87312.o
+ pc873xx.o
obj-$(CONFIG_ALPHA_LX164) += sys_cabriolet.o irq_i8259.o irq_srm.o \
smc37c93x.o
obj-$(CONFIG_ALPHA_PC164) += sys_cabriolet.o irq_i8259.o irq_srm.o \
@@ -90,14 +90,14 @@
obj-$(CONFIG_ALPHA_RX164) += sys_rx164.o irq_i8259.o
obj-$(CONFIG_ALPHA_SABLE) += sys_sable.o
obj-$(CONFIG_ALPHA_LYNX) += sys_sable.o
-obj-$(CONFIG_ALPHA_BOOK1) += sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_AVANTI) += sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_NONAME) += sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_P2K) += sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_XL) += sys_sio.o irq_i8259.o irq_srm.o ns87312.o
+obj-$(CONFIG_ALPHA_BOOK1) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_AVANTI) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_NONAME) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_P2K) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_XL) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
obj-$(CONFIG_ALPHA_SX164) += sys_sx164.o irq_pyxis.o irq_i8259.o \
irq_srm.o smc37c669.o
-obj-$(CONFIG_ALPHA_TAKARA) += sys_takara.o irq_i8259.o ns87312.o
+obj-$(CONFIG_ALPHA_TAKARA) += sys_takara.o irq_i8259.o pc873xx.o
obj-$(CONFIG_ALPHA_WILDFIRE) += sys_wildfire.o irq_i8259.o
# Error support
diff --git a/arch/alpha/kernel/ns87312.c b/arch/alpha/kernel/ns87312.c
deleted file mode 100644
index 342b56d..0000000
--- a/arch/alpha/kernel/ns87312.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * linux/arch/alpha/kernel/ns87312.c
- */
-
-#include <linux/init.h>
-#include <asm/io.h>
-#include "proto.h"
-
-
-/*
- * The SRM console *disables* the IDE interface, this code ensures it's
- * enabled.
- *
- * This code bangs on a control register of the 87312 Super I/O chip
- * that implements parallel port/serial ports/IDE/FDI. Depending on
- * the motherboard, the Super I/O chip can be configured through a
- * pair of registers that are located either at I/O ports 0x26e/0x26f
- * or 0x398/0x399. Unfortunately, autodetecting which base address is
- * in use works only once (right after a reset). The Super I/O chip
- * has the additional quirk that configuration register data must be
- * written twice (I believe this is a safety feature to prevent
- * accidental modification---fun, isn't it?).
- */
-
-void __init
-ns87312_enable_ide(long ide_base)
-{
- int data;
- unsigned long flags;
-
- local_irq_save(flags);
- outb(0, ide_base); /* set the index register for reg #0 */
- data = inb(ide_base+1); /* read the current contents */
- outb(0, ide_base); /* set the index register for reg #0 */
- outb(data | 0x40, ide_base+1); /* turn on IDE */
- outb(data | 0x40, ide_base+1); /* turn on IDE, really! */
- local_irq_restore(flags);
-}
diff --git a/arch/alpha/kernel/pc873xx.c b/arch/alpha/kernel/pc873xx.c
new file mode 100644
index 0000000..27dcbff
--- /dev/null
+++ b/arch/alpha/kernel/pc873xx.c
@@ -0,0 +1,88 @@
+#include <linux/ioport.h>
+#include <asm/io.h>
+
+#include "pc873xx.h"
+
+static unsigned pc873xx_probelist[] = {0x398, 0x26e, 0};
+
+static char *pc873xx_names[] = {
+ "PC87303", "PC87306", "PC87312", "PC87332", "PC87334"
+};
+
+static unsigned int base, model;
+
+
+unsigned int __init pc873xx_get_base()
+{
+ return base;
+}
+
+char *__init pc873xx_get_model()
+{
+ return pc873xx_names[model];
+}
+
+static unsigned char __init pc873xx_read(unsigned int base, int reg)
+{
+ outb(reg, base);
+ return inb(base + 1);
+}
+
+static void __init pc873xx_write(unsigned int base, int reg, unsigned char data)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ outb(reg, base);
+ outb(data, base + 1);
+ outb(data, base + 1); /* Must be written twice */
+ local_irq_restore(flags);
+}
+
+int __init pc873xx_probe(void)
+{
+ int val, index = 0;
+
+ while ((base = pc873xx_probelist[index++])) {
+
+ if (request_region(base, 2, "Super IO PC873xx") == NULL)
+ continue;
+
+ val = pc873xx_read(base, REG_SID);
+ if ((val & 0xf0) == 0x10) {
+ model = PC87332;
+ break;
+ } else if ((val & 0xf8) == 0x70) {
+ model = PC87306;
+ break;
+ } else if ((val & 0xf8) == 0x50) {
+ model = PC87334;
+ break;
+ } else if ((val & 0xf8) == 0x40) {
+ model = PC87303;
+ break;
+ }
+
+ release_region(base, 2);
+ }
+
+ return (base == 0) ? -1 : 1;
+}
+
+void __init pc873xx_enable_epp19(void)
+{
+ unsigned char data;
+
+ printk(KERN_INFO "PC873xx enabling EPP v1.9\n");
+ data = pc873xx_read(base, REG_PCR);
+ pc873xx_write(base, REG_PCR, (data & 0xFC) | 0x02);
+}
+
+void __init pc873xx_enable_ide(void)
+{
+ unsigned char data;
+
+ printk(KERN_INFO "PC873xx enabling IDE interrupt\n");
+ data = pc873xx_read(base, REG_FER);
+ pc873xx_write(base, REG_FER, data | 0x40);
+}
diff --git a/arch/alpha/kernel/pc873xx.h b/arch/alpha/kernel/pc873xx.h
new file mode 100644
index 0000000..25e1695
--- /dev/null
+++ b/arch/alpha/kernel/pc873xx.h
@@ -0,0 +1,35 @@
+
+#ifndef _PC873xx_H_
+#define _PC873xx_H_
+
+/*
+ * Control Register Values
+ */
+#define REG_FER 0x00
+#define REG_FAR 0x01
+#define REG_PTR 0x02
+#define REG_FCR 0x03
+#define REG_PCR 0x04
+#define REG_KRR 0x05
+#define REG_PMC 0x06
+#define REG_TUP 0x07
+#define REG_SID 0x08
+#define REG_ASC 0x09
+#define REG_IRC 0x0e
+
+/*
+ * Model numbers
+ */
+#define PC87303 0
+#define PC87306 1
+#define PC87312 2
+#define PC87332 3
+#define PC87334 4
+
+int pc873xx_probe(void);
+unsigned int pc873xx_get_base(void);
+char *pc873xx_get_model(void);
+void pc873xx_enable_epp19(void);
+void pc873xx_enable_ide(void);
+
+#endif
diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c
index a5fffc8..738fc82 100644
--- a/arch/alpha/kernel/pci-sysfs.c
+++ b/arch/alpha/kernel/pci-sysfs.c
@@ -53,7 +53,6 @@
/**
* pci_mmap_resource - map a PCI resource into user memory space
- * @filp: open sysfs file
* @kobj: kobject for mapping
* @attr: struct bin_attribute for the file being mapped
* @vma: struct vm_area_struct passed into the mmap
@@ -61,7 +60,7 @@
*
* Use the bus mapping routines to map a PCI resource into userspace.
*/
-static int pci_mmap_resource(struct file *filp, struct kobject *kobj,
+static int pci_mmap_resource(struct kobject *kobj,
struct bin_attribute *attr,
struct vm_area_struct *vma, int sparse)
{
diff --git a/arch/alpha/kernel/sys_sio.c b/arch/alpha/kernel/sys_sio.c
index d4327e4..85b4aea 100644
--- a/arch/alpha/kernel/sys_sio.c
+++ b/arch/alpha/kernel/sys_sio.c
@@ -34,6 +34,7 @@
#include "irq_impl.h"
#include "pci_impl.h"
#include "machvec_impl.h"
+#include "pc873xx.h"
#if defined(ALPHA_RESTORE_SRM_SETUP)
/* Save LCA configuration data as the console had it set up. */
@@ -208,7 +209,27 @@
common_init_pci();
sio_pci_route();
sio_fixup_irq_levels(sio_collect_irq_levels());
- ns87312_enable_ide(0x26e);
+
+ if (pc873xx_probe() == -1) {
+ printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
+ } else {
+ printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
+ pc873xx_get_model(), pc873xx_get_base());
+
+ /* Enabling things in the Super IO chip doesn't actually
+ * configure and enable things, the legacy drivers still
+ * need to do the actual configuration and enabling.
+ * This only unblocks them.
+ */
+
+#if !defined(CONFIG_ALPHA_AVANTI)
+ /* Don't bother on the Avanti family.
+ * None of them had on-board IDE.
+ */
+ pc873xx_enable_ide();
+#endif
+ pc873xx_enable_epp19();
+ }
}
static inline void __init
diff --git a/arch/alpha/math-emu/sfp-util.h b/arch/alpha/math-emu/sfp-util.h
index d4c6ae7..f53707f 100644
--- a/arch/alpha/math-emu/sfp-util.h
+++ b/arch/alpha/math-emu/sfp-util.h
@@ -28,3 +28,8 @@
#define UDIV_NEEDS_NORMALIZATION 1
#define abort() goto bad_insn
+
+#ifndef __LITTLE_ENDIAN
+#define __LITTLE_ENDIAN -1
+#endif
+#define __BYTE_ORDER __LITTLE_ENDIAN
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1f254bd..98922f7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -955,7 +955,8 @@
default y
config CPU_HAS_PMU
- depends on CPU_V6 || CPU_V7 || XSCALE_PMU
+ depends on (CPU_V6 || CPU_V7 || XSCALE_PMU) && \
+ (!ARCH_OMAP3 || OMAP3_EMU)
default y
bool
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index a52a27c..6f80665 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -951,8 +951,6 @@
if (!save)
return 0;
- spin_lock_irqsave(&sachip->lock, flags);
-
/*
* Ensure that the SA1111 is still here.
* FIXME: shouldn't do this here.
@@ -969,6 +967,13 @@
* First of all, wake up the chip.
*/
sa1111_wake(sachip);
+
+ /*
+ * Only lock for write ops. Also, sa1111_wake must be called with
+ * released spinlock!
+ */
+ spin_lock_irqsave(&sachip->lock, flags);
+
sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
diff --git a/arch/arm/configs/acs5k_defconfig b/arch/arm/configs/acs5k_defconfig
index 6e32a85..92b0f90 100644
--- a/arch/arm/configs/acs5k_defconfig
+++ b/arch/arm/configs/acs5k_defconfig
@@ -1,1232 +1,86 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-simtec-micrel1
-# Tue Dec 16 13:31:34 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
CONFIG_ARCH_KS8695=y
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Kendin/Micrel KS8695 Implementations
-#
CONFIG_MACH_KS8695=y
CONFIG_MACH_DSM320=y
CONFIG_MACH_ACS5K=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
CONFIG_PCI_DEBUG=y
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
CONFIG_YENTA=y
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCCARD_NONSTATIC=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_ARM_KS8695_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
CONFIG_PRISM54=m
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_KS8695=y
CONFIG_SERIAL_KS8695_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_ACS5KCAN=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_KS8695_WATCHDOG=y
-# CONFIG_ALIM7101_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/acs5k_tiny_defconfig b/arch/arm/configs/acs5k_tiny_defconfig
index b34b1ea..2a27a14 100644
--- a/arch/arm/configs/acs5k_tiny_defconfig
+++ b/arch/arm/configs/acs5k_tiny_defconfig
@@ -1,940 +1,80 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-simtec-micrel1
-# Tue Jan 6 13:23:07 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
CONFIG_ARCH_KS8695=y
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Kendin/Micrel KS8695 Implementations
-#
-# CONFIG_MACH_KS8695 is not set
-# CONFIG_MACH_DSM320 is not set
CONFIG_MACH_ACS5K=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyAM0,115200 init=/bin/sh"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_ARM_KS8695_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_KS8695=y
CONFIG_SERIAL_KS8695_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_ACS5KCAN=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_KS8695_WATCHDOG=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig
index 64fe7f1..2afdf67 100644
--- a/arch/arm/configs/afeb9260_defconfig
+++ b/arch/arm/configs/afeb9260_defconfig
@@ -1,1258 +1,107 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc2
-# Tue Aug 12 22:30:16 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
CONFIG_MACH_AFEB9260=y
-# CONFIG_MACH_USB_A9260 is not set
-# CONFIG_MACH_QIL_A9260 is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
-# CONFIG_ATMEL_TCLIB is not set
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_ATMEL_SSC=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
+CONFIG_EEPROM_AT24=y
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=y
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig
index 30927ca..5536c48 100644
--- a/arch/arm/configs/am200epdkit_defconfig
+++ b/arch/arm/configs/am200epdkit_defconfig
@@ -1,1148 +1,108 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Sun Apr 20 00:29:49 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="gum"
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
CONFIG_ARCH_GUMSTIX=y
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
-CONFIG_MACH_GUMSTIX_F=y
-CONFIG_PXA25x=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-# CONFIG_PCMCIA_IOCTL is not set
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200n8 root=1f01 rootfstype=jffs2"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=m
-CONFIG_IDE_MAX_HWIFS=2
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=m
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-# CONFIG_DEBUG_GPIO is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_SA1100_WATCHDOG=m
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
CONFIG_FB_PXA_PARAMETERS=y
CONFIG_FB_MBX=m
-# CONFIG_FB_METRONOME is not set
CONFIG_FB_VIRTUAL=m
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=m
CONFIG_SND_PXA2XX_AC97=m
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_ETH=m
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
CONFIG_MMC_PXA=y
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-# CONFIG_CRYPTO_SEQIV is not set
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/am3517_evm_defconfig b/arch/arm/configs/am3517_evm_defconfig
index e4f4fb5..ad2bc50 100644
--- a/arch/arm/configs/am3517_evm_defconfig
+++ b/arch/arm/configs/am3517_evm_defconfig
@@ -1,1377 +1,127 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Wed Oct 28 15:47:47 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
# CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
CONFIG_MACH_OMAP3517EVM=y
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_CM_T35 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-CONFIG_VFPv3=y
CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
CONFIG_CAN=y
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
-
-#
-# CAN Device Drivers
-#
CONFIG_CAN_VCAN=y
CONFIG_CAN_DEV=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_TI_HECC=y
-# CONFIG_CAN_SJA1000 is not set
-
-#
-# CAN USB interfaces
-#
-# CONFIG_CAN_EMS_USB is not set
CONFIG_CAN_DEBUG_DEVICES=y
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
CONFIG_TI_DAVINCI_EMAC=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
CONFIG_OMAP2_DSS=y
CONFIG_OMAP2_VRAM_SIZE=4
-CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-# CONFIG_OMAP2_DSS_RFBI is not set
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
CONFIG_PANEL_GENERIC=y
-# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
CONFIG_PANEL_SHARP_LQ043T1DG01=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig
index 6d8a0c8..75de45e 100644
--- a/arch/arm/configs/ams_delta_defconfig
+++ b/arch/arm/configs/ams_delta_defconfig
@@ -1,906 +1,82 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc1-omap1
-# Thu Jun 7 04:28:32 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_TREE_PREEMPT_RCU=y
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MMU_FWK=y
CONFIG_OMAP_MBOX_FWK=m
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_LL_DEBUG_LCD is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_OMAP_DSP=m
-# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
-# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
-# CONFIG_OMAP_DSP_FBEXPORT is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
CONFIG_MACH_AMS_DELTA=y
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_168MHZ is not set
CONFIG_OMAP_ARM_150MHZ=y
-# CONFIG_OMAP_ARM_120MHZ is not set
# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 initrd=0x11c00000,4M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
# CONFIG_SUSPEND is not set
CONFIG_PM_RUNTIME=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_AMS_DELTA=y
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_ESP_CORE is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET_MII=y
CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
-# CONFIG_USB_ALI_M5632 is not set
-# CONFIG_USB_AN2720 is not set
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-CONFIG_SERIO_AMS_DELTA=y
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
# CONFIG_HWMON is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_AMS_DELTA=y
-# CONFIG_LEDS_OMAP_DEBUG is not set
-# CONFIG_LEDS_OMAP is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_CLEAN_4x6 is not set
-# CONFIG_FONT_CLEAN_5x8 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_MIXER_OSS=y
@@ -908,418 +84,38 @@
CONFIG_SND_SOC=y
CONFIG_SND_OMAP_SOC=y
CONFIG_SND_OMAP_SOC_AMS_DELTA=y
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_AMS_DELTA=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_OMAP=y
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ap4evb_defconfig b/arch/arm/configs/ap4evb_defconfig
index e14229b..2eef85e 100644
--- a/arch/arm/configs/ap4evb_defconfig
+++ b/arch/arm/configs/ap4evb_defconfig
@@ -1,779 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc7
-# Mon Feb 8 12:25:36 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
CONFIG_ARCH_SHMOBILE=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# SH-Mobile System Type
-#
-# CONFIG_ARCH_SH7367 is not set
-# CONFIG_ARCH_SH7377 is not set
CONFIG_ARCH_SH7372=y
-
-#
-# SH-Mobile Board Type
-#
CONFIG_MACH_AP4EVB=y
-
-#
-# SH-Mobile System Configuration
-#
-
-#
-# Memory configuration
-#
-CONFIG_MEMORY_START=0x40000000
-CONFIG_MEMORY_SIZE=0x10000000
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_CMT=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=sh-sci.0,115200"
-# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=8
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
# CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig
index daa75bc..558ecd8 100644
--- a/arch/arm/configs/assabet_defconfig
+++ b/arch/arm/configs/assabet_defconfig
@@ -1,904 +1,60 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11
-# Wed Mar 9 13:13:30 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
CONFIG_SA1100_ASSABET=y
-# CONFIG_ASSABET_NEPONSET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttySA0,38400n8 initrd=0xc0800000,3M root=/dev/ram"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_SA1110=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_SA1100_FIR=m
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-# CONFIG_IRCOMM is not set
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
+# CONFIG_SERIO is not set
CONFIG_SERIAL_8250=m
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SA1100=y
CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
CONFIG_FB=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_SA1100=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/at572d940hfek_defconfig b/arch/arm/configs/at572d940hfek_defconfig
index 76d724b..695e32d 100644
--- a/arch/arm/configs/at572d940hfek_defconfig
+++ b/arch/arm/configs/at572d940hfek_defconfig
@@ -1,452 +1,68 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Fri Dec 5 10:58:47 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-AT572D940HF"
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
-# CONFIG_TASK_DELAY_ACCT is not set
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-# CONFIG_CGROUP_NS is not set
-# CONFIG_CGROUP_FREEZER is not set
-# CONFIG_CGROUP_DEVICE is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-# CONFIG_USER_SCHED is not set
-CONFIG_CGROUP_SCHED=y
CONFIG_CGROUP_CPUACCT=y
-# CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
CONFIG_ARCH_AT572D940HF=y
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT572D940HF Board Type
-#
CONFIG_MACH_AT572D940HFEB=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-CONFIG_NUM_SERIAL=3
-
-#
-# AT91 Feature Selections
-#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_RESOURCES_64BIT=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="mem=48M console=ttyS0 initrd=0x21100000,3145728 root=/dev/ram0 rw ip=172.16.1.181"
-# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
-# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
-
-#
-# CAN Device Drivers
-#
CONFIG_CAN_VCAN=m
CONFIG_CAN_DEBUG_DEVICES=y
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=m
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=1
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
@@ -456,162 +72,52 @@
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
CONFIG_MTD_OOPS=m
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x4000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
CONFIG_MTD_PLATRAM=m
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=m
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
CONFIG_MTD_M25P80=m
-CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
-# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
-# CONFIG_MTD_NAND_ATMEL is not set
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_ALAUDA=m
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_MTD_UBI_GLUEBI=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ICS932S401 is not set
CONFIG_ATMEL_SSC=m
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
+CONFIG_SENSORS_TSL2550=m
+CONFIG_DS1682=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
@@ -620,10 +126,6 @@
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
@@ -633,809 +135,198 @@
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=m
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-CONFIG_WLAN_PRE80211=y
-CONFIG_STRIP=m
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_USB_ZD1201=m
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-
-#
-# USB Network Adapters
-#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_DM9601=m
-# CONFIG_USB_NET_SMSC95XX is not set
CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=m
-
-#
-# Userland interfaces
-#
CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_STOWAWAY=m
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_INPUT_MOUSE=y
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_XTKBD=m
CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
-# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_GPIO=m
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_N_HDLC=m
-# CONFIG_RISCOM8 is not set
CONFIG_SPECIALIX=m
-CONFIG_RIO=m
-# CONFIG_RIO_OLDPCI is not set
CONFIG_STALDRV=y
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=m
CONFIG_R3964=m
CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
CONFIG_TCG_TPM=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_DS1682=m
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=m
-CONFIG_SENSORS_PCF8574=m
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_MAX6875=m
-CONFIG_SENSORS_TSL2550=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
CONFIG_SPI_BITBANG=m
-
-#
-# SPI Protocol Masters
-#
-CONFIG_SPI_AT25=m
CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_PCM_OSS_PLUGINS is not set
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-# CONFIG_SND_AT73C213 is not set
-CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GYRATION=m
CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_STORAGE_ALAUDA=y
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-CONFIG_USB_STORAGE_KARMA=y
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
CONFIG_USB_SERIAL_SPCP8X5=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
CONFIG_USB_SERIAL_DEBUG=m
-
-#
-# USB Miscellaneous drivers
-#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=m
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
+CONFIG_MMC_AT91=m
CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=m
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
CONFIG_RTC_DRV_DS1307=m
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
CONFIG_RTC_DRV_DS1305=y
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
-CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-# CONFIG_JFFS2_CMODE_PRIORITY is not set
-# CONFIG_JFFS2_CMODE_SIZE is not set
CONFIG_JFFS2_CMODE_FAVOURLZO=y
-# CONFIG_UBIFS_FS is not set
CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
@@ -1443,198 +334,25 @@
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_SECURITYFS=y
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=m
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_REED_SOLOMON=m
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig
index b1ab50b..ffb1edd 100644
--- a/arch/arm/configs/at91cap9adk_defconfig
+++ b/arch/arm/configs/at91cap9adk_defconfig
@@ -1,1218 +1,115 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Wed Jan 23 22:55:57 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
CONFIG_ARCH_AT91CAP9=y
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91CAP9 Board Type
-#
CONFIG_MACH_AT91CAP9ADK=y
-
-#
-# AT91 Board Options
-#
CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
-CONFIG_LOGO_LINUX_VGA16=y
# CONFIG_LOGO_LINUX_CLUT224 is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_RTC_DRV_AT91SAM9_RTT=0
-CONFIG_RTC_DRV_AT91SAM9_GPBR=0
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 1fffec8..4438e64 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -1,1009 +1,72 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15
-# Mon Jan 9 20:54:30 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-
-#
-# AT91RM9200 Board Type
-#
CONFIG_ARCH_AT91RM9200DK=y
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_ATEB9200 is not set
CONFIG_MACH_ECO920=y
-
-#
-# AT91RM9200 Feature Selections
-#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# MMC/SD Card support
-#
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_WBSD is not set
-CONFIG_MMC_AT91RM9200=y
-
-#
-# File systems
-#
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index c846a79..ccd517c 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -1,997 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15
-# Mon Jan 9 20:57:31 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
CONFIG_MACH_AT91RM9200EK=y
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_ATEB9200 is not set
-
-#
-# AT91RM9200 Feature Selections
-#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_S1D13XXX=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# MMC/SD Card support
-#
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_WBSD is not set
-CONFIG_MMC_AT91RM9200=y
-
-#
-# File systems
-#
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index 472ea11..f8a9226 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -1,1039 +1,83 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan 8 22:20:50 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
CONFIG_MACH_AT91SAM9260EK=y
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT91SAM9=y
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index 4ecde42..b46025b 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -1,1178 +1,95 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan 8 22:21:49 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
CONFIG_ARCH_AT91SAM9261=y
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9261 Board Type
-#
CONFIG_MACH_AT91SAM9261EK=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
CONFIG_DM9000=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D15605 is not set
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
-# CONFIG_FB_INTSRAM is not set
-# CONFIG_FB_ATMEL_STN is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT91SAM9=y
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index 9b792b6..8a04d6f 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -1,1207 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan 8 22:12:20 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
CONFIG_ARCH_AT91SAM9263=y
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9263 Board Type
-#
CONFIG_MACH_AT91SAM9263EK=y
-
-#
-# AT91 Board Options
-#
CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D15605 is not set
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
CONFIG_MMC_AT91=m
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT91SAM9=y
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig
index 64ce106..f1bac70 100644
--- a/arch/arm/configs/at91sam9g20ek_defconfig
+++ b/arch/arm/configs/at91sam9g20ek_defconfig
@@ -1,1167 +1,122 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Jun 10 15:51:52 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
CONFIG_ARCH_AT91SAM9G20=y
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9G20 Board Type
-#
CONFIG_MACH_AT91SAM9G20EK=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_AT91_SLOW_CLOCK is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_ATMEL_PWM=y
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_AT91_AC97 is not set
-
-#
-# SPI devices
-#
CONFIG_SND_AT73C213=y
-CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
+CONFIG_MMC_AT91=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_ATMEL_PWM=y
CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_RTC_DRV_AT91SAM9_RTT=0
-CONFIG_RTC_DRV_AT91SAM9_GPBR=0
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index 90e48bf..75621e4 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -1,946 +1,84 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan 8 22:24:14 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
CONFIG_ARCH_AT91SAM9RL=y
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9RL Board Type
-#
CONFIG_MACH_AT91SAM9RLEK=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=24576
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D15605 is not set
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT91SAM9=y
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
index 6315534..1b0e9a1 100644
--- a/arch/arm/configs/ateb9200_defconfig
+++ b/arch/arm/configs/ateb9200_defconfig
@@ -1,1311 +1,131 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc3
-# Sun May 7 16:53:18 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
CONFIG_MACH_ATEB9200=y
-# CONFIG_MACH_KAFA is not set
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
CONFIG_AT91_CF=m
-
-#
-# Kernel Features
-#
CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
CONFIG_NET_KEY=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLOCK is not set
CONFIG_MTD_BLOCK_RO=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-
-#
-# PHY device support
-#
CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_GL620A=y
+CONFIG_USB_NET_PLUSB=y
+CONFIG_USB_NET_RNDIS_HOST=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
CONFIG_I2C_GPIO=m
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-CONFIG_HID_FF=y
-CONFIG_HID_PID=y
-CONFIG_LOGITECH_FF=y
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-CONFIG_USB_NET_GL620A=y
-CONFIG_USB_NET_NET1080=y
-CONFIG_USB_NET_PLUSB=y
-CONFIG_USB_NET_RNDIS_HOST=y
-CONFIG_USB_NET_CDC_SUBSET=y
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_USB_ZD1201 is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-CONFIG_USB_SERIAL_CP2101=m
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=m
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-
-#
-# MMC/SD Card support
-#
CONFIG_MMC=m
CONFIG_MMC_DEBUG=y
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_AT91RM9200=m
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=m
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRC16=m
-CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index b175b6b..3a1ad15 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -1,1242 +1,122 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-git3
-# Thu Jun 9 19:00:50 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
CONFIG_SA1100_BADGE4=y
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="init=/linuxrc root=/dev/mtdblock3"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_SA1100=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_ARTHUR=m
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARPORT_NOT_PC=y
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=m
-CONFIG_BLK_DEV_IDESCSI=m
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=y
CONFIG_IRCOMM=y
CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
CONFIG_SA1100_FIR=y
-# CONFIG_VIA_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
-# CONFIG_BT_SCO is not set
-# CONFIG_BT_RFCOMM is not set
-# CONFIG_BT_BNEP is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
CONFIG_BT_HCIUART=m
-# CONFIG_BT_HCIUART_H4 is not set
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIVHCI=m
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_SA1100=y
+CONFIG_PARPORT=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=m
+CONFIG_IDE=m
+CONFIG_BLK_DEV_IDECD=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=y
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=m
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_ATMEL is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_PRINTER is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_SA1100_WATCHDOG=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_ELEKTOR=m
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=y
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_BWQCAM is not set
-# CONFIG_VIDEO_CQCAM is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_TVMIXER is not set
-# CONFIG_SOUND_AD1980 is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_AUDIO=y
-
-#
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
-#
-# CONFIG_USB_MIDI is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-
-#
-# USB Multimedia devices
-#
-CONFIG_USB_DABUSB=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_DSBR=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-CONFIG_USB_PWC=m
-
-#
-# USB Network Adapters
-#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
-# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
-
-#
-# USB Host-to-Host Cables
-#
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
-CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_KC2190=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_SA1100=y
+CONFIG_SERIAL_SA1100_CONSOLE=y
+CONFIG_I2C=m
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_ELEKTOR=m
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_SA1100_WATCHDOG=m
+CONFIG_SOUND=y
+CONFIG_SOUND_PRIME=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
CONFIG_USB_USS720=m
-
-#
-# USB Serial Converter support
-#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
CONFIG_USB_RIO500=m
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_MINIX_FS=m
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig
index 6ac6693..75984cd 100644
--- a/arch/arm/configs/bcmring_defconfig
+++ b/arch/arm/configs/bcmring_defconfig
@@ -1,800 +1,79 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc2
-# Mon Mar 29 12:01:41 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
-CONFIG_SHMEM=y
# CONFIG_AIO is not set
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
CONFIG_ARCH_BCMRING=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_FPGA11107 is not set
-CONFIG_ARCH_BCM11107=y
-
-#
-# BCMRING Options
-#
CONFIG_BCM_ZRELADDR=0x8000
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_HW_PERF_EVENTS=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
CONFIG_UACCESS_WITH_MEMCPY=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0e000000
CONFIG_ZBOOT_ROM_BSS=0x0ea00000
CONFIG_ZBOOT_ROM=y
-CONFIG_CMDLINE=""
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_BCM_UMI=y
CONFIG_MTD_NAND_BCM_UMI_HWCS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=64
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_FILE_LOCKING is not set
-# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
# CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
# CONFIG_JFFS2_FS_SECURITY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
CONFIG_HEADERS_CHECK=y
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_BUILD_DOCSRC is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig
index eef33de..cedc92e 100644
--- a/arch/arm/configs/cam60_defconfig
+++ b/arch/arm/configs/cam60_defconfig
@@ -1,554 +1,74 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Mar 6 10:07:26 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
CONFIG_MACH_CAM60=y
-# CONFIG_MACH_SAM9_L9260 is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0x20004000
-# CONFIG_ZBOOT_ROM is not set
CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
CONFIG_CFG80211=m
-CONFIG_NL80211=y
-CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
-CONFIG_MAC80211_RCSIMPLE=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_RAM=m
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_PLATRAM=m
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
-# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
@@ -557,671 +77,98 @@
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
-# CONFIG_ICPLUS_PHY is not set
-CONFIG_FIXED_PHY=m
-# CONFIG_FIXED_MII_10_FDX is not set
-# CONFIG_FIXED_MII_100_FDX is not set
-# CONFIG_FIXED_MII_1000_FDX is not set
-CONFIG_FIXED_MII_AMNT=1
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_STOWAWAY=m
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_XTKBD=m
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_VSXXXAA=m
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_RTC_DRV_AT91SAM9_RTT=0
-CONFIG_RTC_DRV_AT91SAM9_GPBR=0
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
+CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ABLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-# CONFIG_CRYPTO_XTS is not set
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=m
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=m
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig
index b6a7063..ac64dbd 100644
--- a/arch/arm/configs/carmeva_defconfig
+++ b/arch/arm/configs/carmeva_defconfig
@@ -1,723 +1,47 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc4
-# Tue Jun 14 12:05:24 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+# CONFIG_HOTPLUG is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
CONFIG_MACH_CARMEVA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_DISCONTIGMEM is not set
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_ARM_AT91_ETHER=y
-CONFIG_ARM_AT91_ETHER_RMII=y
-# CONFIG_SMC91X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_AT91RM9200_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
CONFIG_MMC=m
CONFIG_MMC_DEBUG=y
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_AT91RM9200=m
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=y
-CONFIG_JFFS_FS_VERBOSE=0
-CONFIG_JFFS_PROC_FS=y
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_NAND=y
-# CONFIG_JFFS2_FS_NOR_ECC is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+CONFIG_NFSD=y
diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig
index d662cab..dce912d 100644
--- a/arch/arm/configs/cerfcube_defconfig
+++ b/arch/arm/configs/cerfcube_defconfig
@@ -1,902 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 14:19:40 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
CONFIG_SA1100_CERF=y
-# CONFIG_SA1100_CERF_FLASH_8MB is not set
CONFIG_SA1100_CERF_FLASH_16MB=y
-# CONFIG_SA1100_CERF_FLASH_32MB is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
CONFIG_PCMCIA_SA1100=m
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttySA0,38400 root=/dev/mtdblock3 rootfstype=jffs2 rw mem=32M init=/linuxrc"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=m
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_SA1110=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_SA1100=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_IDE=y
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SA1100=y
CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_SA1100_WATCHDOG=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_ROMFS_FS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/cm_t35_defconfig b/arch/arm/configs/cm_t35_defconfig
index 032b49ba..8bb0633 100644
--- a/arch/arm/configs/cm_t35_defconfig
+++ b/arch/arm/configs/cm_t35_defconfig
@@ -1,1732 +1,157 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Tue Oct 13 17:10:40 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
CONFIG_MACH_CM_T35=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-CONFIG_VFPv3=y
CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
-# CONFIG_LIB80211_DEBUG is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_OMAP_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_TWL4030=m
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
-# CONFIG_TWL4030_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
CONFIG_USB_MUSB_OTG=y
CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
+CONFIG_USB_ETH=m
CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig
index 47d22d0..dcfbcf3 100644
--- a/arch/arm/configs/cm_x2xx_defconfig
+++ b/arch/arm/configs/cm_x2xx_defconfig
@@ -1,1369 +1,132 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Sun Feb 1 16:31:36 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
+# CONFIG_COMPAT_BRK is not set
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
CONFIG_MACH_ARMCORE=y
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCI_HOST_ITE8152=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
CONFIG_YENTA=m
# CONFIG_YENTA_O2 is not set
# CONFIG_YENTA_RICOH is not set
-CONFIG_YENTA_TI=y
# CONFIG_YENTA_ENE_TUNE is not set
# CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
CONFIG_PCMCIA_PXA2XX=m
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=1f03 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=m
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
-# CONFIG_BT_RFCOMM_TTY is not set
CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
CONFIG_MTD_NAND_GPIO=m
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_CAFE is not set
CONFIG_MTD_NAND_CM_X270=y
-# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_PMP is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
CONFIG_DM9000=y
CONFIG_DM9000_DEBUGLEVEL=1
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-# CONFIG_LIBERTAS_CS is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_UCB1400=m
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_PXA2XX=m
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
CONFIG_UCB1400_CORE=m
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-CONFIG_MEDIA_TUNER_CUSTOMIZE=y
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_DMA_SG=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-CONFIG_SOC_CAMERA=m
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-CONFIG_SOC_CAMERA_MT9M111=m
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
-CONFIG_VIDEO_PXA27x=m
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
CONFIG_FB_PXA_PARAMETERS=y
CONFIG_FB_MBX=m
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_PCI is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
CONFIG_SND_PXA2XX_AC97=m
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_PCMCIA is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
@@ -1373,589 +136,54 @@
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_UWB is not set
CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_SDRICOH_CS is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=m
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_PXA is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=0
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index a334069..921e56a 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -1,446 +1,44 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Tue Oct 13 19:03:13 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-cm-x300"
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-# CONFIG_CPU_PXA320 is not set
-# CONFIG_CPU_PXA930 is not set
-# CONFIG_CPU_PXA935 is not set
-# CONFIG_CPU_PXA950 is not set
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
CONFIG_MACH_CM_X300=y
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_PXA_EZX is not set
-# CONFIG_MACH_XCEP is not set
-CONFIG_PXA3xx=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_XSC3L2=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HIGHMEM=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@@ -450,1304 +48,141 @@
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
CONFIG_BT_HCIBTUSB=m
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
-# CONFIG_LIB80211_DEBUG is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
CONFIG_MTD_NAND_PXA3xx=y
-# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
CONFIG_DM9000=y
CONFIG_DM9000_DEBUGLEVEL=0
CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_DA9034 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_WM97XX=m
# CONFIG_TOUCHSCREEN_WM9705 is not set
-CONFIG_TOUCHSCREEN_WM9712=y
# CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
-# CONFIG_SPI_PXA2XX is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
CONFIG_PMIC_DA903X=y
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_DA903X=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_TDO24M=y
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_DA903X=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
-# CONFIG_SND_PXA2XX_AC97 is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_AC97=m
CONFIG_SND_PXA2XX_SOC_EM_X270=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_WM9712=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
-# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=m
CONFIG_HID_ZEROPLUS=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DA903X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
CONFIG_RTC_DRV_PXA=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig
index d5c0881..313627a 100644
--- a/arch/arm/configs/cns3420vb_defconfig
+++ b/arch/arm/configs/cns3420vb_defconfig
@@ -1,831 +1,72 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc6
-# Sun May 2 21:58:08 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_OPROFILE_ARMV6=y
-CONFIG_OPROFILE_ARM11_CORE=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-# CONFIG_CGROUP_NS is not set
-# CONFIG_CGROUP_FREEZER is not set
-# CONFIG_CGROUP_DEVICE is not set
-# CONFIG_CPUSETS is not set
-# CONFIG_CGROUP_CPUACCT is not set
-# CONFIG_RESOURCE_COUNTERS is not set
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_SLOW_WORK_DEBUG is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=m
-# CONFIG_CFQ_GROUP_IOSCHED is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
CONFIG_ARCH_CNS3XXX=y
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# CNS3XXX platform type
-#
CONFIG_MACH_CNS3420VB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_ARM_GIC=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=20000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_SATA_PMP is not set
# CONFIG_ATA_SFF is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
CONFIG_FSCACHE=y
-# CONFIG_FSCACHE_STATS is not set
-# CONFIG_FSCACHE_HISTOGRAM is not set
-# CONFIG_FSCACHE_DEBUG is not set
-# CONFIG_FSCACHE_OBJECT_LIST is not set
-# CONFIG_CACHEFILES is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LKDTM is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
index c962870..f52c64e 100644
--- a/arch/arm/configs/colibri_pxa270_defconfig
+++ b/arch/arm/configs/colibri_pxa270_defconfig
@@ -1,443 +1,49 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 16:18:17 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
CONFIG_MACH_COLIBRI=y
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_RAUMFELD_PROTO is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_PXA_FICP is not set
-# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@@ -447,1290 +53,128 @@
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
CONFIG_CFG80211=y
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-CONFIG_LIB80211_CRYPT_WEP=y
-CONFIG_LIB80211_CRYPT_CCMP=y
-CONFIG_LIB80211_CRYPT_TKIP=y
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
CONFIG_MTD_CFI_LE_BYTE_SWAP=y
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PXA is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SA1100_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
# CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-# CONFIG_HID_APPLE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
CONFIG_RTC_DRV_PCF8583=m
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
-# CONFIG_RTC_DRV_PXA is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig
index 11fdb5a..b985334 100644
--- a/arch/arm/configs/colibri_pxa300_defconfig
+++ b/arch/arm/configs/colibri_pxa300_defconfig
@@ -1,1155 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 16:13:20 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-# CONFIG_CPU_PXA310 is not set
-# CONFIG_CPU_PXA320 is not set
-# CONFIG_CPU_PXA930 is not set
-# CONFIG_CPU_PXA935 is not set
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
CONFIG_MACH_COLIBRI300=y
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_RAUMFELD_PROTO is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA3xx=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_XSC3L2=y
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="console=ttyS0,115200 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_PACKET is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_AX88796=y
-# CONFIG_AX88796_93CX6 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 26e458d..310f9a6 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -1,959 +1,94 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc1
-# Fri Apr 14 19:09:52 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
-CONFIG_SHMEM=y
-# CONFIG_SLAB is not set
-CONFIG_DOUBLEFAULT=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
CONFIG_SLOB=y
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
CONFIG_SA1100_COLLIE=y
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-CONFIG_SHARP_LOCOMO=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
-CONFIG_PCMCIA_DEBUG=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NODES_SHIFT=2
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
+CONFIG_PCMCIA_DEBUG=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_APM=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
# CONFIG_MTD_CFI_I1 is not set
# CONFIG_MTD_CFI_I2 is not set
CONFIG_MTD_CFI_I4=y
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_SHARP=y
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_SA1100=y
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETDEVICES is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_LOCOMO=y
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_CS=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_SHARE_IRQ is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SA1100=y
CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_MCP=y
CONFIG_MCP_SA11X0=y
CONFIG_MCP_UCB1200=y
CONFIG_MCP_UCB1200_TS=y
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_LOCOMO=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_FIRMWARE_EDID is not set
CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_SA1100=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_LOCOMO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
+CONFIG_ROMFS_FS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHEDSTATS is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index 5e4069f..4a1fa81 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -1,542 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Mon Oct 20 10:12:23 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
CONFIG_PXA_SHARPSL=y
CONFIG_MACH_POODLE=y
CONFIG_MACH_CORGI=y
CONFIG_MACH_SHEPHERD=y
CONFIG_MACH_HUSKY=y
-# CONFIG_MACH_AKITA is not set
-# CONFIG_MACH_SPITZ is not set
-# CONFIG_MACH_BORZOI is not set
-# CONFIG_MACH_TOSA is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-CONFIG_PXA_SHARP_C7xx=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-# CONFIG_TOSA_BT is not set
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-CONFIG_SHARP_LOCOMO=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARPSL_PM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_AH is not set
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_TARGET_LOG is not set
CONFIG_IP6_NF_FILTER=m
-# CONFIG_IP6_NF_TARGET_REJECT is not set
CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
CONFIG_PXA_FICP=m
-# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@@ -546,18 +77,9 @@
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
@@ -566,848 +88,107 @@
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_SHARPSL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_LOCOMO is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_CORGI=y
-CONFIG_KEYBOARD_SPITZ=y
-CONFIG_KEYBOARD_TOSA=y
-# CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES is not set
-# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_CORGI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-CONFIG_SENSORS_MAX1111=y
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-CONFIG_USB_DSBR=m
-# CONFIG_USB_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_MBX is not set
CONFIG_FB_W100=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_CORGI=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-CONFIG_BACKLIGHT_LOCOMO=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-# CONFIG_SND is not set
CONFIG_SOUND_PRIME=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GYRATION=m
CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_MON=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
@@ -1415,479 +196,79 @@
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
-# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGET is not set
CONFIG_USB_IDMOUSE=m
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_PXA25X=y
-CONFIG_USB_PXA25X=y
-# CONFIG_USB_PXA25X_SMALL is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig
index c9137aa..bbf729e 100644
--- a/arch/arm/configs/cpu9260_defconfig
+++ b/arch/arm/configs/cpu9260_defconfig
@@ -1,1337 +1,116 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Tue Jul 14 14:57:55 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
-# CONFIG_MACH_AFEB9260 is not set
-# CONFIG_MACH_USB_A9260 is not set
-# CONFIG_MACH_QIL_A9260 is not set
CONFIG_MACH_CPU9260=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_ETH=m
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_MMC_AT91=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig
index d234479..e7d7942 100644
--- a/arch/arm/configs/cpu9g20_defconfig
+++ b/arch/arm/configs/cpu9g20_defconfig
@@ -1,1327 +1,116 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Tue Jul 14 15:03:43 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
CONFIG_ARCH_AT91SAM9G20=y
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9G20 Board Type
-#
-# CONFIG_MACH_AT91SAM9G20EK is not set
CONFIG_MACH_CPU9G20=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_ETH=m
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_MMC_AT91=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig
index 1f8dda6..022aeb5 100644
--- a/arch/arm/configs/cpuat91_defconfig
+++ b/arch/arm/configs/cpuat91_defconfig
@@ -1,1315 +1,112 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Tue Jul 14 14:45:01 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-# CONFIG_MACH_ECBAT91 is not set
-# CONFIG_MACH_YL9200 is not set
CONFIG_MACH_CPUAT91=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_ETH=m
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_MMC_AT91=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91RM9200 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index f095040..a24c448 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -1,863 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan 9 22:19:24 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
CONFIG_MACH_CSB337=y
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-# CONFIG_MACH_CHUB is not set
-# CONFIG_MACH_HOMEMATIC is not set
-# CONFIG_MACH_ECBAT91 is not set
-# CONFIG_MACH_SWEDATMS is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=128
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_AT91_DATAFLASH is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_ATMEL_SSC=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
@@ -871,345 +83,22 @@
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=y
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_AT91 is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
# CONFIG_RTC_INTF_SYSFS is not set
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT91RM9200=y
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index 5071540..98552ad 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -1,937 +1,71 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Fri Apr 4 22:06:15 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
CONFIG_MACH_CSB637=y
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=128
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
@@ -945,276 +79,20 @@
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=y
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig
index e14c99c..ba66705 100644
--- a/arch/arm/configs/da8xx_omapl_defconfig
+++ b/arch/arm/configs/da8xx_omapl_defconfig
@@ -1,1331 +1,126 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Oct 22 12:19:19 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
CONFIG_ARCH_DAVINCI=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_CP_INTC=y
-
-#
-# TI DaVinci Implementations
-#
-
-#
-# DaVinci Core Type
-#
-# CONFIG_ARCH_DAVINCI_DM644x is not set
-# CONFIG_ARCH_DAVINCI_DM355 is not set
-# CONFIG_ARCH_DAVINCI_DM646x is not set
CONFIG_ARCH_DAVINCI_DA830=y
CONFIG_ARCH_DAVINCI_DA850=y
-CONFIG_ARCH_DAVINCI_DA8XX=y
-# CONFIG_ARCH_DAVINCI_DM365 is not set
-
-#
-# DaVinci Board Type
-#
-CONFIG_MACH_DAVINCI_DA830_EVM=y
-CONFIG_DA830_UI=y
-CONFIG_DA830_UI_LCD=y
-# CONFIG_DA830_UI_NAND is not set
-CONFIG_MACH_DAVINCI_DA850_EVM=y
-CONFIG_DA850_UI_EXP=y
-CONFIG_DA850_UI_NONE=y
-# CONFIG_DA850_UI_RMII is not set
-CONFIG_DAVINCI_MUX=y
-# CONFIG_DAVINCI_MUX_DEBUG is not set
-# CONFIG_DAVINCI_MUX_WARNINGS is not set
CONFIG_DAVINCI_RESET_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_LEDS=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=1
CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
CONFIG_LXT_PHY=y
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
CONFIG_LSI_ET1011C_PHY=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
CONFIG_TI_DAVINCI_EMAC=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_XTKBD=m
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
# CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_DAVINCI=y
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCF857X=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_DAVINCI_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
CONFIG_REGULATOR_TPS6507X=y
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_DAVINCI is not set
-# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_DA8XX=y
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
CONFIG_SND_SOC=m
CONFIG_SND_DAVINCI_SOC=m
-# CONFIG_SND_DA830_SOC_EVM is not set
-# CONFIG_SND_DA850_SOC_EVM is not set
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 625035f..2519cc5 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,1835 +1,194 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Mon Oct 12 14:13:12 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
CONFIG_ARCH_DAVINCI=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_AINTC=y
-CONFIG_ARCH_DAVINCI_DMx=y
-
-#
-# TI DaVinci Implementations
-#
-
-#
-# DaVinci Core Type
-#
CONFIG_ARCH_DAVINCI_DM644x=y
CONFIG_ARCH_DAVINCI_DM355=y
CONFIG_ARCH_DAVINCI_DM646x=y
-# CONFIG_ARCH_DAVINCI_DA830 is not set
-# CONFIG_ARCH_DAVINCI_DA850 is not set
CONFIG_ARCH_DAVINCI_DM365=y
-
-#
-# DaVinci Board Type
-#
-CONFIG_MACH_DAVINCI_EVM=y
CONFIG_MACH_SFFSDR=y
CONFIG_MACH_NEUROS_OSD2=y
-CONFIG_MACH_DAVINCI_DM355_EVM=y
CONFIG_MACH_DM355_LEOPARD=y
-CONFIG_MACH_DAVINCI_DM6467_EVM=y
-CONFIG_MACH_DAVINCI_DM365_EVM=y
-CONFIG_DAVINCI_MUX=y
CONFIG_DAVINCI_MUX_DEBUG=y
CONFIG_DAVINCI_MUX_WARNINGS=y
CONFIG_DAVINCI_RESET_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_LEDS=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_NAND_DAVINCI=m
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=1
CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=m
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=m
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
CONFIG_BLK_DEV_PALMCHIP_BK3710=m
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
CONFIG_LXT_PHY=y
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
CONFIG_LSI_ET1011C_PHY=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
CONFIG_TI_DAVINCI_EMAC=y
CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_XTKBD=m
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
CONFIG_INPUT_DM355EVM=m
-CONFIG_INPUT_DM365EVM=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
# CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_DAVINCI=y
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCF857X=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_DAVINCI_WATCHDOG=m
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
CONFIG_MFD_DM355EVM_MSP=y
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_DAVINCI=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_SOC=m
CONFIG_SND_DAVINCI_SOC=m
-CONFIG_SND_DAVINCI_SOC_I2S=m
-CONFIG_SND_DAVINCI_SOC_MCASP=m
CONFIG_SND_DAVINCI_SOC_EVM=m
CONFIG_SND_DM6467_SOC_EVM=m
-# CONFIG_SND_DAVINCI_SOC_SFFSDR is not set
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_SPDIF=m
-CONFIG_SND_SOC_TLV320AIC3X=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
CONFIG_HID=m
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
-# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=m
-# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=m
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
-# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=m
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_SOC=y
-
-#
-# DaVinci 35x and 644x USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
CONFIG_USB_MUSB_PERIPHERAL=y
-# CONFIG_USB_MUSB_OTG is not set
CONFIG_USB_GADGET_MUSB_HDRC=y
CONFIG_MUSB_PIO_ONLY=y
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-CONFIG_NOP_USB_XCEIV=m
CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
# CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_DAVINCI=m
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_DM355EVM is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
# CONFIG_ARM_UNWIND is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/devkit8000_defconfig b/arch/arm/configs/devkit8000_defconfig
index c7a6820..786cbe4 100644
--- a/arch/arm/configs/devkit8000_defconfig
+++ b/arch/arm/configs/devkit8000_defconfig
@@ -1,1914 +1,184 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc2
-# Wed Mar 24 13:27:25 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
-# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
-CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
CONFIG_ARCH_OMAP3430=y
-CONFIG_OMAP_PACKAGE_CUS=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
CONFIG_MACH_DEVKIT8000=y
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_IGEP0020 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
-# CONFIG_OMAP3_EMU is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS2,115200n8 root=/dev/nfs nfsroot=192.168.1.1:home/nfsroot/current,home/nfsroot/current ip=dhcp rw noinitrd root delay=3"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-CONFIG_VFPv3=y
CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
-# CONFIG_IRLAN is not set
-# CONFIG_IRCOMM is not set
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_MCS_FIR is not set
CONFIG_BT=y
-# CONFIG_BT_L2CAP is not set
-# CONFIG_BT_SCO is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=40960
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_TI_DAVINCI_EMAC is not set
CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
CONFIG_KEYBOARD_MATRIX=y
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
CONFIG_TWL4030_CORE=y
CONFIG_TWL4030_POWER=y
-CONFIG_TWL4030_CODEC=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_BOTH_ENDIAN=y
-# CONFIG_FB_BIG_ENDIAN is not set
-# CONFIG_FB_LITTLE_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_OMAP_BOOTLOADER_INIT=y
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=0
-CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
-# CONFIG_OMAP2_DSS_RFBI is not set
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
CONFIG_PANEL_GENERIC=y
-# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
-# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
-# CONFIG_PANEL_TOPPOLY_TDO35S is not set
-# CONFIG_PANEL_TPO_TD043MTEA1 is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_SOC=y
CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
CONFIG_USB_MUSB_OTG=y
CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=m
-# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
index b7b2ab0..9359e1b 100644
--- a/arch/arm/configs/dove_defconfig
+++ b/arch/arm/configs/dove_defconfig
@@ -1,1619 +1,137 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Tue Nov 24 13:53:37 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
CONFIG_ARCH_DOVE=y
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Marvell Dove Implementations
-#
CONFIG_MACH_DOVE_DB=y
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
CONFIG_CPU_V6=y
CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_TAUROS2=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_411920 is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=1
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_ORION=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_MV=y
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
CONFIG_MV_XOR=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_UBIFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_BLOWFISH=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-
-#
-# Compression
-#
CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_MV_CESA is not set
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ebsa110_defconfig b/arch/arm/configs/ebsa110_defconfig
index d5e8279..c319418 100644
--- a/arch/arm/configs/ebsa110_defconfig
+++ b/arch/arm/configs/ebsa110_defconfig
@@ -1,747 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 18:29:48 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
CONFIG_ARCH_EBSA110=y
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA110=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-
-#
-# PC-card bridges
-#
CONFIG_I82365=m
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs rw mem=16M console=ttyS1,38400n8"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_PC_PCMCIA is not set
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_IRC=y
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_LIMIT=y
-CONFIG_IP_NF_MATCH_IPRANGE=y
-CONFIG_IP_NF_MATCH_MAC=y
-CONFIG_IP_NF_MATCH_PKTTYPE=y
-CONFIG_IP_NF_MATCH_MARK=y
-CONFIG_IP_NF_MATCH_MULTIPORT=y
-CONFIG_IP_NF_MATCH_TOS=y
-CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
-CONFIG_IP_NF_MATCH_DSCP=y
-CONFIG_IP_NF_MATCH_AH_ESP=y
-CONFIG_IP_NF_MATCH_LENGTH=y
CONFIG_IP_NF_MATCH_TTL=y
-CONFIG_IP_NF_MATCH_TCPMSS=y
-CONFIG_IP_NF_MATCH_HELPER=y
-CONFIG_IP_NF_MATCH_STATE=y
-CONFIG_IP_NF_MATCH_CONNTRACK=y
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
-# CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-CONFIG_IP_NF_TARGET_NETMAP=y
-CONFIG_IP_NF_TARGET_SAME=y
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
-CONFIG_IP_NF_TARGET_DSCP=y
-CONFIG_IP_NF_TARGET_MARK=y
-CONFIG_IP_NF_TARGET_CLASSIFY=y
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_MATCH_LIMIT=y
-CONFIG_IP6_NF_MATCH_MAC=y
-CONFIG_IP6_NF_MATCH_RT=y
-CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_FRAG=y
+CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_HL=y
-CONFIG_IP6_NF_MATCH_MULTIPORT=y
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-CONFIG_IP6_NF_MATCH_MARK=y
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-CONFIG_IP6_NF_MATCH_AHESP=y
-CONFIG_IP6_NF_MATCH_LENGTH=y
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
+CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_FILTER=y
-# CONFIG_IP6_NF_TARGET_LOG is not set
CONFIG_IP6_NF_MANGLE=y
-CONFIG_IP6_NF_TARGET_MARK=y
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_FW_LOADER=m
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=y
+CONFIG_PARPORT_PC_FIFO=y
+CONFIG_PARPORT_1284=y
+CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_ARM_AM79C961A=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
CONFIG_SOFT_WATCHDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_MINIX_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig
index 25dd53b..6bb6abd 100644
--- a/arch/arm/configs/ecbat91_defconfig
+++ b/arch/arm/configs/ecbat91_defconfig
@@ -1,1313 +1,99 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Sat Jun 9 01:30:18 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-# CONFIG_MACH_CHUB is not set
CONFIG_MACH_ECBAT91=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# AT91 Feature Selections
-#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
CONFIG_CFG80211=y
-CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=y
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-CONFIG_IEEE80211_SOFTMAC=y
-CONFIG_IEEE80211_SOFTMAC_DEBUG=y
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_AT91RM9200_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_AT91_SPI is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_GPIO=y
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_ATMEL is not set
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_AT91=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT91RM9200=y
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
+CONFIG_CRYPTO_SHA1=y
diff --git a/arch/arm/configs/edb7211_defconfig b/arch/arm/configs/edb7211_defconfig
index e3a6cd3..7b62be1 100644
--- a/arch/arm/configs/edb7211_defconfig
+++ b/arch/arm/configs/edb7211_defconfig
@@ -1,573 +1,27 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 21:48:12 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_HOTPLUG is not set
CONFIG_ARCH_CLPS711X=y
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# CLPS711X/EP721X Implementations
-#
-# CONFIG_ARCH_AUTCPU12 is not set
-# CONFIG_ARCH_CDB89712 is not set
-# CONFIG_ARCH_CEIVA is not set
-# CONFIG_ARCH_CLEP7312 is not set
CONFIG_ARCH_EDB7211=y
-# CONFIG_ARCH_P720T is not set
-# CONFIG_ARCH_FORTUNET is not set
-CONFIG_ARCH_EP7211=y
-# CONFIG_EP72XX_ROM_BOOT is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_CLPS711X=y
CONFIG_SERIAL_CLPS711X_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig
index 2bee932..d7db34f 100644
--- a/arch/arm/configs/em_x270_defconfig
+++ b/arch/arm/configs/em_x270_defconfig
@@ -1,1140 +1,132 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Sun Feb 1 16:43:31 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
+# CONFIG_COMPAT_BRK is not set
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
CONFIG_MACH_EM_X270=y
CONFIG_MACH_EXEDA=y
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=1f03 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=m
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
-# CONFIG_BT_RFCOMM_TTY is not set
CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
CONFIG_BT_HCIBTUSB=m
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
CONFIG_DM9000=y
CONFIG_DM9000_DEBUGLEVEL=1
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
CONFIG_INPUT_APMPOWER=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_PXA27x=y
CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_PXA27x=y
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_DA9034 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_WM97XX=m
# CONFIG_TOUCHSCREEN_WM9705 is not set
-CONFIG_TOUCHSCREEN_WM9712=y
# CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_APM_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_BATTERY_DA9030=y
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
CONFIG_PMIC_DA903X=y
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-CONFIG_MEDIA_TUNER_CUSTOMIZE=y
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_DMA_SG=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-CONFIG_SOC_CAMERA=m
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-CONFIG_SOC_CAMERA_MT9M111=m
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
-CONFIG_VIDEO_PXA27x=m
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DA903X=y
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
CONFIG_FB_PXA_PARAMETERS=y
CONFIG_FB_MBX=m
-# CONFIG_FB_MBX_DEBUG is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_TDO24M=y
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_DA903X=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
-# CONFIG_SND_PXA2XX_AC97 is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_AC97=m
CONFIG_SND_PXA2XX_SOC_EM_X270=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_WM9712=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
@@ -1144,597 +136,59 @@
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_PCA955X is not set
CONFIG_LEDS_DA903X=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_PXA is not set
-# CONFIG_DMADEVICES is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_DA903X=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=0
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 35d735e..6d6689c 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -1,1464 +1,124 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Tue May 19 12:26:49 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
CONFIG_ARCH_EP93XX=y
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Cirrus EP93xx Implementation Options
-#
CONFIG_CRUNCH=y
-
-#
-# EP93xx Platforms
-#
-# CONFIG_EP93XX_SDCE0_PHYS_OFFSET is not set
-CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET=y
CONFIG_MACH_ADSSPHERE=y
-CONFIG_MACH_EDB93XX=y
CONFIG_MACH_EDB9301=y
CONFIG_MACH_EDB9302=y
CONFIG_MACH_EDB9307=y
CONFIG_MACH_EDB9312=y
CONFIG_MACH_EDB9315=y
CONFIG_MACH_GESBC9312=y
-CONFIG_MACH_MICRO9=y
CONFIG_MACH_MICRO9H=y
-CONFIG_MACH_MICRO9M=y
CONFIG_MACH_MICRO9L=y
CONFIG_MACH_TS72XX=y
-CONFIG_EP93XX_EARLY_UART1=y
-# CONFIG_EP93XX_EARLY_UART2 is not set
-# CONFIG_EP93XX_EARLY_UART3 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_ARM_VIC=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_TS7250 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_EP93XX_ETH=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
CONFIG_USB_RTL8150=y
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_AMBA_PL010=y
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
-CONFIG_I2C_DEBUG_CHIP=y
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_EP93XX_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_EP93XX=y
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SLAB_LEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
index 74baf57..1691dea 100644
--- a/arch/arm/configs/eseries_pxa_defconfig
+++ b/arch/arm/configs/eseries_pxa_defconfig
@@ -1,1246 +1,118 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc8
-# Wed Dec 24 23:35:45 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
CONFIG_ARCH_PXA_ESERIES=y
-CONFIG_MACH_E330=y
-CONFIG_MACH_E350=y
-CONFIG_MACH_E740=y
-CONFIG_MACH_E750=y
-CONFIG_MACH_E400=y
-CONFIG_MACH_E800=y
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-# CONFIG_PXA_PWM is not set
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
CONFIG_PCMCIA_PXA2XX=m
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# FIR device drivers
-#
CONFIG_PXA_FICP=y
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
CONFIG_CFG80211=m
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
CONFIG_MTD_NAND_TMIO=m
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
CONFIG_HERMES=m
CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_RT2X00 is not set
CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_GPIO=m
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
-# CONFIG_SERIAL_PXA_CONSOLE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-CONFIG_MFD_TMIO=y
CONFIG_MFD_T7L66XB=y
CONFIG_MFD_TC6387XB=y
CONFIG_MFD_TC6393XB=y
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
CONFIG_FB_W100=y
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
-# CONFIG_SND_PXA2XX_AC97 is not set
# CONFIG_SND_PCMCIA is not set
CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_AC97=m
CONFIG_SND_PXA2XX_SOC_E800=m
-CONFIG_SND_SOC_WM9712=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_TMIO=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
index 9e9057c..c4eeb6d 100644
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -1,451 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Mon Nov 2 13:18:50 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-ezx200910312315"
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_CSB726 is not set
CONFIG_PXA_EZX=y
-CONFIG_MACH_EZX_A780=y
-CONFIG_MACH_EZX_E680=y
-CONFIG_MACH_EZX_A1200=y
-CONFIG_MACH_EZX_A910=y
-CONFIG_MACH_EZX_E6=y
-CONFIG_MACH_EZX_E2=y
-# CONFIG_MACH_XCEP is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
-# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
@@ -458,22 +77,12 @@
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -484,21 +93,15 @@
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -506,15 +109,7 @@
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -526,21 +121,10 @@
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
@@ -549,10 +133,6 @@
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
@@ -570,38 +150,7 @@
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
@@ -611,192 +160,42 @@
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
@@ -804,289 +203,38 @@
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_TOUCHSCREEN_PCAP=y
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
CONFIG_INPUT_PCAP=y
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=8
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_APM_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
CONFIG_EZX_PCAP=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
CONFIG_REGULATOR_PCAP=y
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_CUSTOMISE=y
# CONFIG_MEDIA_TUNER_SIMPLE is not set
# CONFIG_MEDIA_TUNER_TDA8290 is not set
@@ -1105,650 +253,96 @@
# CONFIG_MEDIA_TUNER_MXL5005S is not set
# CONFIG_MEDIA_TUNER_MXL5007T is not set
# CONFIG_MEDIA_TUNER_MC44S803 is not set
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_SG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# RDS decoders
-#
-# CONFIG_VIDEO_SAA6588 is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_SAA7191 is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_VPX3220 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
CONFIG_SOC_CAMERA=y
-# CONFIG_SOC_CAMERA_MT9M001 is not set
CONFIG_SOC_CAMERA_MT9M111=y
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
CONFIG_VIDEO_PXA27x=y
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
# CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_I2C_SI4713 is not set
-# CONFIG_RADIO_SI4713 is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_RADIO_SI470X is not set
-# CONFIG_USB_MR800 is not set
CONFIG_RADIO_TEA5764=y
-CONFIG_RADIO_TEA5764_XTAL=y
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
CONFIG_FB_PXA_OVERLAY=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_ARM is not set
-CONFIG_SND_PXA2XX_LIB=y
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_PXA2XX_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
# CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
CONFIG_HID_APPLE=m
-# CONFIG_HID_WACOM is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_SPI=y
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
-# CONFIG_RTC_DRV_PXA is not set
CONFIG_RTC_DRV_PCAP=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
@@ -1787,214 +381,40 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
-CONFIG_LOCKDEP=y
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=m
CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig
index 04d9793..4f925ea 100644
--- a/arch/arm/configs/footbridge_defconfig
+++ b/arch/arm/configs/footbridge_defconfig
@@ -1,234 +1,61 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:02:24 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+# CONFIG_HOTPLUG is not set
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
CONFIG_ARCH_FOOTBRIDGE=y
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Footbridge Implementations
-#
CONFIG_ARCH_CATS=y
CONFIG_ARCH_PERSONAL_SERVER=y
-# CONFIG_ARCH_EBSA285_ADDIN is not set
CONFIG_ARCH_EBSA285_HOST=y
CONFIG_ARCH_NETWINDER=y
-CONFIG_FOOTBRIDGE=y
-CONFIG_FOOTBRIDGE_HOST=y
-CONFIG_ARCH_EBSA285=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA110=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_IPV6 is not set
+CONFIG_ATM=y
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRDA_DEBUG=y
+CONFIG_WINBOND_FIR=m
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
CONFIG_ISAPNP=y
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE=m
-CONFIG_PARIDE_PARPORT=y
-
-#
-# Parallel IDE high-level drivers
-#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
-# CONFIG_PARIDE_BPCK6 is not set
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
-# CONFIG_PARIDE_EPATC8 is not set
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
@@ -236,1019 +63,65 @@
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPNP is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-CONFIG_ATM=y
-# CONFIG_ATM_CLIP is not set
-# CONFIG_ATM_LANE is not set
-# CONFIG_ATM_BR2684 is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_NSC_FIR is not set
-CONFIG_WINBOND_FIR=m
-# CONFIG_TOSHIBA_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-# CONFIG_VLSI_FIR is not set
-# CONFIG_VIA_FIR is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_NET_SB1000 is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
-# CONFIG_EL1 is not set
-# CONFIG_EL2 is not set
-# CONFIG_ELPLUS is not set
-# CONFIG_EL16 is not set
-# CONFIG_EL3 is not set
-# CONFIG_3C515 is not set
CONFIG_VORTEX=y
-# CONFIG_TYPHOON is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# ATM drivers
-#
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
-# CONFIG_PPPOATM is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_ESPSERIAL is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_21285=y
CONFIG_SERIAL_21285_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=y
-CONFIG_21285_WATCHDOG=m
-CONFIG_977_WATCHDOG=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
CONFIG_DS1620=y
CONFIG_NWBUTTON=y
CONFIG_NWBUTTON_REBOOT=y
CONFIG_NWFLASH=m
-CONFIG_NVRAM=m
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
CONFIG_I2C=m
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_BWQCAM is not set
-# CONFIG_VIDEO_CQCAM is not set
-# CONFIG_VIDEO_W9966 is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_DPC is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=y
+CONFIG_21285_WATCHDOG=m
+CONFIG_977_WATCHDOG=m
CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=y
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_HID is not set
CONFIG_USB=m
CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_AUDIO=m
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
-# CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_PWC is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=m
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-# CONFIG_USB_ATM is not set
-# CONFIG_USB_SPEEDTOUCH is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
+CONFIG_USB_PRINTER=m
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
+CONFIG_NFSD=m
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
-# CONFIG_ACORN_PARTITION_CUMANA is not set
-# CONFIG_ACORN_PARTITION_EESOX is not set
-# CONFIG_ACORN_PARTITION_ICS is not set
CONFIG_ACORN_PARTITION_ADFS=y
-# CONFIG_ACORN_PARTITION_POWERTEC is not set
-# CONFIG_ACORN_PARTITION_RISCIX is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/configs/fortunet_defconfig b/arch/arm/configs/fortunet_defconfig
index d58142b..e11c7ea 100644
--- a/arch/arm/configs/fortunet_defconfig
+++ b/arch/arm/configs/fortunet_defconfig
@@ -1,556 +1,28 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:51:10 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_HOTPLUG is not set
CONFIG_ARCH_CLPS711X=y
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# CLPS711X/EP721X Implementations
-#
-# CONFIG_ARCH_AUTCPU12 is not set
-# CONFIG_ARCH_CDB89712 is not set
-# CONFIG_ARCH_CEIVA is not set
-# CONFIG_ARCH_CLEP7312 is not set
-# CONFIG_ARCH_EDB7211 is not set
-# CONFIG_ARCH_P720T is not set
CONFIG_ARCH_FORTUNET=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_NETDEVICES is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_CLPS711X=y
CONFIG_SERIAL_CLPS711X_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=y
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/arm/configs/g3evm_defconfig b/arch/arm/configs/g3evm_defconfig
index 3c19031..4a336ab 100644
--- a/arch/arm/configs/g3evm_defconfig
+++ b/arch/arm/configs/g3evm_defconfig
@@ -1,774 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc7
-# Mon Feb 8 12:20:01 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
CONFIG_ARCH_SHMOBILE=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# SH-Mobile System Type
-#
CONFIG_ARCH_SH7367=y
-# CONFIG_ARCH_SH7377 is not set
-# CONFIG_ARCH_SH7372 is not set
-
-#
-# SH-Mobile Board Type
-#
CONFIG_MACH_G3EVM=y
-
-#
-# SH-Mobile System Configuration
-#
-
-#
-# Memory configuration
-#
-CONFIG_MEMORY_START=0x50000000
-CONFIG_MEMORY_SIZE=0x08000000
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_CMT=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200"
-# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=8
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
# CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/g4evm_defconfig b/arch/arm/configs/g4evm_defconfig
index 8ee79a5..21c6d03 100644
--- a/arch/arm/configs/g4evm_defconfig
+++ b/arch/arm/configs/g4evm_defconfig
@@ -1,779 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc7
-# Mon Feb 8 12:21:35 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
CONFIG_ARCH_SHMOBILE=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# SH-Mobile System Type
-#
-# CONFIG_ARCH_SH7367 is not set
CONFIG_ARCH_SH7377=y
-# CONFIG_ARCH_SH7372 is not set
-
-#
-# SH-Mobile Board Type
-#
CONFIG_MACH_G4EVM=y
-
-#
-# SH-Mobile System Configuration
-#
-
-#
-# Memory configuration
-#
-CONFIG_MEMORY_START=0x40000000
-CONFIG_MEMORY_SIZE=0x08000000
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_CMT=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttySC4,115200 earlyprintk=sh-sci.4,115200"
-# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=8
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
# CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index a8ad8fb..317960f 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -1,1163 +1,79 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sat Oct 24 00:09:30 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
CONFIG_SA1100_H3600=y
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_SA1100=y
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# FIR device drivers
-#
CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_SA1100=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SA1100=y
CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-CONFIG_HTC_EGPIO=y
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia Capabilities Port drivers
-#
-# CONFIG_MCP_SA11X0 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
CONFIG_FB_SA1100=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=m
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=m
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/h5000_defconfig b/arch/arm/configs/h5000_defconfig
index 5bb7372..ac336f1 100644
--- a/arch/arm/configs/h5000_defconfig
+++ b/arch/arm/configs/h5000_defconfig
@@ -1,995 +1,82 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Tue Sep 16 16:13:48 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
CONFIG_MACH_H5000=y
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PXA2XX is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA25X=y
-CONFIG_USB_PXA25X=y
-CONFIG_USB_PXA25X_SMALL=y
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SA1100=y
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/h7201_defconfig b/arch/arm/configs/h7201_defconfig
index 09a6c6a..bee94d2 100644
--- a/arch/arm/configs/h7201_defconfig
+++ b/arch/arm/configs/h7201_defconfig
@@ -1,565 +1,27 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:11:33 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
CONFIG_ARCH_H720X=y
-
-#
-# h720x Implementations
-#
CONFIG_ARCH_H7201=y
-# CONFIG_ARCH_H7202 is not set
-CONFIG_CPU_H7201=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_H720X is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-# CONFIG_NET is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig
index fedc52b..69405a7 100644
--- a/arch/arm/configs/h7202_defconfig
+++ b/arch/arm/configs/h7202_defconfig
@@ -1,729 +1,48 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:15:45 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
CONFIG_ARCH_H720X=y
-
-#
-# h720x Implementations
-#
-# CONFIG_ARCH_H7201 is not set
CONFIG_ARCH_H7202=y
-CONFIG_CPU_H7202=y
-# CONFIG_H7202_SERIAL23 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,19200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
CONFIG_MTD_H720X=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_SMC91X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_SA1100 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_FILE_STORAGE_TEST=y
CONFIG_USB_G_SERIAL=m
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig
index 2da1acf..bed8047 100644
--- a/arch/arm/configs/hackkit_defconfig
+++ b/arch/arm/configs/hackkit_defconfig
@@ -1,766 +1,49 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-git3
-# Thu Jun 9 20:58:58 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
CONFIG_SA1100_HACKKIT=y
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttySA0,115200 root=/dev/ram0 initrd=0xc0400000,8M init=/rootshell"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_SA1100=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_IPV6 is not set
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=3
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_ATMEL is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SA1100=y
CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/htcherald_defconfig b/arch/arm/configs/htcherald_defconfig
index e0ef0d1..edfa1c0 100644
--- a/arch/arm/configs/htcherald_defconfig
+++ b/arch/arm/configs/htcherald_defconfig
@@ -1,1144 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc8
-# Sat Dec 5 12:16:24 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
CONFIG_ARCH_OMAP850=y
# CONFIG_ARCH_OMAP15XX is not set
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_HTCWIZARD is not set
CONFIG_MACH_HERALD=y
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
CONFIG_OMAP_ARM_195MHZ=y
-# CONFIG_OMAP_ARM_182MHZ is not set
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
CONFIG_CPU_ARM925T=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=m
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_OMAP=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_PCOMP=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/igep0020_defconfig b/arch/arm/configs/igep0020_defconfig
index e7940a9..fcda057 100644
--- a/arch/arm/configs/igep0020_defconfig
+++ b/arch/arm/configs/igep0020_defconfig
@@ -1,460 +1,47 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Thu Jan 7 16:14:55 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
CONFIG_OMAP_RESET_CLOCKS=y
# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
CONFIG_ARCH_OMAP3430=y
-CONFIG_OMAP_PACKAGE_CBB=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
CONFIG_MACH_IGEP0020=y
-# CONFIG_MACH_OMAP_3630SDP is not set
-# CONFIG_OMAP3_EMU is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_VFP=y
-CONFIG_VFPv3=y
CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@@ -464,1183 +51,129 @@
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=y
-# CONFIG_MAC80211_RC_PID is not set
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IWM is not set
CONFIG_LIBERTAS=y
-# CONFIG_LIBERTAS_USB is not set
CONFIG_LIBERTAS_SDIO=y
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
CONFIG_SSB=m
-CONFIG_SSB_SDIOHOST_POSSIBLE=y
-# CONFIG_SSB_SDIOHOST is not set
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSB_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-CONFIG_TWL4030_CODEC=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
CONFIG_OMAP2_DSS=y
CONFIG_OMAP2_VRAM_SIZE=14
# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
-# CONFIG_OMAP2_DSS_RFBI is not set
# CONFIG_OMAP2_DSS_VENC is not set
-# CONFIG_OMAP2_DSS_SDI is not set
CONFIG_OMAP2_DSS_DSI=y
CONFIG_OMAP2_DSS_USE_DSI_PLL=y
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
CONFIG_FB_OMAP2=y
# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
CONFIG_PANEL_GENERIC=y
-# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
-# CONFIG_PANEL_TAAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_SOC=y
CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
CONFIG_SND_OMAP_SOC_IGEP0020=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SOUND_PRIME is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_HID=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_TWL4030_USB is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig
index 21f2bff..ade55c8 100644
--- a/arch/arm/configs/imote2_defconfig
+++ b/arch/arm/configs/imote2_defconfig
@@ -1,491 +1,62 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc2
-# Thu Apr 8 14:49:08 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_SLOW_WORK_DEBUG is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Intel/Marvell Dev Platforms (sorted by hardware release time)
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_ZYLONITE300 is not set
-# CONFIG_MACH_ZYLONITE320 is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-
-#
-# Third Party Dev Platforms (sorted by vendor name)
-#
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_MACH_ARCOM_ZEUS is not set
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_CAPC7117 is not set
-# CONFIG_ARCH_GUMSTIX is not set
CONFIG_MACH_INTELMOTE2=y
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_MACH_XCEP is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-
-#
-# End-user Products (sorted by vendor name)
-#
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_PXA_EZX is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_RAUMFELD_RC is not set
-# CONFIG_MACH_RAUMFELD_CONNECTOR is not set
-# CONFIG_MACH_RAUMFELD_SPEAKER is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_ICONTROL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_CPU_HAS_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M"
-# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
@@ -498,23 +69,12 @@
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -525,21 +85,15 @@
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -547,15 +101,7 @@
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -567,21 +113,10 @@
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
@@ -590,10 +125,6 @@
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
@@ -611,215 +142,40 @@
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
CONFIG_BRIDGE=m
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
CONFIG_IEEE802154=y
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_AR7_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-CONFIG_IEEE802154_DRIVERS=y
-# CONFIG_IEEE802154_FAKEHARD is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
@@ -827,302 +183,36 @@
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-CONFIG_TOUCHSCREEN_DA9034=y
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=8
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_PXA2XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_APM_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_DA9030 is not set
-# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
CONFIG_PMIC_DA903X=y
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_DA903X=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-CONFIG_IR_CORE=y
-CONFIG_VIDEO_IR=y
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_CUSTOMISE=y
# CONFIG_MEDIA_TUNER_SIMPLE is not set
# CONFIG_MEDIA_TUNER_TDA8290 is not set
@@ -1141,645 +231,89 @@
# CONFIG_MEDIA_TUNER_MXL5005S is not set
# CONFIG_MEDIA_TUNER_MXL5007T is not set
# CONFIG_MEDIA_TUNER_MC44S803 is not set
-CONFIG_MEDIA_TUNER_MAX2165=m
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_SG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_VIDEO_IR_I2C=y
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# RDS decoders
-#
-# CONFIG_VIDEO_SAA6588 is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_SAA7191 is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_TVP7002 is not set
-# CONFIG_VIDEO_VPX3220 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
CONFIG_SOC_CAMERA=y
-# CONFIG_SOC_CAMERA_MT9M001 is not set
CONFIG_SOC_CAMERA_MT9M111=y
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9T112 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_RJ54N1 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
-# CONFIG_SOC_CAMERA_OV9640 is not set
CONFIG_VIDEO_PXA27x=y
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
# CONFIG_V4L_USB_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
CONFIG_FB_PXA_OVERLAY=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-# CONFIG_BACKLIGHT_DA903X is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_ARM is not set
-CONFIG_SND_PXA2XX_LIB=y
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_PXA2XX_SOC=y
-# CONFIG_SND_PXA2XX_SOC_IMOTE2 is not set
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
# CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_SPI=y
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DA903X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
CONFIG_RTC_DRV_PXA=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
@@ -1818,222 +352,41 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
-# CONFIG_PROVE_RCU is not set
-CONFIG_LOCKDEP=y
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=m
CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig
index 6b0d043..7196ade 100644
--- a/arch/arm/configs/integrator_defconfig
+++ b/arch/arm/configs/integrator_defconfig
@@ -1,862 +1,71 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 21:14:51 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
CONFIG_ARCH_INTEGRATOR=y
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Integrator Options
-#
CONFIG_ARCH_INTEGRATOR_AP=y
-# CONFIG_ARCH_INTEGRATOR_CP is not set
-# CONFIG_INTEGRATOR_IMPD1 is not set
-
-#
-# Processor Type
-#
CONFIG_CPU_ARM720T=y
CONFIG_CPU_ARM920T=y
-# CONFIG_CPU_ARM922T is not set
-# CONFIG_CPU_ARM926T is not set
-# CONFIG_CPU_ARM1020 is not set
-# CONFIG_CPU_ARM1022 is not set
-# CONFIG_CPU_ARM1026 is not set
-# CONFIG_CPU_V6 is not set
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-CONFIG_ICST525=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp mem=32M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_INTEGRATOR=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_AFS_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_AMBA_PL010=y
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
-# CONFIG_FB_MATROX_G is not set
-CONFIG_FB_MATROX_MULTIHEAD=y
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig
index 3c040cc..4fa94a1 100644
--- a/arch/arm/configs/iop13xx_defconfig
+++ b/arch/arm/configs/iop13xx_defconfig
@@ -1,1159 +1,124 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Wed Dec 12 16:11:03 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
CONFIG_ARCH_IOP13XX=y
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# IOP13XX Implementation Options
-#
-
-#
-# IOP13XX Platform Support
-#
CONFIG_MACH_IQ81340SC=y
CONFIG_MACH_IQ81340MC=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-CONFIG_PLAT_IOP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="ip=bootp root=nfs console=ttyS0,115200 nfsroot=,tcp,v3,wsize=8192,rsize=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xfa000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
-# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_E1000E is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
CONFIG_INTEL_IOP_ADMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=y
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=y
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index 62a8549..4f2ec3a 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -1,1389 +1,135 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Wed Dec 12 15:49:08 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
CONFIG_ARCH_IOP32X=y
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# IOP32x Implementation Options
-#
-
-#
-# IOP32x Platform Types
-#
-CONFIG_MACH_EP80219=y
CONFIG_MACH_GLANTANK=y
CONFIG_ARCH_IQ80321=y
CONFIG_ARCH_IQ31244=y
CONFIG_MACH_N2100=y
-CONFIG_IOP3XX_ATU=y
-# CONFIG_MACH_EM7210 is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-CONFIG_PLAT_IOP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
CONFIG_SATA_VITESSE=y
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
-# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_E1000E is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
+CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
CONFIG_INTEL_IOP_ADMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
CONFIG_NET_DMA=y
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=y
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=y
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index 0bc23ec..aa36128 100644
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -1,1391 +1,91 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Tue Aug 18 13:41:41 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_CLASSIC_RCU is not set
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
CONFIG_ARCH_IOP33X=y
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# IOP33x Implementation Options
-#
-
-#
-# IOP33x Platform Types
-#
CONFIG_ARCH_IQ80331=y
CONFIG_MACH_IQ80332=y
-CONFIG_PLAT_IOP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc iop3xx_init_atu=y"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=y
-CONFIG_MD_RAID6_PQ=y
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
CONFIG_E1000=y
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
CONFIG_INTEL_IOP_ADMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
CONFIG_NET_DMA=y
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig
index 8b5b576..9083246 100644
--- a/arch/arm/configs/ixp2000_defconfig
+++ b/arch/arm/configs/ixp2000_defconfig
@@ -1,1113 +1,99 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:39 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
CONFIG_ARCH_IXP2000=y
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP2400/2800 Implementation Options
-#
-
-#
-# IXP2400/2800 Platforms
-#
CONFIG_ARCH_ENP2611=y
CONFIG_ARCH_IXDP2400=y
CONFIG_ARCH_IXDP2800=y
-CONFIG_ARCH_IXDP2X00=y
CONFIG_ARCH_IXDP2401=y
CONFIG_ARCH_IXDP2801=y
-CONFIG_MACH_IXDP28X5=y
-CONFIG_ARCH_IXDP2X01=y
# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
+CONFIG_EEPROM_LEGACY=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
CONFIG_CS89x0=y
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
CONFIG_ENP2611_MSF_NET=y
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
CONFIG_WAN=y
-# CONFIG_LANMEDIA is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
-# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
-
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_FARSYNC is not set
-# CONFIG_DSCC4 is not set
CONFIG_DLCI=y
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP2000_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_IXP2000=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
+CONFIG_WATCHDOG=y
+CONFIG_IXP2000_WATCHDOG=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig
index 59c11c9..7fc056a 100644
--- a/arch/arm/configs/ixp23xx_defconfig
+++ b/arch/arm/configs/ixp23xx_defconfig
@@ -1,1408 +1,105 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:45 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
CONFIG_ARCH_IXP23XX=y
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP23xx Implementation Options
-#
-
-#
-# IXP23xx Platforms
-#
CONFIG_MACH_ESPRESSO=y
CONFIG_MACH_IXDP2351=y
CONFIG_MACH_ROADRUNNER=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_IWMMXT is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_EEPROM_LEGACY=y
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=y
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
CONFIG_WAN=y
-# CONFIG_LANMEDIA is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
-# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
-
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_FARSYNC is not set
-# CONFIG_DSCC4 is not set
CONFIG_DLCI=y
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
+CONFIG_WATCHDOG=y
# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
+CONFIG_USB=y
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_STORAGE=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index a907ad5..5c50239 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -1,155 +1,13 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Sun Jan 27 07:33:38 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
CONFIG_MACH_NSLU2=y
CONFIG_MACH_AVILA=y
CONFIG_MACH_LOFT=y
@@ -160,190 +18,43 @@
CONFIG_MACH_IXDPG425=y
CONFIG_MACH_IXDP465=y
CONFIG_MACH_KIXRP435=y
-CONFIG_ARCH_IXCDP1100=y
CONFIG_ARCH_PRPMC1100=y
CONFIG_MACH_NAS100D=y
CONFIG_MACH_DSMG600=y
-CONFIG_ARCH_IXDP4XX=y
CONFIG_MACH_FSG=y
-CONFIG_CPU_IXP46X=y
-CONFIG_CPU_IXP43X=y
CONFIG_MACH_GTWX5715=y
-
-#
-# IXP4xx Options
-#
-CONFIG_DMABOUNCE=y
-# CONFIG_IXP4XX_INDIRECT_PCI is not set
CONFIG_IXP4XX_QMGR=y
CONFIG_IXP4XX_NPE=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp root=/dev/nfs"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
CONFIG_IP_VS=m
CONFIG_IP_VS_DEBUG=y
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-# CONFIG_IP_VS_PROTO_TCP is not set
-# CONFIG_IP_VS_PROTO_UDP is not set
-# CONFIG_IP_VS_PROTO_ESP is not set
-# CONFIG_IP_VS_PROTO_AH is not set
-
-#
-# IPVS scheduler
-#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
@@ -352,102 +63,24 @@
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
-# CONFIG_IP_VS_SED is not set
-# CONFIG_IP_VS_NQ is not set
-
-#
-# IPVS application helper
-#
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-CONFIG_IP_NF_MATCH_TOS=m
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
-# CONFIG_IP_NF_ARP_MANGLE is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
-# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
@@ -460,1132 +93,113 @@
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_RR is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
-# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_SIMP is not set
-CONFIG_NET_CLS_POLICE=y
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
+CONFIG_EEPROM_LEGACY=y
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
CONFIG_BLK_DEV_HPT366=y
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=y
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
CONFIG_PATA_ARTOP=y
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
CONFIG_PATA_IXP4XX_CF=y
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_IFB is not set
CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_IXP4XX_ETH=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
CONFIG_WAN=y
-# CONFIG_LANMEDIA is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
-# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_PC300TOO is not set
-# CONFIG_FARSYNC is not set
-# CONFIG_DSCC4 is not set
-# CONFIG_IXP4XX_HSS is not set
CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=m
-# CONFIG_CYCLADES_SYNC is not set
-# CONFIG_LAPBETHER is not set
-# CONFIG_X25_ASY is not set
-CONFIG_ATM_DRIVERS=y
-# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_IXP4XX_BEEPER=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_IXP4XX=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IOP3XX is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=y
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-# CONFIG_USB_ATM is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_GPIO=y
CONFIG_LEDS_FSG=y
-
-#
-# LED Triggers
-#
+CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index d1f1646..ea80e7e 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -1,960 +1,71 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Fri Aug 21 15:41:39 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
CONFIG_SA1100_JORNADA720=y
CONFIG_SA1100_JORNADA720_SSP=y
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-CONFIG_SA1100_SSP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
CONFIG_PCMCIA_SA1100=y
-# CONFIG_PCMCIA_SA1111 is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# FIR device drivers
-#
CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DNET is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_HERMES is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
CONFIG_KEYBOARD_HP7XX=y
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_HP7XX=y
-# CONFIG_TOUCHSCREEN_HTCPEN is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_SA1111 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SA1100=y
CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia Capabilities Port drivers
-#
-# CONFIG_MCP_SA11X0 is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_SA1100 is not set
CONFIG_FB_S1D13XXX=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_LCD_HP700=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_HP700=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SA1100=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
@@ -993,182 +104,9 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index f661e76..896dbe0 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -1,883 +1,61 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc3
-# Sun May 7 16:54:53 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_ATEB9200 is not set
CONFIG_MACH_KAFA=y
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_LEDS=y
-# CONFIG_LEDS_TIMER is not set
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLOCK is not set
CONFIG_MTD_BLOCK_RO=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index 668ba59..9f906a8 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -1,1304 +1,127 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc8
-# Wed Jun 3 13:52:33 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
CONFIG_MACH_KB9200=y
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-# CONFIG_MACH_ECBAT91 is not set
-# CONFIG_MACH_YL9200 is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=128
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-CONFIG_HZ=128
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x10000000
CONFIG_ZBOOT_ROM_BSS=0x20040000
-# CONFIG_ZBOOT_ROM is not set
CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
CONFIG_ATMEL_SSC=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_UBIFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 4611d3c..f2e3a90 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,230 +1,13 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Thu Feb 4 23:08:54 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=19
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
CONFIG_ARCH_KIRKWOOD=y
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# Marvell Kirkwood Implementations
-#
CONFIG_MACH_DB88F6281_BP=y
CONFIG_MACH_RD88F6192_NAS=y
CONFIG_MACH_RD88F6281=y
@@ -232,1645 +15,162 @@
CONFIG_MACH_SHEEVAPLUG=y
CONFIG_MACH_TS219=y
CONFIG_MACH_TS41X=y
-CONFIG_MACH_OPENRD=y
CONFIG_MACH_OPENRD_BASE=y
CONFIG_MACH_OPENRD_CLIENT=y
CONFIG_MACH_NETSPACE_V2=y
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_FEROCEON=y
# CONFIG_CPU_FEROCEON_OLD_ID is not set
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_FEROCEON_L2=y
-# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_UACCESS_WITH_MEMCPY=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
CONFIG_NET_DSA=y
-# CONFIG_NET_DSA_TAG_DSA is not set
-CONFIG_NET_DSA_TAG_EDSA=y
-# CONFIG_NET_DSA_TAG_TRAILER is not set
-CONFIG_NET_DSA_MV88E6XXX=y
-# CONFIG_NET_DSA_MV88E6060 is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
CONFIG_NET_DSA_MV88E6123_61_65=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
CONFIG_NET_PKTGEN=m
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=y
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_MWL8K is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWM is not set
CONFIG_LIBERTAS=y
-# CONFIG_LIBERTAS_USB is not set
CONFIG_LIBERTAS_SDIO=y
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_HERMES is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_ORION=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
-# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_MVSDIO=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_S35390A=y
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_MV=y
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
CONFIG_MV_XOR=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_MV_CESA=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ks8695_defconfig b/arch/arm/configs/ks8695_defconfig
index e6f2276..47c4883 100644
--- a/arch/arm/configs/ks8695_defconfig
+++ b/arch/arm/configs/ks8695_defconfig
@@ -1,1021 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-simtec-micrel1
-# Fri Dec 5 10:30:27 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
CONFIG_ARCH_KS8695=y
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Kendin/Micrel KS8695 Implementations
-#
CONFIG_MACH_KS8695=y
CONFIG_MACH_DSM320=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
CONFIG_PCI_DEBUG=y
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
CONFIG_YENTA=y
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCCARD_NONSTATIC=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
CONFIG_PRISM54=m
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_KS8695=y
CONFIG_SERIAL_KS8695_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig
index af75951..faa2865 100644
--- a/arch/arm/configs/lart_defconfig
+++ b/arch/arm/configs/lart_defconfig
@@ -1,875 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:53:24 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
CONFIG_SA1100_LART=y
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
CONFIG_LEDS=y
-# CONFIG_LEDS_TIMER is not set
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttySA0,9600 root=/dev/ram"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_SA1100=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-CONFIG_APM=m
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=1
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_LART=y
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=m
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=1
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_LART=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_IDE=m
+CONFIG_BLK_DEV_IDECD=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
-# CONFIG_SLIP_SMART is not set
-# CONFIG_SLIP_MODE_SLIP6 is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SA1100=y
CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=1
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
CONFIG_CRC32=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/configs/loki_defconfig b/arch/arm/configs/loki_defconfig
index 6df7b14..e1eaff7 100644
--- a/arch/arm/configs/loki_defconfig
+++ b/arch/arm/configs/loki_defconfig
@@ -1,1146 +1,120 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Fri Jun 13 03:07:49 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
CONFIG_ARCH_LOKI=y
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Marvell Loki (88RC8480) Implementations
-#
CONFIG_MACH_LB88RC8480=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_FEROCEON=y
# CONFIG_CPU_FEROCEON_OLD_ID is not set
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_FTL=y
CONFIG_NFTL=y
-# CONFIG_NFTL_RW is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
CONFIG_SATA_MV=y
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
CONFIG_MV643XX_ETH=y
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_I2C_MV64XXX=y
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=y
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SAMPLES is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig
index aeb7686..1c8c9ee 100644
--- a/arch/arm/configs/lpd270_defconfig
+++ b/arch/arm/configs/lpd270_defconfig
@@ -1,1031 +1,65 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:51 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
CONFIG_MACH_LOGICPD_PXA270=y
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA27x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=y
CONFIG_SND_PXA2XX_AC97=y
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/lpd7a400_defconfig b/arch/arm/configs/lpd7a400_defconfig
index 6116fee..20caaab 100644
--- a/arch/arm/configs/lpd7a400_defconfig
+++ b/arch/arm/configs/lpd7a400_defconfig
@@ -1,877 +1,68 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12
-# Thu Nov 3 14:15:32 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_HOTPLUG is not set
# CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7952X is not set
+# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_ARCH_LH7A40X=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# LH7A40X Implementations
-#
-# CONFIG_MACH_KEV7A400 is not set
CONFIG_MACH_LPD7A400=y
-# CONFIG_MACH_LPD7A404 is not set
-CONFIG_ARCH_LH7A400=y
-CONFIG_LPD7A40X_CPLD_SSP=y
-# CONFIG_LH7A40X_CONTIGMEM is not set
-# CONFIG_LH7A40X_ONE_BANK_PER_NODE is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
CONFIG_PREEMPT=y
-CONFIG_DISCONTIGMEM=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x04000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_POLL=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_IDE_ARM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_IDE=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_SMC91X=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-CONFIG_TOUCHSCREEN_ADS7843_LH7=y
-CONFIG_HAS_TOUCHSCREEN_ADS7843_LH7=y
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_LH7A40X=y
CONFIG_SERIAL_LH7A40X_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_ARMCLCD=y
-CONFIG_FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT=y
-# CONFIG_FB_ARMCLCD_SHARP_LQ057Q3DC02 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ64D343 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ10D368 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ121S1DG41 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=y
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_LH7A40X_AC97=y
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/lpd7a404_defconfig b/arch/arm/configs/lpd7a404_defconfig
index 142cccd..1efcce9 100644
--- a/arch/arm/configs/lpd7a404_defconfig
+++ b/arch/arm/configs/lpd7a404_defconfig
@@ -1,1127 +1,81 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16
-# Thu Mar 23 17:50:31 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_LOG_BUF_SHIFT=16
CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7952X is not set
CONFIG_ARCH_LH7A40X=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-
-#
-# LH7A40X Implementations
-#
-# CONFIG_MACH_KEV7A400 is not set
-# CONFIG_MACH_LPD7A400 is not set
CONFIG_MACH_LPD7A404=y
-CONFIG_ARCH_LH7A404=y
-# CONFIG_LH7A40X_CONTIGMEM is not set
-# CONFIG_LH7A40X_ONE_BANK_PER_NODE is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
CONFIG_PREEMPT=y
-# CONFIG_AEABI is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x04000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_POLL=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_IDE_ARM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-CONFIG_TOUCHSCREEN_ADC_LH7=y
-CONFIG_HAS_TOUCHSCREEN_ADC_LH7=y
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_LH7A40X=y
CONFIG_SERIAL_LH7A40X_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_ARMCLCD=y
-CONFIG_FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT=y
-# CONFIG_FB_ARMCLCD_SHARP_LQ057Q3DC02 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ64D343 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ10D368 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ121S1DG41 is not set
-# CONFIG_FB_ARMCLCD_AUO_A070VW01_WIDE is not set
-# CONFIG_FB_ARMCLCD_HITACHI is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_ARMAACI is not set
-CONFIG_SND_LH7A40X_AC97=y
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_LH7=y
-CONFIG_USB_LH7=y
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
CONFIG_USB_ZERO=y
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/lubbock_defconfig b/arch/arm/configs/lubbock_defconfig
index 75c6293..c4ba274 100644
--- a/arch/arm/configs/lubbock_defconfig
+++ b/arch/arm/configs/lubbock_defconfig
@@ -1,800 +1,56 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:18:13 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Intel PXA2xx Implementations
-#
CONFIG_ARCH_LUBBOCK=y
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-CONFIG_PXA25x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_TCIC is not set
CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_LUBBOCK=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_SHARP_SL is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_SMC91X=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_SA1111=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-CONFIG_USB_PXA2XX_SMALL=y
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_SA1100 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-CONFIG_USB_G_SERIAL=y
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
+CONFIG_USB_G_SERIAL=m
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/lusl7200_defconfig b/arch/arm/configs/lusl7200_defconfig
index c1a1fb0..816fc42 100644
--- a/arch/arm/configs/lusl7200_defconfig
+++ b/arch/arm/configs/lusl7200_defconfig
@@ -1,453 +1,23 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:24:38 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_FIQ=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+# CONFIG_HOTPLUG is not set
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
CONFIG_ARCH_L7200=y
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x00010000
CONFIG_ZBOOT_ROM_BSS=0xf03e0000
CONFIG_ZBOOT_ROM=y
CONFIG_CMDLINE="console=tty0 console=ttyLU1,115200 root=/dev/ram initrd=0xf1000000,0x005dac7b mem=32M"
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-# CONFIG_NET is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
# CONFIG_VT is not set
CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index 8e9a723..af805e8 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -1,432 +1,52 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Jan 30 12:42:03 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
CONFIG_MACH_H4700=y
CONFIG_MACH_MAGICIAN=y
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_PWM=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
-# CONFIG_IRNET is not set
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
CONFIG_PXA_FICP=m
-# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@@ -436,1101 +56,127 @@
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
CONFIG_BT_HCIBTUSB=m
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PXA2XX is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_PXA27x is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
-# CONFIG_SERIAL_PXA_CONSOLE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_DS1WM=y
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-CONFIG_W1_SLAVE_DS2760=y
-# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
CONFIG_BATTERY_DS2760=y
-# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
CONFIG_MFD_ASIC3=y
CONFIG_HTC_EGPIO=y
CONFIG_HTC_PASIC3=y
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_BQ24022=y
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
CONFIG_FB_PXA_OVERLAY=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
CONFIG_FB_W100=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
# CONFIG_SND_ARM is not set
-CONFIG_SND_PXA2XX_LIB=m
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=m
CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_HID=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=m
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_PXA is not set
-# CONFIG_DMADEVICES is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-CONFIG_REGULATOR_BQ24022=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig
index 1cddb61..04efa1b 100644
--- a/arch/arm/configs/mainstone_defconfig
+++ b/arch/arm/configs/mainstone_defconfig
@@ -1,794 +1,55 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sat Mar 26 20:00:45 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
CONFIG_MACH_MAINSTONE=y
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-CONFIG_PXA27x=y
-CONFIG_IWMMXT=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_SHARP_SL is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_SMC91X=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index ff44bd1..2472a95 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -1,383 +1,38 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Wed May 20 12:29:51 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-CONFIG_PLAT_S3C24XX=y
-CONFIG_S3C2410_CLOCK=y
-CONFIG_CPU_S3C244X=y
-CONFIG_S3C24XX_PWM=y
-CONFIG_S3C24XX_GPIO_EXTRA=0
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
CONFIG_S3C_ADC=y
-CONFIG_PLAT_S3C=y
-CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y
-CONFIG_CPU_LLSERIAL_S3C2440=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_WATCHDOG is not set
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-
-#
-# Power management
-#
-# CONFIG_SAMSUNG_PM_DEBUG is not set
-# CONFIG_SAMSUNG_PM_CHECK is not set
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_S3C_GPIO_SPACE=0
-
-#
-# S3C2400 Machines
-#
-CONFIG_S3C2410_PM=y
-CONFIG_S3C2410_GPIO=y
-
-#
-# S3C2410 Machines
-#
-# CONFIG_ARCH_SMDK2410 is not set
-# CONFIG_ARCH_H1940 is not set
-# CONFIG_MACH_N30 is not set
-# CONFIG_ARCH_BAST is not set
-# CONFIG_MACH_OTOM is not set
-# CONFIG_MACH_AML_M5900 is not set
-# CONFIG_MACH_TCT_HAMMER is not set
-# CONFIG_MACH_VR1000 is not set
-# CONFIG_MACH_QT2410 is not set
-
-#
-# S3C2412 Machines
-#
-# CONFIG_MACH_JIVE is not set
-# CONFIG_MACH_SMDK2413 is not set
-# CONFIG_MACH_SMDK2412 is not set
-# CONFIG_MACH_VSTMS is not set
-CONFIG_CPU_S3C2440=y
-CONFIG_S3C2440_DMA=y
-
-#
-# S3C2440 Machines
-#
-# CONFIG_MACH_ANUBIS is not set
-# CONFIG_MACH_OSIRIS is not set
-# CONFIG_MACH_RX3715 is not set
-# CONFIG_ARCH_S3C2440 is not set
-# CONFIG_MACH_NEXCODER_2440 is not set
-# CONFIG_MACH_AT2440EVB is not set
+CONFIG_S3C24XX_PWM=y
CONFIG_MACH_MINI2440=y
-
-#
-# S3C2442 Machines
-#
-
-#
-# S3C2443 Machines
-#
-# CONFIG_MACH_SMDK2443 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
@@ -385,82 +40,21 @@
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
-CONFIG_GARP=m
CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@@ -470,10 +64,6 @@
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
@@ -484,298 +74,60 @@
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
CONFIG_CFG80211=m
CONFIG_CFG80211_REG_DEBUG=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_FTL=y
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
CONFIG_INFTL=y
CONFIG_RFD_FTL=y
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_S3C2410=y
-# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-# CONFIG_MTD_NAND_S3C2410_HWECC is not set
-# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
CONFIG_MTD_LPDDR=y
-CONFIG_MTD_QINFO_PROBE=y
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
+CONFIG_SENSORS_TSL2550=m
CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_AR9170_USB is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_SDIO=m
CONFIG_ZD1211RW=m
CONFIG_ZD1211RW_DEBUG=y
-# CONFIG_RT2X00 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
@@ -784,1065 +136,159 @@
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS=3
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C2440=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=128
CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_S3C2410=y
CONFIG_I2C_SIMTEC=y
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-CONFIG_SENSORS_TSL2550=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_S3C24XX=y
-# CONFIG_SPI_S3C24XX_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IBMAEM is not set
-# CONFIG_SENSORS_IBMPEX is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=m
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_S3C2410_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_AU0828 is not set
-CONFIG_SOC_CAMERA=m
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-# CONFIG_SOC_CAMERA_MT9M111 is not set
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-CONFIG_SOC_CAMERA_PLATFORM=m
-# CONFIG_SOC_CAMERA_OV772X is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-CONFIG_USB_GSPCA_ZC3XX=m
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_PWC_INPUT_EVDEV is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_RADIO_TEA5764 is not set
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-# CONFIG_TTPCI_EEPROM is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_S3C2410=y
-# CONFIG_FB_S3C2410_DEBUG is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
-CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_SOC=y
CONFIG_SND_S3C24XX_SOC=y
-CONFIG_SND_S3C24XX_SOC_I2S=y
-# CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650 is not set
-CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_L3=y
-CONFIG_SND_SOC_UDA134X=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
CONFIG_HID_TOPSEED=y
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=m
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=m
-# CONFIG_USB_STORAGE_FREECOM is not set
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP210X=m
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
CONFIG_USB_SERIAL_SPCP8X5=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
CONFIG_USB_GADGET_S3C2410=y
-CONFIG_USB_S3C2410=y
-# CONFIG_USB_S3C2410_DEBUG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SPI=y
CONFIG_MMC_S3C=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_S3C24XX=y
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_S3C=y
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
CONFIG_ROMFS_BACKED_BY_BOTH=y
-CONFIG_ROMFS_ON_BLOCK=y
-CONFIG_ROMFS_ON_MTD=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
@@ -1882,165 +328,41 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
CONFIG_KEYS=y
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-CONFIG_SECURITY_FILE_CAPABILITIES=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=y
@@ -2048,7 +370,6 @@
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
@@ -2056,41 +377,8 @@
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig
index 4b55dcb..47ad3b1 100644
--- a/arch/arm/configs/mmp2_defconfig
+++ b/arch/arm/configs/mmp2_defconfig
@@ -1,1223 +1,88 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Wed Apr 28 11:23:19 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
CONFIG_ARCH_MMP=y
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_MACH_TAVOREVB is not set
-
-#
-# Marvell PXA168/910/MMP2 Implmentations
-#
-# CONFIG_MACH_ASPENITE is not set
-# CONFIG_MACH_ZYLONITE2 is not set
-# CONFIG_MACH_AVENGERS_LITE is not set
-# CONFIG_MACH_TTC_DKB is not set
CONFIG_MACH_FLINT=y
CONFIG_MACH_MARVELL_JASPER=y
-CONFIG_CPU_MMP2=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_TAUROS2=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH=""
-# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_PXA3xx is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_MAX8925=y
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_MAX8649=y
-# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8925=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_MAX8925=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_MAX8925=y
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_DYNAMIC_DEBUG=y
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig
index fe25e3b..2b8f7af 100644
--- a/arch/arm/configs/msm_defconfig
+++ b/arch/arm/configs/msm_defconfig
@@ -1,894 +1,72 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Wed Nov 7 01:36:45 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_GPIOS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_PANIC_TIMEOUT=0
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_GOLDFISH is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
CONFIG_ARCH_MSM=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# MSM7200 Board Type
-#
CONFIG_MACH_HALIBUT=y
-CONFIG_SERIAL_MSM=y
-CONFIG_SERIAL_MSM_CONSOLE=y
-# CONFIG_SERIAL_MSM_NOINIT is not set
-CONFIG_MSM_SMD=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_MSM_NAND=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_GOLDFISH_NAND is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-CONFIG_MSM_RMNET=y
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_MEP is not set
-CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI=y
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_UINPUT is not set
-CONFIG_INPUT_GPIO=y
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DCC_TTY=y
-# CONFIG_GOLDFISH_TTY is not set
-CONFIG_BINDER=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_MSM=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCA9633=y
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-CONFIG_SENSORS_AKM8976=y
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
# CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_LOW_MEMORY_KILLER=y
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_MSM=y
-# CONFIG_FB_GOLDFISH is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# USB Function Support
-#
-CONFIG_USB_FUNCTION=y
-CONFIG_USB_FUNCTION_MSM_HSUSB=y
-# CONFIG_USB_FUNCTION_NULL is not set
-# CONFIG_USB_FUNCTION_ZERO is not set
-# CONFIG_USB_FUNCTION_LOOPBACK is not set
-CONFIG_USB_FUNCTION_ADB=y
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Android
-#
-# CONFIG_ANDROID_GADGET is not set
-# CONFIG_ANDROID_RAM_CONSOLE is not set
-CONFIG_ANDROID_LOGGER=y
-CONFIG_ANDROID_VIBRATOR=y
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index da4710d..b0d0824 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -1,1687 +1,140 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc4
-# Mon May 4 14:22:12 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
CONFIG_ARCH_MV78XX0=y
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Marvell MV78xx0 Implementations
-#
CONFIG_MACH_DB78X00_BP=y
CONFIG_MACH_RD78X00_MASA=y
CONFIG_MACH_TERASTATION_WXL=y
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_FEROCEON=y
-CONFIG_CPU_FEROCEON_OLD_ID=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_FEROCEON_L2=y
-# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HIGHMEM=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
CONFIG_NET_PKTGEN=m
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
-# CONFIG_RTC_DRV_M41T80_WDT is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4_FS=m
-# CONFIG_EXT4DEV_COMPAT is not set
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx1_defconfig b/arch/arm/configs/mx1_defconfig
index f575070..2f38d97 100644
--- a/arch/arm/configs/mx1_defconfig
+++ b/arch/arm/configs/mx1_defconfig
@@ -1,1104 +1,90 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Wed Apr 8 11:11:33 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-CONFIG_ARCH_MX1ADS=y
-
-#
-# Freescale MXC Implementations
-#
CONFIG_ARCH_MX1=y
-# CONFIG_ARCH_MX2 is not set
-# CONFIG_ARCH_MX3 is not set
-
-#
-# MX1 platforms:
-#
-CONFIG_MACH_MXLADS=y
+CONFIG_ARCH_MX1ADS=y
CONFIG_MACH_SCB9328=y
CONFIG_MXC_IRQ_PRIOR=y
-# CONFIG_MXC_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
CONFIG_I2C_IMX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_MXC=y
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
CONFIG_W1_SLAVE_THERM=y
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
CONFIG_USB_GADGET_IMX=y
-CONFIG_USB_IMX=y
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_ETH=m
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_MXC=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig
index 1ecd627..6454e18 100644
--- a/arch/arm/configs/mx21_defconfig
+++ b/arch/arm/configs/mx21_defconfig
@@ -1,1169 +1,97 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Tue Apr 14 16:58:09 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX1 is not set
CONFIG_ARCH_MX2=y
-# CONFIG_ARCH_MX3 is not set
-CONFIG_MACH_MX21=y
-# CONFIG_MACH_MX27 is not set
-
-#
-# MX2 platforms:
-#
CONFIG_MACH_MX21ADS=y
-# CONFIG_MXC_IRQ_PRIOR is not set
CONFIG_MXC_PWM=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=3
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_MXC=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_CS89x0=y
-CONFIG_CS89x0_NONISA_IRQ=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
CONFIG_I2C_IMX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
CONFIG_FB_IMX=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_MXC=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
index b4c1366..b2038b0 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -1,1273 +1,121 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Fri Jul 24 16:08:06 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX1 is not set
CONFIG_ARCH_MX2=y
-# CONFIG_ARCH_MX3 is not set
-# CONFIG_MACH_MX21 is not set
CONFIG_MACH_MX27=y
-
-#
-# MX2 platforms:
-#
CONFIG_MACH_MX27ADS=y
CONFIG_MACH_PCM038=y
-CONFIG_MACH_PCM970_BASEBOARD=y
CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_IMX27LITE=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_MXC=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
CONFIG_FEC=y
-# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
CONFIG_I2C_IMX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_MXC=y
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
CONFIG_W1_SLAVE_THERM=y
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
CONFIG_FB_IMX=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_MXC=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_RATIONAL=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx31pdk_defconfig b/arch/arm/configs/mx31pdk_defconfig
index d409537..2d29329 100644
--- a/arch/arm/configs/mx31pdk_defconfig
+++ b/arch/arm/configs/mx31pdk_defconfig
@@ -1,772 +1,44 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Sun Oct 26 15:55:29 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX2 is not set
-CONFIG_ARCH_MX3=y
-
-#
-# MX3 Options
-#
# CONFIG_MACH_MX31ADS is not set
-# CONFIG_MACH_PCM037 is not set
-# CONFIG_MACH_MX31LITE is not set
CONFIG_MACH_MX31_3DS=y
-# CONFIG_MXC_IRQ_PRIOR is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_UNEVICTABLE_LRU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
CONFIG_NET_KEY=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_WM8400 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_PCBC is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index 8a06bc6..161f907 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -1,203 +1,17 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sun Nov 1 22:56:24 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX1 is not set
-# CONFIG_ARCH_MX2 is not set
-# CONFIG_ARCH_MX25 is not set
-CONFIG_ARCH_MX3=y
-# CONFIG_ARCH_MXC91231 is not set
-CONFIG_ARCH_MX31=y
-CONFIG_ARCH_MX35=y
-
-#
-# MX3 platforms:
-#
-CONFIG_MACH_MX31ADS=y
CONFIG_MACH_MX31ADS_WM1133_EV1=y
CONFIG_MACH_PCM037=y
CONFIG_MACH_PCM037_EET=y
@@ -212,1001 +26,98 @@
CONFIG_MACH_KZM_ARM11_01=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
-CONFIG_ARCH_HAS_RNGA=y
-CONFIG_ARCH_MXC_IOMUX_V3=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_MXC=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
CONFIG_DNET=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
CONFIG_FEC=y
-# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
CONFIG_I2C_IMX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_MXC=y
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
CONFIG_W1_SLAVE_THERM=y
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-CONFIG_MFD_WM8350=y
-CONFIG_MFD_WM8350_CONFIG_MODE_0=y
-CONFIG_MFD_WM8352_CONFIG_MODE_0=y
CONFIG_MFD_WM8350_I2C=y
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_WM8350=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
# CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_CONTIG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
CONFIG_SOC_CAMERA=y
CONFIG_SOC_CAMERA_MT9M001=y
CONFIG_SOC_CAMERA_MT9M111=y
CONFIG_SOC_CAMERA_MT9T031=y
CONFIG_SOC_CAMERA_MT9V022=y
CONFIG_SOC_CAMERA_TW9910=y
-# CONFIG_SOC_CAMERA_PLATFORM is not set
CONFIG_SOC_CAMERA_OV772X=y
-CONFIG_MX3_VIDEO=y
CONFIG_VIDEO_MX3=y
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-CONFIG_FB_MX3=y
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_MXC=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_MX3_IPU=y
-CONFIG_MX3_IPU_IRQS=4
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_RATIONAL=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
index a708fd6..a665ecb 100644
--- a/arch/arm/configs/mx51_defconfig
+++ b/arch/arm/configs/mx51_defconfig
@@ -1,528 +1,61 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Tue Feb 2 15:20:48 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX1 is not set
-# CONFIG_ARCH_MX2 is not set
-# CONFIG_ARCH_MX25 is not set
-# CONFIG_ARCH_MX3 is not set
-# CONFIG_ARCH_MXC91231 is not set
CONFIG_ARCH_MX5=y
-CONFIG_ARCH_MX51=y
-
-#
-# MX5 platforms:
-#
CONFIG_MACH_MX51_BABBAGE=y
-# CONFIG_MXC_IRQ_PRIOR is not set
-CONFIG_MXC_TZIC=y
-# CONFIG_MXC_PWM is not set
-CONFIG_ARCH_MXC_IOMUX_V3=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_VFP=y
-CONFIG_VFPv3=y
CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
CONFIG_PM_TEST_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
@@ -541,761 +74,98 @@
CONFIG_MDIO_GPIO=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
CONFIG_FEC=y
-# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_IMX is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_MXC=y
-
-
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_SDHCI=m
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_MXC is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_MXC is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
# CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
CONFIG_KEYS=y
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_RATIONAL=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig
index de0c28a..993e94d 100644
--- a/arch/arm/configs/n770_defconfig
+++ b/arch/arm/configs/n770_defconfig
@@ -1,1421 +1,138 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8-omap1
-# Fri Jan 18 10:21:06 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_SRAM_PATCH=y
CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_BOOT_TAG=y
-CONFIG_OMAP_BOOT_REASON=y
-CONFIG_OMAP_COMPONENT_VERSION=y
-CONFIG_OMAP_GPIO_SWITCH=y
# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_STI=y
-CONFIG_OMAP_STI_CONSOLE=y
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MMU_FWK=y
CONFIG_OMAP_MBOX_FWK=y
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
# CONFIG_ARCH_OMAP15XX is not set
CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
CONFIG_MACH_NOKIA770=y
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
CONFIG_OMAP_ARM_216MHZ=y
-# CONFIG_OMAP_ARM_192MHZ is not set
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 time"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=y
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUSB is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-CONFIG_BT_HCIBRF6150=y
-# CONFIG_BT_HCIH4P is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_OMAP_HW=y
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TSC2102 is not set
-# CONFIG_TOUCHSCREEN_TSC210X is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-CONFIG_SENSORS_TLV320AIC23=y
-# CONFIG_GPIOEXPANDER_OMAP is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
CONFIG_SPI_OMAP_UWIRE=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TSC2101 is not set
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_OMAP=y
CONFIG_FB_OMAP_LCDC_EXTERNAL=y
CONFIG_FB_OMAP_LCDC_HWA742=y
-# CONFIG_FB_OMAP_LCDC_BLIZZARD is not set
CONFIG_FB_OMAP_MANUAL_UPDATE=y
CONFIG_FB_OMAP_LCD_MIPID=y
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
CONFIG_SND_DUMMY=y
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_OMAP_AIC23=y
-# CONFIG_SND_OMAP_TSC2101 is not set
-# CONFIG_SND_SX1 is not set
-# CONFIG_SND_OMAP_TSC2102 is not set
-# CONFIG_SND_OMAP24XX_EAC is not set
-
-#
-# SPI devices
-#
-
-#
-# USB devices
-#
CONFIG_SND_USB_AUDIO=y
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_FILE_STORAGE_TEST=y
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
CONFIG_MMC_OMAP=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# CBUS support
-#
-CONFIG_CBUS=y
-CONFIG_CBUS_TAHVO=y
-CONFIG_CBUS_TAHVO_USER=y
-CONFIG_CBUS_TAHVO_USB=y
-# CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT is not set
-CONFIG_CBUS_RETU=y
-CONFIG_CBUS_RETU_USER=y
-CONFIG_CBUS_RETU_POWERBUTTON=y
-CONFIG_CBUS_RETU_RTC=y
-CONFIG_CBUS_RETU_WDT=y
-# CONFIG_CBUS_RETU_HEADSET is not set
-CONFIG_OMAP_DSP=y
-# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
-CONFIG_OMAP_DSP_FBEXPORT=y
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_SECURITY_LOWMEM is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig
index 9405e32..56aebb6 100644
--- a/arch/arm/configs/n8x0_defconfig
+++ b/arch/arm/configs/n8x0_defconfig
@@ -1,1226 +1,94 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc5
-# Thu Aug 6 22:17:23 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_CLASSIC_RCU is not set
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
CONFIG_OMAP_RESET_CLOCKS=y
# CONFIG_OMAP_MUX is not set
# CONFIG_OMAP_MCBSP is not set
CONFIG_OMAP_MBOX_FWK=y
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
-CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP Core Type
-#
CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
-
-#
-# OMAP Board Type
-#
-CONFIG_MACH_OMAP2_TUSB6010=y
-# CONFIG_MACH_OMAP_H4 is not set
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
-CONFIG_MACH_NOKIA_N800=y
-CONFIG_MACH_NOKIA_N810=y
-CONFIG_MACH_NOKIA_N810_WIMAX=y
CONFIG_MACH_NOKIA_N8X0=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x10C08000
CONFIG_ZBOOT_ROM_BSS=0x10200000
-# CONFIG_ZBOOT_ROM is not set
CONFIG_CMDLINE="root=/dev/mmcblk0p2 console=ttyS2,115200n8 debug earlyprintk rootwait"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_HAVE_MTD_OTP=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
CONFIG_MTD_ONENAND_OMAP2=y
CONFIG_MTD_ONENAND_OTP=y
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
-# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_HELPER_AUTO is not set
-# CONFIG_I2C_SMBUS is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
CONFIG_MENELAUS=y
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_TUSB6010=y
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
CONFIG_USB_MUSB_OTG=y
CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
# CONFIG_MUSB_PIO_ONLY is not set
-# CONFIG_USB_INVENTRA_DMA is not set
-# CONFIG_USB_TI_CPPI_DMA is not set
-CONFIG_USB_TUSB_OMAP_DMA=y
CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_ETH=m
CONFIG_USB_ETH_EEM=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
-CONFIG_NOP_USB_XCEIV=y
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_OMAP=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig
index d165c75..462dd18 100644
--- a/arch/arm/configs/neocore926_defconfig
+++ b/arch/arm/configs/neocore926_defconfig
@@ -1,1301 +1,104 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Jul 29 10:46:54 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
CONFIG_ARCH_AT91SAM9263=y
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9263 Board Type
-#
-# CONFIG_MACH_AT91SAM9263EK is not set
-# CONFIG_MACH_USB_A9263 is not set
CONFIG_MACH_NEOCORE926=y
-
-#
-# AT91 Board Options
-#
CONFIG_MTD_AT91_DATAFLASH_CARD=y
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_VERIFY_WRITE=y
CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
CONFIG_ATMEL_PWM=y
CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_SERIAL_ATMEL_PDC is not set
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_ATMEL_LCDC=y
-# CONFIG_BACKLIGHT_ATMEL_PWM is not set
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
+CONFIG_MMC_AT91=m
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig
index 171265e..d7dc992 100644
--- a/arch/arm/configs/neponset_defconfig
+++ b/arch/arm/configs/neponset_defconfig
@@ -1,1141 +1,90 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11
-# Wed Mar 9 14:28:26 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
CONFIG_SA1100_ASSABET=y
CONFIG_ASSABET_NEPONSET=y
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
CONFIG_PCMCIA_SA1100=y
CONFIG_PCMCIA_SA1111=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x80000
CONFIG_ZBOOT_ROM_BSS=0xc1000000
CONFIG_ZBOOT_ROM=y
CONFIG_CMDLINE="console=ttySA0,38400n8 cpufreq=221200 rw root=/dev/mtdblock2 mtdparts=sa1100:512K(boot),1M(kernel),2560K(initrd),4M(root) load_ramdisk=1 prompt_ramdisk=0 mem=32M noinitrd initrd=0xc0800000,3M"
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_SA1110=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-CONFIG_APM=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_SA1100=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_SCSI=m
+CONFIG_BLK_DEV_SD=m
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
CONFIG_NET_VENDOR_SMC=y
-# CONFIG_WD80x3 is not set
-# CONFIG_ULTRA is not set
-CONFIG_SMC91X=y
CONFIG_SMC9194=y
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
+CONFIG_SMC91X=y
CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_SA1111=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_SA1111=y
CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_DIGI is not set
-# CONFIG_ESPSERIAL is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_CS=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SA1100=y
CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=64
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_SA1100_WATCHDOG=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_WATCHDOG=y
+CONFIG_SA1100_WATCHDOG=m
CONFIG_FB=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_SA1100=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_TVMIXER is not set
-# CONFIG_SOUND_AD1980 is not set
-
-#
-# USB support
-#
+# CONFIG_USB_HID is not set
CONFIG_USB=m
CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-CONFIG_USB_MOUSE=m
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=m
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_STORAGE=m
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_SCHEDSTATS is not set
-CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig
index 78f58a9..25ed772 100644
--- a/arch/arm/configs/netwinder_defconfig
+++ b/arch/arm/configs/netwinder_defconfig
@@ -1,1043 +1,87 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 15:18:42 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_ARCH_FOOTBRIDGE=y
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Footbridge Implementations
-#
-# CONFIG_ARCH_CATS is not set
-# CONFIG_ARCH_PERSONAL_SERVER is not set
-# CONFIG_ARCH_EBSA285_ADDIN is not set
-# CONFIG_ARCH_EBSA285_HOST is not set
CONFIG_ARCH_NETWINDER=y
-CONFIG_FOOTBRIDGE=y
-CONFIG_FOOTBRIDGE_HOST=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA110=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
CONFIG_LEDS=y
-# CONFIG_LEDS_TIMER is not set
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=0x301"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-CONFIG_PARPORT_PC_SUPERIO=y
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-# CONFIG_IP_NF_IRC is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
-# CONFIG_IP_NF_MATCH_LIMIT is not set
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_MAC is not set
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-# CONFIG_IP_NF_MATCH_MARK is not set
-# CONFIG_IP_NF_MATCH_MULTIPORT is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-# CONFIG_IP_NF_MATCH_AH_ESP is not set
-# CONFIG_IP_NF_MATCH_LENGTH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_TCPMSS is not set
-# CONFIG_IP_NF_MATCH_HELPER is not set
-# CONFIG_IP_NF_MATCH_STATE is not set
-# CONFIG_IP_NF_MATCH_CONNTRACK is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-# CONFIG_IP_NF_FILTER is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_TARGET_TCPMSS is not set
-# CONFIG_IP_NF_NAT is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=y
+CONFIG_PARPORT_PC_SUPERIO=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_SL82C105=y
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=y
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_21285 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_21285_WATCHDOG is not set
-CONFIG_977_WATCHDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
CONFIG_DS1620=y
CONFIG_NWBUTTON=y
CONFIG_NWBUTTON_REBOOT=y
CONFIG_NWFLASH=y
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_WATCHDOG=y
+CONFIG_977_WATCHDOG=y
CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=y
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_CMPCI is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_ES1370 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUND_MAESTRO3 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_VIA82CXXX is not set
CONFIG_SOUND_OSS=y
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
-# CONFIG_SOUND_AD1816 is not set
-# CONFIG_SOUND_AD1889 is not set
-# CONFIG_SOUND_SGALAXY is not set
-# CONFIG_SOUND_ADLIB is not set
-# CONFIG_SOUND_ACI_MIXER is not set
-# CONFIG_SOUND_CS4232 is not set
-# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_GUS is not set
-# CONFIG_SOUND_VMIDI is not set
-# CONFIG_SOUND_TRIX is not set
-# CONFIG_SOUND_MSS is not set
-# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_NM256 is not set
-# CONFIG_SOUND_MAD16 is not set
-# CONFIG_SOUND_PAS is not set
-# CONFIG_SOUND_PSS is not set
-# CONFIG_SOUND_SB is not set
-# CONFIG_SOUND_AWE32_SYNTH is not set
-# CONFIG_SOUND_MAUI is not set
CONFIG_SOUND_YM3812=y
-# CONFIG_SOUND_OPL3SA1 is not set
-# CONFIG_SOUND_OPL3SA2 is not set
-# CONFIG_SOUND_YMFPCI is not set
-# CONFIG_SOUND_UART6850 is not set
-# CONFIG_SOUND_AEDSP16 is not set
CONFIG_SOUND_WAVEARTIST=y
-# CONFIG_SOUND_ALI5455 is not set
-# CONFIG_SOUND_FORTE is not set
-# CONFIG_SOUND_RME96XX is not set
-# CONFIG_SOUND_AD1980 is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig
index 2a97e36..316af54 100644
--- a/arch/arm/configs/netx_defconfig
+++ b/arch/arm/configs/netx_defconfig
@@ -1,923 +1,86 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc6
-# Tue Jun 6 15:26:53 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
CONFIG_ARCH_NETX=y
-
-#
-# NetX Implementations
-#
CONFIG_MACH_NXDKN=y
CONFIG_MACH_NXDB500=y
CONFIG_MACH_NXEB500HMI=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_VIC=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttySMX0,115200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
CONFIG_IP_NF_QUEUE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
CONFIG_NET_NETX=y
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_NETX=y
CONFIG_SERIAL_NETX_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_NVRAM=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_NETX=m
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 92d9086..0e2dc26 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -1,388 +1,42 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Tue Jun 23 22:57:16 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
CONFIG_ARCH_NOMADIK=y
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Nomadik boards
-#
CONFIG_MACH_NOMADIK_8815NHK=y
-CONFIG_NOMADIK_8815=y
-CONFIG_I2C_BITBANG_8815NHK=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
-# CONFIG_IP_PIMSM_V1 is not set
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@@ -392,924 +46,87 @@
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_TESTS=m
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_VERIFY_WRITE=y
CONFIG_MTD_NAND_NOMADIK=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
CONFIG_NETCONSOLE=m
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_PL061 is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_WACOM is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ns9xxx_defconfig b/arch/arm/configs/ns9xxx_defconfig
index 7dc1580..1f528a0 100644
--- a/arch/arm/configs/ns9xxx_defconfig
+++ b/arch/arm/configs/ns9xxx_defconfig
@@ -3,26 +3,11 @@
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_NS9XXX=y
-CONFIG_MACH_A9M9360=y
-CONFIG_MACH_A9M9750=y
-CONFIG_MACH_CC7UCAMRY=y
-CONFIG_MACH_CC9C=y
-CONFIG_MACH_CC9P9210=y
-CONFIG_MACH_CC9P9210JS=y
-CONFIG_MACH_CC9P9215=y
-CONFIG_MACH_CC9P9215JS=y
CONFIG_MACH_CC9P9360DEV=y
CONFIG_MACH_CC9P9360JS=y
-CONFIG_MACH_CC9P9360VAL=y
-CONFIG_MACH_CC9P9750DEV=y
-CONFIG_MACH_CC9P9750VAL=y
-CONFIG_MACH_CCW9C=y
-CONFIG_MACH_INC20OTTER=y
-CONFIG_MACH_OTTER=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_FPE_NWFPE=y
@@ -39,24 +24,18 @@
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_BLK_DEV_LOOP=m
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
-CONFIG_NS9XXX_ETH=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_NS921X=y
-CONFIG_SERIAL_NS921X_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_ADC_NS9215=m
CONFIG_I2C=m
CONFIG_I2C_GPIO=m
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_DEBUG is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
@@ -65,7 +44,6 @@
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_RTC_CLASS=m
-CONFIG_RTC_DRV_NS9215=m
CONFIG_EXT2_FS=m
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=m
@@ -73,7 +51,6 @@
CONFIG_ROOT_NFS=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
diff --git a/arch/arm/configs/nuc910_defconfig b/arch/arm/configs/nuc910_defconfig
index f80848a..10180cf 100644
--- a/arch/arm/configs/nuc910_defconfig
+++ b/arch/arm/configs/nuc910_defconfig
@@ -1,904 +1,60 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Wed Jun 10 22:09:25 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
CONFIG_USER_NS=y
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
-# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
CONFIG_ARCH_W90X900=y
-CONFIG_CPU_W90P910=y
-
-#
-# W90P910 Machines
-#
-CONFIG_MACH_W90P910EVB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_STACKTRACE=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig
index 51cc2a2..27aa873 100644
--- a/arch/arm/configs/nuc950_defconfig
+++ b/arch/arm/configs/nuc950_defconfig
@@ -1,972 +1,76 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc7
-# Tue Nov 17 12:31:33 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
CONFIG_USER_NS=y
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
CONFIG_ARCH_W90X900=y
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_CPU_NUC950=y
-
-#
-# W90P910 Machines
-#
# CONFIG_MACH_W90P910EVB is not set
-
-#
-# NUC950 Machines
-#
CONFIG_MACH_W90P950EVB=y
-
-#
-# NUC960 Machines
-#
-# CONFIG_MACH_W90N960EVB is not set
-
-#
-# NUC932 Machines
-#
-# CONFIG_MACH_NUC932EVB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NUC900=y
CONFIG_GPM1040A0_320X240=y
CONFIG_FB_NUC900_DEBUG=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/nuc960_defconfig b/arch/arm/configs/nuc960_defconfig
index aa7e128..56fd7ad 100644
--- a/arch/arm/configs/nuc960_defconfig
+++ b/arch/arm/configs/nuc960_defconfig
@@ -1,921 +1,66 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc7
-# Tue Nov 17 12:20:11 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
CONFIG_USER_NS=y
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
CONFIG_ARCH_W90X900=y
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_CPU_NUC960=y
-
-#
-# W90P910 Machines
-#
# CONFIG_MACH_W90P910EVB is not set
-
-#
-# NUC950 Machines
-#
-# CONFIG_MACH_W90P950EVB is not set
-
-#
-# NUC960 Machines
-#
CONFIG_MACH_W90N960EVB=y
-
-#
-# NUC932 Machines
-#
-# CONFIG_MACH_NUC932EVB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index 5a9e95f..aa24172 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -1,1388 +1,134 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Wed Oct 1 17:14:22 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
# CONFIG_OMAP_MUX is not set
# CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_ARCH_OMAP34XX=y
CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
CONFIG_MACH_OMAP3_BEAGLE=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
CONFIG_TWL4030_CORE=y
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
CONFIG_USB_MUSB_OTG=y
CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig
index 94dfcf0a..5db9a6b 100644
--- a/arch/arm/configs/omap3_defconfig
+++ b/arch/arm/configs/omap3_defconfig
@@ -1,287 +1,36 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc7
-# Thu May 13 10:54:43 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_OPROFILE_ARMV6=y
-CONFIG_OPROFILE_ARM11_CORE=y
-CONFIG_OPROFILE_ARMV7=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
CONFIG_ARCH_OMAP2=y
CONFIG_ARCH_OMAP3=y
CONFIG_ARCH_OMAP4=y
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_DEVICES=y
-CONFIG_OMAP_DEBUG_LEDS=y
CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
-CONFIG_OMAP_32K_TIMER_HZ=128
-CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP Core Type
-#
CONFIG_ARCH_OMAP2420=y
CONFIG_ARCH_OMAP2430=y
CONFIG_ARCH_OMAP3430=y
-CONFIG_OMAP_PACKAGE_CBB=y
-CONFIG_OMAP_PACKAGE_CUS=y
-CONFIG_OMAP_PACKAGE_CBP=y
-
-#
-# OMAP Board Type
-#
-CONFIG_MACH_OMAP2_TUSB6010=y
CONFIG_MACH_OMAP_H4=y
CONFIG_MACH_OMAP_APOLLON=y
CONFIG_MACH_OMAP_2430SDP=y
@@ -294,9 +43,6 @@
CONFIG_MACH_OMAP3_PANDORA=y
CONFIG_MACH_OMAP3_TOUCHBOOK=y
CONFIG_MACH_OMAP_3430SDP=y
-CONFIG_MACH_NOKIA_N800=y
-CONFIG_MACH_NOKIA_N810=y
-CONFIG_MACH_NOKIA_N810_WIMAX=y
CONFIG_MACH_NOKIA_N8X0=y
CONFIG_MACH_NOKIA_RX51=y
CONFIG_MACH_OMAP_ZOOM2=y
@@ -306,264 +52,41 @@
CONFIG_MACH_SBC3530=y
CONFIG_MACH_OMAP_3630SDP=y
CONFIG_MACH_OMAP_4430SDP=y
-# CONFIG_OMAP3_EMU is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-# CONFIG_PL310_ERRATA_588369 is not set
-CONFIG_ARM_GIC=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_SMP is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_HW_PERF_EVENTS=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyS2,115200"
-# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-CONFIG_VFPv3=y
CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
-# CONFIG_PM_ADVANCED_DEBUG is not set
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
@@ -573,1689 +96,197 @@
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
CONFIG_MTD_OOPS=y
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_GENERIC is not set
CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=y
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_BLK_DEV_DM is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_TI_DAVINCI_EMAC is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IWM is not set
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_USB=y
CONFIG_LIBERTAS_SDIO=y
-# CONFIG_LIBERTAS_SPI is not set
CONFIG_LIBERTAS_DEBUG=y
-# CONFIG_LIBERTAS_MESH is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC75XX is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_USB_SIERRA_NET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_OMAP is not set
CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=y
-# CONFIG_INPUT_TWL4030_VIBRA is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-CONFIG_HW_RANDOM_OMAP=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
CONFIG_W1=y
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
-# CONFIG_MAX63XX_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
CONFIG_MENELAUS=y
CONFIG_TWL4030_CORE=y
CONFIG_TWL4030_POWER=y
-CONFIG_TWL4030_CODEC=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP is not set
CONFIG_FB_OMAP_LCD_VGA=y
-# CONFIG_OMAP2_DSS is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
-# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_SOC=y
CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
-# CONFIG_SND_OMAP_SOC_N810 is not set
-# CONFIG_SND_OMAP_SOC_OVERO is not set
-# CONFIG_SND_OMAP_SOC_OMAP3EVM is not set
-# CONFIG_SND_OMAP_SOC_AM3517EVM is not set
-# CONFIG_SND_OMAP_SOC_SDP3430 is not set
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
-# CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE is not set
-# CONFIG_SND_OMAP_SOC_ZOOM2 is not set
-# CONFIG_SND_OMAP_SOC_IGEP0020 is not set
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MAGICMOUSE is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 243x high speed USB support
-#
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
CONFIG_USB_MUSB_OTG=y
CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=y
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
-CONFIG_TWL4030_USB=y
-CONFIG_NOP_USB_XCEIV=y
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL92330=y
CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
-# CONFIG_PROVE_RCU is not set
-CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
index b02e371..3b072e8 100644
--- a/arch/arm/configs/omap3_evm_defconfig
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -1,1585 +1,160 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc5
-# Mon May 18 14:01:52 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_SMARTREFLEX=y
-# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
# CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_ARCH_OMAP34XX=y
CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
CONFIG_MACH_OMAP3EVM=y
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-CONFIG_VFPv3=y
CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_OMAP_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_GENERIC is not set
CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
CONFIG_OMAP2_DSS=y
CONFIG_OMAP2_VRAM_SIZE=4
# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
-# CONFIG_OMAP2_DSS_RFBI is not set
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
CONFIG_FB_OMAP2=y
# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
CONFIG_PANEL_GENERIC=y
-# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
CONFIG_PANEL_SHARP_LS037V7DW01=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
CONFIG_USB_MUSB_OTG=y
CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TWL4030_USB is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig
index 5d08e0b..d5a6226 100644
--- a/arch/arm/configs/omap3_pandora_defconfig
+++ b/arch/arm/configs/omap3_pandora_defconfig
@@ -1,1796 +1,158 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Sat Feb 6 20:25:41 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
-# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
CONFIG_ARCH_OMAP3430=y
-CONFIG_OMAP_PACKAGE_CBB=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
CONFIG_MACH_OMAP3_PANDORA=y
-# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_IGEP0020 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
-# CONFIG_OMAP3_EMU is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE=" debug "
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-CONFIG_VFPv3=y
CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=y
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_ALS is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
CONFIG_TWL4030_CORE=y
CONFIG_TWL4030_POWER=y
-CONFIG_TWL4030_CODEC=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=0
-CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
-# CONFIG_OMAP2_DSS_RFBI is not set
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
-# CONFIG_PANEL_GENERIC is not set
-# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
-# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
-# CONFIG_PANEL_TOPPOLY_TDO35S is not set
CONFIG_PANEL_TPO_TD043MTEA1=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_SOC=y
CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
CONFIG_USB_MUSB_PERIPHERAL=y
-# CONFIG_USB_MUSB_OTG is not set
CONFIG_USB_GADGET_MUSB_HDRC=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
+CONFIG_USB_ETH=m
CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-# CONFIG_SHM_SIGNAL is not set
-# CONFIG_IOQ is not set
diff --git a/arch/arm/configs/omap3_stalker_lks_defconfig b/arch/arm/configs/omap3_stalker_lks_defconfig
index 83365f0..1d1ab0b 100644
--- a/arch/arm/configs/omap3_stalker_lks_defconfig
+++ b/arch/arm/configs/omap3_stalker_lks_defconfig
@@ -1,1691 +1,150 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc7
-# Mon May 17 16:57:28 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
-# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
# CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
-CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
CONFIG_ARCH_OMAP3430=y
-CONFIG_OMAP_PACKAGE_CUS=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_DEVKIT8000 is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_IGEP0020 is not set
CONFIG_MACH_SBC3530=y
-# CONFIG_MACH_OMAP_3630SDP is not set
-# CONFIG_OMAP3_EMU is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-CONFIG_VFPv3=y
CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
-# CONFIG_PM_ADVANCED_DEBUG is not set
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_OMAP2 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_GENERIC is not set
CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_TI_DAVINCI_EMAC is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
-# CONFIG_TWL4030_WATCHDOG is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_TWL4030_CODEC is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_OMAP2_DSS is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
CONFIG_USB_MUSB_OTG=y
CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap3_touchbook_defconfig b/arch/arm/configs/omap3_touchbook_defconfig
index 968fbaa..e988ecc 100644
--- a/arch/arm/configs/omap3_touchbook_defconfig
+++ b/arch/arm/configs/omap3_touchbook_defconfig
@@ -1,475 +1,91 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc8
-# Fri Dec 4 16:02:17 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_OPROFILE_ARMV7=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
CONFIG_OMAP_RESET_CLOCKS=y
# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
CONFIG_MACH_OMAP3_TOUCHBOOK=y
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_IGEP0020 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE=" debug "
-# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_VFP=y
-CONFIG_VFPv3=y
CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_BIC=m
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
-# CONFIG_DEFAULT_BIC is not set
-CONFIG_DEFAULT_CUBIC=y
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_VEGAS is not set
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
-# CONFIG_IPV6_PIMSM_V2 is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
@@ -481,33 +97,21 @@
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -516,38 +120,24 @@
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
CONFIG_IP_VS_DEBUG=y
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
@@ -558,18 +148,8 @@
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
CONFIG_IP_VS_FTP=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -581,22 +161,10 @@
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
@@ -605,10 +173,6 @@
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
@@ -626,62 +190,19 @@
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
-# CONFIG_BRIDGE_NF_EBTABLES is not set
CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=y
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=y
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_RDS is not set
CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_STP=m
-CONFIG_GARP=m
CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
@@ -696,15 +217,9 @@
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
@@ -712,20 +227,7 @@
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_IND=y
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
@@ -735,10 +237,6 @@
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
CONFIG_BT_HCIBTUSB=y
CONFIG_BT_HCIBTSDIO=y
CONFIG_BT_HCIUART=y
@@ -748,230 +246,38 @@
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-# CONFIG_RXKAD is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_WIMAX=m
-CONFIG_WIMAX_DEBUG_LEVEL=8
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
@@ -979,22 +285,15 @@
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID6_PQ=m
-# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
-# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_MULTIPATH_QL is not set
-# CONFIG_DM_MULTIPATH_ST is not set
CONFIG_DM_DELAY=m
-# CONFIG_DM_UEVENT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
@@ -1002,44 +301,8 @@
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_VETH=m
-# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_IWM is not set
-
-#
-# WiMAX Wireless Broadband devices
-#
-# CONFIG_WIMAX_I2400M_USB is not set
-# CONFIG_WIMAX_I2400M_SDIO is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
# CONFIG_ATM_DRIVERS is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
@@ -1050,620 +313,81 @@
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-# CONFIG_PPPOATM is not set
-CONFIG_PPPOL2TP=m
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_TWL4030 is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_BQ27x00=y
-# CONFIG_BATTERY_MAX17040 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
-# CONFIG_TWL4030_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_TWL4030_CODEC is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
-CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_RAWMIDI_SEQ=m
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
# CONFIG_SND_ARM is not set
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_SOC=y
CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_OXU210HP_HCD=y
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
CONFIG_USB_MUSB_OTG=y
CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
@@ -1671,7 +395,6 @@
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP210X is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -1707,14 +430,11 @@
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
-# CONFIG_USB_SERIAL_QUALCOMM is not set
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-# CONFIG_USB_SERIAL_SYMBOL is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
@@ -1722,441 +442,95 @@
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_DEBUG=m
-
-#
-# USB Miscellaneous drivers
-#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_ATM is not set
CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ZERO_HNPTEST=y
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=y
-# CONFIG_ISP1301_OMAP is not set
CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
-
-#
-# TI VLYNQ
-#
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_W35UND is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_ECHO is not set
-# CONFIG_OTUS is not set
-# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_INPUT_MIMIO is not set
-# CONFIG_TRANZPORT is not set
-
-#
-# Android
-#
-
-#
-# Qualcomm MSM Camera And Video
-#
-
-#
-# Camera Sensor Selection
-#
-# CONFIG_INPUT_GPIO is not set
-# CONFIG_DST is not set
-# CONFIG_POHMELFS is not set
-# CONFIG_PLAN9AUTH is not set
-# CONFIG_LINE6_USB is not set
-# CONFIG_USB_SERIAL_QUATECH2 is not set
-# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
-# CONFIG_VT6656 is not set
-# CONFIG_FB_UDL is not set
-
-#
-# RAR Register Driver
-#
-# CONFIG_RAR_REGISTER is not set
-# CONFIG_IIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
-# CONFIG_REISERFS_FS_POSIX_ACL is not set
-# CONFIG_REISERFS_FS_SECURITY is not set
CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-# CONFIG_JFFS2_CMODE_PRIORITY is not set
-# CONFIG_JFFS2_CMODE_SIZE is not set
CONFIG_JFFS2_CMODE_FAVOURLZO=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_UPCALL is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_DFS_UPCALL is not set
CONFIG_CIFS_EXPERIMENTAL=y
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
@@ -2195,183 +569,37 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_ASYNC_PQ=m
-CONFIG_ASYNC_RAID6_RECOV=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=y
@@ -2379,7 +607,6 @@
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
@@ -2387,44 +614,8 @@
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig
index 45b4eba..0cf4147 100644
--- a/arch/arm/configs/omap_2430sdp_defconfig
+++ b/arch/arm/configs/omap_2430sdp_defconfig
@@ -1,1303 +1,136 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:47:37 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-# CONFIG_ARCH_OMAP1 is not set
CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
# CONFIG_OMAP_MUX_WARNINGS is not set
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
-# CONFIG_ARCH_OMAP2420 is not set
CONFIG_ARCH_OMAP2430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_N800 is not set
-# CONFIG_MACH_OMAP_H4 is not set
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
CONFIG_MACH_OMAP_2430SDP=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_GENERIC is not set
CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_OMAP is not set
CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TSC2102 is not set
-# CONFIG_TOUCHSCREEN_TSC210X is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_OMAP=y
+CONFIG_SPI=y
+# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_GPIOEXPANDER_OMAP is not set
CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_GPIO=y
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MENELAUS is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_OMAP24XX is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TSC2101 is not set
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
-CONFIG_USB_OTG=y
-CONFIG_USB_OTG_WHITELIST=y
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MON=m
CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 243x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
CONFIG_USB_MUSB_OTG=y
CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-CONFIG_USB_MUSB_LOGLEVEL=0
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
CONFIG_MMC_OMAP_HS=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
index ddde429..5dbe595 100644
--- a/arch/arm/configs/omap_3430sdp_defconfig
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -1,1727 +1,178 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc9-omap1
-# Tue Sep 15 16:48:34 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
CONFIG_MACH_OMAP_3430SDP=y
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS2,115200 root=/dev/mmcblk0p3 rootwait debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-CONFIG_VFPv3=y
CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_OMAP2 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_OMAP_STI is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP_LCD_VGA is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
CONFIG_OMAP2_DSS=y
CONFIG_OMAP2_VRAM_SIZE=4
-CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-# CONFIG_OMAP2_DSS_RFBI is not set
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
CONFIG_PANEL_GENERIC=y
CONFIG_PANEL_SHARP_LS037V7DW01=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
CONFIG_USB_MUSB_OTG=y
CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_OMAP_DEBUG is not set
-# CONFIG_LEDS_OMAP is not set
-# CONFIG_LEDS_OMAP_PWM is not set
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
# CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_3630sdp_defconfig b/arch/arm/configs/omap_3630sdp_defconfig
index 609f348..8e8f4e9 100644
--- a/arch/arm/configs/omap_3630sdp_defconfig
+++ b/arch/arm/configs/omap_3630sdp_defconfig
@@ -1,1610 +1,154 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Thu Nov 12 12:21:37 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
CONFIG_MACH_OMAP_3630SDP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_VERBOSE=y
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
CONFIG_W1=y
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-# CONFIG_TWL4030_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
CONFIG_USB_MUSB_OTG=y
CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
CONFIG_USB_AUDIO=m
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_TWL4030 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig
index 1fb0456..63e0c2d 100644
--- a/arch/arm/configs/omap_4430sdp_defconfig
+++ b/arch/arm/configs/omap_4430sdp_defconfig
@@ -1,1279 +1,122 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc7
-# Wed May 12 12:26:05 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_LOCKBREAK=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
CONFIG_ARCH_OMAP4=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-
-#
-# OMAP Board Type
-#
CONFIG_MACH_OMAP_4430SDP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
CONFIG_PL310_ERRATA_588369=y
-CONFIG_ARM_GIC=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_NR_CPUS=2
-# CONFIG_HOTPLUG_CPU is not set
# CONFIG_LOCAL_TIMERS is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS2,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-CONFIG_VFPv3=y
CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_UNIX is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
CONFIG_KS8851=y
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_TWL4030 is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
-# CONFIG_TWL4030_WATCHDOG is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_TWL4030_CODEC is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
# CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCRYPT is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig
index cc86342..0b24858 100644
--- a/arch/arm/configs/omap_apollon_2420_defconfig
+++ b/arch/arm/configs/omap_apollon_2420_defconfig
@@ -1,961 +1,92 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 12:07:29 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
# CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_N800 is not set
-# CONFIG_MACH_OMAP_H4 is not set
CONFIG_MACH_OMAP_APOLLON=y
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_MTD_ONENAND_OMAP2 is not set
-# CONFIG_MTD_ONENAND_OTP is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_OMAP_WATCHDOG=y
CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TSC2101 is not set
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
# CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
+CONFIG_WATCHDOG=y
+CONFIG_OMAP_WATCHDOG=y
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
# CONFIG_HID is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1510_defconfig b/arch/arm/configs/omap_generic_1510_defconfig
index 61744e5..0e42ba4e 100644
--- a/arch/arm/configs/omap_generic_1510_defconfig
+++ b/arch/arm/configs/omap_generic_1510_defconfig
@@ -1,1171 +1,84 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 12:20:19 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
-# CONFIG_MACH_AMS_DELTA is not set
CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET_MII=y
CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
-# CONFIG_USB_ALI_M5632 is not set
CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OMAP is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_OMAP=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1610_defconfig b/arch/arm/configs/omap_generic_1610_defconfig
index d773857..5e536cf 100644
--- a/arch/arm/configs/omap_generic_1610_defconfig
+++ b/arch/arm/configs/omap_generic_1610_defconfig
@@ -1,1177 +1,87 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 13:01:27 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_DM_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
# CONFIG_ARCH_OMAP15XX is not set
CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
-# CONFIG_MACH_NOKIA770 is not set
CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET_MII=y
CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OMAP is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_GPIOEXPANDER_OMAP is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_OMAP=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1710_defconfig b/arch/arm/configs/omap_generic_1710_defconfig
index 6ec487e..c0867b1 100644
--- a/arch/arm/configs/omap_generic_1710_defconfig
+++ b/arch/arm/configs/omap_generic_1710_defconfig
@@ -1,1087 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 13:02:08 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
# CONFIG_OMAP_MUX is not set
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_DM_TIMER is not set
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
# CONFIG_ARCH_OMAP15XX is not set
CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
-# CONFIG_MACH_NOKIA770 is not set
CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=tty0 console=ttyS2,115200 root=0801"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
CONFIG_ARTHUR=y
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET_MII=y
CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
-# CONFIG_USB_AN2720 is not set
# CONFIG_USB_BELKIN is not set
# CONFIG_USB_ARMLINUX is not set
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
-# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_SECURITY_LOWMEM is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_2420_defconfig b/arch/arm/configs/omap_generic_2420_defconfig
index 7218b96..ac08e51 100644
--- a/arch/arm/configs/omap_generic_2420_defconfig
+++ b/arch/arm/configs/omap_generic_2420_defconfig
@@ -1,654 +1,37 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:44:48 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_USER_NS is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
# CONFIG_OMAP_MUX is not set
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_DSP is not set
CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_N800 is not set
-# CONFIG_MACH_OMAP_H4 is not set
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x10C08000
CONFIG_ZBOOT_ROM_BSS=0x10200000
-# CONFIG_ZBOOT_ROM is not set
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
+CONFIG_ROMFS_FS=y
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index 91ef2ed..e2de2aa 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -1,1339 +1,109 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2-omap1
-# Wed Feb 20 17:12:36 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_SRAM_PATCH=y
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-CONFIG_OMAP_GPIO_SWITCH=y
-CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
# CONFIG_ARCH_OMAP15XX is not set
CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
CONFIG_MACH_OMAP_H2=y
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
-# CONFIG_MACH_NOKIA770 is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
-# CONFIG_OMAP_ARM_192MHZ is not set
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
-CONFIG_OMAP_ARM_60MHZ=y
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
CONFIG_LEDS=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 rw initrd=0x10600000,8M ramdisk_size=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-# CONFIG_ATAGS_PROC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
CONFIG_DEBUG_DRIVER=y
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=3
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_OMAP_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=y
-# CONFIG_SLIP_SMART is not set
-# CONFIG_SLIP_MODE_SLIP6 is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-CONFIG_ISP1301_OMAP=y
-CONFIG_TPS65010=y
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_GPIOEXPANDER_OMAP is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
CONFIG_SPI_OMAP_UWIRE=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-CONFIG_SPI_TSC2101=y
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_TSC210X is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
CONFIG_USB_OTG=y
-CONFIG_USB_OTG_WHITELIST=y
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_OHCI_HCD=y
CONFIG_USB_TEST=y
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_ETH=m
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
CONFIG_MMC_OMAP=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_OMAP=y
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-# CONFIG_OMAP_DSP is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig
index b12b406..858f93a 100644
--- a/arch/arm/configs/omap_h4_2420_defconfig
+++ b/arch/arm/configs/omap_h4_2420_defconfig
@@ -1,1119 +1,107 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:44:58 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_DEVICES=y
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_N800 is not set
CONFIG_MACH_OMAP_H4=y
-# CONFIG_MACH_OMAP_H4_TUSB is not set
-# CONFIG_MACH_OMAP_H4_OTG is not set
-# CONFIG_MACH_OMAP2_H4_USB1 is not set
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=y
CONFIG_IRCOMM=y
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-CONFIG_OMAP_IR=y
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
+CONFIG_I2C=y
+CONFIG_I2C_OMAP=y
+# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_TLV320AIC23 is not set
-CONFIG_GPIOEXPANDER_OMAP=y
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
CONFIG_MENELAUS=y
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_innovator_1510_defconfig b/arch/arm/configs/omap_innovator_1510_defconfig
index e9c1408..265af26 100644
--- a/arch/arm/configs/omap_innovator_1510_defconfig
+++ b/arch/arm/configs/omap_innovator_1510_defconfig
@@ -1,1252 +1,102 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:45:02 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
CONFIG_MACH_OMAP_INNOVATOR=y
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200n8 root=/dev/nfs ip=bootp noinitrd"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET_MII=y
CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_OMAP=y
-CONFIG_OMAP_PS2=m
-# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OMAP is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_OMAP=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_innovator_1610_defconfig b/arch/arm/configs/omap_innovator_1610_defconfig
index fea9319..cc7fbf8 100644
--- a/arch/arm/configs/omap_innovator_1610_defconfig
+++ b/arch/arm/configs/omap_innovator_1610_defconfig
@@ -1,838 +1,58 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:45:05 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_DM_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
# CONFIG_ARCH_OMAP15XX is not set
CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
CONFIG_MACH_OMAP_INNOVATOR=y
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
-# CONFIG_MACH_NOKIA770 is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=tty0 console=ttyS0,115200 initrd=0x10200000,8M root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=m
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig
index 0efb4b0..c7bb558 100644
--- a/arch/arm/configs/omap_ldp_defconfig
+++ b/arch/arm/configs/omap_ldp_defconfig
@@ -1,1259 +1,135 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Fri Oct 10 11:49:41 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_ARCH_OMAP34XX=y
CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
CONFIG_MACH_OMAP_LDP=y
-# CONFIG_MACH_OVERO is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
CONFIG_FB_OMAP=y
CONFIG_FB_OMAP_LCD_VGA=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=4
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_GENERIC is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SND=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig
index 556fcca..9105de7 100644
--- a/arch/arm/configs/omap_osk_5912_defconfig
+++ b/arch/arm/configs/omap_osk_5912_defconfig
@@ -1,1090 +1,87 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3-omap1
-# Fri Nov 23 12:24:12 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_SRAM_PATCH=y
CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
-# CONFIG_OMAP_DM_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
# CONFIG_ARCH_OMAP15XX is not set
CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
CONFIG_MACH_OMAP_OSK=y
-# CONFIG_OMAP_OSK_MISTRAL is not set
-# CONFIG_MACH_NOKIA770 is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
CONFIG_OMAP_CF=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=m
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-CONFIG_TPS65010=y
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_GPIOEXPANDER_OMAP is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_perseus2_730_defconfig b/arch/arm/configs/omap_perseus2_730_defconfig
index 9a15d5d..aa777e6 100644
--- a/arch/arm/configs/omap_perseus2_730_defconfig
+++ b/arch/arm/configs/omap_perseus2_730_defconfig
@@ -1,927 +1,65 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:45:12 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-
-#
-# OMAP Core Type
-#
CONFIG_ARCH_OMAP730=y
# CONFIG_ARCH_OMAP15XX is not set
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
CONFIG_MACH_OMAP_PERSEUS2=y
-# CONFIG_MACH_OMAP_FSAMPLE is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_195MHZ is not set
CONFIG_OMAP_ARM_182MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_OMAP=y
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_OMAP is not set
CONFIG_FB_VIRTUAL=y
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_OMAP=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
index 881faea..0a7ed44 100644
--- a/arch/arm/configs/omap_zoom2_defconfig
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -1,663 +1,69 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-omap1
-# Fri Jun 12 17:25:46 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_LL_DEBUG_NONE=y
-CONFIG_ARCH_OMAP34XX=y
CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
CONFIG_MACH_OMAP_ZOOM2=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_VERBOSE=y
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_OMAP_STI is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_TWL4030=y
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TSC2005 is not set
-# CONFIG_TOUCHSCREEN_TSC210X is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
@@ -667,879 +73,71 @@
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_TWL4030_MADC is not set
-# CONFIG_TWL4030_POWEROFF is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
CONFIG_W1=y
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
CONFIG_USB_MUSB_OTG=y
CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-CONFIG_USB_ZERO=y
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
+CONFIG_USB_ZERO=m
CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_TWL4030 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig
index 5e55b55..f8085b0 100644
--- a/arch/arm/configs/omap_zoom3_defconfig
+++ b/arch/arm/configs/omap_zoom3_defconfig
@@ -1,682 +1,69 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Thu Nov 12 13:04:07 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_LL_DEBUG_NONE=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_CM_T35 is not set
CONFIG_MACH_OMAP_ZOOM3=y
-# CONFIG_MACH_OMAP_3630SDP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_VERBOSE=y
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_TWL4030=y
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
@@ -686,925 +73,83 @@
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
CONFIG_W1=y
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-# CONFIG_TWL4030_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
CONFIG_USB_MUSB_OTG=y
CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
CONFIG_USB_AUDIO=m
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
index 19b91de..1579857 100644
--- a/arch/arm/configs/onearm_defconfig
+++ b/arch/arm/configs/onearm_defconfig
@@ -1,1133 +1,80 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:18 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-
-#
-# AT91RM9200 Board Type
-#
CONFIG_MACH_ONEARM=y
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_KAFA is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_AT91 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
+# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-
-#
-# MMC/SD Card support
-#
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_TIFM_SD is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index ee1ebd8..439323b 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,225 +1,16 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Thu Feb 4 23:30:00 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
CONFIG_ARCH_ORION5X=y
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# Orion Implementations
-#
CONFIG_MACH_DB88F5281=y
CONFIG_MACH_RD88F5182=y
CONFIG_MACH_KUROBOX_PRO=y
@@ -242,1631 +33,147 @@
CONFIG_MACH_RD88F5181L_GE=y
CONFIG_MACH_RD88F5181L_FXO=y
CONFIG_MACH_RD88F6183AP_GE=y
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_FEROCEON=y
-CONFIG_CPU_FEROCEON_OLD_ID=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_UACCESS_WITH_MEMCPY=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
CONFIG_NET_DSA=y
-CONFIG_NET_DSA_TAG_DSA=y
-CONFIG_NET_DSA_TAG_EDSA=y
-# CONFIG_NET_DSA_TAG_TRAILER is not set
-CONFIG_NET_DSA_MV88E6XXX=y
-# CONFIG_NET_DSA_MV88E6060 is not set
-CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
CONFIG_NET_PKTGEN=m
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
# CONFIG_VGA_ARB is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
-# CONFIG_RTC_DRV_M41T80_WDT is not set
-# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_S35390A=y
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
CONFIG_MV_XOR=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_MV_CESA=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig
index bf06d36..6fa1b14 100644
--- a/arch/arm/configs/overo_defconfig
+++ b/arch/arm/configs/overo_defconfig
@@ -1,426 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Fri Oct 3 11:50:34 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_OPROFILE_ARMV7=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_ARCH_OMAP34XX=y
CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
CONFIG_MACH_OVERO=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE=" debug "
-# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_VFP=y
-CONFIG_VFPv3=y
CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
@@ -430,209 +61,34 @@
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
CONFIG_CFG80211=y
-CONFIG_NL80211=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_MAC80211=y
-
-#
-# Rate control algorithm selection
-#
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_EEPROM_93CX6=m
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
+CONFIG_EEPROM_LEGACY=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
@@ -640,64 +96,36 @@
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_DELAY=m
-# CONFIG_DM_UEVENT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
+CONFIG_USB_ZD1201=m
+CONFIG_RTL8187=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_USB=y
CONFIG_LIBERTAS_SDIO=y
CONFIG_LIBERTAS_DEBUG=y
-CONFIG_USB_ZD1201=m
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-CONFIG_RTL8187=m
-# CONFIG_MAC80211_HWSIM is not set
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
-# CONFIG_IWLWIFI_LEDS is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-
-#
-# USB Network Adapters
-#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
@@ -707,1178 +135,141 @@
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=m
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_MSP3400=m
-CONFIG_VIDEO_CS53L32A=m
-CONFIG_VIDEO_WM8775=m
-CONFIG_VIDEO_SAA711X=m
-CONFIG_VIDEO_CX25840=m
-CONFIG_VIDEO_CX2341X=m
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_AU0828 is not set
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-# CONFIG_USB_GSPCA is not set
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_PVRUSB2_SYSFS=y
-CONFIG_VIDEO_PVRUSB2_DVB=y
-# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-# CONFIG_VIDEO_EM28XX is not set
-CONFIG_VIDEO_USBVISION=m
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_QUICKCAM_MESSENGER=m
-# CONFIG_USB_ET61X251 is not set
-CONFIG_VIDEO_OVCAMCHIP=m
-CONFIG_USB_W9968CF=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_ZC0301 is not set
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-CONFIG_USB_ZR364XX=m
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-# CONFIG_TTPCI_EEPROM is not set
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m
-CONFIG_DVB_USB_DIGITV=m
-CONFIG_DVB_USB_VP7045=m
-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_AF9005=m
-CONFIG_DVB_USB_AF9005_REMOTE=m
-# CONFIG_DVB_USB_DW2102 is not set
-# CONFIG_DVB_USB_ANYSEE is not set
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_DVB_CINERGYT2=m
-# CONFIG_DVB_CINERGYT2_TUNING is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_CX24123=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_TDA10086=m
-CONFIG_DVB_VES1X93=m
-CONFIG_DVB_TUNER_ITD1000=m
-CONFIG_DVB_TDA826X=m
-CONFIG_DVB_TUA6100=m
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-# CONFIG_DVB_DRX397XD is not set
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
-CONFIG_DVB_TDA10048=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_TDA10023=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-CONFIG_DVB_NXT200X=m
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-CONFIG_DVB_BCM3510=m
-CONFIG_DVB_LGDT330X=m
-CONFIG_DVB_S5H1409=m
-CONFIG_DVB_AU8522=m
-CONFIG_DVB_S5H1411=m
-
-#
-# Digital terrestrial only tuners/PLL
-#
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
-
-#
-# SEC control devices for DVB-S
-#
-CONFIG_DVB_LNBP21=m
-# CONFIG_DVB_ISL6405 is not set
-CONFIG_DVB_ISL6421=m
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
-# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_SOC=y
CONFIG_SND_OMAP_SOC=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
CONFIG_MUSB_PIO_ONLY=y
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_CRYPTD=m
-# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/palmte_defconfig b/arch/arm/configs/palmte_defconfig
index feffaa2..828d7cb 100644
--- a/arch/arm/configs/palmte_defconfig
+++ b/arch/arm/configs/palmte_defconfig
@@ -1,760 +1,48 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc1-omap1
-# Sat May 19 11:04:27 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-CONFIG_OMAP_GPIO_SWITCH=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
CONFIG_MACH_OMAP_PALMTE=y
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-CONFIG_OMAP_RTC=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
# CONFIG_HWMON is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=y
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
CONFIG_MMC_OMAP=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/palmtt_defconfig b/arch/arm/configs/palmtt_defconfig
index 55d5b7d..31d02c4 100644
--- a/arch/arm/configs/palmtt_defconfig
+++ b/arch/arm/configs/palmtt_defconfig
@@ -1,843 +1,56 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc3-omap1
-# Sun Oct 29 00:36:12 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-CONFIG_OMAP_LL_DEBUG_UART2=y
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_OMAP_DSP=y
-# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
-# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
-CONFIG_OMAP_DSP_FBEXPORT=y
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
CONFIG_MACH_OMAP_PALMTT=y
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rw init=/init"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETDEVICES is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=320
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TSC2102 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_OMAP_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
CONFIG_SPI_OMAP_UWIRE=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_TSC2102 is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_OMAP=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_OMAP=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
-CONFIG_BACKLIGHT_OMAP=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
CONFIG_RTC_DRV_OMAP=y
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# Synchronous Serial Interfaces (SSI)
-#
-# CONFIG_OMAP_UWIRE is not set
-# CONFIG_OMAP_TSC2101 is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
-CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
diff --git a/arch/arm/configs/palmz71_defconfig b/arch/arm/configs/palmz71_defconfig
index 6efc746..c478db6 100644
--- a/arch/arm/configs/palmz71_defconfig
+++ b/arch/arm/configs/palmz71_defconfig
@@ -1,890 +1,53 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc1-omap1
-# Thu Jun 7 05:13:00 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION="-z71"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_LL_DEBUG_LCD is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
CONFIG_MACH_OMAP_PALMZ71=y
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
-# CONFIG_NETDEVICES is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=320
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TSC210X is not set
-# CONFIG_TOUCHSCREEN_TSC2046 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
CONFIG_SPI_OMAP_UWIRE=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TSC2101 is not set
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_TSC210X is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_OMAP=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
CONFIG_MMC_OMAP=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_OMAP=y
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig
index 6d162b1..4baa83c 100644
--- a/arch/arm/configs/palmz72_defconfig
+++ b/arch/arm/configs/palmz72_defconfig
@@ -1,950 +1,85 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Sun Aug 24 02:29:27 2008
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
CONFIG_ARCH_PXA_PALM=y
# CONFIG_MACH_PALMTX is not set
-CONFIG_MACH_PALMZ72=y
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_PWM=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=tty root=/dev/mmcblk0"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_PXA is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_PXA2XX is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
-# CONFIG_APM_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_AM200EPD is not set
-# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SA1100=y
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=866
CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig
index fa153f2..583a061 100644
--- a/arch/arm/configs/pcm027_defconfig
+++ b/arch/arm/configs/pcm027_defconfig
@@ -1,1095 +1,102 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Fri Dec 21 10:52:09 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_ARMCORE is not set
CONFIG_MACH_PCM027=y
CONFIG_MACH_PCM990_BASEBOARD=y
-CONFIG_PXA27x=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_PXA2XX is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=y
CONFIG_SND_PXA2XX_AC97=y
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
CONFIG_MMC_PXA=y
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_PCF8563=m
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SA1100=m
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig
index 6e7155c..4c9afa4 100644
--- a/arch/arm/configs/picotux200_defconfig
+++ b/arch/arm/configs/picotux200_defconfig
@@ -1,355 +1,51 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Wed Mar 28 16:19:50 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
CONFIG_MACH_PICOTUX2XX=y
-# CONFIG_MACH_KAFA is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=y
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@@ -359,429 +55,70 @@
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
+CONFIG_EEPROM_LEGACY=m
CONFIG_SCSI=m
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=m
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_SENSORS_DS1337=m
-CONFIG_SENSORS_DS1374=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SENSORS_PCF8574=m
-CONFIG_SENSORS_PCA9539=m
-CONFIG_SENSORS_PCF8591=m
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
CONFIG_HWMON=m
-CONFIG_HWMON_VID=m
-# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=m
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
@@ -796,440 +133,49 @@
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
+CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_SMSC47B397=m
-# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=m
CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET_MII=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=m
CONFIG_MMC_AT91=m
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_AT91RM9200=m
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=m
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
CONFIG_NLS_DEFAULT="utf-8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
@@ -1269,115 +215,28 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-CONFIG_CRC32=y
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig
index dbfabb5..d1efbdc 100644
--- a/arch/arm/configs/pleb_defconfig
+++ b/arch/arm/configs/pleb_defconfig
@@ -1,745 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:03:02 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_KOBJECT_UEVENT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_HOTPLUG is not set
# CONFIG_SHMEM is not set
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
CONFIG_SA1100_PLEB=y
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttySA0,9600 mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0400000,4M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_SA1100=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_IPV6 is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
CONFIG_SMC91X=y
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SA1100=y
CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_DEBUG_KERNEL=y
diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig
index 2f7b9ce..bd481f0 100644
--- a/arch/arm/configs/pnx4008_defconfig
+++ b/arch/arm/configs/pnx4008_defconfig
@@ -1,272 +1,55 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Mon Sep 11 13:59:24 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
CONFIG_AUDIT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
CONFIG_ARCH_PNX4008=y
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
@@ -277,64 +60,10 @@
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
CONFIG_IP6_NF_QUEUE=m
-
-#
-# DECnet: Netfilter Configuration
-#
CONFIG_DECNET_NF_GRABULATOR=m
-
-#
-# Bridge: Netfilter Configuration
-#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -354,42 +83,17 @@
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
-# CONFIG_BRIDGE_EBT_ULOG is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
-# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
@@ -397,23 +101,11 @@
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
-# CONFIG_NET_DIVERT is not set
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
-
-#
-# QoS and/or fair queueing
-#
CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-
-#
-# Queueing/Scheduling
-#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
@@ -426,303 +118,71 @@
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-# CONFIG_IEEE80211_CRYPT_WEP is not set
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-# CONFIG_MTD_DOCPROBE_ADVANCED is not set
-CONFIG_MTD_DOCPROBE_ADDRESS=0
-
-#
-# NAND Flash Device Drivers
-#
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_NANDSIM=m
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
+CONFIG_EEPROM_LEGACY=m
CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-CONFIG_SCSI_SATA=m
CONFIG_SCSI_DEBUG=m
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-CONFIG_STRIP=m
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Wan interfaces
-#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_WAN=y
CONFIG_HDLC=m
-CONFIG_HDLC_RAW=y
-CONFIG_HDLC_RAW_ETH=y
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-CONFIG_HDLC_X25=y
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+CONFIG_HDLC_X25=m
CONFIG_DLCI=m
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-CONFIG_WAN_ROUTER_DRIVERS=y
+CONFIG_WAN_ROUTER_DRIVERS=m
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
-
-#
-# ATM drivers
-#
-# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
@@ -738,44 +198,15 @@
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_TSDEV=m
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
-CONFIG_INPUT_MOUSE=y
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_XTKBD=m
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_VSXXXAA=m
@@ -799,736 +230,187 @@
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
-# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_GUNZE=m
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
-CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-
-#
-# USB-based Watchdog Cards
-#
-CONFIG_USBPCWATCHDOG=m
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SENSORS_PCF8574=m
-# CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCF8591=m
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_BITBANG=y
-
-#
-# SPI Protocol Masters
-#
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-CONFIG_DVB=y
-CONFIG_DVB_CORE=m
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_DVB_CINERGYT2=m
-CONFIG_DVB_CINERGYT2_TUNING=y
-CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
-CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
-CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
-CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
-CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_CX24110=m
-# CONFIG_DVB_CX24123 is not set
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_VES1X93=m
-# CONFIG_DVB_S5H1420 is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-# CONFIG_DVB_ZL10353 is not set
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-
-#
-# Miscellaneous devices
-#
-CONFIG_DVB_LNBP21=m
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_USBPCWATCHDOG=m
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_MPU401_UART=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
-
-#
-# ALSA ARM devices
-#
-
-#
-# USB devices
-#
CONFIG_SND_USB_AUDIO=m
-
-#
-# Open Sound System
-#
CONFIG_SOUND_PRIME=m
-# CONFIG_OSS_OBSOLETE_DRIVER is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_BANDWIDTH=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_SL811_HCD=m
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
-CONFIG_USB_AIPTEK=m
-CONFIG_USB_WACOM=m
-# CONFIG_USB_ACECAD is not set
-CONFIG_USB_KBTAB=m
-CONFIG_USB_POWERMATE=m
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-CONFIG_USB_XPAD=m
-CONFIG_USB_ATI_REMOTE=m
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_SL811_HCD=m
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
-# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=m
-CONFIG_USB_PHIDGETKIT=m
-CONFIG_USB_PHIDGETSERVO=m
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
CONFIG_USB_TEST=m
-
-#
-# USB DSL modem support
-#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
-# CONFIG_USB_CXACRU is not set
-# CONFIG_USB_UEAGLEATM is not set
-# CONFIG_USB_XUSBATM is not set
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-
-#
-# MMC/SD Card support
-#
CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=m
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
-CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
-CONFIG_JFFS_FS=m
-CONFIG_JFFS_FS_VERBOSE=0
-CONFIG_JFFS_PROC_FS=y
CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V4=y
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
-CONFIG_RXRPC=m
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
-# CONFIG_ACORN_PARTITION_CUMANA is not set
-# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
-# CONFIG_ACORN_PARTITION_ADFS is not set
-# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
@@ -1567,96 +449,24 @@
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-CONFIG_SECURITY_ROOTPLUG=m
-CONFIG_SECURITY_SECLVL=m
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRC16=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_PLIST=y
diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig
index 113511f..74d7e01 100644
--- a/arch/arm/configs/pxa168_defconfig
+++ b/arch/arm/configs/pxa168_defconfig
@@ -1,973 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Tue Jan 12 08:57:10 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
CONFIG_ARCH_MMP=y
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_MACH_TAVOREVB is not set
-
-#
-# Marvell PXA168/910 Implmentations
-#
CONFIG_MACH_ASPENITE=y
CONFIG_MACH_ZYLONITE2=y
CONFIG_MACH_AVENGERS_LITE=y
-# CONFIG_MACH_TTC_DKB is not set
-CONFIG_CPU_PXA168=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_MOHAWK=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig
index 3365c5d..917a070 100644
--- a/arch/arm/configs/pxa255-idp_defconfig
+++ b/arch/arm/configs/pxa255-idp_defconfig
@@ -1,796 +1,59 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:20:17 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
CONFIG_ARCH_PXA_IDP=y
-# CONFIG_PXA_SHARPSL is not set
-CONFIG_PXA25x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs ip=dhcp console=ttyS0,115200 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IPV6 is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_SHARP_SL is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_SMC91X=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig
index 82ca6c8..1677a06 100644
--- a/arch/arm/configs/pxa3xx_defconfig
+++ b/arch/arm/configs/pxa3xx_defconfig
@@ -1,1331 +1,134 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc1
-# Mon Jul 13 22:48:49 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_CLASSIC_RCU is not set
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-CONFIG_CPU_PXA320=y
-CONFIG_CPU_PXA930=y
-CONFIG_CPU_PXA935=y
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-CONFIG_MACH_ZYLONITE=y
CONFIG_MACH_LITTLETON=y
CONFIG_MACH_TAVOREVB=y
CONFIG_MACH_SAAR=y
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA3xx=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_XSC3L2=y
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
CONFIG_MTD_NAND_PXA3xx=y
CONFIG_MTD_NAND_PXA3xx_BUILTIN=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_LM8323 is not set
+CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_PXA27x=y
CONFIG_KEYBOARD_PXA930_ROTARY=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_PXA930_TRKBALL=y
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-CONFIG_TOUCHSCREEN_DA9034=y
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCF857X=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
CONFIG_GPIO_MAX7301=y
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_BATTERY_DA9030=y
-# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
CONFIG_PMIC_DA903X=y
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_DA903X=y
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_TDO24M=y
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA903X=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_PCA955X is not set
CONFIG_LEDS_DA903X=m
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-CONFIG_REGULATOR_DA903X=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig
index 94e20fe..1cd381e 100644
--- a/arch/arm/configs/pxa910_defconfig
+++ b/arch/arm/configs/pxa910_defconfig
@@ -1,890 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Mar 20 13:45:12 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
CONFIG_ARCH_MMP=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
CONFIG_MACH_TAVOREVB=y
-
-#
-# Marvell PXA168/910 Implmentations
-#
-# CONFIG_MACH_ASPENITE is not set
-# CONFIG_MACH_ZYLONITE2 is not set
CONFIG_MACH_TTC_DKB=y
-CONFIG_CPU_PXA910=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_MOHAWK=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
index 12d0d64..9160f3b 100644
--- a/arch/arm/configs/qil-a9260_defconfig
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -1,1255 +1,115 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Apr 15 12:28:38 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
-# CONFIG_MACH_USB_A9260 is not set
CONFIG_MACH_QIL_A9260=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_TIMER_HZ=100
-# CONFIG_AT91_EARLY_DBGU is not set
CONFIG_AT91_EARLY_USART0=y
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS1,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_AT91SAM9X_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_ETH=m
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
+CONFIG_MMC_AT91=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
CONFIG_RTC_DRV_M41T94=y
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig
index acb1a8f..f7caa90 100644
--- a/arch/arm/configs/raumfeld_defconfig
+++ b/arch/arm/configs/raumfeld_defconfig
@@ -1,1655 +1,164 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sun Nov 1 21:57:32 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-# CONFIG_CPU_PXA310 is not set
-CONFIG_CPU_PXA320=y
-# CONFIG_CPU_PXA930 is not set
-# CONFIG_CPU_PXA935 is not set
-# CONFIG_CPU_PXA950 is not set
-
-#
-# Intel/Marvell Dev Platforms (sorted by hardware release time)
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-
-#
-# Third Party Dev Platforms (sorted by vendor name)
-#
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_MACH_XCEP is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-
-#
-# End-user Products (sorted by vendor name)
-#
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_PXA_EZX is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_PALM is not set
CONFIG_MACH_RAUMFELD_RC=y
CONFIG_MACH_RAUMFELD_CONNECTOR=y
-CONFIG_MACH_RAUMFELD_PROTO=y
CONFIG_MACH_RAUMFELD_SPEAKER=y
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-CONFIG_PXA3xx=y
-CONFIG_PXA_SSP=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_XSC3L2=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="console=ttyS0,115200 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REG_DEBUG=y
-CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=y
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
CONFIG_MTD_NAND_PXA3xx=y
-# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_ISL29003=y
CONFIG_TI_DAC7512=y
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
CONFIG_LIBERTAS=y
-# CONFIG_LIBERTAS_USB is not set
CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_IWM is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
CONFIG_USB_NET_MCS7830=y
-# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_EETI=m
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
-# CONFIG_SPI_PXA2XX is not set
-
-#
-# SPI Protocol Masters
-#
CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-CONFIG_W1=m
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
CONFIG_W1_MASTER_GPIO=m
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-CONFIG_W1_SLAVE_DS2760=m
-# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
-# CONFIG_APM_POWER is not set
CONFIG_BATTERY_DS2760=m
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_LIS3_SPI=y
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_MAX8660=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-CONFIG_PXA3XX_GCU=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_LOGO_RAUMFELD_CLUT224=y
CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_LIB=y
-# CONFIG_SND_PXA2XX_AC97 is not set
-CONFIG_SND_SPI=y
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_PXA2XX_SOC=y
-CONFIG_SND_PXA_SOC_SSP=y
CONFIG_SND_SOC_RAUMFELD=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AK4104=y
-CONFIG_SND_SOC_CS4270=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
-# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
CONFIG_RTC_DRV_PXA=y
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
-# CONFIG_UIO_PDRV is not set
-# CONFIG_UIO_PDRV_GENIRQ is not set
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_XIP=y
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
-# CONFIG_FSCACHE_HISTOGRAM is not set
-# CONFIG_FSCACHE_DEBUG is not set
CONFIG_CACHEFILES=y
-# CONFIG_CACHEFILES_DEBUG is not set
-# CONFIG_CACHEFILES_HISTOGRAM is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFS_FSCACHE=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
@@ -1688,211 +197,12 @@
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig
index 1237017..9312ef9 100644
--- a/arch/arm/configs/realview-smp_defconfig
+++ b/arch/arm/configs/realview-smp_defconfig
@@ -1,1095 +1,90 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Mon Nov 10 14:41:47 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
CONFIG_ARCH_REALVIEW=y
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# RealView platform type
-#
CONFIG_MACH_REALVIEW_EB=y
-# CONFIG_REALVIEW_EB_A9MP is not set
CONFIG_REALVIEW_EB_ARM11MP=y
-# CONFIG_REALVIEW_EB_ARM11MP_REVB is not set
CONFIG_MACH_REALVIEW_PB11MP=y
-# CONFIG_MACH_REALVIEW_PB1176 is not set
-# CONFIG_MACH_REALVIEW_PBA8 is not set
-CONFIG_REALVIEW_HIGH_PHYS_OFFSET=y
-
-#
-# Processor Type
-#
-# CONFIG_CPU_ARM926T is not set
-CONFIG_CPU_V6=y
-CONFIG_CPU_32v6K=y
-# CONFIG_CPU_V7 is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_GIC=y
-CONFIG_ICST307=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_NR_CPUS=4
CONFIG_HOTPLUG_CPU=y
-CONFIG_LOCAL_TIMERS=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_ARM_INTEGRATOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_WM8400 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
CONFIG_SND_ARMAACI=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_ARMMMCI=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index a509a5e..fb75192 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -1,1090 +1,89 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Mon Nov 10 14:39:48 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
CONFIG_ARCH_REALVIEW=y
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# RealView platform type
-#
CONFIG_MACH_REALVIEW_EB=y
-# CONFIG_REALVIEW_EB_A9MP is not set
CONFIG_REALVIEW_EB_ARM11MP=y
-# CONFIG_REALVIEW_EB_ARM11MP_REVB is not set
CONFIG_MACH_REALVIEW_PB11MP=y
CONFIG_MACH_REALVIEW_PB1176=y
-# CONFIG_MACH_REALVIEW_PBA8 is not set
-
-#
-# Processor Type
-#
-# CONFIG_CPU_ARM926T is not set
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-# CONFIG_CPU_V7 is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_GIC=y
-CONFIG_ICST307=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_SMP is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_ARM_INTEGRATOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_WM8400 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
CONFIG_SND_ARMAACI=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_ARMMMCI=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
index e9124a0..af278f7 100644
--- a/arch/arm/configs/rpc_defconfig
+++ b/arch/arm/configs/rpc_defconfig
@@ -1,910 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Mon Aug 6 16:47:24 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ZONE_DMA=y
-CONFIG_FIQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
CONFIG_ARCH_RPC=y
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-CONFIG_ARCH_ACORN=y
-
-#
-# Processor Type
-#
CONFIG_CPU_ARM610=y
CONFIG_CPU_ARM710=y
CONFIG_CPU_SA110=y
-CONFIG_CPU_32v3=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V3=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V3=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V3=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_TIMER_ACORN=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_1284 is not set
-CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_ARXESCSI=m
CONFIG_SCSI_CUMANA_2=m
CONFIG_SCSI_EESOXSCSI=m
CONFIG_SCSI_POWERTECSCSI=y
-
-#
-# The following drivers are not fully supported
-#
CONFIG_SCSI_CUMANA_1=m
CONFIG_SCSI_OAK1=m
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_PATA_PLATFORM=y
CONFIG_PATA_ICSIDE=y
-# CONFIG_MD is not set
+CONFIG_PATA_PLATFORM=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_ARM_ETHER1=y
CONFIG_ARM_ETHER3=y
CONFIG_ARM_ETHERH=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_POCKET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_RISCPC=y
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_RPCKBD=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=16
CONFIG_SERIAL_8250_RUNTIME_UARTS=8
-# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_ACORN=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=64
CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-CONFIG_I2C_ACORN=y
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
# CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
CONFIG_FB_ACORN=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
CONFIG_FONT_ACORN_8x8=y
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_OSS=m
-# CONFIG_SOUND_TRACEINIT is not set
-# CONFIG_SOUND_DMAP is not set
-# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_VMIDI is not set
-# CONFIG_SOUND_TRIX is not set
-# CONFIG_SOUND_MSS is not set
-# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_PAS is not set
-# CONFIG_SOUND_PSS is not set
-# CONFIG_SOUND_SB is not set
-# CONFIG_SOUND_YM3812 is not set
-# CONFIG_SOUND_UART6850 is not set
-# CONFIG_SOUND_AEDSP16 is not set
CONFIG_SOUND_VIDC=m
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
CONFIG_RTC_DRV_PCF8583=y
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
CONFIG_ADFS_FS=y
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
-CONFIG_ACORN_PARTITION_ICS=y
-CONFIG_ACORN_PARTITION_ADFS=y
-CONFIG_ACORN_PARTITION_POWERTEC=y
-CONFIG_ACORN_PARTITION_RISCIX=y
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
@@ -920,14 +116,8 @@
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
@@ -937,79 +127,9 @@
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=m
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index 56d4928..ffaef43 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -1,462 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 15:28:56 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_ARCH_OMAP34XX=y
CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
CONFIG_MACH_NOKIA_RX51=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_VFP=y
-CONFIG_VFPv3=y
CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_SECURITY is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
CONFIG_PHONET=y
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@@ -466,753 +61,80 @@
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
CONFIG_CFG80211=y
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
CONFIG_MTD_OOPS=y
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_OMAP_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
CONFIG_SMC91X=m
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_TWL4030=y
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=m
CONFIG_TWL4030_WATCHDOG=m
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-# CONFIG_USB_GSPCA is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_RADIO_TEA5764 is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-
-# Frame buffer hardware drivers
-#
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=0
# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
-# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
# CONFIG_OMAP2_DSS_DPI is not set
-# CONFIG_OMAP2_DSS_RFBI is not set
# CONFIG_OMAP2_DSS_VENC is not set
CONFIG_OMAP2_DSS_SDI=y
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
-# CONFIG_PANEL_GENERIC is not set
-# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
-# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
-# CONFIG_PANEL_TOPPOLY_TDO35S is not set
-# CONFIG_PANEL_TPO_TD043MTEA1 is not set
CONFIG_PANEL_ACX565AKM=y
-
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
@@ -1222,645 +144,79 @@
CONFIG_HID_EZKEY=m
CONFIG_HID_GYRATION=m
CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
-# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
-CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
CONFIG_USB_MUSB_OTG=y
CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
CONFIG_USB_G_NOKIA=m
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
CONFIG_TWL4030_USB=y
CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
# CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=m
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_TWL4030=m
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
-CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 9236475..f9096c1 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,557 +1,89 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Sat May 22 03:17:31 2010
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_WATCHDOG is not set
CONFIG_S3C_BOOT_ERROR_RESET=y
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_ADC=y
-CONFIG_S3C_DEV_HSMMC=y
-CONFIG_S3C_DEV_USB_HOST=y
-CONFIG_S3C_DEV_NAND=y
-CONFIG_S3C_DMA=y
-
-#
-# Power management
-#
-# CONFIG_SAMSUNG_PM_DEBUG is not set
-# CONFIG_SAMSUNG_PM_CHECK is not set
-CONFIG_PLAT_S3C24XX=y
-CONFIG_CPU_LLSERIAL_S3C2410=y
-CONFIG_CPU_LLSERIAL_S3C2440=y
-CONFIG_S3C2410_CLOCK=y
-CONFIG_S3C24XX_DCLK=y
CONFIG_S3C24XX_PWM=y
-CONFIG_S3C24XX_GPIO_EXTRA=128
-CONFIG_S3C24XX_GPIO_EXTRA64=y
-CONFIG_S3C24XX_GPIO_EXTRA128=y
-CONFIG_PM_SIMTEC=y
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-CONFIG_MACH_SMDK=y
-CONFIG_S3C24XX_SIMTEC_AUDIO=y
-
-#
-# S3C2400 Machines
-#
-CONFIG_CPU_S3C2410=y
-CONFIG_CPU_S3C2410_DMA=y
-CONFIG_S3C2410_PM=y
-CONFIG_S3C2410_GPIO=y
-CONFIG_SIMTEC_NOR=y
-CONFIG_MACH_BAST_IDE=y
-
-#
-# S3C2410 Machines
-#
CONFIG_ARCH_SMDK2410=y
CONFIG_ARCH_H1940=y
-# CONFIG_H1940BT is not set
-CONFIG_PM_H1940=y
CONFIG_MACH_N30=y
CONFIG_ARCH_BAST=y
CONFIG_MACH_OTOM=y
CONFIG_MACH_AML_M5900=y
-CONFIG_BAST_PC104_IRQ=y
CONFIG_MACH_TCT_HAMMER=y
CONFIG_MACH_VR1000=y
CONFIG_MACH_QT2410=y
-CONFIG_CPU_S3C2412=y
-CONFIG_S3C2412_DMA=y
-CONFIG_S3C2412_PM=y
-
-#
-# S3C2412 Machines
-#
CONFIG_MACH_JIVE=y
-# CONFIG_MACH_JIVE_SHOW_BOOTLOADER is not set
-CONFIG_MACH_SMDK2413=y
-CONFIG_MACH_S3C2413=y
CONFIG_MACH_SMDK2412=y
CONFIG_MACH_VSTMS=y
-CONFIG_CPU_S3C2440=y
-CONFIG_CPU_S3C2442=y
-CONFIG_CPU_S3C244X=y
-CONFIG_S3C2440_XTAL_12000000=y
-CONFIG_S3C2440_XTAL_16934400=y
-CONFIG_S3C2440_DMA=y
-
-#
-# S3C2440 and S3C2442 Machines
-#
+CONFIG_MACH_SMDK2416=y
CONFIG_MACH_ANUBIS=y
-# CONFIG_MACH_NEO1973_GTA02 is not set
+CONFIG_MACH_NEO1973_GTA02=y
CONFIG_MACH_OSIRIS=y
-# CONFIG_MACH_OSIRIS_DVS is not set
+CONFIG_MACH_OSIRIS_DVS=m
CONFIG_MACH_RX3715=y
CONFIG_ARCH_S3C2440=y
CONFIG_MACH_NEXCODER_2440=y
-CONFIG_SMDK2440_CPU2440=y
CONFIG_SMDK2440_CPU2442=y
CONFIG_MACH_AT2440EVB=y
CONFIG_MACH_MINI2440=y
-CONFIG_CPU_S3C2443=y
-CONFIG_S3C2443_DMA=y
-
-#
-# S3C2443 Machines
-#
+CONFIG_MACH_RX1950=y
CONFIG_MACH_SMDK2443=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=m
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_BIC=m
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
-# CONFIG_DEFAULT_BIC is not set
-CONFIG_DEFAULT_CUBIC=y
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_VEGAS is not set
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
-# CONFIG_IPV6_ROUTE_INFO is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
@@ -564,22 +96,13 @@
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
@@ -591,7 +114,6 @@
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -605,7 +127,6 @@
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -613,45 +134,8 @@
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
CONFIG_IP_VS=m
-# CONFIG_IP_VS_IPV6 is not set
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-# CONFIG_IP_VS_PROTO_TCP is not set
-# CONFIG_IP_VS_PROTO_UDP is not set
-# CONFIG_IP_VS_PROTO_ESP is not set
-# CONFIG_IP_VS_PROTO_AH is not set
-# CONFIG_IP_VS_PROTO_SCTP is not set
-
-#
-# IPVS scheduler
-#
-# CONFIG_IP_VS_RR is not set
-# CONFIG_IP_VS_WRR is not set
-# CONFIG_IP_VS_LC is not set
-# CONFIG_IP_VS_WLC is not set
-# CONFIG_IP_VS_LBLC is not set
-# CONFIG_IP_VS_LBLCR is not set
-# CONFIG_IP_VS_DH is not set
-# CONFIG_IP_VS_SH is not set
-# CONFIG_IP_VS_SED is not set
-# CONFIG_IP_VS_NQ is not set
-
-#
-# IPVS application helper
-#
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -663,22 +147,10 @@
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
@@ -687,10 +159,6 @@
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
@@ -708,35 +176,6 @@
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@@ -746,12 +185,6 @@
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
@@ -760,421 +193,58 @@
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_S3C2410=y
-# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-# CONFIG_MTD_NAND_S3C2410_HWECC is not set
-# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_LEGACY=m
-# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
CONFIG_BLK_DEV_PLATFORM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-CONFIG_HAVE_PATA_PLATFORM=y
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DNET is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_NET_POCKET is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IWM is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
@@ -1188,9 +258,6 @@
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
-# CONFIG_JOYSTICK_IFORCE_USB is not set
-# CONFIG_JOYSTICK_IFORCE_232 is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
@@ -1204,49 +271,8 @@
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_S3C2410 is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_HTCPEN is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
-CONFIG_TOUCHSCREEN_USB_EGALAX=y
-CONFIG_TOUCHSCREEN_USB_PANJIT=y
-CONFIG_TOUCHSCREEN_USB_3M=y
-CONFIG_TOUCHSCREEN_USB_ITM=y
-CONFIG_TOUCHSCREEN_USB_ETURBO=y
-CONFIG_TOUCHSCREEN_USB_GUNZE=y
-CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
-CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
-CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
-CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
-CONFIG_TOUCHSCREEN_USB_GOTOP=y
-CONFIG_TOUCHSCREEN_USB_JASTEC=y
-CONFIG_TOUCHSCREEN_USB_E2I=y
-CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
-CONFIG_TOUCHSCREEN_USB_ETT_TC5UH=y
-CONFIG_TOUCHSCREEN_USB_NEXIO=y
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
@@ -1256,518 +282,67 @@
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-CONFIG_GAMEPORT=m
-# CONFIG_GAMEPORT_NS558 is not set
-# CONFIG_GAMEPORT_L4 is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
-# CONFIG_SERIAL_8250_FOURPORT is not set
-# CONFIG_SERIAL_8250_ACCENT is not set
-# CONFIG_SERIAL_8250_BOCA is not set
-# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
-# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C2410=y
-CONFIG_SERIAL_S3C2412=y
-CONFIG_SERIAL_S3C2440=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
-# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=y
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_S3C2410=y
CONFIG_I2C_SIMTEC=y
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=m
-# CONFIG_SPI_BUTTERFLY is not set
CONFIG_SPI_GPIO=m
-# CONFIG_SPI_LM70_LLP is not set
CONFIG_SPI_S3C24XX=m
-# CONFIG_SPI_S3C24XX_FIQ is not set
CONFIG_SPI_S3C24XX_GPIO=m
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_TLE62X0=m
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=m
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=m
-# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=m
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
CONFIG_SENSORS_LM85=m
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_S3C is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_S3C2410_WATCHDOG=y
-# CONFIG_MAX63XX_WATCHDOG is not set
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
CONFIG_MFD_SM501=y
-# CONFIG_MFD_SM501_GPIO is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_S3C2410=y
-# CONFIG_FB_S3C2410_DEBUG is not set
CONFIG_FB_SM501=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_PWM=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_RAWMIDI_SEQ=m
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
-CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
-# CONFIG_SND_USB_UA101 is not set
CONFIG_SND_USB_CAIAQ=m
-# CONFIG_SND_USB_CAIAQ_INPUT is not set
CONFIG_SND_SOC=y
-CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_S3C24XX_SOC=y
-CONFIG_SND_S3C24XX_SOC_I2S=y
-CONFIG_SND_S3C_I2SV2_SOC=m
-CONFIG_SND_S3C2412_SOC_I2S=m
-CONFIG_SND_S3C_SOC_AC97=m
CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m
CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m
CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m
-CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=y
-# CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23 is not set
-# CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES is not set
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AC97_CODEC=m
-CONFIG_SND_SOC_L3=y
-CONFIG_SND_SOC_UDA134X=y
-CONFIG_SND_SOC_WM8750=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
# CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_APPLE=m
-# CONFIG_HID_MAGICMOUSE is not set
-# CONFIG_HID_WACOM is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_U132_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
@@ -1780,71 +355,15 @@
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=y
-# CONFIG_USB_SERIAL_CONSOLE is not set
-# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=y
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_OPTION=m
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
@@ -1862,318 +381,64 @@
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_SDHCI=m
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MMC_SDHCI_S3C is not set
CONFIG_MMC_SPI=m
CONFIG_MMC_S3C=y
-# CONFIG_MMC_S3C_HW_SDIO_IRQ is not set
-CONFIG_MMC_S3C_PIO=y
-# CONFIG_MMC_S3C_DMA is not set
-# CONFIG_MMC_S3C_PIODMA is not set
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
CONFIG_LEDS_S3C24XX=m
CONFIG_LEDS_H1940=m
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_DAC124S085=m
CONFIG_LEDS_PWM=m
CONFIG_LEDS_BD2802=m
-# CONFIG_LEDS_LT3593 is not set
-CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGER_TIMER=m
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_S3C=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-CONFIG_JBD2=m
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
@@ -2212,225 +477,13 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index a3a9993..ba6a515 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -1,1155 +1,93 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Sat May 22 03:17:32 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
CONFIG_ARCH_S3C64XX=y
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
CONFIG_S3C_BOOT_ERROR_RESET=y
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIOLIB_4BIT=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-# CONFIG_S3C_ADC is not set
-CONFIG_S3C_DEV_HSMMC=y
-CONFIG_S3C_DEV_HSMMC1=y
-CONFIG_S3C_DEV_I2C1=y
-CONFIG_S3C_DEV_FB=y
-CONFIG_S3C_DEV_USB_HOST=y
-CONFIG_S3C_DEV_USB_HSOTG=y
-CONFIG_S3C_DEV_NAND=y
-CONFIG_S3C_DMA=y
-
-#
-# Power management
-#
-# CONFIG_SAMSUNG_PM_DEBUG is not set
-# CONFIG_S3C_PM_DEBUG_LED_SMDK is not set
-# CONFIG_SAMSUNG_PM_CHECK is not set
-CONFIG_PLAT_S3C64XX=y
-CONFIG_CPU_S3C6410=y
-CONFIG_S3C64XX_DMA=y
-CONFIG_S3C64XX_SETUP_SDHCI=y
-CONFIG_S3C64XX_SETUP_I2C0=y
-CONFIG_S3C64XX_SETUP_I2C1=y
-CONFIG_S3C64XX_SETUP_FB_24BPP=y
-CONFIG_S3C64XX_SETUP_SDHCI_GPIO=y
-# CONFIG_MACH_SMDK6400 is not set
-# CONFIG_MACH_ANW6410 is not set
+CONFIG_MACH_SMDK6400=y
+CONFIG_MACH_ANW6410=y
CONFIG_MACH_SMDK6410=y
-CONFIG_SMDK6410_SD_CH0=y
-# CONFIG_SMDK6410_SD_CH1 is not set
-# CONFIG_SMDK6410_WM1190_EV1 is not set
-# CONFIG_SMDK6410_WM1192_EV1 is not set
-# CONFIG_MACH_NCP is not set
-# CONFIG_MACH_HMT is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
+CONFIG_MACH_NCP=y
+CONFIG_MACH_HMT=y
+CONFIG_MACH_SMARTQ5=y
+CONFIG_MACH_SMARTQ7=y
CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_S3C2410=y
-# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-# CONFIG_MTD_NAND_S3C2410_HWECC is not set
-# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C6400=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_S3C2410=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_S3C64XX=m
+CONFIG_FB=y
+CONFIG_FB_S3C=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_LTV350QV=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_S3C24XX_SOC=m
-CONFIG_SND_S3C_SOC_AC97=m
CONFIG_SND_SOC_SMDK_WM9713=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_WM9713=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_PL2303=m
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PLTFM is not set
CONFIG_MMC_SDHCI_S3C=y
-# CONFIG_MMC_SDHCI_S3C_DMA is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_S3C=y
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p6440_defconfig
index 619bfab..0b0266c 100644
--- a/arch/arm/configs/s5p6440_defconfig
+++ b/arch/arm/configs/s5p6440_defconfig
@@ -1,995 +1,65 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Sat May 22 03:18:18 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
CONFIG_ARCH_S5P6440=y
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
CONFIG_S3C_BOOT_ERROR_RESET=y
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIOLIB_4BIT=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-# CONFIG_S3C_ADC is not set
-
-#
-# Power management
-#
-CONFIG_PLAT_S5P=y
-CONFIG_CPU_S5P6440=y
CONFIG_MACH_SMDK6440=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C6400=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
CONFIG_DEBUG_S3C_UART=1
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig
index d7ea275..0e92a78 100644
--- a/arch/arm/configs/s5p6442_defconfig
+++ b/arch/arm/configs/s5p6442_defconfig
@@ -1,895 +1,65 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Sat May 22 03:18:19 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
CONFIG_ARCH_S5P6442=y
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIOLIB_4BIT=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-# CONFIG_S3C_ADC is not set
-
-#
-# Power management
-#
-CONFIG_PLAT_S5P=y
-CONFIG_CPU_S5P6442=y
CONFIG_MACH_SMDK6442=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS=3
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S5PV210=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
# CONFIG_ARM_UNWIND is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
CONFIG_DEBUG_S3C_UART=1
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig
index 2053be6..41bafc9 100644
--- a/arch/arm/configs/s5pc100_defconfig
+++ b/arch/arm/configs/s5pc100_defconfig
@@ -1,891 +1,49 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Wed Jul 1 15:53:07 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
CONFIG_ARCH_S5PC100=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_PLAT_S3C=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-
-#
-# Power management
-#
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_PLAT_S5PC1XX=y
-CONFIG_CPU_S5PC100_INIT=y
-CONFIG_CPU_S5PC100_CLOCK=y
-CONFIG_S5PC100_SETUP_I2C0=y
-CONFIG_CPU_S5PC100=y
CONFIG_MACH_SMDKC100=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS=3
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5pc110_defconfig b/arch/arm/configs/s5pc110_defconfig
index 796cb78..22c2d14 100644
--- a/arch/arm/configs/s5pc110_defconfig
+++ b/arch/arm/configs/s5pc110_defconfig
@@ -1,906 +1,66 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Sat May 22 03:18:21 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
CONFIG_ARCH_S5PV210=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIOLIB_4BIT=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-# CONFIG_S3C_ADC is not set
-
-#
-# Power management
-#
-CONFIG_PLAT_S5P=y
-CONFIG_CPU_S5PV210=y
-# CONFIG_MACH_SMDKV210 is not set
CONFIG_MACH_SMDKC110=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_VMSPLIT_3G is not set
CONFIG_VMSPLIT_2G=y
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0x80000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=200
-# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-CONFIG_VFPv3=y
CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S5PV210=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
CONFIG_DEBUG_S3C_UART=1
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig
index 6831dab..1753836 100644
--- a/arch/arm/configs/s5pv210_defconfig
+++ b/arch/arm/configs/s5pv210_defconfig
@@ -1,906 +1,66 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Sat May 22 03:18:22 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
CONFIG_ARCH_S5PV210=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIOLIB_4BIT=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-# CONFIG_S3C_ADC is not set
-
-#
-# Power management
-#
-CONFIG_PLAT_S5P=y
-CONFIG_CPU_S5PV210=y
CONFIG_MACH_SMDKV210=y
-# CONFIG_MACH_SMDKC110 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_VMSPLIT_3G is not set
CONFIG_VMSPLIT_2G=y
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0x80000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=200
-# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-CONFIG_VFPv3=y
CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S5PV210=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
CONFIG_DEBUG_S3C_UART=1
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig
index 81b290a..ecf2531 100644
--- a/arch/arm/configs/sam9_l9260_defconfig
+++ b/arch/arm/configs/sam9_l9260_defconfig
@@ -1,987 +1,108 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Sun Oct 14 02:01:07 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
CONFIG_AUDIT=y
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=15
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
CONFIG_MACH_SAM9_L9260=y
-
-#
-# AT91 Board Options
-#
CONFIG_MTD_AT91_DATAFLASH_CARD=y
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-# CONFIG_ATMEL_TCLIB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 mem=64M initrd=0x21100000,4194304 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=3
CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
+# CONFIG_MISC_DEVICES is not set
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
# CONFIG_HWMON is not set
-# CONFIG_MISC_DEVICES is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_GADGET=y
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1553=y
-# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_M48T86=y
-# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
@@ -1020,77 +141,8 @@
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig
index 7c49bc3..b0b9694 100644
--- a/arch/arm/configs/shannon_defconfig
+++ b/arch/arm/configs/shannon_defconfig
@@ -1,869 +1,48 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:26:46 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
CONFIG_SA1100_SHANNON=y
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttySA0,9600 console=tty1 root=/dev/mtdblock2 init=/linuxrc"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_IDEDISK is not set
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
CONFIG_PCMCIA_SMC91C92=y
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SA1100=y
CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_SA1100_WATCHDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_SA1100=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_MINIX_FS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig
index 46de124..caa07db 100644
--- a/arch/arm/configs/shark_defconfig
+++ b/arch/arm/configs/shark_defconfig
@@ -1,1248 +1,81 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-git6
-# Thu Jan 8 17:14:47 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
CONFIG_ARCH_SHARK=y
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA110=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA=y
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCI_HOST_VIA82C505=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_1284 is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=m
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-#
-# PCI IDE chipsets support
-#
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_IDE_ARM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
CONFIG_CS89x0=y
-CONFIG_CS89x0_NOEEPROM=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_NET_POCKET is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=y
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-# CONFIG_SND is not set
CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_OSS=m
-# CONFIG_SOUND_TRACEINIT is not set
-# CONFIG_SOUND_DMAP is not set
-# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_VMIDI is not set
-# CONFIG_SOUND_TRIX is not set
-# CONFIG_SOUND_MSS is not set
-# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_PAS is not set
-# CONFIG_SOUND_PSS is not set
CONFIG_SOUND_SB=m
-# CONFIG_SOUND_YM3812 is not set
-# CONFIG_SOUND_UART6850 is not set
-# CONFIG_SOUND_AEDSP16 is not set
-# CONFIG_SOUND_KAHLUA is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig
index ee25e63..af3b12e 100644
--- a/arch/arm/configs/simpad_defconfig
+++ b/arch/arm/configs/simpad_defconfig
@@ -1,451 +1,36 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:10:36 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
CONFIG_LOCALVERSION="oe1"
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
CONFIG_SA1100_SIMPAD=y
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
CONFIG_PREEMPT=y
-CONFIG_DISCONTIGMEM=y
CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-CONFIG_APM=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_IMPA7 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-CONFIG_IRPORT_SIR=m
-
-#
-# Old Serial dongle support
-#
-# CONFIG_DONGLE_OLD is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
CONFIG_SA1100_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
@@ -455,110 +40,33 @@
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_SA1100=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-CONFIG_PCMCIA_WAVELAN=m
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
-# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
@@ -567,395 +75,37 @@
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=800
-CONFIG_INPUT_TSDEV_SCREEN_Y=600
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_SA1100=y
CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_SA1100 is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=m
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/spear300_defconfig b/arch/arm/configs/spear300_defconfig
index 35e64d1..cf29f3e 100644
--- a/arch/arm/configs/spear300_defconfig
+++ b/arch/arm/configs/spear300_defconfig
@@ -1,773 +1,51 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32
-# Tue Mar 23 14:36:23 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
CONFIG_PLAT_SPEAR=y
-CONFIG_ARCH_SPEAR3XX=y
-# CONFIG_ARCH_SPEAR6XX is not set
-CONFIG_MACH_SPEAR300=y
-# CONFIG_MACH_SPEAR310 is not set
-# CONFIG_MACH_SPEAR320 is not set
-CONFIG_BOARD_SPEAR300_EVB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
CONFIG_GPIO_PL061=y
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_CPU_STALL_DETECTOR=y
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/spear310_defconfig b/arch/arm/configs/spear310_defconfig
index cbbfd29..824e444 100644
--- a/arch/arm/configs/spear310_defconfig
+++ b/arch/arm/configs/spear310_defconfig
@@ -1,775 +1,52 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32
-# Tue Mar 23 14:37:01 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
CONFIG_PLAT_SPEAR=y
-CONFIG_ARCH_SPEAR3XX=y
-# CONFIG_ARCH_SPEAR6XX is not set
-# CONFIG_MACH_SPEAR300 is not set
CONFIG_MACH_SPEAR310=y
-# CONFIG_MACH_SPEAR320 is not set
-# CONFIG_BOARD_SPEAR300_EVB is not set
-CONFIG_BOARD_SPEAR310_EVB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
CONFIG_GPIO_PL061=y
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_CPU_STALL_DETECTOR=y
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/spear320_defconfig b/arch/arm/configs/spear320_defconfig
index 2ae3c11..842f7f3 100644
--- a/arch/arm/configs/spear320_defconfig
+++ b/arch/arm/configs/spear320_defconfig
@@ -1,775 +1,52 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32
-# Tue Mar 23 14:37:12 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
CONFIG_PLAT_SPEAR=y
-CONFIG_ARCH_SPEAR3XX=y
-# CONFIG_ARCH_SPEAR6XX is not set
-# CONFIG_MACH_SPEAR300 is not set
-# CONFIG_MACH_SPEAR310 is not set
CONFIG_MACH_SPEAR320=y
-# CONFIG_BOARD_SPEAR300_EVB is not set
-CONFIG_BOARD_SPEAR320_EVB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
CONFIG_GPIO_PL061=y
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_CPU_STALL_DETECTOR=y
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/spear600_defconfig b/arch/arm/configs/spear600_defconfig
index c85a029..6777c11 100644
--- a/arch/arm/configs/spear600_defconfig
+++ b/arch/arm/configs/spear600_defconfig
@@ -1,760 +1,49 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32
-# Tue Mar 23 14:37:26 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
CONFIG_PLAT_SPEAR=y
-# CONFIG_ARCH_SPEAR3XX is not set
CONFIG_ARCH_SPEAR6XX=y
-# CONFIG_MACH_SPEAR300 is not set
-# CONFIG_MACH_SPEAR310 is not set
-# CONFIG_MACH_SPEAR320 is not set
-# CONFIG_BOARD_SPEAR300_EVB is not set
-CONFIG_MACH_SPEAR600=y
-CONFIG_BOARD_SPEAR600_EVB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_R3964 is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
CONFIG_GPIO_PL061=y
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_CPU_STALL_DETECTOR=y
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index 7d89489..aebd4bb 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -1,539 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Mon Oct 20 10:25:37 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
CONFIG_PXA_SHARPSL=y
-# CONFIG_MACH_POODLE is not set
-# CONFIG_MACH_CORGI is not set
-# CONFIG_MACH_SHEPHERD is not set
-# CONFIG_MACH_HUSKY is not set
CONFIG_MACH_AKITA=y
-CONFIG_MACH_SPITZ=y
CONFIG_MACH_BORZOI=y
-# CONFIG_MACH_TOSA is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SHARP_Cxx00=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARPSL_PM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_AH is not set
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_TARGET_LOG is not set
CONFIG_IP6_NF_FILTER=m
-# CONFIG_IP6_NF_TARGET_REJECT is not set
CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
CONFIG_PXA_FICP=m
-# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@@ -543,18 +74,9 @@
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
@@ -563,774 +85,105 @@
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_SHARPSL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_CORGI is not set
-CONFIG_KEYBOARD_SPITZ=y
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_CORGI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-CONFIG_SENSORS_MAX1111=y
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_CORGI=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GYRATION=m
CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_MON=m
CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
@@ -1338,483 +191,85 @@
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
-# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGET is not set
CONFIG_USB_IDMOUSE=m
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/stamp9g20_defconfig b/arch/arm/configs/stamp9g20_defconfig
index 06a8293..d5e260b 100644
--- a/arch/arm/configs/stamp9g20_defconfig
+++ b/arch/arm/configs/stamp9g20_defconfig
@@ -1,1456 +1,129 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc1
-# Wed Mar 17 16:38:03 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
CONFIG_TREE_PREEMPT_RCU=y
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-CONFIG_HAVE_AT91_USART3=y
-CONFIG_HAVE_AT91_USART4=y
-CONFIG_HAVE_AT91_USART5=y
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9G10 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
CONFIG_ARCH_AT91SAM9G20=y
-# CONFIG_ARCH_AT91SAM9G45 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT572D940HF is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9G20 Board Type
-#
-# CONFIG_MACH_AT91SAM9G20EK is not set
-# CONFIG_MACH_AT91SAM9G20EK_2MMC is not set
-# CONFIG_MACH_CPU9G20 is not set
CONFIG_MACH_PORTUXG20=y
CONFIG_MACH_STAMP9G20=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
CONFIG_W1_MASTER_GPIO=y
-
-#
-# 1-wire Slaves
-#
CONFIG_W1_SLAVE_THERM=y
-# CONFIG_W1_SLAVE_SMEM is not set
CONFIG_W1_SLAVE_DS2431=y
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=m
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_MASS_STORAGE is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_AT91 is not set
CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_RTC_DRV_AT91SAM9_RTT=0
-CONFIG_RTC_DRV_AT91SAM9_GPBR=0
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/arm/configs/stmp378x_defconfig b/arch/arm/configs/stmp378x_defconfig
index b1a3a97..94a2d90 100644
--- a/arch/arm/configs/stmp378x_defconfig
+++ b/arch/arm/configs/stmp378x_defconfig
@@ -1,1140 +1,128 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Thu Apr 23 02:44:13 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-default"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
CONFIG_ARCH_STMP3XXX=y
-
-#
-# Freescale STMP3xxx implementations
-#
-# CONFIG_ARCH_STMP37XX is not set
CONFIG_ARCH_STMP378X=y
-# CONFIG_MACH_STMP37XX is not set
-CONFIG_MACH_STMP378X=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HIGHMEM=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-# CONFIG_VIDEO_V4L1_COMPAT is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-
-#
-# RDS decoders
-#
-
-#
-# Video decoders
-#
-
-#
-# Video and audio decoders
-#
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
+CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
-CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_SLAB_LEAK=y
-CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
-CONFIG_LOCKDEP=y
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
CONFIG_DEBUG_KOBJECT=y
-# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-CONFIG_FUNCTION_TRACER=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-CONFIG_CONTEXT_SWITCH_TRACER=y
-# CONFIG_EVENT_TRACER is not set
CONFIG_BOOT_TRACER=y
-# CONFIG_TRACE_BRANCH_PROFILING is not set
CONFIG_STACK_TRACER=y
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-# CONFIG_SECURITY_TOMOYO is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/stmp37xx_defconfig b/arch/arm/configs/stmp37xx_defconfig
index a3751c9..d8ee58c 100644
--- a/arch/arm/configs/stmp37xx_defconfig
+++ b/arch/arm/configs/stmp37xx_defconfig
@@ -1,1001 +1,108 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29.1
-# Mon Apr 20 04:41:26 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-default"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
CONFIG_ARCH_STMP3XXX=y
-
-#
-# Freescale STMP3xxx implementations
-#
-CONFIG_ARCH_STMP37XX=y
-# CONFIG_ARCH_STMP378X is not set
-CONFIG_MACH_STMP37XX=y
-# CONFIG_MACH_STMP378X is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M lcd_panel=lms350 rdinit=/bin/sh ignore_loglevel"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_STMP_DBG is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-# CONFIG_VIDEO_V4L1_COMPAT is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-
-#
-# Video decoders
-#
-
-#
-# Video and audio decoders
-#
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-
-#
-# Tracers
-#
-CONFIG_FUNCTION_TRACER=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_BOOT_TRACER=y
-# CONFIG_TRACE_BRANCH_PROFILING is not set
CONFIG_STACK_TRACER=y
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/sx1_defconfig b/arch/arm/configs/sx1_defconfig
index 8a9e7e6..20a8618 100644
--- a/arch/arm/configs/sx1_defconfig
+++ b/arch/arm/configs/sx1_defconfig
@@ -1,1117 +1,110 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc1-omap1
-# Thu Jun 7 05:16:10 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
CONFIG_SLOB=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-CONFIG_OMAP_GPIO_SWITCH=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MMU_FWK=y
CONFIG_OMAP_MBOX_FWK=y
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_LL_DEBUG_LCD is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_OMAP_DSP=y
-# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
-# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
-# CONFIG_OMAP_DSP_FBEXPORT is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
CONFIG_MACH_SX1=y
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=2
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
# CONFIG_HWMON is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
CONFIG_FB_OMAP_BOOTLOADER_INIT=y
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_CLEAN_4x6 is not set
-# CONFIG_FONT_CLEAN_5x8 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_OMAP_AIC23 is not set
-# CONFIG_SND_OMAP_TSC2101 is not set
-CONFIG_SND_SX1=y
-# CONFIG_SND_OMAP_TSC2102 is not set
-# CONFIG_SND_OMAP24XX_EAC is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_ETH=m
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
CONFIG_MMC_OMAP=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_OMAP=y
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
+CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=866
CONFIG_FAT_DEFAULT_IOCHARSET="koi8-r"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index dccf14b..e89ca19 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -1,883 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7-hammer
-# Thu Mar 27 16:39:48 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
CONFIG_SLOB=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_PLAT_S3C24XX=y
-# CONFIG_S3C2410_DMA is not set
-CONFIG_PLAT_S3C=y
-CONFIG_CPU_LLSERIAL_S3C2410_ONLY=y
-CONFIG_CPU_LLSERIAL_S3C2410=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-
-#
-# Power management
-#
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-
-#
-# S3C2400 Machines
-#
-CONFIG_CPU_S3C2410=y
-CONFIG_S3C2410_GPIO=y
-CONFIG_S3C2410_CLOCK=y
-
-#
-# S3C2410 Machines
-#
-# CONFIG_ARCH_SMDK2410 is not set
-# CONFIG_ARCH_H1940 is not set
-# CONFIG_MACH_N30 is not set
-# CONFIG_ARCH_BAST is not set
-# CONFIG_MACH_OTOM is not set
-# CONFIG_MACH_AML_M5900 is not set
CONFIG_MACH_TCT_HAMMER=y
-# CONFIG_MACH_VR1000 is not set
-# CONFIG_MACH_QT2410 is not set
-
-#
-# S3C2412 Machines
-#
-# CONFIG_MACH_SMDK2413 is not set
-# CONFIG_MACH_SMDK2412 is not set
-# CONFIG_MACH_VSTMS is not set
-
-#
-# S3C2440 Machines
-#
-# CONFIG_MACH_ANUBIS is not set
-# CONFIG_MACH_OSIRIS is not set
-# CONFIG_MACH_RX3715 is not set
-# CONFIG_ARCH_S3C2440 is not set
-# CONFIG_MACH_NEXCODER_2440 is not set
-
-#
-# S3C2442 Machines
-#
-
-#
-# S3C2443 Machines
-#
-# CONFIG_MACH_SMDK2443 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M root=/dev/ram0 init=/linuxrc rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=10240
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
# CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_S3C2410=y
-CONFIG_SERIAL_S3C2410_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
CONFIG_USB_GADGET_S3C2410=y
-CONFIG_USB_S3C2410=y
-# CONFIG_USB_S3C2410_DEBUG is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
+CONFIG_USB_ETH=m
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
# CONFIG_PROC_SYSCTL is not set
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index 1e8f5a2..37f4834 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -1,409 +1,53 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21
-# Mon Apr 30 21:23:20 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
CONFIG_TRIZEPS_PXA=y
CONFIG_MACH_TRIZEPS4=y
-CONFIG_MACH_TRIZEPS4_CONXS=y
-# CONFIG_MACH_TRIZEPS4_ANY is not set
-CONFIG_PXA27x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="root=fe01 console=ttyS0,38400n8 loglevel=5"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
CONFIG_IP_NF_QUEUE=m
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_PXA_FICP is not set
-# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@@ -413,370 +57,63 @@
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUSB is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
CONFIG_CFG80211=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
CONFIG_MTD_CFI_LE_BYTE_SWAP=y
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
CONFIG_MTD_DOC2000=y
CONFIG_MTD_DOC2001=y
CONFIG_MTD_DOC2001PLUS=y
-CONFIG_MTD_DOCPROBE=y
-CONFIG_MTD_DOCECC=y
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x4000000
CONFIG_MTD_DOCPROBE_HIGH=y
-# CONFIG_MTD_DOCPROBE_55AA is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
-# CONFIG_MTD_ONENAND_OTP is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_ESP_CORE is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PLATFORM=m
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
CONFIG_DM9000=y
-# CONFIG_SMC911X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-CONFIG_HERMES=y
-# CONFIG_ATMEL is not set
-CONFIG_PCMCIA_HERMES=y
-CONFIG_PCMCIA_SPECTRUM=y
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_USB_ZD1201 is not set
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_CS=y
-# CONFIG_ZD1211RW is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+CONFIG_HERMES=y
+CONFIG_PCMCIA_HERMES=y
+CONFIG_PCMCIA_SPECTRUM=y
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
@@ -785,920 +122,105 @@
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=640
-CONFIG_INPUT_TSDEV_SCREEN_Y=480
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_UCB1400=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_SA1100_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
CONFIG_I2C_PXA=y
CONFIG_I2C_PXA_SLAVE=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_WATCHDOG=y
+CONFIG_SA1100_WATCHDOG=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_SEQUENCER_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
-CONFIG_SND_DEBUG_DETECT=y
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=y
CONFIG_SND_PXA2XX_AC97=y
-
-#
-# USB devices
-#
CONFIG_SND_USB_AUDIO=m
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# SoC audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-
-#
-# MMC/SD Card support
-#
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
CONFIG_MMC_PXA=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
+CONFIG_NEW_LEDS=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
CONFIG_RTC_DRV_PCF8583=m
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V4=y
CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
-# CONFIG_SECURITY_ROOTPLUG is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
-CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 9155196..46e5e07 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,1225 +1,107 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Wed Jan 6 00:01:36 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_TCM=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
# CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
CONFIG_ARCH_U300=y
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# ST-Ericsson AB U300/U330/U335/U365 Platform
-#
-
-#
-# ST-Ericsson Mobile Platform Products
-#
CONFIG_MACH_U300=y
-
-#
-# ST-Ericsson U300/U330/U335/U365 Feature Selections
-#
-# CONFIG_MACH_U300_BS2X is not set
-# CONFIG_MACH_U300_BS330 is not set
CONFIG_MACH_U300_BS335=y
-# CONFIG_MACH_U300_BS365 is not set
-# CONFIG_MACH_U300_SINGLE_RAM is not set
CONFIG_MACH_U300_DUAL_RAM=y
CONFIG_U300_DEBUG=y
-# CONFIG_MACH_U300_SEMI_IS_SHARED is not set
CONFIG_MACH_U300_SPIDUMMY=y
-
-#
-# All the settings below must match the bootloader's settings
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-CONFIG_I2C_STU300=y
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-CONFIG_SPI_PL022=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_COH901327_WATCHDOG=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-CONFIG_AB3100_CORE=y
-CONFIG_AB3100_OTP=y
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-CONFIG_REGULATOR_AB3100=y
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
CONFIG_SND_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_ARMMMCI=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-CONFIG_RTC_DRV_AB3100=y
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
CONFIG_RTC_DRV_COH901331=y
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
CONFIG_COH901318=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 727aff9..be80f03 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -1,679 +1,58 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc8
-# Mon Nov 30 11:11:29 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_LOCKBREAK=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
CONFIG_ARCH_U8500=y
-CONFIG_PLAT_NOMADIK=y
-CONFIG_HAS_MTU=y
-
-#
-# ST-Ericsson platform type
-#
-
-#
-# ST-Ericsson Multicore Mobile Platforms
-#
-CONFIG_MACH_U8500_MOP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_GIC=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_NR_CPUS=2
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_LOCAL_TIMERS=y
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-CONFIG_VFPv3=y
CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
CONFIG_SPI_PL022=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
# CONFIG_MISC_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
index 87b700e..2e39f38 100644
--- a/arch/arm/configs/usb-a9260_defconfig
+++ b/arch/arm/configs/usb-a9260_defconfig
@@ -1,1141 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Apr 15 11:39:35 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
CONFIG_MACH_USB_A9260=y
-# CONFIG_MACH_QIL_A9260 is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_USB_ETH=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig
index 7f018ed..ee82d09 100644
--- a/arch/arm/configs/usb-a9263_defconfig
+++ b/arch/arm/configs/usb-a9263_defconfig
@@ -1,1133 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Apr 15 11:15:19 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
CONFIG_ARCH_AT91SAM9263=y
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9263 Board Type
-#
-# CONFIG_MACH_AT91SAM9263EK is not set
CONFIG_MACH_USB_A9263=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_USB_ETH=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index a1af0b9..0ce710f 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -1,1000 +1,84 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc3
-# Mon May 8 20:15:57 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_VERSATILE=y
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-
-#
-# Versatile platform type
-#
-CONFIG_ARCH_VERSATILE_PB=y
CONFIG_MACH_VERSATILE_AB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_VIC=y
-CONFIG_ICST307=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=1f03 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_ARM_INTEGRATOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
+CONFIG_EEPROM_LEGACY=m
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=m
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_FIRMWARE_EDID is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
CONFIG_FONT_ACORN_8x8=y
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
CONFIG_SND_ARMAACI=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
CONFIG_MMC_ARMMMCI=m
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
CONFIG_MINIX_FS=y
CONFIG_ROMFS_FS=y
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
index 909887a..9d7bf5e 100644
--- a/arch/arm/configs/viper_defconfig
+++ b/arch/arm/configs/viper_defconfig
@@ -1,1676 +1,174 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 17:12:07 2008
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=13
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
-CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
CONFIG_ARCH_VIPER=y
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-CONFIG_PXA_PWM=m
-CONFIG_PXA_HAVE_ISA_IRQS=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
CONFIG_PCMCIA_PXA2XX=m
-CONFIG_PCMCIA_PROBE=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
-# CONFIG_BT_SCO is not set
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-# CONFIG_BT_HCIBTUSB is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-CONFIG_MTD_SPARSE_RAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-# CONFIG_PATA_LEGACY is not set
CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_WINBOND_VLB is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=m
-# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
CONFIG_INPUT_MOUSEDEV=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_FUJITSU=m
-# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
-# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_HTCPEN=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
# CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=m
-# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=5
CONFIG_SERIAL_8250_RUNTIME_UARTS=5
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SA1100_WATCHDOG is not set
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=m
-# CONFIG_FB_PXA_SMARTPANEL is not set
CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_AM200EPD is not set
-# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-# CONFIG_BACKLIGHT_CORGI is not set
CONFIG_BACKLIGHT_PWM=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_PCM=m
CONFIG_SND_PXA2XX_AC97=m
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_PCMCIA=y
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_ISP116X_HCD=m
-# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_SL811_HCD=m
-# CONFIG_USB_SL811_CS is not set
CONFIG_USB_R8A66597_HCD=m
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA25X=y
-CONFIG_USB_PXA25X=m
-# CONFIG_USB_PXA25X_SMALL is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
CONFIG_USB_G_PRINTER=m
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
CONFIG_RTC_DRV_DS1307=m
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SA1100=m
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig
index 84a72ac..70d47db 100644
--- a/arch/arm/configs/xcep_defconfig
+++ b/arch/arm/configs/xcep_defconfig
@@ -1,1128 +1,99 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Thu Aug 20 09:02:37 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=".xcep-itech"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_STRIP_ASM_SYMS=y
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
CONFIG_SLOB=y
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLOCK is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_PXA_EZX is not set
CONFIG_MACH_XCEP=y
-CONFIG_PXA25x=y
-CONFIG_PXA_SSP=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=m
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=m
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_MAX6650=m
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_SA1100=m
-# CONFIG_RTC_DRV_PXA is not set
CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
# CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="utf8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
+CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
# CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig
index 3b627aa..30c537f 100644
--- a/arch/arm/configs/yl9200_defconfig
+++ b/arch/arm/configs/yl9200_defconfig
@@ -1,1215 +1,137 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Fri Jan 11 09:53:59 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
CONFIG_ARCH_AT91RM9200DK=y
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
CONFIG_MACH_YL9200=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=3
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
CONFIG_SPI_ATMEL=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_S1D135XX=y
-# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_M66592=y
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-CONFIG_USB_FILE_STORAGE=y
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_FILE_STORAGE=m
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
+CONFIG_MMC_AT91=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
CONFIG_RTC_DRV_AT91RM9200=y
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
CONFIG_SLUB_DEBUG_ON=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_DEBUG_KOBJECT=y
-CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_LIST=y
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
index fca5ff6..960f655 100644
--- a/arch/arm/configs/zeus_defconfig
+++ b/arch/arm/configs/zeus_defconfig
@@ -1,2031 +1,189 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32
-# Tue Dec 8 20:27:05 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_TINY_RCU=y
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=13
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Intel/Marvell Dev Platforms (sorted by hardware release time)
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_ZYLONITE300 is not set
-# CONFIG_MACH_ZYLONITE320 is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-
-#
-# Third Party Dev Platforms (sorted by vendor name)
-#
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_ARCH_VIPER is not set
CONFIG_MACH_ARCOM_ZEUS=y
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_MACH_XCEP is not set
-# CONFIG_TRIZEPS_PXA is not set
-CONFIG_ARCOM_PCMCIA=y
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-
-#
-# End-user Products (sorted by vendor name)
-#
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_PXA_EZX is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-CONFIG_PXA_HAVE_ISA_IRQS=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=m
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_SOC_COMMON=m
CONFIG_PCMCIA_PXA2XX=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA_PROBE=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
-
-#
-# Networking options
-#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
-# CONFIG_BT_SCO is not set
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
-# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
CONFIG_EEPROM_AT24=m
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-# CONFIG_PATA_LEGACY is not set
CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_WINBOND_VLB is not set
-# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DNET is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IWM is not set
-# CONFIG_LIBERTAS is not set
CONFIG_HERMES=m
-CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_P54_COMMON is not set
CONFIG_RT2X00=m
-# CONFIG_RT2500USB is not set
CONFIG_RT73USB=m
-# CONFIG_RT2800USB is not set
-CONFIG_RT2X00_LIB_USB=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-CONFIG_RT2X00_LIB_LEDS=y
-# CONFIG_RT2X00_DEBUG is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
-# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_ELO=m
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
-# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_HTCPEN=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_TOUCHSCREEN_TOUCHIT213=m
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=7
CONFIG_SERIAL_8250_RUNTIME_UARTS=7
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_PXA is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM75=m
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SA1100_WATCHDOG is not set
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=m
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_GENERIC=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
CONFIG_SND_PXA2XX_AC97=m
# CONFIG_SND_SPI is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_PCMCIA is not set
CONFIG_SND_SOC=m
CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=m
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
CONFIG_USB_G_PRINTER=m
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
CONFIG_RTC_DRV_ISL1208=m
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
CONFIG_RTC_DRV_PXA=m
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index a0162fa..7e79503 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -40,12 +40,12 @@
int result;
__asm__ __volatile__("@ atomic_add\n"
-"1: ldrex %0, [%2]\n"
-" add %0, %0, %3\n"
-" strex %1, %0, [%2]\n"
+"1: ldrex %0, [%3]\n"
+" add %0, %0, %4\n"
+" strex %1, %0, [%3]\n"
" teq %1, #0\n"
" bne 1b"
- : "=&r" (result), "=&r" (tmp)
+ : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
: "r" (&v->counter), "Ir" (i)
: "cc");
}
@@ -58,12 +58,12 @@
smp_mb();
__asm__ __volatile__("@ atomic_add_return\n"
-"1: ldrex %0, [%2]\n"
-" add %0, %0, %3\n"
-" strex %1, %0, [%2]\n"
+"1: ldrex %0, [%3]\n"
+" add %0, %0, %4\n"
+" strex %1, %0, [%3]\n"
" teq %1, #0\n"
" bne 1b"
- : "=&r" (result), "=&r" (tmp)
+ : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
: "r" (&v->counter), "Ir" (i)
: "cc");
@@ -78,12 +78,12 @@
int result;
__asm__ __volatile__("@ atomic_sub\n"
-"1: ldrex %0, [%2]\n"
-" sub %0, %0, %3\n"
-" strex %1, %0, [%2]\n"
+"1: ldrex %0, [%3]\n"
+" sub %0, %0, %4\n"
+" strex %1, %0, [%3]\n"
" teq %1, #0\n"
" bne 1b"
- : "=&r" (result), "=&r" (tmp)
+ : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
: "r" (&v->counter), "Ir" (i)
: "cc");
}
@@ -96,12 +96,12 @@
smp_mb();
__asm__ __volatile__("@ atomic_sub_return\n"
-"1: ldrex %0, [%2]\n"
-" sub %0, %0, %3\n"
-" strex %1, %0, [%2]\n"
+"1: ldrex %0, [%3]\n"
+" sub %0, %0, %4\n"
+" strex %1, %0, [%3]\n"
" teq %1, #0\n"
" bne 1b"
- : "=&r" (result), "=&r" (tmp)
+ : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
: "r" (&v->counter), "Ir" (i)
: "cc");
@@ -118,11 +118,11 @@
do {
__asm__ __volatile__("@ atomic_cmpxchg\n"
- "ldrex %1, [%2]\n"
+ "ldrex %1, [%3]\n"
"mov %0, #0\n"
- "teq %1, %3\n"
- "strexeq %0, %4, [%2]\n"
- : "=&r" (res), "=&r" (oldval)
+ "teq %1, %4\n"
+ "strexeq %0, %5, [%3]\n"
+ : "=&r" (res), "=&r" (oldval), "+Qo" (ptr->counter)
: "r" (&ptr->counter), "Ir" (old), "r" (new)
: "cc");
} while (res);
@@ -137,12 +137,12 @@
unsigned long tmp, tmp2;
__asm__ __volatile__("@ atomic_clear_mask\n"
-"1: ldrex %0, [%2]\n"
-" bic %0, %0, %3\n"
-" strex %1, %0, [%2]\n"
+"1: ldrex %0, [%3]\n"
+" bic %0, %0, %4\n"
+" strex %1, %0, [%3]\n"
" teq %1, #0\n"
" bne 1b"
- : "=&r" (tmp), "=&r" (tmp2)
+ : "=&r" (tmp), "=&r" (tmp2), "+Qo" (*addr)
: "r" (addr), "Ir" (mask)
: "cc");
}
@@ -249,7 +249,7 @@
__asm__ __volatile__("@ atomic64_read\n"
" ldrexd %0, %H0, [%1]"
: "=&r" (result)
- : "r" (&v->counter)
+ : "r" (&v->counter), "Qo" (v->counter)
);
return result;
@@ -260,11 +260,11 @@
u64 tmp;
__asm__ __volatile__("@ atomic64_set\n"
-"1: ldrexd %0, %H0, [%1]\n"
-" strexd %0, %2, %H2, [%1]\n"
+"1: ldrexd %0, %H0, [%2]\n"
+" strexd %0, %3, %H3, [%2]\n"
" teq %0, #0\n"
" bne 1b"
- : "=&r" (tmp)
+ : "=&r" (tmp), "=Qo" (v->counter)
: "r" (&v->counter), "r" (i)
: "cc");
}
@@ -275,13 +275,13 @@
unsigned long tmp;
__asm__ __volatile__("@ atomic64_add\n"
-"1: ldrexd %0, %H0, [%2]\n"
-" adds %0, %0, %3\n"
-" adc %H0, %H0, %H3\n"
-" strexd %1, %0, %H0, [%2]\n"
+"1: ldrexd %0, %H0, [%3]\n"
+" adds %0, %0, %4\n"
+" adc %H0, %H0, %H4\n"
+" strexd %1, %0, %H0, [%3]\n"
" teq %1, #0\n"
" bne 1b"
- : "=&r" (result), "=&r" (tmp)
+ : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
: "r" (&v->counter), "r" (i)
: "cc");
}
@@ -294,13 +294,13 @@
smp_mb();
__asm__ __volatile__("@ atomic64_add_return\n"
-"1: ldrexd %0, %H0, [%2]\n"
-" adds %0, %0, %3\n"
-" adc %H0, %H0, %H3\n"
-" strexd %1, %0, %H0, [%2]\n"
+"1: ldrexd %0, %H0, [%3]\n"
+" adds %0, %0, %4\n"
+" adc %H0, %H0, %H4\n"
+" strexd %1, %0, %H0, [%3]\n"
" teq %1, #0\n"
" bne 1b"
- : "=&r" (result), "=&r" (tmp)
+ : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
: "r" (&v->counter), "r" (i)
: "cc");
@@ -315,13 +315,13 @@
unsigned long tmp;
__asm__ __volatile__("@ atomic64_sub\n"
-"1: ldrexd %0, %H0, [%2]\n"
-" subs %0, %0, %3\n"
-" sbc %H0, %H0, %H3\n"
-" strexd %1, %0, %H0, [%2]\n"
+"1: ldrexd %0, %H0, [%3]\n"
+" subs %0, %0, %4\n"
+" sbc %H0, %H0, %H4\n"
+" strexd %1, %0, %H0, [%3]\n"
" teq %1, #0\n"
" bne 1b"
- : "=&r" (result), "=&r" (tmp)
+ : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
: "r" (&v->counter), "r" (i)
: "cc");
}
@@ -334,13 +334,13 @@
smp_mb();
__asm__ __volatile__("@ atomic64_sub_return\n"
-"1: ldrexd %0, %H0, [%2]\n"
-" subs %0, %0, %3\n"
-" sbc %H0, %H0, %H3\n"
-" strexd %1, %0, %H0, [%2]\n"
+"1: ldrexd %0, %H0, [%3]\n"
+" subs %0, %0, %4\n"
+" sbc %H0, %H0, %H4\n"
+" strexd %1, %0, %H0, [%3]\n"
" teq %1, #0\n"
" bne 1b"
- : "=&r" (result), "=&r" (tmp)
+ : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
: "r" (&v->counter), "r" (i)
: "cc");
@@ -358,12 +358,12 @@
do {
__asm__ __volatile__("@ atomic64_cmpxchg\n"
- "ldrexd %1, %H1, [%2]\n"
+ "ldrexd %1, %H1, [%3]\n"
"mov %0, #0\n"
- "teq %1, %3\n"
- "teqeq %H1, %H3\n"
- "strexdeq %0, %4, %H4, [%2]"
- : "=&r" (res), "=&r" (oldval)
+ "teq %1, %4\n"
+ "teqeq %H1, %H4\n"
+ "strexdeq %0, %5, %H5, [%3]"
+ : "=&r" (res), "=&r" (oldval), "+Qo" (ptr->counter)
: "r" (&ptr->counter), "r" (old), "r" (new)
: "cc");
} while (res);
@@ -381,11 +381,11 @@
smp_mb();
__asm__ __volatile__("@ atomic64_xchg\n"
-"1: ldrexd %0, %H0, [%2]\n"
-" strexd %1, %3, %H3, [%2]\n"
+"1: ldrexd %0, %H0, [%3]\n"
+" strexd %1, %4, %H4, [%3]\n"
" teq %1, #0\n"
" bne 1b"
- : "=&r" (result), "=&r" (tmp)
+ : "=&r" (result), "=&r" (tmp), "+Qo" (ptr->counter)
: "r" (&ptr->counter), "r" (new)
: "cc");
@@ -402,16 +402,16 @@
smp_mb();
__asm__ __volatile__("@ atomic64_dec_if_positive\n"
-"1: ldrexd %0, %H0, [%2]\n"
+"1: ldrexd %0, %H0, [%3]\n"
" subs %0, %0, #1\n"
" sbc %H0, %H0, #0\n"
" teq %H0, #0\n"
" bmi 2f\n"
-" strexd %1, %0, %H0, [%2]\n"
+" strexd %1, %0, %H0, [%3]\n"
" teq %1, #0\n"
" bne 1b\n"
"2:"
- : "=&r" (result), "=&r" (tmp)
+ : "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
: "r" (&v->counter)
: "cc");
@@ -429,18 +429,18 @@
smp_mb();
__asm__ __volatile__("@ atomic64_add_unless\n"
-"1: ldrexd %0, %H0, [%3]\n"
-" teq %0, %4\n"
-" teqeq %H0, %H4\n"
+"1: ldrexd %0, %H0, [%4]\n"
+" teq %0, %5\n"
+" teqeq %H0, %H5\n"
" moveq %1, #0\n"
" beq 2f\n"
-" adds %0, %0, %5\n"
-" adc %H0, %H0, %H5\n"
-" strexd %2, %0, %H0, [%3]\n"
+" adds %0, %0, %6\n"
+" adc %H0, %H0, %H6\n"
+" strexd %2, %0, %H0, [%4]\n"
" teq %2, #0\n"
" bne 1b\n"
"2:"
- : "=&r" (val), "=&r" (ret), "=&r" (tmp)
+ : "=&r" (val), "+r" (ret), "=&r" (tmp), "+Qo" (v->counter)
: "r" (&v->counter), "r" (u), "r" (a)
: "cc");
diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h
index f3eabf1..833306e 100644
--- a/arch/arm/include/asm/mach/udc_pxa2xx.h
+++ b/arch/arm/include/asm/mach/udc_pxa2xx.h
@@ -21,8 +21,8 @@
* here. Note that sometimes the signals go through inverters...
*/
bool gpio_vbus_inverted;
- u16 gpio_vbus; /* high == vbus present */
+ int gpio_vbus; /* high == vbus present */
bool gpio_pullup_inverted;
- u16 gpio_pullup; /* high == pullup activated */
+ int gpio_pullup; /* high == pullup activated */
};
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 6a89567..7bed3da 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -91,7 +91,11 @@
unsigned long get_wchan(struct task_struct *p);
+#if __LINUX_ARM_ARCH__ == 6
+#define cpu_relax() smp_mb()
+#else
#define cpu_relax() barrier()
+#endif
/*
* Create a new kernel thread
diff --git a/arch/arm/include/asm/scatterlist.h b/arch/arm/include/asm/scatterlist.h
index bcda59f..2f87870 100644
--- a/arch/arm/include/asm/scatterlist.h
+++ b/arch/arm/include/asm/scatterlist.h
@@ -3,9 +3,6 @@
#include <asm/memory.h>
#include <asm/types.h>
-
#include <asm-generic/scatterlist.h>
-#undef ARCH_HAS_SG_CHAIN
-
#endif /* _ASMARM_SCATTERLIST_H */
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 7ee48e7..3fd7861 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -162,8 +162,6 @@
@ r4 - orig_r0 (see pt_regs definition in ptrace.h)
@
stmia r5, {r0 - r4}
-
- asm_trace_hardirqs_off
.endm
.align 5
@@ -204,7 +202,7 @@
@
@ IRQs off again before pulling preserved data off the stack
@
- disable_irq
+ disable_irq_notrace
@
@ restore SPSR and restart the instruction
@@ -218,6 +216,9 @@
__irq_svc:
svc_entry
+#ifdef CONFIG_TRACE_IRQFLAGS
+ bl trace_hardirqs_off
+#endif
#ifdef CONFIG_PREEMPT
get_thread_info tsk
ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
@@ -291,7 +292,7 @@
@
@ IRQs off again before pulling preserved data off the stack
@
-1: disable_irq
+1: disable_irq_notrace
@
@ restore SPSR and restart the instruction
@@ -327,7 +328,7 @@
@
@ IRQs off again before pulling preserved data off the stack
@
- disable_irq
+ disable_irq_notrace
@
@ restore SPSR and restart the instruction
@@ -393,8 +394,6 @@
@ Clear FP to mark the first stack frame
@
zero_fp
-
- asm_trace_hardirqs_off
.endm
.macro kuser_cmpxchg_check
@@ -465,9 +464,6 @@
THUMB( movne r0, #0 )
THUMB( strne r0, [r0] )
#endif
-#ifdef CONFIG_TRACE_IRQFLAGS
- bl trace_hardirqs_on
-#endif
mov why, #0
b ret_to_user
diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
index da1f949..8bccbfa 100644
--- a/arch/arm/kernel/kprobes-decode.c
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -583,13 +583,14 @@
{
insn_llret_3arg_fn_t *i_fn = (insn_llret_3arg_fn_t *)&p->ainsn.insn[0];
kprobe_opcode_t insn = p->opcode;
+ long ppc = (long)p->addr + 8;
union reg_pair fnr;
int rd = (insn >> 12) & 0xf;
int rn = (insn >> 16) & 0xf;
int rm = insn & 0xf;
long rdv;
- long rnv = regs->uregs[rn];
- long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */
+ long rnv = (rn == 15) ? ppc : regs->uregs[rn];
+ long rmv = (rm == 15) ? ppc : regs->uregs[rm];
long cpsr = regs->ARM_cpsr;
fnr.dr = insnslot_llret_3arg_rflags(rnv, 0, rmv, cpsr, i_fn);
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index c457686..de12536 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -201,7 +201,7 @@
{
int shift = 64 - 32;
s64 prev_raw_count, new_raw_count;
- s64 delta;
+ u64 delta;
again:
prev_raw_count = atomic64_read(&hwc->prev_count);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index acf5e6f..a4a9cc8 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -351,17 +351,21 @@
/*
* Shuffle the argument into the correct register before calling the
- * thread function. r1 is the thread argument, r2 is the pointer to
- * the thread function, and r3 points to the exit function.
+ * thread function. r4 is the thread argument, r5 is the pointer to
+ * the thread function, and r6 points to the exit function.
*/
extern void kernel_thread_helper(void);
asm( ".pushsection .text\n"
" .align\n"
" .type kernel_thread_helper, #function\n"
"kernel_thread_helper:\n"
-" mov r0, r1\n"
-" mov lr, r3\n"
-" mov pc, r2\n"
+#ifdef CONFIG_TRACE_IRQFLAGS
+" bl trace_hardirqs_on\n"
+#endif
+" msr cpsr_c, r7\n"
+" mov r0, r4\n"
+" mov lr, r6\n"
+" mov pc, r5\n"
" .size kernel_thread_helper, . - kernel_thread_helper\n"
" .popsection");
@@ -391,11 +395,12 @@
memset(®s, 0, sizeof(regs));
- regs.ARM_r1 = (unsigned long)arg;
- regs.ARM_r2 = (unsigned long)fn;
- regs.ARM_r3 = (unsigned long)kernel_thread_exit;
+ regs.ARM_r4 = (unsigned long)arg;
+ regs.ARM_r5 = (unsigned long)fn;
+ regs.ARM_r6 = (unsigned long)kernel_thread_exit;
+ regs.ARM_r7 = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
regs.ARM_pc = (unsigned long)kernel_thread_helper;
- regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
+ regs.ARM_cpsr = regs.ARM_r7 | PSR_I_BIT;
return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, ®s, 0, NULL, NULL);
}
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index abd0493..2ec3095 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -17,6 +17,7 @@
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/i2c/pca953x.h>
+#include <linux/mfd/tps6507x.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
@@ -24,6 +25,8 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/regulator/machine.h>
+#include <linux/mfd/tps6507x.h>
+#include <linux/input/tps6507x-ts.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -533,10 +536,24 @@
},
};
+static struct touchscreen_init_data tps6507x_touchscreen_data = {
+ .poll_period = 30, /* ms between touch samples */
+ .min_pressure = 0x30, /* minimum pressure to trigger touch */
+ .vref = 0, /* turn off vref when not using A/D */
+ .vendor = 0, /* /sys/class/input/input?/id/vendor */
+ .product = 65070, /* /sys/class/input/input?/id/product */
+ .version = 0x100, /* /sys/class/input/input?/id/version */
+};
+
+static struct tps6507x_board tps_board = {
+ .tps6507x_pmic_init_data = &tps65070_regulator_data[0],
+ .tps6507x_ts_init_data = &tps6507x_touchscreen_data,
+};
+
static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
{
I2C_BOARD_INFO("tps6507x", 0x48),
- .platform_data = &tps65070_regulator_data[0],
+ .platform_data = &tps_board,
},
};
diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h
index 5a85e24..d4f1e96 100644
--- a/arch/arm/mach-davinci/include/mach/mmc.h
+++ b/arch/arm/mach-davinci/include/mach/mmc.h
@@ -22,6 +22,9 @@
/* Version of the MMC/SD controller */
u8 version;
+
+ /* Number of sg segments */
+ u8 nr_sg;
};
void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index d029d1f..02cae5e 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -17,6 +17,7 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/interrupt.h>
+#include <linux/completion.h>
#include <mach/dma.h>
#define MSM_DMOV_CHANNEL_COUNT 16
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index d3d5877..b2c7f51 100644
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -115,6 +115,8 @@
/* USB */
+#if defined(CONFIG_USB_ULPI)
+
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
@@ -244,10 +246,20 @@
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
-static struct platform_device *devices[] __initdata = {
- &smsc91x_device,
- &physmap_flash_device,
-};
+static void lilly1131_usb_init(void)
+{
+ usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+ mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+ mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+}
+
+#else
+static inline void lilly1131_usb_init(void) {}
+#endif /* CONFIG_USB_ULPI */
/* SPI */
@@ -279,6 +291,11 @@
.platform_data = &mc13783_pdata,
};
+static struct platform_device *devices[] __initdata = {
+ &smsc91x_device,
+ &physmap_flash_device,
+};
+
static int mx31lilly_baseboard;
core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
@@ -321,13 +338,7 @@
platform_add_devices(devices, ARRAY_SIZE(devices));
/* USB */
- usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
- usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
-
- mxc_register_device(&mxc_usbh1, &usbh1_pdata);
- mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+ lilly1131_usb_init();
}
static void __init mx31lilly_timer_init(void)
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index 33a8d35..62b5e40 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -220,11 +220,54 @@
},
};
+static struct mc13783_led_platform_data moboard_led[] = {
+ {
+ .id = MC13783_LED_R1,
+ .name = "coreboard-led-4:red",
+ .max_current = 2,
+ },
+ {
+ .id = MC13783_LED_G1,
+ .name = "coreboard-led-4:green",
+ .max_current = 2,
+ },
+ {
+ .id = MC13783_LED_B1,
+ .name = "coreboard-led-4:blue",
+ .max_current = 2,
+ },
+ {
+ .id = MC13783_LED_R2,
+ .name = "coreboard-led-5:red",
+ .max_current = 3,
+ },
+ {
+ .id = MC13783_LED_G2,
+ .name = "coreboard-led-5:green",
+ .max_current = 3,
+ },
+ {
+ .id = MC13783_LED_B2,
+ .name = "coreboard-led-5:blue",
+ .max_current = 3,
+ },
+};
+
+static struct mc13783_leds_platform_data moboard_leds = {
+ .num_leds = ARRAY_SIZE(moboard_led),
+ .led = moboard_led,
+ .flags = MC13783_LED_SLEWLIMTC,
+ .abmode = MC13783_LED_AB_DISABLED,
+ .tc1_period = MC13783_LED_PERIOD_10MS,
+ .tc2_period = MC13783_LED_PERIOD_10MS,
+};
+
static struct mc13783_platform_data moboard_pmic = {
.regulators = moboard_regulators,
.num_regulators = ARRAY_SIZE(moboard_regulators),
+ .leds = &moboard_leds,
.flags = MC13783_USE_REGULATOR | MC13783_USE_RTC |
- MC13783_USE_ADC,
+ MC13783_USE_ADC | MC13783_USE_LED,
};
static struct spi_board_info moboard_spi_board_info[] __initdata = {
diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c
index 2c471fc..f035f41 100644
--- a/arch/arm/mach-nomadik/clock.c
+++ b/arch/arm/mach-nomadik/clock.c
@@ -32,7 +32,10 @@
}
EXPORT_SYMBOL(clk_disable);
-/* We have a fixed clock alone, for now */
+static struct clk clk_24 = {
+ .rate = 2400000,
+};
+
static struct clk clk_48 = {
.rate = 48 * 1000 * 1000,
};
@@ -50,6 +53,8 @@
}
static struct clk_lookup lookups[] = {
+ CLK(&clk_24, "mtu0"),
+ CLK(&clk_24, "mtu1"),
CLK(&clk_48, "uart0"),
CLK(&clk_48, "uart1"),
CLK(&clk_default, "gpio.0"),
@@ -59,10 +64,8 @@
CLK(&clk_default, "rng"),
};
-static int __init clk_init(void)
+int __init clk_init(void)
{
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
return 0;
}
-
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h
index 5563985..78da2e7 100644
--- a/arch/arm/mach-nomadik/clock.h
+++ b/arch/arm/mach-nomadik/clock.h
@@ -11,3 +11,5 @@
struct clk {
unsigned long rate;
};
+
+int __init clk_init(void);
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 91c3c90..ac58e3b 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -31,6 +31,8 @@
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
+#include "clock.h"
+
#define __MEM_4K_RESOURCE(x) \
.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
@@ -143,6 +145,12 @@
/* This modified VIC cell has two register blocks, at 0 and 0x20 */
vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START + 0, ~0, 0);
vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0);
+
+ /*
+ * Init clocks here so that they are available for system timer
+ * initialization.
+ */
+ clk_init();
}
/*
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index e7d629b..f474a80 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -137,9 +137,7 @@
}
gpio_direction_input(ts_gpio);
-
- omap_set_gpio_debounce(ts_gpio, 1);
- omap_set_gpio_debounce_time(ts_gpio, 0xa);
+ gpio_set_debounce(ts_gpio, 310);
}
static int ads7846_get_pendown_state(void)
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 5fcb52e..fefd7e6 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -209,8 +209,7 @@
}
gpio_direction_input(ts_gpio);
- omap_set_gpio_debounce(ts_gpio, 1);
- omap_set_gpio_debounce_time(ts_gpio, 0xa);
+ gpio_set_debounce(ts_gpio, 310);
}
static int ads7846_get_pendown_state(void)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 81bba19..b952610 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -579,9 +579,7 @@
printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
gpio_direction_input(OMAP3_EVM_TS_GPIO);
-
- omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1);
- omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa);
+ gpio_set_debounce(OMAP3_EVM_TS_GPIO, 310);
}
static int ads7846_get_pendown_state(void)
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 395d049..db06dc9 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -130,8 +130,8 @@
static void __init pandora_keys_gpio_init(void)
{
/* set debounce time for GPIO banks 4 and 6 */
- omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME);
- omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
+ gpio_set_debounce(32 * 3, GPIO_DEBOUNCE_TIME);
+ gpio_set_debounce(32 * 5, GPIO_DEBOUNCE_TIME);
}
static int board_keymap[] = {
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index f848ba8..a04cffd 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -538,9 +538,7 @@
printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
gpio_direction_input(OMAP3_STALKER_TS_GPIO);
-
- omap_set_gpio_debounce(OMAP3_STALKER_TS_GPIO, 1);
- omap_set_gpio_debounce_time(OMAP3_STALKER_TS_GPIO, 0xa);
+ gpio_set_debounce(OMAP3_STALKER_TS_GPIO, 310);
}
static int ads7846_get_pendown_state(void)
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 2504d41..2f5f823 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -328,8 +328,7 @@
}
gpio_direction_input(OMAP3_TS_GPIO);
- omap_set_gpio_debounce(OMAP3_TS_GPIO, 1);
- omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa);
+ gpio_set_debounce(OMAP3_TS_GPIO, 310);
}
static struct ads7846_platform_data ads7846_config = {
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 0280422..e10db7a 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -1369,6 +1369,7 @@
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "l3_emif_clkdm",
.parent = &ddrphy_ck,
.recalc = &followparent_recalc,
@@ -1379,6 +1380,7 @@
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "l3_emif_clkdm",
.parent = &ddrphy_ck,
.recalc = &followparent_recalc,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 95c9a5f..b7a4133 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -409,10 +409,11 @@
return 0;
oh->_clk = omap_clk_get_by_name(oh->main_clk);
- if (!oh->_clk)
+ if (!oh->_clk) {
pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n",
oh->name, oh->main_clk);
return -EINVAL;
+ }
if (!oh->_clk->clkdm)
pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n",
@@ -444,10 +445,11 @@
continue;
c = omap_clk_get_by_name(os->clk);
- if (!c)
+ if (!c) {
pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
oh->name, os->clk);
ret = -EINVAL;
+ }
os->_clk = c;
}
@@ -470,10 +472,11 @@
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
c = omap_clk_get_by_name(oc->clk);
- if (!c)
+ if (!c) {
pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
oh->name, oc->clk);
ret = -EINVAL;
+ }
oc->_clk = c;
}
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 2e96771..b88737f 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -99,7 +99,7 @@
/* Do a readback to assure write has been done */
prm_read_mod_reg(WKUP_MOD, PM_WKEN);
- while (!(prm_read_mod_reg(WKUP_MOD, PM_WKST) &
+ while (!(prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
OMAP3430_ST_IO_CHAIN_MASK)) {
timeout++;
if (timeout > 1000) {
@@ -108,7 +108,7 @@
return;
}
prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
- WKUP_MOD, PM_WKST);
+ WKUP_MOD, PM_WKEN);
}
}
}
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
index c68f799..d72d1ac 100644
--- a/arch/arm/mach-omap2/usb-ehci.c
+++ b/arch/arm/mach-omap2/usb-ehci.c
@@ -20,6 +20,8 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+
#include <asm/io.h>
#include <plat/mux.h>
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 685f34a..fe0de16 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -240,22 +240,23 @@
#define ORION_BLINK_HALF_PERIOD 100 /* ms */
-static int dns323_gpio_blink_set(unsigned gpio,
+static int dns323_gpio_blink_set(unsigned gpio, int state,
unsigned long *delay_on, unsigned long *delay_off)
{
- static int value = 0;
- if (!*delay_on && !*delay_off)
+ if (delay_on && delay_off && !*delay_on && !*delay_off)
*delay_on = *delay_off = ORION_BLINK_HALF_PERIOD;
- if (ORION_BLINK_HALF_PERIOD == *delay_on
- && ORION_BLINK_HALF_PERIOD == *delay_off) {
- value = !value;
- orion_gpio_set_blink(gpio, value);
- return 0;
+ switch(state) {
+ case GPIO_LED_NO_BLINK_LOW:
+ case GPIO_LED_NO_BLINK_HIGH:
+ orion_gpio_set_blink(gpio, 0);
+ gpio_set_value(gpio, state);
+ break;
+ case GPIO_LED_BLINK:
+ orion_gpio_set_blink(gpio, 1);
}
-
- return -EINVAL;
+ return 0;
}
static struct gpio_led dns323_leds[] = {
@@ -263,6 +264,7 @@
.name = "power:blue",
.gpio = DNS323_GPIO_LED_POWER2,
.default_trigger = "timer",
+ .active_low = 1,
}, {
.name = "right:amber",
.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index d60db87..fa6a708 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -697,7 +697,7 @@
};
/* Board I2C devices. */
-static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
+static struct i2c_board_info mioa701_i2c_devices[] = {
{
I2C_BOARD_INFO("mt9m111", 0x5d),
},
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 033b567..ce1104d 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -263,11 +263,11 @@
.keymap_size = ARRAY_SIZE(palmtc_matrix_keys),
};
-const static unsigned int palmtc_keypad_row_gpios[] = {
+static const unsigned int palmtc_keypad_row_gpios[] = {
0, 9, 10, 11
};
-const static unsigned int palmtc_keypad_col_gpios[] = {
+static const unsigned int palmtc_keypad_col_gpios[] = {
18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
};
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 4d2413e..c1048a3 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -818,6 +818,9 @@
.type = "max7310",
.addr = 0x18,
.platform_data = &akita_ioexp,
+ }, {
+ .type = "wm8750",
+ .addr = 0x1b,
},
};
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index f5d1ae3..d303c69 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -3,8 +3,9 @@
*
* Support for the Zipit Z2 Handheld device.
*
- * Author: Ken McGuire
- * Created: Jan 25, 2009
+ * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on research and code by: Ken McGuire
* Based on mainstone.c as modified for the Zipit Z2.
*
* This program is free software; you can redistribute it and/or modify
@@ -157,21 +158,14 @@
{
.name = "U-Boot Bootloader",
.offset = 0x0,
- .size = 0x20000,
- },
- {
- .name = "Linux Kernel",
- .offset = 0x20000,
- .size = 0x220000,
- },
- {
- .name = "Filesystem",
- .offset = 0x240000,
- .size = 0x5b0000,
- },
- {
+ .size = 0x40000,
+ }, {
.name = "U-Boot Environment",
- .offset = 0x7f0000,
+ .offset = 0x40000,
+ .size = 0x60000,
+ }, {
+ .name = "Flash",
+ .offset = 0x60000,
.size = MTDPART_SIZ_FULL,
},
};
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index ee5e392..b4575ae 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -18,6 +18,7 @@
bool "Support ARM11MPCore tile"
depends on MACH_REALVIEW_EB
select CPU_V6
+ select ARCH_HAS_BARRIERS if SMP
help
Enable support for the ARM11MPCore tile on the Realview platform.
@@ -35,6 +36,7 @@
select CPU_V6
select ARM_GIC
select HAVE_PATA_PLATFORM
+ select ARCH_HAS_BARRIERS if SMP
help
Include support for the ARM(R) RealView MPCore Platform Baseboard.
PB11MPCore is a platform with an on-board ARM11MPCore and has
diff --git a/arch/arm/mach-realview/include/mach/barriers.h b/arch/arm/mach-realview/include/mach/barriers.h
new file mode 100644
index 0000000..0c5d749
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/barriers.h
@@ -0,0 +1,8 @@
+/*
+ * Barriers redefined for RealView ARM11MPCore platforms with L220 cache
+ * controller to work around hardware errata causing the outer_sync()
+ * operation to deadlock the system.
+ */
+#define mb() dsb()
+#define rmb() dmb()
+#define wmb() mb()
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 422ccd7..4425018 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -32,6 +32,7 @@
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pmu.h>
+#include <asm/pgtable.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/localtimer.h>
@@ -457,7 +458,7 @@
MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .phys_io = REALVIEW_EB_UART0_BASE,
+ .phys_io = REALVIEW_EB_UART0_BASE & SECTION_MASK,
.io_pg_offst = (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x00000100,
.fixup = realview_fixup,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 96568eb..099a1f1 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -32,6 +32,7 @@
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pmu.h>
+#include <asm/pgtable.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
@@ -351,7 +352,7 @@
MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .phys_io = REALVIEW_PB1176_UART0_BASE,
+ .phys_io = REALVIEW_PB1176_UART0_BASE & SECTION_MASK,
.io_pg_offst = (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x00000100,
.fixup = realview_pb1176_fixup,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 7fbefbb..0e07a5c 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -32,6 +32,7 @@
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pmu.h>
+#include <asm/pgtable.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/localtimer.h>
@@ -373,7 +374,7 @@
MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .phys_io = REALVIEW_PB11MP_UART0_BASE,
+ .phys_io = REALVIEW_PB11MP_UART0_BASE & SECTION_MASK,
.io_pg_offst = (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x00000100,
.fixup = realview_fixup,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index d3c113b..ac2f06f 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -31,6 +31,7 @@
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pmu.h>
+#include <asm/pgtable.h>
#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
@@ -323,7 +324,7 @@
MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .phys_io = REALVIEW_PBA8_UART0_BASE,
+ .phys_io = REALVIEW_PBA8_UART0_BASE & SECTION_MASK,
.io_pg_offst = (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x00000100,
.fixup = realview_fixup,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index a235ba3..08fd683 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -31,6 +31,7 @@
#include <asm/mach-types.h>
#include <asm/pmu.h>
#include <asm/smp_twd.h>
+#include <asm/pgtable.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
@@ -409,7 +410,7 @@
MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .phys_io = REALVIEW_PBX_UART0_BASE,
+ .phys_io = REALVIEW_PBX_UART0_BASE & SECTION_MASK,
.io_pg_offst = (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x00000100,
.fixup = realview_pbx_fixup,
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 45799c6..9e39faa 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -49,7 +49,6 @@
#include <linux/io.h>
#include <linux/i2c.h>
-#include <linux/backlight.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/pcf50633/core.h>
@@ -57,6 +56,7 @@
#include <linux/mfd/pcf50633/adc.h>
#include <linux/mfd/pcf50633/gpio.h>
#include <linux/mfd/pcf50633/pmic.h>
+#include <linux/mfd/pcf50633/backlight.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -254,6 +254,12 @@
"battery",
};
+static struct pcf50633_bl_platform_data gta02_backlight_data = {
+ .default_brightness = 0x3f,
+ .default_brightness_limit = 0,
+ .ramp_time = 5,
+};
+
struct pcf50633_platform_data gta02_pcf_pdata = {
.resumers = {
[0] = PCF50633_INT1_USBINS |
@@ -271,6 +277,8 @@
.charger_reference_current_ma = 1000,
+ .backlight_data = >a02_backlight_data,
+
.reg_init_data = {
[PCF50633_REGULATOR_AUTO] = {
.constraints = {
@@ -478,71 +486,6 @@
};
-
-
-static void gta02_bl_set_intensity(int intensity)
-{
- struct pcf50633 *pcf = gta02_pcf;
- int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
-
- /* We map 8-bit intensity to 6-bit intensity in hardware. */
- intensity >>= 2;
-
- /*
- * This can happen during, eg, print of panic on blanked console,
- * but we can't service i2c without interrupts active, so abort.
- */
- if (in_atomic()) {
- printk(KERN_ERR "gta02_bl_set_intensity called while atomic\n");
- return;
- }
-
- old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
- if (intensity == old_intensity)
- return;
-
- /* We can't do this anywhere else. */
- pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5);
-
- if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3))
- old_intensity = 0;
-
- /*
- * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
- * if seen, you have to re-enable the LED unit.
- */
- if (!intensity || !old_intensity)
- pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0);
-
- /* Illegal to set LEDOUT to 0. */
- if (!intensity)
- pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, 2);
- else
- pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
- intensity);
-
- if (intensity)
- pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2);
-
-}
-
-static struct generic_bl_info gta02_bl_info = {
- .name = "gta02-bl",
- .max_intensity = 0xff,
- .default_intensity = 0xff,
- .set_bl_intensity = gta02_bl_set_intensity,
-};
-
-static struct platform_device gta02_bl_dev = {
- .name = "generic-bl",
- .id = 1,
- .dev = {
- .platform_data = >a02_bl_info,
- },
-};
-
-
-
/* USB */
static struct s3c2410_hcd_info gta02_usb_info __initdata = {
.port[0] = {
@@ -579,7 +522,6 @@
/* These guys DO need to be children of PMU. */
static struct platform_device *gta02_devices_pmu_children[] = {
- >a02_bl_dev,
};
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 7a4138b..fbd85a9 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -259,6 +259,12 @@
.enable = s3c64xx_hclk_ctrl,
.ctrlbit = S3C_CLKCON_HCLK_HSMMC2,
}, {
+ .name = "otg",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_USB,
+ }, {
.name = "timers",
.id = -1,
.parent = &clk_p,
diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p6440/include/mach/irqs.h
index a4b9b40..911854d 100644
--- a/arch/arm/mach-s5p6440/include/mach/irqs.h
+++ b/arch/arm/mach-s5p6440/include/mach/irqs.h
@@ -72,7 +72,14 @@
#define S5P_IRQ_EINT_BASE (S5P_IRQ_VIC1(31) + 6)
#define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE)
-#define IRQ_EINT(x) S5P_EINT(x)
+
+#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE)
+/*
+ * S5P6440 has 0-15 external interrupts in group 0. Only these can be used
+ * to wake up from sleep. If request is beyond this range, by mistake, a large
+ * return value for an irq number should be indication of something amiss.
+ */
+#define S5P_EINT_BASE2 (0xf0000000)
/*
* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c
index 3aadbf4..087e57f 100644
--- a/arch/arm/mach-s5p6442/clock.c
+++ b/arch/arm/mach-s5p6442/clock.c
@@ -294,7 +294,7 @@
mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
- printk(KERN_INFO "S5P6440: PLL settings, A=%ld, M=%ld, E=%ld",
+ printk(KERN_INFO "S5P6442: PLL settings, A=%ld, M=%ld, E=%ld",
apll, mpll, epll);
clk_fout_apll.rate = apll;
diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h
index da66580..02c2374 100644
--- a/arch/arm/mach-s5p6442/include/mach/irqs.h
+++ b/arch/arm/mach-s5p6442/include/mach/irqs.h
@@ -77,8 +77,9 @@
#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1)
-#define IRQ_EINT(x) ((x) < 16 ? S5P_IRQ_VIC0(x) : \
- (S5P_IRQ_EINT_BASE + (x)-16))
+#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
+#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE)
+
/* Set the default NR_IRQS */
#define NR_IRQS (IRQ_EINT(31) + 1)
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index 15066df..28aa551 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -100,9 +100,6 @@
#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
-#define IRQ_EINT(x) ((x) < 16 ? S5P_IRQ_VIC0(x) : \
- (S5P_EINT_BASE2 + (x) - 16))
-
#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1)
#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x))
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
index 763edebd..dd6295e 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
@@ -60,12 +60,9 @@
#define S5PC100EINT30PEND (S5P_VA_GPIO + 0xF40)
#define S5P_EINT_PEND(x) (S5PC100EINT30PEND + ((x) * 0x4))
-#define eint_offset(irq) ((irq) < IRQ_EINT16_31 ? ((irq) - IRQ_EINT(0)) : \
- (((irq) - S5P_EINT_BASE2)))
+#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
-#define EINT_REG_NR(x) (eint_offset(x) >> 3)
-
-#define eint_irq_to_bit(irq) (1 << (eint_offset(irq) & 0x7))
+#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
/* values for S5P_EXTINT0 */
#define S5P_EXTINT_LOWLEV (0x00)
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 154bca4..af91fef 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -183,6 +183,11 @@
return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable);
}
+static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
+}
+
static struct clk clk_sclk_hdmi27m = {
.name = "sclk_hdmi27m",
.id = -1,
@@ -406,14 +411,14 @@
.id = 0,
.parent = &clk_p,
.enable = s5pv210_clk_ip3_ctrl,
- .ctrlbit = (1<<4),
+ .ctrlbit = (1 << 5),
}, {
.name = "i2s_v32",
.id = 1,
.parent = &clk_p,
.enable = s5pv210_clk_ip3_ctrl,
- .ctrlbit = (1<<4),
- }
+ .ctrlbit = (1 << 6),
+ },
};
static struct clk init_clocks[] = {
@@ -429,25 +434,25 @@
.id = 0,
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
- .ctrlbit = (1<<7),
+ .ctrlbit = (1 << 17),
}, {
.name = "uart",
.id = 1,
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
- .ctrlbit = (1<<8),
+ .ctrlbit = (1 << 18),
}, {
.name = "uart",
.id = 2,
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
- .ctrlbit = (1<<9),
+ .ctrlbit = (1 << 19),
}, {
.name = "uart",
.id = 3,
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
- .ctrlbit = (1<<10),
+ .ctrlbit = (1 << 20),
},
};
@@ -497,8 +502,8 @@
.clk = {
.name = "sclk_dac",
.id = -1,
- .ctrlbit = (1 << 10),
- .enable = s5pv210_clk_ip1_ctrl,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 2),
},
.sources = &clkset_sclk_dac,
.reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 1 },
@@ -527,8 +532,8 @@
.clk = {
.name = "sclk_hdmi",
.id = -1,
- .enable = s5pv210_clk_ip1_ctrl,
- .ctrlbit = (1 << 11),
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 0),
},
.sources = &clkset_sclk_hdmi,
.reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
@@ -565,8 +570,8 @@
.clk = {
.name = "sclk_audio",
.id = 0,
- .enable = s5pv210_clk_ip3_ctrl,
- .ctrlbit = (1 << 4),
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 24),
},
.sources = &clkset_sclk_audio0,
.reg_src = { .reg = S5P_CLK_SRC6, .shift = 0, .size = 4 },
@@ -594,8 +599,8 @@
.clk = {
.name = "sclk_audio",
.id = 1,
- .enable = s5pv210_clk_ip3_ctrl,
- .ctrlbit = (1 << 5),
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 25),
},
.sources = &clkset_sclk_audio1,
.reg_src = { .reg = S5P_CLK_SRC6, .shift = 4, .size = 4 },
@@ -623,8 +628,8 @@
.clk = {
.name = "sclk_audio",
.id = 2,
- .enable = s5pv210_clk_ip3_ctrl,
- .ctrlbit = (1 << 6),
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 26),
},
.sources = &clkset_sclk_audio2,
.reg_src = { .reg = S5P_CLK_SRC6, .shift = 8, .size = 4 },
@@ -680,8 +685,8 @@
.clk = {
.name = "uclk1",
.id = 0,
- .ctrlbit = (1<<17),
- .enable = s5pv210_clk_ip3_ctrl,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 12),
},
.sources = &clkset_uart,
.reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 },
@@ -690,8 +695,8 @@
.clk = {
.name = "uclk1",
.id = 1,
- .enable = s5pv210_clk_ip3_ctrl,
- .ctrlbit = (1 << 18),
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 13),
},
.sources = &clkset_uart,
.reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 },
@@ -700,8 +705,8 @@
.clk = {
.name = "uclk1",
.id = 2,
- .enable = s5pv210_clk_ip3_ctrl,
- .ctrlbit = (1 << 19),
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 14),
},
.sources = &clkset_uart,
.reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 },
@@ -710,8 +715,8 @@
.clk = {
.name = "uclk1",
.id = 3,
- .enable = s5pv210_clk_ip3_ctrl,
- .ctrlbit = (1 << 20),
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 15),
},
.sources = &clkset_uart,
.reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 },
@@ -720,8 +725,8 @@
.clk = {
.name = "sclk_mixer",
.id = -1,
- .enable = s5pv210_clk_ip1_ctrl,
- .ctrlbit = (1 << 9),
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 1),
},
.sources = &clkset_sclk_mixer,
.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
@@ -738,8 +743,8 @@
.clk = {
.name = "sclk_fimc",
.id = 0,
- .enable = s5pv210_clk_ip0_ctrl,
- .ctrlbit = (1 << 24),
+ .enable = s5pv210_clk_mask1_ctrl,
+ .ctrlbit = (1 << 2),
},
.sources = &clkset_group2,
.reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 4 },
@@ -748,8 +753,8 @@
.clk = {
.name = "sclk_fimc",
.id = 1,
- .enable = s5pv210_clk_ip0_ctrl,
- .ctrlbit = (1 << 25),
+ .enable = s5pv210_clk_mask1_ctrl,
+ .ctrlbit = (1 << 3),
},
.sources = &clkset_group2,
.reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 4 },
@@ -758,8 +763,8 @@
.clk = {
.name = "sclk_fimc",
.id = 2,
- .enable = s5pv210_clk_ip0_ctrl,
- .ctrlbit = (1 << 26),
+ .enable = s5pv210_clk_mask1_ctrl,
+ .ctrlbit = (1 << 4),
},
.sources = &clkset_group2,
.reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 4 },
@@ -768,6 +773,8 @@
.clk = {
.name = "sclk_cam",
.id = 0,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 3),
},
.sources = &clkset_group2,
.reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 4 },
@@ -776,6 +783,8 @@
.clk = {
.name = "sclk_cam",
.id = 1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 4),
},
.sources = &clkset_group2,
.reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 4 },
@@ -784,8 +793,8 @@
.clk = {
.name = "sclk_fimd",
.id = -1,
- .enable = s5pv210_clk_ip1_ctrl,
- .ctrlbit = (1 << 0),
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 5),
},
.sources = &clkset_group2,
.reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 4 },
@@ -794,8 +803,8 @@
.clk = {
.name = "sclk_mmc",
.id = 0,
- .enable = s5pv210_clk_ip2_ctrl,
- .ctrlbit = (1 << 16),
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 8),
},
.sources = &clkset_group2,
.reg_src = { .reg = S5P_CLK_SRC4, .shift = 0, .size = 4 },
@@ -804,8 +813,8 @@
.clk = {
.name = "sclk_mmc",
.id = 1,
- .enable = s5pv210_clk_ip2_ctrl,
- .ctrlbit = (1 << 17),
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 9),
},
.sources = &clkset_group2,
.reg_src = { .reg = S5P_CLK_SRC4, .shift = 4, .size = 4 },
@@ -814,8 +823,8 @@
.clk = {
.name = "sclk_mmc",
.id = 2,
- .enable = s5pv210_clk_ip2_ctrl,
- .ctrlbit = (1 << 18),
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 10),
},
.sources = &clkset_group2,
.reg_src = { .reg = S5P_CLK_SRC4, .shift = 8, .size = 4 },
@@ -824,8 +833,8 @@
.clk = {
.name = "sclk_mmc",
.id = 3,
- .enable = s5pv210_clk_ip2_ctrl,
- .ctrlbit = (1 << 19),
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 11),
},
.sources = &clkset_group2,
.reg_src = { .reg = S5P_CLK_SRC4, .shift = 12, .size = 4 },
@@ -864,8 +873,8 @@
.clk = {
.name = "sclk_csis",
.id = -1,
- .enable = s5pv210_clk_ip0_ctrl,
- .ctrlbit = (1 << 31),
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 6),
},
.sources = &clkset_group2,
.reg_src = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 4 },
@@ -874,8 +883,8 @@
.clk = {
.name = "sclk_spi",
.id = 0,
- .enable = s5pv210_clk_ip3_ctrl,
- .ctrlbit = (1 << 12),
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 16),
},
.sources = &clkset_group2,
.reg_src = { .reg = S5P_CLK_SRC5, .shift = 0, .size = 4 },
@@ -884,8 +893,8 @@
.clk = {
.name = "sclk_spi",
.id = 1,
- .enable = s5pv210_clk_ip3_ctrl,
- .ctrlbit = (1 << 13),
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 17),
},
.sources = &clkset_group2,
.reg_src = { .reg = S5P_CLK_SRC5, .shift = 4, .size = 4 },
@@ -894,8 +903,8 @@
.clk = {
.name = "sclk_pwi",
.id = -1,
- .enable = &s5pv210_clk_ip4_ctrl,
- .ctrlbit = (1 << 2),
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 29),
},
.sources = &clkset_group2,
.reg_src = { .reg = S5P_CLK_SRC6, .shift = 20, .size = 4 },
@@ -904,8 +913,8 @@
.clk = {
.name = "sclk_pwm",
.id = -1,
- .enable = s5pv210_clk_ip3_ctrl,
- .ctrlbit = (1 << 23),
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 19),
},
.sources = &clkset_group2,
.reg_src = { .reg = S5P_CLK_SRC5, .shift = 12, .size = 4 },
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index 92fc6c7..9689537 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -118,22 +118,12 @@
#define IRQ_MDNIE3 S5P_IRQ_VIC3(8)
#define IRQ_VIC_END S5P_IRQ_VIC3(31)
-#define S5P_EINT_16_31_BASE (IRQ_VIC_END + 1)
-
-#define EINT_MODE S3C_GPIO_SFN(0xf)
-
-#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_IRQ_VIC0(0)) \
- : ((x) + S5P_EINT_16_31_BASE))
+#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
+#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
/* Set the default NR_IRQS */
-
#define NR_IRQS (IRQ_EINT(31) + 1)
-#define EINT_GPIO_0(x) S5PV210_GPH0(x)
-#define EINT_GPIO_1(x) S5PV210_GPH1(x)
-#define EINT_GPIO_2(x) S5PV210_GPH2(x)
-#define EINT_GPIO_3(x) S5PV210_GPH3(x)
-
/* Compatibility */
#define IRQ_LCD_FIFO IRQ_LCD0
#define IRQ_LCD_VSYNC IRQ_LCD1
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
index 6d06809..49e029b 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
@@ -27,12 +27,9 @@
#define S5PV210_EINT30PEND (S5P_VA_GPIO + 0xF40)
#define S5P_EINT_PEND(x) (S5PV210_EINT30PEND + ((x) * 0x4))
-#define eint_offset(irq) ((irq) < IRQ_EINT16_31 ? ((irq) - IRQ_EINT(0)) \
- : ((irq) - S5P_EINT_16_31_BASE))
+#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
-#define EINT_REG_NR(x) (eint_offset(x) >> 3)
-
-#define eint_irq_to_bit(irq) (1 << (eint_offset(irq) & 0x7))
+#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
/* values for S5P_EXTINT0 */
#define S5P_EXTINT_LOWLEV (0x00)
@@ -41,4 +38,11 @@
#define S5P_EXTINT_RISEEDGE (0x03)
#define S5P_EXTINT_BOTHEDGE (0x04)
+#define EINT_MODE S3C_GPIO_SFN(0xf)
+
+#define EINT_GPIO_0(x) S5PV210_GPH0(x)
+#define EINT_GPIO_1(x) S5PV210_GPH1(x)
+#define EINT_GPIO_2(x) S5PV210_GPH2(x)
+#define EINT_GPIO_3(x) S5PV210_GPH3(x)
+
#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index c73ed06..f0394ba 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -9,7 +9,7 @@
*/
#include <linux/kernel.h>
#include <linux/i2c.h>
-#include <linux/mfd/ab3100.h>
+#include <linux/mfd/abx500.h>
#include <linux/regulator/machine.h>
#include <linux/amba/bus.h>
#include <mach/irqs.h>
@@ -46,6 +46,7 @@
/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
#define BUCK_SLEEP_SETTING 0xAC
+#ifdef CONFIG_AB3100_CORE
static struct regulator_consumer_supply supply_ldo_c[] = {
{
.dev_name = "ab3100-codec",
@@ -253,14 +254,68 @@
LDO_D_SETTING,
},
};
+#endif
+
+#ifdef CONFIG_AB3550_CORE
+static struct abx500_init_settings ab3550_init_settings[] = {
+ {
+ .bank = 0,
+ .reg = AB3550_IMR1,
+ .setting = 0xff
+ },
+ {
+ .bank = 0,
+ .reg = AB3550_IMR2,
+ .setting = 0xff
+ },
+ {
+ .bank = 0,
+ .reg = AB3550_IMR3,
+ .setting = 0xff
+ },
+ {
+ .bank = 0,
+ .reg = AB3550_IMR4,
+ .setting = 0xff
+ },
+ {
+ .bank = 0,
+ .reg = AB3550_IMR5,
+ /* The two most significant bits are not used */
+ .setting = 0x3f
+ },
+};
+
+static struct ab3550_platform_data ab3550_plf_data = {
+ .irq = {
+ .base = IRQ_AB3550_BASE,
+ .count = (IRQ_AB3550_END - IRQ_AB3550_BASE + 1),
+ },
+ .dev_data = {
+ },
+ .init_settings = ab3550_init_settings,
+ .init_settings_sz = ARRAY_SIZE(ab3550_init_settings),
+};
+#endif
static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
+#if defined(CONFIG_AB3550_CORE)
+ {
+ .type = "ab3550",
+ .addr = 0x4A,
+ .irq = IRQ_U300_IRQ0_EXT,
+ .platform_data = &ab3550_plf_data,
+ },
+#elif defined(CONFIG_AB3100_CORE)
{
.type = "ab3100",
.addr = 0x48,
.irq = IRQ_U300_IRQ0_EXT,
.platform_data = &ab3100_plf_data,
},
+#else
+ { },
+#endif
};
static struct i2c_board_info __initdata bus1_i2c_board_info[] = {
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index a6867b1..09b1b28 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -109,6 +109,13 @@
#define U300_NR_IRQS 48
#endif
+#ifdef CONFIG_AB3550_CORE
+#define IRQ_AB3550_BASE (U300_NR_IRQS)
+#define IRQ_AB3550_END (IRQ_AB3550_BASE + 37)
+
+#define NR_IRQS (IRQ_AB3550_END + 1)
+#else
#define NR_IRQS U300_NR_IRQS
+#endif
#endif
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index c7bc419..4556aea 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -7,4 +7,5 @@
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o
obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o
obj-$(CONFIG_MACH_U5500) += board-u5500.o
-obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 072196c..bb8d7b7 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -50,7 +50,7 @@
static struct spi_board_info u8500_spi_devices[] = {
{
- .modalias = "ab4500",
+ .modalias = "ab8500",
.controller_data = &ab4500_chip_info,
.max_speed_hz = 12000000,
.bus_num = 0,
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 1b2c989..0a1318f 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -16,6 +16,7 @@
#include <asm/clkdev.h>
+#include <plat/mtu.h>
#include <mach/hardware.h>
#include "clock.h"
@@ -59,6 +60,9 @@
#define PRCM_DMACLK_MGT 0x074
#define PRCM_B2R2CLK_MGT 0x078
#define PRCM_TVCLK_MGT 0x07C
+#define PRCM_TCR 0x1C8
+#define PRCM_TCR_STOPPED (1 << 16)
+#define PRCM_TCR_DOZE_MODE (1 << 17)
#define PRCM_UNIPROCLK_MGT 0x278
#define PRCM_SSPCLK_MGT 0x280
#define PRCM_RNGCLK_MGT 0x284
@@ -120,10 +124,95 @@
}
EXPORT_SYMBOL(clk_disable);
+/*
+ * The MTU has a separate, rather complex muxing setup
+ * with alternative parents (peripheral cluster or
+ * ULP or fixed 32768 Hz) depending on settings
+ */
+static unsigned long clk_mtu_get_rate(struct clk *clk)
+{
+ void __iomem *addr = __io_address(UX500_PRCMU_BASE)
+ + PRCM_TCR;
+ u32 tcr = readl(addr);
+ int mtu = (int) clk->data;
+ /*
+ * One of these is selected eventually
+ * TODO: Replace the constant with a reference
+ * to the ULP source once this is modeled.
+ */
+ unsigned long clk32k = 32768;
+ unsigned long mturate;
+ unsigned long retclk;
+
+ /* Get the rate from the parent as a default */
+ if (clk->parent_periph)
+ mturate = clk_get_rate(clk->parent_periph);
+ else if (clk->parent_cluster)
+ mturate = clk_get_rate(clk->parent_cluster);
+ else
+ /* We need to be connected SOMEWHERE */
+ BUG();
+
+ /*
+ * Are we in doze mode?
+ * In this mode the parent peripheral or the fixed 32768 Hz
+ * clock is fed into the block.
+ */
+ if (!(tcr & PRCM_TCR_DOZE_MODE)) {
+ /*
+ * Here we're using the clock input from the APE ULP
+ * clock domain. But first: are the timers stopped?
+ */
+ if (tcr & PRCM_TCR_STOPPED) {
+ clk32k = 0;
+ mturate = 0;
+ } else {
+ /* Else default mode: 0 and 2.4 MHz */
+ clk32k = 0;
+ if (cpu_is_u5500())
+ /* DB5500 divides by 8 */
+ mturate /= 8;
+ else if (cpu_is_u8500ed()) {
+ /*
+ * This clocking setting must not be used
+ * in the ED chip, it is simply not
+ * connected anywhere!
+ */
+ mturate = 0;
+ BUG();
+ } else
+ /*
+ * In this mode the ulp38m4 clock is divided
+ * by a factor 16, on the DB8500 typically
+ * 38400000 / 16 ~ 2.4 MHz.
+ * TODO: Replace the constant with a reference
+ * to the ULP source once this is modeled.
+ */
+ mturate = 38400000 / 16;
+ }
+ }
+
+ /* Return the clock selected for this MTU */
+ if (tcr & (1 << mtu))
+ retclk = clk32k;
+ else
+ retclk = mturate;
+
+ pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk);
+ return retclk;
+}
+
unsigned long clk_get_rate(struct clk *clk)
{
unsigned long rate;
+ /*
+ * If there is a custom getrate callback for this clock,
+ * it will take precedence.
+ */
+ if (clk->get_rate)
+ return clk->get_rate(clk);
+
if (clk->ops && clk->ops->get_rate)
return clk->ops->get_rate(clk);
@@ -341,8 +430,9 @@
/* Peripheral Cluster #6 */
-static DEFINE_PRCC_CLK(6, mtu1_v1, 8, -1, NULL);
-static DEFINE_PRCC_CLK(6, mtu0_v1, 7, -1, NULL);
+/* MTU ID in data */
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu1_v1, 8, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu0_v1, 7, -1, NULL, clk_mtu_get_rate, 0);
static DEFINE_PRCC_CLK(6, cfgreg_v1, 6, 6, NULL);
static DEFINE_PRCC_CLK(6, dmc_ed, 6, 6, NULL);
static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL);
@@ -357,8 +447,9 @@
/* Peripheral Cluster #7 */
static DEFINE_PRCC_CLK(7, tzpc0_ed, 4, -1, NULL);
-static DEFINE_PRCC_CLK(7, mtu1_ed, 3, -1, NULL);
-static DEFINE_PRCC_CLK(7, mtu0_ed, 2, -1, NULL);
+/* MTU ID in data */
+static DEFINE_PRCC_CLK_CUSTOM(7, mtu1_ed, 3, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(7, mtu0_ed, 2, -1, NULL, clk_mtu_get_rate, 0);
static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL);
static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL);
@@ -411,7 +502,7 @@
CLK(apetraceclk, "apetrace", NULL),
CLK(mcdeclk, "mcde", NULL),
CLK(ipi2clk, "ipi2", NULL),
- CLK(dmaclk, "dma40", NULL),
+ CLK(dmaclk, "dma40.0", NULL),
CLK(b2r2clk, "b2r2", NULL),
CLK(tvclk, "tv", NULL),
};
@@ -503,15 +594,17 @@
CLK(uiccclk, "uicc", NULL),
};
-static int __init clk_init(void)
+int __init clk_init(void)
{
if (cpu_is_u8500ed()) {
clk_prcmu_ops.enable = clk_prcmu_ed_enable;
clk_prcmu_ops.disable = clk_prcmu_ed_disable;
+ clk_per6clk.rate = 100000000;
} else if (cpu_is_u5500()) {
/* Clock tree for U5500 not implemented yet */
clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
+ clk_per6clk.rate = 26000000;
}
clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
@@ -522,4 +615,3 @@
return 0;
}
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h
index e4f99b6..a058025 100644
--- a/arch/arm/mach-ux500/clock.h
+++ b/arch/arm/mach-ux500/clock.h
@@ -28,6 +28,9 @@
* @ops: pointer to clkops struct used to control this clock
* @name: name, for debugging
* @enabled: refcount. positive if enabled, zero if disabled
+ * @get_rate: custom callback for getting the clock rate
+ * @data: custom per-clock data for example for the get_rate
+ * callback
* @rate: fixed rate for clocks which don't implement
* ops->getrate
* @prcmu_cg_off: address offset of the combined enable/disable register
@@ -67,6 +70,8 @@
const struct clkops *ops;
const char *name;
unsigned int enabled;
+ unsigned long (*get_rate)(struct clk *);
+ void *data;
unsigned long rate;
struct list_head list;
@@ -117,9 +122,26 @@
.parent_periph = _kernclk \
}
+#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \
+struct clk clk_##_name = { \
+ .name = #_name, \
+ .ops = &clk_prcc_ops, \
+ .cluster = _pclust, \
+ .prcc_bus = _bus_en, \
+ .prcc_kernel = _kernel_en, \
+ .parent_cluster = &clk_per##_pclust##clk, \
+ .parent_periph = _kernclk, \
+ .get_rate = _callback, \
+ .data = (void *) _data \
+ }
+
+
#define CLK(_clk, _devname, _conname) \
{ \
.clk = &clk_##_clk, \
.dev_id = _devname, \
.con_id = _conname, \
}
+
+int __init clk_db8500_ed_fixup(void);
+int __init clk_init(void);
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 6a3ac45..e9278f6 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -21,6 +21,7 @@
__IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K),
};
static struct platform_device *u5500_platform_devs[] __initdata = {
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index d04299f..f21c444 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -32,6 +32,7 @@
&u8500_gpio_devs[6],
&u8500_gpio_devs[7],
&u8500_gpio_devs[8],
+ &u8500_dma40_device,
};
/* minimum static i/o mapping required to boot U8500 platforms */
@@ -71,6 +72,9 @@
{
ux500_init_devices();
+ if (cpu_is_u8500ed())
+ dma40_u8500ed_fixup();
+
/* Register the platform devices */
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index d81ad02..e0fd747 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -62,6 +62,12 @@
{
gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29);
gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
+
+ /*
+ * Init clocks here so that they are available for system timer
+ * initialization.
+ */
+ clk_init();
}
#ifdef CONFIG_CACHE_L2X0
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 2033423..8229034 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -12,9 +12,13 @@
#include <linux/gpio.h>
#include <linux/amba/bus.h>
+#include <plat/ste_dma40.h>
+
#include <mach/hardware.h>
#include <mach/setup.h>
+#include "ste-dma40-db8500.h"
+
static struct nmk_gpio_platform_data u8500_gpio_data[] = {
GPIO_DATA("GPIO-0-31", 0),
GPIO_DATA("GPIO-32-63", 32), /* 37..63 not routed to pin */
@@ -105,3 +109,108 @@
.resource = u8500_i2c4_resources,
.num_resources = ARRAY_SIZE(u8500_i2c4_resources),
};
+
+static struct resource dma40_resources[] = {
+ [0] = {
+ .start = U8500_DMA_BASE,
+ .end = U8500_DMA_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "base",
+ },
+ [1] = {
+ .start = U8500_DMA_LCPA_BASE,
+ .end = U8500_DMA_LCPA_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "lcpa",
+ },
+ [2] = {
+ .start = U8500_DMA_LCLA_BASE,
+ .end = U8500_DMA_LCLA_BASE + 16 * 1024 - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "lcla",
+ },
+ [3] = {
+ .start = IRQ_DMA,
+ .end = IRQ_DMA,
+ .flags = IORESOURCE_IRQ}
+};
+
+/* Default configuration for physcial memcpy */
+struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
+ .channel_type = (STEDMA40_CHANNEL_IN_PHY_MODE |
+ STEDMA40_LOW_PRIORITY_CHANNEL |
+ STEDMA40_PCHAN_BASIC_MODE),
+ .dir = STEDMA40_MEM_TO_MEM,
+
+ .src_info.endianess = STEDMA40_LITTLE_ENDIAN,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .src_info.psize = STEDMA40_PSIZE_PHY_1,
+
+ .dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.psize = STEDMA40_PSIZE_PHY_1,
+
+};
+/* Default configuration for logical memcpy */
+struct stedma40_chan_cfg dma40_memcpy_conf_log = {
+ .channel_type = (STEDMA40_CHANNEL_IN_LOG_MODE |
+ STEDMA40_LOW_PRIORITY_CHANNEL |
+ STEDMA40_LCHAN_SRC_LOG_DST_LOG |
+ STEDMA40_NO_TIM_FOR_LINK),
+ .dir = STEDMA40_MEM_TO_MEM,
+
+ .src_info.endianess = STEDMA40_LITTLE_ENDIAN,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .src_info.psize = STEDMA40_PSIZE_LOG_1,
+
+ .dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_1,
+
+};
+
+/*
+ * Mapping between destination event lines and physical device address.
+ * The event line is tied to a device and therefor the address is constant.
+ */
+static const dma_addr_t dma40_tx_map[STEDMA40_NR_DEV];
+
+/* Mapping between source event lines and physical device address */
+static const dma_addr_t dma40_rx_map[STEDMA40_NR_DEV];
+
+/* Reserved event lines for memcpy only */
+static int dma40_memcpy_event[] = {
+ STEDMA40_MEMCPY_TX_1,
+ STEDMA40_MEMCPY_TX_2,
+ STEDMA40_MEMCPY_TX_3,
+ STEDMA40_MEMCPY_TX_4,
+};
+
+static struct stedma40_platform_data dma40_plat_data = {
+ .dev_len = STEDMA40_NR_DEV,
+ .dev_rx = dma40_rx_map,
+ .dev_tx = dma40_tx_map,
+ .memcpy = dma40_memcpy_event,
+ .memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
+ .memcpy_conf_phy = &dma40_memcpy_conf_phy,
+ .memcpy_conf_log = &dma40_memcpy_conf_log,
+ .llis_per_log = 8,
+};
+
+struct platform_device u8500_dma40_device = {
+ .dev = {
+ .platform_data = &dma40_plat_data,
+ },
+ .name = "dma40",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dma40_resources),
+ .resource = dma40_resources
+};
+
+void dma40_u8500ed_fixup(void)
+{
+ dma40_plat_data.memcpy = NULL;
+ dma40_plat_data.memcpy_len = 0;
+ dma40_resources[0].start = U8500_DMA_BASE_ED;
+ dma40_resources[0].end = U8500_DMA_BASE_ED + SZ_4K - 1;
+}
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 9169e1e..85fc6a8 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -7,6 +7,18 @@
#ifndef __MACH_DB8500_REGS_H
#define __MACH_DB8500_REGS_H
+/* Base address and bank offsets for ESRAM */
+#define U8500_ESRAM_BASE 0x40000000
+#define U8500_ESRAM_BANK_SIZE 0x00020000
+#define U8500_ESRAM_BANK0 U8500_ESRAM_BASE
+#define U8500_ESRAM_BANK1 (U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK2 (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK3 (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK4 (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE)
+/* Use bank 4 for DMA LCLA and LCPA */
+#define U8500_DMA_LCLA_BASE U8500_ESRAM_BANK4
+#define U8500_DMA_LCPA_BASE (U8500_ESRAM_BANK4 + 0x4000)
+
#define U8500_PER3_BASE 0x80000000
#define U8500_STM_BASE 0x80100000
#define U8500_STM_REG_BASE (U8500_STM_BASE + 0xF000)
diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h
index 0422af0..c2b2f25 100644
--- a/arch/arm/mach-ux500/include/mach/devices.h
+++ b/arch/arm/mach-ux500/include/mach/devices.h
@@ -25,5 +25,8 @@
extern struct platform_device u8500_i2c0_device;
extern struct platform_device u8500_i2c4_device;
+extern struct platform_device u8500_dma40_device;
+
+void dma40_u8500ed_fixup(void);
#endif
diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h
new file mode 100644
index 0000000..e701627
--- /dev/null
+++ b/arch/arm/mach-ux500/ste-dma40-db8500.h
@@ -0,0 +1,154 @@
+/*
+ * arch/arm/mach-ux500/ste_dma40_db8500.h
+ * DB8500-SoC-specific configuration for DMA40
+ *
+ * Copyright (C) ST-Ericsson 2007-2010
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Per Friden <per.friden@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#ifndef STE_DMA40_DB8500_H
+#define STE_DMA40_DB8500_H
+
+#define STEDMA40_NR_DEV 64
+
+enum dma_src_dev_type {
+ STEDMA40_DEV_SPI0_RX = 0,
+ STEDMA40_DEV_SD_MMC0_RX = 1,
+ STEDMA40_DEV_SD_MMC1_RX = 2,
+ STEDMA40_DEV_SD_MMC2_RX = 3,
+ STEDMA40_DEV_I2C1_RX = 4,
+ STEDMA40_DEV_I2C3_RX = 5,
+ STEDMA40_DEV_I2C2_RX = 6,
+ STEDMA40_DEV_I2C4_RX = 7, /* Only on V1 */
+ STEDMA40_DEV_SSP0_RX = 8,
+ STEDMA40_DEV_SSP1_RX = 9,
+ STEDMA40_DEV_MCDE_RX = 10,
+ STEDMA40_DEV_UART2_RX = 11,
+ STEDMA40_DEV_UART1_RX = 12,
+ STEDMA40_DEV_UART0_RX = 13,
+ STEDMA40_DEV_MSP2_RX = 14,
+ STEDMA40_DEV_I2C0_RX = 15,
+ STEDMA40_DEV_USB_OTG_IEP_8 = 16,
+ STEDMA40_DEV_USB_OTG_IEP_1_9 = 17,
+ STEDMA40_DEV_USB_OTG_IEP_2_10 = 18,
+ STEDMA40_DEV_USB_OTG_IEP_3_11 = 19,
+ STEDMA40_DEV_SLIM0_CH0_RX_HSI_RX_CH0 = 20,
+ STEDMA40_DEV_SLIM0_CH1_RX_HSI_RX_CH1 = 21,
+ STEDMA40_DEV_SLIM0_CH2_RX_HSI_RX_CH2 = 22,
+ STEDMA40_DEV_SLIM0_CH3_RX_HSI_RX_CH3 = 23,
+ STEDMA40_DEV_SRC_SXA0_RX_TX = 24,
+ STEDMA40_DEV_SRC_SXA1_RX_TX = 25,
+ STEDMA40_DEV_SRC_SXA2_RX_TX = 26,
+ STEDMA40_DEV_SRC_SXA3_RX_TX = 27,
+ STEDMA40_DEV_SD_MM2_RX = 28,
+ STEDMA40_DEV_SD_MM0_RX = 29,
+ STEDMA40_DEV_MSP1_RX = 30,
+ /*
+ * This channel is either SlimBus or MSP,
+ * never both at the same time.
+ */
+ STEDMA40_SLIM0_CH0_RX = 31,
+ STEDMA40_DEV_MSP0_RX = 31,
+ STEDMA40_DEV_SD_MM1_RX = 32,
+ STEDMA40_DEV_SPI2_RX = 33,
+ STEDMA40_DEV_I2C3_RX2 = 34,
+ STEDMA40_DEV_SPI1_RX = 35,
+ STEDMA40_DEV_USB_OTG_IEP_4_12 = 36,
+ STEDMA40_DEV_USB_OTG_IEP_5_13 = 37,
+ STEDMA40_DEV_USB_OTG_IEP_6_14 = 38,
+ STEDMA40_DEV_USB_OTG_IEP_7_15 = 39,
+ STEDMA40_DEV_SPI3_RX = 40,
+ STEDMA40_DEV_SD_MM3_RX = 41,
+ STEDMA40_DEV_SD_MM4_RX = 42,
+ STEDMA40_DEV_SD_MM5_RX = 43,
+ STEDMA40_DEV_SRC_SXA4_RX_TX = 44,
+ STEDMA40_DEV_SRC_SXA5_RX_TX = 45,
+ STEDMA40_DEV_SRC_SXA6_RX_TX = 46,
+ STEDMA40_DEV_SRC_SXA7_RX_TX = 47,
+ STEDMA40_DEV_CAC1_RX = 48,
+ /* RX channels 49 and 50 are unused */
+ STEDMA40_DEV_MSHC_RX = 51,
+ STEDMA40_DEV_SLIM1_CH0_RX_HSI_RX_CH4 = 52,
+ STEDMA40_DEV_SLIM1_CH1_RX_HSI_RX_CH5 = 53,
+ STEDMA40_DEV_SLIM1_CH2_RX_HSI_RX_CH6 = 54,
+ STEDMA40_DEV_SLIM1_CH3_RX_HSI_RX_CH7 = 55,
+ /* RX channels 56 thru 60 are unused */
+ STEDMA40_DEV_CAC0_RX = 61,
+ /* RX channels 62 and 63 are unused */
+};
+
+enum dma_dest_dev_type {
+ STEDMA40_DEV_SPI0_TX = 0,
+ STEDMA40_DEV_SD_MMC0_TX = 1,
+ STEDMA40_DEV_SD_MMC1_TX = 2,
+ STEDMA40_DEV_SD_MMC2_TX = 3,
+ STEDMA40_DEV_I2C1_TX = 4,
+ STEDMA40_DEV_I2C3_TX = 5,
+ STEDMA40_DEV_I2C2_TX = 6,
+ STEDMA50_DEV_I2C4_TX = 7, /* Only on V1 */
+ STEDMA40_DEV_SSP0_TX = 8,
+ STEDMA40_DEV_SSP1_TX = 9,
+ /* TX channel 10 is unused */
+ STEDMA40_DEV_UART2_TX = 11,
+ STEDMA40_DEV_UART1_TX = 12,
+ STEDMA40_DEV_UART0_TX= 13,
+ STEDMA40_DEV_MSP2_TX = 14,
+ STEDMA40_DEV_I2C0_TX = 15,
+ STEDMA40_DEV_USB_OTG_OEP_8 = 16,
+ STEDMA40_DEV_USB_OTG_OEP_1_9 = 17,
+ STEDMA40_DEV_USB_OTG_OEP_2_10= 18,
+ STEDMA40_DEV_USB_OTG_OEP_3_11 = 19,
+ STEDMA40_DEV_SLIM0_CH0_TX_HSI_TX_CH0 = 20,
+ STEDMA40_DEV_SLIM0_CH1_TX_HSI_TX_CH1 = 21,
+ STEDMA40_DEV_SLIM0_CH2_TX_HSI_TX_CH2 = 22,
+ STEDMA40_DEV_SLIM0_CH3_TX_HSI_TX_CH3 = 23,
+ STEDMA40_DEV_DST_SXA0_RX_TX = 24,
+ STEDMA40_DEV_DST_SXA1_RX_TX = 25,
+ STEDMA40_DEV_DST_SXA2_RX_TX = 26,
+ STEDMA40_DEV_DST_SXA3_RX_TX = 27,
+ STEDMA40_DEV_SD_MM2_TX = 28,
+ STEDMA40_DEV_SD_MM0_TX = 29,
+ STEDMA40_DEV_MSP1_TX = 30,
+ /*
+ * This channel is either SlimBus or MSP,
+ * never both at the same time.
+ */
+ STEDMA40_SLIM0_CH0_TX = 31,
+ STEDMA40_DEV_MSP0_TX = 31,
+ STEDMA40_DEV_SD_MM1_TX = 32,
+ STEDMA40_DEV_SPI2_TX = 33,
+ /* Secondary I2C3 channel */
+ STEDMA40_DEV_I2C3_TX2 = 34,
+ STEDMA40_DEV_SPI1_TX = 35,
+ STEDMA40_DEV_USB_OTG_OEP_4_12 = 36,
+ STEDMA40_DEV_USB_OTG_OEP_5_13 = 37,
+ STEDMA40_DEV_USB_OTG_OEP_6_14 = 38,
+ STEDMA40_DEV_USB_OTG_OEP_7_15 = 39,
+ STEDMA40_DEV_SPI3_TX = 40,
+ STEDMA40_DEV_SD_MM3_TX = 41,
+ STEDMA40_DEV_SD_MM4_TX = 42,
+ STEDMA40_DEV_SD_MM5_TX = 43,
+ STEDMA40_DEV_DST_SXA4_RX_TX = 44,
+ STEDMA40_DEV_DST_SXA5_RX_TX = 45,
+ STEDMA40_DEV_DST_SXA6_RX_TX = 46,
+ STEDMA40_DEV_DST_SXA7_RX_TX = 47,
+ STEDMA40_DEV_CAC1_TX = 48,
+ STEDMA40_DEV_CAC1_TX_HAC1_TX = 49,
+ STEDMA40_DEV_HAC1_TX = 50,
+ STEDMA40_MEMXCPY_TX_0 = 51,
+ STEDMA40_DEV_SLIM1_CH0_TX_HSI_TX_CH4 = 52,
+ STEDMA40_DEV_SLIM1_CH1_TX_HSI_TX_CH5 = 53,
+ STEDMA40_DEV_SLIM1_CH2_TX_HSI_TX_CH6 = 54,
+ STEDMA40_DEV_SLIM1_CH3_TX_HSI_TX_CH7 = 55,
+ STEDMA40_MEMCPY_TX_1 = 56,
+ STEDMA40_MEMCPY_TX_2 = 57,
+ STEDMA40_MEMCPY_TX_3 = 58,
+ STEDMA40_MEMCPY_TX_4 = 59,
+ STEDMA40_MEMCPY_TX_5 = 60,
+ STEDMA40_DEV_CAC0_TX = 61,
+ STEDMA40_DEV_CAC0_TX_HAC0_TX = 62,
+ STEDMA40_DEV_HAC0_TX = 63,
+};
+
+#endif
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index e6f7303..6353459 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -2,6 +2,7 @@
* Versatile Express Core Tile Cortex A9x4 Support
*/
#include <linux/init.h>
+#include <linux/gfp.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
@@ -9,6 +10,7 @@
#include <linux/amba/clcd.h>
#include <asm/clkdev.h>
+#include <asm/pgtable.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
@@ -235,7 +237,7 @@
}
MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4")
- .phys_io = V2M_UART0,
+ .phys_io = V2M_UART0 & SECTION_MASK,
.io_pg_offst = (__MMIO_P2V(V2M_UART0) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x00000100,
.map_io = ct_ca9x4_map_io,
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 346ae14..101105e 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -735,6 +735,25 @@
Forget about fast user space cmpxchg support.
It is just not possible.
+config DMA_CACHE_RWFO
+ bool "Enable read/write for ownership DMA cache maintenance"
+ depends on CPU_V6 && SMP
+ default y
+ help
+ The Snoop Control Unit on ARM11MPCore does not detect the
+ cache maintenance operations and the dma_{map,unmap}_area()
+ functions may leave stale cache entries on other CPUs. By
+ enabling this option, Read or Write For Ownership in the ARMv6
+ DMA cache maintenance functions is performed. These LDR/STR
+ instructions change the cache line state to shared or modified
+ so that the cache operation has the desired effect.
+
+ Note that the workaround is only valid on processors that do
+ not perform speculative loads into the D-cache. For such
+ processors, if cache maintenance operations are not broadcast
+ in hardware, other workarounds are needed (e.g. cache
+ maintenance broadcasting in software via FIQ).
+
config OUTER_CACHE
bool
@@ -794,6 +813,8 @@
config ARM_DMA_MEM_BUFFERABLE
bool "Use non-cacheable memory for DMA" if CPU_V6 && !CPU_V7
+ depends on !(MACH_REALVIEW_PB1176 || REALVIEW_EB_ARM11MP || \
+ MACH_REALVIEW_PB11MP)
default y if CPU_V6 || CPU_V7
help
Historically, the kernel has used strongly ordered mappings to
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 9819869..df49558 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -218,6 +218,9 @@
cache_id = readl(l2x0_base + L2X0_CACHE_ID);
aux = readl(l2x0_base + L2X0_AUX_CTRL);
+ aux &= aux_mask;
+ aux |= aux_val;
+
/* Determine the number of ways */
switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
case L2X0_CACHE_ID_PART_L310:
@@ -248,8 +251,6 @@
if (!(readl(l2x0_base + L2X0_CTRL) & 1)) {
/* l2x0 controller is disabled */
- aux &= aux_mask;
- aux |= aux_val;
writel(aux, l2x0_base + L2X0_AUX_CTRL);
l2x0_inv_all();
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index e46ecd8..86aa689 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -211,8 +211,9 @@
mcrne p15, 0, r1, c7, c15, 1 @ clean & invalidate unified line
#endif
1:
-#ifdef CONFIG_SMP
- str r0, [r0] @ write for ownership
+#ifdef CONFIG_DMA_CACHE_RWFO
+ ldr r2, [r0] @ read for ownership
+ str r2, [r0] @ write for ownership
#endif
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c6, 1 @ invalidate D line
@@ -234,7 +235,7 @@
v6_dma_clean_range:
bic r0, r0, #D_CACHE_LINE_SIZE - 1
1:
-#ifdef CONFIG_SMP
+#ifdef CONFIG_DMA_CACHE_RWFO
ldr r2, [r0] @ read for ownership
#endif
#ifdef HARVARD_CACHE
@@ -257,7 +258,7 @@
ENTRY(v6_dma_flush_range)
bic r0, r0, #D_CACHE_LINE_SIZE - 1
1:
-#ifdef CONFIG_SMP
+#ifdef CONFIG_DMA_CACHE_RWFO
ldr r2, [r0] @ read for ownership
str r2, [r0] @ write for ownership
#endif
@@ -283,9 +284,13 @@
add r1, r1, r0
teq r2, #DMA_FROM_DEVICE
beq v6_dma_inv_range
+#ifndef CONFIG_DMA_CACHE_RWFO
+ b v6_dma_clean_range
+#else
teq r2, #DMA_TO_DEVICE
beq v6_dma_clean_range
b v6_dma_flush_range
+#endif
ENDPROC(v6_dma_map_area)
/*
@@ -295,6 +300,11 @@
* - dir - DMA direction
*/
ENTRY(v6_dma_unmap_area)
+#ifndef CONFIG_DMA_CACHE_RWFO
+ add r1, r1, r0
+ teq r2, #DMA_TO_DEVICE
+ bne v6_dma_inv_range
+#endif
mov pc, lr
ENDPROC(v6_dma_unmap_area)
diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c
index 5eb4fd9..ac163de 100644
--- a/arch/arm/mm/copypage-feroceon.c
+++ b/arch/arm/mm/copypage-feroceon.c
@@ -18,7 +18,7 @@
{
asm("\
stmfd sp!, {r4-r9, lr} \n\
- mov ip, %0 \n\
+ mov ip, %2 \n\
1: mov lr, r1 \n\
ldmia r1!, {r2 - r9} \n\
pld [lr, #32] \n\
@@ -64,7 +64,7 @@
mcr p15, 0, ip, c7, c10, 4 @ drain WB\n\
ldmfd sp!, {r4-r9, pc}"
:
- : "I" (PAGE_SIZE));
+ : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE));
}
void feroceon_copy_user_highpage(struct page *to, struct page *from,
diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c
index 7c2eb55..cb589cb 100644
--- a/arch/arm/mm/copypage-v4wb.c
+++ b/arch/arm/mm/copypage-v4wb.c
@@ -27,7 +27,7 @@
{
asm("\
stmfd sp!, {r4, lr} @ 2\n\
- mov r2, %0 @ 1\n\
+ mov r2, %2 @ 1\n\
ldmia r1!, {r3, r4, ip, lr} @ 4\n\
1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\
stmia r0!, {r3, r4, ip, lr} @ 4\n\
@@ -44,7 +44,7 @@
mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB\n\
ldmfd sp!, {r4, pc} @ 3"
:
- : "I" (PAGE_SIZE / 64));
+ : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
}
void v4wb_copy_user_highpage(struct page *to, struct page *from,
diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c
index 172e6a5..30c7d04 100644
--- a/arch/arm/mm/copypage-v4wt.c
+++ b/arch/arm/mm/copypage-v4wt.c
@@ -25,7 +25,7 @@
{
asm("\
stmfd sp!, {r4, lr} @ 2\n\
- mov r2, %0 @ 1\n\
+ mov r2, %2 @ 1\n\
ldmia r1!, {r3, r4, ip, lr} @ 4\n\
1: stmia r0!, {r3, r4, ip, lr} @ 4\n\
ldmia r1!, {r3, r4, ip, lr} @ 4+1\n\
@@ -40,7 +40,7 @@
mcr p15, 0, r2, c7, c7, 0 @ flush ID cache\n\
ldmfd sp!, {r4, pc} @ 3"
:
- : "I" (PAGE_SIZE / 64));
+ : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
}
void v4wt_copy_user_highpage(struct page *to, struct page *from,
diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c
index 747ad41..f9cde07 100644
--- a/arch/arm/mm/copypage-xsc3.c
+++ b/arch/arm/mm/copypage-xsc3.c
@@ -34,7 +34,7 @@
{
asm("\
stmfd sp!, {r4, r5, lr} \n\
- mov lr, %0 \n\
+ mov lr, %2 \n\
\n\
pld [r1, #0] \n\
pld [r1, #32] \n\
@@ -67,7 +67,7 @@
\n\
ldmfd sp!, {r4, r5, pc}"
:
- : "I" (PAGE_SIZE / 64 - 1));
+ : "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64 - 1));
}
void xsc3_mc_copy_user_highpage(struct page *to, struct page *from,
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 13fa536..9e7742f 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -24,15 +24,6 @@
#include <asm/tlbflush.h>
#include <asm/sizes.h>
-/* Sanity check size */
-#if (CONSISTENT_DMA_SIZE % SZ_2M)
-#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
-#endif
-
-#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
-#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
-#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
-
static u64 get_coherent_dma_mask(struct device *dev)
{
u64 mask = ISA_DMA_THRESHOLD;
@@ -123,6 +114,15 @@
}
#ifdef CONFIG_MMU
+/* Sanity check size */
+#if (CONSISTENT_DMA_SIZE % SZ_2M)
+#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
+#endif
+
+#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
+#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
+#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
+
/*
* These are the page tables (2MB each) covering uncached, DMA consistent allocations
*/
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 92f5801..cbfb2ed 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -393,6 +393,9 @@
if (addr < TASK_SIZE)
return do_page_fault(addr, fsr, regs);
+ if (user_mode(regs))
+ goto bad_area;
+
index = pgd_index(addr);
/*
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index 77b030f..086816b 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -48,7 +48,16 @@
debug_kmap_atomic(type);
- kmap = kmap_high_get(page);
+#ifdef CONFIG_DEBUG_HIGHMEM
+ /*
+ * There is no cache coherency issue when non VIVT, so force the
+ * dedicated kmap usage for better debugging purposes in that case.
+ */
+ if (!cache_is_vivt())
+ kmap = NULL;
+ else
+#endif
+ kmap = kmap_high_get(page);
if (kmap)
return kmap;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 1ba6cf5..f6a9994 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -678,10 +678,10 @@
void free_initmem(void)
{
#ifdef CONFIG_HAVE_TCM
- extern char *__tcm_start, *__tcm_end;
+ extern char __tcm_start, __tcm_end;
- totalram_pages += free_area(__phys_to_pfn(__pa(__tcm_start)),
- __phys_to_pfn(__pa(__tcm_end)),
+ totalram_pages += free_area(__phys_to_pfn(__pa(&__tcm_start)),
+ __phys_to_pfn(__pa(&__tcm_end)),
"TCM link");
#endif
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index 0ff3798..08aaa4a 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -13,7 +13,9 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/clockchips.h>
+#include <linux/clk.h>
#include <linux/jiffies.h>
+#include <linux/err.h>
#include <asm/mach/time.h>
#include <plat/mtu.h>
@@ -124,13 +126,25 @@
void __init nmdk_timer_init(void)
{
unsigned long rate;
- u32 cr = MTU_CRn_32BITS;;
+ struct clk *clk0;
+ struct clk *clk1;
+ u32 cr;
+
+ clk0 = clk_get_sys("mtu0", NULL);
+ BUG_ON(IS_ERR(clk0));
+
+ clk1 = clk_get_sys("mtu1", NULL);
+ BUG_ON(IS_ERR(clk1));
+
+ clk_enable(clk0);
+ clk_enable(clk1);
/*
* Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
* use a divide-by-16 counter if it's more than 16MHz
*/
- rate = CLOCK_TICK_RATE;
+ cr = MTU_CRn_32BITS;;
+ rate = clk_get_rate(clk0);
if (rate > 16 << 20) {
rate /= 16;
cr |= MTU_CRn_PRESCALE_16;
@@ -153,6 +167,14 @@
nmdk_clksrc.name);
/* Timer 1 is used for events, fix according to rate */
+ cr = MTU_CRn_32BITS;
+ rate = clk_get_rate(clk1);
+ if (rate > 16 << 20) {
+ rate /= 16;
+ cr |= MTU_CRn_PRESCALE_16;
+ } else {
+ cr |= MTU_CRn_PRESCALE_1;
+ }
writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
nmdk_clkevt.max_delta_ns =
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index c64875f..44bafda 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -541,11 +541,11 @@
* timer is stopped
*/
udelay(3500000 / clk_get_rate(timer->fclk) + 1);
- /* Ack possibly pending interrupt */
- omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
- OMAP_TIMER_INT_OVERFLOW);
#endif
}
+ /* Ack possibly pending interrupt */
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
+ OMAP_TIMER_INT_OVERFLOW);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index dc2ac42..9b7e354 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -624,79 +624,59 @@
__raw_writel(l, base + reg); \
} while(0)
-void omap_set_gpio_debounce(int gpio, int enable)
+/**
+ * _set_gpio_debounce - low level gpio debounce time
+ * @bank: the gpio bank we're acting upon
+ * @gpio: the gpio number on this @gpio
+ * @debounce: debounce time to use
+ *
+ * OMAP's debounce time is in 31us steps so we need
+ * to convert and round up to the closest unit.
+ */
+static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
+ unsigned debounce)
{
- struct gpio_bank *bank;
- void __iomem *reg;
- unsigned long flags;
- u32 val, l = 1 << get_gpio_index(gpio);
+ void __iomem *reg = bank->base;
+ u32 val;
+ u32 l;
- if (cpu_class_is_omap1())
- return;
-
- bank = get_gpio_bank(gpio);
- reg = bank->base;
-
- if (cpu_is_omap44xx())
- reg += OMAP4_GPIO_DEBOUNCENABLE;
+ if (debounce < 32)
+ debounce = 0x01;
+ else if (debounce > 7936)
+ debounce = 0xff;
else
- reg += OMAP24XX_GPIO_DEBOUNCE_EN;
+ debounce = (debounce / 0x1f) - 1;
- if (!(bank->mod_usage & l)) {
- printk(KERN_ERR "GPIO %d not requested\n", gpio);
- return;
- }
-
- spin_lock_irqsave(&bank->lock, flags);
- val = __raw_readl(reg);
-
- if (enable && !(val & l))
- val |= l;
- else if (!enable && (val & l))
- val &= ~l;
- else
- goto done;
-
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- bank->dbck_enable_mask = val;
- if (enable)
- clk_enable(bank->dbck);
- else
- clk_disable(bank->dbck);
- }
-
- __raw_writel(val, reg);
-done:
- spin_unlock_irqrestore(&bank->lock, flags);
-}
-EXPORT_SYMBOL(omap_set_gpio_debounce);
-
-void omap_set_gpio_debounce_time(int gpio, int enc_time)
-{
- struct gpio_bank *bank;
- void __iomem *reg;
-
- if (cpu_class_is_omap1())
- return;
-
- bank = get_gpio_bank(gpio);
- reg = bank->base;
-
- if (!bank->mod_usage) {
- printk(KERN_ERR "GPIO not requested\n");
- return;
- }
-
- enc_time &= 0xff;
+ l = 1 << get_gpio_index(gpio);
if (cpu_is_omap44xx())
reg += OMAP4_GPIO_DEBOUNCINGTIME;
else
reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
- __raw_writel(enc_time, reg);
+ __raw_writel(debounce, reg);
+
+ reg = bank->base;
+ if (cpu_is_omap44xx())
+ reg += OMAP4_GPIO_DEBOUNCENABLE;
+ else
+ reg += OMAP24XX_GPIO_DEBOUNCE_EN;
+
+ val = __raw_readl(reg);
+
+ if (debounce) {
+ val |= l;
+ if (cpu_is_omap34xx() || cpu_is_omap44xx())
+ clk_enable(bank->dbck);
+ } else {
+ val &= ~l;
+ if (cpu_is_omap34xx() || cpu_is_omap44xx())
+ clk_disable(bank->dbck);
+ }
+ bank->dbck_enable_mask = val;
+
+ __raw_writel(val, reg);
}
-EXPORT_SYMBOL(omap_set_gpio_debounce_time);
#ifdef CONFIG_ARCH_OMAP2PLUS
static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
@@ -1656,6 +1636,20 @@
return 0;
}
+static int gpio_debounce(struct gpio_chip *chip, unsigned offset,
+ unsigned debounce)
+{
+ struct gpio_bank *bank;
+ unsigned long flags;
+
+ bank = container_of(chip, struct gpio_bank, chip);
+ spin_lock_irqsave(&bank->lock, flags);
+ _set_gpio_debounce(bank, offset, debounce);
+ spin_unlock_irqrestore(&bank->lock, flags);
+
+ return 0;
+}
+
static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
struct gpio_bank *bank;
@@ -1909,6 +1903,7 @@
bank->chip.direction_input = gpio_input;
bank->chip.get = gpio_get;
bank->chip.direction_output = gpio_output;
+ bank->chip.set_debounce = gpio_debounce;
bank->chip.set = gpio_set;
bank->chip.to_irq = gpio_2irq;
if (bank_is_mpuio(bank)) {
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index e43983b..8ce0de2 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -140,8 +140,10 @@
return ERR_PTR(-ENOMEM);
err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL);
- if (err)
+ if (err) {
+ kfree(sgt);
return ERR_PTR(err);
+ }
pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries);
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 6187edf..a17cc0c 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -2,8 +2,9 @@
# Makefile for code common across different PXA processor families
#
-obj-y := dma.o pmu.o
+obj-y := dma.o
+obj-$(CONFIG_ARCH_PXA) += pmu.o
obj-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_PXA3xx) += mfp.o
obj-$(CONFIG_ARCH_MMP) += mfp.o
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 5cb2dd1..11d6a1b 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -29,3 +29,4 @@
bool
help
Use the external interrupts (other than GPIO interrupts.)
+ Note: Do not choose this for S5P6440.
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
index 24a931f..b5e2552 100644
--- a/arch/arm/plat-s5p/clock.c
+++ b/arch/arm/plat-s5p/clock.c
@@ -148,6 +148,7 @@
&clk_fout_vpll,
&clk_arm,
&clk_vpll,
+ &clk_xusbxti,
};
void __init s5p_register_clocks(unsigned long xtal_freq)
diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
index 9ff3d71..3fb3a3a 100644
--- a/arch/arm/plat-s5p/include/plat/irqs.h
+++ b/arch/arm/plat-s5p/include/plat/irqs.h
@@ -87,4 +87,11 @@
#define IRQ_TIMER3 S5P_TIMER_IRQ(3)
#define IRQ_TIMER4 S5P_TIMER_IRQ(4)
+#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \
+ : ((x) - 16 + S5P_EINT_BASE2))
+
+#define EINT_OFFSET(irq) ((irq) < S5P_EINT_BASE2 ? \
+ ((irq) - S5P_EINT_BASE1) : \
+ ((irq) + 16 - S5P_EINT_BASE2))
+
#endif /* __ASM_PLAT_S5P_IRQS_H */
diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c
index eaa70aa..f36cd33 100644
--- a/arch/arm/plat-s5p/irq-eint.c
+++ b/arch/arm/plat-s5p/irq-eint.c
@@ -60,7 +60,7 @@
static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type)
{
- int offs = eint_offset(irq);
+ int offs = EINT_OFFSET(irq);
int shift;
u32 ctrl, mask;
u32 newvalue = 0;
@@ -71,7 +71,7 @@
break;
case IRQ_TYPE_EDGE_FALLING:
- newvalue = S5P_EXTINT_RISEEDGE;
+ newvalue = S5P_EXTINT_FALLEDGE;
break;
case IRQ_TYPE_EDGE_BOTH:
@@ -139,17 +139,16 @@
*/
static inline void s5p_irq_demux_eint(unsigned int start)
{
- u32 status;
+ u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
unsigned int irq;
- status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
status &= ~mask;
status &= 0xff;
while (status) {
- irq = fls(status);
- generic_handle_irq(irq - 1 + start);
+ irq = fls(status) - 1;
+ generic_handle_irq(irq + start);
status &= ~(1 << irq);
}
}
@@ -162,12 +161,18 @@
static inline void s5p_irq_vic_eint_mask(unsigned int irq)
{
+ void __iomem *base = get_irq_chip_data(irq);
+
s5p_irq_eint_mask(irq);
+ writel(1 << EINT_OFFSET(irq), base + VIC_INT_ENABLE_CLEAR);
}
static void s5p_irq_vic_eint_unmask(unsigned int irq)
{
+ void __iomem *base = get_irq_chip_data(irq);
+
s5p_irq_eint_unmask(irq);
+ writel(1 << EINT_OFFSET(irq), base + VIC_INT_ENABLE);
}
static inline void s5p_irq_vic_eint_ack(unsigned int irq)
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 34efdd2..db4112c 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -43,6 +43,11 @@
* layouts. Provide an point to vector control routine and provide any
* per-bank configuration information that other systems such as the
* external interrupt code will need.
+ *
+ * @sa s3c_gpio_cfgpin
+ * @sa s3c_gpio_getcfg
+ * @sa s3c_gpio_setpull
+ * @sa s3c_gpio_getpull
*/
struct s3c_gpio_cfg {
unsigned int cfg_eint;
@@ -70,11 +75,25 @@
/**
* s3c_gpio_cfgpin() - Change the GPIO function of a pin.
* @pin pin The pin number to configure.
- * @pin to The configuration for the pin's function.
+ * @to to The configuration for the pin's function.
*
* Configure which function is actually connected to the external
* pin, such as an gpio input, output or some form of special function
* connected to an internal peripheral block.
+ *
+ * The @to parameter can be one of the generic S3C_GPIO_INPUT, S3C_GPIO_OUTPUT
+ * or S3C_GPIO_SFN() to indicate one of the possible values that the helper
+ * will then generate the correct bit mask and shift for the configuration.
+ *
+ * If a bank of GPIOs all needs to be set to special-function 2, then
+ * the following code will work:
+ *
+ * for (gpio = start; gpio < end; gpio++)
+ * s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ *
+ * The @to parameter can also be a specific value already shifted to the
+ * correct position in the control register, although these are discouraged
+ * in newer kernels and are only being kept for compatibility.
*/
extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
@@ -108,6 +127,8 @@
* This function sets the state of the pull-{up,down} resistor for the
* specified pin. It will return 0 if successfull, or a negative error
* code if the pin cannot support the requested pull setting.
+ *
+ * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
*/
extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 13f9fb2..016674f 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -166,8 +166,10 @@
#else
static inline void s3c6410_default_sdhci0(void) { }
static inline void s3c6410_default_sdhci1(void) { }
+static inline void s3c6410_default_sdhci2(void) { }
static inline void s3c6400_default_sdhci0(void) { }
static inline void s3c6400_default_sdhci1(void) { }
+static inline void s3c6400_default_sdhci2(void) { }
#endif /* CONFIG_S3C64XX_SETUP_SDHCI */
@@ -239,7 +241,7 @@
s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
}
#else
-static inline void s5pc100_default_sdhci0(void) { }
+static inline void s5pv210_default_sdhci0(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC */
#ifdef CONFIG_S3C_DEV_HSMMC1
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 8f10d24..48cbdcb 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Sat May 1 10:36:42 2010
+# Last update: Mon Jul 12 21:10:14 2010
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -1994,7 +1994,7 @@
benzina MACH_BENZINA BENZINA 2003
blaze MACH_BLAZE BLAZE 2004
linkstation_ls_hgl MACH_LINKSTATION_LS_HGL LINKSTATION_LS_HGL 2005
-htckovsky MACH_HTCVENUS HTCVENUS 2006
+htckovsky MACH_HTCKOVSKY HTCKOVSKY 2006
sony_prs505 MACH_SONY_PRS505 SONY_PRS505 2007
hanlin_v3 MACH_HANLIN_V3 HANLIN_V3 2008
sapphira MACH_SAPPHIRA SAPPHIRA 2009
@@ -2609,7 +2609,7 @@
lexikon MACH_LEXIKON LEXIKON 2622
mini2440v2 MACH_MINI2440V2 MINI2440V2 2623
icontrol MACH_ICONTROL ICONTROL 2624
-sheevad MACH_SHEEVAD SHEEVAD 2625
+gplugd MACH_SHEEVAD SHEEVAD 2625
qsd8x50a_st1_1 MACH_QSD8X50A_ST1_1 QSD8X50A_ST1_1 2626
qsd8x50a_st1_5 MACH_QSD8X50A_ST1_5 QSD8X50A_ST1_5 2627
bee MACH_BEE BEE 2628
@@ -2804,3 +2804,149 @@
snapper9g45 MACH_SNAPPER9G45 SNAPPER9G45 2817
tam3517 MACH_TAM3517 TAM3517 2818
pdc100 MACH_PDC100 PDC100 2819
+eukrea_cpuimx25sd MACH_EUKREA_CPUIMX25 EUKREA_CPUIMX25 2820
+eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35 EUKREA_CPUIMX35 2821
+eukrea_cpuimx51sd MACH_EUKREA_CPUIMX51SD EUKREA_CPUIMX51SD 2822
+eukrea_cpuimx51 MACH_EUKREA_CPUIMX51 EUKREA_CPUIMX51 2823
+p565 MACH_P565 P565 2824
+acer_a4 MACH_ACER_A4 ACER_A4 2825
+davinci_dm368_bip MACH_DAVINCI_DM368_BIP DAVINCI_DM368_BIP 2826
+eshare MACH_ESHARE ESHARE 2827
+hw_omapl138_europa MACH_HW_OMAPL138_EUROPA HW_OMAPL138_EUROPA 2828
+wlbargn MACH_WLBARGN WLBARGN 2829
+bm170 MACH_BM170 BM170 2830
+netspace_mini_v2 MACH_NETSPACE_MINI_V2 NETSPACE_MINI_V2 2831
+netspace_plug_v2 MACH_NETSPACE_PLUG_V2 NETSPACE_PLUG_V2 2832
+siemens_l1 MACH_SIEMENS_L1 SIEMENS_L1 2833
+elv_lcu1 MACH_ELV_LCU1 ELV_LCU1 2834
+mcu1 MACH_MCU1 MCU1 2835
+omap3_tao3530 MACH_OMAP3_TAO3530 OMAP3_TAO3530 2836
+omap3_pcutouch MACH_OMAP3_PCUTOUCH OMAP3_PCUTOUCH 2837
+smdkc210 MACH_SMDKC210 SMDKC210 2838
+omap3_braillo MACH_OMAP3_BRAILLO OMAP3_BRAILLO 2839
+spyplug MACH_SPYPLUG SPYPLUG 2840
+ginger MACH_GINGER GINGER 2841
+tny_t3530 MACH_TNY_T3530 TNY_T3530 2842
+pca102 MACH_PCA102 PCA102 2843
+spade MACH_SPADE SPADE 2844
+mxc25_topaz MACH_MXC25_TOPAZ MXC25_TOPAZ 2845
+t5325 MACH_T5325 T5325 2846
+gw2361 MACH_GW2361 GW2361 2847
+elog MACH_ELOG ELOG 2848
+income MACH_INCOME INCOME 2849
+bcm589x MACH_BCM589X BCM589X 2850
+etna MACH_ETNA ETNA 2851
+hawks MACH_HAWKS HAWKS 2852
+meson MACH_MESON MESON 2853
+xsbase255 MACH_XSBASE255 XSBASE255 2854
+pvm2030 MACH_PVM2030 PVM2030 2855
+mioa502 MACH_MIOA502 MIOA502 2856
+vvbox_sdorig2 MACH_VVBOX_SDORIG2 VVBOX_SDORIG2 2857
+vvbox_sdlite2 MACH_VVBOX_SDLITE2 VVBOX_SDLITE2 2858
+vvbox_sdpro4 MACH_VVBOX_SDPRO4 VVBOX_SDPRO4 2859
+htc_spv_m700 MACH_HTC_SPV_M700 HTC_SPV_M700 2860
+mx257sx MACH_MX257SX MX257SX 2861
+goni MACH_GONI GONI 2862
+msm8x55_svlte_ffa MACH_MSM8X55_SVLTE_FFA MSM8X55_SVLTE_FFA 2863
+msm8x55_svlte_surf MACH_MSM8X55_SVLTE_SURF MSM8X55_SVLTE_SURF 2864
+quickstep MACH_QUICKSTEP QUICKSTEP 2865
+dmw96 MACH_DMW96 DMW96 2866
+hammerhead MACH_HAMMERHEAD HAMMERHEAD 2867
+trident MACH_TRIDENT TRIDENT 2868
+lightning MACH_LIGHTNING LIGHTNING 2869
+iconnect MACH_ICONNECT ICONNECT 2870
+autobot MACH_AUTOBOT AUTOBOT 2871
+coconut MACH_COCONUT COCONUT 2872
+durian MACH_DURIAN DURIAN 2873
+cayenne MACH_CAYENNE CAYENNE 2874
+fuji MACH_FUJI FUJI 2875
+synology_6282 MACH_SYNOLOGY_6282 SYNOLOGY_6282 2876
+em1sy MACH_EM1SY EM1SY 2877
+m502 MACH_M502 M502 2878
+matrix518 MACH_MATRIX518 MATRIX518 2879
+tiny_gurnard MACH_TINY_GURNARD TINY_GURNARD 2880
+spear1310 MACH_SPEAR1310 SPEAR1310 2881
+bv07 MACH_BV07 BV07 2882
+mxt_td61 MACH_MXT_TD61 MXT_TD61 2883
+openrd_ultimate MACH_OPENRD_ULTIMATE OPENRD_ULTIMATE 2884
+devixp MACH_DEVIXP DEVIXP 2885
+miccpt MACH_MICCPT MICCPT 2886
+mic256 MACH_MIC256 MIC256 2887
+as1167 MACH_AS1167 AS1167 2888
+omap3_ibiza MACH_OMAP3_IBIZA OMAP3_IBIZA 2889
+u5500 MACH_U5500 U5500 2890
+davinci_picto MACH_DAVINCI_PICTO DAVINCI_PICTO 2891
+mecha MACH_MECHA MECHA 2892
+bubba3 MACH_BUBBA3 BUBBA3 2893
+pupitre MACH_PUPITRE PUPITRE 2894
+tegra_harmony MACH_TEGRA_HARMONY TEGRA_HARMONY 2895
+tegra_vogue MACH_TEGRA_VOGUE TEGRA_VOGUE 2896
+tegra_e1165 MACH_TEGRA_E1165 TEGRA_E1165 2897
+simplenet MACH_SIMPLENET SIMPLENET 2898
+ec4350tbm MACH_EC4350TBM EC4350TBM 2899
+pec_tc MACH_PEC_TC PEC_TC 2900
+pec_hc2 MACH_PEC_HC2 PEC_HC2 2901
+esl_mobilis_a MACH_ESL_MOBILIS_A ESL_MOBILIS_A 2902
+esl_mobilis_b MACH_ESL_MOBILIS_B ESL_MOBILIS_B 2903
+esl_wave_a MACH_ESL_WAVE_A ESL_WAVE_A 2904
+esl_wave_b MACH_ESL_WAVE_B ESL_WAVE_B 2905
+unisense_mmm MACH_UNISENSE_MMM UNISENSE_MMM 2906
+blueshark MACH_BLUESHARK BLUESHARK 2907
+e10 MACH_E10 E10 2908
+app3k_robin MACH_APP3K_ROBIN APP3K_ROBIN 2909
+pov15hd MACH_POV15HD POV15HD 2910
+stella MACH_STELLA STELLA 2911
+linkstation_lschl MACH_LINKSTATION_LSCHL LINKSTATION_LSCHL 2913
+netwalker MACH_NETWALKER NETWALKER 2914
+acsx106 MACH_ACSX106 ACSX106 2915
+atlas5_c1 MACH_ATLAS5_C1 ATLAS5_C1 2916
+nsb3ast MACH_NSB3AST NSB3AST 2917
+gnet_slc MACH_GNET_SLC GNET_SLC 2918
+af4000 MACH_AF4000 AF4000 2919
+ark9431 MACH_ARK9431 ARK9431 2920
+fs_s5pc100 MACH_FS_S5PC100 FS_S5PC100 2921
+omap3505nova8 MACH_OMAP3505NOVA8 OMAP3505NOVA8 2922
+omap3621_edp1 MACH_OMAP3621_EDP1 OMAP3621_EDP1 2923
+oratisaes MACH_ORATISAES ORATISAES 2924
+smdkv310 MACH_SMDKV310 SMDKV310 2925
+siemens_l0 MACH_SIEMENS_L0 SIEMENS_L0 2926
+ventana MACH_VENTANA VENTANA 2927
+wm8505_7in_netbook MACH_WM8505_7IN_NETBOOK WM8505_7IN_NETBOOK 2928
+ec4350sdb MACH_EC4350SDB EC4350SDB 2929
+mimas MACH_MIMAS MIMAS 2930
+titan MACH_TITAN TITAN 2931
+craneboard MACH_CRANEBOARD CRANEBOARD 2932
+es2440 MACH_ES2440 ES2440 2933
+najay_a9263 MACH_NAJAY_A9263 NAJAY_A9263 2934
+htctornado MACH_HTCTORNADO HTCTORNADO 2935
+dimm_mx257 MACH_DIMM_MX257 DIMM_MX257 2936
+jigen301 MACH_JIGEN JIGEN 2937
+smdk6450 MACH_SMDK6450 SMDK6450 2938
+meno_qng MACH_MENO_QNG MENO_QNG 2939
+ns2416 MACH_NS2416 NS2416 2940
+rpc353 MACH_RPC353 RPC353 2941
+tq6410 MACH_TQ6410 TQ6410 2942
+sky6410 MACH_SKY6410 SKY6410 2943
+dynasty MACH_DYNASTY DYNASTY 2944
+vivo MACH_VIVO VIVO 2945
+bury_bl7582 MACH_BURY_BL7582 BURY_BL7582 2946
+bury_bps5270 MACH_BURY_BPS5270 BURY_BPS5270 2947
+basi MACH_BASI BASI 2948
+tn200 MACH_TN200 TN200 2949
+c2mmi MACH_C2MMI C2MMI 2950
+meson_6236m MACH_MESON_6236M MESON_6236M 2951
+meson_8626m MACH_MESON_8626M MESON_8626M 2952
+tube MACH_TUBE TUBE 2953
+messina MACH_MESSINA MESSINA 2954
+mx50_arm2 MACH_MX50_ARM2 MX50_ARM2 2955
+cetus9263 MACH_CETUS9263 CETUS9263 2956
+brownstone MACH_BROWNSTONE BROWNSTONE 2957
+vmx25 MACH_VMX25 VMX25 2958
+vmx51 MACH_VMX51 VMX51 2959
+abacus MACH_ABACUS ABACUS 2960
+cm4745 MACH_CM4745 CM4745 2961
+oratislink MACH_ORATISLINK ORATISLINK 2962
+davinci_dm365_dvr MACH_DAVINCI_DM365_DVR DAVINCI_DM365_DVR 2963
+netviz MACH_NETVIZ NETVIZ 2964
+flexibity MACH_FLEXIBITY FLEXIBITY 2965
+wlan_computer MACH_WLAN_COMPUTER WLAN_COMPUTER 2966
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 66dc2d0..d66cead 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -277,7 +277,7 @@
#ifdef CONFIG_VFPv3
@ d16 - d31 registers
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1: mcrr p11, 3, r1, r2, c\dr @ fmdrr r1, r2, d\dr
+1: mcrr p11, 3, r0, r1, c\dr @ fmdrr r0, r1, d\dr
mov pc, lr
.org 1b + 8
.endr
diff --git a/arch/avr32/include/asm/scatterlist.h b/arch/avr32/include/asm/scatterlist.h
index 377320e..06394e5 100644
--- a/arch/avr32/include/asm/scatterlist.h
+++ b/arch/avr32/include/asm/scatterlist.h
@@ -1,25 +1,7 @@
#ifndef __ASM_AVR32_SCATTERLIST_H
#define __ASM_AVR32_SCATTERLIST_H
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset;
- dma_addr_t dma_address;
- unsigned int length;
-};
-
-/* These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns.
- */
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->length)
+#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (0xffffffff)
diff --git a/arch/blackfin/include/asm/scatterlist.h b/arch/blackfin/include/asm/scatterlist.h
index 04f4487..64d41d3 100644
--- a/arch/blackfin/include/asm/scatterlist.h
+++ b/arch/blackfin/include/asm/scatterlist.h
@@ -1,27 +1,7 @@
#ifndef _BLACKFIN_SCATTERLIST_H
#define _BLACKFIN_SCATTERLIST_H
-#include <linux/mm.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset;
- dma_addr_t dma_address;
- unsigned int length;
-};
-
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->length)
+#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (0xffffffff)
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index 43eb969..6ec7768 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -292,28 +292,6 @@
break;
}
-#ifdef CONFIG_BINFMT_ELF_FDPIC
- case PTRACE_GETFDPIC: {
- unsigned long tmp = 0;
-
- switch (addr) {
- case_PTRACE_GETFDPIC_EXEC:
- case PTRACE_GETFDPIC_EXEC:
- tmp = child->mm->context.exec_fdpic_loadmap;
- break;
- case_PTRACE_GETFDPIC_INTERP:
- case PTRACE_GETFDPIC_INTERP:
- tmp = child->mm->context.interp_fdpic_loadmap;
- break;
- default:
- break;
- }
-
- ret = put_user(tmp, datap);
- break;
- }
-#endif
-
/* when I and D space are separate, this will have to be fixed. */
case PTRACE_POKEDATA:
pr_debug("ptrace: PTRACE_PEEKDATA\n");
@@ -357,8 +335,14 @@
case PTRACE_PEEKUSR:
switch (addr) {
#ifdef CONFIG_BINFMT_ELF_FDPIC /* backwards compat */
- case PT_FDPIC_EXEC: goto case_PTRACE_GETFDPIC_EXEC;
- case PT_FDPIC_INTERP: goto case_PTRACE_GETFDPIC_INTERP;
+ case PT_FDPIC_EXEC:
+ request = PTRACE_GETFDPIC;
+ addr = PTRACE_GETFDPIC_EXEC;
+ goto case_default;
+ case PT_FDPIC_INTERP:
+ request = PTRACE_GETFDPIC;
+ addr = PTRACE_GETFDPIC_INTERP;
+ goto case_default;
#endif
default:
ret = get_reg(child, addr, datap);
@@ -385,6 +369,7 @@
0, sizeof(struct pt_regs),
(const void __user *)data);
+ case_default:
default:
ret = ptrace_request(child, request, addr, data);
break;
diff --git a/arch/cris/arch-v10/drivers/ds1302.c b/arch/cris/arch-v10/drivers/ds1302.c
index 77630df..8842756 100644
--- a/arch/cris/arch-v10/drivers/ds1302.c
+++ b/arch/cris/arch-v10/drivers/ds1302.c
@@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/miscdevice.h>
#include <linux/delay.h>
+#include <linux/smp_lock.h>
#include <linux/bcd.h>
#include <linux/capability.h>
@@ -238,9 +239,7 @@
/* ioctl that supports RTC_RD_TIME and RTC_SET_TIME (read and set time/date). */
-static int
-rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
- unsigned long arg)
+static int rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
unsigned long flags;
@@ -354,6 +353,17 @@
}
}
+static long rtc_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ int ret;
+
+ lock_kernel();
+ ret = rtc_ioctl(file, cmd, arg);
+ unlock_kernel();
+
+ return ret;
+}
+
static void
print_rtc_status(void)
{
@@ -375,8 +385,8 @@
/* The various file operations we support. */
static const struct file_operations rtc_fops = {
- .owner = THIS_MODULE,
- .ioctl = rtc_ioctl,
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = rtc_unlocked_ioctl,
};
/* Probe for the chip by writing something to its RAM and try reading it back. */
diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c
index 1e90c1a..7dcb1f8 100644
--- a/arch/cris/arch-v10/drivers/pcf8563.c
+++ b/arch/cris/arch-v10/drivers/pcf8563.c
@@ -27,6 +27,7 @@
#include <linux/delay.h>
#include <linux/bcd.h>
#include <linux/mutex.h>
+#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/system.h>
@@ -53,7 +54,7 @@
static const unsigned char days_in_month[] =
{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
-int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+static long pcf8563_unlocked_ioctl(struct file *, unsigned int, unsigned long);
/* Cache VL bit value read at driver init since writing the RTC_SECOND
* register clears the VL status.
@@ -62,7 +63,7 @@
static const struct file_operations pcf8563_fops = {
.owner = THIS_MODULE,
- .ioctl = pcf8563_ioctl,
+ .unlocked_ioctl = pcf8563_unlocked_ioctl,
};
unsigned char
@@ -212,8 +213,7 @@
* ioctl calls for this driver. Why return -ENOTTY upon error? Because
* POSIX says so!
*/
-int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
- unsigned long arg)
+static int pcf8563_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
/* Some sanity checks. */
if (_IOC_TYPE(cmd) != RTC_MAGIC)
@@ -339,6 +339,17 @@
return 0;
}
+static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+ int ret;
+
+ lock_kernel();
+ return pcf8563_ioctl(filp, cmd, arg);
+ unlock_kernel();
+
+ return ret;
+}
+
static int __init pcf8563_register(void)
{
if (pcf8563_init() < 0) {
diff --git a/arch/cris/arch-v10/kernel/irq.c b/arch/cris/arch-v10/kernel/irq.c
index 1a61efc..a0c0df8 100644
--- a/arch/cris/arch-v10/kernel/irq.c
+++ b/arch/cris/arch-v10/kernel/irq.c
@@ -17,8 +17,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#define mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr));
-#define unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr));
+#define crisv10_mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr));
+#define crisv10_unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr));
/* don't use set_int_vector, it bypasses the linux interrupt handlers. it is
* global just so that the kernel gdb can use it.
@@ -116,12 +116,12 @@
static void enable_crisv10_irq(unsigned int irq)
{
- unmask_irq(irq);
+ crisv10_unmask_irq(irq);
}
static void disable_crisv10_irq(unsigned int irq)
{
- mask_irq(irq);
+ crisv10_mask_irq(irq);
}
static void ack_crisv10_irq(unsigned int irq)
diff --git a/arch/cris/arch-v10/lib/dmacopy.c b/arch/cris/arch-v10/lib/dmacopy.c
index e5fb44f..49f5b8c 100644
--- a/arch/cris/arch-v10/lib/dmacopy.c
+++ b/arch/cris/arch-v10/lib/dmacopy.c
@@ -1,5 +1,4 @@
-/* $Id: dmacopy.c,v 1.1 2001/12/17 13:59:27 bjornw Exp $
- *
+/*
* memcpy for large blocks, using memory-memory DMA channels 6 and 7 in Etrax
*/
@@ -13,11 +12,11 @@
unsigned int pn)
{
static etrax_dma_descr indma, outdma;
-
- D(printk("dma_memcpy %d bytes... ", pn));
+
+ D(printk(KERN_DEBUG "dma_memcpy %d bytes... ", pn));
#if 0
- *R_GEN_CONFIG = genconfig_shadow =
+ *R_GEN_CONFIG = genconfig_shadow =
(genconfig_shadow & ~0x3c0000) |
IO_STATE(R_GEN_CONFIG, dma6, intdma7) |
IO_STATE(R_GEN_CONFIG, dma7, intdma6);
@@ -32,11 +31,11 @@
*R_DMA_CH7_FIRST = &outdma;
*R_DMA_CH6_CMD = IO_STATE(R_DMA_CH6_CMD, cmd, start);
*R_DMA_CH7_CMD = IO_STATE(R_DMA_CH7_CMD, cmd, start);
-
- while(*R_DMA_CH7_CMD == 1) /* wait for completion */ ;
- D(printk("done\n"));
+ while (*R_DMA_CH7_CMD == 1)
+ /* wait for completion */;
+ D(printk(KERN_DEBUG "done\n"));
}
diff --git a/arch/cris/arch-v10/lib/hw_settings.S b/arch/cris/arch-v10/lib/hw_settings.S
index 56905aa..c09f19f 100644
--- a/arch/cris/arch-v10/lib/hw_settings.S
+++ b/arch/cris/arch-v10/lib/hw_settings.S
@@ -1,13 +1,11 @@
/*
- * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
- *
* This table is used by some tools to extract hardware parameters.
* The table should be included in the kernel and the decompressor.
* Don't forget to update the tools if you change this table.
*
* Copyright (C) 2001 Axis Communications AB
*
- * Authors: Mikael Starvik (starvik@axis.com)
+ * Authors: Mikael Starvik (starvik@axis.com)
*/
#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
@@ -15,13 +13,13 @@
#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
(CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
(CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
-
+
.ascii "HW_PARAM_MAGIC" ; Magic number
.dword 0xc0004000 ; Kernel start address
; Debug port
#ifdef CONFIG_ETRAX_DEBUG_PORT0
- .dword 0
+ .dword 0
#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
.dword 1
#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
@@ -30,7 +28,7 @@
.dword 3
#else
.dword 4 ; No debug
-#endif
+#endif
; SDRAM or EDO DRAM?
#ifdef CONFIG_ETRAX_SDRAM
@@ -39,7 +37,7 @@
.dword 0
#endif
- ; Register values
+ ; Register values
.dword R_WAITSTATES
.dword CONFIG_ETRAX_DEF_R_WAITSTATES
.dword R_BUS_CONFIG
@@ -56,7 +54,7 @@
.dword CONFIG_ETRAX_DEF_R_DRAM_TIMING
#endif
.dword R_PORT_PA_SET
- .dword PA_SET_VALUE
+ .dword PA_SET_VALUE
.dword R_PORT_PB_SET
.dword PB_SET_VALUE
.dword 0 ; No more register values
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index b9e328e..a2dd740 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -360,24 +360,10 @@
string "Ser 4 DSR bit (empty = not used)"
depends on ETRAX_SERIAL_PORT4
-config ETRAX_SER3_CD_BIT
+config ETRAX_SER4_CD_BIT
string "Ser 4 CD bit (empty = not used)"
depends on ETRAX_SERIAL_PORT4
-config ETRAX_RS485
- bool "RS-485 support"
- depends on ETRAXFS_SERIAL
- help
- Enables support for RS-485 serial communication. For a primer on
- RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>.
-
-config ETRAX_RS485_DISABLE_RECEIVER
- bool "Disable serial receiver"
- depends on ETRAX_RS485
- help
- It is necessary to disable the serial receiver to avoid serial
- loopback. Not all products are able to do this in software only.
-
config ETRAX_SYNCHRONOUS_SERIAL
bool "Synchronous serial-port support"
depends on ETRAX_ARCH_V32
diff --git a/arch/cris/arch-v32/drivers/i2c.c b/arch/cris/arch-v32/drivers/i2c.c
index 5068263..2fd6a74 100644
--- a/arch/cris/arch-v32/drivers/i2c.c
+++ b/arch/cris/arch-v32/drivers/i2c.c
@@ -649,10 +649,10 @@
/* Main device API. ioctl's to write or read to/from i2c registers.
*/
-static int
-i2c_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long
+i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
+ int ret;
if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
return -ENOTTY;
}
@@ -665,9 +665,13 @@
I2C_ARGREG(arg),
I2C_ARGVALUE(arg)));
- return i2c_writereg(I2C_ARGSLAVE(arg),
+ lock_kernel();
+ ret = i2c_writereg(I2C_ARGSLAVE(arg),
I2C_ARGREG(arg),
I2C_ARGVALUE(arg));
+ unlock_kernel();
+ return ret;
+
case I2C_READREG:
{
unsigned char val;
@@ -675,7 +679,9 @@
D(printk("i2cr %d %d ",
I2C_ARGSLAVE(arg),
I2C_ARGREG(arg)));
+ lock_kernel();
val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
+ unlock_kernel();
D(printk("= %d\n", val));
return val;
}
@@ -688,10 +694,10 @@
}
static const struct file_operations i2c_fops = {
- .owner = THIS_MODULE,
- .ioctl = i2c_ioctl,
- .open = i2c_open,
- .release = i2c_release,
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = i2c_ioctl,
+ .open = i2c_open,
+ .release = i2c_release,
};
static int __init i2c_init(void)
diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c
index f447850..bef6eb5 100644
--- a/arch/cris/arch-v32/drivers/pcf8563.c
+++ b/arch/cris/arch-v32/drivers/pcf8563.c
@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/ioctl.h>
+#include <linux/smp_lock.h>
#include <linux/delay.h>
#include <linux/bcd.h>
#include <linux/mutex.h>
@@ -49,7 +50,7 @@
static const unsigned char days_in_month[] =
{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
-int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
/* Cache VL bit value read at driver init since writing the RTC_SECOND
* register clears the VL status.
@@ -57,8 +58,8 @@
static int voltage_low;
static const struct file_operations pcf8563_fops = {
- .owner = THIS_MODULE,
- .ioctl = pcf8563_ioctl
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = pcf8563_unlocked_ioctl,
};
unsigned char
@@ -208,8 +209,7 @@
* ioctl calls for this driver. Why return -ENOTTY upon error? Because
* POSIX says so!
*/
-int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
- unsigned long arg)
+static int pcf8563_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
/* Some sanity checks. */
if (_IOC_TYPE(cmd) != RTC_MAGIC)
@@ -335,6 +335,17 @@
return 0;
}
+static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+ int ret;
+
+ lock_kernel();
+ return pcf8563_ioctl(filp, cmd, arg);
+ unlock_kernel();
+
+ return ret;
+}
+
static int __init pcf8563_register(void)
{
if (pcf8563_init() < 0) {
diff --git a/arch/cris/arch-v32/kernel/crisksyms.c b/arch/cris/arch-v32/kernel/crisksyms.c
index 64933e2..bde8d1a 100644
--- a/arch/cris/arch-v32/kernel/crisksyms.c
+++ b/arch/cris/arch-v32/kernel/crisksyms.c
@@ -24,5 +24,5 @@
EXPORT_SYMBOL(crisv32_io_get);
/* Functions masking/unmasking interrupts */
-EXPORT_SYMBOL(mask_irq);
-EXPORT_SYMBOL(unmask_irq);
+EXPORT_SYMBOL(crisv32_mask_irq);
+EXPORT_SYMBOL(crisv32_unmask_irq);
diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c
index b624119..0b1febe 100644
--- a/arch/cris/arch-v32/kernel/irq.c
+++ b/arch/cris/arch-v32/kernel/irq.c
@@ -280,8 +280,7 @@
return cpu;
}
-void
-mask_irq(int irq)
+void crisv32_mask_irq(int irq)
{
int cpu;
@@ -289,8 +288,7 @@
block_irq(irq, cpu);
}
-void
-unmask_irq(int irq)
+void crisv32_unmask_irq(int irq)
{
unblock_irq(irq, irq_cpu(irq));
}
@@ -298,23 +296,23 @@
static unsigned int startup_crisv32_irq(unsigned int irq)
{
- unmask_irq(irq);
+ crisv32_unmask_irq(irq);
return 0;
}
static void shutdown_crisv32_irq(unsigned int irq)
{
- mask_irq(irq);
+ crisv32_mask_irq(irq);
}
static void enable_crisv32_irq(unsigned int irq)
{
- unmask_irq(irq);
+ crisv32_unmask_irq(irq);
}
static void disable_crisv32_irq(unsigned int irq)
{
- mask_irq(irq);
+ crisv32_mask_irq(irq);
}
static void ack_crisv32_irq(unsigned int irq)
diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c
index 058addd..84fed3b 100644
--- a/arch/cris/arch-v32/kernel/smp.c
+++ b/arch/cris/arch-v32/kernel/smp.c
@@ -168,8 +168,8 @@
/* Enable IRQ and idle */
REG_WR(intr_vect, irq_regs[cpu], rw_mask, vect_mask);
- unmask_irq(IPI_INTR_VECT);
- unmask_irq(TIMER0_INTR_VECT);
+ crisv32_unmask_irq(IPI_INTR_VECT);
+ crisv32_unmask_irq(TIMER0_INTR_VECT);
preempt_disable();
notify_cpu_starting(cpu);
local_irq_enable();
diff --git a/arch/cris/include/arch-v10/arch/irq.h b/arch/cris/include/arch-v10/arch/irq.h
index 6248004..7d34594 100644
--- a/arch/cris/include/arch-v10/arch/irq.h
+++ b/arch/cris/include/arch-v10/arch/irq.h
@@ -93,15 +93,16 @@
"push $r10\n\t" /* push orig_r10 */ \
"clear.d [$sp=$sp-4]\n\t" /* frametype - this is a normal stackframe */
- /* BLOCK_IRQ and UNBLOCK_IRQ do the same as mask_irq and unmask_irq */
+/* BLOCK_IRQ and UNBLOCK_IRQ do the same as
+ * crisv10_mask_irq and crisv10_unmask_irq */
#define BLOCK_IRQ(mask,nr) \
"move.d " #mask ",$r0\n\t" \
- "move.d $r0,[0xb00000d8]\n\t"
-
+ "move.d $r0,[0xb00000d8]\n\t"
+
#define UNBLOCK_IRQ(mask) \
"move.d " #mask ",$r0\n\t" \
- "move.d $r0,[0xb00000dc]\n\t"
+ "move.d $r0,[0xb00000dc]\n\t"
#define IRQ_NAME2(nr) nr##_interrupt(void)
#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr)
diff --git a/arch/cris/include/arch-v32/arch/irq.h b/arch/cris/include/arch-v32/arch/irq.h
index 9e4c9fb..b31e998 100644
--- a/arch/cris/include/arch-v32/arch/irq.h
+++ b/arch/cris/include/arch-v32/arch/irq.h
@@ -23,8 +23,8 @@
extern struct etrax_interrupt_vector *etrax_irv; /* head.S */
-void mask_irq(int irq);
-void unmask_irq(int irq);
+void crisv32_mask_irq(int irq);
+void crisv32_unmask_irq(int irq);
void set_exception_vector(int n, irqvectptr addr);
diff --git a/arch/cris/include/asm/param.h b/arch/cris/include/asm/param.h
index 0e47994..484fcf8 100644
--- a/arch/cris/include/asm/param.h
+++ b/arch/cris/include/asm/param.h
@@ -2,22 +2,9 @@
#define _ASMCRIS_PARAM_H
/* Currently we assume that HZ=100 is good for CRIS. */
-#ifdef __KERNEL__
-# define HZ CONFIG_HZ /* Internal kernel timer frequency */
-# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
#define EXEC_PAGESIZE 8192
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
+#include <asm-generic/param.h>
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
-#endif
+#endif /* _ASMCRIS_PARAM_H */
diff --git a/arch/cris/include/asm/scatterlist.h b/arch/cris/include/asm/scatterlist.h
index faff53a..249a784 100644
--- a/arch/cris/include/asm/scatterlist.h
+++ b/arch/cris/include/asm/scatterlist.h
@@ -1,22 +1,7 @@
#ifndef __ASM_CRIS_SCATTERLIST_H
#define __ASM_CRIS_SCATTERLIST_H
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- char * address; /* Location data is to be transferred to */
- unsigned int length;
-
- /* The following is i386 highmem junk - not used by us */
- unsigned long page_link;
- unsigned int offset;/* for highmem, page offset */
-
-};
-
-#define sg_dma_address(sg) ((sg)->address)
-#define sg_dma_len(sg) ((sg)->length)
-/* i386 junk */
+#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (0x1fffffff)
diff --git a/arch/frv/include/asm/cache.h b/arch/frv/include/asm/cache.h
index 7dc0f0f..2797163 100644
--- a/arch/frv/include/asm/cache.h
+++ b/arch/frv/include/asm/cache.h
@@ -17,8 +17,6 @@
#define L1_CACHE_SHIFT (CONFIG_FRV_L1_CACHE_SHIFT)
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
-
#define __cacheline_aligned __attribute__((aligned(L1_CACHE_BYTES)))
#define ____cacheline_aligned __attribute__((aligned(L1_CACHE_BYTES)))
diff --git a/arch/frv/include/asm/mem-layout.h b/arch/frv/include/asm/mem-layout.h
index 2947764..ccae981 100644
--- a/arch/frv/include/asm/mem-layout.h
+++ b/arch/frv/include/asm/mem-layout.h
@@ -35,8 +35,8 @@
* the slab must be aligned such that load- and store-double instructions don't
* fault if used
*/
-#define ARCH_KMALLOC_MINALIGN 8
-#define ARCH_SLAB_MINALIGN 8
+#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_SLAB_MINALIGN L1_CACHE_BYTES
/*****************************************************************************/
/*
diff --git a/arch/frv/include/asm/scatterlist.h b/arch/frv/include/asm/scatterlist.h
index 4bca8a2..1614bfd 100644
--- a/arch/frv/include/asm/scatterlist.h
+++ b/arch/frv/include/asm/scatterlist.h
@@ -1,45 +1,7 @@
#ifndef _ASM_SCATTERLIST_H
#define _ASM_SCATTERLIST_H
-#include <asm/types.h>
-
-/*
- * Drivers must set either ->address or (preferred) page and ->offset
- * to indicate where data must be transferred to/from.
- *
- * Using page is recommended since it handles highmem data as well as
- * low mem. ->address is restricted to data which has a virtual mapping, and
- * it will go away in the future. Updating to page can be automated very
- * easily -- something like
- *
- * sg->address = some_ptr;
- *
- * can be rewritten as
- *
- * sg_set_buf(sg, some_ptr, length);
- *
- * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens
- */
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset; /* for highmem, page offset */
-
- dma_addr_t dma_address;
- unsigned int length;
-};
-
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->length)
+#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (0xffffffffUL)
diff --git a/arch/frv/kernel/break.S b/arch/frv/kernel/break.S
index bd0bdf9..cbb6958 100644
--- a/arch/frv/kernel/break.S
+++ b/arch/frv/kernel/break.S
@@ -21,7 +21,7 @@
#
# the break handler has its own stack
#
- .section .bss.stack
+ .section .bss..stack
.globl __break_user_context
.balign THREAD_SIZE
__break_stack:
@@ -63,7 +63,7 @@
# entry point for Break Exceptions/Interrupts
#
###############################################################################
- .section .text.break
+ .section .text..break
.balign 4
.globl __entry_break
__entry_break:
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index 189397e..63d579b 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -38,7 +38,7 @@
#define nr_syscalls ((syscall_table_size)/4)
- .section .text.entry
+ .section .text..entry
.balign 4
.macro LEDS val
diff --git a/arch/frv/kernel/gdb-stub.c b/arch/frv/kernel/gdb-stub.c
index 84d103c3..a4dba6b 100644
--- a/arch/frv/kernel/gdb-stub.c
+++ b/arch/frv/kernel/gdb-stub.c
@@ -1789,6 +1789,12 @@
flush_cache = 1;
break;
+ /* pNN: Read value of reg N and return it */
+ case 'p':
+ /* return no value, indicating that we don't support
+ * this command and that gdb should use 'g' instead */
+ break;
+
/* PNN,=RRRRRRRR: Write value R to reg N return OK */
case 'P':
ptr = &input_buffer[1];
diff --git a/arch/frv/kernel/head.S b/arch/frv/kernel/head.S
index b825ef3..e9a8cc6 100644
--- a/arch/frv/kernel/head.S
+++ b/arch/frv/kernel/head.S
@@ -542,7 +542,7 @@
.size _boot, .-_boot
# provide a point for GDB to place a break
- .section .text.start,"ax"
+ .section .text..start,"ax"
.globl _start
.balign 4
_start:
diff --git a/arch/frv/kernel/ptrace.c b/arch/frv/kernel/ptrace.c
index 60eeed3..fac0289 100644
--- a/arch/frv/kernel/ptrace.c
+++ b/arch/frv/kernel/ptrace.c
@@ -344,26 +344,6 @@
0, sizeof(child->thread.user->f),
(const void __user *)data);
- case PTRACE_GETFDPIC:
- tmp = 0;
- switch (addr) {
- case PTRACE_GETFDPIC_EXEC:
- tmp = child->mm->context.exec_fdpic_loadmap;
- break;
- case PTRACE_GETFDPIC_INTERP:
- tmp = child->mm->context.interp_fdpic_loadmap;
- break;
- default:
- break;
- }
-
- ret = 0;
- if (put_user(tmp, (unsigned long *) data)) {
- ret = -EFAULT;
- break;
- }
- break;
-
default:
ret = ptrace_request(child, request, addr, data);
break;
diff --git a/arch/frv/kernel/sysctl.c b/arch/frv/kernel/sysctl.c
index 71abd15..6c155d6 100644
--- a/arch/frv/kernel/sysctl.c
+++ b/arch/frv/kernel/sysctl.c
@@ -46,8 +46,9 @@
/*
* handle requests to dynamically switch the write caching mode delivered by /proc
*/
-static int procctl_frv_cachemode(ctl_table *table, int write, struct file *filp,
- void __user *buffer, size_t *lenp, loff_t *ppos)
+static int procctl_frv_cachemode(ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
{
unsigned long hsr0;
char buff[8];
@@ -84,7 +85,7 @@
}
/* read the state */
- if (filp->f_pos > 0) {
+ if (*ppos > 0) {
*lenp = 0;
return 0;
}
@@ -110,7 +111,7 @@
return -EFAULT;
*lenp = len;
- filp->f_pos = len;
+ *ppos = len;
return 0;
} /* end procctl_frv_cachemode() */
@@ -120,8 +121,9 @@
* permit the mm_struct the nominated process is using have its MMU context ID pinned
*/
#ifdef CONFIG_MMU
-static int procctl_frv_pin_cxnr(ctl_table *table, int write, struct file *filp,
- void __user *buffer, size_t *lenp, loff_t *ppos)
+static int procctl_frv_pin_cxnr(ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
{
pid_t pid;
char buff[16], *p;
@@ -150,7 +152,7 @@
}
/* read the currently pinned CXN */
- if (filp->f_pos > 0) {
+ if (*ppos > 0) {
*lenp = 0;
return 0;
}
@@ -163,7 +165,7 @@
return -EFAULT;
*lenp = len;
- filp->f_pos = len;
+ *ppos = len;
return 0;
} /* end procctl_frv_pin_cxnr() */
diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S
index cbe811f..8b973f3 100644
--- a/arch/frv/kernel/vmlinux.lds.S
+++ b/arch/frv/kernel/vmlinux.lds.S
@@ -57,10 +57,10 @@
_text = .;
_stext = .;
.text : {
- *(.text.start)
- *(.text.entry)
- *(.text.break)
- *(.text.tlbmiss)
+ *(.text..start)
+ *(.text..entry)
+ *(.text..break)
+ *(.text..tlbmiss)
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
@@ -114,7 +114,7 @@
.sbss : { *(.sbss .sbss.*) }
.bss : { *(.bss .bss.*) }
- .bss.stack : { *(.bss) }
+ .bss..stack : { *(.bss) }
__bss_stop = .;
_end = . ;
diff --git a/arch/frv/mm/fault.c b/arch/frv/mm/fault.c
index 30f5d10..a325d57 100644
--- a/arch/frv/mm/fault.c
+++ b/arch/frv/mm/fault.c
@@ -257,10 +257,10 @@
*/
out_of_memory:
up_read(&mm->mmap_sem);
- printk("VM: killing process %s\n", current->comm);
- if (user_mode(__frame))
- do_group_exit(SIGKILL);
- goto no_context;
+ if (!user_mode(__frame))
+ goto no_context;
+ pagefault_out_of_memory();
+ return;
do_sigbus:
up_read(&mm->mmap_sem);
diff --git a/arch/frv/mm/tlb-miss.S b/arch/frv/mm/tlb-miss.S
index 7f392bc..f3ac019 100644
--- a/arch/frv/mm/tlb-miss.S
+++ b/arch/frv/mm/tlb-miss.S
@@ -15,7 +15,7 @@
#include <asm/pgtable.h>
#include <asm/spr-regs.h>
- .section .text.tlbmiss
+ .section .text..tlbmiss
.balign 4
.globl __entry_insn_mmu_miss
diff --git a/arch/h8300/boot/compressed/head.S b/arch/h8300/boot/compressed/head.S
index 985a81a..10e9a2d 100644
--- a/arch/h8300/boot/compressed/head.S
+++ b/arch/h8300/boot/compressed/head.S
@@ -9,7 +9,7 @@
#define SRAM_START 0xff4000
- .section .text.startup
+ .section .text..startup
.global startup
startup:
mov.l #SRAM_START+0x8000, sp
diff --git a/arch/h8300/boot/compressed/vmlinux.lds b/arch/h8300/boot/compressed/vmlinux.lds
index 65e2a0d..a0a3a0e 100644
--- a/arch/h8300/boot/compressed/vmlinux.lds
+++ b/arch/h8300/boot/compressed/vmlinux.lds
@@ -4,7 +4,7 @@
{
__stext = . ;
__text = .;
- *(.text.startup)
+ *(.text..startup)
*(.text)
__etext = . ;
}
diff --git a/arch/h8300/include/asm/scatterlist.h b/arch/h8300/include/asm/scatterlist.h
index d3ecdd8..de08a4a 100644
--- a/arch/h8300/include/asm/scatterlist.h
+++ b/arch/h8300/include/asm/scatterlist.h
@@ -1,17 +1,7 @@
#ifndef _H8300_SCATTERLIST_H
#define _H8300_SCATTERLIST_H
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset;
- dma_addr_t dma_address;
- unsigned int length;
-};
+#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (0xffffffff)
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 9676100..9561082 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -56,6 +56,9 @@
config NEED_DMA_MAP_STATE
def_bool y
+config NEED_SG_DMA_LENGTH
+ def_bool y
+
config SWIOTLB
bool
@@ -495,6 +498,14 @@
def_bool y
depends on NUMA
+config USE_PERCPU_NUMA_NODE_ID
+ def_bool y
+ depends on NUMA
+
+config HAVE_MEMORYLESS_NODES
+ def_bool y
+ depends on NUMA
+
config ARCH_PROC_KCORE_TEXT
def_bool y
depends on PROC_KCORE
diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h
index 21adbd7..837dc82 100644
--- a/arch/ia64/include/asm/acpi.h
+++ b/arch/ia64/include/asm/acpi.h
@@ -94,7 +94,6 @@
#define acpi_noirq 0 /* ACPI always enabled on IA64 */
#define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
#define acpi_strict 1 /* no ACPI spec workarounds on IA64 */
-#define acpi_ht 0 /* no HT-only mode on IA64 */
#endif
#define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
static inline void disable_acpi(void) { }
diff --git a/arch/ia64/include/asm/asmmacro.h b/arch/ia64/include/asm/asmmacro.h
index c1642fd..3ab6d75 100644
--- a/arch/ia64/include/asm/asmmacro.h
+++ b/arch/ia64/include/asm/asmmacro.h
@@ -70,12 +70,12 @@
* path (ivt.S - TLB miss processing) or in places where it might not be
* safe to use a "tpa" instruction (mca_asm.S - error recovery).
*/
- .section ".data.patch.vtop", "a" // declare section & section attributes
+ .section ".data..patch.vtop", "a" // declare section & section attributes
.previous
#define LOAD_PHYSICAL(pr, reg, obj) \
[1:](pr)movl reg = obj; \
- .xdata4 ".data.patch.vtop", 1b-.
+ .xdata4 ".data..patch.vtop", 1b-.
/*
* For now, we always put in the McKinley E9 workaround. On CPUs that don't need it,
@@ -84,11 +84,11 @@
#define DO_MCKINLEY_E9_WORKAROUND
#ifdef DO_MCKINLEY_E9_WORKAROUND
- .section ".data.patch.mckinley_e9", "a"
+ .section ".data..patch.mckinley_e9", "a"
.previous
/* workaround for Itanium 2 Errata 9: */
# define FSYS_RETURN \
- .xdata4 ".data.patch.mckinley_e9", 1f-.; \
+ .xdata4 ".data..patch.mckinley_e9", 1f-.; \
1:{ .mib; \
nop.m 0; \
mov r16=ar.pfs; \
@@ -107,11 +107,11 @@
* If physical stack register size is different from DEF_NUM_STACK_REG,
* dynamically patch the kernel for correct size.
*/
- .section ".data.patch.phys_stack_reg", "a"
+ .section ".data..patch.phys_stack_reg", "a"
.previous
#define LOAD_PHYS_STACK_REG_SIZE(reg) \
[1:] adds reg=IA64_NUM_PHYS_STACK_REG*8+8,r0; \
- .xdata4 ".data.patch.phys_stack_reg", 1b-.
+ .xdata4 ".data..patch.phys_stack_reg", 1b-.
/*
* Up until early 2004, use of .align within a function caused bad unwind info.
diff --git a/arch/ia64/include/asm/cache.h b/arch/ia64/include/asm/cache.h
index e7482bd..988254a 100644
--- a/arch/ia64/include/asm/cache.h
+++ b/arch/ia64/include/asm/cache.h
@@ -24,6 +24,6 @@
# define SMP_CACHE_BYTES (1 << 3)
#endif
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
#endif /* _ASM_IA64_CACHE_H */
diff --git a/arch/ia64/include/asm/percpu.h b/arch/ia64/include/asm/percpu.h
index 1bd4082..14aa1c5 100644
--- a/arch/ia64/include/asm/percpu.h
+++ b/arch/ia64/include/asm/percpu.h
@@ -31,7 +31,7 @@
#endif /* SMP */
-#define PER_CPU_BASE_SECTION ".data.percpu"
+#define PER_CPU_BASE_SECTION ".data..percpu"
/*
* Be extremely careful when taking the address of this variable! Due to virtual
diff --git a/arch/ia64/include/asm/scatterlist.h b/arch/ia64/include/asm/scatterlist.h
index d8e9896..f299a4f 100644
--- a/arch/ia64/include/asm/scatterlist.h
+++ b/arch/ia64/include/asm/scatterlist.h
@@ -1,6 +1,7 @@
#ifndef _ASM_IA64_SCATTERLIST_H
#define _ASM_IA64_SCATTERLIST_H
+#include <asm-generic/scatterlist.h>
/*
* It used to be that ISA_DMA_THRESHOLD had something to do with the
* DMA-limits of ISA-devices. Nowadays, its only remaining use (apart
@@ -10,7 +11,6 @@
* that's 4GB - 1.
*/
#define ISA_DMA_THRESHOLD 0xffffffff
-
-#include <asm-generic/scatterlist.h>
+#define ARCH_HAS_SG_CHAIN
#endif /* _ASM_IA64_SCATTERLIST_H */
diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h
index d323071..09f6467 100644
--- a/arch/ia64/include/asm/topology.h
+++ b/arch/ia64/include/asm/topology.h
@@ -26,11 +26,6 @@
#define RECLAIM_DISTANCE 15
/*
- * Returns the number of the node containing CPU 'cpu'
- */
-#define cpu_to_node(cpu) (int)(cpu_to_node_map[cpu])
-
-/*
* Returns a bitmask of CPUs on Node 'node'.
*/
#define cpumask_of_node(node) ((node) == -1 ? \
diff --git a/arch/ia64/kernel/Makefile.gate b/arch/ia64/kernel/Makefile.gate
index ab9b03a..ceeffc5 100644
--- a/arch/ia64/kernel/Makefile.gate
+++ b/arch/ia64/kernel/Makefile.gate
@@ -21,7 +21,7 @@
$(obj)/gate-syms.o: $(obj)/gate.lds $(obj)/gate.o FORCE
$(call if_changed,gate)
-# gate-data.o contains the gate DSO image as data in section .data.gate.
+# gate-data.o contains the gate DSO image as data in section .data..gate.
# We must build gate.so before we can assemble it.
# Note: kbuild does not track this dependency due to usage of .incbin
$(obj)/gate-data.o: $(obj)/gate.so
diff --git a/arch/ia64/kernel/gate-data.S b/arch/ia64/kernel/gate-data.S
index 258c0a3..b3ef1c7 100644
--- a/arch/ia64/kernel/gate-data.S
+++ b/arch/ia64/kernel/gate-data.S
@@ -1,3 +1,3 @@
- .section .data.gate, "aw"
+ .section .data..gate, "aw"
.incbin "arch/ia64/kernel/gate.so"
diff --git a/arch/ia64/kernel/gate.S b/arch/ia64/kernel/gate.S
index cf5e0a1..245d3e1 100644
--- a/arch/ia64/kernel/gate.S
+++ b/arch/ia64/kernel/gate.S
@@ -21,18 +21,18 @@
* to targets outside the shared object) and to avoid multi-phase kernel builds, we
* simply create minimalistic "patch lists" in special ELF sections.
*/
- .section ".data.patch.fsyscall_table", "a"
+ .section ".data..patch.fsyscall_table", "a"
.previous
#define LOAD_FSYSCALL_TABLE(reg) \
[1:] movl reg=0; \
- .xdata4 ".data.patch.fsyscall_table", 1b-.
+ .xdata4 ".data..patch.fsyscall_table", 1b-.
- .section ".data.patch.brl_fsys_bubble_down", "a"
+ .section ".data..patch.brl_fsys_bubble_down", "a"
.previous
#define BRL_COND_FSYS_BUBBLE_DOWN(pr) \
[1:](pr)brl.cond.sptk 0; \
;; \
- .xdata4 ".data.patch.brl_fsys_bubble_down", 1b-.
+ .xdata4 ".data..patch.brl_fsys_bubble_down", 1b-.
GLOBAL_ENTRY(__kernel_syscall_via_break)
.prologue
diff --git a/arch/ia64/kernel/gate.lds.S b/arch/ia64/kernel/gate.lds.S
index 88c64ed..d32b085 100644
--- a/arch/ia64/kernel/gate.lds.S
+++ b/arch/ia64/kernel/gate.lds.S
@@ -33,21 +33,21 @@
*/
. = GATE_ADDR + 0x600;
- .data.patch : {
+ .data..patch : {
__paravirt_start_gate_mckinley_e9_patchlist = .;
- *(.data.patch.mckinley_e9)
+ *(.data..patch.mckinley_e9)
__paravirt_end_gate_mckinley_e9_patchlist = .;
__paravirt_start_gate_vtop_patchlist = .;
- *(.data.patch.vtop)
+ *(.data..patch.vtop)
__paravirt_end_gate_vtop_patchlist = .;
__paravirt_start_gate_fsyscall_patchlist = .;
- *(.data.patch.fsyscall_table)
+ *(.data..patch.fsyscall_table)
__paravirt_end_gate_fsyscall_patchlist = .;
__paravirt_start_gate_brl_fsys_bubble_down_patchlist = .;
- *(.data.patch.brl_fsys_bubble_down)
+ *(.data..patch.brl_fsys_bubble_down)
__paravirt_end_gate_brl_fsys_bubble_down_patchlist = .;
} :readable
diff --git a/arch/ia64/kernel/init_task.c b/arch/ia64/kernel/init_task.c
index e253ab8..f9efe97 100644
--- a/arch/ia64/kernel/init_task.c
+++ b/arch/ia64/kernel/init_task.c
@@ -23,7 +23,7 @@
* Initial task structure.
*
* We need to make sure that this is properly aligned due to the way process stacks are
- * handled. This is done by having a special ".data.init_task" section...
+ * handled. This is done by having a special ".data..init_task" section...
*/
#define init_thread_info init_task_mem.s.thread_info
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index 179fd12..d93e396 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -82,7 +82,7 @@
mov r19=n;; /* prepare to save predicates */ \
br.sptk.many dispatch_to_fault_handler
- .section .text.ivt,"ax"
+ .section .text..ivt,"ax"
.align 32768 // align on 32KB boundary
.global ia64_ivt
diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h
index 292e214..d56753a 100644
--- a/arch/ia64/kernel/minstate.h
+++ b/arch/ia64/kernel/minstate.h
@@ -16,7 +16,7 @@
#define ACCOUNT_SYS_ENTER
#endif
-.section ".data.patch.rse", "a"
+.section ".data..patch.rse", "a"
.previous
/*
@@ -215,7 +215,7 @@
(pUStk) extr.u r17=r18,3,6; \
(pUStk) sub r16=r18,r22; \
[1:](pKStk) br.cond.sptk.many 1f; \
- .xdata4 ".data.patch.rse",1b-. \
+ .xdata4 ".data..patch.rse",1b-. \
;; \
cmp.ge p6,p7 = 33,r17; \
;; \
diff --git a/arch/ia64/kernel/paravirtentry.S b/arch/ia64/kernel/paravirtentry.S
index 6158560..92d880c 100644
--- a/arch/ia64/kernel/paravirtentry.S
+++ b/arch/ia64/kernel/paravirtentry.S
@@ -28,7 +28,7 @@
#include "entry.h"
#define DATA8(sym, init_value) \
- .pushsection .data.read_mostly ; \
+ .pushsection .data..read_mostly ; \
.align 8 ; \
.global sym ; \
sym: ; \
diff --git a/arch/ia64/kernel/pci-swiotlb.c b/arch/ia64/kernel/pci-swiotlb.c
index 3095654..d9485d9 100644
--- a/arch/ia64/kernel/pci-swiotlb.c
+++ b/arch/ia64/kernel/pci-swiotlb.c
@@ -31,8 +31,6 @@
.unmap_sg = swiotlb_unmap_sg_attrs,
.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
.sync_single_for_device = swiotlb_sync_single_for_device,
- .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
- .sync_single_range_for_device = swiotlb_sync_single_range_for_device,
.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
.sync_sg_for_device = swiotlb_sync_sg_for_device,
.dma_supported = swiotlb_dma_supported,
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 0dec7f7..7c7909f 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -638,7 +638,7 @@
*/
read_lock(&tasklist_lock);
- if (child->signal) {
+ if (child->sighand) {
spin_lock_irq(&child->sighand->siglock);
if (child->state == TASK_STOPPED &&
!test_and_set_tsk_thread_flag(child, TIF_RESTORE_RSE)) {
@@ -662,7 +662,7 @@
* job control stop, so that SIGCONT can be used to wake it up.
*/
read_lock(&tasklist_lock);
- if (child->signal) {
+ if (child->sighand) {
spin_lock_irq(&child->sighand->siglock);
if (child->state == TASK_TRACED &&
(child->signal->flags & SIGNAL_STOP_STOPPED)) {
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index e5230b2..6a1380e 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -390,6 +390,14 @@
fix_b0_for_bsp();
+#ifdef CONFIG_NUMA
+ /*
+ * numa_node_id() works after this.
+ */
+ set_numa_node(cpu_to_node_map[cpuid]);
+ set_numa_mem(local_memory_node(cpu_to_node_map[cpuid]));
+#endif
+
ipi_call_lock_irq();
spin_lock(&vector_lock);
/* Setup the per cpu irq handling data structures */
@@ -632,6 +640,9 @@
{
cpu_set(smp_processor_id(), cpu_online_map);
cpu_set(smp_processor_id(), cpu_callin_map);
+#ifdef CONFIG_NUMA
+ set_numa_node(cpu_to_node_map[smp_processor_id()]);
+#endif
per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
paravirt_post_smp_prepare_boot_cpu();
}
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 1295ba3..e07218a 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -8,7 +8,7 @@
#define IVT_TEXT \
VMLINUX_SYMBOL(__start_ivt_text) = .; \
- *(.text.ivt) \
+ *(.text..ivt) \
VMLINUX_SYMBOL(__end_ivt_text) = .;
OUTPUT_FORMAT("elf64-ia64-little")
@@ -54,8 +54,8 @@
.text2 : AT(ADDR(.text2) - LOAD_OFFSET)
{ *(.text2) }
#ifdef CONFIG_SMP
- .text.lock : AT(ADDR(.text.lock) - LOAD_OFFSET)
- { *(.text.lock) }
+ .text..lock : AT(ADDR(.text..lock) - LOAD_OFFSET)
+ { *(.text..lock) }
#endif
_etext = .;
@@ -75,10 +75,10 @@
__stop___mca_table = .;
}
- .data.patch.phys_stack_reg : AT(ADDR(.data.patch.phys_stack_reg) - LOAD_OFFSET)
+ .data..patch.phys_stack_reg : AT(ADDR(.data..patch.phys_stack_reg) - LOAD_OFFSET)
{
__start___phys_stack_reg_patchlist = .;
- *(.data.patch.phys_stack_reg)
+ *(.data..patch.phys_stack_reg)
__end___phys_stack_reg_patchlist = .;
}
@@ -110,24 +110,24 @@
INIT_TEXT_SECTION(PAGE_SIZE)
INIT_DATA_SECTION(16)
- .data.patch.vtop : AT(ADDR(.data.patch.vtop) - LOAD_OFFSET)
+ .data..patch.vtop : AT(ADDR(.data..patch.vtop) - LOAD_OFFSET)
{
__start___vtop_patchlist = .;
- *(.data.patch.vtop)
+ *(.data..patch.vtop)
__end___vtop_patchlist = .;
}
- .data.patch.rse : AT(ADDR(.data.patch.rse) - LOAD_OFFSET)
+ .data..patch.rse : AT(ADDR(.data..patch.rse) - LOAD_OFFSET)
{
__start___rse_patchlist = .;
- *(.data.patch.rse)
+ *(.data..patch.rse)
__end___rse_patchlist = .;
}
- .data.patch.mckinley_e9 : AT(ADDR(.data.patch.mckinley_e9) - LOAD_OFFSET)
+ .data..patch.mckinley_e9 : AT(ADDR(.data..patch.mckinley_e9) - LOAD_OFFSET)
{
__start___mckinley_e9_bundles = .;
- *(.data.patch.mckinley_e9)
+ *(.data..patch.mckinley_e9)
__end___mckinley_e9_bundles = .;
}
@@ -175,17 +175,17 @@
. = ALIGN(PAGE_SIZE);
__init_end = .;
- .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET)
+ .data..page_aligned : AT(ADDR(.data..page_aligned) - LOAD_OFFSET)
{
PAGE_ALIGNED_DATA(PAGE_SIZE)
. = ALIGN(PAGE_SIZE);
__start_gate_section = .;
- *(.data.gate)
+ *(.data..gate)
__stop_gate_section = .;
#ifdef CONFIG_XEN
. = ALIGN(PAGE_SIZE);
__xen_start_gate_section = .;
- *(.data.gate.xen)
+ *(.data..gate.xen)
__xen_stop_gate_section = .;
#endif
}
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index d5f4e91..21b7013 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -144,6 +144,7 @@
VP_INIT_ENV : VP_INIT_ENV_INITALIZE,
__pa(kvm_vm_buffer), KVM_VM_BUFFER_BASE, &tmp_base);
if (status != 0) {
+ spin_unlock(&vp_lock);
printk(KERN_WARNING"kvm: Failed to Enable VT Support!!!!\n");
return -EINVAL;
}
diff --git a/arch/ia64/kvm/vmm_ivt.S b/arch/ia64/kvm/vmm_ivt.S
index 40920c6..2401848 100644
--- a/arch/ia64/kvm/vmm_ivt.S
+++ b/arch/ia64/kvm/vmm_ivt.S
@@ -104,7 +104,7 @@
br.call.sptk.many b6=vmm_panic_handler;
END(kvm_vmm_panic)
- .section .text.ivt,"ax"
+ .section .text..ivt,"ax"
.align 32768 // align on 32KB boundary
.global kvm_ia64_ivt
diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c
index 5dfd916..7b3cdc6 100644
--- a/arch/ia64/mm/tlb.c
+++ b/arch/ia64/mm/tlb.c
@@ -121,7 +121,7 @@
ia64_invala();
for (;;) {
- asm volatile ("ld4.c.nc %0=[%1]" : "=r"(serve) : "r"(&ss->serve) : "memory");
+ asm volatile ("ld8.c.nc %0=[%1]" : "=r"(serve) : "r"(&ss->serve) : "memory");
if (time_before(t, serve))
return;
cpu_relax();
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 64aff52..aa2533a 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -335,8 +335,11 @@
}
struct pci_bus * __devinit
-pci_acpi_scan_root(struct acpi_device *device, int domain, int bus)
+pci_acpi_scan_root(struct acpi_pci_root *root)
{
+ struct acpi_device *device = root->device;
+ int domain = root->segment;
+ int bus = root->secondary.start;
struct pci_controller *controller;
unsigned int windows = 0;
struct pci_bus *pbus;
diff --git a/arch/ia64/scripts/unwcheck.py b/arch/ia64/scripts/unwcheck.py
index c278498..2bfd941 100644
--- a/arch/ia64/scripts/unwcheck.py
+++ b/arch/ia64/scripts/unwcheck.py
@@ -1,4 +1,4 @@
-#!/usr/bin/env python
+#!/usr/bin/python
#
# Usage: unwcheck.py FILE
#
diff --git a/arch/ia64/xen/gate-data.S b/arch/ia64/xen/gate-data.S
index 7d4830a..6f95b6b 100644
--- a/arch/ia64/xen/gate-data.S
+++ b/arch/ia64/xen/gate-data.S
@@ -1,3 +1,3 @@
- .section .data.gate.xen, "aw"
+ .section .data..gate.xen, "aw"
.incbin "arch/ia64/xen/gate.so"
diff --git a/arch/ia64/xen/xensetup.S b/arch/ia64/xen/xensetup.S
index aff8346..b820ed0 100644
--- a/arch/ia64/xen/xensetup.S
+++ b/arch/ia64/xen/xensetup.S
@@ -14,7 +14,7 @@
#include <linux/init.h>
#include <xen/interface/elfnote.h>
- .section .data.read_mostly
+ .section .data..read_mostly
.align 8
.global xen_domain_type
xen_domain_type:
diff --git a/arch/m32r/include/asm/scatterlist.h b/arch/m32r/include/asm/scatterlist.h
index 1ed372c..aeeddd8 100644
--- a/arch/m32r/include/asm/scatterlist.h
+++ b/arch/m32r/include/asm/scatterlist.h
@@ -1,20 +1,7 @@
#ifndef _ASM_M32R_SCATTERLIST_H
#define _ASM_M32R_SCATTERLIST_H
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- char * address; /* Location data is to be transferred to, NULL for
- * highmem page */
- unsigned long page_link;
- unsigned int offset;/* for highmem, page offset */
-
- dma_addr_t dma_address;
- unsigned int length;
-};
+#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (0x1fffffff)
diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c
index 28ee389..b8ec002 100644
--- a/arch/m32r/mm/fault.c
+++ b/arch/m32r/mm/fault.c
@@ -188,7 +188,6 @@
if ((error_code & ACE_INSTRUCTION) && !(vma->vm_flags & VM_EXEC))
goto bad_area;
-survive:
/*
* If for any reason at all we couldn't handle the fault,
* make sure we exit gracefully rather than endlessly redo
@@ -271,15 +270,10 @@
*/
out_of_memory:
up_read(&mm->mmap_sem);
- if (is_global_init(tsk)) {
- yield();
- down_read(&mm->mmap_sem);
- goto survive;
- }
- printk("VM: killing process %s\n", tsk->comm);
- if (error_code & ACE_USERMODE)
- do_group_exit(SIGKILL);
- goto no_context;
+ if (!(error_code & ACE_USERMODE))
+ goto no_context;
+ pagefault_out_of_memory();
+ return;
do_sigbus:
up_read(&mm->mmap_sem);
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index b5da298..2e3737b 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -7,6 +7,7 @@
default y
select HAVE_AOUT
select HAVE_IDE
+ select GENERIC_ATOMIC64
config MMU
bool
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index d2cc35d..b1577f7 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -97,10 +97,6 @@
static void amiga_get_hardware_list(struct seq_file *m);
/* amiga specific timer functions */
static unsigned long amiga_gettimeoffset(void);
-static int a3000_hwclk(int, struct rtc_time *);
-static int a2000_hwclk(int, struct rtc_time *);
-static int amiga_set_clock_mmss(unsigned long);
-static unsigned int amiga_get_ss(void);
extern void amiga_mksound(unsigned int count, unsigned int ticks);
static void amiga_reset(void);
extern void amiga_init_sound(void);
@@ -138,10 +134,6 @@
}
};
-static struct resource rtc_resource = {
- .start = 0x00dc0000, .end = 0x00dcffff
-};
-
static struct resource ram_resource[NUM_MEMINFO];
@@ -387,15 +379,6 @@
mach_get_model = amiga_get_model;
mach_get_hardware_list = amiga_get_hardware_list;
mach_gettimeoffset = amiga_gettimeoffset;
- if (AMIGAHW_PRESENT(A3000_CLK)) {
- mach_hwclk = a3000_hwclk;
- rtc_resource.name = "A3000 RTC";
- request_resource(&iomem_resource, &rtc_resource);
- } else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
- mach_hwclk = a2000_hwclk;
- rtc_resource.name = "A2000 RTC";
- request_resource(&iomem_resource, &rtc_resource);
- }
/*
* default MAX_DMA=0xffffffff on all machines. If we don't do so, the SCSI
@@ -404,8 +387,6 @@
*/
mach_max_dma_address = 0xffffffff;
- mach_set_clock_mmss = amiga_set_clock_mmss;
- mach_get_ss = amiga_get_ss;
mach_reset = amiga_reset;
#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
mach_beep = amiga_mksound;
@@ -530,161 +511,6 @@
return ticks + offset;
}
-static int a3000_hwclk(int op, struct rtc_time *t)
-{
- tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD;
-
- if (!op) { /* read */
- t->tm_sec = tod_3000.second1 * 10 + tod_3000.second2;
- t->tm_min = tod_3000.minute1 * 10 + tod_3000.minute2;
- t->tm_hour = tod_3000.hour1 * 10 + tod_3000.hour2;
- t->tm_mday = tod_3000.day1 * 10 + tod_3000.day2;
- t->tm_wday = tod_3000.weekday;
- t->tm_mon = tod_3000.month1 * 10 + tod_3000.month2 - 1;
- t->tm_year = tod_3000.year1 * 10 + tod_3000.year2;
- if (t->tm_year <= 69)
- t->tm_year += 100;
- } else {
- tod_3000.second1 = t->tm_sec / 10;
- tod_3000.second2 = t->tm_sec % 10;
- tod_3000.minute1 = t->tm_min / 10;
- tod_3000.minute2 = t->tm_min % 10;
- tod_3000.hour1 = t->tm_hour / 10;
- tod_3000.hour2 = t->tm_hour % 10;
- tod_3000.day1 = t->tm_mday / 10;
- tod_3000.day2 = t->tm_mday % 10;
- if (t->tm_wday != -1)
- tod_3000.weekday = t->tm_wday;
- tod_3000.month1 = (t->tm_mon + 1) / 10;
- tod_3000.month2 = (t->tm_mon + 1) % 10;
- if (t->tm_year >= 100)
- t->tm_year -= 100;
- tod_3000.year1 = t->tm_year / 10;
- tod_3000.year2 = t->tm_year % 10;
- }
-
- tod_3000.cntrl1 = TOD3000_CNTRL1_FREE;
-
- return 0;
-}
-
-static int a2000_hwclk(int op, struct rtc_time *t)
-{
- int cnt = 5;
-
- tod_2000.cntrl1 = TOD2000_CNTRL1_HOLD;
-
- while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) {
- tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
- udelay(70);
- tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
- --cnt;
- }
-
- if (!cnt)
- printk(KERN_INFO "hwclk: timed out waiting for RTC (0x%x)\n",
- tod_2000.cntrl1);
-
- if (!op) { /* read */
- t->tm_sec = tod_2000.second1 * 10 + tod_2000.second2;
- t->tm_min = tod_2000.minute1 * 10 + tod_2000.minute2;
- t->tm_hour = (tod_2000.hour1 & 3) * 10 + tod_2000.hour2;
- t->tm_mday = tod_2000.day1 * 10 + tod_2000.day2;
- t->tm_wday = tod_2000.weekday;
- t->tm_mon = tod_2000.month1 * 10 + tod_2000.month2 - 1;
- t->tm_year = tod_2000.year1 * 10 + tod_2000.year2;
- if (t->tm_year <= 69)
- t->tm_year += 100;
-
- if (!(tod_2000.cntrl3 & TOD2000_CNTRL3_24HMODE)) {
- if (!(tod_2000.hour1 & TOD2000_HOUR1_PM) && t->tm_hour == 12)
- t->tm_hour = 0;
- else if ((tod_2000.hour1 & TOD2000_HOUR1_PM) && t->tm_hour != 12)
- t->tm_hour += 12;
- }
- } else {
- tod_2000.second1 = t->tm_sec / 10;
- tod_2000.second2 = t->tm_sec % 10;
- tod_2000.minute1 = t->tm_min / 10;
- tod_2000.minute2 = t->tm_min % 10;
- if (tod_2000.cntrl3 & TOD2000_CNTRL3_24HMODE)
- tod_2000.hour1 = t->tm_hour / 10;
- else if (t->tm_hour >= 12)
- tod_2000.hour1 = TOD2000_HOUR1_PM +
- (t->tm_hour - 12) / 10;
- else
- tod_2000.hour1 = t->tm_hour / 10;
- tod_2000.hour2 = t->tm_hour % 10;
- tod_2000.day1 = t->tm_mday / 10;
- tod_2000.day2 = t->tm_mday % 10;
- if (t->tm_wday != -1)
- tod_2000.weekday = t->tm_wday;
- tod_2000.month1 = (t->tm_mon + 1) / 10;
- tod_2000.month2 = (t->tm_mon + 1) % 10;
- if (t->tm_year >= 100)
- t->tm_year -= 100;
- tod_2000.year1 = t->tm_year / 10;
- tod_2000.year2 = t->tm_year % 10;
- }
-
- tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
-
- return 0;
-}
-
-static int amiga_set_clock_mmss(unsigned long nowtime)
-{
- short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
-
- if (AMIGAHW_PRESENT(A3000_CLK)) {
- tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD;
-
- tod_3000.second1 = real_seconds / 10;
- tod_3000.second2 = real_seconds % 10;
- tod_3000.minute1 = real_minutes / 10;
- tod_3000.minute2 = real_minutes % 10;
-
- tod_3000.cntrl1 = TOD3000_CNTRL1_FREE;
- } else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
- int cnt = 5;
-
- tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
-
- while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) {
- tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
- udelay(70);
- tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
- --cnt;
- }
-
- if (!cnt)
- printk(KERN_INFO "set_clock_mmss: timed out waiting for RTC (0x%x)\n", tod_2000.cntrl1);
-
- tod_2000.second1 = real_seconds / 10;
- tod_2000.second2 = real_seconds % 10;
- tod_2000.minute1 = real_minutes / 10;
- tod_2000.minute2 = real_minutes % 10;
-
- tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
- }
-
- return 0;
-}
-
-static unsigned int amiga_get_ss(void)
-{
- unsigned int s;
-
- if (AMIGAHW_PRESENT(A3000_CLK)) {
- tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD;
- s = tod_3000.second1 * 10 + tod_3000.second2;
- tod_3000.cntrl1 = TOD3000_CNTRL1_FREE;
- } else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
- s = tod_2000.second1 * 10 + tod_2000.second2;
- }
- return s;
-}
-
static NORET_TYPE void amiga_reset(void)
ATTRIB_NORET;
diff --git a/arch/m68k/amiga/platform.c b/arch/m68k/amiga/platform.c
index 38f18bf..7fd8b41 100644
--- a/arch/m68k/amiga/platform.c
+++ b/arch/m68k/amiga/platform.c
@@ -11,6 +11,7 @@
#include <linux/zorro.h>
#include <asm/amigahw.h>
+#include <asm/amigayle.h>
#ifdef CONFIG_ZORRO
@@ -55,11 +56,77 @@
subsys_initcall(amiga_init_bus);
-#endif /* CONFIG_ZORRO */
+
+static int z_dev_present(zorro_id id)
+{
+ unsigned int i;
+
+ for (i = 0; i < zorro_num_autocon; i++)
+ if (zorro_autocon[i].rom.er_Manufacturer == ZORRO_MANUF(id) &&
+ zorro_autocon[i].rom.er_Product == ZORRO_PROD(id))
+ return 1;
+
+ return 0;
+}
+
+#else /* !CONFIG_ZORRO */
+
+static inline int z_dev_present(zorro_id id) { return 0; }
+
+#endif /* !CONFIG_ZORRO */
+
+
+static const struct resource a3000_scsi_resource __initconst = {
+ .start = 0xdd0000,
+ .end = 0xdd00ff,
+ .flags = IORESOURCE_MEM,
+};
+
+
+static const struct resource a4000t_scsi_resource __initconst = {
+ .start = 0xdd0000,
+ .end = 0xdd0fff,
+ .flags = IORESOURCE_MEM,
+};
+
+
+static const struct resource a1200_ide_resource __initconst = {
+ .start = 0xda0000,
+ .end = 0xda1fff,
+ .flags = IORESOURCE_MEM,
+};
+
+static const struct gayle_ide_platform_data a1200_ide_pdata __initconst = {
+ .base = 0xda0000,
+ .irqport = 0xda9000,
+ .explicit_ack = 1,
+};
+
+
+static const struct resource a4000_ide_resource __initconst = {
+ .start = 0xdd2000,
+ .end = 0xdd3fff,
+ .flags = IORESOURCE_MEM,
+};
+
+static const struct gayle_ide_platform_data a4000_ide_pdata __initconst = {
+ .base = 0xdd2020,
+ .irqport = 0xdd3020,
+ .explicit_ack = 0,
+};
+
+
+static const struct resource amiga_rtc_resource __initconst = {
+ .start = 0x00dc0000,
+ .end = 0x00dcffff,
+ .flags = IORESOURCE_MEM,
+};
static int __init amiga_init_devices(void)
{
+ struct platform_device *pdev;
+
if (!MACH_IS_AMIGA)
return -ENODEV;
@@ -77,6 +144,53 @@
if (AMIGAHW_PRESENT(AMI_FLOPPY))
platform_device_register_simple("amiga-floppy", -1, NULL, 0);
+ if (AMIGAHW_PRESENT(A3000_SCSI))
+ platform_device_register_simple("amiga-a3000-scsi", -1,
+ &a3000_scsi_resource, 1);
+
+ if (AMIGAHW_PRESENT(A4000_SCSI))
+ platform_device_register_simple("amiga-a4000t-scsi", -1,
+ &a4000t_scsi_resource, 1);
+
+ if (AMIGAHW_PRESENT(A1200_IDE) ||
+ z_dev_present(ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE)) {
+ pdev = platform_device_register_simple("amiga-gayle-ide", -1,
+ &a1200_ide_resource, 1);
+ platform_device_add_data(pdev, &a1200_ide_pdata,
+ sizeof(a1200_ide_pdata));
+ }
+
+ if (AMIGAHW_PRESENT(A4000_IDE)) {
+ pdev = platform_device_register_simple("amiga-gayle-ide", -1,
+ &a4000_ide_resource, 1);
+ platform_device_add_data(pdev, &a4000_ide_pdata,
+ sizeof(a4000_ide_pdata));
+ }
+
+
+ /* other I/O hardware */
+ if (AMIGAHW_PRESENT(AMI_KEYBOARD))
+ platform_device_register_simple("amiga-keyboard", -1, NULL, 0);
+
+ if (AMIGAHW_PRESENT(AMI_MOUSE))
+ platform_device_register_simple("amiga-mouse", -1, NULL, 0);
+
+ if (AMIGAHW_PRESENT(AMI_SERIAL))
+ platform_device_register_simple("amiga-serial", -1, NULL, 0);
+
+ if (AMIGAHW_PRESENT(AMI_PARALLEL))
+ platform_device_register_simple("amiga-parallel", -1, NULL, 0);
+
+
+ /* real time clocks */
+ if (AMIGAHW_PRESENT(A2000_CLK))
+ platform_device_register_simple("rtc-msm6242", -1,
+ &amiga_rtc_resource, 1);
+
+ if (AMIGAHW_PRESENT(A3000_CLK))
+ platform_device_register_simple("rtc-rp5c01", -1,
+ &amiga_rtc_resource, 1);
+
return 0;
}
diff --git a/arch/m68k/include/asm/amigayle.h b/arch/m68k/include/asm/amigayle.h
index bb5a6aa..a01453d 100644
--- a/arch/m68k/include/asm/amigayle.h
+++ b/arch/m68k/include/asm/amigayle.h
@@ -104,4 +104,10 @@
#define GAYLE_CFG_250NS 0x00
#define GAYLE_CFG_720NS 0x0c
+struct gayle_ide_platform_data {
+ unsigned long base;
+ unsigned long irqport;
+ int explicit_ack; /* A1200 IDE needs explicit ack */
+};
+
#endif /* asm-m68k/amigayle.h */
diff --git a/arch/m68k/include/asm/atomic.h b/arch/m68k/include/asm/atomic.h
index 8d29145..eab36dc 100644
--- a/arch/m68k/include/asm/atomic.h
+++ b/arch/m68k/include/asm/atomic.h
@@ -3,3 +3,5 @@
#else
#include "atomic_mm.h"
#endif
+
+#include <asm-generic/atomic64.h>
diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h
index fed3fd3..ecafbe1 100644
--- a/arch/m68k/include/asm/cache.h
+++ b/arch/m68k/include/asm/cache.h
@@ -8,4 +8,6 @@
#define L1_CACHE_SHIFT 4
#define L1_CACHE_BYTES (1<< L1_CACHE_SHIFT)
+#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+
#endif
diff --git a/arch/m68k/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist.h
index e27ad90..175da06 100644
--- a/arch/m68k/include/asm/scatterlist.h
+++ b/arch/m68k/include/asm/scatterlist.h
@@ -1,23 +1,9 @@
#ifndef _M68K_SCATTERLIST_H
#define _M68K_SCATTERLIST_H
-#include <linux/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset;
- unsigned int length;
-
- dma_addr_t dma_address; /* A place to hang host-specific addresses at. */
-};
+#include <asm-generic/scatterlist.h>
/* This is bogus and should go away. */
#define ISA_DMA_THRESHOLD (0x00ffffff)
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->length)
-
#endif /* !(_M68K_SCATTERLIST_H) */
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index 9f1784f..a91b271 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -57,7 +57,7 @@
.romvec : {
__rom_start = . ;
_romvec = .;
- *(.data.initvect)
+ *(.data..initvect)
} > romvec
#endif
@@ -68,7 +68,7 @@
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
- *(.text.lock)
+ *(.text..lock)
. = ALIGN(16); /* Exception table */
__start___ex_table = .;
diff --git a/arch/m68knommu/platform/68360/head-ram.S b/arch/m68knommu/platform/68360/head-ram.S
index 2ef0624..8eb94fb 100644
--- a/arch/m68knommu/platform/68360/head-ram.S
+++ b/arch/m68knommu/platform/68360/head-ram.S
@@ -280,7 +280,7 @@
* and then overwritten as needed.
*/
-.section ".data.initvect","awx"
+.section ".data..initvect","awx"
.long RAMEND /* Reset: Initial Stack Pointer - 0. */
.long _start /* Reset: Initial Program Counter - 1. */
.long buserr /* Bus Error - 2. */
diff --git a/arch/m68knommu/platform/68360/head-rom.S b/arch/m68knommu/platform/68360/head-rom.S
index 62ecf41..97510e5 100644
--- a/arch/m68knommu/platform/68360/head-rom.S
+++ b/arch/m68knommu/platform/68360/head-rom.S
@@ -291,7 +291,7 @@
* and then overwritten as needed.
*/
-.section ".data.initvect","awx"
+.section ".data..initvect","awx"
.long RAMEND /* Reset: Initial Stack Pointer - 0. */
.long _start /* Reset: Initial Program Counter - 1. */
.long buserr /* Bus Error - 2. */
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 76818f9..505a085 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -5,7 +5,7 @@
config MICROBLAZE
def_bool y
- select HAVE_LMB
+ select HAVE_MEMBLOCK
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
select HAVE_FUNCTION_GRAPH_TRACER
diff --git a/arch/microblaze/include/asm/lmb.h b/arch/microblaze/include/asm/lmb.h
deleted file mode 100644
index a0a0a92..0000000
--- a/arch/microblaze/include/asm/lmb.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_LMB_H
-#define _ASM_MICROBLAZE_LMB_H
-
-/* LMB limit is OFF */
-#define LMB_REAL_LIMIT 0xFFFFFFFF
-
-#endif /* _ASM_MICROBLAZE_LMB_H */
-
-
diff --git a/arch/microblaze/include/asm/memblock.h b/arch/microblaze/include/asm/memblock.h
new file mode 100644
index 0000000..f9c2fa3
--- /dev/null
+++ b/arch/microblaze/include/asm/memblock.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_MEMBLOCK_H
+#define _ASM_MICROBLAZE_MEMBLOCK_H
+
+/* MEMBLOCK limit is OFF */
+#define MEMBLOCK_REAL_LIMIT 0xFFFFFFFF
+
+#endif /* _ASM_MICROBLAZE_MEMBLOCK_H */
+
+
diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h
index de493f8..464ff32 100644
--- a/arch/microblaze/include/asm/page.h
+++ b/arch/microblaze/include/asm/page.h
@@ -34,6 +34,8 @@
/* MS be sure that SLAB allocates aligned objects */
#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_SLAB_MINALIGN L1_CACHE_BYTES
+
#define PAGE_UP(addr) (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
#define PAGE_DOWN(addr) ((addr)&(~((PAGE_SIZE)-1)))
diff --git a/arch/microblaze/include/asm/scatterlist.h b/arch/microblaze/include/asm/scatterlist.h
index 35d786f..dc4a890 100644
--- a/arch/microblaze/include/asm/scatterlist.h
+++ b/arch/microblaze/include/asm/scatterlist.h
@@ -1 +1,3 @@
#include <asm-generic/scatterlist.h>
+
+#define ISA_DMA_THRESHOLD (~0UL)
diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c
index 9dcd90b..79c7465 100644
--- a/arch/microblaze/kernel/dma.c
+++ b/arch/microblaze/kernel/dma.c
@@ -90,7 +90,6 @@
/* FIXME this part of code is untested */
for_each_sg(sgl, sg, nents, i) {
sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
- sg->dma_length = sg->length;
__dma_sync_page(page_to_phys(sg_page(sg)), sg->offset,
sg->length, direction);
}
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index a15ef6d..427b13b 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -29,7 +29,7 @@
#include <linux/kexec.h>
#include <linux/debugfs.h>
#include <linux/irq.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/prom.h>
#include <asm/page.h>
@@ -49,12 +49,12 @@
void __init early_init_dt_add_memory_arch(u64 base, u64 size)
{
- lmb_add(base, size);
+ memblock_add(base, size);
}
u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
{
- return lmb_alloc(size, align);
+ return memblock_alloc(size, align);
}
#ifdef CONFIG_EARLY_PRINTK
@@ -104,8 +104,8 @@
*/
of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
- /* Scan memory nodes and rebuild LMBs */
- lmb_init();
+ /* Scan memory nodes and rebuild MEMBLOCKs */
+ memblock_init();
of_scan_flat_dt(early_init_dt_scan_root, NULL);
of_scan_flat_dt(early_init_dt_scan_memory, NULL);
@@ -113,9 +113,9 @@
strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
parse_early_param();
- lmb_analyze();
+ memblock_analyze();
- pr_debug("Phys. mem: %lx\n", (unsigned long) lmb_phys_mem_size());
+ pr_debug("Phys. mem: %lx\n", (unsigned long) memblock_phys_mem_size());
pr_debug(" <- early_init_devtree()\n");
}
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index cca3579..db59349 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -10,7 +10,7 @@
#include <linux/bootmem.h>
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <linux/mm.h> /* mem_init */
#include <linux/initrd.h>
#include <linux/pagemap.h>
@@ -76,10 +76,10 @@
u32 kernel_align_start, kernel_align_size;
/* Find main memory where is the kernel */
- for (i = 0; i < lmb.memory.cnt; i++) {
- memory_start = (u32) lmb.memory.region[i].base;
- memory_end = (u32) lmb.memory.region[i].base
- + (u32) lmb.memory.region[i].size;
+ for (i = 0; i < memblock.memory.cnt; i++) {
+ memory_start = (u32) memblock.memory.region[i].base;
+ memory_end = (u32) memblock.memory.region[i].base
+ + (u32) memblock.memory.region[i].size;
if ((memory_start <= (u32)_text) &&
((u32)_text <= memory_end)) {
memory_size = memory_end - memory_start;
@@ -100,7 +100,7 @@
kernel_align_start = PAGE_DOWN((u32)_text);
/* ALIGN can be remove because _end in vmlinux.lds.S is align */
kernel_align_size = PAGE_UP((u32)klimit) - kernel_align_start;
- lmb_reserve(kernel_align_start, kernel_align_size);
+ memblock_reserve(kernel_align_start, kernel_align_size);
printk(KERN_INFO "%s: kernel addr=0x%08x-0x%08x size=0x%08x\n",
__func__, kernel_align_start, kernel_align_start
+ kernel_align_size, kernel_align_size);
@@ -141,18 +141,18 @@
map_size = init_bootmem_node(&contig_page_data,
PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn);
#endif
- lmb_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
+ memblock_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
/* free bootmem is whole main memory */
free_bootmem(memory_start, memory_size);
/* reserve allocate blocks */
- for (i = 0; i < lmb.reserved.cnt; i++) {
+ for (i = 0; i < memblock.reserved.cnt; i++) {
pr_debug("reserved %d - 0x%08x-0x%08x\n", i,
- (u32) lmb.reserved.region[i].base,
- (u32) lmb_size_bytes(&lmb.reserved, i));
- reserve_bootmem(lmb.reserved.region[i].base,
- lmb_size_bytes(&lmb.reserved, i) - 1, BOOTMEM_DEFAULT);
+ (u32) memblock.reserved.region[i].base,
+ (u32) memblock_size_bytes(&memblock.reserved, i));
+ reserve_bootmem(memblock.reserved.region[i].base,
+ memblock_size_bytes(&memblock.reserved, i) - 1, BOOTMEM_DEFAULT);
}
#ifdef CONFIG_MMU
init_bootmem_done = 1;
@@ -235,7 +235,7 @@
if (maxmem && memory_size > maxmem) {
memory_size = maxmem;
memory_end = memory_start + memory_size;
- lmb.memory.region[0].size = memory_size;
+ memblock.memory.region[0].size = memory_size;
}
}
}
@@ -273,19 +273,19 @@
{
unsigned int kstart, ksize;
- if (!lmb.reserved.cnt) {
+ if (!memblock.reserved.cnt) {
printk(KERN_EMERG "Error memory count\n");
machine_restart(NULL);
}
- if ((u32) lmb.memory.region[0].size < 0x1000000) {
+ if ((u32) memblock.memory.region[0].size < 0x1000000) {
printk(KERN_EMERG "Memory must be greater than 16MB\n");
machine_restart(NULL);
}
/* Find main memory where the kernel is */
- memory_start = (u32) lmb.memory.region[0].base;
- memory_end = (u32) lmb.memory.region[0].base +
- (u32) lmb.memory.region[0].size;
+ memory_start = (u32) memblock.memory.region[0].base;
+ memory_end = (u32) memblock.memory.region[0].base +
+ (u32) memblock.memory.region[0].size;
memory_size = memory_end - memory_start;
mm_cmdline_setup(); /* FIXME parse args from command line - not used */
@@ -297,7 +297,7 @@
kstart = __pa(CONFIG_KERNEL_START); /* kernel start */
/* kernel size */
ksize = PAGE_ALIGN(((u32)_end - (u32)CONFIG_KERNEL_START));
- lmb_reserve(kstart, ksize);
+ memblock_reserve(kstart, ksize);
#if defined(CONFIG_BLK_DEV_INITRD)
/* Remove the init RAM disk from the available memory. */
@@ -335,7 +335,7 @@
* Mem start + 32MB -> here is limit
* because of mem mapping from head.S
*/
- p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
+ p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
memory_start + 0x2000000));
}
return p;
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 9cb782b..23be25f 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -1277,6 +1277,7 @@
printk(KERN_WARNING "PCI: Cannot allocate resource region "
"%d of PCI bridge %d, will remap\n", i, bus->number);
clear_resource:
+ res->start = res->end = 0;
res->flags = 0;
}
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index 14eb8c4..5ef06a1 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -193,9 +193,15 @@
void au_sleep(void)
{
- save_core_regs();
- au1xxx_save_and_sleep();
- restore_core_regs();
+ int cpuid = alchemy_get_cputype();
+ if (cpuid != ALCHEMY_CPU_UNKNOWN) {
+ save_core_regs();
+ if (cpuid <= ALCHEMY_CPU_AU1500)
+ alchemy_sleep_au1000();
+ else if (cpuid <= ALCHEMY_CPU_AU1200)
+ alchemy_sleep_au1550();
+ restore_core_regs();
+ }
}
#endif /* CONFIG_PM */
diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S
index 4f4b167..77f3c74 100644
--- a/arch/mips/alchemy/common/sleeper.S
+++ b/arch/mips/alchemy/common/sleeper.S
@@ -22,10 +22,9 @@
.set noat
.align 5
-/* Save all of the processor general registers and go to sleep.
- * A wakeup condition will get us back here to restore the registers.
- */
-LEAF(au1xxx_save_and_sleep)
+
+/* preparatory stuff */
+.macro SETUP_SLEEP
subu sp, PT_SIZE
sw $1, PT_R1(sp)
sw $2, PT_R2(sp)
@@ -69,12 +68,32 @@
*/
lui t3, 0xb190 /* sys_xxx */
sw sp, 0x0018(t3)
- la k0, 3f /* resume path */
+ la k0, alchemy_sleep_wakeup /* resume path */
sw k0, 0x001c(t3)
+.endm
- /* Put SDRAM into self refresh: Preload instructions into cache,
- * issue a precharge, auto/self refresh, then sleep commands to it.
- */
+.macro DO_SLEEP
+ /* put power supply and processor to sleep */
+ sw zero, 0x0078(t3) /* sys_slppwr */
+ sync
+ sw zero, 0x007c(t3) /* sys_sleep */
+ sync
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+.endm
+
+/* sleep code for Au1000/Au1100/Au1500 memory controller type */
+LEAF(alchemy_sleep_au1000)
+
+ SETUP_SLEEP
+
+ /* cache following instructions, as memory gets put to sleep */
la t0, 1f
.set mips3
cache 0x14, 0(t0)
@@ -84,17 +103,32 @@
.set mips0
1: lui a0, 0xb400 /* mem_xxx */
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100) || \
- defined(CONFIG_SOC_AU1500)
sw zero, 0x001c(a0) /* Precharge */
sync
sw zero, 0x0020(a0) /* Auto Refresh */
sync
sw zero, 0x0030(a0) /* Sleep */
sync
-#endif
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+ DO_SLEEP
+
+END(alchemy_sleep_au1000)
+
+/* sleep code for Au1550/Au1200 memory controller type */
+LEAF(alchemy_sleep_au1550)
+
+ SETUP_SLEEP
+
+ /* cache following instructions, as memory gets put to sleep */
+ la t0, 1f
+ .set mips3
+ cache 0x14, 0(t0)
+ cache 0x14, 32(t0)
+ cache 0x14, 64(t0)
+ cache 0x14, 96(t0)
+ .set mips0
+
+1: lui a0, 0xb400 /* mem_xxx */
sw zero, 0x08c0(a0) /* Precharge */
sync
sw zero, 0x08d0(a0) /* Self Refresh */
@@ -114,26 +148,17 @@
and t1, t0, t1 /* clear CE[1:0] */
sw t1, 0x0840(a0) /* mem_sdconfiga */
sync
-#endif
- /* put power supply and processor to sleep */
- sw zero, 0x0078(t3) /* sys_slppwr */
- sync
- sw zero, 0x007c(t3) /* sys_sleep */
- sync
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
+ DO_SLEEP
+
+END(alchemy_sleep_au1550)
+
/* This is where we return upon wakeup.
* Reload all of the registers and return.
*/
-3: lw k0, 0x20(sp)
+LEAF(alchemy_sleep_wakeup)
+ lw k0, 0x20(sp)
mtc0 k0, CP0_STATUS
lw k0, 0x1c(sp)
mtc0 k0, CP0_CONTEXT
@@ -169,4 +194,4 @@
lw $31, PT_R31(sp)
jr ra
addiu sp, PT_SIZE
-END(au1xxx_save_and_sleep)
+END(alchemy_sleep_wakeup)
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index 566f2d7..8f31d1d 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -542,7 +542,7 @@
if (IS_ERR(bus_clk))
panic("unable to get bus clk\n");
- uart_port.type = PORT_16550A;
+ uart_port.type = PORT_AR7;
uart_port.uartclk = clk_get_rate(bus_clk) / 2;
uart_port.iotype = UPIO_MEM32;
uart_port.regshift = 2;
diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile
index 35294b1..7465e8a 100644
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -3,4 +3,4 @@
# under Linux.
#
-obj-y := gpio.o irq.o prom.o serial.o setup.o time.o wgt634u.o
+obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
new file mode 100644
index 0000000..06e03b2
--- /dev/null
+++ b/arch/mips/bcm47xx/nvram.c
@@ -0,0 +1,94 @@
+/*
+ * BCM947xx nvram variable access
+ *
+ * Copyright (C) 2005 Broadcom Corporation
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/ssb/ssb.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <asm/addrspace.h>
+#include <asm/mach-bcm47xx/nvram.h>
+#include <asm/mach-bcm47xx/bcm47xx.h>
+
+static char nvram_buf[NVRAM_SPACE];
+
+/* Probe for NVRAM header */
+static void __init early_nvram_init(void)
+{
+ struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+ struct nvram_header *header;
+ int i;
+ u32 base, lim, off;
+ u32 *src, *dst;
+
+ base = mcore->flash_window;
+ lim = mcore->flash_window_size;
+
+ off = FLASH_MIN;
+ while (off <= lim) {
+ /* Windowed flash access */
+ header = (struct nvram_header *)
+ KSEG1ADDR(base + off - NVRAM_SPACE);
+ if (header->magic == NVRAM_HEADER)
+ goto found;
+ off <<= 1;
+ }
+
+ /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
+ header = (struct nvram_header *) KSEG1ADDR(base + 4096);
+ if (header->magic == NVRAM_HEADER)
+ goto found;
+
+ header = (struct nvram_header *) KSEG1ADDR(base + 1024);
+ if (header->magic == NVRAM_HEADER)
+ goto found;
+
+ return;
+
+found:
+ src = (u32 *) header;
+ dst = (u32 *) nvram_buf;
+ for (i = 0; i < sizeof(struct nvram_header); i += 4)
+ *dst++ = *src++;
+ for (; i < header->len && i < NVRAM_SPACE; i += 4)
+ *dst++ = le32_to_cpu(*src++);
+}
+
+int nvram_getenv(char *name, char *val, size_t val_len)
+{
+ char *var, *value, *end, *eq;
+
+ if (!name)
+ return 1;
+
+ if (!nvram_buf[0])
+ early_nvram_init();
+
+ /* Look for name=value and return value */
+ var = &nvram_buf[sizeof(struct nvram_header)];
+ end = nvram_buf + sizeof(nvram_buf) - 2;
+ end[0] = end[1] = '\0';
+ for (; *var; var = value + strlen(value) + 1) {
+ eq = strchr(var, '=');
+ if (!eq)
+ break;
+ value = eq + 1;
+ if ((eq - var) == strlen(name) &&
+ strncmp(var, name, (eq - var)) == 0) {
+ snprintf(val, val_len, "%s", value);
+ return 0;
+ }
+ }
+ return 1;
+}
+EXPORT_SYMBOL(nvram_getenv);
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index d442e11..b1aee33 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -1,8 +1,8 @@
/*
* Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
- * Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
* Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2006 Michael Buesch <mb@bu3sch.de>
+ * Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -33,6 +33,7 @@
#include <asm/time.h>
#include <bcm47xx.h>
#include <asm/fw/cfe/cfe_api.h>
+#include <asm/mach-bcm47xx/nvram.h>
struct ssb_bus ssb_bcm47xx;
EXPORT_SYMBOL(ssb_bcm47xx);
@@ -81,28 +82,42 @@
/* Fill boardinfo structure */
memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
- if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0)
+ if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
+ nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
- if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0)
+ if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
+ nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
- if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0)
+ if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
+ nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
/* Fill sprom structure */
memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
iv->sprom.revision = 3;
- if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+ if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
+ nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
str2eaddr(buf, iv->sprom.et0mac);
- if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+
+ if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
+ nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
str2eaddr(buf, iv->sprom.et1mac);
- if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
- iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 10);
- if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
- iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 10);
- if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
+
+ if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
+ nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
+ iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
+
+ if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
+ nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
+ iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
+
+ if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
+ nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
- if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
+
+ if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
+ nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
return 0;
diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h
index f1cf389..483ffea9 100644
--- a/arch/mips/include/asm/mach-ar7/ar7.h
+++ b/arch/mips/include/asm/mach-ar7/ar7.h
@@ -50,7 +50,7 @@
#define UR8_REGS_WDT (AR7_REGS_BASE + 0x0b00)
#define UR8_REGS_UART1 (AR7_REGS_BASE + 0x0f00)
-#define AR7_RESET_PEREPHERIAL 0x0
+#define AR7_RESET_PERIPHERAL 0x0
#define AR7_RESET_SOFTWARE 0x4
#define AR7_RESET_STATUS 0x8
@@ -128,7 +128,7 @@
static inline void ar7_device_enable(u32 bit)
{
void *reset_reg =
- (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+ (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL);
writel(readl(reset_reg) | (1 << bit), reset_reg);
msleep(20);
}
@@ -136,7 +136,7 @@
static inline void ar7_device_disable(u32 bit)
{
void *reset_reg =
- (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+ (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL);
writel(readl(reset_reg) & ~(1 << bit), reset_reg);
msleep(20);
}
diff --git a/arch/mips/include/asm/mach-ar7/gpio.h b/arch/mips/include/asm/mach-ar7/gpio.h
index 73f9b16..abc317c 100644
--- a/arch/mips/include/asm/mach-ar7/gpio.h
+++ b/arch/mips/include/asm/mach-ar7/gpio.h
@@ -24,7 +24,7 @@
#define AR7_GPIO_MAX 32
#define NR_BUILTIN_GPIO AR7_GPIO_MAX
-#define gpio_to_irq(gpio) NULL
+#define gpio_to_irq(gpio) -1
#define gpio_get_value __gpio_get_value
#define gpio_set_value __gpio_set_value
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index e76941d..a697661 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -188,7 +188,8 @@
extern unsigned long au1xxx_calc_clock(void);
/* PM: arch/mips/alchemy/common/sleeper.S, power.c, irq.c */
-void au1xxx_save_and_sleep(void);
+void alchemy_sleep_au1000(void);
+void alchemy_sleep_au1550(void);
void au_sleep(void);
diff --git a/arch/mips/include/asm/mach-bcm47xx/nvram.h b/arch/mips/include/asm/mach-bcm47xx/nvram.h
new file mode 100644
index 0000000..0d8cc14
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2005, Broadcom Corporation
+ * Copyright (C) 2006, Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __NVRAM_H
+#define __NVRAM_H
+
+#include <linux/types.h>
+
+struct nvram_header {
+ u32 magic;
+ u32 len;
+ u32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:31 sdram_init */
+ u32 config_refresh; /* 0:15 sdram_config, 16:31 sdram_refresh */
+ u32 config_ncdl; /* ncdl values for memc */
+};
+
+#define NVRAM_HEADER 0x48534C46 /* 'FLSH' */
+#define NVRAM_VERSION 1
+#define NVRAM_HEADER_SIZE 20
+#define NVRAM_SPACE 0x8000
+
+#define FLASH_MIN 0x00020000 /* Minimum flash size */
+
+#define NVRAM_MAX_VALUE_LEN 255
+#define NVRAM_MAX_PARAM_LEN 64
+
+extern int nvram_getenv(char *name, char *val, size_t val_len);
+
+#endif
diff --git a/arch/mips/include/asm/mach-bcm63xx/gpio.h b/arch/mips/include/asm/mach-bcm63xx/gpio.h
index 7cda8c0..1eb534d 100644
--- a/arch/mips/include/asm/mach-bcm63xx/gpio.h
+++ b/arch/mips/include/asm/mach-bcm63xx/gpio.h
@@ -3,7 +3,7 @@
#include <bcm63xx_gpio.h>
-#define gpio_to_irq(gpio) NULL
+#define gpio_to_irq(gpio) -1
#define gpio_get_value __gpio_get_value
#define gpio_set_value __gpio_set_value
diff --git a/arch/mips/include/asm/scatterlist.h b/arch/mips/include/asm/scatterlist.h
index 83d69fe..9af65e7 100644
--- a/arch/mips/include/asm/scatterlist.h
+++ b/arch/mips/include/asm/scatterlist.h
@@ -1,27 +1,7 @@
#ifndef __ASM_SCATTERLIST_H
#define __ASM_SCATTERLIST_H
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset;
- dma_addr_t dma_address;
- unsigned int length;
-};
-
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->length)
+#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (0x00ffffffUL)
diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c
index e9e64e0..5a84a1f 100644
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@@ -2,7 +2,7 @@
* Code for replacing ftrace calls with jumps.
*
* Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
- * Copyright (C) 2009 DSLab, Lanzhou University, China
+ * Copyright (C) 2009, 2010 DSLab, Lanzhou University, China
* Author: Wu Zhangjin <wuzhangjin@gmail.com>
*
* Thanks goes to Steven Rostedt for writing the original x86 version.
@@ -12,18 +12,62 @@
#include <linux/init.h>
#include <linux/ftrace.h>
-#include <asm/cacheflush.h>
#include <asm/asm.h>
#include <asm/asm-offsets.h>
+#include <asm/cacheflush.h>
+#include <asm/uasm.h>
+
+/*
+ * If the Instruction Pointer is in module space (0xc0000000), return true;
+ * otherwise, it is in kernel space (0x80000000), return false.
+ *
+ * FIXME: This will not work when the kernel space and module space are the
+ * same. If they are the same, we need to modify scripts/recordmcount.pl,
+ * ftrace_make_nop/call() and the other related parts to ensure the
+ * enabling/disabling of the calling site to _mcount is right for both kernel
+ * and module.
+ */
+
+static inline int in_module(unsigned long ip)
+{
+ return ip & 0x40000000;
+}
#ifdef CONFIG_DYNAMIC_FTRACE
#define JAL 0x0c000000 /* jump & link: ip --> ra, jump to target */
#define ADDR_MASK 0x03ffffff /* op_code|addr : 31...26|25 ....0 */
-#define jump_insn_encode(op_code, addr) \
- ((unsigned int)((op_code) | (((addr) >> 2) & ADDR_MASK)))
-static unsigned int ftrace_nop = 0x00000000;
+#define INSN_B_1F_4 0x10000004 /* b 1f; offset = 4 */
+#define INSN_B_1F_5 0x10000005 /* b 1f; offset = 5 */
+#define INSN_NOP 0x00000000 /* nop */
+#define INSN_JAL(addr) \
+ ((unsigned int)(JAL | (((addr) >> 2) & ADDR_MASK)))
+
+static unsigned int insn_jal_ftrace_caller __read_mostly;
+static unsigned int insn_lui_v1_hi16_mcount __read_mostly;
+static unsigned int insn_j_ftrace_graph_caller __maybe_unused __read_mostly;
+
+static inline void ftrace_dyn_arch_init_insns(void)
+{
+ u32 *buf;
+ unsigned int v1;
+
+ /* lui v1, hi16_mcount */
+ v1 = 3;
+ buf = (u32 *)&insn_lui_v1_hi16_mcount;
+ UASM_i_LA_mostly(&buf, v1, MCOUNT_ADDR);
+
+ /* jal (ftrace_caller + 8), jump over the first two instruction */
+ buf = (u32 *)&insn_jal_ftrace_caller;
+ uasm_i_jal(&buf, (FTRACE_ADDR + 8));
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ /* j ftrace_graph_caller */
+ buf = (u32 *)&insn_j_ftrace_graph_caller;
+ uasm_i_j(&buf, (unsigned long)ftrace_graph_caller);
+#endif
+}
static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
{
@@ -40,67 +84,56 @@
return 0;
}
-static int lui_v1;
-static int jal_mcount;
-
int ftrace_make_nop(struct module *mod,
struct dyn_ftrace *rec, unsigned long addr)
{
unsigned int new;
- int faulted;
unsigned long ip = rec->ip;
- /* We have compiled module with -mlong-calls, but compiled the kernel
- * without it, we need to cope with them respectively. */
- if (ip & 0x40000000) {
- /* record it for ftrace_make_call */
- if (lui_v1 == 0) {
- /* lui_v1 = *(unsigned int *)ip; */
- safe_load_code(lui_v1, ip, faulted);
-
- if (unlikely(faulted))
- return -EFAULT;
- }
-
- /* lui v1, hi_16bit_of_mcount --> b 1f (0x10000004)
+ /*
+ * We have compiled module with -mlong-calls, but compiled the kernel
+ * without it, we need to cope with them respectively.
+ */
+ if (in_module(ip)) {
+#if defined(KBUILD_MCOUNT_RA_ADDRESS) && defined(CONFIG_32BIT)
+ /*
+ * lui v1, hi_16bit_of_mcount --> b 1f (0x10000005)
+ * addiu v1, v1, low_16bit_of_mcount
+ * move at, ra
+ * move $12, ra_address
+ * jalr v1
+ * sub sp, sp, 8
+ * 1: offset = 5 instructions
+ */
+ new = INSN_B_1F_5;
+#else
+ /*
+ * lui v1, hi_16bit_of_mcount --> b 1f (0x10000004)
* addiu v1, v1, low_16bit_of_mcount
* move at, ra
* jalr v1
- * nop
- * 1f: (ip + 12)
+ * nop | move $12, ra_address | sub sp, sp, 8
+ * 1: offset = 4 instructions
*/
- new = 0x10000004;
+ new = INSN_B_1F_4;
+#endif
} else {
- /* record/calculate it for ftrace_make_call */
- if (jal_mcount == 0) {
- /* We can record it directly like this:
- * jal_mcount = *(unsigned int *)ip;
- * Herein, jump over the first two nop instructions */
- jal_mcount = jump_insn_encode(JAL, (MCOUNT_ADDR + 8));
- }
-
- /* move at, ra
- * jalr v1 --> nop
+ /*
+ * move at, ra
+ * jal _mcount --> nop
*/
- new = ftrace_nop;
+ new = INSN_NOP;
}
return ftrace_modify_code(ip, new);
}
-static int modified; /* initialized as 0 by default */
-
int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
unsigned int new;
unsigned long ip = rec->ip;
- /* We just need to remove the "b ftrace_stub" at the fist time! */
- if (modified == 0) {
- modified = 1;
- ftrace_modify_code(addr, ftrace_nop);
- }
/* ip, module: 0xc0000000, kernel: 0x80000000 */
- new = (ip & 0x40000000) ? lui_v1 : jal_mcount;
+ new = in_module(ip) ? insn_lui_v1_hi16_mcount : insn_jal_ftrace_caller;
return ftrace_modify_code(ip, new);
}
@@ -111,44 +144,48 @@
{
unsigned int new;
- new = jump_insn_encode(JAL, (unsigned long)func);
+ new = INSN_JAL((unsigned long)func);
return ftrace_modify_code(FTRACE_CALL_IP, new);
}
int __init ftrace_dyn_arch_init(void *data)
{
+ /* Encode the instructions when booting */
+ ftrace_dyn_arch_init_insns();
+
+ /* Remove "b ftrace_stub" to ensure ftrace_caller() is executed */
+ ftrace_modify_code(MCOUNT_ADDR, INSN_NOP);
+
/* The return code is retured via data */
*(unsigned long *)data = 0;
return 0;
}
-#endif /* CONFIG_DYNAMIC_FTRACE */
+#endif /* CONFIG_DYNAMIC_FTRACE */
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
#ifdef CONFIG_DYNAMIC_FTRACE
extern void ftrace_graph_call(void);
-#define JMP 0x08000000 /* jump to target directly */
-#define CALL_FTRACE_GRAPH_CALLER \
- jump_insn_encode(JMP, (unsigned long)(&ftrace_graph_caller))
#define FTRACE_GRAPH_CALL_IP ((unsigned long)(&ftrace_graph_call))
int ftrace_enable_ftrace_graph_caller(void)
{
return ftrace_modify_code(FTRACE_GRAPH_CALL_IP,
- CALL_FTRACE_GRAPH_CALLER);
+ insn_j_ftrace_graph_caller);
}
int ftrace_disable_ftrace_graph_caller(void)
{
- return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, ftrace_nop);
+ return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, INSN_NOP);
}
-#endif /* !CONFIG_DYNAMIC_FTRACE */
+#endif /* CONFIG_DYNAMIC_FTRACE */
#ifndef KBUILD_MCOUNT_RA_ADDRESS
+
#define S_RA_SP (0xafbf << 16) /* s{d,w} ra, offset(sp) */
#define S_R_SP (0xafb0 << 16) /* s{d,w} R, offset(sp) */
#define OFFSET_MASK 0xffff /* stack offset range: 0 ~ PT_SIZE */
@@ -162,17 +199,17 @@
unsigned int code;
int faulted;
- /* in module or kernel? */
- if (self_addr & 0x40000000) {
- /* module: move to the instruction "lui v1, HI_16BIT_OF_MCOUNT" */
- ip = self_addr - 20;
- } else {
- /* kernel: move to the instruction "move ra, at" */
- ip = self_addr - 12;
- }
+ /*
+ * For module, move the ip from calling site of mcount to the
+ * instruction "lui v1, hi_16bit_of_mcount"(offset is 20), but for
+ * kernel, move to the instruction "move ra, at"(offset is 12)
+ */
+ ip = self_addr - (in_module(self_addr) ? 20 : 12);
- /* search the text until finding the non-store instruction or "s{d,w}
- * ra, offset(sp)" instruction */
+ /*
+ * search the text until finding the non-store instruction or "s{d,w}
+ * ra, offset(sp)" instruction
+ */
do {
ip -= 4;
@@ -181,10 +218,11 @@
if (unlikely(faulted))
return 0;
-
- /* If we hit the non-store instruction before finding where the
+ /*
+ * If we hit the non-store instruction before finding where the
* ra is stored, then this is a leaf function and it does not
- * store the ra on the stack. */
+ * store the ra on the stack
+ */
if ((code & S_R_SP) != S_R_SP)
return parent_addr;
@@ -202,7 +240,7 @@
return 0;
}
-#endif
+#endif /* !KBUILD_MCOUNT_RA_ADDRESS */
/*
* Hook the return address and push it in the stack of return addrs
@@ -220,7 +258,8 @@
if (unlikely(atomic_read(¤t->tracing_graph_pause)))
return;
- /* "parent" is the stack address saved the return address of the caller
+ /*
+ * "parent" is the stack address saved the return address of the caller
* of _mcount.
*
* if the gcc < 4.5, a leaf function does not save the return address
@@ -242,10 +281,11 @@
goto out;
#ifndef KBUILD_MCOUNT_RA_ADDRESS
parent = (unsigned long *)ftrace_get_parent_addr(self_addr, old,
- (unsigned long)parent,
- fp);
- /* If fails when getting the stack address of the non-leaf function's
- * ra, stop function graph tracer and return */
+ (unsigned long)parent, fp);
+ /*
+ * If fails when getting the stack address of the non-leaf function's
+ * ra, stop function graph tracer and return
+ */
if (parent == 0)
goto out;
#endif
@@ -272,4 +312,4 @@
ftrace_graph_stop();
WARN_ON(1);
}
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S
index 6851fc9..6bfcb7a 100644
--- a/arch/mips/kernel/mcount.S
+++ b/arch/mips/kernel/mcount.S
@@ -6,6 +6,7 @@
* more details.
*
* Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University, China
+ * Copyright (C) 2010 DSLab, Lanzhou University, China
* Author: Wu Zhangjin <wuzhangjin@gmail.com>
*/
@@ -45,8 +46,6 @@
PTR_L a5, PT_R9(sp)
PTR_L a6, PT_R10(sp)
PTR_L a7, PT_R11(sp)
-#endif
-#ifdef CONFIG_64BIT
PTR_ADDIU sp, PT_SIZE
#else
PTR_ADDIU sp, (PT_SIZE + 8)
@@ -58,6 +57,12 @@
move ra, AT
.endm
+/*
+ * The -mmcount-ra-address option of gcc 4.5 uses register $12 to pass
+ * the location of the parent's return address.
+ */
+#define MCOUNT_RA_ADDRESS_REG $12
+
#ifdef CONFIG_DYNAMIC_FTRACE
NESTED(ftrace_caller, PT_SIZE, ra)
@@ -71,14 +76,14 @@
MCOUNT_SAVE_REGS
#ifdef KBUILD_MCOUNT_RA_ADDRESS
- PTR_S t0, PT_R12(sp) /* t0 saved the location of the return address(at) by -mmcount-ra-address */
+ PTR_S MCOUNT_RA_ADDRESS_REG, PT_R12(sp)
#endif
- move a0, ra /* arg1: next ip, selfaddr */
+ move a0, ra /* arg1: self return address */
.globl ftrace_call
ftrace_call:
nop /* a placeholder for the call to a real tracing function */
- move a1, AT /* arg2: the caller's next ip, parent */
+ move a1, AT /* arg2: parent's return address */
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
.globl ftrace_graph_call
@@ -119,9 +124,9 @@
static_trace:
MCOUNT_SAVE_REGS
- move a0, ra /* arg1: next ip, selfaddr */
+ move a0, ra /* arg1: self return address */
jalr t2 /* (1) call *ftrace_trace_function */
- move a1, AT /* arg2: the caller's next ip, parent */
+ move a1, AT /* arg2: parent's return address */
MCOUNT_RESTORE_REGS
.globl ftrace_stub
@@ -134,28 +139,34 @@
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
NESTED(ftrace_graph_caller, PT_SIZE, ra)
-#ifdef CONFIG_DYNAMIC_FTRACE
- PTR_L a1, PT_R31(sp) /* load the original ra from the stack */
-#ifdef KBUILD_MCOUNT_RA_ADDRESS
- PTR_L t0, PT_R12(sp) /* load the original t0 from the stack */
-#endif
-#else
+#ifndef CONFIG_DYNAMIC_FTRACE
MCOUNT_SAVE_REGS
- move a1, ra /* arg2: next ip, selfaddr */
#endif
+ /* arg1: Get the location of the parent's return address */
#ifdef KBUILD_MCOUNT_RA_ADDRESS
- bnez t0, 1f /* non-leaf func: t0 saved the location of the return address */
- nop
- PTR_LA t0, PT_R1(sp) /* leaf func: get the location of at(old ra) from our own stack */
-1: move a0, t0 /* arg1: the location of the return address */
+#ifdef CONFIG_DYNAMIC_FTRACE
+ PTR_L a0, PT_R12(sp)
#else
- PTR_LA a0, PT_R1(sp) /* arg1: &AT -> a0 */
+ move a0, MCOUNT_RA_ADDRESS_REG
#endif
- jal prepare_ftrace_return
-#ifdef CONFIG_FRAME_POINTER
- move a2, fp /* arg3: frame pointer */
+ bnez a0, 1f /* non-leaf func: stored in MCOUNT_RA_ADDRESS_REG */
+ nop
+#endif
+ PTR_LA a0, PT_R1(sp) /* leaf func: the location in current stack */
+1:
+
+ /* arg2: Get self return address */
+#ifdef CONFIG_DYNAMIC_FTRACE
+ PTR_L a1, PT_R31(sp)
#else
+ move a1, ra
+#endif
+
+ /* arg3: Get frame pointer of current stack */
+#ifdef CONFIG_FRAME_POINTER
+ move a2, fp
+#else /* ! CONFIG_FRAME_POINTER */
#ifdef CONFIG_64BIT
PTR_LA a2, PT_SIZE(sp)
#else
@@ -163,6 +174,8 @@
#endif
#endif
+ jal prepare_ftrace_return
+ nop
MCOUNT_RESTORE_REGS
RETURN_BACK
END(ftrace_graph_caller)
diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c
index f5981c4..2340f11 100644
--- a/arch/mips/kernel/mips-mt-fpaff.c
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@@ -3,6 +3,7 @@
* Copyright (C) 2005 Mips Technologies, Inc
*/
#include <linux/cpu.h>
+#include <linux/cpuset.h>
#include <linux/cpumask.h>
#include <linux/delay.h>
#include <linux/kernel.h>
@@ -39,6 +40,21 @@
return pid ? find_task_by_vpid(pid) : current;
}
+/*
+ * check the target process has a UID that matches the current process's
+ */
+static bool check_same_owner(struct task_struct *p)
+{
+ const struct cred *cred = current_cred(), *pcred;
+ bool match;
+
+ rcu_read_lock();
+ pcred = __task_cred(p);
+ match = (cred->euid == pcred->euid ||
+ cred->euid == pcred->uid);
+ rcu_read_unlock();
+ return match;
+}
/*
* mipsmt_sys_sched_setaffinity - set the cpu affinity of a process
@@ -46,12 +62,10 @@
asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len,
unsigned long __user *user_mask_ptr)
{
- cpumask_t new_mask;
- cpumask_t effective_mask;
- int retval;
- struct task_struct *p;
+ cpumask_var_t cpus_allowed, new_mask, effective_mask;
struct thread_info *ti;
- uid_t euid;
+ struct task_struct *p;
+ int retval;
if (len < sizeof(new_mask))
return -EINVAL;
@@ -60,53 +74,74 @@
return -EFAULT;
get_online_cpus();
- read_lock(&tasklist_lock);
+ rcu_read_lock();
p = find_process_by_pid(pid);
if (!p) {
- read_unlock(&tasklist_lock);
+ rcu_read_unlock();
put_online_cpus();
return -ESRCH;
}
- /*
- * It is not safe to call set_cpus_allowed with the
- * tasklist_lock held. We will bump the task_struct's
- * usage count and drop tasklist_lock before invoking
- * set_cpus_allowed.
- */
+ /* Prevent p going away */
get_task_struct(p);
+ rcu_read_unlock();
- euid = current_euid();
- retval = -EPERM;
- if (euid != p->cred->euid && euid != p->cred->uid &&
- !capable(CAP_SYS_NICE)) {
- read_unlock(&tasklist_lock);
- goto out_unlock;
+ if (!alloc_cpumask_var(&cpus_allowed, GFP_KERNEL)) {
+ retval = -ENOMEM;
+ goto out_put_task;
}
+ if (!alloc_cpumask_var(&new_mask, GFP_KERNEL)) {
+ retval = -ENOMEM;
+ goto out_free_cpus_allowed;
+ }
+ if (!alloc_cpumask_var(&effective_mask, GFP_KERNEL)) {
+ retval = -ENOMEM;
+ goto out_free_new_mask;
+ }
+ retval = -EPERM;
+ if (!check_same_owner(p) && !capable(CAP_SYS_NICE))
+ goto out_unlock;
retval = security_task_setscheduler(p, 0, NULL);
if (retval)
goto out_unlock;
/* Record new user-specified CPU set for future reference */
- p->thread.user_cpus_allowed = new_mask;
+ cpumask_copy(&p->thread.user_cpus_allowed, new_mask);
- /* Unlock the task list */
- read_unlock(&tasklist_lock);
-
+ again:
/* Compute new global allowed CPU set if necessary */
ti = task_thread_info(p);
if (test_ti_thread_flag(ti, TIF_FPUBOUND) &&
- cpus_intersects(new_mask, mt_fpu_cpumask)) {
- cpus_and(effective_mask, new_mask, mt_fpu_cpumask);
- retval = set_cpus_allowed_ptr(p, &effective_mask);
+ cpus_intersects(*new_mask, mt_fpu_cpumask)) {
+ cpus_and(*effective_mask, *new_mask, mt_fpu_cpumask);
+ retval = set_cpus_allowed_ptr(p, effective_mask);
} else {
+ cpumask_copy(effective_mask, new_mask);
clear_ti_thread_flag(ti, TIF_FPUBOUND);
- retval = set_cpus_allowed_ptr(p, &new_mask);
+ retval = set_cpus_allowed_ptr(p, new_mask);
}
+ if (!retval) {
+ cpuset_cpus_allowed(p, cpus_allowed);
+ if (!cpumask_subset(effective_mask, cpus_allowed)) {
+ /*
+ * We must have raced with a concurrent cpuset
+ * update. Just reset the cpus_allowed to the
+ * cpuset's cpus_allowed
+ */
+ cpumask_copy(new_mask, cpus_allowed);
+ goto again;
+ }
+ }
out_unlock:
+ free_cpumask_var(effective_mask);
+out_free_new_mask:
+ free_cpumask_var(new_mask);
+out_free_cpus_allowed:
+ free_cpumask_var(cpus_allowed);
+out_put_task:
put_task_struct(p);
put_online_cpus();
return retval;
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 8bdd6a6..8527808 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -976,7 +976,7 @@
case 2:
raw_notifier_call_chain(&cu2_chain, CU2_EXCEPTION, regs);
- break;
+ return;
case 3:
break;
diff --git a/arch/mips/lasat/image/head.S b/arch/mips/lasat/image/head.S
index efb95f2..e0ecda9 100644
--- a/arch/mips/lasat/image/head.S
+++ b/arch/mips/lasat/image/head.S
@@ -1,7 +1,7 @@
#include <asm/lasat/head.h>
.text
- .section .text.start, "ax"
+ .section .text..start, "ax"
.set noreorder
.set mips3
diff --git a/arch/mips/lasat/image/romscript.normal b/arch/mips/lasat/image/romscript.normal
index 988f8ad..0864c96 100644
--- a/arch/mips/lasat/image/romscript.normal
+++ b/arch/mips/lasat/image/romscript.normal
@@ -4,7 +4,7 @@
{
.text :
{
- *(.text.start)
+ *(.text..start)
}
/* Data in ROM */
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
index 3df1967..c97ca69 100644
--- a/arch/mips/loongson/Kconfig
+++ b/arch/mips/loongson/Kconfig
@@ -23,6 +23,7 @@
select GENERIC_HARDIRQS_NO__DO_IRQ
select GENERIC_ISA_DMA_SUPPORT_BROKEN
select CPU_HAS_WB
+ select LOONGSON_MC146818
help
Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and
an FPGA northbridge
@@ -51,6 +52,7 @@
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select LOONGSON_MC146818
help
Lemote Loongson 2F family machines utilize the 2F revision of
Loongson processor and the AMD CS5536 south bridge.
@@ -83,3 +85,7 @@
bool
default y
depends on EARLY_PRINTK || SERIAL_8250
+
+config LOONGSON_MC146818
+ bool
+ default n
diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
index cdd2e81..e526488 100644
--- a/arch/mips/loongson/common/Makefile
+++ b/arch/mips/loongson/common/Makefile
@@ -12,6 +12,7 @@
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_SERIAL_8250) += serial.o
obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
+obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
#
# Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ehci.c b/arch/mips/loongson/common/cs5536/cs5536_ehci.c
index eaf8b86..5b5cbba 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ehci.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_ehci.c
@@ -49,6 +49,8 @@
lo |= SOFT_BAR_EHCI_FLAG;
_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
} else if ((value & 0x01) == 0x00) {
+ _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+ lo = value;
_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
value &= 0xfffffff0;
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ide.c b/arch/mips/loongson/common/cs5536/cs5536_ide.c
index 9a96b56..681d129 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ide.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_ide.c
@@ -51,6 +51,7 @@
lo |= SOFT_BAR_IDE_FLAG;
_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
} else if (value & 0x01) {
+ _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
lo = (value & 0xfffffff0) | 0x1;
_wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo);
@@ -65,19 +66,30 @@
_rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo);
lo |= 0x01;
_wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo);
- } else
+ } else {
+ _rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo);
+ lo = value;
_wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo);
+ }
break;
case PCI_IDE_DTC_REG:
+ _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo);
+ lo = value;
_wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo);
break;
case PCI_IDE_CAST_REG:
+ _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo);
+ lo = value;
_wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo);
break;
case PCI_IDE_ETC_REG:
+ _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
+ lo = value;
_wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo);
break;
case PCI_IDE_PM_REG:
+ _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
+ lo = value;
_wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo);
break;
default:
@@ -167,6 +179,7 @@
case PCI_IDE_ETC_REG:
_rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
conf_data = lo;
+ break;
case PCI_IDE_PM_REG:
_rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
conf_data = lo;
diff --git a/arch/mips/loongson/common/cs5536/cs5536_isa.c b/arch/mips/loongson/common/cs5536/cs5536_isa.c
index f5c0818..4d9f65a 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_isa.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_isa.c
@@ -61,7 +61,7 @@
for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
hi |= 0x01;
- _wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo);
+ _wrmsr(DIVIL_MSR_REG(offset), hi, lo);
}
}
@@ -76,7 +76,7 @@
for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
hi &= ~0x01;
- _wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo);
+ _wrmsr(DIVIL_MSR_REG(offset), hi, lo);
}
}
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ohci.c b/arch/mips/loongson/common/cs5536/cs5536_ohci.c
index db5900a..bdedf512b 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ohci.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_ohci.c
@@ -49,6 +49,8 @@
lo |= SOFT_BAR_OHCI_FLAG;
_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
} else if ((value & 0x01) == 0x00) {
+ _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
+ lo = value;
_wrmsr(USB_MSR_REG(USB_OHCI), hi, lo);
value &= 0xfffffff0;
diff --git a/arch/mips/loongson/common/rtc.c b/arch/mips/loongson/common/rtc.c
new file mode 100644
index 0000000..a90d87c
--- /dev/null
+++ b/arch/mips/loongson/common/rtc.c
@@ -0,0 +1,43 @@
+/*
+ * Lemote Fuloong platform support
+ *
+ * Copyright(c) 2010 Arnaud Patard <apatard@mandriva.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mc146818rtc.h>
+
+struct resource loongson_rtc_resources[] = {
+ {
+ .start = RTC_PORT(0),
+ .end = RTC_PORT(1),
+ .flags = IORESOURCE_IO,
+ }, {
+ .start = RTC_IRQ,
+ .end = RTC_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device loongson_rtc_device = {
+ .name = "rtc_cmos",
+ .id = -1,
+ .resource = loongson_rtc_resources,
+ .num_resources = ARRAY_SIZE(loongson_rtc_resources),
+};
+
+
+static int __init loongson_rtc_platform_init(void)
+{
+ platform_device_register(&loongson_rtc_device);
+ return 0;
+}
+
+device_initcall(loongson_rtc_platform_init);
diff --git a/arch/mips/math-emu/dp_simple.c b/arch/mips/math-emu/dp_simple.c
index d9ae1db..b909742 100644
--- a/arch/mips/math-emu/dp_simple.c
+++ b/arch/mips/math-emu/dp_simple.c
@@ -78,6 +78,7 @@
DPSIGN(x) = 0;
if (xc == IEEE754_CLASS_SNAN) {
+ SETCX(IEEE754_INVALID_OPERATION);
return ieee754dp_nanxcpt(ieee754dp_indef(), "abs");
}
diff --git a/arch/mips/math-emu/sp_simple.c b/arch/mips/math-emu/sp_simple.c
index 3175477..2fd53c9 100644
--- a/arch/mips/math-emu/sp_simple.c
+++ b/arch/mips/math-emu/sp_simple.c
@@ -78,6 +78,7 @@
SPSIGN(x) = 0;
if (xc == IEEE754_CLASS_SNAN) {
+ SETCX(IEEE754_INVALID_OPERATION);
return ieee754sp_nanxcpt(ieee754sp_indef(), "abs");
}
diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c
index d0d24e0..60d3ea6 100644
--- a/arch/mips/oprofile/op_model_loongson2.c
+++ b/arch/mips/oprofile/op_model_loongson2.c
@@ -43,6 +43,12 @@
static char *oprofid = "LoongsonPerf";
static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id);
+static void reset_counters(void *arg)
+{
+ write_c0_perfctrl(0);
+ write_c0_perfcnt(0);
+}
+
static void loongson2_reg_setup(struct op_counter_config *cfg)
{
unsigned int ctrl = 0;
@@ -139,7 +145,7 @@
static void loongson2_exit(void)
{
- write_c0_perfctrl(0);
+ reset_counters(NULL);
free_irq(LOONGSON2_PERFCNT_IRQ, oprofid);
}
diff --git a/arch/mn10300/include/asm/scatterlist.h b/arch/mn10300/include/asm/scatterlist.h
index 6753590..7bd00b9 100644
--- a/arch/mn10300/include/asm/scatterlist.h
+++ b/arch/mn10300/include/asm/scatterlist.h
@@ -11,45 +11,8 @@
#ifndef _ASM_SCATTERLIST_H
#define _ASM_SCATTERLIST_H
-#include <asm/types.h>
-
-/*
- * Drivers must set either ->address or (preferred) page and ->offset
- * to indicate where data must be transferred to/from.
- *
- * Using page is recommended since it handles highmem data as well as
- * low mem. ->address is restricted to data which has a virtual mapping, and
- * it will go away in the future. Updating to page can be automated very
- * easily -- something like
- *
- * sg->address = some_ptr;
- *
- * can be rewritten as
- *
- * sg_set_page(virt_to_page(some_ptr));
- * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK;
- *
- * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens
- */
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset; /* for highmem, page offset */
- dma_addr_t dma_address;
- unsigned int length;
-};
+#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (0x00ffffff)
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns.
- */
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->length)
-
#endif /* _ASM_SCATTERLIST_H */
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
index 53bb17d..81f153f 100644
--- a/arch/mn10300/mm/fault.c
+++ b/arch/mn10300/mm/fault.c
@@ -338,11 +338,10 @@
*/
out_of_memory:
up_read(&mm->mmap_sem);
- monitor_signal(regs);
- printk(KERN_ALERT "VM: killing process %s\n", tsk->comm);
- if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR)
- do_exit(SIGKILL);
- goto no_context;
+ if ((fault_code & MMUFCR_xFC_ACCESS) != MMUFCR_xFC_ACCESS_USR)
+ goto no_context;
+ pagefault_out_of_memory();
+ return;
do_sigbus:
up_read(&mm->mmap_sem);
diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c
index d6119b8..45b40ac 100644
--- a/arch/mn10300/unit-asb2305/pci-asb2305.c
+++ b/arch/mn10300/unit-asb2305/pci-asb2305.c
@@ -117,6 +117,7 @@
* Invalidate the resource to prevent
* child resource allocations in this
* range. */
+ r->start = r->end = 0;
r->flags = 0;
}
}
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 9c4da3d..05a366a 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -98,6 +98,9 @@
config NEED_DMA_MAP_STATE
def_bool y
+config NEED_SG_DMA_LENGTH
+ def_bool y
+
config ISA_DMA_API
bool
diff --git a/arch/parisc/include/asm/cache.h b/arch/parisc/include/asm/cache.h
index 32c2cca..45effe6 100644
--- a/arch/parisc/include/asm/cache.h
+++ b/arch/parisc/include/asm/cache.h
@@ -28,7 +28,7 @@
#define SMP_CACHE_BYTES L1_CACHE_BYTES
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
void parisc_cache_init(void); /* initializes cache-flushing */
void disable_sr_hashing_asm(int); /* low level support for above */
diff --git a/arch/parisc/include/asm/cacheflush.h b/arch/parisc/include/asm/cacheflush.h
index 4772777..4556d82 100644
--- a/arch/parisc/include/asm/cacheflush.h
+++ b/arch/parisc/include/asm/cacheflush.h
@@ -2,6 +2,7 @@
#define _PARISC_CACHEFLUSH_H
#include <linux/mm.h>
+#include <linux/uaccess.h>
/* The usual comment is "Caches aren't brain-dead on the <architecture>".
* Unfortunately, that doesn't apply to PA-RISC. */
@@ -125,11 +126,20 @@
#define kunmap(page) kunmap_parisc(page_address(page))
-#define kmap_atomic(page, idx) page_address(page)
+static inline void *kmap_atomic(struct page *page, enum km_type idx)
+{
+ pagefault_disable();
+ return page_address(page);
+}
-#define kunmap_atomic(addr, idx) kunmap_parisc(addr)
+static inline void kunmap_atomic(void *addr, enum km_type idx)
+{
+ kunmap_parisc(addr);
+ pagefault_enable();
+}
-#define kmap_atomic_pfn(pfn, idx) page_address(pfn_to_page(pfn))
+#define kmap_atomic_prot(page, idx, prot) kmap_atomic(page, idx)
+#define kmap_atomic_pfn(pfn, idx) kmap_atomic(pfn_to_page(pfn), (idx))
#define kmap_atomic_to_page(ptr) virt_to_page(ptr)
#endif
diff --git a/arch/parisc/include/asm/scatterlist.h b/arch/parisc/include/asm/scatterlist.h
index 62269b3..2c3b79b 100644
--- a/arch/parisc/include/asm/scatterlist.h
+++ b/arch/parisc/include/asm/scatterlist.h
@@ -3,25 +3,9 @@
#include <asm/page.h>
#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset;
-
- unsigned int length;
-
- /* an IOVA can be 64-bits on some PA-Risc platforms. */
- dma_addr_t iova; /* I/O Virtual Address */
- __u32 iova_length; /* bytes mapped */
-};
-
-#define sg_virt_addr(sg) ((unsigned long)sg_virt(sg))
-#define sg_dma_address(sg) ((sg)->iova)
-#define sg_dma_len(sg) ((sg)->iova_length)
+#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (~0UL)
+#define sg_virt_addr(sg) ((unsigned long)sg_virt(sg))
#endif /* _ASM_PARISC_SCATTERLIST_H */
diff --git a/arch/parisc/include/asm/system.h b/arch/parisc/include/asm/system.h
index 4653c77..2ab4af5 100644
--- a/arch/parisc/include/asm/system.h
+++ b/arch/parisc/include/asm/system.h
@@ -174,7 +174,7 @@
})
#ifdef CONFIG_SMP
-# define __lock_aligned __attribute__((__section__(".data.lock_aligned")))
+# define __lock_aligned __attribute__((__section__(".data..lock_aligned")))
#endif
#define arch_align_stack(x) (x)
diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c
index ec787b4..dcd5510 100644
--- a/arch/parisc/kernel/asm-offsets.c
+++ b/arch/parisc/kernel/asm-offsets.c
@@ -45,8 +45,12 @@
#else
#define FRAME_SIZE 64
#endif
+#define FRAME_ALIGN 64
-#define align(x,y) (((x)+FRAME_SIZE+(y)-1) - (((x)+(y)-1)%(y)))
+/* Add FRAME_SIZE to the size x and align it to y. All definitions
+ * that use align_frame will include space for a frame.
+ */
+#define align_frame(x,y) (((x)+FRAME_SIZE+(y)-1) - (((x)+(y)-1)%(y)))
int main(void)
{
@@ -146,7 +150,8 @@
DEFINE(TASK_PT_IOR, offsetof(struct task_struct, thread.regs.ior));
BLANK();
DEFINE(TASK_SZ, sizeof(struct task_struct));
- DEFINE(TASK_SZ_ALGN, align(sizeof(struct task_struct), 64));
+ /* TASK_SZ_ALGN includes space for a stack frame. */
+ DEFINE(TASK_SZ_ALGN, align_frame(sizeof(struct task_struct), FRAME_ALIGN));
BLANK();
DEFINE(PT_PSW, offsetof(struct pt_regs, gr[ 0]));
DEFINE(PT_GR1, offsetof(struct pt_regs, gr[ 1]));
@@ -233,7 +238,8 @@
DEFINE(PT_ISR, offsetof(struct pt_regs, isr));
DEFINE(PT_IOR, offsetof(struct pt_regs, ior));
DEFINE(PT_SIZE, sizeof(struct pt_regs));
- DEFINE(PT_SZ_ALGN, align(sizeof(struct pt_regs), 64));
+ /* PT_SZ_ALGN includes space for a stack frame. */
+ DEFINE(PT_SZ_ALGN, align_frame(sizeof(struct pt_regs), FRAME_ALIGN));
BLANK();
DEFINE(TI_TASK, offsetof(struct thread_info, task));
DEFINE(TI_EXEC_DOMAIN, offsetof(struct thread_info, exec_domain));
@@ -242,7 +248,8 @@
DEFINE(TI_SEGMENT, offsetof(struct thread_info, addr_limit));
DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
DEFINE(THREAD_SZ, sizeof(struct thread_info));
- DEFINE(THREAD_SZ_ALGN, align(sizeof(struct thread_info), 64));
+ /* THREAD_SZ_ALGN includes space for a stack frame. */
+ DEFINE(THREAD_SZ_ALGN, align_frame(sizeof(struct thread_info), FRAME_ALIGN));
BLANK();
DEFINE(ICACHE_BASE, offsetof(struct pdc_cache_info, ic_base));
DEFINE(ICACHE_STRIDE, offsetof(struct pdc_cache_info, ic_stride));
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index 3a44f7f..6337ade 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -364,32 +364,6 @@
.align 32
.endm
- /* The following are simple 32 vs 64 bit instruction
- * abstractions for the macros */
- .macro EXTR reg1,start,length,reg2
-#ifdef CONFIG_64BIT
- extrd,u \reg1,32+(\start),\length,\reg2
-#else
- extrw,u \reg1,\start,\length,\reg2
-#endif
- .endm
-
- .macro DEP reg1,start,length,reg2
-#ifdef CONFIG_64BIT
- depd \reg1,32+(\start),\length,\reg2
-#else
- depw \reg1,\start,\length,\reg2
-#endif
- .endm
-
- .macro DEPI val,start,length,reg
-#ifdef CONFIG_64BIT
- depdi \val,32+(\start),\length,\reg
-#else
- depwi \val,\start,\length,\reg
-#endif
- .endm
-
/* In LP64, the space contains part of the upper 32 bits of the
* fault. We have to extract this and place it in the va,
* zeroing the corresponding bits in the space register */
@@ -442,19 +416,19 @@
*/
.macro L2_ptep pmd,pte,index,va,fault
#if PT_NLEVELS == 3
- EXTR \va,31-ASM_PMD_SHIFT,ASM_BITS_PER_PMD,\index
+ extru \va,31-ASM_PMD_SHIFT,ASM_BITS_PER_PMD,\index
#else
- EXTR \va,31-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index
+ extru \va,31-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index
#endif
- DEP %r0,31,PAGE_SHIFT,\pmd /* clear offset */
+ dep %r0,31,PAGE_SHIFT,\pmd /* clear offset */
copy %r0,\pte
ldw,s \index(\pmd),\pmd
bb,>=,n \pmd,_PxD_PRESENT_BIT,\fault
- DEP %r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */
+ dep %r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */
copy \pmd,%r9
SHLREG %r9,PxD_VALUE_SHIFT,\pmd
- EXTR \va,31-PAGE_SHIFT,ASM_BITS_PER_PTE,\index
- DEP %r0,31,PAGE_SHIFT,\pmd /* clear offset */
+ extru \va,31-PAGE_SHIFT,ASM_BITS_PER_PTE,\index
+ dep %r0,31,PAGE_SHIFT,\pmd /* clear offset */
shladd \index,BITS_PER_PTE_ENTRY,\pmd,\pmd
LDREG %r0(\pmd),\pte /* pmd is now pte */
bb,>=,n \pte,_PAGE_PRESENT_BIT,\fault
@@ -605,7 +579,7 @@
depdi 0,31,32,\tmp
#endif
copy \va,\tmp1
- DEPI 0,31,23,\tmp1
+ depi 0,31,23,\tmp1
cmpb,COND(<>),n \tmp,\tmp1,\fault
ldi (_PAGE_DIRTY|_PAGE_WRITE|_PAGE_READ),\prot
depd,z \prot,8,7,\prot
@@ -997,13 +971,6 @@
rfi
nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
#ifndef CONFIG_PREEMPT
# define intr_do_preempt intr_restore
@@ -2076,9 +2043,10 @@
LDREG TASK_PT_GR31(%r1),%r31 /* restore syscall rp */
/* NOTE: We use rsm/ssm pair to make this operation atomic */
+ LDREG TASK_PT_GR30(%r1),%r1 /* Get user sp */
rsm PSW_SM_I, %r0
- LDREG TASK_PT_GR30(%r1),%r30 /* restore user sp */
- mfsp %sr3,%r1 /* Get users space id */
+ copy %r1,%r30 /* Restore user sp */
+ mfsp %sr3,%r1 /* Get user space id */
mtsp %r1,%sr7 /* Restore sr7 */
ssm PSW_SM_I, %r0
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index 0e3d9f9..4dbdf0e 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -345,7 +345,7 @@
ENDPROC(stext)
#ifndef CONFIG_64BIT
- .section .data.read_mostly
+ .section .data..read_mostly
.align 4
.export $global$,data
diff --git a/arch/parisc/kernel/init_task.c b/arch/parisc/kernel/init_task.c
index d020eae..4a91e43 100644
--- a/arch/parisc/kernel/init_task.c
+++ b/arch/parisc/kernel/init_task.c
@@ -53,11 +53,11 @@
* guarantee that global objects will be laid out in memory in the same order
* as the order of declaration, so put these in different sections and use
* the linker script to order them. */
-pmd_t pmd0[PTRS_PER_PMD] __attribute__ ((__section__ (".data.vm0.pmd"), aligned(PAGE_SIZE)));
+pmd_t pmd0[PTRS_PER_PMD] __attribute__ ((__section__ (".data..vm0.pmd"), aligned(PAGE_SIZE)));
#endif
-pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__ ((__section__ (".data.vm0.pgd"), aligned(PAGE_SIZE)));
-pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((__section__ (".data.vm0.pte"), aligned(PAGE_SIZE)));
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__ ((__section__ (".data..vm0.pgd"), aligned(PAGE_SIZE)));
+pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((__section__ (".data..vm0.pte"), aligned(PAGE_SIZE)));
/*
* Initial task structure.
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index f5f9602..68e75ce 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -47,18 +47,17 @@
KILL_INSN
.endr
- /* ADDRESS 0xb0 to 0xb4, lws uses 1 insns for entry */
+ /* ADDRESS 0xb0 to 0xb8, lws uses two insns for entry */
/* Light-weight-syscall entry must always be located at 0xb0 */
/* WARNING: Keep this number updated with table size changes */
#define __NR_lws_entries (2)
lws_entry:
- /* Unconditional branch to lws_start, located on the
- same gateway page */
- b,n lws_start
+ gate lws_start, %r0 /* increase privilege */
+ depi 3, 31, 2, %r31 /* Ensure we return into user mode. */
- /* Fill from 0xb4 to 0xe0 */
- .rept 11
+ /* Fill from 0xb8 to 0xe0 */
+ .rept 10
KILL_INSN
.endr
@@ -423,9 +422,6 @@
*********************************************************/
lws_start:
- /* Gate and ensure we return to userspace */
- gate .+8, %r0
- depi 3, 31, 2, %r31 /* Ensure we return to userspace */
#ifdef CONFIG_64BIT
/* FIXME: If we are a 64-bit kernel just
@@ -442,7 +438,7 @@
#endif
/* Is the lws entry number valid? */
- comiclr,>>= __NR_lws_entries, %r20, %r0
+ comiclr,>> __NR_lws_entries, %r20, %r0
b,n lws_exit_nosys
/* WARNING: Trashing sr2 and sr3 */
@@ -473,7 +469,7 @@
/* now reset the lowest bit of sp if it was set */
xor %r30,%r1,%r30
#endif
- be,n 0(%sr3, %r31)
+ be,n 0(%sr7, %r31)
@@ -529,7 +525,6 @@
#endif
lws_compare_and_swap:
-#ifdef CONFIG_SMP
/* Load start of lock table */
ldil L%lws_lock_start, %r20
ldo R%lws_lock_start(%r20), %r28
@@ -572,8 +567,6 @@
ldo 2(%r0), %r28 /* 2nd case */
b lws_exit /* Contended... */
ldo -EAGAIN(%r0), %r21 /* Spin in userspace */
-#endif
-/* CONFIG_SMP */
/*
prev = *addr;
@@ -601,13 +594,11 @@
1: ldw 0(%sr3,%r26), %r28
sub,<> %r28, %r25, %r0
2: stw %r24, 0(%sr3,%r26)
-#ifdef CONFIG_SMP
/* Free lock */
stw %r20, 0(%sr2,%r20)
-# if ENABLE_LWS_DEBUG
+#if ENABLE_LWS_DEBUG
/* Clear thread register indicator */
stw %r0, 4(%sr2,%r20)
-# endif
#endif
/* Return to userspace, set no error */
b lws_exit
@@ -615,12 +606,10 @@
3:
/* Error occured on load or store */
-#ifdef CONFIG_SMP
/* Free lock */
stw %r20, 0(%sr2,%r20)
-# if ENABLE_LWS_DEBUG
+#if ENABLE_LWS_DEBUG
stw %r0, 4(%sr2,%r20)
-# endif
#endif
b lws_exit
ldo -EFAULT(%r0),%r21 /* set errno */
@@ -672,7 +661,6 @@
END(sys_call_table64)
#endif
-#ifdef CONFIG_SMP
/*
All light-weight-syscall atomic operations
will use this set of locks
@@ -694,8 +682,6 @@
.endr
END(lws_lock_start)
.previous
-#endif
-/* CONFIG_SMP for lws_lock_start */
.end
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 9dab4a4..d64a6bb 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -94,8 +94,8 @@
/* PA-RISC locks requires 16-byte alignment */
. = ALIGN(16);
- .data.lock_aligned : {
- *(.data.lock_aligned)
+ .data..lock_aligned : {
+ *(.data..lock_aligned)
}
/* End of data section */
@@ -105,10 +105,10 @@
__bss_start = .;
/* page table entries need to be PAGE_SIZE aligned */
. = ALIGN(PAGE_SIZE);
- .data.vmpages : {
- *(.data.vm0.pmd)
- *(.data.vm0.pgd)
- *(.data.vm0.pte)
+ .data..vmpages : {
+ *(.data..vm0.pmd)
+ *(.data..vm0.pgd)
+ *(.data..vm0.pte)
}
.bss : {
*(.bss)
diff --git a/arch/parisc/math-emu/decode_exc.c b/arch/parisc/math-emu/decode_exc.c
index 3ca1c61..27a7492 100644
--- a/arch/parisc/math-emu/decode_exc.c
+++ b/arch/parisc/math-emu/decode_exc.c
@@ -342,6 +342,7 @@
return SIGNALCODE(SIGFPE, FPE_FLTINV);
case DIVISIONBYZEROEXCEPTION:
update_trap_counts(Fpu_register, aflags, bflags, trap_counts);
+ Clear_excp_register(exception_index);
return SIGNALCODE(SIGFPE, FPE_FLTDIV);
case INEXACTEXCEPTION:
update_trap_counts(Fpu_register, aflags, bflags, trap_counts);
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index c6afbfc..18162ce 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -264,8 +264,7 @@
out_of_memory:
up_read(&mm->mmap_sem);
- printk(KERN_CRIT "VM: killing process %s\n", current->comm);
- if (user_mode(regs))
- do_group_exit(SIGKILL);
- goto no_context;
+ if (!user_mode(regs))
+ goto no_context;
+ pagefault_out_of_memory();
}
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index c4c4549..2031a28 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -132,7 +132,7 @@
select HAVE_ARCH_KGDB
select HAVE_KRETPROBES
select HAVE_ARCH_TRACEHOOK
- select HAVE_LMB
+ select HAVE_MEMBLOCK
select HAVE_DMA_ATTRS
select HAVE_DMA_API_DEBUG
select USE_GENERIC_SMP_HELPERS if SMP
@@ -351,7 +351,7 @@
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
- depends on PPC_BOOK3S && EXPERIMENTAL
+ depends on (PPC_BOOK3S || (FSL_BOOKE && !SMP)) && EXPERIMENTAL
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
@@ -400,7 +400,7 @@
config SPARSE_IRQ
bool "Support sparse irq numbering"
- default y
+ default n
help
This enables support for sparse irqs. This is useful for distro
kernels that want to define a high CONFIG_NR_CPUS value but still
@@ -409,7 +409,7 @@
( Sparse IRQs can also be beneficial on NUMA boxes, as they spread
out the irq_desc[] array in a more NUMA-friendly way. )
- If you don't know what to do here, say Y.
+ If you don't know what to do here, say N.
config NUMA
bool "NUMA support"
@@ -663,6 +663,9 @@
config NEED_DMA_MAP_STATE
def_bool (PPC64 || NOT_COHERENT_CACHE)
+config NEED_SG_DMA_LENGTH
+ def_bool y
+
config GENERIC_ISA_DMA
bool
depends on PPC64 || POWER4 || 6xx && !CPM2
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 53696da..2d38a50 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -135,13 +135,6 @@
depends on KGDB || XMON
default y
-config IRQSTACKS
- bool "Use separate kernel stacks when processing interrupts"
- help
- If you say Y here the kernel will use separate kernel stacks
- for handling hard and soft interrupts. This can help avoid
- overflowing the process kernel stacks.
-
config VIRQ_DEBUG
bool "Expose hardware/virtual IRQ mapping via debugfs"
depends on DEBUG_FS
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 1a54a3b..77cfe7a 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -92,10 +92,10 @@
else
KBUILD_CFLAGS += $(call cc-option,-mtune=power4)
endif
-else
-LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
endif
+LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
+
ifeq ($(CONFIG_TUNE_CELL),y)
KBUILD_CFLAGS += $(call cc-option,-mtune=cell)
endif
@@ -112,6 +112,11 @@
# kernel considerably.
KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time)
+# FIXME: the module load should be taught about the additional relocs
+# generated by this.
+# revert to pre-gcc-4.4 behaviour of .eh_frame
+KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
+
# Never use string load/store instructions as they are
# often slow when they are implemented at all
KBUILD_CFLAGS += -mno-string
diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
index 27db893..9d3bd4c 100644
--- a/arch/powerpc/boot/4xx.c
+++ b/arch/powerpc/boot/4xx.c
@@ -519,7 +519,7 @@
{
unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 0);
- /* serial clocks beed fixup based on int/ext */
+ /* serial clocks need fixup based on int/ext */
eplike_fixup_uart_clk(0, "/plb/opb/serial@ef600300", ser_clk, plb_clk);
eplike_fixup_uart_clk(1, "/plb/opb/serial@ef600400", ser_clk, plb_clk);
eplike_fixup_uart_clk(2, "/plb/opb/serial@ef600500", ser_clk, plb_clk);
@@ -532,7 +532,7 @@
{
unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
- /* serial clocks beed fixup based on int/ext */
+ /* serial clocks need fixup based on int/ext */
eplike_fixup_uart_clk(0, "/plb/opb/serial@40000200", ser_clk, plb_clk);
eplike_fixup_uart_clk(1, "/plb/opb/serial@40000300", ser_clk, plb_clk);
}
@@ -543,10 +543,10 @@
{
unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
- /* serial clocks beed fixup based on int/ext */
- eplike_fixup_uart_clk(0, "/plb/opb/serial@10000200", ser_clk, plb_clk);
- eplike_fixup_uart_clk(1, "/plb/opb/serial@10000300", ser_clk, plb_clk);
- eplike_fixup_uart_clk(2, "/plb/opb/serial@10000600", ser_clk, plb_clk);
+ /* serial clocks need fixup based on int/ext */
+ eplike_fixup_uart_clk(0, "/plb/opb/serial@f0000200", ser_clk, plb_clk);
+ eplike_fixup_uart_clk(1, "/plb/opb/serial@f0000300", ser_clk, plb_clk);
+ eplike_fixup_uart_clk(2, "/plb/opb/serial@f0000600", ser_clk, plb_clk);
}
void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index ad0df7d..fae8192 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -141,7 +141,7 @@
$(obj)/wrapper.a: $(obj-wlib) FORCE
$(call if_changed,bootar)
-hostprogs-y := addnote addRamDisk hack-coff mktree
+hostprogs-y := addnote hack-coff mktree
targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
diff --git a/arch/powerpc/boot/addRamDisk.c b/arch/powerpc/boot/addRamDisk.c
deleted file mode 100644
index 893f446..0000000
--- a/arch/powerpc/boot/addRamDisk.c
+++ /dev/null
@@ -1,311 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <netinet/in.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <string.h>
-#include <elf.h>
-
-#define ElfHeaderSize (64 * 1024)
-#define ElfPages (ElfHeaderSize / 4096)
-#define KERNELBASE (0xc000000000000000)
-#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1)))
-
-struct addr_range {
- unsigned long long addr;
- unsigned long memsize;
- unsigned long offset;
-};
-
-static int check_elf64(void *p, int size, struct addr_range *r)
-{
- Elf64_Ehdr *elf64 = p;
- Elf64_Phdr *elf64ph;
-
- if (elf64->e_ident[EI_MAG0] != ELFMAG0 ||
- elf64->e_ident[EI_MAG1] != ELFMAG1 ||
- elf64->e_ident[EI_MAG2] != ELFMAG2 ||
- elf64->e_ident[EI_MAG3] != ELFMAG3 ||
- elf64->e_ident[EI_CLASS] != ELFCLASS64 ||
- elf64->e_ident[EI_DATA] != ELFDATA2MSB ||
- elf64->e_type != ET_EXEC || elf64->e_machine != EM_PPC64)
- return 0;
-
- if ((elf64->e_phoff + sizeof(Elf64_Phdr)) > size)
- return 0;
-
- elf64ph = (Elf64_Phdr *) ((unsigned long)elf64 +
- (unsigned long)elf64->e_phoff);
-
- r->memsize = (unsigned long)elf64ph->p_memsz;
- r->offset = (unsigned long)elf64ph->p_offset;
- r->addr = (unsigned long long)elf64ph->p_vaddr;
-
-#ifdef DEBUG
- printf("PPC64 ELF file, ph:\n");
- printf("p_type 0x%08x\n", elf64ph->p_type);
- printf("p_flags 0x%08x\n", elf64ph->p_flags);
- printf("p_offset 0x%016llx\n", elf64ph->p_offset);
- printf("p_vaddr 0x%016llx\n", elf64ph->p_vaddr);
- printf("p_paddr 0x%016llx\n", elf64ph->p_paddr);
- printf("p_filesz 0x%016llx\n", elf64ph->p_filesz);
- printf("p_memsz 0x%016llx\n", elf64ph->p_memsz);
- printf("p_align 0x%016llx\n", elf64ph->p_align);
- printf("... skipping 0x%08lx bytes of ELF header\n",
- (unsigned long)elf64ph->p_offset);
-#endif
-
- return 64;
-}
-static void get4k(FILE *file, char *buf )
-{
- unsigned j;
- unsigned num = fread(buf, 1, 4096, file);
- for ( j=num; j<4096; ++j )
- buf[j] = 0;
-}
-
-static void put4k(FILE *file, char *buf )
-{
- fwrite(buf, 1, 4096, file);
-}
-
-static void death(const char *msg, FILE *fdesc, const char *fname)
-{
- fprintf(stderr, msg);
- fclose(fdesc);
- unlink(fname);
- exit(1);
-}
-
-int main(int argc, char **argv)
-{
- char inbuf[4096];
- struct addr_range vmlinux;
- FILE *ramDisk;
- FILE *inputVmlinux;
- FILE *outputVmlinux;
-
- char *rd_name, *lx_name, *out_name;
-
- size_t i;
- unsigned long ramFileLen;
- unsigned long ramLen;
- unsigned long roundR;
- unsigned long offset_end;
-
- unsigned long kernelLen;
- unsigned long actualKernelLen;
- unsigned long round;
- unsigned long roundedKernelLen;
- unsigned long ramStartOffs;
- unsigned long ramPages;
- unsigned long roundedKernelPages;
- unsigned long hvReleaseData;
- u_int32_t eyeCatcher = 0xc8a5d9c4;
- unsigned long naca;
- unsigned long xRamDisk;
- unsigned long xRamDiskSize;
- long padPages;
-
-
- if (argc < 2) {
- fprintf(stderr, "Name of RAM disk file missing.\n");
- exit(1);
- }
- rd_name = argv[1];
-
- if (argc < 3) {
- fprintf(stderr, "Name of vmlinux file missing.\n");
- exit(1);
- }
- lx_name = argv[2];
-
- if (argc < 4) {
- fprintf(stderr, "Name of vmlinux output file missing.\n");
- exit(1);
- }
- out_name = argv[3];
-
-
- ramDisk = fopen(rd_name, "r");
- if ( ! ramDisk ) {
- fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", rd_name);
- exit(1);
- }
-
- inputVmlinux = fopen(lx_name, "r");
- if ( ! inputVmlinux ) {
- fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", lx_name);
- exit(1);
- }
-
- outputVmlinux = fopen(out_name, "w+");
- if ( ! outputVmlinux ) {
- fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", out_name);
- exit(1);
- }
-
- i = fread(inbuf, 1, sizeof(inbuf), inputVmlinux);
- if (i != sizeof(inbuf)) {
- fprintf(stderr, "can not read vmlinux file %s: %u\n", lx_name, i);
- exit(1);
- }
-
- i = check_elf64(inbuf, sizeof(inbuf), &vmlinux);
- if (i == 0) {
- fprintf(stderr, "You must have a linux kernel specified as argv[2]\n");
- exit(1);
- }
-
- /* Input Vmlinux file */
- fseek(inputVmlinux, 0, SEEK_END);
- kernelLen = ftell(inputVmlinux);
- fseek(inputVmlinux, 0, SEEK_SET);
- printf("kernel file size = %lu\n", kernelLen);
-
- actualKernelLen = kernelLen - ElfHeaderSize;
-
- printf("actual kernel length (minus ELF header) = %lu\n", actualKernelLen);
-
- round = actualKernelLen % 4096;
- roundedKernelLen = actualKernelLen;
- if ( round )
- roundedKernelLen += (4096 - round);
- printf("Vmlinux length rounded up to a 4k multiple = %ld/0x%lx \n", roundedKernelLen, roundedKernelLen);
- roundedKernelPages = roundedKernelLen / 4096;
- printf("Vmlinux pages to copy = %ld/0x%lx \n", roundedKernelPages, roundedKernelPages);
-
- offset_end = _ALIGN_UP(vmlinux.memsize, 4096);
- /* calc how many pages we need to insert between the vmlinux and the start of the ram disk */
- padPages = offset_end/4096 - roundedKernelPages;
-
- /* Check and see if the vmlinux is already larger than _end in System.map */
- if (padPages < 0) {
- /* vmlinux is larger than _end - adjust the offset to the start of the embedded ram disk */
- offset_end = roundedKernelLen;
- printf("vmlinux is larger than _end indicates it needs to be - offset_end = %lx \n", offset_end);
- padPages = 0;
- printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages);
- }
- else {
- /* _end is larger than vmlinux - use the offset to _end that we calculated from the system map */
- printf("vmlinux is smaller than _end indicates is needed - offset_end = %lx \n", offset_end);
- printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages);
- }
-
-
-
- /* Input Ram Disk file */
- // Set the offset that the ram disk will be started at.
- ramStartOffs = offset_end; /* determined from the input vmlinux file and the system map */
- printf("Ram Disk will start at offset = 0x%lx \n", ramStartOffs);
-
- fseek(ramDisk, 0, SEEK_END);
- ramFileLen = ftell(ramDisk);
- fseek(ramDisk, 0, SEEK_SET);
- printf("%s file size = %ld/0x%lx \n", rd_name, ramFileLen, ramFileLen);
-
- ramLen = ramFileLen;
-
- roundR = 4096 - (ramLen % 4096);
- if ( roundR ) {
- printf("Rounding RAM disk file up to a multiple of 4096, adding %ld/0x%lx \n", roundR, roundR);
- ramLen += roundR;
- }
-
- printf("Rounded RAM disk size is %ld/0x%lx \n", ramLen, ramLen);
- ramPages = ramLen / 4096;
- printf("RAM disk pages to copy = %ld/0x%lx\n", ramPages, ramPages);
-
-
-
- // Copy 64K ELF header
- for (i=0; i<(ElfPages); ++i) {
- get4k( inputVmlinux, inbuf );
- put4k( outputVmlinux, inbuf );
- }
-
- /* Copy the vmlinux (as full pages). */
- fseek(inputVmlinux, ElfHeaderSize, SEEK_SET);
- for ( i=0; i<roundedKernelPages; ++i ) {
- get4k( inputVmlinux, inbuf );
- put4k( outputVmlinux, inbuf );
- }
-
- /* Insert pad pages (if appropriate) that are needed between */
- /* | the end of the vmlinux and the ram disk. */
- for (i=0; i<padPages; ++i) {
- memset(inbuf, 0, 4096);
- put4k(outputVmlinux, inbuf);
- }
-
- /* Copy the ram disk (as full pages). */
- for ( i=0; i<ramPages; ++i ) {
- get4k( ramDisk, inbuf );
- put4k( outputVmlinux, inbuf );
- }
-
- /* Close the input files */
- fclose(ramDisk);
- fclose(inputVmlinux);
- /* And flush the written output file */
- fflush(outputVmlinux);
-
-
-
- /* Fixup the new vmlinux to contain the ram disk starting offset (xRamDisk) and the ram disk size (xRamDiskSize) */
- /* fseek to the hvReleaseData pointer */
- fseek(outputVmlinux, ElfHeaderSize + 0x24, SEEK_SET);
- if (fread(&hvReleaseData, 4, 1, outputVmlinux) != 1) {
- death("Could not read hvReleaseData pointer\n", outputVmlinux, out_name);
- }
- hvReleaseData = ntohl(hvReleaseData); /* Convert to native int */
- printf("hvReleaseData is at %08lx\n", hvReleaseData);
-
- /* fseek to the hvReleaseData */
- fseek(outputVmlinux, ElfHeaderSize + hvReleaseData, SEEK_SET);
- if (fread(inbuf, 0x40, 1, outputVmlinux) != 1) {
- death("Could not read hvReleaseData\n", outputVmlinux, out_name);
- }
- /* Check hvReleaseData sanity */
- if (memcmp(inbuf, &eyeCatcher, 4) != 0) {
- death("hvReleaseData is invalid\n", outputVmlinux, out_name);
- }
- /* Get the naca pointer */
- naca = ntohl(*((u_int32_t*) &inbuf[0x0C])) - KERNELBASE;
- printf("Naca is at offset 0x%lx \n", naca);
-
- /* fseek to the naca */
- fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
- if (fread(inbuf, 0x18, 1, outputVmlinux) != 1) {
- death("Could not read naca\n", outputVmlinux, out_name);
- }
- xRamDisk = ntohl(*((u_int32_t *) &inbuf[0x0c]));
- xRamDiskSize = ntohl(*((u_int32_t *) &inbuf[0x14]));
- /* Make sure a RAM disk isn't already present */
- if ((xRamDisk != 0) || (xRamDiskSize != 0)) {
- death("RAM disk is already attached to this kernel\n", outputVmlinux, out_name);
- }
- /* Fill in the values */
- *((u_int32_t *) &inbuf[0x0c]) = htonl(ramStartOffs);
- *((u_int32_t *) &inbuf[0x14]) = htonl(ramPages);
-
- /* Write out the new naca */
- fflush(outputVmlinux);
- fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
- if (fwrite(inbuf, 0x18, 1, outputVmlinux) != 1) {
- death("Could not write naca\n", outputVmlinux, out_name);
- }
- printf("Ram Disk of 0x%lx pages is attached to the kernel at offset 0x%08lx\n",
- ramPages, ramStartOffs);
-
- /* Done */
- fclose(outputVmlinux);
- /* Set permission to executable */
- chmod(out_name, S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH);
-
- return 0;
-}
-
diff --git a/arch/powerpc/boot/dts/icon.dts b/arch/powerpc/boot/dts/icon.dts
new file mode 100644
index 0000000..abcd0ca
--- /dev/null
+++ b/arch/powerpc/boot/dts/icon.dts
@@ -0,0 +1,447 @@
+/*
+ * Device Tree Source for Mosaix Technologies, Inc. ICON board
+ *
+ * Copyright 2010 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "mosaixtech,icon";
+ compatible = "mosaixtech,icon";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ serial2 = &UART2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,440SPe";
+ reg = <0x00000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ reset-type = <2>; /* Use chip-reset */
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-440spe","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-440spe","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0x0d0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-440spe","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0x0e0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic-440spe","ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0x0f0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-440spe";
+ dcr-reg = <0x00e 0x002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-440spe";
+ dcr-reg = <0x00c 0x002>;
+ };
+
+ MQ0: mq {
+ compatible = "ibm,mq-440spe";
+ dcr-reg = <0x040 0x020>;
+ };
+
+ plb {
+ compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ /* addr-child addr-parent size */
+ ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000
+ 0x4 0x00200000 0x4 0x00200000 0x00000400
+ 0x4 0xe0000000 0x4 0xe0000000 0x20000000
+ 0xc 0x00000000 0xc 0x00000000 0x20000000
+ 0xd 0x00000000 0xd 0x00000000 0x80000000
+ 0xd 0x80000000 0xd 0x80000000 0x80000000
+ 0xe 0x00000000 0xe 0x00000000 0x80000000
+ 0xe 0x80000000 0xe 0x80000000 0x80000000
+ 0xf 0x00000000 0xf 0x00000000 0x80000000
+ 0xf 0x80000000 0xf 0x80000000 0x80000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
+ dcr-reg = <0x010 0x002>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
+ dcr-reg = <0x180 0x062>;
+ num-tx-chans = <2>;
+ num-rx-chans = <1>;
+ interrupt-parent = <&MAL0>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
+ /*RXEOB*/ 0x1 &UIC1 0x7 0x4
+ /*SERR*/ 0x2 &UIC1 0x1 0x4
+ /*TXDE*/ 0x3 &UIC1 0x2 0x4
+ /*RXDE*/ 0x4 &UIC1 0x3 0x4>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
+ dcr-reg = <0x012 0x002>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ /* ranges property is supplied by U-Boot */
+ interrupts = <0x5 0x1>;
+ interrupt-parent = <&UIC1>;
+
+ nor_flash@0,0 {
+ compatible = "cfi-flash";
+ bank-width = <2>;
+ reg = <0x00000000 0x00000000 0x01000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x001e0000>;
+ };
+ partition@1e0000 {
+ label = "dtb";
+ reg = <0x001e0000 0x00020000>;
+ };
+ partition@200000 {
+ label = "root";
+ reg = <0x00200000 0x00200000>;
+ };
+ partition@400000 {
+ label = "user";
+ reg = <0x00400000 0x00b60000>;
+ };
+ partition@f60000 {
+ label = "env";
+ reg = <0x00f60000 0x00040000>;
+ };
+ partition@fa0000 {
+ label = "u-boot";
+ reg = <0x00fa0000 0x00060000>;
+ };
+ };
+
+ SysACE_CompactFlash: sysace@1,0 {
+ compatible = "xlnx,sysace";
+ interrupt-parent = <&UIC2>;
+ interrupts = <24 0x4>;
+ reg = <0x00000001 0x00000000 0x10000>;
+ };
+ };
+
+ UART0: serial@f0000200 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xf0000200 0x00000008>;
+ virtual-reg = <0xa0000200>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <115200>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x0 0x4>;
+ };
+
+ UART1: serial@f0000300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xf0000300 0x00000008>;
+ virtual-reg = <0xa0000300>;
+ clock-frequency = <0>;
+ current-speed = <0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x1 0x4>;
+ };
+
+
+ UART2: serial@f0000600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xf0000600 0x00000008>;
+ virtual-reg = <0xa0000600>;
+ clock-frequency = <0>;
+ current-speed = <0>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x5 0x4>;
+ };
+
+ IIC0: i2c@f0000400 {
+ compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+ reg = <0xf0000400 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x2 0x4>;
+ };
+
+ IIC1: i2c@f0000500 {
+ compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+ reg = <0xf0000500 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x3 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@68 {
+ compatible = "stm,m41t00";
+ reg = <0x68>;
+ };
+ };
+
+ EMAC0: ethernet@f0000800 {
+ linux,network-index = <0x0>;
+ device_type = "network";
+ compatible = "ibm,emac-440spe", "ibm,emac4";
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x1c 0x4 0x1d 0x4>;
+ reg = <0xf0000800 0x00000074>;
+ local-mac-address = [000000000000];
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ phy-mode = "gmii";
+ phy-map = <0x00000000>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+ };
+
+ PCIX0: pci@c0ec00000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix";
+ primary;
+ large-inbound-windows;
+ enable-msi-hole;
+ reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */
+ 0x00000000 0x00000000 0x00000000 /* no IACK cycles */
+ 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */
+ 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */
+ 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+ /* Inbound 4GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* PCI-X interrupt (SM502) is routed to extIRQ10 (UIC1, 19) */
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &UIC1 19 0x8>;
+ };
+
+ PCIE0: pciex@d00000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+ primary;
+ port = <0x0>; /* port number */
+ reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
+ 0x0000000c 0x10000000 0x00001000>; /* Registers */
+ dcr-reg = <0x100 0x020>;
+ sdr-base = <0x300>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+ /* Inbound 4GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+ /* This drives busses 0x10 to 0x1f */
+ bus-range = <0x10 0x1f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
+ };
+
+ PCIE1: pciex@d20000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+ primary;
+ port = <0x1>; /* port number */
+ reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */
+ 0x0000000c 0x10001000 0x00001000>; /* Registers */
+ dcr-reg = <0x120 0x020>;
+ sdr-base = <0x340>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+ /* Inbound 4GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+ /* This drives busses 0x20 to 0x2f */
+ bus-range = <0x20 0x2f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
+ };
+
+ I2O: i2o@400100000 {
+ compatible = "ibm,i2o-440spe";
+ reg = <0x00000004 0x00100000 0x100>;
+ dcr-reg = <0x060 0x020>;
+ };
+
+ DMA0: dma0@400100100 {
+ compatible = "ibm,dma-440spe";
+ cell-index = <0>;
+ reg = <0x00000004 0x00100100 0x100>;
+ dcr-reg = <0x060 0x020>;
+ interrupt-parent = <&DMA0>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <
+ 0 &UIC0 0x14 4
+ 1 &UIC1 0x16 4>;
+ };
+
+ DMA1: dma1@400100200 {
+ compatible = "ibm,dma-440spe";
+ cell-index = <1>;
+ reg = <0x00000004 0x00100200 0x100>;
+ dcr-reg = <0x060 0x020>;
+ interrupt-parent = <&DMA1>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <
+ 0 &UIC0 0x16 4
+ 1 &UIC1 0x16 4>;
+ };
+
+ xor-accel@400200000 {
+ compatible = "amcc,xor-accelerator";
+ reg = <0x00000004 0x00200000 0x400>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x1f 4>;
+ };
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@f0000200";
+ };
+};
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index 8cf2c0c..7c3be5e 100644
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -44,6 +44,7 @@
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
+ reset-type = <2>; /* Use chip-reset */
};
};
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 82ff2b1..179a178 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -134,12 +134,16 @@
compatible = "fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
interrupts = <1 7 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
gpio@c00 {
compatible = "fsl,mpc5200-gpio-wkup";
reg = <0xc00 0x40>;
interrupts = <1 8 0 0 3 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
spi@f00 {
@@ -230,8 +234,8 @@
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
- phy0: ethernet-phy@1 {
- reg = <1>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
};
};
@@ -255,7 +259,13 @@
compatible = "fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
};
+
sram@8000 {
compatible = "fsl,mpc5200-sram";
reg = <0x8000 0x4000>;
@@ -281,4 +291,18 @@
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
};
+
+ localbus {
+ compatible = "fsl,mpc5200-lpb","simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0xff000000 0x01000000>;
+
+ flash@0,0 {
+ compatible = "amd,am29lv652d", "cfi-flash";
+ reg = <0 0 0x01000000>;
+ bank-width = <1>;
+ };
+ };
};
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index e45a63b..59702ac 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -259,6 +259,11 @@
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
};
sram@8000 {
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 4173af3..0f52624 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -20,10 +20,8 @@
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
-/*
ethernet2 = &enet2;
ethernet3 = &enet3;
-*/
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
@@ -254,7 +252,6 @@
};
};
-/* eTSEC 3/4 are currently broken
enet2: ethernet@26000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -310,7 +307,6 @@
};
};
};
- */
serial0: serial@4500 {
cell-index = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
index 5bd1011..3375c2a 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
@@ -215,6 +215,18 @@
clock-frequency = <0>;
};
+ msi@41600 {
+ compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x80>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0>;
+ interrupt-parent = <&mpic>;
+ };
+
global-utilities@e0000 { //global utilities block
compatible = "fsl,mpc8572-guts";
reg = <0xe0000 0x1000>;
@@ -243,8 +255,7 @@
protected-sources = <
31 32 33 37 38 39 /* enet2 enet3 */
76 77 78 79 26 42 /* dma2 pci2 serial*/
- 0xe0 0xe1 0xe2 0xe3 /* msi */
- 0xe4 0xe5 0xe6 0xe7
+ 0xe4 0xe5 0xe6 0xe7 /* msi */
>;
};
};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
index 0efc345..e7b477f 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
@@ -154,12 +154,8 @@
msi@41600 {
compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
+ msi-available-ranges = <0x80 0x80>;
interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
0xe4 0
0xe5 0
0xe6 0
@@ -190,6 +186,7 @@
0x1 0x2 0x3 0x4 /* pci slot */
0x9 0xa 0xb 0xc /* usb */
0x6 0x7 0xe 0x5 /* Audio elgacy SATA */
+ 0xe0 0xe1 0xe2 0xe3 /* msi */
>;
};
};
diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts
new file mode 100644
index 0000000..7fad2df
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1021mds.dts
@@ -0,0 +1,698 @@
+/*
+ * P1021 MDS Device Tree Source
+ *
+ * Copyright 2010 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+ model = "fsl,P1021";
+ compatible = "fsl,P1021MDS";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ ethernet4 = &enet4;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1021@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1021@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ localbus@ffe05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
+ reg = <0 0xffe05000 0 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+
+ /* NAND Flash, BCSR, PMC0/1*/
+ ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
+ 0x1 0x0 0x0 0xf8000000 0x00008000
+ 0x2 0x0 0x0 0xf8010000 0x00020000
+ 0x3 0x0 0x0 0xf8020000 0x00020000>;
+
+ nand@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1021-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x0 0x0 0x40000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND (RO) DTB Image";
+ read-only;
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@600000 {
+ /* 5MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00500000>;
+ label = "NAND (RO) Compressed RFS Image";
+ read-only;
+ };
+
+ partition@b00000 {
+ /* 6MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00600000>;
+ label = "NAND (RW) JFFS2 Root File System";
+ };
+
+ partition@1100000 {
+ /* 14MB for JFFS2 based Root file System */
+ reg = <0x01100000 0x00e00000>;
+ label = "NAND (RW) Writable User area";
+ };
+
+ partition@1f00000 {
+ /* 1MB for microcode */
+ reg = <0x01f00000 0x00100000>;
+ label = "NAND (RO) QE Ucode";
+ read-only;
+ };
+ };
+
+ bcsr@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1021mds-bcsr";
+ reg = <1 0 0x8000>;
+ ranges = <0 1 0 0x8000>;
+ };
+
+ pib@2,0 {
+ compatible = "fsl,p1021mds-pib";
+ reg = <2 0 0x10000>;
+ };
+
+ pib@3,0 {
+ compatible = "fsl,p1021mds-pib";
+ reg = <3 0 0x10000>;
+ };
+ };
+
+ soc@ffe00000 {
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1021-immr", "simple-bus";
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1021-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1021-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ spi@7000 {
+ cell-index = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,espi";
+ reg = <0x7000 0x1000>;
+ interrupts = <59 0x2>;
+ interrupt-parent = <&mpic>;
+ espi,num-ss-bits = <4>;
+ mode = "cpu";
+
+ fsl_m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,espi-flash";
+ reg = <0>;
+ linux,modalias = "fsl_m25p80";
+ spi-max-frequency = <40000000>; /* input clock */
+ partition@u-boot {
+ label = "u-boot-spi";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+ partition@kernel {
+ label = "kernel-spi";
+ reg = <0x00100000 0x00500000>;
+ read-only;
+ };
+ partition@dtb {
+ label = "dtb-spi";
+ reg = <0x00600000 0x00100000>;
+ read-only;
+ };
+ partition@fs {
+ label = "file system-spi";
+ reg = <0x00700000 0x00900000>;
+ };
+ };
+ };
+
+ gpio: gpio-controller@f000 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8572-gpio";
+ reg = <0xf000 0x100>;
+ interrupts = <47 0x2>;
+ interrupt-parent = <&mpic>;
+ gpio-controller;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1021-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ usb@22000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-usb2-dr";
+ reg = <0x22000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <28 0x2>;
+ phy_type = "ulpi";
+ };
+
+ mdio@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-mdio";
+ reg = <0x24000 0x1000 0xb0030 0x4>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <1 1>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <2 1>;
+ reg = <0x1>;
+ };
+ phy4: ethernet-phy@4 {
+ interrupt-parent = <&mpic>;
+ reg = <0x4>;
+ };
+ };
+
+ mdio@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-tbi";
+ reg = <0x25000 0x1000 0xb1030 0x4>;
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@B0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ queue-group@0{
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xB0000 0x1000>;
+ interrupts = <29 2 30 2 34 2>;
+ };
+ queue-group@1{
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xB4000 0x1000>;
+ interrupts = <17 2 18 2 24 2>;
+ };
+ };
+
+ enet1: ethernet@B1000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy4>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ queue-group@0{
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xB1000 0x1000>;
+ interrupts = <35 2 36 2 40 2>;
+ };
+ queue-group@1{
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xB5000 0x1000>;
+ interrupts = <51 2 52 2 67 2>;
+ };
+ };
+
+ enet2: ethernet@B2000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ queue-group@0{
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xB2000 0x1000>;
+ interrupts = <31 2 32 2 33 2>;
+ };
+ queue-group@1{
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xB6000 0x1000>;
+ interrupts = <25 2 26 2 27 2>;
+ };
+ };
+
+ sdhci@2e000 {
+ compatible = "fsl,p1021-esdhc", "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <72 0x2>;
+ interrupt-parent = <&mpic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+
+ crypto@30000 {
+ compatible = "fsl,sec3.3", "fsl,sec3.1",
+ "fsl,sec3.0", "fsl,sec2.4",
+ "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 58 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x97c>;
+ fsl,descriptor-types-mask = <0x3a30abf>;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ msi@41600 {
+ compatible = "fsl,p1021-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ global-utilities@e0000 { //global utilities block
+ compatible = "fsl,p1021-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+
+ par_io@e0100 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xe0100 0x60>;
+ ranges = <0x0 0xe0100 0x60>;
+ device_type = "par_io";
+ num-ports = <3>;
+ pio1: ucc_pin@01 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
+ 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
+ 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */
+ 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9
+*/
+ 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */
+ 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */
+ 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */
+ 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */
+ 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */
+ 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */
+ 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */
+ 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */
+ 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */
+ 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */
+ 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */
+ 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */
+ 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */
+ 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */
+ };
+
+ pio2: ucc_pin@02 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
+ 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
+ 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */
+ 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */
+ 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */
+ 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */
+ 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */
+ 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */
+ 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */
+ 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */
+ };
+ };
+ };
+
+ pci0: pcie@ffe09000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe09000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 4 1
+ 0000 0 0 2 &mpic 5 1
+ 0000 0 0 3 &mpic 6 1
+ 0000 0 0 4 &mpic 7 1
+ >;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@ffe0a000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe0a000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 0 1
+ 0000 0 0 2 &mpic 1 1
+ 0000 0 0 3 &mpic 2 1
+ 0000 0 0 4 &mpic 3 1
+ >;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ qe@ffe80000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe";
+ ranges = <0x0 0x0 0xffe80000 0x40000>;
+ reg = <0 0xffe80000 0 0x480>;
+ brg-frequency = <0>;
+ bus-frequency = <0>;
+ fsl,qe-num-riscs = <1>;
+ fsl,qe-num-snums = <28>;
+
+ qeic: interrupt-controller@80 {
+ interrupt-controller;
+ compatible = "fsl,qe-ic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>;
+ interrupts = <63 2 60 2>; //high:47 low:44
+ interrupt-parent = <&mpic>;
+ };
+
+ enet3: ucc@2000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ rx-clock-name = "clk12";
+ tx-clock-name = "clk9";
+ pio-handle = <&pio1>;
+ phy-handle = <&qe_phy0>;
+ phy-connection-type = "mii";
+ };
+
+ mdio@2120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2120 0x18>;
+ compatible = "fsl,ucc-mdio";
+
+ qe_phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <4 1>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ qe_phy1: ethernet-phy@03 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet4: ucc@2400 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ cell-index = <5>;
+ reg = <0x2400 0x200>;
+ interrupts = <40>;
+ interrupt-parent = <&qeic>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ rx-clock-name = "none";
+ tx-clock-name = "clk13";
+ pio-handle = <&pio2>;
+ phy-handle = <&qe_phy1>;
+ phy-connection-type = "rmii";
+ };
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x6000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0x0 0x6000>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/redwood.dts b/arch/powerpc/boot/dts/redwood.dts
index d2af32e..81636c0 100644
--- a/arch/powerpc/boot/dts/redwood.dts
+++ b/arch/powerpc/boot/dts/redwood.dts
@@ -234,10 +234,132 @@
has-inverted-stacr-oc;
has-new-stacr-staopc;
};
+ };
+ PCIE0: pciex@d00000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+ primary;
+ port = <0x0>; /* port number */
+ reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
+ 0x0000000c 0x10000000 0x00001000>; /* Registers */
+ dcr-reg = <0x100 0x020>;
+ sdr-base = <0x300>;
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+ /* This drives busses 10 to 0x1f */
+ bus-range = <0x10 0x1f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
+ };
+
+ PCIE1: pciex@d20000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+ primary;
+ port = <0x1>; /* port number */
+ reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */
+ 0x0000000c 0x10001000 0x00001000>; /* Registers */
+ dcr-reg = <0x120 0x020>;
+ sdr-base = <0x340>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+ /* This drives busses 10 to 0x1f */
+ bus-range = <0x20 0x2f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
+ };
+
+ PCIE2: pciex@d40000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+ primary;
+ port = <0x2>; /* port number */
+ reg = <0x0000000d 0x40000000 0x20000000 /* Config space access */
+ 0x0000000c 0x10002000 0x00001000>; /* Registers */
+ dcr-reg = <0x140 0x020>;
+ sdr-base = <0x370>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+ /* This drives busses 10 to 0x1f */
+ bus-range = <0x30 0x3f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
};
};
+
chosen {
linux,stdout-path = "/plb/opb/serial@ef600200";
};
diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig
index 8e95f8d..4aa17b6 100644
--- a/arch/powerpc/configs/40x/acadia_defconfig
+++ b/arch/powerpc/configs/40x/acadia_defconfig
@@ -98,8 +98,7 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig
index 918f23f..9a5f1ab 100644
--- a/arch/powerpc/configs/40x/ep405_defconfig
+++ b/arch/powerpc/configs/40x/ep405_defconfig
@@ -98,8 +98,7 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig
index f87ef03..0b45213 100644
--- a/arch/powerpc/configs/40x/hcu4_defconfig
+++ b/arch/powerpc/configs/40x/hcu4_defconfig
@@ -98,8 +98,7 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index 19fbcb0..4d2de0b 100644
--- a/arch/powerpc/configs/40x/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
@@ -98,8 +98,7 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig
index eb41cd6..a1f3f50 100644
--- a/arch/powerpc/configs/40x/makalu_defconfig
+++ b/arch/powerpc/configs/40x/makalu_defconfig
@@ -98,8 +98,7 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig
index 416e79a..c763135 100644
--- a/arch/powerpc/configs/40x/virtex_defconfig
+++ b/arch/powerpc/configs/40x/virtex_defconfig
@@ -77,8 +77,7 @@
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig
index bfff0ea..6597b2f 100644
--- a/arch/powerpc/configs/40x/walnut_defconfig
+++ b/arch/powerpc/configs/40x/walnut_defconfig
@@ -98,8 +98,7 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig
index 1f6d049..2d3dfb5 100644
--- a/arch/powerpc/configs/44x/arches_defconfig
+++ b/arch/powerpc/configs/44x/arches_defconfig
@@ -98,8 +98,7 @@
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig
index 788faac..51a00c4 100644
--- a/arch/powerpc/configs/44x/bamboo_defconfig
+++ b/arch/powerpc/configs/44x/bamboo_defconfig
@@ -102,8 +102,7 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
index 4ef8bca..1028b1b 100644
--- a/arch/powerpc/configs/44x/canyonlands_defconfig
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -98,8 +98,7 @@
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig
index ca17b14..69f5633 100644
--- a/arch/powerpc/configs/44x/ebony_defconfig
+++ b/arch/powerpc/configs/44x/ebony_defconfig
@@ -101,8 +101,7 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/eiger_defconfig b/arch/powerpc/configs/44x/eiger_defconfig
index e3149ba..dcd859c 100644
--- a/arch/powerpc/configs/44x/eiger_defconfig
+++ b/arch/powerpc/configs/44x/eiger_defconfig
@@ -98,8 +98,7 @@
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/icon_defconfig b/arch/powerpc/configs/44x/icon_defconfig
new file mode 100644
index 0000000..277f88c
--- /dev/null
+++ b/arch/powerpc/configs/44x/icon_defconfig
@@ -0,0 +1,1451 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.34-rc7
+# Fri May 21 17:40:22 2010
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_PPC_BOOK3S_32 is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=4
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=2
+CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+# CONFIG_LOGBUFFER is not set
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
+# CONFIG_YOSEMITE is not set
+CONFIG_ICON=y
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+CONFIG_PPC44x_SIMPLE=y
+# CONFIG_PPC4xx_GPIO is not set
+CONFIG_440SPe=y
+CONFIG_STDBINUTILS=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_ARCH_HAS_NMI_WATCHDOG is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_XILINX_SYSACE=y
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_FUSION=y
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=y
+CONFIG_FUSION_LOGGING=y
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_PS2_ALPS is not set
+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_BOOTCOUNT is not set
+# CONFIG_DISPLAY_PDSP1880 is not set
+# CONFIG_MUCMC52_IO is not set
+# CONFIG_UC101_IO is not set
+# CONFIG_SRAM is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SM501=y
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig
index af244e1..a2c24d1 100644
--- a/arch/powerpc/configs/44x/katmai_defconfig
+++ b/arch/powerpc/configs/44x/katmai_defconfig
@@ -97,8 +97,7 @@
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig
index 8fed3b2..3bb55b5 100644
--- a/arch/powerpc/configs/44x/rainier_defconfig
+++ b/arch/powerpc/configs/44x/rainier_defconfig
@@ -101,8 +101,7 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/redwood_defconfig b/arch/powerpc/configs/44x/redwood_defconfig
index a67ec91..684f40d 100644
--- a/arch/powerpc/configs/44x/redwood_defconfig
+++ b/arch/powerpc/configs/44x/redwood_defconfig
@@ -98,8 +98,7 @@
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
index 886cb6a..e202924 100644
--- a/arch/powerpc/configs/44x/sam440ep_defconfig
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -103,8 +103,7 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig
index 1b2f41d..c348a46 100644
--- a/arch/powerpc/configs/44x/sequoia_defconfig
+++ b/arch/powerpc/configs/44x/sequoia_defconfig
@@ -102,8 +102,7 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig
index 12041d3..f4cb7e8 100644
--- a/arch/powerpc/configs/44x/taishan_defconfig
+++ b/arch/powerpc/configs/44x/taishan_defconfig
@@ -101,8 +101,7 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
index 2518b85..c7ead0e 100644
--- a/arch/powerpc/configs/44x/virtex5_defconfig
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -80,8 +80,7 @@
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 218d49b..7664c83 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -95,8 +95,7 @@
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index 90492ff..eac7c17 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -96,8 +96,7 @@
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index dffc8ca..27afb6e 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -95,8 +95,7 @@
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index 3cb2a52..5fe39dd 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -98,8 +98,7 @@
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 96181c6..a108b84 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -95,8 +95,7 @@
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index 183c59c..b728a7d 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -103,8 +103,7 @@
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index 1524d94..8e738de 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -103,8 +103,7 @@
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 767c204..59bf9e2 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -103,8 +103,7 @@
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index 55b9e4e..4e8b01e 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -98,8 +98,7 @@
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 1be38eb..20fde63 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -103,8 +103,7 @@
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index a630094..74f714d 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -102,8 +102,7 @@
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 9f89d5c..a670cee 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -92,8 +92,7 @@
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
diff --git a/arch/powerpc/configs/amigaone_defconfig b/arch/powerpc/configs/amigaone_defconfig
index b63cc38..851287e 100644
--- a/arch/powerpc/configs/amigaone_defconfig
+++ b/arch/powerpc/configs/amigaone_defconfig
@@ -87,8 +87,7 @@
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 4ab6074..b429a65 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -102,8 +102,7 @@
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index c6d2baa..9433719 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -83,8 +83,7 @@
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_PROC_PID_CPUSET=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
diff --git a/arch/powerpc/configs/celleb_defconfig b/arch/powerpc/configs/celleb_defconfig
index d212377..6be6c09 100644
--- a/arch/powerpc/configs/celleb_defconfig
+++ b/arch/powerpc/configs/celleb_defconfig
@@ -78,8 +78,7 @@
# CONFIG_GROUP_SCHED is not set
# CONFIG_USER_SCHED is not set
# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index 5094a65..2fdab66 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -77,8 +77,7 @@
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index 81e904e..6b70839 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -96,8 +96,7 @@
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index c5af46e..1cee889 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -91,8 +91,7 @@
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 826a65d..57d3ffa 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -82,8 +82,7 @@
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/gamecube_defconfig b/arch/powerpc/configs/gamecube_defconfig
index 942e119..1c2dbf0 100644
--- a/arch/powerpc/configs/gamecube_defconfig
+++ b/arch/powerpc/configs/gamecube_defconfig
@@ -101,8 +101,7 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/holly_defconfig b/arch/powerpc/configs/holly_defconfig
index a211a79..a60d61b 100644
--- a/arch/powerpc/configs/holly_defconfig
+++ b/arch/powerpc/configs/holly_defconfig
@@ -73,7 +73,6 @@
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index 76982c5..151c8e1 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -81,8 +81,7 @@
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 588a2ad..8ecacf7 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -97,8 +97,7 @@
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 8b24400..dc50eec 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -78,8 +78,7 @@
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index 0cbd56f..b36ebb7 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -96,8 +96,7 @@
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index c1be261..0dd5015 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -90,8 +90,7 @@
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/mpc512x_defconfig b/arch/powerpc/configs/mpc512x_defconfig
index a047272..aa2654e 100644
--- a/arch/powerpc/configs/mpc512x_defconfig
+++ b/arch/powerpc/configs/mpc512x_defconfig
@@ -97,8 +97,7 @@
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 7012ac0..f875ec2 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -97,8 +97,7 @@
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index 27c63ce..b1e88fe 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -95,8 +95,7 @@
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 20ba0cf..74a7216 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -98,8 +98,7 @@
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index ea8870a..753bb79 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -93,8 +93,7 @@
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig
index 35b6068..afb4d1b 100644
--- a/arch/powerpc/configs/ppc40x_defconfig
+++ b/arch/powerpc/configs/ppc40x_defconfig
@@ -99,8 +99,7 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 46f5c47..bd3d23f 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -103,8 +103,7 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index dad617e..369f4e0 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -93,8 +93,7 @@
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_PROC_PID_CPUSET=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
index 8195f16..403e82e 100644
--- a/arch/powerpc/configs/ppc64e_defconfig
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -107,8 +107,7 @@
CONFIG_PROC_PID_CPUSET=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index 68c175e..12c8ee8 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -96,8 +96,7 @@
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index 93f4505..a18f597 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -98,8 +98,7 @@
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 16a1458..16ae717 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -92,8 +92,7 @@
# CONFIG_GROUP_SCHED is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_PROC_PID_CPUSET=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index b162580..01be0e2 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -95,8 +95,7 @@
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
diff --git a/arch/powerpc/configs/wii_defconfig b/arch/powerpc/configs/wii_defconfig
index c386828..ee054f8 100644
--- a/arch/powerpc/configs/wii_defconfig
+++ b/arch/powerpc/configs/wii_defconfig
@@ -102,8 +102,7 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/include/asm/abs_addr.h b/arch/powerpc/include/asm/abs_addr.h
index 98324c5..9a846ef 100644
--- a/arch/powerpc/include/asm/abs_addr.h
+++ b/arch/powerpc/include/asm/abs_addr.h
@@ -12,7 +12,7 @@
* 2 of the License, or (at your option) any later version.
*/
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/types.h>
#include <asm/page.h>
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 725634f..4b50941 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -42,7 +42,7 @@
#endif /* __powerpc64__ && ! __ASSEMBLY__ */
#if !defined(__ASSEMBLY__)
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
#endif
#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h
index 0835eb9..e50323f 100644
--- a/arch/powerpc/include/asm/cpm.h
+++ b/arch/powerpc/include/asm/cpm.h
@@ -7,6 +7,30 @@
#include <linux/of.h>
/*
+ * SPI Parameter RAM common to QE and CPM.
+ */
+struct spi_pram {
+ __be16 rbase; /* Rx Buffer descriptor base address */
+ __be16 tbase; /* Tx Buffer descriptor base address */
+ u8 rfcr; /* Rx function code */
+ u8 tfcr; /* Tx function code */
+ __be16 mrblr; /* Max receive buffer length */
+ __be32 rstate; /* Internal */
+ __be32 rdp; /* Internal */
+ __be16 rbptr; /* Internal */
+ __be16 rbc; /* Internal */
+ __be32 rxtmp; /* Internal */
+ __be32 tstate; /* Internal */
+ __be32 tdp; /* Internal */
+ __be16 tbptr; /* Internal */
+ __be16 tbc; /* Internal */
+ __be32 txtmp; /* Internal */
+ __be32 res; /* Tx temp. */
+ __be16 rpbase; /* Relocation pointer (CPM1 only) */
+ __be16 res1; /* Reserved */
+};
+
+/*
* USB Controller pram common to QE and CPM.
*/
struct usb_ctlr {
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 81b0119..bd07650d 100644
--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -17,6 +17,7 @@
#ifndef __CPM1__
#define __CPM1__
+#include <linux/init.h>
#include <asm/8xx_immap.h>
#include <asm/ptrace.h>
#include <asm/cpm.h>
@@ -54,7 +55,7 @@
extern void cpm_setbrg(uint brg, uint rate);
-extern void cpm_load_patch(cpm8xx_t *cp);
+extern void __init cpm_load_patch(cpm8xx_t *cp);
extern void cpm_reset(void);
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index e3cba4e..b0b2113 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -70,6 +70,7 @@
extern int machine_check_generic(struct pt_regs *regs);
extern int machine_check_4xx(struct pt_regs *regs);
extern int machine_check_440A(struct pt_regs *regs);
+extern int machine_check_e500mc(struct pt_regs *regs);
extern int machine_check_e500(struct pt_regs *regs);
extern int machine_check_e200(struct pt_regs *regs);
extern int machine_check_47x(struct pt_regs *regs);
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index e054bae..ecba37a 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -358,7 +358,6 @@
#define exc_lvl_ctx_init()
#endif
-#ifdef CONFIG_IRQSTACKS
/*
* Per-cpu stacks for handling hard and soft interrupts.
*/
@@ -369,11 +368,6 @@
extern void call_do_softirq(struct thread_info *tp);
extern int call_handle_irq(int irq, void *p1,
struct thread_info *tp, void *func);
-#else
-#define irq_ctx_init()
-
-#endif /* CONFIG_IRQSTACKS */
-
extern void do_IRQ(struct pt_regs *regs);
#endif /* _ASM_IRQ_H */
diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h
index 5ebfe5d..6857af5 100644
--- a/arch/powerpc/include/asm/kdump.h
+++ b/arch/powerpc/include/asm/kdump.h
@@ -3,8 +3,17 @@
#include <asm/page.h>
-/* Kdump kernel runs at 32 MB, change at your peril. */
+/*
+ * If CONFIG_RELOCATABLE is enabled we can place the kdump kernel anywhere.
+ * To keep enough space in the RMO for the first stage kernel on 64bit, we
+ * place it at 64MB. If CONFIG_RELOCATABLE is not enabled we must place
+ * the second stage at 32MB.
+ */
+#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_PPC64)
+#define KDUMP_KERNELBASE 0x4000000
+#else
#define KDUMP_KERNELBASE 0x2000000
+#endif
/* How many bytes to reserve at zero for kdump. The reserve limit should
* be greater or equal to the trampoline's end address.
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index a6ca6da..2a9cd74 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -2,6 +2,18 @@
#define _ASM_POWERPC_KEXEC_H
#ifdef __KERNEL__
+#ifdef CONFIG_FSL_BOOKE
+
+/*
+ * On FSL-BookE we setup a 1:1 mapping which covers the first 2GiB of memory
+ * and therefore we can only deal with memory within this range
+ */
+#define KEXEC_SOURCE_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL)
+#define KEXEC_DESTINATION_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL)
+#define KEXEC_CONTROL_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL)
+
+#else
+
/*
* Maximum page that is mapped directly into kernel memory.
* XXX: Since we copy virt we can use any page we allocate
@@ -21,6 +33,7 @@
/* TASK_SIZE, probably left over from use_mm ?? */
#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
#endif
+#endif
#define KEXEC_CONTROL_PAGE_SIZE 4096
diff --git a/arch/powerpc/include/asm/lmb.h b/arch/powerpc/include/asm/lmb.h
deleted file mode 100644
index 6f5fdf0..0000000
--- a/arch/powerpc/include/asm/lmb.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _ASM_POWERPC_LMB_H
-#define _ASM_POWERPC_LMB_H
-
-#include <asm/udbg.h>
-
-#define LMB_DBG(fmt...) udbg_printf(fmt)
-
-#ifdef CONFIG_PPC32
-extern phys_addr_t lowmem_end_addr;
-#define LMB_REAL_LIMIT lowmem_end_addr
-#else
-#define LMB_REAL_LIMIT 0
-#endif
-
-#endif /* _ASM_POWERPC_LMB_H */
diff --git a/arch/powerpc/include/asm/macio.h b/arch/powerpc/include/asm/macio.h
index 19a661b..675e159 100644
--- a/arch/powerpc/include/asm/macio.h
+++ b/arch/powerpc/include/asm/macio.h
@@ -123,10 +123,6 @@
*/
struct macio_driver
{
- char *name;
- struct of_device_id *match_table;
- struct module *owner;
-
int (*probe)(struct macio_dev* dev, const struct of_device_id *match);
int (*remove)(struct macio_dev* dev);
diff --git a/arch/powerpc/include/asm/memblock.h b/arch/powerpc/include/asm/memblock.h
new file mode 100644
index 0000000..3c29728
--- /dev/null
+++ b/arch/powerpc/include/asm/memblock.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_POWERPC_MEMBLOCK_H
+#define _ASM_POWERPC_MEMBLOCK_H
+
+#include <asm/udbg.h>
+
+#define MEMBLOCK_DBG(fmt...) udbg_printf(fmt)
+
+#ifdef CONFIG_PPC32
+extern phys_addr_t lowmem_end_addr;
+#define MEMBLOCK_REAL_LIMIT lowmem_end_addr
+#else
+#define MEMBLOCK_REAL_LIMIT 0
+#endif
+
+#endif /* _ASM_POWERPC_MEMBLOCK_H */
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
index bfc4e02..358ff14 100644
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -162,14 +162,6 @@
#endif /* !CONFIG_HUGETLB_PAGE */
-#ifdef MODULE
-#define __page_aligned __attribute__((__aligned__(PAGE_SIZE)))
-#else
-#define __page_aligned \
- __attribute__((__aligned__(PAGE_SIZE), \
- __section__(".data.page_aligned")))
-#endif
-
#define VM_DATA_DEFAULT_FLAGS \
(test_thread_flag(TIF_32BIT) ? \
VM_DATA_DEFAULT_FLAGS32 : VM_DATA_DEFAULT_FLAGS64)
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index 5d8be04..0175a67 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -24,11 +24,7 @@
* 2 of the License, or (at your option) any later version.
*/
-#ifdef __KERNEL__
#include <linux/types.h>
-#else
-#include <stdint.h>
-#endif
#ifndef __ASSEMBLY__
@@ -364,13 +360,13 @@
#ifndef __ASSEMBLY__
struct ppc_debug_info {
- uint32_t version; /* Only version 1 exists to date */
- uint32_t num_instruction_bps;
- uint32_t num_data_bps;
- uint32_t num_condition_regs;
- uint32_t data_bp_alignment;
- uint32_t sizeof_condition; /* size of the DVC register */
- uint64_t features;
+ __u32 version; /* Only version 1 exists to date */
+ __u32 num_instruction_bps;
+ __u32 num_data_bps;
+ __u32 num_condition_regs;
+ __u32 data_bp_alignment;
+ __u32 sizeof_condition; /* size of the DVC register */
+ __u64 features;
};
#endif /* __ASSEMBLY__ */
@@ -386,13 +382,13 @@
#ifndef __ASSEMBLY__
struct ppc_hw_breakpoint {
- uint32_t version; /* currently, version must be 1 */
- uint32_t trigger_type; /* only some combinations allowed */
- uint32_t addr_mode; /* address match mode */
- uint32_t condition_mode; /* break/watchpoint condition flags */
- uint64_t addr; /* break/watchpoint address */
- uint64_t addr2; /* range end or mask */
- uint64_t condition_value; /* contents of the DVC register */
+ __u32 version; /* currently, version must be 1 */
+ __u32 trigger_type; /* only some combinations allowed */
+ __u32 addr_mode; /* address match mode */
+ __u32 condition_mode; /* break/watchpoint condition flags */
+ __u64 addr; /* break/watchpoint address */
+ __u64 addr2; /* range end or mask */
+ __u64 condition_value; /* contents of the DVC register */
};
#endif /* __ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 5304a37..2360317 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -4,6 +4,12 @@
* are not true Book E PowerPCs, they borrowed a number of features
* before Book E was finalized, and are included here as well. Unfortunatly,
* they sometimes used different locations than true Book E CPUs did.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
*/
#ifdef __KERNEL__
#ifndef __ASM_POWERPC_REG_BOOKE_H__
@@ -88,6 +94,7 @@
#define SPRN_IVOR35 0x213 /* Interrupt Vector Offset Register 35 */
#define SPRN_IVOR36 0x214 /* Interrupt Vector Offset Register 36 */
#define SPRN_IVOR37 0x215 /* Interrupt Vector Offset Register 37 */
+#define SPRN_MCARU 0x239 /* Machine Check Address Register Upper */
#define SPRN_MCSRR0 0x23A /* Machine Check Save and Restore Register 0 */
#define SPRN_MCSRR1 0x23B /* Machine Check Save and Restore Register 1 */
#define SPRN_MCSR 0x23C /* Machine Check Status Register */
@@ -196,8 +203,11 @@
#define PPC47x_MCSR_IPR 0x00400000 /* Imprecise Machine Check Exception */
#ifdef CONFIG_E500
+/* All e500 */
#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */
#define MCSR_ICPERR 0x40000000UL /* I-Cache Parity Error */
+
+/* e500v1/v2 */
#define MCSR_DCP_PERR 0x20000000UL /* D-Cache Push Parity Error */
#define MCSR_DCPERR 0x10000000UL /* D-Cache Parity Error */
#define MCSR_BUS_IAERR 0x00000080UL /* Instruction Address Error */
@@ -209,12 +219,20 @@
#define MCSR_BUS_IPERR 0x00000002UL /* Instruction parity Error */
#define MCSR_BUS_RPERR 0x00000001UL /* Read parity Error */
-/* e500 parts may set unused bits in MCSR; mask these off */
-#define MCSR_MASK (MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \
- MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \
- MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \
- MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR)
+/* e500mc */
+#define MCSR_DCPERR_MC 0x20000000UL /* D-Cache Parity Error */
+#define MCSR_L2MMU_MHIT 0x04000000UL /* Hit on multiple TLB entries */
+#define MCSR_NMI 0x00100000UL /* Non-Maskable Interrupt */
+#define MCSR_MAV 0x00080000UL /* MCAR address valid */
+#define MCSR_MEA 0x00040000UL /* MCAR is effective address */
+#define MCSR_IF 0x00010000UL /* Instruction Fetch */
+#define MCSR_LD 0x00008000UL /* Load */
+#define MCSR_ST 0x00004000UL /* Store */
+#define MCSR_LDG 0x00002000UL /* Guarded Load */
+#define MCSR_TLBSYNC 0x00000002UL /* Multiple tlbsyncs detected */
+#define MCSR_BSL2_ERR 0x00000001UL /* Backside L2 cache error */
#endif
+
#ifdef CONFIG_E200
#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */
#define MCSR_CP_PERR 0x20000000UL /* Cache Push Parity Error */
@@ -225,11 +243,6 @@
#define MCSR_BUS_DRERR 0x00000008UL /* Read Bus Error on data load */
#define MCSR_BUS_WRERR 0x00000004UL /* Write Bus Error on buffered
store or cache line push */
-
-/* e200 parts may set unused bits in MCSR; mask these off */
-#define MCSR_MASK (MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \
- MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \
- MCSR_BUS_WRERR)
#endif
/* Bit definitions for the DBSR. */
diff --git a/arch/powerpc/include/asm/scatterlist.h b/arch/powerpc/include/asm/scatterlist.h
index 912bf59..34cc78f 100644
--- a/arch/powerpc/include/asm/scatterlist.h
+++ b/arch/powerpc/include/asm/scatterlist.h
@@ -9,38 +9,12 @@
* 2 of the License, or (at your option) any later version.
*/
-#ifdef __KERNEL__
-#include <linux/types.h>
#include <asm/dma.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset;
- unsigned int length;
-
- /* For TCE or SWIOTLB support */
- dma_addr_t dma_address;
- u32 dma_length;
-};
-
-/*
- * These macros should be used after a dma_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->dma_length)
+#include <asm-generic/scatterlist.h>
#ifdef __powerpc64__
#define ISA_DMA_THRESHOLD (~0UL)
#endif
-
#define ARCH_HAS_SG_CHAIN
-#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_SCATTERLIST_H */
diff --git a/arch/powerpc/include/asm/sfp-machine.h b/arch/powerpc/include/asm/sfp-machine.h
index 8b8fab9..3a7a67a 100644
--- a/arch/powerpc/include/asm/sfp-machine.h
+++ b/arch/powerpc/include/asm/sfp-machine.h
@@ -353,6 +353,12 @@
#define abort() \
return 0
+#ifdef __BIG_ENDIAN
+#define __BYTE_ORDER __BIG_ENDIAN
+#else
+#define __BYTE_ORDER __LITTLE_ENDIAN
+#endif
+
/* Exception flags. */
#define EFLAG_INVALID (1 << (31 - 2))
#define EFLAG_OVERFLOW (1 << (31 - 3))
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 8773263..58d0572 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -57,8 +57,12 @@
obj-$(CONFIG_E500) += idle_e500.o
obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
obj-$(CONFIG_TAU) += tau_6xx.o
-obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o \
- swsusp_$(CONFIG_WORD_SIZE).o
+obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o
+ifeq ($(CONFIG_FSL_BOOKE),y)
+obj-$(CONFIG_HIBERNATION) += swsusp_booke.o
+else
+obj-$(CONFIG_HIBERNATION) += swsusp_$(CONFIG_WORD_SIZE).o
+endif
obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o
obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_44x) += cpu_setup_44x.o
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index 26e5863..625942a 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -7,7 +7,7 @@
#include <linux/string.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/sections.h>
#include <asm/prom.h>
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 9556be9..87aa0f3 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1840,7 +1840,7 @@
.oprofile_cpu_type = "ppc/e500mc",
.oprofile_type = PPC_OPROFILE_FSL_EMB,
.cpu_setup = __setup_cpu_e500mc,
- .machine_check = machine_check_e500,
+ .machine_check = machine_check_e500mc,
.platform = "ppce500mc",
},
{ /* default match */
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 8c066d6..417f7b0 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -24,7 +24,7 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/types.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/processor.h>
#include <asm/machdep.h>
@@ -163,6 +163,7 @@
}
/* wait for all the CPUs to hit real mode but timeout if they don't come in */
+#ifdef CONFIG_PPC_STD_MMU_64
static void crash_kexec_wait_realmode(int cpu)
{
unsigned int msecs;
@@ -187,6 +188,7 @@
}
mb();
}
+#endif
/*
* This function will be called by secondary cpus or by kexec cpu
@@ -445,7 +447,9 @@
crash_kexec_prepare_cpus(crashing_cpu);
cpu_set(crashing_cpu, cpus_in_crash);
crash_kexec_stop_spus();
+#if defined(CONFIG_PPC_STD_MMU_64) && defined(CONFIG_SMP)
crash_kexec_wait_realmode(crashing_cpu);
+#endif
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(1, 0);
}
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 5fb667a..40f5246 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -13,7 +13,7 @@
#include <linux/crash_dump.h>
#include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/code-patching.h>
#include <asm/kdump.h>
#include <asm/prom.h>
@@ -33,7 +33,7 @@
#ifndef CONFIG_RELOCATABLE
void __init reserve_kdump_trampoline(void)
{
- lmb_reserve(0, KDUMP_RESERVE_LIMIT);
+ memblock_reserve(0, KDUMP_RESERVE_LIMIT);
}
static void __init create_trampoline(unsigned long addr)
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index 4ff4da2..02f724f 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -39,8 +39,8 @@
.dma_supported = swiotlb_dma_supported,
.map_page = swiotlb_map_page,
.unmap_page = swiotlb_unmap_page,
- .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
- .sync_single_range_for_device = swiotlb_sync_single_range_for_device,
+ .sync_single_for_cpu = swiotlb_sync_single_for_cpu,
+ .sync_single_for_device = swiotlb_sync_single_for_device,
.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
.sync_sg_for_device = swiotlb_sync_sg_for_device,
.mapping_error = swiotlb_dma_mapping_error,
@@ -71,7 +71,7 @@
sd->max_direct_dma_addr = 0;
/* May need to bounce if the device can't address all of DRAM */
- if ((dma_get_mask(dev) + 1) < lmb_end_of_DRAM())
+ if ((dma_get_mask(dev) + 1) < memblock_end_of_DRAM())
set_dma_ops(dev, &swiotlb_dma_ops);
return NOTIFY_DONE;
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 6c1df57..84d6367 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -9,7 +9,7 @@
#include <linux/dma-mapping.h>
#include <linux/dma-debug.h>
#include <linux/gfp.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/bug.h>
#include <asm/abs_addr.h>
@@ -89,7 +89,7 @@
/* Could be improved so platforms can set the limit in case
* they have limited DMA windows
*/
- return mask >= (lmb_end_of_DRAM() - 1);
+ return mask >= (memblock_end_of_DRAM() - 1);
#else
return 1;
#endif
@@ -127,11 +127,11 @@
__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
}
-static inline void dma_direct_sync_single_range(struct device *dev,
- dma_addr_t dma_handle, unsigned long offset, size_t size,
- enum dma_data_direction direction)
+static inline void dma_direct_sync_single(struct device *dev,
+ dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction direction)
{
- __dma_sync(bus_to_virt(dma_handle+offset), size, direction);
+ __dma_sync(bus_to_virt(dma_handle), size, direction);
}
#endif
@@ -144,8 +144,8 @@
.map_page = dma_direct_map_page,
.unmap_page = dma_direct_unmap_page,
#ifdef CONFIG_NOT_COHERENT_CACHE
- .sync_single_range_for_cpu = dma_direct_sync_single_range,
- .sync_single_range_for_device = dma_direct_sync_single_range,
+ .sync_single_for_cpu = dma_direct_sync_single,
+ .sync_single_for_device = dma_direct_sync_single,
.sync_sg_for_cpu = dma_direct_sync_sg,
.sync_sg_for_device = dma_direct_sync_sg,
#endif
diff --git a/arch/powerpc/kernel/fsl_booke_entry_mapping.S b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
new file mode 100644
index 0000000..a92c79b
--- /dev/null
+++ b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
@@ -0,0 +1,235 @@
+
+/* 1. Find the index of the entry we're executing in */
+ bl invstr /* Find our address */
+invstr: mflr r6 /* Make it accessible */
+ mfmsr r7
+ rlwinm r4,r7,27,31,31 /* extract MSR[IS] */
+ mfspr r7, SPRN_PID0
+ slwi r7,r7,16
+ or r7,r7,r4
+ mtspr SPRN_MAS6,r7
+ tlbsx 0,r6 /* search MSR[IS], SPID=PID0 */
+ mfspr r7,SPRN_MAS1
+ andis. r7,r7,MAS1_VALID@h
+ bne match_TLB
+
+ mfspr r7,SPRN_MMUCFG
+ rlwinm r7,r7,21,28,31 /* extract MMUCFG[NPIDS] */
+ cmpwi r7,3
+ bne match_TLB /* skip if NPIDS != 3 */
+
+ mfspr r7,SPRN_PID1
+ slwi r7,r7,16
+ or r7,r7,r4
+ mtspr SPRN_MAS6,r7
+ tlbsx 0,r6 /* search MSR[IS], SPID=PID1 */
+ mfspr r7,SPRN_MAS1
+ andis. r7,r7,MAS1_VALID@h
+ bne match_TLB
+ mfspr r7, SPRN_PID2
+ slwi r7,r7,16
+ or r7,r7,r4
+ mtspr SPRN_MAS6,r7
+ tlbsx 0,r6 /* Fall through, we had to match */
+
+match_TLB:
+ mfspr r7,SPRN_MAS0
+ rlwinm r3,r7,16,20,31 /* Extract MAS0(Entry) */
+
+ mfspr r7,SPRN_MAS1 /* Insure IPROT set */
+ oris r7,r7,MAS1_IPROT@h
+ mtspr SPRN_MAS1,r7
+ tlbwe
+
+/* 2. Invalidate all entries except the entry we're executing in */
+ mfspr r9,SPRN_TLB1CFG
+ andi. r9,r9,0xfff
+ li r6,0 /* Set Entry counter to 0 */
+1: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
+ rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */
+ mtspr SPRN_MAS0,r7
+ tlbre
+ mfspr r7,SPRN_MAS1
+ rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */
+ cmpw r3,r6
+ beq skpinv /* Dont update the current execution TLB */
+ mtspr SPRN_MAS1,r7
+ tlbwe
+ isync
+skpinv: addi r6,r6,1 /* Increment */
+ cmpw r6,r9 /* Are we done? */
+ bne 1b /* If not, repeat */
+
+ /* Invalidate TLB0 */
+ li r6,0x04
+ tlbivax 0,r6
+ TLBSYNC
+ /* Invalidate TLB1 */
+ li r6,0x0c
+ tlbivax 0,r6
+ TLBSYNC
+
+/* 3. Setup a temp mapping and jump to it */
+ andi. r5, r3, 0x1 /* Find an entry not used and is non-zero */
+ addi r5, r5, 0x1
+ lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
+ rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
+ mtspr SPRN_MAS0,r7
+ tlbre
+
+ /* grab and fixup the RPN */
+ mfspr r6,SPRN_MAS1 /* extract MAS1[SIZE] */
+ rlwinm r6,r6,25,27,31
+ li r8,-1
+ addi r6,r6,10
+ slw r6,r8,r6 /* convert to mask */
+
+ bl 1f /* Find our address */
+1: mflr r7
+
+ mfspr r8,SPRN_MAS3
+#ifdef CONFIG_PHYS_64BIT
+ mfspr r23,SPRN_MAS7
+#endif
+ and r8,r6,r8
+ subfic r9,r6,-4096
+ and r9,r9,r7
+
+ or r25,r8,r9
+ ori r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR)
+
+ /* Just modify the entry ID and EPN for the temp mapping */
+ lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
+ rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
+ mtspr SPRN_MAS0,r7
+ xori r6,r4,1 /* Setup TMP mapping in the other Address space */
+ slwi r6,r6,12
+ oris r6,r6,(MAS1_VALID|MAS1_IPROT)@h
+ ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_4K))@l
+ mtspr SPRN_MAS1,r6
+ mfspr r6,SPRN_MAS2
+ li r7,0 /* temp EPN = 0 */
+ rlwimi r7,r6,0,20,31
+ mtspr SPRN_MAS2,r7
+ mtspr SPRN_MAS3,r8
+ tlbwe
+
+ xori r6,r4,1
+ slwi r6,r6,5 /* setup new context with other address space */
+ bl 1f /* Find our address */
+1: mflr r9
+ rlwimi r7,r9,0,20,31
+ addi r7,r7,(2f - 1b)
+ mtspr SPRN_SRR0,r7
+ mtspr SPRN_SRR1,r6
+ rfi
+2:
+/* 4. Clear out PIDs & Search info */
+ li r6,0
+ mtspr SPRN_MAS6,r6
+ mtspr SPRN_PID0,r6
+
+ mfspr r7,SPRN_MMUCFG
+ rlwinm r7,r7,21,28,31 /* extract MMUCFG[NPIDS] */
+ cmpwi r7,3
+ bne 2f /* skip if NPIDS != 3 */
+
+ mtspr SPRN_PID1,r6
+ mtspr SPRN_PID2,r6
+
+/* 5. Invalidate mapping we started in */
+2:
+ lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
+ rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
+ mtspr SPRN_MAS0,r7
+ tlbre
+ mfspr r6,SPRN_MAS1
+ rlwinm r6,r6,0,2,0 /* clear IPROT */
+ mtspr SPRN_MAS1,r6
+ tlbwe
+ /* Invalidate TLB1 */
+ li r9,0x0c
+ tlbivax 0,r9
+ TLBSYNC
+
+/* The mapping only needs to be cache-coherent on SMP */
+#ifdef CONFIG_SMP
+#define M_IF_SMP MAS2_M
+#else
+#define M_IF_SMP 0
+#endif
+
+#if defined(ENTRY_MAPPING_BOOT_SETUP)
+
+/* 6. Setup KERNELBASE mapping in TLB1[0] */
+ lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
+ mtspr SPRN_MAS0,r6
+ lis r6,(MAS1_VALID|MAS1_IPROT)@h
+ ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l
+ mtspr SPRN_MAS1,r6
+ lis r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@h
+ ori r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@l
+ mtspr SPRN_MAS2,r6
+ mtspr SPRN_MAS3,r8
+ tlbwe
+
+/* 7. Jump to KERNELBASE mapping */
+ lis r6,(KERNELBASE & ~0xfff)@h
+ ori r6,r6,(KERNELBASE & ~0xfff)@l
+
+#elif defined(ENTRY_MAPPING_KEXEC_SETUP)
+/*
+ * 6. Setup a 1:1 mapping in TLB1. Esel 0 is unsued, 1 or 2 contains the tmp
+ * mapping so we start at 3. We setup 8 mappings, each 256MiB in size. This
+ * will cover the first 2GiB of memory.
+ */
+
+ lis r10, (MAS1_VALID|MAS1_IPROT)@h
+ ori r10,r10, (MAS1_TSIZE(BOOK3E_PAGESZ_256M))@l
+ li r11, 0
+ li r0, 8
+ mtctr r0
+
+next_tlb_setup:
+ addi r0, r11, 3
+ rlwinm r0, r0, 16, 4, 15 // Compute esel
+ rlwinm r9, r11, 28, 0, 3 // Compute [ER]PN
+ oris r0, r0, (MAS0_TLBSEL(1))@h
+ mtspr SPRN_MAS0,r0
+ mtspr SPRN_MAS1,r10
+ mtspr SPRN_MAS2,r9
+ ori r9, r9, (MAS3_SX|MAS3_SW|MAS3_SR)
+ mtspr SPRN_MAS3,r9
+ tlbwe
+ addi r11, r11, 1
+ bdnz+ next_tlb_setup
+
+/* 7. Jump to our 1:1 mapping */
+ mr r6, r25
+#else
+ #error You need to specify the mapping or not use this at all.
+#endif
+
+ lis r7,MSR_KERNEL@h
+ ori r7,r7,MSR_KERNEL@l
+ bl 1f /* Find our address */
+1: mflr r9
+ rlwimi r6,r9,0,20,31
+ addi r6,r6,(2f - 1b)
+ mtspr SPRN_SRR0,r6
+ mtspr SPRN_SRR1,r7
+ rfi /* start execution out of TLB1[0] entry */
+
+/* 8. Clear out the temp mapping */
+2: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
+ rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
+ mtspr SPRN_MAS0,r7
+ tlbre
+ mfspr r8,SPRN_MAS1
+ rlwinm r8,r8,0,2,0 /* clear IPROT */
+ mtspr SPRN_MAS1,r8
+ tlbwe
+ /* Invalidate TLB1 */
+ li r9,0x0c
+ tlbivax 0,r9
+ TLBSYNC
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index edd4a57..4faeba2 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -94,204 +94,10 @@
*/
_ENTRY(__early_start)
-/* 1. Find the index of the entry we're executing in */
- bl invstr /* Find our address */
-invstr: mflr r6 /* Make it accessible */
- mfmsr r7
- rlwinm r4,r7,27,31,31 /* extract MSR[IS] */
- mfspr r7, SPRN_PID0
- slwi r7,r7,16
- or r7,r7,r4
- mtspr SPRN_MAS6,r7
- tlbsx 0,r6 /* search MSR[IS], SPID=PID0 */
- mfspr r7,SPRN_MAS1
- andis. r7,r7,MAS1_VALID@h
- bne match_TLB
- mfspr r7,SPRN_MMUCFG
- rlwinm r7,r7,21,28,31 /* extract MMUCFG[NPIDS] */
- cmpwi r7,3
- bne match_TLB /* skip if NPIDS != 3 */
-
- mfspr r7,SPRN_PID1
- slwi r7,r7,16
- or r7,r7,r4
- mtspr SPRN_MAS6,r7
- tlbsx 0,r6 /* search MSR[IS], SPID=PID1 */
- mfspr r7,SPRN_MAS1
- andis. r7,r7,MAS1_VALID@h
- bne match_TLB
- mfspr r7, SPRN_PID2
- slwi r7,r7,16
- or r7,r7,r4
- mtspr SPRN_MAS6,r7
- tlbsx 0,r6 /* Fall through, we had to match */
-
-match_TLB:
- mfspr r7,SPRN_MAS0
- rlwinm r3,r7,16,20,31 /* Extract MAS0(Entry) */
-
- mfspr r7,SPRN_MAS1 /* Insure IPROT set */
- oris r7,r7,MAS1_IPROT@h
- mtspr SPRN_MAS1,r7
- tlbwe
-
-/* 2. Invalidate all entries except the entry we're executing in */
- mfspr r9,SPRN_TLB1CFG
- andi. r9,r9,0xfff
- li r6,0 /* Set Entry counter to 0 */
-1: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
- rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */
- mtspr SPRN_MAS0,r7
- tlbre
- mfspr r7,SPRN_MAS1
- rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */
- cmpw r3,r6
- beq skpinv /* Dont update the current execution TLB */
- mtspr SPRN_MAS1,r7
- tlbwe
- isync
-skpinv: addi r6,r6,1 /* Increment */
- cmpw r6,r9 /* Are we done? */
- bne 1b /* If not, repeat */
-
- /* Invalidate TLB0 */
- li r6,0x04
- tlbivax 0,r6
- TLBSYNC
- /* Invalidate TLB1 */
- li r6,0x0c
- tlbivax 0,r6
- TLBSYNC
-
-/* 3. Setup a temp mapping and jump to it */
- andi. r5, r3, 0x1 /* Find an entry not used and is non-zero */
- addi r5, r5, 0x1
- lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
- rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
- mtspr SPRN_MAS0,r7
- tlbre
-
- /* grab and fixup the RPN */
- mfspr r6,SPRN_MAS1 /* extract MAS1[SIZE] */
- rlwinm r6,r6,25,27,31
- li r8,-1
- addi r6,r6,10
- slw r6,r8,r6 /* convert to mask */
-
- bl 1f /* Find our address */
-1: mflr r7
-
- mfspr r8,SPRN_MAS3
-#ifdef CONFIG_PHYS_64BIT
- mfspr r23,SPRN_MAS7
-#endif
- and r8,r6,r8
- subfic r9,r6,-4096
- and r9,r9,r7
-
- or r25,r8,r9
- ori r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR)
-
- /* Just modify the entry ID and EPN for the temp mapping */
- lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
- rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
- mtspr SPRN_MAS0,r7
- xori r6,r4,1 /* Setup TMP mapping in the other Address space */
- slwi r6,r6,12
- oris r6,r6,(MAS1_VALID|MAS1_IPROT)@h
- ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_4K))@l
- mtspr SPRN_MAS1,r6
- mfspr r6,SPRN_MAS2
- li r7,0 /* temp EPN = 0 */
- rlwimi r7,r6,0,20,31
- mtspr SPRN_MAS2,r7
- mtspr SPRN_MAS3,r8
- tlbwe
-
- xori r6,r4,1
- slwi r6,r6,5 /* setup new context with other address space */
- bl 1f /* Find our address */
-1: mflr r9
- rlwimi r7,r9,0,20,31
- addi r7,r7,(2f - 1b)
- mtspr SPRN_SRR0,r7
- mtspr SPRN_SRR1,r6
- rfi
-2:
-/* 4. Clear out PIDs & Search info */
- li r6,0
- mtspr SPRN_MAS6,r6
- mtspr SPRN_PID0,r6
-
- mfspr r7,SPRN_MMUCFG
- rlwinm r7,r7,21,28,31 /* extract MMUCFG[NPIDS] */
- cmpwi r7,3
- bne 2f /* skip if NPIDS != 3 */
-
- mtspr SPRN_PID1,r6
- mtspr SPRN_PID2,r6
-
-/* 5. Invalidate mapping we started in */
-2:
- lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
- rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
- mtspr SPRN_MAS0,r7
- tlbre
- mfspr r6,SPRN_MAS1
- rlwinm r6,r6,0,2,0 /* clear IPROT */
- mtspr SPRN_MAS1,r6
- tlbwe
- /* Invalidate TLB1 */
- li r9,0x0c
- tlbivax 0,r9
- TLBSYNC
-
-/* The mapping only needs to be cache-coherent on SMP */
-#ifdef CONFIG_SMP
-#define M_IF_SMP MAS2_M
-#else
-#define M_IF_SMP 0
-#endif
-
-/* 6. Setup KERNELBASE mapping in TLB1[0] */
- lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
- mtspr SPRN_MAS0,r6
- lis r6,(MAS1_VALID|MAS1_IPROT)@h
- ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l
- mtspr SPRN_MAS1,r6
- lis r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@h
- ori r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@l
- mtspr SPRN_MAS2,r6
- mtspr SPRN_MAS3,r8
- tlbwe
-
-/* 7. Jump to KERNELBASE mapping */
- lis r6,(KERNELBASE & ~0xfff)@h
- ori r6,r6,(KERNELBASE & ~0xfff)@l
- lis r7,MSR_KERNEL@h
- ori r7,r7,MSR_KERNEL@l
- bl 1f /* Find our address */
-1: mflr r9
- rlwimi r6,r9,0,20,31
- addi r6,r6,(2f - 1b)
- mtspr SPRN_SRR0,r6
- mtspr SPRN_SRR1,r7
- rfi /* start execution out of TLB1[0] entry */
-
-/* 8. Clear out the temp mapping */
-2: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
- rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
- mtspr SPRN_MAS0,r7
- tlbre
- mfspr r8,SPRN_MAS1
- rlwinm r8,r8,0,2,0 /* clear IPROT */
- mtspr SPRN_MAS1,r8
- tlbwe
- /* Invalidate TLB1 */
- li r9,0x0c
- tlbivax 0,r9
- TLBSYNC
+#define ENTRY_MAPPING_BOOT_SETUP
+#include "fsl_booke_entry_mapping.S"
+#undef ENTRY_MAPPING_BOOT_SETUP
/* Establish the interrupt vector offsets */
SET_IVOR(0, CriticalInput);
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 30817d9..77be3d0 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -295,7 +295,10 @@
for_each_irq(irq) {
desc = irq_to_desc(irq);
- if (desc && desc->status & IRQ_PER_CPU)
+ if (!desc)
+ continue;
+
+ if (desc->status & IRQ_PER_CPU)
continue;
cpumask_and(mask, desc->affinity, map);
@@ -317,7 +320,6 @@
}
#endif
-#ifdef CONFIG_IRQSTACKS
static inline void handle_one_irq(unsigned int irq)
{
struct thread_info *curtp, *irqtp;
@@ -358,12 +360,6 @@
if (irqtp->flags)
set_bits(irqtp->flags, &curtp->flags);
}
-#else
-static inline void handle_one_irq(unsigned int irq)
-{
- generic_handle_irq(irq);
-}
-#endif
static inline void check_stack_overflow(void)
{
@@ -455,7 +451,6 @@
}
#endif
-#ifdef CONFIG_IRQSTACKS
struct thread_info *softirq_ctx[NR_CPUS] __read_mostly;
struct thread_info *hardirq_ctx[NR_CPUS] __read_mostly;
@@ -492,10 +487,6 @@
irqtp->task = NULL;
}
-#else
-#define do_softirq_onstack() __do_softirq()
-#endif /* CONFIG_IRQSTACKS */
-
void do_softirq(void)
{
unsigned long flags;
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index c533525..bc47352 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -378,17 +378,6 @@
* single-stepped a copy of the instruction. The address of this
* copy is p->ainsn.insn.
*/
-static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
-{
- int ret;
- unsigned int insn = *p->ainsn.insn;
-
- regs->nip = (unsigned long)p->addr;
- ret = emulate_step(regs, insn);
- if (ret == 0)
- regs->nip = (unsigned long)p->addr + 4;
-}
-
static int __kprobes post_kprobe_handler(struct pt_regs *regs)
{
struct kprobe *cur = kprobe_running();
@@ -406,7 +395,8 @@
cur->post_handler(cur, regs, 0);
}
- resume_execution(cur, regs);
+ /* Adjust nip to after the single-stepped instruction */
+ regs->nip = (unsigned long)cur->addr + 4;
regs->msr |= kcb->kprobe_saved_msr;
/*Restore back the original saved kprobes variables and continue. */
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index bb3d893..89f0051 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -12,7 +12,7 @@
#include <linux/kexec.h>
#include <linux/reboot.h>
#include <linux/threads.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <linux/of.h>
#include <asm/machdep.h>
#include <asm/prom.h>
@@ -66,11 +66,11 @@
unsigned long long crash_size, crash_base;
int ret;
- /* this is necessary because of lmb_phys_mem_size() */
- lmb_analyze();
+ /* this is necessary because of memblock_phys_mem_size() */
+ memblock_analyze();
/* use common parsing */
- ret = parse_crashkernel(boot_command_line, lmb_phys_mem_size(),
+ ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
&crash_size, &crash_base);
if (ret == 0 && crash_size > 0) {
crashk_res.start = crash_base;
@@ -133,9 +133,9 @@
"for crashkernel (System RAM: %ldMB)\n",
(unsigned long)(crash_size >> 20),
(unsigned long)(crashk_res.start >> 20),
- (unsigned long)(lmb_phys_mem_size() >> 20));
+ (unsigned long)(memblock_phys_mem_size() >> 20));
- lmb_reserve(crashk_res.start, crash_size);
+ memblock_reserve(crashk_res.start, crash_size);
}
int overlaps_crashkernel(unsigned long start, unsigned long size)
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 26f9900..ed31a29 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -182,28 +182,12 @@
my_cpu = get_cpu();
/* Make sure each CPU has atleast made it to the state we need */
- for (i=0; i < NR_CPUS; i++) {
+ for_each_online_cpu(i) {
if (i == my_cpu)
continue;
while (paca[i].kexec_state < wait_state) {
barrier();
- if (!cpu_possible(i)) {
- printk("kexec: cpu %d hw_cpu_id %d is not"
- " possible, ignoring\n",
- i, paca[i].hw_cpu_id);
- break;
- }
- if (!cpu_online(i)) {
- /* Fixme: this can be spinning in
- * pSeries_secondary_wait with a paca
- * waiting for it to go online.
- */
- printk("kexec: cpu %d hw_cpu_id %d is not"
- " online, ignoring\n",
- i, paca[i].hw_cpu_id);
- break;
- }
if (i != notified) {
printk( "kexec: waiting for cpu %d (physical"
" %d) to enter %i state\n",
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 8043d1b..6bbd7a6 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -33,7 +33,6 @@
.text
-#ifdef CONFIG_IRQSTACKS
_GLOBAL(call_do_softirq)
mflr r0
stw r0,4(r1)
@@ -56,7 +55,6 @@
lwz r0,4(r1)
mtlr r0
blr
-#endif /* CONFIG_IRQSTACKS */
/*
* This returns the high 64 bits of the product of two 64-bit numbers.
@@ -711,6 +709,22 @@
/* r4 = reboot_code_buffer */
/* r5 = start_address */
+#ifdef CONFIG_FSL_BOOKE
+
+ mr r29, r3
+ mr r30, r4
+ mr r31, r5
+
+#define ENTRY_MAPPING_KEXEC_SETUP
+#include "fsl_booke_entry_mapping.S"
+#undef ENTRY_MAPPING_KEXEC_SETUP
+
+ mr r3, r29
+ mr r4, r30
+ mr r5, r31
+
+ li r0, 0
+#else
li r0, 0
/*
@@ -727,6 +741,7 @@
rfi
1:
+#endif
/* from this point address translation is turned off */
/* and interrupts are disabled */
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index a2b18df..e514490 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -28,7 +28,6 @@
.text
-#ifdef CONFIG_IRQSTACKS
_GLOBAL(call_do_softirq)
mflr r0
std r0,16(r1)
@@ -52,7 +51,6 @@
ld r0,16(r1)
mtlr r0
blr
-#endif /* CONFIG_IRQSTACKS */
.section ".toc","aw"
PPC64_CACHES:
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index f88acf0..139a773 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -9,7 +9,7 @@
#include <linux/threads.h>
#include <linux/module.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/firmware.h>
#include <asm/lppaca.h>
@@ -117,7 +117,7 @@
* the first segment. On iSeries they must be within the area mapped
* by the HV, which is HvPagesToMap * HVPAGESIZE bytes.
*/
- limit = min(0x10000000ULL, lmb.rmo_size);
+ limit = min(0x10000000ULL, memblock.rmo_size);
if (firmware_has_feature(FW_FEATURE_ISERIES))
limit = min(limit, HvPagesToMap * HVPAGESIZE);
@@ -128,7 +128,7 @@
paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpus);
- paca = __va(lmb_alloc_base(paca_size, PAGE_SIZE, limit));
+ paca = __va(memblock_alloc_base(paca_size, PAGE_SIZE, limit));
memset(paca, 0, paca_size);
printk(KERN_DEBUG "Allocated %u bytes for %d pacas at %p\n",
@@ -148,7 +148,7 @@
if (new_size >= paca_size)
return;
- lmb_free(__pa(paca) + new_size, paca_size - new_size);
+ memblock_free(__pa(paca) + new_size, paca_size - new_size);
printk(KERN_DEBUG "Freed %u bytes for unused pacas\n",
paca_size - new_size);
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 6646005..5b38f6a 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1309,6 +1309,7 @@
printk(KERN_WARNING "PCI: Cannot allocate resource region "
"%d of PCI bridge %d, will remap\n", i, bus->number);
clear_resource:
+ res->start = res->end = 0;
res->flags = 0;
}
diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c
index 43b83c3..5c14ffe 100644
--- a/arch/powerpc/kernel/perf_event.c
+++ b/arch/powerpc/kernel/perf_event.c
@@ -791,8 +791,11 @@
cpuhw = &__get_cpu_var(cpu_hw_events);
for (i = 0; i < cpuhw->n_events; ++i) {
if (event == cpuhw->event[i]) {
- while (++i < cpuhw->n_events)
+ while (++i < cpuhw->n_events) {
cpuhw->event[i-1] = cpuhw->event[i];
+ cpuhw->events[i-1] = cpuhw->events[i];
+ cpuhw->flags[i-1] = cpuhw->flags[i];
+ }
--cpuhw->n_events;
ppmu->disable_pmc(event->hw.idx - 1, cpuhw->mmcr);
if (event->hw.idx) {
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index bc9f39d..3b4dcc8 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -101,7 +101,7 @@
EXPORT_SYMBOL(start_thread);
EXPORT_SYMBOL(kernel_thread);
-#ifndef CONFIG_BOOKE
+#ifdef CONFIG_PPC_FPU
EXPORT_SYMBOL_GPL(cvt_df);
EXPORT_SYMBOL_GPL(cvt_fd);
#endif
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 9d255b4..773424d 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1005,7 +1005,6 @@
return error;
}
-#ifdef CONFIG_IRQSTACKS
static inline int valid_irq_stack(unsigned long sp, struct task_struct *p,
unsigned long nbytes)
{
@@ -1030,10 +1029,6 @@
return 0;
}
-#else
-#define valid_irq_stack(sp, p, nb) 0
-#endif /* CONFIG_IRQSTACKS */
-
int validate_sp(unsigned long sp, struct task_struct *p,
unsigned long nbytes)
{
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 05131d6..9d39539 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -31,7 +31,7 @@
#include <linux/kexec.h>
#include <linux/debugfs.h>
#include <linux/irq.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/prom.h>
#include <asm/rtas.h>
@@ -98,7 +98,7 @@
if ((memory_limit && (start + size) > memory_limit) ||
overlaps_crashkernel(start, size)) {
- p = __va(lmb_alloc_base(size, PAGE_SIZE, lmb.rmo_size));
+ p = __va(memblock_alloc_base(size, PAGE_SIZE, memblock.rmo_size));
memcpy(p, initial_boot_params, size);
initial_boot_params = (struct boot_param_header *)p;
DBG("Moved device tree to 0x%p\n", p);
@@ -411,13 +411,13 @@
{
__be32 *dm, *ls, *usm;
unsigned long l, n, flags;
- u64 base, size, lmb_size;
+ u64 base, size, memblock_size;
unsigned int is_kexec_kdump = 0, rngs;
- ls = of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
+ ls = of_get_flat_dt_prop(node, "ibm,memblock-size", &l);
if (ls == NULL || l < dt_root_size_cells * sizeof(__be32))
return 0;
- lmb_size = dt_mem_next_cell(dt_root_size_cells, &ls);
+ memblock_size = dt_mem_next_cell(dt_root_size_cells, &ls);
dm = of_get_flat_dt_prop(node, "ibm,dynamic-memory", &l);
if (dm == NULL || l < sizeof(__be32))
@@ -442,11 +442,11 @@
or if the block is not assigned to this partition (0x8) */
if ((flags & 0x80) || !(flags & 0x8))
continue;
- size = lmb_size;
+ size = memblock_size;
rngs = 1;
if (is_kexec_kdump) {
/*
- * For each lmb in ibm,dynamic-memory, a corresponding
+ * For each memblock in ibm,dynamic-memory, a corresponding
* entry in linux,drconf-usable-memory property contains
* a counter 'p' followed by 'p' (base, size) duple.
* Now read the counter from
@@ -469,10 +469,10 @@
if ((base + size) > 0x80000000ul)
size = 0x80000000ul - base;
}
- lmb_add(base, size);
+ memblock_add(base, size);
} while (--rngs);
}
- lmb_dump_all();
+ memblock_dump_all();
return 0;
}
#else
@@ -501,14 +501,14 @@
}
#endif
- lmb_add(base, size);
+ memblock_add(base, size);
memstart_addr = min((u64)memstart_addr, base);
}
u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
{
- return lmb_alloc(size, align);
+ return memblock_alloc(size, align);
}
#ifdef CONFIG_BLK_DEV_INITRD
@@ -534,12 +534,12 @@
/* before we do anything, lets reserve the dt blob */
self_base = __pa((unsigned long)initial_boot_params);
self_size = initial_boot_params->totalsize;
- lmb_reserve(self_base, self_size);
+ memblock_reserve(self_base, self_size);
#ifdef CONFIG_BLK_DEV_INITRD
/* then reserve the initrd, if any */
if (initrd_start && (initrd_end > initrd_start))
- lmb_reserve(__pa(initrd_start), initrd_end - initrd_start);
+ memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
#endif /* CONFIG_BLK_DEV_INITRD */
#ifdef CONFIG_PPC32
@@ -560,7 +560,7 @@
if (base_32 == self_base && size_32 == self_size)
continue;
DBG("reserving: %x -> %x\n", base_32, size_32);
- lmb_reserve(base_32, size_32);
+ memblock_reserve(base_32, size_32);
}
return;
}
@@ -571,7 +571,7 @@
if (size == 0)
break;
DBG("reserving: %llx -> %llx\n", base, size);
- lmb_reserve(base, size);
+ memblock_reserve(base, size);
}
}
@@ -594,7 +594,7 @@
return phyp_dump_info->reserve_bootvar;
/* divide by 20 to get 5% of value */
- tmp = lmb_end_of_DRAM();
+ tmp = memblock_end_of_DRAM();
do_div(tmp, 20);
/* round it down in multiples of 256 */
@@ -633,11 +633,11 @@
if (phyp_dump_info->phyp_dump_is_active) {
/* Reserve *everything* above RMR.Area freed by userland tools*/
base = variable_reserve_size;
- size = lmb_end_of_DRAM() - base;
+ size = memblock_end_of_DRAM() - base;
/* XXX crashed_ram_end is wrong, since it may be beyond
* the memory_limit, it will need to be adjusted. */
- lmb_reserve(base, size);
+ memblock_reserve(base, size);
phyp_dump_info->init_reserve_start = base;
phyp_dump_info->init_reserve_size = size;
@@ -645,8 +645,8 @@
size = phyp_dump_info->cpu_state_size +
phyp_dump_info->hpte_region_size +
variable_reserve_size;
- base = lmb_end_of_DRAM() - size;
- lmb_reserve(base, size);
+ base = memblock_end_of_DRAM() - size;
+ memblock_reserve(base, size);
phyp_dump_info->init_reserve_start = base;
phyp_dump_info->init_reserve_size = size;
}
@@ -681,8 +681,8 @@
*/
of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
- /* Scan memory nodes and rebuild LMBs */
- lmb_init();
+ /* Scan memory nodes and rebuild MEMBLOCKs */
+ memblock_init();
of_scan_flat_dt(early_init_dt_scan_root, NULL);
of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
@@ -690,11 +690,11 @@
strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
parse_early_param();
- /* Reserve LMB regions used by kernel, initrd, dt, etc... */
- lmb_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
+ /* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
+ memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
/* If relocatable, reserve first 32k for interrupt vectors etc. */
if (PHYSICAL_START > MEMORY_START)
- lmb_reserve(MEMORY_START, 0x8000);
+ memblock_reserve(MEMORY_START, 0x8000);
reserve_kdump_trampoline();
reserve_crashkernel();
early_reserve_mem();
@@ -706,17 +706,17 @@
/* Ensure that total memory size is page-aligned, because
* otherwise mark_bootmem() gets upset. */
- lmb_analyze();
- memsize = lmb_phys_mem_size();
+ memblock_analyze();
+ memsize = memblock_phys_mem_size();
if ((memsize & PAGE_MASK) != memsize)
limit = memsize & PAGE_MASK;
}
- lmb_enforce_memory_limit(limit);
+ memblock_enforce_memory_limit(limit);
- lmb_analyze();
- lmb_dump_all();
+ memblock_analyze();
+ memblock_dump_all();
- DBG("Phys. mem: %llx\n", lmb_phys_mem_size());
+ DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
/* We may need to relocate the flat tree, do it now.
* FIXME .. and the initrd too? */
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 97d4bd9..3b6f8ae 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -872,7 +872,7 @@
"ibm_architecture_vec structure inconsistent: 0x%x !\n",
*cores);
} else {
- *cores = NR_CPUS / prom_count_smt_threads();
+ *cores = DIV_ROUND_UP(NR_CPUS, prom_count_smt_threads());
prom_printf("Max number of cores passed to firmware: 0x%x\n",
(unsigned long)*cores);
}
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index 1ac136b..9f82f49 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -52,12 +52,18 @@
if [ "${UNDEF:0:9}" = "_restgpr_" ]; then
OK=1
fi
+ if [ "${UNDEF:0:10}" = "_restgpr0_" ]; then
+ OK=1
+ fi
if [ "${UNDEF:0:11}" = "_rest32gpr_" ]; then
OK=1
fi
if [ "${UNDEF:0:9}" = "_savegpr_" ]; then
OK=1
fi
+ if [ "${UNDEF:0:10}" = "_savegpr0_" ]; then
+ OK=1
+ fi
if [ "${UNDEF:0:11}" = "_save32gpr_" ]; then
OK=1
fi
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 0e1ec6f..d0516db 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -22,7 +22,7 @@
#include <linux/smp.h>
#include <linux/completion.h>
#include <linux/cpumask.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <linux/slab.h>
#include <asm/prom.h>
@@ -934,11 +934,11 @@
*/
#ifdef CONFIG_PPC64
if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR)) {
- rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX);
+ rtas_region = min(memblock.rmo_size, RTAS_INSTANTIATE_MAX);
ibm_suspend_me_token = rtas_token("ibm,suspend-me");
}
#endif
- rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region);
+ rtas_rmo_buf = memblock_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region);
#ifdef CONFIG_RTAS_ERROR_LOGGING
rtas_last_error_token = rtas_token("rtas-last-error");
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index bfc2aba..67a84d8 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -94,12 +94,8 @@
struct flash_block_list *next;
struct flash_block blocks[FLASH_BLOCKS_PER_NODE];
};
-struct flash_block_list_header { /* just the header of flash_block_list */
- unsigned long num_blocks;
- struct flash_block_list *next;
-};
-static struct flash_block_list_header rtas_firmware_flash_list = {0, NULL};
+static struct flash_block_list *rtas_firmware_flash_list;
/* Use slab cache to guarantee 4k alignment */
static struct kmem_cache *flash_block_cache = NULL;
@@ -108,13 +104,14 @@
/* Local copy of the flash block list.
* We only allow one open of the flash proc file and create this
- * list as we go. This list will be put in the
- * rtas_firmware_flash_list var once it is fully read.
+ * list as we go. The rtas_firmware_flash_list varable will be
+ * set once the data is fully read.
*
* For convenience as we build the list we use virtual addrs,
* we do not fill in the version number, and the length field
* is treated as the number of entries currently in the block
- * (i.e. not a byte count). This is all fixed on release.
+ * (i.e. not a byte count). This is all fixed when calling
+ * the flash routine.
*/
/* Status int must be first member of struct */
@@ -201,16 +198,16 @@
if (uf->flist) {
/* File was opened in write mode for a new flash attempt */
/* Clear saved list */
- if (rtas_firmware_flash_list.next) {
- free_flash_list(rtas_firmware_flash_list.next);
- rtas_firmware_flash_list.next = NULL;
+ if (rtas_firmware_flash_list) {
+ free_flash_list(rtas_firmware_flash_list);
+ rtas_firmware_flash_list = NULL;
}
if (uf->status != FLASH_AUTH)
uf->status = flash_list_valid(uf->flist);
if (uf->status == FLASH_IMG_READY)
- rtas_firmware_flash_list.next = uf->flist;
+ rtas_firmware_flash_list = uf->flist;
else
free_flash_list(uf->flist);
@@ -593,7 +590,7 @@
unsigned long rtas_block_list;
int i, status, update_token;
- if (rtas_firmware_flash_list.next == NULL)
+ if (rtas_firmware_flash_list == NULL)
return; /* nothing to do */
if (reboot_type != SYS_RESTART) {
@@ -610,20 +607,25 @@
return;
}
- /* NOTE: the "first" block list is a global var with no data
- * blocks in the kernel data segment. We do this because
- * we want to ensure this block_list addr is under 4GB.
+ /*
+ * NOTE: the "first" block must be under 4GB, so we create
+ * an entry with no data blocks in the reserved buffer in
+ * the kernel data segment.
*/
- rtas_firmware_flash_list.num_blocks = 0;
- flist = (struct flash_block_list *)&rtas_firmware_flash_list;
+ spin_lock(&rtas_data_buf_lock);
+ flist = (struct flash_block_list *)&rtas_data_buf[0];
+ flist->num_blocks = 0;
+ flist->next = rtas_firmware_flash_list;
rtas_block_list = virt_to_abs(flist);
if (rtas_block_list >= 4UL*1024*1024*1024) {
printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n");
+ spin_unlock(&rtas_data_buf_lock);
return;
}
printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n");
/* Update the block_list in place. */
+ rtas_firmware_flash_list = NULL; /* too hard to backout on error */
image_size = 0;
for (f = flist; f; f = next) {
/* Translate data addrs to absolute */
@@ -664,6 +666,7 @@
printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status);
break;
}
+ spin_unlock(&rtas_data_buf_lock);
}
static void remove_flash_pde(struct proc_dir_entry *dp)
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 5e4d852..b7e6c7e 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -33,7 +33,7 @@
#include <linux/serial_8250.h>
#include <linux/debugfs.h>
#include <linux/percpu.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <linux/of_platform.h>
#include <asm/io.h>
#include <asm/paca.h>
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 8f58986..a10ffc8 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -16,7 +16,7 @@
#include <linux/root_dev.h>
#include <linux/cpu.h>
#include <linux/console.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/io.h>
#include <asm/prom.h>
@@ -241,23 +241,19 @@
arch_initcall(ppc_init);
-#ifdef CONFIG_IRQSTACKS
static void __init irqstack_early_init(void)
{
unsigned int i;
/* interrupt stacks must be in lowmem, we get that for free on ppc32
- * as the lmb is limited to lowmem by LMB_REAL_LIMIT */
+ * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */
for_each_possible_cpu(i) {
softirq_ctx[i] = (struct thread_info *)
- __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+ __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
hardirq_ctx[i] = (struct thread_info *)
- __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+ __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
}
}
-#else
-#define irqstack_early_init()
-#endif
#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
static void __init exc_lvl_early_init(void)
@@ -265,15 +261,15 @@
unsigned int i;
/* interrupt stacks must be in lowmem, we get that for free on ppc32
- * as the lmb is limited to lowmem by LMB_REAL_LIMIT */
+ * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */
for_each_possible_cpu(i) {
critirq_ctx[i] = (struct thread_info *)
- __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+ __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
#ifdef CONFIG_BOOKE
dbgirq_ctx[i] = (struct thread_info *)
- __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+ __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
mcheckirq_ctx[i] = (struct thread_info *)
- __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+ __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
#endif
}
}
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index f3fb5a7..d135f93 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -34,7 +34,7 @@
#include <linux/bootmem.h>
#include <linux/pci.h>
#include <linux/lockdep.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/io.h>
#include <asm/kdump.h>
#include <asm/prom.h>
@@ -158,7 +158,7 @@
* the CPU that ignores the top 2 bits of the address in real
* mode so we can access kernel globals normally provided we
* only toy with things in the RMO region. From here, we do
- * some early parsing of the device-tree to setup out LMB
+ * some early parsing of the device-tree to setup out MEMBLOCK
* data structures, and allocate & initialize the hash table
* and segment tables so we can start running with translation
* enabled.
@@ -404,7 +404,7 @@
printk("-----------------------------------------------------\n");
printk("ppc64_pft_size = 0x%llx\n", ppc64_pft_size);
- printk("physicalMemorySize = 0x%llx\n", lmb_phys_mem_size());
+ printk("physicalMemorySize = 0x%llx\n", memblock_phys_mem_size());
if (ppc64_caches.dline_size != 0x80)
printk("ppc64_caches.dcache_line_size = 0x%x\n",
ppc64_caches.dline_size);
@@ -432,7 +432,6 @@
return 1UL << SID_SHIFT;
}
-#ifdef CONFIG_IRQSTACKS
static void __init irqstack_early_init(void)
{
u64 limit = slb0_limit();
@@ -444,16 +443,13 @@
*/
for_each_possible_cpu(i) {
softirq_ctx[i] = (struct thread_info *)
- __va(lmb_alloc_base(THREAD_SIZE,
+ __va(memblock_alloc_base(THREAD_SIZE,
THREAD_SIZE, limit));
hardirq_ctx[i] = (struct thread_info *)
- __va(lmb_alloc_base(THREAD_SIZE,
+ __va(memblock_alloc_base(THREAD_SIZE,
THREAD_SIZE, limit));
}
}
-#else
-#define irqstack_early_init()
-#endif
#ifdef CONFIG_PPC_BOOK3E
static void __init exc_lvl_early_init(void)
@@ -462,11 +458,11 @@
for_each_possible_cpu(i) {
critirq_ctx[i] = (struct thread_info *)
- __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+ __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
dbgirq_ctx[i] = (struct thread_info *)
- __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+ __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
mcheckirq_ctx[i] = (struct thread_info *)
- __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+ __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
}
}
#else
@@ -491,11 +487,11 @@
* bringup, we need to get at them in real mode. This means they
* must also be within the RMO region.
*/
- limit = min(slb0_limit(), lmb.rmo_size);
+ limit = min(slb0_limit(), memblock.rmo_size);
for_each_possible_cpu(i) {
unsigned long sp;
- sp = lmb_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
+ sp = memblock_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
sp += THREAD_SIZE;
paca[i].emergency_sp = __va(sp);
}
diff --git a/arch/powerpc/kernel/swsusp_booke.S b/arch/powerpc/kernel/swsusp_booke.S
new file mode 100644
index 0000000..11a3930
--- /dev/null
+++ b/arch/powerpc/kernel/swsusp_booke.S
@@ -0,0 +1,193 @@
+/*
+ * Based on swsusp_32.S, modified for FSL BookE by
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ * Copyright (c) 2009-2010 MontaVista Software, LLC.
+ */
+
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/mmu.h>
+
+/*
+ * Structure for storing CPU registers on the save area.
+ */
+#define SL_SP 0
+#define SL_PC 4
+#define SL_MSR 8
+#define SL_TCR 0xc
+#define SL_SPRG0 0x10
+#define SL_SPRG1 0x14
+#define SL_SPRG2 0x18
+#define SL_SPRG3 0x1c
+#define SL_SPRG4 0x20
+#define SL_SPRG5 0x24
+#define SL_SPRG6 0x28
+#define SL_SPRG7 0x2c
+#define SL_TBU 0x30
+#define SL_TBL 0x34
+#define SL_R2 0x38
+#define SL_CR 0x3c
+#define SL_LR 0x40
+#define SL_R12 0x44 /* r12 to r31 */
+#define SL_SIZE (SL_R12 + 80)
+
+ .section .data
+ .align 5
+
+_GLOBAL(swsusp_save_area)
+ .space SL_SIZE
+
+
+ .section .text
+ .align 5
+
+_GLOBAL(swsusp_arch_suspend)
+ lis r11,swsusp_save_area@h
+ ori r11,r11,swsusp_save_area@l
+
+ mflr r0
+ stw r0,SL_LR(r11)
+ mfcr r0
+ stw r0,SL_CR(r11)
+ stw r1,SL_SP(r11)
+ stw r2,SL_R2(r11)
+ stmw r12,SL_R12(r11)
+
+ /* Save MSR & TCR */
+ mfmsr r4
+ stw r4,SL_MSR(r11)
+ mfspr r4,SPRN_TCR
+ stw r4,SL_TCR(r11)
+
+ /* Get a stable timebase and save it */
+1: mfspr r4,SPRN_TBRU
+ stw r4,SL_TBU(r11)
+ mfspr r5,SPRN_TBRL
+ stw r5,SL_TBL(r11)
+ mfspr r3,SPRN_TBRU
+ cmpw r3,r4
+ bne 1b
+
+ /* Save SPRGs */
+ mfsprg r4,0
+ stw r4,SL_SPRG0(r11)
+ mfsprg r4,1
+ stw r4,SL_SPRG1(r11)
+ mfsprg r4,2
+ stw r4,SL_SPRG2(r11)
+ mfsprg r4,3
+ stw r4,SL_SPRG3(r11)
+ mfsprg r4,4
+ stw r4,SL_SPRG4(r11)
+ mfsprg r4,5
+ stw r4,SL_SPRG5(r11)
+ mfsprg r4,6
+ stw r4,SL_SPRG6(r11)
+ mfsprg r4,7
+ stw r4,SL_SPRG7(r11)
+
+ /* Call the low level suspend stuff (we should probably have made
+ * a stackframe...
+ */
+ bl swsusp_save
+
+ /* Restore LR from the save area */
+ lis r11,swsusp_save_area@h
+ ori r11,r11,swsusp_save_area@l
+ lwz r0,SL_LR(r11)
+ mtlr r0
+
+ blr
+
+_GLOBAL(swsusp_arch_resume)
+ sync
+
+ /* Load ptr the list of pages to copy in r3 */
+ lis r11,(restore_pblist)@h
+ ori r11,r11,restore_pblist@l
+ lwz r3,0(r11)
+
+ /* Copy the pages. This is a very basic implementation, to
+ * be replaced by something more cache efficient */
+1:
+ li r0,256
+ mtctr r0
+ lwz r5,pbe_address(r3) /* source */
+ lwz r6,pbe_orig_address(r3) /* destination */
+2:
+ lwz r8,0(r5)
+ lwz r9,4(r5)
+ lwz r10,8(r5)
+ lwz r11,12(r5)
+ addi r5,r5,16
+ stw r8,0(r6)
+ stw r9,4(r6)
+ stw r10,8(r6)
+ stw r11,12(r6)
+ addi r6,r6,16
+ bdnz 2b
+ lwz r3,pbe_next(r3)
+ cmpwi 0,r3,0
+ bne 1b
+
+ bl flush_dcache_L1
+ bl flush_instruction_cache
+
+ lis r11,swsusp_save_area@h
+ ori r11,r11,swsusp_save_area@l
+
+ lwz r4,SL_SPRG0(r11)
+ mtsprg 0,r4
+ lwz r4,SL_SPRG1(r11)
+ mtsprg 1,r4
+ lwz r4,SL_SPRG2(r11)
+ mtsprg 2,r4
+ lwz r4,SL_SPRG3(r11)
+ mtsprg 3,r4
+ lwz r4,SL_SPRG4(r11)
+ mtsprg 4,r4
+ lwz r4,SL_SPRG5(r11)
+ mtsprg 5,r4
+ lwz r4,SL_SPRG6(r11)
+ mtsprg 6,r4
+ lwz r4,SL_SPRG7(r11)
+ mtsprg 7,r4
+
+ /* restore the MSR */
+ lwz r3,SL_MSR(r11)
+ mtmsr r3
+
+ /* Restore TB */
+ li r3,0
+ mtspr SPRN_TBWL,r3
+ lwz r3,SL_TBU(r11)
+ lwz r4,SL_TBL(r11)
+ mtspr SPRN_TBWU,r3
+ mtspr SPRN_TBWL,r4
+
+ /* Restore TCR and clear any pending bits in TSR. */
+ lwz r4,SL_TCR(r11)
+ mtspr SPRN_TCR,r4
+ lis r4, (TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS)@h
+ mtspr SPRN_TSR,r4
+
+ /* Kick decrementer */
+ li r0,1
+ mtdec r0
+
+ /* Restore the callee-saved registers and return */
+ lwz r0,SL_CR(r11)
+ mtcr r0
+ lwz r2,SL_R2(r11)
+ lmw r12,SL_R12(r11)
+ lwz r1,SL_SP(r11)
+ lwz r0,SL_LR(r11)
+ mtlr r0
+
+ li r3,0
+ blr
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 3031fc7..25fc339 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ * Copyright 2007-2010 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -305,7 +306,7 @@
#ifndef CONFIG_FSL_BOOKE
#define get_mc_reason(regs) ((regs)->dsisr)
#else
-#define get_mc_reason(regs) (mfspr(SPRN_MCSR) & MCSR_MASK)
+#define get_mc_reason(regs) (mfspr(SPRN_MCSR))
#endif
#define REASON_FP ESR_FP
#define REASON_ILLEGAL (ESR_PIL | ESR_PUO)
@@ -421,6 +422,91 @@
return 0;
}
#elif defined(CONFIG_E500)
+int machine_check_e500mc(struct pt_regs *regs)
+{
+ unsigned long mcsr = mfspr(SPRN_MCSR);
+ unsigned long reason = mcsr;
+ int recoverable = 1;
+
+ printk("Machine check in kernel mode.\n");
+ printk("Caused by (from MCSR=%lx): ", reason);
+
+ if (reason & MCSR_MCP)
+ printk("Machine Check Signal\n");
+
+ if (reason & MCSR_ICPERR) {
+ printk("Instruction Cache Parity Error\n");
+
+ /*
+ * This is recoverable by invalidating the i-cache.
+ */
+ mtspr(SPRN_L1CSR1, mfspr(SPRN_L1CSR1) | L1CSR1_ICFI);
+ while (mfspr(SPRN_L1CSR1) & L1CSR1_ICFI)
+ ;
+
+ /*
+ * This will generally be accompanied by an instruction
+ * fetch error report -- only treat MCSR_IF as fatal
+ * if it wasn't due to an L1 parity error.
+ */
+ reason &= ~MCSR_IF;
+ }
+
+ if (reason & MCSR_DCPERR_MC) {
+ printk("Data Cache Parity Error\n");
+ recoverable = 0;
+ }
+
+ if (reason & MCSR_L2MMU_MHIT) {
+ printk("Hit on multiple TLB entries\n");
+ recoverable = 0;
+ }
+
+ if (reason & MCSR_NMI)
+ printk("Non-maskable interrupt\n");
+
+ if (reason & MCSR_IF) {
+ printk("Instruction Fetch Error Report\n");
+ recoverable = 0;
+ }
+
+ if (reason & MCSR_LD) {
+ printk("Load Error Report\n");
+ recoverable = 0;
+ }
+
+ if (reason & MCSR_ST) {
+ printk("Store Error Report\n");
+ recoverable = 0;
+ }
+
+ if (reason & MCSR_LDG) {
+ printk("Guarded Load Error Report\n");
+ recoverable = 0;
+ }
+
+ if (reason & MCSR_TLBSYNC)
+ printk("Simultaneous tlbsync operations\n");
+
+ if (reason & MCSR_BSL2_ERR) {
+ printk("Level 2 Cache Error\n");
+ recoverable = 0;
+ }
+
+ if (reason & MCSR_MAV) {
+ u64 addr;
+
+ addr = mfspr(SPRN_MCAR);
+ addr |= (u64)mfspr(SPRN_MCARU) << 32;
+
+ printk("Machine Check %s Address: %#llx\n",
+ reason & MCSR_MEA ? "Effective" : "Physical", addr);
+ }
+
+ mtspr(SPRN_MCSR, mcsr);
+ return mfspr(SPRN_MCSR) == 0 && recoverable;
+}
+
int machine_check_e500(struct pt_regs *regs)
{
unsigned long reason = get_mc_reason(regs);
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index d84d192..13002fe 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -22,7 +22,7 @@
#include <linux/elf.h>
#include <linux/security.h>
#include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/pgtable.h>
#include <asm/system.h>
@@ -734,7 +734,7 @@
vdso_data->platform = machine_is(iseries) ? 0x200 : 0x100;
if (firmware_has_feature(FW_FEATURE_LPAR))
vdso_data->platform |= 1;
- vdso_data->physicalMemorySize = lmb_phys_mem_size();
+ vdso_data->physicalMemorySize = memblock_phys_mem_size();
vdso_data->dcache_size = ppc64_caches.dsize;
vdso_data->dcache_line_size = ppc64_caches.dline_size;
vdso_data->icache_size = ppc64_caches.isize;
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index dcd01c8..8a0deef 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -223,19 +223,17 @@
#endif
/* The initial task and kernel stack */
- .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
- INIT_TASK_DATA(THREAD_SIZE)
- }
+ INIT_TASK_DATA_SECTION(THREAD_SIZE)
- .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
+ .data..page_aligned : AT(ADDR(.data..page_aligned) - LOAD_OFFSET) {
PAGE_ALIGNED_DATA(PAGE_SIZE)
}
- .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
+ .data..cacheline_aligned : AT(ADDR(.data..cacheline_aligned) - LOAD_OFFSET) {
CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
}
- .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
+ .data..read_mostly : AT(ADDR(.data..read_mostly) - LOAD_OFFSET) {
READ_MOSTLY_DATA(L1_CACHE_BYTES)
}
diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c
index bc2b400..e8a00b0 100644
--- a/arch/powerpc/kvm/e500.c
+++ b/arch/powerpc/kvm/e500.c
@@ -164,7 +164,7 @@
return kvm_init(NULL, sizeof(struct kvmppc_vcpu_e500), 0, THIS_MODULE);
}
-static void __init kvmppc_e500_exit(void)
+static void __exit kvmppc_e500_exit(void)
{
kvmppc_booke_exit();
}
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 3040dac..111da1c 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -12,8 +12,8 @@
CFLAGS_REMOVE_feature-fixups.o = -pg
obj-y := string.o alloc.o \
- checksum_$(CONFIG_WORD_SIZE).o
-obj-$(CONFIG_PPC32) += div64.o copy_32.o crtsavres.o
+ checksum_$(CONFIG_WORD_SIZE).o crtsavres.o
+obj-$(CONFIG_PPC32) += div64.o copy_32.o
obj-$(CONFIG_HAS_IOMEM) += devres.o
obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \
diff --git a/arch/powerpc/lib/crtsavres.S b/arch/powerpc/lib/crtsavres.S
index 70a9cd8..1c893f0 100644
--- a/arch/powerpc/lib/crtsavres.S
+++ b/arch/powerpc/lib/crtsavres.S
@@ -6,6 +6,7 @@
* Written By Michael Meissner
*
* Based on gcc/config/rs6000/crtsavres.asm from gcc
+ * 64 bit additions from reading the PPC elf64abi document.
*
* This file is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -44,6 +45,8 @@
#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+#ifndef CONFIG_PPC64
+
/* Routines for saving integer registers, called by the compiler. */
/* Called with r11 pointing to the stack header word of the caller of the */
/* function, just beyond the end of the integer save area. */
@@ -226,4 +229,130 @@
mtlr 0
mr 1,11
blr
+
+#else /* CONFIG_PPC64 */
+
+.globl _savegpr0_14
+_savegpr0_14:
+ std r14,-144(r1)
+.globl _savegpr0_15
+_savegpr0_15:
+ std r15,-136(r1)
+.globl _savegpr0_16
+_savegpr0_16:
+ std r16,-128(r1)
+.globl _savegpr0_17
+_savegpr0_17:
+ std r17,-120(r1)
+.globl _savegpr0_18
+_savegpr0_18:
+ std r18,-112(r1)
+.globl _savegpr0_19
+_savegpr0_19:
+ std r19,-104(r1)
+.globl _savegpr0_20
+_savegpr0_20:
+ std r20,-96(r1)
+.globl _savegpr0_21
+_savegpr0_21:
+ std r21,-88(r1)
+.globl _savegpr0_22
+_savegpr0_22:
+ std r22,-80(r1)
+.globl _savegpr0_23
+_savegpr0_23:
+ std r23,-72(r1)
+.globl _savegpr0_24
+_savegpr0_24:
+ std r24,-64(r1)
+.globl _savegpr0_25
+_savegpr0_25:
+ std r25,-56(r1)
+.globl _savegpr0_26
+_savegpr0_26:
+ std r26,-48(r1)
+.globl _savegpr0_27
+_savegpr0_27:
+ std r27,-40(r1)
+.globl _savegpr0_28
+_savegpr0_28:
+ std r28,-32(r1)
+.globl _savegpr0_29
+_savegpr0_29:
+ std r29,-24(r1)
+.globl _savegpr0_30
+_savegpr0_30:
+ std r30,-16(r1)
+.globl _savegpr0_31
+_savegpr0_31:
+ std r31,-8(r1)
+ std r0,16(r1)
+ blr
+
+.globl _restgpr0_14
+_restgpr0_14:
+ ld r14,-144(r1)
+.globl _restgpr0_15
+_restgpr0_15:
+ ld r15,-136(r1)
+.globl _restgpr0_16
+_restgpr0_16:
+ ld r16,-128(r1)
+.globl _restgpr0_17
+_restgpr0_17:
+ ld r17,-120(r1)
+.globl _restgpr0_18
+_restgpr0_18:
+ ld r18,-112(r1)
+.globl _restgpr0_19
+_restgpr0_19:
+ ld r19,-104(r1)
+.globl _restgpr0_20
+_restgpr0_20:
+ ld r20,-96(r1)
+.globl _restgpr0_21
+_restgpr0_21:
+ ld r21,-88(r1)
+.globl _restgpr0_22
+_restgpr0_22:
+ ld r22,-80(r1)
+.globl _restgpr0_23
+_restgpr0_23:
+ ld r23,-72(r1)
+.globl _restgpr0_24
+_restgpr0_24:
+ ld r24,-64(r1)
+.globl _restgpr0_25
+_restgpr0_25:
+ ld r25,-56(r1)
+.globl _restgpr0_26
+_restgpr0_26:
+ ld r26,-48(r1)
+.globl _restgpr0_27
+_restgpr0_27:
+ ld r27,-40(r1)
+.globl _restgpr0_28
+_restgpr0_28:
+ ld r28,-32(r1)
+.globl _restgpr0_29
+_restgpr0_29:
+ ld r0,16(r1)
+ ld r29,-24(r1)
+ mtlr r0
+ ld r30,-16(r1)
+ ld r31,-8(r1)
+ blr
+
+.globl _restgpr0_30
+_restgpr0_30:
+ ld r30,-16(r1)
+.globl _restgpr0_31
+_restgpr0_31:
+ ld r0,16(r1)
+ ld r31,-8(r1)
+ mtlr r0
+ blr
+
+#endif /* CONFIG_PPC64 */
+
#endif
diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c
index e640175..0d08d01 100644
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -12,6 +12,7 @@
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/init.h>
@@ -288,8 +289,8 @@
static void test_cpu_macros(void)
{
- extern void ftr_fixup_test_FTR_macros;
- extern void ftr_fixup_test_FTR_macros_expected;
+ extern u8 ftr_fixup_test_FTR_macros;
+ extern u8 ftr_fixup_test_FTR_macros_expected;
unsigned long size = &ftr_fixup_test_FTR_macros_expected -
&ftr_fixup_test_FTR_macros;
@@ -301,8 +302,8 @@
static void test_fw_macros(void)
{
#ifdef CONFIG_PPC64
- extern void ftr_fixup_test_FW_FTR_macros;
- extern void ftr_fixup_test_FW_FTR_macros_expected;
+ extern u8 ftr_fixup_test_FW_FTR_macros;
+ extern u8 ftr_fixup_test_FW_FTR_macros_expected;
unsigned long size = &ftr_fixup_test_FW_FTR_macros_expected -
&ftr_fixup_test_FW_FTR_macros;
@@ -314,10 +315,10 @@
static void test_lwsync_macros(void)
{
- extern void lwsync_fixup_test;
- extern void end_lwsync_fixup_test;
- extern void lwsync_fixup_test_expected_LWSYNC;
- extern void lwsync_fixup_test_expected_SYNC;
+ extern u8 lwsync_fixup_test;
+ extern u8 end_lwsync_fixup_test;
+ extern u8 lwsync_fixup_test_expected_LWSYNC;
+ extern u8 lwsync_fixup_test_expected_SYNC;
unsigned long size = &end_lwsync_fixup_test -
&lwsync_fixup_test;
diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c
index 65abfcf..1dc2fa5 100644
--- a/arch/powerpc/mm/40x_mmu.c
+++ b/arch/powerpc/mm/40x_mmu.c
@@ -135,7 +135,7 @@
/* If the size of RAM is not an exact power of two, we may not
* have covered RAM in its entirety with 16 and 4 MiB
* pages. Consequently, restrict the top end of RAM currently
- * allocable so that calls to the LMB to allocate PTEs for "tail"
+ * allocable so that calls to the MEMBLOCK to allocate PTEs for "tail"
* coverage with normal-sized pages (or other reasons) do not
* attempt to allocate outside the allowed range.
*/
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 3ecdcec..98f262d 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -31,7 +31,7 @@
#include <linux/cache.h>
#include <linux/init.h>
#include <linux/signal.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
@@ -384,8 +384,8 @@
printk(KERN_INFO "Huge page(16GB) memory: "
"addr = 0x%lX size = 0x%lX pages = %d\n",
phys_addr, block_size, expected_pages);
- if (phys_addr + (16 * GB) <= lmb_end_of_DRAM()) {
- lmb_reserve(phys_addr, block_size * expected_pages);
+ if (phys_addr + (16 * GB) <= memblock_end_of_DRAM()) {
+ memblock_reserve(phys_addr, block_size * expected_pages);
add_gpage(phys_addr, block_size, expected_pages);
}
return 0;
@@ -458,7 +458,7 @@
* and we have at least 1G of RAM at boot
*/
if (mmu_psize_defs[MMU_PAGE_16M].shift &&
- lmb_phys_mem_size() >= 0x40000000)
+ memblock_phys_mem_size() >= 0x40000000)
mmu_vmemmap_psize = MMU_PAGE_16M;
else if (mmu_psize_defs[MMU_PAGE_64K].shift)
mmu_vmemmap_psize = MMU_PAGE_64K;
@@ -520,7 +520,7 @@
return 1UL << ppc64_pft_size;
/* round mem_size up to next power of 2 */
- mem_size = lmb_phys_mem_size();
+ mem_size = memblock_phys_mem_size();
rnd_mem_size = 1UL << __ilog2(mem_size);
if (rnd_mem_size < mem_size)
rnd_mem_size <<= 1;
@@ -627,7 +627,7 @@
else
limit = 0;
- table = lmb_alloc_base(htab_size_bytes, htab_size_bytes, limit);
+ table = memblock_alloc_base(htab_size_bytes, htab_size_bytes, limit);
DBG("Hash table allocated at %lx, size: %lx\n", table,
htab_size_bytes);
@@ -647,9 +647,9 @@
prot = pgprot_val(PAGE_KERNEL);
#ifdef CONFIG_DEBUG_PAGEALLOC
- linear_map_hash_count = lmb_end_of_DRAM() >> PAGE_SHIFT;
- linear_map_hash_slots = __va(lmb_alloc_base(linear_map_hash_count,
- 1, lmb.rmo_size));
+ linear_map_hash_count = memblock_end_of_DRAM() >> PAGE_SHIFT;
+ linear_map_hash_slots = __va(memblock_alloc_base(linear_map_hash_count,
+ 1, memblock.rmo_size));
memset(linear_map_hash_slots, 0, linear_map_hash_count);
#endif /* CONFIG_DEBUG_PAGEALLOC */
@@ -659,16 +659,16 @@
*/
/* create bolted the linear mapping in the hash table */
- for (i=0; i < lmb.memory.cnt; i++) {
- base = (unsigned long)__va(lmb.memory.region[i].base);
- size = lmb.memory.region[i].size;
+ for (i=0; i < memblock.memory.cnt; i++) {
+ base = (unsigned long)__va(memblock.memory.region[i].base);
+ size = memblock.memory.region[i].size;
DBG("creating mapping for region: %lx..%lx (prot: %lx)\n",
base, size, prot);
#ifdef CONFIG_U3_DART
/* Do not map the DART space. Fortunately, it will be aligned
- * in such a way that it will not cross two lmb regions and
+ * in such a way that it will not cross two memblock regions and
* will fit within a single 16Mb page.
* The DART space is assumed to be a full 16Mb region even if
* we only use 2Mb of that space. We will use more of it later
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 7673330..6a6975d 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -30,7 +30,7 @@
#include <linux/highmem.h>
#include <linux/initrd.h>
#include <linux/pagemap.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <linux/gfp.h>
#include <asm/pgalloc.h>
@@ -136,17 +136,17 @@
/* parse args from command line */
MMU_setup();
- if (lmb.memory.cnt > 1) {
+ if (memblock.memory.cnt > 1) {
#ifndef CONFIG_WII
- lmb.memory.cnt = 1;
- lmb_analyze();
+ memblock.memory.cnt = 1;
+ memblock_analyze();
printk(KERN_WARNING "Only using first contiguous memory region");
#else
wii_memory_fixups();
#endif
}
- total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr;
+ total_lowmem = total_memory = memblock_end_of_DRAM() - memstart_addr;
lowmem_end_addr = memstart_addr + total_lowmem;
#ifdef CONFIG_FSL_BOOKE
@@ -161,8 +161,8 @@
lowmem_end_addr = memstart_addr + total_lowmem;
#ifndef CONFIG_HIGHMEM
total_memory = total_lowmem;
- lmb_enforce_memory_limit(lowmem_end_addr);
- lmb_analyze();
+ memblock_enforce_memory_limit(lowmem_end_addr);
+ memblock_analyze();
#endif /* CONFIG_HIGHMEM */
}
@@ -200,7 +200,7 @@
if (init_bootmem_done) {
p = alloc_bootmem_pages(PAGE_SIZE);
} else {
- p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
+ p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
__initial_memory_limit_addr));
}
return p;
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index e267f22..71f1415 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -40,7 +40,7 @@
#include <linux/nodemask.h>
#include <linux/module.h>
#include <linux/poison.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <linux/hugetlb.h>
#include <linux/slab.h>
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 0f594d7..1a84a8d 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -32,7 +32,7 @@
#include <linux/initrd.h>
#include <linux/pagemap.h>
#include <linux/suspend.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <linux/hugetlb.h>
#include <asm/pgalloc.h>
@@ -83,13 +83,13 @@
#else
unsigned long paddr = (pfn << PAGE_SHIFT);
int i;
- for (i=0; i < lmb.memory.cnt; i++) {
+ for (i=0; i < memblock.memory.cnt; i++) {
unsigned long base;
- base = lmb.memory.region[i].base;
+ base = memblock.memory.region[i].base;
if ((paddr >= base) &&
- (paddr < (base + lmb.memory.region[i].size))) {
+ (paddr < (base + memblock.memory.region[i].size))) {
return 1;
}
}
@@ -142,14 +142,14 @@
/*
* walk_memory_resource() needs to make sure there is no holes in a given
* memory range. PPC64 does not maintain the memory layout in /proc/iomem.
- * Instead it maintains it in lmb.memory structures. Walk through the
+ * Instead it maintains it in memblock.memory structures. Walk through the
* memory regions, find holes and callback for contiguous regions.
*/
int
walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages,
void *arg, int (*func)(unsigned long, unsigned long, void *))
{
- struct lmb_property res;
+ struct memblock_property res;
unsigned long pfn, len;
u64 end;
int ret = -1;
@@ -158,7 +158,7 @@
res.size = (u64) nr_pages << PAGE_SHIFT;
end = res.base + res.size - 1;
- while ((res.base < end) && (lmb_find(&res) >= 0)) {
+ while ((res.base < end) && (memblock_find(&res) >= 0)) {
pfn = (unsigned long)(res.base >> PAGE_SHIFT);
len = (unsigned long)(res.size >> PAGE_SHIFT);
ret = (*func)(pfn, len, arg);
@@ -184,8 +184,8 @@
unsigned long total_pages;
int boot_mapsize;
- max_low_pfn = max_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
- total_pages = (lmb_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT;
+ max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
+ total_pages = (memblock_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT;
#ifdef CONFIG_HIGHMEM
total_pages = total_lowmem >> PAGE_SHIFT;
max_low_pfn = lowmem_end_addr >> PAGE_SHIFT;
@@ -198,16 +198,16 @@
*/
bootmap_pages = bootmem_bootmap_pages(total_pages);
- start = lmb_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
+ start = memblock_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
min_low_pfn = MEMORY_START >> PAGE_SHIFT;
boot_mapsize = init_bootmem_node(NODE_DATA(0), start >> PAGE_SHIFT, min_low_pfn, max_low_pfn);
/* Add active regions with valid PFNs */
- for (i = 0; i < lmb.memory.cnt; i++) {
+ for (i = 0; i < memblock.memory.cnt; i++) {
unsigned long start_pfn, end_pfn;
- start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
- end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+ start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT;
+ end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i);
add_active_range(0, start_pfn, end_pfn);
}
@@ -218,17 +218,17 @@
free_bootmem_with_active_regions(0, lowmem_end_addr >> PAGE_SHIFT);
/* reserve the sections we're already using */
- for (i = 0; i < lmb.reserved.cnt; i++) {
- unsigned long addr = lmb.reserved.region[i].base +
- lmb_size_bytes(&lmb.reserved, i) - 1;
+ for (i = 0; i < memblock.reserved.cnt; i++) {
+ unsigned long addr = memblock.reserved.region[i].base +
+ memblock_size_bytes(&memblock.reserved, i) - 1;
if (addr < lowmem_end_addr)
- reserve_bootmem(lmb.reserved.region[i].base,
- lmb_size_bytes(&lmb.reserved, i),
+ reserve_bootmem(memblock.reserved.region[i].base,
+ memblock_size_bytes(&memblock.reserved, i),
BOOTMEM_DEFAULT);
- else if (lmb.reserved.region[i].base < lowmem_end_addr) {
+ else if (memblock.reserved.region[i].base < lowmem_end_addr) {
unsigned long adjusted_size = lowmem_end_addr -
- lmb.reserved.region[i].base;
- reserve_bootmem(lmb.reserved.region[i].base,
+ memblock.reserved.region[i].base;
+ reserve_bootmem(memblock.reserved.region[i].base,
adjusted_size, BOOTMEM_DEFAULT);
}
}
@@ -236,9 +236,9 @@
free_bootmem_with_active_regions(0, max_pfn);
/* reserve the sections we're already using */
- for (i = 0; i < lmb.reserved.cnt; i++)
- reserve_bootmem(lmb.reserved.region[i].base,
- lmb_size_bytes(&lmb.reserved, i),
+ for (i = 0; i < memblock.reserved.cnt; i++)
+ reserve_bootmem(memblock.reserved.region[i].base,
+ memblock_size_bytes(&memblock.reserved, i),
BOOTMEM_DEFAULT);
#endif
@@ -251,20 +251,20 @@
/* mark pages that don't exist as nosave */
static int __init mark_nonram_nosave(void)
{
- unsigned long lmb_next_region_start_pfn,
- lmb_region_max_pfn;
+ unsigned long memblock_next_region_start_pfn,
+ memblock_region_max_pfn;
int i;
- for (i = 0; i < lmb.memory.cnt - 1; i++) {
- lmb_region_max_pfn =
- (lmb.memory.region[i].base >> PAGE_SHIFT) +
- (lmb.memory.region[i].size >> PAGE_SHIFT);
- lmb_next_region_start_pfn =
- lmb.memory.region[i+1].base >> PAGE_SHIFT;
+ for (i = 0; i < memblock.memory.cnt - 1; i++) {
+ memblock_region_max_pfn =
+ (memblock.memory.region[i].base >> PAGE_SHIFT) +
+ (memblock.memory.region[i].size >> PAGE_SHIFT);
+ memblock_next_region_start_pfn =
+ memblock.memory.region[i+1].base >> PAGE_SHIFT;
- if (lmb_region_max_pfn < lmb_next_region_start_pfn)
- register_nosave_region(lmb_region_max_pfn,
- lmb_next_region_start_pfn);
+ if (memblock_region_max_pfn < memblock_next_region_start_pfn)
+ register_nosave_region(memblock_region_max_pfn,
+ memblock_next_region_start_pfn);
}
return 0;
@@ -275,8 +275,8 @@
*/
void __init paging_init(void)
{
- unsigned long total_ram = lmb_phys_mem_size();
- phys_addr_t top_of_ram = lmb_end_of_DRAM();
+ unsigned long total_ram = memblock_phys_mem_size();
+ phys_addr_t top_of_ram = memblock_end_of_DRAM();
unsigned long max_zone_pfns[MAX_NR_ZONES];
#ifdef CONFIG_PPC32
@@ -327,7 +327,7 @@
swiotlb_init(1);
#endif
- num_physpages = lmb.memory.size >> PAGE_SHIFT;
+ num_physpages = memblock.memory.size >> PAGE_SHIFT;
high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
#ifdef CONFIG_NEED_MULTIPLE_NODES
@@ -364,7 +364,7 @@
highmem_mapnr = lowmem_end_addr >> PAGE_SHIFT;
for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
struct page *page = pfn_to_page(pfn);
- if (lmb_is_reserved(pfn << PAGE_SHIFT))
+ if (memblock_is_reserved(pfn << PAGE_SHIFT))
continue;
ClearPageReserved(page);
init_page_count(page);
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 80d1106..f473645 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -17,7 +17,7 @@
#include <linux/nodemask.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <linux/of.h>
#include <linux/pfn.h>
#include <asm/sparsemem.h>
@@ -351,7 +351,7 @@
#define DRCONF_MEM_RESERVED 0x00000080
/*
- * Read the next lmb list entry from the ibm,dynamic-memory property
+ * Read the next memblock list entry from the ibm,dynamic-memory property
* and return the information in the provided of_drconf_cell structure.
*/
static void read_drconf_cell(struct of_drconf_cell *drmem, const u32 **cellp)
@@ -372,8 +372,8 @@
/*
* Retreive and validate the ibm,dynamic-memory property of the device tree.
*
- * The layout of the ibm,dynamic-memory property is a number N of lmb
- * list entries followed by N lmb list entries. Each lmb list entry
+ * The layout of the ibm,dynamic-memory property is a number N of memblock
+ * list entries followed by N memblock list entries. Each memblock list entry
* contains information as layed out in the of_drconf_cell struct above.
*/
static int of_get_drconf_memory(struct device_node *memory, const u32 **dm)
@@ -398,15 +398,15 @@
}
/*
- * Retreive and validate the ibm,lmb-size property for drconf memory
+ * Retreive and validate the ibm,memblock-size property for drconf memory
* from the device tree.
*/
-static u64 of_get_lmb_size(struct device_node *memory)
+static u64 of_get_memblock_size(struct device_node *memory)
{
const u32 *prop;
u32 len;
- prop = of_get_property(memory, "ibm,lmb-size", &len);
+ prop = of_get_property(memory, "ibm,memblock-size", &len);
if (!prop || len < sizeof(unsigned int))
return 0;
@@ -540,19 +540,19 @@
unsigned long size)
{
/*
- * We use lmb_end_of_DRAM() in here instead of memory_limit because
+ * We use memblock_end_of_DRAM() in here instead of memory_limit because
* we've already adjusted it for the limit and it takes care of
* having memory holes below the limit. Also, in the case of
* iommu_is_off, memory_limit is not set but is implicitly enforced.
*/
- if (start + size <= lmb_end_of_DRAM())
+ if (start + size <= memblock_end_of_DRAM())
return size;
- if (start >= lmb_end_of_DRAM())
+ if (start >= memblock_end_of_DRAM())
return 0;
- return lmb_end_of_DRAM() - start;
+ return memblock_end_of_DRAM() - start;
}
/*
@@ -562,7 +562,7 @@
static inline int __init read_usm_ranges(const u32 **usm)
{
/*
- * For each lmb in ibm,dynamic-memory a corresponding
+ * For each memblock in ibm,dynamic-memory a corresponding
* entry in linux,drconf-usable-memory property contains
* a counter followed by that many (base, size) duple.
* read the counter from linux,drconf-usable-memory
@@ -578,7 +578,7 @@
{
const u32 *dm, *usm;
unsigned int n, rc, ranges, is_kexec_kdump = 0;
- unsigned long lmb_size, base, size, sz;
+ unsigned long memblock_size, base, size, sz;
int nid;
struct assoc_arrays aa;
@@ -586,8 +586,8 @@
if (!n)
return;
- lmb_size = of_get_lmb_size(memory);
- if (!lmb_size)
+ memblock_size = of_get_memblock_size(memory);
+ if (!memblock_size)
return;
rc = of_get_assoc_arrays(memory, &aa);
@@ -611,7 +611,7 @@
continue;
base = drmem.base_addr;
- size = lmb_size;
+ size = memblock_size;
ranges = 1;
if (is_kexec_kdump) {
@@ -731,7 +731,7 @@
}
/*
- * Now do the same thing for each LMB listed in the ibm,dynamic-memory
+ * Now do the same thing for each MEMBLOCK listed in the ibm,dynamic-memory
* property in the ibm,dynamic-reconfiguration-memory node.
*/
memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
@@ -743,8 +743,8 @@
static void __init setup_nonnuma(void)
{
- unsigned long top_of_ram = lmb_end_of_DRAM();
- unsigned long total_ram = lmb_phys_mem_size();
+ unsigned long top_of_ram = memblock_end_of_DRAM();
+ unsigned long total_ram = memblock_phys_mem_size();
unsigned long start_pfn, end_pfn;
unsigned int i, nid = 0;
@@ -753,9 +753,9 @@
printk(KERN_DEBUG "Memory hole size: %ldMB\n",
(top_of_ram - total_ram) >> 20);
- for (i = 0; i < lmb.memory.cnt; ++i) {
- start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
- end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+ for (i = 0; i < memblock.memory.cnt; ++i) {
+ start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT;
+ end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i);
fake_numa_create_new_node(end_pfn, &nid);
add_active_range(nid, start_pfn, end_pfn);
@@ -813,7 +813,7 @@
count = 0;
- for (i = 0; i < lmb_end_of_DRAM();
+ for (i = 0; i < memblock_end_of_DRAM();
i += (1 << SECTION_SIZE_BITS)) {
if (early_pfn_to_nid(i >> PAGE_SHIFT) == node) {
if (count == 0)
@@ -833,7 +833,7 @@
}
/*
- * Allocate some memory, satisfying the lmb or bootmem allocator where
+ * Allocate some memory, satisfying the memblock or bootmem allocator where
* required. nid is the preferred node and end is the physical address of
* the highest address in the node.
*
@@ -847,11 +847,11 @@
int new_nid;
unsigned long ret_paddr;
- ret_paddr = __lmb_alloc_base(size, align, end_pfn << PAGE_SHIFT);
+ ret_paddr = __memblock_alloc_base(size, align, end_pfn << PAGE_SHIFT);
/* retry over all memory */
if (!ret_paddr)
- ret_paddr = __lmb_alloc_base(size, align, lmb_end_of_DRAM());
+ ret_paddr = __memblock_alloc_base(size, align, memblock_end_of_DRAM());
if (!ret_paddr)
panic("numa.c: cannot allocate %lu bytes for node %d",
@@ -861,14 +861,14 @@
/*
* We initialize the nodes in numeric order: 0, 1, 2...
- * and hand over control from the LMB allocator to the
+ * and hand over control from the MEMBLOCK allocator to the
* bootmem allocator. If this function is called for
* node 5, then we know that all nodes <5 are using the
- * bootmem allocator instead of the LMB allocator.
+ * bootmem allocator instead of the MEMBLOCK allocator.
*
* So, check the nid from which this allocation came
* and double check to see if we need to use bootmem
- * instead of the LMB. We don't free the LMB memory
+ * instead of the MEMBLOCK. We don't free the MEMBLOCK memory
* since it would be useless.
*/
new_nid = early_pfn_to_nid(ret_paddr >> PAGE_SHIFT);
@@ -893,9 +893,9 @@
struct pglist_data *node = NODE_DATA(nid);
int i;
- for (i = 0; i < lmb.reserved.cnt; i++) {
- unsigned long physbase = lmb.reserved.region[i].base;
- unsigned long size = lmb.reserved.region[i].size;
+ for (i = 0; i < memblock.reserved.cnt; i++) {
+ unsigned long physbase = memblock.reserved.region[i].base;
+ unsigned long size = memblock.reserved.region[i].size;
unsigned long start_pfn = physbase >> PAGE_SHIFT;
unsigned long end_pfn = PFN_UP(physbase + size);
struct node_active_region node_ar;
@@ -903,7 +903,7 @@
node->node_spanned_pages;
/*
- * Check to make sure that this lmb.reserved area is
+ * Check to make sure that this memblock.reserved area is
* within the bounds of the node that we care about.
* Checking the nid of the start and end points is not
* sufficient because the reserved area could span the
@@ -961,7 +961,7 @@
int nid;
min_low_pfn = 0;
- max_low_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
+ max_low_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
max_pfn = max_low_pfn;
if (parse_numa_properties())
@@ -1038,7 +1038,7 @@
{
unsigned long max_zone_pfns[MAX_NR_ZONES];
memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
- max_zone_pfns[ZONE_DMA] = lmb_end_of_DRAM() >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_DMA] = memblock_end_of_DRAM() >> PAGE_SHIFT;
free_area_init_nodes(max_zone_pfns);
}
@@ -1072,7 +1072,7 @@
{
const u32 *dm;
unsigned int drconf_cell_cnt, rc;
- unsigned long lmb_size;
+ unsigned long memblock_size;
struct assoc_arrays aa;
int nid = -1;
@@ -1080,8 +1080,8 @@
if (!drconf_cell_cnt)
return -1;
- lmb_size = of_get_lmb_size(memory);
- if (!lmb_size)
+ memblock_size = of_get_memblock_size(memory);
+ if (!memblock_size)
return -1;
rc = of_get_assoc_arrays(memory, &aa);
@@ -1100,7 +1100,7 @@
continue;
if ((scn_addr < drmem.base_addr)
- || (scn_addr >= (drmem.base_addr + lmb_size)))
+ || (scn_addr >= (drmem.base_addr + memblock_size)))
continue;
nid = of_drconf_to_nid_single(&drmem, &aa);
@@ -1113,7 +1113,7 @@
/*
* Find the node associated with a hot added memory section for memory
* represented in the device tree as a node (i.e. memory@XXXX) for
- * each lmb.
+ * each memblock.
*/
int hot_add_node_scn_to_nid(unsigned long scn_addr)
{
@@ -1154,8 +1154,8 @@
/*
* Find the node associated with a hot added memory section. Section
- * corresponds to a SPARSEMEM section, not an LMB. It is assumed that
- * sections are fully contained within a single LMB.
+ * corresponds to a SPARSEMEM section, not an MEMBLOCK. It is assumed that
+ * sections are fully contained within a single MEMBLOCK.
*/
int hot_add_scn_to_nid(unsigned long scn_addr)
{
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 9fc02dc..a87ead0 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -26,7 +26,7 @@
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <linux/highmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <linux/slab.h>
#include <asm/pgtable.h>
@@ -115,11 +115,7 @@
{
struct page *ptepage;
-#ifdef CONFIG_HIGHPTE
- gfp_t flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT | __GFP_ZERO;
-#else
gfp_t flags = GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO;
-#endif
ptepage = alloc_pages(flags, 0);
if (!ptepage)
@@ -202,7 +198,7 @@
* mem_init() sets high_memory so only do the check after that.
*/
if (mem_init_done && (p < virt_to_phys(high_memory)) &&
- !(__allow_ioremap_reserved && lmb_is_region_reserved(p, size))) {
+ !(__allow_ioremap_reserved && memblock_is_region_reserved(p, size))) {
printk("__ioremap(): phys addr 0x%llx is RAM lr %p\n",
(unsigned long long)p, __builtin_return_address(0));
return NULL;
@@ -335,7 +331,7 @@
s = mmu_mapin_ram(top);
__mapin_ram_chunk(s, top);
- top = lmb_end_of_DRAM();
+ top = memblock_end_of_DRAM();
s = wii_mmu_mapin_mem2(top);
__mapin_ram_chunk(s, top);
}
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index d050fc8..21d6dfa 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -34,7 +34,7 @@
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <linux/slab.h>
#include <asm/pgalloc.h>
@@ -67,7 +67,7 @@
if (init_bootmem_done)
pt = __alloc_bootmem(size, size, __pa(MAX_DMA_ADDRESS));
else
- pt = __va(lmb_alloc_base(size, size,
+ pt = __va(memblock_alloc_base(size, size,
__pa(MAX_DMA_ADDRESS)));
memset(pt, 0, size);
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index f11c2cd..f8a0182 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -26,7 +26,7 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/highmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/prom.h>
#include <asm/mmu.h>
@@ -223,7 +223,7 @@
* Find some memory for the hash table.
*/
if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322);
- Hash = __va(lmb_alloc_base(Hash_size, Hash_size,
+ Hash = __va(memblock_alloc_base(Hash_size, Hash_size,
__initial_memory_limit_addr));
cacheable_memzero(Hash, Hash_size);
_SDR1 = __pa(Hash) | SDR1_LOW_BITS;
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index 687fdda..446a018 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -12,7 +12,7 @@
* 2 of the License, or (at your option) any later version.
*/
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/pgtable.h>
#include <asm/mmu.h>
@@ -252,7 +252,7 @@
if (cpu == 0)
continue; /* stab for CPU 0 is statically allocated */
- newstab = lmb_alloc_base(HW_PAGE_SIZE, HW_PAGE_SIZE,
+ newstab = memblock_alloc_base(HW_PAGE_SIZE, HW_PAGE_SIZE,
1<<SID_SHIFT);
newstab = (unsigned long)__va(newstab);
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index e81d5d6..d8695b0 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -34,7 +34,7 @@
#include <linux/pagemap.h>
#include <linux/preempt.h>
#include <linux/spinlock.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/tlbflush.h>
#include <asm/tlb.h>
@@ -426,7 +426,7 @@
/* Set the global containing the top of the linear mapping
* for use by the TLB miss code
*/
- linear_map_top = lmb_end_of_DRAM();
+ linear_map_top = memblock_end_of_DRAM();
/* A sync won't hurt us after mucking around with
* the MMU configuration
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 2c9e522..7fd90d0 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -1077,7 +1077,7 @@
index = ENTRIES-1;
/* make sure index is valid */
- if ((index > ENTRIES) || (index < 0))
+ if ((index >= ENTRIES) || (index < 0))
index = ENTRIES-1;
return initial_lfsr[index];
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index eeba0a7..69d668c 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -171,6 +171,17 @@
help
This option enables support for the IBM ISS simulation environment
+config ICON
+ bool "Icon"
+ depends on 44x
+ default n
+ select PPC44x_SIMPLE
+ select 440SPe
+ select PCI
+ select PPC4xx_PCI_EXPRESS
+ help
+ This option enables support for the AMCC PPC440SPe evaluation board.
+
#config LUAN
# bool "Luan"
# depends on 44x
diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c
index e8c23cc..5f7a29d 100644
--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
@@ -61,7 +61,8 @@
"amcc,redwood",
"amcc,sequoia",
"amcc,taishan",
- "amcc,yosemite"
+ "amcc,yosemite",
+ "mosaixtech,icon"
};
static int __init ppc44x_probe(void)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pm.c b/arch/powerpc/platforms/52xx/mpc52xx_pm.c
index a55b0b6..7672253 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pm.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pm.c
@@ -64,10 +64,19 @@
{ .type = "builtin", .compatible = "mpc5200", }, /* efika */
{}
};
+ struct resource res;
/* map the whole register space */
np = of_find_matching_node(NULL, immr_ids);
- mbar = of_iomap(np, 0);
+
+ if (of_address_to_resource(np, 0, &res)) {
+ pr_err("mpc52xx_pm_prepare(): could not get IMMR address\n");
+ of_node_put(np);
+ return -ENOSYS;
+ }
+
+ mbar = ioremap(res.start, 0xc000); /* we should map whole region including SRAM */
+
of_node_put(np);
if (!mbar) {
pr_err("mpc52xx_pm_prepare(): could not map registers\n");
diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c
index 534c2ec..2ab338c 100644
--- a/arch/powerpc/platforms/85xx/corenet_ds.c
+++ b/arch/powerpc/platforms/85xx/corenet_ds.c
@@ -16,7 +16,7 @@
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/system.h>
#include <asm/time.h>
@@ -100,7 +100,7 @@
#endif
#ifdef CONFIG_SWIOTLB
- if (lmb_end_of_DRAM() > max) {
+ if (memblock_end_of_DRAM() > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 004b7d3..f79f2f1 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -17,7 +17,7 @@
#include <linux/seq_file.h>
#include <linux/interrupt.h>
#include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/system.h>
#include <asm/time.h>
@@ -94,7 +94,7 @@
#endif
#ifdef CONFIG_SWIOTLB
- if (lmb_end_of_DRAM() > max) {
+ if (memblock_end_of_DRAM() > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 544011a..8190bc2 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -20,7 +20,7 @@
#include <linux/seq_file.h>
#include <linux/interrupt.h>
#include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/system.h>
#include <asm/time.h>
@@ -190,7 +190,7 @@
#endif
#ifdef CONFIG_SWIOTLB
- if (lmb_end_of_DRAM() > max) {
+ if (memblock_end_of_DRAM() > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index f0684c8..4945136 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) Freescale Semicondutor, Inc. 2006-2007. All rights reserved.
+ * Copyright (C) Freescale Semicondutor, Inc. 2006-2010. All rights reserved.
*
* Author: Andy Fleming <afleming@freescale.com>
*
@@ -33,7 +33,7 @@
#include <linux/of_platform.h>
#include <linux/of_device.h>
#include <linux/phy.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/system.h>
#include <asm/atomic.h>
@@ -154,6 +154,10 @@
* Setup the architecture
*
*/
+#ifdef CONFIG_SMP
+extern void __init mpc85xx_smp_init(void);
+#endif
+
static void __init mpc85xx_mds_setup_arch(void)
{
struct device_node *np;
@@ -194,6 +198,10 @@
}
#endif
+#ifdef CONFIG_SMP
+ mpc85xx_smp_init();
+#endif
+
#ifdef CONFIG_QUICC_ENGINE
np = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!np) {
@@ -271,13 +279,53 @@
BCSR_UCC_RGMII, BCSR_UCC_RTBI);
}
+ } else if (machine_is(p1021_mds)) {
+#define BCSR11_ENET_MICRST (0x1 << 5)
+ /* Reset Micrel PHY */
+ clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
+ setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
}
+
iounmap(bcsr_regs);
}
+
+ if (machine_is(p1021_mds)) {
+#define MPC85xx_PMUXCR_OFFSET 0x60
+#define MPC85xx_PMUXCR_QE0 0x00008000
+#define MPC85xx_PMUXCR_QE3 0x00001000
+#define MPC85xx_PMUXCR_QE9 0x00000040
+#define MPC85xx_PMUXCR_QE12 0x00000008
+ static __be32 __iomem *pmuxcr;
+
+ np = of_find_node_by_name(NULL, "global-utilities");
+
+ if (np) {
+ pmuxcr = of_iomap(np, 0) + MPC85xx_PMUXCR_OFFSET;
+
+ if (!pmuxcr)
+ printk(KERN_EMERG "Error: Alternate function"
+ " signal multiplex control register not"
+ " mapped!\n");
+ else
+ /* P1021 has pins muxed for QE and other functions. To
+ * enable QE UEC mode, we need to set bit QE0 for UCC1
+ * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
+ * and QE12 for QE MII management singals in PMUXCR
+ * register.
+ */
+ setbits32(pmuxcr, MPC85xx_PMUXCR_QE0 |
+ MPC85xx_PMUXCR_QE3 |
+ MPC85xx_PMUXCR_QE9 |
+ MPC85xx_PMUXCR_QE12);
+
+ of_node_put(np);
+ }
+
+ }
#endif /* CONFIG_QUICC_ENGINE */
#ifdef CONFIG_SWIOTLB
- if (lmb_end_of_DRAM() > max) {
+ if (memblock_end_of_DRAM() > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
@@ -330,6 +378,16 @@
{},
};
+static struct of_device_id p1021_ids[] = {
+ { .type = "soc", },
+ { .compatible = "soc", },
+ { .compatible = "simple-bus", },
+ { .type = "qe", },
+ { .compatible = "fsl,qe", },
+ { .compatible = "gianfar", },
+ {},
+};
+
static int __init mpc85xx_publish_devices(void)
{
if (machine_is(mpc8568_mds))
@@ -342,11 +400,22 @@
return 0;
}
+
+static int __init p1021_publish_devices(void)
+{
+ /* Publish the QE devices */
+ of_platform_bus_probe(NULL, p1021_ids, NULL);
+
+ return 0;
+}
+
machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
+machine_device_initcall(p1021_mds, p1021_publish_devices);
machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
+machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier);
static void __init mpc85xx_mds_pic_init(void)
{
@@ -366,7 +435,7 @@
mpic = mpic_alloc(np, r.start,
MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
- MPIC_BROKEN_FRR_NIRQS,
+ MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
of_node_put(np);
@@ -380,7 +449,11 @@
if (!np)
return;
}
- qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
+ if (machine_is(p1021_mds))
+ qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
+ qe_ic_cascade_high_mpic);
+ else
+ qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
of_node_put(np);
#endif /* CONFIG_QUICC_ENGINE */
}
@@ -426,3 +499,26 @@
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
};
+
+static int __init p1021_mds_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,P1021MDS");
+
+}
+
+define_machine(p1021_mds) {
+ .name = "P1021 MDS",
+ .probe = p1021_mds_probe,
+ .setup_arch = mpc85xx_mds_setup_arch,
+ .init_IRQ = mpc85xx_mds_pic_init,
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+};
+
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 2aa69a6..b11c353 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -19,7 +19,7 @@
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/system.h>
#include <asm/time.h>
@@ -103,7 +103,7 @@
#endif
#ifdef CONFIG_SWIOTLB
- if (lmb_end_of_DRAM() > max) {
+ if (memblock_end_of_DRAM() > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 22667a0..3712900 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -29,7 +29,7 @@
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/prom.h>
#include <asm/iommu.h>
@@ -845,10 +845,10 @@
/* If we found a DMA window, we check if it's big enough to enclose
* all of physical memory. If not, we force enable IOMMU
*/
- if (np && size < lmb_end_of_DRAM()) {
+ if (np && size < memblock_end_of_DRAM()) {
printk(KERN_WARNING "iommu: force-enabled, dma window"
" (%ldMB) smaller than total memory (%lldMB)\n",
- size >> 20, lmb_end_of_DRAM() >> 20);
+ size >> 20, memblock_end_of_DRAM() >> 20);
return -ENODEV;
}
@@ -1064,9 +1064,9 @@
}
fbase = _ALIGN_UP(fbase, 1 << IO_SEGMENT_SHIFT);
- fsize = lmb_phys_mem_size();
+ fsize = memblock_phys_mem_size();
- if ((fbase + fsize) <= 0x800000000)
+ if ((fbase + fsize) <= 0x800000000ul)
hbase = 0; /* use the device tree window */
else {
/* If we're over 32 GB we need to cheat. We can't map all of
@@ -1169,7 +1169,7 @@
* Note: should we make sure we have the IOMMU actually disabled ?
*/
if (iommu_is_off ||
- (!iommu_force_on && lmb_end_of_DRAM() <= 0x80000000ull))
+ (!iommu_force_on && memblock_end_of_DRAM() <= 0x80000000ull))
if (cell_iommu_init_disabled() == 0)
goto bail;
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 5c28082..1a40da9 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -1849,8 +1849,7 @@
return ret;
}
-static int spufs_mfc_fsync(struct file *file, struct dentry *dentry,
- int datasync)
+static int spufs_mfc_fsync(struct file *file, int datasync)
{
return spufs_mfc_flush(file, NULL);
}
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index fc1b1c4..e5e5f82 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -251,7 +251,7 @@
.llseek = dcache_dir_lseek,
.read = generic_read_dir,
.readdir = dcache_readdir,
- .fsync = simple_sync_file,
+ .fsync = noop_fsync,
};
EXPORT_SYMBOL_GPL(spufs_context_fops);
diff --git a/arch/powerpc/platforms/embedded6xx/wii.c b/arch/powerpc/platforms/embedded6xx/wii.c
index 174a04a..5cdcc7c 100644
--- a/arch/powerpc/platforms/embedded6xx/wii.c
+++ b/arch/powerpc/platforms/embedded6xx/wii.c
@@ -20,7 +20,7 @@
#include <linux/seq_file.h>
#include <linux/kexec.h>
#include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <mm/mmu_decl.h>
#include <asm/io.h>
@@ -65,7 +65,7 @@
void __init wii_memory_fixups(void)
{
- struct lmb_property *p = lmb.memory.region;
+ struct memblock_property *p = memblock.memory.region;
/*
* This is part of a workaround to allow the use of two
@@ -77,7 +77,7 @@
* between both ranges.
*/
- BUG_ON(lmb.memory.cnt != 2);
+ BUG_ON(memblock.memory.cnt != 2);
BUG_ON(!page_aligned(p[0].base) || !page_aligned(p[1].base));
p[0].size = _ALIGN_DOWN(p[0].size, PAGE_SIZE);
@@ -92,11 +92,11 @@
p[0].size += wii_hole_size + p[1].size;
- lmb.memory.cnt = 1;
- lmb_analyze();
+ memblock.memory.cnt = 1;
+ memblock_analyze();
/* reserve the hole */
- lmb_reserve(wii_hole_start, wii_hole_size);
+ memblock_reserve(wii_hole_start, wii_hole_size);
/* allow ioremapping the address space in the hole */
__allow_ioremap_reserved = 1;
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index 3fc2e64..ab3962b 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -445,7 +445,11 @@
}
allocate_device_bars(pdev);
- iseries_device_information(pdev, bus, *sub_bus);
+ if (likely(sub_bus))
+ iseries_device_information(pdev, bus, *sub_bus);
+ else
+ printk(KERN_ERR "PCI: Device node %s has missing or invalid "
+ "linux,subbus property\n", node->full_name);
}
/*
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 39df705..3fff8d9 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -41,7 +41,7 @@
#include <linux/smp.h>
#include <linux/bitops.h>
#include <linux/of_device.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/processor.h>
#include <asm/sections.h>
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 7b1d608..1f9fb2c 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -204,7 +204,7 @@
pr_debug(" -> %s\n", __func__);
/* Allocate a spare page to map all invalid IOTLB pages. */
- tmp = lmb_alloc(IOBMAP_PAGE_SIZE, IOBMAP_PAGE_SIZE);
+ tmp = memblock_alloc(IOBMAP_PAGE_SIZE, IOBMAP_PAGE_SIZE);
if (!tmp)
panic("IOBMAP: Cannot allocate spare page!");
/* Empty l1 is marked invalid */
@@ -275,7 +275,7 @@
return;
#endif
/* For 2G space, 8x64 pages (2^21 bytes) is max total l2 size */
- iob_l2_base = (u32 *)abs_to_virt(lmb_alloc_base(1UL<<21, 1UL<<21, 0x80000000));
+ iob_l2_base = (u32 *)abs_to_virt(memblock_alloc_base(1UL<<21, 1UL<<21, 0x80000000));
printk(KERN_INFO "IOBMAP L2 allocated at: %p\n", iob_l2_base);
}
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index f1d0132..9deb274 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -51,7 +51,7 @@
#include <linux/suspend.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/reg.h>
#include <asm/sections.h>
@@ -619,7 +619,7 @@
* driver needs that. We have to allocate it now. We allocate 4k
* (1 small page) for now.
*/
- smu_cmdbuf_abs = lmb_alloc_base(4096, 4096, 0x80000000UL);
+ smu_cmdbuf_abs = memblock_alloc_base(4096, 4096, 0x80000000UL);
#endif /* CONFIG_PMAC_SMU */
return 1;
diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c
index 1e8a1e3..2c0ed87 100644
--- a/arch/powerpc/platforms/ps3/htab.c
+++ b/arch/powerpc/platforms/ps3/htab.c
@@ -19,7 +19,7 @@
*/
#include <linux/kernel.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/machdep.h>
#include <asm/prom.h>
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 7925751..c204588 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -21,7 +21,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/memory_hotplug.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <linux/slab.h>
#include <asm/cell-regs.h>
@@ -318,8 +318,8 @@
return result;
}
- lmb_add(start_addr, map.r1.size);
- lmb_analyze();
+ memblock_add(start_addr, map.r1.size);
+ memblock_analyze();
result = online_pages(start_pfn, nr_pages);
diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c
index dd521a1..5b759b6 100644
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -24,7 +24,7 @@
#include <linux/fs.h>
#include <linux/syscalls.h>
#include <linux/ctype.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <linux/of.h>
#include <linux/slab.h>
@@ -723,7 +723,7 @@
* flash to a high address in the boot memory region and then puts that RAM
* address and the byte count into the repository for retrieval by the guest.
* We copy the data we want into a static variable and allow the memory setup
- * by the HV to be claimed by the lmb manager.
+ * by the HV to be claimed by the memblock manager.
*
* The os area mirror will not be available to a second stage kernel, and
* the header verify will fail. In this case, the saved_params values will
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 01e7b5b..deab5f9 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -10,14 +10,14 @@
*/
#include <linux/of.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <linux/vmalloc.h>
#include <asm/firmware.h>
#include <asm/machdep.h>
#include <asm/pSeries_reconfig.h>
#include <asm/sparsemem.h>
-static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size)
+static int pseries_remove_memblock(unsigned long base, unsigned int memblock_size)
{
unsigned long start, start_pfn;
struct zone *zone;
@@ -26,7 +26,7 @@
start_pfn = base >> PAGE_SHIFT;
if (!pfn_valid(start_pfn)) {
- lmb_remove(base, lmb_size);
+ memblock_remove(base, memblock_size);
return 0;
}
@@ -41,20 +41,20 @@
* to sysfs "state" file and we can't remove sysfs entries
* while writing to it. So we have to defer it to here.
*/
- ret = __remove_pages(zone, start_pfn, lmb_size >> PAGE_SHIFT);
+ ret = __remove_pages(zone, start_pfn, memblock_size >> PAGE_SHIFT);
if (ret)
return ret;
/*
* Update memory regions for memory remove
*/
- lmb_remove(base, lmb_size);
+ memblock_remove(base, memblock_size);
/*
* Remove htab bolted mappings for this section of memory
*/
start = (unsigned long)__va(base);
- ret = remove_section_mapping(start, start + lmb_size);
+ ret = remove_section_mapping(start, start + memblock_size);
/* Ensure all vmalloc mappings are flushed in case they also
* hit that section of memory
@@ -69,7 +69,7 @@
const char *type;
const unsigned int *regs;
unsigned long base;
- unsigned int lmb_size;
+ unsigned int memblock_size;
int ret = -EINVAL;
/*
@@ -80,16 +80,16 @@
return 0;
/*
- * Find the bae address and size of the lmb
+ * Find the bae address and size of the memblock
*/
regs = of_get_property(np, "reg", NULL);
if (!regs)
return ret;
base = *(unsigned long *)regs;
- lmb_size = regs[3];
+ memblock_size = regs[3];
- ret = pseries_remove_lmb(base, lmb_size);
+ ret = pseries_remove_memblock(base, memblock_size);
return ret;
}
@@ -98,7 +98,7 @@
const char *type;
const unsigned int *regs;
unsigned long base;
- unsigned int lmb_size;
+ unsigned int memblock_size;
int ret = -EINVAL;
/*
@@ -109,43 +109,43 @@
return 0;
/*
- * Find the base and size of the lmb
+ * Find the base and size of the memblock
*/
regs = of_get_property(np, "reg", NULL);
if (!regs)
return ret;
base = *(unsigned long *)regs;
- lmb_size = regs[3];
+ memblock_size = regs[3];
/*
* Update memory region to represent the memory add
*/
- ret = lmb_add(base, lmb_size);
+ ret = memblock_add(base, memblock_size);
return (ret < 0) ? -EINVAL : 0;
}
static int pseries_drconf_memory(unsigned long *base, unsigned int action)
{
struct device_node *np;
- const unsigned long *lmb_size;
+ const unsigned long *memblock_size;
int rc;
np = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
if (!np)
return -EINVAL;
- lmb_size = of_get_property(np, "ibm,lmb-size", NULL);
- if (!lmb_size) {
+ memblock_size = of_get_property(np, "ibm,memblock-size", NULL);
+ if (!memblock_size) {
of_node_put(np);
return -EINVAL;
}
if (action == PSERIES_DRCONF_MEM_ADD) {
- rc = lmb_add(*base, *lmb_size);
+ rc = memblock_add(*base, *memblock_size);
rc = (rc < 0) ? -EINVAL : 0;
} else if (action == PSERIES_DRCONF_MEM_REMOVE) {
- rc = pseries_remove_lmb(*base, *lmb_size);
+ rc = pseries_remove_memblock(*base, *memblock_size);
} else {
rc = -EINVAL;
}
diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c
index 1fefae7..e19ff02 100644
--- a/arch/powerpc/platforms/pseries/hvCall_inst.c
+++ b/arch/powerpc/platforms/pseries/hvCall_inst.c
@@ -102,7 +102,7 @@
#define CPU_NAME_BUF_SIZE 32
-static void probe_hcall_entry(unsigned long opcode, unsigned long *args)
+static void probe_hcall_entry(void *ignored, unsigned long opcode, unsigned long *args)
{
struct hcall_stats *h;
@@ -114,7 +114,7 @@
h->purr_start = mfspr(SPRN_PURR);
}
-static void probe_hcall_exit(unsigned long opcode, unsigned long retval,
+static void probe_hcall_exit(void *ignored, unsigned long opcode, unsigned long retval,
unsigned long *retbuf)
{
struct hcall_stats *h;
@@ -140,11 +140,11 @@
if (!firmware_has_feature(FW_FEATURE_LPAR))
return 0;
- if (register_trace_hcall_entry(probe_hcall_entry))
+ if (register_trace_hcall_entry(probe_hcall_entry, NULL))
return -EINVAL;
- if (register_trace_hcall_exit(probe_hcall_exit)) {
- unregister_trace_hcall_entry(probe_hcall_entry);
+ if (register_trace_hcall_exit(probe_hcall_exit, NULL)) {
+ unregister_trace_hcall_entry(probe_hcall_entry, NULL);
return -EINVAL;
}
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index d26182d..395848e 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -66,7 +66,7 @@
tcep = ((u64 *)tbl->it_base) + index;
while (npages--) {
- /* can't move this out since we might cross LMB boundary */
+ /* can't move this out since we might cross MEMBLOCK boundary */
rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
*tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
diff --git a/arch/powerpc/platforms/pseries/phyp_dump.c b/arch/powerpc/platforms/pseries/phyp_dump.c
index 7ebd9e8..6e7742d 100644
--- a/arch/powerpc/platforms/pseries/phyp_dump.c
+++ b/arch/powerpc/platforms/pseries/phyp_dump.c
@@ -255,12 +255,12 @@
/* ------------------------------------------------- */
/**
- * release_memory_range -- release memory previously lmb_reserved
+ * release_memory_range -- release memory previously memblock_reserved
* @start_pfn: starting physical frame number
* @nr_pages: number of pages to free.
*
* This routine will release memory that had been previously
- * lmb_reserved in early boot. The released memory becomes
+ * memblock_reserved in early boot. The released memory becomes
* available for genreal use.
*/
static void release_memory_range(unsigned long start_pfn,
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index c8b96ed..559db2b 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -36,7 +36,7 @@
#include <linux/dma-mapping.h>
#include <linux/vmalloc.h>
#include <linux/suspend.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <linux/gfp.h>
#include <asm/io.h>
#include <asm/prom.h>
@@ -232,7 +232,7 @@
* that to work around what looks like a problem with the HT bridge
* prefetching into invalid pages and corrupting data
*/
- tmp = lmb_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
+ tmp = memblock_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) &
DARTMAP_RPNMASK);
@@ -407,7 +407,7 @@
if (iommu_is_off)
return;
- if (!iommu_force_on && lmb_end_of_DRAM() <= 0x40000000ull)
+ if (!iommu_force_on && memblock_end_of_DRAM() <= 0x40000000ull)
return;
/* 512 pages (2MB) is max DART tablesize. */
@@ -416,7 +416,7 @@
* will blow up an entire large page anyway in the kernel mapping
*/
dart_tablebase = (unsigned long)
- abs_to_virt(lmb_alloc_base(1UL<<24, 1UL<<24, 0x80000000L));
+ abs_to_virt(memblock_alloc_base(1UL<<24, 1UL<<24, 0x80000000L));
printk(KERN_INFO "DART table allocated at: %lx\n", dart_tablebase);
}
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index a7be144..962c2d8 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2007-2008 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (C) 2007-2010 Freescale Semiconductor, Inc.
*
* Author: Tony Li <tony.li@freescale.com>
* Jason Jin <Jason.jin@freescale.com>
@@ -22,14 +22,20 @@
#include <asm/prom.h>
#include <asm/hw_irq.h>
#include <asm/ppc-pci.h>
+#include <asm/mpic.h>
#include "fsl_msi.h"
+LIST_HEAD(msi_head);
+
struct fsl_msi_feature {
u32 fsl_pic_ip;
u32 msiir_offset;
};
-static struct fsl_msi *fsl_msi;
+struct fsl_msi_cascade_data {
+ struct fsl_msi *msi_data;
+ int index;
+};
static inline u32 fsl_msi_read(u32 __iomem *base, unsigned int reg)
{
@@ -54,10 +60,12 @@
static int fsl_msi_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
+ struct fsl_msi *msi_data = h->host_data;
struct irq_chip *chip = &fsl_msi_chip;
irq_to_desc(virq)->status |= IRQ_TYPE_EDGE_FALLING;
+ set_irq_chip_data(virq, msi_data);
set_irq_chip_and_handler(virq, chip, handle_edge_irq);
return 0;
@@ -96,11 +104,12 @@
static void fsl_teardown_msi_irqs(struct pci_dev *pdev)
{
struct msi_desc *entry;
- struct fsl_msi *msi_data = fsl_msi;
+ struct fsl_msi *msi_data;
list_for_each_entry(entry, &pdev->msi_list, list) {
if (entry->irq == NO_IRQ)
continue;
+ msi_data = get_irq_data(entry->irq);
set_irq_msi(entry->irq, NULL);
msi_bitmap_free_hwirqs(&msi_data->bitmap,
virq_to_hw(entry->irq), 1);
@@ -111,9 +120,10 @@
}
static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
- struct msi_msg *msg)
+ struct msi_msg *msg,
+ struct fsl_msi *fsl_msi_data)
{
- struct fsl_msi *msi_data = fsl_msi;
+ struct fsl_msi *msi_data = fsl_msi_data;
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
u32 base = 0;
@@ -130,14 +140,19 @@
static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
{
- int rc, hwirq;
+ int rc, hwirq = -ENOMEM;
unsigned int virq;
struct msi_desc *entry;
struct msi_msg msg;
- struct fsl_msi *msi_data = fsl_msi;
+ struct fsl_msi *msi_data;
list_for_each_entry(entry, &pdev->msi_list, list) {
- hwirq = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
+ list_for_each_entry(msi_data, &msi_head, list) {
+ hwirq = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
+ if (hwirq >= 0)
+ break;
+ }
+
if (hwirq < 0) {
rc = hwirq;
pr_debug("%s: fail allocating msi interrupt\n",
@@ -154,25 +169,31 @@
rc = -ENOSPC;
goto out_free;
}
+ set_irq_data(virq, msi_data);
set_irq_msi(virq, entry);
- fsl_compose_msi_msg(pdev, hwirq, &msg);
+ fsl_compose_msi_msg(pdev, hwirq, &msg, msi_data);
write_msi_msg(virq, &msg);
}
return 0;
out_free:
+ /* free by the caller of this function */
return rc;
}
static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
{
unsigned int cascade_irq;
- struct fsl_msi *msi_data = fsl_msi;
+ struct fsl_msi *msi_data;
int msir_index = -1;
u32 msir_value = 0;
u32 intr_index;
u32 have_shift = 0;
+ struct fsl_msi_cascade_data *cascade_data;
+
+ cascade_data = (struct fsl_msi_cascade_data *)get_irq_data(irq);
+ msi_data = cascade_data->msi_data;
raw_spin_lock(&desc->lock);
if ((msi_data->feature & FSL_PIC_IP_MASK) == FSL_PIC_IP_IPIC) {
@@ -187,13 +208,13 @@
if (unlikely(desc->status & IRQ_INPROGRESS))
goto unlock;
- msir_index = (int)desc->handler_data;
+ msir_index = cascade_data->index;
if (msir_index >= NR_MSI_REG)
cascade_irq = NO_IRQ;
desc->status |= IRQ_INPROGRESS;
- switch (fsl_msi->feature & FSL_PIC_IP_MASK) {
+ switch (msi_data->feature & FSL_PIC_IP_MASK) {
case FSL_PIC_IP_MPIC:
msir_value = fsl_msi_read(msi_data->msi_regs,
msir_index * 0x10);
@@ -229,6 +250,30 @@
raw_spin_unlock(&desc->lock);
}
+static int fsl_of_msi_remove(struct of_device *ofdev)
+{
+ struct fsl_msi *msi = ofdev->dev.platform_data;
+ int virq, i;
+ struct fsl_msi_cascade_data *cascade_data;
+
+ if (msi->list.prev != NULL)
+ list_del(&msi->list);
+ for (i = 0; i < NR_MSI_REG; i++) {
+ virq = msi->msi_virqs[i];
+ if (virq != NO_IRQ) {
+ cascade_data = get_irq_data(virq);
+ kfree(cascade_data);
+ irq_dispose_mapping(virq);
+ }
+ }
+ if (msi->bitmap.bitmap)
+ msi_bitmap_free(&msi->bitmap);
+ iounmap(msi->msi_regs);
+ kfree(msi);
+
+ return 0;
+}
+
static int __devinit fsl_of_msi_probe(struct of_device *dev,
const struct of_device_id *match)
{
@@ -239,15 +284,18 @@
int virt_msir;
const u32 *p;
struct fsl_msi_feature *features = match->data;
+ struct fsl_msi_cascade_data *cascade_data = NULL;
+ int len;
+ u32 offset;
printk(KERN_DEBUG "Setting up Freescale MSI support\n");
msi = kzalloc(sizeof(struct fsl_msi), GFP_KERNEL);
if (!msi) {
dev_err(&dev->dev, "No memory for MSI structure\n");
- err = -ENOMEM;
- goto error_out;
+ return -ENOMEM;
}
+ dev->dev.platform_data = msi;
msi->irqhost = irq_alloc_host(dev->dev.of_node, IRQ_HOST_MAP_LINEAR,
NR_MSI_IRQS, &fsl_msi_host_ops, 0);
@@ -298,27 +346,47 @@
err = -EINVAL;
goto error_out;
}
+ offset = 0;
+ p = of_get_property(dev->dev.of_node, "msi-available-ranges", &len);
+ if (p)
+ offset = *p / IRQS_PER_MSI_REG;
count /= sizeof(u32);
- for (i = 0; i < count / 2; i++) {
- if (i > NR_MSI_REG)
- break;
+ for (i = 0; i < min(count / 2, NR_MSI_REG); i++) {
virt_msir = irq_of_parse_and_map(dev->dev.of_node, i);
if (virt_msir != NO_IRQ) {
- set_irq_data(virt_msir, (void *)i);
+ cascade_data = kzalloc(
+ sizeof(struct fsl_msi_cascade_data),
+ GFP_KERNEL);
+ if (!cascade_data) {
+ dev_err(&dev->dev,
+ "No memory for MSI cascade data\n");
+ err = -ENOMEM;
+ goto error_out;
+ }
+ msi->msi_virqs[i] = virt_msir;
+ cascade_data->index = i + offset;
+ cascade_data->msi_data = msi;
+ set_irq_data(virt_msir, (void *)cascade_data);
set_irq_chained_handler(virt_msir, fsl_msi_cascade);
}
}
- fsl_msi = msi;
+ list_add_tail(&msi->list, &msi_head);
- WARN_ON(ppc_md.setup_msi_irqs);
- ppc_md.setup_msi_irqs = fsl_setup_msi_irqs;
- ppc_md.teardown_msi_irqs = fsl_teardown_msi_irqs;
- ppc_md.msi_check_device = fsl_msi_check_device;
+ /* The multiple setting ppc_md.setup_msi_irqs will not harm things */
+ if (!ppc_md.setup_msi_irqs) {
+ ppc_md.setup_msi_irqs = fsl_setup_msi_irqs;
+ ppc_md.teardown_msi_irqs = fsl_teardown_msi_irqs;
+ ppc_md.msi_check_device = fsl_msi_check_device;
+ } else if (ppc_md.setup_msi_irqs != fsl_setup_msi_irqs) {
+ dev_err(&dev->dev, "Different MSI driver already installed!\n");
+ err = -ENODEV;
+ goto error_out;
+ }
return 0;
error_out:
- kfree(msi);
+ fsl_of_msi_remove(dev);
return err;
}
@@ -351,6 +419,7 @@
.of_match_table = fsl_of_msi_ids,
},
.probe = fsl_of_msi_probe,
+ .remove = fsl_of_msi_remove,
};
static __init int fsl_of_msi_init(void)
diff --git a/arch/powerpc/sysdev/fsl_msi.h b/arch/powerpc/sysdev/fsl_msi.h
index 331c7e7..624580c 100644
--- a/arch/powerpc/sysdev/fsl_msi.h
+++ b/arch/powerpc/sysdev/fsl_msi.h
@@ -32,8 +32,11 @@
u32 msi_addr_hi;
void __iomem *msi_regs;
u32 feature;
+ int msi_virqs[NR_MSI_REG];
struct msi_bitmap bitmap;
+
+ struct list_head list; /* support multiple MSI banks */
};
#endif /* _POWERPC_SYSDEV_FSL_MSI_H */
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index a14760f..356c6a0 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -23,7 +23,7 @@
#include <linux/string.h>
#include <linux/init.h>
#include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <linux/log2.h>
#include <linux/slab.h>
@@ -190,7 +190,7 @@
pr_info("%s: PCICSRBAR @ 0x%x\n", name, pcicsrbar);
/* Setup inbound mem window */
- mem = lmb_end_of_DRAM();
+ mem = memblock_end_of_DRAM();
sz = min(mem, paddr_lo);
mem_log = __ilog2_u64(sz);
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 6a1fde0..30e1626 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1,6 +1,15 @@
/*
* Freescale MPC85xx/MPC86xx RapidIO support
*
+ * Copyright 2009 Sysgo AG
+ * Thomas Moll <thomas.moll@sysgo.com>
+ * - fixed maintenance access routines, check for aligned access
+ *
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ * - Added Port-Write message handling
+ * - Added Machine Check exception handling
+ *
* Copyright (C) 2007, 2008 Freescale Semiconductor, Inc.
* Zhang Wei <wei.zhang@freescale.com>
*
@@ -24,19 +33,30 @@
#include <linux/of_platform.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/kfifo.h>
#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/uaccess.h>
+
+#undef DEBUG_PW /* Port-Write debugging */
/* RapidIO definition irq, which read from OF-tree */
#define IRQ_RIO_BELL(m) (((struct rio_priv *)(m->priv))->bellirq)
#define IRQ_RIO_TX(m) (((struct rio_priv *)(m->priv))->txirq)
#define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq)
+#define IRQ_RIO_PW(m) (((struct rio_priv *)(m->priv))->pwirq)
#define RIO_ATMU_REGS_OFFSET 0x10c00
#define RIO_P_MSG_REGS_OFFSET 0x11000
#define RIO_S_MSG_REGS_OFFSET 0x13000
#define RIO_ESCSR 0x158
#define RIO_CCSR 0x15c
+#define RIO_LTLEDCSR 0x0608
+#define RIO_LTLEDCSR_IER 0x80000000
+#define RIO_LTLEDCSR_PRT 0x01000000
+#define RIO_LTLEECSR 0x060c
+#define RIO_EPWISR 0x10010
#define RIO_ISR_AACR 0x10120
#define RIO_ISR_AACR_AA 0x1 /* Accept All ID */
#define RIO_MAINT_WIN_SIZE 0x400000
@@ -55,6 +75,18 @@
#define RIO_MSG_ISR_QFI 0x00000010
#define RIO_MSG_ISR_DIQI 0x00000001
+#define RIO_IPWMR_SEN 0x00100000
+#define RIO_IPWMR_QFIE 0x00000100
+#define RIO_IPWMR_EIE 0x00000020
+#define RIO_IPWMR_CQ 0x00000002
+#define RIO_IPWMR_PWE 0x00000001
+
+#define RIO_IPWSR_QF 0x00100000
+#define RIO_IPWSR_TE 0x00000080
+#define RIO_IPWSR_QFI 0x00000010
+#define RIO_IPWSR_PWD 0x00000008
+#define RIO_IPWSR_PWB 0x00000004
+
#define RIO_MSG_DESC_SIZE 32
#define RIO_MSG_BUFFER_SIZE 4096
#define RIO_MIN_TX_RING_SIZE 2
@@ -121,7 +153,7 @@
u32 pad10[26];
u32 pwmr;
u32 pwsr;
- u32 pad11;
+ u32 epwqbar;
u32 pwqbar;
};
@@ -160,6 +192,14 @@
void *dev_id;
};
+struct rio_port_write_msg {
+ void *virt;
+ dma_addr_t phys;
+ u32 msg_count;
+ u32 err_count;
+ u32 discard_count;
+};
+
struct rio_priv {
struct device *dev;
void __iomem *regs_win;
@@ -172,11 +212,64 @@
struct rio_dbell_ring dbell_ring;
struct rio_msg_tx_ring msg_tx_ring;
struct rio_msg_rx_ring msg_rx_ring;
+ struct rio_port_write_msg port_write_msg;
int bellirq;
int txirq;
int rxirq;
+ int pwirq;
+ struct work_struct pw_work;
+ struct kfifo pw_fifo;
+ spinlock_t pw_fifo_lock;
};
+#define __fsl_read_rio_config(x, addr, err, op) \
+ __asm__ __volatile__( \
+ "1: "op" %1,0(%2)\n" \
+ " eieio\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: li %1,-1\n" \
+ " li %0,%3\n" \
+ " b 2b\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,3b\n" \
+ ".text" \
+ : "=r" (err), "=r" (x) \
+ : "b" (addr), "i" (-EFAULT), "0" (err))
+
+static void __iomem *rio_regs_win;
+
+static int (*saved_mcheck_exception)(struct pt_regs *regs);
+
+static int fsl_rio_mcheck_exception(struct pt_regs *regs)
+{
+ const struct exception_table_entry *entry = NULL;
+ unsigned long reason = (mfspr(SPRN_MCSR) & MCSR_MASK);
+
+ if (reason & MCSR_BUS_RBERR) {
+ reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR));
+ if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) {
+ /* Check if we are prepared to handle this fault */
+ entry = search_exception_tables(regs->nip);
+ if (entry) {
+ pr_debug("RIO: %s - MC Exception handled\n",
+ __func__);
+ out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR),
+ 0);
+ regs->msr |= MSR_RI;
+ regs->nip = entry->fixup;
+ return 1;
+ }
+ }
+ }
+
+ if (saved_mcheck_exception)
+ return saved_mcheck_exception(regs);
+ else
+ return cur_cpu_spec->machine_check(regs);
+}
+
/**
* fsl_rio_doorbell_send - Send a MPC85xx doorbell message
* @mport: RapidIO master port info
@@ -277,27 +370,44 @@
{
struct rio_priv *priv = mport->priv;
u8 *data;
+ u32 rval, err = 0;
pr_debug
("fsl_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
index, destid, hopcount, offset, len);
- out_be32(&priv->maint_atmu_regs->rowtar,
- (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
- data = (u8 *) priv->maint_win + offset;
+ /* 16MB maintenance window possible */
+ /* allow only aligned access to maintenance registers */
+ if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len))
+ return -EINVAL;
+
+ out_be32(&priv->maint_atmu_regs->rowtar,
+ (destid << 22) | (hopcount << 12) | (offset >> 12));
+ out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
+
+ data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
switch (len) {
case 1:
- *val = in_8((u8 *) data);
+ __fsl_read_rio_config(rval, data, err, "lbz");
break;
case 2:
- *val = in_be16((u16 *) data);
+ __fsl_read_rio_config(rval, data, err, "lhz");
+ break;
+ case 4:
+ __fsl_read_rio_config(rval, data, err, "lwz");
break;
default:
- *val = in_be32((u32 *) data);
- break;
+ return -EINVAL;
}
- return 0;
+ if (err) {
+ pr_debug("RIO: cfg_read error %d for %x:%x:%x\n",
+ err, destid, hopcount, offset);
+ }
+
+ *val = rval;
+
+ return err;
}
/**
@@ -322,10 +432,17 @@
pr_debug
("fsl_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
index, destid, hopcount, offset, len, val);
- out_be32(&priv->maint_atmu_regs->rowtar,
- (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
- data = (u8 *) priv->maint_win + offset;
+ /* 16MB maintenance windows possible */
+ /* allow only aligned access to maintenance registers */
+ if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len))
+ return -EINVAL;
+
+ out_be32(&priv->maint_atmu_regs->rowtar,
+ (destid << 22) | (hopcount << 12) | (offset >> 12));
+ out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
+
+ data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
switch (len) {
case 1:
out_8((u8 *) data, val);
@@ -333,9 +450,11 @@
case 2:
out_be16((u16 *) data, val);
break;
- default:
+ case 4:
out_be32((u32 *) data, val);
break;
+ default:
+ return -EINVAL;
}
return 0;
@@ -930,6 +1049,223 @@
return rc;
}
+/**
+ * fsl_rio_port_write_handler - MPC85xx port write interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles port write interrupts. Parses a list of registered
+ * port write event handlers and executes a matching event handler.
+ */
+static irqreturn_t
+fsl_rio_port_write_handler(int irq, void *dev_instance)
+{
+ u32 ipwmr, ipwsr;
+ struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct rio_priv *priv = port->priv;
+ u32 epwisr, tmp;
+
+ ipwmr = in_be32(&priv->msg_regs->pwmr);
+ ipwsr = in_be32(&priv->msg_regs->pwsr);
+
+ epwisr = in_be32(priv->regs_win + RIO_EPWISR);
+ if (epwisr & 0x80000000) {
+ tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
+ pr_info("RIO_LTLEDCSR = 0x%x\n", tmp);
+ out_be32(priv->regs_win + RIO_LTLEDCSR, 0);
+ }
+
+ if (!(epwisr & 0x00000001))
+ return IRQ_HANDLED;
+
+#ifdef DEBUG_PW
+ pr_debug("PW Int->IPWMR: 0x%08x IPWSR: 0x%08x (", ipwmr, ipwsr);
+ if (ipwsr & RIO_IPWSR_QF)
+ pr_debug(" QF");
+ if (ipwsr & RIO_IPWSR_TE)
+ pr_debug(" TE");
+ if (ipwsr & RIO_IPWSR_QFI)
+ pr_debug(" QFI");
+ if (ipwsr & RIO_IPWSR_PWD)
+ pr_debug(" PWD");
+ if (ipwsr & RIO_IPWSR_PWB)
+ pr_debug(" PWB");
+ pr_debug(" )\n");
+#endif
+ out_be32(&priv->msg_regs->pwsr,
+ ipwsr & (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD));
+
+ if ((ipwmr & RIO_IPWMR_EIE) && (ipwsr & RIO_IPWSR_TE)) {
+ priv->port_write_msg.err_count++;
+ pr_info("RIO: Port-Write Transaction Err (%d)\n",
+ priv->port_write_msg.err_count);
+ }
+ if (ipwsr & RIO_IPWSR_PWD) {
+ priv->port_write_msg.discard_count++;
+ pr_info("RIO: Port Discarded Port-Write Msg(s) (%d)\n",
+ priv->port_write_msg.discard_count);
+ }
+
+ /* Schedule deferred processing if PW was received */
+ if (ipwsr & RIO_IPWSR_QFI) {
+ /* Save PW message (if there is room in FIFO),
+ * otherwise discard it.
+ */
+ if (kfifo_avail(&priv->pw_fifo) >= RIO_PW_MSG_SIZE) {
+ priv->port_write_msg.msg_count++;
+ kfifo_in(&priv->pw_fifo, priv->port_write_msg.virt,
+ RIO_PW_MSG_SIZE);
+ } else {
+ priv->port_write_msg.discard_count++;
+ pr_info("RIO: ISR Discarded Port-Write Msg(s) (%d)\n",
+ priv->port_write_msg.discard_count);
+ }
+ schedule_work(&priv->pw_work);
+ }
+
+ /* Issue Clear Queue command. This allows another
+ * port-write to be received.
+ */
+ out_be32(&priv->msg_regs->pwmr, ipwmr | RIO_IPWMR_CQ);
+
+ return IRQ_HANDLED;
+}
+
+static void fsl_pw_dpc(struct work_struct *work)
+{
+ struct rio_priv *priv = container_of(work, struct rio_priv, pw_work);
+ unsigned long flags;
+ u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)];
+
+ /*
+ * Process port-write messages
+ */
+ spin_lock_irqsave(&priv->pw_fifo_lock, flags);
+ while (kfifo_out(&priv->pw_fifo, (unsigned char *)msg_buffer,
+ RIO_PW_MSG_SIZE)) {
+ /* Process one message */
+ spin_unlock_irqrestore(&priv->pw_fifo_lock, flags);
+#ifdef DEBUG_PW
+ {
+ u32 i;
+ pr_debug("%s : Port-Write Message:", __func__);
+ for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); i++) {
+ if ((i%4) == 0)
+ pr_debug("\n0x%02x: 0x%08x", i*4,
+ msg_buffer[i]);
+ else
+ pr_debug(" 0x%08x", msg_buffer[i]);
+ }
+ pr_debug("\n");
+ }
+#endif
+ /* Pass the port-write message to RIO core for processing */
+ rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer);
+ spin_lock_irqsave(&priv->pw_fifo_lock, flags);
+ }
+ spin_unlock_irqrestore(&priv->pw_fifo_lock, flags);
+}
+
+/**
+ * fsl_rio_pw_enable - enable/disable port-write interface init
+ * @mport: Master port implementing the port write unit
+ * @enable: 1=enable; 0=disable port-write message handling
+ */
+static int fsl_rio_pw_enable(struct rio_mport *mport, int enable)
+{
+ struct rio_priv *priv = mport->priv;
+ u32 rval;
+
+ rval = in_be32(&priv->msg_regs->pwmr);
+
+ if (enable)
+ rval |= RIO_IPWMR_PWE;
+ else
+ rval &= ~RIO_IPWMR_PWE;
+
+ out_be32(&priv->msg_regs->pwmr, rval);
+
+ return 0;
+}
+
+/**
+ * fsl_rio_port_write_init - MPC85xx port write interface init
+ * @mport: Master port implementing the port write unit
+ *
+ * Initializes port write unit hardware and DMA buffer
+ * ring. Called from fsl_rio_setup(). Returns %0 on success
+ * or %-ENOMEM on failure.
+ */
+static int fsl_rio_port_write_init(struct rio_mport *mport)
+{
+ struct rio_priv *priv = mport->priv;
+ int rc = 0;
+
+ /* Following configurations require a disabled port write controller */
+ out_be32(&priv->msg_regs->pwmr,
+ in_be32(&priv->msg_regs->pwmr) & ~RIO_IPWMR_PWE);
+
+ /* Initialize port write */
+ priv->port_write_msg.virt = dma_alloc_coherent(priv->dev,
+ RIO_PW_MSG_SIZE,
+ &priv->port_write_msg.phys, GFP_KERNEL);
+ if (!priv->port_write_msg.virt) {
+ pr_err("RIO: unable allocate port write queue\n");
+ return -ENOMEM;
+ }
+
+ priv->port_write_msg.err_count = 0;
+ priv->port_write_msg.discard_count = 0;
+
+ /* Point dequeue/enqueue pointers at first entry */
+ out_be32(&priv->msg_regs->epwqbar, 0);
+ out_be32(&priv->msg_regs->pwqbar, (u32) priv->port_write_msg.phys);
+
+ pr_debug("EIPWQBAR: 0x%08x IPWQBAR: 0x%08x\n",
+ in_be32(&priv->msg_regs->epwqbar),
+ in_be32(&priv->msg_regs->pwqbar));
+
+ /* Clear interrupt status IPWSR */
+ out_be32(&priv->msg_regs->pwsr,
+ (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD));
+
+ /* Configure port write contoller for snooping enable all reporting,
+ clear queue full */
+ out_be32(&priv->msg_regs->pwmr,
+ RIO_IPWMR_SEN | RIO_IPWMR_QFIE | RIO_IPWMR_EIE | RIO_IPWMR_CQ);
+
+
+ /* Hook up port-write handler */
+ rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler, 0,
+ "port-write", (void *)mport);
+ if (rc < 0) {
+ pr_err("MPC85xx RIO: unable to request inbound doorbell irq");
+ goto err_out;
+ }
+
+ INIT_WORK(&priv->pw_work, fsl_pw_dpc);
+ spin_lock_init(&priv->pw_fifo_lock);
+ if (kfifo_alloc(&priv->pw_fifo, RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
+ pr_err("FIFO allocation failed\n");
+ rc = -ENOMEM;
+ goto err_out_irq;
+ }
+
+ pr_debug("IPWMR: 0x%08x IPWSR: 0x%08x\n",
+ in_be32(&priv->msg_regs->pwmr),
+ in_be32(&priv->msg_regs->pwsr));
+
+ return rc;
+
+err_out_irq:
+ free_irq(IRQ_RIO_PW(mport), (void *)mport);
+err_out:
+ dma_free_coherent(priv->dev, RIO_PW_MSG_SIZE,
+ priv->port_write_msg.virt,
+ priv->port_write_msg.phys);
+ return rc;
+}
+
static char *cmdline = NULL;
static int fsl_rio_get_hdid(int index)
@@ -1057,7 +1393,7 @@
dev_info(&dev->dev, "LAW start 0x%016llx, size 0x%016llx.\n",
law_start, law_size);
- ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
+ ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL);
if (!ops) {
rc = -ENOMEM;
goto err_ops;
@@ -1067,6 +1403,7 @@
ops->cread = fsl_rio_config_read;
ops->cwrite = fsl_rio_config_write;
ops->dsend = fsl_rio_doorbell_send;
+ ops->pwenable = fsl_rio_pw_enable;
port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
if (!port) {
@@ -1089,11 +1426,12 @@
port->iores.flags = IORESOURCE_MEM;
port->iores.name = "rio_io_win";
+ priv->pwirq = irq_of_parse_and_map(dev->dev.of_node, 0);
priv->bellirq = irq_of_parse_and_map(dev->dev.of_node, 2);
priv->txirq = irq_of_parse_and_map(dev->dev.of_node, 3);
priv->rxirq = irq_of_parse_and_map(dev->dev.of_node, 4);
- dev_info(&dev->dev, "bellirq: %d, txirq: %d, rxirq %d\n", priv->bellirq,
- priv->txirq, priv->rxirq);
+ dev_info(&dev->dev, "pwirq: %d, bellirq: %d, txirq: %d, rxirq %d\n",
+ priv->pwirq, priv->bellirq, priv->txirq, priv->rxirq);
rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
@@ -1109,6 +1447,7 @@
rio_register_mport(port);
priv->regs_win = ioremap(regs.start, regs.end - regs.start + 1);
+ rio_regs_win = priv->regs_win;
/* Probe the master port phy type */
ccsr = in_be32(priv->regs_win + RIO_CCSR);
@@ -1166,7 +1505,8 @@
/* Configure maintenance transaction window */
out_be32(&priv->maint_atmu_regs->rowbar, law_start >> 12);
- out_be32(&priv->maint_atmu_regs->rowar, 0x80077015); /* 4M */
+ out_be32(&priv->maint_atmu_regs->rowar,
+ 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1));
priv->maint_win = ioremap(law_start, RIO_MAINT_WIN_SIZE);
@@ -1175,6 +1515,12 @@
(law_start + RIO_MAINT_WIN_SIZE) >> 12);
out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b); /* 4k */
fsl_rio_doorbell_init(port);
+ fsl_rio_port_write_init(port);
+
+ saved_mcheck_exception = ppc_md.machine_check_exception;
+ ppc_md.machine_check_exception = fsl_rio_mcheck_exception;
+ /* Ensure that RFXE is set */
+ mtspr(SPRN_HID1, (mfspr(SPRN_HID1) | 0x20000));
return 0;
err:
diff --git a/arch/powerpc/sysdev/micropatch.c b/arch/powerpc/sysdev/micropatch.c
index d8d6028..c0bb76e 100644
--- a/arch/powerpc/sysdev/micropatch.c
+++ b/arch/powerpc/sysdev/micropatch.c
@@ -4,6 +4,7 @@
* also relocates SMC2, but this would require additional changes
* to uart.c, so I am holding off on that for a moment.
*/
+#include <linux/init.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
@@ -16,6 +17,7 @@
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/8xx_immap.h>
+#include <asm/cpm.h>
#include <asm/cpm1.h>
/*
@@ -24,7 +26,7 @@
#ifdef CONFIG_I2C_SPI_UCODE_PATCH
-uint patch_2000[] = {
+static uint patch_2000[] __initdata = {
0x7FFFEFD9,
0x3FFD0000,
0x7FFB49F7,
@@ -143,7 +145,7 @@
0x5F8247F8
};
-uint patch_2f00[] = {
+static uint patch_2f00[] __initdata = {
0x3E303430,
0x34343737,
0xABF7BF9B,
@@ -182,7 +184,7 @@
#ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
-uint patch_2000[] = {
+static uint patch_2000[] __initdata = {
0x3fff0000,
0x3ffd0000,
0x3ffb0000,
@@ -505,7 +507,7 @@
0x6079e2bb
};
-uint patch_2f00[] = {
+static uint patch_2f00[] __initdata = {
0x30303030,
0x3e3e3434,
0xabbf9b99,
@@ -572,7 +574,7 @@
0xf22f3f23
};
-uint patch_2e00[] = {
+static uint patch_2e00[] __initdata = {
0x27eeeeee,
0xeeeeeeee,
0xeeeeeeee,
@@ -598,7 +600,7 @@
#ifdef CONFIG_USB_SOF_UCODE_PATCH
-uint patch_2000[] = {
+static uint patch_2000[] __initdata = {
0x7fff0000,
0x7ffd0000,
0x7ffb0000,
@@ -613,21 +615,25 @@
0x60750000
};
-uint patch_2f00[] = {
+static uint patch_2f00[] __initdata = {
0x3030304c,
0xcab9e441,
0xa1aaf220
};
#endif
-void
-cpm_load_patch(cpm8xx_t *cp)
+void __init cpm_load_patch(cpm8xx_t *cp)
{
volatile uint *dp; /* Dual-ported RAM. */
volatile cpm8xx_t *commproc;
+#if defined(CONFIG_I2C_SPI_UCODE_PATCH) || \
+ defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
volatile iic_t *iip;
- volatile spi_t *spp;
+ volatile struct spi_pram *spp;
+#ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
volatile smc_uart_t *smp;
+#endif
+#endif
int i;
commproc = cp;
@@ -668,8 +674,8 @@
/* Put SPI above the IIC, also 32-byte aligned.
*/
i = (RPBASE + sizeof(iic_t) + 31) & ~31;
- spp = (spi_t *)&commproc->cp_dparam[PROFF_SPI];
- spp->spi_rpbase = i;
+ spp = (struct spi_pram *)&commproc->cp_dparam[PROFF_SPI];
+ spp->rpbase = i;
# if defined(CONFIG_I2C_SPI_UCODE_PATCH)
commproc->cp_cpmcr1 = 0x802a;
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 2102487..20b73c0 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1666,7 +1666,7 @@
mpic->save_data[i].dest);
#ifdef CONFIG_MPIC_U3_HT_IRQS
- {
+ if (mpic->fixups) {
struct mpic_irq_fixup *fixup = &mpic->fixups[i];
if (fixup->base) {
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 106d767..156aa7d 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -974,6 +974,123 @@
.setup_utl = ppc460ex_pciex_init_utl,
};
+static int __init ppc460sx_pciex_core_init(struct device_node *np)
+{
+ /* HSS drive amplitude */
+ mtdcri(SDR0, PESDR0_460SX_HSSL0DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR0_460SX_HSSL1DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR0_460SX_HSSL2DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR0_460SX_HSSL3DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR0_460SX_HSSL4DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR0_460SX_HSSL5DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR0_460SX_HSSL6DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR0_460SX_HSSL7DAMP, 0xB9843211);
+
+ mtdcri(SDR0, PESDR1_460SX_HSSL0DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR1_460SX_HSSL1DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR1_460SX_HSSL2DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR1_460SX_HSSL3DAMP, 0xB9843211);
+
+ mtdcri(SDR0, PESDR2_460SX_HSSL0DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR2_460SX_HSSL1DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR2_460SX_HSSL2DAMP, 0xB9843211);
+ mtdcri(SDR0, PESDR2_460SX_HSSL3DAMP, 0xB9843211);
+
+ /* HSS TX pre-emphasis */
+ mtdcri(SDR0, PESDR0_460SX_HSSL0COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR0_460SX_HSSL1COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR0_460SX_HSSL2COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR0_460SX_HSSL3COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR0_460SX_HSSL4COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR0_460SX_HSSL5COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR0_460SX_HSSL6COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR0_460SX_HSSL7COEFA, 0xDCB98987);
+
+ mtdcri(SDR0, PESDR1_460SX_HSSL0COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR1_460SX_HSSL1COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR1_460SX_HSSL2COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR1_460SX_HSSL3COEFA, 0xDCB98987);
+
+ mtdcri(SDR0, PESDR2_460SX_HSSL0COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR2_460SX_HSSL1COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR2_460SX_HSSL2COEFA, 0xDCB98987);
+ mtdcri(SDR0, PESDR2_460SX_HSSL3COEFA, 0xDCB98987);
+
+ /* HSS TX calibration control */
+ mtdcri(SDR0, PESDR0_460SX_HSSL1CALDRV, 0x22222222);
+ mtdcri(SDR0, PESDR1_460SX_HSSL1CALDRV, 0x22220000);
+ mtdcri(SDR0, PESDR2_460SX_HSSL1CALDRV, 0x22220000);
+
+ /* HSS TX slew control */
+ mtdcri(SDR0, PESDR0_460SX_HSSSLEW, 0xFFFFFFFF);
+ mtdcri(SDR0, PESDR1_460SX_HSSSLEW, 0xFFFF0000);
+ mtdcri(SDR0, PESDR2_460SX_HSSSLEW, 0xFFFF0000);
+
+ udelay(100);
+
+ /* De-assert PLLRESET */
+ dcri_clrset(SDR0, PESDR0_PLLLCT2, 0x00000100, 0);
+
+ /* Reset DL, UTL, GPL before configuration */
+ mtdcri(SDR0, PESDR0_460SX_RCSSET,
+ PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
+ mtdcri(SDR0, PESDR1_460SX_RCSSET,
+ PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
+ mtdcri(SDR0, PESDR2_460SX_RCSSET,
+ PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
+
+ udelay(100);
+
+ /*
+ * If bifurcation is not enabled, u-boot would have disabled the
+ * third PCIe port
+ */
+ if (((mfdcri(SDR0, PESDR1_460SX_HSSCTLSET) & 0x00000001) ==
+ 0x00000001)) {
+ printk(KERN_INFO "PCI: PCIE bifurcation setup successfully.\n");
+ printk(KERN_INFO "PCI: Total 3 PCIE ports are present\n");
+ return 3;
+ }
+
+ printk(KERN_INFO "PCI: Total 2 PCIE ports are present\n");
+ return 2;
+}
+
+static int ppc460sx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+
+ if (port->endpoint)
+ dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2,
+ 0x01000000, 0);
+ else
+ dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2,
+ 0, 0x01000000);
+
+ /*Gen-1*/
+ mtdcri(SDR0, port->sdr_base + PESDRn_460SX_RCEI, 0x08000000);
+
+ dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
+ (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL),
+ PESDRx_RCSSET_RSTPYN);
+
+ port->has_ibpre = 1;
+
+ return 0;
+}
+
+static int ppc460sx_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+ /* Max 128 Bytes */
+ out_be32 (port->utl_base + PEUTL_PBBSZ, 0x00000000);
+ return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
+ .core_init = ppc460sx_pciex_core_init,
+ .port_init_hw = ppc460sx_pciex_init_port_hw,
+ .setup_utl = ppc460sx_pciex_init_utl,
+};
+
#endif /* CONFIG_44x */
#ifdef CONFIG_40x
@@ -1089,6 +1206,8 @@
}
if (of_device_is_compatible(np, "ibm,plb-pciex-460ex"))
ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops;
+ if (of_device_is_compatible(np, "ibm,plb-pciex-460sx"))
+ ppc4xx_pciex_hwops = &ppc460sx_pcie_hwops;
#endif /* CONFIG_44x */
#ifdef CONFIG_40x
if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h
index d04e40b..56d9e5d 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.h
+++ b/arch/powerpc/sysdev/ppc4xx_pci.h
@@ -324,6 +324,64 @@
#define PESDR0_460EX_IHS2 0x036D
/*
+ * 460SX addtional DCRs
+ */
+#define PESDRn_460SX_RCEI 0x02
+
+#define PESDR0_460SX_HSSL0DAMP 0x320
+#define PESDR0_460SX_HSSL1DAMP 0x321
+#define PESDR0_460SX_HSSL2DAMP 0x322
+#define PESDR0_460SX_HSSL3DAMP 0x323
+#define PESDR0_460SX_HSSL4DAMP 0x324
+#define PESDR0_460SX_HSSL5DAMP 0x325
+#define PESDR0_460SX_HSSL6DAMP 0x326
+#define PESDR0_460SX_HSSL7DAMP 0x327
+
+#define PESDR1_460SX_HSSL0DAMP 0x354
+#define PESDR1_460SX_HSSL1DAMP 0x355
+#define PESDR1_460SX_HSSL2DAMP 0x356
+#define PESDR1_460SX_HSSL3DAMP 0x357
+
+#define PESDR2_460SX_HSSL0DAMP 0x384
+#define PESDR2_460SX_HSSL1DAMP 0x385
+#define PESDR2_460SX_HSSL2DAMP 0x386
+#define PESDR2_460SX_HSSL3DAMP 0x387
+
+#define PESDR0_460SX_HSSL0COEFA 0x328
+#define PESDR0_460SX_HSSL1COEFA 0x329
+#define PESDR0_460SX_HSSL2COEFA 0x32A
+#define PESDR0_460SX_HSSL3COEFA 0x32B
+#define PESDR0_460SX_HSSL4COEFA 0x32C
+#define PESDR0_460SX_HSSL5COEFA 0x32D
+#define PESDR0_460SX_HSSL6COEFA 0x32E
+#define PESDR0_460SX_HSSL7COEFA 0x32F
+
+#define PESDR1_460SX_HSSL0COEFA 0x358
+#define PESDR1_460SX_HSSL1COEFA 0x359
+#define PESDR1_460SX_HSSL2COEFA 0x35A
+#define PESDR1_460SX_HSSL3COEFA 0x35B
+
+#define PESDR2_460SX_HSSL0COEFA 0x388
+#define PESDR2_460SX_HSSL1COEFA 0x389
+#define PESDR2_460SX_HSSL2COEFA 0x38A
+#define PESDR2_460SX_HSSL3COEFA 0x38B
+
+#define PESDR0_460SX_HSSL1CALDRV 0x339
+#define PESDR1_460SX_HSSL1CALDRV 0x361
+#define PESDR2_460SX_HSSL1CALDRV 0x391
+
+#define PESDR0_460SX_HSSSLEW 0x338
+#define PESDR1_460SX_HSSSLEW 0x360
+#define PESDR2_460SX_HSSSLEW 0x390
+
+#define PESDR0_460SX_HSSCTLSET 0x31E
+#define PESDR1_460SX_HSSCTLSET 0x352
+#define PESDR2_460SX_HSSCTLSET 0x382
+
+#define PESDR0_460SX_RCSSET 0x304
+#define PESDR1_460SX_RCSSET 0x344
+#define PESDR2_460SX_RCSSET 0x374
+/*
* Of the above, some are common offsets from the base
*/
#define PESDRn_UTLSET1 0x00
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 79d0ca0..bee1c0f 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -102,6 +102,7 @@
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_LZMA
+ select HAVE_KERNEL_LZO
select ARCH_INLINE_SPIN_TRYLOCK
select ARCH_INLINE_SPIN_TRYLOCK_BH
select ARCH_INLINE_SPIN_LOCK
@@ -479,13 +480,6 @@
Everybody who wants to run Linux under VM should select this
option.
-config CMM_PROC
- bool "/proc interface to cooperative memory management"
- depends on CMM
- help
- Select this option to enable the /proc interface to the
- cooperative memory management.
-
config CMM_IUCV
bool "IUCV special message interface to cooperative memory management"
depends on CMM && (SMSGIUCV=y || CMM=SMSGIUCV)
diff --git a/arch/s390/appldata/appldata_os.c b/arch/s390/appldata/appldata_os.c
index 55c80ffd..92f1cb7 100644
--- a/arch/s390/appldata/appldata_os.c
+++ b/arch/s390/appldata/appldata_os.c
@@ -181,7 +181,7 @@
goto out;
}
- appldata_os_data = kzalloc(max_size, GFP_DMA);
+ appldata_os_data = kzalloc(max_size, GFP_KERNEL | GFP_DMA);
if (appldata_os_data == NULL) {
rc = -ENOMEM;
goto out;
diff --git a/arch/s390/boot/compressed/Makefile b/arch/s390/boot/compressed/Makefile
index 6e4a67a..1c999f7 100644
--- a/arch/s390/boot/compressed/Makefile
+++ b/arch/s390/boot/compressed/Makefile
@@ -7,7 +7,7 @@
BITS := $(if $(CONFIG_64BIT),64,31)
targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \
- vmlinux.bin.lzma misc.o piggy.o sizes.h head$(BITS).o
+ vmlinux.bin.lzma vmlinux.bin.lzo misc.o piggy.o sizes.h head$(BITS).o
KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
KBUILD_CFLAGS += $(cflags-y)
@@ -47,6 +47,7 @@
suffix-$(CONFIG_KERNEL_GZIP) := gz
suffix-$(CONFIG_KERNEL_BZIP2) := bz2
suffix-$(CONFIG_KERNEL_LZMA) := lzma
+suffix-$(CONFIG_KERNEL_LZO) := lzo
$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y)
$(call if_changed,gzip)
@@ -54,6 +55,8 @@
$(call if_changed,bzip2)
$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y)
$(call if_changed,lzma)
+$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y)
+ $(call if_changed,lzo)
LDFLAGS_piggy.o := -r --format binary --oformat $(LD_BFD) -T
$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y)
diff --git a/arch/s390/boot/compressed/misc.c b/arch/s390/boot/compressed/misc.c
index 14e0479..0851eb1 100644
--- a/arch/s390/boot/compressed/misc.c
+++ b/arch/s390/boot/compressed/misc.c
@@ -50,6 +50,10 @@
#include "../../../../lib/decompress_unlzma.c"
#endif
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
+
extern _sclp_print_early(const char *);
int puts(const char *s)
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index bcd6884..253f158 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc3
-# Fri Apr 9 09:57:10 2010
+# Linux kernel version: 2.6.35-rc1
+# Fri Jun 4 11:32:40 2010
#
CONFIG_SCHED_MC=y
CONFIG_MMU=y
@@ -35,11 +35,13 @@
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
@@ -77,6 +79,7 @@
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_BLK_CGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -157,7 +160,6 @@
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_CGROUP is not set
CONFIG_BLOCK_COMPAT=y
#
@@ -166,7 +168,6 @@
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_CFQ_GROUP_IOSCHED is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
@@ -247,7 +248,6 @@
CONFIG_SMP=y
CONFIG_NR_CPUS=32
CONFIG_HOTPLUG_CPU=y
-# CONFIG_SCHED_BOOK is not set
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_AUDIT_ARCH=y
@@ -320,7 +320,6 @@
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=9
-# CONFIG_PROCESS_DEBUG is not set
CONFIG_PFAULT=y
# CONFIG_SHARED_KERNEL is not set
# CONFIG_CMM is not set
@@ -457,6 +456,7 @@
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
+# CONFIG_NET_SCTPPROBE is not set
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
@@ -465,6 +465,7 @@
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
@@ -525,6 +526,7 @@
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
+CONFIG_RPS=y
#
# Network testing
@@ -546,6 +548,7 @@
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
# CONFIG_PCMCIA is not set
CONFIG_CCW=y
@@ -728,6 +731,7 @@
# Character devices
#
CONFIG_DEVKMEM=y
+# CONFIG_N_GSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -775,6 +779,7 @@
# CONFIG_MONREADER is not set
CONFIG_MONWRITER=m
CONFIG_S390_VMUR=m
+# CONFIG_RAMOOPS is not set
#
# PPS support
@@ -788,10 +793,6 @@
# CONFIG_NEW_LEDS is not set
CONFIG_ACCESSIBILITY=y
# CONFIG_AUXDISPLAY is not set
-
-#
-# TI VLYNQ
-#
# CONFIG_STAGING is not set
#
@@ -976,6 +977,7 @@
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# CONFIG_LKDTM is not set
+# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1010,6 +1012,7 @@
CONFIG_KPROBE_EVENT=y
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_TRACEPOINTS is not set
# CONFIG_SAMPLE_TRACE_EVENTS is not set
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index 451bfbb..76daea1 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -15,6 +15,7 @@
#include <linux/compiler.h>
#include <linux/types.h>
+#include <asm/system.h>
#define ATOMIC_INIT(i) { (i) }
@@ -274,6 +275,7 @@
static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u)
{
long long c, old;
+
c = atomic64_read(v);
for (;;) {
if (unlikely(c == u))
@@ -286,6 +288,23 @@
return c != u;
}
+static inline long long atomic64_dec_if_positive(atomic64_t *v)
+{
+ long long c, old, dec;
+
+ c = atomic64_read(v);
+ for (;;) {
+ dec = c - 1;
+ if (unlikely(dec < 0))
+ break;
+ old = atomic64_cmpxchg((v), c, dec);
+ if (likely(old == c))
+ break;
+ c = old;
+ }
+ return dec;
+}
+
#define atomic64_add(_i, _v) atomic64_add_return(_i, _v)
#define atomic64_add_negative(_i, _v) (atomic64_add_return(_i, _v) < 0)
#define atomic64_inc(_v) atomic64_add_return(1, _v)
diff --git a/arch/s390/include/asm/cache.h b/arch/s390/include/asm/cache.h
index 9b86681..24aafa6 100644
--- a/arch/s390/include/asm/cache.h
+++ b/arch/s390/include/asm/cache.h
@@ -14,6 +14,6 @@
#define L1_CACHE_BYTES 256
#define L1_CACHE_SHIFT 8
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
#endif
diff --git a/arch/s390/include/asm/ccwdev.h b/arch/s390/include/asm/ccwdev.h
index f4bd346..1c0030f 100644
--- a/arch/s390/include/asm/ccwdev.h
+++ b/arch/s390/include/asm/ccwdev.h
@@ -91,6 +91,14 @@
void (*handler) (struct ccw_device *, unsigned long, struct irb *);
};
+/*
+ * Possible CIO actions triggered by the unit check handler.
+ */
+enum uc_todo {
+ UC_TODO_RETRY,
+ UC_TODO_RETRY_ON_NEW_PATH,
+ UC_TODO_STOP
+};
/**
* struct ccw driver - device driver for channel attached devices
@@ -107,6 +115,7 @@
* @freeze: callback for freezing during hibernation snapshotting
* @thaw: undo work done in @freeze
* @restore: callback for restoring after hibernation
+ * @uc_handler: callback for unit check handler
* @driver: embedded device driver structure
* @name: device driver name
*/
@@ -124,6 +133,7 @@
int (*freeze)(struct ccw_device *);
int (*thaw) (struct ccw_device *);
int (*restore)(struct ccw_device *);
+ enum uc_todo (*uc_handler) (struct ccw_device *, struct irb *);
struct device_driver driver;
char *name;
};
diff --git a/arch/s390/include/asm/scatterlist.h b/arch/s390/include/asm/scatterlist.h
index 35d786f..be44d94 100644
--- a/arch/s390/include/asm/scatterlist.h
+++ b/arch/s390/include/asm/scatterlist.h
@@ -1 +1,3 @@
+#define ISA_DMA_THRESHOLD (~0UL)
+
#include <asm-generic/scatterlist.h>
diff --git a/arch/s390/include/asm/sfp-util.h b/arch/s390/include/asm/sfp-util.h
index 7d43fee..0addc64 100644
--- a/arch/s390/include/asm/sfp-util.h
+++ b/arch/s390/include/asm/sfp-util.h
@@ -73,3 +73,5 @@
#define UDIV_NEEDS_NORMALIZATION 0
#define abort() return 0
+
+#define __BYTE_ORDER __BIG_ENDIAN
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index d9b490a..5232278 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -132,8 +132,6 @@
DEFINE(__LC_MCCK_CLOCK, offsetof(struct _lowcore, mcck_clock));
DEFINE(__LC_MACHINE_FLAGS, offsetof(struct _lowcore, machine_flags));
DEFINE(__LC_FTRACE_FUNC, offsetof(struct _lowcore, ftrace_func));
- DEFINE(__LC_SIE_HOOK, offsetof(struct _lowcore, sie_hook));
- DEFINE(__LC_CMF_HPP, offsetof(struct _lowcore, cmf_hpp));
DEFINE(__LC_IRB, offsetof(struct _lowcore, irb));
DEFINE(__LC_CPU_TIMER_SAVE_AREA, offsetof(struct _lowcore, cpu_timer_save_area));
DEFINE(__LC_CLOCK_COMP_SAVE_AREA, offsetof(struct _lowcore, clock_comp_save_area));
@@ -154,6 +152,8 @@
DEFINE(__LC_FP_CREG_SAVE_AREA, offsetof(struct _lowcore, fpt_creg_save_area));
DEFINE(__LC_LAST_BREAK, offsetof(struct _lowcore, breaking_event_addr));
DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data));
+ DEFINE(__LC_SIE_HOOK, offsetof(struct _lowcore, sie_hook));
+ DEFINE(__LC_CMF_HPP, offsetof(struct _lowcore, cmf_hpp));
#endif /* CONFIG_32BIT */
return 0;
}
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 178d925..e7192e1 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -65,7 +65,7 @@
ltgr %r3,%r3
jz 0f
basr %r14,%r3
- 0:
+0:
#endif
.endm
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 3d34eef..2a3d2bf 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -63,6 +63,8 @@
case 0x0b: /* bsm */
case 0x83: /* diag */
case 0x44: /* ex */
+ case 0xac: /* stnsm */
+ case 0xad: /* stosm */
return -EINVAL;
}
switch (*(__u16 *) instruction) {
@@ -72,6 +74,7 @@
case 0xb258: /* bsg */
case 0xb218: /* pc */
case 0xb228: /* pt */
+ case 0xb98d: /* epsw */
return -EINVAL;
}
return 0;
diff --git a/arch/s390/kernel/module.c b/arch/s390/kernel/module.c
index 639380a..22cfd63 100644
--- a/arch/s390/kernel/module.c
+++ b/arch/s390/kernel/module.c
@@ -55,8 +55,10 @@
/* Free memory returned from module_alloc */
void module_free(struct module *mod, void *module_region)
{
- vfree(mod->arch.syminfo);
- mod->arch.syminfo = NULL;
+ if (mod) {
+ vfree(mod->arch.syminfo);
+ mod->arch.syminfo = NULL;
+ }
vfree(module_region);
}
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 7d89324..c8e8e13 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -401,7 +401,6 @@
lc->io_new_psw.mask = psw_kernel_bits;
lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler;
lc->clock_comparator = -1ULL;
- lc->cmf_hpp = -1ULL;
lc->kernel_stack = ((unsigned long) &init_thread_union) + THREAD_SIZE;
lc->async_stack = (unsigned long)
__alloc_bootmem(ASYNC_SIZE, ASYNC_SIZE, 0) + ASYNC_SIZE;
@@ -418,6 +417,7 @@
__ctl_set_bit(14, 29);
}
#else
+ lc->cmf_hpp = -1ULL;
lc->vdso_per_cpu_data = (unsigned long) &lc->paste[0];
#endif
lc->sync_enter_timer = S390_lowcore.sync_enter_timer;
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index e4d98de..541053e 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -944,21 +944,21 @@
struct cpu *c = &per_cpu(cpu_devices, cpu);
struct sys_device *s = &c->sysdev;
struct s390_idle_data *idle;
+ int err = 0;
switch (action) {
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
idle = &per_cpu(s390_idle, cpu);
memset(idle, 0, sizeof(struct s390_idle_data));
- if (sysfs_create_group(&s->kobj, &cpu_online_attr_group))
- return NOTIFY_BAD;
+ err = sysfs_create_group(&s->kobj, &cpu_online_attr_group);
break;
case CPU_DEAD:
case CPU_DEAD_FROZEN:
sysfs_remove_group(&s->kobj, &cpu_online_attr_group);
break;
}
- return NOTIFY_OK;
+ return notifier_from_errno(err);
}
static struct notifier_block __cpuinitdata smp_cpu_nb = {
diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S
index c56d3f5..1f066e4 100644
--- a/arch/s390/kernel/swsusp_asm64.S
+++ b/arch/s390/kernel/swsusp_asm64.S
@@ -264,7 +264,7 @@
lghi %r2,0
br %r14
- .section .data.nosave,"aw",@progbits
+ .section .data..nosave,"aw",@progbits
.align 8
.Ldisabled_wait_31:
.long 0x000a0000,0x00000000
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index 2f4b687..a725158 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -33,17 +33,6 @@
If unsure, say N.
-config KVM_AWARE_CMF
- depends on KVM
- bool "KVM aware sampling"
- ---help---
- This option enhances the sampling data from the CPU Measurement
- Facility with additional information, that allows to distinguish
- guest(s) and host when using the kernel based virtual machine
- functionality.
-
- If unsure, say N.
-
# OK, it's a little counter-intuitive to do this, but it puts it neatly under
# the virtualization menu.
source drivers/vhost/Kconfig
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 8093e6f..ae37058 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -761,7 +761,7 @@
* to hold the maximum amount of facilites. On the other hand, we
* only set facilities that are known to work in KVM.
*/
- facilities = (unsigned long long *) get_zeroed_page(GFP_DMA);
+ facilities = (unsigned long long *) get_zeroed_page(GFP_KERNEL|GFP_DMA);
if (!facilities) {
kvm_exit();
return -ENOMEM;
diff --git a/arch/s390/kvm/sie64a.S b/arch/s390/kvm/sie64a.S
index 31646bd..7e9d30d 100644
--- a/arch/s390/kvm/sie64a.S
+++ b/arch/s390/kvm/sie64a.S
@@ -32,12 +32,10 @@
.macro SPP newpp
-#ifdef CONFIG_KVM_AWARE_CMF
tm __LC_MACHINE_FLAGS+6,0x20 # MACHINE_FLAG_SPP
jz 0f
.insn s,0xb2800000,\newpp
- 0:
-#endif
+0:
.endm
sie_irq_handler:
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index eff3c59..702276f 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -113,7 +113,7 @@
{
struct kvm_s390_interrupt_info *inti;
- inti = kzalloc(sizeof(*inti), GFP_KERNEL);
+ inti = kzalloc(sizeof(*inti), GFP_ATOMIC);
if (!inti)
return -ENOMEM;
inti->type = KVM_S390_SIGP_STOP;
diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c
index f87b347..eb6a2ef 100644
--- a/arch/s390/mm/cmm.c
+++ b/arch/s390/mm/cmm.c
@@ -1,11 +1,9 @@
/*
- * arch/s390/mm/cmm.c
- *
- * S390 version
- * Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
- *
* Collaborative memory management interface.
+ *
+ * Copyright IBM Corp 2003,2010
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ *
*/
#include <linux/errno.h>
@@ -20,9 +18,9 @@
#include <linux/kthread.h>
#include <linux/oom.h>
#include <linux/suspend.h>
+#include <linux/uaccess.h>
#include <asm/pgalloc.h>
-#include <asm/uaccess.h>
#include <asm/diag.h>
static char *sender = "VMRMSVM";
@@ -53,14 +51,14 @@
static DEFINE_SPINLOCK(cmm_lock);
static struct task_struct *cmm_thread_ptr;
-static wait_queue_head_t cmm_thread_wait;
-static struct timer_list cmm_timer;
+static DECLARE_WAIT_QUEUE_HEAD(cmm_thread_wait);
+static DEFINE_TIMER(cmm_timer, NULL, 0, 0);
static void cmm_timer_fn(unsigned long);
static void cmm_set_timer(void);
-static long
-cmm_alloc_pages(long nr, long *counter, struct cmm_page_array **list)
+static long cmm_alloc_pages(long nr, long *counter,
+ struct cmm_page_array **list)
{
struct cmm_page_array *pa, *npa;
unsigned long addr;
@@ -99,8 +97,7 @@
return nr;
}
-static long
-cmm_free_pages(long nr, long *counter, struct cmm_page_array **list)
+static long cmm_free_pages(long nr, long *counter, struct cmm_page_array **list)
{
struct cmm_page_array *pa;
unsigned long addr;
@@ -140,11 +137,10 @@
}
static struct notifier_block cmm_oom_nb = {
- .notifier_call = cmm_oom_notify
+ .notifier_call = cmm_oom_notify,
};
-static int
-cmm_thread(void *dummy)
+static int cmm_thread(void *dummy)
{
int rc;
@@ -170,7 +166,7 @@
cmm_timed_pages_target = cmm_timed_pages;
} else if (cmm_timed_pages_target < cmm_timed_pages) {
cmm_free_pages(1, &cmm_timed_pages,
- &cmm_timed_page_list);
+ &cmm_timed_page_list);
}
if (cmm_timed_pages > 0 && !timer_pending(&cmm_timer))
cmm_set_timer();
@@ -178,14 +174,12 @@
return 0;
}
-static void
-cmm_kick_thread(void)
+static void cmm_kick_thread(void)
{
wake_up(&cmm_thread_wait);
}
-static void
-cmm_set_timer(void)
+static void cmm_set_timer(void)
{
if (cmm_timed_pages_target <= 0 || cmm_timeout_seconds <= 0) {
if (timer_pending(&cmm_timer))
@@ -202,8 +196,7 @@
add_timer(&cmm_timer);
}
-static void
-cmm_timer_fn(unsigned long ignored)
+static void cmm_timer_fn(unsigned long ignored)
{
long nr;
@@ -216,57 +209,49 @@
cmm_set_timer();
}
-void
-cmm_set_pages(long nr)
+static void cmm_set_pages(long nr)
{
cmm_pages_target = nr;
cmm_kick_thread();
}
-long
-cmm_get_pages(void)
+static long cmm_get_pages(void)
{
return cmm_pages;
}
-void
-cmm_add_timed_pages(long nr)
+static void cmm_add_timed_pages(long nr)
{
cmm_timed_pages_target += nr;
cmm_kick_thread();
}
-long
-cmm_get_timed_pages(void)
+static long cmm_get_timed_pages(void)
{
return cmm_timed_pages;
}
-void
-cmm_set_timeout(long nr, long seconds)
+static void cmm_set_timeout(long nr, long seconds)
{
cmm_timeout_pages = nr;
cmm_timeout_seconds = seconds;
cmm_set_timer();
}
-static int
-cmm_skip_blanks(char *cp, char **endp)
+static int cmm_skip_blanks(char *cp, char **endp)
{
char *str;
- for (str = cp; *str == ' ' || *str == '\t'; str++);
+ for (str = cp; *str == ' ' || *str == '\t'; str++)
+ ;
*endp = str;
return str != cp;
}
-#ifdef CONFIG_CMM_PROC
-
static struct ctl_table cmm_table[];
-static int
-cmm_pages_handler(ctl_table *ctl, int write,
- void __user *buffer, size_t *lenp, loff_t *ppos)
+static int cmm_pages_handler(ctl_table *ctl, int write, void __user *buffer,
+ size_t *lenp, loff_t *ppos)
{
char buf[16], *p;
long nr;
@@ -305,9 +290,8 @@
return 0;
}
-static int
-cmm_timeout_handler(ctl_table *ctl, int write,
- void __user *buffer, size_t *lenp, loff_t *ppos)
+static int cmm_timeout_handler(ctl_table *ctl, int write, void __user *buffer,
+ size_t *lenp, loff_t *ppos)
{
char buf[64], *p;
long nr, seconds;
@@ -370,12 +354,10 @@
},
{ }
};
-#endif
#ifdef CONFIG_CMM_IUCV
#define SMSG_PREFIX "CMM"
-static void
-cmm_smsg_target(const char *from, char *msg)
+static void cmm_smsg_target(const char *from, char *msg)
{
long nr, seconds;
@@ -445,16 +427,13 @@
.notifier_call = cmm_power_event,
};
-static int
-cmm_init (void)
+static int cmm_init(void)
{
int rc = -ENOMEM;
-#ifdef CONFIG_CMM_PROC
cmm_sysctl_header = register_sysctl_table(cmm_dir_table);
if (!cmm_sysctl_header)
goto out_sysctl;
-#endif
#ifdef CONFIG_CMM_IUCV
rc = smsg_register_callback(SMSG_PREFIX, cmm_smsg_target);
if (rc < 0)
@@ -466,8 +445,6 @@
rc = register_pm_notifier(&cmm_power_notifier);
if (rc)
goto out_pm;
- init_waitqueue_head(&cmm_thread_wait);
- init_timer(&cmm_timer);
cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
rc = IS_ERR(cmm_thread_ptr) ? PTR_ERR(cmm_thread_ptr) : 0;
if (rc)
@@ -483,36 +460,26 @@
smsg_unregister_callback(SMSG_PREFIX, cmm_smsg_target);
out_smsg:
#endif
-#ifdef CONFIG_CMM_PROC
unregister_sysctl_table(cmm_sysctl_header);
out_sysctl:
-#endif
+ del_timer_sync(&cmm_timer);
return rc;
}
+module_init(cmm_init);
-static void
-cmm_exit(void)
+static void cmm_exit(void)
{
- kthread_stop(cmm_thread_ptr);
- unregister_pm_notifier(&cmm_power_notifier);
- unregister_oom_notifier(&cmm_oom_nb);
- cmm_free_pages(cmm_pages, &cmm_pages, &cmm_page_list);
- cmm_free_pages(cmm_timed_pages, &cmm_timed_pages, &cmm_timed_page_list);
-#ifdef CONFIG_CMM_PROC
unregister_sysctl_table(cmm_sysctl_header);
-#endif
#ifdef CONFIG_CMM_IUCV
smsg_unregister_callback(SMSG_PREFIX, cmm_smsg_target);
#endif
+ unregister_pm_notifier(&cmm_power_notifier);
+ unregister_oom_notifier(&cmm_oom_nb);
+ kthread_stop(cmm_thread_ptr);
+ del_timer_sync(&cmm_timer);
+ cmm_free_pages(cmm_pages, &cmm_pages, &cmm_page_list);
+ cmm_free_pages(cmm_timed_pages, &cmm_timed_pages, &cmm_timed_page_list);
}
-
-module_init(cmm_init);
module_exit(cmm_exit);
-EXPORT_SYMBOL(cmm_set_pages);
-EXPORT_SYMBOL(cmm_get_pages);
-EXPORT_SYMBOL(cmm_add_timed_pages);
-EXPORT_SYMBOL(cmm_get_timed_pages);
-EXPORT_SYMBOL(cmm_set_timeout);
-
MODULE_LICENSE("GPL");
diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c
index 6409fd57e..3cc95dd 100644
--- a/arch/s390/mm/extmem.c
+++ b/arch/s390/mm/extmem.c
@@ -105,7 +105,7 @@
dcss_set_subcodes(void)
{
#ifdef CONFIG_64BIT
- char *name = kmalloc(8 * sizeof(char), GFP_DMA);
+ char *name = kmalloc(8 * sizeof(char), GFP_KERNEL | GFP_DMA);
unsigned long rx, ry;
int rc;
@@ -252,12 +252,13 @@
static int
query_segment_type (struct dcss_segment *seg)
{
- struct qin64 *qin = kmalloc (sizeof(struct qin64), GFP_DMA);
- struct qout64 *qout = kmalloc (sizeof(struct qout64), GFP_DMA);
-
- int diag_cc, rc, i;
unsigned long dummy, vmrc;
+ int diag_cc, rc, i;
+ struct qout64 *qout;
+ struct qin64 *qin;
+ qin = kmalloc(sizeof(*qin), GFP_KERNEL | GFP_DMA);
+ qout = kmalloc(sizeof(*qout), GFP_KERNEL | GFP_DMA);
if ((qin == NULL) || (qout == NULL)) {
rc = -ENOMEM;
goto out_free;
@@ -286,7 +287,7 @@
copy data for the new format. */
if (segext_scode == DCSS_SEGEXT) {
struct qout64_old *qout_old;
- qout_old = kzalloc(sizeof(struct qout64_old), GFP_DMA);
+ qout_old = kzalloc(sizeof(*qout_old), GFP_KERNEL | GFP_DMA);
if (qout_old == NULL) {
rc = -ENOMEM;
goto out_free;
@@ -407,11 +408,11 @@
static int
__segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long *end)
{
- struct dcss_segment *seg = kmalloc(sizeof(struct dcss_segment),
- GFP_DMA);
- int rc, diag_cc;
unsigned long start_addr, end_addr, dummy;
+ struct dcss_segment *seg;
+ int rc, diag_cc;
+ seg = kmalloc(sizeof(*seg), GFP_KERNEL | GFP_DMA);
if (seg == NULL) {
rc = -ENOMEM;
goto out;
diff --git a/arch/score/include/asm/scatterlist.h b/arch/score/include/asm/scatterlist.h
index 9f533b8..4fa1a66 100644
--- a/arch/score/include/asm/scatterlist.h
+++ b/arch/score/include/asm/scatterlist.h
@@ -1,6 +1,8 @@
#ifndef _ASM_SCORE_SCATTERLIST_H
#define _ASM_SCORE_SCATTERLIST_H
+#define ISA_DMA_THRESHOLD (~0UL)
+
#include <asm-generic/scatterlist.h>
#endif /* _ASM_SCORE_SCATTERLIST_H */
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 0e318c9..82868fe 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -9,8 +9,8 @@
def_bool y
select EMBEDDED
select HAVE_CLK
- select HAVE_IDE
- select HAVE_LMB
+ select HAVE_IDE if HAS_IOPORT
+ select HAVE_MEMBLOCK
select HAVE_OPROFILE
select HAVE_GENERIC_DMA_COHERENT
select HAVE_ARCH_TRACEHOOK
@@ -174,6 +174,9 @@
config ARCH_HAS_CPU_IDLE_WAIT
def_bool y
+config NO_IOPORT
+ bool
+
config IO_TRAPPED
bool
@@ -186,6 +189,9 @@
config NEED_DMA_MAP_STATE
def_bool DMA_NONCOHERENT
+config NEED_SG_DMA_LENGTH
+ def_bool y
+
source "init/Kconfig"
source "kernel/Kconfig.freezer"
@@ -773,6 +779,17 @@
default "0x00010000" if PAGE_SIZE_64KB
default "0x00000000"
+config ROMIMAGE_MMCIF
+ bool "Include MMCIF loader in romImage (EXPERIMENTAL)"
+ depends on CPU_SUBTYPE_SH7724 && EXPERIMENTAL
+ help
+ Say Y here to include experimental MMCIF loading code in
+ romImage. With this enabled it is possible to write the romImage
+ kernel image to an MMC card and boot the kernel straight from
+ the reset vector. At reset the processor Mask ROM will load the
+ first part of the romImage which in turn loads the rest the kernel
+ image to RAM using the MMCIF hardware block.
+
choice
prompt "Kernel command line"
optional
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 938e87d..07b35ca 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -154,6 +154,7 @@
bool "SDK7786"
depends on CPU_SUBTYPE_SH7786
select SYS_SUPPORTS_PCI
+ select NO_IOPORT if !PCI
help
Select SDK7786 if configuring for a Renesas Technology Europe
SH7786-65nm board.
@@ -190,6 +191,7 @@
depends on CPU_SUBTYPE_SH7786
select ARCH_REQUIRE_GPIOLIB
select SYS_SUPPORTS_PCI
+ select NO_IOPORT if !PCI
config SH_MIGOR
bool "Migo-R"
@@ -286,6 +288,7 @@
config SH_X3PROTO
bool "SH-X3 Prototype board"
depends on CPU_SUBTYPE_SHX3
+ select NO_IOPORT if !PCI
config SH_MAGIC_PANEL_R2
bool "Magic Panel R2"
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 57e37e2..3a170bd 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -328,7 +328,7 @@
.set_capture = camera_set_capture,
};
-struct soc_camera_link camera_link = {
+static struct soc_camera_link camera_link = {
.bus_id = 0,
.add_device = ap325rxa_camera_add,
.del_device = ap325rxa_camera_del,
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 4971425..1d7b495 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -12,6 +12,8 @@
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
@@ -23,10 +25,8 @@
#include <linux/spi/spi.h>
#include <linux/spi/sh_msiof.h>
#include <linux/spi/mmc_spi.h>
-#include <linux/mmc/host.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
-#include <linux/mfd/sh_mobile_sdhi.h>
#include <video/sh_mobile_lcdc.h>
#include <sound/sh_fsi.h>
#include <media/sh_mobile_ceu.h>
@@ -139,7 +139,7 @@
},
};
-struct sh_eth_plat_data sh_eth_plat = {
+static struct sh_eth_plat_data sh_eth_plat = {
.phy = 0x1f, /* SMSC LAN8700 */
.edmac_endian = EDMAC_LITTLE_ENDIAN,
.ether_link_active_low = 1
@@ -159,7 +159,7 @@
};
/* USB0 host */
-void usb0_port_power(int port, int power)
+static void usb0_port_power(int port, int power)
{
gpio_set_value(GPIO_PTB4, power);
}
@@ -195,7 +195,7 @@
};
/* USB1 host/function */
-void usb1_port_power(int port, int power)
+static void usb1_port_power(int port, int power)
{
gpio_set_value(GPIO_PTB5, power);
}
@@ -421,7 +421,7 @@
return 0;
}
-struct tsc2007_platform_data tsc2007_info = {
+static struct tsc2007_platform_data tsc2007_info = {
.model = 2007,
.x_plate_ohms = 180,
.get_pendown_state = ts_get_pendown_state,
@@ -436,7 +436,7 @@
};
#ifdef CONFIG_MFD_SH_MOBILE_SDHI
-/* SHDI0 */
+/* SDHI0 */
static void sdhi0_set_pwr(struct platform_device *pdev, int state)
{
gpio_set_value(GPIO_PTB6, state);
@@ -474,7 +474,8 @@
},
};
-/* SHDI1 */
+#if !defined(CONFIG_MMC_SH_MMCIF)
+/* SDHI1 */
static void sdhi1_set_pwr(struct platform_device *pdev, int state)
{
gpio_set_value(GPIO_PTB7, state);
@@ -511,6 +512,7 @@
.hwblk_id = HWBLK_SDHI1,
},
};
+#endif /* CONFIG_MMC_SH_MMCIF */
#else
@@ -720,7 +722,7 @@
.rate = 0, /* unknown */
};
-struct sh_fsi_platform_info fsi_info = {
+static struct sh_fsi_platform_info fsi_info = {
.portb_flags = SH_FSI_BRS_INV |
SH_FSI_OUT_SLAVE_MODE |
SH_FSI_IN_SLAVE_MODE |
@@ -777,7 +779,7 @@
#include <media/ak881x.h>
#include <media/sh_vou.h>
-struct ak881x_pdata ak881x_pdata = {
+static struct ak881x_pdata ak881x_pdata = {
.flags = AK881X_IF_MODE_SLAVE,
};
@@ -786,7 +788,7 @@
.platform_data = &ak881x_pdata,
};
-struct sh_vou_pdata sh_vou_pdata = {
+static struct sh_vou_pdata sh_vou_pdata = {
.bus_fmt = SH_VOU_BUS_8BIT,
.flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
.board_info = &ak8813,
@@ -819,6 +821,58 @@
},
};
+#if defined(CONFIG_MMC_SH_MMCIF)
+/* SH_MMCIF */
+static void mmcif_set_pwr(struct platform_device *pdev, int state)
+{
+ gpio_set_value(GPIO_PTB7, state);
+}
+
+static void mmcif_down_pwr(struct platform_device *pdev)
+{
+ gpio_set_value(GPIO_PTB7, 0);
+}
+
+static struct resource sh_mmcif_resources[] = {
+ [0] = {
+ .name = "SH_MMCIF",
+ .start = 0xA4CA0000,
+ .end = 0xA4CA00FF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* MMC2I */
+ .start = 29,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* MMC3I */
+ .start = 30,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+ .set_pwr = mmcif_set_pwr,
+ .down_pwr = mmcif_down_pwr,
+ .sup_pclk = 0, /* SH7724: Max Pclk/2 */
+ .caps = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_8_BIT_DATA |
+ MMC_CAP_NEEDS_POLL,
+ .ocr = MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct platform_device sh_mmcif_device = {
+ .name = "sh_mmcif",
+ .id = 0,
+ .dev = {
+ .platform_data = &sh_mmcif_plat,
+ },
+ .num_resources = ARRAY_SIZE(sh_mmcif_resources),
+ .resource = sh_mmcif_resources,
+};
+#endif
+
static struct platform_device *ecovec_devices[] __initdata = {
&heartbeat_device,
&nor_flash_device,
@@ -831,7 +885,9 @@
&keysc_device,
#ifdef CONFIG_MFD_SH_MOBILE_SDHI
&sdhi0_device,
+#if !defined(CONFIG_MMC_SH_MMCIF)
&sdhi1_device,
+#endif
#else
&msiof0_device,
#endif
@@ -841,6 +897,9 @@
&fsi_device,
&irda_device,
&vou_device,
+#if defined(CONFIG_MMC_SH_MMCIF)
+ &sh_mmcif_device,
+#endif
};
#ifdef CONFIG_I2C
@@ -1134,6 +1193,7 @@
gpio_request(GPIO_PTB6, NULL);
gpio_direction_output(GPIO_PTB6, 0);
+#if !defined(CONFIG_MMC_SH_MMCIF)
/* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
gpio_request(GPIO_FN_SDHI1CD, NULL);
gpio_request(GPIO_FN_SDHI1WP, NULL);
@@ -1148,6 +1208,7 @@
/* I/O buffer drive ability is high for SDHI1 */
__raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
+#endif /* CONFIG_MMC_SH_MMCIF */
#else
/* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
@@ -1223,6 +1284,25 @@
gpio_request(GPIO_PTU5, NULL);
gpio_direction_output(GPIO_PTU5, 0);
+#if defined(CONFIG_MMC_SH_MMCIF)
+ /* enable MMCIF (needs DS2.6,7 set to OFF,ON) */
+ gpio_request(GPIO_FN_MMC_D7, NULL);
+ gpio_request(GPIO_FN_MMC_D6, NULL);
+ gpio_request(GPIO_FN_MMC_D5, NULL);
+ gpio_request(GPIO_FN_MMC_D4, NULL);
+ gpio_request(GPIO_FN_MMC_D3, NULL);
+ gpio_request(GPIO_FN_MMC_D2, NULL);
+ gpio_request(GPIO_FN_MMC_D1, NULL);
+ gpio_request(GPIO_FN_MMC_D0, NULL);
+ gpio_request(GPIO_FN_MMC_CLK, NULL);
+ gpio_request(GPIO_FN_MMC_CMD, NULL);
+ gpio_request(GPIO_PTB7, NULL);
+ gpio_direction_output(GPIO_PTB7, 0);
+
+ /* I/O buffer drive ability is high for MMCIF */
+ __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
+#endif
+
/* enable I2C device */
i2c_register_board_info(0, i2c0_devices,
ARRAY_SIZE(i2c0_devices));
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 87185de..662debe 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -181,7 +181,7 @@
return gpio_get_value(GPIO_PTA1); /* NAND_RBn */
}
-struct platform_nand_data migor_nand_flash_data = {
+static struct platform_nand_data migor_nand_flash_data = {
.chip = {
.nr_chips = 1,
.partitions = migor_nand_flash_partitions,
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index f9b8254..552ebd9 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -283,7 +283,7 @@
};
/* change J20, J21, J22 pin to 1-2 connection to use slave mode */
-struct sh_fsi_platform_info fsi_info = {
+static struct sh_fsi_platform_info fsi_info = {
.porta_flags = SH_FSI_BRS_INV |
SH_FSI_OUT_SLAVE_MODE |
SH_FSI_IN_SLAVE_MODE |
@@ -371,7 +371,7 @@
},
};
-struct sh_eth_plat_data sh_eth_plat = {
+static struct sh_eth_plat_data sh_eth_plat = {
.phy = 0x1f, /* SMSC LAN8187 */
.edmac_endian = EDMAC_LITTLE_ENDIAN,
};
@@ -535,7 +535,7 @@
#include <media/ak881x.h>
#include <media/sh_vou.h>
-struct ak881x_pdata ak881x_pdata = {
+static struct ak881x_pdata ak881x_pdata = {
.flags = AK881X_IF_MODE_SLAVE,
};
@@ -545,7 +545,7 @@
.platform_data = &ak881x_pdata,
};
-struct sh_vou_pdata sh_vou_pdata = {
+static struct sh_vou_pdata sh_vou_pdata = {
.bus_fmt = SH_VOU_BUS_8BIT,
.flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
.board_info = &ak8813,
diff --git a/arch/sh/boot/compressed/vmlinux.scr b/arch/sh/boot/compressed/vmlinux.scr
index f02382a..862d748 100644
--- a/arch/sh/boot/compressed/vmlinux.scr
+++ b/arch/sh/boot/compressed/vmlinux.scr
@@ -1,6 +1,6 @@
SECTIONS
{
- .rodata.compressed : {
+ .rodata..compressed : {
input_len = .;
LONG(input_data_end - input_data) input_data = .;
*(.data)
diff --git a/arch/sh/boot/romimage/Makefile b/arch/sh/boot/romimage/Makefile
index f473a24..2216ee5 100644
--- a/arch/sh/boot/romimage/Makefile
+++ b/arch/sh/boot/romimage/Makefile
@@ -1,16 +1,21 @@
#
# linux/arch/sh/boot/romimage/Makefile
#
-# create an image suitable for burning to flash from zImage
+# create an romImage file suitable for burning to flash/mmc from zImage
#
targets := vmlinux head.o zeropage.bin piggy.o
+load-y := 0
-OBJECTS = $(obj)/head.o
-LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext 0 -e romstart \
+mmcif-load-$(CONFIG_CPU_SUBTYPE_SH7724) := 0xe5200000 # ILRAM
+mmcif-obj-$(CONFIG_CPU_SUBTYPE_SH7724) := $(obj)/mmcif-sh7724.o
+load-$(CONFIG_ROMIMAGE_MMCIF) := $(mmcif-load-y)
+obj-$(CONFIG_ROMIMAGE_MMCIF) := $(mmcif-obj-y)
+
+LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(load-y) -e romstart \
-T $(obj)/../../kernel/vmlinux.lds
-$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
+$(obj)/vmlinux: $(obj)/head.o $(obj-y) $(obj)/piggy.o FORCE
$(call if_changed,ld)
@:
diff --git a/arch/sh/boot/romimage/head.S b/arch/sh/boot/romimage/head.S
index 93e779a..4671d1b 100644
--- a/arch/sh/boot/romimage/head.S
+++ b/arch/sh/boot/romimage/head.S
@@ -12,8 +12,40 @@
/* include board specific setup code */
#include <mach/romimage.h>
+#ifdef CONFIG_ROMIMAGE_MMCIF
+ /* load the romImage to above the empty zero page */
+ mov.l empty_zero_page_dst, r4
+ mov.l empty_zero_page_dst_adj, r5
+ add r5, r4
+ mov.l bytes_to_load, r5
+ mov.l loader_function, r7
+ jsr @r7
+ mov r4, r15
+
+ mov.l empty_zero_page_dst, r4
+ mov.l empty_zero_page_dst_adj, r5
+ add r5, r4
+ mov.l loaded_code_offs, r5
+ add r5, r4
+ jmp @r4
+ nop
+
+ .balign 4
+empty_zero_page_dst_adj:
+ .long PAGE_SIZE
+bytes_to_load:
+ .long end_data - romstart
+loader_function:
+ .long mmcif_loader
+loaded_code_offs:
+ .long loaded_code - romstart
+loaded_code:
+#endif /* CONFIG_ROMIMAGE_MMCIF */
+
/* copy the empty_zero_page contents to where vmlinux expects it */
- mova empty_zero_page_src, r0
+ mova extra_data_pos, r0
+ mov.l extra_data_size, r1
+ add r1, r0
mov.l empty_zero_page_dst, r1
mov #(PAGE_SHIFT - 4), r4
mov #1, r3
@@ -37,7 +69,9 @@
mov #PAGE_SHIFT, r4
mov #1, r1
shld r4, r1
- mova empty_zero_page_src, r0
+ mova extra_data_pos, r0
+ add r1, r0
+ mov.l extra_data_size, r1
add r1, r0
jmp @r0
nop
@@ -45,4 +79,6 @@
.align 2
empty_zero_page_dst:
.long _text
-empty_zero_page_src:
+extra_data_pos:
+extra_data_size:
+ .long zero_page_pos - extra_data_pos
diff --git a/arch/sh/boot/romimage/mmcif-sh7724.c b/arch/sh/boot/romimage/mmcif-sh7724.c
new file mode 100644
index 0000000..14863d7
--- /dev/null
+++ b/arch/sh/boot/romimage/mmcif-sh7724.c
@@ -0,0 +1,72 @@
+/*
+ * sh7724 MMCIF loader
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/mmc/sh_mmcif.h>
+#include <mach/romimage.h>
+
+#define MMCIF_BASE (void __iomem *)0xa4ca0000
+
+#define MSTPCR2 0xa4150038
+#define PTWCR 0xa4050146
+#define PTXCR 0xa4050148
+#define PSELA 0xa405014e
+#define PSELE 0xa4050156
+#define HIZCRC 0xa405015c
+#define DRVCRA 0xa405018a
+
+enum { MMCIF_PROGRESS_ENTER, MMCIF_PROGRESS_INIT,
+ MMCIF_PROGRESS_LOAD, MMCIF_PROGRESS_DONE };
+
+/* SH7724 specific MMCIF loader
+ *
+ * loads the romImage from an MMC card starting from block 512
+ * use the following line to write the romImage to an MMC card
+ * # dd if=arch/sh/boot/romImage of=/dev/sdx bs=512 seek=512
+ */
+asmlinkage void mmcif_loader(unsigned char *buf, unsigned long no_bytes)
+{
+ mmcif_update_progress(MMCIF_PROGRESS_ENTER);
+
+ /* enable clock to the MMCIF hardware block */
+ __raw_writel(__raw_readl(MSTPCR2) & ~0x20000000, MSTPCR2);
+
+ /* setup pins D7-D0 */
+ __raw_writew(0x0000, PTWCR);
+
+ /* setup pins MMC_CLK, MMC_CMD */
+ __raw_writew(__raw_readw(PTXCR) & ~0x000f, PTXCR);
+
+ /* select D3-D0 pin function */
+ __raw_writew(__raw_readw(PSELA) & ~0x2000, PSELA);
+
+ /* select D7-D4 pin function */
+ __raw_writew(__raw_readw(PSELE) & ~0x3000, PSELE);
+
+ /* disable Hi-Z for the MMC pins */
+ __raw_writew(__raw_readw(HIZCRC) & ~0x0620, HIZCRC);
+
+ /* high drive capability for MMC pins */
+ __raw_writew(__raw_readw(DRVCRA) | 0x3000, DRVCRA);
+
+ mmcif_update_progress(MMCIF_PROGRESS_INIT);
+
+ /* setup MMCIF hardware */
+ sh_mmcif_boot_init(MMCIF_BASE);
+
+ mmcif_update_progress(MMCIF_PROGRESS_LOAD);
+
+ /* load kernel via MMCIF interface */
+ sh_mmcif_boot_slurp(MMCIF_BASE, buf, no_bytes);
+
+ /* disable clock to the MMCIF hardware block */
+ __raw_writel(__raw_readl(MSTPCR2) | 0x20000000, MSTPCR2);
+
+ mmcif_update_progress(MMCIF_PROGRESS_DONE);
+}
diff --git a/arch/sh/boot/romimage/vmlinux.scr b/arch/sh/boot/romimage/vmlinux.scr
index 287c08f..590394e 100644
--- a/arch/sh/boot/romimage/vmlinux.scr
+++ b/arch/sh/boot/romimage/vmlinux.scr
@@ -1,6 +1,8 @@
SECTIONS
{
.text : {
+ zero_page_pos = .;
*(.data)
+ end_data = .;
}
}
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 953af13..1e9598d 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -139,8 +139,6 @@
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
if (!dev->resource[i].start)
continue;
- if (dev->resource[i].flags & IORESOURCE_PCI_FIXED)
- continue;
if (dev->resource[i].flags & IORESOURCE_IO)
offset = hose->io_offset;
else if (dev->resource[i].flags & IORESOURCE_MEM)
diff --git a/arch/sh/include/asm/cache.h b/arch/sh/include/asm/cache.h
index e461d67..ef9e555 100644
--- a/arch/sh/include/asm/cache.h
+++ b/arch/sh/include/asm/cache.h
@@ -14,7 +14,7 @@
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
#ifndef __ASSEMBLY__
struct cache_info {
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index f689554..b237d52 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -39,6 +39,8 @@
#include <asm/io_generic.h>
#include <asm/io_trapped.h>
+#ifdef CONFIG_HAS_IOPORT
+
#define inb(p) sh_mv.mv_inb((p))
#define inw(p) sh_mv.mv_inw((p))
#define inl(p) sh_mv.mv_inl((p))
@@ -60,6 +62,8 @@
#define outsw(p,b,c) sh_mv.mv_outsw((p), (b), (c))
#define outsl(p,b,c) sh_mv.mv_outsl((p), (b), (c))
+#endif
+
#define __raw_writeb(v,a) (__chk_io_ptr(a), *(volatile u8 __force *)(a) = (v))
#define __raw_writew(v,a) (__chk_io_ptr(a), *(volatile u16 __force *)(a) = (v))
#define __raw_writel(v,a) (__chk_io_ptr(a), *(volatile u32 __force *)(a) = (v))
@@ -240,6 +244,8 @@
#define IO_SPACE_LIMIT 0xffffffff
+#ifdef CONFIG_HAS_IOPORT
+
/*
* This function provides a method for the generic case where a
* board-specific ioport_map simply needs to return the port + some
@@ -255,6 +261,8 @@
#define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n))
+#endif
+
/* We really want to try and get these to memcpy etc */
void memcpy_fromio(void *, const volatile void __iomem *, unsigned long);
void memcpy_toio(volatile void __iomem *, const void *, unsigned long);
diff --git a/arch/sh/include/asm/lmb.h b/arch/sh/include/asm/lmb.h
deleted file mode 100644
index 9b437f6..0000000
--- a/arch/sh/include/asm/lmb.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_LMB_H
-#define __ASM_SH_LMB_H
-
-#define LMB_REAL_LIMIT 0
-
-#endif /* __ASM_SH_LMB_H */
diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h
index bc0218c..a0b0cf7 100644
--- a/arch/sh/include/asm/machvec.h
+++ b/arch/sh/include/asm/machvec.h
@@ -19,6 +19,10 @@
const char *mv_name;
int mv_nr_irqs;
+ int (*mv_irq_demux)(int irq);
+ void (*mv_init_irq)(void);
+
+#ifdef CONFIG_HAS_IOPORT
u8 (*mv_inb)(unsigned long);
u16 (*mv_inw)(unsigned long);
u32 (*mv_inl)(unsigned long);
@@ -40,12 +44,9 @@
void (*mv_outsw)(unsigned long, const void *src, unsigned long count);
void (*mv_outsl)(unsigned long, const void *src, unsigned long count);
- int (*mv_irq_demux)(int irq);
-
- void (*mv_init_irq)(void);
-
void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
void (*mv_ioport_unmap)(void __iomem *);
+#endif
int (*mv_clk_init)(void);
int (*mv_mode_pins)(void);
diff --git a/arch/sh/include/asm/memblock.h b/arch/sh/include/asm/memblock.h
new file mode 100644
index 0000000..dfe683b
--- /dev/null
+++ b/arch/sh/include/asm/memblock.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_MEMBLOCK_H
+#define __ASM_SH_MEMBLOCK_H
+
+#define MEMBLOCK_REAL_LIMIT 0
+
+#endif /* __ASM_SH_MEMBLOCK_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h
index fbbf550..4c27b68 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7724.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h
@@ -9,6 +9,7 @@
* MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
* MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
* MD8: Test Mode
+ * BOOT: FBR - Boot Mode (L: MMCIF, H: Area0)
*/
/* Pin Function Controller:
diff --git a/arch/sh/include/mach-common/mach/romimage.h b/arch/sh/include/mach-common/mach/romimage.h
index 267e241..08fb422 100644
--- a/arch/sh/include/mach-common/mach/romimage.h
+++ b/arch/sh/include/mach-common/mach/romimage.h
@@ -1 +1,11 @@
+#ifdef __ASSEMBLY__
+
/* do nothing here by default */
+
+#else /* __ASSEMBLY__ */
+
+extern inline void mmcif_update_progress(int nr)
+{
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-ecovec24/mach/romimage.h b/arch/sh/include/mach-ecovec24/mach/romimage.h
index 1c8787e..1dcf5e6 100644
--- a/arch/sh/include/mach-ecovec24/mach/romimage.h
+++ b/arch/sh/include/mach-ecovec24/mach/romimage.h
@@ -1,3 +1,5 @@
+#ifdef __ASSEMBLY__
+
/* EcoVec board specific boot code:
* converts the "partner-jet-script.txt" script into assembly
* the assembly code is the first code to be executed in the romImage
@@ -18,3 +20,28 @@
.align 2
1 : .long 0xa8000000
2 :
+
+#else /* __ASSEMBLY__ */
+
+/* Ecovec board specific information:
+ *
+ * Set the following to enable MMCIF boot from the MMC card in CN12:
+ *
+ * DS1.5 = OFF (SH BOOT pin set to L)
+ * DS2.6 = OFF (Select MMCIF on CN12 instead of SDHI1)
+ * DS2.7 = ON (Select MMCIF on CN12 instead of SDHI1)
+ *
+ */
+#define HIZCRA 0xa4050158
+#define PGDR 0xa405012c
+
+extern inline void mmcif_update_progress(int nr)
+{
+ /* disable Hi-Z for LED pins */
+ __raw_writew(__raw_readw(HIZCRA) & ~(1 << 1), HIZCRA);
+
+ /* update progress on LED4, LED5, LED6 and LED7 */
+ __raw_writeb(1 << (nr - 1), PGDR);
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-kfr2r09/mach/romimage.h b/arch/sh/include/mach-kfr2r09/mach/romimage.h
index a110823..976256a 100644
--- a/arch/sh/include/mach-kfr2r09/mach/romimage.h
+++ b/arch/sh/include/mach-kfr2r09/mach/romimage.h
@@ -1,3 +1,5 @@
+#ifdef __ASSEMBLY__
+
/* kfr2r09 board specific boot code:
* converts the "partner-jet-script.txt" script into assembly
* the assembly code is the first code to be executed in the romImage
@@ -18,3 +20,11 @@
.align 2
1: .long 0xa8000000
2:
+
+#else /* __ASSEMBLY__ */
+
+extern inline void mmcif_update_progress(int nr)
+{
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 650b92f..e25f3c6 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -12,7 +12,7 @@
CFLAGS_REMOVE_return_address.o = -pg
obj-y := clkdev.o debugtraps.o dma-nommu.o dumpstack.o \
- idle.o io.o io_generic.o irq.o \
+ idle.o io.o irq.o \
irq_$(BITS).o machvec.o nmi_debug.o process.o \
process_$(BITS).o ptrace_$(BITS).o \
reboot.o return_address.o \
@@ -39,6 +39,7 @@
obj-$(CONFIG_HIBERNATION) += swsusp.o
obj-$(CONFIG_DWARF_UNWINDER) += dwarf.o
obj-$(CONFIG_PERF_EVENTS) += perf_event.o perf_callchain.o
+obj-$(CONFIG_HAS_IOPORT) += io_generic.o
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += localtimer.o
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 886d7d8..49c09c7 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -49,6 +49,8 @@
static struct dwarf_cie *cached_cie;
+static unsigned int dwarf_unwinder_ready;
+
/**
* dwarf_frame_alloc_reg - allocate memory for a DWARF register
* @frame: the DWARF frame whose list of registers we insert on
@@ -582,6 +584,13 @@
unsigned long addr;
/*
+ * If we've been called in to before initialization has
+ * completed, bail out immediately.
+ */
+ if (!dwarf_unwinder_ready)
+ return NULL;
+
+ /*
* If we're starting at the top of the stack we need get the
* contents of a physical register to get the CFA in order to
* begin the virtual unwinding of the stack.
@@ -1167,7 +1176,7 @@
*/
static int __init dwarf_unwinder_init(void)
{
- int err;
+ int err = -ENOMEM;
dwarf_frame_cachep = kmem_cache_create("dwarf_frames",
sizeof(struct dwarf_frame), 0,
@@ -1181,11 +1190,15 @@
mempool_alloc_slab,
mempool_free_slab,
dwarf_frame_cachep);
+ if (!dwarf_frame_pool)
+ goto out;
dwarf_reg_pool = mempool_create(DWARF_REG_MIN_REQ,
mempool_alloc_slab,
mempool_free_slab,
dwarf_reg_cachep);
+ if (!dwarf_reg_pool)
+ goto out;
err = dwarf_parse_section(__start_eh_frame, __stop_eh_frame, NULL);
if (err)
@@ -1195,11 +1208,13 @@
if (err)
goto out;
+ dwarf_unwinder_ready = 1;
+
return 0;
out:
printk(KERN_ERR "Failed to initialise DWARF unwinder: %d\n", err);
dwarf_unwinder_cleanup();
- return -EINVAL;
+ return err;
}
early_initcall(dwarf_unwinder_init);
diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c
index 4770c24..5c51b79 100644
--- a/arch/sh/kernel/io.c
+++ b/arch/sh/kernel/io.c
@@ -112,25 +112,3 @@
}
}
EXPORT_SYMBOL(memset_io);
-
-#ifndef CONFIG_GENERIC_IOMAP
-
-void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
- void __iomem *ret;
-
- ret = __ioport_map_trapped(port, nr);
- if (ret)
- return ret;
-
- return __ioport_map(port, nr);
-}
-EXPORT_SYMBOL(ioport_map);
-
-void ioport_unmap(void __iomem *addr)
-{
- sh_mv.mv_ioport_unmap(addr);
-}
-EXPORT_SYMBOL(ioport_unmap);
-
-#endif /* CONFIG_GENERIC_IOMAP */
diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c
index e1e1dbd..447d78f 100644
--- a/arch/sh/kernel/io_generic.c
+++ b/arch/sh/kernel/io_generic.c
@@ -158,3 +158,23 @@
void generic_ioport_unmap(void __iomem *addr)
{
}
+
+#ifndef CONFIG_GENERIC_IOMAP
+void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+ void __iomem *ret;
+
+ ret = __ioport_map_trapped(port, nr);
+ if (ret)
+ return ret;
+
+ return __ioport_map(port, nr);
+}
+EXPORT_SYMBOL(ioport_map);
+
+void ioport_unmap(void __iomem *addr)
+{
+ sh_mv.mv_ioport_unmap(addr);
+}
+EXPORT_SYMBOL(ioport_unmap);
+#endif /* CONFIG_GENERIC_IOMAP */
diff --git a/arch/sh/kernel/io_trapped.c b/arch/sh/kernel/io_trapped.c
index 4a8bb4e..2947d2b 100644
--- a/arch/sh/kernel/io_trapped.c
+++ b/arch/sh/kernel/io_trapped.c
@@ -91,10 +91,14 @@
tiop->magic = IO_TRAPPED_MAGIC;
INIT_LIST_HEAD(&tiop->list);
spin_lock_irq(&trapped_lock);
+#ifdef CONFIG_HAS_IOPORT
if (flags & IORESOURCE_IO)
list_add(&tiop->list, &trapped_io);
+#endif
+#ifdef CONFIG_HAS_IOMEM
if (flags & IORESOURCE_MEM)
list_add(&tiop->list, &trapped_mem);
+#endif
spin_unlock_irq(&trapped_lock);
return 0;
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 5a559e6..e2a3af3 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -15,7 +15,7 @@
#include <linux/numa.h>
#include <linux/ftrace.h>
#include <linux/suspend.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/mmu_context.h>
@@ -157,10 +157,10 @@
unsigned long long crash_size, crash_base;
int ret;
- /* this is necessary because of lmb_phys_mem_size() */
- lmb_analyze();
+ /* this is necessary because of memblock_phys_mem_size() */
+ memblock_analyze();
- ret = parse_crashkernel(boot_command_line, lmb_phys_mem_size(),
+ ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
&crash_size, &crash_base);
if (ret == 0 && crash_size > 0) {
crashk_res.start = crash_base;
@@ -172,14 +172,14 @@
crash_size = PAGE_ALIGN(crashk_res.end - crashk_res.start + 1);
if (!crashk_res.start) {
- unsigned long max = lmb_end_of_DRAM() - memory_limit;
- crashk_res.start = __lmb_alloc_base(crash_size, PAGE_SIZE, max);
+ unsigned long max = memblock_end_of_DRAM() - memory_limit;
+ crashk_res.start = __memblock_alloc_base(crash_size, PAGE_SIZE, max);
if (!crashk_res.start) {
pr_err("crashkernel allocation failed\n");
goto disable;
}
} else {
- ret = lmb_reserve(crashk_res.start, crash_size);
+ ret = memblock_reserve(crashk_res.start, crash_size);
if (unlikely(ret < 0)) {
pr_err("crashkernel reservation failed - "
"memory is in use\n");
@@ -192,7 +192,7 @@
/*
* Crash kernel trumps memory limit
*/
- if ((lmb_end_of_DRAM() - memory_limit) <= crashk_res.end) {
+ if ((memblock_end_of_DRAM() - memory_limit) <= crashk_res.end) {
memory_limit = 0;
pr_info("Disabled memory limit for crashkernel\n");
}
@@ -201,7 +201,7 @@
"for crashkernel (System RAM: %ldMB)\n",
(unsigned long)(crash_size >> 20),
(unsigned long)(crashk_res.start),
- (unsigned long)(lmb_phys_mem_size() >> 20));
+ (unsigned long)(memblock_phys_mem_size() >> 20));
return;
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
index 85cfaf9..9f9bb63 100644
--- a/arch/sh/kernel/machvec.c
+++ b/arch/sh/kernel/machvec.c
@@ -118,6 +118,14 @@
sh_mv.mv_##elem = generic_##elem; \
} while (0)
+#ifdef CONFIG_HAS_IOPORT
+
+#ifdef P2SEG
+ __set_io_port_base(P2SEG);
+#else
+ __set_io_port_base(0);
+#endif
+
mv_set(inb); mv_set(inw); mv_set(inl);
mv_set(outb); mv_set(outw); mv_set(outl);
@@ -129,16 +137,13 @@
mv_set(ioport_map);
mv_set(ioport_unmap);
+
+#endif
+
mv_set(irq_demux);
mv_set(mode_pins);
mv_set(mem_init);
if (!sh_mv.mv_nr_irqs)
sh_mv.mv_nr_irqs = NR_IRQS;
-
-#ifdef P2SEG
- __set_io_port_base(P2SEG);
-#else
- __set_io_port_base(0);
-#endif
}
diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
index d4104ce..6c4bbba 100644
--- a/arch/sh/kernel/ptrace_32.c
+++ b/arch/sh/kernel/ptrace_32.c
@@ -436,29 +436,6 @@
0, sizeof(struct pt_dspregs),
(const void __user *)data);
#endif
-#ifdef CONFIG_BINFMT_ELF_FDPIC
- case PTRACE_GETFDPIC: {
- unsigned long tmp = 0;
-
- switch (addr) {
- case PTRACE_GETFDPIC_EXEC:
- tmp = child->mm->context.exec_fdpic_loadmap;
- break;
- case PTRACE_GETFDPIC_INTERP:
- tmp = child->mm->context.interp_fdpic_loadmap;
- break;
- default:
- break;
- }
-
- ret = 0;
- if (put_user(tmp, datap)) {
- ret = -EFAULT;
- break;
- }
- break;
- }
-#endif
default:
ret = ptrace_request(child, request, addr, data);
break;
diff --git a/arch/sh/kernel/return_address.c b/arch/sh/kernel/return_address.c
index cbf1dd5..5124aeb 100644
--- a/arch/sh/kernel/return_address.c
+++ b/arch/sh/kernel/return_address.c
@@ -24,6 +24,8 @@
struct dwarf_frame *tmp;
tmp = dwarf_unwind_stack(ra, frame);
+ if (!tmp)
+ return NULL;
if (frame)
dwarf_free_frame(frame);
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 2727346..e769401 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -30,7 +30,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/page.h>
@@ -141,10 +141,10 @@
goto disable;
}
- if (unlikely(end > lmb_end_of_DRAM())) {
+ if (unlikely(end > memblock_end_of_DRAM())) {
pr_err("initrd extends beyond end of memory "
"(0x%08lx > 0x%08lx)\ndisabling initrd\n",
- end, (unsigned long)lmb_end_of_DRAM());
+ end, (unsigned long)memblock_end_of_DRAM());
goto disable;
}
@@ -161,7 +161,7 @@
initrd_start = (unsigned long)__va(__pa(start));
initrd_end = initrd_start + INITRD_SIZE;
- lmb_reserve(__pa(initrd_start), INITRD_SIZE);
+ memblock_reserve(__pa(initrd_start), INITRD_SIZE);
return;
diff --git a/arch/sh/math-emu/sfp-util.h b/arch/sh/math-emu/sfp-util.h
index e852602..8ae1bd3 100644
--- a/arch/sh/math-emu/sfp-util.h
+++ b/arch/sh/math-emu/sfp-util.h
@@ -66,3 +66,7 @@
} while (0)
#define abort() return 0
+
+#define __BYTE_ORDER __LITTLE_ENDIAN
+
+
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 46f84de..d0e2491 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -16,7 +16,7 @@
#include <linux/pagemap.h>
#include <linux/percpu.h>
#include <linux/io.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <linux/dma-mapping.h>
#include <asm/mmu_context.h>
#include <asm/mmzone.h>
@@ -33,7 +33,7 @@
void __init generic_mem_init(void)
{
- lmb_add(__MEMORY_START, __MEMORY_SIZE);
+ memblock_add(__MEMORY_START, __MEMORY_SIZE);
}
void __init __weak plat_mem_setup(void)
@@ -176,12 +176,12 @@
get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
#ifdef CONFIG_NEED_MULTIPLE_NODES
- phys = __lmb_alloc_base(sizeof(struct pglist_data),
+ phys = __memblock_alloc_base(sizeof(struct pglist_data),
SMP_CACHE_BYTES, end_pfn << PAGE_SHIFT);
/* Retry with all of system memory */
if (!phys)
- phys = __lmb_alloc_base(sizeof(struct pglist_data),
- SMP_CACHE_BYTES, lmb_end_of_DRAM());
+ phys = __memblock_alloc_base(sizeof(struct pglist_data),
+ SMP_CACHE_BYTES, memblock_end_of_DRAM());
if (!phys)
panic("Can't allocate pgdat for node %d\n", nid);
@@ -212,7 +212,7 @@
total_pages = bootmem_bootmap_pages(p->node_spanned_pages);
- paddr = lmb_alloc(total_pages << PAGE_SHIFT, PAGE_SIZE);
+ paddr = memblock_alloc(total_pages << PAGE_SHIFT, PAGE_SIZE);
if (!paddr)
panic("Can't allocate bootmap for nid[%d]\n", nid);
@@ -227,9 +227,9 @@
*/
if (nid == 0) {
/* Reserve the sections we're already using. */
- for (i = 0; i < lmb.reserved.cnt; i++)
- reserve_bootmem(lmb.reserved.region[i].base,
- lmb_size_bytes(&lmb.reserved, i),
+ for (i = 0; i < memblock.reserved.cnt; i++)
+ reserve_bootmem(memblock.reserved.region[i].base,
+ memblock_size_bytes(&memblock.reserved, i),
BOOTMEM_DEFAULT);
}
@@ -241,10 +241,10 @@
int i;
/* Add active regions with valid PFNs. */
- for (i = 0; i < lmb.memory.cnt; i++) {
+ for (i = 0; i < memblock.memory.cnt; i++) {
unsigned long start_pfn, end_pfn;
- start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
- end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+ start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT;
+ end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i);
__add_active_range(0, start_pfn, end_pfn);
}
@@ -276,7 +276,7 @@
* this catches the (definitely buggy) case of us accidentally
* initializing the bootmem allocator with an invalid RAM area.
*/
- lmb_reserve(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET,
+ memblock_reserve(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET,
(PFN_PHYS(start_pfn) + PAGE_SIZE - 1) -
(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET));
@@ -284,7 +284,7 @@
* Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
*/
if (CONFIG_ZERO_PAGE_OFFSET != 0)
- lmb_reserve(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET);
+ memblock_reserve(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET);
/*
* Handle additional early reservations
@@ -299,27 +299,27 @@
unsigned long vaddr, end;
int nid;
- lmb_init();
+ memblock_init();
sh_mv.mv_mem_init();
early_reserve_mem();
- lmb_enforce_memory_limit(memory_limit);
- lmb_analyze();
+ memblock_enforce_memory_limit(memory_limit);
+ memblock_analyze();
- lmb_dump_all();
+ memblock_dump_all();
/*
* Determine low and high memory ranges:
*/
- max_low_pfn = max_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
+ max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
min_low_pfn = __MEMORY_START >> PAGE_SHIFT;
nodes_clear(node_online_map);
memory_start = (unsigned long)__va(__MEMORY_START);
- memory_end = memory_start + (memory_limit ?: lmb_phys_mem_size());
+ memory_end = memory_start + (memory_limit ?: memblock_phys_mem_size());
uncached_init();
pmb_init();
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
index a2e645f..3d85225 100644
--- a/arch/sh/mm/numa.c
+++ b/arch/sh/mm/numa.c
@@ -9,7 +9,7 @@
*/
#include <linux/module.h>
#include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <linux/mm.h>
#include <linux/numa.h>
#include <linux/pfn.h>
@@ -39,12 +39,12 @@
pmb_bolt_mapping((unsigned long)__va(start), start, end - start,
PAGE_KERNEL);
- lmb_add(start, end - start);
+ memblock_add(start, end - start);
__add_active_range(nid, start_pfn, end_pfn);
/* Node-local pgdat */
- NODE_DATA(nid) = __va(lmb_alloc_base(sizeof(struct pglist_data),
+ NODE_DATA(nid) = __va(memblock_alloc_base(sizeof(struct pglist_data),
SMP_CACHE_BYTES, end));
memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
@@ -54,7 +54,7 @@
/* Node-local bootmap */
bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
- bootmem_paddr = lmb_alloc_base(bootmap_pages << PAGE_SHIFT,
+ bootmem_paddr = memblock_alloc_base(bootmap_pages << PAGE_SHIFT,
PAGE_SIZE, end);
init_bootmem_node(NODE_DATA(nid), bootmem_paddr >> PAGE_SHIFT,
start_pfn, end_pfn);
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index 18623ba..6379091 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -770,7 +770,7 @@
spin_unlock_irqrestore(&pmbe->lock, flags);
}
- read_lock(&pmb_rwlock);
+ read_unlock(&pmb_rwlock);
}
#endif
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index d6781ce..c0015db 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -42,7 +42,7 @@
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
select HAVE_KRETPROBES
select HAVE_KPROBES
- select HAVE_LMB
+ select HAVE_MEMBLOCK
select HAVE_SYSCALL_WRAPPERS
select HAVE_DYNAMIC_FTRACE
select HAVE_FTRACE_MCOUNT_RECORD
@@ -133,6 +133,9 @@
config NEED_DMA_MAP_STATE
def_bool y
+config NEED_SG_DMA_LENGTH
+ def_bool y
+
config GENERIC_ISA_DMA
bool
default y if SPARC32
diff --git a/arch/sparc/boot/btfixupprep.c b/arch/sparc/boot/btfixupprep.c
index bbf91b9..e7f2940 100644
--- a/arch/sparc/boot/btfixupprep.c
+++ b/arch/sparc/boot/btfixupprep.c
@@ -325,7 +325,7 @@
(*rr)->next = NULL;
}
printf("! Generated by btfixupprep. Do not edit.\n\n");
- printf("\t.section\t\".data.init\",#alloc,#write\n\t.align\t4\n\n");
+ printf("\t.section\t\".data..init\",#alloc,#write\n\t.align\t4\n\n");
printf("\t.global\t___btfixup_start\n___btfixup_start:\n\n");
for (i = 0; i < last; i++) {
f = array + i;
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index 259e3fd..1dc07a0 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc3
-# Sat Apr 3 15:49:56 2010
+# Linux kernel version: 2.6.34
+# Wed May 26 21:14:01 2010
#
CONFIG_64BIT=y
CONFIG_SPARC=y
@@ -107,10 +107,9 @@
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
@@ -239,6 +238,7 @@
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_COMPACTION is not set
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
@@ -351,6 +351,7 @@
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
@@ -367,6 +368,7 @@
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
+CONFIG_RPS=y
#
# Network testing
@@ -386,9 +388,14 @@
#
# CFG80211 needs to be enabled for MAC80211
#
+
+#
+# Some wireless drivers require a rate control algorithm
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
#
# Device Drivers
@@ -658,6 +665,7 @@
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
@@ -734,6 +742,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
@@ -766,6 +776,7 @@
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -778,7 +789,6 @@
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
@@ -816,6 +826,7 @@
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
CONFIG_KEYBOARD_LKKBD=m
+# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
@@ -840,6 +851,7 @@
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
CONFIG_INPUT_SPARCSPKR=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
@@ -848,6 +860,7 @@
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
#
# Hardware I/O ports
@@ -871,6 +884,7 @@
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
#
@@ -893,6 +907,8 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -1306,11 +1322,14 @@
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
+# CONFIG_HID_CANDO is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
+# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EGALAX is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
@@ -1328,7 +1347,9 @@
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT_KONE is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
# CONFIG_HID_STANTUM is not set
@@ -1342,6 +1363,7 @@
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1356,7 +1378,6 @@
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
@@ -1521,10 +1542,6 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
# CONFIG_STAGING is not set
#
@@ -1706,8 +1723,8 @@
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1742,6 +1759,9 @@
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
@@ -1769,12 +1789,12 @@
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_DCFLUSH is not set
-# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
@@ -1895,6 +1915,7 @@
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_NIAGARA2 is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_BINARY_PRINTF=y
diff --git a/arch/sparc/include/asm/cache.h b/arch/sparc/include/asm/cache.h
index 78b0700..69358b5 100644
--- a/arch/sparc/include/asm/cache.h
+++ b/arch/sparc/include/asm/cache.h
@@ -11,7 +11,6 @@
#define L1_CACHE_SHIFT 5
#define L1_CACHE_BYTES 32
-#define L1_CACHE_ALIGN(x) ((((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1)))
#ifdef CONFIG_SPARC32
#define SMP_CACHE_BYTES_SHIFT 5
@@ -21,7 +20,7 @@
#define SMP_CACHE_BYTES (1 << SMP_CACHE_BYTES_SHIFT)
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
#ifdef CONFIG_SPARC32
#include <asm/asi.h>
diff --git a/arch/sparc/include/asm/lmb.h b/arch/sparc/include/asm/lmb.h
deleted file mode 100644
index 6a352cb..0000000
--- a/arch/sparc/include/asm/lmb.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _SPARC64_LMB_H
-#define _SPARC64_LMB_H
-
-#include <asm/oplib.h>
-
-#define LMB_DBG(fmt...) prom_printf(fmt)
-
-#define LMB_REAL_LIMIT 0
-
-#endif /* !(_SPARC64_LMB_H) */
diff --git a/arch/sparc/include/asm/memblock.h b/arch/sparc/include/asm/memblock.h
new file mode 100644
index 0000000..f12af88
--- /dev/null
+++ b/arch/sparc/include/asm/memblock.h
@@ -0,0 +1,10 @@
+#ifndef _SPARC64_MEMBLOCK_H
+#define _SPARC64_MEMBLOCK_H
+
+#include <asm/oplib.h>
+
+#define MEMBLOCK_DBG(fmt...) prom_printf(fmt)
+
+#define MEMBLOCK_REAL_LIMIT 0
+
+#endif /* !(_SPARC64_MEMBLOCK_H) */
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
index 77f906d..0ece77f 100644
--- a/arch/sparc/include/asm/pgtable_32.h
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -142,13 +142,12 @@
#define pmd_page(pmd) BTFIXUP_CALL(pmd_page)(pmd)
#define pgd_page_vaddr(pgd) BTFIXUP_CALL(pgd_page_vaddr)(pgd)
-BTFIXUPDEF_SETHI(none_mask)
BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t)
BTFIXUPDEF_CALL(void, pte_clear, pte_t *)
static inline int pte_none(pte_t pte)
{
- return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask));
+ return !pte_val(pte);
}
#define pte_present(pte) BTFIXUP_CALL(pte_present)(pte)
@@ -160,7 +159,7 @@
static inline int pmd_none(pmd_t pmd)
{
- return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask));
+ return !pmd_val(pmd);
}
#define pmd_bad(pmd) BTFIXUP_CALL(pmd_bad)(pmd)
diff --git a/arch/sparc/include/asm/scatterlist.h b/arch/sparc/include/asm/scatterlist.h
index d112025..433e45f 100644
--- a/arch/sparc/include/asm/scatterlist.h
+++ b/arch/sparc/include/asm/scatterlist.h
@@ -1,8 +1,9 @@
#ifndef _SPARC_SCATTERLIST_H
#define _SPARC_SCATTERLIST_H
-#define sg_dma_len(sg) ((sg)->dma_length)
-
#include <asm-generic/scatterlist.h>
+#define ISA_DMA_THRESHOLD (~0UL)
+#define ARCH_HAS_SG_CHAIN
+
#endif /* !(_SPARC_SCATTERLIST_H) */
diff --git a/arch/sparc/kernel/mdesc.c b/arch/sparc/kernel/mdesc.c
index cdc91d9..83e85c2 100644
--- a/arch/sparc/kernel/mdesc.c
+++ b/arch/sparc/kernel/mdesc.c
@@ -4,7 +4,7 @@
*/
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <linux/log2.h>
#include <linux/list.h>
#include <linux/slab.h>
@@ -86,7 +86,7 @@
hp->handle_size = handle_size;
}
-static struct mdesc_handle * __init mdesc_lmb_alloc(unsigned int mdesc_size)
+static struct mdesc_handle * __init mdesc_memblock_alloc(unsigned int mdesc_size)
{
unsigned int handle_size, alloc_size;
struct mdesc_handle *hp;
@@ -97,7 +97,7 @@
mdesc_size);
alloc_size = PAGE_ALIGN(handle_size);
- paddr = lmb_alloc(alloc_size, PAGE_SIZE);
+ paddr = memblock_alloc(alloc_size, PAGE_SIZE);
hp = NULL;
if (paddr) {
@@ -107,7 +107,7 @@
return hp;
}
-static void mdesc_lmb_free(struct mdesc_handle *hp)
+static void mdesc_memblock_free(struct mdesc_handle *hp)
{
unsigned int alloc_size;
unsigned long start;
@@ -120,9 +120,9 @@
free_bootmem_late(start, alloc_size);
}
-static struct mdesc_mem_ops lmb_mdesc_ops = {
- .alloc = mdesc_lmb_alloc,
- .free = mdesc_lmb_free,
+static struct mdesc_mem_ops memblock_mdesc_ops = {
+ .alloc = mdesc_memblock_alloc,
+ .free = mdesc_memblock_free,
};
static struct mdesc_handle *mdesc_kmalloc(unsigned int mdesc_size)
@@ -914,7 +914,7 @@
printk("MDESC: Size is %lu bytes.\n", len);
- hp = mdesc_alloc(len, &lmb_mdesc_ops);
+ hp = mdesc_alloc(len, &memblock_mdesc_ops);
if (hp == NULL) {
prom_printf("MDESC: alloc of %lu bytes failed.\n", len);
prom_halt();
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index 34ce49f..44faabc 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -92,6 +92,8 @@
/* Enabled/disable state. */
int enabled;
+
+ unsigned int group_flag;
};
DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { .enabled = 1, };
@@ -655,6 +657,7 @@
cpuc->current_idx[i] = idx;
enc = perf_event_get_enc(cpuc->events[i]);
+ pcr &= ~mask_for_index(idx);
pcr |= event_encoding(enc, idx);
}
out:
@@ -981,53 +984,6 @@
return n;
}
-static void event_sched_in(struct perf_event *event)
-{
- event->state = PERF_EVENT_STATE_ACTIVE;
- event->oncpu = smp_processor_id();
- event->tstamp_running += event->ctx->time - event->tstamp_stopped;
- if (is_software_event(event))
- event->pmu->enable(event);
-}
-
-int hw_perf_group_sched_in(struct perf_event *group_leader,
- struct perf_cpu_context *cpuctx,
- struct perf_event_context *ctx)
-{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- struct perf_event *sub;
- int n0, n;
-
- if (!sparc_pmu)
- return 0;
-
- n0 = cpuc->n_events;
- n = collect_events(group_leader, perf_max_events - n0,
- &cpuc->event[n0], &cpuc->events[n0],
- &cpuc->current_idx[n0]);
- if (n < 0)
- return -EAGAIN;
- if (check_excludes(cpuc->event, n0, n))
- return -EINVAL;
- if (sparc_check_constraints(cpuc->event, cpuc->events, n + n0))
- return -EAGAIN;
- cpuc->n_events = n0 + n;
- cpuc->n_added += n;
-
- cpuctx->active_oncpu += n;
- n = 1;
- event_sched_in(group_leader);
- list_for_each_entry(sub, &group_leader->sibling_list, group_entry) {
- if (sub->state != PERF_EVENT_STATE_OFF) {
- event_sched_in(sub);
- n++;
- }
- }
- ctx->nr_active += n;
-
- return 1;
-}
-
static int sparc_pmu_enable(struct perf_event *event)
{
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
@@ -1045,11 +1001,20 @@
cpuc->events[n0] = event->hw.event_base;
cpuc->current_idx[n0] = PIC_NO_INDEX;
+ /*
+ * If group events scheduling transaction was started,
+ * skip the schedulability test here, it will be peformed
+ * at commit time(->commit_txn) as a whole
+ */
+ if (cpuc->group_flag & PERF_EVENT_TXN_STARTED)
+ goto nocheck;
+
if (check_excludes(cpuc->event, n0, 1))
goto out;
if (sparc_check_constraints(cpuc->event, cpuc->events, n0 + 1))
goto out;
+nocheck:
cpuc->n_events++;
cpuc->n_added++;
@@ -1129,11 +1094,61 @@
return 0;
}
+/*
+ * Start group events scheduling transaction
+ * Set the flag to make pmu::enable() not perform the
+ * schedulability test, it will be performed at commit time
+ */
+static void sparc_pmu_start_txn(const struct pmu *pmu)
+{
+ struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
+
+ cpuhw->group_flag |= PERF_EVENT_TXN_STARTED;
+}
+
+/*
+ * Stop group events scheduling transaction
+ * Clear the flag and pmu::enable() will perform the
+ * schedulability test.
+ */
+static void sparc_pmu_cancel_txn(const struct pmu *pmu)
+{
+ struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
+
+ cpuhw->group_flag &= ~PERF_EVENT_TXN_STARTED;
+}
+
+/*
+ * Commit group events scheduling transaction
+ * Perform the group schedulability test as a whole
+ * Return 0 if success
+ */
+static int sparc_pmu_commit_txn(const struct pmu *pmu)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ int n;
+
+ if (!sparc_pmu)
+ return -EINVAL;
+
+ cpuc = &__get_cpu_var(cpu_hw_events);
+ n = cpuc->n_events;
+ if (check_excludes(cpuc->event, 0, n))
+ return -EINVAL;
+ if (sparc_check_constraints(cpuc->event, cpuc->events, n))
+ return -EAGAIN;
+
+ return 0;
+}
+
static const struct pmu pmu = {
.enable = sparc_pmu_enable,
.disable = sparc_pmu_disable,
.read = sparc_pmu_read,
.unthrottle = sparc_pmu_unthrottle,
+ .start_txn = sparc_pmu_start_txn,
+ .cancel_txn = sparc_pmu_cancel_txn,
+ .commit_txn = sparc_pmu_commit_txn,
};
const struct pmu *hw_perf_event_init(struct perf_event *event)
diff --git a/arch/sparc/kernel/prom_64.c b/arch/sparc/kernel/prom_64.c
index fb06ac2..466a327 100644
--- a/arch/sparc/kernel/prom_64.c
+++ b/arch/sparc/kernel/prom_64.c
@@ -20,7 +20,7 @@
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/module.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <linux/of_device.h>
#include <asm/prom.h>
@@ -34,7 +34,7 @@
void * __init prom_early_alloc(unsigned long size)
{
- unsigned long paddr = lmb_alloc(size, SMP_CACHE_BYTES);
+ unsigned long paddr = memblock_alloc(size, SMP_CACHE_BYTES);
void *ret;
if (!paddr) {
diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c
index ab036a7..e11b461 100644
--- a/arch/sparc/kernel/sun4d_irq.c
+++ b/arch/sparc/kernel/sun4d_irq.c
@@ -183,7 +183,7 @@
goto out_unlock;
}
- if (action && tmp)
+ if (tmp)
tmp->next = action->next;
else
*actionp = action->next;
diff --git a/arch/sparc/kernel/ttable.S b/arch/sparc/kernel/ttable.S
index 76d837f..c6dfdaa 100644
--- a/arch/sparc/kernel/ttable.S
+++ b/arch/sparc/kernel/ttable.S
@@ -64,7 +64,7 @@
tl0_irq6: BTRAP(0x46)
#endif
tl0_irq7: TRAP_IRQ(deferred_pcr_work_irq, 7)
-#ifdef CONFIG_KGDB
+#if defined(CONFIG_KGDB) && defined(CONFIG_SMP)
tl0_irq8: TRAP_IRQ(smp_kgdb_capture_client, 8)
#else
tl0_irq8: BTRAP(0x48)
diff --git a/arch/sparc/math-emu/sfp-util_32.h b/arch/sparc/math-emu/sfp-util_32.h
index 0ea35af..d1b2aff 100644
--- a/arch/sparc/math-emu/sfp-util_32.h
+++ b/arch/sparc/math-emu/sfp-util_32.h
@@ -107,3 +107,9 @@
#define abort() \
return 0
+
+#ifdef __BIG_ENDIAN
+#define __BYTE_ORDER __BIG_ENDIAN
+#else
+#define __BYTE_ORDER __LITTLE_ENDIAN
+#endif
diff --git a/arch/sparc/math-emu/sfp-util_64.h b/arch/sparc/math-emu/sfp-util_64.h
index d17c9bc..425d3cf 100644
--- a/arch/sparc/math-emu/sfp-util_64.h
+++ b/arch/sparc/math-emu/sfp-util_64.h
@@ -112,3 +112,9 @@
#define abort() \
return 0
+
+#ifdef __BIG_ENDIAN
+#define __BYTE_ORDER __BIG_ENDIAN
+#else
+#define __BYTE_ORDER __LITTLE_ENDIAN
+#endif
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index b2831dc..f043451 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -23,7 +23,7 @@
#include <linux/cache.h>
#include <linux/sort.h>
#include <linux/percpu.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
#include <linux/mmzone.h>
#include <linux/gfp.h>
@@ -726,7 +726,7 @@
initrd_start = ramdisk_image;
initrd_end = ramdisk_image + sparc_ramdisk_size;
- lmb_reserve(initrd_start, sparc_ramdisk_size);
+ memblock_reserve(initrd_start, sparc_ramdisk_size);
initrd_start += PAGE_OFFSET;
initrd_end += PAGE_OFFSET;
@@ -822,7 +822,7 @@
struct pglist_data *p;
#ifdef CONFIG_NEED_MULTIPLE_NODES
- paddr = lmb_alloc_nid(sizeof(struct pglist_data),
+ paddr = memblock_alloc_nid(sizeof(struct pglist_data),
SMP_CACHE_BYTES, nid, nid_range);
if (!paddr) {
prom_printf("Cannot allocate pglist_data for nid[%d]\n", nid);
@@ -843,7 +843,7 @@
if (p->node_spanned_pages) {
num_pages = bootmem_bootmap_pages(p->node_spanned_pages);
- paddr = lmb_alloc_nid(num_pages << PAGE_SHIFT, PAGE_SIZE, nid,
+ paddr = memblock_alloc_nid(num_pages << PAGE_SHIFT, PAGE_SIZE, nid,
nid_range);
if (!paddr) {
prom_printf("Cannot allocate bootmap for nid[%d]\n",
@@ -974,11 +974,11 @@
{
int i;
- for (i = 0; i < lmb.memory.cnt; i++) {
- unsigned long size = lmb_size_bytes(&lmb.memory, i);
+ for (i = 0; i < memblock.memory.cnt; i++) {
+ unsigned long size = memblock_size_bytes(&memblock.memory, i);
unsigned long start, end;
- start = lmb.memory.region[i].base;
+ start = memblock.memory.region[i].base;
end = start + size;
while (start < end) {
unsigned long this_end;
@@ -1010,7 +1010,7 @@
if (!count)
return -ENOENT;
- paddr = lmb_alloc(count * sizeof(struct mdesc_mlgroup),
+ paddr = memblock_alloc(count * sizeof(struct mdesc_mlgroup),
SMP_CACHE_BYTES);
if (!paddr)
return -ENOMEM;
@@ -1051,7 +1051,7 @@
if (!count)
return -ENOENT;
- paddr = lmb_alloc(count * sizeof(struct mdesc_mblock),
+ paddr = memblock_alloc(count * sizeof(struct mdesc_mblock),
SMP_CACHE_BYTES);
if (!paddr)
return -ENOMEM;
@@ -1279,8 +1279,8 @@
static void __init bootmem_init_nonnuma(void)
{
- unsigned long top_of_ram = lmb_end_of_DRAM();
- unsigned long total_ram = lmb_phys_mem_size();
+ unsigned long top_of_ram = memblock_end_of_DRAM();
+ unsigned long total_ram = memblock_phys_mem_size();
unsigned int i;
numadbg("bootmem_init_nonnuma()\n");
@@ -1292,15 +1292,15 @@
init_node_masks_nonnuma();
- for (i = 0; i < lmb.memory.cnt; i++) {
- unsigned long size = lmb_size_bytes(&lmb.memory, i);
+ for (i = 0; i < memblock.memory.cnt; i++) {
+ unsigned long size = memblock_size_bytes(&memblock.memory, i);
unsigned long start_pfn, end_pfn;
if (!size)
continue;
- start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
- end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+ start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT;
+ end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i);
add_active_range(0, start_pfn, end_pfn);
}
@@ -1338,9 +1338,9 @@
numadbg(" trim_reserved_in_node(%d)\n", nid);
- for (i = 0; i < lmb.reserved.cnt; i++) {
- unsigned long start = lmb.reserved.region[i].base;
- unsigned long size = lmb_size_bytes(&lmb.reserved, i);
+ for (i = 0; i < memblock.reserved.cnt; i++) {
+ unsigned long start = memblock.reserved.region[i].base;
+ unsigned long size = memblock_size_bytes(&memblock.reserved, i);
unsigned long end = start + size;
reserve_range_in_node(nid, start, end);
@@ -1384,7 +1384,7 @@
unsigned long end_pfn;
int nid;
- end_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
+ end_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
max_pfn = max_low_pfn = end_pfn;
min_low_pfn = (phys_base >> PAGE_SHIFT);
@@ -1734,7 +1734,7 @@
sun4v_ktsb_init();
}
- lmb_init();
+ memblock_init();
/* Find available physical memory...
*
@@ -1752,17 +1752,17 @@
phys_base = 0xffffffffffffffffUL;
for (i = 0; i < pavail_ents; i++) {
phys_base = min(phys_base, pavail[i].phys_addr);
- lmb_add(pavail[i].phys_addr, pavail[i].reg_size);
+ memblock_add(pavail[i].phys_addr, pavail[i].reg_size);
}
- lmb_reserve(kern_base, kern_size);
+ memblock_reserve(kern_base, kern_size);
find_ramdisk(phys_base);
- lmb_enforce_memory_limit(cmdline_memory_size);
+ memblock_enforce_memory_limit(cmdline_memory_size);
- lmb_analyze();
- lmb_dump_all();
+ memblock_analyze();
+ memblock_dump_all();
set_bit(0, mmu_context_bmap);
@@ -1816,8 +1816,8 @@
*/
for_each_possible_cpu(i) {
/* XXX Use node local allocations... XXX */
- softirq_stack[i] = __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
- hardirq_stack[i] = __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+ softirq_stack[i] = __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
+ hardirq_stack[i] = __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
}
/* Setup bootmem... */
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index f5f75a5..b0b43aa 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -2215,8 +2215,6 @@
BTFIXUPSET_CALL(pmd_page, srmmu_pmd_page, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(pgd_page_vaddr, srmmu_pgd_page, BTFIXUPCALL_NORM);
- BTFIXUPSET_SETHI(none_mask, 0xF0000000);
-
BTFIXUPSET_CALL(pte_present, srmmu_pte_present, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(pte_clear, srmmu_pte_clear, BTFIXUPCALL_SWAPO0G0);
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index cf38846..4289f90 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -2087,9 +2087,6 @@
BTFIXUPSET_CALL(set_pte, sun4c_set_pte, BTFIXUPCALL_STO1O0);
- /* The 2.4.18 code does not set this on sun4c, how does it work? XXX */
- /* BTFIXUPSET_SETHI(none_mask, 0x00000000); */ /* Defaults to zero? */
-
BTFIXUPSET_CALL(pte_pfn, sun4c_pte_pfn, BTFIXUPCALL_NORM);
#if 0 /* PAGE_SHIFT <= 12 */ /* Eek. Investigate. XXX */
BTFIXUPSET_CALL(pmd_page, sun4c_pmd_page, BTFIXUPCALL_ANDNINT(PAGE_SIZE - 1));
diff --git a/arch/um/include/asm/arch_hweight.h b/arch/um/include/asm/arch_hweight.h
new file mode 100644
index 0000000..c656cf4
--- /dev/null
+++ b/arch/um/include/asm/arch_hweight.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_UM_HWEIGHT_H
+#define _ASM_UM_HWEIGHT_H
+
+#include <asm-generic/bitops/arch_hweight.h>
+
+#endif
diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
index 7fcad58..6926801 100644
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -94,7 +94,7 @@
.data : {
INIT_TASK_DATA(KERNEL_STACK_SIZE)
. = ALIGN(KERNEL_STACK_SIZE);
- *(.data.init_irqstack)
+ *(.data..init_irqstack)
DATA_DATA
*(.data.* .gnu.linkonce.d.*)
SORT(CONSTRUCTORS)
diff --git a/arch/um/kernel/init_task.c b/arch/um/kernel/init_task.c
index 8aa77b6..ddc9698 100644
--- a/arch/um/kernel/init_task.c
+++ b/arch/um/kernel/init_task.c
@@ -34,5 +34,5 @@
{ INIT_THREAD_INFO(init_task) };
union thread_union cpu0_irqstack
- __attribute__((__section__(".data.init_irqstack"))) =
+ __attribute__((__section__(".data..init_irqstack"))) =
{ INIT_THREAD_INFO(init_task) };
diff --git a/arch/um/kernel/skas/uaccess.c b/arch/um/kernel/skas/uaccess.c
index e22c969..6966342 100644
--- a/arch/um/kernel/skas/uaccess.c
+++ b/arch/um/kernel/skas/uaccess.c
@@ -81,7 +81,7 @@
current->thread.fault_catcher = NULL;
- kunmap_atomic(page, KM_UML_USERCOPY);
+ kunmap_atomic((void *)addr, KM_UML_USERCOPY);
return n;
}
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index e7a6cca..ec63785 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -50,7 +50,7 @@
{
INIT_TASK_DATA(KERNEL_STACK_SIZE)
. = ALIGN(KERNEL_STACK_SIZE);
- *(.data.init_irqstack)
+ *(.data..init_irqstack)
DATA_DATA
*(.gnu.linkonce.d*)
CONSTRUCTORS
diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c
index 93a11d7..e696144 100644
--- a/arch/um/os-Linux/mem.c
+++ b/arch/um/os-Linux/mem.c
@@ -10,6 +10,7 @@
#include <errno.h>
#include <fcntl.h>
#include <string.h>
+#include <sys/stat.h>
#include <sys/mman.h>
#include <sys/param.h>
#include "init.h"
diff --git a/arch/x86/.gitignore b/arch/x86/.gitignore
new file mode 100644
index 0000000..0280790
--- /dev/null
+++ b/arch/x86/.gitignore
@@ -0,0 +1,3 @@
+boot/compressed/vmlinux
+tools/test_get_len
+
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index e0c619c..dcb0593 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -109,6 +109,9 @@
config NEED_DMA_MAP_STATE
def_bool (X86_64 || DMAR || DMA_API_DEBUG)
+config NEED_SG_DMA_LENGTH
+ def_bool y
+
config GENERIC_ISA_DMA
def_bool y
@@ -1703,6 +1706,10 @@
def_bool X86_64
depends on NUMA
+config USE_PERCPU_NUMA_NODE_ID
+ def_bool X86_64
+ depends on NUMA
+
menu "Power management and ACPI options"
config ARCH_HIBERNATION_HEADER
diff --git a/arch/x86/boot/compressed/mkpiggy.c b/arch/x86/boot/compressed/mkpiggy.c
index bcbd36c..5c22812 100644
--- a/arch/x86/boot/compressed/mkpiggy.c
+++ b/arch/x86/boot/compressed/mkpiggy.c
@@ -77,7 +77,7 @@
offs += 32*1024 + 18; /* Add 32K + 18 bytes slack */
offs = (offs+4095) & ~4095; /* Round to a 4K boundary */
- printf(".section \".rodata.compressed\",\"a\",@progbits\n");
+ printf(".section \".rodata..compressed\",\"a\",@progbits\n");
printf(".globl z_input_len\n");
printf("z_input_len = %lu\n", ilen);
printf(".globl z_output_len\n");
diff --git a/arch/x86/boot/compressed/relocs.c b/arch/x86/boot/compressed/relocs.c
index 7b1aaa2..89bbf4e 100644
--- a/arch/x86/boot/compressed/relocs.c
+++ b/arch/x86/boot/compressed/relocs.c
@@ -195,11 +195,11 @@
-#if __BYTE_ORDER == __LITTLE_ENDIAN
+#if BYTE_ORDER == LITTLE_ENDIAN
#define le16_to_cpu(val) (val)
#define le32_to_cpu(val) (val)
#endif
-#if __BYTE_ORDER == __BIG_ENDIAN
+#if BYTE_ORDER == BIG_ENDIAN
#define le16_to_cpu(val) bswap_16(val)
#define le32_to_cpu(val) bswap_32(val)
#endif
diff --git a/arch/x86/boot/compressed/vmlinux.lds.S b/arch/x86/boot/compressed/vmlinux.lds.S
index a6f1a59..5ddabce 100644
--- a/arch/x86/boot/compressed/vmlinux.lds.S
+++ b/arch/x86/boot/compressed/vmlinux.lds.S
@@ -26,8 +26,8 @@
HEAD_TEXT
_ehead = . ;
}
- .rodata.compressed : {
- *(.rodata.compressed)
+ .rodata..compressed : {
+ *(.rodata..compressed)
}
.text : {
_text = .; /* Text */
diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c
index ed7aeff..45bc940 100644
--- a/arch/x86/boot/video-vga.c
+++ b/arch/x86/boot/video-vga.c
@@ -41,13 +41,12 @@
static u8 vga_set_basic_mode(void)
{
struct biosregs ireg, oreg;
- u16 ax;
u8 mode;
initregs(&ireg);
/* Query current mode */
- ax = 0x0f00;
+ ireg.ax = 0x0f00;
intcall(0x10, &ireg, &oreg);
mode = oreg.al;
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index 56f462c..aa2c39d 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -85,7 +85,6 @@
extern int acpi_noirq;
extern int acpi_strict;
extern int acpi_disabled;
-extern int acpi_ht;
extern int acpi_pci_disabled;
extern int acpi_skip_timer_override;
extern int acpi_use_timer_override;
@@ -97,7 +96,6 @@
static inline void disable_acpi(void)
{
acpi_disabled = 1;
- acpi_ht = 0;
acpi_pci_disabled = 1;
acpi_noirq = 1;
}
diff --git a/arch/x86/include/asm/cache.h b/arch/x86/include/asm/cache.h
index 2f9047c..48f99f1 100644
--- a/arch/x86/include/asm/cache.h
+++ b/arch/x86/include/asm/cache.h
@@ -7,7 +7,7 @@
#define L1_CACHE_SHIFT (CONFIG_X86_L1_CACHE_SHIFT)
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
#define INTERNODE_CACHE_SHIFT CONFIG_X86_INTERNODE_CACHE_SHIFT
#define INTERNODE_CACHE_BYTES (1 << INTERNODE_CACHE_SHIFT)
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index dca9c54..4681459 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -332,6 +332,7 @@
#endif
}
+#if __GNUC__ >= 4
#define static_cpu_has(bit) \
( \
__builtin_constant_p(boot_cpu_has(bit)) ? \
@@ -340,6 +341,12 @@
__static_cpu_has(bit) : \
boot_cpu_has(bit) \
)
+#else
+/*
+ * gcc 3.x is too stupid to do the static test; fall back to dynamic.
+ */
+#define static_cpu_has(bit) boot_cpu_has(bit)
+#endif
#endif /* defined(__KERNEL__) && !defined(__ASSEMBLY__) */
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 63cb409..9cb2edb 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -183,7 +183,7 @@
u32 gsi_end;
};
extern struct mp_ioapic_gsi mp_gsi_routing[];
-extern u32 gsi_end;
+extern u32 gsi_top;
int mp_find_ioapic(u32 gsi);
int mp_find_ioapic_pin(int ioapic, u32 gsi);
void __init mp_register_ioapic(int id, u32 address, u32 gsi_base);
@@ -197,7 +197,7 @@
static inline void ioapic_init_mappings(void) { }
static inline void ioapic_insert_resources(void) { }
static inline void probe_nr_irqs_gsi(void) { }
-#define gsi_end (NR_IRQS_LEGACY - 1)
+#define gsi_top (NR_IRQS_LEGACY)
static inline int mp_find_ioapic(u32 gsi) { return 0; }
struct io_apic_irq_attr;
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 6c3fdd6..f32a430 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -225,5 +225,13 @@
static inline void mcheck_intel_therm_init(void) { }
#endif
+/*
+ * Used by APEI to report memory error via /dev/mcelog
+ */
+
+struct cper_sec_mem_err;
+extern void apei_mce_report_mem_error(int corrected,
+ struct cper_sec_mem_err *mem_err);
+
#endif /* __KERNEL__ */
#endif /* _ASM_X86_MCE_H */
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index b49d8ca..8c7ae43 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -110,6 +110,7 @@
#define MSR_AMD64_PATCH_LOADER 0xc0010020
#define MSR_AMD64_OSVW_ID_LENGTH 0xc0010140
#define MSR_AMD64_OSVW_STATUS 0xc0010141
+#define MSR_AMD64_DC_CFG 0xc0011022
#define MSR_AMD64_IBSFETCHCTL 0xc0011030
#define MSR_AMD64_IBSFETCHLINAD 0xc0011031
#define MSR_AMD64_IBSFETCHPHYSAD 0xc0011032
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index 8d8797e..cd2a31d 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -53,6 +53,8 @@
extern struct pci_bus *pci_root_bus;
extern struct pci_ops pci_root_ops;
+void pcibios_scan_specific_bus(int busn);
+
/* pci-irq.c */
struct irq_info {
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 0797e74..cd28f9a 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -77,6 +77,7 @@
if (0) { \
pto_T__ pto_tmp__; \
pto_tmp__ = (val); \
+ (void)pto_tmp__; \
} \
switch (sizeof(var)) { \
case 1: \
@@ -115,6 +116,7 @@
if (0) { \
pao_T__ pao_tmp__; \
pao_tmp__ = (val); \
+ (void)pao_tmp__; \
} \
switch (sizeof(var)) { \
case 1: \
diff --git a/arch/x86/include/asm/perf_event_p4.h b/arch/x86/include/asm/perf_event_p4.h
index b05400a..64a8ebf 100644
--- a/arch/x86/include/asm/perf_event_p4.h
+++ b/arch/x86/include/asm/perf_event_p4.h
@@ -89,7 +89,8 @@
P4_CCCR_ENABLE)
/* HT mask */
-#define P4_CCCR_MASK_HT (P4_CCCR_MASK | P4_CCCR_THREAD_ANY)
+#define P4_CCCR_MASK_HT \
+ (P4_CCCR_MASK | P4_CCCR_OVF_PMI_T1 | P4_CCCR_THREAD_ANY)
#define P4_GEN_ESCR_EMASK(class, name, bit) \
class##__##name = ((1 << bit) << P4_ESCR_EVENTMASK_SHIFT)
diff --git a/arch/x86/include/asm/pgtable_32_types.h b/arch/x86/include/asm/pgtable_32_types.h
index 5e67c15..ed5903be 100644
--- a/arch/x86/include/asm/pgtable_32_types.h
+++ b/arch/x86/include/asm/pgtable_32_types.h
@@ -26,7 +26,7 @@
*/
#define VMALLOC_OFFSET (8 * 1024 * 1024)
-#ifndef __ASSEMBLER__
+#ifndef __ASSEMBLY__
extern bool __vmalloc_start_set; /* set once high_memory is set */
#endif
diff --git a/arch/x86/include/asm/rdc321x_defs.h b/arch/x86/include/asm/rdc321x_defs.h
deleted file mode 100644
index c8e9c8b..0000000
--- a/arch/x86/include/asm/rdc321x_defs.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#define PFX "rdc321x: "
-
-/* General purpose configuration and data registers */
-#define RDC3210_CFGREG_ADDR 0x0CF8
-#define RDC3210_CFGREG_DATA 0x0CFC
-
-#define RDC321X_GPIO_CTRL_REG1 0x48
-#define RDC321X_GPIO_CTRL_REG2 0x84
-#define RDC321X_GPIO_DATA_REG1 0x4c
-#define RDC321X_GPIO_DATA_REG2 0x88
-
-#define RDC321X_MAX_GPIO 58
diff --git a/arch/x86/include/asm/scatterlist.h b/arch/x86/include/asm/scatterlist.h
index 75af592..fb0b187 100644
--- a/arch/x86/include/asm/scatterlist.h
+++ b/arch/x86/include/asm/scatterlist.h
@@ -1,8 +1,9 @@
#ifndef _ASM_X86_SCATTERLIST_H
#define _ASM_X86_SCATTERLIST_H
-#define ISA_DMA_THRESHOLD (0x00ffffff)
-
#include <asm-generic/scatterlist.h>
+#define ISA_DMA_THRESHOLD (0x00ffffff)
+#define ARCH_HAS_SG_CHAIN
+
#endif /* _ASM_X86_SCATTERLIST_H */
diff --git a/arch/x86/include/asm/suspend_32.h b/arch/x86/include/asm/suspend_32.h
index 48dcfa6..fd921c3 100644
--- a/arch/x86/include/asm/suspend_32.h
+++ b/arch/x86/include/asm/suspend_32.h
@@ -15,6 +15,8 @@
struct saved_context {
u16 es, fs, gs, ss;
unsigned long cr0, cr2, cr3, cr4;
+ u64 misc_enable;
+ bool misc_enable_saved;
struct desc_ptr gdt;
struct desc_ptr idt;
u16 ldt;
diff --git a/arch/x86/include/asm/suspend_64.h b/arch/x86/include/asm/suspend_64.h
index 06284f4..8d942af 100644
--- a/arch/x86/include/asm/suspend_64.h
+++ b/arch/x86/include/asm/suspend_64.h
@@ -27,6 +27,8 @@
u16 ds, es, fs, gs, ss;
unsigned long gs_base, gs_kernel_base, fs_base;
unsigned long cr0, cr2, cr3, cr4, cr8;
+ u64 misc_enable;
+ bool misc_enable_saved;
unsigned long efer;
u16 gdt_pad;
u16 gdt_limit;
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index b8fe48e..e7f4d33 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -451,7 +451,7 @@
*
* (Could use an alternative three way for this if there was one.)
*/
-static inline void rdtsc_barrier(void)
+static __always_inline void rdtsc_barrier(void)
{
alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index 62ba940..f0b6e5d 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -239,8 +239,8 @@
#define TS_USEDFPU 0x0001 /* FPU was used by this task
this quantum (SMP) */
#define TS_COMPAT 0x0002 /* 32bit syscall active (64BIT)*/
-#define TS_POLLING 0x0004 /* true if in idle loop
- and not sleeping */
+#define TS_POLLING 0x0004 /* idle task polling need_resched,
+ skip sending interrupt */
#define TS_RESTORE_SIGMASK 0x0008 /* restore signal mask in do_signal() */
#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index c5087d7..21899cc3 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -53,33 +53,29 @@
extern int cpu_to_node_map[];
/* Returns the number of the node containing CPU 'cpu' */
-static inline int cpu_to_node(int cpu)
+static inline int __cpu_to_node(int cpu)
{
return cpu_to_node_map[cpu];
}
-#define early_cpu_to_node(cpu) cpu_to_node(cpu)
+#define early_cpu_to_node __cpu_to_node
+#define cpu_to_node __cpu_to_node
#else /* CONFIG_X86_64 */
/* Mappings between logical cpu number and node number */
DECLARE_EARLY_PER_CPU(int, x86_cpu_to_node_map);
-/* Returns the number of the current Node. */
-DECLARE_PER_CPU(int, node_number);
-#define numa_node_id() percpu_read(node_number)
-
#ifdef CONFIG_DEBUG_PER_CPU_MAPS
-extern int cpu_to_node(int cpu);
+/*
+ * override generic percpu implementation of cpu_to_node
+ */
+extern int __cpu_to_node(int cpu);
+#define cpu_to_node __cpu_to_node
+
extern int early_cpu_to_node(int cpu);
#else /* !CONFIG_DEBUG_PER_CPU_MAPS */
-/* Returns the number of the node containing CPU 'cpu' */
-static inline int cpu_to_node(int cpu)
-{
- return per_cpu(x86_cpu_to_node_map, cpu);
-}
-
/* Same function but used if called before per_cpu areas are setup */
static inline int early_cpu_to_node(int cpu)
{
@@ -170,6 +166,10 @@
{
return 0;
}
+/*
+ * indicate override:
+ */
+#define numa_node_id numa_node_id
static inline int early_cpu_to_node(int cpu)
{
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 519b543..baa579c 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -142,6 +142,7 @@
* @set_wallclock: set time back to HW clock
* @is_untracked_pat_range exclude from PAT logic
* @nmi_init enable NMI on cpus
+ * @i8042_detect pre-detect if i8042 controller exists
*/
struct x86_platform_ops {
unsigned long (*calibrate_tsc)(void);
@@ -150,6 +151,7 @@
void (*iommu_shutdown)(void);
bool (*is_untracked_pat_range)(u64 start, u64 end);
void (*nmi_init)(void);
+ int (*i8042_detect)(void);
};
extern struct x86_init_ops x86_init;
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 488be46..c05872a 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -63,7 +63,6 @@
int acpi_noirq; /* skip ACPI IRQ initialization */
int acpi_pci_disabled; /* skip ACPI PCI scan and IRQ initialization */
EXPORT_SYMBOL(acpi_pci_disabled);
-int acpi_ht __initdata = 1; /* enable HT */
int acpi_lapic;
int acpi_ioapic;
@@ -119,7 +118,7 @@
if (gsi >= NR_IRQS_LEGACY)
irq = gsi;
else
- irq = gsi_end + 1 + gsi;
+ irq = gsi_top + gsi;
return irq;
}
@@ -130,10 +129,10 @@
if (irq < NR_IRQS_LEGACY)
gsi = isa_irq_to_gsi[irq];
- else if (irq <= gsi_end)
+ else if (irq < gsi_top)
gsi = irq;
- else if (irq <= (gsi_end + NR_IRQS_LEGACY))
- gsi = irq - gsi_end;
+ else if (irq < (gsi_top + NR_IRQS_LEGACY))
+ gsi = irq - gsi_top;
else
gsi = 0xffffffff;
@@ -1501,9 +1500,8 @@
/*
* If acpi_disabled, bail out
- * One exception: acpi=ht continues far enough to enumerate LAPICs
*/
- if (acpi_disabled && !acpi_ht)
+ if (acpi_disabled)
return;
/*
@@ -1534,9 +1532,8 @@
{
/*
* If acpi_disabled, bail out
- * One exception: acpi=ht continues far enough to enumerate LAPICs
*/
- if (acpi_disabled && !acpi_ht)
+ if (acpi_disabled)
return 1;
/*
@@ -1554,9 +1551,8 @@
/*
* If acpi_disabled, bail out
- * One exception: acpi=ht continues far enough to enumerate LAPICs
*/
- if (acpi_disabled && !acpi_ht)
+ if (acpi_disabled)
return 1;
acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);
@@ -1591,21 +1587,12 @@
/* acpi=force to over-ride black-list */
else if (strcmp(arg, "force") == 0) {
acpi_force = 1;
- acpi_ht = 1;
acpi_disabled = 0;
}
/* acpi=strict disables out-of-spec workarounds */
else if (strcmp(arg, "strict") == 0) {
acpi_strict = 1;
}
- /* Limit ACPI just to boot-time to enable HT */
- else if (strcmp(arg, "ht") == 0) {
- if (!acpi_force) {
- printk(KERN_WARNING "acpi=ht will be removed in Linux-2.6.35\n");
- disable_acpi();
- }
- acpi_ht = 1;
- }
/* acpi=rsdt use RSDT instead of XSDT */
else if (strcmp(arg, "rsdt") == 0) {
acpi_rsdt_forced = 1;
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index f996103..82e5086 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -162,8 +162,6 @@
#endif
if (strncmp(str, "old_ordering", 12) == 0)
acpi_old_suspend_ordering();
- if (strncmp(str, "sci_force_enable", 16) == 0)
- acpi_set_sci_en_on_resume();
str = strchr(str, ',');
if (str != NULL)
str += strspn(str, ", \t");
diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S
index 8ded418..13ab720 100644
--- a/arch/x86/kernel/acpi/wakeup_32.S
+++ b/arch/x86/kernel/acpi/wakeup_32.S
@@ -1,4 +1,4 @@
- .section .text.page_aligned
+ .section .text..page_aligned
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/page_types.h>
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index fa5a147..0d20286 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1487,6 +1487,7 @@
struct protection_domain *domain)
{
struct iommu_dev_data *dev_data, *alias_data;
+ int ret;
dev_data = get_dev_data(dev);
alias_data = get_dev_data(dev_data->alias);
@@ -1498,13 +1499,14 @@
spin_lock(&domain->lock);
/* Some sanity checks */
+ ret = -EBUSY;
if (alias_data->domain != NULL &&
alias_data->domain != domain)
- return -EBUSY;
+ goto out_unlock;
if (dev_data->domain != NULL &&
dev_data->domain != domain)
- return -EBUSY;
+ goto out_unlock;
/* Do real assignment */
if (dev_data->alias != dev) {
@@ -1520,10 +1522,14 @@
atomic_inc(&dev_data->bind);
+ ret = 0;
+
+out_unlock:
+
/* ready */
spin_unlock(&domain->lock);
- return 0;
+ return ret;
}
/*
@@ -2324,10 +2330,6 @@
iommu_detected = 1;
swiotlb = 0;
-#ifdef CONFIG_GART_IOMMU
- gart_iommu_aperture_disabled = 1;
- gart_iommu_aperture = 0;
-#endif
/* Make the driver finally visible to the drivers */
dma_ops = &amd_iommu_dma_ops;
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 3bacb4d..3cc63e2 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -287,8 +287,12 @@
{
u8 *ret;
- if (!request_mem_region(address, MMIO_REGION_LENGTH, "amd_iommu"))
+ if (!request_mem_region(address, MMIO_REGION_LENGTH, "amd_iommu")) {
+ pr_err("AMD-Vi: Can not reserve memory region %llx for mmio\n",
+ address);
+ pr_err("AMD-Vi: This is a BIOS bug. Please contact your hardware vendor\n");
return NULL;
+ }
ret = ioremap_nocache(address, MMIO_REGION_LENGTH);
if (ret != NULL)
@@ -1314,7 +1318,7 @@
ret = amd_iommu_init_dma_ops();
if (ret)
- goto free;
+ goto free_disable;
amd_iommu_init_api();
@@ -1332,9 +1336,10 @@
out:
return ret;
-free:
+free_disable:
disable_iommus();
+free:
amd_iommu_uninit_devices();
free_pages((unsigned long)amd_iommu_pd_alloc_bitmap,
@@ -1353,6 +1358,15 @@
free_unity_maps();
+#ifdef CONFIG_GART_IOMMU
+ /*
+ * We failed to initialize the AMD IOMMU - try fallback to GART
+ * if possible.
+ */
+ gart_iommu_init();
+
+#endif
+
goto out;
}
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index e5a4a1e..a96489e 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -51,6 +51,7 @@
#include <asm/smp.h>
#include <asm/mce.h>
#include <asm/kvm_para.h>
+#include <asm/tsc.h>
unsigned int num_processors;
@@ -920,7 +921,7 @@
unsigned int value;
/* APIC hasn't been mapped yet */
- if (!apic_phys)
+ if (!x2apic_mode && !apic_phys)
return;
clear_local_APIC();
@@ -1151,8 +1152,13 @@
*/
void __cpuinit setup_local_APIC(void)
{
- unsigned int value;
- int i, j;
+ unsigned int value, queued;
+ int i, j, acked = 0;
+ unsigned long long tsc = 0, ntsc;
+ long long max_loops = cpu_khz;
+
+ if (cpu_has_tsc)
+ rdtscll(tsc);
if (disable_apic) {
arch_disable_smp_support();
@@ -1204,13 +1210,32 @@
* the interrupt. Hence a vector might get locked. It was noticed
* for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
*/
- for (i = APIC_ISR_NR - 1; i >= 0; i--) {
- value = apic_read(APIC_ISR + i*0x10);
- for (j = 31; j >= 0; j--) {
- if (value & (1<<j))
- ack_APIC_irq();
+ do {
+ queued = 0;
+ for (i = APIC_ISR_NR - 1; i >= 0; i--)
+ queued |= apic_read(APIC_IRR + i*0x10);
+
+ for (i = APIC_ISR_NR - 1; i >= 0; i--) {
+ value = apic_read(APIC_ISR + i*0x10);
+ for (j = 31; j >= 0; j--) {
+ if (value & (1<<j)) {
+ ack_APIC_irq();
+ acked++;
+ }
+ }
}
- }
+ if (acked > 256) {
+ printk(KERN_ERR "LAPIC pending interrupts after %d EOI\n",
+ acked);
+ break;
+ }
+ if (cpu_has_tsc) {
+ rdtscll(ntsc);
+ max_loops = (cpu_khz << 10) - (ntsc - tsc);
+ } else
+ max_loops--;
+ } while (queued && max_loops > 0);
+ WARN_ON(max_loops <= 0);
/*
* Now that we are all set up, enable the APIC
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 33f3563..e41ed24 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -89,8 +89,8 @@
/* IO APIC gsi routing info */
struct mp_ioapic_gsi mp_gsi_routing[MAX_IO_APICS];
-/* The last gsi number used */
-u32 gsi_end;
+/* The one past the highest gsi number used */
+u32 gsi_top;
/* MP IRQ source entries */
struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
@@ -1035,7 +1035,7 @@
if (gsi >= NR_IRQS_LEGACY)
irq = gsi;
else
- irq = gsi_end + 1 + gsi;
+ irq = gsi_top + gsi;
}
#ifdef CONFIG_X86_32
@@ -3853,7 +3853,7 @@
{
int nr;
- nr = gsi_end + 1 + NR_IRQS_LEGACY;
+ nr = gsi_top + NR_IRQS_LEGACY;
if (nr > nr_irqs_gsi)
nr_irqs_gsi = nr;
@@ -4294,8 +4294,8 @@
*/
nr_ioapic_registers[idx] = entries;
- if (mp_gsi_routing[idx].gsi_end > gsi_end)
- gsi_end = mp_gsi_routing[idx].gsi_end;
+ if (mp_gsi_routing[idx].gsi_end >= gsi_top)
+ gsi_top = mp_gsi_routing[idx].gsi_end + 1;
printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
"GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index cc83a00..68e4a6f 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1121,9 +1121,9 @@
oist = &per_cpu(orig_ist, cpu);
#ifdef CONFIG_NUMA
- if (cpu != 0 && percpu_read(node_number) == 0 &&
- cpu_to_node(cpu) != NUMA_NO_NODE)
- percpu_write(node_number, cpu_to_node(cpu));
+ if (cpu != 0 && percpu_read(numa_node) == 0 &&
+ early_cpu_to_node(cpu) != NUMA_NO_NODE)
+ set_numa_node(early_cpu_to_node(cpu));
#endif
me = current;
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 6f3dc8f..7ec2123 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -1497,8 +1497,8 @@
* simply keep the boost-disable flag in sync with the current global
* state.
*/
-static int __cpuinit cpb_notify(struct notifier_block *nb, unsigned long action,
- void *hcpu)
+static int cpb_notify(struct notifier_block *nb, unsigned long action,
+ void *hcpu)
{
unsigned cpu = (long)hcpu;
u32 lo, hi;
@@ -1528,7 +1528,7 @@
return NOTIFY_OK;
}
-static struct notifier_block __cpuinitdata cpb_nb = {
+static struct notifier_block cpb_nb = {
.notifier_call = cpb_notify,
};
diff --git a/arch/x86/kernel/cpu/mcheck/Makefile b/arch/x86/kernel/cpu/mcheck/Makefile
index 4ac6d48..bb34b03 100644
--- a/arch/x86/kernel/cpu/mcheck/Makefile
+++ b/arch/x86/kernel/cpu/mcheck/Makefile
@@ -7,3 +7,5 @@
obj-$(CONFIG_X86_MCE_INJECT) += mce-inject.o
obj-$(CONFIG_X86_THERMAL_VECTOR) += therm_throt.o
+
+obj-$(CONFIG_ACPI_APEI) += mce-apei.o
diff --git a/arch/x86/kernel/cpu/mcheck/mce-apei.c b/arch/x86/kernel/cpu/mcheck/mce-apei.c
new file mode 100644
index 0000000..745b54f
--- /dev/null
+++ b/arch/x86/kernel/cpu/mcheck/mce-apei.c
@@ -0,0 +1,138 @@
+/*
+ * Bridge between MCE and APEI
+ *
+ * On some machine, corrected memory errors are reported via APEI
+ * generic hardware error source (GHES) instead of corrected Machine
+ * Check. These corrected memory errors can be reported to user space
+ * through /dev/mcelog via faking a corrected Machine Check, so that
+ * the error memory page can be offlined by /sbin/mcelog if the error
+ * count for one page is beyond the threshold.
+ *
+ * For fatal MCE, save MCE record into persistent storage via ERST, so
+ * that the MCE record can be logged after reboot via ERST.
+ *
+ * Copyright 2010 Intel Corp.
+ * Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/acpi.h>
+#include <linux/cper.h>
+#include <acpi/apei.h>
+#include <asm/mce.h>
+
+#include "mce-internal.h"
+
+void apei_mce_report_mem_error(int corrected, struct cper_sec_mem_err *mem_err)
+{
+ struct mce m;
+
+ /* Only corrected MC is reported */
+ if (!corrected)
+ return;
+
+ mce_setup(&m);
+ m.bank = 1;
+ /* Fake a memory read corrected error with unknown channel */
+ m.status = MCI_STATUS_VAL | MCI_STATUS_EN | MCI_STATUS_ADDRV | 0x9f;
+ m.addr = mem_err->physical_addr;
+ mce_log(&m);
+ mce_notify_irq();
+}
+EXPORT_SYMBOL_GPL(apei_mce_report_mem_error);
+
+#define CPER_CREATOR_MCE \
+ UUID_LE(0x75a574e3, 0x5052, 0x4b29, 0x8a, 0x8e, 0xbe, 0x2c, \
+ 0x64, 0x90, 0xb8, 0x9d)
+#define CPER_SECTION_TYPE_MCE \
+ UUID_LE(0xfe08ffbe, 0x95e4, 0x4be7, 0xbc, 0x73, 0x40, 0x96, \
+ 0x04, 0x4a, 0x38, 0xfc)
+
+/*
+ * CPER specification (in UEFI specification 2.3 appendix N) requires
+ * byte-packed.
+ */
+struct cper_mce_record {
+ struct cper_record_header hdr;
+ struct cper_section_descriptor sec_hdr;
+ struct mce mce;
+} __packed;
+
+int apei_write_mce(struct mce *m)
+{
+ struct cper_mce_record rcd;
+
+ memset(&rcd, 0, sizeof(rcd));
+ memcpy(rcd.hdr.signature, CPER_SIG_RECORD, CPER_SIG_SIZE);
+ rcd.hdr.revision = CPER_RECORD_REV;
+ rcd.hdr.signature_end = CPER_SIG_END;
+ rcd.hdr.section_count = 1;
+ rcd.hdr.error_severity = CPER_SER_FATAL;
+ /* timestamp, platform_id, partition_id are all invalid */
+ rcd.hdr.validation_bits = 0;
+ rcd.hdr.record_length = sizeof(rcd);
+ rcd.hdr.creator_id = CPER_CREATOR_MCE;
+ rcd.hdr.notification_type = CPER_NOTIFY_MCE;
+ rcd.hdr.record_id = cper_next_record_id();
+ rcd.hdr.flags = CPER_HW_ERROR_FLAGS_PREVERR;
+
+ rcd.sec_hdr.section_offset = (void *)&rcd.mce - (void *)&rcd;
+ rcd.sec_hdr.section_length = sizeof(rcd.mce);
+ rcd.sec_hdr.revision = CPER_SEC_REV;
+ /* fru_id and fru_text is invalid */
+ rcd.sec_hdr.validation_bits = 0;
+ rcd.sec_hdr.flags = CPER_SEC_PRIMARY;
+ rcd.sec_hdr.section_type = CPER_SECTION_TYPE_MCE;
+ rcd.sec_hdr.section_severity = CPER_SER_FATAL;
+
+ memcpy(&rcd.mce, m, sizeof(*m));
+
+ return erst_write(&rcd.hdr);
+}
+
+ssize_t apei_read_mce(struct mce *m, u64 *record_id)
+{
+ struct cper_mce_record rcd;
+ ssize_t len;
+
+ len = erst_read_next(&rcd.hdr, sizeof(rcd));
+ if (len <= 0)
+ return len;
+ /* Can not skip other records in storage via ERST unless clear them */
+ else if (len != sizeof(rcd) ||
+ uuid_le_cmp(rcd.hdr.creator_id, CPER_CREATOR_MCE)) {
+ if (printk_ratelimit())
+ pr_warning(
+ "MCE-APEI: Can not skip the unknown record in ERST");
+ return -EIO;
+ }
+
+ memcpy(m, &rcd.mce, sizeof(*m));
+ *record_id = rcd.hdr.record_id;
+
+ return sizeof(*m);
+}
+
+/* Check whether there is record in ERST */
+int apei_check_mce(void)
+{
+ return erst_get_record_count();
+}
+
+int apei_clear_mce(u64 record_id)
+{
+ return erst_clear(record_id);
+}
diff --git a/arch/x86/kernel/cpu/mcheck/mce-internal.h b/arch/x86/kernel/cpu/mcheck/mce-internal.h
index 32996f9..fefcc69 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-internal.h
+++ b/arch/x86/kernel/cpu/mcheck/mce-internal.h
@@ -28,3 +28,26 @@
extern struct mce_bank *mce_banks;
+#ifdef CONFIG_ACPI_APEI
+int apei_write_mce(struct mce *m);
+ssize_t apei_read_mce(struct mce *m, u64 *record_id);
+int apei_check_mce(void);
+int apei_clear_mce(u64 record_id);
+#else
+static inline int apei_write_mce(struct mce *m)
+{
+ return -EINVAL;
+}
+static inline ssize_t apei_read_mce(struct mce *m, u64 *record_id)
+{
+ return 0;
+}
+static inline int apei_check_mce(void)
+{
+ return 0;
+}
+static inline int apei_clear_mce(u64 record_id)
+{
+ return -EINVAL;
+}
+#endif
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 7a355dd..18cc425 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -36,6 +36,7 @@
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/debugfs.h>
+#include <linux/edac_mce.h>
#include <asm/processor.h>
#include <asm/hw_irq.h>
@@ -169,6 +170,15 @@
entry = rcu_dereference_check_mce(mcelog.next);
for (;;) {
/*
+ * If edac_mce is enabled, it will check the error type
+ * and will process it, if it is a known error.
+ * Otherwise, the error will be sent through mcelog
+ * interface
+ */
+ if (edac_mce_parse(mce))
+ return;
+
+ /*
* When the buffer fills up discard new entries.
* Assume that the earlier errors are the more
* interesting ones:
@@ -264,7 +274,7 @@
static void mce_panic(char *msg, struct mce *final, char *exp)
{
- int i;
+ int i, apei_err = 0;
if (!fake_panic) {
/*
@@ -287,8 +297,11 @@
struct mce *m = &mcelog.entry[i];
if (!(m->status & MCI_STATUS_VAL))
continue;
- if (!(m->status & MCI_STATUS_UC))
+ if (!(m->status & MCI_STATUS_UC)) {
print_mce(m);
+ if (!apei_err)
+ apei_err = apei_write_mce(m);
+ }
}
/* Now print uncorrected but with the final one last */
for (i = 0; i < MCE_LOG_LEN; i++) {
@@ -297,11 +310,17 @@
continue;
if (!(m->status & MCI_STATUS_UC))
continue;
- if (!final || memcmp(m, final, sizeof(struct mce)))
+ if (!final || memcmp(m, final, sizeof(struct mce))) {
print_mce(m);
+ if (!apei_err)
+ apei_err = apei_write_mce(m);
+ }
}
- if (final)
+ if (final) {
print_mce(final);
+ if (!apei_err)
+ apei_err = apei_write_mce(final);
+ }
if (cpu_missing)
printk(KERN_EMERG "Some CPUs didn't answer in synchronization\n");
print_mce_tail();
@@ -1493,6 +1512,43 @@
rdtscll(cpu_tsc[smp_processor_id()]);
}
+static int mce_apei_read_done;
+
+/* Collect MCE record of previous boot in persistent storage via APEI ERST. */
+static int __mce_read_apei(char __user **ubuf, size_t usize)
+{
+ int rc;
+ u64 record_id;
+ struct mce m;
+
+ if (usize < sizeof(struct mce))
+ return -EINVAL;
+
+ rc = apei_read_mce(&m, &record_id);
+ /* Error or no more MCE record */
+ if (rc <= 0) {
+ mce_apei_read_done = 1;
+ return rc;
+ }
+ rc = -EFAULT;
+ if (copy_to_user(*ubuf, &m, sizeof(struct mce)))
+ return rc;
+ /*
+ * In fact, we should have cleared the record after that has
+ * been flushed to the disk or sent to network in
+ * /sbin/mcelog, but we have no interface to support that now,
+ * so just clear it to avoid duplication.
+ */
+ rc = apei_clear_mce(record_id);
+ if (rc) {
+ mce_apei_read_done = 1;
+ return rc;
+ }
+ *ubuf += sizeof(struct mce);
+
+ return 0;
+}
+
static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
loff_t *off)
{
@@ -1506,15 +1562,19 @@
return -ENOMEM;
mutex_lock(&mce_read_mutex);
+
+ if (!mce_apei_read_done) {
+ err = __mce_read_apei(&buf, usize);
+ if (err || buf != ubuf)
+ goto out;
+ }
+
next = rcu_dereference_check_mce(mcelog.next);
/* Only supports full reads right now */
- if (*off != 0 || usize < MCE_LOG_LEN*sizeof(struct mce)) {
- mutex_unlock(&mce_read_mutex);
- kfree(cpu_tsc);
-
- return -EINVAL;
- }
+ err = -EINVAL;
+ if (*off != 0 || usize < MCE_LOG_LEN*sizeof(struct mce))
+ goto out;
err = 0;
prev = 0;
@@ -1562,10 +1622,15 @@
memset(&mcelog.entry[i], 0, sizeof(struct mce));
}
}
+
+ if (err)
+ err = -EFAULT;
+
+out:
mutex_unlock(&mce_read_mutex);
kfree(cpu_tsc);
- return err ? -EFAULT : buf - ubuf;
+ return err ? err : buf - ubuf;
}
static unsigned int mce_poll(struct file *file, poll_table *wait)
@@ -1573,6 +1638,8 @@
poll_wait(file, &mce_wait, wait);
if (rcu_dereference_check_mce(mcelog.next))
return POLLIN | POLLRDNORM;
+ if (!mce_apei_read_done && apei_check_mce())
+ return POLLIN | POLLRDNORM;
return 0;
}
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 81c499e..e1a0a3b 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -190,7 +190,7 @@
mutex_unlock(&therm_cpu_lock);
break;
}
- return err ? NOTIFY_BAD : NOTIFY_OK;
+ return notifier_from_errno(err);
}
static struct notifier_block thermal_throttle_cpu_notifier __cpuinitdata =
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index fd4db0d..5db5b7d 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -106,6 +106,7 @@
int n_events;
int n_added;
+ int n_txn;
int assign[X86_PMC_IDX_MAX]; /* event to counter assignment */
u64 tags[X86_PMC_IDX_MAX];
struct perf_event *event_list[X86_PMC_IDX_MAX]; /* in enabled order */
@@ -983,6 +984,7 @@
out:
cpuc->n_events = n;
cpuc->n_added += n - n0;
+ cpuc->n_txn += n - n0;
return 0;
}
@@ -1089,6 +1091,14 @@
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
int i;
+ /*
+ * If we're called during a txn, we don't need to do anything.
+ * The events never got scheduled and ->cancel_txn will truncate
+ * the event_list.
+ */
+ if (cpuc->group_flag & PERF_EVENT_TXN_STARTED)
+ return;
+
x86_pmu_stop(event);
for (i = 0; i < cpuc->n_events; i++) {
@@ -1379,6 +1389,7 @@
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
cpuc->group_flag |= PERF_EVENT_TXN_STARTED;
+ cpuc->n_txn = 0;
}
/*
@@ -1391,6 +1402,11 @@
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
cpuc->group_flag &= ~PERF_EVENT_TXN_STARTED;
+ /*
+ * Truncate the collected events.
+ */
+ cpuc->n_added -= cpuc->n_txn;
+ cpuc->n_events -= cpuc->n_txn;
}
/*
@@ -1419,6 +1435,12 @@
*/
memcpy(cpuc->assign, assign, n*sizeof(int));
+ /*
+ * Clear out the txn count so that ->cancel_txn() which gets
+ * run after ->commit_txn() doesn't undo things.
+ */
+ cpuc->n_txn = 0;
+
return 0;
}
@@ -1717,7 +1739,11 @@
*/
regs->bp = rewind_frame_pointer(skip + 1);
regs->cs = __KERNEL_CS;
- local_save_flags(regs->flags);
+ /*
+ * We abuse bit 3 to pass exact information, see perf_misc_flags
+ * and the comment with PERF_EFLAGS_EXACT.
+ */
+ regs->flags = 0;
}
unsigned long perf_instruction_pointer(struct pt_regs *regs)
diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c
index 611df11..c2897b7 100644
--- a/arch/x86/kernel/cpu/perf_event_amd.c
+++ b/arch/x86/kernel/cpu/perf_event_amd.c
@@ -102,8 +102,8 @@
[PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0,
[PERF_COUNT_HW_CACHE_REFERENCES] = 0x0080,
[PERF_COUNT_HW_CACHE_MISSES] = 0x0081,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c4,
- [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c5,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c2,
+ [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c3,
};
static u64 amd_pmu_event_map(int hw_event)
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index fdbc652..214ac86 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -72,6 +72,7 @@
INTEL_EVENT_CONSTRAINT(0x51, 0x3), /* L1D */
INTEL_EVENT_CONSTRAINT(0x60, 0x1), /* OFFCORE_REQUESTS_OUTSTANDING */
INTEL_EVENT_CONSTRAINT(0x63, 0x3), /* CACHE_LOCK_CYCLES */
+ INTEL_EVENT_CONSTRAINT(0xb3, 0x1), /* SNOOPQ_REQUEST_OUTSTANDING */
EVENT_CONSTRAINT_END
};
diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c
index 424fc8d..ae85d69 100644
--- a/arch/x86/kernel/cpu/perf_event_p4.c
+++ b/arch/x86/kernel/cpu/perf_event_p4.c
@@ -465,15 +465,21 @@
return rc;
}
-static inline void p4_pmu_clear_cccr_ovf(struct hw_perf_event *hwc)
+static inline int p4_pmu_clear_cccr_ovf(struct hw_perf_event *hwc)
{
- unsigned long dummy;
+ int overflow = 0;
+ u32 low, high;
- rdmsrl(hwc->config_base + hwc->idx, dummy);
- if (dummy & P4_CCCR_OVF) {
+ rdmsr(hwc->config_base + hwc->idx, low, high);
+
+ /* we need to check high bit for unflagged overflows */
+ if ((low & P4_CCCR_OVF) || !(high & (1 << 31))) {
+ overflow = 1;
(void)checking_wrmsrl(hwc->config_base + hwc->idx,
- ((u64)dummy) & ~P4_CCCR_OVF);
+ ((u64)low) & ~P4_CCCR_OVF);
}
+
+ return overflow;
}
static inline void p4_pmu_disable_event(struct perf_event *event)
@@ -584,21 +590,15 @@
WARN_ON_ONCE(hwc->idx != idx);
- /*
- * FIXME: Redundant call, actually not needed
- * but just to check if we're screwed
- */
- p4_pmu_clear_cccr_ovf(hwc);
+ /* it might be unflagged overflow */
+ handled = p4_pmu_clear_cccr_ovf(hwc);
val = x86_perf_event_update(event);
- if (val & (1ULL << (x86_pmu.cntval_bits - 1)))
+ if (!handled && (val & (1ULL << (x86_pmu.cntval_bits - 1))))
continue;
- /*
- * event overflow
- */
- handled = 1;
- data.period = event->hw.last_period;
+ /* event overflow for sure */
+ data.period = event->hw.last_period;
if (!x86_perf_event_set_period(event))
continue;
@@ -670,7 +670,7 @@
/*
* ESCR address hashing is tricky, ESCRs are not sequential
- * in memory but all starts from MSR_P4_BSU_ESCR0 (0x03e0) and
+ * in memory but all starts from MSR_P4_BSU_ESCR0 (0x03a0) and
* the metric between any ESCRs is laid in range [0xa0,0xe1]
*
* so we make ~70% filled hashtable
@@ -735,8 +735,9 @@
{
unsigned int idx = P4_ESCR_MSR_IDX(addr);
- if (unlikely(idx >= P4_ESCR_MSR_TABLE_SIZE ||
- !p4_escr_table[idx])) {
+ if (unlikely(idx >= P4_ESCR_MSR_TABLE_SIZE ||
+ !p4_escr_table[idx] ||
+ p4_escr_table[idx] != addr)) {
WARN_ONCE(1, "P4 PMU: Wrong address passed: %x\n", addr);
return -1;
}
@@ -762,7 +763,7 @@
{
unsigned long used_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
unsigned long escr_mask[BITS_TO_LONGS(P4_ESCR_MSR_TABLE_SIZE)];
- int cpu = raw_smp_processor_id();
+ int cpu = smp_processor_id();
struct hw_perf_event *hwc;
struct p4_event_bind *bind;
unsigned int i, thread, num;
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 8b862d5..1b7b31a 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -170,7 +170,7 @@
cpuid_device_destroy(cpu);
break;
}
- return err ? NOTIFY_BAD : NOTIFY_OK;
+ return notifier_from_errno(err);
}
static struct notifier_block __refdata cpuid_class_cpu_notifier =
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 7bca3c6..0d6fc71 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -729,7 +729,7 @@
struct e820entry *ei = &e820.map[i];
if (ei->type == E820_NVS)
- hibernate_nvs_register(ei->addr, ei->size);
+ suspend_nvs_register(ei->addr, ei->size);
}
return 0;
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index ebdb85c..e5cc7e8 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -18,6 +18,7 @@
#include <asm/apic.h>
#include <asm/iommu.h>
#include <asm/gart.h>
+#include <asm/hpet.h>
static void __init fix_hypertransport_config(int num, int slot, int func)
{
@@ -191,6 +192,21 @@
}
#endif
+/*
+ * Force the read back of the CMP register in hpet_next_event()
+ * to work around the problem that the CMP register write seems to be
+ * delayed. See hpet_next_event() for details.
+ *
+ * We do this on all SMBUS incarnations for now until we have more
+ * information about the affected chipsets.
+ */
+static void __init ati_hpet_bugs(int num, int slot, int func)
+{
+#ifdef CONFIG_HPET_TIMER
+ hpet_readback_cmp = 1;
+#endif
+}
+
#define QFLAG_APPLY_ONCE 0x1
#define QFLAG_APPLIED 0x2
#define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED)
@@ -220,6 +236,8 @@
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
+ { PCI_VENDOR_ID_ATI, PCI_ANY_ID,
+ PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_hpet_bugs },
{}
};
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 0697ff1..4db7c4d 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -571,8 +571,8 @@
* masked off.
*/
sysret_audit:
- movq %rax,%rsi /* second arg, syscall return value */
- cmpq $0,%rax /* is it < 0? */
+ movq RAX-ARGOFFSET(%rsp),%rsi /* second arg, syscall return value */
+ cmpq $0,%rsi /* is it < 0? */
setl %al /* 1 if so, 0 if not */
movzbl %al,%edi /* zero-extend that into %edi */
inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
diff --git a/arch/x86/kernel/init_task.c b/arch/x86/kernel/init_task.c
index 3a54dcb..43e9ccf 100644
--- a/arch/x86/kernel/init_task.c
+++ b/arch/x86/kernel/init_task.c
@@ -34,7 +34,7 @@
/*
* per-CPU TSS segments. Threads are completely 'soft' on Linux,
* no more per-task TSS's. The TSS size is kept cacheline-aligned
- * so they are allowed to end up in the .data.cacheline_aligned
+ * so they are allowed to end up in the .data..cacheline_aligned
* section. Since TSS's are completely CPU-local, we want them
* on exact cacheline boundaries, to eliminate cacheline ping-pong.
*/
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 345a4b1..675879b 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -640,8 +640,8 @@
/* Skip cs, ip, orig_ax and gs. */ \
" subl $16, %esp\n" \
" pushl %fs\n" \
- " pushl %ds\n" \
" pushl %es\n" \
+ " pushl %ds\n" \
" pushl %eax\n" \
" pushl %ebp\n" \
" pushl %edi\n" \
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 5ae5d24..d86dbf7 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -123,7 +123,7 @@
printk(KERN_INFO "I/O APIC #%d Version %d at 0x%X.\n",
m->apicid, m->apicver, m->apicaddr);
- mp_register_ioapic(m->apicid, m->apicaddr, gsi_end + 1);
+ mp_register_ioapic(m->apicid, m->apicaddr, gsi_top);
}
static void print_MP_intsrc_info(struct mpc_intsrc *m)
diff --git a/arch/x86/kernel/mrst.c b/arch/x86/kernel/mrst.c
index e796448..5915e0b 100644
--- a/arch/x86/kernel/mrst.c
+++ b/arch/x86/kernel/mrst.c
@@ -216,6 +216,12 @@
setup_boot_APIC_clock();
};
+/* MID systems don't have i8042 controller */
+static int mrst_i8042_detect(void)
+{
+ return 0;
+}
+
/*
* Moorestown specific x86_init function overrides and early setup
* calls.
@@ -233,6 +239,7 @@
x86_cpuinit.setup_percpu_clockev = mrst_setup_secondary_clock;
x86_platform.calibrate_tsc = mrst_calibrate_tsc;
+ x86_platform.i8042_detect = mrst_i8042_detect;
x86_init.pci.init = pci_mrst_init;
x86_init.pci.fixup_irqs = x86_init_noop;
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 4d4468e..7bf2dc4 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -230,7 +230,7 @@
msr_device_destroy(cpu);
break;
}
- return err ? NOTIFY_BAD : NOTIFY_OK;
+ return notifier_from_errno(err);
}
static struct notifier_block __refdata msr_class_cpu_notifier = {
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index fb99f7e..078d4ec 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -103,11 +103,16 @@
#define PMR_SOFTSTOPFAULT 0x40000000
#define PMR_HARDSTOP 0x20000000
-#define MAX_NUM_OF_PHBS 8 /* how many PHBs in total? */
-#define MAX_NUM_CHASSIS 8 /* max number of chassis */
-/* MAX_PHB_BUS_NUM is the maximal possible dev->bus->number */
-#define MAX_PHB_BUS_NUM (MAX_NUM_OF_PHBS * MAX_NUM_CHASSIS * 2)
-#define PHBS_PER_CALGARY 4
+/*
+ * The maximum PHB bus number.
+ * x3950M2 (rare): 8 chassis, 48 PHBs per chassis = 384
+ * x3950M2: 4 chassis, 48 PHBs per chassis = 192
+ * x3950 (PCIE): 8 chassis, 32 PHBs per chassis = 256
+ * x3950 (PCIX): 8 chassis, 16 PHBs per chassis = 128
+ */
+#define MAX_PHB_BUS_NUM 256
+
+#define PHBS_PER_CALGARY 4
/* register offsets in Calgary's internal register space */
static const unsigned long tar_offsets[] = {
@@ -1051,8 +1056,6 @@
struct iommu_table *tbl;
int ret;
- BUG_ON(dev->bus->number >= MAX_PHB_BUS_NUM);
-
bbar = busno_to_bbar(dev->bus->number);
ret = calgary_setup_tar(dev, bbar);
if (ret)
diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index 7d2829d..a5bc528 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -31,8 +31,6 @@
.free_coherent = swiotlb_free_coherent,
.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
.sync_single_for_device = swiotlb_sync_single_for_device,
- .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
- .sync_single_range_for_device = swiotlb_sync_single_range_for_device,
.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
.sync_sg_for_device = swiotlb_sync_sg_for_device,
.map_sg = swiotlb_map_sg_attrs,
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index e72d3fc..939b9e9 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -498,15 +498,10 @@
* See erratum #27 (Misinterpreted MSI Requests May Result in
* Corrupted LPC DMA Data) in AMD Publication #46837,
* "SB700 Family Product Errata", Rev. 1.0, March 2010.
- *
- * Also force the read back of the CMP register in hpet_next_event()
- * to work around the problem that the CMP register write seems to be
- * delayed. See hpet_next_event() for details.
*/
static void force_disable_hpet_msi(struct pci_dev *unused)
{
hpet_msi_disable = 1;
- hpet_readback_cmp = 1;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 8e1aac8..e3af342 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -228,6 +228,14 @@
DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T5400"),
},
},
+ { /* Handle problems with rebooting on Dell T7400's */
+ .callback = set_bios_reboot,
+ .ident = "Dell Precision T7400",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T7400"),
+ },
+ },
{ /* Handle problems with rebooting on HP laptops */
.callback = set_bios_reboot,
.ident = "HP Compaq Laptop",
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index e802989..b4ae4ac 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -676,6 +676,17 @@
DMI_MATCH(DMI_BOARD_NAME, "DG45FC"),
},
},
+ /*
+ * The Dell Inspiron Mini 1012 has DMI_BIOS_VENDOR = "Dell Inc.", so
+ * match on the product name.
+ */
+ {
+ .callback = dmi_low_memory_corruption,
+ .ident = "Phoenix BIOS",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"),
+ },
+ },
#endif
{}
};
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index ef6370b..a60df9a 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -21,12 +21,6 @@
#include <asm/cpu.h>
#include <asm/stackprotector.h>
-#ifdef CONFIG_DEBUG_PER_CPU_MAPS
-# define DBG(fmt, ...) pr_dbg(fmt, ##__VA_ARGS__)
-#else
-# define DBG(fmt, ...) do { if (0) pr_dbg(fmt, ##__VA_ARGS__); } while (0)
-#endif
-
DEFINE_PER_CPU(int, cpu_number);
EXPORT_PER_CPU_SYMBOL(cpu_number);
@@ -244,10 +238,19 @@
#ifdef CONFIG_NUMA
per_cpu(x86_cpu_to_node_map, cpu) =
early_per_cpu_map(x86_cpu_to_node_map, cpu);
+ /*
+ * Ensure that the boot cpu numa_node is correct when the boot
+ * cpu is on a node that doesn't have memory installed.
+ * Also cpu_up() will call cpu_to_node() for APs when
+ * MEMORY_HOTPLUG is defined, before per_cpu(numa_node) is set
+ * up later with c_init aka intel_init/amd_init.
+ * So set them all (boot cpu and all APs).
+ */
+ set_cpu_numa_node(cpu, early_cpu_to_node(cpu));
#endif
#endif
/*
- * Up to this point, the boot CPU has been using .data.init
+ * Up to this point, the boot CPU has been using .init.data
* area. Reload any changed state for the boot CPU.
*/
if (cpu == boot_cpu_id)
@@ -263,14 +266,6 @@
early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
#endif
-#if defined(CONFIG_X86_64) && defined(CONFIG_NUMA)
- /*
- * make sure boot cpu node_number is right, when boot cpu is on the
- * node that doesn't have mem installed
- */
- per_cpu(node_number, boot_cpu_id) = cpu_to_node(boot_cpu_id);
-#endif
-
/* Setup node to cpumask map */
setup_node_to_cpumask_map();
diff --git a/arch/x86/kernel/sfi.c b/arch/x86/kernel/sfi.c
index 7ded578..cb22acf 100644
--- a/arch/x86/kernel/sfi.c
+++ b/arch/x86/kernel/sfi.c
@@ -93,7 +93,7 @@
pentry = (struct sfi_apic_table_entry *)sb->pentry;
for (i = 0; i < num; i++) {
- mp_register_ioapic(i, pentry->phys_addr, gsi_end + 1);
+ mp_register_ioapic(i, pentry->phys_addr, gsi_top);
pentry++;
}
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 763d815..c4f33b2 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -686,7 +686,7 @@
static void __cpuinit announce_cpu(int cpu, int apicid)
{
static int current_node = -1;
- int node = cpu_to_node(cpu);
+ int node = early_cpu_to_node(cpu);
if (system_state == SYSTEM_BOOTING) {
if (node != current_node) {
@@ -1215,9 +1215,17 @@
if (!num_processors)
num_processors = 1;
- if (setup_possible_cpus == -1)
- possible = num_processors + disabled_cpus;
- else
+ i = setup_max_cpus ?: 1;
+ if (setup_possible_cpus == -1) {
+ possible = num_processors;
+#ifdef CONFIG_HOTPLUG_CPU
+ if (setup_max_cpus)
+ possible += disabled_cpus;
+#else
+ if (possible > i)
+ possible = i;
+#endif
+ } else
possible = setup_possible_cpus;
total_cpus = max_t(int, possible, num_processors + disabled_cpus);
@@ -1230,11 +1238,23 @@
possible = nr_cpu_ids;
}
+#ifdef CONFIG_HOTPLUG_CPU
+ if (!setup_max_cpus)
+#endif
+ if (possible > i) {
+ printk(KERN_WARNING
+ "%d Processors exceeds max_cpus limit of %u\n",
+ possible, setup_max_cpus);
+ possible = i;
+ }
+
printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
possible, max_t(int, possible - num_processors, 0));
for (i = 0; i < possible; i++)
set_cpu_possible(i, true);
+ for (; i < NR_CPUS; i++)
+ set_cpu_possible(i, false);
nr_cpu_ids = possible;
}
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 142d70c..725ef4d 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -526,6 +526,7 @@
dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
{
struct task_struct *tsk = current;
+ int user_icebp = 0;
unsigned long dr6;
int si_code;
@@ -534,6 +535,14 @@
/* Filter out all the reserved bits which are preset to 1 */
dr6 &= ~DR6_RESERVED;
+ /*
+ * If dr6 has no reason to give us about the origin of this trap,
+ * then it's very likely the result of an icebp/int01 trap.
+ * User wants a sigtrap for that.
+ */
+ if (!dr6 && user_mode(regs))
+ user_icebp = 1;
+
/* Catch kmemcheck conditions first of all! */
if ((dr6 & DR_STEP) && kmemcheck_trap(regs))
return;
@@ -575,7 +584,7 @@
regs->flags &= ~X86_EFLAGS_TF;
}
si_code = get_si_code(tsk->thread.debugreg6);
- if (tsk->thread.debugreg6 & (DR_STEP | DR_TRAP_BITS))
+ if (tsk->thread.debugreg6 & (DR_STEP | DR_TRAP_BITS) || user_icebp)
send_sigtrap(tsk, regs, error_code, si_code);
preempt_conditional_cli(regs);
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 2cc2497..d0bb522 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -97,7 +97,7 @@
HEAD_TEXT
#ifdef CONFIG_X86_32
. = ALIGN(PAGE_SIZE);
- *(.text.page_aligned)
+ *(.text..page_aligned)
#endif
. = ALIGN(8);
_stext = .;
@@ -305,7 +305,7 @@
. = ALIGN(PAGE_SIZE);
.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
__bss_start = .;
- *(.bss.page_aligned)
+ *(.bss..page_aligned)
*(.bss)
. = ALIGN(4);
__bss_stop = .;
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 61a1e8c..cd6da6b 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -5,6 +5,7 @@
*/
#include <linux/init.h>
#include <linux/ioport.h>
+#include <linux/module.h>
#include <asm/bios_ebda.h>
#include <asm/paravirt.h>
@@ -85,6 +86,7 @@
};
static void default_nmi_init(void) { };
+static int default_i8042_detect(void) { return 1; };
struct x86_platform_ops x86_platform = {
.calibrate_tsc = native_calibrate_tsc,
@@ -92,5 +94,8 @@
.set_wallclock = mach_set_rtc_mmss,
.iommu_shutdown = iommu_shutdown_noop,
.is_untracked_pat_range = is_ISA_range,
- .nmi_init = default_nmi_init
+ .nmi_init = default_nmi_init,
+ .i8042_detect = default_i8042_detect
};
+
+EXPORT_SYMBOL_GPL(x86_platform);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 81563e7..b1ed0a1 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1815,6 +1815,9 @@
spte |= PT_WRITABLE_MASK;
+ if (!tdp_enabled && !(pte_access & ACC_WRITE_MASK))
+ spte &= ~PT_USER_MASK;
+
/*
* Optimization: for pte sync, if spte was writable the hash
* lookup is unnecessary (and expensive). Write protection
@@ -1870,10 +1873,14 @@
child = page_header(pte & PT64_BASE_ADDR_MASK);
mmu_page_remove_parent_pte(child, sptep);
+ __set_spte(sptep, shadow_trap_nonpresent_pte);
+ kvm_flush_remote_tlbs(vcpu->kvm);
} else if (pfn != spte_to_pfn(*sptep)) {
pgprintk("hfn old %lx new %lx\n",
spte_to_pfn(*sptep), pfn);
rmap_remove(vcpu->kvm, sptep);
+ __set_spte(sptep, shadow_trap_nonpresent_pte);
+ kvm_flush_remote_tlbs(vcpu->kvm);
} else
was_rmapped = 1;
}
@@ -2919,7 +2926,7 @@
return kvm_mmu_zap_page(kvm, page) + 1;
}
-static int mmu_shrink(int nr_to_scan, gfp_t gfp_mask)
+static int mmu_shrink(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
{
struct kvm *kvm;
struct kvm *kvm_freed = NULL;
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 96dc232..ce438e0 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -28,6 +28,7 @@
#include <linux/ftrace_event.h>
#include <linux/slab.h>
+#include <asm/tlbflush.h>
#include <asm/desc.h>
#include <asm/virtext.h>
@@ -56,6 +57,8 @@
#define DEBUGCTL_RESERVED_BITS (~(0x3fULL))
+static bool erratum_383_found __read_mostly;
+
static const u32 host_save_user_msrs[] = {
#ifdef CONFIG_X86_64
MSR_STAR, MSR_LSTAR, MSR_CSTAR, MSR_SYSCALL_MASK, MSR_KERNEL_GS_BASE,
@@ -374,6 +377,31 @@
svm->vmcb->control.event_inj_err = error_code;
}
+static void svm_init_erratum_383(void)
+{
+ u32 low, high;
+ int err;
+ u64 val;
+
+ /* Only Fam10h is affected */
+ if (boot_cpu_data.x86 != 0x10)
+ return;
+
+ /* Use _safe variants to not break nested virtualization */
+ val = native_read_msr_safe(MSR_AMD64_DC_CFG, &err);
+ if (err)
+ return;
+
+ val |= (1ULL << 47);
+
+ low = lower_32_bits(val);
+ high = upper_32_bits(val);
+
+ native_write_msr_safe(MSR_AMD64_DC_CFG, low, high);
+
+ erratum_383_found = true;
+}
+
static int has_svm(void)
{
const char *msg;
@@ -429,6 +457,8 @@
wrmsrl(MSR_VM_HSAVE_PA, page_to_pfn(sd->save_area) << PAGE_SHIFT);
+ svm_init_erratum_383();
+
return 0;
}
@@ -1410,8 +1440,59 @@
return 1;
}
-static int mc_interception(struct vcpu_svm *svm)
+static bool is_erratum_383(void)
{
+ int err, i;
+ u64 value;
+
+ if (!erratum_383_found)
+ return false;
+
+ value = native_read_msr_safe(MSR_IA32_MC0_STATUS, &err);
+ if (err)
+ return false;
+
+ /* Bit 62 may or may not be set for this mce */
+ value &= ~(1ULL << 62);
+
+ if (value != 0xb600000000010015ULL)
+ return false;
+
+ /* Clear MCi_STATUS registers */
+ for (i = 0; i < 6; ++i)
+ native_write_msr_safe(MSR_IA32_MCx_STATUS(i), 0, 0);
+
+ value = native_read_msr_safe(MSR_IA32_MCG_STATUS, &err);
+ if (!err) {
+ u32 low, high;
+
+ value &= ~(1ULL << 2);
+ low = lower_32_bits(value);
+ high = upper_32_bits(value);
+
+ native_write_msr_safe(MSR_IA32_MCG_STATUS, low, high);
+ }
+
+ /* Flush tlb to evict multi-match entries */
+ __flush_tlb_all();
+
+ return true;
+}
+
+static void svm_handle_mce(struct vcpu_svm *svm)
+{
+ if (is_erratum_383()) {
+ /*
+ * Erratum 383 triggered. Guest state is corrupt so kill the
+ * guest.
+ */
+ pr_err("KVM: Guest triggered AMD Erratum 383\n");
+
+ set_bit(KVM_REQ_TRIPLE_FAULT, &svm->vcpu.requests);
+
+ return;
+ }
+
/*
* On an #MC intercept the MCE handler is not called automatically in
* the host. So do it by hand here.
@@ -1420,6 +1501,11 @@
"int $0x12\n");
/* not sure if we ever come back to this point */
+ return;
+}
+
+static int mc_interception(struct vcpu_svm *svm)
+{
return 1;
}
@@ -3088,6 +3174,14 @@
vcpu->arch.regs_avail &= ~(1 << VCPU_EXREG_PDPTR);
vcpu->arch.regs_dirty &= ~(1 << VCPU_EXREG_PDPTR);
}
+
+ /*
+ * We need to handle MC intercepts here before the vcpu has a chance to
+ * change the physical cpu
+ */
+ if (unlikely(svm->vmcb->control.exit_code ==
+ SVM_EXIT_EXCP_BASE + MC_VECTOR))
+ svm_handle_mce(svm);
}
#undef R
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 859a01a..ee03679 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1744,18 +1744,15 @@
(guest_tr_ar & ~AR_TYPE_MASK)
| AR_TYPE_BUSY_64_TSS);
}
- vcpu->arch.efer |= EFER_LMA;
- vmx_set_efer(vcpu, vcpu->arch.efer);
+ vmx_set_efer(vcpu, vcpu->arch.efer | EFER_LMA);
}
static void exit_lmode(struct kvm_vcpu *vcpu)
{
- vcpu->arch.efer &= ~EFER_LMA;
-
vmcs_write32(VM_ENTRY_CONTROLS,
vmcs_read32(VM_ENTRY_CONTROLS)
& ~VM_ENTRY_IA32E_MODE);
- vmx_set_efer(vcpu, vcpu->arch.efer);
+ vmx_set_efer(vcpu, vcpu->arch.efer & ~EFER_LMA);
}
#endif
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 2bdf628..9257510 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -1390,7 +1390,6 @@
#endif
#ifdef CONFIG_ACPI
acpi_disabled = 1;
- acpi_ht = 0;
#endif
/*
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 550df48..787c52c 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -3,12 +3,6 @@
#include <linux/module.h>
#include <linux/bootmem.h>
-#ifdef CONFIG_DEBUG_PER_CPU_MAPS
-# define DBG(x...) printk(KERN_DEBUG x)
-#else
-# define DBG(x...)
-#endif
-
/*
* Which logical CPUs are on which nodes
*/
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index 8948f47..a7bcc23 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -33,9 +33,6 @@
static unsigned long __initdata nodemap_addr;
static unsigned long __initdata nodemap_size;
-DEFINE_PER_CPU(int, node_number) = 0;
-EXPORT_PER_CPU_SYMBOL(node_number);
-
/*
* Map cpu index to node index
*/
@@ -809,7 +806,7 @@
per_cpu(x86_cpu_to_node_map, cpu) = node;
if (node != NUMA_NO_NODE)
- per_cpu(node_number, cpu) = node;
+ set_cpu_numa_node(cpu, node);
}
void __cpuinit numa_clear_node(int cpu)
@@ -867,7 +864,7 @@
numa_set_cpumask(cpu, 0);
}
-int cpu_to_node(int cpu)
+int __cpu_to_node(int cpu)
{
if (early_per_cpu_ptr(x86_cpu_to_node_map)) {
printk(KERN_WARNING
@@ -877,7 +874,7 @@
}
return per_cpu(x86_cpu_to_node_map, cpu);
}
-EXPORT_SYMBOL(cpu_to_node);
+EXPORT_SYMBOL(__cpu_to_node);
/*
* Same function as cpu_to_node() but used if called before the
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index bbe5502..64121a1 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -302,7 +302,7 @@
return -EINVAL;
}
- new = kmalloc(sizeof(struct memtype), GFP_KERNEL);
+ new = kzalloc(sizeof(struct memtype), GFP_KERNEL);
if (!new)
return -ENOMEM;
@@ -336,6 +336,7 @@
{
int err = -EINVAL;
int is_range_ram;
+ struct memtype *entry;
if (!pat_enabled)
return 0;
@@ -355,17 +356,20 @@
}
spin_lock(&memtype_lock);
- err = rbt_memtype_erase(start, end);
+ entry = rbt_memtype_erase(start, end);
spin_unlock(&memtype_lock);
- if (err) {
+ if (!entry) {
printk(KERN_INFO "%s:%d freeing invalid memtype %Lx-%Lx\n",
current->comm, current->pid, start, end);
+ return -EINVAL;
}
+ kfree(entry);
+
dprintk("free_memtype request 0x%Lx-0x%Lx\n", start, end);
- return err;
+ return 0;
}
diff --git a/arch/x86/mm/pat_internal.h b/arch/x86/mm/pat_internal.h
index 4f39eef..77e5ba1 100644
--- a/arch/x86/mm/pat_internal.h
+++ b/arch/x86/mm/pat_internal.h
@@ -28,15 +28,15 @@
#ifdef CONFIG_X86_PAT
extern int rbt_memtype_check_insert(struct memtype *new,
unsigned long *new_type);
-extern int rbt_memtype_erase(u64 start, u64 end);
+extern struct memtype *rbt_memtype_erase(u64 start, u64 end);
extern struct memtype *rbt_memtype_lookup(u64 addr);
extern int rbt_memtype_copy_nth_element(struct memtype *out, loff_t pos);
#else
static inline int rbt_memtype_check_insert(struct memtype *new,
unsigned long *new_type)
{ return 0; }
-static inline int rbt_memtype_erase(u64 start, u64 end)
-{ return 0; }
+static inline struct memtype *rbt_memtype_erase(u64 start, u64 end)
+{ return NULL; }
static inline struct memtype *rbt_memtype_lookup(u64 addr)
{ return NULL; }
static inline int rbt_memtype_copy_nth_element(struct memtype *out, loff_t pos)
diff --git a/arch/x86/mm/pat_rbtree.c b/arch/x86/mm/pat_rbtree.c
index 07de4cb..8acaddd 100644
--- a/arch/x86/mm/pat_rbtree.c
+++ b/arch/x86/mm/pat_rbtree.c
@@ -34,8 +34,7 @@
* memtype_lock protects the rbtree.
*/
-static void memtype_rb_augment_cb(struct rb_node *node);
-static struct rb_root memtype_rbroot = RB_AUGMENT_ROOT(&memtype_rb_augment_cb);
+static struct rb_root memtype_rbroot = RB_ROOT;
static int is_node_overlap(struct memtype *node, u64 start, u64 end)
{
@@ -56,7 +55,7 @@
}
/* Update 'subtree_max_end' for a node, based on node and its children */
-static void update_node_max_end(struct rb_node *node)
+static void memtype_rb_augment_cb(struct rb_node *node, void *__unused)
{
struct memtype *data;
u64 max_end, child_max_end;
@@ -78,25 +77,6 @@
data->subtree_max_end = max_end;
}
-/* Update 'subtree_max_end' for a node and all its ancestors */
-static void update_path_max_end(struct rb_node *node)
-{
- u64 old_max_end, new_max_end;
-
- while (node) {
- struct memtype *data = container_of(node, struct memtype, rb);
-
- old_max_end = data->subtree_max_end;
- update_node_max_end(node);
- new_max_end = data->subtree_max_end;
-
- if (new_max_end == old_max_end)
- break;
-
- node = rb_parent(node);
- }
-}
-
/* Find the first (lowest start addr) overlapping range from rb tree */
static struct memtype *memtype_rb_lowest_match(struct rb_root *root,
u64 start, u64 end)
@@ -190,12 +170,6 @@
return -EBUSY;
}
-static void memtype_rb_augment_cb(struct rb_node *node)
-{
- if (node)
- update_path_max_end(node);
-}
-
static void memtype_rb_insert(struct rb_root *root, struct memtype *newdata)
{
struct rb_node **node = &(root->rb_node);
@@ -213,6 +187,7 @@
rb_link_node(&newdata->rb, parent, node);
rb_insert_color(&newdata->rb, root);
+ rb_augment_insert(&newdata->rb, memtype_rb_augment_cb, NULL);
}
int rbt_memtype_check_insert(struct memtype *new, unsigned long *ret_type)
@@ -226,21 +201,26 @@
if (ret_type)
new->type = *ret_type;
+ new->subtree_max_end = new->end;
memtype_rb_insert(&memtype_rbroot, new);
}
return err;
}
-int rbt_memtype_erase(u64 start, u64 end)
+struct memtype *rbt_memtype_erase(u64 start, u64 end)
{
+ struct rb_node *deepest;
struct memtype *data;
data = memtype_rb_exact_match(&memtype_rbroot, start, end);
if (!data)
- return -EINVAL;
+ goto out;
+ deepest = rb_augment_erase_begin(&data->rb);
rb_erase(&data->rb, &memtype_rbroot);
- return 0;
+ rb_augment_erase_end(deepest, memtype_rb_augment_cb, NULL);
+out:
+ return data;
}
struct memtype *rbt_memtype_lookup(u64 addr)
diff --git a/arch/x86/mm/pf_in.c b/arch/x86/mm/pf_in.c
index df3d5c8..308e325 100644
--- a/arch/x86/mm/pf_in.c
+++ b/arch/x86/mm/pf_in.c
@@ -34,7 +34,7 @@
/* IA32 Manual 3, 2-1 */
static unsigned char prefix_codes[] = {
0xF0, 0xF2, 0xF3, 0x2E, 0x36, 0x3E, 0x26, 0x64,
- 0x65, 0x2E, 0x3E, 0x66, 0x67
+ 0x65, 0x66, 0x67
};
/* IA32 Manual 3, 3-432*/
static unsigned int reg_rop[] = {
diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c
index 7928540..cac7184 100644
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -9,7 +9,6 @@
#include <linux/pagemap.h>
#include <linux/spinlock.h>
#include <linux/module.h>
-#include <linux/quicklist.h>
#include <asm/system.h>
#include <asm/pgtable.h>
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 31930fd..2ec04c4 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -207,10 +207,9 @@
if (!info.res)
goto res_alloc_fail;
- info.name = kmalloc(16, GFP_KERNEL);
+ info.name = kasprintf(GFP_KERNEL, "PCI Bus %04x:%02x", domain, busnum);
if (!info.name)
goto name_alloc_fail;
- sprintf(info.name, "PCI Bus %04x:%02x", domain, busnum);
info.res_num = 0;
acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
@@ -224,8 +223,11 @@
return;
}
-struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int domain, int busnum)
+struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_pci_root *root)
{
+ struct acpi_device *device = root->device;
+ int domain = root->segment;
+ int busnum = root->secondary.start;
struct pci_bus *bus;
struct pci_sysdata *sd;
int node;
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 97da2ba..5525309 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -96,6 +96,7 @@
* the fact the PCI specs explicitly allow address decoders to be
* shared between expansion ROMs and other resource regions, it's
* at least dangerous)
+ * - bad resource sizes or overlaps with other regions
*
* Our solution:
* (1) Allocate resources for all buses behind PCI-to-PCI bridges.
@@ -136,6 +137,7 @@
* child resource allocations in this
* range.
*/
+ r->start = r->end = 0;
r->flags = 0;
}
}
@@ -182,6 +184,7 @@
idx, r, disabled, pass);
if (pci_claim_resource(dev, idx) < 0) {
/* We'll assign a new address later */
+ dev->fw_addr[idx] = r->start;
r->end -= r->start;
r->start = 0;
}
diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c
index 0db5eaf..8d460ea 100644
--- a/arch/x86/pci/legacy.c
+++ b/arch/x86/pci/legacy.c
@@ -11,28 +11,14 @@
*/
static void __devinit pcibios_fixup_peer_bridges(void)
{
- int n, devfn;
- long node;
+ int n;
if (pcibios_last_bus <= 0 || pcibios_last_bus > 0xff)
return;
DBG("PCI: Peer bridge fixup\n");
- for (n=0; n <= pcibios_last_bus; n++) {
- u32 l;
- if (pci_find_bus(0, n))
- continue;
- node = get_mp_bus_to_node(n);
- for (devfn = 0; devfn < 256; devfn += 8) {
- if (!raw_pci_read(0, n, devfn, PCI_VENDOR_ID, 2, &l) &&
- l != 0x0000 && l != 0xffff) {
- DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l);
- printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n);
- pci_scan_bus_on_node(n, &pci_root_ops, node);
- break;
- }
- }
- }
+ for (n=0; n <= pcibios_last_bus; n++)
+ pcibios_scan_specific_bus(n);
}
int __init pci_legacy_init(void)
@@ -50,6 +36,28 @@
return 0;
}
+void pcibios_scan_specific_bus(int busn)
+{
+ int devfn;
+ long node;
+ u32 l;
+
+ if (pci_find_bus(0, busn))
+ return;
+
+ node = get_mp_bus_to_node(busn);
+ for (devfn = 0; devfn < 256; devfn += 8) {
+ if (!raw_pci_read(0, busn, devfn, PCI_VENDOR_ID, 2, &l) &&
+ l != 0x0000 && l != 0xffff) {
+ DBG("Found device at %02x:%02x [%04x]\n", busn, devfn, l);
+ printk(KERN_INFO "PCI: Discovered peer bus %02x\n", busn);
+ pci_scan_bus_on_node(busn, &pci_root_ops, node);
+ return;
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(pcibios_scan_specific_bus);
+
int __init pci_subsys_init(void)
{
/*
diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c
index 7ef3a27..cb29191 100644
--- a/arch/x86/pci/mrst.c
+++ b/arch/x86/pci/mrst.c
@@ -66,8 +66,9 @@
devfn, pos, 4, &pcie_cap))
return 0;
- if (pcie_cap == 0xffffffff)
- return 0;
+ if (PCI_EXT_CAP_ID(pcie_cap) == 0x0000 ||
+ PCI_EXT_CAP_ID(pcie_cap) == 0xffff)
+ break;
if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) {
raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
@@ -76,7 +77,7 @@
return pos;
}
- pos = pcie_cap >> 20;
+ pos = PCI_EXT_CAP_NEXT(pcie_cap);
}
return 0;
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 0a979f3..1290ba5 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -105,6 +105,8 @@
ctxt->cr4 = read_cr4();
ctxt->cr8 = read_cr8();
#endif
+ ctxt->misc_enable_saved = !rdmsrl_safe(MSR_IA32_MISC_ENABLE,
+ &ctxt->misc_enable);
}
/* Needed by apm.c */
@@ -152,6 +154,8 @@
*/
static void __restore_processor_state(struct saved_context *ctxt)
{
+ if (ctxt->misc_enable_saved)
+ wrmsrl(MSR_IA32_MISC_ENABLE, ctxt->misc_enable);
/*
* control registers
*/
diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c
index 987267f..a9c6611 100644
--- a/arch/x86/xen/suspend.c
+++ b/arch/x86/xen/suspend.c
@@ -60,6 +60,6 @@
void xen_arch_resume(void)
{
- smp_call_function(xen_vcpu_notify_restore,
- (void *)CLOCK_EVT_NOTIFY_RESUME, 1);
+ on_each_cpu(xen_vcpu_notify_restore,
+ (void *)CLOCK_EVT_NOTIFY_RESUME, 1);
}
diff --git a/arch/xtensa/include/asm/scatterlist.h b/arch/xtensa/include/asm/scatterlist.h
index 810080b..b1f9fdc 100644
--- a/arch/xtensa/include/asm/scatterlist.h
+++ b/arch/xtensa/include/asm/scatterlist.h
@@ -11,28 +11,7 @@
#ifndef _XTENSA_SCATTERLIST_H
#define _XTENSA_SCATTERLIST_H
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset;
- dma_addr_t dma_address;
- unsigned int length;
-};
-
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->length)
-
+#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (~0UL)
diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c
index bc07333..e367e30 100644
--- a/arch/xtensa/mm/fault.c
+++ b/arch/xtensa/mm/fault.c
@@ -105,7 +105,6 @@
* make sure we exit gracefully rather than endlessly redo
* the fault.
*/
-survive:
fault = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0);
if (unlikely(fault & VM_FAULT_ERROR)) {
if (fault & VM_FAULT_OOM)
@@ -146,15 +145,10 @@
*/
out_of_memory:
up_read(&mm->mmap_sem);
- if (is_global_init(current)) {
- yield();
- down_read(&mm->mmap_sem);
- goto survive;
- }
- printk("VM: killing process %s\n", current->comm);
- if (user_mode(regs))
- do_group_exit(SIGKILL);
- bad_page_fault(regs, address, SIGKILL);
+ if (!user_mode(regs))
+ bad_page_fault(regs, address, SIGKILL);
+ else
+ pagefault_out_of_memory();
return;
do_sigbus:
diff --git a/block/blk-core.c b/block/blk-core.c
index 3bc5579..f0640d7 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -467,6 +467,9 @@
{
struct request_list *rl = &q->rq;
+ if (unlikely(rl->rq_pool))
+ return 0;
+
rl->count[BLK_RW_SYNC] = rl->count[BLK_RW_ASYNC] = 0;
rl->starved[BLK_RW_SYNC] = rl->starved[BLK_RW_ASYNC] = 0;
rl->elvpriv = 0;
@@ -570,9 +573,17 @@
struct request_queue *
blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id)
{
- struct request_queue *q = blk_alloc_queue_node(GFP_KERNEL, node_id);
+ struct request_queue *uninit_q, *q;
- return blk_init_allocated_queue_node(q, rfn, lock, node_id);
+ uninit_q = blk_alloc_queue_node(GFP_KERNEL, node_id);
+ if (!uninit_q)
+ return NULL;
+
+ q = blk_init_allocated_queue_node(uninit_q, rfn, lock, node_id);
+ if (!q)
+ blk_cleanup_queue(uninit_q);
+
+ return q;
}
EXPORT_SYMBOL(blk_init_queue_node);
@@ -592,10 +603,8 @@
return NULL;
q->node = node_id;
- if (blk_init_free_list(q)) {
- kmem_cache_free(blk_requestq_cachep, q);
+ if (blk_init_free_list(q))
return NULL;
- }
q->request_fn = rfn;
q->prep_rq_fn = NULL;
@@ -618,7 +627,6 @@
return q;
}
- blk_put_queue(q);
return NULL;
}
EXPORT_SYMBOL(blk_init_allocated_queue_node);
@@ -1141,13 +1149,10 @@
else
req->cmd_flags |= bio->bi_rw & REQ_FAILFAST_MASK;
- if (unlikely(bio_rw_flagged(bio, BIO_RW_DISCARD))) {
+ if (bio_rw_flagged(bio, BIO_RW_DISCARD))
req->cmd_flags |= REQ_DISCARD;
- if (bio_rw_flagged(bio, BIO_RW_BARRIER))
- req->cmd_flags |= REQ_SOFTBARRIER;
- } else if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER)))
+ if (bio_rw_flagged(bio, BIO_RW_BARRIER))
req->cmd_flags |= REQ_HARDBARRIER;
-
if (bio_rw_flagged(bio, BIO_RW_SYNCIO))
req->cmd_flags |= REQ_RW_SYNC;
if (bio_rw_flagged(bio, BIO_RW_META))
@@ -1578,7 +1583,7 @@
* If it's a regular read/write or a barrier with data attached,
* go through the normal accounting stuff before submission.
*/
- if (bio_has_data(bio)) {
+ if (bio_has_data(bio) && !(rw & (1 << BIO_RW_DISCARD))) {
if (rw & WRITE) {
count_vm_events(PGPGOUT, count);
} else {
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index ed897b5..7982b83 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -14,7 +14,7 @@
#include <linux/rbtree.h>
#include <linux/ioprio.h>
#include <linux/blktrace_api.h>
-#include "blk-cgroup.h"
+#include "cfq.h"
/*
* tunables
@@ -64,6 +64,9 @@
static struct completion *ioc_gone;
static DEFINE_SPINLOCK(ioc_gone_lock);
+static DEFINE_SPINLOCK(cic_index_lock);
+static DEFINE_IDA(cic_index_ida);
+
#define CFQ_PRIO_LISTS IOPRIO_BE_NR
#define cfq_class_idle(cfqq) ((cfqq)->ioprio_class == IOPRIO_CLASS_IDLE)
#define cfq_class_rt(cfqq) ((cfqq)->ioprio_class == IOPRIO_CLASS_RT)
@@ -271,6 +274,7 @@
unsigned int cfq_latency;
unsigned int cfq_group_isolation;
+ unsigned int cic_index;
struct list_head cic_list;
/*
@@ -430,6 +434,24 @@
cic->cfqq[is_sync] = cfqq;
}
+#define CIC_DEAD_KEY 1ul
+#define CIC_DEAD_INDEX_SHIFT 1
+
+static inline void *cfqd_dead_key(struct cfq_data *cfqd)
+{
+ return (void *)(cfqd->cic_index << CIC_DEAD_INDEX_SHIFT | CIC_DEAD_KEY);
+}
+
+static inline struct cfq_data *cic_to_cfqd(struct cfq_io_context *cic)
+{
+ struct cfq_data *cfqd = cic->key;
+
+ if (unlikely((unsigned long) cfqd & CIC_DEAD_KEY))
+ return NULL;
+
+ return cfqd;
+}
+
/*
* We regard a request as SYNC, if it's either a read or has the SYNC bit
* set (in which case it could also be direct WRITE).
@@ -857,7 +879,7 @@
if (!RB_EMPTY_NODE(&cfqg->rb_node))
cfq_rb_erase(&cfqg->rb_node, st);
cfqg->saved_workload_slice = 0;
- blkiocg_update_dequeue_stats(&cfqg->blkg, 1);
+ cfq_blkiocg_update_dequeue_stats(&cfqg->blkg, 1);
}
static inline unsigned int cfq_cfqq_slice_usage(struct cfq_queue *cfqq)
@@ -917,8 +939,8 @@
cfq_log_cfqg(cfqd, cfqg, "served: vt=%llu min_vt=%llu", cfqg->vdisktime,
st->min_vdisktime);
- blkiocg_update_timeslice_used(&cfqg->blkg, used_sl);
- blkiocg_set_start_empty_time(&cfqg->blkg);
+ cfq_blkiocg_update_timeslice_used(&cfqg->blkg, used_sl);
+ cfq_blkiocg_set_start_empty_time(&cfqg->blkg);
}
#ifdef CONFIG_CFQ_GROUP_IOSCHED
@@ -973,7 +995,7 @@
/* Add group onto cgroup list */
sscanf(dev_name(bdi->dev), "%u:%u", &major, &minor);
- blkiocg_add_blkio_group(blkcg, &cfqg->blkg, (void *)cfqd,
+ cfq_blkiocg_add_blkio_group(blkcg, &cfqg->blkg, (void *)cfqd,
MKDEV(major, minor));
cfqg->weight = blkcg_get_weight(blkcg, cfqg->blkg.dev);
@@ -1057,7 +1079,7 @@
* it from cgroup list, then it will take care of destroying
* cfqg also.
*/
- if (!blkiocg_del_blkio_group(&cfqg->blkg))
+ if (!cfq_blkiocg_del_blkio_group(&cfqg->blkg))
cfq_destroy_cfqg(cfqd, cfqg);
}
}
@@ -1399,10 +1421,10 @@
{
elv_rb_del(&cfqq->sort_list, rq);
cfqq->queued[rq_is_sync(rq)]--;
- blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq),
- rq_is_sync(rq));
+ cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg,
+ rq_data_dir(rq), rq_is_sync(rq));
cfq_add_rq_rb(rq);
- blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
+ cfq_blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
&cfqq->cfqd->serving_group->blkg, rq_data_dir(rq),
rq_is_sync(rq));
}
@@ -1460,8 +1482,8 @@
cfq_del_rq_rb(rq);
cfqq->cfqd->rq_queued--;
- blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq),
- rq_is_sync(rq));
+ cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg,
+ rq_data_dir(rq), rq_is_sync(rq));
if (rq_is_meta(rq)) {
WARN_ON(!cfqq->meta_pending);
cfqq->meta_pending--;
@@ -1496,8 +1518,8 @@
static void cfq_bio_merged(struct request_queue *q, struct request *req,
struct bio *bio)
{
- blkiocg_update_io_merged_stats(&(RQ_CFQG(req))->blkg, bio_data_dir(bio),
- cfq_bio_sync(bio));
+ cfq_blkiocg_update_io_merged_stats(&(RQ_CFQG(req))->blkg,
+ bio_data_dir(bio), cfq_bio_sync(bio));
}
static void
@@ -1517,8 +1539,8 @@
if (cfqq->next_rq == next)
cfqq->next_rq = rq;
cfq_remove_request(next);
- blkiocg_update_io_merged_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(next),
- rq_is_sync(next));
+ cfq_blkiocg_update_io_merged_stats(&(RQ_CFQG(rq))->blkg,
+ rq_data_dir(next), rq_is_sync(next));
}
static int cfq_allow_merge(struct request_queue *q, struct request *rq,
@@ -1549,7 +1571,7 @@
static inline void cfq_del_timer(struct cfq_data *cfqd, struct cfq_queue *cfqq)
{
del_timer(&cfqd->idle_slice_timer);
- blkiocg_update_idle_time_stats(&cfqq->cfqg->blkg);
+ cfq_blkiocg_update_idle_time_stats(&cfqq->cfqg->blkg);
}
static void __cfq_set_active_queue(struct cfq_data *cfqd,
@@ -1558,7 +1580,7 @@
if (cfqq) {
cfq_log_cfqq(cfqd, cfqq, "set_active wl_prio:%d wl_type:%d",
cfqd->serving_prio, cfqd->serving_type);
- blkiocg_update_avg_queue_size_stats(&cfqq->cfqg->blkg);
+ cfq_blkiocg_update_avg_queue_size_stats(&cfqq->cfqg->blkg);
cfqq->slice_start = 0;
cfqq->dispatch_start = jiffies;
cfqq->allocated_slice = 0;
@@ -1889,7 +1911,7 @@
sl = cfqd->cfq_slice_idle;
mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
- blkiocg_update_set_idle_time_stats(&cfqq->cfqg->blkg);
+ cfq_blkiocg_update_set_idle_time_stats(&cfqq->cfqg->blkg);
cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu", sl);
}
@@ -1909,7 +1931,7 @@
elv_dispatch_sort(q, rq);
cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]++;
- blkiocg_update_dispatch_stats(&cfqq->cfqg->blkg, blk_rq_bytes(rq),
+ cfq_blkiocg_update_dispatch_stats(&cfqq->cfqg->blkg, blk_rq_bytes(rq),
rq_data_dir(rq), rq_is_sync(rq));
}
@@ -1964,6 +1986,15 @@
int process_refs, new_process_refs;
struct cfq_queue *__cfqq;
+ /*
+ * If there are no process references on the new_cfqq, then it is
+ * unsafe to follow the ->new_cfqq chain as other cfqq's in the
+ * chain may have dropped their last reference (not just their
+ * last process reference).
+ */
+ if (!cfqq_process_refs(new_cfqq))
+ return;
+
/* Avoid a circular list and skip interim queue merges */
while ((__cfqq = new_cfqq->new_cfqq)) {
if (__cfqq == cfqq)
@@ -1972,17 +2003,17 @@
}
process_refs = cfqq_process_refs(cfqq);
+ new_process_refs = cfqq_process_refs(new_cfqq);
/*
* If the process for the cfqq has gone away, there is no
* sense in merging the queues.
*/
- if (process_refs == 0)
+ if (process_refs == 0 || new_process_refs == 0)
return;
/*
* Merge in the direction of the lesser amount of work.
*/
- new_process_refs = cfqq_process_refs(new_cfqq);
if (new_process_refs >= process_refs) {
cfqq->new_cfqq = new_cfqq;
atomic_add(process_refs, &new_cfqq->ref);
@@ -2510,11 +2541,12 @@
static void cic_free_func(struct io_context *ioc, struct cfq_io_context *cic)
{
unsigned long flags;
+ unsigned long dead_key = (unsigned long) cic->key;
- BUG_ON(!cic->dead_key);
+ BUG_ON(!(dead_key & CIC_DEAD_KEY));
spin_lock_irqsave(&ioc->lock, flags);
- radix_tree_delete(&ioc->radix_root, cic->dead_key);
+ radix_tree_delete(&ioc->radix_root, dead_key >> CIC_DEAD_INDEX_SHIFT);
hlist_del_rcu(&cic->cic_list);
spin_unlock_irqrestore(&ioc->lock, flags);
@@ -2537,15 +2569,10 @@
__call_for_each_cic(ioc, cic_free_func);
}
-static void cfq_exit_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq)
+static void cfq_put_cooperator(struct cfq_queue *cfqq)
{
struct cfq_queue *__cfqq, *next;
- if (unlikely(cfqq == cfqd->active_queue)) {
- __cfq_slice_expired(cfqd, cfqq, 0);
- cfq_schedule_dispatch(cfqd);
- }
-
/*
* If this queue was scheduled to merge with another queue, be
* sure to drop the reference taken on that queue (and others in
@@ -2561,6 +2588,16 @@
cfq_put_queue(__cfqq);
__cfqq = next;
}
+}
+
+static void cfq_exit_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq)
+{
+ if (unlikely(cfqq == cfqd->active_queue)) {
+ __cfq_slice_expired(cfqd, cfqq, 0);
+ cfq_schedule_dispatch(cfqd);
+ }
+
+ cfq_put_cooperator(cfqq);
cfq_put_queue(cfqq);
}
@@ -2573,11 +2610,10 @@
list_del_init(&cic->queue_list);
/*
- * Make sure key == NULL is seen for dead queues
+ * Make sure dead mark is seen for dead queues
*/
smp_wmb();
- cic->dead_key = (unsigned long) cic->key;
- cic->key = NULL;
+ cic->key = cfqd_dead_key(cfqd);
if (ioc->ioc_data == cic)
rcu_assign_pointer(ioc->ioc_data, NULL);
@@ -2596,7 +2632,7 @@
static void cfq_exit_single_io_context(struct io_context *ioc,
struct cfq_io_context *cic)
{
- struct cfq_data *cfqd = cic->key;
+ struct cfq_data *cfqd = cic_to_cfqd(cic);
if (cfqd) {
struct request_queue *q = cfqd->queue;
@@ -2609,7 +2645,7 @@
* race between exiting task and queue
*/
smp_read_barrier_depends();
- if (cic->key)
+ if (cic->key == cfqd)
__cfq_exit_single_io_context(cfqd, cic);
spin_unlock_irqrestore(q->queue_lock, flags);
@@ -2689,7 +2725,7 @@
static void changed_ioprio(struct io_context *ioc, struct cfq_io_context *cic)
{
- struct cfq_data *cfqd = cic->key;
+ struct cfq_data *cfqd = cic_to_cfqd(cic);
struct cfq_queue *cfqq;
unsigned long flags;
@@ -2746,7 +2782,7 @@
static void changed_cgroup(struct io_context *ioc, struct cfq_io_context *cic)
{
struct cfq_queue *sync_cfqq = cic_to_cfqq(cic, 1);
- struct cfq_data *cfqd = cic->key;
+ struct cfq_data *cfqd = cic_to_cfqd(cic);
unsigned long flags;
struct request_queue *q;
@@ -2883,12 +2919,13 @@
unsigned long flags;
WARN_ON(!list_empty(&cic->queue_list));
+ BUG_ON(cic->key != cfqd_dead_key(cfqd));
spin_lock_irqsave(&ioc->lock, flags);
BUG_ON(ioc->ioc_data == cic);
- radix_tree_delete(&ioc->radix_root, (unsigned long) cfqd);
+ radix_tree_delete(&ioc->radix_root, cfqd->cic_index);
hlist_del_rcu(&cic->cic_list);
spin_unlock_irqrestore(&ioc->lock, flags);
@@ -2900,7 +2937,6 @@
{
struct cfq_io_context *cic;
unsigned long flags;
- void *k;
if (unlikely(!ioc))
return NULL;
@@ -2917,13 +2953,11 @@
}
do {
- cic = radix_tree_lookup(&ioc->radix_root, (unsigned long) cfqd);
+ cic = radix_tree_lookup(&ioc->radix_root, cfqd->cic_index);
rcu_read_unlock();
if (!cic)
break;
- /* ->key must be copied to avoid race with cfq_exit_queue() */
- k = cic->key;
- if (unlikely(!k)) {
+ if (unlikely(cic->key != cfqd)) {
cfq_drop_dead_cic(cfqd, ioc, cic);
rcu_read_lock();
continue;
@@ -2956,7 +2990,7 @@
spin_lock_irqsave(&ioc->lock, flags);
ret = radix_tree_insert(&ioc->radix_root,
- (unsigned long) cfqd, cic);
+ cfqd->cic_index, cic);
if (!ret)
hlist_add_head_rcu(&cic->cic_list, &ioc->cic_list);
spin_unlock_irqrestore(&ioc->lock, flags);
@@ -3223,7 +3257,7 @@
cfq_clear_cfqq_wait_request(cfqq);
__blk_run_queue(cfqd->queue);
} else {
- blkiocg_update_idle_time_stats(
+ cfq_blkiocg_update_idle_time_stats(
&cfqq->cfqg->blkg);
cfq_mark_cfqq_must_dispatch(cfqq);
}
@@ -3251,7 +3285,7 @@
rq_set_fifo_time(rq, jiffies + cfqd->cfq_fifo_expire[rq_is_sync(rq)]);
list_add_tail(&rq->queuelist, &cfqq->fifo);
cfq_add_rq_rb(rq);
- blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
+ cfq_blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
&cfqd->serving_group->blkg, rq_data_dir(rq),
rq_is_sync(rq));
cfq_rq_enqueued(cfqd, cfqq, rq);
@@ -3339,9 +3373,9 @@
WARN_ON(!cfqq->dispatched);
cfqd->rq_in_driver--;
cfqq->dispatched--;
- blkiocg_update_completion_stats(&cfqq->cfqg->blkg, rq_start_time_ns(rq),
- rq_io_start_time_ns(rq), rq_data_dir(rq),
- rq_is_sync(rq));
+ cfq_blkiocg_update_completion_stats(&cfqq->cfqg->blkg,
+ rq_start_time_ns(rq), rq_io_start_time_ns(rq),
+ rq_data_dir(rq), rq_is_sync(rq));
cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]--;
@@ -3516,6 +3550,9 @@
}
cic_set_cfqq(cic, NULL, 1);
+
+ cfq_put_cooperator(cfqq);
+
cfq_put_queue(cfqq);
return NULL;
}
@@ -3702,16 +3739,38 @@
cfq_put_async_queues(cfqd);
cfq_release_cfq_groups(cfqd);
- blkiocg_del_blkio_group(&cfqd->root_group.blkg);
+ cfq_blkiocg_del_blkio_group(&cfqd->root_group.blkg);
spin_unlock_irq(q->queue_lock);
cfq_shutdown_timer_wq(cfqd);
+ spin_lock(&cic_index_lock);
+ ida_remove(&cic_index_ida, cfqd->cic_index);
+ spin_unlock(&cic_index_lock);
+
/* Wait for cfqg->blkg->key accessors to exit their grace periods. */
call_rcu(&cfqd->rcu, cfq_cfqd_free);
}
+static int cfq_alloc_cic_index(void)
+{
+ int index, error;
+
+ do {
+ if (!ida_pre_get(&cic_index_ida, GFP_KERNEL))
+ return -ENOMEM;
+
+ spin_lock(&cic_index_lock);
+ error = ida_get_new(&cic_index_ida, &index);
+ spin_unlock(&cic_index_lock);
+ if (error && error != -EAGAIN)
+ return error;
+ } while (error);
+
+ return index;
+}
+
static void *cfq_init_queue(struct request_queue *q)
{
struct cfq_data *cfqd;
@@ -3719,10 +3778,16 @@
struct cfq_group *cfqg;
struct cfq_rb_root *st;
+ i = cfq_alloc_cic_index();
+ if (i < 0)
+ return NULL;
+
cfqd = kmalloc_node(sizeof(*cfqd), GFP_KERNEL | __GFP_ZERO, q->node);
if (!cfqd)
return NULL;
+ cfqd->cic_index = i;
+
/* Init root service tree */
cfqd->grp_service_tree = CFQ_RB_ROOT;
@@ -3742,8 +3807,8 @@
*/
atomic_set(&cfqg->ref, 1);
rcu_read_lock();
- blkiocg_add_blkio_group(&blkio_root_cgroup, &cfqg->blkg, (void *)cfqd,
- 0);
+ cfq_blkiocg_add_blkio_group(&blkio_root_cgroup, &cfqg->blkg,
+ (void *)cfqd, 0);
rcu_read_unlock();
#endif
/*
@@ -3984,6 +4049,7 @@
*/
if (elv_ioc_count_read(cfq_ioc_count))
wait_for_completion(&all_gone);
+ ida_destroy(&cic_index_ida);
cfq_slab_kill();
}
diff --git a/block/cfq.h b/block/cfq.h
new file mode 100644
index 0000000..93448e5
--- /dev/null
+++ b/block/cfq.h
@@ -0,0 +1,115 @@
+#ifndef _CFQ_H
+#define _CFQ_H
+#include "blk-cgroup.h"
+
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
+static inline void cfq_blkiocg_update_io_add_stats(struct blkio_group *blkg,
+ struct blkio_group *curr_blkg, bool direction, bool sync)
+{
+ blkiocg_update_io_add_stats(blkg, curr_blkg, direction, sync);
+}
+
+static inline void cfq_blkiocg_update_dequeue_stats(struct blkio_group *blkg,
+ unsigned long dequeue)
+{
+ blkiocg_update_dequeue_stats(blkg, dequeue);
+}
+
+static inline void cfq_blkiocg_update_timeslice_used(struct blkio_group *blkg,
+ unsigned long time)
+{
+ blkiocg_update_timeslice_used(blkg, time);
+}
+
+static inline void cfq_blkiocg_set_start_empty_time(struct blkio_group *blkg)
+{
+ blkiocg_set_start_empty_time(blkg);
+}
+
+static inline void cfq_blkiocg_update_io_remove_stats(struct blkio_group *blkg,
+ bool direction, bool sync)
+{
+ blkiocg_update_io_remove_stats(blkg, direction, sync);
+}
+
+static inline void cfq_blkiocg_update_io_merged_stats(struct blkio_group *blkg,
+ bool direction, bool sync)
+{
+ blkiocg_update_io_merged_stats(blkg, direction, sync);
+}
+
+static inline void cfq_blkiocg_update_idle_time_stats(struct blkio_group *blkg)
+{
+ blkiocg_update_idle_time_stats(blkg);
+}
+
+static inline void
+cfq_blkiocg_update_avg_queue_size_stats(struct blkio_group *blkg)
+{
+ blkiocg_update_avg_queue_size_stats(blkg);
+}
+
+static inline void
+cfq_blkiocg_update_set_idle_time_stats(struct blkio_group *blkg)
+{
+ blkiocg_update_set_idle_time_stats(blkg);
+}
+
+static inline void cfq_blkiocg_update_dispatch_stats(struct blkio_group *blkg,
+ uint64_t bytes, bool direction, bool sync)
+{
+ blkiocg_update_dispatch_stats(blkg, bytes, direction, sync);
+}
+
+static inline void cfq_blkiocg_update_completion_stats(struct blkio_group *blkg, uint64_t start_time, uint64_t io_start_time, bool direction, bool sync)
+{
+ blkiocg_update_completion_stats(blkg, start_time, io_start_time,
+ direction, sync);
+}
+
+static inline void cfq_blkiocg_add_blkio_group(struct blkio_cgroup *blkcg,
+ struct blkio_group *blkg, void *key, dev_t dev) {
+ blkiocg_add_blkio_group(blkcg, blkg, key, dev);
+}
+
+static inline int cfq_blkiocg_del_blkio_group(struct blkio_group *blkg)
+{
+ return blkiocg_del_blkio_group(blkg);
+}
+
+#else /* CFQ_GROUP_IOSCHED */
+static inline void cfq_blkiocg_update_io_add_stats(struct blkio_group *blkg,
+ struct blkio_group *curr_blkg, bool direction, bool sync) {}
+
+static inline void cfq_blkiocg_update_dequeue_stats(struct blkio_group *blkg,
+ unsigned long dequeue) {}
+
+static inline void cfq_blkiocg_update_timeslice_used(struct blkio_group *blkg,
+ unsigned long time) {}
+static inline void cfq_blkiocg_set_start_empty_time(struct blkio_group *blkg) {}
+static inline void cfq_blkiocg_update_io_remove_stats(struct blkio_group *blkg,
+ bool direction, bool sync) {}
+static inline void cfq_blkiocg_update_io_merged_stats(struct blkio_group *blkg,
+ bool direction, bool sync) {}
+static inline void cfq_blkiocg_update_idle_time_stats(struct blkio_group *blkg)
+{
+}
+static inline void
+cfq_blkiocg_update_avg_queue_size_stats(struct blkio_group *blkg) {}
+
+static inline void
+cfq_blkiocg_update_set_idle_time_stats(struct blkio_group *blkg) {}
+
+static inline void cfq_blkiocg_update_dispatch_stats(struct blkio_group *blkg,
+ uint64_t bytes, bool direction, bool sync) {}
+static inline void cfq_blkiocg_update_completion_stats(struct blkio_group *blkg, uint64_t start_time, uint64_t io_start_time, bool direction, bool sync) {}
+
+static inline void cfq_blkiocg_add_blkio_group(struct blkio_cgroup *blkcg,
+ struct blkio_group *blkg, void *key, dev_t dev) {}
+static inline int cfq_blkiocg_del_blkio_group(struct blkio_group *blkg)
+{
+ return 0;
+}
+
+#endif /* CFQ_GROUP_IOSCHED */
+#endif
diff --git a/block/elevator.c b/block/elevator.c
index 6df2b50..923a913 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -242,9 +242,11 @@
{
struct elevator_type *e = NULL;
struct elevator_queue *eq;
- int ret = 0;
void *data;
+ if (unlikely(q->elevator))
+ return 0;
+
INIT_LIST_HEAD(&q->queue_head);
q->last_merge = NULL;
q->end_sector = 0;
@@ -284,7 +286,7 @@
}
elevator_attach(q, eq, data);
- return ret;
+ return 0;
}
EXPORT_SYMBOL(elevator_init);
@@ -1097,7 +1099,7 @@
struct elevator_type *__e;
int len = 0;
- if (!q->elevator)
+ if (!q->elevator || !blk_queue_stackable(q))
return sprintf(name, "none\n");
elv = e->elevator_type;
diff --git a/drivers/Makefile b/drivers/Makefile
index f42a030..91874e0 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -10,6 +10,7 @@
obj-$(CONFIG_PARISC) += parisc/
obj-$(CONFIG_RAPIDIO) += rapidio/
obj-y += video/
+obj-y += idle/
obj-$(CONFIG_ACPI) += acpi/
obj-$(CONFIG_SFI) += sfi/
# PnP must come after ACPI since it will eventually need to check if acpi
@@ -91,7 +92,6 @@
obj-y += lguest/
obj-$(CONFIG_CPU_FREQ) += cpufreq/
obj-$(CONFIG_CPU_IDLE) += cpuidle/
-obj-y += idle/
obj-$(CONFIG_MMC) += mmc/
obj-$(CONFIG_MEMSTICK) += memstick/
obj-$(CONFIG_NEW_LEDS) += leds/
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 93d2c79..7464115 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -360,4 +360,13 @@
To compile this driver as a module, choose M here:
the modules will be called sbs and sbshc.
+config ACPI_HED
+ tristate "Hardware Error Device"
+ help
+ This driver supports the Hardware Error Device (PNP0C33),
+ which is used to report some hardware errors notified via
+ SCI, mainly the corrected errors.
+
+source "drivers/acpi/apei/Kconfig"
+
endif # ACPI
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index a8d8998..6ee3316 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -19,7 +19,7 @@
# All the builtin files are in the "acpi." module_param namespace.
acpi-y += osl.o utils.o reboot.o
-acpi-y += hest.o
+acpi-y += atomicio.o
# sleep related files
acpi-y += wakeup.o
@@ -59,6 +59,7 @@
obj-$(CONFIG_ACPI_SBS) += sbshc.o
obj-$(CONFIG_ACPI_SBS) += sbs.o
obj-$(CONFIG_ACPI_POWER_METER) += power_meter.o
+obj-$(CONFIG_ACPI_HED) += hed.o
# processor has its own "processor." module_param namespace
processor-y := processor_driver.o processor_throttling.o
@@ -66,3 +67,5 @@
processor-$(CONFIG_CPU_FREQ) += processor_perflib.o
obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o
+
+obj-$(CONFIG_ACPI_APEI) += apei/
diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c
index 6212213..446aced 100644
--- a/drivers/acpi/acpi_pad.c
+++ b/drivers/acpi/acpi_pad.c
@@ -43,6 +43,12 @@
#define CPUID5_ECX_EXTENSIONS_SUPPORTED (0x1)
#define CPUID5_ECX_INTERRUPT_BREAK (0x2)
static unsigned long power_saving_mwait_eax;
+
+static unsigned char tsc_detected_unstable;
+static unsigned char tsc_marked_unstable;
+static unsigned char lapic_detected_unstable;
+static unsigned char lapic_marked_unstable;
+
static void power_saving_mwait_init(void)
{
unsigned int eax, ebx, ecx, edx;
@@ -71,9 +77,6 @@
power_saving_mwait_eax = (highest_cstate << MWAIT_SUBSTATE_SIZE) |
(highest_subcstate - 1);
- for_each_online_cpu(i)
- clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &i);
-
#if defined(CONFIG_GENERIC_TIME) && defined(CONFIG_X86)
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
@@ -82,13 +85,15 @@
* AMD Fam10h TSC will tick in all
* C/P/S0/S1 states when this bit is set.
*/
- if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
- return;
-
- /*FALL THROUGH*/
+ if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
+ tsc_detected_unstable = 1;
+ if (!boot_cpu_has(X86_FEATURE_ARAT))
+ lapic_detected_unstable = 1;
+ break;
default:
- /* TSC could halt in idle, so notify users */
- mark_tsc_unstable("TSC halts in idle");
+ /* TSC & LAPIC could halt in idle */
+ tsc_detected_unstable = 1;
+ lapic_detected_unstable = 1;
}
#endif
}
@@ -168,20 +173,28 @@
do_sleep = 0;
- current_thread_info()->status &= ~TS_POLLING;
- /*
- * TS_POLLING-cleared state must be visible before we test
- * NEED_RESCHED:
- */
- smp_mb();
-
expire_time = jiffies + HZ * (100 - idle_pct) / 100;
while (!need_resched()) {
+ if (tsc_detected_unstable && !tsc_marked_unstable) {
+ /* TSC could halt in idle, so notify users */
+ mark_tsc_unstable("TSC halts in idle");
+ tsc_marked_unstable = 1;
+ }
+ if (lapic_detected_unstable && !lapic_marked_unstable) {
+ int i;
+ /* LAPIC could halt in idle, so notify users */
+ for_each_online_cpu(i)
+ clockevents_notify(
+ CLOCK_EVT_NOTIFY_BROADCAST_ON,
+ &i);
+ lapic_marked_unstable = 1;
+ }
local_irq_disable();
cpu = smp_processor_id();
- clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER,
- &cpu);
+ if (lapic_marked_unstable)
+ clockevents_notify(
+ CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
stop_critical_timings();
__monitor((void *)¤t_thread_info()->flags, 0, 0);
@@ -190,8 +203,9 @@
__mwait(power_saving_mwait_eax, 1);
start_critical_timings();
- clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT,
- &cpu);
+ if (lapic_marked_unstable)
+ clockevents_notify(
+ CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
local_irq_enable();
if (jiffies > expire_time) {
@@ -200,8 +214,6 @@
}
}
- current_thread_info()->status |= TS_POLLING;
-
/*
* current sched_rt has threshold for rt task running time.
* When a rt task uses 95% CPU time, the rt thread will be
diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h
index 33181ad..b17d8de 100644
--- a/drivers/acpi/acpica/acconfig.h
+++ b/drivers/acpi/acpica/acconfig.h
@@ -119,6 +119,10 @@
#define ACPI_MAX_LOOP_ITERATIONS 0xFFFF
+/* Maximum sleep allowed via Sleep() operator */
+
+#define ACPI_MAX_SLEEP 20000 /* Two seconds */
+
/******************************************************************************
*
* ACPI Specification constants (Do not change unless the specification changes)
diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h
index 64d1e5c..c3f43da 100644
--- a/drivers/acpi/acpica/acevents.h
+++ b/drivers/acpi/acpica/acevents.h
@@ -80,10 +80,6 @@
acpi_status
acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info);
-acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info);
-
-acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info);
-
struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
u32 gpe_number);
diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h
index 9070f1f..899d68a 100644
--- a/drivers/acpi/acpica/acglobal.h
+++ b/drivers/acpi/acpica/acglobal.h
@@ -125,6 +125,14 @@
*/
u8 ACPI_INIT_GLOBAL(acpi_gbl_copy_dsdt_locally, FALSE);
+/*
+ * Optionally truncate I/O addresses to 16 bits. Provides compatibility
+ * with other ACPI implementations. NOTE: During ACPICA initialization,
+ * this value is set to TRUE if any Windows OSI strings have been
+ * requested by the BIOS.
+ */
+u8 ACPI_INIT_GLOBAL(acpi_gbl_truncate_io_addresses, FALSE);
+
/* acpi_gbl_FADT is a local copy of the FADT, converted to a common format. */
struct acpi_table_fadt acpi_gbl_FADT;
diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h
index 5900f13..3239158 100644
--- a/drivers/acpi/acpica/achware.h
+++ b/drivers/acpi/acpica/achware.h
@@ -90,7 +90,11 @@
/*
* hwgpe - GPE support
*/
-acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info);
+u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info,
+ struct acpi_gpe_register_info *gpe_register_info);
+
+acpi_status
+acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action);
acpi_status
acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info *gpe_event_info);
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index a221ad4..7c2c336 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -69,7 +69,7 @@
acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info)
{
struct acpi_gpe_register_info *gpe_register_info;
- u8 register_bit;
+ u32 register_bit;
ACPI_FUNCTION_TRACE(ev_update_gpe_enable_masks);
@@ -78,9 +78,8 @@
return_ACPI_STATUS(AE_NOT_EXIST);
}
- register_bit = (u8)
- (1 <<
- (gpe_event_info->gpe_number - gpe_register_info->base_gpe_number));
+ register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+ gpe_register_info);
/* Clear the wake/run bits up front */
@@ -100,106 +99,6 @@
return_ACPI_STATUS(AE_OK);
}
-/*******************************************************************************
- *
- * FUNCTION: acpi_ev_enable_gpe
- *
- * PARAMETERS: gpe_event_info - GPE to enable
- *
- * RETURN: Status
- *
- * DESCRIPTION: Hardware-enable a GPE. Always enables the GPE, regardless
- * of type or number of references.
- *
- * Note: The GPE lock should be already acquired when this function is called.
- *
- ******************************************************************************/
-
-acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
-{
- acpi_status status;
-
-
- ACPI_FUNCTION_TRACE(ev_enable_gpe);
-
-
- /*
- * We will only allow a GPE to be enabled if it has either an
- * associated method (_Lxx/_Exx) or a handler. Otherwise, the
- * GPE will be immediately disabled by acpi_ev_gpe_dispatch the
- * first time it fires.
- */
- if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) {
- return_ACPI_STATUS(AE_NO_HANDLER);
- }
-
- /* Ensure the HW enable masks are current */
-
- status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Clear the GPE (of stale events) */
-
- status = acpi_hw_clear_gpe(gpe_event_info);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Enable the requested GPE */
-
- status = acpi_hw_write_gpe_enable_reg(gpe_event_info);
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ev_disable_gpe
- *
- * PARAMETERS: gpe_event_info - GPE to disable
- *
- * RETURN: Status
- *
- * DESCRIPTION: Hardware-disable a GPE. Always disables the requested GPE,
- * regardless of the type or number of references.
- *
- * Note: The GPE lock should be already acquired when this function is called.
- *
- ******************************************************************************/
-
-acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
-{
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(ev_disable_gpe);
-
-
- /*
- * Note: Always disable the GPE, even if we think that that it is already
- * disabled. It is possible that the AML or some other code has enabled
- * the GPE behind our back.
- */
-
- /* Ensure the HW enable masks are current */
-
- status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /*
- * Always H/W disable this GPE, even if we don't know the GPE type.
- * Simply clear the enable bit for this particular GPE, but do not
- * write out the current GPE enable mask since this may inadvertently
- * enable GPEs too early. An example is a rogue GPE that has arrived
- * during ACPICA initialization - possibly because AML or other code
- * has enabled the GPE.
- */
- status = acpi_hw_low_disable_gpe(gpe_event_info);
- return_ACPI_STATUS(status);
-}
-
/*******************************************************************************
*
@@ -451,10 +350,6 @@
return_VOID;
}
- /* Update the GPE register masks for return to enabled state */
-
- (void)acpi_ev_update_gpe_enable_masks(gpe_event_info);
-
/*
* Take a snapshot of the GPE info for this level - we copy the info to
* prevent a race condition with remove_handler/remove_block.
@@ -607,7 +502,7 @@
* Disable the GPE, so it doesn't keep firing before the method has a
* chance to run (it runs asynchronously with interrupts enabled).
*/
- status = acpi_ev_disable_gpe(gpe_event_info);
+ status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Unable to disable GPE[0x%2X]",
@@ -644,7 +539,7 @@
* Disable the GPE. The GPE will remain disabled a handler
* is installed or ACPICA is restarted.
*/
- status = acpi_ev_disable_gpe(gpe_event_info);
+ status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Unable to disable GPE[0x%2X]",
diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c
index 7c28f2d..341a38c 100644
--- a/drivers/acpi/acpica/evgpeblk.c
+++ b/drivers/acpi/acpica/evgpeblk.c
@@ -500,6 +500,19 @@
gpe_index = (i * ACPI_GPE_REGISTER_WIDTH) + j;
gpe_event_info = &gpe_block->event_info[gpe_index];
+ gpe_number = gpe_index + gpe_block->block_base_number;
+
+ /*
+ * If the GPE has already been enabled for runtime
+ * signaling, make sure it remains enabled, but do not
+ * increment its reference counter.
+ */
+ if (gpe_event_info->runtime_count) {
+ acpi_set_gpe(gpe_device, gpe_number,
+ ACPI_GPE_ENABLE);
+ gpe_enabled_count++;
+ continue;
+ }
if (gpe_event_info->flags & ACPI_GPE_CAN_WAKE) {
wake_gpe_count++;
@@ -516,7 +529,6 @@
/* Enable this GPE */
- gpe_number = gpe_index + gpe_block->block_base_number;
status = acpi_enable_gpe(gpe_device, gpe_number,
ACPI_GPE_TYPE_RUNTIME);
if (ACPI_FAILURE(status)) {
diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c
index cc82502..4a531cd 100644
--- a/drivers/acpi/acpica/evxface.c
+++ b/drivers/acpi/acpica/evxface.c
@@ -719,13 +719,6 @@
handler->context = context;
handler->method_node = gpe_event_info->dispatch.method_node;
- /* Disable the GPE before installing the handler */
-
- status = acpi_ev_disable_gpe(gpe_event_info);
- if (ACPI_FAILURE (status)) {
- goto unlock_and_exit;
- }
-
/* Install the handler */
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c
index 7c7bbb4..d97b8dc 100644
--- a/drivers/acpi/acpica/evxfevnt.c
+++ b/drivers/acpi/acpica/evxfevnt.c
@@ -69,7 +69,7 @@
acpi_status acpi_enable(void)
{
- acpi_status status = AE_OK;
+ acpi_status status;
ACPI_FUNCTION_TRACE(acpi_enable);
@@ -84,21 +84,30 @@
if (acpi_hw_get_mode() == ACPI_SYS_MODE_ACPI) {
ACPI_DEBUG_PRINT((ACPI_DB_INIT,
"System is already in ACPI mode\n"));
- } else {
- /* Transition to ACPI mode */
-
- status = acpi_hw_set_mode(ACPI_SYS_MODE_ACPI);
- if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO,
- "Could not transition to ACPI mode"));
- return_ACPI_STATUS(status);
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_INIT,
- "Transition to ACPI mode successful\n"));
+ return_ACPI_STATUS(AE_OK);
}
- return_ACPI_STATUS(status);
+ /* Transition to ACPI mode */
+
+ status = acpi_hw_set_mode(ACPI_SYS_MODE_ACPI);
+ if (ACPI_FAILURE(status)) {
+ ACPI_ERROR((AE_INFO,
+ "Could not transition to ACPI mode"));
+ return_ACPI_STATUS(status);
+ }
+
+ /* Sanity check that transition succeeded */
+
+ if (acpi_hw_get_mode() != ACPI_SYS_MODE_ACPI) {
+ ACPI_ERROR((AE_INFO,
+ "Hardware did not enter ACPI mode"));
+ return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INIT,
+ "Transition to ACPI mode successful\n"));
+
+ return_ACPI_STATUS(AE_OK);
}
ACPI_EXPORT_SYMBOL(acpi_enable)
@@ -201,6 +210,44 @@
/*******************************************************************************
*
+ * FUNCTION: acpi_clear_and_enable_gpe
+ *
+ * PARAMETERS: gpe_event_info - GPE to enable
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Clear the given GPE from stale events and enable it.
+ *
+ ******************************************************************************/
+static acpi_status
+acpi_clear_and_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
+{
+ acpi_status status;
+
+ /*
+ * We will only allow a GPE to be enabled if it has either an
+ * associated method (_Lxx/_Exx) or a handler. Otherwise, the
+ * GPE will be immediately disabled by acpi_ev_gpe_dispatch the
+ * first time it fires.
+ */
+ if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) {
+ return_ACPI_STATUS(AE_NO_HANDLER);
+ }
+
+ /* Clear the GPE (of stale events) */
+ status = acpi_hw_clear_gpe(gpe_event_info);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Enable the requested GPE */
+ status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
+
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
* FUNCTION: acpi_set_gpe
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
@@ -240,11 +287,11 @@
switch (action) {
case ACPI_GPE_ENABLE:
- status = acpi_ev_enable_gpe(gpe_event_info);
+ status = acpi_clear_and_enable_gpe(gpe_event_info);
break;
case ACPI_GPE_DISABLE:
- status = acpi_ev_disable_gpe(gpe_event_info);
+ status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
break;
default:
@@ -307,7 +354,11 @@
gpe_event_info->runtime_count++;
if (gpe_event_info->runtime_count == 1) {
- status = acpi_ev_enable_gpe(gpe_event_info);
+ status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
+ if (ACPI_SUCCESS(status)) {
+ status = acpi_clear_and_enable_gpe(gpe_event_info);
+ }
+
if (ACPI_FAILURE(status)) {
gpe_event_info->runtime_count--;
goto unlock_and_exit;
@@ -334,7 +385,7 @@
*/
gpe_event_info->wakeup_count++;
if (gpe_event_info->wakeup_count == 1) {
- (void)acpi_ev_update_gpe_enable_masks(gpe_event_info);
+ status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
}
}
@@ -394,7 +445,12 @@
gpe_event_info->runtime_count--;
if (!gpe_event_info->runtime_count) {
- status = acpi_ev_disable_gpe(gpe_event_info);
+ status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
+ if (ACPI_SUCCESS(status)) {
+ status = acpi_hw_low_set_gpe(gpe_event_info,
+ ACPI_GPE_DISABLE);
+ }
+
if (ACPI_FAILURE(status)) {
gpe_event_info->runtime_count++;
goto unlock_and_exit;
@@ -415,7 +471,7 @@
gpe_event_info->wakeup_count--;
if (!gpe_event_info->wakeup_count) {
- (void)acpi_ev_update_gpe_enable_masks(gpe_event_info);
+ status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
}
}
diff --git a/drivers/acpi/acpica/exsystem.c b/drivers/acpi/acpica/exsystem.c
index 6d32e09..675aaa9 100644
--- a/drivers/acpi/acpica/exsystem.c
+++ b/drivers/acpi/acpica/exsystem.c
@@ -201,6 +201,14 @@
acpi_ex_relinquish_interpreter();
+ /*
+ * For compatibility with other ACPI implementations and to prevent
+ * accidental deep sleeps, limit the sleep time to something reasonable.
+ */
+ if (how_long > ACPI_MAX_SLEEP) {
+ how_long = ACPI_MAX_SLEEP;
+ }
+
acpi_os_sleep(how_long);
/* And now we must get the interpreter again */
diff --git a/drivers/acpi/acpica/hwacpi.c b/drivers/acpi/acpica/hwacpi.c
index 679a112..b44274a 100644
--- a/drivers/acpi/acpica/hwacpi.c
+++ b/drivers/acpi/acpica/hwacpi.c
@@ -63,7 +63,6 @@
{
acpi_status status;
- u32 retry;
ACPI_FUNCTION_TRACE(hw_set_mode);
@@ -125,24 +124,7 @@
return_ACPI_STATUS(status);
}
- /*
- * Some hardware takes a LONG time to switch modes. Give them 3 sec to
- * do so, but allow faster systems to proceed more quickly.
- */
- retry = 3000;
- while (retry) {
- if (acpi_hw_get_mode() == mode) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Mode %X successfully enabled\n",
- mode));
- return_ACPI_STATUS(AE_OK);
- }
- acpi_os_stall(1000);
- retry--;
- }
-
- ACPI_ERROR((AE_INFO, "Hardware did not change modes"));
- return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
+ return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c
index bd72319..3450309 100644
--- a/drivers/acpi/acpica/hwgpe.c
+++ b/drivers/acpi/acpica/hwgpe.c
@@ -57,21 +57,47 @@
/******************************************************************************
*
- * FUNCTION: acpi_hw_low_disable_gpe
+ * FUNCTION: acpi_hw_gpe_register_bit
*
- * PARAMETERS: gpe_event_info - Info block for the GPE to be disabled
+ * PARAMETERS: gpe_event_info - Info block for the GPE
+ * gpe_register_info - Info block for the GPE register
*
* RETURN: Status
*
- * DESCRIPTION: Disable a single GPE in the enable register.
+ * DESCRIPTION: Compute GPE enable mask with one bit corresponding to the given
+ * GPE set.
*
******************************************************************************/
-acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
+u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info,
+ struct acpi_gpe_register_info *gpe_register_info)
+{
+ return (u32)1 << (gpe_event_info->gpe_number -
+ gpe_register_info->base_gpe_number);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_hw_low_set_gpe
+ *
+ * PARAMETERS: gpe_event_info - Info block for the GPE to be disabled
+ * action - Enable or disable
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Enable or disable a single GPE in its enable register.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action)
{
struct acpi_gpe_register_info *gpe_register_info;
acpi_status status;
u32 enable_mask;
+ u32 register_bit;
+
+ ACPI_FUNCTION_ENTRY();
/* Get the info block for the entire GPE register */
@@ -87,11 +113,27 @@
return (status);
}
- /* Clear just the bit that corresponds to this GPE */
+ /* Set ot clear just the bit that corresponds to this GPE */
- ACPI_CLEAR_BIT(enable_mask, ((u32)1 <<
- (gpe_event_info->gpe_number -
- gpe_register_info->base_gpe_number)));
+ register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+ gpe_register_info);
+ switch (action) {
+ case ACPI_GPE_COND_ENABLE:
+ if (!(register_bit & gpe_register_info->enable_for_run))
+ return (AE_BAD_PARAMETER);
+
+ case ACPI_GPE_ENABLE:
+ ACPI_SET_BIT(enable_mask, register_bit);
+ break;
+
+ case ACPI_GPE_DISABLE:
+ ACPI_CLEAR_BIT(enable_mask, register_bit);
+ break;
+
+ default:
+ ACPI_ERROR((AE_INFO, "Invalid action\n"));
+ return (AE_BAD_PARAMETER);
+ }
/* Write the updated enable mask */
@@ -116,23 +158,11 @@
acpi_status
acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info * gpe_event_info)
{
- struct acpi_gpe_register_info *gpe_register_info;
acpi_status status;
ACPI_FUNCTION_ENTRY();
- /* Get the info block for the entire GPE register */
-
- gpe_register_info = gpe_event_info->register_info;
- if (!gpe_register_info) {
- return (AE_NOT_EXIST);
- }
-
- /* Write the entire GPE (runtime) enable register */
-
- status = acpi_hw_write(gpe_register_info->enable_for_run,
- &gpe_register_info->enable_address);
-
+ status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_COND_ENABLE);
return (status);
}
@@ -150,21 +180,28 @@
acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info)
{
+ struct acpi_gpe_register_info *gpe_register_info;
acpi_status status;
- u8 register_bit;
+ u32 register_bit;
ACPI_FUNCTION_ENTRY();
- register_bit = (u8)(1 <<
- (gpe_event_info->gpe_number -
- gpe_event_info->register_info->base_gpe_number));
+ /* Get the info block for the entire GPE register */
+
+ gpe_register_info = gpe_event_info->register_info;
+ if (!gpe_register_info) {
+ return (AE_NOT_EXIST);
+ }
+
+ register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+ gpe_register_info);
/*
* Write a one to the appropriate bit in the status register to
* clear this GPE.
*/
status = acpi_hw_write(register_bit,
- &gpe_event_info->register_info->status_address);
+ &gpe_register_info->status_address);
return (status);
}
@@ -187,7 +224,7 @@
acpi_event_status * event_status)
{
u32 in_byte;
- u8 register_bit;
+ u32 register_bit;
struct acpi_gpe_register_info *gpe_register_info;
acpi_status status;
acpi_event_status local_event_status = 0;
@@ -204,9 +241,8 @@
/* Get the register bitmask for this GPE */
- register_bit = (u8)(1 <<
- (gpe_event_info->gpe_number -
- gpe_event_info->register_info->base_gpe_number));
+ register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+ gpe_register_info);
/* GPE currently enabled? (enabled for runtime?) */
diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c
index c10d587..e1d9c77 100644
--- a/drivers/acpi/acpica/hwvalid.c
+++ b/drivers/acpi/acpica/hwvalid.c
@@ -222,6 +222,12 @@
u32 one_byte;
u32 i;
+ /* Truncate address to 16 bits if requested */
+
+ if (acpi_gbl_truncate_io_addresses) {
+ address &= ACPI_UINT16_MAX;
+ }
+
/* Validate the entire request and perform the I/O */
status = acpi_hw_validate_io_request(address, width);
@@ -279,6 +285,12 @@
acpi_status status;
u32 i;
+ /* Truncate address to 16 bits if requested */
+
+ if (acpi_gbl_truncate_io_addresses) {
+ address &= ACPI_UINT16_MAX;
+ }
+
/* Validate the entire request and perform the I/O */
status = acpi_hw_validate_io_request(address, width);
diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c
index 9bd6f05..4e5272c 100644
--- a/drivers/acpi/acpica/nsinit.c
+++ b/drivers/acpi/acpica/nsinit.c
@@ -193,6 +193,15 @@
acpi_ns_init_one_device, NULL, &info,
NULL);
+ /*
+ * Any _OSI requests should be completed by now. If the BIOS has
+ * requested any Windows OSI strings, we will always truncate
+ * I/O addresses to 16 bits -- for Windows compatibility.
+ */
+ if (acpi_gbl_osi_data >= ACPI_OSI_WIN_2000) {
+ acpi_gbl_truncate_io_addresses = TRUE;
+ }
+
ACPI_FREE(info.evaluate_info);
if (ACPI_FAILURE(status)) {
goto error_exit;
diff --git a/drivers/acpi/apei/Kconfig b/drivers/acpi/apei/Kconfig
new file mode 100644
index 0000000..f8c668f
--- /dev/null
+++ b/drivers/acpi/apei/Kconfig
@@ -0,0 +1,30 @@
+config ACPI_APEI
+ bool "ACPI Platform Error Interface (APEI)"
+ depends on X86
+ help
+ APEI allows to report errors (for example from the chipset)
+ to the operating system. This improves NMI handling
+ especially. In addition it supports error serialization and
+ error injection.
+
+config ACPI_APEI_GHES
+ tristate "APEI Generic Hardware Error Source"
+ depends on ACPI_APEI && X86
+ select ACPI_HED
+ help
+ Generic Hardware Error Source provides a way to report
+ platform hardware errors (such as that from chipset). It
+ works in so called "Firmware First" mode, that is, hardware
+ errors are reported to firmware firstly, then reported to
+ Linux by firmware. This way, some non-standard hardware
+ error registers or non-standard hardware link can be checked
+ by firmware to produce more valuable hardware error
+ information for Linux.
+
+config ACPI_APEI_EINJ
+ tristate "APEI Error INJection (EINJ)"
+ depends on ACPI_APEI && DEBUG_FS
+ help
+ EINJ provides a hardware error injection mechanism, it is
+ mainly used for debugging and testing the other parts of
+ APEI and some other RAS features.
diff --git a/drivers/acpi/apei/Makefile b/drivers/acpi/apei/Makefile
new file mode 100644
index 0000000..b13b03a
--- /dev/null
+++ b/drivers/acpi/apei/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_ACPI_APEI) += apei.o
+obj-$(CONFIG_ACPI_APEI_GHES) += ghes.o
+obj-$(CONFIG_ACPI_APEI_EINJ) += einj.o
+
+apei-y := apei-base.o hest.o cper.o erst.o
diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c
new file mode 100644
index 0000000..216e1e9
--- /dev/null
+++ b/drivers/acpi/apei/apei-base.c
@@ -0,0 +1,594 @@
+/*
+ * apei-base.c - ACPI Platform Error Interface (APEI) supporting
+ * infrastructure
+ *
+ * APEI allows to report errors (for example from the chipset) to the
+ * the operating system. This improves NMI handling especially. In
+ * addition it supports error serialization and error injection.
+ *
+ * For more information about APEI, please refer to ACPI Specification
+ * version 4.0, chapter 17.
+ *
+ * This file has Common functions used by more than one APEI table,
+ * including framework of interpreter for ERST and EINJ; resource
+ * management for APEI registers.
+ *
+ * Copyright (C) 2009, Intel Corp.
+ * Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/kref.h>
+#include <linux/rculist.h>
+#include <linux/interrupt.h>
+#include <linux/debugfs.h>
+#include <acpi/atomicio.h>
+
+#include "apei-internal.h"
+
+#define APEI_PFX "APEI: "
+
+/*
+ * APEI ERST (Error Record Serialization Table) and EINJ (Error
+ * INJection) interpreter framework.
+ */
+
+#define APEI_EXEC_PRESERVE_REGISTER 0x1
+
+void apei_exec_ctx_init(struct apei_exec_context *ctx,
+ struct apei_exec_ins_type *ins_table,
+ u32 instructions,
+ struct acpi_whea_header *action_table,
+ u32 entries)
+{
+ ctx->ins_table = ins_table;
+ ctx->instructions = instructions;
+ ctx->action_table = action_table;
+ ctx->entries = entries;
+}
+EXPORT_SYMBOL_GPL(apei_exec_ctx_init);
+
+int __apei_exec_read_register(struct acpi_whea_header *entry, u64 *val)
+{
+ int rc;
+
+ rc = acpi_atomic_read(val, &entry->register_region);
+ if (rc)
+ return rc;
+ *val >>= entry->register_region.bit_offset;
+ *val &= entry->mask;
+
+ return 0;
+}
+
+int apei_exec_read_register(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry)
+{
+ int rc;
+ u64 val = 0;
+
+ rc = __apei_exec_read_register(entry, &val);
+ if (rc)
+ return rc;
+ ctx->value = val;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(apei_exec_read_register);
+
+int apei_exec_read_register_value(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry)
+{
+ int rc;
+
+ rc = apei_exec_read_register(ctx, entry);
+ if (rc)
+ return rc;
+ ctx->value = (ctx->value == entry->value);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(apei_exec_read_register_value);
+
+int __apei_exec_write_register(struct acpi_whea_header *entry, u64 val)
+{
+ int rc;
+
+ val &= entry->mask;
+ val <<= entry->register_region.bit_offset;
+ if (entry->flags & APEI_EXEC_PRESERVE_REGISTER) {
+ u64 valr = 0;
+ rc = acpi_atomic_read(&valr, &entry->register_region);
+ if (rc)
+ return rc;
+ valr &= ~(entry->mask << entry->register_region.bit_offset);
+ val |= valr;
+ }
+ rc = acpi_atomic_write(val, &entry->register_region);
+
+ return rc;
+}
+
+int apei_exec_write_register(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry)
+{
+ return __apei_exec_write_register(entry, ctx->value);
+}
+EXPORT_SYMBOL_GPL(apei_exec_write_register);
+
+int apei_exec_write_register_value(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry)
+{
+ int rc;
+
+ ctx->value = entry->value;
+ rc = apei_exec_write_register(ctx, entry);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(apei_exec_write_register_value);
+
+int apei_exec_noop(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry)
+{
+ return 0;
+}
+EXPORT_SYMBOL_GPL(apei_exec_noop);
+
+/*
+ * Interpret the specified action. Go through whole action table,
+ * execute all instructions belong to the action.
+ */
+int apei_exec_run(struct apei_exec_context *ctx, u8 action)
+{
+ int rc;
+ u32 i, ip;
+ struct acpi_whea_header *entry;
+ apei_exec_ins_func_t run;
+
+ ctx->ip = 0;
+
+ /*
+ * "ip" is the instruction pointer of current instruction,
+ * "ctx->ip" specifies the next instruction to executed,
+ * instruction "run" function may change the "ctx->ip" to
+ * implement "goto" semantics.
+ */
+rewind:
+ ip = 0;
+ for (i = 0; i < ctx->entries; i++) {
+ entry = &ctx->action_table[i];
+ if (entry->action != action)
+ continue;
+ if (ip == ctx->ip) {
+ if (entry->instruction >= ctx->instructions ||
+ !ctx->ins_table[entry->instruction].run) {
+ pr_warning(FW_WARN APEI_PFX
+ "Invalid action table, unknown instruction type: %d\n",
+ entry->instruction);
+ return -EINVAL;
+ }
+ run = ctx->ins_table[entry->instruction].run;
+ rc = run(ctx, entry);
+ if (rc < 0)
+ return rc;
+ else if (rc != APEI_EXEC_SET_IP)
+ ctx->ip++;
+ }
+ ip++;
+ if (ctx->ip < ip)
+ goto rewind;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(apei_exec_run);
+
+typedef int (*apei_exec_entry_func_t)(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry,
+ void *data);
+
+static int apei_exec_for_each_entry(struct apei_exec_context *ctx,
+ apei_exec_entry_func_t func,
+ void *data,
+ int *end)
+{
+ u8 ins;
+ int i, rc;
+ struct acpi_whea_header *entry;
+ struct apei_exec_ins_type *ins_table = ctx->ins_table;
+
+ for (i = 0; i < ctx->entries; i++) {
+ entry = ctx->action_table + i;
+ ins = entry->instruction;
+ if (end)
+ *end = i;
+ if (ins >= ctx->instructions || !ins_table[ins].run) {
+ pr_warning(FW_WARN APEI_PFX
+ "Invalid action table, unknown instruction type: %d\n",
+ ins);
+ return -EINVAL;
+ }
+ rc = func(ctx, entry, data);
+ if (rc)
+ return rc;
+ }
+
+ return 0;
+}
+
+static int pre_map_gar_callback(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry,
+ void *data)
+{
+ u8 ins = entry->instruction;
+
+ if (ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER)
+ return acpi_pre_map_gar(&entry->register_region);
+
+ return 0;
+}
+
+/*
+ * Pre-map all GARs in action table to make it possible to access them
+ * in NMI handler.
+ */
+int apei_exec_pre_map_gars(struct apei_exec_context *ctx)
+{
+ int rc, end;
+
+ rc = apei_exec_for_each_entry(ctx, pre_map_gar_callback,
+ NULL, &end);
+ if (rc) {
+ struct apei_exec_context ctx_unmap;
+ memcpy(&ctx_unmap, ctx, sizeof(*ctx));
+ ctx_unmap.entries = end;
+ apei_exec_post_unmap_gars(&ctx_unmap);
+ }
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(apei_exec_pre_map_gars);
+
+static int post_unmap_gar_callback(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry,
+ void *data)
+{
+ u8 ins = entry->instruction;
+
+ if (ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER)
+ acpi_post_unmap_gar(&entry->register_region);
+
+ return 0;
+}
+
+/* Post-unmap all GAR in action table. */
+int apei_exec_post_unmap_gars(struct apei_exec_context *ctx)
+{
+ return apei_exec_for_each_entry(ctx, post_unmap_gar_callback,
+ NULL, NULL);
+}
+EXPORT_SYMBOL_GPL(apei_exec_post_unmap_gars);
+
+/*
+ * Resource management for GARs in APEI
+ */
+struct apei_res {
+ struct list_head list;
+ unsigned long start;
+ unsigned long end;
+};
+
+/* Collect all resources requested, to avoid conflict */
+struct apei_resources apei_resources_all = {
+ .iomem = LIST_HEAD_INIT(apei_resources_all.iomem),
+ .ioport = LIST_HEAD_INIT(apei_resources_all.ioport),
+};
+
+static int apei_res_add(struct list_head *res_list,
+ unsigned long start, unsigned long size)
+{
+ struct apei_res *res, *resn, *res_ins = NULL;
+ unsigned long end = start + size;
+
+ if (end <= start)
+ return 0;
+repeat:
+ list_for_each_entry_safe(res, resn, res_list, list) {
+ if (res->start > end || res->end < start)
+ continue;
+ else if (end <= res->end && start >= res->start) {
+ kfree(res_ins);
+ return 0;
+ }
+ list_del(&res->list);
+ res->start = start = min(res->start, start);
+ res->end = end = max(res->end, end);
+ kfree(res_ins);
+ res_ins = res;
+ goto repeat;
+ }
+
+ if (res_ins)
+ list_add(&res_ins->list, res_list);
+ else {
+ res_ins = kmalloc(sizeof(*res), GFP_KERNEL);
+ if (!res_ins)
+ return -ENOMEM;
+ res_ins->start = start;
+ res_ins->end = end;
+ list_add(&res_ins->list, res_list);
+ }
+
+ return 0;
+}
+
+static int apei_res_sub(struct list_head *res_list1,
+ struct list_head *res_list2)
+{
+ struct apei_res *res1, *resn1, *res2, *res;
+ res1 = list_entry(res_list1->next, struct apei_res, list);
+ resn1 = list_entry(res1->list.next, struct apei_res, list);
+ while (&res1->list != res_list1) {
+ list_for_each_entry(res2, res_list2, list) {
+ if (res1->start >= res2->end ||
+ res1->end <= res2->start)
+ continue;
+ else if (res1->end <= res2->end &&
+ res1->start >= res2->start) {
+ list_del(&res1->list);
+ kfree(res1);
+ break;
+ } else if (res1->end > res2->end &&
+ res1->start < res2->start) {
+ res = kmalloc(sizeof(*res), GFP_KERNEL);
+ if (!res)
+ return -ENOMEM;
+ res->start = res2->end;
+ res->end = res1->end;
+ res1->end = res2->start;
+ list_add(&res->list, &res1->list);
+ resn1 = res;
+ } else {
+ if (res1->start < res2->start)
+ res1->end = res2->start;
+ else
+ res1->start = res2->end;
+ }
+ }
+ res1 = resn1;
+ resn1 = list_entry(resn1->list.next, struct apei_res, list);
+ }
+
+ return 0;
+}
+
+static void apei_res_clean(struct list_head *res_list)
+{
+ struct apei_res *res, *resn;
+
+ list_for_each_entry_safe(res, resn, res_list, list) {
+ list_del(&res->list);
+ kfree(res);
+ }
+}
+
+void apei_resources_fini(struct apei_resources *resources)
+{
+ apei_res_clean(&resources->iomem);
+ apei_res_clean(&resources->ioport);
+}
+EXPORT_SYMBOL_GPL(apei_resources_fini);
+
+static int apei_resources_merge(struct apei_resources *resources1,
+ struct apei_resources *resources2)
+{
+ int rc;
+ struct apei_res *res;
+
+ list_for_each_entry(res, &resources2->iomem, list) {
+ rc = apei_res_add(&resources1->iomem, res->start,
+ res->end - res->start);
+ if (rc)
+ return rc;
+ }
+ list_for_each_entry(res, &resources2->ioport, list) {
+ rc = apei_res_add(&resources1->ioport, res->start,
+ res->end - res->start);
+ if (rc)
+ return rc;
+ }
+
+ return 0;
+}
+
+/*
+ * EINJ has two groups of GARs (EINJ table entry and trigger table
+ * entry), so common resources are subtracted from the trigger table
+ * resources before the second requesting.
+ */
+int apei_resources_sub(struct apei_resources *resources1,
+ struct apei_resources *resources2)
+{
+ int rc;
+
+ rc = apei_res_sub(&resources1->iomem, &resources2->iomem);
+ if (rc)
+ return rc;
+ return apei_res_sub(&resources1->ioport, &resources2->ioport);
+}
+EXPORT_SYMBOL_GPL(apei_resources_sub);
+
+/*
+ * IO memory/port rersource management mechanism is used to check
+ * whether memory/port area used by GARs conflicts with normal memory
+ * or IO memory/port of devices.
+ */
+int apei_resources_request(struct apei_resources *resources,
+ const char *desc)
+{
+ struct apei_res *res, *res_bak;
+ struct resource *r;
+
+ apei_resources_sub(resources, &apei_resources_all);
+
+ list_for_each_entry(res, &resources->iomem, list) {
+ r = request_mem_region(res->start, res->end - res->start,
+ desc);
+ if (!r) {
+ pr_err(APEI_PFX
+ "Can not request iomem region <%016llx-%016llx> for GARs.\n",
+ (unsigned long long)res->start,
+ (unsigned long long)res->end);
+ res_bak = res;
+ goto err_unmap_iomem;
+ }
+ }
+
+ list_for_each_entry(res, &resources->ioport, list) {
+ r = request_region(res->start, res->end - res->start, desc);
+ if (!r) {
+ pr_err(APEI_PFX
+ "Can not request ioport region <%016llx-%016llx> for GARs.\n",
+ (unsigned long long)res->start,
+ (unsigned long long)res->end);
+ res_bak = res;
+ goto err_unmap_ioport;
+ }
+ }
+
+ apei_resources_merge(&apei_resources_all, resources);
+
+ return 0;
+err_unmap_ioport:
+ list_for_each_entry(res, &resources->ioport, list) {
+ if (res == res_bak)
+ break;
+ release_mem_region(res->start, res->end - res->start);
+ }
+ res_bak = NULL;
+err_unmap_iomem:
+ list_for_each_entry(res, &resources->iomem, list) {
+ if (res == res_bak)
+ break;
+ release_region(res->start, res->end - res->start);
+ }
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(apei_resources_request);
+
+void apei_resources_release(struct apei_resources *resources)
+{
+ struct apei_res *res;
+
+ list_for_each_entry(res, &resources->iomem, list)
+ release_mem_region(res->start, res->end - res->start);
+ list_for_each_entry(res, &resources->ioport, list)
+ release_region(res->start, res->end - res->start);
+
+ apei_resources_sub(&apei_resources_all, resources);
+}
+EXPORT_SYMBOL_GPL(apei_resources_release);
+
+static int apei_check_gar(struct acpi_generic_address *reg, u64 *paddr)
+{
+ u32 width, space_id;
+
+ width = reg->bit_width;
+ space_id = reg->space_id;
+ /* Handle possible alignment issues */
+ memcpy(paddr, ®->address, sizeof(*paddr));
+ if (!*paddr) {
+ pr_warning(FW_BUG APEI_PFX
+ "Invalid physical address in GAR [0x%llx/%u/%u]\n",
+ *paddr, width, space_id);
+ return -EINVAL;
+ }
+
+ if ((width != 8) && (width != 16) && (width != 32) && (width != 64)) {
+ pr_warning(FW_BUG APEI_PFX
+ "Invalid bit width in GAR [0x%llx/%u/%u]\n",
+ *paddr, width, space_id);
+ return -EINVAL;
+ }
+
+ if (space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY &&
+ space_id != ACPI_ADR_SPACE_SYSTEM_IO) {
+ pr_warning(FW_BUG APEI_PFX
+ "Invalid address space type in GAR [0x%llx/%u/%u]\n",
+ *paddr, width, space_id);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int collect_res_callback(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry,
+ void *data)
+{
+ struct apei_resources *resources = data;
+ struct acpi_generic_address *reg = &entry->register_region;
+ u8 ins = entry->instruction;
+ u64 paddr;
+ int rc;
+
+ if (!(ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER))
+ return 0;
+
+ rc = apei_check_gar(reg, &paddr);
+ if (rc)
+ return rc;
+
+ switch (reg->space_id) {
+ case ACPI_ADR_SPACE_SYSTEM_MEMORY:
+ return apei_res_add(&resources->iomem, paddr,
+ reg->bit_width / 8);
+ case ACPI_ADR_SPACE_SYSTEM_IO:
+ return apei_res_add(&resources->ioport, paddr,
+ reg->bit_width / 8);
+ default:
+ return -EINVAL;
+ }
+}
+
+/*
+ * Same register may be used by multiple instructions in GARs, so
+ * resources are collected before requesting.
+ */
+int apei_exec_collect_resources(struct apei_exec_context *ctx,
+ struct apei_resources *resources)
+{
+ return apei_exec_for_each_entry(ctx, collect_res_callback,
+ resources, NULL);
+}
+EXPORT_SYMBOL_GPL(apei_exec_collect_resources);
+
+struct dentry *apei_get_debugfs_dir(void)
+{
+ static struct dentry *dapei;
+
+ if (!dapei)
+ dapei = debugfs_create_dir("apei", NULL);
+
+ return dapei;
+}
+EXPORT_SYMBOL_GPL(apei_get_debugfs_dir);
diff --git a/drivers/acpi/apei/apei-internal.h b/drivers/acpi/apei/apei-internal.h
new file mode 100644
index 0000000..18df1e9
--- /dev/null
+++ b/drivers/acpi/apei/apei-internal.h
@@ -0,0 +1,114 @@
+/*
+ * apei-internal.h - ACPI Platform Error Interface internal
+ * definations.
+ */
+
+#ifndef APEI_INTERNAL_H
+#define APEI_INTERNAL_H
+
+#include <linux/cper.h>
+
+struct apei_exec_context;
+
+typedef int (*apei_exec_ins_func_t)(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry);
+
+#define APEI_EXEC_INS_ACCESS_REGISTER 0x0001
+
+struct apei_exec_ins_type {
+ u32 flags;
+ apei_exec_ins_func_t run;
+};
+
+struct apei_exec_context {
+ u32 ip;
+ u64 value;
+ u64 var1;
+ u64 var2;
+ u64 src_base;
+ u64 dst_base;
+ struct apei_exec_ins_type *ins_table;
+ u32 instructions;
+ struct acpi_whea_header *action_table;
+ u32 entries;
+};
+
+void apei_exec_ctx_init(struct apei_exec_context *ctx,
+ struct apei_exec_ins_type *ins_table,
+ u32 instructions,
+ struct acpi_whea_header *action_table,
+ u32 entries);
+
+static inline void apei_exec_ctx_set_input(struct apei_exec_context *ctx,
+ u64 input)
+{
+ ctx->value = input;
+}
+
+static inline u64 apei_exec_ctx_get_output(struct apei_exec_context *ctx)
+{
+ return ctx->value;
+}
+
+int apei_exec_run(struct apei_exec_context *ctx, u8 action);
+
+/* Common instruction implementation */
+
+/* IP has been set in instruction function */
+#define APEI_EXEC_SET_IP 1
+
+int __apei_exec_read_register(struct acpi_whea_header *entry, u64 *val);
+int __apei_exec_write_register(struct acpi_whea_header *entry, u64 val);
+int apei_exec_read_register(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry);
+int apei_exec_read_register_value(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry);
+int apei_exec_write_register(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry);
+int apei_exec_write_register_value(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry);
+int apei_exec_noop(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry);
+int apei_exec_pre_map_gars(struct apei_exec_context *ctx);
+int apei_exec_post_unmap_gars(struct apei_exec_context *ctx);
+
+struct apei_resources {
+ struct list_head iomem;
+ struct list_head ioport;
+};
+
+static inline void apei_resources_init(struct apei_resources *resources)
+{
+ INIT_LIST_HEAD(&resources->iomem);
+ INIT_LIST_HEAD(&resources->ioport);
+}
+
+void apei_resources_fini(struct apei_resources *resources);
+int apei_resources_sub(struct apei_resources *resources1,
+ struct apei_resources *resources2);
+int apei_resources_request(struct apei_resources *resources,
+ const char *desc);
+void apei_resources_release(struct apei_resources *resources);
+int apei_exec_collect_resources(struct apei_exec_context *ctx,
+ struct apei_resources *resources);
+
+struct dentry;
+struct dentry *apei_get_debugfs_dir(void);
+
+#define apei_estatus_for_each_section(estatus, section) \
+ for (section = (struct acpi_hest_generic_data *)(estatus + 1); \
+ (void *)section - (void *)estatus < estatus->data_length; \
+ section = (void *)(section+1) + section->error_data_length)
+
+static inline u32 apei_estatus_len(struct acpi_hest_generic_status *estatus)
+{
+ if (estatus->raw_data_length)
+ return estatus->raw_data_offset + \
+ estatus->raw_data_length;
+ else
+ return sizeof(*estatus) + estatus->data_length;
+}
+
+int apei_estatus_check_header(const struct acpi_hest_generic_status *estatus);
+int apei_estatus_check(const struct acpi_hest_generic_status *estatus);
+#endif
diff --git a/drivers/acpi/apei/cper.c b/drivers/acpi/apei/cper.c
new file mode 100644
index 0000000..f4cf2fc
--- /dev/null
+++ b/drivers/acpi/apei/cper.c
@@ -0,0 +1,84 @@
+/*
+ * UEFI Common Platform Error Record (CPER) support
+ *
+ * Copyright (C) 2010, Intel Corp.
+ * Author: Huang Ying <ying.huang@intel.com>
+ *
+ * CPER is the format used to describe platform hardware error by
+ * various APEI tables, such as ERST, BERT and HEST etc.
+ *
+ * For more information about CPER, please refer to Appendix N of UEFI
+ * Specification version 2.3.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/time.h>
+#include <linux/cper.h>
+#include <linux/acpi.h>
+
+/*
+ * CPER record ID need to be unique even after reboot, because record
+ * ID is used as index for ERST storage, while CPER records from
+ * multiple boot may co-exist in ERST.
+ */
+u64 cper_next_record_id(void)
+{
+ static atomic64_t seq;
+
+ if (!atomic64_read(&seq))
+ atomic64_set(&seq, ((u64)get_seconds()) << 32);
+
+ return atomic64_inc_return(&seq);
+}
+EXPORT_SYMBOL_GPL(cper_next_record_id);
+
+int apei_estatus_check_header(const struct acpi_hest_generic_status *estatus)
+{
+ if (estatus->data_length &&
+ estatus->data_length < sizeof(struct acpi_hest_generic_data))
+ return -EINVAL;
+ if (estatus->raw_data_length &&
+ estatus->raw_data_offset < sizeof(*estatus) + estatus->data_length)
+ return -EINVAL;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(apei_estatus_check_header);
+
+int apei_estatus_check(const struct acpi_hest_generic_status *estatus)
+{
+ struct acpi_hest_generic_data *gdata;
+ unsigned int data_len, gedata_len;
+ int rc;
+
+ rc = apei_estatus_check_header(estatus);
+ if (rc)
+ return rc;
+ data_len = estatus->data_length;
+ gdata = (struct acpi_hest_generic_data *)(estatus + 1);
+ while (data_len > sizeof(*gdata)) {
+ gedata_len = gdata->error_data_length;
+ if (gedata_len > data_len - sizeof(*gdata))
+ return -EINVAL;
+ data_len -= gedata_len + sizeof(*gdata);
+ }
+ if (data_len)
+ return -EINVAL;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(apei_estatus_check);
diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c
new file mode 100644
index 0000000..465c885
--- /dev/null
+++ b/drivers/acpi/apei/einj.c
@@ -0,0 +1,548 @@
+/*
+ * APEI Error INJection support
+ *
+ * EINJ provides a hardware error injection mechanism, this is useful
+ * for debugging and testing of other APEI and RAS features.
+ *
+ * For more information about EINJ, please refer to ACPI Specification
+ * version 4.0, section 17.5.
+ *
+ * Copyright 2009-2010 Intel Corp.
+ * Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/nmi.h>
+#include <linux/delay.h>
+#include <acpi/acpi.h>
+
+#include "apei-internal.h"
+
+#define EINJ_PFX "EINJ: "
+
+#define SPIN_UNIT 100 /* 100ns */
+/* Firmware should respond within 1 miliseconds */
+#define FIRMWARE_TIMEOUT (1 * NSEC_PER_MSEC)
+
+/*
+ * Some BIOSes allow parameters to the SET_ERROR_TYPE entries in the
+ * EINJ table through an unpublished extension. Use with caution as
+ * most will ignore the parameter and make their own choice of address
+ * for error injection.
+ */
+struct einj_parameter {
+ u64 type;
+ u64 reserved1;
+ u64 reserved2;
+ u64 param1;
+ u64 param2;
+};
+
+#define EINJ_OP_BUSY 0x1
+#define EINJ_STATUS_SUCCESS 0x0
+#define EINJ_STATUS_FAIL 0x1
+#define EINJ_STATUS_INVAL 0x2
+
+#define EINJ_TAB_ENTRY(tab) \
+ ((struct acpi_whea_header *)((char *)(tab) + \
+ sizeof(struct acpi_table_einj)))
+
+static struct acpi_table_einj *einj_tab;
+
+static struct apei_resources einj_resources;
+
+static struct apei_exec_ins_type einj_ins_type[] = {
+ [ACPI_EINJ_READ_REGISTER] = {
+ .flags = APEI_EXEC_INS_ACCESS_REGISTER,
+ .run = apei_exec_read_register,
+ },
+ [ACPI_EINJ_READ_REGISTER_VALUE] = {
+ .flags = APEI_EXEC_INS_ACCESS_REGISTER,
+ .run = apei_exec_read_register_value,
+ },
+ [ACPI_EINJ_WRITE_REGISTER] = {
+ .flags = APEI_EXEC_INS_ACCESS_REGISTER,
+ .run = apei_exec_write_register,
+ },
+ [ACPI_EINJ_WRITE_REGISTER_VALUE] = {
+ .flags = APEI_EXEC_INS_ACCESS_REGISTER,
+ .run = apei_exec_write_register_value,
+ },
+ [ACPI_EINJ_NOOP] = {
+ .flags = 0,
+ .run = apei_exec_noop,
+ },
+};
+
+/*
+ * Prevent EINJ interpreter to run simultaneously, because the
+ * corresponding firmware implementation may not work properly when
+ * invoked simultaneously.
+ */
+static DEFINE_MUTEX(einj_mutex);
+
+static struct einj_parameter *einj_param;
+
+static void einj_exec_ctx_init(struct apei_exec_context *ctx)
+{
+ apei_exec_ctx_init(ctx, einj_ins_type, ARRAY_SIZE(einj_ins_type),
+ EINJ_TAB_ENTRY(einj_tab), einj_tab->entries);
+}
+
+static int __einj_get_available_error_type(u32 *type)
+{
+ struct apei_exec_context ctx;
+ int rc;
+
+ einj_exec_ctx_init(&ctx);
+ rc = apei_exec_run(&ctx, ACPI_EINJ_GET_ERROR_TYPE);
+ if (rc)
+ return rc;
+ *type = apei_exec_ctx_get_output(&ctx);
+
+ return 0;
+}
+
+/* Get error injection capabilities of the platform */
+static int einj_get_available_error_type(u32 *type)
+{
+ int rc;
+
+ mutex_lock(&einj_mutex);
+ rc = __einj_get_available_error_type(type);
+ mutex_unlock(&einj_mutex);
+
+ return rc;
+}
+
+static int einj_timedout(u64 *t)
+{
+ if ((s64)*t < SPIN_UNIT) {
+ pr_warning(FW_WARN EINJ_PFX
+ "Firmware does not respond in time\n");
+ return 1;
+ }
+ *t -= SPIN_UNIT;
+ ndelay(SPIN_UNIT);
+ touch_nmi_watchdog();
+ return 0;
+}
+
+static u64 einj_get_parameter_address(void)
+{
+ int i;
+ u64 paddr = 0;
+ struct acpi_whea_header *entry;
+
+ entry = EINJ_TAB_ENTRY(einj_tab);
+ for (i = 0; i < einj_tab->entries; i++) {
+ if (entry->action == ACPI_EINJ_SET_ERROR_TYPE &&
+ entry->instruction == ACPI_EINJ_WRITE_REGISTER &&
+ entry->register_region.space_id ==
+ ACPI_ADR_SPACE_SYSTEM_MEMORY)
+ memcpy(&paddr, &entry->register_region.address,
+ sizeof(paddr));
+ entry++;
+ }
+
+ return paddr;
+}
+
+/* do sanity check to trigger table */
+static int einj_check_trigger_header(struct acpi_einj_trigger *trigger_tab)
+{
+ if (trigger_tab->header_size != sizeof(struct acpi_einj_trigger))
+ return -EINVAL;
+ if (trigger_tab->table_size > PAGE_SIZE ||
+ trigger_tab->table_size <= trigger_tab->header_size)
+ return -EINVAL;
+ if (trigger_tab->entry_count !=
+ (trigger_tab->table_size - trigger_tab->header_size) /
+ sizeof(struct acpi_einj_entry))
+ return -EINVAL;
+
+ return 0;
+}
+
+/* Execute instructions in trigger error action table */
+static int __einj_error_trigger(u64 trigger_paddr)
+{
+ struct acpi_einj_trigger *trigger_tab = NULL;
+ struct apei_exec_context trigger_ctx;
+ struct apei_resources trigger_resources;
+ struct acpi_whea_header *trigger_entry;
+ struct resource *r;
+ u32 table_size;
+ int rc = -EIO;
+
+ r = request_mem_region(trigger_paddr, sizeof(*trigger_tab),
+ "APEI EINJ Trigger Table");
+ if (!r) {
+ pr_err(EINJ_PFX
+ "Can not request iomem region <%016llx-%016llx> for Trigger table.\n",
+ (unsigned long long)trigger_paddr,
+ (unsigned long long)trigger_paddr+sizeof(*trigger_tab));
+ goto out;
+ }
+ trigger_tab = ioremap_cache(trigger_paddr, sizeof(*trigger_tab));
+ if (!trigger_tab) {
+ pr_err(EINJ_PFX "Failed to map trigger table!\n");
+ goto out_rel_header;
+ }
+ rc = einj_check_trigger_header(trigger_tab);
+ if (rc) {
+ pr_warning(FW_BUG EINJ_PFX
+ "The trigger error action table is invalid\n");
+ goto out_rel_header;
+ }
+ rc = -EIO;
+ table_size = trigger_tab->table_size;
+ r = request_mem_region(trigger_paddr + sizeof(*trigger_tab),
+ table_size - sizeof(*trigger_tab),
+ "APEI EINJ Trigger Table");
+ if (!r) {
+ pr_err(EINJ_PFX
+"Can not request iomem region <%016llx-%016llx> for Trigger Table Entry.\n",
+ (unsigned long long)trigger_paddr+sizeof(*trigger_tab),
+ (unsigned long long)trigger_paddr + table_size);
+ goto out_rel_header;
+ }
+ iounmap(trigger_tab);
+ trigger_tab = ioremap_cache(trigger_paddr, table_size);
+ if (!trigger_tab) {
+ pr_err(EINJ_PFX "Failed to map trigger table!\n");
+ goto out_rel_entry;
+ }
+ trigger_entry = (struct acpi_whea_header *)
+ ((char *)trigger_tab + sizeof(struct acpi_einj_trigger));
+ apei_resources_init(&trigger_resources);
+ apei_exec_ctx_init(&trigger_ctx, einj_ins_type,
+ ARRAY_SIZE(einj_ins_type),
+ trigger_entry, trigger_tab->entry_count);
+ rc = apei_exec_collect_resources(&trigger_ctx, &trigger_resources);
+ if (rc)
+ goto out_fini;
+ rc = apei_resources_sub(&trigger_resources, &einj_resources);
+ if (rc)
+ goto out_fini;
+ rc = apei_resources_request(&trigger_resources, "APEI EINJ Trigger");
+ if (rc)
+ goto out_fini;
+ rc = apei_exec_pre_map_gars(&trigger_ctx);
+ if (rc)
+ goto out_release;
+
+ rc = apei_exec_run(&trigger_ctx, ACPI_EINJ_TRIGGER_ERROR);
+
+ apei_exec_post_unmap_gars(&trigger_ctx);
+out_release:
+ apei_resources_release(&trigger_resources);
+out_fini:
+ apei_resources_fini(&trigger_resources);
+out_rel_entry:
+ release_mem_region(trigger_paddr + sizeof(*trigger_tab),
+ table_size - sizeof(*trigger_tab));
+out_rel_header:
+ release_mem_region(trigger_paddr, sizeof(*trigger_tab));
+out:
+ if (trigger_tab)
+ iounmap(trigger_tab);
+
+ return rc;
+}
+
+static int __einj_error_inject(u32 type, u64 param1, u64 param2)
+{
+ struct apei_exec_context ctx;
+ u64 val, trigger_paddr, timeout = FIRMWARE_TIMEOUT;
+ int rc;
+
+ einj_exec_ctx_init(&ctx);
+
+ rc = apei_exec_run(&ctx, ACPI_EINJ_BEGIN_OPERATION);
+ if (rc)
+ return rc;
+ apei_exec_ctx_set_input(&ctx, type);
+ rc = apei_exec_run(&ctx, ACPI_EINJ_SET_ERROR_TYPE);
+ if (rc)
+ return rc;
+ if (einj_param) {
+ writeq(param1, &einj_param->param1);
+ writeq(param2, &einj_param->param2);
+ }
+ rc = apei_exec_run(&ctx, ACPI_EINJ_EXECUTE_OPERATION);
+ if (rc)
+ return rc;
+ for (;;) {
+ rc = apei_exec_run(&ctx, ACPI_EINJ_CHECK_BUSY_STATUS);
+ if (rc)
+ return rc;
+ val = apei_exec_ctx_get_output(&ctx);
+ if (!(val & EINJ_OP_BUSY))
+ break;
+ if (einj_timedout(&timeout))
+ return -EIO;
+ }
+ rc = apei_exec_run(&ctx, ACPI_EINJ_GET_COMMAND_STATUS);
+ if (rc)
+ return rc;
+ val = apei_exec_ctx_get_output(&ctx);
+ if (val != EINJ_STATUS_SUCCESS)
+ return -EBUSY;
+
+ rc = apei_exec_run(&ctx, ACPI_EINJ_GET_TRIGGER_TABLE);
+ if (rc)
+ return rc;
+ trigger_paddr = apei_exec_ctx_get_output(&ctx);
+ rc = __einj_error_trigger(trigger_paddr);
+ if (rc)
+ return rc;
+ rc = apei_exec_run(&ctx, ACPI_EINJ_END_OPERATION);
+
+ return rc;
+}
+
+/* Inject the specified hardware error */
+static int einj_error_inject(u32 type, u64 param1, u64 param2)
+{
+ int rc;
+
+ mutex_lock(&einj_mutex);
+ rc = __einj_error_inject(type, param1, param2);
+ mutex_unlock(&einj_mutex);
+
+ return rc;
+}
+
+static u32 error_type;
+static u64 error_param1;
+static u64 error_param2;
+static struct dentry *einj_debug_dir;
+
+static int available_error_type_show(struct seq_file *m, void *v)
+{
+ int rc;
+ u32 available_error_type = 0;
+
+ rc = einj_get_available_error_type(&available_error_type);
+ if (rc)
+ return rc;
+ if (available_error_type & 0x0001)
+ seq_printf(m, "0x00000001\tProcessor Correctable\n");
+ if (available_error_type & 0x0002)
+ seq_printf(m, "0x00000002\tProcessor Uncorrectable non-fatal\n");
+ if (available_error_type & 0x0004)
+ seq_printf(m, "0x00000004\tProcessor Uncorrectable fatal\n");
+ if (available_error_type & 0x0008)
+ seq_printf(m, "0x00000008\tMemory Correctable\n");
+ if (available_error_type & 0x0010)
+ seq_printf(m, "0x00000010\tMemory Uncorrectable non-fatal\n");
+ if (available_error_type & 0x0020)
+ seq_printf(m, "0x00000020\tMemory Uncorrectable fatal\n");
+ if (available_error_type & 0x0040)
+ seq_printf(m, "0x00000040\tPCI Express Correctable\n");
+ if (available_error_type & 0x0080)
+ seq_printf(m, "0x00000080\tPCI Express Uncorrectable non-fatal\n");
+ if (available_error_type & 0x0100)
+ seq_printf(m, "0x00000100\tPCI Express Uncorrectable fatal\n");
+ if (available_error_type & 0x0200)
+ seq_printf(m, "0x00000200\tPlatform Correctable\n");
+ if (available_error_type & 0x0400)
+ seq_printf(m, "0x00000400\tPlatform Uncorrectable non-fatal\n");
+ if (available_error_type & 0x0800)
+ seq_printf(m, "0x00000800\tPlatform Uncorrectable fatal\n");
+
+ return 0;
+}
+
+static int available_error_type_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, available_error_type_show, NULL);
+}
+
+static const struct file_operations available_error_type_fops = {
+ .open = available_error_type_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int error_type_get(void *data, u64 *val)
+{
+ *val = error_type;
+
+ return 0;
+}
+
+static int error_type_set(void *data, u64 val)
+{
+ int rc;
+ u32 available_error_type = 0;
+
+ /* Only one error type can be specified */
+ if (val & (val - 1))
+ return -EINVAL;
+ rc = einj_get_available_error_type(&available_error_type);
+ if (rc)
+ return rc;
+ if (!(val & available_error_type))
+ return -EINVAL;
+ error_type = val;
+
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(error_type_fops, error_type_get,
+ error_type_set, "0x%llx\n");
+
+static int error_inject_set(void *data, u64 val)
+{
+ if (!error_type)
+ return -EINVAL;
+
+ return einj_error_inject(error_type, error_param1, error_param2);
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(error_inject_fops, NULL,
+ error_inject_set, "%llu\n");
+
+static int einj_check_table(struct acpi_table_einj *einj_tab)
+{
+ if (einj_tab->header_length != sizeof(struct acpi_table_einj))
+ return -EINVAL;
+ if (einj_tab->header.length < sizeof(struct acpi_table_einj))
+ return -EINVAL;
+ if (einj_tab->entries !=
+ (einj_tab->header.length - sizeof(struct acpi_table_einj)) /
+ sizeof(struct acpi_einj_entry))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int __init einj_init(void)
+{
+ int rc;
+ u64 param_paddr;
+ acpi_status status;
+ struct dentry *fentry;
+ struct apei_exec_context ctx;
+
+ if (acpi_disabled)
+ return -ENODEV;
+
+ status = acpi_get_table(ACPI_SIG_EINJ, 0,
+ (struct acpi_table_header **)&einj_tab);
+ if (status == AE_NOT_FOUND) {
+ pr_info(EINJ_PFX "Table is not found!\n");
+ return -ENODEV;
+ } else if (ACPI_FAILURE(status)) {
+ const char *msg = acpi_format_exception(status);
+ pr_err(EINJ_PFX "Failed to get table, %s\n", msg);
+ return -EINVAL;
+ }
+
+ rc = einj_check_table(einj_tab);
+ if (rc) {
+ pr_warning(FW_BUG EINJ_PFX "EINJ table is invalid\n");
+ return -EINVAL;
+ }
+
+ rc = -ENOMEM;
+ einj_debug_dir = debugfs_create_dir("einj", apei_get_debugfs_dir());
+ if (!einj_debug_dir)
+ goto err_cleanup;
+ fentry = debugfs_create_file("available_error_type", S_IRUSR,
+ einj_debug_dir, NULL,
+ &available_error_type_fops);
+ if (!fentry)
+ goto err_cleanup;
+ fentry = debugfs_create_file("error_type", S_IRUSR | S_IWUSR,
+ einj_debug_dir, NULL, &error_type_fops);
+ if (!fentry)
+ goto err_cleanup;
+ fentry = debugfs_create_x64("param1", S_IRUSR | S_IWUSR,
+ einj_debug_dir, &error_param1);
+ if (!fentry)
+ goto err_cleanup;
+ fentry = debugfs_create_x64("param2", S_IRUSR | S_IWUSR,
+ einj_debug_dir, &error_param2);
+ if (!fentry)
+ goto err_cleanup;
+ fentry = debugfs_create_file("error_inject", S_IWUSR,
+ einj_debug_dir, NULL, &error_inject_fops);
+ if (!fentry)
+ goto err_cleanup;
+
+ apei_resources_init(&einj_resources);
+ einj_exec_ctx_init(&ctx);
+ rc = apei_exec_collect_resources(&ctx, &einj_resources);
+ if (rc)
+ goto err_fini;
+ rc = apei_resources_request(&einj_resources, "APEI EINJ");
+ if (rc)
+ goto err_fini;
+ rc = apei_exec_pre_map_gars(&ctx);
+ if (rc)
+ goto err_release;
+ param_paddr = einj_get_parameter_address();
+ if (param_paddr) {
+ einj_param = ioremap(param_paddr, sizeof(*einj_param));
+ rc = -ENOMEM;
+ if (!einj_param)
+ goto err_unmap;
+ }
+
+ pr_info(EINJ_PFX "Error INJection is initialized.\n");
+
+ return 0;
+
+err_unmap:
+ apei_exec_post_unmap_gars(&ctx);
+err_release:
+ apei_resources_release(&einj_resources);
+err_fini:
+ apei_resources_fini(&einj_resources);
+err_cleanup:
+ debugfs_remove_recursive(einj_debug_dir);
+
+ return rc;
+}
+
+static void __exit einj_exit(void)
+{
+ struct apei_exec_context ctx;
+
+ if (einj_param)
+ iounmap(einj_param);
+ einj_exec_ctx_init(&ctx);
+ apei_exec_post_unmap_gars(&ctx);
+ apei_resources_release(&einj_resources);
+ apei_resources_fini(&einj_resources);
+ debugfs_remove_recursive(einj_debug_dir);
+}
+
+module_init(einj_init);
+module_exit(einj_exit);
+
+MODULE_AUTHOR("Huang Ying");
+MODULE_DESCRIPTION("APEI Error INJection support");
+MODULE_LICENSE("GPL");
diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
new file mode 100644
index 0000000..864dd46
--- /dev/null
+++ b/drivers/acpi/apei/erst.c
@@ -0,0 +1,855 @@
+/*
+ * APEI Error Record Serialization Table support
+ *
+ * ERST is a way provided by APEI to save and retrieve hardware error
+ * infomation to and from a persistent store.
+ *
+ * For more information about ERST, please refer to ACPI Specification
+ * version 4.0, section 17.4.
+ *
+ * Copyright 2010 Intel Corp.
+ * Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/acpi.h>
+#include <linux/uaccess.h>
+#include <linux/cper.h>
+#include <linux/nmi.h>
+#include <acpi/apei.h>
+
+#include "apei-internal.h"
+
+#define ERST_PFX "ERST: "
+
+/* ERST command status */
+#define ERST_STATUS_SUCCESS 0x0
+#define ERST_STATUS_NOT_ENOUGH_SPACE 0x1
+#define ERST_STATUS_HARDWARE_NOT_AVAILABLE 0x2
+#define ERST_STATUS_FAILED 0x3
+#define ERST_STATUS_RECORD_STORE_EMPTY 0x4
+#define ERST_STATUS_RECORD_NOT_FOUND 0x5
+
+#define ERST_TAB_ENTRY(tab) \
+ ((struct acpi_whea_header *)((char *)(tab) + \
+ sizeof(struct acpi_table_erst)))
+
+#define SPIN_UNIT 100 /* 100ns */
+/* Firmware should respond within 1 miliseconds */
+#define FIRMWARE_TIMEOUT (1 * NSEC_PER_MSEC)
+#define FIRMWARE_MAX_STALL 50 /* 50us */
+
+int erst_disable;
+EXPORT_SYMBOL_GPL(erst_disable);
+
+static struct acpi_table_erst *erst_tab;
+
+/* ERST Error Log Address Range atrributes */
+#define ERST_RANGE_RESERVED 0x0001
+#define ERST_RANGE_NVRAM 0x0002
+#define ERST_RANGE_SLOW 0x0004
+
+/*
+ * ERST Error Log Address Range, used as buffer for reading/writing
+ * error records.
+ */
+static struct erst_erange {
+ u64 base;
+ u64 size;
+ void __iomem *vaddr;
+ u32 attr;
+} erst_erange;
+
+/*
+ * Prevent ERST interpreter to run simultaneously, because the
+ * corresponding firmware implementation may not work properly when
+ * invoked simultaneously.
+ *
+ * It is used to provide exclusive accessing for ERST Error Log
+ * Address Range too.
+ */
+static DEFINE_SPINLOCK(erst_lock);
+
+static inline int erst_errno(int command_status)
+{
+ switch (command_status) {
+ case ERST_STATUS_SUCCESS:
+ return 0;
+ case ERST_STATUS_HARDWARE_NOT_AVAILABLE:
+ return -ENODEV;
+ case ERST_STATUS_NOT_ENOUGH_SPACE:
+ return -ENOSPC;
+ case ERST_STATUS_RECORD_STORE_EMPTY:
+ case ERST_STATUS_RECORD_NOT_FOUND:
+ return -ENOENT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int erst_timedout(u64 *t, u64 spin_unit)
+{
+ if ((s64)*t < spin_unit) {
+ pr_warning(FW_WARN ERST_PFX
+ "Firmware does not respond in time\n");
+ return 1;
+ }
+ *t -= spin_unit;
+ ndelay(spin_unit);
+ touch_nmi_watchdog();
+ return 0;
+}
+
+static int erst_exec_load_var1(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry)
+{
+ return __apei_exec_read_register(entry, &ctx->var1);
+}
+
+static int erst_exec_load_var2(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry)
+{
+ return __apei_exec_read_register(entry, &ctx->var2);
+}
+
+static int erst_exec_store_var1(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry)
+{
+ return __apei_exec_write_register(entry, ctx->var1);
+}
+
+static int erst_exec_add(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry)
+{
+ ctx->var1 += ctx->var2;
+ return 0;
+}
+
+static int erst_exec_subtract(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry)
+{
+ ctx->var1 -= ctx->var2;
+ return 0;
+}
+
+static int erst_exec_add_value(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry)
+{
+ int rc;
+ u64 val;
+
+ rc = __apei_exec_read_register(entry, &val);
+ if (rc)
+ return rc;
+ val += ctx->value;
+ rc = __apei_exec_write_register(entry, val);
+ return rc;
+}
+
+static int erst_exec_subtract_value(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry)
+{
+ int rc;
+ u64 val;
+
+ rc = __apei_exec_read_register(entry, &val);
+ if (rc)
+ return rc;
+ val -= ctx->value;
+ rc = __apei_exec_write_register(entry, val);
+ return rc;
+}
+
+static int erst_exec_stall(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry)
+{
+ u64 stall_time;
+
+ if (ctx->value > FIRMWARE_MAX_STALL) {
+ if (!in_nmi())
+ pr_warning(FW_WARN ERST_PFX
+ "Too long stall time for stall instruction: %llx.\n",
+ ctx->value);
+ stall_time = FIRMWARE_MAX_STALL;
+ } else
+ stall_time = ctx->value;
+ udelay(stall_time);
+ return 0;
+}
+
+static int erst_exec_stall_while_true(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry)
+{
+ int rc;
+ u64 val;
+ u64 timeout = FIRMWARE_TIMEOUT;
+ u64 stall_time;
+
+ if (ctx->var1 > FIRMWARE_MAX_STALL) {
+ if (!in_nmi())
+ pr_warning(FW_WARN ERST_PFX
+ "Too long stall time for stall while true instruction: %llx.\n",
+ ctx->var1);
+ stall_time = FIRMWARE_MAX_STALL;
+ } else
+ stall_time = ctx->var1;
+
+ for (;;) {
+ rc = __apei_exec_read_register(entry, &val);
+ if (rc)
+ return rc;
+ if (val != ctx->value)
+ break;
+ if (erst_timedout(&timeout, stall_time * NSEC_PER_USEC))
+ return -EIO;
+ }
+ return 0;
+}
+
+static int erst_exec_skip_next_instruction_if_true(
+ struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry)
+{
+ int rc;
+ u64 val;
+
+ rc = __apei_exec_read_register(entry, &val);
+ if (rc)
+ return rc;
+ if (val == ctx->value) {
+ ctx->ip += 2;
+ return APEI_EXEC_SET_IP;
+ }
+
+ return 0;
+}
+
+static int erst_exec_goto(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry)
+{
+ ctx->ip = ctx->value;
+ return APEI_EXEC_SET_IP;
+}
+
+static int erst_exec_set_src_address_base(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry)
+{
+ return __apei_exec_read_register(entry, &ctx->src_base);
+}
+
+static int erst_exec_set_dst_address_base(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry)
+{
+ return __apei_exec_read_register(entry, &ctx->dst_base);
+}
+
+static int erst_exec_move_data(struct apei_exec_context *ctx,
+ struct acpi_whea_header *entry)
+{
+ int rc;
+ u64 offset;
+
+ rc = __apei_exec_read_register(entry, &offset);
+ if (rc)
+ return rc;
+ memmove((void *)ctx->dst_base + offset,
+ (void *)ctx->src_base + offset,
+ ctx->var2);
+
+ return 0;
+}
+
+static struct apei_exec_ins_type erst_ins_type[] = {
+ [ACPI_ERST_READ_REGISTER] = {
+ .flags = APEI_EXEC_INS_ACCESS_REGISTER,
+ .run = apei_exec_read_register,
+ },
+ [ACPI_ERST_READ_REGISTER_VALUE] = {
+ .flags = APEI_EXEC_INS_ACCESS_REGISTER,
+ .run = apei_exec_read_register_value,
+ },
+ [ACPI_ERST_WRITE_REGISTER] = {
+ .flags = APEI_EXEC_INS_ACCESS_REGISTER,
+ .run = apei_exec_write_register,
+ },
+ [ACPI_ERST_WRITE_REGISTER_VALUE] = {
+ .flags = APEI_EXEC_INS_ACCESS_REGISTER,
+ .run = apei_exec_write_register_value,
+ },
+ [ACPI_ERST_NOOP] = {
+ .flags = 0,
+ .run = apei_exec_noop,
+ },
+ [ACPI_ERST_LOAD_VAR1] = {
+ .flags = APEI_EXEC_INS_ACCESS_REGISTER,
+ .run = erst_exec_load_var1,
+ },
+ [ACPI_ERST_LOAD_VAR2] = {
+ .flags = APEI_EXEC_INS_ACCESS_REGISTER,
+ .run = erst_exec_load_var2,
+ },
+ [ACPI_ERST_STORE_VAR1] = {
+ .flags = APEI_EXEC_INS_ACCESS_REGISTER,
+ .run = erst_exec_store_var1,
+ },
+ [ACPI_ERST_ADD] = {
+ .flags = 0,
+ .run = erst_exec_add,
+ },
+ [ACPI_ERST_SUBTRACT] = {
+ .flags = 0,
+ .run = erst_exec_subtract,
+ },
+ [ACPI_ERST_ADD_VALUE] = {
+ .flags = APEI_EXEC_INS_ACCESS_REGISTER,
+ .run = erst_exec_add_value,
+ },
+ [ACPI_ERST_SUBTRACT_VALUE] = {
+ .flags = APEI_EXEC_INS_ACCESS_REGISTER,
+ .run = erst_exec_subtract_value,
+ },
+ [ACPI_ERST_STALL] = {
+ .flags = 0,
+ .run = erst_exec_stall,
+ },
+ [ACPI_ERST_STALL_WHILE_TRUE] = {
+ .flags = APEI_EXEC_INS_ACCESS_REGISTER,
+ .run = erst_exec_stall_while_true,
+ },
+ [ACPI_ERST_SKIP_NEXT_IF_TRUE] = {
+ .flags = APEI_EXEC_INS_ACCESS_REGISTER,
+ .run = erst_exec_skip_next_instruction_if_true,
+ },
+ [ACPI_ERST_GOTO] = {
+ .flags = 0,
+ .run = erst_exec_goto,
+ },
+ [ACPI_ERST_SET_SRC_ADDRESS_BASE] = {
+ .flags = APEI_EXEC_INS_ACCESS_REGISTER,
+ .run = erst_exec_set_src_address_base,
+ },
+ [ACPI_ERST_SET_DST_ADDRESS_BASE] = {
+ .flags = APEI_EXEC_INS_ACCESS_REGISTER,
+ .run = erst_exec_set_dst_address_base,
+ },
+ [ACPI_ERST_MOVE_DATA] = {
+ .flags = APEI_EXEC_INS_ACCESS_REGISTER,
+ .run = erst_exec_move_data,
+ },
+};
+
+static inline void erst_exec_ctx_init(struct apei_exec_context *ctx)
+{
+ apei_exec_ctx_init(ctx, erst_ins_type, ARRAY_SIZE(erst_ins_type),
+ ERST_TAB_ENTRY(erst_tab), erst_tab->entries);
+}
+
+static int erst_get_erange(struct erst_erange *range)
+{
+ struct apei_exec_context ctx;
+ int rc;
+
+ erst_exec_ctx_init(&ctx);
+ rc = apei_exec_run(&ctx, ACPI_ERST_GET_ERROR_RANGE);
+ if (rc)
+ return rc;
+ range->base = apei_exec_ctx_get_output(&ctx);
+ rc = apei_exec_run(&ctx, ACPI_ERST_GET_ERROR_LENGTH);
+ if (rc)
+ return rc;
+ range->size = apei_exec_ctx_get_output(&ctx);
+ rc = apei_exec_run(&ctx, ACPI_ERST_GET_ERROR_ATTRIBUTES);
+ if (rc)
+ return rc;
+ range->attr = apei_exec_ctx_get_output(&ctx);
+
+ return 0;
+}
+
+static ssize_t __erst_get_record_count(void)
+{
+ struct apei_exec_context ctx;
+ int rc;
+
+ erst_exec_ctx_init(&ctx);
+ rc = apei_exec_run(&ctx, ACPI_ERST_GET_RECORD_COUNT);
+ if (rc)
+ return rc;
+ return apei_exec_ctx_get_output(&ctx);
+}
+
+ssize_t erst_get_record_count(void)
+{
+ ssize_t count;
+ unsigned long flags;
+
+ if (erst_disable)
+ return -ENODEV;
+
+ spin_lock_irqsave(&erst_lock, flags);
+ count = __erst_get_record_count();
+ spin_unlock_irqrestore(&erst_lock, flags);
+
+ return count;
+}
+EXPORT_SYMBOL_GPL(erst_get_record_count);
+
+static int __erst_get_next_record_id(u64 *record_id)
+{
+ struct apei_exec_context ctx;
+ int rc;
+
+ erst_exec_ctx_init(&ctx);
+ rc = apei_exec_run(&ctx, ACPI_ERST_GET_RECORD_ID);
+ if (rc)
+ return rc;
+ *record_id = apei_exec_ctx_get_output(&ctx);
+
+ return 0;
+}
+
+/*
+ * Get the record ID of an existing error record on the persistent
+ * storage. If there is no error record on the persistent storage, the
+ * returned record_id is APEI_ERST_INVALID_RECORD_ID.
+ */
+int erst_get_next_record_id(u64 *record_id)
+{
+ int rc;
+ unsigned long flags;
+
+ if (erst_disable)
+ return -ENODEV;
+
+ spin_lock_irqsave(&erst_lock, flags);
+ rc = __erst_get_next_record_id(record_id);
+ spin_unlock_irqrestore(&erst_lock, flags);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(erst_get_next_record_id);
+
+static int __erst_write_to_storage(u64 offset)
+{
+ struct apei_exec_context ctx;
+ u64 timeout = FIRMWARE_TIMEOUT;
+ u64 val;
+ int rc;
+
+ erst_exec_ctx_init(&ctx);
+ rc = apei_exec_run(&ctx, ACPI_ERST_BEGIN_WRITE);
+ if (rc)
+ return rc;
+ apei_exec_ctx_set_input(&ctx, offset);
+ rc = apei_exec_run(&ctx, ACPI_ERST_SET_RECORD_OFFSET);
+ if (rc)
+ return rc;
+ rc = apei_exec_run(&ctx, ACPI_ERST_EXECUTE_OPERATION);
+ if (rc)
+ return rc;
+ for (;;) {
+ rc = apei_exec_run(&ctx, ACPI_ERST_CHECK_BUSY_STATUS);
+ if (rc)
+ return rc;
+ val = apei_exec_ctx_get_output(&ctx);
+ if (!val)
+ break;
+ if (erst_timedout(&timeout, SPIN_UNIT))
+ return -EIO;
+ }
+ rc = apei_exec_run(&ctx, ACPI_ERST_GET_COMMAND_STATUS);
+ if (rc)
+ return rc;
+ val = apei_exec_ctx_get_output(&ctx);
+ rc = apei_exec_run(&ctx, ACPI_ERST_END);
+ if (rc)
+ return rc;
+
+ return erst_errno(val);
+}
+
+static int __erst_read_from_storage(u64 record_id, u64 offset)
+{
+ struct apei_exec_context ctx;
+ u64 timeout = FIRMWARE_TIMEOUT;
+ u64 val;
+ int rc;
+
+ erst_exec_ctx_init(&ctx);
+ rc = apei_exec_run(&ctx, ACPI_ERST_BEGIN_READ);
+ if (rc)
+ return rc;
+ apei_exec_ctx_set_input(&ctx, offset);
+ rc = apei_exec_run(&ctx, ACPI_ERST_SET_RECORD_OFFSET);
+ if (rc)
+ return rc;
+ apei_exec_ctx_set_input(&ctx, record_id);
+ rc = apei_exec_run(&ctx, ACPI_ERST_SET_RECORD_ID);
+ if (rc)
+ return rc;
+ rc = apei_exec_run(&ctx, ACPI_ERST_EXECUTE_OPERATION);
+ if (rc)
+ return rc;
+ for (;;) {
+ rc = apei_exec_run(&ctx, ACPI_ERST_CHECK_BUSY_STATUS);
+ if (rc)
+ return rc;
+ val = apei_exec_ctx_get_output(&ctx);
+ if (!val)
+ break;
+ if (erst_timedout(&timeout, SPIN_UNIT))
+ return -EIO;
+ };
+ rc = apei_exec_run(&ctx, ACPI_ERST_GET_COMMAND_STATUS);
+ if (rc)
+ return rc;
+ val = apei_exec_ctx_get_output(&ctx);
+ rc = apei_exec_run(&ctx, ACPI_ERST_END);
+ if (rc)
+ return rc;
+
+ return erst_errno(val);
+}
+
+static int __erst_clear_from_storage(u64 record_id)
+{
+ struct apei_exec_context ctx;
+ u64 timeout = FIRMWARE_TIMEOUT;
+ u64 val;
+ int rc;
+
+ erst_exec_ctx_init(&ctx);
+ rc = apei_exec_run(&ctx, ACPI_ERST_BEGIN_CLEAR);
+ if (rc)
+ return rc;
+ apei_exec_ctx_set_input(&ctx, record_id);
+ rc = apei_exec_run(&ctx, ACPI_ERST_SET_RECORD_ID);
+ if (rc)
+ return rc;
+ rc = apei_exec_run(&ctx, ACPI_ERST_EXECUTE_OPERATION);
+ if (rc)
+ return rc;
+ for (;;) {
+ rc = apei_exec_run(&ctx, ACPI_ERST_CHECK_BUSY_STATUS);
+ if (rc)
+ return rc;
+ val = apei_exec_ctx_get_output(&ctx);
+ if (!val)
+ break;
+ if (erst_timedout(&timeout, SPIN_UNIT))
+ return -EIO;
+ }
+ rc = apei_exec_run(&ctx, ACPI_ERST_GET_COMMAND_STATUS);
+ if (rc)
+ return rc;
+ val = apei_exec_ctx_get_output(&ctx);
+ rc = apei_exec_run(&ctx, ACPI_ERST_END);
+ if (rc)
+ return rc;
+
+ return erst_errno(val);
+}
+
+/* NVRAM ERST Error Log Address Range is not supported yet */
+static void pr_unimpl_nvram(void)
+{
+ if (printk_ratelimit())
+ pr_warning(ERST_PFX
+ "NVRAM ERST Log Address Range is not implemented yet\n");
+}
+
+static int __erst_write_to_nvram(const struct cper_record_header *record)
+{
+ /* do not print message, because printk is not safe for NMI */
+ return -ENOSYS;
+}
+
+static int __erst_read_to_erange_from_nvram(u64 record_id, u64 *offset)
+{
+ pr_unimpl_nvram();
+ return -ENOSYS;
+}
+
+static int __erst_clear_from_nvram(u64 record_id)
+{
+ pr_unimpl_nvram();
+ return -ENOSYS;
+}
+
+int erst_write(const struct cper_record_header *record)
+{
+ int rc;
+ unsigned long flags;
+ struct cper_record_header *rcd_erange;
+
+ if (erst_disable)
+ return -ENODEV;
+
+ if (memcmp(record->signature, CPER_SIG_RECORD, CPER_SIG_SIZE))
+ return -EINVAL;
+
+ if (erst_erange.attr & ERST_RANGE_NVRAM) {
+ if (!spin_trylock_irqsave(&erst_lock, flags))
+ return -EBUSY;
+ rc = __erst_write_to_nvram(record);
+ spin_unlock_irqrestore(&erst_lock, flags);
+ return rc;
+ }
+
+ if (record->record_length > erst_erange.size)
+ return -EINVAL;
+
+ if (!spin_trylock_irqsave(&erst_lock, flags))
+ return -EBUSY;
+ memcpy(erst_erange.vaddr, record, record->record_length);
+ rcd_erange = erst_erange.vaddr;
+ /* signature for serialization system */
+ memcpy(&rcd_erange->persistence_information, "ER", 2);
+
+ rc = __erst_write_to_storage(0);
+ spin_unlock_irqrestore(&erst_lock, flags);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(erst_write);
+
+static int __erst_read_to_erange(u64 record_id, u64 *offset)
+{
+ int rc;
+
+ if (erst_erange.attr & ERST_RANGE_NVRAM)
+ return __erst_read_to_erange_from_nvram(
+ record_id, offset);
+
+ rc = __erst_read_from_storage(record_id, 0);
+ if (rc)
+ return rc;
+ *offset = 0;
+
+ return 0;
+}
+
+static ssize_t __erst_read(u64 record_id, struct cper_record_header *record,
+ size_t buflen)
+{
+ int rc;
+ u64 offset, len = 0;
+ struct cper_record_header *rcd_tmp;
+
+ rc = __erst_read_to_erange(record_id, &offset);
+ if (rc)
+ return rc;
+ rcd_tmp = erst_erange.vaddr + offset;
+ len = rcd_tmp->record_length;
+ if (len <= buflen)
+ memcpy(record, rcd_tmp, len);
+
+ return len;
+}
+
+/*
+ * If return value > buflen, the buffer size is not big enough,
+ * else if return value < 0, something goes wrong,
+ * else everything is OK, and return value is record length
+ */
+ssize_t erst_read(u64 record_id, struct cper_record_header *record,
+ size_t buflen)
+{
+ ssize_t len;
+ unsigned long flags;
+
+ if (erst_disable)
+ return -ENODEV;
+
+ spin_lock_irqsave(&erst_lock, flags);
+ len = __erst_read(record_id, record, buflen);
+ spin_unlock_irqrestore(&erst_lock, flags);
+ return len;
+}
+EXPORT_SYMBOL_GPL(erst_read);
+
+/*
+ * If return value > buflen, the buffer size is not big enough,
+ * else if return value = 0, there is no more record to read,
+ * else if return value < 0, something goes wrong,
+ * else everything is OK, and return value is record length
+ */
+ssize_t erst_read_next(struct cper_record_header *record, size_t buflen)
+{
+ int rc;
+ ssize_t len;
+ unsigned long flags;
+ u64 record_id;
+
+ if (erst_disable)
+ return -ENODEV;
+
+ spin_lock_irqsave(&erst_lock, flags);
+ rc = __erst_get_next_record_id(&record_id);
+ if (rc) {
+ spin_unlock_irqrestore(&erst_lock, flags);
+ return rc;
+ }
+ /* no more record */
+ if (record_id == APEI_ERST_INVALID_RECORD_ID) {
+ spin_unlock_irqrestore(&erst_lock, flags);
+ return 0;
+ }
+
+ len = __erst_read(record_id, record, buflen);
+ spin_unlock_irqrestore(&erst_lock, flags);
+
+ return len;
+}
+EXPORT_SYMBOL_GPL(erst_read_next);
+
+int erst_clear(u64 record_id)
+{
+ int rc;
+ unsigned long flags;
+
+ if (erst_disable)
+ return -ENODEV;
+
+ spin_lock_irqsave(&erst_lock, flags);
+ if (erst_erange.attr & ERST_RANGE_NVRAM)
+ rc = __erst_clear_from_nvram(record_id);
+ else
+ rc = __erst_clear_from_storage(record_id);
+ spin_unlock_irqrestore(&erst_lock, flags);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(erst_clear);
+
+static int __init setup_erst_disable(char *str)
+{
+ erst_disable = 1;
+ return 0;
+}
+
+__setup("erst_disable", setup_erst_disable);
+
+static int erst_check_table(struct acpi_table_erst *erst_tab)
+{
+ if (erst_tab->header_length != sizeof(struct acpi_table_erst))
+ return -EINVAL;
+ if (erst_tab->header.length < sizeof(struct acpi_table_erst))
+ return -EINVAL;
+ if (erst_tab->entries !=
+ (erst_tab->header.length - sizeof(struct acpi_table_erst)) /
+ sizeof(struct acpi_erst_entry))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int __init erst_init(void)
+{
+ int rc = 0;
+ acpi_status status;
+ struct apei_exec_context ctx;
+ struct apei_resources erst_resources;
+ struct resource *r;
+
+ if (acpi_disabled)
+ goto err;
+
+ if (erst_disable) {
+ pr_info(ERST_PFX
+ "Error Record Serialization Table (ERST) support is disabled.\n");
+ goto err;
+ }
+
+ status = acpi_get_table(ACPI_SIG_ERST, 0,
+ (struct acpi_table_header **)&erst_tab);
+ if (status == AE_NOT_FOUND) {
+ pr_info(ERST_PFX "Table is not found!\n");
+ goto err;
+ } else if (ACPI_FAILURE(status)) {
+ const char *msg = acpi_format_exception(status);
+ pr_err(ERST_PFX "Failed to get table, %s\n", msg);
+ rc = -EINVAL;
+ goto err;
+ }
+
+ rc = erst_check_table(erst_tab);
+ if (rc) {
+ pr_err(FW_BUG ERST_PFX "ERST table is invalid\n");
+ goto err;
+ }
+
+ apei_resources_init(&erst_resources);
+ erst_exec_ctx_init(&ctx);
+ rc = apei_exec_collect_resources(&ctx, &erst_resources);
+ if (rc)
+ goto err_fini;
+ rc = apei_resources_request(&erst_resources, "APEI ERST");
+ if (rc)
+ goto err_fini;
+ rc = apei_exec_pre_map_gars(&ctx);
+ if (rc)
+ goto err_release;
+ rc = erst_get_erange(&erst_erange);
+ if (rc) {
+ if (rc == -ENODEV)
+ pr_info(ERST_PFX
+ "The corresponding hardware device or firmware implementation "
+ "is not available.\n");
+ else
+ pr_err(ERST_PFX
+ "Failed to get Error Log Address Range.\n");
+ goto err_unmap_reg;
+ }
+
+ r = request_mem_region(erst_erange.base, erst_erange.size, "APEI ERST");
+ if (!r) {
+ pr_err(ERST_PFX
+ "Can not request iomem region <0x%16llx-0x%16llx> for ERST.\n",
+ (unsigned long long)erst_erange.base,
+ (unsigned long long)erst_erange.base + erst_erange.size);
+ rc = -EIO;
+ goto err_unmap_reg;
+ }
+ rc = -ENOMEM;
+ erst_erange.vaddr = ioremap_cache(erst_erange.base,
+ erst_erange.size);
+ if (!erst_erange.vaddr)
+ goto err_release_erange;
+
+ pr_info(ERST_PFX
+ "Error Record Serialization Table (ERST) support is initialized.\n");
+
+ return 0;
+
+err_release_erange:
+ release_mem_region(erst_erange.base, erst_erange.size);
+err_unmap_reg:
+ apei_exec_post_unmap_gars(&ctx);
+err_release:
+ apei_resources_release(&erst_resources);
+err_fini:
+ apei_resources_fini(&erst_resources);
+err:
+ erst_disable = 1;
+ return rc;
+}
+
+device_initcall(erst_init);
diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
new file mode 100644
index 0000000..fd0cc01
--- /dev/null
+++ b/drivers/acpi/apei/ghes.c
@@ -0,0 +1,427 @@
+/*
+ * APEI Generic Hardware Error Source support
+ *
+ * Generic Hardware Error Source provides a way to report platform
+ * hardware errors (such as that from chipset). It works in so called
+ * "Firmware First" mode, that is, hardware errors are reported to
+ * firmware firstly, then reported to Linux by firmware. This way,
+ * some non-standard hardware error registers or non-standard hardware
+ * link can be checked by firmware to produce more hardware error
+ * information for Linux.
+ *
+ * For more information about Generic Hardware Error Source, please
+ * refer to ACPI Specification version 4.0, section 17.3.2.6
+ *
+ * Now, only SCI notification type and memory errors are
+ * supported. More notification type and hardware error type will be
+ * added later.
+ *
+ * Copyright 2010 Intel Corp.
+ * Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation;
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/cper.h>
+#include <linux/kdebug.h>
+#include <acpi/apei.h>
+#include <acpi/atomicio.h>
+#include <acpi/hed.h>
+#include <asm/mce.h>
+
+#include "apei-internal.h"
+
+#define GHES_PFX "GHES: "
+
+#define GHES_ESTATUS_MAX_SIZE 65536
+
+/*
+ * One struct ghes is created for each generic hardware error
+ * source.
+ *
+ * It provides the context for APEI hardware error timer/IRQ/SCI/NMI
+ * handler. Handler for one generic hardware error source is only
+ * triggered after the previous one is done. So handler can uses
+ * struct ghes without locking.
+ *
+ * estatus: memory buffer for error status block, allocated during
+ * HEST parsing.
+ */
+#define GHES_TO_CLEAR 0x0001
+
+struct ghes {
+ struct acpi_hest_generic *generic;
+ struct acpi_hest_generic_status *estatus;
+ struct list_head list;
+ u64 buffer_paddr;
+ unsigned long flags;
+};
+
+/*
+ * Error source lists, one list for each notification method. The
+ * members in lists are struct ghes.
+ *
+ * The list members are only added in HEST parsing and deleted during
+ * module_exit, that is, single-threaded. So no lock is needed for
+ * that.
+ *
+ * But the mutual exclusion is needed between members adding/deleting
+ * and timer/IRQ/SCI/NMI handler, which may traverse the list. RCU is
+ * used for that.
+ */
+static LIST_HEAD(ghes_sci);
+
+static struct ghes *ghes_new(struct acpi_hest_generic *generic)
+{
+ struct ghes *ghes;
+ unsigned int error_block_length;
+ int rc;
+
+ ghes = kzalloc(sizeof(*ghes), GFP_KERNEL);
+ if (!ghes)
+ return ERR_PTR(-ENOMEM);
+ ghes->generic = generic;
+ INIT_LIST_HEAD(&ghes->list);
+ rc = acpi_pre_map_gar(&generic->error_status_address);
+ if (rc)
+ goto err_free;
+ error_block_length = generic->error_block_length;
+ if (error_block_length > GHES_ESTATUS_MAX_SIZE) {
+ pr_warning(FW_WARN GHES_PFX
+ "Error status block length is too long: %u for "
+ "generic hardware error source: %d.\n",
+ error_block_length, generic->header.source_id);
+ error_block_length = GHES_ESTATUS_MAX_SIZE;
+ }
+ ghes->estatus = kmalloc(error_block_length, GFP_KERNEL);
+ if (!ghes->estatus) {
+ rc = -ENOMEM;
+ goto err_unmap;
+ }
+
+ return ghes;
+
+err_unmap:
+ acpi_post_unmap_gar(&generic->error_status_address);
+err_free:
+ kfree(ghes);
+ return ERR_PTR(rc);
+}
+
+static void ghes_fini(struct ghes *ghes)
+{
+ kfree(ghes->estatus);
+ acpi_post_unmap_gar(&ghes->generic->error_status_address);
+}
+
+enum {
+ GHES_SER_NO = 0x0,
+ GHES_SER_CORRECTED = 0x1,
+ GHES_SER_RECOVERABLE = 0x2,
+ GHES_SER_PANIC = 0x3,
+};
+
+static inline int ghes_severity(int severity)
+{
+ switch (severity) {
+ case CPER_SER_INFORMATIONAL:
+ return GHES_SER_NO;
+ case CPER_SER_CORRECTED:
+ return GHES_SER_CORRECTED;
+ case CPER_SER_RECOVERABLE:
+ return GHES_SER_RECOVERABLE;
+ case CPER_SER_FATAL:
+ return GHES_SER_PANIC;
+ default:
+ /* Unkown, go panic */
+ return GHES_SER_PANIC;
+ }
+}
+
+/* SCI handler run in work queue, so ioremap can be used here */
+static int ghes_copy_tofrom_phys(void *buffer, u64 paddr, u32 len,
+ int from_phys)
+{
+ void *vaddr;
+
+ vaddr = ioremap_cache(paddr, len);
+ if (!vaddr)
+ return -ENOMEM;
+ if (from_phys)
+ memcpy(buffer, vaddr, len);
+ else
+ memcpy(vaddr, buffer, len);
+ iounmap(vaddr);
+
+ return 0;
+}
+
+static int ghes_read_estatus(struct ghes *ghes, int silent)
+{
+ struct acpi_hest_generic *g = ghes->generic;
+ u64 buf_paddr;
+ u32 len;
+ int rc;
+
+ rc = acpi_atomic_read(&buf_paddr, &g->error_status_address);
+ if (rc) {
+ if (!silent && printk_ratelimit())
+ pr_warning(FW_WARN GHES_PFX
+"Failed to read error status block address for hardware error source: %d.\n",
+ g->header.source_id);
+ return -EIO;
+ }
+ if (!buf_paddr)
+ return -ENOENT;
+
+ rc = ghes_copy_tofrom_phys(ghes->estatus, buf_paddr,
+ sizeof(*ghes->estatus), 1);
+ if (rc)
+ return rc;
+ if (!ghes->estatus->block_status)
+ return -ENOENT;
+
+ ghes->buffer_paddr = buf_paddr;
+ ghes->flags |= GHES_TO_CLEAR;
+
+ rc = -EIO;
+ len = apei_estatus_len(ghes->estatus);
+ if (len < sizeof(*ghes->estatus))
+ goto err_read_block;
+ if (len > ghes->generic->error_block_length)
+ goto err_read_block;
+ if (apei_estatus_check_header(ghes->estatus))
+ goto err_read_block;
+ rc = ghes_copy_tofrom_phys(ghes->estatus + 1,
+ buf_paddr + sizeof(*ghes->estatus),
+ len - sizeof(*ghes->estatus), 1);
+ if (rc)
+ return rc;
+ if (apei_estatus_check(ghes->estatus))
+ goto err_read_block;
+ rc = 0;
+
+err_read_block:
+ if (rc && !silent)
+ pr_warning(FW_WARN GHES_PFX
+ "Failed to read error status block!\n");
+ return rc;
+}
+
+static void ghes_clear_estatus(struct ghes *ghes)
+{
+ ghes->estatus->block_status = 0;
+ if (!(ghes->flags & GHES_TO_CLEAR))
+ return;
+ ghes_copy_tofrom_phys(ghes->estatus, ghes->buffer_paddr,
+ sizeof(ghes->estatus->block_status), 0);
+ ghes->flags &= ~GHES_TO_CLEAR;
+}
+
+static void ghes_do_proc(struct ghes *ghes)
+{
+ int ser, processed = 0;
+ struct acpi_hest_generic_data *gdata;
+
+ ser = ghes_severity(ghes->estatus->error_severity);
+ apei_estatus_for_each_section(ghes->estatus, gdata) {
+#ifdef CONFIG_X86_MCE
+ if (!uuid_le_cmp(*(uuid_le *)gdata->section_type,
+ CPER_SEC_PLATFORM_MEM)) {
+ apei_mce_report_mem_error(
+ ser == GHES_SER_CORRECTED,
+ (struct cper_sec_mem_err *)(gdata+1));
+ processed = 1;
+ }
+#endif
+ }
+
+ if (!processed && printk_ratelimit())
+ pr_warning(GHES_PFX
+ "Unknown error record from generic hardware error source: %d\n",
+ ghes->generic->header.source_id);
+}
+
+static int ghes_proc(struct ghes *ghes)
+{
+ int rc;
+
+ rc = ghes_read_estatus(ghes, 0);
+ if (rc)
+ goto out;
+ ghes_do_proc(ghes);
+
+out:
+ ghes_clear_estatus(ghes);
+ return 0;
+}
+
+static int ghes_notify_sci(struct notifier_block *this,
+ unsigned long event, void *data)
+{
+ struct ghes *ghes;
+ int ret = NOTIFY_DONE;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(ghes, &ghes_sci, list) {
+ if (!ghes_proc(ghes))
+ ret = NOTIFY_OK;
+ }
+ rcu_read_unlock();
+
+ return ret;
+}
+
+static struct notifier_block ghes_notifier_sci = {
+ .notifier_call = ghes_notify_sci,
+};
+
+static int hest_ghes_parse(struct acpi_hest_header *hest_hdr, void *data)
+{
+ struct acpi_hest_generic *generic;
+ struct ghes *ghes = NULL;
+ int rc = 0;
+
+ if (hest_hdr->type != ACPI_HEST_TYPE_GENERIC_ERROR)
+ return 0;
+
+ generic = (struct acpi_hest_generic *)hest_hdr;
+ if (!generic->enabled)
+ return 0;
+
+ if (generic->error_block_length <
+ sizeof(struct acpi_hest_generic_status)) {
+ pr_warning(FW_BUG GHES_PFX
+"Invalid error block length: %u for generic hardware error source: %d\n",
+ generic->error_block_length,
+ generic->header.source_id);
+ goto err;
+ }
+ if (generic->records_to_preallocate == 0) {
+ pr_warning(FW_BUG GHES_PFX
+"Invalid records to preallocate: %u for generic hardware error source: %d\n",
+ generic->records_to_preallocate,
+ generic->header.source_id);
+ goto err;
+ }
+ ghes = ghes_new(generic);
+ if (IS_ERR(ghes)) {
+ rc = PTR_ERR(ghes);
+ ghes = NULL;
+ goto err;
+ }
+ switch (generic->notify.type) {
+ case ACPI_HEST_NOTIFY_POLLED:
+ pr_warning(GHES_PFX
+"Generic hardware error source: %d notified via POLL is not supported!\n",
+ generic->header.source_id);
+ break;
+ case ACPI_HEST_NOTIFY_EXTERNAL:
+ case ACPI_HEST_NOTIFY_LOCAL:
+ pr_warning(GHES_PFX
+"Generic hardware error source: %d notified via IRQ is not supported!\n",
+ generic->header.source_id);
+ break;
+ case ACPI_HEST_NOTIFY_SCI:
+ if (list_empty(&ghes_sci))
+ register_acpi_hed_notifier(&ghes_notifier_sci);
+ list_add_rcu(&ghes->list, &ghes_sci);
+ break;
+ case ACPI_HEST_NOTIFY_NMI:
+ pr_warning(GHES_PFX
+"Generic hardware error source: %d notified via NMI is not supported!\n",
+ generic->header.source_id);
+ break;
+ default:
+ pr_warning(FW_WARN GHES_PFX
+ "Unknown notification type: %u for generic hardware error source: %d\n",
+ generic->notify.type, generic->header.source_id);
+ break;
+ }
+
+ return 0;
+err:
+ if (ghes)
+ ghes_fini(ghes);
+ return rc;
+}
+
+static void ghes_cleanup(void)
+{
+ struct ghes *ghes, *nghes;
+
+ if (!list_empty(&ghes_sci))
+ unregister_acpi_hed_notifier(&ghes_notifier_sci);
+
+ synchronize_rcu();
+
+ list_for_each_entry_safe(ghes, nghes, &ghes_sci, list) {
+ list_del(&ghes->list);
+ ghes_fini(ghes);
+ kfree(ghes);
+ }
+}
+
+static int __init ghes_init(void)
+{
+ int rc;
+
+ if (acpi_disabled)
+ return -ENODEV;
+
+ if (hest_disable) {
+ pr_info(GHES_PFX "HEST is not enabled!\n");
+ return -EINVAL;
+ }
+
+ rc = apei_hest_parse(hest_ghes_parse, NULL);
+ if (rc) {
+ pr_err(GHES_PFX
+ "Error during parsing HEST generic hardware error sources.\n");
+ goto err_cleanup;
+ }
+
+ if (list_empty(&ghes_sci)) {
+ pr_info(GHES_PFX
+ "No functional generic hardware error sources.\n");
+ rc = -ENODEV;
+ goto err_cleanup;
+ }
+
+ pr_info(GHES_PFX
+ "Generic Hardware Error Source support is initialized.\n");
+
+ return 0;
+err_cleanup:
+ ghes_cleanup();
+ return rc;
+}
+
+static void __exit ghes_exit(void)
+{
+ ghes_cleanup();
+}
+
+module_init(ghes_init);
+module_exit(ghes_exit);
+
+MODULE_AUTHOR("Huang Ying");
+MODULE_DESCRIPTION("APEI Generic Hardware Error Source support");
+MODULE_LICENSE("GPL");
diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c
new file mode 100644
index 0000000..e7f40d3
--- /dev/null
+++ b/drivers/acpi/apei/hest.c
@@ -0,0 +1,173 @@
+/*
+ * APEI Hardware Error Souce Table support
+ *
+ * HEST describes error sources in detail; communicates operational
+ * parameters (i.e. severity levels, masking bits, and threshold
+ * values) to Linux as necessary. It also allows the BIOS to report
+ * non-standard error sources to Linux (for example, chipset-specific
+ * error registers).
+ *
+ * For more information about HEST, please refer to ACPI Specification
+ * version 4.0, section 17.3.2.
+ *
+ * Copyright 2009 Intel Corp.
+ * Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation;
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/kdebug.h>
+#include <linux/highmem.h>
+#include <linux/io.h>
+#include <acpi/apei.h>
+
+#include "apei-internal.h"
+
+#define HEST_PFX "HEST: "
+
+int hest_disable;
+EXPORT_SYMBOL_GPL(hest_disable);
+
+/* HEST table parsing */
+
+static struct acpi_table_hest *hest_tab;
+
+static int hest_void_parse(struct acpi_hest_header *hest_hdr, void *data)
+{
+ return 0;
+}
+
+static int hest_esrc_len_tab[ACPI_HEST_TYPE_RESERVED] = {
+ [ACPI_HEST_TYPE_IA32_CHECK] = -1, /* need further calculation */
+ [ACPI_HEST_TYPE_IA32_CORRECTED_CHECK] = -1,
+ [ACPI_HEST_TYPE_IA32_NMI] = sizeof(struct acpi_hest_ia_nmi),
+ [ACPI_HEST_TYPE_AER_ROOT_PORT] = sizeof(struct acpi_hest_aer_root),
+ [ACPI_HEST_TYPE_AER_ENDPOINT] = sizeof(struct acpi_hest_aer),
+ [ACPI_HEST_TYPE_AER_BRIDGE] = sizeof(struct acpi_hest_aer_bridge),
+ [ACPI_HEST_TYPE_GENERIC_ERROR] = sizeof(struct acpi_hest_generic),
+};
+
+static int hest_esrc_len(struct acpi_hest_header *hest_hdr)
+{
+ u16 hest_type = hest_hdr->type;
+ int len;
+
+ if (hest_type >= ACPI_HEST_TYPE_RESERVED)
+ return 0;
+
+ len = hest_esrc_len_tab[hest_type];
+
+ if (hest_type == ACPI_HEST_TYPE_IA32_CORRECTED_CHECK) {
+ struct acpi_hest_ia_corrected *cmc;
+ cmc = (struct acpi_hest_ia_corrected *)hest_hdr;
+ len = sizeof(*cmc) + cmc->num_hardware_banks *
+ sizeof(struct acpi_hest_ia_error_bank);
+ } else if (hest_type == ACPI_HEST_TYPE_IA32_CHECK) {
+ struct acpi_hest_ia_machine_check *mc;
+ mc = (struct acpi_hest_ia_machine_check *)hest_hdr;
+ len = sizeof(*mc) + mc->num_hardware_banks *
+ sizeof(struct acpi_hest_ia_error_bank);
+ }
+ BUG_ON(len == -1);
+
+ return len;
+};
+
+int apei_hest_parse(apei_hest_func_t func, void *data)
+{
+ struct acpi_hest_header *hest_hdr;
+ int i, rc, len;
+
+ if (hest_disable)
+ return -EINVAL;
+
+ hest_hdr = (struct acpi_hest_header *)(hest_tab + 1);
+ for (i = 0; i < hest_tab->error_source_count; i++) {
+ len = hest_esrc_len(hest_hdr);
+ if (!len) {
+ pr_warning(FW_WARN HEST_PFX
+ "Unknown or unused hardware error source "
+ "type: %d for hardware error source: %d.\n",
+ hest_hdr->type, hest_hdr->source_id);
+ return -EINVAL;
+ }
+ if ((void *)hest_hdr + len >
+ (void *)hest_tab + hest_tab->header.length) {
+ pr_warning(FW_BUG HEST_PFX
+ "Table contents overflow for hardware error source: %d.\n",
+ hest_hdr->source_id);
+ return -EINVAL;
+ }
+
+ rc = func(hest_hdr, data);
+ if (rc)
+ return rc;
+
+ hest_hdr = (void *)hest_hdr + len;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(apei_hest_parse);
+
+static int __init setup_hest_disable(char *str)
+{
+ hest_disable = 1;
+ return 0;
+}
+
+__setup("hest_disable", setup_hest_disable);
+
+static int __init hest_init(void)
+{
+ acpi_status status;
+ int rc = -ENODEV;
+
+ if (acpi_disabled)
+ goto err;
+
+ if (hest_disable) {
+ pr_info(HEST_PFX "HEST tabling parsing is disabled.\n");
+ goto err;
+ }
+
+ status = acpi_get_table(ACPI_SIG_HEST, 0,
+ (struct acpi_table_header **)&hest_tab);
+ if (status == AE_NOT_FOUND) {
+ pr_info(HEST_PFX "Table is not found!\n");
+ goto err;
+ } else if (ACPI_FAILURE(status)) {
+ const char *msg = acpi_format_exception(status);
+ pr_err(HEST_PFX "Failed to get table, %s\n", msg);
+ rc = -EINVAL;
+ goto err;
+ }
+
+ rc = apei_hest_parse(hest_void_parse, NULL);
+ if (rc)
+ goto err;
+
+ pr_info(HEST_PFX "HEST table parsing is initialized.\n");
+
+ return 0;
+err:
+ hest_disable = 1;
+ return rc;
+}
+
+subsys_initcall(hest_init);
diff --git a/drivers/acpi/atomicio.c b/drivers/acpi/atomicio.c
new file mode 100644
index 0000000..8f8bd73
--- /dev/null
+++ b/drivers/acpi/atomicio.c
@@ -0,0 +1,361 @@
+/*
+ * atomicio.c - ACPI IO memory pre-mapping/post-unmapping, then
+ * accessing in atomic context.
+ *
+ * This is used for NMI handler to access IO memory area, because
+ * ioremap/iounmap can not be used in NMI handler. The IO memory area
+ * is pre-mapped in process context and accessed in NMI handler.
+ *
+ * Copyright (C) 2009-2010, Intel Corp.
+ * Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/kref.h>
+#include <linux/rculist.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <acpi/atomicio.h>
+
+#define ACPI_PFX "ACPI: "
+
+static LIST_HEAD(acpi_iomaps);
+/*
+ * Used for mutual exclusion between writers of acpi_iomaps list, for
+ * synchronization between readers and writer, RCU is used.
+ */
+static DEFINE_SPINLOCK(acpi_iomaps_lock);
+
+struct acpi_iomap {
+ struct list_head list;
+ void __iomem *vaddr;
+ unsigned long size;
+ phys_addr_t paddr;
+ struct kref ref;
+};
+
+/* acpi_iomaps_lock or RCU read lock must be held before calling */
+static struct acpi_iomap *__acpi_find_iomap(phys_addr_t paddr,
+ unsigned long size)
+{
+ struct acpi_iomap *map;
+
+ list_for_each_entry_rcu(map, &acpi_iomaps, list) {
+ if (map->paddr + map->size >= paddr + size &&
+ map->paddr <= paddr)
+ return map;
+ }
+ return NULL;
+}
+
+/*
+ * Atomic "ioremap" used by NMI handler, if the specified IO memory
+ * area is not pre-mapped, NULL will be returned.
+ *
+ * acpi_iomaps_lock or RCU read lock must be held before calling
+ */
+static void __iomem *__acpi_ioremap_fast(phys_addr_t paddr,
+ unsigned long size)
+{
+ struct acpi_iomap *map;
+
+ map = __acpi_find_iomap(paddr, size);
+ if (map)
+ return map->vaddr + (paddr - map->paddr);
+ else
+ return NULL;
+}
+
+/* acpi_iomaps_lock must be held before calling */
+static void __iomem *__acpi_try_ioremap(phys_addr_t paddr,
+ unsigned long size)
+{
+ struct acpi_iomap *map;
+
+ map = __acpi_find_iomap(paddr, size);
+ if (map) {
+ kref_get(&map->ref);
+ return map->vaddr + (paddr - map->paddr);
+ } else
+ return NULL;
+}
+
+/*
+ * Used to pre-map the specified IO memory area. First try to find
+ * whether the area is already pre-mapped, if it is, increase the
+ * reference count (in __acpi_try_ioremap) and return; otherwise, do
+ * the real ioremap, and add the mapping into acpi_iomaps list.
+ */
+static void __iomem *acpi_pre_map(phys_addr_t paddr,
+ unsigned long size)
+{
+ void __iomem *vaddr;
+ struct acpi_iomap *map;
+ unsigned long pg_sz, flags;
+ phys_addr_t pg_off;
+
+ spin_lock_irqsave(&acpi_iomaps_lock, flags);
+ vaddr = __acpi_try_ioremap(paddr, size);
+ spin_unlock_irqrestore(&acpi_iomaps_lock, flags);
+ if (vaddr)
+ return vaddr;
+
+ pg_off = paddr & PAGE_MASK;
+ pg_sz = ((paddr + size + PAGE_SIZE - 1) & PAGE_MASK) - pg_off;
+ vaddr = ioremap(pg_off, pg_sz);
+ if (!vaddr)
+ return NULL;
+ map = kmalloc(sizeof(*map), GFP_KERNEL);
+ if (!map)
+ goto err_unmap;
+ INIT_LIST_HEAD(&map->list);
+ map->paddr = pg_off;
+ map->size = pg_sz;
+ map->vaddr = vaddr;
+ kref_init(&map->ref);
+
+ spin_lock_irqsave(&acpi_iomaps_lock, flags);
+ vaddr = __acpi_try_ioremap(paddr, size);
+ if (vaddr) {
+ spin_unlock_irqrestore(&acpi_iomaps_lock, flags);
+ iounmap(map->vaddr);
+ kfree(map);
+ return vaddr;
+ }
+ list_add_tail_rcu(&map->list, &acpi_iomaps);
+ spin_unlock_irqrestore(&acpi_iomaps_lock, flags);
+
+ return vaddr + (paddr - pg_off);
+err_unmap:
+ iounmap(vaddr);
+ return NULL;
+}
+
+/* acpi_iomaps_lock must be held before calling */
+static void __acpi_kref_del_iomap(struct kref *ref)
+{
+ struct acpi_iomap *map;
+
+ map = container_of(ref, struct acpi_iomap, ref);
+ list_del_rcu(&map->list);
+}
+
+/*
+ * Used to post-unmap the specified IO memory area. The iounmap is
+ * done only if the reference count goes zero.
+ */
+static void acpi_post_unmap(phys_addr_t paddr, unsigned long size)
+{
+ struct acpi_iomap *map;
+ unsigned long flags;
+ int del;
+
+ spin_lock_irqsave(&acpi_iomaps_lock, flags);
+ map = __acpi_find_iomap(paddr, size);
+ BUG_ON(!map);
+ del = kref_put(&map->ref, __acpi_kref_del_iomap);
+ spin_unlock_irqrestore(&acpi_iomaps_lock, flags);
+
+ if (!del)
+ return;
+
+ synchronize_rcu();
+ iounmap(map->vaddr);
+ kfree(map);
+}
+
+/* In NMI handler, should set silent = 1 */
+static int acpi_check_gar(struct acpi_generic_address *reg,
+ u64 *paddr, int silent)
+{
+ u32 width, space_id;
+
+ width = reg->bit_width;
+ space_id = reg->space_id;
+ /* Handle possible alignment issues */
+ memcpy(paddr, ®->address, sizeof(*paddr));
+ if (!*paddr) {
+ if (!silent)
+ pr_warning(FW_BUG ACPI_PFX
+ "Invalid physical address in GAR [0x%llx/%u/%u]\n",
+ *paddr, width, space_id);
+ return -EINVAL;
+ }
+
+ if ((width != 8) && (width != 16) && (width != 32) && (width != 64)) {
+ if (!silent)
+ pr_warning(FW_BUG ACPI_PFX
+ "Invalid bit width in GAR [0x%llx/%u/%u]\n",
+ *paddr, width, space_id);
+ return -EINVAL;
+ }
+
+ if (space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY &&
+ space_id != ACPI_ADR_SPACE_SYSTEM_IO) {
+ if (!silent)
+ pr_warning(FW_BUG ACPI_PFX
+ "Invalid address space type in GAR [0x%llx/%u/%u]\n",
+ *paddr, width, space_id);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* Pre-map, working on GAR */
+int acpi_pre_map_gar(struct acpi_generic_address *reg)
+{
+ u64 paddr;
+ void __iomem *vaddr;
+ int rc;
+
+ if (reg->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY)
+ return 0;
+
+ rc = acpi_check_gar(reg, &paddr, 0);
+ if (rc)
+ return rc;
+
+ vaddr = acpi_pre_map(paddr, reg->bit_width / 8);
+ if (!vaddr)
+ return -EIO;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(acpi_pre_map_gar);
+
+/* Post-unmap, working on GAR */
+int acpi_post_unmap_gar(struct acpi_generic_address *reg)
+{
+ u64 paddr;
+ int rc;
+
+ if (reg->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY)
+ return 0;
+
+ rc = acpi_check_gar(reg, &paddr, 0);
+ if (rc)
+ return rc;
+
+ acpi_post_unmap(paddr, reg->bit_width / 8);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(acpi_post_unmap_gar);
+
+/*
+ * Can be used in atomic (including NMI) or process context. RCU read
+ * lock can only be released after the IO memory area accessing.
+ */
+static int acpi_atomic_read_mem(u64 paddr, u64 *val, u32 width)
+{
+ void __iomem *addr;
+
+ rcu_read_lock();
+ addr = __acpi_ioremap_fast(paddr, width);
+ switch (width) {
+ case 8:
+ *val = readb(addr);
+ break;
+ case 16:
+ *val = readw(addr);
+ break;
+ case 32:
+ *val = readl(addr);
+ break;
+ case 64:
+ *val = readq(addr);
+ break;
+ default:
+ return -EINVAL;
+ }
+ rcu_read_unlock();
+
+ return 0;
+}
+
+static int acpi_atomic_write_mem(u64 paddr, u64 val, u32 width)
+{
+ void __iomem *addr;
+
+ rcu_read_lock();
+ addr = __acpi_ioremap_fast(paddr, width);
+ switch (width) {
+ case 8:
+ writeb(val, addr);
+ break;
+ case 16:
+ writew(val, addr);
+ break;
+ case 32:
+ writel(val, addr);
+ break;
+ case 64:
+ writeq(val, addr);
+ break;
+ default:
+ return -EINVAL;
+ }
+ rcu_read_unlock();
+
+ return 0;
+}
+
+/* GAR accessing in atomic (including NMI) or process context */
+int acpi_atomic_read(u64 *val, struct acpi_generic_address *reg)
+{
+ u64 paddr;
+ int rc;
+
+ rc = acpi_check_gar(reg, &paddr, 1);
+ if (rc)
+ return rc;
+
+ *val = 0;
+ switch (reg->space_id) {
+ case ACPI_ADR_SPACE_SYSTEM_MEMORY:
+ return acpi_atomic_read_mem(paddr, val, reg->bit_width);
+ case ACPI_ADR_SPACE_SYSTEM_IO:
+ return acpi_os_read_port(paddr, (u32 *)val, reg->bit_width);
+ default:
+ return -EINVAL;
+ }
+}
+EXPORT_SYMBOL_GPL(acpi_atomic_read);
+
+int acpi_atomic_write(u64 val, struct acpi_generic_address *reg)
+{
+ u64 paddr;
+ int rc;
+
+ rc = acpi_check_gar(reg, &paddr, 1);
+ if (rc)
+ return rc;
+
+ switch (reg->space_id) {
+ case ACPI_ADR_SPACE_SYSTEM_MEMORY:
+ return acpi_atomic_write_mem(paddr, val, reg->bit_width);
+ case ACPI_ADR_SPACE_SYSTEM_IO:
+ return acpi_os_write_port(paddr, val, reg->bit_width);
+ default:
+ return -EINVAL;
+ }
+}
+EXPORT_SYMBOL_GPL(acpi_atomic_write);
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index 2815df6..01381be 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -218,6 +218,14 @@
},
},
{
+ .callback = dmi_disable_osi_vista,
+ .ident = "VGN-NS50B_L",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NS50B_L"),
+ },
+ },
+ {
.callback = dmi_disable_osi_win7,
.ident = "ASUS K50IJ",
.matches = {
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index fd51c4a..7d857da 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -425,7 +425,7 @@
/* Button's GPE is run-wake GPE */
acpi_enable_gpe(device->wakeup.gpe_device,
device->wakeup.gpe_number,
- ACPI_GPE_TYPE_WAKE_RUN);
+ ACPI_GPE_TYPE_RUNTIME);
device->wakeup.run_wake_count++;
device->wakeup.state.enabled = 1;
}
@@ -449,7 +449,7 @@
if (device->wakeup.flags.valid) {
acpi_disable_gpe(device->wakeup.gpe_device,
device->wakeup.gpe_number,
- ACPI_GPE_TYPE_WAKE_RUN);
+ ACPI_GPE_TYPE_RUNTIME);
device->wakeup.run_wake_count--;
device->wakeup.state.enabled = 0;
}
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index f2234db..5f2027d 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -79,7 +79,7 @@
EC_FLAGS_GPE_STORM, /* GPE storm detected */
EC_FLAGS_HANDLERS_INSTALLED, /* Handlers for GPE and
* OpReg are installed */
- EC_FLAGS_FROZEN, /* Transactions are suspended */
+ EC_FLAGS_BLOCKED, /* Transactions are blocked */
};
/* If we find an EC via the ECDT, we need to keep a ptr to its context */
@@ -293,7 +293,7 @@
if (t->rdata)
memset(t->rdata, 0, t->rlen);
mutex_lock(&ec->lock);
- if (test_bit(EC_FLAGS_FROZEN, &ec->flags)) {
+ if (test_bit(EC_FLAGS_BLOCKED, &ec->flags)) {
status = -EINVAL;
goto unlock;
}
@@ -459,7 +459,7 @@
EXPORT_SYMBOL(ec_transaction);
-void acpi_ec_suspend_transactions(void)
+void acpi_ec_block_transactions(void)
{
struct acpi_ec *ec = first_ec;
@@ -468,11 +468,11 @@
mutex_lock(&ec->lock);
/* Prevent transactions from being carried out */
- set_bit(EC_FLAGS_FROZEN, &ec->flags);
+ set_bit(EC_FLAGS_BLOCKED, &ec->flags);
mutex_unlock(&ec->lock);
}
-void acpi_ec_resume_transactions(void)
+void acpi_ec_unblock_transactions(void)
{
struct acpi_ec *ec = first_ec;
@@ -481,10 +481,20 @@
mutex_lock(&ec->lock);
/* Allow transactions to be carried out again */
- clear_bit(EC_FLAGS_FROZEN, &ec->flags);
+ clear_bit(EC_FLAGS_BLOCKED, &ec->flags);
mutex_unlock(&ec->lock);
}
+void acpi_ec_unblock_transactions_early(void)
+{
+ /*
+ * Allow transactions to happen again (this function is called from
+ * atomic context during wakeup, so we don't need to acquire the mutex).
+ */
+ if (first_ec)
+ clear_bit(EC_FLAGS_BLOCKED, &first_ec->flags);
+}
+
static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 * data)
{
int result;
@@ -1027,10 +1037,9 @@
/* Don't trust ECDT, which comes from ASUSTek */
if (!EC_FLAGS_VALIDATE_ECDT)
goto install;
- saved_ec = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+ saved_ec = kmemdup(boot_ec, sizeof(struct acpi_ec), GFP_KERNEL);
if (!saved_ec)
return -ENOMEM;
- memcpy(saved_ec, boot_ec, sizeof(struct acpi_ec));
/* fall through */
}
diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c
index acf2ab2..8a3b840 100644
--- a/drivers/acpi/fan.c
+++ b/drivers/acpi/fan.c
@@ -347,7 +347,6 @@
{
int result = 0;
-
#ifdef CONFIG_ACPI_PROCFS
acpi_fan_dir = proc_mkdir(ACPI_FAN_CLASS, acpi_root_dir);
if (!acpi_fan_dir)
@@ -356,7 +355,9 @@
result = acpi_bus_register_driver(&acpi_fan_driver);
if (result < 0) {
+#ifdef CONFIG_ACPI_PROCFS
remove_proc_entry(ACPI_FAN_CLASS, acpi_root_dir);
+#endif
return -ENODEV;
}
diff --git a/drivers/acpi/hed.c b/drivers/acpi/hed.c
new file mode 100644
index 0000000..d0c1967
--- /dev/null
+++ b/drivers/acpi/hed.c
@@ -0,0 +1,112 @@
+/*
+ * ACPI Hardware Error Device (PNP0C33) Driver
+ *
+ * Copyright (C) 2010, Intel Corp.
+ * Author: Huang Ying <ying.huang@intel.com>
+ *
+ * ACPI Hardware Error Device is used to report some hardware errors
+ * notified via SCI, mainly the corrected errors.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation;
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+#include <acpi/hed.h>
+
+static struct acpi_device_id acpi_hed_ids[] = {
+ {"PNP0C33", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, acpi_hed_ids);
+
+static acpi_handle hed_handle;
+
+static BLOCKING_NOTIFIER_HEAD(acpi_hed_notify_list);
+
+int register_acpi_hed_notifier(struct notifier_block *nb)
+{
+ return blocking_notifier_chain_register(&acpi_hed_notify_list, nb);
+}
+EXPORT_SYMBOL_GPL(register_acpi_hed_notifier);
+
+void unregister_acpi_hed_notifier(struct notifier_block *nb)
+{
+ blocking_notifier_chain_unregister(&acpi_hed_notify_list, nb);
+}
+EXPORT_SYMBOL_GPL(unregister_acpi_hed_notifier);
+
+/*
+ * SCI to report hardware error is forwarded to the listeners of HED,
+ * it is used by HEST Generic Hardware Error Source with notify type
+ * SCI.
+ */
+static void acpi_hed_notify(struct acpi_device *device, u32 event)
+{
+ blocking_notifier_call_chain(&acpi_hed_notify_list, 0, NULL);
+}
+
+static int __devinit acpi_hed_add(struct acpi_device *device)
+{
+ /* Only one hardware error device */
+ if (hed_handle)
+ return -EINVAL;
+ hed_handle = device->handle;
+ return 0;
+}
+
+static int __devexit acpi_hed_remove(struct acpi_device *device, int type)
+{
+ hed_handle = NULL;
+ return 0;
+}
+
+static struct acpi_driver acpi_hed_driver = {
+ .name = "hardware_error_device",
+ .class = "hardware_error",
+ .ids = acpi_hed_ids,
+ .ops = {
+ .add = acpi_hed_add,
+ .remove = acpi_hed_remove,
+ .notify = acpi_hed_notify,
+ },
+};
+
+static int __init acpi_hed_init(void)
+{
+ if (acpi_disabled)
+ return -ENODEV;
+
+ if (acpi_bus_register_driver(&acpi_hed_driver) < 0)
+ return -ENODEV;
+
+ return 0;
+}
+
+static void __exit acpi_hed_exit(void)
+{
+ acpi_bus_unregister_driver(&acpi_hed_driver);
+}
+
+module_init(acpi_hed_init);
+module_exit(acpi_hed_exit);
+
+ACPI_MODULE_NAME("hed");
+MODULE_AUTHOR("Huang Ying");
+MODULE_DESCRIPTION("ACPI Hardware Error Device Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/acpi/hest.c b/drivers/acpi/hest.c
deleted file mode 100644
index 1c527a1..0000000
--- a/drivers/acpi/hest.c
+++ /dev/null
@@ -1,139 +0,0 @@
-#include <linux/acpi.h>
-#include <linux/pci.h>
-
-#define PREFIX "ACPI: "
-
-static inline unsigned long parse_acpi_hest_ia_machine_check(struct acpi_hest_ia_machine_check *p)
-{
- return sizeof(*p) +
- (sizeof(struct acpi_hest_ia_error_bank) * p->num_hardware_banks);
-}
-
-static inline unsigned long parse_acpi_hest_ia_corrected(struct acpi_hest_ia_corrected *p)
-{
- return sizeof(*p) +
- (sizeof(struct acpi_hest_ia_error_bank) * p->num_hardware_banks);
-}
-
-static inline unsigned long parse_acpi_hest_ia_nmi(struct acpi_hest_ia_nmi *p)
-{
- return sizeof(*p);
-}
-
-static inline unsigned long parse_acpi_hest_generic(struct acpi_hest_generic *p)
-{
- return sizeof(*p);
-}
-
-static inline unsigned int hest_match_pci(struct acpi_hest_aer_common *p, struct pci_dev *pci)
-{
- return (0 == pci_domain_nr(pci->bus) &&
- p->bus == pci->bus->number &&
- p->device == PCI_SLOT(pci->devfn) &&
- p->function == PCI_FUNC(pci->devfn));
-}
-
-static unsigned long parse_acpi_hest_aer(void *hdr, int type, struct pci_dev *pci, int *firmware_first)
-{
- struct acpi_hest_aer_common *p = hdr + sizeof(struct acpi_hest_header);
- unsigned long rc=0;
- u8 pcie_type = 0;
- u8 bridge = 0;
- switch (type) {
- case ACPI_HEST_TYPE_AER_ROOT_PORT:
- rc = sizeof(struct acpi_hest_aer_root);
- pcie_type = PCI_EXP_TYPE_ROOT_PORT;
- break;
- case ACPI_HEST_TYPE_AER_ENDPOINT:
- rc = sizeof(struct acpi_hest_aer);
- pcie_type = PCI_EXP_TYPE_ENDPOINT;
- break;
- case ACPI_HEST_TYPE_AER_BRIDGE:
- rc = sizeof(struct acpi_hest_aer_bridge);
- if ((pci->class >> 16) == PCI_BASE_CLASS_BRIDGE)
- bridge = 1;
- break;
- }
-
- if (p->flags & ACPI_HEST_GLOBAL) {
- if ((pci->is_pcie && (pci->pcie_type == pcie_type)) || bridge)
- *firmware_first = !!(p->flags & ACPI_HEST_FIRMWARE_FIRST);
- }
- else
- if (hest_match_pci(p, pci))
- *firmware_first = !!(p->flags & ACPI_HEST_FIRMWARE_FIRST);
- return rc;
-}
-
-static int acpi_hest_firmware_first(struct acpi_table_header *stdheader, struct pci_dev *pci)
-{
- struct acpi_table_hest *hest = (struct acpi_table_hest *)stdheader;
- void *p = (void *)hest + sizeof(*hest); /* defined by the ACPI 4.0 spec */
- struct acpi_hest_header *hdr = p;
-
- int i;
- int firmware_first = 0;
- static unsigned char printed_unused = 0;
- static unsigned char printed_reserved = 0;
-
- for (i=0, hdr=p; p < (((void *)hest) + hest->header.length) && i < hest->error_source_count; i++) {
- switch (hdr->type) {
- case ACPI_HEST_TYPE_IA32_CHECK:
- p += parse_acpi_hest_ia_machine_check(p);
- break;
- case ACPI_HEST_TYPE_IA32_CORRECTED_CHECK:
- p += parse_acpi_hest_ia_corrected(p);
- break;
- case ACPI_HEST_TYPE_IA32_NMI:
- p += parse_acpi_hest_ia_nmi(p);
- break;
- /* These three should never appear */
- case ACPI_HEST_TYPE_NOT_USED3:
- case ACPI_HEST_TYPE_NOT_USED4:
- case ACPI_HEST_TYPE_NOT_USED5:
- if (!printed_unused) {
- printk(KERN_DEBUG PREFIX
- "HEST Error Source list contains an obsolete type (%d).\n", hdr->type);
- printed_unused = 1;
- }
- break;
- case ACPI_HEST_TYPE_AER_ROOT_PORT:
- case ACPI_HEST_TYPE_AER_ENDPOINT:
- case ACPI_HEST_TYPE_AER_BRIDGE:
- p += parse_acpi_hest_aer(p, hdr->type, pci, &firmware_first);
- break;
- case ACPI_HEST_TYPE_GENERIC_ERROR:
- p += parse_acpi_hest_generic(p);
- break;
- /* These should never appear either */
- case ACPI_HEST_TYPE_RESERVED:
- default:
- if (!printed_reserved) {
- printk(KERN_DEBUG PREFIX
- "HEST Error Source list contains a reserved type (%d).\n", hdr->type);
- printed_reserved = 1;
- }
- break;
- }
- }
- return firmware_first;
-}
-
-int acpi_hest_firmware_first_pci(struct pci_dev *pci)
-{
- acpi_status status = AE_NOT_FOUND;
- struct acpi_table_header *hest = NULL;
-
- if (acpi_disabled)
- return 0;
-
- status = acpi_get_table(ACPI_SIG_HEST, 1, &hest);
-
- if (ACPI_SUCCESS(status)) {
- if (acpi_hest_firmware_first(hest, pci)) {
- return 1;
- }
- }
- return 0;
-}
-EXPORT_SYMBOL_GPL(acpi_hest_firmware_first_pci);
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index e284113..f8f190e 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -49,8 +49,9 @@
int acpi_ec_init(void);
int acpi_ec_ecdt_probe(void);
int acpi_boot_ec_enable(void);
-void acpi_ec_suspend_transactions(void);
-void acpi_ec_resume_transactions(void);
+void acpi_ec_block_transactions(void);
+void acpi_ec_unblock_transactions(void);
+void acpi_ec_unblock_transactions_early(void);
/*--------------------------------------------------------------------------
Suspend/Resume
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 4bc1c41..78418ce 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -1207,6 +1207,15 @@
EXPORT_SYMBOL(acpi_check_mem_region);
/*
+ * Let drivers know whether the resource checks are effective
+ */
+int acpi_resources_are_enforced(void)
+{
+ return acpi_enforce_resources == ENFORCE_RESOURCES_STRICT;
+}
+EXPORT_SYMBOL(acpi_resources_are_enforced);
+
+/*
* Acquire a spinlock.
*
* handle is a pointer to the spinlock_t.
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index aefce33..4eac593 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -120,7 +120,8 @@
struct acpi_pci_root *root;
list_for_each_entry(root, &acpi_pci_roots, node)
- if ((root->segment == (u16) seg) && (root->bus_nr == (u16) bus))
+ if ((root->segment == (u16) seg) &&
+ (root->secondary.start == (u16) bus))
return root->device->handle;
return NULL;
}
@@ -154,7 +155,7 @@
static acpi_status
get_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
{
- int *busnr = data;
+ struct resource *res = data;
struct acpi_resource_address64 address;
if (resource->type != ACPI_RESOURCE_TYPE_ADDRESS16 &&
@@ -164,28 +165,27 @@
acpi_resource_to_address64(resource, &address);
if ((address.address_length > 0) &&
- (address.resource_type == ACPI_BUS_NUMBER_RANGE))
- *busnr = address.minimum;
+ (address.resource_type == ACPI_BUS_NUMBER_RANGE)) {
+ res->start = address.minimum;
+ res->end = address.minimum + address.address_length - 1;
+ }
return AE_OK;
}
static acpi_status try_get_root_bridge_busnr(acpi_handle handle,
- unsigned long long *bus)
+ struct resource *res)
{
acpi_status status;
- int busnum;
- busnum = -1;
+ res->start = -1;
status =
acpi_walk_resources(handle, METHOD_NAME__CRS,
- get_root_bridge_busnr_callback, &busnum);
+ get_root_bridge_busnr_callback, res);
if (ACPI_FAILURE(status))
return status;
- /* Check if we really get a bus number from _CRS */
- if (busnum == -1)
+ if (res->start == -1)
return AE_ERROR;
- *bus = busnum;
return AE_OK;
}
@@ -429,34 +429,47 @@
struct acpi_device *child;
u32 flags, base_flags;
+ root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
+ if (!root)
+ return -ENOMEM;
+
segment = 0;
status = acpi_evaluate_integer(device->handle, METHOD_NAME__SEG, NULL,
&segment);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
printk(KERN_ERR PREFIX "can't evaluate _SEG\n");
- return -ENODEV;
+ result = -ENODEV;
+ goto end;
}
/* Check _CRS first, then _BBN. If no _BBN, default to zero. */
- bus = 0;
- status = try_get_root_bridge_busnr(device->handle, &bus);
+ root->secondary.flags = IORESOURCE_BUS;
+ status = try_get_root_bridge_busnr(device->handle, &root->secondary);
if (ACPI_FAILURE(status)) {
+ /*
+ * We need both the start and end of the downstream bus range
+ * to interpret _CBA (MMCONFIG base address), so it really is
+ * supposed to be in _CRS. If we don't find it there, all we
+ * can do is assume [_BBN-0xFF] or [0-0xFF].
+ */
+ root->secondary.end = 0xFF;
+ printk(KERN_WARNING FW_BUG PREFIX
+ "no secondary bus range in _CRS\n");
status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN, NULL, &bus);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- printk(KERN_ERR PREFIX
- "no bus number in _CRS and can't evaluate _BBN\n");
- return -ENODEV;
+ if (ACPI_SUCCESS(status))
+ root->secondary.start = bus;
+ else if (status == AE_NOT_FOUND)
+ root->secondary.start = 0;
+ else {
+ printk(KERN_ERR PREFIX "can't evaluate _BBN\n");
+ result = -ENODEV;
+ goto end;
}
}
- root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
- if (!root)
- return -ENOMEM;
-
INIT_LIST_HEAD(&root->node);
root->device = device;
root->segment = segment & 0xFFFF;
- root->bus_nr = bus & 0xFF;
strcpy(acpi_device_name(device), ACPI_PCI_ROOT_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
device->driver_data = root;
@@ -475,9 +488,9 @@
/* TBD: Locking */
list_add_tail(&root->node, &acpi_pci_roots);
- printk(KERN_INFO PREFIX "%s [%s] (%04x:%02x)\n",
+ printk(KERN_INFO PREFIX "%s [%s] (domain %04x %pR)\n",
acpi_device_name(device), acpi_device_bid(device),
- root->segment, root->bus_nr);
+ root->segment, &root->secondary);
/*
* Scan the Root Bridge
@@ -486,11 +499,11 @@
* PCI namespace does not get created until this call is made (and
* thus the root bridge's pci_dev does not exist).
*/
- root->bus = pci_acpi_scan_root(device, segment, bus);
+ root->bus = pci_acpi_scan_root(root);
if (!root->bus) {
printk(KERN_ERR PREFIX
"Bus %04x:%02x not present in PCI namespace\n",
- root->segment, root->bus_nr);
+ root->segment, (unsigned int)root->secondary.start);
result = -ENODEV;
goto end;
}
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index 5675d97..38ea0cc 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -581,6 +581,11 @@
return 0;
}
+#ifdef CONFIG_SMP
+ if (pr->id >= setup_max_cpus && pr->id != 0)
+ return 0;
+#endif
+
BUG_ON((pr->id >= nr_cpu_ids) || (pr->id < 0));
/*
@@ -616,7 +621,8 @@
acpi_processor_get_limit_info(pr);
- acpi_processor_power_init(pr, device);
+ if (cpuidle_get_driver() == &acpi_idle_driver)
+ acpi_processor_power_init(pr, device);
pr->cdev = thermal_cooling_device_register("Processor", device,
&processor_cooling_ops);
@@ -920,9 +926,14 @@
if (!acpi_processor_dir)
return -ENOMEM;
#endif
- result = cpuidle_register_driver(&acpi_idle_driver);
- if (result < 0)
- goto out_proc;
+
+ if (!cpuidle_register_driver(&acpi_idle_driver)) {
+ printk(KERN_DEBUG "ACPI: %s registered with cpuidle\n",
+ acpi_idle_driver.name);
+ } else {
+ printk(KERN_DEBUG "ACPI: acpi_idle yielding to %s",
+ cpuidle_get_driver()->name);
+ }
result = acpi_bus_register_driver(&acpi_processor_driver);
if (result < 0)
@@ -941,7 +952,6 @@
out_cpuidle:
cpuidle_unregister_driver(&acpi_idle_driver);
-out_proc:
#ifdef CONFIG_ACPI_PROCFS
remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
#endif
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index c3817e1..b1b3856 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -80,7 +80,7 @@
static unsigned int latency_factor __read_mostly = 2;
module_param(latency_factor, uint, 0644);
-static s64 us_to_pm_timer_ticks(s64 t)
+static u64 us_to_pm_timer_ticks(s64 t)
{
return div64_u64(t * PM_TIMER_FREQUENCY, 1000000);
}
@@ -727,24 +727,14 @@
break;
}
- if (pr->power.states[i].promotion.state)
- seq_printf(seq, "promotion[C%zd] ",
- (pr->power.states[i].promotion.state -
- pr->power.states));
- else
- seq_puts(seq, "promotion[--] ");
+ seq_puts(seq, "promotion[--] ");
- if (pr->power.states[i].demotion.state)
- seq_printf(seq, "demotion[C%zd] ",
- (pr->power.states[i].demotion.state -
- pr->power.states));
- else
- seq_puts(seq, "demotion[--] ");
+ seq_puts(seq, "demotion[--] ");
- seq_printf(seq, "latency[%03d] usage[%08d] duration[%020llu]\n",
+ seq_printf(seq, "latency[%03d] usage[%08d] duration[%020Lu]\n",
pr->power.states[i].latency,
pr->power.states[i].usage,
- (unsigned long long)pr->power.states[i].time);
+ us_to_pm_timer_ticks(pr->power.states[i].time));
}
end:
@@ -869,8 +859,8 @@
struct acpi_processor *pr;
struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
ktime_t kt1, kt2;
+ s64 idle_time_ns;
s64 idle_time;
- s64 sleep_ticks = 0;
pr = __get_cpu_var(processors);
@@ -881,6 +871,7 @@
return(acpi_idle_enter_c1(dev, state));
local_irq_disable();
+
if (cx->entry_method != ACPI_CSTATE_FFH) {
current_thread_info()->status &= ~TS_POLLING;
/*
@@ -888,12 +879,12 @@
* NEED_RESCHED:
*/
smp_mb();
- }
- if (unlikely(need_resched())) {
- current_thread_info()->status |= TS_POLLING;
- local_irq_enable();
- return 0;
+ if (unlikely(need_resched())) {
+ current_thread_info()->status |= TS_POLLING;
+ local_irq_enable();
+ return 0;
+ }
}
/*
@@ -910,20 +901,21 @@
sched_clock_idle_sleep_event();
acpi_idle_do_entry(cx);
kt2 = ktime_get_real();
- idle_time = ktime_to_us(ktime_sub(kt2, kt1));
-
- sleep_ticks = us_to_pm_timer_ticks(idle_time);
+ idle_time_ns = ktime_to_ns(ktime_sub(kt2, kt1));
+ idle_time = idle_time_ns;
+ do_div(idle_time, NSEC_PER_USEC);
/* Tell the scheduler how much we idled: */
- sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
+ sched_clock_idle_wakeup_event(idle_time_ns);
local_irq_enable();
- current_thread_info()->status |= TS_POLLING;
+ if (cx->entry_method != ACPI_CSTATE_FFH)
+ current_thread_info()->status |= TS_POLLING;
cx->usage++;
lapic_timer_state_broadcast(pr, cx, 0);
- cx->time += sleep_ticks;
+ cx->time += idle_time;
return idle_time;
}
@@ -943,8 +935,8 @@
struct acpi_processor *pr;
struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
ktime_t kt1, kt2;
+ s64 idle_time_ns;
s64 idle_time;
- s64 sleep_ticks = 0;
pr = __get_cpu_var(processors);
@@ -968,6 +960,7 @@
}
local_irq_disable();
+
if (cx->entry_method != ACPI_CSTATE_FFH) {
current_thread_info()->status &= ~TS_POLLING;
/*
@@ -975,12 +968,12 @@
* NEED_RESCHED:
*/
smp_mb();
- }
- if (unlikely(need_resched())) {
- current_thread_info()->status |= TS_POLLING;
- local_irq_enable();
- return 0;
+ if (unlikely(need_resched())) {
+ current_thread_info()->status |= TS_POLLING;
+ local_irq_enable();
+ return 0;
+ }
}
acpi_unlazy_tlb(smp_processor_id());
@@ -1025,19 +1018,21 @@
spin_unlock(&c3_lock);
}
kt2 = ktime_get_real();
- idle_time = ktime_to_us(ktime_sub(kt2, kt1));
+ idle_time_ns = ktime_to_ns(ktime_sub(kt2, kt1));
+ idle_time = idle_time_ns;
+ do_div(idle_time, NSEC_PER_USEC);
- sleep_ticks = us_to_pm_timer_ticks(idle_time);
/* Tell the scheduler how much we idled: */
- sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
+ sched_clock_idle_wakeup_event(idle_time_ns);
local_irq_enable();
- current_thread_info()->status |= TS_POLLING;
+ if (cx->entry_method != ACPI_CSTATE_FFH)
+ current_thread_info()->status |= TS_POLLING;
cx->usage++;
lapic_timer_state_broadcast(pr, cx, 0);
- cx->time += sleep_ticks;
+ cx->time += idle_time;
return idle_time;
}
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index baa76bb..5b7c52e 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -80,22 +80,6 @@
#ifdef CONFIG_ACPI_SLEEP
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
-/*
- * According to the ACPI specification the BIOS should make sure that ACPI is
- * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still,
- * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
- * on such systems during resume. Unfortunately that doesn't help in
- * particularly pathological cases in which SCI_EN has to be set directly on
- * resume, although the specification states very clearly that this flag is
- * owned by the hardware. The set_sci_en_on_resume variable will be set in such
- * cases.
- */
-static bool set_sci_en_on_resume;
-
-void __init acpi_set_sci_en_on_resume(void)
-{
- set_sci_en_on_resume = true;
-}
/*
* ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
@@ -110,11 +94,13 @@
}
/**
- * acpi_pm_disable_gpes - Disable the GPEs.
+ * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
*/
-static int acpi_pm_disable_gpes(void)
+static int acpi_pm_freeze(void)
{
acpi_disable_all_gpes();
+ acpi_os_wait_events_complete(NULL);
+ acpi_ec_block_transactions();
return 0;
}
@@ -128,6 +114,8 @@
{
int error = acpi_sleep_prepare(acpi_target_sleep_state);
+ suspend_nvs_save();
+
if (error)
acpi_target_sleep_state = ACPI_STATE_S0;
return error;
@@ -142,7 +130,8 @@
int error = __acpi_pm_prepare();
if (!error)
- acpi_disable_all_gpes();
+ acpi_pm_freeze();
+
return error;
}
@@ -156,6 +145,9 @@
{
u32 acpi_state = acpi_target_sleep_state;
+ suspend_nvs_free();
+ acpi_ec_unblock_transactions();
+
if (acpi_state == ACPI_STATE_S0)
return;
@@ -205,6 +197,11 @@
u32 acpi_state = acpi_suspend_states[pm_state];
int error = 0;
+ error = suspend_nvs_alloc();
+
+ if (error)
+ return error;
+
if (sleep_states[acpi_state]) {
acpi_target_sleep_state = acpi_state;
acpi_sleep_tts_switch(acpi_target_sleep_state);
@@ -253,11 +250,8 @@
break;
}
- /* If ACPI is not enabled by the BIOS, we need to enable it here. */
- if (set_sci_en_on_resume)
- acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
- else
- acpi_enable();
+ /* This violates the spec but is required for bug compatibility. */
+ acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
/* Reprogram control registers and execute _BFS */
acpi_leave_sleep_state_prep(acpi_state);
@@ -275,6 +269,8 @@
* acpi_leave_sleep_state will reenable specific GPEs later
*/
acpi_disable_all_gpes();
+ /* Allow EC transactions to happen. */
+ acpi_ec_unblock_transactions_early();
local_irq_restore(flags);
printk(KERN_DEBUG "Back to C!\n");
@@ -283,9 +279,16 @@
if (acpi_state == ACPI_STATE_S3)
acpi_restore_state_mem();
+ suspend_nvs_restore();
+
return ACPI_SUCCESS(status) ? 0 : -EFAULT;
}
+static void acpi_suspend_finish(void)
+{
+ acpi_pm_finish();
+}
+
static int acpi_suspend_state_valid(suspend_state_t pm_state)
{
u32 acpi_state;
@@ -307,7 +310,7 @@
.begin = acpi_suspend_begin,
.prepare_late = acpi_pm_prepare,
.enter = acpi_suspend_enter,
- .wake = acpi_pm_finish,
+ .wake = acpi_suspend_finish,
.end = acpi_pm_end,
};
@@ -333,9 +336,9 @@
static struct platform_suspend_ops acpi_suspend_ops_old = {
.valid = acpi_suspend_state_valid,
.begin = acpi_suspend_begin_old,
- .prepare_late = acpi_pm_disable_gpes,
+ .prepare_late = acpi_pm_freeze,
.enter = acpi_suspend_enter,
- .wake = acpi_pm_finish,
+ .wake = acpi_suspend_finish,
.end = acpi_pm_end,
.recover = acpi_pm_finish,
};
@@ -346,12 +349,6 @@
return 0;
}
-static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d)
-{
- set_sci_en_on_resume = true;
- return 0;
-}
-
static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
{
.callback = init_old_suspend_ordering,
@@ -370,22 +367,6 @@
},
},
{
- .callback = init_set_sci_en_on_resume,
- .ident = "Apple MacBook 1,1",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
- },
- },
- {
- .callback = init_set_sci_en_on_resume,
- .ident = "Apple MacMini 1,1",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
- },
- },
- {
.callback = init_old_suspend_ordering,
.ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
.matches = {
@@ -394,94 +375,6 @@
},
},
{
- .callback = init_set_sci_en_on_resume,
- .ident = "Toshiba Satellite L300",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Satellite L300"),
- },
- },
- {
- .callback = init_set_sci_en_on_resume,
- .ident = "Hewlett-Packard HP G7000 Notebook PC",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP G7000 Notebook PC"),
- },
- },
- {
- .callback = init_set_sci_en_on_resume,
- .ident = "Hewlett-Packard HP Pavilion dv3 Notebook PC",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv3 Notebook PC"),
- },
- },
- {
- .callback = init_set_sci_en_on_resume,
- .ident = "Hewlett-Packard Pavilion dv4",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4"),
- },
- },
- {
- .callback = init_set_sci_en_on_resume,
- .ident = "Hewlett-Packard Pavilion dv7",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7"),
- },
- },
- {
- .callback = init_set_sci_en_on_resume,
- .ident = "Hewlett-Packard Compaq Presario C700 Notebook PC",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Compaq Presario C700 Notebook PC"),
- },
- },
- {
- .callback = init_set_sci_en_on_resume,
- .ident = "Hewlett-Packard Compaq Presario CQ40 Notebook PC",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Compaq Presario CQ40 Notebook PC"),
- },
- },
- {
- .callback = init_set_sci_en_on_resume,
- .ident = "Lenovo ThinkPad T410",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T410"),
- },
- },
- {
- .callback = init_set_sci_en_on_resume,
- .ident = "Lenovo ThinkPad T510",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T510"),
- },
- },
- {
- .callback = init_set_sci_en_on_resume,
- .ident = "Lenovo ThinkPad W510",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad W510"),
- },
- },
- {
- .callback = init_set_sci_en_on_resume,
- .ident = "Lenovo ThinkPad X201[s]",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201"),
- },
- },
- {
.callback = init_old_suspend_ordering,
.ident = "Panasonic CF51-2L",
.matches = {
@@ -490,30 +383,6 @@
DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
},
},
- {
- .callback = init_set_sci_en_on_resume,
- .ident = "Dell Studio 1558",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1558"),
- },
- },
- {
- .callback = init_set_sci_en_on_resume,
- .ident = "Dell Studio 1557",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1557"),
- },
- },
- {
- .callback = init_set_sci_en_on_resume,
- .ident = "Dell Studio 1555",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1555"),
- },
- },
{},
};
#endif /* CONFIG_SUSPEND */
@@ -546,7 +415,7 @@
{
int error;
- error = s4_no_nvs ? 0 : hibernate_nvs_alloc();
+ error = s4_no_nvs ? 0 : suspend_nvs_alloc();
if (!error) {
acpi_target_sleep_state = ACPI_STATE_S4;
acpi_sleep_tts_switch(acpi_target_sleep_state);
@@ -560,7 +429,7 @@
int error = acpi_pm_prepare();
if (!error)
- hibernate_nvs_save();
+ suspend_nvs_save();
return error;
}
@@ -583,12 +452,6 @@
return ACPI_SUCCESS(status) ? 0 : -EFAULT;
}
-static void acpi_hibernation_finish(void)
-{
- hibernate_nvs_free();
- acpi_pm_finish();
-}
-
static void acpi_hibernation_leave(void)
{
/*
@@ -605,20 +468,14 @@
panic("ACPI S4 hardware signature mismatch");
}
/* Restore the NVS memory area */
- hibernate_nvs_restore();
+ suspend_nvs_restore();
+ /* Allow EC transactions to happen. */
+ acpi_ec_unblock_transactions_early();
}
-static int acpi_pm_pre_restore(void)
+static void acpi_pm_thaw(void)
{
- acpi_disable_all_gpes();
- acpi_os_wait_events_complete(NULL);
- acpi_ec_suspend_transactions();
- return 0;
-}
-
-static void acpi_pm_restore_cleanup(void)
-{
- acpi_ec_resume_transactions();
+ acpi_ec_unblock_transactions();
acpi_enable_all_runtime_gpes();
}
@@ -626,12 +483,12 @@
.begin = acpi_hibernation_begin,
.end = acpi_pm_end,
.pre_snapshot = acpi_hibernation_pre_snapshot,
- .finish = acpi_hibernation_finish,
+ .finish = acpi_pm_finish,
.prepare = acpi_pm_prepare,
.enter = acpi_hibernation_enter,
.leave = acpi_hibernation_leave,
- .pre_restore = acpi_pm_pre_restore,
- .restore_cleanup = acpi_pm_restore_cleanup,
+ .pre_restore = acpi_pm_freeze,
+ .restore_cleanup = acpi_pm_thaw,
};
/**
@@ -654,7 +511,7 @@
if (!error) {
if (!s4_no_nvs)
- error = hibernate_nvs_alloc();
+ error = suspend_nvs_alloc();
if (!error)
acpi_target_sleep_state = ACPI_STATE_S4;
}
@@ -663,12 +520,9 @@
static int acpi_hibernation_pre_snapshot_old(void)
{
- int error = acpi_pm_disable_gpes();
-
- if (!error)
- hibernate_nvs_save();
-
- return error;
+ acpi_pm_freeze();
+ suspend_nvs_save();
+ return 0;
}
/*
@@ -679,12 +533,12 @@
.begin = acpi_hibernation_begin_old,
.end = acpi_pm_end,
.pre_snapshot = acpi_hibernation_pre_snapshot_old,
- .finish = acpi_hibernation_finish,
- .prepare = acpi_pm_disable_gpes,
+ .prepare = acpi_pm_freeze,
+ .finish = acpi_pm_finish,
.enter = acpi_hibernation_enter,
.leave = acpi_hibernation_leave,
- .pre_restore = acpi_pm_pre_restore,
- .restore_cleanup = acpi_pm_restore_cleanup,
+ .pre_restore = acpi_pm_freeze,
+ .restore_cleanup = acpi_pm_thaw,
.recover = acpi_pm_finish,
};
#endif /* CONFIG_HIBERNATION */
diff --git a/drivers/acpi/sleep.h b/drivers/acpi/sleep.h
index 8a8f3b3..25b8bd1 100644
--- a/drivers/acpi/sleep.h
+++ b/drivers/acpi/sleep.h
@@ -1,6 +1,6 @@
extern u8 sleep_states[];
-extern int acpi_suspend (u32 state);
+extern int acpi_suspend(u32 state);
extern void acpi_enable_wakeup_device_prep(u8 sleep_state);
extern void acpi_enable_wakeup_device(u8 sleep_state);
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index c79e789..f8db50a 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -388,10 +388,12 @@
if (index < num_gpes) {
if (!strcmp(buf, "disable\n") &&
(status & ACPI_EVENT_FLAG_ENABLED))
- result = acpi_set_gpe(handle, index, ACPI_GPE_DISABLE);
+ result = acpi_disable_gpe(handle, index,
+ ACPI_GPE_TYPE_RUNTIME);
else if (!strcmp(buf, "enable\n") &&
!(status & ACPI_EVENT_FLAG_ENABLED))
- result = acpi_set_gpe(handle, index, ACPI_GPE_ENABLE);
+ result = acpi_enable_gpe(handle, index,
+ ACPI_GPE_TYPE_RUNTIME);
else if (!strcmp(buf, "clear\n") &&
(status & ACPI_EVENT_FLAG_SET))
result = acpi_clear_gpe(handle, index);
diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
index 8a0ed28..f336bca7 100644
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -213,7 +213,7 @@
unsigned long table_end;
acpi_size tbl_size;
- if (acpi_disabled && !acpi_ht)
+ if (acpi_disabled)
return -ENODEV;
if (!handler)
@@ -280,7 +280,7 @@
struct acpi_table_header *table = NULL;
acpi_size tbl_size;
- if (acpi_disabled && !acpi_ht)
+ if (acpi_disabled)
return -ENODEV;
if (!handler)
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index a0c93b3..9865d46 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -45,6 +45,7 @@
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#include <linux/suspend.h>
+#include <acpi/video.h>
#define PREFIX "ACPI: "
@@ -65,11 +66,6 @@
#define MAX_NAME_LEN 20
-#define ACPI_VIDEO_DISPLAY_CRT 1
-#define ACPI_VIDEO_DISPLAY_TV 2
-#define ACPI_VIDEO_DISPLAY_DVI 3
-#define ACPI_VIDEO_DISPLAY_LCD 4
-
#define _COMPONENT ACPI_VIDEO_COMPONENT
ACPI_MODULE_NAME("video");
@@ -1007,11 +1003,11 @@
result = acpi_video_init_brightness(device);
if (result)
return;
- name = kzalloc(MAX_NAME_LEN, GFP_KERNEL);
+ name = kasprintf(GFP_KERNEL, "acpi_video%d", count);
if (!name)
return;
+ count++;
- sprintf(name, "acpi_video%d", count++);
memset(&props, 0, sizeof(struct backlight_properties));
props.max_brightness = device->brightness->count - 3;
device->backlight = backlight_device_register(name, NULL, device,
@@ -1067,10 +1063,10 @@
if (device->cap._DCS && device->cap._DSS) {
static int count;
char *name;
- name = kzalloc(MAX_NAME_LEN, GFP_KERNEL);
+ name = kasprintf(GFP_KERNEL, "acpi_video%d", count);
if (!name)
return;
- sprintf(name, "acpi_video%d", count++);
+ count++;
device->output_dev = video_output_register(name,
NULL, device, &acpi_output_properties);
kfree(name);
@@ -1748,11 +1744,27 @@
}
static int
+acpi_video_get_device_type(struct acpi_video_bus *video,
+ unsigned long device_id)
+{
+ struct acpi_video_enumerated_device *ids;
+ int i;
+
+ for (i = 0; i < video->attached_count; i++) {
+ ids = &video->attached_array[i];
+ if ((ids->value.int_val & 0xffff) == device_id)
+ return ids->value.int_val;
+ }
+
+ return 0;
+}
+
+static int
acpi_video_bus_get_one_device(struct acpi_device *device,
struct acpi_video_bus *video)
{
unsigned long long device_id;
- int status;
+ int status, device_type;
struct acpi_video_device *data;
struct acpi_video_device_attrib* attribute;
@@ -1797,8 +1809,25 @@
}
if(attribute->bios_can_detect)
data->flags.bios = 1;
- } else
- data->flags.unknown = 1;
+ } else {
+ /* Check for legacy IDs */
+ device_type = acpi_video_get_device_type(video,
+ device_id);
+ /* Ignore bits 16 and 18-20 */
+ switch (device_type & 0xffe2ffff) {
+ case ACPI_VIDEO_DISPLAY_LEGACY_MONITOR:
+ data->flags.crt = 1;
+ break;
+ case ACPI_VIDEO_DISPLAY_LEGACY_PANEL:
+ data->flags.lcd = 1;
+ break;
+ case ACPI_VIDEO_DISPLAY_LEGACY_TV:
+ data->flags.tvout = 1;
+ break;
+ default:
+ data->flags.unknown = 1;
+ }
+ }
acpi_video_device_bind(video, data);
acpi_video_device_find_cap(data);
@@ -2032,6 +2061,71 @@
return result;
}
+int acpi_video_get_edid(struct acpi_device *device, int type, int device_id,
+ void **edid)
+{
+ struct acpi_video_bus *video;
+ struct acpi_video_device *video_device;
+ union acpi_object *buffer = NULL;
+ acpi_status status;
+ int i, length;
+
+ if (!device || !acpi_driver_data(device))
+ return -EINVAL;
+
+ video = acpi_driver_data(device);
+
+ for (i = 0; i < video->attached_count; i++) {
+ video_device = video->attached_array[i].bind_info;
+ length = 256;
+
+ if (!video_device)
+ continue;
+
+ if (type) {
+ switch (type) {
+ case ACPI_VIDEO_DISPLAY_CRT:
+ if (!video_device->flags.crt)
+ continue;
+ break;
+ case ACPI_VIDEO_DISPLAY_TV:
+ if (!video_device->flags.tvout)
+ continue;
+ break;
+ case ACPI_VIDEO_DISPLAY_DVI:
+ if (!video_device->flags.dvi)
+ continue;
+ break;
+ case ACPI_VIDEO_DISPLAY_LCD:
+ if (!video_device->flags.lcd)
+ continue;
+ break;
+ }
+ } else if (video_device->device_id != device_id) {
+ continue;
+ }
+
+ status = acpi_video_device_EDID(video_device, &buffer, length);
+
+ if (ACPI_FAILURE(status) || !buffer ||
+ buffer->type != ACPI_TYPE_BUFFER) {
+ length = 128;
+ status = acpi_video_device_EDID(video_device, &buffer,
+ length);
+ if (ACPI_FAILURE(status) || !buffer ||
+ buffer->type != ACPI_TYPE_BUFFER) {
+ continue;
+ }
+ }
+
+ *edid = buffer->buffer.pointer;
+ return length;
+ }
+
+ return -ENODEV;
+}
+EXPORT_SYMBOL(acpi_video_get_edid);
+
static int
acpi_video_bus_get_devices(struct acpi_video_bus *video,
struct acpi_device *device)
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index fc2f26b..c5fef01 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -250,7 +250,7 @@
ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR;
if (!strcmp("video", str))
acpi_video_support |=
- ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO;
+ ACPI_VIDEO_BACKLIGHT_FORCE_VIDEO;
}
return 1;
}
diff --git a/drivers/acpi/wakeup.c b/drivers/acpi/wakeup.c
index 4b9d339..388747a 100644
--- a/drivers/acpi/wakeup.c
+++ b/drivers/acpi/wakeup.c
@@ -64,16 +64,13 @@
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
- if (!dev->wakeup.flags.valid)
- continue;
-
- if ((!dev->wakeup.state.enabled && !dev->wakeup.prepare_count)
+ if (!dev->wakeup.flags.valid || !dev->wakeup.state.enabled
|| sleep_state > (u32) dev->wakeup.sleep_state)
continue;
/* The wake-up power should have been enabled already. */
- acpi_set_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
- ACPI_GPE_ENABLE);
+ acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
+ ACPI_GPE_TYPE_WAKE);
}
}
@@ -96,6 +93,8 @@
|| (sleep_state > (u32) dev->wakeup.sleep_state))
continue;
+ acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
+ ACPI_GPE_TYPE_WAKE);
acpi_disable_wakeup_device_power(dev);
}
}
@@ -109,13 +108,8 @@
struct acpi_device *dev = container_of(node,
struct acpi_device,
wakeup_list);
- /* In case user doesn't load button driver */
- if (!dev->wakeup.flags.always_enabled ||
- dev->wakeup.state.enabled)
- continue;
- acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
- ACPI_GPE_TYPE_WAKE);
- dev->wakeup.state.enabled = 1;
+ if (dev->wakeup.flags.always_enabled)
+ dev->wakeup.state.enabled = 1;
}
mutex_unlock(&acpi_device_lock);
return 0;
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index e68541f..aa85a98 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -57,6 +57,8 @@
This option adds support for SATA Port Multipliers
(the SATA version of an ethernet hub, or SAS expander).
+comment "Controllers with non-SFF native interface"
+
config SATA_AHCI
tristate "AHCI SATA support"
depends on PCI
@@ -73,11 +75,12 @@
If unsure, say N.
-config SATA_SIL24
- tristate "Silicon Image 3124/3132 SATA support"
- depends on PCI
+config SATA_FSL
+ tristate "Freescale 3.0Gbps SATA support"
+ depends on FSL_SOC
help
- This option enables support for Silicon Image 3124/3132 Serial ATA.
+ This option enables support for Freescale 3.0Gbps SATA controller.
+ It can be found on MPC837x and MPC8315.
If unsure, say N.
@@ -87,12 +90,11 @@
help
This option enables support for Initio 162x Serial ATA.
-config SATA_FSL
- tristate "Freescale 3.0Gbps SATA support"
- depends on FSL_SOC
+config SATA_SIL24
+ tristate "Silicon Image 3124/3132 SATA support"
+ depends on PCI
help
- This option enables support for Freescale 3.0Gbps SATA controller.
- It can be found on MPC837x and MPC8315.
+ This option enables support for Silicon Image 3124/3132 Serial ATA.
If unsure, say N.
@@ -116,15 +118,65 @@
if ATA_SFF
-config SATA_SVW
- tristate "ServerWorks Frodo / Apple K2 SATA support"
+comment "SFF controllers with custom DMA interface"
+
+config PDC_ADMA
+ tristate "Pacific Digital ADMA support"
depends on PCI
help
- This option enables support for Broadcom/Serverworks/Apple K2
- SATA support.
+ This option enables support for Pacific Digital ADMA controllers
If unsure, say N.
+config PATA_MPC52xx
+ tristate "Freescale MPC52xx SoC internal IDE"
+ depends on PPC_MPC52xx && PPC_BESTCOMM
+ select PPC_BESTCOMM_ATA
+ help
+ This option enables support for integrated IDE controller
+ of the Freescale MPC52xx SoC.
+
+ If unsure, say N.
+
+config PATA_OCTEON_CF
+ tristate "OCTEON Boot Bus Compact Flash support"
+ depends on CPU_CAVIUM_OCTEON
+ help
+ This option enables a polled compact flash driver for use with
+ compact flash cards attached to the OCTEON boot bus.
+
+ If unsure, say N.
+
+config SATA_QSTOR
+ tristate "Pacific Digital SATA QStor support"
+ depends on PCI
+ help
+ This option enables support for Pacific Digital Serial ATA QStor.
+
+ If unsure, say N.
+
+config SATA_SX4
+ tristate "Promise SATA SX4 support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for Promise Serial ATA SX4.
+
+ If unsure, say N.
+
+config ATA_BMDMA
+ bool "ATA BMDMA support"
+ default y
+ help
+ This option adds support for SFF ATA controllers with BMDMA
+ capability. BMDMA stands for bus-master DMA and is the
+ de facto DMA interface for SFF controllers.
+
+ If unsure, say Y.
+
+if ATA_BMDMA
+
+comment "SATA SFF controllers with BMDMA"
+
config ATA_PIIX
tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
depends on PCI
@@ -152,22 +204,6 @@
If unsure, say N.
-config PDC_ADMA
- tristate "Pacific Digital ADMA support"
- depends on PCI
- help
- This option enables support for Pacific Digital ADMA controllers
-
- If unsure, say N.
-
-config SATA_QSTOR
- tristate "Pacific Digital SATA QStor support"
- depends on PCI
- help
- This option enables support for Pacific Digital Serial ATA QStor.
-
- If unsure, say N.
-
config SATA_PROMISE
tristate "Promise SATA TX2/TX4 support"
depends on PCI
@@ -176,14 +212,6 @@
If unsure, say N.
-config SATA_SX4
- tristate "Promise SATA SX4 support (Experimental)"
- depends on PCI && EXPERIMENTAL
- help
- This option enables support for Promise Serial ATA SX4.
-
- If unsure, say N.
-
config SATA_SIL
tristate "Silicon Image SATA support"
depends on PCI
@@ -203,6 +231,15 @@
enable the PATA_SIS driver in the config.
If unsure, say N.
+config SATA_SVW
+ tristate "ServerWorks Frodo / Apple K2 SATA support"
+ depends on PCI
+ help
+ This option enables support for Broadcom/Serverworks/Apple K2
+ SATA support.
+
+ If unsure, say N.
+
config SATA_ULI
tristate "ULi Electronics SATA support"
depends on PCI
@@ -227,14 +264,7 @@
If unsure, say N.
-config PATA_ACPI
- tristate "ACPI firmware driver for PATA"
- depends on ATA_ACPI
- help
- This option enables an ACPI method driver which drives
- motherboard PATA controller interfaces through the ACPI
- firmware in the BIOS. This driver can sometimes handle
- otherwise unsupported hardware.
+comment "PATA SFF controllers with BMDMA"
config PATA_ALI
tristate "ALi PATA support"
@@ -262,24 +292,6 @@
If unsure, say N.
-config PATA_ATP867X
- tristate "ARTOP/Acard ATP867X PATA support"
- depends on PCI
- help
- This option enables support for ARTOP/Acard ATP867X PATA
- controllers.
-
- If unsure, say N.
-
-config PATA_AT32
- tristate "Atmel AVR32 PATA support (Experimental)"
- depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
- help
- This option enables support for the IDE devices on the
- Atmel AT32AP platform.
-
- If unsure, say N.
-
config PATA_ATIIXP
tristate "ATI PATA support"
depends on PCI
@@ -289,13 +301,21 @@
If unsure, say N.
-config PATA_CMD640_PCI
- tristate "CMD640 PCI PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+config PATA_ATP867X
+ tristate "ARTOP/Acard ATP867X PATA support"
+ depends on PCI
help
- This option enables support for the CMD640 PCI IDE
- interface chip. Only the primary channel is currently
- supported.
+ This option enables support for ARTOP/Acard ATP867X PATA
+ controllers.
+
+ If unsure, say N.
+
+config PATA_BF54X
+ tristate "Blackfin 54x ATAPI support"
+ depends on BF542 || BF548 || BF549
+ help
+ This option enables support for the built-in ATAPI controller on
+ Blackfin 54x family chips.
If unsure, say N.
@@ -362,15 +382,6 @@
If unsure, say N.
-config ATA_GENERIC
- tristate "Generic ATA support"
- depends on PCI
- help
- This option enables support for generic BIOS configured
- ATA controllers via the new ATA layer
-
- If unsure, say N.
-
config PATA_HPT366
tristate "HPT 366/368 PATA support"
depends on PCI
@@ -415,12 +426,20 @@
controllers. Enable with care as there are still some
problems with DMA on this chipset.
-config PATA_ISAPNP
- tristate "ISA Plug and Play PATA support"
- depends on ISAPNP
+config PATA_ICSIDE
+ tristate "Acorn ICS PATA support"
+ depends on ARM && ARCH_ACORN
help
- This option enables support for ISA plug & play ATA
- controllers such as those found on old soundcards.
+ On Acorn systems, say Y here if you wish to use the ICS PATA
+ interface card. This is not required for ICS partition support.
+ If you are unsure, say N to this.
+
+config PATA_IT8213
+ tristate "IT8213 PATA support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the ITE 821 PATA
+ controllers via the new ATA layer.
If unsure, say N.
@@ -434,15 +453,6 @@
If unsure, say N.
-config PATA_IT8213
- tristate "IT8213 PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
- help
- This option enables support for the ITE 821 PATA
- controllers via the new ATA layer.
-
- If unsure, say N.
-
config PATA_JMICRON
tristate "JMicron PATA support"
depends on PCI
@@ -452,23 +462,14 @@
If unsure, say N.
-config PATA_LEGACY
- tristate "Legacy ISA PATA support (Experimental)"
- depends on (ISA || PCI) && EXPERIMENTAL
+config PATA_MACIO
+ tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
+ depends on PPC_PMAC
help
- This option enables support for ISA/VLB/PCI bus legacy PATA
- ports and allows them to be accessed via the new ATA layer.
-
- If unsure, say N.
-
-config PATA_TRIFLEX
- tristate "Compaq Triflex PATA support"
- depends on PCI
- help
- Enable support for the Compaq 'Triflex' IDE controller as found
- on many Compaq Pentium-Pro systems, via the new ATA layer.
-
- If unsure, say N.
+ Most IDE capable PowerMacs have IDE busses driven by a variant
+ of this controller which is part of the Apple chipset used on
+ most PowerMac models. Some models have multiple busses using
+ different chipsets, though generally, MacIO is one of them.
config PATA_MARVELL
tristate "Marvell PATA support via legacy mode"
@@ -481,32 +482,6 @@
If unsure, say N.
-config PATA_MPC52xx
- tristate "Freescale MPC52xx SoC internal IDE"
- depends on PPC_MPC52xx && PPC_BESTCOMM
- select PPC_BESTCOMM_ATA
- help
- This option enables support for integrated IDE controller
- of the Freescale MPC52xx SoC.
-
- If unsure, say N.
-
-config PATA_MPIIX
- tristate "Intel PATA MPIIX support"
- depends on PCI
- help
- This option enables support for MPIIX PATA support.
-
- If unsure, say N.
-
-config PATA_OLDPIIX
- tristate "Intel PATA old PIIX support"
- depends on PCI
- help
- This option enables support for early PIIX PATA support.
-
- If unsure, say N.
-
config PATA_NETCELL
tristate "NETCELL Revolution RAID support"
depends on PCI
@@ -525,15 +500,6 @@
If unsure, say N.
-config PATA_NS87410
- tristate "Nat Semi NS87410 PATA support"
- depends on PCI
- help
- This option enables support for the National Semiconductor
- NS87410 PCI-IDE controller.
-
- If unsure, say N.
-
config PATA_NS87415
tristate "Nat Semi NS87415 PATA support"
depends on PCI
@@ -543,12 +509,11 @@
If unsure, say N.
-config PATA_OPTI
- tristate "OPTI621/6215 PATA support (Very Experimental)"
- depends on PCI && EXPERIMENTAL
+config PATA_OLDPIIX
+ tristate "Intel PATA old PIIX support"
+ depends on PCI
help
- This option enables full PIO support for the early Opti ATA
- controllers found on some old motherboards.
+ This option enables support for early PIIX PATA support.
If unsure, say N.
@@ -562,24 +527,6 @@
If unsure, say N.
-config PATA_PALMLD
- tristate "Palm LifeDrive PATA support"
- depends on MACH_PALMLD
- help
- This option enables support for Palm LifeDrive's internal ATA
- port via the new ATA layer.
-
- If unsure, say N.
-
-config PATA_PCMCIA
- tristate "PCMCIA PATA support"
- depends on PCMCIA
- help
- This option enables support for PCMCIA ATA interfaces, including
- compact flash card adapters via the new ATA layer.
-
- If unsure, say N.
-
config PATA_PDC2027X
tristate "Promise PATA 2027x support"
depends on PCI
@@ -597,12 +544,6 @@
If unsure, say N.
-config PATA_QDI
- tristate "QDI VLB PATA support"
- depends on ISA
- help
- Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
-
config PATA_RADISYS
tristate "RADISYS 82600 PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
@@ -612,15 +553,6 @@
If unsure, say N.
-config PATA_RB532
- tristate "RouterBoard 532 PATA CompactFlash support"
- depends on MIKROTIK_RB532
- help
- This option enables support for the RouterBoard 532
- PATA CompactFlash controller.
-
- If unsure, say N.
-
config PATA_RDC
tristate "RDC PATA support"
depends on PCI
@@ -631,15 +563,6 @@
If unsure, say N.
-config PATA_RZ1000
- tristate "PC Tech RZ1000 PATA support"
- depends on PCI
- help
- This option enables basic support for the PC Tech RZ1000/1
- PATA controllers via the new ATA layer
-
- If unsure, say N.
-
config PATA_SC1200
tristate "SC1200 PATA support"
depends on PCI
@@ -649,6 +572,24 @@
If unsure, say N.
+config PATA_SCC
+ tristate "Toshiba's Cell Reference Set IDE support"
+ depends on PCI && PPC_CELLEB
+ help
+ This option enables support for the built-in IDE controller on
+ Toshiba Cell Reference Board.
+
+ If unsure, say N.
+
+config PATA_SCH
+ tristate "Intel SCH PATA support"
+ depends on PCI
+ help
+ This option enables support for Intel SCH PATA on the Intel
+ SCH (US15W, US15L, UL11L) series host controllers.
+
+ If unsure, say N.
+
config PATA_SERVERWORKS
tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
depends on PCI
@@ -683,6 +624,15 @@
If unsure, say N.
+config PATA_TRIFLEX
+ tristate "Compaq Triflex PATA support"
+ depends on PCI
+ help
+ Enable support for the Compaq 'Triflex' IDE controller as found
+ on many Compaq Pentium-Pro systems, via the new ATA layer.
+
+ If unsure, say N.
+
config PATA_VIA
tristate "VIA PATA support"
depends on PCI
@@ -701,12 +651,99 @@
If unsure, say N.
-config PATA_WINBOND_VLB
- tristate "Winbond W83759A VLB PATA support (Experimental)"
- depends on ISA && EXPERIMENTAL
+endif # ATA_BMDMA
+
+comment "PIO-only SFF controllers"
+
+config PATA_AT32
+ tristate "Atmel AVR32 PATA support (Experimental)"
+ depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
help
- Support for the Winbond W83759A controller on Vesa Local Bus
- systems.
+ This option enables support for the IDE devices on the
+ Atmel AT32AP platform.
+
+ If unsure, say N.
+
+config PATA_AT91
+ tristate "PATA support for AT91SAM9260"
+ depends on ARM && ARCH_AT91
+ help
+ This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
+
+ If unsure, say N.
+
+config PATA_CMD640_PCI
+ tristate "CMD640 PCI PATA support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the CMD640 PCI IDE
+ interface chip. Only the primary channel is currently
+ supported.
+
+ If unsure, say N.
+
+config PATA_ISAPNP
+ tristate "ISA Plug and Play PATA support"
+ depends on ISAPNP
+ help
+ This option enables support for ISA plug & play ATA
+ controllers such as those found on old soundcards.
+
+ If unsure, say N.
+
+config PATA_IXP4XX_CF
+ tristate "IXP4XX Compact Flash support"
+ depends on ARCH_IXP4XX
+ help
+ This option enables support for a Compact Flash connected on
+ the ixp4xx expansion bus. This driver had been written for
+ Loft/Avila boards in mind but can work with others.
+
+ If unsure, say N.
+
+config PATA_MPIIX
+ tristate "Intel PATA MPIIX support"
+ depends on PCI
+ help
+ This option enables support for MPIIX PATA support.
+
+ If unsure, say N.
+
+config PATA_NS87410
+ tristate "Nat Semi NS87410 PATA support"
+ depends on PCI
+ help
+ This option enables support for the National Semiconductor
+ NS87410 PCI-IDE controller.
+
+ If unsure, say N.
+
+config PATA_OPTI
+ tristate "OPTI621/6215 PATA support (Very Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables full PIO support for the early Opti ATA
+ controllers found on some old motherboards.
+
+ If unsure, say N.
+
+config PATA_PALMLD
+ tristate "Palm LifeDrive PATA support"
+ depends on MACH_PALMLD
+ help
+ This option enables support for Palm LifeDrive's internal ATA
+ port via the new ATA layer.
+
+ If unsure, say N.
+
+config PATA_PCMCIA
+ tristate "PCMCIA PATA support"
+ depends on PCMCIA
+ help
+ This option enables support for PCMCIA ATA interfaces, including
+ compact flash card adapters via the new ATA layer.
+
+ If unsure, say N.
config HAVE_PATA_PLATFORM
bool
@@ -725,14 +762,6 @@
If unsure, say N.
-config PATA_AT91
- tristate "PATA support for AT91SAM9260"
- depends on ARM && ARCH_AT91
- help
- This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
-
- If unsure, say N.
-
config PATA_OF_PLATFORM
tristate "OpenFirmware platform device PATA support"
depends on PATA_PLATFORM && PPC_OF
@@ -743,69 +772,65 @@
If unsure, say N.
-config PATA_ICSIDE
- tristate "Acorn ICS PATA support"
- depends on ARM && ARCH_ACORN
+config PATA_QDI
+ tristate "QDI VLB PATA support"
+ depends on ISA
help
- On Acorn systems, say Y here if you wish to use the ICS PATA
- interface card. This is not required for ICS partition support.
- If you are unsure, say N to this.
+ Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
-config PATA_IXP4XX_CF
- tristate "IXP4XX Compact Flash support"
- depends on ARCH_IXP4XX
+config PATA_RB532
+ tristate "RouterBoard 532 PATA CompactFlash support"
+ depends on MIKROTIK_RB532
help
- This option enables support for a Compact Flash connected on
- the ixp4xx expansion bus. This driver had been written for
- Loft/Avila boards in mind but can work with others.
+ This option enables support for the RouterBoard 532
+ PATA CompactFlash controller.
If unsure, say N.
-config PATA_OCTEON_CF
- tristate "OCTEON Boot Bus Compact Flash support"
- depends on CPU_CAVIUM_OCTEON
- help
- This option enables a polled compact flash driver for use with
- compact flash cards attached to the OCTEON boot bus.
-
- If unsure, say N.
-
-config PATA_SCC
- tristate "Toshiba's Cell Reference Set IDE support"
- depends on PCI && PPC_CELLEB
- help
- This option enables support for the built-in IDE controller on
- Toshiba Cell Reference Board.
-
- If unsure, say N.
-
-config PATA_SCH
- tristate "Intel SCH PATA support"
+config PATA_RZ1000
+ tristate "PC Tech RZ1000 PATA support"
depends on PCI
help
- This option enables support for Intel SCH PATA on the Intel
- SCH (US15W, US15L, UL11L) series host controllers.
+ This option enables basic support for the PC Tech RZ1000/1
+ PATA controllers via the new ATA layer
If unsure, say N.
-config PATA_BF54X
- tristate "Blackfin 54x ATAPI support"
- depends on BF542 || BF548 || BF549
+config PATA_WINBOND_VLB
+ tristate "Winbond W83759A VLB PATA support (Experimental)"
+ depends on ISA && EXPERIMENTAL
help
- This option enables support for the built-in ATAPI controller on
- Blackfin 54x family chips.
+ Support for the Winbond W83759A controller on Vesa Local Bus
+ systems.
+
+comment "Generic fallback / legacy drivers"
+
+config PATA_ACPI
+ tristate "ACPI firmware driver for PATA"
+ depends on ATA_ACPI && ATA_BMDMA
+ help
+ This option enables an ACPI method driver which drives
+ motherboard PATA controller interfaces through the ACPI
+ firmware in the BIOS. This driver can sometimes handle
+ otherwise unsupported hardware.
+
+config ATA_GENERIC
+ tristate "Generic ATA support"
+ depends on PCI && ATA_BMDMA
+ help
+ This option enables support for generic BIOS configured
+ ATA controllers via the new ATA layer
If unsure, say N.
-config PATA_MACIO
- tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
- depends on PPC_PMAC
+config PATA_LEGACY
+ tristate "Legacy ISA PATA support (Experimental)"
+ depends on (ISA || PCI) && EXPERIMENTAL
help
- Most IDE capable PowerMacs have IDE busses driven by a variant
- of this controller which is part of the Apple chipset used on
- most PowerMac models. Some models have multiple busses using
- different chipsets, though generally, MacIO is one of them.
+ This option enables support for ISA/VLB/PCI bus legacy PATA
+ ports and allows them to be accessed via the new ATA layer.
+ If unsure, say N.
endif # ATA_SFF
endif # ATA
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index d0a93c4..7ef89d7 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -1,33 +1,39 @@
obj-$(CONFIG_ATA) += libata.o
+# non-SFF interface
obj-$(CONFIG_SATA_AHCI) += ahci.o libahci.o
obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o
-obj-$(CONFIG_SATA_SVW) += sata_svw.o
-obj-$(CONFIG_ATA_PIIX) += ata_piix.o
-obj-$(CONFIG_SATA_PROMISE) += sata_promise.o
-obj-$(CONFIG_SATA_QSTOR) += sata_qstor.o
-obj-$(CONFIG_SATA_SIL) += sata_sil.o
+obj-$(CONFIG_SATA_FSL) += sata_fsl.o
+obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
+
+# SFF w/ custom DMA
+obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
+obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o
+obj-$(CONFIG_PATA_OCTEON_CF) += pata_octeon_cf.o
+obj-$(CONFIG_SATA_QSTOR) += sata_qstor.o
+obj-$(CONFIG_SATA_SX4) += sata_sx4.o
+
+# SFF SATA w/ BMDMA
+obj-$(CONFIG_ATA_PIIX) += ata_piix.o
+obj-$(CONFIG_SATA_MV) += sata_mv.o
+obj-$(CONFIG_SATA_NV) += sata_nv.o
+obj-$(CONFIG_SATA_PROMISE) += sata_promise.o
+obj-$(CONFIG_SATA_SIL) += sata_sil.o
+obj-$(CONFIG_SATA_SIS) += sata_sis.o
+obj-$(CONFIG_SATA_SVW) += sata_svw.o
+obj-$(CONFIG_SATA_ULI) += sata_uli.o
obj-$(CONFIG_SATA_VIA) += sata_via.o
obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o
-obj-$(CONFIG_SATA_SIS) += sata_sis.o
-obj-$(CONFIG_SATA_SX4) += sata_sx4.o
-obj-$(CONFIG_SATA_NV) += sata_nv.o
-obj-$(CONFIG_SATA_ULI) += sata_uli.o
-obj-$(CONFIG_SATA_MV) += sata_mv.o
-obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
-obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
-obj-$(CONFIG_SATA_FSL) += sata_fsl.o
-obj-$(CONFIG_PATA_MACIO) += pata_macio.o
+# SFF PATA w/ BMDMA
obj-$(CONFIG_PATA_ALI) += pata_ali.o
obj-$(CONFIG_PATA_AMD) += pata_amd.o
obj-$(CONFIG_PATA_ARTOP) += pata_artop.o
-obj-$(CONFIG_PATA_ATP867X) += pata_atp867x.o
-obj-$(CONFIG_PATA_AT32) += pata_at32.o
obj-$(CONFIG_PATA_ATIIXP) += pata_atiixp.o
-obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o
+obj-$(CONFIG_PATA_ATP867X) += pata_atp867x.o
+obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o
obj-$(CONFIG_PATA_CMD64X) += pata_cmd64x.o
obj-$(CONFIG_PATA_CS5520) += pata_cs5520.o
obj-$(CONFIG_PATA_CS5530) += pata_cs5530.o
@@ -39,47 +45,50 @@
obj-$(CONFIG_PATA_HPT37X) += pata_hpt37x.o
obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o
obj-$(CONFIG_PATA_HPT3X3) += pata_hpt3x3.o
-obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o
-obj-$(CONFIG_PATA_IT821X) += pata_it821x.o
+obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
obj-$(CONFIG_PATA_IT8213) += pata_it8213.o
+obj-$(CONFIG_PATA_IT821X) += pata_it821x.o
obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o
+obj-$(CONFIG_PATA_MACIO) += pata_macio.o
+obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o
obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o
obj-$(CONFIG_PATA_NINJA32) += pata_ninja32.o
-obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o
obj-$(CONFIG_PATA_NS87415) += pata_ns87415.o
-obj-$(CONFIG_PATA_OPTI) += pata_opti.o
-obj-$(CONFIG_PATA_OPTIDMA) += pata_optidma.o
-obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o
-obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o
-obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o
obj-$(CONFIG_PATA_OLDPIIX) += pata_oldpiix.o
-obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o
-obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o
+obj-$(CONFIG_PATA_OPTIDMA) += pata_optidma.o
obj-$(CONFIG_PATA_PDC2027X) += pata_pdc2027x.o
obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o
-obj-$(CONFIG_PATA_QDI) += pata_qdi.o
obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o
-obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
obj-$(CONFIG_PATA_RDC) += pata_rdc.o
-obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o
-obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o
-obj-$(CONFIG_PATA_SIL680) += pata_sil680.o
-obj-$(CONFIG_PATA_TOSHIBA) += pata_piccolo.o
-obj-$(CONFIG_PATA_VIA) += pata_via.o
-obj-$(CONFIG_PATA_WINBOND) += pata_sl82c105.o
-obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o
-obj-$(CONFIG_PATA_SIS) += pata_sis.o
-obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o
-obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o
obj-$(CONFIG_PATA_SCC) += pata_scc.o
obj-$(CONFIG_PATA_SCH) += pata_sch.o
-obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o
-obj-$(CONFIG_PATA_OCTEON_CF) += pata_octeon_cf.o
+obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o
+obj-$(CONFIG_PATA_SIL680) += pata_sil680.o
+obj-$(CONFIG_PATA_SIS) += pata_sis.o
+obj-$(CONFIG_PATA_TOSHIBA) += pata_piccolo.o
+obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o
+obj-$(CONFIG_PATA_VIA) += pata_via.o
+obj-$(CONFIG_PATA_WINBOND) += pata_sl82c105.o
+
+# SFF PIO only
+obj-$(CONFIG_PATA_AT32) += pata_at32.o
+obj-$(CONFIG_PATA_AT91) += pata_at91.o
+obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o
+obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o
+obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o
+obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o
+obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o
+obj-$(CONFIG_PATA_OPTI) += pata_opti.o
+obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o
+obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
-obj-$(CONFIG_PATA_AT91) += pata_at91.o
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
-obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
+obj-$(CONFIG_PATA_QDI) += pata_qdi.o
+obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
+obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
+obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o
+
# Should be last but two libata driver
obj-$(CONFIG_PATA_ACPI) += pata_acpi.o
# Should be last but one libata driver
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 8ca16f5..f252253 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1053,6 +1053,16 @@
if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
return -ENODEV;
+ /*
+ * For some reason, MCP89 on MacBook 7,1 doesn't work with
+ * ahci, use ata_generic instead.
+ */
+ if (pdev->vendor == PCI_VENDOR_ID_NVIDIA &&
+ pdev->device == PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA &&
+ pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE &&
+ pdev->subsystem_device == 0xcb89)
+ return -ENODEV;
+
/* Promise's PDC42819 is a SAS/SATA controller that has an AHCI mode.
* At the moment, we can only use the AHCI mode. Let the users know
* that for SAS drives they're out of luck.
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 33fb614..7107a69 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -32,6 +32,11 @@
* A generic parallel ATA driver using libata
*/
+enum {
+ ATA_GEN_CLASS_MATCH = (1 << 0),
+ ATA_GEN_FORCE_DMA = (1 << 1),
+};
+
/**
* generic_set_mode - mode setting
* @link: link to set up
@@ -46,13 +51,17 @@
static int generic_set_mode(struct ata_link *link, struct ata_device **unused)
{
struct ata_port *ap = link->ap;
+ const struct pci_device_id *id = ap->host->private_data;
int dma_enabled = 0;
struct ata_device *dev;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- /* Bits 5 and 6 indicate if DMA is active on master/slave */
- if (ap->ioaddr.bmdma_addr)
+ if (id->driver_data & ATA_GEN_FORCE_DMA) {
+ dma_enabled = 0xff;
+ } else if (ap->ioaddr.bmdma_addr) {
+ /* Bits 5 and 6 indicate if DMA is active on master/slave */
dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+ }
if (pdev->vendor == PCI_VENDOR_ID_CENATEK)
dma_enabled = 0xFF;
@@ -126,7 +135,7 @@
const struct ata_port_info *ppi[] = { &info, NULL };
/* Don't use the generic entry unless instructed to do so */
- if (id->driver_data == 1 && all_generic_ide == 0)
+ if ((id->driver_data & ATA_GEN_CLASS_MATCH) && all_generic_ide == 0)
return -ENODEV;
/* Devices that need care */
@@ -155,7 +164,7 @@
return rc;
pcim_pin_device(dev);
}
- return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &generic_sht, (void *)id, 0);
}
static struct pci_device_id ata_generic[] = {
@@ -167,7 +176,15 @@
{ PCI_DEVICE(PCI_VENDOR_ID_HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), },
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561), },
{ PCI_DEVICE(PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C558), },
- { PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), },
+ { PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE),
+ .driver_data = ATA_GEN_FORCE_DMA },
+ /*
+ * For some reason, MCP89 on MacBook 7,1 doesn't work with
+ * ahci, use ata_generic instead.
+ */
+ { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA,
+ PCI_VENDOR_ID_APPLE, 0xcb89,
+ .driver_data = ATA_GEN_FORCE_DMA },
#if !defined(CONFIG_PATA_TOSHIBA) && !defined(CONFIG_PATA_TOSHIBA_MODULE)
{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), },
{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), },
@@ -175,7 +192,8 @@
{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_5), },
#endif
/* Must come last. If you add entries adjust this table appropriately */
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1},
+ { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL),
+ .driver_data = ATA_GEN_CLASS_MATCH },
{ 0, },
};
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index ec52fc6..7409f98 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1589,7 +1589,7 @@
hpriv->map = piix_init_sata_map(pdev, port_info,
piix_map_db_table[ent->driver_data]);
- rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
host->private_data = hpriv;
@@ -1626,7 +1626,7 @@
host->flags |= ATA_HOST_PARALLEL_SCAN;
pci_set_master(pdev);
- return ata_pci_sff_activate_host(host, ata_sff_interrupt, &piix_sht);
+ return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, &piix_sht);
}
static void piix_remove_one(struct pci_dev *pdev)
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 1984a6e..81e772a 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -324,6 +324,7 @@
struct ahci_host_priv *hpriv = ap->host->private_data;
void __iomem *mmio = hpriv->mmio;
void __iomem *em_mmio = mmio + hpriv->em_loc;
+ const unsigned char *msg_buf = buf;
u32 em_ctl, msg;
unsigned long flags;
int i;
@@ -343,8 +344,8 @@
}
for (i = 0; i < size; i += 4) {
- msg = buf[i] | buf[i + 1] << 8 |
- buf[i + 2] << 16 | buf[i + 3] << 24;
+ msg = msg_buf[i] | msg_buf[i + 1] << 8 |
+ msg_buf[i + 2] << 16 | msg_buf[i + 3] << 24;
writel(msg, em_mmio + i);
}
@@ -541,29 +542,11 @@
return -EINVAL;
}
-static int ahci_is_device_present(void __iomem *port_mmio)
-{
- u8 status = readl(port_mmio + PORT_TFDATA) & 0xff;
-
- /* Make sure PxTFD.STS.BSY and PxTFD.STS.DRQ are 0 */
- if (status & (ATA_BUSY | ATA_DRQ))
- return 0;
-
- /* Make sure PxSSTS.DET is 3h */
- status = readl(port_mmio + PORT_SCR_STAT) & 0xf;
- if (status != 3)
- return 0;
- return 1;
-}
-
void ahci_start_engine(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
u32 tmp;
- if (!ahci_is_device_present(port_mmio))
- return;
-
/* start DMA */
tmp = readl(port_mmio + PORT_CMD);
tmp |= PORT_CMD_START;
@@ -1892,6 +1875,9 @@
}
sata_pmp_error_handler(ap);
+
+ if (!ata_dev_enabled(ap->link.device))
+ ahci_stop_engine(ap);
}
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c47373f..ddf8e48 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -160,6 +160,10 @@
module_param_named(allow_tpm, libata_allow_tpm, int, 0444);
MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands (0=off [default], 1=on)");
+static int atapi_an;
+module_param(atapi_an, int, 0444);
+MODULE_PARM_DESC(atapi_an, "Enable ATAPI AN media presence notification (0=0ff [default], 1=on)");
+
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Library module for ATA devices");
MODULE_LICENSE("GPL");
@@ -2122,6 +2126,14 @@
goto err_out;
}
+ if (dev->horkage & ATA_HORKAGE_DUMP_ID) {
+ ata_dev_printk(dev, KERN_DEBUG, "dumping IDENTIFY data, "
+ "class=%d may_fallback=%d tried_spinup=%d\n",
+ class, may_fallback, tried_spinup);
+ print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET,
+ 16, 2, id, ATA_ID_WORDS * sizeof(*id), true);
+ }
+
/* Falling back doesn't make sense if ID data was read
* successfully at least once.
*/
@@ -2510,7 +2522,8 @@
* to enable ATAPI AN to discern between PHY status
* changed notifications and ATAPI ANs.
*/
- if ((ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) &&
+ if (atapi_an &&
+ (ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) &&
(!sata_pmp_attached(ap) ||
sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) {
unsigned int err_mask;
@@ -4106,9 +4119,8 @@
dev->n_sectors > n_sectors && dev->n_sectors == n_native_sectors) {
ata_dev_printk(dev, KERN_WARNING,
"new n_sectors matches native, probably "
- "late HPA unlock, continuing\n");
- /* keep using the old n_sectors */
- dev->n_sectors = n_sectors;
+ "late HPA unlock, n_sectors updated\n");
+ /* use the larger n_sectors */
return 0;
}
@@ -6372,6 +6384,7 @@
{ "3.0Gbps", .spd_limit = 2 },
{ "noncq", .horkage_on = ATA_HORKAGE_NONCQ },
{ "ncq", .horkage_off = ATA_HORKAGE_NONCQ },
+ { "dump_id", .horkage_on = ATA_HORKAGE_DUMP_ID },
{ "pio0", .xfer_mask = 1 << (ATA_SHIFT_PIO + 0) },
{ "pio1", .xfer_mask = 1 << (ATA_SHIFT_PIO + 1) },
{ "pio2", .xfer_mask = 1 << (ATA_SHIFT_PIO + 2) },
@@ -6655,6 +6668,7 @@
EXPORT_SYMBOL_GPL(ata_link_next);
EXPORT_SYMBOL_GPL(ata_dev_next);
EXPORT_SYMBOL_GPL(ata_std_bios_param);
+EXPORT_SYMBOL_GPL(ata_scsi_unlock_native_capacity);
EXPORT_SYMBOL_GPL(ata_host_init);
EXPORT_SYMBOL_GPL(ata_host_alloc);
EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index cfa9dd3..a54273d 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -415,6 +415,35 @@
}
/**
+ * ata_scsi_unlock_native_capacity - unlock native capacity
+ * @sdev: SCSI device to adjust device capacity for
+ *
+ * This function is called if a partition on @sdev extends beyond
+ * the end of the device. It requests EH to unlock HPA.
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. Might sleep.
+ */
+void ata_scsi_unlock_native_capacity(struct scsi_device *sdev)
+{
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+ struct ata_device *dev;
+ unsigned long flags;
+
+ spin_lock_irqsave(ap->lock, flags);
+
+ dev = ata_scsi_find_dev(ap, sdev);
+ if (dev && dev->n_sectors < dev->n_native_sectors) {
+ dev->flags |= ATA_DFLAG_UNLOCK_HPA;
+ dev->link->eh_info.action |= ATA_EH_RESET;
+ ata_port_schedule_eh(ap);
+ }
+
+ spin_unlock_irqrestore(ap->lock, flags);
+ ata_port_wait_eh(ap);
+}
+
+/**
* ata_get_identity - Handler for HDIO_GET_IDENTITY ioctl
* @ap: target port
* @sdev: SCSI device to get identify data for
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 19ddf92..efa4a18 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -63,7 +63,6 @@
.sff_tf_read = ata_sff_tf_read,
.sff_exec_command = ata_sff_exec_command,
.sff_data_xfer = ata_sff_data_xfer,
- .sff_irq_clear = ata_sff_irq_clear,
.sff_drain_fifo = ata_sff_drain_fifo,
.lost_interrupt = ata_sff_lost_interrupt,
@@ -395,33 +394,12 @@
ata_sff_set_devctl(ap, ap->ctl);
ata_wait_idle(ap);
- ap->ops->sff_irq_clear(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
}
EXPORT_SYMBOL_GPL(ata_sff_irq_on);
/**
- * ata_sff_irq_clear - Clear PCI IDE BMDMA interrupt.
- * @ap: Port associated with this ATA transaction.
- *
- * Clear interrupt and error flags in DMA status register.
- *
- * May be used as the irq_clear() entry in ata_port_operations.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-void ata_sff_irq_clear(struct ata_port *ap)
-{
- void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
- if (!mmio)
- return;
-
- iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
-}
-EXPORT_SYMBOL_GPL(ata_sff_irq_clear);
-
-/**
* ata_sff_tf_load - send taskfile registers to host controller
* @ap: Port to which output is sent
* @tf: ATA taskfile register set
@@ -820,11 +798,15 @@
case ATAPI_PROT_NODATA:
ap->hsm_task_state = HSM_ST_LAST;
break;
+#ifdef CONFIG_ATA_BMDMA
case ATAPI_PROT_DMA:
ap->hsm_task_state = HSM_ST_LAST;
/* initiate bmdma */
ap->ops->bmdma_start(qc);
break;
+#endif /* CONFIG_ATA_BMDMA */
+ default:
+ BUG();
}
}
@@ -1491,27 +1473,27 @@
}
EXPORT_SYMBOL_GPL(ata_sff_qc_fill_rtf);
-/**
- * ata_sff_host_intr - Handle host interrupt for given (port, task)
- * @ap: Port on which interrupt arrived (possibly...)
- * @qc: Taskfile currently active in engine
- *
- * Handle host interrupt for given queued command. Currently,
- * only DMA interrupts are handled. All other commands are
- * handled via polling with interrupts disabled (nIEN bit).
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- *
- * RETURNS:
- * One if interrupt was handled, zero if not (shared irq).
- */
-unsigned int ata_sff_host_intr(struct ata_port *ap,
- struct ata_queued_cmd *qc)
+static unsigned int ata_sff_idle_irq(struct ata_port *ap)
{
- struct ata_eh_info *ehi = &ap->link.eh_info;
- u8 status, host_stat = 0;
- bool bmdma_stopped = false;
+ ap->stats.idle_irq++;
+
+#ifdef ATA_IRQ_TRAP
+ if ((ap->stats.idle_irq % 1000) == 0) {
+ ap->ops->sff_check_status(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
+ ata_port_printk(ap, KERN_WARNING, "irq trap\n");
+ return 1;
+ }
+#endif
+ return 0; /* irq not handled */
+}
+
+static unsigned int __ata_sff_port_intr(struct ata_port *ap,
+ struct ata_queued_cmd *qc,
+ bool hsmv_on_idle)
+{
+ u8 status;
VPRINTK("ata%u: protocol %d task_state %d\n",
ap->print_id, qc->tf.protocol, ap->hsm_task_state);
@@ -1528,90 +1510,56 @@
* need to check ata_is_atapi(qc->tf.protocol) again.
*/
if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
- goto idle_irq;
- break;
- case HSM_ST_LAST:
- if (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATAPI_PROT_DMA) {
- /* check status of DMA engine */
- host_stat = ap->ops->bmdma_status(ap);
- VPRINTK("ata%u: host_stat 0x%X\n",
- ap->print_id, host_stat);
-
- /* if it's not our irq... */
- if (!(host_stat & ATA_DMA_INTR))
- goto idle_irq;
-
- /* before we do anything else, clear DMA-Start bit */
- ap->ops->bmdma_stop(qc);
- bmdma_stopped = true;
-
- if (unlikely(host_stat & ATA_DMA_ERR)) {
- /* error when transfering data to/from memory */
- qc->err_mask |= AC_ERR_HOST_BUS;
- ap->hsm_task_state = HSM_ST_ERR;
- }
- }
+ return ata_sff_idle_irq(ap);
break;
case HSM_ST:
+ case HSM_ST_LAST:
break;
default:
- goto idle_irq;
+ return ata_sff_idle_irq(ap);
}
-
/* check main status, clearing INTRQ if needed */
status = ata_sff_irq_status(ap);
if (status & ATA_BUSY) {
- if (bmdma_stopped) {
+ if (hsmv_on_idle) {
/* BMDMA engine is already stopped, we're screwed */
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
} else
- goto idle_irq;
+ return ata_sff_idle_irq(ap);
}
/* clear irq events */
- ap->ops->sff_irq_clear(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
ata_sff_hsm_move(ap, qc, status, 0);
- if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATAPI_PROT_DMA))
- ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
-
return 1; /* irq handled */
-
-idle_irq:
- ap->stats.idle_irq++;
-
-#ifdef ATA_IRQ_TRAP
- if ((ap->stats.idle_irq % 1000) == 0) {
- ap->ops->sff_check_status(ap);
- ap->ops->sff_irq_clear(ap);
- ata_port_printk(ap, KERN_WARNING, "irq trap\n");
- return 1;
- }
-#endif
- return 0; /* irq not handled */
}
-EXPORT_SYMBOL_GPL(ata_sff_host_intr);
/**
- * ata_sff_interrupt - Default ATA host interrupt handler
- * @irq: irq line (unused)
- * @dev_instance: pointer to our ata_host information structure
+ * ata_sff_port_intr - Handle SFF port interrupt
+ * @ap: Port on which interrupt arrived (possibly...)
+ * @qc: Taskfile currently active in engine
*
- * Default interrupt handler for PCI IDE devices. Calls
- * ata_sff_host_intr() for each port that is not disabled.
+ * Handle port interrupt for given queued command.
*
* LOCKING:
- * Obtains host lock during operation.
+ * spin_lock_irqsave(host lock)
*
* RETURNS:
- * IRQ_NONE or IRQ_HANDLED.
+ * One if interrupt was handled, zero if not (shared irq).
*/
-irqreturn_t ata_sff_interrupt(int irq, void *dev_instance)
+unsigned int ata_sff_port_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
+{
+ return __ata_sff_port_intr(ap, qc, false);
+}
+EXPORT_SYMBOL_GPL(ata_sff_port_intr);
+
+static inline irqreturn_t __ata_sff_interrupt(int irq, void *dev_instance,
+ unsigned int (*port_intr)(struct ata_port *, struct ata_queued_cmd *))
{
struct ata_host *host = dev_instance;
bool retried = false;
@@ -1631,7 +1579,7 @@
qc = ata_qc_from_tag(ap, ap->link.active_tag);
if (qc) {
if (!(qc->tf.flags & ATA_TFLAG_POLLING))
- handled |= ata_sff_host_intr(ap, qc);
+ handled |= port_intr(ap, qc);
else
polling |= 1 << i;
} else
@@ -1658,7 +1606,8 @@
if (idle & (1 << i)) {
ap->ops->sff_check_status(ap);
- ap->ops->sff_irq_clear(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
} else {
/* clear INTRQ and check if BUSY cleared */
if (!(ap->ops->sff_check_status(ap) & ATA_BUSY))
@@ -1680,6 +1629,25 @@
return IRQ_RETVAL(handled);
}
+
+/**
+ * ata_sff_interrupt - Default SFF ATA host interrupt handler
+ * @irq: irq line (unused)
+ * @dev_instance: pointer to our ata_host information structure
+ *
+ * Default interrupt handler for PCI IDE devices. Calls
+ * ata_sff_port_intr() for each port that is not disabled.
+ *
+ * LOCKING:
+ * Obtains host lock during operation.
+ *
+ * RETURNS:
+ * IRQ_NONE or IRQ_HANDLED.
+ */
+irqreturn_t ata_sff_interrupt(int irq, void *dev_instance)
+{
+ return __ata_sff_interrupt(irq, dev_instance, ata_sff_port_intr);
+}
EXPORT_SYMBOL_GPL(ata_sff_interrupt);
/**
@@ -1717,7 +1685,7 @@
status);
/* Run the host interrupt logic as if the interrupt had not been
lost */
- ata_sff_host_intr(ap, qc);
+ ata_sff_port_intr(ap, qc);
}
EXPORT_SYMBOL_GPL(ata_sff_lost_interrupt);
@@ -1744,7 +1712,8 @@
*/
ap->ops->sff_check_status(ap);
- ap->ops->sff_irq_clear(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
}
EXPORT_SYMBOL_GPL(ata_sff_freeze);
@@ -1761,7 +1730,8 @@
{
/* clear & re-enable interrupts */
ap->ops->sff_check_status(ap);
- ap->ops->sff_irq_clear(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
ata_sff_irq_on(ap);
}
EXPORT_SYMBOL_GPL(ata_sff_thaw);
@@ -2349,13 +2319,13 @@
EXPORT_SYMBOL_GPL(ata_pci_sff_init_host);
/**
- * ata_pci_sff_prepare_host - helper to prepare native PCI ATA host
+ * ata_pci_sff_prepare_host - helper to prepare PCI PIO-only SFF ATA host
* @pdev: target PCI device
* @ppi: array of port_info, must be enough for two ports
* @r_host: out argument for the initialized ATA host
*
- * Helper to allocate ATA host for @pdev, acquire all native PCI
- * resources and initialize it accordingly in one go.
+ * Helper to allocate PIO-only SFF ATA host for @pdev, acquire
+ * all PCI resources and initialize it accordingly in one go.
*
* LOCKING:
* Inherited from calling layer (may sleep).
@@ -2385,9 +2355,6 @@
if (rc)
goto err_out;
- /* init DMA related stuff */
- ata_pci_bmdma_init(host);
-
devres_remove_group(&pdev->dev, NULL);
*r_host = host;
return 0;
@@ -2492,8 +2459,21 @@
}
EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host);
+static const struct ata_port_info *ata_sff_find_valid_pi(
+ const struct ata_port_info * const *ppi)
+{
+ int i;
+
+ /* look up the first valid port_info */
+ for (i = 0; i < 2 && ppi[i]; i++)
+ if (ppi[i]->port_ops != &ata_dummy_port_ops)
+ return ppi[i];
+
+ return NULL;
+}
+
/**
- * ata_pci_sff_init_one - Initialize/register PCI IDE host controller
+ * ata_pci_sff_init_one - Initialize/register PIO-only PCI IDE controller
* @pdev: Controller to be initialized
* @ppi: array of port_info, must be enough for two ports
* @sht: scsi_host_template to use when registering the host
@@ -2502,11 +2482,7 @@
*
* This is a helper function which can be called from a driver's
* xxx_init_one() probe function if the hardware uses traditional
- * IDE taskfile registers.
- *
- * This function calls pci_enable_device(), reserves its register
- * regions, sets the dma mask, enables bus master mode, and calls
- * ata_device_add()
+ * IDE taskfile registers and is PIO only.
*
* ASSUMPTION:
* Nobody makes a single channel controller that appears solely as
@@ -2523,20 +2499,13 @@
struct scsi_host_template *sht, void *host_priv, int hflag)
{
struct device *dev = &pdev->dev;
- const struct ata_port_info *pi = NULL;
+ const struct ata_port_info *pi;
struct ata_host *host = NULL;
- int i, rc;
+ int rc;
DPRINTK("ENTER\n");
- /* look up the first valid port_info */
- for (i = 0; i < 2 && ppi[i]; i++) {
- if (ppi[i]->port_ops != &ata_dummy_port_ops) {
- pi = ppi[i];
- break;
- }
- }
-
+ pi = ata_sff_find_valid_pi(ppi);
if (!pi) {
dev_printk(KERN_ERR, &pdev->dev,
"no valid port_info specified\n");
@@ -2557,7 +2526,6 @@
host->private_data = host_priv;
host->flags |= hflag;
- pci_set_master(pdev);
rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
out:
if (rc == 0)
@@ -2571,6 +2539,12 @@
#endif /* CONFIG_PCI */
+/*
+ * BMDMA support
+ */
+
+#ifdef CONFIG_ATA_BMDMA
+
const struct ata_port_operations ata_bmdma_port_ops = {
.inherits = &ata_sff_port_ops,
@@ -2580,6 +2554,7 @@
.qc_prep = ata_bmdma_qc_prep,
.qc_issue = ata_bmdma_qc_issue,
+ .sff_irq_clear = ata_bmdma_irq_clear,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
@@ -2804,6 +2779,75 @@
EXPORT_SYMBOL_GPL(ata_bmdma_qc_issue);
/**
+ * ata_bmdma_port_intr - Handle BMDMA port interrupt
+ * @ap: Port on which interrupt arrived (possibly...)
+ * @qc: Taskfile currently active in engine
+ *
+ * Handle port interrupt for given queued command.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * One if interrupt was handled, zero if not (shared irq).
+ */
+unsigned int ata_bmdma_port_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
+{
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+ u8 host_stat = 0;
+ bool bmdma_stopped = false;
+ unsigned int handled;
+
+ if (ap->hsm_task_state == HSM_ST_LAST && ata_is_dma(qc->tf.protocol)) {
+ /* check status of DMA engine */
+ host_stat = ap->ops->bmdma_status(ap);
+ VPRINTK("ata%u: host_stat 0x%X\n", ap->print_id, host_stat);
+
+ /* if it's not our irq... */
+ if (!(host_stat & ATA_DMA_INTR))
+ return ata_sff_idle_irq(ap);
+
+ /* before we do anything else, clear DMA-Start bit */
+ ap->ops->bmdma_stop(qc);
+ bmdma_stopped = true;
+
+ if (unlikely(host_stat & ATA_DMA_ERR)) {
+ /* error when transfering data to/from memory */
+ qc->err_mask |= AC_ERR_HOST_BUS;
+ ap->hsm_task_state = HSM_ST_ERR;
+ }
+ }
+
+ handled = __ata_sff_port_intr(ap, qc, bmdma_stopped);
+
+ if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol))
+ ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
+
+ return handled;
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_port_intr);
+
+/**
+ * ata_bmdma_interrupt - Default BMDMA ATA host interrupt handler
+ * @irq: irq line (unused)
+ * @dev_instance: pointer to our ata_host information structure
+ *
+ * Default interrupt handler for PCI IDE devices. Calls
+ * ata_bmdma_port_intr() for each port that is not disabled.
+ *
+ * LOCKING:
+ * Obtains host lock during operation.
+ *
+ * RETURNS:
+ * IRQ_NONE or IRQ_HANDLED.
+ */
+irqreturn_t ata_bmdma_interrupt(int irq, void *dev_instance)
+{
+ return __ata_sff_interrupt(irq, dev_instance, ata_bmdma_port_intr);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_interrupt);
+
+/**
* ata_bmdma_error_handler - Stock error handler for BMDMA controller
* @ap: port to handle error for
*
@@ -2848,7 +2892,8 @@
/* if we're gonna thaw, make sure IRQ is clear */
if (thaw) {
ap->ops->sff_check_status(ap);
- ap->ops->sff_irq_clear(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
}
}
@@ -2882,6 +2927,28 @@
EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
/**
+ * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Clear interrupt and error flags in DMA status register.
+ *
+ * May be used as the irq_clear() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_irq_clear(struct ata_port *ap)
+{
+ void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+ if (!mmio)
+ return;
+
+ iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
+
+/**
* ata_bmdma_setup - Set up PCI IDE BMDMA transaction
* @qc: Info associated with this ATA transaction.
*
@@ -3137,7 +3204,100 @@
}
EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);
+/**
+ * ata_pci_bmdma_prepare_host - helper to prepare PCI BMDMA ATA host
+ * @pdev: target PCI device
+ * @ppi: array of port_info, must be enough for two ports
+ * @r_host: out argument for the initialized ATA host
+ *
+ * Helper to allocate BMDMA ATA host for @pdev, acquire all PCI
+ * resources and initialize it accordingly in one go.
+ *
+ * LOCKING:
+ * Inherited from calling layer (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int ata_pci_bmdma_prepare_host(struct pci_dev *pdev,
+ const struct ata_port_info * const * ppi,
+ struct ata_host **r_host)
+{
+ int rc;
+
+ rc = ata_pci_sff_prepare_host(pdev, ppi, r_host);
+ if (rc)
+ return rc;
+
+ ata_pci_bmdma_init(*r_host);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_prepare_host);
+
+/**
+ * ata_pci_bmdma_init_one - Initialize/register BMDMA PCI IDE controller
+ * @pdev: Controller to be initialized
+ * @ppi: array of port_info, must be enough for two ports
+ * @sht: scsi_host_template to use when registering the host
+ * @host_priv: host private_data
+ * @hflags: host flags
+ *
+ * This function is similar to ata_pci_sff_init_one() but also
+ * takes care of BMDMA initialization.
+ *
+ * LOCKING:
+ * Inherited from PCI layer (may sleep).
+ *
+ * RETURNS:
+ * Zero on success, negative on errno-based value on error.
+ */
+int ata_pci_bmdma_init_one(struct pci_dev *pdev,
+ const struct ata_port_info * const * ppi,
+ struct scsi_host_template *sht, void *host_priv,
+ int hflags)
+{
+ struct device *dev = &pdev->dev;
+ const struct ata_port_info *pi;
+ struct ata_host *host = NULL;
+ int rc;
+
+ DPRINTK("ENTER\n");
+
+ pi = ata_sff_find_valid_pi(ppi);
+ if (!pi) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "no valid port_info specified\n");
+ return -EINVAL;
+ }
+
+ if (!devres_open_group(dev, NULL, GFP_KERNEL))
+ return -ENOMEM;
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ goto out;
+
+ /* prepare and activate BMDMA host */
+ rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
+ if (rc)
+ goto out;
+ host->private_data = host_priv;
+ host->flags |= hflags;
+
+ pci_set_master(pdev);
+ rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht);
+ out:
+ if (rc == 0)
+ devres_remove_group(&pdev->dev, NULL);
+ else
+ devres_release_group(&pdev->dev, NULL);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_init_one);
+
#endif /* CONFIG_PCI */
+#endif /* CONFIG_ATA_BMDMA */
/**
* ata_sff_port_init - Initialize SFF/BMDMA ATA port
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 066b9f3..c8d4703 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -260,7 +260,7 @@
return rc;
pcim_pin_device(pdev);
}
- return ata_pci_sff_init_one(pdev, ppi, &pacpi_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &pacpi_sht, NULL, 0);
}
static const struct pci_device_id pacpi_pci_tbl[] = {
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index f306e10..794ec6e 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -583,7 +583,10 @@
ppi[0] = &info_20_udma;
}
- return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL, 0);
+ if (!ppi[0]->mwdma_mask && !ppi[0]->udma_mask)
+ return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL, 0);
+ else
+ return ata_pci_bmdma_init_one(pdev, ppi, &ali_sht, NULL, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index d95eca9..620a07c 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -574,7 +574,7 @@
}
/* And fire it up */
- return ata_pci_sff_init_one(pdev, ppi, &amd_sht, hpriv, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &amd_sht, hpriv, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 4d066d6..ba43f0f 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -421,7 +421,7 @@
BUG_ON(ppi[0] == NULL);
- return ata_pci_sff_init_one(pdev, ppi, &artop_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &artop_sht, NULL, 0);
}
static const struct pci_device_id artop_pci_tbl[] = {
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 44d88b3..4375561 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -246,8 +246,8 @@
if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i]))
ppi[i] = &ata_dummy_port_info;
- return ata_pci_sff_init_one(pdev, ppi, &atiixp_sht, NULL,
- ATA_HOST_PARALLEL_SCAN);
+ return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
+ ATA_HOST_PARALLEL_SCAN);
}
static const struct pci_device_id atiixp[] = {
diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
index bb6e074..9529593 100644
--- a/drivers/ata/pata_atp867x.c
+++ b/drivers/ata/pata_atp867x.c
@@ -525,7 +525,7 @@
pci_set_master(pdev);
- rc = ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ rc = ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &atp867x_sht);
if (rc)
dev_printk(KERN_ERR, &pdev->dev, "failed to activate host\n");
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 6422cfd..9cae65d 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1214,7 +1214,7 @@
* bfin_irq_clear - Clear ATAPI interrupt.
* @ap: Port associated with this ATA transaction.
*
- * Note: Original code is ata_sff_irq_clear().
+ * Note: Original code is ata_bmdma_irq_clear().
*/
static void bfin_irq_clear(struct ata_port *ap)
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 4c81a71..9f5da1c 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -367,7 +367,7 @@
pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
#endif
- return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &cmd64x_sht, NULL, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 17c5f34..030952f 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -221,7 +221,7 @@
continue;
rc = devm_request_irq(&pdev->dev, irq[ap->port_no],
- ata_sff_interrupt, 0, DRV_NAME, host);
+ ata_bmdma_interrupt, 0, DRV_NAME, host);
if (rc)
return rc;
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index e809a42..f792330 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -324,7 +324,7 @@
ppi[1] = &info_palmax_secondary;
/* Now kick off ATA set up */
- return ata_pci_sff_init_one(pdev, ppi, &cs5530_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &cs5530_sht, NULL, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index a02e645..03a9318 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -198,7 +198,7 @@
rdmsr(ATAC_CH0D1_PIO, timings, dummy);
if (CS5535_BAD_PIO(timings))
wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
- return ata_pci_sff_init_one(dev, ppi, &cs5535_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &cs5535_sht, NULL, 0);
}
static const struct pci_device_id cs5535[] = {
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 914ae35..21ee23f 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -260,7 +260,7 @@
return -ENODEV;
}
- return ata_pci_sff_init_one(dev, ppi, &cs5536_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &cs5536_sht, NULL, 0);
}
static const struct pci_device_id cs5536[] = {
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index 0fcc096..6d915b0 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -138,7 +138,7 @@
if (PCI_FUNC(pdev->devfn) != 1)
return -ENODEV;
- return ata_pci_sff_init_one(pdev, ppi, &cy82c693_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &cy82c693_sht, NULL, 0);
}
static const struct pci_device_id cy82c693[] = {
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 3bac0e0..a088347 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -277,8 +277,8 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_sff_init_one(pdev, ppi, &efar_sht, NULL,
- ATA_HOST_PARALLEL_SCAN);
+ return ata_pci_bmdma_init_one(pdev, ppi, &efar_sht, NULL,
+ ATA_HOST_PARALLEL_SCAN);
}
static const struct pci_device_id efar_pci_tbl[] = {
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 8580eb3..7688868 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -361,7 +361,7 @@
break;
}
/* Now kick off ATA set up */
- return ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &hpt36x_sht, hpriv, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 98b498b..9ae4c08 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -987,7 +987,7 @@
}
/* Now kick off ATA set up */
- return ata_pci_sff_init_one(dev, ppi, &hpt37x_sht, private_data, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &hpt37x_sht, private_data, 0);
}
static const struct pci_device_id hpt37x[] = {
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 8b95aeb..32f3463 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -548,7 +548,7 @@
outb(inb(iobase + 0x9c) | 0x04, iobase + 0x9c);
/* Now kick off ATA set up */
- return ata_pci_sff_init_one(dev, ppi, &hpt3x2n_sht, hpriv, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &hpt3x2n_sht, hpriv, 0);
}
static const struct pci_device_id hpt3x2n[] = {
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index 727a81c..b63d5e2 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -248,7 +248,7 @@
ata_port_pbar_desc(ap, 4, offset_cmd[i], "cmd");
}
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &hpt3x3_sht);
}
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index b56e8f7..9f2889f 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -470,7 +470,7 @@
pata_icside_setup_ioaddr(ap, info->base, info, info->port[i]);
}
- return ata_host_activate(host, ec->irq, ata_sff_interrupt, 0,
+ return ata_host_activate(host, ec->irq, ata_bmdma_interrupt, 0,
&pata_icside_sht);
}
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index f971f0d..4d142a2 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -273,7 +273,7 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_sff_init_one(pdev, ppi, &it8213_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &it8213_sht, NULL, 0);
}
static const struct pci_device_id it8213_pci_tbl[] = {
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 2bd2b00..bf88f71 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -933,7 +933,7 @@
else
ppi[0] = &info_smart;
}
- return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &it821x_sht, NULL, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 565e01e..cb3babb 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -144,7 +144,7 @@
};
const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_sff_init_one(pdev, ppi, &jmicron_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &jmicron_sht, NULL, 0);
}
static const struct pci_device_id jmicron_pci_tbl[] = {
diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c
index b5b48e7..75b49d0 100644
--- a/drivers/ata/pata_macio.c
+++ b/drivers/ata/pata_macio.c
@@ -1110,7 +1110,7 @@
/* Start it up */
priv->irq = irq;
- return ata_host_activate(priv->host, irq, ata_sff_interrupt, 0,
+ return ata_host_activate(priv->host, irq, ata_bmdma_interrupt, 0,
&pata_macio_sht);
}
@@ -1355,8 +1355,11 @@
static struct macio_driver pata_macio_driver =
{
- .name = "pata-macio",
- .match_table = pata_macio_match,
+ .driver = {
+ .name = "pata-macio",
+ .owner = THIS_MODULE,
+ .of_match_table = pata_macio_match,
+ },
.probe = pata_macio_attach,
.remove = pata_macio_detach,
#ifdef CONFIG_PM
@@ -1366,9 +1369,6 @@
#ifdef CONFIG_PMAC_MEDIABAY
.mediabay_event = pata_macio_mb_event,
#endif
- .driver = {
- .owner = THIS_MODULE,
- },
};
static const struct pci_device_id pata_macio_pci_match[] = {
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index e8ca02e..dd38083 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -153,7 +153,7 @@
return -ENODEV;
}
#endif
- return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &marvell_sht, NULL, 0);
}
static const struct pci_device_id marvell_pci_tbl[] = {
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 36afe2c..f087ab5 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -659,7 +659,7 @@
ata_port_desc(ap, "ata_regs 0x%lx", raw_ata_regs);
/* activate host */
- return ata_host_activate(host, priv->ata_irq, ata_sff_interrupt, 0,
+ return ata_host_activate(host, priv->ata_irq, ata_bmdma_interrupt, 0,
&mpc52xx_ata_sht);
}
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 94f979a..3eb921c 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -82,7 +82,7 @@
ata_pci_bmdma_clear_simplex(pdev);
/* And let the library code do the work */
- return ata_pci_sff_init_one(pdev, port_info, &netcell_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, port_info, &netcell_sht, NULL, 0);
}
static const struct pci_device_id netcell_pci_tbl[] = {
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index dd53a66..cc50bd0 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -149,7 +149,7 @@
ninja32_program(base);
/* FIXME: Should we disable them at remove ? */
- return ata_host_activate(host, dev->irq, ata_sff_interrupt,
+ return ata_host_activate(host, dev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &ninja32_sht);
}
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index fdbba2d..605f198 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -380,7 +380,7 @@
ns87415_fixup(pdev);
- return ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &ns87415_sht, NULL, 0);
}
static const struct pci_device_id ns87415_pci_tbl[] = {
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 3001109..06ddd91 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -750,20 +750,6 @@
}
/*
- * Trap if driver tries to do standard bmdma commands. They are not
- * supported.
- */
-static void unreachable_qc(struct ata_queued_cmd *qc)
-{
- BUG();
-}
-
-static u8 unreachable_port(struct ata_port *ap)
-{
- BUG();
-}
-
-/*
* We don't do ATAPI DMA so return 0.
*/
static int octeon_cf_check_atapi_dma(struct ata_queued_cmd *qc)
@@ -804,10 +790,6 @@
.sff_dev_select = octeon_cf_dev_select,
.sff_irq_on = octeon_cf_irq_on,
.sff_irq_clear = octeon_cf_irq_clear,
- .bmdma_setup = unreachable_qc,
- .bmdma_start = unreachable_qc,
- .bmdma_stop = unreachable_qc,
- .bmdma_status = unreachable_port,
.cable_detect = ata_cable_40wire,
.set_piomode = octeon_cf_set_piomode,
.set_dmamode = octeon_cf_set_dmamode,
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 988ef26..b811c16 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -248,7 +248,7 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_sff_init_one(pdev, ppi, &oldpiix_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &oldpiix_sht, NULL, 0);
}
static const struct pci_device_id oldpiix_pci_tbl[] = {
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 76b7d12..0852cd0 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -429,7 +429,7 @@
if (optiplus_with_udma(dev))
ppi[0] = &info_82c700_udma;
- return ata_pci_sff_init_one(dev, ppi, &optidma_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &optidma_sht, NULL, 0);
}
static const struct pci_device_id optidma[] = {
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 09f1f22..b183511 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -754,7 +754,7 @@
return -EIO;
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &pdc2027x_sht);
}
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index fa1e2f3..c39f213 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -337,7 +337,7 @@
return -ENODEV;
}
}
- return ata_pci_sff_init_one(dev, ppi, &pdc202xx_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &pdc202xx_sht, NULL, 0);
}
static const struct pci_device_id pdc202xx[] = {
diff --git a/drivers/ata/pata_piccolo.c b/drivers/ata/pata_piccolo.c
index 9816154..cb01bf9 100644
--- a/drivers/ata/pata_piccolo.c
+++ b/drivers/ata/pata_piccolo.c
@@ -95,7 +95,7 @@
};
const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
/* Just one port for the moment */
- return ata_pci_sff_init_one(dev, ppi, &tosh_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &tosh_sht, NULL, 0);
}
static struct pci_device_id ata_tosh[] = {
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index a5fa388..8574b31 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -227,7 +227,7 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_sff_init_one(pdev, ppi, &radisys_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &radisys_sht, NULL, 0);
}
static const struct pci_device_id radisys_pci_tbl[] = {
diff --git a/drivers/ata/pata_rdc.c b/drivers/ata/pata_rdc.c
index 37092cf..5fbe9b1 100644
--- a/drivers/ata/pata_rdc.c
+++ b/drivers/ata/pata_rdc.c
@@ -344,7 +344,7 @@
*/
pci_read_config_dword(pdev, 0x54, &hpriv->saved_iocfg);
- rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
host->private_data = hpriv;
@@ -354,7 +354,7 @@
host->flags |= ATA_HOST_PARALLEL_SCAN;
pci_set_master(pdev);
- return ata_pci_sff_activate_host(host, ata_sff_interrupt, &rdc_sht);
+ return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, &rdc_sht);
}
static void rdc_remove_one(struct pci_dev *pdev)
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 6b5b63a..e2c1825 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -237,7 +237,7 @@
};
const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &sc1200_sht, NULL, 0);
}
static const struct pci_device_id sc1200[] = {
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 6f6193b..d9db3f8 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -875,7 +875,7 @@
* scc_irq_clear - Clear PCI IDE BMDMA interrupt.
* @ap: Port associated with this ATA transaction.
*
- * Note: Original code is ata_sff_irq_clear().
+ * Note: Original code is ata_bmdma_irq_clear().
*/
static void scc_irq_clear (struct ata_port *ap)
@@ -1105,7 +1105,7 @@
if (rc)
return rc;
- return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &scc_sht);
}
diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c
index 86b3d01..e97b32f 100644
--- a/drivers/ata/pata_sch.c
+++ b/drivers/ata/pata_sch.c
@@ -179,7 +179,7 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_sff_init_one(pdev, ppi, &sch_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &sch_sht, NULL, 0);
}
static int __init sch_init(void)
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 43ea389..86dd714 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -460,7 +460,7 @@
if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
ata_pci_bmdma_clear_simplex(pdev);
- return ata_pci_sff_init_one(pdev, ppi, &serverworks_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &serverworks_sht, NULL, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 43faf10..d3190d7 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -374,11 +374,11 @@
ata_sff_std_ports(&host->ports[1]->ioaddr);
/* Register & activate */
- return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &sil680_sht);
use_ioports:
- return ata_pci_sff_init_one(pdev, ppi, &sil680_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &sil680_sht, NULL, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index b670803..60cea13 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -826,7 +826,7 @@
sis_fixup(pdev, chipset);
- return ata_pci_sff_init_one(pdev, ppi, &sis_sht, chipset, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &sis_sht, chipset, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 733b042..98548f6 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -316,7 +316,7 @@
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
pci_write_config_dword(dev, 0x40, val);
- return ata_pci_sff_init_one(dev, ppi, &sl82c105_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &sl82c105_sht, NULL, 0);
}
static const struct pci_device_id sl82c105[] = {
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 48f5060..0d1f89e 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -201,7 +201,7 @@
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
- return ata_pci_sff_init_one(dev, ppi, &triflex_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &triflex_sht, NULL, 0);
}
static const struct pci_device_id triflex[] = {
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 7e3e0a5..5e65988 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -627,7 +627,7 @@
}
/* We have established the device type, now fire it up */
- return ata_pci_sff_init_one(pdev, ppi, &via_sht, (void *)config, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &via_sht, (void *)config, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index f3471bc..a476cd9 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -675,8 +675,6 @@
.freeze = mv_eh_freeze,
.thaw = mv_eh_thaw,
.hardreset = mv_hardreset,
- .error_handler = ata_std_error_handler, /* avoid SFF EH */
- .post_internal_cmd = ATA_OP_NULL,
.scr_read = mv5_scr_read,
.scr_write = mv5_scr_write,
@@ -2813,7 +2811,7 @@
} else if (!edma_was_enabled) {
struct ata_queued_cmd *qc = mv_get_active_qc(ap);
if (qc)
- ata_sff_host_intr(ap, qc);
+ ata_bmdma_port_intr(ap, qc);
else
mv_unexpected_intr(ap, edma_was_enabled);
}
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index baa8f0d..2116113 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -920,7 +920,7 @@
}
/* handle interrupt */
- return ata_sff_host_intr(ap, qc);
+ return ata_bmdma_port_intr(ap, qc);
}
static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
@@ -1100,7 +1100,7 @@
u32 notifier_clears[2];
if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
- ata_sff_irq_clear(ap);
+ ata_bmdma_irq_clear(ap);
return;
}
@@ -1505,7 +1505,7 @@
qc = ata_qc_from_tag(ap, ap->link.active_tag);
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
- handled += ata_sff_host_intr(ap, qc);
+ handled += ata_bmdma_port_intr(ap, qc);
} else {
/*
* No request pending? Clear interrupt status
@@ -1669,7 +1669,6 @@
mask = readl(mmio_base + NV_INT_ENABLE_MCP55);
mask &= ~(NV_INT_ALL_MCP55 << shift);
writel(mask, mmio_base + NV_INT_ENABLE_MCP55);
- ata_sff_freeze(ap);
}
static void nv_mcp55_thaw(struct ata_port *ap)
@@ -1683,7 +1682,6 @@
mask = readl(mmio_base + NV_INT_ENABLE_MCP55);
mask |= (NV_INT_MASK_MCP55 << shift);
writel(mask, mmio_base + NV_INT_ENABLE_MCP55);
- ata_sff_thaw(ap);
}
static void nv_adma_error_handler(struct ata_port *ap)
@@ -2430,7 +2428,7 @@
ppi[0] = &nv_port_info[type];
ipriv = ppi[0]->private_data;
- rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index d533b3d..daeebf1 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -120,8 +120,6 @@
static void qs_qc_prep(struct ata_queued_cmd *qc);
static unsigned int qs_qc_issue(struct ata_queued_cmd *qc);
static int qs_check_atapi_dma(struct ata_queued_cmd *qc);
-static void qs_bmdma_stop(struct ata_queued_cmd *qc);
-static u8 qs_bmdma_status(struct ata_port *ap);
static void qs_freeze(struct ata_port *ap);
static void qs_thaw(struct ata_port *ap);
static int qs_prereset(struct ata_link *link, unsigned long deadline);
@@ -137,8 +135,6 @@
.inherits = &ata_sff_port_ops,
.check_atapi_dma = qs_check_atapi_dma,
- .bmdma_stop = qs_bmdma_stop,
- .bmdma_status = qs_bmdma_status,
.qc_prep = qs_qc_prep,
.qc_issue = qs_qc_issue,
@@ -190,16 +186,6 @@
return 1; /* ATAPI DMA not supported */
}
-static void qs_bmdma_stop(struct ata_queued_cmd *qc)
-{
- /* nothing */
-}
-
-static u8 qs_bmdma_status(struct ata_port *ap)
-{
- return 0;
-}
-
static inline void qs_enter_reg_mode(struct ata_port *ap)
{
u8 __iomem *chan = qs_mmio_base(ap->host) + (ap->port_no * 0x4000);
@@ -454,7 +440,7 @@
if (!pp || pp->state != qs_state_mmio)
continue;
if (!(qc->tf.flags & ATA_TFLAG_POLLING))
- handled |= ata_sff_host_intr(ap, qc);
+ handled |= ata_sff_port_intr(ap, qc);
}
return handled;
}
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 2dda312..3a4f842 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -503,7 +503,7 @@
goto err_hsm;
/* ack bmdma irq events */
- ata_sff_irq_clear(ap);
+ ata_bmdma_irq_clear(ap);
/* kick HSM in the ass */
ata_sff_hsm_move(ap, qc, status, 0);
@@ -584,7 +584,7 @@
/* clear IRQ */
ap->ops->sff_check_status(ap);
- ata_sff_irq_clear(ap);
+ ata_bmdma_irq_clear(ap);
/* turn on SATA IRQ if supported */
if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ))
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index e925051..be7726d 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -539,12 +539,12 @@
writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
/* zero error counters. */
- writel(0x8000, port + PORT_DECODE_ERR_THRESH);
- writel(0x8000, port + PORT_CRC_ERR_THRESH);
- writel(0x8000, port + PORT_HSHK_ERR_THRESH);
- writel(0x0000, port + PORT_DECODE_ERR_CNT);
- writel(0x0000, port + PORT_CRC_ERR_CNT);
- writel(0x0000, port + PORT_HSHK_ERR_CNT);
+ writew(0x8000, port + PORT_DECODE_ERR_THRESH);
+ writew(0x8000, port + PORT_CRC_ERR_THRESH);
+ writew(0x8000, port + PORT_HSHK_ERR_THRESH);
+ writew(0x0000, port + PORT_DECODE_ERR_CNT);
+ writew(0x0000, port + PORT_CRC_ERR_CNT);
+ writew(0x0000, port + PORT_HSHK_ERR_CNT);
/* always use 64bit activation */
writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
@@ -622,6 +622,11 @@
irq_enabled = readl(port + PORT_IRQ_ENABLE_SET);
writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR);
+ /*
+ * The barrier is required to ensure that writes to cmd_block reach
+ * the memory before the write to PORT_CMD_ACTIVATE.
+ */
+ wmb();
writel((u32)paddr, port + PORT_CMD_ACTIVATE);
writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
@@ -865,7 +870,7 @@
} else {
prb = &cb->atapi.prb;
sge = cb->atapi.sge;
- memset(cb->atapi.cdb, 0, 32);
+ memset(cb->atapi.cdb, 0, sizeof(cb->atapi.cdb));
memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len);
if (ata_is_data(qc->tf.protocol)) {
@@ -895,6 +900,11 @@
paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block);
activate = port + PORT_CMD_ACTIVATE + tag * 8;
+ /*
+ * The barrier is required to ensure that writes to cmd_block reach
+ * the memory before the write to PORT_CMD_ACTIVATE.
+ */
+ wmb();
writel((u32)paddr, activate);
writel((u64)paddr >> 32, activate + 4);
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index f8a91bf..2bfe3ae 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -279,7 +279,7 @@
break;
}
- rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
@@ -308,7 +308,7 @@
pci_set_master(pdev);
pci_intx(pdev, 1);
- return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &sis_sht);
}
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 101fd6a..7d9db4a 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -502,7 +502,7 @@
writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &k2_sata_sht);
}
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index d8dac17..b8578c3 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -242,7 +242,7 @@
pci_set_master(pdev);
pci_intx(pdev, 1);
- return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &uli_sht);
}
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 08f6549..4730c42 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -308,7 +308,7 @@
* certain way. Leave it alone and just clear pending IRQ.
*/
ap->ops->sff_check_status(ap);
- ata_sff_irq_clear(ap);
+ ata_bmdma_irq_clear(ap);
}
/**
@@ -463,7 +463,7 @@
struct ata_host *host;
int rc;
- rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
*r_host = host;
@@ -520,7 +520,7 @@
struct ata_host *host;
int i, rc;
- rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
*r_host = host;
@@ -575,6 +575,33 @@
tmp8 |= NATIVE_MODE_ALL;
pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
}
+
+ /*
+ * vt6421 has problems talking to some drives. The following
+ * is the fix from Joseph Chan <JosephChan@via.com.tw>.
+ *
+ * When host issues HOLD, device may send up to 20DW of data
+ * before acknowledging it with HOLDA and the host should be
+ * able to buffer them in FIFO. Unfortunately, some WD drives
+ * send upto 40DW before acknowledging HOLD and, in the
+ * default configuration, this ends up overflowing vt6421's
+ * FIFO, making the controller abort the transaction with
+ * R_ERR.
+ *
+ * Rx52[2] is the internal 128DW FIFO Flow control watermark
+ * adjusting mechanism enable bit and the default value 0
+ * means host will issue HOLD to device when the left FIFO
+ * size goes below 32DW. Setting it to 1 makes the watermark
+ * 64DW.
+ *
+ * https://bugzilla.kernel.org/show_bug.cgi?id=15173
+ * http://article.gmane.org/gmane.linux.ide/46352
+ */
+ if (pdev->device == 0x3249) {
+ pci_read_config_byte(pdev, 0x52, &tmp8);
+ tmp8 |= 1 << 2;
+ pci_write_config_byte(pdev, 0x52, tmp8);
+ }
}
static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
@@ -628,7 +655,7 @@
svia_configure(pdev);
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &svia_sht);
}
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 2107952..b777176 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -245,7 +245,7 @@
qc = ata_qc_from_tag(ap, ap->link.active_tag);
if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
- handled = ata_sff_host_intr(ap, qc);
+ handled = ata_bmdma_port_intr(ap, qc);
/* We received an interrupt during a polled command,
* or some other spurious condition. Interrupt reporting
diff --git a/drivers/base/topology.c b/drivers/base/topology.c
index bf6b132..9fc630c 100644
--- a/drivers/base/topology.c
+++ b/drivers/base/topology.c
@@ -162,7 +162,7 @@
topology_remove_dev(cpu);
break;
}
- return rc ? NOTIFY_BAD : NOTIFY_OK;
+ return notifier_from_errno(rc);
}
static int __cpuinit topology_sysfs_init(void)
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index 6081e81..f1bf79d 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -133,6 +133,28 @@
return page;
}
+static void brd_free_page(struct brd_device *brd, sector_t sector)
+{
+ struct page *page;
+ pgoff_t idx;
+
+ spin_lock(&brd->brd_lock);
+ idx = sector >> PAGE_SECTORS_SHIFT;
+ page = radix_tree_delete(&brd->brd_pages, idx);
+ spin_unlock(&brd->brd_lock);
+ if (page)
+ __free_page(page);
+}
+
+static void brd_zero_page(struct brd_device *brd, sector_t sector)
+{
+ struct page *page;
+
+ page = brd_lookup_page(brd, sector);
+ if (page)
+ clear_highpage(page);
+}
+
/*
* Free all backing store pages and radix tree. This must only be called when
* there are no other users of the device.
@@ -189,6 +211,24 @@
return 0;
}
+static void discard_from_brd(struct brd_device *brd,
+ sector_t sector, size_t n)
+{
+ while (n >= PAGE_SIZE) {
+ /*
+ * Don't want to actually discard pages here because
+ * re-allocating the pages can result in writeback
+ * deadlocks under heavy load.
+ */
+ if (0)
+ brd_free_page(brd, sector);
+ else
+ brd_zero_page(brd, sector);
+ sector += PAGE_SIZE >> SECTOR_SHIFT;
+ n -= PAGE_SIZE;
+ }
+}
+
/*
* Copy n bytes from src to the brd starting at sector. Does not sleep.
*/
@@ -300,6 +340,12 @@
get_capacity(bdev->bd_disk))
goto out;
+ if (unlikely(bio_rw_flagged(bio, BIO_RW_DISCARD))) {
+ err = 0;
+ discard_from_brd(brd, sector, bio->bi_size);
+ goto out;
+ }
+
rw = bio_rw(bio);
if (rw == READA)
rw = READ;
@@ -320,7 +366,7 @@
}
#ifdef CONFIG_BLK_DEV_XIP
-static int brd_direct_access (struct block_device *bdev, sector_t sector,
+static int brd_direct_access(struct block_device *bdev, sector_t sector,
void **kaddr, unsigned long *pfn)
{
struct brd_device *brd = bdev->bd_disk->private_data;
@@ -437,6 +483,11 @@
blk_queue_max_hw_sectors(brd->brd_queue, 1024);
blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY);
+ brd->brd_queue->limits.discard_granularity = PAGE_SIZE;
+ brd->brd_queue->limits.max_discard_sectors = UINT_MAX;
+ brd->brd_queue->limits.discard_zeroes_data = 1;
+ queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, brd->brd_queue);
+
disk = brd->brd_disk = alloc_disk(1 << part_shift);
if (!disk)
goto out_free_queue;
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index e1d0e2c..72dae92 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -188,11 +188,11 @@
sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
+ stk->top++;
if (stk->top >= CMD_STACK_SIZE) {
printk("cciss: scsi_cmd_free called too many times.\n");
BUG();
}
- stk->top++;
stk->elem[stk->top] = (struct cciss_scsi_cmd_stack_elem_t *) cmd;
}
@@ -861,6 +861,7 @@
sh->n_io_port = 0; // I don't think we use these two...
sh->this_id = SELF_SCSI_ID;
sh->sg_tablesize = hba[ctlr]->maxsgentries;
+ sh->max_cmd_len = MAX_COMMAND_SIZE;
((struct cciss_scsi_adapter_data_t *)
hba[ctlr]->scsi_ctlr)->scsi_host = sh;
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index 91d1163..abb4ec6 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -386,7 +386,7 @@
}
/* pdev is NULL for eisa */
-static int __init cpqarray_register_ctlr( int i, struct pci_dev *pdev)
+static int __devinit cpqarray_register_ctlr( int i, struct pci_dev *pdev)
{
struct request_queue *q;
int j;
@@ -503,7 +503,7 @@
return -1;
}
-static int __init cpqarray_init_one( struct pci_dev *pdev,
+static int __devinit cpqarray_init_one( struct pci_dev *pdev,
const struct pci_device_id *ent)
{
int i;
@@ -740,7 +740,7 @@
/*
* Find an EISA controller's signature. Set up an hba if we find it.
*/
-static int __init cpqarray_eisa_detect(void)
+static int __devinit cpqarray_eisa_detect(void)
{
int i=0, j;
__u32 board_id;
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index e9654c8..485ed8c 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -943,8 +943,7 @@
struct drbd_work resync_work,
unplug_work,
md_sync_work,
- delay_probe_work,
- uuid_work;
+ delay_probe_work;
struct timer_list resync_timer;
struct timer_list md_sync_timer;
struct timer_list delay_probe_timer;
@@ -1069,7 +1068,6 @@
struct timeval dps_time; /* delay-probes-start-time */
unsigned int dp_volume_last; /* send_cnt of last delay probe */
int c_sync_rate; /* current resync rate after delay_probe magic */
- atomic_t new_c_uuid;
};
static inline struct drbd_conf *minor_to_mdev(unsigned int minor)
@@ -1476,7 +1474,6 @@
extern int w_ov_finished(struct drbd_conf *, struct drbd_work *, int);
extern int w_resync_inactive(struct drbd_conf *, struct drbd_work *, int);
extern int w_resume_next_sg(struct drbd_conf *, struct drbd_work *, int);
-extern int w_io_error(struct drbd_conf *, struct drbd_work *, int);
extern int w_send_write_hint(struct drbd_conf *, struct drbd_work *, int);
extern int w_make_resync_request(struct drbd_conf *, struct drbd_work *, int);
extern int w_send_dblock(struct drbd_conf *, struct drbd_work *, int);
@@ -1542,7 +1539,7 @@
static inline void drbd_tcp_quickack(struct socket *sock)
{
- int __user val = 1;
+ int __user val = 2;
(void) drbd_setsockopt(sock, SOL_TCP, TCP_QUICKACK,
(char __user *)&val, sizeof(val));
}
@@ -1728,7 +1725,7 @@
switch (mdev->ldev->dc.on_io_error) {
case EP_PASS_ON:
if (!forcedetach) {
- if (printk_ratelimit())
+ if (__ratelimit(&drbd_ratelimit_state))
dev_err(DEV, "Local IO failed in %s."
"Passing error on...\n", where);
break;
@@ -2219,8 +2216,6 @@
return 0;
if (test_bit(BITMAP_IO, &mdev->flags))
return 0;
- if (atomic_read(&mdev->new_c_uuid))
- return 0;
return 1;
}
@@ -2241,9 +2236,6 @@
* to avoid races with the reconnect code,
* we need to atomic_inc within the spinlock. */
- if (atomic_read(&mdev->new_c_uuid) && atomic_add_unless(&mdev->new_c_uuid, -1, 1))
- drbd_queue_work_front(&mdev->data.work, &mdev->uuid_work);
-
spin_lock_irq(&mdev->req_lock);
while (!__inc_ap_bio_cond(mdev)) {
prepare_to_wait(&mdev->misc_wait, &wait, TASK_UNINTERRUPTIBLE);
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index be2d2da..7258c95 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -1215,18 +1215,17 @@
ns.pdsk == D_OUTDATED)) {
if (get_ldev(mdev)) {
if ((ns.role == R_PRIMARY || ns.peer == R_PRIMARY) &&
- mdev->ldev->md.uuid[UI_BITMAP] == 0 && ns.disk >= D_UP_TO_DATE &&
- !atomic_read(&mdev->new_c_uuid))
- atomic_set(&mdev->new_c_uuid, 2);
+ mdev->ldev->md.uuid[UI_BITMAP] == 0 && ns.disk >= D_UP_TO_DATE) {
+ drbd_uuid_new_current(mdev);
+ drbd_send_uuids(mdev);
+ }
put_ldev(mdev);
}
}
if (ns.pdsk < D_INCONSISTENT && get_ldev(mdev)) {
- /* Diskless peer becomes primary or got connected do diskless, primary peer. */
- if (ns.peer == R_PRIMARY && mdev->ldev->md.uuid[UI_BITMAP] == 0 &&
- !atomic_read(&mdev->new_c_uuid))
- atomic_set(&mdev->new_c_uuid, 2);
+ if (ns.peer == R_PRIMARY && mdev->ldev->md.uuid[UI_BITMAP] == 0)
+ drbd_uuid_new_current(mdev);
/* D_DISKLESS Peer becomes secondary */
if (os.peer == R_PRIMARY && ns.peer == R_SECONDARY)
@@ -1237,8 +1236,6 @@
/* Last part of the attaching process ... */
if (ns.conn >= C_CONNECTED &&
os.disk == D_ATTACHING && ns.disk == D_NEGOTIATING) {
- kfree(mdev->p_uuid); /* We expect to receive up-to-date UUIDs soon. */
- mdev->p_uuid = NULL; /* ...to not use the old ones in the mean time */
drbd_send_sizes(mdev, 0, 0); /* to start sync... */
drbd_send_uuids(mdev);
drbd_send_state(mdev);
@@ -1350,24 +1347,6 @@
drbd_md_sync(mdev);
}
-static int w_new_current_uuid(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
-{
- if (get_ldev(mdev)) {
- if (mdev->ldev->md.uuid[UI_BITMAP] == 0) {
- drbd_uuid_new_current(mdev);
- if (get_net_conf(mdev)) {
- drbd_send_uuids(mdev);
- put_net_conf(mdev);
- }
- drbd_md_sync(mdev);
- }
- put_ldev(mdev);
- }
- atomic_dec(&mdev->new_c_uuid);
- wake_up(&mdev->misc_wait);
-
- return 1;
-}
static int drbd_thread_setup(void *arg)
{
@@ -2291,9 +2270,9 @@
* with page_count == 0 or PageSlab.
*/
static int _drbd_no_send_page(struct drbd_conf *mdev, struct page *page,
- int offset, size_t size)
+ int offset, size_t size, unsigned msg_flags)
{
- int sent = drbd_send(mdev, mdev->data.socket, kmap(page) + offset, size, 0);
+ int sent = drbd_send(mdev, mdev->data.socket, kmap(page) + offset, size, msg_flags);
kunmap(page);
if (sent == size)
mdev->send_cnt += size>>9;
@@ -2301,7 +2280,7 @@
}
static int _drbd_send_page(struct drbd_conf *mdev, struct page *page,
- int offset, size_t size)
+ int offset, size_t size, unsigned msg_flags)
{
mm_segment_t oldfs = get_fs();
int sent, ok;
@@ -2314,14 +2293,15 @@
* __page_cache_release a page that would actually still be referenced
* by someone, leading to some obscure delayed Oops somewhere else. */
if (disable_sendpage || (page_count(page) < 1) || PageSlab(page))
- return _drbd_no_send_page(mdev, page, offset, size);
+ return _drbd_no_send_page(mdev, page, offset, size, msg_flags);
+ msg_flags |= MSG_NOSIGNAL;
drbd_update_congested(mdev);
set_fs(KERNEL_DS);
do {
sent = mdev->data.socket->ops->sendpage(mdev->data.socket, page,
offset, len,
- MSG_NOSIGNAL);
+ msg_flags);
if (sent == -EAGAIN) {
if (we_should_drop_the_connection(mdev,
mdev->data.socket))
@@ -2350,9 +2330,11 @@
{
struct bio_vec *bvec;
int i;
+ /* hint all but last page with MSG_MORE */
__bio_for_each_segment(bvec, bio, i, 0) {
if (!_drbd_no_send_page(mdev, bvec->bv_page,
- bvec->bv_offset, bvec->bv_len))
+ bvec->bv_offset, bvec->bv_len,
+ i == bio->bi_vcnt -1 ? 0 : MSG_MORE))
return 0;
}
return 1;
@@ -2362,12 +2344,13 @@
{
struct bio_vec *bvec;
int i;
+ /* hint all but last page with MSG_MORE */
__bio_for_each_segment(bvec, bio, i, 0) {
if (!_drbd_send_page(mdev, bvec->bv_page,
- bvec->bv_offset, bvec->bv_len))
+ bvec->bv_offset, bvec->bv_len,
+ i == bio->bi_vcnt -1 ? 0 : MSG_MORE))
return 0;
}
-
return 1;
}
@@ -2375,9 +2358,11 @@
{
struct page *page = e->pages;
unsigned len = e->size;
+ /* hint all but last page with MSG_MORE */
page_chain_for_each(page) {
unsigned l = min_t(unsigned, len, PAGE_SIZE);
- if (!_drbd_send_page(mdev, page, 0, l))
+ if (!_drbd_send_page(mdev, page, 0, l,
+ page_chain_next(page) ? MSG_MORE : 0))
return 0;
len -= l;
}
@@ -2457,11 +2442,11 @@
p.dp_flags = cpu_to_be32(dp_flags);
set_bit(UNPLUG_REMOTE, &mdev->flags);
ok = (sizeof(p) ==
- drbd_send(mdev, mdev->data.socket, &p, sizeof(p), MSG_MORE));
+ drbd_send(mdev, mdev->data.socket, &p, sizeof(p), dgs ? MSG_MORE : 0));
if (ok && dgs) {
dgb = mdev->int_dig_out;
drbd_csum_bio(mdev, mdev->integrity_w_tfm, req->master_bio, dgb);
- ok = drbd_send(mdev, mdev->data.socket, dgb, dgs, MSG_MORE);
+ ok = drbd_send(mdev, mdev->data.socket, dgb, dgs, 0);
}
if (ok) {
if (mdev->net_conf->wire_protocol == DRBD_PROT_A)
@@ -2510,11 +2495,11 @@
return 0;
ok = sizeof(p) == drbd_send(mdev, mdev->data.socket, &p,
- sizeof(p), MSG_MORE);
+ sizeof(p), dgs ? MSG_MORE : 0);
if (ok && dgs) {
dgb = mdev->int_dig_out;
drbd_csum_ee(mdev, mdev->integrity_w_tfm, e, dgb);
- ok = drbd_send(mdev, mdev->data.socket, dgb, dgs, MSG_MORE);
+ ok = drbd_send(mdev, mdev->data.socket, dgb, dgs, 0);
}
if (ok)
ok = _drbd_send_zc_ee(mdev, e);
@@ -2708,7 +2693,6 @@
atomic_set(&mdev->net_cnt, 0);
atomic_set(&mdev->packet_seq, 0);
atomic_set(&mdev->pp_in_use, 0);
- atomic_set(&mdev->new_c_uuid, 0);
mutex_init(&mdev->md_io_mutex);
mutex_init(&mdev->data.mutex);
@@ -2739,14 +2723,12 @@
INIT_LIST_HEAD(&mdev->bm_io_work.w.list);
INIT_LIST_HEAD(&mdev->delay_probes);
INIT_LIST_HEAD(&mdev->delay_probe_work.list);
- INIT_LIST_HEAD(&mdev->uuid_work.list);
mdev->resync_work.cb = w_resync_inactive;
mdev->unplug_work.cb = w_send_write_hint;
mdev->md_sync_work.cb = w_md_sync;
mdev->bm_io_work.w.cb = w_bitmap_io;
mdev->delay_probe_work.cb = w_delay_probes;
- mdev->uuid_work.cb = w_new_current_uuid;
init_timer(&mdev->resync_timer);
init_timer(&mdev->md_sync_timer);
init_timer(&mdev->delay_probe_timer);
@@ -3799,7 +3781,7 @@
if (ret) {
fault_count++;
- if (printk_ratelimit())
+ if (__ratelimit(&drbd_ratelimit_state))
dev_warn(DEV, "***Simulating %s failure\n",
_drbd_fault_str(type));
}
diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index 632e324..2151f18 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -1114,6 +1114,12 @@
mdev->new_state_tmp.i = ns.i;
ns.i = os.i;
ns.disk = D_NEGOTIATING;
+
+ /* We expect to receive up-to-date UUIDs soon.
+ To avoid a race in receive_state, free p_uuid while
+ holding req_lock. I.e. atomic with the state change */
+ kfree(mdev->p_uuid);
+ mdev->p_uuid = NULL;
}
rv = _drbd_set_state(mdev, ns, CS_VERBOSE, NULL);
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index bc9ab7f..dff4870 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -42,7 +42,6 @@
#include <linux/unistd.h>
#include <linux/vmalloc.h>
#include <linux/random.h>
-#include <linux/mm.h>
#include <linux/string.h>
#include <linux/scatterlist.h>
#include "drbd_int.h"
@@ -571,6 +570,25 @@
return rv;
}
+/* quoting tcp(7):
+ * On individual connections, the socket buffer size must be set prior to the
+ * listen(2) or connect(2) calls in order to have it take effect.
+ * This is our wrapper to do so.
+ */
+static void drbd_setbufsize(struct socket *sock, unsigned int snd,
+ unsigned int rcv)
+{
+ /* open coded SO_SNDBUF, SO_RCVBUF */
+ if (snd) {
+ sock->sk->sk_sndbuf = snd;
+ sock->sk->sk_userlocks |= SOCK_SNDBUF_LOCK;
+ }
+ if (rcv) {
+ sock->sk->sk_rcvbuf = rcv;
+ sock->sk->sk_userlocks |= SOCK_RCVBUF_LOCK;
+ }
+}
+
static struct socket *drbd_try_connect(struct drbd_conf *mdev)
{
const char *what;
@@ -592,6 +610,8 @@
sock->sk->sk_rcvtimeo =
sock->sk->sk_sndtimeo = mdev->net_conf->try_connect_int*HZ;
+ drbd_setbufsize(sock, mdev->net_conf->sndbuf_size,
+ mdev->net_conf->rcvbuf_size);
/* explicitly bind to the configured IP as source IP
* for the outgoing connections.
@@ -670,6 +690,8 @@
s_listen->sk->sk_reuse = 1; /* SO_REUSEADDR */
s_listen->sk->sk_rcvtimeo = timeo;
s_listen->sk->sk_sndtimeo = timeo;
+ drbd_setbufsize(s_listen, mdev->net_conf->sndbuf_size,
+ mdev->net_conf->rcvbuf_size);
what = "bind before listen";
err = s_listen->ops->bind(s_listen,
@@ -856,16 +878,6 @@
sock->sk->sk_priority = TC_PRIO_INTERACTIVE_BULK;
msock->sk->sk_priority = TC_PRIO_INTERACTIVE;
- if (mdev->net_conf->sndbuf_size) {
- sock->sk->sk_sndbuf = mdev->net_conf->sndbuf_size;
- sock->sk->sk_userlocks |= SOCK_SNDBUF_LOCK;
- }
-
- if (mdev->net_conf->rcvbuf_size) {
- sock->sk->sk_rcvbuf = mdev->net_conf->rcvbuf_size;
- sock->sk->sk_userlocks |= SOCK_RCVBUF_LOCK;
- }
-
/* NOT YET ...
* sock->sk->sk_sndtimeo = mdev->net_conf->timeout*HZ/10;
* sock->sk->sk_rcvtimeo = MAX_SCHEDULE_TIMEOUT;
@@ -1154,17 +1166,6 @@
unsigned n_bios = 0;
unsigned nr_pages = (ds + PAGE_SIZE -1) >> PAGE_SHIFT;
- if (atomic_read(&mdev->new_c_uuid)) {
- if (atomic_add_unless(&mdev->new_c_uuid, -1, 1)) {
- drbd_uuid_new_current(mdev);
- drbd_md_sync(mdev);
-
- atomic_dec(&mdev->new_c_uuid);
- wake_up(&mdev->misc_wait);
- }
- wait_event(mdev->misc_wait, !atomic_read(&mdev->new_c_uuid));
- }
-
/* In most cases, we will only need one bio. But in case the lower
* level restrictions happen to be different at this offset on this
* side than those of the sending peer, we may need to submit the
diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c
index 3397f11..654f1ef 100644
--- a/drivers/block/drbd/drbd_req.c
+++ b/drivers/block/drbd/drbd_req.c
@@ -102,32 +102,7 @@
}
}
- /* if it was a local io error, we want to notify our
- * peer about that, and see if we need to
- * detach the disk and stuff.
- * to avoid allocating some special work
- * struct, reuse the request. */
-
- /* THINK
- * why do we do this not when we detect the error,
- * but delay it until it is "done", i.e. possibly
- * until the next barrier ack? */
-
- if (rw == WRITE &&
- ((s & RQ_LOCAL_MASK) && !(s & RQ_LOCAL_OK))) {
- if (!(req->w.list.next == LIST_POISON1 ||
- list_empty(&req->w.list))) {
- /* DEBUG ASSERT only; if this triggers, we
- * probably corrupt the worker list here */
- dev_err(DEV, "req->w.list.next = %p\n", req->w.list.next);
- dev_err(DEV, "req->w.list.prev = %p\n", req->w.list.prev);
- }
- req->w.cb = w_io_error;
- drbd_queue_work(&mdev->data.work, &req->w);
- /* drbd_req_free() is done in w_io_error */
- } else {
- drbd_req_free(req);
- }
+ drbd_req_free(req);
}
static void queue_barrier(struct drbd_conf *mdev)
@@ -453,9 +428,6 @@
req->rq_state |= RQ_LOCAL_COMPLETED;
req->rq_state &= ~RQ_LOCAL_PENDING;
- dev_alert(DEV, "Local WRITE failed sec=%llus size=%u\n",
- (unsigned long long)req->sector, req->size);
- /* and now: check how to handle local io error. */
__drbd_chk_io_error(mdev, FALSE);
_req_may_be_done(req, m);
put_ldev(mdev);
@@ -475,22 +447,21 @@
req->rq_state |= RQ_LOCAL_COMPLETED;
req->rq_state &= ~RQ_LOCAL_PENDING;
- dev_alert(DEV, "Local READ failed sec=%llus size=%u\n",
- (unsigned long long)req->sector, req->size);
- /* _req_mod(req,to_be_send); oops, recursion... */
D_ASSERT(!(req->rq_state & RQ_NET_MASK));
- req->rq_state |= RQ_NET_PENDING;
- inc_ap_pending(mdev);
__drbd_chk_io_error(mdev, FALSE);
put_ldev(mdev);
- /* NOTE: if we have no connection,
- * or know the peer has no good data either,
- * then we don't actually need to "queue_for_net_read",
- * but we do so anyways, since the drbd_io_error()
- * and the potential state change to "Diskless"
- * needs to be done from process context */
+ /* no point in retrying if there is no good remote data,
+ * or we have no connection. */
+ if (mdev->state.pdsk != D_UP_TO_DATE) {
+ _req_may_be_done(req, m);
+ break;
+ }
+
+ /* _req_mod(req,to_be_send); oops, recursion... */
+ req->rq_state |= RQ_NET_PENDING;
+ inc_ap_pending(mdev);
/* fall through: _req_mod(req,queue_for_net_read); */
case queue_for_net_read:
@@ -600,6 +571,9 @@
_req_may_be_done(req, m);
break;
+ case read_retry_remote_canceled:
+ req->rq_state &= ~RQ_NET_QUEUED;
+ /* fall through, in case we raced with drbd_disconnect */
case connection_lost_while_pending:
/* transfer log cleanup after connection loss */
/* assert something? */
diff --git a/drivers/block/drbd/drbd_req.h b/drivers/block/drbd/drbd_req.h
index 16119d7..02d575d 100644
--- a/drivers/block/drbd/drbd_req.h
+++ b/drivers/block/drbd/drbd_req.h
@@ -91,6 +91,7 @@
send_failed,
handed_over_to_network,
connection_lost_while_pending,
+ read_retry_remote_canceled,
recv_acked_by_peer,
write_acked_by_peer,
write_acked_by_peer_and_sis, /* and set_in_sync */
diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c
index 727ff63..b623cee 100644
--- a/drivers/block/drbd/drbd_worker.c
+++ b/drivers/block/drbd/drbd_worker.c
@@ -224,9 +224,6 @@
enum drbd_req_event what;
int uptodate = bio_flagged(bio, BIO_UPTODATE);
- if (error)
- dev_warn(DEV, "p %s: error=%d\n",
- bio_data_dir(bio) == WRITE ? "write" : "read", error);
if (!error && !uptodate) {
dev_warn(DEV, "p %s: setting error to -EIO\n",
bio_data_dir(bio) == WRITE ? "write" : "read");
@@ -257,20 +254,6 @@
complete_master_bio(mdev, &m);
}
-int w_io_error(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
-{
- struct drbd_request *req = container_of(w, struct drbd_request, w);
-
- /* NOTE: mdev->ldev can be NULL by the time we get here! */
- /* D_ASSERT(mdev->ldev->dc.on_io_error != EP_PASS_ON); */
-
- /* the only way this callback is scheduled is from _req_may_be_done,
- * when it is done and had a local write error, see comments there */
- drbd_req_free(req);
-
- return TRUE;
-}
-
int w_read_retry_remote(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
{
struct drbd_request *req = container_of(w, struct drbd_request, w);
@@ -280,12 +263,9 @@
* to give the disk the chance to relocate that block */
spin_lock_irq(&mdev->req_lock);
- if (cancel ||
- mdev->state.conn < C_CONNECTED ||
- mdev->state.pdsk <= D_INCONSISTENT) {
- _req_mod(req, send_canceled);
+ if (cancel || mdev->state.pdsk != D_UP_TO_DATE) {
+ _req_mod(req, read_retry_remote_canceled);
spin_unlock_irq(&mdev->req_lock);
- dev_alert(DEV, "WE ARE LOST. Local IO failure, no peer.\n");
return 1;
}
spin_unlock_irq(&mdev->req_lock);
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index 52f2d11..ed6fb91 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -1159,8 +1159,10 @@
static struct macio_driver swim3_driver =
{
- .name = "swim3",
- .match_table = swim3_match,
+ .driver = {
+ .name = "swim3",
+ .of_match_table = swim3_match,
+ },
.probe = swim3_attach,
#if 0
.suspend = swim3_suspend,
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 83fa09a..258bc2a 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -298,7 +298,9 @@
err = virtio_config_val(vdev, VIRTIO_BLK_F_SEG_MAX,
offsetof(struct virtio_blk_config, seg_max),
&sg_elems);
- if (err)
+
+ /* We need at least one SG element, whatever they say. */
+ if (err || !sg_elems)
sg_elems = 1;
/* We need an extra sg elements at head and tail. */
diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c
index 6f907eb..6d34f40 100644
--- a/drivers/bluetooth/bluecard_cs.c
+++ b/drivers/bluetooth/bluecard_cs.c
@@ -37,7 +37,7 @@
#include <linux/wait.h>
#include <linux/skbuff.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
index 40aec0f..42d69d4 100644
--- a/drivers/bluetooth/hci_bcsp.c
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -244,7 +244,7 @@
if (rel) {
hdr[0] |= 0x80 + bcsp->msgq_txseq;
BT_DBG("Sending packet with seqno %u", bcsp->msgq_txseq);
- bcsp->msgq_txseq = ++(bcsp->msgq_txseq) & 0x07;
+ bcsp->msgq_txseq = (bcsp->msgq_txseq + 1) & 0x07;
}
if (bcsp->use_crc)
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index e21175b..7cfcc62 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -1121,5 +1121,13 @@
source "drivers/s390/char/Kconfig"
+config RAMOOPS
+ tristate "Log panic/oops to a RAM buffer"
+ depends on HAS_IOMEM
+ default n
+ help
+ This enables panic and oops messages to be logged to a circular
+ buffer in RAM where it can be read back at some later point.
+
endmenu
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index d39be4c..88d6eac 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -108,6 +108,7 @@
obj-$(CONFIG_TCG_TPM) += tpm/
obj-$(CONFIG_PS3_FLASH) += ps3flash.o
+obj-$(CONFIG_RAMOOPS) += ramoops.o
obj-$(CONFIG_JS_RTC) += js-rtc.o
js-rtc-y = rtc.o
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 67ea3a6..70312da 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -384,7 +384,7 @@
{
u32 httfea,baseaddr,enuscr;
struct pci_dev *dev1;
- int i;
+ int i, ret;
unsigned size = amd64_fetch_size();
dev_info(&pdev->dev, "setting up ULi AGP\n");
@@ -400,15 +400,18 @@
if (i == ARRAY_SIZE(uli_sizes)) {
dev_info(&pdev->dev, "no ULi size found for %d\n", size);
- return -ENODEV;
+ ret = -ENODEV;
+ goto put;
}
/* shadow x86-64 registers into ULi registers */
pci_read_config_dword (k8_northbridges[0], AMD64_GARTAPERTUREBASE, &httfea);
/* if x86-64 aperture base is beyond 4G, exit here */
- if ((httfea & 0x7fff) >> (32 - 25))
- return -ENODEV;
+ if ((httfea & 0x7fff) >> (32 - 25)) {
+ ret = -ENODEV;
+ goto put;
+ }
httfea = (httfea& 0x7fff) << 25;
@@ -420,9 +423,10 @@
enuscr= httfea+ (size * 1024 * 1024) - 1;
pci_write_config_dword(dev1, ULI_X86_64_HTT_FEA_REG, httfea);
pci_write_config_dword(dev1, ULI_X86_64_ENU_SCR_REG, enuscr);
-
+ ret = 0;
+put:
pci_dev_put(dev1);
- return 0;
+ return ret;
}
@@ -441,7 +445,7 @@
{
u32 tmp, apbase, apbar, aplimit;
struct pci_dev *dev1;
- int i;
+ int i, ret;
unsigned size = amd64_fetch_size();
dev_info(&pdev->dev, "setting up Nforce3 AGP\n");
@@ -458,7 +462,8 @@
if (i == ARRAY_SIZE(nforce3_sizes)) {
dev_info(&pdev->dev, "no NForce3 size found for %d\n", size);
- return -ENODEV;
+ ret = -ENODEV;
+ goto put;
}
pci_read_config_dword(dev1, NVIDIA_X86_64_1_APSIZE, &tmp);
@@ -472,7 +477,8 @@
/* if x86-64 aperture base is beyond 4G, exit here */
if ( (apbase & 0x7fff) >> (32 - 25) ) {
dev_info(&pdev->dev, "aperture base > 4G\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto put;
}
apbase = (apbase & 0x7fff) << 25;
@@ -488,9 +494,11 @@
pci_write_config_dword(dev1, NVIDIA_X86_64_1_APBASE2, apbase);
pci_write_config_dword(dev1, NVIDIA_X86_64_1_APLIMIT2, aplimit);
+ ret = 0;
+put:
pci_dev_put(dev1);
- return 0;
+ return ret;
}
static int __devinit agp_amd64_probe(struct pci_dev *pdev,
diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index 4b51982..d2abf51 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -97,20 +97,18 @@
void agp_alloc_page_array(size_t size, struct agp_memory *mem)
{
mem->pages = NULL;
- mem->vmalloc_flag = false;
if (size <= 2*PAGE_SIZE)
- mem->pages = kmalloc(size, GFP_KERNEL | __GFP_NORETRY);
+ mem->pages = kmalloc(size, GFP_KERNEL | __GFP_NOWARN);
if (mem->pages == NULL) {
mem->pages = vmalloc(size);
- mem->vmalloc_flag = true;
}
}
EXPORT_SYMBOL(agp_alloc_page_array);
void agp_free_page_array(struct agp_memory *mem)
{
- if (mem->vmalloc_flag) {
+ if (is_vmalloc_addr(mem->pages)) {
vfree(mem->pages);
} else {
kfree(mem->pages);
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index e8ea682..9344216 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -1059,7 +1059,7 @@
}
}
-static int intel_i915_configure(void)
+static int intel_i9xx_configure(void)
{
struct aper_size_info_fixed *current_size;
u32 temp;
@@ -1207,6 +1207,38 @@
return 0;
}
+static int intel_i915_get_gtt_size(void)
+{
+ int size;
+
+ if (IS_G33) {
+ u16 gmch_ctrl;
+
+ /* G33's GTT size defined in gmch_ctrl */
+ pci_read_config_word(agp_bridge->dev, I830_GMCH_CTRL, &gmch_ctrl);
+ switch (gmch_ctrl & G33_PGETBL_SIZE_MASK) {
+ case G33_PGETBL_SIZE_1M:
+ size = 1024;
+ break;
+ case G33_PGETBL_SIZE_2M:
+ size = 2048;
+ break;
+ default:
+ dev_info(&agp_bridge->dev->dev,
+ "unknown page table size 0x%x, assuming 512KB\n",
+ (gmch_ctrl & G33_PGETBL_SIZE_MASK));
+ size = 512;
+ }
+ } else {
+ /* On previous hardware, the GTT size was just what was
+ * required to map the aperture.
+ */
+ size = agp_bridge->driver->fetch_size();
+ }
+
+ return KB(size);
+}
+
/* The intel i915 automatically initializes the agp aperture during POST.
* Use the memory already set aside for in the GTT.
*/
@@ -1216,7 +1248,7 @@
struct aper_size_info_fixed *size;
int num_entries;
u32 temp, temp2;
- int gtt_map_size = 256 * 1024;
+ int gtt_map_size;
size = agp_bridge->current_size;
page_order = size->page_order;
@@ -1226,8 +1258,8 @@
pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp);
pci_read_config_dword(intel_private.pcidev, I915_PTEADDR, &temp2);
- if (IS_G33)
- gtt_map_size = 1024 * 1024; /* 1M on G33 */
+ gtt_map_size = intel_i915_get_gtt_size();
+
intel_private.gtt = ioremap(temp2, gtt_map_size);
if (!intel_private.gtt)
return -ENOMEM;
@@ -1422,7 +1454,7 @@
.size_type = FIXED_APER_SIZE,
.num_aperture_sizes = 4,
.needs_scratch_page = true,
- .configure = intel_i915_configure,
+ .configure = intel_i9xx_configure,
.fetch_size = intel_i9xx_fetch_size,
.cleanup = intel_i915_cleanup,
.mask_memory = intel_i810_mask_memory,
@@ -1455,7 +1487,7 @@
.size_type = FIXED_APER_SIZE,
.num_aperture_sizes = 4,
.needs_scratch_page = true,
- .configure = intel_i915_configure,
+ .configure = intel_i9xx_configure,
.fetch_size = intel_i9xx_fetch_size,
.cleanup = intel_i915_cleanup,
.mask_memory = intel_i965_mask_memory,
@@ -1488,7 +1520,7 @@
.size_type = FIXED_APER_SIZE,
.num_aperture_sizes = 4,
.needs_scratch_page = true,
- .configure = intel_i915_configure,
+ .configure = intel_i9xx_configure,
.fetch_size = intel_i9xx_fetch_size,
.cleanup = intel_i915_cleanup,
.mask_memory = intel_i965_mask_memory,
diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c
index 95db713..f845a8f 100644
--- a/drivers/char/agp/uninorth-agp.c
+++ b/drivers/char/agp/uninorth-agp.c
@@ -415,7 +415,7 @@
bridge->gatt_table_real = (u32 *) table;
/* Need to clear out any dirty data still sitting in caches */
flush_dcache_range((unsigned long)table,
- (unsigned long)(table_end + PAGE_SIZE));
+ (unsigned long)table_end + 1);
bridge->gatt_table = vmap(pages, (1 << page_order), 0, PAGE_KERNEL_NCG);
if (bridge->gatt_table == NULL)
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index 56b2767..4f8d60c 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -84,6 +84,7 @@
#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/bitops.h>
+#include <linux/platform_device.h>
#include <asm/setup.h>
@@ -1954,29 +1955,16 @@
/*
* The serial driver boot-time initialization code!
*/
-static int __init rs_init(void)
+static int __init amiga_serial_probe(struct platform_device *pdev)
{
unsigned long flags;
struct serial_state * state;
int error;
- if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_SERIAL))
- return -ENODEV;
-
serial_driver = alloc_tty_driver(1);
if (!serial_driver)
return -ENOMEM;
- /*
- * We request SERDAT and SERPER only, because the serial registers are
- * too spreaded over the custom register space
- */
- if (!request_mem_region(CUSTOM_PHYSADDR+0x30, 4,
- "amiserial [Paula]")) {
- error = -EBUSY;
- goto fail_put_tty_driver;
- }
-
IRQ_ports = NULL;
show_serial_version();
@@ -1998,7 +1986,7 @@
error = tty_register_driver(serial_driver);
if (error)
- goto fail_release_mem_region;
+ goto fail_put_tty_driver;
state = rs_table;
state->magic = SSTATE_MAGIC;
@@ -2050,23 +2038,24 @@
ciab.ddra |= (SER_DTR | SER_RTS); /* outputs */
ciab.ddra &= ~(SER_DCD | SER_CTS | SER_DSR); /* inputs */
+ platform_set_drvdata(pdev, state);
+
return 0;
fail_free_irq:
free_irq(IRQ_AMIGA_TBE, state);
fail_unregister:
tty_unregister_driver(serial_driver);
-fail_release_mem_region:
- release_mem_region(CUSTOM_PHYSADDR+0x30, 4);
fail_put_tty_driver:
put_tty_driver(serial_driver);
return error;
}
-static __exit void rs_exit(void)
+static int __exit amiga_serial_remove(struct platform_device *pdev)
{
int error;
- struct async_struct *info = rs_table[0].info;
+ struct serial_state *state = platform_get_drvdata(pdev);
+ struct async_struct *info = state->info;
/* printk("Unloading %s: version %s\n", serial_name, serial_version); */
tasklet_kill(&info->tlet);
@@ -2075,19 +2064,38 @@
error);
put_tty_driver(serial_driver);
- if (info) {
- rs_table[0].info = NULL;
- kfree(info);
- }
+ rs_table[0].info = NULL;
+ kfree(info);
free_irq(IRQ_AMIGA_TBE, rs_table);
free_irq(IRQ_AMIGA_RBF, rs_table);
- release_mem_region(CUSTOM_PHYSADDR+0x30, 4);
+ platform_set_drvdata(pdev, NULL);
+
+ return error;
}
-module_init(rs_init)
-module_exit(rs_exit)
+static struct platform_driver amiga_serial_driver = {
+ .remove = __exit_p(amiga_serial_remove),
+ .driver = {
+ .name = "amiga-serial",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init amiga_serial_init(void)
+{
+ return platform_driver_probe(&amiga_serial_driver, amiga_serial_probe);
+}
+
+module_init(amiga_serial_init);
+
+static void __exit amiga_serial_exit(void)
+{
+ platform_driver_unregister(&amiga_serial_driver);
+}
+
+module_exit(amiga_serial_exit);
#if defined(CONFIG_SERIAL_CONSOLE) && !defined(MODULE)
@@ -2154,3 +2162,4 @@
#endif /* CONFIG_SERIAL_CONSOLE && !MODULE */
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:amiga-serial");
diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c
index 63313a3..f4ae0e0 100644
--- a/drivers/char/applicom.c
+++ b/drivers/char/applicom.c
@@ -703,14 +703,9 @@
/* In general, the device is only openable by root anyway, so we're not
particularly concerned that bogus ioctls can flood the console. */
- adgl = kmalloc(sizeof(struct st_ram_io), GFP_KERNEL);
- if (!adgl)
- return -ENOMEM;
-
- if (copy_from_user(adgl, argp, sizeof(struct st_ram_io))) {
- kfree(adgl);
- return -EFAULT;
- }
+ adgl = memdup_user(argp, sizeof(struct st_ram_io));
+ if (IS_ERR(adgl))
+ return PTR_ERR(adgl);
lock_kernel();
IndexCard = adgl->num_card-1;
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index c6ad423..4f3f8c9 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -2505,12 +2505,11 @@
return rv;
}
- printk(KERN_INFO
- "ipmi: Found new BMC (man_id: 0x%6.6x, "
- " prod_id: 0x%4.4x, dev_id: 0x%2.2x)\n",
- bmc->id.manufacturer_id,
- bmc->id.product_id,
- bmc->id.device_id);
+ dev_info(intf->si_dev, "Found new BMC (man_id: 0x%6.6x, "
+ "prod_id: 0x%4.4x, dev_id: 0x%2.2x)\n",
+ bmc->id.manufacturer_id,
+ bmc->id.product_id,
+ bmc->id.device_id);
}
/*
@@ -4037,8 +4036,8 @@
static struct timer_list ipmi_timer;
-/* Call every ~100 ms. */
-#define IPMI_TIMEOUT_TIME 100
+/* Call every ~1000 ms. */
+#define IPMI_TIMEOUT_TIME 1000
/* How many jiffies does it take to get to the timeout time. */
#define IPMI_TIMEOUT_JIFFIES ((IPMI_TIMEOUT_TIME * HZ) / 1000)
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 47ffe4a..094bdc3 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -107,6 +107,14 @@
};
static char *si_to_str[] = { "kcs", "smic", "bt" };
+enum ipmi_addr_src {
+ SI_INVALID = 0, SI_HOTMOD, SI_HARDCODED, SI_SPMI, SI_ACPI, SI_SMBIOS,
+ SI_PCI, SI_DEVICETREE, SI_DEFAULT
+};
+static char *ipmi_addr_src_to_str[] = { NULL, "hotmod", "hardcoded", "SPMI",
+ "ACPI", "SMBIOS", "PCI",
+ "device-tree", "default" };
+
#define DEVICE_NAME "ipmi_si"
static struct platform_driver ipmi_driver = {
@@ -188,7 +196,7 @@
int (*irq_setup)(struct smi_info *info);
void (*irq_cleanup)(struct smi_info *info);
unsigned int io_size;
- char *addr_source; /* ACPI, PCI, SMBIOS, hardcode, default. */
+ enum ipmi_addr_src addr_source; /* ACPI, PCI, SMBIOS, hardcode, etc. */
void (*addr_source_cleanup)(struct smi_info *info);
void *addr_source_data;
@@ -294,12 +302,19 @@
static int force_kipmid[SI_MAX_PARMS];
static int num_force_kipmid;
+#ifdef CONFIG_PCI
+static int pci_registered;
+#endif
+#ifdef CONFIG_PPC_OF
+static int of_registered;
+#endif
static unsigned int kipmid_max_busy_us[SI_MAX_PARMS];
static int num_max_busy_us;
static int unload_when_empty = 1;
+static int add_smi(struct smi_info *smi);
static int try_smi_init(struct smi_info *smi);
static void cleanup_one_si(struct smi_info *to_clean);
@@ -314,9 +329,14 @@
{
/* Deliver the message to the upper layer with the lock
released. */
- spin_unlock(&(smi_info->si_lock));
- ipmi_smi_msg_received(smi_info->intf, msg);
- spin_lock(&(smi_info->si_lock));
+
+ if (smi_info->run_to_completion) {
+ ipmi_smi_msg_received(smi_info->intf, msg);
+ } else {
+ spin_unlock(&(smi_info->si_lock));
+ ipmi_smi_msg_received(smi_info->intf, msg);
+ spin_lock(&(smi_info->si_lock));
+ }
}
static void return_hosed_msg(struct smi_info *smi_info, int cCode)
@@ -445,6 +465,9 @@
if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
start_disable_irq(smi_info);
smi_info->interrupt_disabled = 1;
+ if (!atomic_read(&smi_info->stop_operation))
+ mod_timer(&smi_info->si_timer,
+ jiffies + SI_TIMEOUT_JIFFIES);
}
}
@@ -576,9 +599,8 @@
smi_info->handlers->get_result(smi_info->si_sm, msg, 3);
if (msg[2] != 0) {
/* Error clearing flags */
- printk(KERN_WARNING
- "ipmi_si: Error clearing flags: %2.2x\n",
- msg[2]);
+ dev_warn(smi_info->dev,
+ "Error clearing flags: %2.2x\n", msg[2]);
}
if (smi_info->si_state == SI_CLEARING_FLAGS_THEN_SET_IRQ)
start_enable_irq(smi_info);
@@ -670,9 +692,8 @@
/* We got the flags from the SMI, now handle them. */
smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
if (msg[2] != 0) {
- printk(KERN_WARNING
- "ipmi_si: Could not enable interrupts"
- ", failed get, using polled mode.\n");
+ dev_warn(smi_info->dev, "Could not enable interrupts"
+ ", failed get, using polled mode.\n");
smi_info->si_state = SI_NORMAL;
} else {
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
@@ -693,11 +714,11 @@
/* We got the flags from the SMI, now handle them. */
smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
- if (msg[2] != 0) {
- printk(KERN_WARNING
- "ipmi_si: Could not enable interrupts"
- ", failed set, using polled mode.\n");
- }
+ if (msg[2] != 0)
+ dev_warn(smi_info->dev, "Could not enable interrupts"
+ ", failed set, using polled mode.\n");
+ else
+ smi_info->interrupt_disabled = 0;
smi_info->si_state = SI_NORMAL;
break;
}
@@ -709,9 +730,8 @@
/* We got the flags from the SMI, now handle them. */
smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
if (msg[2] != 0) {
- printk(KERN_WARNING
- "ipmi_si: Could not disable interrupts"
- ", failed get.\n");
+ dev_warn(smi_info->dev, "Could not disable interrupts"
+ ", failed get.\n");
smi_info->si_state = SI_NORMAL;
} else {
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
@@ -733,9 +753,8 @@
/* We got the flags from the SMI, now handle them. */
smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
if (msg[2] != 0) {
- printk(KERN_WARNING
- "ipmi_si: Could not disable interrupts"
- ", failed set.\n");
+ dev_warn(smi_info->dev, "Could not disable interrupts"
+ ", failed set.\n");
}
smi_info->si_state = SI_NORMAL;
break;
@@ -877,6 +896,11 @@
printk("**Enqueue: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
+ mod_timer(&smi_info->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
+
+ if (smi_info->thread)
+ wake_up_process(smi_info->thread);
+
if (smi_info->run_to_completion) {
/*
* If we are running to completion, then throw it in
@@ -997,8 +1021,10 @@
; /* do nothing */
else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)
schedule();
+ else if (smi_result == SI_SM_IDLE)
+ schedule_timeout_interruptible(100);
else
- schedule_timeout_interruptible(0);
+ schedule_timeout_interruptible(1);
}
return 0;
}
@@ -1039,6 +1065,7 @@
unsigned long flags;
unsigned long jiffies_now;
long time_diff;
+ long timeout;
#ifdef DEBUG_TIMING
struct timeval t;
#endif
@@ -1059,9 +1086,9 @@
if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
/* Running with interrupts, only do long timeouts. */
- smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES;
+ timeout = jiffies + SI_TIMEOUT_JIFFIES;
smi_inc_stat(smi_info, long_timeouts);
- goto do_add_timer;
+ goto do_mod_timer;
}
/*
@@ -1070,14 +1097,15 @@
*/
if (smi_result == SI_SM_CALL_WITH_DELAY) {
smi_inc_stat(smi_info, short_timeouts);
- smi_info->si_timer.expires = jiffies + 1;
+ timeout = jiffies + 1;
} else {
smi_inc_stat(smi_info, long_timeouts);
- smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES;
+ timeout = jiffies + SI_TIMEOUT_JIFFIES;
}
- do_add_timer:
- add_timer(&(smi_info->si_timer));
+ do_mod_timer:
+ if (smi_result != SI_SM_IDLE)
+ mod_timer(&(smi_info->si_timer), timeout);
}
static irqreturn_t si_irq_handler(int irq, void *data)
@@ -1144,10 +1172,10 @@
new_smi->thread = kthread_run(ipmi_thread, new_smi,
"kipmi%d", new_smi->intf_num);
if (IS_ERR(new_smi->thread)) {
- printk(KERN_NOTICE "ipmi_si_intf: Could not start"
- " kernel thread due to error %ld, only using"
- " timers to drive the interface\n",
- PTR_ERR(new_smi->thread));
+ dev_notice(new_smi->dev, "Could not start"
+ " kernel thread due to error %ld, only using"
+ " timers to drive the interface\n",
+ PTR_ERR(new_smi->thread));
new_smi->thread = NULL;
}
}
@@ -1308,14 +1336,13 @@
DEVICE_NAME,
info);
if (rv) {
- printk(KERN_WARNING
- "ipmi_si: %s unable to claim interrupt %d,"
- " running polled\n",
- DEVICE_NAME, info->irq);
+ dev_warn(info->dev, "%s unable to claim interrupt %d,"
+ " running polled\n",
+ DEVICE_NAME, info->irq);
info->irq = 0;
} else {
info->irq_cleanup = std_irq_cleanup;
- printk(" Using irq %d\n", info->irq);
+ dev_info(info->dev, "Using irq %d\n", info->irq);
}
return rv;
@@ -1406,8 +1433,8 @@
info->io.outputb = port_outl;
break;
default:
- printk(KERN_WARNING "ipmi_si: Invalid register size: %d\n",
- info->io.regsize);
+ dev_warn(info->dev, "Invalid register size: %d\n",
+ info->io.regsize);
return -EINVAL;
}
@@ -1529,8 +1556,8 @@
break;
#endif
default:
- printk(KERN_WARNING "ipmi_si: Invalid register size: %d\n",
- info->io.regsize);
+ dev_warn(info->dev, "Invalid register size: %d\n",
+ info->io.regsize);
return -EINVAL;
}
@@ -1755,7 +1782,7 @@
goto out;
}
- info->addr_source = "hotmod";
+ info->addr_source = SI_HOTMOD;
info->si_type = si_type;
info->io.addr_data = addr;
info->io.addr_type = addr_space;
@@ -1777,7 +1804,9 @@
info->irq_setup = std_irq_setup;
info->slave_addr = ipmb;
- try_smi_init(info);
+ if (!add_smi(info))
+ if (try_smi_init(info))
+ cleanup_one_si(info);
} else {
/* remove */
struct smi_info *e, *tmp_e;
@@ -1813,7 +1842,8 @@
if (!info)
return;
- info->addr_source = "hardcoded";
+ info->addr_source = SI_HARDCODED;
+ printk(KERN_INFO PFX "probing via hardcoded address\n");
if (!si_type[i] || strcmp(si_type[i], "kcs") == 0) {
info->si_type = SI_KCS;
@@ -1822,8 +1852,7 @@
} else if (strcmp(si_type[i], "bt") == 0) {
info->si_type = SI_BT;
} else {
- printk(KERN_WARNING
- "ipmi_si: Interface type specified "
+ printk(KERN_WARNING PFX "Interface type specified "
"for interface %d, was invalid: %s\n",
i, si_type[i]);
kfree(info);
@@ -1841,11 +1870,9 @@
info->io.addr_data = addrs[i];
info->io.addr_type = IPMI_MEM_ADDR_SPACE;
} else {
- printk(KERN_WARNING
- "ipmi_si: Interface type specified "
- "for interface %d, "
- "but port and address were not set or "
- "set to zero.\n", i);
+ printk(KERN_WARNING PFX "Interface type specified "
+ "for interface %d, but port and address were "
+ "not set or set to zero.\n", i);
kfree(info);
continue;
}
@@ -1863,7 +1890,9 @@
info->irq_setup = std_irq_setup;
info->slave_addr = slave_addrs[i];
- try_smi_init(info);
+ if (!add_smi(info))
+ if (try_smi_init(info))
+ cleanup_one_si(info);
}
}
@@ -1923,15 +1952,13 @@
&ipmi_acpi_gpe,
info);
if (status != AE_OK) {
- printk(KERN_WARNING
- "ipmi_si: %s unable to claim ACPI GPE %d,"
- " running polled\n",
- DEVICE_NAME, info->irq);
+ dev_warn(info->dev, "%s unable to claim ACPI GPE %d,"
+ " running polled\n", DEVICE_NAME, info->irq);
info->irq = 0;
return -EINVAL;
} else {
info->irq_cleanup = acpi_gpe_irq_cleanup;
- printk(" Using ACPI GPE %d\n", info->irq);
+ dev_info(info->dev, "Using ACPI GPE %d\n", info->irq);
return 0;
}
}
@@ -1989,8 +2016,8 @@
u8 addr_space;
if (spmi->IPMIlegacy != 1) {
- printk(KERN_INFO "IPMI: Bad SPMI legacy %d\n", spmi->IPMIlegacy);
- return -ENODEV;
+ printk(KERN_INFO PFX "Bad SPMI legacy %d\n", spmi->IPMIlegacy);
+ return -ENODEV;
}
if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
@@ -2000,11 +2027,12 @@
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info) {
- printk(KERN_ERR "ipmi_si: Could not allocate SI data (3)\n");
+ printk(KERN_ERR PFX "Could not allocate SI data (3)\n");
return -ENOMEM;
}
- info->addr_source = "SPMI";
+ info->addr_source = SI_SPMI;
+ printk(KERN_INFO PFX "probing via SPMI\n");
/* Figure out the interface type. */
switch (spmi->InterfaceType) {
@@ -2018,8 +2046,8 @@
info->si_type = SI_BT;
break;
default:
- printk(KERN_INFO "ipmi_si: Unknown ACPI/SPMI SI type %d\n",
- spmi->InterfaceType);
+ printk(KERN_INFO PFX "Unknown ACPI/SPMI SI type %d\n",
+ spmi->InterfaceType);
kfree(info);
return -EIO;
}
@@ -2055,13 +2083,12 @@
info->io.addr_type = IPMI_IO_ADDR_SPACE;
} else {
kfree(info);
- printk(KERN_WARNING
- "ipmi_si: Unknown ACPI I/O Address type\n");
+ printk(KERN_WARNING PFX "Unknown ACPI I/O Address type\n");
return -EIO;
}
info->io.addr_data = spmi->addr.address;
- try_smi_init(info);
+ add_smi(info);
return 0;
}
@@ -2093,6 +2120,7 @@
{
struct acpi_device *acpi_dev;
struct smi_info *info;
+ struct resource *res;
acpi_handle handle;
acpi_status status;
unsigned long long tmp;
@@ -2105,7 +2133,8 @@
if (!info)
return -ENOMEM;
- info->addr_source = "ACPI";
+ info->addr_source = SI_ACPI;
+ printk(KERN_INFO PFX "probing via ACPI\n");
handle = acpi_dev->handle;
@@ -2125,22 +2154,26 @@
info->si_type = SI_BT;
break;
default:
- dev_info(&dev->dev, "unknown interface type %lld\n", tmp);
+ dev_info(&dev->dev, "unknown IPMI type %lld\n", tmp);
goto err_free;
}
- if (pnp_port_valid(dev, 0)) {
+ res = pnp_get_resource(dev, IORESOURCE_IO, 0);
+ if (res) {
info->io_setup = port_setup;
info->io.addr_type = IPMI_IO_ADDR_SPACE;
- info->io.addr_data = pnp_port_start(dev, 0);
- } else if (pnp_mem_valid(dev, 0)) {
- info->io_setup = mem_setup;
- info->io.addr_type = IPMI_MEM_ADDR_SPACE;
- info->io.addr_data = pnp_mem_start(dev, 0);
} else {
+ res = pnp_get_resource(dev, IORESOURCE_MEM, 0);
+ if (res) {
+ info->io_setup = mem_setup;
+ info->io.addr_type = IPMI_MEM_ADDR_SPACE;
+ }
+ }
+ if (!res) {
dev_err(&dev->dev, "no I/O or memory address\n");
goto err_free;
}
+ info->io.addr_data = res->start;
info->io.regspacing = DEFAULT_REGSPACING;
info->io.regsize = DEFAULT_REGSPACING;
@@ -2156,10 +2189,14 @@
info->irq_setup = std_irq_setup;
}
- info->dev = &acpi_dev->dev;
+ info->dev = &dev->dev;
pnp_set_drvdata(dev, info);
- return try_smi_init(info);
+ dev_info(info->dev, "%pR regsize %d spacing %d irq %d\n",
+ res, info->io.regsize, info->io.regspacing,
+ info->irq);
+
+ return add_smi(info);
err_free:
kfree(info);
@@ -2264,12 +2301,12 @@
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info) {
- printk(KERN_ERR
- "ipmi_si: Could not allocate SI data\n");
+ printk(KERN_ERR PFX "Could not allocate SI data\n");
return;
}
- info->addr_source = "SMBIOS";
+ info->addr_source = SI_SMBIOS;
+ printk(KERN_INFO PFX "probing via SMBIOS\n");
switch (ipmi_data->type) {
case 0x01: /* KCS */
@@ -2299,8 +2336,7 @@
default:
kfree(info);
- printk(KERN_WARNING
- "ipmi_si: Unknown SMBIOS I/O Address type: %d.\n",
+ printk(KERN_WARNING PFX "Unknown SMBIOS I/O Address type: %d\n",
ipmi_data->addr_space);
return;
}
@@ -2318,7 +2354,7 @@
if (info->irq)
info->irq_setup = std_irq_setup;
- try_smi_init(info);
+ add_smi(info);
}
static void __devinit dmi_find_bmc(void)
@@ -2368,7 +2404,8 @@
if (!info)
return -ENOMEM;
- info->addr_source = "PCI";
+ info->addr_source = SI_PCI;
+ dev_info(&pdev->dev, "probing via PCI");
switch (class_type) {
case PCI_ERMC_CLASSCODE_TYPE_SMIC:
@@ -2385,15 +2422,13 @@
default:
kfree(info);
- printk(KERN_INFO "ipmi_si: %s: Unknown IPMI type: %d\n",
- pci_name(pdev), class_type);
+ dev_info(&pdev->dev, "Unknown IPMI type: %d\n", class_type);
return -ENOMEM;
}
rv = pci_enable_device(pdev);
if (rv) {
- printk(KERN_ERR "ipmi_si: %s: couldn't enable PCI device\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "couldn't enable PCI device\n");
kfree(info);
return rv;
}
@@ -2421,7 +2456,11 @@
info->dev = &pdev->dev;
pci_set_drvdata(pdev, info);
- return try_smi_init(info);
+ dev_info(&pdev->dev, "%pR regsize %d spacing %d irq %d\n",
+ &pdev->resource[0], info->io.regsize, info->io.regspacing,
+ info->irq);
+
+ return add_smi(info);
}
static void __devexit ipmi_pci_remove(struct pci_dev *pdev)
@@ -2473,7 +2512,7 @@
int ret;
int proplen;
- dev_info(&dev->dev, PFX "probing via device tree\n");
+ dev_info(&dev->dev, "probing via device tree\n");
ret = of_address_to_resource(np, 0, &resource);
if (ret) {
@@ -2503,12 +2542,12 @@
if (!info) {
dev_err(&dev->dev,
- PFX "could not allocate memory for OF probe\n");
+ "could not allocate memory for OF probe\n");
return -ENOMEM;
}
info->si_type = (enum si_type) match->data;
- info->addr_source = "device-tree";
+ info->addr_source = SI_DEVICETREE;
info->irq_setup = std_irq_setup;
if (resource.flags & IORESOURCE_IO) {
@@ -2528,13 +2567,13 @@
info->irq = irq_of_parse_and_map(dev->dev.of_node, 0);
info->dev = &dev->dev;
- dev_dbg(&dev->dev, "addr 0x%lx regsize %d spacing %d irq %x\n",
+ dev_dbg(&dev->dev, "addr 0x%lx regsize %d spacing %d irq %d\n",
info->io.addr_data, info->io.regsize, info->io.regspacing,
info->irq);
dev_set_drvdata(&dev->dev, info);
- return try_smi_init(info);
+ return add_smi(info);
}
static int __devexit ipmi_of_remove(struct of_device *dev)
@@ -2643,9 +2682,8 @@
rv = wait_for_msg_done(smi_info);
if (rv) {
- printk(KERN_WARNING
- "ipmi_si: Error getting response from get global,"
- " enables command, the event buffer is not"
+ printk(KERN_WARNING PFX "Error getting response from get"
+ " global enables command, the event buffer is not"
" enabled.\n");
goto out;
}
@@ -2657,10 +2695,8 @@
resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
resp[1] != IPMI_GET_BMC_GLOBAL_ENABLES_CMD ||
resp[2] != 0) {
- printk(KERN_WARNING
- "ipmi_si: Invalid return from get global"
- " enables command, cannot enable the event"
- " buffer.\n");
+ printk(KERN_WARNING PFX "Invalid return from get global"
+ " enables command, cannot enable the event buffer.\n");
rv = -EINVAL;
goto out;
}
@@ -2676,9 +2712,8 @@
rv = wait_for_msg_done(smi_info);
if (rv) {
- printk(KERN_WARNING
- "ipmi_si: Error getting response from set global,"
- " enables command, the event buffer is not"
+ printk(KERN_WARNING PFX "Error getting response from set"
+ " global, enables command, the event buffer is not"
" enabled.\n");
goto out;
}
@@ -2689,10 +2724,8 @@
if (resp_len < 3 ||
resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
resp[1] != IPMI_SET_BMC_GLOBAL_ENABLES_CMD) {
- printk(KERN_WARNING
- "ipmi_si: Invalid return from get global,"
- "enables command, not enable the event"
- " buffer.\n");
+ printk(KERN_WARNING PFX "Invalid return from get global,"
+ "enables command, not enable the event buffer.\n");
rv = -EINVAL;
goto out;
}
@@ -2951,7 +2984,7 @@
if (!info)
return;
- info->addr_source = NULL;
+ info->addr_source = SI_DEFAULT;
info->si_type = ipmi_defaults[i].type;
info->io_setup = port_setup;
@@ -2963,14 +2996,16 @@
info->io.regsize = DEFAULT_REGSPACING;
info->io.regshift = 0;
- if (try_smi_init(info) == 0) {
- /* Found one... */
- printk(KERN_INFO "ipmi_si: Found default %s state"
- " machine at %s address 0x%lx\n",
- si_to_str[info->si_type],
- addr_space_to_str[info->io.addr_type],
- info->io.addr_data);
- return;
+ if (add_smi(info) == 0) {
+ if ((try_smi_init(info)) == 0) {
+ /* Found one... */
+ printk(KERN_INFO PFX "Found default %s"
+ " state machine at %s address 0x%lx\n",
+ si_to_str[info->si_type],
+ addr_space_to_str[info->io.addr_type],
+ info->io.addr_data);
+ } else
+ cleanup_one_si(info);
}
}
}
@@ -2989,34 +3024,48 @@
return 1;
}
-static int try_smi_init(struct smi_info *new_smi)
+static int add_smi(struct smi_info *new_smi)
{
- int rv;
- int i;
+ int rv = 0;
- if (new_smi->addr_source) {
- printk(KERN_INFO "ipmi_si: Trying %s-specified %s state"
- " machine at %s address 0x%lx, slave address 0x%x,"
- " irq %d\n",
- new_smi->addr_source,
- si_to_str[new_smi->si_type],
- addr_space_to_str[new_smi->io.addr_type],
- new_smi->io.addr_data,
- new_smi->slave_addr, new_smi->irq);
- }
-
+ printk(KERN_INFO PFX "Adding %s-specified %s state machine",
+ ipmi_addr_src_to_str[new_smi->addr_source],
+ si_to_str[new_smi->si_type]);
mutex_lock(&smi_infos_lock);
if (!is_new_interface(new_smi)) {
- printk(KERN_WARNING "ipmi_si: duplicate interface\n");
+ printk(KERN_CONT PFX "duplicate interface\n");
rv = -EBUSY;
goto out_err;
}
+ printk(KERN_CONT "\n");
+
/* So we know not to free it unless we have allocated one. */
new_smi->intf = NULL;
new_smi->si_sm = NULL;
new_smi->handlers = NULL;
+ list_add_tail(&new_smi->link, &smi_infos);
+
+out_err:
+ mutex_unlock(&smi_infos_lock);
+ return rv;
+}
+
+static int try_smi_init(struct smi_info *new_smi)
+{
+ int rv = 0;
+ int i;
+
+ printk(KERN_INFO PFX "Trying %s-specified %s state"
+ " machine at %s address 0x%lx, slave address 0x%x,"
+ " irq %d\n",
+ ipmi_addr_src_to_str[new_smi->addr_source],
+ si_to_str[new_smi->si_type],
+ addr_space_to_str[new_smi->io.addr_type],
+ new_smi->io.addr_data,
+ new_smi->slave_addr, new_smi->irq);
+
switch (new_smi->si_type) {
case SI_KCS:
new_smi->handlers = &kcs_smi_handlers;
@@ -3039,7 +3088,8 @@
/* Allocate the state machine's data and initialize it. */
new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL);
if (!new_smi->si_sm) {
- printk(KERN_ERR "Could not allocate state machine memory\n");
+ printk(KERN_ERR PFX
+ "Could not allocate state machine memory\n");
rv = -ENOMEM;
goto out_err;
}
@@ -3049,7 +3099,7 @@
/* Now that we know the I/O size, we can set up the I/O. */
rv = new_smi->io_setup(new_smi);
if (rv) {
- printk(KERN_ERR "Could not set up I/O space\n");
+ printk(KERN_ERR PFX "Could not set up I/O space\n");
goto out_err;
}
@@ -3059,8 +3109,7 @@
/* Do low-level detection first. */
if (new_smi->handlers->detect(new_smi->si_sm)) {
if (new_smi->addr_source)
- printk(KERN_INFO "ipmi_si: Interface detection"
- " failed\n");
+ printk(KERN_INFO PFX "Interface detection failed\n");
rv = -ENODEV;
goto out_err;
}
@@ -3072,7 +3121,7 @@
rv = try_get_dev_id(new_smi);
if (rv) {
if (new_smi->addr_source)
- printk(KERN_INFO "ipmi_si: There appears to be no BMC"
+ printk(KERN_INFO PFX "There appears to be no BMC"
" at this location\n");
goto out_err;
}
@@ -3088,7 +3137,7 @@
for (i = 0; i < SI_NUM_STATS; i++)
atomic_set(&new_smi->stats[i], 0);
- new_smi->interrupt_disabled = 0;
+ new_smi->interrupt_disabled = 1;
atomic_set(&new_smi->stop_operation, 0);
new_smi->intf_num = smi_num;
smi_num++;
@@ -3114,9 +3163,8 @@
new_smi->pdev = platform_device_alloc("ipmi_si",
new_smi->intf_num);
if (!new_smi->pdev) {
- printk(KERN_ERR
- "ipmi_si_intf:"
- " Unable to allocate platform device\n");
+ printk(KERN_ERR PFX
+ "Unable to allocate platform device\n");
goto out_err;
}
new_smi->dev = &new_smi->pdev->dev;
@@ -3124,9 +3172,8 @@
rv = platform_device_add(new_smi->pdev);
if (rv) {
- printk(KERN_ERR
- "ipmi_si_intf:"
- " Unable to register system interface device:"
+ printk(KERN_ERR PFX
+ "Unable to register system interface device:"
" %d\n",
rv);
goto out_err;
@@ -3141,9 +3188,8 @@
"bmc",
new_smi->slave_addr);
if (rv) {
- printk(KERN_ERR
- "ipmi_si: Unable to register device: error %d\n",
- rv);
+ dev_err(new_smi->dev, "Unable to register device: error %d\n",
+ rv);
goto out_err_stop_timer;
}
@@ -3151,9 +3197,7 @@
type_file_read_proc,
new_smi);
if (rv) {
- printk(KERN_ERR
- "ipmi_si: Unable to create proc entry: %d\n",
- rv);
+ dev_err(new_smi->dev, "Unable to create proc entry: %d\n", rv);
goto out_err_stop_timer;
}
@@ -3161,9 +3205,7 @@
stat_file_read_proc,
new_smi);
if (rv) {
- printk(KERN_ERR
- "ipmi_si: Unable to create proc entry: %d\n",
- rv);
+ dev_err(new_smi->dev, "Unable to create proc entry: %d\n", rv);
goto out_err_stop_timer;
}
@@ -3171,18 +3213,12 @@
param_read_proc,
new_smi);
if (rv) {
- printk(KERN_ERR
- "ipmi_si: Unable to create proc entry: %d\n",
- rv);
+ dev_err(new_smi->dev, "Unable to create proc entry: %d\n", rv);
goto out_err_stop_timer;
}
- list_add_tail(&new_smi->link, &smi_infos);
-
- mutex_unlock(&smi_infos_lock);
-
- printk(KERN_INFO "IPMI %s interface initialized\n",
- si_to_str[new_smi->si_type]);
+ dev_info(new_smi->dev, "IPMI %s interface initialized\n",
+ si_to_str[new_smi->si_type]);
return 0;
@@ -3191,11 +3227,17 @@
wait_for_timer_and_thread(new_smi);
out_err:
- if (new_smi->intf)
- ipmi_unregister_smi(new_smi->intf);
+ new_smi->interrupt_disabled = 1;
- if (new_smi->irq_cleanup)
+ if (new_smi->intf) {
+ ipmi_unregister_smi(new_smi->intf);
+ new_smi->intf = NULL;
+ }
+
+ if (new_smi->irq_cleanup) {
new_smi->irq_cleanup(new_smi);
+ new_smi->irq_cleanup = NULL;
+ }
/*
* Wait until we know that we are out of any interrupt
@@ -3208,18 +3250,21 @@
if (new_smi->handlers)
new_smi->handlers->cleanup(new_smi->si_sm);
kfree(new_smi->si_sm);
+ new_smi->si_sm = NULL;
}
- if (new_smi->addr_source_cleanup)
+ if (new_smi->addr_source_cleanup) {
new_smi->addr_source_cleanup(new_smi);
- if (new_smi->io_cleanup)
+ new_smi->addr_source_cleanup = NULL;
+ }
+ if (new_smi->io_cleanup) {
new_smi->io_cleanup(new_smi);
+ new_smi->io_cleanup = NULL;
+ }
- if (new_smi->dev_registered)
+ if (new_smi->dev_registered) {
platform_device_unregister(new_smi->pdev);
-
- kfree(new_smi);
-
- mutex_unlock(&smi_infos_lock);
+ new_smi->dev_registered = 0;
+ }
return rv;
}
@@ -3229,6 +3274,8 @@
int i;
char *str;
int rv;
+ struct smi_info *e;
+ enum ipmi_addr_src type = SI_INVALID;
if (initialized)
return 0;
@@ -3237,9 +3284,7 @@
/* Register the device drivers. */
rv = driver_register(&ipmi_driver.driver);
if (rv) {
- printk(KERN_ERR
- "init_ipmi_si: Unable to register driver: %d\n",
- rv);
+ printk(KERN_ERR PFX "Unable to register driver: %d\n", rv);
return rv;
}
@@ -3263,6 +3308,26 @@
hardcode_find_bmc();
+ /* If the user gave us a device, they presumably want us to use it */
+ mutex_lock(&smi_infos_lock);
+ if (!list_empty(&smi_infos)) {
+ mutex_unlock(&smi_infos_lock);
+ return 0;
+ }
+ mutex_unlock(&smi_infos_lock);
+
+#ifdef CONFIG_PCI
+ rv = pci_register_driver(&ipmi_pci_driver);
+ if (rv)
+ printk(KERN_ERR PFX "Unable to register PCI driver: %d\n", rv);
+ else
+ pci_registered = 1;
+#endif
+
+#ifdef CONFIG_ACPI
+ pnp_register_driver(&ipmi_pnp_driver);
+#endif
+
#ifdef CONFIG_DMI
dmi_find_bmc();
#endif
@@ -3270,46 +3335,74 @@
#ifdef CONFIG_ACPI
spmi_find_bmc();
#endif
-#ifdef CONFIG_ACPI
- pnp_register_driver(&ipmi_pnp_driver);
-#endif
-
-#ifdef CONFIG_PCI
- rv = pci_register_driver(&ipmi_pci_driver);
- if (rv)
- printk(KERN_ERR
- "init_ipmi_si: Unable to register PCI driver: %d\n",
- rv);
-#endif
#ifdef CONFIG_PPC_OF
of_register_platform_driver(&ipmi_of_platform_driver);
+ of_registered = 1;
#endif
+ /* We prefer devices with interrupts, but in the case of a machine
+ with multiple BMCs we assume that there will be several instances
+ of a given type so if we succeed in registering a type then also
+ try to register everything else of the same type */
+
+ mutex_lock(&smi_infos_lock);
+ list_for_each_entry(e, &smi_infos, link) {
+ /* Try to register a device if it has an IRQ and we either
+ haven't successfully registered a device yet or this
+ device has the same type as one we successfully registered */
+ if (e->irq && (!type || e->addr_source == type)) {
+ if (!try_smi_init(e)) {
+ type = e->addr_source;
+ }
+ }
+ }
+
+ /* type will only have been set if we successfully registered an si */
+ if (type) {
+ mutex_unlock(&smi_infos_lock);
+ return 0;
+ }
+
+ /* Fall back to the preferred device */
+
+ list_for_each_entry(e, &smi_infos, link) {
+ if (!e->irq && (!type || e->addr_source == type)) {
+ if (!try_smi_init(e)) {
+ type = e->addr_source;
+ }
+ }
+ }
+ mutex_unlock(&smi_infos_lock);
+
+ if (type)
+ return 0;
+
if (si_trydefaults) {
mutex_lock(&smi_infos_lock);
if (list_empty(&smi_infos)) {
/* No BMC was found, try defaults. */
mutex_unlock(&smi_infos_lock);
default_find_bmc();
- } else {
+ } else
mutex_unlock(&smi_infos_lock);
- }
}
mutex_lock(&smi_infos_lock);
if (unload_when_empty && list_empty(&smi_infos)) {
mutex_unlock(&smi_infos_lock);
#ifdef CONFIG_PCI
- pci_unregister_driver(&ipmi_pci_driver);
+ if (pci_registered)
+ pci_unregister_driver(&ipmi_pci_driver);
#endif
#ifdef CONFIG_PPC_OF
- of_unregister_platform_driver(&ipmi_of_platform_driver);
+ if (of_registered)
+ of_unregister_platform_driver(&ipmi_of_platform_driver);
#endif
driver_unregister(&ipmi_driver.driver);
- printk(KERN_WARNING
- "ipmi_si: Unable to find any System Interface(s)\n");
+ printk(KERN_WARNING PFX
+ "Unable to find any System Interface(s)\n");
return -ENODEV;
} else {
mutex_unlock(&smi_infos_lock);
@@ -3320,7 +3413,7 @@
static void cleanup_one_si(struct smi_info *to_clean)
{
- int rv;
+ int rv = 0;
unsigned long flags;
if (!to_clean)
@@ -3364,14 +3457,16 @@
schedule_timeout_uninterruptible(1);
}
- rv = ipmi_unregister_smi(to_clean->intf);
+ if (to_clean->intf)
+ rv = ipmi_unregister_smi(to_clean->intf);
+
if (rv) {
- printk(KERN_ERR
- "ipmi_si: Unable to unregister device: errno=%d\n",
+ printk(KERN_ERR PFX "Unable to unregister device: errno=%d\n",
rv);
}
- to_clean->handlers->cleanup(to_clean->si_sm);
+ if (to_clean->handlers)
+ to_clean->handlers->cleanup(to_clean->si_sm);
kfree(to_clean->si_sm);
@@ -3394,14 +3489,16 @@
return;
#ifdef CONFIG_PCI
- pci_unregister_driver(&ipmi_pci_driver);
+ if (pci_registered)
+ pci_unregister_driver(&ipmi_pci_driver);
#endif
#ifdef CONFIG_ACPI
pnp_unregister_driver(&ipmi_pnp_driver);
#endif
#ifdef CONFIG_PPC_OF
- of_unregister_platform_driver(&ipmi_of_platform_driver);
+ if (of_registered)
+ of_unregister_platform_driver(&ipmi_of_platform_driver);
#endif
mutex_lock(&smi_infos_lock);
diff --git a/drivers/char/n_gsm.c b/drivers/char/n_gsm.c
index c4161d5..e4089c4 100644
--- a/drivers/char/n_gsm.c
+++ b/drivers/char/n_gsm.c
@@ -904,9 +904,7 @@
int len;
/* Priority ordering: We should do priority with RR of the groups */
int i = 1;
- unsigned long flags;
- spin_lock_irqsave(&gsm->tx_lock, flags);
while (i < NUM_DLCI) {
struct gsm_dlci *dlci;
@@ -927,7 +925,6 @@
if (len == 0)
i++;
}
- spin_unlock_irqrestore(&gsm->tx_lock, flags);
}
/**
@@ -2230,12 +2227,16 @@
static void gsmld_write_wakeup(struct tty_struct *tty)
{
struct gsm_mux *gsm = tty->disc_data;
+ unsigned long flags;
/* Queue poll */
clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
gsm_data_kick(gsm);
- if (gsm->tx_bytes < TX_THRESH_LO)
+ if (gsm->tx_bytes < TX_THRESH_LO) {
+ spin_lock_irqsave(&gsm->tx_lock, flags);
gsm_dlci_data_sweep(gsm);
+ spin_unlock_irqrestore(&gsm->tx_lock, flags);
+ }
}
/**
diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c
index fdd3754..02abfdd 100644
--- a/drivers/char/ppdev.c
+++ b/drivers/char/ppdev.c
@@ -287,12 +287,10 @@
char *name;
int fl;
- name = kmalloc (strlen (CHRDEV) + 3, GFP_KERNEL);
+ name = kasprintf(GFP_KERNEL, CHRDEV "%x", minor);
if (name == NULL)
return -ENOMEM;
- sprintf (name, CHRDEV "%x", minor);
-
port = parport_find_number (minor);
if (!port) {
printk (KERN_WARNING "%s: no associated port!\n", name);
diff --git a/drivers/char/ps3flash.c b/drivers/char/ps3flash.c
index 606048b..85c004a 100644
--- a/drivers/char/ps3flash.c
+++ b/drivers/char/ps3flash.c
@@ -305,8 +305,7 @@
return ps3flash_writeback(ps3flash_dev);
}
-static int ps3flash_fsync(struct file *file, struct dentry *dentry,
- int datasync)
+static int ps3flash_fsync(struct file *file, int datasync)
{
return ps3flash_writeback(ps3flash_dev);
}
diff --git a/drivers/char/ramoops.c b/drivers/char/ramoops.c
new file mode 100644
index 0000000..74f00b5
--- /dev/null
+++ b/drivers/char/ramoops.c
@@ -0,0 +1,162 @@
+/*
+ * RAM Oops/Panic logger
+ *
+ * Copyright (C) 2010 Marco Stornelli <marco.stornelli@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/kmsg_dump.h>
+#include <linux/time.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+
+#define RAMOOPS_KERNMSG_HDR "===="
+#define RAMOOPS_HEADER_SIZE (5 + sizeof(struct timeval))
+
+#define RECORD_SIZE 4096
+
+static ulong mem_address;
+module_param(mem_address, ulong, 0400);
+MODULE_PARM_DESC(mem_address,
+ "start of reserved RAM used to store oops/panic logs");
+
+static ulong mem_size;
+module_param(mem_size, ulong, 0400);
+MODULE_PARM_DESC(mem_size,
+ "size of reserved RAM used to store oops/panic logs");
+
+static int dump_oops = 1;
+module_param(dump_oops, int, 0600);
+MODULE_PARM_DESC(dump_oops,
+ "set to 1 to dump oopses, 0 to only dump panics (default 1)");
+
+static struct ramoops_context {
+ struct kmsg_dumper dump;
+ void *virt_addr;
+ phys_addr_t phys_addr;
+ unsigned long size;
+ int count;
+ int max_count;
+} oops_cxt;
+
+static void ramoops_do_dump(struct kmsg_dumper *dumper,
+ enum kmsg_dump_reason reason, const char *s1, unsigned long l1,
+ const char *s2, unsigned long l2)
+{
+ struct ramoops_context *cxt = container_of(dumper,
+ struct ramoops_context, dump);
+ unsigned long s1_start, s2_start;
+ unsigned long l1_cpy, l2_cpy;
+ int res;
+ char *buf;
+ struct timeval timestamp;
+
+ /* Only dump oopses if dump_oops is set */
+ if (reason == KMSG_DUMP_OOPS && !dump_oops)
+ return;
+
+ buf = (char *)(cxt->virt_addr + (cxt->count * RECORD_SIZE));
+ memset(buf, '\0', RECORD_SIZE);
+ res = sprintf(buf, "%s", RAMOOPS_KERNMSG_HDR);
+ buf += res;
+ do_gettimeofday(×tamp);
+ res = sprintf(buf, "%lu.%lu\n", (long)timestamp.tv_sec, (long)timestamp.tv_usec);
+ buf += res;
+
+ l2_cpy = min(l2, (unsigned long)(RECORD_SIZE - RAMOOPS_HEADER_SIZE));
+ l1_cpy = min(l1, (unsigned long)(RECORD_SIZE - RAMOOPS_HEADER_SIZE) - l2_cpy);
+
+ s2_start = l2 - l2_cpy;
+ s1_start = l1 - l1_cpy;
+
+ memcpy(buf, s1 + s1_start, l1_cpy);
+ memcpy(buf + l1_cpy, s2 + s2_start, l2_cpy);
+
+ cxt->count = (cxt->count + 1) % cxt->max_count;
+}
+
+static int __init ramoops_init(void)
+{
+ struct ramoops_context *cxt = &oops_cxt;
+ int err = -EINVAL;
+
+ if (!mem_size) {
+ printk(KERN_ERR "ramoops: invalid size specification");
+ goto fail3;
+ }
+
+ rounddown_pow_of_two(mem_size);
+
+ if (mem_size < RECORD_SIZE) {
+ printk(KERN_ERR "ramoops: size too small");
+ goto fail3;
+ }
+
+ cxt->max_count = mem_size / RECORD_SIZE;
+ cxt->count = 0;
+ cxt->size = mem_size;
+ cxt->phys_addr = mem_address;
+
+ if (!request_mem_region(cxt->phys_addr, cxt->size, "ramoops")) {
+ printk(KERN_ERR "ramoops: request mem region failed");
+ err = -EINVAL;
+ goto fail3;
+ }
+
+ cxt->virt_addr = ioremap(cxt->phys_addr, cxt->size);
+ if (!cxt->virt_addr) {
+ printk(KERN_ERR "ramoops: ioremap failed");
+ goto fail2;
+ }
+
+ cxt->dump.dump = ramoops_do_dump;
+ err = kmsg_dump_register(&cxt->dump);
+ if (err) {
+ printk(KERN_ERR "ramoops: registering kmsg dumper failed");
+ goto fail1;
+ }
+
+ return 0;
+
+fail1:
+ iounmap(cxt->virt_addr);
+fail2:
+ release_mem_region(cxt->phys_addr, cxt->size);
+fail3:
+ return err;
+}
+
+static void __exit ramoops_exit(void)
+{
+ struct ramoops_context *cxt = &oops_cxt;
+
+ if (kmsg_dump_unregister(&cxt->dump) < 0)
+ printk(KERN_WARNING "ramoops: could not unregister kmsg_dumper");
+
+ iounmap(cxt->virt_addr);
+ release_mem_region(cxt->phys_addr, cxt->size);
+}
+
+
+module_init(ramoops_init);
+module_exit(ramoops_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marco Stornelli <marco.stornelli@gmail.com>");
+MODULE_DESCRIPTION("RAM Oops/Panic logger/driver");
diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index 5d15630..878ac0c 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -493,7 +493,7 @@
sysrq_key_table[i] = op_p;
}
-static void __handle_sysrq(int key, struct tty_struct *tty, int check_mask)
+void __handle_sysrq(int key, struct tty_struct *tty, int check_mask)
{
struct sysrq_key_op *op_p;
int orig_log_level;
@@ -580,8 +580,12 @@
case KEY_RIGHTALT:
if (value)
sysrq_alt = code;
- else if (sysrq_down && code == sysrq_alt_use)
- sysrq_down = false;
+ else {
+ if (sysrq_down && code == sysrq_alt_use)
+ sysrq_down = false;
+
+ sysrq_alt = 0;
+ }
break;
case KEY_SYSRQ:
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 8e00b4d..792868d 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -224,6 +224,7 @@
u8 algorithm[4];
u8 encscheme[2];
u8 sigscheme[2];
+ __be32 paramsize;
u8 parameters[12]; /*assuming RSA*/
__be32 keysize;
u8 modulus[256];
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 8c99bf1..942a982 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -529,6 +529,10 @@
{
bool ret;
+ if (!port->guest_connected) {
+ /* Port got hot-unplugged. Let's exit. */
+ return false;
+ }
if (!port->host_connected)
return true;
@@ -1099,6 +1103,13 @@
{
struct port_buffer *buf;
+ if (port->guest_connected) {
+ port->guest_connected = false;
+ port->host_connected = false;
+ wake_up_interruptible(&port->waitqueue);
+ send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 0);
+ }
+
spin_lock_irq(&port->portdev->ports_lock);
list_del(&port->list);
spin_unlock_irq(&port->portdev->ports_lock);
@@ -1120,9 +1131,6 @@
hvc_remove(port->cons.hvc);
#endif
}
- if (port->guest_connected)
- send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 0);
-
sysfs_remove_group(&port->dev->kobj, &port_attribute_group);
device_destroy(pdrvdata.class, port->dev->devt);
cdev_del(&port->cdev);
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index bd1d116..7cdb6ee 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -3967,13 +3967,9 @@
font.charcount = op->charcount;
font.height = op->height;
font.width = op->width;
- font.data = kmalloc(size, GFP_KERNEL);
- if (!font.data)
- return -ENOMEM;
- if (copy_from_user(font.data, op->data, size)) {
- kfree(font.data);
- return -EFAULT;
- }
+ font.data = memdup_user(op->data, size);
+ if (IS_ERR(font.data))
+ return PTR_ERR(font.data);
acquire_console_sem();
if (vc->vc_sw->con_font_set)
rc = vc->vc_sw->con_font_set(vc, &font, op->flags);
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 6aa1028..cb19dbc 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -1303,7 +1303,9 @@
if (!perm)
goto eperm;
ret = copy_from_user(&ui, up, sizeof(struct unimapinit));
- if (!ret)
+ if (ret)
+ ret = -EFAULT;
+ else
con_clear_unimap(vc, &ui);
break;
}
diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c
index d7be69f1..b7dab32 100644
--- a/drivers/clocksource/cs5535-clockevt.c
+++ b/drivers/clocksource/cs5535-clockevt.c
@@ -194,6 +194,6 @@
module_init(cs5535_mfgpt_init);
-MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>");
+MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
MODULE_DESCRIPTION("CS5535/CS5536 MFGPT clock event driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index f6677cb..717305d 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -412,18 +412,10 @@
static int sh_cmt_clocksource_enable(struct clocksource *cs)
{
struct sh_cmt_priv *p = cs_to_sh_cmt(cs);
- int ret;
p->total_cycles = 0;
- ret = sh_cmt_start(p, FLAG_CLOCKSOURCE);
- if (ret)
- return ret;
-
- /* TODO: calculate good shift from rate and counter bit width */
- cs->shift = 0;
- cs->mult = clocksource_hz2mult(p->rate, cs->shift);
- return 0;
+ return sh_cmt_start(p, FLAG_CLOCKSOURCE);
}
static void sh_cmt_clocksource_disable(struct clocksource *cs)
@@ -450,8 +442,20 @@
cs->resume = sh_cmt_clocksource_resume;
cs->mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ /* clk_get_rate() needs an enabled clock */
+ clk_enable(p->clk);
+ p->rate = clk_get_rate(p->clk) / (p->width == 16) ? 512 : 8;
+ clk_disable(p->clk);
+
+ /* TODO: calculate good shift from rate and counter bit width */
+ cs->shift = 0;
+ cs->mult = clocksource_hz2mult(p->rate, cs->shift);
+
dev_info(&p->pdev->dev, "used as clock source\n");
+
clocksource_register(cs);
+
return 0;
}
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 8e44e14..de71590 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -199,16 +199,8 @@
static int sh_tmu_clocksource_enable(struct clocksource *cs)
{
struct sh_tmu_priv *p = cs_to_sh_tmu(cs);
- int ret;
- ret = sh_tmu_enable(p);
- if (ret)
- return ret;
-
- /* TODO: calculate good shift from rate and counter bit width */
- cs->shift = 10;
- cs->mult = clocksource_hz2mult(p->rate, cs->shift);
- return 0;
+ return sh_tmu_enable(p);
}
static void sh_tmu_clocksource_disable(struct clocksource *cs)
@@ -228,6 +220,16 @@
cs->disable = sh_tmu_clocksource_disable;
cs->mask = CLOCKSOURCE_MASK(32);
cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ /* clk_get_rate() needs an enabled clock */
+ clk_enable(p->clk);
+ /* channel will be configured at parent clock / 4 */
+ p->rate = clk_get_rate(p->clk) / 4;
+ clk_disable(p->clk);
+ /* TODO: calculate good shift from rate and counter bit width */
+ cs->shift = 10;
+ cs->mult = clocksource_hz2mult(p->rate, cs->shift);
+
dev_info(&p->pdev->dev, "used as clock source\n");
clocksource_register(cs);
return 0;
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index 12fdd39..1994885 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -156,7 +156,7 @@
if (dev->enabled)
return 0;
- if (!cpuidle_curr_driver || !cpuidle_curr_governor)
+ if (!cpuidle_get_driver() || !cpuidle_curr_governor)
return -EIO;
if (!dev->state_count)
return -EINVAL;
@@ -207,7 +207,7 @@
{
if (!dev->enabled)
return;
- if (!cpuidle_curr_driver || !cpuidle_curr_governor)
+ if (!cpuidle_get_driver() || !cpuidle_curr_governor)
return;
dev->enabled = 0;
@@ -271,10 +271,11 @@
{
int ret;
struct sys_device *sys_dev = get_cpu_sysdev((unsigned long)dev->cpu);
+ struct cpuidle_driver *cpuidle_driver = cpuidle_get_driver();
if (!sys_dev)
return -EINVAL;
- if (!try_module_get(cpuidle_curr_driver->owner))
+ if (!try_module_get(cpuidle_driver->owner))
return -EINVAL;
init_completion(&dev->kobj_unregister);
@@ -284,7 +285,7 @@
per_cpu(cpuidle_devices, dev->cpu) = dev;
list_add(&dev->device_list, &cpuidle_detected_devices);
if ((ret = cpuidle_add_sysfs(sys_dev))) {
- module_put(cpuidle_curr_driver->owner);
+ module_put(cpuidle_driver->owner);
return ret;
}
@@ -325,6 +326,7 @@
void cpuidle_unregister_device(struct cpuidle_device *dev)
{
struct sys_device *sys_dev = get_cpu_sysdev((unsigned long)dev->cpu);
+ struct cpuidle_driver *cpuidle_driver = cpuidle_get_driver();
if (dev->registered == 0)
return;
@@ -340,7 +342,7 @@
cpuidle_resume_and_unlock();
- module_put(cpuidle_curr_driver->owner);
+ module_put(cpuidle_driver->owner);
}
EXPORT_SYMBOL_GPL(cpuidle_unregister_device);
diff --git a/drivers/cpuidle/cpuidle.h b/drivers/cpuidle/cpuidle.h
index 9476ba3..33e50d5 100644
--- a/drivers/cpuidle/cpuidle.h
+++ b/drivers/cpuidle/cpuidle.h
@@ -9,7 +9,6 @@
/* For internal use only */
extern struct cpuidle_governor *cpuidle_curr_governor;
-extern struct cpuidle_driver *cpuidle_curr_driver;
extern struct list_head cpuidle_governors;
extern struct list_head cpuidle_detected_devices;
extern struct mutex cpuidle_lock;
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index 2257004..fd1601e 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c
@@ -14,7 +14,7 @@
#include "cpuidle.h"
-struct cpuidle_driver *cpuidle_curr_driver;
+static struct cpuidle_driver *cpuidle_curr_driver;
DEFINE_SPINLOCK(cpuidle_driver_lock);
/**
@@ -40,13 +40,25 @@
EXPORT_SYMBOL_GPL(cpuidle_register_driver);
/**
+ * cpuidle_get_driver - return the current driver
+ */
+struct cpuidle_driver *cpuidle_get_driver(void)
+{
+ return cpuidle_curr_driver;
+}
+EXPORT_SYMBOL_GPL(cpuidle_get_driver);
+
+/**
* cpuidle_unregister_driver - unregisters a driver
* @drv: the driver
*/
void cpuidle_unregister_driver(struct cpuidle_driver *drv)
{
- if (!drv)
+ if (drv != cpuidle_curr_driver) {
+ WARN(1, "invalid cpuidle_unregister_driver(%s)\n",
+ drv->name);
return;
+ }
spin_lock(&cpuidle_driver_lock);
cpuidle_curr_driver = NULL;
diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index 52ff8aa..1b12870 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c
@@ -143,7 +143,7 @@
* This allows us to calculate
* E(duration)|iowait
*/
- if (nr_iowait_cpu())
+ if (nr_iowait_cpu(smp_processor_id()))
bucket = BUCKETS/2;
if (duration < 10)
@@ -175,7 +175,7 @@
mult += 2 * get_loadavg();
/* for IO wait tasks (per cpu!) we add 5x each */
- mult += 10 * nr_iowait_cpu();
+ mult += 10 * nr_iowait_cpu(smp_processor_id());
return mult;
}
diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index 0ba9c8b..0310ffa 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -47,10 +47,11 @@
char *buf)
{
ssize_t ret;
+ struct cpuidle_driver *cpuidle_driver = cpuidle_get_driver();
spin_lock(&cpuidle_driver_lock);
- if (cpuidle_curr_driver)
- ret = sprintf(buf, "%s\n", cpuidle_curr_driver->name);
+ if (cpuidle_driver)
+ ret = sprintf(buf, "%s\n", cpuidle_driver->name);
else
ret = sprintf(buf, "none\n");
spin_unlock(&cpuidle_driver_lock);
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 1b88779..9e01e96 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -166,6 +166,15 @@
config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
bool
+config PL330_DMA
+ tristate "DMA API Driver for PL330"
+ select DMA_ENGINE
+ depends on PL330
+ help
+ Select if your platform has one or more PL330 DMACs.
+ You need to provide platform specific settings via
+ platform_data for a dma-pl330 device.
+
config DMA_ENGINE
bool
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 2088142..0fe5ebb 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -22,3 +22,4 @@
obj-$(CONFIG_AMCC_PPC440SPE_ADMA) += ppc4xx/
obj-$(CONFIG_TIMB_DMA) += timb_dma.o
obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
+obj-$(CONFIG_PL330_DMA) += pl330.o
diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c
index 201e6e1..14a8c0f 100644
--- a/drivers/dma/mpc512x_dma.c
+++ b/drivers/dma/mpc512x_dma.c
@@ -630,7 +630,7 @@
static int __devinit mpc_dma_probe(struct of_device *op,
const struct of_device_id *match)
{
- struct device_node *dn = op->node;
+ struct device_node *dn = op->dev.of_node;
struct device *dev = &op->dev;
struct dma_device *dma;
struct mpc_dma *mdma;
@@ -771,12 +771,12 @@
};
static struct of_platform_driver mpc_dma_driver = {
- .match_table = mpc_dma_match,
.probe = mpc_dma_probe,
.remove = __devexit_p(mpc_dma_remove),
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = mpc_dma_match,
},
};
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
new file mode 100644
index 0000000..7c50f6d
--- /dev/null
+++ b/drivers/dma/pl330.c
@@ -0,0 +1,866 @@
+/* linux/drivers/dma/pl330.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
+
+#define NR_DEFAULT_DESC 16
+
+enum desc_status {
+ /* In the DMAC pool */
+ FREE,
+ /*
+ * Allocted to some channel during prep_xxx
+ * Also may be sitting on the work_list.
+ */
+ PREP,
+ /*
+ * Sitting on the work_list and already submitted
+ * to the PL330 core. Not more than two descriptors
+ * of a channel can be BUSY at any time.
+ */
+ BUSY,
+ /*
+ * Sitting on the channel work_list but xfer done
+ * by PL330 core
+ */
+ DONE,
+};
+
+struct dma_pl330_chan {
+ /* Schedule desc completion */
+ struct tasklet_struct task;
+
+ /* DMA-Engine Channel */
+ struct dma_chan chan;
+
+ /* Last completed cookie */
+ dma_cookie_t completed;
+
+ /* List of to be xfered descriptors */
+ struct list_head work_list;
+
+ /* Pointer to the DMAC that manages this channel,
+ * NULL if the channel is available to be acquired.
+ * As the parent, this DMAC also provides descriptors
+ * to the channel.
+ */
+ struct dma_pl330_dmac *dmac;
+
+ /* To protect channel manipulation */
+ spinlock_t lock;
+
+ /* Token of a hardware channel thread of PL330 DMAC
+ * NULL if the channel is available to be acquired.
+ */
+ void *pl330_chid;
+};
+
+struct dma_pl330_dmac {
+ struct pl330_info pif;
+
+ /* DMA-Engine Device */
+ struct dma_device ddma;
+
+ /* Pool of descriptors available for the DMAC's channels */
+ struct list_head desc_pool;
+ /* To protect desc_pool manipulation */
+ spinlock_t pool_lock;
+
+ /* Peripheral channels connected to this DMAC */
+ struct dma_pl330_chan peripherals[0]; /* keep at end */
+};
+
+struct dma_pl330_desc {
+ /* To attach to a queue as child */
+ struct list_head node;
+
+ /* Descriptor for the DMA Engine API */
+ struct dma_async_tx_descriptor txd;
+
+ /* Xfer for PL330 core */
+ struct pl330_xfer px;
+
+ struct pl330_reqcfg rqcfg;
+ struct pl330_req req;
+
+ enum desc_status status;
+
+ /* The channel which currently holds this desc */
+ struct dma_pl330_chan *pchan;
+};
+
+static inline struct dma_pl330_chan *
+to_pchan(struct dma_chan *ch)
+{
+ if (!ch)
+ return NULL;
+
+ return container_of(ch, struct dma_pl330_chan, chan);
+}
+
+static inline struct dma_pl330_desc *
+to_desc(struct dma_async_tx_descriptor *tx)
+{
+ return container_of(tx, struct dma_pl330_desc, txd);
+}
+
+static inline void free_desc_list(struct list_head *list)
+{
+ struct dma_pl330_dmac *pdmac;
+ struct dma_pl330_desc *desc;
+ struct dma_pl330_chan *pch;
+ unsigned long flags;
+
+ if (list_empty(list))
+ return;
+
+ /* Finish off the work list */
+ list_for_each_entry(desc, list, node) {
+ dma_async_tx_callback callback;
+ void *param;
+
+ /* All desc in a list belong to same channel */
+ pch = desc->pchan;
+ callback = desc->txd.callback;
+ param = desc->txd.callback_param;
+
+ if (callback)
+ callback(param);
+
+ desc->pchan = NULL;
+ }
+
+ pdmac = pch->dmac;
+
+ spin_lock_irqsave(&pdmac->pool_lock, flags);
+ list_splice_tail_init(list, &pdmac->desc_pool);
+ spin_unlock_irqrestore(&pdmac->pool_lock, flags);
+}
+
+static inline void fill_queue(struct dma_pl330_chan *pch)
+{
+ struct dma_pl330_desc *desc;
+ int ret;
+
+ list_for_each_entry(desc, &pch->work_list, node) {
+
+ /* If already submitted */
+ if (desc->status == BUSY)
+ break;
+
+ ret = pl330_submit_req(pch->pl330_chid,
+ &desc->req);
+ if (!ret) {
+ desc->status = BUSY;
+ break;
+ } else if (ret == -EAGAIN) {
+ /* QFull or DMAC Dying */
+ break;
+ } else {
+ /* Unacceptable request */
+ desc->status = DONE;
+ dev_err(pch->dmac->pif.dev, "%s:%d Bad Desc(%d)\n",
+ __func__, __LINE__, desc->txd.cookie);
+ tasklet_schedule(&pch->task);
+ }
+ }
+}
+
+static void pl330_tasklet(unsigned long data)
+{
+ struct dma_pl330_chan *pch = (struct dma_pl330_chan *)data;
+ struct dma_pl330_desc *desc, *_dt;
+ unsigned long flags;
+ LIST_HEAD(list);
+
+ spin_lock_irqsave(&pch->lock, flags);
+
+ /* Pick up ripe tomatoes */
+ list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
+ if (desc->status == DONE) {
+ pch->completed = desc->txd.cookie;
+ list_move_tail(&desc->node, &list);
+ }
+
+ /* Try to submit a req imm. next to the last completed cookie */
+ fill_queue(pch);
+
+ /* Make sure the PL330 Channel thread is active */
+ pl330_chan_ctrl(pch->pl330_chid, PL330_OP_START);
+
+ spin_unlock_irqrestore(&pch->lock, flags);
+
+ free_desc_list(&list);
+}
+
+static void dma_pl330_rqcb(void *token, enum pl330_op_err err)
+{
+ struct dma_pl330_desc *desc = token;
+ struct dma_pl330_chan *pch = desc->pchan;
+ unsigned long flags;
+
+ /* If desc aborted */
+ if (!pch)
+ return;
+
+ spin_lock_irqsave(&pch->lock, flags);
+
+ desc->status = DONE;
+
+ spin_unlock_irqrestore(&pch->lock, flags);
+
+ tasklet_schedule(&pch->task);
+}
+
+static int pl330_alloc_chan_resources(struct dma_chan *chan)
+{
+ struct dma_pl330_chan *pch = to_pchan(chan);
+ struct dma_pl330_dmac *pdmac = pch->dmac;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pch->lock, flags);
+
+ pch->completed = chan->cookie = 1;
+
+ pch->pl330_chid = pl330_request_channel(&pdmac->pif);
+ if (!pch->pl330_chid) {
+ spin_unlock_irqrestore(&pch->lock, flags);
+ return 0;
+ }
+
+ tasklet_init(&pch->task, pl330_tasklet, (unsigned long) pch);
+
+ spin_unlock_irqrestore(&pch->lock, flags);
+
+ return 1;
+}
+
+static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg)
+{
+ struct dma_pl330_chan *pch = to_pchan(chan);
+ struct dma_pl330_desc *desc;
+ unsigned long flags;
+
+ /* Only supports DMA_TERMINATE_ALL */
+ if (cmd != DMA_TERMINATE_ALL)
+ return -ENXIO;
+
+ spin_lock_irqsave(&pch->lock, flags);
+
+ /* FLUSH the PL330 Channel thread */
+ pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH);
+
+ /* Mark all desc done */
+ list_for_each_entry(desc, &pch->work_list, node)
+ desc->status = DONE;
+
+ spin_unlock_irqrestore(&pch->lock, flags);
+
+ pl330_tasklet((unsigned long) pch);
+
+ return 0;
+}
+
+static void pl330_free_chan_resources(struct dma_chan *chan)
+{
+ struct dma_pl330_chan *pch = to_pchan(chan);
+ unsigned long flags;
+
+ spin_lock_irqsave(&pch->lock, flags);
+
+ tasklet_kill(&pch->task);
+
+ pl330_release_channel(pch->pl330_chid);
+ pch->pl330_chid = NULL;
+
+ spin_unlock_irqrestore(&pch->lock, flags);
+}
+
+static enum dma_status
+pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
+ struct dma_tx_state *txstate)
+{
+ struct dma_pl330_chan *pch = to_pchan(chan);
+ dma_cookie_t last_done, last_used;
+ int ret;
+
+ last_done = pch->completed;
+ last_used = chan->cookie;
+
+ ret = dma_async_is_complete(cookie, last_done, last_used);
+
+ dma_set_tx_state(txstate, last_done, last_used, 0);
+
+ return ret;
+}
+
+static void pl330_issue_pending(struct dma_chan *chan)
+{
+ pl330_tasklet((unsigned long) to_pchan(chan));
+}
+
+/*
+ * We returned the last one of the circular list of descriptor(s)
+ * from prep_xxx, so the argument to submit corresponds to the last
+ * descriptor of the list.
+ */
+static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+ struct dma_pl330_desc *desc, *last = to_desc(tx);
+ struct dma_pl330_chan *pch = to_pchan(tx->chan);
+ dma_cookie_t cookie;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pch->lock, flags);
+
+ /* Assign cookies to all nodes */
+ cookie = tx->chan->cookie;
+
+ while (!list_empty(&last->node)) {
+ desc = list_entry(last->node.next, struct dma_pl330_desc, node);
+
+ if (++cookie < 0)
+ cookie = 1;
+ desc->txd.cookie = cookie;
+
+ list_move_tail(&desc->node, &pch->work_list);
+ }
+
+ if (++cookie < 0)
+ cookie = 1;
+ last->txd.cookie = cookie;
+
+ list_add_tail(&last->node, &pch->work_list);
+
+ tx->chan->cookie = cookie;
+
+ spin_unlock_irqrestore(&pch->lock, flags);
+
+ return cookie;
+}
+
+static inline void _init_desc(struct dma_pl330_desc *desc)
+{
+ desc->pchan = NULL;
+ desc->req.x = &desc->px;
+ desc->req.token = desc;
+ desc->rqcfg.swap = SWAP_NO;
+ desc->rqcfg.privileged = 0;
+ desc->rqcfg.insnaccess = 0;
+ desc->rqcfg.scctl = SCCTRL0;
+ desc->rqcfg.dcctl = DCCTRL0;
+ desc->req.cfg = &desc->rqcfg;
+ desc->req.xfer_cb = dma_pl330_rqcb;
+ desc->txd.tx_submit = pl330_tx_submit;
+
+ INIT_LIST_HEAD(&desc->node);
+}
+
+/* Returns the number of descriptors added to the DMAC pool */
+int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count)
+{
+ struct dma_pl330_desc *desc;
+ unsigned long flags;
+ int i;
+
+ if (!pdmac)
+ return 0;
+
+ desc = kmalloc(count * sizeof(*desc), flg);
+ if (!desc)
+ return 0;
+
+ spin_lock_irqsave(&pdmac->pool_lock, flags);
+
+ for (i = 0; i < count; i++) {
+ _init_desc(&desc[i]);
+ list_add_tail(&desc[i].node, &pdmac->desc_pool);
+ }
+
+ spin_unlock_irqrestore(&pdmac->pool_lock, flags);
+
+ return count;
+}
+
+static struct dma_pl330_desc *
+pluck_desc(struct dma_pl330_dmac *pdmac)
+{
+ struct dma_pl330_desc *desc = NULL;
+ unsigned long flags;
+
+ if (!pdmac)
+ return NULL;
+
+ spin_lock_irqsave(&pdmac->pool_lock, flags);
+
+ if (!list_empty(&pdmac->desc_pool)) {
+ desc = list_entry(pdmac->desc_pool.next,
+ struct dma_pl330_desc, node);
+
+ list_del_init(&desc->node);
+
+ desc->status = PREP;
+ desc->txd.callback = NULL;
+ }
+
+ spin_unlock_irqrestore(&pdmac->pool_lock, flags);
+
+ return desc;
+}
+
+static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
+{
+ struct dma_pl330_dmac *pdmac = pch->dmac;
+ struct dma_pl330_peri *peri = pch->chan.private;
+ struct dma_pl330_desc *desc;
+
+ /* Pluck one desc from the pool of DMAC */
+ desc = pluck_desc(pdmac);
+
+ /* If the DMAC pool is empty, alloc new */
+ if (!desc) {
+ if (!add_desc(pdmac, GFP_ATOMIC, 1))
+ return NULL;
+
+ /* Try again */
+ desc = pluck_desc(pdmac);
+ if (!desc) {
+ dev_err(pch->dmac->pif.dev,
+ "%s:%d ALERT!\n", __func__, __LINE__);
+ return NULL;
+ }
+ }
+
+ /* Initialize the descriptor */
+ desc->pchan = pch;
+ desc->txd.cookie = 0;
+ async_tx_ack(&desc->txd);
+
+ desc->req.rqtype = peri->rqtype;
+ desc->req.peri = peri->peri_id;
+
+ dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
+
+ return desc;
+}
+
+static inline void fill_px(struct pl330_xfer *px,
+ dma_addr_t dst, dma_addr_t src, size_t len)
+{
+ px->next = NULL;
+ px->bytes = len;
+ px->dst_addr = dst;
+ px->src_addr = src;
+}
+
+static struct dma_pl330_desc *
+__pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst,
+ dma_addr_t src, size_t len)
+{
+ struct dma_pl330_desc *desc = pl330_get_desc(pch);
+
+ if (!desc) {
+ dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n",
+ __func__, __LINE__);
+ return NULL;
+ }
+
+ /*
+ * Ideally we should lookout for reqs bigger than
+ * those that can be programmed with 256 bytes of
+ * MC buffer, but considering a req size is seldom
+ * going to be word-unaligned and more than 200MB,
+ * we take it easy.
+ * Also, should the limit is reached we'd rather
+ * have the platform increase MC buffer size than
+ * complicating this API driver.
+ */
+ fill_px(&desc->px, dst, src, len);
+
+ return desc;
+}
+
+/* Call after fixing burst size */
+static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
+{
+ struct dma_pl330_chan *pch = desc->pchan;
+ struct pl330_info *pi = &pch->dmac->pif;
+ int burst_len;
+
+ burst_len = pi->pcfg.data_bus_width / 8;
+ burst_len *= pi->pcfg.data_buf_dep;
+ burst_len >>= desc->rqcfg.brst_size;
+
+ /* src/dst_burst_len can't be more than 16 */
+ if (burst_len > 16)
+ burst_len = 16;
+
+ while (burst_len > 1) {
+ if (!(len % (burst_len << desc->rqcfg.brst_size)))
+ break;
+ burst_len--;
+ }
+
+ return burst_len;
+}
+
+static struct dma_async_tx_descriptor *
+pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
+ dma_addr_t src, size_t len, unsigned long flags)
+{
+ struct dma_pl330_desc *desc;
+ struct dma_pl330_chan *pch = to_pchan(chan);
+ struct dma_pl330_peri *peri = chan->private;
+ struct pl330_info *pi;
+ int burst;
+
+ if (unlikely(!pch || !len || !peri))
+ return NULL;
+
+ if (peri->rqtype != MEMTOMEM)
+ return NULL;
+
+ pi = &pch->dmac->pif;
+
+ desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
+ if (!desc)
+ return NULL;
+
+ desc->rqcfg.src_inc = 1;
+ desc->rqcfg.dst_inc = 1;
+
+ /* Select max possible burst size */
+ burst = pi->pcfg.data_bus_width / 8;
+
+ while (burst > 1) {
+ if (!(len % burst))
+ break;
+ burst /= 2;
+ }
+
+ desc->rqcfg.brst_size = 0;
+ while (burst != (1 << desc->rqcfg.brst_size))
+ desc->rqcfg.brst_size++;
+
+ desc->rqcfg.brst_len = get_burst_len(desc, len);
+
+ desc->txd.flags = flags;
+
+ return &desc->txd;
+}
+
+static struct dma_async_tx_descriptor *
+pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+ unsigned int sg_len, enum dma_data_direction direction,
+ unsigned long flg)
+{
+ struct dma_pl330_desc *first, *desc = NULL;
+ struct dma_pl330_chan *pch = to_pchan(chan);
+ struct dma_pl330_peri *peri = chan->private;
+ struct scatterlist *sg;
+ unsigned long flags;
+ int i, burst_size;
+ dma_addr_t addr;
+
+ if (unlikely(!pch || !sgl || !sg_len))
+ return NULL;
+
+ /* Make sure the direction is consistent */
+ if ((direction == DMA_TO_DEVICE &&
+ peri->rqtype != MEMTODEV) ||
+ (direction == DMA_FROM_DEVICE &&
+ peri->rqtype != DEVTOMEM)) {
+ dev_err(pch->dmac->pif.dev, "%s:%d Invalid Direction\n",
+ __func__, __LINE__);
+ return NULL;
+ }
+
+ addr = peri->fifo_addr;
+ burst_size = peri->burst_sz;
+
+ first = NULL;
+
+ for_each_sg(sgl, sg, sg_len, i) {
+
+ desc = pl330_get_desc(pch);
+ if (!desc) {
+ struct dma_pl330_dmac *pdmac = pch->dmac;
+
+ dev_err(pch->dmac->pif.dev,
+ "%s:%d Unable to fetch desc\n",
+ __func__, __LINE__);
+ if (!first)
+ return NULL;
+
+ spin_lock_irqsave(&pdmac->pool_lock, flags);
+
+ while (!list_empty(&first->node)) {
+ desc = list_entry(first->node.next,
+ struct dma_pl330_desc, node);
+ list_move_tail(&desc->node, &pdmac->desc_pool);
+ }
+
+ list_move_tail(&first->node, &pdmac->desc_pool);
+
+ spin_unlock_irqrestore(&pdmac->pool_lock, flags);
+
+ return NULL;
+ }
+
+ if (!first)
+ first = desc;
+ else
+ list_add_tail(&desc->node, &first->node);
+
+ if (direction == DMA_TO_DEVICE) {
+ desc->rqcfg.src_inc = 1;
+ desc->rqcfg.dst_inc = 0;
+ fill_px(&desc->px,
+ addr, sg_dma_address(sg), sg_dma_len(sg));
+ } else {
+ desc->rqcfg.src_inc = 0;
+ desc->rqcfg.dst_inc = 1;
+ fill_px(&desc->px,
+ sg_dma_address(sg), addr, sg_dma_len(sg));
+ }
+
+ desc->rqcfg.brst_size = burst_size;
+ desc->rqcfg.brst_len = 1;
+ }
+
+ /* Return the last desc in the chain */
+ desc->txd.flags = flg;
+ return &desc->txd;
+}
+
+static irqreturn_t pl330_irq_handler(int irq, void *data)
+{
+ if (pl330_update(data))
+ return IRQ_HANDLED;
+ else
+ return IRQ_NONE;
+}
+
+static int __devinit
+pl330_probe(struct amba_device *adev, struct amba_id *id)
+{
+ struct dma_pl330_platdata *pdat;
+ struct dma_pl330_dmac *pdmac;
+ struct dma_pl330_chan *pch;
+ struct pl330_info *pi;
+ struct dma_device *pd;
+ struct resource *res;
+ int i, ret, irq;
+
+ pdat = adev->dev.platform_data;
+
+ if (!pdat || !pdat->nr_valid_peri) {
+ dev_err(&adev->dev, "platform data missing\n");
+ return -ENODEV;
+ }
+
+ /* Allocate a new DMAC and its Channels */
+ pdmac = kzalloc(pdat->nr_valid_peri * sizeof(*pch)
+ + sizeof(*pdmac), GFP_KERNEL);
+ if (!pdmac) {
+ dev_err(&adev->dev, "unable to allocate mem\n");
+ return -ENOMEM;
+ }
+
+ pi = &pdmac->pif;
+ pi->dev = &adev->dev;
+ pi->pl330_data = NULL;
+ pi->mcbufsz = pdat->mcbuf_sz;
+
+ res = &adev->res;
+ request_mem_region(res->start, resource_size(res), "dma-pl330");
+
+ pi->base = ioremap(res->start, resource_size(res));
+ if (!pi->base) {
+ ret = -ENXIO;
+ goto probe_err1;
+ }
+
+ irq = adev->irq[0];
+ ret = request_irq(irq, pl330_irq_handler, 0,
+ dev_name(&adev->dev), pi);
+ if (ret)
+ goto probe_err2;
+
+ ret = pl330_add(pi);
+ if (ret)
+ goto probe_err3;
+
+ INIT_LIST_HEAD(&pdmac->desc_pool);
+ spin_lock_init(&pdmac->pool_lock);
+
+ /* Create a descriptor pool of default size */
+ if (!add_desc(pdmac, GFP_KERNEL, NR_DEFAULT_DESC))
+ dev_warn(&adev->dev, "unable to allocate desc\n");
+
+ pd = &pdmac->ddma;
+ INIT_LIST_HEAD(&pd->channels);
+
+ /* Initialize channel parameters */
+ for (i = 0; i < pdat->nr_valid_peri; i++) {
+ struct dma_pl330_peri *peri = &pdat->peri[i];
+ pch = &pdmac->peripherals[i];
+
+ switch (peri->rqtype) {
+ case MEMTOMEM:
+ dma_cap_set(DMA_MEMCPY, pd->cap_mask);
+ break;
+ case MEMTODEV:
+ case DEVTOMEM:
+ dma_cap_set(DMA_SLAVE, pd->cap_mask);
+ break;
+ default:
+ dev_err(&adev->dev, "DEVTODEV Not Supported\n");
+ continue;
+ }
+
+ INIT_LIST_HEAD(&pch->work_list);
+ spin_lock_init(&pch->lock);
+ pch->pl330_chid = NULL;
+ pch->chan.private = peri;
+ pch->chan.device = pd;
+ pch->chan.chan_id = i;
+ pch->dmac = pdmac;
+
+ /* Add the channel to the DMAC list */
+ pd->chancnt++;
+ list_add_tail(&pch->chan.device_node, &pd->channels);
+ }
+
+ pd->dev = &adev->dev;
+
+ pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
+ pd->device_free_chan_resources = pl330_free_chan_resources;
+ pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
+ pd->device_tx_status = pl330_tx_status;
+ pd->device_prep_slave_sg = pl330_prep_slave_sg;
+ pd->device_control = pl330_control;
+ pd->device_issue_pending = pl330_issue_pending;
+
+ ret = dma_async_device_register(pd);
+ if (ret) {
+ dev_err(&adev->dev, "unable to register DMAC\n");
+ goto probe_err4;
+ }
+
+ amba_set_drvdata(adev, pdmac);
+
+ dev_info(&adev->dev,
+ "Loaded driver for PL330 DMAC-%d\n", adev->periphid);
+ dev_info(&adev->dev,
+ "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
+ pi->pcfg.data_buf_dep,
+ pi->pcfg.data_bus_width / 8, pi->pcfg.num_chan,
+ pi->pcfg.num_peri, pi->pcfg.num_events);
+
+ return 0;
+
+probe_err4:
+ pl330_del(pi);
+probe_err3:
+ free_irq(irq, pi);
+probe_err2:
+ iounmap(pi->base);
+probe_err1:
+ release_mem_region(res->start, resource_size(res));
+ kfree(pdmac);
+
+ return ret;
+}
+
+static int __devexit pl330_remove(struct amba_device *adev)
+{
+ struct dma_pl330_dmac *pdmac = amba_get_drvdata(adev);
+ struct dma_pl330_chan *pch, *_p;
+ struct pl330_info *pi;
+ struct resource *res;
+ int irq;
+
+ if (!pdmac)
+ return 0;
+
+ amba_set_drvdata(adev, NULL);
+
+ /* Idle the DMAC */
+ list_for_each_entry_safe(pch, _p, &pdmac->ddma.channels,
+ chan.device_node) {
+
+ /* Remove the channel */
+ list_del(&pch->chan.device_node);
+
+ /* Flush the channel */
+ pl330_control(&pch->chan, DMA_TERMINATE_ALL, 0);
+ pl330_free_chan_resources(&pch->chan);
+ }
+
+ pi = &pdmac->pif;
+
+ pl330_del(pi);
+
+ irq = adev->irq[0];
+ free_irq(irq, pi);
+
+ iounmap(pi->base);
+
+ res = &adev->res;
+ release_mem_region(res->start, resource_size(res));
+
+ kfree(pdmac);
+
+ return 0;
+}
+
+static struct amba_id pl330_ids[] = {
+ {
+ .id = 0x00041330,
+ .mask = 0x000fffff,
+ },
+ { 0, 0 },
+};
+
+static struct amba_driver pl330_driver = {
+ .drv = {
+ .owner = THIS_MODULE,
+ .name = "dma-pl330",
+ },
+ .id_table = pl330_ids,
+ .probe = pl330_probe,
+ .remove = pl330_remove,
+};
+
+static int __init pl330_init(void)
+{
+ return amba_driver_register(&pl330_driver);
+}
+module_init(pl330_init);
+
+static void __exit pl330_exit(void)
+{
+ amba_driver_unregister(&pl330_driver);
+ return;
+}
+module_exit(pl330_exit);
+
+MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
+MODULE_DESCRIPTION("API Driver for PL330 DMAC");
+MODULE_LICENSE("GPL");
diff --git a/drivers/dma/ppc4xx/adma.c b/drivers/dma/ppc4xx/adma.c
index fa98abe..7c37479 100644
--- a/drivers/dma/ppc4xx/adma.c
+++ b/drivers/dma/ppc4xx/adma.c
@@ -4257,10 +4257,12 @@
struct ppc440spe_adma_chan *chan,
int *initcode)
{
+ struct of_device *ofdev;
struct device_node *np;
int ret;
- np = container_of(adev->dev, struct of_device, dev)->node;
+ ofdev = container_of(adev->dev, struct of_device, dev);
+ np = ofdev->dev.of_node;
if (adev->id != PPC440SPE_XOR_ID) {
adev->err_irq = irq_of_parse_and_map(np, 1);
if (adev->err_irq == NO_IRQ) {
@@ -4394,7 +4396,7 @@
static int __devinit ppc440spe_adma_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
- struct device_node *np = ofdev->node;
+ struct device_node *np = ofdev->dev.of_node;
struct resource res;
struct ppc440spe_adma_device *adev;
struct ppc440spe_adma_chan *chan;
@@ -4626,7 +4628,7 @@
static int __devexit ppc440spe_adma_remove(struct of_device *ofdev)
{
struct ppc440spe_adma_device *adev = dev_get_drvdata(&ofdev->dev);
- struct device_node *np = ofdev->node;
+ struct device_node *np = ofdev->dev.of_node;
struct resource res;
struct dma_chan *chan, *_chan;
struct ppc_dma_chan_ref *ref, *_ref;
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 55c9c59..0d2f9db 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -69,6 +69,9 @@
occurred so that a particular failing memory module can be
replaced. If unsure, select 'Y'.
+config EDAC_MCE
+ bool
+
config EDAC_AMD64
tristate "AMD64 (Opteron, Athlon64) K8, F10h, F11h"
depends on EDAC_MM_EDAC && K8_NB && X86_64 && PCI && EDAC_DECODE_MCE
@@ -166,6 +169,16 @@
Support for error detection and correction the Intel
i5400 MCH chipset (Seaburg).
+config EDAC_I7CORE
+ tristate "Intel i7 Core (Nehalem) processors"
+ depends on EDAC_MM_EDAC && PCI && X86
+ select EDAC_MCE
+ help
+ Support for error detection and correction the Intel
+ i7 Core (Nehalem) Integrated Memory Controller that exists on
+ newer processors like i7 Core, i7 Core Extreme, Xeon 35xx
+ and Xeon 55xx processors.
+
config EDAC_I82860
tristate "Intel 82860"
depends on EDAC_MM_EDAC && PCI && X86_32
@@ -196,7 +209,7 @@
config EDAC_MPC85XX
tristate "Freescale MPC83xx / MPC85xx"
- depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || MPC85xx)
+ depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || PPC_85xx)
help
Support for error detection and correction on the Freescale
MPC8349, MPC8560, MPC8540, MPC8548
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index bc5dc23..ca6b1bb 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -8,6 +8,7 @@
obj-$(CONFIG_EDAC) := edac_stub.o
obj-$(CONFIG_EDAC_MM_EDAC) += edac_core.o
+obj-$(CONFIG_EDAC_MCE) += edac_mce.o
edac_core-objs := edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
edac_core-objs += edac_module.o edac_device_sysfs.o
@@ -23,6 +24,7 @@
obj-$(CONFIG_EDAC_I5000) += i5000_edac.o
obj-$(CONFIG_EDAC_I5100) += i5100_edac.o
obj-$(CONFIG_EDAC_I5400) += i5400_edac.o
+obj-$(CONFIG_EDAC_I7CORE) += i7core_edac.o
obj-$(CONFIG_EDAC_E7XXX) += e7xxx_edac.o
obj-$(CONFIG_EDAC_E752X) += e752x_edac.o
obj-$(CONFIG_EDAC_I82443BXGX) += i82443bxgx_edac.o
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index cf17dbb..ac9f798 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -1958,20 +1958,20 @@
u32 value = 0;
int err_sym = 0;
- amd64_read_pci_cfg(pvt->misc_f3_ctl, 0x180, &value);
+ if (boot_cpu_data.x86 == 0x10) {
- /* F3x180[EccSymbolSize]=1, x8 symbols */
- if (boot_cpu_data.x86 == 0x10 &&
- boot_cpu_data.x86_model > 7 &&
- value & BIT(25)) {
- err_sym = decode_syndrome(syndrome, x8_vectors,
- ARRAY_SIZE(x8_vectors), 8);
- return map_err_sym_to_channel(err_sym, 8);
- } else {
- err_sym = decode_syndrome(syndrome, x4_vectors,
- ARRAY_SIZE(x4_vectors), 4);
- return map_err_sym_to_channel(err_sym, 4);
+ amd64_read_pci_cfg(pvt->misc_f3_ctl, 0x180, &value);
+
+ /* F3x180[EccSymbolSize]=1 => x8 symbols */
+ if (boot_cpu_data.x86_model > 7 &&
+ value & BIT(25)) {
+ err_sym = decode_syndrome(syndrome, x8_vectors,
+ ARRAY_SIZE(x8_vectors), 8);
+ return map_err_sym_to_channel(err_sym, 8);
+ }
}
+ err_sym = decode_syndrome(syndrome, x4_vectors, ARRAY_SIZE(x4_vectors), 4);
+ return map_err_sym_to_channel(err_sym, 4);
}
/*
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index 001b2e7..efca934 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -341,12 +341,30 @@
struct channel_info *channels;
};
+struct mcidev_sysfs_group {
+ const char *name; /* group name */
+ struct mcidev_sysfs_attribute *mcidev_attr; /* group attributes */
+};
+
+struct mcidev_sysfs_group_kobj {
+ struct list_head list; /* list for all instances within a mc */
+
+ struct kobject kobj; /* kobj for the group */
+
+ struct mcidev_sysfs_group *grp; /* group description table */
+ struct mem_ctl_info *mci; /* the parent */
+};
+
/* mcidev_sysfs_attribute structure
* used for driver sysfs attributes and in mem_ctl_info
* sysfs top level entries
*/
struct mcidev_sysfs_attribute {
- struct attribute attr;
+ /* It should use either attr or grp */
+ struct attribute attr;
+ struct mcidev_sysfs_group *grp; /* Points to a group of attributes */
+
+ /* Ops for show/store values at the attribute - not used on group */
ssize_t (*show)(struct mem_ctl_info *,char *);
ssize_t (*store)(struct mem_ctl_info *, const char *,size_t);
};
@@ -424,6 +442,9 @@
/* edac sysfs device control */
struct kobject edac_mci_kobj;
+ /* list for all grp instances within a mc */
+ struct list_head grp_kobj_list;
+
/* Additional top controller level attributes, but specified
* by the low level driver.
*
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index 418b65f..c200c2f 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -557,6 +557,8 @@
struct mem_ctl_info *mem_ctl_info = to_mci(kobj);
struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr);
+ debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info);
+
if (mcidev_attr->show)
return mcidev_attr->show(mem_ctl_info, buffer);
@@ -569,6 +571,8 @@
struct mem_ctl_info *mem_ctl_info = to_mci(kobj);
struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr);
+ debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info);
+
if (mcidev_attr->store)
return mcidev_attr->store(mem_ctl_info, buffer, count);
@@ -726,28 +730,118 @@
#define EDAC_DEVICE_SYMLINK "device"
+#define grp_to_mci(k) (container_of(k, struct mcidev_sysfs_group_kobj, kobj)->mci)
+
+/* MCI show/store functions for top most object */
+static ssize_t inst_grp_show(struct kobject *kobj, struct attribute *attr,
+ char *buffer)
+{
+ struct mem_ctl_info *mem_ctl_info = grp_to_mci(kobj);
+ struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr);
+
+ debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info);
+
+ if (mcidev_attr->show)
+ return mcidev_attr->show(mem_ctl_info, buffer);
+
+ return -EIO;
+}
+
+static ssize_t inst_grp_store(struct kobject *kobj, struct attribute *attr,
+ const char *buffer, size_t count)
+{
+ struct mem_ctl_info *mem_ctl_info = grp_to_mci(kobj);
+ struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr);
+
+ debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info);
+
+ if (mcidev_attr->store)
+ return mcidev_attr->store(mem_ctl_info, buffer, count);
+
+ return -EIO;
+}
+
+/* No memory to release for this kobj */
+static void edac_inst_grp_release(struct kobject *kobj)
+{
+ struct mcidev_sysfs_group_kobj *grp;
+ struct mem_ctl_info *mci;
+
+ debugf1("%s()\n", __func__);
+
+ grp = container_of(kobj, struct mcidev_sysfs_group_kobj, kobj);
+ mci = grp->mci;
+
+ kobject_put(&mci->edac_mci_kobj);
+}
+
+/* Intermediate show/store table */
+static struct sysfs_ops inst_grp_ops = {
+ .show = inst_grp_show,
+ .store = inst_grp_store
+};
+
+/* the kobj_type instance for a instance group */
+static struct kobj_type ktype_inst_grp = {
+ .release = edac_inst_grp_release,
+ .sysfs_ops = &inst_grp_ops,
+};
+
+
/*
* edac_create_mci_instance_attributes
- * create MC driver specific attributes at the topmost level
- * directory of this mci instance.
+ * create MC driver specific attributes bellow an specified kobj
+ * This routine calls itself recursively, in order to create an entire
+ * object tree.
*/
-static int edac_create_mci_instance_attributes(struct mem_ctl_info *mci)
+static int edac_create_mci_instance_attributes(struct mem_ctl_info *mci,
+ struct mcidev_sysfs_attribute *sysfs_attrib,
+ struct kobject *kobj)
{
int err;
- struct mcidev_sysfs_attribute *sysfs_attrib;
- /* point to the start of the array and iterate over it
- * adding each attribute listed to this mci instance's kobject
- */
- sysfs_attrib = mci->mc_driver_sysfs_attributes;
+ debugf1("%s()\n", __func__);
- while (sysfs_attrib && sysfs_attrib->attr.name) {
- err = sysfs_create_file(&mci->edac_mci_kobj,
- (struct attribute*) sysfs_attrib);
+ while (sysfs_attrib) {
+ if (sysfs_attrib->grp) {
+ struct mcidev_sysfs_group_kobj *grp_kobj;
+
+ grp_kobj = kzalloc(sizeof(*grp_kobj), GFP_KERNEL);
+ if (!grp_kobj)
+ return -ENOMEM;
+
+ list_add_tail(&grp_kobj->list, &mci->grp_kobj_list);
+
+ grp_kobj->grp = sysfs_attrib->grp;
+ grp_kobj->mci = mci;
+
+ debugf0("%s() grp %s, mci %p\n", __func__,
+ sysfs_attrib->grp->name, mci);
+
+ err = kobject_init_and_add(&grp_kobj->kobj,
+ &ktype_inst_grp,
+ &mci->edac_mci_kobj,
+ sysfs_attrib->grp->name);
+ if (err)
+ return err;
+
+ err = edac_create_mci_instance_attributes(mci,
+ grp_kobj->grp->mcidev_attr,
+ &grp_kobj->kobj);
+
+ if (err)
+ return err;
+ } else if (sysfs_attrib->attr.name) {
+ debugf0("%s() file %s\n", __func__,
+ sysfs_attrib->attr.name);
+
+ err = sysfs_create_file(kobj, &sysfs_attrib->attr);
+ } else
+ break;
+
if (err) {
return err;
}
-
sysfs_attrib++;
}
@@ -759,21 +853,44 @@
* remove MC driver specific attributes at the topmost level
* directory of this mci instance.
*/
-static void edac_remove_mci_instance_attributes(struct mem_ctl_info *mci)
+static void edac_remove_mci_instance_attributes(struct mem_ctl_info *mci,
+ struct mcidev_sysfs_attribute *sysfs_attrib,
+ struct kobject *kobj, int count)
{
- struct mcidev_sysfs_attribute *sysfs_attrib;
+ struct mcidev_sysfs_group_kobj *grp_kobj, *tmp;
- /* point to the start of the array and iterate over it
- * adding each attribute listed to this mci instance's kobject
+ debugf1("%s()\n", __func__);
+
+ /*
+ * loop if there are attributes and until we hit a NULL entry
+ * Remove first all the atributes
*/
- sysfs_attrib = mci->mc_driver_sysfs_attributes;
-
- /* loop if there are attributes and until we hit a NULL entry */
- while (sysfs_attrib && sysfs_attrib->attr.name) {
- sysfs_remove_file(&mci->edac_mci_kobj,
- (struct attribute *) sysfs_attrib);
+ while (sysfs_attrib) {
+ if (sysfs_attrib->grp) {
+ list_for_each_entry(grp_kobj, &mci->grp_kobj_list,
+ list)
+ if (grp_kobj->grp == sysfs_attrib->grp)
+ edac_remove_mci_instance_attributes(mci,
+ grp_kobj->grp->mcidev_attr,
+ &grp_kobj->kobj, count + 1);
+ } else if (sysfs_attrib->attr.name) {
+ debugf0("%s() file %s\n", __func__,
+ sysfs_attrib->attr.name);
+ sysfs_remove_file(kobj, &sysfs_attrib->attr);
+ } else
+ break;
sysfs_attrib++;
}
+
+ /*
+ * Now that all attributes got removed, it is save to remove all groups
+ */
+ if (!count)
+ list_for_each_entry_safe(grp_kobj, tmp, &mci->grp_kobj_list,
+ list) {
+ debugf0("%s() grp %s\n", __func__, grp_kobj->grp->name);
+ kobject_put(&grp_kobj->kobj);
+ }
}
@@ -794,6 +911,8 @@
debugf0("%s() idx=%d\n", __func__, mci->mc_idx);
+ INIT_LIST_HEAD(&mci->grp_kobj_list);
+
/* create a symlink for the device */
err = sysfs_create_link(kobj_mci, &mci->dev->kobj,
EDAC_DEVICE_SYMLINK);
@@ -806,7 +925,9 @@
* then create them now for the driver.
*/
if (mci->mc_driver_sysfs_attributes) {
- err = edac_create_mci_instance_attributes(mci);
+ err = edac_create_mci_instance_attributes(mci,
+ mci->mc_driver_sysfs_attributes,
+ &mci->edac_mci_kobj);
if (err) {
debugf1("%s() failure to create mci attributes\n",
__func__);
@@ -841,7 +962,8 @@
}
/* remove the mci instance's attributes, if any */
- edac_remove_mci_instance_attributes(mci);
+ edac_remove_mci_instance_attributes(mci,
+ mci->mc_driver_sysfs_attributes, &mci->edac_mci_kobj, 0);
/* remove the symlink */
sysfs_remove_link(kobj_mci, EDAC_DEVICE_SYMLINK);
@@ -875,8 +997,9 @@
debugf0("%s() remove_mci_instance\n", __func__);
/* remove this mci instance's attribtes */
- edac_remove_mci_instance_attributes(mci);
-
+ edac_remove_mci_instance_attributes(mci,
+ mci->mc_driver_sysfs_attributes,
+ &mci->edac_mci_kobj, 0);
debugf0("%s() unregister this mci kobj\n", __func__);
/* unregister this instance's kobject */
diff --git a/drivers/edac/edac_mce.c b/drivers/edac/edac_mce.c
new file mode 100644
index 0000000..9ccdc5b
--- /dev/null
+++ b/drivers/edac/edac_mce.c
@@ -0,0 +1,61 @@
+/* Provides edac interface to mcelog events
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2.
+ *
+ * Copyright (c) 2009 by:
+ * Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * Red Hat Inc. http://www.redhat.com
+ */
+
+#include <linux/module.h>
+#include <linux/edac_mce.h>
+#include <asm/mce.h>
+
+int edac_mce_enabled;
+EXPORT_SYMBOL_GPL(edac_mce_enabled);
+
+
+/*
+ * Extension interface
+ */
+
+static LIST_HEAD(edac_mce_list);
+static DEFINE_MUTEX(edac_mce_lock);
+
+int edac_mce_register(struct edac_mce *edac_mce)
+{
+ mutex_lock(&edac_mce_lock);
+ list_add_tail(&edac_mce->list, &edac_mce_list);
+ mutex_unlock(&edac_mce_lock);
+ return 0;
+}
+EXPORT_SYMBOL(edac_mce_register);
+
+void edac_mce_unregister(struct edac_mce *edac_mce)
+{
+ mutex_lock(&edac_mce_lock);
+ list_del(&edac_mce->list);
+ mutex_unlock(&edac_mce_lock);
+}
+EXPORT_SYMBOL(edac_mce_unregister);
+
+int edac_mce_parse(struct mce *mce)
+{
+ struct edac_mce *edac_mce;
+
+ list_for_each_entry(edac_mce, &edac_mce_list, list) {
+ if (edac_mce->check_error(edac_mce->priv, mce))
+ return 1;
+ }
+
+ /* Nobody queued the error */
+ return 0;
+}
+EXPORT_SYMBOL_GPL(edac_mce_parse);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("EDAC Driver for mcelog captured errors");
diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c
index adc10a2..996c1bd 100644
--- a/drivers/edac/i5000_edac.c
+++ b/drivers/edac/i5000_edac.c
@@ -774,7 +774,7 @@
static void i5000_check_error(struct mem_ctl_info *mci)
{
struct i5000_error_info info;
- debugf4("MC%d: " __FILE__ ": %s()\n", mci->mc_idx, __func__);
+ debugf4("MC%d: %s: %s()\n", mci->mc_idx, __FILE__, __func__);
i5000_get_error_info(mci, &info);
i5000_process_error_info(mci, &info, 1);
}
@@ -1353,8 +1353,8 @@
int num_dimms_per_channel;
int num_csrows;
- debugf0("MC: " __FILE__ ": %s(), pdev bus %u dev=0x%x fn=0x%x\n",
- __func__,
+ debugf0("MC: %s: %s(), pdev bus %u dev=0x%x fn=0x%x\n",
+ __FILE__, __func__,
pdev->bus->number,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
@@ -1389,7 +1389,7 @@
return -ENOMEM;
kobject_get(&mci->edac_mci_kobj);
- debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
+ debugf0("MC: %s: %s(): mci = %p\n", __FILE__, __func__, mci);
mci->dev = &pdev->dev; /* record ptr to the generic device */
@@ -1432,8 +1432,8 @@
/* add this new MC control structure to EDAC's list of MCs */
if (edac_mc_add_mc(mci)) {
- debugf0("MC: " __FILE__
- ": %s(): failed edac_mc_add_mc()\n", __func__);
+ debugf0("MC: %s: %s(): failed edac_mc_add_mc()\n",
+ __FILE__, __func__);
/* FIXME: perhaps some code should go here that disables error
* reporting if we just enabled it
*/
@@ -1478,7 +1478,7 @@
{
int rc;
- debugf0("MC: " __FILE__ ": %s()\n", __func__);
+ debugf0("MC: %s: %s()\n", __FILE__, __func__);
/* wake up device */
rc = pci_enable_device(pdev);
@@ -1497,7 +1497,7 @@
{
struct mem_ctl_info *mci;
- debugf0(__FILE__ ": %s()\n", __func__);
+ debugf0("%s: %s()\n", __FILE__, __func__);
if (i5000_pci)
edac_pci_release_generic_ctl(i5000_pci);
@@ -1544,7 +1544,7 @@
{
int pci_rc;
- debugf2("MC: " __FILE__ ": %s()\n", __func__);
+ debugf2("MC: %s: %s()\n", __FILE__, __func__);
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
@@ -1560,7 +1560,7 @@
*/
static void __exit i5000_exit(void)
{
- debugf2("MC: " __FILE__ ": %s()\n", __func__);
+ debugf2("MC: %s: %s()\n", __FILE__, __func__);
pci_unregister_driver(&i5000_driver);
}
diff --git a/drivers/edac/i5400_edac.c b/drivers/edac/i5400_edac.c
index f99d106..010c1d6 100644
--- a/drivers/edac/i5400_edac.c
+++ b/drivers/edac/i5400_edac.c
@@ -694,7 +694,7 @@
static void i5400_check_error(struct mem_ctl_info *mci)
{
struct i5400_error_info info;
- debugf4("MC%d: " __FILE__ ": %s()\n", mci->mc_idx, __func__);
+ debugf4("MC%d: %s: %s()\n", mci->mc_idx, __FILE__, __func__);
i5400_get_error_info(mci, &info);
i5400_process_error_info(mci, &info);
}
@@ -1227,8 +1227,8 @@
if (dev_idx >= ARRAY_SIZE(i5400_devs))
return -EINVAL;
- debugf0("MC: " __FILE__ ": %s(), pdev bus %u dev=0x%x fn=0x%x\n",
- __func__,
+ debugf0("MC: %s: %s(), pdev bus %u dev=0x%x fn=0x%x\n",
+ __FILE__, __func__,
pdev->bus->number,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
@@ -1256,7 +1256,7 @@
if (mci == NULL)
return -ENOMEM;
- debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
+ debugf0("MC: %s: %s(): mci = %p\n", __FILE__, __func__, mci);
mci->dev = &pdev->dev; /* record ptr to the generic device */
@@ -1299,8 +1299,8 @@
/* add this new MC control structure to EDAC's list of MCs */
if (edac_mc_add_mc(mci)) {
- debugf0("MC: " __FILE__
- ": %s(): failed edac_mc_add_mc()\n", __func__);
+ debugf0("MC: %s: %s(): failed edac_mc_add_mc()\n",
+ __FILE__, __func__);
/* FIXME: perhaps some code should go here that disables error
* reporting if we just enabled it
*/
@@ -1344,7 +1344,7 @@
{
int rc;
- debugf0("MC: " __FILE__ ": %s()\n", __func__);
+ debugf0("MC: %s: %s()\n", __FILE__, __func__);
/* wake up device */
rc = pci_enable_device(pdev);
@@ -1363,7 +1363,7 @@
{
struct mem_ctl_info *mci;
- debugf0(__FILE__ ": %s()\n", __func__);
+ debugf0("%s: %s()\n", __FILE__, __func__);
if (i5400_pci)
edac_pci_release_generic_ctl(i5400_pci);
@@ -1409,7 +1409,7 @@
{
int pci_rc;
- debugf2("MC: " __FILE__ ": %s()\n", __func__);
+ debugf2("MC: %s: %s()\n", __FILE__, __func__);
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
@@ -1425,7 +1425,7 @@
*/
static void __exit i5400_exit(void)
{
- debugf2("MC: " __FILE__ ": %s()\n", __func__);
+ debugf2("MC: %s: %s()\n", __FILE__, __func__);
pci_unregister_driver(&i5400_driver);
}
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
new file mode 100644
index 0000000..cc9357d
--- /dev/null
+++ b/drivers/edac/i7core_edac.c
@@ -0,0 +1,2105 @@
+/* Intel i7 core/Nehalem Memory Controller kernel module
+ *
+ * This driver supports yhe memory controllers found on the Intel
+ * processor families i7core, i7core 7xx/8xx, i5core, Xeon 35xx,
+ * Xeon 55xx and Xeon 56xx also known as Nehalem, Nehalem-EP, Lynnfield
+ * and Westmere-EP.
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2 only.
+ *
+ * Copyright (c) 2009-2010 by:
+ * Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * Red Hat Inc. http://www.redhat.com
+ *
+ * Forked and adapted from the i5400_edac driver
+ *
+ * Based on the following public Intel datasheets:
+ * Intel Core i7 Processor Extreme Edition and Intel Core i7 Processor
+ * Datasheet, Volume 2:
+ * http://download.intel.com/design/processor/datashts/320835.pdf
+ * Intel Xeon Processor 5500 Series Datasheet Volume 2
+ * http://www.intel.com/Assets/PDF/datasheet/321322.pdf
+ * also available at:
+ * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/edac.h>
+#include <linux/mmzone.h>
+#include <linux/edac_mce.h>
+#include <linux/smp.h>
+#include <asm/processor.h>
+
+#include "edac_core.h"
+
+/*
+ * This is used for Nehalem-EP and Nehalem-EX devices, where the non-core
+ * registers start at bus 255, and are not reported by BIOS.
+ * We currently find devices with only 2 sockets. In order to support more QPI
+ * Quick Path Interconnect, just increment this number.
+ */
+#define MAX_SOCKET_BUSES 2
+
+
+/*
+ * Alter this version for the module when modifications are made
+ */
+#define I7CORE_REVISION " Ver: 1.0.0 " __DATE__
+#define EDAC_MOD_STR "i7core_edac"
+
+/*
+ * Debug macros
+ */
+#define i7core_printk(level, fmt, arg...) \
+ edac_printk(level, "i7core", fmt, ##arg)
+
+#define i7core_mc_printk(mci, level, fmt, arg...) \
+ edac_mc_chipset_printk(mci, level, "i7core", fmt, ##arg)
+
+/*
+ * i7core Memory Controller Registers
+ */
+
+ /* OFFSETS for Device 0 Function 0 */
+
+#define MC_CFG_CONTROL 0x90
+
+ /* OFFSETS for Device 3 Function 0 */
+
+#define MC_CONTROL 0x48
+#define MC_STATUS 0x4c
+#define MC_MAX_DOD 0x64
+
+/*
+ * OFFSETS for Device 3 Function 4, as inicated on Xeon 5500 datasheet:
+ * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
+ */
+
+#define MC_TEST_ERR_RCV1 0x60
+ #define DIMM2_COR_ERR(r) ((r) & 0x7fff)
+
+#define MC_TEST_ERR_RCV0 0x64
+ #define DIMM1_COR_ERR(r) (((r) >> 16) & 0x7fff)
+ #define DIMM0_COR_ERR(r) ((r) & 0x7fff)
+
+/* OFFSETS for Device 3 Function 2, as inicated on Xeon 5500 datasheet */
+#define MC_COR_ECC_CNT_0 0x80
+#define MC_COR_ECC_CNT_1 0x84
+#define MC_COR_ECC_CNT_2 0x88
+#define MC_COR_ECC_CNT_3 0x8c
+#define MC_COR_ECC_CNT_4 0x90
+#define MC_COR_ECC_CNT_5 0x94
+
+#define DIMM_TOP_COR_ERR(r) (((r) >> 16) & 0x7fff)
+#define DIMM_BOT_COR_ERR(r) ((r) & 0x7fff)
+
+
+ /* OFFSETS for Devices 4,5 and 6 Function 0 */
+
+#define MC_CHANNEL_DIMM_INIT_PARAMS 0x58
+ #define THREE_DIMMS_PRESENT (1 << 24)
+ #define SINGLE_QUAD_RANK_PRESENT (1 << 23)
+ #define QUAD_RANK_PRESENT (1 << 22)
+ #define REGISTERED_DIMM (1 << 15)
+
+#define MC_CHANNEL_MAPPER 0x60
+ #define RDLCH(r, ch) ((((r) >> (3 + (ch * 6))) & 0x07) - 1)
+ #define WRLCH(r, ch) ((((r) >> (ch * 6)) & 0x07) - 1)
+
+#define MC_CHANNEL_RANK_PRESENT 0x7c
+ #define RANK_PRESENT_MASK 0xffff
+
+#define MC_CHANNEL_ADDR_MATCH 0xf0
+#define MC_CHANNEL_ERROR_MASK 0xf8
+#define MC_CHANNEL_ERROR_INJECT 0xfc
+ #define INJECT_ADDR_PARITY 0x10
+ #define INJECT_ECC 0x08
+ #define MASK_CACHELINE 0x06
+ #define MASK_FULL_CACHELINE 0x06
+ #define MASK_MSB32_CACHELINE 0x04
+ #define MASK_LSB32_CACHELINE 0x02
+ #define NO_MASK_CACHELINE 0x00
+ #define REPEAT_EN 0x01
+
+ /* OFFSETS for Devices 4,5 and 6 Function 1 */
+
+#define MC_DOD_CH_DIMM0 0x48
+#define MC_DOD_CH_DIMM1 0x4c
+#define MC_DOD_CH_DIMM2 0x50
+ #define RANKOFFSET_MASK ((1 << 12) | (1 << 11) | (1 << 10))
+ #define RANKOFFSET(x) ((x & RANKOFFSET_MASK) >> 10)
+ #define DIMM_PRESENT_MASK (1 << 9)
+ #define DIMM_PRESENT(x) (((x) & DIMM_PRESENT_MASK) >> 9)
+ #define MC_DOD_NUMBANK_MASK ((1 << 8) | (1 << 7))
+ #define MC_DOD_NUMBANK(x) (((x) & MC_DOD_NUMBANK_MASK) >> 7)
+ #define MC_DOD_NUMRANK_MASK ((1 << 6) | (1 << 5))
+ #define MC_DOD_NUMRANK(x) (((x) & MC_DOD_NUMRANK_MASK) >> 5)
+ #define MC_DOD_NUMROW_MASK ((1 << 4) | (1 << 3) | (1 << 2))
+ #define MC_DOD_NUMROW(x) (((x) & MC_DOD_NUMROW_MASK) >> 2)
+ #define MC_DOD_NUMCOL_MASK 3
+ #define MC_DOD_NUMCOL(x) ((x) & MC_DOD_NUMCOL_MASK)
+
+#define MC_RANK_PRESENT 0x7c
+
+#define MC_SAG_CH_0 0x80
+#define MC_SAG_CH_1 0x84
+#define MC_SAG_CH_2 0x88
+#define MC_SAG_CH_3 0x8c
+#define MC_SAG_CH_4 0x90
+#define MC_SAG_CH_5 0x94
+#define MC_SAG_CH_6 0x98
+#define MC_SAG_CH_7 0x9c
+
+#define MC_RIR_LIMIT_CH_0 0x40
+#define MC_RIR_LIMIT_CH_1 0x44
+#define MC_RIR_LIMIT_CH_2 0x48
+#define MC_RIR_LIMIT_CH_3 0x4C
+#define MC_RIR_LIMIT_CH_4 0x50
+#define MC_RIR_LIMIT_CH_5 0x54
+#define MC_RIR_LIMIT_CH_6 0x58
+#define MC_RIR_LIMIT_CH_7 0x5C
+#define MC_RIR_LIMIT_MASK ((1 << 10) - 1)
+
+#define MC_RIR_WAY_CH 0x80
+ #define MC_RIR_WAY_OFFSET_MASK (((1 << 14) - 1) & ~0x7)
+ #define MC_RIR_WAY_RANK_MASK 0x7
+
+/*
+ * i7core structs
+ */
+
+#define NUM_CHANS 3
+#define MAX_DIMMS 3 /* Max DIMMS per channel */
+#define MAX_MCR_FUNC 4
+#define MAX_CHAN_FUNC 3
+
+struct i7core_info {
+ u32 mc_control;
+ u32 mc_status;
+ u32 max_dod;
+ u32 ch_map;
+};
+
+
+struct i7core_inject {
+ int enable;
+
+ u32 section;
+ u32 type;
+ u32 eccmask;
+
+ /* Error address mask */
+ int channel, dimm, rank, bank, page, col;
+};
+
+struct i7core_channel {
+ u32 ranks;
+ u32 dimms;
+};
+
+struct pci_id_descr {
+ int dev;
+ int func;
+ int dev_id;
+ int optional;
+};
+
+struct pci_id_table {
+ struct pci_id_descr *descr;
+ int n_devs;
+};
+
+struct i7core_dev {
+ struct list_head list;
+ u8 socket;
+ struct pci_dev **pdev;
+ int n_devs;
+ struct mem_ctl_info *mci;
+};
+
+struct i7core_pvt {
+ struct pci_dev *pci_noncore;
+ struct pci_dev *pci_mcr[MAX_MCR_FUNC + 1];
+ struct pci_dev *pci_ch[NUM_CHANS][MAX_CHAN_FUNC + 1];
+
+ struct i7core_dev *i7core_dev;
+
+ struct i7core_info info;
+ struct i7core_inject inject;
+ struct i7core_channel channel[NUM_CHANS];
+
+ int channels; /* Number of active channels */
+
+ int ce_count_available;
+ int csrow_map[NUM_CHANS][MAX_DIMMS];
+
+ /* ECC corrected errors counts per udimm */
+ unsigned long udimm_ce_count[MAX_DIMMS];
+ int udimm_last_ce_count[MAX_DIMMS];
+ /* ECC corrected errors counts per rdimm */
+ unsigned long rdimm_ce_count[NUM_CHANS][MAX_DIMMS];
+ int rdimm_last_ce_count[NUM_CHANS][MAX_DIMMS];
+
+ unsigned int is_registered;
+
+ /* mcelog glue */
+ struct edac_mce edac_mce;
+
+ /* Fifo double buffers */
+ struct mce mce_entry[MCE_LOG_LEN];
+ struct mce mce_outentry[MCE_LOG_LEN];
+
+ /* Fifo in/out counters */
+ unsigned mce_in, mce_out;
+
+ /* Count indicator to show errors not got */
+ unsigned mce_overrun;
+};
+
+/* Static vars */
+static LIST_HEAD(i7core_edac_list);
+static DEFINE_MUTEX(i7core_edac_lock);
+
+#define PCI_DESCR(device, function, device_id) \
+ .dev = (device), \
+ .func = (function), \
+ .dev_id = (device_id)
+
+struct pci_id_descr pci_dev_descr_i7core_nehalem[] = {
+ /* Memory controller */
+ { PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_I7_MCR) },
+ { PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_I7_MC_TAD) },
+ /* Exists only for RDIMM */
+ { PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_I7_MC_RAS), .optional = 1 },
+ { PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_I7_MC_TEST) },
+
+ /* Channel 0 */
+ { PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH0_CTRL) },
+ { PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH0_ADDR) },
+ { PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH0_RANK) },
+ { PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH0_TC) },
+
+ /* Channel 1 */
+ { PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH1_CTRL) },
+ { PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH1_ADDR) },
+ { PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH1_RANK) },
+ { PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH1_TC) },
+
+ /* Channel 2 */
+ { PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH2_CTRL) },
+ { PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR) },
+ { PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK) },
+ { PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC) },
+
+ /* Generic Non-core registers */
+ /*
+ * This is the PCI device on i7core and on Xeon 35xx (8086:2c41)
+ * On Xeon 55xx, however, it has a different id (8086:2c40). So,
+ * the probing code needs to test for the other address in case of
+ * failure of this one
+ */
+ { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_I7_NONCORE) },
+
+};
+
+struct pci_id_descr pci_dev_descr_lynnfield[] = {
+ { PCI_DESCR( 3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR) },
+ { PCI_DESCR( 3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD) },
+ { PCI_DESCR( 3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST) },
+
+ { PCI_DESCR( 4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL) },
+ { PCI_DESCR( 4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR) },
+ { PCI_DESCR( 4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK) },
+ { PCI_DESCR( 4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC) },
+
+ { PCI_DESCR( 5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL) },
+ { PCI_DESCR( 5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR) },
+ { PCI_DESCR( 5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK) },
+ { PCI_DESCR( 5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC) },
+
+ /*
+ * This is the PCI device has an alternate address on some
+ * processors like Core i7 860
+ */
+ { PCI_DESCR( 0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE) },
+};
+
+struct pci_id_descr pci_dev_descr_i7core_westmere[] = {
+ /* Memory controller */
+ { PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2) },
+ { PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2) },
+ /* Exists only for RDIMM */
+ { PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2), .optional = 1 },
+ { PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2) },
+
+ /* Channel 0 */
+ { PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2) },
+ { PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2) },
+ { PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2) },
+ { PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2) },
+
+ /* Channel 1 */
+ { PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2) },
+ { PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2) },
+ { PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2) },
+ { PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2) },
+
+ /* Channel 2 */
+ { PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2) },
+ { PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2) },
+ { PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2) },
+ { PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2) },
+
+ /* Generic Non-core registers */
+ { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2) },
+
+};
+
+#define PCI_ID_TABLE_ENTRY(A) { A, ARRAY_SIZE(A) }
+struct pci_id_table pci_dev_table[] = {
+ PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_nehalem),
+ PCI_ID_TABLE_ENTRY(pci_dev_descr_lynnfield),
+ PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_westmere),
+};
+
+/*
+ * pci_device_id table for which devices we are looking for
+ */
+static const struct pci_device_id i7core_pci_tbl[] __devinitdata = {
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_X58_HUB_MGMT)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0)},
+ {0,} /* 0 terminated list. */
+};
+
+static struct edac_pci_ctl_info *i7core_pci;
+
+/****************************************************************************
+ Anciliary status routines
+ ****************************************************************************/
+
+ /* MC_CONTROL bits */
+#define CH_ACTIVE(pvt, ch) ((pvt)->info.mc_control & (1 << (8 + ch)))
+#define ECCx8(pvt) ((pvt)->info.mc_control & (1 << 1))
+
+ /* MC_STATUS bits */
+#define ECC_ENABLED(pvt) ((pvt)->info.mc_status & (1 << 4))
+#define CH_DISABLED(pvt, ch) ((pvt)->info.mc_status & (1 << ch))
+
+ /* MC_MAX_DOD read functions */
+static inline int numdimms(u32 dimms)
+{
+ return (dimms & 0x3) + 1;
+}
+
+static inline int numrank(u32 rank)
+{
+ static int ranks[4] = { 1, 2, 4, -EINVAL };
+
+ return ranks[rank & 0x3];
+}
+
+static inline int numbank(u32 bank)
+{
+ static int banks[4] = { 4, 8, 16, -EINVAL };
+
+ return banks[bank & 0x3];
+}
+
+static inline int numrow(u32 row)
+{
+ static int rows[8] = {
+ 1 << 12, 1 << 13, 1 << 14, 1 << 15,
+ 1 << 16, -EINVAL, -EINVAL, -EINVAL,
+ };
+
+ return rows[row & 0x7];
+}
+
+static inline int numcol(u32 col)
+{
+ static int cols[8] = {
+ 1 << 10, 1 << 11, 1 << 12, -EINVAL,
+ };
+ return cols[col & 0x3];
+}
+
+static struct i7core_dev *get_i7core_dev(u8 socket)
+{
+ struct i7core_dev *i7core_dev;
+
+ list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
+ if (i7core_dev->socket == socket)
+ return i7core_dev;
+ }
+
+ return NULL;
+}
+
+/****************************************************************************
+ Memory check routines
+ ****************************************************************************/
+static struct pci_dev *get_pdev_slot_func(u8 socket, unsigned slot,
+ unsigned func)
+{
+ struct i7core_dev *i7core_dev = get_i7core_dev(socket);
+ int i;
+
+ if (!i7core_dev)
+ return NULL;
+
+ for (i = 0; i < i7core_dev->n_devs; i++) {
+ if (!i7core_dev->pdev[i])
+ continue;
+
+ if (PCI_SLOT(i7core_dev->pdev[i]->devfn) == slot &&
+ PCI_FUNC(i7core_dev->pdev[i]->devfn) == func) {
+ return i7core_dev->pdev[i];
+ }
+ }
+
+ return NULL;
+}
+
+/**
+ * i7core_get_active_channels() - gets the number of channels and csrows
+ * @socket: Quick Path Interconnect socket
+ * @channels: Number of channels that will be returned
+ * @csrows: Number of csrows found
+ *
+ * Since EDAC core needs to know in advance the number of available channels
+ * and csrows, in order to allocate memory for csrows/channels, it is needed
+ * to run two similar steps. At the first step, implemented on this function,
+ * it checks the number of csrows/channels present at one socket.
+ * this is used in order to properly allocate the size of mci components.
+ *
+ * It should be noticed that none of the current available datasheets explain
+ * or even mention how csrows are seen by the memory controller. So, we need
+ * to add a fake description for csrows.
+ * So, this driver is attributing one DIMM memory for one csrow.
+ */
+static int i7core_get_active_channels(u8 socket, unsigned *channels,
+ unsigned *csrows)
+{
+ struct pci_dev *pdev = NULL;
+ int i, j;
+ u32 status, control;
+
+ *channels = 0;
+ *csrows = 0;
+
+ pdev = get_pdev_slot_func(socket, 3, 0);
+ if (!pdev) {
+ i7core_printk(KERN_ERR, "Couldn't find socket %d fn 3.0!!!\n",
+ socket);
+ return -ENODEV;
+ }
+
+ /* Device 3 function 0 reads */
+ pci_read_config_dword(pdev, MC_STATUS, &status);
+ pci_read_config_dword(pdev, MC_CONTROL, &control);
+
+ for (i = 0; i < NUM_CHANS; i++) {
+ u32 dimm_dod[3];
+ /* Check if the channel is active */
+ if (!(control & (1 << (8 + i))))
+ continue;
+
+ /* Check if the channel is disabled */
+ if (status & (1 << i))
+ continue;
+
+ pdev = get_pdev_slot_func(socket, i + 4, 1);
+ if (!pdev) {
+ i7core_printk(KERN_ERR, "Couldn't find socket %d "
+ "fn %d.%d!!!\n",
+ socket, i + 4, 1);
+ return -ENODEV;
+ }
+ /* Devices 4-6 function 1 */
+ pci_read_config_dword(pdev,
+ MC_DOD_CH_DIMM0, &dimm_dod[0]);
+ pci_read_config_dword(pdev,
+ MC_DOD_CH_DIMM1, &dimm_dod[1]);
+ pci_read_config_dword(pdev,
+ MC_DOD_CH_DIMM2, &dimm_dod[2]);
+
+ (*channels)++;
+
+ for (j = 0; j < 3; j++) {
+ if (!DIMM_PRESENT(dimm_dod[j]))
+ continue;
+ (*csrows)++;
+ }
+ }
+
+ debugf0("Number of active channels on socket %d: %d\n",
+ socket, *channels);
+
+ return 0;
+}
+
+static int get_dimm_config(struct mem_ctl_info *mci, int *csrow)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ struct csrow_info *csr;
+ struct pci_dev *pdev;
+ int i, j;
+ unsigned long last_page = 0;
+ enum edac_type mode;
+ enum mem_type mtype;
+
+ /* Get data from the MC register, function 0 */
+ pdev = pvt->pci_mcr[0];
+ if (!pdev)
+ return -ENODEV;
+
+ /* Device 3 function 0 reads */
+ pci_read_config_dword(pdev, MC_CONTROL, &pvt->info.mc_control);
+ pci_read_config_dword(pdev, MC_STATUS, &pvt->info.mc_status);
+ pci_read_config_dword(pdev, MC_MAX_DOD, &pvt->info.max_dod);
+ pci_read_config_dword(pdev, MC_CHANNEL_MAPPER, &pvt->info.ch_map);
+
+ debugf0("QPI %d control=0x%08x status=0x%08x dod=0x%08x map=0x%08x\n",
+ pvt->i7core_dev->socket, pvt->info.mc_control, pvt->info.mc_status,
+ pvt->info.max_dod, pvt->info.ch_map);
+
+ if (ECC_ENABLED(pvt)) {
+ debugf0("ECC enabled with x%d SDCC\n", ECCx8(pvt) ? 8 : 4);
+ if (ECCx8(pvt))
+ mode = EDAC_S8ECD8ED;
+ else
+ mode = EDAC_S4ECD4ED;
+ } else {
+ debugf0("ECC disabled\n");
+ mode = EDAC_NONE;
+ }
+
+ /* FIXME: need to handle the error codes */
+ debugf0("DOD Max limits: DIMMS: %d, %d-ranked, %d-banked "
+ "x%x x 0x%x\n",
+ numdimms(pvt->info.max_dod),
+ numrank(pvt->info.max_dod >> 2),
+ numbank(pvt->info.max_dod >> 4),
+ numrow(pvt->info.max_dod >> 6),
+ numcol(pvt->info.max_dod >> 9));
+
+ for (i = 0; i < NUM_CHANS; i++) {
+ u32 data, dimm_dod[3], value[8];
+
+ if (!pvt->pci_ch[i][0])
+ continue;
+
+ if (!CH_ACTIVE(pvt, i)) {
+ debugf0("Channel %i is not active\n", i);
+ continue;
+ }
+ if (CH_DISABLED(pvt, i)) {
+ debugf0("Channel %i is disabled\n", i);
+ continue;
+ }
+
+ /* Devices 4-6 function 0 */
+ pci_read_config_dword(pvt->pci_ch[i][0],
+ MC_CHANNEL_DIMM_INIT_PARAMS, &data);
+
+ pvt->channel[i].ranks = (data & QUAD_RANK_PRESENT) ?
+ 4 : 2;
+
+ if (data & REGISTERED_DIMM)
+ mtype = MEM_RDDR3;
+ else
+ mtype = MEM_DDR3;
+#if 0
+ if (data & THREE_DIMMS_PRESENT)
+ pvt->channel[i].dimms = 3;
+ else if (data & SINGLE_QUAD_RANK_PRESENT)
+ pvt->channel[i].dimms = 1;
+ else
+ pvt->channel[i].dimms = 2;
+#endif
+
+ /* Devices 4-6 function 1 */
+ pci_read_config_dword(pvt->pci_ch[i][1],
+ MC_DOD_CH_DIMM0, &dimm_dod[0]);
+ pci_read_config_dword(pvt->pci_ch[i][1],
+ MC_DOD_CH_DIMM1, &dimm_dod[1]);
+ pci_read_config_dword(pvt->pci_ch[i][1],
+ MC_DOD_CH_DIMM2, &dimm_dod[2]);
+
+ debugf0("Ch%d phy rd%d, wr%d (0x%08x): "
+ "%d ranks, %cDIMMs\n",
+ i,
+ RDLCH(pvt->info.ch_map, i), WRLCH(pvt->info.ch_map, i),
+ data,
+ pvt->channel[i].ranks,
+ (data & REGISTERED_DIMM) ? 'R' : 'U');
+
+ for (j = 0; j < 3; j++) {
+ u32 banks, ranks, rows, cols;
+ u32 size, npages;
+
+ if (!DIMM_PRESENT(dimm_dod[j]))
+ continue;
+
+ banks = numbank(MC_DOD_NUMBANK(dimm_dod[j]));
+ ranks = numrank(MC_DOD_NUMRANK(dimm_dod[j]));
+ rows = numrow(MC_DOD_NUMROW(dimm_dod[j]));
+ cols = numcol(MC_DOD_NUMCOL(dimm_dod[j]));
+
+ /* DDR3 has 8 I/O banks */
+ size = (rows * cols * banks * ranks) >> (20 - 3);
+
+ pvt->channel[i].dimms++;
+
+ debugf0("\tdimm %d %d Mb offset: %x, "
+ "bank: %d, rank: %d, row: %#x, col: %#x\n",
+ j, size,
+ RANKOFFSET(dimm_dod[j]),
+ banks, ranks, rows, cols);
+
+#if PAGE_SHIFT > 20
+ npages = size >> (PAGE_SHIFT - 20);
+#else
+ npages = size << (20 - PAGE_SHIFT);
+#endif
+
+ csr = &mci->csrows[*csrow];
+ csr->first_page = last_page + 1;
+ last_page += npages;
+ csr->last_page = last_page;
+ csr->nr_pages = npages;
+
+ csr->page_mask = 0;
+ csr->grain = 8;
+ csr->csrow_idx = *csrow;
+ csr->nr_channels = 1;
+
+ csr->channels[0].chan_idx = i;
+ csr->channels[0].ce_count = 0;
+
+ pvt->csrow_map[i][j] = *csrow;
+
+ switch (banks) {
+ case 4:
+ csr->dtype = DEV_X4;
+ break;
+ case 8:
+ csr->dtype = DEV_X8;
+ break;
+ case 16:
+ csr->dtype = DEV_X16;
+ break;
+ default:
+ csr->dtype = DEV_UNKNOWN;
+ }
+
+ csr->edac_mode = mode;
+ csr->mtype = mtype;
+
+ (*csrow)++;
+ }
+
+ pci_read_config_dword(pdev, MC_SAG_CH_0, &value[0]);
+ pci_read_config_dword(pdev, MC_SAG_CH_1, &value[1]);
+ pci_read_config_dword(pdev, MC_SAG_CH_2, &value[2]);
+ pci_read_config_dword(pdev, MC_SAG_CH_3, &value[3]);
+ pci_read_config_dword(pdev, MC_SAG_CH_4, &value[4]);
+ pci_read_config_dword(pdev, MC_SAG_CH_5, &value[5]);
+ pci_read_config_dword(pdev, MC_SAG_CH_6, &value[6]);
+ pci_read_config_dword(pdev, MC_SAG_CH_7, &value[7]);
+ debugf1("\t[%i] DIVBY3\tREMOVED\tOFFSET\n", i);
+ for (j = 0; j < 8; j++)
+ debugf1("\t\t%#x\t%#x\t%#x\n",
+ (value[j] >> 27) & 0x1,
+ (value[j] >> 24) & 0x7,
+ (value[j] && ((1 << 24) - 1)));
+ }
+
+ return 0;
+}
+
+/****************************************************************************
+ Error insertion routines
+ ****************************************************************************/
+
+/* The i7core has independent error injection features per channel.
+ However, to have a simpler code, we don't allow enabling error injection
+ on more than one channel.
+ Also, since a change at an inject parameter will be applied only at enable,
+ we're disabling error injection on all write calls to the sysfs nodes that
+ controls the error code injection.
+ */
+static int disable_inject(struct mem_ctl_info *mci)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+
+ pvt->inject.enable = 0;
+
+ if (!pvt->pci_ch[pvt->inject.channel][0])
+ return -ENODEV;
+
+ pci_write_config_dword(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ERROR_INJECT, 0);
+
+ return 0;
+}
+
+/*
+ * i7core inject inject.section
+ *
+ * accept and store error injection inject.section value
+ * bit 0 - refers to the lower 32-byte half cacheline
+ * bit 1 - refers to the upper 32-byte half cacheline
+ */
+static ssize_t i7core_inject_section_store(struct mem_ctl_info *mci,
+ const char *data, size_t count)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ unsigned long value;
+ int rc;
+
+ if (pvt->inject.enable)
+ disable_inject(mci);
+
+ rc = strict_strtoul(data, 10, &value);
+ if ((rc < 0) || (value > 3))
+ return -EIO;
+
+ pvt->inject.section = (u32) value;
+ return count;
+}
+
+static ssize_t i7core_inject_section_show(struct mem_ctl_info *mci,
+ char *data)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ return sprintf(data, "0x%08x\n", pvt->inject.section);
+}
+
+/*
+ * i7core inject.type
+ *
+ * accept and store error injection inject.section value
+ * bit 0 - repeat enable - Enable error repetition
+ * bit 1 - inject ECC error
+ * bit 2 - inject parity error
+ */
+static ssize_t i7core_inject_type_store(struct mem_ctl_info *mci,
+ const char *data, size_t count)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ unsigned long value;
+ int rc;
+
+ if (pvt->inject.enable)
+ disable_inject(mci);
+
+ rc = strict_strtoul(data, 10, &value);
+ if ((rc < 0) || (value > 7))
+ return -EIO;
+
+ pvt->inject.type = (u32) value;
+ return count;
+}
+
+static ssize_t i7core_inject_type_show(struct mem_ctl_info *mci,
+ char *data)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ return sprintf(data, "0x%08x\n", pvt->inject.type);
+}
+
+/*
+ * i7core_inject_inject.eccmask_store
+ *
+ * The type of error (UE/CE) will depend on the inject.eccmask value:
+ * Any bits set to a 1 will flip the corresponding ECC bit
+ * Correctable errors can be injected by flipping 1 bit or the bits within
+ * a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or
+ * 23:16 and 31:24). Flipping bits in two symbol pairs will cause an
+ * uncorrectable error to be injected.
+ */
+static ssize_t i7core_inject_eccmask_store(struct mem_ctl_info *mci,
+ const char *data, size_t count)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ unsigned long value;
+ int rc;
+
+ if (pvt->inject.enable)
+ disable_inject(mci);
+
+ rc = strict_strtoul(data, 10, &value);
+ if (rc < 0)
+ return -EIO;
+
+ pvt->inject.eccmask = (u32) value;
+ return count;
+}
+
+static ssize_t i7core_inject_eccmask_show(struct mem_ctl_info *mci,
+ char *data)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ return sprintf(data, "0x%08x\n", pvt->inject.eccmask);
+}
+
+/*
+ * i7core_addrmatch
+ *
+ * The type of error (UE/CE) will depend on the inject.eccmask value:
+ * Any bits set to a 1 will flip the corresponding ECC bit
+ * Correctable errors can be injected by flipping 1 bit or the bits within
+ * a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or
+ * 23:16 and 31:24). Flipping bits in two symbol pairs will cause an
+ * uncorrectable error to be injected.
+ */
+
+#define DECLARE_ADDR_MATCH(param, limit) \
+static ssize_t i7core_inject_store_##param( \
+ struct mem_ctl_info *mci, \
+ const char *data, size_t count) \
+{ \
+ struct i7core_pvt *pvt; \
+ long value; \
+ int rc; \
+ \
+ debugf1("%s()\n", __func__); \
+ pvt = mci->pvt_info; \
+ \
+ if (pvt->inject.enable) \
+ disable_inject(mci); \
+ \
+ if (!strcasecmp(data, "any") || !strcasecmp(data, "any\n"))\
+ value = -1; \
+ else { \
+ rc = strict_strtoul(data, 10, &value); \
+ if ((rc < 0) || (value >= limit)) \
+ return -EIO; \
+ } \
+ \
+ pvt->inject.param = value; \
+ \
+ return count; \
+} \
+ \
+static ssize_t i7core_inject_show_##param( \
+ struct mem_ctl_info *mci, \
+ char *data) \
+{ \
+ struct i7core_pvt *pvt; \
+ \
+ pvt = mci->pvt_info; \
+ debugf1("%s() pvt=%p\n", __func__, pvt); \
+ if (pvt->inject.param < 0) \
+ return sprintf(data, "any\n"); \
+ else \
+ return sprintf(data, "%d\n", pvt->inject.param);\
+}
+
+#define ATTR_ADDR_MATCH(param) \
+ { \
+ .attr = { \
+ .name = #param, \
+ .mode = (S_IRUGO | S_IWUSR) \
+ }, \
+ .show = i7core_inject_show_##param, \
+ .store = i7core_inject_store_##param, \
+ }
+
+DECLARE_ADDR_MATCH(channel, 3);
+DECLARE_ADDR_MATCH(dimm, 3);
+DECLARE_ADDR_MATCH(rank, 4);
+DECLARE_ADDR_MATCH(bank, 32);
+DECLARE_ADDR_MATCH(page, 0x10000);
+DECLARE_ADDR_MATCH(col, 0x4000);
+
+static int write_and_test(struct pci_dev *dev, int where, u32 val)
+{
+ u32 read;
+ int count;
+
+ debugf0("setting pci %02x:%02x.%x reg=%02x value=%08x\n",
+ dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
+ where, val);
+
+ for (count = 0; count < 10; count++) {
+ if (count)
+ msleep(100);
+ pci_write_config_dword(dev, where, val);
+ pci_read_config_dword(dev, where, &read);
+
+ if (read == val)
+ return 0;
+ }
+
+ i7core_printk(KERN_ERR, "Error during set pci %02x:%02x.%x reg=%02x "
+ "write=%08x. Read=%08x\n",
+ dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
+ where, val, read);
+
+ return -EINVAL;
+}
+
+/*
+ * This routine prepares the Memory Controller for error injection.
+ * The error will be injected when some process tries to write to the
+ * memory that matches the given criteria.
+ * The criteria can be set in terms of a mask where dimm, rank, bank, page
+ * and col can be specified.
+ * A -1 value for any of the mask items will make the MCU to ignore
+ * that matching criteria for error injection.
+ *
+ * It should be noticed that the error will only happen after a write operation
+ * on a memory that matches the condition. if REPEAT_EN is not enabled at
+ * inject mask, then it will produce just one error. Otherwise, it will repeat
+ * until the injectmask would be cleaned.
+ *
+ * FIXME: This routine assumes that MAXNUMDIMMS value of MC_MAX_DOD
+ * is reliable enough to check if the MC is using the
+ * three channels. However, this is not clear at the datasheet.
+ */
+static ssize_t i7core_inject_enable_store(struct mem_ctl_info *mci,
+ const char *data, size_t count)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ u32 injectmask;
+ u64 mask = 0;
+ int rc;
+ long enable;
+
+ if (!pvt->pci_ch[pvt->inject.channel][0])
+ return 0;
+
+ rc = strict_strtoul(data, 10, &enable);
+ if ((rc < 0))
+ return 0;
+
+ if (enable) {
+ pvt->inject.enable = 1;
+ } else {
+ disable_inject(mci);
+ return count;
+ }
+
+ /* Sets pvt->inject.dimm mask */
+ if (pvt->inject.dimm < 0)
+ mask |= 1LL << 41;
+ else {
+ if (pvt->channel[pvt->inject.channel].dimms > 2)
+ mask |= (pvt->inject.dimm & 0x3LL) << 35;
+ else
+ mask |= (pvt->inject.dimm & 0x1LL) << 36;
+ }
+
+ /* Sets pvt->inject.rank mask */
+ if (pvt->inject.rank < 0)
+ mask |= 1LL << 40;
+ else {
+ if (pvt->channel[pvt->inject.channel].dimms > 2)
+ mask |= (pvt->inject.rank & 0x1LL) << 34;
+ else
+ mask |= (pvt->inject.rank & 0x3LL) << 34;
+ }
+
+ /* Sets pvt->inject.bank mask */
+ if (pvt->inject.bank < 0)
+ mask |= 1LL << 39;
+ else
+ mask |= (pvt->inject.bank & 0x15LL) << 30;
+
+ /* Sets pvt->inject.page mask */
+ if (pvt->inject.page < 0)
+ mask |= 1LL << 38;
+ else
+ mask |= (pvt->inject.page & 0xffff) << 14;
+
+ /* Sets pvt->inject.column mask */
+ if (pvt->inject.col < 0)
+ mask |= 1LL << 37;
+ else
+ mask |= (pvt->inject.col & 0x3fff);
+
+ /*
+ * bit 0: REPEAT_EN
+ * bits 1-2: MASK_HALF_CACHELINE
+ * bit 3: INJECT_ECC
+ * bit 4: INJECT_ADDR_PARITY
+ */
+
+ injectmask = (pvt->inject.type & 1) |
+ (pvt->inject.section & 0x3) << 1 |
+ (pvt->inject.type & 0x6) << (3 - 1);
+
+ /* Unlock writes to registers - this register is write only */
+ pci_write_config_dword(pvt->pci_noncore,
+ MC_CFG_CONTROL, 0x2);
+
+ write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ADDR_MATCH, mask);
+ write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ADDR_MATCH + 4, mask >> 32L);
+
+ write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ERROR_MASK, pvt->inject.eccmask);
+
+ write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ERROR_INJECT, injectmask);
+
+ /*
+ * This is something undocumented, based on my tests
+ * Without writing 8 to this register, errors aren't injected. Not sure
+ * why.
+ */
+ pci_write_config_dword(pvt->pci_noncore,
+ MC_CFG_CONTROL, 8);
+
+ debugf0("Error inject addr match 0x%016llx, ecc 0x%08x,"
+ " inject 0x%08x\n",
+ mask, pvt->inject.eccmask, injectmask);
+
+
+ return count;
+}
+
+static ssize_t i7core_inject_enable_show(struct mem_ctl_info *mci,
+ char *data)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ u32 injectmask;
+
+ if (!pvt->pci_ch[pvt->inject.channel][0])
+ return 0;
+
+ pci_read_config_dword(pvt->pci_ch[pvt->inject.channel][0],
+ MC_CHANNEL_ERROR_INJECT, &injectmask);
+
+ debugf0("Inject error read: 0x%018x\n", injectmask);
+
+ if (injectmask & 0x0c)
+ pvt->inject.enable = 1;
+
+ return sprintf(data, "%d\n", pvt->inject.enable);
+}
+
+#define DECLARE_COUNTER(param) \
+static ssize_t i7core_show_counter_##param( \
+ struct mem_ctl_info *mci, \
+ char *data) \
+{ \
+ struct i7core_pvt *pvt = mci->pvt_info; \
+ \
+ debugf1("%s() \n", __func__); \
+ if (!pvt->ce_count_available || (pvt->is_registered)) \
+ return sprintf(data, "data unavailable\n"); \
+ return sprintf(data, "%lu\n", \
+ pvt->udimm_ce_count[param]); \
+}
+
+#define ATTR_COUNTER(param) \
+ { \
+ .attr = { \
+ .name = __stringify(udimm##param), \
+ .mode = (S_IRUGO | S_IWUSR) \
+ }, \
+ .show = i7core_show_counter_##param \
+ }
+
+DECLARE_COUNTER(0);
+DECLARE_COUNTER(1);
+DECLARE_COUNTER(2);
+
+/*
+ * Sysfs struct
+ */
+
+
+static struct mcidev_sysfs_attribute i7core_addrmatch_attrs[] = {
+ ATTR_ADDR_MATCH(channel),
+ ATTR_ADDR_MATCH(dimm),
+ ATTR_ADDR_MATCH(rank),
+ ATTR_ADDR_MATCH(bank),
+ ATTR_ADDR_MATCH(page),
+ ATTR_ADDR_MATCH(col),
+ { .attr = { .name = NULL } }
+};
+
+static struct mcidev_sysfs_group i7core_inject_addrmatch = {
+ .name = "inject_addrmatch",
+ .mcidev_attr = i7core_addrmatch_attrs,
+};
+
+static struct mcidev_sysfs_attribute i7core_udimm_counters_attrs[] = {
+ ATTR_COUNTER(0),
+ ATTR_COUNTER(1),
+ ATTR_COUNTER(2),
+};
+
+static struct mcidev_sysfs_group i7core_udimm_counters = {
+ .name = "all_channel_counts",
+ .mcidev_attr = i7core_udimm_counters_attrs,
+};
+
+static struct mcidev_sysfs_attribute i7core_sysfs_attrs[] = {
+ {
+ .attr = {
+ .name = "inject_section",
+ .mode = (S_IRUGO | S_IWUSR)
+ },
+ .show = i7core_inject_section_show,
+ .store = i7core_inject_section_store,
+ }, {
+ .attr = {
+ .name = "inject_type",
+ .mode = (S_IRUGO | S_IWUSR)
+ },
+ .show = i7core_inject_type_show,
+ .store = i7core_inject_type_store,
+ }, {
+ .attr = {
+ .name = "inject_eccmask",
+ .mode = (S_IRUGO | S_IWUSR)
+ },
+ .show = i7core_inject_eccmask_show,
+ .store = i7core_inject_eccmask_store,
+ }, {
+ .grp = &i7core_inject_addrmatch,
+ }, {
+ .attr = {
+ .name = "inject_enable",
+ .mode = (S_IRUGO | S_IWUSR)
+ },
+ .show = i7core_inject_enable_show,
+ .store = i7core_inject_enable_store,
+ },
+ { .attr = { .name = NULL } }, /* Reserved for udimm counters */
+ { .attr = { .name = NULL } }
+};
+
+/****************************************************************************
+ Device initialization routines: put/get, init/exit
+ ****************************************************************************/
+
+/*
+ * i7core_put_devices 'put' all the devices that we have
+ * reserved via 'get'
+ */
+static void i7core_put_devices(struct i7core_dev *i7core_dev)
+{
+ int i;
+
+ debugf0(__FILE__ ": %s()\n", __func__);
+ for (i = 0; i < i7core_dev->n_devs; i++) {
+ struct pci_dev *pdev = i7core_dev->pdev[i];
+ if (!pdev)
+ continue;
+ debugf0("Removing dev %02x:%02x.%d\n",
+ pdev->bus->number,
+ PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+ pci_dev_put(pdev);
+ }
+ kfree(i7core_dev->pdev);
+ list_del(&i7core_dev->list);
+ kfree(i7core_dev);
+}
+
+static void i7core_put_all_devices(void)
+{
+ struct i7core_dev *i7core_dev, *tmp;
+
+ list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list)
+ i7core_put_devices(i7core_dev);
+}
+
+static void __init i7core_xeon_pci_fixup(struct pci_id_table *table)
+{
+ struct pci_dev *pdev = NULL;
+ int i;
+ /*
+ * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core pci buses
+ * aren't announced by acpi. So, we need to use a legacy scan probing
+ * to detect them
+ */
+ while (table && table->descr) {
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL, table->descr[0].dev_id, NULL);
+ if (unlikely(!pdev)) {
+ for (i = 0; i < MAX_SOCKET_BUSES; i++)
+ pcibios_scan_specific_bus(255-i);
+ }
+ pci_dev_put(pdev);
+ table++;
+ }
+}
+
+static unsigned i7core_pci_lastbus(void)
+{
+ int last_bus = 0, bus;
+ struct pci_bus *b = NULL;
+
+ while ((b = pci_find_next_bus(b)) != NULL) {
+ bus = b->number;
+ debugf0("Found bus %d\n", bus);
+ if (bus > last_bus)
+ last_bus = bus;
+ }
+
+ debugf0("Last bus %d\n", last_bus);
+
+ return last_bus;
+}
+
+/*
+ * i7core_get_devices Find and perform 'get' operation on the MCH's
+ * device/functions we want to reference for this driver
+ *
+ * Need to 'get' device 16 func 1 and func 2
+ */
+int i7core_get_onedevice(struct pci_dev **prev, int devno,
+ struct pci_id_descr *dev_descr, unsigned n_devs,
+ unsigned last_bus)
+{
+ struct i7core_dev *i7core_dev;
+
+ struct pci_dev *pdev = NULL;
+ u8 bus = 0;
+ u8 socket = 0;
+
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ dev_descr->dev_id, *prev);
+
+ /*
+ * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs
+ * is at addr 8086:2c40, instead of 8086:2c41. So, we need
+ * to probe for the alternate address in case of failure
+ */
+ if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_I7_NONCORE && !pdev)
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT, *prev);
+
+ if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE && !pdev)
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT,
+ *prev);
+
+ if (!pdev) {
+ if (*prev) {
+ *prev = pdev;
+ return 0;
+ }
+
+ if (dev_descr->optional)
+ return 0;
+
+ if (devno == 0)
+ return -ENODEV;
+
+ i7core_printk(KERN_ERR,
+ "Device not found: dev %02x.%d PCI ID %04x:%04x\n",
+ dev_descr->dev, dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+ /* End of list, leave */
+ return -ENODEV;
+ }
+ bus = pdev->bus->number;
+
+ socket = last_bus - bus;
+
+ i7core_dev = get_i7core_dev(socket);
+ if (!i7core_dev) {
+ i7core_dev = kzalloc(sizeof(*i7core_dev), GFP_KERNEL);
+ if (!i7core_dev)
+ return -ENOMEM;
+ i7core_dev->pdev = kzalloc(sizeof(*i7core_dev->pdev) * n_devs,
+ GFP_KERNEL);
+ if (!i7core_dev->pdev) {
+ kfree(i7core_dev);
+ return -ENOMEM;
+ }
+ i7core_dev->socket = socket;
+ i7core_dev->n_devs = n_devs;
+ list_add_tail(&i7core_dev->list, &i7core_edac_list);
+ }
+
+ if (i7core_dev->pdev[devno]) {
+ i7core_printk(KERN_ERR,
+ "Duplicated device for "
+ "dev %02x:%02x.%d PCI ID %04x:%04x\n",
+ bus, dev_descr->dev, dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+ pci_dev_put(pdev);
+ return -ENODEV;
+ }
+
+ i7core_dev->pdev[devno] = pdev;
+
+ /* Sanity check */
+ if (unlikely(PCI_SLOT(pdev->devfn) != dev_descr->dev ||
+ PCI_FUNC(pdev->devfn) != dev_descr->func)) {
+ i7core_printk(KERN_ERR,
+ "Device PCI ID %04x:%04x "
+ "has dev %02x:%02x.%d instead of dev %02x:%02x.%d\n",
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id,
+ bus, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+ bus, dev_descr->dev, dev_descr->func);
+ return -ENODEV;
+ }
+
+ /* Be sure that the device is enabled */
+ if (unlikely(pci_enable_device(pdev) < 0)) {
+ i7core_printk(KERN_ERR,
+ "Couldn't enable "
+ "dev %02x:%02x.%d PCI ID %04x:%04x\n",
+ bus, dev_descr->dev, dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+ return -ENODEV;
+ }
+
+ debugf0("Detected socket %d dev %02x:%02x.%d PCI ID %04x:%04x\n",
+ socket, bus, dev_descr->dev,
+ dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+ *prev = pdev;
+
+ return 0;
+}
+
+static int i7core_get_devices(struct pci_id_table *table)
+{
+ int i, rc, last_bus;
+ struct pci_dev *pdev = NULL;
+ struct pci_id_descr *dev_descr;
+
+ last_bus = i7core_pci_lastbus();
+
+ while (table && table->descr) {
+ dev_descr = table->descr;
+ for (i = 0; i < table->n_devs; i++) {
+ pdev = NULL;
+ do {
+ rc = i7core_get_onedevice(&pdev, i,
+ &dev_descr[i],
+ table->n_devs,
+ last_bus);
+ if (rc < 0) {
+ if (i == 0) {
+ i = table->n_devs;
+ break;
+ }
+ i7core_put_all_devices();
+ return -ENODEV;
+ }
+ } while (pdev);
+ }
+ table++;
+ }
+
+ return 0;
+ return 0;
+}
+
+static int mci_bind_devs(struct mem_ctl_info *mci,
+ struct i7core_dev *i7core_dev)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ struct pci_dev *pdev;
+ int i, func, slot;
+
+ /* Associates i7core_dev and mci for future usage */
+ pvt->i7core_dev = i7core_dev;
+ i7core_dev->mci = mci;
+
+ pvt->is_registered = 0;
+ for (i = 0; i < i7core_dev->n_devs; i++) {
+ pdev = i7core_dev->pdev[i];
+ if (!pdev)
+ continue;
+
+ func = PCI_FUNC(pdev->devfn);
+ slot = PCI_SLOT(pdev->devfn);
+ if (slot == 3) {
+ if (unlikely(func > MAX_MCR_FUNC))
+ goto error;
+ pvt->pci_mcr[func] = pdev;
+ } else if (likely(slot >= 4 && slot < 4 + NUM_CHANS)) {
+ if (unlikely(func > MAX_CHAN_FUNC))
+ goto error;
+ pvt->pci_ch[slot - 4][func] = pdev;
+ } else if (!slot && !func)
+ pvt->pci_noncore = pdev;
+ else
+ goto error;
+
+ debugf0("Associated fn %d.%d, dev = %p, socket %d\n",
+ PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+ pdev, i7core_dev->socket);
+
+ if (PCI_SLOT(pdev->devfn) == 3 &&
+ PCI_FUNC(pdev->devfn) == 2)
+ pvt->is_registered = 1;
+ }
+
+ /*
+ * Add extra nodes to count errors on udimm
+ * For registered memory, this is not needed, since the counters
+ * are already displayed at the standard locations
+ */
+ if (!pvt->is_registered)
+ i7core_sysfs_attrs[ARRAY_SIZE(i7core_sysfs_attrs)-2].grp =
+ &i7core_udimm_counters;
+
+ return 0;
+
+error:
+ i7core_printk(KERN_ERR, "Device %d, function %d "
+ "is out of the expected range\n",
+ slot, func);
+ return -EINVAL;
+}
+
+/****************************************************************************
+ Error check routines
+ ****************************************************************************/
+static void i7core_rdimm_update_csrow(struct mem_ctl_info *mci,
+ int chan, int dimm, int add)
+{
+ char *msg;
+ struct i7core_pvt *pvt = mci->pvt_info;
+ int row = pvt->csrow_map[chan][dimm], i;
+
+ for (i = 0; i < add; i++) {
+ msg = kasprintf(GFP_KERNEL, "Corrected error "
+ "(Socket=%d channel=%d dimm=%d)",
+ pvt->i7core_dev->socket, chan, dimm);
+
+ edac_mc_handle_fbd_ce(mci, row, 0, msg);
+ kfree (msg);
+ }
+}
+
+static void i7core_rdimm_update_ce_count(struct mem_ctl_info *mci,
+ int chan, int new0, int new1, int new2)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ int add0 = 0, add1 = 0, add2 = 0;
+ /* Updates CE counters if it is not the first time here */
+ if (pvt->ce_count_available) {
+ /* Updates CE counters */
+
+ add2 = new2 - pvt->rdimm_last_ce_count[chan][2];
+ add1 = new1 - pvt->rdimm_last_ce_count[chan][1];
+ add0 = new0 - pvt->rdimm_last_ce_count[chan][0];
+
+ if (add2 < 0)
+ add2 += 0x7fff;
+ pvt->rdimm_ce_count[chan][2] += add2;
+
+ if (add1 < 0)
+ add1 += 0x7fff;
+ pvt->rdimm_ce_count[chan][1] += add1;
+
+ if (add0 < 0)
+ add0 += 0x7fff;
+ pvt->rdimm_ce_count[chan][0] += add0;
+ } else
+ pvt->ce_count_available = 1;
+
+ /* Store the new values */
+ pvt->rdimm_last_ce_count[chan][2] = new2;
+ pvt->rdimm_last_ce_count[chan][1] = new1;
+ pvt->rdimm_last_ce_count[chan][0] = new0;
+
+ /*updated the edac core */
+ if (add0 != 0)
+ i7core_rdimm_update_csrow(mci, chan, 0, add0);
+ if (add1 != 0)
+ i7core_rdimm_update_csrow(mci, chan, 1, add1);
+ if (add2 != 0)
+ i7core_rdimm_update_csrow(mci, chan, 2, add2);
+
+}
+
+static void i7core_rdimm_check_mc_ecc_err(struct mem_ctl_info *mci)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ u32 rcv[3][2];
+ int i, new0, new1, new2;
+
+ /*Read DEV 3: FUN 2: MC_COR_ECC_CNT regs directly*/
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_0,
+ &rcv[0][0]);
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_1,
+ &rcv[0][1]);
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_2,
+ &rcv[1][0]);
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_3,
+ &rcv[1][1]);
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_4,
+ &rcv[2][0]);
+ pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_5,
+ &rcv[2][1]);
+ for (i = 0 ; i < 3; i++) {
+ debugf3("MC_COR_ECC_CNT%d = 0x%x; MC_COR_ECC_CNT%d = 0x%x\n",
+ (i * 2), rcv[i][0], (i * 2) + 1, rcv[i][1]);
+ /*if the channel has 3 dimms*/
+ if (pvt->channel[i].dimms > 2) {
+ new0 = DIMM_BOT_COR_ERR(rcv[i][0]);
+ new1 = DIMM_TOP_COR_ERR(rcv[i][0]);
+ new2 = DIMM_BOT_COR_ERR(rcv[i][1]);
+ } else {
+ new0 = DIMM_TOP_COR_ERR(rcv[i][0]) +
+ DIMM_BOT_COR_ERR(rcv[i][0]);
+ new1 = DIMM_TOP_COR_ERR(rcv[i][1]) +
+ DIMM_BOT_COR_ERR(rcv[i][1]);
+ new2 = 0;
+ }
+
+ i7core_rdimm_update_ce_count(mci, i, new0, new1, new2);
+ }
+}
+
+/* This function is based on the device 3 function 4 registers as described on:
+ * Intel Xeon Processor 5500 Series Datasheet Volume 2
+ * http://www.intel.com/Assets/PDF/datasheet/321322.pdf
+ * also available at:
+ * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
+ */
+static void i7core_udimm_check_mc_ecc_err(struct mem_ctl_info *mci)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ u32 rcv1, rcv0;
+ int new0, new1, new2;
+
+ if (!pvt->pci_mcr[4]) {
+ debugf0("%s MCR registers not found\n", __func__);
+ return;
+ }
+
+ /* Corrected test errors */
+ pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV1, &rcv1);
+ pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV0, &rcv0);
+
+ /* Store the new values */
+ new2 = DIMM2_COR_ERR(rcv1);
+ new1 = DIMM1_COR_ERR(rcv0);
+ new0 = DIMM0_COR_ERR(rcv0);
+
+ /* Updates CE counters if it is not the first time here */
+ if (pvt->ce_count_available) {
+ /* Updates CE counters */
+ int add0, add1, add2;
+
+ add2 = new2 - pvt->udimm_last_ce_count[2];
+ add1 = new1 - pvt->udimm_last_ce_count[1];
+ add0 = new0 - pvt->udimm_last_ce_count[0];
+
+ if (add2 < 0)
+ add2 += 0x7fff;
+ pvt->udimm_ce_count[2] += add2;
+
+ if (add1 < 0)
+ add1 += 0x7fff;
+ pvt->udimm_ce_count[1] += add1;
+
+ if (add0 < 0)
+ add0 += 0x7fff;
+ pvt->udimm_ce_count[0] += add0;
+
+ if (add0 | add1 | add2)
+ i7core_printk(KERN_ERR, "New Corrected error(s): "
+ "dimm0: +%d, dimm1: +%d, dimm2 +%d\n",
+ add0, add1, add2);
+ } else
+ pvt->ce_count_available = 1;
+
+ /* Store the new values */
+ pvt->udimm_last_ce_count[2] = new2;
+ pvt->udimm_last_ce_count[1] = new1;
+ pvt->udimm_last_ce_count[0] = new0;
+}
+
+/*
+ * According with tables E-11 and E-12 of chapter E.3.3 of Intel 64 and IA-32
+ * Architectures Software Developer’s Manual Volume 3B.
+ * Nehalem are defined as family 0x06, model 0x1a
+ *
+ * The MCA registers used here are the following ones:
+ * struct mce field MCA Register
+ * m->status MSR_IA32_MC8_STATUS
+ * m->addr MSR_IA32_MC8_ADDR
+ * m->misc MSR_IA32_MC8_MISC
+ * In the case of Nehalem, the error information is masked at .status and .misc
+ * fields
+ */
+static void i7core_mce_output_error(struct mem_ctl_info *mci,
+ struct mce *m)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ char *type, *optype, *err, *msg;
+ unsigned long error = m->status & 0x1ff0000l;
+ u32 optypenum = (m->status >> 4) & 0x07;
+ u32 core_err_cnt = (m->status >> 38) && 0x7fff;
+ u32 dimm = (m->misc >> 16) & 0x3;
+ u32 channel = (m->misc >> 18) & 0x3;
+ u32 syndrome = m->misc >> 32;
+ u32 errnum = find_first_bit(&error, 32);
+ int csrow;
+
+ if (m->mcgstatus & 1)
+ type = "FATAL";
+ else
+ type = "NON_FATAL";
+
+ switch (optypenum) {
+ case 0:
+ optype = "generic undef request";
+ break;
+ case 1:
+ optype = "read error";
+ break;
+ case 2:
+ optype = "write error";
+ break;
+ case 3:
+ optype = "addr/cmd error";
+ break;
+ case 4:
+ optype = "scrubbing error";
+ break;
+ default:
+ optype = "reserved";
+ break;
+ }
+
+ switch (errnum) {
+ case 16:
+ err = "read ECC error";
+ break;
+ case 17:
+ err = "RAS ECC error";
+ break;
+ case 18:
+ err = "write parity error";
+ break;
+ case 19:
+ err = "redundacy loss";
+ break;
+ case 20:
+ err = "reserved";
+ break;
+ case 21:
+ err = "memory range error";
+ break;
+ case 22:
+ err = "RTID out of range";
+ break;
+ case 23:
+ err = "address parity error";
+ break;
+ case 24:
+ err = "byte enable parity error";
+ break;
+ default:
+ err = "unknown";
+ }
+
+ /* FIXME: should convert addr into bank and rank information */
+ msg = kasprintf(GFP_ATOMIC,
+ "%s (addr = 0x%08llx, cpu=%d, Dimm=%d, Channel=%d, "
+ "syndrome=0x%08x, count=%d, Err=%08llx:%08llx (%s: %s))\n",
+ type, (long long) m->addr, m->cpu, dimm, channel,
+ syndrome, core_err_cnt, (long long)m->status,
+ (long long)m->misc, optype, err);
+
+ debugf0("%s", msg);
+
+ csrow = pvt->csrow_map[channel][dimm];
+
+ /* Call the helper to output message */
+ if (m->mcgstatus & 1)
+ edac_mc_handle_fbd_ue(mci, csrow, 0,
+ 0 /* FIXME: should be channel here */, msg);
+ else if (!pvt->is_registered)
+ edac_mc_handle_fbd_ce(mci, csrow,
+ 0 /* FIXME: should be channel here */, msg);
+
+ kfree(msg);
+}
+
+/*
+ * i7core_check_error Retrieve and process errors reported by the
+ * hardware. Called by the Core module.
+ */
+static void i7core_check_error(struct mem_ctl_info *mci)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ int i;
+ unsigned count = 0;
+ struct mce *m;
+
+ /*
+ * MCE first step: Copy all mce errors into a temporary buffer
+ * We use a double buffering here, to reduce the risk of
+ * loosing an error.
+ */
+ smp_rmb();
+ count = (pvt->mce_out + MCE_LOG_LEN - pvt->mce_in)
+ % MCE_LOG_LEN;
+ if (!count)
+ goto check_ce_error;
+
+ m = pvt->mce_outentry;
+ if (pvt->mce_in + count > MCE_LOG_LEN) {
+ unsigned l = MCE_LOG_LEN - pvt->mce_in;
+
+ memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * l);
+ smp_wmb();
+ pvt->mce_in = 0;
+ count -= l;
+ m += l;
+ }
+ memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * count);
+ smp_wmb();
+ pvt->mce_in += count;
+
+ smp_rmb();
+ if (pvt->mce_overrun) {
+ i7core_printk(KERN_ERR, "Lost %d memory errors\n",
+ pvt->mce_overrun);
+ smp_wmb();
+ pvt->mce_overrun = 0;
+ }
+
+ /*
+ * MCE second step: parse errors and display
+ */
+ for (i = 0; i < count; i++)
+ i7core_mce_output_error(mci, &pvt->mce_outentry[i]);
+
+ /*
+ * Now, let's increment CE error counts
+ */
+check_ce_error:
+ if (!pvt->is_registered)
+ i7core_udimm_check_mc_ecc_err(mci);
+ else
+ i7core_rdimm_check_mc_ecc_err(mci);
+}
+
+/*
+ * i7core_mce_check_error Replicates mcelog routine to get errors
+ * This routine simply queues mcelog errors, and
+ * return. The error itself should be handled later
+ * by i7core_check_error.
+ * WARNING: As this routine should be called at NMI time, extra care should
+ * be taken to avoid deadlocks, and to be as fast as possible.
+ */
+static int i7core_mce_check_error(void *priv, struct mce *mce)
+{
+ struct mem_ctl_info *mci = priv;
+ struct i7core_pvt *pvt = mci->pvt_info;
+
+ /*
+ * Just let mcelog handle it if the error is
+ * outside the memory controller
+ */
+ if (((mce->status & 0xffff) >> 7) != 1)
+ return 0;
+
+ /* Bank 8 registers are the only ones that we know how to handle */
+ if (mce->bank != 8)
+ return 0;
+
+#ifdef CONFIG_SMP
+ /* Only handle if it is the right mc controller */
+ if (cpu_data(mce->cpu).phys_proc_id != pvt->i7core_dev->socket)
+ return 0;
+#endif
+
+ smp_rmb();
+ if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
+ smp_wmb();
+ pvt->mce_overrun++;
+ return 0;
+ }
+
+ /* Copy memory error at the ringbuffer */
+ memcpy(&pvt->mce_entry[pvt->mce_out], mce, sizeof(*mce));
+ smp_wmb();
+ pvt->mce_out = (pvt->mce_out + 1) % MCE_LOG_LEN;
+
+ /* Handle fatal errors immediately */
+ if (mce->mcgstatus & 1)
+ i7core_check_error(mci);
+
+ /* Advice mcelog that the error were handled */
+ return 1;
+}
+
+static int i7core_register_mci(struct i7core_dev *i7core_dev,
+ int num_channels, int num_csrows)
+{
+ struct mem_ctl_info *mci;
+ struct i7core_pvt *pvt;
+ int csrow = 0;
+ int rc;
+
+ /* allocate a new MC control structure */
+ mci = edac_mc_alloc(sizeof(*pvt), num_csrows, num_channels,
+ i7core_dev->socket);
+ if (unlikely(!mci))
+ return -ENOMEM;
+
+ debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
+
+ /* record ptr to the generic device */
+ mci->dev = &i7core_dev->pdev[0]->dev;
+
+ pvt = mci->pvt_info;
+ memset(pvt, 0, sizeof(*pvt));
+
+ /*
+ * FIXME: how to handle RDDR3 at MCI level? It is possible to have
+ * Mixed RDDR3/UDDR3 with Nehalem, provided that they are on different
+ * memory channels
+ */
+ mci->mtype_cap = MEM_FLAG_DDR3;
+ mci->edac_ctl_cap = EDAC_FLAG_NONE;
+ mci->edac_cap = EDAC_FLAG_NONE;
+ mci->mod_name = "i7core_edac.c";
+ mci->mod_ver = I7CORE_REVISION;
+ mci->ctl_name = kasprintf(GFP_KERNEL, "i7 core #%d",
+ i7core_dev->socket);
+ mci->dev_name = pci_name(i7core_dev->pdev[0]);
+ mci->ctl_page_to_phys = NULL;
+ mci->mc_driver_sysfs_attributes = i7core_sysfs_attrs;
+ /* Set the function pointer to an actual operation function */
+ mci->edac_check = i7core_check_error;
+
+ /* Store pci devices at mci for faster access */
+ rc = mci_bind_devs(mci, i7core_dev);
+ if (unlikely(rc < 0))
+ goto fail;
+
+ /* Get dimm basic config */
+ get_dimm_config(mci, &csrow);
+
+ /* add this new MC control structure to EDAC's list of MCs */
+ if (unlikely(edac_mc_add_mc(mci))) {
+ debugf0("MC: " __FILE__
+ ": %s(): failed edac_mc_add_mc()\n", __func__);
+ /* FIXME: perhaps some code should go here that disables error
+ * reporting if we just enabled it
+ */
+
+ rc = -EINVAL;
+ goto fail;
+ }
+
+ /* allocating generic PCI control info */
+ i7core_pci = edac_pci_create_generic_ctl(&i7core_dev->pdev[0]->dev,
+ EDAC_MOD_STR);
+ if (unlikely(!i7core_pci)) {
+ printk(KERN_WARNING
+ "%s(): Unable to create PCI control\n",
+ __func__);
+ printk(KERN_WARNING
+ "%s(): PCI error report via EDAC not setup\n",
+ __func__);
+ }
+
+ /* Default error mask is any memory */
+ pvt->inject.channel = 0;
+ pvt->inject.dimm = -1;
+ pvt->inject.rank = -1;
+ pvt->inject.bank = -1;
+ pvt->inject.page = -1;
+ pvt->inject.col = -1;
+
+ /* Registers on edac_mce in order to receive memory errors */
+ pvt->edac_mce.priv = mci;
+ pvt->edac_mce.check_error = i7core_mce_check_error;
+
+ rc = edac_mce_register(&pvt->edac_mce);
+ if (unlikely(rc < 0)) {
+ debugf0("MC: " __FILE__
+ ": %s(): failed edac_mce_register()\n", __func__);
+ }
+
+fail:
+ if (rc < 0)
+ edac_mc_free(mci);
+ return rc;
+}
+
+/*
+ * i7core_probe Probe for ONE instance of device to see if it is
+ * present.
+ * return:
+ * 0 for FOUND a device
+ * < 0 for error code
+ */
+
+static int probed = 0;
+
+static int __devinit i7core_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ int rc;
+ struct i7core_dev *i7core_dev;
+
+ /* get the pci devices we want to reserve for our use */
+ mutex_lock(&i7core_edac_lock);
+
+ /*
+ * All memory controllers are allocated at the first pass.
+ */
+ if (unlikely(probed >= 1)) {
+ mutex_unlock(&i7core_edac_lock);
+ return -EINVAL;
+ }
+ probed++;
+
+ rc = i7core_get_devices(pci_dev_table);
+ if (unlikely(rc < 0))
+ goto fail0;
+
+ list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
+ int channels;
+ int csrows;
+
+ /* Check the number of active and not disabled channels */
+ rc = i7core_get_active_channels(i7core_dev->socket,
+ &channels, &csrows);
+ if (unlikely(rc < 0))
+ goto fail1;
+
+ rc = i7core_register_mci(i7core_dev, channels, csrows);
+ if (unlikely(rc < 0))
+ goto fail1;
+ }
+
+ i7core_printk(KERN_INFO, "Driver loaded.\n");
+
+ mutex_unlock(&i7core_edac_lock);
+ return 0;
+
+fail1:
+ i7core_put_all_devices();
+fail0:
+ mutex_unlock(&i7core_edac_lock);
+ return rc;
+}
+
+/*
+ * i7core_remove destructor for one instance of device
+ *
+ */
+static void __devexit i7core_remove(struct pci_dev *pdev)
+{
+ struct mem_ctl_info *mci;
+ struct i7core_dev *i7core_dev, *tmp;
+
+ debugf0(__FILE__ ": %s()\n", __func__);
+
+ if (i7core_pci)
+ edac_pci_release_generic_ctl(i7core_pci);
+
+ /*
+ * we have a trouble here: pdev value for removal will be wrong, since
+ * it will point to the X58 register used to detect that the machine
+ * is a Nehalem or upper design. However, due to the way several PCI
+ * devices are grouped together to provide MC functionality, we need
+ * to use a different method for releasing the devices
+ */
+
+ mutex_lock(&i7core_edac_lock);
+ list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list) {
+ mci = edac_mc_del_mc(&i7core_dev->pdev[0]->dev);
+ if (mci) {
+ struct i7core_pvt *pvt = mci->pvt_info;
+
+ i7core_dev = pvt->i7core_dev;
+ edac_mce_unregister(&pvt->edac_mce);
+ kfree(mci->ctl_name);
+ edac_mc_free(mci);
+ i7core_put_devices(i7core_dev);
+ } else {
+ i7core_printk(KERN_ERR,
+ "Couldn't find mci for socket %d\n",
+ i7core_dev->socket);
+ }
+ }
+ probed--;
+
+ mutex_unlock(&i7core_edac_lock);
+}
+
+MODULE_DEVICE_TABLE(pci, i7core_pci_tbl);
+
+/*
+ * i7core_driver pci_driver structure for this module
+ *
+ */
+static struct pci_driver i7core_driver = {
+ .name = "i7core_edac",
+ .probe = i7core_probe,
+ .remove = __devexit_p(i7core_remove),
+ .id_table = i7core_pci_tbl,
+};
+
+/*
+ * i7core_init Module entry function
+ * Try to initialize this module for its devices
+ */
+static int __init i7core_init(void)
+{
+ int pci_rc;
+
+ debugf2("MC: " __FILE__ ": %s()\n", __func__);
+
+ /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+ opstate_init();
+
+ i7core_xeon_pci_fixup(pci_dev_table);
+
+ pci_rc = pci_register_driver(&i7core_driver);
+
+ if (pci_rc >= 0)
+ return 0;
+
+ i7core_printk(KERN_ERR, "Failed to register device with error %d.\n",
+ pci_rc);
+
+ return pci_rc;
+}
+
+/*
+ * i7core_exit() Module exit function
+ * Unregister the driver
+ */
+static void __exit i7core_exit(void)
+{
+ debugf2("MC: " __FILE__ ": %s()\n", __func__);
+ pci_unregister_driver(&i7core_driver);
+}
+
+module_init(i7core_init);
+module_exit(i7core_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("MC Driver for Intel i7 Core memory controllers - "
+ I7CORE_REVISION);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c
index 2bf2c50..a2fa1fe 100644
--- a/drivers/edac/i82443bxgx_edac.c
+++ b/drivers/edac/i82443bxgx_edac.c
@@ -178,7 +178,7 @@
{
struct i82443bxgx_edacmc_error_info info;
- debugf1("MC%d: " __FILE__ ": %s()\n", mci->mc_idx, __func__);
+ debugf1("MC%d: %s: %s()\n", mci->mc_idx, __FILE__, __func__);
i82443bxgx_edacmc_get_error_info(mci, &info);
i82443bxgx_edacmc_process_error_info(mci, &info, 1);
}
@@ -198,13 +198,13 @@
for (index = 0; index < mci->nr_csrows; index++) {
csrow = &mci->csrows[index];
pci_read_config_byte(pdev, I82443BXGX_DRB + index, &drbar);
- debugf1("MC%d: " __FILE__ ": %s() Row=%d DRB = %#0x\n",
- mci->mc_idx, __func__, index, drbar);
+ debugf1("MC%d: %s: %s() Row=%d DRB = %#0x\n",
+ mci->mc_idx, __FILE__, __func__, index, drbar);
row_high_limit = ((u32) drbar << 23);
/* find the DRAM Chip Select Base address and mask */
- debugf1("MC%d: " __FILE__ ": %s() Row=%d, "
- "Boundry Address=%#0x, Last = %#0x \n",
- mci->mc_idx, __func__, index, row_high_limit,
+ debugf1("MC%d: %s: %s() Row=%d, "
+ "Boundry Address=%#0x, Last = %#0x\n",
+ mci->mc_idx, __FILE__, __func__, index, row_high_limit,
row_high_limit_last);
/* 440GX goes to 2GB, represented with a DRB of 0. */
@@ -237,7 +237,7 @@
enum mem_type mtype;
enum edac_type edac_mode;
- debugf0("MC: " __FILE__ ": %s()\n", __func__);
+ debugf0("MC: %s: %s()\n", __FILE__, __func__);
/* Something is really hosed if PCI config space reads from
* the MC aren't working.
@@ -250,7 +250,7 @@
if (mci == NULL)
return -ENOMEM;
- debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
+ debugf0("MC: %s: %s(): mci = %p\n", __FILE__, __func__, mci);
mci->dev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_EDO | MEM_FLAG_SDR | MEM_FLAG_RDR;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
@@ -336,7 +336,7 @@
__func__);
}
- debugf3("MC: " __FILE__ ": %s(): success\n", __func__);
+ debugf3("MC: %s: %s(): success\n", __FILE__, __func__);
return 0;
fail:
@@ -352,7 +352,7 @@
{
int rc;
- debugf0("MC: " __FILE__ ": %s()\n", __func__);
+ debugf0("MC: %s: %s()\n", __FILE__, __func__);
/* don't need to call pci_enable_device() */
rc = i82443bxgx_edacmc_probe1(pdev, ent->driver_data);
@@ -367,7 +367,7 @@
{
struct mem_ctl_info *mci;
- debugf0(__FILE__ ": %s()\n", __func__);
+ debugf0("%s: %s()\n", __FILE__, __func__);
if (i82443bxgx_pci)
edac_pci_release_generic_ctl(i82443bxgx_pci);
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 6c1886b..f39b00a 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -229,7 +229,7 @@
pdata->edac_idx = edac_pci_idx++;
- res = of_address_to_resource(op->node, 0, &r);
+ res = of_address_to_resource(op->dev.of_node, 0, &r);
if (res) {
printk(KERN_ERR "%s: Unable to get resource for "
"PCI err regs\n", __func__);
@@ -274,7 +274,7 @@
}
if (edac_op_state == EDAC_OPSTATE_INT) {
- pdata->irq = irq_of_parse_and_map(op->node, 0);
+ pdata->irq = irq_of_parse_and_map(op->dev.of_node, 0);
res = devm_request_irq(&op->dev, pdata->irq,
mpc85xx_pci_isr, IRQF_DISABLED,
"[EDAC] PCI err", pci);
@@ -529,7 +529,7 @@
edac_dev->ctl_name = pdata->name;
edac_dev->dev_name = pdata->name;
- res = of_address_to_resource(op->node, 0, &r);
+ res = of_address_to_resource(op->dev.of_node, 0, &r);
if (res) {
printk(KERN_ERR "%s: Unable to get resource for "
"L2 err regs\n", __func__);
@@ -576,7 +576,7 @@
}
if (edac_op_state == EDAC_OPSTATE_INT) {
- pdata->irq = irq_of_parse_and_map(op->node, 0);
+ pdata->irq = irq_of_parse_and_map(op->dev.of_node, 0);
res = devm_request_irq(&op->dev, pdata->irq,
mpc85xx_l2_isr, IRQF_DISABLED,
"[EDAC] L2 err", edac_dev);
@@ -978,7 +978,7 @@
mci->ctl_name = pdata->name;
mci->dev_name = pdata->name;
- res = of_address_to_resource(op->node, 0, &r);
+ res = of_address_to_resource(op->dev.of_node, 0, &r);
if (res) {
printk(KERN_ERR "%s: Unable to get resource for MC err regs\n",
__func__);
@@ -1052,7 +1052,7 @@
out_be32(pdata->mc_vbase + MPC85XX_MC_ERR_SBE, 0x10000);
/* register interrupts */
- pdata->irq = irq_of_parse_and_map(op->node, 0);
+ pdata->irq = irq_of_parse_and_map(op->dev.of_node, 0);
res = devm_request_irq(&op->dev, pdata->irq,
mpc85xx_mc_isr,
IRQF_DISABLED | IRQF_SHARED,
@@ -1120,6 +1120,7 @@
{ .compatible = "fsl,mpc8555-memory-controller", },
{ .compatible = "fsl,mpc8560-memory-controller", },
{ .compatible = "fsl,mpc8568-memory-controller", },
+ { .compatible = "fsl,mpc8569-memory-controller", },
{ .compatible = "fsl,mpc8572-memory-controller", },
{ .compatible = "fsl,mpc8349-memory-controller", },
{ .compatible = "fsl,p2020-memory-controller", },
diff --git a/drivers/edac/ppc4xx_edac.c b/drivers/edac/ppc4xx_edac.c
index 9d6f678..e78839e 100644
--- a/drivers/edac/ppc4xx_edac.c
+++ b/drivers/edac/ppc4xx_edac.c
@@ -1022,7 +1022,7 @@
int status = 0;
const u32 memcheck = (mcopt1 & SDRAM_MCOPT1_MCHK_MASK);
struct ppc4xx_edac_pdata *pdata = NULL;
- const struct device_node *np = op->node;
+ const struct device_node *np = op->dev.of_node;
if (match == NULL)
return -EINVAL;
@@ -1113,7 +1113,7 @@
int status = 0;
int ded_irq, sec_irq;
struct ppc4xx_edac_pdata *pdata = mci->pvt_info;
- struct device_node *np = op->node;
+ struct device_node *np = op->dev.of_node;
ded_irq = irq_of_parse_and_map(np, INTMAP_ECCDED_INDEX);
sec_irq = irq_of_parse_and_map(np, INTMAP_ECCSEC_INDEX);
@@ -1243,7 +1243,7 @@
int status = 0;
u32 mcopt1, memcheck;
dcr_host_t dcr_host;
- const struct device_node *np = op->node;
+ const struct device_node *np = op->dev.of_node;
struct mem_ctl_info *mci = NULL;
static int ppc4xx_edac_instance;
diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c
index 5045156..371713f 100644
--- a/drivers/firewire/core-card.c
+++ b/drivers/firewire/core-card.c
@@ -30,7 +30,6 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
-#include <linux/timer.h>
#include <linux/workqueue.h>
#include <asm/atomic.h>
@@ -63,7 +62,7 @@
#define BIB_CRC(v) ((v) << 0)
#define BIB_CRC_LENGTH(v) ((v) << 16)
#define BIB_INFO_LENGTH(v) ((v) << 24)
-
+#define BIB_BUS_NAME 0x31333934 /* "1394" */
#define BIB_LINK_SPEED(v) ((v) << 0)
#define BIB_GENERATION(v) ((v) << 4)
#define BIB_MAX_ROM(v) ((v) << 8)
@@ -73,7 +72,8 @@
#define BIB_BMC ((1) << 28)
#define BIB_ISC ((1) << 29)
#define BIB_CMC ((1) << 30)
-#define BIB_IMC ((1) << 31)
+#define BIB_IRMC ((1) << 31)
+#define NODE_CAPABILITIES 0x0c0083c0 /* per IEEE 1394 clause 8.3.2.6.5.2 */
static void generate_config_rom(struct fw_card *card, __be32 *config_rom)
{
@@ -91,18 +91,18 @@
config_rom[0] = cpu_to_be32(
BIB_CRC_LENGTH(4) | BIB_INFO_LENGTH(4) | BIB_CRC(0));
- config_rom[1] = cpu_to_be32(0x31333934);
+ config_rom[1] = cpu_to_be32(BIB_BUS_NAME);
config_rom[2] = cpu_to_be32(
BIB_LINK_SPEED(card->link_speed) |
BIB_GENERATION(card->config_rom_generation++ % 14 + 2) |
BIB_MAX_ROM(2) |
BIB_MAX_RECEIVE(card->max_receive) |
- BIB_BMC | BIB_ISC | BIB_CMC | BIB_IMC);
+ BIB_BMC | BIB_ISC | BIB_CMC | BIB_IRMC);
config_rom[3] = cpu_to_be32(card->guid >> 32);
config_rom[4] = cpu_to_be32(card->guid);
/* Generate root directory. */
- config_rom[6] = cpu_to_be32(0x0c0083c0); /* node capabilities */
+ config_rom[6] = cpu_to_be32(NODE_CAPABILITIES);
i = 7;
j = 7 + descriptor_count;
@@ -231,7 +231,7 @@
static void fw_card_bm_work(struct work_struct *work)
{
struct fw_card *card = container_of(work, struct fw_card, work.work);
- struct fw_device *root_device;
+ struct fw_device *root_device, *irm_device;
struct fw_node *root_node;
unsigned long flags;
int root_id, new_root_id, irm_id, local_id;
@@ -239,6 +239,7 @@
bool do_reset = false;
bool root_device_is_running;
bool root_device_is_cmc;
+ bool irm_is_1394_1995_only;
spin_lock_irqsave(&card->lock, flags);
@@ -248,12 +249,18 @@
}
generation = card->generation;
+
root_node = card->root_node;
fw_node_get(root_node);
root_device = root_node->data;
root_device_is_running = root_device &&
atomic_read(&root_device->state) == FW_DEVICE_RUNNING;
root_device_is_cmc = root_device && root_device->cmc;
+
+ irm_device = card->irm_node->data;
+ irm_is_1394_1995_only = irm_device && irm_device->config_rom &&
+ (irm_device->config_rom[2] & 0x000000f0) == 0;
+
root_id = root_node->node_id;
irm_id = card->irm_node->node_id;
local_id = card->local_node->node_id;
@@ -276,8 +283,15 @@
if (!card->irm_node->link_on) {
new_root_id = local_id;
- fw_notify("IRM has link off, making local node (%02x) root.\n",
- new_root_id);
+ fw_notify("%s, making local node (%02x) root.\n",
+ "IRM has link off", new_root_id);
+ goto pick_me;
+ }
+
+ if (irm_is_1394_1995_only) {
+ new_root_id = local_id;
+ fw_notify("%s, making local node (%02x) root.\n",
+ "IRM is not 1394a compliant", new_root_id);
goto pick_me;
}
@@ -316,8 +330,8 @@
* root, and thus, IRM.
*/
new_root_id = local_id;
- fw_notify("BM lock failed, making local node (%02x) root.\n",
- new_root_id);
+ fw_notify("%s, making local node (%02x) root.\n",
+ "BM lock failed", new_root_id);
goto pick_me;
}
} else if (card->bm_generation != generation) {
@@ -407,13 +421,6 @@
fw_card_put(card);
}
-static void flush_timer_callback(unsigned long data)
-{
- struct fw_card *card = (struct fw_card *)data;
-
- fw_flush_transactions(card);
-}
-
void fw_card_initialize(struct fw_card *card,
const struct fw_card_driver *driver,
struct device *device)
@@ -432,8 +439,6 @@
init_completion(&card->done);
INIT_LIST_HEAD(&card->transaction_list);
spin_lock_init(&card->lock);
- setup_timer(&card->flush_timer,
- flush_timer_callback, (unsigned long)card);
card->local_node = NULL;
@@ -558,7 +563,6 @@
wait_for_completion(&card->done);
WARN_ON(!list_empty(&card->transaction_list));
- del_timer_sync(&card->flush_timer);
}
EXPORT_SYMBOL(fw_core_remove_card);
diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c
index 14a34d9..5bf106b 100644
--- a/drivers/firewire/core-cdev.c
+++ b/drivers/firewire/core-cdev.c
@@ -227,7 +227,7 @@
list_add_tail(&client->link, &device->client_list);
mutex_unlock(&device->client_list_mutex);
- return 0;
+ return nonseekable_open(inode, file);
}
static void queue_event(struct client *client, struct event *event,
@@ -1496,13 +1496,13 @@
const struct file_operations fw_device_ops = {
.owner = THIS_MODULE,
+ .llseek = no_llseek,
.open = fw_device_op_open,
.read = fw_device_op_read,
.unlocked_ioctl = fw_device_op_ioctl,
- .poll = fw_device_op_poll,
- .release = fw_device_op_release,
.mmap = fw_device_op_mmap,
-
+ .release = fw_device_op_release,
+ .poll = fw_device_op_poll,
#ifdef CONFIG_COMPAT
.compat_ioctl = fw_device_op_compat_ioctl,
#endif
diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c
index 673b03f..fdc33ff 100644
--- a/drivers/firewire/core-transaction.c
+++ b/drivers/firewire/core-transaction.c
@@ -81,7 +81,7 @@
spin_lock_irqsave(&card->lock, flags);
list_for_each_entry(t, &card->transaction_list, link) {
if (t == transaction) {
- list_del(&t->link);
+ list_del_init(&t->link);
card->tlabel_mask &= ~(1ULL << t->tlabel);
break;
}
@@ -89,6 +89,7 @@
spin_unlock_irqrestore(&card->lock, flags);
if (&t->link != &card->transaction_list) {
+ del_timer_sync(&t->split_timeout_timer);
t->callback(card, rcode, NULL, 0, t->callback_data);
return 0;
}
@@ -121,6 +122,31 @@
}
EXPORT_SYMBOL(fw_cancel_transaction);
+static void split_transaction_timeout_callback(unsigned long data)
+{
+ struct fw_transaction *t = (struct fw_transaction *)data;
+ struct fw_card *card = t->card;
+ unsigned long flags;
+
+ spin_lock_irqsave(&card->lock, flags);
+ if (list_empty(&t->link)) {
+ spin_unlock_irqrestore(&card->lock, flags);
+ return;
+ }
+ list_del(&t->link);
+ card->tlabel_mask &= ~(1ULL << t->tlabel);
+ spin_unlock_irqrestore(&card->lock, flags);
+
+ card->driver->cancel_packet(card, &t->packet);
+
+ /*
+ * At this point cancel_packet will never call the transaction
+ * callback, since we just took the transaction out of the list.
+ * So do it here.
+ */
+ t->callback(card, RCODE_CANCELLED, NULL, 0, t->callback_data);
+}
+
static void transmit_complete_callback(struct fw_packet *packet,
struct fw_card *card, int status)
{
@@ -229,6 +255,23 @@
packet->payload_mapped = false;
}
+static int allocate_tlabel(struct fw_card *card)
+{
+ int tlabel;
+
+ tlabel = card->current_tlabel;
+ while (card->tlabel_mask & (1ULL << tlabel)) {
+ tlabel = (tlabel + 1) & 0x3f;
+ if (tlabel == card->current_tlabel)
+ return -EBUSY;
+ }
+
+ card->current_tlabel = (tlabel + 1) & 0x3f;
+ card->tlabel_mask |= 1ULL << tlabel;
+
+ return tlabel;
+}
+
/**
* This function provides low-level access to the IEEE1394 transaction
* logic. Most C programs would use either fw_read(), fw_write() or
@@ -277,31 +320,26 @@
int tlabel;
/*
- * Bump the flush timer up 100ms first of all so we
- * don't race with a flush timer callback.
- */
-
- mod_timer(&card->flush_timer, jiffies + DIV_ROUND_UP(HZ, 10));
-
- /*
* Allocate tlabel from the bitmap and put the transaction on
* the list while holding the card spinlock.
*/
spin_lock_irqsave(&card->lock, flags);
- tlabel = card->current_tlabel;
- if (card->tlabel_mask & (1ULL << tlabel)) {
+ tlabel = allocate_tlabel(card);
+ if (tlabel < 0) {
spin_unlock_irqrestore(&card->lock, flags);
callback(card, RCODE_SEND_ERROR, NULL, 0, callback_data);
return;
}
- card->current_tlabel = (card->current_tlabel + 1) & 0x3f;
- card->tlabel_mask |= (1ULL << tlabel);
-
t->node_id = destination_id;
t->tlabel = tlabel;
+ t->card = card;
+ setup_timer(&t->split_timeout_timer,
+ split_transaction_timeout_callback, (unsigned long)t);
+ /* FIXME: start this timer later, relative to t->timestamp */
+ mod_timer(&t->split_timeout_timer, jiffies + DIV_ROUND_UP(HZ, 10));
t->callback = callback;
t->callback_data = callback_data;
@@ -347,11 +385,13 @@
struct transaction_callback_data d;
struct fw_transaction t;
+ init_timer_on_stack(&t.split_timeout_timer);
init_completion(&d.done);
d.payload = payload;
fw_send_request(card, &t, tcode, destination_id, generation, speed,
offset, payload, length, transaction_callback, &d);
wait_for_completion(&d.done);
+ destroy_timer_on_stack(&t.split_timeout_timer);
return d.rcode;
}
@@ -394,30 +434,6 @@
mutex_unlock(&phy_config_mutex);
}
-void fw_flush_transactions(struct fw_card *card)
-{
- struct fw_transaction *t, *next;
- struct list_head list;
- unsigned long flags;
-
- INIT_LIST_HEAD(&list);
- spin_lock_irqsave(&card->lock, flags);
- list_splice_init(&card->transaction_list, &list);
- card->tlabel_mask = 0;
- spin_unlock_irqrestore(&card->lock, flags);
-
- list_for_each_entry_safe(t, next, &list, link) {
- card->driver->cancel_packet(card, &t->packet);
-
- /*
- * At this point cancel_packet will never call the
- * transaction callback, since we just took all the
- * transactions out of the list. So do it here.
- */
- t->callback(card, RCODE_CANCELLED, NULL, 0, t->callback_data);
- }
-}
-
static struct fw_address_handler *lookup_overlapping_address_handler(
struct list_head *list, unsigned long long offset, size_t length)
{
@@ -827,8 +843,8 @@
spin_lock_irqsave(&card->lock, flags);
list_for_each_entry(t, &card->transaction_list, link) {
if (t->node_id == source && t->tlabel == tlabel) {
- list_del(&t->link);
- card->tlabel_mask &= ~(1 << t->tlabel);
+ list_del_init(&t->link);
+ card->tlabel_mask &= ~(1ULL << t->tlabel);
break;
}
}
@@ -869,6 +885,8 @@
break;
}
+ del_timer_sync(&t->split_timeout_timer);
+
/*
* The response handler may be executed while the request handler
* is still pending. Cancel the request handler.
diff --git a/drivers/firewire/core.h b/drivers/firewire/core.h
index fb03213..0ecfcd9 100644
--- a/drivers/firewire/core.h
+++ b/drivers/firewire/core.h
@@ -27,7 +27,12 @@
#define PHY_LINK_ACTIVE 0x80
#define PHY_CONTENDER 0x40
#define PHY_BUS_RESET 0x40
+#define PHY_EXTENDED_REGISTERS 0xe0
#define PHY_BUS_SHORT_RESET 0x40
+#define PHY_INT_STATUS_BITS 0x3c
+#define PHY_ENABLE_ACCEL 0x02
+#define PHY_ENABLE_MULTI 0x01
+#define PHY_PAGE_SELECT 0xe0
#define BANDWIDTH_AVAILABLE_INITIAL 4915
#define BROADCAST_CHANNEL_INITIAL (1 << 31 | 31)
@@ -215,7 +220,6 @@
void fw_core_handle_response(struct fw_card *card, struct fw_packet *packet);
void fw_fill_response(struct fw_packet *response, u32 *request_header,
int rcode, void *payload, size_t length);
-void fw_flush_transactions(struct fw_card *card);
void fw_send_phy_config(struct fw_card *card,
int node_id, int generation, int gap_count);
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index a3b083a..9f627e7 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -236,13 +236,15 @@
#define QUIRK_CYCLE_TIMER 1
#define QUIRK_RESET_PACKET 2
#define QUIRK_BE_HEADERS 4
+#define QUIRK_NO_1394A 8
/* In case of multiple matches in ohci_quirks[], only the first one is used. */
static const struct {
unsigned short vendor, device, flags;
} ohci_quirks[] = {
{PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV22, QUIRK_CYCLE_TIMER |
- QUIRK_RESET_PACKET},
+ QUIRK_RESET_PACKET |
+ QUIRK_NO_1394A},
{PCI_VENDOR_ID_TI, PCI_ANY_ID, QUIRK_RESET_PACKET},
{PCI_VENDOR_ID_AL, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
{PCI_VENDOR_ID_NEC, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
@@ -257,15 +259,16 @@
", nonatomic cycle timer = " __stringify(QUIRK_CYCLE_TIMER)
", reset packet generation = " __stringify(QUIRK_RESET_PACKET)
", AR/selfID endianess = " __stringify(QUIRK_BE_HEADERS)
+ ", no 1394a enhancements = " __stringify(QUIRK_NO_1394A)
")");
-#ifdef CONFIG_FIREWIRE_OHCI_DEBUG
-
#define OHCI_PARAM_DEBUG_AT_AR 1
#define OHCI_PARAM_DEBUG_SELFIDS 2
#define OHCI_PARAM_DEBUG_IRQS 4
#define OHCI_PARAM_DEBUG_BUSRESETS 8 /* only effective before chip init */
+#ifdef CONFIG_FIREWIRE_OHCI_DEBUG
+
static int param_debug;
module_param_named(debug, param_debug, int, 0644);
MODULE_PARM_DESC(debug, "Verbose logging (default = 0"
@@ -438,9 +441,10 @@
#else
-#define log_irqs(evt)
-#define log_selfids(node_id, generation, self_id_count, sid)
-#define log_ar_at_event(dir, speed, header, evt)
+#define param_debug 0
+static inline void log_irqs(u32 evt) {}
+static inline void log_selfids(int node_id, int generation, int self_id_count, u32 *s) {}
+static inline void log_ar_at_event(char dir, int speed, u32 *header, int evt) {}
#endif /* CONFIG_FIREWIRE_OHCI_DEBUG */
@@ -460,27 +464,71 @@
reg_read(ohci, OHCI1394_Version);
}
+static int read_phy_reg(struct fw_ohci *ohci, int addr)
+{
+ u32 val;
+ int i;
+
+ reg_write(ohci, OHCI1394_PhyControl, OHCI1394_PhyControl_Read(addr));
+ for (i = 0; i < 10; i++) {
+ val = reg_read(ohci, OHCI1394_PhyControl);
+ if (val & OHCI1394_PhyControl_ReadDone)
+ return OHCI1394_PhyControl_ReadData(val);
+
+ msleep(1);
+ }
+ fw_error("failed to read phy reg\n");
+
+ return -EBUSY;
+}
+
+static int write_phy_reg(const struct fw_ohci *ohci, int addr, u32 val)
+{
+ int i;
+
+ reg_write(ohci, OHCI1394_PhyControl,
+ OHCI1394_PhyControl_Write(addr, val));
+ for (i = 0; i < 100; i++) {
+ val = reg_read(ohci, OHCI1394_PhyControl);
+ if (!(val & OHCI1394_PhyControl_WritePending))
+ return 0;
+
+ msleep(1);
+ }
+ fw_error("failed to write phy reg\n");
+
+ return -EBUSY;
+}
+
static int ohci_update_phy_reg(struct fw_card *card, int addr,
int clear_bits, int set_bits)
{
struct fw_ohci *ohci = fw_ohci(card);
- u32 val, old;
+ int ret;
- reg_write(ohci, OHCI1394_PhyControl, OHCI1394_PhyControl_Read(addr));
- flush_writes(ohci);
- msleep(2);
- val = reg_read(ohci, OHCI1394_PhyControl);
- if ((val & OHCI1394_PhyControl_ReadDone) == 0) {
- fw_error("failed to set phy reg bits.\n");
- return -EBUSY;
- }
+ ret = read_phy_reg(ohci, addr);
+ if (ret < 0)
+ return ret;
- old = OHCI1394_PhyControl_ReadData(val);
- old = (old & ~clear_bits) | set_bits;
- reg_write(ohci, OHCI1394_PhyControl,
- OHCI1394_PhyControl_Write(addr, old));
+ /*
+ * The interrupt status bits are cleared by writing a one bit.
+ * Avoid clearing them unless explicitly requested in set_bits.
+ */
+ if (addr == 5)
+ clear_bits |= PHY_INT_STATUS_BITS;
- return 0;
+ return write_phy_reg(ohci, addr, (ret & ~clear_bits) | set_bits);
+}
+
+static int read_paged_phy_reg(struct fw_ohci *ohci, int page, int addr)
+{
+ int ret;
+
+ ret = ohci_update_phy_reg(&ohci->card, 7, PHY_PAGE_SELECT, page << 5);
+ if (ret < 0)
+ return ret;
+
+ return read_phy_reg(ohci, addr);
}
static int ar_context_add_page(struct ar_context *ctx)
@@ -1495,13 +1543,64 @@
memset(&dest[length], 0, CONFIG_ROM_SIZE - size);
}
+static int configure_1394a_enhancements(struct fw_ohci *ohci)
+{
+ bool enable_1394a;
+ int ret, clear, set, offset;
+
+ /* Check if the driver should configure link and PHY. */
+ if (!(reg_read(ohci, OHCI1394_HCControlSet) &
+ OHCI1394_HCControl_programPhyEnable))
+ return 0;
+
+ /* Paranoia: check whether the PHY supports 1394a, too. */
+ enable_1394a = false;
+ ret = read_phy_reg(ohci, 2);
+ if (ret < 0)
+ return ret;
+ if ((ret & PHY_EXTENDED_REGISTERS) == PHY_EXTENDED_REGISTERS) {
+ ret = read_paged_phy_reg(ohci, 1, 8);
+ if (ret < 0)
+ return ret;
+ if (ret >= 1)
+ enable_1394a = true;
+ }
+
+ if (ohci->quirks & QUIRK_NO_1394A)
+ enable_1394a = false;
+
+ /* Configure PHY and link consistently. */
+ if (enable_1394a) {
+ clear = 0;
+ set = PHY_ENABLE_ACCEL | PHY_ENABLE_MULTI;
+ } else {
+ clear = PHY_ENABLE_ACCEL | PHY_ENABLE_MULTI;
+ set = 0;
+ }
+ ret = ohci_update_phy_reg(&ohci->card, 5, clear, set);
+ if (ret < 0)
+ return ret;
+
+ if (enable_1394a)
+ offset = OHCI1394_HCControlSet;
+ else
+ offset = OHCI1394_HCControlClear;
+ reg_write(ohci, offset, OHCI1394_HCControl_aPhyEnhanceEnable);
+
+ /* Clean up: configuration has been taken care of. */
+ reg_write(ohci, OHCI1394_HCControlClear,
+ OHCI1394_HCControl_programPhyEnable);
+
+ return 0;
+}
+
static int ohci_enable(struct fw_card *card,
const __be32 *config_rom, size_t length)
{
struct fw_ohci *ohci = fw_ohci(card);
struct pci_dev *dev = to_pci_dev(card->device);
u32 lps;
- int i;
+ int i, ret;
if (software_reset(ohci)) {
fw_error("Failed to reset ohci card.\n");
@@ -1565,10 +1664,14 @@
if (param_debug & OHCI_PARAM_DEBUG_BUSRESETS)
reg_write(ohci, OHCI1394_IntMaskSet, OHCI1394_busReset);
+ ret = configure_1394a_enhancements(ohci);
+ if (ret < 0)
+ return ret;
+
/* Activate link_on bit and contender bit in our self ID packets.*/
- if (ohci_update_phy_reg(card, 4, 0,
- PHY_LINK_ACTIVE | PHY_CONTENDER) < 0)
- return -EIO;
+ ret = ohci_update_phy_reg(card, 4, 0, PHY_LINK_ACTIVE | PHY_CONTENDER);
+ if (ret < 0)
+ return ret;
/*
* When the link is not yet enabled, the atomic config rom
@@ -2304,7 +2407,7 @@
};
#ifdef CONFIG_PPC_PMAC
-static void ohci_pmac_on(struct pci_dev *dev)
+static void pmac_ohci_on(struct pci_dev *dev)
{
if (machine_is(powermac)) {
struct device_node *ofn = pci_device_to_OF_node(dev);
@@ -2316,7 +2419,7 @@
}
}
-static void ohci_pmac_off(struct pci_dev *dev)
+static void pmac_ohci_off(struct pci_dev *dev)
{
if (machine_is(powermac)) {
struct device_node *ofn = pci_device_to_OF_node(dev);
@@ -2328,15 +2431,15 @@
}
}
#else
-#define ohci_pmac_on(dev)
-#define ohci_pmac_off(dev)
+static inline void pmac_ohci_on(struct pci_dev *dev) {}
+static inline void pmac_ohci_off(struct pci_dev *dev) {}
#endif /* CONFIG_PPC_PMAC */
static int __devinit pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
struct fw_ohci *ohci;
- u32 bus_options, max_receive, link_speed, version;
+ u32 bus_options, max_receive, link_speed, version, link_enh;
u64 guid;
int i, err, n_ir, n_it;
size_t size;
@@ -2349,7 +2452,7 @@
fw_card_initialize(&ohci->card, &ohci_driver, &dev->dev);
- ohci_pmac_on(dev);
+ pmac_ohci_on(dev);
err = pci_enable_device(dev);
if (err) {
@@ -2389,6 +2492,23 @@
if (param_quirks)
ohci->quirks = param_quirks;
+ /* TI OHCI-Lynx and compatible: set recommended configuration bits. */
+ if (dev->vendor == PCI_VENDOR_ID_TI) {
+ pci_read_config_dword(dev, PCI_CFG_TI_LinkEnh, &link_enh);
+
+ /* adjust latency of ATx FIFO: use 1.7 KB threshold */
+ link_enh &= ~TI_LinkEnh_atx_thresh_mask;
+ link_enh |= TI_LinkEnh_atx_thresh_1_7K;
+
+ /* use priority arbitration for asynchronous responses */
+ link_enh |= TI_LinkEnh_enab_unfair;
+
+ /* required for aPhyEnhanceEnable to work */
+ link_enh |= TI_LinkEnh_enab_accel;
+
+ pci_write_config_dword(dev, PCI_CFG_TI_LinkEnh, link_enh);
+ }
+
ar_context_init(&ohci->ar_request_ctx, ohci,
OHCI1394_AsReqRcvContextControlSet);
@@ -2466,7 +2586,7 @@
pci_disable_device(dev);
fail_free:
kfree(&ohci->card);
- ohci_pmac_off(dev);
+ pmac_ohci_off(dev);
fail:
if (err == -ENOMEM)
fw_error("Out of memory\n");
@@ -2509,7 +2629,7 @@
pci_release_region(dev, 0);
pci_disable_device(dev);
kfree(&ohci->card);
- ohci_pmac_off(dev);
+ pmac_ohci_off(dev);
fw_notify("Removed fw-ohci device.\n");
}
@@ -2530,7 +2650,7 @@
err = pci_set_power_state(dev, pci_choose_state(dev, state));
if (err)
fw_error("pci_set_power_state failed with %d\n", err);
- ohci_pmac_off(dev);
+ pmac_ohci_off(dev);
return 0;
}
@@ -2540,7 +2660,7 @@
struct fw_ohci *ohci = pci_get_drvdata(dev);
int err;
- ohci_pmac_on(dev);
+ pmac_ohci_on(dev);
pci_set_power_state(dev, PCI_D0);
pci_restore_state(dev);
err = pci_enable_device(dev);
diff --git a/drivers/firewire/ohci.h b/drivers/firewire/ohci.h
index ba492d8..3bc9a5d 100644
--- a/drivers/firewire/ohci.h
+++ b/drivers/firewire/ohci.h
@@ -67,7 +67,7 @@
#define OHCI1394_PhyControl_ReadDone 0x80000000
#define OHCI1394_PhyControl_ReadData(r) (((r) & 0x00ff0000) >> 16)
#define OHCI1394_PhyControl_Write(addr, data) (((addr) << 8) | (data) | 0x00004000)
-#define OHCI1394_PhyControl_WriteDone 0x00004000
+#define OHCI1394_PhyControl_WritePending 0x00004000
#define OHCI1394_IsochronousCycleTimer 0x0F0
#define OHCI1394_AsReqFilterHiSet 0x100
#define OHCI1394_AsReqFilterHiClear 0x104
@@ -154,4 +154,12 @@
#define OHCI1394_phy_tcode 0xe
+/* TI extensions */
+
+#define PCI_CFG_TI_LinkEnh 0xf4
+#define TI_LinkEnh_enab_accel 0x00000002
+#define TI_LinkEnh_enab_unfair 0x00000080
+#define TI_LinkEnh_atx_thresh_mask 0x00003000
+#define TI_LinkEnh_atx_thresh_1_7K 0x00001000
+
#endif /* _FIREWIRE_OHCI_H */
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index fee678f..7face91 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1,5 +1,5 @@
#
-# GPIO infrastructure and expanders
+# platform-neutral GPIO infrastructure and expanders
#
config ARCH_WANT_OPTIONAL_GPIOLIB
@@ -139,6 +139,13 @@
Board setup code must specify the model to use, and the start
number for these GPIOs.
+config GPIO_MAX732X_IRQ
+ bool "Interrupt controller support for MAX732x"
+ depends on GPIO_MAX732X=y && GENERIC_HARDIRQS
+ help
+ Say yes here to enable the max732x to be used as an interrupt
+ controller. It requires the driver to be built in the kernel.
+
config GPIO_PCA953X
tristate "PCA953x, PCA955x, TCA64xx, and MAX7310 I/O ports"
depends on I2C
@@ -188,6 +195,13 @@
This driver provides an in-kernel interface to those GPIOs using
platform-neutral GPIO calls.
+config GPIO_TC35892
+ bool "TC35892 GPIOs"
+ depends on MFD_TC35892
+ help
+ This enables support for the GPIOs found on the TC35892
+ I/O Expander.
+
config GPIO_TWL4030
tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
depends on TWL4030_CORE
@@ -264,10 +278,10 @@
If unsure, say N.
config GPIO_LANGWELL
- bool "Intel Moorestown Platform Langwell GPIO support"
+ bool "Intel Langwell/Penwell GPIO support"
depends on PCI
help
- Say Y here to support Intel Moorestown platform GPIO.
+ Say Y here to support Intel Langwell/Penwell GPIO.
config GPIO_TIMBERDALE
bool "Support for timberdale GPIO IP"
@@ -275,6 +289,15 @@
---help---
Add support for the GPIO IP in the timberdale FPGA.
+config GPIO_RDC321X
+ tristate "RDC R-321x GPIO support"
+ depends on PCI && GPIOLIB
+ select MFD_CORE
+ select MFD_RDC321X
+ help
+ Support for the RDC R321x SoC GPIOs over southbridge
+ PCI configuration space.
+
comment "SPI GPIO expanders:"
config GPIO_MAX7301
@@ -310,4 +333,14 @@
To compile this driver as a module, choose M here: the
module will be called ucb1400_gpio.
+comment "MODULbus GPIO expanders:"
+
+config GPIO_JANZ_TTL
+ tristate "Janz VMOD-TTL Digital IO Module"
+ depends on MFD_JANZ_CMODIO
+ help
+ This enables support for the Janz VMOD-TTL Digital IO module.
+ This driver provides support for driving the pins in output
+ mode only. Input mode is not supported.
+
endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 10f3f8d..e53dcff 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -1,4 +1,8 @@
-# gpio support: dedicated expander chips, etc
+# generic gpio support: dedicated expander chips, etc
+#
+# NOTE: platform-specific GPIO drivers don't belong in the
+# drivers/gpio directory; put them with other platform setup
+# code, IRQ controllers, board init, etc.
ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG
@@ -16,6 +20,7 @@
obj-$(CONFIG_GPIO_PCA953X) += pca953x.o
obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o
obj-$(CONFIG_GPIO_PL061) += pl061.o
+obj-$(CONFIG_GPIO_TC35892) += tc35892-gpio.o
obj-$(CONFIG_GPIO_TIMBERDALE) += timbgpio.o
obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o
obj-$(CONFIG_GPIO_UCB1400) += ucb1400_gpio.o
@@ -27,4 +32,6 @@
obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o
obj-$(CONFIG_GPIO_WM8350) += wm8350-gpiolib.o
obj-$(CONFIG_GPIO_WM8994) += wm8994-gpio.o
-obj-$(CONFIG_GPIO_SCH) += sch_gpio.o
\ No newline at end of file
+obj-$(CONFIG_GPIO_SCH) += sch_gpio.o
+obj-$(CONFIG_GPIO_RDC321X) += rdc321x-gpio.o
+obj-$(CONFIG_GPIO_JANZ_TTL) += janz-ttl.o
diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/cs5535-gpio.c
index 0c3c498..e23c068 100644
--- a/drivers/gpio/cs5535-gpio.c
+++ b/drivers/gpio/cs5535-gpio.c
@@ -197,7 +197,7 @@
return 0;
}
-static char *cs5535_gpio_names[] = {
+static const char * const cs5535_gpio_names[] = {
"GPIO0", "GPIO1", "GPIO2", "GPIO3",
"GPIO4", "GPIO5", "GPIO6", "GPIO7",
"GPIO8", "GPIO9", "GPIO10", "GPIO11",
@@ -352,6 +352,6 @@
module_init(cs5535_gpio_init);
module_exit(cs5535_gpio_exit);
-MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>");
+MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index cae1b8c..3ca3654 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -722,7 +722,7 @@
unsigned long flags;
struct gpio_desc *desc;
int status = -EINVAL;
- char *ioname = NULL;
+ const char *ioname = NULL;
/* can't export until sysfs is available ... */
if (!gpio_class.p) {
@@ -753,7 +753,7 @@
struct device *dev;
dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0),
- desc, ioname ? ioname : "gpio%d", gpio);
+ desc, ioname ? ioname : "gpio%u", gpio);
if (!IS_ERR(dev)) {
status = sysfs_create_group(&dev->kobj,
&gpio_attr_group);
@@ -1106,7 +1106,7 @@
fail:
/* failures here can mean systems won't boot... */
if (status)
- pr_err("gpiochip_add: gpios %d..%d (%s) not registered\n",
+ pr_err("gpiochip_add: gpios %d..%d (%s) failed to register\n",
chip->base, chip->base + chip->ngpio - 1,
chip->label ? : "generic");
return status;
@@ -1447,6 +1447,49 @@
}
EXPORT_SYMBOL_GPL(gpio_direction_output);
+/**
+ * gpio_set_debounce - sets @debounce time for a @gpio
+ * @gpio: the gpio to set debounce time
+ * @debounce: debounce time is microseconds
+ */
+int gpio_set_debounce(unsigned gpio, unsigned debounce)
+{
+ unsigned long flags;
+ struct gpio_chip *chip;
+ struct gpio_desc *desc = &gpio_desc[gpio];
+ int status = -EINVAL;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ if (!gpio_is_valid(gpio))
+ goto fail;
+ chip = desc->chip;
+ if (!chip || !chip->set || !chip->set_debounce)
+ goto fail;
+ gpio -= chip->base;
+ if (gpio >= chip->ngpio)
+ goto fail;
+ status = gpio_ensure_requested(desc, gpio);
+ if (status < 0)
+ goto fail;
+
+ /* now we know the gpio is valid and chip won't vanish */
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+
+ might_sleep_if(extra_checks && chip->can_sleep);
+
+ return chip->set_debounce(chip, gpio, debounce);
+
+fail:
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ if (status)
+ pr_debug("%s: gpio-%d status %d\n",
+ __func__, gpio, status);
+
+ return status;
+}
+EXPORT_SYMBOL_GPL(gpio_set_debounce);
/* I/O calls are only valid after configuration completed; the relevant
* "is this a valid GPIO" error checks should already have been done.
diff --git a/drivers/gpio/it8761e_gpio.c b/drivers/gpio/it8761e_gpio.c
index 41a9388..48fc43c 100644
--- a/drivers/gpio/it8761e_gpio.c
+++ b/drivers/gpio/it8761e_gpio.c
@@ -217,7 +217,10 @@
static void __exit it8761e_gpio_exit(void)
{
if (gpio_ba) {
- gpiochip_remove(&it8761e_gpio_chip);
+ int ret = gpiochip_remove(&it8761e_gpio_chip);
+
+ WARN(ret, "%s(): gpiochip_remove() failed, ret=%d\n",
+ __func__, ret);
release_region(gpio_ba, GPIO_IOSIZE);
gpio_ba = 0;
diff --git a/drivers/gpio/janz-ttl.c b/drivers/gpio/janz-ttl.c
new file mode 100644
index 0000000..813ac07
--- /dev/null
+++ b/drivers/gpio/janz-ttl.c
@@ -0,0 +1,258 @@
+/*
+ * Janz MODULbus VMOD-TTL GPIO Driver
+ *
+ * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/janz.h>
+
+#define DRV_NAME "janz-ttl"
+
+#define PORTA_DIRECTION 0x23
+#define PORTB_DIRECTION 0x2B
+#define PORTC_DIRECTION 0x06
+#define PORTA_IOCTL 0x24
+#define PORTB_IOCTL 0x2C
+#define PORTC_IOCTL 0x07
+
+#define MASTER_INT_CTL 0x00
+#define MASTER_CONF_CTL 0x01
+
+#define CONF_PAE (1 << 2)
+#define CONF_PBE (1 << 7)
+#define CONF_PCE (1 << 4)
+
+struct ttl_control_regs {
+ __be16 portc;
+ __be16 portb;
+ __be16 porta;
+ __be16 control;
+};
+
+struct ttl_module {
+ struct gpio_chip gpio;
+
+ /* base address of registers */
+ struct ttl_control_regs __iomem *regs;
+
+ u8 portc_shadow;
+ u8 portb_shadow;
+ u8 porta_shadow;
+
+ spinlock_t lock;
+};
+
+static int ttl_get_value(struct gpio_chip *gpio, unsigned offset)
+{
+ struct ttl_module *mod = dev_get_drvdata(gpio->dev);
+ u8 *shadow;
+ int ret;
+
+ if (offset < 8) {
+ shadow = &mod->porta_shadow;
+ } else if (offset < 16) {
+ shadow = &mod->portb_shadow;
+ offset -= 8;
+ } else {
+ shadow = &mod->portc_shadow;
+ offset -= 16;
+ }
+
+ spin_lock(&mod->lock);
+ ret = *shadow & (1 << offset);
+ spin_unlock(&mod->lock);
+ return ret;
+}
+
+static void ttl_set_value(struct gpio_chip *gpio, unsigned offset, int value)
+{
+ struct ttl_module *mod = dev_get_drvdata(gpio->dev);
+ void __iomem *port;
+ u8 *shadow;
+
+ if (offset < 8) {
+ port = &mod->regs->porta;
+ shadow = &mod->porta_shadow;
+ } else if (offset < 16) {
+ port = &mod->regs->portb;
+ shadow = &mod->portb_shadow;
+ offset -= 8;
+ } else {
+ port = &mod->regs->portc;
+ shadow = &mod->portc_shadow;
+ offset -= 16;
+ }
+
+ spin_lock(&mod->lock);
+ if (value)
+ *shadow |= (1 << offset);
+ else
+ *shadow &= ~(1 << offset);
+
+ iowrite16be(*shadow, port);
+ spin_unlock(&mod->lock);
+}
+
+static void __devinit ttl_write_reg(struct ttl_module *mod, u8 reg, u16 val)
+{
+ iowrite16be(reg, &mod->regs->control);
+ iowrite16be(val, &mod->regs->control);
+}
+
+static void __devinit ttl_setup_device(struct ttl_module *mod)
+{
+ /* reset the device to a known state */
+ iowrite16be(0x0000, &mod->regs->control);
+ iowrite16be(0x0001, &mod->regs->control);
+ iowrite16be(0x0000, &mod->regs->control);
+
+ /* put all ports in open-drain mode */
+ ttl_write_reg(mod, PORTA_IOCTL, 0x00ff);
+ ttl_write_reg(mod, PORTB_IOCTL, 0x00ff);
+ ttl_write_reg(mod, PORTC_IOCTL, 0x000f);
+
+ /* set all ports as outputs */
+ ttl_write_reg(mod, PORTA_DIRECTION, 0x0000);
+ ttl_write_reg(mod, PORTB_DIRECTION, 0x0000);
+ ttl_write_reg(mod, PORTC_DIRECTION, 0x0000);
+
+ /* set all ports to drive zeroes */
+ iowrite16be(0x0000, &mod->regs->porta);
+ iowrite16be(0x0000, &mod->regs->portb);
+ iowrite16be(0x0000, &mod->regs->portc);
+
+ /* enable all ports */
+ ttl_write_reg(mod, MASTER_CONF_CTL, CONF_PAE | CONF_PBE | CONF_PCE);
+}
+
+static int __devinit ttl_probe(struct platform_device *pdev)
+{
+ struct janz_platform_data *pdata;
+ struct device *dev = &pdev->dev;
+ struct ttl_module *mod;
+ struct gpio_chip *gpio;
+ struct resource *res;
+ int ret;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(dev, "no platform data\n");
+ ret = -ENXIO;
+ goto out_return;
+ }
+
+ mod = kzalloc(sizeof(*mod), GFP_KERNEL);
+ if (!mod) {
+ dev_err(dev, "unable to allocate private data\n");
+ ret = -ENOMEM;
+ goto out_return;
+ }
+
+ platform_set_drvdata(pdev, mod);
+ spin_lock_init(&mod->lock);
+
+ /* get access to the MODULbus registers for this module */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "MODULbus registers not found\n");
+ ret = -ENODEV;
+ goto out_free_mod;
+ }
+
+ mod->regs = ioremap(res->start, resource_size(res));
+ if (!mod->regs) {
+ dev_err(dev, "MODULbus registers not ioremap\n");
+ ret = -ENOMEM;
+ goto out_free_mod;
+ }
+
+ ttl_setup_device(mod);
+
+ /* Initialize the GPIO data structures */
+ gpio = &mod->gpio;
+ gpio->dev = &pdev->dev;
+ gpio->label = pdev->name;
+ gpio->get = ttl_get_value;
+ gpio->set = ttl_set_value;
+ gpio->owner = THIS_MODULE;
+
+ /* request dynamic allocation */
+ gpio->base = -1;
+ gpio->ngpio = 20;
+
+ ret = gpiochip_add(gpio);
+ if (ret) {
+ dev_err(dev, "unable to add GPIO chip\n");
+ goto out_iounmap_regs;
+ }
+
+ dev_info(&pdev->dev, "module %d: registered GPIO device\n",
+ pdata->modno);
+ return 0;
+
+out_iounmap_regs:
+ iounmap(mod->regs);
+out_free_mod:
+ kfree(mod);
+out_return:
+ return ret;
+}
+
+static int __devexit ttl_remove(struct platform_device *pdev)
+{
+ struct ttl_module *mod = platform_get_drvdata(pdev);
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ ret = gpiochip_remove(&mod->gpio);
+ if (ret) {
+ dev_err(dev, "unable to remove GPIO chip\n");
+ return ret;
+ }
+
+ iounmap(mod->regs);
+ kfree(mod);
+ return 0;
+}
+
+static struct platform_driver ttl_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = ttl_probe,
+ .remove = __devexit_p(ttl_remove),
+};
+
+static int __init ttl_init(void)
+{
+ return platform_driver_register(&ttl_driver);
+}
+
+static void __exit ttl_exit(void)
+{
+ platform_driver_unregister(&ttl_driver);
+}
+
+MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
+MODULE_DESCRIPTION("Janz MODULbus VMOD-TTL Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:janz-ttl");
+
+module_init(ttl_init);
+module_exit(ttl_exit);
diff --git a/drivers/gpio/langwell_gpio.c b/drivers/gpio/langwell_gpio.c
index 00c3a14..8383a8d 100644
--- a/drivers/gpio/langwell_gpio.c
+++ b/drivers/gpio/langwell_gpio.c
@@ -17,6 +17,7 @@
/* Supports:
* Moorestown platform Langwell chip.
+ * Medfield platform Penwell chip.
*/
#include <linux/module.h>
@@ -31,44 +32,65 @@
#include <linux/gpio.h>
#include <linux/slab.h>
-struct lnw_gpio_register {
- u32 GPLR[2];
- u32 GPDR[2];
- u32 GPSR[2];
- u32 GPCR[2];
- u32 GRER[2];
- u32 GFER[2];
- u32 GEDR[2];
+/*
+ * Langwell chip has 64 pins and thus there are 2 32bit registers to control
+ * each feature, while Penwell chip has 96 pins for each block, and need 3 32bit
+ * registers to control them, so we only define the order here instead of a
+ * structure, to get a bit offset for a pin (use GPDR as an example):
+ *
+ * nreg = ngpio / 32;
+ * reg = offset / 32;
+ * bit = offset % 32;
+ * reg_addr = reg_base + GPDR * nreg * 4 + reg * 4;
+ *
+ * so the bit of reg_addr is to control pin offset's GPDR feature
+*/
+
+enum GPIO_REG {
+ GPLR = 0, /* pin level read-only */
+ GPDR, /* pin direction */
+ GPSR, /* pin set */
+ GPCR, /* pin clear */
+ GRER, /* rising edge detect */
+ GFER, /* falling edge detect */
+ GEDR, /* edge detect result */
};
struct lnw_gpio {
struct gpio_chip chip;
- struct lnw_gpio_register *reg_base;
+ void *reg_base;
spinlock_t lock;
unsigned irq_base;
};
-static int lnw_gpio_get(struct gpio_chip *chip, unsigned offset)
+static void __iomem *gpio_reg(struct gpio_chip *chip, unsigned offset,
+ enum GPIO_REG reg_type)
{
struct lnw_gpio *lnw = container_of(chip, struct lnw_gpio, chip);
+ unsigned nreg = chip->ngpio / 32;
u8 reg = offset / 32;
- void __iomem *gplr;
+ void __iomem *ptr;
- gplr = (void __iomem *)(&lnw->reg_base->GPLR[reg]);
+ ptr = (void __iomem *)(lnw->reg_base + reg_type * nreg * 4 + reg * 4);
+ return ptr;
+}
+
+static int lnw_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ void __iomem *gplr = gpio_reg(chip, offset, GPLR);
+
return readl(gplr) & BIT(offset % 32);
}
static void lnw_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
- struct lnw_gpio *lnw = container_of(chip, struct lnw_gpio, chip);
- u8 reg = offset / 32;
void __iomem *gpsr, *gpcr;
if (value) {
- gpsr = (void __iomem *)(&lnw->reg_base->GPSR[reg]);
+ gpsr = gpio_reg(chip, offset, GPSR);
writel(BIT(offset % 32), gpsr);
} else {
- gpcr = (void __iomem *)(&lnw->reg_base->GPCR[reg]);
+ gpcr = gpio_reg(chip, offset, GPCR);
writel(BIT(offset % 32), gpcr);
}
}
@@ -76,12 +98,10 @@
static int lnw_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
struct lnw_gpio *lnw = container_of(chip, struct lnw_gpio, chip);
- u8 reg = offset / 32;
+ void __iomem *gpdr = gpio_reg(chip, offset, GPDR);
u32 value;
unsigned long flags;
- void __iomem *gpdr;
- gpdr = (void __iomem *)(&lnw->reg_base->GPDR[reg]);
spin_lock_irqsave(&lnw->lock, flags);
value = readl(gpdr);
value &= ~BIT(offset % 32);
@@ -94,12 +114,10 @@
unsigned offset, int value)
{
struct lnw_gpio *lnw = container_of(chip, struct lnw_gpio, chip);
- u8 reg = offset / 32;
+ void __iomem *gpdr = gpio_reg(chip, offset, GPDR);
unsigned long flags;
- void __iomem *gpdr;
lnw_gpio_set(chip, offset, value);
- gpdr = (void __iomem *)(&lnw->reg_base->GPDR[reg]);
spin_lock_irqsave(&lnw->lock, flags);
value = readl(gpdr);
value |= BIT(offset % 32);;
@@ -118,11 +136,10 @@
{
struct lnw_gpio *lnw = get_irq_chip_data(irq);
u32 gpio = irq - lnw->irq_base;
- u8 reg = gpio / 32;
unsigned long flags;
u32 value;
- void __iomem *grer = (void __iomem *)(&lnw->reg_base->GRER[reg]);
- void __iomem *gfer = (void __iomem *)(&lnw->reg_base->GFER[reg]);
+ void __iomem *grer = gpio_reg(&lnw->chip, gpio, GRER);
+ void __iomem *gfer = gpio_reg(&lnw->chip, gpio, GFER);
if (gpio >= lnw->chip.ngpio)
return -EINVAL;
@@ -158,8 +175,10 @@
.set_type = lnw_irq_type,
};
-static struct pci_device_id lnw_gpio_ids[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080f) },
+static DEFINE_PCI_DEVICE_TABLE(lnw_gpio_ids) = { /* pin number */
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080f), .driver_data = 64 },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081f), .driver_data = 96 },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081a), .driver_data = 96 },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, lnw_gpio_ids);
@@ -167,17 +186,17 @@
static void lnw_irq_handler(unsigned irq, struct irq_desc *desc)
{
struct lnw_gpio *lnw = (struct lnw_gpio *)get_irq_data(irq);
- u32 reg, gpio;
+ u32 base, gpio;
void __iomem *gedr;
u32 gedr_v;
/* check GPIO controller to check which pin triggered the interrupt */
- for (reg = 0; reg < lnw->chip.ngpio / 32; reg++) {
- gedr = (void __iomem *)(&lnw->reg_base->GEDR[reg]);
+ for (base = 0; base < lnw->chip.ngpio; base += 32) {
+ gedr = gpio_reg(&lnw->chip, base, GEDR);
gedr_v = readl(gedr);
if (!gedr_v)
continue;
- for (gpio = reg*32; gpio < reg*32+32; gpio++)
+ for (gpio = base; gpio < base + 32; gpio++)
if (gedr_v & BIT(gpio % 32)) {
pr_debug("pin %d triggered\n", gpio);
generic_handle_irq(lnw->irq_base + gpio);
@@ -245,7 +264,7 @@
lnw->chip.set = lnw_gpio_set;
lnw->chip.to_irq = lnw_gpio_to_irq;
lnw->chip.base = gpio_base;
- lnw->chip.ngpio = 64;
+ lnw->chip.ngpio = id->driver_data;
lnw->chip.can_sleep = 0;
pci_set_drvdata(pdev, lnw);
retval = gpiochip_add(&lnw->chip);
diff --git a/drivers/gpio/max732x.c b/drivers/gpio/max732x.c
index f786824..9cad60f 100644
--- a/drivers/gpio/max732x.c
+++ b/drivers/gpio/max732x.c
@@ -17,7 +17,8 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/gpio.h>
-
+#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/i2c.h>
#include <linux/i2c/max732x.h>
@@ -31,7 +32,8 @@
* - Open Drain I/O
*
* designated by 'O', 'I' and 'P' individually according to MAXIM's
- * datasheets.
+ * datasheets. 'I' and 'P' ports are interrupt capables, some with
+ * a dedicated interrupt mask.
*
* There are two groups of I/O ports, each group usually includes
* up to 8 I/O ports, and is accessed by a specific I2C address:
@@ -44,7 +46,8 @@
*
* Within each group of ports, there are five known combinations of
* I/O ports: 4I4O, 4P4O, 8I, 8P, 8O, see the definitions below for
- * the detailed organization of these ports.
+ * the detailed organization of these ports. Only Goup A is interrupt
+ * capable.
*
* GPIO numbers start from 'gpio_base + 0' to 'gpio_base + 8/16',
* and GPIOs from GROUP_A are numbered before those from GROUP_B
@@ -68,16 +71,47 @@
#define GROUP_A(x) ((x) & 0xffff) /* I2C Addr: 0b'110xxxx */
#define GROUP_B(x) ((x) << 16) /* I2C Addr: 0b'101xxxx */
+#define INT_NONE 0x0 /* No interrupt capability */
+#define INT_NO_MASK 0x1 /* Has interrupts, no mask */
+#define INT_INDEP_MASK 0x2 /* Has interrupts, independent mask */
+#define INT_MERGED_MASK 0x3 /* Has interrupts, merged mask */
+
+#define INT_CAPS(x) (((uint64_t)(x)) << 32)
+
+enum {
+ MAX7319,
+ MAX7320,
+ MAX7321,
+ MAX7322,
+ MAX7323,
+ MAX7324,
+ MAX7325,
+ MAX7326,
+ MAX7327,
+};
+
+static uint64_t max732x_features[] = {
+ [MAX7319] = GROUP_A(IO_8I) | INT_CAPS(INT_MERGED_MASK),
+ [MAX7320] = GROUP_B(IO_8O),
+ [MAX7321] = GROUP_A(IO_8P) | INT_CAPS(INT_NO_MASK),
+ [MAX7322] = GROUP_A(IO_4I4O) | INT_CAPS(INT_MERGED_MASK),
+ [MAX7323] = GROUP_A(IO_4P4O) | INT_CAPS(INT_INDEP_MASK),
+ [MAX7324] = GROUP_A(IO_8I) | GROUP_B(IO_8O) | INT_CAPS(INT_MERGED_MASK),
+ [MAX7325] = GROUP_A(IO_8P) | GROUP_B(IO_8O) | INT_CAPS(INT_NO_MASK),
+ [MAX7326] = GROUP_A(IO_4I4O) | GROUP_B(IO_8O) | INT_CAPS(INT_MERGED_MASK),
+ [MAX7327] = GROUP_A(IO_4P4O) | GROUP_B(IO_8O) | INT_CAPS(INT_NO_MASK),
+};
+
static const struct i2c_device_id max732x_id[] = {
- { "max7319", GROUP_A(IO_8I) },
- { "max7320", GROUP_B(IO_8O) },
- { "max7321", GROUP_A(IO_8P) },
- { "max7322", GROUP_A(IO_4I4O) },
- { "max7323", GROUP_A(IO_4P4O) },
- { "max7324", GROUP_A(IO_8I) | GROUP_B(IO_8O) },
- { "max7325", GROUP_A(IO_8P) | GROUP_B(IO_8O) },
- { "max7326", GROUP_A(IO_4I4O) | GROUP_B(IO_8O) },
- { "max7327", GROUP_A(IO_4P4O) | GROUP_B(IO_8O) },
+ { "max7319", MAX7319 },
+ { "max7320", MAX7320 },
+ { "max7321", MAX7321 },
+ { "max7322", MAX7322 },
+ { "max7323", MAX7323 },
+ { "max7324", MAX7324 },
+ { "max7325", MAX7325 },
+ { "max7326", MAX7326 },
+ { "max7327", MAX7327 },
{ },
};
MODULE_DEVICE_TABLE(i2c, max732x_id);
@@ -96,9 +130,19 @@
struct mutex lock;
uint8_t reg_out[2];
+
+#ifdef CONFIG_GPIO_MAX732X_IRQ
+ struct mutex irq_lock;
+ int irq_base;
+ uint8_t irq_mask;
+ uint8_t irq_mask_cur;
+ uint8_t irq_trig_raise;
+ uint8_t irq_trig_fall;
+ uint8_t irq_features;
+#endif
};
-static int max732x_write(struct max732x_chip *chip, int group_a, uint8_t val)
+static int max732x_writeb(struct max732x_chip *chip, int group_a, uint8_t val)
{
struct i2c_client *client;
int ret;
@@ -113,7 +157,7 @@
return 0;
}
-static int max732x_read(struct max732x_chip *chip, int group_a, uint8_t *val)
+static int max732x_readb(struct max732x_chip *chip, int group_a, uint8_t *val)
{
struct i2c_client *client;
int ret;
@@ -142,7 +186,7 @@
chip = container_of(gc, struct max732x_chip, gpio_chip);
- ret = max732x_read(chip, is_group_a(chip, off), ®_val);
+ ret = max732x_readb(chip, is_group_a(chip, off), ®_val);
if (ret < 0)
return 0;
@@ -162,7 +206,7 @@
reg_out = (off > 7) ? chip->reg_out[1] : chip->reg_out[0];
reg_out = (val) ? reg_out | mask : reg_out & ~mask;
- ret = max732x_write(chip, is_group_a(chip, off), reg_out);
+ ret = max732x_writeb(chip, is_group_a(chip, off), reg_out);
if (ret < 0)
goto out;
@@ -188,6 +232,13 @@
return -EACCES;
}
+ /*
+ * Open-drain pins must be set to high impedance (which is
+ * equivalent to output-high) to be turned into an input.
+ */
+ if ((mask & chip->dir_output))
+ max732x_gpio_set_value(gc, off, 1);
+
return 0;
}
@@ -209,12 +260,278 @@
return 0;
}
+#ifdef CONFIG_GPIO_MAX732X_IRQ
+static int max732x_writew(struct max732x_chip *chip, uint16_t val)
+{
+ int ret;
+
+ val = cpu_to_le16(val);
+
+ ret = i2c_master_send(chip->client_group_a, (char *)&val, 2);
+ if (ret < 0) {
+ dev_err(&chip->client_group_a->dev, "failed writing\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int max732x_readw(struct max732x_chip *chip, uint16_t *val)
+{
+ int ret;
+
+ ret = i2c_master_recv(chip->client_group_a, (char *)val, 2);
+ if (ret < 0) {
+ dev_err(&chip->client_group_a->dev, "failed reading\n");
+ return ret;
+ }
+
+ *val = le16_to_cpu(*val);
+ return 0;
+}
+
+static void max732x_irq_update_mask(struct max732x_chip *chip)
+{
+ uint16_t msg;
+
+ if (chip->irq_mask == chip->irq_mask_cur)
+ return;
+
+ chip->irq_mask = chip->irq_mask_cur;
+
+ if (chip->irq_features == INT_NO_MASK)
+ return;
+
+ mutex_lock(&chip->lock);
+
+ switch (chip->irq_features) {
+ case INT_INDEP_MASK:
+ msg = (chip->irq_mask << 8) | chip->reg_out[0];
+ max732x_writew(chip, msg);
+ break;
+
+ case INT_MERGED_MASK:
+ msg = chip->irq_mask | chip->reg_out[0];
+ max732x_writeb(chip, 1, (uint8_t)msg);
+ break;
+ }
+
+ mutex_unlock(&chip->lock);
+}
+
+static int max732x_gpio_to_irq(struct gpio_chip *gc, unsigned off)
+{
+ struct max732x_chip *chip;
+
+ chip = container_of(gc, struct max732x_chip, gpio_chip);
+ return chip->irq_base + off;
+}
+
+static void max732x_irq_mask(unsigned int irq)
+{
+ struct max732x_chip *chip = get_irq_chip_data(irq);
+
+ chip->irq_mask_cur &= ~(1 << (irq - chip->irq_base));
+}
+
+static void max732x_irq_unmask(unsigned int irq)
+{
+ struct max732x_chip *chip = get_irq_chip_data(irq);
+
+ chip->irq_mask_cur |= 1 << (irq - chip->irq_base);
+}
+
+static void max732x_irq_bus_lock(unsigned int irq)
+{
+ struct max732x_chip *chip = get_irq_chip_data(irq);
+
+ mutex_lock(&chip->irq_lock);
+ chip->irq_mask_cur = chip->irq_mask;
+}
+
+static void max732x_irq_bus_sync_unlock(unsigned int irq)
+{
+ struct max732x_chip *chip = get_irq_chip_data(irq);
+
+ max732x_irq_update_mask(chip);
+ mutex_unlock(&chip->irq_lock);
+}
+
+static int max732x_irq_set_type(unsigned int irq, unsigned int type)
+{
+ struct max732x_chip *chip = get_irq_chip_data(irq);
+ uint16_t off = irq - chip->irq_base;
+ uint16_t mask = 1 << off;
+
+ if (!(mask & chip->dir_input)) {
+ dev_dbg(&chip->client->dev, "%s port %d is output only\n",
+ chip->client->name, off);
+ return -EACCES;
+ }
+
+ if (!(type & IRQ_TYPE_EDGE_BOTH)) {
+ dev_err(&chip->client->dev, "irq %d: unsupported type %d\n",
+ irq, type);
+ return -EINVAL;
+ }
+
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ chip->irq_trig_fall |= mask;
+ else
+ chip->irq_trig_fall &= ~mask;
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ chip->irq_trig_raise |= mask;
+ else
+ chip->irq_trig_raise &= ~mask;
+
+ return max732x_gpio_direction_input(&chip->gpio_chip, off);
+}
+
+static struct irq_chip max732x_irq_chip = {
+ .name = "max732x",
+ .mask = max732x_irq_mask,
+ .unmask = max732x_irq_unmask,
+ .bus_lock = max732x_irq_bus_lock,
+ .bus_sync_unlock = max732x_irq_bus_sync_unlock,
+ .set_type = max732x_irq_set_type,
+};
+
+static uint8_t max732x_irq_pending(struct max732x_chip *chip)
+{
+ uint8_t cur_stat;
+ uint8_t old_stat;
+ uint8_t trigger;
+ uint8_t pending;
+ uint16_t status;
+ int ret;
+
+ ret = max732x_readw(chip, &status);
+ if (ret)
+ return 0;
+
+ trigger = status >> 8;
+ trigger &= chip->irq_mask;
+
+ if (!trigger)
+ return 0;
+
+ cur_stat = status & 0xFF;
+ cur_stat &= chip->irq_mask;
+
+ old_stat = cur_stat ^ trigger;
+
+ pending = (old_stat & chip->irq_trig_fall) |
+ (cur_stat & chip->irq_trig_raise);
+ pending &= trigger;
+
+ return pending;
+}
+
+static irqreturn_t max732x_irq_handler(int irq, void *devid)
+{
+ struct max732x_chip *chip = devid;
+ uint8_t pending;
+ uint8_t level;
+
+ pending = max732x_irq_pending(chip);
+
+ if (!pending)
+ return IRQ_HANDLED;
+
+ do {
+ level = __ffs(pending);
+ handle_nested_irq(level + chip->irq_base);
+
+ pending &= ~(1 << level);
+ } while (pending);
+
+ return IRQ_HANDLED;
+}
+
+static int max732x_irq_setup(struct max732x_chip *chip,
+ const struct i2c_device_id *id)
+{
+ struct i2c_client *client = chip->client;
+ struct max732x_platform_data *pdata = client->dev.platform_data;
+ int has_irq = max732x_features[id->driver_data] >> 32;
+ int ret;
+
+ if (pdata->irq_base && has_irq != INT_NONE) {
+ int lvl;
+
+ chip->irq_base = pdata->irq_base;
+ chip->irq_features = has_irq;
+ mutex_init(&chip->irq_lock);
+
+ for (lvl = 0; lvl < chip->gpio_chip.ngpio; lvl++) {
+ int irq = lvl + chip->irq_base;
+
+ if (!(chip->dir_input & (1 << lvl)))
+ continue;
+
+ set_irq_chip_data(irq, chip);
+ set_irq_chip_and_handler(irq, &max732x_irq_chip,
+ handle_edge_irq);
+ set_irq_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ set_irq_noprobe(irq);
+#endif
+ }
+
+ ret = request_threaded_irq(client->irq,
+ NULL,
+ max732x_irq_handler,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ dev_name(&client->dev), chip);
+ if (ret) {
+ dev_err(&client->dev, "failed to request irq %d\n",
+ client->irq);
+ goto out_failed;
+ }
+
+ chip->gpio_chip.to_irq = max732x_gpio_to_irq;
+ }
+
+ return 0;
+
+out_failed:
+ chip->irq_base = 0;
+ return ret;
+}
+
+static void max732x_irq_teardown(struct max732x_chip *chip)
+{
+ if (chip->irq_base)
+ free_irq(chip->client->irq, chip);
+}
+#else /* CONFIG_GPIO_MAX732X_IRQ */
+static int max732x_irq_setup(struct max732x_chip *chip,
+ const struct i2c_device_id *id)
+{
+ struct i2c_client *client = chip->client;
+ struct max732x_platform_data *pdata = client->dev.platform_data;
+ int has_irq = max732x_features[id->driver_data] >> 32;
+
+ if (pdata->irq_base && has_irq != INT_NONE)
+ dev_warn(&client->dev, "interrupt support not compiled in\n");
+
+ return 0;
+}
+
+static void max732x_irq_teardown(struct max732x_chip *chip)
+{
+}
+#endif
+
static int __devinit max732x_setup_gpio(struct max732x_chip *chip,
const struct i2c_device_id *id,
unsigned gpio_start)
{
struct gpio_chip *gc = &chip->gpio_chip;
- uint32_t id_data = id->driver_data;
+ uint32_t id_data = (uint32_t)max732x_features[id->driver_data];
int i, port = 0;
for (i = 0; i < 16; i++, id_data >>= 2) {
@@ -285,14 +602,14 @@
switch (client->addr & 0x70) {
case 0x60:
chip->client_group_a = client;
- if (nr_port > 7) {
+ if (nr_port > 8) {
c = i2c_new_dummy(client->adapter, addr_b);
chip->client_group_b = chip->client_dummy = c;
}
break;
case 0x50:
chip->client_group_b = client;
- if (nr_port > 7) {
+ if (nr_port > 8) {
c = i2c_new_dummy(client->adapter, addr_a);
chip->client_group_a = chip->client_dummy = c;
}
@@ -306,9 +623,13 @@
mutex_init(&chip->lock);
- max732x_read(chip, is_group_a(chip, 0), &chip->reg_out[0]);
- if (nr_port > 7)
- max732x_read(chip, is_group_a(chip, 8), &chip->reg_out[1]);
+ max732x_readb(chip, is_group_a(chip, 0), &chip->reg_out[0]);
+ if (nr_port > 8)
+ max732x_readb(chip, is_group_a(chip, 8), &chip->reg_out[1]);
+
+ ret = max732x_irq_setup(chip, id);
+ if (ret)
+ goto out_failed;
ret = gpiochip_add(&chip->gpio_chip);
if (ret)
@@ -325,6 +646,7 @@
return 0;
out_failed:
+ max732x_irq_teardown(chip);
kfree(chip);
return ret;
}
@@ -352,6 +674,8 @@
return ret;
}
+ max732x_irq_teardown(chip);
+
/* unregister any dummy i2c_client */
if (chip->client_dummy)
i2c_unregister_device(chip->client_dummy);
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index f156ab3..a2b12aa 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -73,7 +73,7 @@
struct i2c_client *client;
struct pca953x_platform_data *dyn_pdata;
struct gpio_chip gpio_chip;
- char **names;
+ const char *const *names;
};
static int pca953x_write_reg(struct pca953x_chip *chip, int reg, uint16_t val)
diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c
index 105701a..ee568c8 100644
--- a/drivers/gpio/pl061.c
+++ b/drivers/gpio/pl061.c
@@ -164,7 +164,7 @@
unsigned long flags;
u8 gpiois, gpioibe, gpioiev;
- if (offset < 0 || offset > PL061_GPIO_NR)
+ if (offset < 0 || offset >= PL061_GPIO_NR)
return -EINVAL;
spin_lock_irqsave(&chip->irq_lock, flags);
diff --git a/drivers/gpio/rdc321x-gpio.c b/drivers/gpio/rdc321x-gpio.c
new file mode 100644
index 0000000..2762698
--- /dev/null
+++ b/drivers/gpio/rdc321x-gpio.c
@@ -0,0 +1,246 @@
+/*
+ * RDC321x GPIO driver
+ *
+ * Copyright (C) 2008, Volker Weiss <dev@tintuc.de>
+ * Copyright (C) 2007-2010 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/gpio.h>
+#include <linux/mfd/rdc321x.h>
+#include <linux/slab.h>
+
+struct rdc321x_gpio {
+ spinlock_t lock;
+ struct pci_dev *sb_pdev;
+ u32 data_reg[2];
+ int reg1_ctrl_base;
+ int reg1_data_base;
+ int reg2_ctrl_base;
+ int reg2_data_base;
+ struct gpio_chip chip;
+};
+
+/* read GPIO pin */
+static int rdc_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+ struct rdc321x_gpio *gpch;
+ u32 value = 0;
+ int reg;
+
+ gpch = container_of(chip, struct rdc321x_gpio, chip);
+ reg = gpio < 32 ? gpch->reg1_data_base : gpch->reg2_data_base;
+
+ spin_lock(&gpch->lock);
+ pci_write_config_dword(gpch->sb_pdev, reg,
+ gpch->data_reg[gpio < 32 ? 0 : 1]);
+ pci_read_config_dword(gpch->sb_pdev, reg, &value);
+ spin_unlock(&gpch->lock);
+
+ return (1 << (gpio & 0x1f)) & value ? 1 : 0;
+}
+
+static void rdc_gpio_set_value_impl(struct gpio_chip *chip,
+ unsigned gpio, int value)
+{
+ struct rdc321x_gpio *gpch;
+ int reg = (gpio < 32) ? 0 : 1;
+
+ gpch = container_of(chip, struct rdc321x_gpio, chip);
+
+ if (value)
+ gpch->data_reg[reg] |= 1 << (gpio & 0x1f);
+ else
+ gpch->data_reg[reg] &= ~(1 << (gpio & 0x1f));
+
+ pci_write_config_dword(gpch->sb_pdev,
+ reg ? gpch->reg2_data_base : gpch->reg1_data_base,
+ gpch->data_reg[reg]);
+}
+
+/* set GPIO pin to value */
+static void rdc_gpio_set_value(struct gpio_chip *chip,
+ unsigned gpio, int value)
+{
+ struct rdc321x_gpio *gpch;
+
+ gpch = container_of(chip, struct rdc321x_gpio, chip);
+ spin_lock(&gpch->lock);
+ rdc_gpio_set_value_impl(chip, gpio, value);
+ spin_unlock(&gpch->lock);
+}
+
+static int rdc_gpio_config(struct gpio_chip *chip,
+ unsigned gpio, int value)
+{
+ struct rdc321x_gpio *gpch;
+ int err;
+ u32 reg;
+
+ gpch = container_of(chip, struct rdc321x_gpio, chip);
+
+ spin_lock(&gpch->lock);
+ err = pci_read_config_dword(gpch->sb_pdev, gpio < 32 ?
+ gpch->reg1_ctrl_base : gpch->reg2_ctrl_base, ®);
+ if (err)
+ goto unlock;
+
+ reg |= 1 << (gpio & 0x1f);
+
+ err = pci_write_config_dword(gpch->sb_pdev, gpio < 32 ?
+ gpch->reg1_ctrl_base : gpch->reg2_ctrl_base, reg);
+ if (err)
+ goto unlock;
+
+ rdc_gpio_set_value_impl(chip, gpio, value);
+
+unlock:
+ spin_unlock(&gpch->lock);
+
+ return err;
+}
+
+/* configure GPIO pin as input */
+static int rdc_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+ return rdc_gpio_config(chip, gpio, 1);
+}
+
+/*
+ * Cache the initial value of both GPIO data registers
+ */
+static int __devinit rdc321x_gpio_probe(struct platform_device *pdev)
+{
+ int err;
+ struct resource *r;
+ struct rdc321x_gpio *rdc321x_gpio_dev;
+ struct rdc321x_gpio_pdata *pdata;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data supplied\n");
+ return -ENODEV;
+ }
+
+ rdc321x_gpio_dev = kzalloc(sizeof(struct rdc321x_gpio), GFP_KERNEL);
+ if (!rdc321x_gpio_dev) {
+ dev_err(&pdev->dev, "failed to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_IO, "gpio-reg1");
+ if (!r) {
+ dev_err(&pdev->dev, "failed to get gpio-reg1 resource\n");
+ err = -ENODEV;
+ goto out_free;
+ }
+
+ spin_lock_init(&rdc321x_gpio_dev->lock);
+ rdc321x_gpio_dev->sb_pdev = pdata->sb_pdev;
+ rdc321x_gpio_dev->reg1_ctrl_base = r->start;
+ rdc321x_gpio_dev->reg1_data_base = r->start + 0x4;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_IO, "gpio-reg2");
+ if (!r) {
+ dev_err(&pdev->dev, "failed to get gpio-reg2 resource\n");
+ err = -ENODEV;
+ goto out_free;
+ }
+
+ rdc321x_gpio_dev->reg2_ctrl_base = r->start;
+ rdc321x_gpio_dev->reg2_data_base = r->start + 0x4;
+
+ rdc321x_gpio_dev->chip.label = "rdc321x-gpio";
+ rdc321x_gpio_dev->chip.direction_input = rdc_gpio_direction_input;
+ rdc321x_gpio_dev->chip.direction_output = rdc_gpio_config;
+ rdc321x_gpio_dev->chip.get = rdc_gpio_get_value;
+ rdc321x_gpio_dev->chip.set = rdc_gpio_set_value;
+ rdc321x_gpio_dev->chip.base = 0;
+ rdc321x_gpio_dev->chip.ngpio = pdata->max_gpios;
+
+ platform_set_drvdata(pdev, rdc321x_gpio_dev);
+
+ /* This might not be, what others (BIOS, bootloader, etc.)
+ wrote to these registers before, but it's a good guess. Still
+ better than just using 0xffffffff. */
+ err = pci_read_config_dword(rdc321x_gpio_dev->sb_pdev,
+ rdc321x_gpio_dev->reg1_data_base,
+ &rdc321x_gpio_dev->data_reg[0]);
+ if (err)
+ goto out_drvdata;
+
+ err = pci_read_config_dword(rdc321x_gpio_dev->sb_pdev,
+ rdc321x_gpio_dev->reg2_data_base,
+ &rdc321x_gpio_dev->data_reg[1]);
+ if (err)
+ goto out_drvdata;
+
+ dev_info(&pdev->dev, "registering %d GPIOs\n",
+ rdc321x_gpio_dev->chip.ngpio);
+ return gpiochip_add(&rdc321x_gpio_dev->chip);
+
+out_drvdata:
+ platform_set_drvdata(pdev, NULL);
+out_free:
+ kfree(rdc321x_gpio_dev);
+ return err;
+}
+
+static int __devexit rdc321x_gpio_remove(struct platform_device *pdev)
+{
+ int ret;
+ struct rdc321x_gpio *rdc321x_gpio_dev = platform_get_drvdata(pdev);
+
+ ret = gpiochip_remove(&rdc321x_gpio_dev->chip);
+ if (ret)
+ dev_err(&pdev->dev, "failed to unregister chip\n");
+
+ kfree(rdc321x_gpio_dev);
+ platform_set_drvdata(pdev, NULL);
+
+ return ret;
+}
+
+static struct platform_driver rdc321x_gpio_driver = {
+ .driver.name = "rdc321x-gpio",
+ .driver.owner = THIS_MODULE,
+ .probe = rdc321x_gpio_probe,
+ .remove = __devexit_p(rdc321x_gpio_remove),
+};
+
+static int __init rdc321x_gpio_init(void)
+{
+ return platform_driver_register(&rdc321x_gpio_driver);
+}
+
+static void __exit rdc321x_gpio_exit(void)
+{
+ platform_driver_unregister(&rdc321x_gpio_driver);
+}
+
+module_init(rdc321x_gpio_init);
+module_exit(rdc321x_gpio_exit);
+
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("RDC321x GPIO driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rdc321x-gpio");
diff --git a/drivers/gpio/tc35892-gpio.c b/drivers/gpio/tc35892-gpio.c
new file mode 100644
index 0000000..1be6288
--- /dev/null
+++ b/drivers/gpio/tc35892-gpio.c
@@ -0,0 +1,381 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> for ST-Ericsson
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/tc35892.h>
+
+/*
+ * These registers are modified under the irq bus lock and cached to avoid
+ * unnecessary writes in bus_sync_unlock.
+ */
+enum { REG_IBE, REG_IEV, REG_IS, REG_IE };
+
+#define CACHE_NR_REGS 4
+#define CACHE_NR_BANKS 3
+
+struct tc35892_gpio {
+ struct gpio_chip chip;
+ struct tc35892 *tc35892;
+ struct device *dev;
+ struct mutex irq_lock;
+
+ int irq_base;
+
+ /* Caches of interrupt control registers for bus_lock */
+ u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS];
+ u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS];
+};
+
+static inline struct tc35892_gpio *to_tc35892_gpio(struct gpio_chip *chip)
+{
+ return container_of(chip, struct tc35892_gpio, chip);
+}
+
+static int tc35892_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct tc35892_gpio *tc35892_gpio = to_tc35892_gpio(chip);
+ struct tc35892 *tc35892 = tc35892_gpio->tc35892;
+ u8 reg = TC35892_GPIODATA0 + (offset / 8) * 2;
+ u8 mask = 1 << (offset % 8);
+ int ret;
+
+ ret = tc35892_reg_read(tc35892, reg);
+ if (ret < 0)
+ return ret;
+
+ return ret & mask;
+}
+
+static void tc35892_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct tc35892_gpio *tc35892_gpio = to_tc35892_gpio(chip);
+ struct tc35892 *tc35892 = tc35892_gpio->tc35892;
+ u8 reg = TC35892_GPIODATA0 + (offset / 8) * 2;
+ unsigned pos = offset % 8;
+ u8 data[] = {!!val << pos, 1 << pos};
+
+ tc35892_block_write(tc35892, reg, ARRAY_SIZE(data), data);
+}
+
+static int tc35892_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int val)
+{
+ struct tc35892_gpio *tc35892_gpio = to_tc35892_gpio(chip);
+ struct tc35892 *tc35892 = tc35892_gpio->tc35892;
+ u8 reg = TC35892_GPIODIR0 + offset / 8;
+ unsigned pos = offset % 8;
+
+ tc35892_gpio_set(chip, offset, val);
+
+ return tc35892_set_bits(tc35892, reg, 1 << pos, 1 << pos);
+}
+
+static int tc35892_gpio_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct tc35892_gpio *tc35892_gpio = to_tc35892_gpio(chip);
+ struct tc35892 *tc35892 = tc35892_gpio->tc35892;
+ u8 reg = TC35892_GPIODIR0 + offset / 8;
+ unsigned pos = offset % 8;
+
+ return tc35892_set_bits(tc35892, reg, 1 << pos, 0);
+}
+
+static int tc35892_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct tc35892_gpio *tc35892_gpio = to_tc35892_gpio(chip);
+
+ return tc35892_gpio->irq_base + offset;
+}
+
+static struct gpio_chip template_chip = {
+ .label = "tc35892",
+ .owner = THIS_MODULE,
+ .direction_input = tc35892_gpio_direction_input,
+ .get = tc35892_gpio_get,
+ .direction_output = tc35892_gpio_direction_output,
+ .set = tc35892_gpio_set,
+ .to_irq = tc35892_gpio_to_irq,
+ .can_sleep = 1,
+};
+
+static int tc35892_gpio_irq_set_type(unsigned int irq, unsigned int type)
+{
+ struct tc35892_gpio *tc35892_gpio = get_irq_chip_data(irq);
+ int offset = irq - tc35892_gpio->irq_base;
+ int regoffset = offset / 8;
+ int mask = 1 << (offset % 8);
+
+ if (type == IRQ_TYPE_EDGE_BOTH) {
+ tc35892_gpio->regs[REG_IBE][regoffset] |= mask;
+ return 0;
+ }
+
+ tc35892_gpio->regs[REG_IBE][regoffset] &= ~mask;
+
+ if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_LEVEL_HIGH)
+ tc35892_gpio->regs[REG_IS][regoffset] |= mask;
+ else
+ tc35892_gpio->regs[REG_IS][regoffset] &= ~mask;
+
+ if (type == IRQ_TYPE_EDGE_RISING || type == IRQ_TYPE_LEVEL_HIGH)
+ tc35892_gpio->regs[REG_IEV][regoffset] |= mask;
+ else
+ tc35892_gpio->regs[REG_IEV][regoffset] &= ~mask;
+
+ return 0;
+}
+
+static void tc35892_gpio_irq_lock(unsigned int irq)
+{
+ struct tc35892_gpio *tc35892_gpio = get_irq_chip_data(irq);
+
+ mutex_lock(&tc35892_gpio->irq_lock);
+}
+
+static void tc35892_gpio_irq_sync_unlock(unsigned int irq)
+{
+ struct tc35892_gpio *tc35892_gpio = get_irq_chip_data(irq);
+ struct tc35892 *tc35892 = tc35892_gpio->tc35892;
+ static const u8 regmap[] = {
+ [REG_IBE] = TC35892_GPIOIBE0,
+ [REG_IEV] = TC35892_GPIOIEV0,
+ [REG_IS] = TC35892_GPIOIS0,
+ [REG_IE] = TC35892_GPIOIE0,
+ };
+ int i, j;
+
+ for (i = 0; i < CACHE_NR_REGS; i++) {
+ for (j = 0; j < CACHE_NR_BANKS; j++) {
+ u8 old = tc35892_gpio->oldregs[i][j];
+ u8 new = tc35892_gpio->regs[i][j];
+
+ if (new == old)
+ continue;
+
+ tc35892_gpio->oldregs[i][j] = new;
+ tc35892_reg_write(tc35892, regmap[i] + j * 8, new);
+ }
+ }
+
+ mutex_unlock(&tc35892_gpio->irq_lock);
+}
+
+static void tc35892_gpio_irq_mask(unsigned int irq)
+{
+ struct tc35892_gpio *tc35892_gpio = get_irq_chip_data(irq);
+ int offset = irq - tc35892_gpio->irq_base;
+ int regoffset = offset / 8;
+ int mask = 1 << (offset % 8);
+
+ tc35892_gpio->regs[REG_IE][regoffset] &= ~mask;
+}
+
+static void tc35892_gpio_irq_unmask(unsigned int irq)
+{
+ struct tc35892_gpio *tc35892_gpio = get_irq_chip_data(irq);
+ int offset = irq - tc35892_gpio->irq_base;
+ int regoffset = offset / 8;
+ int mask = 1 << (offset % 8);
+
+ tc35892_gpio->regs[REG_IE][regoffset] |= mask;
+}
+
+static struct irq_chip tc35892_gpio_irq_chip = {
+ .name = "tc35892-gpio",
+ .bus_lock = tc35892_gpio_irq_lock,
+ .bus_sync_unlock = tc35892_gpio_irq_sync_unlock,
+ .mask = tc35892_gpio_irq_mask,
+ .unmask = tc35892_gpio_irq_unmask,
+ .set_type = tc35892_gpio_irq_set_type,
+};
+
+static irqreturn_t tc35892_gpio_irq(int irq, void *dev)
+{
+ struct tc35892_gpio *tc35892_gpio = dev;
+ struct tc35892 *tc35892 = tc35892_gpio->tc35892;
+ u8 status[CACHE_NR_BANKS];
+ int ret;
+ int i;
+
+ ret = tc35892_block_read(tc35892, TC35892_GPIOMIS0,
+ ARRAY_SIZE(status), status);
+ if (ret < 0)
+ return IRQ_NONE;
+
+ for (i = 0; i < ARRAY_SIZE(status); i++) {
+ unsigned int stat = status[i];
+ if (!stat)
+ continue;
+
+ while (stat) {
+ int bit = __ffs(stat);
+ int line = i * 8 + bit;
+
+ handle_nested_irq(tc35892_gpio->irq_base + line);
+ stat &= ~(1 << bit);
+ }
+
+ tc35892_reg_write(tc35892, TC35892_GPIOIC0 + i, status[i]);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int tc35892_gpio_irq_init(struct tc35892_gpio *tc35892_gpio)
+{
+ int base = tc35892_gpio->irq_base;
+ int irq;
+
+ for (irq = base; irq < base + tc35892_gpio->chip.ngpio; irq++) {
+ set_irq_chip_data(irq, tc35892_gpio);
+ set_irq_chip_and_handler(irq, &tc35892_gpio_irq_chip,
+ handle_simple_irq);
+ set_irq_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ set_irq_noprobe(irq);
+#endif
+ }
+
+ return 0;
+}
+
+static void tc35892_gpio_irq_remove(struct tc35892_gpio *tc35892_gpio)
+{
+ int base = tc35892_gpio->irq_base;
+ int irq;
+
+ for (irq = base; irq < base + tc35892_gpio->chip.ngpio; irq++) {
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, 0);
+#endif
+ set_irq_chip_and_handler(irq, NULL, NULL);
+ set_irq_chip_data(irq, NULL);
+ }
+}
+
+static int __devinit tc35892_gpio_probe(struct platform_device *pdev)
+{
+ struct tc35892 *tc35892 = dev_get_drvdata(pdev->dev.parent);
+ struct tc35892_gpio_platform_data *pdata;
+ struct tc35892_gpio *tc35892_gpio;
+ int ret;
+ int irq;
+
+ pdata = tc35892->pdata->gpio;
+ if (!pdata)
+ return -ENODEV;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ tc35892_gpio = kzalloc(sizeof(struct tc35892_gpio), GFP_KERNEL);
+ if (!tc35892_gpio)
+ return -ENOMEM;
+
+ mutex_init(&tc35892_gpio->irq_lock);
+
+ tc35892_gpio->dev = &pdev->dev;
+ tc35892_gpio->tc35892 = tc35892;
+
+ tc35892_gpio->chip = template_chip;
+ tc35892_gpio->chip.ngpio = tc35892->num_gpio;
+ tc35892_gpio->chip.dev = &pdev->dev;
+ tc35892_gpio->chip.base = pdata->gpio_base;
+
+ tc35892_gpio->irq_base = tc35892->irq_base + TC35892_INT_GPIO(0);
+
+ /* Bring the GPIO module out of reset */
+ ret = tc35892_set_bits(tc35892, TC35892_RSTCTRL,
+ TC35892_RSTCTRL_GPIRST, 0);
+ if (ret < 0)
+ goto out_free;
+
+ ret = tc35892_gpio_irq_init(tc35892_gpio);
+ if (ret)
+ goto out_free;
+
+ ret = request_threaded_irq(irq, NULL, tc35892_gpio_irq, IRQF_ONESHOT,
+ "tc35892-gpio", tc35892_gpio);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
+ goto out_removeirq;
+ }
+
+ ret = gpiochip_add(&tc35892_gpio->chip);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
+ goto out_freeirq;
+ }
+
+ platform_set_drvdata(pdev, tc35892_gpio);
+
+ return 0;
+
+out_freeirq:
+ free_irq(irq, tc35892_gpio);
+out_removeirq:
+ tc35892_gpio_irq_remove(tc35892_gpio);
+out_free:
+ kfree(tc35892_gpio);
+ return ret;
+}
+
+static int __devexit tc35892_gpio_remove(struct platform_device *pdev)
+{
+ struct tc35892_gpio *tc35892_gpio = platform_get_drvdata(pdev);
+ int irq = platform_get_irq(pdev, 0);
+ int ret;
+
+ ret = gpiochip_remove(&tc35892_gpio->chip);
+ if (ret < 0) {
+ dev_err(tc35892_gpio->dev,
+ "unable to remove gpiochip: %d\n", ret);
+ return ret;
+ }
+
+ free_irq(irq, tc35892_gpio);
+ tc35892_gpio_irq_remove(tc35892_gpio);
+
+ platform_set_drvdata(pdev, NULL);
+ kfree(tc35892_gpio);
+
+ return 0;
+}
+
+static struct platform_driver tc35892_gpio_driver = {
+ .driver.name = "tc35892-gpio",
+ .driver.owner = THIS_MODULE,
+ .probe = tc35892_gpio_probe,
+ .remove = __devexit_p(tc35892_gpio_remove),
+};
+
+static int __init tc35892_gpio_init(void)
+{
+ return platform_driver_register(&tc35892_gpio_driver);
+}
+subsys_initcall(tc35892_gpio_init);
+
+static void __exit tc35892_gpio_exit(void)
+{
+ platform_driver_unregister(&tc35892_gpio_driver);
+}
+module_exit(tc35892_gpio_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TC35892 GPIO driver");
+MODULE_AUTHOR("Hanumath Prasad, Rabin Vincent");
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 994d23b..57cea01 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -1840,8 +1840,10 @@
ret = copy_from_user(clips, clips_ptr,
num_clips * sizeof(*clips));
- if (ret)
+ if (ret) {
+ ret = -EFAULT;
goto out_err2;
+ }
}
if (fb->funcs->dirty) {
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index 7644019..9b2a541 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -860,19 +860,24 @@
}
}
-void drm_kms_helper_poll_init(struct drm_device *dev)
+void drm_kms_helper_poll_disable(struct drm_device *dev)
{
- struct drm_connector *connector;
+ if (!dev->mode_config.poll_enabled)
+ return;
+ delayed_slow_work_cancel(&dev->mode_config.output_poll_slow_work);
+}
+EXPORT_SYMBOL(drm_kms_helper_poll_disable);
+
+void drm_kms_helper_poll_enable(struct drm_device *dev)
+{
bool poll = false;
+ struct drm_connector *connector;
int ret;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
if (connector->polled)
poll = true;
}
- slow_work_register_user(THIS_MODULE);
- delayed_slow_work_init(&dev->mode_config.output_poll_slow_work,
- &output_poll_ops);
if (poll) {
ret = delayed_slow_work_enqueue(&dev->mode_config.output_poll_slow_work, DRM_OUTPUT_POLL_PERIOD);
@@ -880,11 +885,22 @@
DRM_ERROR("delayed enqueue failed %d\n", ret);
}
}
+EXPORT_SYMBOL(drm_kms_helper_poll_enable);
+
+void drm_kms_helper_poll_init(struct drm_device *dev)
+{
+ slow_work_register_user(THIS_MODULE);
+ delayed_slow_work_init(&dev->mode_config.output_poll_slow_work,
+ &output_poll_ops);
+ dev->mode_config.poll_enabled = true;
+
+ drm_kms_helper_poll_enable(dev);
+}
EXPORT_SYMBOL(drm_kms_helper_poll_init);
void drm_kms_helper_poll_fini(struct drm_device *dev)
{
- delayed_slow_work_cancel(&dev->mode_config.output_poll_slow_work);
+ drm_kms_helper_poll_disable(dev);
slow_work_unregister_user(THIS_MODULE);
}
EXPORT_SYMBOL(drm_kms_helper_poll_fini);
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index f569ae8..c198186 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -147,7 +147,10 @@
csum += raw_edid[i];
if (csum) {
DRM_ERROR("EDID checksum is invalid, remainder is %d\n", csum);
- goto bad;
+
+ /* allow CEA to slide through, switches mangle this */
+ if (raw_edid[0] != 0x02)
+ goto bad;
}
/* per-block-type checks */
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index b3779d2..7196620 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -146,7 +146,7 @@
cvt = 1;
break;
case 'R':
- if (!cvt)
+ if (cvt)
rb = 1;
break;
case 'm':
@@ -264,7 +264,7 @@
int drm_fb_helper_panic(struct notifier_block *n, unsigned long ununsed,
void *panic_str)
{
- DRM_ERROR("panic occurred, switching back to text console\n");
+ printk(KERN_ERR "panic occurred, switching back to text console\n");
return drm_fb_helper_force_kernel_mode();
return 0;
}
@@ -315,8 +315,9 @@
struct drm_device *dev = fb_helper->dev;
struct drm_crtc *crtc;
struct drm_crtc_helper_funcs *crtc_funcs;
+ struct drm_connector *connector;
struct drm_encoder *encoder;
- int i;
+ int i, j;
/*
* For each CRTC in this fb, turn the crtc on then,
@@ -332,7 +333,14 @@
crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
-
+ /* Walk the connectors & encoders on this fb turning them on */
+ for (j = 0; j < fb_helper->connector_count; j++) {
+ connector = fb_helper->connector_info[j]->connector;
+ connector->dpms = DRM_MODE_DPMS_ON;
+ drm_connector_property_set_value(connector,
+ dev->mode_config.dpms_property,
+ DRM_MODE_DPMS_ON);
+ }
/* Found a CRTC on this fb, now find encoders */
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if (encoder->crtc == crtc) {
@@ -352,8 +360,9 @@
struct drm_device *dev = fb_helper->dev;
struct drm_crtc *crtc;
struct drm_crtc_helper_funcs *crtc_funcs;
+ struct drm_connector *connector;
struct drm_encoder *encoder;
- int i;
+ int i, j;
/*
* For each CRTC in this fb, find all associated encoders
@@ -367,6 +376,14 @@
if (!crtc->enabled)
continue;
+ /* Walk the connectors on this fb and mark them off */
+ for (j = 0; j < fb_helper->connector_count; j++) {
+ connector = fb_helper->connector_info[j]->connector;
+ connector->dpms = dpms_mode;
+ drm_connector_property_set_value(connector,
+ dev->mode_config.dpms_property,
+ dpms_mode);
+ }
/* Found a CRTC on this fb, now find encoders */
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if (encoder->crtc == crtc) {
@@ -1024,11 +1041,18 @@
}
create_mode:
- mode = drm_cvt_mode(fb_helper_conn->connector->dev, cmdline_mode->xres,
- cmdline_mode->yres,
- cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60,
- cmdline_mode->rb, cmdline_mode->interlace,
- cmdline_mode->margins);
+ if (cmdline_mode->cvt)
+ mode = drm_cvt_mode(fb_helper_conn->connector->dev,
+ cmdline_mode->xres, cmdline_mode->yres,
+ cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60,
+ cmdline_mode->rb, cmdline_mode->interlace,
+ cmdline_mode->margins);
+ else
+ mode = drm_gtf_mode(fb_helper_conn->connector->dev,
+ cmdline_mode->xres, cmdline_mode->yres,
+ cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60,
+ cmdline_mode->interlace,
+ cmdline_mode->margins);
drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
list_add(&mode->head, &fb_helper_conn->connector->modes);
return mode;
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 9563901..da78f2c 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -22,6 +22,7 @@
intel_fb.o \
intel_tv.o \
intel_dvo.o \
+ intel_ringbuffer.o \
intel_overlay.o \
dvo_ch7xxx.o \
dvo_ch7017.o \
diff --git a/drivers/gpu/drm/i915/dvo_tfp410.c b/drivers/gpu/drm/i915/dvo_tfp410.c
index 66c697b..56f6642 100644
--- a/drivers/gpu/drm/i915/dvo_tfp410.c
+++ b/drivers/gpu/drm/i915/dvo_tfp410.c
@@ -208,7 +208,7 @@
uint8_t ctl2;
if (tfp410_readb(dvo, TFP410_CTL_2, &ctl2)) {
- if (ctl2 & TFP410_CTL_2_HTPLG)
+ if (ctl2 & TFP410_CTL_2_RSEN)
ret = connector_status_connected;
else
ret = connector_status_disconnected;
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 322070c..aee83fa 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -77,7 +77,7 @@
case ACTIVE_LIST:
seq_printf(m, "Active:\n");
lock = &dev_priv->mm.active_list_lock;
- head = &dev_priv->mm.active_list;
+ head = &dev_priv->render_ring.active_list;
break;
case INACTIVE_LIST:
seq_printf(m, "Inactive:\n");
@@ -129,7 +129,8 @@
struct drm_i915_gem_request *gem_request;
seq_printf(m, "Request:\n");
- list_for_each_entry(gem_request, &dev_priv->mm.request_list, list) {
+ list_for_each_entry(gem_request, &dev_priv->render_ring.request_list,
+ list) {
seq_printf(m, " %d @ %d\n",
gem_request->seqno,
(int) (jiffies - gem_request->emitted_jiffies));
@@ -143,9 +144,9 @@
struct drm_device *dev = node->minor->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
- if (dev_priv->hw_status_page != NULL) {
+ if (dev_priv->render_ring.status_page.page_addr != NULL) {
seq_printf(m, "Current sequence: %d\n",
- i915_get_gem_seqno(dev));
+ i915_get_gem_seqno(dev, &dev_priv->render_ring));
} else {
seq_printf(m, "Current sequence: hws uninitialized\n");
}
@@ -195,9 +196,9 @@
}
seq_printf(m, "Interrupts received: %d\n",
atomic_read(&dev_priv->irq_received));
- if (dev_priv->hw_status_page != NULL) {
+ if (dev_priv->render_ring.status_page.page_addr != NULL) {
seq_printf(m, "Current sequence: %d\n",
- i915_get_gem_seqno(dev));
+ i915_get_gem_seqno(dev, &dev_priv->render_ring));
} else {
seq_printf(m, "Current sequence: hws uninitialized\n");
}
@@ -251,7 +252,7 @@
int i;
volatile u32 *hws;
- hws = (volatile u32 *)dev_priv->hw_status_page;
+ hws = (volatile u32 *)dev_priv->render_ring.status_page.page_addr;
if (hws == NULL)
return 0;
@@ -287,7 +288,8 @@
spin_lock(&dev_priv->mm.active_list_lock);
- list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
+ list_for_each_entry(obj_priv, &dev_priv->render_ring.active_list,
+ list) {
obj = &obj_priv->base;
if (obj->read_domains & I915_GEM_DOMAIN_COMMAND) {
ret = i915_gem_object_get_pages(obj, 0);
@@ -317,14 +319,14 @@
u8 *virt;
uint32_t *ptr, off;
- if (!dev_priv->ring.ring_obj) {
+ if (!dev_priv->render_ring.gem_object) {
seq_printf(m, "No ringbuffer setup\n");
return 0;
}
- virt = dev_priv->ring.virtual_start;
+ virt = dev_priv->render_ring.virtual_start;
- for (off = 0; off < dev_priv->ring.Size; off += 4) {
+ for (off = 0; off < dev_priv->render_ring.size; off += 4) {
ptr = (uint32_t *)(virt + off);
seq_printf(m, "%08x : %08x\n", off, *ptr);
}
@@ -344,7 +346,7 @@
seq_printf(m, "RingHead : %08x\n", head);
seq_printf(m, "RingTail : %08x\n", tail);
- seq_printf(m, "RingSize : %08lx\n", dev_priv->ring.Size);
+ seq_printf(m, "RingSize : %08lx\n", dev_priv->render_ring.size);
seq_printf(m, "Acthd : %08x\n", I915_READ(IS_I965G(dev) ? ACTHD_I965 : ACTHD));
return 0;
@@ -489,11 +491,14 @@
struct drm_device *dev = node->minor->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
u16 rgvswctl = I915_READ16(MEMSWCTL);
+ u16 rgvstat = I915_READ16(MEMSTAT_ILK);
- seq_printf(m, "Last command: 0x%01x\n", (rgvswctl >> 13) & 0x3);
- seq_printf(m, "Command status: %d\n", (rgvswctl >> 12) & 1);
- seq_printf(m, "P%d DELAY 0x%02x\n", (rgvswctl >> 8) & 0xf,
- rgvswctl & 0x3f);
+ seq_printf(m, "Requested P-state: %d\n", (rgvswctl >> 8) & 0xf);
+ seq_printf(m, "Requested VID: %d\n", rgvswctl & 0x3f);
+ seq_printf(m, "Current VID: %d\n", (rgvstat & MEMSTAT_VID_MASK) >>
+ MEMSTAT_VID_SHIFT);
+ seq_printf(m, "Current P-state: %d\n",
+ (rgvstat & MEMSTAT_PSTATE_MASK) >> MEMSTAT_PSTATE_SHIFT);
return 0;
}
@@ -508,7 +513,8 @@
for (i = 0; i < 16; i++) {
delayfreq = I915_READ(PXVFREQ_BASE + i * 4);
- seq_printf(m, "P%02dVIDFREQ: 0x%08x\n", i, delayfreq);
+ seq_printf(m, "P%02dVIDFREQ: 0x%08x (VID: %d)\n", i, delayfreq,
+ (delayfreq & PXVFREQ_PX_MASK) >> PXVFREQ_PX_SHIFT);
}
return 0;
@@ -541,6 +547,8 @@
struct drm_device *dev = node->minor->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
u32 rgvmodectl = I915_READ(MEMMODECTL);
+ u32 rstdbyctl = I915_READ(MCHBAR_RENDER_STANDBY);
+ u16 crstandvid = I915_READ16(CRSTANDVID);
seq_printf(m, "HD boost: %s\n", (rgvmodectl & MEMMODE_BOOST_EN) ?
"yes" : "no");
@@ -555,9 +563,13 @@
rgvmodectl & MEMMODE_RCLK_GATE ? "yes" : "no");
seq_printf(m, "Starting frequency: P%d\n",
(rgvmodectl & MEMMODE_FSTART_MASK) >> MEMMODE_FSTART_SHIFT);
- seq_printf(m, "Max frequency: P%d\n",
+ seq_printf(m, "Max P-state: P%d\n",
(rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT);
- seq_printf(m, "Min frequency: P%d\n", (rgvmodectl & MEMMODE_FMIN_MASK));
+ seq_printf(m, "Min P-state: P%d\n", (rgvmodectl & MEMMODE_FMIN_MASK));
+ seq_printf(m, "RS1 VID: %d\n", (crstandvid & 0x3f));
+ seq_printf(m, "RS2 VID: %d\n", ((crstandvid >> 8) & 0x3f));
+ seq_printf(m, "Render standby enabled: %s\n",
+ (rstdbyctl & RCX_SW_EXIT) ? "no" : "yes");
return 0;
}
@@ -608,7 +620,7 @@
drm_i915_private_t *dev_priv = dev->dev_private;
bool sr_enabled = false;
- if (IS_I965G(dev) || IS_I945G(dev) || IS_I945GM(dev))
+ if (IS_I965GM(dev) || IS_I945G(dev) || IS_I945GM(dev))
sr_enabled = I915_READ(FW_BLC_SELF) & FW_BLC_SELF_EN;
else if (IS_I915GM(dev))
sr_enabled = I915_READ(INSTPM) & INSTPM_SELF_EN;
@@ -621,6 +633,36 @@
return 0;
}
+static int i915_emon_status(struct seq_file *m, void *unused)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ unsigned long temp, chipset, gfx;
+
+ temp = i915_mch_val(dev_priv);
+ chipset = i915_chipset_val(dev_priv);
+ gfx = i915_gfx_val(dev_priv);
+
+ seq_printf(m, "GMCH temp: %ld\n", temp);
+ seq_printf(m, "Chipset power: %ld\n", chipset);
+ seq_printf(m, "GFX power: %ld\n", gfx);
+ seq_printf(m, "Total power: %ld\n", chipset + gfx);
+
+ return 0;
+}
+
+static int i915_gfxec(struct seq_file *m, void *unused)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+
+ seq_printf(m, "GFXEC: %ld\n", (unsigned long)I915_READ(0x112f4));
+
+ return 0;
+}
+
static int
i915_wedged_open(struct inode *inode,
struct file *filp)
@@ -743,6 +785,8 @@
{"i915_delayfreq_table", i915_delayfreq_table, 0},
{"i915_inttoext_table", i915_inttoext_table, 0},
{"i915_drpc_info", i915_drpc_info, 0},
+ {"i915_emon_status", i915_emon_status, 0},
+ {"i915_gfxec", i915_gfxec, 0},
{"i915_fbc_status", i915_fbc_status, 0},
{"i915_sr_status", i915_sr_status, 0},
};
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 2a6b5de..f00c5ae 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -40,84 +40,6 @@
#include <linux/vga_switcheroo.h>
#include <linux/slab.h>
-/* Really want an OS-independent resettable timer. Would like to have
- * this loop run for (eg) 3 sec, but have the timer reset every time
- * the head pointer changes, so that EBUSY only happens if the ring
- * actually stalls for (eg) 3 seconds.
- */
-int i915_wait_ring(struct drm_device * dev, int n, const char *caller)
-{
- drm_i915_private_t *dev_priv = dev->dev_private;
- drm_i915_ring_buffer_t *ring = &(dev_priv->ring);
- u32 acthd_reg = IS_I965G(dev) ? ACTHD_I965 : ACTHD;
- u32 last_acthd = I915_READ(acthd_reg);
- u32 acthd;
- u32 last_head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
- int i;
-
- trace_i915_ring_wait_begin (dev);
-
- for (i = 0; i < 100000; i++) {
- ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
- acthd = I915_READ(acthd_reg);
- ring->space = ring->head - (ring->tail + 8);
- if (ring->space < 0)
- ring->space += ring->Size;
- if (ring->space >= n) {
- trace_i915_ring_wait_end (dev);
- return 0;
- }
-
- if (dev->primary->master) {
- struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
- if (master_priv->sarea_priv)
- master_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT;
- }
-
-
- if (ring->head != last_head)
- i = 0;
- if (acthd != last_acthd)
- i = 0;
-
- last_head = ring->head;
- last_acthd = acthd;
- msleep_interruptible(10);
-
- }
-
- trace_i915_ring_wait_end (dev);
- return -EBUSY;
-}
-
-/* As a ringbuffer is only allowed to wrap between instructions, fill
- * the tail with NOOPs.
- */
-int i915_wrap_ring(struct drm_device *dev)
-{
- drm_i915_private_t *dev_priv = dev->dev_private;
- volatile unsigned int *virt;
- int rem;
-
- rem = dev_priv->ring.Size - dev_priv->ring.tail;
- if (dev_priv->ring.space < rem) {
- int ret = i915_wait_ring(dev, rem, __func__);
- if (ret)
- return ret;
- }
- dev_priv->ring.space -= rem;
-
- virt = (unsigned int *)
- (dev_priv->ring.virtual_start + dev_priv->ring.tail);
- rem /= 4;
- while (rem--)
- *virt++ = MI_NOOP;
-
- dev_priv->ring.tail = 0;
-
- return 0;
-}
-
/**
* Sets up the hardware status page for devices that need a physical address
* in the register.
@@ -133,10 +55,11 @@
DRM_ERROR("Can not allocate hardware status page\n");
return -ENOMEM;
}
- dev_priv->hw_status_page = dev_priv->status_page_dmah->vaddr;
+ dev_priv->render_ring.status_page.page_addr
+ = dev_priv->status_page_dmah->vaddr;
dev_priv->dma_status_page = dev_priv->status_page_dmah->busaddr;
- memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
+ memset(dev_priv->render_ring.status_page.page_addr, 0, PAGE_SIZE);
if (IS_I965G(dev))
dev_priv->dma_status_page |= (dev_priv->dma_status_page >> 28) &
@@ -159,8 +82,8 @@
dev_priv->status_page_dmah = NULL;
}
- if (dev_priv->status_gfx_addr) {
- dev_priv->status_gfx_addr = 0;
+ if (dev_priv->render_ring.status_page.gfx_addr) {
+ dev_priv->render_ring.status_page.gfx_addr = 0;
drm_core_ioremapfree(&dev_priv->hws_map, dev);
}
@@ -172,7 +95,7 @@
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv;
- drm_i915_ring_buffer_t *ring = &(dev_priv->ring);
+ struct intel_ring_buffer *ring = &dev_priv->render_ring;
/*
* We should never lose context on the ring with modesetting
@@ -185,7 +108,7 @@
ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
ring->space = ring->head - (ring->tail + 8);
if (ring->space < 0)
- ring->space += ring->Size;
+ ring->space += ring->size;
if (!dev->primary->master)
return;
@@ -205,12 +128,11 @@
if (dev->irq_enabled)
drm_irq_uninstall(dev);
- if (dev_priv->ring.virtual_start) {
- drm_core_ioremapfree(&dev_priv->ring.map, dev);
- dev_priv->ring.virtual_start = NULL;
- dev_priv->ring.map.handle = NULL;
- dev_priv->ring.map.size = 0;
- }
+ mutex_lock(&dev->struct_mutex);
+ intel_cleanup_ring_buffer(dev, &dev_priv->render_ring);
+ if (HAS_BSD(dev))
+ intel_cleanup_ring_buffer(dev, &dev_priv->bsd_ring);
+ mutex_unlock(&dev->struct_mutex);
/* Clear the HWS virtual address at teardown */
if (I915_NEED_GFX_HWS(dev))
@@ -233,24 +155,24 @@
}
if (init->ring_size != 0) {
- if (dev_priv->ring.ring_obj != NULL) {
+ if (dev_priv->render_ring.gem_object != NULL) {
i915_dma_cleanup(dev);
DRM_ERROR("Client tried to initialize ringbuffer in "
"GEM mode\n");
return -EINVAL;
}
- dev_priv->ring.Size = init->ring_size;
+ dev_priv->render_ring.size = init->ring_size;
- dev_priv->ring.map.offset = init->ring_start;
- dev_priv->ring.map.size = init->ring_size;
- dev_priv->ring.map.type = 0;
- dev_priv->ring.map.flags = 0;
- dev_priv->ring.map.mtrr = 0;
+ dev_priv->render_ring.map.offset = init->ring_start;
+ dev_priv->render_ring.map.size = init->ring_size;
+ dev_priv->render_ring.map.type = 0;
+ dev_priv->render_ring.map.flags = 0;
+ dev_priv->render_ring.map.mtrr = 0;
- drm_core_ioremap_wc(&dev_priv->ring.map, dev);
+ drm_core_ioremap_wc(&dev_priv->render_ring.map, dev);
- if (dev_priv->ring.map.handle == NULL) {
+ if (dev_priv->render_ring.map.handle == NULL) {
i915_dma_cleanup(dev);
DRM_ERROR("can not ioremap virtual address for"
" ring buffer\n");
@@ -258,7 +180,7 @@
}
}
- dev_priv->ring.virtual_start = dev_priv->ring.map.handle;
+ dev_priv->render_ring.virtual_start = dev_priv->render_ring.map.handle;
dev_priv->cpp = init->cpp;
dev_priv->back_offset = init->back_offset;
@@ -278,26 +200,29 @@
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ struct intel_ring_buffer *ring;
DRM_DEBUG_DRIVER("%s\n", __func__);
- if (dev_priv->ring.map.handle == NULL) {
+ ring = &dev_priv->render_ring;
+
+ if (ring->map.handle == NULL) {
DRM_ERROR("can not ioremap virtual address for"
" ring buffer\n");
return -ENOMEM;
}
/* Program Hardware Status Page */
- if (!dev_priv->hw_status_page) {
+ if (!ring->status_page.page_addr) {
DRM_ERROR("Can not find hardware status page\n");
return -EINVAL;
}
DRM_DEBUG_DRIVER("hw status page @ %p\n",
- dev_priv->hw_status_page);
-
- if (dev_priv->status_gfx_addr != 0)
- I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr);
+ ring->status_page.page_addr);
+ if (ring->status_page.gfx_addr != 0)
+ ring->setup_status_page(dev, ring);
else
I915_WRITE(HWS_PGA, dev_priv->dma_status_page);
+
DRM_DEBUG_DRIVER("Enabled hardware status page\n");
return 0;
@@ -407,9 +332,8 @@
{
drm_i915_private_t *dev_priv = dev->dev_private;
int i;
- RING_LOCALS;
- if ((dwords+1) * sizeof(int) >= dev_priv->ring.Size - 8)
+ if ((dwords+1) * sizeof(int) >= dev_priv->render_ring.size - 8)
return -EINVAL;
BEGIN_LP_RING((dwords+1)&~1);
@@ -442,9 +366,7 @@
struct drm_clip_rect *boxes,
int i, int DR1, int DR4)
{
- drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_clip_rect box = boxes[i];
- RING_LOCALS;
if (box.y2 <= box.y1 || box.x2 <= box.x1 || box.y2 <= 0 || box.x2 <= 0) {
DRM_ERROR("Bad box %d,%d..%d,%d\n",
@@ -481,7 +403,6 @@
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
- RING_LOCALS;
dev_priv->counter++;
if (dev_priv->counter > 0x7FFFFFFFUL)
@@ -535,10 +456,8 @@
drm_i915_batchbuffer_t * batch,
struct drm_clip_rect *cliprects)
{
- drm_i915_private_t *dev_priv = dev->dev_private;
int nbox = batch->num_cliprects;
int i = 0, count;
- RING_LOCALS;
if ((batch->start | batch->used) & 0x7) {
DRM_ERROR("alignment");
@@ -587,7 +506,6 @@
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv =
dev->primary->master->driver_priv;
- RING_LOCALS;
if (!master_priv->sarea_priv)
return -EINVAL;
@@ -640,7 +558,8 @@
drm_i915_private_t *dev_priv = dev->dev_private;
i915_kernel_lost_context(dev);
- return i915_wait_ring(dev, dev_priv->ring.Size - 8, __func__);
+ return intel_wait_ring_buffer(dev, &dev_priv->render_ring,
+ dev_priv->render_ring.size - 8);
}
static int i915_flush_ioctl(struct drm_device *dev, void *data,
@@ -827,6 +746,9 @@
/* depends on GEM */
value = dev_priv->has_gem;
break;
+ case I915_PARAM_HAS_BSD:
+ value = HAS_BSD(dev);
+ break;
default:
DRM_DEBUG_DRIVER("Unknown parameter %d\n",
param->param);
@@ -882,6 +804,7 @@
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_hws_addr_t *hws = data;
+ struct intel_ring_buffer *ring = &dev_priv->render_ring;
if (!I915_NEED_GFX_HWS(dev))
return -EINVAL;
@@ -898,7 +821,7 @@
DRM_DEBUG_DRIVER("set status page addr 0x%08x\n", (u32)hws->addr);
- dev_priv->status_gfx_addr = hws->addr & (0x1ffff<<12);
+ ring->status_page.gfx_addr = hws->addr & (0x1ffff<<12);
dev_priv->hws_map.offset = dev->agp->base + hws->addr;
dev_priv->hws_map.size = 4*1024;
@@ -909,19 +832,19 @@
drm_core_ioremap_wc(&dev_priv->hws_map, dev);
if (dev_priv->hws_map.handle == NULL) {
i915_dma_cleanup(dev);
- dev_priv->status_gfx_addr = 0;
+ ring->status_page.gfx_addr = 0;
DRM_ERROR("can not ioremap virtual address for"
" G33 hw status page\n");
return -ENOMEM;
}
- dev_priv->hw_status_page = dev_priv->hws_map.handle;
+ ring->status_page.page_addr = dev_priv->hws_map.handle;
+ memset(ring->status_page.page_addr, 0, PAGE_SIZE);
+ I915_WRITE(HWS_PGA, ring->status_page.gfx_addr);
- memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
- I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr);
DRM_DEBUG_DRIVER("load hws HWS_PGA with gfx mem 0x%x\n",
- dev_priv->status_gfx_addr);
+ ring->status_page.gfx_addr);
DRM_DEBUG_DRIVER("load hws at %p\n",
- dev_priv->hw_status_page);
+ ring->status_page.page_addr);
return 0;
}
@@ -1308,7 +1231,7 @@
static void i915_setup_compression(struct drm_device *dev, int size)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_mm_node *compressed_fb, *compressed_llb;
+ struct drm_mm_node *compressed_fb, *uninitialized_var(compressed_llb);
unsigned long cfb_base;
unsigned long ll_base = 0;
@@ -1399,12 +1322,14 @@
struct drm_device *dev = pci_get_drvdata(pdev);
pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
if (state == VGA_SWITCHEROO_ON) {
- printk(KERN_INFO "i915: switched off\n");
+ printk(KERN_INFO "i915: switched on\n");
/* i915 resume handler doesn't set to D0 */
pci_set_power_state(dev->pdev, PCI_D0);
i915_resume(dev);
+ drm_kms_helper_poll_enable(dev);
} else {
printk(KERN_ERR "i915: switched off\n");
+ drm_kms_helper_poll_disable(dev);
i915_suspend(dev, pmm);
}
}
@@ -1479,19 +1404,23 @@
/* if we have > 1 VGA cards, then disable the radeon VGA resources */
ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode);
if (ret)
- goto destroy_ringbuffer;
+ goto cleanup_ringbuffer;
ret = vga_switcheroo_register_client(dev->pdev,
i915_switcheroo_set_state,
i915_switcheroo_can_switch);
if (ret)
- goto destroy_ringbuffer;
+ goto cleanup_vga_client;
+
+ /* IIR "flip pending" bit means done if this bit is set */
+ if (IS_GEN3(dev) && (I915_READ(ECOSKPD) & ECO_FLIP_DONE))
+ dev_priv->flip_pending_is_done = true;
intel_modeset_init(dev);
ret = drm_irq_install(dev);
if (ret)
- goto destroy_ringbuffer;
+ goto cleanup_vga_switcheroo;
/* Always safe in the mode setting case. */
/* FIXME: do pre/post-mode set stuff in core KMS code */
@@ -1503,11 +1432,20 @@
I915_WRITE(INSTPM, (1 << 5) | (1 << 21));
- intel_fbdev_init(dev);
+ ret = intel_fbdev_init(dev);
+ if (ret)
+ goto cleanup_irq;
+
drm_kms_helper_poll_init(dev);
return 0;
-destroy_ringbuffer:
+cleanup_irq:
+ drm_irq_uninstall(dev);
+cleanup_vga_switcheroo:
+ vga_switcheroo_unregister_client(dev->pdev);
+cleanup_vga_client:
+ vga_client_register(dev->pdev, NULL, NULL, NULL);
+cleanup_ringbuffer:
mutex_lock(&dev->struct_mutex);
i915_gem_cleanup_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
@@ -1539,14 +1477,11 @@
master->driver_priv = NULL;
}
-static void i915_get_mem_freq(struct drm_device *dev)
+static void i915_pineview_get_mem_freq(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
u32 tmp;
- if (!IS_PINEVIEW(dev))
- return;
-
tmp = I915_READ(CLKCFG);
switch (tmp & CLKCFG_FSB_MASK) {
@@ -1575,8 +1510,525 @@
dev_priv->mem_freq = 800;
break;
}
+
+ /* detect pineview DDR3 setting */
+ tmp = I915_READ(CSHRDDR3CTL);
+ dev_priv->is_ddr3 = (tmp & CSHRDDR3CTL_DDR3) ? 1 : 0;
}
+static void i915_ironlake_get_mem_freq(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ u16 ddrpll, csipll;
+
+ ddrpll = I915_READ16(DDRMPLL1);
+ csipll = I915_READ16(CSIPLL0);
+
+ switch (ddrpll & 0xff) {
+ case 0xc:
+ dev_priv->mem_freq = 800;
+ break;
+ case 0x10:
+ dev_priv->mem_freq = 1066;
+ break;
+ case 0x14:
+ dev_priv->mem_freq = 1333;
+ break;
+ case 0x18:
+ dev_priv->mem_freq = 1600;
+ break;
+ default:
+ DRM_DEBUG_DRIVER("unknown memory frequency 0x%02x\n",
+ ddrpll & 0xff);
+ dev_priv->mem_freq = 0;
+ break;
+ }
+
+ dev_priv->r_t = dev_priv->mem_freq;
+
+ switch (csipll & 0x3ff) {
+ case 0x00c:
+ dev_priv->fsb_freq = 3200;
+ break;
+ case 0x00e:
+ dev_priv->fsb_freq = 3733;
+ break;
+ case 0x010:
+ dev_priv->fsb_freq = 4266;
+ break;
+ case 0x012:
+ dev_priv->fsb_freq = 4800;
+ break;
+ case 0x014:
+ dev_priv->fsb_freq = 5333;
+ break;
+ case 0x016:
+ dev_priv->fsb_freq = 5866;
+ break;
+ case 0x018:
+ dev_priv->fsb_freq = 6400;
+ break;
+ default:
+ DRM_DEBUG_DRIVER("unknown fsb frequency 0x%04x\n",
+ csipll & 0x3ff);
+ dev_priv->fsb_freq = 0;
+ break;
+ }
+
+ if (dev_priv->fsb_freq == 3200) {
+ dev_priv->c_m = 0;
+ } else if (dev_priv->fsb_freq > 3200 && dev_priv->fsb_freq <= 4800) {
+ dev_priv->c_m = 1;
+ } else {
+ dev_priv->c_m = 2;
+ }
+}
+
+struct v_table {
+ u8 vid;
+ unsigned long vd; /* in .1 mil */
+ unsigned long vm; /* in .1 mil */
+ u8 pvid;
+};
+
+static struct v_table v_table[] = {
+ { 0, 16125, 15000, 0x7f, },
+ { 1, 16000, 14875, 0x7e, },
+ { 2, 15875, 14750, 0x7d, },
+ { 3, 15750, 14625, 0x7c, },
+ { 4, 15625, 14500, 0x7b, },
+ { 5, 15500, 14375, 0x7a, },
+ { 6, 15375, 14250, 0x79, },
+ { 7, 15250, 14125, 0x78, },
+ { 8, 15125, 14000, 0x77, },
+ { 9, 15000, 13875, 0x76, },
+ { 10, 14875, 13750, 0x75, },
+ { 11, 14750, 13625, 0x74, },
+ { 12, 14625, 13500, 0x73, },
+ { 13, 14500, 13375, 0x72, },
+ { 14, 14375, 13250, 0x71, },
+ { 15, 14250, 13125, 0x70, },
+ { 16, 14125, 13000, 0x6f, },
+ { 17, 14000, 12875, 0x6e, },
+ { 18, 13875, 12750, 0x6d, },
+ { 19, 13750, 12625, 0x6c, },
+ { 20, 13625, 12500, 0x6b, },
+ { 21, 13500, 12375, 0x6a, },
+ { 22, 13375, 12250, 0x69, },
+ { 23, 13250, 12125, 0x68, },
+ { 24, 13125, 12000, 0x67, },
+ { 25, 13000, 11875, 0x66, },
+ { 26, 12875, 11750, 0x65, },
+ { 27, 12750, 11625, 0x64, },
+ { 28, 12625, 11500, 0x63, },
+ { 29, 12500, 11375, 0x62, },
+ { 30, 12375, 11250, 0x61, },
+ { 31, 12250, 11125, 0x60, },
+ { 32, 12125, 11000, 0x5f, },
+ { 33, 12000, 10875, 0x5e, },
+ { 34, 11875, 10750, 0x5d, },
+ { 35, 11750, 10625, 0x5c, },
+ { 36, 11625, 10500, 0x5b, },
+ { 37, 11500, 10375, 0x5a, },
+ { 38, 11375, 10250, 0x59, },
+ { 39, 11250, 10125, 0x58, },
+ { 40, 11125, 10000, 0x57, },
+ { 41, 11000, 9875, 0x56, },
+ { 42, 10875, 9750, 0x55, },
+ { 43, 10750, 9625, 0x54, },
+ { 44, 10625, 9500, 0x53, },
+ { 45, 10500, 9375, 0x52, },
+ { 46, 10375, 9250, 0x51, },
+ { 47, 10250, 9125, 0x50, },
+ { 48, 10125, 9000, 0x4f, },
+ { 49, 10000, 8875, 0x4e, },
+ { 50, 9875, 8750, 0x4d, },
+ { 51, 9750, 8625, 0x4c, },
+ { 52, 9625, 8500, 0x4b, },
+ { 53, 9500, 8375, 0x4a, },
+ { 54, 9375, 8250, 0x49, },
+ { 55, 9250, 8125, 0x48, },
+ { 56, 9125, 8000, 0x47, },
+ { 57, 9000, 7875, 0x46, },
+ { 58, 8875, 7750, 0x45, },
+ { 59, 8750, 7625, 0x44, },
+ { 60, 8625, 7500, 0x43, },
+ { 61, 8500, 7375, 0x42, },
+ { 62, 8375, 7250, 0x41, },
+ { 63, 8250, 7125, 0x40, },
+ { 64, 8125, 7000, 0x3f, },
+ { 65, 8000, 6875, 0x3e, },
+ { 66, 7875, 6750, 0x3d, },
+ { 67, 7750, 6625, 0x3c, },
+ { 68, 7625, 6500, 0x3b, },
+ { 69, 7500, 6375, 0x3a, },
+ { 70, 7375, 6250, 0x39, },
+ { 71, 7250, 6125, 0x38, },
+ { 72, 7125, 6000, 0x37, },
+ { 73, 7000, 5875, 0x36, },
+ { 74, 6875, 5750, 0x35, },
+ { 75, 6750, 5625, 0x34, },
+ { 76, 6625, 5500, 0x33, },
+ { 77, 6500, 5375, 0x32, },
+ { 78, 6375, 5250, 0x31, },
+ { 79, 6250, 5125, 0x30, },
+ { 80, 6125, 5000, 0x2f, },
+ { 81, 6000, 4875, 0x2e, },
+ { 82, 5875, 4750, 0x2d, },
+ { 83, 5750, 4625, 0x2c, },
+ { 84, 5625, 4500, 0x2b, },
+ { 85, 5500, 4375, 0x2a, },
+ { 86, 5375, 4250, 0x29, },
+ { 87, 5250, 4125, 0x28, },
+ { 88, 5125, 4000, 0x27, },
+ { 89, 5000, 3875, 0x26, },
+ { 90, 4875, 3750, 0x25, },
+ { 91, 4750, 3625, 0x24, },
+ { 92, 4625, 3500, 0x23, },
+ { 93, 4500, 3375, 0x22, },
+ { 94, 4375, 3250, 0x21, },
+ { 95, 4250, 3125, 0x20, },
+ { 96, 4125, 3000, 0x1f, },
+ { 97, 4125, 3000, 0x1e, },
+ { 98, 4125, 3000, 0x1d, },
+ { 99, 4125, 3000, 0x1c, },
+ { 100, 4125, 3000, 0x1b, },
+ { 101, 4125, 3000, 0x1a, },
+ { 102, 4125, 3000, 0x19, },
+ { 103, 4125, 3000, 0x18, },
+ { 104, 4125, 3000, 0x17, },
+ { 105, 4125, 3000, 0x16, },
+ { 106, 4125, 3000, 0x15, },
+ { 107, 4125, 3000, 0x14, },
+ { 108, 4125, 3000, 0x13, },
+ { 109, 4125, 3000, 0x12, },
+ { 110, 4125, 3000, 0x11, },
+ { 111, 4125, 3000, 0x10, },
+ { 112, 4125, 3000, 0x0f, },
+ { 113, 4125, 3000, 0x0e, },
+ { 114, 4125, 3000, 0x0d, },
+ { 115, 4125, 3000, 0x0c, },
+ { 116, 4125, 3000, 0x0b, },
+ { 117, 4125, 3000, 0x0a, },
+ { 118, 4125, 3000, 0x09, },
+ { 119, 4125, 3000, 0x08, },
+ { 120, 1125, 0, 0x07, },
+ { 121, 1000, 0, 0x06, },
+ { 122, 875, 0, 0x05, },
+ { 123, 750, 0, 0x04, },
+ { 124, 625, 0, 0x03, },
+ { 125, 500, 0, 0x02, },
+ { 126, 375, 0, 0x01, },
+ { 127, 0, 0, 0x00, },
+};
+
+struct cparams {
+ int i;
+ int t;
+ int m;
+ int c;
+};
+
+static struct cparams cparams[] = {
+ { 1, 1333, 301, 28664 },
+ { 1, 1066, 294, 24460 },
+ { 1, 800, 294, 25192 },
+ { 0, 1333, 276, 27605 },
+ { 0, 1066, 276, 27605 },
+ { 0, 800, 231, 23784 },
+};
+
+unsigned long i915_chipset_val(struct drm_i915_private *dev_priv)
+{
+ u64 total_count, diff, ret;
+ u32 count1, count2, count3, m = 0, c = 0;
+ unsigned long now = jiffies_to_msecs(jiffies), diff1;
+ int i;
+
+ diff1 = now - dev_priv->last_time1;
+
+ count1 = I915_READ(DMIEC);
+ count2 = I915_READ(DDREC);
+ count3 = I915_READ(CSIEC);
+
+ total_count = count1 + count2 + count3;
+
+ /* FIXME: handle per-counter overflow */
+ if (total_count < dev_priv->last_count1) {
+ diff = ~0UL - dev_priv->last_count1;
+ diff += total_count;
+ } else {
+ diff = total_count - dev_priv->last_count1;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(cparams); i++) {
+ if (cparams[i].i == dev_priv->c_m &&
+ cparams[i].t == dev_priv->r_t) {
+ m = cparams[i].m;
+ c = cparams[i].c;
+ break;
+ }
+ }
+
+ div_u64(diff, diff1);
+ ret = ((m * diff) + c);
+ div_u64(ret, 10);
+
+ dev_priv->last_count1 = total_count;
+ dev_priv->last_time1 = now;
+
+ return ret;
+}
+
+unsigned long i915_mch_val(struct drm_i915_private *dev_priv)
+{
+ unsigned long m, x, b;
+ u32 tsfs;
+
+ tsfs = I915_READ(TSFS);
+
+ m = ((tsfs & TSFS_SLOPE_MASK) >> TSFS_SLOPE_SHIFT);
+ x = I915_READ8(TR1);
+
+ b = tsfs & TSFS_INTR_MASK;
+
+ return ((m * x) / 127) - b;
+}
+
+static unsigned long pvid_to_extvid(struct drm_i915_private *dev_priv, u8 pxvid)
+{
+ unsigned long val = 0;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(v_table); i++) {
+ if (v_table[i].pvid == pxvid) {
+ if (IS_MOBILE(dev_priv->dev))
+ val = v_table[i].vm;
+ else
+ val = v_table[i].vd;
+ }
+ }
+
+ return val;
+}
+
+void i915_update_gfx_val(struct drm_i915_private *dev_priv)
+{
+ struct timespec now, diff1;
+ u64 diff;
+ unsigned long diffms;
+ u32 count;
+
+ getrawmonotonic(&now);
+ diff1 = timespec_sub(now, dev_priv->last_time2);
+
+ /* Don't divide by 0 */
+ diffms = diff1.tv_sec * 1000 + diff1.tv_nsec / 1000000;
+ if (!diffms)
+ return;
+
+ count = I915_READ(GFXEC);
+
+ if (count < dev_priv->last_count2) {
+ diff = ~0UL - dev_priv->last_count2;
+ diff += count;
+ } else {
+ diff = count - dev_priv->last_count2;
+ }
+
+ dev_priv->last_count2 = count;
+ dev_priv->last_time2 = now;
+
+ /* More magic constants... */
+ diff = diff * 1181;
+ div_u64(diff, diffms * 10);
+ dev_priv->gfx_power = diff;
+}
+
+unsigned long i915_gfx_val(struct drm_i915_private *dev_priv)
+{
+ unsigned long t, corr, state1, corr2, state2;
+ u32 pxvid, ext_v;
+
+ pxvid = I915_READ(PXVFREQ_BASE + (dev_priv->cur_delay * 4));
+ pxvid = (pxvid >> 24) & 0x7f;
+ ext_v = pvid_to_extvid(dev_priv, pxvid);
+
+ state1 = ext_v;
+
+ t = i915_mch_val(dev_priv);
+
+ /* Revel in the empirically derived constants */
+
+ /* Correction factor in 1/100000 units */
+ if (t > 80)
+ corr = ((t * 2349) + 135940);
+ else if (t >= 50)
+ corr = ((t * 964) + 29317);
+ else /* < 50 */
+ corr = ((t * 301) + 1004);
+
+ corr = corr * ((150142 * state1) / 10000 - 78642);
+ corr /= 100000;
+ corr2 = (corr * dev_priv->corr);
+
+ state2 = (corr2 * state1) / 10000;
+ state2 /= 100; /* convert to mW */
+
+ i915_update_gfx_val(dev_priv);
+
+ return dev_priv->gfx_power + state2;
+}
+
+/* Global for IPS driver to get at the current i915 device */
+static struct drm_i915_private *i915_mch_dev;
+/*
+ * Lock protecting IPS related data structures
+ * - i915_mch_dev
+ * - dev_priv->max_delay
+ * - dev_priv->min_delay
+ * - dev_priv->fmax
+ * - dev_priv->gpu_busy
+ */
+DEFINE_SPINLOCK(mchdev_lock);
+
+/**
+ * i915_read_mch_val - return value for IPS use
+ *
+ * Calculate and return a value for the IPS driver to use when deciding whether
+ * we have thermal and power headroom to increase CPU or GPU power budget.
+ */
+unsigned long i915_read_mch_val(void)
+{
+ struct drm_i915_private *dev_priv;
+ unsigned long chipset_val, graphics_val, ret = 0;
+
+ spin_lock(&mchdev_lock);
+ if (!i915_mch_dev)
+ goto out_unlock;
+ dev_priv = i915_mch_dev;
+
+ chipset_val = i915_chipset_val(dev_priv);
+ graphics_val = i915_gfx_val(dev_priv);
+
+ ret = chipset_val + graphics_val;
+
+out_unlock:
+ spin_unlock(&mchdev_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(i915_read_mch_val);
+
+/**
+ * i915_gpu_raise - raise GPU frequency limit
+ *
+ * Raise the limit; IPS indicates we have thermal headroom.
+ */
+bool i915_gpu_raise(void)
+{
+ struct drm_i915_private *dev_priv;
+ bool ret = true;
+
+ spin_lock(&mchdev_lock);
+ if (!i915_mch_dev) {
+ ret = false;
+ goto out_unlock;
+ }
+ dev_priv = i915_mch_dev;
+
+ if (dev_priv->max_delay > dev_priv->fmax)
+ dev_priv->max_delay--;
+
+out_unlock:
+ spin_unlock(&mchdev_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(i915_gpu_raise);
+
+/**
+ * i915_gpu_lower - lower GPU frequency limit
+ *
+ * IPS indicates we're close to a thermal limit, so throttle back the GPU
+ * frequency maximum.
+ */
+bool i915_gpu_lower(void)
+{
+ struct drm_i915_private *dev_priv;
+ bool ret = true;
+
+ spin_lock(&mchdev_lock);
+ if (!i915_mch_dev) {
+ ret = false;
+ goto out_unlock;
+ }
+ dev_priv = i915_mch_dev;
+
+ if (dev_priv->max_delay < dev_priv->min_delay)
+ dev_priv->max_delay++;
+
+out_unlock:
+ spin_unlock(&mchdev_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(i915_gpu_lower);
+
+/**
+ * i915_gpu_busy - indicate GPU business to IPS
+ *
+ * Tell the IPS driver whether or not the GPU is busy.
+ */
+bool i915_gpu_busy(void)
+{
+ struct drm_i915_private *dev_priv;
+ bool ret = false;
+
+ spin_lock(&mchdev_lock);
+ if (!i915_mch_dev)
+ goto out_unlock;
+ dev_priv = i915_mch_dev;
+
+ ret = dev_priv->busy;
+
+out_unlock:
+ spin_unlock(&mchdev_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(i915_gpu_busy);
+
+/**
+ * i915_gpu_turbo_disable - disable graphics turbo
+ *
+ * Disable graphics turbo by resetting the max frequency and setting the
+ * current frequency to the default.
+ */
+bool i915_gpu_turbo_disable(void)
+{
+ struct drm_i915_private *dev_priv;
+ bool ret = true;
+
+ spin_lock(&mchdev_lock);
+ if (!i915_mch_dev) {
+ ret = false;
+ goto out_unlock;
+ }
+ dev_priv = i915_mch_dev;
+
+ dev_priv->max_delay = dev_priv->fstart;
+
+ if (!ironlake_set_drps(dev_priv->dev, dev_priv->fstart))
+ ret = false;
+
+out_unlock:
+ spin_unlock(&mchdev_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(i915_gpu_turbo_disable);
+
/**
* i915_driver_load - setup chip and create an initial config
* @dev: DRM device
@@ -1594,7 +2046,6 @@
resource_size_t base, size;
int ret = 0, mmio_bar;
uint32_t agp_size, prealloc_size, prealloc_start;
-
/* i915 has 4 more counters */
dev->counters += 4;
dev->types[6] = _DRM_STAT_IRQ;
@@ -1672,6 +2123,13 @@
dev_priv->has_gem = 0;
}
+ if (dev_priv->has_gem == 0 &&
+ drm_core_check_feature(dev, DRIVER_MODESET)) {
+ DRM_ERROR("kernel modesetting requires GEM, disabling driver.\n");
+ ret = -ENODEV;
+ goto out_iomapfree;
+ }
+
dev->driver->get_vblank_counter = i915_get_vblank_counter;
dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
if (IS_G4X(dev) || IS_IRONLAKE(dev) || IS_GEN6(dev)) {
@@ -1691,7 +2149,10 @@
goto out_workqueue_free;
}
- i915_get_mem_freq(dev);
+ if (IS_PINEVIEW(dev))
+ i915_pineview_get_mem_freq(dev);
+ else if (IS_IRONLAKE(dev))
+ i915_ironlake_get_mem_freq(dev);
/* On the 945G/GM, the chipset reports the MSI capability on the
* integrated graphics even though the support isn't actually there
@@ -1709,7 +2170,6 @@
spin_lock_init(&dev_priv->user_irq_lock);
spin_lock_init(&dev_priv->error_lock);
- dev_priv->user_irq_refcount = 0;
dev_priv->trace_irq_seqno = 0;
ret = drm_vblank_init(dev, I915_NUM_PIPE);
@@ -1738,6 +2198,12 @@
setup_timer(&dev_priv->hangcheck_timer, i915_hangcheck_elapsed,
(unsigned long) dev);
+
+ spin_lock(&mchdev_lock);
+ i915_mch_dev = dev_priv;
+ dev_priv->mchdev_lock = &mchdev_lock;
+ spin_unlock(&mchdev_lock);
+
return 0;
out_workqueue_free:
@@ -1759,6 +2225,10 @@
i915_destroy_error_state(dev);
+ spin_lock(&mchdev_lock);
+ i915_mch_dev = NULL;
+ spin_unlock(&mchdev_lock);
+
destroy_workqueue(dev_priv->wq);
del_timer_sync(&dev_priv->hangcheck_timer);
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 5c51e45..423dc90 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -60,95 +60,95 @@
.subdevice = PCI_ANY_ID, \
.driver_data = (unsigned long) info }
-const static struct intel_device_info intel_i830_info = {
+static const struct intel_device_info intel_i830_info = {
.is_i8xx = 1, .is_mobile = 1, .cursor_needs_physical = 1,
};
-const static struct intel_device_info intel_845g_info = {
+static const struct intel_device_info intel_845g_info = {
.is_i8xx = 1,
};
-const static struct intel_device_info intel_i85x_info = {
+static const struct intel_device_info intel_i85x_info = {
.is_i8xx = 1, .is_i85x = 1, .is_mobile = 1,
.cursor_needs_physical = 1,
};
-const static struct intel_device_info intel_i865g_info = {
+static const struct intel_device_info intel_i865g_info = {
.is_i8xx = 1,
};
-const static struct intel_device_info intel_i915g_info = {
+static const struct intel_device_info intel_i915g_info = {
.is_i915g = 1, .is_i9xx = 1, .cursor_needs_physical = 1,
};
-const static struct intel_device_info intel_i915gm_info = {
+static const struct intel_device_info intel_i915gm_info = {
.is_i9xx = 1, .is_mobile = 1,
.cursor_needs_physical = 1,
};
-const static struct intel_device_info intel_i945g_info = {
+static const struct intel_device_info intel_i945g_info = {
.is_i9xx = 1, .has_hotplug = 1, .cursor_needs_physical = 1,
};
-const static struct intel_device_info intel_i945gm_info = {
+static const struct intel_device_info intel_i945gm_info = {
.is_i945gm = 1, .is_i9xx = 1, .is_mobile = 1,
.has_hotplug = 1, .cursor_needs_physical = 1,
};
-const static struct intel_device_info intel_i965g_info = {
+static const struct intel_device_info intel_i965g_info = {
.is_i965g = 1, .is_i9xx = 1, .has_hotplug = 1,
};
-const static struct intel_device_info intel_i965gm_info = {
+static const struct intel_device_info intel_i965gm_info = {
.is_i965g = 1, .is_mobile = 1, .is_i965gm = 1, .is_i9xx = 1,
.is_mobile = 1, .has_fbc = 1, .has_rc6 = 1,
.has_hotplug = 1,
};
-const static struct intel_device_info intel_g33_info = {
+static const struct intel_device_info intel_g33_info = {
.is_g33 = 1, .is_i9xx = 1, .need_gfx_hws = 1,
.has_hotplug = 1,
};
-const static struct intel_device_info intel_g45_info = {
+static const struct intel_device_info intel_g45_info = {
.is_i965g = 1, .is_g4x = 1, .is_i9xx = 1, .need_gfx_hws = 1,
.has_pipe_cxsr = 1,
.has_hotplug = 1,
};
-const static struct intel_device_info intel_gm45_info = {
+static const struct intel_device_info intel_gm45_info = {
.is_i965g = 1, .is_mobile = 1, .is_g4x = 1, .is_i9xx = 1,
.is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1, .has_rc6 = 1,
.has_pipe_cxsr = 1,
.has_hotplug = 1,
};
-const static struct intel_device_info intel_pineview_info = {
+static const struct intel_device_info intel_pineview_info = {
.is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .is_i9xx = 1,
.need_gfx_hws = 1,
.has_hotplug = 1,
};
-const static struct intel_device_info intel_ironlake_d_info = {
+static const struct intel_device_info intel_ironlake_d_info = {
.is_ironlake = 1, .is_i965g = 1, .is_i9xx = 1, .need_gfx_hws = 1,
.has_pipe_cxsr = 1,
.has_hotplug = 1,
};
-const static struct intel_device_info intel_ironlake_m_info = {
+static const struct intel_device_info intel_ironlake_m_info = {
.is_ironlake = 1, .is_mobile = 1, .is_i965g = 1, .is_i9xx = 1,
.need_gfx_hws = 1, .has_rc6 = 1,
.has_hotplug = 1,
};
-const static struct intel_device_info intel_sandybridge_d_info = {
+static const struct intel_device_info intel_sandybridge_d_info = {
.is_i965g = 1, .is_i9xx = 1, .need_gfx_hws = 1,
.has_hotplug = 1, .is_gen6 = 1,
};
-const static struct intel_device_info intel_sandybridge_m_info = {
+static const struct intel_device_info intel_sandybridge_m_info = {
.is_i965g = 1, .is_mobile = 1, .is_i9xx = 1, .need_gfx_hws = 1,
.has_hotplug = 1, .is_gen6 = 1,
};
-const static struct pci_device_id pciidlist[] = {
+static const struct pci_device_id pciidlist[] = {
INTEL_VGA_DEVICE(0x3577, &intel_i830_info),
INTEL_VGA_DEVICE(0x2562, &intel_845g_info),
INTEL_VGA_DEVICE(0x3582, &intel_i85x_info),
@@ -340,7 +340,7 @@
/*
* Clear request list
*/
- i915_gem_retire_requests(dev);
+ i915_gem_retire_requests(dev, &dev_priv->render_ring);
if (need_display)
i915_save_display(dev);
@@ -370,6 +370,7 @@
}
} else {
DRM_ERROR("Error occurred. Don't know how to reset this chip.\n");
+ mutex_unlock(&dev->struct_mutex);
return -ENODEV;
}
@@ -388,33 +389,10 @@
* switched away).
*/
if (drm_core_check_feature(dev, DRIVER_MODESET) ||
- !dev_priv->mm.suspended) {
- drm_i915_ring_buffer_t *ring = &dev_priv->ring;
- struct drm_gem_object *obj = ring->ring_obj;
- struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
+ !dev_priv->mm.suspended) {
+ struct intel_ring_buffer *ring = &dev_priv->render_ring;
dev_priv->mm.suspended = 0;
-
- /* Stop the ring if it's running. */
- I915_WRITE(PRB0_CTL, 0);
- I915_WRITE(PRB0_TAIL, 0);
- I915_WRITE(PRB0_HEAD, 0);
-
- /* Initialize the ring. */
- I915_WRITE(PRB0_START, obj_priv->gtt_offset);
- I915_WRITE(PRB0_CTL,
- ((obj->size - 4096) & RING_NR_PAGES) |
- RING_NO_REPORT |
- RING_VALID);
- if (!drm_core_check_feature(dev, DRIVER_MODESET))
- i915_kernel_lost_context(dev);
- else {
- ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
- ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
- ring->space = ring->head - (ring->tail + 8);
- if (ring->space < 0)
- ring->space += ring->Size;
- }
-
+ ring->init(dev, ring);
mutex_unlock(&dev->struct_mutex);
drm_irq_uninstall(dev);
drm_irq_install(dev);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7f797ef..d147ab2 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -32,6 +32,7 @@
#include "i915_reg.h"
#include "intel_bios.h"
+#include "intel_ringbuffer.h"
#include <linux/io-mapping.h>
/* General customization:
@@ -55,6 +56,8 @@
#define I915_NUM_PIPE 2
+#define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+
/* Interface history:
*
* 1.1: Original.
@@ -89,16 +92,6 @@
struct drm_gem_object *cur_obj;
};
-typedef struct _drm_i915_ring_buffer {
- unsigned long Size;
- u8 *virtual_start;
- int head;
- int tail;
- int space;
- drm_local_map_t map;
- struct drm_gem_object *ring_obj;
-} drm_i915_ring_buffer_t;
-
struct mem_block {
struct mem_block *next;
struct mem_block *prev;
@@ -241,17 +234,15 @@
void __iomem *regs;
struct pci_dev *bridge_dev;
- drm_i915_ring_buffer_t ring;
+ struct intel_ring_buffer render_ring;
+ struct intel_ring_buffer bsd_ring;
drm_dma_handle_t *status_page_dmah;
- void *hw_status_page;
void *seqno_page;
dma_addr_t dma_status_page;
uint32_t counter;
- unsigned int status_gfx_addr;
unsigned int seqno_gfx_addr;
drm_local_map_t hws_map;
- struct drm_gem_object *hws_obj;
struct drm_gem_object *seqno_obj;
struct drm_gem_object *pwrctx;
@@ -267,8 +258,6 @@
atomic_t irq_received;
/** Protects user_irq_refcount and irq_mask_reg */
spinlock_t user_irq_lock;
- /** Refcount for i915_user_irq_get() versus i915_user_irq_put(). */
- int user_irq_refcount;
u32 trace_irq_seqno;
/** Cached value of IMR to avoid reads in updating the bitfield */
u32 irq_mask_reg;
@@ -289,6 +278,7 @@
struct mem_block *agp_heap;
unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds;
int vblank_pipe;
+ int num_pipe;
/* For hangcheck timer */
#define DRM_I915_HANGCHECK_PERIOD 75 /* in jiffies */
@@ -334,7 +324,7 @@
int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
int num_fence_regs; /* 8 on pre-965, 16 otherwise */
- unsigned int fsb_freq, mem_freq;
+ unsigned int fsb_freq, mem_freq, is_ddr3;
spinlock_t error_lock;
struct drm_i915_error_state *first_error;
@@ -514,18 +504,7 @@
*/
struct list_head shrink_list;
- /**
- * List of objects currently involved in rendering from the
- * ringbuffer.
- *
- * Includes buffers having the contents of their GPU caches
- * flushed, not necessarily primitives. last_rendering_seqno
- * represents when the rendering involved will be completed.
- *
- * A reference is held on the buffer while on this list.
- */
spinlock_t active_list_lock;
- struct list_head active_list;
/**
* List of objects which are not in the ringbuffer but which
@@ -563,12 +542,6 @@
struct list_head fence_list;
/**
- * List of breadcrumbs associated with GPU requests currently
- * outstanding.
- */
- struct list_head request_list;
-
- /**
* We leave the user IRQ off as much as possible,
* but this means that requests will finish and never
* be retired once the system goes idle. Set a timer to
@@ -623,6 +596,7 @@
struct drm_crtc *plane_to_crtc_mapping[2];
struct drm_crtc *pipe_to_crtc_mapping[2];
wait_queue_head_t pending_flip_queue;
+ bool flip_pending_is_done;
/* Reclocking support */
bool render_reclock_avail;
@@ -644,6 +618,18 @@
u8 cur_delay;
u8 min_delay;
u8 max_delay;
+ u8 fmax;
+ u8 fstart;
+
+ u64 last_count1;
+ unsigned long last_time1;
+ u64 last_count2;
+ struct timespec last_time2;
+ unsigned long gfx_power;
+ int c_m;
+ int r_t;
+ u8 corr;
+ spinlock_t *mchdev_lock;
enum no_fbc_reason no_fbc_reason;
@@ -671,19 +657,64 @@
* (has pending rendering), and is not set if it's on inactive (ready
* to be unbound).
*/
- int active;
+ unsigned int active : 1;
/**
* This is set if the object has been written to since last bound
* to the GTT
*/
- int dirty;
+ unsigned int dirty : 1;
+
+ /**
+ * Fence register bits (if any) for this object. Will be set
+ * as needed when mapped into the GTT.
+ * Protected by dev->struct_mutex.
+ *
+ * Size: 4 bits for 16 fences + sign (for FENCE_REG_NONE)
+ */
+ int fence_reg : 5;
+
+ /**
+ * Used for checking the object doesn't appear more than once
+ * in an execbuffer object list.
+ */
+ unsigned int in_execbuffer : 1;
+
+ /**
+ * Advice: are the backing pages purgeable?
+ */
+ unsigned int madv : 2;
+
+ /**
+ * Refcount for the pages array. With the current locking scheme, there
+ * are at most two concurrent users: Binding a bo to the gtt and
+ * pwrite/pread using physical addresses. So two bits for a maximum
+ * of two users are enough.
+ */
+ unsigned int pages_refcount : 2;
+#define DRM_I915_GEM_OBJECT_MAX_PAGES_REFCOUNT 0x3
+
+ /**
+ * Current tiling mode for the object.
+ */
+ unsigned int tiling_mode : 2;
+
+ /** How many users have pinned this object in GTT space. The following
+ * users can each hold at most one reference: pwrite/pread, pin_ioctl
+ * (via user_pin_count), execbuffer (objects are not allowed multiple
+ * times for the same batchbuffer), and the framebuffer code. When
+ * switching/pageflipping, the framebuffer code has at most two buffers
+ * pinned per crtc.
+ *
+ * In the worst case this is 1 + 1 + 1 + 2*2 = 7. That would fit into 3
+ * bits with absolutely no headroom. So use 4 bits. */
+ int pin_count : 4;
+#define DRM_I915_GEM_OBJECT_MAX_PIN_COUNT 0xf
/** AGP memory structure for our GTT binding. */
DRM_AGP_MEM *agp_mem;
struct page **pages;
- int pages_refcount;
/**
* Current offset of the object in GTT space.
@@ -692,26 +723,18 @@
*/
uint32_t gtt_offset;
+ /* Which ring is refering to is this object */
+ struct intel_ring_buffer *ring;
+
/**
* Fake offset for use by mmap(2)
*/
uint64_t mmap_offset;
- /**
- * Fence register bits (if any) for this object. Will be set
- * as needed when mapped into the GTT.
- * Protected by dev->struct_mutex.
- */
- int fence_reg;
-
- /** How many users have pinned this object in GTT space */
- int pin_count;
-
/** Breadcrumb of last rendering to the buffer. */
uint32_t last_rendering_seqno;
- /** Current tiling mode for the object. */
- uint32_t tiling_mode;
+ /** Current tiling stride for the object, if it's tiled. */
uint32_t stride;
/** Record of address bit 17 of each page at last unbind. */
@@ -734,17 +757,6 @@
struct drm_i915_gem_phys_object *phys_obj;
/**
- * Used for checking the object doesn't appear more than once
- * in an execbuffer object list.
- */
- int in_execbuffer;
-
- /**
- * Advice: are the backing pages purgeable?
- */
- int madv;
-
- /**
* Number of crtcs where this object is currently the fb, but
* will be page flipped away on the next vblank. When it
* reaches 0, dev_priv->pending_flip_queue will be woken up.
@@ -765,6 +777,9 @@
* an emission time with seqnos for tracking how far ahead of the GPU we are.
*/
struct drm_i915_gem_request {
+ /** On Which ring this request was generated */
+ struct intel_ring_buffer *ring;
+
/** GEM sequence number associated with this request. */
uint32_t seqno;
@@ -821,6 +836,11 @@
struct drm_clip_rect *boxes,
int i, int DR1, int DR4);
extern int i965_reset(struct drm_device *dev, u8 flags);
+extern unsigned long i915_chipset_val(struct drm_i915_private *dev_priv);
+extern unsigned long i915_mch_val(struct drm_i915_private *dev_priv);
+extern unsigned long i915_gfx_val(struct drm_i915_private *dev_priv);
+extern void i915_update_gfx_val(struct drm_i915_private *dev_priv);
+
/* i915_irq.c */
void i915_hangcheck_elapsed(unsigned long data);
@@ -829,9 +849,7 @@
struct drm_file *file_priv);
extern int i915_irq_wait(struct drm_device *dev, void *data,
struct drm_file *file_priv);
-void i915_user_irq_get(struct drm_device *dev);
void i915_trace_irq_get(struct drm_device *dev, u32 seqno);
-void i915_user_irq_put(struct drm_device *dev);
extern void i915_enable_interrupt (struct drm_device *dev);
extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS);
@@ -849,6 +867,11 @@
extern int i915_vblank_swap(struct drm_device *dev, void *data,
struct drm_file *file_priv);
extern void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask);
+extern void i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask);
+extern void ironlake_enable_graphics_irq(drm_i915_private_t *dev_priv,
+ u32 mask);
+extern void ironlake_disable_graphics_irq(drm_i915_private_t *dev_priv,
+ u32 mask);
void
i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
@@ -922,11 +945,13 @@
int i915_gem_object_unbind(struct drm_gem_object *obj);
void i915_gem_release_mmap(struct drm_gem_object *obj);
void i915_gem_lastclose(struct drm_device *dev);
-uint32_t i915_get_gem_seqno(struct drm_device *dev);
+uint32_t i915_get_gem_seqno(struct drm_device *dev,
+ struct intel_ring_buffer *ring);
bool i915_seqno_passed(uint32_t seq1, uint32_t seq2);
int i915_gem_object_get_fence_reg(struct drm_gem_object *obj);
int i915_gem_object_put_fence_reg(struct drm_gem_object *obj);
-void i915_gem_retire_requests(struct drm_device *dev);
+void i915_gem_retire_requests(struct drm_device *dev,
+ struct intel_ring_buffer *ring);
void i915_gem_retire_work_handler(struct work_struct *work);
void i915_gem_clflush_object(struct drm_gem_object *obj);
int i915_gem_object_set_domain(struct drm_gem_object *obj,
@@ -937,9 +962,13 @@
int i915_gem_do_init(struct drm_device *dev, unsigned long start,
unsigned long end);
int i915_gem_idle(struct drm_device *dev);
-uint32_t i915_add_request(struct drm_device *dev, struct drm_file *file_priv,
- uint32_t flush_domains);
-int i915_do_wait_request(struct drm_device *dev, uint32_t seqno, int interruptible);
+uint32_t i915_add_request(struct drm_device *dev,
+ struct drm_file *file_priv,
+ uint32_t flush_domains,
+ struct intel_ring_buffer *ring);
+int i915_do_wait_request(struct drm_device *dev,
+ uint32_t seqno, int interruptible,
+ struct intel_ring_buffer *ring);
int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
int write);
@@ -1015,7 +1044,7 @@
extern void intel_disable_fbc(struct drm_device *dev);
extern void intel_enable_fbc(struct drm_crtc *crtc, unsigned long interval);
extern bool intel_fbc_enabled(struct drm_device *dev);
-
+extern bool ironlake_set_drps(struct drm_device *dev, u8 val);
extern void intel_detect_pch (struct drm_device *dev);
extern int intel_trans_dp_port_sel (struct drm_crtc *crtc);
@@ -1026,7 +1055,8 @@
* has access to the ring.
*/
#define RING_LOCK_TEST_WITH_RETURN(dev, file_priv) do { \
- if (((drm_i915_private_t *)dev->dev_private)->ring.ring_obj == NULL) \
+ if (((drm_i915_private_t *)dev->dev_private)->render_ring.gem_object \
+ == NULL) \
LOCK_TEST_WITH_RETURN(dev, file_priv); \
} while (0)
@@ -1039,35 +1069,31 @@
#define I915_WRITE64(reg, val) writeq(val, dev_priv->regs + (reg))
#define I915_READ64(reg) readq(dev_priv->regs + (reg))
#define POSTING_READ(reg) (void)I915_READ(reg)
+#define POSTING_READ16(reg) (void)I915_READ16(reg)
#define I915_VERBOSE 0
-#define RING_LOCALS volatile unsigned int *ring_virt__;
-
-#define BEGIN_LP_RING(n) do { \
- int bytes__ = 4*(n); \
- if (I915_VERBOSE) DRM_DEBUG("BEGIN_LP_RING(%d)\n", (n)); \
- /* a wrap must occur between instructions so pad beforehand */ \
- if (unlikely (dev_priv->ring.tail + bytes__ > dev_priv->ring.Size)) \
- i915_wrap_ring(dev); \
- if (unlikely (dev_priv->ring.space < bytes__)) \
- i915_wait_ring(dev, bytes__, __func__); \
- ring_virt__ = (unsigned int *) \
- (dev_priv->ring.virtual_start + dev_priv->ring.tail); \
- dev_priv->ring.tail += bytes__; \
- dev_priv->ring.tail &= dev_priv->ring.Size - 1; \
- dev_priv->ring.space -= bytes__; \
+#define BEGIN_LP_RING(n) do { \
+ drm_i915_private_t *dev_priv = dev->dev_private; \
+ if (I915_VERBOSE) \
+ DRM_DEBUG(" BEGIN_LP_RING %x\n", (int)(n)); \
+ intel_ring_begin(dev, &dev_priv->render_ring, (n)); \
} while (0)
-#define OUT_RING(n) do { \
- if (I915_VERBOSE) DRM_DEBUG(" OUT_RING %x\n", (int)(n)); \
- *ring_virt__++ = (n); \
+
+#define OUT_RING(x) do { \
+ drm_i915_private_t *dev_priv = dev->dev_private; \
+ if (I915_VERBOSE) \
+ DRM_DEBUG(" OUT_RING %x\n", (int)(x)); \
+ intel_ring_emit(dev, &dev_priv->render_ring, x); \
} while (0)
#define ADVANCE_LP_RING() do { \
+ drm_i915_private_t *dev_priv = dev->dev_private; \
if (I915_VERBOSE) \
- DRM_DEBUG("ADVANCE_LP_RING %x\n", dev_priv->ring.tail); \
- I915_WRITE(PRB0_TAIL, dev_priv->ring.tail); \
+ DRM_DEBUG("ADVANCE_LP_RING %x\n", \
+ dev_priv->render_ring.tail); \
+ intel_ring_advance(dev, &dev_priv->render_ring); \
} while(0)
/**
@@ -1085,14 +1111,12 @@
*
* The area from dword 0x20 to 0x3ff is available for driver usage.
*/
-#define READ_HWSP(dev_priv, reg) (((volatile u32*)(dev_priv->hw_status_page))[reg])
+#define READ_HWSP(dev_priv, reg) (((volatile u32 *)\
+ (dev_priv->render_ring.status_page.page_addr))[reg])
#define READ_BREADCRUMB(dev_priv) READ_HWSP(dev_priv, I915_BREADCRUMB_INDEX)
#define I915_GEM_HWS_INDEX 0x20
#define I915_BREADCRUMB_INDEX 0x21
-extern int i915_wrap_ring(struct drm_device * dev);
-extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
-
#define INTEL_INFO(dev) (((struct drm_i915_private *) (dev)->dev_private)->info)
#define IS_I830(dev) ((dev)->pci_device == 0x3577)
@@ -1138,6 +1162,7 @@
(dev)->pci_device == 0x2A42 || \
(dev)->pci_device == 0x2E42)
+#define HAS_BSD(dev) (IS_IRONLAKE(dev) || IS_G4X(dev))
#define I915_NEED_GFX_HWS(dev) (INTEL_INFO(dev)->need_gfx_hws)
/* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 112699f..51bd301 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -35,8 +35,6 @@
#include <linux/swap.h>
#include <linux/pci.h>
-#define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
-
static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj);
static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj);
static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj);
@@ -169,7 +167,7 @@
obj_priv->tiling_mode != I915_TILING_NONE;
}
-static inline int
+static inline void
slow_shmem_copy(struct page *dst_page,
int dst_offset,
struct page *src_page,
@@ -178,25 +176,16 @@
{
char *dst_vaddr, *src_vaddr;
- dst_vaddr = kmap_atomic(dst_page, KM_USER0);
- if (dst_vaddr == NULL)
- return -ENOMEM;
-
- src_vaddr = kmap_atomic(src_page, KM_USER1);
- if (src_vaddr == NULL) {
- kunmap_atomic(dst_vaddr, KM_USER0);
- return -ENOMEM;
- }
+ dst_vaddr = kmap(dst_page);
+ src_vaddr = kmap(src_page);
memcpy(dst_vaddr + dst_offset, src_vaddr + src_offset, length);
- kunmap_atomic(src_vaddr, KM_USER1);
- kunmap_atomic(dst_vaddr, KM_USER0);
-
- return 0;
+ kunmap(src_page);
+ kunmap(dst_page);
}
-static inline int
+static inline void
slow_shmem_bit17_copy(struct page *gpu_page,
int gpu_offset,
struct page *cpu_page,
@@ -216,15 +205,8 @@
cpu_page, cpu_offset, length);
}
- gpu_vaddr = kmap_atomic(gpu_page, KM_USER0);
- if (gpu_vaddr == NULL)
- return -ENOMEM;
-
- cpu_vaddr = kmap_atomic(cpu_page, KM_USER1);
- if (cpu_vaddr == NULL) {
- kunmap_atomic(gpu_vaddr, KM_USER0);
- return -ENOMEM;
- }
+ gpu_vaddr = kmap(gpu_page);
+ cpu_vaddr = kmap(cpu_page);
/* Copy the data, XORing A6 with A17 (1). The user already knows he's
* XORing with the other bits (A9 for Y, A9 and A10 for X)
@@ -248,10 +230,8 @@
length -= this_length;
}
- kunmap_atomic(cpu_vaddr, KM_USER1);
- kunmap_atomic(gpu_vaddr, KM_USER0);
-
- return 0;
+ kunmap(cpu_page);
+ kunmap(gpu_page);
}
/**
@@ -427,21 +407,19 @@
page_length = PAGE_SIZE - data_page_offset;
if (do_bit17_swizzling) {
- ret = slow_shmem_bit17_copy(obj_priv->pages[shmem_page_index],
- shmem_page_offset,
- user_pages[data_page_index],
- data_page_offset,
- page_length,
- 1);
- } else {
- ret = slow_shmem_copy(user_pages[data_page_index],
- data_page_offset,
- obj_priv->pages[shmem_page_index],
+ slow_shmem_bit17_copy(obj_priv->pages[shmem_page_index],
shmem_page_offset,
- page_length);
+ user_pages[data_page_index],
+ data_page_offset,
+ page_length,
+ 1);
+ } else {
+ slow_shmem_copy(user_pages[data_page_index],
+ data_page_offset,
+ obj_priv->pages[shmem_page_index],
+ shmem_page_offset,
+ page_length);
}
- if (ret)
- goto fail_put_pages;
remain -= page_length;
data_ptr += page_length;
@@ -531,25 +509,24 @@
* page faults
*/
-static inline int
+static inline void
slow_kernel_write(struct io_mapping *mapping,
loff_t gtt_base, int gtt_offset,
struct page *user_page, int user_offset,
int length)
{
- char *src_vaddr, *dst_vaddr;
- unsigned long unwritten;
+ char __iomem *dst_vaddr;
+ char *src_vaddr;
- dst_vaddr = io_mapping_map_atomic_wc(mapping, gtt_base);
- src_vaddr = kmap_atomic(user_page, KM_USER1);
- unwritten = __copy_from_user_inatomic_nocache(dst_vaddr + gtt_offset,
- src_vaddr + user_offset,
- length);
- kunmap_atomic(src_vaddr, KM_USER1);
- io_mapping_unmap_atomic(dst_vaddr);
- if (unwritten)
- return -EFAULT;
- return 0;
+ dst_vaddr = io_mapping_map_wc(mapping, gtt_base);
+ src_vaddr = kmap(user_page);
+
+ memcpy_toio(dst_vaddr + gtt_offset,
+ src_vaddr + user_offset,
+ length);
+
+ kunmap(user_page);
+ io_mapping_unmap(dst_vaddr);
}
static inline int
@@ -722,18 +699,11 @@
if ((data_page_offset + page_length) > PAGE_SIZE)
page_length = PAGE_SIZE - data_page_offset;
- ret = slow_kernel_write(dev_priv->mm.gtt_mapping,
- gtt_page_base, gtt_page_offset,
- user_pages[data_page_index],
- data_page_offset,
- page_length);
-
- /* If we get a fault while copying data, then (presumably) our
- * source page isn't available. Return the error and we'll
- * retry in the slow path.
- */
- if (ret)
- goto out_unpin_object;
+ slow_kernel_write(dev_priv->mm.gtt_mapping,
+ gtt_page_base, gtt_page_offset,
+ user_pages[data_page_index],
+ data_page_offset,
+ page_length);
remain -= page_length;
offset += page_length;
@@ -902,21 +872,19 @@
page_length = PAGE_SIZE - data_page_offset;
if (do_bit17_swizzling) {
- ret = slow_shmem_bit17_copy(obj_priv->pages[shmem_page_index],
- shmem_page_offset,
- user_pages[data_page_index],
- data_page_offset,
- page_length,
- 0);
- } else {
- ret = slow_shmem_copy(obj_priv->pages[shmem_page_index],
+ slow_shmem_bit17_copy(obj_priv->pages[shmem_page_index],
shmem_page_offset,
user_pages[data_page_index],
data_page_offset,
- page_length);
+ page_length,
+ 0);
+ } else {
+ slow_shmem_copy(obj_priv->pages[shmem_page_index],
+ shmem_page_offset,
+ user_pages[data_page_index],
+ data_page_offset,
+ page_length);
}
- if (ret)
- goto fail_put_pages;
remain -= page_length;
data_ptr += page_length;
@@ -973,7 +941,8 @@
if (obj_priv->phys_obj)
ret = i915_gem_phys_pwrite(dev, obj, args, file_priv);
else if (obj_priv->tiling_mode == I915_TILING_NONE &&
- dev->gtt_total != 0) {
+ dev->gtt_total != 0 &&
+ obj->write_domain != I915_GEM_DOMAIN_CPU) {
ret = i915_gem_gtt_pwrite_fast(dev, obj, args, file_priv);
if (ret == -EFAULT) {
ret = i915_gem_gtt_pwrite_slow(dev, obj, args,
@@ -1484,11 +1453,14 @@
}
static void
-i915_gem_object_move_to_active(struct drm_gem_object *obj, uint32_t seqno)
+i915_gem_object_move_to_active(struct drm_gem_object *obj, uint32_t seqno,
+ struct intel_ring_buffer *ring)
{
struct drm_device *dev = obj->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
+ BUG_ON(ring == NULL);
+ obj_priv->ring = ring;
/* Add a reference if we're newly entering the active list. */
if (!obj_priv->active) {
@@ -1497,8 +1469,7 @@
}
/* Move from whatever list we were on to the tail of execution. */
spin_lock(&dev_priv->mm.active_list_lock);
- list_move_tail(&obj_priv->list,
- &dev_priv->mm.active_list);
+ list_move_tail(&obj_priv->list, &ring->active_list);
spin_unlock(&dev_priv->mm.active_list_lock);
obj_priv->last_rendering_seqno = seqno;
}
@@ -1551,6 +1522,7 @@
BUG_ON(!list_empty(&obj_priv->gpu_write_list));
obj_priv->last_rendering_seqno = 0;
+ obj_priv->ring = NULL;
if (obj_priv->active) {
obj_priv->active = 0;
drm_gem_object_unreference(obj);
@@ -1560,7 +1532,8 @@
static void
i915_gem_process_flushing_list(struct drm_device *dev,
- uint32_t flush_domains, uint32_t seqno)
+ uint32_t flush_domains, uint32_t seqno,
+ struct intel_ring_buffer *ring)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj_priv, *next;
@@ -1571,12 +1544,13 @@
struct drm_gem_object *obj = &obj_priv->base;
if ((obj->write_domain & flush_domains) ==
- obj->write_domain) {
+ obj->write_domain &&
+ obj_priv->ring->ring_flag == ring->ring_flag) {
uint32_t old_write_domain = obj->write_domain;
obj->write_domain = 0;
list_del_init(&obj_priv->gpu_write_list);
- i915_gem_object_move_to_active(obj, seqno);
+ i915_gem_object_move_to_active(obj, seqno, ring);
/* update the fence lru list */
if (obj_priv->fence_reg != I915_FENCE_REG_NONE) {
@@ -1593,31 +1567,15 @@
}
}
-#define PIPE_CONTROL_FLUSH(addr) \
- OUT_RING(GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE | \
- PIPE_CONTROL_DEPTH_STALL); \
- OUT_RING(addr | PIPE_CONTROL_GLOBAL_GTT); \
- OUT_RING(0); \
- OUT_RING(0); \
-
-/**
- * Creates a new sequence number, emitting a write of it to the status page
- * plus an interrupt, which will trigger i915_user_interrupt_handler.
- *
- * Must be called with struct_lock held.
- *
- * Returned sequence numbers are nonzero on success.
- */
uint32_t
i915_add_request(struct drm_device *dev, struct drm_file *file_priv,
- uint32_t flush_domains)
+ uint32_t flush_domains, struct intel_ring_buffer *ring)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_file_private *i915_file_priv = NULL;
struct drm_i915_gem_request *request;
uint32_t seqno;
int was_empty;
- RING_LOCALS;
if (file_priv != NULL)
i915_file_priv = file_priv->driver_priv;
@@ -1626,62 +1584,14 @@
if (request == NULL)
return 0;
- /* Grab the seqno we're going to make this request be, and bump the
- * next (skipping 0 so it can be the reserved no-seqno value).
- */
- seqno = dev_priv->mm.next_gem_seqno;
- dev_priv->mm.next_gem_seqno++;
- if (dev_priv->mm.next_gem_seqno == 0)
- dev_priv->mm.next_gem_seqno++;
-
- if (HAS_PIPE_CONTROL(dev)) {
- u32 scratch_addr = dev_priv->seqno_gfx_addr + 128;
-
- /*
- * Workaround qword write incoherence by flushing the
- * PIPE_NOTIFY buffers out to memory before requesting
- * an interrupt.
- */
- BEGIN_LP_RING(32);
- OUT_RING(GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE |
- PIPE_CONTROL_WC_FLUSH | PIPE_CONTROL_TC_FLUSH);
- OUT_RING(dev_priv->seqno_gfx_addr | PIPE_CONTROL_GLOBAL_GTT);
- OUT_RING(seqno);
- OUT_RING(0);
- PIPE_CONTROL_FLUSH(scratch_addr);
- scratch_addr += 128; /* write to separate cachelines */
- PIPE_CONTROL_FLUSH(scratch_addr);
- scratch_addr += 128;
- PIPE_CONTROL_FLUSH(scratch_addr);
- scratch_addr += 128;
- PIPE_CONTROL_FLUSH(scratch_addr);
- scratch_addr += 128;
- PIPE_CONTROL_FLUSH(scratch_addr);
- scratch_addr += 128;
- PIPE_CONTROL_FLUSH(scratch_addr);
- OUT_RING(GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE |
- PIPE_CONTROL_WC_FLUSH | PIPE_CONTROL_TC_FLUSH |
- PIPE_CONTROL_NOTIFY);
- OUT_RING(dev_priv->seqno_gfx_addr | PIPE_CONTROL_GLOBAL_GTT);
- OUT_RING(seqno);
- OUT_RING(0);
- ADVANCE_LP_RING();
- } else {
- BEGIN_LP_RING(4);
- OUT_RING(MI_STORE_DWORD_INDEX);
- OUT_RING(I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
- OUT_RING(seqno);
-
- OUT_RING(MI_USER_INTERRUPT);
- ADVANCE_LP_RING();
- }
-
- DRM_DEBUG_DRIVER("%d\n", seqno);
+ seqno = ring->add_request(dev, ring, file_priv, flush_domains);
request->seqno = seqno;
+ request->ring = ring;
request->emitted_jiffies = jiffies;
- was_empty = list_empty(&dev_priv->mm.request_list);
- list_add_tail(&request->list, &dev_priv->mm.request_list);
+ was_empty = list_empty(&ring->request_list);
+ list_add_tail(&request->list, &ring->request_list);
+
if (i915_file_priv) {
list_add_tail(&request->client_list,
&i915_file_priv->mm.request_list);
@@ -1693,7 +1603,7 @@
* domain we're flushing with our flush.
*/
if (flush_domains != 0)
- i915_gem_process_flushing_list(dev, flush_domains, seqno);
+ i915_gem_process_flushing_list(dev, flush_domains, seqno, ring);
if (!dev_priv->mm.suspended) {
mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
@@ -1710,20 +1620,16 @@
* before signalling the CPU
*/
static uint32_t
-i915_retire_commands(struct drm_device *dev)
+i915_retire_commands(struct drm_device *dev, struct intel_ring_buffer *ring)
{
- drm_i915_private_t *dev_priv = dev->dev_private;
- uint32_t cmd = MI_FLUSH | MI_NO_WRITE_FLUSH;
uint32_t flush_domains = 0;
- RING_LOCALS;
/* The sampler always gets flushed on i965 (sigh) */
if (IS_I965G(dev))
flush_domains |= I915_GEM_DOMAIN_SAMPLER;
- BEGIN_LP_RING(2);
- OUT_RING(cmd);
- OUT_RING(0); /* noop */
- ADVANCE_LP_RING();
+
+ ring->flush(dev, ring,
+ I915_GEM_DOMAIN_COMMAND, flush_domains);
return flush_domains;
}
@@ -1743,11 +1649,11 @@
* by the ringbuffer to the flushing/inactive lists as appropriate.
*/
spin_lock(&dev_priv->mm.active_list_lock);
- while (!list_empty(&dev_priv->mm.active_list)) {
+ while (!list_empty(&request->ring->active_list)) {
struct drm_gem_object *obj;
struct drm_i915_gem_object *obj_priv;
- obj_priv = list_first_entry(&dev_priv->mm.active_list,
+ obj_priv = list_first_entry(&request->ring->active_list,
struct drm_i915_gem_object,
list);
obj = &obj_priv->base;
@@ -1794,35 +1700,33 @@
}
uint32_t
-i915_get_gem_seqno(struct drm_device *dev)
+i915_get_gem_seqno(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
{
- drm_i915_private_t *dev_priv = dev->dev_private;
-
- if (HAS_PIPE_CONTROL(dev))
- return ((volatile u32 *)(dev_priv->seqno_page))[0];
- else
- return READ_HWSP(dev_priv, I915_GEM_HWS_INDEX);
+ return ring->get_gem_seqno(dev, ring);
}
/**
* This function clears the request list as sequence numbers are passed.
*/
void
-i915_gem_retire_requests(struct drm_device *dev)
+i915_gem_retire_requests(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
{
drm_i915_private_t *dev_priv = dev->dev_private;
uint32_t seqno;
- if (!dev_priv->hw_status_page || list_empty(&dev_priv->mm.request_list))
+ if (!ring->status_page.page_addr
+ || list_empty(&ring->request_list))
return;
- seqno = i915_get_gem_seqno(dev);
+ seqno = i915_get_gem_seqno(dev, ring);
- while (!list_empty(&dev_priv->mm.request_list)) {
+ while (!list_empty(&ring->request_list)) {
struct drm_i915_gem_request *request;
uint32_t retiring_seqno;
- request = list_first_entry(&dev_priv->mm.request_list,
+ request = list_first_entry(&ring->request_list,
struct drm_i915_gem_request,
list);
retiring_seqno = request->seqno;
@@ -1840,7 +1744,8 @@
if (unlikely (dev_priv->trace_irq_seqno &&
i915_seqno_passed(dev_priv->trace_irq_seqno, seqno))) {
- i915_user_irq_put(dev);
+
+ ring->user_irq_put(dev, ring);
dev_priv->trace_irq_seqno = 0;
}
}
@@ -1856,15 +1761,22 @@
dev = dev_priv->dev;
mutex_lock(&dev->struct_mutex);
- i915_gem_retire_requests(dev);
+ i915_gem_retire_requests(dev, &dev_priv->render_ring);
+
+ if (HAS_BSD(dev))
+ i915_gem_retire_requests(dev, &dev_priv->bsd_ring);
+
if (!dev_priv->mm.suspended &&
- !list_empty(&dev_priv->mm.request_list))
+ (!list_empty(&dev_priv->render_ring.request_list) ||
+ (HAS_BSD(dev) &&
+ !list_empty(&dev_priv->bsd_ring.request_list))))
queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
mutex_unlock(&dev->struct_mutex);
}
int
-i915_do_wait_request(struct drm_device *dev, uint32_t seqno, int interruptible)
+i915_do_wait_request(struct drm_device *dev, uint32_t seqno,
+ int interruptible, struct intel_ring_buffer *ring)
{
drm_i915_private_t *dev_priv = dev->dev_private;
u32 ier;
@@ -1875,7 +1787,7 @@
if (atomic_read(&dev_priv->mm.wedged))
return -EIO;
- if (!i915_seqno_passed(i915_get_gem_seqno(dev), seqno)) {
+ if (!i915_seqno_passed(ring->get_gem_seqno(dev, ring), seqno)) {
if (HAS_PCH_SPLIT(dev))
ier = I915_READ(DEIER) | I915_READ(GTIER);
else
@@ -1889,19 +1801,21 @@
trace_i915_gem_request_wait_begin(dev, seqno);
- dev_priv->mm.waiting_gem_seqno = seqno;
- i915_user_irq_get(dev);
+ ring->waiting_gem_seqno = seqno;
+ ring->user_irq_get(dev, ring);
if (interruptible)
- ret = wait_event_interruptible(dev_priv->irq_queue,
- i915_seqno_passed(i915_get_gem_seqno(dev), seqno) ||
- atomic_read(&dev_priv->mm.wedged));
+ ret = wait_event_interruptible(ring->irq_queue,
+ i915_seqno_passed(
+ ring->get_gem_seqno(dev, ring), seqno)
+ || atomic_read(&dev_priv->mm.wedged));
else
- wait_event(dev_priv->irq_queue,
- i915_seqno_passed(i915_get_gem_seqno(dev), seqno) ||
- atomic_read(&dev_priv->mm.wedged));
+ wait_event(ring->irq_queue,
+ i915_seqno_passed(
+ ring->get_gem_seqno(dev, ring), seqno)
+ || atomic_read(&dev_priv->mm.wedged));
- i915_user_irq_put(dev);
- dev_priv->mm.waiting_gem_seqno = 0;
+ ring->user_irq_put(dev, ring);
+ ring->waiting_gem_seqno = 0;
trace_i915_gem_request_wait_end(dev, seqno);
}
@@ -1910,7 +1824,7 @@
if (ret && ret != -ERESTARTSYS)
DRM_ERROR("%s returns %d (awaiting %d at %d)\n",
- __func__, ret, seqno, i915_get_gem_seqno(dev));
+ __func__, ret, seqno, ring->get_gem_seqno(dev, ring));
/* Directly dispatch request retiring. While we have the work queue
* to handle this, the waiter on a request often wants an associated
@@ -1918,7 +1832,7 @@
* a separate wait queue to handle that.
*/
if (ret == 0)
- i915_gem_retire_requests(dev);
+ i915_gem_retire_requests(dev, ring);
return ret;
}
@@ -1928,9 +1842,10 @@
* request and object lists appropriately for that event.
*/
static int
-i915_wait_request(struct drm_device *dev, uint32_t seqno)
+i915_wait_request(struct drm_device *dev, uint32_t seqno,
+ struct intel_ring_buffer *ring)
{
- return i915_do_wait_request(dev, seqno, 1);
+ return i915_do_wait_request(dev, seqno, 1, ring);
}
static void
@@ -1939,71 +1854,29 @@
uint32_t flush_domains)
{
drm_i915_private_t *dev_priv = dev->dev_private;
- uint32_t cmd;
- RING_LOCALS;
-
-#if WATCH_EXEC
- DRM_INFO("%s: invalidate %08x flush %08x\n", __func__,
- invalidate_domains, flush_domains);
-#endif
- trace_i915_gem_request_flush(dev, dev_priv->mm.next_gem_seqno,
- invalidate_domains, flush_domains);
-
if (flush_domains & I915_GEM_DOMAIN_CPU)
drm_agp_chipset_flush(dev);
+ dev_priv->render_ring.flush(dev, &dev_priv->render_ring,
+ invalidate_domains,
+ flush_domains);
- if ((invalidate_domains | flush_domains) & I915_GEM_GPU_DOMAINS) {
- /*
- * read/write caches:
- *
- * I915_GEM_DOMAIN_RENDER is always invalidated, but is
- * only flushed if MI_NO_WRITE_FLUSH is unset. On 965, it is
- * also flushed at 2d versus 3d pipeline switches.
- *
- * read-only caches:
- *
- * I915_GEM_DOMAIN_SAMPLER is flushed on pre-965 if
- * MI_READ_FLUSH is set, and is always flushed on 965.
- *
- * I915_GEM_DOMAIN_COMMAND may not exist?
- *
- * I915_GEM_DOMAIN_INSTRUCTION, which exists on 965, is
- * invalidated when MI_EXE_FLUSH is set.
- *
- * I915_GEM_DOMAIN_VERTEX, which exists on 965, is
- * invalidated with every MI_FLUSH.
- *
- * TLBs:
- *
- * On 965, TLBs associated with I915_GEM_DOMAIN_COMMAND
- * and I915_GEM_DOMAIN_CPU in are invalidated at PTE write and
- * I915_GEM_DOMAIN_RENDER and I915_GEM_DOMAIN_SAMPLER
- * are flushed at any MI_FLUSH.
- */
+ if (HAS_BSD(dev))
+ dev_priv->bsd_ring.flush(dev, &dev_priv->bsd_ring,
+ invalidate_domains,
+ flush_domains);
+}
- cmd = MI_FLUSH | MI_NO_WRITE_FLUSH;
- if ((invalidate_domains|flush_domains) &
- I915_GEM_DOMAIN_RENDER)
- cmd &= ~MI_NO_WRITE_FLUSH;
- if (!IS_I965G(dev)) {
- /*
- * On the 965, the sampler cache always gets flushed
- * and this bit is reserved.
- */
- if (invalidate_domains & I915_GEM_DOMAIN_SAMPLER)
- cmd |= MI_READ_FLUSH;
- }
- if (invalidate_domains & I915_GEM_DOMAIN_INSTRUCTION)
- cmd |= MI_EXE_FLUSH;
-
-#if WATCH_EXEC
- DRM_INFO("%s: queue flush %08x to ring\n", __func__, cmd);
-#endif
- BEGIN_LP_RING(2);
- OUT_RING(cmd);
- OUT_RING(MI_NOOP);
- ADVANCE_LP_RING();
- }
+static void
+i915_gem_flush_ring(struct drm_device *dev,
+ uint32_t invalidate_domains,
+ uint32_t flush_domains,
+ struct intel_ring_buffer *ring)
+{
+ if (flush_domains & I915_GEM_DOMAIN_CPU)
+ drm_agp_chipset_flush(dev);
+ ring->flush(dev, ring,
+ invalidate_domains,
+ flush_domains);
}
/**
@@ -2030,7 +1903,8 @@
DRM_INFO("%s: object %p wait for seqno %08x\n",
__func__, obj, obj_priv->last_rendering_seqno);
#endif
- ret = i915_wait_request(dev, obj_priv->last_rendering_seqno);
+ ret = i915_wait_request(dev,
+ obj_priv->last_rendering_seqno, obj_priv->ring);
if (ret != 0)
return ret;
}
@@ -2146,11 +2020,14 @@
{
drm_i915_private_t *dev_priv = dev->dev_private;
bool lists_empty;
- uint32_t seqno;
+ uint32_t seqno1, seqno2;
+ int ret;
spin_lock(&dev_priv->mm.active_list_lock);
- lists_empty = list_empty(&dev_priv->mm.flushing_list) &&
- list_empty(&dev_priv->mm.active_list);
+ lists_empty = (list_empty(&dev_priv->mm.flushing_list) &&
+ list_empty(&dev_priv->render_ring.active_list) &&
+ (!HAS_BSD(dev) ||
+ list_empty(&dev_priv->bsd_ring.active_list)));
spin_unlock(&dev_priv->mm.active_list_lock);
if (lists_empty)
@@ -2158,11 +2035,25 @@
/* Flush everything onto the inactive list. */
i915_gem_flush(dev, I915_GEM_GPU_DOMAINS, I915_GEM_GPU_DOMAINS);
- seqno = i915_add_request(dev, NULL, I915_GEM_GPU_DOMAINS);
- if (seqno == 0)
+ seqno1 = i915_add_request(dev, NULL, I915_GEM_GPU_DOMAINS,
+ &dev_priv->render_ring);
+ if (seqno1 == 0)
return -ENOMEM;
+ ret = i915_wait_request(dev, seqno1, &dev_priv->render_ring);
- return i915_wait_request(dev, seqno);
+ if (HAS_BSD(dev)) {
+ seqno2 = i915_add_request(dev, NULL, I915_GEM_GPU_DOMAINS,
+ &dev_priv->bsd_ring);
+ if (seqno2 == 0)
+ return -ENOMEM;
+
+ ret = i915_wait_request(dev, seqno2, &dev_priv->bsd_ring);
+ if (ret)
+ return ret;
+ }
+
+
+ return ret;
}
static int
@@ -2175,7 +2066,9 @@
spin_lock(&dev_priv->mm.active_list_lock);
lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
list_empty(&dev_priv->mm.flushing_list) &&
- list_empty(&dev_priv->mm.active_list));
+ list_empty(&dev_priv->render_ring.active_list) &&
+ (!HAS_BSD(dev)
+ || list_empty(&dev_priv->bsd_ring.active_list)));
spin_unlock(&dev_priv->mm.active_list_lock);
if (lists_empty)
@@ -2195,7 +2088,9 @@
spin_lock(&dev_priv->mm.active_list_lock);
lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
list_empty(&dev_priv->mm.flushing_list) &&
- list_empty(&dev_priv->mm.active_list));
+ list_empty(&dev_priv->render_ring.active_list) &&
+ (!HAS_BSD(dev)
+ || list_empty(&dev_priv->bsd_ring.active_list)));
spin_unlock(&dev_priv->mm.active_list_lock);
BUG_ON(!lists_empty);
@@ -2209,8 +2104,13 @@
struct drm_gem_object *obj;
int ret;
+ struct intel_ring_buffer *render_ring = &dev_priv->render_ring;
+ struct intel_ring_buffer *bsd_ring = &dev_priv->bsd_ring;
for (;;) {
- i915_gem_retire_requests(dev);
+ i915_gem_retire_requests(dev, render_ring);
+
+ if (HAS_BSD(dev))
+ i915_gem_retire_requests(dev, bsd_ring);
/* If there's an inactive buffer available now, grab it
* and be done.
@@ -2234,14 +2134,30 @@
* things, wait for the next to finish and hopefully leave us
* a buffer to evict.
*/
- if (!list_empty(&dev_priv->mm.request_list)) {
+ if (!list_empty(&render_ring->request_list)) {
struct drm_i915_gem_request *request;
- request = list_first_entry(&dev_priv->mm.request_list,
+ request = list_first_entry(&render_ring->request_list,
struct drm_i915_gem_request,
list);
- ret = i915_wait_request(dev, request->seqno);
+ ret = i915_wait_request(dev,
+ request->seqno, request->ring);
+ if (ret)
+ return ret;
+
+ continue;
+ }
+
+ if (HAS_BSD(dev) && !list_empty(&bsd_ring->request_list)) {
+ struct drm_i915_gem_request *request;
+
+ request = list_first_entry(&bsd_ring->request_list,
+ struct drm_i915_gem_request,
+ list);
+
+ ret = i915_wait_request(dev,
+ request->seqno, request->ring);
if (ret)
return ret;
@@ -2268,10 +2184,13 @@
if (obj != NULL) {
uint32_t seqno;
- i915_gem_flush(dev,
+ i915_gem_flush_ring(dev,
obj->write_domain,
- obj->write_domain);
- seqno = i915_add_request(dev, NULL, obj->write_domain);
+ obj->write_domain,
+ obj_priv->ring);
+ seqno = i915_add_request(dev, NULL,
+ obj->write_domain,
+ obj_priv->ring);
if (seqno == 0)
return -ENOMEM;
continue;
@@ -2299,6 +2218,9 @@
struct inode *inode;
struct page *page;
+ BUG_ON(obj_priv->pages_refcount
+ == DRM_I915_GEM_OBJECT_MAX_PAGES_REFCOUNT);
+
if (obj_priv->pages_refcount++ != 0)
return 0;
@@ -2317,8 +2239,9 @@
mapping = inode->i_mapping;
for (i = 0; i < page_count; i++) {
page = read_cache_page_gfp(mapping, i,
- mapping_gfp_mask (mapping) |
+ GFP_HIGHUSER |
__GFP_COLD |
+ __GFP_RECLAIMABLE |
gfpmask);
if (IS_ERR(page))
goto err_pages;
@@ -2697,6 +2620,14 @@
return -EINVAL;
}
+ /* If the object is bigger than the entire aperture, reject it early
+ * before evicting everything in a vain attempt to find space.
+ */
+ if (obj->size > dev->gtt_total) {
+ DRM_ERROR("Attempting to bind an object larger than the aperture\n");
+ return -E2BIG;
+ }
+
search_free:
free_space = drm_mm_search_free(&dev_priv->mm.gtt_space,
obj->size, alignment, 0);
@@ -2807,6 +2738,7 @@
{
struct drm_device *dev = obj->dev;
uint32_t old_write_domain;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
if ((obj->write_domain & I915_GEM_GPU_DOMAINS) == 0)
return;
@@ -2814,7 +2746,7 @@
/* Queue the GPU write cache flushing we need. */
old_write_domain = obj->write_domain;
i915_gem_flush(dev, 0, obj->write_domain);
- (void) i915_add_request(dev, NULL, obj->write_domain);
+ (void) i915_add_request(dev, NULL, obj->write_domain, obj_priv->ring);
BUG_ON(obj->write_domain);
trace_i915_gem_object_change_domain(obj,
@@ -2954,23 +2886,24 @@
DRM_INFO("%s: object %p wait for seqno %08x\n",
__func__, obj, obj_priv->last_rendering_seqno);
#endif
- ret = i915_do_wait_request(dev, obj_priv->last_rendering_seqno, 0);
+ ret = i915_do_wait_request(dev,
+ obj_priv->last_rendering_seqno,
+ 0,
+ obj_priv->ring);
if (ret != 0)
return ret;
}
+ i915_gem_object_flush_cpu_write_domain(obj);
+
old_write_domain = obj->write_domain;
old_read_domains = obj->read_domains;
- obj->read_domains &= I915_GEM_DOMAIN_GTT;
-
- i915_gem_object_flush_cpu_write_domain(obj);
-
/* It should now be out of any other write domains, and we can update
* the domain values for our changes.
*/
BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0);
- obj->read_domains |= I915_GEM_DOMAIN_GTT;
+ obj->read_domains = I915_GEM_DOMAIN_GTT;
obj->write_domain = I915_GEM_DOMAIN_GTT;
obj_priv->dirty = 1;
@@ -3354,9 +3287,13 @@
obj_priv->tiling_mode != I915_TILING_NONE;
/* Check fence reg constraints and rebind if necessary */
- if (need_fence && !i915_gem_object_fence_offset_ok(obj,
- obj_priv->tiling_mode))
- i915_gem_object_unbind(obj);
+ if (need_fence &&
+ !i915_gem_object_fence_offset_ok(obj,
+ obj_priv->tiling_mode)) {
+ ret = i915_gem_object_unbind(obj);
+ if (ret)
+ return ret;
+ }
/* Choose the GTT offset for our buffer and put it there. */
ret = i915_gem_object_pin(obj, (uint32_t) entry->alignment);
@@ -3370,9 +3307,6 @@
if (need_fence) {
ret = i915_gem_object_get_fence_reg(obj);
if (ret != 0) {
- if (ret != -EBUSY && ret != -ERESTARTSYS)
- DRM_ERROR("Failure to install fence: %d\n",
- ret);
i915_gem_object_unpin(obj);
return ret;
}
@@ -3545,62 +3479,6 @@
return 0;
}
-/** Dispatch a batchbuffer to the ring
- */
-static int
-i915_dispatch_gem_execbuffer(struct drm_device *dev,
- struct drm_i915_gem_execbuffer2 *exec,
- struct drm_clip_rect *cliprects,
- uint64_t exec_offset)
-{
- drm_i915_private_t *dev_priv = dev->dev_private;
- int nbox = exec->num_cliprects;
- int i = 0, count;
- uint32_t exec_start, exec_len;
- RING_LOCALS;
-
- exec_start = (uint32_t) exec_offset + exec->batch_start_offset;
- exec_len = (uint32_t) exec->batch_len;
-
- trace_i915_gem_request_submit(dev, dev_priv->mm.next_gem_seqno + 1);
-
- count = nbox ? nbox : 1;
-
- for (i = 0; i < count; i++) {
- if (i < nbox) {
- int ret = i915_emit_box(dev, cliprects, i,
- exec->DR1, exec->DR4);
- if (ret)
- return ret;
- }
-
- if (IS_I830(dev) || IS_845G(dev)) {
- BEGIN_LP_RING(4);
- OUT_RING(MI_BATCH_BUFFER);
- OUT_RING(exec_start | MI_BATCH_NON_SECURE);
- OUT_RING(exec_start + exec_len - 4);
- OUT_RING(0);
- ADVANCE_LP_RING();
- } else {
- BEGIN_LP_RING(2);
- if (IS_I965G(dev)) {
- OUT_RING(MI_BATCH_BUFFER_START |
- (2 << 6) |
- MI_BATCH_NON_SECURE_I965);
- OUT_RING(exec_start);
- } else {
- OUT_RING(MI_BATCH_BUFFER_START |
- (2 << 6));
- OUT_RING(exec_start | MI_BATCH_NON_SECURE);
- }
- ADVANCE_LP_RING();
- }
- }
-
- /* XXX breadcrumb */
- return 0;
-}
-
/* Throttle our rendering by waiting until the ring has completed our requests
* emitted over 20 msec ago.
*
@@ -3629,7 +3507,7 @@
if (time_after_eq(request->emitted_jiffies, recent_enough))
break;
- ret = i915_wait_request(dev, request->seqno);
+ ret = i915_wait_request(dev, request->seqno, request->ring);
if (ret != 0)
break;
}
@@ -3786,10 +3664,22 @@
uint32_t seqno, flush_domains, reloc_index;
int pin_tries, flips;
+ struct intel_ring_buffer *ring = NULL;
+
#if WATCH_EXEC
DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n",
(int) args->buffers_ptr, args->buffer_count, args->batch_len);
#endif
+ if (args->flags & I915_EXEC_BSD) {
+ if (!HAS_BSD(dev)) {
+ DRM_ERROR("execbuf with wrong flag\n");
+ return -EINVAL;
+ }
+ ring = &dev_priv->bsd_ring;
+ } else {
+ ring = &dev_priv->render_ring;
+ }
+
if (args->buffer_count < 1) {
DRM_ERROR("execbuf with %d buffers\n", args->buffer_count);
@@ -3902,11 +3792,19 @@
if (ret != -ENOSPC || pin_tries >= 1) {
if (ret != -ERESTARTSYS) {
unsigned long long total_size = 0;
- for (i = 0; i < args->buffer_count; i++)
+ int num_fences = 0;
+ for (i = 0; i < args->buffer_count; i++) {
+ obj_priv = object_list[i]->driver_private;
+
total_size += object_list[i]->size;
- DRM_ERROR("Failed to pin buffer %d of %d, total %llu bytes: %d\n",
+ num_fences +=
+ exec_list[i].flags & EXEC_OBJECT_NEEDS_FENCE &&
+ obj_priv->tiling_mode != I915_TILING_NONE;
+ }
+ DRM_ERROR("Failed to pin buffer %d of %d, total %llu bytes, %d fences: %d\n",
pinned+1, args->buffer_count,
- total_size, ret);
+ total_size, num_fences,
+ ret);
DRM_ERROR("%d objects [%d pinned], "
"%d object bytes [%d pinned], "
"%d/%d gtt bytes\n",
@@ -3976,9 +3874,16 @@
i915_gem_flush(dev,
dev->invalidate_domains,
dev->flush_domains);
- if (dev->flush_domains & I915_GEM_GPU_DOMAINS)
+ if (dev->flush_domains & I915_GEM_GPU_DOMAINS) {
(void)i915_add_request(dev, file_priv,
- dev->flush_domains);
+ dev->flush_domains,
+ &dev_priv->render_ring);
+
+ if (HAS_BSD(dev))
+ (void)i915_add_request(dev, file_priv,
+ dev->flush_domains,
+ &dev_priv->bsd_ring);
+ }
}
for (i = 0; i < args->buffer_count; i++) {
@@ -4015,7 +3920,8 @@
#endif
/* Exec the batchbuffer */
- ret = i915_dispatch_gem_execbuffer(dev, args, cliprects, exec_offset);
+ ret = ring->dispatch_gem_execbuffer(dev, ring, args,
+ cliprects, exec_offset);
if (ret) {
DRM_ERROR("dispatch failed %d\n", ret);
goto err;
@@ -4025,7 +3931,7 @@
* Ensure that the commands in the batch buffer are
* finished before the interrupt fires
*/
- flush_domains = i915_retire_commands(dev);
+ flush_domains = i915_retire_commands(dev, ring);
i915_verify_inactive(dev, __FILE__, __LINE__);
@@ -4036,12 +3942,13 @@
* *some* interrupts representing completion of buffers that we can
* wait on when trying to clear up gtt space).
*/
- seqno = i915_add_request(dev, file_priv, flush_domains);
+ seqno = i915_add_request(dev, file_priv, flush_domains, ring);
BUG_ON(seqno == 0);
for (i = 0; i < args->buffer_count; i++) {
struct drm_gem_object *obj = object_list[i];
+ obj_priv = to_intel_bo(obj);
- i915_gem_object_move_to_active(obj, seqno);
+ i915_gem_object_move_to_active(obj, seqno, ring);
#if WATCH_LRU
DRM_INFO("%s: move to exec list %p\n", __func__, obj);
#endif
@@ -4153,7 +4060,7 @@
exec2.DR4 = args->DR4;
exec2.num_cliprects = args->num_cliprects;
exec2.cliprects_ptr = args->cliprects_ptr;
- exec2.flags = 0;
+ exec2.flags = I915_EXEC_RENDER;
ret = i915_gem_do_execbuffer(dev, data, file_priv, &exec2, exec2_list);
if (!ret) {
@@ -4239,7 +4146,20 @@
struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
int ret;
+ BUG_ON(obj_priv->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT);
+
i915_verify_inactive(dev, __FILE__, __LINE__);
+
+ if (obj_priv->gtt_space != NULL) {
+ if (alignment == 0)
+ alignment = i915_gem_get_gtt_alignment(obj);
+ if (obj_priv->gtt_offset & (alignment - 1)) {
+ ret = i915_gem_object_unbind(obj);
+ if (ret)
+ return ret;
+ }
+ }
+
if (obj_priv->gtt_space == NULL) {
ret = i915_gem_object_bind_to_gtt(obj, alignment);
if (ret)
@@ -4392,6 +4312,7 @@
struct drm_i915_gem_busy *args = data;
struct drm_gem_object *obj;
struct drm_i915_gem_object *obj_priv;
+ drm_i915_private_t *dev_priv = dev->dev_private;
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
if (obj == NULL) {
@@ -4406,7 +4327,10 @@
* actually unmasked, and our working set ends up being larger than
* required.
*/
- i915_gem_retire_requests(dev);
+ i915_gem_retire_requests(dev, &dev_priv->render_ring);
+
+ if (HAS_BSD(dev))
+ i915_gem_retire_requests(dev, &dev_priv->bsd_ring);
obj_priv = to_intel_bo(obj);
/* Don't count being on the flushing list against the object being
@@ -4573,7 +4497,10 @@
mutex_lock(&dev->struct_mutex);
- if (dev_priv->mm.suspended || dev_priv->ring.ring_obj == NULL) {
+ if (dev_priv->mm.suspended ||
+ (dev_priv->render_ring.gem_object == NULL) ||
+ (HAS_BSD(dev) &&
+ dev_priv->bsd_ring.gem_object == NULL)) {
mutex_unlock(&dev->struct_mutex);
return 0;
}
@@ -4654,71 +4581,6 @@
return ret;
}
-static int
-i915_gem_init_hws(struct drm_device *dev)
-{
- drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_gem_object *obj;
- struct drm_i915_gem_object *obj_priv;
- int ret;
-
- /* If we need a physical address for the status page, it's already
- * initialized at driver load time.
- */
- if (!I915_NEED_GFX_HWS(dev))
- return 0;
-
- obj = i915_gem_alloc_object(dev, 4096);
- if (obj == NULL) {
- DRM_ERROR("Failed to allocate status page\n");
- ret = -ENOMEM;
- goto err;
- }
- obj_priv = to_intel_bo(obj);
- obj_priv->agp_type = AGP_USER_CACHED_MEMORY;
-
- ret = i915_gem_object_pin(obj, 4096);
- if (ret != 0) {
- drm_gem_object_unreference(obj);
- goto err_unref;
- }
-
- dev_priv->status_gfx_addr = obj_priv->gtt_offset;
-
- dev_priv->hw_status_page = kmap(obj_priv->pages[0]);
- if (dev_priv->hw_status_page == NULL) {
- DRM_ERROR("Failed to map status page.\n");
- memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
- ret = -EINVAL;
- goto err_unpin;
- }
-
- if (HAS_PIPE_CONTROL(dev)) {
- ret = i915_gem_init_pipe_control(dev);
- if (ret)
- goto err_unpin;
- }
-
- dev_priv->hws_obj = obj;
- memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
- if (IS_GEN6(dev)) {
- I915_WRITE(HWS_PGA_GEN6, dev_priv->status_gfx_addr);
- I915_READ(HWS_PGA_GEN6); /* posting read */
- } else {
- I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr);
- I915_READ(HWS_PGA); /* posting read */
- }
- DRM_DEBUG_DRIVER("hws offset: 0x%08x\n", dev_priv->status_gfx_addr);
-
- return 0;
-
-err_unpin:
- i915_gem_object_unpin(obj);
-err_unref:
- drm_gem_object_unreference(obj);
-err:
- return 0;
-}
static void
i915_gem_cleanup_pipe_control(struct drm_device *dev)
@@ -4737,146 +4599,46 @@
dev_priv->seqno_page = NULL;
}
-static void
-i915_gem_cleanup_hws(struct drm_device *dev)
-{
- drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_gem_object *obj;
- struct drm_i915_gem_object *obj_priv;
-
- if (dev_priv->hws_obj == NULL)
- return;
-
- obj = dev_priv->hws_obj;
- obj_priv = to_intel_bo(obj);
-
- kunmap(obj_priv->pages[0]);
- i915_gem_object_unpin(obj);
- drm_gem_object_unreference(obj);
- dev_priv->hws_obj = NULL;
-
- memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
- dev_priv->hw_status_page = NULL;
-
- if (HAS_PIPE_CONTROL(dev))
- i915_gem_cleanup_pipe_control(dev);
-
- /* Write high address into HWS_PGA when disabling. */
- I915_WRITE(HWS_PGA, 0x1ffff000);
-}
-
int
i915_gem_init_ringbuffer(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_gem_object *obj;
- struct drm_i915_gem_object *obj_priv;
- drm_i915_ring_buffer_t *ring = &dev_priv->ring;
int ret;
- u32 head;
- ret = i915_gem_init_hws(dev);
- if (ret != 0)
- return ret;
+ dev_priv->render_ring = render_ring;
- obj = i915_gem_alloc_object(dev, 128 * 1024);
- if (obj == NULL) {
- DRM_ERROR("Failed to allocate ringbuffer\n");
- i915_gem_cleanup_hws(dev);
- return -ENOMEM;
- }
- obj_priv = to_intel_bo(obj);
-
- ret = i915_gem_object_pin(obj, 4096);
- if (ret != 0) {
- drm_gem_object_unreference(obj);
- i915_gem_cleanup_hws(dev);
- return ret;
+ if (!I915_NEED_GFX_HWS(dev)) {
+ dev_priv->render_ring.status_page.page_addr
+ = dev_priv->status_page_dmah->vaddr;
+ memset(dev_priv->render_ring.status_page.page_addr,
+ 0, PAGE_SIZE);
}
- /* Set up the kernel mapping for the ring. */
- ring->Size = obj->size;
-
- ring->map.offset = dev->agp->base + obj_priv->gtt_offset;
- ring->map.size = obj->size;
- ring->map.type = 0;
- ring->map.flags = 0;
- ring->map.mtrr = 0;
-
- drm_core_ioremap_wc(&ring->map, dev);
- if (ring->map.handle == NULL) {
- DRM_ERROR("Failed to map ringbuffer.\n");
- memset(&dev_priv->ring, 0, sizeof(dev_priv->ring));
- i915_gem_object_unpin(obj);
- drm_gem_object_unreference(obj);
- i915_gem_cleanup_hws(dev);
- return -EINVAL;
- }
- ring->ring_obj = obj;
- ring->virtual_start = ring->map.handle;
-
- /* Stop the ring if it's running. */
- I915_WRITE(PRB0_CTL, 0);
- I915_WRITE(PRB0_TAIL, 0);
- I915_WRITE(PRB0_HEAD, 0);
-
- /* Initialize the ring. */
- I915_WRITE(PRB0_START, obj_priv->gtt_offset);
- head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
-
- /* G45 ring initialization fails to reset head to zero */
- if (head != 0) {
- DRM_ERROR("Ring head not reset to zero "
- "ctl %08x head %08x tail %08x start %08x\n",
- I915_READ(PRB0_CTL),
- I915_READ(PRB0_HEAD),
- I915_READ(PRB0_TAIL),
- I915_READ(PRB0_START));
- I915_WRITE(PRB0_HEAD, 0);
-
- DRM_ERROR("Ring head forced to zero "
- "ctl %08x head %08x tail %08x start %08x\n",
- I915_READ(PRB0_CTL),
- I915_READ(PRB0_HEAD),
- I915_READ(PRB0_TAIL),
- I915_READ(PRB0_START));
+ if (HAS_PIPE_CONTROL(dev)) {
+ ret = i915_gem_init_pipe_control(dev);
+ if (ret)
+ return ret;
}
- I915_WRITE(PRB0_CTL,
- ((obj->size - 4096) & RING_NR_PAGES) |
- RING_NO_REPORT |
- RING_VALID);
+ ret = intel_init_ring_buffer(dev, &dev_priv->render_ring);
+ if (ret)
+ goto cleanup_pipe_control;
- head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
-
- /* If the head is still not zero, the ring is dead */
- if (head != 0) {
- DRM_ERROR("Ring initialization failed "
- "ctl %08x head %08x tail %08x start %08x\n",
- I915_READ(PRB0_CTL),
- I915_READ(PRB0_HEAD),
- I915_READ(PRB0_TAIL),
- I915_READ(PRB0_START));
- return -EIO;
- }
-
- /* Update our cache of the ring state */
- if (!drm_core_check_feature(dev, DRIVER_MODESET))
- i915_kernel_lost_context(dev);
- else {
- ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
- ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
- ring->space = ring->head - (ring->tail + 8);
- if (ring->space < 0)
- ring->space += ring->Size;
- }
-
- if (IS_I9XX(dev) && !IS_GEN3(dev)) {
- I915_WRITE(MI_MODE,
- (VS_TIMER_DISPATCH) << 16 | VS_TIMER_DISPATCH);
+ if (HAS_BSD(dev)) {
+ dev_priv->bsd_ring = bsd_ring;
+ ret = intel_init_ring_buffer(dev, &dev_priv->bsd_ring);
+ if (ret)
+ goto cleanup_render_ring;
}
return 0;
+
+cleanup_render_ring:
+ intel_cleanup_ring_buffer(dev, &dev_priv->render_ring);
+cleanup_pipe_control:
+ if (HAS_PIPE_CONTROL(dev))
+ i915_gem_cleanup_pipe_control(dev);
+ return ret;
}
void
@@ -4884,17 +4646,11 @@
{
drm_i915_private_t *dev_priv = dev->dev_private;
- if (dev_priv->ring.ring_obj == NULL)
- return;
-
- drm_core_ioremapfree(&dev_priv->ring.map, dev);
-
- i915_gem_object_unpin(dev_priv->ring.ring_obj);
- drm_gem_object_unreference(dev_priv->ring.ring_obj);
- dev_priv->ring.ring_obj = NULL;
- memset(&dev_priv->ring, 0, sizeof(dev_priv->ring));
-
- i915_gem_cleanup_hws(dev);
+ intel_cleanup_ring_buffer(dev, &dev_priv->render_ring);
+ if (HAS_BSD(dev))
+ intel_cleanup_ring_buffer(dev, &dev_priv->bsd_ring);
+ if (HAS_PIPE_CONTROL(dev))
+ i915_gem_cleanup_pipe_control(dev);
}
int
@@ -4922,12 +4678,14 @@
}
spin_lock(&dev_priv->mm.active_list_lock);
- BUG_ON(!list_empty(&dev_priv->mm.active_list));
+ BUG_ON(!list_empty(&dev_priv->render_ring.active_list));
+ BUG_ON(HAS_BSD(dev) && !list_empty(&dev_priv->bsd_ring.active_list));
spin_unlock(&dev_priv->mm.active_list_lock);
BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
BUG_ON(!list_empty(&dev_priv->mm.inactive_list));
- BUG_ON(!list_empty(&dev_priv->mm.request_list));
+ BUG_ON(!list_empty(&dev_priv->render_ring.request_list));
+ BUG_ON(HAS_BSD(dev) && !list_empty(&dev_priv->bsd_ring.request_list));
mutex_unlock(&dev->struct_mutex);
drm_irq_install(dev);
@@ -4966,22 +4724,34 @@
drm_i915_private_t *dev_priv = dev->dev_private;
spin_lock_init(&dev_priv->mm.active_list_lock);
- INIT_LIST_HEAD(&dev_priv->mm.active_list);
INIT_LIST_HEAD(&dev_priv->mm.flushing_list);
INIT_LIST_HEAD(&dev_priv->mm.gpu_write_list);
INIT_LIST_HEAD(&dev_priv->mm.inactive_list);
- INIT_LIST_HEAD(&dev_priv->mm.request_list);
INIT_LIST_HEAD(&dev_priv->mm.fence_list);
+ INIT_LIST_HEAD(&dev_priv->render_ring.active_list);
+ INIT_LIST_HEAD(&dev_priv->render_ring.request_list);
+ if (HAS_BSD(dev)) {
+ INIT_LIST_HEAD(&dev_priv->bsd_ring.active_list);
+ INIT_LIST_HEAD(&dev_priv->bsd_ring.request_list);
+ }
for (i = 0; i < 16; i++)
INIT_LIST_HEAD(&dev_priv->fence_regs[i].lru_list);
INIT_DELAYED_WORK(&dev_priv->mm.retire_work,
i915_gem_retire_work_handler);
- dev_priv->mm.next_gem_seqno = 1;
-
spin_lock(&shrink_list_lock);
list_add(&dev_priv->mm.shrink_list, &shrink_list);
spin_unlock(&shrink_list_lock);
+ /* On GEN3 we really need to make sure the ARB C3 LP bit is set */
+ if (IS_GEN3(dev)) {
+ u32 tmp = I915_READ(MI_ARB_STATE);
+ if (!(tmp & MI_ARB_C3_LP_WRITE_ENABLE)) {
+ /* arb state is a masked write, so set bit + bit in mask */
+ tmp = MI_ARB_C3_LP_WRITE_ENABLE | (MI_ARB_C3_LP_WRITE_ENABLE << MI_ARB_MASK_SHIFT);
+ I915_WRITE(MI_ARB_STATE, tmp);
+ }
+ }
+
/* Old X drivers will take 0-2 for front, back, depth buffers */
if (!drm_core_check_feature(dev, DRIVER_MODESET))
dev_priv->fence_reg_start = 3;
@@ -5209,14 +4979,16 @@
spin_lock(&dev_priv->mm.active_list_lock);
lists_empty = list_empty(&dev_priv->mm.flushing_list) &&
- list_empty(&dev_priv->mm.active_list);
+ list_empty(&dev_priv->render_ring.active_list);
+ if (HAS_BSD(dev))
+ lists_empty &= list_empty(&dev_priv->bsd_ring.active_list);
spin_unlock(&dev_priv->mm.active_list_lock);
return !lists_empty;
}
static int
-i915_gem_shrink(int nr_to_scan, gfp_t gfp_mask)
+i915_gem_shrink(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
{
drm_i915_private_t *dev_priv, *next_dev;
struct drm_i915_gem_object *obj_priv, *next_obj;
@@ -5254,8 +5026,10 @@
continue;
spin_unlock(&shrink_list_lock);
+ i915_gem_retire_requests(dev, &dev_priv->render_ring);
- i915_gem_retire_requests(dev);
+ if (HAS_BSD(dev))
+ i915_gem_retire_requests(dev, &dev_priv->bsd_ring);
list_for_each_entry_safe(obj_priv, next_obj,
&dev_priv->mm.inactive_list,
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 8c3f080..dba53d4 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -53,7 +53,7 @@
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
/** Interrupts that we mask and unmask at runtime. */
-#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT)
+#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT | I915_BSD_USER_INTERRUPT)
#define I915_PIPE_VBLANK_STATUS (PIPE_START_VBLANK_INTERRUPT_STATUS |\
PIPE_VBLANK_INTERRUPT_STATUS)
@@ -74,7 +74,7 @@
}
}
-static inline void
+void
ironlake_disable_graphics_irq(drm_i915_private_t *dev_priv, u32 mask)
{
if ((dev_priv->gt_irq_mask_reg & mask) != mask) {
@@ -115,7 +115,7 @@
}
}
-static inline void
+void
i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask)
{
if ((dev_priv->irq_mask_reg & mask) != mask) {
@@ -278,10 +278,9 @@
{
drm_i915_private_t *dev_priv = dev->dev_private;
u32 busy_up, busy_down, max_avg, min_avg;
- u16 rgvswctl;
u8 new_delay = dev_priv->cur_delay;
- I915_WRITE(MEMINTRSTS, I915_READ(MEMINTRSTS) & ~MEMINT_EVAL_CHG);
+ I915_WRITE16(MEMINTRSTS, MEMINT_EVAL_CHG);
busy_up = I915_READ(RCPREVBSYTUPAVG);
busy_down = I915_READ(RCPREVBSYTDNAVG);
max_avg = I915_READ(RCBMAXAVG);
@@ -300,27 +299,8 @@
new_delay = dev_priv->min_delay;
}
- DRM_DEBUG("rps change requested: %d -> %d\n",
- dev_priv->cur_delay, new_delay);
-
- rgvswctl = I915_READ(MEMSWCTL);
- if (rgvswctl & MEMCTL_CMD_STS) {
- DRM_ERROR("gpu busy, RCS change rejected\n");
- return; /* still busy with another command */
- }
-
- /* Program the new state */
- rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
- (new_delay << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
- I915_WRITE(MEMSWCTL, rgvswctl);
- POSTING_READ(MEMSWCTL);
-
- rgvswctl |= MEMCTL_CMD_STS;
- I915_WRITE(MEMSWCTL, rgvswctl);
-
- dev_priv->cur_delay = new_delay;
-
- DRM_DEBUG("rps changed\n");
+ if (ironlake_set_drps(dev, new_delay))
+ dev_priv->cur_delay = new_delay;
return;
}
@@ -331,6 +311,7 @@
int ret = IRQ_NONE;
u32 de_iir, gt_iir, de_ier, pch_iir;
struct drm_i915_master_private *master_priv;
+ struct intel_ring_buffer *render_ring = &dev_priv->render_ring;
/* disable master interrupt before clearing iir */
de_ier = I915_READ(DEIER);
@@ -354,13 +335,16 @@
}
if (gt_iir & GT_PIPE_NOTIFY) {
- u32 seqno = i915_get_gem_seqno(dev);
- dev_priv->mm.irq_gem_seqno = seqno;
+ u32 seqno = render_ring->get_gem_seqno(dev, render_ring);
+ render_ring->irq_gem_seqno = seqno;
trace_i915_gem_request_complete(dev, seqno);
- DRM_WAKEUP(&dev_priv->irq_queue);
+ DRM_WAKEUP(&dev_priv->render_ring.irq_queue);
dev_priv->hangcheck_count = 0;
mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
}
+ if (gt_iir & GT_BSD_USER_INTERRUPT)
+ DRM_WAKEUP(&dev_priv->bsd_ring.irq_queue);
+
if (de_iir & DE_GSE)
ironlake_opregion_gse_intr(dev);
@@ -388,7 +372,7 @@
}
if (de_iir & DE_PCU_EVENT) {
- I915_WRITE(MEMINTRSTS, I915_READ(MEMINTRSTS));
+ I915_WRITE16(MEMINTRSTS, I915_READ(MEMINTRSTS));
i915_handle_rps_change(dev);
}
@@ -536,17 +520,18 @@
*/
bbaddr = 0;
head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
- ring = (u32 *)(dev_priv->ring.virtual_start + head);
+ ring = (u32 *)(dev_priv->render_ring.virtual_start + head);
- while (--ring >= (u32 *)dev_priv->ring.virtual_start) {
+ while (--ring >= (u32 *)dev_priv->render_ring.virtual_start) {
bbaddr = i915_get_bbaddr(dev, ring);
if (bbaddr)
break;
}
if (bbaddr == 0) {
- ring = (u32 *)(dev_priv->ring.virtual_start + dev_priv->ring.Size);
- while (--ring >= (u32 *)dev_priv->ring.virtual_start) {
+ ring = (u32 *)(dev_priv->render_ring.virtual_start
+ + dev_priv->render_ring.size);
+ while (--ring >= (u32 *)dev_priv->render_ring.virtual_start) {
bbaddr = i915_get_bbaddr(dev, ring);
if (bbaddr)
break;
@@ -587,7 +572,7 @@
return;
}
- error->seqno = i915_get_gem_seqno(dev);
+ error->seqno = i915_get_gem_seqno(dev, &dev_priv->render_ring);
error->eir = I915_READ(EIR);
error->pgtbl_er = I915_READ(PGTBL_ER);
error->pipeastat = I915_READ(PIPEASTAT);
@@ -615,7 +600,9 @@
batchbuffer[0] = NULL;
batchbuffer[1] = NULL;
count = 0;
- list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
+ list_for_each_entry(obj_priv,
+ &dev_priv->render_ring.active_list, list) {
+
struct drm_gem_object *obj = &obj_priv->base;
if (batchbuffer[0] == NULL &&
@@ -639,7 +626,8 @@
error->batchbuffer[1] = i915_error_object_create(dev, batchbuffer[1]);
/* Record the ringbuffer */
- error->ringbuffer = i915_error_object_create(dev, dev_priv->ring.ring_obj);
+ error->ringbuffer = i915_error_object_create(dev,
+ dev_priv->render_ring.gem_object);
/* Record buffers on the active list. */
error->active_bo = NULL;
@@ -651,7 +639,8 @@
if (error->active_bo) {
int i = 0;
- list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
+ list_for_each_entry(obj_priv,
+ &dev_priv->render_ring.active_list, list) {
struct drm_gem_object *obj = &obj_priv->base;
error->active_bo[i].size = obj->size;
@@ -703,24 +692,13 @@
i915_error_state_free(dev, error);
}
-/**
- * i915_handle_error - handle an error interrupt
- * @dev: drm device
- *
- * Do some basic checking of regsiter state at error interrupt time and
- * dump it to the syslog. Also call i915_capture_error_state() to make
- * sure we get a record and make it available in debugfs. Fire a uevent
- * so userspace knows something bad happened (should trigger collection
- * of a ring dump etc.).
- */
-static void i915_handle_error(struct drm_device *dev, bool wedged)
+static void i915_report_and_clear_eir(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 eir = I915_READ(EIR);
- u32 pipea_stats = I915_READ(PIPEASTAT);
- u32 pipeb_stats = I915_READ(PIPEBSTAT);
- i915_capture_error_state(dev);
+ if (!eir)
+ return;
printk(KERN_ERR "render error detected, EIR: 0x%08x\n",
eir);
@@ -766,6 +744,9 @@
}
if (eir & I915_ERROR_MEMORY_REFRESH) {
+ u32 pipea_stats = I915_READ(PIPEASTAT);
+ u32 pipeb_stats = I915_READ(PIPEBSTAT);
+
printk(KERN_ERR "memory refresh error\n");
printk(KERN_ERR "PIPEASTAT: 0x%08x\n",
pipea_stats);
@@ -822,6 +803,24 @@
I915_WRITE(EMR, I915_READ(EMR) | eir);
I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
}
+}
+
+/**
+ * i915_handle_error - handle an error interrupt
+ * @dev: drm device
+ *
+ * Do some basic checking of regsiter state at error interrupt time and
+ * dump it to the syslog. Also call i915_capture_error_state() to make
+ * sure we get a record and make it available in debugfs. Fire a uevent
+ * so userspace knows something bad happened (should trigger collection
+ * of a ring dump etc.).
+ */
+static void i915_handle_error(struct drm_device *dev, bool wedged)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ i915_capture_error_state(dev);
+ i915_report_and_clear_eir(dev);
if (wedged) {
atomic_set(&dev_priv->mm.wedged, 1);
@@ -829,7 +828,7 @@
/*
* Wakeup waiting processes so they don't hang
*/
- DRM_WAKEUP(&dev_priv->irq_queue);
+ DRM_WAKEUP(&dev_priv->render_ring.irq_queue);
}
queue_work(dev_priv->wq, &dev_priv->error_work);
@@ -848,6 +847,7 @@
unsigned long irqflags;
int irq_received;
int ret = IRQ_NONE;
+ struct intel_ring_buffer *render_ring = &dev_priv->render_ring;
atomic_inc(&dev_priv->irq_received);
@@ -928,30 +928,42 @@
}
if (iir & I915_USER_INTERRUPT) {
- u32 seqno = i915_get_gem_seqno(dev);
- dev_priv->mm.irq_gem_seqno = seqno;
+ u32 seqno =
+ render_ring->get_gem_seqno(dev, render_ring);
+ render_ring->irq_gem_seqno = seqno;
trace_i915_gem_request_complete(dev, seqno);
- DRM_WAKEUP(&dev_priv->irq_queue);
+ DRM_WAKEUP(&dev_priv->render_ring.irq_queue);
dev_priv->hangcheck_count = 0;
mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
}
- if (iir & I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT)
- intel_prepare_page_flip(dev, 0);
+ if (HAS_BSD(dev) && (iir & I915_BSD_USER_INTERRUPT))
+ DRM_WAKEUP(&dev_priv->bsd_ring.irq_queue);
- if (iir & I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT)
+ if (iir & I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT) {
+ intel_prepare_page_flip(dev, 0);
+ if (dev_priv->flip_pending_is_done)
+ intel_finish_page_flip_plane(dev, 0);
+ }
+
+ if (iir & I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT) {
intel_prepare_page_flip(dev, 1);
+ if (dev_priv->flip_pending_is_done)
+ intel_finish_page_flip_plane(dev, 1);
+ }
if (pipea_stats & vblank_status) {
vblank++;
drm_handle_vblank(dev, 0);
- intel_finish_page_flip(dev, 0);
+ if (!dev_priv->flip_pending_is_done)
+ intel_finish_page_flip(dev, 0);
}
if (pipeb_stats & vblank_status) {
vblank++;
drm_handle_vblank(dev, 1);
- intel_finish_page_flip(dev, 1);
+ if (!dev_priv->flip_pending_is_done)
+ intel_finish_page_flip(dev, 1);
}
if ((pipea_stats & I915_LEGACY_BLC_EVENT_STATUS) ||
@@ -984,7 +996,6 @@
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
- RING_LOCALS;
i915_kernel_lost_context(dev);
@@ -1006,43 +1017,13 @@
return dev_priv->counter;
}
-void i915_user_irq_get(struct drm_device *dev)
-{
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- unsigned long irqflags;
-
- spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
- if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1)) {
- if (HAS_PCH_SPLIT(dev))
- ironlake_enable_graphics_irq(dev_priv, GT_PIPE_NOTIFY);
- else
- i915_enable_irq(dev_priv, I915_USER_INTERRUPT);
- }
- spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
-}
-
-void i915_user_irq_put(struct drm_device *dev)
-{
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- unsigned long irqflags;
-
- spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
- BUG_ON(dev->irq_enabled && dev_priv->user_irq_refcount <= 0);
- if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0)) {
- if (HAS_PCH_SPLIT(dev))
- ironlake_disable_graphics_irq(dev_priv, GT_PIPE_NOTIFY);
- else
- i915_disable_irq(dev_priv, I915_USER_INTERRUPT);
- }
- spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
-}
-
void i915_trace_irq_get(struct drm_device *dev, u32 seqno)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ struct intel_ring_buffer *render_ring = &dev_priv->render_ring;
if (dev_priv->trace_irq_seqno == 0)
- i915_user_irq_get(dev);
+ render_ring->user_irq_get(dev, render_ring);
dev_priv->trace_irq_seqno = seqno;
}
@@ -1052,6 +1033,7 @@
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
int ret = 0;
+ struct intel_ring_buffer *render_ring = &dev_priv->render_ring;
DRM_DEBUG_DRIVER("irq_nr=%d breadcrumb=%d\n", irq_nr,
READ_BREADCRUMB(dev_priv));
@@ -1065,10 +1047,10 @@
if (master_priv->sarea_priv)
master_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT;
- i915_user_irq_get(dev);
- DRM_WAIT_ON(ret, dev_priv->irq_queue, 3 * DRM_HZ,
+ render_ring->user_irq_get(dev, render_ring);
+ DRM_WAIT_ON(ret, dev_priv->render_ring.irq_queue, 3 * DRM_HZ,
READ_BREADCRUMB(dev_priv) >= irq_nr);
- i915_user_irq_put(dev);
+ render_ring->user_irq_put(dev, render_ring);
if (ret == -EBUSY) {
DRM_ERROR("EBUSY -- rec: %d emitted: %d\n",
@@ -1087,7 +1069,7 @@
drm_i915_irq_emit_t *emit = data;
int result;
- if (!dev_priv || !dev_priv->ring.virtual_start) {
+ if (!dev_priv || !dev_priv->render_ring.virtual_start) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
@@ -1233,9 +1215,12 @@
return -EINVAL;
}
-struct drm_i915_gem_request *i915_get_tail_request(struct drm_device *dev) {
+struct drm_i915_gem_request *
+i915_get_tail_request(struct drm_device *dev)
+{
drm_i915_private_t *dev_priv = dev->dev_private;
- return list_entry(dev_priv->mm.request_list.prev, struct drm_i915_gem_request, list);
+ return list_entry(dev_priv->render_ring.request_list.prev,
+ struct drm_i915_gem_request, list);
}
/**
@@ -1260,8 +1245,10 @@
acthd = I915_READ(ACTHD_I965);
/* If all work is done then ACTHD clearly hasn't advanced. */
- if (list_empty(&dev_priv->mm.request_list) ||
- i915_seqno_passed(i915_get_gem_seqno(dev), i915_get_tail_request(dev)->seqno)) {
+ if (list_empty(&dev_priv->render_ring.request_list) ||
+ i915_seqno_passed(i915_get_gem_seqno(dev,
+ &dev_priv->render_ring),
+ i915_get_tail_request(dev)->seqno)) {
dev_priv->hangcheck_count = 0;
return;
}
@@ -1314,7 +1301,7 @@
/* enable kind of interrupts always enabled */
u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT |
DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE;
- u32 render_mask = GT_PIPE_NOTIFY;
+ u32 render_mask = GT_PIPE_NOTIFY | GT_BSD_USER_INTERRUPT;
u32 hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG |
SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG;
@@ -1328,7 +1315,7 @@
(void) I915_READ(DEIER);
/* user interrupt should be enabled, but masked initial */
- dev_priv->gt_irq_mask_reg = 0xffffffff;
+ dev_priv->gt_irq_mask_reg = ~render_mask;
dev_priv->gt_irq_enable_reg = render_mask;
I915_WRITE(GTIIR, I915_READ(GTIIR));
@@ -1391,7 +1378,10 @@
u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR;
u32 error_mask;
- DRM_INIT_WAITQUEUE(&dev_priv->irq_queue);
+ DRM_INIT_WAITQUEUE(&dev_priv->render_ring.irq_queue);
+
+ if (HAS_BSD(dev))
+ DRM_INIT_WAITQUEUE(&dev_priv->bsd_ring.irq_queue);
dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
@@ -1405,29 +1395,10 @@
dev_priv->pipestat[1] = 0;
if (I915_HAS_HOTPLUG(dev)) {
- u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
-
- /* Note HDMI and DP share bits */
- if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
- hotplug_en |= HDMIB_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
- hotplug_en |= HDMIC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
- hotplug_en |= HDMID_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
- hotplug_en |= SDVOC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
- hotplug_en |= SDVOB_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS)
- hotplug_en |= CRT_HOTPLUG_INT_EN;
- /* Ignore TV since it's buggy */
-
- I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
-
/* Enable in IER... */
enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
/* and unmask in IMR */
- i915_enable_irq(dev_priv, I915_DISPLAY_PORT_INTERRUPT);
+ dev_priv->irq_mask_reg &= ~I915_DISPLAY_PORT_INTERRUPT;
}
/*
@@ -1445,16 +1416,41 @@
}
I915_WRITE(EMR, error_mask);
- /* Disable pipe interrupt enables, clear pending pipe status */
- I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
- I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
- /* Clear pending interrupt status */
- I915_WRITE(IIR, I915_READ(IIR));
-
- I915_WRITE(IER, enable_mask);
I915_WRITE(IMR, dev_priv->irq_mask_reg);
+ I915_WRITE(IER, enable_mask);
(void) I915_READ(IER);
+ if (I915_HAS_HOTPLUG(dev)) {
+ u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+
+ /* Note HDMI and DP share bits */
+ if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMIB_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMIC_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMID_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
+ hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
+ hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
+ hotplug_en |= CRT_HOTPLUG_INT_EN;
+
+ /* Programming the CRT detection parameters tends
+ to generate a spurious hotplug event about three
+ seconds later. So just do it once.
+ */
+ if (IS_G4X(dev))
+ hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
+ hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
+ }
+
+ /* Ignore TV since it's buggy */
+
+ I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+ }
+
opregion_enable_asle(dev);
return 0;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f3e39cc..6d9b028 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -178,6 +178,7 @@
#define MI_OVERLAY_OFF (0x2<<21)
#define MI_LOAD_SCAN_LINES_INCL MI_INSTR(0x12, 0)
#define MI_DISPLAY_FLIP MI_INSTR(0x14, 2)
+#define MI_DISPLAY_FLIP_I915 MI_INSTR(0x14, 1)
#define MI_DISPLAY_FLIP_PLANE(n) ((n) << 20)
#define MI_STORE_DWORD_IMM MI_INSTR(0x20, 1)
#define MI_MEM_VIRTUAL (1 << 22) /* 965+ only */
@@ -334,6 +335,7 @@
#define I915_DEBUG_INTERRUPT (1<<2)
#define I915_USER_INTERRUPT (1<<1)
#define I915_ASLE_INTERRUPT (1<<0)
+#define I915_BSD_USER_INTERRUPT (1<<25)
#define EIR 0x020b0
#define EMR 0x020b4
#define ESR 0x020b8
@@ -357,6 +359,70 @@
#define LM_BURST_LENGTH 0x00000700
#define LM_FIFO_WATERMARK 0x0000001F
#define MI_ARB_STATE 0x020e4 /* 915+ only */
+#define MI_ARB_MASK_SHIFT 16 /* shift for enable bits */
+
+/* Make render/texture TLB fetches lower priorty than associated data
+ * fetches. This is not turned on by default
+ */
+#define MI_ARB_RENDER_TLB_LOW_PRIORITY (1 << 15)
+
+/* Isoch request wait on GTT enable (Display A/B/C streams).
+ * Make isoch requests stall on the TLB update. May cause
+ * display underruns (test mode only)
+ */
+#define MI_ARB_ISOCH_WAIT_GTT (1 << 14)
+
+/* Block grant count for isoch requests when block count is
+ * set to a finite value.
+ */
+#define MI_ARB_BLOCK_GRANT_MASK (3 << 12)
+#define MI_ARB_BLOCK_GRANT_8 (0 << 12) /* for 3 display planes */
+#define MI_ARB_BLOCK_GRANT_4 (1 << 12) /* for 2 display planes */
+#define MI_ARB_BLOCK_GRANT_2 (2 << 12) /* for 1 display plane */
+#define MI_ARB_BLOCK_GRANT_0 (3 << 12) /* don't use */
+
+/* Enable render writes to complete in C2/C3/C4 power states.
+ * If this isn't enabled, render writes are prevented in low
+ * power states. That seems bad to me.
+ */
+#define MI_ARB_C3_LP_WRITE_ENABLE (1 << 11)
+
+/* This acknowledges an async flip immediately instead
+ * of waiting for 2TLB fetches.
+ */
+#define MI_ARB_ASYNC_FLIP_ACK_IMMEDIATE (1 << 10)
+
+/* Enables non-sequential data reads through arbiter
+ */
+#define MI_ARB_DUAL_DATA_PHASE_DISABLE (1 << 9)
+
+/* Disable FSB snooping of cacheable write cycles from binner/render
+ * command stream
+ */
+#define MI_ARB_CACHE_SNOOP_DISABLE (1 << 8)
+
+/* Arbiter time slice for non-isoch streams */
+#define MI_ARB_TIME_SLICE_MASK (7 << 5)
+#define MI_ARB_TIME_SLICE_1 (0 << 5)
+#define MI_ARB_TIME_SLICE_2 (1 << 5)
+#define MI_ARB_TIME_SLICE_4 (2 << 5)
+#define MI_ARB_TIME_SLICE_6 (3 << 5)
+#define MI_ARB_TIME_SLICE_8 (4 << 5)
+#define MI_ARB_TIME_SLICE_10 (5 << 5)
+#define MI_ARB_TIME_SLICE_14 (6 << 5)
+#define MI_ARB_TIME_SLICE_16 (7 << 5)
+
+/* Low priority grace period page size */
+#define MI_ARB_LOW_PRIORITY_GRACE_4KB (0 << 4) /* default */
+#define MI_ARB_LOW_PRIORITY_GRACE_8KB (1 << 4)
+
+/* Disable display A/B trickle feed */
+#define MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE (1 << 2)
+
+/* Set display plane priority */
+#define MI_ARB_DISPLAY_PRIORITY_A_B (0 << 0) /* display A > display B */
+#define MI_ARB_DISPLAY_PRIORITY_B_A (1 << 0) /* display B > display A */
+
#define CACHE_MODE_0 0x02120 /* 915+ only */
#define CM0_MASK_SHIFT 16
#define CM0_IZ_OPT_DISABLE (1<<6)
@@ -367,7 +433,40 @@
#define CM0_RC_OP_FLUSH_DISABLE (1<<0)
#define BB_ADDR 0x02140 /* 8 bytes */
#define GFX_FLSH_CNTL 0x02170 /* 915+ only */
+#define ECOSKPD 0x021d0
+#define ECO_GATING_CX_ONLY (1<<3)
+#define ECO_FLIP_DONE (1<<0)
+/* GEN6 interrupt control */
+#define GEN6_RENDER_HWSTAM 0x2098
+#define GEN6_RENDER_IMR 0x20a8
+#define GEN6_RENDER_CONTEXT_SWITCH_INTERRUPT (1 << 8)
+#define GEN6_RENDER_PPGTT_PAGE_FAULT (1 << 7)
+#define GEN6_RENDER TIMEOUT_COUNTER_EXPIRED (1 << 6)
+#define GEN6_RENDER_L3_PARITY_ERROR (1 << 5)
+#define GEN6_RENDER_PIPE_CONTROL_NOTIFY_INTERRUPT (1 << 4)
+#define GEN6_RENDER_COMMAND_PARSER_MASTER_ERROR (1 << 3)
+#define GEN6_RENDER_SYNC_STATUS (1 << 2)
+#define GEN6_RENDER_DEBUG_INTERRUPT (1 << 1)
+#define GEN6_RENDER_USER_INTERRUPT (1 << 0)
+
+#define GEN6_BLITTER_HWSTAM 0x22098
+#define GEN6_BLITTER_IMR 0x220a8
+#define GEN6_BLITTER_MI_FLUSH_DW_NOTIFY_INTERRUPT (1 << 26)
+#define GEN6_BLITTER_COMMAND_PARSER_MASTER_ERROR (1 << 25)
+#define GEN6_BLITTER_SYNC_STATUS (1 << 24)
+#define GEN6_BLITTER_USER_INTERRUPT (1 << 22)
+/*
+ * BSD (bit stream decoder instruction and interrupt control register defines
+ * (G4X and Ironlake only)
+ */
+
+#define BSD_RING_TAIL 0x04030
+#define BSD_RING_HEAD 0x04034
+#define BSD_RING_START 0x04038
+#define BSD_RING_CTL 0x0403c
+#define BSD_RING_ACTHD 0x04074
+#define BSD_HWS_PGA 0x04080
/*
* Framebuffer compression (915+ only)
@@ -805,6 +904,10 @@
#define DCC_CHANNEL_XOR_DISABLE (1 << 10)
#define DCC_CHANNEL_XOR_BIT_17 (1 << 9)
+/** Pineview MCH register contains DDR3 setting */
+#define CSHRDDR3CTL 0x101a8
+#define CSHRDDR3CTL_DDR3 (1 << 2)
+
/** 965 MCH register controlling DRAM channel configuration */
#define C0DRB3 0x10206
#define C1DRB3 0x10606
@@ -826,6 +929,12 @@
#define CLKCFG_MEM_800 (3 << 4)
#define CLKCFG_MEM_MASK (7 << 4)
+#define TR1 0x11006
+#define TSFS 0x11020
+#define TSFS_SLOPE_MASK 0x0000ff00
+#define TSFS_SLOPE_SHIFT 8
+#define TSFS_INTR_MASK 0x000000ff
+
#define CRSTANDVID 0x11100
#define PXVFREQ_BASE 0x11110 /* P[0-15]VIDFREQ (0x1114c) (Ironlake) */
#define PXVFREQ_PX_MASK 0x7f000000
@@ -964,6 +1073,41 @@
#define MEMSTAT_SRC_CTL_STDBY 3
#define RCPREVBSYTUPAVG 0x113b8
#define RCPREVBSYTDNAVG 0x113bc
+#define SDEW 0x1124c
+#define CSIEW0 0x11250
+#define CSIEW1 0x11254
+#define CSIEW2 0x11258
+#define PEW 0x1125c
+#define DEW 0x11270
+#define MCHAFE 0x112c0
+#define CSIEC 0x112e0
+#define DMIEC 0x112e4
+#define DDREC 0x112e8
+#define PEG0EC 0x112ec
+#define PEG1EC 0x112f0
+#define GFXEC 0x112f4
+#define RPPREVBSYTUPAVG 0x113b8
+#define RPPREVBSYTDNAVG 0x113bc
+#define ECR 0x11600
+#define ECR_GPFE (1<<31)
+#define ECR_IMONE (1<<30)
+#define ECR_CAP_MASK 0x0000001f /* Event range, 0-31 */
+#define OGW0 0x11608
+#define OGW1 0x1160c
+#define EG0 0x11610
+#define EG1 0x11614
+#define EG2 0x11618
+#define EG3 0x1161c
+#define EG4 0x11620
+#define EG5 0x11624
+#define EG6 0x11628
+#define EG7 0x1162c
+#define PXW 0x11664
+#define PXWL 0x11680
+#define LCFUSE02 0x116c0
+#define LCFUSE_HIV_MASK 0x000000ff
+#define CSIPLL0 0x12c10
+#define DDRMPLL1 0X12c20
#define PEG_BAND_GAP_DATA 0x14d68
/*
@@ -1054,8 +1198,6 @@
#define CRT_HOTPLUG_DETECT_DELAY_2G (1 << 4)
#define CRT_HOTPLUG_DETECT_VOLTAGE_325MV (0 << 2)
#define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2)
-#define CRT_HOTPLUG_MASK (0x3fc) /* Bits 9-2 */
-#define CRT_FORCE_HOTPLUG_MASK 0xfffffe1f
#define PORT_HOTPLUG_STAT 0x61114
#define HDMIB_HOTPLUG_INT_STATUS (1 << 29)
@@ -2355,6 +2497,8 @@
#define GT_PIPE_NOTIFY (1 << 4)
#define GT_SYNC_STATUS (1 << 2)
#define GT_USER_INTERRUPT (1 << 0)
+#define GT_BSD_USER_INTERRUPT (1 << 5)
+
#define GTISR 0x44010
#define GTIMR 0x44014
@@ -2690,6 +2834,9 @@
#define SDVO_ENCODING (0)
#define TMDS_ENCODING (2 << 10)
#define NULL_PACKET_VSYNC_ENABLE (1 << 9)
+/* CPT */
+#define HDMI_MODE_SELECT (1 << 9)
+#define DVI_MODE_SELECT (0)
#define SDVOB_BORDER_ENABLE (1 << 7)
#define AUDIO_ENABLE (1 << 6)
#define VSYNC_ACTIVE_HIGH (1 << 4)
diff --git a/drivers/gpu/drm/i915/i915_trace.h b/drivers/gpu/drm/i915/i915_trace.h
index 9e4c45f..fab2176 100644
--- a/drivers/gpu/drm/i915/i915_trace.h
+++ b/drivers/gpu/drm/i915/i915_trace.h
@@ -53,23 +53,6 @@
__entry->obj, __entry->gtt_offset)
);
-TRACE_EVENT(i915_gem_object_clflush,
-
- TP_PROTO(struct drm_gem_object *obj),
-
- TP_ARGS(obj),
-
- TP_STRUCT__entry(
- __field(struct drm_gem_object *, obj)
- ),
-
- TP_fast_assign(
- __entry->obj = obj;
- ),
-
- TP_printk("obj=%p", __entry->obj)
-);
-
TRACE_EVENT(i915_gem_object_change_domain,
TP_PROTO(struct drm_gem_object *obj, uint32_t old_read_domains, uint32_t old_write_domain),
@@ -132,6 +115,13 @@
TP_printk("obj=%p", __entry->obj)
);
+DEFINE_EVENT(i915_gem_object, i915_gem_object_clflush,
+
+ TP_PROTO(struct drm_gem_object *obj),
+
+ TP_ARGS(obj)
+);
+
DEFINE_EVENT(i915_gem_object, i915_gem_object_unbind,
TP_PROTO(struct drm_gem_object *obj),
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 4c748d8..96f75d7 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -95,6 +95,16 @@
panel_fixed_mode->clock = dvo_timing->clock * 10;
panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
+ if (dvo_timing->hsync_positive)
+ panel_fixed_mode->flags |= DRM_MODE_FLAG_PHSYNC;
+ else
+ panel_fixed_mode->flags |= DRM_MODE_FLAG_NHSYNC;
+
+ if (dvo_timing->vsync_positive)
+ panel_fixed_mode->flags |= DRM_MODE_FLAG_PVSYNC;
+ else
+ panel_fixed_mode->flags |= DRM_MODE_FLAG_NVSYNC;
+
/* Some VBTs have bogus h/vtotal values */
if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index e16ac5a..ee0732b 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -217,7 +217,8 @@
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 hotplug_en;
+ u32 hotplug_en, orig, stat;
+ bool ret = false;
int i, tries = 0;
if (HAS_PCH_SPLIT(dev))
@@ -232,15 +233,9 @@
tries = 2;
else
tries = 1;
- hotplug_en = I915_READ(PORT_HOTPLUG_EN);
- hotplug_en &= CRT_FORCE_HOTPLUG_MASK;
+ hotplug_en = orig = I915_READ(PORT_HOTPLUG_EN);
hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
- if (IS_G4X(dev))
- hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
-
- hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
-
for (i = 0; i < tries ; i++) {
unsigned long timeout;
/* turn on the FORCE_DETECT */
@@ -255,11 +250,17 @@
} while (time_after(timeout, jiffies));
}
- if ((I915_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) !=
- CRT_HOTPLUG_MONITOR_NONE)
- return true;
+ stat = I915_READ(PORT_HOTPLUG_STAT);
+ if ((stat & CRT_HOTPLUG_MONITOR_MASK) != CRT_HOTPLUG_MONITOR_NONE)
+ ret = true;
- return false;
+ /* clear the interrupt we just generated, if any */
+ I915_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);
+
+ /* and put the bits back */
+ I915_WRITE(PORT_HOTPLUG_EN, orig);
+
+ return ret;
}
static bool intel_crt_detect_ddc(struct drm_encoder *encoder)
@@ -569,7 +570,7 @@
(1 << INTEL_ANALOG_CLONE_BIT) |
(1 << INTEL_SDVO_LVDS_CLONE_BIT);
intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
- connector->interlace_allowed = 0;
+ connector->interlace_allowed = 1;
connector->doublescan_allowed = 0;
drm_encoder_helper_add(&intel_encoder->enc, &intel_crt_helper_funcs);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f469a84..68dcf36 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1029,19 +1029,28 @@
void i8xx_disable_fbc(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ unsigned long timeout = jiffies + msecs_to_jiffies(1);
u32 fbc_ctl;
if (!I915_HAS_FBC(dev))
return;
+ if (!(I915_READ(FBC_CONTROL) & FBC_CTL_EN))
+ return; /* Already off, just return */
+
/* Disable compression */
fbc_ctl = I915_READ(FBC_CONTROL);
fbc_ctl &= ~FBC_CTL_EN;
I915_WRITE(FBC_CONTROL, fbc_ctl);
/* Wait for compressing bit to clear */
- while (I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING)
- ; /* nothing */
+ while (I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) {
+ if (time_after(jiffies, timeout)) {
+ DRM_DEBUG_DRIVER("FBC idle timed out\n");
+ break;
+ }
+ ; /* do nothing */
+ }
intel_wait_for_vblank(dev);
@@ -1239,10 +1248,11 @@
return;
out_disable:
- DRM_DEBUG_KMS("unsupported config, disabling FBC\n");
/* Multiple disables should be harmless */
- if (intel_fbc_enabled(dev))
+ if (intel_fbc_enabled(dev)) {
+ DRM_DEBUG_KMS("unsupported config, disabling FBC\n");
intel_disable_fbc(dev);
+ }
}
static int
@@ -1386,7 +1396,8 @@
Start = obj_priv->gtt_offset;
Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
- DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y);
+ DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
+ Start, Offset, x, y, crtc->fb->pitch);
I915_WRITE(dspstride, crtc->fb->pitch);
if (IS_I965G(dev)) {
I915_WRITE(dspbase, Offset);
@@ -2345,6 +2356,8 @@
if (mode->clock * 3 > 27000 * 4)
return MODE_CLOCK_HIGH;
}
+
+ drm_mode_set_crtcinfo(adjusted_mode, 0);
return true;
}
@@ -2629,6 +2642,7 @@
struct cxsr_latency {
int is_desktop;
+ int is_ddr3;
unsigned long fsb_freq;
unsigned long mem_freq;
unsigned long display_sr;
@@ -2638,33 +2652,45 @@
};
static struct cxsr_latency cxsr_latency_table[] = {
- {1, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */
- {1, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */
- {1, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */
+ {1, 0, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */
+ {1, 0, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */
+ {1, 0, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */
+ {1, 1, 800, 667, 6420, 36420, 6873, 36873}, /* DDR3-667 SC */
+ {1, 1, 800, 800, 5902, 35902, 6318, 36318}, /* DDR3-800 SC */
- {1, 667, 400, 3400, 33400, 4021, 34021}, /* DDR2-400 SC */
- {1, 667, 667, 3372, 33372, 3845, 33845}, /* DDR2-667 SC */
- {1, 667, 800, 3386, 33386, 3822, 33822}, /* DDR2-800 SC */
+ {1, 0, 667, 400, 3400, 33400, 4021, 34021}, /* DDR2-400 SC */
+ {1, 0, 667, 667, 3372, 33372, 3845, 33845}, /* DDR2-667 SC */
+ {1, 0, 667, 800, 3386, 33386, 3822, 33822}, /* DDR2-800 SC */
+ {1, 1, 667, 667, 6438, 36438, 6911, 36911}, /* DDR3-667 SC */
+ {1, 1, 667, 800, 5941, 35941, 6377, 36377}, /* DDR3-800 SC */
- {1, 400, 400, 3472, 33472, 4173, 34173}, /* DDR2-400 SC */
- {1, 400, 667, 3443, 33443, 3996, 33996}, /* DDR2-667 SC */
- {1, 400, 800, 3430, 33430, 3946, 33946}, /* DDR2-800 SC */
+ {1, 0, 400, 400, 3472, 33472, 4173, 34173}, /* DDR2-400 SC */
+ {1, 0, 400, 667, 3443, 33443, 3996, 33996}, /* DDR2-667 SC */
+ {1, 0, 400, 800, 3430, 33430, 3946, 33946}, /* DDR2-800 SC */
+ {1, 1, 400, 667, 6509, 36509, 7062, 37062}, /* DDR3-667 SC */
+ {1, 1, 400, 800, 5985, 35985, 6501, 36501}, /* DDR3-800 SC */
- {0, 800, 400, 3438, 33438, 4065, 34065}, /* DDR2-400 SC */
- {0, 800, 667, 3410, 33410, 3889, 33889}, /* DDR2-667 SC */
- {0, 800, 800, 3403, 33403, 3845, 33845}, /* DDR2-800 SC */
+ {0, 0, 800, 400, 3438, 33438, 4065, 34065}, /* DDR2-400 SC */
+ {0, 0, 800, 667, 3410, 33410, 3889, 33889}, /* DDR2-667 SC */
+ {0, 0, 800, 800, 3403, 33403, 3845, 33845}, /* DDR2-800 SC */
+ {0, 1, 800, 667, 6476, 36476, 6955, 36955}, /* DDR3-667 SC */
+ {0, 1, 800, 800, 5958, 35958, 6400, 36400}, /* DDR3-800 SC */
- {0, 667, 400, 3456, 33456, 4103, 34106}, /* DDR2-400 SC */
- {0, 667, 667, 3428, 33428, 3927, 33927}, /* DDR2-667 SC */
- {0, 667, 800, 3443, 33443, 3905, 33905}, /* DDR2-800 SC */
+ {0, 0, 667, 400, 3456, 33456, 4103, 34106}, /* DDR2-400 SC */
+ {0, 0, 667, 667, 3428, 33428, 3927, 33927}, /* DDR2-667 SC */
+ {0, 0, 667, 800, 3443, 33443, 3905, 33905}, /* DDR2-800 SC */
+ {0, 1, 667, 667, 6494, 36494, 6993, 36993}, /* DDR3-667 SC */
+ {0, 1, 667, 800, 5998, 35998, 6460, 36460}, /* DDR3-800 SC */
- {0, 400, 400, 3528, 33528, 4255, 34255}, /* DDR2-400 SC */
- {0, 400, 667, 3500, 33500, 4079, 34079}, /* DDR2-667 SC */
- {0, 400, 800, 3487, 33487, 4029, 34029}, /* DDR2-800 SC */
+ {0, 0, 400, 400, 3528, 33528, 4255, 34255}, /* DDR2-400 SC */
+ {0, 0, 400, 667, 3500, 33500, 4079, 34079}, /* DDR2-667 SC */
+ {0, 0, 400, 800, 3487, 33487, 4029, 34029}, /* DDR2-800 SC */
+ {0, 1, 400, 667, 6566, 36566, 7145, 37145}, /* DDR3-667 SC */
+ {0, 1, 400, 800, 6042, 36042, 6584, 36584}, /* DDR3-800 SC */
};
-static struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, int fsb,
- int mem)
+static struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, int is_ddr3,
+ int fsb, int mem)
{
int i;
struct cxsr_latency *latency;
@@ -2675,6 +2701,7 @@
for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) {
latency = &cxsr_latency_table[i];
if (is_desktop == latency->is_desktop &&
+ is_ddr3 == latency->is_ddr3 &&
fsb == latency->fsb_freq && mem == latency->mem_freq)
return latency;
}
@@ -2789,8 +2816,8 @@
struct cxsr_latency *latency;
int sr_clock;
- latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->fsb_freq,
- dev_priv->mem_freq);
+ latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3,
+ dev_priv->fsb_freq, dev_priv->mem_freq);
if (!latency) {
DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
pineview_disable_cxsr(dev);
@@ -2943,11 +2970,13 @@
if (srwm < 0)
srwm = 1;
srwm &= 0x3f;
- I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
+ if (IS_I965GM(dev))
+ I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
} else {
/* Turn off self refresh if both pipes are enabled */
- I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
- & ~FW_BLC_SELF_EN);
+ if (IS_I965GM(dev))
+ I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
+ & ~FW_BLC_SELF_EN);
}
DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n",
@@ -3626,6 +3655,11 @@
pipeconf &= ~PIPEACONF_DOUBLE_WIDE;
}
+ dspcntr |= DISPLAY_PLANE_ENABLE;
+ pipeconf |= PIPEACONF_ENABLE;
+ dpll |= DPLL_VCO_ENABLE;
+
+
/* Disable the panel fitter if it was on our pipe */
if (!HAS_PCH_SPLIT(dev) && intel_panel_fitter_pipe(dev) == pipe)
I915_WRITE(PFIT_CONTROL, 0);
@@ -3772,6 +3806,18 @@
}
}
+ if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
+ pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
+ /* the chip adds 2 halflines automatically */
+ adjusted_mode->crtc_vdisplay -= 1;
+ adjusted_mode->crtc_vtotal -= 1;
+ adjusted_mode->crtc_vblank_start -= 1;
+ adjusted_mode->crtc_vblank_end -= 1;
+ adjusted_mode->crtc_vsync_end -= 1;
+ adjusted_mode->crtc_vsync_start -= 1;
+ } else
+ pipeconf &= ~PIPECONF_INTERLACE_W_FIELD_INDICATION; /* progressive */
+
I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
((adjusted_mode->crtc_htotal - 1) << 16));
I915_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
@@ -3934,6 +3980,13 @@
DRM_ERROR("failed to pin cursor bo\n");
goto fail_locked;
}
+
+ ret = i915_gem_object_set_to_gtt_domain(bo, 0);
+ if (ret) {
+ DRM_ERROR("failed to move cursor bo into the GTT\n");
+ goto fail_unpin;
+ }
+
addr = obj_priv->gtt_offset;
} else {
ret = i915_gem_attach_phys_object(dev, bo, (pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1);
@@ -3977,6 +4030,8 @@
intel_crtc->cursor_bo = bo;
return 0;
+fail_unpin:
+ i915_gem_object_unpin(bo);
fail_locked:
mutex_unlock(&dev->struct_mutex);
fail:
@@ -4430,27 +4485,31 @@
struct drm_device *dev = dev_priv->dev;
struct drm_crtc *crtc;
struct intel_crtc *intel_crtc;
+ int enabled = 0;
if (!i915_powersave)
return;
mutex_lock(&dev->struct_mutex);
- if (IS_I945G(dev) || IS_I945GM(dev)) {
- DRM_DEBUG_DRIVER("enable memory self refresh on 945\n");
- I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN);
- }
+ i915_update_gfx_val(dev_priv);
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
/* Skip inactive CRTCs */
if (!crtc->fb)
continue;
+ enabled++;
intel_crtc = to_intel_crtc(crtc);
if (!intel_crtc->busy)
intel_decrease_pllclock(crtc);
}
+ if ((enabled == 1) && (IS_I945G(dev) || IS_I945GM(dev))) {
+ DRM_DEBUG_DRIVER("enable memory self refresh on 945\n");
+ I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN);
+ }
+
mutex_unlock(&dev->struct_mutex);
}
@@ -4546,10 +4605,10 @@
kfree(work);
}
-void intel_finish_page_flip(struct drm_device *dev, int pipe)
+static void do_intel_finish_page_flip(struct drm_device *dev,
+ struct drm_crtc *crtc)
{
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_unpin_work *work;
struct drm_i915_gem_object *obj_priv;
@@ -4564,12 +4623,6 @@
spin_lock_irqsave(&dev->event_lock, flags);
work = intel_crtc->unpin_work;
if (work == NULL || !work->pending) {
- if (work && !work->pending) {
- obj_priv = to_intel_bo(work->pending_flip_obj);
- DRM_DEBUG_DRIVER("flip finish: %p (%d) not pending?\n",
- obj_priv,
- atomic_read(&obj_priv->pending_flip));
- }
spin_unlock_irqrestore(&dev->event_lock, flags);
return;
}
@@ -4599,6 +4652,22 @@
schedule_work(&work->work);
}
+void intel_finish_page_flip(struct drm_device *dev, int pipe)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
+
+ do_intel_finish_page_flip(dev, crtc);
+}
+
+void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
+
+ do_intel_finish_page_flip(dev, crtc);
+}
+
void intel_prepare_page_flip(struct drm_device *dev, int plane)
{
drm_i915_private_t *dev_priv = dev->dev_private;
@@ -4629,14 +4698,12 @@
unsigned long flags;
int pipesrc_reg = (intel_crtc->pipe == 0) ? PIPEASRC : PIPEBSRC;
int ret, pipesrc;
- RING_LOCALS;
+ u32 flip_mask;
work = kzalloc(sizeof *work, GFP_KERNEL);
if (work == NULL)
return -ENOMEM;
- mutex_lock(&dev->struct_mutex);
-
work->event = event;
work->dev = crtc->dev;
intel_fb = to_intel_framebuffer(crtc->fb);
@@ -4646,10 +4713,10 @@
/* We borrow the event spin lock for protecting unpin_work */
spin_lock_irqsave(&dev->event_lock, flags);
if (intel_crtc->unpin_work) {
- DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
spin_unlock_irqrestore(&dev->event_lock, flags);
kfree(work);
- mutex_unlock(&dev->struct_mutex);
+
+ DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
return -EBUSY;
}
intel_crtc->unpin_work = work;
@@ -4658,13 +4725,19 @@
intel_fb = to_intel_framebuffer(fb);
obj = intel_fb->obj;
+ mutex_lock(&dev->struct_mutex);
ret = intel_pin_and_fence_fb_obj(dev, obj);
if (ret != 0) {
- DRM_DEBUG_DRIVER("flip queue: %p pin & fence failed\n",
- to_intel_bo(obj));
- kfree(work);
- intel_crtc->unpin_work = NULL;
mutex_unlock(&dev->struct_mutex);
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ intel_crtc->unpin_work = NULL;
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+
+ kfree(work);
+
+ DRM_DEBUG_DRIVER("flip queue: %p pin & fence failed\n",
+ to_intel_bo(obj));
return ret;
}
@@ -4679,15 +4752,28 @@
atomic_inc(&obj_priv->pending_flip);
work->pending_flip_obj = obj;
+ if (intel_crtc->plane)
+ flip_mask = I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
+ else
+ flip_mask = I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT;
+
+ /* Wait for any previous flip to finish */
+ if (IS_GEN3(dev))
+ while (I915_READ(ISR) & flip_mask)
+ ;
+
BEGIN_LP_RING(4);
- OUT_RING(MI_DISPLAY_FLIP |
- MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
- OUT_RING(fb->pitch);
if (IS_I965G(dev)) {
+ OUT_RING(MI_DISPLAY_FLIP |
+ MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+ OUT_RING(fb->pitch);
OUT_RING(obj_priv->gtt_offset | obj_priv->tiling_mode);
pipesrc = I915_READ(pipesrc_reg);
OUT_RING(pipesrc & 0x0fff0fff);
} else {
+ OUT_RING(MI_DISPLAY_FLIP_I915 |
+ MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+ OUT_RING(fb->pitch);
OUT_RING(obj_priv->gtt_offset);
OUT_RING(MI_NOOP);
}
@@ -5023,10 +5109,32 @@
return NULL;
}
+bool ironlake_set_drps(struct drm_device *dev, u8 val)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u16 rgvswctl;
+
+ rgvswctl = I915_READ16(MEMSWCTL);
+ if (rgvswctl & MEMCTL_CMD_STS) {
+ DRM_DEBUG("gpu busy, RCS change rejected\n");
+ return false; /* still busy with another command */
+ }
+
+ rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
+ (val << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
+ I915_WRITE16(MEMSWCTL, rgvswctl);
+ POSTING_READ16(MEMSWCTL);
+
+ rgvswctl |= MEMCTL_CMD_STS;
+ I915_WRITE16(MEMSWCTL, rgvswctl);
+
+ return true;
+}
+
void ironlake_enable_drps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 rgvmodectl = I915_READ(MEMMODECTL), rgvswctl;
+ u32 rgvmodectl = I915_READ(MEMMODECTL);
u8 fmax, fmin, fstart, vstart;
int i = 0;
@@ -5045,13 +5153,21 @@
fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
MEMMODE_FSTART_SHIFT;
+ fstart = fmax;
+
vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >>
PXVFREQ_PX_SHIFT;
- dev_priv->max_delay = fstart; /* can't go to fmax w/o IPS */
+ dev_priv->fmax = fstart; /* IPS callback will increase this */
+ dev_priv->fstart = fstart;
+
+ dev_priv->max_delay = fmax;
dev_priv->min_delay = fmin;
dev_priv->cur_delay = fstart;
+ DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n", fmax, fmin,
+ fstart);
+
I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);
/*
@@ -5073,20 +5189,19 @@
}
msleep(1);
- rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
- (fstart << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
- I915_WRITE(MEMSWCTL, rgvswctl);
- POSTING_READ(MEMSWCTL);
+ ironlake_set_drps(dev, fstart);
- rgvswctl |= MEMCTL_CMD_STS;
- I915_WRITE(MEMSWCTL, rgvswctl);
+ dev_priv->last_count1 = I915_READ(0x112e4) + I915_READ(0x112e8) +
+ I915_READ(0x112e0);
+ dev_priv->last_time1 = jiffies_to_msecs(jiffies);
+ dev_priv->last_count2 = I915_READ(0x112f4);
+ getrawmonotonic(&dev_priv->last_time2);
}
void ironlake_disable_drps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 rgvswctl;
- u8 fstart;
+ u16 rgvswctl = I915_READ16(MEMSWCTL);
/* Ack interrupts, disable EFC interrupt */
I915_WRITE(MEMINTREN, I915_READ(MEMINTREN) & ~MEMINT_EVAL_CHG_EN);
@@ -5096,11 +5211,7 @@
I915_WRITE(DEIMR, I915_READ(DEIMR) | DE_PCU_EVENT);
/* Go back to the starting frequency */
- fstart = (I915_READ(MEMMODECTL) & MEMMODE_FSTART_MASK) >>
- MEMMODE_FSTART_SHIFT;
- rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
- (fstart << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
- I915_WRITE(MEMSWCTL, rgvswctl);
+ ironlake_set_drps(dev, dev_priv->fstart);
msleep(1);
rgvswctl |= MEMCTL_CMD_STS;
I915_WRITE(MEMSWCTL, rgvswctl);
@@ -5108,6 +5219,92 @@
}
+static unsigned long intel_pxfreq(u32 vidfreq)
+{
+ unsigned long freq;
+ int div = (vidfreq & 0x3f0000) >> 16;
+ int post = (vidfreq & 0x3000) >> 12;
+ int pre = (vidfreq & 0x7);
+
+ if (!pre)
+ return 0;
+
+ freq = ((div * 133333) / ((1<<post) * pre));
+
+ return freq;
+}
+
+void intel_init_emon(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 lcfuse;
+ u8 pxw[16];
+ int i;
+
+ /* Disable to program */
+ I915_WRITE(ECR, 0);
+ POSTING_READ(ECR);
+
+ /* Program energy weights for various events */
+ I915_WRITE(SDEW, 0x15040d00);
+ I915_WRITE(CSIEW0, 0x007f0000);
+ I915_WRITE(CSIEW1, 0x1e220004);
+ I915_WRITE(CSIEW2, 0x04000004);
+
+ for (i = 0; i < 5; i++)
+ I915_WRITE(PEW + (i * 4), 0);
+ for (i = 0; i < 3; i++)
+ I915_WRITE(DEW + (i * 4), 0);
+
+ /* Program P-state weights to account for frequency power adjustment */
+ for (i = 0; i < 16; i++) {
+ u32 pxvidfreq = I915_READ(PXVFREQ_BASE + (i * 4));
+ unsigned long freq = intel_pxfreq(pxvidfreq);
+ unsigned long vid = (pxvidfreq & PXVFREQ_PX_MASK) >>
+ PXVFREQ_PX_SHIFT;
+ unsigned long val;
+
+ val = vid * vid;
+ val *= (freq / 1000);
+ val *= 255;
+ val /= (127*127*900);
+ if (val > 0xff)
+ DRM_ERROR("bad pxval: %ld\n", val);
+ pxw[i] = val;
+ }
+ /* Render standby states get 0 weight */
+ pxw[14] = 0;
+ pxw[15] = 0;
+
+ for (i = 0; i < 4; i++) {
+ u32 val = (pxw[i*4] << 24) | (pxw[(i*4)+1] << 16) |
+ (pxw[(i*4)+2] << 8) | (pxw[(i*4)+3]);
+ I915_WRITE(PXW + (i * 4), val);
+ }
+
+ /* Adjust magic regs to magic values (more experimental results) */
+ I915_WRITE(OGW0, 0);
+ I915_WRITE(OGW1, 0);
+ I915_WRITE(EG0, 0x00007f00);
+ I915_WRITE(EG1, 0x0000000e);
+ I915_WRITE(EG2, 0x000e0000);
+ I915_WRITE(EG3, 0x68000300);
+ I915_WRITE(EG4, 0x42000000);
+ I915_WRITE(EG5, 0x00140031);
+ I915_WRITE(EG6, 0);
+ I915_WRITE(EG7, 0);
+
+ for (i = 0; i < 8; i++)
+ I915_WRITE(PXWL + (i * 4), 0);
+
+ /* Enable PMON + select events */
+ I915_WRITE(ECR, 0x80000019);
+
+ lcfuse = I915_READ(LCFUSE02);
+
+ dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK);
+}
+
void intel_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -5277,11 +5474,13 @@
dev_priv->display.update_wm = NULL;
} else if (IS_PINEVIEW(dev)) {
if (!intel_get_cxsr_latency(IS_PINEVIEW_G(dev),
+ dev_priv->is_ddr3,
dev_priv->fsb_freq,
dev_priv->mem_freq)) {
DRM_INFO("failed to find known CxSR latency "
- "(found fsb freq %d, mem freq %d), "
+ "(found ddr%s fsb freq %d, mem freq %d), "
"disabling CxSR\n",
+ (dev_priv->is_ddr3 == 1) ? "3": "2",
dev_priv->fsb_freq, dev_priv->mem_freq);
/* Disable CxSR and never update its watermark again */
pineview_disable_cxsr(dev);
@@ -5310,7 +5509,6 @@
void intel_modeset_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int num_pipe;
int i;
drm_mode_config_init(dev);
@@ -5340,13 +5538,13 @@
dev->mode_config.fb_base = pci_resource_start(dev->pdev, 0);
if (IS_MOBILE(dev) || IS_I9XX(dev))
- num_pipe = 2;
+ dev_priv->num_pipe = 2;
else
- num_pipe = 1;
+ dev_priv->num_pipe = 1;
DRM_DEBUG_KMS("%d display pipe%s available.\n",
- num_pipe, num_pipe > 1 ? "s" : "");
+ dev_priv->num_pipe, dev_priv->num_pipe > 1 ? "s" : "");
- for (i = 0; i < num_pipe; i++) {
+ for (i = 0; i < dev_priv->num_pipe; i++) {
intel_crtc_init(dev, i);
}
@@ -5354,8 +5552,10 @@
intel_init_clock_gating(dev);
- if (IS_IRONLAKE_M(dev))
+ if (IS_IRONLAKE_M(dev)) {
ironlake_enable_drps(dev);
+ intel_init_emon(dev);
+ }
INIT_WORK(&dev_priv->idle_work, intel_idle_update);
setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer,
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 6b1c9a2..1aac59e 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -136,6 +136,12 @@
}
static int
+intel_dp_max_data_rate(int max_link_clock, int max_lanes)
+{
+ return (max_link_clock * max_lanes * 8) / 10;
+}
+
+static int
intel_dp_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
@@ -144,8 +150,11 @@
int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_encoder));
int max_lanes = intel_dp_max_lane_count(intel_encoder);
- if (intel_dp_link_required(connector->dev, intel_encoder, mode->clock)
- > max_link_clock * max_lanes)
+ /* only refuse the mode on non eDP since we have seen some wierd eDP panels
+ which are outside spec tolerances but somehow work by magic */
+ if (!IS_eDP(intel_encoder) &&
+ (intel_dp_link_required(connector->dev, intel_encoder, mode->clock)
+ > intel_dp_max_data_rate(max_link_clock, max_lanes)))
return MODE_CLOCK_HIGH;
if (mode->clock < 10000)
@@ -506,7 +515,7 @@
for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
for (clock = 0; clock <= max_clock; clock++) {
- int link_avail = intel_dp_link_clock(bws[clock]) * lane_count;
+ int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
if (intel_dp_link_required(encoder->dev, intel_encoder, mode->clock)
<= link_avail) {
@@ -521,6 +530,18 @@
}
}
}
+
+ if (IS_eDP(intel_encoder)) {
+ /* okay we failed just pick the highest */
+ dp_priv->lane_count = max_lane_count;
+ dp_priv->link_bw = bws[max_clock];
+ adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw);
+ DRM_DEBUG_KMS("Force picking display port link bw %02x lane "
+ "count %d clock %d\n",
+ dp_priv->link_bw, dp_priv->lane_count,
+ adjusted_mode->clock);
+ return true;
+ }
return false;
}
@@ -576,7 +597,7 @@
struct intel_encoder *intel_encoder;
struct intel_dp_priv *dp_priv;
- if (!encoder || encoder->crtc != crtc)
+ if (encoder->crtc != crtc)
continue;
intel_encoder = enc_to_intel_encoder(encoder);
@@ -675,10 +696,9 @@
dp_priv->link_configuration[1] = dp_priv->lane_count;
/*
- * Check for DPCD version > 1.1,
- * enable enahanced frame stuff in that case
+ * Check for DPCD version > 1.1 and enhanced framing support
*/
- if (dp_priv->dpcd[0] >= 0x11) {
+ if (dp_priv->dpcd[0] >= 0x11 && (dp_priv->dpcd[2] & DP_ENHANCED_FRAME_CAP)) {
dp_priv->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
dp_priv->DP |= DP_ENHANCED_FRAMING;
}
@@ -1208,6 +1228,8 @@
if (dp_priv->dpcd[0] != 0)
status = connector_status_connected;
}
+ DRM_DEBUG_KMS("DPCD: %hx%hx%hx%hx\n", dp_priv->dpcd[0],
+ dp_priv->dpcd[1], dp_priv->dpcd[2], dp_priv->dpcd[3]);
return status;
}
@@ -1352,7 +1374,7 @@
struct intel_encoder *intel_encoder = NULL;
list_for_each_entry(encoder, &mode_config->encoder_list, head) {
- if (!encoder || encoder->crtc != crtc)
+ if (encoder->crtc != crtc)
continue;
intel_encoder = enc_to_intel_encoder(encoder);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index df931f7..72206f3 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -224,6 +224,7 @@
extern void intel_prepare_page_flip(struct drm_device *dev, int plane);
extern void intel_finish_page_flip(struct drm_device *dev, int pipe);
+extern void intel_finish_page_flip_plane(struct drm_device *dev, int plane);
extern void intel_setup_overlay(struct drm_device *dev);
extern void intel_cleanup_overlay(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 6f53cf7..c3c5052 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -105,7 +105,11 @@
}
/* Flush everything out, we'll be doing GTT only from now on */
- i915_gem_object_set_to_gtt_domain(fbo, 1);
+ ret = i915_gem_object_set_to_gtt_domain(fbo, 1);
+ if (ret) {
+ DRM_ERROR("failed to bind fb: %d.\n", ret);
+ goto out_unpin;
+ }
info = framebuffer_alloc(0, device);
if (!info) {
@@ -241,6 +245,7 @@
{
struct intel_fbdev *ifbdev;
drm_i915_private_t *dev_priv = dev->dev_private;
+ int ret;
ifbdev = kzalloc(sizeof(struct intel_fbdev), GFP_KERNEL);
if (!ifbdev)
@@ -249,8 +254,13 @@
dev_priv->fbdev = ifbdev;
ifbdev->helper.funcs = &intel_fb_helper_funcs;
- drm_fb_helper_init(dev, &ifbdev->helper, 2,
- INTELFB_CONN_LIMIT);
+ ret = drm_fb_helper_init(dev, &ifbdev->helper,
+ dev_priv->num_pipe,
+ INTELFB_CONN_LIMIT);
+ if (ret) {
+ kfree(ifbdev);
+ return ret;
+ }
drm_fb_helper_single_add_all_connectors(&ifbdev->helper);
drm_fb_helper_initial_config(&ifbdev->helper, 32);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 65727f0..83bd764 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -59,8 +59,11 @@
SDVO_VSYNC_ACTIVE_HIGH |
SDVO_HSYNC_ACTIVE_HIGH;
- if (hdmi_priv->has_hdmi_sink)
+ if (hdmi_priv->has_hdmi_sink) {
sdvox |= SDVO_AUDIO_ENABLE;
+ if (HAS_PCH_CPT(dev))
+ sdvox |= HDMI_MODE_SELECT;
+ }
if (intel_crtc->pipe == 1) {
if (HAS_PCH_CPT(dev))
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 6a1accd..31df55f 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -983,8 +983,8 @@
drm_connector_attach_property(&intel_connector->base,
dev->mode_config.scaling_mode_property,
- DRM_MODE_SCALE_FULLSCREEN);
- lvds_priv->fitting_mode = DRM_MODE_SCALE_FULLSCREEN;
+ DRM_MODE_SCALE_ASPECT);
+ lvds_priv->fitting_mode = DRM_MODE_SCALE_ASPECT;
/*
* LVDS discovery:
* 1) check for EDID on DDC
diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c
index b0e17b0..d7ad513 100644
--- a/drivers/gpu/drm/i915/intel_overlay.c
+++ b/drivers/gpu/drm/i915/intel_overlay.c
@@ -211,9 +211,8 @@
static int intel_overlay_on(struct intel_overlay *overlay)
{
struct drm_device *dev = overlay->dev;
- drm_i915_private_t *dev_priv = dev->dev_private;
int ret;
- RING_LOCALS;
+ drm_i915_private_t *dev_priv = dev->dev_private;
BUG_ON(overlay->active);
@@ -227,11 +226,13 @@
OUT_RING(MI_NOOP);
ADVANCE_LP_RING();
- overlay->last_flip_req = i915_add_request(dev, NULL, 0);
+ overlay->last_flip_req =
+ i915_add_request(dev, NULL, 0, &dev_priv->render_ring);
if (overlay->last_flip_req == 0)
return -ENOMEM;
- ret = i915_do_wait_request(dev, overlay->last_flip_req, 1);
+ ret = i915_do_wait_request(dev,
+ overlay->last_flip_req, 1, &dev_priv->render_ring);
if (ret != 0)
return ret;
@@ -248,7 +249,6 @@
drm_i915_private_t *dev_priv = dev->dev_private;
u32 flip_addr = overlay->flip_addr;
u32 tmp;
- RING_LOCALS;
BUG_ON(!overlay->active);
@@ -265,7 +265,8 @@
OUT_RING(flip_addr);
ADVANCE_LP_RING();
- overlay->last_flip_req = i915_add_request(dev, NULL, 0);
+ overlay->last_flip_req =
+ i915_add_request(dev, NULL, 0, &dev_priv->render_ring);
}
static int intel_overlay_wait_flip(struct intel_overlay *overlay)
@@ -274,10 +275,10 @@
drm_i915_private_t *dev_priv = dev->dev_private;
int ret;
u32 tmp;
- RING_LOCALS;
if (overlay->last_flip_req != 0) {
- ret = i915_do_wait_request(dev, overlay->last_flip_req, 1);
+ ret = i915_do_wait_request(dev, overlay->last_flip_req,
+ 1, &dev_priv->render_ring);
if (ret == 0) {
overlay->last_flip_req = 0;
@@ -296,11 +297,13 @@
OUT_RING(MI_NOOP);
ADVANCE_LP_RING();
- overlay->last_flip_req = i915_add_request(dev, NULL, 0);
+ overlay->last_flip_req =
+ i915_add_request(dev, NULL, 0, &dev_priv->render_ring);
if (overlay->last_flip_req == 0)
return -ENOMEM;
- ret = i915_do_wait_request(dev, overlay->last_flip_req, 1);
+ ret = i915_do_wait_request(dev, overlay->last_flip_req,
+ 1, &dev_priv->render_ring);
if (ret != 0)
return ret;
@@ -314,9 +317,8 @@
{
u32 flip_addr = overlay->flip_addr;
struct drm_device *dev = overlay->dev;
- drm_i915_private_t *dev_priv = dev->dev_private;
+ drm_i915_private_t *dev_priv = dev->dev_private;
int ret;
- RING_LOCALS;
BUG_ON(!overlay->active);
@@ -336,11 +338,13 @@
OUT_RING(MI_NOOP);
ADVANCE_LP_RING();
- overlay->last_flip_req = i915_add_request(dev, NULL, 0);
+ overlay->last_flip_req =
+ i915_add_request(dev, NULL, 0, &dev_priv->render_ring);
if (overlay->last_flip_req == 0)
return -ENOMEM;
- ret = i915_do_wait_request(dev, overlay->last_flip_req, 1);
+ ret = i915_do_wait_request(dev, overlay->last_flip_req,
+ 1, &dev_priv->render_ring);
if (ret != 0)
return ret;
@@ -354,11 +358,13 @@
OUT_RING(MI_NOOP);
ADVANCE_LP_RING();
- overlay->last_flip_req = i915_add_request(dev, NULL, 0);
+ overlay->last_flip_req =
+ i915_add_request(dev, NULL, 0, &dev_priv->render_ring);
if (overlay->last_flip_req == 0)
return -ENOMEM;
- ret = i915_do_wait_request(dev, overlay->last_flip_req, 1);
+ ret = i915_do_wait_request(dev, overlay->last_flip_req,
+ 1, &dev_priv->render_ring);
if (ret != 0)
return ret;
@@ -390,22 +396,23 @@
int interruptible)
{
struct drm_device *dev = overlay->dev;
- drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_gem_object *obj;
+ drm_i915_private_t *dev_priv = dev->dev_private;
u32 flip_addr;
int ret;
- RING_LOCALS;
if (overlay->hw_wedged == HW_WEDGED)
return -EIO;
if (overlay->last_flip_req == 0) {
- overlay->last_flip_req = i915_add_request(dev, NULL, 0);
+ overlay->last_flip_req =
+ i915_add_request(dev, NULL, 0, &dev_priv->render_ring);
if (overlay->last_flip_req == 0)
return -ENOMEM;
}
- ret = i915_do_wait_request(dev, overlay->last_flip_req, interruptible);
+ ret = i915_do_wait_request(dev, overlay->last_flip_req,
+ interruptible, &dev_priv->render_ring);
if (ret != 0)
return ret;
@@ -429,12 +436,13 @@
OUT_RING(MI_NOOP);
ADVANCE_LP_RING();
- overlay->last_flip_req = i915_add_request(dev, NULL, 0);
+ overlay->last_flip_req = i915_add_request(dev, NULL,
+ 0, &dev_priv->render_ring);
if (overlay->last_flip_req == 0)
return -ENOMEM;
ret = i915_do_wait_request(dev, overlay->last_flip_req,
- interruptible);
+ interruptible, &dev_priv->render_ring);
if (ret != 0)
return ret;
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
new file mode 100644
index 0000000..26362f8
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -0,0 +1,851 @@
+/*
+ * Copyright © 2008-2010 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ * Eric Anholt <eric@anholt.net>
+ * Zou Nan hai <nanhai.zou@intel.com>
+ * Xiang Hai hao<haihao.xiang@intel.com>
+ *
+ */
+
+#include "drmP.h"
+#include "drm.h"
+#include "i915_drv.h"
+#include "i915_drm.h"
+#include "i915_trace.h"
+
+static void
+render_ring_flush(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ u32 invalidate_domains,
+ u32 flush_domains)
+{
+#if WATCH_EXEC
+ DRM_INFO("%s: invalidate %08x flush %08x\n", __func__,
+ invalidate_domains, flush_domains);
+#endif
+ u32 cmd;
+ trace_i915_gem_request_flush(dev, ring->next_seqno,
+ invalidate_domains, flush_domains);
+
+ if ((invalidate_domains | flush_domains) & I915_GEM_GPU_DOMAINS) {
+ /*
+ * read/write caches:
+ *
+ * I915_GEM_DOMAIN_RENDER is always invalidated, but is
+ * only flushed if MI_NO_WRITE_FLUSH is unset. On 965, it is
+ * also flushed at 2d versus 3d pipeline switches.
+ *
+ * read-only caches:
+ *
+ * I915_GEM_DOMAIN_SAMPLER is flushed on pre-965 if
+ * MI_READ_FLUSH is set, and is always flushed on 965.
+ *
+ * I915_GEM_DOMAIN_COMMAND may not exist?
+ *
+ * I915_GEM_DOMAIN_INSTRUCTION, which exists on 965, is
+ * invalidated when MI_EXE_FLUSH is set.
+ *
+ * I915_GEM_DOMAIN_VERTEX, which exists on 965, is
+ * invalidated with every MI_FLUSH.
+ *
+ * TLBs:
+ *
+ * On 965, TLBs associated with I915_GEM_DOMAIN_COMMAND
+ * and I915_GEM_DOMAIN_CPU in are invalidated at PTE write and
+ * I915_GEM_DOMAIN_RENDER and I915_GEM_DOMAIN_SAMPLER
+ * are flushed at any MI_FLUSH.
+ */
+
+ cmd = MI_FLUSH | MI_NO_WRITE_FLUSH;
+ if ((invalidate_domains|flush_domains) &
+ I915_GEM_DOMAIN_RENDER)
+ cmd &= ~MI_NO_WRITE_FLUSH;
+ if (!IS_I965G(dev)) {
+ /*
+ * On the 965, the sampler cache always gets flushed
+ * and this bit is reserved.
+ */
+ if (invalidate_domains & I915_GEM_DOMAIN_SAMPLER)
+ cmd |= MI_READ_FLUSH;
+ }
+ if (invalidate_domains & I915_GEM_DOMAIN_INSTRUCTION)
+ cmd |= MI_EXE_FLUSH;
+
+#if WATCH_EXEC
+ DRM_INFO("%s: queue flush %08x to ring\n", __func__, cmd);
+#endif
+ intel_ring_begin(dev, ring, 2);
+ intel_ring_emit(dev, ring, cmd);
+ intel_ring_emit(dev, ring, MI_NOOP);
+ intel_ring_advance(dev, ring);
+ }
+}
+
+static unsigned int render_ring_get_head(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ return I915_READ(PRB0_HEAD) & HEAD_ADDR;
+}
+
+static unsigned int render_ring_get_tail(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ return I915_READ(PRB0_TAIL) & TAIL_ADDR;
+}
+
+static unsigned int render_ring_get_active_head(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ u32 acthd_reg = IS_I965G(dev) ? ACTHD_I965 : ACTHD;
+
+ return I915_READ(acthd_reg);
+}
+
+static void render_ring_advance_ring(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ I915_WRITE(PRB0_TAIL, ring->tail);
+}
+
+static int init_ring_common(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ u32 head;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_gem_object *obj_priv;
+ obj_priv = to_intel_bo(ring->gem_object);
+
+ /* Stop the ring if it's running. */
+ I915_WRITE(ring->regs.ctl, 0);
+ I915_WRITE(ring->regs.head, 0);
+ I915_WRITE(ring->regs.tail, 0);
+
+ /* Initialize the ring. */
+ I915_WRITE(ring->regs.start, obj_priv->gtt_offset);
+ head = ring->get_head(dev, ring);
+
+ /* G45 ring initialization fails to reset head to zero */
+ if (head != 0) {
+ DRM_ERROR("%s head not reset to zero "
+ "ctl %08x head %08x tail %08x start %08x\n",
+ ring->name,
+ I915_READ(ring->regs.ctl),
+ I915_READ(ring->regs.head),
+ I915_READ(ring->regs.tail),
+ I915_READ(ring->regs.start));
+
+ I915_WRITE(ring->regs.head, 0);
+
+ DRM_ERROR("%s head forced to zero "
+ "ctl %08x head %08x tail %08x start %08x\n",
+ ring->name,
+ I915_READ(ring->regs.ctl),
+ I915_READ(ring->regs.head),
+ I915_READ(ring->regs.tail),
+ I915_READ(ring->regs.start));
+ }
+
+ I915_WRITE(ring->regs.ctl,
+ ((ring->gem_object->size - PAGE_SIZE) & RING_NR_PAGES)
+ | RING_NO_REPORT | RING_VALID);
+
+ head = I915_READ(ring->regs.head) & HEAD_ADDR;
+ /* If the head is still not zero, the ring is dead */
+ if (head != 0) {
+ DRM_ERROR("%s initialization failed "
+ "ctl %08x head %08x tail %08x start %08x\n",
+ ring->name,
+ I915_READ(ring->regs.ctl),
+ I915_READ(ring->regs.head),
+ I915_READ(ring->regs.tail),
+ I915_READ(ring->regs.start));
+ return -EIO;
+ }
+
+ if (!drm_core_check_feature(dev, DRIVER_MODESET))
+ i915_kernel_lost_context(dev);
+ else {
+ ring->head = ring->get_head(dev, ring);
+ ring->tail = ring->get_tail(dev, ring);
+ ring->space = ring->head - (ring->tail + 8);
+ if (ring->space < 0)
+ ring->space += ring->size;
+ }
+ return 0;
+}
+
+static int init_render_ring(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ int ret = init_ring_common(dev, ring);
+ if (IS_I9XX(dev) && !IS_GEN3(dev)) {
+ I915_WRITE(MI_MODE,
+ (VS_TIMER_DISPATCH) << 16 | VS_TIMER_DISPATCH);
+ }
+ return ret;
+}
+
+#define PIPE_CONTROL_FLUSH(addr) \
+do { \
+ OUT_RING(GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE | \
+ PIPE_CONTROL_DEPTH_STALL | 2); \
+ OUT_RING(addr | PIPE_CONTROL_GLOBAL_GTT); \
+ OUT_RING(0); \
+ OUT_RING(0); \
+} while (0)
+
+/**
+ * Creates a new sequence number, emitting a write of it to the status page
+ * plus an interrupt, which will trigger i915_user_interrupt_handler.
+ *
+ * Must be called with struct_lock held.
+ *
+ * Returned sequence numbers are nonzero on success.
+ */
+static u32
+render_ring_add_request(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ struct drm_file *file_priv,
+ u32 flush_domains)
+{
+ u32 seqno;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ seqno = intel_ring_get_seqno(dev, ring);
+
+ if (IS_GEN6(dev)) {
+ BEGIN_LP_RING(6);
+ OUT_RING(GFX_OP_PIPE_CONTROL | 3);
+ OUT_RING(PIPE_CONTROL_QW_WRITE |
+ PIPE_CONTROL_WC_FLUSH | PIPE_CONTROL_IS_FLUSH |
+ PIPE_CONTROL_NOTIFY);
+ OUT_RING(dev_priv->seqno_gfx_addr | PIPE_CONTROL_GLOBAL_GTT);
+ OUT_RING(seqno);
+ OUT_RING(0);
+ OUT_RING(0);
+ ADVANCE_LP_RING();
+ } else if (HAS_PIPE_CONTROL(dev)) {
+ u32 scratch_addr = dev_priv->seqno_gfx_addr + 128;
+
+ /*
+ * Workaround qword write incoherence by flushing the
+ * PIPE_NOTIFY buffers out to memory before requesting
+ * an interrupt.
+ */
+ BEGIN_LP_RING(32);
+ OUT_RING(GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE |
+ PIPE_CONTROL_WC_FLUSH | PIPE_CONTROL_TC_FLUSH);
+ OUT_RING(dev_priv->seqno_gfx_addr | PIPE_CONTROL_GLOBAL_GTT);
+ OUT_RING(seqno);
+ OUT_RING(0);
+ PIPE_CONTROL_FLUSH(scratch_addr);
+ scratch_addr += 128; /* write to separate cachelines */
+ PIPE_CONTROL_FLUSH(scratch_addr);
+ scratch_addr += 128;
+ PIPE_CONTROL_FLUSH(scratch_addr);
+ scratch_addr += 128;
+ PIPE_CONTROL_FLUSH(scratch_addr);
+ scratch_addr += 128;
+ PIPE_CONTROL_FLUSH(scratch_addr);
+ scratch_addr += 128;
+ PIPE_CONTROL_FLUSH(scratch_addr);
+ OUT_RING(GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE |
+ PIPE_CONTROL_WC_FLUSH | PIPE_CONTROL_TC_FLUSH |
+ PIPE_CONTROL_NOTIFY);
+ OUT_RING(dev_priv->seqno_gfx_addr | PIPE_CONTROL_GLOBAL_GTT);
+ OUT_RING(seqno);
+ OUT_RING(0);
+ ADVANCE_LP_RING();
+ } else {
+ BEGIN_LP_RING(4);
+ OUT_RING(MI_STORE_DWORD_INDEX);
+ OUT_RING(I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
+ OUT_RING(seqno);
+
+ OUT_RING(MI_USER_INTERRUPT);
+ ADVANCE_LP_RING();
+ }
+ return seqno;
+}
+
+static u32
+render_ring_get_gem_seqno(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ if (HAS_PIPE_CONTROL(dev))
+ return ((volatile u32 *)(dev_priv->seqno_page))[0];
+ else
+ return intel_read_status_page(ring, I915_GEM_HWS_INDEX);
+}
+
+static void
+render_ring_get_user_irq(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ unsigned long irqflags;
+
+ spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
+ if (dev->irq_enabled && (++ring->user_irq_refcount == 1)) {
+ if (HAS_PCH_SPLIT(dev))
+ ironlake_enable_graphics_irq(dev_priv, GT_PIPE_NOTIFY);
+ else
+ i915_enable_irq(dev_priv, I915_USER_INTERRUPT);
+ }
+ spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
+}
+
+static void
+render_ring_put_user_irq(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ unsigned long irqflags;
+
+ spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
+ BUG_ON(dev->irq_enabled && ring->user_irq_refcount <= 0);
+ if (dev->irq_enabled && (--ring->user_irq_refcount == 0)) {
+ if (HAS_PCH_SPLIT(dev))
+ ironlake_disable_graphics_irq(dev_priv, GT_PIPE_NOTIFY);
+ else
+ i915_disable_irq(dev_priv, I915_USER_INTERRUPT);
+ }
+ spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
+}
+
+static void render_setup_status_page(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ if (IS_GEN6(dev)) {
+ I915_WRITE(HWS_PGA_GEN6, ring->status_page.gfx_addr);
+ I915_READ(HWS_PGA_GEN6); /* posting read */
+ } else {
+ I915_WRITE(HWS_PGA, ring->status_page.gfx_addr);
+ I915_READ(HWS_PGA); /* posting read */
+ }
+
+}
+
+void
+bsd_ring_flush(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ u32 invalidate_domains,
+ u32 flush_domains)
+{
+ intel_ring_begin(dev, ring, 2);
+ intel_ring_emit(dev, ring, MI_FLUSH);
+ intel_ring_emit(dev, ring, MI_NOOP);
+ intel_ring_advance(dev, ring);
+}
+
+static inline unsigned int bsd_ring_get_head(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ return I915_READ(BSD_RING_HEAD) & HEAD_ADDR;
+}
+
+static inline unsigned int bsd_ring_get_tail(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ return I915_READ(BSD_RING_TAIL) & TAIL_ADDR;
+}
+
+static inline unsigned int bsd_ring_get_active_head(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ return I915_READ(BSD_RING_ACTHD);
+}
+
+static inline void bsd_ring_advance_ring(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ I915_WRITE(BSD_RING_TAIL, ring->tail);
+}
+
+static int init_bsd_ring(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ return init_ring_common(dev, ring);
+}
+
+static u32
+bsd_ring_add_request(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ struct drm_file *file_priv,
+ u32 flush_domains)
+{
+ u32 seqno;
+ seqno = intel_ring_get_seqno(dev, ring);
+ intel_ring_begin(dev, ring, 4);
+ intel_ring_emit(dev, ring, MI_STORE_DWORD_INDEX);
+ intel_ring_emit(dev, ring,
+ I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
+ intel_ring_emit(dev, ring, seqno);
+ intel_ring_emit(dev, ring, MI_USER_INTERRUPT);
+ intel_ring_advance(dev, ring);
+
+ DRM_DEBUG_DRIVER("%s %d\n", ring->name, seqno);
+
+ return seqno;
+}
+
+static void bsd_setup_status_page(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ I915_WRITE(BSD_HWS_PGA, ring->status_page.gfx_addr);
+ I915_READ(BSD_HWS_PGA);
+}
+
+static void
+bsd_ring_get_user_irq(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ /* do nothing */
+}
+static void
+bsd_ring_put_user_irq(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ /* do nothing */
+}
+
+static u32
+bsd_ring_get_gem_seqno(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ return intel_read_status_page(ring, I915_GEM_HWS_INDEX);
+}
+
+static int
+bsd_ring_dispatch_gem_execbuffer(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ struct drm_i915_gem_execbuffer2 *exec,
+ struct drm_clip_rect *cliprects,
+ uint64_t exec_offset)
+{
+ uint32_t exec_start;
+ exec_start = (uint32_t) exec_offset + exec->batch_start_offset;
+ intel_ring_begin(dev, ring, 2);
+ intel_ring_emit(dev, ring, MI_BATCH_BUFFER_START |
+ (2 << 6) | MI_BATCH_NON_SECURE_I965);
+ intel_ring_emit(dev, ring, exec_start);
+ intel_ring_advance(dev, ring);
+ return 0;
+}
+
+
+static int
+render_ring_dispatch_gem_execbuffer(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ struct drm_i915_gem_execbuffer2 *exec,
+ struct drm_clip_rect *cliprects,
+ uint64_t exec_offset)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ int nbox = exec->num_cliprects;
+ int i = 0, count;
+ uint32_t exec_start, exec_len;
+ exec_start = (uint32_t) exec_offset + exec->batch_start_offset;
+ exec_len = (uint32_t) exec->batch_len;
+
+ trace_i915_gem_request_submit(dev, dev_priv->mm.next_gem_seqno + 1);
+
+ count = nbox ? nbox : 1;
+
+ for (i = 0; i < count; i++) {
+ if (i < nbox) {
+ int ret = i915_emit_box(dev, cliprects, i,
+ exec->DR1, exec->DR4);
+ if (ret)
+ return ret;
+ }
+
+ if (IS_I830(dev) || IS_845G(dev)) {
+ intel_ring_begin(dev, ring, 4);
+ intel_ring_emit(dev, ring, MI_BATCH_BUFFER);
+ intel_ring_emit(dev, ring,
+ exec_start | MI_BATCH_NON_SECURE);
+ intel_ring_emit(dev, ring, exec_start + exec_len - 4);
+ intel_ring_emit(dev, ring, 0);
+ } else {
+ intel_ring_begin(dev, ring, 4);
+ if (IS_I965G(dev)) {
+ intel_ring_emit(dev, ring,
+ MI_BATCH_BUFFER_START | (2 << 6)
+ | MI_BATCH_NON_SECURE_I965);
+ intel_ring_emit(dev, ring, exec_start);
+ } else {
+ intel_ring_emit(dev, ring, MI_BATCH_BUFFER_START
+ | (2 << 6));
+ intel_ring_emit(dev, ring, exec_start |
+ MI_BATCH_NON_SECURE);
+ }
+ }
+ intel_ring_advance(dev, ring);
+ }
+
+ /* XXX breadcrumb */
+ return 0;
+}
+
+static void cleanup_status_page(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_gem_object *obj;
+ struct drm_i915_gem_object *obj_priv;
+
+ obj = ring->status_page.obj;
+ if (obj == NULL)
+ return;
+ obj_priv = to_intel_bo(obj);
+
+ kunmap(obj_priv->pages[0]);
+ i915_gem_object_unpin(obj);
+ drm_gem_object_unreference(obj);
+ ring->status_page.obj = NULL;
+
+ memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
+}
+
+static int init_status_page(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_gem_object *obj;
+ struct drm_i915_gem_object *obj_priv;
+ int ret;
+
+ obj = i915_gem_alloc_object(dev, 4096);
+ if (obj == NULL) {
+ DRM_ERROR("Failed to allocate status page\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+ obj_priv = to_intel_bo(obj);
+ obj_priv->agp_type = AGP_USER_CACHED_MEMORY;
+
+ ret = i915_gem_object_pin(obj, 4096);
+ if (ret != 0) {
+ goto err_unref;
+ }
+
+ ring->status_page.gfx_addr = obj_priv->gtt_offset;
+ ring->status_page.page_addr = kmap(obj_priv->pages[0]);
+ if (ring->status_page.page_addr == NULL) {
+ memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
+ goto err_unpin;
+ }
+ ring->status_page.obj = obj;
+ memset(ring->status_page.page_addr, 0, PAGE_SIZE);
+
+ ring->setup_status_page(dev, ring);
+ DRM_DEBUG_DRIVER("%s hws offset: 0x%08x\n",
+ ring->name, ring->status_page.gfx_addr);
+
+ return 0;
+
+err_unpin:
+ i915_gem_object_unpin(obj);
+err_unref:
+ drm_gem_object_unreference(obj);
+err:
+ return ret;
+}
+
+
+int intel_init_ring_buffer(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ int ret;
+ struct drm_i915_gem_object *obj_priv;
+ struct drm_gem_object *obj;
+ ring->dev = dev;
+
+ if (I915_NEED_GFX_HWS(dev)) {
+ ret = init_status_page(dev, ring);
+ if (ret)
+ return ret;
+ }
+
+ obj = i915_gem_alloc_object(dev, ring->size);
+ if (obj == NULL) {
+ DRM_ERROR("Failed to allocate ringbuffer\n");
+ ret = -ENOMEM;
+ goto cleanup;
+ }
+
+ ring->gem_object = obj;
+
+ ret = i915_gem_object_pin(obj, ring->alignment);
+ if (ret != 0) {
+ drm_gem_object_unreference(obj);
+ goto cleanup;
+ }
+
+ obj_priv = to_intel_bo(obj);
+ ring->map.size = ring->size;
+ ring->map.offset = dev->agp->base + obj_priv->gtt_offset;
+ ring->map.type = 0;
+ ring->map.flags = 0;
+ ring->map.mtrr = 0;
+
+ drm_core_ioremap_wc(&ring->map, dev);
+ if (ring->map.handle == NULL) {
+ DRM_ERROR("Failed to map ringbuffer.\n");
+ i915_gem_object_unpin(obj);
+ drm_gem_object_unreference(obj);
+ ret = -EINVAL;
+ goto cleanup;
+ }
+
+ ring->virtual_start = ring->map.handle;
+ ret = ring->init(dev, ring);
+ if (ret != 0) {
+ intel_cleanup_ring_buffer(dev, ring);
+ return ret;
+ }
+
+ if (!drm_core_check_feature(dev, DRIVER_MODESET))
+ i915_kernel_lost_context(dev);
+ else {
+ ring->head = ring->get_head(dev, ring);
+ ring->tail = ring->get_tail(dev, ring);
+ ring->space = ring->head - (ring->tail + 8);
+ if (ring->space < 0)
+ ring->space += ring->size;
+ }
+ INIT_LIST_HEAD(&ring->active_list);
+ INIT_LIST_HEAD(&ring->request_list);
+ return ret;
+cleanup:
+ cleanup_status_page(dev, ring);
+ return ret;
+}
+
+void intel_cleanup_ring_buffer(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ if (ring->gem_object == NULL)
+ return;
+
+ drm_core_ioremapfree(&ring->map, dev);
+
+ i915_gem_object_unpin(ring->gem_object);
+ drm_gem_object_unreference(ring->gem_object);
+ ring->gem_object = NULL;
+ cleanup_status_page(dev, ring);
+}
+
+int intel_wrap_ring_buffer(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ unsigned int *virt;
+ int rem;
+ rem = ring->size - ring->tail;
+
+ if (ring->space < rem) {
+ int ret = intel_wait_ring_buffer(dev, ring, rem);
+ if (ret)
+ return ret;
+ }
+
+ virt = (unsigned int *)(ring->virtual_start + ring->tail);
+ rem /= 4;
+ while (rem--)
+ *virt++ = MI_NOOP;
+
+ ring->tail = 0;
+ ring->space = ring->head - 8;
+
+ return 0;
+}
+
+int intel_wait_ring_buffer(struct drm_device *dev,
+ struct intel_ring_buffer *ring, int n)
+{
+ unsigned long end;
+
+ trace_i915_ring_wait_begin (dev);
+ end = jiffies + 3 * HZ;
+ do {
+ ring->head = ring->get_head(dev, ring);
+ ring->space = ring->head - (ring->tail + 8);
+ if (ring->space < 0)
+ ring->space += ring->size;
+ if (ring->space >= n) {
+ trace_i915_ring_wait_end (dev);
+ return 0;
+ }
+
+ if (dev->primary->master) {
+ struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
+ if (master_priv->sarea_priv)
+ master_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT;
+ }
+
+ yield();
+ } while (!time_after(jiffies, end));
+ trace_i915_ring_wait_end (dev);
+ return -EBUSY;
+}
+
+void intel_ring_begin(struct drm_device *dev,
+ struct intel_ring_buffer *ring, int num_dwords)
+{
+ int n = 4*num_dwords;
+ if (unlikely(ring->tail + n > ring->size))
+ intel_wrap_ring_buffer(dev, ring);
+ if (unlikely(ring->space < n))
+ intel_wait_ring_buffer(dev, ring, n);
+}
+
+void intel_ring_emit(struct drm_device *dev,
+ struct intel_ring_buffer *ring, unsigned int data)
+{
+ unsigned int *virt = ring->virtual_start + ring->tail;
+ *virt = data;
+ ring->tail += 4;
+ ring->tail &= ring->size - 1;
+ ring->space -= 4;
+}
+
+void intel_ring_advance(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ ring->advance_ring(dev, ring);
+}
+
+void intel_fill_struct(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ void *data,
+ unsigned int len)
+{
+ unsigned int *virt = ring->virtual_start + ring->tail;
+ BUG_ON((len&~(4-1)) != 0);
+ intel_ring_begin(dev, ring, len/4);
+ memcpy(virt, data, len);
+ ring->tail += len;
+ ring->tail &= ring->size - 1;
+ ring->space -= len;
+ intel_ring_advance(dev, ring);
+}
+
+u32 intel_ring_get_seqno(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ u32 seqno;
+ seqno = ring->next_seqno;
+
+ /* reserve 0 for non-seqno */
+ if (++ring->next_seqno == 0)
+ ring->next_seqno = 1;
+ return seqno;
+}
+
+struct intel_ring_buffer render_ring = {
+ .name = "render ring",
+ .regs = {
+ .ctl = PRB0_CTL,
+ .head = PRB0_HEAD,
+ .tail = PRB0_TAIL,
+ .start = PRB0_START
+ },
+ .ring_flag = I915_EXEC_RENDER,
+ .size = 32 * PAGE_SIZE,
+ .alignment = PAGE_SIZE,
+ .virtual_start = NULL,
+ .dev = NULL,
+ .gem_object = NULL,
+ .head = 0,
+ .tail = 0,
+ .space = 0,
+ .next_seqno = 1,
+ .user_irq_refcount = 0,
+ .irq_gem_seqno = 0,
+ .waiting_gem_seqno = 0,
+ .setup_status_page = render_setup_status_page,
+ .init = init_render_ring,
+ .get_head = render_ring_get_head,
+ .get_tail = render_ring_get_tail,
+ .get_active_head = render_ring_get_active_head,
+ .advance_ring = render_ring_advance_ring,
+ .flush = render_ring_flush,
+ .add_request = render_ring_add_request,
+ .get_gem_seqno = render_ring_get_gem_seqno,
+ .user_irq_get = render_ring_get_user_irq,
+ .user_irq_put = render_ring_put_user_irq,
+ .dispatch_gem_execbuffer = render_ring_dispatch_gem_execbuffer,
+ .status_page = {NULL, 0, NULL},
+ .map = {0,}
+};
+
+/* ring buffer for bit-stream decoder */
+
+struct intel_ring_buffer bsd_ring = {
+ .name = "bsd ring",
+ .regs = {
+ .ctl = BSD_RING_CTL,
+ .head = BSD_RING_HEAD,
+ .tail = BSD_RING_TAIL,
+ .start = BSD_RING_START
+ },
+ .ring_flag = I915_EXEC_BSD,
+ .size = 32 * PAGE_SIZE,
+ .alignment = PAGE_SIZE,
+ .virtual_start = NULL,
+ .dev = NULL,
+ .gem_object = NULL,
+ .head = 0,
+ .tail = 0,
+ .space = 0,
+ .next_seqno = 1,
+ .user_irq_refcount = 0,
+ .irq_gem_seqno = 0,
+ .waiting_gem_seqno = 0,
+ .setup_status_page = bsd_setup_status_page,
+ .init = init_bsd_ring,
+ .get_head = bsd_ring_get_head,
+ .get_tail = bsd_ring_get_tail,
+ .get_active_head = bsd_ring_get_active_head,
+ .advance_ring = bsd_ring_advance_ring,
+ .flush = bsd_ring_flush,
+ .add_request = bsd_ring_add_request,
+ .get_gem_seqno = bsd_ring_get_gem_seqno,
+ .user_irq_get = bsd_ring_get_user_irq,
+ .user_irq_put = bsd_ring_put_user_irq,
+ .dispatch_gem_execbuffer = bsd_ring_dispatch_gem_execbuffer,
+ .status_page = {NULL, 0, NULL},
+ .map = {0,}
+};
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
new file mode 100644
index 0000000..d5568d3
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -0,0 +1,124 @@
+#ifndef _INTEL_RINGBUFFER_H_
+#define _INTEL_RINGBUFFER_H_
+
+struct intel_hw_status_page {
+ void *page_addr;
+ unsigned int gfx_addr;
+ struct drm_gem_object *obj;
+};
+
+struct drm_i915_gem_execbuffer2;
+struct intel_ring_buffer {
+ const char *name;
+ struct ring_regs {
+ u32 ctl;
+ u32 head;
+ u32 tail;
+ u32 start;
+ } regs;
+ unsigned int ring_flag;
+ unsigned long size;
+ unsigned int alignment;
+ void *virtual_start;
+ struct drm_device *dev;
+ struct drm_gem_object *gem_object;
+
+ unsigned int head;
+ unsigned int tail;
+ unsigned int space;
+ u32 next_seqno;
+ struct intel_hw_status_page status_page;
+
+ u32 irq_gem_seqno; /* last seq seem at irq time */
+ u32 waiting_gem_seqno;
+ int user_irq_refcount;
+ void (*user_irq_get)(struct drm_device *dev,
+ struct intel_ring_buffer *ring);
+ void (*user_irq_put)(struct drm_device *dev,
+ struct intel_ring_buffer *ring);
+ void (*setup_status_page)(struct drm_device *dev,
+ struct intel_ring_buffer *ring);
+
+ int (*init)(struct drm_device *dev,
+ struct intel_ring_buffer *ring);
+
+ unsigned int (*get_head)(struct drm_device *dev,
+ struct intel_ring_buffer *ring);
+ unsigned int (*get_tail)(struct drm_device *dev,
+ struct intel_ring_buffer *ring);
+ unsigned int (*get_active_head)(struct drm_device *dev,
+ struct intel_ring_buffer *ring);
+ void (*advance_ring)(struct drm_device *dev,
+ struct intel_ring_buffer *ring);
+ void (*flush)(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ u32 invalidate_domains,
+ u32 flush_domains);
+ u32 (*add_request)(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ struct drm_file *file_priv,
+ u32 flush_domains);
+ u32 (*get_gem_seqno)(struct drm_device *dev,
+ struct intel_ring_buffer *ring);
+ int (*dispatch_gem_execbuffer)(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ struct drm_i915_gem_execbuffer2 *exec,
+ struct drm_clip_rect *cliprects,
+ uint64_t exec_offset);
+
+ /**
+ * List of objects currently involved in rendering from the
+ * ringbuffer.
+ *
+ * Includes buffers having the contents of their GPU caches
+ * flushed, not necessarily primitives. last_rendering_seqno
+ * represents when the rendering involved will be completed.
+ *
+ * A reference is held on the buffer while on this list.
+ */
+ struct list_head active_list;
+
+ /**
+ * List of breadcrumbs associated with GPU requests currently
+ * outstanding.
+ */
+ struct list_head request_list;
+
+ wait_queue_head_t irq_queue;
+ drm_local_map_t map;
+};
+
+static inline u32
+intel_read_status_page(struct intel_ring_buffer *ring,
+ int reg)
+{
+ u32 *regs = ring->status_page.page_addr;
+ return regs[reg];
+}
+
+int intel_init_ring_buffer(struct drm_device *dev,
+ struct intel_ring_buffer *ring);
+void intel_cleanup_ring_buffer(struct drm_device *dev,
+ struct intel_ring_buffer *ring);
+int intel_wait_ring_buffer(struct drm_device *dev,
+ struct intel_ring_buffer *ring, int n);
+int intel_wrap_ring_buffer(struct drm_device *dev,
+ struct intel_ring_buffer *ring);
+void intel_ring_begin(struct drm_device *dev,
+ struct intel_ring_buffer *ring, int n);
+void intel_ring_emit(struct drm_device *dev,
+ struct intel_ring_buffer *ring, u32 data);
+void intel_fill_struct(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ void *data,
+ unsigned int len);
+void intel_ring_advance(struct drm_device *dev,
+ struct intel_ring_buffer *ring);
+
+u32 intel_ring_get_seqno(struct drm_device *dev,
+ struct intel_ring_buffer *ring);
+
+extern struct intel_ring_buffer render_ring;
+extern struct intel_ring_buffer bsd_ring;
+
+#endif /* _INTEL_RINGBUFFER_H_ */
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index aba72c4..76993ac 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1479,7 +1479,7 @@
intel_encoder = enc_to_intel_encoder(encoder);
if (intel_encoder->type == INTEL_OUTPUT_ANALOG) {
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- if (connector && encoder == intel_attached_encoder(connector))
+ if (encoder == intel_attached_encoder(connector))
return connector;
}
}
diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c
index e13f6af..d4bcca8 100644
--- a/drivers/gpu/drm/nouveau/nouveau_acpi.c
+++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c
@@ -34,7 +34,7 @@
static struct nouveau_dsm_priv {
bool dsm_detected;
acpi_handle dhandle;
- acpi_handle dsm_handle;
+ acpi_handle rom_handle;
} nouveau_dsm_priv;
static const char nouveau_dsm_muid[] = {
@@ -107,9 +107,9 @@
static int nouveau_dsm_switchto(enum vga_switcheroo_client_id id)
{
if (id == VGA_SWITCHEROO_IGD)
- return nouveau_dsm_switch_mux(nouveau_dsm_priv.dsm_handle, NOUVEAU_DSM_LED_STAMINA);
+ return nouveau_dsm_switch_mux(nouveau_dsm_priv.dhandle, NOUVEAU_DSM_LED_STAMINA);
else
- return nouveau_dsm_switch_mux(nouveau_dsm_priv.dsm_handle, NOUVEAU_DSM_LED_SPEED);
+ return nouveau_dsm_switch_mux(nouveau_dsm_priv.dhandle, NOUVEAU_DSM_LED_SPEED);
}
static int nouveau_dsm_power_state(enum vga_switcheroo_client_id id,
@@ -118,7 +118,7 @@
if (id == VGA_SWITCHEROO_IGD)
return 0;
- return nouveau_dsm_set_discrete_state(nouveau_dsm_priv.dsm_handle, state);
+ return nouveau_dsm_set_discrete_state(nouveau_dsm_priv.dhandle, state);
}
static int nouveau_dsm_init(void)
@@ -151,18 +151,18 @@
dhandle = DEVICE_ACPI_HANDLE(&pdev->dev);
if (!dhandle)
return false;
+
status = acpi_get_handle(dhandle, "_DSM", &nvidia_handle);
if (ACPI_FAILURE(status)) {
return false;
}
- ret= nouveau_dsm(nvidia_handle, NOUVEAU_DSM_SUPPORTED,
- NOUVEAU_DSM_SUPPORTED_FUNCTIONS, &result);
+ ret = nouveau_dsm(dhandle, NOUVEAU_DSM_SUPPORTED,
+ NOUVEAU_DSM_SUPPORTED_FUNCTIONS, &result);
if (ret < 0)
return false;
nouveau_dsm_priv.dhandle = dhandle;
- nouveau_dsm_priv.dsm_handle = nvidia_handle;
return true;
}
@@ -173,6 +173,7 @@
struct pci_dev *pdev = NULL;
int has_dsm = 0;
int vga_count = 0;
+
while ((pdev = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, pdev)) != NULL) {
vga_count++;
@@ -180,7 +181,7 @@
}
if (vga_count == 2 && has_dsm) {
- acpi_get_name(nouveau_dsm_priv.dsm_handle, ACPI_FULL_PATHNAME, &buffer);
+ acpi_get_name(nouveau_dsm_priv.dhandle, ACPI_FULL_PATHNAME, &buffer);
printk(KERN_INFO "VGA switcheroo: detected DSM switching method %s handle\n",
acpi_method_name);
nouveau_dsm_priv.dsm_detected = true;
@@ -204,3 +205,57 @@
{
vga_switcheroo_unregister_handler();
}
+
+/* retrieve the ROM in 4k blocks */
+static int nouveau_rom_call(acpi_handle rom_handle, uint8_t *bios,
+ int offset, int len)
+{
+ acpi_status status;
+ union acpi_object rom_arg_elements[2], *obj;
+ struct acpi_object_list rom_arg;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL};
+
+ rom_arg.count = 2;
+ rom_arg.pointer = &rom_arg_elements[0];
+
+ rom_arg_elements[0].type = ACPI_TYPE_INTEGER;
+ rom_arg_elements[0].integer.value = offset;
+
+ rom_arg_elements[1].type = ACPI_TYPE_INTEGER;
+ rom_arg_elements[1].integer.value = len;
+
+ status = acpi_evaluate_object(rom_handle, NULL, &rom_arg, &buffer);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_INFO "failed to evaluate ROM got %s\n", acpi_format_exception(status));
+ return -ENODEV;
+ }
+ obj = (union acpi_object *)buffer.pointer;
+ memcpy(bios+offset, obj->buffer.pointer, len);
+ kfree(buffer.pointer);
+ return len;
+}
+
+bool nouveau_acpi_rom_supported(struct pci_dev *pdev)
+{
+ acpi_status status;
+ acpi_handle dhandle, rom_handle;
+
+ if (!nouveau_dsm_priv.dsm_detected)
+ return false;
+
+ dhandle = DEVICE_ACPI_HANDLE(&pdev->dev);
+ if (!dhandle)
+ return false;
+
+ status = acpi_get_handle(dhandle, "_ROM", &rom_handle);
+ if (ACPI_FAILURE(status))
+ return false;
+
+ nouveau_dsm_priv.rom_handle = rom_handle;
+ return true;
+}
+
+int nouveau_acpi_get_bios_chunk(uint8_t *bios, int offset, int len)
+{
+ return nouveau_rom_call(nouveau_dsm_priv.rom_handle, bios, offset, len);
+}
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index e7e69cc..e492919 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -178,41 +178,51 @@
pci_disable_rom(dev->pdev);
}
+static void load_vbios_acpi(struct drm_device *dev, uint8_t *data)
+{
+ int i;
+ int ret;
+ int size = 64 * 1024;
+
+ if (!nouveau_acpi_rom_supported(dev->pdev))
+ return;
+
+ for (i = 0; i < (size / ROM_BIOS_PAGE); i++) {
+ ret = nouveau_acpi_get_bios_chunk(data,
+ (i * ROM_BIOS_PAGE),
+ ROM_BIOS_PAGE);
+ if (ret <= 0)
+ break;
+ }
+ return;
+}
+
struct methods {
const char desc[8];
void (*loadbios)(struct drm_device *, uint8_t *);
const bool rw;
};
-static struct methods nv04_methods[] = {
- { "PROM", load_vbios_prom, false },
- { "PRAMIN", load_vbios_pramin, true },
- { "PCIROM", load_vbios_pci, true },
-};
-
-static struct methods nv50_methods[] = {
+static struct methods shadow_methods[] = {
{ "PRAMIN", load_vbios_pramin, true },
{ "PROM", load_vbios_prom, false },
{ "PCIROM", load_vbios_pci, true },
+ { "ACPI", load_vbios_acpi, true },
};
-#define METHODCNT 3
-
static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data)
{
- struct drm_nouveau_private *dev_priv = dev->dev_private;
- struct methods *methods;
- int i;
+ const int nr_methods = ARRAY_SIZE(shadow_methods);
+ struct methods *methods = shadow_methods;
int testscore = 3;
- int scores[METHODCNT];
+ int scores[nr_methods], i;
if (nouveau_vbios) {
- methods = nv04_methods;
- for (i = 0; i < METHODCNT; i++)
+ for (i = 0; i < nr_methods; i++)
if (!strcasecmp(nouveau_vbios, methods[i].desc))
break;
- if (i < METHODCNT) {
+ if (i < nr_methods) {
NV_INFO(dev, "Attempting to use BIOS image from %s\n",
methods[i].desc);
@@ -224,12 +234,7 @@
NV_ERROR(dev, "VBIOS source \'%s\' invalid\n", nouveau_vbios);
}
- if (dev_priv->card_type < NV_50)
- methods = nv04_methods;
- else
- methods = nv50_methods;
-
- for (i = 0; i < METHODCNT; i++) {
+ for (i = 0; i < nr_methods; i++) {
NV_TRACE(dev, "Attempting to load BIOS image from %s\n",
methods[i].desc);
data[0] = data[1] = 0; /* avoid reuse of previous image */
@@ -240,7 +245,7 @@
}
while (--testscore > 0) {
- for (i = 0; i < METHODCNT; i++) {
+ for (i = 0; i < nr_methods; i++) {
if (scores[i] == testscore) {
NV_TRACE(dev, "Using BIOS image from %s\n",
methods[i].desc);
@@ -814,7 +819,7 @@
if (i2c_index == 0x81)
i2c_index = (dcb->i2c_default_indices & 0xf0) >> 4;
- if (i2c_index > DCB_MAX_NUM_I2C_ENTRIES) {
+ if (i2c_index >= DCB_MAX_NUM_I2C_ENTRIES) {
NV_ERROR(dev, "invalid i2c_index 0x%x\n", i2c_index);
return NULL;
}
@@ -2807,7 +2812,10 @@
BIOSLOG(bios, "0x%04X: Entry: 0x%08X\n", offset, gpio->entry);
- nv50_gpio_set(bios->dev, gpio->tag, gpio->state_default);
+ BIOSLOG(bios, "0x%04X: set gpio 0x%02x, state %d\n",
+ offset, gpio->tag, gpio->state_default);
+ if (bios->execute)
+ nv50_gpio_set(bios->dev, gpio->tag, gpio->state_default);
/* The NVIDIA binary driver doesn't appear to actually do
* any of this, my VBIOS does however.
@@ -3897,7 +3905,8 @@
static uint8_t *
bios_output_config_match(struct drm_device *dev, struct dcb_entry *dcbent,
- uint16_t record, int record_len, int record_nr)
+ uint16_t record, int record_len, int record_nr,
+ bool match_link)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nvbios *bios = &dev_priv->vbios;
@@ -3905,12 +3914,28 @@
uint16_t table;
int i, v;
+ switch (dcbent->type) {
+ case OUTPUT_TMDS:
+ case OUTPUT_LVDS:
+ case OUTPUT_DP:
+ break;
+ default:
+ match_link = false;
+ break;
+ }
+
for (i = 0; i < record_nr; i++, record += record_len) {
table = ROM16(bios->data[record]);
if (!table)
continue;
entry = ROM32(bios->data[table]);
+ if (match_link) {
+ v = (entry & 0x00c00000) >> 22;
+ if (!(v & dcbent->sorconf.link))
+ continue;
+ }
+
v = (entry & 0x000f0000) >> 16;
if (!(v & dcbent->or))
continue;
@@ -3952,7 +3977,7 @@
*length = table[4];
return bios_output_config_match(dev, dcbent,
bios->display.dp_table_ptr + table[1],
- table[2], table[3]);
+ table[2], table[3], table[0] >= 0x21);
}
int
@@ -4041,7 +4066,7 @@
dcbent->type, dcbent->location, dcbent->or);
otable = bios_output_config_match(dev, dcbent, table[1] +
bios->display.script_table_ptr,
- table[2], table[3]);
+ table[2], table[3], table[0] >= 0x21);
if (!otable) {
NV_ERROR(dev, "Couldn't find matching output script table\n");
return 1;
@@ -5533,12 +5558,6 @@
entry->bus = (conn >> 16) & 0xf;
entry->location = (conn >> 20) & 0x3;
entry->or = (conn >> 24) & 0xf;
- /*
- * Normal entries consist of a single bit, but dual link has the
- * next most significant bit set too
- */
- entry->duallink_possible =
- ((1 << (ffs(entry->or) - 1)) * 3 == entry->or);
switch (entry->type) {
case OUTPUT_ANALOG:
@@ -5622,6 +5641,16 @@
break;
}
+ if (dcb->version < 0x40) {
+ /* Normal entries consist of a single bit, but dual link has
+ * the next most significant bit set too
+ */
+ entry->duallink_possible =
+ ((1 << (ffs(entry->or) - 1)) * 3 == entry->or);
+ } else {
+ entry->duallink_possible = (entry->sorconf.link == 3);
+ }
+
/* unsure what DCB version introduces this, 3.0? */
if (conf & 0x100000)
entry->i2c_upper_default = true;
@@ -6205,6 +6234,30 @@
nouveau_i2c_fini(dev, entry);
}
+static bool
+nouveau_bios_posted(struct drm_device *dev)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ bool was_locked;
+ unsigned htotal;
+
+ if (dev_priv->chipset >= NV_50) {
+ if (NVReadVgaCrtc(dev, 0, 0x00) == 0 &&
+ NVReadVgaCrtc(dev, 0, 0x1a) == 0)
+ return false;
+ return true;
+ }
+
+ was_locked = NVLockVgaCrtcs(dev, false);
+ htotal = NVReadVgaCrtc(dev, 0, 0x06);
+ htotal |= (NVReadVgaCrtc(dev, 0, 0x07) & 0x01) << 8;
+ htotal |= (NVReadVgaCrtc(dev, 0, 0x07) & 0x20) << 4;
+ htotal |= (NVReadVgaCrtc(dev, 0, 0x25) & 0x01) << 10;
+ htotal |= (NVReadVgaCrtc(dev, 0, 0x41) & 0x01) << 11;
+ NVLockVgaCrtcs(dev, was_locked);
+ return (htotal != 0);
+}
+
int
nouveau_bios_init(struct drm_device *dev)
{
@@ -6239,11 +6292,9 @@
bios->execute = false;
/* ... unless card isn't POSTed already */
- if (dev_priv->card_type >= NV_10 &&
- NVReadVgaCrtc(dev, 0, 0x00) == 0 &&
- NVReadVgaCrtc(dev, 0, 0x1a) == 0) {
+ if (!nouveau_bios_posted(dev)) {
NV_INFO(dev, "Adaptor not initialised\n");
- if (dev_priv->card_type < NV_50) {
+ if (dev_priv->card_type < NV_40) {
NV_ERROR(dev, "Unable to POST this chipset\n");
return -ENODEV;
}
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 7e663a7..149ed22 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -241,7 +241,8 @@
if (nv_encoder && nv_connector->native_mode) {
unsigned status = connector_status_connected;
-#ifdef CONFIG_ACPI
+#if defined(CONFIG_ACPI_BUTTON) || \
+ (defined(CONFIG_ACPI_BUTTON_MODULE) && defined(MODULE))
if (!nouveau_ignorelid && !acpi_lid_open())
status = connector_status_unknown;
#endif
@@ -431,24 +432,27 @@
}
static struct drm_display_mode *
-nouveau_connector_native_mode(struct nouveau_connector *connector)
+nouveau_connector_native_mode(struct drm_connector *connector)
{
- struct drm_device *dev = connector->base.dev;
+ struct drm_connector_helper_funcs *helper = connector->helper_private;
+ struct nouveau_connector *nv_connector = nouveau_connector(connector);
+ struct drm_device *dev = connector->dev;
struct drm_display_mode *mode, *largest = NULL;
int high_w = 0, high_h = 0, high_v = 0;
- /* Use preferred mode if there is one.. */
- list_for_each_entry(mode, &connector->base.probed_modes, head) {
+ list_for_each_entry(mode, &nv_connector->base.probed_modes, head) {
+ if (helper->mode_valid(connector, mode) != MODE_OK)
+ continue;
+
+ /* Use preferred mode if there is one.. */
if (mode->type & DRM_MODE_TYPE_PREFERRED) {
NV_DEBUG_KMS(dev, "native mode from preferred\n");
return drm_mode_duplicate(dev, mode);
}
- }
- /* Otherwise, take the resolution with the largest width, then height,
- * then vertical refresh
- */
- list_for_each_entry(mode, &connector->base.probed_modes, head) {
+ /* Otherwise, take the resolution with the largest width, then
+ * height, then vertical refresh
+ */
if (mode->hdisplay < high_w)
continue;
@@ -552,7 +556,7 @@
*/
if (!nv_connector->native_mode)
nv_connector->native_mode =
- nouveau_connector_native_mode(nv_connector);
+ nouveau_connector_native_mode(connector);
if (ret == 0 && nv_connector->native_mode) {
struct drm_display_mode *mode;
@@ -583,9 +587,9 @@
switch (nv_encoder->dcb->type) {
case OUTPUT_LVDS:
- BUG_ON(!nv_connector->native_mode);
- if (mode->hdisplay > nv_connector->native_mode->hdisplay ||
- mode->vdisplay > nv_connector->native_mode->vdisplay)
+ if (nv_connector->native_mode &&
+ (mode->hdisplay > nv_connector->native_mode->hdisplay ||
+ mode->vdisplay > nv_connector->native_mode->vdisplay))
return MODE_PANEL;
min_clock = 0;
@@ -593,8 +597,7 @@
break;
case OUTPUT_TMDS:
if ((dev_priv->card_type >= NV_50 && !nouveau_duallink) ||
- (dev_priv->card_type < NV_50 &&
- !nv_encoder->dcb->duallink_possible))
+ !nv_encoder->dcb->duallink_possible)
max_clock = 165000;
else
max_clock = 330000;
@@ -728,7 +731,7 @@
if (ret == 0)
goto out;
nv_connector->detected_encoder = nv_encoder;
- nv_connector->native_mode = nouveau_connector_native_mode(nv_connector);
+ nv_connector->native_mode = nouveau_connector_native_mode(connector);
list_for_each_entry_safe(mode, temp, &connector->probed_modes, head)
drm_mode_remove(connector, mode);
diff --git a/drivers/gpu/drm/nouveau/nouveau_crtc.h b/drivers/gpu/drm/nouveau/nouveau_crtc.h
index 49fa7b2..cb1ce2a 100644
--- a/drivers/gpu/drm/nouveau/nouveau_crtc.h
+++ b/drivers/gpu/drm/nouveau/nouveau_crtc.h
@@ -40,6 +40,8 @@
int sharpness;
int last_dpms;
+ int cursor_saved_x, cursor_saved_y;
+
struct {
int cpp;
bool blanked;
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c
index c6079e3..2737704 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.c
@@ -175,6 +175,13 @@
nouveau_bo_unpin(nouveau_fb->nvbo);
}
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+
+ nouveau_bo_unmap(nv_crtc->cursor.nvbo);
+ nouveau_bo_unpin(nv_crtc->cursor.nvbo);
+ }
+
NV_INFO(dev, "Evicting buffers...\n");
ttm_bo_evict_mm(&dev_priv->ttm.bdev, TTM_PL_VRAM);
@@ -314,12 +321,34 @@
nouveau_bo_pin(nouveau_fb->nvbo, TTM_PL_FLAG_VRAM);
}
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+ int ret;
+
+ ret = nouveau_bo_pin(nv_crtc->cursor.nvbo, TTM_PL_FLAG_VRAM);
+ if (!ret)
+ ret = nouveau_bo_map(nv_crtc->cursor.nvbo);
+ if (ret)
+ NV_ERROR(dev, "Could not pin/map cursor.\n");
+ }
+
if (dev_priv->card_type < NV_50) {
nv04_display_restore(dev);
NVLockVgaCrtcs(dev, false);
} else
nv50_display_init(dev);
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+
+ nv_crtc->cursor.set_offset(nv_crtc,
+ nv_crtc->cursor.nvbo->bo.offset -
+ dev_priv->vm_vram_base);
+
+ nv_crtc->cursor.set_pos(nv_crtc, nv_crtc->cursor_saved_x,
+ nv_crtc->cursor_saved_y);
+ }
+
/* Force CLUT to get re-loaded during modeset */
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index 5b13443..c697191 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -851,12 +851,17 @@
extern int nouveau_dma_wait(struct nouveau_channel *, int slots, int size);
/* nouveau_acpi.c */
+#define ROM_BIOS_PAGE 4096
#if defined(CONFIG_ACPI)
void nouveau_register_dsm_handler(void);
void nouveau_unregister_dsm_handler(void);
+int nouveau_acpi_get_bios_chunk(uint8_t *bios, int offset, int len);
+bool nouveau_acpi_rom_supported(struct pci_dev *pdev);
#else
static inline void nouveau_register_dsm_handler(void) {}
static inline void nouveau_unregister_dsm_handler(void) {}
+static inline bool nouveau_acpi_rom_supported(struct pci_dev *pdev) { return false; }
+static inline int nouveau_acpi_get_bios_chunk(uint8_t *bios, int offset, int len) { return -EINVAL; }
#endif
/* nouveau_backlight.c */
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index fd4a2df..257ea13 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -377,6 +377,7 @@
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_fbdev *nfbdev;
+ int ret;
nfbdev = kzalloc(sizeof(struct nouveau_fbdev), GFP_KERNEL);
if (!nfbdev)
@@ -386,7 +387,13 @@
dev_priv->nfbdev = nfbdev;
nfbdev->helper.funcs = &nouveau_fbcon_helper_funcs;
- drm_fb_helper_init(dev, &nfbdev->helper, 2, 4);
+ ret = drm_fb_helper_init(dev, &nfbdev->helper,
+ nv_two_heads(dev) ? 2 : 1, 4);
+ if (ret) {
+ kfree(nfbdev);
+ return ret;
+ }
+
drm_fb_helper_single_add_all_connectors(&nfbdev->helper);
drm_fb_helper_initial_config(&nfbdev->helper, 32);
return 0;
diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c
index 775a701..c1fd42b 100644
--- a/drivers/gpu/drm/nouveau/nouveau_mem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_mem.c
@@ -540,7 +540,8 @@
dev_priv->vram_size = nv_rd32(dev, NV04_FIFO_DATA);
dev_priv->vram_size &= NV10_FIFO_DATA_RAM_AMOUNT_MB_MASK;
if (dev_priv->chipset == 0xaa || dev_priv->chipset == 0xac)
- dev_priv->vram_sys_base = nv_rd32(dev, 0x100e10) << 12;
+ dev_priv->vram_sys_base = nv_rd32(dev, 0x100e10);
+ dev_priv->vram_sys_base <<= 12;
}
NV_INFO(dev, "Detected %dMiB VRAM\n", (int)(dev_priv->vram_size >> 20));
diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c
index e632339..b02a231 100644
--- a/drivers/gpu/drm/nouveau/nouveau_state.c
+++ b/drivers/gpu/drm/nouveau/nouveau_state.c
@@ -376,12 +376,15 @@
static void nouveau_switcheroo_set_state(struct pci_dev *pdev,
enum vga_switcheroo_state state)
{
+ struct drm_device *dev = pci_get_drvdata(pdev);
pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
if (state == VGA_SWITCHEROO_ON) {
printk(KERN_ERR "VGA switcheroo: switched nouveau on\n");
nouveau_pci_resume(pdev);
+ drm_kms_helper_poll_enable(dev);
} else {
printk(KERN_ERR "VGA switcheroo: switched nouveau off\n");
+ drm_kms_helper_poll_disable(dev);
nouveau_pci_suspend(pdev, pmm);
}
}
@@ -776,29 +779,24 @@
return ret;
}
- /* map larger RAMIN aperture on NV40 cards */
- dev_priv->ramin = NULL;
+ /* Map PRAMIN BAR, or on older cards, the aperture withing BAR0 */
if (dev_priv->card_type >= NV_40) {
int ramin_bar = 2;
if (pci_resource_len(dev->pdev, ramin_bar) == 0)
ramin_bar = 3;
dev_priv->ramin_size = pci_resource_len(dev->pdev, ramin_bar);
- dev_priv->ramin = ioremap(
- pci_resource_start(dev->pdev, ramin_bar),
+ dev_priv->ramin =
+ ioremap(pci_resource_start(dev->pdev, ramin_bar),
dev_priv->ramin_size);
if (!dev_priv->ramin) {
- NV_ERROR(dev, "Failed to init RAMIN mapping, "
- "limited instance memory available\n");
+ NV_ERROR(dev, "Failed to PRAMIN BAR");
+ return -ENOMEM;
}
- }
-
- /* On older cards (or if the above failed), create a map covering
- * the BAR0 PRAMIN aperture */
- if (!dev_priv->ramin) {
+ } else {
dev_priv->ramin_size = 1 * 1024 * 1024;
dev_priv->ramin = ioremap(mmio_start_offs + NV_RAMIN,
- dev_priv->ramin_size);
+ dev_priv->ramin_size);
if (!dev_priv->ramin) {
NV_ERROR(dev, "Failed to map BAR0 PRAMIN.\n");
return -ENOMEM;
@@ -913,6 +911,9 @@
case NOUVEAU_GETPARAM_VM_VRAM_BASE:
getparam->value = dev_priv->vm_vram_base;
break;
+ case NOUVEAU_GETPARAM_PTIMER_TIME:
+ getparam->value = dev_priv->engine.timer.read(dev);
+ break;
case NOUVEAU_GETPARAM_GRAPH_UNITS:
/* NV40 and NV50 versions are quite different, but register
* address is the same. User is supposed to know the card
diff --git a/drivers/gpu/drm/nouveau/nv04_cursor.c b/drivers/gpu/drm/nouveau/nv04_cursor.c
index 89a91b9..aaf3de3 100644
--- a/drivers/gpu/drm/nouveau/nv04_cursor.c
+++ b/drivers/gpu/drm/nouveau/nv04_cursor.c
@@ -20,6 +20,7 @@
static void
nv04_cursor_set_pos(struct nouveau_crtc *nv_crtc, int x, int y)
{
+ nv_crtc->cursor_saved_x = x; nv_crtc->cursor_saved_y = y;
NVWriteRAMDAC(nv_crtc->base.dev, nv_crtc->index,
NV_PRAMDAC_CU_START_POS,
XLATE(y, 0, NV_PRAMDAC_CU_START_POS_Y) |
diff --git a/drivers/gpu/drm/nouveau/nv40_graph.c b/drivers/gpu/drm/nouveau/nv40_graph.c
index 0616c96..704a25d 100644
--- a/drivers/gpu/drm/nouveau/nv40_graph.c
+++ b/drivers/gpu/drm/nouveau/nv40_graph.c
@@ -253,7 +253,11 @@
if (!dev_priv->engine.graph.ctxprog) {
struct nouveau_grctx ctx = {};
- uint32_t cp[256];
+ uint32_t *cp;
+
+ cp = kmalloc(sizeof(*cp) * 256, GFP_KERNEL);
+ if (!cp)
+ return -ENOMEM;
ctx.dev = dev;
ctx.mode = NOUVEAU_GRCTX_PROG;
@@ -265,6 +269,8 @@
nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_INDEX, 0);
for (i = 0; i < ctx.ctxprog_len; i++)
nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_DATA, cp[i]);
+
+ kfree(cp);
}
/* No context present currently */
diff --git a/drivers/gpu/drm/nouveau/nv50_cursor.c b/drivers/gpu/drm/nouveau/nv50_cursor.c
index 753e723..03ad7ab 100644
--- a/drivers/gpu/drm/nouveau/nv50_cursor.c
+++ b/drivers/gpu/drm/nouveau/nv50_cursor.c
@@ -107,6 +107,7 @@
{
struct drm_device *dev = nv_crtc->base.dev;
+ nv_crtc->cursor_saved_x = x; nv_crtc->cursor_saved_y = y;
nv_wr32(dev, NV50_PDISPLAY_CURSOR_USER_POS(nv_crtc->index),
((y & 0xFFFF) << 16) | (x & 0xFFFF));
/* Needed to make the cursor move. */
diff --git a/drivers/gpu/drm/nouveau/nv50_fb.c b/drivers/gpu/drm/nouveau/nv50_fb.c
index a95e694..32611bd 100644
--- a/drivers/gpu/drm/nouveau/nv50_fb.c
+++ b/drivers/gpu/drm/nouveau/nv50_fb.c
@@ -6,10 +6,16 @@
int
nv50_fb_init(struct drm_device *dev)
{
- /* This is needed to get meaningful information from 100c90
- * on traps. No idea what these values mean exactly. */
struct drm_nouveau_private *dev_priv = dev->dev_private;
+ /* Not a clue what this is exactly. Without pointing it at a
+ * scratch page, VRAM->GART blits with M2MF (as in DDX DFS)
+ * cause IOMMU "read from address 0" errors (rh#561267)
+ */
+ nv_wr32(dev, 0x100c08, dev_priv->gart_info.sg_dummy_bus >> 8);
+
+ /* This is needed to get meaningful information from 100c90
+ * on traps. No idea what these values mean exactly. */
switch (dev_priv->chipset) {
case 0x50:
nv_wr32(dev, 0x100c90, 0x0707ff);
diff --git a/drivers/gpu/drm/nouveau/nv50_gpio.c b/drivers/gpu/drm/nouveau/nv50_gpio.c
index c61782b..bb47ad7 100644
--- a/drivers/gpu/drm/nouveau/nv50_gpio.c
+++ b/drivers/gpu/drm/nouveau/nv50_gpio.c
@@ -31,7 +31,7 @@
{
const uint32_t nv50_gpio_reg[4] = { 0xe104, 0xe108, 0xe280, 0xe284 };
- if (gpio->line > 32)
+ if (gpio->line >= 32)
return -EINVAL;
*reg = nv50_gpio_reg[gpio->line >> 3];
diff --git a/drivers/gpu/drm/nouveau/nv50_sor.c b/drivers/gpu/drm/nouveau/nv50_sor.c
index b11eaf9..812778d 100644
--- a/drivers/gpu/drm/nouveau/nv50_sor.c
+++ b/drivers/gpu/drm/nouveau/nv50_sor.c
@@ -274,7 +274,6 @@
int
nv50_sor_create(struct drm_device *dev, struct dcb_entry *entry)
{
- struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_encoder *nv_encoder = NULL;
struct drm_encoder *encoder;
bool dum;
@@ -324,11 +323,7 @@
int or = nv_encoder->or, link = !(entry->dpconf.sor.link & 1);
uint32_t tmp;
- if (dev_priv->chipset < 0x90 ||
- dev_priv->chipset == 0x92 || dev_priv->chipset == 0xa0)
- tmp = nv_rd32(dev, NV50_PDISPLAY_SOR_MODE_CTRL_C(or));
- else
- tmp = nv_rd32(dev, NV90_PDISPLAY_SOR_MODE_CTRL_C(or));
+ tmp = nv_rd32(dev, 0x61c700 + (or * 0x800));
switch ((tmp & 0x00000f00) >> 8) {
case 8:
diff --git a/drivers/gpu/drm/radeon/Makefile b/drivers/gpu/drm/radeon/Makefile
index 3c91312..84b1f27 100644
--- a/drivers/gpu/drm/radeon/Makefile
+++ b/drivers/gpu/drm/radeon/Makefile
@@ -33,6 +33,9 @@
$(obj)/r600_reg_safe.h: $(src)/reg_srcs/r600 $(obj)/mkregtable
$(call if_changed,mkregtable)
+$(obj)/evergreen_reg_safe.h: $(src)/reg_srcs/evergreen $(obj)/mkregtable
+ $(call if_changed,mkregtable)
+
$(obj)/r100.o: $(obj)/r100_reg_safe.h $(obj)/rn50_reg_safe.h
$(obj)/r200.o: $(obj)/r200_reg_safe.h
@@ -47,6 +50,8 @@
$(obj)/r600_cs.o: $(obj)/r600_reg_safe.h
+$(obj)/evergreen_cs.o: $(obj)/evergreen_reg_safe.h
+
radeon-y := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o \
radeon_irq.o r300_cmdbuf.o r600_cp.o
# add KMS driver
@@ -60,7 +65,7 @@
rs400.o rs600.o rs690.o rv515.o r520.o r600.o rv770.o radeon_test.o \
r200.o radeon_legacy_tv.o r600_cs.o r600_blit.o r600_blit_shaders.o \
r600_blit_kms.o radeon_pm.o atombios_dp.o r600_audio.o r600_hdmi.o \
- evergreen.o
+ evergreen.o evergreen_cs.o
radeon-$(CONFIG_COMPAT) += radeon_ioc32.o
radeon-$(CONFIG_VGA_SWITCHEROO) += radeon_atpx_handler.o
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 03dd6c4..8c2d647 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -498,7 +498,7 @@
if ((rdev->family == CHIP_RS600) ||
(rdev->family == CHIP_RS690) ||
(rdev->family == CHIP_RS740))
- pll->flags |= (RADEON_PLL_USE_FRAC_FB_DIV |
+ pll->flags |= (/*RADEON_PLL_USE_FRAC_FB_DIV |*/
RADEON_PLL_PREFER_CLOSEST_LOWER);
if (ASIC_IS_DCE32(rdev) && mode->clock > 200000) /* range limits??? */
@@ -707,6 +707,7 @@
break;
case ATOM_DCPLL:
case ATOM_PPLL_INVALID:
+ default:
pll = &rdev->clock.dcpll;
break;
}
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 8c8e4d3..1caf625 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -41,7 +41,18 @@
void evergreen_pm_misc(struct radeon_device *rdev)
{
+ int req_ps_idx = rdev->pm.requested_power_state_index;
+ int req_cm_idx = rdev->pm.requested_clock_mode_index;
+ struct radeon_power_state *ps = &rdev->pm.power_state[req_ps_idx];
+ struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage;
+ if ((voltage->type == VOLTAGE_SW) && voltage->voltage) {
+ if (voltage->voltage != rdev->pm.current_vddc) {
+ radeon_atom_set_voltage(rdev, voltage->voltage);
+ rdev->pm.current_vddc = voltage->voltage;
+ DRM_DEBUG("Setting: v: %d\n", voltage->voltage);
+ }
+ }
}
void evergreen_pm_prepare(struct radeon_device *rdev)
@@ -596,7 +607,7 @@
WREG32(MC_VM_FB_LOCATION, tmp);
WREG32(HDP_NONSURFACE_BASE, (rdev->mc.vram_start >> 8));
WREG32(HDP_NONSURFACE_INFO, (2 << 7));
- WREG32(HDP_NONSURFACE_SIZE, (rdev->mc.mc_vram_size - 1) | 0x3FF);
+ WREG32(HDP_NONSURFACE_SIZE, 0x3FFFFFFF);
if (rdev->flags & RADEON_IS_AGP) {
WREG32(MC_VM_AGP_TOP, rdev->mc.gtt_end >> 16);
WREG32(MC_VM_AGP_BOT, rdev->mc.gtt_start >> 16);
@@ -1211,11 +1222,11 @@
ps_thread_count = 128;
sq_thread_resource_mgmt = NUM_PS_THREADS(ps_thread_count);
- sq_thread_resource_mgmt |= NUM_VS_THREADS(((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8;
- sq_thread_resource_mgmt |= NUM_GS_THREADS(((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8;
- sq_thread_resource_mgmt |= NUM_ES_THREADS(((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8;
- sq_thread_resource_mgmt_2 = NUM_HS_THREADS(((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8;
- sq_thread_resource_mgmt_2 |= NUM_LS_THREADS(((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8;
+ sq_thread_resource_mgmt |= NUM_VS_THREADS((((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8);
+ sq_thread_resource_mgmt |= NUM_GS_THREADS((((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8);
+ sq_thread_resource_mgmt |= NUM_ES_THREADS((((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8);
+ sq_thread_resource_mgmt_2 = NUM_HS_THREADS((((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8);
+ sq_thread_resource_mgmt_2 |= NUM_LS_THREADS((((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8);
sq_stack_resource_mgmt_1 = NUM_PS_STACK_ENTRIES((rdev->config.evergreen.max_stack_entries * 1) / 6);
sq_stack_resource_mgmt_1 |= NUM_VS_STACK_ENTRIES((rdev->config.evergreen.max_stack_entries * 1) / 6);
@@ -1249,6 +1260,9 @@
WREG32(VGT_GS_VERTEX_REUSE, 16);
WREG32(PA_SC_LINE_STIPPLE_STATE, 0);
+ WREG32(VGT_VERTEX_REUSE_BLOCK_CNTL, 14);
+ WREG32(VGT_OUT_DEALLOC_CNTL, 16);
+
WREG32(CB_PERF_CTR0_SEL_0, 0);
WREG32(CB_PERF_CTR0_SEL_1, 0);
WREG32(CB_PERF_CTR1_SEL_0, 0);
@@ -1258,6 +1272,26 @@
WREG32(CB_PERF_CTR3_SEL_0, 0);
WREG32(CB_PERF_CTR3_SEL_1, 0);
+ /* clear render buffer base addresses */
+ WREG32(CB_COLOR0_BASE, 0);
+ WREG32(CB_COLOR1_BASE, 0);
+ WREG32(CB_COLOR2_BASE, 0);
+ WREG32(CB_COLOR3_BASE, 0);
+ WREG32(CB_COLOR4_BASE, 0);
+ WREG32(CB_COLOR5_BASE, 0);
+ WREG32(CB_COLOR6_BASE, 0);
+ WREG32(CB_COLOR7_BASE, 0);
+ WREG32(CB_COLOR8_BASE, 0);
+ WREG32(CB_COLOR9_BASE, 0);
+ WREG32(CB_COLOR10_BASE, 0);
+ WREG32(CB_COLOR11_BASE, 0);
+
+ /* set the shader const cache sizes to 0 */
+ for (i = SQ_ALU_CONST_BUFFER_SIZE_PS_0; i < 0x28200; i += 4)
+ WREG32(i, 0);
+ for (i = SQ_ALU_CONST_BUFFER_SIZE_HS_0; i < 0x29000; i += 4)
+ WREG32(i, 0);
+
hdp_host_path_cntl = RREG32(HDP_HOST_PATH_CNTL);
WREG32(HDP_HOST_PATH_CNTL, hdp_host_path_cntl);
@@ -2148,7 +2182,7 @@
if (r)
return r;
- rdev->accel_working = false;
+ rdev->accel_working = true;
r = evergreen_startup(rdev);
if (r) {
dev_err(rdev->dev, "disabling GPU acceleration\n");
diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c
new file mode 100644
index 0000000..010963d
--- /dev/null
+++ b/drivers/gpu/drm/radeon/evergreen_cs.c
@@ -0,0 +1,1356 @@
+/*
+ * Copyright 2010 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ * Alex Deucher
+ * Jerome Glisse
+ */
+#include "drmP.h"
+#include "radeon.h"
+#include "evergreend.h"
+#include "evergreen_reg_safe.h"
+
+static int evergreen_cs_packet_next_reloc(struct radeon_cs_parser *p,
+ struct radeon_cs_reloc **cs_reloc);
+
+struct evergreen_cs_track {
+ u32 group_size;
+ u32 nbanks;
+ u32 npipes;
+ /* value we track */
+ u32 nsamples;
+ u32 cb_color_base_last[12];
+ struct radeon_bo *cb_color_bo[12];
+ u32 cb_color_bo_offset[12];
+ struct radeon_bo *cb_color_fmask_bo[8];
+ struct radeon_bo *cb_color_cmask_bo[8];
+ u32 cb_color_info[12];
+ u32 cb_color_view[12];
+ u32 cb_color_pitch_idx[12];
+ u32 cb_color_slice_idx[12];
+ u32 cb_color_dim_idx[12];
+ u32 cb_color_dim[12];
+ u32 cb_color_pitch[12];
+ u32 cb_color_slice[12];
+ u32 cb_color_cmask_slice[8];
+ u32 cb_color_fmask_slice[8];
+ u32 cb_target_mask;
+ u32 cb_shader_mask;
+ u32 vgt_strmout_config;
+ u32 vgt_strmout_buffer_config;
+ u32 db_depth_control;
+ u32 db_depth_view;
+ u32 db_depth_size;
+ u32 db_depth_size_idx;
+ u32 db_z_info;
+ u32 db_z_idx;
+ u32 db_z_read_offset;
+ u32 db_z_write_offset;
+ struct radeon_bo *db_z_read_bo;
+ struct radeon_bo *db_z_write_bo;
+ u32 db_s_info;
+ u32 db_s_idx;
+ u32 db_s_read_offset;
+ u32 db_s_write_offset;
+ struct radeon_bo *db_s_read_bo;
+ struct radeon_bo *db_s_write_bo;
+};
+
+static void evergreen_cs_track_init(struct evergreen_cs_track *track)
+{
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ track->cb_color_fmask_bo[i] = NULL;
+ track->cb_color_cmask_bo[i] = NULL;
+ track->cb_color_cmask_slice[i] = 0;
+ track->cb_color_fmask_slice[i] = 0;
+ }
+
+ for (i = 0; i < 12; i++) {
+ track->cb_color_base_last[i] = 0;
+ track->cb_color_bo[i] = NULL;
+ track->cb_color_bo_offset[i] = 0xFFFFFFFF;
+ track->cb_color_info[i] = 0;
+ track->cb_color_view[i] = 0;
+ track->cb_color_pitch_idx[i] = 0;
+ track->cb_color_slice_idx[i] = 0;
+ track->cb_color_dim[i] = 0;
+ track->cb_color_pitch[i] = 0;
+ track->cb_color_slice[i] = 0;
+ track->cb_color_dim[i] = 0;
+ }
+ track->cb_target_mask = 0xFFFFFFFF;
+ track->cb_shader_mask = 0xFFFFFFFF;
+
+ track->db_depth_view = 0xFFFFC000;
+ track->db_depth_size = 0xFFFFFFFF;
+ track->db_depth_size_idx = 0;
+ track->db_depth_control = 0xFFFFFFFF;
+ track->db_z_info = 0xFFFFFFFF;
+ track->db_z_idx = 0xFFFFFFFF;
+ track->db_z_read_offset = 0xFFFFFFFF;
+ track->db_z_write_offset = 0xFFFFFFFF;
+ track->db_z_read_bo = NULL;
+ track->db_z_write_bo = NULL;
+ track->db_s_info = 0xFFFFFFFF;
+ track->db_s_idx = 0xFFFFFFFF;
+ track->db_s_read_offset = 0xFFFFFFFF;
+ track->db_s_write_offset = 0xFFFFFFFF;
+ track->db_s_read_bo = NULL;
+ track->db_s_write_bo = NULL;
+}
+
+static inline int evergreen_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
+{
+ /* XXX fill in */
+ return 0;
+}
+
+static int evergreen_cs_track_check(struct radeon_cs_parser *p)
+{
+ struct evergreen_cs_track *track = p->track;
+
+ /* we don't support stream out buffer yet */
+ if (track->vgt_strmout_config || track->vgt_strmout_buffer_config) {
+ dev_warn(p->dev, "this kernel doesn't support SMX output buffer\n");
+ return -EINVAL;
+ }
+
+ /* XXX fill in */
+ return 0;
+}
+
+/**
+ * evergreen_cs_packet_parse() - parse cp packet and point ib index to next packet
+ * @parser: parser structure holding parsing context.
+ * @pkt: where to store packet informations
+ *
+ * Assume that chunk_ib_index is properly set. Will return -EINVAL
+ * if packet is bigger than remaining ib size. or if packets is unknown.
+ **/
+int evergreen_cs_packet_parse(struct radeon_cs_parser *p,
+ struct radeon_cs_packet *pkt,
+ unsigned idx)
+{
+ struct radeon_cs_chunk *ib_chunk = &p->chunks[p->chunk_ib_idx];
+ uint32_t header;
+
+ if (idx >= ib_chunk->length_dw) {
+ DRM_ERROR("Can not parse packet at %d after CS end %d !\n",
+ idx, ib_chunk->length_dw);
+ return -EINVAL;
+ }
+ header = radeon_get_ib_value(p, idx);
+ pkt->idx = idx;
+ pkt->type = CP_PACKET_GET_TYPE(header);
+ pkt->count = CP_PACKET_GET_COUNT(header);
+ pkt->one_reg_wr = 0;
+ switch (pkt->type) {
+ case PACKET_TYPE0:
+ pkt->reg = CP_PACKET0_GET_REG(header);
+ break;
+ case PACKET_TYPE3:
+ pkt->opcode = CP_PACKET3_GET_OPCODE(header);
+ break;
+ case PACKET_TYPE2:
+ pkt->count = -1;
+ break;
+ default:
+ DRM_ERROR("Unknown packet type %d at %d !\n", pkt->type, idx);
+ return -EINVAL;
+ }
+ if ((pkt->count + 1 + pkt->idx) >= ib_chunk->length_dw) {
+ DRM_ERROR("Packet (%d:%d:%d) end after CS buffer (%d) !\n",
+ pkt->idx, pkt->type, pkt->count, ib_chunk->length_dw);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/**
+ * evergreen_cs_packet_next_reloc() - parse next packet which should be reloc packet3
+ * @parser: parser structure holding parsing context.
+ * @data: pointer to relocation data
+ * @offset_start: starting offset
+ * @offset_mask: offset mask (to align start offset on)
+ * @reloc: reloc informations
+ *
+ * Check next packet is relocation packet3, do bo validation and compute
+ * GPU offset using the provided start.
+ **/
+static int evergreen_cs_packet_next_reloc(struct radeon_cs_parser *p,
+ struct radeon_cs_reloc **cs_reloc)
+{
+ struct radeon_cs_chunk *relocs_chunk;
+ struct radeon_cs_packet p3reloc;
+ unsigned idx;
+ int r;
+
+ if (p->chunk_relocs_idx == -1) {
+ DRM_ERROR("No relocation chunk !\n");
+ return -EINVAL;
+ }
+ *cs_reloc = NULL;
+ relocs_chunk = &p->chunks[p->chunk_relocs_idx];
+ r = evergreen_cs_packet_parse(p, &p3reloc, p->idx);
+ if (r) {
+ return r;
+ }
+ p->idx += p3reloc.count + 2;
+ if (p3reloc.type != PACKET_TYPE3 || p3reloc.opcode != PACKET3_NOP) {
+ DRM_ERROR("No packet3 for relocation for packet at %d.\n",
+ p3reloc.idx);
+ return -EINVAL;
+ }
+ idx = radeon_get_ib_value(p, p3reloc.idx + 1);
+ if (idx >= relocs_chunk->length_dw) {
+ DRM_ERROR("Relocs at %d after relocations chunk end %d !\n",
+ idx, relocs_chunk->length_dw);
+ return -EINVAL;
+ }
+ /* FIXME: we assume reloc size is 4 dwords */
+ *cs_reloc = p->relocs_ptr[(idx / 4)];
+ return 0;
+}
+
+/**
+ * evergreen_cs_packet_next_is_pkt3_nop() - test if next packet is packet3 nop for reloc
+ * @parser: parser structure holding parsing context.
+ *
+ * Check next packet is relocation packet3, do bo validation and compute
+ * GPU offset using the provided start.
+ **/
+static inline int evergreen_cs_packet_next_is_pkt3_nop(struct radeon_cs_parser *p)
+{
+ struct radeon_cs_packet p3reloc;
+ int r;
+
+ r = evergreen_cs_packet_parse(p, &p3reloc, p->idx);
+ if (r) {
+ return 0;
+ }
+ if (p3reloc.type != PACKET_TYPE3 || p3reloc.opcode != PACKET3_NOP) {
+ return 0;
+ }
+ return 1;
+}
+
+/**
+ * evergreen_cs_packet_next_vline() - parse userspace VLINE packet
+ * @parser: parser structure holding parsing context.
+ *
+ * Userspace sends a special sequence for VLINE waits.
+ * PACKET0 - VLINE_START_END + value
+ * PACKET3 - WAIT_REG_MEM poll vline status reg
+ * RELOC (P3) - crtc_id in reloc.
+ *
+ * This function parses this and relocates the VLINE START END
+ * and WAIT_REG_MEM packets to the correct crtc.
+ * It also detects a switched off crtc and nulls out the
+ * wait in that case.
+ */
+static int evergreen_cs_packet_parse_vline(struct radeon_cs_parser *p)
+{
+ struct drm_mode_object *obj;
+ struct drm_crtc *crtc;
+ struct radeon_crtc *radeon_crtc;
+ struct radeon_cs_packet p3reloc, wait_reg_mem;
+ int crtc_id;
+ int r;
+ uint32_t header, h_idx, reg, wait_reg_mem_info;
+ volatile uint32_t *ib;
+
+ ib = p->ib->ptr;
+
+ /* parse the WAIT_REG_MEM */
+ r = evergreen_cs_packet_parse(p, &wait_reg_mem, p->idx);
+ if (r)
+ return r;
+
+ /* check its a WAIT_REG_MEM */
+ if (wait_reg_mem.type != PACKET_TYPE3 ||
+ wait_reg_mem.opcode != PACKET3_WAIT_REG_MEM) {
+ DRM_ERROR("vline wait missing WAIT_REG_MEM segment\n");
+ r = -EINVAL;
+ return r;
+ }
+
+ wait_reg_mem_info = radeon_get_ib_value(p, wait_reg_mem.idx + 1);
+ /* bit 4 is reg (0) or mem (1) */
+ if (wait_reg_mem_info & 0x10) {
+ DRM_ERROR("vline WAIT_REG_MEM waiting on MEM rather than REG\n");
+ r = -EINVAL;
+ return r;
+ }
+ /* waiting for value to be equal */
+ if ((wait_reg_mem_info & 0x7) != 0x3) {
+ DRM_ERROR("vline WAIT_REG_MEM function not equal\n");
+ r = -EINVAL;
+ return r;
+ }
+ if ((radeon_get_ib_value(p, wait_reg_mem.idx + 2) << 2) != EVERGREEN_VLINE_STATUS) {
+ DRM_ERROR("vline WAIT_REG_MEM bad reg\n");
+ r = -EINVAL;
+ return r;
+ }
+
+ if (radeon_get_ib_value(p, wait_reg_mem.idx + 5) != EVERGREEN_VLINE_STAT) {
+ DRM_ERROR("vline WAIT_REG_MEM bad bit mask\n");
+ r = -EINVAL;
+ return r;
+ }
+
+ /* jump over the NOP */
+ r = evergreen_cs_packet_parse(p, &p3reloc, p->idx + wait_reg_mem.count + 2);
+ if (r)
+ return r;
+
+ h_idx = p->idx - 2;
+ p->idx += wait_reg_mem.count + 2;
+ p->idx += p3reloc.count + 2;
+
+ header = radeon_get_ib_value(p, h_idx);
+ crtc_id = radeon_get_ib_value(p, h_idx + 2 + 7 + 1);
+ reg = CP_PACKET0_GET_REG(header);
+ mutex_lock(&p->rdev->ddev->mode_config.mutex);
+ obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
+ if (!obj) {
+ DRM_ERROR("cannot find crtc %d\n", crtc_id);
+ r = -EINVAL;
+ goto out;
+ }
+ crtc = obj_to_crtc(obj);
+ radeon_crtc = to_radeon_crtc(crtc);
+ crtc_id = radeon_crtc->crtc_id;
+
+ if (!crtc->enabled) {
+ /* if the CRTC isn't enabled - we need to nop out the WAIT_REG_MEM */
+ ib[h_idx + 2] = PACKET2(0);
+ ib[h_idx + 3] = PACKET2(0);
+ ib[h_idx + 4] = PACKET2(0);
+ ib[h_idx + 5] = PACKET2(0);
+ ib[h_idx + 6] = PACKET2(0);
+ ib[h_idx + 7] = PACKET2(0);
+ ib[h_idx + 8] = PACKET2(0);
+ } else {
+ switch (reg) {
+ case EVERGREEN_VLINE_START_END:
+ header &= ~R600_CP_PACKET0_REG_MASK;
+ header |= (EVERGREEN_VLINE_START_END + radeon_crtc->crtc_offset) >> 2;
+ ib[h_idx] = header;
+ ib[h_idx + 4] = (EVERGREEN_VLINE_STATUS + radeon_crtc->crtc_offset) >> 2;
+ break;
+ default:
+ DRM_ERROR("unknown crtc reloc\n");
+ r = -EINVAL;
+ goto out;
+ }
+ }
+out:
+ mutex_unlock(&p->rdev->ddev->mode_config.mutex);
+ return r;
+}
+
+static int evergreen_packet0_check(struct radeon_cs_parser *p,
+ struct radeon_cs_packet *pkt,
+ unsigned idx, unsigned reg)
+{
+ int r;
+
+ switch (reg) {
+ case EVERGREEN_VLINE_START_END:
+ r = evergreen_cs_packet_parse_vline(p);
+ if (r) {
+ DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+ idx, reg);
+ return r;
+ }
+ break;
+ default:
+ printk(KERN_ERR "Forbidden register 0x%04X in cs at %d\n",
+ reg, idx);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int evergreen_cs_parse_packet0(struct radeon_cs_parser *p,
+ struct radeon_cs_packet *pkt)
+{
+ unsigned reg, i;
+ unsigned idx;
+ int r;
+
+ idx = pkt->idx + 1;
+ reg = pkt->reg;
+ for (i = 0; i <= pkt->count; i++, idx++, reg += 4) {
+ r = evergreen_packet0_check(p, pkt, idx, reg);
+ if (r) {
+ return r;
+ }
+ }
+ return 0;
+}
+
+/**
+ * evergreen_cs_check_reg() - check if register is authorized or not
+ * @parser: parser structure holding parsing context
+ * @reg: register we are testing
+ * @idx: index into the cs buffer
+ *
+ * This function will test against evergreen_reg_safe_bm and return 0
+ * if register is safe. If register is not flag as safe this function
+ * will test it against a list of register needind special handling.
+ */
+static inline int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx)
+{
+ struct evergreen_cs_track *track = (struct evergreen_cs_track *)p->track;
+ struct radeon_cs_reloc *reloc;
+ u32 last_reg = ARRAY_SIZE(evergreen_reg_safe_bm);
+ u32 m, i, tmp, *ib;
+ int r;
+
+ i = (reg >> 7);
+ if (i > last_reg) {
+ dev_warn(p->dev, "forbidden register 0x%08x at %d\n", reg, idx);
+ return -EINVAL;
+ }
+ m = 1 << ((reg >> 2) & 31);
+ if (!(evergreen_reg_safe_bm[i] & m))
+ return 0;
+ ib = p->ib->ptr;
+ switch (reg) {
+ /* force following reg to 0 in an attemp to disable out buffer
+ * which will need us to better understand how it works to perform
+ * security check on it (Jerome)
+ */
+ case SQ_ESGS_RING_SIZE:
+ case SQ_GSVS_RING_SIZE:
+ case SQ_ESTMP_RING_SIZE:
+ case SQ_GSTMP_RING_SIZE:
+ case SQ_HSTMP_RING_SIZE:
+ case SQ_LSTMP_RING_SIZE:
+ case SQ_PSTMP_RING_SIZE:
+ case SQ_VSTMP_RING_SIZE:
+ case SQ_ESGS_RING_ITEMSIZE:
+ case SQ_ESTMP_RING_ITEMSIZE:
+ case SQ_GSTMP_RING_ITEMSIZE:
+ case SQ_GSVS_RING_ITEMSIZE:
+ case SQ_GS_VERT_ITEMSIZE:
+ case SQ_GS_VERT_ITEMSIZE_1:
+ case SQ_GS_VERT_ITEMSIZE_2:
+ case SQ_GS_VERT_ITEMSIZE_3:
+ case SQ_GSVS_RING_OFFSET_1:
+ case SQ_GSVS_RING_OFFSET_2:
+ case SQ_GSVS_RING_OFFSET_3:
+ case SQ_HSTMP_RING_ITEMSIZE:
+ case SQ_LSTMP_RING_ITEMSIZE:
+ case SQ_PSTMP_RING_ITEMSIZE:
+ case SQ_VSTMP_RING_ITEMSIZE:
+ case VGT_TF_RING_SIZE:
+ /* get value to populate the IB don't remove */
+ tmp =radeon_get_ib_value(p, idx);
+ ib[idx] = 0;
+ break;
+ case DB_DEPTH_CONTROL:
+ track->db_depth_control = radeon_get_ib_value(p, idx);
+ break;
+ case DB_Z_INFO:
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ dev_warn(p->dev, "bad SET_CONTEXT_REG "
+ "0x%04X\n", reg);
+ return -EINVAL;
+ }
+ track->db_z_info = radeon_get_ib_value(p, idx);
+ ib[idx] &= ~Z_ARRAY_MODE(0xf);
+ track->db_z_info &= ~Z_ARRAY_MODE(0xf);
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) {
+ ib[idx] |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+ track->db_z_info |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+ } else {
+ ib[idx] |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+ track->db_z_info |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+ }
+ break;
+ case DB_STENCIL_INFO:
+ track->db_s_info = radeon_get_ib_value(p, idx);
+ break;
+ case DB_DEPTH_VIEW:
+ track->db_depth_view = radeon_get_ib_value(p, idx);
+ break;
+ case DB_DEPTH_SIZE:
+ track->db_depth_size = radeon_get_ib_value(p, idx);
+ track->db_depth_size_idx = idx;
+ break;
+ case DB_Z_READ_BASE:
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ dev_warn(p->dev, "bad SET_CONTEXT_REG "
+ "0x%04X\n", reg);
+ return -EINVAL;
+ }
+ track->db_z_read_offset = radeon_get_ib_value(p, idx);
+ ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ track->db_z_read_bo = reloc->robj;
+ break;
+ case DB_Z_WRITE_BASE:
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ dev_warn(p->dev, "bad SET_CONTEXT_REG "
+ "0x%04X\n", reg);
+ return -EINVAL;
+ }
+ track->db_z_write_offset = radeon_get_ib_value(p, idx);
+ ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ track->db_z_write_bo = reloc->robj;
+ break;
+ case DB_STENCIL_READ_BASE:
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ dev_warn(p->dev, "bad SET_CONTEXT_REG "
+ "0x%04X\n", reg);
+ return -EINVAL;
+ }
+ track->db_s_read_offset = radeon_get_ib_value(p, idx);
+ ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ track->db_s_read_bo = reloc->robj;
+ break;
+ case DB_STENCIL_WRITE_BASE:
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ dev_warn(p->dev, "bad SET_CONTEXT_REG "
+ "0x%04X\n", reg);
+ return -EINVAL;
+ }
+ track->db_s_write_offset = radeon_get_ib_value(p, idx);
+ ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ track->db_s_write_bo = reloc->robj;
+ break;
+ case VGT_STRMOUT_CONFIG:
+ track->vgt_strmout_config = radeon_get_ib_value(p, idx);
+ break;
+ case VGT_STRMOUT_BUFFER_CONFIG:
+ track->vgt_strmout_buffer_config = radeon_get_ib_value(p, idx);
+ break;
+ case CB_TARGET_MASK:
+ track->cb_target_mask = radeon_get_ib_value(p, idx);
+ break;
+ case CB_SHADER_MASK:
+ track->cb_shader_mask = radeon_get_ib_value(p, idx);
+ break;
+ case PA_SC_AA_CONFIG:
+ tmp = radeon_get_ib_value(p, idx) & MSAA_NUM_SAMPLES_MASK;
+ track->nsamples = 1 << tmp;
+ break;
+ case CB_COLOR0_VIEW:
+ case CB_COLOR1_VIEW:
+ case CB_COLOR2_VIEW:
+ case CB_COLOR3_VIEW:
+ case CB_COLOR4_VIEW:
+ case CB_COLOR5_VIEW:
+ case CB_COLOR6_VIEW:
+ case CB_COLOR7_VIEW:
+ tmp = (reg - CB_COLOR0_VIEW) / 0x3c;
+ track->cb_color_view[tmp] = radeon_get_ib_value(p, idx);
+ break;
+ case CB_COLOR8_VIEW:
+ case CB_COLOR9_VIEW:
+ case CB_COLOR10_VIEW:
+ case CB_COLOR11_VIEW:
+ tmp = ((reg - CB_COLOR8_VIEW) / 0x1c) + 8;
+ track->cb_color_view[tmp] = radeon_get_ib_value(p, idx);
+ break;
+ case CB_COLOR0_INFO:
+ case CB_COLOR1_INFO:
+ case CB_COLOR2_INFO:
+ case CB_COLOR3_INFO:
+ case CB_COLOR4_INFO:
+ case CB_COLOR5_INFO:
+ case CB_COLOR6_INFO:
+ case CB_COLOR7_INFO:
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ dev_warn(p->dev, "bad SET_CONTEXT_REG "
+ "0x%04X\n", reg);
+ return -EINVAL;
+ }
+ tmp = (reg - CB_COLOR0_INFO) / 0x3c;
+ track->cb_color_info[tmp] = radeon_get_ib_value(p, idx);
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) {
+ ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+ track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+ } else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
+ ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+ track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+ }
+ break;
+ case CB_COLOR8_INFO:
+ case CB_COLOR9_INFO:
+ case CB_COLOR10_INFO:
+ case CB_COLOR11_INFO:
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ dev_warn(p->dev, "bad SET_CONTEXT_REG "
+ "0x%04X\n", reg);
+ return -EINVAL;
+ }
+ tmp = ((reg - CB_COLOR8_INFO) / 0x1c) + 8;
+ track->cb_color_info[tmp] = radeon_get_ib_value(p, idx);
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) {
+ ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+ track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+ } else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
+ ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+ track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+ }
+ break;
+ case CB_COLOR0_PITCH:
+ case CB_COLOR1_PITCH:
+ case CB_COLOR2_PITCH:
+ case CB_COLOR3_PITCH:
+ case CB_COLOR4_PITCH:
+ case CB_COLOR5_PITCH:
+ case CB_COLOR6_PITCH:
+ case CB_COLOR7_PITCH:
+ tmp = (reg - CB_COLOR0_PITCH) / 0x3c;
+ track->cb_color_pitch[tmp] = radeon_get_ib_value(p, idx);
+ track->cb_color_pitch_idx[tmp] = idx;
+ break;
+ case CB_COLOR8_PITCH:
+ case CB_COLOR9_PITCH:
+ case CB_COLOR10_PITCH:
+ case CB_COLOR11_PITCH:
+ tmp = ((reg - CB_COLOR8_PITCH) / 0x1c) + 8;
+ track->cb_color_pitch[tmp] = radeon_get_ib_value(p, idx);
+ track->cb_color_pitch_idx[tmp] = idx;
+ break;
+ case CB_COLOR0_SLICE:
+ case CB_COLOR1_SLICE:
+ case CB_COLOR2_SLICE:
+ case CB_COLOR3_SLICE:
+ case CB_COLOR4_SLICE:
+ case CB_COLOR5_SLICE:
+ case CB_COLOR6_SLICE:
+ case CB_COLOR7_SLICE:
+ tmp = (reg - CB_COLOR0_SLICE) / 0x3c;
+ track->cb_color_slice[tmp] = radeon_get_ib_value(p, idx);
+ track->cb_color_slice_idx[tmp] = idx;
+ break;
+ case CB_COLOR8_SLICE:
+ case CB_COLOR9_SLICE:
+ case CB_COLOR10_SLICE:
+ case CB_COLOR11_SLICE:
+ tmp = ((reg - CB_COLOR8_SLICE) / 0x1c) + 8;
+ track->cb_color_slice[tmp] = radeon_get_ib_value(p, idx);
+ track->cb_color_slice_idx[tmp] = idx;
+ break;
+ case CB_COLOR0_ATTRIB:
+ case CB_COLOR1_ATTRIB:
+ case CB_COLOR2_ATTRIB:
+ case CB_COLOR3_ATTRIB:
+ case CB_COLOR4_ATTRIB:
+ case CB_COLOR5_ATTRIB:
+ case CB_COLOR6_ATTRIB:
+ case CB_COLOR7_ATTRIB:
+ case CB_COLOR8_ATTRIB:
+ case CB_COLOR9_ATTRIB:
+ case CB_COLOR10_ATTRIB:
+ case CB_COLOR11_ATTRIB:
+ break;
+ case CB_COLOR0_DIM:
+ case CB_COLOR1_DIM:
+ case CB_COLOR2_DIM:
+ case CB_COLOR3_DIM:
+ case CB_COLOR4_DIM:
+ case CB_COLOR5_DIM:
+ case CB_COLOR6_DIM:
+ case CB_COLOR7_DIM:
+ tmp = (reg - CB_COLOR0_DIM) / 0x3c;
+ track->cb_color_dim[tmp] = radeon_get_ib_value(p, idx);
+ track->cb_color_dim_idx[tmp] = idx;
+ break;
+ case CB_COLOR8_DIM:
+ case CB_COLOR9_DIM:
+ case CB_COLOR10_DIM:
+ case CB_COLOR11_DIM:
+ tmp = ((reg - CB_COLOR8_DIM) / 0x1c) + 8;
+ track->cb_color_dim[tmp] = radeon_get_ib_value(p, idx);
+ track->cb_color_dim_idx[tmp] = idx;
+ break;
+ case CB_COLOR0_FMASK:
+ case CB_COLOR1_FMASK:
+ case CB_COLOR2_FMASK:
+ case CB_COLOR3_FMASK:
+ case CB_COLOR4_FMASK:
+ case CB_COLOR5_FMASK:
+ case CB_COLOR6_FMASK:
+ case CB_COLOR7_FMASK:
+ tmp = (reg - CB_COLOR0_FMASK) / 0x3c;
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg);
+ return -EINVAL;
+ }
+ ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ track->cb_color_fmask_bo[tmp] = reloc->robj;
+ break;
+ case CB_COLOR0_CMASK:
+ case CB_COLOR1_CMASK:
+ case CB_COLOR2_CMASK:
+ case CB_COLOR3_CMASK:
+ case CB_COLOR4_CMASK:
+ case CB_COLOR5_CMASK:
+ case CB_COLOR6_CMASK:
+ case CB_COLOR7_CMASK:
+ tmp = (reg - CB_COLOR0_CMASK) / 0x3c;
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg);
+ return -EINVAL;
+ }
+ ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ track->cb_color_cmask_bo[tmp] = reloc->robj;
+ break;
+ case CB_COLOR0_FMASK_SLICE:
+ case CB_COLOR1_FMASK_SLICE:
+ case CB_COLOR2_FMASK_SLICE:
+ case CB_COLOR3_FMASK_SLICE:
+ case CB_COLOR4_FMASK_SLICE:
+ case CB_COLOR5_FMASK_SLICE:
+ case CB_COLOR6_FMASK_SLICE:
+ case CB_COLOR7_FMASK_SLICE:
+ tmp = (reg - CB_COLOR0_FMASK_SLICE) / 0x3c;
+ track->cb_color_fmask_slice[tmp] = radeon_get_ib_value(p, idx);
+ break;
+ case CB_COLOR0_CMASK_SLICE:
+ case CB_COLOR1_CMASK_SLICE:
+ case CB_COLOR2_CMASK_SLICE:
+ case CB_COLOR3_CMASK_SLICE:
+ case CB_COLOR4_CMASK_SLICE:
+ case CB_COLOR5_CMASK_SLICE:
+ case CB_COLOR6_CMASK_SLICE:
+ case CB_COLOR7_CMASK_SLICE:
+ tmp = (reg - CB_COLOR0_CMASK_SLICE) / 0x3c;
+ track->cb_color_cmask_slice[tmp] = radeon_get_ib_value(p, idx);
+ break;
+ case CB_COLOR0_BASE:
+ case CB_COLOR1_BASE:
+ case CB_COLOR2_BASE:
+ case CB_COLOR3_BASE:
+ case CB_COLOR4_BASE:
+ case CB_COLOR5_BASE:
+ case CB_COLOR6_BASE:
+ case CB_COLOR7_BASE:
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ dev_warn(p->dev, "bad SET_CONTEXT_REG "
+ "0x%04X\n", reg);
+ return -EINVAL;
+ }
+ tmp = (reg - CB_COLOR0_BASE) / 0x3c;
+ track->cb_color_bo_offset[tmp] = radeon_get_ib_value(p, idx);
+ ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ track->cb_color_base_last[tmp] = ib[idx];
+ track->cb_color_bo[tmp] = reloc->robj;
+ break;
+ case CB_COLOR8_BASE:
+ case CB_COLOR9_BASE:
+ case CB_COLOR10_BASE:
+ case CB_COLOR11_BASE:
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ dev_warn(p->dev, "bad SET_CONTEXT_REG "
+ "0x%04X\n", reg);
+ return -EINVAL;
+ }
+ tmp = ((reg - CB_COLOR8_BASE) / 0x1c) + 8;
+ track->cb_color_bo_offset[tmp] = radeon_get_ib_value(p, idx);
+ ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ track->cb_color_base_last[tmp] = ib[idx];
+ track->cb_color_bo[tmp] = reloc->robj;
+ break;
+ case CB_IMMED0_BASE:
+ case CB_IMMED1_BASE:
+ case CB_IMMED2_BASE:
+ case CB_IMMED3_BASE:
+ case CB_IMMED4_BASE:
+ case CB_IMMED5_BASE:
+ case CB_IMMED6_BASE:
+ case CB_IMMED7_BASE:
+ case CB_IMMED8_BASE:
+ case CB_IMMED9_BASE:
+ case CB_IMMED10_BASE:
+ case CB_IMMED11_BASE:
+ case DB_HTILE_DATA_BASE:
+ case SQ_PGM_START_FS:
+ case SQ_PGM_START_ES:
+ case SQ_PGM_START_VS:
+ case SQ_PGM_START_GS:
+ case SQ_PGM_START_PS:
+ case SQ_PGM_START_HS:
+ case SQ_PGM_START_LS:
+ case GDS_ADDR_BASE:
+ case SQ_CONST_MEM_BASE:
+ case SQ_ALU_CONST_CACHE_GS_0:
+ case SQ_ALU_CONST_CACHE_GS_1:
+ case SQ_ALU_CONST_CACHE_GS_2:
+ case SQ_ALU_CONST_CACHE_GS_3:
+ case SQ_ALU_CONST_CACHE_GS_4:
+ case SQ_ALU_CONST_CACHE_GS_5:
+ case SQ_ALU_CONST_CACHE_GS_6:
+ case SQ_ALU_CONST_CACHE_GS_7:
+ case SQ_ALU_CONST_CACHE_GS_8:
+ case SQ_ALU_CONST_CACHE_GS_9:
+ case SQ_ALU_CONST_CACHE_GS_10:
+ case SQ_ALU_CONST_CACHE_GS_11:
+ case SQ_ALU_CONST_CACHE_GS_12:
+ case SQ_ALU_CONST_CACHE_GS_13:
+ case SQ_ALU_CONST_CACHE_GS_14:
+ case SQ_ALU_CONST_CACHE_GS_15:
+ case SQ_ALU_CONST_CACHE_PS_0:
+ case SQ_ALU_CONST_CACHE_PS_1:
+ case SQ_ALU_CONST_CACHE_PS_2:
+ case SQ_ALU_CONST_CACHE_PS_3:
+ case SQ_ALU_CONST_CACHE_PS_4:
+ case SQ_ALU_CONST_CACHE_PS_5:
+ case SQ_ALU_CONST_CACHE_PS_6:
+ case SQ_ALU_CONST_CACHE_PS_7:
+ case SQ_ALU_CONST_CACHE_PS_8:
+ case SQ_ALU_CONST_CACHE_PS_9:
+ case SQ_ALU_CONST_CACHE_PS_10:
+ case SQ_ALU_CONST_CACHE_PS_11:
+ case SQ_ALU_CONST_CACHE_PS_12:
+ case SQ_ALU_CONST_CACHE_PS_13:
+ case SQ_ALU_CONST_CACHE_PS_14:
+ case SQ_ALU_CONST_CACHE_PS_15:
+ case SQ_ALU_CONST_CACHE_VS_0:
+ case SQ_ALU_CONST_CACHE_VS_1:
+ case SQ_ALU_CONST_CACHE_VS_2:
+ case SQ_ALU_CONST_CACHE_VS_3:
+ case SQ_ALU_CONST_CACHE_VS_4:
+ case SQ_ALU_CONST_CACHE_VS_5:
+ case SQ_ALU_CONST_CACHE_VS_6:
+ case SQ_ALU_CONST_CACHE_VS_7:
+ case SQ_ALU_CONST_CACHE_VS_8:
+ case SQ_ALU_CONST_CACHE_VS_9:
+ case SQ_ALU_CONST_CACHE_VS_10:
+ case SQ_ALU_CONST_CACHE_VS_11:
+ case SQ_ALU_CONST_CACHE_VS_12:
+ case SQ_ALU_CONST_CACHE_VS_13:
+ case SQ_ALU_CONST_CACHE_VS_14:
+ case SQ_ALU_CONST_CACHE_VS_15:
+ case SQ_ALU_CONST_CACHE_HS_0:
+ case SQ_ALU_CONST_CACHE_HS_1:
+ case SQ_ALU_CONST_CACHE_HS_2:
+ case SQ_ALU_CONST_CACHE_HS_3:
+ case SQ_ALU_CONST_CACHE_HS_4:
+ case SQ_ALU_CONST_CACHE_HS_5:
+ case SQ_ALU_CONST_CACHE_HS_6:
+ case SQ_ALU_CONST_CACHE_HS_7:
+ case SQ_ALU_CONST_CACHE_HS_8:
+ case SQ_ALU_CONST_CACHE_HS_9:
+ case SQ_ALU_CONST_CACHE_HS_10:
+ case SQ_ALU_CONST_CACHE_HS_11:
+ case SQ_ALU_CONST_CACHE_HS_12:
+ case SQ_ALU_CONST_CACHE_HS_13:
+ case SQ_ALU_CONST_CACHE_HS_14:
+ case SQ_ALU_CONST_CACHE_HS_15:
+ case SQ_ALU_CONST_CACHE_LS_0:
+ case SQ_ALU_CONST_CACHE_LS_1:
+ case SQ_ALU_CONST_CACHE_LS_2:
+ case SQ_ALU_CONST_CACHE_LS_3:
+ case SQ_ALU_CONST_CACHE_LS_4:
+ case SQ_ALU_CONST_CACHE_LS_5:
+ case SQ_ALU_CONST_CACHE_LS_6:
+ case SQ_ALU_CONST_CACHE_LS_7:
+ case SQ_ALU_CONST_CACHE_LS_8:
+ case SQ_ALU_CONST_CACHE_LS_9:
+ case SQ_ALU_CONST_CACHE_LS_10:
+ case SQ_ALU_CONST_CACHE_LS_11:
+ case SQ_ALU_CONST_CACHE_LS_12:
+ case SQ_ALU_CONST_CACHE_LS_13:
+ case SQ_ALU_CONST_CACHE_LS_14:
+ case SQ_ALU_CONST_CACHE_LS_15:
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ dev_warn(p->dev, "bad SET_CONTEXT_REG "
+ "0x%04X\n", reg);
+ return -EINVAL;
+ }
+ ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ break;
+ default:
+ dev_warn(p->dev, "forbidden register 0x%08x at %d\n", reg, idx);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/**
+ * evergreen_check_texture_resource() - check if register is authorized or not
+ * @p: parser structure holding parsing context
+ * @idx: index into the cs buffer
+ * @texture: texture's bo structure
+ * @mipmap: mipmap's bo structure
+ *
+ * This function will check that the resource has valid field and that
+ * the texture and mipmap bo object are big enough to cover this resource.
+ */
+static inline int evergreen_check_texture_resource(struct radeon_cs_parser *p, u32 idx,
+ struct radeon_bo *texture,
+ struct radeon_bo *mipmap)
+{
+ /* XXX fill in */
+ return 0;
+}
+
+static int evergreen_packet3_check(struct radeon_cs_parser *p,
+ struct radeon_cs_packet *pkt)
+{
+ struct radeon_cs_reloc *reloc;
+ struct evergreen_cs_track *track;
+ volatile u32 *ib;
+ unsigned idx;
+ unsigned i;
+ unsigned start_reg, end_reg, reg;
+ int r;
+ u32 idx_value;
+
+ track = (struct evergreen_cs_track *)p->track;
+ ib = p->ib->ptr;
+ idx = pkt->idx + 1;
+ idx_value = radeon_get_ib_value(p, idx);
+
+ switch (pkt->opcode) {
+ case PACKET3_CONTEXT_CONTROL:
+ if (pkt->count != 1) {
+ DRM_ERROR("bad CONTEXT_CONTROL\n");
+ return -EINVAL;
+ }
+ break;
+ case PACKET3_INDEX_TYPE:
+ case PACKET3_NUM_INSTANCES:
+ case PACKET3_CLEAR_STATE:
+ if (pkt->count) {
+ DRM_ERROR("bad INDEX_TYPE/NUM_INSTANCES/CLEAR_STATE\n");
+ return -EINVAL;
+ }
+ break;
+ case PACKET3_INDEX_BASE:
+ if (pkt->count != 1) {
+ DRM_ERROR("bad INDEX_BASE\n");
+ return -EINVAL;
+ }
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("bad INDEX_BASE\n");
+ return -EINVAL;
+ }
+ ib[idx+0] = idx_value + (u32)(reloc->lobj.gpu_offset & 0xffffffff);
+ ib[idx+1] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+ r = evergreen_cs_track_check(p);
+ if (r) {
+ dev_warn(p->dev, "%s:%d invalid cmd stream\n", __func__, __LINE__);
+ return r;
+ }
+ break;
+ case PACKET3_DRAW_INDEX:
+ if (pkt->count != 3) {
+ DRM_ERROR("bad DRAW_INDEX\n");
+ return -EINVAL;
+ }
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("bad DRAW_INDEX\n");
+ return -EINVAL;
+ }
+ ib[idx+0] = idx_value + (u32)(reloc->lobj.gpu_offset & 0xffffffff);
+ ib[idx+1] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+ r = evergreen_cs_track_check(p);
+ if (r) {
+ dev_warn(p->dev, "%s:%d invalid cmd stream\n", __func__, __LINE__);
+ return r;
+ }
+ break;
+ case PACKET3_DRAW_INDEX_2:
+ if (pkt->count != 4) {
+ DRM_ERROR("bad DRAW_INDEX_2\n");
+ return -EINVAL;
+ }
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("bad DRAW_INDEX_2\n");
+ return -EINVAL;
+ }
+ ib[idx+1] = idx_value + (u32)(reloc->lobj.gpu_offset & 0xffffffff);
+ ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+ r = evergreen_cs_track_check(p);
+ if (r) {
+ dev_warn(p->dev, "%s:%d invalid cmd stream\n", __func__, __LINE__);
+ return r;
+ }
+ break;
+ case PACKET3_DRAW_INDEX_AUTO:
+ if (pkt->count != 1) {
+ DRM_ERROR("bad DRAW_INDEX_AUTO\n");
+ return -EINVAL;
+ }
+ r = evergreen_cs_track_check(p);
+ if (r) {
+ dev_warn(p->dev, "%s:%d invalid cmd stream %d\n", __func__, __LINE__, idx);
+ return r;
+ }
+ break;
+ case PACKET3_DRAW_INDEX_MULTI_AUTO:
+ if (pkt->count != 2) {
+ DRM_ERROR("bad DRAW_INDEX_MULTI_AUTO\n");
+ return -EINVAL;
+ }
+ r = evergreen_cs_track_check(p);
+ if (r) {
+ dev_warn(p->dev, "%s:%d invalid cmd stream %d\n", __func__, __LINE__, idx);
+ return r;
+ }
+ break;
+ case PACKET3_DRAW_INDEX_IMMD:
+ if (pkt->count < 2) {
+ DRM_ERROR("bad DRAW_INDEX_IMMD\n");
+ return -EINVAL;
+ }
+ r = evergreen_cs_track_check(p);
+ if (r) {
+ dev_warn(p->dev, "%s:%d invalid cmd stream\n", __func__, __LINE__);
+ return r;
+ }
+ break;
+ case PACKET3_DRAW_INDEX_OFFSET:
+ if (pkt->count != 2) {
+ DRM_ERROR("bad DRAW_INDEX_OFFSET\n");
+ return -EINVAL;
+ }
+ r = evergreen_cs_track_check(p);
+ if (r) {
+ dev_warn(p->dev, "%s:%d invalid cmd stream\n", __func__, __LINE__);
+ return r;
+ }
+ break;
+ case PACKET3_DRAW_INDEX_OFFSET_2:
+ if (pkt->count != 3) {
+ DRM_ERROR("bad DRAW_INDEX_OFFSET_2\n");
+ return -EINVAL;
+ }
+ r = evergreen_cs_track_check(p);
+ if (r) {
+ dev_warn(p->dev, "%s:%d invalid cmd stream\n", __func__, __LINE__);
+ return r;
+ }
+ break;
+ case PACKET3_WAIT_REG_MEM:
+ if (pkt->count != 5) {
+ DRM_ERROR("bad WAIT_REG_MEM\n");
+ return -EINVAL;
+ }
+ /* bit 4 is reg (0) or mem (1) */
+ if (idx_value & 0x10) {
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("bad WAIT_REG_MEM\n");
+ return -EINVAL;
+ }
+ ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
+ ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+ }
+ break;
+ case PACKET3_SURFACE_SYNC:
+ if (pkt->count != 3) {
+ DRM_ERROR("bad SURFACE_SYNC\n");
+ return -EINVAL;
+ }
+ /* 0xffffffff/0x0 is flush all cache flag */
+ if (radeon_get_ib_value(p, idx + 1) != 0xffffffff ||
+ radeon_get_ib_value(p, idx + 2) != 0) {
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("bad SURFACE_SYNC\n");
+ return -EINVAL;
+ }
+ ib[idx+2] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ }
+ break;
+ case PACKET3_EVENT_WRITE:
+ if (pkt->count != 2 && pkt->count != 0) {
+ DRM_ERROR("bad EVENT_WRITE\n");
+ return -EINVAL;
+ }
+ if (pkt->count) {
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("bad EVENT_WRITE\n");
+ return -EINVAL;
+ }
+ ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
+ ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+ }
+ break;
+ case PACKET3_EVENT_WRITE_EOP:
+ if (pkt->count != 4) {
+ DRM_ERROR("bad EVENT_WRITE_EOP\n");
+ return -EINVAL;
+ }
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("bad EVENT_WRITE_EOP\n");
+ return -EINVAL;
+ }
+ ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
+ ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+ break;
+ case PACKET3_EVENT_WRITE_EOS:
+ if (pkt->count != 3) {
+ DRM_ERROR("bad EVENT_WRITE_EOS\n");
+ return -EINVAL;
+ }
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("bad EVENT_WRITE_EOS\n");
+ return -EINVAL;
+ }
+ ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
+ ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+ break;
+ case PACKET3_SET_CONFIG_REG:
+ start_reg = (idx_value << 2) + PACKET3_SET_CONFIG_REG_START;
+ end_reg = 4 * pkt->count + start_reg - 4;
+ if ((start_reg < PACKET3_SET_CONFIG_REG_START) ||
+ (start_reg >= PACKET3_SET_CONFIG_REG_END) ||
+ (end_reg >= PACKET3_SET_CONFIG_REG_END)) {
+ DRM_ERROR("bad PACKET3_SET_CONFIG_REG\n");
+ return -EINVAL;
+ }
+ for (i = 0; i < pkt->count; i++) {
+ reg = start_reg + (4 * i);
+ r = evergreen_cs_check_reg(p, reg, idx+1+i);
+ if (r)
+ return r;
+ }
+ break;
+ case PACKET3_SET_CONTEXT_REG:
+ start_reg = (idx_value << 2) + PACKET3_SET_CONTEXT_REG_START;
+ end_reg = 4 * pkt->count + start_reg - 4;
+ if ((start_reg < PACKET3_SET_CONTEXT_REG_START) ||
+ (start_reg >= PACKET3_SET_CONTEXT_REG_END) ||
+ (end_reg >= PACKET3_SET_CONTEXT_REG_END)) {
+ DRM_ERROR("bad PACKET3_SET_CONTEXT_REG\n");
+ return -EINVAL;
+ }
+ for (i = 0; i < pkt->count; i++) {
+ reg = start_reg + (4 * i);
+ r = evergreen_cs_check_reg(p, reg, idx+1+i);
+ if (r)
+ return r;
+ }
+ break;
+ case PACKET3_SET_RESOURCE:
+ if (pkt->count % 8) {
+ DRM_ERROR("bad SET_RESOURCE\n");
+ return -EINVAL;
+ }
+ start_reg = (idx_value << 2) + PACKET3_SET_RESOURCE_START;
+ end_reg = 4 * pkt->count + start_reg - 4;
+ if ((start_reg < PACKET3_SET_RESOURCE_START) ||
+ (start_reg >= PACKET3_SET_RESOURCE_END) ||
+ (end_reg >= PACKET3_SET_RESOURCE_END)) {
+ DRM_ERROR("bad SET_RESOURCE\n");
+ return -EINVAL;
+ }
+ for (i = 0; i < (pkt->count / 8); i++) {
+ struct radeon_bo *texture, *mipmap;
+ u32 size, offset;
+
+ switch (G__SQ_CONSTANT_TYPE(radeon_get_ib_value(p, idx+1+(i*8)+7))) {
+ case SQ_TEX_VTX_VALID_TEXTURE:
+ /* tex base */
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("bad SET_RESOURCE (tex)\n");
+ return -EINVAL;
+ }
+ ib[idx+1+(i*8)+2] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+ ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+ else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+ ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+ texture = reloc->robj;
+ /* tex mip base */
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("bad SET_RESOURCE (tex)\n");
+ return -EINVAL;
+ }
+ ib[idx+1+(i*8)+3] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ mipmap = reloc->robj;
+ r = evergreen_check_texture_resource(p, idx+1+(i*8),
+ texture, mipmap);
+ if (r)
+ return r;
+ break;
+ case SQ_TEX_VTX_VALID_BUFFER:
+ /* vtx base */
+ r = evergreen_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("bad SET_RESOURCE (vtx)\n");
+ return -EINVAL;
+ }
+ offset = radeon_get_ib_value(p, idx+1+(i*8)+0);
+ size = radeon_get_ib_value(p, idx+1+(i*8)+1);
+ if (p->rdev && (size + offset) > radeon_bo_size(reloc->robj)) {
+ /* force size to size of the buffer */
+ dev_warn(p->dev, "vbo resource seems too big for the bo\n");
+ ib[idx+1+(i*8)+1] = radeon_bo_size(reloc->robj);
+ }
+ ib[idx+1+(i*8)+0] += (u32)((reloc->lobj.gpu_offset) & 0xffffffff);
+ ib[idx+1+(i*8)+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+ break;
+ case SQ_TEX_VTX_INVALID_TEXTURE:
+ case SQ_TEX_VTX_INVALID_BUFFER:
+ default:
+ DRM_ERROR("bad SET_RESOURCE\n");
+ return -EINVAL;
+ }
+ }
+ break;
+ case PACKET3_SET_ALU_CONST:
+ /* XXX fix me ALU const buffers only */
+ break;
+ case PACKET3_SET_BOOL_CONST:
+ start_reg = (idx_value << 2) + PACKET3_SET_BOOL_CONST_START;
+ end_reg = 4 * pkt->count + start_reg - 4;
+ if ((start_reg < PACKET3_SET_BOOL_CONST_START) ||
+ (start_reg >= PACKET3_SET_BOOL_CONST_END) ||
+ (end_reg >= PACKET3_SET_BOOL_CONST_END)) {
+ DRM_ERROR("bad SET_BOOL_CONST\n");
+ return -EINVAL;
+ }
+ break;
+ case PACKET3_SET_LOOP_CONST:
+ start_reg = (idx_value << 2) + PACKET3_SET_LOOP_CONST_START;
+ end_reg = 4 * pkt->count + start_reg - 4;
+ if ((start_reg < PACKET3_SET_LOOP_CONST_START) ||
+ (start_reg >= PACKET3_SET_LOOP_CONST_END) ||
+ (end_reg >= PACKET3_SET_LOOP_CONST_END)) {
+ DRM_ERROR("bad SET_LOOP_CONST\n");
+ return -EINVAL;
+ }
+ break;
+ case PACKET3_SET_CTL_CONST:
+ start_reg = (idx_value << 2) + PACKET3_SET_CTL_CONST_START;
+ end_reg = 4 * pkt->count + start_reg - 4;
+ if ((start_reg < PACKET3_SET_CTL_CONST_START) ||
+ (start_reg >= PACKET3_SET_CTL_CONST_END) ||
+ (end_reg >= PACKET3_SET_CTL_CONST_END)) {
+ DRM_ERROR("bad SET_CTL_CONST\n");
+ return -EINVAL;
+ }
+ break;
+ case PACKET3_SET_SAMPLER:
+ if (pkt->count % 3) {
+ DRM_ERROR("bad SET_SAMPLER\n");
+ return -EINVAL;
+ }
+ start_reg = (idx_value << 2) + PACKET3_SET_SAMPLER_START;
+ end_reg = 4 * pkt->count + start_reg - 4;
+ if ((start_reg < PACKET3_SET_SAMPLER_START) ||
+ (start_reg >= PACKET3_SET_SAMPLER_END) ||
+ (end_reg >= PACKET3_SET_SAMPLER_END)) {
+ DRM_ERROR("bad SET_SAMPLER\n");
+ return -EINVAL;
+ }
+ break;
+ case PACKET3_NOP:
+ break;
+ default:
+ DRM_ERROR("Packet3 opcode %x not supported\n", pkt->opcode);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+int evergreen_cs_parse(struct radeon_cs_parser *p)
+{
+ struct radeon_cs_packet pkt;
+ struct evergreen_cs_track *track;
+ int r;
+
+ if (p->track == NULL) {
+ /* initialize tracker, we are in kms */
+ track = kzalloc(sizeof(*track), GFP_KERNEL);
+ if (track == NULL)
+ return -ENOMEM;
+ evergreen_cs_track_init(track);
+ track->npipes = p->rdev->config.evergreen.tiling_npipes;
+ track->nbanks = p->rdev->config.evergreen.tiling_nbanks;
+ track->group_size = p->rdev->config.evergreen.tiling_group_size;
+ p->track = track;
+ }
+ do {
+ r = evergreen_cs_packet_parse(p, &pkt, p->idx);
+ if (r) {
+ kfree(p->track);
+ p->track = NULL;
+ return r;
+ }
+ p->idx += pkt.count + 2;
+ switch (pkt.type) {
+ case PACKET_TYPE0:
+ r = evergreen_cs_parse_packet0(p, &pkt);
+ break;
+ case PACKET_TYPE2:
+ break;
+ case PACKET_TYPE3:
+ r = evergreen_packet3_check(p, &pkt);
+ break;
+ default:
+ DRM_ERROR("Unknown packet type %d !\n", pkt.type);
+ kfree(p->track);
+ p->track = NULL;
+ return -EINVAL;
+ }
+ if (r) {
+ kfree(p->track);
+ p->track = NULL;
+ return r;
+ }
+ } while (p->idx < p->chunks[p->chunk_ib_idx].length_dw);
+#if 0
+ for (r = 0; r < p->ib->length_dw; r++) {
+ printk(KERN_INFO "%05d 0x%08X\n", r, p->ib->ptr[r]);
+ mdelay(1);
+ }
+#endif
+ kfree(p->track);
+ p->track = NULL;
+ return 0;
+}
+
diff --git a/drivers/gpu/drm/radeon/evergreen_reg.h b/drivers/gpu/drm/radeon/evergreen_reg.h
index af86af8..e028c1c 100644
--- a/drivers/gpu/drm/radeon/evergreen_reg.h
+++ b/drivers/gpu/drm/radeon/evergreen_reg.h
@@ -151,6 +151,9 @@
#define EVERGREEN_DATA_FORMAT 0x6b00
# define EVERGREEN_INTERLEAVE_EN (1 << 0)
#define EVERGREEN_DESKTOP_HEIGHT 0x6b04
+#define EVERGREEN_VLINE_START_END 0x6b08
+#define EVERGREEN_VLINE_STATUS 0x6bb8
+# define EVERGREEN_VLINE_STAT (1 << 12)
#define EVERGREEN_VIEWPORT_START 0x6d70
#define EVERGREEN_VIEWPORT_SIZE 0x6d74
diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h
index 93e9e17..a1cd621 100644
--- a/drivers/gpu/drm/radeon/evergreend.h
+++ b/drivers/gpu/drm/radeon/evergreend.h
@@ -218,6 +218,8 @@
#define CLIP_VTX_REORDER_ENA (1 << 0)
#define NUM_CLIP_SEQ(x) ((x) << 1)
#define PA_SC_AA_CONFIG 0x28C04
+#define MSAA_NUM_SAMPLES_SHIFT 0
+#define MSAA_NUM_SAMPLES_MASK 0x3
#define PA_SC_CLIPRECT_RULE 0x2820C
#define PA_SC_EDGERULE 0x28230
#define PA_SC_FIFO_SIZE 0x8BCC
@@ -553,4 +555,469 @@
# define DC_HPDx_RX_INT_TIMER(x) ((x) << 16)
# define DC_HPDx_EN (1 << 28)
+/*
+ * PM4
+ */
+#define PACKET_TYPE0 0
+#define PACKET_TYPE1 1
+#define PACKET_TYPE2 2
+#define PACKET_TYPE3 3
+
+#define CP_PACKET_GET_TYPE(h) (((h) >> 30) & 3)
+#define CP_PACKET_GET_COUNT(h) (((h) >> 16) & 0x3FFF)
+#define CP_PACKET0_GET_REG(h) (((h) & 0xFFFF) << 2)
+#define CP_PACKET3_GET_OPCODE(h) (((h) >> 8) & 0xFF)
+#define PACKET0(reg, n) ((PACKET_TYPE0 << 30) | \
+ (((reg) >> 2) & 0xFFFF) | \
+ ((n) & 0x3FFF) << 16)
+#define CP_PACKET2 0x80000000
+#define PACKET2_PAD_SHIFT 0
+#define PACKET2_PAD_MASK (0x3fffffff << 0)
+
+#define PACKET2(v) (CP_PACKET2 | REG_SET(PACKET2_PAD, (v)))
+
+#define PACKET3(op, n) ((PACKET_TYPE3 << 30) | \
+ (((op) & 0xFF) << 8) | \
+ ((n) & 0x3FFF) << 16)
+
+/* Packet 3 types */
+#define PACKET3_NOP 0x10
+#define PACKET3_SET_BASE 0x11
+#define PACKET3_CLEAR_STATE 0x12
+#define PACKET3_INDIRECT_BUFFER_SIZE 0x13
+#define PACKET3_DISPATCH_DIRECT 0x15
+#define PACKET3_DISPATCH_INDIRECT 0x16
+#define PACKET3_INDIRECT_BUFFER_END 0x17
+#define PACKET3_SET_PREDICATION 0x20
+#define PACKET3_REG_RMW 0x21
+#define PACKET3_COND_EXEC 0x22
+#define PACKET3_PRED_EXEC 0x23
+#define PACKET3_DRAW_INDIRECT 0x24
+#define PACKET3_DRAW_INDEX_INDIRECT 0x25
+#define PACKET3_INDEX_BASE 0x26
+#define PACKET3_DRAW_INDEX_2 0x27
+#define PACKET3_CONTEXT_CONTROL 0x28
+#define PACKET3_DRAW_INDEX_OFFSET 0x29
+#define PACKET3_INDEX_TYPE 0x2A
+#define PACKET3_DRAW_INDEX 0x2B
+#define PACKET3_DRAW_INDEX_AUTO 0x2D
+#define PACKET3_DRAW_INDEX_IMMD 0x2E
+#define PACKET3_NUM_INSTANCES 0x2F
+#define PACKET3_DRAW_INDEX_MULTI_AUTO 0x30
+#define PACKET3_STRMOUT_BUFFER_UPDATE 0x34
+#define PACKET3_DRAW_INDEX_OFFSET_2 0x35
+#define PACKET3_DRAW_INDEX_MULTI_ELEMENT 0x36
+#define PACKET3_MEM_SEMAPHORE 0x39
+#define PACKET3_MPEG_INDEX 0x3A
+#define PACKET3_WAIT_REG_MEM 0x3C
+#define PACKET3_MEM_WRITE 0x3D
+#define PACKET3_INDIRECT_BUFFER 0x32
+#define PACKET3_SURFACE_SYNC 0x43
+# define PACKET3_CB0_DEST_BASE_ENA (1 << 6)
+# define PACKET3_CB1_DEST_BASE_ENA (1 << 7)
+# define PACKET3_CB2_DEST_BASE_ENA (1 << 8)
+# define PACKET3_CB3_DEST_BASE_ENA (1 << 9)
+# define PACKET3_CB4_DEST_BASE_ENA (1 << 10)
+# define PACKET3_CB5_DEST_BASE_ENA (1 << 11)
+# define PACKET3_CB6_DEST_BASE_ENA (1 << 12)
+# define PACKET3_CB7_DEST_BASE_ENA (1 << 13)
+# define PACKET3_DB_DEST_BASE_ENA (1 << 14)
+# define PACKET3_CB8_DEST_BASE_ENA (1 << 15)
+# define PACKET3_CB9_DEST_BASE_ENA (1 << 16)
+# define PACKET3_CB10_DEST_BASE_ENA (1 << 17)
+# define PACKET3_CB11_DEST_BASE_ENA (1 << 17)
+# define PACKET3_FULL_CACHE_ENA (1 << 20)
+# define PACKET3_TC_ACTION_ENA (1 << 23)
+# define PACKET3_VC_ACTION_ENA (1 << 24)
+# define PACKET3_CB_ACTION_ENA (1 << 25)
+# define PACKET3_DB_ACTION_ENA (1 << 26)
+# define PACKET3_SH_ACTION_ENA (1 << 27)
+# define PACKET3_SMX_ACTION_ENA (1 << 28)
+#define PACKET3_ME_INITIALIZE 0x44
+#define PACKET3_ME_INITIALIZE_DEVICE_ID(x) ((x) << 16)
+#define PACKET3_COND_WRITE 0x45
+#define PACKET3_EVENT_WRITE 0x46
+#define PACKET3_EVENT_WRITE_EOP 0x47
+#define PACKET3_EVENT_WRITE_EOS 0x48
+#define PACKET3_PREAMBLE_CNTL 0x4A
+#define PACKET3_RB_OFFSET 0x4B
+#define PACKET3_ALU_PS_CONST_BUFFER_COPY 0x4C
+#define PACKET3_ALU_VS_CONST_BUFFER_COPY 0x4D
+#define PACKET3_ALU_PS_CONST_UPDATE 0x4E
+#define PACKET3_ALU_VS_CONST_UPDATE 0x4F
+#define PACKET3_ONE_REG_WRITE 0x57
+#define PACKET3_SET_CONFIG_REG 0x68
+#define PACKET3_SET_CONFIG_REG_START 0x00008000
+#define PACKET3_SET_CONFIG_REG_END 0x0000ac00
+#define PACKET3_SET_CONTEXT_REG 0x69
+#define PACKET3_SET_CONTEXT_REG_START 0x00028000
+#define PACKET3_SET_CONTEXT_REG_END 0x00029000
+#define PACKET3_SET_ALU_CONST 0x6A
+/* alu const buffers only; no reg file */
+#define PACKET3_SET_BOOL_CONST 0x6B
+#define PACKET3_SET_BOOL_CONST_START 0x0003a500
+#define PACKET3_SET_BOOL_CONST_END 0x0003a518
+#define PACKET3_SET_LOOP_CONST 0x6C
+#define PACKET3_SET_LOOP_CONST_START 0x0003a200
+#define PACKET3_SET_LOOP_CONST_END 0x0003a500
+#define PACKET3_SET_RESOURCE 0x6D
+#define PACKET3_SET_RESOURCE_START 0x00030000
+#define PACKET3_SET_RESOURCE_END 0x00038000
+#define PACKET3_SET_SAMPLER 0x6E
+#define PACKET3_SET_SAMPLER_START 0x0003c000
+#define PACKET3_SET_SAMPLER_END 0x0003c600
+#define PACKET3_SET_CTL_CONST 0x6F
+#define PACKET3_SET_CTL_CONST_START 0x0003cff0
+#define PACKET3_SET_CTL_CONST_END 0x0003ff0c
+#define PACKET3_SET_RESOURCE_OFFSET 0x70
+#define PACKET3_SET_ALU_CONST_VS 0x71
+#define PACKET3_SET_ALU_CONST_DI 0x72
+#define PACKET3_SET_CONTEXT_REG_INDIRECT 0x73
+#define PACKET3_SET_RESOURCE_INDIRECT 0x74
+#define PACKET3_SET_APPEND_CNT 0x75
+
+#define SQ_RESOURCE_CONSTANT_WORD7_0 0x3001c
+#define S__SQ_CONSTANT_TYPE(x) (((x) & 3) << 30)
+#define G__SQ_CONSTANT_TYPE(x) (((x) >> 30) & 3)
+#define SQ_TEX_VTX_INVALID_TEXTURE 0x0
+#define SQ_TEX_VTX_INVALID_BUFFER 0x1
+#define SQ_TEX_VTX_VALID_TEXTURE 0x2
+#define SQ_TEX_VTX_VALID_BUFFER 0x3
+
+#define SQ_CONST_MEM_BASE 0x8df8
+
+#define SQ_ESGS_RING_SIZE 0x8c44
+#define SQ_GSVS_RING_SIZE 0x8c4c
+#define SQ_ESTMP_RING_SIZE 0x8c54
+#define SQ_GSTMP_RING_SIZE 0x8c5c
+#define SQ_VSTMP_RING_SIZE 0x8c64
+#define SQ_PSTMP_RING_SIZE 0x8c6c
+#define SQ_LSTMP_RING_SIZE 0x8e14
+#define SQ_HSTMP_RING_SIZE 0x8e1c
+#define VGT_TF_RING_SIZE 0x8988
+
+#define SQ_ESGS_RING_ITEMSIZE 0x28900
+#define SQ_GSVS_RING_ITEMSIZE 0x28904
+#define SQ_ESTMP_RING_ITEMSIZE 0x28908
+#define SQ_GSTMP_RING_ITEMSIZE 0x2890c
+#define SQ_VSTMP_RING_ITEMSIZE 0x28910
+#define SQ_PSTMP_RING_ITEMSIZE 0x28914
+#define SQ_LSTMP_RING_ITEMSIZE 0x28830
+#define SQ_HSTMP_RING_ITEMSIZE 0x28834
+
+#define SQ_GS_VERT_ITEMSIZE 0x2891c
+#define SQ_GS_VERT_ITEMSIZE_1 0x28920
+#define SQ_GS_VERT_ITEMSIZE_2 0x28924
+#define SQ_GS_VERT_ITEMSIZE_3 0x28928
+#define SQ_GSVS_RING_OFFSET_1 0x2892c
+#define SQ_GSVS_RING_OFFSET_2 0x28930
+#define SQ_GSVS_RING_OFFSET_3 0x28934
+
+#define SQ_ALU_CONST_BUFFER_SIZE_PS_0 0x28140
+#define SQ_ALU_CONST_BUFFER_SIZE_HS_0 0x28f80
+
+#define SQ_ALU_CONST_CACHE_PS_0 0x28940
+#define SQ_ALU_CONST_CACHE_PS_1 0x28944
+#define SQ_ALU_CONST_CACHE_PS_2 0x28948
+#define SQ_ALU_CONST_CACHE_PS_3 0x2894c
+#define SQ_ALU_CONST_CACHE_PS_4 0x28950
+#define SQ_ALU_CONST_CACHE_PS_5 0x28954
+#define SQ_ALU_CONST_CACHE_PS_6 0x28958
+#define SQ_ALU_CONST_CACHE_PS_7 0x2895c
+#define SQ_ALU_CONST_CACHE_PS_8 0x28960
+#define SQ_ALU_CONST_CACHE_PS_9 0x28964
+#define SQ_ALU_CONST_CACHE_PS_10 0x28968
+#define SQ_ALU_CONST_CACHE_PS_11 0x2896c
+#define SQ_ALU_CONST_CACHE_PS_12 0x28970
+#define SQ_ALU_CONST_CACHE_PS_13 0x28974
+#define SQ_ALU_CONST_CACHE_PS_14 0x28978
+#define SQ_ALU_CONST_CACHE_PS_15 0x2897c
+#define SQ_ALU_CONST_CACHE_VS_0 0x28980
+#define SQ_ALU_CONST_CACHE_VS_1 0x28984
+#define SQ_ALU_CONST_CACHE_VS_2 0x28988
+#define SQ_ALU_CONST_CACHE_VS_3 0x2898c
+#define SQ_ALU_CONST_CACHE_VS_4 0x28990
+#define SQ_ALU_CONST_CACHE_VS_5 0x28994
+#define SQ_ALU_CONST_CACHE_VS_6 0x28998
+#define SQ_ALU_CONST_CACHE_VS_7 0x2899c
+#define SQ_ALU_CONST_CACHE_VS_8 0x289a0
+#define SQ_ALU_CONST_CACHE_VS_9 0x289a4
+#define SQ_ALU_CONST_CACHE_VS_10 0x289a8
+#define SQ_ALU_CONST_CACHE_VS_11 0x289ac
+#define SQ_ALU_CONST_CACHE_VS_12 0x289b0
+#define SQ_ALU_CONST_CACHE_VS_13 0x289b4
+#define SQ_ALU_CONST_CACHE_VS_14 0x289b8
+#define SQ_ALU_CONST_CACHE_VS_15 0x289bc
+#define SQ_ALU_CONST_CACHE_GS_0 0x289c0
+#define SQ_ALU_CONST_CACHE_GS_1 0x289c4
+#define SQ_ALU_CONST_CACHE_GS_2 0x289c8
+#define SQ_ALU_CONST_CACHE_GS_3 0x289cc
+#define SQ_ALU_CONST_CACHE_GS_4 0x289d0
+#define SQ_ALU_CONST_CACHE_GS_5 0x289d4
+#define SQ_ALU_CONST_CACHE_GS_6 0x289d8
+#define SQ_ALU_CONST_CACHE_GS_7 0x289dc
+#define SQ_ALU_CONST_CACHE_GS_8 0x289e0
+#define SQ_ALU_CONST_CACHE_GS_9 0x289e4
+#define SQ_ALU_CONST_CACHE_GS_10 0x289e8
+#define SQ_ALU_CONST_CACHE_GS_11 0x289ec
+#define SQ_ALU_CONST_CACHE_GS_12 0x289f0
+#define SQ_ALU_CONST_CACHE_GS_13 0x289f4
+#define SQ_ALU_CONST_CACHE_GS_14 0x289f8
+#define SQ_ALU_CONST_CACHE_GS_15 0x289fc
+#define SQ_ALU_CONST_CACHE_HS_0 0x28f00
+#define SQ_ALU_CONST_CACHE_HS_1 0x28f04
+#define SQ_ALU_CONST_CACHE_HS_2 0x28f08
+#define SQ_ALU_CONST_CACHE_HS_3 0x28f0c
+#define SQ_ALU_CONST_CACHE_HS_4 0x28f10
+#define SQ_ALU_CONST_CACHE_HS_5 0x28f14
+#define SQ_ALU_CONST_CACHE_HS_6 0x28f18
+#define SQ_ALU_CONST_CACHE_HS_7 0x28f1c
+#define SQ_ALU_CONST_CACHE_HS_8 0x28f20
+#define SQ_ALU_CONST_CACHE_HS_9 0x28f24
+#define SQ_ALU_CONST_CACHE_HS_10 0x28f28
+#define SQ_ALU_CONST_CACHE_HS_11 0x28f2c
+#define SQ_ALU_CONST_CACHE_HS_12 0x28f30
+#define SQ_ALU_CONST_CACHE_HS_13 0x28f34
+#define SQ_ALU_CONST_CACHE_HS_14 0x28f38
+#define SQ_ALU_CONST_CACHE_HS_15 0x28f3c
+#define SQ_ALU_CONST_CACHE_LS_0 0x28f40
+#define SQ_ALU_CONST_CACHE_LS_1 0x28f44
+#define SQ_ALU_CONST_CACHE_LS_2 0x28f48
+#define SQ_ALU_CONST_CACHE_LS_3 0x28f4c
+#define SQ_ALU_CONST_CACHE_LS_4 0x28f50
+#define SQ_ALU_CONST_CACHE_LS_5 0x28f54
+#define SQ_ALU_CONST_CACHE_LS_6 0x28f58
+#define SQ_ALU_CONST_CACHE_LS_7 0x28f5c
+#define SQ_ALU_CONST_CACHE_LS_8 0x28f60
+#define SQ_ALU_CONST_CACHE_LS_9 0x28f64
+#define SQ_ALU_CONST_CACHE_LS_10 0x28f68
+#define SQ_ALU_CONST_CACHE_LS_11 0x28f6c
+#define SQ_ALU_CONST_CACHE_LS_12 0x28f70
+#define SQ_ALU_CONST_CACHE_LS_13 0x28f74
+#define SQ_ALU_CONST_CACHE_LS_14 0x28f78
+#define SQ_ALU_CONST_CACHE_LS_15 0x28f7c
+
+#define DB_DEPTH_CONTROL 0x28800
+#define DB_DEPTH_VIEW 0x28008
+#define DB_HTILE_DATA_BASE 0x28014
+#define DB_Z_INFO 0x28040
+# define Z_ARRAY_MODE(x) ((x) << 4)
+#define DB_STENCIL_INFO 0x28044
+#define DB_Z_READ_BASE 0x28048
+#define DB_STENCIL_READ_BASE 0x2804c
+#define DB_Z_WRITE_BASE 0x28050
+#define DB_STENCIL_WRITE_BASE 0x28054
+#define DB_DEPTH_SIZE 0x28058
+
+#define SQ_PGM_START_PS 0x28840
+#define SQ_PGM_START_VS 0x2885c
+#define SQ_PGM_START_GS 0x28874
+#define SQ_PGM_START_ES 0x2888c
+#define SQ_PGM_START_FS 0x288a4
+#define SQ_PGM_START_HS 0x288b8
+#define SQ_PGM_START_LS 0x288d0
+
+#define VGT_STRMOUT_CONFIG 0x28b94
+#define VGT_STRMOUT_BUFFER_CONFIG 0x28b98
+
+#define CB_TARGET_MASK 0x28238
+#define CB_SHADER_MASK 0x2823c
+
+#define GDS_ADDR_BASE 0x28720
+
+#define CB_IMMED0_BASE 0x28b9c
+#define CB_IMMED1_BASE 0x28ba0
+#define CB_IMMED2_BASE 0x28ba4
+#define CB_IMMED3_BASE 0x28ba8
+#define CB_IMMED4_BASE 0x28bac
+#define CB_IMMED5_BASE 0x28bb0
+#define CB_IMMED6_BASE 0x28bb4
+#define CB_IMMED7_BASE 0x28bb8
+#define CB_IMMED8_BASE 0x28bbc
+#define CB_IMMED9_BASE 0x28bc0
+#define CB_IMMED10_BASE 0x28bc4
+#define CB_IMMED11_BASE 0x28bc8
+
+/* all 12 CB blocks have these regs */
+#define CB_COLOR0_BASE 0x28c60
+#define CB_COLOR0_PITCH 0x28c64
+#define CB_COLOR0_SLICE 0x28c68
+#define CB_COLOR0_VIEW 0x28c6c
+#define CB_COLOR0_INFO 0x28c70
+# define CB_ARRAY_MODE(x) ((x) << 8)
+# define ARRAY_LINEAR_GENERAL 0
+# define ARRAY_LINEAR_ALIGNED 1
+# define ARRAY_1D_TILED_THIN1 2
+# define ARRAY_2D_TILED_THIN1 4
+#define CB_COLOR0_ATTRIB 0x28c74
+#define CB_COLOR0_DIM 0x28c78
+/* only CB0-7 blocks have these regs */
+#define CB_COLOR0_CMASK 0x28c7c
+#define CB_COLOR0_CMASK_SLICE 0x28c80
+#define CB_COLOR0_FMASK 0x28c84
+#define CB_COLOR0_FMASK_SLICE 0x28c88
+#define CB_COLOR0_CLEAR_WORD0 0x28c8c
+#define CB_COLOR0_CLEAR_WORD1 0x28c90
+#define CB_COLOR0_CLEAR_WORD2 0x28c94
+#define CB_COLOR0_CLEAR_WORD3 0x28c98
+
+#define CB_COLOR1_BASE 0x28c9c
+#define CB_COLOR2_BASE 0x28cd8
+#define CB_COLOR3_BASE 0x28d14
+#define CB_COLOR4_BASE 0x28d50
+#define CB_COLOR5_BASE 0x28d8c
+#define CB_COLOR6_BASE 0x28dc8
+#define CB_COLOR7_BASE 0x28e04
+#define CB_COLOR8_BASE 0x28e40
+#define CB_COLOR9_BASE 0x28e5c
+#define CB_COLOR10_BASE 0x28e78
+#define CB_COLOR11_BASE 0x28e94
+
+#define CB_COLOR1_PITCH 0x28ca0
+#define CB_COLOR2_PITCH 0x28cdc
+#define CB_COLOR3_PITCH 0x28d18
+#define CB_COLOR4_PITCH 0x28d54
+#define CB_COLOR5_PITCH 0x28d90
+#define CB_COLOR6_PITCH 0x28dcc
+#define CB_COLOR7_PITCH 0x28e08
+#define CB_COLOR8_PITCH 0x28e44
+#define CB_COLOR9_PITCH 0x28e60
+#define CB_COLOR10_PITCH 0x28e7c
+#define CB_COLOR11_PITCH 0x28e98
+
+#define CB_COLOR1_SLICE 0x28ca4
+#define CB_COLOR2_SLICE 0x28ce0
+#define CB_COLOR3_SLICE 0x28d1c
+#define CB_COLOR4_SLICE 0x28d58
+#define CB_COLOR5_SLICE 0x28d94
+#define CB_COLOR6_SLICE 0x28dd0
+#define CB_COLOR7_SLICE 0x28e0c
+#define CB_COLOR8_SLICE 0x28e48
+#define CB_COLOR9_SLICE 0x28e64
+#define CB_COLOR10_SLICE 0x28e80
+#define CB_COLOR11_SLICE 0x28e9c
+
+#define CB_COLOR1_VIEW 0x28ca8
+#define CB_COLOR2_VIEW 0x28ce4
+#define CB_COLOR3_VIEW 0x28d20
+#define CB_COLOR4_VIEW 0x28d5c
+#define CB_COLOR5_VIEW 0x28d98
+#define CB_COLOR6_VIEW 0x28dd4
+#define CB_COLOR7_VIEW 0x28e10
+#define CB_COLOR8_VIEW 0x28e4c
+#define CB_COLOR9_VIEW 0x28e68
+#define CB_COLOR10_VIEW 0x28e84
+#define CB_COLOR11_VIEW 0x28ea0
+
+#define CB_COLOR1_INFO 0x28cac
+#define CB_COLOR2_INFO 0x28ce8
+#define CB_COLOR3_INFO 0x28d24
+#define CB_COLOR4_INFO 0x28d60
+#define CB_COLOR5_INFO 0x28d9c
+#define CB_COLOR6_INFO 0x28dd8
+#define CB_COLOR7_INFO 0x28e14
+#define CB_COLOR8_INFO 0x28e50
+#define CB_COLOR9_INFO 0x28e6c
+#define CB_COLOR10_INFO 0x28e88
+#define CB_COLOR11_INFO 0x28ea4
+
+#define CB_COLOR1_ATTRIB 0x28cb0
+#define CB_COLOR2_ATTRIB 0x28cec
+#define CB_COLOR3_ATTRIB 0x28d28
+#define CB_COLOR4_ATTRIB 0x28d64
+#define CB_COLOR5_ATTRIB 0x28da0
+#define CB_COLOR6_ATTRIB 0x28ddc
+#define CB_COLOR7_ATTRIB 0x28e18
+#define CB_COLOR8_ATTRIB 0x28e54
+#define CB_COLOR9_ATTRIB 0x28e70
+#define CB_COLOR10_ATTRIB 0x28e8c
+#define CB_COLOR11_ATTRIB 0x28ea8
+
+#define CB_COLOR1_DIM 0x28cb4
+#define CB_COLOR2_DIM 0x28cf0
+#define CB_COLOR3_DIM 0x28d2c
+#define CB_COLOR4_DIM 0x28d68
+#define CB_COLOR5_DIM 0x28da4
+#define CB_COLOR6_DIM 0x28de0
+#define CB_COLOR7_DIM 0x28e1c
+#define CB_COLOR8_DIM 0x28e58
+#define CB_COLOR9_DIM 0x28e74
+#define CB_COLOR10_DIM 0x28e90
+#define CB_COLOR11_DIM 0x28eac
+
+#define CB_COLOR1_CMASK 0x28cb8
+#define CB_COLOR2_CMASK 0x28cf4
+#define CB_COLOR3_CMASK 0x28d30
+#define CB_COLOR4_CMASK 0x28d6c
+#define CB_COLOR5_CMASK 0x28da8
+#define CB_COLOR6_CMASK 0x28de4
+#define CB_COLOR7_CMASK 0x28e20
+
+#define CB_COLOR1_CMASK_SLICE 0x28cbc
+#define CB_COLOR2_CMASK_SLICE 0x28cf8
+#define CB_COLOR3_CMASK_SLICE 0x28d34
+#define CB_COLOR4_CMASK_SLICE 0x28d70
+#define CB_COLOR5_CMASK_SLICE 0x28dac
+#define CB_COLOR6_CMASK_SLICE 0x28de8
+#define CB_COLOR7_CMASK_SLICE 0x28e24
+
+#define CB_COLOR1_FMASK 0x28cc0
+#define CB_COLOR2_FMASK 0x28cfc
+#define CB_COLOR3_FMASK 0x28d38
+#define CB_COLOR4_FMASK 0x28d74
+#define CB_COLOR5_FMASK 0x28db0
+#define CB_COLOR6_FMASK 0x28dec
+#define CB_COLOR7_FMASK 0x28e28
+
+#define CB_COLOR1_FMASK_SLICE 0x28cc4
+#define CB_COLOR2_FMASK_SLICE 0x28d00
+#define CB_COLOR3_FMASK_SLICE 0x28d3c
+#define CB_COLOR4_FMASK_SLICE 0x28d78
+#define CB_COLOR5_FMASK_SLICE 0x28db4
+#define CB_COLOR6_FMASK_SLICE 0x28df0
+#define CB_COLOR7_FMASK_SLICE 0x28e2c
+
+#define CB_COLOR1_CLEAR_WORD0 0x28cc8
+#define CB_COLOR2_CLEAR_WORD0 0x28d04
+#define CB_COLOR3_CLEAR_WORD0 0x28d40
+#define CB_COLOR4_CLEAR_WORD0 0x28d7c
+#define CB_COLOR5_CLEAR_WORD0 0x28db8
+#define CB_COLOR6_CLEAR_WORD0 0x28df4
+#define CB_COLOR7_CLEAR_WORD0 0x28e30
+
+#define CB_COLOR1_CLEAR_WORD1 0x28ccc
+#define CB_COLOR2_CLEAR_WORD1 0x28d08
+#define CB_COLOR3_CLEAR_WORD1 0x28d44
+#define CB_COLOR4_CLEAR_WORD1 0x28d80
+#define CB_COLOR5_CLEAR_WORD1 0x28dbc
+#define CB_COLOR6_CLEAR_WORD1 0x28df8
+#define CB_COLOR7_CLEAR_WORD1 0x28e34
+
+#define CB_COLOR1_CLEAR_WORD2 0x28cd0
+#define CB_COLOR2_CLEAR_WORD2 0x28d0c
+#define CB_COLOR3_CLEAR_WORD2 0x28d48
+#define CB_COLOR4_CLEAR_WORD2 0x28d84
+#define CB_COLOR5_CLEAR_WORD2 0x28dc0
+#define CB_COLOR6_CLEAR_WORD2 0x28dfc
+#define CB_COLOR7_CLEAR_WORD2 0x28e38
+
+#define CB_COLOR1_CLEAR_WORD3 0x28cd4
+#define CB_COLOR2_CLEAR_WORD3 0x28d10
+#define CB_COLOR3_CLEAR_WORD3 0x28d4c
+#define CB_COLOR4_CLEAR_WORD3 0x28d88
+#define CB_COLOR5_CLEAR_WORD3 0x28dc4
+#define CB_COLOR6_CLEAR_WORD3 0x28e00
+#define CB_COLOR7_CLEAR_WORD3 0x28e3c
+
+#define SQ_TEX_RESOURCE_WORD0_0 0x30000
+#define SQ_TEX_RESOURCE_WORD1_0 0x30004
+# define TEX_ARRAY_MODE(x) ((x) << 28)
+#define SQ_TEX_RESOURCE_WORD2_0 0x30008
+#define SQ_TEX_RESOURCE_WORD3_0 0x3000C
+#define SQ_TEX_RESOURCE_WORD4_0 0x30010
+#define SQ_TEX_RESOURCE_WORD5_0 0x30014
+#define SQ_TEX_RESOURCE_WORD6_0 0x30018
+#define SQ_TEX_RESOURCE_WORD7_0 0x3001c
+
+
#endif
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index cc004b0..aab5ba0 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -162,6 +162,11 @@
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+ /* mid sh */
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
/* high sh */
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
@@ -172,6 +177,11 @@
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+ /* mid mh */
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
/* high mh */
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
@@ -1618,6 +1628,7 @@
case RADEON_TXFORMAT_RGB332:
case RADEON_TXFORMAT_Y8:
track->textures[i].cpp = 1;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case RADEON_TXFORMAT_AI88:
case RADEON_TXFORMAT_ARGB1555:
@@ -1629,12 +1640,14 @@
case RADEON_TXFORMAT_LDUDV655:
case RADEON_TXFORMAT_DUDV88:
track->textures[i].cpp = 2;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case RADEON_TXFORMAT_ARGB8888:
case RADEON_TXFORMAT_RGBA8888:
case RADEON_TXFORMAT_SHADOW32:
case RADEON_TXFORMAT_LDUDUV8888:
track->textures[i].cpp = 4;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case RADEON_TXFORMAT_DXT1:
track->textures[i].cpp = 1;
@@ -2341,6 +2354,7 @@
if (rdev->flags & RADEON_IS_IGP)
base = (RREG32(RADEON_NB_TOM) & 0xffff) << 16;
radeon_vram_location(rdev, &rdev->mc, base);
+ rdev->mc.gtt_base_align = 0;
if (!(rdev->flags & RADEON_IS_AGP))
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
@@ -2594,12 +2608,6 @@
int surf_index = reg * 16;
int flags = 0;
- /* r100/r200 divide by 16 */
- if (rdev->family < CHIP_R300)
- flags = pitch / 16;
- else
- flags = pitch / 8;
-
if (rdev->family <= CHIP_RS200) {
if ((tiling_flags & (RADEON_TILING_MACRO|RADEON_TILING_MICRO))
== (RADEON_TILING_MACRO|RADEON_TILING_MICRO))
@@ -2623,6 +2631,20 @@
if (tiling_flags & RADEON_TILING_SWAP_32BIT)
flags |= RADEON_SURF_AP0_SWP_32BPP | RADEON_SURF_AP1_SWP_32BPP;
+ /* when we aren't tiling the pitch seems to needs to be furtherdivided down. - tested on power5 + rn50 server */
+ if (tiling_flags & (RADEON_TILING_SWAP_16BIT | RADEON_TILING_SWAP_32BIT)) {
+ if (!(tiling_flags & (RADEON_TILING_MACRO | RADEON_TILING_MICRO)))
+ if (ASIC_IS_RN50(rdev))
+ pitch /= 16;
+ }
+
+ /* r100/r200 divide by 16 */
+ if (rdev->family < CHIP_R300)
+ flags |= pitch / 16;
+ else
+ flags |= pitch / 8;
+
+
DRM_DEBUG("writing surface %d %d %x %x\n", reg, flags, offset, offset+obj_size-1);
WREG32(RADEON_SURFACE0_INFO + surf_index, flags);
WREG32(RADEON_SURFACE0_LOWER_BOUND + surf_index, offset);
@@ -3137,33 +3159,6 @@
DRM_ERROR("compress format %d\n", t->compress_format);
}
-static int r100_cs_track_cube(struct radeon_device *rdev,
- struct r100_cs_track *track, unsigned idx)
-{
- unsigned face, w, h;
- struct radeon_bo *cube_robj;
- unsigned long size;
-
- for (face = 0; face < 5; face++) {
- cube_robj = track->textures[idx].cube_info[face].robj;
- w = track->textures[idx].cube_info[face].width;
- h = track->textures[idx].cube_info[face].height;
-
- size = w * h;
- size *= track->textures[idx].cpp;
-
- size += track->textures[idx].cube_info[face].offset;
-
- if (size > radeon_bo_size(cube_robj)) {
- DRM_ERROR("Cube texture offset greater than object size %lu %lu\n",
- size, radeon_bo_size(cube_robj));
- r100_cs_track_texture_print(&track->textures[idx]);
- return -1;
- }
- }
- return 0;
-}
-
static int r100_track_compress_size(int compress_format, int w, int h)
{
int block_width, block_height, block_bytes;
@@ -3194,6 +3189,37 @@
return sz;
}
+static int r100_cs_track_cube(struct radeon_device *rdev,
+ struct r100_cs_track *track, unsigned idx)
+{
+ unsigned face, w, h;
+ struct radeon_bo *cube_robj;
+ unsigned long size;
+ unsigned compress_format = track->textures[idx].compress_format;
+
+ for (face = 0; face < 5; face++) {
+ cube_robj = track->textures[idx].cube_info[face].robj;
+ w = track->textures[idx].cube_info[face].width;
+ h = track->textures[idx].cube_info[face].height;
+
+ if (compress_format) {
+ size = r100_track_compress_size(compress_format, w, h);
+ } else
+ size = w * h;
+ size *= track->textures[idx].cpp;
+
+ size += track->textures[idx].cube_info[face].offset;
+
+ if (size > radeon_bo_size(cube_robj)) {
+ DRM_ERROR("Cube texture offset greater than object size %lu %lu\n",
+ size, radeon_bo_size(cube_robj));
+ r100_cs_track_texture_print(&track->textures[idx]);
+ return -1;
+ }
+ }
+ return 0;
+}
+
static int r100_cs_track_texture_check(struct radeon_device *rdev,
struct r100_cs_track *track)
{
diff --git a/drivers/gpu/drm/radeon/r200.c b/drivers/gpu/drm/radeon/r200.c
index 85617c3..0266d72 100644
--- a/drivers/gpu/drm/radeon/r200.c
+++ b/drivers/gpu/drm/radeon/r200.c
@@ -415,6 +415,8 @@
/* 2D, 3D, CUBE */
switch (tmp) {
case 0:
+ case 3:
+ case 4:
case 5:
case 6:
case 7:
@@ -450,6 +452,7 @@
case R200_TXFORMAT_RGB332:
case R200_TXFORMAT_Y8:
track->textures[i].cpp = 1;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case R200_TXFORMAT_AI88:
case R200_TXFORMAT_ARGB1555:
@@ -461,6 +464,7 @@
case R200_TXFORMAT_DVDU88:
case R200_TXFORMAT_AVYU4444:
track->textures[i].cpp = 2;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case R200_TXFORMAT_ARGB8888:
case R200_TXFORMAT_RGBA8888:
@@ -468,6 +472,7 @@
case R200_TXFORMAT_BGR111110:
case R200_TXFORMAT_LDVDU8888:
track->textures[i].cpp = 4;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case R200_TXFORMAT_DXT1:
track->textures[i].cpp = 1;
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index b2f9efe..19a7ef7 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -481,6 +481,7 @@
if (rdev->flags & RADEON_IS_IGP)
base = (RREG32(RADEON_NB_TOM) & 0xffff) << 16;
radeon_vram_location(rdev, &rdev->mc, base);
+ rdev->mc.gtt_base_align = 0;
if (!(rdev->flags & RADEON_IS_AGP))
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
@@ -881,6 +882,7 @@
case R300_TX_FORMAT_Y4X4:
case R300_TX_FORMAT_Z3Y3X2:
track->textures[i].cpp = 1;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case R300_TX_FORMAT_X16:
case R300_TX_FORMAT_Y8X8:
@@ -892,6 +894,7 @@
case R300_TX_FORMAT_B8G8_B8G8:
case R300_TX_FORMAT_G8R8_G8B8:
track->textures[i].cpp = 2;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case R300_TX_FORMAT_Y16X16:
case R300_TX_FORMAT_Z11Y11X10:
@@ -902,14 +905,17 @@
case R300_TX_FORMAT_FL_I32:
case 0x1e:
track->textures[i].cpp = 4;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case R300_TX_FORMAT_W16Z16Y16X16:
case R300_TX_FORMAT_FL_R16G16B16A16:
case R300_TX_FORMAT_FL_I32A32:
track->textures[i].cpp = 8;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case R300_TX_FORMAT_FL_R32G32B32A32:
track->textures[i].cpp = 16;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case R300_TX_FORMAT_DXT1:
track->textures[i].cpp = 1;
@@ -1171,6 +1177,8 @@
int r;
track = kzalloc(sizeof(*track), GFP_KERNEL);
+ if (track == NULL)
+ return -ENOMEM;
r100_cs_track_clear(p->rdev, track);
p->track = track;
do {
diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c
index 4415a5e..e6c8914 100644
--- a/drivers/gpu/drm/radeon/r420.c
+++ b/drivers/gpu/drm/radeon/r420.c
@@ -45,9 +45,14 @@
rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_cm_idx = 0;
/* low sh */
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+ /* mid sh */
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
/* high sh */
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
@@ -58,6 +63,11 @@
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+ /* mid mh */
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
/* high mh */
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index 34330df..694af7c 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -125,6 +125,7 @@
r520_vram_get_type(rdev);
r100_vram_init_sizes(rdev);
radeon_vram_location(rdev, &rdev->mc, 0);
+ rdev->mc.gtt_base_align = 0;
if (!(rdev->flags & RADEON_IS_AGP))
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 44e96a2..e100f69 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -130,9 +130,14 @@
break;
}
}
- } else
- rdev->pm.requested_power_state_index =
- rdev->pm.current_power_state_index - 1;
+ } else {
+ if (rdev->pm.current_power_state_index == 0)
+ rdev->pm.requested_power_state_index =
+ rdev->pm.num_power_states - 1;
+ else
+ rdev->pm.requested_power_state_index =
+ rdev->pm.current_power_state_index - 1;
+ }
}
rdev->pm.requested_clock_mode_index = 0;
/* don't use the power state if crtcs are active and no display flag is set */
@@ -291,6 +296,11 @@
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+ /* mid sh */
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
/* high sh */
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = 1;
@@ -301,6 +311,11 @@
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+ /* mid mh */
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
/* high mh */
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = 1;
@@ -317,6 +332,11 @@
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 1;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+ /* mid sh */
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
/* high sh */
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 1;
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = 2;
@@ -327,6 +347,11 @@
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = 1;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+ /* mid mh */
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
/* high mh */
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 1;
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = 2;
@@ -343,6 +368,11 @@
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 2;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+ /* mid sh */
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 2;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 2;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
/* high sh */
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 2;
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = 3;
@@ -353,6 +383,11 @@
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+ /* mid mh */
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 2;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
/* high mh */
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 2;
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = 3;
@@ -375,6 +410,11 @@
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+ /* mid sh */
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
/* high sh */
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index;
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
@@ -385,6 +425,11 @@
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+ /* mid mh */
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
/* high mh */
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index;
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
@@ -401,7 +446,12 @@
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = 1;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 1;
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+ /* mid sh */
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
/* high sh */
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 1;
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = 1;
@@ -411,7 +461,12 @@
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = 2;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = 2;
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+ /* low mh */
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 2;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = 2;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
/* high mh */
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 2;
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = 2;
@@ -430,14 +485,30 @@
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx =
r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
} else {
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx =
r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx =
r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+ }
+ /* mid sh */
+ if (rdev->flags & RADEON_IS_MOBILITY) {
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx =
+ r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx =
+ r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
+ } else {
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx =
+ r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx =
+ r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
}
/* high sh */
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx =
@@ -453,14 +524,30 @@
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx =
r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 2;
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
} else {
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx =
r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx =
r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 1;
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+ }
+ /* mid mh */
+ if (rdev->flags & RADEON_IS_MOBILITY) {
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx =
+ r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx =
+ r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
+ } else {
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx =
+ r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx =
+ r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
}
/* high mh */
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx =
@@ -475,7 +562,18 @@
void r600_pm_misc(struct radeon_device *rdev)
{
+ int req_ps_idx = rdev->pm.requested_power_state_index;
+ int req_cm_idx = rdev->pm.requested_clock_mode_index;
+ struct radeon_power_state *ps = &rdev->pm.power_state[req_ps_idx];
+ struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage;
+ if ((voltage->type == VOLTAGE_SW) && voltage->voltage) {
+ if (voltage->voltage != rdev->pm.current_vddc) {
+ radeon_atom_set_voltage(rdev, voltage->voltage);
+ rdev->pm.current_vddc = voltage->voltage;
+ DRM_DEBUG("Setting: v: %d\n", voltage->voltage);
+ }
+ }
}
bool r600_gui_idle(struct radeon_device *rdev)
@@ -1004,7 +1102,7 @@
WREG32(MC_VM_FB_LOCATION, tmp);
WREG32(HDP_NONSURFACE_BASE, (rdev->mc.vram_start >> 8));
WREG32(HDP_NONSURFACE_INFO, (2 << 7));
- WREG32(HDP_NONSURFACE_SIZE, rdev->mc.mc_vram_size | 0x3FF);
+ WREG32(HDP_NONSURFACE_SIZE, 0x3FFFFFFF);
if (rdev->flags & RADEON_IS_AGP) {
WREG32(MC_VM_AGP_TOP, rdev->mc.gtt_end >> 22);
WREG32(MC_VM_AGP_BOT, rdev->mc.gtt_start >> 22);
@@ -1081,6 +1179,7 @@
if (rdev->flags & RADEON_IS_IGP)
base = (RREG32(MC_VM_FB_LOCATION) & 0xFFFF) << 24;
radeon_vram_location(rdev, &rdev->mc, base);
+ rdev->mc.gtt_base_align = 0;
radeon_gtt_location(rdev, mc);
}
}
@@ -1126,8 +1225,10 @@
rdev->mc.visible_vram_size = rdev->mc.aper_size;
r600_vram_gtt_location(rdev, &rdev->mc);
- if (rdev->flags & RADEON_IS_IGP)
+ if (rdev->flags & RADEON_IS_IGP) {
+ rs690_pm_info(rdev);
rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
+ }
radeon_update_bandwidth_info(rdev);
return 0;
}
diff --git a/drivers/gpu/drm/radeon/r600_blit.c b/drivers/gpu/drm/radeon/r600_blit.c
index f4fb88e..ca5c29f 100644
--- a/drivers/gpu/drm/radeon/r600_blit.c
+++ b/drivers/gpu/drm/radeon/r600_blit.c
@@ -538,9 +538,12 @@
r600_prepare_blit_copy(struct drm_device *dev, struct drm_file *file_priv)
{
drm_radeon_private_t *dev_priv = dev->dev_private;
+ int ret;
DRM_DEBUG("\n");
- r600_nomm_get_vb(dev);
+ ret = r600_nomm_get_vb(dev);
+ if (ret)
+ return ret;
dev_priv->blit_vb->file_priv = file_priv;
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 66a37fb..2f94dc6 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -176,6 +176,8 @@
void radeon_pm_resume(struct radeon_device *rdev);
void radeon_combios_get_power_modes(struct radeon_device *rdev);
void radeon_atombios_get_power_modes(struct radeon_device *rdev);
+void radeon_atom_set_voltage(struct radeon_device *rdev, u16 level);
+void rs690_pm_info(struct radeon_device *rdev);
/*
* Fences.
@@ -349,6 +351,7 @@
int vram_mtrr;
bool vram_is_ddr;
bool igp_sideport_enabled;
+ u64 gtt_base_align;
};
bool radeon_combios_sideport_present(struct radeon_device *rdev);
@@ -576,6 +579,7 @@
*/
int radeon_agp_init(struct radeon_device *rdev);
void radeon_agp_resume(struct radeon_device *rdev);
+void radeon_agp_suspend(struct radeon_device *rdev);
void radeon_agp_fini(struct radeon_device *rdev);
@@ -617,7 +621,8 @@
DYNPM_STATE_DISABLED,
DYNPM_STATE_MINIMUM,
DYNPM_STATE_PAUSED,
- DYNPM_STATE_ACTIVE
+ DYNPM_STATE_ACTIVE,
+ DYNPM_STATE_SUSPENDED,
};
enum radeon_dynpm_action {
DYNPM_ACTION_NONE,
@@ -646,15 +651,18 @@
PM_PROFILE_DEFAULT,
PM_PROFILE_AUTO,
PM_PROFILE_LOW,
+ PM_PROFILE_MID,
PM_PROFILE_HIGH,
};
#define PM_PROFILE_DEFAULT_IDX 0
#define PM_PROFILE_LOW_SH_IDX 1
-#define PM_PROFILE_HIGH_SH_IDX 2
-#define PM_PROFILE_LOW_MH_IDX 3
-#define PM_PROFILE_HIGH_MH_IDX 4
-#define PM_PROFILE_MAX 5
+#define PM_PROFILE_MID_SH_IDX 2
+#define PM_PROFILE_HIGH_SH_IDX 3
+#define PM_PROFILE_LOW_MH_IDX 4
+#define PM_PROFILE_MID_MH_IDX 5
+#define PM_PROFILE_HIGH_MH_IDX 6
+#define PM_PROFILE_MAX 7
struct radeon_pm_profile {
int dpms_off_ps_idx;
@@ -743,6 +751,7 @@
int default_power_state_index;
u32 current_sclk;
u32 current_mclk;
+ u32 current_vddc;
struct radeon_i2c_chan *i2c_bus;
/* selected pm method */
enum radeon_pm_method pm_method;
diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c
index 28e473f..f40dfb7 100644
--- a/drivers/gpu/drm/radeon/radeon_agp.c
+++ b/drivers/gpu/drm/radeon/radeon_agp.c
@@ -270,3 +270,8 @@
}
#endif
}
+
+void radeon_agp_suspend(struct radeon_device *rdev)
+{
+ radeon_agp_fini(rdev);
+}
diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c
index e57df08..646f96f 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.c
+++ b/drivers/gpu/drm/radeon/radeon_asic.c
@@ -724,8 +724,8 @@
.irq_set = &evergreen_irq_set,
.irq_process = &evergreen_irq_process,
.get_vblank_counter = &evergreen_get_vblank_counter,
- .fence_ring_emit = NULL,
- .cs_parse = NULL,
+ .fence_ring_emit = &r600_fence_ring_emit,
+ .cs_parse = &evergreen_cs_parse,
.copy_blit = NULL,
.copy_dma = NULL,
.copy = NULL,
@@ -780,6 +780,13 @@
case CHIP_R423:
case CHIP_RV410:
rdev->asic = &r420_asic;
+ /* handle macs */
+ if (rdev->bios == NULL) {
+ rdev->asic->get_engine_clock = &radeon_legacy_get_engine_clock;
+ rdev->asic->set_engine_clock = &radeon_legacy_set_engine_clock;
+ rdev->asic->get_memory_clock = &radeon_legacy_get_memory_clock;
+ rdev->asic->set_memory_clock = NULL;
+ }
break;
case CHIP_RS400:
case CHIP_RS480:
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index 5c40a3d..c0bbaa6 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -314,6 +314,7 @@
u32 evergreen_get_vblank_counter(struct radeon_device *rdev, int crtc);
int evergreen_irq_set(struct radeon_device *rdev);
int evergreen_irq_process(struct radeon_device *rdev);
+extern int evergreen_cs_parse(struct radeon_cs_parser *p);
extern void evergreen_pm_misc(struct radeon_device *rdev);
extern void evergreen_pm_prepare(struct radeon_device *rdev);
extern void evergreen_pm_finish(struct radeon_device *rdev);
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 6e733fd..10673ae 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -280,6 +280,15 @@
}
}
+ /* ASUS HD 3600 board lists the DVI port as HDMI */
+ if ((dev->pdev->device == 0x9598) &&
+ (dev->pdev->subsystem_vendor == 0x1043) &&
+ (dev->pdev->subsystem_device == 0x01e4)) {
+ if (*connector_type == DRM_MODE_CONNECTOR_HDMIA) {
+ *connector_type = DRM_MODE_CONNECTOR_DVII;
+ }
+ }
+
/* ASUS HD 3450 board lists the DVI port as HDMI */
if ((dev->pdev->device == 0x95C5) &&
(dev->pdev->subsystem_vendor == 0x1043) &&
@@ -680,11 +689,19 @@
uint8_t dac;
union atom_supported_devices *supported_devices;
int i, j, max_device;
- struct bios_connector bios_connectors[ATOM_MAX_SUPPORTED_DEVICE];
+ struct bios_connector *bios_connectors;
+ size_t bc_size = sizeof(*bios_connectors) * ATOM_MAX_SUPPORTED_DEVICE;
- if (!atom_parse_data_header(ctx, index, &size, &frev, &crev, &data_offset))
+ bios_connectors = kzalloc(bc_size, GFP_KERNEL);
+ if (!bios_connectors)
return false;
+ if (!atom_parse_data_header(ctx, index, &size, &frev, &crev,
+ &data_offset)) {
+ kfree(bios_connectors);
+ return false;
+ }
+
supported_devices =
(union atom_supported_devices *)(ctx->bios + data_offset);
@@ -851,6 +868,7 @@
radeon_link_encoder_connector(dev);
+ kfree(bios_connectors);
return true;
}
@@ -1020,8 +1038,15 @@
data_offset);
switch (crev) {
case 1:
- if (igp_info->info.ucMemoryType & 0xf0)
- return true;
+ /* AMD IGPS */
+ if ((rdev->family == CHIP_RS690) ||
+ (rdev->family == CHIP_RS740)) {
+ if (igp_info->info.ulBootUpMemoryClock)
+ return true;
+ } else {
+ if (igp_info->info.ucMemoryType & 0xf0)
+ return true;
+ }
break;
case 2:
if (igp_info->info_2.ucMemoryType & 0x0f)
@@ -1529,7 +1554,8 @@
rdev->pm.power_state[state_index].pcie_lanes =
power_info->info.asPowerPlayInfo[i].ucNumPciELanes;
misc = le32_to_cpu(power_info->info.asPowerPlayInfo[i].ulMiscInfo);
- if (misc & ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT) {
+ if ((misc & ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT) ||
+ (misc & ATOM_PM_MISCINFO_VOLTAGE_DROP_ACTIVE_HIGH)) {
rdev->pm.power_state[state_index].clock_info[0].voltage.type =
VOLTAGE_GPIO;
rdev->pm.power_state[state_index].clock_info[0].voltage.gpio =
@@ -1596,7 +1622,8 @@
power_info->info_2.asPowerPlayInfo[i].ucNumPciELanes;
misc = le32_to_cpu(power_info->info_2.asPowerPlayInfo[i].ulMiscInfo);
misc2 = le32_to_cpu(power_info->info_2.asPowerPlayInfo[i].ulMiscInfo2);
- if (misc & ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT) {
+ if ((misc & ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT) ||
+ (misc & ATOM_PM_MISCINFO_VOLTAGE_DROP_ACTIVE_HIGH)) {
rdev->pm.power_state[state_index].clock_info[0].voltage.type =
VOLTAGE_GPIO;
rdev->pm.power_state[state_index].clock_info[0].voltage.gpio =
@@ -1670,7 +1697,8 @@
power_info->info_3.asPowerPlayInfo[i].ucNumPciELanes;
misc = le32_to_cpu(power_info->info_3.asPowerPlayInfo[i].ulMiscInfo);
misc2 = le32_to_cpu(power_info->info_3.asPowerPlayInfo[i].ulMiscInfo2);
- if (misc & ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT) {
+ if ((misc & ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT) ||
+ (misc & ATOM_PM_MISCINFO_VOLTAGE_DROP_ACTIVE_HIGH)) {
rdev->pm.power_state[state_index].clock_info[0].voltage.type =
VOLTAGE_GPIO;
rdev->pm.power_state[state_index].clock_info[0].voltage.gpio =
@@ -1746,9 +1774,22 @@
rdev->pm.power_state[state_index].misc2 = 0;
}
} else {
+ int fw_index = GetIndexIntoMasterTable(DATA, FirmwareInfo);
+ uint8_t fw_frev, fw_crev;
+ uint16_t fw_data_offset, vddc = 0;
+ union firmware_info *firmware_info;
+ ATOM_PPLIB_THERMALCONTROLLER *controller = &power_info->info_4.sThermalController;
+
+ if (atom_parse_data_header(mode_info->atom_context, fw_index, NULL,
+ &fw_frev, &fw_crev, &fw_data_offset)) {
+ firmware_info =
+ (union firmware_info *)(mode_info->atom_context->bios +
+ fw_data_offset);
+ vddc = firmware_info->info_14.usBootUpVDDCVoltage;
+ }
+
/* add the i2c bus for thermal/fan chip */
/* no support for internal controller yet */
- ATOM_PPLIB_THERMALCONTROLLER *controller = &power_info->info_4.sThermalController;
if (controller->ucType > 0) {
if ((controller->ucType == ATOM_PP_THERMALCONTROLLER_RV6xx) ||
(controller->ucType == ATOM_PP_THERMALCONTROLLER_RV770) ||
@@ -1808,10 +1849,7 @@
/* skip invalid modes */
if (rdev->pm.power_state[state_index].clock_info[mode_index].sclk == 0)
continue;
- rdev->pm.power_state[state_index].clock_info[mode_index].voltage.type =
- VOLTAGE_SW;
- rdev->pm.power_state[state_index].clock_info[mode_index].voltage.voltage =
- clock_info->usVDDC;
+ /* voltage works differently on IGPs */
mode_index++;
} else if (ASIC_IS_DCE4(rdev)) {
struct _ATOM_PPLIB_EVERGREEN_CLOCK_INFO *clock_info =
@@ -1895,6 +1933,16 @@
rdev->pm.default_power_state_index = state_index;
rdev->pm.power_state[state_index].default_clock_mode =
&rdev->pm.power_state[state_index].clock_info[mode_index - 1];
+ /* patch the table values with the default slck/mclk from firmware info */
+ for (j = 0; j < mode_index; j++) {
+ rdev->pm.power_state[state_index].clock_info[j].mclk =
+ rdev->clock.default_mclk;
+ rdev->pm.power_state[state_index].clock_info[j].sclk =
+ rdev->clock.default_sclk;
+ if (vddc)
+ rdev->pm.power_state[state_index].clock_info[j].voltage.voltage =
+ vddc;
+ }
}
state_index++;
}
@@ -1934,6 +1982,7 @@
rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
rdev->pm.current_clock_mode_index = 0;
+ rdev->pm.current_vddc = rdev->pm.power_state[rdev->pm.default_power_state_index].clock_info[0].voltage.voltage;
}
void radeon_atom_set_clock_gating(struct radeon_device *rdev, int enable)
@@ -1989,6 +2038,42 @@
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
}
+union set_voltage {
+ struct _SET_VOLTAGE_PS_ALLOCATION alloc;
+ struct _SET_VOLTAGE_PARAMETERS v1;
+ struct _SET_VOLTAGE_PARAMETERS_V2 v2;
+};
+
+void radeon_atom_set_voltage(struct radeon_device *rdev, u16 level)
+{
+ union set_voltage args;
+ int index = GetIndexIntoMasterTable(COMMAND, SetVoltage);
+ u8 frev, crev, volt_index = level;
+
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+ return;
+
+ switch (crev) {
+ case 1:
+ args.v1.ucVoltageType = SET_VOLTAGE_TYPE_ASIC_VDDC;
+ args.v1.ucVoltageMode = SET_ASIC_VOLTAGE_MODE_ALL_SOURCE;
+ args.v1.ucVoltageIndex = volt_index;
+ break;
+ case 2:
+ args.v2.ucVoltageType = SET_VOLTAGE_TYPE_ASIC_VDDC;
+ args.v2.ucVoltageMode = SET_ASIC_VOLTAGE_MODE_SET_VOLTAGE;
+ args.v2.usVoltageLevel = cpu_to_le16(level);
+ break;
+ default:
+ DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+ return;
+ }
+
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+
+
void radeon_atom_initialize_bios_scratch_regs(struct drm_device *dev)
{
struct radeon_device *rdev = dev->dev_private;
diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index fbba938..2c92137 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -48,6 +48,10 @@
resource_size_t vram_base;
resource_size_t size = 256 * 1024; /* ??? */
+ if (!(rdev->flags & RADEON_IS_IGP))
+ if (!radeon_card_posted(rdev))
+ return false;
+
rdev->bios = NULL;
vram_base = drm_get_resource_start(rdev->ddev, 0);
bios = ioremap(vram_base, size);
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index 7b5e10d..d1c1d8d 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -1411,6 +1411,11 @@
rdev->mode_info.connector_table = CT_IMAC_G5_ISIGHT;
} else
#endif /* CONFIG_PPC_PMAC */
+#ifdef CONFIG_PPC64
+ if (ASIC_IS_RN50(rdev))
+ rdev->mode_info.connector_table = CT_RN50_POWER;
+ else
+#endif
rdev->mode_info.connector_table = CT_GENERIC;
}
@@ -1853,6 +1858,33 @@
CONNECTOR_OBJECT_ID_SVIDEO,
&hpd);
break;
+ case CT_RN50_POWER:
+ DRM_INFO("Connector Table: %d (rn50-power)\n",
+ rdev->mode_info.connector_table);
+ /* VGA - primary dac */
+ ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_VGA_DDC);
+ hpd.hpd = RADEON_HPD_NONE;
+ radeon_add_legacy_encoder(dev,
+ radeon_get_encoder_id(dev,
+ ATOM_DEVICE_CRT1_SUPPORT,
+ 1),
+ ATOM_DEVICE_CRT1_SUPPORT);
+ radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_CRT1_SUPPORT,
+ DRM_MODE_CONNECTOR_VGA, &ddc_i2c,
+ CONNECTOR_OBJECT_ID_VGA,
+ &hpd);
+ ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_CRT2_DDC);
+ hpd.hpd = RADEON_HPD_NONE;
+ radeon_add_legacy_encoder(dev,
+ radeon_get_encoder_id(dev,
+ ATOM_DEVICE_CRT2_SUPPORT,
+ 2),
+ ATOM_DEVICE_CRT2_SUPPORT);
+ radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT,
+ DRM_MODE_CONNECTOR_VGA, &ddc_i2c,
+ CONNECTOR_OBJECT_ID_VGA,
+ &hpd);
+ break;
default:
DRM_INFO("Connector table: %d (invalid)\n",
rdev->mode_info.connector_table);
@@ -1906,15 +1938,6 @@
return false;
}
- /* Some RV100 cards with 2 VGA ports show up with DVI+VGA */
- if (dev->pdev->device == 0x5159 &&
- dev->pdev->subsystem_vendor == 0x1002 &&
- dev->pdev->subsystem_device == 0x013a) {
- if (*legacy_connector == CONNECTOR_DVI_I_LEGACY)
- *legacy_connector = CONNECTOR_CRT_LEGACY;
-
- }
-
/* X300 card with extra non-existent DVI port */
if (dev->pdev->device == 0x5B60 &&
dev->pdev->subsystem_vendor == 0x17af &&
@@ -2026,6 +2049,7 @@
combios_setup_i2c_bus(rdev, RADEON_GPIO_CRT2_DDC);
break;
default:
+ ddc_i2c.valid = false;
break;
}
@@ -2339,6 +2363,7 @@
if (RBIOS8(tv_info + 6) == 'T') {
if (radeon_apply_legacy_tv_quirks(dev)) {
hpd.hpd = RADEON_HPD_NONE;
+ ddc_i2c.valid = false;
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id
(dev,
@@ -2454,7 +2479,12 @@
rdev->pm.power_state[state_index].clock_info[0].mclk = rdev->clock.default_mclk;
rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk;
rdev->pm.power_state[state_index].default_clock_mode = &rdev->pm.power_state[state_index].clock_info[0];
- rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
+ if ((state_index > 0) &&
+ (rdev->pm.power_state[0].clock_info[0].voltage.type == VOLTAGE_GPIO))
+ rdev->pm.power_state[state_index].clock_info[0].voltage =
+ rdev->pm.power_state[0].clock_info[0].voltage;
+ else
+ rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
rdev->pm.power_state[state_index].pcie_lanes = 16;
rdev->pm.power_state[state_index].flags = 0;
rdev->pm.default_power_state_index = state_index;
@@ -3012,6 +3042,14 @@
combios_write_ram_size(dev);
}
+ /* quirk for rs4xx HP nx6125 laptop to make it resume
+ * - it hangs on resume inside the dynclk 1 table.
+ */
+ if (rdev->family == CHIP_RS480 &&
+ rdev->pdev->subsystem_vendor == 0x103c &&
+ rdev->pdev->subsystem_device == 0x308b)
+ return;
+
/* DYN CLK 1 */
table = combios_get_table_offset(dev, COMBIOS_DYN_CLK_1_TABLE);
if (table)
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 0c7ccc6..adccbc2 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -771,30 +771,27 @@
} else
ret = connector_status_connected;
- /* multiple connectors on the same encoder with the same ddc line
- * This tends to be HDMI and DVI on the same encoder with the
- * same ddc line. If the edid says HDMI, consider the HDMI port
- * connected and the DVI port disconnected. If the edid doesn't
- * say HDMI, vice versa.
+ /* This gets complicated. We have boards with VGA + HDMI with a
+ * shared DDC line and we have boards with DVI-D + HDMI with a shared
+ * DDC line. The latter is more complex because with DVI<->HDMI adapters
+ * you don't really know what's connected to which port as both are digital.
*/
if (radeon_connector->shared_ddc && (ret == connector_status_connected)) {
struct drm_device *dev = connector->dev;
+ struct radeon_device *rdev = dev->dev_private;
struct drm_connector *list_connector;
struct radeon_connector *list_radeon_connector;
list_for_each_entry(list_connector, &dev->mode_config.connector_list, head) {
if (connector == list_connector)
continue;
list_radeon_connector = to_radeon_connector(list_connector);
- if (radeon_connector->devices == list_radeon_connector->devices) {
- if (drm_detect_hdmi_monitor(radeon_connector->edid)) {
- if (connector->connector_type == DRM_MODE_CONNECTOR_DVID) {
- kfree(radeon_connector->edid);
- radeon_connector->edid = NULL;
- ret = connector_status_disconnected;
- }
- } else {
- if ((connector->connector_type == DRM_MODE_CONNECTOR_HDMIA) ||
- (connector->connector_type == DRM_MODE_CONNECTOR_HDMIB)) {
+ if (list_radeon_connector->shared_ddc &&
+ (list_radeon_connector->ddc_bus->rec.i2c_id ==
+ radeon_connector->ddc_bus->rec.i2c_id)) {
+ /* cases where both connectors are digital */
+ if (list_connector->connector_type != DRM_MODE_CONNECTOR_VGA) {
+ /* hpd is our only option in this case */
+ if (!radeon_hpd_sense(rdev, radeon_connector->hpd.hpd)) {
kfree(radeon_connector->edid);
radeon_connector->edid = NULL;
ret = connector_status_disconnected;
diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c
index b7023ff..4eb67c0 100644
--- a/drivers/gpu/drm/radeon/radeon_cursor.c
+++ b/drivers/gpu/drm/radeon/radeon_cursor.c
@@ -194,7 +194,7 @@
fail:
drm_gem_object_unreference_unlocked(obj);
- return 0;
+ return ret;
}
int radeon_crtc_cursor_move(struct drm_crtc *crtc,
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index a20b612..dd279da 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -226,20 +226,20 @@
{
u64 size_af, size_bf;
- size_af = 0xFFFFFFFF - mc->vram_end;
- size_bf = mc->vram_start;
+ size_af = ((0xFFFFFFFF - mc->vram_end) + mc->gtt_base_align) & ~mc->gtt_base_align;
+ size_bf = mc->vram_start & ~mc->gtt_base_align;
if (size_bf > size_af) {
if (mc->gtt_size > size_bf) {
dev_warn(rdev->dev, "limiting GTT\n");
mc->gtt_size = size_bf;
}
- mc->gtt_start = mc->vram_start - mc->gtt_size;
+ mc->gtt_start = (mc->vram_start & ~mc->gtt_base_align) - mc->gtt_size;
} else {
if (mc->gtt_size > size_af) {
dev_warn(rdev->dev, "limiting GTT\n");
mc->gtt_size = size_af;
}
- mc->gtt_start = mc->vram_end + 1;
+ mc->gtt_start = (mc->vram_end + 1 + mc->gtt_base_align) & ~mc->gtt_base_align;
}
mc->gtt_end = mc->gtt_start + mc->gtt_size - 1;
dev_info(rdev->dev, "GTT: %lluM 0x%08llX - 0x%08llX\n",
@@ -546,8 +546,10 @@
/* don't suspend or resume card normally */
rdev->powered_down = false;
radeon_resume_kms(dev);
+ drm_kms_helper_poll_enable(dev);
} else {
printk(KERN_INFO "radeon: switched off\n");
+ drm_kms_helper_poll_disable(dev);
radeon_suspend_kms(dev, pmm);
/* don't suspend or resume card normally */
rdev->powered_down = true;
@@ -711,6 +713,7 @@
{
struct radeon_device *rdev;
struct drm_crtc *crtc;
+ struct drm_connector *connector;
int r;
if (dev == NULL || dev->dev_private == NULL) {
@@ -723,6 +726,12 @@
if (rdev->powered_down)
return 0;
+
+ /* turn off display hw */
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
+ }
+
/* unpin the front buffers */
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct radeon_framebuffer *rfb = to_radeon_framebuffer(crtc->fb);
@@ -754,6 +763,8 @@
/* evict remaining vram memory */
radeon_bo_evict_vram(rdev);
+ radeon_agp_suspend(rdev);
+
pci_save_state(dev->pdev);
if (state.event == PM_EVENT_SUSPEND) {
/* Shut down the device */
@@ -768,6 +779,7 @@
int radeon_resume_kms(struct drm_device *dev)
{
+ struct drm_connector *connector;
struct radeon_device *rdev = dev->dev_private;
if (rdev->powered_down)
@@ -786,6 +798,12 @@
radeon_resume(rdev);
radeon_pm_resume(rdev);
radeon_restore_bios_scratch_regs(rdev);
+
+ /* turn on display hw */
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
+ }
+
radeon_fbdev_set_suspend(rdev, 0);
release_console_sem();
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 1006549..8154cdf 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -284,8 +284,7 @@
"eDP",
};
-static const char *hpd_names[7] = {
- "NONE",
+static const char *hpd_names[6] = {
"HPD1",
"HPD2",
"HPD3",
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 902d173..e166fe4 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -45,9 +45,10 @@
* - 2.2.0 - add r6xx/r7xx const buffer support
* - 2.3.0 - add MSPOS + 3D texture + r500 VAP regs
* - 2.4.0 - add crtc id query
+ * - 2.5.0 - add get accel 2 to work around ddx breakage for evergreen
*/
#define KMS_DRIVER_MAJOR 2
-#define KMS_DRIVER_MINOR 4
+#define KMS_DRIVER_MINOR 5
#define KMS_DRIVER_PATCHLEVEL 0
int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags);
int radeon_driver_unload_kms(struct drm_device *dev);
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index 1ebb100..e0b30b2 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -1072,6 +1072,8 @@
if (is_dig) {
switch (mode) {
case DRM_MODE_DPMS_ON:
+ if (!ASIC_IS_DCE4(rdev))
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) {
struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
@@ -1079,8 +1081,6 @@
if (ASIC_IS_DCE4(rdev))
atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_ON);
}
- if (!ASIC_IS_DCE4(rdev))
- atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
break;
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index e192acf..dc1634b 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -363,6 +363,7 @@
{
struct radeon_fbdev *rfbdev;
int bpp_sel = 32;
+ int ret;
/* select 8 bpp console on RN50 or 16MB cards */
if (ASIC_IS_RN50(rdev) || rdev->mc.real_vram_size <= (32*1024*1024))
@@ -376,9 +377,14 @@
rdev->mode_info.rfbdev = rfbdev;
rfbdev->helper.funcs = &radeon_fb_helper_funcs;
- drm_fb_helper_init(rdev->ddev, &rfbdev->helper,
- rdev->num_crtc,
- RADEONFB_CONN_LIMIT);
+ ret = drm_fb_helper_init(rdev->ddev, &rfbdev->helper,
+ rdev->num_crtc,
+ RADEONFB_CONN_LIMIT);
+ if (ret) {
+ kfree(rfbdev);
+ return ret;
+ }
+
drm_fb_helper_single_add_all_connectors(&rfbdev->helper);
drm_fb_helper_initial_config(&rfbdev->helper, bpp_sel);
return 0;
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 0406835..6a70c0d 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -118,7 +118,11 @@
value = rdev->num_z_pipes;
break;
case RADEON_INFO_ACCEL_WORKING:
- value = rdev->accel_working;
+ /* xf86-video-ati 6.13.0 relies on this being false for evergreen */
+ if ((rdev->family >= CHIP_CEDAR) && (rdev->family <= CHIP_HEMLOCK))
+ value = false;
+ else
+ value = rdev->accel_working;
break;
case RADEON_INFO_CRTC_FROM_ID:
for (i = 0, found = 0; i < rdev->num_crtc; i++) {
@@ -134,6 +138,9 @@
return -EINVAL;
}
break;
+ case RADEON_INFO_ACCEL_WORKING2:
+ value = rdev->accel_working;
+ break;
default:
DRM_DEBUG("Invalid request %d\n", info->request);
return -EINVAL;
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
index 5a13b3e..bad77f4 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -928,16 +928,14 @@
if (ASIC_IS_R300(rdev)) {
gpiopad_a = RREG32(RADEON_GPIOPAD_A) | 1;
disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL);
- }
-
- if (rdev->family == CHIP_R200 || ASIC_IS_R300(rdev))
- disp_tv_out_cntl = RREG32(RADEON_DISP_TV_OUT_CNTL);
- else
+ } else if (rdev->family != CHIP_R200)
disp_hw_debug = RREG32(RADEON_DISP_HW_DEBUG);
-
- if (rdev->family == CHIP_R200)
+ else if (rdev->family == CHIP_R200)
fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
+ if (rdev->family >= CHIP_R200)
+ disp_tv_out_cntl = RREG32(RADEON_DISP_TV_OUT_CNTL);
+
if (is_tv) {
uint32_t dac_cntl;
@@ -1002,15 +1000,13 @@
if (ASIC_IS_R300(rdev)) {
WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1);
WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl);
- }
+ } else if (rdev->family != CHIP_R200)
+ WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
+ else if (rdev->family == CHIP_R200)
+ WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl);
if (rdev->family >= CHIP_R200)
WREG32(RADEON_DISP_TV_OUT_CNTL, disp_tv_out_cntl);
- else
- WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
-
- if (rdev->family == CHIP_R200)
- WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl);
if (is_tv)
radeon_legacy_tv_mode_set(encoder, mode, adjusted_mode);
@@ -1168,6 +1164,17 @@
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_tv_dac *tv_dac = radeon_encoder->enc_priv;
bool color = true;
+ struct drm_crtc *crtc;
+
+ /* find out if crtc2 is in use or if this encoder is using it */
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ if ((radeon_crtc->crtc_id == 1) && crtc->enabled) {
+ if (encoder->crtc != crtc) {
+ return connector_status_disconnected;
+ }
+ }
+ }
if (connector->connector_type == DRM_MODE_CONNECTOR_SVIDEO ||
connector->connector_type == DRM_MODE_CONNECTOR_Composite ||
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_tv.c b/drivers/gpu/drm/radeon/radeon_legacy_tv.c
index f2ed27c..0320403 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_tv.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_tv.c
@@ -642,8 +642,8 @@
}
flicker_removal = (tmp + 500) / 1000;
- if (flicker_removal < 2)
- flicker_removal = 2;
+ if (flicker_removal < 3)
+ flicker_removal = 3;
for (i = 0; i < ARRAY_SIZE(SLOPE_limit); ++i) {
if (flicker_removal == SLOPE_limit[i])
break;
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 67358baf..95696aa 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -206,6 +206,7 @@
CT_MINI_INTERNAL,
CT_IMAC_G5_ISIGHT,
CT_EMAC,
+ CT_RN50_POWER,
};
enum radeon_dvo_chip {
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index a8d162c..115d26b 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -33,6 +33,14 @@
#define RADEON_WAIT_VBLANK_TIMEOUT 200
#define RADEON_WAIT_IDLE_TIMEOUT 200
+static const char *radeon_pm_state_type_name[5] = {
+ "Default",
+ "Powersave",
+ "Battery",
+ "Balanced",
+ "Performance",
+};
+
static void radeon_dynpm_idle_work_handler(struct work_struct *work);
static int radeon_debugfs_pm_init(struct radeon_device *rdev);
static bool radeon_pm_in_vbl(struct radeon_device *rdev);
@@ -84,9 +92,9 @@
rdev->pm.profile_index = PM_PROFILE_HIGH_SH_IDX;
} else {
if (rdev->pm.active_crtc_count > 1)
- rdev->pm.profile_index = PM_PROFILE_LOW_MH_IDX;
+ rdev->pm.profile_index = PM_PROFILE_MID_MH_IDX;
else
- rdev->pm.profile_index = PM_PROFILE_LOW_SH_IDX;
+ rdev->pm.profile_index = PM_PROFILE_MID_SH_IDX;
}
break;
case PM_PROFILE_LOW:
@@ -95,6 +103,12 @@
else
rdev->pm.profile_index = PM_PROFILE_LOW_SH_IDX;
break;
+ case PM_PROFILE_MID:
+ if (rdev->pm.active_crtc_count > 1)
+ rdev->pm.profile_index = PM_PROFILE_MID_MH_IDX;
+ else
+ rdev->pm.profile_index = PM_PROFILE_MID_SH_IDX;
+ break;
case PM_PROFILE_HIGH:
if (rdev->pm.active_crtc_count > 1)
rdev->pm.profile_index = PM_PROFILE_HIGH_MH_IDX;
@@ -127,15 +141,6 @@
if (bo->tbo.mem.mem_type == TTM_PL_VRAM)
ttm_bo_unmap_virtual(&bo->tbo);
}
-
- if (rdev->gart.table.vram.robj)
- ttm_bo_unmap_virtual(&rdev->gart.table.vram.robj->tbo);
-
- if (rdev->stollen_vga_memory)
- ttm_bo_unmap_virtual(&rdev->stollen_vga_memory->tbo);
-
- if (rdev->r600_blit.shader_obj)
- ttm_bo_unmap_virtual(&rdev->r600_blit.shader_obj->tbo);
}
static void radeon_sync_with_vblank(struct radeon_device *rdev)
@@ -151,6 +156,7 @@
static void radeon_set_power_state(struct radeon_device *rdev)
{
u32 sclk, mclk;
+ bool misc_after = false;
if ((rdev->pm.requested_clock_mode_index == rdev->pm.current_clock_mode_index) &&
(rdev->pm.requested_power_state_index == rdev->pm.current_power_state_index))
@@ -167,55 +173,47 @@
if (mclk > rdev->clock.default_mclk)
mclk = rdev->clock.default_mclk;
- /* voltage, pcie lanes, etc.*/
- radeon_pm_misc(rdev);
+ /* upvolt before raising clocks, downvolt after lowering clocks */
+ if (sclk < rdev->pm.current_sclk)
+ misc_after = true;
+
+ radeon_sync_with_vblank(rdev);
if (rdev->pm.pm_method == PM_METHOD_DYNPM) {
- radeon_sync_with_vblank(rdev);
-
if (!radeon_pm_in_vbl(rdev))
return;
-
- radeon_pm_prepare(rdev);
- /* set engine clock */
- if (sclk != rdev->pm.current_sclk) {
- radeon_pm_debug_check_in_vbl(rdev, false);
- radeon_set_engine_clock(rdev, sclk);
- radeon_pm_debug_check_in_vbl(rdev, true);
- rdev->pm.current_sclk = sclk;
- DRM_DEBUG("Setting: e: %d\n", sclk);
- }
-
- /* set memory clock */
- if (rdev->asic->set_memory_clock && (mclk != rdev->pm.current_mclk)) {
- radeon_pm_debug_check_in_vbl(rdev, false);
- radeon_set_memory_clock(rdev, mclk);
- radeon_pm_debug_check_in_vbl(rdev, true);
- rdev->pm.current_mclk = mclk;
- DRM_DEBUG("Setting: m: %d\n", mclk);
- }
- radeon_pm_finish(rdev);
- } else {
- /* set engine clock */
- if (sclk != rdev->pm.current_sclk) {
- radeon_sync_with_vblank(rdev);
- radeon_pm_prepare(rdev);
- radeon_set_engine_clock(rdev, sclk);
- radeon_pm_finish(rdev);
- rdev->pm.current_sclk = sclk;
- DRM_DEBUG("Setting: e: %d\n", sclk);
- }
- /* set memory clock */
- if (rdev->asic->set_memory_clock && (mclk != rdev->pm.current_mclk)) {
- radeon_sync_with_vblank(rdev);
- radeon_pm_prepare(rdev);
- radeon_set_memory_clock(rdev, mclk);
- radeon_pm_finish(rdev);
- rdev->pm.current_mclk = mclk;
- DRM_DEBUG("Setting: m: %d\n", mclk);
- }
}
+ radeon_pm_prepare(rdev);
+
+ if (!misc_after)
+ /* voltage, pcie lanes, etc.*/
+ radeon_pm_misc(rdev);
+
+ /* set engine clock */
+ if (sclk != rdev->pm.current_sclk) {
+ radeon_pm_debug_check_in_vbl(rdev, false);
+ radeon_set_engine_clock(rdev, sclk);
+ radeon_pm_debug_check_in_vbl(rdev, true);
+ rdev->pm.current_sclk = sclk;
+ DRM_DEBUG("Setting: e: %d\n", sclk);
+ }
+
+ /* set memory clock */
+ if (rdev->asic->set_memory_clock && (mclk != rdev->pm.current_mclk)) {
+ radeon_pm_debug_check_in_vbl(rdev, false);
+ radeon_set_memory_clock(rdev, mclk);
+ radeon_pm_debug_check_in_vbl(rdev, true);
+ rdev->pm.current_mclk = mclk;
+ DRM_DEBUG("Setting: m: %d\n", mclk);
+ }
+
+ if (misc_after)
+ /* voltage, pcie lanes, etc.*/
+ radeon_pm_misc(rdev);
+
+ radeon_pm_finish(rdev);
+
rdev->pm.current_power_state_index = rdev->pm.requested_power_state_index;
rdev->pm.current_clock_mode_index = rdev->pm.requested_clock_mode_index;
} else
@@ -288,6 +286,42 @@
mutex_unlock(&rdev->ddev->struct_mutex);
}
+static void radeon_pm_print_states(struct radeon_device *rdev)
+{
+ int i, j;
+ struct radeon_power_state *power_state;
+ struct radeon_pm_clock_info *clock_info;
+
+ DRM_DEBUG("%d Power State(s)\n", rdev->pm.num_power_states);
+ for (i = 0; i < rdev->pm.num_power_states; i++) {
+ power_state = &rdev->pm.power_state[i];
+ DRM_DEBUG("State %d: %s\n", i,
+ radeon_pm_state_type_name[power_state->type]);
+ if (i == rdev->pm.default_power_state_index)
+ DRM_DEBUG("\tDefault");
+ if ((rdev->flags & RADEON_IS_PCIE) && !(rdev->flags & RADEON_IS_IGP))
+ DRM_DEBUG("\t%d PCIE Lanes\n", power_state->pcie_lanes);
+ if (power_state->flags & RADEON_PM_STATE_SINGLE_DISPLAY_ONLY)
+ DRM_DEBUG("\tSingle display only\n");
+ DRM_DEBUG("\t%d Clock Mode(s)\n", power_state->num_clock_modes);
+ for (j = 0; j < power_state->num_clock_modes; j++) {
+ clock_info = &(power_state->clock_info[j]);
+ if (rdev->flags & RADEON_IS_IGP)
+ DRM_DEBUG("\t\t%d e: %d%s\n",
+ j,
+ clock_info->sclk * 10,
+ clock_info->flags & RADEON_PM_MODE_NO_DISPLAY ? "\tNo display only" : "");
+ else
+ DRM_DEBUG("\t\t%d e: %d\tm: %d\tv: %d%s\n",
+ j,
+ clock_info->sclk * 10,
+ clock_info->mclk * 10,
+ clock_info->voltage.voltage,
+ clock_info->flags & RADEON_PM_MODE_NO_DISPLAY ? "\tNo display only" : "");
+ }
+ }
+}
+
static ssize_t radeon_get_pm_profile(struct device *dev,
struct device_attribute *attr,
char *buf)
@@ -318,6 +352,8 @@
rdev->pm.profile = PM_PROFILE_AUTO;
else if (strncmp("low", buf, strlen("low")) == 0)
rdev->pm.profile = PM_PROFILE_LOW;
+ else if (strncmp("mid", buf, strlen("mid")) == 0)
+ rdev->pm.profile = PM_PROFILE_MID;
else if (strncmp("high", buf, strlen("high")) == 0)
rdev->pm.profile = PM_PROFILE_HIGH;
else {
@@ -361,13 +397,20 @@
rdev->pm.dynpm_planned_action = DYNPM_ACTION_DEFAULT;
mutex_unlock(&rdev->pm.mutex);
} else if (strncmp("profile", buf, strlen("profile")) == 0) {
+ bool flush_wq = false;
+
mutex_lock(&rdev->pm.mutex);
- rdev->pm.pm_method = PM_METHOD_PROFILE;
+ if (rdev->pm.pm_method == PM_METHOD_DYNPM) {
+ cancel_delayed_work(&rdev->pm.dynpm_idle_work);
+ flush_wq = true;
+ }
/* disable dynpm */
rdev->pm.dynpm_state = DYNPM_STATE_DISABLED;
rdev->pm.dynpm_planned_action = DYNPM_ACTION_NONE;
- cancel_delayed_work(&rdev->pm.dynpm_idle_work);
+ rdev->pm.pm_method = PM_METHOD_PROFILE;
mutex_unlock(&rdev->pm.mutex);
+ if (flush_wq)
+ flush_workqueue(rdev->wq);
} else {
DRM_ERROR("invalid power method!\n");
goto fail;
@@ -382,17 +425,36 @@
void radeon_pm_suspend(struct radeon_device *rdev)
{
+ bool flush_wq = false;
+
mutex_lock(&rdev->pm.mutex);
- cancel_delayed_work(&rdev->pm.dynpm_idle_work);
- rdev->pm.current_power_state_index = -1;
- rdev->pm.current_clock_mode_index = -1;
- rdev->pm.current_sclk = 0;
- rdev->pm.current_mclk = 0;
+ if (rdev->pm.pm_method == PM_METHOD_DYNPM) {
+ cancel_delayed_work(&rdev->pm.dynpm_idle_work);
+ if (rdev->pm.dynpm_state == DYNPM_STATE_ACTIVE)
+ rdev->pm.dynpm_state = DYNPM_STATE_SUSPENDED;
+ flush_wq = true;
+ }
mutex_unlock(&rdev->pm.mutex);
+ if (flush_wq)
+ flush_workqueue(rdev->wq);
}
void radeon_pm_resume(struct radeon_device *rdev)
{
+ /* asic init will reset the default power state */
+ mutex_lock(&rdev->pm.mutex);
+ rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
+ rdev->pm.current_clock_mode_index = 0;
+ rdev->pm.current_sclk = rdev->clock.default_sclk;
+ rdev->pm.current_mclk = rdev->clock.default_mclk;
+ rdev->pm.current_vddc = rdev->pm.power_state[rdev->pm.default_power_state_index].clock_info[0].voltage.voltage;
+ if (rdev->pm.pm_method == PM_METHOD_DYNPM
+ && rdev->pm.dynpm_state == DYNPM_STATE_SUSPENDED) {
+ rdev->pm.dynpm_state = DYNPM_STATE_ACTIVE;
+ queue_delayed_work(rdev->wq, &rdev->pm.dynpm_idle_work,
+ msecs_to_jiffies(RADEON_IDLE_LOOP_MS));
+ }
+ mutex_unlock(&rdev->pm.mutex);
radeon_pm_compute_clocks(rdev);
}
@@ -401,32 +463,24 @@
int ret;
/* default to profile method */
rdev->pm.pm_method = PM_METHOD_PROFILE;
+ rdev->pm.profile = PM_PROFILE_DEFAULT;
rdev->pm.dynpm_state = DYNPM_STATE_DISABLED;
rdev->pm.dynpm_planned_action = DYNPM_ACTION_NONE;
rdev->pm.dynpm_can_upclock = true;
rdev->pm.dynpm_can_downclock = true;
- rdev->pm.current_sclk = 0;
- rdev->pm.current_mclk = 0;
+ rdev->pm.current_sclk = rdev->clock.default_sclk;
+ rdev->pm.current_mclk = rdev->clock.default_mclk;
if (rdev->bios) {
if (rdev->is_atom_bios)
radeon_atombios_get_power_modes(rdev);
else
radeon_combios_get_power_modes(rdev);
+ radeon_pm_print_states(rdev);
radeon_pm_init_profile(rdev);
- rdev->pm.current_power_state_index = -1;
- rdev->pm.current_clock_mode_index = -1;
}
if (rdev->pm.num_power_states > 1) {
- if (rdev->pm.pm_method == PM_METHOD_PROFILE) {
- mutex_lock(&rdev->pm.mutex);
- rdev->pm.profile = PM_PROFILE_DEFAULT;
- radeon_pm_update_profile(rdev);
- radeon_pm_set_clocks(rdev);
- mutex_unlock(&rdev->pm.mutex);
- }
-
/* where's the best place to put these? */
ret = device_create_file(rdev->dev, &dev_attr_power_profile);
if (ret)
@@ -454,6 +508,8 @@
void radeon_pm_fini(struct radeon_device *rdev)
{
if (rdev->pm.num_power_states > 1) {
+ bool flush_wq = false;
+
mutex_lock(&rdev->pm.mutex);
if (rdev->pm.pm_method == PM_METHOD_PROFILE) {
rdev->pm.profile = PM_PROFILE_DEFAULT;
@@ -461,13 +517,16 @@
radeon_pm_set_clocks(rdev);
} else if (rdev->pm.pm_method == PM_METHOD_DYNPM) {
/* cancel work */
- cancel_delayed_work_sync(&rdev->pm.dynpm_idle_work);
+ cancel_delayed_work(&rdev->pm.dynpm_idle_work);
+ flush_wq = true;
/* reset default clocks */
rdev->pm.dynpm_state = DYNPM_STATE_DISABLED;
rdev->pm.dynpm_planned_action = DYNPM_ACTION_DEFAULT;
radeon_pm_set_clocks(rdev);
}
mutex_unlock(&rdev->pm.mutex);
+ if (flush_wq)
+ flush_workqueue(rdev->wq);
device_remove_file(rdev->dev, &dev_attr_power_profile);
device_remove_file(rdev->dev, &dev_attr_power_method);
@@ -688,12 +747,12 @@
radeon_pm_get_dynpm_state(rdev);
radeon_pm_set_clocks(rdev);
}
+
+ queue_delayed_work(rdev->wq, &rdev->pm.dynpm_idle_work,
+ msecs_to_jiffies(RADEON_IDLE_LOOP_MS));
}
mutex_unlock(&rdev->pm.mutex);
ttm_bo_unlock_delayed_workqueue(&rdev->mman.bdev, resched);
-
- queue_delayed_work(rdev->wq, &rdev->pm.dynpm_idle_work,
- msecs_to_jiffies(RADEON_IDLE_LOOP_MS));
}
/*
@@ -712,6 +771,8 @@
seq_printf(m, "default memory clock: %u0 kHz\n", rdev->clock.default_mclk);
if (rdev->asic->get_memory_clock)
seq_printf(m, "current memory clock: %u0 kHz\n", radeon_get_memory_clock(rdev));
+ if (rdev->pm.current_vddc)
+ seq_printf(m, "voltage: %u mV\n", rdev->pm.current_vddc);
if (rdev->asic->get_pcie_lanes)
seq_printf(m, "PCIE lanes: %d\n", radeon_get_pcie_lanes(rdev));
diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c
index cc5316d..b3ba44c0 100644
--- a/drivers/gpu/drm/radeon/radeon_state.c
+++ b/drivers/gpu/drm/radeon/radeon_state.c
@@ -900,9 +900,10 @@
flags |= RADEON_FRONT;
}
if (flags & (RADEON_DEPTH|RADEON_STENCIL)) {
- if (!dev_priv->have_z_offset)
+ if (!dev_priv->have_z_offset) {
printk_once(KERN_ERR "radeon: illegal depth clear request. Buggy mesa detected - please update.\n");
- flags &= ~(RADEON_DEPTH | RADEON_STENCIL);
+ flags &= ~(RADEON_DEPTH | RADEON_STENCIL);
+ }
}
if (flags & (RADEON_FRONT | RADEON_BACK)) {
diff --git a/drivers/gpu/drm/radeon/reg_srcs/evergreen b/drivers/gpu/drm/radeon/reg_srcs/evergreen
new file mode 100644
index 0000000..f78fd59
--- /dev/null
+++ b/drivers/gpu/drm/radeon/reg_srcs/evergreen
@@ -0,0 +1,611 @@
+evergreen 0x9400
+0x00008040 WAIT_UNTIL
+0x00008044 WAIT_UNTIL_POLL_CNTL
+0x00008048 WAIT_UNTIL_POLL_MASK
+0x0000804c WAIT_UNTIL_POLL_REFDATA
+0x000088B0 VGT_VTX_VECT_EJECT_REG
+0x000088C4 VGT_CACHE_INVALIDATION
+0x000088D4 VGT_GS_VERTEX_REUSE
+0x00008958 VGT_PRIMITIVE_TYPE
+0x0000895C VGT_INDEX_TYPE
+0x00008970 VGT_NUM_INDICES
+0x00008974 VGT_NUM_INSTANCES
+0x00008990 VGT_COMPUTE_DIM_X
+0x00008994 VGT_COMPUTE_DIM_Y
+0x00008998 VGT_COMPUTE_DIM_Z
+0x0000899C VGT_COMPUTE_START_X
+0x000089A0 VGT_COMPUTE_START_Y
+0x000089A4 VGT_COMPUTE_START_Z
+0x000089AC VGT_COMPUTE_THREAD_GOURP_SIZE
+0x00008A14 PA_CL_ENHANCE
+0x00008A60 PA_SC_LINE_STIPPLE_VALUE
+0x00008B10 PA_SC_LINE_STIPPLE_STATE
+0x00008BF0 PA_SC_ENHANCE
+0x00008D8C SQ_DYN_GPR_CNTL_PS_FLUSH_REQ
+0x00008C00 SQ_CONFIG
+0x00008C04 SQ_GPR_RESOURCE_MGMT_1
+0x00008C08 SQ_GPR_RESOURCE_MGMT_2
+0x00008C0C SQ_GPR_RESOURCE_MGMT_3
+0x00008C10 SQ_GLOBAL_GPR_RESOURCE_MGMT_1
+0x00008C14 SQ_GLOBAL_GPR_RESOURCE_MGMT_2
+0x00008C18 SQ_THREAD_RESOURCE_MGMT
+0x00008C1C SQ_THREAD_RESOURCE_MGMT_2
+0x00008C20 SQ_STACK_RESOURCE_MGMT_1
+0x00008C24 SQ_STACK_RESOURCE_MGMT_2
+0x00008C28 SQ_STACK_RESOURCE_MGMT_3
+0x00008DF8 SQ_CONST_MEM_BASE
+0x00008E48 SQ_EX_ALLOC_TABLE_SLOTS
+0x00009100 SPI_CONFIG_CNTL
+0x0000913C SPI_CONFIG_CNTL_1
+0x00009700 VC_CNTL
+0x00009714 VC_ENHANCE
+0x00009830 DB_DEBUG
+0x00009834 DB_DEBUG2
+0x00009838 DB_DEBUG3
+0x0000983C DB_DEBUG4
+0x00009854 DB_WATERMARKS
+0x0000A400 TD_PS_BORDER_COLOR_INDEX
+0x0000A404 TD_PS_BORDER_COLOR_RED
+0x0000A408 TD_PS_BORDER_COLOR_GREEN
+0x0000A40C TD_PS_BORDER_COLOR_BLUE
+0x0000A410 TD_PS_BORDER_COLOR_ALPHA
+0x0000A414 TD_VS_BORDER_COLOR_INDEX
+0x0000A418 TD_VS_BORDER_COLOR_RED
+0x0000A41C TD_VS_BORDER_COLOR_GREEN
+0x0000A420 TD_VS_BORDER_COLOR_BLUE
+0x0000A424 TD_VS_BORDER_COLOR_ALPHA
+0x0000A428 TD_GS_BORDER_COLOR_INDEX
+0x0000A42C TD_GS_BORDER_COLOR_RED
+0x0000A430 TD_GS_BORDER_COLOR_GREEN
+0x0000A434 TD_GS_BORDER_COLOR_BLUE
+0x0000A438 TD_GS_BORDER_COLOR_ALPHA
+0x0000A43C TD_HS_BORDER_COLOR_INDEX
+0x0000A440 TD_HS_BORDER_COLOR_RED
+0x0000A444 TD_HS_BORDER_COLOR_GREEN
+0x0000A448 TD_HS_BORDER_COLOR_BLUE
+0x0000A44C TD_HS_BORDER_COLOR_ALPHA
+0x0000A450 TD_LS_BORDER_COLOR_INDEX
+0x0000A454 TD_LS_BORDER_COLOR_RED
+0x0000A458 TD_LS_BORDER_COLOR_GREEN
+0x0000A45C TD_LS_BORDER_COLOR_BLUE
+0x0000A460 TD_LS_BORDER_COLOR_ALPHA
+0x0000A464 TD_CS_BORDER_COLOR_INDEX
+0x0000A468 TD_CS_BORDER_COLOR_RED
+0x0000A46C TD_CS_BORDER_COLOR_GREEN
+0x0000A470 TD_CS_BORDER_COLOR_BLUE
+0x0000A474 TD_CS_BORDER_COLOR_ALPHA
+0x00028000 DB_RENDER_CONTROL
+0x00028004 DB_COUNT_CONTROL
+0x0002800C DB_RENDER_OVERRIDE
+0x00028010 DB_RENDER_OVERRIDE2
+0x00028028 DB_STENCIL_CLEAR
+0x0002802C DB_DEPTH_CLEAR
+0x00028030 PA_SC_SCREEN_SCISSOR_TL
+0x00028034 PA_SC_SCREEN_SCISSOR_BR
+0x0002805C DB_DEPTH_SLICE
+0x00028140 SQ_ALU_CONST_BUFFER_SIZE_PS_0
+0x00028144 SQ_ALU_CONST_BUFFER_SIZE_PS_1
+0x00028148 SQ_ALU_CONST_BUFFER_SIZE_PS_2
+0x0002814C SQ_ALU_CONST_BUFFER_SIZE_PS_3
+0x00028150 SQ_ALU_CONST_BUFFER_SIZE_PS_4
+0x00028154 SQ_ALU_CONST_BUFFER_SIZE_PS_5
+0x00028158 SQ_ALU_CONST_BUFFER_SIZE_PS_6
+0x0002815C SQ_ALU_CONST_BUFFER_SIZE_PS_7
+0x00028160 SQ_ALU_CONST_BUFFER_SIZE_PS_8
+0x00028164 SQ_ALU_CONST_BUFFER_SIZE_PS_9
+0x00028168 SQ_ALU_CONST_BUFFER_SIZE_PS_10
+0x0002816C SQ_ALU_CONST_BUFFER_SIZE_PS_11
+0x00028170 SQ_ALU_CONST_BUFFER_SIZE_PS_12
+0x00028174 SQ_ALU_CONST_BUFFER_SIZE_PS_13
+0x00028178 SQ_ALU_CONST_BUFFER_SIZE_PS_14
+0x0002817C SQ_ALU_CONST_BUFFER_SIZE_PS_15
+0x00028180 SQ_ALU_CONST_BUFFER_SIZE_VS_0
+0x00028184 SQ_ALU_CONST_BUFFER_SIZE_VS_1
+0x00028188 SQ_ALU_CONST_BUFFER_SIZE_VS_2
+0x0002818C SQ_ALU_CONST_BUFFER_SIZE_VS_3
+0x00028190 SQ_ALU_CONST_BUFFER_SIZE_VS_4
+0x00028194 SQ_ALU_CONST_BUFFER_SIZE_VS_5
+0x00028198 SQ_ALU_CONST_BUFFER_SIZE_VS_6
+0x0002819C SQ_ALU_CONST_BUFFER_SIZE_VS_7
+0x000281A0 SQ_ALU_CONST_BUFFER_SIZE_VS_8
+0x000281A4 SQ_ALU_CONST_BUFFER_SIZE_VS_9
+0x000281A8 SQ_ALU_CONST_BUFFER_SIZE_VS_10
+0x000281AC SQ_ALU_CONST_BUFFER_SIZE_VS_11
+0x000281B0 SQ_ALU_CONST_BUFFER_SIZE_VS_12
+0x000281B4 SQ_ALU_CONST_BUFFER_SIZE_VS_13
+0x000281B8 SQ_ALU_CONST_BUFFER_SIZE_VS_14
+0x000281BC SQ_ALU_CONST_BUFFER_SIZE_VS_15
+0x000281C0 SQ_ALU_CONST_BUFFER_SIZE_GS_0
+0x000281C4 SQ_ALU_CONST_BUFFER_SIZE_GS_1
+0x000281C8 SQ_ALU_CONST_BUFFER_SIZE_GS_2
+0x000281CC SQ_ALU_CONST_BUFFER_SIZE_GS_3
+0x000281D0 SQ_ALU_CONST_BUFFER_SIZE_GS_4
+0x000281D4 SQ_ALU_CONST_BUFFER_SIZE_GS_5
+0x000281D8 SQ_ALU_CONST_BUFFER_SIZE_GS_6
+0x000281DC SQ_ALU_CONST_BUFFER_SIZE_GS_7
+0x000281E0 SQ_ALU_CONST_BUFFER_SIZE_GS_8
+0x000281E4 SQ_ALU_CONST_BUFFER_SIZE_GS_9
+0x000281E8 SQ_ALU_CONST_BUFFER_SIZE_GS_10
+0x000281EC SQ_ALU_CONST_BUFFER_SIZE_GS_11
+0x000281F0 SQ_ALU_CONST_BUFFER_SIZE_GS_12
+0x000281F4 SQ_ALU_CONST_BUFFER_SIZE_GS_13
+0x000281F8 SQ_ALU_CONST_BUFFER_SIZE_GS_14
+0x000281FC SQ_ALU_CONST_BUFFER_SIZE_GS_15
+0x00028200 PA_SC_WINDOW_OFFSET
+0x00028204 PA_SC_WINDOW_SCISSOR_TL
+0x00028208 PA_SC_WINDOW_SCISSOR_BR
+0x0002820C PA_SC_CLIPRECT_RULE
+0x00028210 PA_SC_CLIPRECT_0_TL
+0x00028214 PA_SC_CLIPRECT_0_BR
+0x00028218 PA_SC_CLIPRECT_1_TL
+0x0002821C PA_SC_CLIPRECT_1_BR
+0x00028220 PA_SC_CLIPRECT_2_TL
+0x00028224 PA_SC_CLIPRECT_2_BR
+0x00028228 PA_SC_CLIPRECT_3_TL
+0x0002822C PA_SC_CLIPRECT_3_BR
+0x00028230 PA_SC_EDGERULE
+0x00028234 PA_SU_HARDWARE_SCREEN_OFFSET
+0x00028240 PA_SC_GENERIC_SCISSOR_TL
+0x00028244 PA_SC_GENERIC_SCISSOR_BR
+0x00028250 PA_SC_VPORT_SCISSOR_0_TL
+0x00028254 PA_SC_VPORT_SCISSOR_0_BR
+0x00028258 PA_SC_VPORT_SCISSOR_1_TL
+0x0002825C PA_SC_VPORT_SCISSOR_1_BR
+0x00028260 PA_SC_VPORT_SCISSOR_2_TL
+0x00028264 PA_SC_VPORT_SCISSOR_2_BR
+0x00028268 PA_SC_VPORT_SCISSOR_3_TL
+0x0002826C PA_SC_VPORT_SCISSOR_3_BR
+0x00028270 PA_SC_VPORT_SCISSOR_4_TL
+0x00028274 PA_SC_VPORT_SCISSOR_4_BR
+0x00028278 PA_SC_VPORT_SCISSOR_5_TL
+0x0002827C PA_SC_VPORT_SCISSOR_5_BR
+0x00028280 PA_SC_VPORT_SCISSOR_6_TL
+0x00028284 PA_SC_VPORT_SCISSOR_6_BR
+0x00028288 PA_SC_VPORT_SCISSOR_7_TL
+0x0002828C PA_SC_VPORT_SCISSOR_7_BR
+0x00028290 PA_SC_VPORT_SCISSOR_8_TL
+0x00028294 PA_SC_VPORT_SCISSOR_8_BR
+0x00028298 PA_SC_VPORT_SCISSOR_9_TL
+0x0002829C PA_SC_VPORT_SCISSOR_9_BR
+0x000282A0 PA_SC_VPORT_SCISSOR_10_TL
+0x000282A4 PA_SC_VPORT_SCISSOR_10_BR
+0x000282A8 PA_SC_VPORT_SCISSOR_11_TL
+0x000282AC PA_SC_VPORT_SCISSOR_11_BR
+0x000282B0 PA_SC_VPORT_SCISSOR_12_TL
+0x000282B4 PA_SC_VPORT_SCISSOR_12_BR
+0x000282B8 PA_SC_VPORT_SCISSOR_13_TL
+0x000282BC PA_SC_VPORT_SCISSOR_13_BR
+0x000282C0 PA_SC_VPORT_SCISSOR_14_TL
+0x000282C4 PA_SC_VPORT_SCISSOR_14_BR
+0x000282C8 PA_SC_VPORT_SCISSOR_15_TL
+0x000282CC PA_SC_VPORT_SCISSOR_15_BR
+0x000282D0 PA_SC_VPORT_ZMIN_0
+0x000282D4 PA_SC_VPORT_ZMAX_0
+0x000282D8 PA_SC_VPORT_ZMIN_1
+0x000282DC PA_SC_VPORT_ZMAX_1
+0x000282E0 PA_SC_VPORT_ZMIN_2
+0x000282E4 PA_SC_VPORT_ZMAX_2
+0x000282E8 PA_SC_VPORT_ZMIN_3
+0x000282EC PA_SC_VPORT_ZMAX_3
+0x000282F0 PA_SC_VPORT_ZMIN_4
+0x000282F4 PA_SC_VPORT_ZMAX_4
+0x000282F8 PA_SC_VPORT_ZMIN_5
+0x000282FC PA_SC_VPORT_ZMAX_5
+0x00028300 PA_SC_VPORT_ZMIN_6
+0x00028304 PA_SC_VPORT_ZMAX_6
+0x00028308 PA_SC_VPORT_ZMIN_7
+0x0002830C PA_SC_VPORT_ZMAX_7
+0x00028310 PA_SC_VPORT_ZMIN_8
+0x00028314 PA_SC_VPORT_ZMAX_8
+0x00028318 PA_SC_VPORT_ZMIN_9
+0x0002831C PA_SC_VPORT_ZMAX_9
+0x00028320 PA_SC_VPORT_ZMIN_10
+0x00028324 PA_SC_VPORT_ZMAX_10
+0x00028328 PA_SC_VPORT_ZMIN_11
+0x0002832C PA_SC_VPORT_ZMAX_11
+0x00028330 PA_SC_VPORT_ZMIN_12
+0x00028334 PA_SC_VPORT_ZMAX_12
+0x00028338 PA_SC_VPORT_ZMIN_13
+0x0002833C PA_SC_VPORT_ZMAX_13
+0x00028340 PA_SC_VPORT_ZMIN_14
+0x00028344 PA_SC_VPORT_ZMAX_14
+0x00028348 PA_SC_VPORT_ZMIN_15
+0x0002834C PA_SC_VPORT_ZMAX_15
+0x00028350 SX_MISC
+0x00028380 SQ_VTX_SEMANTIC_0
+0x00028384 SQ_VTX_SEMANTIC_1
+0x00028388 SQ_VTX_SEMANTIC_2
+0x0002838C SQ_VTX_SEMANTIC_3
+0x00028390 SQ_VTX_SEMANTIC_4
+0x00028394 SQ_VTX_SEMANTIC_5
+0x00028398 SQ_VTX_SEMANTIC_6
+0x0002839C SQ_VTX_SEMANTIC_7
+0x000283A0 SQ_VTX_SEMANTIC_8
+0x000283A4 SQ_VTX_SEMANTIC_9
+0x000283A8 SQ_VTX_SEMANTIC_10
+0x000283AC SQ_VTX_SEMANTIC_11
+0x000283B0 SQ_VTX_SEMANTIC_12
+0x000283B4 SQ_VTX_SEMANTIC_13
+0x000283B8 SQ_VTX_SEMANTIC_14
+0x000283BC SQ_VTX_SEMANTIC_15
+0x000283C0 SQ_VTX_SEMANTIC_16
+0x000283C4 SQ_VTX_SEMANTIC_17
+0x000283C8 SQ_VTX_SEMANTIC_18
+0x000283CC SQ_VTX_SEMANTIC_19
+0x000283D0 SQ_VTX_SEMANTIC_20
+0x000283D4 SQ_VTX_SEMANTIC_21
+0x000283D8 SQ_VTX_SEMANTIC_22
+0x000283DC SQ_VTX_SEMANTIC_23
+0x000283E0 SQ_VTX_SEMANTIC_24
+0x000283E4 SQ_VTX_SEMANTIC_25
+0x000283E8 SQ_VTX_SEMANTIC_26
+0x000283EC SQ_VTX_SEMANTIC_27
+0x000283F0 SQ_VTX_SEMANTIC_28
+0x000283F4 SQ_VTX_SEMANTIC_29
+0x000283F8 SQ_VTX_SEMANTIC_30
+0x000283FC SQ_VTX_SEMANTIC_31
+0x00028400 VGT_MAX_VTX_INDX
+0x00028404 VGT_MIN_VTX_INDX
+0x00028408 VGT_INDX_OFFSET
+0x0002840C VGT_MULTI_PRIM_IB_RESET_INDX
+0x00028410 SX_ALPHA_TEST_CONTROL
+0x00028414 CB_BLEND_RED
+0x00028418 CB_BLEND_GREEN
+0x0002841C CB_BLEND_BLUE
+0x00028420 CB_BLEND_ALPHA
+0x00028430 DB_STENCILREFMASK
+0x00028434 DB_STENCILREFMASK_BF
+0x00028438 SX_ALPHA_REF
+0x0002843C PA_CL_VPORT_XSCALE_0
+0x00028440 PA_CL_VPORT_XOFFSET_0
+0x00028444 PA_CL_VPORT_YSCALE_0
+0x00028448 PA_CL_VPORT_YOFFSET_0
+0x0002844C PA_CL_VPORT_ZSCALE_0
+0x00028450 PA_CL_VPORT_ZOFFSET_0
+0x00028454 PA_CL_VPORT_XSCALE_1
+0x00028458 PA_CL_VPORT_XOFFSET_1
+0x0002845C PA_CL_VPORT_YSCALE_1
+0x00028460 PA_CL_VPORT_YOFFSET_1
+0x00028464 PA_CL_VPORT_ZSCALE_1
+0x00028468 PA_CL_VPORT_ZOFFSET_1
+0x0002846C PA_CL_VPORT_XSCALE_2
+0x00028470 PA_CL_VPORT_XOFFSET_2
+0x00028474 PA_CL_VPORT_YSCALE_2
+0x00028478 PA_CL_VPORT_YOFFSET_2
+0x0002847C PA_CL_VPORT_ZSCALE_2
+0x00028480 PA_CL_VPORT_ZOFFSET_2
+0x00028484 PA_CL_VPORT_XSCALE_3
+0x00028488 PA_CL_VPORT_XOFFSET_3
+0x0002848C PA_CL_VPORT_YSCALE_3
+0x00028490 PA_CL_VPORT_YOFFSET_3
+0x00028494 PA_CL_VPORT_ZSCALE_3
+0x00028498 PA_CL_VPORT_ZOFFSET_3
+0x0002849C PA_CL_VPORT_XSCALE_4
+0x000284A0 PA_CL_VPORT_XOFFSET_4
+0x000284A4 PA_CL_VPORT_YSCALE_4
+0x000284A8 PA_CL_VPORT_YOFFSET_4
+0x000284AC PA_CL_VPORT_ZSCALE_4
+0x000284B0 PA_CL_VPORT_ZOFFSET_4
+0x000284B4 PA_CL_VPORT_XSCALE_5
+0x000284B8 PA_CL_VPORT_XOFFSET_5
+0x000284BC PA_CL_VPORT_YSCALE_5
+0x000284C0 PA_CL_VPORT_YOFFSET_5
+0x000284C4 PA_CL_VPORT_ZSCALE_5
+0x000284C8 PA_CL_VPORT_ZOFFSET_5
+0x000284CC PA_CL_VPORT_XSCALE_6
+0x000284D0 PA_CL_VPORT_XOFFSET_6
+0x000284D4 PA_CL_VPORT_YSCALE_6
+0x000284D8 PA_CL_VPORT_YOFFSET_6
+0x000284DC PA_CL_VPORT_ZSCALE_6
+0x000284E0 PA_CL_VPORT_ZOFFSET_6
+0x000284E4 PA_CL_VPORT_XSCALE_7
+0x000284E8 PA_CL_VPORT_XOFFSET_7
+0x000284EC PA_CL_VPORT_YSCALE_7
+0x000284F0 PA_CL_VPORT_YOFFSET_7
+0x000284F4 PA_CL_VPORT_ZSCALE_7
+0x000284F8 PA_CL_VPORT_ZOFFSET_7
+0x000284FC PA_CL_VPORT_XSCALE_8
+0x00028500 PA_CL_VPORT_XOFFSET_8
+0x00028504 PA_CL_VPORT_YSCALE_8
+0x00028508 PA_CL_VPORT_YOFFSET_8
+0x0002850C PA_CL_VPORT_ZSCALE_8
+0x00028510 PA_CL_VPORT_ZOFFSET_8
+0x00028514 PA_CL_VPORT_XSCALE_9
+0x00028518 PA_CL_VPORT_XOFFSET_9
+0x0002851C PA_CL_VPORT_YSCALE_9
+0x00028520 PA_CL_VPORT_YOFFSET_9
+0x00028524 PA_CL_VPORT_ZSCALE_9
+0x00028528 PA_CL_VPORT_ZOFFSET_9
+0x0002852C PA_CL_VPORT_XSCALE_10
+0x00028530 PA_CL_VPORT_XOFFSET_10
+0x00028534 PA_CL_VPORT_YSCALE_10
+0x00028538 PA_CL_VPORT_YOFFSET_10
+0x0002853C PA_CL_VPORT_ZSCALE_10
+0x00028540 PA_CL_VPORT_ZOFFSET_10
+0x00028544 PA_CL_VPORT_XSCALE_11
+0x00028548 PA_CL_VPORT_XOFFSET_11
+0x0002854C PA_CL_VPORT_YSCALE_11
+0x00028550 PA_CL_VPORT_YOFFSET_11
+0x00028554 PA_CL_VPORT_ZSCALE_11
+0x00028558 PA_CL_VPORT_ZOFFSET_11
+0x0002855C PA_CL_VPORT_XSCALE_12
+0x00028560 PA_CL_VPORT_XOFFSET_12
+0x00028564 PA_CL_VPORT_YSCALE_12
+0x00028568 PA_CL_VPORT_YOFFSET_12
+0x0002856C PA_CL_VPORT_ZSCALE_12
+0x00028570 PA_CL_VPORT_ZOFFSET_12
+0x00028574 PA_CL_VPORT_XSCALE_13
+0x00028578 PA_CL_VPORT_XOFFSET_13
+0x0002857C PA_CL_VPORT_YSCALE_13
+0x00028580 PA_CL_VPORT_YOFFSET_13
+0x00028584 PA_CL_VPORT_ZSCALE_13
+0x00028588 PA_CL_VPORT_ZOFFSET_13
+0x0002858C PA_CL_VPORT_XSCALE_14
+0x00028590 PA_CL_VPORT_XOFFSET_14
+0x00028594 PA_CL_VPORT_YSCALE_14
+0x00028598 PA_CL_VPORT_YOFFSET_14
+0x0002859C PA_CL_VPORT_ZSCALE_14
+0x000285A0 PA_CL_VPORT_ZOFFSET_14
+0x000285A4 PA_CL_VPORT_XSCALE_15
+0x000285A8 PA_CL_VPORT_XOFFSET_15
+0x000285AC PA_CL_VPORT_YSCALE_15
+0x000285B0 PA_CL_VPORT_YOFFSET_15
+0x000285B4 PA_CL_VPORT_ZSCALE_15
+0x000285B8 PA_CL_VPORT_ZOFFSET_15
+0x000285BC PA_CL_UCP_0_X
+0x000285C0 PA_CL_UCP_0_Y
+0x000285C4 PA_CL_UCP_0_Z
+0x000285C8 PA_CL_UCP_0_W
+0x000285CC PA_CL_UCP_1_X
+0x000285D0 PA_CL_UCP_1_Y
+0x000285D4 PA_CL_UCP_1_Z
+0x000285D8 PA_CL_UCP_1_W
+0x000285DC PA_CL_UCP_2_X
+0x000285E0 PA_CL_UCP_2_Y
+0x000285E4 PA_CL_UCP_2_Z
+0x000285E8 PA_CL_UCP_2_W
+0x000285EC PA_CL_UCP_3_X
+0x000285F0 PA_CL_UCP_3_Y
+0x000285F4 PA_CL_UCP_3_Z
+0x000285F8 PA_CL_UCP_3_W
+0x000285FC PA_CL_UCP_4_X
+0x00028600 PA_CL_UCP_4_Y
+0x00028604 PA_CL_UCP_4_Z
+0x00028608 PA_CL_UCP_4_W
+0x0002860C PA_CL_UCP_5_X
+0x00028610 PA_CL_UCP_5_Y
+0x00028614 PA_CL_UCP_5_Z
+0x00028618 PA_CL_UCP_5_W
+0x0002861C SPI_VS_OUT_ID_0
+0x00028620 SPI_VS_OUT_ID_1
+0x00028624 SPI_VS_OUT_ID_2
+0x00028628 SPI_VS_OUT_ID_3
+0x0002862C SPI_VS_OUT_ID_4
+0x00028630 SPI_VS_OUT_ID_5
+0x00028634 SPI_VS_OUT_ID_6
+0x00028638 SPI_VS_OUT_ID_7
+0x0002863C SPI_VS_OUT_ID_8
+0x00028640 SPI_VS_OUT_ID_9
+0x00028644 SPI_PS_INPUT_CNTL_0
+0x00028648 SPI_PS_INPUT_CNTL_1
+0x0002864C SPI_PS_INPUT_CNTL_2
+0x00028650 SPI_PS_INPUT_CNTL_3
+0x00028654 SPI_PS_INPUT_CNTL_4
+0x00028658 SPI_PS_INPUT_CNTL_5
+0x0002865C SPI_PS_INPUT_CNTL_6
+0x00028660 SPI_PS_INPUT_CNTL_7
+0x00028664 SPI_PS_INPUT_CNTL_8
+0x00028668 SPI_PS_INPUT_CNTL_9
+0x0002866C SPI_PS_INPUT_CNTL_10
+0x00028670 SPI_PS_INPUT_CNTL_11
+0x00028674 SPI_PS_INPUT_CNTL_12
+0x00028678 SPI_PS_INPUT_CNTL_13
+0x0002867C SPI_PS_INPUT_CNTL_14
+0x00028680 SPI_PS_INPUT_CNTL_15
+0x00028684 SPI_PS_INPUT_CNTL_16
+0x00028688 SPI_PS_INPUT_CNTL_17
+0x0002868C SPI_PS_INPUT_CNTL_18
+0x00028690 SPI_PS_INPUT_CNTL_19
+0x00028694 SPI_PS_INPUT_CNTL_20
+0x00028698 SPI_PS_INPUT_CNTL_21
+0x0002869C SPI_PS_INPUT_CNTL_22
+0x000286A0 SPI_PS_INPUT_CNTL_23
+0x000286A4 SPI_PS_INPUT_CNTL_24
+0x000286A8 SPI_PS_INPUT_CNTL_25
+0x000286AC SPI_PS_INPUT_CNTL_26
+0x000286B0 SPI_PS_INPUT_CNTL_27
+0x000286B4 SPI_PS_INPUT_CNTL_28
+0x000286B8 SPI_PS_INPUT_CNTL_29
+0x000286BC SPI_PS_INPUT_CNTL_30
+0x000286C0 SPI_PS_INPUT_CNTL_31
+0x000286C4 SPI_VS_OUT_CONFIG
+0x000286C8 SPI_THREAD_GROUPING
+0x000286CC SPI_PS_IN_CONTROL_0
+0x000286D0 SPI_PS_IN_CONTROL_1
+0x000286D4 SPI_INTERP_CONTROL_0
+0x000286D8 SPI_INPUT_Z
+0x000286DC SPI_FOG_CNTL
+0x000286E0 SPI_BARYC_CNTL
+0x000286E4 SPI_PS_IN_CONTROL_2
+0x000286E8 SPI_COMPUTE_INPUT_CNTL
+0x000286EC SPI_COMPUTE_NUM_THREAD_X
+0x000286F0 SPI_COMPUTE_NUM_THREAD_Y
+0x000286F4 SPI_COMPUTE_NUM_THREAD_Z
+0x000286F8 GDS_ADDR_SIZE
+0x00028780 CB_BLEND0_CONTROL
+0x00028784 CB_BLEND1_CONTROL
+0x00028788 CB_BLEND2_CONTROL
+0x0002878C CB_BLEND3_CONTROL
+0x00028790 CB_BLEND4_CONTROL
+0x00028794 CB_BLEND5_CONTROL
+0x00028798 CB_BLEND6_CONTROL
+0x0002879C CB_BLEND7_CONTROL
+0x000287CC CS_COPY_STATE
+0x000287D0 GFX_COPY_STATE
+0x000287D4 PA_CL_POINT_X_RAD
+0x000287D8 PA_CL_POINT_Y_RAD
+0x000287DC PA_CL_POINT_SIZE
+0x000287E0 PA_CL_POINT_CULL_RAD
+0x00028808 CB_COLOR_CONTROL
+0x0002880C DB_SHADER_CONTROL
+0x00028810 PA_CL_CLIP_CNTL
+0x00028814 PA_SU_SC_MODE_CNTL
+0x00028818 PA_CL_VTE_CNTL
+0x0002881C PA_CL_VS_OUT_CNTL
+0x00028820 PA_CL_NANINF_CNTL
+0x00028824 PA_SU_LINE_STIPPLE_CNTL
+0x00028828 PA_SU_LINE_STIPPLE_SCALE
+0x0002882C PA_SU_PRIM_FILTER_CNTL
+0x00028838 SQ_DYN_GPR_RESOURCE_LIMIT_1
+0x00028844 SQ_PGM_RESOURCES_PS
+0x00028848 SQ_PGM_RESOURCES_2_PS
+0x0002884C SQ_PGM_EXPORTS_PS
+0x00028860 SQ_PGM_RESOURCES_VS
+0x00028864 SQ_PGM_RESOURCES_2_VS
+0x00028878 SQ_PGM_RESOURCES_GS
+0x0002887C SQ_PGM_RESOURCES_2_GS
+0x00028890 SQ_PGM_RESOURCES_ES
+0x00028894 SQ_PGM_RESOURCES_2_ES
+0x000288A8 SQ_PGM_RESOURCES_FS
+0x000288BC SQ_PGM_RESOURCES_HS
+0x000288C0 SQ_PGM_RESOURCES_2_HS
+0x000288D4 SQ_PGM_RESOURCES_LS
+0x000288D8 SQ_PGM_RESOURCES_2_LS
+0x000288E8 SQ_LDS_ALLOC
+0x000288EC SQ_LDS_ALLOC_PS
+0x000288F0 SQ_VTX_SEMANTIC_CLEAR
+0x00028A00 PA_SU_POINT_SIZE
+0x00028A04 PA_SU_POINT_MINMAX
+0x00028A08 PA_SU_LINE_CNTL
+0x00028A0C PA_SC_LINE_STIPPLE
+0x00028A10 VGT_OUTPUT_PATH_CNTL
+0x00028A14 VGT_HOS_CNTL
+0x00028A18 VGT_HOS_MAX_TESS_LEVEL
+0x00028A1C VGT_HOS_MIN_TESS_LEVEL
+0x00028A20 VGT_HOS_REUSE_DEPTH
+0x00028A24 VGT_GROUP_PRIM_TYPE
+0x00028A28 VGT_GROUP_FIRST_DECR
+0x00028A2C VGT_GROUP_DECR
+0x00028A30 VGT_GROUP_VECT_0_CNTL
+0x00028A34 VGT_GROUP_VECT_1_CNTL
+0x00028A38 VGT_GROUP_VECT_0_FMT_CNTL
+0x00028A3C VGT_GROUP_VECT_1_FMT_CNTL
+0x00028A40 VGT_GS_MODE
+0x00028A48 PA_SC_MODE_CNTL_0
+0x00028A4C PA_SC_MODE_CNTL_1
+0x00028A50 VGT_ENHANCE
+0x00028A54 VGT_GS_PER_ES
+0x00028A58 VGT_ES_PER_GS
+0x00028A5C VGT_GS_PER_VS
+0x00028A6C VGT_GS_OUT_PRIM_TYPE
+0x00028A84 VGT_PRIMITIVEID_EN
+0x00028A94 VGT_MULTI_PRIM_IB_RESET_EN
+0x00028AA0 VGT_INSTANCE_STEP_RATE_0
+0x00028AA4 VGT_INSTANCE_STEP_RATE_1
+0x00028AB4 VGT_REUSE_OFF
+0x00028AB8 VGT_VTX_CNT_EN
+0x00028ABC DB_HTILE_SURFACE
+0x00028AC0 DB_SRESULTS_COMPARE_STATE0
+0x00028AC4 DB_SRESULTS_COMPARE_STATE1
+0x00028AC8 DB_PRELOAD_CONTROL
+0x00028B38 VGT_GS_MAX_VERT_OUT
+0x00028B54 VGT_SHADER_STAGES_EN
+0x00028B58 VGT_LS_HS_CONFIG
+0x00028B5C VGT_LS_SIZE
+0x00028B60 VGT_HS_SIZE
+0x00028B64 VGT_LS_HS_ALLOC
+0x00028B68 VGT_HS_PATCH_CONST
+0x00028B6C VGT_TF_PARAM
+0x00028B70 DB_ALPHA_TO_MASK
+0x00028B74 VGT_DISPATCH_INITIATOR
+0x00028B78 PA_SU_POLY_OFFSET_DB_FMT_CNTL
+0x00028B7C PA_SU_POLY_OFFSET_CLAMP
+0x00028B80 PA_SU_POLY_OFFSET_FRONT_SCALE
+0x00028B84 PA_SU_POLY_OFFSET_FRONT_OFFSET
+0x00028B88 PA_SU_POLY_OFFSET_BACK_SCALE
+0x00028B8C PA_SU_POLY_OFFSET_BACK_OFFSET
+0x00028B74 VGT_GS_INSTANCE_CNT
+0x00028C00 PA_SC_LINE_CNTL
+0x00028C08 PA_SU_VTX_CNTL
+0x00028C0C PA_CL_GB_VERT_CLIP_ADJ
+0x00028C10 PA_CL_GB_VERT_DISC_ADJ
+0x00028C14 PA_CL_GB_HORZ_CLIP_ADJ
+0x00028C18 PA_CL_GB_HORZ_DISC_ADJ
+0x00028C1C PA_SC_AA_SAMPLE_LOCS_0
+0x00028C20 PA_SC_AA_SAMPLE_LOCS_1
+0x00028C24 PA_SC_AA_SAMPLE_LOCS_2
+0x00028C28 PA_SC_AA_SAMPLE_LOCS_3
+0x00028C2C PA_SC_AA_SAMPLE_LOCS_4
+0x00028C30 PA_SC_AA_SAMPLE_LOCS_5
+0x00028C34 PA_SC_AA_SAMPLE_LOCS_6
+0x00028C38 PA_SC_AA_SAMPLE_LOCS_7
+0x00028C3C PA_SC_AA_MASK
+0x00028C8C CB_COLOR0_CLEAR_WORD0
+0x00028C90 CB_COLOR0_CLEAR_WORD1
+0x00028C94 CB_COLOR0_CLEAR_WORD2
+0x00028C98 CB_COLOR0_CLEAR_WORD3
+0x00028CC8 CB_COLOR1_CLEAR_WORD0
+0x00028CCC CB_COLOR1_CLEAR_WORD1
+0x00028CD0 CB_COLOR1_CLEAR_WORD2
+0x00028CD4 CB_COLOR1_CLEAR_WORD3
+0x00028D04 CB_COLOR2_CLEAR_WORD0
+0x00028D08 CB_COLOR2_CLEAR_WORD1
+0x00028D0C CB_COLOR2_CLEAR_WORD2
+0x00028D10 CB_COLOR2_CLEAR_WORD3
+0x00028D40 CB_COLOR3_CLEAR_WORD0
+0x00028D44 CB_COLOR3_CLEAR_WORD1
+0x00028D48 CB_COLOR3_CLEAR_WORD2
+0x00028D4C CB_COLOR3_CLEAR_WORD3
+0x00028D7C CB_COLOR4_CLEAR_WORD0
+0x00028D80 CB_COLOR4_CLEAR_WORD1
+0x00028D84 CB_COLOR4_CLEAR_WORD2
+0x00028D88 CB_COLOR4_CLEAR_WORD3
+0x00028DB8 CB_COLOR5_CLEAR_WORD0
+0x00028DBC CB_COLOR5_CLEAR_WORD1
+0x00028DC0 CB_COLOR5_CLEAR_WORD2
+0x00028DC4 CB_COLOR5_CLEAR_WORD3
+0x00028DF4 CB_COLOR6_CLEAR_WORD0
+0x00028DF8 CB_COLOR6_CLEAR_WORD1
+0x00028DFC CB_COLOR6_CLEAR_WORD2
+0x00028E00 CB_COLOR6_CLEAR_WORD3
+0x00028E30 CB_COLOR7_CLEAR_WORD0
+0x00028E34 CB_COLOR7_CLEAR_WORD1
+0x00028E38 CB_COLOR7_CLEAR_WORD2
+0x00028E3C CB_COLOR7_CLEAR_WORD3
+0x00028F80 SQ_ALU_CONST_BUFFER_SIZE_HS_0
+0x00028F84 SQ_ALU_CONST_BUFFER_SIZE_HS_1
+0x00028F88 SQ_ALU_CONST_BUFFER_SIZE_HS_2
+0x00028F8C SQ_ALU_CONST_BUFFER_SIZE_HS_3
+0x00028F90 SQ_ALU_CONST_BUFFER_SIZE_HS_4
+0x00028F94 SQ_ALU_CONST_BUFFER_SIZE_HS_5
+0x00028F98 SQ_ALU_CONST_BUFFER_SIZE_HS_6
+0x00028F9C SQ_ALU_CONST_BUFFER_SIZE_HS_7
+0x00028FA0 SQ_ALU_CONST_BUFFER_SIZE_HS_8
+0x00028FA4 SQ_ALU_CONST_BUFFER_SIZE_HS_9
+0x00028FA8 SQ_ALU_CONST_BUFFER_SIZE_HS_10
+0x00028FAC SQ_ALU_CONST_BUFFER_SIZE_HS_11
+0x00028FB0 SQ_ALU_CONST_BUFFER_SIZE_HS_12
+0x00028FB4 SQ_ALU_CONST_BUFFER_SIZE_HS_13
+0x00028FB8 SQ_ALU_CONST_BUFFER_SIZE_HS_14
+0x00028FBC SQ_ALU_CONST_BUFFER_SIZE_HS_15
+0x00028FC0 SQ_ALU_CONST_BUFFER_SIZE_LS_0
+0x00028FC4 SQ_ALU_CONST_BUFFER_SIZE_LS_1
+0x00028FC8 SQ_ALU_CONST_BUFFER_SIZE_LS_2
+0x00028FCC SQ_ALU_CONST_BUFFER_SIZE_LS_3
+0x00028FD0 SQ_ALU_CONST_BUFFER_SIZE_LS_4
+0x00028FD4 SQ_ALU_CONST_BUFFER_SIZE_LS_5
+0x00028FD8 SQ_ALU_CONST_BUFFER_SIZE_LS_6
+0x00028FDC SQ_ALU_CONST_BUFFER_SIZE_LS_7
+0x00028FE0 SQ_ALU_CONST_BUFFER_SIZE_LS_8
+0x00028FE4 SQ_ALU_CONST_BUFFER_SIZE_LS_9
+0x00028FE8 SQ_ALU_CONST_BUFFER_SIZE_LS_10
+0x00028FEC SQ_ALU_CONST_BUFFER_SIZE_LS_11
+0x00028FF0 SQ_ALU_CONST_BUFFER_SIZE_LS_12
+0x00028FF4 SQ_ALU_CONST_BUFFER_SIZE_LS_13
+0x00028FF8 SQ_ALU_CONST_BUFFER_SIZE_LS_14
+0x00028FFC SQ_ALU_CONST_BUFFER_SIZE_LS_15
+0x0003CFF0 SQ_VTX_BASE_VTX_LOC
+0x0003CFF4 SQ_VTX_START_INST_LOC
+0x0003FF00 SQ_TEX_SAMPLER_CLEAR
+0x0003FF04 SQ_TEX_RESOURCE_CLEAR
+0x0003FF08 SQ_LOOP_BOOL_CLEAR
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index 9e4240b..f454c9a 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -57,7 +57,9 @@
}
if (rdev->family == CHIP_RS400 || rdev->family == CHIP_RS480) {
/* FIXME: RS400 & RS480 seems to have issue with GART size
- * if 4G of system memory (needs more testing) */
+ * if 4G of system memory (needs more testing)
+ */
+ /* XXX is this still an issue with proper alignment? */
rdev->mc.gtt_size = 32 * 1024 * 1024;
DRM_ERROR("Forcing to 32M GART size (because of ASIC bug ?)\n");
}
@@ -263,6 +265,7 @@
r100_vram_init_sizes(rdev);
base = (RREG32(RADEON_NB_TOM) & 0xffff) << 16;
radeon_vram_location(rdev, &rdev->mc, base);
+ rdev->mc.gtt_base_align = rdev->mc.gtt_size - 1;
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
}
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 79887ca..6dc15ea 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -74,7 +74,8 @@
if (voltage->delay)
udelay(voltage->delay);
}
- }
+ } else if (voltage->type == VOLTAGE_VDDC)
+ radeon_atom_set_voltage(rdev, voltage->vddc_id);
dyn_pwrmgt_sclk_length = RREG32_PLL(DYN_PWRMGT_SCLK_LENGTH);
dyn_pwrmgt_sclk_length &= ~REDUCED_POWER_SCLK_HILEN(0xf);
@@ -697,6 +698,7 @@
base = G_000004_MC_FB_START(base) << 16;
rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
radeon_vram_location(rdev, &rdev->mc, base);
+ rdev->mc.gtt_base_align = 0;
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
}
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index bcc3319..ce4ecbe 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -79,7 +79,13 @@
tmp.full = dfixed_const(100);
rdev->pm.igp_sideport_mclk.full = dfixed_const(info->info.ulBootUpMemoryClock);
rdev->pm.igp_sideport_mclk.full = dfixed_div(rdev->pm.igp_sideport_mclk, tmp);
- rdev->pm.igp_system_mclk.full = dfixed_const(le16_to_cpu(info->info.usK8MemoryClock));
+ if (info->info.usK8MemoryClock)
+ rdev->pm.igp_system_mclk.full = dfixed_const(le16_to_cpu(info->info.usK8MemoryClock));
+ else if (rdev->clock.default_mclk) {
+ rdev->pm.igp_system_mclk.full = dfixed_const(rdev->clock.default_mclk);
+ rdev->pm.igp_system_mclk.full = dfixed_div(rdev->pm.igp_system_mclk, tmp);
+ } else
+ rdev->pm.igp_system_mclk.full = dfixed_const(400);
rdev->pm.igp_ht_link_clk.full = dfixed_const(le16_to_cpu(info->info.usFSBClock));
rdev->pm.igp_ht_link_width.full = dfixed_const(info->info.ucHTLinkWidth);
break;
@@ -87,34 +93,31 @@
tmp.full = dfixed_const(100);
rdev->pm.igp_sideport_mclk.full = dfixed_const(info->info_v2.ulBootUpSidePortClock);
rdev->pm.igp_sideport_mclk.full = dfixed_div(rdev->pm.igp_sideport_mclk, tmp);
- rdev->pm.igp_system_mclk.full = dfixed_const(info->info_v2.ulBootUpUMAClock);
+ if (info->info_v2.ulBootUpUMAClock)
+ rdev->pm.igp_system_mclk.full = dfixed_const(info->info_v2.ulBootUpUMAClock);
+ else if (rdev->clock.default_mclk)
+ rdev->pm.igp_system_mclk.full = dfixed_const(rdev->clock.default_mclk);
+ else
+ rdev->pm.igp_system_mclk.full = dfixed_const(66700);
rdev->pm.igp_system_mclk.full = dfixed_div(rdev->pm.igp_system_mclk, tmp);
rdev->pm.igp_ht_link_clk.full = dfixed_const(info->info_v2.ulHTLinkFreq);
rdev->pm.igp_ht_link_clk.full = dfixed_div(rdev->pm.igp_ht_link_clk, tmp);
rdev->pm.igp_ht_link_width.full = dfixed_const(le16_to_cpu(info->info_v2.usMinHTLinkWidth));
break;
default:
- tmp.full = dfixed_const(100);
/* We assume the slower possible clock ie worst case */
- /* DDR 333Mhz */
- rdev->pm.igp_sideport_mclk.full = dfixed_const(333);
- /* FIXME: system clock ? */
- rdev->pm.igp_system_mclk.full = dfixed_const(100);
- rdev->pm.igp_system_mclk.full = dfixed_div(rdev->pm.igp_system_mclk, tmp);
- rdev->pm.igp_ht_link_clk.full = dfixed_const(200);
+ rdev->pm.igp_sideport_mclk.full = dfixed_const(200);
+ rdev->pm.igp_system_mclk.full = dfixed_const(200);
+ rdev->pm.igp_ht_link_clk.full = dfixed_const(1000);
rdev->pm.igp_ht_link_width.full = dfixed_const(8);
DRM_ERROR("No integrated system info for your GPU, using safe default\n");
break;
}
} else {
- tmp.full = dfixed_const(100);
/* We assume the slower possible clock ie worst case */
- /* DDR 333Mhz */
- rdev->pm.igp_sideport_mclk.full = dfixed_const(333);
- /* FIXME: system clock ? */
- rdev->pm.igp_system_mclk.full = dfixed_const(100);
- rdev->pm.igp_system_mclk.full = dfixed_div(rdev->pm.igp_system_mclk, tmp);
- rdev->pm.igp_ht_link_clk.full = dfixed_const(200);
+ rdev->pm.igp_sideport_mclk.full = dfixed_const(200);
+ rdev->pm.igp_system_mclk.full = dfixed_const(200);
+ rdev->pm.igp_ht_link_clk.full = dfixed_const(1000);
rdev->pm.igp_ht_link_width.full = dfixed_const(8);
DRM_ERROR("No integrated system info for your GPU, using safe default\n");
}
@@ -159,6 +162,7 @@
rs690_pm_info(rdev);
rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
radeon_vram_location(rdev, &rdev->mc, base);
+ rdev->mc.gtt_base_align = rdev->mc.gtt_size - 1;
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
}
@@ -228,10 +232,6 @@
fixed20_12 a, b, c;
fixed20_12 pclk, request_fifo_depth, tolerable_latency, estimated_width;
fixed20_12 consumption_time, line_time, chunk_time, read_delay_latency;
- /* FIXME: detect IGP with sideport memory, i don't think there is any
- * such product available
- */
- bool sideport = false;
if (!crtc->base.enabled) {
/* FIXME: wouldn't it better to set priority mark to maximum */
@@ -300,7 +300,7 @@
/* Maximun bandwidth is the minimun bandwidth of all component */
rdev->pm.max_bandwidth = rdev->pm.core_bandwidth;
- if (sideport) {
+ if (rdev->mc.igp_sideport_enabled) {
if (rdev->pm.max_bandwidth.full > rdev->pm.sideport_bandwidth.full &&
rdev->pm.sideport_bandwidth.full)
rdev->pm.max_bandwidth = rdev->pm.sideport_bandwidth;
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index 7d9a7b0..0c9c169 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -195,6 +195,7 @@
rv515_vram_get_type(rdev);
r100_vram_init_sizes(rdev);
radeon_vram_location(rdev, &rdev->mc, 0);
+ rdev->mc.gtt_base_align = 0;
if (!(rdev->flags & RADEON_IS_AGP))
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index 253f24a..b7fd820 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -44,7 +44,18 @@
void rv770_pm_misc(struct radeon_device *rdev)
{
+ int req_ps_idx = rdev->pm.requested_power_state_index;
+ int req_cm_idx = rdev->pm.requested_clock_mode_index;
+ struct radeon_power_state *ps = &rdev->pm.power_state[req_ps_idx];
+ struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage;
+ if ((voltage->type == VOLTAGE_SW) && voltage->voltage) {
+ if (voltage->voltage != rdev->pm.current_vddc) {
+ radeon_atom_set_voltage(rdev, voltage->voltage);
+ rdev->pm.current_vddc = voltage->voltage;
+ DRM_DEBUG("Setting: v: %d\n", voltage->voltage);
+ }
+ }
}
/*
@@ -213,7 +224,7 @@
WREG32(MC_VM_FB_LOCATION, tmp);
WREG32(HDP_NONSURFACE_BASE, (rdev->mc.vram_start >> 8));
WREG32(HDP_NONSURFACE_INFO, (2 << 7));
- WREG32(HDP_NONSURFACE_SIZE, (rdev->mc.mc_vram_size - 1) | 0x3FF);
+ WREG32(HDP_NONSURFACE_SIZE, 0x3FFFFFFF);
if (rdev->flags & RADEON_IS_AGP) {
WREG32(MC_VM_AGP_TOP, rdev->mc.gtt_end >> 16);
WREG32(MC_VM_AGP_BOT, rdev->mc.gtt_start >> 16);
diff --git a/drivers/gpu/drm/ttm/ttm_page_alloc.c b/drivers/gpu/drm/ttm/ttm_page_alloc.c
index 0d9a42c..d233c65 100644
--- a/drivers/gpu/drm/ttm/ttm_page_alloc.c
+++ b/drivers/gpu/drm/ttm/ttm_page_alloc.c
@@ -40,7 +40,9 @@
#include <linux/slab.h>
#include <asm/atomic.h>
+#ifdef TTM_HAS_AGP
#include <asm/agp.h>
+#endif
#include "ttm/ttm_bo_driver.h"
#include "ttm/ttm_page_alloc.h"
@@ -77,7 +79,7 @@
/**
* Limits for the pool. They are handled without locks because only place where
* they may change is in sysfs store. They won't have immediate effect anyway
- * so forcing serialiazation to access them is pointless.
+ * so forcing serialization to access them is pointless.
*/
struct ttm_pool_opts {
@@ -104,7 +106,6 @@
struct ttm_pool_manager {
struct kobject kobj;
struct shrinker mm_shrink;
- atomic_t page_alloc_inited;
struct ttm_pool_opts options;
union {
@@ -142,7 +143,7 @@
{
struct ttm_pool_manager *m =
container_of(kobj, struct ttm_pool_manager, kobj);
- (void)m;
+ kfree(m);
}
static ssize_t ttm_pool_store(struct kobject *kobj,
@@ -165,16 +166,18 @@
m->options.small = val;
else if (attr == &ttm_page_pool_alloc_size) {
if (val > NUM_PAGES_TO_ALLOC*8) {
- printk(KERN_ERR "[ttm] Setting allocation size to %lu "
- "is not allowed. Recomended size is "
- "%lu\n",
- NUM_PAGES_TO_ALLOC*(PAGE_SIZE >> 7),
- NUM_PAGES_TO_ALLOC*(PAGE_SIZE >> 10));
+ printk(KERN_ERR TTM_PFX
+ "Setting allocation size to %lu "
+ "is not allowed. Recommended size is "
+ "%lu\n",
+ NUM_PAGES_TO_ALLOC*(PAGE_SIZE >> 7),
+ NUM_PAGES_TO_ALLOC*(PAGE_SIZE >> 10));
return size;
} else if (val > NUM_PAGES_TO_ALLOC) {
- printk(KERN_WARNING "[ttm] Setting allocation size to "
- "larger than %lu is not recomended.\n",
- NUM_PAGES_TO_ALLOC*(PAGE_SIZE >> 10));
+ printk(KERN_WARNING TTM_PFX
+ "Setting allocation size to "
+ "larger than %lu is not recommended.\n",
+ NUM_PAGES_TO_ALLOC*(PAGE_SIZE >> 10));
}
m->options.alloc_size = val;
}
@@ -212,9 +215,7 @@
.default_attrs = ttm_pool_attrs,
};
-static struct ttm_pool_manager _manager = {
- .page_alloc_inited = ATOMIC_INIT(0)
-};
+static struct ttm_pool_manager *_manager;
#ifndef CONFIG_X86
static int set_pages_array_wb(struct page **pages, int addrinarray)
@@ -269,7 +270,7 @@
if (flags & TTM_PAGE_FLAG_DMA32)
pool_index |= 0x2;
- return &_manager.pools[pool_index];
+ return &_manager->pools[pool_index];
}
/* set memory back to wb and free the pages. */
@@ -277,7 +278,7 @@
{
unsigned i;
if (set_pages_array_wb(pages, npages))
- printk(KERN_ERR "[ttm] Failed to set %d pages to wb!\n",
+ printk(KERN_ERR TTM_PFX "Failed to set %d pages to wb!\n",
npages);
for (i = 0; i < npages; ++i)
__free_page(pages[i]);
@@ -313,7 +314,8 @@
pages_to_free = kmalloc(npages_to_free * sizeof(struct page *),
GFP_KERNEL);
if (!pages_to_free) {
- printk(KERN_ERR "Failed to allocate memory for pool free operation.\n");
+ printk(KERN_ERR TTM_PFX
+ "Failed to allocate memory for pool free operation.\n");
return 0;
}
@@ -384,15 +386,15 @@
unsigned i;
int total = 0;
for (i = 0; i < NUM_POOLS; ++i)
- total += _manager.pools[i].npages;
+ total += _manager->pools[i].npages;
return total;
}
/**
- * Calback for mm to request pool to reduce number of page held.
+ * Callback for mm to request pool to reduce number of page held.
*/
-static int ttm_pool_mm_shrink(int shrink_pages, gfp_t gfp_mask)
+static int ttm_pool_mm_shrink(struct shrinker *shrink, int shrink_pages, gfp_t gfp_mask)
{
static atomic_t start_pool = ATOMIC_INIT(0);
unsigned i;
@@ -405,7 +407,7 @@
unsigned nr_free = shrink_pages;
if (shrink_pages == 0)
break;
- pool = &_manager.pools[(i + pool_offset)%NUM_POOLS];
+ pool = &_manager->pools[(i + pool_offset)%NUM_POOLS];
shrink_pages = ttm_page_pool_free(pool, nr_free);
}
/* return estimated number of unused pages in pool */
@@ -433,14 +435,16 @@
case tt_uncached:
r = set_pages_array_uc(pages, cpages);
if (r)
- printk(KERN_ERR "[ttm] Failed to set %d pages to uc!\n",
- cpages);
+ printk(KERN_ERR TTM_PFX
+ "Failed to set %d pages to uc!\n",
+ cpages);
break;
case tt_wc:
r = set_pages_array_wc(pages, cpages);
if (r)
- printk(KERN_ERR "[ttm] Failed to set %d pages to wc!\n",
- cpages);
+ printk(KERN_ERR TTM_PFX
+ "Failed to set %d pages to wc!\n",
+ cpages);
break;
default:
break;
@@ -458,7 +462,7 @@
struct page **failed_pages, unsigned cpages)
{
unsigned i;
- /* Failed pages has to be reed */
+ /* Failed pages have to be freed */
for (i = 0; i < cpages; ++i) {
list_del(&failed_pages[i]->lru);
__free_page(failed_pages[i]);
@@ -485,7 +489,8 @@
caching_array = kmalloc(max_cpages*sizeof(struct page *), GFP_KERNEL);
if (!caching_array) {
- printk(KERN_ERR "[ttm] unable to allocate table for new pages.");
+ printk(KERN_ERR TTM_PFX
+ "Unable to allocate table for new pages.");
return -ENOMEM;
}
@@ -493,12 +498,13 @@
p = alloc_page(gfp_flags);
if (!p) {
- printk(KERN_ERR "[ttm] unable to get page %u\n", i);
+ printk(KERN_ERR TTM_PFX "Unable to get page %u.\n", i);
/* store already allocated pages in the pool after
* setting the caching state */
if (cpages) {
- r = ttm_set_pages_caching(caching_array, cstate, cpages);
+ r = ttm_set_pages_caching(caching_array,
+ cstate, cpages);
if (r)
ttm_handle_caching_state_failure(pages,
ttm_flags, cstate,
@@ -569,10 +575,10 @@
/* If allocation request is small and there is not enough
* pages in pool we fill the pool first */
- if (count < _manager.options.small
+ if (count < _manager->options.small
&& count > pool->npages) {
struct list_head new_pages;
- unsigned alloc_size = _manager.options.alloc_size;
+ unsigned alloc_size = _manager->options.alloc_size;
/**
* Can't change page caching if in irqsave context. We have to
@@ -590,7 +596,8 @@
++pool->nrefills;
pool->npages += alloc_size;
} else {
- printk(KERN_ERR "[ttm] Failed to fill pool (%p).", pool);
+ printk(KERN_ERR TTM_PFX
+ "Failed to fill pool (%p).", pool);
/* If we have any pages left put them to the pool. */
list_for_each_entry(p, &pool->list, lru) {
++cpages;
@@ -659,7 +666,7 @@
{
struct ttm_page_pool *pool = ttm_get_pool(flags, cstate);
struct page *p = NULL;
- int gfp_flags = 0;
+ int gfp_flags = GFP_USER;
int r;
/* set zero flag for page allocation if required */
@@ -671,13 +678,14 @@
if (flags & TTM_PAGE_FLAG_DMA32)
gfp_flags |= GFP_DMA32;
else
- gfp_flags |= __GFP_HIGHMEM;
+ gfp_flags |= GFP_HIGHUSER;
for (r = 0; r < count; ++r) {
p = alloc_page(gfp_flags);
if (!p) {
- printk(KERN_ERR "[ttm] unable to allocate page.");
+ printk(KERN_ERR TTM_PFX
+ "Unable to allocate page.");
return -ENOMEM;
}
@@ -709,8 +717,9 @@
if (r) {
/* If there is any pages in the list put them back to
* the pool. */
- printk(KERN_ERR "[ttm] Failed to allocate extra pages "
- "for large request.");
+ printk(KERN_ERR TTM_PFX
+ "Failed to allocate extra pages "
+ "for large request.");
ttm_put_pages(pages, 0, flags, cstate);
return r;
}
@@ -749,8 +758,8 @@
pool->npages += page_count;
/* Check that we don't go over the pool limit */
page_count = 0;
- if (pool->npages > _manager.options.max_size) {
- page_count = pool->npages - _manager.options.max_size;
+ if (pool->npages > _manager->options.max_size) {
+ page_count = pool->npages - _manager->options.max_size;
/* free at least NUM_PAGES_TO_ALLOC number of pages
* to reduce calls to set_memory_wb */
if (page_count < NUM_PAGES_TO_ALLOC)
@@ -775,33 +784,36 @@
int ttm_page_alloc_init(struct ttm_mem_global *glob, unsigned max_pages)
{
int ret;
- if (atomic_add_return(1, &_manager.page_alloc_inited) > 1)
- return 0;
- printk(KERN_INFO "[ttm] Initializing pool allocator.\n");
+ WARN_ON(_manager);
- ttm_page_pool_init_locked(&_manager.wc_pool, GFP_HIGHUSER, "wc");
+ printk(KERN_INFO TTM_PFX "Initializing pool allocator.\n");
- ttm_page_pool_init_locked(&_manager.uc_pool, GFP_HIGHUSER, "uc");
+ _manager = kzalloc(sizeof(*_manager), GFP_KERNEL);
- ttm_page_pool_init_locked(&_manager.wc_pool_dma32, GFP_USER | GFP_DMA32,
- "wc dma");
+ ttm_page_pool_init_locked(&_manager->wc_pool, GFP_HIGHUSER, "wc");
- ttm_page_pool_init_locked(&_manager.uc_pool_dma32, GFP_USER | GFP_DMA32,
- "uc dma");
+ ttm_page_pool_init_locked(&_manager->uc_pool, GFP_HIGHUSER, "uc");
- _manager.options.max_size = max_pages;
- _manager.options.small = SMALL_ALLOCATION;
- _manager.options.alloc_size = NUM_PAGES_TO_ALLOC;
+ ttm_page_pool_init_locked(&_manager->wc_pool_dma32,
+ GFP_USER | GFP_DMA32, "wc dma");
- kobject_init(&_manager.kobj, &ttm_pool_kobj_type);
- ret = kobject_add(&_manager.kobj, &glob->kobj, "pool");
+ ttm_page_pool_init_locked(&_manager->uc_pool_dma32,
+ GFP_USER | GFP_DMA32, "uc dma");
+
+ _manager->options.max_size = max_pages;
+ _manager->options.small = SMALL_ALLOCATION;
+ _manager->options.alloc_size = NUM_PAGES_TO_ALLOC;
+
+ ret = kobject_init_and_add(&_manager->kobj, &ttm_pool_kobj_type,
+ &glob->kobj, "pool");
if (unlikely(ret != 0)) {
- kobject_put(&_manager.kobj);
+ kobject_put(&_manager->kobj);
+ _manager = NULL;
return ret;
}
- ttm_pool_mm_shrink_init(&_manager);
+ ttm_pool_mm_shrink_init(_manager);
return 0;
}
@@ -810,16 +822,14 @@
{
int i;
- if (atomic_sub_return(1, &_manager.page_alloc_inited) > 0)
- return;
-
- printk(KERN_INFO "[ttm] Finilizing pool allocator.\n");
- ttm_pool_mm_shrink_fini(&_manager);
+ printk(KERN_INFO TTM_PFX "Finalizing pool allocator.\n");
+ ttm_pool_mm_shrink_fini(_manager);
for (i = 0; i < NUM_POOLS; ++i)
- ttm_page_pool_free(&_manager.pools[i], FREE_ALL_PAGES);
+ ttm_page_pool_free(&_manager->pools[i], FREE_ALL_PAGES);
- kobject_put(&_manager.kobj);
+ kobject_put(&_manager->kobj);
+ _manager = NULL;
}
int ttm_page_alloc_debugfs(struct seq_file *m, void *data)
@@ -827,14 +837,14 @@
struct ttm_page_pool *p;
unsigned i;
char *h[] = {"pool", "refills", "pages freed", "size"};
- if (atomic_read(&_manager.page_alloc_inited) == 0) {
+ if (!_manager) {
seq_printf(m, "No pool allocator running.\n");
return 0;
}
seq_printf(m, "%6s %12s %13s %8s\n",
h[0], h[1], h[2], h[3]);
for (i = 0; i < NUM_POOLS; ++i) {
- p = &_manager.pools[i];
+ p = &_manager->pools[i];
seq_printf(m, "%6s %12ld %13ld %8d\n",
p->name, p->nrefills,
diff --git a/drivers/gpu/drm/vmwgfx/Makefile b/drivers/gpu/drm/vmwgfx/Makefile
index 1a3cb68..4505e17 100644
--- a/drivers/gpu/drm/vmwgfx/Makefile
+++ b/drivers/gpu/drm/vmwgfx/Makefile
@@ -4,6 +4,6 @@
vmwgfx-y := vmwgfx_execbuf.o vmwgfx_gmr.o vmwgfx_kms.o vmwgfx_drv.o \
vmwgfx_fb.o vmwgfx_ioctl.o vmwgfx_resource.o vmwgfx_buffer.o \
vmwgfx_fifo.o vmwgfx_irq.o vmwgfx_ldu.o vmwgfx_ttm_glue.o \
- vmwgfx_overlay.o
+ vmwgfx_overlay.o vmwgfx_fence.o
obj-$(CONFIG_DRM_VMWGFX) := vmwgfx.o
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index 0c9c081..b793c8c 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -88,6 +88,9 @@
#define DRM_IOCTL_VMW_FENCE_WAIT \
DRM_IOWR(DRM_COMMAND_BASE + DRM_VMW_FENCE_WAIT, \
struct drm_vmw_fence_wait_arg)
+#define DRM_IOCTL_VMW_UPDATE_LAYOUT \
+ DRM_IOWR(DRM_COMMAND_BASE + DRM_VMW_UPDATE_LAYOUT, \
+ struct drm_vmw_update_layout_arg)
/**
@@ -135,7 +138,9 @@
VMW_IOCTL_DEF(DRM_IOCTL_VMW_FIFO_DEBUG, vmw_fifo_debug_ioctl,
DRM_AUTH | DRM_ROOT_ONLY | DRM_MASTER | DRM_UNLOCKED),
VMW_IOCTL_DEF(DRM_IOCTL_VMW_FENCE_WAIT, vmw_fence_wait_ioctl,
- DRM_AUTH | DRM_UNLOCKED)
+ DRM_AUTH | DRM_UNLOCKED),
+ VMW_IOCTL_DEF(DRM_IOCTL_VMW_UPDATE_LAYOUT, vmw_kms_update_layout_ioctl,
+ DRM_MASTER | DRM_CONTROL_ALLOW | DRM_UNLOCKED)
};
static struct pci_device_id vmw_pci_id_list[] = {
@@ -318,6 +323,15 @@
goto out_err3;
}
+ /* Need mmio memory to check for fifo pitchlock cap. */
+ if (!(dev_priv->capabilities & SVGA_CAP_DISPLAY_TOPOLOGY) &&
+ !(dev_priv->capabilities & SVGA_CAP_PITCHLOCK) &&
+ !vmw_fifo_have_pitchlock(dev_priv)) {
+ ret = -ENOSYS;
+ DRM_ERROR("Hardware has no pitchlock\n");
+ goto out_err4;
+ }
+
dev_priv->tdev = ttm_object_device_init
(dev_priv->mem_global_ref.object, 12);
@@ -399,8 +413,6 @@
{
struct vmw_private *dev_priv = vmw_priv(dev);
- DRM_INFO(VMWGFX_DRIVER_NAME " unload.\n");
-
unregister_pm_notifier(&dev_priv->pm_nb);
vmw_fb_close(dev_priv);
@@ -546,7 +558,6 @@
{
struct vmw_master *vmaster;
- DRM_INFO("Master create.\n");
vmaster = kzalloc(sizeof(*vmaster), GFP_KERNEL);
if (unlikely(vmaster == NULL))
return -ENOMEM;
@@ -563,7 +574,6 @@
{
struct vmw_master *vmaster = vmw_master(master);
- DRM_INFO("Master destroy.\n");
master->driver_priv = NULL;
kfree(vmaster);
}
@@ -579,8 +589,6 @@
struct vmw_master *vmaster = vmw_master(file_priv->master);
int ret = 0;
- DRM_INFO("Master set.\n");
-
if (active) {
BUG_ON(active != &dev_priv->fbdev_master);
ret = ttm_vt_lock(&active->lock, false, vmw_fp->tfile);
@@ -622,8 +630,6 @@
struct vmw_master *vmaster = vmw_master(file_priv->master);
int ret;
- DRM_INFO("Master drop.\n");
-
/**
* Make sure the master doesn't disappear while we have
* it locked.
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
index 356dc93..eaad520 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
@@ -41,12 +41,13 @@
#define VMWGFX_DRIVER_DATE "20100209"
#define VMWGFX_DRIVER_MAJOR 1
-#define VMWGFX_DRIVER_MINOR 0
+#define VMWGFX_DRIVER_MINOR 2
#define VMWGFX_DRIVER_PATCHLEVEL 0
#define VMWGFX_FILE_PAGE_OFFSET 0x00100000
#define VMWGFX_FIFO_STATIC_SIZE (1024*1024)
#define VMWGFX_MAX_RELOCATIONS 2048
#define VMWGFX_MAX_GMRS 2048
+#define VMWGFX_MAX_DISPLAYS 16
struct vmw_fpriv {
struct drm_master *locked_master;
@@ -102,6 +103,13 @@
struct vmw_cursor_snooper snooper;
};
+struct vmw_fence_queue {
+ struct list_head head;
+ struct timespec lag;
+ struct timespec lag_time;
+ spinlock_t lock;
+};
+
struct vmw_fifo_state {
unsigned long reserved_size;
__le32 *dynamic_buffer;
@@ -115,6 +123,7 @@
uint32_t capabilities;
struct mutex fifo_mutex;
struct rw_semaphore rwsem;
+ struct vmw_fence_queue fence_queue;
};
struct vmw_relocation {
@@ -144,6 +153,14 @@
struct ttm_lock lock;
};
+struct vmw_vga_topology_state {
+ uint32_t width;
+ uint32_t height;
+ uint32_t primary;
+ uint32_t pos_x;
+ uint32_t pos_y;
+};
+
struct vmw_private {
struct ttm_bo_device bdev;
struct ttm_bo_global_ref bo_global_ref;
@@ -171,14 +188,19 @@
* VGA registers.
*/
+ struct vmw_vga_topology_state vga_save[VMWGFX_MAX_DISPLAYS];
uint32_t vga_width;
uint32_t vga_height;
uint32_t vga_depth;
uint32_t vga_bpp;
uint32_t vga_pseudo;
uint32_t vga_red_mask;
- uint32_t vga_blue_mask;
uint32_t vga_green_mask;
+ uint32_t vga_blue_mask;
+ uint32_t vga_bpl;
+ uint32_t vga_pitchlock;
+
+ uint32_t num_displays;
/*
* Framebuffer info.
@@ -393,6 +415,7 @@
extern void vmw_fifo_ping_host(struct vmw_private *dev_priv, uint32_t reason);
extern int vmw_fifo_mmap(struct file *filp, struct vm_area_struct *vma);
extern bool vmw_fifo_have_3d(struct vmw_private *dev_priv);
+extern bool vmw_fifo_have_pitchlock(struct vmw_private *dev_priv);
/**
* TTM glue - vmwgfx_ttm_glue.c
@@ -441,6 +464,23 @@
uint32_t sequence,
bool interruptible,
unsigned long timeout);
+extern void vmw_update_sequence(struct vmw_private *dev_priv,
+ struct vmw_fifo_state *fifo_state);
+
+
+/**
+ * Rudimentary fence objects currently used only for throttling -
+ * vmwgfx_fence.c
+ */
+
+extern void vmw_fence_queue_init(struct vmw_fence_queue *queue);
+extern void vmw_fence_queue_takedown(struct vmw_fence_queue *queue);
+extern int vmw_fence_push(struct vmw_fence_queue *queue,
+ uint32_t sequence);
+extern int vmw_fence_pull(struct vmw_fence_queue *queue,
+ uint32_t signaled_sequence);
+extern int vmw_wait_lag(struct vmw_private *dev_priv,
+ struct vmw_fence_queue *queue, uint32_t us);
/**
* Kernel framebuffer - vmwgfx_fb.c
@@ -466,6 +506,11 @@
struct ttm_object_file *tfile,
struct ttm_buffer_object *bo,
SVGA3dCmdHeader *header);
+void vmw_kms_write_svga(struct vmw_private *vmw_priv,
+ unsigned width, unsigned height, unsigned pitch,
+ unsigned bbp, unsigned depth);
+int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
/**
* Overlay control - vmwgfx_overlay.c
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
index dbd36b8..8e39685 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
@@ -644,6 +644,7 @@
ret = copy_from_user(cmd, user_cmd, arg->command_size);
if (unlikely(ret != 0)) {
+ ret = -EFAULT;
DRM_ERROR("Failed copying commands.\n");
goto out_commit;
}
@@ -669,6 +670,15 @@
goto out_err;
vmw_apply_relocations(sw_context);
+
+ if (arg->throttle_us) {
+ ret = vmw_wait_lag(dev_priv, &dev_priv->fifo.fence_queue,
+ arg->throttle_us);
+
+ if (unlikely(ret != 0))
+ goto out_err;
+ }
+
vmw_fifo_commit(dev_priv, arg->command_size);
ret = vmw_fifo_send_fence(dev_priv, &sequence);
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
index 7421aaa..b0866f0 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
@@ -132,16 +132,14 @@
return -EINVAL;
}
- /* without multimon its hard to resize */
- if (!(vmw_priv->capabilities & SVGA_CAP_MULTIMON) &&
- (var->xres != par->max_width ||
- var->yres != par->max_height)) {
- DRM_ERROR("Tried to resize, but we don't have multimon\n");
+ if (!(vmw_priv->capabilities & SVGA_CAP_DISPLAY_TOPOLOGY) &&
+ (var->xoffset != 0 || var->yoffset != 0)) {
+ DRM_ERROR("Can not handle panning without display topology\n");
return -EINVAL;
}
- if (var->xres > par->max_width ||
- var->yres > par->max_height) {
+ if ((var->xoffset + var->xres) > par->max_width ||
+ (var->yoffset + var->yres) > par->max_height) {
DRM_ERROR("Requested geom can not fit in framebuffer\n");
return -EINVAL;
}
@@ -154,27 +152,11 @@
struct vmw_fb_par *par = info->par;
struct vmw_private *vmw_priv = par->vmw_priv;
- if (vmw_priv->capabilities & SVGA_CAP_MULTIMON) {
- vmw_write(vmw_priv, SVGA_REG_NUM_GUEST_DISPLAYS, 1);
- vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, 0);
- vmw_write(vmw_priv, SVGA_REG_DISPLAY_IS_PRIMARY, true);
- vmw_write(vmw_priv, SVGA_REG_DISPLAY_POSITION_X, 0);
- vmw_write(vmw_priv, SVGA_REG_DISPLAY_POSITION_Y, 0);
- vmw_write(vmw_priv, SVGA_REG_DISPLAY_WIDTH, 0);
- vmw_write(vmw_priv, SVGA_REG_DISPLAY_HEIGHT, 0);
- vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID);
-
- vmw_write(vmw_priv, SVGA_REG_ENABLE, 1);
- vmw_write(vmw_priv, SVGA_REG_WIDTH, par->max_width);
- vmw_write(vmw_priv, SVGA_REG_HEIGHT, par->max_height);
- vmw_write(vmw_priv, SVGA_REG_BITS_PER_PIXEL, par->bpp);
- vmw_write(vmw_priv, SVGA_REG_DEPTH, par->depth);
- vmw_write(vmw_priv, SVGA_REG_RED_MASK, 0x00ff0000);
- vmw_write(vmw_priv, SVGA_REG_GREEN_MASK, 0x0000ff00);
- vmw_write(vmw_priv, SVGA_REG_BLUE_MASK, 0x000000ff);
-
+ vmw_kms_write_svga(vmw_priv, info->var.xres, info->var.yres,
+ info->fix.line_length,
+ par->bpp, par->depth);
+ if (vmw_priv->capabilities & SVGA_CAP_DISPLAY_TOPOLOGY) {
/* TODO check if pitch and offset changes */
-
vmw_write(vmw_priv, SVGA_REG_NUM_GUEST_DISPLAYS, 1);
vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, 0);
vmw_write(vmw_priv, SVGA_REG_DISPLAY_IS_PRIMARY, true);
@@ -183,13 +165,13 @@
vmw_write(vmw_priv, SVGA_REG_DISPLAY_WIDTH, info->var.xres);
vmw_write(vmw_priv, SVGA_REG_DISPLAY_HEIGHT, info->var.yres);
vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID);
- } else {
- vmw_write(vmw_priv, SVGA_REG_WIDTH, info->var.xres);
- vmw_write(vmw_priv, SVGA_REG_HEIGHT, info->var.yres);
-
- /* TODO check if pitch and offset changes */
}
+ /* This is really helpful since if this fails the user
+ * can probably not see anything on the screen.
+ */
+ WARN_ON(vmw_read(vmw_priv, SVGA_REG_FB_OFFSET) != 0);
+
return 0;
}
@@ -416,48 +398,23 @@
unsigned fb_bbp, fb_depth, fb_offset, fb_pitch, fb_size;
int ret;
+ /* XXX These shouldn't be hardcoded. */
initial_width = 800;
initial_height = 600;
fb_bbp = 32;
fb_depth = 24;
- if (vmw_priv->capabilities & SVGA_CAP_MULTIMON) {
- fb_width = min(vmw_priv->fb_max_width, (unsigned)2048);
- fb_height = min(vmw_priv->fb_max_height, (unsigned)2048);
- } else {
- fb_width = min(vmw_priv->fb_max_width, initial_width);
- fb_height = min(vmw_priv->fb_max_height, initial_height);
- }
+ /* XXX As shouldn't these be as well. */
+ fb_width = min(vmw_priv->fb_max_width, (unsigned)2048);
+ fb_height = min(vmw_priv->fb_max_height, (unsigned)2048);
initial_width = min(fb_width, initial_width);
initial_height = min(fb_height, initial_height);
- vmw_write(vmw_priv, SVGA_REG_WIDTH, fb_width);
- vmw_write(vmw_priv, SVGA_REG_HEIGHT, fb_height);
- vmw_write(vmw_priv, SVGA_REG_BITS_PER_PIXEL, fb_bbp);
- vmw_write(vmw_priv, SVGA_REG_DEPTH, fb_depth);
- vmw_write(vmw_priv, SVGA_REG_RED_MASK, 0x00ff0000);
- vmw_write(vmw_priv, SVGA_REG_GREEN_MASK, 0x0000ff00);
- vmw_write(vmw_priv, SVGA_REG_BLUE_MASK, 0x000000ff);
-
- fb_size = vmw_read(vmw_priv, SVGA_REG_FB_SIZE);
+ fb_pitch = fb_width * fb_bbp / 8;
+ fb_size = fb_pitch * fb_height;
fb_offset = vmw_read(vmw_priv, SVGA_REG_FB_OFFSET);
- fb_pitch = vmw_read(vmw_priv, SVGA_REG_BYTES_PER_LINE);
-
- DRM_DEBUG("width %u\n", vmw_read(vmw_priv, SVGA_REG_MAX_WIDTH));
- DRM_DEBUG("height %u\n", vmw_read(vmw_priv, SVGA_REG_MAX_HEIGHT));
- DRM_DEBUG("width %u\n", vmw_read(vmw_priv, SVGA_REG_WIDTH));
- DRM_DEBUG("height %u\n", vmw_read(vmw_priv, SVGA_REG_HEIGHT));
- DRM_DEBUG("bpp %u\n", vmw_read(vmw_priv, SVGA_REG_BITS_PER_PIXEL));
- DRM_DEBUG("depth %u\n", vmw_read(vmw_priv, SVGA_REG_DEPTH));
- DRM_DEBUG("bpl %u\n", vmw_read(vmw_priv, SVGA_REG_BYTES_PER_LINE));
- DRM_DEBUG("r mask %08x\n", vmw_read(vmw_priv, SVGA_REG_RED_MASK));
- DRM_DEBUG("g mask %08x\n", vmw_read(vmw_priv, SVGA_REG_GREEN_MASK));
- DRM_DEBUG("b mask %08x\n", vmw_read(vmw_priv, SVGA_REG_BLUE_MASK));
- DRM_DEBUG("fb_offset 0x%08x\n", fb_offset);
- DRM_DEBUG("fb_pitch %u\n", fb_pitch);
- DRM_DEBUG("fb_size %u kiB\n", fb_size / 1024);
info = framebuffer_alloc(sizeof(*par), device);
if (!info)
@@ -659,6 +616,10 @@
goto err_unlock;
ret = ttm_bo_validate(bo, &ne_placement, false, false, false);
+
+ /* Could probably bug on */
+ WARN_ON(bo->offset != 0);
+
ttm_bo_unreserve(bo);
err_unlock:
ttm_write_unlock(&vmw_priv->active_master->lock);
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
new file mode 100644
index 0000000..61eacc1
--- /dev/null
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
@@ -0,0 +1,173 @@
+/**************************************************************************
+ *
+ * Copyright (C) 2010 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+
+
+#include "vmwgfx_drv.h"
+
+struct vmw_fence {
+ struct list_head head;
+ uint32_t sequence;
+ struct timespec submitted;
+};
+
+void vmw_fence_queue_init(struct vmw_fence_queue *queue)
+{
+ INIT_LIST_HEAD(&queue->head);
+ queue->lag = ns_to_timespec(0);
+ getrawmonotonic(&queue->lag_time);
+ spin_lock_init(&queue->lock);
+}
+
+void vmw_fence_queue_takedown(struct vmw_fence_queue *queue)
+{
+ struct vmw_fence *fence, *next;
+
+ spin_lock(&queue->lock);
+ list_for_each_entry_safe(fence, next, &queue->head, head) {
+ kfree(fence);
+ }
+ spin_unlock(&queue->lock);
+}
+
+int vmw_fence_push(struct vmw_fence_queue *queue,
+ uint32_t sequence)
+{
+ struct vmw_fence *fence = kmalloc(sizeof(*fence), GFP_KERNEL);
+
+ if (unlikely(!fence))
+ return -ENOMEM;
+
+ fence->sequence = sequence;
+ getrawmonotonic(&fence->submitted);
+ spin_lock(&queue->lock);
+ list_add_tail(&fence->head, &queue->head);
+ spin_unlock(&queue->lock);
+
+ return 0;
+}
+
+int vmw_fence_pull(struct vmw_fence_queue *queue,
+ uint32_t signaled_sequence)
+{
+ struct vmw_fence *fence, *next;
+ struct timespec now;
+ bool updated = false;
+
+ spin_lock(&queue->lock);
+ getrawmonotonic(&now);
+
+ if (list_empty(&queue->head)) {
+ queue->lag = ns_to_timespec(0);
+ queue->lag_time = now;
+ updated = true;
+ goto out_unlock;
+ }
+
+ list_for_each_entry_safe(fence, next, &queue->head, head) {
+ if (signaled_sequence - fence->sequence > (1 << 30))
+ continue;
+
+ queue->lag = timespec_sub(now, fence->submitted);
+ queue->lag_time = now;
+ updated = true;
+ list_del(&fence->head);
+ kfree(fence);
+ }
+
+out_unlock:
+ spin_unlock(&queue->lock);
+
+ return (updated) ? 0 : -EBUSY;
+}
+
+static struct timespec vmw_timespec_add(struct timespec t1,
+ struct timespec t2)
+{
+ t1.tv_sec += t2.tv_sec;
+ t1.tv_nsec += t2.tv_nsec;
+ if (t1.tv_nsec >= 1000000000L) {
+ t1.tv_sec += 1;
+ t1.tv_nsec -= 1000000000L;
+ }
+
+ return t1;
+}
+
+static struct timespec vmw_fifo_lag(struct vmw_fence_queue *queue)
+{
+ struct timespec now;
+
+ spin_lock(&queue->lock);
+ getrawmonotonic(&now);
+ queue->lag = vmw_timespec_add(queue->lag,
+ timespec_sub(now, queue->lag_time));
+ queue->lag_time = now;
+ spin_unlock(&queue->lock);
+ return queue->lag;
+}
+
+
+static bool vmw_lag_lt(struct vmw_fence_queue *queue,
+ uint32_t us)
+{
+ struct timespec lag, cond;
+
+ cond = ns_to_timespec((s64) us * 1000);
+ lag = vmw_fifo_lag(queue);
+ return (timespec_compare(&lag, &cond) < 1);
+}
+
+int vmw_wait_lag(struct vmw_private *dev_priv,
+ struct vmw_fence_queue *queue, uint32_t us)
+{
+ struct vmw_fence *fence;
+ uint32_t sequence;
+ int ret;
+
+ while (!vmw_lag_lt(queue, us)) {
+ spin_lock(&queue->lock);
+ if (list_empty(&queue->head))
+ sequence = atomic_read(&dev_priv->fence_seq);
+ else {
+ fence = list_first_entry(&queue->head,
+ struct vmw_fence, head);
+ sequence = fence->sequence;
+ }
+ spin_unlock(&queue->lock);
+
+ ret = vmw_wait_fence(dev_priv, false, sequence, true,
+ 3*HZ);
+
+ if (unlikely(ret != 0))
+ return ret;
+
+ (void) vmw_fence_pull(queue, sequence);
+ }
+ return 0;
+}
+
+
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
index 39d43a0..e6a1eb7 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
@@ -34,6 +34,9 @@
__le32 __iomem *fifo_mem = dev_priv->mmio_virt;
uint32_t fifo_min, hwversion;
+ if (!(dev_priv->capabilities & SVGA_CAP_EXTENDED_FIFO))
+ return false;
+
fifo_min = ioread32(fifo_mem + SVGA_FIFO_MIN);
if (fifo_min <= SVGA_FIFO_3D_HWVERSION * sizeof(unsigned int))
return false;
@@ -48,6 +51,21 @@
return true;
}
+bool vmw_fifo_have_pitchlock(struct vmw_private *dev_priv)
+{
+ __le32 __iomem *fifo_mem = dev_priv->mmio_virt;
+ uint32_t caps;
+
+ if (!(dev_priv->capabilities & SVGA_CAP_EXTENDED_FIFO))
+ return false;
+
+ caps = ioread32(fifo_mem + SVGA_FIFO_CAPABILITIES);
+ if (caps & SVGA_FIFO_CAP_PITCHLOCK)
+ return true;
+
+ return false;
+}
+
int vmw_fifo_init(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo)
{
__le32 __iomem *fifo_mem = dev_priv->mmio_virt;
@@ -120,7 +138,7 @@
atomic_set(&dev_priv->fence_seq, dev_priv->last_read_sequence);
iowrite32(dev_priv->last_read_sequence, fifo_mem + SVGA_FIFO_FENCE);
-
+ vmw_fence_queue_init(&fifo->fence_queue);
return vmw_fifo_send_fence(dev_priv, &dummy);
out_err:
vfree(fifo->static_buffer);
@@ -159,6 +177,7 @@
dev_priv->enable_state);
mutex_unlock(&dev_priv->hw_mutex);
+ vmw_fence_queue_takedown(&fifo->fence_queue);
if (likely(fifo->last_buffer != NULL)) {
vfree(fifo->last_buffer);
@@ -484,6 +503,8 @@
fifo_state->last_buffer_add = true;
vmw_fifo_commit(dev_priv, bytes);
fifo_state->last_buffer_add = false;
+ (void) vmw_fence_push(&fifo_state->fence_queue, *sequence);
+ vmw_update_sequence(dev_priv, fifo_state);
out_err:
return ret;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c
index 4d7cb53..e92298a 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c
@@ -64,22 +64,33 @@
return (busy == 0);
}
+void vmw_update_sequence(struct vmw_private *dev_priv,
+ struct vmw_fifo_state *fifo_state)
+{
+ __le32 __iomem *fifo_mem = dev_priv->mmio_virt;
+
+ uint32_t sequence = ioread32(fifo_mem + SVGA_FIFO_FENCE);
+
+ if (dev_priv->last_read_sequence != sequence) {
+ dev_priv->last_read_sequence = sequence;
+ vmw_fence_pull(&fifo_state->fence_queue, sequence);
+ }
+}
bool vmw_fence_signaled(struct vmw_private *dev_priv,
uint32_t sequence)
{
- __le32 __iomem *fifo_mem = dev_priv->mmio_virt;
struct vmw_fifo_state *fifo_state;
bool ret;
if (likely(dev_priv->last_read_sequence - sequence < VMW_FENCE_WRAP))
return true;
- dev_priv->last_read_sequence = ioread32(fifo_mem + SVGA_FIFO_FENCE);
+ fifo_state = &dev_priv->fifo;
+ vmw_update_sequence(dev_priv, fifo_state);
if (likely(dev_priv->last_read_sequence - sequence < VMW_FENCE_WRAP))
return true;
- fifo_state = &dev_priv->fifo;
if (!(fifo_state->capabilities & SVGA_FIFO_CAP_FENCE) &&
vmw_fifo_idle(dev_priv, sequence))
return true;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index bbc7c4c..437ac78 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -30,6 +30,8 @@
/* Might need a hrtimer here? */
#define VMWGFX_PRESENT_RATE ((HZ / 60 > 0) ? HZ / 60 : 1)
+static int vmw_surface_dmabuf_pin(struct vmw_framebuffer *vfb);
+static int vmw_surface_dmabuf_unpin(struct vmw_framebuffer *vfb);
void vmw_display_unit_cleanup(struct vmw_display_unit *du)
{
@@ -326,6 +328,7 @@
struct vmw_framebuffer_surface {
struct vmw_framebuffer base;
struct vmw_surface *surface;
+ struct vmw_dma_buffer *buffer;
struct delayed_work d_work;
struct mutex work_lock;
bool present_fs;
@@ -500,8 +503,8 @@
vfbs->base.base.depth = 24;
vfbs->base.base.width = width;
vfbs->base.base.height = height;
- vfbs->base.pin = NULL;
- vfbs->base.unpin = NULL;
+ vfbs->base.pin = &vmw_surface_dmabuf_pin;
+ vfbs->base.unpin = &vmw_surface_dmabuf_unpin;
vfbs->surface = surface;
mutex_init(&vfbs->work_lock);
INIT_DELAYED_WORK(&vfbs->d_work, &vmw_framebuffer_present_fs_callback);
@@ -589,6 +592,40 @@
.create_handle = vmw_framebuffer_create_handle,
};
+static int vmw_surface_dmabuf_pin(struct vmw_framebuffer *vfb)
+{
+ struct vmw_private *dev_priv = vmw_priv(vfb->base.dev);
+ struct vmw_framebuffer_surface *vfbs =
+ vmw_framebuffer_to_vfbs(&vfb->base);
+ unsigned long size = vfbs->base.base.pitch * vfbs->base.base.height;
+ int ret;
+
+ vfbs->buffer = kzalloc(sizeof(*vfbs->buffer), GFP_KERNEL);
+ if (unlikely(vfbs->buffer == NULL))
+ return -ENOMEM;
+
+ vmw_overlay_pause_all(dev_priv);
+ ret = vmw_dmabuf_init(dev_priv, vfbs->buffer, size,
+ &vmw_vram_ne_placement,
+ false, &vmw_dmabuf_bo_free);
+ vmw_overlay_resume_all(dev_priv);
+
+ return ret;
+}
+
+static int vmw_surface_dmabuf_unpin(struct vmw_framebuffer *vfb)
+{
+ struct ttm_buffer_object *bo;
+ struct vmw_framebuffer_surface *vfbs =
+ vmw_framebuffer_to_vfbs(&vfb->base);
+
+ bo = &vfbs->buffer->base;
+ ttm_bo_unref(&bo);
+ vfbs->buffer = NULL;
+
+ return 0;
+}
+
static int vmw_framebuffer_dmabuf_pin(struct vmw_framebuffer *vfb)
{
struct vmw_private *dev_priv = vmw_priv(vfb->base.dev);
@@ -596,33 +633,15 @@
vmw_framebuffer_to_vfbd(&vfb->base);
int ret;
+
vmw_overlay_pause_all(dev_priv);
ret = vmw_dmabuf_to_start_of_vram(dev_priv, vfbd->buffer);
- if (dev_priv->capabilities & SVGA_CAP_MULTIMON) {
- vmw_write(dev_priv, SVGA_REG_NUM_GUEST_DISPLAYS, 1);
- vmw_write(dev_priv, SVGA_REG_DISPLAY_ID, 0);
- vmw_write(dev_priv, SVGA_REG_DISPLAY_IS_PRIMARY, true);
- vmw_write(dev_priv, SVGA_REG_DISPLAY_POSITION_X, 0);
- vmw_write(dev_priv, SVGA_REG_DISPLAY_POSITION_Y, 0);
- vmw_write(dev_priv, SVGA_REG_DISPLAY_WIDTH, 0);
- vmw_write(dev_priv, SVGA_REG_DISPLAY_HEIGHT, 0);
- vmw_write(dev_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID);
-
- vmw_write(dev_priv, SVGA_REG_ENABLE, 1);
- vmw_write(dev_priv, SVGA_REG_WIDTH, vfb->base.width);
- vmw_write(dev_priv, SVGA_REG_HEIGHT, vfb->base.height);
- vmw_write(dev_priv, SVGA_REG_BITS_PER_PIXEL, vfb->base.bits_per_pixel);
- vmw_write(dev_priv, SVGA_REG_DEPTH, vfb->base.depth);
- vmw_write(dev_priv, SVGA_REG_RED_MASK, 0x00ff0000);
- vmw_write(dev_priv, SVGA_REG_GREEN_MASK, 0x0000ff00);
- vmw_write(dev_priv, SVGA_REG_BLUE_MASK, 0x000000ff);
- } else
- WARN_ON(true);
-
vmw_overlay_resume_all(dev_priv);
+ WARN_ON(ret != 0);
+
return 0;
}
@@ -668,7 +687,7 @@
/* XXX get the first 3 from the surface info */
vfbd->base.base.bits_per_pixel = 32;
- vfbd->base.base.pitch = width * 32 / 4;
+ vfbd->base.base.pitch = width * vfbd->base.base.bits_per_pixel / 8;
vfbd->base.base.depth = 24;
vfbd->base.base.width = width;
vfbd->base.base.height = height;
@@ -765,8 +784,9 @@
dev->mode_config.funcs = &vmw_kms_funcs;
dev->mode_config.min_width = 1;
dev->mode_config.min_height = 1;
- dev->mode_config.max_width = dev_priv->fb_max_width;
- dev->mode_config.max_height = dev_priv->fb_max_height;
+ /* assumed largest fb size */
+ dev->mode_config.max_width = 8192;
+ dev->mode_config.max_height = 8192;
ret = vmw_kms_init_legacy_display_system(dev_priv);
@@ -826,49 +846,141 @@
return ret;
}
+void vmw_kms_write_svga(struct vmw_private *vmw_priv,
+ unsigned width, unsigned height, unsigned pitch,
+ unsigned bbp, unsigned depth)
+{
+ if (vmw_priv->capabilities & SVGA_CAP_PITCHLOCK)
+ vmw_write(vmw_priv, SVGA_REG_PITCHLOCK, pitch);
+ else if (vmw_fifo_have_pitchlock(vmw_priv))
+ iowrite32(pitch, vmw_priv->mmio_virt + SVGA_FIFO_PITCHLOCK);
+ vmw_write(vmw_priv, SVGA_REG_WIDTH, width);
+ vmw_write(vmw_priv, SVGA_REG_HEIGHT, height);
+ vmw_write(vmw_priv, SVGA_REG_BITS_PER_PIXEL, bbp);
+ vmw_write(vmw_priv, SVGA_REG_DEPTH, depth);
+ vmw_write(vmw_priv, SVGA_REG_RED_MASK, 0x00ff0000);
+ vmw_write(vmw_priv, SVGA_REG_GREEN_MASK, 0x0000ff00);
+ vmw_write(vmw_priv, SVGA_REG_BLUE_MASK, 0x000000ff);
+}
+
int vmw_kms_save_vga(struct vmw_private *vmw_priv)
{
- /*
- * setup a single multimon monitor with the size
- * of 0x0, this stops the UI from resizing when we
- * change the framebuffer size
- */
- if (vmw_priv->capabilities & SVGA_CAP_MULTIMON) {
- vmw_write(vmw_priv, SVGA_REG_NUM_GUEST_DISPLAYS, 1);
- vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, 0);
- vmw_write(vmw_priv, SVGA_REG_DISPLAY_IS_PRIMARY, true);
- vmw_write(vmw_priv, SVGA_REG_DISPLAY_POSITION_X, 0);
- vmw_write(vmw_priv, SVGA_REG_DISPLAY_POSITION_Y, 0);
- vmw_write(vmw_priv, SVGA_REG_DISPLAY_WIDTH, 0);
- vmw_write(vmw_priv, SVGA_REG_DISPLAY_HEIGHT, 0);
- vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID);
- }
+ struct vmw_vga_topology_state *save;
+ uint32_t i;
vmw_priv->vga_width = vmw_read(vmw_priv, SVGA_REG_WIDTH);
vmw_priv->vga_height = vmw_read(vmw_priv, SVGA_REG_HEIGHT);
- vmw_priv->vga_bpp = vmw_read(vmw_priv, SVGA_REG_BITS_PER_PIXEL);
vmw_priv->vga_depth = vmw_read(vmw_priv, SVGA_REG_DEPTH);
+ vmw_priv->vga_bpp = vmw_read(vmw_priv, SVGA_REG_BITS_PER_PIXEL);
vmw_priv->vga_pseudo = vmw_read(vmw_priv, SVGA_REG_PSEUDOCOLOR);
vmw_priv->vga_red_mask = vmw_read(vmw_priv, SVGA_REG_RED_MASK);
- vmw_priv->vga_green_mask = vmw_read(vmw_priv, SVGA_REG_GREEN_MASK);
vmw_priv->vga_blue_mask = vmw_read(vmw_priv, SVGA_REG_BLUE_MASK);
+ vmw_priv->vga_green_mask = vmw_read(vmw_priv, SVGA_REG_GREEN_MASK);
+ if (vmw_priv->capabilities & SVGA_CAP_PITCHLOCK)
+ vmw_priv->vga_pitchlock =
+ vmw_read(vmw_priv, SVGA_REG_PITCHLOCK);
+ else if (vmw_fifo_have_pitchlock(vmw_priv))
+ vmw_priv->vga_pitchlock = ioread32(vmw_priv->mmio_virt +
+ SVGA_FIFO_PITCHLOCK);
+ if (!(vmw_priv->capabilities & SVGA_CAP_DISPLAY_TOPOLOGY))
+ return 0;
+
+ vmw_priv->num_displays = vmw_read(vmw_priv,
+ SVGA_REG_NUM_GUEST_DISPLAYS);
+
+ for (i = 0; i < vmw_priv->num_displays; ++i) {
+ save = &vmw_priv->vga_save[i];
+ vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, i);
+ save->primary = vmw_read(vmw_priv, SVGA_REG_DISPLAY_IS_PRIMARY);
+ save->pos_x = vmw_read(vmw_priv, SVGA_REG_DISPLAY_POSITION_X);
+ save->pos_y = vmw_read(vmw_priv, SVGA_REG_DISPLAY_POSITION_Y);
+ save->width = vmw_read(vmw_priv, SVGA_REG_DISPLAY_WIDTH);
+ save->height = vmw_read(vmw_priv, SVGA_REG_DISPLAY_HEIGHT);
+ vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID);
+ }
return 0;
}
int vmw_kms_restore_vga(struct vmw_private *vmw_priv)
{
+ struct vmw_vga_topology_state *save;
+ uint32_t i;
+
vmw_write(vmw_priv, SVGA_REG_WIDTH, vmw_priv->vga_width);
vmw_write(vmw_priv, SVGA_REG_HEIGHT, vmw_priv->vga_height);
- vmw_write(vmw_priv, SVGA_REG_BITS_PER_PIXEL, vmw_priv->vga_bpp);
vmw_write(vmw_priv, SVGA_REG_DEPTH, vmw_priv->vga_depth);
+ vmw_write(vmw_priv, SVGA_REG_BITS_PER_PIXEL, vmw_priv->vga_bpp);
vmw_write(vmw_priv, SVGA_REG_PSEUDOCOLOR, vmw_priv->vga_pseudo);
vmw_write(vmw_priv, SVGA_REG_RED_MASK, vmw_priv->vga_red_mask);
vmw_write(vmw_priv, SVGA_REG_GREEN_MASK, vmw_priv->vga_green_mask);
vmw_write(vmw_priv, SVGA_REG_BLUE_MASK, vmw_priv->vga_blue_mask);
+ if (vmw_priv->capabilities & SVGA_CAP_PITCHLOCK)
+ vmw_write(vmw_priv, SVGA_REG_PITCHLOCK,
+ vmw_priv->vga_pitchlock);
+ else if (vmw_fifo_have_pitchlock(vmw_priv))
+ iowrite32(vmw_priv->vga_pitchlock,
+ vmw_priv->mmio_virt + SVGA_FIFO_PITCHLOCK);
- /* TODO check for multimon */
- vmw_write(vmw_priv, SVGA_REG_NUM_GUEST_DISPLAYS, 0);
+ if (!(vmw_priv->capabilities & SVGA_CAP_DISPLAY_TOPOLOGY))
+ return 0;
+
+ for (i = 0; i < vmw_priv->num_displays; ++i) {
+ save = &vmw_priv->vga_save[i];
+ vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, i);
+ vmw_write(vmw_priv, SVGA_REG_DISPLAY_IS_PRIMARY, save->primary);
+ vmw_write(vmw_priv, SVGA_REG_DISPLAY_POSITION_X, save->pos_x);
+ vmw_write(vmw_priv, SVGA_REG_DISPLAY_POSITION_Y, save->pos_y);
+ vmw_write(vmw_priv, SVGA_REG_DISPLAY_WIDTH, save->width);
+ vmw_write(vmw_priv, SVGA_REG_DISPLAY_HEIGHT, save->height);
+ vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID);
+ }
return 0;
}
+
+int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct vmw_private *dev_priv = vmw_priv(dev);
+ struct drm_vmw_update_layout_arg *arg =
+ (struct drm_vmw_update_layout_arg *)data;
+ struct vmw_master *vmaster = vmw_master(file_priv->master);
+ void __user *user_rects;
+ struct drm_vmw_rect *rects;
+ unsigned rects_size;
+ int ret;
+
+ ret = ttm_read_lock(&vmaster->lock, true);
+ if (unlikely(ret != 0))
+ return ret;
+
+ if (!arg->num_outputs) {
+ struct drm_vmw_rect def_rect = {0, 0, 800, 600};
+ vmw_kms_ldu_update_layout(dev_priv, 1, &def_rect);
+ goto out_unlock;
+ }
+
+ rects_size = arg->num_outputs * sizeof(struct drm_vmw_rect);
+ rects = kzalloc(rects_size, GFP_KERNEL);
+ if (unlikely(!rects)) {
+ ret = -ENOMEM;
+ goto out_unlock;
+ }
+
+ user_rects = (void __user *)(unsigned long)arg->rects;
+ ret = copy_from_user(rects, user_rects, rects_size);
+ if (unlikely(ret != 0)) {
+ DRM_ERROR("Failed to get rects.\n");
+ ret = -EFAULT;
+ goto out_free;
+ }
+
+ vmw_kms_ldu_update_layout(dev_priv, arg->num_outputs, rects);
+
+out_free:
+ kfree(rects);
+out_unlock:
+ ttm_read_unlock(&vmaster->lock);
+ return ret;
+}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
index 8b95249..8a398a0 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
@@ -94,9 +94,11 @@
int vmw_du_crtc_cursor_move(struct drm_crtc *crtc, int x, int y);
/*
- * Legacy display unit functions - vmwgfx_ldu.h
+ * Legacy display unit functions - vmwgfx_ldu.c
*/
int vmw_kms_init_legacy_display_system(struct vmw_private *dev_priv);
int vmw_kms_close_legacy_display_system(struct vmw_private *dev_priv);
+int vmw_kms_ldu_update_layout(struct vmw_private *dev_priv, unsigned num,
+ struct drm_vmw_rect *rects);
#endif
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
index 9089159..cfaf690 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
@@ -38,6 +38,7 @@
struct list_head active;
unsigned num_active;
+ unsigned last_num_active;
struct vmw_framebuffer *fb;
};
@@ -48,9 +49,12 @@
struct vmw_legacy_display_unit {
struct vmw_display_unit base;
- struct list_head active;
+ unsigned pref_width;
+ unsigned pref_height;
+ bool pref_active;
+ struct drm_display_mode *pref_mode;
- unsigned unit;
+ struct list_head active;
};
static void vmw_ldu_destroy(struct vmw_legacy_display_unit *ldu)
@@ -88,23 +92,44 @@
{
struct vmw_legacy_display *lds = dev_priv->ldu_priv;
struct vmw_legacy_display_unit *entry;
- struct drm_crtc *crtc;
+ struct drm_framebuffer *fb = NULL;
+ struct drm_crtc *crtc = NULL;
int i = 0;
- /* to stop the screen from changing size on resize */
- vmw_write(dev_priv, SVGA_REG_NUM_GUEST_DISPLAYS, 0);
- for (i = 0; i < lds->num_active; i++) {
- vmw_write(dev_priv, SVGA_REG_DISPLAY_ID, i);
- vmw_write(dev_priv, SVGA_REG_DISPLAY_IS_PRIMARY, !i);
- vmw_write(dev_priv, SVGA_REG_DISPLAY_POSITION_X, 0);
- vmw_write(dev_priv, SVGA_REG_DISPLAY_POSITION_Y, 0);
- vmw_write(dev_priv, SVGA_REG_DISPLAY_WIDTH, 0);
- vmw_write(dev_priv, SVGA_REG_DISPLAY_HEIGHT, 0);
- vmw_write(dev_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID);
+ /* If there is no display topology the host just assumes
+ * that the guest will set the same layout as the host.
+ */
+ if (!(dev_priv->capabilities & SVGA_CAP_DISPLAY_TOPOLOGY)) {
+ int w = 0, h = 0;
+ list_for_each_entry(entry, &lds->active, active) {
+ crtc = &entry->base.crtc;
+ w = max(w, crtc->x + crtc->mode.hdisplay);
+ h = max(h, crtc->y + crtc->mode.vdisplay);
+ i++;
+ }
+
+ if (crtc == NULL)
+ return 0;
+ fb = entry->base.crtc.fb;
+
+ vmw_kms_write_svga(dev_priv, w, h, fb->pitch,
+ fb->bits_per_pixel, fb->depth);
+
+ return 0;
}
- /* Now set the mode */
- vmw_write(dev_priv, SVGA_REG_NUM_GUEST_DISPLAYS, lds->num_active);
+ if (!list_empty(&lds->active)) {
+ entry = list_entry(lds->active.next, typeof(*entry), active);
+ fb = entry->base.crtc.fb;
+
+ vmw_kms_write_svga(dev_priv, fb->width, fb->height, fb->pitch,
+ fb->bits_per_pixel, fb->depth);
+ }
+
+ /* Make sure we always show something. */
+ vmw_write(dev_priv, SVGA_REG_NUM_GUEST_DISPLAYS,
+ lds->num_active ? lds->num_active : 1);
+
i = 0;
list_for_each_entry(entry, &lds->active, active) {
crtc = &entry->base.crtc;
@@ -120,6 +145,10 @@
i++;
}
+ BUG_ON(i != lds->num_active);
+
+ lds->last_num_active = lds->num_active;
+
return 0;
}
@@ -130,6 +159,7 @@
if (list_empty(&ldu->active))
return 0;
+ /* Must init otherwise list_empty(&ldu->active) will not work. */
list_del_init(&ldu->active);
if (--(ld->num_active) == 0) {
BUG_ON(!ld->fb);
@@ -149,24 +179,29 @@
struct vmw_legacy_display_unit *entry;
struct list_head *at;
+ BUG_ON(!ld->num_active && ld->fb);
+ if (vfb != ld->fb) {
+ if (ld->fb && ld->fb->unpin)
+ ld->fb->unpin(ld->fb);
+ if (vfb->pin)
+ vfb->pin(vfb);
+ ld->fb = vfb;
+ }
+
if (!list_empty(&ldu->active))
return 0;
at = &ld->active;
list_for_each_entry(entry, &ld->active, active) {
- if (entry->unit > ldu->unit)
+ if (entry->base.unit > ldu->base.unit)
break;
at = &entry->active;
}
list_add(&ldu->active, at);
- if (ld->num_active++ == 0) {
- BUG_ON(ld->fb);
- if (vfb->pin)
- vfb->pin(vfb);
- ld->fb = vfb;
- }
+
+ ld->num_active++;
return 0;
}
@@ -208,6 +243,8 @@
/* ldu only supports one fb active at the time */
if (dev_priv->ldu_priv->fb && vfb &&
+ !(dev_priv->ldu_priv->num_active == 1 &&
+ !list_empty(&ldu->active)) &&
dev_priv->ldu_priv->fb != vfb) {
DRM_ERROR("Multiple framebuffers not supported\n");
return -EINVAL;
@@ -300,8 +337,7 @@
static enum drm_connector_status
vmw_ldu_connector_detect(struct drm_connector *connector)
{
- /* XXX vmwctrl should control connection status */
- if (vmw_connector_to_ldu(connector)->base.unit == 0)
+ if (vmw_connector_to_ldu(connector)->pref_active)
return connector_status_connected;
return connector_status_disconnected;
}
@@ -312,10 +348,9 @@
752, 800, 0, 480, 489, 492, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 800x600@60Hz */
- { DRM_MODE("800x600",
- DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
- 40000, 800, 840, 968, 1056, 0, 600, 601, 605, 628,
- 0, DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+ { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840,
+ 968, 1056, 0, 600, 601, 605, 628, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 1024x768@60Hz */
{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048,
1184, 1344, 0, 768, 771, 777, 806, 0,
@@ -387,10 +422,34 @@
static int vmw_ldu_connector_fill_modes(struct drm_connector *connector,
uint32_t max_width, uint32_t max_height)
{
+ struct vmw_legacy_display_unit *ldu = vmw_connector_to_ldu(connector);
struct drm_device *dev = connector->dev;
struct drm_display_mode *mode = NULL;
+ struct drm_display_mode prefmode = { DRM_MODE("preferred",
+ DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC)
+ };
int i;
+ /* Add preferred mode */
+ {
+ mode = drm_mode_duplicate(dev, &prefmode);
+ if (!mode)
+ return 0;
+ mode->hdisplay = ldu->pref_width;
+ mode->vdisplay = ldu->pref_height;
+ mode->vrefresh = drm_mode_vrefresh(mode);
+ drm_mode_probed_add(connector, mode);
+
+ if (ldu->pref_mode) {
+ list_del_init(&ldu->pref_mode->head);
+ drm_mode_destroy(dev, ldu->pref_mode);
+ }
+
+ ldu->pref_mode = mode;
+ }
+
for (i = 0; vmw_ldu_connector_builtin[i].type != 0; i++) {
if (vmw_ldu_connector_builtin[i].hdisplay > max_width ||
vmw_ldu_connector_builtin[i].vdisplay > max_height)
@@ -443,18 +502,21 @@
if (!ldu)
return -ENOMEM;
- ldu->unit = unit;
+ ldu->base.unit = unit;
crtc = &ldu->base.crtc;
encoder = &ldu->base.encoder;
connector = &ldu->base.connector;
+ INIT_LIST_HEAD(&ldu->active);
+
+ ldu->pref_active = (unit == 0);
+ ldu->pref_width = 800;
+ ldu->pref_height = 600;
+ ldu->pref_mode = NULL;
+
drm_connector_init(dev, connector, &vmw_legacy_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
- /* Initial status */
- if (unit == 0)
- connector->status = connector_status_connected;
- else
- connector->status = connector_status_disconnected;
+ connector->status = vmw_ldu_connector_detect(connector);
drm_encoder_init(dev, encoder, &vmw_legacy_encoder_funcs,
DRM_MODE_ENCODER_LVDS);
@@ -462,8 +524,6 @@
encoder->possible_crtcs = (1 << unit);
encoder->possible_clones = 0;
- INIT_LIST_HEAD(&ldu->active);
-
drm_crtc_init(dev, crtc, &vmw_legacy_crtc_funcs);
drm_connector_attach_property(connector,
@@ -487,18 +547,22 @@
INIT_LIST_HEAD(&dev_priv->ldu_priv->active);
dev_priv->ldu_priv->num_active = 0;
+ dev_priv->ldu_priv->last_num_active = 0;
dev_priv->ldu_priv->fb = NULL;
drm_mode_create_dirty_info_property(dev_priv->dev);
vmw_ldu_init(dev_priv, 0);
- vmw_ldu_init(dev_priv, 1);
- vmw_ldu_init(dev_priv, 2);
- vmw_ldu_init(dev_priv, 3);
- vmw_ldu_init(dev_priv, 4);
- vmw_ldu_init(dev_priv, 5);
- vmw_ldu_init(dev_priv, 6);
- vmw_ldu_init(dev_priv, 7);
+ /* for old hardware without multimon only enable one display */
+ if (dev_priv->capabilities & SVGA_CAP_MULTIMON) {
+ vmw_ldu_init(dev_priv, 1);
+ vmw_ldu_init(dev_priv, 2);
+ vmw_ldu_init(dev_priv, 3);
+ vmw_ldu_init(dev_priv, 4);
+ vmw_ldu_init(dev_priv, 5);
+ vmw_ldu_init(dev_priv, 6);
+ vmw_ldu_init(dev_priv, 7);
+ }
return 0;
}
@@ -514,3 +578,42 @@
return 0;
}
+
+int vmw_kms_ldu_update_layout(struct vmw_private *dev_priv, unsigned num,
+ struct drm_vmw_rect *rects)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct vmw_legacy_display_unit *ldu;
+ struct drm_connector *con;
+ int i;
+
+ mutex_lock(&dev->mode_config.mutex);
+
+#if 0
+ DRM_INFO("%s: new layout ", __func__);
+ for (i = 0; i < (int)num; i++)
+ DRM_INFO("(%i, %i %ux%u) ", rects[i].x, rects[i].y,
+ rects[i].w, rects[i].h);
+ DRM_INFO("\n");
+#else
+ (void)i;
+#endif
+
+ list_for_each_entry(con, &dev->mode_config.connector_list, head) {
+ ldu = vmw_connector_to_ldu(con);
+ if (num > ldu->base.unit) {
+ ldu->pref_width = rects[ldu->base.unit].w;
+ ldu->pref_height = rects[ldu->base.unit].h;
+ ldu->pref_active = true;
+ } else {
+ ldu->pref_width = 800;
+ ldu->pref_height = 600;
+ ldu->pref_active = false;
+ }
+ con->status = vmw_ldu_connector_detect(con);
+ }
+
+ mutex_unlock(&dev->mode_config.mutex);
+
+ return 0;
+}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
index ad566c8..df2036e 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
@@ -358,6 +358,8 @@
if (stream->buf != buf)
stream->buf = vmw_dmabuf_reference(buf);
stream->saved = *arg;
+ /* stream is no longer stopped/paused */
+ stream->paused = false;
return 0;
}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
index f8fbbc6..8612378 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -597,8 +597,10 @@
ret = copy_from_user(srf->sizes, user_sizes,
srf->num_sizes * sizeof(*srf->sizes));
- if (unlikely(ret != 0))
+ if (unlikely(ret != 0)) {
+ ret = -EFAULT;
goto out_err1;
+ }
if (srf->scanout &&
srf->num_sizes == 1 &&
@@ -697,9 +699,11 @@
if (user_sizes)
ret = copy_to_user(user_sizes, srf->sizes,
srf->num_sizes * sizeof(*srf->sizes));
- if (unlikely(ret != 0))
+ if (unlikely(ret != 0)) {
DRM_ERROR("copy_to_user failed %p %u\n",
user_sizes, srf->num_sizes);
+ ret = -EFAULT;
+ }
out_bad_resource:
out_no_reference:
ttm_base_object_unref(&base);
diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
index 441e38c..b87569e 100644
--- a/drivers/gpu/vga/vgaarb.c
+++ b/drivers/gpu/vga/vgaarb.c
@@ -1,12 +1,32 @@
/*
- * vgaarb.c
+ * vgaarb.c: Implements the VGA arbitration. For details refer to
+ * Documentation/vgaarbiter.txt
+ *
*
* (C) Copyright 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
* (C) Copyright 2007 Paulo R. Zanoni <przanoni@gmail.com>
* (C) Copyright 2007, 2009 Tiago Vignatti <vignatti@freedesktop.org>
*
- * Implements the VGA arbitration. For details refer to
- * Documentation/vgaarbiter.txt
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS
+ * IN THE SOFTWARE.
+ *
*/
#include <linux/module.h>
@@ -155,8 +175,8 @@
(vgadev->decodes & VGA_RSRC_LEGACY_MEM))
rsrc |= VGA_RSRC_LEGACY_MEM;
- pr_devel("%s: %d\n", __func__, rsrc);
- pr_devel("%s: owns: %d\n", __func__, vgadev->owns);
+ pr_debug("%s: %d\n", __func__, rsrc);
+ pr_debug("%s: owns: %d\n", __func__, vgadev->owns);
/* Check what resources we need to acquire */
wants = rsrc & ~vgadev->owns;
@@ -268,7 +288,7 @@
{
unsigned int old_locks = vgadev->locks;
- pr_devel("%s\n", __func__);
+ pr_debug("%s\n", __func__);
/* Update our counters, and account for equivalent legacy resources
* if we decode them
@@ -575,6 +595,7 @@
else
vga_decode_count--;
}
+ pr_debug("vgaarb: decoding count now is: %d\n", vga_decode_count);
}
void __vga_set_legacy_decoding(struct pci_dev *pdev, unsigned int decodes, bool userspace)
@@ -831,7 +852,7 @@
curr_pos += 5;
remaining -= 5;
- pr_devel("client 0x%p called 'lock'\n", priv);
+ pr_debug("client 0x%p called 'lock'\n", priv);
if (!vga_str_to_iostate(curr_pos, remaining, &io_state)) {
ret_val = -EPROTO;
@@ -867,7 +888,7 @@
curr_pos += 7;
remaining -= 7;
- pr_devel("client 0x%p called 'unlock'\n", priv);
+ pr_debug("client 0x%p called 'unlock'\n", priv);
if (strncmp(curr_pos, "all", 3) == 0)
io_state = VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM;
@@ -917,7 +938,7 @@
curr_pos += 8;
remaining -= 8;
- pr_devel("client 0x%p called 'trylock'\n", priv);
+ pr_debug("client 0x%p called 'trylock'\n", priv);
if (!vga_str_to_iostate(curr_pos, remaining, &io_state)) {
ret_val = -EPROTO;
@@ -961,7 +982,7 @@
curr_pos += 7;
remaining -= 7;
- pr_devel("client 0x%p called 'target'\n", priv);
+ pr_debug("client 0x%p called 'target'\n", priv);
/* if target is default */
if (!strncmp(curr_pos, "default", 7))
pdev = pci_dev_get(vga_default_device());
@@ -971,11 +992,11 @@
ret_val = -EPROTO;
goto done;
}
- pr_devel("vgaarb: %s ==> %x:%x:%x.%x\n", curr_pos,
+ pr_debug("vgaarb: %s ==> %x:%x:%x.%x\n", curr_pos,
domain, bus, PCI_SLOT(devfn), PCI_FUNC(devfn));
pbus = pci_find_bus(domain, bus);
- pr_devel("vgaarb: pbus %p\n", pbus);
+ pr_debug("vgaarb: pbus %p\n", pbus);
if (pbus == NULL) {
pr_err("vgaarb: invalid PCI domain and/or bus address %x:%x\n",
domain, bus);
@@ -983,7 +1004,7 @@
goto done;
}
pdev = pci_get_slot(pbus, devfn);
- pr_devel("vgaarb: pdev %p\n", pdev);
+ pr_debug("vgaarb: pdev %p\n", pdev);
if (!pdev) {
pr_err("vgaarb: invalid PCI address %x:%x\n",
bus, devfn);
@@ -993,7 +1014,7 @@
}
vgadev = vgadev_find(pdev);
- pr_devel("vgaarb: vgadev %p\n", vgadev);
+ pr_debug("vgaarb: vgadev %p\n", vgadev);
if (vgadev == NULL) {
pr_err("vgaarb: this pci device is not a vga device\n");
pci_dev_put(pdev);
@@ -1029,7 +1050,7 @@
} else if (strncmp(curr_pos, "decodes ", 8) == 0) {
curr_pos += 8;
remaining -= 8;
- pr_devel("vgaarb: client 0x%p called 'decodes'\n", priv);
+ pr_debug("vgaarb: client 0x%p called 'decodes'\n", priv);
if (!vga_str_to_iostate(curr_pos, remaining, &io_state)) {
ret_val = -EPROTO;
@@ -1058,7 +1079,7 @@
{
struct vga_arb_private *priv = file->private_data;
- pr_devel("%s\n", __func__);
+ pr_debug("%s\n", __func__);
if (priv == NULL)
return -ENODEV;
@@ -1071,7 +1092,7 @@
struct vga_arb_private *priv;
unsigned long flags;
- pr_devel("%s\n", __func__);
+ pr_debug("%s\n", __func__);
priv = kmalloc(sizeof(struct vga_arb_private), GFP_KERNEL);
if (priv == NULL)
@@ -1101,7 +1122,7 @@
unsigned long flags;
int i;
- pr_devel("%s\n", __func__);
+ pr_debug("%s\n", __func__);
if (priv == NULL)
return -ENODEV;
@@ -1112,7 +1133,7 @@
uc = &priv->cards[i];
if (uc->pdev == NULL)
continue;
- pr_devel("uc->io_cnt == %d, uc->mem_cnt == %d\n",
+ pr_debug("uc->io_cnt == %d, uc->mem_cnt == %d\n",
uc->io_cnt, uc->mem_cnt);
while (uc->io_cnt--)
vga_put(uc->pdev, VGA_RSRC_LEGACY_IO);
@@ -1165,7 +1186,7 @@
struct pci_dev *pdev = to_pci_dev(dev);
bool notify = false;
- pr_devel("%s\n", __func__);
+ pr_debug("%s\n", __func__);
/* For now we're only intereted in devices added and removed. I didn't
* test this thing here, so someone needs to double check for the
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 76ba59b..4340993 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -347,9 +347,18 @@
---help---
Support for Quanta Optical Touch dual-touch panels.
+config HID_ROCCAT
+ tristate "Roccat special event support"
+ depends on USB_HID
+ ---help---
+ Support for Roccat special events.
+ Say Y here if you have a Roccat mouse or keyboard and want OSD or
+ macro execution support.
+
config HID_ROCCAT_KONE
tristate "Roccat Kone Mouse support"
depends on USB_HID
+ select HID_ROCCAT
---help---
Support for Roccat Kone mouse.
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 22e47eae..987fa06 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -48,6 +48,7 @@
obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o
obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o
obj-$(CONFIG_HID_PICOLCD) += hid-picolcd.o
+obj-$(CONFIG_HID_ROCCAT) += hid-roccat.o
obj-$(CONFIG_HID_ROCCAT_KONE) += hid-roccat-kone.o
obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o
obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index e10e314..866e54e 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1301,6 +1301,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0012) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
@@ -1336,6 +1337,24 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MONTEREY, USB_DEVICE_ID_GENIUS_KB29E) },
{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_1) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_2) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_3) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_4) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_5) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_6) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_7) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_8) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_9) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_10) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_11) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_12) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_13) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_14) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_15) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_16) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_17) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_18) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
@@ -1759,7 +1778,8 @@
/* we need to kill them here, otherwise they will stay allocated to
* wait for coming driver */
- if (!(hdev->quirks & HID_QUIRK_NO_IGNORE) && hid_ignore(hdev))
+ if (!(hdev->quirks & HID_QUIRK_NO_IGNORE)
+ && (hid_ignore(hdev) || (hdev->quirks & HID_QUIRK_IGNORE)))
return -ENODEV;
/* XXX hack, any other cleaner solution after the driver core
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index 56f314f..850d02a 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -811,7 +811,7 @@
[REL_WHEEL] = "Wheel", [REL_MISC] = "Misc",
};
-static const char *absolutes[ABS_MAX + 1] = {
+static const char *absolutes[ABS_CNT] = {
[ABS_X] = "X", [ABS_Y] = "Y",
[ABS_Z] = "Z", [ABS_RX] = "Rx",
[ABS_RY] = "Ry", [ABS_RZ] = "Rz",
@@ -949,8 +949,8 @@
int ret = 0, len;
DECLARE_WAITQUEUE(wait, current);
+ mutex_lock(&list->read_mutex);
while (ret == 0) {
- mutex_lock(&list->read_mutex);
if (list->head == list->tail) {
add_wait_queue(&list->hdev->debug_wait, &wait);
set_current_state(TASK_INTERRUPTIBLE);
diff --git a/drivers/hid/hid-gyration.c b/drivers/hid/hid-gyration.c
index 62416e6..3975e03 100644
--- a/drivers/hid/hid-gyration.c
+++ b/drivers/hid/hid-gyration.c
@@ -73,6 +73,7 @@
static const struct hid_device_id gyration_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_3) },
{ }
};
MODULE_DEVICE_TABLE(hid, gyration_devices);
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 9776896..31601ee 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -134,6 +134,7 @@
#define USB_VENDOR_ID_CH 0x068e
#define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2
#define USB_DEVICE_ID_CH_COMBATSTICK 0x00f4
+#define USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE 0x0051
#define USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE 0x00ff
#define USB_DEVICE_ID_CH_3AXIS_5BUTTON_STICK 0x00d3
@@ -282,6 +283,7 @@
#define USB_VENDOR_ID_GYRATION 0x0c16
#define USB_DEVICE_ID_GYRATION_REMOTE 0x0002
#define USB_DEVICE_ID_GYRATION_REMOTE_2 0x0003
+#define USB_DEVICE_ID_GYRATION_REMOTE_3 0x0008
#define USB_VENDOR_ID_HAPP 0x078b
#define USB_DEVICE_ID_UGCI_DRIVING 0x0010
@@ -368,6 +370,8 @@
#define USB_DEVICE_ID_MS_PRESENTER_8K_BT 0x0701
#define USB_DEVICE_ID_MS_PRESENTER_8K_USB 0x0713
+#define USB_VENDOR_ID_MOJO 0x8282
+#define USB_DEVICE_ID_RETRO_ADAPTER 0x3201
#define USB_VENDOR_ID_MONTEREY 0x0566
#define USB_DEVICE_ID_GENIUS_KB29E 0x3004
@@ -390,6 +394,24 @@
#define USB_VENDOR_ID_NTRIG 0x1b96
#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN 0x0001
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_1 0x0003
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_2 0x0004
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_3 0x0005
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_4 0x0006
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_5 0x0007
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_6 0x0008
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_7 0x0009
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_8 0x000A
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_9 0x000B
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_10 0x000C
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_11 0x000D
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_12 0x000E
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_13 0x000F
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_14 0x0010
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_15 0x0011
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_16 0x0012
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_17 0x0013
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_18 0x0014
#define USB_VENDOR_ID_ONTRAK 0x0a07
#define USB_DEVICE_ID_ONTRAK_ADU100 0x0064
diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c
index b6b0cae..fb69b8c 100644
--- a/drivers/hid/hid-ntrig.c
+++ b/drivers/hid/hid-ntrig.c
@@ -868,6 +868,42 @@
static const struct hid_device_id ntrig_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN),
.driver_data = NTRIG_DUPLICATE_USAGES },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_1),
+ .driver_data = NTRIG_DUPLICATE_USAGES },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_2),
+ .driver_data = NTRIG_DUPLICATE_USAGES },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_3),
+ .driver_data = NTRIG_DUPLICATE_USAGES },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_4),
+ .driver_data = NTRIG_DUPLICATE_USAGES },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_5),
+ .driver_data = NTRIG_DUPLICATE_USAGES },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_6),
+ .driver_data = NTRIG_DUPLICATE_USAGES },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_7),
+ .driver_data = NTRIG_DUPLICATE_USAGES },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_8),
+ .driver_data = NTRIG_DUPLICATE_USAGES },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_9),
+ .driver_data = NTRIG_DUPLICATE_USAGES },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_10),
+ .driver_data = NTRIG_DUPLICATE_USAGES },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_11),
+ .driver_data = NTRIG_DUPLICATE_USAGES },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_12),
+ .driver_data = NTRIG_DUPLICATE_USAGES },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_13),
+ .driver_data = NTRIG_DUPLICATE_USAGES },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_14),
+ .driver_data = NTRIG_DUPLICATE_USAGES },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_15),
+ .driver_data = NTRIG_DUPLICATE_USAGES },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_16),
+ .driver_data = NTRIG_DUPLICATE_USAGES },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_17),
+ .driver_data = NTRIG_DUPLICATE_USAGES },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_18),
+ .driver_data = NTRIG_DUPLICATE_USAGES },
{ }
};
MODULE_DEVICE_TABLE(hid, ntrig_devices);
diff --git a/drivers/hid/hid-roccat-kone.c b/drivers/hid/hid-roccat-kone.c
index 66e6940..17f2dc0 100644
--- a/drivers/hid/hid-roccat-kone.c
+++ b/drivers/hid/hid-roccat-kone.c
@@ -37,6 +37,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include "hid-ids.h"
+#include "hid-roccat.h"
#include "hid-roccat-kone.h"
static void kone_set_settings_checksum(struct kone_settings *settings)
@@ -263,7 +264,7 @@
return 0;
}
-static ssize_t kone_sysfs_read_settings(struct kobject *kobj,
+static ssize_t kone_sysfs_read_settings(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
struct device *dev = container_of(kobj, struct device, kobj);
@@ -287,7 +288,7 @@
* This function keeps values in kone_device up to date and assumes that in
* case of error the old data is still valid
*/
-static ssize_t kone_sysfs_write_settings(struct kobject *kobj,
+static ssize_t kone_sysfs_write_settings(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
struct device *dev = container_of(kobj, struct device, kobj);
@@ -342,31 +343,31 @@
return count;
}
-static ssize_t kone_sysfs_read_profile1(struct kobject *kobj,
+static ssize_t kone_sysfs_read_profile1(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 1);
}
-static ssize_t kone_sysfs_read_profile2(struct kobject *kobj,
+static ssize_t kone_sysfs_read_profile2(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 2);
}
-static ssize_t kone_sysfs_read_profile3(struct kobject *kobj,
+static ssize_t kone_sysfs_read_profile3(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 3);
}
-static ssize_t kone_sysfs_read_profile4(struct kobject *kobj,
+static ssize_t kone_sysfs_read_profile4(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 4);
}
-static ssize_t kone_sysfs_read_profile5(struct kobject *kobj,
+static ssize_t kone_sysfs_read_profile5(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 5);
@@ -404,31 +405,31 @@
return sizeof(struct kone_profile);
}
-static ssize_t kone_sysfs_write_profile1(struct kobject *kobj,
+static ssize_t kone_sysfs_write_profile1(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 1);
}
-static ssize_t kone_sysfs_write_profile2(struct kobject *kobj,
+static ssize_t kone_sysfs_write_profile2(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 2);
}
-static ssize_t kone_sysfs_write_profile3(struct kobject *kobj,
+static ssize_t kone_sysfs_write_profile3(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 3);
}
-static ssize_t kone_sysfs_write_profile4(struct kobject *kobj,
+static ssize_t kone_sysfs_write_profile4(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 4);
}
-static ssize_t kone_sysfs_write_profile5(struct kobject *kobj,
+static ssize_t kone_sysfs_write_profile5(struct file *fp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count) {
return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 5);
@@ -849,6 +850,16 @@
"couldn't init struct kone_device\n");
goto exit_free;
}
+
+ retval = roccat_connect(hdev);
+ if (retval < 0) {
+ dev_err(&hdev->dev, "couldn't init char dev\n");
+ /* be tolerant about not getting chrdev */
+ } else {
+ kone->roccat_claimed = 1;
+ kone->chrdev_minor = retval;
+ }
+
retval = kone_create_sysfs_attributes(intf);
if (retval) {
dev_err(&hdev->dev, "cannot create sysfs files\n");
@@ -868,10 +879,14 @@
static void kone_remove_specials(struct hid_device *hdev)
{
struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+ struct kone_device *kone;
if (intf->cur_altsetting->desc.bInterfaceProtocol
== USB_INTERFACE_PROTOCOL_MOUSE) {
kone_remove_sysfs_attributes(intf);
+ kone = hid_get_drvdata(hdev);
+ if (kone->roccat_claimed)
+ roccat_disconnect(kone->chrdev_minor);
kfree(hid_get_drvdata(hdev));
}
}
@@ -930,6 +945,37 @@
}
}
+static void kone_report_to_chrdev(struct kone_device const *kone,
+ struct kone_mouse_event const *event)
+{
+ struct kone_roccat_report roccat_report;
+
+ switch (event->event) {
+ case kone_mouse_event_switch_profile:
+ case kone_mouse_event_switch_dpi:
+ case kone_mouse_event_osd_profile:
+ case kone_mouse_event_osd_dpi:
+ roccat_report.event = event->event;
+ roccat_report.value = event->value;
+ roccat_report.key = 0;
+ roccat_report_event(kone->chrdev_minor,
+ (uint8_t *)&roccat_report,
+ sizeof(struct kone_roccat_report));
+ break;
+ case kone_mouse_event_call_overlong_macro:
+ if (event->value == kone_keystroke_action_press) {
+ roccat_report.event = kone_mouse_event_call_overlong_macro;
+ roccat_report.value = kone->actual_profile;
+ roccat_report.key = event->macro_key;
+ roccat_report_event(kone->chrdev_minor,
+ (uint8_t *)&roccat_report,
+ sizeof(struct kone_roccat_report));
+ }
+ break;
+ }
+
+}
+
/*
* Is called for keyboard- and mousepart.
* Only mousepart gets informations about special events in its extended event
@@ -958,6 +1004,9 @@
kone_keep_values_up_to_date(kone, event);
+ if (kone->roccat_claimed)
+ kone_report_to_chrdev(kone, event);
+
return 0; /* always do further processing */
}
diff --git a/drivers/hid/hid-roccat-kone.h b/drivers/hid/hid-roccat-kone.h
index b413b10..003e6f8 100644
--- a/drivers/hid/hid-roccat-kone.h
+++ b/drivers/hid/hid-roccat-kone.h
@@ -189,6 +189,12 @@
kone_command_firmware = 0xe5a
};
+struct kone_roccat_report {
+ uint8_t event;
+ uint8_t value; /* holds dpi or profile value */
+ uint8_t key; /* macro key on overlong macro execution */
+};
+
#pragma pack(pop)
struct kone_device {
@@ -219,6 +225,9 @@
* so it's read only once
*/
int firmware_version;
+
+ int roccat_claimed;
+ int chrdev_minor;
};
#endif
diff --git a/drivers/hid/hid-roccat.c b/drivers/hid/hid-roccat.c
new file mode 100644
index 0000000..e05d48e
--- /dev/null
+++ b/drivers/hid/hid-roccat.c
@@ -0,0 +1,428 @@
+/*
+ * Roccat driver for Linux
+ *
+ * Copyright (c) 2010 Stefan Achatz <erazor_de@users.sourceforge.net>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/*
+ * Module roccat is a char device used to report special events of roccat
+ * hardware to userland. These events include requests for on-screen-display of
+ * profile or dpi settings or requests for execution of macro sequences that are
+ * not stored in device. The information in these events depends on hid device
+ * implementation and contains data that is not available in a single hid event
+ * or else hidraw could have been used.
+ * It is inspired by hidraw, but uses only one circular buffer for all readers.
+ */
+
+#include <linux/cdev.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+
+#include "hid-roccat.h"
+
+#define ROCCAT_FIRST_MINOR 0
+#define ROCCAT_MAX_DEVICES 8
+
+/* should be a power of 2 for performance reason */
+#define ROCCAT_CBUF_SIZE 16
+
+struct roccat_report {
+ uint8_t *value;
+ int len;
+};
+
+struct roccat_device {
+ unsigned int minor;
+ int open;
+ int exist;
+ wait_queue_head_t wait;
+ struct device *dev;
+ struct hid_device *hid;
+ struct list_head readers;
+ /* protects modifications of readers list */
+ struct mutex readers_lock;
+
+ /*
+ * circular_buffer has one writer and multiple readers with their own
+ * read pointers
+ */
+ struct roccat_report cbuf[ROCCAT_CBUF_SIZE];
+ int cbuf_end;
+ struct mutex cbuf_lock;
+};
+
+struct roccat_reader {
+ struct list_head node;
+ struct roccat_device *device;
+ int cbuf_start;
+};
+
+static int roccat_major;
+static struct class *roccat_class;
+static struct cdev roccat_cdev;
+
+static struct roccat_device *devices[ROCCAT_MAX_DEVICES];
+/* protects modifications of devices array */
+static DEFINE_MUTEX(devices_lock);
+
+static ssize_t roccat_read(struct file *file, char __user *buffer,
+ size_t count, loff_t *ppos)
+{
+ struct roccat_reader *reader = file->private_data;
+ struct roccat_device *device = reader->device;
+ struct roccat_report *report;
+ ssize_t retval = 0, len;
+ DECLARE_WAITQUEUE(wait, current);
+
+ mutex_lock(&device->cbuf_lock);
+
+ /* no data? */
+ if (reader->cbuf_start == device->cbuf_end) {
+ add_wait_queue(&device->wait, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ /* wait for data */
+ while (reader->cbuf_start == device->cbuf_end) {
+ if (file->f_flags & O_NONBLOCK) {
+ retval = -EAGAIN;
+ break;
+ }
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+ if (!device->exist) {
+ retval = -EIO;
+ break;
+ }
+
+ mutex_unlock(&device->cbuf_lock);
+ schedule();
+ mutex_lock(&device->cbuf_lock);
+ set_current_state(TASK_INTERRUPTIBLE);
+ }
+
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&device->wait, &wait);
+ }
+
+ /* here we either have data or a reason to return if retval is set */
+ if (retval)
+ goto exit_unlock;
+
+ report = &device->cbuf[reader->cbuf_start];
+ /*
+ * If report is larger than requested amount of data, rest of report
+ * is lost!
+ */
+ len = report->len > count ? count : report->len;
+
+ if (copy_to_user(buffer, report->value, len)) {
+ retval = -EFAULT;
+ goto exit_unlock;
+ }
+ retval += len;
+ reader->cbuf_start = (reader->cbuf_start + 1) % ROCCAT_CBUF_SIZE;
+
+exit_unlock:
+ mutex_unlock(&device->cbuf_lock);
+ return retval;
+}
+
+static unsigned int roccat_poll(struct file *file, poll_table *wait)
+{
+ struct roccat_reader *reader = file->private_data;
+ poll_wait(file, &reader->device->wait, wait);
+ if (reader->cbuf_start != reader->device->cbuf_end)
+ return POLLIN | POLLRDNORM;
+ if (!reader->device->exist)
+ return POLLERR | POLLHUP;
+ return 0;
+}
+
+static int roccat_open(struct inode *inode, struct file *file)
+{
+ unsigned int minor = iminor(inode);
+ struct roccat_reader *reader;
+ struct roccat_device *device;
+ int error = 0;
+
+ reader = kzalloc(sizeof(struct roccat_reader), GFP_KERNEL);
+ if (!reader)
+ return -ENOMEM;
+
+ mutex_lock(&devices_lock);
+
+ device = devices[minor];
+
+ mutex_lock(&device->readers_lock);
+
+ if (!device) {
+ printk(KERN_EMERG "roccat device with minor %d doesn't exist\n",
+ minor);
+ error = -ENODEV;
+ goto exit_unlock;
+ }
+
+ if (!device->open++) {
+ /* power on device on adding first reader */
+ if (device->hid->ll_driver->power) {
+ error = device->hid->ll_driver->power(device->hid,
+ PM_HINT_FULLON);
+ if (error < 0) {
+ --device->open;
+ goto exit_unlock;
+ }
+ }
+ error = device->hid->ll_driver->open(device->hid);
+ if (error < 0) {
+ if (device->hid->ll_driver->power)
+ device->hid->ll_driver->power(device->hid,
+ PM_HINT_NORMAL);
+ --device->open;
+ goto exit_unlock;
+ }
+ }
+
+ reader->device = device;
+ /* new reader doesn't get old events */
+ reader->cbuf_start = device->cbuf_end;
+
+ list_add_tail(&reader->node, &device->readers);
+ file->private_data = reader;
+
+exit_unlock:
+ mutex_unlock(&device->readers_lock);
+ mutex_unlock(&devices_lock);
+ return error;
+}
+
+static int roccat_release(struct inode *inode, struct file *file)
+{
+ unsigned int minor = iminor(inode);
+ struct roccat_reader *reader = file->private_data;
+ struct roccat_device *device;
+
+ mutex_lock(&devices_lock);
+
+ device = devices[minor];
+ if (!device) {
+ mutex_unlock(&devices_lock);
+ printk(KERN_EMERG "roccat device with minor %d doesn't exist\n",
+ minor);
+ return -ENODEV;
+ }
+
+ mutex_lock(&device->readers_lock);
+ list_del(&reader->node);
+ mutex_unlock(&device->readers_lock);
+ kfree(reader);
+
+ if (!--device->open) {
+ /* removing last reader */
+ if (device->exist) {
+ if (device->hid->ll_driver->power)
+ device->hid->ll_driver->power(device->hid,
+ PM_HINT_NORMAL);
+ device->hid->ll_driver->close(device->hid);
+ } else {
+ kfree(device);
+ }
+ }
+
+ mutex_unlock(&devices_lock);
+
+ return 0;
+}
+
+/*
+ * roccat_report_event() - output data to readers
+ * @minor: minor device number returned by roccat_connect()
+ * @data: pointer to data
+ * @len: size of data
+ *
+ * Return value is zero on success, a negative error code on failure.
+ *
+ * This is called from interrupt handler.
+ */
+int roccat_report_event(int minor, u8 const *data, int len)
+{
+ struct roccat_device *device;
+ struct roccat_reader *reader;
+ struct roccat_report *report;
+ uint8_t *new_value;
+
+ new_value = kmemdup(data, len, GFP_ATOMIC);
+ if (!new_value)
+ return -ENOMEM;
+
+ device = devices[minor];
+
+ report = &device->cbuf[device->cbuf_end];
+
+ /* passing NULL is safe */
+ kfree(report->value);
+
+ report->value = new_value;
+ report->len = len;
+ device->cbuf_end = (device->cbuf_end + 1) % ROCCAT_CBUF_SIZE;
+
+ list_for_each_entry(reader, &device->readers, node) {
+ /*
+ * As we already inserted one element, the buffer can't be
+ * empty. If start and end are equal, buffer is full and we
+ * increase start, so that slow reader misses one event, but
+ * gets the newer ones in the right order.
+ */
+ if (reader->cbuf_start == device->cbuf_end)
+ reader->cbuf_start = (reader->cbuf_start + 1) % ROCCAT_CBUF_SIZE;
+ }
+
+ wake_up_interruptible(&device->wait);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(roccat_report_event);
+
+/*
+ * roccat_connect() - create a char device for special event output
+ * @hid: the hid device the char device should be connected to.
+ *
+ * Return value is minor device number in Range [0, ROCCAT_MAX_DEVICES] on
+ * success, a negative error code on failure.
+ */
+int roccat_connect(struct hid_device *hid)
+{
+ unsigned int minor;
+ struct roccat_device *device;
+ int temp;
+
+ device = kzalloc(sizeof(struct roccat_device), GFP_KERNEL);
+ if (!device)
+ return -ENOMEM;
+
+ mutex_lock(&devices_lock);
+
+ for (minor = 0; minor < ROCCAT_MAX_DEVICES; ++minor) {
+ if (devices[minor])
+ continue;
+ break;
+ }
+
+ if (minor < ROCCAT_MAX_DEVICES) {
+ devices[minor] = device;
+ } else {
+ mutex_unlock(&devices_lock);
+ kfree(device);
+ return -EINVAL;
+ }
+
+ device->dev = device_create(roccat_class, &hid->dev,
+ MKDEV(roccat_major, minor), NULL,
+ "%s%s%d", "roccat", hid->driver->name, minor);
+
+ if (IS_ERR(device->dev)) {
+ devices[minor] = NULL;
+ mutex_unlock(&devices_lock);
+ temp = PTR_ERR(device->dev);
+ kfree(device);
+ return temp;
+ }
+
+ mutex_unlock(&devices_lock);
+
+ init_waitqueue_head(&device->wait);
+ INIT_LIST_HEAD(&device->readers);
+ mutex_init(&device->readers_lock);
+ mutex_init(&device->cbuf_lock);
+ device->minor = minor;
+ device->hid = hid;
+ device->exist = 1;
+ device->cbuf_end = 0;
+
+ return minor;
+}
+EXPORT_SYMBOL_GPL(roccat_connect);
+
+/* roccat_disconnect() - remove char device from hid device
+ * @minor: the minor device number returned by roccat_connect()
+ */
+void roccat_disconnect(int minor)
+{
+ struct roccat_device *device;
+
+ mutex_lock(&devices_lock);
+ device = devices[minor];
+ devices[minor] = NULL;
+ mutex_unlock(&devices_lock);
+
+ device->exist = 0; /* TODO exist maybe not needed */
+
+ device_destroy(roccat_class, MKDEV(roccat_major, minor));
+
+ if (device->open) {
+ device->hid->ll_driver->close(device->hid);
+ wake_up_interruptible(&device->wait);
+ } else {
+ kfree(device);
+ }
+}
+EXPORT_SYMBOL_GPL(roccat_disconnect);
+
+static const struct file_operations roccat_ops = {
+ .owner = THIS_MODULE,
+ .read = roccat_read,
+ .poll = roccat_poll,
+ .open = roccat_open,
+ .release = roccat_release,
+};
+
+static int __init roccat_init(void)
+{
+ int retval;
+ dev_t dev_id;
+
+ retval = alloc_chrdev_region(&dev_id, ROCCAT_FIRST_MINOR,
+ ROCCAT_MAX_DEVICES, "roccat");
+
+ roccat_major = MAJOR(dev_id);
+
+ if (retval < 0) {
+ printk(KERN_WARNING "roccat: can't get major number\n");
+ return retval;
+ }
+
+ roccat_class = class_create(THIS_MODULE, "roccat");
+ if (IS_ERR(roccat_class)) {
+ retval = PTR_ERR(roccat_class);
+ unregister_chrdev_region(dev_id, ROCCAT_MAX_DEVICES);
+ return retval;
+ }
+
+ cdev_init(&roccat_cdev, &roccat_ops);
+ cdev_add(&roccat_cdev, dev_id, ROCCAT_MAX_DEVICES);
+
+ return 0;
+}
+
+static void __exit roccat_exit(void)
+{
+ dev_t dev_id = MKDEV(roccat_major, 0);
+
+ cdev_del(&roccat_cdev);
+ class_destroy(roccat_class);
+ unregister_chrdev_region(dev_id, ROCCAT_MAX_DEVICES);
+}
+
+module_init(roccat_init);
+module_exit(roccat_exit);
+
+MODULE_AUTHOR("Stefan Achatz");
+MODULE_DESCRIPTION("USB Roccat char device");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/hid/hid-roccat.h b/drivers/hid/hid-roccat.h
new file mode 100644
index 0000000..d8aae0c
--- /dev/null
+++ b/drivers/hid/hid-roccat.h
@@ -0,0 +1,31 @@
+#ifndef __HID_ROCCAT_H
+#define __HID_ROCCAT_H
+
+/*
+ * Copyright (c) 2010 Stefan Achatz <erazor_de@users.sourceforge.net>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/hid.h>
+#include <linux/types.h>
+
+#if defined(CONFIG_HID_ROCCAT) || defined (CONFIG_HID_ROCCAT_MODULE)
+int roccat_connect(struct hid_device *hid);
+void roccat_disconnect(int minor);
+int roccat_report_event(int minor, u8 const *data, int len);
+#else
+static inline int roccat_connect(struct hid_device *hid) { return -1; }
+static inline void roccat_disconnect(int minor) {}
+static inline int roccat_report_event(int minor, u8 const *data, int len)
+{
+ return 0;
+}
+#endif
+
+#endif
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 1ebd324..b729c02 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -827,14 +827,21 @@
ret++;
}
} else {
+ int skipped_report_id = 0;
+ if (buf[0] == 0x0) {
+ /* Don't send the Report ID */
+ buf++;
+ count--;
+ skipped_report_id = 1;
+ }
ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
HID_REQ_SET_REPORT,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
((report_type + 1) << 8) | *buf,
- interface->desc.bInterfaceNumber, buf + 1, count - 1,
+ interface->desc.bInterfaceNumber, buf, count,
USB_CTRL_SET_TIMEOUT);
- /* count also the report id */
- if (ret > 0)
+ /* count also the report id, if this was a numbered report. */
+ if (ret > 0 && skipped_report_id)
ret++;
}
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 5ff8d32..5f5aa39 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -34,6 +34,7 @@
{ USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH, HID_QUIRK_MULTI_INPUT },
+ { USB_VENDOR_ID_MOJO, USB_DEVICE_ID_RETRO_ADAPTER, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
@@ -56,6 +57,7 @@
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_PRO_PEDALS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_3AXIS_5BUTTON_STICK, HID_QUIRK_NOGET },
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 6a9ac75..e19cf8e 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -447,13 +447,14 @@
will be called it87.
config SENSORS_LM63
- tristate "National Semiconductor LM63"
+ tristate "National Semiconductor LM63 and LM64"
depends on I2C
help
- If you say yes here you get support for the National Semiconductor
- LM63 remote diode digital temperature sensor with integrated fan
- control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
- motherboard, among others.
+ If you say yes here you get support for the National
+ Semiconductor LM63 and LM64 remote diode digital temperature
+ sensors with integrated fan control. Such chips are found
+ on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
+ others.
This driver can also be built as a module. If so, the module
will be called lm63.
@@ -492,7 +493,8 @@
- NXP's LM75A
- ST Microelectronics STDS75
- TelCom (now Microchip) TCN75
- - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275
+ - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
+ TMP275
This driver supports driver model based binding through board
specific I2C device tables.
@@ -749,6 +751,16 @@
This driver can also be built as a module. If so, the module
will be called dme1737.
+config SENSORS_EMC1403
+ tristate "SMSC EMC1403 thermal sensor"
+ depends on I2C
+ help
+ If you say yes here you get support for the SMSC EMC1403
+ temperature monitoring chip.
+
+ Threshold values can be configured using sysfs.
+ Data from the different diodes are accessible via sysfs.
+
config SENSORS_SMSC47M1
tristate "SMSC LPC47M10x and compatibles"
help
@@ -831,6 +843,16 @@
This driver can also be built as a module. If so, the module
will be called thmc50.
+config SENSORS_TMP102
+ tristate "Texas Instruments TMP102"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for Texas Instruments TMP102
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called tmp102.
+
config SENSORS_TMP401
tristate "Texas Instruments TMP401 and compatibles"
depends on I2C && EXPERIMENTAL
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 86920fb..2138ceb 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -41,6 +41,7 @@
obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
obj-$(CONFIG_SENSORS_DME1737) += dme1737.o
obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
+obj-$(CONFIG_SENSORS_EMC1403) += emc1403.o
obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
obj-$(CONFIG_SENSORS_F71882FG) += f71882fg.o
obj-$(CONFIG_SENSORS_F75375S) += f75375s.o
@@ -90,6 +91,7 @@
obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
obj-$(CONFIG_SENSORS_AMC6821) += amc6821.o
obj-$(CONFIG_SENSORS_THMC50) += thmc50.o
+obj-$(CONFIG_SENSORS_TMP102) += tmp102.o
obj-$(CONFIG_SENSORS_TMP401) += tmp401.o
obj-$(CONFIG_SENSORS_TMP421) += tmp421.o
obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index 1644b92..15c1a96 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -36,6 +36,7 @@
#define ADM1031_REG_FAN_DIV(nr) (0x20 + (nr))
#define ADM1031_REG_PWM (0x22)
#define ADM1031_REG_FAN_MIN(nr) (0x10 + (nr))
+#define ADM1031_REG_FAN_FILTER (0x23)
#define ADM1031_REG_TEMP_OFFSET(nr) (0x0d + (nr))
#define ADM1031_REG_TEMP_MAX(nr) (0x14 + 4 * (nr))
@@ -61,6 +62,9 @@
#define ADM1031_CONF2_TACH2_ENABLE 0x08
#define ADM1031_CONF2_TEMP_ENABLE(chan) (0x10 << (chan))
+#define ADM1031_UPDATE_RATE_MASK 0x1c
+#define ADM1031_UPDATE_RATE_SHIFT 2
+
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
@@ -75,6 +79,7 @@
int chip_type;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
+ unsigned int update_rate; /* In milliseconds */
/* The chan_select_table contains the possible configurations for
* auto fan control.
*/
@@ -738,6 +743,57 @@
static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 13);
static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 14);
+/* Update Rate */
+static const unsigned int update_rates[] = {
+ 16000, 8000, 4000, 2000, 1000, 500, 250, 125,
+};
+
+static ssize_t show_update_rate(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adm1031_data *data = i2c_get_clientdata(client);
+
+ return sprintf(buf, "%u\n", data->update_rate);
+}
+
+static ssize_t set_update_rate(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adm1031_data *data = i2c_get_clientdata(client);
+ unsigned long val;
+ int i, err;
+ u8 reg;
+
+ err = strict_strtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ /* find the nearest update rate from the table */
+ for (i = 0; i < ARRAY_SIZE(update_rates) - 1; i++) {
+ if (val >= update_rates[i])
+ break;
+ }
+ /* if not found, we point to the last entry (lowest update rate) */
+
+ /* set the new update rate while preserving other settings */
+ reg = adm1031_read_value(client, ADM1031_REG_FAN_FILTER);
+ reg &= ~ADM1031_UPDATE_RATE_MASK;
+ reg |= i << ADM1031_UPDATE_RATE_SHIFT;
+ adm1031_write_value(client, ADM1031_REG_FAN_FILTER, reg);
+
+ mutex_lock(&data->update_lock);
+ data->update_rate = update_rates[i];
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static DEVICE_ATTR(update_rate, S_IRUGO | S_IWUSR, show_update_rate,
+ set_update_rate);
+
static struct attribute *adm1031_attributes[] = {
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan1_div.dev_attr.attr,
@@ -774,6 +830,7 @@
&sensor_dev_attr_auto_fan1_min_pwm.dev_attr.attr,
+ &dev_attr_update_rate.attr,
&dev_attr_alarms.attr,
NULL
@@ -900,6 +957,7 @@
{
unsigned int read_val;
unsigned int mask;
+ int i;
struct adm1031_data *data = i2c_get_clientdata(client);
mask = (ADM1031_CONF2_PWM1_ENABLE | ADM1031_CONF2_TACH1_ENABLE);
@@ -919,18 +977,24 @@
ADM1031_CONF1_MONITOR_ENABLE);
}
+ /* Read the chip's update rate */
+ mask = ADM1031_UPDATE_RATE_MASK;
+ read_val = adm1031_read_value(client, ADM1031_REG_FAN_FILTER);
+ i = (read_val & mask) >> ADM1031_UPDATE_RATE_SHIFT;
+ data->update_rate = update_rates[i];
}
static struct adm1031_data *adm1031_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct adm1031_data *data = i2c_get_clientdata(client);
+ unsigned long next_update;
int chan;
mutex_lock(&data->update_lock);
- if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
- || !data->valid) {
+ next_update = data->last_updated + msecs_to_jiffies(data->update_rate);
+ if (time_after(jiffies, next_update) || !data->valid) {
dev_dbg(&client->dev, "Starting adm1031 update\n");
for (chan = 0;
diff --git a/drivers/hwmon/adt7411.c b/drivers/hwmon/adt7411.c
index 4086c72..f13c843 100644
--- a/drivers/hwmon/adt7411.c
+++ b/drivers/hwmon/adt7411.c
@@ -316,7 +316,6 @@
exit_remove:
sysfs_remove_group(&client->dev.kobj, &adt7411_attr_grp);
exit_free:
- i2c_set_clientdata(client, NULL);
kfree(data);
return ret;
}
@@ -327,7 +326,6 @@
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &adt7411_attr_grp);
- i2c_set_clientdata(client, NULL);
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index f085c18..b6598aa 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -148,6 +148,20 @@
/* Set 18: MacBook Pro 2,2 */
{ "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "TM0P", "TTF0",
"Th0H", "Th1H", "Tm0P", "Ts0P", NULL },
+/* Set 19: Macbook Pro 5,3 */
+ { "TB0T", "TB1T", "TB2T", "TB3T", "TC0D", "TC0F", "TC0P", "TG0D",
+ "TG0F", "TG0H", "TG0P", "TG0T", "TN0D", "TN0P", "TTF0", "Th2H",
+ "Tm0P", "Ts0P", "Ts0S", NULL },
+/* Set 20: MacBook Pro 5,4 */
+ { "TB0T", "TB1T", "TB2T", "TB3T", "TC0D", "TC0F", "TC0P", "TN0D",
+ "TN0P", "TTF0", "Th2H", "Ts0P", "Ts0S", NULL },
+/* Set 21: MacBook Pro 6,2 */
+ { "TB0T", "TB1T", "TB2T", "TC0C", "TC0D", "TC0P", "TC1C", "TG0D",
+ "TG0P", "TG0T", "TMCD", "TP0P", "TPCD", "Th1H", "Th2H", "Tm0P",
+ "Ts0P", "Ts0S", NULL },
+/* Set 22: MacBook Pro 7,1 */
+ { "TB0T", "TB1T", "TB2T", "TC0D", "TC0P", "TN0D", "TN0P", "TN0S",
+ "TN1D", "TN1F", "TN1G", "TN1S", "Th1H", "Ts0P", "Ts0S", NULL },
};
/* List of keys used to read/write fan speeds */
@@ -646,6 +660,17 @@
return snprintf(sysfsbuf, PAGE_SIZE, "(%d,%d)\n", left, right);
}
+/* Displays sensor key as label */
+static ssize_t applesmc_show_sensor_label(struct device *dev,
+ struct device_attribute *devattr, char *sysfsbuf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ const char *key =
+ temperature_sensors_sets[applesmc_temperature_set][attr->index];
+
+ return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", key);
+}
+
/* Displays degree Celsius * 1000 */
static ssize_t applesmc_show_temperature(struct device *dev,
struct device_attribute *devattr, char *sysfsbuf)
@@ -1113,6 +1138,86 @@
/*
* Temperature sensors sysfs entries.
*/
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp5_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp6_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 5);
+static SENSOR_DEVICE_ATTR(temp7_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp8_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 7);
+static SENSOR_DEVICE_ATTR(temp9_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 8);
+static SENSOR_DEVICE_ATTR(temp10_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 9);
+static SENSOR_DEVICE_ATTR(temp11_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 10);
+static SENSOR_DEVICE_ATTR(temp12_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 11);
+static SENSOR_DEVICE_ATTR(temp13_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 12);
+static SENSOR_DEVICE_ATTR(temp14_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 13);
+static SENSOR_DEVICE_ATTR(temp15_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 14);
+static SENSOR_DEVICE_ATTR(temp16_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 15);
+static SENSOR_DEVICE_ATTR(temp17_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 16);
+static SENSOR_DEVICE_ATTR(temp18_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 17);
+static SENSOR_DEVICE_ATTR(temp19_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 18);
+static SENSOR_DEVICE_ATTR(temp20_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 19);
+static SENSOR_DEVICE_ATTR(temp21_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 20);
+static SENSOR_DEVICE_ATTR(temp22_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 21);
+static SENSOR_DEVICE_ATTR(temp23_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 22);
+static SENSOR_DEVICE_ATTR(temp24_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 23);
+static SENSOR_DEVICE_ATTR(temp25_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 24);
+static SENSOR_DEVICE_ATTR(temp26_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 25);
+static SENSOR_DEVICE_ATTR(temp27_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 26);
+static SENSOR_DEVICE_ATTR(temp28_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 27);
+static SENSOR_DEVICE_ATTR(temp29_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 28);
+static SENSOR_DEVICE_ATTR(temp30_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 29);
+static SENSOR_DEVICE_ATTR(temp31_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 30);
+static SENSOR_DEVICE_ATTR(temp32_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 31);
+static SENSOR_DEVICE_ATTR(temp33_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 32);
+static SENSOR_DEVICE_ATTR(temp34_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 33);
+static SENSOR_DEVICE_ATTR(temp35_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 34);
+static SENSOR_DEVICE_ATTR(temp36_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 35);
+static SENSOR_DEVICE_ATTR(temp37_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 36);
+static SENSOR_DEVICE_ATTR(temp38_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 37);
+static SENSOR_DEVICE_ATTR(temp39_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 38);
+static SENSOR_DEVICE_ATTR(temp40_label, S_IRUGO,
+ applesmc_show_sensor_label, NULL, 39);
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
applesmc_show_temperature, NULL, 0);
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO,
@@ -1194,6 +1299,50 @@
static SENSOR_DEVICE_ATTR(temp40_input, S_IRUGO,
applesmc_show_temperature, NULL, 39);
+static struct attribute *label_attributes[] = {
+ &sensor_dev_attr_temp1_label.dev_attr.attr,
+ &sensor_dev_attr_temp2_label.dev_attr.attr,
+ &sensor_dev_attr_temp3_label.dev_attr.attr,
+ &sensor_dev_attr_temp4_label.dev_attr.attr,
+ &sensor_dev_attr_temp5_label.dev_attr.attr,
+ &sensor_dev_attr_temp6_label.dev_attr.attr,
+ &sensor_dev_attr_temp7_label.dev_attr.attr,
+ &sensor_dev_attr_temp8_label.dev_attr.attr,
+ &sensor_dev_attr_temp9_label.dev_attr.attr,
+ &sensor_dev_attr_temp10_label.dev_attr.attr,
+ &sensor_dev_attr_temp11_label.dev_attr.attr,
+ &sensor_dev_attr_temp12_label.dev_attr.attr,
+ &sensor_dev_attr_temp13_label.dev_attr.attr,
+ &sensor_dev_attr_temp14_label.dev_attr.attr,
+ &sensor_dev_attr_temp15_label.dev_attr.attr,
+ &sensor_dev_attr_temp16_label.dev_attr.attr,
+ &sensor_dev_attr_temp17_label.dev_attr.attr,
+ &sensor_dev_attr_temp18_label.dev_attr.attr,
+ &sensor_dev_attr_temp19_label.dev_attr.attr,
+ &sensor_dev_attr_temp20_label.dev_attr.attr,
+ &sensor_dev_attr_temp21_label.dev_attr.attr,
+ &sensor_dev_attr_temp22_label.dev_attr.attr,
+ &sensor_dev_attr_temp23_label.dev_attr.attr,
+ &sensor_dev_attr_temp24_label.dev_attr.attr,
+ &sensor_dev_attr_temp25_label.dev_attr.attr,
+ &sensor_dev_attr_temp26_label.dev_attr.attr,
+ &sensor_dev_attr_temp27_label.dev_attr.attr,
+ &sensor_dev_attr_temp28_label.dev_attr.attr,
+ &sensor_dev_attr_temp29_label.dev_attr.attr,
+ &sensor_dev_attr_temp30_label.dev_attr.attr,
+ &sensor_dev_attr_temp31_label.dev_attr.attr,
+ &sensor_dev_attr_temp32_label.dev_attr.attr,
+ &sensor_dev_attr_temp33_label.dev_attr.attr,
+ &sensor_dev_attr_temp34_label.dev_attr.attr,
+ &sensor_dev_attr_temp35_label.dev_attr.attr,
+ &sensor_dev_attr_temp36_label.dev_attr.attr,
+ &sensor_dev_attr_temp37_label.dev_attr.attr,
+ &sensor_dev_attr_temp38_label.dev_attr.attr,
+ &sensor_dev_attr_temp39_label.dev_attr.attr,
+ &sensor_dev_attr_temp40_label.dev_attr.attr,
+ NULL
+};
+
static struct attribute *temperature_attributes[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp2_input.dev_attr.attr,
@@ -1241,6 +1390,10 @@
static const struct attribute_group temperature_attributes_group =
{ .attrs = temperature_attributes };
+static const struct attribute_group label_attributes_group = {
+ .attrs = label_attributes
+};
+
/* Module stuff */
/*
@@ -1363,6 +1516,14 @@
{ .accelerometer = 0, .light = 0, .temperature_set = 17 },
/* MacBook Pro 2,2: accelerometer, backlight and temperature set 18 */
{ .accelerometer = 1, .light = 1, .temperature_set = 18 },
+/* MacBook Pro 5,3: accelerometer, backlight and temperature set 19 */
+ { .accelerometer = 1, .light = 1, .temperature_set = 19 },
+/* MacBook Pro 5,4: accelerometer, backlight and temperature set 20 */
+ { .accelerometer = 1, .light = 1, .temperature_set = 20 },
+/* MacBook Pro 6,2: accelerometer, backlight and temperature set 21 */
+ { .accelerometer = 1, .light = 1, .temperature_set = 21 },
+/* MacBook Pro 7,1: accelerometer, backlight and temperature set 22 */
+ { .accelerometer = 1, .light = 1, .temperature_set = 22 },
};
/* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
@@ -1376,6 +1537,22 @@
DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir") },
&applesmc_dmi_data[7]},
+ { applesmc_dmi_match, "Apple MacBook Pro 7", {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro7") },
+ &applesmc_dmi_data[22]},
+ { applesmc_dmi_match, "Apple MacBook Pro 5,4", {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,4") },
+ &applesmc_dmi_data[20]},
+ { applesmc_dmi_match, "Apple MacBook Pro 5,3", {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,3") },
+ &applesmc_dmi_data[19]},
+ { applesmc_dmi_match, "Apple MacBook Pro 6", {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro6") },
+ &applesmc_dmi_data[21]},
{ applesmc_dmi_match, "Apple MacBook Pro 5", {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5") },
@@ -1518,7 +1695,8 @@
for (i = 0;
temperature_sensors_sets[applesmc_temperature_set][i] != NULL;
i++) {
- if (temperature_attributes[i] == NULL) {
+ if (temperature_attributes[i] == NULL ||
+ label_attributes[i] == NULL) {
printk(KERN_ERR "applesmc: More temperature sensors "
"in temperature_sensors_sets (at least %i)"
"than available sysfs files in "
@@ -1530,6 +1708,10 @@
temperature_attributes[i]);
if (ret)
goto out_temperature;
+ ret = sysfs_create_file(&pdev->dev.kobj,
+ label_attributes[i]);
+ if (ret)
+ goto out_temperature;
}
if (applesmc_accelerometer) {
@@ -1580,6 +1762,7 @@
if (applesmc_accelerometer)
applesmc_release_accelerometer();
out_temperature:
+ sysfs_remove_group(&pdev->dev.kobj, &label_attributes_group);
sysfs_remove_group(&pdev->dev.kobj, &temperature_attributes_group);
out_fans:
while (fans_handled)
@@ -1609,6 +1792,7 @@
}
if (applesmc_accelerometer)
applesmc_release_accelerometer();
+ sysfs_remove_group(&pdev->dev.kobj, &label_attributes_group);
sysfs_remove_group(&pdev->dev.kobj, &temperature_attributes_group);
while (fans_handled)
sysfs_remove_group(&pdev->dev.kobj,
diff --git a/drivers/hwmon/asc7621.c b/drivers/hwmon/asc7621.c
index 0f388ad..3b973f3 100644
--- a/drivers/hwmon/asc7621.c
+++ b/drivers/hwmon/asc7621.c
@@ -1141,7 +1141,6 @@
&(asc7621_params[i].sda.dev_attr));
}
- i2c_set_clientdata(client, NULL);
kfree(data);
return err;
}
@@ -1196,7 +1195,6 @@
&(asc7621_params[i].sda.dev_attr));
}
- i2c_set_clientdata(client, NULL);
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index 16c4202..653db1b 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -1411,6 +1411,13 @@
{
int ret;
+ /* Make sure it's safe to access the device through ACPI */
+ if (!acpi_resources_are_enforced()) {
+ pr_err("atk: Resources not safely usable due to "
+ "acpi_enforce_resources kernel parameter\n");
+ return -EBUSY;
+ }
+
ret = acpi_bus_register_driver(&atk_driver);
if (ret)
pr_info("atk: acpi_bus_register_driver failed: %d\n", ret);
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 2988da1..05344af 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -53,6 +53,7 @@
struct mutex update_lock;
const char *name;
u32 id;
+ u16 core_id;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
int temp;
@@ -75,7 +76,7 @@
if (attr->index == SHOW_NAME)
ret = sprintf(buf, "%s\n", data->name);
else /* show label */
- ret = sprintf(buf, "Core %d\n", data->id);
+ ret = sprintf(buf, "Core %d\n", data->core_id);
return ret;
}
@@ -304,6 +305,9 @@
}
data->id = pdev->id;
+#ifdef CONFIG_SMP
+ data->core_id = c->cpu_core_id;
+#endif
data->name = "coretemp";
mutex_init(&data->update_lock);
@@ -405,6 +409,10 @@
struct list_head list;
struct platform_device *pdev;
unsigned int cpu;
+#ifdef CONFIG_SMP
+ u16 phys_proc_id;
+ u16 cpu_core_id;
+#endif
};
static LIST_HEAD(pdev_list);
@@ -415,6 +423,22 @@
int err;
struct platform_device *pdev;
struct pdev_entry *pdev_entry;
+#ifdef CONFIG_SMP
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
+#endif
+
+ mutex_lock(&pdev_list_mutex);
+
+#ifdef CONFIG_SMP
+ /* Skip second HT entry of each core */
+ list_for_each_entry(pdev_entry, &pdev_list, list) {
+ if (c->phys_proc_id == pdev_entry->phys_proc_id &&
+ c->cpu_core_id == pdev_entry->cpu_core_id) {
+ err = 0; /* Not an error */
+ goto exit;
+ }
+ }
+#endif
pdev = platform_device_alloc(DRVNAME, cpu);
if (!pdev) {
@@ -438,7 +462,10 @@
pdev_entry->pdev = pdev;
pdev_entry->cpu = cpu;
- mutex_lock(&pdev_list_mutex);
+#ifdef CONFIG_SMP
+ pdev_entry->phys_proc_id = c->phys_proc_id;
+ pdev_entry->cpu_core_id = c->cpu_core_id;
+#endif
list_add_tail(&pdev_entry->list, &pdev_list);
mutex_unlock(&pdev_list_mutex);
@@ -449,6 +476,7 @@
exit_device_put:
platform_device_put(pdev);
exit:
+ mutex_unlock(&pdev_list_mutex);
return err;
}
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index 823dd28..980c17d 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -1,12 +1,14 @@
/*
- * dme1737.c - Driver for the SMSC DME1737, Asus A8000, SMSC SCH311x and
- * SCH5027 Super-I/O chips integrated hardware monitoring features.
- * Copyright (c) 2007, 2008 Juerg Haefliger <juergh@gmail.com>
+ * dme1737.c - Driver for the SMSC DME1737, Asus A8000, SMSC SCH311x, SCH5027,
+ * and SCH5127 Super-I/O chips integrated hardware monitoring
+ * features.
+ * Copyright (c) 2007, 2008, 2009, 2010 Juerg Haefliger <juergh@gmail.com>
*
* This driver is an I2C/ISA hybrid, meaning that it uses the I2C bus to access
* the chip registers if a DME1737, A8000, or SCH5027 is found and the ISA bus
- * if a SCH311x chip is found. Both types of chips have very similar hardware
- * monitoring capabilities but differ in the way they can be accessed.
+ * if a SCH311x or SCH5127 chip is found. Both types of chips have very
+ * similar hardware monitoring capabilities but differ in the way they can be
+ * accessed.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -57,7 +59,7 @@
/* Addresses to scan */
static const unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END};
-enum chips { dme1737, sch5027, sch311x };
+enum chips { dme1737, sch5027, sch311x, sch5127 };
/* ---------------------------------------------------------------------
* Registers
@@ -164,10 +166,29 @@
#define DME1737_VERSTEP_MASK 0xf8
#define SCH311X_DEVICE 0x8c
#define SCH5027_VERSTEP 0x69
+#define SCH5127_DEVICE 0x8e
+
+/* Device ID values (global configuration register index 0x20) */
+#define DME1737_ID_1 0x77
+#define DME1737_ID_2 0x78
+#define SCH3112_ID 0x7c
+#define SCH3114_ID 0x7d
+#define SCH3116_ID 0x7f
+#define SCH5027_ID 0x89
+#define SCH5127_ID 0x86
/* Length of ISA address segment */
#define DME1737_EXTENT 2
+/* chip-dependent features */
+#define HAS_TEMP_OFFSET (1 << 0) /* bit 0 */
+#define HAS_VID (1 << 1) /* bit 1 */
+#define HAS_ZONE3 (1 << 2) /* bit 2 */
+#define HAS_ZONE_HYST (1 << 3) /* bit 3 */
+#define HAS_PWM_MIN (1 << 4) /* bit 4 */
+#define HAS_FAN(ix) (1 << ((ix) + 5)) /* bits 5-10 */
+#define HAS_PWM(ix) (1 << ((ix) + 11)) /* bits 11-16 */
+
/* ---------------------------------------------------------------------
* Data structures and manipulation thereof
* --------------------------------------------------------------------- */
@@ -187,8 +208,7 @@
u8 vid;
u8 pwm_rr_en;
- u8 has_pwm;
- u8 has_fan;
+ u32 has_features;
/* Register values */
u16 in[7];
@@ -224,8 +244,11 @@
3300};
static const int IN_NOMINAL_SCH5027[] = {5000, 2250, 3300, 1125, 1125, 3300,
3300};
+static const int IN_NOMINAL_SCH5127[] = {2500, 2250, 3300, 1125, 1125, 3300,
+ 3300};
#define IN_NOMINAL(type) ((type) == sch311x ? IN_NOMINAL_SCH311x : \
(type) == sch5027 ? IN_NOMINAL_SCH5027 : \
+ (type) == sch5127 ? IN_NOMINAL_SCH5127 : \
IN_NOMINAL_DME1737)
/* Voltage input
@@ -568,7 +591,7 @@
/* Sample register contents every 1 sec */
if (time_after(jiffies, data->last_update + HZ) || !data->valid) {
- if (data->type == dme1737) {
+ if (data->has_features & HAS_VID) {
data->vid = dme1737_read(data, DME1737_REG_VID) &
0x3f;
}
@@ -599,7 +622,7 @@
DME1737_REG_TEMP_MIN(ix));
data->temp_max[ix] = dme1737_read(data,
DME1737_REG_TEMP_MAX(ix));
- if (data->type != sch5027) {
+ if (data->has_features & HAS_TEMP_OFFSET) {
data->temp_offset[ix] = dme1737_read(data,
DME1737_REG_TEMP_OFFSET(ix));
}
@@ -626,7 +649,7 @@
for (ix = 0; ix < ARRAY_SIZE(data->fan); ix++) {
/* Skip reading registers if optional fans are not
* present */
- if (!(data->has_fan & (1 << ix))) {
+ if (!(data->has_features & HAS_FAN(ix))) {
continue;
}
data->fan[ix] = dme1737_read(data,
@@ -650,7 +673,7 @@
for (ix = 0; ix < ARRAY_SIZE(data->pwm); ix++) {
/* Skip reading registers if optional PWMs are not
* present */
- if (!(data->has_pwm & (1 << ix))) {
+ if (!(data->has_features & HAS_PWM(ix))) {
continue;
}
data->pwm[ix] = dme1737_read(data,
@@ -672,12 +695,24 @@
/* Thermal zone registers */
for (ix = 0; ix < ARRAY_SIZE(data->zone_low); ix++) {
- data->zone_low[ix] = dme1737_read(data,
- DME1737_REG_ZONE_LOW(ix));
- data->zone_abs[ix] = dme1737_read(data,
- DME1737_REG_ZONE_ABS(ix));
+ /* Skip reading registers if zone3 is not present */
+ if ((ix == 2) && !(data->has_features & HAS_ZONE3)) {
+ continue;
+ }
+ /* sch5127 zone2 registers are special */
+ if ((ix == 1) && (data->type == sch5127)) {
+ data->zone_low[1] = dme1737_read(data,
+ DME1737_REG_ZONE_LOW(2));
+ data->zone_abs[1] = dme1737_read(data,
+ DME1737_REG_ZONE_ABS(2));
+ } else {
+ data->zone_low[ix] = dme1737_read(data,
+ DME1737_REG_ZONE_LOW(ix));
+ data->zone_abs[ix] = dme1737_read(data,
+ DME1737_REG_ZONE_ABS(ix));
+ }
}
- if (data->type != sch5027) {
+ if (data->has_features & HAS_ZONE_HYST) {
for (ix = 0; ix < ARRAY_SIZE(data->zone_hyst); ix++) {
data->zone_hyst[ix] = dme1737_read(data,
DME1737_REG_ZONE_HYST(ix));
@@ -1594,10 +1629,6 @@
&sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr,
&sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr,
&sensor_dev_attr_zone2_auto_channels_temp.dev_attr.attr,
- &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr,
- &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr,
- &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr,
- &sensor_dev_attr_zone3_auto_channels_temp.dev_attr.attr,
NULL
};
@@ -1605,27 +1636,23 @@
.attrs = dme1737_attr,
};
-/* The following struct holds misc attributes, which are not available in all
- * chips. Their creation depends on the chip type which is determined during
- * module load. */
-static struct attribute *dme1737_misc_attr[] = {
- /* Temperatures */
+/* The following struct holds temp offset attributes, which are not available
+ * in all chips. The following chips support them:
+ * DME1737, SCH311x */
+static struct attribute *dme1737_temp_offset_attr[] = {
&sensor_dev_attr_temp1_offset.dev_attr.attr,
&sensor_dev_attr_temp2_offset.dev_attr.attr,
&sensor_dev_attr_temp3_offset.dev_attr.attr,
- /* Zones */
- &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr,
- &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr,
- &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr,
NULL
};
-static const struct attribute_group dme1737_misc_group = {
- .attrs = dme1737_misc_attr,
+static const struct attribute_group dme1737_temp_offset_group = {
+ .attrs = dme1737_temp_offset_attr,
};
-/* The following struct holds VID-related attributes. Their creation
- depends on the chip type which is determined during module load. */
+/* The following struct holds VID related attributes, which are not available
+ * in all chips. The following chips support them:
+ * DME1737 */
static struct attribute *dme1737_vid_attr[] = {
&dev_attr_vrm.attr,
&dev_attr_cpu0_vid.attr,
@@ -1636,6 +1663,36 @@
.attrs = dme1737_vid_attr,
};
+/* The following struct holds temp zone 3 related attributes, which are not
+ * available in all chips. The following chips support them:
+ * DME1737, SCH311x, SCH5027 */
+static struct attribute *dme1737_zone3_attr[] = {
+ &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr,
+ &sensor_dev_attr_zone3_auto_channels_temp.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group dme1737_zone3_group = {
+ .attrs = dme1737_zone3_attr,
+};
+
+
+/* The following struct holds temp zone hysteresis related attributes, which
+ * are not available in all chips. The following chips support them:
+ * DME1737, SCH311x */
+static struct attribute *dme1737_zone_hyst_attr[] = {
+ &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr,
+ &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr,
+ &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group dme1737_zone_hyst_group = {
+ .attrs = dme1737_zone_hyst_attr,
+};
+
/* The following structs hold the PWM attributes, some of which are optional.
* Their creation depends on the chip configuration which is determined during
* module load. */
@@ -1691,10 +1748,10 @@
{ .attrs = dme1737_pwm6_attr },
};
-/* The following struct holds misc PWM attributes, which are not available in
- * all chips. Their creation depends on the chip type which is determined
+/* The following struct holds auto PWM min attributes, which are not available
+ * in all chips. Their creation depends on the chip type which is determined
* during module load. */
-static struct attribute *dme1737_pwm_misc_attr[] = {
+static struct attribute *dme1737_auto_pwm_min_attr[] = {
&sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr,
&sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr,
@@ -1764,14 +1821,25 @@
&sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr,
&sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr,
&sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group dme1737_zone_chmod_group = {
+ .attrs = dme1737_zone_chmod_attr,
+};
+
+
+/* The permissions of the following zone 3 attributes are changed to read-
+ * writeable if the chip is *not* locked. Otherwise they stay read-only. */
+static struct attribute *dme1737_zone3_chmod_attr[] = {
&sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr,
&sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr,
&sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr,
NULL
};
-static const struct attribute_group dme1737_zone_chmod_group = {
- .attrs = dme1737_zone_chmod_attr,
+static const struct attribute_group dme1737_zone3_chmod_group = {
+ .attrs = dme1737_zone3_chmod_attr,
};
/* The permissions of the following PWM attributes are changed to read-
@@ -1887,30 +1955,35 @@
int ix;
for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
- if (data->has_fan & (1 << ix)) {
+ if (data->has_features & HAS_FAN(ix)) {
sysfs_remove_group(&dev->kobj,
&dme1737_fan_group[ix]);
}
}
for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
- if (data->has_pwm & (1 << ix)) {
+ if (data->has_features & HAS_PWM(ix)) {
sysfs_remove_group(&dev->kobj,
&dme1737_pwm_group[ix]);
- if (data->type != sch5027 && ix < 3) {
+ if ((data->has_features & HAS_PWM_MIN) && ix < 3) {
sysfs_remove_file(&dev->kobj,
- dme1737_pwm_misc_attr[ix]);
+ dme1737_auto_pwm_min_attr[ix]);
}
}
}
- if (data->type != sch5027) {
- sysfs_remove_group(&dev->kobj, &dme1737_misc_group);
+ if (data->has_features & HAS_TEMP_OFFSET) {
+ sysfs_remove_group(&dev->kobj, &dme1737_temp_offset_group);
}
- if (data->type == dme1737) {
+ if (data->has_features & HAS_VID) {
sysfs_remove_group(&dev->kobj, &dme1737_vid_group);
}
-
+ if (data->has_features & HAS_ZONE3) {
+ sysfs_remove_group(&dev->kobj, &dme1737_zone3_group);
+ }
+ if (data->has_features & HAS_ZONE_HYST) {
+ sysfs_remove_group(&dev->kobj, &dme1737_zone_hyst_group);
+ }
sysfs_remove_group(&dev->kobj, &dme1737_group);
if (!data->client) {
@@ -1934,23 +2007,31 @@
goto exit_remove;
}
- /* Create misc sysfs attributes */
- if ((data->type != sch5027) &&
+ /* Create chip-dependent sysfs attributes */
+ if ((data->has_features & HAS_TEMP_OFFSET) &&
(err = sysfs_create_group(&dev->kobj,
- &dme1737_misc_group))) {
+ &dme1737_temp_offset_group))) {
goto exit_remove;
}
-
- /* Create VID-related sysfs attributes */
- if ((data->type == dme1737) &&
+ if ((data->has_features & HAS_VID) &&
(err = sysfs_create_group(&dev->kobj,
&dme1737_vid_group))) {
goto exit_remove;
}
+ if ((data->has_features & HAS_ZONE3) &&
+ (err = sysfs_create_group(&dev->kobj,
+ &dme1737_zone3_group))) {
+ goto exit_remove;
+ }
+ if ((data->has_features & HAS_ZONE_HYST) &&
+ (err = sysfs_create_group(&dev->kobj,
+ &dme1737_zone_hyst_group))) {
+ goto exit_remove;
+ }
/* Create fan sysfs attributes */
for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
- if (data->has_fan & (1 << ix)) {
+ if (data->has_features & HAS_FAN(ix)) {
if ((err = sysfs_create_group(&dev->kobj,
&dme1737_fan_group[ix]))) {
goto exit_remove;
@@ -1960,14 +2041,14 @@
/* Create PWM sysfs attributes */
for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
- if (data->has_pwm & (1 << ix)) {
+ if (data->has_features & HAS_PWM(ix)) {
if ((err = sysfs_create_group(&dev->kobj,
&dme1737_pwm_group[ix]))) {
goto exit_remove;
}
- if (data->type != sch5027 && ix < 3 &&
+ if ((data->has_features & HAS_PWM_MIN) && ix < 3 &&
(err = sysfs_create_file(&dev->kobj,
- dme1737_pwm_misc_attr[ix]))) {
+ dme1737_auto_pwm_min_attr[ix]))) {
goto exit_remove;
}
}
@@ -1983,21 +2064,30 @@
dme1737_chmod_group(dev, &dme1737_zone_chmod_group,
S_IRUGO | S_IWUSR);
- /* Change permissions of misc sysfs attributes */
- if (data->type != sch5027) {
- dme1737_chmod_group(dev, &dme1737_misc_group,
+ /* Change permissions of chip-dependent sysfs attributes */
+ if (data->has_features & HAS_TEMP_OFFSET) {
+ dme1737_chmod_group(dev, &dme1737_temp_offset_group,
+ S_IRUGO | S_IWUSR);
+ }
+ if (data->has_features & HAS_ZONE3) {
+ dme1737_chmod_group(dev, &dme1737_zone3_chmod_group,
+ S_IRUGO | S_IWUSR);
+ }
+ if (data->has_features & HAS_ZONE_HYST) {
+ dme1737_chmod_group(dev, &dme1737_zone_hyst_group,
S_IRUGO | S_IWUSR);
}
/* Change permissions of PWM sysfs attributes */
for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_chmod_group); ix++) {
- if (data->has_pwm & (1 << ix)) {
+ if (data->has_features & HAS_PWM(ix)) {
dme1737_chmod_group(dev,
&dme1737_pwm_chmod_group[ix],
S_IRUGO | S_IWUSR);
- if (data->type != sch5027 && ix < 3) {
+ if ((data->has_features & HAS_PWM_MIN) &&
+ ix < 3) {
dme1737_chmod_file(dev,
- dme1737_pwm_misc_attr[ix],
+ dme1737_auto_pwm_min_attr[ix],
S_IRUGO | S_IWUSR);
}
}
@@ -2005,7 +2095,7 @@
/* Change permissions of pwm[1-3] if in manual mode */
for (ix = 0; ix < 3; ix++) {
- if ((data->has_pwm & (1 << ix)) &&
+ if ((data->has_features & HAS_PWM(ix)) &&
(PWM_EN_FROM_REG(data->pwm_config[ix]) == 1)) {
dme1737_chmod_file(dev,
dme1737_pwm_chmod_attr[ix],
@@ -2052,20 +2142,20 @@
return -EFAULT;
}
- /* Determine which optional fan and pwm features are enabled/present */
+ /* Determine which optional fan and pwm features are enabled (only
+ * valid for I2C devices) */
if (client) { /* I2C chip */
data->config2 = dme1737_read(data, DME1737_REG_CONFIG2);
/* Check if optional fan3 input is enabled */
if (data->config2 & 0x04) {
- data->has_fan |= (1 << 2);
+ data->has_features |= HAS_FAN(2);
}
/* Fan4 and pwm3 are only available if the client's I2C address
* is the default 0x2e. Otherwise the I/Os associated with
* these functions are used for addr enable/select. */
if (client->addr == 0x2e) {
- data->has_fan |= (1 << 3);
- data->has_pwm |= (1 << 2);
+ data->has_features |= HAS_FAN(3) | HAS_PWM(2);
}
/* Determine which of the optional fan[5-6] and pwm[5-6]
@@ -2077,26 +2167,40 @@
dev_warn(dev, "Failed to query Super-IO for optional "
"features.\n");
}
- } else { /* ISA chip */
- /* Fan3 and pwm3 are always available. Fan[4-5] and pwm[5-6]
- * don't exist in the ISA chip. */
- data->has_fan |= (1 << 2);
- data->has_pwm |= (1 << 2);
}
- /* Fan1, fan2, pwm1, and pwm2 are always present */
- data->has_fan |= 0x03;
- data->has_pwm |= 0x03;
+ /* Fan[1-2] and pwm[1-2] are present in all chips */
+ data->has_features |= HAS_FAN(0) | HAS_FAN(1) | HAS_PWM(0) | HAS_PWM(1);
+
+ /* Chip-dependent features */
+ switch (data->type) {
+ case dme1737:
+ data->has_features |= HAS_TEMP_OFFSET | HAS_VID | HAS_ZONE3 |
+ HAS_ZONE_HYST | HAS_PWM_MIN;
+ break;
+ case sch311x:
+ data->has_features |= HAS_TEMP_OFFSET | HAS_ZONE3 |
+ HAS_ZONE_HYST | HAS_PWM_MIN | HAS_FAN(2) | HAS_PWM(2);
+ break;
+ case sch5027:
+ data->has_features |= HAS_ZONE3;
+ break;
+ case sch5127:
+ data->has_features |= HAS_FAN(2) | HAS_PWM(2);
+ break;
+ default:
+ break;
+ }
dev_info(dev, "Optional features: pwm3=%s, pwm5=%s, pwm6=%s, "
"fan3=%s, fan4=%s, fan5=%s, fan6=%s.\n",
- (data->has_pwm & (1 << 2)) ? "yes" : "no",
- (data->has_pwm & (1 << 4)) ? "yes" : "no",
- (data->has_pwm & (1 << 5)) ? "yes" : "no",
- (data->has_fan & (1 << 2)) ? "yes" : "no",
- (data->has_fan & (1 << 3)) ? "yes" : "no",
- (data->has_fan & (1 << 4)) ? "yes" : "no",
- (data->has_fan & (1 << 5)) ? "yes" : "no");
+ (data->has_features & HAS_PWM(2)) ? "yes" : "no",
+ (data->has_features & HAS_PWM(4)) ? "yes" : "no",
+ (data->has_features & HAS_PWM(5)) ? "yes" : "no",
+ (data->has_features & HAS_FAN(2)) ? "yes" : "no",
+ (data->has_features & HAS_FAN(3)) ? "yes" : "no",
+ (data->has_features & HAS_FAN(4)) ? "yes" : "no",
+ (data->has_features & HAS_FAN(5)) ? "yes" : "no");
reg = dme1737_read(data, DME1737_REG_TACH_PWM);
/* Inform if fan-to-pwm mapping differs from the default */
@@ -2122,7 +2226,7 @@
for (ix = 0; ix < 3; ix++) {
data->pwm_config[ix] = dme1737_read(data,
DME1737_REG_PWM_CONFIG(ix));
- if ((data->has_pwm & (1 << ix)) &&
+ if ((data->has_features & HAS_PWM(ix)) &&
(PWM_EN_FROM_REG(data->pwm_config[ix]) == -1)) {
dev_info(dev, "Switching pwm%d to "
"manual mode.\n", ix + 1);
@@ -2142,7 +2246,7 @@
data->pwm_acz[2] = 4; /* pwm3 -> zone3 */
/* Set VRM */
- if (data->type == dme1737) {
+ if (data->has_features & HAS_VID) {
data->vrm = vid_which_vrm();
}
@@ -2163,10 +2267,10 @@
dme1737_sio_enter(sio_cip);
/* Check device ID
- * The DME1737 can return either 0x78 or 0x77 as its device ID.
- * The SCH5027 returns 0x89 as its device ID. */
+ * We currently know about two kinds of DME1737 and SCH5027. */
reg = force_id ? force_id : dme1737_sio_inb(sio_cip, 0x20);
- if (!(reg == 0x77 || reg == 0x78 || reg == 0x89)) {
+ if (!(reg == DME1737_ID_1 || reg == DME1737_ID_2 ||
+ reg == SCH5027_ID)) {
err = -ENODEV;
goto exit;
}
@@ -2185,16 +2289,16 @@
* are enabled and available. Bits [3:2] of registers 0x43-0x46 are set
* to '10' if the respective feature is enabled. */
if ((inb(addr + 0x43) & 0x0c) == 0x08) { /* fan6 */
- data->has_fan |= (1 << 5);
+ data->has_features |= HAS_FAN(5);
}
if ((inb(addr + 0x44) & 0x0c) == 0x08) { /* pwm6 */
- data->has_pwm |= (1 << 5);
+ data->has_features |= HAS_PWM(5);
}
if ((inb(addr + 0x45) & 0x0c) == 0x08) { /* fan5 */
- data->has_fan |= (1 << 4);
+ data->has_features |= HAS_FAN(4);
}
if ((inb(addr + 0x46) & 0x0c) == 0x08) { /* pwm5 */
- data->has_pwm |= (1 << 4);
+ data->has_features |= HAS_PWM(4);
}
exit:
@@ -2222,7 +2326,6 @@
if (company == DME1737_COMPANY_SMSC &&
verstep == SCH5027_VERSTEP) {
name = "sch5027";
-
} else if (company == DME1737_COMPANY_SMSC &&
(verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP) {
name = "dme1737";
@@ -2329,10 +2432,10 @@
dme1737_sio_enter(sio_cip);
/* Check device ID
- * We currently know about SCH3112 (0x7c), SCH3114 (0x7d), and
- * SCH3116 (0x7f). */
+ * We currently know about SCH3112, SCH3114, SCH3116, and SCH5127 */
reg = force_id ? force_id : dme1737_sio_inb(sio_cip, 0x20);
- if (!(reg == 0x7c || reg == 0x7d || reg == 0x7f)) {
+ if (!(reg == SCH3112_ID || reg == SCH3114_ID || reg == SCH3116_ID ||
+ reg == SCH5127_ID)) {
err = -ENODEV;
goto exit;
}
@@ -2424,23 +2527,42 @@
platform_set_drvdata(pdev, data);
/* Skip chip detection if module is loaded with force_id parameter */
- if (!force_id) {
+ switch (force_id) {
+ case SCH3112_ID:
+ case SCH3114_ID:
+ case SCH3116_ID:
+ data->type = sch311x;
+ break;
+ case SCH5127_ID:
+ data->type = sch5127;
+ break;
+ default:
company = dme1737_read(data, DME1737_REG_COMPANY);
device = dme1737_read(data, DME1737_REG_DEVICE);
- if (!((company == DME1737_COMPANY_SMSC) &&
- (device == SCH311X_DEVICE))) {
+ if ((company == DME1737_COMPANY_SMSC) &&
+ (device == SCH311X_DEVICE)) {
+ data->type = sch311x;
+ } else if ((company == DME1737_COMPANY_SMSC) &&
+ (device == SCH5127_DEVICE)) {
+ data->type = sch5127;
+ } else {
err = -ENODEV;
goto exit_kfree;
}
}
- data->type = sch311x;
- /* Fill in the remaining client fields and initialize the mutex */
- data->name = "sch311x";
+ if (data->type == sch5127) {
+ data->name = "sch5127";
+ } else {
+ data->name = "sch311x";
+ }
+
+ /* Initialize the mutex */
mutex_init(&data->update_lock);
- dev_info(dev, "Found a SCH311x chip at 0x%04x\n", data->addr);
+ dev_info(dev, "Found a %s chip at 0x%04x\n",
+ data->type == sch5127 ? "SCH5127" : "SCH311x", data->addr);
/* Initialize the chip */
if ((err = dme1737_init_device(dev))) {
diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c
new file mode 100644
index 0000000..0e4b564
--- /dev/null
+++ b/drivers/hwmon/emc1403.c
@@ -0,0 +1,344 @@
+/*
+ * emc1403.c - SMSC Thermal Driver
+ *
+ * Copyright (C) 2008 Intel Corp
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * TODO
+ * - cache alarm and critical limit registers
+ * - add emc1404 support
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/mutex.h>
+
+#define THERMAL_PID_REG 0xfd
+#define THERMAL_SMSC_ID_REG 0xfe
+#define THERMAL_REVISION_REG 0xff
+
+struct thermal_data {
+ struct device *hwmon_dev;
+ struct mutex mutex;
+ /* Cache the hyst value so we don't keep re-reading it. In theory
+ we could cache it forever as nobody else should be writing it. */
+ u8 cached_hyst;
+ unsigned long hyst_valid;
+};
+
+static ssize_t show_temp(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
+ int retval = i2c_smbus_read_byte_data(client, sda->index);
+
+ if (retval < 0)
+ return retval;
+ return sprintf(buf, "%d000\n", retval);
+}
+
+static ssize_t show_bit(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct sensor_device_attribute_2 *sda = to_sensor_dev_attr_2(attr);
+ int retval = i2c_smbus_read_byte_data(client, sda->nr);
+
+ if (retval < 0)
+ return retval;
+ retval &= sda->index;
+ return sprintf(buf, "%d\n", retval ? 1 : 0);
+}
+
+static ssize_t store_temp(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
+ struct i2c_client *client = to_i2c_client(dev);
+ unsigned long val;
+ int retval;
+
+ if (strict_strtoul(buf, 10, &val))
+ return -EINVAL;
+ retval = i2c_smbus_write_byte_data(client, sda->index,
+ DIV_ROUND_CLOSEST(val, 1000));
+ if (retval < 0)
+ return retval;
+ return count;
+}
+
+static ssize_t show_hyst(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct thermal_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
+ int retval;
+ int hyst;
+
+ retval = i2c_smbus_read_byte_data(client, sda->index);
+ if (retval < 0)
+ return retval;
+
+ if (time_after(jiffies, data->hyst_valid)) {
+ hyst = i2c_smbus_read_byte_data(client, 0x21);
+ if (hyst < 0)
+ return retval;
+ data->cached_hyst = hyst;
+ data->hyst_valid = jiffies + HZ;
+ }
+ return sprintf(buf, "%d000\n", retval - data->cached_hyst);
+}
+
+static ssize_t store_hyst(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct thermal_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
+ int retval;
+ int hyst;
+ unsigned long val;
+
+ if (strict_strtoul(buf, 10, &val))
+ return -EINVAL;
+
+ mutex_lock(&data->mutex);
+ retval = i2c_smbus_read_byte_data(client, sda->index);
+ if (retval < 0)
+ goto fail;
+
+ hyst = val - retval * 1000;
+ hyst = DIV_ROUND_CLOSEST(hyst, 1000);
+ if (hyst < 0 || hyst > 255) {
+ retval = -ERANGE;
+ goto fail;
+ }
+
+ retval = i2c_smbus_write_byte_data(client, 0x21, hyst);
+ if (retval == 0) {
+ retval = count;
+ data->cached_hyst = hyst;
+ data->hyst_valid = jiffies + HZ;
+ }
+fail:
+ mutex_unlock(&data->mutex);
+ return retval;
+}
+
+/*
+ * Sensors. We pass the actual i2c register to the methods.
+ */
+
+static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR,
+ show_temp, store_temp, 0x06);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
+ show_temp, store_temp, 0x05);
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO | S_IWUSR,
+ show_temp, store_temp, 0x20);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0x00);
+static SENSOR_DEVICE_ATTR_2(temp1_min_alarm, S_IRUGO,
+ show_bit, NULL, 0x36, 0x01);
+static SENSOR_DEVICE_ATTR_2(temp1_max_alarm, S_IRUGO,
+ show_bit, NULL, 0x35, 0x01);
+static SENSOR_DEVICE_ATTR_2(temp1_crit_alarm, S_IRUGO,
+ show_bit, NULL, 0x37, 0x01);
+static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO | S_IWUSR,
+ show_hyst, store_hyst, 0x20);
+
+static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR,
+ show_temp, store_temp, 0x08);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR,
+ show_temp, store_temp, 0x07);
+static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO | S_IWUSR,
+ show_temp, store_temp, 0x19);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 0x01);
+static SENSOR_DEVICE_ATTR_2(temp2_min_alarm, S_IRUGO,
+ show_bit, NULL, 0x36, 0x02);
+static SENSOR_DEVICE_ATTR_2(temp2_max_alarm, S_IRUGO,
+ show_bit, NULL, 0x35, 0x02);
+static SENSOR_DEVICE_ATTR_2(temp2_crit_alarm, S_IRUGO,
+ show_bit, NULL, 0x37, 0x02);
+static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO | S_IWUSR,
+ show_hyst, store_hyst, 0x19);
+
+static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO | S_IWUSR,
+ show_temp, store_temp, 0x16);
+static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO | S_IWUSR,
+ show_temp, store_temp, 0x15);
+static SENSOR_DEVICE_ATTR(temp3_crit, S_IRUGO | S_IWUSR,
+ show_temp, store_temp, 0x1A);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 0x23);
+static SENSOR_DEVICE_ATTR_2(temp3_min_alarm, S_IRUGO,
+ show_bit, NULL, 0x36, 0x04);
+static SENSOR_DEVICE_ATTR_2(temp3_max_alarm, S_IRUGO,
+ show_bit, NULL, 0x35, 0x04);
+static SENSOR_DEVICE_ATTR_2(temp3_crit_alarm, S_IRUGO,
+ show_bit, NULL, 0x37, 0x04);
+static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO | S_IWUSR,
+ show_hyst, store_hyst, 0x1A);
+
+static struct attribute *mid_att_thermal[] = {
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit.dev_attr.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp3_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit.dev_attr.attr,
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group m_thermal_gr = {
+ .attrs = mid_att_thermal
+};
+
+static int emc1403_detect(struct i2c_client *client,
+ struct i2c_board_info *info)
+{
+ int id;
+ /* Check if thermal chip is SMSC and EMC1403 */
+
+ id = i2c_smbus_read_byte_data(client, THERMAL_SMSC_ID_REG);
+ if (id != 0x5d)
+ return -ENODEV;
+
+ /* Note: 0x25 is the 1404 which is very similar and this
+ driver could be extended */
+ id = i2c_smbus_read_byte_data(client, THERMAL_PID_REG);
+ if (id != 0x21)
+ return -ENODEV;
+
+ id = i2c_smbus_read_byte_data(client, THERMAL_REVISION_REG);
+ if (id != 0x01)
+ return -ENODEV;
+
+ strlcpy(info->type, "emc1403", I2C_NAME_SIZE);
+ return 0;
+}
+
+static int emc1403_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int res;
+ struct thermal_data *data;
+
+ data = kzalloc(sizeof(struct thermal_data), GFP_KERNEL);
+ if (data == NULL) {
+ dev_warn(&client->dev, "out of memory");
+ return -ENOMEM;
+ }
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->mutex);
+ data->hyst_valid = jiffies - 1; /* Expired */
+
+ res = sysfs_create_group(&client->dev.kobj, &m_thermal_gr);
+ if (res) {
+ dev_warn(&client->dev, "create group failed\n");
+ hwmon_device_unregister(data->hwmon_dev);
+ goto thermal_error1;
+ }
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ res = PTR_ERR(data->hwmon_dev);
+ dev_warn(&client->dev, "register hwmon dev failed\n");
+ goto thermal_error2;
+ }
+ dev_info(&client->dev, "EMC1403 Thermal chip found\n");
+ return res;
+
+thermal_error2:
+ sysfs_remove_group(&client->dev.kobj, &m_thermal_gr);
+thermal_error1:
+ kfree(data);
+ return res;
+}
+
+static int emc1403_remove(struct i2c_client *client)
+{
+ struct thermal_data *data = i2c_get_clientdata(client);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &m_thermal_gr);
+ kfree(data);
+ return 0;
+}
+
+static const unsigned short emc1403_address_list[] = {
+ 0x18, 0x2a, 0x4c, 0x4d, I2C_CLIENT_END
+};
+
+static const struct i2c_device_id emc1403_idtable[] = {
+ { "emc1403", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, emc1403_idtable);
+
+static struct i2c_driver sensor_emc1403 = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "emc1403",
+ },
+ .detect = emc1403_detect,
+ .probe = emc1403_probe,
+ .remove = emc1403_remove,
+ .id_table = emc1403_idtable,
+ .address_list = emc1403_address_list,
+};
+
+static int __init sensor_emc1403_init(void)
+{
+ return i2c_add_driver(&sensor_emc1403);
+}
+
+static void __exit sensor_emc1403_exit(void)
+{
+ i2c_del_driver(&sensor_emc1403);
+}
+
+module_init(sensor_emc1403_init);
+module_exit(sensor_emc1403_exit);
+
+MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com");
+MODULE_DESCRIPTION("emc1403 Thermal Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index a95fa42..537841e 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -856,21 +856,19 @@
static int superio_inw(int base, int reg)
{
int val;
- outb(reg++, base);
- val = inb(base + 1) << 8;
- outb(reg, base);
- val |= inb(base + 1);
+ val = superio_inb(base, reg) << 8;
+ val |= superio_inb(base, reg + 1);
return val;
}
static inline void superio_enter(int base)
{
/* according to the datasheet the key must be send twice! */
- outb( SIO_UNLOCK_KEY, base);
- outb( SIO_UNLOCK_KEY, base);
+ outb(SIO_UNLOCK_KEY, base);
+ outb(SIO_UNLOCK_KEY, base);
}
-static inline void superio_select( int base, int ld)
+static inline void superio_select(int base, int ld)
{
outb(SIO_REG_LDSEL, base);
outb(ld, base + 1);
@@ -905,10 +903,8 @@
{
u16 val;
- outb(reg++, data->addr + ADDR_REG_OFFSET);
- val = inb(data->addr + DATA_REG_OFFSET) << 8;
- outb(reg, data->addr + ADDR_REG_OFFSET);
- val |= inb(data->addr + DATA_REG_OFFSET);
+ val = f71882fg_read8(data, reg) << 8;
+ val |= f71882fg_read8(data, reg + 1);
return val;
}
@@ -921,10 +917,8 @@
static void f71882fg_write16(struct f71882fg_data *data, u8 reg, u16 val)
{
- outb(reg++, data->addr + ADDR_REG_OFFSET);
- outb(val >> 8, data->addr + DATA_REG_OFFSET);
- outb(reg, data->addr + ADDR_REG_OFFSET);
- outb(val & 255, data->addr + DATA_REG_OFFSET);
+ f71882fg_write8(data, reg, val >> 8);
+ f71882fg_write8(data, reg + 1, val & 0xff);
}
static u16 f71882fg_read_temp(struct f71882fg_data *data, int nr)
@@ -945,7 +939,7 @@
mutex_lock(&data->update_lock);
/* Update once every 60 seconds */
- if ( time_after(jiffies, data->last_limits + 60 * HZ ) ||
+ if (time_after(jiffies, data->last_limits + 60 * HZ) ||
!data->valid) {
if (data->type == f71882fg || data->type == f71889fg) {
data->in1_max =
@@ -1127,8 +1121,12 @@
const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
- int nr = to_sensor_dev_attr_2(devattr)->index;
- long val = simple_strtol(buf, NULL, 10);
+ int err, nr = to_sensor_dev_attr_2(devattr)->index;
+ long val;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err)
+ return err;
val = SENSORS_LIMIT(val, 23, 1500000);
val = fan_to_reg(val);
@@ -1157,8 +1155,12 @@
*devattr, const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
- int nr = to_sensor_dev_attr_2(devattr)->index;
- unsigned long val = simple_strtoul(buf, NULL, 10);
+ int err, nr = to_sensor_dev_attr_2(devattr)->index;
+ unsigned long val;
+
+ err = strict_strtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
data->fan_beep = f71882fg_read8(data, F71882FG_REG_FAN_BEEP);
@@ -1206,7 +1208,14 @@
*devattr, const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
- long val = simple_strtol(buf, NULL, 10) / 8;
+ int err;
+ long val;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err)
+ return err;
+
+ val /= 8;
val = SENSORS_LIMIT(val, 0, 255);
mutex_lock(&data->update_lock);
@@ -1233,8 +1242,12 @@
*devattr, const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
- int nr = to_sensor_dev_attr_2(devattr)->index;
- unsigned long val = simple_strtoul(buf, NULL, 10);
+ int err, nr = to_sensor_dev_attr_2(devattr)->index;
+ unsigned long val;
+
+ err = strict_strtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
data->in_beep = f71882fg_read8(data, F71882FG_REG_IN_BEEP);
@@ -1299,8 +1312,14 @@
*devattr, const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
- int nr = to_sensor_dev_attr_2(devattr)->index;
- long val = simple_strtol(buf, NULL, 10) / 1000;
+ int err, nr = to_sensor_dev_attr_2(devattr)->index;
+ long val;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err)
+ return err;
+
+ val /= 1000;
val = SENSORS_LIMIT(val, 0, 255);
mutex_lock(&data->update_lock);
@@ -1333,10 +1352,16 @@
*devattr, const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
- int nr = to_sensor_dev_attr_2(devattr)->index;
- long val = simple_strtol(buf, NULL, 10) / 1000;
+ int err, nr = to_sensor_dev_attr_2(devattr)->index;
ssize_t ret = count;
u8 reg;
+ long val;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err)
+ return err;
+
+ val /= 1000;
mutex_lock(&data->update_lock);
@@ -1372,8 +1397,14 @@
*devattr, const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
- int nr = to_sensor_dev_attr_2(devattr)->index;
- long val = simple_strtol(buf, NULL, 10) / 1000;
+ int err, nr = to_sensor_dev_attr_2(devattr)->index;
+ long val;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err)
+ return err;
+
+ val /= 1000;
val = SENSORS_LIMIT(val, 0, 255);
mutex_lock(&data->update_lock);
@@ -1427,8 +1458,12 @@
*devattr, const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
- int nr = to_sensor_dev_attr_2(devattr)->index;
- unsigned long val = simple_strtoul(buf, NULL, 10);
+ int err, nr = to_sensor_dev_attr_2(devattr)->index;
+ unsigned long val;
+
+ err = strict_strtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
data->temp_beep = f71882fg_read8(data, F71882FG_REG_TEMP_BEEP);
@@ -1490,8 +1525,13 @@
size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
- int nr = to_sensor_dev_attr_2(devattr)->index;
- long val = simple_strtol(buf, NULL, 10);
+ int err, nr = to_sensor_dev_attr_2(devattr)->index;
+ long val;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err)
+ return err;
+
val = SENSORS_LIMIT(val, 0, 255);
mutex_lock(&data->update_lock);
@@ -1551,8 +1591,12 @@
*devattr, const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
- int nr = to_sensor_dev_attr_2(devattr)->index;
- long val = simple_strtol(buf, NULL, 10);
+ int err, nr = to_sensor_dev_attr_2(devattr)->index;
+ long val;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err)
+ return err;
/* Special case for F8000 pwm channel 3 which only does auto mode */
if (data->type == f8000 && nr == 2 && val != 2)
@@ -1626,9 +1670,14 @@
const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
- int pwm = to_sensor_dev_attr_2(devattr)->index;
+ int err, pwm = to_sensor_dev_attr_2(devattr)->index;
int point = to_sensor_dev_attr_2(devattr)->nr;
- long val = simple_strtol(buf, NULL, 10);
+ long val;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err)
+ return err;
+
val = SENSORS_LIMIT(val, 0, 255);
mutex_lock(&data->update_lock);
@@ -1674,10 +1723,16 @@
const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
- int nr = to_sensor_dev_attr_2(devattr)->index;
+ int err, nr = to_sensor_dev_attr_2(devattr)->index;
int point = to_sensor_dev_attr_2(devattr)->nr;
- long val = simple_strtol(buf, NULL, 10) / 1000;
u8 reg;
+ long val;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err)
+ return err;
+
+ val /= 1000;
mutex_lock(&data->update_lock);
data->pwm_auto_point_temp[nr][point] =
@@ -1716,8 +1771,12 @@
const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
- int nr = to_sensor_dev_attr_2(devattr)->index;
- unsigned long val = simple_strtoul(buf, NULL, 10);
+ int err, nr = to_sensor_dev_attr_2(devattr)->index;
+ unsigned long val;
+
+ err = strict_strtoul(buf, 10, &val);
+ if (err)
+ return err;
mutex_lock(&data->update_lock);
data->pwm_auto_point_mapping[nr] =
@@ -1752,8 +1811,12 @@
const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
- int nr = to_sensor_dev_attr_2(devattr)->index;
- long val = simple_strtol(buf, NULL, 10);
+ int err, nr = to_sensor_dev_attr_2(devattr)->index;
+ long val;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err)
+ return err;
switch (val) {
case 1:
@@ -1798,9 +1861,15 @@
const char *buf, size_t count)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
- int pwm = to_sensor_dev_attr_2(devattr)->index;
+ int err, pwm = to_sensor_dev_attr_2(devattr)->index;
int point = to_sensor_dev_attr_2(devattr)->nr;
- long val = simple_strtol(buf, NULL, 10) / 1000;
+ long val;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err)
+ return err;
+
+ val /= 1000;
if (data->type == f71889fg)
val = SENSORS_LIMIT(val, -128, 127);
@@ -2109,6 +2178,13 @@
int err = -ENODEV;
u16 devid;
+ /* Don't step on other drivers' I/O space by accident */
+ if (!request_region(sioaddr, 2, DRVNAME)) {
+ printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n",
+ (int)sioaddr);
+ return -EBUSY;
+ }
+
superio_enter(sioaddr);
devid = superio_inw(sioaddr, SIO_REG_MANID);
@@ -2151,8 +2227,7 @@
}
*address = superio_inw(sioaddr, SIO_REG_ADDR);
- if (*address == 0)
- {
+ if (*address == 0) {
printk(KERN_WARNING DRVNAME ": Base address not set\n");
goto exit;
}
@@ -2164,6 +2239,7 @@
(int)superio_inb(sioaddr, SIO_REG_DEVREV));
exit:
superio_exit(sioaddr);
+ release_region(sioaddr, 2);
return err;
}
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index bad2cf3..0f58ecc 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -662,7 +662,6 @@
sysfs_remove_group(&client->dev.kobj, &f75375_group);
exit_free:
kfree(data);
- i2c_set_clientdata(client, NULL);
return err;
}
@@ -672,7 +671,6 @@
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &f75375_group);
kfree(data);
- i2c_set_clientdata(client, NULL);
return 0;
}
diff --git a/drivers/hwmon/g760a.c b/drivers/hwmon/g760a.c
index 09ea12e..1f63d1a 100644
--- a/drivers/hwmon/g760a.c
+++ b/drivers/hwmon/g760a.c
@@ -236,7 +236,6 @@
sysfs_remove_group(&client->dev.kobj, &g760a_group);
error_sysfs_create_group:
kfree(data);
- i2c_set_clientdata(client, NULL);
return err;
}
@@ -247,7 +246,6 @@
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &g760a_group);
kfree(data);
- i2c_set_clientdata(client, NULL);
return 0;
}
diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
index e880e2c..9379834 100644
--- a/drivers/hwmon/i5k_amb.c
+++ b/drivers/hwmon/i5k_amb.c
@@ -289,6 +289,7 @@
iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
iattr->s_attr.dev_attr.show = show_label;
iattr->s_attr.index = k;
+ sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
res = device_create_file(&pdev->dev,
&iattr->s_attr.dev_attr);
if (res)
@@ -303,6 +304,7 @@
iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
iattr->s_attr.dev_attr.show = show_amb_temp;
iattr->s_attr.index = k;
+ sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
res = device_create_file(&pdev->dev,
&iattr->s_attr.dev_attr);
if (res)
@@ -318,6 +320,7 @@
iattr->s_attr.dev_attr.show = show_amb_min;
iattr->s_attr.dev_attr.store = store_amb_min;
iattr->s_attr.index = k;
+ sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
res = device_create_file(&pdev->dev,
&iattr->s_attr.dev_attr);
if (res)
@@ -333,6 +336,7 @@
iattr->s_attr.dev_attr.show = show_amb_mid;
iattr->s_attr.dev_attr.store = store_amb_mid;
iattr->s_attr.index = k;
+ sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
res = device_create_file(&pdev->dev,
&iattr->s_attr.dev_attr);
if (res)
@@ -348,6 +352,7 @@
iattr->s_attr.dev_attr.show = show_amb_max;
iattr->s_attr.dev_attr.store = store_amb_max;
iattr->s_attr.index = k;
+ sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
res = device_create_file(&pdev->dev,
&iattr->s_attr.dev_attr);
if (res)
@@ -362,6 +367,7 @@
iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
iattr->s_attr.dev_attr.show = show_amb_alarm;
iattr->s_attr.index = k;
+ sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
res = device_create_file(&pdev->dev,
&iattr->s_attr.dev_attr);
if (res)
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 5be09c0..25763d2 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -80,6 +80,13 @@
return inb(VAL);
}
+static inline void
+superio_outb(int reg, int val)
+{
+ outb(reg, REG);
+ outb(val, VAL);
+}
+
static int superio_inw(int reg)
{
int val;
@@ -1517,6 +1524,21 @@
sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
reg = superio_inb(IT87_SIO_PINX2_REG);
+ /*
+ * The IT8720F has no VIN7 pin, so VCCH should always be
+ * routed internally to VIN7 with an internal divider.
+ * Curiously, there still is a configuration bit to control
+ * this, which means it can be set incorrectly. And even
+ * more curiously, many boards out there are improperly
+ * configured, even though the IT8720F datasheet claims
+ * that the internal routing of VCCH to VIN7 is the default
+ * setting. So we force the internal routing in this case.
+ */
+ if (sio_data->type == it8720 && !(reg & (1 << 1))) {
+ reg |= (1 << 1);
+ superio_outb(IT87_SIO_PINX2_REG, reg);
+ pr_notice("it87: Routing internal VCCH to in7\n");
+ }
if (reg & (1 << 0))
pr_info("it87: in3 is VCC (+5V)\n");
if (reg & (1 << 1))
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index 099a213..da5a240 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -112,11 +112,21 @@
if (pkg_type != CPUID_PKGTYPE_AM2R2_AM3)
return false;
- /* Differentiate between AM2+ (bad) and AM3 (good) */
+ /* DDR3 memory implies socket AM3, which is good */
pci_bus_read_config_dword(pdev->bus,
PCI_DEVFN(PCI_SLOT(pdev->devfn), 2),
REG_DCT0_CONFIG_HIGH, ®_dram_cfg);
- return !(reg_dram_cfg & DDR3_MODE);
+ if (reg_dram_cfg & DDR3_MODE)
+ return false;
+
+ /*
+ * Unfortunately it is possible to run a socket AM3 CPU with DDR2
+ * memory. We blacklist all the cores which do exist in socket AM2+
+ * format. It still isn't perfect, as RB-C2 cores exist in both AM2+
+ * and AM3 formats, but that's the best we can do.
+ */
+ return boot_cpu_data.x86_model < 4 ||
+ (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_mask <= 2);
}
static int __devinit k10temp_probe(struct pci_dev *pdev,
diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
index 0ceb6d6..8bdf80d 100644
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -120,7 +120,7 @@
int temp;
struct k8temp_data *data = k8temp_update_device(dev);
- if (data->swap_core_select)
+ if (data->swap_core_select && (data->sensorsp & SEL_CORE))
core = core ? 0 : 1;
temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
@@ -180,11 +180,13 @@
}
if ((model >= 0x69) &&
- !(model == 0xc1 || model == 0x6c || model == 0x7c)) {
+ !(model == 0xc1 || model == 0x6c || model == 0x7c ||
+ model == 0x6b || model == 0x6f || model == 0x7f)) {
/*
- * RevG desktop CPUs (i.e. no socket S1G1 parts)
- * need additional offset, otherwise reported
- * temperature is below ambient temperature
+ * RevG desktop CPUs (i.e. no socket S1G1 or
+ * ASB1 parts) need additional offset,
+ * otherwise reported temperature is below
+ * ambient temperature
*/
data->temp_offset = 21000;
}
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index bf81aff..776aeb3 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -53,7 +53,7 @@
* Address is fully defined internally and cannot be changed.
*/
-static const unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x18, 0x4c, 0x4e, I2C_CLIENT_END };
/*
* The LM63 registers
@@ -131,12 +131,15 @@
static int lm63_detect(struct i2c_client *client, struct i2c_board_info *info);
static void lm63_init_client(struct i2c_client *client);
+enum chips { lm63, lm64 };
+
/*
* Driver data (common to all clients)
*/
static const struct i2c_device_id lm63_id[] = {
- { "lm63", 0 },
+ { "lm63", lm63 },
+ { "lm64", lm64 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm63_id);
@@ -422,6 +425,7 @@
struct i2c_adapter *adapter = new_client->adapter;
u8 man_id, chip_id, reg_config1, reg_config2;
u8 reg_alert_status, reg_alert_mask;
+ int address = new_client->addr;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
@@ -439,7 +443,6 @@
LM63_REG_ALERT_MASK);
if (man_id != 0x01 /* National Semiconductor */
- || chip_id != 0x41 /* LM63 */
|| (reg_config1 & 0x18) != 0x00
|| (reg_config2 & 0xF8) != 0x00
|| (reg_alert_status & 0x20) != 0x00
@@ -450,7 +453,12 @@
return -ENODEV;
}
- strlcpy(info->type, "lm63", I2C_NAME_SIZE);
+ if (chip_id == 0x41 && address == 0x4c)
+ strlcpy(info->type, "lm63", I2C_NAME_SIZE);
+ else if (chip_id == 0x51 && (address == 0x18 || address == 0x4e))
+ strlcpy(info->type, "lm64", I2C_NAME_SIZE);
+ else
+ return -ENODEV;
return 0;
}
diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c
index 4d1b76b..29b9030 100644
--- a/drivers/hwmon/lm73.c
+++ b/drivers/hwmon/lm73.c
@@ -136,7 +136,6 @@
hwmon_device_unregister(hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm73_group);
- i2c_set_clientdata(client, NULL);
return 0;
}
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 8ae2cfe..393f354 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -46,6 +46,7 @@
tcn75,
tmp100,
tmp101,
+ tmp105,
tmp175,
tmp275,
tmp75,
@@ -191,7 +192,6 @@
exit_remove:
sysfs_remove_group(&client->dev.kobj, &lm75_group);
exit_free:
- i2c_set_clientdata(client, NULL);
kfree(data);
return status;
}
@@ -203,7 +203,6 @@
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm75_group);
lm75_write_value(client, LM75_REG_CONF, data->orig_conf);
- i2c_set_clientdata(client, NULL);
kfree(data);
return 0;
}
@@ -220,6 +219,7 @@
{ "tcn75", tcn75, },
{ "tmp100", tmp100, },
{ "tmp101", tmp101, },
+ { "tmp105", tmp105, },
{ "tmp175", tmp175, },
{ "tmp275", tmp275, },
{ "tmp75", tmp75, },
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 7cc2708..760ef72 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -982,7 +982,8 @@
mutex_lock(&data->update_lock);
- if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ / 2 + HZ / 10)
+ || !data->valid) {
u8 h, l;
dev_dbg(&client->dev, "Updating lm90 data.\n");
diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c
index 8fc8eb8..94741d4 100644
--- a/drivers/hwmon/lm95241.c
+++ b/drivers/hwmon/lm95241.c
@@ -399,7 +399,6 @@
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm95241_group);
- i2c_set_clientdata(client, NULL);
kfree(data);
return 0;
}
diff --git a/drivers/hwmon/ltc4245.c b/drivers/hwmon/ltc4245.c
index 65c232a..21d201b 100644
--- a/drivers/hwmon/ltc4245.c
+++ b/drivers/hwmon/ltc4245.c
@@ -45,9 +45,7 @@
LTC4245_VEEIN = 0x19,
LTC4245_VEESENSE = 0x1a,
LTC4245_VEEOUT = 0x1b,
- LTC4245_GPIOADC1 = 0x1c,
- LTC4245_GPIOADC2 = 0x1d,
- LTC4245_GPIOADC3 = 0x1e,
+ LTC4245_GPIOADC = 0x1c,
};
struct ltc4245_data {
@@ -61,7 +59,7 @@
u8 cregs[0x08];
/* Voltage registers */
- u8 vregs[0x0f];
+ u8 vregs[0x0d];
};
static struct ltc4245_data *ltc4245_update_device(struct device *dev)
@@ -86,7 +84,7 @@
data->cregs[i] = val;
}
- /* Read voltage registers -- 0x10 to 0x1f */
+ /* Read voltage registers -- 0x10 to 0x1c */
for (i = 0; i < ARRAY_SIZE(data->vregs); i++) {
val = i2c_smbus_read_byte_data(client, i+0x10);
if (unlikely(val < 0))
@@ -128,9 +126,7 @@
case LTC4245_VEEOUT:
voltage = regval * -55;
break;
- case LTC4245_GPIOADC1:
- case LTC4245_GPIOADC2:
- case LTC4245_GPIOADC3:
+ case LTC4245_GPIOADC:
voltage = regval * 10;
break;
default:
@@ -297,9 +293,7 @@
LTC4245_ALARM(in8_min_alarm, (1 << 3), LTC4245_FAULT2);
/* GPIO voltages */
-LTC4245_VOLTAGE(in9_input, LTC4245_GPIOADC1);
-LTC4245_VOLTAGE(in10_input, LTC4245_GPIOADC2);
-LTC4245_VOLTAGE(in11_input, LTC4245_GPIOADC3);
+LTC4245_VOLTAGE(in9_input, LTC4245_GPIOADC);
/* Power Consumption (virtual) */
LTC4245_POWER(power1_input, LTC4245_12VSENSE);
@@ -342,8 +336,6 @@
&sensor_dev_attr_in8_min_alarm.dev_attr.attr,
&sensor_dev_attr_in9_input.dev_attr.attr,
- &sensor_dev_attr_in10_input.dev_attr.attr,
- &sensor_dev_attr_in11_input.dev_attr.attr,
&sensor_dev_attr_power1_input.dev_attr.attr,
&sensor_dev_attr_power2_input.dev_attr.attr,
diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c
new file mode 100644
index 0000000..93187c3
--- /dev/null
+++ b/drivers/hwmon/tmp102.c
@@ -0,0 +1,319 @@
+/* Texas Instruments TMP102 SMBus temperature sensor driver
+ *
+ * Copyright (C) 2010 Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+
+#define DRIVER_NAME "tmp102"
+
+#define TMP102_TEMP_REG 0x00
+#define TMP102_CONF_REG 0x01
+/* note: these bit definitions are byte swapped */
+#define TMP102_CONF_SD 0x0100
+#define TMP102_CONF_TM 0x0200
+#define TMP102_CONF_POL 0x0400
+#define TMP102_CONF_F0 0x0800
+#define TMP102_CONF_F1 0x1000
+#define TMP102_CONF_R0 0x2000
+#define TMP102_CONF_R1 0x4000
+#define TMP102_CONF_OS 0x8000
+#define TMP102_CONF_EM 0x0010
+#define TMP102_CONF_AL 0x0020
+#define TMP102_CONF_CR0 0x0040
+#define TMP102_CONF_CR1 0x0080
+#define TMP102_TLOW_REG 0x02
+#define TMP102_THIGH_REG 0x03
+
+struct tmp102 {
+ struct device *hwmon_dev;
+ struct mutex lock;
+ u16 config_orig;
+ unsigned long last_update;
+ int temp[3];
+};
+
+/* SMBus specifies low byte first, but the TMP102 returns high byte first,
+ * so we have to swab16 the values */
+static inline int tmp102_read_reg(struct i2c_client *client, u8 reg)
+{
+ int result = i2c_smbus_read_word_data(client, reg);
+ return result < 0 ? result : swab16(result);
+}
+
+static inline int tmp102_write_reg(struct i2c_client *client, u8 reg, u16 val)
+{
+ return i2c_smbus_write_word_data(client, reg, swab16(val));
+}
+
+/* convert left adjusted 13-bit TMP102 register value to milliCelsius */
+static inline int tmp102_reg_to_mC(s16 val)
+{
+ return ((val & ~0x01) * 1000) / 128;
+}
+
+/* convert milliCelsius to left adjusted 13-bit TMP102 register value */
+static inline u16 tmp102_mC_to_reg(int val)
+{
+ return (val * 128) / 1000;
+}
+
+static const u8 tmp102_reg[] = {
+ TMP102_TEMP_REG,
+ TMP102_TLOW_REG,
+ TMP102_THIGH_REG,
+};
+
+static struct tmp102 *tmp102_update_device(struct i2c_client *client)
+{
+ struct tmp102 *tmp102 = i2c_get_clientdata(client);
+
+ mutex_lock(&tmp102->lock);
+ if (time_after(jiffies, tmp102->last_update + HZ / 3)) {
+ int i;
+ for (i = 0; i < ARRAY_SIZE(tmp102->temp); ++i) {
+ int status = tmp102_read_reg(client, tmp102_reg[i]);
+ if (status > -1)
+ tmp102->temp[i] = tmp102_reg_to_mC(status);
+ }
+ tmp102->last_update = jiffies;
+ }
+ mutex_unlock(&tmp102->lock);
+ return tmp102;
+}
+
+static ssize_t tmp102_show_temp(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
+ struct tmp102 *tmp102 = tmp102_update_device(to_i2c_client(dev));
+
+ return sprintf(buf, "%d\n", tmp102->temp[sda->index]);
+}
+
+static ssize_t tmp102_set_temp(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct tmp102 *tmp102 = i2c_get_clientdata(client);
+ long val;
+ int status;
+
+ if (strict_strtol(buf, 10, &val) < 0)
+ return -EINVAL;
+ val = SENSORS_LIMIT(val, -256000, 255000);
+
+ mutex_lock(&tmp102->lock);
+ tmp102->temp[sda->index] = val;
+ status = tmp102_write_reg(client, tmp102_reg[sda->index],
+ tmp102_mC_to_reg(val));
+ mutex_unlock(&tmp102->lock);
+ return status ? : count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, tmp102_show_temp, NULL , 0);
+
+static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, tmp102_show_temp,
+ tmp102_set_temp, 1);
+
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, tmp102_show_temp,
+ tmp102_set_temp, 2);
+
+static struct attribute *tmp102_attributes[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group tmp102_attr_group = {
+ .attrs = tmp102_attributes,
+};
+
+#define TMP102_CONFIG (TMP102_CONF_TM | TMP102_CONF_EM | TMP102_CONF_CR1)
+#define TMP102_CONFIG_RD_ONLY (TMP102_CONF_R0 | TMP102_CONF_R1 | TMP102_CONF_AL)
+
+static int __devinit tmp102_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct tmp102 *tmp102;
+ int status;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_WORD_DATA)) {
+ dev_err(&client->dev, "adapter doesnt support SMBus word "
+ "transactions\n");
+ return -ENODEV;
+ }
+
+ tmp102 = kzalloc(sizeof(*tmp102), GFP_KERNEL);
+ if (!tmp102) {
+ dev_dbg(&client->dev, "kzalloc failed\n");
+ return -ENOMEM;
+ }
+ i2c_set_clientdata(client, tmp102);
+
+ status = tmp102_read_reg(client, TMP102_CONF_REG);
+ if (status < 0) {
+ dev_err(&client->dev, "error reading config register\n");
+ goto fail_free;
+ }
+ tmp102->config_orig = status;
+ status = tmp102_write_reg(client, TMP102_CONF_REG, TMP102_CONFIG);
+ if (status < 0) {
+ dev_err(&client->dev, "error writing config register\n");
+ goto fail_restore_config;
+ }
+ status = tmp102_read_reg(client, TMP102_CONF_REG);
+ if (status < 0) {
+ dev_err(&client->dev, "error reading config register\n");
+ goto fail_restore_config;
+ }
+ status &= ~TMP102_CONFIG_RD_ONLY;
+ if (status != TMP102_CONFIG) {
+ dev_err(&client->dev, "config settings did not stick\n");
+ status = -ENODEV;
+ goto fail_restore_config;
+ }
+ tmp102->last_update = jiffies - HZ;
+ mutex_init(&tmp102->lock);
+
+ status = sysfs_create_group(&client->dev.kobj, &tmp102_attr_group);
+ if (status) {
+ dev_dbg(&client->dev, "could not create sysfs files\n");
+ goto fail_restore_config;
+ }
+ tmp102->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(tmp102->hwmon_dev)) {
+ dev_dbg(&client->dev, "unable to register hwmon device\n");
+ status = PTR_ERR(tmp102->hwmon_dev);
+ goto fail_remove_sysfs;
+ }
+
+ dev_info(&client->dev, "initialized\n");
+
+ return 0;
+
+fail_remove_sysfs:
+ sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group);
+fail_restore_config:
+ tmp102_write_reg(client, TMP102_CONF_REG, tmp102->config_orig);
+fail_free:
+ kfree(tmp102);
+
+ return status;
+}
+
+static int __devexit tmp102_remove(struct i2c_client *client)
+{
+ struct tmp102 *tmp102 = i2c_get_clientdata(client);
+
+ hwmon_device_unregister(tmp102->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group);
+
+ /* Stop monitoring if device was stopped originally */
+ if (tmp102->config_orig & TMP102_CONF_SD) {
+ int config;
+
+ config = tmp102_read_reg(client, TMP102_CONF_REG);
+ if (config >= 0)
+ tmp102_write_reg(client, TMP102_CONF_REG,
+ config | TMP102_CONF_SD);
+ }
+
+ kfree(tmp102);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int tmp102_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ int config;
+
+ config = tmp102_read_reg(client, TMP102_CONF_REG);
+ if (config < 0)
+ return config;
+
+ config |= TMP102_CONF_SD;
+ return tmp102_write_reg(client, TMP102_CONF_REG, config);
+}
+
+static int tmp102_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ int config;
+
+ config = tmp102_read_reg(client, TMP102_CONF_REG);
+ if (config < 0)
+ return config;
+
+ config &= ~TMP102_CONF_SD;
+ return tmp102_write_reg(client, TMP102_CONF_REG, config);
+}
+
+static const struct dev_pm_ops tmp102_dev_pm_ops = {
+ .suspend = tmp102_suspend,
+ .resume = tmp102_resume,
+};
+
+#define TMP102_DEV_PM_OPS (&tmp102_dev_pm_ops)
+#else
+#define TMP102_DEV_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+static const struct i2c_device_id tmp102_id[] = {
+ { "tmp102", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tmp102_id);
+
+static struct i2c_driver tmp102_driver = {
+ .driver.name = DRIVER_NAME,
+ .driver.pm = TMP102_DEV_PM_OPS,
+ .probe = tmp102_probe,
+ .remove = __devexit_p(tmp102_remove),
+ .id_table = tmp102_id,
+};
+
+static int __init tmp102_init(void)
+{
+ return i2c_add_driver(&tmp102_driver);
+}
+module_init(tmp102_init);
+
+static void __exit tmp102_exit(void)
+{
+ i2c_del_driver(&tmp102_driver);
+}
+module_exit(tmp102_exit);
+
+MODULE_AUTHOR("Steven King <sfking@fdwdc.com>");
+MODULE_DESCRIPTION("Texas Instruments TMP102 temperature sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c
index d14a1af..ad8d535 100644
--- a/drivers/hwmon/tmp401.c
+++ b/drivers/hwmon/tmp401.c
@@ -92,17 +92,6 @@
#define TMP411_DEVICE_ID 0x12
/*
- * Functions declarations
- */
-
-static int tmp401_probe(struct i2c_client *client,
- const struct i2c_device_id *id);
-static int tmp401_detect(struct i2c_client *client,
- struct i2c_board_info *info);
-static int tmp401_remove(struct i2c_client *client);
-static struct tmp401_data *tmp401_update_device(struct device *dev);
-
-/*
* Driver data (common to all clients)
*/
@@ -113,18 +102,6 @@
};
MODULE_DEVICE_TABLE(i2c, tmp401_id);
-static struct i2c_driver tmp401_driver = {
- .class = I2C_CLASS_HWMON,
- .driver = {
- .name = "tmp401",
- },
- .probe = tmp401_probe,
- .remove = tmp401_remove,
- .id_table = tmp401_id,
- .detect = tmp401_detect,
- .address_list = normal_i2c,
-};
-
/*
* Client data (each client gets its own)
*/
@@ -194,6 +171,71 @@
return (temp + 500) / 1000;
}
+static struct tmp401_data *tmp401_update_device_reg16(
+ struct i2c_client *client, struct tmp401_data *data)
+{
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ /*
+ * High byte must be read first immediately followed
+ * by the low byte
+ */
+ data->temp[i] = i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_MSB[i]) << 8;
+ data->temp[i] |= i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_LSB[i]);
+ data->temp_low[i] = i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_LOW_LIMIT_MSB_READ[i]) << 8;
+ data->temp_low[i] |= i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_LOW_LIMIT_LSB[i]);
+ data->temp_high[i] = i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_HIGH_LIMIT_MSB_READ[i]) << 8;
+ data->temp_high[i] |= i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_HIGH_LIMIT_LSB[i]);
+ data->temp_crit[i] = i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_CRIT_LIMIT[i]);
+
+ if (data->kind == tmp411) {
+ data->temp_lowest[i] = i2c_smbus_read_byte_data(client,
+ TMP411_TEMP_LOWEST_MSB[i]) << 8;
+ data->temp_lowest[i] |= i2c_smbus_read_byte_data(
+ client, TMP411_TEMP_LOWEST_LSB[i]);
+
+ data->temp_highest[i] = i2c_smbus_read_byte_data(
+ client, TMP411_TEMP_HIGHEST_MSB[i]) << 8;
+ data->temp_highest[i] |= i2c_smbus_read_byte_data(
+ client, TMP411_TEMP_HIGHEST_LSB[i]);
+ }
+ }
+ return data;
+}
+
+static struct tmp401_data *tmp401_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct tmp401_data *data = i2c_get_clientdata(client);
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+ data->status = i2c_smbus_read_byte_data(client, TMP401_STATUS);
+ data->config = i2c_smbus_read_byte_data(client,
+ TMP401_CONFIG_READ);
+ tmp401_update_device_reg16(client, data);
+
+ data->temp_crit_hyst = i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_CRIT_HYST);
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ mutex_unlock(&data->update_lock);
+
+ return data;
+}
+
static ssize_t show_temp_value(struct device *dev,
struct device_attribute *devattr, char *buf)
{
@@ -420,30 +462,36 @@
}
static struct sensor_device_attribute tmp401_attr[] = {
- SENSOR_ATTR(temp1_input, 0444, show_temp_value, NULL, 0),
- SENSOR_ATTR(temp1_min, 0644, show_temp_min, store_temp_min, 0),
- SENSOR_ATTR(temp1_max, 0644, show_temp_max, store_temp_max, 0),
- SENSOR_ATTR(temp1_crit, 0644, show_temp_crit, store_temp_crit, 0),
- SENSOR_ATTR(temp1_crit_hyst, 0644, show_temp_crit_hyst,
+ SENSOR_ATTR(temp1_input, S_IRUGO, show_temp_value, NULL, 0),
+ SENSOR_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min,
+ store_temp_min, 0),
+ SENSOR_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
+ store_temp_max, 0),
+ SENSOR_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp_crit,
+ store_temp_crit, 0),
+ SENSOR_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp_crit_hyst,
store_temp_crit_hyst, 0),
- SENSOR_ATTR(temp1_min_alarm, 0444, show_status, NULL,
+ SENSOR_ATTR(temp1_min_alarm, S_IRUGO, show_status, NULL,
TMP401_STATUS_LOCAL_LOW),
- SENSOR_ATTR(temp1_max_alarm, 0444, show_status, NULL,
+ SENSOR_ATTR(temp1_max_alarm, S_IRUGO, show_status, NULL,
TMP401_STATUS_LOCAL_HIGH),
- SENSOR_ATTR(temp1_crit_alarm, 0444, show_status, NULL,
+ SENSOR_ATTR(temp1_crit_alarm, S_IRUGO, show_status, NULL,
TMP401_STATUS_LOCAL_CRIT),
- SENSOR_ATTR(temp2_input, 0444, show_temp_value, NULL, 1),
- SENSOR_ATTR(temp2_min, 0644, show_temp_min, store_temp_min, 1),
- SENSOR_ATTR(temp2_max, 0644, show_temp_max, store_temp_max, 1),
- SENSOR_ATTR(temp2_crit, 0644, show_temp_crit, store_temp_crit, 1),
- SENSOR_ATTR(temp2_crit_hyst, 0444, show_temp_crit_hyst, NULL, 1),
- SENSOR_ATTR(temp2_fault, 0444, show_status, NULL,
+ SENSOR_ATTR(temp2_input, S_IRUGO, show_temp_value, NULL, 1),
+ SENSOR_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min,
+ store_temp_min, 1),
+ SENSOR_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max,
+ store_temp_max, 1),
+ SENSOR_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit,
+ store_temp_crit, 1),
+ SENSOR_ATTR(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL, 1),
+ SENSOR_ATTR(temp2_fault, S_IRUGO, show_status, NULL,
TMP401_STATUS_REMOTE_OPEN),
- SENSOR_ATTR(temp2_min_alarm, 0444, show_status, NULL,
+ SENSOR_ATTR(temp2_min_alarm, S_IRUGO, show_status, NULL,
TMP401_STATUS_REMOTE_LOW),
- SENSOR_ATTR(temp2_max_alarm, 0444, show_status, NULL,
+ SENSOR_ATTR(temp2_max_alarm, S_IRUGO, show_status, NULL,
TMP401_STATUS_REMOTE_HIGH),
- SENSOR_ATTR(temp2_crit_alarm, 0444, show_status, NULL,
+ SENSOR_ATTR(temp2_crit_alarm, S_IRUGO, show_status, NULL,
TMP401_STATUS_REMOTE_CRIT),
};
@@ -455,11 +503,11 @@
* and remote channels.
*/
static struct sensor_device_attribute tmp411_attr[] = {
- SENSOR_ATTR(temp1_highest, 0444, show_temp_highest, NULL, 0),
- SENSOR_ATTR(temp1_lowest, 0444, show_temp_lowest, NULL, 0),
- SENSOR_ATTR(temp2_highest, 0444, show_temp_highest, NULL, 1),
- SENSOR_ATTR(temp2_lowest, 0444, show_temp_lowest, NULL, 1),
- SENSOR_ATTR(temp_reset_history, 0200, NULL, reset_temp_history, 0),
+ SENSOR_ATTR(temp1_highest, S_IRUGO, show_temp_highest, NULL, 0),
+ SENSOR_ATTR(temp1_lowest, S_IRUGO, show_temp_lowest, NULL, 0),
+ SENSOR_ATTR(temp2_highest, S_IRUGO, show_temp_highest, NULL, 1),
+ SENSOR_ATTR(temp2_lowest, S_IRUGO, show_temp_lowest, NULL, 1),
+ SENSOR_ATTR(temp_reset_history, S_IWUSR, NULL, reset_temp_history, 0),
};
/*
@@ -529,6 +577,27 @@
return 0;
}
+static int tmp401_remove(struct i2c_client *client)
+{
+ struct tmp401_data *data = i2c_get_clientdata(client);
+ int i;
+
+ if (data->hwmon_dev)
+ hwmon_device_unregister(data->hwmon_dev);
+
+ for (i = 0; i < ARRAY_SIZE(tmp401_attr); i++)
+ device_remove_file(&client->dev, &tmp401_attr[i].dev_attr);
+
+ if (data->kind == tmp411) {
+ for (i = 0; i < ARRAY_SIZE(tmp411_attr); i++)
+ device_remove_file(&client->dev,
+ &tmp411_attr[i].dev_attr);
+ }
+
+ kfree(data);
+ return 0;
+}
+
static int tmp401_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -581,91 +650,17 @@
return err;
}
-static int tmp401_remove(struct i2c_client *client)
-{
- struct tmp401_data *data = i2c_get_clientdata(client);
- int i;
-
- if (data->hwmon_dev)
- hwmon_device_unregister(data->hwmon_dev);
-
- for (i = 0; i < ARRAY_SIZE(tmp401_attr); i++)
- device_remove_file(&client->dev, &tmp401_attr[i].dev_attr);
-
- if (data->kind == tmp411) {
- for (i = 0; i < ARRAY_SIZE(tmp411_attr); i++)
- device_remove_file(&client->dev,
- &tmp411_attr[i].dev_attr);
- }
-
- kfree(data);
- return 0;
-}
-
-static struct tmp401_data *tmp401_update_device_reg16(
- struct i2c_client *client, struct tmp401_data *data)
-{
- int i;
-
- for (i = 0; i < 2; i++) {
- /*
- * High byte must be read first immediately followed
- * by the low byte
- */
- data->temp[i] = i2c_smbus_read_byte_data(client,
- TMP401_TEMP_MSB[i]) << 8;
- data->temp[i] |= i2c_smbus_read_byte_data(client,
- TMP401_TEMP_LSB[i]);
- data->temp_low[i] = i2c_smbus_read_byte_data(client,
- TMP401_TEMP_LOW_LIMIT_MSB_READ[i]) << 8;
- data->temp_low[i] |= i2c_smbus_read_byte_data(client,
- TMP401_TEMP_LOW_LIMIT_LSB[i]);
- data->temp_high[i] = i2c_smbus_read_byte_data(client,
- TMP401_TEMP_HIGH_LIMIT_MSB_READ[i]) << 8;
- data->temp_high[i] |= i2c_smbus_read_byte_data(client,
- TMP401_TEMP_HIGH_LIMIT_LSB[i]);
- data->temp_crit[i] = i2c_smbus_read_byte_data(client,
- TMP401_TEMP_CRIT_LIMIT[i]);
-
- if (data->kind == tmp411) {
- data->temp_lowest[i] = i2c_smbus_read_byte_data(client,
- TMP411_TEMP_LOWEST_MSB[i]) << 8;
- data->temp_lowest[i] |= i2c_smbus_read_byte_data(
- client, TMP411_TEMP_LOWEST_LSB[i]);
-
- data->temp_highest[i] = i2c_smbus_read_byte_data(
- client, TMP411_TEMP_HIGHEST_MSB[i]) << 8;
- data->temp_highest[i] |= i2c_smbus_read_byte_data(
- client, TMP411_TEMP_HIGHEST_LSB[i]);
- }
- }
- return data;
-}
-
-static struct tmp401_data *tmp401_update_device(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct tmp401_data *data = i2c_get_clientdata(client);
-
- mutex_lock(&data->update_lock);
-
- if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
- data->status = i2c_smbus_read_byte_data(client, TMP401_STATUS);
- data->config = i2c_smbus_read_byte_data(client,
- TMP401_CONFIG_READ);
- tmp401_update_device_reg16(client, data);
-
- data->temp_crit_hyst = i2c_smbus_read_byte_data(client,
- TMP401_TEMP_CRIT_HYST);
-
- data->last_updated = jiffies;
- data->valid = 1;
- }
-
- mutex_unlock(&data->update_lock);
-
- return data;
-}
+static struct i2c_driver tmp401_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "tmp401",
+ },
+ .probe = tmp401_probe,
+ .remove = tmp401_remove,
+ .id_table = tmp401_id,
+ .detect = tmp401_detect,
+ .address_list = normal_i2c,
+};
static int __init tmp401_init(void)
{
diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c
index 738c472..6b4165c 100644
--- a/drivers/hwmon/tmp421.c
+++ b/drivers/hwmon/tmp421.c
@@ -295,7 +295,6 @@
sysfs_remove_group(&client->dev.kobj, &tmp421_group);
exit_free:
- i2c_set_clientdata(client, NULL);
kfree(data);
return err;
@@ -308,7 +307,6 @@
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &tmp421_group);
- i2c_set_clientdata(client, NULL);
kfree(data);
return 0;
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 32d4ade..c84b9b4 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1197,7 +1197,6 @@
if (data->lm75[1])
i2c_unregister_device(data->lm75[1]);
ERROR3:
- i2c_set_clientdata(client, NULL);
kfree(data);
ERROR1:
return err;
@@ -1219,7 +1218,6 @@
if (data->lm75[1])
i2c_unregister_device(data->lm75[1]);
- i2c_set_clientdata(client, NULL);
kfree(data);
return 0;
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 87ab056..bceafbf 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -475,6 +475,26 @@
help
Supports the PA Semi PWRficient on-chip SMBus interfaces.
+config I2C_PCA_PLATFORM
+ tristate "PCA9564/PCA9665 as platform device"
+ select I2C_ALGOPCA
+ default n
+ help
+ This driver supports a memory mapped Philips PCA9564/PCA9665
+ parallel bus to I2C bus controller.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-pca-platform.
+
+config I2C_PMCMSP
+ tristate "PMC MSP I2C TWI Controller"
+ depends on PMC_MSP
+ help
+ This driver supports the PMC TWI controller on MSP devices.
+
+ This driver can also be built as module. If so, the module
+ will be called i2c-pmcmsp.
+
config I2C_PNX
tristate "I2C bus support for Philips PNX targets"
depends on ARCH_PNX4008
@@ -711,26 +731,6 @@
delays when I2C/SMBus chip drivers are loaded (e.g. at boot
time). If unsure, say N.
-config I2C_PCA_PLATFORM
- tristate "PCA9564/PCA9665 as platform device"
- select I2C_ALGOPCA
- default n
- help
- This driver supports a memory mapped Philips PCA9564/PCA9665
- parallel bus to I2C bus controller.
-
- This driver can also be built as a module. If so, the module
- will be called i2c-pca-platform.
-
-config I2C_PMCMSP
- tristate "PMC MSP I2C TWI Controller"
- depends on PMC_MSP
- help
- This driver supports the PMC TWI controller on MSP devices.
-
- This driver can also be built as module. If so, the module
- will be called i2c-pmcmsp.
-
config I2C_SIBYTE
tristate "SiByte SMBus interface"
depends on SIBYTE_SB1xxx_SOC
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 097236f..936880b 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -27,7 +27,7 @@
obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o
obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
-# Embebbed system I2C/SMBus host controller drivers
+# Embedded system I2C/SMBus host controller drivers
obj-$(CONFIG_I2C_AT91) += i2c-at91.o
obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
@@ -46,6 +46,8 @@
obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o
obj-$(CONFIG_I2C_OMAP) += i2c-omap.o
obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
+obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o
+obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
@@ -68,8 +70,6 @@
obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
-obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o
-obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
obj-$(CONFIG_I2C_STUB) += i2c-stub.o
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index f4b21f2..c600811 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -655,7 +655,7 @@
/* & ~0x80, ignore enabled/disabled bit */
if ((type & ~0x80) != dmi_devices[i].type)
continue;
- if (strcmp(name, dmi_devices[i].name))
+ if (strcasecmp(name, dmi_devices[i].name))
continue;
memset(&info, 0, sizeof(struct i2c_board_info));
@@ -704,9 +704,6 @@
{
unsigned char temp;
int err, i;
-#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
- const char *vendor;
-#endif
I801_dev = dev;
i801_features = 0;
@@ -808,8 +805,7 @@
}
#endif
#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
- vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
- if (vendor && !strcmp(vendor, "FUJITSU SIEMENS"))
+ if (dmi_name_in_vendors("FUJITSU"))
dmi_walk(dmi_check_onboard_devices, &i801_adapter);
#endif
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index 3d76a18..0fe505d 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -94,7 +94,7 @@
}
break;
default:
- return -1; /* XXXKW better error code? */
+ return -EOPNOTSUPP;
}
while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
@@ -104,7 +104,7 @@
if (error & M_SMB_ERROR) {
/* Clear error bit by writing a 1 */
csr_out32(M_SMB_ERROR, SMB_CSR(adap, R_SMB_STATUS));
- return -1; /* XXXKW better error code? */
+ return (error & M_SMB_ERROR_TYPE) ? -EIO : -ENXIO;
}
if (data_bytes == 1)
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index e0f833c..0815e10 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -47,7 +47,6 @@
static DEFINE_IDR(i2c_adapter_idr);
static struct device_type i2c_client_type;
-static int i2c_check_addr(struct i2c_adapter *adapter, int addr);
static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver);
/* ------------------------------------------------------------------------- */
@@ -371,6 +370,59 @@
EXPORT_SYMBOL(i2c_verify_client);
+/* This is a permissive address validity check, I2C address map constraints
+ * are purposedly not enforced, except for the general call address. */
+static int i2c_check_client_addr_validity(const struct i2c_client *client)
+{
+ if (client->flags & I2C_CLIENT_TEN) {
+ /* 10-bit address, all values are valid */
+ if (client->addr > 0x3ff)
+ return -EINVAL;
+ } else {
+ /* 7-bit address, reject the general call address */
+ if (client->addr == 0x00 || client->addr > 0x7f)
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/* And this is a strict address validity check, used when probing. If a
+ * device uses a reserved address, then it shouldn't be probed. 7-bit
+ * addressing is assumed, 10-bit address devices are rare and should be
+ * explicitly enumerated. */
+static int i2c_check_addr_validity(unsigned short addr)
+{
+ /*
+ * Reserved addresses per I2C specification:
+ * 0x00 General call address / START byte
+ * 0x01 CBUS address
+ * 0x02 Reserved for different bus format
+ * 0x03 Reserved for future purposes
+ * 0x04-0x07 Hs-mode master code
+ * 0x78-0x7b 10-bit slave addressing
+ * 0x7c-0x7f Reserved for future purposes
+ */
+ if (addr < 0x08 || addr > 0x77)
+ return -EINVAL;
+ return 0;
+}
+
+static int __i2c_check_addr_busy(struct device *dev, void *addrp)
+{
+ struct i2c_client *client = i2c_verify_client(dev);
+ int addr = *(int *)addrp;
+
+ if (client && client->addr == addr)
+ return -EBUSY;
+ return 0;
+}
+
+static int i2c_check_addr_busy(struct i2c_adapter *adapter, int addr)
+{
+ return device_for_each_child(&adapter->dev, &addr,
+ __i2c_check_addr_busy);
+}
+
/**
* i2c_new_device - instantiate an i2c device
* @adap: the adapter managing the device
@@ -410,8 +462,16 @@
strlcpy(client->name, info->type, sizeof(client->name));
+ /* Check for address validity */
+ status = i2c_check_client_addr_validity(client);
+ if (status) {
+ dev_err(&adap->dev, "Invalid %d-bit I2C address 0x%02hx\n",
+ client->flags & I2C_CLIENT_TEN ? 10 : 7, client->addr);
+ goto out_err_silent;
+ }
+
/* Check for address business */
- status = i2c_check_addr(adap, client->addr);
+ status = i2c_check_addr_busy(adap, client->addr);
if (status)
goto out_err;
@@ -436,6 +496,7 @@
out_err:
dev_err(&adap->dev, "Failed to register i2c client %s at 0x%02x "
"(%d)\n", client->name, client->addr, status);
+out_err_silent:
kfree(client);
return NULL;
}
@@ -561,15 +622,9 @@
return -EINVAL;
}
- if (info.addr < 0x03 || info.addr > 0x77) {
- dev_err(dev, "%s: Invalid I2C address 0x%hx\n", "new_device",
- info.addr);
- return -EINVAL;
- }
-
client = i2c_new_device(adap, &info);
if (!client)
- return -EEXIST;
+ return -EINVAL;
/* Keep track of the added device */
i2c_lock_adapter(adap);
@@ -1024,21 +1079,6 @@
/* ------------------------------------------------------------------------- */
-static int __i2c_check_addr(struct device *dev, void *addrp)
-{
- struct i2c_client *client = i2c_verify_client(dev);
- int addr = *(int *)addrp;
-
- if (client && client->addr == addr)
- return -EBUSY;
- return 0;
-}
-
-static int i2c_check_addr(struct i2c_adapter *adapter, int addr)
-{
- return device_for_each_child(&adapter->dev, &addr, __i2c_check_addr);
-}
-
/**
* i2c_use_client - increments the reference count of the i2c client structure
* @client: the client being referenced
@@ -1277,6 +1317,41 @@
* ----------------------------------------------------
*/
+/*
+ * Legacy default probe function, mostly relevant for SMBus. The default
+ * probe method is a quick write, but it is known to corrupt the 24RF08
+ * EEPROMs due to a state machine bug, and could also irreversibly
+ * write-protect some EEPROMs, so for address ranges 0x30-0x37 and 0x50-0x5f,
+ * we use a short byte read instead. Also, some bus drivers don't implement
+ * quick write, so we fallback to a byte read in that case too.
+ * On x86, there is another special case for FSC hardware monitoring chips,
+ * which want regular byte reads (address 0x73.) Fortunately, these are the
+ * only known chips using this I2C address on PC hardware.
+ * Returns 1 if probe succeeded, 0 if not.
+ */
+static int i2c_default_probe(struct i2c_adapter *adap, unsigned short addr)
+{
+ int err;
+ union i2c_smbus_data dummy;
+
+#ifdef CONFIG_X86
+ if (addr == 0x73 && (adap->class & I2C_CLASS_HWMON)
+ && i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE_DATA))
+ err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
+ I2C_SMBUS_BYTE_DATA, &dummy);
+ else
+#endif
+ if ((addr & ~0x07) == 0x30 || (addr & ~0x0f) == 0x50
+ || !i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK))
+ err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
+ I2C_SMBUS_BYTE, &dummy);
+ else
+ err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_WRITE, 0,
+ I2C_SMBUS_QUICK, NULL);
+
+ return err >= 0;
+}
+
static int i2c_detect_address(struct i2c_client *temp_client,
struct i2c_driver *driver)
{
@@ -1286,34 +1361,20 @@
int err;
/* Make sure the address is valid */
- if (addr < 0x03 || addr > 0x77) {
+ err = i2c_check_addr_validity(addr);
+ if (err) {
dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n",
addr);
- return -EINVAL;
+ return err;
}
/* Skip if already in use */
- if (i2c_check_addr(adapter, addr))
+ if (i2c_check_addr_busy(adapter, addr))
return 0;
/* Make sure there is something at this address */
- if (addr == 0x73 && (adapter->class & I2C_CLASS_HWMON)) {
- /* Special probe for FSC hwmon chips */
- union i2c_smbus_data dummy;
-
- if (i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_READ, 0,
- I2C_SMBUS_BYTE_DATA, &dummy) < 0)
- return 0;
- } else {
- if (i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_WRITE, 0,
- I2C_SMBUS_QUICK, NULL) < 0)
- return 0;
-
- /* Prevent 24RF08 corruption */
- if ((addr & ~0x0f) == 0x50)
- i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_WRITE, 0,
- I2C_SMBUS_QUICK, NULL);
- }
+ if (!i2c_default_probe(adapter, addr))
+ return 0;
/* Finally call the custom detection function */
memset(&info, 0, sizeof(struct i2c_board_info));
@@ -1367,13 +1428,12 @@
if (!(adapter->class & driver->class))
goto exit_free;
- /* Stop here if we can't use SMBUS_QUICK */
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
+ /* Stop here if the bus doesn't support probing */
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE)) {
if (address_list[0] == I2C_CLIENT_END)
goto exit_free;
- dev_warn(&adapter->dev, "SMBus Quick command not supported, "
- "can't probe for chips\n");
+ dev_warn(&adapter->dev, "Probing not supported\n");
err = -EOPNOTSUPP;
goto exit_free;
}
@@ -1407,42 +1467,22 @@
for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) {
/* Check address validity */
- if (addr_list[i] < 0x03 || addr_list[i] > 0x77) {
+ if (i2c_check_addr_validity(addr_list[i]) < 0) {
dev_warn(&adap->dev, "Invalid 7-bit address "
"0x%02x\n", addr_list[i]);
continue;
}
/* Check address availability */
- if (i2c_check_addr(adap, addr_list[i])) {
+ if (i2c_check_addr_busy(adap, addr_list[i])) {
dev_dbg(&adap->dev, "Address 0x%02x already in "
"use, not probing\n", addr_list[i]);
continue;
}
- /* Test address responsiveness
- The default probe method is a quick write, but it is known
- to corrupt the 24RF08 EEPROMs due to a state machine bug,
- and could also irreversibly write-protect some EEPROMs, so
- for address ranges 0x30-0x37 and 0x50-0x5f, we use a byte
- read instead. Also, some bus drivers don't implement
- quick write, so we fallback to a byte read it that case
- too. */
- if ((addr_list[i] & ~0x07) == 0x30
- || (addr_list[i] & ~0x0f) == 0x50
- || !i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK)) {
- union i2c_smbus_data data;
-
- if (i2c_smbus_xfer(adap, addr_list[i], 0,
- I2C_SMBUS_READ, 0,
- I2C_SMBUS_BYTE, &data) >= 0)
- break;
- } else {
- if (i2c_smbus_xfer(adap, addr_list[i], 0,
- I2C_SMBUS_WRITE, 0,
- I2C_SMBUS_QUICK, NULL) >= 0)
- break;
- }
+ /* Test address responsiveness */
+ if (i2c_default_probe(adap, addr_list[i]))
+ break;
}
if (addr_list[i] == I2C_CLIENT_END) {
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index a24e0bf..f61ccc1 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -173,7 +173,6 @@
cancel_work_sync(&alert->alert);
- i2c_set_clientdata(ara, NULL);
kfree(alert);
return 0;
}
diff --git a/drivers/ide/gayle.c b/drivers/ide/gayle.c
index b9e517d..3feaa26 100644
--- a/drivers/ide/gayle.c
+++ b/drivers/ide/gayle.c
@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/zorro.h>
#include <linux/module.h>
+#include <linux/platform_device.h>
#include <asm/setup.h>
#include <asm/amigahw.h>
@@ -24,15 +25,6 @@
/*
- * Bases of the IDE interfaces
- */
-
-#define GAYLE_BASE_4000 0xdd2020 /* A4000/A4000T */
-#define GAYLE_BASE_1200 0xda0000 /* A1200/A600 and E-Matrix 530 */
-
-#define GAYLE_IDEREG_SIZE 0x2000
-
- /*
* Offsets from one of the above bases
*/
@@ -68,20 +60,20 @@
static int gayle_test_irq(ide_hwif_t *hwif)
{
- unsigned char ch;
+ unsigned char ch;
- ch = z_readb(hwif->io_ports.irq_addr);
- if (!(ch & GAYLE_IRQ_IDE))
- return 0;
- return 1;
+ ch = z_readb(hwif->io_ports.irq_addr);
+ if (!(ch & GAYLE_IRQ_IDE))
+ return 0;
+ return 1;
}
static void gayle_a1200_clear_irq(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
+ ide_hwif_t *hwif = drive->hwif;
- (void)z_readb(hwif->io_ports.status_addr);
- z_writeb(0x7c, hwif->io_ports.irq_addr);
+ (void)z_readb(hwif->io_ports.status_addr);
+ z_writeb(0x7c, hwif->io_ports.irq_addr);
}
static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base,
@@ -122,64 +114,89 @@
* Probe for a Gayle IDE interface (and optionally for an IDE doubler)
*/
-static int __init gayle_init(void)
+static int __init amiga_gayle_ide_probe(struct platform_device *pdev)
{
- unsigned long phys_base, res_start, res_n;
- unsigned long base, ctrlport, irqport;
- int a4000, i, rc;
- struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS];
- struct ide_port_info d = gayle_port_info;
+ struct resource *res;
+ struct gayle_ide_platform_data *pdata;
+ unsigned long base, ctrlport, irqport;
+ unsigned int i;
+ int error;
+ struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS];
+ struct ide_port_info d = gayle_port_info;
+ struct ide_host *host;
- if (!MACH_IS_AMIGA)
- return -ENODEV;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
- if ((a4000 = AMIGAHW_PRESENT(A4000_IDE)) || AMIGAHW_PRESENT(A1200_IDE))
- goto found;
-
-#ifdef CONFIG_ZORRO
- if (zorro_find_device(ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE,
- NULL))
- goto found;
-#endif
- return -ENODEV;
-
-found:
- printk(KERN_INFO "ide: Gayle IDE controller (A%d style%s)\n",
- a4000 ? 4000 : 1200,
- ide_doubler ? ", IDE doubler" : "");
-
- if (a4000) {
- phys_base = GAYLE_BASE_4000;
- irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_4000);
- d.port_ops = &gayle_a4000_port_ops;
- } else {
- phys_base = GAYLE_BASE_1200;
- irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_1200);
- d.port_ops = &gayle_a1200_port_ops;
- }
-
- res_start = ((unsigned long)phys_base) & ~(GAYLE_NEXT_PORT-1);
- res_n = GAYLE_IDEREG_SIZE;
-
- if (!request_mem_region(res_start, res_n, "IDE"))
+ if (!request_mem_region(res->start, resource_size(res), "IDE"))
return -EBUSY;
- for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) {
- base = (unsigned long)ZTWO_VADDR(phys_base + i * GAYLE_NEXT_PORT);
- ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0;
+ pdata = pdev->dev.platform_data;
+ pr_info("ide: Gayle IDE controller (A%u style%s)\n",
+ pdata->explicit_ack ? 1200 : 4000,
+ ide_doubler ? ", IDE doubler" : "");
- gayle_setup_ports(&hw[i], base, ctrlport, irqport);
+ base = (unsigned long)ZTWO_VADDR(pdata->base);
+ ctrlport = 0;
+ irqport = (unsigned long)ZTWO_VADDR(pdata->irqport);
+ if (pdata->explicit_ack)
+ d.port_ops = &gayle_a1200_port_ops;
+ else
+ d.port_ops = &gayle_a4000_port_ops;
- hws[i] = &hw[i];
- }
+ for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++, base += GAYLE_NEXT_PORT) {
+ if (GAYLE_HAS_CONTROL_REG)
+ ctrlport = base + GAYLE_CONTROL;
- rc = ide_host_add(&d, hws, i, NULL);
- if (rc)
- release_mem_region(res_start, res_n);
+ gayle_setup_ports(&hw[i], base, ctrlport, irqport);
+ hws[i] = &hw[i];
+ }
- return rc;
+ error = ide_host_add(&d, hws, i, &host);
+ if (error)
+ goto out;
+
+ platform_set_drvdata(pdev, host);
+ return 0;
+
+out:
+ release_mem_region(res->start, resource_size(res));
+ return error;
}
-module_init(gayle_init);
+static int __exit amiga_gayle_ide_remove(struct platform_device *pdev)
+{
+ struct ide_host *host = platform_get_drvdata(pdev);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ ide_host_remove(host);
+ release_mem_region(res->start, resource_size(res));
+ return 0;
+}
+
+static struct platform_driver amiga_gayle_ide_driver = {
+ .remove = __exit_p(amiga_gayle_ide_remove),
+ .driver = {
+ .name = "amiga-gayle-ide",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init amiga_gayle_ide_init(void)
+{
+ return platform_driver_probe(&amiga_gayle_ide_driver,
+ amiga_gayle_ide_probe);
+}
+
+module_init(amiga_gayle_ide_init);
+
+static void __exit amiga_gayle_ide_exit(void)
+{
+ platform_driver_unregister(&amiga_gayle_ide_driver);
+}
+
+module_exit(amiga_gayle_ide_exit);
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:amiga-gayle-ide");
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index 183fa38..ebcf8e4 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -1400,8 +1400,11 @@
static struct macio_driver pmac_ide_macio_driver =
{
- .name = "ide-pmac",
- .match_table = pmac_ide_macio_match,
+ .driver = {
+ .name = "ide-pmac",
+ .owner = THIS_MODULE,
+ .of_match_table = pmac_ide_macio_match,
+ },
.probe = pmac_ide_macio_attach,
.suspend = pmac_ide_macio_suspend,
.resume = pmac_ide_macio_resume,
diff --git a/drivers/idle/Kconfig b/drivers/idle/Kconfig
index f15e90a..fb5c518 100644
--- a/drivers/idle/Kconfig
+++ b/drivers/idle/Kconfig
@@ -1,3 +1,14 @@
+config INTEL_IDLE
+ tristate "Cpuidle Driver for Intel Processors"
+ depends on CPU_IDLE
+ depends on X86
+ depends on CPU_SUP_INTEL
+ depends on EXPERIMENTAL
+ help
+ Enable intel_idle, a cpuidle driver that includes knowledge of
+ native Intel hardware idle features. The acpi_idle driver
+ can be configured at the same time, in order to handle
+ processors intel_idle does not support.
menu "Memory power savings"
depends on X86_64
diff --git a/drivers/idle/Makefile b/drivers/idle/Makefile
index 5f68fc3..23d295c 100644
--- a/drivers/idle/Makefile
+++ b/drivers/idle/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_I7300_IDLE) += i7300_idle.o
+obj-$(CONFIG_INTEL_IDLE) += intel_idle.o
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
new file mode 100755
index 0000000..54f0fb4
--- /dev/null
+++ b/drivers/idle/intel_idle.c
@@ -0,0 +1,461 @@
+/*
+ * intel_idle.c - native hardware idle loop for modern Intel processors
+ *
+ * Copyright (c) 2010, Intel Corporation.
+ * Len Brown <len.brown@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+/*
+ * intel_idle is a cpuidle driver that loads on specific Intel processors
+ * in lieu of the legacy ACPI processor_idle driver. The intent is to
+ * make Linux more efficient on these processors, as intel_idle knows
+ * more than ACPI, as well as make Linux more immune to ACPI BIOS bugs.
+ */
+
+/*
+ * Design Assumptions
+ *
+ * All CPUs have same idle states as boot CPU
+ *
+ * Chipset BM_STS (bus master status) bit is a NOP
+ * for preventing entry into deep C-stats
+ */
+
+/*
+ * Known limitations
+ *
+ * The driver currently initializes for_each_online_cpu() upon modprobe.
+ * It it unaware of subsequent processors hot-added to the system.
+ * This means that if you boot with maxcpus=n and later online
+ * processors above n, those processors will use C1 only.
+ *
+ * ACPI has a .suspend hack to turn off deep c-statees during suspend
+ * to avoid complications with the lapic timer workaround.
+ * Have not seen issues with suspend, but may need same workaround here.
+ *
+ * There is currently no kernel-based automatic probing/loading mechanism
+ * if the driver is built as a module.
+ */
+
+/* un-comment DEBUG to enable pr_debug() statements */
+#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/cpuidle.h>
+#include <linux/clockchips.h>
+#include <linux/hrtimer.h> /* ktime_get_real() */
+#include <trace/events/power.h>
+#include <linux/sched.h>
+
+#define INTEL_IDLE_VERSION "0.4"
+#define PREFIX "intel_idle: "
+
+#define MWAIT_SUBSTATE_MASK (0xf)
+#define MWAIT_CSTATE_MASK (0xf)
+#define MWAIT_SUBSTATE_SIZE (4)
+#define MWAIT_MAX_NUM_CSTATES 8
+#define CPUID_MWAIT_LEAF (5)
+#define CPUID5_ECX_EXTENSIONS_SUPPORTED (0x1)
+#define CPUID5_ECX_INTERRUPT_BREAK (0x2)
+
+static struct cpuidle_driver intel_idle_driver = {
+ .name = "intel_idle",
+ .owner = THIS_MODULE,
+};
+/* intel_idle.max_cstate=0 disables driver */
+static int max_cstate = MWAIT_MAX_NUM_CSTATES - 1;
+static int power_policy = 7; /* 0 = max perf; 15 = max powersave */
+
+static unsigned int substates;
+static int (*choose_substate)(int);
+
+/* Reliable LAPIC Timer States, bit 1 for C1 etc. */
+static unsigned int lapic_timer_reliable_states;
+
+static struct cpuidle_device *intel_idle_cpuidle_devices;
+static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state);
+
+static struct cpuidle_state *cpuidle_state_table;
+
+/*
+ * States are indexed by the cstate number,
+ * which is also the index into the MWAIT hint array.
+ * Thus C0 is a dummy.
+ */
+static struct cpuidle_state nehalem_cstates[MWAIT_MAX_NUM_CSTATES] = {
+ { /* MWAIT C0 */ },
+ { /* MWAIT C1 */
+ .name = "NHM-C1",
+ .desc = "MWAIT 0x00",
+ .driver_data = (void *) 0x00,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 3,
+ .power_usage = 1000,
+ .target_residency = 6,
+ .enter = &intel_idle },
+ { /* MWAIT C2 */
+ .name = "NHM-C3",
+ .desc = "MWAIT 0x10",
+ .driver_data = (void *) 0x10,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 20,
+ .power_usage = 500,
+ .target_residency = 80,
+ .enter = &intel_idle },
+ { /* MWAIT C3 */
+ .name = "NHM-C6",
+ .desc = "MWAIT 0x20",
+ .driver_data = (void *) 0x20,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 200,
+ .power_usage = 350,
+ .target_residency = 800,
+ .enter = &intel_idle },
+};
+
+static struct cpuidle_state atom_cstates[MWAIT_MAX_NUM_CSTATES] = {
+ { /* MWAIT C0 */ },
+ { /* MWAIT C1 */
+ .name = "ATM-C1",
+ .desc = "MWAIT 0x00",
+ .driver_data = (void *) 0x00,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 1,
+ .power_usage = 1000,
+ .target_residency = 4,
+ .enter = &intel_idle },
+ { /* MWAIT C2 */
+ .name = "ATM-C2",
+ .desc = "MWAIT 0x10",
+ .driver_data = (void *) 0x10,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 20,
+ .power_usage = 500,
+ .target_residency = 80,
+ .enter = &intel_idle },
+ { /* MWAIT C3 */ },
+ { /* MWAIT C4 */
+ .name = "ATM-C4",
+ .desc = "MWAIT 0x30",
+ .driver_data = (void *) 0x30,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 100,
+ .power_usage = 250,
+ .target_residency = 400,
+ .enter = &intel_idle },
+ { /* MWAIT C5 */ },
+ { /* MWAIT C6 */
+ .name = "ATM-C6",
+ .desc = "MWAIT 0x40",
+ .driver_data = (void *) 0x40,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 200,
+ .power_usage = 150,
+ .target_residency = 800,
+ .enter = NULL }, /* disabled */
+};
+
+/*
+ * choose_tunable_substate()
+ *
+ * Run-time decision on which C-state substate to invoke
+ * If power_policy = 0, choose shallowest substate (0)
+ * If power_policy = 15, choose deepest substate
+ * If power_policy = middle, choose middle substate etc.
+ */
+static int choose_tunable_substate(int cstate)
+{
+ unsigned int num_substates;
+ unsigned int substate_choice;
+
+ power_policy &= 0xF; /* valid range: 0-15 */
+ cstate &= 7; /* valid range: 0-7 */
+
+ num_substates = (substates >> ((cstate) * 4)) & MWAIT_SUBSTATE_MASK;
+
+ if (num_substates <= 1)
+ return 0;
+
+ substate_choice = ((power_policy + (power_policy + 1) *
+ (num_substates - 1)) / 16);
+
+ return substate_choice;
+}
+
+/*
+ * choose_zero_substate()
+ */
+static int choose_zero_substate(int cstate)
+{
+ return 0;
+}
+
+/**
+ * intel_idle
+ * @dev: cpuidle_device
+ * @state: cpuidle state
+ *
+ */
+static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state)
+{
+ unsigned long ecx = 1; /* break on interrupt flag */
+ unsigned long eax = (unsigned long)cpuidle_get_statedata(state);
+ unsigned int cstate;
+ ktime_t kt_before, kt_after;
+ s64 usec_delta;
+ int cpu = smp_processor_id();
+
+ cstate = (((eax) >> MWAIT_SUBSTATE_SIZE) & MWAIT_CSTATE_MASK) + 1;
+
+ eax = eax + (choose_substate)(cstate);
+
+ local_irq_disable();
+
+ if (!(lapic_timer_reliable_states & (1 << (cstate))))
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
+
+ kt_before = ktime_get_real();
+
+ stop_critical_timings();
+#ifndef MODULE
+ trace_power_start(POWER_CSTATE, (eax >> 4) + 1);
+#endif
+ if (!need_resched()) {
+
+ __monitor((void *)¤t_thread_info()->flags, 0, 0);
+ smp_mb();
+ if (!need_resched())
+ __mwait(eax, ecx);
+ }
+
+ start_critical_timings();
+
+ kt_after = ktime_get_real();
+ usec_delta = ktime_to_us(ktime_sub(kt_after, kt_before));
+
+ local_irq_enable();
+
+ if (!(lapic_timer_reliable_states & (1 << (cstate))))
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
+
+ return usec_delta;
+}
+
+/*
+ * intel_idle_probe()
+ */
+static int intel_idle_probe(void)
+{
+ unsigned int eax, ebx, ecx, edx;
+
+ if (max_cstate == 0) {
+ pr_debug(PREFIX "disabled\n");
+ return -EPERM;
+ }
+
+ if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
+ return -ENODEV;
+
+ if (!boot_cpu_has(X86_FEATURE_MWAIT))
+ return -ENODEV;
+
+ if (boot_cpu_data.cpuid_level < CPUID_MWAIT_LEAF)
+ return -ENODEV;
+
+ cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &edx);
+
+ if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED) ||
+ !(ecx & CPUID5_ECX_INTERRUPT_BREAK))
+ return -ENODEV;
+#ifdef DEBUG
+ if (substates == 0) /* can over-ride via modparam */
+#endif
+ substates = edx;
+
+ pr_debug(PREFIX "MWAIT substates: 0x%x\n", substates);
+
+ if (boot_cpu_has(X86_FEATURE_ARAT)) /* Always Reliable APIC Timer */
+ lapic_timer_reliable_states = 0xFFFFFFFF;
+
+ if (boot_cpu_data.x86 != 6) /* family 6 */
+ return -ENODEV;
+
+ switch (boot_cpu_data.x86_model) {
+
+ case 0x1A: /* Core i7, Xeon 5500 series */
+ case 0x1E: /* Core i7 and i5 Processor - Lynnfield Jasper Forest */
+ case 0x1F: /* Core i7 and i5 Processor - Nehalem */
+ case 0x2E: /* Nehalem-EX Xeon */
+ lapic_timer_reliable_states = (1 << 1); /* C1 */
+
+ case 0x25: /* Westmere */
+ case 0x2C: /* Westmere */
+ cpuidle_state_table = nehalem_cstates;
+ choose_substate = choose_tunable_substate;
+ break;
+
+ case 0x1C: /* 28 - Atom Processor */
+ lapic_timer_reliable_states = (1 << 2) | (1 << 1); /* C2, C1 */
+ cpuidle_state_table = atom_cstates;
+ choose_substate = choose_zero_substate;
+ break;
+#ifdef FUTURE_USE
+ case 0x17: /* 23 - Core 2 Duo */
+ lapic_timer_reliable_states = (1 << 2) | (1 << 1); /* C2, C1 */
+#endif
+
+ default:
+ pr_debug(PREFIX "does not run on family %d model %d\n",
+ boot_cpu_data.x86, boot_cpu_data.x86_model);
+ return -ENODEV;
+ }
+
+ pr_debug(PREFIX "v" INTEL_IDLE_VERSION
+ " model 0x%X\n", boot_cpu_data.x86_model);
+
+ pr_debug(PREFIX "lapic_timer_reliable_states 0x%x\n",
+ lapic_timer_reliable_states);
+ return 0;
+}
+
+/*
+ * intel_idle_cpuidle_devices_uninit()
+ * unregister, free cpuidle_devices
+ */
+static void intel_idle_cpuidle_devices_uninit(void)
+{
+ int i;
+ struct cpuidle_device *dev;
+
+ for_each_online_cpu(i) {
+ dev = per_cpu_ptr(intel_idle_cpuidle_devices, i);
+ cpuidle_unregister_device(dev);
+ }
+
+ free_percpu(intel_idle_cpuidle_devices);
+ return;
+}
+/*
+ * intel_idle_cpuidle_devices_init()
+ * allocate, initialize, register cpuidle_devices
+ */
+static int intel_idle_cpuidle_devices_init(void)
+{
+ int i, cstate;
+ struct cpuidle_device *dev;
+
+ intel_idle_cpuidle_devices = alloc_percpu(struct cpuidle_device);
+ if (intel_idle_cpuidle_devices == NULL)
+ return -ENOMEM;
+
+ for_each_online_cpu(i) {
+ dev = per_cpu_ptr(intel_idle_cpuidle_devices, i);
+
+ dev->state_count = 1;
+
+ for (cstate = 1; cstate < MWAIT_MAX_NUM_CSTATES; ++cstate) {
+ int num_substates;
+
+ if (cstate > max_cstate) {
+ printk(PREFIX "max_cstate %d reached\n",
+ max_cstate);
+ break;
+ }
+
+ /* does the state exist in CPUID.MWAIT? */
+ num_substates = (substates >> ((cstate) * 4))
+ & MWAIT_SUBSTATE_MASK;
+ if (num_substates == 0)
+ continue;
+ /* is the state not enabled? */
+ if (cpuidle_state_table[cstate].enter == NULL) {
+ /* does the driver not know about the state? */
+ if (*cpuidle_state_table[cstate].name == '\0')
+ pr_debug(PREFIX "unaware of model 0x%x"
+ " MWAIT %d please"
+ " contact lenb@kernel.org",
+ boot_cpu_data.x86_model, cstate);
+ continue;
+ }
+
+ if ((cstate > 2) &&
+ !boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
+ mark_tsc_unstable("TSC halts in idle"
+ " states deeper than C2");
+
+ dev->states[dev->state_count] = /* structure copy */
+ cpuidle_state_table[cstate];
+
+ dev->state_count += 1;
+ }
+
+ dev->cpu = i;
+ if (cpuidle_register_device(dev)) {
+ pr_debug(PREFIX "cpuidle_register_device %d failed!\n",
+ i);
+ intel_idle_cpuidle_devices_uninit();
+ return -EIO;
+ }
+ }
+
+ return 0;
+}
+
+
+static int __init intel_idle_init(void)
+{
+ int retval;
+
+ retval = intel_idle_probe();
+ if (retval)
+ return retval;
+
+ retval = cpuidle_register_driver(&intel_idle_driver);
+ if (retval) {
+ printk(KERN_DEBUG PREFIX "intel_idle yielding to %s",
+ cpuidle_get_driver()->name);
+ return retval;
+ }
+
+ retval = intel_idle_cpuidle_devices_init();
+ if (retval) {
+ cpuidle_unregister_driver(&intel_idle_driver);
+ return retval;
+ }
+
+ return 0;
+}
+
+static void __exit intel_idle_exit(void)
+{
+ intel_idle_cpuidle_devices_uninit();
+ cpuidle_unregister_driver(&intel_idle_driver);
+
+ return;
+}
+
+module_init(intel_idle_init);
+module_exit(intel_idle_exit);
+
+module_param(power_policy, int, 0644);
+module_param(max_cstate, int, 0444);
+#ifdef DEBUG
+module_param(substates, int, 0444);
+#endif
+
+MODULE_AUTHOR("Len Brown <len.brown@intel.com>");
+MODULE_DESCRIPTION("Cpuidle driver for Intel Hardware v" INTEL_IDLE_VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c
index 9fd4a0d..adaefab 100644
--- a/drivers/ieee1394/dv1394.c
+++ b/drivers/ieee1394/dv1394.c
@@ -1824,7 +1824,7 @@
"and will not be available in the new firewire driver stack. "
"Try libraw1394 based programs instead.\n", current->comm);
- return 0;
+ return nonseekable_open(inode, file);
}
@@ -2153,17 +2153,18 @@
static const struct file_operations dv1394_fops=
{
.owner = THIS_MODULE,
- .poll = dv1394_poll,
+ .poll = dv1394_poll,
.unlocked_ioctl = dv1394_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = dv1394_compat_ioctl,
#endif
.mmap = dv1394_mmap,
.open = dv1394_open,
- .write = dv1394_write,
- .read = dv1394_read,
+ .write = dv1394_write,
+ .read = dv1394_read,
.release = dv1394_release,
- .fasync = dv1394_fasync,
+ .fasync = dv1394_fasync,
+ .llseek = no_llseek,
};
diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c
index 8aa56ac..b563d5e 100644
--- a/drivers/ieee1394/raw1394.c
+++ b/drivers/ieee1394/raw1394.c
@@ -2834,7 +2834,7 @@
file->private_data = fi;
- return 0;
+ return nonseekable_open(inode, file);
}
static int raw1394_release(struct inode *inode, struct file *file)
@@ -3035,6 +3035,7 @@
.poll = raw1394_poll,
.open = raw1394_open,
.release = raw1394_release,
+ .llseek = no_llseek,
};
static int __init init_raw1394(void)
diff --git a/drivers/ieee1394/video1394.c b/drivers/ieee1394/video1394.c
index 949064a..a42bd68 100644
--- a/drivers/ieee1394/video1394.c
+++ b/drivers/ieee1394/video1394.c
@@ -1239,7 +1239,7 @@
ctx->current_ctx = NULL;
file->private_data = ctx;
- return 0;
+ return nonseekable_open(inode, file);
}
static int video1394_release(struct inode *inode, struct file *file)
@@ -1287,7 +1287,8 @@
.poll = video1394_poll,
.mmap = video1394_mmap,
.open = video1394_open,
- .release = video1394_release
+ .release = video1394_release,
+ .llseek = no_llseek,
};
/*** HOTPLUG STUFF **********************************************************/
diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c
index 4647484..08f948d 100644
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -706,14 +706,9 @@
if (!len)
return 0;
- data = kmalloc(len, GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- if (copy_from_user(data, (void __user *)(unsigned long)src, len)) {
- kfree(data);
- return -EFAULT;
- }
+ data = memdup_user((void __user *)(unsigned long)src, len);
+ if (IS_ERR(data))
+ return PTR_ERR(data);
*dest = data;
return 0;
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 30ce0a8..855ee44 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -969,7 +969,8 @@
goto err;
goto out;
err:
- abort_connection(ep, skb, GFP_KERNEL);
+ state_set(&ep->com, ABORTING);
+ send_abort(ep, skb, GFP_KERNEL);
out:
connect_reply_upcall(ep, err);
return;
@@ -1372,7 +1373,7 @@
pdev, 0);
mtu = pdev->mtu;
tx_chan = cxgb4_port_chan(pdev);
- smac_idx = tx_chan << 1;
+ smac_idx = (cxgb4_port_viid(pdev) & 0x7F) << 1;
step = dev->rdev.lldi.ntxq / dev->rdev.lldi.nchan;
txq_idx = cxgb4_port_idx(pdev) * step;
step = dev->rdev.lldi.nrxq / dev->rdev.lldi.nchan;
@@ -1383,7 +1384,7 @@
dst->neighbour->dev, 0);
mtu = dst_mtu(dst);
tx_chan = cxgb4_port_chan(dst->neighbour->dev);
- smac_idx = tx_chan << 1;
+ smac_idx = (cxgb4_port_viid(dst->neighbour->dev) & 0x7F) << 1;
step = dev->rdev.lldi.ntxq / dev->rdev.lldi.nchan;
txq_idx = cxgb4_port_idx(dst->neighbour->dev) * step;
step = dev->rdev.lldi.nrxq / dev->rdev.lldi.nchan;
@@ -1950,7 +1951,7 @@
pdev, 0);
ep->mtu = pdev->mtu;
ep->tx_chan = cxgb4_port_chan(pdev);
- ep->smac_idx = ep->tx_chan << 1;
+ ep->smac_idx = (cxgb4_port_viid(pdev) & 0x7F) << 1;
step = ep->com.dev->rdev.lldi.ntxq /
ep->com.dev->rdev.lldi.nchan;
ep->txq_idx = cxgb4_port_idx(pdev) * step;
@@ -1965,7 +1966,8 @@
ep->dst->neighbour->dev, 0);
ep->mtu = dst_mtu(ep->dst);
ep->tx_chan = cxgb4_port_chan(ep->dst->neighbour->dev);
- ep->smac_idx = ep->tx_chan << 1;
+ ep->smac_idx = (cxgb4_port_viid(ep->dst->neighbour->dev) &
+ 0x7F) << 1;
step = ep->com.dev->rdev.lldi.ntxq /
ep->com.dev->rdev.lldi.nchan;
ep->txq_idx = cxgb4_port_idx(ep->dst->neighbour->dev) * step;
diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c
index 2447f52..fac5c6e 100644
--- a/drivers/infiniband/hw/cxgb4/cq.c
+++ b/drivers/infiniband/hw/cxgb4/cq.c
@@ -77,7 +77,7 @@
kfree(cq->sw_queue);
dma_free_coherent(&(rdev->lldi.pdev->dev),
cq->memsize, cq->queue,
- pci_unmap_addr(cq, mapping));
+ dma_unmap_addr(cq, mapping));
c4iw_put_cqid(rdev, cq->cqid, uctx);
return ret;
}
@@ -112,7 +112,7 @@
ret = -ENOMEM;
goto err3;
}
- pci_unmap_addr_set(cq, mapping, cq->dma_addr);
+ dma_unmap_addr_set(cq, mapping, cq->dma_addr);
memset(cq->queue, 0, cq->memsize);
/* build fw_ri_res_wr */
@@ -179,7 +179,7 @@
return 0;
err4:
dma_free_coherent(&rdev->lldi.pdev->dev, cq->memsize, cq->queue,
- pci_unmap_addr(cq, mapping));
+ dma_unmap_addr(cq, mapping));
err3:
kfree(cq->sw_queue);
err2:
@@ -764,7 +764,7 @@
struct c4iw_create_cq_resp uresp;
struct c4iw_ucontext *ucontext = NULL;
int ret;
- size_t memsize;
+ size_t memsize, hwentries;
struct c4iw_mm_entry *mm, *mm2;
PDBG("%s ib_dev %p entries %d\n", __func__, ibdev, entries);
@@ -788,14 +788,29 @@
* entries must be multiple of 16 for HW.
*/
entries = roundup(entries, 16);
- memsize = entries * sizeof *chp->cq.queue;
+
+ /*
+ * Make actual HW queue 2x to avoid cdix_inc overflows.
+ */
+ hwentries = entries * 2;
+
+ /*
+ * Make HW queue at least 64 entries so GTS updates aren't too
+ * frequent.
+ */
+ if (hwentries < 64)
+ hwentries = 64;
+
+ memsize = hwentries * sizeof *chp->cq.queue;
/*
* memsize must be a multiple of the page size if its a user cq.
*/
- if (ucontext)
+ if (ucontext) {
memsize = roundup(memsize, PAGE_SIZE);
- chp->cq.size = entries;
+ hwentries = memsize / sizeof *chp->cq.queue;
+ }
+ chp->cq.size = hwentries;
chp->cq.memsize = memsize;
ret = create_cq(&rhp->rdev, &chp->cq,
@@ -805,7 +820,7 @@
chp->rhp = rhp;
chp->cq.size--; /* status page */
- chp->ibcq.cqe = chp->cq.size - 1;
+ chp->ibcq.cqe = entries - 2;
spin_lock_init(&chp->lock);
atomic_set(&chp->refcnt, 1);
init_waitqueue_head(&chp->wait);
diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
index 277ab58..d33e1a6 100644
--- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
+++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
@@ -261,7 +261,7 @@
struct c4iw_fr_page_list {
struct ib_fast_reg_page_list ibpl;
- DECLARE_PCI_UNMAP_ADDR(mapping);
+ DEFINE_DMA_UNMAP_ADDR(mapping);
dma_addr_t dma_addr;
struct c4iw_dev *dev;
int size;
diff --git a/drivers/infiniband/hw/cxgb4/mem.c b/drivers/infiniband/hw/cxgb4/mem.c
index 7f94da1..82b5703 100644
--- a/drivers/infiniband/hw/cxgb4/mem.c
+++ b/drivers/infiniband/hw/cxgb4/mem.c
@@ -764,7 +764,7 @@
if (!c4pl)
return ERR_PTR(-ENOMEM);
- pci_unmap_addr_set(c4pl, mapping, dma_addr);
+ dma_unmap_addr_set(c4pl, mapping, dma_addr);
c4pl->dma_addr = dma_addr;
c4pl->dev = dev;
c4pl->size = size;
@@ -779,7 +779,7 @@
struct c4iw_fr_page_list *c4pl = to_c4iw_fr_page_list(ibpl);
dma_free_coherent(&c4pl->dev->rdev.lldi.pdev->dev, c4pl->size,
- c4pl, pci_unmap_addr(c4pl, mapping));
+ c4pl, dma_unmap_addr(c4pl, mapping));
}
int c4iw_dereg_mr(struct ib_mr *ib_mr)
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index 0c28ed1..7065cb3 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -40,10 +40,10 @@
*/
dma_free_coherent(&(rdev->lldi.pdev->dev),
wq->rq.memsize, wq->rq.queue,
- pci_unmap_addr(&wq->rq, mapping));
+ dma_unmap_addr(&wq->rq, mapping));
dma_free_coherent(&(rdev->lldi.pdev->dev),
wq->sq.memsize, wq->sq.queue,
- pci_unmap_addr(&wq->sq, mapping));
+ dma_unmap_addr(&wq->sq, mapping));
c4iw_rqtpool_free(rdev, wq->rq.rqt_hwaddr, wq->rq.rqt_size);
kfree(wq->rq.sw_rq);
kfree(wq->sq.sw_sq);
@@ -99,7 +99,7 @@
if (!wq->sq.queue)
goto err5;
memset(wq->sq.queue, 0, wq->sq.memsize);
- pci_unmap_addr_set(&wq->sq, mapping, wq->sq.dma_addr);
+ dma_unmap_addr_set(&wq->sq, mapping, wq->sq.dma_addr);
wq->rq.queue = dma_alloc_coherent(&(rdev->lldi.pdev->dev),
wq->rq.memsize, &(wq->rq.dma_addr),
@@ -112,7 +112,7 @@
wq->rq.queue,
(unsigned long long)virt_to_phys(wq->rq.queue));
memset(wq->rq.queue, 0, wq->rq.memsize);
- pci_unmap_addr_set(&wq->rq, mapping, wq->rq.dma_addr);
+ dma_unmap_addr_set(&wq->rq, mapping, wq->rq.dma_addr);
wq->db = rdev->lldi.db_reg;
wq->gts = rdev->lldi.gts_reg;
@@ -217,11 +217,11 @@
err7:
dma_free_coherent(&(rdev->lldi.pdev->dev),
wq->rq.memsize, wq->rq.queue,
- pci_unmap_addr(&wq->rq, mapping));
+ dma_unmap_addr(&wq->rq, mapping));
err6:
dma_free_coherent(&(rdev->lldi.pdev->dev),
wq->sq.memsize, wq->sq.queue,
- pci_unmap_addr(&wq->sq, mapping));
+ dma_unmap_addr(&wq->sq, mapping));
err5:
c4iw_rqtpool_free(rdev, wq->rq.rqt_hwaddr, wq->rq.rqt_size);
err4:
diff --git a/drivers/infiniband/hw/cxgb4/t4.h b/drivers/infiniband/hw/cxgb4/t4.h
index 1057cb9..9cf8d85 100644
--- a/drivers/infiniband/hw/cxgb4/t4.h
+++ b/drivers/infiniband/hw/cxgb4/t4.h
@@ -279,7 +279,7 @@
struct t4_sq {
union t4_wr *queue;
dma_addr_t dma_addr;
- DECLARE_PCI_UNMAP_ADDR(mapping);
+ DEFINE_DMA_UNMAP_ADDR(mapping);
struct t4_swsqe *sw_sq;
struct t4_swsqe *oldest_read;
u64 udb;
@@ -298,7 +298,7 @@
struct t4_rq {
union t4_recv_wr *queue;
dma_addr_t dma_addr;
- DECLARE_PCI_UNMAP_ADDR(mapping);
+ DEFINE_DMA_UNMAP_ADDR(mapping);
struct t4_swrqe *sw_rq;
u64 udb;
size_t memsize;
@@ -429,7 +429,7 @@
struct t4_cq {
struct t4_cqe *queue;
dma_addr_t dma_addr;
- DECLARE_PCI_UNMAP_ADDR(mapping);
+ DEFINE_DMA_UNMAP_ADDR(mapping);
struct t4_cqe *sw_queue;
void __iomem *gts;
struct c4iw_rdev *rdev;
diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c
index 07cae55..e571e60 100644
--- a/drivers/infiniband/hw/ehca/ehca_irq.c
+++ b/drivers/infiniband/hw/ehca/ehca_irq.c
@@ -847,7 +847,7 @@
ehca_gen_dbg("CPU: %x (CPU_PREPARE)", cpu);
if (!create_comp_task(pool, cpu)) {
ehca_gen_err("Can't create comp_task for cpu: %x", cpu);
- return NOTIFY_BAD;
+ return notifier_from_errno(-ENOMEM);
}
break;
case CPU_UP_CANCELED:
diff --git a/drivers/infiniband/hw/qib/Makefile b/drivers/infiniband/hw/qib/Makefile
index c6515a1..f12d7bb 100644
--- a/drivers/infiniband/hw/qib/Makefile
+++ b/drivers/infiniband/hw/qib/Makefile
@@ -6,7 +6,7 @@
qib_qp.o qib_qsfp.o qib_rc.o qib_ruc.o qib_sdma.o qib_srq.o \
qib_sysfs.o qib_twsi.o qib_tx.o qib_uc.o qib_ud.o \
qib_user_pages.o qib_user_sdma.o qib_verbs_mcast.o qib_iba7220.o \
- qib_sd7220.o qib_sd7220_img.o qib_iba7322.o qib_verbs.o
+ qib_sd7220.o qib_iba7322.o qib_verbs.o
# 6120 has no fallback if no MSI interrupts, others can do INTx
ib_qib-$(CONFIG_PCI_MSI) += qib_iba6120.o
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index 32d9208..3593983 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -686,6 +686,7 @@
void __iomem *piobase;
/* mem-mapped pointer to base of user chip regs (if using WC PAT) */
u64 __iomem *userbase;
+ void __iomem *piovl15base; /* base of VL15 buffers, if not WC */
/*
* points to area where PIOavail registers will be DMA'ed.
* Has to be on a page of it's own, because the page will be
diff --git a/drivers/infiniband/hw/qib/qib_7220.h b/drivers/infiniband/hw/qib/qib_7220.h
index ea0bfd8..21f374a 100644
--- a/drivers/infiniband/hw/qib/qib_7220.h
+++ b/drivers/infiniband/hw/qib/qib_7220.h
@@ -109,10 +109,6 @@
*/
int qib_sd7220_presets(struct qib_devdata *dd);
int qib_sd7220_init(struct qib_devdata *dd);
-int qib_sd7220_prog_ld(struct qib_devdata *dd, int sdnum, u8 *img,
- int len, int offset);
-int qib_sd7220_prog_vfy(struct qib_devdata *dd, int sdnum, const u8 *img,
- int len, int offset);
void qib_sd7220_clr_ibpar(struct qib_devdata *);
/*
* Below used for sdnum parameter, selecting one of the two sections
@@ -121,9 +117,6 @@
*/
#define IB_7220_SERDES 2
-int qib_sd7220_ib_load(struct qib_devdata *dd);
-int qib_sd7220_ib_vfy(struct qib_devdata *dd);
-
static inline u32 qib_read_kreg32(const struct qib_devdata *dd,
const u16 regno)
{
diff --git a/drivers/infiniband/hw/qib/qib_7322_regs.h b/drivers/infiniband/hw/qib/qib_7322_regs.h
index a97440b..32dc81f 100644
--- a/drivers/infiniband/hw/qib/qib_7322_regs.h
+++ b/drivers/infiniband/hw/qib/qib_7322_regs.h
@@ -742,15 +742,15 @@
#define QIB_7322_HwErrMask_IBCBusFromSPCParityErrMask_1_LSB 0xF
#define QIB_7322_HwErrMask_IBCBusFromSPCParityErrMask_1_MSB 0xF
#define QIB_7322_HwErrMask_IBCBusFromSPCParityErrMask_1_RMASK 0x1
-#define QIB_7322_HwErrMask_statusValidNoEopMask_1_LSB 0xE
-#define QIB_7322_HwErrMask_statusValidNoEopMask_1_MSB 0xE
-#define QIB_7322_HwErrMask_statusValidNoEopMask_1_RMASK 0x1
+#define QIB_7322_HwErrMask_IBCBusToSPCParityErrMask_1_LSB 0xE
+#define QIB_7322_HwErrMask_IBCBusToSPCParityErrMask_1_MSB 0xE
+#define QIB_7322_HwErrMask_IBCBusToSPCParityErrMask_1_RMASK 0x1
#define QIB_7322_HwErrMask_IBCBusFromSPCParityErrMask_0_LSB 0xD
#define QIB_7322_HwErrMask_IBCBusFromSPCParityErrMask_0_MSB 0xD
#define QIB_7322_HwErrMask_IBCBusFromSPCParityErrMask_0_RMASK 0x1
-#define QIB_7322_HwErrMask_statusValidNoEopMask_0_LSB 0xC
-#define QIB_7322_HwErrMask_statusValidNoEopMask_0_MSB 0xC
-#define QIB_7322_HwErrMask_statusValidNoEopMask_0_RMASK 0x1
+#define QIB_7322_HwErrMask_statusValidNoEopMask_LSB 0xC
+#define QIB_7322_HwErrMask_statusValidNoEopMask_MSB 0xC
+#define QIB_7322_HwErrMask_statusValidNoEopMask_RMASK 0x1
#define QIB_7322_HwErrMask_LATriggeredMask_LSB 0xB
#define QIB_7322_HwErrMask_LATriggeredMask_MSB 0xB
#define QIB_7322_HwErrMask_LATriggeredMask_RMASK 0x1
@@ -796,15 +796,15 @@
#define QIB_7322_HwErrStatus_IBCBusFromSPCParityErr_1_LSB 0xF
#define QIB_7322_HwErrStatus_IBCBusFromSPCParityErr_1_MSB 0xF
#define QIB_7322_HwErrStatus_IBCBusFromSPCParityErr_1_RMASK 0x1
-#define QIB_7322_HwErrStatus_statusValidNoEop_1_LSB 0xE
-#define QIB_7322_HwErrStatus_statusValidNoEop_1_MSB 0xE
-#define QIB_7322_HwErrStatus_statusValidNoEop_1_RMASK 0x1
+#define QIB_7322_HwErrStatus_IBCBusToSPCParityErr_1_LSB 0xE
+#define QIB_7322_HwErrStatus_IBCBusToSPCParityErr_1_MSB 0xE
+#define QIB_7322_HwErrStatus_IBCBusToSPCParityErr_1_RMASK 0x1
#define QIB_7322_HwErrStatus_IBCBusFromSPCParityErr_0_LSB 0xD
#define QIB_7322_HwErrStatus_IBCBusFromSPCParityErr_0_MSB 0xD
#define QIB_7322_HwErrStatus_IBCBusFromSPCParityErr_0_RMASK 0x1
-#define QIB_7322_HwErrStatus_statusValidNoEop_0_LSB 0xC
-#define QIB_7322_HwErrStatus_statusValidNoEop_0_MSB 0xC
-#define QIB_7322_HwErrStatus_statusValidNoEop_0_RMASK 0x1
+#define QIB_7322_HwErrStatus_statusValidNoEop_LSB 0xC
+#define QIB_7322_HwErrStatus_statusValidNoEop_MSB 0xC
+#define QIB_7322_HwErrStatus_statusValidNoEop_RMASK 0x1
#define QIB_7322_HwErrStatus_LATriggered_LSB 0xB
#define QIB_7322_HwErrStatus_LATriggered_MSB 0xB
#define QIB_7322_HwErrStatus_LATriggered_RMASK 0x1
@@ -850,15 +850,15 @@
#define QIB_7322_HwErrClear_IBCBusFromSPCParityErrClear_1_LSB 0xF
#define QIB_7322_HwErrClear_IBCBusFromSPCParityErrClear_1_MSB 0xF
#define QIB_7322_HwErrClear_IBCBusFromSPCParityErrClear_1_RMASK 0x1
-#define QIB_7322_HwErrClear_IBCBusToSPCparityErrClear_1_LSB 0xE
-#define QIB_7322_HwErrClear_IBCBusToSPCparityErrClear_1_MSB 0xE
-#define QIB_7322_HwErrClear_IBCBusToSPCparityErrClear_1_RMASK 0x1
+#define QIB_7322_HwErrClear_IBCBusToSPCParityErrClear_1_LSB 0xE
+#define QIB_7322_HwErrClear_IBCBusToSPCParityErrClear_1_MSB 0xE
+#define QIB_7322_HwErrClear_IBCBusToSPCParityErrClear_1_RMASK 0x1
#define QIB_7322_HwErrClear_IBCBusFromSPCParityErrClear_0_LSB 0xD
#define QIB_7322_HwErrClear_IBCBusFromSPCParityErrClear_0_MSB 0xD
#define QIB_7322_HwErrClear_IBCBusFromSPCParityErrClear_0_RMASK 0x1
-#define QIB_7322_HwErrClear_IBCBusToSPCparityErrClear_0_LSB 0xC
-#define QIB_7322_HwErrClear_IBCBusToSPCparityErrClear_0_MSB 0xC
-#define QIB_7322_HwErrClear_IBCBusToSPCparityErrClear_0_RMASK 0x1
+#define QIB_7322_HwErrClear_statusValidNoEopClear_LSB 0xC
+#define QIB_7322_HwErrClear_statusValidNoEopClear_MSB 0xC
+#define QIB_7322_HwErrClear_statusValidNoEopClear_RMASK 0x1
#define QIB_7322_HwErrClear_LATriggeredClear_LSB 0xB
#define QIB_7322_HwErrClear_LATriggeredClear_MSB 0xB
#define QIB_7322_HwErrClear_LATriggeredClear_RMASK 0x1
@@ -880,15 +880,15 @@
#define QIB_7322_HwDiagCtrl_ForceIBCBusFromSPCParityErr_1_LSB 0xF
#define QIB_7322_HwDiagCtrl_ForceIBCBusFromSPCParityErr_1_MSB 0xF
#define QIB_7322_HwDiagCtrl_ForceIBCBusFromSPCParityErr_1_RMASK 0x1
-#define QIB_7322_HwDiagCtrl_ForcestatusValidNoEop_1_LSB 0xE
-#define QIB_7322_HwDiagCtrl_ForcestatusValidNoEop_1_MSB 0xE
-#define QIB_7322_HwDiagCtrl_ForcestatusValidNoEop_1_RMASK 0x1
+#define QIB_7322_HwDiagCtrl_ForceIBCBusToSPCParityErr_1_LSB 0xE
+#define QIB_7322_HwDiagCtrl_ForceIBCBusToSPCParityErr_1_MSB 0xE
+#define QIB_7322_HwDiagCtrl_ForceIBCBusToSPCParityErr_1_RMASK 0x1
#define QIB_7322_HwDiagCtrl_ForceIBCBusFromSPCParityErr_0_LSB 0xD
#define QIB_7322_HwDiagCtrl_ForceIBCBusFromSPCParityErr_0_MSB 0xD
#define QIB_7322_HwDiagCtrl_ForceIBCBusFromSPCParityErr_0_RMASK 0x1
-#define QIB_7322_HwDiagCtrl_ForcestatusValidNoEop_0_LSB 0xC
-#define QIB_7322_HwDiagCtrl_ForcestatusValidNoEop_0_MSB 0xC
-#define QIB_7322_HwDiagCtrl_ForcestatusValidNoEop_0_RMASK 0x1
+#define QIB_7322_HwDiagCtrl_ForceIBCBusToSPCParityErr_0_LSB 0xC
+#define QIB_7322_HwDiagCtrl_ForceIBCBusToSPCParityErr_0_MSB 0xC
+#define QIB_7322_HwDiagCtrl_ForceIBCBusToSPCParityErr_0_RMASK 0x1
#define QIB_7322_EXTStatus_OFFS 0xC0
#define QIB_7322_EXTStatus_DEF 0x000000000000X000
diff --git a/drivers/infiniband/hw/qib/qib_diag.c b/drivers/infiniband/hw/qib/qib_diag.c
index ca98dd5..05dcf0d 100644
--- a/drivers/infiniband/hw/qib/qib_diag.c
+++ b/drivers/infiniband/hw/qib/qib_diag.c
@@ -233,6 +233,7 @@
u32 __iomem *krb32 = (u32 __iomem *)dd->kregbase;
u32 __iomem *map = NULL;
u32 cnt = 0;
+ u32 tot4k, offs4k;
/* First, simplest case, offset is within the first map. */
kreglen = (dd->kregend - dd->kregbase) * sizeof(u64);
@@ -250,7 +251,8 @@
if (dd->userbase) {
/* If user regs mapped, they are after send, so set limit. */
u32 ulim = (dd->cfgctxts * dd->ureg_align) + dd->uregbase;
- snd_lim = dd->uregbase;
+ if (!dd->piovl15base)
+ snd_lim = dd->uregbase;
krb32 = (u32 __iomem *)dd->userbase;
if (offset >= dd->uregbase && offset < ulim) {
map = krb32 + (offset - dd->uregbase) / sizeof(u32);
@@ -277,14 +279,14 @@
/* If 4k buffers exist, account for them by bumping
* appropriate limit.
*/
+ tot4k = dd->piobcnt4k * dd->align4k;
+ offs4k = dd->piobufbase >> 32;
if (dd->piobcnt4k) {
- u32 tot4k = dd->piobcnt4k * dd->align4k;
- u32 offs4k = dd->piobufbase >> 32;
if (snd_bottom > offs4k)
snd_bottom = offs4k;
else {
/* 4k above 2k. Bump snd_lim, if needed*/
- if (!dd->userbase)
+ if (!dd->userbase || dd->piovl15base)
snd_lim = offs4k + tot4k;
}
}
@@ -298,6 +300,15 @@
cnt = snd_lim - offset;
}
+ if (!map && offs4k && dd->piovl15base) {
+ snd_lim = offs4k + tot4k + 2 * dd->align4k;
+ if (offset >= (offs4k + tot4k) && offset < snd_lim) {
+ map = (u32 __iomem *)dd->piovl15base +
+ ((offset - (offs4k + tot4k)) / sizeof(u32));
+ cnt = snd_lim - offset;
+ }
+ }
+
mapped:
if (cntp)
*cntp = cnt;
diff --git a/drivers/infiniband/hw/qib/qib_fs.c b/drivers/infiniband/hw/qib/qib_fs.c
index 7554704..844954b 100644
--- a/drivers/infiniband/hw/qib/qib_fs.c
+++ b/drivers/infiniband/hw/qib/qib_fs.c
@@ -144,10 +144,11 @@
size_t count, loff_t *ppos)
{
u64 *counters;
+ size_t avail;
struct qib_devdata *dd = private2dd(file);
- return simple_read_from_buffer(buf, count, ppos, counters,
- dd->f_read_cntrs(dd, *ppos, NULL, &counters));
+ avail = dd->f_read_cntrs(dd, *ppos, NULL, &counters);
+ return simple_read_from_buffer(buf, count, ppos, counters, avail);
}
/* read the per-device counters */
@@ -155,10 +156,11 @@
size_t count, loff_t *ppos)
{
char *names;
+ size_t avail;
struct qib_devdata *dd = private2dd(file);
- return simple_read_from_buffer(buf, count, ppos, names,
- dd->f_read_cntrs(dd, *ppos, &names, NULL));
+ avail = dd->f_read_cntrs(dd, *ppos, &names, NULL);
+ return simple_read_from_buffer(buf, count, ppos, names, avail);
}
static const struct file_operations cntr_ops[] = {
@@ -176,10 +178,11 @@
size_t count, loff_t *ppos)
{
char *names;
+ size_t avail;
struct qib_devdata *dd = private2dd(file);
- return simple_read_from_buffer(buf, count, ppos, names,
- dd->f_read_portcntrs(dd, *ppos, 0, &names, NULL));
+ avail = dd->f_read_portcntrs(dd, *ppos, 0, &names, NULL);
+ return simple_read_from_buffer(buf, count, ppos, names, avail);
}
/* read the per-port counters for port 1 (pidx 0) */
@@ -187,10 +190,11 @@
size_t count, loff_t *ppos)
{
u64 *counters;
+ size_t avail;
struct qib_devdata *dd = private2dd(file);
- return simple_read_from_buffer(buf, count, ppos, counters,
- dd->f_read_portcntrs(dd, *ppos, 0, NULL, &counters));
+ avail = dd->f_read_portcntrs(dd, *ppos, 0, NULL, &counters);
+ return simple_read_from_buffer(buf, count, ppos, counters, avail);
}
/* read the per-port counters for port 2 (pidx 1) */
@@ -198,10 +202,11 @@
size_t count, loff_t *ppos)
{
u64 *counters;
+ size_t avail;
struct qib_devdata *dd = private2dd(file);
- return simple_read_from_buffer(buf, count, ppos, counters,
- dd->f_read_portcntrs(dd, *ppos, 1, NULL, &counters));
+ avail = dd->f_read_portcntrs(dd, *ppos, 1, NULL, &counters);
+ return simple_read_from_buffer(buf, count, ppos, counters, avail);
}
static const struct file_operations portcntr_ops[] = {
@@ -537,10 +542,8 @@
list_for_each_entry_safe(dd, tmp, &qib_dev_list, list) {
spin_unlock_irqrestore(&qib_devs_lock, flags);
ret = add_cntr_files(sb, dd);
- if (ret) {
- deactivate_super(sb);
+ if (ret)
goto bail;
- }
spin_lock_irqsave(&qib_devs_lock, flags);
}
diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c
index 7b6549f..a5e29db 100644
--- a/drivers/infiniband/hw/qib/qib_iba6120.c
+++ b/drivers/infiniband/hw/qib/qib_iba6120.c
@@ -1355,8 +1355,7 @@
hwstat = qib_read_kreg64(dd, kr_hwerrstatus);
if (hwstat) {
/* should just have PLL, clear all set, in an case */
- if (hwstat & ~QLOGIC_IB_HWE_SERDESPLLFAILED)
- qib_write_kreg(dd, kr_hwerrclear, hwstat);
+ qib_write_kreg(dd, kr_hwerrclear, hwstat);
qib_write_kreg(dd, kr_errclear, ERR_MASK(HardwareErr));
}
@@ -3475,14 +3474,6 @@
struct qib_devdata *dd;
int ret;
-#ifndef CONFIG_PCI_MSI
- qib_early_err(&pdev->dev, "QLogic PCIE device 0x%x cannot "
- "work if CONFIG_PCI_MSI is not enabled\n",
- ent->device);
- dd = ERR_PTR(-ENODEV);
- goto bail;
-#endif
-
dd = qib_alloc_devdata(pdev, sizeof(struct qib_pportdata) +
sizeof(struct qib_chip_specific));
if (IS_ERR(dd))
@@ -3554,10 +3545,6 @@
if (qib_mini_init)
goto bail;
-#ifndef CONFIG_PCI_MSI
- qib_dev_err(dd, "PCI_MSI not configured, NO interrupts\n");
-#endif
-
if (qib_pcie_params(dd, 8, NULL, NULL))
qib_dev_err(dd, "Failed to setup PCIe or interrupts; "
"continuing anyway\n");
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index 2c24eab..5eedf83 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -42,9 +42,6 @@
#include <linux/jiffies.h>
#include <rdma/ib_verbs.h>
#include <rdma/ib_smi.h>
-#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
-#include <linux/dca.h>
-#endif
#include "qib.h"
#include "qib_7322_regs.h"
@@ -114,40 +111,18 @@
module_param_named(singleport, qib_singleport, ushort, S_IRUGO);
MODULE_PARM_DESC(singleport, "Use only IB port 1; more per-port buffer space");
-
-/*
- * Setup QMH7342 receive and transmit parameters, necessary because
- * each bay, Mez connector, and IB port need different tuning, beyond
- * what the switch and HCA can do automatically.
- * It's expected to be done by cat'ing files to the modules file,
- * rather than setting up as a module parameter.
- * It's a "write-only" file, returns 0 when read back.
- * The unit, port, bay (if given), and values MUST be done as a single write.
- * The unit, port, and bay must precede the values to be effective.
- */
-static int setup_qmh_params(const char *, struct kernel_param *);
-static unsigned dummy_qmh_params;
-module_param_call(qmh_serdes_setup, setup_qmh_params, param_get_uint,
- &dummy_qmh_params, S_IWUSR | S_IRUGO);
-
-/* similarly for QME7342, but it's simpler */
-static int setup_qme_params(const char *, struct kernel_param *);
-static unsigned dummy_qme_params;
-module_param_call(qme_serdes_setup, setup_qme_params, param_get_uint,
- &dummy_qme_params, S_IWUSR | S_IRUGO);
-
#define MAX_ATTEN_LEN 64 /* plenty for any real system */
/* for read back, default index is ~5m copper cable */
-static char cable_atten_list[MAX_ATTEN_LEN] = "10";
-static struct kparam_string kp_cable_atten = {
- .string = cable_atten_list,
+static char txselect_list[MAX_ATTEN_LEN] = "10";
+static struct kparam_string kp_txselect = {
+ .string = txselect_list,
.maxlen = MAX_ATTEN_LEN
};
-static int setup_cable_atten(const char *, struct kernel_param *);
-module_param_call(cable_atten, setup_cable_atten, param_get_string,
- &kp_cable_atten, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(cable_atten, \
- "cable attenuation indices for cables with invalid EEPROM");
+static int setup_txselect(const char *, struct kernel_param *);
+module_param_call(txselect, setup_txselect, param_get_string,
+ &kp_txselect, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(txselect, \
+ "Tx serdes indices (for no QSFP or invalid QSFP data)");
#define BOARD_QME7342 5
#define BOARD_QMH7342 6
@@ -540,12 +515,6 @@
u32 lastbuf_for_pio;
u32 stay_in_freeze;
u32 recovery_ports_initted;
-#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
- u32 dca_ctrl;
- int rhdr_cpu[18];
- int sdma_cpu[2];
- u64 dca_rcvhdr_ctrl[5]; /* B, C, D, E, F */
-#endif
struct msix_entry *msix_entries;
void **msix_arg;
unsigned long *sendchkenable;
@@ -574,11 +543,12 @@
static void write_tx_serdes_param(struct qib_pportdata *, struct txdds_ent *);
#define TXDDS_TABLE_SZ 16 /* number of entries per speed in onchip table */
+#define TXDDS_EXTRA_SZ 13 /* number of extra tx settings entries */
#define SERDES_CHANS 4 /* yes, it's obvious, but one less magic number */
#define H1_FORCE_VAL 8
-#define H1_FORCE_QME 1 /* may be overridden via setup_qme_params() */
-#define H1_FORCE_QMH 7 /* may be overridden via setup_qmh_params() */
+#define H1_FORCE_QME 1 /* may be overridden via setup_txselect() */
+#define H1_FORCE_QMH 7 /* may be overridden via setup_txselect() */
/* The static and dynamic registers are paired, and the pairs indexed by spd */
#define krp_static_adapt_dis(spd) (KREG_IBPORT_IDX(ADAPT_DISABLE_STATIC_SDR) \
@@ -590,15 +560,6 @@
#define QDR_STATIC_ADAPT_INIT 0xffffffffffULL /* up, disable H0,H1-8, LE */
#define QDR_STATIC_ADAPT_INIT_R1 0xf0ffffffffULL /* r1 up, disable H0,H1-8 */
-static const struct txdds_ent qmh_sdr_txdds = { 11, 0, 5, 6 };
-static const struct txdds_ent qmh_ddr_txdds = { 7, 0, 2, 8 };
-static const struct txdds_ent qmh_qdr_txdds = { 0, 1, 3, 10 };
-
-/* this is used for unknown mez cards also */
-static const struct txdds_ent qme_sdr_txdds = { 11, 0, 4, 4 };
-static const struct txdds_ent qme_ddr_txdds = { 7, 0, 2, 7 };
-static const struct txdds_ent qme_qdr_txdds = { 0, 1, 12, 11 };
-
struct qib_chippport_specific {
u64 __iomem *kpregbase;
u64 __iomem *cpregbase;
@@ -637,12 +598,8 @@
* Per-bay per-channel rcv QMH H1 values and Tx values for QDR.
* entry zero is unused, to simplify indexing
*/
- u16 h1_val;
- u8 amp[SERDES_CHANS];
- u8 pre[SERDES_CHANS];
- u8 mainv[SERDES_CHANS];
- u8 post[SERDES_CHANS];
- u8 no_eep; /* attenuation index to use if no qsfp info */
+ u8 h1_val;
+ u8 no_eep; /* txselect table index to use if no qsfp info */
u8 ipg_tries;
u8 ibmalfusesnap;
struct qib_qsfp_data qsfp_data;
@@ -676,52 +633,6 @@
SYM_LSB(IntStatus, SDmaCleanupDone_1), 2 },
};
-#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
-static const struct dca_reg_map {
- int shadow_inx;
- int lsb;
- u64 mask;
- u16 regno;
-} dca_rcvhdr_reg_map[] = {
- { 0, SYM_LSB(DCACtrlB, RcvHdrq0DCAOPH),
- ~SYM_MASK(DCACtrlB, RcvHdrq0DCAOPH) , KREG_IDX(DCACtrlB) },
- { 0, SYM_LSB(DCACtrlB, RcvHdrq1DCAOPH),
- ~SYM_MASK(DCACtrlB, RcvHdrq1DCAOPH) , KREG_IDX(DCACtrlB) },
- { 0, SYM_LSB(DCACtrlB, RcvHdrq2DCAOPH),
- ~SYM_MASK(DCACtrlB, RcvHdrq2DCAOPH) , KREG_IDX(DCACtrlB) },
- { 0, SYM_LSB(DCACtrlB, RcvHdrq3DCAOPH),
- ~SYM_MASK(DCACtrlB, RcvHdrq3DCAOPH) , KREG_IDX(DCACtrlB) },
- { 1, SYM_LSB(DCACtrlC, RcvHdrq4DCAOPH),
- ~SYM_MASK(DCACtrlC, RcvHdrq4DCAOPH) , KREG_IDX(DCACtrlC) },
- { 1, SYM_LSB(DCACtrlC, RcvHdrq5DCAOPH),
- ~SYM_MASK(DCACtrlC, RcvHdrq5DCAOPH) , KREG_IDX(DCACtrlC) },
- { 1, SYM_LSB(DCACtrlC, RcvHdrq6DCAOPH),
- ~SYM_MASK(DCACtrlC, RcvHdrq6DCAOPH) , KREG_IDX(DCACtrlC) },
- { 1, SYM_LSB(DCACtrlC, RcvHdrq7DCAOPH),
- ~SYM_MASK(DCACtrlC, RcvHdrq7DCAOPH) , KREG_IDX(DCACtrlC) },
- { 2, SYM_LSB(DCACtrlD, RcvHdrq8DCAOPH),
- ~SYM_MASK(DCACtrlD, RcvHdrq8DCAOPH) , KREG_IDX(DCACtrlD) },
- { 2, SYM_LSB(DCACtrlD, RcvHdrq9DCAOPH),
- ~SYM_MASK(DCACtrlD, RcvHdrq9DCAOPH) , KREG_IDX(DCACtrlD) },
- { 2, SYM_LSB(DCACtrlD, RcvHdrq10DCAOPH),
- ~SYM_MASK(DCACtrlD, RcvHdrq10DCAOPH) , KREG_IDX(DCACtrlD) },
- { 2, SYM_LSB(DCACtrlD, RcvHdrq11DCAOPH),
- ~SYM_MASK(DCACtrlD, RcvHdrq11DCAOPH) , KREG_IDX(DCACtrlD) },
- { 3, SYM_LSB(DCACtrlE, RcvHdrq12DCAOPH),
- ~SYM_MASK(DCACtrlE, RcvHdrq12DCAOPH) , KREG_IDX(DCACtrlE) },
- { 3, SYM_LSB(DCACtrlE, RcvHdrq13DCAOPH),
- ~SYM_MASK(DCACtrlE, RcvHdrq13DCAOPH) , KREG_IDX(DCACtrlE) },
- { 3, SYM_LSB(DCACtrlE, RcvHdrq14DCAOPH),
- ~SYM_MASK(DCACtrlE, RcvHdrq14DCAOPH) , KREG_IDX(DCACtrlE) },
- { 3, SYM_LSB(DCACtrlE, RcvHdrq15DCAOPH),
- ~SYM_MASK(DCACtrlE, RcvHdrq15DCAOPH) , KREG_IDX(DCACtrlE) },
- { 4, SYM_LSB(DCACtrlF, RcvHdrq16DCAOPH),
- ~SYM_MASK(DCACtrlF, RcvHdrq16DCAOPH) , KREG_IDX(DCACtrlF) },
- { 4, SYM_LSB(DCACtrlF, RcvHdrq17DCAOPH),
- ~SYM_MASK(DCACtrlF, RcvHdrq17DCAOPH) , KREG_IDX(DCACtrlF) },
-};
-#endif
-
/* ibcctrl bits */
#define QLOGIC_IB_IBCC_LINKINITCMD_DISABLE 1
/* cycle through TS1/TS2 till OK */
@@ -1189,9 +1100,9 @@
HWE_AUTO_P(SDmaMemReadErr, 1),
HWE_AUTO_P(SDmaMemReadErr, 0),
HWE_AUTO_P(IBCBusFromSPCParityErr, 1),
+ HWE_AUTO_P(IBCBusToSPCParityErr, 1),
HWE_AUTO_P(IBCBusFromSPCParityErr, 0),
- HWE_AUTO_P(statusValidNoEop, 1),
- HWE_AUTO_P(statusValidNoEop, 0),
+ HWE_AUTO(statusValidNoEop),
HWE_AUTO(LATriggered),
{ .mask = 0 }
};
@@ -2572,95 +2483,6 @@
qib_write_kreg_port(ppd, krp_rcvpktledcnt, ledblink);
}
-#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
-static void qib_update_rhdrq_dca(struct qib_ctxtdata *rcd)
-{
- struct qib_devdata *dd = rcd->dd;
- struct qib_chip_specific *cspec = dd->cspec;
- int cpu = get_cpu();
-
- if (cspec->rhdr_cpu[rcd->ctxt] != cpu) {
- const struct dca_reg_map *rmp;
-
- cspec->rhdr_cpu[rcd->ctxt] = cpu;
- rmp = &dca_rcvhdr_reg_map[rcd->ctxt];
- cspec->dca_rcvhdr_ctrl[rmp->shadow_inx] &= rmp->mask;
- cspec->dca_rcvhdr_ctrl[rmp->shadow_inx] |=
- (u64) dca3_get_tag(&dd->pcidev->dev, cpu) << rmp->lsb;
- qib_write_kreg(dd, rmp->regno,
- cspec->dca_rcvhdr_ctrl[rmp->shadow_inx]);
- cspec->dca_ctrl |= SYM_MASK(DCACtrlA, RcvHdrqDCAEnable);
- qib_write_kreg(dd, KREG_IDX(DCACtrlA), cspec->dca_ctrl);
- }
- put_cpu();
-}
-
-static void qib_update_sdma_dca(struct qib_pportdata *ppd)
-{
- struct qib_devdata *dd = ppd->dd;
- struct qib_chip_specific *cspec = dd->cspec;
- int cpu = get_cpu();
- unsigned pidx = ppd->port - 1;
-
- if (cspec->sdma_cpu[pidx] != cpu) {
- cspec->sdma_cpu[pidx] = cpu;
- cspec->dca_rcvhdr_ctrl[4] &= ~(ppd->hw_pidx ?
- SYM_MASK(DCACtrlF, SendDma1DCAOPH) :
- SYM_MASK(DCACtrlF, SendDma0DCAOPH));
- cspec->dca_rcvhdr_ctrl[4] |=
- (u64) dca3_get_tag(&dd->pcidev->dev, cpu) <<
- (ppd->hw_pidx ?
- SYM_LSB(DCACtrlF, SendDma1DCAOPH) :
- SYM_LSB(DCACtrlF, SendDma0DCAOPH));
- qib_write_kreg(dd, KREG_IDX(DCACtrlF),
- cspec->dca_rcvhdr_ctrl[4]);
- cspec->dca_ctrl |= ppd->hw_pidx ?
- SYM_MASK(DCACtrlA, SendDMAHead1DCAEnable) :
- SYM_MASK(DCACtrlA, SendDMAHead0DCAEnable);
- qib_write_kreg(dd, KREG_IDX(DCACtrlA), cspec->dca_ctrl);
- }
- put_cpu();
-}
-
-static void qib_setup_dca(struct qib_devdata *dd)
-{
- struct qib_chip_specific *cspec = dd->cspec;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(cspec->rhdr_cpu); i++)
- cspec->rhdr_cpu[i] = -1;
- for (i = 0; i < ARRAY_SIZE(cspec->sdma_cpu); i++)
- cspec->sdma_cpu[i] = -1;
- cspec->dca_rcvhdr_ctrl[0] =
- (1ULL << SYM_LSB(DCACtrlB, RcvHdrq0DCAXfrCnt)) |
- (1ULL << SYM_LSB(DCACtrlB, RcvHdrq1DCAXfrCnt)) |
- (1ULL << SYM_LSB(DCACtrlB, RcvHdrq2DCAXfrCnt)) |
- (1ULL << SYM_LSB(DCACtrlB, RcvHdrq3DCAXfrCnt));
- cspec->dca_rcvhdr_ctrl[1] =
- (1ULL << SYM_LSB(DCACtrlC, RcvHdrq4DCAXfrCnt)) |
- (1ULL << SYM_LSB(DCACtrlC, RcvHdrq5DCAXfrCnt)) |
- (1ULL << SYM_LSB(DCACtrlC, RcvHdrq6DCAXfrCnt)) |
- (1ULL << SYM_LSB(DCACtrlC, RcvHdrq7DCAXfrCnt));
- cspec->dca_rcvhdr_ctrl[2] =
- (1ULL << SYM_LSB(DCACtrlD, RcvHdrq8DCAXfrCnt)) |
- (1ULL << SYM_LSB(DCACtrlD, RcvHdrq9DCAXfrCnt)) |
- (1ULL << SYM_LSB(DCACtrlD, RcvHdrq10DCAXfrCnt)) |
- (1ULL << SYM_LSB(DCACtrlD, RcvHdrq11DCAXfrCnt));
- cspec->dca_rcvhdr_ctrl[3] =
- (1ULL << SYM_LSB(DCACtrlE, RcvHdrq12DCAXfrCnt)) |
- (1ULL << SYM_LSB(DCACtrlE, RcvHdrq13DCAXfrCnt)) |
- (1ULL << SYM_LSB(DCACtrlE, RcvHdrq14DCAXfrCnt)) |
- (1ULL << SYM_LSB(DCACtrlE, RcvHdrq15DCAXfrCnt));
- cspec->dca_rcvhdr_ctrl[4] =
- (1ULL << SYM_LSB(DCACtrlF, RcvHdrq16DCAXfrCnt)) |
- (1ULL << SYM_LSB(DCACtrlF, RcvHdrq17DCAXfrCnt));
- for (i = 0; i < ARRAY_SIZE(cspec->sdma_cpu); i++)
- qib_write_kreg(dd, KREG_IDX(DCACtrlB) + i,
- cspec->dca_rcvhdr_ctrl[i]);
-}
-
-#endif
-
/*
* Disable MSIx interrupt if enabled, call generic MSIx code
* to cleanup, and clear pending MSIx interrupts.
@@ -2701,15 +2523,6 @@
{
int i;
-#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
- if (dd->flags & QIB_DCA_ENABLED) {
- dca_remove_requester(&dd->pcidev->dev);
- dd->flags &= ~QIB_DCA_ENABLED;
- dd->cspec->dca_ctrl = 0;
- qib_write_kreg(dd, KREG_IDX(DCACtrlA), dd->cspec->dca_ctrl);
- }
-#endif
-
qib_7322_free_irq(dd);
kfree(dd->cspec->cntrs);
kfree(dd->cspec->sendchkenable);
@@ -3017,11 +2830,6 @@
if (dd->int_counter != (u32) -1)
dd->int_counter++;
-#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
- if (dd->flags & QIB_DCA_ENABLED)
- qib_update_rhdrq_dca(rcd);
-#endif
-
/* Clear the interrupt bit we expect to be set. */
qib_write_kreg(dd, kr_intclear, ((1ULL << QIB_I_RCVAVAIL_LSB) |
(1ULL << QIB_I_RCVURG_LSB)) << rcd->ctxt);
@@ -3085,11 +2893,6 @@
if (dd->int_counter != (u32) -1)
dd->int_counter++;
-#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
- if (dd->flags & QIB_DCA_ENABLED)
- qib_update_sdma_dca(ppd);
-#endif
-
/* Clear the interrupt bit we expect to be set. */
qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ?
INT_MASK_P(SDma, 1) : INT_MASK_P(SDma, 0));
@@ -3119,11 +2922,6 @@
if (dd->int_counter != (u32) -1)
dd->int_counter++;
-#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
- if (dd->flags & QIB_DCA_ENABLED)
- qib_update_sdma_dca(ppd);
-#endif
-
/* Clear the interrupt bit we expect to be set. */
qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ?
INT_MASK_P(SDmaIdle, 1) : INT_MASK_P(SDmaIdle, 0));
@@ -3153,11 +2951,6 @@
if (dd->int_counter != (u32) -1)
dd->int_counter++;
-#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
- if (dd->flags & QIB_DCA_ENABLED)
- qib_update_sdma_dca(ppd);
-#endif
-
/* Clear the interrupt bit we expect to be set. */
qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ?
INT_MASK_P(SDmaProgress, 1) :
@@ -3188,11 +2981,6 @@
if (dd->int_counter != (u32) -1)
dd->int_counter++;
-#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
- if (dd->flags & QIB_DCA_ENABLED)
- qib_update_sdma_dca(ppd);
-#endif
-
/* Clear the interrupt bit we expect to be set. */
qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ?
INT_MASK_PM(SDmaCleanupDone, 1) :
@@ -4299,10 +4087,6 @@
qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt,
rcd->rcvhdrq_phys);
rcd->seq_cnt = 1;
-#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
- if (dd->flags & QIB_DCA_ENABLED)
- qib_update_rhdrq_dca(rcd);
-#endif
}
if (op & QIB_RCVCTRL_CTXT_DIS)
ppd->p_rcvctrl &=
@@ -4979,6 +4763,8 @@
SYM_MASK(IBPCSConfig_0, tx_rx_reset);
val = qib_read_kreg_port(ppd, krp_ib_pcsconfig);
+ qib_write_kreg(dd, kr_hwerrmask,
+ dd->cspec->hwerrmask & ~HWE_MASK(statusValidNoEop));
qib_write_kreg_port(ppd, krp_ibcctrl_a,
ppd->cpspec->ibcctrl_a &
~SYM_MASK(IBCCtrlA_0, IBLinkEn));
@@ -4988,6 +4774,9 @@
qib_write_kreg_port(ppd, krp_ib_pcsconfig, val & ~reset_bits);
qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a);
qib_write_kreg(dd, kr_scratch, 0ULL);
+ qib_write_kreg(dd, kr_hwerrclear,
+ SYM_MASK(HwErrClear, statusValidNoEopClear));
+ qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
}
/*
@@ -5360,7 +5149,13 @@
QIBL_IB_AUTONEG_INPROG)))
set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled);
if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) {
+ /* unlock the Tx settings, speed may change */
+ qib_write_kreg_port(ppd, krp_tx_deemph_override,
+ SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ reset_tx_deemphasis_override));
qib_cancel_sends(ppd);
+ /* on link down, ensure sane pcs state */
+ qib_7322_mini_pcs_reset(ppd);
spin_lock_irqsave(&ppd->sdma_lock, flags);
if (__qib_sdma_running(ppd))
__qib_sdma_process_event(ppd,
@@ -5766,26 +5561,28 @@
}
/*
- * called at device initialization time, and also if the cable_atten
+ * called at device initialization time, and also if the txselect
* module parameter is changed. This is used for cables that don't
* have valid QSFP EEPROMs (not present, or attenuation is zero).
* We initialize to the default, then if there is a specific
- * unit,port match, we use that.
+ * unit,port match, we use that (and set it immediately, for the
+ * current speed, if the link is at INIT or better).
* String format is "default# unit#,port#=# ... u,p=#", separators must
- * be a SPACE character. A newline terminates.
+ * be a SPACE character. A newline terminates. The u,p=# tuples may
+ * optionally have "u,p=#,#", where the final # is the H1 value
* The last specific match is used (actually, all are used, but last
* one is the one that winds up set); if none at all, fall back on default.
*/
static void set_no_qsfp_atten(struct qib_devdata *dd, int change)
{
char *nxt, *str;
- int pidx, unit, port, deflt;
+ u32 pidx, unit, port, deflt, h1;
unsigned long val;
- int any = 0;
+ int any = 0, seth1;
- str = cable_atten_list;
+ str = txselect_list;
- /* default number is validated in setup_cable_atten() */
+ /* default number is validated in setup_txselect() */
deflt = simple_strtoul(str, &nxt, 0);
for (pidx = 0; pidx < dd->num_pports; ++pidx)
dd->pport[pidx].cpspec->no_eep = deflt;
@@ -5812,16 +5609,30 @@
;
continue;
}
- if (val >= TXDDS_TABLE_SZ)
+ if (val >= TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)
continue;
+ seth1 = 0;
+ h1 = 0; /* gcc thinks it might be used uninitted */
+ if (*nxt == ',' && nxt[1]) {
+ str = ++nxt;
+ h1 = (u32)simple_strtoul(str, &nxt, 0);
+ if (nxt == str)
+ while (*nxt && *nxt++ != ' ') /* skip */
+ ;
+ else
+ seth1 = 1;
+ }
for (pidx = 0; dd->unit == unit && pidx < dd->num_pports;
++pidx) {
- if (dd->pport[pidx].port != port ||
- !dd->pport[pidx].link_speed_supported)
+ struct qib_pportdata *ppd = &dd->pport[pidx];
+
+ if (ppd->port != port || !ppd->link_speed_supported)
continue;
- dd->pport[pidx].cpspec->no_eep = val;
+ ppd->cpspec->no_eep = val;
+ if (seth1)
+ ppd->cpspec->h1_val = h1;
/* now change the IBC and serdes, overriding generic */
- init_txdds_table(&dd->pport[pidx], 1);
+ init_txdds_table(ppd, 1);
any++;
}
if (*nxt == '\n')
@@ -5832,35 +5643,35 @@
* Change the IBC and serdes, but since it's
* general, don't override specific settings.
*/
- for (pidx = 0; pidx < dd->num_pports; ++pidx) {
- if (!dd->pport[pidx].link_speed_supported)
- continue;
- init_txdds_table(&dd->pport[pidx], 0);
- }
+ for (pidx = 0; pidx < dd->num_pports; ++pidx)
+ if (dd->pport[pidx].link_speed_supported)
+ init_txdds_table(&dd->pport[pidx], 0);
}
}
-/* handle the cable_atten parameter changing */
-static int setup_cable_atten(const char *str, struct kernel_param *kp)
+/* handle the txselect parameter changing */
+static int setup_txselect(const char *str, struct kernel_param *kp)
{
struct qib_devdata *dd;
unsigned long val;
char *n;
if (strlen(str) >= MAX_ATTEN_LEN) {
- printk(KERN_INFO QIB_DRV_NAME " cable_atten_values string "
+ printk(KERN_INFO QIB_DRV_NAME " txselect_values string "
"too long\n");
return -ENOSPC;
}
val = simple_strtoul(str, &n, 0);
- if (n == str || val >= TXDDS_TABLE_SZ) {
+ if (n == str || val >= (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)) {
printk(KERN_INFO QIB_DRV_NAME
- "cable_atten_values must start with a number\n");
+ "txselect_values must start with a number < %d\n",
+ TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ);
return -EINVAL;
}
- strcpy(cable_atten_list, str);
+ strcpy(txselect_list, str);
list_for_each_entry(dd, &qib_dev_list, list)
- set_no_qsfp_atten(dd, 1);
+ if (dd->deviceid == PCI_DEVICE_ID_QLOGIC_IB_7322)
+ set_no_qsfp_atten(dd, 1);
return 0;
}
@@ -6260,29 +6071,18 @@
* the "cable info" setup here. Can be overridden
* in adapter-specific routines.
*/
- if (!(ppd->dd->flags & QIB_HAS_QSFP)) {
- int i;
- const struct txdds_ent *txdds;
-
- if (!IS_QMH(ppd->dd) && !IS_QME(ppd->dd))
- qib_devinfo(ppd->dd->pcidev, "IB%u:%u: "
+ if (!(dd->flags & QIB_HAS_QSFP)) {
+ if (!IS_QMH(dd) && !IS_QME(dd))
+ qib_devinfo(dd->pcidev, "IB%u:%u: "
"Unknown mezzanine card type\n",
- ppd->dd->unit, ppd->port);
- txdds = IS_QMH(ppd->dd) ? &qmh_qdr_txdds :
- &qme_qdr_txdds;
-
+ dd->unit, ppd->port);
+ cp->h1_val = IS_QMH(dd) ? H1_FORCE_QMH : H1_FORCE_QME;
/*
- * set values in case link comes up
- * before table is written to driver.
+ * Choose center value as default tx serdes setting
+ * until changed through module parameter.
*/
- cp->h1_val = IS_QMH(ppd->dd) ? H1_FORCE_QMH :
- H1_FORCE_QME;
- for (i = 0; i < SERDES_CHANS; i++) {
- cp->amp[i] = txdds->amp;
- cp->pre[i] = txdds->pre;
- cp->mainv[i] = txdds->main;
- cp->post[i] = txdds->post;
- }
+ ppd->cpspec->no_eep = IS_QMH(dd) ?
+ TXDDS_TABLE_SZ + 2 : TXDDS_TABLE_SZ + 4;
} else
cp->h1_val = H1_FORCE_VAL;
@@ -6299,8 +6099,7 @@
dd->rcvhdrentsize = QIB_RCVHDR_ENTSIZE;
dd->rcvhdrsize = QIB_DFLT_RCVHDRSIZE;
- dd->rhf_offset =
- dd->rcvhdrentsize - sizeof(u64) / sizeof(u32);
+ dd->rhf_offset = dd->rcvhdrentsize - sizeof(u64) / sizeof(u32);
/* we always allocate at least 2048 bytes for eager buffers */
dd->rcvegrbufsize = max(mtu, 2048);
@@ -6327,9 +6126,25 @@
qib_set_ctxtcnt(dd);
if (qib_wc_pat) {
- ret = init_chip_wc_pat(dd, NUM_VL15_BUFS * dd->align4k);
+ resource_size_t vl15off;
+ /*
+ * We do not set WC on the VL15 buffers to avoid
+ * a rare problem with unaligned writes from
+ * interrupt-flushed store buffers, so we need
+ * to map those separately here. We can't solve
+ * this for the rarely used mtrr case.
+ */
+ ret = init_chip_wc_pat(dd, 0);
if (ret)
goto bail;
+
+ /* vl15 buffers start just after the 4k buffers */
+ vl15off = dd->physaddr + (dd->piobufbase >> 32) +
+ dd->piobcnt4k * dd->align4k;
+ dd->piovl15base = ioremap_nocache(vl15off,
+ NUM_VL15_BUFS * dd->align4k);
+ if (!dd->piovl15base)
+ goto bail;
}
qib_7322_set_baseaddrs(dd); /* set chip access pointers now */
@@ -6919,13 +6734,6 @@
/* clear diagctrl register, in case diags were running and crashed */
qib_write_kreg(dd, kr_hwdiagctrl, 0);
-#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
- ret = dca_add_requester(&pdev->dev);
- if (!ret) {
- dd->flags |= QIB_DCA_ENABLED;
- qib_setup_dca(dd);
- }
-#endif
goto bail;
bail_cleanup:
@@ -7111,8 +6919,8 @@
static const struct txdds_ent txdds_qdr[TXDDS_TABLE_SZ] = {
/* amp, pre, main, post */
{ 2, 2, 15, 6 }, /* Loopback */
- { 0, 1, 0, 7 }, /* 2 dB */
- { 0, 1, 0, 9 }, /* 3 dB */
+ { 0, 1, 0, 7 }, /* 2 dB (also QMH7342) */
+ { 0, 1, 0, 9 }, /* 3 dB (also QMH7342) */
{ 0, 1, 0, 11 }, /* 4 dB */
{ 0, 1, 0, 13 }, /* 5 dB */
{ 0, 1, 0, 15 }, /* 6 dB */
@@ -7128,6 +6936,63 @@
{ 0, 2, 9, 15 }, /* 16 dB */
};
+/*
+ * extra entries for use with txselect, for indices >= TXDDS_TABLE_SZ.
+ * These are mostly used for mez cards going through connectors
+ * and backplane traces, but can be used to add other "unusual"
+ * table values as well.
+ */
+static const struct txdds_ent txdds_extra_sdr[TXDDS_EXTRA_SZ] = {
+ /* amp, pre, main, post */
+ { 0, 0, 0, 1 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 1 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 2 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 2 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 3 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 4 }, /* QMH7342 backplane settings */
+};
+
+static const struct txdds_ent txdds_extra_ddr[TXDDS_EXTRA_SZ] = {
+ /* amp, pre, main, post */
+ { 0, 0, 0, 7 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 7 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 8 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 8 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 9 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 10 }, /* QMH7342 backplane settings */
+};
+
+static const struct txdds_ent txdds_extra_qdr[TXDDS_EXTRA_SZ] = {
+ /* amp, pre, main, post */
+ { 0, 1, 0, 4 }, /* QMH7342 backplane settings */
+ { 0, 1, 0, 5 }, /* QMH7342 backplane settings */
+ { 0, 1, 0, 6 }, /* QMH7342 backplane settings */
+ { 0, 1, 0, 8 }, /* QMH7342 backplane settings */
+ { 0, 1, 12, 10 }, /* QME7342 backplane setting */
+ { 0, 1, 12, 11 }, /* QME7342 backplane setting */
+ { 0, 1, 12, 12 }, /* QME7342 backplane setting */
+ { 0, 1, 12, 14 }, /* QME7342 backplane setting */
+ { 0, 1, 12, 6 }, /* QME7342 backplane setting */
+ { 0, 1, 12, 7 }, /* QME7342 backplane setting */
+ { 0, 1, 12, 8 }, /* QME7342 backplane setting */
+ { 0, 1, 0, 10 }, /* QMH7342 backplane settings */
+ { 0, 1, 0, 12 }, /* QMH7342 backplane settings */
+};
+
static const struct txdds_ent *get_atten_table(const struct txdds_ent *txdds,
unsigned atten)
{
@@ -7145,7 +7010,7 @@
}
/*
- * if override is set, the module parameter cable_atten has a value
+ * if override is set, the module parameter txselect has a value
* for this specific port, so use it, rather than our normal mechanism.
*/
static void find_best_ent(struct qib_pportdata *ppd,
@@ -7184,15 +7049,28 @@
*ddr_dds = get_atten_table(txdds_ddr, qd->atten[0]);
*qdr_dds = get_atten_table(txdds_qdr, qd->atten[1]);
return;
- } else {
+ } else if (ppd->cpspec->no_eep < TXDDS_TABLE_SZ) {
/*
* If we have no (or incomplete) data from the cable
- * EEPROM, or no QSFP, use the module parameter value
- * to index into the attentuation table.
+ * EEPROM, or no QSFP, or override is set, use the
+ * module parameter value to index into the attentuation
+ * table.
*/
- *sdr_dds = &txdds_sdr[ppd->cpspec->no_eep];
- *ddr_dds = &txdds_ddr[ppd->cpspec->no_eep];
- *qdr_dds = &txdds_qdr[ppd->cpspec->no_eep];
+ idx = ppd->cpspec->no_eep;
+ *sdr_dds = &txdds_sdr[idx];
+ *ddr_dds = &txdds_ddr[idx];
+ *qdr_dds = &txdds_qdr[idx];
+ } else if (ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)) {
+ /* similar to above, but index into the "extra" table. */
+ idx = ppd->cpspec->no_eep - TXDDS_TABLE_SZ;
+ *sdr_dds = &txdds_extra_sdr[idx];
+ *ddr_dds = &txdds_extra_ddr[idx];
+ *qdr_dds = &txdds_extra_qdr[idx];
+ } else {
+ /* this shouldn't happen, it's range checked */
+ *sdr_dds = txdds_sdr + qib_long_atten;
+ *ddr_dds = txdds_ddr + qib_long_atten;
+ *qdr_dds = txdds_qdr + qib_long_atten;
}
}
@@ -7203,33 +7081,24 @@
int idx;
int single_ent = 0;
- if (IS_QMH(ppd->dd)) {
- /* normally will be overridden, via setup_qmh() */
- sdr_dds = &qmh_sdr_txdds;
- ddr_dds = &qmh_ddr_txdds;
- qdr_dds = &qmh_qdr_txdds;
+ find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, override);
+
+ /* for mez cards or override, use the selected value for all entries */
+ if (!(ppd->dd->flags & QIB_HAS_QSFP) || override)
single_ent = 1;
- } else if (IS_QME(ppd->dd)) {
- sdr_dds = &qme_sdr_txdds;
- ddr_dds = &qme_ddr_txdds;
- qdr_dds = &qme_qdr_txdds;
- single_ent = 1;
- } else
- find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, override);
/* Fill in the first entry with the best entry found. */
set_txdds(ppd, 0, sdr_dds);
set_txdds(ppd, TXDDS_TABLE_SZ, ddr_dds);
set_txdds(ppd, 2 * TXDDS_TABLE_SZ, qdr_dds);
-
- /*
- * for our current speed, also write that value into the
- * tx serdes registers.
- */
- dds = (struct txdds_ent *)(ppd->link_speed_active == QIB_IB_QDR ?
- qdr_dds : (ppd->link_speed_active ==
- QIB_IB_DDR ? ddr_dds : sdr_dds));
- write_tx_serdes_param(ppd, dds);
+ if (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED |
+ QIBL_LINKACTIVE)) {
+ dds = (struct txdds_ent *)(ppd->link_speed_active ==
+ QIB_IB_QDR ? qdr_dds :
+ (ppd->link_speed_active ==
+ QIB_IB_DDR ? ddr_dds : sdr_dds));
+ write_tx_serdes_param(ppd, dds);
+ }
/* Fill in the remaining entries with the default table values. */
for (idx = 1; idx < ARRAY_SIZE(txdds_sdr); ++idx) {
@@ -7352,6 +7221,11 @@
*/
init_txdds_table(ppd, 0);
+ /* ensure no tx overrides from earlier driver loads */
+ qib_write_kreg_port(ppd, krp_tx_deemph_override,
+ SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ reset_tx_deemphasis_override));
+
/* Patch some SerDes defaults to "Better for IB" */
/* Timing Loop Bandwidth: cdr_timing[11:9] = 0 */
ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9));
@@ -7421,7 +7295,7 @@
QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN);
ppd->cpspec->qdr_dfe_on = 1;
- /* (FLoop LOS gate: PPM filter enabled */
+ /* FLoop LOS gate: PPM filter enabled */
ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10);
/* rx offset center enabled */
@@ -7486,68 +7360,39 @@
SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txc0_ena) |
SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcp1_ena) |
SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcn1_ena));
- deemph |= 1ULL << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
- tx_override_deemphasis_select);
- deemph |= txdds->amp << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
- txampcntl_d2a);
- deemph |= txdds->main << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
- txc0_ena);
- deemph |= txdds->post << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
- txcp1_ena);
- deemph |= txdds->pre << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+
+ deemph |= SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ tx_override_deemphasis_select);
+ deemph |= (txdds->amp & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txampcntl_d2a)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txampcntl_d2a);
+ deemph |= (txdds->main & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txc0_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txc0_ena);
+ deemph |= (txdds->post & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txcp1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txcp1_ena);
+ deemph |= (txdds->pre & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txcn1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
txcn1_ena);
qib_write_kreg_port(ppd, krp_tx_deemph_override, deemph);
}
/*
- * set per-bay, per channel parameters. For now, we ignore
- * do_tx, and always set tx parameters, and set them with the same value
- * for all channels, using the channel 0 value. We may switch to
- * per-channel settings in the future, and that method only needs
- * to be done once.
- * Because this also writes the IBC txdds table with a single set
- * of values, it should be called only for cases where we want to completely
- * force a specific setting, typically only for mez cards.
+ * Set the parameters for mez cards on link bounce, so they are
+ * always exactly what was requested. Similar logic to init_txdds
+ * but does just the serdes.
*/
static void adj_tx_serdes(struct qib_pportdata *ppd)
{
- struct txdds_ent txdds;
- int i;
- u8 *amp, *pre, *mainv, *post;
+ const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds;
+ struct txdds_ent *dds;
- /*
- * Because we use TX_DEEMPHASIS_OVERRIDE, we need to
- * always do tx side, just like H1, since it is cleared
- * by link down
- */
- amp = ppd->cpspec->amp;
- pre = ppd->cpspec->pre;
- mainv = ppd->cpspec->mainv;
- post = ppd->cpspec->post;
-
- amp[0] &= SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
- txampcntl_d2a);
- mainv[0] &= SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
- txc0_ena);
- post[0] &= SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
- txcp1_ena);
- pre[0] &= SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
- txcn1_ena);
-
- /*
- * Use the channel zero values, only, for now, for
- * all channels
- */
- txdds.amp = amp[0];
- txdds.pre = pre[0];
- txdds.main = mainv[0];
- txdds.post = post[0];
-
- /* write the QDR table for IBC use, as backup for link down */
- for (i = 0; i < ARRAY_SIZE(txdds_qdr); ++i)
- set_txdds(ppd, i + 32, &txdds);
-
- write_tx_serdes_param(ppd, &txdds);
+ find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, 1);
+ dds = (struct txdds_ent *)(ppd->link_speed_active == QIB_IB_QDR ?
+ qdr_dds : (ppd->link_speed_active == QIB_IB_DDR ?
+ ddr_dds : sdr_dds));
+ write_tx_serdes_param(ppd, dds);
}
/* set QDR forced value for H1, if needed */
@@ -7567,235 +7412,6 @@
}
}
-/*
- * Parse the parameters for the QMH7342, to get rx and tx serdes
- * settings for that Bay, for both possible mez connectors (PCIe bus)
- * and IB link (one link on mez1, two possible on mez2).
- *
- * Data is comma or white space separated.
- *
- * A set of data has 7 groups, rx and tx groups have SERDES_CHANS values,
- * one per IB lane (serdes channel).
- * The groups are Bay, bus# H1 rcv, and amp, pre, post, main Tx values (QDR).
- * The Bay # is used only for debugging currently.
- * H1 values are set whenever the link goes down, or is at cfg_test or
- * cfg_wait_enh. Tx values are programmed once, when this routine is called
- * (and with default values at chip initialization). Values are any base, in
- * strtoul style, and values are seperated by comma, or any white space
- * (space, tab, newline).
- *
- * An example set might look like this (white space vs
- * comma used for human ease of reading)
- * The ordering is a set of Bay# Bus# H1, amp, pre, post, and main for mez1 IB1,
- * repeat for mez2 IB1, then mez2 IB2.
- *
- * B B H1:0 amp:0 pre:0 post: 0 main:0
- * a u H1: 1 amp: 1 pre: 1 post: 1 main: 1
- * y s H1: 2 amp: 2 pre: 2 post: 2 main: 2
- * H1: 4 amp: 3 pre: 3 post: 3 main: 3
- * 1 3 8,6,5,6 0,0,0,0 1,1,1,1 10,10,10,10 3,3,3,3
- * 1 6 7,6,6,7 0,0,0,0 1,1,1,1 10,10,10,10 3,3,3,3
- * 1 6 9,7,7,8 0,0,0,0 1,1,1,1 10,10,10,10 3,3,3,3
- */
-#define N_QMH_FIELDS 22
-static int setup_qmh_params(const char *str, struct kernel_param *kp)
-{
- char *abuf, *v, *nv, *nvp;
- struct qib_devdata *dd;
- struct qib_pportdata *ppd;
- u32 mez, vlen, nf, port, bay;
- int ret = 0, found = 0;
-
- vlen = strlen(str) + 1;
- abuf = kmalloc(vlen, GFP_KERNEL);
- if (!abuf) {
- printk(KERN_INFO QIB_DRV_NAME
- " Unable to allocate QMH param buffer; ignoring\n");
- return 0;
- }
- memcpy(abuf, str, vlen);
- v = abuf;
-
- /* these 3 are because gcc can't know they are set before used */
- port = 1;
- mez = 1; /* used only for debugging */
- bay = 0; /* used only for debugging */
- ppd = NULL;
- for (nf = 0; (nv = strsep(&v, ", \t\n\r")) &&
- nf < (N_QMH_FIELDS * 3);) {
- u32 val;
-
- if (!*nv)
- /* allow for multiple separators */
- continue;
-
- val = simple_strtoul(nv, &nvp, 0);
- if (nv == nvp) {
- printk(KERN_INFO QIB_DRV_NAME
- " Bay%u, mez%u IB%u non-numeric value (%s) "
- "field #%u, ignoring rest\n", bay, mez,
- port, nv, nf % (N_QMH_FIELDS * 3));
- ret = -EINVAL;
- goto bail;
- }
- if (!(nf % N_QMH_FIELDS)) {
- ppd = NULL;
- bay = val;
- if (!bay || bay > 16) {
- printk(KERN_INFO QIB_DRV_NAME
- " Invalid bay # %u, field %u, "
- "ignoring rest\n", bay, nf);
- ret = -EINVAL;
- goto bail;
- }
- } else if ((nf % N_QMH_FIELDS) == 1) {
- u32 bus = val;
- if (nf == 1) {
- mez = 1;
- port = 1;
- } else if (nf == (N_QMH_FIELDS + 1)) {
- mez = 2;
- port = 1;
- } else {
- mez = 2;
- port = 2;
- }
- list_for_each_entry(dd, &qib_dev_list, list) {
- if (dd->deviceid != PCI_DEVICE_ID_QLOGIC_IB_7322
- || !IS_QMH(dd))
- continue; /* only for QMH cards */
- if (dd->pcidev->bus->number == bus) {
- found++;
- ppd = &dd->pport[port - 1];
- }
- }
- } else if (ppd) {
- u32 parm = (nf % N_QMH_FIELDS) - 2;
- if (parm < SERDES_CHANS && !(parm % SERDES_CHANS))
- ppd->cpspec->h1_val = val;
- else if (parm < (2 * SERDES_CHANS))
- ppd->cpspec->amp[parm % SERDES_CHANS] = val;
- else if (parm < (3 * SERDES_CHANS))
- ppd->cpspec->pre[parm % SERDES_CHANS] = val;
- else if (parm < (4 * SERDES_CHANS))
- ppd->cpspec->post[parm % SERDES_CHANS] = val;
- else {
- ppd->cpspec->mainv[parm % SERDES_CHANS] = val;
- /* At the end of a port, set params */
- if (parm == ((5 * SERDES_CHANS) - 1))
- adj_tx_serdes(ppd);
- }
- }
- nf++;
- }
- if (!found) {
- printk(KERN_ERR QIB_DRV_NAME
- ": No match found for qmh_serdes_setup parameter\n");
- ret = -EINVAL;
- }
-bail:
- kfree(abuf);
- return ret;
-}
-
-/*
- * Similarly for QME7342, but the format is simpler, values are the
- * same for all mez card positions in a blade (2 or 4 per blade), but
- * are different for some blades vs others, and we don't need to
- * specify different parameters for different serdes channels or different
- * IB ports.
- * Format is: h1 amp,pre,post,main
- * Alternate format (so ports can be different): Pport# h1 amp,pre,post,main
- */
-#define N_QME_FIELDS 5
-static int setup_qme_params(const char *str, struct kernel_param *kp)
-{
- char *abuf, *v, *nv, *nvp;
- struct qib_devdata *dd;
- u32 vlen, nf, port = 0;
- u8 h1, tx[4]; /* amp, pre, post, main */
- int ret = -EINVAL;
- char *seplist;
-
- vlen = strlen(str) + 1;
- abuf = kmalloc(vlen, GFP_KERNEL);
- if (!abuf) {
- printk(KERN_INFO QIB_DRV_NAME
- " Unable to allocate QME param buffer; ignoring\n");
- return 0;
- }
- strncpy(abuf, str, vlen);
-
- v = abuf;
- seplist = " \t";
- h1 = H1_FORCE_QME; /* gcc can't figure out always set before used */
-
- for (nf = 0; (nv = strsep(&v, seplist)); ) {
- u32 val;
-
- if (!*nv)
- /* allow for multiple separators */
- continue;
-
- if (!nf && *nv == 'P') {
- /* alternate format with port */
- val = simple_strtoul(++nv, &nvp, 0);
- if (nv == nvp || port >= NUM_IB_PORTS) {
- printk(KERN_INFO QIB_DRV_NAME
- " %s: non-numeric port value (%s) "
- "ignoring rest\n", __func__, nv);
- goto done;
- }
- port = val;
- continue; /* without incrementing nf */
- }
- val = simple_strtoul(nv, &nvp, 0);
- if (nv == nvp) {
- printk(KERN_INFO QIB_DRV_NAME
- " %s: non-numeric value (%s) "
- "field #%u, ignoring rest\n", __func__,
- nv, nf);
- goto done;
- }
- if (!nf) {
- h1 = val;
- seplist = ",";
- } else
- tx[nf - 1] = val;
- if (++nf == N_QME_FIELDS) {
- list_for_each_entry(dd, &qib_dev_list, list) {
- int pidx, i;
- if (dd->deviceid != PCI_DEVICE_ID_QLOGIC_IB_7322
- || !IS_QME(dd))
- continue; /* only for QME cards */
- for (pidx = 0; pidx < dd->num_pports; ++pidx) {
- struct qib_pportdata *ppd;
- ppd = &dd->pport[pidx];
- if ((port && ppd->port != port) ||
- !ppd->link_speed_supported)
- continue;
- ppd->cpspec->h1_val = h1;
- for (i = 0; i < SERDES_CHANS; i++) {
- ppd->cpspec->amp[i] = tx[0];
- ppd->cpspec->pre[i] = tx[1];
- ppd->cpspec->post[i] = tx[2];
- ppd->cpspec->mainv[i] = tx[3];
- }
- adj_tx_serdes(ppd);
- }
- }
- ret = 0;
- goto done;
- }
- }
- printk(KERN_INFO QIB_DRV_NAME
- " %s: Only %u of %u fields provided, skipping\n",
- __func__, nf, N_QME_FIELDS);
-done:
- kfree(abuf);
- return ret;
-}
-
#define SJA_EN SYM_MASK(SPC_JTAG_ACCESS_REG, SPC_JTAG_ACCESS_EN)
#define BISTEN_LSB SYM_LSB(SPC_JTAG_ACCESS_REG, bist_en)
diff --git a/drivers/infiniband/hw/qib/qib_init.c b/drivers/infiniband/hw/qib/qib_init.c
index c0139c0..a873dd5 100644
--- a/drivers/infiniband/hw/qib/qib_init.c
+++ b/drivers/infiniband/hw/qib/qib_init.c
@@ -1059,7 +1059,7 @@
goto bail_dev;
}
- qib_cq_wq = create_workqueue("qib_cq");
+ qib_cq_wq = create_singlethread_workqueue("qib_cq");
if (!qib_cq_wq) {
ret = -ENOMEM;
goto bail_wq;
@@ -1237,7 +1237,13 @@
*/
switch (ent->device) {
case PCI_DEVICE_ID_QLOGIC_IB_6120:
+#ifdef CONFIG_PCI_MSI
dd = qib_init_iba6120_funcs(pdev, ent);
+#else
+ qib_early_err(&pdev->dev, "QLogic PCIE device 0x%x cannot "
+ "work if CONFIG_PCI_MSI is not enabled\n",
+ ent->device);
+#endif
break;
case PCI_DEVICE_ID_QLOGIC_IB_7220:
@@ -1283,8 +1289,18 @@
if (qib_mini_init || initfail || ret) {
qib_stop_timers(dd);
+ flush_scheduled_work();
for (pidx = 0; pidx < dd->num_pports; ++pidx)
dd->f_quiet_serdes(dd->pport + pidx);
+ if (qib_mini_init)
+ goto bail;
+ if (!j) {
+ (void) qibfs_remove(dd);
+ qib_device_remove(dd);
+ }
+ if (!ret)
+ qib_unregister_ib_device(dd);
+ qib_postinit_cleanup(dd);
if (initfail)
ret = initfail;
goto bail;
@@ -1466,6 +1482,9 @@
dma_addr_t pa = rcd->rcvegrbuf_phys[chunk];
unsigned i;
+ /* clear for security and sanity on each use */
+ memset(rcd->rcvegrbuf[chunk], 0, size);
+
for (i = 0; e < egrcnt && i < egrperchunk; e++, i++) {
dd->f_put_tid(dd, e + egroff +
(u64 __iomem *)
@@ -1493,6 +1512,12 @@
return -ENOMEM;
}
+/*
+ * Note: Changes to this routine should be mirrored
+ * for the diagnostics routine qib_remap_ioaddr32().
+ * There is also related code for VL15 buffers in qib_init_7322_variables().
+ * The teardown code that unmaps is in qib_pcie_ddcleanup()
+ */
int init_chip_wc_pat(struct qib_devdata *dd, u32 vl15buflen)
{
u64 __iomem *qib_kregbase = NULL;
diff --git a/drivers/infiniband/hw/qib/qib_pcie.c b/drivers/infiniband/hw/qib/qib_pcie.c
index c926bf4..7fa6e55 100644
--- a/drivers/infiniband/hw/qib/qib_pcie.c
+++ b/drivers/infiniband/hw/qib/qib_pcie.c
@@ -179,6 +179,8 @@
iounmap(dd->piobase);
if (dd->userbase)
iounmap(dd->userbase);
+ if (dd->piovl15base)
+ iounmap(dd->piovl15base);
pci_disable_device(dd->pcidev);
pci_release_regions(dd->pcidev);
diff --git a/drivers/infiniband/hw/qib/qib_sd7220.c b/drivers/infiniband/hw/qib/qib_sd7220.c
index 0aeed0e..e9f9f8b 100644
--- a/drivers/infiniband/hw/qib/qib_sd7220.c
+++ b/drivers/infiniband/hw/qib/qib_sd7220.c
@@ -1,5 +1,6 @@
/*
- * Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
+ * All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -37,10 +38,14 @@
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/firmware.h>
#include "qib.h"
#include "qib_7220.h"
+#define SD7220_FW_NAME "qlogic/sd7220.fw"
+MODULE_FIRMWARE(SD7220_FW_NAME);
+
/*
* Same as in qib_iba7220.c, but just the registers needed here.
* Could move whole set to qib_7220.h, but decided better to keep
@@ -102,6 +107,10 @@
/* Tweak the register (CMUCTRL5) that contains the TRIMSELF controls */
static int qib_sd_trimself(struct qib_devdata *dd, int val);
static int epb_access(struct qib_devdata *dd, int sdnum, int claim);
+static int qib_sd7220_ib_load(struct qib_devdata *dd,
+ const struct firmware *fw);
+static int qib_sd7220_ib_vfy(struct qib_devdata *dd,
+ const struct firmware *fw);
/*
* Below keeps track of whether the "once per power-on" initialization has
@@ -110,10 +119,13 @@
* state of the reset "pin", is no longer valid. Instead, we check for the
* actual uC code having been loaded.
*/
-static int qib_ibsd_ucode_loaded(struct qib_pportdata *ppd)
+static int qib_ibsd_ucode_loaded(struct qib_pportdata *ppd,
+ const struct firmware *fw)
{
struct qib_devdata *dd = ppd->dd;
- if (!dd->cspec->serdes_first_init_done && (qib_sd7220_ib_vfy(dd) > 0))
+
+ if (!dd->cspec->serdes_first_init_done &&
+ qib_sd7220_ib_vfy(dd, fw) > 0)
dd->cspec->serdes_first_init_done = 1;
return dd->cspec->serdes_first_init_done;
}
@@ -377,6 +389,7 @@
*/
int qib_sd7220_init(struct qib_devdata *dd)
{
+ const struct firmware *fw;
int ret = 1; /* default to failure */
int first_reset, was_reset;
@@ -387,8 +400,15 @@
qib_ibsd_reset(dd, 1);
qib_sd_trimdone_monitor(dd, "Driver-reload");
}
+
+ ret = request_firmware(&fw, SD7220_FW_NAME, &dd->pcidev->dev);
+ if (ret) {
+ qib_dev_err(dd, "Failed to load IB SERDES image\n");
+ goto done;
+ }
+
/* Substitute our deduced value for was_reset */
- ret = qib_ibsd_ucode_loaded(dd->pport);
+ ret = qib_ibsd_ucode_loaded(dd->pport, fw);
if (ret < 0)
goto bail;
@@ -437,13 +457,13 @@
int vfy;
int trim_done;
- ret = qib_sd7220_ib_load(dd);
+ ret = qib_sd7220_ib_load(dd, fw);
if (ret < 0) {
qib_dev_err(dd, "Failed to load IB SERDES image\n");
goto bail;
} else {
/* Loaded image, try to verify */
- vfy = qib_sd7220_ib_vfy(dd);
+ vfy = qib_sd7220_ib_vfy(dd, fw);
if (vfy != ret) {
qib_dev_err(dd, "SERDES PRAM VFY failed\n");
goto bail;
@@ -506,6 +526,8 @@
done:
/* start relock timer regardless, but start at 1 second */
set_7220_relock_poll(dd, -1);
+
+ release_firmware(fw);
return ret;
}
@@ -829,8 +851,8 @@
#define PROG_CHUNK 64
-int qib_sd7220_prog_ld(struct qib_devdata *dd, int sdnum,
- u8 *img, int len, int offset)
+static int qib_sd7220_prog_ld(struct qib_devdata *dd, int sdnum,
+ const u8 *img, int len, int offset)
{
int cnt, sofar, req;
@@ -840,7 +862,7 @@
if (req > PROG_CHUNK)
req = PROG_CHUNK;
cnt = qib_sd7220_ram_xfer(dd, sdnum, offset + sofar,
- img + sofar, req, 0);
+ (u8 *)img + sofar, req, 0);
if (cnt < req) {
sofar = -1;
break;
@@ -853,8 +875,8 @@
#define VFY_CHUNK 64
#define SD_PRAM_ERROR_LIMIT 42
-int qib_sd7220_prog_vfy(struct qib_devdata *dd, int sdnum,
- const u8 *img, int len, int offset)
+static int qib_sd7220_prog_vfy(struct qib_devdata *dd, int sdnum,
+ const u8 *img, int len, int offset)
{
int cnt, sofar, req, idx, errors;
unsigned char readback[VFY_CHUNK];
@@ -881,6 +903,18 @@
return errors ? -errors : sofar;
}
+static int
+qib_sd7220_ib_load(struct qib_devdata *dd, const struct firmware *fw)
+{
+ return qib_sd7220_prog_ld(dd, IB_7220_SERDES, fw->data, fw->size, 0);
+}
+
+static int
+qib_sd7220_ib_vfy(struct qib_devdata *dd, const struct firmware *fw)
+{
+ return qib_sd7220_prog_vfy(dd, IB_7220_SERDES, fw->data, fw->size, 0);
+}
+
/*
* IRQ not set up at this point in init, so we poll.
*/
diff --git a/drivers/infiniband/hw/qib/qib_sd7220_img.c b/drivers/infiniband/hw/qib/qib_sd7220_img.c
deleted file mode 100644
index a1118fb..0000000
--- a/drivers/infiniband/hw/qib/qib_sd7220_img.c
+++ /dev/null
@@ -1,1081 +0,0 @@
-/*
- * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * This file contains the memory image from the vendor, to be copied into
- * the IB SERDES of the IBA7220 during initialization.
- * The file also includes the two functions which use this image.
- */
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-#include "qib.h"
-#include "qib_7220.h"
-
-static unsigned char qib_sd7220_ib_img[] = {
-/*0000*/0x02, 0x0A, 0x29, 0x02, 0x0A, 0x87, 0xE5, 0xE6,
- 0x30, 0xE6, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F,
-/*0010*/0x00, 0xE5, 0xE2, 0x30, 0xE4, 0x04, 0x7E, 0x01,
- 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x5F, 0x60, 0x08,
-/*0020*/0x53, 0xF9, 0xF7, 0xE4, 0xF5, 0xFE, 0x80, 0x08,
- 0x7F, 0x0A, 0x12, 0x17, 0x31, 0x12, 0x0E, 0xA2,
-/*0030*/0x75, 0xFC, 0x08, 0xE4, 0xF5, 0xFD, 0xE5, 0xE7,
- 0x20, 0xE7, 0x03, 0x43, 0xF9, 0x08, 0x22, 0x00,
-/*0040*/0x01, 0x20, 0x11, 0x00, 0x04, 0x20, 0x00, 0x75,
- 0x51, 0x01, 0xE4, 0xF5, 0x52, 0xF5, 0x53, 0xF5,
-/*0050*/0x52, 0xF5, 0x7E, 0x7F, 0x04, 0x02, 0x04, 0x38,
- 0xC2, 0x36, 0x05, 0x52, 0xE5, 0x52, 0xD3, 0x94,
-/*0060*/0x0C, 0x40, 0x05, 0x75, 0x52, 0x01, 0xD2, 0x36,
- 0x90, 0x07, 0x0C, 0x74, 0x07, 0xF0, 0xA3, 0x74,
-/*0070*/0xFF, 0xF0, 0xE4, 0xF5, 0x0C, 0xA3, 0xF0, 0x90,
- 0x07, 0x14, 0xF0, 0xA3, 0xF0, 0x75, 0x0B, 0x20,
-/*0080*/0xF5, 0x09, 0xE4, 0xF5, 0x08, 0xE5, 0x08, 0xD3,
- 0x94, 0x30, 0x40, 0x03, 0x02, 0x04, 0x04, 0x12,
-/*0090*/0x00, 0x06, 0x15, 0x0B, 0xE5, 0x08, 0x70, 0x04,
- 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x09,
-/*00A0*/0x70, 0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00,
- 0xEE, 0x5F, 0x60, 0x05, 0x12, 0x18, 0x71, 0xD2,
-/*00B0*/0x35, 0x53, 0xE1, 0xF7, 0xE5, 0x08, 0x45, 0x09,
- 0xFF, 0xE5, 0x0B, 0x25, 0xE0, 0x25, 0xE0, 0x24,
-/*00C0*/0x83, 0xF5, 0x82, 0xE4, 0x34, 0x07, 0xF5, 0x83,
- 0xEF, 0xF0, 0x85, 0xE2, 0x20, 0xE5, 0x52, 0xD3,
-/*00D0*/0x94, 0x01, 0x40, 0x0D, 0x12, 0x19, 0xF3, 0xE0,
- 0x54, 0xA0, 0x64, 0x40, 0x70, 0x03, 0x02, 0x03,
-/*00E0*/0xFB, 0x53, 0xF9, 0xF8, 0x90, 0x94, 0x70, 0xE4,
- 0xF0, 0xE0, 0xF5, 0x10, 0xAF, 0x09, 0x12, 0x1E,
-/*00F0*/0xB3, 0xAF, 0x08, 0xEF, 0x44, 0x08, 0xF5, 0x82,
- 0x75, 0x83, 0x80, 0xE0, 0xF5, 0x29, 0xEF, 0x44,
-/*0100*/0x07, 0x12, 0x1A, 0x3C, 0xF5, 0x22, 0x54, 0x40,
- 0xD3, 0x94, 0x00, 0x40, 0x1E, 0xE5, 0x29, 0x54,
-/*0110*/0xF0, 0x70, 0x21, 0x12, 0x19, 0xF3, 0xE0, 0x44,
- 0x80, 0xF0, 0xE5, 0x22, 0x54, 0x30, 0x65, 0x08,
-/*0120*/0x70, 0x09, 0x12, 0x19, 0xF3, 0xE0, 0x54, 0xBF,
- 0xF0, 0x80, 0x09, 0x12, 0x19, 0xF3, 0x74, 0x40,
-/*0130*/0xF0, 0x02, 0x03, 0xFB, 0x12, 0x1A, 0x12, 0x75,
- 0x83, 0xAE, 0x74, 0xFF, 0xF0, 0xAF, 0x08, 0x7E,
-/*0140*/0x00, 0xEF, 0x44, 0x07, 0xF5, 0x82, 0xE0, 0xFD,
- 0xE5, 0x0B, 0x25, 0xE0, 0x25, 0xE0, 0x24, 0x81,
-/*0150*/0xF5, 0x82, 0xE4, 0x34, 0x07, 0xF5, 0x83, 0xED,
- 0xF0, 0x90, 0x07, 0x0E, 0xE0, 0x04, 0xF0, 0xEF,
-/*0160*/0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0x98, 0xE0,
- 0xF5, 0x28, 0x12, 0x1A, 0x23, 0x40, 0x0C, 0x12,
-/*0170*/0x19, 0xF3, 0xE0, 0x44, 0x01, 0x12, 0x1A, 0x32,
- 0x02, 0x03, 0xF6, 0xAF, 0x08, 0x7E, 0x00, 0x74,
-/*0180*/0x80, 0xCD, 0xEF, 0xCD, 0x8D, 0x82, 0xF5, 0x83,
- 0xE0, 0x30, 0xE0, 0x0A, 0x12, 0x19, 0xF3, 0xE0,
-/*0190*/0x44, 0x20, 0xF0, 0x02, 0x03, 0xFB, 0x12, 0x19,
- 0xF3, 0xE0, 0x54, 0xDF, 0xF0, 0xEE, 0x44, 0xAE,
-/*01A0*/0x12, 0x1A, 0x43, 0x30, 0xE4, 0x03, 0x02, 0x03,
- 0xFB, 0x74, 0x9E, 0x12, 0x1A, 0x05, 0x20, 0xE0,
-/*01B0*/0x03, 0x02, 0x03, 0xFB, 0x8F, 0x82, 0x8E, 0x83,
- 0xE0, 0x20, 0xE0, 0x03, 0x02, 0x03, 0xFB, 0x12,
-/*01C0*/0x19, 0xF3, 0xE0, 0x44, 0x10, 0xF0, 0xE5, 0xE3,
- 0x20, 0xE7, 0x08, 0xE5, 0x08, 0x12, 0x1A, 0x3A,
-/*01D0*/0x44, 0x04, 0xF0, 0xAF, 0x08, 0x7E, 0x00, 0xEF,
- 0x12, 0x1A, 0x3A, 0x20, 0xE2, 0x34, 0x12, 0x19,
-/*01E0*/0xF3, 0xE0, 0x44, 0x08, 0xF0, 0xE5, 0xE4, 0x30,
- 0xE6, 0x04, 0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00,
-/*01F0*/0xE5, 0x7E, 0xC3, 0x94, 0x04, 0x50, 0x04, 0x7C,
- 0x01, 0x80, 0x02, 0x7C, 0x00, 0xEC, 0x4D, 0x60,
-/*0200*/0x05, 0xC2, 0x35, 0x02, 0x03, 0xFB, 0xEE, 0x44,
- 0xD2, 0x12, 0x1A, 0x43, 0x44, 0x40, 0xF0, 0x02,
-/*0210*/0x03, 0xFB, 0x12, 0x19, 0xF3, 0xE0, 0x54, 0xF7,
- 0xF0, 0x12, 0x1A, 0x12, 0x75, 0x83, 0xD2, 0xE0,
-/*0220*/0x54, 0xBF, 0xF0, 0x90, 0x07, 0x14, 0xE0, 0x04,
- 0xF0, 0xE5, 0x7E, 0x70, 0x03, 0x75, 0x7E, 0x01,
-/*0230*/0xAF, 0x08, 0x7E, 0x00, 0x12, 0x1A, 0x23, 0x40,
- 0x12, 0x12, 0x19, 0xF3, 0xE0, 0x44, 0x01, 0x12,
-/*0240*/0x19, 0xF2, 0xE0, 0x54, 0x02, 0x12, 0x1A, 0x32,
- 0x02, 0x03, 0xFB, 0x12, 0x19, 0xF3, 0xE0, 0x44,
-/*0250*/0x02, 0x12, 0x19, 0xF2, 0xE0, 0x54, 0xFE, 0xF0,
- 0xC2, 0x35, 0xEE, 0x44, 0x8A, 0x8F, 0x82, 0xF5,
-/*0260*/0x83, 0xE0, 0xF5, 0x17, 0x54, 0x8F, 0x44, 0x40,
- 0xF0, 0x74, 0x90, 0xFC, 0xE5, 0x08, 0x44, 0x07,
-/*0270*/0xFD, 0xF5, 0x82, 0x8C, 0x83, 0xE0, 0x54, 0x3F,
- 0x90, 0x07, 0x02, 0xF0, 0xE0, 0x54, 0xC0, 0x8D,
-/*0280*/0x82, 0x8C, 0x83, 0xF0, 0x74, 0x92, 0x12, 0x1A,
- 0x05, 0x90, 0x07, 0x03, 0x12, 0x1A, 0x19, 0x74,
-/*0290*/0x82, 0x12, 0x1A, 0x05, 0x90, 0x07, 0x04, 0x12,
- 0x1A, 0x19, 0x74, 0xB4, 0x12, 0x1A, 0x05, 0x90,
-/*02A0*/0x07, 0x05, 0x12, 0x1A, 0x19, 0x74, 0x94, 0xFE,
- 0xE5, 0x08, 0x44, 0x06, 0x12, 0x1A, 0x0A, 0xF5,
-/*02B0*/0x10, 0x30, 0xE0, 0x04, 0xD2, 0x37, 0x80, 0x02,
- 0xC2, 0x37, 0xE5, 0x10, 0x54, 0x7F, 0x8F, 0x82,
-/*02C0*/0x8E, 0x83, 0xF0, 0x30, 0x44, 0x30, 0x12, 0x1A,
- 0x03, 0x54, 0x80, 0xD3, 0x94, 0x00, 0x40, 0x04,
-/*02D0*/0xD2, 0x39, 0x80, 0x02, 0xC2, 0x39, 0x8F, 0x82,
- 0x8E, 0x83, 0xE0, 0x44, 0x80, 0xF0, 0x12, 0x1A,
-/*02E0*/0x03, 0x54, 0x40, 0xD3, 0x94, 0x00, 0x40, 0x04,
- 0xD2, 0x3A, 0x80, 0x02, 0xC2, 0x3A, 0x8F, 0x82,
-/*02F0*/0x8E, 0x83, 0xE0, 0x44, 0x40, 0xF0, 0x74, 0x92,
- 0xFE, 0xE5, 0x08, 0x44, 0x06, 0x12, 0x1A, 0x0A,
-/*0300*/0x30, 0xE7, 0x04, 0xD2, 0x38, 0x80, 0x02, 0xC2,
- 0x38, 0x8F, 0x82, 0x8E, 0x83, 0xE0, 0x54, 0x7F,
-/*0310*/0xF0, 0x12, 0x1E, 0x46, 0xE4, 0xF5, 0x0A, 0x20,
- 0x03, 0x02, 0x80, 0x03, 0x30, 0x43, 0x03, 0x12,
-/*0320*/0x19, 0x95, 0x20, 0x02, 0x02, 0x80, 0x03, 0x30,
- 0x42, 0x03, 0x12, 0x0C, 0x8F, 0x30, 0x30, 0x06,
-/*0330*/0x12, 0x19, 0x95, 0x12, 0x0C, 0x8F, 0x12, 0x0D,
- 0x47, 0x12, 0x19, 0xF3, 0xE0, 0x54, 0xFB, 0xF0,
-/*0340*/0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x40, 0x46, 0x43,
- 0xE1, 0x08, 0x12, 0x19, 0xF3, 0xE0, 0x44, 0x04,
-/*0350*/0xF0, 0xE5, 0xE4, 0x20, 0xE7, 0x2A, 0x12, 0x1A,
- 0x12, 0x75, 0x83, 0xD2, 0xE0, 0x54, 0x08, 0xD3,
-/*0360*/0x94, 0x00, 0x40, 0x04, 0x7F, 0x01, 0x80, 0x02,
- 0x7F, 0x00, 0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x40,
-/*0370*/0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEF,
- 0x5E, 0x60, 0x05, 0x12, 0x1D, 0xD7, 0x80, 0x17,
-/*0380*/0x12, 0x1A, 0x12, 0x75, 0x83, 0xD2, 0xE0, 0x44,
- 0x08, 0xF0, 0x02, 0x03, 0xFB, 0x12, 0x1A, 0x12,
-/*0390*/0x75, 0x83, 0xD2, 0xE0, 0x54, 0xF7, 0xF0, 0x12,
- 0x1E, 0x46, 0x7F, 0x08, 0x12, 0x17, 0x31, 0x74,
-/*03A0*/0x8E, 0xFE, 0x12, 0x1A, 0x12, 0x8E, 0x83, 0xE0,
- 0xF5, 0x10, 0x54, 0xFE, 0xF0, 0xE5, 0x10, 0x44,
-/*03B0*/0x01, 0xFF, 0xE5, 0x08, 0xFD, 0xED, 0x44, 0x07,
- 0xF5, 0x82, 0xEF, 0xF0, 0xE5, 0x10, 0x54, 0xFE,
-/*03C0*/0xFF, 0xED, 0x44, 0x07, 0xF5, 0x82, 0xEF, 0x12,
- 0x1A, 0x11, 0x75, 0x83, 0x86, 0xE0, 0x44, 0x10,
-/*03D0*/0x12, 0x1A, 0x11, 0xE0, 0x44, 0x10, 0xF0, 0x12,
- 0x19, 0xF3, 0xE0, 0x54, 0xFD, 0x44, 0x01, 0xFF,
-/*03E0*/0x12, 0x19, 0xF3, 0xEF, 0x12, 0x1A, 0x32, 0x30,
- 0x32, 0x0C, 0xE5, 0x08, 0x44, 0x08, 0xF5, 0x82,
-/*03F0*/0x75, 0x83, 0x82, 0x74, 0x05, 0xF0, 0xAF, 0x0B,
- 0x12, 0x18, 0xD7, 0x74, 0x10, 0x25, 0x08, 0xF5,
-/*0400*/0x08, 0x02, 0x00, 0x85, 0x05, 0x09, 0xE5, 0x09,
- 0xD3, 0x94, 0x07, 0x50, 0x03, 0x02, 0x00, 0x82,
-/*0410*/0xE5, 0x7E, 0xD3, 0x94, 0x00, 0x40, 0x04, 0x7F,
- 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x7E, 0xC3,
-/*0420*/0x94, 0xFA, 0x50, 0x04, 0x7E, 0x01, 0x80, 0x02,
- 0x7E, 0x00, 0xEE, 0x5F, 0x60, 0x02, 0x05, 0x7E,
-/*0430*/0x30, 0x35, 0x0B, 0x43, 0xE1, 0x01, 0x7F, 0x09,
- 0x12, 0x17, 0x31, 0x02, 0x00, 0x58, 0x53, 0xE1,
-/*0440*/0xFE, 0x02, 0x00, 0x58, 0x8E, 0x6A, 0x8F, 0x6B,
- 0x8C, 0x6C, 0x8D, 0x6D, 0x75, 0x6E, 0x01, 0x75,
-/*0450*/0x6F, 0x01, 0x75, 0x70, 0x01, 0xE4, 0xF5, 0x73,
- 0xF5, 0x74, 0xF5, 0x75, 0x90, 0x07, 0x2F, 0xF0,
-/*0460*/0xF5, 0x3C, 0xF5, 0x3E, 0xF5, 0x46, 0xF5, 0x47,
- 0xF5, 0x3D, 0xF5, 0x3F, 0xF5, 0x6F, 0xE5, 0x6F,
-/*0470*/0x70, 0x0F, 0xE5, 0x6B, 0x45, 0x6A, 0x12, 0x07,
- 0x2A, 0x75, 0x83, 0x80, 0x74, 0x3A, 0xF0, 0x80,
-/*0480*/0x09, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x80, 0x74,
- 0x1A, 0xF0, 0xE4, 0xF5, 0x6E, 0xC3, 0x74, 0x3F,
-/*0490*/0x95, 0x6E, 0xFF, 0x12, 0x08, 0x65, 0x75, 0x83,
- 0x82, 0xEF, 0xF0, 0x12, 0x1A, 0x4D, 0x12, 0x08,
-/*04A0*/0xC6, 0xE5, 0x33, 0xF0, 0x12, 0x08, 0xFA, 0x12,
- 0x08, 0xB1, 0x40, 0xE1, 0xE5, 0x6F, 0x70, 0x0B,
-/*04B0*/0x12, 0x07, 0x2A, 0x75, 0x83, 0x80, 0x74, 0x36,
- 0xF0, 0x80, 0x09, 0x12, 0x07, 0x2A, 0x75, 0x83,
-/*04C0*/0x80, 0x74, 0x16, 0xF0, 0x75, 0x6E, 0x01, 0x12,
- 0x07, 0x2A, 0x75, 0x83, 0xB4, 0xE5, 0x6E, 0xF0,
-/*04D0*/0x12, 0x1A, 0x4D, 0x74, 0x3F, 0x25, 0x6E, 0xF5,
- 0x82, 0xE4, 0x34, 0x00, 0xF5, 0x83, 0xE5, 0x33,
-/*04E0*/0xF0, 0x74, 0xBF, 0x25, 0x6E, 0xF5, 0x82, 0xE4,
- 0x34, 0x00, 0x12, 0x08, 0xB1, 0x40, 0xD8, 0xE4,
-/*04F0*/0xF5, 0x70, 0xF5, 0x46, 0xF5, 0x47, 0xF5, 0x6E,
- 0x12, 0x08, 0xFA, 0xF5, 0x83, 0xE0, 0xFE, 0x12,
-/*0500*/0x08, 0xC6, 0xE0, 0x7C, 0x00, 0x24, 0x00, 0xFF,
- 0xEC, 0x3E, 0xFE, 0xAD, 0x3B, 0xD3, 0xEF, 0x9D,
-/*0510*/0xEE, 0x9C, 0x50, 0x04, 0x7B, 0x01, 0x80, 0x02,
- 0x7B, 0x00, 0xE5, 0x70, 0x70, 0x04, 0x7A, 0x01,
-/*0520*/0x80, 0x02, 0x7A, 0x00, 0xEB, 0x5A, 0x60, 0x06,
- 0x85, 0x6E, 0x46, 0x75, 0x70, 0x01, 0xD3, 0xEF,
-/*0530*/0x9D, 0xEE, 0x9C, 0x50, 0x04, 0x7F, 0x01, 0x80,
- 0x02, 0x7F, 0x00, 0xE5, 0x70, 0xB4, 0x01, 0x04,
-/*0540*/0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEF, 0x5E,
- 0x60, 0x03, 0x85, 0x6E, 0x47, 0x05, 0x6E, 0xE5,
-/*0550*/0x6E, 0x64, 0x7F, 0x70, 0xA3, 0xE5, 0x46, 0x60,
- 0x05, 0xE5, 0x47, 0xB4, 0x7E, 0x03, 0x85, 0x46,
-/*0560*/0x47, 0xE5, 0x6F, 0x70, 0x08, 0x85, 0x46, 0x76,
- 0x85, 0x47, 0x77, 0x80, 0x0E, 0xC3, 0x74, 0x7F,
-/*0570*/0x95, 0x46, 0xF5, 0x78, 0xC3, 0x74, 0x7F, 0x95,
- 0x47, 0xF5, 0x79, 0xE5, 0x6F, 0x70, 0x37, 0xE5,
-/*0580*/0x46, 0x65, 0x47, 0x70, 0x0C, 0x75, 0x73, 0x01,
- 0x75, 0x74, 0x01, 0xF5, 0x3C, 0xF5, 0x3D, 0x80,
-/*0590*/0x35, 0xE4, 0xF5, 0x4E, 0xC3, 0xE5, 0x47, 0x95,
- 0x46, 0xF5, 0x3C, 0xC3, 0x13, 0xF5, 0x71, 0x25,
-/*05A0*/0x46, 0xF5, 0x72, 0xC3, 0x94, 0x3F, 0x40, 0x05,
- 0xE4, 0xF5, 0x3D, 0x80, 0x40, 0xC3, 0x74, 0x3F,
-/*05B0*/0x95, 0x72, 0xF5, 0x3D, 0x80, 0x37, 0xE5, 0x46,
- 0x65, 0x47, 0x70, 0x0F, 0x75, 0x73, 0x01, 0x75,
-/*05C0*/0x75, 0x01, 0xF5, 0x3E, 0xF5, 0x3F, 0x75, 0x4E,
- 0x01, 0x80, 0x22, 0xE4, 0xF5, 0x4E, 0xC3, 0xE5,
-/*05D0*/0x47, 0x95, 0x46, 0xF5, 0x3E, 0xC3, 0x13, 0xF5,
- 0x71, 0x25, 0x46, 0xF5, 0x72, 0xD3, 0x94, 0x3F,
-/*05E0*/0x50, 0x05, 0xE4, 0xF5, 0x3F, 0x80, 0x06, 0xE5,
- 0x72, 0x24, 0xC1, 0xF5, 0x3F, 0x05, 0x6F, 0xE5,
-/*05F0*/0x6F, 0xC3, 0x94, 0x02, 0x50, 0x03, 0x02, 0x04,
- 0x6E, 0xE5, 0x6D, 0x45, 0x6C, 0x70, 0x02, 0x80,
-/*0600*/0x04, 0xE5, 0x74, 0x45, 0x75, 0x90, 0x07, 0x2F,
- 0xF0, 0x7F, 0x01, 0xE5, 0x3E, 0x60, 0x04, 0xE5,
-/*0610*/0x3C, 0x70, 0x14, 0xE4, 0xF5, 0x3C, 0xF5, 0x3D,
- 0xF5, 0x3E, 0xF5, 0x3F, 0x12, 0x08, 0xD2, 0x70,
-/*0620*/0x04, 0xF0, 0x02, 0x06, 0xA4, 0x80, 0x7A, 0xE5,
- 0x3C, 0xC3, 0x95, 0x3E, 0x40, 0x07, 0xE5, 0x3C,
-/*0630*/0x95, 0x3E, 0xFF, 0x80, 0x06, 0xC3, 0xE5, 0x3E,
- 0x95, 0x3C, 0xFF, 0xE5, 0x76, 0xD3, 0x95, 0x79,
-/*0640*/0x40, 0x05, 0x85, 0x76, 0x7A, 0x80, 0x03, 0x85,
- 0x79, 0x7A, 0xE5, 0x77, 0xC3, 0x95, 0x78, 0x50,
-/*0650*/0x05, 0x85, 0x77, 0x7B, 0x80, 0x03, 0x85, 0x78,
- 0x7B, 0xE5, 0x7B, 0xD3, 0x95, 0x7A, 0x40, 0x30,
-/*0660*/0xE5, 0x7B, 0x95, 0x7A, 0xF5, 0x3C, 0xF5, 0x3E,
- 0xC3, 0xE5, 0x7B, 0x95, 0x7A, 0x90, 0x07, 0x19,
-/*0670*/0xF0, 0xE5, 0x3C, 0xC3, 0x13, 0xF5, 0x71, 0x25,
- 0x7A, 0xF5, 0x72, 0xC3, 0x94, 0x3F, 0x40, 0x05,
-/*0680*/0xE4, 0xF5, 0x3D, 0x80, 0x1F, 0xC3, 0x74, 0x3F,
- 0x95, 0x72, 0xF5, 0x3D, 0xF5, 0x3F, 0x80, 0x14,
-/*0690*/0xE4, 0xF5, 0x3C, 0xF5, 0x3E, 0x90, 0x07, 0x19,
- 0xF0, 0x12, 0x08, 0xD2, 0x70, 0x03, 0xF0, 0x80,
-/*06A0*/0x03, 0x74, 0x01, 0xF0, 0x12, 0x08, 0x65, 0x75,
- 0x83, 0xD0, 0xE0, 0x54, 0x0F, 0xFE, 0xAD, 0x3C,
-/*06B0*/0x70, 0x02, 0x7E, 0x07, 0xBE, 0x0F, 0x02, 0x7E,
- 0x80, 0xEE, 0xFB, 0xEF, 0xD3, 0x9B, 0x74, 0x80,
-/*06C0*/0xF8, 0x98, 0x40, 0x1F, 0xE4, 0xF5, 0x3C, 0xF5,
- 0x3E, 0x12, 0x08, 0xD2, 0x70, 0x03, 0xF0, 0x80,
-/*06D0*/0x12, 0x74, 0x01, 0xF0, 0xE5, 0x08, 0xFB, 0xEB,
- 0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0xD2, 0xE0,
-/*06E0*/0x44, 0x10, 0xF0, 0xE5, 0x08, 0xFB, 0xEB, 0x44,
- 0x09, 0xF5, 0x82, 0x75, 0x83, 0x9E, 0xED, 0xF0,
-/*06F0*/0xEB, 0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0xCA,
- 0xED, 0xF0, 0x12, 0x08, 0x65, 0x75, 0x83, 0xCC,
-/*0700*/0xEF, 0xF0, 0x22, 0xE5, 0x08, 0x44, 0x07, 0xF5,
- 0x82, 0x75, 0x83, 0xBC, 0xE0, 0x54, 0xF0, 0xF0,
-/*0710*/0xE5, 0x08, 0x44, 0x07, 0xF5, 0x82, 0x75, 0x83,
- 0xBE, 0xE0, 0x54, 0xF0, 0xF0, 0xE5, 0x08, 0x44,
-/*0720*/0x07, 0xF5, 0x82, 0x75, 0x83, 0xC0, 0xE0, 0x54,
- 0xF0, 0xF0, 0xE5, 0x08, 0x44, 0x07, 0xF5, 0x82,
-/*0730*/0x22, 0xF0, 0x90, 0x07, 0x28, 0xE0, 0xFE, 0xA3,
- 0xE0, 0xF5, 0x82, 0x8E, 0x83, 0x22, 0x85, 0x42,
-/*0740*/0x42, 0x85, 0x41, 0x41, 0x85, 0x40, 0x40, 0x74,
- 0xC0, 0x2F, 0xF5, 0x82, 0x74, 0x02, 0x3E, 0xF5,
-/*0750*/0x83, 0xE5, 0x42, 0xF0, 0x74, 0xE0, 0x2F, 0xF5,
- 0x82, 0x74, 0x02, 0x3E, 0xF5, 0x83, 0x22, 0xE5,
-/*0760*/0x42, 0x29, 0xFD, 0xE4, 0x33, 0xFC, 0xE5, 0x3C,
- 0xC3, 0x9D, 0xEC, 0x64, 0x80, 0xF8, 0x74, 0x80,
-/*0770*/0x98, 0x22, 0xF5, 0x83, 0xE0, 0x90, 0x07, 0x22,
- 0x54, 0x1F, 0xFD, 0xE0, 0xFA, 0xA3, 0xE0, 0xF5,
-/*0780*/0x82, 0x8A, 0x83, 0xED, 0xF0, 0x22, 0x90, 0x07,
- 0x22, 0xE0, 0xFC, 0xA3, 0xE0, 0xF5, 0x82, 0x8C,
-/*0790*/0x83, 0x22, 0x90, 0x07, 0x24, 0xFF, 0xED, 0x44,
- 0x07, 0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0x22, 0x85,
-/*07A0*/0x38, 0x38, 0x85, 0x39, 0x39, 0x85, 0x3A, 0x3A,
- 0x74, 0xC0, 0x2F, 0xF5, 0x82, 0x74, 0x02, 0x3E,
-/*07B0*/0xF5, 0x83, 0x22, 0x90, 0x07, 0x26, 0xFF, 0xED,
- 0x44, 0x07, 0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0x22,
-/*07C0*/0xF0, 0x74, 0xA0, 0x2F, 0xF5, 0x82, 0x74, 0x02,
- 0x3E, 0xF5, 0x83, 0x22, 0x74, 0xC0, 0x25, 0x11,
-/*07D0*/0xF5, 0x82, 0xE4, 0x34, 0x01, 0xF5, 0x83, 0x22,
- 0x74, 0x00, 0x25, 0x11, 0xF5, 0x82, 0xE4, 0x34,
-/*07E0*/0x02, 0xF5, 0x83, 0x22, 0x74, 0x60, 0x25, 0x11,
- 0xF5, 0x82, 0xE4, 0x34, 0x03, 0xF5, 0x83, 0x22,
-/*07F0*/0x74, 0x80, 0x25, 0x11, 0xF5, 0x82, 0xE4, 0x34,
- 0x03, 0xF5, 0x83, 0x22, 0x74, 0xE0, 0x25, 0x11,
-/*0800*/0xF5, 0x82, 0xE4, 0x34, 0x03, 0xF5, 0x83, 0x22,
- 0x74, 0x40, 0x25, 0x11, 0xF5, 0x82, 0xE4, 0x34,
-/*0810*/0x06, 0xF5, 0x83, 0x22, 0x74, 0x80, 0x2F, 0xF5,
- 0x82, 0x74, 0x02, 0x3E, 0xF5, 0x83, 0x22, 0xAF,
-/*0820*/0x08, 0x7E, 0x00, 0xEF, 0x44, 0x07, 0xF5, 0x82,
- 0x22, 0xF5, 0x83, 0xE5, 0x82, 0x44, 0x07, 0xF5,
-/*0830*/0x82, 0xE5, 0x40, 0xF0, 0x22, 0x74, 0x40, 0x25,
- 0x11, 0xF5, 0x82, 0xE4, 0x34, 0x02, 0xF5, 0x83,
-/*0840*/0x22, 0x74, 0xC0, 0x25, 0x11, 0xF5, 0x82, 0xE4,
- 0x34, 0x03, 0xF5, 0x83, 0x22, 0x74, 0x00, 0x25,
-/*0850*/0x11, 0xF5, 0x82, 0xE4, 0x34, 0x06, 0xF5, 0x83,
- 0x22, 0x74, 0x20, 0x25, 0x11, 0xF5, 0x82, 0xE4,
-/*0860*/0x34, 0x06, 0xF5, 0x83, 0x22, 0xE5, 0x08, 0xFD,
- 0xED, 0x44, 0x07, 0xF5, 0x82, 0x22, 0xE5, 0x41,
-/*0870*/0xF0, 0xE5, 0x65, 0x64, 0x01, 0x45, 0x64, 0x22,
- 0x7E, 0x00, 0xFB, 0x7A, 0x00, 0xFD, 0x7C, 0x00,
-/*0880*/0x22, 0x74, 0x20, 0x25, 0x11, 0xF5, 0x82, 0xE4,
- 0x34, 0x02, 0x22, 0x74, 0xA0, 0x25, 0x11, 0xF5,
-/*0890*/0x82, 0xE4, 0x34, 0x03, 0x22, 0x85, 0x3E, 0x42,
- 0x85, 0x3F, 0x41, 0x8F, 0x40, 0x22, 0x85, 0x3C,
-/*08A0*/0x42, 0x85, 0x3D, 0x41, 0x8F, 0x40, 0x22, 0x75,
- 0x45, 0x3F, 0x90, 0x07, 0x20, 0xE4, 0xF0, 0xA3,
-/*08B0*/0x22, 0xF5, 0x83, 0xE5, 0x32, 0xF0, 0x05, 0x6E,
- 0xE5, 0x6E, 0xC3, 0x94, 0x40, 0x22, 0xF0, 0xE5,
-/*08C0*/0x08, 0x44, 0x06, 0xF5, 0x82, 0x22, 0x74, 0x00,
- 0x25, 0x6E, 0xF5, 0x82, 0xE4, 0x34, 0x00, 0xF5,
-/*08D0*/0x83, 0x22, 0xE5, 0x6D, 0x45, 0x6C, 0x90, 0x07,
- 0x2F, 0x22, 0xE4, 0xF9, 0xE5, 0x3C, 0xD3, 0x95,
-/*08E0*/0x3E, 0x22, 0x74, 0x80, 0x2E, 0xF5, 0x82, 0xE4,
- 0x34, 0x02, 0xF5, 0x83, 0xE0, 0x22, 0x74, 0xA0,
-/*08F0*/0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x02, 0xF5, 0x83,
- 0xE0, 0x22, 0x74, 0x80, 0x25, 0x6E, 0xF5, 0x82,
-/*0900*/0xE4, 0x34, 0x00, 0x22, 0x25, 0x42, 0xFD, 0xE4,
- 0x33, 0xFC, 0x22, 0x85, 0x42, 0x42, 0x85, 0x41,
-/*0910*/0x41, 0x85, 0x40, 0x40, 0x22, 0xED, 0x4C, 0x60,
- 0x03, 0x02, 0x09, 0xE5, 0xEF, 0x4E, 0x70, 0x37,
-/*0920*/0x90, 0x07, 0x26, 0x12, 0x07, 0x89, 0xE0, 0xFD,
- 0x12, 0x07, 0xCC, 0xED, 0xF0, 0x90, 0x07, 0x28,
-/*0930*/0x12, 0x07, 0x89, 0xE0, 0xFD, 0x12, 0x07, 0xD8,
- 0xED, 0xF0, 0x12, 0x07, 0x86, 0xE0, 0x54, 0x1F,
-/*0940*/0xFD, 0x12, 0x08, 0x81, 0xF5, 0x83, 0xED, 0xF0,
- 0x90, 0x07, 0x24, 0x12, 0x07, 0x89, 0xE0, 0x54,
-/*0950*/0x1F, 0xFD, 0x12, 0x08, 0x35, 0xED, 0xF0, 0xEF,
- 0x64, 0x04, 0x4E, 0x70, 0x37, 0x90, 0x07, 0x26,
-/*0960*/0x12, 0x07, 0x89, 0xE0, 0xFD, 0x12, 0x07, 0xE4,
- 0xED, 0xF0, 0x90, 0x07, 0x28, 0x12, 0x07, 0x89,
-/*0970*/0xE0, 0xFD, 0x12, 0x07, 0xF0, 0xED, 0xF0, 0x12,
- 0x07, 0x86, 0xE0, 0x54, 0x1F, 0xFD, 0x12, 0x08,
-/*0980*/0x8B, 0xF5, 0x83, 0xED, 0xF0, 0x90, 0x07, 0x24,
- 0x12, 0x07, 0x89, 0xE0, 0x54, 0x1F, 0xFD, 0x12,
-/*0990*/0x08, 0x41, 0xED, 0xF0, 0xEF, 0x64, 0x01, 0x4E,
- 0x70, 0x04, 0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00,
-/*09A0*/0xEF, 0x64, 0x02, 0x4E, 0x70, 0x04, 0x7F, 0x01,
- 0x80, 0x02, 0x7F, 0x00, 0xEF, 0x4D, 0x60, 0x78,
-/*09B0*/0x90, 0x07, 0x26, 0x12, 0x07, 0x35, 0xE0, 0xFF,
- 0x12, 0x07, 0xFC, 0xEF, 0x12, 0x07, 0x31, 0xE0,
-/*09C0*/0xFF, 0x12, 0x08, 0x08, 0xEF, 0xF0, 0x90, 0x07,
- 0x22, 0x12, 0x07, 0x35, 0xE0, 0x54, 0x1F, 0xFF,
-/*09D0*/0x12, 0x08, 0x4D, 0xEF, 0xF0, 0x90, 0x07, 0x24,
- 0x12, 0x07, 0x35, 0xE0, 0x54, 0x1F, 0xFF, 0x12,
-/*09E0*/0x08, 0x59, 0xEF, 0xF0, 0x22, 0x12, 0x07, 0xCC,
- 0xE4, 0xF0, 0x12, 0x07, 0xD8, 0xE4, 0xF0, 0x12,
-/*09F0*/0x08, 0x81, 0xF5, 0x83, 0xE4, 0xF0, 0x12, 0x08,
- 0x35, 0x74, 0x14, 0xF0, 0x12, 0x07, 0xE4, 0xE4,
-/*0A00*/0xF0, 0x12, 0x07, 0xF0, 0xE4, 0xF0, 0x12, 0x08,
- 0x8B, 0xF5, 0x83, 0xE4, 0xF0, 0x12, 0x08, 0x41,
-/*0A10*/0x74, 0x14, 0xF0, 0x12, 0x07, 0xFC, 0xE4, 0xF0,
- 0x12, 0x08, 0x08, 0xE4, 0xF0, 0x12, 0x08, 0x4D,
-/*0A20*/0xE4, 0xF0, 0x12, 0x08, 0x59, 0x74, 0x14, 0xF0,
- 0x22, 0x53, 0xF9, 0xF7, 0x75, 0xFC, 0x10, 0xE4,
-/*0A30*/0xF5, 0xFD, 0x75, 0xFE, 0x30, 0xF5, 0xFF, 0xE5,
- 0xE7, 0x20, 0xE7, 0x03, 0x43, 0xF9, 0x08, 0xE5,
-/*0A40*/0xE6, 0x20, 0xE7, 0x0B, 0x78, 0xFF, 0xE4, 0xF6,
- 0xD8, 0xFD, 0x53, 0xE6, 0xFE, 0x80, 0x09, 0x78,
-/*0A50*/0x08, 0xE4, 0xF6, 0xD8, 0xFD, 0x53, 0xE6, 0xFE,
- 0x75, 0x81, 0x80, 0xE4, 0xF5, 0xA8, 0xD2, 0xA8,
-/*0A60*/0xC2, 0xA9, 0xD2, 0xAF, 0xE5, 0xE2, 0x20, 0xE5,
- 0x05, 0x20, 0xE6, 0x02, 0x80, 0x03, 0x43, 0xE1,
-/*0A70*/0x02, 0xE5, 0xE2, 0x20, 0xE0, 0x0E, 0x90, 0x00,
- 0x00, 0x7F, 0x00, 0x7E, 0x08, 0xE4, 0xF0, 0xA3,
-/*0A80*/0xDF, 0xFC, 0xDE, 0xFA, 0x02, 0x0A, 0xDB, 0x43,
- 0xFA, 0x01, 0xC0, 0xE0, 0xC0, 0xF0, 0xC0, 0x83,
-/*0A90*/0xC0, 0x82, 0xC0, 0xD0, 0x12, 0x1C, 0xE7, 0xD0,
- 0xD0, 0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xF0, 0xD0,
-/*0AA0*/0xE0, 0x53, 0xFA, 0xFE, 0x32, 0x02, 0x1B, 0x55,
- 0xE4, 0x93, 0xA3, 0xF8, 0xE4, 0x93, 0xA3, 0xF6,
-/*0AB0*/0x08, 0xDF, 0xF9, 0x80, 0x29, 0xE4, 0x93, 0xA3,
- 0xF8, 0x54, 0x07, 0x24, 0x0C, 0xC8, 0xC3, 0x33,
-/*0AC0*/0xC4, 0x54, 0x0F, 0x44, 0x20, 0xC8, 0x83, 0x40,
- 0x04, 0xF4, 0x56, 0x80, 0x01, 0x46, 0xF6, 0xDF,
-/*0AD0*/0xE4, 0x80, 0x0B, 0x01, 0x02, 0x04, 0x08, 0x10,
- 0x20, 0x40, 0x80, 0x90, 0x00, 0x3F, 0xE4, 0x7E,
-/*0AE0*/0x01, 0x93, 0x60, 0xC1, 0xA3, 0xFF, 0x54, 0x3F,
- 0x30, 0xE5, 0x09, 0x54, 0x1F, 0xFE, 0xE4, 0x93,
-/*0AF0*/0xA3, 0x60, 0x01, 0x0E, 0xCF, 0x54, 0xC0, 0x25,
- 0xE0, 0x60, 0xAD, 0x40, 0xB8, 0x80, 0xFE, 0x8C,
-/*0B00*/0x64, 0x8D, 0x65, 0x8A, 0x66, 0x8B, 0x67, 0xE4,
- 0xF5, 0x69, 0xEF, 0x4E, 0x70, 0x03, 0x02, 0x1D,
-/*0B10*/0x55, 0xE4, 0xF5, 0x68, 0xE5, 0x67, 0x45, 0x66,
- 0x70, 0x32, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x90,
-/*0B20*/0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2, 0xE4,
- 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0xE4, 0x12,
-/*0B30*/0x08, 0x70, 0x70, 0x29, 0x12, 0x07, 0x2A, 0x75,
- 0x83, 0x92, 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83,
-/*0B40*/0xC6, 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC8,
- 0xE4, 0xF0, 0x80, 0x11, 0x90, 0x07, 0x26, 0x12,
-/*0B50*/0x07, 0x35, 0xE4, 0x12, 0x08, 0x70, 0x70, 0x05,
- 0x12, 0x07, 0x32, 0xE4, 0xF0, 0x12, 0x1D, 0x55,
-/*0B60*/0x12, 0x1E, 0xBF, 0xE5, 0x67, 0x45, 0x66, 0x70,
- 0x33, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x90, 0xE5,
-/*0B70*/0x41, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2, 0xE5,
- 0x41, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0x12,
-/*0B80*/0x08, 0x6E, 0x70, 0x29, 0x12, 0x07, 0x2A, 0x75,
- 0x83, 0x92, 0xE5, 0x40, 0x12, 0x07, 0x29, 0x75,
-/*0B90*/0x83, 0xC6, 0xE5, 0x40, 0x12, 0x07, 0x29, 0x75,
- 0x83, 0xC8, 0x80, 0x0E, 0x90, 0x07, 0x26, 0x12,
-/*0BA0*/0x07, 0x35, 0x12, 0x08, 0x6E, 0x70, 0x06, 0x12,
- 0x07, 0x32, 0xE5, 0x40, 0xF0, 0xAF, 0x69, 0x7E,
-/*0BB0*/0x00, 0xAD, 0x67, 0xAC, 0x66, 0x12, 0x04, 0x44,
- 0x12, 0x07, 0x2A, 0x75, 0x83, 0xCA, 0xE0, 0xD3,
-/*0BC0*/0x94, 0x00, 0x50, 0x0C, 0x05, 0x68, 0xE5, 0x68,
- 0xC3, 0x94, 0x05, 0x50, 0x03, 0x02, 0x0B, 0x14,
-/*0BD0*/0x22, 0x8C, 0x60, 0x8D, 0x61, 0x12, 0x08, 0xDA,
- 0x74, 0x20, 0x40, 0x0D, 0x2F, 0xF5, 0x82, 0x74,
-/*0BE0*/0x03, 0x3E, 0xF5, 0x83, 0xE5, 0x3E, 0xF0, 0x80,
- 0x0B, 0x2F, 0xF5, 0x82, 0x74, 0x03, 0x3E, 0xF5,
-/*0BF0*/0x83, 0xE5, 0x3C, 0xF0, 0xE5, 0x3C, 0xD3, 0x95,
- 0x3E, 0x40, 0x3C, 0xE5, 0x61, 0x45, 0x60, 0x70,
-/*0C00*/0x10, 0xE9, 0x12, 0x09, 0x04, 0xE5, 0x3E, 0x12,
- 0x07, 0x68, 0x40, 0x3B, 0x12, 0x08, 0x95, 0x80,
-/*0C10*/0x18, 0xE5, 0x3E, 0xC3, 0x95, 0x38, 0x40, 0x1D,
- 0x85, 0x3E, 0x38, 0xE5, 0x3E, 0x60, 0x05, 0x85,
-/*0C20*/0x3F, 0x39, 0x80, 0x03, 0x85, 0x39, 0x39, 0x8F,
- 0x3A, 0x12, 0x08, 0x14, 0xE5, 0x3E, 0x12, 0x07,
-/*0C30*/0xC0, 0xE5, 0x3F, 0xF0, 0x22, 0x80, 0x43, 0xE5,
- 0x61, 0x45, 0x60, 0x70, 0x19, 0x12, 0x07, 0x5F,
-/*0C40*/0x40, 0x05, 0x12, 0x08, 0x9E, 0x80, 0x27, 0x12,
- 0x09, 0x0B, 0x12, 0x08, 0x14, 0xE5, 0x42, 0x12,
-/*0C50*/0x07, 0xC0, 0xE5, 0x41, 0xF0, 0x22, 0xE5, 0x3C,
- 0xC3, 0x95, 0x38, 0x40, 0x1D, 0x85, 0x3C, 0x38,
-/*0C60*/0xE5, 0x3C, 0x60, 0x05, 0x85, 0x3D, 0x39, 0x80,
- 0x03, 0x85, 0x39, 0x39, 0x8F, 0x3A, 0x12, 0x08,
-/*0C70*/0x14, 0xE5, 0x3C, 0x12, 0x07, 0xC0, 0xE5, 0x3D,
- 0xF0, 0x22, 0x85, 0x38, 0x38, 0x85, 0x39, 0x39,
-/*0C80*/0x85, 0x3A, 0x3A, 0x12, 0x08, 0x14, 0xE5, 0x38,
- 0x12, 0x07, 0xC0, 0xE5, 0x39, 0xF0, 0x22, 0x7F,
-/*0C90*/0x06, 0x12, 0x17, 0x31, 0x12, 0x1D, 0x23, 0x12,
- 0x0E, 0x04, 0x12, 0x0E, 0x33, 0xE0, 0x44, 0x0A,
-/*0CA0*/0xF0, 0x74, 0x8E, 0xFE, 0x12, 0x0E, 0x04, 0x12,
- 0x0E, 0x0B, 0xEF, 0xF0, 0xE5, 0x28, 0x30, 0xE5,
-/*0CB0*/0x03, 0xD3, 0x80, 0x01, 0xC3, 0x40, 0x05, 0x75,
- 0x14, 0x20, 0x80, 0x03, 0x75, 0x14, 0x08, 0x12,
-/*0CC0*/0x0E, 0x04, 0x75, 0x83, 0x8A, 0xE5, 0x14, 0xF0,
- 0xB4, 0xFF, 0x05, 0x75, 0x12, 0x80, 0x80, 0x06,
-/*0CD0*/0xE5, 0x14, 0xC3, 0x13, 0xF5, 0x12, 0xE4, 0xF5,
- 0x16, 0xF5, 0x7F, 0x12, 0x19, 0x36, 0x12, 0x13,
-/*0CE0*/0xA3, 0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x50, 0x09,
- 0x05, 0x16, 0xE5, 0x16, 0xC3, 0x94, 0x14, 0x40,
-/*0CF0*/0xEA, 0xE5, 0xE4, 0x20, 0xE7, 0x28, 0x12, 0x0E,
- 0x04, 0x75, 0x83, 0xD2, 0xE0, 0x54, 0x08, 0xD3,
-/*0D00*/0x94, 0x00, 0x40, 0x04, 0x7F, 0x01, 0x80, 0x02,
- 0x7F, 0x00, 0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x40,
-/*0D10*/0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEF,
- 0x5E, 0x60, 0x03, 0x12, 0x1D, 0xD7, 0xE5, 0x7F,
-/*0D20*/0xC3, 0x94, 0x11, 0x40, 0x14, 0x12, 0x0E, 0x04,
- 0x75, 0x83, 0xD2, 0xE0, 0x44, 0x80, 0xF0, 0xE5,
-/*0D30*/0xE4, 0x20, 0xE7, 0x0F, 0x12, 0x1D, 0xD7, 0x80,
- 0x0A, 0x12, 0x0E, 0x04, 0x75, 0x83, 0xD2, 0xE0,
-/*0D40*/0x54, 0x7F, 0xF0, 0x12, 0x1D, 0x23, 0x22, 0x74,
- 0x8A, 0x85, 0x08, 0x82, 0xF5, 0x83, 0xE5, 0x17,
-/*0D50*/0xF0, 0x12, 0x0E, 0x3A, 0xE4, 0xF0, 0x90, 0x07,
- 0x02, 0xE0, 0x12, 0x0E, 0x17, 0x75, 0x83, 0x90,
-/*0D60*/0xEF, 0xF0, 0x74, 0x92, 0xFE, 0xE5, 0x08, 0x44,
- 0x07, 0xFF, 0xF5, 0x82, 0x8E, 0x83, 0xE0, 0x54,
-/*0D70*/0xC0, 0xFD, 0x90, 0x07, 0x03, 0xE0, 0x54, 0x3F,
- 0x4D, 0x8F, 0x82, 0x8E, 0x83, 0xF0, 0x90, 0x07,
-/*0D80*/0x04, 0xE0, 0x12, 0x0E, 0x17, 0x75, 0x83, 0x82,
- 0xEF, 0xF0, 0x90, 0x07, 0x05, 0xE0, 0xFF, 0xED,
-/*0D90*/0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0xB4, 0xEF,
- 0x12, 0x0E, 0x03, 0x75, 0x83, 0x80, 0xE0, 0x54,
-/*0DA0*/0xBF, 0xF0, 0x30, 0x37, 0x0A, 0x12, 0x0E, 0x91,
- 0x75, 0x83, 0x94, 0xE0, 0x44, 0x80, 0xF0, 0x30,
-/*0DB0*/0x38, 0x0A, 0x12, 0x0E, 0x91, 0x75, 0x83, 0x92,
- 0xE0, 0x44, 0x80, 0xF0, 0xE5, 0x28, 0x30, 0xE4,
-/*0DC0*/0x1A, 0x20, 0x39, 0x0A, 0x12, 0x0E, 0x04, 0x75,
- 0x83, 0x88, 0xE0, 0x54, 0x7F, 0xF0, 0x20, 0x3A,
-/*0DD0*/0x0A, 0x12, 0x0E, 0x04, 0x75, 0x83, 0x88, 0xE0,
- 0x54, 0xBF, 0xF0, 0x74, 0x8C, 0xFE, 0x12, 0x0E,
-/*0DE0*/0x04, 0x8E, 0x83, 0xE0, 0x54, 0x0F, 0x12, 0x0E,
- 0x03, 0x75, 0x83, 0x86, 0xE0, 0x54, 0xBF, 0xF0,
-/*0DF0*/0xE5, 0x08, 0x44, 0x06, 0x12, 0x0D, 0xFD, 0x75,
- 0x83, 0x8A, 0xE4, 0xF0, 0x22, 0xF5, 0x82, 0x75,
-/*0E00*/0x83, 0x82, 0xE4, 0xF0, 0xE5, 0x08, 0x44, 0x07,
- 0xF5, 0x82, 0x22, 0x8E, 0x83, 0xE0, 0xF5, 0x10,
-/*0E10*/0x54, 0xFE, 0xF0, 0xE5, 0x10, 0x44, 0x01, 0xFF,
- 0xE5, 0x08, 0xFD, 0xED, 0x44, 0x07, 0xF5, 0x82,
-/*0E20*/0x22, 0xE5, 0x15, 0xC4, 0x54, 0x07, 0xFF, 0xE5,
- 0x08, 0xFD, 0xED, 0x44, 0x08, 0xF5, 0x82, 0x75,
-/*0E30*/0x83, 0x82, 0x22, 0x75, 0x83, 0x80, 0xE0, 0x44,
- 0x40, 0xF0, 0xE5, 0x08, 0x44, 0x08, 0xF5, 0x82,
-/*0E40*/0x75, 0x83, 0x8A, 0x22, 0xE5, 0x16, 0x25, 0xE0,
- 0x25, 0xE0, 0x24, 0xAF, 0xF5, 0x82, 0xE4, 0x34,
-/*0E50*/0x1A, 0xF5, 0x83, 0xE4, 0x93, 0xF5, 0x0D, 0x22,
- 0x43, 0xE1, 0x10, 0x43, 0xE1, 0x80, 0x53, 0xE1,
-/*0E60*/0xFD, 0x85, 0xE1, 0x10, 0x22, 0xE5, 0x16, 0x25,
- 0xE0, 0x25, 0xE0, 0x24, 0xB2, 0xF5, 0x82, 0xE4,
-/*0E70*/0x34, 0x1A, 0xF5, 0x83, 0xE4, 0x93, 0x22, 0x85,
- 0x55, 0x82, 0x85, 0x54, 0x83, 0xE5, 0x15, 0xF0,
-/*0E80*/0x22, 0xE5, 0xE2, 0x54, 0x20, 0xD3, 0x94, 0x00,
- 0x22, 0xE5, 0xE2, 0x54, 0x40, 0xD3, 0x94, 0x00,
-/*0E90*/0x22, 0xE5, 0x08, 0x44, 0x06, 0xF5, 0x82, 0x22,
- 0xFD, 0xE5, 0x08, 0xFB, 0xEB, 0x44, 0x07, 0xF5,
-/*0EA0*/0x82, 0x22, 0x53, 0xF9, 0xF7, 0x75, 0xFE, 0x30,
- 0x22, 0xEF, 0x4E, 0x70, 0x26, 0x12, 0x07, 0xCC,
-/*0EB0*/0xE0, 0xFD, 0x90, 0x07, 0x26, 0x12, 0x07, 0x7B,
- 0x12, 0x07, 0xD8, 0xE0, 0xFD, 0x90, 0x07, 0x28,
-/*0EC0*/0x12, 0x07, 0x7B, 0x12, 0x08, 0x81, 0x12, 0x07,
- 0x72, 0x12, 0x08, 0x35, 0xE0, 0x90, 0x07, 0x24,
-/*0ED0*/0x12, 0x07, 0x78, 0xEF, 0x64, 0x04, 0x4E, 0x70,
- 0x29, 0x12, 0x07, 0xE4, 0xE0, 0xFD, 0x90, 0x07,
-/*0EE0*/0x26, 0x12, 0x07, 0x7B, 0x12, 0x07, 0xF0, 0xE0,
- 0xFD, 0x90, 0x07, 0x28, 0x12, 0x07, 0x7B, 0x12,
-/*0EF0*/0x08, 0x8B, 0x12, 0x07, 0x72, 0x12, 0x08, 0x41,
- 0xE0, 0x54, 0x1F, 0xFD, 0x90, 0x07, 0x24, 0x12,
-/*0F00*/0x07, 0x7B, 0xEF, 0x64, 0x01, 0x4E, 0x70, 0x04,
- 0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00, 0xEF, 0x64,
-/*0F10*/0x02, 0x4E, 0x70, 0x04, 0x7F, 0x01, 0x80, 0x02,
- 0x7F, 0x00, 0xEF, 0x4D, 0x60, 0x35, 0x12, 0x07,
-/*0F20*/0xFC, 0xE0, 0xFF, 0x90, 0x07, 0x26, 0x12, 0x07,
- 0x89, 0xEF, 0xF0, 0x12, 0x08, 0x08, 0xE0, 0xFF,
-/*0F30*/0x90, 0x07, 0x28, 0x12, 0x07, 0x89, 0xEF, 0xF0,
- 0x12, 0x08, 0x4D, 0xE0, 0x54, 0x1F, 0xFF, 0x12,
-/*0F40*/0x07, 0x86, 0xEF, 0xF0, 0x12, 0x08, 0x59, 0xE0,
- 0x54, 0x1F, 0xFF, 0x90, 0x07, 0x24, 0x12, 0x07,
-/*0F50*/0x89, 0xEF, 0xF0, 0x22, 0xE4, 0xF5, 0x53, 0x12,
- 0x0E, 0x81, 0x40, 0x04, 0x7F, 0x01, 0x80, 0x02,
-/*0F60*/0x7F, 0x00, 0x12, 0x0E, 0x89, 0x40, 0x04, 0x7E,
- 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F, 0x70,
-/*0F70*/0x03, 0x02, 0x0F, 0xF6, 0x85, 0xE1, 0x10, 0x43,
- 0xE1, 0x02, 0x53, 0xE1, 0x0F, 0x85, 0xE1, 0x10,
-/*0F80*/0xE4, 0xF5, 0x51, 0xE5, 0xE3, 0x54, 0x3F, 0xF5,
- 0x52, 0x12, 0x0E, 0x89, 0x40, 0x1D, 0xAD, 0x52,
-/*0F90*/0xAF, 0x51, 0x12, 0x11, 0x18, 0xEF, 0x60, 0x08,
- 0x85, 0xE1, 0x10, 0x43, 0xE1, 0x40, 0x80, 0x0B,
-/*0FA0*/0x53, 0xE1, 0xBF, 0x12, 0x0E, 0x58, 0x12, 0x00,
- 0x06, 0x80, 0xFB, 0xE5, 0xE3, 0x54, 0x3F, 0xF5,
-/*0FB0*/0x51, 0xE5, 0xE4, 0x54, 0x3F, 0xF5, 0x52, 0x12,
- 0x0E, 0x81, 0x40, 0x1D, 0xAD, 0x52, 0xAF, 0x51,
-/*0FC0*/0x12, 0x11, 0x18, 0xEF, 0x60, 0x08, 0x85, 0xE1,
- 0x10, 0x43, 0xE1, 0x20, 0x80, 0x0B, 0x53, 0xE1,
-/*0FD0*/0xDF, 0x12, 0x0E, 0x58, 0x12, 0x00, 0x06, 0x80,
- 0xFB, 0x12, 0x0E, 0x81, 0x40, 0x04, 0x7F, 0x01,
-/*0FE0*/0x80, 0x02, 0x7F, 0x00, 0x12, 0x0E, 0x89, 0x40,
- 0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE,
-/*0FF0*/0x4F, 0x60, 0x03, 0x12, 0x0E, 0x5B, 0x22, 0x12,
- 0x0E, 0x21, 0xEF, 0xF0, 0x12, 0x10, 0x91, 0x22,
-/*1000*/0x02, 0x11, 0x00, 0x02, 0x10, 0x40, 0x02, 0x10,
- 0x90, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1010*/0x01, 0x20, 0x01, 0x20, 0xE4, 0xF5, 0x57, 0x12,
- 0x16, 0xBD, 0x12, 0x16, 0x44, 0xE4, 0x12, 0x10,
-/*1020*/0x56, 0x12, 0x14, 0xB7, 0x90, 0x07, 0x26, 0x12,
- 0x07, 0x35, 0xE4, 0x12, 0x07, 0x31, 0xE4, 0xF0,
-/*1030*/0x12, 0x10, 0x56, 0x12, 0x14, 0xB7, 0x90, 0x07,
- 0x26, 0x12, 0x07, 0x35, 0xE5, 0x41, 0x12, 0x07,
-/*1040*/0x31, 0xE5, 0x40, 0xF0, 0xAF, 0x57, 0x7E, 0x00,
- 0xAD, 0x56, 0x7C, 0x00, 0x12, 0x04, 0x44, 0xAF,
-/*1050*/0x56, 0x7E, 0x00, 0x02, 0x11, 0xEE, 0xFF, 0x90,
- 0x07, 0x20, 0xA3, 0xE0, 0xFD, 0xE4, 0xF5, 0x56,
-/*1060*/0xF5, 0x40, 0xFE, 0xFC, 0xAB, 0x56, 0xFA, 0x12,
- 0x11, 0x51, 0x7F, 0x0F, 0x7D, 0x18, 0xE4, 0xF5,
-/*1070*/0x56, 0xF5, 0x40, 0xFE, 0xFC, 0xAB, 0x56, 0xFA,
- 0x12, 0x15, 0x41, 0xAF, 0x56, 0x7E, 0x00, 0x12,
-/*1080*/0x1A, 0xFF, 0xE4, 0xFF, 0xF5, 0x56, 0x7D, 0x1F,
- 0xF5, 0x40, 0xFE, 0xFC, 0xAB, 0x56, 0xFA, 0x22,
-/*1090*/0x22, 0xE4, 0xF5, 0x55, 0xE5, 0x08, 0xFD, 0x74,
- 0xA0, 0xF5, 0x56, 0xED, 0x44, 0x07, 0xF5, 0x57,
-/*10A0*/0xE5, 0x28, 0x30, 0xE5, 0x03, 0xD3, 0x80, 0x01,
- 0xC3, 0x40, 0x05, 0x7F, 0x28, 0xEF, 0x80, 0x04,
-/*10B0*/0x7F, 0x14, 0xEF, 0xC3, 0x13, 0xF5, 0x54, 0xE4,
- 0xF9, 0x12, 0x0E, 0x18, 0x75, 0x83, 0x8E, 0xE0,
-/*10C0*/0xF5, 0x10, 0xCE, 0xEF, 0xCE, 0xEE, 0xD3, 0x94,
- 0x00, 0x40, 0x26, 0xE5, 0x10, 0x54, 0xFE, 0x12,
-/*10D0*/0x0E, 0x98, 0x75, 0x83, 0x8E, 0xED, 0xF0, 0xE5,
- 0x10, 0x44, 0x01, 0xFD, 0xEB, 0x44, 0x07, 0xF5,
-/*10E0*/0x82, 0xED, 0xF0, 0x85, 0x57, 0x82, 0x85, 0x56,
- 0x83, 0xE0, 0x30, 0xE3, 0x01, 0x09, 0x1E, 0x80,
-/*10F0*/0xD4, 0xC2, 0x34, 0xE9, 0xC3, 0x95, 0x54, 0x40,
- 0x02, 0xD2, 0x34, 0x22, 0x02, 0x00, 0x06, 0x22,
-/*1100*/0x30, 0x30, 0x11, 0x90, 0x10, 0x00, 0xE4, 0x93,
- 0xF5, 0x10, 0x90, 0x10, 0x10, 0xE4, 0x93, 0xF5,
-/*1110*/0x10, 0x12, 0x10, 0x90, 0x12, 0x11, 0x50, 0x22,
- 0xE4, 0xFC, 0xC3, 0xED, 0x9F, 0xFA, 0xEF, 0xF5,
-/*1120*/0x83, 0x75, 0x82, 0x00, 0x79, 0xFF, 0xE4, 0x93,
- 0xCC, 0x6C, 0xCC, 0xA3, 0xD9, 0xF8, 0xDA, 0xF6,
-/*1130*/0xE5, 0xE2, 0x30, 0xE4, 0x02, 0x8C, 0xE5, 0xED,
- 0x24, 0xFF, 0xFF, 0xEF, 0x75, 0x82, 0xFF, 0xF5,
-/*1140*/0x83, 0xE4, 0x93, 0x6C, 0x70, 0x03, 0x7F, 0x01,
- 0x22, 0x7F, 0x00, 0x22, 0x22, 0x11, 0x00, 0x00,
-/*1150*/0x22, 0x8E, 0x58, 0x8F, 0x59, 0x8C, 0x5A, 0x8D,
- 0x5B, 0x8A, 0x5C, 0x8B, 0x5D, 0x75, 0x5E, 0x01,
-/*1160*/0xE4, 0xF5, 0x5F, 0xF5, 0x60, 0xF5, 0x62, 0x12,
- 0x07, 0x2A, 0x75, 0x83, 0xD0, 0xE0, 0xFF, 0xC4,
-/*1170*/0x54, 0x0F, 0xF5, 0x61, 0x12, 0x1E, 0xA5, 0x85,
- 0x59, 0x5E, 0xD3, 0xE5, 0x5E, 0x95, 0x5B, 0xE5,
-/*1180*/0x5A, 0x12, 0x07, 0x6B, 0x50, 0x4B, 0x12, 0x07,
- 0x03, 0x75, 0x83, 0xBC, 0xE0, 0x45, 0x5E, 0x12,
-/*1190*/0x07, 0x29, 0x75, 0x83, 0xBE, 0xE0, 0x45, 0x5E,
- 0x12, 0x07, 0x29, 0x75, 0x83, 0xC0, 0xE0, 0x45,
-/*11A0*/0x5E, 0xF0, 0xAF, 0x5F, 0xE5, 0x60, 0x12, 0x08,
- 0x78, 0x12, 0x0A, 0xFF, 0xAF, 0x62, 0x7E, 0x00,
-/*11B0*/0xAD, 0x5D, 0xAC, 0x5C, 0x12, 0x04, 0x44, 0xE5,
- 0x61, 0xAF, 0x5E, 0x7E, 0x00, 0xB4, 0x03, 0x05,
-/*11C0*/0x12, 0x1E, 0x21, 0x80, 0x07, 0xAD, 0x5D, 0xAC,
- 0x5C, 0x12, 0x13, 0x17, 0x05, 0x5E, 0x02, 0x11,
-/*11D0*/0x7A, 0x12, 0x07, 0x03, 0x75, 0x83, 0xBC, 0xE0,
- 0x45, 0x40, 0x12, 0x07, 0x29, 0x75, 0x83, 0xBE,
-/*11E0*/0xE0, 0x45, 0x40, 0x12, 0x07, 0x29, 0x75, 0x83,
- 0xC0, 0xE0, 0x45, 0x40, 0xF0, 0x22, 0x8E, 0x58,
-/*11F0*/0x8F, 0x59, 0x75, 0x5A, 0x01, 0x79, 0x01, 0x75,
- 0x5B, 0x01, 0xE4, 0xFB, 0x12, 0x07, 0x2A, 0x75,
-/*1200*/0x83, 0xAE, 0xE0, 0x54, 0x1A, 0xFF, 0x12, 0x08,
- 0x65, 0xE0, 0xC4, 0x13, 0x54, 0x07, 0xFE, 0xEF,
-/*1210*/0x70, 0x0C, 0xEE, 0x65, 0x35, 0x70, 0x07, 0x90,
- 0x07, 0x2F, 0xE0, 0xB4, 0x01, 0x0D, 0xAF, 0x35,
-/*1220*/0x7E, 0x00, 0x12, 0x0E, 0xA9, 0xCF, 0xEB, 0xCF,
- 0x02, 0x1E, 0x60, 0xE5, 0x59, 0x64, 0x02, 0x45,
-/*1230*/0x58, 0x70, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F,
- 0x00, 0xE5, 0x59, 0x45, 0x58, 0x70, 0x04, 0x7E,
-/*1240*/0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F, 0x60,
- 0x23, 0x85, 0x41, 0x49, 0x85, 0x40, 0x4B, 0xE5,
-/*1250*/0x59, 0x45, 0x58, 0x70, 0x2C, 0xAF, 0x5A, 0xFE,
- 0xCD, 0xE9, 0xCD, 0xFC, 0xAB, 0x59, 0xAA, 0x58,
-/*1260*/0x12, 0x0A, 0xFF, 0xAF, 0x5B, 0x7E, 0x00, 0x12,
- 0x1E, 0x60, 0x80, 0x15, 0xAF, 0x5B, 0x7E, 0x00,
-/*1270*/0x12, 0x1E, 0x60, 0x90, 0x07, 0x26, 0x12, 0x07,
- 0x35, 0xE5, 0x49, 0x12, 0x07, 0x31, 0xE5, 0x4B,
-/*1280*/0xF0, 0xE4, 0xFD, 0xAF, 0x35, 0xFE, 0xFC, 0x12,
- 0x09, 0x15, 0x22, 0x8C, 0x64, 0x8D, 0x65, 0x12,
-/*1290*/0x08, 0xDA, 0x40, 0x3C, 0xE5, 0x65, 0x45, 0x64,
- 0x70, 0x10, 0x12, 0x09, 0x04, 0xC3, 0xE5, 0x3E,
-/*12A0*/0x12, 0x07, 0x69, 0x40, 0x3B, 0x12, 0x08, 0x95,
- 0x80, 0x18, 0xE5, 0x3E, 0xC3, 0x95, 0x38, 0x40,
-/*12B0*/0x1D, 0x85, 0x3E, 0x38, 0xE5, 0x3E, 0x60, 0x05,
- 0x85, 0x3F, 0x39, 0x80, 0x03, 0x85, 0x39, 0x39,
-/*12C0*/0x8F, 0x3A, 0x12, 0x07, 0xA8, 0xE5, 0x3E, 0x12,
- 0x07, 0x53, 0xE5, 0x3F, 0xF0, 0x22, 0x80, 0x3B,
-/*12D0*/0xE5, 0x65, 0x45, 0x64, 0x70, 0x11, 0x12, 0x07,
- 0x5F, 0x40, 0x05, 0x12, 0x08, 0x9E, 0x80, 0x1F,
-/*12E0*/0x12, 0x07, 0x3E, 0xE5, 0x41, 0xF0, 0x22, 0xE5,
- 0x3C, 0xC3, 0x95, 0x38, 0x40, 0x1D, 0x85, 0x3C,
-/*12F0*/0x38, 0xE5, 0x3C, 0x60, 0x05, 0x85, 0x3D, 0x39,
- 0x80, 0x03, 0x85, 0x39, 0x39, 0x8F, 0x3A, 0x12,
-/*1300*/0x07, 0xA8, 0xE5, 0x3C, 0x12, 0x07, 0x53, 0xE5,
- 0x3D, 0xF0, 0x22, 0x12, 0x07, 0x9F, 0xE5, 0x38,
-/*1310*/0x12, 0x07, 0x53, 0xE5, 0x39, 0xF0, 0x22, 0x8C,
- 0x63, 0x8D, 0x64, 0x12, 0x08, 0xDA, 0x40, 0x3C,
-/*1320*/0xE5, 0x64, 0x45, 0x63, 0x70, 0x10, 0x12, 0x09,
- 0x04, 0xC3, 0xE5, 0x3E, 0x12, 0x07, 0x69, 0x40,
-/*1330*/0x3B, 0x12, 0x08, 0x95, 0x80, 0x18, 0xE5, 0x3E,
- 0xC3, 0x95, 0x38, 0x40, 0x1D, 0x85, 0x3E, 0x38,
-/*1340*/0xE5, 0x3E, 0x60, 0x05, 0x85, 0x3F, 0x39, 0x80,
- 0x03, 0x85, 0x39, 0x39, 0x8F, 0x3A, 0x12, 0x07,
-/*1350*/0xA8, 0xE5, 0x3E, 0x12, 0x07, 0x53, 0xE5, 0x3F,
- 0xF0, 0x22, 0x80, 0x3B, 0xE5, 0x64, 0x45, 0x63,
-/*1360*/0x70, 0x11, 0x12, 0x07, 0x5F, 0x40, 0x05, 0x12,
- 0x08, 0x9E, 0x80, 0x1F, 0x12, 0x07, 0x3E, 0xE5,
-/*1370*/0x41, 0xF0, 0x22, 0xE5, 0x3C, 0xC3, 0x95, 0x38,
- 0x40, 0x1D, 0x85, 0x3C, 0x38, 0xE5, 0x3C, 0x60,
-/*1380*/0x05, 0x85, 0x3D, 0x39, 0x80, 0x03, 0x85, 0x39,
- 0x39, 0x8F, 0x3A, 0x12, 0x07, 0xA8, 0xE5, 0x3C,
-/*1390*/0x12, 0x07, 0x53, 0xE5, 0x3D, 0xF0, 0x22, 0x12,
- 0x07, 0x9F, 0xE5, 0x38, 0x12, 0x07, 0x53, 0xE5,
-/*13A0*/0x39, 0xF0, 0x22, 0xE5, 0x0D, 0xFE, 0xE5, 0x08,
- 0x8E, 0x54, 0x44, 0x05, 0xF5, 0x55, 0x75, 0x15,
-/*13B0*/0x0F, 0xF5, 0x82, 0x12, 0x0E, 0x7A, 0x12, 0x17,
- 0xA3, 0x20, 0x31, 0x05, 0x75, 0x15, 0x03, 0x80,
-/*13C0*/0x03, 0x75, 0x15, 0x0B, 0xE5, 0x0A, 0xC3, 0x94,
- 0x01, 0x50, 0x38, 0x12, 0x14, 0x20, 0x20, 0x31,
-/*13D0*/0x06, 0x05, 0x15, 0x05, 0x15, 0x80, 0x04, 0x15,
- 0x15, 0x15, 0x15, 0xE5, 0x0A, 0xC3, 0x94, 0x01,
-/*13E0*/0x50, 0x21, 0x12, 0x14, 0x20, 0x20, 0x31, 0x04,
- 0x05, 0x15, 0x80, 0x02, 0x15, 0x15, 0xE5, 0x0A,
-/*13F0*/0xC3, 0x94, 0x01, 0x50, 0x0E, 0x12, 0x0E, 0x77,
- 0x12, 0x17, 0xA3, 0x20, 0x31, 0x05, 0x05, 0x15,
-/*1400*/0x12, 0x0E, 0x77, 0xE5, 0x15, 0xB4, 0x08, 0x04,
- 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x15,
-/*1410*/0xB4, 0x07, 0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E,
- 0x00, 0xEE, 0x4F, 0x60, 0x02, 0x05, 0x7F, 0x22,
-/*1420*/0x85, 0x55, 0x82, 0x85, 0x54, 0x83, 0xE5, 0x15,
- 0xF0, 0x12, 0x17, 0xA3, 0x22, 0x12, 0x07, 0x2A,
-/*1430*/0x75, 0x83, 0xAE, 0x74, 0xFF, 0x12, 0x07, 0x29,
- 0xE0, 0x54, 0x1A, 0xF5, 0x34, 0xE0, 0xC4, 0x13,
-/*1440*/0x54, 0x07, 0xF5, 0x35, 0x24, 0xFE, 0x60, 0x24,
- 0x24, 0xFE, 0x60, 0x3C, 0x24, 0x04, 0x70, 0x63,
-/*1450*/0x75, 0x31, 0x2D, 0xE5, 0x08, 0xFD, 0x74, 0xB6,
- 0x12, 0x07, 0x92, 0x74, 0xBC, 0x90, 0x07, 0x22,
-/*1460*/0x12, 0x07, 0x95, 0x74, 0x90, 0x12, 0x07, 0xB3,
- 0x74, 0x92, 0x80, 0x3C, 0x75, 0x31, 0x3A, 0xE5,
-/*1470*/0x08, 0xFD, 0x74, 0xBA, 0x12, 0x07, 0x92, 0x74,
- 0xC0, 0x90, 0x07, 0x22, 0x12, 0x07, 0xB6, 0x74,
-/*1480*/0xC4, 0x12, 0x07, 0xB3, 0x74, 0xC8, 0x80, 0x20,
- 0x75, 0x31, 0x35, 0xE5, 0x08, 0xFD, 0x74, 0xB8,
-/*1490*/0x12, 0x07, 0x92, 0x74, 0xBE, 0xFF, 0xED, 0x44,
- 0x07, 0x90, 0x07, 0x22, 0xCF, 0xF0, 0xA3, 0xEF,
-/*14A0*/0xF0, 0x74, 0xC2, 0x12, 0x07, 0xB3, 0x74, 0xC6,
- 0xFF, 0xED, 0x44, 0x07, 0xA3, 0xCF, 0xF0, 0xA3,
-/*14B0*/0xEF, 0xF0, 0x22, 0x75, 0x34, 0x01, 0x22, 0x8E,
- 0x58, 0x8F, 0x59, 0x8C, 0x5A, 0x8D, 0x5B, 0x8A,
-/*14C0*/0x5C, 0x8B, 0x5D, 0x75, 0x5E, 0x01, 0xE4, 0xF5,
- 0x5F, 0x12, 0x1E, 0xA5, 0x85, 0x59, 0x5E, 0xD3,
-/*14D0*/0xE5, 0x5E, 0x95, 0x5B, 0xE5, 0x5A, 0x12, 0x07,
- 0x6B, 0x50, 0x57, 0xE5, 0x5D, 0x45, 0x5C, 0x70,
-/*14E0*/0x30, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x92, 0xE5,
- 0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC6, 0xE5,
-/*14F0*/0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC8, 0xE5,
- 0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0x90, 0xE5,
-/*1500*/0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2, 0xE5,
- 0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0x80,
-/*1510*/0x03, 0x12, 0x07, 0x32, 0xE5, 0x5E, 0xF0, 0xAF,
- 0x5F, 0x7E, 0x00, 0xAD, 0x5D, 0xAC, 0x5C, 0x12,
-/*1520*/0x04, 0x44, 0xAF, 0x5E, 0x7E, 0x00, 0xAD, 0x5D,
- 0xAC, 0x5C, 0x12, 0x0B, 0xD1, 0x05, 0x5E, 0x02,
-/*1530*/0x14, 0xCF, 0xAB, 0x5D, 0xAA, 0x5C, 0xAD, 0x5B,
- 0xAC, 0x5A, 0xAF, 0x59, 0xAE, 0x58, 0x02, 0x1B,
-/*1540*/0xFB, 0x8C, 0x5C, 0x8D, 0x5D, 0x8A, 0x5E, 0x8B,
- 0x5F, 0x75, 0x60, 0x01, 0xE4, 0xF5, 0x61, 0xF5,
-/*1550*/0x62, 0xF5, 0x63, 0x12, 0x1E, 0xA5, 0x8F, 0x60,
- 0xD3, 0xE5, 0x60, 0x95, 0x5D, 0xE5, 0x5C, 0x12,
-/*1560*/0x07, 0x6B, 0x50, 0x61, 0xE5, 0x5F, 0x45, 0x5E,
- 0x70, 0x27, 0x12, 0x07, 0x2A, 0x75, 0x83, 0xB6,
-/*1570*/0xE5, 0x60, 0x12, 0x07, 0x29, 0x75, 0x83, 0xB8,
- 0xE5, 0x60, 0x12, 0x07, 0x29, 0x75, 0x83, 0xBA,
-/*1580*/0xE5, 0x60, 0xF0, 0xAF, 0x61, 0x7E, 0x00, 0xE5,
- 0x62, 0x12, 0x08, 0x7A, 0x12, 0x0A, 0xFF, 0x80,
-/*1590*/0x19, 0x90, 0x07, 0x24, 0x12, 0x07, 0x35, 0xE5,
- 0x60, 0x12, 0x07, 0x29, 0x75, 0x83, 0x8E, 0xE4,
-/*15A0*/0x12, 0x07, 0x29, 0x74, 0x01, 0x12, 0x07, 0x29,
- 0xE4, 0xF0, 0xAF, 0x63, 0x7E, 0x00, 0xAD, 0x5F,
-/*15B0*/0xAC, 0x5E, 0x12, 0x04, 0x44, 0xAF, 0x60, 0x7E,
- 0x00, 0xAD, 0x5F, 0xAC, 0x5E, 0x12, 0x12, 0x8B,
-/*15C0*/0x05, 0x60, 0x02, 0x15, 0x58, 0x22, 0x90, 0x11,
- 0x4D, 0xE4, 0x93, 0x90, 0x07, 0x2E, 0xF0, 0x12,
-/*15D0*/0x08, 0x1F, 0x75, 0x83, 0xAE, 0xE0, 0x54, 0x1A,
- 0xF5, 0x34, 0x70, 0x67, 0xEF, 0x44, 0x07, 0xF5,
-/*15E0*/0x82, 0x75, 0x83, 0xCE, 0xE0, 0xFF, 0x13, 0x13,
- 0x13, 0x54, 0x07, 0xF5, 0x36, 0x54, 0x0F, 0xD3,
-/*15F0*/0x94, 0x00, 0x40, 0x06, 0x12, 0x14, 0x2D, 0x12,
- 0x1B, 0xA9, 0xE5, 0x36, 0x54, 0x0F, 0x24, 0xFE,
-/*1600*/0x60, 0x0C, 0x14, 0x60, 0x0C, 0x14, 0x60, 0x19,
- 0x24, 0x03, 0x70, 0x37, 0x80, 0x10, 0x02, 0x1E,
-/*1610*/0x91, 0x12, 0x1E, 0x91, 0x12, 0x07, 0x2A, 0x75,
- 0x83, 0xCE, 0xE0, 0x54, 0xEF, 0xF0, 0x02, 0x1D,
-/*1620*/0xAE, 0x12, 0x10, 0x14, 0xE4, 0xF5, 0x55, 0x12,
- 0x1D, 0x85, 0x05, 0x55, 0xE5, 0x55, 0xC3, 0x94,
-/*1630*/0x05, 0x40, 0xF4, 0x12, 0x07, 0x2A, 0x75, 0x83,
- 0xCE, 0xE0, 0x54, 0xC7, 0x12, 0x07, 0x29, 0xE0,
-/*1640*/0x44, 0x08, 0xF0, 0x22, 0xE4, 0xF5, 0x58, 0xF5,
- 0x59, 0xAF, 0x08, 0xEF, 0x44, 0x07, 0xF5, 0x82,
-/*1650*/0x75, 0x83, 0xD0, 0xE0, 0xFD, 0xC4, 0x54, 0x0F,
- 0xF5, 0x5A, 0xEF, 0x44, 0x07, 0xF5, 0x82, 0x75,
-/*1660*/0x83, 0x80, 0x74, 0x01, 0xF0, 0x12, 0x08, 0x21,
- 0x75, 0x83, 0x82, 0xE5, 0x45, 0xF0, 0xEF, 0x44,
-/*1670*/0x07, 0xF5, 0x82, 0x75, 0x83, 0x8A, 0x74, 0xFF,
- 0xF0, 0x12, 0x1A, 0x4D, 0x12, 0x07, 0x2A, 0x75,
-/*1680*/0x83, 0xBC, 0xE0, 0x54, 0xEF, 0x12, 0x07, 0x29,
- 0x75, 0x83, 0xBE, 0xE0, 0x54, 0xEF, 0x12, 0x07,
-/*1690*/0x29, 0x75, 0x83, 0xC0, 0xE0, 0x54, 0xEF, 0x12,
- 0x07, 0x29, 0x75, 0x83, 0xBC, 0xE0, 0x44, 0x10,
-/*16A0*/0x12, 0x07, 0x29, 0x75, 0x83, 0xBE, 0xE0, 0x44,
- 0x10, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC0, 0xE0,
-/*16B0*/0x44, 0x10, 0xF0, 0xAF, 0x58, 0xE5, 0x59, 0x12,
- 0x08, 0x78, 0x02, 0x0A, 0xFF, 0xE4, 0xF5, 0x58,
-/*16C0*/0x7D, 0x01, 0xF5, 0x59, 0xAF, 0x35, 0xFE, 0xFC,
- 0x12, 0x09, 0x15, 0x12, 0x07, 0x2A, 0x75, 0x83,
-/*16D0*/0xB6, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
- 0xB8, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
-/*16E0*/0xBA, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
- 0xBC, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
-/*16F0*/0xBE, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
- 0xC0, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
-/*1700*/0x90, 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2,
- 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0xE4,
-/*1710*/0x12, 0x07, 0x29, 0x75, 0x83, 0x92, 0xE4, 0x12,
- 0x07, 0x29, 0x75, 0x83, 0xC6, 0xE4, 0x12, 0x07,
-/*1720*/0x29, 0x75, 0x83, 0xC8, 0xE4, 0xF0, 0xAF, 0x58,
- 0xFE, 0xE5, 0x59, 0x12, 0x08, 0x7A, 0x02, 0x0A,
-/*1730*/0xFF, 0xE5, 0xE2, 0x30, 0xE4, 0x6C, 0xE5, 0xE7,
- 0x54, 0xC0, 0x64, 0x40, 0x70, 0x64, 0xE5, 0x09,
-/*1740*/0xC4, 0x54, 0x30, 0xFE, 0xE5, 0x08, 0x25, 0xE0,
- 0x25, 0xE0, 0x54, 0xC0, 0x4E, 0xFE, 0xEF, 0x54,
-/*1750*/0x3F, 0x4E, 0xFD, 0xE5, 0x2B, 0xAE, 0x2A, 0x78,
- 0x02, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9,
-/*1760*/0xF5, 0x82, 0x8E, 0x83, 0xED, 0xF0, 0xE5, 0x2B,
- 0xAE, 0x2A, 0x78, 0x02, 0xC3, 0x33, 0xCE, 0x33,
-/*1770*/0xCE, 0xD8, 0xF9, 0xFF, 0xF5, 0x82, 0x8E, 0x83,
- 0xA3, 0xE5, 0xFE, 0xF0, 0x8F, 0x82, 0x8E, 0x83,
-/*1780*/0xA3, 0xA3, 0xE5, 0xFD, 0xF0, 0x8F, 0x82, 0x8E,
- 0x83, 0xA3, 0xA3, 0xA3, 0xE5, 0xFC, 0xF0, 0xC3,
-/*1790*/0xE5, 0x2B, 0x94, 0xFA, 0xE5, 0x2A, 0x94, 0x00,
- 0x50, 0x08, 0x05, 0x2B, 0xE5, 0x2B, 0x70, 0x02,
-/*17A0*/0x05, 0x2A, 0x22, 0xE4, 0xFF, 0xE4, 0xF5, 0x58,
- 0xF5, 0x56, 0xF5, 0x57, 0x74, 0x82, 0xFC, 0x12,
-/*17B0*/0x0E, 0x04, 0x8C, 0x83, 0xE0, 0xF5, 0x10, 0x54,
- 0x7F, 0xF0, 0xE5, 0x10, 0x44, 0x80, 0x12, 0x0E,
-/*17C0*/0x98, 0xED, 0xF0, 0x7E, 0x0A, 0x12, 0x0E, 0x04,
- 0x75, 0x83, 0xA0, 0xE0, 0x20, 0xE0, 0x26, 0xDE,
-/*17D0*/0xF4, 0x05, 0x57, 0xE5, 0x57, 0x70, 0x02, 0x05,
- 0x56, 0xE5, 0x14, 0x24, 0x01, 0xFD, 0xE4, 0x33,
-/*17E0*/0xFC, 0xD3, 0xE5, 0x57, 0x9D, 0xE5, 0x56, 0x9C,
- 0x40, 0xD9, 0xE5, 0x0A, 0x94, 0x20, 0x50, 0x02,
-/*17F0*/0x05, 0x0A, 0x43, 0xE1, 0x08, 0xC2, 0x31, 0x12,
- 0x0E, 0x04, 0x75, 0x83, 0xA6, 0xE0, 0x55, 0x12,
-/*1800*/0x65, 0x12, 0x70, 0x03, 0xD2, 0x31, 0x22, 0xC2,
- 0x31, 0x22, 0x90, 0x07, 0x26, 0xE0, 0xFA, 0xA3,
-/*1810*/0xE0, 0xF5, 0x82, 0x8A, 0x83, 0xE0, 0xF5, 0x41,
- 0xE5, 0x39, 0xC3, 0x95, 0x41, 0x40, 0x26, 0xE5,
-/*1820*/0x39, 0x95, 0x41, 0xC3, 0x9F, 0xEE, 0x12, 0x07,
- 0x6B, 0x40, 0x04, 0x7C, 0x01, 0x80, 0x02, 0x7C,
-/*1830*/0x00, 0xE5, 0x41, 0x64, 0x3F, 0x60, 0x04, 0x7B,
- 0x01, 0x80, 0x02, 0x7B, 0x00, 0xEC, 0x5B, 0x60,
-/*1840*/0x29, 0x05, 0x41, 0x80, 0x28, 0xC3, 0xE5, 0x41,
- 0x95, 0x39, 0xC3, 0x9F, 0xEE, 0x12, 0x07, 0x6B,
-/*1850*/0x40, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00,
- 0xE5, 0x41, 0x60, 0x04, 0x7E, 0x01, 0x80, 0x02,
-/*1860*/0x7E, 0x00, 0xEF, 0x5E, 0x60, 0x04, 0x15, 0x41,
- 0x80, 0x03, 0x85, 0x39, 0x41, 0x85, 0x3A, 0x40,
-/*1870*/0x22, 0xE5, 0xE2, 0x30, 0xE4, 0x60, 0xE5, 0xE1,
- 0x30, 0xE2, 0x5B, 0xE5, 0x09, 0x70, 0x04, 0x7F,
-/*1880*/0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x08, 0x70,
- 0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE,
-/*1890*/0x5F, 0x60, 0x43, 0x53, 0xF9, 0xF8, 0xE5, 0xE2,
- 0x30, 0xE4, 0x3B, 0xE5, 0xE1, 0x30, 0xE2, 0x2E,
-/*18A0*/0x43, 0xFA, 0x02, 0x53, 0xFA, 0xFB, 0xE4, 0xF5,
- 0x10, 0x90, 0x94, 0x70, 0xE5, 0x10, 0xF0, 0xE5,
-/*18B0*/0xE1, 0x30, 0xE2, 0xE7, 0x90, 0x94, 0x70, 0xE0,
- 0x65, 0x10, 0x60, 0x03, 0x43, 0xFA, 0x04, 0x05,
-/*18C0*/0x10, 0x90, 0x94, 0x70, 0xE5, 0x10, 0xF0, 0x70,
- 0xE6, 0x12, 0x00, 0x06, 0x80, 0xE1, 0x53, 0xFA,
-/*18D0*/0xFD, 0x53, 0xFA, 0xFB, 0x80, 0xC0, 0x22, 0x8F,
- 0x54, 0x12, 0x00, 0x06, 0xE5, 0xE1, 0x30, 0xE0,
-/*18E0*/0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5,
- 0x7E, 0xD3, 0x94, 0x05, 0x40, 0x04, 0x7E, 0x01,
-/*18F0*/0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F, 0x60, 0x3D,
- 0x85, 0x54, 0x11, 0xE5, 0xE2, 0x20, 0xE1, 0x32,
-/*1900*/0x74, 0xCE, 0x12, 0x1A, 0x05, 0x30, 0xE7, 0x04,
- 0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00, 0x8F, 0x82,
-/*1910*/0x8E, 0x83, 0xE0, 0x30, 0xE6, 0x04, 0x7F, 0x01,
- 0x80, 0x02, 0x7F, 0x00, 0xEF, 0x5D, 0x70, 0x15,
-/*1920*/0x12, 0x15, 0xC6, 0x74, 0xCE, 0x12, 0x1A, 0x05,
- 0x30, 0xE6, 0x07, 0xE0, 0x44, 0x80, 0xF0, 0x43,
-/*1930*/0xF9, 0x80, 0x12, 0x18, 0x71, 0x22, 0x12, 0x0E,
- 0x44, 0xE5, 0x16, 0x25, 0xE0, 0x25, 0xE0, 0x24,
-/*1940*/0xB0, 0xF5, 0x82, 0xE4, 0x34, 0x1A, 0xF5, 0x83,
- 0xE4, 0x93, 0xF5, 0x0F, 0xE5, 0x16, 0x25, 0xE0,
-/*1950*/0x25, 0xE0, 0x24, 0xB1, 0xF5, 0x82, 0xE4, 0x34,
- 0x1A, 0xF5, 0x83, 0xE4, 0x93, 0xF5, 0x0E, 0x12,
-/*1960*/0x0E, 0x65, 0xF5, 0x10, 0xE5, 0x0F, 0x54, 0xF0,
- 0x12, 0x0E, 0x17, 0x75, 0x83, 0x8C, 0xEF, 0xF0,
-/*1970*/0xE5, 0x0F, 0x30, 0xE0, 0x0C, 0x12, 0x0E, 0x04,
- 0x75, 0x83, 0x86, 0xE0, 0x44, 0x40, 0xF0, 0x80,
-/*1980*/0x0A, 0x12, 0x0E, 0x04, 0x75, 0x83, 0x86, 0xE0,
- 0x54, 0xBF, 0xF0, 0x12, 0x0E, 0x91, 0x75, 0x83,
-/*1990*/0x82, 0xE5, 0x0E, 0xF0, 0x22, 0x7F, 0x05, 0x12,
- 0x17, 0x31, 0x12, 0x0E, 0x04, 0x12, 0x0E, 0x33,
-/*19A0*/0x74, 0x02, 0xF0, 0x74, 0x8E, 0xFE, 0x12, 0x0E,
- 0x04, 0x12, 0x0E, 0x0B, 0xEF, 0xF0, 0x75, 0x15,
-/*19B0*/0x70, 0x12, 0x0F, 0xF7, 0x20, 0x34, 0x05, 0x75,
- 0x15, 0x10, 0x80, 0x03, 0x75, 0x15, 0x50, 0x12,
-/*19C0*/0x0F, 0xF7, 0x20, 0x34, 0x04, 0x74, 0x10, 0x80,
- 0x02, 0x74, 0xF0, 0x25, 0x15, 0xF5, 0x15, 0x12,
-/*19D0*/0x0E, 0x21, 0xEF, 0xF0, 0x12, 0x10, 0x91, 0x20,
- 0x34, 0x17, 0xE5, 0x15, 0x64, 0x30, 0x60, 0x0C,
-/*19E0*/0x74, 0x10, 0x25, 0x15, 0xF5, 0x15, 0xB4, 0x80,
- 0x03, 0xE4, 0xF5, 0x15, 0x12, 0x0E, 0x21, 0xEF,
-/*19F0*/0xF0, 0x22, 0xF0, 0xE5, 0x0B, 0x25, 0xE0, 0x25,
- 0xE0, 0x24, 0x82, 0xF5, 0x82, 0xE4, 0x34, 0x07,
-/*1A00*/0xF5, 0x83, 0x22, 0x74, 0x88, 0xFE, 0xE5, 0x08,
- 0x44, 0x07, 0xFF, 0xF5, 0x82, 0x8E, 0x83, 0xE0,
-/*1A10*/0x22, 0xF0, 0xE5, 0x08, 0x44, 0x07, 0xF5, 0x82,
- 0x22, 0xF0, 0xE0, 0x54, 0xC0, 0x8F, 0x82, 0x8E,
-/*1A20*/0x83, 0xF0, 0x22, 0xEF, 0x44, 0x07, 0xF5, 0x82,
- 0x75, 0x83, 0x86, 0xE0, 0x54, 0x10, 0xD3, 0x94,
-/*1A30*/0x00, 0x22, 0xF0, 0x90, 0x07, 0x15, 0xE0, 0x04,
- 0xF0, 0x22, 0x44, 0x06, 0xF5, 0x82, 0x75, 0x83,
-/*1A40*/0x9E, 0xE0, 0x22, 0xFE, 0xEF, 0x44, 0x07, 0xF5,
- 0x82, 0x8E, 0x83, 0xE0, 0x22, 0xE4, 0x90, 0x07,
-/*1A50*/0x2A, 0xF0, 0xA3, 0xF0, 0x12, 0x07, 0x2A, 0x75,
- 0x83, 0x82, 0xE0, 0x54, 0x7F, 0x12, 0x07, 0x29,
-/*1A60*/0xE0, 0x44, 0x80, 0xF0, 0x12, 0x10, 0xFC, 0x12,
- 0x08, 0x1F, 0x75, 0x83, 0xA0, 0xE0, 0x20, 0xE0,
-/*1A70*/0x1A, 0x90, 0x07, 0x2B, 0xE0, 0x04, 0xF0, 0x70,
- 0x06, 0x90, 0x07, 0x2A, 0xE0, 0x04, 0xF0, 0x90,
-/*1A80*/0x07, 0x2A, 0xE0, 0xB4, 0x10, 0xE1, 0xA3, 0xE0,
- 0xB4, 0x00, 0xDC, 0xEE, 0x44, 0xA6, 0xFC, 0xEF,
-/*1A90*/0x44, 0x07, 0xF5, 0x82, 0x8C, 0x83, 0xE0, 0xF5,
- 0x32, 0xEE, 0x44, 0xA8, 0xFE, 0xEF, 0x44, 0x07,
-/*1AA0*/0xF5, 0x82, 0x8E, 0x83, 0xE0, 0xF5, 0x33, 0x22,
- 0x01, 0x20, 0x11, 0x00, 0x04, 0x20, 0x00, 0x90,
-/*1AB0*/0x00, 0x20, 0x0F, 0x92, 0x00, 0x21, 0x0F, 0x94,
- 0x00, 0x22, 0x0F, 0x96, 0x00, 0x23, 0x0F, 0x98,
-/*1AC0*/0x00, 0x24, 0x0F, 0x9A, 0x00, 0x25, 0x0F, 0x9C,
- 0x00, 0x26, 0x0F, 0x9E, 0x00, 0x27, 0x0F, 0xA0,
-/*1AD0*/0x01, 0x20, 0x01, 0xA2, 0x01, 0x21, 0x01, 0xA4,
- 0x01, 0x22, 0x01, 0xA6, 0x01, 0x23, 0x01, 0xA8,
-/*1AE0*/0x01, 0x24, 0x01, 0xAA, 0x01, 0x25, 0x01, 0xAC,
- 0x01, 0x26, 0x01, 0xAE, 0x01, 0x27, 0x01, 0xB0,
-/*1AF0*/0x01, 0x28, 0x01, 0xB4, 0x00, 0x28, 0x0F, 0xB6,
- 0x40, 0x28, 0x0F, 0xB8, 0x61, 0x28, 0x01, 0xCB,
-/*1B00*/0xEF, 0xCB, 0xCA, 0xEE, 0xCA, 0x7F, 0x01, 0xE4,
- 0xFD, 0xEB, 0x4A, 0x70, 0x24, 0xE5, 0x08, 0xF5,
-/*1B10*/0x82, 0x74, 0xB6, 0x12, 0x08, 0x29, 0xE5, 0x08,
- 0xF5, 0x82, 0x74, 0xB8, 0x12, 0x08, 0x29, 0xE5,
-/*1B20*/0x08, 0xF5, 0x82, 0x74, 0xBA, 0x12, 0x08, 0x29,
- 0x7E, 0x00, 0x7C, 0x00, 0x12, 0x0A, 0xFF, 0x80,
-/*1B30*/0x12, 0x90, 0x07, 0x26, 0x12, 0x07, 0x35, 0xE5,
- 0x41, 0xF0, 0x90, 0x07, 0x24, 0x12, 0x07, 0x35,
-/*1B40*/0xE5, 0x40, 0xF0, 0x12, 0x07, 0x2A, 0x75, 0x83,
- 0x8E, 0xE4, 0x12, 0x07, 0x29, 0x74, 0x01, 0x12,
-/*1B50*/0x07, 0x29, 0xE4, 0xF0, 0x22, 0xE4, 0xF5, 0x26,
- 0xF5, 0x27, 0x53, 0xE1, 0xFE, 0xF5, 0x2A, 0x75,
-/*1B60*/0x2B, 0x01, 0xF5, 0x08, 0x7F, 0x01, 0x12, 0x17,
- 0x31, 0x30, 0x30, 0x1C, 0x90, 0x1A, 0xA9, 0xE4,
-/*1B70*/0x93, 0xF5, 0x10, 0x90, 0x1F, 0xF9, 0xE4, 0x93,
- 0xF5, 0x10, 0x90, 0x00, 0x41, 0xE4, 0x93, 0xF5,
-/*1B80*/0x10, 0x90, 0x1E, 0xCA, 0xE4, 0x93, 0xF5, 0x10,
- 0x7F, 0x02, 0x12, 0x17, 0x31, 0x12, 0x0F, 0x54,
-/*1B90*/0x7F, 0x03, 0x12, 0x17, 0x31, 0x12, 0x00, 0x06,
- 0xE5, 0xE2, 0x30, 0xE7, 0x09, 0x12, 0x10, 0x00,
-/*1BA0*/0x30, 0x30, 0x03, 0x12, 0x11, 0x00, 0x02, 0x00,
- 0x47, 0x12, 0x08, 0x1F, 0x75, 0x83, 0xD0, 0xE0,
-/*1BB0*/0xC4, 0x54, 0x0F, 0xFD, 0x75, 0x43, 0x01, 0x75,
- 0x44, 0xFF, 0x12, 0x08, 0xAA, 0x74, 0x04, 0xF0,
-/*1BC0*/0x75, 0x3B, 0x01, 0xED, 0x14, 0x60, 0x0C, 0x14,
- 0x60, 0x0B, 0x14, 0x60, 0x0F, 0x24, 0x03, 0x70,
-/*1BD0*/0x0B, 0x80, 0x09, 0x80, 0x00, 0x12, 0x08, 0xA7,
- 0x04, 0xF0, 0x80, 0x06, 0x12, 0x08, 0xA7, 0x74,
-/*1BE0*/0x04, 0xF0, 0xEE, 0x44, 0x82, 0xFE, 0xEF, 0x44,
- 0x07, 0xF5, 0x82, 0x8E, 0x83, 0xE5, 0x45, 0x12,
-/*1BF0*/0x08, 0xBE, 0x75, 0x83, 0x82, 0xE5, 0x31, 0xF0,
- 0x02, 0x11, 0x4C, 0x8E, 0x60, 0x8F, 0x61, 0x12,
-/*1C00*/0x1E, 0xA5, 0xE4, 0xFF, 0xCE, 0xED, 0xCE, 0xEE,
- 0xD3, 0x95, 0x61, 0xE5, 0x60, 0x12, 0x07, 0x6B,
-/*1C10*/0x40, 0x39, 0x74, 0x20, 0x2E, 0xF5, 0x82, 0xE4,
- 0x34, 0x03, 0xF5, 0x83, 0xE0, 0x70, 0x03, 0xFF,
-/*1C20*/0x80, 0x26, 0x12, 0x08, 0xE2, 0xFD, 0xC3, 0x9F,
- 0x40, 0x1E, 0xCF, 0xED, 0xCF, 0xEB, 0x4A, 0x70,
-/*1C30*/0x0B, 0x8D, 0x42, 0x12, 0x08, 0xEE, 0xF5, 0x41,
- 0x8E, 0x40, 0x80, 0x0C, 0x12, 0x08, 0xE2, 0xF5,
-/*1C40*/0x38, 0x12, 0x08, 0xEE, 0xF5, 0x39, 0x8E, 0x3A,
- 0x1E, 0x80, 0xBC, 0x22, 0x75, 0x58, 0x01, 0xE5,
-/*1C50*/0x35, 0x70, 0x0C, 0x12, 0x07, 0xCC, 0xE0, 0xF5,
- 0x4A, 0x12, 0x07, 0xD8, 0xE0, 0xF5, 0x4C, 0xE5,
-/*1C60*/0x35, 0xB4, 0x04, 0x0C, 0x12, 0x07, 0xE4, 0xE0,
- 0xF5, 0x4A, 0x12, 0x07, 0xF0, 0xE0, 0xF5, 0x4C,
-/*1C70*/0xE5, 0x35, 0xB4, 0x01, 0x04, 0x7F, 0x01, 0x80,
- 0x02, 0x7F, 0x00, 0xE5, 0x35, 0xB4, 0x02, 0x04,
-/*1C80*/0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F,
- 0x60, 0x0C, 0x12, 0x07, 0xFC, 0xE0, 0xF5, 0x4A,
-/*1C90*/0x12, 0x08, 0x08, 0xE0, 0xF5, 0x4C, 0x85, 0x41,
- 0x49, 0x85, 0x40, 0x4B, 0x22, 0x75, 0x5B, 0x01,
-/*1CA0*/0x90, 0x07, 0x24, 0x12, 0x07, 0x35, 0xE0, 0x54,
- 0x1F, 0xFF, 0xD3, 0x94, 0x02, 0x50, 0x04, 0x8F,
-/*1CB0*/0x58, 0x80, 0x05, 0xEF, 0x24, 0xFE, 0xF5, 0x58,
- 0xEF, 0xC3, 0x94, 0x18, 0x40, 0x05, 0x75, 0x59,
-/*1CC0*/0x18, 0x80, 0x04, 0xEF, 0x04, 0xF5, 0x59, 0x85,
- 0x43, 0x5A, 0xAF, 0x58, 0x7E, 0x00, 0xAD, 0x59,
-/*1CD0*/0x7C, 0x00, 0xAB, 0x5B, 0x7A, 0x00, 0x12, 0x15,
- 0x41, 0xAF, 0x5A, 0x7E, 0x00, 0x12, 0x18, 0x0A,
-/*1CE0*/0xAF, 0x5B, 0x7E, 0x00, 0x02, 0x1A, 0xFF, 0xE5,
- 0xE2, 0x30, 0xE7, 0x0E, 0x12, 0x10, 0x03, 0xC2,
-/*1CF0*/0x30, 0x30, 0x30, 0x03, 0x12, 0x10, 0xFF, 0x20,
- 0x33, 0x28, 0xE5, 0xE7, 0x30, 0xE7, 0x05, 0x12,
-/*1D00*/0x0E, 0xA2, 0x80, 0x0D, 0xE5, 0xFE, 0xC3, 0x94,
- 0x20, 0x50, 0x06, 0x12, 0x0E, 0xA2, 0x43, 0xF9,
-/*1D10*/0x08, 0xE5, 0xF2, 0x30, 0xE7, 0x03, 0x53, 0xF9,
- 0x7F, 0xE5, 0xF1, 0x54, 0x70, 0xD3, 0x94, 0x00,
-/*1D20*/0x50, 0xD8, 0x22, 0x12, 0x0E, 0x04, 0x75, 0x83,
- 0x80, 0xE4, 0xF0, 0xE5, 0x08, 0x44, 0x07, 0x12,
-/*1D30*/0x0D, 0xFD, 0x75, 0x83, 0x84, 0x12, 0x0E, 0x02,
- 0x75, 0x83, 0x86, 0x12, 0x0E, 0x02, 0x75, 0x83,
-/*1D40*/0x8C, 0xE0, 0x54, 0xF3, 0x12, 0x0E, 0x03, 0x75,
- 0x83, 0x8E, 0x12, 0x0E, 0x02, 0x75, 0x83, 0x94,
-/*1D50*/0xE0, 0x54, 0xFB, 0xF0, 0x22, 0x12, 0x07, 0x2A,
- 0x75, 0x83, 0x8E, 0xE4, 0x12, 0x07, 0x29, 0x74,
-/*1D60*/0x01, 0x12, 0x07, 0x29, 0xE4, 0x12, 0x08, 0xBE,
- 0x75, 0x83, 0x8C, 0xE0, 0x44, 0x20, 0x12, 0x08,
-/*1D70*/0xBE, 0xE0, 0x54, 0xDF, 0xF0, 0x74, 0x84, 0x85,
- 0x08, 0x82, 0xF5, 0x83, 0xE0, 0x54, 0x7F, 0xF0,
-/*1D80*/0xE0, 0x44, 0x80, 0xF0, 0x22, 0x75, 0x56, 0x01,
- 0xE4, 0xFD, 0xF5, 0x57, 0xAF, 0x35, 0xFE, 0xFC,
-/*1D90*/0x12, 0x09, 0x15, 0x12, 0x1C, 0x9D, 0x12, 0x1E,
- 0x7A, 0x12, 0x1C, 0x4C, 0xAF, 0x57, 0x7E, 0x00,
-/*1DA0*/0xAD, 0x56, 0x7C, 0x00, 0x12, 0x04, 0x44, 0xAF,
- 0x56, 0x7E, 0x00, 0x02, 0x11, 0xEE, 0x75, 0x56,
-/*1DB0*/0x01, 0xE4, 0xFD, 0xF5, 0x57, 0xAF, 0x35, 0xFE,
- 0xFC, 0x12, 0x09, 0x15, 0x12, 0x1C, 0x9D, 0x12,
-/*1DC0*/0x1E, 0x7A, 0x12, 0x1C, 0x4C, 0xAF, 0x57, 0x7E,
- 0x00, 0xAD, 0x56, 0x7C, 0x00, 0x12, 0x04, 0x44,
-/*1DD0*/0xAF, 0x56, 0x7E, 0x00, 0x02, 0x11, 0xEE, 0xE4,
- 0xF5, 0x16, 0x12, 0x0E, 0x44, 0xFE, 0xE5, 0x08,
-/*1DE0*/0x44, 0x05, 0xFF, 0x12, 0x0E, 0x65, 0x8F, 0x82,
- 0x8E, 0x83, 0xF0, 0x05, 0x16, 0xE5, 0x16, 0xC3,
-/*1DF0*/0x94, 0x14, 0x40, 0xE6, 0xE5, 0x08, 0x12, 0x0E,
- 0x2B, 0xE4, 0xF0, 0x22, 0xE4, 0xF5, 0x58, 0xF5,
-/*1E00*/0x59, 0xF5, 0x5A, 0xFF, 0xFE, 0xAD, 0x58, 0xFC,
- 0x12, 0x09, 0x15, 0x7F, 0x04, 0x7E, 0x00, 0xAD,
-/*1E10*/0x58, 0x7C, 0x00, 0x12, 0x09, 0x15, 0x7F, 0x02,
- 0x7E, 0x00, 0xAD, 0x58, 0x7C, 0x00, 0x02, 0x09,
-/*1E20*/0x15, 0xE5, 0x3C, 0x25, 0x3E, 0xFC, 0xE5, 0x42,
- 0x24, 0x00, 0xFB, 0xE4, 0x33, 0xFA, 0xEC, 0xC3,
-/*1E30*/0x9B, 0xEA, 0x12, 0x07, 0x6B, 0x40, 0x0B, 0x8C,
- 0x42, 0xE5, 0x3D, 0x25, 0x3F, 0xF5, 0x41, 0x8F,
-/*1E40*/0x40, 0x22, 0x12, 0x09, 0x0B, 0x22, 0x74, 0x84,
- 0xF5, 0x18, 0x85, 0x08, 0x19, 0x85, 0x19, 0x82,
-/*1E50*/0x85, 0x18, 0x83, 0xE0, 0x54, 0x7F, 0xF0, 0xE0,
- 0x44, 0x80, 0xF0, 0xE0, 0x44, 0x80, 0xF0, 0x22,
-/*1E60*/0xEF, 0x4E, 0x70, 0x0B, 0x12, 0x07, 0x2A, 0x75,
- 0x83, 0xD2, 0xE0, 0x54, 0xDF, 0xF0, 0x22, 0x12,
-/*1E70*/0x07, 0x2A, 0x75, 0x83, 0xD2, 0xE0, 0x44, 0x20,
- 0xF0, 0x22, 0x75, 0x58, 0x01, 0x90, 0x07, 0x26,
-/*1E80*/0x12, 0x07, 0x35, 0xE0, 0x54, 0x3F, 0xF5, 0x41,
- 0x12, 0x07, 0x32, 0xE0, 0x54, 0x3F, 0xF5, 0x40,
-/*1E90*/0x22, 0x75, 0x56, 0x02, 0xE4, 0xF5, 0x57, 0x12,
- 0x1D, 0xFC, 0xAF, 0x57, 0x7E, 0x00, 0xAD, 0x56,
-/*1EA0*/0x7C, 0x00, 0x02, 0x04, 0x44, 0xE4, 0xF5, 0x42,
- 0xF5, 0x41, 0xF5, 0x40, 0xF5, 0x38, 0xF5, 0x39,
-/*1EB0*/0xF5, 0x3A, 0x22, 0xEF, 0x54, 0x07, 0xFF, 0xE5,
- 0xF9, 0x54, 0xF8, 0x4F, 0xF5, 0xF9, 0x22, 0x7F,
-/*1EC0*/0x01, 0xE4, 0xFE, 0x0F, 0x0E, 0xBE, 0xFF, 0xFB,
- 0x22, 0x01, 0x20, 0x00, 0x01, 0x04, 0x20, 0x00,
-/*1ED0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1EE0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1EF0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F00*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F10*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F20*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F30*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F40*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F50*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F60*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F70*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F80*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F90*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FA0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FB0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FC0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FD0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FE0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FF0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x01, 0x20, 0x11, 0x00, 0x04, 0x20, 0x00, 0x81
-};
-
-int qib_sd7220_ib_load(struct qib_devdata *dd)
-{
- return qib_sd7220_prog_ld(dd, IB_7220_SERDES, qib_sd7220_ib_img,
- sizeof(qib_sd7220_ib_img), 0);
-}
-
-int qib_sd7220_ib_vfy(struct qib_devdata *dd)
-{
- return qib_sd7220_prog_vfy(dd, IB_7220_SERDES, qib_sd7220_ib_img,
- sizeof(qib_sd7220_ib_img), 0);
-}
diff --git a/drivers/infiniband/hw/qib/qib_tx.c b/drivers/infiniband/hw/qib/qib_tx.c
index f7eb1dd..af30232 100644
--- a/drivers/infiniband/hw/qib/qib_tx.c
+++ b/drivers/infiniband/hw/qib/qib_tx.c
@@ -340,9 +340,13 @@
if (i < dd->piobcnt2k)
buf = (u32 __iomem *)(dd->pio2kbase +
i * dd->palign);
- else
+ else if (i < dd->piobcnt2k + dd->piobcnt4k || !dd->piovl15base)
buf = (u32 __iomem *)(dd->pio4kbase +
(i - dd->piobcnt2k) * dd->align4k);
+ else
+ buf = (u32 __iomem *)(dd->piovl15base +
+ (i - (dd->piobcnt2k + dd->piobcnt4k)) *
+ dd->align4k);
if (pbufnum)
*pbufnum = i;
dd->upd_pio_shadow = 0;
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index df3eb8c..b4b2257 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -1163,7 +1163,7 @@
return ret ? ret : count;
}
-static DEVICE_ATTR(create_child, S_IWUGO, NULL, create_child);
+static DEVICE_ATTR(create_child, S_IWUSR, NULL, create_child);
static ssize_t delete_child(struct device *dev,
struct device_attribute *attr,
@@ -1183,7 +1183,7 @@
return ret ? ret : count;
}
-static DEVICE_ATTR(delete_child, S_IWUGO, NULL, delete_child);
+static DEVICE_ATTR(delete_child, S_IWUSR, NULL, delete_child);
int ipoib_add_pkey_attr(struct net_device *dev)
{
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 423e0e6..34157bb 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -47,15 +47,15 @@
struct mutex mutex;
struct device dev;
- struct js_corr corr[ABS_MAX + 1];
+ struct js_corr corr[ABS_CNT];
struct JS_DATA_SAVE_TYPE glue;
int nabs;
int nkey;
__u16 keymap[KEY_MAX - BTN_MISC + 1];
__u16 keypam[KEY_MAX - BTN_MISC + 1];
- __u8 absmap[ABS_MAX + 1];
- __u8 abspam[ABS_MAX + 1];
- __s16 abs[ABS_MAX + 1];
+ __u8 absmap[ABS_CNT];
+ __u8 abspam[ABS_CNT];
+ __s16 abs[ABS_CNT];
};
struct joydev_client {
@@ -826,7 +826,7 @@
joydev->handle.handler = handler;
joydev->handle.private = joydev;
- for (i = 0; i < ABS_MAX + 1; i++)
+ for (i = 0; i < ABS_CNT; i++)
if (test_bit(i, dev->absbit)) {
joydev->absmap[i] = joydev->nabs;
joydev->abspam[joydev->nabs] = i;
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index d8fa5d7..3525f53 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -73,7 +73,7 @@
default y
select SERIO
select SERIO_LIBPS2
- select SERIO_I8042 if X86 && !X86_MRST
+ select SERIO_I8042 if X86
select SERIO_GSCPS2 if GSC
help
Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index 4771ab1..744600e 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -287,7 +287,6 @@
free_irq(client->irq, kpad);
cancel_delayed_work_sync(&kpad->work);
input_unregister_device(kpad->input);
- i2c_set_clientdata(client, NULL);
kfree(kpad);
return 0;
diff --git a/drivers/input/keyboard/amikbd.c b/drivers/input/keyboard/amikbd.c
index 35149ec..79172af 100644
--- a/drivers/input/keyboard/amikbd.c
+++ b/drivers/input/keyboard/amikbd.c
@@ -35,6 +35,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/keyboard.h>
+#include <linux/platform_device.h>
#include <asm/amigaints.h>
#include <asm/amigahw.h>
@@ -154,10 +155,9 @@
[7] = KERN_WARNING "amikbd: keyboard interrupt\n"
};
-static struct input_dev *amikbd_dev;
-
-static irqreturn_t amikbd_interrupt(int irq, void *dummy)
+static irqreturn_t amikbd_interrupt(int irq, void *data)
{
+ struct input_dev *dev = data;
unsigned char scancode, down;
scancode = ~ciaa.sdr; /* get and invert scancode (keyboard is active low) */
@@ -170,47 +170,42 @@
if (scancode < 0x78) { /* scancodes < 0x78 are keys */
if (scancode == 98) { /* CapsLock is a toggle switch key on Amiga */
- input_report_key(amikbd_dev, scancode, 1);
- input_report_key(amikbd_dev, scancode, 0);
+ input_report_key(dev, scancode, 1);
+ input_report_key(dev, scancode, 0);
} else {
- input_report_key(amikbd_dev, scancode, down);
+ input_report_key(dev, scancode, down);
}
- input_sync(amikbd_dev);
+ input_sync(dev);
} else /* scancodes >= 0x78 are error codes */
printk(amikbd_messages[scancode - 0x78]);
return IRQ_HANDLED;
}
-static int __init amikbd_init(void)
+static int __init amikbd_probe(struct platform_device *pdev)
{
+ struct input_dev *dev;
int i, j, err;
- if (!AMIGAHW_PRESENT(AMI_KEYBOARD))
- return -ENODEV;
-
- if (!request_mem_region(CIAA_PHYSADDR-1+0xb00, 0x100, "amikeyb"))
- return -EBUSY;
-
- amikbd_dev = input_allocate_device();
- if (!amikbd_dev) {
- printk(KERN_ERR "amikbd: not enough memory for input device\n");
- err = -ENOMEM;
- goto fail1;
+ dev = input_allocate_device();
+ if (!dev) {
+ dev_err(&pdev->dev, "Not enough memory for input device\n");
+ return -ENOMEM;
}
- amikbd_dev->name = "Amiga Keyboard";
- amikbd_dev->phys = "amikbd/input0";
- amikbd_dev->id.bustype = BUS_AMIGA;
- amikbd_dev->id.vendor = 0x0001;
- amikbd_dev->id.product = 0x0001;
- amikbd_dev->id.version = 0x0100;
+ dev->name = pdev->name;
+ dev->phys = "amikbd/input0";
+ dev->id.bustype = BUS_AMIGA;
+ dev->id.vendor = 0x0001;
+ dev->id.product = 0x0001;
+ dev->id.version = 0x0100;
+ dev->dev.parent = &pdev->dev;
- amikbd_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+ dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
for (i = 0; i < 0x78; i++)
- set_bit(i, amikbd_dev->keybit);
+ set_bit(i, dev->keybit);
for (i = 0; i < MAX_NR_KEYMAPS; i++) {
static u_short temp_map[NR_KEYS] __initdata;
@@ -229,30 +224,54 @@
memcpy(key_maps[i], temp_map, sizeof(temp_map));
}
ciaa.cra &= ~0x41; /* serial data in, turn off TA */
- if (request_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt, 0, "amikbd",
- amikbd_interrupt)) {
- err = -EBUSY;
+ err = request_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt, 0, "amikbd",
+ dev);
+ if (err)
goto fail2;
- }
- err = input_register_device(amikbd_dev);
+ err = input_register_device(dev);
if (err)
goto fail3;
+ platform_set_drvdata(pdev, dev);
+
return 0;
- fail3: free_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt);
- fail2: input_free_device(amikbd_dev);
- fail1: release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100);
+ fail3: free_irq(IRQ_AMIGA_CIAA_SP, dev);
+ fail2: input_free_device(dev);
return err;
}
-static void __exit amikbd_exit(void)
+static int __exit amikbd_remove(struct platform_device *pdev)
{
- free_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt);
- input_unregister_device(amikbd_dev);
- release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100);
+ struct input_dev *dev = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+ free_irq(IRQ_AMIGA_CIAA_SP, dev);
+ input_unregister_device(dev);
+ return 0;
+}
+
+static struct platform_driver amikbd_driver = {
+ .remove = __exit_p(amikbd_remove),
+ .driver = {
+ .name = "amiga-keyboard",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init amikbd_init(void)
+{
+ return platform_driver_probe(&amikbd_driver, amikbd_probe);
}
module_init(amikbd_init);
+
+static void __exit amikbd_exit(void)
+{
+ platform_driver_unregister(&amikbd_driver);
+}
+
module_exit(amikbd_exit);
+
+MODULE_ALIAS("platform:amiga-keyboard");
diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c
index bc69693..40b032f 100644
--- a/drivers/input/keyboard/lm8323.c
+++ b/drivers/input/keyboard/lm8323.c
@@ -778,8 +778,6 @@
struct lm8323_chip *lm = i2c_get_clientdata(client);
int i;
- i2c_set_clientdata(client, NULL);
-
disable_irq_wake(client->irq);
free_irq(client->irq, lm);
cancel_work_sync(&lm->work);
diff --git a/drivers/input/keyboard/max7359_keypad.c b/drivers/input/keyboard/max7359_keypad.c
index 7fc8185..9091ff5 100644
--- a/drivers/input/keyboard/max7359_keypad.c
+++ b/drivers/input/keyboard/max7359_keypad.c
@@ -265,7 +265,6 @@
free_irq(client->irq, keypad);
input_unregister_device(keypad->input_dev);
- i2c_set_clientdata(client, NULL);
kfree(keypad);
return 0;
diff --git a/drivers/input/keyboard/qt2160.c b/drivers/input/keyboard/qt2160.c
index 31f3008..fac6951 100644
--- a/drivers/input/keyboard/qt2160.c
+++ b/drivers/input/keyboard/qt2160.c
@@ -358,7 +358,6 @@
input_unregister_device(qt2160->input);
kfree(qt2160);
- i2c_set_clientdata(client, NULL);
return 0;
}
diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c
index 493c93f..00137be 100644
--- a/drivers/input/keyboard/tca6416-keypad.c
+++ b/drivers/input/keyboard/tca6416-keypad.c
@@ -316,8 +316,6 @@
input_unregister_device(chip->input);
kfree(chip);
- i2c_set_clientdata(client, NULL);
-
return 0;
}
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 48cdabe..c44b9ea 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -80,6 +80,16 @@
tristate "M68k Beeper support"
depends on M68K
+config INPUT_MAX8925_ONKEY
+ tristate "MAX8925 ONKEY support"
+ depends on MFD_MAX8925
+ help
+ Support the ONKEY of MAX8925 PMICs as an input device
+ reporting power button status.
+
+ To compile this driver as a module, choose M here: the module
+ will be called max8925_onkey.
+
config INPUT_APANEL
tristate "Fujitsu Lifebook Application Panel buttons"
depends on X86 && I2C && LEDS_CLASS
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index f9f5770..71fe57d 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -20,6 +20,7 @@
obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
+obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o
obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o
obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o
obj-$(CONFIG_INPUT_PCF8574) += pcf8574_keypad.o
diff --git a/drivers/input/misc/ad714x-i2c.c b/drivers/input/misc/ad714x-i2c.c
index e9adbe4..2bef8fa 100644
--- a/drivers/input/misc/ad714x-i2c.c
+++ b/drivers/input/misc/ad714x-i2c.c
@@ -97,7 +97,6 @@
struct ad714x_chip *chip = i2c_get_clientdata(client);
ad714x_remove(chip);
- i2c_set_clientdata(client, NULL);
return 0;
}
diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c
index e00a1cc..c190664 100644
--- a/drivers/input/misc/hp_sdc_rtc.c
+++ b/drivers/input/misc/hp_sdc_rtc.c
@@ -678,7 +678,7 @@
.llseek = no_llseek,
.read = hp_sdc_rtc_read,
.poll = hp_sdc_rtc_poll,
- .unlocked_ioctl = hp_sdc_rtc_ioctl,
+ .unlocked_ioctl = hp_sdc_rtc_unlocked_ioctl,
.open = hp_sdc_rtc_open,
.fasync = hp_sdc_rtc_fasync,
};
diff --git a/drivers/input/misc/max8925_onkey.c b/drivers/input/misc/max8925_onkey.c
new file mode 100644
index 0000000..80af446
--- /dev/null
+++ b/drivers/input/misc/max8925_onkey.c
@@ -0,0 +1,148 @@
+/**
+ * max8925_onkey.c - MAX8925 ONKEY driver
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ * Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/max8925.h>
+#include <linux/slab.h>
+
+#define HARDRESET_EN (1 << 7)
+#define PWREN_EN (1 << 7)
+
+struct max8925_onkey_info {
+ struct input_dev *idev;
+ struct i2c_client *i2c;
+ int irq;
+};
+
+/*
+ * MAX8925 gives us an interrupt when ONKEY is held for 3 seconds.
+ * max8925_set_bits() operates I2C bus and may sleep. So implement
+ * it in thread IRQ handler.
+ */
+static irqreturn_t max8925_onkey_handler(int irq, void *data)
+{
+ struct max8925_onkey_info *info = data;
+
+ input_report_key(info->idev, KEY_POWER, 1);
+ input_sync(info->idev);
+
+ /* Enable hardreset to halt if system isn't shutdown on time */
+ max8925_set_bits(info->i2c, MAX8925_SYSENSEL,
+ HARDRESET_EN, HARDRESET_EN);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit max8925_onkey_probe(struct platform_device *pdev)
+{
+ struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
+ struct max8925_onkey_info *info;
+ int error;
+
+ info = kzalloc(sizeof(struct max8925_onkey_info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->i2c = chip->i2c;
+ info->irq = chip->irq_base + MAX8925_IRQ_GPM_SW_3SEC;
+
+ info->idev = input_allocate_device();
+ if (!info->idev) {
+ dev_err(chip->dev, "Failed to allocate input dev\n");
+ error = -ENOMEM;
+ goto out_input;
+ }
+
+ info->idev->name = "max8925_on";
+ info->idev->phys = "max8925_on/input0";
+ info->idev->id.bustype = BUS_I2C;
+ info->idev->dev.parent = &pdev->dev;
+ info->idev->evbit[0] = BIT_MASK(EV_KEY);
+ info->idev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
+
+ error = request_threaded_irq(info->irq, NULL, max8925_onkey_handler,
+ IRQF_ONESHOT, "onkey", info);
+ if (error < 0) {
+ dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+ info->irq, error);
+ goto out_irq;
+ }
+
+ error = input_register_device(info->idev);
+ if (error) {
+ dev_err(chip->dev, "Can't register input device: %d\n", error);
+ goto out;
+ }
+
+ platform_set_drvdata(pdev, info);
+
+ return 0;
+
+out:
+ free_irq(info->irq, info);
+out_irq:
+ input_free_device(info->idev);
+out_input:
+ kfree(info);
+ return error;
+}
+
+static int __devexit max8925_onkey_remove(struct platform_device *pdev)
+{
+ struct max8925_onkey_info *info = platform_get_drvdata(pdev);
+
+ free_irq(info->irq, info);
+ input_unregister_device(info->idev);
+ kfree(info);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver max8925_onkey_driver = {
+ .driver = {
+ .name = "max8925-onkey",
+ .owner = THIS_MODULE,
+ },
+ .probe = max8925_onkey_probe,
+ .remove = __devexit_p(max8925_onkey_remove),
+};
+
+static int __init max8925_onkey_init(void)
+{
+ return platform_driver_register(&max8925_onkey_driver);
+}
+module_init(max8925_onkey_init);
+
+static void __exit max8925_onkey_exit(void)
+{
+ platform_driver_unregister(&max8925_onkey_driver);
+}
+module_exit(max8925_onkey_exit);
+
+MODULE_DESCRIPTION("Maxim MAX8925 ONKEY driver");
+MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/pcf8574_keypad.c b/drivers/input/misc/pcf8574_keypad.c
index 5c3ac4e..4b42ffc 100644
--- a/drivers/input/misc/pcf8574_keypad.c
+++ b/drivers/input/misc/pcf8574_keypad.c
@@ -69,7 +69,7 @@
unsigned char nextstate = read_state(lp);
if (lp->laststate != nextstate) {
- int key_down = nextstate <= ARRAY_SIZE(lp->btncode);
+ int key_down = nextstate < ARRAY_SIZE(lp->btncode);
unsigned short keycode = key_down ?
lp->btncode[nextstate] : lp->btncode[lp->laststate];
@@ -168,8 +168,6 @@
input_unregister_device(lp->idev);
kfree(lp);
- i2c_set_clientdata(client, NULL);
-
return 0;
}
diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c
index fee9eac..4f9b2af 100644
--- a/drivers/input/misc/twl4030-vibra.c
+++ b/drivers/input/misc/twl4030-vibra.c
@@ -90,8 +90,8 @@
twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
(reg & ~TWL4030_VIBRA_EN), TWL4030_REG_VIBRA_CTL);
- twl4030_codec_disable_resource(TWL4030_CODEC_RES_POWER);
twl4030_codec_disable_resource(TWL4030_CODEC_RES_APLL);
+ twl4030_codec_disable_resource(TWL4030_CODEC_RES_POWER);
info->enabled = false;
}
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index 1477466..b71eb55 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -300,7 +300,7 @@
unsigned int cnt;
int retval = 0;
- for (cnt = 0; cnt < ABS_MAX + 1; cnt++) {
+ for (cnt = 0; cnt < ABS_CNT; cnt++) {
if (!test_bit(cnt, dev->absbit))
continue;
@@ -387,7 +387,7 @@
dev->id.product = user_dev->id.product;
dev->id.version = user_dev->id.version;
- size = sizeof(int) * (ABS_MAX + 1);
+ size = sizeof(int) * ABS_CNT;
memcpy(dev->absmax, user_dev->absmax, size);
memcpy(dev->absmin, user_dev->absmin, size);
memcpy(dev->absfuzz, user_dev->absfuzz, size);
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index eeb58c1c..c714ca2 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -17,7 +17,7 @@
default y
select SERIO
select SERIO_LIBPS2
- select SERIO_I8042 if X86 && !X86_MRST
+ select SERIO_I8042 if X86
select SERIO_GSCPS2 if GSC
help
Say Y here if you have a PS/2 mouse connected to your system. This
diff --git a/drivers/input/mouse/amimouse.c b/drivers/input/mouse/amimouse.c
index a185ac7..ff5f61a 100644
--- a/drivers/input/mouse/amimouse.c
+++ b/drivers/input/mouse/amimouse.c
@@ -21,6 +21,7 @@
#include <linux/init.h>
#include <linux/input.h>
#include <linux/interrupt.h>
+#include <linux/platform_device.h>
#include <asm/irq.h>
#include <asm/setup.h>
@@ -34,10 +35,10 @@
MODULE_LICENSE("GPL");
static int amimouse_lastx, amimouse_lasty;
-static struct input_dev *amimouse_dev;
-static irqreturn_t amimouse_interrupt(int irq, void *dummy)
+static irqreturn_t amimouse_interrupt(int irq, void *data)
{
+ struct input_dev *dev = data;
unsigned short joy0dat, potgor;
int nx, ny, dx, dy;
@@ -59,14 +60,14 @@
potgor = amiga_custom.potgor;
- input_report_rel(amimouse_dev, REL_X, dx);
- input_report_rel(amimouse_dev, REL_Y, dy);
+ input_report_rel(dev, REL_X, dx);
+ input_report_rel(dev, REL_Y, dy);
- input_report_key(amimouse_dev, BTN_LEFT, ciaa.pra & 0x40);
- input_report_key(amimouse_dev, BTN_MIDDLE, potgor & 0x0100);
- input_report_key(amimouse_dev, BTN_RIGHT, potgor & 0x0400);
+ input_report_key(dev, BTN_LEFT, ciaa.pra & 0x40);
+ input_report_key(dev, BTN_MIDDLE, potgor & 0x0100);
+ input_report_key(dev, BTN_RIGHT, potgor & 0x0400);
- input_sync(amimouse_dev);
+ input_sync(dev);
return IRQ_HANDLED;
}
@@ -74,63 +75,90 @@
static int amimouse_open(struct input_dev *dev)
{
unsigned short joy0dat;
+ int error;
joy0dat = amiga_custom.joy0dat;
amimouse_lastx = joy0dat & 0xff;
amimouse_lasty = joy0dat >> 8;
- if (request_irq(IRQ_AMIGA_VERTB, amimouse_interrupt, 0, "amimouse", amimouse_interrupt)) {
- printk(KERN_ERR "amimouse.c: Can't allocate irq %d\n", IRQ_AMIGA_VERTB);
- return -EBUSY;
- }
+ error = request_irq(IRQ_AMIGA_VERTB, amimouse_interrupt, 0, "amimouse",
+ dev);
+ if (error)
+ dev_err(&dev->dev, "Can't allocate irq %d\n", IRQ_AMIGA_VERTB);
- return 0;
+ return error;
}
static void amimouse_close(struct input_dev *dev)
{
- free_irq(IRQ_AMIGA_VERTB, amimouse_interrupt);
+ free_irq(IRQ_AMIGA_VERTB, dev);
}
-static int __init amimouse_init(void)
+static int __init amimouse_probe(struct platform_device *pdev)
{
int err;
+ struct input_dev *dev;
- if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_MOUSE))
- return -ENODEV;
-
- amimouse_dev = input_allocate_device();
- if (!amimouse_dev)
+ dev = input_allocate_device();
+ if (!dev)
return -ENOMEM;
- amimouse_dev->name = "Amiga mouse";
- amimouse_dev->phys = "amimouse/input0";
- amimouse_dev->id.bustype = BUS_AMIGA;
- amimouse_dev->id.vendor = 0x0001;
- amimouse_dev->id.product = 0x0002;
- amimouse_dev->id.version = 0x0100;
+ dev->name = pdev->name;
+ dev->phys = "amimouse/input0";
+ dev->id.bustype = BUS_AMIGA;
+ dev->id.vendor = 0x0001;
+ dev->id.product = 0x0002;
+ dev->id.version = 0x0100;
- amimouse_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
- amimouse_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
- amimouse_dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
+ dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
+ dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
+ dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
- amimouse_dev->open = amimouse_open;
- amimouse_dev->close = amimouse_close;
+ dev->open = amimouse_open;
+ dev->close = amimouse_close;
+ dev->dev.parent = &pdev->dev;
- err = input_register_device(amimouse_dev);
+ err = input_register_device(dev);
if (err) {
- input_free_device(amimouse_dev);
+ input_free_device(dev);
return err;
}
+ platform_set_drvdata(pdev, dev);
+
return 0;
}
-static void __exit amimouse_exit(void)
+static int __exit amimouse_remove(struct platform_device *pdev)
{
- input_unregister_device(amimouse_dev);
+ struct input_dev *dev = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+ input_unregister_device(dev);
+ return 0;
+}
+
+static struct platform_driver amimouse_driver = {
+ .remove = __exit_p(amimouse_remove),
+ .driver = {
+ .name = "amiga-mouse",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init amimouse_init(void)
+{
+ return platform_driver_probe(&amimouse_driver, amimouse_probe);
}
module_init(amimouse_init);
+
+static void __exit amimouse_exit(void)
+{
+ platform_driver_unregister(&amimouse_driver);
+}
+
module_exit(amimouse_exit);
+
+MODULE_ALIAS("platform:amiga-mouse");
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 40cea33..9ba9c4a 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -206,6 +206,7 @@
unsigned char max[3];
if (SYN_ID_MAJOR(priv->identity) < 4)
+ return 0;
if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, res) == 0) {
if (res[0] != 0 && (res[1] & 0x80) && res[2] != 0) {
diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c
index 8291e73..0ae62f0 100644
--- a/drivers/input/mouse/synaptics_i2c.c
+++ b/drivers/input/mouse/synaptics_i2c.c
@@ -613,7 +613,6 @@
free_irq(client->irq, touch);
input_unregister_device(touch->input);
- i2c_set_clientdata(client, NULL);
kfree(touch);
return 0;
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index f34f1db..3bfe8fa 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -21,7 +21,8 @@
config SERIO_I8042
tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
default y
- depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K && !BLACKFIN
+ depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && \
+ (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN
help
i8042 is the chip over which the standard AT keyboard and PS/2
mouse are connected to the computer. If you use these devices,
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 6168469..81003c4 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -7,6 +7,10 @@
* the Free Software Foundation.
*/
+#ifdef CONFIG_X86
+#include <asm/x86_init.h>
+#endif
+
/*
* Names.
*/
@@ -840,6 +844,12 @@
{
int retval;
+#ifdef CONFIG_X86
+ /* Just return if pre-detection shows no i8042 controller exist */
+ if (!x86_platform.i8042_detect())
+ return -ENODEV;
+#endif
+
/*
* On ix86 platforms touching the i8042 data register region can do really
* bad things. Because of this the region is always reserved on ix86 boxes.
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 2dc0c07..42ba369 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -508,7 +508,6 @@
}
input_dev->name = wacom_wac->name;
- input_dev->name = wacom_wac->name;
input_dev->dev.parent = &intf->dev;
input_dev->open = wacom_open;
input_dev->close = wacom_close;
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 847fd01..415f630 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -284,12 +284,13 @@
(data[4] << 20) + (data[5] << 12) +
(data[6] << 4) + (data[7] >> 4);
- wacom->id[idx] = (data[2] << 4) | (data[3] >> 4);
+ wacom->id[idx] = (data[2] << 4) | (data[3] >> 4) |
+ ((data[7] & 0x0f) << 20) | ((data[8] & 0xf0) << 12);
- switch (wacom->id[idx]) {
+ switch (wacom->id[idx] & 0xfffff) {
case 0x812: /* Inking pen */
case 0x801: /* Intuos3 Inking pen */
- case 0x20802: /* Intuos4 Classic Pen */
+ case 0x20802: /* Intuos4 Inking Pen */
case 0x012:
wacom->tool[idx] = BTN_TOOL_PENCIL;
break;
@@ -300,7 +301,7 @@
case 0x823: /* Intuos3 Grip Pen */
case 0x813: /* Intuos3 Classic Pen */
case 0x885: /* Intuos3 Marker Pen */
- case 0x802: /* Intuos4 Grip Pen Eraser */
+ case 0x802: /* Intuos4 General Pen */
case 0x804: /* Intuos4 Marker Pen */
case 0x40802: /* Intuos4 Classic Pen */
case 0x022:
@@ -335,7 +336,7 @@
case 0x81b: /* Intuos3 Classic Pen Eraser */
case 0x91b: /* Intuos3 Airbrush Eraser */
case 0x80c: /* Intuos4 Marker Pen Eraser */
- case 0x80a: /* Intuos4 Grip Pen Eraser */
+ case 0x80a: /* Intuos4 General Pen Eraser */
case 0x4080a: /* Intuos4 Classic Pen Eraser */
case 0x90a: /* Intuos4 Airbrush Eraser */
wacom->tool[idx] = BTN_TOOL_RUBBER;
@@ -356,6 +357,11 @@
return 1;
}
+ /* older I4 styli don't work with new Cintiqs */
+ if (!((wacom->id[idx] >> 20) & 0x01) &&
+ (features->type == WACOM_21UX2))
+ return 1;
+
/* Exit report */
if ((data[1] & 0xfe) == 0x80) {
/*
@@ -474,21 +480,43 @@
input_report_abs(input, ABS_MISC, 0);
}
} else {
- input_report_key(input, BTN_0, (data[5] & 0x01));
- input_report_key(input, BTN_1, (data[5] & 0x02));
- input_report_key(input, BTN_2, (data[5] & 0x04));
- input_report_key(input, BTN_3, (data[5] & 0x08));
- input_report_key(input, BTN_4, (data[6] & 0x01));
- input_report_key(input, BTN_5, (data[6] & 0x02));
- input_report_key(input, BTN_6, (data[6] & 0x04));
- input_report_key(input, BTN_7, (data[6] & 0x08));
- input_report_key(input, BTN_8, (data[5] & 0x10));
- input_report_key(input, BTN_9, (data[6] & 0x10));
+ if (features->type == WACOM_21UX2) {
+ input_report_key(input, BTN_0, (data[5] & 0x01));
+ input_report_key(input, BTN_1, (data[6] & 0x01));
+ input_report_key(input, BTN_2, (data[6] & 0x02));
+ input_report_key(input, BTN_3, (data[6] & 0x04));
+ input_report_key(input, BTN_4, (data[6] & 0x08));
+ input_report_key(input, BTN_5, (data[6] & 0x10));
+ input_report_key(input, BTN_6, (data[6] & 0x20));
+ input_report_key(input, BTN_7, (data[6] & 0x40));
+ input_report_key(input, BTN_8, (data[6] & 0x80));
+ input_report_key(input, BTN_9, (data[7] & 0x01));
+ input_report_key(input, BTN_A, (data[8] & 0x01));
+ input_report_key(input, BTN_B, (data[8] & 0x02));
+ input_report_key(input, BTN_C, (data[8] & 0x04));
+ input_report_key(input, BTN_X, (data[8] & 0x08));
+ input_report_key(input, BTN_Y, (data[8] & 0x10));
+ input_report_key(input, BTN_Z, (data[8] & 0x20));
+ input_report_key(input, BTN_BASE, (data[8] & 0x40));
+ input_report_key(input, BTN_BASE2, (data[8] & 0x80));
+ } else {
+ input_report_key(input, BTN_0, (data[5] & 0x01));
+ input_report_key(input, BTN_1, (data[5] & 0x02));
+ input_report_key(input, BTN_2, (data[5] & 0x04));
+ input_report_key(input, BTN_3, (data[5] & 0x08));
+ input_report_key(input, BTN_4, (data[6] & 0x01));
+ input_report_key(input, BTN_5, (data[6] & 0x02));
+ input_report_key(input, BTN_6, (data[6] & 0x04));
+ input_report_key(input, BTN_7, (data[6] & 0x08));
+ input_report_key(input, BTN_8, (data[5] & 0x10));
+ input_report_key(input, BTN_9, (data[6] & 0x10));
+ }
input_report_abs(input, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
input_report_abs(input, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
- if ((data[5] & 0x1f) | (data[6] & 0x1f) | (data[1] & 0x1f) |
- data[2] | (data[3] & 0x1f) | data[4]) {
+ if ((data[5] & 0x1f) | data[6] | (data[1] & 0x1f) |
+ data[2] | (data[3] & 0x1f) | data[4] | data[8] |
+ (data[7] & 0x01)) {
input_report_key(input, wacom->tool[1], 1);
input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
} else {
@@ -640,7 +668,7 @@
if (!idx)
input_report_key(input, BTN_TOUCH, 1);
input_event(input, EV_MSC, MSC_SERIAL, finger);
- input_sync(wacom->input);
+ input_sync(input);
wacom->last_finger = finger;
}
@@ -826,6 +854,7 @@
case INTUOS4L:
case CINTIQ:
case WACOM_BEE:
+ case WACOM_21UX2:
sync = wacom_intuos_irq(wacom_wac);
break;
@@ -921,6 +950,17 @@
__set_bit(BTN_STYLUS2, input_dev->keybit);
break;
+ case WACOM_21UX2:
+ __set_bit(BTN_A, input_dev->keybit);
+ __set_bit(BTN_B, input_dev->keybit);
+ __set_bit(BTN_C, input_dev->keybit);
+ __set_bit(BTN_X, input_dev->keybit);
+ __set_bit(BTN_Y, input_dev->keybit);
+ __set_bit(BTN_Z, input_dev->keybit);
+ __set_bit(BTN_BASE, input_dev->keybit);
+ __set_bit(BTN_BASE2, input_dev->keybit);
+ /* fall through */
+
case WACOM_BEE:
__set_bit(BTN_8, input_dev->keybit);
__set_bit(BTN_9, input_dev->keybit);
@@ -1105,6 +1145,8 @@
{ "Wacom Intuos4 8x13", WACOM_PKGLEN_INTUOS, 65024, 40640, 2047, 63, INTUOS4L };
static const struct wacom_features wacom_features_0xBB =
{ "Wacom Intuos4 12x19", WACOM_PKGLEN_INTUOS, 97536, 60960, 2047, 63, INTUOS4L };
+static const struct wacom_features wacom_features_0xBC =
+ { "Wacom Intuos4 WL", WACOM_PKGLEN_INTUOS, 40840, 25400, 2047, 63, INTUOS4 };
static const struct wacom_features wacom_features_0x3F =
{ "Wacom Cintiq 21UX", WACOM_PKGLEN_INTUOS, 87200, 65600, 1023, 63, CINTIQ };
static const struct wacom_features wacom_features_0xC5 =
@@ -1113,6 +1155,8 @@
{ "Wacom Cintiq 12WX", WACOM_PKGLEN_INTUOS, 53020, 33440, 1023, 63, WACOM_BEE };
static const struct wacom_features wacom_features_0xC7 =
{ "Wacom DTU1931", WACOM_PKGLEN_GRAPHIRE, 37832, 30305, 511, 0, PL };
+static const struct wacom_features wacom_features_0xCC =
+ { "Wacom Cintiq 21UX2", WACOM_PKGLEN_INTUOS, 87200, 65600, 2047, 63, WACOM_21UX2 };
static const struct wacom_features wacom_features_0x90 =
{ "Wacom ISDv4 90", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255, 0, TABLETPC };
static const struct wacom_features wacom_features_0x93 =
@@ -1185,10 +1229,12 @@
{ USB_DEVICE_WACOM(0xB9) },
{ USB_DEVICE_WACOM(0xBA) },
{ USB_DEVICE_WACOM(0xBB) },
+ { USB_DEVICE_WACOM(0xBC) },
{ USB_DEVICE_WACOM(0x3F) },
{ USB_DEVICE_WACOM(0xC5) },
{ USB_DEVICE_WACOM(0xC6) },
{ USB_DEVICE_WACOM(0xC7) },
+ { USB_DEVICE_WACOM(0xCC) },
{ USB_DEVICE_WACOM(0x90) },
{ USB_DEVICE_WACOM(0x93) },
{ USB_DEVICE_WACOM(0x9A) },
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 063f1af..854b920 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -50,6 +50,7 @@
INTUOS4S,
INTUOS4,
INTUOS4L,
+ WACOM_21UX2,
CINTIQ,
WACOM_BEE,
WACOM_MO,
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index b9f58ca..3b9d5e2 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -156,7 +156,7 @@
config TOUCHSCREEN_S3C2410
tristate "Samsung S3C2410/generic touchscreen input driver"
depends on ARCH_S3C2410 || SAMSUNG_DEV_TS
- select S3C24XX_ADC
+ select S3C_ADC
help
Say Y here if you have the s3c2410 touchscreen.
@@ -590,4 +590,17 @@
To compile this driver as a module, choose M here: the
module will be called pcap_ts.
+
+config TOUCHSCREEN_TPS6507X
+ tristate "TPS6507x based touchscreens"
+ depends on I2C
+ help
+ Say Y here if you have a TPS6507x based touchscreen
+ controller.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tps6507x_ts.
+
endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 8ad36ee..497964a 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -46,3 +46,4 @@
obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o
+obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index 0d2d7e5..5f0221c 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -679,6 +679,13 @@
return -EINVAL;
}
+ spi->bits_per_word = 16;
+ err = spi_setup(spi);
+ if (err) {
+ dev_dbg(&spi->dev, "spi master doesn't support 16 bits/word\n");
+ return err;
+ }
+
ts = kzalloc(sizeof(struct ad7877), GFP_KERNEL);
input_dev = input_allocate_device();
if (!ts || !input_dev) {
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index 794d070..4b32fb4 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -812,10 +812,8 @@
ts->bus = client;
error = ad7879_construct(client, ts);
- if (error) {
- i2c_set_clientdata(client, NULL);
+ if (error)
kfree(ts);
- }
return error;
}
@@ -825,7 +823,6 @@
struct ad7879 *ts = dev_get_drvdata(&client->dev);
ad7879_destroy(client, ts);
- i2c_set_clientdata(client, NULL);
kfree(ts);
return 0;
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 532279c..a9fdf55 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -1163,8 +1163,8 @@
ts->reg = regulator_get(&spi->dev, "vcc");
if (IS_ERR(ts->reg)) {
- dev_err(&spi->dev, "unable to get regulator: %ld\n",
- PTR_ERR(ts->reg));
+ err = PTR_ERR(ts->reg);
+ dev_err(&spi->dev, "unable to get regulator: %d\n", err);
goto err_free_gpio;
}
diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c
index 75f8b73..7a3a916 100644
--- a/drivers/input/touchscreen/eeti_ts.c
+++ b/drivers/input/touchscreen/eeti_ts.c
@@ -238,7 +238,6 @@
input = NULL; /* so we dont try to free it below */
err1:
input_free_device(input);
- i2c_set_clientdata(client, NULL);
kfree(priv);
err0:
return err;
@@ -256,7 +255,6 @@
enable_irq(priv->irq);
input_unregister_device(priv->input);
- i2c_set_clientdata(client, NULL);
kfree(priv);
return 0;
diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c
index ce8ab02..1fb0c2f 100644
--- a/drivers/input/touchscreen/mcs5000_ts.c
+++ b/drivers/input/touchscreen/mcs5000_ts.c
@@ -256,7 +256,6 @@
free_irq(client->irq, data);
input_unregister_device(data->input_dev);
kfree(data);
- i2c_set_clientdata(client, NULL);
return 0;
}
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
index e0b7c83..6085d12 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -173,7 +173,7 @@
if (down)
s3c_adc_start(ts.client, 0, 1 << ts.shift);
else
- dev_info(ts.dev, "%s: count=%d\n", __func__, ts.count);
+ dev_dbg(ts.dev, "%s: count=%d\n", __func__, ts.count);
if (ts.features & FEAT_PEN_IRQ) {
/* Clear pen down/up interrupt */
@@ -413,6 +413,8 @@
#endif
static struct platform_device_id s3cts_driver_ids[] = {
+ { "s3c2410-ts", 0 },
+ { "s3c2440-ts", 0 },
{ "s3c64xx-ts", FEAT_PEN_IRQ },
{ }
};
diff --git a/drivers/input/touchscreen/tps6507x-ts.c b/drivers/input/touchscreen/tps6507x-ts.c
new file mode 100644
index 0000000..5b70a14
--- /dev/null
+++ b/drivers/input/touchscreen/tps6507x-ts.c
@@ -0,0 +1,396 @@
+/*
+ * drivers/input/touchscreen/tps6507x_ts.c
+ *
+ * Touchscreen driver for the tps6507x chip.
+ *
+ * Copyright (c) 2009 RidgeRun (todd.fischer@ridgerun.com)
+ *
+ * Credits:
+ *
+ * Using code from tsc2007, MtekVision Co., Ltd.
+ *
+ * For licencing details see kernel-base/COPYING
+ *
+ * TPS65070, TPS65073, TPS650731, and TPS650732 support
+ * 10 bit touch screen interface.
+ */
+
+#include <linux/module.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/tps6507x.h>
+#include <linux/input/tps6507x-ts.h>
+#include <linux/delay.h>
+
+#define TSC_DEFAULT_POLL_PERIOD 30 /* ms */
+#define TPS_DEFAULT_MIN_PRESSURE 0x30
+#define MAX_10BIT ((1 << 10) - 1)
+
+#define TPS6507X_ADCONFIG_CONVERT_TS (TPS6507X_ADCONFIG_AD_ENABLE | \
+ TPS6507X_ADCONFIG_START_CONVERSION | \
+ TPS6507X_ADCONFIG_INPUT_REAL_TSC)
+#define TPS6507X_ADCONFIG_POWER_DOWN_TS (TPS6507X_ADCONFIG_INPUT_REAL_TSC)
+
+struct ts_event {
+ u16 x;
+ u16 y;
+ u16 pressure;
+};
+
+struct tps6507x_ts {
+ struct input_dev *input_dev;
+ struct device *dev;
+ char phys[32];
+ struct workqueue_struct *wq;
+ struct delayed_work work;
+ unsigned polling; /* polling is active */
+ struct ts_event tc;
+ struct tps6507x_dev *mfd;
+ u16 model;
+ unsigned pendown;
+ int irq;
+ void (*clear_penirq)(void);
+ unsigned long poll_period; /* ms */
+ u16 min_pressure;
+ int vref; /* non-zero to leave vref on */
+};
+
+static int tps6507x_read_u8(struct tps6507x_ts *tsc, u8 reg, u8 *data)
+{
+ int err;
+
+ err = tsc->mfd->read_dev(tsc->mfd, reg, 1, data);
+
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static int tps6507x_write_u8(struct tps6507x_ts *tsc, u8 reg, u8 data)
+{
+ return tsc->mfd->write_dev(tsc->mfd, reg, 1, &data);
+}
+
+static s32 tps6507x_adc_conversion(struct tps6507x_ts *tsc,
+ u8 tsc_mode, u16 *value)
+{
+ s32 ret;
+ u8 adc_status;
+ u8 result;
+
+ /* Route input signal to A/D converter */
+
+ ret = tps6507x_write_u8(tsc, TPS6507X_REG_TSCMODE, tsc_mode);
+ if (ret) {
+ dev_err(tsc->dev, "TSC mode read failed\n");
+ goto err;
+ }
+
+ /* Start A/D conversion */
+
+ ret = tps6507x_write_u8(tsc, TPS6507X_REG_ADCONFIG,
+ TPS6507X_ADCONFIG_CONVERT_TS);
+ if (ret) {
+ dev_err(tsc->dev, "ADC config write failed\n");
+ return ret;
+ }
+
+ do {
+ ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADCONFIG,
+ &adc_status);
+ if (ret) {
+ dev_err(tsc->dev, "ADC config read failed\n");
+ goto err;
+ }
+ } while (adc_status & TPS6507X_ADCONFIG_START_CONVERSION);
+
+ ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADRESULT_2, &result);
+ if (ret) {
+ dev_err(tsc->dev, "ADC result 2 read failed\n");
+ goto err;
+ }
+
+ *value = (result & TPS6507X_REG_ADRESULT_2_MASK) << 8;
+
+ ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADRESULT_1, &result);
+ if (ret) {
+ dev_err(tsc->dev, "ADC result 1 read failed\n");
+ goto err;
+ }
+
+ *value |= result;
+
+ dev_dbg(tsc->dev, "TSC channel %d = 0x%X\n", tsc_mode, *value);
+
+err:
+ return ret;
+}
+
+/* Need to call tps6507x_adc_standby() after using A/D converter for the
+ * touch screen interrupt to work properly.
+ */
+
+static s32 tps6507x_adc_standby(struct tps6507x_ts *tsc)
+{
+ s32 ret;
+ s32 loops = 0;
+ u8 val;
+
+ ret = tps6507x_write_u8(tsc, TPS6507X_REG_ADCONFIG,
+ TPS6507X_ADCONFIG_INPUT_TSC);
+ if (ret)
+ return ret;
+
+ ret = tps6507x_write_u8(tsc, TPS6507X_REG_TSCMODE,
+ TPS6507X_TSCMODE_STANDBY);
+ if (ret)
+ return ret;
+
+ ret = tps6507x_read_u8(tsc, TPS6507X_REG_INT, &val);
+ if (ret)
+ return ret;
+
+ while (val & TPS6507X_REG_TSC_INT) {
+ mdelay(10);
+ ret = tps6507x_read_u8(tsc, TPS6507X_REG_INT, &val);
+ if (ret)
+ return ret;
+ loops++;
+ }
+
+ return ret;
+}
+
+static void tps6507x_ts_handler(struct work_struct *work)
+{
+ struct tps6507x_ts *tsc = container_of(work,
+ struct tps6507x_ts, work.work);
+ struct input_dev *input_dev = tsc->input_dev;
+ int pendown;
+ int schd;
+ int poll = 0;
+ s32 ret;
+
+ ret = tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_PRESSURE,
+ &tsc->tc.pressure);
+ if (ret)
+ goto done;
+
+ pendown = tsc->tc.pressure > tsc->min_pressure;
+
+ if (unlikely(!pendown && tsc->pendown)) {
+ dev_dbg(tsc->dev, "UP\n");
+ input_report_key(input_dev, BTN_TOUCH, 0);
+ input_report_abs(input_dev, ABS_PRESSURE, 0);
+ input_sync(input_dev);
+ tsc->pendown = 0;
+ }
+
+ if (pendown) {
+
+ if (!tsc->pendown) {
+ dev_dbg(tsc->dev, "DOWN\n");
+ input_report_key(input_dev, BTN_TOUCH, 1);
+ } else
+ dev_dbg(tsc->dev, "still down\n");
+
+ ret = tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_X_POSITION,
+ &tsc->tc.x);
+ if (ret)
+ goto done;
+
+ ret = tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_Y_POSITION,
+ &tsc->tc.y);
+ if (ret)
+ goto done;
+
+ input_report_abs(input_dev, ABS_X, tsc->tc.x);
+ input_report_abs(input_dev, ABS_Y, tsc->tc.y);
+ input_report_abs(input_dev, ABS_PRESSURE, tsc->tc.pressure);
+ input_sync(input_dev);
+ tsc->pendown = 1;
+ poll = 1;
+ }
+
+done:
+ /* always poll if not using interrupts */
+ poll = 1;
+
+ if (poll) {
+ schd = queue_delayed_work(tsc->wq, &tsc->work,
+ msecs_to_jiffies(tsc->poll_period));
+ if (schd)
+ tsc->polling = 1;
+ else {
+ tsc->polling = 0;
+ dev_err(tsc->dev, "re-schedule failed");
+ }
+ } else
+ tsc->polling = 0;
+
+ ret = tps6507x_adc_standby(tsc);
+}
+
+static int tps6507x_ts_probe(struct platform_device *pdev)
+{
+ int error;
+ struct tps6507x_ts *tsc;
+ struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
+ struct touchscreen_init_data *init_data;
+ struct input_dev *input_dev;
+ struct tps6507x_board *tps_board;
+ int schd;
+
+ /**
+ * tps_board points to pmic related constants
+ * coming from the board-evm file.
+ */
+
+ tps_board = (struct tps6507x_board *)tps6507x_dev->dev->platform_data;
+
+ if (!tps_board) {
+ dev_err(tps6507x_dev->dev,
+ "Could not find tps6507x platform data\n");
+ return -EIO;
+ }
+
+ /**
+ * init_data points to array of regulator_init structures
+ * coming from the board-evm file.
+ */
+
+ init_data = tps_board->tps6507x_ts_init_data;
+
+ tsc = kzalloc(sizeof(struct tps6507x_ts), GFP_KERNEL);
+ if (!tsc) {
+ dev_err(tps6507x_dev->dev, "failed to allocate driver data\n");
+ error = -ENOMEM;
+ goto err0;
+ }
+
+ tps6507x_dev->ts = tsc;
+ tsc->mfd = tps6507x_dev;
+ tsc->dev = tps6507x_dev->dev;
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ dev_err(tsc->dev, "Failed to allocate input device.\n");
+ error = -ENOMEM;
+ goto err1;
+ }
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+ input_set_abs_params(input_dev, ABS_X, 0, MAX_10BIT, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, MAX_10BIT, 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_10BIT, 0, 0);
+
+ input_dev->name = "TPS6507x Touchscreen";
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->dev.parent = tsc->dev;
+
+ snprintf(tsc->phys, sizeof(tsc->phys),
+ "%s/input0", dev_name(tsc->dev));
+ input_dev->phys = tsc->phys;
+
+ dev_dbg(tsc->dev, "device: %s\n", input_dev->phys);
+
+ input_set_drvdata(input_dev, tsc);
+
+ tsc->input_dev = input_dev;
+
+ INIT_DELAYED_WORK(&tsc->work, tps6507x_ts_handler);
+ tsc->wq = create_workqueue("TPS6507x Touchscreen");
+
+ if (init_data) {
+ tsc->poll_period = init_data->poll_period;
+ tsc->vref = init_data->vref;
+ tsc->min_pressure = init_data->min_pressure;
+ input_dev->id.vendor = init_data->vendor;
+ input_dev->id.product = init_data->product;
+ input_dev->id.version = init_data->version;
+ } else {
+ tsc->poll_period = TSC_DEFAULT_POLL_PERIOD;
+ tsc->min_pressure = TPS_DEFAULT_MIN_PRESSURE;
+ }
+
+ error = tps6507x_adc_standby(tsc);
+ if (error)
+ goto err2;
+
+ error = input_register_device(input_dev);
+ if (error)
+ goto err2;
+
+ schd = queue_delayed_work(tsc->wq, &tsc->work,
+ msecs_to_jiffies(tsc->poll_period));
+
+ if (schd)
+ tsc->polling = 1;
+ else {
+ tsc->polling = 0;
+ dev_err(tsc->dev, "schedule failed");
+ goto err2;
+ }
+
+ return 0;
+
+err2:
+ cancel_delayed_work_sync(&tsc->work);
+ destroy_workqueue(tsc->wq);
+ input_free_device(input_dev);
+err1:
+ kfree(tsc);
+ tps6507x_dev->ts = NULL;
+err0:
+ return error;
+}
+
+static int __devexit tps6507x_ts_remove(struct platform_device *pdev)
+{
+ struct tps6507x_dev *tps6507x_dev = platform_get_drvdata(pdev);
+ struct tps6507x_ts *tsc = tps6507x_dev->ts;
+ struct input_dev *input_dev = tsc->input_dev;
+
+ if (!tsc)
+ return 0;
+
+ cancel_delayed_work_sync(&tsc->work);
+ destroy_workqueue(tsc->wq);
+
+ input_free_device(input_dev);
+
+ tps6507x_dev->ts = NULL;
+ kfree(tsc);
+
+ return 0;
+}
+
+static struct platform_driver tps6507x_ts_driver = {
+ .driver = {
+ .name = "tps6507x-ts",
+ .owner = THIS_MODULE,
+ },
+ .probe = tps6507x_ts_probe,
+ .remove = __devexit_p(tps6507x_ts_remove),
+};
+
+static int __init tps6507x_ts_init(void)
+{
+ return platform_driver_register(&tps6507x_ts_driver);
+}
+module_init(tps6507x_ts_init);
+
+static void __exit tps6507x_ts_exit(void)
+{
+ platform_driver_unregister(&tps6507x_ts_driver);
+}
+module_exit(tps6507x_ts_exit);
+
+MODULE_AUTHOR("Todd Fischer <todd.fischer@ridgerun.com>");
+MODULE_DESCRIPTION("TPS6507x - TouchScreen driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:tps6507x-tsc");
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index 769b479..be23780 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -347,8 +347,6 @@
struct tsc2007 *ts = i2c_get_clientdata(client);
struct tsc2007_platform_data *pdata = client->dev.platform_data;
- i2c_set_clientdata(client, NULL);
-
tsc2007_free_irq(ts);
if (pdata->exit_platform_hw)
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 29a8bbf..567d572 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -857,6 +857,11 @@
if ((pkt[0] & 0xe0) != 0xe0)
return 0;
+ if (be16_to_cpu(packet->data_len) > 0xff)
+ packet->data_len = cpu_to_be16(be16_to_cpu(packet->data_len) - 0x100);
+ if (be16_to_cpu(packet->x_len) > 0xff)
+ packet->x_len = cpu_to_be16(be16_to_cpu(packet->x_len) - 0x80);
+
/* send ACK */
ret = usb_submit_urb(priv->ack, GFP_ATOMIC);
@@ -1112,7 +1117,7 @@
#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
[DEVTYPE_NEXIO] = {
- .rept_size = 128,
+ .rept_size = 1024,
.irq_always = true,
.read_data = nexio_read_data,
.init = nexio_init,
diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c
index cc18265..7a45d68 100644
--- a/drivers/input/touchscreen/w90p910_ts.c
+++ b/drivers/input/touchscreen/w90p910_ts.c
@@ -233,7 +233,7 @@
w90p910_ts->state = TS_IDLE;
spin_lock_init(&w90p910_ts->lock);
setup_timer(&w90p910_ts->timer, w90p910_check_pen_up,
- (unsigned long)&w90p910_ts);
+ (unsigned long)w90p910_ts);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
diff --git a/drivers/isdn/capi/kcapi.c b/drivers/isdn/capi/kcapi.c
index bde3c88..b054494 100644
--- a/drivers/isdn/capi/kcapi.c
+++ b/drivers/isdn/capi/kcapi.c
@@ -1020,12 +1020,12 @@
if (cmd == AVMB1_ADDCARD) {
if ((retval = copy_from_user(&cdef, data,
sizeof(avmb1_carddef))))
- return retval;
+ return -EFAULT;
cdef.cardtype = AVM_CARDTYPE_B1;
} else {
if ((retval = copy_from_user(&cdef, data,
sizeof(avmb1_extcarddef))))
- return retval;
+ return -EFAULT;
}
cparams.port = cdef.port;
cparams.irq = cdef.irq;
@@ -1218,7 +1218,7 @@
kcapi_carddef cdef;
if ((retval = copy_from_user(&cdef, data, sizeof(cdef))))
- return retval;
+ return -EFAULT;
cparams.port = cdef.port;
cparams.irq = cdef.irq;
diff --git a/drivers/isdn/gigaset/asyncdata.c b/drivers/isdn/gigaset/asyncdata.c
index c5016bd..c3b1dc3 100644
--- a/drivers/isdn/gigaset/asyncdata.c
+++ b/drivers/isdn/gigaset/asyncdata.c
@@ -126,26 +126,6 @@
return numbytes;
}
-/* set up next receive skb for data mode
- */
-static void new_rcv_skb(struct bc_state *bcs)
-{
- struct cardstate *cs = bcs->cs;
- unsigned short hw_hdr_len = cs->hw_hdr_len;
-
- if (bcs->ignore) {
- bcs->skb = NULL;
- return;
- }
-
- bcs->skb = dev_alloc_skb(SBUFSIZE + hw_hdr_len);
- if (bcs->skb == NULL) {
- dev_warn(cs->dev, "could not allocate new skb\n");
- return;
- }
- skb_reserve(bcs->skb, hw_hdr_len);
-}
-
/* process a block of received bytes in HDLC data mode
* (mstate != MS_LOCKED && !(inputstate & INS_command) && proto2 == L2_HDLC)
* Collect HDLC frames, undoing byte stuffing and watching for DLE escapes.
@@ -159,8 +139,8 @@
struct cardstate *cs = inbuf->cs;
struct bc_state *bcs = cs->bcs;
int inputstate = bcs->inputstate;
- __u16 fcs = bcs->fcs;
- struct sk_buff *skb = bcs->skb;
+ __u16 fcs = bcs->rx_fcs;
+ struct sk_buff *skb = bcs->rx_skb;
unsigned char *src = inbuf->data + inbuf->head;
unsigned procbytes = 0;
unsigned char c;
@@ -245,8 +225,7 @@
/* prepare reception of next frame */
inputstate &= ~INS_have_data;
- new_rcv_skb(bcs);
- skb = bcs->skb;
+ skb = gigaset_new_rx_skb(bcs);
} else {
/* empty frame (7E 7E) */
#ifdef CONFIG_GIGASET_DEBUG
@@ -255,8 +234,7 @@
if (!skb) {
/* skipped (?) */
gigaset_isdn_rcv_err(bcs);
- new_rcv_skb(bcs);
- skb = bcs->skb;
+ skb = gigaset_new_rx_skb(bcs);
}
}
@@ -279,11 +257,11 @@
#endif
inputstate |= INS_have_data;
if (skb) {
- if (skb->len == SBUFSIZE) {
+ if (skb->len >= bcs->rx_bufsize) {
dev_warn(cs->dev, "received packet too long\n");
dev_kfree_skb_any(skb);
/* skip remainder of packet */
- bcs->skb = skb = NULL;
+ bcs->rx_skb = skb = NULL;
} else {
*__skb_put(skb, 1) = c;
fcs = crc_ccitt_byte(fcs, c);
@@ -292,7 +270,7 @@
}
bcs->inputstate = inputstate;
- bcs->fcs = fcs;
+ bcs->rx_fcs = fcs;
return procbytes;
}
@@ -308,18 +286,18 @@
struct cardstate *cs = inbuf->cs;
struct bc_state *bcs = cs->bcs;
int inputstate = bcs->inputstate;
- struct sk_buff *skb = bcs->skb;
+ struct sk_buff *skb = bcs->rx_skb;
unsigned char *src = inbuf->data + inbuf->head;
unsigned procbytes = 0;
unsigned char c;
if (!skb) {
/* skip this block */
- new_rcv_skb(bcs);
+ gigaset_new_rx_skb(bcs);
return numbytes;
}
- while (procbytes < numbytes && skb->len < SBUFSIZE) {
+ while (procbytes < numbytes && skb->len < bcs->rx_bufsize) {
c = *src++;
procbytes++;
@@ -343,7 +321,7 @@
if (inputstate & INS_have_data) {
gigaset_skb_rcvd(bcs, skb);
inputstate &= ~INS_have_data;
- new_rcv_skb(bcs);
+ gigaset_new_rx_skb(bcs);
}
bcs->inputstate = inputstate;
diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c
index 8f78f15..6fbe899 100644
--- a/drivers/isdn/gigaset/capi.c
+++ b/drivers/isdn/gigaset/capi.c
@@ -70,7 +70,7 @@
#define MAX_NUMBER_DIGITS 20
#define MAX_FMT_IE_LEN 20
-/* values for gigaset_capi_appl.connected */
+/* values for bcs->apconnstate */
#define APCONN_NONE 0 /* inactive/listening */
#define APCONN_SETUP 1 /* connecting */
#define APCONN_ACTIVE 2 /* B channel up */
@@ -80,10 +80,10 @@
struct list_head ctrlist;
struct gigaset_capi_appl *bcnext;
u16 id;
+ struct capi_register_params rp;
u16 nextMessageNumber;
u32 listenInfoMask;
u32 listenCIPmask;
- int connected;
};
/* CAPI specific controller data structure */
@@ -319,6 +319,39 @@
return result;
}
+/*
+ * emit DATA_B3_CONF message
+ */
+static void send_data_b3_conf(struct cardstate *cs, struct capi_ctr *ctr,
+ u16 appl, u16 msgid, int channel,
+ u16 handle, u16 info)
+{
+ struct sk_buff *cskb;
+ u8 *msg;
+
+ cskb = alloc_skb(CAPI_DATA_B3_CONF_LEN, GFP_ATOMIC);
+ if (!cskb) {
+ dev_err(cs->dev, "%s: out of memory\n", __func__);
+ return;
+ }
+ /* frequent message, avoid _cmsg overhead */
+ msg = __skb_put(cskb, CAPI_DATA_B3_CONF_LEN);
+ CAPIMSG_SETLEN(msg, CAPI_DATA_B3_CONF_LEN);
+ CAPIMSG_SETAPPID(msg, appl);
+ CAPIMSG_SETCOMMAND(msg, CAPI_DATA_B3);
+ CAPIMSG_SETSUBCOMMAND(msg, CAPI_CONF);
+ CAPIMSG_SETMSGID(msg, msgid);
+ CAPIMSG_SETCONTROLLER(msg, ctr->cnr);
+ CAPIMSG_SETPLCI_PART(msg, channel);
+ CAPIMSG_SETNCCI_PART(msg, 1);
+ CAPIMSG_SETHANDLE_CONF(msg, handle);
+ CAPIMSG_SETINFO_CONF(msg, info);
+
+ /* emit message */
+ dump_rawmsg(DEBUG_MCMD, __func__, msg);
+ capi_ctr_handle_message(ctr, appl, cskb);
+}
+
/*
* driver interface functions
@@ -339,7 +372,6 @@
struct gigaset_capi_ctr *iif = cs->iif;
struct gigaset_capi_appl *ap = bcs->ap;
unsigned char *req = skb_mac_header(dskb);
- struct sk_buff *cskb;
u16 flags;
/* update statistics */
@@ -351,39 +383,22 @@
}
/* don't send further B3 messages if disconnected */
- if (ap->connected < APCONN_ACTIVE) {
+ if (bcs->apconnstate < APCONN_ACTIVE) {
gig_dbg(DEBUG_LLDATA, "disconnected, discarding ack");
return;
}
- /* ToDo: honor unset "delivery confirmation" bit */
+ /*
+ * send DATA_B3_CONF if "delivery confirmation" bit was set in request;
+ * otherwise it has already been sent by do_data_b3_req()
+ */
flags = CAPIMSG_FLAGS(req);
-
- /* build DATA_B3_CONF message */
- cskb = alloc_skb(CAPI_DATA_B3_CONF_LEN, GFP_ATOMIC);
- if (!cskb) {
- dev_err(cs->dev, "%s: out of memory\n", __func__);
- return;
- }
- /* frequent message, avoid _cmsg overhead */
- CAPIMSG_SETLEN(cskb->data, CAPI_DATA_B3_CONF_LEN);
- CAPIMSG_SETAPPID(cskb->data, ap->id);
- CAPIMSG_SETCOMMAND(cskb->data, CAPI_DATA_B3);
- CAPIMSG_SETSUBCOMMAND(cskb->data, CAPI_CONF);
- CAPIMSG_SETMSGID(cskb->data, CAPIMSG_MSGID(req));
- CAPIMSG_SETCONTROLLER(cskb->data, iif->ctr.cnr);
- CAPIMSG_SETPLCI_PART(cskb->data, bcs->channel + 1);
- CAPIMSG_SETNCCI_PART(cskb->data, 1);
- CAPIMSG_SETHANDLE_CONF(cskb->data, CAPIMSG_HANDLE_REQ(req));
- if (flags & ~CAPI_FLAGS_DELIVERY_CONFIRMATION)
- CAPIMSG_SETINFO_CONF(cskb->data,
- CapiFlagsNotSupportedByProtocol);
- else
- CAPIMSG_SETINFO_CONF(cskb->data, CAPI_NOERROR);
-
- /* emit message */
- dump_rawmsg(DEBUG_LLDATA, "DATA_B3_CONF", cskb->data);
- capi_ctr_handle_message(&iif->ctr, ap->id, cskb);
+ if (flags & CAPI_FLAGS_DELIVERY_CONFIRMATION)
+ send_data_b3_conf(cs, &iif->ctr, ap->id, CAPIMSG_MSGID(req),
+ bcs->channel + 1, CAPIMSG_HANDLE_REQ(req),
+ (flags & ~CAPI_FLAGS_DELIVERY_CONFIRMATION) ?
+ CapiFlagsNotSupportedByProtocol :
+ CAPI_NOERROR);
}
EXPORT_SYMBOL_GPL(gigaset_skb_sent);
@@ -412,7 +427,7 @@
}
/* don't send further B3 messages if disconnected */
- if (ap->connected < APCONN_ACTIVE) {
+ if (bcs->apconnstate < APCONN_ACTIVE) {
gig_dbg(DEBUG_LLDATA, "disconnected, discarding data");
dev_kfree_skb_any(skb);
return;
@@ -484,6 +499,7 @@
u32 actCIPmask;
struct sk_buff *skb;
unsigned int msgsize;
+ unsigned long flags;
int i;
/*
@@ -608,7 +624,14 @@
format_ie(iif->hcmsg.CalledPartyNumber));
/* scan application list for matching listeners */
- bcs->ap = NULL;
+ spin_lock_irqsave(&bcs->aplock, flags);
+ if (bcs->ap != NULL || bcs->apconnstate != APCONN_NONE) {
+ dev_warn(cs->dev, "%s: channel not properly cleared (%p/%d)\n",
+ __func__, bcs->ap, bcs->apconnstate);
+ bcs->ap = NULL;
+ bcs->apconnstate = APCONN_NONE;
+ }
+ spin_unlock_irqrestore(&bcs->aplock, flags);
actCIPmask = 1 | (1 << iif->hcmsg.CIPValue);
list_for_each_entry(ap, &iif->appls, ctrlist)
if (actCIPmask & ap->listenCIPmask) {
@@ -626,10 +649,12 @@
dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
/* add to listeners on this B channel, update state */
+ spin_lock_irqsave(&bcs->aplock, flags);
ap->bcnext = bcs->ap;
bcs->ap = ap;
bcs->chstate |= CHS_NOTIFY_LL;
- ap->connected = APCONN_SETUP;
+ bcs->apconnstate = APCONN_SETUP;
+ spin_unlock_irqrestore(&bcs->aplock, flags);
/* emit message */
capi_ctr_handle_message(&iif->ctr, ap->id, skb);
@@ -654,7 +679,7 @@
struct gigaset_capi_ctr *iif = cs->iif;
struct sk_buff *skb;
- if (ap->connected == APCONN_NONE)
+ if (bcs->apconnstate == APCONN_NONE)
return;
capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_DISCONNECT, CAPI_IND,
@@ -668,7 +693,6 @@
}
capi_cmsg2message(&iif->hcmsg, __skb_put(skb, CAPI_DISCONNECT_IND_LEN));
dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
- ap->connected = APCONN_NONE;
capi_ctr_handle_message(&iif->ctr, ap->id, skb);
}
@@ -685,9 +709,9 @@
struct sk_buff *skb;
/* nothing to do if no logical connection active */
- if (ap->connected < APCONN_ACTIVE)
+ if (bcs->apconnstate < APCONN_ACTIVE)
return;
- ap->connected = APCONN_SETUP;
+ bcs->apconnstate = APCONN_SETUP;
capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND,
ap->nextMessageNumber++,
@@ -714,14 +738,25 @@
{
struct cardstate *cs = bcs->cs;
struct gigaset_capi_ctr *iif = cs->iif;
- struct gigaset_capi_appl *ap = bcs->ap;
+ struct gigaset_capi_appl *ap;
struct sk_buff *skb;
unsigned int msgsize;
+ unsigned long flags;
+ spin_lock_irqsave(&bcs->aplock, flags);
+ ap = bcs->ap;
if (!ap) {
+ spin_unlock_irqrestore(&bcs->aplock, flags);
dev_err(cs->dev, "%s: no application\n", __func__);
return;
}
+ if (bcs->apconnstate == APCONN_NONE) {
+ spin_unlock_irqrestore(&bcs->aplock, flags);
+ dev_warn(cs->dev, "%s: application %u not connected\n",
+ __func__, ap->id);
+ return;
+ }
+ spin_unlock_irqrestore(&bcs->aplock, flags);
while (ap->bcnext) {
/* this should never happen */
dev_warn(cs->dev, "%s: dropping extra application %u\n",
@@ -730,11 +765,6 @@
CapiCallGivenToOtherApplication);
ap->bcnext = ap->bcnext->bcnext;
}
- if (ap->connected == APCONN_NONE) {
- dev_warn(cs->dev, "%s: application %u not connected\n",
- __func__, ap->id);
- return;
- }
/* prepare CONNECT_ACTIVE_IND message
* Note: LLC not supported by device
@@ -772,17 +802,24 @@
void gigaset_isdn_hupD(struct bc_state *bcs)
{
struct gigaset_capi_appl *ap;
+ unsigned long flags;
/*
* ToDo: pass on reason code reported by device
* (requires ev-layer state machine extension to collect
* ZCAU device reply)
*/
- for (ap = bcs->ap; ap != NULL; ap = ap->bcnext) {
+ spin_lock_irqsave(&bcs->aplock, flags);
+ while (bcs->ap != NULL) {
+ ap = bcs->ap;
+ bcs->ap = ap->bcnext;
+ spin_unlock_irqrestore(&bcs->aplock, flags);
send_disconnect_b3_ind(bcs, ap);
send_disconnect_ind(bcs, ap, 0);
+ spin_lock_irqsave(&bcs->aplock, flags);
}
- bcs->ap = NULL;
+ bcs->apconnstate = APCONN_NONE;
+ spin_unlock_irqrestore(&bcs->aplock, flags);
}
/**
@@ -796,24 +833,21 @@
{
struct cardstate *cs = bcs->cs;
struct gigaset_capi_ctr *iif = cs->iif;
- struct gigaset_capi_appl *ap = bcs->ap;
+ struct gigaset_capi_appl *ap;
struct sk_buff *skb;
+ unsigned long flags;
unsigned int msgsize;
u8 command;
+ spin_lock_irqsave(&bcs->aplock, flags);
+ ap = bcs->ap;
if (!ap) {
+ spin_unlock_irqrestore(&bcs->aplock, flags);
dev_err(cs->dev, "%s: no application\n", __func__);
return;
}
- while (ap->bcnext) {
- /* this should never happen */
- dev_warn(cs->dev, "%s: dropping extra application %u\n",
- __func__, ap->bcnext->id);
- send_disconnect_ind(bcs, ap->bcnext,
- CapiCallGivenToOtherApplication);
- ap->bcnext = ap->bcnext->bcnext;
- }
- if (!ap->connected) {
+ if (!bcs->apconnstate) {
+ spin_unlock_irqrestore(&bcs->aplock, flags);
dev_warn(cs->dev, "%s: application %u not connected\n",
__func__, ap->id);
return;
@@ -825,13 +859,26 @@
* CONNECT_B3_ACTIVE_IND in reply to CONNECT_B3_RESP
* Parameters in both cases always: NCCI = 1, NCPI empty
*/
- if (ap->connected >= APCONN_ACTIVE) {
+ if (bcs->apconnstate >= APCONN_ACTIVE) {
command = CAPI_CONNECT_B3_ACTIVE;
msgsize = CAPI_CONNECT_B3_ACTIVE_IND_BASELEN;
} else {
command = CAPI_CONNECT_B3;
msgsize = CAPI_CONNECT_B3_IND_BASELEN;
}
+ bcs->apconnstate = APCONN_ACTIVE;
+
+ spin_unlock_irqrestore(&bcs->aplock, flags);
+
+ while (ap->bcnext) {
+ /* this should never happen */
+ dev_warn(cs->dev, "%s: dropping extra application %u\n",
+ __func__, ap->bcnext->id);
+ send_disconnect_ind(bcs, ap->bcnext,
+ CapiCallGivenToOtherApplication);
+ ap->bcnext = ap->bcnext->bcnext;
+ }
+
capi_cmsg_header(&iif->hcmsg, ap->id, command, CAPI_IND,
ap->nextMessageNumber++,
iif->ctr.cnr | ((bcs->channel + 1) << 8) | (1 << 16));
@@ -842,7 +889,6 @@
}
capi_cmsg2message(&iif->hcmsg, __skb_put(skb, msgsize));
dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
- ap->connected = APCONN_ACTIVE;
capi_ctr_handle_message(&iif->ctr, ap->id, skb);
}
@@ -945,8 +991,64 @@
return;
}
ap->id = appl;
+ ap->rp = *rp;
list_add(&ap->ctrlist, &iif->appls);
+ dev_info(cs->dev, "application %u registered\n", ap->id);
+}
+
+/*
+ * remove CAPI application from channel
+ * helper function to keep indentation levels down and stay in 80 columns
+ */
+
+static inline void remove_appl_from_channel(struct bc_state *bcs,
+ struct gigaset_capi_appl *ap)
+{
+ struct cardstate *cs = bcs->cs;
+ struct gigaset_capi_appl *bcap;
+ unsigned long flags;
+ int prevconnstate;
+
+ spin_lock_irqsave(&bcs->aplock, flags);
+ bcap = bcs->ap;
+ if (bcap == NULL) {
+ spin_unlock_irqrestore(&bcs->aplock, flags);
+ return;
+ }
+
+ /* check first application on channel */
+ if (bcap == ap) {
+ bcs->ap = ap->bcnext;
+ if (bcs->ap != NULL) {
+ spin_unlock_irqrestore(&bcs->aplock, flags);
+ return;
+ }
+
+ /* none left, clear channel state */
+ prevconnstate = bcs->apconnstate;
+ bcs->apconnstate = APCONN_NONE;
+ spin_unlock_irqrestore(&bcs->aplock, flags);
+
+ if (prevconnstate == APCONN_ACTIVE) {
+ dev_notice(cs->dev, "%s: hanging up channel %u\n",
+ __func__, bcs->channel);
+ gigaset_add_event(cs, &bcs->at_state,
+ EV_HUP, NULL, 0, NULL);
+ gigaset_schedule_event(cs);
+ }
+ return;
+ }
+
+ /* check remaining list */
+ do {
+ if (bcap->bcnext == ap) {
+ bcap->bcnext = bcap->bcnext->bcnext;
+ return;
+ }
+ bcap = bcap->bcnext;
+ } while (bcap != NULL);
+ spin_unlock_irqrestore(&bcs->aplock, flags);
}
/*
@@ -958,19 +1060,19 @@
= container_of(ctr, struct gigaset_capi_ctr, ctr);
struct cardstate *cs = iif->ctr.driverdata;
struct gigaset_capi_appl *ap, *tmp;
+ unsigned ch;
list_for_each_entry_safe(ap, tmp, &iif->appls, ctrlist)
if (ap->id == appl) {
- if (ap->connected != APCONN_NONE) {
- dev_err(cs->dev,
- "%s: application %u still connected\n",
- __func__, ap->id);
- /* ToDo: clear active connection */
- }
+ /* remove from any channels */
+ for (ch = 0; ch < cs->channels; ch++)
+ remove_appl_from_channel(&cs->bcs[ch], ap);
+
+ /* remove from registration list */
list_del(&ap->ctrlist);
kfree(ap);
+ dev_info(cs->dev, "application %u released\n", appl);
}
-
}
/*
@@ -1149,7 +1251,8 @@
char **commands;
char *s;
u8 *pp;
- int i, l;
+ unsigned long flags;
+ int i, l, lbc, lhlc;
u16 info;
/* decode message */
@@ -1164,8 +1267,18 @@
send_conf(iif, ap, skb, CapiNoPlciAvailable);
return;
}
+ spin_lock_irqsave(&bcs->aplock, flags);
+ if (bcs->ap != NULL || bcs->apconnstate != APCONN_NONE)
+ dev_warn(cs->dev, "%s: channel not properly cleared (%p/%d)\n",
+ __func__, bcs->ap, bcs->apconnstate);
ap->bcnext = NULL;
bcs->ap = ap;
+ bcs->apconnstate = APCONN_SETUP;
+ spin_unlock_irqrestore(&bcs->aplock, flags);
+
+ bcs->rx_bufsize = ap->rp.datablklen;
+ dev_kfree_skb(bcs->rx_skb);
+ gigaset_new_rx_skb(bcs);
cmsg->adr.adrPLCI |= (bcs->channel + 1) << 8;
/* build command table */
@@ -1273,42 +1386,59 @@
goto error;
}
- /* check/encode parameter: BC */
- if (cmsg->BC && cmsg->BC[0]) {
- /* explicit BC overrides CIP */
- l = 2*cmsg->BC[0] + 7;
+ /*
+ * check/encode parameters: BC & HLC
+ * must be encoded together as device doesn't accept HLC separately
+ * explicit parameters override values derived from CIP
+ */
+
+ /* determine lengths */
+ if (cmsg->BC && cmsg->BC[0]) /* BC specified explicitly */
+ lbc = 2*cmsg->BC[0];
+ else if (cip2bchlc[cmsg->CIPValue].bc) /* BC derived from CIP */
+ lbc = strlen(cip2bchlc[cmsg->CIPValue].bc);
+ else /* no BC */
+ lbc = 0;
+ if (cmsg->HLC && cmsg->HLC[0]) /* HLC specified explicitly */
+ lhlc = 2*cmsg->HLC[0];
+ else if (cip2bchlc[cmsg->CIPValue].hlc) /* HLC derived from CIP */
+ lhlc = strlen(cip2bchlc[cmsg->CIPValue].hlc);
+ else /* no HLC */
+ lhlc = 0;
+
+ if (lbc) {
+ /* have BC: allocate and assemble command string */
+ l = lbc + 7; /* "^SBC=" + value + "\r" + null byte */
+ if (lhlc)
+ l += lhlc + 7; /* ";^SHLC=" + value */
commands[AT_BC] = kmalloc(l, GFP_KERNEL);
if (!commands[AT_BC])
goto oom;
strcpy(commands[AT_BC], "^SBC=");
- decode_ie(cmsg->BC, commands[AT_BC]+5);
+ if (cmsg->BC && cmsg->BC[0]) /* BC specified explicitly */
+ decode_ie(cmsg->BC, commands[AT_BC] + 5);
+ else /* BC derived from CIP */
+ strcpy(commands[AT_BC] + 5,
+ cip2bchlc[cmsg->CIPValue].bc);
+ if (lhlc) {
+ strcpy(commands[AT_BC] + lbc + 5, ";^SHLC=");
+ if (cmsg->HLC && cmsg->HLC[0])
+ /* HLC specified explicitly */
+ decode_ie(cmsg->HLC,
+ commands[AT_BC] + lbc + 12);
+ else /* HLC derived from CIP */
+ strcpy(commands[AT_BC] + lbc + 12,
+ cip2bchlc[cmsg->CIPValue].hlc);
+ }
strcpy(commands[AT_BC] + l - 2, "\r");
- } else if (cip2bchlc[cmsg->CIPValue].bc) {
- l = strlen(cip2bchlc[cmsg->CIPValue].bc) + 7;
- commands[AT_BC] = kmalloc(l, GFP_KERNEL);
- if (!commands[AT_BC])
- goto oom;
- snprintf(commands[AT_BC], l, "^SBC=%s\r",
- cip2bchlc[cmsg->CIPValue].bc);
- }
-
- /* check/encode parameter: HLC */
- if (cmsg->HLC && cmsg->HLC[0]) {
- /* explicit HLC overrides CIP */
- l = 2*cmsg->HLC[0] + 7;
- commands[AT_HLC] = kmalloc(l, GFP_KERNEL);
- if (!commands[AT_HLC])
- goto oom;
- strcpy(commands[AT_HLC], "^SHLC=");
- decode_ie(cmsg->HLC, commands[AT_HLC]+5);
- strcpy(commands[AT_HLC] + l - 2, "\r");
- } else if (cip2bchlc[cmsg->CIPValue].hlc) {
- l = strlen(cip2bchlc[cmsg->CIPValue].hlc) + 7;
- commands[AT_HLC] = kmalloc(l, GFP_KERNEL);
- if (!commands[AT_HLC])
- goto oom;
- snprintf(commands[AT_HLC], l, "^SHLC=%s\r",
- cip2bchlc[cmsg->CIPValue].hlc);
+ } else {
+ /* no BC */
+ if (lhlc) {
+ dev_notice(cs->dev, "%s: cannot set HLC without BC\n",
+ "CONNECT_REQ");
+ info = CapiIllMessageParmCoding; /* ? */
+ goto error;
+ }
}
/* check/encode parameter: B Protocol */
@@ -1322,13 +1452,13 @@
bcs->proto2 = L2_HDLC;
break;
case 1:
- bcs->proto2 = L2_BITSYNC;
+ bcs->proto2 = L2_VOICE;
break;
default:
dev_warn(cs->dev,
"B1 Protocol %u unsupported, using Transparent\n",
cmsg->B1protocol);
- bcs->proto2 = L2_BITSYNC;
+ bcs->proto2 = L2_VOICE;
}
if (cmsg->B2protocol != 1)
dev_warn(cs->dev,
@@ -1382,7 +1512,6 @@
goto error;
}
gigaset_schedule_event(cs);
- ap->connected = APCONN_SETUP;
send_conf(iif, ap, skb, CapiSuccess);
return;
@@ -1410,6 +1539,7 @@
_cmsg *cmsg = &iif->acmsg;
struct bc_state *bcs;
struct gigaset_capi_appl *oap;
+ unsigned long flags;
int channel;
/* decode message */
@@ -1429,12 +1559,24 @@
switch (cmsg->Reject) {
case 0: /* Accept */
/* drop all competing applications, keep only this one */
- for (oap = bcs->ap; oap != NULL; oap = oap->bcnext)
- if (oap != ap)
+ spin_lock_irqsave(&bcs->aplock, flags);
+ while (bcs->ap != NULL) {
+ oap = bcs->ap;
+ bcs->ap = oap->bcnext;
+ if (oap != ap) {
+ spin_unlock_irqrestore(&bcs->aplock, flags);
send_disconnect_ind(bcs, oap,
CapiCallGivenToOtherApplication);
+ spin_lock_irqsave(&bcs->aplock, flags);
+ }
+ }
ap->bcnext = NULL;
bcs->ap = ap;
+ spin_unlock_irqrestore(&bcs->aplock, flags);
+
+ bcs->rx_bufsize = ap->rp.datablklen;
+ dev_kfree_skb(bcs->rx_skb);
+ gigaset_new_rx_skb(bcs);
bcs->chstate |= CHS_NOTIFY_LL;
/* check/encode B channel protocol */
@@ -1448,13 +1590,13 @@
bcs->proto2 = L2_HDLC;
break;
case 1:
- bcs->proto2 = L2_BITSYNC;
+ bcs->proto2 = L2_VOICE;
break;
default:
dev_warn(cs->dev,
"B1 Protocol %u unsupported, using Transparent\n",
cmsg->B1protocol);
- bcs->proto2 = L2_BITSYNC;
+ bcs->proto2 = L2_VOICE;
}
if (cmsg->B2protocol != 1)
dev_warn(cs->dev,
@@ -1502,31 +1644,45 @@
send_disconnect_ind(bcs, ap, 0);
/* remove it from the list of listening apps */
+ spin_lock_irqsave(&bcs->aplock, flags);
if (bcs->ap == ap) {
bcs->ap = ap->bcnext;
- if (bcs->ap == NULL)
+ if (bcs->ap == NULL) {
/* last one: stop ev-layer hupD notifications */
+ bcs->apconnstate = APCONN_NONE;
bcs->chstate &= ~CHS_NOTIFY_LL;
+ }
+ spin_unlock_irqrestore(&bcs->aplock, flags);
return;
}
for (oap = bcs->ap; oap != NULL; oap = oap->bcnext) {
if (oap->bcnext == ap) {
oap->bcnext = oap->bcnext->bcnext;
+ spin_unlock_irqrestore(&bcs->aplock, flags);
return;
}
}
+ spin_unlock_irqrestore(&bcs->aplock, flags);
dev_err(cs->dev, "%s: application %u not found\n",
__func__, ap->id);
return;
default: /* Reject */
/* drop all competing applications, keep only this one */
- for (oap = bcs->ap; oap != NULL; oap = oap->bcnext)
- if (oap != ap)
+ spin_lock_irqsave(&bcs->aplock, flags);
+ while (bcs->ap != NULL) {
+ oap = bcs->ap;
+ bcs->ap = oap->bcnext;
+ if (oap != ap) {
+ spin_unlock_irqrestore(&bcs->aplock, flags);
send_disconnect_ind(bcs, oap,
CapiCallGivenToOtherApplication);
+ spin_lock_irqsave(&bcs->aplock, flags);
+ }
+ }
ap->bcnext = NULL;
bcs->ap = ap;
+ spin_unlock_irqrestore(&bcs->aplock, flags);
/* reject call - will trigger DISCONNECT_IND for this app */
dev_info(cs->dev, "%s: Reject=%x\n",
@@ -1549,6 +1705,7 @@
{
struct cardstate *cs = iif->ctr.driverdata;
_cmsg *cmsg = &iif->acmsg;
+ struct bc_state *bcs;
int channel;
/* decode message */
@@ -1563,9 +1720,10 @@
send_conf(iif, ap, skb, CapiIllContrPlciNcci);
return;
}
+ bcs = &cs->bcs[channel-1];
/* mark logical connection active */
- ap->connected = APCONN_ACTIVE;
+ bcs->apconnstate = APCONN_ACTIVE;
/* build NCCI: always 1 (one B3 connection only) */
cmsg->adr.adrNCCI |= 1 << 16;
@@ -1611,7 +1769,7 @@
if (cmsg->Reject) {
/* Reject: clear B3 connect received flag */
- ap->connected = APCONN_SETUP;
+ bcs->apconnstate = APCONN_SETUP;
/* trigger hangup, causing eventual DISCONNECT_IND */
if (!gigaset_add_event(cs, &bcs->at_state,
@@ -1683,11 +1841,11 @@
}
/* skip if DISCONNECT_IND already sent */
- if (!ap->connected)
+ if (!bcs->apconnstate)
return;
/* check for active logical connection */
- if (ap->connected >= APCONN_ACTIVE) {
+ if (bcs->apconnstate >= APCONN_ACTIVE) {
/*
* emit DISCONNECT_B3_IND with cause 0x3301
* use separate cmsg structure, as the content of iif->acmsg
@@ -1736,6 +1894,7 @@
{
struct cardstate *cs = iif->ctr.driverdata;
_cmsg *cmsg = &iif->acmsg;
+ struct bc_state *bcs;
int channel;
/* decode message */
@@ -1751,17 +1910,17 @@
send_conf(iif, ap, skb, CapiIllContrPlciNcci);
return;
}
+ bcs = &cs->bcs[channel-1];
/* reject if logical connection not active */
- if (ap->connected < APCONN_ACTIVE) {
+ if (bcs->apconnstate < APCONN_ACTIVE) {
send_conf(iif, ap, skb,
CapiMessageNotSupportedInCurrentState);
return;
}
/* trigger hangup, causing eventual DISCONNECT_B3_IND */
- if (!gigaset_add_event(cs, &cs->bcs[channel-1].at_state,
- EV_HUP, NULL, 0, NULL)) {
+ if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL)) {
send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
return;
}
@@ -1782,11 +1941,14 @@
struct sk_buff *skb)
{
struct cardstate *cs = iif->ctr.driverdata;
+ struct bc_state *bcs;
int channel = CAPIMSG_PLCI_PART(skb->data);
u16 ncci = CAPIMSG_NCCI_PART(skb->data);
u16 msglen = CAPIMSG_LEN(skb->data);
u16 datalen = CAPIMSG_DATALEN(skb->data);
u16 flags = CAPIMSG_FLAGS(skb->data);
+ u16 msgid = CAPIMSG_MSGID(skb->data);
+ u16 handle = CAPIMSG_HANDLE_REQ(skb->data);
/* frequent message, avoid _cmsg overhead */
dump_rawmsg(DEBUG_LLDATA, "DATA_B3_REQ", skb->data);
@@ -1802,6 +1964,7 @@
send_conf(iif, ap, skb, CapiIllContrPlciNcci);
return;
}
+ bcs = &cs->bcs[channel-1];
if (msglen != CAPI_DATA_B3_REQ_LEN && msglen != CAPI_DATA_B3_REQ_LEN64)
dev_notice(cs->dev, "%s: unexpected length %d\n",
"DATA_B3_REQ", msglen);
@@ -1821,7 +1984,7 @@
}
/* reject if logical connection not active */
- if (ap->connected < APCONN_ACTIVE) {
+ if (bcs->apconnstate < APCONN_ACTIVE) {
send_conf(iif, ap, skb, CapiMessageNotSupportedInCurrentState);
return;
}
@@ -1832,17 +1995,19 @@
skb_pull(skb, msglen);
/* pass to device-specific module */
- if (cs->ops->send_skb(&cs->bcs[channel-1], skb) < 0) {
+ if (cs->ops->send_skb(bcs, skb) < 0) {
send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
return;
}
- /* DATA_B3_CONF reply will be sent by gigaset_skb_sent() */
-
/*
- * ToDo: honor unset "delivery confirmation" bit
- * (send DATA_B3_CONF immediately?)
+ * DATA_B3_CONF will be sent by gigaset_skb_sent() only if "delivery
+ * confirmation" bit is set; otherwise we have to send it now
*/
+ if (!(flags & CAPI_FLAGS_DELIVERY_CONFIRMATION))
+ send_data_b3_conf(cs, &iif->ctr, ap->id, msgid, channel, handle,
+ flags ? CapiFlagsNotSupportedByProtocol
+ : CAPI_NOERROR);
}
/*
diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c
index f6f45f2..5d4befb 100644
--- a/drivers/isdn/gigaset/common.c
+++ b/drivers/isdn/gigaset/common.c
@@ -399,8 +399,8 @@
gig_dbg(DEBUG_INIT, "clearing bcs[%d]->at_state", bcs->channel);
clear_at_state(&bcs->at_state);
gig_dbg(DEBUG_INIT, "freeing bcs[%d]->skb", bcs->channel);
- dev_kfree_skb(bcs->skb);
- bcs->skb = NULL;
+ dev_kfree_skb(bcs->rx_skb);
+ bcs->rx_skb = NULL;
for (i = 0; i < AT_NUM; ++i) {
kfree(bcs->commands[i]);
@@ -634,19 +634,10 @@
bcs->emptycount = 0;
#endif
- gig_dbg(DEBUG_INIT, "allocating bcs[%d]->skb", channel);
- bcs->fcs = PPP_INITFCS;
+ bcs->rx_bufsize = 0;
+ bcs->rx_skb = NULL;
+ bcs->rx_fcs = PPP_INITFCS;
bcs->inputstate = 0;
- if (cs->ignoreframes) {
- bcs->skb = NULL;
- } else {
- bcs->skb = dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
- if (bcs->skb != NULL)
- skb_reserve(bcs->skb, cs->hw_hdr_len);
- else
- pr_err("out of memory\n");
- }
-
bcs->channel = channel;
bcs->cs = cs;
@@ -658,16 +649,15 @@
for (i = 0; i < AT_NUM; ++i)
bcs->commands[i] = NULL;
+ spin_lock_init(&bcs->aplock);
+ bcs->ap = NULL;
+ bcs->apconnstate = 0;
+
gig_dbg(DEBUG_INIT, " setting up bcs[%d]->hw", channel);
if (cs->ops->initbcshw(bcs))
return bcs;
gig_dbg(DEBUG_INIT, " failed");
-
- gig_dbg(DEBUG_INIT, " freeing bcs[%d]->skb", channel);
- dev_kfree_skb(bcs->skb);
- bcs->skb = NULL;
-
return NULL;
}
@@ -839,14 +829,12 @@
bcs->emptycount = 0;
#endif
- bcs->fcs = PPP_INITFCS;
+ bcs->rx_fcs = PPP_INITFCS;
bcs->chstate = 0;
bcs->ignore = cs->ignoreframes;
- if (bcs->ignore) {
- dev_kfree_skb(bcs->skb);
- bcs->skb = NULL;
- }
+ dev_kfree_skb(bcs->rx_skb);
+ bcs->rx_skb = NULL;
cs->ops->reinitbcshw(bcs);
}
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index 206c380..ceaef9a 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -282,9 +282,7 @@
/* dial */
{EV_DIAL, -1, -1, -1, -1, -1, {ACT_DIAL} },
{RSP_INIT, 0, 0, SEQ_DIAL, 601, 5, {ACT_CMD+AT_BC} },
-{RSP_OK, 601, 601, -1, 602, 5, {ACT_CMD+AT_HLC} },
-{RSP_NULL, 602, 602, -1, 603, 5, {ACT_CMD+AT_PROTO} },
-{RSP_OK, 602, 602, -1, 603, 5, {ACT_CMD+AT_PROTO} },
+{RSP_OK, 601, 601, -1, 603, 5, {ACT_CMD+AT_PROTO} },
{RSP_OK, 603, 603, -1, 604, 5, {ACT_CMD+AT_TYPE} },
{RSP_OK, 604, 604, -1, 605, 5, {ACT_CMD+AT_MSN} },
{RSP_NULL, 605, 605, -1, 606, 5, {ACT_CMD+AT_CLIP} },
diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h
index 05947f9..8738b08 100644
--- a/drivers/isdn/gigaset/gigaset.h
+++ b/drivers/isdn/gigaset/gigaset.h
@@ -45,10 +45,6 @@
#define MAX_EVENTS 64 /* size of event queue */
#define RBUFSIZE 8192
-#define SBUFSIZE 4096 /* sk_buff payload size */
-
-#define TRANSBUFSIZE 768 /* bytes per skb for transparent receive */
-#define MAX_BUF_SIZE (SBUFSIZE - 2) /* Max. size of a data packet from LL */
/* compile time options */
#define GIG_MAJOR 0
@@ -190,10 +186,9 @@
#define AT_BC 3
#define AT_PROTO 4
#define AT_TYPE 5
-#define AT_HLC 6
-#define AT_CLIP 7
+#define AT_CLIP 6
/* total number */
-#define AT_NUM 8
+#define AT_NUM 7
/* variables in struct at_state_t */
#define VAR_ZSAU 0
@@ -380,8 +375,10 @@
struct at_state_t at_state;
- __u16 fcs;
- struct sk_buff *skb;
+ /* receive buffer */
+ unsigned rx_bufsize; /* max size accepted by application */
+ struct sk_buff *rx_skb;
+ __u16 rx_fcs;
int inputstate; /* see INS_XXXX */
int channel;
@@ -406,7 +403,9 @@
struct bas_bc_state *bas; /* usb hardware driver (base) */
} hw;
- void *ap; /* LL application structure */
+ void *ap; /* associated LL application */
+ int apconnstate; /* LL application connection state */
+ spinlock_t aplock;
};
struct cardstate {
@@ -801,8 +800,23 @@
gigaset_schedule_event(bcs->cs);
}
-/* handling routines for sk_buff */
-/* ============================= */
+/* set up next receive skb for data mode */
+static inline struct sk_buff *gigaset_new_rx_skb(struct bc_state *bcs)
+{
+ struct cardstate *cs = bcs->cs;
+ unsigned short hw_hdr_len = cs->hw_hdr_len;
+
+ if (bcs->ignore) {
+ bcs->rx_skb = NULL;
+ } else {
+ bcs->rx_skb = dev_alloc_skb(bcs->rx_bufsize + hw_hdr_len);
+ if (bcs->rx_skb == NULL)
+ dev_warn(cs->dev, "could not allocate skb\n");
+ else
+ skb_reserve(bcs->rx_skb, hw_hdr_len);
+ }
+ return bcs->rx_skb;
+}
/* append received bytes to inbuf */
int gigaset_fill_inbuf(struct inbuf_t *inbuf, const unsigned char *src,
diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c
index c22e5ac..f01c3c2 100644
--- a/drivers/isdn/gigaset/i4l.c
+++ b/drivers/isdn/gigaset/i4l.c
@@ -16,7 +16,10 @@
#include "gigaset.h"
#include <linux/isdnif.h>
+#define SBUFSIZE 4096 /* sk_buff payload size */
+#define TRANSBUFSIZE 768 /* bytes per skb for transparent receive */
#define HW_HDR_LEN 2 /* Header size used to store ack info */
+#define MAX_BUF_SIZE (SBUFSIZE - HW_HDR_LEN) /* max data packet from LL */
/* == Handling of I4L IO =====================================================*/
@@ -231,6 +234,15 @@
dev_err(cs->dev, "ISDN_CMD_DIAL: channel not free\n");
return -EBUSY;
}
+ switch (bcs->proto2) {
+ case L2_HDLC:
+ bcs->rx_bufsize = SBUFSIZE;
+ break;
+ default: /* assume transparent */
+ bcs->rx_bufsize = TRANSBUFSIZE;
+ }
+ dev_kfree_skb(bcs->rx_skb);
+ gigaset_new_rx_skb(bcs);
commands = kzalloc(AT_NUM*(sizeof *commands), GFP_ATOMIC);
if (!commands) {
@@ -314,6 +326,15 @@
return -EINVAL;
}
bcs = cs->bcs + ch;
+ switch (bcs->proto2) {
+ case L2_HDLC:
+ bcs->rx_bufsize = SBUFSIZE;
+ break;
+ default: /* assume transparent */
+ bcs->rx_bufsize = TRANSBUFSIZE;
+ }
+ dev_kfree_skb(bcs->rx_skb);
+ gigaset_new_rx_skb(bcs);
if (!gigaset_add_event(cs, &bcs->at_state,
EV_ACCEPT, NULL, 0, NULL))
return -ENOMEM;
diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index 16fd3bd..2dfd346 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -500,19 +500,18 @@
*/
static inline void hdlc_putbyte(unsigned char c, struct bc_state *bcs)
{
- bcs->fcs = crc_ccitt_byte(bcs->fcs, c);
- if (unlikely(bcs->skb == NULL)) {
+ bcs->rx_fcs = crc_ccitt_byte(bcs->rx_fcs, c);
+ if (bcs->rx_skb == NULL)
/* skipping */
return;
- }
- if (unlikely(bcs->skb->len == SBUFSIZE)) {
+ if (bcs->rx_skb->len >= bcs->rx_bufsize) {
dev_warn(bcs->cs->dev, "received oversized packet discarded\n");
bcs->hw.bas->giants++;
- dev_kfree_skb_any(bcs->skb);
- bcs->skb = NULL;
+ dev_kfree_skb_any(bcs->rx_skb);
+ bcs->rx_skb = NULL;
return;
}
- *__skb_put(bcs->skb, 1) = c;
+ *__skb_put(bcs->rx_skb, 1) = c;
}
/* hdlc_flush
@@ -521,18 +520,13 @@
static inline void hdlc_flush(struct bc_state *bcs)
{
/* clear skb or allocate new if not skipping */
- if (likely(bcs->skb != NULL))
- skb_trim(bcs->skb, 0);
- else if (!bcs->ignore) {
- bcs->skb = dev_alloc_skb(SBUFSIZE + bcs->cs->hw_hdr_len);
- if (bcs->skb)
- skb_reserve(bcs->skb, bcs->cs->hw_hdr_len);
- else
- dev_err(bcs->cs->dev, "could not allocate skb\n");
- }
+ if (bcs->rx_skb != NULL)
+ skb_trim(bcs->rx_skb, 0);
+ else
+ gigaset_new_rx_skb(bcs);
/* reset packet state */
- bcs->fcs = PPP_INITFCS;
+ bcs->rx_fcs = PPP_INITFCS;
}
/* hdlc_done
@@ -549,7 +543,7 @@
hdlc_flush(bcs);
return;
}
- procskb = bcs->skb;
+ procskb = bcs->rx_skb;
if (procskb == NULL) {
/* previous error */
gig_dbg(DEBUG_ISO, "%s: skb=NULL", __func__);
@@ -560,8 +554,8 @@
bcs->hw.bas->runts++;
dev_kfree_skb_any(procskb);
gigaset_isdn_rcv_err(bcs);
- } else if (bcs->fcs != PPP_GOODFCS) {
- dev_notice(cs->dev, "frame check error (0x%04x)\n", bcs->fcs);
+ } else if (bcs->rx_fcs != PPP_GOODFCS) {
+ dev_notice(cs->dev, "frame check error\n");
bcs->hw.bas->fcserrs++;
dev_kfree_skb_any(procskb);
gigaset_isdn_rcv_err(bcs);
@@ -574,13 +568,8 @@
bcs->hw.bas->goodbytes += len;
gigaset_skb_rcvd(bcs, procskb);
}
-
- bcs->skb = dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
- if (bcs->skb)
- skb_reserve(bcs->skb, cs->hw_hdr_len);
- else
- dev_err(cs->dev, "could not allocate skb\n");
- bcs->fcs = PPP_INITFCS;
+ gigaset_new_rx_skb(bcs);
+ bcs->rx_fcs = PPP_INITFCS;
}
/* hdlc_frag
@@ -597,8 +586,8 @@
dev_notice(bcs->cs->dev, "received partial byte (%d bits)\n", inbits);
bcs->hw.bas->alignerrs++;
gigaset_isdn_rcv_err(bcs);
- __skb_trim(bcs->skb, 0);
- bcs->fcs = PPP_INITFCS;
+ __skb_trim(bcs->rx_skb, 0);
+ bcs->rx_fcs = PPP_INITFCS;
}
/* bit counts lookup table for HDLC bit unstuffing
@@ -847,7 +836,6 @@
static inline void trans_receive(unsigned char *src, unsigned count,
struct bc_state *bcs)
{
- struct cardstate *cs = bcs->cs;
struct sk_buff *skb;
int dobytes;
unsigned char *dst;
@@ -857,17 +845,11 @@
hdlc_flush(bcs);
return;
}
- skb = bcs->skb;
- if (unlikely(skb == NULL)) {
- bcs->skb = skb = dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
- if (!skb) {
- dev_err(cs->dev, "could not allocate skb\n");
- return;
- }
- skb_reserve(skb, cs->hw_hdr_len);
- }
+ skb = bcs->rx_skb;
+ if (skb == NULL)
+ skb = gigaset_new_rx_skb(bcs);
bcs->hw.bas->goodbytes += skb->len;
- dobytes = TRANSBUFSIZE - skb->len;
+ dobytes = bcs->rx_bufsize - skb->len;
while (count > 0) {
dst = skb_put(skb, count < dobytes ? count : dobytes);
while (count > 0 && dobytes > 0) {
@@ -879,14 +861,10 @@
dump_bytes(DEBUG_STREAM_DUMP,
"rcv data", skb->data, skb->len);
gigaset_skb_rcvd(bcs, skb);
- bcs->skb = skb =
- dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
- if (!skb) {
- dev_err(cs->dev, "could not allocate skb\n");
+ skb = gigaset_new_rx_skb(bcs);
+ if (skb == NULL)
return;
- }
- skb_reserve(skb, cs->hw_hdr_len);
- dobytes = TRANSBUFSIZE;
+ dobytes = bcs->rx_bufsize;
}
}
}
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index b3b7e28..8700474 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -97,8 +97,10 @@
hw->name, __func__, reg, val);
spin_lock(&hw->ctrl_lock);
- if (hw->ctrl_cnt >= HFC_CTRL_BUFSIZE)
+ if (hw->ctrl_cnt >= HFC_CTRL_BUFSIZE) {
+ spin_unlock(&hw->ctrl_lock);
return 1;
+ }
buf = &hw->ctrl_buff[hw->ctrl_in_idx];
buf->hfcs_reg = reg;
buf->reg_val = val;
diff --git a/drivers/isdn/hardware/mISDN/netjet.c b/drivers/isdn/hardware/mISDN/netjet.c
index 0a3553d..54ae71a 100644
--- a/drivers/isdn/hardware/mISDN/netjet.c
+++ b/drivers/isdn/hardware/mISDN/netjet.c
@@ -320,12 +320,12 @@
return -ENOMEM;
}
for (i = 0; i < 2; i++) {
- card->bc[i].hsbuf = kmalloc(NJ_DMA_TXSIZE, GFP_KERNEL);
+ card->bc[i].hsbuf = kmalloc(NJ_DMA_TXSIZE, GFP_ATOMIC);
if (!card->bc[i].hsbuf) {
pr_info("%s: no B%d send buffer\n", card->name, i + 1);
return -ENOMEM;
}
- card->bc[i].hrbuf = kmalloc(NJ_DMA_RXSIZE, GFP_KERNEL);
+ card->bc[i].hrbuf = kmalloc(NJ_DMA_RXSIZE, GFP_ATOMIC);
if (!card->bc[i].hrbuf) {
pr_info("%s: no B%d recv buffer\n", card->name, i + 1);
return -ENOMEM;
diff --git a/drivers/isdn/hysdn/hysdn_net.c b/drivers/isdn/hysdn/hysdn_net.c
index 72eb926..feec8d8 100644
--- a/drivers/isdn/hysdn/hysdn_net.c
+++ b/drivers/isdn/hysdn/hysdn_net.c
@@ -187,12 +187,13 @@
hysdn_rx_netpkt(hysdn_card * card, unsigned char *buf, unsigned short len)
{
struct net_local *lp = card->netif;
- struct net_device *dev = lp->dev;
+ struct net_device *dev;
struct sk_buff *skb;
if (!lp)
return; /* non existing device */
+ dev = lp->dev;
dev->stats.rx_bytes += len;
skb = dev_alloc_skb(len);
diff --git a/drivers/isdn/mISDN/timerdev.c b/drivers/isdn/mISDN/timerdev.c
index c3243c9..81048b8 100644
--- a/drivers/isdn/mISDN/timerdev.c
+++ b/drivers/isdn/mISDN/timerdev.c
@@ -98,8 +98,6 @@
if (*debug & DEBUG_TIMER)
printk(KERN_DEBUG "%s(%p, %p, %d, %p)\n", __func__,
filep, buf, (int)count, off);
- if (*off != filep->f_pos)
- return -ESPIPE;
if (list_empty(&dev->expired) && (dev->work == 0)) {
if (filep->f_flags & O_NONBLOCK)
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 505eb64..81bf25e 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -21,7 +21,7 @@
config LEDS_88PM860X
tristate "LED Support for Marvell 88PM860x PMIC"
- depends on LEDS_CLASS && MFD_88PM860X
+ depends on MFD_88PM860X
help
This option enables support for on-chip LED drivers found on Marvell
Semiconductor 88PM8606 PMIC.
@@ -67,6 +67,16 @@
This option enables support for the Soekris net4801 and net4826 error
LED.
+config LEDS_NET5501
+ tristate "LED Support for Soekris net5501 series Error LED"
+ depends on LEDS_TRIGGERS
+ depends on X86 && LEDS_GPIO_PLATFORM && GPIO_CS5535
+ select LEDS_TRIGGER_DEFAULT_ON
+ default n
+ help
+ Add support for the Soekris net5501 board (detection, error led
+ and GPIO).
+
config LEDS_FSG
tristate "LED Support for the Freecom FSG-3"
depends on MACH_FSG
@@ -285,6 +295,13 @@
This adds support for the Latitude 2100 and similar
notebooks that have an external LED.
+config LEDS_MC13783
+ tristate "LED Support for MC13783 PMIC"
+ depends on MFD_MC13783
+ help
+ This option enable support for on-chip LED drivers found
+ on Freescale Semiconductor MC13783 PMIC.
+
config LEDS_TRIGGERS
bool "LED Trigger support"
help
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 0cd8b99..2493de4 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -13,6 +13,7 @@
obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o
obj-$(CONFIG_LEDS_AMS_DELTA) += leds-ams-delta.o
obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
+obj-$(CONFIG_LEDS_NET5501) += leds-net5501.o
obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
obj-$(CONFIG_LEDS_ALIX2) += leds-alix2.o
obj-$(CONFIG_LEDS_H1940) += leds-h1940.o
@@ -35,6 +36,7 @@
obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o
obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o
+obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 69e7d86..2606600 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -74,7 +74,7 @@
static struct device_attribute led_class_attrs[] = {
__ATTR(brightness, 0644, led_brightness_show, led_brightness_store),
- __ATTR(max_brightness, 0644, led_max_brightness_show, NULL),
+ __ATTR(max_brightness, 0444, led_max_brightness_show, NULL),
#ifdef CONFIG_LEDS_TRIGGERS
__ATTR(trigger, 0644, led_trigger_show, led_trigger_store),
#endif
diff --git a/drivers/leds/leds-88pm860x.c b/drivers/leds/leds-88pm860x.c
index 16a60c0..b767710 100644
--- a/drivers/leds/leds-88pm860x.c
+++ b/drivers/leds/leds-88pm860x.c
@@ -256,8 +256,10 @@
if (pdev->dev.parent->platform_data) {
pm860x_pdata = pdev->dev.parent->platform_data;
pdata = pm860x_pdata->led;
- } else
- pdata = NULL;
+ } else {
+ dev_err(&pdev->dev, "missing platform data\n");
+ return -EINVAL;
+ }
data = kzalloc(sizeof(struct pm860x_led), GFP_KERNEL);
if (data == NULL)
@@ -268,8 +270,11 @@
data->i2c = (chip->id == CHIP_PM8606) ? chip->client : chip->companion;
data->iset = pdata->iset;
data->port = __check_device(pdata, data->name);
- if (data->port < 0)
+ if (data->port < 0) {
+ dev_err(&pdev->dev, "check device failed\n");
+ kfree(data);
return -EINVAL;
+ }
data->current_brightness = 0;
data->cdev.name = data->name;
diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c
index 286b501..5dcdf9d 100644
--- a/drivers/leds/leds-bd2802.c
+++ b/drivers/leds/leds-bd2802.c
@@ -742,7 +742,6 @@
for (i--; i >= 0; i--)
device_remove_file(&led->client->dev, bd2802_attributes[i]);
failed_free:
- i2c_set_clientdata(client, NULL);
kfree(led);
return ret;
@@ -759,7 +758,6 @@
bd2802_disable_adv_conf(led);
for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++)
device_remove_file(&led->client->dev, bd2802_attributes[i]);
- i2c_set_clientdata(client, NULL);
kfree(led);
return 0;
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index 6d94b0b..cc22eee 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -26,7 +26,8 @@
u8 new_level;
u8 can_sleep;
u8 active_low;
- int (*platform_gpio_blink_set)(unsigned gpio,
+ u8 blinking;
+ int (*platform_gpio_blink_set)(unsigned gpio, int state,
unsigned long *delay_on, unsigned long *delay_off);
};
@@ -35,7 +36,13 @@
struct gpio_led_data *led_dat =
container_of(work, struct gpio_led_data, work);
- gpio_set_value_cansleep(led_dat->gpio, led_dat->new_level);
+ if (led_dat->blinking) {
+ led_dat->platform_gpio_blink_set(led_dat->gpio,
+ led_dat->new_level,
+ NULL, NULL);
+ led_dat->blinking = 0;
+ } else
+ gpio_set_value_cansleep(led_dat->gpio, led_dat->new_level);
}
static void gpio_led_set(struct led_classdev *led_cdev,
@@ -60,8 +67,14 @@
if (led_dat->can_sleep) {
led_dat->new_level = level;
schedule_work(&led_dat->work);
- } else
- gpio_set_value(led_dat->gpio, level);
+ } else {
+ if (led_dat->blinking) {
+ led_dat->platform_gpio_blink_set(led_dat->gpio, level,
+ NULL, NULL);
+ led_dat->blinking = 0;
+ } else
+ gpio_set_value(led_dat->gpio, level);
+ }
}
static int gpio_blink_set(struct led_classdev *led_cdev,
@@ -70,12 +83,14 @@
struct gpio_led_data *led_dat =
container_of(led_cdev, struct gpio_led_data, cdev);
- return led_dat->platform_gpio_blink_set(led_dat->gpio, delay_on, delay_off);
+ led_dat->blinking = 1;
+ return led_dat->platform_gpio_blink_set(led_dat->gpio, GPIO_LED_BLINK,
+ delay_on, delay_off);
}
static int __devinit create_gpio_led(const struct gpio_led *template,
struct gpio_led_data *led_dat, struct device *parent,
- int (*blink_set)(unsigned, unsigned long *, unsigned long *))
+ int (*blink_set)(unsigned, int, unsigned long *, unsigned long *))
{
int ret, state;
@@ -97,6 +112,7 @@
led_dat->gpio = template->gpio;
led_dat->can_sleep = gpio_cansleep(template->gpio);
led_dat->active_low = template->active_low;
+ led_dat->blinking = 0;
if (blink_set) {
led_dat->platform_gpio_blink_set = blink_set;
led_dat->cdev.blink_set = gpio_blink_set;
@@ -113,7 +129,7 @@
ret = gpio_direction_output(led_dat->gpio, led_dat->active_low ^ state);
if (ret < 0)
goto err;
-
+
INIT_WORK(&led_dat->work, gpio_led_work);
ret = led_classdev_register(parent, &led_dat->cdev);
diff --git a/drivers/leds/leds-lp3944.c b/drivers/leds/leds-lp3944.c
index 8d5ecce..9010c05 100644
--- a/drivers/leds/leds-lp3944.c
+++ b/drivers/leds/leds-lp3944.c
@@ -379,6 +379,7 @@
{
struct lp3944_platform_data *lp3944_pdata = client->dev.platform_data;
struct lp3944_data *data;
+ int err;
if (lp3944_pdata == NULL) {
dev_err(&client->dev, "no platform data\n");
@@ -401,9 +402,13 @@
mutex_init(&data->lock);
- dev_info(&client->dev, "lp3944 enabled\n");
+ err = lp3944_configure(client, data, lp3944_pdata);
+ if (err < 0) {
+ kfree(data);
+ return err;
+ }
- lp3944_configure(client, data, lp3944_pdata);
+ dev_info(&client->dev, "lp3944 enabled\n");
return 0;
}
@@ -427,7 +432,6 @@
}
kfree(data);
- i2c_set_clientdata(client, NULL);
return 0;
}
diff --git a/drivers/leds/leds-mc13783.c b/drivers/leds/leds-mc13783.c
new file mode 100644
index 0000000..f05bb08
--- /dev/null
+++ b/drivers/leds/leds-mc13783.c
@@ -0,0 +1,403 @@
+/*
+ * LEDs driver for Freescale MC13783
+ *
+ * Copyright (C) 2010 Philippe Rétornaz
+ *
+ * Based on leds-da903x:
+ * Copyright (C) 2008 Compulab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * Copyright (C) 2006-2008 Marvell International Ltd.
+ * Eric Miao <eric.miao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/slab.h>
+
+struct mc13783_led {
+ struct led_classdev cdev;
+ struct work_struct work;
+ struct mc13783 *master;
+ enum led_brightness new_brightness;
+ int id;
+};
+
+#define MC13783_REG_LED_CONTROL_0 51
+#define MC13783_LED_C0_ENABLE_BIT (1 << 0)
+#define MC13783_LED_C0_TRIODE_MD_BIT (1 << 7)
+#define MC13783_LED_C0_TRIODE_AD_BIT (1 << 8)
+#define MC13783_LED_C0_TRIODE_KP_BIT (1 << 9)
+#define MC13783_LED_C0_BOOST_BIT (1 << 10)
+#define MC13783_LED_C0_ABMODE_MASK 0x7
+#define MC13783_LED_C0_ABMODE 11
+#define MC13783_LED_C0_ABREF_MASK 0x3
+#define MC13783_LED_C0_ABREF 14
+
+#define MC13783_REG_LED_CONTROL_1 52
+#define MC13783_LED_C1_TC1HALF_BIT (1 << 18)
+
+#define MC13783_REG_LED_CONTROL_2 53
+#define MC13783_LED_C2_BL_P_MASK 0xf
+#define MC13783_LED_C2_MD_P 9
+#define MC13783_LED_C2_AD_P 13
+#define MC13783_LED_C2_KP_P 17
+#define MC13783_LED_C2_BL_C_MASK 0x7
+#define MC13783_LED_C2_MD_C 0
+#define MC13783_LED_C2_AD_C 3
+#define MC13783_LED_C2_KP_C 6
+
+#define MC13783_REG_LED_CONTROL_3 54
+#define MC13783_LED_C3_TC_P 6
+#define MC13783_LED_C3_TC_P_MASK 0x1f
+
+#define MC13783_REG_LED_CONTROL_4 55
+#define MC13783_REG_LED_CONTROL_5 56
+
+#define MC13783_LED_Cx_PERIOD 21
+#define MC13783_LED_Cx_PERIOD_MASK 0x3
+#define MC13783_LED_Cx_SLEWLIM_BIT (1 << 23)
+#define MC13783_LED_Cx_TRIODE_TC_BIT (1 << 23)
+#define MC13783_LED_Cx_TC_C_MASK 0x3
+
+static void mc13783_led_work(struct work_struct *work)
+{
+ struct mc13783_led *led = container_of(work, struct mc13783_led, work);
+ int reg = 0;
+ int mask = 0;
+ int value = 0;
+ int bank, off, shift;
+
+ switch (led->id) {
+ case MC13783_LED_MD:
+ reg = MC13783_REG_LED_CONTROL_2;
+ mask = MC13783_LED_C2_BL_P_MASK << MC13783_LED_C2_MD_P;
+ value = (led->new_brightness >> 4) << MC13783_LED_C2_MD_P;
+ break;
+ case MC13783_LED_AD:
+ reg = MC13783_REG_LED_CONTROL_2;
+ mask = MC13783_LED_C2_BL_P_MASK << MC13783_LED_C2_AD_P;
+ value = (led->new_brightness >> 4) << MC13783_LED_C2_AD_P;
+ break;
+ case MC13783_LED_KP:
+ reg = MC13783_REG_LED_CONTROL_2;
+ mask = MC13783_LED_C2_BL_P_MASK << MC13783_LED_C2_KP_P;
+ value = (led->new_brightness >> 4) << MC13783_LED_C2_KP_P;
+ break;
+ case MC13783_LED_R1:
+ case MC13783_LED_G1:
+ case MC13783_LED_B1:
+ case MC13783_LED_R2:
+ case MC13783_LED_G2:
+ case MC13783_LED_B2:
+ case MC13783_LED_R3:
+ case MC13783_LED_G3:
+ case MC13783_LED_B3:
+ off = led->id - MC13783_LED_R1;
+ bank = off/3;
+ reg = MC13783_REG_LED_CONTROL_3 + off/3;
+ shift = (off - bank * 3) * 5 + MC13783_LED_C3_TC_P;
+ value = (led->new_brightness >> 3) << shift;
+ mask = MC13783_LED_C3_TC_P_MASK << shift;
+ break;
+ }
+
+ mc13783_lock(led->master);
+
+ mc13783_reg_rmw(led->master, reg, mask, value);
+
+ mc13783_unlock(led->master);
+}
+
+static void mc13783_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct mc13783_led *led;
+
+ led = container_of(led_cdev, struct mc13783_led, cdev);
+ led->new_brightness = value;
+ schedule_work(&led->work);
+}
+
+static int __devinit mc13783_led_setup(struct mc13783_led *led, int max_current)
+{
+ int shift = 0;
+ int mask = 0;
+ int value = 0;
+ int reg = 0;
+ int ret, bank;
+
+ switch (led->id) {
+ case MC13783_LED_MD:
+ shift = MC13783_LED_C2_MD_C;
+ mask = MC13783_LED_C2_BL_C_MASK;
+ value = max_current & MC13783_LED_C2_BL_C_MASK;
+ reg = MC13783_REG_LED_CONTROL_2;
+ break;
+ case MC13783_LED_AD:
+ shift = MC13783_LED_C2_AD_C;
+ mask = MC13783_LED_C2_BL_C_MASK;
+ value = max_current & MC13783_LED_C2_BL_C_MASK;
+ reg = MC13783_REG_LED_CONTROL_2;
+ break;
+ case MC13783_LED_KP:
+ shift = MC13783_LED_C2_KP_C;
+ mask = MC13783_LED_C2_BL_C_MASK;
+ value = max_current & MC13783_LED_C2_BL_C_MASK;
+ reg = MC13783_REG_LED_CONTROL_2;
+ break;
+ case MC13783_LED_R1:
+ case MC13783_LED_G1:
+ case MC13783_LED_B1:
+ case MC13783_LED_R2:
+ case MC13783_LED_G2:
+ case MC13783_LED_B2:
+ case MC13783_LED_R3:
+ case MC13783_LED_G3:
+ case MC13783_LED_B3:
+ bank = (led->id - MC13783_LED_R1)/3;
+ reg = MC13783_REG_LED_CONTROL_3 + bank;
+ shift = ((led->id - MC13783_LED_R1) - bank * 3) * 2;
+ mask = MC13783_LED_Cx_TC_C_MASK;
+ value = max_current & MC13783_LED_Cx_TC_C_MASK;
+ break;
+ }
+
+ mc13783_lock(led->master);
+
+ ret = mc13783_reg_rmw(led->master, reg, mask << shift,
+ value << shift);
+
+ mc13783_unlock(led->master);
+ return ret;
+}
+
+static int __devinit mc13783_leds_prepare(struct platform_device *pdev)
+{
+ struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct mc13783 *dev = dev_get_drvdata(pdev->dev.parent);
+ int ret = 0;
+ int reg = 0;
+
+ mc13783_lock(dev);
+
+ if (pdata->flags & MC13783_LED_TC1HALF)
+ reg |= MC13783_LED_C1_TC1HALF_BIT;
+
+ if (pdata->flags & MC13783_LED_SLEWLIMTC)
+ reg |= MC13783_LED_Cx_SLEWLIM_BIT;
+
+ ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_1, reg);
+ if (ret)
+ goto out;
+
+ reg = (pdata->bl_period & MC13783_LED_Cx_PERIOD_MASK) <<
+ MC13783_LED_Cx_PERIOD;
+
+ if (pdata->flags & MC13783_LED_SLEWLIMBL)
+ reg |= MC13783_LED_Cx_SLEWLIM_BIT;
+
+ ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_2, reg);
+ if (ret)
+ goto out;
+
+ reg = (pdata->tc1_period & MC13783_LED_Cx_PERIOD_MASK) <<
+ MC13783_LED_Cx_PERIOD;
+
+ if (pdata->flags & MC13783_LED_TRIODE_TC1)
+ reg |= MC13783_LED_Cx_TRIODE_TC_BIT;
+
+ ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_3, reg);
+ if (ret)
+ goto out;
+
+ reg = (pdata->tc2_period & MC13783_LED_Cx_PERIOD_MASK) <<
+ MC13783_LED_Cx_PERIOD;
+
+ if (pdata->flags & MC13783_LED_TRIODE_TC2)
+ reg |= MC13783_LED_Cx_TRIODE_TC_BIT;
+
+ ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_4, reg);
+ if (ret)
+ goto out;
+
+ reg = (pdata->tc3_period & MC13783_LED_Cx_PERIOD_MASK) <<
+ MC13783_LED_Cx_PERIOD;
+
+ if (pdata->flags & MC13783_LED_TRIODE_TC3)
+ reg |= MC13783_LED_Cx_TRIODE_TC_BIT;;
+
+ ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_5, reg);
+ if (ret)
+ goto out;
+
+ reg = MC13783_LED_C0_ENABLE_BIT;
+ if (pdata->flags & MC13783_LED_TRIODE_MD)
+ reg |= MC13783_LED_C0_TRIODE_MD_BIT;
+ if (pdata->flags & MC13783_LED_TRIODE_AD)
+ reg |= MC13783_LED_C0_TRIODE_AD_BIT;
+ if (pdata->flags & MC13783_LED_TRIODE_KP)
+ reg |= MC13783_LED_C0_TRIODE_KP_BIT;
+ if (pdata->flags & MC13783_LED_BOOST_EN)
+ reg |= MC13783_LED_C0_BOOST_BIT;
+
+ reg |= (pdata->abmode & MC13783_LED_C0_ABMODE_MASK) <<
+ MC13783_LED_C0_ABMODE;
+ reg |= (pdata->abref & MC13783_LED_C0_ABREF_MASK) <<
+ MC13783_LED_C0_ABREF;
+
+ ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_0, reg);
+
+out:
+ mc13783_unlock(dev);
+ return ret;
+}
+
+static int __devinit mc13783_led_probe(struct platform_device *pdev)
+{
+ struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct mc13783_led_platform_data *led_cur;
+ struct mc13783_led *led, *led_dat;
+ int ret, i;
+ int init_led = 0;
+
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "missing platform data\n");
+ return -ENODEV;
+ }
+
+ if (pdata->num_leds < 1 || pdata->num_leds > MC13783_LED_MAX) {
+ dev_err(&pdev->dev, "Invalid led count %d\n", pdata->num_leds);
+ return -EINVAL;
+ }
+
+ led = kzalloc(sizeof(*led) * pdata->num_leds, GFP_KERNEL);
+ if (led == NULL) {
+ dev_err(&pdev->dev, "failed to alloc memory\n");
+ return -ENOMEM;
+ }
+
+ ret = mc13783_leds_prepare(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to init led driver\n");
+ goto err_free;
+ }
+
+ for (i = 0; i < pdata->num_leds; i++) {
+ led_dat = &led[i];
+ led_cur = &pdata->led[i];
+
+ if (led_cur->id > MC13783_LED_MAX || led_cur->id < 0) {
+ dev_err(&pdev->dev, "invalid id %d\n", led_cur->id);
+ ret = -EINVAL;
+ goto err_register;
+ }
+
+ if (init_led & (1 << led_cur->id)) {
+ dev_err(&pdev->dev, "led %d already initialized\n",
+ led_cur->id);
+ ret = -EINVAL;
+ goto err_register;
+ }
+
+ init_led |= 1 << led_cur->id;
+ led_dat->cdev.name = led_cur->name;
+ led_dat->cdev.default_trigger = led_cur->default_trigger;
+ led_dat->cdev.brightness_set = mc13783_led_set;
+ led_dat->cdev.brightness = LED_OFF;
+ led_dat->id = led_cur->id;
+ led_dat->master = dev_get_drvdata(pdev->dev.parent);
+
+ INIT_WORK(&led_dat->work, mc13783_led_work);
+
+ ret = led_classdev_register(pdev->dev.parent, &led_dat->cdev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register led %d\n",
+ led_dat->id);
+ goto err_register;
+ }
+
+ ret = mc13783_led_setup(led_dat, led_cur->max_current);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to init led %d\n",
+ led_dat->id);
+ i++;
+ goto err_register;
+ }
+ }
+
+ platform_set_drvdata(pdev, led);
+ return 0;
+
+err_register:
+ for (i = i - 1; i >= 0; i--) {
+ led_classdev_unregister(&led[i].cdev);
+ cancel_work_sync(&led[i].work);
+ }
+
+err_free:
+ kfree(led);
+ return ret;
+}
+
+static int __devexit mc13783_led_remove(struct platform_device *pdev)
+{
+ struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct mc13783_led *led = platform_get_drvdata(pdev);
+ struct mc13783 *dev = dev_get_drvdata(pdev->dev.parent);
+ int i;
+
+ for (i = 0; i < pdata->num_leds; i++) {
+ led_classdev_unregister(&led[i].cdev);
+ cancel_work_sync(&led[i].work);
+ }
+
+ mc13783_lock(dev);
+
+ mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_0, 0);
+ mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_1, 0);
+ mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_2, 0);
+ mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_3, 0);
+ mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_4, 0);
+ mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_5, 0);
+
+ mc13783_unlock(dev);
+
+ kfree(led);
+ return 0;
+}
+
+static struct platform_driver mc13783_led_driver = {
+ .driver = {
+ .name = "mc13783-led",
+ .owner = THIS_MODULE,
+ },
+ .probe = mc13783_led_probe,
+ .remove = __devexit_p(mc13783_led_remove),
+};
+
+static int __init mc13783_led_init(void)
+{
+ return platform_driver_register(&mc13783_led_driver);
+}
+module_init(mc13783_led_init);
+
+static void __exit mc13783_led_exit(void)
+{
+ platform_driver_unregister(&mc13783_led_driver);
+}
+module_exit(mc13783_led_exit);
+
+MODULE_DESCRIPTION("LEDs driver for Freescale MC13783 PMIC");
+MODULE_AUTHOR("Philippe Retornaz <philippe.retornaz@epfl.ch>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mc13783-led");
diff --git a/drivers/leds/leds-net5501.c b/drivers/leds/leds-net5501.c
new file mode 100644
index 0000000..3063f59
--- /dev/null
+++ b/drivers/leds/leds-net5501.c
@@ -0,0 +1,94 @@
+/*
+ * Soekris board support code
+ *
+ * Copyright (C) 2008-2009 Tower Technologies
+ * Written by Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/geode.h>
+
+static struct gpio_led net5501_leds[] = {
+ {
+ .name = "error",
+ .gpio = 6,
+ .default_trigger = "default-on",
+ },
+};
+
+static struct gpio_led_platform_data net5501_leds_data = {
+ .num_leds = ARRAY_SIZE(net5501_leds),
+ .leds = net5501_leds,
+};
+
+static struct platform_device net5501_leds_dev = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &net5501_leds_data,
+};
+
+static void __init init_net5501(void)
+{
+ platform_device_register(&net5501_leds_dev);
+}
+
+struct soekris_board {
+ u16 offset;
+ char *sig;
+ u8 len;
+ void (*init)(void);
+};
+
+static struct soekris_board __initdata boards[] = {
+ { 0xb7b, "net5501", 7, init_net5501 }, /* net5501 v1.33/1.33c */
+ { 0xb1f, "net5501", 7, init_net5501 }, /* net5501 v1.32i */
+};
+
+static int __init soekris_init(void)
+{
+ int i;
+ unsigned char *rombase, *bios;
+
+ if (!is_geode())
+ return 0;
+
+ rombase = ioremap(0xffff0000, 0xffff);
+ if (!rombase) {
+ printk(KERN_INFO "Soekris net5501 LED driver failed to get rombase");
+ return 0;
+ }
+
+ bios = rombase + 0x20; /* null terminated */
+
+ if (strncmp(bios, "comBIOS", 7))
+ goto unmap;
+
+ for (i = 0; i < ARRAY_SIZE(boards); i++) {
+ unsigned char *model = rombase + boards[i].offset;
+
+ if (strncmp(model, boards[i].sig, boards[i].len) == 0) {
+ printk(KERN_INFO "Soekris %s: %s\n", model, bios);
+
+ if (boards[i].init)
+ boards[i].init();
+ break;
+ }
+ }
+
+unmap:
+ iounmap(rombase);
+ return 0;
+}
+
+arch_initcall(soekris_init);
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index 6682175..43d0875 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -320,10 +320,8 @@
mutex_init(&data->update_lock);
err = pca9532_configure(client, data, pca9532_pdata);
- if (err) {
+ if (err)
kfree(data);
- i2c_set_clientdata(client, NULL);
- }
return err;
}
@@ -351,7 +349,6 @@
}
kfree(data);
- i2c_set_clientdata(client, NULL);
return 0;
}
diff --git a/drivers/leds/leds-pca955x.c b/drivers/leds/leds-pca955x.c
index 8ff50f2..66aa3e8 100644
--- a/drivers/leds/leds-pca955x.c
+++ b/drivers/leds/leds-pca955x.c
@@ -342,7 +342,6 @@
}
kfree(pca955x);
- i2c_set_clientdata(client, NULL);
return err;
}
@@ -358,7 +357,6 @@
}
kfree(pca955x);
- i2c_set_clientdata(client, NULL);
return 0;
}
diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c
index 51477ec..a688293 100644
--- a/drivers/leds/leds-ss4200.c
+++ b/drivers/leds/leds-ss4200.c
@@ -534,7 +534,7 @@
set_power_light_amber_noblink();
return 0;
out_err:
- for (; i >= 0; i--)
+ for (i--; i >= 0; i--)
unregister_nasgpio_led(i);
pci_unregister_driver(&nas_gpio_pci_driver);
return ret;
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index 9714780..b6e7ddc 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -492,8 +492,8 @@
}
/* Add media bay devices if any */
- pnode = mbdev->ofdev.dev.of_node;
- if (mbdev)
+ if (mbdev) {
+ pnode = mbdev->ofdev.dev.of_node;
for (np = NULL; (np = of_get_next_child(pnode, np)) != NULL;) {
if (macio_skip_device(np))
continue;
@@ -502,10 +502,11 @@
mbdev, root_res) == NULL)
of_node_put(np);
}
+ }
/* Add serial ports if any */
- pnode = sdev->ofdev.dev.of_node;
if (sdev) {
+ pnode = sdev->ofdev.dev.of_node;
for (np = NULL; (np = of_get_next_child(pnode, np)) != NULL;) {
if (macio_skip_device(np))
continue;
@@ -525,7 +526,6 @@
int macio_register_driver(struct macio_driver *drv)
{
/* initialize common driver fields */
- drv->driver.name = drv->name;
drv->driver.bus = &macio_bus_type;
/* register with core */
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index 288acce..2fd435b 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -728,8 +728,10 @@
static struct macio_driver media_bay_driver =
{
- .name = "media-bay",
- .match_table = media_bay_match,
+ .driver = {
+ .name = "media-bay",
+ .of_match_table = media_bay_match,
+ },
.probe = media_bay_attach,
.suspend = media_bay_suspend,
.resume = media_bay_resume
diff --git a/drivers/macintosh/rack-meter.c b/drivers/macintosh/rack-meter.c
index 12946c5..53cce3a 100644
--- a/drivers/macintosh/rack-meter.c
+++ b/drivers/macintosh/rack-meter.c
@@ -584,9 +584,11 @@
};
static struct macio_driver rackmeter_driver = {
- .name = "rackmeter",
- .owner = THIS_MODULE,
- .match_table = rackmeter_match,
+ .driver = {
+ .name = "rackmeter",
+ .owner = THIS_MODULE,
+ .of_match_table = rackmeter_match,
+ },
.probe = rackmeter_probe,
.remove = __devexit_p(rackmeter_remove),
.shutdown = rackmeter_shutdown,
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index 16d82f1..c42eeb4 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -182,7 +182,6 @@
thermostat = NULL;
- i2c_set_clientdata(client, NULL);
kfree(th);
return 0;
@@ -400,7 +399,6 @@
rc = read_reg(th, CONFIG_REG);
if (rc < 0) {
dev_err(&client->dev, "Thermostat failed to read config!\n");
- i2c_set_clientdata(client, NULL);
kfree(th);
return -ENODEV;
}
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index d8257d3..647c6ad 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -107,10 +107,8 @@
i2c_set_clientdata(client, lm);
rc = wf_register_sensor(&lm->sens);
- if (rc) {
- i2c_set_clientdata(client, NULL);
+ if (rc)
kfree(lm);
- }
return rc;
}
@@ -216,7 +214,6 @@
/* release sensor */
wf_unregister_sensor(&lm->sens);
- i2c_set_clientdata(client, NULL);
return 0;
}
diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c
index b486eb9..8204113 100644
--- a/drivers/macintosh/windfarm_max6690_sensor.c
+++ b/drivers/macintosh/windfarm_max6690_sensor.c
@@ -81,7 +81,6 @@
rc = wf_register_sensor(&max->sens);
if (rc) {
- i2c_set_clientdata(client, NULL);
kfree(max);
}
diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
index e20330a..65a8ff3 100644
--- a/drivers/macintosh/windfarm_smu_sat.c
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -376,7 +376,6 @@
/* XXX TODO */
sat->i2c = NULL;
- i2c_set_clientdata(client, NULL);
return 0;
}
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 46b3a04..cb20d0b 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2087,6 +2087,7 @@
/* First make sure individual recovery_offsets are correct */
list_for_each_entry(rdev, &mddev->disks, same_set) {
if (rdev->raid_disk >= 0 &&
+ mddev->delta_disks >= 0 &&
!test_bit(In_sync, &rdev->flags) &&
mddev->curr_resync_completed > rdev->recovery_offset)
rdev->recovery_offset = mddev->curr_resync_completed;
@@ -3001,6 +3002,9 @@
return -EINVAL;
}
+ list_for_each_entry(rdev, &mddev->disks, same_set)
+ rdev->new_raid_disk = rdev->raid_disk;
+
/* ->takeover must set new_* and/or delta_disks
* if it succeeds, and may set them when it fails.
*/
@@ -3051,13 +3055,35 @@
mddev->safemode = 0;
}
- module_put(mddev->pers->owner);
- /* Invalidate devices that are now superfluous */
- list_for_each_entry(rdev, &mddev->disks, same_set)
- if (rdev->raid_disk >= mddev->raid_disks) {
- rdev->raid_disk = -1;
+ list_for_each_entry(rdev, &mddev->disks, same_set) {
+ char nm[20];
+ if (rdev->raid_disk < 0)
+ continue;
+ if (rdev->new_raid_disk > mddev->raid_disks)
+ rdev->new_raid_disk = -1;
+ if (rdev->new_raid_disk == rdev->raid_disk)
+ continue;
+ sprintf(nm, "rd%d", rdev->raid_disk);
+ sysfs_remove_link(&mddev->kobj, nm);
+ }
+ list_for_each_entry(rdev, &mddev->disks, same_set) {
+ if (rdev->raid_disk < 0)
+ continue;
+ if (rdev->new_raid_disk == rdev->raid_disk)
+ continue;
+ rdev->raid_disk = rdev->new_raid_disk;
+ if (rdev->raid_disk < 0)
clear_bit(In_sync, &rdev->flags);
+ else {
+ char nm[20];
+ sprintf(nm, "rd%d", rdev->raid_disk);
+ if(sysfs_create_link(&mddev->kobj, &rdev->kobj, nm))
+ printk("md: cannot register %s for %s after level change\n",
+ nm, mdname(mddev));
}
+ }
+
+ module_put(mddev->pers->owner);
mddev->pers = pers;
mddev->private = priv;
strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
@@ -5895,6 +5921,7 @@
atomic_inc(&mddev->openers);
mutex_unlock(&mddev->open_mutex);
+ check_disk_size_change(mddev->gendisk, bdev);
out:
return err;
}
@@ -6846,6 +6873,7 @@
rcu_read_lock();
list_for_each_entry_rcu(rdev, &mddev->disks, same_set)
if (rdev->raid_disk >= 0 &&
+ mddev->delta_disks >= 0 &&
!test_bit(Faulty, &rdev->flags) &&
!test_bit(In_sync, &rdev->flags) &&
rdev->recovery_offset < mddev->curr_resync)
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 7ab5ea1..10597bf 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -78,6 +78,9 @@
int desc_nr; /* descriptor index in the superblock */
int raid_disk; /* role of device in array */
+ int new_raid_disk; /* role that the device will have in
+ * the array after a level-change completes.
+ */
int saved_raid_disk; /* role that device used to have in the
* array and could again if we did a partial
* resync from the bitmap
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index e70f004..563abed 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -173,9 +173,11 @@
list_for_each_entry(rdev1, &mddev->disks, same_set) {
int j = rdev1->raid_disk;
- if (mddev->level == 10)
+ if (mddev->level == 10) {
/* taking over a raid10-n2 array */
j /= 2;
+ rdev1->new_raid_disk = j;
+ }
if (j < 0 || j >= mddev->raid_disks) {
printk(KERN_ERR "md/raid0:%s: bad disk number %d - "
@@ -361,12 +363,6 @@
mddev->private = conf;
}
conf = mddev->private;
- if (conf->scale_raid_disks) {
- int i;
- for (i=0; i < conf->strip_zone[0].nb_dev; i++)
- conf->devlist[i]->raid_disk /= conf->scale_raid_disks;
- /* FIXME update sysfs rd links */
- }
/* calculate array device size */
md_set_array_sectors(mddev, raid0_size(mddev, 0, 0));
@@ -573,7 +569,7 @@
return;
}
-static void *raid0_takeover_raid5(mddev_t *mddev)
+static void *raid0_takeover_raid45(mddev_t *mddev)
{
mdk_rdev_t *rdev;
raid0_conf_t *priv_conf;
@@ -596,6 +592,7 @@
/* Set new parameters */
mddev->new_level = 0;
+ mddev->new_layout = 0;
mddev->new_chunk_sectors = mddev->chunk_sectors;
mddev->raid_disks--;
mddev->delta_disks = -1;
@@ -635,6 +632,7 @@
/* Set new parameters */
mddev->new_level = 0;
+ mddev->new_layout = 0;
mddev->new_chunk_sectors = mddev->chunk_sectors;
mddev->delta_disks = - mddev->raid_disks / 2;
mddev->raid_disks += mddev->delta_disks;
@@ -643,19 +641,22 @@
mddev->recovery_cp = MaxSector;
create_strip_zones(mddev, &priv_conf);
- priv_conf->scale_raid_disks = 2;
return priv_conf;
}
static void *raid0_takeover(mddev_t *mddev)
{
/* raid0 can take over:
+ * raid4 - if all data disks are active.
* raid5 - providing it is Raid4 layout and one disk is faulty
* raid10 - assuming we have all necessary active disks
*/
+ if (mddev->level == 4)
+ return raid0_takeover_raid45(mddev);
+
if (mddev->level == 5) {
if (mddev->layout == ALGORITHM_PARITY_N)
- return raid0_takeover_raid5(mddev);
+ return raid0_takeover_raid45(mddev);
printk(KERN_ERR "md/raid0:%s: Raid can only takeover Raid5 with layout: %d\n",
mdname(mddev), ALGORITHM_PARITY_N);
diff --git a/drivers/md/raid0.h b/drivers/md/raid0.h
index d724e66..91f8e87 100644
--- a/drivers/md/raid0.h
+++ b/drivers/md/raid0.h
@@ -13,9 +13,6 @@
struct strip_zone *strip_zone;
mdk_rdev_t **devlist; /* lists of rdevs, pointed to by strip_zone->dev */
int nr_strip_zones;
- int scale_raid_disks; /* divide rdev->raid_disks by this in run()
- * to handle conversion from raid10
- */
};
typedef struct raid0_private_data raid0_conf_t;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 0372499..42e64e4 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1482,14 +1482,14 @@
int sectors = r10_bio->sectors;
mdk_rdev_t*rdev;
int max_read_errors = atomic_read(&mddev->max_corr_read_errors);
+ int d = r10_bio->devs[r10_bio->read_slot].devnum;
rcu_read_lock();
- {
- int d = r10_bio->devs[r10_bio->read_slot].devnum;
+ rdev = rcu_dereference(conf->mirrors[d].rdev);
+ if (rdev) { /* If rdev is not NULL */
char b[BDEVNAME_SIZE];
int cur_read_error_count = 0;
- rdev = rcu_dereference(conf->mirrors[d].rdev);
bdevname(rdev->bdev, b);
if (test_bit(Faulty, &rdev->flags)) {
@@ -1530,7 +1530,7 @@
rcu_read_lock();
do {
- int d = r10_bio->devs[sl].devnum;
+ d = r10_bio->devs[sl].devnum;
rdev = rcu_dereference(conf->mirrors[d].rdev);
if (rdev &&
test_bit(In_sync, &rdev->flags)) {
@@ -1564,7 +1564,7 @@
rcu_read_lock();
while (sl != r10_bio->read_slot) {
char b[BDEVNAME_SIZE];
- int d;
+
if (sl==0)
sl = conf->copies;
sl--;
@@ -1601,7 +1601,7 @@
}
sl = start;
while (sl != r10_bio->read_slot) {
- int d;
+
if (sl==0)
sl = conf->copies;
sl--;
@@ -2161,22 +2161,22 @@
sector_t stride, size;
int err = -EINVAL;
- if (mddev->chunk_sectors < (PAGE_SIZE >> 9) ||
- !is_power_of_2(mddev->chunk_sectors)) {
+ if (mddev->new_chunk_sectors < (PAGE_SIZE >> 9) ||
+ !is_power_of_2(mddev->new_chunk_sectors)) {
printk(KERN_ERR "md/raid10:%s: chunk size must be "
"at least PAGE_SIZE(%ld) and be a power of 2.\n",
mdname(mddev), PAGE_SIZE);
goto out;
}
- nc = mddev->layout & 255;
- fc = (mddev->layout >> 8) & 255;
- fo = mddev->layout & (1<<16);
+ nc = mddev->new_layout & 255;
+ fc = (mddev->new_layout >> 8) & 255;
+ fo = mddev->new_layout & (1<<16);
if ((nc*fc) <2 || (nc*fc) > mddev->raid_disks ||
- (mddev->layout >> 17)) {
+ (mddev->new_layout >> 17)) {
printk(KERN_ERR "md/raid10:%s: unsupported raid10 layout: 0x%8x\n",
- mdname(mddev), mddev->layout);
+ mdname(mddev), mddev->new_layout);
goto out;
}
@@ -2241,7 +2241,6 @@
if (!conf->thread)
goto out;
- conf->scale_disks = 0;
conf->mddev = mddev;
return conf;
@@ -2300,11 +2299,6 @@
if (disk_idx >= conf->raid_disks
|| disk_idx < 0)
continue;
- if (conf->scale_disks) {
- disk_idx *= conf->scale_disks;
- rdev->raid_disk = disk_idx;
- /* MOVE 'rd%d' link !! */
- }
disk = conf->mirrors + disk_idx;
disk->rdev = rdev;
@@ -2435,26 +2429,22 @@
return ERR_PTR(-EINVAL);
}
- /* Update slot numbers to obtain
- * degraded raid10 with missing mirrors
- */
- list_for_each_entry(rdev, &mddev->disks, same_set) {
- rdev->raid_disk *= 2;
- }
-
/* Set new parameters */
mddev->new_level = 10;
/* new layout: far_copies = 1, near_copies = 2 */
mddev->new_layout = (1<<8) + 2;
mddev->new_chunk_sectors = mddev->chunk_sectors;
mddev->delta_disks = mddev->raid_disks;
- mddev->degraded = mddev->raid_disks;
mddev->raid_disks *= 2;
/* make sure it will be not marked as dirty */
mddev->recovery_cp = MaxSector;
conf = setup_conf(mddev);
- conf->scale_disks = 2;
+ if (!IS_ERR(conf))
+ list_for_each_entry(rdev, &mddev->disks, same_set)
+ if (rdev->raid_disk >= 0)
+ rdev->new_raid_disk = rdev->raid_disk * 2;
+
return conf;
}
diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h
index 3824a08..2316ac2 100644
--- a/drivers/md/raid10.h
+++ b/drivers/md/raid10.h
@@ -38,11 +38,6 @@
int chunk_shift; /* shift from chunks to sectors */
sector_t chunk_mask;
- int scale_disks; /* When starting array, multiply
- * each ->raid_disk by this.
- * Need for raid0->raid10 migration
- */
-
struct list_head retry_list;
/* queue pending writes and submit them on unplug */
struct bio_list pending_bio_list;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 9ea17d6..96c6902 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -277,12 +277,13 @@
return sh;
}
-static void shrink_buffers(struct stripe_head *sh, int num)
+static void shrink_buffers(struct stripe_head *sh)
{
struct page *p;
int i;
+ int num = sh->raid_conf->pool_size;
- for (i=0; i<num ; i++) {
+ for (i = 0; i < num ; i++) {
p = sh->dev[i].page;
if (!p)
continue;
@@ -291,11 +292,12 @@
}
}
-static int grow_buffers(struct stripe_head *sh, int num)
+static int grow_buffers(struct stripe_head *sh)
{
int i;
+ int num = sh->raid_conf->pool_size;
- for (i=0; i<num; i++) {
+ for (i = 0; i < num; i++) {
struct page *page;
if (!(page = alloc_page(GFP_KERNEL))) {
@@ -364,6 +366,73 @@
return NULL;
}
+/*
+ * Need to check if array has failed when deciding whether to:
+ * - start an array
+ * - remove non-faulty devices
+ * - add a spare
+ * - allow a reshape
+ * This determination is simple when no reshape is happening.
+ * However if there is a reshape, we need to carefully check
+ * both the before and after sections.
+ * This is because some failed devices may only affect one
+ * of the two sections, and some non-in_sync devices may
+ * be insync in the section most affected by failed devices.
+ */
+static int has_failed(raid5_conf_t *conf)
+{
+ int degraded;
+ int i;
+ if (conf->mddev->reshape_position == MaxSector)
+ return conf->mddev->degraded > conf->max_degraded;
+
+ rcu_read_lock();
+ degraded = 0;
+ for (i = 0; i < conf->previous_raid_disks; i++) {
+ mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev);
+ if (!rdev || test_bit(Faulty, &rdev->flags))
+ degraded++;
+ else if (test_bit(In_sync, &rdev->flags))
+ ;
+ else
+ /* not in-sync or faulty.
+ * If the reshape increases the number of devices,
+ * this is being recovered by the reshape, so
+ * this 'previous' section is not in_sync.
+ * If the number of devices is being reduced however,
+ * the device can only be part of the array if
+ * we are reverting a reshape, so this section will
+ * be in-sync.
+ */
+ if (conf->raid_disks >= conf->previous_raid_disks)
+ degraded++;
+ }
+ rcu_read_unlock();
+ if (degraded > conf->max_degraded)
+ return 1;
+ rcu_read_lock();
+ degraded = 0;
+ for (i = 0; i < conf->raid_disks; i++) {
+ mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev);
+ if (!rdev || test_bit(Faulty, &rdev->flags))
+ degraded++;
+ else if (test_bit(In_sync, &rdev->flags))
+ ;
+ else
+ /* not in-sync or faulty.
+ * If reshape increases the number of devices, this
+ * section has already been recovered, else it
+ * almost certainly hasn't.
+ */
+ if (conf->raid_disks <= conf->previous_raid_disks)
+ degraded++;
+ }
+ rcu_read_unlock();
+ if (degraded > conf->max_degraded)
+ return 1;
+ return 0;
+}
+
static void unplug_slaves(mddev_t *mddev);
static void raid5_unplug_device(struct request_queue *q);
@@ -1240,19 +1309,18 @@
static int grow_one_stripe(raid5_conf_t *conf)
{
struct stripe_head *sh;
- int disks = max(conf->raid_disks, conf->previous_raid_disks);
sh = kmem_cache_alloc(conf->slab_cache, GFP_KERNEL);
if (!sh)
return 0;
- memset(sh, 0, sizeof(*sh) + (disks-1)*sizeof(struct r5dev));
+ memset(sh, 0, sizeof(*sh) + (conf->pool_size-1)*sizeof(struct r5dev));
sh->raid_conf = conf;
spin_lock_init(&sh->lock);
#ifdef CONFIG_MULTICORE_RAID456
init_waitqueue_head(&sh->ops.wait_for_ops);
#endif
- if (grow_buffers(sh, disks)) {
- shrink_buffers(sh, disks);
+ if (grow_buffers(sh)) {
+ shrink_buffers(sh);
kmem_cache_free(conf->slab_cache, sh);
return 0;
}
@@ -1468,7 +1536,7 @@
if (!sh)
return 0;
BUG_ON(atomic_read(&sh->count));
- shrink_buffers(sh, conf->pool_size);
+ shrink_buffers(sh);
kmem_cache_free(conf->slab_cache, sh);
atomic_dec(&conf->active_stripes);
return 1;
@@ -2963,7 +3031,6 @@
mdk_rdev_t *rdev;
dev = &sh->dev[i];
- clear_bit(R5_Insync, &dev->flags);
pr_debug("check %d: state 0x%lx toread %p read %p write %p "
"written %p\n", i, dev->flags, dev->toread, dev->read,
@@ -3000,17 +3067,27 @@
blocked_rdev = rdev;
atomic_inc(&rdev->nr_pending);
}
- if (!rdev || !test_bit(In_sync, &rdev->flags)) {
+ clear_bit(R5_Insync, &dev->flags);
+ if (!rdev)
+ /* Not in-sync */;
+ else if (test_bit(In_sync, &rdev->flags))
+ set_bit(R5_Insync, &dev->flags);
+ else {
+ /* could be in-sync depending on recovery/reshape status */
+ if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset)
+ set_bit(R5_Insync, &dev->flags);
+ }
+ if (!test_bit(R5_Insync, &dev->flags)) {
/* The ReadError flag will just be confusing now */
clear_bit(R5_ReadError, &dev->flags);
clear_bit(R5_ReWrite, &dev->flags);
}
- if (!rdev || !test_bit(In_sync, &rdev->flags)
- || test_bit(R5_ReadError, &dev->flags)) {
+ if (test_bit(R5_ReadError, &dev->flags))
+ clear_bit(R5_Insync, &dev->flags);
+ if (!test_bit(R5_Insync, &dev->flags)) {
s.failed++;
s.failed_num = i;
- } else
- set_bit(R5_Insync, &dev->flags);
+ }
}
rcu_read_unlock();
@@ -3244,7 +3321,6 @@
for (i=disks; i--; ) {
mdk_rdev_t *rdev;
dev = &sh->dev[i];
- clear_bit(R5_Insync, &dev->flags);
pr_debug("check %d: state 0x%lx read %p write %p written %p\n",
i, dev->flags, dev->toread, dev->towrite, dev->written);
@@ -3282,18 +3358,28 @@
blocked_rdev = rdev;
atomic_inc(&rdev->nr_pending);
}
- if (!rdev || !test_bit(In_sync, &rdev->flags)) {
+ clear_bit(R5_Insync, &dev->flags);
+ if (!rdev)
+ /* Not in-sync */;
+ else if (test_bit(In_sync, &rdev->flags))
+ set_bit(R5_Insync, &dev->flags);
+ else {
+ /* in sync if before recovery_offset */
+ if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset)
+ set_bit(R5_Insync, &dev->flags);
+ }
+ if (!test_bit(R5_Insync, &dev->flags)) {
/* The ReadError flag will just be confusing now */
clear_bit(R5_ReadError, &dev->flags);
clear_bit(R5_ReWrite, &dev->flags);
}
- if (!rdev || !test_bit(In_sync, &rdev->flags)
- || test_bit(R5_ReadError, &dev->flags)) {
+ if (test_bit(R5_ReadError, &dev->flags))
+ clear_bit(R5_Insync, &dev->flags);
+ if (!test_bit(R5_Insync, &dev->flags)) {
if (s.failed < 2)
r6s.failed_num[s.failed] = i;
s.failed++;
- } else
- set_bit(R5_Insync, &dev->flags);
+ }
}
rcu_read_unlock();
@@ -4645,7 +4731,7 @@
kfree(percpu->scribble);
pr_err("%s: failed memory allocation for cpu%ld\n",
__func__, cpu);
- return NOTIFY_BAD;
+ return notifier_from_errno(-ENOMEM);
}
break;
case CPU_DEAD:
@@ -4971,8 +5057,10 @@
list_for_each_entry(rdev, &mddev->disks, same_set) {
if (rdev->raid_disk < 0)
continue;
- if (test_bit(In_sync, &rdev->flags))
+ if (test_bit(In_sync, &rdev->flags)) {
working_disks++;
+ continue;
+ }
/* This disc is not fully in-sync. However if it
* just stored parity (beyond the recovery_offset),
* when we don't need to be concerned about the
@@ -5005,7 +5093,7 @@
mddev->degraded = (max(conf->raid_disks, conf->previous_raid_disks)
- working_disks);
- if (mddev->degraded > conf->max_degraded) {
+ if (has_failed(conf)) {
printk(KERN_ERR "md/raid:%s: not enough operational devices"
" (%d/%d failed)\n",
mdname(mddev), mddev->degraded, conf->raid_disks);
@@ -5207,6 +5295,7 @@
for (i = 0; i < conf->raid_disks; i++) {
tmp = conf->disks + i;
if (tmp->rdev
+ && tmp->rdev->recovery_offset == MaxSector
&& !test_bit(Faulty, &tmp->rdev->flags)
&& !test_and_set_bit(In_sync, &tmp->rdev->flags)) {
unsigned long flags;
@@ -5242,7 +5331,7 @@
* isn't possible.
*/
if (!test_bit(Faulty, &rdev->flags) &&
- mddev->degraded <= conf->max_degraded &&
+ !has_failed(conf) &&
number < conf->raid_disks) {
err = -EBUSY;
goto abort;
@@ -5270,7 +5359,7 @@
int first = 0;
int last = conf->raid_disks - 1;
- if (mddev->degraded > conf->max_degraded)
+ if (has_failed(conf))
/* no point adding a device */
return -EINVAL;
@@ -5362,7 +5451,7 @@
if (mddev->bitmap)
/* Cannot grow a bitmap yet */
return -EBUSY;
- if (mddev->degraded > conf->max_degraded)
+ if (has_failed(conf))
return -EINVAL;
if (mddev->delta_disks < 0) {
/* We might be able to shrink, but the devices must
@@ -5437,8 +5526,13 @@
/* Add some new drives, as many as will fit.
* We know there are enough to make the newly sized array work.
+ * Don't add devices if we are reducing the number of
+ * devices in the array. This is because it is not possible
+ * to correctly record the "partially reconstructed" state of
+ * such devices during the reshape and confusion could result.
*/
- list_for_each_entry(rdev, &mddev->disks, same_set)
+ if (mddev->delta_disks >= 0)
+ list_for_each_entry(rdev, &mddev->disks, same_set)
if (rdev->raid_disk < 0 &&
!test_bit(Faulty, &rdev->flags)) {
if (raid5_add_disk(mddev, rdev) == 0) {
@@ -5460,7 +5554,7 @@
}
/* When a reshape changes the number of devices, ->degraded
- * is measured against the large of the pre and post number of
+ * is measured against the larger of the pre and post number of
* devices.*/
if (mddev->delta_disks > 0) {
spin_lock_irqsave(&conf->device_lock, flags);
diff --git a/drivers/media/IR/Kconfig b/drivers/media/IR/Kconfig
index 195c6cf..d22a8ec 100644
--- a/drivers/media/IR/Kconfig
+++ b/drivers/media/IR/Kconfig
@@ -13,6 +13,7 @@
config IR_NEC_DECODER
tristate "Enable IR raw decoder for the NEC protocol"
depends on IR_CORE
+ select BITREVERSE
default y
---help---
@@ -22,6 +23,7 @@
config IR_RC5_DECODER
tristate "Enable IR raw decoder for the RC-5 protocol"
depends on IR_CORE
+ select BITREVERSE
default y
---help---
diff --git a/drivers/media/IR/imon.c b/drivers/media/IR/imon.c
index 5e20456..4bbd45f 100644
--- a/drivers/media/IR/imon.c
+++ b/drivers/media/IR/imon.c
@@ -94,6 +94,7 @@
bool display_supported; /* not all controllers do */
bool display_isopen; /* display port has been opened */
+ bool rf_device; /* true if iMON 2.4G LT/DT RF device */
bool rf_isassociating; /* RF remote associating */
bool dev_present_intf0; /* USB device presence, interface 0 */
bool dev_present_intf1; /* USB device presence, interface 1 */
@@ -385,7 +386,7 @@
err("%s: display port is already open", __func__);
retval = -EBUSY;
} else {
- ictx->display_isopen = 1;
+ ictx->display_isopen = true;
file->private_data = ictx;
dev_dbg(ictx->dev, "display port opened\n");
}
@@ -422,7 +423,7 @@
err("%s: display is not open", __func__);
retval = -EIO;
} else {
- ictx->display_isopen = 0;
+ ictx->display_isopen = false;
dev_dbg(ictx->dev, "display port closed\n");
if (!ictx->dev_present_intf0) {
/*
@@ -491,12 +492,12 @@
}
init_completion(&ictx->tx.finished);
- ictx->tx.busy = 1;
+ ictx->tx.busy = true;
smp_rmb(); /* ensure later readers know we're busy */
retval = usb_submit_urb(ictx->tx_urb, GFP_KERNEL);
if (retval) {
- ictx->tx.busy = 0;
+ ictx->tx.busy = false;
smp_rmb(); /* ensure later readers know we're not busy */
err("%s: error submitting urb(%d)", __func__, retval);
} else {
@@ -682,7 +683,7 @@
return -ENODEV;
mutex_lock(&ictx->lock);
- ictx->rf_isassociating = 1;
+ ictx->rf_isassociating = true;
send_associate_24g(ictx);
mutex_unlock(&ictx->lock);
@@ -950,7 +951,7 @@
ictx->tx.status = urb->status;
/* notify waiters that write has finished */
- ictx->tx.busy = 0;
+ ictx->tx.busy = false;
smp_rmb(); /* ensure later readers know we're not busy */
complete(&ictx->tx.finished);
}
@@ -1215,7 +1216,7 @@
{
char rel_x = 0x00, rel_y = 0x00;
u8 right_shift = 1;
- bool mouse_input = 1;
+ bool mouse_input = true;
int dir = 0;
/* newer iMON device PAD or mouse button */
@@ -1246,7 +1247,7 @@
} else if (ictx->kc == KEY_CHANNELDOWN && (buf[2] & 0x40) != 0x40) {
dir = -1;
} else
- mouse_input = 0;
+ mouse_input = false;
if (mouse_input) {
dev_dbg(ictx->dev, "sending mouse data via input subsystem\n");
@@ -1450,7 +1451,7 @@
unsigned char *buf = urb->transfer_buffer;
struct device *dev = ictx->dev;
u32 kc;
- bool norelease = 0;
+ bool norelease = false;
int i;
u64 temp_key;
u64 panel_key = 0;
@@ -1465,7 +1466,7 @@
idev = ictx->idev;
/* filter out junk data on the older 0xffdc imon devices */
- if ((buf[0] == 0xff) && (buf[7] == 0xff))
+ if ((buf[0] == 0xff) && (buf[1] == 0xff) && (buf[2] == 0xff))
return;
/* Figure out what key was pressed */
@@ -1517,7 +1518,7 @@
!(buf[1] & 0x1 || buf[1] >> 2 & 0x1))) {
len = 8;
imon_pad_to_keys(ictx, buf);
- norelease = 1;
+ norelease = true;
}
if (debug) {
@@ -1580,7 +1581,7 @@
(buf[6] == 0x5E && buf[7] == 0xDF))) { /* DT */
dev_warn(dev, "%s: remote associated refid=%02X\n",
__func__, buf[1]);
- ictx->rf_isassociating = 0;
+ ictx->rf_isassociating = false;
}
}
@@ -1790,9 +1791,9 @@
int ifnum = iface_desc->desc.bInterfaceNumber;
int num_endpts = iface_desc->desc.bNumEndpoints;
int i, ep_dir, ep_type;
- bool ir_ep_found = 0;
- bool display_ep_found = 0;
- bool tx_control = 0;
+ bool ir_ep_found = false;
+ bool display_ep_found = false;
+ bool tx_control = false;
/*
* Scan the endpoint list and set:
@@ -1808,13 +1809,13 @@
ep_type == USB_ENDPOINT_XFER_INT) {
rx_endpoint = ep;
- ir_ep_found = 1;
+ ir_ep_found = true;
dev_dbg(ictx->dev, "%s: found IR endpoint\n", __func__);
} else if (!display_ep_found && ep_dir == USB_DIR_OUT &&
ep_type == USB_ENDPOINT_XFER_INT) {
tx_endpoint = ep;
- display_ep_found = 1;
+ display_ep_found = true;
dev_dbg(ictx->dev, "%s: found display endpoint\n", __func__);
}
}
@@ -1835,8 +1836,8 @@
* newer iMON devices that use control urb instead of interrupt
*/
if (!display_ep_found) {
- tx_control = 1;
- display_ep_found = 1;
+ tx_control = true;
+ display_ep_found = true;
dev_dbg(ictx->dev, "%s: device uses control endpoint, not "
"interface OUT endpoint\n", __func__);
}
@@ -1847,7 +1848,7 @@
* and without... :\
*/
if (ictx->display_type == IMON_DISPLAY_TYPE_NONE) {
- display_ep_found = 0;
+ display_ep_found = false;
dev_dbg(ictx->dev, "%s: device has no display\n", __func__);
}
@@ -1856,7 +1857,7 @@
* that refers to e.g. /dev/lcd0 (a character device LCD or VFD).
*/
if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
- display_ep_found = 0;
+ display_ep_found = false;
dev_dbg(ictx->dev, "%s: iMON Touch device found\n", __func__);
}
@@ -1905,9 +1906,10 @@
ictx->dev = dev;
ictx->usbdev_intf0 = usb_get_dev(interface_to_usbdev(intf));
- ictx->dev_present_intf0 = 1;
+ ictx->dev_present_intf0 = true;
ictx->rx_urb_intf0 = rx_urb;
ictx->tx_urb = tx_urb;
+ ictx->rf_device = false;
ictx->vendor = le16_to_cpu(ictx->usbdev_intf0->descriptor.idVendor);
ictx->product = le16_to_cpu(ictx->usbdev_intf0->descriptor.idProduct);
@@ -1979,7 +1981,7 @@
}
ictx->usbdev_intf1 = usb_get_dev(interface_to_usbdev(intf));
- ictx->dev_present_intf1 = 1;
+ ictx->dev_present_intf1 = true;
ictx->rx_urb_intf1 = rx_urb;
ret = -ENODEV;
@@ -2047,6 +2049,12 @@
dev_info(ictx->dev, "0xffdc iMON Knob, iMON IR");
ictx->display_supported = false;
break;
+ /* iMON 2.4G LT (usb stick), no display, iMON RF */
+ case 0x4e:
+ dev_info(ictx->dev, "0xffdc iMON 2.4G LT, iMON RF");
+ ictx->display_supported = false;
+ ictx->rf_device = true;
+ break;
/* iMON VFD, no IR (does have vol knob tho) */
case 0x35:
dev_info(ictx->dev, "0xffdc iMON VFD + knob, no IR");
@@ -2197,15 +2205,6 @@
goto fail;
}
- if (product == 0xffdc) {
- /* RF products *also* use 0xffdc... sigh... */
- sysfs_err = sysfs_create_group(&interface->dev.kobj,
- &imon_rf_attribute_group);
- if (sysfs_err)
- err("%s: Could not create RF sysfs entries(%d)",
- __func__, sysfs_err);
- }
-
} else {
/* this is the secondary interface on the device */
ictx = imon_init_intf1(interface, first_if_ctx);
@@ -2233,6 +2232,14 @@
imon_set_display_type(ictx, interface);
+ if (product == 0xffdc && ictx->rf_device) {
+ sysfs_err = sysfs_create_group(&interface->dev.kobj,
+ &imon_rf_attribute_group);
+ if (sysfs_err)
+ err("%s: Could not create RF sysfs entries(%d)",
+ __func__, sysfs_err);
+ }
+
if (ictx->display_supported)
imon_init_display(ictx, interface);
}
@@ -2297,7 +2304,7 @@
}
if (ifnum == 0) {
- ictx->dev_present_intf0 = 0;
+ ictx->dev_present_intf0 = false;
usb_kill_urb(ictx->rx_urb_intf0);
input_unregister_device(ictx->idev);
if (ictx->display_supported) {
@@ -2307,7 +2314,7 @@
usb_deregister_dev(interface, &imon_vfd_class);
}
} else {
- ictx->dev_present_intf1 = 0;
+ ictx->dev_present_intf1 = false;
usb_kill_urb(ictx->rx_urb_intf1);
if (ictx->display_type == IMON_DISPLAY_TYPE_VGA)
input_unregister_device(ictx->touch);
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index 9374a00..94a8577 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -490,11 +490,12 @@
if (rc < 0)
goto out_table;
- if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) {
- rc = ir_raw_event_register(input_dev);
- if (rc < 0)
- goto out_event;
- }
+ if (ir_dev->props)
+ if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) {
+ rc = ir_raw_event_register(input_dev);
+ if (rc < 0)
+ goto out_event;
+ }
IR_dprintk(1, "Registered input device on %s for %s remote.\n",
driver_name, rc_tab->name);
@@ -530,8 +531,10 @@
IR_dprintk(1, "Freed keycode table\n");
del_timer_sync(&ir_dev->timer_keyup);
- if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW)
- ir_raw_event_unregister(input_dev);
+ if (ir_dev->props)
+ if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW)
+ ir_raw_event_unregister(input_dev);
+
rc_tab = &ir_dev->rc_tab;
rc_tab->size = 0;
kfree(rc_tab->scan);
diff --git a/drivers/media/IR/ir-sysfs.c b/drivers/media/IR/ir-sysfs.c
index d7da63e..2098dd1 100644
--- a/drivers/media/IR/ir-sysfs.c
+++ b/drivers/media/IR/ir-sysfs.c
@@ -221,9 +221,10 @@
if (unlikely(devno < 0))
return devno;
- if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
- ir_dev->dev.type = &rc_dev_type;
- else
+ if (ir_dev->props) {
+ if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
+ ir_dev->dev.type = &rc_dev_type;
+ } else
ir_dev->dev.type = &ir_raw_dev_type;
ir_dev->dev.class = &ir_input_class;
diff --git a/drivers/media/IR/keymaps/Makefile b/drivers/media/IR/keymaps/Makefile
index ec25258..aea649f 100644
--- a/drivers/media/IR/keymaps/Makefile
+++ b/drivers/media/IR/keymaps/Makefile
@@ -6,7 +6,8 @@
rc-avermedia.o \
rc-avermedia-cardbus.o \
rc-avermedia-dvbt.o \
- rc-avermedia-m135a-rm-jx.o \
+ rc-avermedia-m135a.o \
+ rc-avermedia-m733a-rm-k6.o \
rc-avertv-303.o \
rc-behold.o \
rc-behold-columbus.o \
diff --git a/drivers/media/IR/keymaps/rc-avermedia-m135a-rm-jx.c b/drivers/media/IR/keymaps/rc-avermedia-m135a-rm-jx.c
deleted file mode 100644
index 101e7ea..0000000
--- a/drivers/media/IR/keymaps/rc-avermedia-m135a-rm-jx.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/* avermedia-m135a-rm-jx.h - Keytable for avermedia_m135a_rm_jx Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * Avermedia M135A with IR model RM-JX
- * The same codes exist on both Positivo (BR) and original IR
- * Mauro Carvalho Chehab <mchehab@infradead.org>
- */
-
-static struct ir_scancode avermedia_m135a_rm_jx[] = {
- { 0x0200, KEY_POWER2 },
- { 0x022e, KEY_DOT }, /* '.' */
- { 0x0201, KEY_MODE }, /* TV/FM or SOURCE */
-
- { 0x0205, KEY_1 },
- { 0x0206, KEY_2 },
- { 0x0207, KEY_3 },
- { 0x0209, KEY_4 },
- { 0x020a, KEY_5 },
- { 0x020b, KEY_6 },
- { 0x020d, KEY_7 },
- { 0x020e, KEY_8 },
- { 0x020f, KEY_9 },
- { 0x0211, KEY_0 },
-
- { 0x0213, KEY_RIGHT }, /* -> or L */
- { 0x0212, KEY_LEFT }, /* <- or R */
-
- { 0x0217, KEY_SLEEP }, /* Capturar Imagem or Snapshot */
- { 0x0210, KEY_SHUFFLE }, /* Amostra or 16 chan prev */
-
- { 0x0303, KEY_CHANNELUP },
- { 0x0302, KEY_CHANNELDOWN },
- { 0x021f, KEY_VOLUMEUP },
- { 0x021e, KEY_VOLUMEDOWN },
- { 0x020c, KEY_ENTER }, /* Full Screen */
-
- { 0x0214, KEY_MUTE },
- { 0x0208, KEY_AUDIO },
-
- { 0x0203, KEY_TEXT }, /* Teletext */
- { 0x0204, KEY_EPG },
- { 0x022b, KEY_TV2 }, /* TV2 or PIP */
-
- { 0x021d, KEY_RED },
- { 0x021c, KEY_YELLOW },
- { 0x0301, KEY_GREEN },
- { 0x0300, KEY_BLUE },
-
- { 0x021a, KEY_PLAYPAUSE },
- { 0x0219, KEY_RECORD },
- { 0x0218, KEY_PLAY },
- { 0x021b, KEY_STOP },
-};
-
-static struct rc_keymap avermedia_m135a_rm_jx_map = {
- .map = {
- .scan = avermedia_m135a_rm_jx,
- .size = ARRAY_SIZE(avermedia_m135a_rm_jx),
- .ir_type = IR_TYPE_NEC,
- .name = RC_MAP_AVERMEDIA_M135A_RM_JX,
- }
-};
-
-static int __init init_rc_map_avermedia_m135a_rm_jx(void)
-{
- return ir_register_map(&avermedia_m135a_rm_jx_map);
-}
-
-static void __exit exit_rc_map_avermedia_m135a_rm_jx(void)
-{
- ir_unregister_map(&avermedia_m135a_rm_jx_map);
-}
-
-module_init(init_rc_map_avermedia_m135a_rm_jx)
-module_exit(exit_rc_map_avermedia_m135a_rm_jx)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-avermedia-m135a.c b/drivers/media/IR/keymaps/rc-avermedia-m135a.c
new file mode 100644
index 0000000..e4471fb
--- /dev/null
+++ b/drivers/media/IR/keymaps/rc-avermedia-m135a.c
@@ -0,0 +1,147 @@
+/* avermedia-m135a.c - Keytable for Avermedia M135A Remote Controllers
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ * Copyright (c) 2010 by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Avermedia M135A with RM-JX and RM-K6 remote controls
+ *
+ * On Avermedia M135A with IR model RM-JX, the same codes exist on both
+ * Positivo (BR) and original IR, initial version and remote control codes
+ * added by Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ * Positivo also ships Avermedia M135A with model RM-K6, extra control
+ * codes added by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ */
+
+static struct ir_scancode avermedia_m135a[] = {
+ /* RM-JX */
+ { 0x0200, KEY_POWER2 },
+ { 0x022e, KEY_DOT }, /* '.' */
+ { 0x0201, KEY_MODE }, /* TV/FM or SOURCE */
+
+ { 0x0205, KEY_1 },
+ { 0x0206, KEY_2 },
+ { 0x0207, KEY_3 },
+ { 0x0209, KEY_4 },
+ { 0x020a, KEY_5 },
+ { 0x020b, KEY_6 },
+ { 0x020d, KEY_7 },
+ { 0x020e, KEY_8 },
+ { 0x020f, KEY_9 },
+ { 0x0211, KEY_0 },
+
+ { 0x0213, KEY_RIGHT }, /* -> or L */
+ { 0x0212, KEY_LEFT }, /* <- or R */
+
+ { 0x0217, KEY_SLEEP }, /* Capturar Imagem or Snapshot */
+ { 0x0210, KEY_SHUFFLE }, /* Amostra or 16 chan prev */
+
+ { 0x0303, KEY_CHANNELUP },
+ { 0x0302, KEY_CHANNELDOWN },
+ { 0x021f, KEY_VOLUMEUP },
+ { 0x021e, KEY_VOLUMEDOWN },
+ { 0x020c, KEY_ENTER }, /* Full Screen */
+
+ { 0x0214, KEY_MUTE },
+ { 0x0208, KEY_AUDIO },
+
+ { 0x0203, KEY_TEXT }, /* Teletext */
+ { 0x0204, KEY_EPG },
+ { 0x022b, KEY_TV2 }, /* TV2 or PIP */
+
+ { 0x021d, KEY_RED },
+ { 0x021c, KEY_YELLOW },
+ { 0x0301, KEY_GREEN },
+ { 0x0300, KEY_BLUE },
+
+ { 0x021a, KEY_PLAYPAUSE },
+ { 0x0219, KEY_RECORD },
+ { 0x0218, KEY_PLAY },
+ { 0x021b, KEY_STOP },
+
+ /* RM-K6 */
+ { 0x0401, KEY_POWER2 },
+ { 0x0406, KEY_MUTE },
+ { 0x0408, KEY_MODE }, /* TV/FM */
+
+ { 0x0409, KEY_1 },
+ { 0x040a, KEY_2 },
+ { 0x040b, KEY_3 },
+ { 0x040c, KEY_4 },
+ { 0x040d, KEY_5 },
+ { 0x040e, KEY_6 },
+ { 0x040f, KEY_7 },
+ { 0x0410, KEY_8 },
+ { 0x0411, KEY_9 },
+ { 0x044c, KEY_DOT }, /* '.' */
+ { 0x0412, KEY_0 },
+ { 0x0407, KEY_REFRESH }, /* Refresh/Reload */
+
+ { 0x0413, KEY_AUDIO },
+ { 0x0440, KEY_SCREEN }, /* Full Screen toggle */
+ { 0x0441, KEY_HOME },
+ { 0x0442, KEY_BACK },
+ { 0x0447, KEY_UP },
+ { 0x0448, KEY_DOWN },
+ { 0x0449, KEY_LEFT },
+ { 0x044a, KEY_RIGHT },
+ { 0x044b, KEY_OK },
+ { 0x0404, KEY_VOLUMEUP },
+ { 0x0405, KEY_VOLUMEDOWN },
+ { 0x0402, KEY_CHANNELUP },
+ { 0x0403, KEY_CHANNELDOWN },
+
+ { 0x0443, KEY_RED },
+ { 0x0444, KEY_GREEN },
+ { 0x0445, KEY_YELLOW },
+ { 0x0446, KEY_BLUE },
+
+ { 0x0414, KEY_TEXT },
+ { 0x0415, KEY_EPG },
+ { 0x041a, KEY_TV2 }, /* PIP */
+ { 0x041b, KEY_MHP }, /* Snapshot */
+
+ { 0x0417, KEY_RECORD },
+ { 0x0416, KEY_PLAYPAUSE },
+ { 0x0418, KEY_STOP },
+ { 0x0419, KEY_PAUSE },
+
+ { 0x041f, KEY_PREVIOUS },
+ { 0x041c, KEY_REWIND },
+ { 0x041d, KEY_FORWARD },
+ { 0x041e, KEY_NEXT },
+};
+
+static struct rc_keymap avermedia_m135a_map = {
+ .map = {
+ .scan = avermedia_m135a,
+ .size = ARRAY_SIZE(avermedia_m135a),
+ .ir_type = IR_TYPE_NEC,
+ .name = RC_MAP_AVERMEDIA_M135A,
+ }
+};
+
+static int __init init_rc_map_avermedia_m135a(void)
+{
+ return ir_register_map(&avermedia_m135a_map);
+}
+
+static void __exit exit_rc_map_avermedia_m135a(void)
+{
+ ir_unregister_map(&avermedia_m135a_map);
+}
+
+module_init(init_rc_map_avermedia_m135a)
+module_exit(exit_rc_map_avermedia_m135a)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-avermedia-m733a-rm-k6.c b/drivers/media/IR/keymaps/rc-avermedia-m733a-rm-k6.c
new file mode 100644
index 0000000..cf8d457
--- /dev/null
+++ b/drivers/media/IR/keymaps/rc-avermedia-m733a-rm-k6.c
@@ -0,0 +1,95 @@
+/* avermedia-m733a-rm-k6.h - Keytable for avermedia_m733a_rm_k6 Remote Controller
+ *
+ * Copyright (c) 2010 by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Avermedia M733A with IR model RM-K6
+ * This is the stock remote controller used with Positivo machines with M733A
+ * Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ */
+
+static struct ir_scancode avermedia_m733a_rm_k6[] = {
+ { 0x0401, KEY_POWER2 },
+ { 0x0406, KEY_MUTE },
+ { 0x0408, KEY_MODE }, /* TV/FM */
+
+ { 0x0409, KEY_1 },
+ { 0x040a, KEY_2 },
+ { 0x040b, KEY_3 },
+ { 0x040c, KEY_4 },
+ { 0x040d, KEY_5 },
+ { 0x040e, KEY_6 },
+ { 0x040f, KEY_7 },
+ { 0x0410, KEY_8 },
+ { 0x0411, KEY_9 },
+ { 0x044c, KEY_DOT }, /* '.' */
+ { 0x0412, KEY_0 },
+ { 0x0407, KEY_REFRESH }, /* Refresh/Reload */
+
+ { 0x0413, KEY_AUDIO },
+ { 0x0440, KEY_SCREEN }, /* Full Screen toggle */
+ { 0x0441, KEY_HOME },
+ { 0x0442, KEY_BACK },
+ { 0x0447, KEY_UP },
+ { 0x0448, KEY_DOWN },
+ { 0x0449, KEY_LEFT },
+ { 0x044a, KEY_RIGHT },
+ { 0x044b, KEY_OK },
+ { 0x0404, KEY_VOLUMEUP },
+ { 0x0405, KEY_VOLUMEDOWN },
+ { 0x0402, KEY_CHANNELUP },
+ { 0x0403, KEY_CHANNELDOWN },
+
+ { 0x0443, KEY_RED },
+ { 0x0444, KEY_GREEN },
+ { 0x0445, KEY_YELLOW },
+ { 0x0446, KEY_BLUE },
+
+ { 0x0414, KEY_TEXT },
+ { 0x0415, KEY_EPG },
+ { 0x041a, KEY_TV2 }, /* PIP */
+ { 0x041b, KEY_MHP }, /* Snapshot */
+
+ { 0x0417, KEY_RECORD },
+ { 0x0416, KEY_PLAYPAUSE },
+ { 0x0418, KEY_STOP },
+ { 0x0419, KEY_PAUSE },
+
+ { 0x041f, KEY_PREVIOUS },
+ { 0x041c, KEY_REWIND },
+ { 0x041d, KEY_FORWARD },
+ { 0x041e, KEY_NEXT },
+};
+
+static struct rc_keymap avermedia_m733a_rm_k6_map = {
+ .map = {
+ .scan = avermedia_m733a_rm_k6,
+ .size = ARRAY_SIZE(avermedia_m733a_rm_k6),
+ .ir_type = IR_TYPE_NEC,
+ .name = RC_MAP_AVERMEDIA_M733A_RM_K6,
+ }
+};
+
+static int __init init_rc_map_avermedia_m733a_rm_k6(void)
+{
+ return ir_register_map(&avermedia_m733a_rm_k6_map);
+}
+
+static void __exit exit_rc_map_avermedia_m733a_rm_k6(void)
+{
+ ir_unregister_map(&avermedia_m733a_rm_k6_map);
+}
+
+module_init(init_rc_map_avermedia_m733a_rm_k6)
+module_exit(exit_rc_map_avermedia_m733a_rm_k6)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c
index 8abbcc5..8cf2ab6 100644
--- a/drivers/media/common/tuners/tuner-simple.c
+++ b/drivers/media/common/tuners/tuner-simple.c
@@ -524,6 +524,7 @@
buffer[3] = 0x39;
break;
case TUNER_PHILIPS_FQ1216LME_MK3:
+ case TUNER_PHILIPS_FQ1236_MK5:
tuner_err("This tuner doesn't have FM\n");
/* Set the low band for sanity, since it covers 88-108 MHz */
buffer[3] = 0x01;
diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c
index d9aaaca..58a513b 100644
--- a/drivers/media/common/tuners/tuner-types.c
+++ b/drivers/media/common/tuners/tuner-types.c
@@ -1353,6 +1353,17 @@
},
};
+/* ------------ TUNER_PHILIPS_FQ1236_MK5 - Philips NTSC ------------ */
+
+static struct tuner_params tuner_philips_fq1236_mk5_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_fm1236_mk3_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_fm1236_mk3_ntsc_ranges),
+ .has_tda9887 = 1, /* TDA9885, no FM radio */
+ },
+};
+
/* --------------------------------------------------------------------- */
struct tunertype tuners[] = {
@@ -1826,6 +1837,11 @@
.params = tuner_sony_btf_pxn01z_params,
.count = ARRAY_SIZE(tuner_sony_btf_pxn01z_params),
},
+ [TUNER_PHILIPS_FQ1236_MK5] = { /* NTSC, TDA9885, no FM radio */
+ .name = "Philips FQ1236 MK5",
+ .params = tuner_philips_fq1236_mk5_params,
+ .count = ARRAY_SIZE(tuner_philips_fq1236_mk5_params),
+ },
};
EXPORT_SYMBOL(tuners);
diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c
index b762e56..bca07c0 100644
--- a/drivers/media/dvb/dm1105/dm1105.c
+++ b/drivers/media/dvb/dm1105/dm1105.c
@@ -594,7 +594,7 @@
int __devinit dm1105_ir_init(struct dm1105_dev *dm1105)
{
struct input_dev *input_dev;
- char *ir_codes = NULL;
+ char *ir_codes = RC_MAP_DM1105_NEC;
int err = -ENOMEM;
input_dev = input_allocate_device();
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index f6dac2b..6c3a8a0 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -351,6 +351,7 @@
const u8 *ts, *ts_end, *from_where = NULL;
u8 ts_remain = 0, how_much = 0, new_ts = 1;
struct ethhdr *ethh = NULL;
+ bool error = false;
#ifdef ULE_DEBUG
/* The code inside ULE_DEBUG keeps a history of the last 100 TS cells processed. */
@@ -460,10 +461,16 @@
/* Drop partly decoded SNDU, reset state, resync on PUSI. */
if (priv->ule_skb) {
- dev_kfree_skb( priv->ule_skb );
+ error = true;
+ dev_kfree_skb(priv->ule_skb);
+ }
+
+ if (error || priv->ule_sndu_remain) {
dev->stats.rx_errors++;
dev->stats.rx_frame_errors++;
+ error = false;
}
+
reset_ule(priv);
priv->need_pusi = 1;
continue;
@@ -535,6 +542,7 @@
from_where += 2;
}
+ priv->ule_sndu_remain = priv->ule_sndu_len + 2;
/*
* State of current TS:
* ts_remain (remaining bytes in the current TS cell)
@@ -544,6 +552,7 @@
*/
switch (ts_remain) {
case 1:
+ priv->ule_sndu_remain--;
priv->ule_sndu_type = from_where[0] << 8;
priv->ule_sndu_type_1 = 1; /* first byte of ule_type is set. */
ts_remain -= 1; from_where += 1;
@@ -557,6 +566,7 @@
default: /* complete ULE header is present in current TS. */
/* Extract ULE type field. */
if (priv->ule_sndu_type_1) {
+ priv->ule_sndu_type_1 = 0;
priv->ule_sndu_type |= from_where[0];
from_where += 1; /* points to payload start. */
ts_remain -= 1;
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index e5f91f1..553b48a 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -76,6 +76,7 @@
select DVB_S5H1411 if !DVB_FE_CUSTOMISE
select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
+ select DVB_TUNER_DIB0090 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
@@ -134,6 +135,7 @@
select DVB_TDA1004X if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE
+ select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
help
Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
Currently, only devices with a product id of
@@ -264,7 +266,7 @@
select DVB_STB6000 if !DVB_FE_CUSTOMISE
select DVB_CX24116 if !DVB_FE_CUSTOMISE
select DVB_SI21XX if !DVB_FE_CUSTOMISE
- select DVB_TDA10021 if !DVB_FE_CUSTOMISE
+ select DVB_TDA10023 if !DVB_FE_CUSTOMISE
select DVB_MT312 if !DVB_FE_CUSTOMISE
select DVB_ZL10039 if !DVB_FE_CUSTOMISE
select DVB_DS3000 if !DVB_FE_CUSTOMISE
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 0eb4908..11e9e85 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -1026,8 +1026,10 @@
cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1);
if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
- &cxusb_dualdig4_rev2_config) < 0)
+ &cxusb_dualdig4_rev2_config) < 0) {
+ printk(KERN_WARNING "Unable to enumerate dib7000p\n");
return -ENODEV;
+ }
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
&cxusb_dualdig4_rev2_config);
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 085c4e4..b4afe6f 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -198,6 +198,7 @@
#define USB_PID_AVERMEDIA_A850 0x850a
#define USB_PID_AVERMEDIA_A805 0xa805
#define USB_PID_TECHNOTREND_CONNECT_S2400 0x3006
+#define USB_PID_TECHNOTREND_CONNECT_CT3650 0x300d
#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a
#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2 0x0081
#define USB_PID_TERRATEC_CINERGY_HT_USB_XE 0x0058
diff --git a/drivers/media/dvb/dvb-usb/ttusb2.c b/drivers/media/dvb/dvb-usb/ttusb2.c
index 20ca9d9..a6de489 100644
--- a/drivers/media/dvb/dvb-usb/ttusb2.c
+++ b/drivers/media/dvb/dvb-usb/ttusb2.c
@@ -29,6 +29,8 @@
#include "tda826x.h"
#include "tda10086.h"
+#include "tda1002x.h"
+#include "tda827x.h"
#include "lnbp21.h"
/* debug */
@@ -150,7 +152,17 @@
.xtal_freq = TDA10086_XTAL_16M,
};
-static int ttusb2_frontend_attach(struct dvb_usb_adapter *adap)
+static struct tda10023_config tda10023_config = {
+ .demod_address = 0x0c,
+ .invert = 0,
+ .xtal = 16000000,
+ .pll_m = 11,
+ .pll_p = 3,
+ .pll_n = 1,
+ .deltaf = 0xa511,
+};
+
+static int ttusb2_frontend_tda10086_attach(struct dvb_usb_adapter *adap)
{
if (usb_set_interface(adap->dev->udev,0,3) < 0)
err("set interface to alts=3 failed");
@@ -163,7 +175,27 @@
return 0;
}
-static int ttusb2_tuner_attach(struct dvb_usb_adapter *adap)
+static int ttusb2_frontend_tda10023_attach(struct dvb_usb_adapter *adap)
+{
+ if (usb_set_interface(adap->dev->udev, 0, 3) < 0)
+ err("set interface to alts=3 failed");
+ if ((adap->fe = dvb_attach(tda10023_attach, &tda10023_config, &adap->dev->i2c_adap, 0x48)) == NULL) {
+ deb_info("TDA10023 attach failed\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static int ttusb2_tuner_tda827x_attach(struct dvb_usb_adapter *adap)
+{
+ if (dvb_attach(tda827x_attach, adap->fe, 0x61, &adap->dev->i2c_adap, NULL) == NULL) {
+ printk(KERN_ERR "%s: No tda827x found!\n", __func__);
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static int ttusb2_tuner_tda826x_attach(struct dvb_usb_adapter *adap)
{
if (dvb_attach(tda826x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, 0) == NULL) {
deb_info("TDA8263 attach failed\n");
@@ -180,6 +212,7 @@
/* DVB USB Driver stuff */
static struct dvb_usb_device_properties ttusb2_properties;
static struct dvb_usb_device_properties ttusb2_properties_s2400;
+static struct dvb_usb_device_properties ttusb2_properties_ct3650;
static int ttusb2_probe(struct usb_interface *intf,
const struct usb_device_id *id)
@@ -187,6 +220,8 @@
if (0 == dvb_usb_device_init(intf, &ttusb2_properties,
THIS_MODULE, NULL, adapter_nr) ||
0 == dvb_usb_device_init(intf, &ttusb2_properties_s2400,
+ THIS_MODULE, NULL, adapter_nr) ||
+ 0 == dvb_usb_device_init(intf, &ttusb2_properties_ct3650,
THIS_MODULE, NULL, adapter_nr))
return 0;
return -ENODEV;
@@ -197,6 +232,8 @@
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_450E) },
{ USB_DEVICE(USB_VID_TECHNOTREND,
USB_PID_TECHNOTREND_CONNECT_S2400) },
+ { USB_DEVICE(USB_VID_TECHNOTREND,
+ USB_PID_TECHNOTREND_CONNECT_CT3650) },
{} /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, ttusb2_table);
@@ -214,8 +251,8 @@
{
.streaming_ctrl = NULL, // ttusb2_streaming_ctrl,
- .frontend_attach = ttusb2_frontend_attach,
- .tuner_attach = ttusb2_tuner_attach,
+ .frontend_attach = ttusb2_frontend_tda10086_attach,
+ .tuner_attach = ttusb2_tuner_tda826x_attach,
/* parameter for the MPEG2-data transfer */
.stream = {
@@ -266,8 +303,8 @@
{
.streaming_ctrl = NULL,
- .frontend_attach = ttusb2_frontend_attach,
- .tuner_attach = ttusb2_tuner_attach,
+ .frontend_attach = ttusb2_frontend_tda10086_attach,
+ .tuner_attach = ttusb2_tuner_tda826x_attach,
/* parameter for the MPEG2-data transfer */
.stream = {
@@ -301,6 +338,52 @@
}
};
+static struct dvb_usb_device_properties ttusb2_properties_ct3650 = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+ .usb_ctrl = CYPRESS_FX2,
+
+ .size_of_priv = sizeof(struct ttusb2_state),
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .streaming_ctrl = NULL,
+
+ .frontend_attach = ttusb2_frontend_tda10023_attach,
+ .tuner_attach = ttusb2_tuner_tda827x_attach,
+
+ /* parameter for the MPEG2-data transfer */
+ .stream = {
+ .type = USB_ISOC,
+ .count = 5,
+ .endpoint = 0x02,
+ .u = {
+ .isoc = {
+ .framesperurb = 4,
+ .framesize = 940,
+ .interval = 1,
+ }
+ }
+ }
+ },
+ },
+
+ .power_ctrl = ttusb2_power_ctrl,
+ .identify_state = ttusb2_identify_state,
+
+ .i2c_algo = &ttusb2_i2c_algo,
+
+ .generic_bulk_ctrl_endpoint = 0x01,
+
+ .num_device_descs = 1,
+ .devices = {
+ { "Technotrend TT-connect CT-3650",
+ .warm_ids = { &ttusb2_table[3], NULL },
+ },
+ }
+};
+
static struct usb_driver ttusb2_driver = {
.name = "dvb_usb_ttusb2",
.probe = ttusb2_probe,
diff --git a/drivers/media/dvb/firewire/firedtv-1394.c b/drivers/media/dvb/firewire/firedtv-1394.c
index 26333b4..b34ca7a 100644
--- a/drivers/media/dvb/firewire/firedtv-1394.c
+++ b/drivers/media/dvb/firewire/firedtv-1394.c
@@ -58,7 +58,7 @@
num = hpsb_iso_n_ready(iso);
if (!fdtv) {
- dev_err(fdtv->device, "received at unknown iso channel\n");
+ pr_err("received at unknown iso channel\n");
goto out;
}
diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c
index 68dba3a..29cdbfe 100644
--- a/drivers/media/dvb/frontends/au8522_decoder.c
+++ b/drivers/media/dvb/frontends/au8522_decoder.c
@@ -567,30 +567,6 @@
/* ----------------------------------------------------------------------- */
-static int au8522_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
- switch (fmt->type) {
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static int au8522_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
- switch (fmt->type) {
- case V4L2_BUF_TYPE_VIDEO_CAPTURE:
- /* Not yet implemented */
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
#ifdef CONFIG_VIDEO_ADV_DEBUG
static int au8522_g_register(struct v4l2_subdev *sd,
struct v4l2_dbg_register *reg)
@@ -772,8 +748,6 @@
static const struct v4l2_subdev_video_ops au8522_video_ops = {
.s_routing = au8522_s_video_routing,
- .g_fmt = au8522_g_fmt,
- .s_fmt = au8522_s_fmt,
.s_stream = au8522_s_stream,
};
diff --git a/drivers/media/dvb/frontends/ds3000.c b/drivers/media/dvb/frontends/ds3000.c
index 78001e8..fc61d92 100644
--- a/drivers/media/dvb/frontends/ds3000.c
+++ b/drivers/media/dvb/frontends/ds3000.c
@@ -969,15 +969,12 @@
dprintk("%s\n", __func__);
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct ds3000_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct ds3000_state), GFP_KERNEL);
if (state == NULL) {
printk(KERN_ERR "Unable to kmalloc\n");
goto error2;
}
- /* setup the state */
- memset(state, 0, sizeof(struct ds3000_state));
-
state->config = config;
state->i2c = i2c;
state->prevUCBS2 = 0;
diff --git a/drivers/media/dvb/frontends/stv6110x.c b/drivers/media/dvb/frontends/stv6110x.c
index 42591ce..f36cab1 100644
--- a/drivers/media/dvb/frontends/stv6110x.c
+++ b/drivers/media/dvb/frontends/stv6110x.c
@@ -303,7 +303,10 @@
static int stv6110x_sleep(struct dvb_frontend *fe)
{
- return stv6110x_set_mode(fe, TUNER_SLEEP);
+ if (fe->tuner_priv)
+ return stv6110x_set_mode(fe, TUNER_SLEEP);
+
+ return 0;
}
static int stv6110x_get_status(struct dvb_frontend *fe, u32 *status)
diff --git a/drivers/media/dvb/ngene/ngene-cards.c b/drivers/media/dvb/ngene/ngene-cards.c
index 692c3e22..4692a41 100644
--- a/drivers/media/dvb/ngene/ngene-cards.c
+++ b/drivers/media/dvb/ngene/ngene-cards.c
@@ -217,6 +217,19 @@
.fw_version = 15,
};
+static struct ngene_info ngene_info_duoFlexS2 = {
+ .type = NGENE_SIDEWINDER,
+ .name = "Digital Devices DuoFlex S2 miniPCIe",
+ .io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN},
+ .demod_attach = {demod_attach_stv0900, demod_attach_stv0900},
+ .tuner_attach = {tuner_attach_stv6110, tuner_attach_stv6110},
+ .fe_config = {&fe_cineS2, &fe_cineS2},
+ .tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1},
+ .lnb = {0x0a, 0x08},
+ .tsf = {3, 3},
+ .fw_version = 15,
+};
+
static struct ngene_info ngene_info_m780 = {
.type = NGENE_APP,
.name = "Aver M780 ATSC/QAM-B",
@@ -256,6 +269,8 @@
NGENE_ID(0x18c3, 0xdb01, ngene_info_satixS2),
NGENE_ID(0x18c3, 0xdb02, ngene_info_satixS2v2),
NGENE_ID(0x18c3, 0xdd00, ngene_info_cineS2v5),
+ NGENE_ID(0x18c3, 0xdd10, ngene_info_duoFlexS2),
+ NGENE_ID(0x18c3, 0xdd20, ngene_info_duoFlexS2),
NGENE_ID(0x1461, 0x062e, ngene_info_m780),
{0}
};
diff --git a/drivers/media/dvb/ngene/ngene-core.c b/drivers/media/dvb/ngene/ngene-core.c
index c8b4dfa..4caeb16 100644
--- a/drivers/media/dvb/ngene/ngene-core.c
+++ b/drivers/media/dvb/ngene/ngene-core.c
@@ -53,8 +53,6 @@
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-#define COMMAND_TIMEOUT_WORKAROUND
-
#define dprintk if (debug) printk
#define ngwriteb(dat, adr) writeb((dat), (char *)(dev->iomem + (adr)))
@@ -147,24 +145,24 @@
} else {
if (chan->HWState == HWSTATE_RUN) {
u32 Flags = 0;
+ IBufferExchange *exch1 = chan->pBufferExchange;
+ IBufferExchange *exch2 = chan->pBufferExchange2;
if (Cur->ngeneBuffer.SR.Flags & 0x01)
Flags |= BEF_EVEN_FIELD;
if (Cur->ngeneBuffer.SR.Flags & 0x20)
Flags |= BEF_OVERFLOW;
- if (chan->pBufferExchange)
- chan->pBufferExchange(chan,
- Cur->Buffer1,
- chan->
- Capture1Length,
- Cur->ngeneBuffer.
- SR.Clock, Flags);
- if (chan->pBufferExchange2)
- chan->pBufferExchange2(chan,
- Cur->Buffer2,
- chan->
- Capture2Length,
- Cur->ngeneBuffer.
- SR.Clock, Flags);
+ spin_unlock_irq(&chan->state_lock);
+ if (exch1)
+ exch1(chan, Cur->Buffer1,
+ chan->Capture1Length,
+ Cur->ngeneBuffer.SR.Clock,
+ Flags);
+ if (exch2)
+ exch2(chan, Cur->Buffer2,
+ chan->Capture2Length,
+ Cur->ngeneBuffer.SR.Clock,
+ Flags);
+ spin_lock_irq(&chan->state_lock);
} else if (chan->HWState != HWSTATE_STOP)
chan->HWState = HWSTATE_RUN;
}
@@ -572,11 +570,7 @@
u16 BsSPI = ((stream & 1) ? 0x9800 : 0x9700);
u16 BsSDO = 0x9B00;
- /* down(&dev->stream_mutex); */
- while (down_trylock(&dev->stream_mutex)) {
- printk(KERN_INFO DEVICE_NAME ": SC locked\n");
- msleep(1);
- }
+ down(&dev->stream_mutex);
memset(&com, 0, sizeof(com));
com.cmd.hdr.Opcode = CMD_CONTROL;
com.cmd.hdr.Length = sizeof(struct FW_STREAM_CONTROL) - 2;
@@ -1252,14 +1246,17 @@
version = 15;
size = 23466;
fw_name = "ngene_15.fw";
+ dev->cmd_timeout_workaround = true;
break;
case 16:
size = 23498;
fw_name = "ngene_16.fw";
+ dev->cmd_timeout_workaround = true;
break;
case 17:
size = 24446;
fw_name = "ngene_17.fw";
+ dev->cmd_timeout_workaround = true;
break;
}
@@ -1299,11 +1296,16 @@
ngwritel(0, NGENE_EVENT);
ngwritel(0, NGENE_EVENT_HI);
free_irq(dev->pci_dev->irq, dev);
+#ifdef CONFIG_PCI_MSI
+ if (dev->msi_enabled)
+ pci_disable_msi(dev->pci_dev);
+#endif
}
static int ngene_start(struct ngene *dev)
{
int stat;
+ unsigned long flags;
int i;
pci_set_master(dev->pci_dev);
@@ -1333,6 +1335,28 @@
if (stat < 0)
goto fail;
+#ifdef CONFIG_PCI_MSI
+ /* enable MSI if kernel and card support it */
+ if (pci_msi_enabled() && dev->card_info->msi_supported) {
+ ngwritel(0, NGENE_INT_ENABLE);
+ free_irq(dev->pci_dev->irq, dev);
+ stat = pci_enable_msi(dev->pci_dev);
+ if (stat) {
+ printk(KERN_INFO DEVICE_NAME
+ ": MSI not available\n");
+ flags = IRQF_SHARED;
+ } else {
+ flags = 0;
+ dev->msi_enabled = true;
+ }
+ stat = request_irq(dev->pci_dev->irq, irq_handler,
+ flags, "nGene", dev);
+ if (stat < 0)
+ goto fail2;
+ ngwritel(1, NGENE_INT_ENABLE);
+ }
+#endif
+
stat = ngene_i2c_init(dev, 0);
if (stat < 0)
goto fail;
@@ -1358,10 +1382,18 @@
bconf = BUFFER_CONFIG_3333;
stat = ngene_command_config_buf(dev, bconf);
}
- return stat;
+ if (!stat)
+ return stat;
+
+ /* otherwise error: fall through */
fail:
ngwritel(0, NGENE_INT_ENABLE);
free_irq(dev->pci_dev->irq, dev);
+#ifdef CONFIG_PCI_MSI
+fail2:
+ if (dev->msi_enabled)
+ pci_disable_msi(dev->pci_dev);
+#endif
return stat;
}
@@ -1379,10 +1411,8 @@
struct ngene_info *ni = dev->card_info;
int io = ni->io_type[chan->number];
-#ifdef COMMAND_TIMEOUT_WORKAROUND
- if (chan->running)
+ if (chan->dev->cmd_timeout_workaround && chan->running)
set_transfer(chan, 0);
-#endif
tasklet_kill(&chan->demux_tasklet);
diff --git a/drivers/media/dvb/ngene/ngene-dvb.c b/drivers/media/dvb/ngene/ngene-dvb.c
index 96013eb..48f980b 100644
--- a/drivers/media/dvb/ngene/ngene-dvb.c
+++ b/drivers/media/dvb/ngene/ngene-dvb.c
@@ -37,15 +37,12 @@
#include <linux/pci.h>
#include <linux/smp_lock.h>
#include <linux/timer.h>
-#include <linux/version.h>
#include <linux/byteorder/generic.h>
#include <linux/firmware.h>
#include <linux/vmalloc.h>
#include "ngene.h"
-#define COMMAND_TIMEOUT_WORKAROUND
-
/****************************************************************************/
/* COMMAND API interface ****************************************************/
@@ -69,9 +66,7 @@
struct ngene_channel *chan = priv;
-#ifdef COMMAND_TIMEOUT_WORKAROUND
if (chan->users > 0)
-#endif
dvb_dmx_swfilter(&chan->demux, buf, len);
return NULL;
}
@@ -106,11 +101,8 @@
struct ngene_channel *chan = dvbdmx->priv;
if (chan->users == 0) {
-#ifdef COMMAND_TIMEOUT_WORKAROUND
- if (!chan->running)
-#endif
+ if (!chan->dev->cmd_timeout_workaround || !chan->running)
set_transfer(chan, 1);
- /* msleep(10); */
}
return ++chan->users;
@@ -124,9 +116,8 @@
if (--chan->users)
return chan->users;
-#ifndef COMMAND_TIMEOUT_WORKAROUND
- set_transfer(chan, 0);
-#endif
+ if (!chan->dev->cmd_timeout_workaround)
+ set_transfer(chan, 0);
return 0;
}
diff --git a/drivers/media/dvb/ngene/ngene-i2c.c b/drivers/media/dvb/ngene/ngene-i2c.c
index 2ef54ca..477fe0a 100644
--- a/drivers/media/dvb/ngene/ngene-i2c.c
+++ b/drivers/media/dvb/ngene/ngene-i2c.c
@@ -39,7 +39,6 @@
#include <linux/pci_ids.h>
#include <linux/smp_lock.h>
#include <linux/timer.h>
-#include <linux/version.h>
#include <linux/byteorder/generic.h>
#include <linux/firmware.h>
#include <linux/vmalloc.h>
diff --git a/drivers/media/dvb/ngene/ngene.h b/drivers/media/dvb/ngene/ngene.h
index 676fcbb..8fb4200 100644
--- a/drivers/media/dvb/ngene/ngene.h
+++ b/drivers/media/dvb/ngene/ngene.h
@@ -725,6 +725,8 @@
u32 device_version;
u32 fw_interface_version;
u32 icounts;
+ bool msi_enabled;
+ bool cmd_timeout_workaround;
u8 *CmdDoneByte;
int BootFirmware;
@@ -797,6 +799,7 @@
#define NGENE_VBOX_V2 7
int fw_version;
+ bool msi_supported;
char *name;
int io_type[MAX_STREAM];
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index d8d4214..32a7ec6 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -68,13 +68,14 @@
select DVB_VES1820 if !DVB_FE_CUSTOMISE
select DVB_L64781 if !DVB_FE_CUSTOMISE
select DVB_TDA8083 if !DVB_FE_CUSTOMISE
- select DVB_TDA10021 if !DVB_FE_CUSTOMISE
- select DVB_TDA10023 if !DVB_FE_CUSTOMISE
select DVB_S5H1420 if !DVB_FE_CUSTOMISE
select DVB_TDA10086 if !DVB_FE_CUSTOMISE
select DVB_TDA826X if !DVB_FE_CUSTOMISE
select DVB_LNBP21 if !DVB_FE_CUSTOMISE
select DVB_TDA1004X if !DVB_FE_CUSTOMISE
+ select DVB_ISL6423 if !DVB_FE_CUSTOMISE
+ select DVB_STV090x if !DVB_FE_CUSTOMISE
+ select DVB_STV6110x if !DVB_FE_CUSTOMISE
help
Support for simple SAA7146 based DVB cards (so called Budget-
or Nova-PCI cards) without onboard MPEG2 decoder, and without
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 4617143..13ac9e3 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -215,6 +215,7 @@
break;
case 0x1010:
case 0x1017:
+ case 0x1019:
case 0x101a:
/* for the Technotrend 1500 bundled remote */
ir_codes = RC_MAP_TT_1500;
diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c
index a5844d0..67a4ec8 100644
--- a/drivers/media/radio/si470x/radio-si470x-i2c.c
+++ b/drivers/media/radio/si470x/radio-si470x-i2c.c
@@ -482,7 +482,6 @@
cancel_work_sync(&radio->radio_work);
video_unregister_device(radio->videodev);
kfree(radio);
- i2c_set_clientdata(client, NULL);
return 0;
}
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index ad9e6f9..bdbc9d3 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -646,7 +646,7 @@
config VIDEO_BWQCAM
tristate "Quickcam BW Video For Linux"
- depends on PARPORT && VIDEO_V4L1
+ depends on PARPORT && VIDEO_V4L2
help
Say Y have if you the black and white version of the QuickCam
camera. See the next option for the color version.
@@ -656,7 +656,7 @@
config VIDEO_CQCAM
tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
- depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
+ depends on EXPERIMENTAL && PARPORT && VIDEO_V4L2
help
This is the video4linux driver for the colour version of the
Connectix QuickCam. If you have one of these cameras, say Y here,
diff --git a/drivers/media/video/ak881x.c b/drivers/media/video/ak881x.c
index 35390d4..1573392 100644
--- a/drivers/media/video/ak881x.c
+++ b/drivers/media/video/ak881x.c
@@ -11,6 +11,7 @@
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/videodev2.h>
#include <media/ak881x.h>
@@ -141,7 +142,7 @@
return ak881x_try_g_mbus_fmt(sd, mf);
}
-static int ak881x_enum_mbus_fmt(struct v4l2_subdev *sd, int index,
+static int ak881x_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index,
enum v4l2_mbus_pixelcode *code)
{
if (index)
diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c
index 3c9e754..935e0c9 100644
--- a/drivers/media/video/bw-qcam.c
+++ b/drivers/media/video/bw-qcam.c
@@ -66,19 +66,58 @@
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/fs.h>
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/parport.h>
#include <linux/sched.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
+#include <linux/version.h>
+#include <linux/videodev2.h>
#include <linux/mutex.h>
#include <asm/uaccess.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
-#include "bw-qcam.h"
+/* One from column A... */
+#define QC_NOTSET 0
+#define QC_UNIDIR 1
+#define QC_BIDIR 2
+#define QC_SERIAL 3
+
+/* ... and one from column B */
+#define QC_ANY 0x00
+#define QC_FORCE_UNIDIR 0x10
+#define QC_FORCE_BIDIR 0x20
+#define QC_FORCE_SERIAL 0x30
+/* in the port_mode member */
+
+#define QC_MODE_MASK 0x07
+#define QC_FORCE_MASK 0x70
+
+#define MAX_HEIGHT 243
+#define MAX_WIDTH 336
+
+/* Bit fields for status flags */
+#define QC_PARAM_CHANGE 0x01 /* Camera status change has occurred */
+
+struct qcam {
+ struct v4l2_device v4l2_dev;
+ struct video_device vdev;
+ struct pardevice *pdev;
+ struct parport *pport;
+ struct mutex lock;
+ int width, height;
+ int bpp;
+ int mode;
+ int contrast, brightness, whitebal;
+ int port_mode;
+ int transfer_scale;
+ int top, left;
+ int status;
+ unsigned int saved_bits;
+ unsigned long in_use;
+};
static unsigned int maxpoll = 250; /* Maximum busy-loop count for qcam I/O */
static unsigned int yieldlines = 4; /* Yield after this many during capture */
@@ -93,22 +132,26 @@
* immediately attempt to initialize qcam */
module_param(force_init, int, 0);
-static inline int read_lpstatus(struct qcam_device *q)
+#define MAX_CAMS 4
+static struct qcam *qcams[MAX_CAMS];
+static unsigned int num_cams;
+
+static inline int read_lpstatus(struct qcam *q)
{
return parport_read_status(q->pport);
}
-static inline int read_lpdata(struct qcam_device *q)
+static inline int read_lpdata(struct qcam *q)
{
return parport_read_data(q->pport);
}
-static inline void write_lpdata(struct qcam_device *q, int d)
+static inline void write_lpdata(struct qcam *q, int d)
{
parport_write_data(q->pport, d);
}
-static inline void write_lpcontrol(struct qcam_device *q, int d)
+static void write_lpcontrol(struct qcam *q, int d)
{
if (d & 0x20) {
/* Set bidirectional mode to reverse (data in) */
@@ -124,126 +167,11 @@
parport_write_control(q->pport, d);
}
-static int qc_waithand(struct qcam_device *q, int val);
-static int qc_command(struct qcam_device *q, int command);
-static int qc_readparam(struct qcam_device *q);
-static int qc_setscanmode(struct qcam_device *q);
-static int qc_readbytes(struct qcam_device *q, char buffer[]);
-
-static struct video_device qcam_template;
-
-static int qc_calibrate(struct qcam_device *q)
-{
- /*
- * Bugfix by Hanno Mueller hmueller@kabel.de, Mai 21 96
- * The white balance is an individiual value for each
- * quickcam.
- */
-
- int value;
- int count = 0;
-
- qc_command(q, 27); /* AutoAdjustOffset */
- qc_command(q, 0); /* Dummy Parameter, ignored by the camera */
-
- /* GetOffset (33) will read 255 until autocalibration */
- /* is finished. After that, a value of 1-254 will be */
- /* returned. */
-
- do {
- qc_command(q, 33);
- value = qc_readparam(q);
- mdelay(1);
- schedule();
- count++;
- } while (value == 0xff && count < 2048);
-
- q->whitebal = value;
- return value;
-}
-
-/* Initialize the QuickCam driver control structure. This is where
- * defaults are set for people who don't have a config file.*/
-
-static struct qcam_device *qcam_init(struct parport *port)
-{
- struct qcam_device *q;
-
- q = kmalloc(sizeof(struct qcam_device), GFP_KERNEL);
- if (q == NULL)
- return NULL;
-
- q->pport = port;
- q->pdev = parport_register_device(port, "bw-qcam", NULL, NULL,
- NULL, 0, NULL);
- if (q->pdev == NULL) {
- printk(KERN_ERR "bw-qcam: couldn't register for %s.\n",
- port->name);
- kfree(q);
- return NULL;
- }
-
- memcpy(&q->vdev, &qcam_template, sizeof(qcam_template));
-
- mutex_init(&q->lock);
-
- q->port_mode = (QC_ANY | QC_NOTSET);
- q->width = 320;
- q->height = 240;
- q->bpp = 4;
- q->transfer_scale = 2;
- q->contrast = 192;
- q->brightness = 180;
- q->whitebal = 105;
- q->top = 1;
- q->left = 14;
- q->mode = -1;
- q->status = QC_PARAM_CHANGE;
- return q;
-}
-
-
-/* qc_command is probably a bit of a misnomer -- it's used to send
- * bytes *to* the camera. Generally, these bytes are either commands
- * or arguments to commands, so the name fits, but it still bugs me a
- * bit. See the documentation for a list of commands. */
-
-static int qc_command(struct qcam_device *q, int command)
-{
- int n1, n2;
- int cmd;
-
- write_lpdata(q, command);
- write_lpcontrol(q, 6);
-
- n1 = qc_waithand(q, 1);
-
- write_lpcontrol(q, 0xe);
- n2 = qc_waithand(q, 0);
-
- cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4);
- return cmd;
-}
-
-static int qc_readparam(struct qcam_device *q)
-{
- int n1, n2;
- int cmd;
-
- write_lpcontrol(q, 6);
- n1 = qc_waithand(q, 1);
-
- write_lpcontrol(q, 0xe);
- n2 = qc_waithand(q, 0);
-
- cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4);
- return cmd;
-}
/* qc_waithand busy-waits for a handshake signal from the QuickCam.
* Almost all communication with the camera requires handshaking. */
-static int qc_waithand(struct qcam_device *q, int val)
+static int qc_waithand(struct qcam *q, int val)
{
int status;
int runs = 0;
@@ -286,7 +214,7 @@
* (bit 3 of status register). It also returns the last value read,
* since this data is useful. */
-static unsigned int qc_waithand2(struct qcam_device *q, int val)
+static unsigned int qc_waithand2(struct qcam *q, int val)
{
unsigned int status;
int runs = 0;
@@ -309,6 +237,43 @@
return status;
}
+/* qc_command is probably a bit of a misnomer -- it's used to send
+ * bytes *to* the camera. Generally, these bytes are either commands
+ * or arguments to commands, so the name fits, but it still bugs me a
+ * bit. See the documentation for a list of commands. */
+
+static int qc_command(struct qcam *q, int command)
+{
+ int n1, n2;
+ int cmd;
+
+ write_lpdata(q, command);
+ write_lpcontrol(q, 6);
+
+ n1 = qc_waithand(q, 1);
+
+ write_lpcontrol(q, 0xe);
+ n2 = qc_waithand(q, 0);
+
+ cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4);
+ return cmd;
+}
+
+static int qc_readparam(struct qcam *q)
+{
+ int n1, n2;
+ int cmd;
+
+ write_lpcontrol(q, 6);
+ n1 = qc_waithand(q, 1);
+
+ write_lpcontrol(q, 0xe);
+ n2 = qc_waithand(q, 0);
+
+ cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4);
+ return cmd;
+}
+
/* Try to detect a QuickCam. It appears to flash the upper 4 bits of
the status register at 5-10 Hz. This is only used in the autoprobe
@@ -317,7 +282,7 @@
almost completely safe, while their method screws up my printer if
I plug it in before the camera. */
-static int qc_detect(struct qcam_device *q)
+static int qc_detect(struct qcam *q)
{
int reg, lastreg;
int count = 0;
@@ -358,41 +323,6 @@
}
}
-
-/* Reset the QuickCam. This uses the same sequence the Windows
- * QuickPic program uses. Someone with a bi-directional port should
- * check that bi-directional mode is detected right, and then
- * implement bi-directional mode in qc_readbyte(). */
-
-static void qc_reset(struct qcam_device *q)
-{
- switch (q->port_mode & QC_FORCE_MASK) {
- case QC_FORCE_UNIDIR:
- q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
- break;
-
- case QC_FORCE_BIDIR:
- q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
- break;
-
- case QC_ANY:
- write_lpcontrol(q, 0x20);
- write_lpdata(q, 0x75);
-
- if (read_lpdata(q) != 0x75)
- q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
- else
- q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
- break;
- }
-
- write_lpcontrol(q, 0xb);
- udelay(250);
- write_lpcontrol(q, 0xe);
- qc_setscanmode(q); /* in case port_mode changed */
-}
-
-
/* Decide which scan mode to use. There's no real requirement that
* the scanmode match the resolution in q->height and q-> width -- the
* camera takes the picture at the resolution specified in the
@@ -402,7 +332,7 @@
* returned. If the scan is smaller, then the rest of the image
* returned contains garbage. */
-static int qc_setscanmode(struct qcam_device *q)
+static int qc_setscanmode(struct qcam *q)
{
int old_mode = q->mode;
@@ -442,10 +372,45 @@
}
+/* Reset the QuickCam. This uses the same sequence the Windows
+ * QuickPic program uses. Someone with a bi-directional port should
+ * check that bi-directional mode is detected right, and then
+ * implement bi-directional mode in qc_readbyte(). */
+
+static void qc_reset(struct qcam *q)
+{
+ switch (q->port_mode & QC_FORCE_MASK) {
+ case QC_FORCE_UNIDIR:
+ q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
+ break;
+
+ case QC_FORCE_BIDIR:
+ q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
+ break;
+
+ case QC_ANY:
+ write_lpcontrol(q, 0x20);
+ write_lpdata(q, 0x75);
+
+ if (read_lpdata(q) != 0x75)
+ q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
+ else
+ q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
+ break;
+ }
+
+ write_lpcontrol(q, 0xb);
+ udelay(250);
+ write_lpcontrol(q, 0xe);
+ qc_setscanmode(q); /* in case port_mode changed */
+}
+
+
+
/* Reset the QuickCam and program for brightness, contrast,
* white-balance, and resolution. */
-static void qc_set(struct qcam_device *q)
+static void qc_set(struct qcam *q)
{
int val;
int val2;
@@ -499,7 +464,7 @@
the supplied buffer. It returns the number of bytes read,
or -1 on error. */
-static inline int qc_readbytes(struct qcam_device *q, char buffer[])
+static inline int qc_readbytes(struct qcam *q, char buffer[])
{
int ret = 1;
unsigned int hi, lo;
@@ -590,7 +555,7 @@
* n=2^(bit depth)-1. Ask me for more details if you don't understand
* this. */
-static long qc_capture(struct qcam_device *q, char __user *buf, unsigned long len)
+static long qc_capture(struct qcam *q, char __user *buf, unsigned long len)
{
int i, j, k, yield;
int bytes;
@@ -674,171 +639,206 @@
* Video4linux interfacing
*/
-static long qcam_do_ioctl(struct file *file, unsigned int cmd, void *arg)
+static int qcam_querycap(struct file *file, void *priv,
+ struct v4l2_capability *vcap)
{
- struct video_device *dev = video_devdata(file);
- struct qcam_device *qcam = (struct qcam_device *)dev;
+ struct qcam *qcam = video_drvdata(file);
- switch (cmd) {
- case VIDIOCGCAP:
- {
- struct video_capability *b = arg;
- strcpy(b->name, "Quickcam");
- b->type = VID_TYPE_CAPTURE|VID_TYPE_SCALES|VID_TYPE_MONOCHROME;
- b->channels = 1;
- b->audios = 0;
- b->maxwidth = 320;
- b->maxheight = 240;
- b->minwidth = 80;
- b->minheight = 60;
- return 0;
- }
- case VIDIOCGCHAN:
- {
- struct video_channel *v = arg;
- if (v->channel != 0)
- return -EINVAL;
- v->flags = 0;
- v->tuners = 0;
- /* Good question.. its composite or SVHS so.. */
- v->type = VIDEO_TYPE_CAMERA;
- strcpy(v->name, "Camera");
- return 0;
- }
- case VIDIOCSCHAN:
- {
- struct video_channel *v = arg;
- if (v->channel != 0)
- return -EINVAL;
- return 0;
- }
- case VIDIOCGTUNER:
- {
- struct video_tuner *v = arg;
- if (v->tuner)
- return -EINVAL;
- strcpy(v->name, "Format");
- v->rangelow = 0;
- v->rangehigh = 0;
- v->flags = 0;
- v->mode = VIDEO_MODE_AUTO;
- return 0;
- }
- case VIDIOCSTUNER:
- {
- struct video_tuner *v = arg;
- if (v->tuner)
- return -EINVAL;
- if (v->mode != VIDEO_MODE_AUTO)
- return -EINVAL;
- return 0;
- }
- case VIDIOCGPICT:
- {
- struct video_picture *p = arg;
- p->colour = 0x8000;
- p->hue = 0x8000;
- p->brightness = qcam->brightness << 8;
- p->contrast = qcam->contrast << 8;
- p->whiteness = qcam->whitebal << 8;
- p->depth = qcam->bpp;
- p->palette = VIDEO_PALETTE_GREY;
- return 0;
- }
- case VIDIOCSPICT:
- {
- struct video_picture *p = arg;
- if (p->palette != VIDEO_PALETTE_GREY)
- return -EINVAL;
- if (p->depth != 4 && p->depth != 6)
- return -EINVAL;
-
- /*
- * Now load the camera.
- */
-
- qcam->brightness = p->brightness >> 8;
- qcam->contrast = p->contrast >> 8;
- qcam->whitebal = p->whiteness >> 8;
- qcam->bpp = p->depth;
-
- mutex_lock(&qcam->lock);
- qc_setscanmode(qcam);
- mutex_unlock(&qcam->lock);
- qcam->status |= QC_PARAM_CHANGE;
-
- return 0;
- }
- case VIDIOCSWIN:
- {
- struct video_window *vw = arg;
- if (vw->flags)
- return -EINVAL;
- if (vw->clipcount)
- return -EINVAL;
- if (vw->height < 60 || vw->height > 240)
- return -EINVAL;
- if (vw->width < 80 || vw->width > 320)
- return -EINVAL;
-
- qcam->width = 320;
- qcam->height = 240;
- qcam->transfer_scale = 4;
-
- if (vw->width >= 160 && vw->height >= 120)
- qcam->transfer_scale = 2;
- if (vw->width >= 320 && vw->height >= 240) {
- qcam->width = 320;
- qcam->height = 240;
- qcam->transfer_scale = 1;
- }
- mutex_lock(&qcam->lock);
- qc_setscanmode(qcam);
- mutex_unlock(&qcam->lock);
-
- /* We must update the camera before we grab. We could
- just have changed the grab size */
- qcam->status |= QC_PARAM_CHANGE;
-
- /* Ok we figured out what to use from our wide choice */
- return 0;
- }
- case VIDIOCGWIN:
- {
- struct video_window *vw = arg;
-
- memset(vw, 0, sizeof(*vw));
- vw->width = qcam->width / qcam->transfer_scale;
- vw->height = qcam->height / qcam->transfer_scale;
- return 0;
- }
- case VIDIOCKEY:
- return 0;
- case VIDIOCCAPTURE:
- case VIDIOCGFBUF:
- case VIDIOCSFBUF:
- case VIDIOCGFREQ:
- case VIDIOCSFREQ:
- case VIDIOCGAUDIO:
- case VIDIOCSAUDIO:
- return -EINVAL;
- default:
- return -ENOIOCTLCMD;
- }
+ strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver));
+ strlcpy(vcap->card, "B&W Quickcam", sizeof(vcap->card));
+ strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
+ vcap->version = KERNEL_VERSION(0, 0, 2);
+ vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
return 0;
}
-static long qcam_ioctl(struct file *file,
- unsigned int cmd, unsigned long arg)
+static int qcam_enum_input(struct file *file, void *fh, struct v4l2_input *vin)
{
- return video_usercopy(file, cmd, arg, qcam_do_ioctl);
+ if (vin->index > 0)
+ return -EINVAL;
+ strlcpy(vin->name, "Camera", sizeof(vin->name));
+ vin->type = V4L2_INPUT_TYPE_CAMERA;
+ vin->audioset = 0;
+ vin->tuner = 0;
+ vin->std = 0;
+ vin->status = 0;
+ return 0;
+}
+
+static int qcam_g_input(struct file *file, void *fh, unsigned int *inp)
+{
+ *inp = 0;
+ return 0;
+}
+
+static int qcam_s_input(struct file *file, void *fh, unsigned int inp)
+{
+ return (inp > 0) ? -EINVAL : 0;
+}
+
+static int qcam_queryctrl(struct file *file, void *priv,
+ struct v4l2_queryctrl *qc)
+{
+ switch (qc->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return v4l2_ctrl_query_fill(qc, 0, 255, 1, 180);
+ case V4L2_CID_CONTRAST:
+ return v4l2_ctrl_query_fill(qc, 0, 255, 1, 192);
+ case V4L2_CID_GAMMA:
+ return v4l2_ctrl_query_fill(qc, 0, 255, 1, 105);
+ }
+ return -EINVAL;
+}
+
+static int qcam_g_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct qcam *qcam = video_drvdata(file);
+ int ret = 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ ctrl->value = qcam->brightness;
+ break;
+ case V4L2_CID_CONTRAST:
+ ctrl->value = qcam->contrast;
+ break;
+ case V4L2_CID_GAMMA:
+ ctrl->value = qcam->whitebal;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int qcam_s_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct qcam *qcam = video_drvdata(file);
+ int ret = 0;
+
+ mutex_lock(&qcam->lock);
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ qcam->brightness = ctrl->value;
+ break;
+ case V4L2_CID_CONTRAST:
+ qcam->contrast = ctrl->value;
+ break;
+ case V4L2_CID_GAMMA:
+ qcam->whitebal = ctrl->value;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ if (ret == 0) {
+ qc_setscanmode(qcam);
+ qcam->status |= QC_PARAM_CHANGE;
+ }
+ mutex_unlock(&qcam->lock);
+ return ret;
+}
+
+static int qcam_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+ struct qcam *qcam = video_drvdata(file);
+ struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+ pix->width = qcam->width / qcam->transfer_scale;
+ pix->height = qcam->height / qcam->transfer_scale;
+ pix->pixelformat = (qcam->bpp == 4) ? V4L2_PIX_FMT_Y4 : V4L2_PIX_FMT_Y6;
+ pix->field = V4L2_FIELD_NONE;
+ pix->bytesperline = qcam->width;
+ pix->sizeimage = qcam->width * qcam->height;
+ /* Just a guess */
+ pix->colorspace = V4L2_COLORSPACE_SRGB;
+ return 0;
+}
+
+static int qcam_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+ struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+ if (pix->height <= 60 || pix->width <= 80) {
+ pix->height = 60;
+ pix->width = 80;
+ } else if (pix->height <= 120 || pix->width <= 160) {
+ pix->height = 120;
+ pix->width = 160;
+ } else {
+ pix->height = 240;
+ pix->width = 320;
+ }
+ if (pix->pixelformat != V4L2_PIX_FMT_Y4 &&
+ pix->pixelformat != V4L2_PIX_FMT_Y6)
+ pix->pixelformat = V4L2_PIX_FMT_Y4;
+ pix->field = V4L2_FIELD_NONE;
+ pix->bytesperline = pix->width;
+ pix->sizeimage = pix->width * pix->height;
+ /* Just a guess */
+ pix->colorspace = V4L2_COLORSPACE_SRGB;
+ return 0;
+}
+
+static int qcam_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+ struct qcam *qcam = video_drvdata(file);
+ struct v4l2_pix_format *pix = &fmt->fmt.pix;
+ int ret = qcam_try_fmt_vid_cap(file, fh, fmt);
+
+ if (ret)
+ return ret;
+ qcam->width = 320;
+ qcam->height = 240;
+ if (pix->height == 60)
+ qcam->transfer_scale = 4;
+ else if (pix->height == 120)
+ qcam->transfer_scale = 2;
+ else
+ qcam->transfer_scale = 1;
+ if (pix->pixelformat == V4L2_PIX_FMT_Y6)
+ qcam->bpp = 6;
+ else
+ qcam->bpp = 4;
+
+ mutex_lock(&qcam->lock);
+ qc_setscanmode(qcam);
+ /* We must update the camera before we grab. We could
+ just have changed the grab size */
+ qcam->status |= QC_PARAM_CHANGE;
+ mutex_unlock(&qcam->lock);
+ return 0;
+}
+
+static int qcam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt)
+{
+ static struct v4l2_fmtdesc formats[] = {
+ { 0, 0, 0,
+ "4-Bit Monochrome", V4L2_PIX_FMT_Y4,
+ { 0, 0, 0, 0 }
+ },
+ { 0, 0, 0,
+ "6-Bit Monochrome", V4L2_PIX_FMT_Y6,
+ { 0, 0, 0, 0 }
+ },
+ };
+ enum v4l2_buf_type type = fmt->type;
+
+ if (fmt->index > 1)
+ return -EINVAL;
+
+ *fmt = formats[fmt->index];
+ fmt->type = type;
+ return 0;
}
static ssize_t qcam_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
- struct video_device *v = video_devdata(file);
- struct qcam_device *qcam = (struct qcam_device *)v;
+ struct qcam *qcam = video_drvdata(file);
int len;
parport_claim_or_block(qcam->pdev);
@@ -858,43 +858,112 @@
return len;
}
-static int qcam_exclusive_open(struct file *file)
-{
- struct video_device *dev = video_devdata(file);
- struct qcam_device *qcam = (struct qcam_device *)dev;
-
- return test_and_set_bit(0, &qcam->in_use) ? -EBUSY : 0;
-}
-
-static int qcam_exclusive_release(struct file *file)
-{
- struct video_device *dev = video_devdata(file);
- struct qcam_device *qcam = (struct qcam_device *)dev;
-
- clear_bit(0, &qcam->in_use);
- return 0;
-}
-
static const struct v4l2_file_operations qcam_fops = {
.owner = THIS_MODULE,
- .open = qcam_exclusive_open,
- .release = qcam_exclusive_release,
- .ioctl = qcam_ioctl,
+ .ioctl = video_ioctl2,
.read = qcam_read,
};
-static struct video_device qcam_template = {
- .name = "Connectix Quickcam",
- .fops = &qcam_fops,
- .release = video_device_release_empty,
+
+static const struct v4l2_ioctl_ops qcam_ioctl_ops = {
+ .vidioc_querycap = qcam_querycap,
+ .vidioc_g_input = qcam_g_input,
+ .vidioc_s_input = qcam_s_input,
+ .vidioc_enum_input = qcam_enum_input,
+ .vidioc_queryctrl = qcam_queryctrl,
+ .vidioc_g_ctrl = qcam_g_ctrl,
+ .vidioc_s_ctrl = qcam_s_ctrl,
+ .vidioc_enum_fmt_vid_cap = qcam_enum_fmt_vid_cap,
+ .vidioc_g_fmt_vid_cap = qcam_g_fmt_vid_cap,
+ .vidioc_s_fmt_vid_cap = qcam_s_fmt_vid_cap,
+ .vidioc_try_fmt_vid_cap = qcam_try_fmt_vid_cap,
};
-#define MAX_CAMS 4
-static struct qcam_device *qcams[MAX_CAMS];
-static unsigned int num_cams;
+/* Initialize the QuickCam driver control structure. This is where
+ * defaults are set for people who don't have a config file.*/
+
+static struct qcam *qcam_init(struct parport *port)
+{
+ struct qcam *qcam;
+ struct v4l2_device *v4l2_dev;
+
+ qcam = kzalloc(sizeof(struct qcam), GFP_KERNEL);
+ if (qcam == NULL)
+ return NULL;
+
+ v4l2_dev = &qcam->v4l2_dev;
+ strlcpy(v4l2_dev->name, "bw-qcam", sizeof(v4l2_dev->name));
+
+ if (v4l2_device_register(NULL, v4l2_dev) < 0) {
+ v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
+ return NULL;
+ }
+
+ qcam->pport = port;
+ qcam->pdev = parport_register_device(port, "bw-qcam", NULL, NULL,
+ NULL, 0, NULL);
+ if (qcam->pdev == NULL) {
+ v4l2_err(v4l2_dev, "couldn't register for %s.\n", port->name);
+ kfree(qcam);
+ return NULL;
+ }
+
+ strlcpy(qcam->vdev.name, "Connectix QuickCam", sizeof(qcam->vdev.name));
+ qcam->vdev.v4l2_dev = v4l2_dev;
+ qcam->vdev.fops = &qcam_fops;
+ qcam->vdev.ioctl_ops = &qcam_ioctl_ops;
+ qcam->vdev.release = video_device_release_empty;
+ video_set_drvdata(&qcam->vdev, qcam);
+
+ mutex_init(&qcam->lock);
+
+ qcam->port_mode = (QC_ANY | QC_NOTSET);
+ qcam->width = 320;
+ qcam->height = 240;
+ qcam->bpp = 4;
+ qcam->transfer_scale = 2;
+ qcam->contrast = 192;
+ qcam->brightness = 180;
+ qcam->whitebal = 105;
+ qcam->top = 1;
+ qcam->left = 14;
+ qcam->mode = -1;
+ qcam->status = QC_PARAM_CHANGE;
+ return qcam;
+}
+
+static int qc_calibrate(struct qcam *q)
+{
+ /*
+ * Bugfix by Hanno Mueller hmueller@kabel.de, Mai 21 96
+ * The white balance is an individual value for each
+ * quickcam.
+ */
+
+ int value;
+ int count = 0;
+
+ qc_command(q, 27); /* AutoAdjustOffset */
+ qc_command(q, 0); /* Dummy Parameter, ignored by the camera */
+
+ /* GetOffset (33) will read 255 until autocalibration */
+ /* is finished. After that, a value of 1-254 will be */
+ /* returned. */
+
+ do {
+ qc_command(q, 33);
+ value = qc_readparam(q);
+ mdelay(1);
+ schedule();
+ count++;
+ } while (value == 0xff && count < 2048);
+
+ q->whitebal = value;
+ return value;
+}
static int init_bwqcam(struct parport *port)
{
- struct qcam_device *qcam;
+ struct qcam *qcam;
if (num_cams == MAX_CAMS) {
printk(KERN_ERR "Too many Quickcams (max %d)\n", MAX_CAMS);
@@ -919,7 +988,7 @@
parport_release(qcam->pdev);
- printk(KERN_INFO "Connectix Quickcam on %s\n", qcam->pport->name);
+ v4l2_info(&qcam->v4l2_dev, "Connectix Quickcam on %s\n", qcam->pport->name);
if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
parport_unregister_device(qcam->pdev);
@@ -932,7 +1001,7 @@
return 0;
}
-static void close_bwqcam(struct qcam_device *qcam)
+static void close_bwqcam(struct qcam *qcam)
{
video_unregister_device(&qcam->vdev);
parport_unregister_device(qcam->pdev);
@@ -983,7 +1052,7 @@
{
int i;
for (i = 0; i < num_cams; i++) {
- struct qcam_device *qcam = qcams[i];
+ struct qcam *qcam = qcams[i];
if (qcam && qcam->pdev->port == port) {
qcams[i] = NULL;
close_bwqcam(qcam);
diff --git a/drivers/media/video/bw-qcam.h b/drivers/media/video/bw-qcam.h
deleted file mode 100644
index 8a60c5d..0000000
--- a/drivers/media/video/bw-qcam.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Video4Linux bw-qcam driver
- *
- * Derived from code..
- */
-
-/******************************************************************
-
-Copyright (C) 1996 by Scott Laird
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-IN NO EVENT SHALL SCOTT LAIRD BE LIABLE FOR ANY CLAIM, DAMAGES OR
-OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-OTHER DEALINGS IN THE SOFTWARE.
-
-******************************************************************/
-
-/* One from column A... */
-#define QC_NOTSET 0
-#define QC_UNIDIR 1
-#define QC_BIDIR 2
-#define QC_SERIAL 3
-
-/* ... and one from column B */
-#define QC_ANY 0x00
-#define QC_FORCE_UNIDIR 0x10
-#define QC_FORCE_BIDIR 0x20
-#define QC_FORCE_SERIAL 0x30
-/* in the port_mode member */
-
-#define QC_MODE_MASK 0x07
-#define QC_FORCE_MASK 0x70
-
-#define MAX_HEIGHT 243
-#define MAX_WIDTH 336
-
-/* Bit fields for status flags */
-#define QC_PARAM_CHANGE 0x01 /* Camera status change has occurred */
-
-struct qcam_device {
- struct video_device vdev;
- struct pardevice *pdev;
- struct parport *pport;
- struct mutex lock;
- int width, height;
- int bpp;
- int mode;
- int contrast, brightness, whitebal;
- int port_mode;
- int transfer_scale;
- int top, left;
- int status;
- unsigned int saved_bits;
- unsigned long in_use;
-};
diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c
index 8f1dd88..6e4b196 100644
--- a/drivers/media/video/c-qcam.c
+++ b/drivers/media/video/c-qcam.c
@@ -33,15 +33,17 @@
#include <linux/mm.h>
#include <linux/parport.h>
#include <linux/sched.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
#include <linux/mutex.h>
#include <linux/jiffies.h>
-
+#include <linux/version.h>
+#include <linux/videodev2.h>
#include <asm/uaccess.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
-struct qcam_device {
+struct qcam {
+ struct v4l2_device v4l2_dev;
struct video_device vdev;
struct pardevice *pdev;
struct parport *pport;
@@ -51,7 +53,6 @@
int contrast, brightness, whitebal;
int top, left;
unsigned int bidirectional;
- unsigned long in_use;
struct mutex lock;
};
@@ -68,33 +69,45 @@
#define QC_DECIMATION_2 2
#define QC_DECIMATION_4 4
-#define BANNER "Colour QuickCam for Video4Linux v0.05"
+#define BANNER "Colour QuickCam for Video4Linux v0.06"
static int parport[MAX_CAMS] = { [1 ... MAX_CAMS-1] = -1 };
static int probe = 2;
static int force_rgb;
static int video_nr = -1;
-static inline void qcam_set_ack(struct qcam_device *qcam, unsigned int i)
+/* FIXME: parport=auto would never have worked, surely? --RR */
+MODULE_PARM_DESC(parport, "parport=<auto|n[,n]...> for port detection method\n"
+ "probe=<0|1|2> for camera detection method\n"
+ "force_rgb=<0|1> for RGB data format (default BGR)");
+module_param_array(parport, int, NULL, 0);
+module_param(probe, int, 0);
+module_param(force_rgb, bool, 0);
+module_param(video_nr, int, 0);
+
+static struct qcam *qcams[MAX_CAMS];
+static unsigned int num_cams;
+
+static inline void qcam_set_ack(struct qcam *qcam, unsigned int i)
{
/* note: the QC specs refer to the PCAck pin by voltage, not
software level. PC ports have builtin inverters. */
parport_frob_control(qcam->pport, 8, i ? 8 : 0);
}
-static inline unsigned int qcam_ready1(struct qcam_device *qcam)
+static inline unsigned int qcam_ready1(struct qcam *qcam)
{
return (parport_read_status(qcam->pport) & 0x8) ? 1 : 0;
}
-static inline unsigned int qcam_ready2(struct qcam_device *qcam)
+static inline unsigned int qcam_ready2(struct qcam *qcam)
{
return (parport_read_data(qcam->pport) & 0x1) ? 1 : 0;
}
-static unsigned int qcam_await_ready1(struct qcam_device *qcam,
- int value)
+static unsigned int qcam_await_ready1(struct qcam *qcam, int value)
{
+ struct v4l2_device *v4l2_dev = &qcam->v4l2_dev;
unsigned long oldjiffies = jiffies;
unsigned int i;
@@ -112,14 +125,15 @@
}
/* Probably somebody pulled the plug out. Not much we can do. */
- printk(KERN_ERR "c-qcam: ready1 timeout (%d) %x %x\n", value,
+ v4l2_err(v4l2_dev, "ready1 timeout (%d) %x %x\n", value,
parport_read_status(qcam->pport),
parport_read_control(qcam->pport));
return 1;
}
-static unsigned int qcam_await_ready2(struct qcam_device *qcam, int value)
+static unsigned int qcam_await_ready2(struct qcam *qcam, int value)
{
+ struct v4l2_device *v4l2_dev = &qcam->v4l2_dev;
unsigned long oldjiffies = jiffies;
unsigned int i;
@@ -137,14 +151,14 @@
}
/* Probably somebody pulled the plug out. Not much we can do. */
- printk(KERN_ERR "c-qcam: ready2 timeout (%d) %x %x %x\n", value,
+ v4l2_err(v4l2_dev, "ready2 timeout (%d) %x %x %x\n", value,
parport_read_status(qcam->pport),
parport_read_control(qcam->pport),
parport_read_data(qcam->pport));
return 1;
}
-static int qcam_read_data(struct qcam_device *qcam)
+static int qcam_read_data(struct qcam *qcam)
{
unsigned int idata;
@@ -159,21 +173,22 @@
return idata;
}
-static int qcam_write_data(struct qcam_device *qcam, unsigned int data)
+static int qcam_write_data(struct qcam *qcam, unsigned int data)
{
+ struct v4l2_device *v4l2_dev = &qcam->v4l2_dev;
unsigned int idata;
parport_write_data(qcam->pport, data);
idata = qcam_read_data(qcam);
if (data != idata) {
- printk(KERN_WARNING "cqcam: sent %x but received %x\n", data,
+ v4l2_warn(v4l2_dev, "sent %x but received %x\n", data,
idata);
return 1;
}
return 0;
}
-static inline int qcam_set(struct qcam_device *qcam, unsigned int cmd, unsigned int data)
+static inline int qcam_set(struct qcam *qcam, unsigned int cmd, unsigned int data)
{
if (qcam_write_data(qcam, cmd))
return -1;
@@ -182,14 +197,14 @@
return 0;
}
-static inline int qcam_get(struct qcam_device *qcam, unsigned int cmd)
+static inline int qcam_get(struct qcam *qcam, unsigned int cmd)
{
if (qcam_write_data(qcam, cmd))
return -1;
return qcam_read_data(qcam);
}
-static int qc_detect(struct qcam_device *qcam)
+static int qc_detect(struct qcam *qcam)
{
unsigned int stat, ostat, i, count = 0;
@@ -246,7 +261,7 @@
return 0;
}
-static void qc_reset(struct qcam_device *qcam)
+static void qc_reset(struct qcam *qcam)
{
parport_write_control(qcam->pport, 0xc);
parport_write_control(qcam->pport, 0x8);
@@ -258,55 +273,55 @@
/* Reset the QuickCam and program for brightness, contrast,
* white-balance, and resolution. */
-static void qc_setup(struct qcam_device *q)
+static void qc_setup(struct qcam *qcam)
{
- qc_reset(q);
+ qc_reset(qcam);
/* Set the brightness. */
- qcam_set(q, 11, q->brightness);
+ qcam_set(qcam, 11, qcam->brightness);
/* Set the height and width. These refer to the actual
CCD area *before* applying the selected decimation. */
- qcam_set(q, 17, q->ccd_height);
- qcam_set(q, 19, q->ccd_width / 2);
+ qcam_set(qcam, 17, qcam->ccd_height);
+ qcam_set(qcam, 19, qcam->ccd_width / 2);
/* Set top and left. */
- qcam_set(q, 0xd, q->top);
- qcam_set(q, 0xf, q->left);
+ qcam_set(qcam, 0xd, qcam->top);
+ qcam_set(qcam, 0xf, qcam->left);
/* Set contrast and white balance. */
- qcam_set(q, 0x19, q->contrast);
- qcam_set(q, 0x1f, q->whitebal);
+ qcam_set(qcam, 0x19, qcam->contrast);
+ qcam_set(qcam, 0x1f, qcam->whitebal);
/* Set the speed. */
- qcam_set(q, 45, 2);
+ qcam_set(qcam, 45, 2);
}
/* Read some bytes from the camera and put them in the buffer.
nbytes should be a multiple of 3, because bidirectional mode gives
us three bytes at a time. */
-static unsigned int qcam_read_bytes(struct qcam_device *q, unsigned char *buf, unsigned int nbytes)
+static unsigned int qcam_read_bytes(struct qcam *qcam, unsigned char *buf, unsigned int nbytes)
{
unsigned int bytes = 0;
- qcam_set_ack(q, 0);
- if (q->bidirectional) {
+ qcam_set_ack(qcam, 0);
+ if (qcam->bidirectional) {
/* It's a bidirectional port */
while (bytes < nbytes) {
unsigned int lo1, hi1, lo2, hi2;
unsigned char r, g, b;
- if (qcam_await_ready2(q, 1))
+ if (qcam_await_ready2(qcam, 1))
return bytes;
- lo1 = parport_read_data(q->pport) >> 1;
- hi1 = ((parport_read_status(q->pport) >> 3) & 0x1f) ^ 0x10;
- qcam_set_ack(q, 1);
- if (qcam_await_ready2(q, 0))
+ lo1 = parport_read_data(qcam->pport) >> 1;
+ hi1 = ((parport_read_status(qcam->pport) >> 3) & 0x1f) ^ 0x10;
+ qcam_set_ack(qcam, 1);
+ if (qcam_await_ready2(qcam, 0))
return bytes;
- lo2 = parport_read_data(q->pport) >> 1;
- hi2 = ((parport_read_status(q->pport) >> 3) & 0x1f) ^ 0x10;
- qcam_set_ack(q, 0);
+ lo2 = parport_read_data(qcam->pport) >> 1;
+ hi2 = ((parport_read_status(qcam->pport) >> 3) & 0x1f) ^ 0x10;
+ qcam_set_ack(qcam, 0);
r = lo1 | ((hi1 & 1) << 7);
g = ((hi1 & 0x1e) << 3) | ((hi2 & 0x1e) >> 1);
b = lo2 | ((hi2 & 1) << 7);
@@ -328,14 +343,14 @@
while (bytes < nbytes) {
unsigned int hi, lo;
- if (qcam_await_ready1(q, 1))
+ if (qcam_await_ready1(qcam, 1))
return bytes;
- hi = (parport_read_status(q->pport) & 0xf0);
- qcam_set_ack(q, 1);
- if (qcam_await_ready1(q, 0))
+ hi = (parport_read_status(qcam->pport) & 0xf0);
+ qcam_set_ack(qcam, 1);
+ if (qcam_await_ready1(qcam, 0))
return bytes;
- lo = (parport_read_status(q->pport) & 0xf0);
- qcam_set_ack(q, 0);
+ lo = (parport_read_status(qcam->pport) & 0xf0);
+ qcam_set_ack(qcam, 0);
/* flip some bits */
rgb[(i = bytes++ % 3)] = (hi | (lo >> 4)) ^ 0x88;
if (i >= 2) {
@@ -361,10 +376,11 @@
#define BUFSZ 150
-static long qc_capture(struct qcam_device *q, char __user *buf, unsigned long len)
+static long qc_capture(struct qcam *qcam, char __user *buf, unsigned long len)
{
+ struct v4l2_device *v4l2_dev = &qcam->v4l2_dev;
unsigned lines, pixelsperline, bitsperxfer;
- unsigned int is_bi_dir = q->bidirectional;
+ unsigned int is_bi_dir = qcam->bidirectional;
size_t wantlen, outptr = 0;
char tmpbuf[BUFSZ];
@@ -373,10 +389,10 @@
/* Wait for camera to become ready */
for (;;) {
- int i = qcam_get(q, 41);
+ int i = qcam_get(qcam, 41);
if (i == -1) {
- qc_setup(q);
+ qc_setup(qcam);
return -EIO;
}
if ((i & 0x80) == 0)
@@ -384,25 +400,25 @@
schedule();
}
- if (qcam_set(q, 7, (q->mode | (is_bi_dir ? 1 : 0)) + 1))
+ if (qcam_set(qcam, 7, (qcam->mode | (is_bi_dir ? 1 : 0)) + 1))
return -EIO;
- lines = q->height;
- pixelsperline = q->width;
+ lines = qcam->height;
+ pixelsperline = qcam->width;
bitsperxfer = (is_bi_dir) ? 24 : 8;
if (is_bi_dir) {
/* Turn the port around */
- parport_data_reverse(q->pport);
+ parport_data_reverse(qcam->pport);
mdelay(3);
- qcam_set_ack(q, 0);
- if (qcam_await_ready1(q, 1)) {
- qc_setup(q);
+ qcam_set_ack(qcam, 0);
+ if (qcam_await_ready1(qcam, 1)) {
+ qc_setup(qcam);
return -EIO;
}
- qcam_set_ack(q, 1);
- if (qcam_await_ready1(q, 0)) {
- qc_setup(q);
+ qcam_set_ack(qcam, 1);
+ if (qcam_await_ready1(qcam, 0)) {
+ qc_setup(qcam);
return -EIO;
}
}
@@ -413,7 +429,7 @@
size_t t, s;
s = (wantlen > BUFSZ) ? BUFSZ : wantlen;
- t = qcam_read_bytes(q, tmpbuf, s);
+ t = qcam_read_bytes(qcam, tmpbuf, s);
if (outptr < len) {
size_t sz = len - outptr;
@@ -432,10 +448,10 @@
len = outptr;
if (wantlen) {
- printk(KERN_ERR "qcam: short read.\n");
+ v4l2_err(v4l2_dev, "short read.\n");
if (is_bi_dir)
- parport_data_forward(q->pport);
- qc_setup(q);
+ parport_data_forward(qcam->pport);
+ qc_setup(qcam);
return len;
}
@@ -443,49 +459,49 @@
int l;
do {
- l = qcam_read_bytes(q, tmpbuf, 3);
+ l = qcam_read_bytes(qcam, tmpbuf, 3);
cond_resched();
} while (l && (tmpbuf[0] == 0x7e || tmpbuf[1] == 0x7e || tmpbuf[2] == 0x7e));
if (force_rgb) {
if (tmpbuf[0] != 0xe || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xf)
- printk(KERN_ERR "qcam: bad EOF\n");
+ v4l2_err(v4l2_dev, "bad EOF\n");
} else {
if (tmpbuf[0] != 0xf || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xe)
- printk(KERN_ERR "qcam: bad EOF\n");
+ v4l2_err(v4l2_dev, "bad EOF\n");
}
- qcam_set_ack(q, 0);
- if (qcam_await_ready1(q, 1)) {
- printk(KERN_ERR "qcam: no ack after EOF\n");
- parport_data_forward(q->pport);
- qc_setup(q);
+ qcam_set_ack(qcam, 0);
+ if (qcam_await_ready1(qcam, 1)) {
+ v4l2_err(v4l2_dev, "no ack after EOF\n");
+ parport_data_forward(qcam->pport);
+ qc_setup(qcam);
return len;
}
- parport_data_forward(q->pport);
+ parport_data_forward(qcam->pport);
mdelay(3);
- qcam_set_ack(q, 1);
- if (qcam_await_ready1(q, 0)) {
- printk(KERN_ERR "qcam: no ack to port turnaround\n");
- qc_setup(q);
+ qcam_set_ack(qcam, 1);
+ if (qcam_await_ready1(qcam, 0)) {
+ v4l2_err(v4l2_dev, "no ack to port turnaround\n");
+ qc_setup(qcam);
return len;
}
} else {
int l;
do {
- l = qcam_read_bytes(q, tmpbuf, 1);
+ l = qcam_read_bytes(qcam, tmpbuf, 1);
cond_resched();
} while (l && tmpbuf[0] == 0x7e);
- l = qcam_read_bytes(q, tmpbuf + 1, 2);
+ l = qcam_read_bytes(qcam, tmpbuf + 1, 2);
if (force_rgb) {
if (tmpbuf[0] != 0xe || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xf)
- printk(KERN_ERR "qcam: bad EOF\n");
+ v4l2_err(v4l2_dev, "bad EOF\n");
} else {
if (tmpbuf[0] != 0xf || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xe)
- printk(KERN_ERR "qcam: bad EOF\n");
+ v4l2_err(v4l2_dev, "bad EOF\n");
}
}
- qcam_write_data(q, 0);
+ qcam_write_data(qcam, 0);
return len;
}
@@ -493,184 +509,202 @@
* Video4linux interfacing
*/
-static long qcam_do_ioctl(struct file *file, unsigned int cmd, void *arg)
+static int qcam_querycap(struct file *file, void *priv,
+ struct v4l2_capability *vcap)
{
- struct video_device *dev = video_devdata(file);
- struct qcam_device *qcam = (struct qcam_device *)dev;
+ struct qcam *qcam = video_drvdata(file);
- switch (cmd) {
- case VIDIOCGCAP:
- {
- struct video_capability *b = arg;
-
- strcpy(b->name, "Quickcam");
- b->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
- b->channels = 1;
- b->audios = 0;
- b->maxwidth = 320;
- b->maxheight = 240;
- b->minwidth = 80;
- b->minheight = 60;
- return 0;
- }
- case VIDIOCGCHAN:
- {
- struct video_channel *v = arg;
-
- if (v->channel != 0)
- return -EINVAL;
- v->flags = 0;
- v->tuners = 0;
- /* Good question.. its composite or SVHS so.. */
- v->type = VIDEO_TYPE_CAMERA;
- strcpy(v->name, "Camera");
- return 0;
- }
- case VIDIOCSCHAN:
- {
- struct video_channel *v = arg;
-
- if (v->channel != 0)
- return -EINVAL;
- return 0;
- }
- case VIDIOCGTUNER:
- {
- struct video_tuner *v = arg;
-
- if (v->tuner)
- return -EINVAL;
- memset(v, 0, sizeof(*v));
- strcpy(v->name, "Format");
- v->mode = VIDEO_MODE_AUTO;
- return 0;
- }
- case VIDIOCSTUNER:
- {
- struct video_tuner *v = arg;
-
- if (v->tuner)
- return -EINVAL;
- if (v->mode != VIDEO_MODE_AUTO)
- return -EINVAL;
- return 0;
- }
- case VIDIOCGPICT:
- {
- struct video_picture *p = arg;
-
- p->colour = 0x8000;
- p->hue = 0x8000;
- p->brightness = qcam->brightness << 8;
- p->contrast = qcam->contrast << 8;
- p->whiteness = qcam->whitebal << 8;
- p->depth = 24;
- p->palette = VIDEO_PALETTE_RGB24;
- return 0;
- }
- case VIDIOCSPICT:
- {
- struct video_picture *p = arg;
-
- /*
- * Sanity check args
- */
- if (p->depth != 24 || p->palette != VIDEO_PALETTE_RGB24)
- return -EINVAL;
-
- /*
- * Now load the camera.
- */
- qcam->brightness = p->brightness >> 8;
- qcam->contrast = p->contrast >> 8;
- qcam->whitebal = p->whiteness >> 8;
-
- mutex_lock(&qcam->lock);
- parport_claim_or_block(qcam->pdev);
- qc_setup(qcam);
- parport_release(qcam->pdev);
- mutex_unlock(&qcam->lock);
- return 0;
- }
- case VIDIOCSWIN:
- {
- struct video_window *vw = arg;
-
- if (vw->flags)
- return -EINVAL;
- if (vw->clipcount)
- return -EINVAL;
- if (vw->height < 60 || vw->height > 240)
- return -EINVAL;
- if (vw->width < 80 || vw->width > 320)
- return -EINVAL;
-
- qcam->width = 80;
- qcam->height = 60;
- qcam->mode = QC_DECIMATION_4;
-
- if (vw->width >= 160 && vw->height >= 120) {
- qcam->width = 160;
- qcam->height = 120;
- qcam->mode = QC_DECIMATION_2;
- }
- if (vw->width >= 320 && vw->height >= 240) {
- qcam->width = 320;
- qcam->height = 240;
- qcam->mode = QC_DECIMATION_1;
- }
- qcam->mode |= QC_MILLIONS;
-#if 0
- if (vw->width >= 640 && vw->height >= 480) {
- qcam->width = 640;
- qcam->height = 480;
- qcam->mode = QC_BILLIONS | QC_DECIMATION_1;
- }
-#endif
- /* Ok we figured out what to use from our
- wide choice */
- mutex_lock(&qcam->lock);
- parport_claim_or_block(qcam->pdev);
- qc_setup(qcam);
- parport_release(qcam->pdev);
- mutex_unlock(&qcam->lock);
- return 0;
- }
- case VIDIOCGWIN:
- {
- struct video_window *vw = arg;
- memset(vw, 0, sizeof(*vw));
- vw->width = qcam->width;
- vw->height = qcam->height;
- return 0;
- }
- case VIDIOCKEY:
- return 0;
- case VIDIOCCAPTURE:
- case VIDIOCGFBUF:
- case VIDIOCSFBUF:
- case VIDIOCGFREQ:
- case VIDIOCSFREQ:
- case VIDIOCGAUDIO:
- case VIDIOCSAUDIO:
- return -EINVAL;
- default:
- return -ENOIOCTLCMD;
- }
+ strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver));
+ strlcpy(vcap->card, "Color Quickcam", sizeof(vcap->card));
+ strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
+ vcap->version = KERNEL_VERSION(0, 0, 3);
+ vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
return 0;
}
-static long qcam_ioctl(struct file *file,
- unsigned int cmd, unsigned long arg)
+static int qcam_enum_input(struct file *file, void *fh, struct v4l2_input *vin)
{
- return video_usercopy(file, cmd, arg, qcam_do_ioctl);
+ if (vin->index > 0)
+ return -EINVAL;
+ strlcpy(vin->name, "Camera", sizeof(vin->name));
+ vin->type = V4L2_INPUT_TYPE_CAMERA;
+ vin->audioset = 0;
+ vin->tuner = 0;
+ vin->std = 0;
+ vin->status = 0;
+ return 0;
+}
+
+static int qcam_g_input(struct file *file, void *fh, unsigned int *inp)
+{
+ *inp = 0;
+ return 0;
+}
+
+static int qcam_s_input(struct file *file, void *fh, unsigned int inp)
+{
+ return (inp > 0) ? -EINVAL : 0;
+}
+
+static int qcam_queryctrl(struct file *file, void *priv,
+ struct v4l2_queryctrl *qc)
+{
+ switch (qc->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return v4l2_ctrl_query_fill(qc, 0, 255, 1, 240);
+ case V4L2_CID_CONTRAST:
+ return v4l2_ctrl_query_fill(qc, 0, 255, 1, 192);
+ case V4L2_CID_GAMMA:
+ return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
+ }
+ return -EINVAL;
+}
+
+static int qcam_g_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct qcam *qcam = video_drvdata(file);
+ int ret = 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ ctrl->value = qcam->brightness;
+ break;
+ case V4L2_CID_CONTRAST:
+ ctrl->value = qcam->contrast;
+ break;
+ case V4L2_CID_GAMMA:
+ ctrl->value = qcam->whitebal;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int qcam_s_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct qcam *qcam = video_drvdata(file);
+ int ret = 0;
+
+ mutex_lock(&qcam->lock);
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ qcam->brightness = ctrl->value;
+ break;
+ case V4L2_CID_CONTRAST:
+ qcam->contrast = ctrl->value;
+ break;
+ case V4L2_CID_GAMMA:
+ qcam->whitebal = ctrl->value;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ if (ret == 0) {
+ parport_claim_or_block(qcam->pdev);
+ qc_setup(qcam);
+ parport_release(qcam->pdev);
+ }
+ mutex_unlock(&qcam->lock);
+ return ret;
+}
+
+static int qcam_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+ struct qcam *qcam = video_drvdata(file);
+ struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+ pix->width = qcam->width;
+ pix->height = qcam->height;
+ pix->pixelformat = V4L2_PIX_FMT_RGB24;
+ pix->field = V4L2_FIELD_NONE;
+ pix->bytesperline = 3 * qcam->width;
+ pix->sizeimage = 3 * qcam->width * qcam->height;
+ /* Just a guess */
+ pix->colorspace = V4L2_COLORSPACE_SRGB;
+ return 0;
+}
+
+static int qcam_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+ struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+ if (pix->height < 60 || pix->width < 80) {
+ pix->height = 60;
+ pix->width = 80;
+ } else if (pix->height < 120 || pix->width < 160) {
+ pix->height = 120;
+ pix->width = 160;
+ } else {
+ pix->height = 240;
+ pix->width = 320;
+ }
+ pix->pixelformat = V4L2_PIX_FMT_RGB24;
+ pix->field = V4L2_FIELD_NONE;
+ pix->bytesperline = 3 * pix->width;
+ pix->sizeimage = 3 * pix->width * pix->height;
+ /* Just a guess */
+ pix->colorspace = V4L2_COLORSPACE_SRGB;
+ return 0;
+}
+
+static int qcam_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+ struct qcam *qcam = video_drvdata(file);
+ struct v4l2_pix_format *pix = &fmt->fmt.pix;
+ int ret = qcam_try_fmt_vid_cap(file, fh, fmt);
+
+ if (ret)
+ return ret;
+ switch (pix->height) {
+ case 60:
+ qcam->mode = QC_DECIMATION_4;
+ break;
+ case 120:
+ qcam->mode = QC_DECIMATION_2;
+ break;
+ default:
+ qcam->mode = QC_DECIMATION_1;
+ break;
+ }
+
+ mutex_lock(&qcam->lock);
+ qcam->mode |= QC_MILLIONS;
+ qcam->height = pix->height;
+ qcam->width = pix->width;
+ parport_claim_or_block(qcam->pdev);
+ qc_setup(qcam);
+ parport_release(qcam->pdev);
+ mutex_unlock(&qcam->lock);
+ return 0;
+}
+
+static int qcam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt)
+{
+ static struct v4l2_fmtdesc formats[] = {
+ { 0, 0, 0,
+ "RGB 8:8:8", V4L2_PIX_FMT_RGB24,
+ { 0, 0, 0, 0 }
+ },
+ };
+ enum v4l2_buf_type type = fmt->type;
+
+ if (fmt->index > 0)
+ return -EINVAL;
+
+ *fmt = formats[fmt->index];
+ fmt->type = type;
+ return 0;
}
static ssize_t qcam_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
- struct video_device *v = video_devdata(file);
- struct qcam_device *qcam = (struct qcam_device *)v;
+ struct qcam *qcam = video_drvdata(file);
int len;
mutex_lock(&qcam->lock);
@@ -682,81 +716,80 @@
return len;
}
-static int qcam_exclusive_open(struct file *file)
-{
- struct video_device *dev = video_devdata(file);
- struct qcam_device *qcam = (struct qcam_device *)dev;
-
- return test_and_set_bit(0, &qcam->in_use) ? -EBUSY : 0;
-}
-
-static int qcam_exclusive_release(struct file *file)
-{
- struct video_device *dev = video_devdata(file);
- struct qcam_device *qcam = (struct qcam_device *)dev;
-
- clear_bit(0, &qcam->in_use);
- return 0;
-}
-
-/* video device template */
static const struct v4l2_file_operations qcam_fops = {
.owner = THIS_MODULE,
- .open = qcam_exclusive_open,
- .release = qcam_exclusive_release,
- .ioctl = qcam_ioctl,
+ .ioctl = video_ioctl2,
.read = qcam_read,
};
-static struct video_device qcam_template = {
- .name = "Colour QuickCam",
- .fops = &qcam_fops,
- .release = video_device_release_empty,
+static const struct v4l2_ioctl_ops qcam_ioctl_ops = {
+ .vidioc_querycap = qcam_querycap,
+ .vidioc_g_input = qcam_g_input,
+ .vidioc_s_input = qcam_s_input,
+ .vidioc_enum_input = qcam_enum_input,
+ .vidioc_queryctrl = qcam_queryctrl,
+ .vidioc_g_ctrl = qcam_g_ctrl,
+ .vidioc_s_ctrl = qcam_s_ctrl,
+ .vidioc_enum_fmt_vid_cap = qcam_enum_fmt_vid_cap,
+ .vidioc_g_fmt_vid_cap = qcam_g_fmt_vid_cap,
+ .vidioc_s_fmt_vid_cap = qcam_s_fmt_vid_cap,
+ .vidioc_try_fmt_vid_cap = qcam_try_fmt_vid_cap,
};
/* Initialize the QuickCam driver control structure. */
-static struct qcam_device *qcam_init(struct parport *port)
+static struct qcam *qcam_init(struct parport *port)
{
- struct qcam_device *q;
+ struct qcam *qcam;
+ struct v4l2_device *v4l2_dev;
- q = kmalloc(sizeof(struct qcam_device), GFP_KERNEL);
- if (q == NULL)
+ qcam = kzalloc(sizeof(*qcam), GFP_KERNEL);
+ if (qcam == NULL)
return NULL;
- q->pport = port;
- q->pdev = parport_register_device(port, "c-qcam", NULL, NULL,
- NULL, 0, NULL);
+ v4l2_dev = &qcam->v4l2_dev;
+ strlcpy(v4l2_dev->name, "c-qcam", sizeof(v4l2_dev->name));
- q->bidirectional = (q->pport->modes & PARPORT_MODE_TRISTATE) ? 1 : 0;
-
- if (q->pdev == NULL) {
- printk(KERN_ERR "c-qcam: couldn't register for %s.\n",
- port->name);
- kfree(q);
+ if (v4l2_device_register(NULL, v4l2_dev) < 0) {
+ v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
return NULL;
}
- memcpy(&q->vdev, &qcam_template, sizeof(qcam_template));
+ qcam->pport = port;
+ qcam->pdev = parport_register_device(port, "c-qcam", NULL, NULL,
+ NULL, 0, NULL);
- mutex_init(&q->lock);
- q->width = q->ccd_width = 320;
- q->height = q->ccd_height = 240;
- q->mode = QC_MILLIONS | QC_DECIMATION_1;
- q->contrast = 192;
- q->brightness = 240;
- q->whitebal = 128;
- q->top = 1;
- q->left = 14;
- return q;
+ qcam->bidirectional = (qcam->pport->modes & PARPORT_MODE_TRISTATE) ? 1 : 0;
+
+ if (qcam->pdev == NULL) {
+ v4l2_err(v4l2_dev, "couldn't register for %s.\n", port->name);
+ kfree(qcam);
+ return NULL;
+ }
+
+ strlcpy(qcam->vdev.name, "Colour QuickCam", sizeof(qcam->vdev.name));
+ qcam->vdev.v4l2_dev = v4l2_dev;
+ qcam->vdev.fops = &qcam_fops;
+ qcam->vdev.ioctl_ops = &qcam_ioctl_ops;
+ qcam->vdev.release = video_device_release_empty;
+ video_set_drvdata(&qcam->vdev, qcam);
+
+ mutex_init(&qcam->lock);
+ qcam->width = qcam->ccd_width = 320;
+ qcam->height = qcam->ccd_height = 240;
+ qcam->mode = QC_MILLIONS | QC_DECIMATION_1;
+ qcam->contrast = 192;
+ qcam->brightness = 240;
+ qcam->whitebal = 128;
+ qcam->top = 1;
+ qcam->left = 14;
+ return qcam;
}
-static struct qcam_device *qcams[MAX_CAMS];
-static unsigned int num_cams;
-
static int init_cqcam(struct parport *port)
{
- struct qcam_device *qcam;
+ struct qcam *qcam;
+ struct v4l2_device *v4l2_dev;
if (parport[0] != -1) {
/* The user gave specific instructions */
@@ -777,6 +810,8 @@
if (qcam == NULL)
return -ENODEV;
+ v4l2_dev = &qcam->v4l2_dev;
+
parport_claim_or_block(qcam->pdev);
qc_reset(qcam);
@@ -793,14 +828,14 @@
parport_release(qcam->pdev);
if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
- printk(KERN_ERR "Unable to register Colour QuickCam on %s\n",
+ v4l2_err(v4l2_dev, "Unable to register Colour QuickCam on %s\n",
qcam->pport->name);
parport_unregister_device(qcam->pdev);
kfree(qcam);
return -ENODEV;
}
- printk(KERN_INFO "%s: Colour QuickCam found on %s\n",
+ v4l2_info(v4l2_dev, "%s: Colour QuickCam found on %s\n",
video_device_node_name(&qcam->vdev), qcam->pport->name);
qcams[num_cams++] = qcam;
@@ -808,7 +843,7 @@
return 0;
}
-static void close_cqcam(struct qcam_device *qcam)
+static void close_cqcam(struct qcam *qcam)
{
video_unregister_device(&qcam->vdev);
parport_unregister_device(qcam->pdev);
@@ -833,7 +868,7 @@
static int __init cqcam_init(void)
{
- printk(BANNER "\n");
+ printk(KERN_INFO BANNER "\n");
return parport_register_driver(&cqcam_driver);
}
@@ -852,14 +887,5 @@
MODULE_DESCRIPTION(BANNER);
MODULE_LICENSE("GPL");
-/* FIXME: parport=auto would never have worked, surely? --RR */
-MODULE_PARM_DESC(parport, "parport=<auto|n[,n]...> for port detection method\n"
- "probe=<0|1|2> for camera detection method\n"
- "force_rgb=<0|1> for RGB data format (default BGR)");
-module_param_array(parport, int, NULL, 0);
-module_param(probe, int, 0);
-module_param(force_rgb, bool, 0);
-module_param(video_nr, int, 0);
-
module_init(cqcam_init);
module_exit(cqcam_cleanup);
diff --git a/drivers/media/video/cx18/cx18-alsa-main.c b/drivers/media/video/cx18/cx18-alsa-main.c
index b5d7cbf..d50d69d 100644
--- a/drivers/media/video/cx18/cx18-alsa-main.c
+++ b/drivers/media/video/cx18/cx18-alsa-main.c
@@ -1,7 +1,7 @@
/*
* ALSA interface to cx18 PCM capture streams
*
- * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2009 Andy Walls <awalls@md.metrocast.net>
* Copyright (C) 2009 Devin Heitmueller <dheitmueller@kernellabs.com>
*
* Portions of this work were sponsored by ONELAN Limited.
diff --git a/drivers/media/video/cx18/cx18-alsa-mixer.c b/drivers/media/video/cx18/cx18-alsa-mixer.c
index ef21114..341bddc 100644
--- a/drivers/media/video/cx18/cx18-alsa-mixer.c
+++ b/drivers/media/video/cx18/cx18-alsa-mixer.c
@@ -2,7 +2,7 @@
* ALSA mixer controls for the
* ALSA interface to cx18 PCM capture streams
*
- * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2009 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-alsa-mixer.h b/drivers/media/video/cx18/cx18-alsa-mixer.h
index 2d418db..ec92387 100644
--- a/drivers/media/video/cx18/cx18-alsa-mixer.h
+++ b/drivers/media/video/cx18/cx18-alsa-mixer.h
@@ -2,7 +2,7 @@
* ALSA mixer controls for the
* ALSA interface to cx18 PCM capture streams
*
- * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2009 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-alsa-pcm.c b/drivers/media/video/cx18/cx18-alsa-pcm.c
index 2bd312d..8f55692 100644
--- a/drivers/media/video/cx18/cx18-alsa-pcm.c
+++ b/drivers/media/video/cx18/cx18-alsa-pcm.c
@@ -2,7 +2,7 @@
* ALSA PCM device for the
* ALSA interface to cx18 PCM capture streams
*
- * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2009 Andy Walls <awalls@md.metrocast.net>
* Copyright (C) 2009 Devin Heitmueller <dheitmueller@kernellabs.com>
*
* Portions of this work were sponsored by ONELAN Limited.
diff --git a/drivers/media/video/cx18/cx18-alsa-pcm.h b/drivers/media/video/cx18/cx18-alsa-pcm.h
index 325662c..d26e51f 100644
--- a/drivers/media/video/cx18/cx18-alsa-pcm.h
+++ b/drivers/media/video/cx18/cx18-alsa-pcm.h
@@ -2,7 +2,7 @@
* ALSA PCM device for the
* ALSA interface to cx18 PCM capture streams
*
- * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2009 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-alsa.h b/drivers/media/video/cx18/cx18-alsa.h
index 88a1cde..447da37 100644
--- a/drivers/media/video/cx18/cx18-alsa.h
+++ b/drivers/media/video/cx18/cx18-alsa.h
@@ -1,7 +1,7 @@
/*
* ALSA interface to cx18 PCM capture streams
*
- * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2009 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-av-audio.c b/drivers/media/video/cx18/cx18-av-audio.c
index 9e30983..43d09a2 100644
--- a/drivers/media/video/cx18/cx18-av-audio.c
+++ b/drivers/media/video/cx18/cx18-av-audio.c
@@ -4,7 +4,7 @@
* Derived from cx25840-audio.c
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c
index 0e5006b..a41951c 100644
--- a/drivers/media/video/cx18/cx18-av-core.c
+++ b/drivers/media/video/cx18/cx18-av-core.c
@@ -4,7 +4,7 @@
* Derived from cx25840-core.c
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -1021,86 +1021,74 @@
return -EINVAL;
}
-static int cx18_av_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
- if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
- return -EINVAL;
- return cx18_av_g_sliced_fmt(sd, &fmt->fmt.sliced);
-}
-
-static int cx18_av_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+static int cx18_av_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
{
struct cx18_av_state *state = to_cx18_av_state(sd);
struct cx18 *cx = v4l2_get_subdevdata(sd);
-
- struct v4l2_pix_format *pix;
int HSC, VSC, Vsrc, Hsrc, filter, Vlines;
int is_50Hz = !(state->std & V4L2_STD_525_60);
- switch (fmt->type) {
- case V4L2_BUF_TYPE_VIDEO_CAPTURE:
- pix = &(fmt->fmt.pix);
-
- Vsrc = (cx18_av_read(cx, 0x476) & 0x3f) << 4;
- Vsrc |= (cx18_av_read(cx, 0x475) & 0xf0) >> 4;
-
- Hsrc = (cx18_av_read(cx, 0x472) & 0x3f) << 4;
- Hsrc |= (cx18_av_read(cx, 0x471) & 0xf0) >> 4;
-
- /*
- * This adjustment reflects the excess of vactive, set in
- * cx18_av_std_setup(), above standard values:
- *
- * 480 + 1 for 60 Hz systems
- * 576 + 3 for 50 Hz systems
- */
- Vlines = pix->height + (is_50Hz ? 3 : 1);
-
- /*
- * Invalid height and width scaling requests are:
- * 1. width less than 1/16 of the source width
- * 2. width greater than the source width
- * 3. height less than 1/8 of the source height
- * 4. height greater than the source height
- */
- if ((pix->width * 16 < Hsrc) || (Hsrc < pix->width) ||
- (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) {
- CX18_ERR_DEV(sd, "%dx%d is not a valid size!\n",
- pix->width, pix->height);
- return -ERANGE;
- }
-
- HSC = (Hsrc * (1 << 20)) / pix->width - (1 << 20);
- VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9));
- VSC &= 0x1fff;
-
- if (pix->width >= 385)
- filter = 0;
- else if (pix->width > 192)
- filter = 1;
- else if (pix->width > 96)
- filter = 2;
- else
- filter = 3;
-
- CX18_DEBUG_INFO_DEV(sd,
- "decoder set size %dx%d -> scale %ux%u\n",
- pix->width, pix->height, HSC, VSC);
-
- /* HSCALE=HSC */
- cx18_av_write(cx, 0x418, HSC & 0xff);
- cx18_av_write(cx, 0x419, (HSC >> 8) & 0xff);
- cx18_av_write(cx, 0x41a, HSC >> 16);
- /* VSCALE=VSC */
- cx18_av_write(cx, 0x41c, VSC & 0xff);
- cx18_av_write(cx, 0x41d, VSC >> 8);
- /* VS_INTRLACE=1 VFILT=filter */
- cx18_av_write(cx, 0x41e, 0x8 | filter);
- break;
-
- default:
+ if (fmt->code != V4L2_MBUS_FMT_FIXED)
return -EINVAL;
+
+ fmt->field = V4L2_FIELD_INTERLACED;
+ fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
+
+ Vsrc = (cx18_av_read(cx, 0x476) & 0x3f) << 4;
+ Vsrc |= (cx18_av_read(cx, 0x475) & 0xf0) >> 4;
+
+ Hsrc = (cx18_av_read(cx, 0x472) & 0x3f) << 4;
+ Hsrc |= (cx18_av_read(cx, 0x471) & 0xf0) >> 4;
+
+ /*
+ * This adjustment reflects the excess of vactive, set in
+ * cx18_av_std_setup(), above standard values:
+ *
+ * 480 + 1 for 60 Hz systems
+ * 576 + 3 for 50 Hz systems
+ */
+ Vlines = fmt->height + (is_50Hz ? 3 : 1);
+
+ /*
+ * Invalid height and width scaling requests are:
+ * 1. width less than 1/16 of the source width
+ * 2. width greater than the source width
+ * 3. height less than 1/8 of the source height
+ * 4. height greater than the source height
+ */
+ if ((fmt->width * 16 < Hsrc) || (Hsrc < fmt->width) ||
+ (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) {
+ CX18_ERR_DEV(sd, "%dx%d is not a valid size!\n",
+ fmt->width, fmt->height);
+ return -ERANGE;
}
+
+ HSC = (Hsrc * (1 << 20)) / fmt->width - (1 << 20);
+ VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9));
+ VSC &= 0x1fff;
+
+ if (fmt->width >= 385)
+ filter = 0;
+ else if (fmt->width > 192)
+ filter = 1;
+ else if (fmt->width > 96)
+ filter = 2;
+ else
+ filter = 3;
+
+ CX18_DEBUG_INFO_DEV(sd,
+ "decoder set size %dx%d -> scale %ux%u\n",
+ fmt->width, fmt->height, HSC, VSC);
+
+ /* HSCALE=HSC */
+ cx18_av_write(cx, 0x418, HSC & 0xff);
+ cx18_av_write(cx, 0x419, (HSC >> 8) & 0xff);
+ cx18_av_write(cx, 0x41a, HSC >> 16);
+ /* VSCALE=VSC */
+ cx18_av_write(cx, 0x41c, VSC & 0xff);
+ cx18_av_write(cx, 0x41d, VSC >> 8);
+ /* VS_INTRLACE=1 VFILT=filter */
+ cx18_av_write(cx, 0x41e, 0x8 | filter);
return 0;
}
@@ -1398,8 +1386,7 @@
static const struct v4l2_subdev_video_ops cx18_av_video_ops = {
.s_routing = cx18_av_s_video_routing,
.s_stream = cx18_av_s_stream,
- .g_fmt = cx18_av_g_fmt,
- .s_fmt = cx18_av_s_fmt,
+ .s_mbus_fmt = cx18_av_s_mbus_fmt,
};
static const struct v4l2_subdev_vbi_ops cx18_av_vbi_ops = {
diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h
index c106967..1956991 100644
--- a/drivers/media/video/cx18/cx18-av-core.h
+++ b/drivers/media/video/cx18/cx18-av-core.h
@@ -4,7 +4,7 @@
* Derived from cx25840-core.h
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx18/cx18-av-firmware.c b/drivers/media/video/cx18/cx18-av-firmware.c
index b9e8cc5..280aa4d 100644
--- a/drivers/media/video/cx18/cx18-av-firmware.c
+++ b/drivers/media/video/cx18/cx18-av-firmware.c
@@ -2,7 +2,7 @@
* cx18 ADEC firmware functions
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index 74e122b..6b805af 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -4,7 +4,7 @@
* Derived from ivtv-cards.c
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-cards.h b/drivers/media/video/cx18/cx18-cards.h
index 796e517..3e75006 100644
--- a/drivers/media/video/cx18/cx18-cards.h
+++ b/drivers/media/video/cx18/cx18-cards.h
@@ -4,7 +4,7 @@
* Derived from ivtv-cards.c
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c
index 4b4b465..67043c7 100644
--- a/drivers/media/video/cx18/cx18-controls.c
+++ b/drivers/media/video/cx18/cx18-controls.c
@@ -297,14 +297,13 @@
if (p.video_encoding != cx->params.video_encoding) {
int is_mpeg1 = p.video_encoding ==
V4L2_MPEG_VIDEO_ENCODING_MPEG_1;
- struct v4l2_format fmt;
+ struct v4l2_mbus_framefmt fmt;
/* fix videodecoder resolution */
- fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- fmt.fmt.pix.width = cx->params.width
- / (is_mpeg1 ? 2 : 1);
- fmt.fmt.pix.height = cx->params.height;
- v4l2_subdev_call(cx->sd_av, video, s_fmt, &fmt);
+ fmt.width = cx->params.width / (is_mpeg1 ? 2 : 1);
+ fmt.height = cx->params.height;
+ fmt.code = V4L2_MBUS_FMT_FIXED;
+ v4l2_subdev_call(cx->sd_av, video, s_mbus_fmt, &fmt);
}
priv.cx = cx;
priv.s = &cx->streams[id->type];
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index c95a86b..df60f27 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -4,7 +4,7 @@
* Derived from ivtv-driver.c
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index b9728e8..9bc51a9 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -4,7 +4,7 @@
* Derived from ivtv-driver.h
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index 0ae2c2e..6d19f04 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -2,7 +2,7 @@
* cx18 functions for DVB support
*
* Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c
index e12a150..9f23b90 100644
--- a/drivers/media/video/cx18/cx18-fileops.c
+++ b/drivers/media/video/cx18/cx18-fileops.c
@@ -4,7 +4,7 @@
* Derived from ivtv-fileops.c
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-firmware.c b/drivers/media/video/cx18/cx18-firmware.c
index 83cd559..1b3fb50 100644
--- a/drivers/media/video/cx18/cx18-firmware.c
+++ b/drivers/media/video/cx18/cx18-firmware.c
@@ -2,7 +2,7 @@
* cx18 firmware functions
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c
index 86a204b..5374aeb 100644
--- a/drivers/media/video/cx18/cx18-gpio.c
+++ b/drivers/media/video/cx18/cx18-gpio.c
@@ -4,7 +4,7 @@
* Derived from ivtv-gpio.c
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-gpio.h b/drivers/media/video/cx18/cx18-gpio.h
index f9a5ca3..4aea2ef 100644
--- a/drivers/media/video/cx18/cx18-gpio.h
+++ b/drivers/media/video/cx18/cx18-gpio.h
@@ -4,7 +4,7 @@
* Derived from ivtv-gpio.h
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c
index cfa1f28..809f7d3 100644
--- a/drivers/media/video/cx18/cx18-i2c.c
+++ b/drivers/media/video/cx18/cx18-i2c.c
@@ -4,7 +4,7 @@
* Derived from ivtv-i2c.c
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-io.c b/drivers/media/video/cx18/cx18-io.c
index ec5b3d7..49b9dbd 100644
--- a/drivers/media/video/cx18/cx18-io.c
+++ b/drivers/media/video/cx18/cx18-io.c
@@ -2,7 +2,7 @@
* cx18 driver PCI memory mapped IO access routines
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-io.h b/drivers/media/video/cx18/cx18-io.h
index 2635b3a..18974d8 100644
--- a/drivers/media/video/cx18/cx18-io.h
+++ b/drivers/media/video/cx18/cx18-io.h
@@ -2,7 +2,7 @@
* cx18 driver PCI memory mapped IO access routines
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -28,7 +28,7 @@
/*
* Readback and retry of MMIO access for reliability:
* The concept was suggested by Steve Toth <stoth@linuxtv.org>.
- * The implmentation is the fault of Andy Walls <awalls@radix.net>.
+ * The implmentation is the fault of Andy Walls <awalls@md.metrocast.net>.
*
* *write* functions are implied to retry the mmio unless suffixed with _noretry
* *read* functions never retry the mmio (it never helps to do so)
diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c
index 2530fc5..20eaf38 100644
--- a/drivers/media/video/cx18/cx18-ioctl.c
+++ b/drivers/media/video/cx18/cx18-ioctl.c
@@ -4,7 +4,7 @@
* Derived from ivtv-ioctl.c
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -274,6 +274,7 @@
{
struct cx18_open_id *id = fh;
struct cx18 *cx = id->cx;
+ struct v4l2_mbus_framefmt mbus_fmt;
int ret;
int w, h;
@@ -293,9 +294,10 @@
if (atomic_read(&cx->ana_capturing) > 0)
return -EBUSY;
- cx->params.width = w;
- cx->params.height = h;
- v4l2_subdev_call(cx->sd_av, video, s_fmt, fmt);
+ mbus_fmt.width = cx->params.width = w;
+ mbus_fmt.height = cx->params.height = h;
+ mbus_fmt.code = V4L2_MBUS_FMT_FIXED;
+ v4l2_subdev_call(cx->sd_av, video, s_mbus_fmt, &mbus_fmt);
return cx18_g_fmt_vid_cap(file, fh, fmt);
}
diff --git a/drivers/media/video/cx18/cx18-ioctl.h b/drivers/media/video/cx18/cx18-ioctl.h
index e2ca0d1..dcb2559 100644
--- a/drivers/media/video/cx18/cx18-ioctl.h
+++ b/drivers/media/video/cx18/cx18-ioctl.h
@@ -4,7 +4,7 @@
* Derived from ivtv-ioctl.h
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c
index af2f504..80edfe9 100644
--- a/drivers/media/video/cx18/cx18-irq.c
+++ b/drivers/media/video/cx18/cx18-irq.c
@@ -2,7 +2,7 @@
* cx18 interrupt handling
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-irq.h b/drivers/media/video/cx18/cx18-irq.h
index 91f0b52..30e7eaf 100644
--- a/drivers/media/video/cx18/cx18-irq.h
+++ b/drivers/media/video/cx18/cx18-irq.h
@@ -2,7 +2,7 @@
* cx18 interrupt handling
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c
index 6dcce29..956aa19 100644
--- a/drivers/media/video/cx18/cx18-mailbox.c
+++ b/drivers/media/video/cx18/cx18-mailbox.c
@@ -2,7 +2,7 @@
* cx18 mailbox functions
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-mailbox.h b/drivers/media/video/cx18/cx18-mailbox.h
index 33a3491..077952f 100644
--- a/drivers/media/video/cx18/cx18-mailbox.h
+++ b/drivers/media/video/cx18/cx18-mailbox.h
@@ -2,7 +2,7 @@
* cx18 mailbox functions
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c
index aefc8c8..8884537 100644
--- a/drivers/media/video/cx18/cx18-queue.c
+++ b/drivers/media/video/cx18/cx18-queue.c
@@ -4,7 +4,7 @@
* Derived from ivtv-queue.c
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-queue.h b/drivers/media/video/cx18/cx18-queue.h
index 88a6d34..4201ddc 100644
--- a/drivers/media/video/cx18/cx18-queue.h
+++ b/drivers/media/video/cx18/cx18-queue.h
@@ -4,7 +4,7 @@
* Derived from ivtv-queue.h
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-scb.c b/drivers/media/video/cx18/cx18-scb.c
index 34b4d03..85cc596 100644
--- a/drivers/media/video/cx18/cx18-scb.c
+++ b/drivers/media/video/cx18/cx18-scb.c
@@ -2,7 +2,7 @@
* cx18 System Control Block initialization
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-scb.h b/drivers/media/video/cx18/cx18-scb.h
index 368f23d..0887765 100644
--- a/drivers/media/video/cx18/cx18-scb.h
+++ b/drivers/media/video/cx18/cx18-scb.h
@@ -2,7 +2,7 @@
* cx18 System Control Block initialization
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index f5c9126..9045f1e 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -4,7 +4,7 @@
* Derived from ivtv-streams.c
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-streams.h b/drivers/media/video/cx18/cx18-streams.h
index 0bff0fa..77412be 100644
--- a/drivers/media/video/cx18/cx18-streams.h
+++ b/drivers/media/video/cx18/cx18-streams.h
@@ -4,7 +4,7 @@
* Derived from ivtv-streams.h
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- * Copyright (C) 2008 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/video/cx231xx/cx231xx-video.c
index 2782709..e760145 100644
--- a/drivers/media/video/cx231xx/cx231xx-video.c
+++ b/drivers/media/video/cx231xx/cx231xx-video.c
@@ -993,6 +993,7 @@
struct cx231xx *dev = fh->dev;
int rc;
struct cx231xx_fmt *fmt;
+ struct v4l2_mbus_framefmt mbus_fmt;
rc = check_dev(dev);
if (rc < 0)
@@ -1026,7 +1027,9 @@
dev->format = fmt;
get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
- call_all(dev, video, s_fmt, f);
+ v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, V4L2_MBUS_FMT_FIXED);
+ call_all(dev, video, s_mbus_fmt, &mbus_fmt);
+ v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt);
/* Set the correct alternate setting for this resolution */
cx231xx_resolution_set(dev);
diff --git a/drivers/media/video/cx2341x.c b/drivers/media/video/cx2341x.c
index 022b480..2bf44ef 100644
--- a/drivers/media/video/cx2341x.c
+++ b/drivers/media/video/cx2341x.c
@@ -1113,7 +1113,6 @@
void cx2341x_log_status(const struct cx2341x_mpeg_params *p, const char *prefix)
{
int is_mpeg1 = p->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1;
- int temporal = p->video_temporal_filter;
/* Stream */
printk(KERN_INFO "%s: Stream: %s",
@@ -1179,14 +1178,11 @@
V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE),
p->video_spatial_filter);
- if (p->width != 720 || p->height != (p->is_50hz ? 576 : 480))
- temporal = 0;
-
printk(KERN_INFO "%s: Temporal Filter: %s, %d\n",
prefix,
cx2341x_menu_item(p,
V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE),
- temporal);
+ p->video_temporal_filter);
printk(KERN_INFO
"%s: Median Filter: %s, Luma [%d, %d], Chroma [%d, %d]\n",
prefix,
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 9e14608..0a199d7 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -991,6 +991,8 @@
ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port,
&dev->pci->dev, adapter_nr, 0,
cx23885_dvb_fe_ioctl_override);
+ if (!ret)
+ return ret;
/* init CI & MAC */
switch (dev->board) {
diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c
index 4172cb3..d4746e0 100644
--- a/drivers/media/video/cx23885/cx23885-i2c.c
+++ b/drivers/media/video/cx23885/cx23885-i2c.c
@@ -365,7 +365,17 @@
memset(&info, 0, sizeof(struct i2c_board_info));
strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
- i2c_new_probed_device(&bus->i2c_adap, &info, addr_list);
+ /*
+ * We can't call i2c_new_probed_device() because it uses
+ * quick writes for probing and the IR receiver device only
+ * replies to reads.
+ */
+ if (i2c_smbus_xfer(&bus->i2c_adap, addr_list[0], 0,
+ I2C_SMBUS_READ, 0, I2C_SMBUS_QUICK,
+ NULL) >= 0) {
+ info.addr = addr_list[0];
+ i2c_new_device(&bus->i2c_adap, &info);
+ }
}
return bus->i2c_rc;
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index 8d306d8..5de6ba9 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -5,7 +5,7 @@
*
* Most of this file is
*
- * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2009 Andy Walls <awalls@md.metrocast.net>
*
* However, the cx23885_input_{init,fini} functions contained herein are
* derived from Linux kernel files linux/media/video/.../...-input.c marked as:
diff --git a/drivers/media/video/cx23885/cx23885-input.h b/drivers/media/video/cx23885/cx23885-input.h
index 3572cb1..75ef15d 100644
--- a/drivers/media/video/cx23885/cx23885-input.h
+++ b/drivers/media/video/cx23885/cx23885-input.h
@@ -3,7 +3,7 @@
*
* Infrared remote control input device
*
- * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2009 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx23885/cx23885-ioctl.c b/drivers/media/video/cx23885/cx23885-ioctl.c
index dfb4627..44812ca 100644
--- a/drivers/media/video/cx23885/cx23885-ioctl.c
+++ b/drivers/media/video/cx23885/cx23885-ioctl.c
@@ -3,7 +3,7 @@
*
* Various common ioctl() support functions
*
- * Copyright (c) 2009 Andy Walls <awalls@radix.net>
+ * Copyright (c) 2009 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx23885/cx23885-ioctl.h b/drivers/media/video/cx23885/cx23885-ioctl.h
index 80b0f49..315be0c 100644
--- a/drivers/media/video/cx23885/cx23885-ioctl.h
+++ b/drivers/media/video/cx23885/cx23885-ioctl.h
@@ -3,7 +3,7 @@
*
* Various common ioctl() support functions
*
- * Copyright (c) 2009 Andy Walls <awalls@radix.net>
+ * Copyright (c) 2009 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx23885/cx23885-ir.c b/drivers/media/video/cx23885/cx23885-ir.c
index 6ae982c..9a677eb 100644
--- a/drivers/media/video/cx23885/cx23885-ir.c
+++ b/drivers/media/video/cx23885/cx23885-ir.c
@@ -3,7 +3,7 @@
*
* Infrared device support routines - non-input, non-vl42_subdev routines
*
- * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2009 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx23885/cx23885-ir.h b/drivers/media/video/cx23885/cx23885-ir.h
index 9b8a6d5..0c9d8bd 100644
--- a/drivers/media/video/cx23885/cx23885-ir.h
+++ b/drivers/media/video/cx23885/cx23885-ir.h
@@ -3,7 +3,7 @@
*
* Infrared device support routines - non-input, non-vl42_subdev routines
*
- * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2009 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 543b854..4e44dcd 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -976,6 +976,7 @@
{
struct cx23885_fh *fh = priv;
struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev;
+ struct v4l2_mbus_framefmt mbus_fmt;
int err;
dprintk(2, "%s()\n", __func__);
@@ -989,7 +990,9 @@
fh->vidq.field = f->fmt.pix.field;
dprintk(2, "%s() width=%d height=%d field=%d\n", __func__,
fh->width, fh->height, fh->vidq.field);
- call_all(dev, video, s_fmt, f);
+ v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, V4L2_MBUS_FMT_FIXED);
+ call_all(dev, video, s_mbus_fmt, &mbus_fmt);
+ v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt);
return 0;
}
diff --git a/drivers/media/video/cx23885/cx23888-ir.c b/drivers/media/video/cx23885/cx23888-ir.c
index ad728d7..f63d378 100644
--- a/drivers/media/video/cx23885/cx23888-ir.c
+++ b/drivers/media/video/cx23885/cx23888-ir.c
@@ -3,7 +3,7 @@
*
* CX23888 Integrated Consumer Infrared Controller
*
- * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2009 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx23885/cx23888-ir.h b/drivers/media/video/cx23885/cx23888-ir.h
index 3d446f9..d2de41c 100644
--- a/drivers/media/video/cx23885/cx23888-ir.h
+++ b/drivers/media/video/cx23885/cx23888-ir.h
@@ -3,7 +3,7 @@
*
* CX23888 Integrated Consumer Infrared Controller
*
- * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ * Copyright (C) 2009 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 8b6fb35..bb4872b 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -1014,75 +1014,59 @@
/* ----------------------------------------------------------------------- */
-static int cx25840_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
- switch (fmt->type) {
- case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
- return cx25840_g_sliced_fmt(sd, &fmt->fmt.sliced);
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static int cx25840_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+static int cx25840_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
{
struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct v4l2_pix_format *pix;
int HSC, VSC, Vsrc, Hsrc, filter, Vlines;
int is_50Hz = !(state->std & V4L2_STD_525_60);
- switch (fmt->type) {
- case V4L2_BUF_TYPE_VIDEO_CAPTURE:
- pix = &(fmt->fmt.pix);
-
- Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4;
- Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4;
-
- Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4;
- Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4;
-
- Vlines = pix->height + (is_50Hz ? 4 : 7);
-
- if ((pix->width * 16 < Hsrc) || (Hsrc < pix->width) ||
- (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) {
- v4l_err(client, "%dx%d is not a valid size!\n",
- pix->width, pix->height);
- return -ERANGE;
- }
-
- HSC = (Hsrc * (1 << 20)) / pix->width - (1 << 20);
- VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9));
- VSC &= 0x1fff;
-
- if (pix->width >= 385)
- filter = 0;
- else if (pix->width > 192)
- filter = 1;
- else if (pix->width > 96)
- filter = 2;
- else
- filter = 3;
-
- v4l_dbg(1, cx25840_debug, client, "decoder set size %dx%d -> scale %ux%u\n",
- pix->width, pix->height, HSC, VSC);
-
- /* HSCALE=HSC */
- cx25840_write(client, 0x418, HSC & 0xff);
- cx25840_write(client, 0x419, (HSC >> 8) & 0xff);
- cx25840_write(client, 0x41a, HSC >> 16);
- /* VSCALE=VSC */
- cx25840_write(client, 0x41c, VSC & 0xff);
- cx25840_write(client, 0x41d, VSC >> 8);
- /* VS_INTRLACE=1 VFILT=filter */
- cx25840_write(client, 0x41e, 0x8 | filter);
- break;
-
- default:
+ if (fmt->code != V4L2_MBUS_FMT_FIXED)
return -EINVAL;
+
+ fmt->field = V4L2_FIELD_INTERLACED;
+ fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
+
+ Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4;
+ Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4;
+
+ Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4;
+ Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4;
+
+ Vlines = fmt->height + (is_50Hz ? 4 : 7);
+
+ if ((fmt->width * 16 < Hsrc) || (Hsrc < fmt->width) ||
+ (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) {
+ v4l_err(client, "%dx%d is not a valid size!\n",
+ fmt->width, fmt->height);
+ return -ERANGE;
}
+ HSC = (Hsrc * (1 << 20)) / fmt->width - (1 << 20);
+ VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9));
+ VSC &= 0x1fff;
+
+ if (fmt->width >= 385)
+ filter = 0;
+ else if (fmt->width > 192)
+ filter = 1;
+ else if (fmt->width > 96)
+ filter = 2;
+ else
+ filter = 3;
+
+ v4l_dbg(1, cx25840_debug, client, "decoder set size %dx%d -> scale %ux%u\n",
+ fmt->width, fmt->height, HSC, VSC);
+
+ /* HSCALE=HSC */
+ cx25840_write(client, 0x418, HSC & 0xff);
+ cx25840_write(client, 0x419, (HSC >> 8) & 0xff);
+ cx25840_write(client, 0x41a, HSC >> 16);
+ /* VSCALE=VSC */
+ cx25840_write(client, 0x41c, VSC & 0xff);
+ cx25840_write(client, 0x41d, VSC >> 8);
+ /* VS_INTRLACE=1 VFILT=filter */
+ cx25840_write(client, 0x41e, 0x8 | filter);
return 0;
}
@@ -1627,8 +1611,7 @@
static const struct v4l2_subdev_video_ops cx25840_video_ops = {
.s_routing = cx25840_s_video_routing,
- .g_fmt = cx25840_g_fmt,
- .s_fmt = cx25840_s_fmt,
+ .s_mbus_fmt = cx25840_s_mbus_fmt,
.s_stream = cx25840_s_stream,
};
diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c
index ee1ca39..fb39f11 100644
--- a/drivers/media/video/cx88/cx88-i2c.c
+++ b/drivers/media/video/cx88/cx88-i2c.c
@@ -188,10 +188,24 @@
0x18, 0x6b, 0x71,
I2C_CLIENT_END
};
+ const unsigned short *addrp;
memset(&info, 0, sizeof(struct i2c_board_info));
strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
- i2c_new_probed_device(&core->i2c_adap, &info, addr_list);
+ /*
+ * We can't call i2c_new_probed_device() because it uses
+ * quick writes for probing and at least some R receiver
+ * devices only reply to reads.
+ */
+ for (addrp = addr_list; *addrp != I2C_CLIENT_END; addrp++) {
+ if (i2c_smbus_xfer(&core->i2c_adap, *addrp, 0,
+ I2C_SMBUS_READ, 0,
+ I2C_SMBUS_QUICK, NULL) >= 0) {
+ info.addr = *addrp;
+ i2c_new_device(&core->i2c_adap, &info);
+ break;
+ }
+ }
}
return core->i2c_rc;
}
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index 331e1ca..44c63cb 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -1186,8 +1186,7 @@
mutex_lock(&em28xx_devlist_mutex);
list_add_tail(&ops->next, &em28xx_extension_devlist);
list_for_each_entry(dev, &em28xx_devlist, devlist) {
- if (dev)
- ops->init(dev);
+ ops->init(dev);
}
printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name);
mutex_unlock(&em28xx_devlist_mutex);
@@ -1201,10 +1200,8 @@
mutex_lock(&em28xx_devlist_mutex);
list_for_each_entry(dev, &em28xx_devlist, devlist) {
- if (dev)
- ops->fini(dev);
+ ops->fini(dev);
}
-
printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name);
list_del(&ops->next);
mutex_unlock(&em28xx_devlist_mutex);
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 785eeb4..95354a3 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -1453,9 +1453,7 @@
{USB_DEVICE(0x0c45, 0x6029), SB(PAS106, 102)},
{USB_DEVICE(0x0c45, 0x602c), SB(OV7630, 102)},
{USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)},
-#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
{USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)},
-#endif
{USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)},
#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
{USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)},
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index bb923ef..176c5b3 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -3022,16 +3022,18 @@
/* {USB_DEVICE(0x0c45, 0x60c2), BS(SN9C105, P1030xC)}, */
/* {USB_DEVICE(0x0c45, 0x60c8), BS(SN9C105, OM6802)}, */
/* {USB_DEVICE(0x0c45, 0x60cc), BS(SN9C105, HV7131GP)}, */
+ {USB_DEVICE(0x0c45, 0x60ce), BS(SN9C105, SP80708)},
{USB_DEVICE(0x0c45, 0x60ec), BS(SN9C105, MO4000)},
/* {USB_DEVICE(0x0c45, 0x60ef), BS(SN9C105, ICM105C)}, */
/* {USB_DEVICE(0x0c45, 0x60fa), BS(SN9C105, OV7648)}, */
+/* {USB_DEVICE(0x0c45, 0x60f2), BS(SN9C105, OV7660)}, */
{USB_DEVICE(0x0c45, 0x60fb), BS(SN9C105, OV7660)},
#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
{USB_DEVICE(0x0c45, 0x60fc), BS(SN9C105, HV7131R)},
{USB_DEVICE(0x0c45, 0x60fe), BS(SN9C105, OV7630)},
#endif
{USB_DEVICE(0x0c45, 0x6100), BS(SN9C120, MI0360)}, /*sn9c128*/
-/* {USB_DEVICE(0x0c45, 0x6102), BS(SN9C120, P1030xC)}, */
+/* {USB_DEVICE(0x0c45, 0x6102), BS(SN9C120, PO2030N)}, * / GC0305*/
/* {USB_DEVICE(0x0c45, 0x6108), BS(SN9C120, OM6802)}, */
{USB_DEVICE(0x0c45, 0x610a), BS(SN9C120, OV7648)}, /*sn9c128*/
{USB_DEVICE(0x0c45, 0x610b), BS(SN9C120, OV7660)}, /*sn9c128*/
@@ -3058,6 +3060,7 @@
{USB_DEVICE(0x0c45, 0x613c), BS(SN9C120, HV7131R)},
{USB_DEVICE(0x0c45, 0x613e), BS(SN9C120, OV7630)},
{USB_DEVICE(0x0c45, 0x6142), BS(SN9C120, PO2030N)}, /*sn9c120b*/
+ /* or GC0305 / GC0307 */
{USB_DEVICE(0x0c45, 0x6143), BS(SN9C120, SP80708)}, /*sn9c120b*/
{USB_DEVICE(0x0c45, 0x6148), BS(SN9C120, OM6802)}, /*sn9c120b*/
{USB_DEVICE(0x0c45, 0x614a), BS(SN9C120, ADCM1700)}, /*sn9c120b*/
diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c
index 7cfccfd..c338f3f 100644
--- a/drivers/media/video/hdpvr/hdpvr-video.c
+++ b/drivers/media/video/hdpvr/hdpvr-video.c
@@ -366,7 +366,7 @@
dev = (struct hdpvr_device *)video_get_drvdata(video_devdata(file));
if (!dev) {
- v4l2_err(&dev->v4l2_dev, "open failing with with ENODEV\n");
+ pr_err("open failing with with ENODEV\n");
retval = -ENODEV;
goto err;
}
diff --git a/drivers/media/video/ivtv/ivtv-controls.c b/drivers/media/video/ivtv/ivtv-controls.c
index b59475bf..b588e30 100644
--- a/drivers/media/video/ivtv/ivtv-controls.c
+++ b/drivers/media/video/ivtv/ivtv-controls.c
@@ -267,13 +267,13 @@
if (p.video_encoding != itv->params.video_encoding) {
int is_mpeg1 = p.video_encoding ==
V4L2_MPEG_VIDEO_ENCODING_MPEG_1;
- struct v4l2_format fmt;
+ struct v4l2_mbus_framefmt fmt;
/* fix videodecoder resolution */
- fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- fmt.fmt.pix.width = itv->params.width / (is_mpeg1 ? 2 : 1);
- fmt.fmt.pix.height = itv->params.height;
- v4l2_subdev_call(itv->sd_video, video, s_fmt, &fmt);
+ fmt.width = itv->params.width / (is_mpeg1 ? 2 : 1);
+ fmt.height = itv->params.height;
+ fmt.code = V4L2_MBUS_FMT_FIXED;
+ v4l2_subdev_call(itv->sd_video, video, s_mbus_fmt, &fmt);
}
err = cx2341x_update(itv, ivtv_api_func, &itv->params, &p);
if (!err && itv->params.stream_vbi_fmt != p.stream_vbi_fmt)
diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c
index abf4109..3c2cc27 100644
--- a/drivers/media/video/ivtv/ivtv-fileops.c
+++ b/drivers/media/video/ivtv/ivtv-fileops.c
@@ -823,6 +823,12 @@
IVTV_DEBUG_FILE("close() of %s\n", s->name);
+ if (id->type == IVTV_DEC_STREAM_TYPE_YUV &&
+ test_bit(IVTV_F_I_DECODING_YUV, &itv->i_flags)) {
+ /* Restore registers we've changed & clean up any mess */
+ ivtv_yuv_close(itv);
+ }
+
/* Stop decoding */
if (test_bit(IVTV_F_S_STREAMING, &s->s_flags)) {
IVTV_DEBUG_INFO("close stopping decode\n");
@@ -832,10 +838,7 @@
}
clear_bit(IVTV_F_S_APPL_IO, &s->s_flags);
clear_bit(IVTV_F_S_STREAMOFF, &s->s_flags);
- if (id->type == IVTV_DEC_STREAM_TYPE_YUV && test_bit(IVTV_F_I_DECODING_YUV, &itv->i_flags)) {
- /* Restore registers we've changed & clean up any mess we've made */
- ivtv_yuv_close(itv);
- }
+
if (itv->output_mode == OUT_UDMA_YUV && id->yuv_frames)
itv->output_mode = OUT_NONE;
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index fa9f0d9..11ac2fa 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -569,6 +569,7 @@
struct ivtv_open_id *id = fh;
struct ivtv *itv = id->itv;
struct cx2341x_mpeg_params *p = &itv->params;
+ struct v4l2_mbus_framefmt mbus_fmt;
int ret = ivtv_try_fmt_vid_cap(file, fh, fmt);
int w = fmt->fmt.pix.width;
int h = fmt->fmt.pix.height;
@@ -586,7 +587,10 @@
p->height = h;
if (p->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1)
fmt->fmt.pix.width /= 2;
- v4l2_subdev_call(itv->sd_video, video, s_fmt, fmt);
+ mbus_fmt.width = fmt->fmt.pix.width;
+ mbus_fmt.height = h;
+ mbus_fmt.code = V4L2_MBUS_FMT_FIXED;
+ v4l2_subdev_call(itv->sd_video, video, s_mbus_fmt, &mbus_fmt);
return ivtv_g_fmt_vid_cap(file, fh, fmt);
}
diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c
index de4288c..a937e2f 100644
--- a/drivers/media/video/ivtv/ivtv-streams.c
+++ b/drivers/media/video/ivtv/ivtv-streams.c
@@ -618,12 +618,17 @@
struct ivtv *itv = s->itv;
struct cx2341x_mpeg_params *p = &itv->params;
int datatype;
+ u16 width;
+ u16 height;
if (s->vdev == NULL)
return -EINVAL;
IVTV_DEBUG_INFO("Setting some initial decoder settings\n");
+ width = p->width;
+ height = p->height;
+
/* set audio mode to left/stereo for dual/stereo mode. */
ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode);
@@ -646,7 +651,14 @@
2 = yuv_from_host */
switch (s->type) {
case IVTV_DEC_STREAM_TYPE_YUV:
- datatype = itv->output_mode == OUT_PASSTHROUGH ? 1 : 2;
+ if (itv->output_mode == OUT_PASSTHROUGH) {
+ datatype = 1;
+ } else {
+ /* Fake size to avoid switching video standard */
+ datatype = 2;
+ width = 720;
+ height = itv->is_out_50hz ? 576 : 480;
+ }
IVTV_DEBUG_INFO("Setup DEC YUV Stream data[0] = %d\n", datatype);
break;
case IVTV_DEC_STREAM_TYPE_MPG:
@@ -655,9 +667,13 @@
break;
}
if (ivtv_vapi(itv, CX2341X_DEC_SET_DECODER_SOURCE, 4, datatype,
- p->width, p->height, p->audio_properties)) {
+ width, height, p->audio_properties)) {
IVTV_DEBUG_WARN("Couldn't initialize decoder source\n");
}
+
+ /* Decoder sometimes dies here, so wait a moment */
+ ivtv_msleep_timeout(10, 0);
+
return 0;
}
@@ -697,6 +713,9 @@
/* start playback */
ivtv_vapi(itv, CX2341X_DEC_START_PLAYBACK, 2, gop_offset, 0);
+ /* Let things settle before we actually start */
+ ivtv_msleep_timeout(10, 0);
+
/* Clear the following Interrupt mask bits for decoding */
ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_DECODE);
IVTV_DEBUG_IRQ("IRQ Mask is now: 0x%08x\n", itv->irqmask);
@@ -893,6 +912,9 @@
clear_bit(IVTV_F_S_STREAMING, &s->s_flags);
ivtv_flush_queues(s);
+ /* decoder needs time to settle */
+ ivtv_msleep_timeout(40, 0);
+
/* decrement decoding */
atomic_dec(&itv->decoding);
diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c
index 49e1a28..9ff3425 100644
--- a/drivers/media/video/ivtv/ivtvfb.c
+++ b/drivers/media/video/ivtv/ivtvfb.c
@@ -1066,7 +1066,11 @@
}
mutex_unlock(&itv->serialize_lock);
- ivtvfb_get_framebuffer(itv, &oi->video_rbase, &oi->video_buffer_size);
+ if (ivtvfb_get_framebuffer(itv, &oi->video_rbase,
+ &oi->video_buffer_size) < 0) {
+ IVTVFB_ERR("Firmware failed to respond\n");
+ return -EIO;
+ }
/* The osd buffer size depends on the number of video buffers allocated
on the PVR350 itself. For now we'll hardcode the smallest osd buffer
@@ -1158,8 +1162,11 @@
}
/* Find & setup the OSD buffer */
- if ((rc = ivtvfb_init_io(itv)))
+ rc = ivtvfb_init_io(itv);
+ if (rc) {
+ ivtvfb_release_buffers(itv);
return rc;
+ }
/* Set the startup video mode information */
if ((rc = ivtvfb_init_vidmode(itv))) {
@@ -1210,6 +1217,7 @@
{
struct v4l2_device *v4l2_dev = dev_get_drvdata(dev);
struct ivtv *itv = container_of(v4l2_dev, struct ivtv, v4l2_dev);
+ struct osd_info *oi = itv->osd_info;
if (itv && (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) {
if (unregister_framebuffer(&itv->osd_info->ivtvfb_info)) {
@@ -1218,7 +1226,7 @@
return 0;
}
IVTVFB_INFO("Unregister framebuffer %d\n", itv->instance);
- ivtvfb_blank(FB_BLANK_POWERDOWN, &itv->osd_info->ivtvfb_info);
+ ivtvfb_blank(FB_BLANK_VSYNC_SUSPEND, &oi->ivtvfb_info);
ivtvfb_release_buffers(itv);
itv->osd_video_pbase = 0;
}
diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c
index 554eaf1..10ddecc 100644
--- a/drivers/media/video/mem2mem_testdev.c
+++ b/drivers/media/video/mem2mem_testdev.c
@@ -988,6 +988,9 @@
goto err_m2m;
}
+ q_data[V4L2_M2M_SRC].fmt = &formats[0];
+ q_data[V4L2_M2M_DST].fmt = &formats[0];
+
return 0;
err_m2m:
diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index b62c0bd..79f096d 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -701,13 +701,13 @@
#endif
};
-static int mt9m001_enum_fmt(struct v4l2_subdev *sd, int index,
+static int mt9m001_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
enum v4l2_mbus_pixelcode *code)
{
struct i2c_client *client = sd->priv;
struct mt9m001 *mt9m001 = to_mt9m001(client);
- if ((unsigned int)index >= mt9m001->num_fmts)
+ if (index >= mt9m001->num_fmts)
return -EINVAL;
*code = mt9m001->fmts[index].code;
@@ -785,7 +785,6 @@
ret = mt9m001_video_probe(icd, client);
if (ret) {
icd->ops = NULL;
- i2c_set_clientdata(client, NULL);
kfree(mt9m001);
}
@@ -799,7 +798,6 @@
icd->ops = NULL;
mt9m001_video_remove(icd);
- i2c_set_clientdata(client, NULL);
client->driver = NULL;
kfree(mt9m001);
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index d35f536..fbd0fc7 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -999,10 +999,10 @@
#endif
};
-static int mt9m111_enum_fmt(struct v4l2_subdev *sd, int index,
+static int mt9m111_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
enum v4l2_mbus_pixelcode *code)
{
- if ((unsigned int)index >= ARRAY_SIZE(mt9m111_colour_fmts))
+ if (index >= ARRAY_SIZE(mt9m111_colour_fmts))
return -EINVAL;
*code = mt9m111_colour_fmts[index].code;
@@ -1068,7 +1068,6 @@
ret = mt9m111_video_probe(icd, client);
if (ret) {
icd->ops = NULL;
- i2c_set_clientdata(client, NULL);
kfree(mt9m111);
}
@@ -1081,7 +1080,6 @@
struct soc_camera_device *icd = client->dev.platform_data;
icd->ops = NULL;
- i2c_set_clientdata(client, NULL);
client->driver = NULL;
kfree(mt9m111);
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index 78b4e09..a9a28b2 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -798,7 +798,7 @@
#endif
};
-static int mt9t031_enum_fmt(struct v4l2_subdev *sd, int index,
+static int mt9t031_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
enum v4l2_mbus_pixelcode *code)
{
if (index)
@@ -883,7 +883,6 @@
if (ret) {
if (icd)
icd->ops = NULL;
- i2c_set_clientdata(client, NULL);
kfree(mt9t031);
}
@@ -897,7 +896,6 @@
if (icd)
icd->ops = NULL;
- i2c_set_clientdata(client, NULL);
client->driver = NULL;
kfree(mt9t031);
diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
index 7438f8d..e4bf1db 100644
--- a/drivers/media/video/mt9t112.c
+++ b/drivers/media/video/mt9t112.c
@@ -1017,10 +1017,10 @@
return 0;
}
-static int mt9t112_enum_fmt(struct v4l2_subdev *sd, int index,
+static int mt9t112_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
enum v4l2_mbus_pixelcode *code)
{
- if ((unsigned int)index >= ARRAY_SIZE(mt9t112_cfmts))
+ if (index >= ARRAY_SIZE(mt9t112_cfmts))
return -EINVAL;
*code = mt9t112_cfmts[index].code;
@@ -1119,7 +1119,6 @@
ret = mt9t112_camera_probe(icd, client);
if (ret) {
icd->ops = NULL;
- i2c_set_clientdata(client, NULL);
kfree(priv);
}
@@ -1132,7 +1131,6 @@
struct soc_camera_device *icd = client->dev.platform_data;
icd->ops = NULL;
- i2c_set_clientdata(client, NULL);
kfree(priv);
return 0;
}
diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c
index 72e55be..f5e778d 100644
--- a/drivers/media/video/mt9v011.c
+++ b/drivers/media/video/mt9v011.c
@@ -392,27 +392,25 @@
return 0;
}
-static int mt9v011_enum_fmt(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt)
+static int mt9v011_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
+ enum v4l2_mbus_pixelcode *code)
{
- if (fmt->index > 0)
+ if (index > 0)
return -EINVAL;
- fmt->flags = 0;
- strcpy(fmt->description, "8 bpp Bayer GRGR..BGBG");
- fmt->pixelformat = V4L2_PIX_FMT_SGRBG8;
-
+ *code = V4L2_MBUS_FMT_SGRBG8_1X8;
return 0;
}
-static int mt9v011_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+static int mt9v011_try_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
{
- struct v4l2_pix_format *pix = &fmt->fmt.pix;
-
- if (pix->pixelformat != V4L2_PIX_FMT_SGRBG8)
+ if (fmt->code != V4L2_MBUS_FMT_SGRBG8_1X8)
return -EINVAL;
- v4l_bound_align_image(&pix->width, 48, 639, 1,
- &pix->height, 32, 480, 1, 0);
+ v4l_bound_align_image(&fmt->width, 48, 639, 1,
+ &fmt->height, 32, 480, 1, 0);
+ fmt->field = V4L2_FIELD_NONE;
+ fmt->colorspace = V4L2_COLORSPACE_SRGB;
return 0;
}
@@ -455,18 +453,17 @@
return 0;
}
-static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+static int mt9v011_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
{
- struct v4l2_pix_format *pix = &fmt->fmt.pix;
struct mt9v011 *core = to_mt9v011(sd);
int rc;
- rc = mt9v011_try_fmt(sd, fmt);
+ rc = mt9v011_try_mbus_fmt(sd, fmt);
if (rc < 0)
return -EINVAL;
- core->width = pix->width;
- core->height = pix->height;
+ core->width = fmt->width;
+ core->height = fmt->height;
set_res(sd);
@@ -549,9 +546,9 @@
};
static const struct v4l2_subdev_video_ops mt9v011_video_ops = {
- .enum_fmt = mt9v011_enum_fmt,
- .try_fmt = mt9v011_try_fmt,
- .s_fmt = mt9v011_s_fmt,
+ .enum_mbus_fmt = mt9v011_enum_mbus_fmt,
+ .try_mbus_fmt = mt9v011_try_mbus_fmt,
+ .s_mbus_fmt = mt9v011_s_mbus_fmt,
.g_parm = mt9v011_g_parm,
.s_parm = mt9v011_s_parm,
};
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index e5bae4c..e7cd23c 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -838,13 +838,13 @@
#endif
};
-static int mt9v022_enum_fmt(struct v4l2_subdev *sd, int index,
+static int mt9v022_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
enum v4l2_mbus_pixelcode *code)
{
struct i2c_client *client = sd->priv;
struct mt9v022 *mt9v022 = to_mt9v022(client);
- if ((unsigned int)index >= mt9v022->num_fmts)
+ if (index >= mt9v022->num_fmts)
return -EINVAL;
*code = mt9v022->fmts[index].code;
@@ -920,7 +920,6 @@
ret = mt9v022_video_probe(icd, client);
if (ret) {
icd->ops = NULL;
- i2c_set_clientdata(client, NULL);
kfree(mt9v022);
}
@@ -934,7 +933,6 @@
icd->ops = NULL;
mt9v022_video_remove(icd);
- i2c_set_clientdata(client, NULL);
client->driver = NULL;
kfree(mt9v022);
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index d477e30..a9be14c 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -672,7 +672,7 @@
fmt->packing == SOC_MBUS_PACKING_EXTEND16);
}
-static int mx3_camera_get_formats(struct soc_camera_device *icd, int idx,
+static int mx3_camera_get_formats(struct soc_camera_device *icd, unsigned int idx,
struct soc_camera_format_xlate *xlate)
{
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
@@ -689,7 +689,7 @@
fmt = soc_mbus_get_fmtdesc(code);
if (!fmt) {
dev_err(icd->dev.parent,
- "Invalid format code #%d: %d\n", idx, code);
+ "Invalid format code #%u: %d\n", idx, code);
return 0;
}
diff --git a/drivers/media/video/omap/Kconfig b/drivers/media/video/omap/Kconfig
index 97c53949..e63233fd 100644
--- a/drivers/media/video/omap/Kconfig
+++ b/drivers/media/video/omap/Kconfig
@@ -1,8 +1,8 @@
config VIDEO_OMAP2_VOUT
tristate "OMAP2/OMAP3 V4L2-Display driver"
- depends on ARCH_OMAP24XX || ARCH_OMAP34XX
+ depends on ARCH_OMAP2 || ARCH_OMAP3
select VIDEOBUF_GEN
- select VIDEOBUF_DMA_SG
+ select VIDEOBUF_DMA_CONTIG
select OMAP2_DSS
select OMAP2_VRAM
select OMAP2_VRFB
diff --git a/drivers/media/video/omap/Makefile b/drivers/media/video/omap/Makefile
index b8bab00..b287880 100644
--- a/drivers/media/video/omap/Makefile
+++ b/drivers/media/video/omap/Makefile
@@ -3,5 +3,5 @@
#
# OMAP2/3 Display driver
-omap-vout-mod-objs := omap_vout.o omap_voutlib.o
-obj-$(CONFIG_VIDEO_OMAP2_VOUT) += omap-vout-mod.o
+omap-vout-y := omap_vout.o omap_voutlib.o
+obj-$(CONFIG_VIDEO_OMAP2_VOUT) += omap-vout.o
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index 4c0ab49..929073e 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -38,8 +38,9 @@
#include <linux/dma-mapping.h>
#include <linux/irq.h>
#include <linux/videodev2.h>
+#include <linux/slab.h>
-#include <media/videobuf-dma-sg.h>
+#include <media/videobuf-dma-contig.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
@@ -1053,9 +1054,9 @@
struct videobuf_buffer *vb,
enum v4l2_field field)
{
+ dma_addr_t dmabuf;
struct vid_vrfb_dma *tx;
enum dss_rotation rotation;
- struct videobuf_dmabuf *dmabuf = NULL;
struct omap_vout_device *vout = q->priv_data;
u32 dest_frame_index = 0, src_element_index = 0;
u32 dest_element_index = 0, src_frame_index = 0;
@@ -1074,24 +1075,17 @@
if (V4L2_MEMORY_USERPTR == vb->memory) {
if (0 == vb->baddr)
return -EINVAL;
- /* Virtual address */
- /* priv points to struct videobuf_pci_sg_memory. But we went
- * pointer to videobuf_dmabuf, which is member of
- * videobuf_pci_sg_memory */
- dmabuf = videobuf_to_dma(q->bufs[vb->i]);
- dmabuf->vmalloc = (void *) vb->baddr;
-
/* Physical address */
- dmabuf->bus_addr =
- (dma_addr_t) omap_vout_uservirt_to_phys(vb->baddr);
+ vout->queued_buf_addr[vb->i] = (u8 *)
+ omap_vout_uservirt_to_phys(vb->baddr);
+ } else {
+ vout->queued_buf_addr[vb->i] = (u8 *)vout->buf_phy_addr[vb->i];
}
- if (!rotation_enabled(vout)) {
- dmabuf = videobuf_to_dma(q->bufs[vb->i]);
- vout->queued_buf_addr[vb->i] = (u8 *) dmabuf->bus_addr;
+ if (!rotation_enabled(vout))
return 0;
- }
- dmabuf = videobuf_to_dma(q->bufs[vb->i]);
+
+ dmabuf = vout->buf_phy_addr[vb->i];
/* If rotation is enabled, copy input buffer into VRFB
* memory space using DMA. We are copying input buffer
* into VRFB memory space of desired angle and DSS will
@@ -1120,7 +1114,7 @@
tx->dev_id, 0x0);
/* src_port required only for OMAP1 */
omap_set_dma_src_params(tx->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
- dmabuf->bus_addr, src_element_index, src_frame_index);
+ dmabuf, src_element_index, src_frame_index);
/*set dma source burst mode for VRFB */
omap_set_dma_src_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
rotation = calc_rotation(vout);
@@ -1211,7 +1205,6 @@
void *pos;
unsigned long start = vma->vm_start;
unsigned long size = (vma->vm_end - vma->vm_start);
- struct videobuf_dmabuf *dmabuf = NULL;
struct omap_vout_device *vout = file->private_data;
struct videobuf_queue *q = &vout->vbq;
@@ -1241,8 +1234,7 @@
vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
vma->vm_ops = &omap_vout_vm_ops;
vma->vm_private_data = (void *) vout;
- dmabuf = videobuf_to_dma(q->bufs[i]);
- pos = dmabuf->vmalloc;
+ pos = (void *)vout->buf_virt_addr[i];
vma->vm_pgoff = virt_to_phys((void *)pos) >> PAGE_SHIFT;
while (size > 0) {
unsigned long pfn;
@@ -1347,8 +1339,8 @@
video_vbq_ops.buf_queue = omap_vout_buffer_queue;
spin_lock_init(&vout->vbq_lock);
- videobuf_queue_sg_init(q, &video_vbq_ops, NULL, &vout->vbq_lock,
- vout->type, V4L2_FIELD_NONE,
+ videobuf_queue_dma_contig_init(q, &video_vbq_ops, q->dev,
+ &vout->vbq_lock, vout->type, V4L2_FIELD_NONE,
sizeof(struct videobuf_buffer), vout);
v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "Exiting %s\n", __func__);
@@ -1799,7 +1791,6 @@
unsigned int i, num_buffers = 0;
struct omap_vout_device *vout = fh;
struct videobuf_queue *q = &vout->vbq;
- struct videobuf_dmabuf *dmabuf = NULL;
if ((req->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) || (req->count < 0))
return -EINVAL;
@@ -1825,8 +1816,7 @@
num_buffers = (vout->vid == OMAP_VIDEO1) ?
video1_numbuffers : video2_numbuffers;
for (i = num_buffers; i < vout->buffer_allocated; i++) {
- dmabuf = videobuf_to_dma(q->bufs[i]);
- omap_vout_free_buffer((u32)dmabuf->vmalloc,
+ omap_vout_free_buffer(vout->buf_virt_addr[i],
vout->buffer_size);
vout->buf_virt_addr[i] = 0;
vout->buf_phy_addr[i] = 0;
@@ -1855,12 +1845,7 @@
goto reqbuf_err;
vout->buffer_allocated = req->count;
- for (i = 0; i < req->count; i++) {
- dmabuf = videobuf_to_dma(q->bufs[i]);
- dmabuf->vmalloc = (void *) vout->buf_virt_addr[i];
- dmabuf->bus_addr = (dma_addr_t) vout->buf_phy_addr[i];
- dmabuf->sglen = 1;
- }
+
reqbuf_err:
mutex_unlock(&vout->lock);
return ret;
@@ -2371,12 +2356,11 @@
for (k = 0; k < pdev->num_resources; k++) {
- vout = kmalloc(sizeof(struct omap_vout_device), GFP_KERNEL);
+ vout = kzalloc(sizeof(struct omap_vout_device), GFP_KERNEL);
if (!vout) {
dev_err(&pdev->dev, ": could not allocate memory\n");
return -ENOMEM;
}
- memset(vout, 0, sizeof(struct omap_vout_device));
vout->vid = k;
vid_dev->vouts[k] = vout;
@@ -2489,7 +2473,7 @@
for (k = 0; k < vid_dev->num_displays; k++) {
if (vid_dev->displays[k]->state != OMAP_DSS_DISPLAY_DISABLED)
- vid_dev->displays[k]->disable(vid_dev->displays[k]);
+ vid_dev->displays[k]->driver->disable(vid_dev->displays[k]);
omap_dss_put_device(vid_dev->displays[k]);
}
@@ -2546,7 +2530,9 @@
def_display = NULL;
}
if (def_display) {
- ret = def_display->enable(def_display);
+ struct omap_dss_driver *dssdrv = def_display->driver;
+
+ ret = dssdrv->enable(def_display);
if (ret) {
/* Here we are not considering a error
* as display may be enabled by frame
@@ -2560,21 +2546,21 @@
if (def_display->caps &
OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
#ifdef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE
- if (def_display->enable_te)
- def_display->enable_te(def_display, 1);
- if (def_display->set_update_mode)
- def_display->set_update_mode(def_display,
+ if (dssdrv->enable_te)
+ dssdrv->enable_te(def_display, 1);
+ if (dssdrv->set_update_mode)
+ dssdrv->set_update_mode(def_display,
OMAP_DSS_UPDATE_AUTO);
#else /* MANUAL_UPDATE */
- if (def_display->enable_te)
- def_display->enable_te(def_display, 0);
- if (def_display->set_update_mode)
- def_display->set_update_mode(def_display,
+ if (dssdrv->enable_te)
+ dssdrv->enable_te(def_display, 0);
+ if (dssdrv->set_update_mode)
+ dssdrv->set_update_mode(def_display,
OMAP_DSS_UPDATE_MANUAL);
#endif
} else {
- if (def_display->set_update_mode)
- def_display->set_update_mode(def_display,
+ if (dssdrv->set_update_mode)
+ dssdrv->set_update_mode(def_display,
OMAP_DSS_UPDATE_AUTO);
}
}
@@ -2593,8 +2579,8 @@
for (i = 0; i < vid_dev->num_displays; i++) {
struct omap_dss_device *display = vid_dev->displays[i];
- if (display->update)
- display->update(display, 0, 0,
+ if (display->driver->update)
+ display->driver->update(display, 0, 0,
display->panel.timings.x_res,
display->panel.timings.y_res);
}
@@ -2609,8 +2595,8 @@
if (ovl->manager && ovl->manager->device)
def_display = ovl->manager->device;
- if (def_display)
- def_display->disable(def_display);
+ if (def_display && def_display->driver)
+ def_display->driver->disable(def_display);
}
probe_err0:
kfree(vid_dev);
diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index 7f8ece3..34034a7 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -1092,10 +1092,10 @@
#endif
};
-static int ov772x_enum_fmt(struct v4l2_subdev *sd, int index,
+static int ov772x_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
enum v4l2_mbus_pixelcode *code)
{
- if ((unsigned int)index >= ARRAY_SIZE(ov772x_cfmts))
+ if (index >= ARRAY_SIZE(ov772x_cfmts))
return -EINVAL;
*code = ov772x_cfmts[index].code;
@@ -1159,7 +1159,6 @@
ret = ov772x_video_probe(icd, client);
if (ret) {
icd->ops = NULL;
- i2c_set_clientdata(client, NULL);
kfree(priv);
}
@@ -1172,7 +1171,6 @@
struct soc_camera_device *icd = client->dev.platform_data;
icd->ops = NULL;
- i2c_set_clientdata(client, NULL);
kfree(priv);
return 0;
}
diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c
index 36599a6..7ce9e05 100644
--- a/drivers/media/video/ov9640.c
+++ b/drivers/media/video/ov9640.c
@@ -614,10 +614,10 @@
return 0;
}
-static int ov9640_enum_fmt(struct v4l2_subdev *sd, int index,
+static int ov9640_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
enum v4l2_mbus_pixelcode *code)
{
- if ((unsigned int)index >= ARRAY_SIZE(ov9640_codes))
+ if (index >= ARRAY_SIZE(ov9640_codes))
return -EINVAL;
*code = ov9640_codes[index];
@@ -783,7 +783,6 @@
if (ret) {
icd->ops = NULL;
- i2c_set_clientdata(client, NULL);
kfree(priv);
}
@@ -794,7 +793,6 @@
{
struct ov9640_priv *priv = i2c_get_clientdata(client);
- i2c_set_clientdata(client, NULL);
kfree(priv);
return 0;
}
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
index 6bc16c1..3092abf 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
@@ -117,6 +117,7 @@
static const struct pvr2_device_client_desc pvr2_cli_gotview_2[] = {
{ .module_id = PVR2_CLIENT_ID_CX25840 },
{ .module_id = PVR2_CLIENT_ID_TUNER },
+ { .module_id = PVR2_CLIENT_ID_DEMOD },
};
static const struct pvr2_device_desc pvr2_device_gotview_2 = {
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/drivers/media/video/pvrusb2/pvrusb2-devattr.h
index e5b9594..273c8d4 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.h
@@ -177,6 +177,11 @@
unsigned int flag_has_composite:1; /* Has composite input */
unsigned int flag_has_svideo:1; /* Has s-video input */
unsigned int flag_fx2_16kb:1; /* 16KB FX2 firmware OK here */
+
+ /* If this driver is considered experimental, i.e. not all aspects
+ are working correctly and/or it is untested, mark that fact
+ with this flag. */
+ unsigned int flag_is_experimental:1;
};
extern struct usb_device_id pvr2_device_table[];
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index 301ef19..70ea578 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -2459,6 +2459,19 @@
hdw,hdw_desc->description);
pvr2_trace(PVR2_TRACE_INFO, "Hardware description: %s",
hdw_desc->description);
+ if (hdw_desc->flag_is_experimental) {
+ pvr2_trace(PVR2_TRACE_INFO, "**********");
+ pvr2_trace(PVR2_TRACE_INFO,
+ "WARNING: Support for this device (%s) is"
+ " experimental.", hdw_desc->description);
+ pvr2_trace(PVR2_TRACE_INFO,
+ "Important functionality might not be"
+ " entirely working.");
+ pvr2_trace(PVR2_TRACE_INFO,
+ "Please consider contacting the driver author to"
+ " help with further stabilization of the driver.");
+ pvr2_trace(PVR2_TRACE_INFO, "**********");
+ }
if (!hdw) goto fail;
init_timer(&hdw->quiescent_timer);
@@ -3056,14 +3069,14 @@
}
if (hdw->res_hor_dirty || hdw->res_ver_dirty || hdw->force_dirty) {
- struct v4l2_format fmt;
+ struct v4l2_mbus_framefmt fmt;
memset(&fmt, 0, sizeof(fmt));
- fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- fmt.fmt.pix.width = hdw->res_hor_val;
- fmt.fmt.pix.height = hdw->res_ver_val;
+ fmt.width = hdw->res_hor_val;
+ fmt.height = hdw->res_ver_val;
+ fmt.code = V4L2_MBUS_FMT_FIXED;
pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_size(%dx%d)",
- fmt.fmt.pix.width, fmt.fmt.pix.height);
- v4l2_device_call_all(&hdw->v4l2_dev, 0, video, s_fmt, &fmt);
+ fmt.width, fmt.height);
+ v4l2_device_call_all(&hdw->v4l2_dev, 0, video, s_mbus_fmt, &fmt);
}
if (hdw->srate_dirty || hdw->force_dirty) {
@@ -4084,12 +4097,20 @@
void pvr2_hdw_cpureset_assert(struct pvr2_hdw *hdw,int val)
{
- char da[1];
+ char *da;
unsigned int pipe;
int ret;
if (!hdw->usb_dev) return;
+ da = kmalloc(16, GFP_KERNEL);
+
+ if (da == NULL) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Unable to allocate memory to control CPU reset");
+ return;
+ }
+
pvr2_trace(PVR2_TRACE_INIT,"cpureset_assert(%d)",val);
da[0] = val ? 0x01 : 0x00;
@@ -4103,6 +4124,8 @@
"cpureset_assert(%d) error=%d",val,ret);
pvr2_hdw_render_useless(hdw);
}
+
+ kfree(da);
}
diff --git a/drivers/media/video/pvrusb2/pvrusb2-main.c b/drivers/media/video/pvrusb2/pvrusb2-main.c
index eeacd0f..2254194 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-main.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-main.c
@@ -153,12 +153,12 @@
usb_deregister(&pvr_driver);
+ pvr2_context_global_done();
+
#ifdef CONFIG_VIDEO_PVRUSB2_SYSFS
pvr2_sysfs_class_destroy(class_ptr);
#endif /* CONFIG_VIDEO_PVRUSB2_SYSFS */
- pvr2_context_global_done();
-
pvr2_trace(PVR2_TRACE_INIT,"pvr_exit complete");
}
diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
index 71f5056..3d7e5aa 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
@@ -74,7 +74,7 @@
int ctl_id;
struct pvr2_sysfs *chptr;
struct pvr2_sysfs_ctl_item *item_next;
- struct attribute *attr_gen[7];
+ struct attribute *attr_gen[8];
struct attribute_group grp;
int created_ok;
char name[80];
@@ -511,6 +511,7 @@
static void class_dev_destroy(struct pvr2_sysfs *sfp)
{
+ struct device *dev;
if (!sfp->class_dev) return;
#ifdef CONFIG_VIDEO_PVRUSB2_DEBUGIFC
pvr2_sysfs_tear_down_debugifc(sfp);
@@ -542,6 +543,9 @@
}
pvr2_sysfs_trace("Destroying class_dev id=%p",sfp->class_dev);
dev_set_drvdata(sfp->class_dev, NULL);
+ dev = sfp->class_dev->parent;
+ sfp->class_dev->parent = NULL;
+ put_device(dev);
device_unregister(sfp->class_dev);
sfp->class_dev = NULL;
}
@@ -631,10 +635,11 @@
pvr2_sysfs_trace("Creating class_dev id=%p",class_dev);
class_dev->class = &class_ptr->class;
+
dev_set_name(class_dev, "%s",
pvr2_hdw_get_device_identifier(sfp->channel.hdw));
- class_dev->parent = &usb_dev->dev;
+ class_dev->parent = get_device(&usb_dev->dev);
sfp->class_dev = class_dev;
dev_set_drvdata(class_dev, sfp);
@@ -775,7 +780,8 @@
struct pvr2_sysfs_class *clp;
clp = kzalloc(sizeof(*clp),GFP_KERNEL);
if (!clp) return clp;
- pvr2_sysfs_trace("Creating pvr2_sysfs_class id=%p",clp);
+ pvr2_sysfs_trace("Creating and registering pvr2_sysfs_class id=%p",
+ clp);
clp->class.name = "pvrusb2";
clp->class.class_release = pvr2_sysfs_class_release;
clp->class.dev_release = pvr2_sysfs_release;
@@ -791,6 +797,7 @@
void pvr2_sysfs_class_destroy(struct pvr2_sysfs_class *clp)
{
+ pvr2_sysfs_trace("Unregistering pvr2_sysfs_class id=%p", clp);
class_unregister(&clp->class);
}
diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
index 5ffa0d2..aaafa03 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
@@ -883,6 +883,17 @@
{
struct pvr2_hdw *hdw = dip->v4lp->channel.mc_head->hdw;
enum pvr2_config cfg = dip->config;
+ char msg[80];
+ unsigned int mcnt;
+
+ /* Construct the unregistration message *before* we actually
+ perform the unregistration step. By doing it this way we don't
+ have to worry about potentially touching deleted resources. */
+ mcnt = scnprintf(msg, sizeof(msg) - 1,
+ "pvrusb2: unregistered device %s [%s]",
+ video_device_node_name(&dip->devbase),
+ pvr2_config_get_name(cfg));
+ msg[mcnt] = 0;
pvr2_hdw_v4l_store_minor_number(hdw,dip->minor_type,-1);
@@ -894,9 +905,7 @@
are gone. */
video_unregister_device(&dip->devbase);
- printk(KERN_INFO "pvrusb2: unregistered device %s [%s]\n",
- video_device_node_name(&dip->devbase),
- pvr2_config_get_name(cfg));
+ printk(KERN_INFO "%s\n", msg);
}
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 7fe70e7..fb242f6 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -1247,7 +1247,7 @@
fmt->packing == SOC_MBUS_PACKING_EXTEND16);
}
-static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
+static int pxa_camera_get_formats(struct soc_camera_device *icd, unsigned int idx,
struct soc_camera_format_xlate *xlate)
{
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
@@ -1264,7 +1264,7 @@
fmt = soc_mbus_get_fmtdesc(code);
if (!fmt) {
- dev_err(dev, "Invalid format code #%d: %d\n", idx, code);
+ dev_err(dev, "Invalid format code #%u: %d\n", idx, code);
return 0;
}
diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/video/rj54n1cb0c.c
index bbd9c11..47fd207 100644
--- a/drivers/media/video/rj54n1cb0c.c
+++ b/drivers/media/video/rj54n1cb0c.c
@@ -481,10 +481,10 @@
return 0;
}
-static int rj54n1_enum_fmt(struct v4l2_subdev *sd, int index,
+static int rj54n1_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
enum v4l2_mbus_pixelcode *code)
{
- if ((unsigned int)index >= ARRAY_SIZE(rj54n1_colour_fmts))
+ if (index >= ARRAY_SIZE(rj54n1_colour_fmts))
return -EINVAL;
*code = rj54n1_colour_fmts[index].code;
@@ -1444,7 +1444,6 @@
ret = rj54n1_video_probe(icd, client, rj54n1_priv);
if (ret < 0) {
icd->ops = NULL;
- i2c_set_clientdata(client, NULL);
kfree(rj54n1);
return ret;
}
@@ -1461,7 +1460,6 @@
icd->ops = NULL;
if (icl->free_bus)
icl->free_bus(icl);
- i2c_set_clientdata(client, NULL);
client->driver = NULL;
kfree(rj54n1);
diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
index 53b6fcd..76da743 100644
--- a/drivers/media/video/saa7115.c
+++ b/drivers/media/video/saa7115.c
@@ -1117,13 +1117,6 @@
return 0;
}
-static int saa711x_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
- if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
- return -EINVAL;
- return saa711x_g_sliced_fmt(sd, &fmt->fmt.sliced);
-}
-
static int saa711x_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
{
saa711x_set_lcr(sd, NULL);
@@ -1136,12 +1129,13 @@
return 0;
}
-static int saa711x_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+static int saa711x_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
{
- if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ if (fmt->code != V4L2_MBUS_FMT_FIXED)
return -EINVAL;
-
- return saa711x_set_size(sd, fmt->fmt.pix.width, fmt->fmt.pix.height);
+ fmt->field = V4L2_FIELD_INTERLACED;
+ fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
+ return saa711x_set_size(sd, fmt->width, fmt->height);
}
/* Decode the sliced VBI data stream as created by the saa7115.
@@ -1556,8 +1550,7 @@
static const struct v4l2_subdev_video_ops saa711x_video_ops = {
.s_routing = saa711x_s_routing,
.s_crystal_freq = saa711x_s_crystal_freq,
- .g_fmt = saa711x_g_fmt,
- .s_fmt = saa711x_s_fmt,
+ .s_mbus_fmt = saa711x_s_mbus_fmt,
.s_stream = saa711x_s_stream,
.querystd = saa711x_querystd,
.g_input_status = saa711x_g_input_status,
diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c
index 87986ad..79fffcf 100644
--- a/drivers/media/video/saa7127.c
+++ b/drivers/media/video/saa7127.c
@@ -645,13 +645,6 @@
return 0;
}
-static int saa7127_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
- if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
- return -EINVAL;
- return saa7127_g_sliced_fmt(sd, &fmt->fmt.sliced);
-}
-
static int saa7127_s_vbi_data(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
{
switch (data->id) {
@@ -731,7 +724,6 @@
};
static const struct v4l2_subdev_video_ops saa7127_video_ops = {
- .g_fmt = saa7127_g_fmt,
.s_std_output = saa7127_s_std_output,
.s_routing = saa7127_s_routing,
.s_stream = saa7127_s_stream,
diff --git a/drivers/media/video/saa7134/saa6752hs.c b/drivers/media/video/saa7134/saa6752hs.c
index 1eabff6..40fd31c 100644
--- a/drivers/media/video/saa7134/saa6752hs.c
+++ b/drivers/media/video/saa7134/saa6752hs.c
@@ -846,24 +846,28 @@
return 0;
}
-static int saa6752hs_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+static int saa6752hs_g_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f)
{
struct saa6752hs_state *h = to_state(sd);
if (h->video_format == SAA6752HS_VF_UNKNOWN)
h->video_format = SAA6752HS_VF_D1;
- f->fmt.pix.width =
- v4l2_format_table[h->video_format].fmt.pix.width;
- f->fmt.pix.height =
- v4l2_format_table[h->video_format].fmt.pix.height;
+ f->width = v4l2_format_table[h->video_format].fmt.pix.width;
+ f->height = v4l2_format_table[h->video_format].fmt.pix.height;
+ f->code = V4L2_MBUS_FMT_FIXED;
+ f->field = V4L2_FIELD_INTERLACED;
+ f->colorspace = V4L2_COLORSPACE_SMPTE170M;
return 0;
}
-static int saa6752hs_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+static int saa6752hs_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f)
{
struct saa6752hs_state *h = to_state(sd);
int dist_352, dist_480, dist_720;
+ if (f->code != V4L2_MBUS_FMT_FIXED)
+ return -EINVAL;
+
/*
FIXME: translate and round width/height into EMPRESS
subsample type:
@@ -876,28 +880,30 @@
D1 | 720x576 | 720x480
*/
- dist_352 = abs(f->fmt.pix.width - 352);
- dist_480 = abs(f->fmt.pix.width - 480);
- dist_720 = abs(f->fmt.pix.width - 720);
+ dist_352 = abs(f->width - 352);
+ dist_480 = abs(f->width - 480);
+ dist_720 = abs(f->width - 720);
if (dist_720 < dist_480) {
- f->fmt.pix.width = 720;
- f->fmt.pix.height = 576;
+ f->width = 720;
+ f->height = 576;
h->video_format = SAA6752HS_VF_D1;
} else if (dist_480 < dist_352) {
- f->fmt.pix.width = 480;
- f->fmt.pix.height = 576;
+ f->width = 480;
+ f->height = 576;
h->video_format = SAA6752HS_VF_2_3_D1;
} else {
- f->fmt.pix.width = 352;
- if (abs(f->fmt.pix.height - 576) <
- abs(f->fmt.pix.height - 288)) {
- f->fmt.pix.height = 576;
+ f->width = 352;
+ if (abs(f->height - 576) <
+ abs(f->height - 288)) {
+ f->height = 576;
h->video_format = SAA6752HS_VF_1_2_D1;
} else {
- f->fmt.pix.height = 288;
+ f->height = 288;
h->video_format = SAA6752HS_VF_SIF;
}
}
+ f->field = V4L2_FIELD_INTERLACED;
+ f->colorspace = V4L2_COLORSPACE_SMPTE170M;
return 0;
}
@@ -932,8 +938,8 @@
};
static const struct v4l2_subdev_video_ops saa6752hs_video_ops = {
- .s_fmt = saa6752hs_s_fmt,
- .g_fmt = saa6752hs_g_fmt,
+ .s_mbus_fmt = saa6752hs_s_mbus_fmt,
+ .g_mbus_fmt = saa6752hs_g_mbus_fmt,
};
static const struct v4l2_subdev_ops saa6752hs_ops = {
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 72700d4..07f6bb8 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -3897,6 +3897,40 @@
.gpio = 0x01,
},
},
+ [SAA7134_BOARD_AVERMEDIA_M733A] = {
+ .name = "Avermedia PCI M733A",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .tuner_config = 0,
+ .gpiomask = 0x020200000,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ }, {
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE1,
+ }, {
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE1,
+ } },
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x00200000,
+ },
+ .mute = {
+ .name = name_mute,
+ .amux = TV,
+ .gpio = 0x01,
+ },
+ },
[SAA7134_BOARD_BEHOLD_401] = {
/* Beholder Intl. Ltd. 2008 */
/*Dmitry Belimov <d.belimov@gmail.com> */
@@ -5822,6 +5856,18 @@
.driver_data = SAA7134_BOARD_AVERMEDIA_M135A,
}, {
.vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x1461, /* Avermedia Technologies Inc */
+ .subdevice = 0x4155,
+ .driver_data = SAA7134_BOARD_AVERMEDIA_M733A,
+ }, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x1461, /* Avermedia Technologies Inc */
+ .subdevice = 0x4255,
+ .driver_data = SAA7134_BOARD_AVERMEDIA_M733A,
+ }, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7130,
.subvendor = PCI_VENDOR_ID_PHILIPS,
.subdevice = 0x2004,
@@ -6786,6 +6832,7 @@
switch (dev->board) {
case SAA7134_BOARD_HAUPPAUGE_HVR1150:
case SAA7134_BOARD_HAUPPAUGE_HVR1120:
+ case SAA7134_BOARD_AVERMEDIA_M733A:
/* tda8290 + tda18271 */
ret = saa7134_tda8290_18271_callback(dev, command, arg);
break;
@@ -7087,6 +7134,14 @@
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x0000C000, 0x0000C000);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0000C000, 0x0000C000);
break;
+ case SAA7134_BOARD_AVERMEDIA_M733A:
+ saa7134_set_gpio(dev, 1, 1);
+ msleep(10);
+ saa7134_set_gpio(dev, 1, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 1, 1);
+ dev->has_remote = SAA7134_REMOTE_GPIO;
+ break;
}
return 0;
}
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index ea877a5..e763f9f 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -223,9 +223,11 @@
struct v4l2_format *f)
{
struct saa7134_dev *dev = file->private_data;
+ struct v4l2_mbus_framefmt mbus_fmt;
- saa_call_all(dev, video, g_fmt, f);
+ saa_call_all(dev, video, g_mbus_fmt, &mbus_fmt);
+ v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt);
f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG;
f->fmt.pix.sizeimage = TS_PACKET_SIZE * dev->ts.nr_packets;
@@ -236,8 +238,11 @@
struct v4l2_format *f)
{
struct saa7134_dev *dev = file->private_data;
+ struct v4l2_mbus_framefmt mbus_fmt;
- saa_call_all(dev, video, s_fmt, f);
+ v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, V4L2_MBUS_FMT_FIXED);
+ saa_call_all(dev, video, s_mbus_fmt, &mbus_fmt);
+ v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt);
f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG;
f->fmt.pix.sizeimage = TS_PACKET_SIZE * dev->ts.nr_packets;
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index e5565e2..0b336ca 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -141,8 +141,8 @@
struct saa7134_dev *dev = ir->c->adapter->algo_data;
if (dev == NULL) {
- dprintk("get_key_flydvb_trio: "
- "gir->c->adapter->algo_data is NULL!\n");
+ i2cdprintk("get_key_flydvb_trio: "
+ "ir->c->adapter->algo_data is NULL!\n");
return -EIO;
}
@@ -195,8 +195,8 @@
/* <dev> is needed to access GPIO. Used by the saa_readl macro. */
struct saa7134_dev *dev = ir->c->adapter->algo_data;
if (dev == NULL) {
- dprintk("get_key_msi_tvanywhere_plus: "
- "gir->c->adapter->algo_data is NULL!\n");
+ i2cdprintk("get_key_msi_tvanywhere_plus: "
+ "ir->c->adapter->algo_data is NULL!\n");
return -EIO;
}
@@ -657,12 +657,19 @@
saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4);
break;
case SAA7134_BOARD_AVERMEDIA_M135A:
- ir_codes = RC_MAP_AVERMEDIA_M135A_RM_JX;
+ ir_codes = RC_MAP_AVERMEDIA_M135A;
mask_keydown = 0x0040000; /* Enable GPIO18 line on both edges */
mask_keyup = 0x0040000;
mask_keycode = 0xffff;
raw_decode = 1;
break;
+ case SAA7134_BOARD_AVERMEDIA_M733A:
+ ir_codes = RC_MAP_AVERMEDIA_M733A_RM_K6;
+ mask_keydown = 0x0040000;
+ mask_keyup = 0x0040000;
+ mask_keycode = 0xffff;
+ raw_decode = 1;
+ break;
case SAA7134_BOARD_AVERMEDIA_777:
case SAA7134_BOARD_AVERMEDIA_A16AR:
ir_codes = RC_MAP_AVERMEDIA;
@@ -815,7 +822,6 @@
mask_keyup = 0x020000;
polling = 50; /* ms */
break;
- break;
}
if (NULL == ir_codes) {
printk("%s: Oops: IR config error [card=%d]\n",
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 3962534..756a1ca 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -303,6 +303,7 @@
#define SAA7134_BOARD_HAWELL_HW_404M7 177
#define SAA7134_BOARD_BEHOLD_H7 178
#define SAA7134_BOARD_BEHOLD_A7 179
+#define SAA7134_BOARD_AVERMEDIA_M733A 180
#define SAA7134_MAXBOARDS 32
#define SAA7134_INPUT_MAX 8
diff --git a/drivers/media/video/saa717x.c b/drivers/media/video/saa717x.c
index d521c64..78d6995 100644
--- a/drivers/media/video/saa717x.c
+++ b/drivers/media/video/saa717x.c
@@ -1199,28 +1199,32 @@
}
#endif
-static int saa717x_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+static int saa717x_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
{
- struct v4l2_pix_format *pix;
int prescale, h_scale, v_scale;
- pix = &fmt->fmt.pix;
v4l2_dbg(1, debug, sd, "decoder set size\n");
+ if (fmt->code != V4L2_MBUS_FMT_FIXED)
+ return -EINVAL;
+
/* FIXME need better bounds checking here */
- if (pix->width < 1 || pix->width > 1440)
+ if (fmt->width < 1 || fmt->width > 1440)
return -EINVAL;
- if (pix->height < 1 || pix->height > 960)
+ if (fmt->height < 1 || fmt->height > 960)
return -EINVAL;
+ fmt->field = V4L2_FIELD_INTERLACED;
+ fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
+
/* scaling setting */
/* NTSC and interlace only */
- prescale = SAA717X_NTSC_WIDTH / pix->width;
+ prescale = SAA717X_NTSC_WIDTH / fmt->width;
if (prescale == 0)
prescale = 1;
- h_scale = 1024 * SAA717X_NTSC_WIDTH / prescale / pix->width;
+ h_scale = 1024 * SAA717X_NTSC_WIDTH / prescale / fmt->width;
/* interlace */
- v_scale = 512 * 2 * SAA717X_NTSC_HEIGHT / pix->height;
+ v_scale = 512 * 2 * SAA717X_NTSC_HEIGHT / fmt->height;
/* Horizontal prescaling etc */
set_h_prescale(sd, 0, prescale);
@@ -1241,19 +1245,19 @@
/* set video output size */
/* video number of pixels at output */
/* TASK A */
- saa717x_write(sd, 0x5C, (u8)(pix->width & 0xFF));
- saa717x_write(sd, 0x5D, (u8)((pix->width >> 8) & 0xFF));
+ saa717x_write(sd, 0x5C, (u8)(fmt->width & 0xFF));
+ saa717x_write(sd, 0x5D, (u8)((fmt->width >> 8) & 0xFF));
/* TASK B */
- saa717x_write(sd, 0x9C, (u8)(pix->width & 0xFF));
- saa717x_write(sd, 0x9D, (u8)((pix->width >> 8) & 0xFF));
+ saa717x_write(sd, 0x9C, (u8)(fmt->width & 0xFF));
+ saa717x_write(sd, 0x9D, (u8)((fmt->width >> 8) & 0xFF));
/* video number of lines at output */
/* TASK A */
- saa717x_write(sd, 0x5E, (u8)(pix->height & 0xFF));
- saa717x_write(sd, 0x5F, (u8)((pix->height >> 8) & 0xFF));
+ saa717x_write(sd, 0x5E, (u8)(fmt->height & 0xFF));
+ saa717x_write(sd, 0x5F, (u8)((fmt->height >> 8) & 0xFF));
/* TASK B */
- saa717x_write(sd, 0x9E, (u8)(pix->height & 0xFF));
- saa717x_write(sd, 0x9F, (u8)((pix->height >> 8) & 0xFF));
+ saa717x_write(sd, 0x9E, (u8)(fmt->height & 0xFF));
+ saa717x_write(sd, 0x9F, (u8)((fmt->height >> 8) & 0xFF));
return 0;
}
@@ -1403,7 +1407,7 @@
static const struct v4l2_subdev_video_ops saa717x_video_ops = {
.s_routing = saa717x_s_video_routing,
- .s_fmt = saa717x_s_fmt,
+ .s_mbus_fmt = saa717x_s_mbus_fmt,
.s_stream = saa717x_s_stream,
};
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 4ac3b48..961bfa2 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -878,7 +878,7 @@
static int client_g_rect(struct v4l2_subdev *sd, struct v4l2_rect *rect);
-static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
+static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int idx,
struct soc_camera_format_xlate *xlate)
{
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
@@ -897,7 +897,7 @@
fmt = soc_mbus_get_fmtdesc(code);
if (!fmt) {
dev_err(icd->dev.parent,
- "Invalid format code #%d: %d\n", idx, code);
+ "Invalid format code #%u: %d\n", idx, code);
return -EINVAL;
}
diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h
index 522ba3f..b6643ca 100644
--- a/drivers/media/video/sn9c102/sn9c102_devtable.h
+++ b/drivers/media/video/sn9c102/sn9c102_devtable.h
@@ -62,8 +62,8 @@
#if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE
{ SN9C102_USB_DEVICE(0x0c45, 0x602c, BRIDGE_SN9C102), },
/* { SN9C102_USB_DEVICE(0x0c45, 0x602d, BRIDGE_SN9C102), }, HV7131R */
-#endif
{ SN9C102_USB_DEVICE(0x0c45, 0x602e, BRIDGE_SN9C102), },
+#endif
{ SN9C102_USB_DEVICE(0x0c45, 0x6030, BRIDGE_SN9C102), },
/* SN9C103 */
{ SN9C102_USB_DEVICE(0x0c45, 0x6080, BRIDGE_SN9C103), },
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index db1ca0e..475757b 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -200,7 +200,8 @@
{
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
- int i, fmts = 0, raw_fmts = 0, ret;
+ unsigned int i, fmts = 0, raw_fmts = 0;
+ int ret;
enum v4l2_mbus_pixelcode code;
while (!v4l2_subdev_call(sd, video, enum_mbus_fmt, raw_fmts, &code))
diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c
index 10b003a..248c986 100644
--- a/drivers/media/video/soc_camera_platform.c
+++ b/drivers/media/video/soc_camera_platform.c
@@ -71,7 +71,7 @@
static struct v4l2_subdev_core_ops platform_subdev_core_ops;
-static int soc_camera_platform_enum_fmt(struct v4l2_subdev *sd, int index,
+static int soc_camera_platform_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
enum v4l2_mbus_pixelcode *code)
{
struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd);
diff --git a/drivers/media/video/tcm825x.c b/drivers/media/video/tcm825x.c
index b90e9da..54681a5 100644
--- a/drivers/media/video/tcm825x.c
+++ b/drivers/media/video/tcm825x.c
@@ -850,7 +850,6 @@
const struct i2c_device_id *did)
{
struct tcm825x_sensor *sensor = &tcm825x;
- int rval;
if (i2c_get_clientdata(client))
return -EBUSY;
@@ -871,11 +870,7 @@
sensor->pix.height = tcm825x_sizes[QVGA].height;
sensor->pix.pixelformat = V4L2_PIX_FMT_RGB565;
- rval = v4l2_int_device_register(sensor->v4l2_int_device);
- if (rval)
- i2c_set_clientdata(client, NULL);
-
- return rval;
+ return v4l2_int_device_register(sensor->v4l2_int_device);
}
static int tcm825x_remove(struct i2c_client *client)
@@ -886,7 +881,6 @@
return -ENODEV; /* our client isn't attached */
v4l2_int_device_unregister(sensor->v4l2_int_device);
- i2c_set_clientdata(client, NULL);
return 0;
}
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index 0a87749..07fabdd 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -267,6 +267,21 @@
{ TUNER_ABSENT, "Xceive XC4000"},
{ TUNER_ABSENT, "Dibcom 7070"},
{ TUNER_PHILIPS_TDA8290, "NXP 18271C2"},
+ { TUNER_ABSENT, "unknown"},
+ { TUNER_ABSENT, "unknown"},
+ { TUNER_ABSENT, "unknown"},
+ { TUNER_ABSENT, "unknown"},
+ /* 160-169 */
+ { TUNER_ABSENT, "unknown"},
+ { TUNER_ABSENT, "unknown"},
+ { TUNER_ABSENT, "unknown"},
+ { TUNER_ABSENT, "unknown"},
+ { TUNER_ABSENT, "unknown"},
+ { TUNER_ABSENT, "unknown"},
+ { TUNER_ABSENT, "unknown"},
+ { TUNER_ABSENT, "unknown"},
+ { TUNER_PHILIPS_FQ1236_MK5, "TCL M30WTP-4N-E"},
+ { TUNER_ABSENT, "unknown"},
};
/* Use V4L2_IDENT_AMBIGUOUS for those audio 'chips' that are
diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c
index e826114..71c73fa 100644
--- a/drivers/media/video/tvp514x.c
+++ b/drivers/media/video/tvp514x.c
@@ -88,9 +88,6 @@
* @pdata: Board specific
* @ver: Chip version
* @streaming: TVP5146/47 decoder streaming - enabled or disabled.
- * @pix: Current pixel format
- * @num_fmts: Number of formats
- * @fmt_list: Format list
* @current_std: Current standard
* @num_stds: Number of standards
* @std_list: Standards list
@@ -105,13 +102,9 @@
int ver;
int streaming;
- struct v4l2_pix_format pix;
- int num_fmts;
- const struct v4l2_fmtdesc *fmt_list;
-
enum tvp514x_std current_std;
int num_stds;
- struct tvp514x_std_info *std_list;
+ const struct tvp514x_std_info *std_list;
/* Input and Output Routing parameters */
u32 input;
u32 output;
@@ -203,27 +196,12 @@
};
/**
- * List of image formats supported by TVP5146/47 decoder
- * Currently we are using 8 bit mode only, but can be
- * extended to 10/20 bit mode.
- */
-static const struct v4l2_fmtdesc tvp514x_fmt_list[] = {
- {
- .index = 0,
- .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
- .flags = 0,
- .description = "8-bit UYVY 4:2:2 Format",
- .pixelformat = V4L2_PIX_FMT_UYVY,
- },
-};
-
-/**
* Supported standards -
*
* Currently supports two standards only, need to add support for rest of the
* modes, like SECAM, etc...
*/
-static struct tvp514x_std_info tvp514x_std_list[] = {
+static const struct tvp514x_std_info tvp514x_std_list[] = {
/* Standard: STD_NTSC_MJ */
[STD_NTSC_MJ] = {
.width = NTSC_NUM_ACTIVE_PIXELS,
@@ -366,13 +344,13 @@
}
/**
- * tvp514x_get_current_std() : Get the current standard detected by TVP5146/47
+ * tvp514x_query_current_std() : Query the current standard detected by TVP5146/47
* @sd: ptr to v4l2_subdev struct
*
- * Get current standard detected by TVP5146/47, STD_INVALID if there is no
+ * Returns the current standard detected by TVP5146/47, STD_INVALID if there is no
* standard detected.
*/
-static enum tvp514x_std tvp514x_get_current_std(struct v4l2_subdev *sd)
+static enum tvp514x_std tvp514x_query_current_std(struct v4l2_subdev *sd)
{
u8 std, std_status;
@@ -518,7 +496,7 @@
* @std_id: standard V4L2 std_id ioctl enum
*
* Returns the current standard detected by TVP5146/47. If no active input is
- * detected, returns -EINVAL
+ * detected then *std_id is set to 0 and the function returns 0.
*/
static int tvp514x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id)
{
@@ -530,10 +508,12 @@
if (std_id == NULL)
return -EINVAL;
- /* get the current standard */
- current_std = tvp514x_get_current_std(sd);
+ *std_id = V4L2_STD_UNKNOWN;
+
+ /* query the current standard */
+ current_std = tvp514x_query_current_std(sd);
if (current_std == STD_INVALID)
- return -EINVAL;
+ return 0;
input_sel = decoder->input;
@@ -575,12 +555,11 @@
/* check whether signal is locked */
sync_lock_status = tvp514x_read_reg(sd, REG_STATUS1);
if (lock_mask != (sync_lock_status & lock_mask))
- return -EINVAL; /* No input detected */
+ return 0; /* No input detected */
- decoder->current_std = current_std;
*std_id = decoder->std_list[current_std].standard.id;
- v4l2_dbg(1, debug, sd, "Current STD: %s",
+ v4l2_dbg(1, debug, sd, "Current STD: %s\n",
decoder->std_list[current_std].standard.name);
return 0;
}
@@ -614,7 +593,7 @@
decoder->tvp514x_regs[REG_VIDEO_STD].val =
decoder->std_list[i].video_std;
- v4l2_dbg(1, debug, sd, "Standard set to: %s",
+ v4l2_dbg(1, debug, sd, "Standard set to: %s\n",
decoder->std_list[i].standard.name);
return 0;
}
@@ -637,7 +616,6 @@
int err;
enum tvp514x_input input_sel;
enum tvp514x_output output_sel;
- enum tvp514x_std current_std = STD_INVALID;
u8 sync_lock_status, lock_mask;
int try_count = LOCK_RETRY_COUNT;
@@ -721,11 +699,6 @@
/* Allow decoder to sync up with new input */
msleep(LOCK_RETRY_DELAY);
- /* get the current standard for future reference */
- current_std = tvp514x_get_current_std(sd);
- if (current_std == STD_INVALID)
- continue;
-
sync_lock_status = tvp514x_read_reg(sd,
REG_STATUS1);
if (lock_mask == (sync_lock_status & lock_mask))
@@ -733,15 +706,13 @@
break;
}
- if ((current_std == STD_INVALID) || (try_count < 0))
+ if (try_count < 0)
return -EINVAL;
- decoder->current_std = current_std;
decoder->input = input;
decoder->output = output;
- v4l2_dbg(1, debug, sd, "Input set to: %d, std : %d",
- input_sel, current_std);
+ v4l2_dbg(1, debug, sd, "Input set to: %d\n", input_sel);
return 0;
}
@@ -794,7 +765,7 @@
return err;
}
- v4l2_dbg(1, debug, sd, "Query Control:%s: Min - %d, Max - %d, Def - %d",
+ v4l2_dbg(1, debug, sd, "Query Control:%s: Min - %d, Max - %d, Def - %d\n",
qctrl->name, qctrl->minimum, qctrl->maximum,
qctrl->default_value);
@@ -851,7 +822,7 @@
return -EINVAL;
}
- v4l2_dbg(1, debug, sd, "Get Control: ID - %d - %d",
+ v4l2_dbg(1, debug, sd, "Get Control: ID - %d - %d\n",
ctrl->id, ctrl->value);
return 0;
}
@@ -951,7 +922,7 @@
return err;
}
- v4l2_dbg(1, debug, sd, "Set Control: ID - %d - %d",
+ v4l2_dbg(1, debug, sd, "Set Control: ID - %d - %d\n",
ctrl->id, ctrl->value);
return err;
@@ -967,44 +938,33 @@
static int
tvp514x_enum_fmt_cap(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt)
{
- struct tvp514x_decoder *decoder = to_decoder(sd);
- int index;
-
- if (fmt == NULL)
- return -EINVAL;
-
- index = fmt->index;
- if ((index >= decoder->num_fmts) || (index < 0))
- /* Index out of bound */
+ if (fmt == NULL || fmt->index)
return -EINVAL;
if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
/* only capture is supported */
return -EINVAL;
- memcpy(fmt, &decoder->fmt_list[index],
- sizeof(struct v4l2_fmtdesc));
-
- v4l2_dbg(1, debug, sd, "Current FMT: index - %d (%s)",
- decoder->fmt_list[index].index,
- decoder->fmt_list[index].description);
+ /* only one format */
+ fmt->flags = 0;
+ strlcpy(fmt->description, "8-bit UYVY 4:2:2 Format",
+ sizeof(fmt->description));
+ fmt->pixelformat = V4L2_PIX_FMT_UYVY;
return 0;
}
/**
- * tvp514x_try_fmt_cap() - V4L2 decoder interface handler for try_fmt
+ * tvp514x_fmt_cap() - V4L2 decoder interface handler for try/s/g_fmt
* @sd: pointer to standard V4L2 sub-device structure
* @f: pointer to standard V4L2 VIDIOC_TRY_FMT ioctl structure
*
- * Implement the VIDIOC_TRY_FMT ioctl for the CAPTURE buffer type. This
- * ioctl is used to negotiate the image capture size and pixel format
- * without actually making it take effect.
+ * Implement the VIDIOC_TRY/S/G_FMT ioctl for the CAPTURE buffer type. This
+ * ioctl is used to negotiate the image capture size and pixel format.
*/
static int
-tvp514x_try_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
+tvp514x_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
{
struct tvp514x_decoder *decoder = to_decoder(sd);
- int ifmt;
struct v4l2_pix_format *pix;
enum tvp514x_std current_std;
@@ -1012,106 +972,30 @@
return -EINVAL;
if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- /* only capture is supported */
- f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ return -EINVAL;
pix = &f->fmt.pix;
/* Calculate height and width based on current standard */
- current_std = tvp514x_get_current_std(sd);
- if (current_std == STD_INVALID)
- return -EINVAL;
+ current_std = decoder->current_std;
- decoder->current_std = current_std;
+ pix->pixelformat = V4L2_PIX_FMT_UYVY;
pix->width = decoder->std_list[current_std].width;
pix->height = decoder->std_list[current_std].height;
-
- for (ifmt = 0; ifmt < decoder->num_fmts; ifmt++) {
- if (pix->pixelformat ==
- decoder->fmt_list[ifmt].pixelformat)
- break;
- }
- if (ifmt == decoder->num_fmts)
- /* None of the format matched, select default */
- ifmt = 0;
- pix->pixelformat = decoder->fmt_list[ifmt].pixelformat;
-
pix->field = V4L2_FIELD_INTERLACED;
pix->bytesperline = pix->width * 2;
pix->sizeimage = pix->bytesperline * pix->height;
pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
pix->priv = 0;
- v4l2_dbg(1, debug, sd, "Try FMT: pixelformat - %s, bytesperline - %d"
- "Width - %d, Height - %d",
- decoder->fmt_list[ifmt].description, pix->bytesperline,
+ v4l2_dbg(1, debug, sd, "FMT: bytesperline - %d"
+ "Width - %d, Height - %d\n",
+ pix->bytesperline,
pix->width, pix->height);
return 0;
}
/**
- * tvp514x_s_fmt_cap() - V4L2 decoder interface handler for s_fmt
- * @sd: pointer to standard V4L2 sub-device structure
- * @f: pointer to standard V4L2 VIDIOC_S_FMT ioctl structure
- *
- * If the requested format is supported, configures the HW to use that
- * format, returns error code if format not supported or HW can't be
- * correctly configured.
- */
-static int
-tvp514x_s_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
-{
- struct tvp514x_decoder *decoder = to_decoder(sd);
- struct v4l2_pix_format *pix;
- int rval;
-
- if (f == NULL)
- return -EINVAL;
-
- if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- /* only capture is supported */
- return -EINVAL;
-
- pix = &f->fmt.pix;
- rval = tvp514x_try_fmt_cap(sd, f);
- if (rval)
- return rval;
-
- decoder->pix = *pix;
-
- return rval;
-}
-
-/**
- * tvp514x_g_fmt_cap() - V4L2 decoder interface handler for tvp514x_g_fmt_cap
- * @sd: pointer to standard V4L2 sub-device structure
- * @f: pointer to standard V4L2 v4l2_format structure
- *
- * Returns the decoder's current pixel format in the v4l2_format
- * parameter.
- */
-static int
-tvp514x_g_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
-{
- struct tvp514x_decoder *decoder = to_decoder(sd);
-
- if (f == NULL)
- return -EINVAL;
-
- if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- /* only capture is supported */
- return -EINVAL;
-
- f->fmt.pix = decoder->pix;
-
- v4l2_dbg(1, debug, sd, "Current FMT: bytesperline - %d"
- "Width - %d, Height - %d",
- decoder->pix.bytesperline,
- decoder->pix.width, decoder->pix.height);
- return 0;
-}
-
-/**
* tvp514x_g_parm() - V4L2 decoder interface handler for g_parm
* @sd: pointer to standard V4L2 sub-device structure
* @a: pointer to standard V4L2 VIDIOC_G_PARM ioctl structure
@@ -1132,15 +1016,8 @@
/* only capture is supported */
return -EINVAL;
- memset(a, 0, sizeof(*a));
- a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-
/* get the current standard */
- current_std = tvp514x_get_current_std(sd);
- if (current_std == STD_INVALID)
- return -EINVAL;
-
- decoder->current_std = current_std;
+ current_std = decoder->current_std;
cparm = &a->parm.capture;
cparm->capability = V4L2_CAP_TIMEPERFRAME;
@@ -1175,11 +1052,7 @@
timeperframe = &a->parm.capture.timeperframe;
/* get the current standard */
- current_std = tvp514x_get_current_std(sd);
- if (current_std == STD_INVALID)
- return -EINVAL;
-
- decoder->current_std = current_std;
+ current_std = decoder->current_std;
*timeperframe =
decoder->std_list[current_std].standard.frameperiod;
@@ -1259,9 +1132,9 @@
.s_routing = tvp514x_s_routing,
.querystd = tvp514x_querystd,
.enum_fmt = tvp514x_enum_fmt_cap,
- .g_fmt = tvp514x_g_fmt_cap,
- .try_fmt = tvp514x_try_fmt_cap,
- .s_fmt = tvp514x_s_fmt_cap,
+ .g_fmt = tvp514x_fmt_cap,
+ .try_fmt = tvp514x_fmt_cap,
+ .s_fmt = tvp514x_fmt_cap,
.g_parm = tvp514x_g_parm,
.s_parm = tvp514x_s_parm,
.s_stream = tvp514x_s_stream,
@@ -1274,22 +1147,6 @@
static struct tvp514x_decoder tvp514x_dev = {
.streaming = 0,
-
- .fmt_list = tvp514x_fmt_list,
- .num_fmts = ARRAY_SIZE(tvp514x_fmt_list),
-
- .pix = {
- /* Default to NTSC 8-bit YUV 422 */
- .width = NTSC_NUM_ACTIVE_PIXELS,
- .height = NTSC_NUM_ACTIVE_LINES,
- .pixelformat = V4L2_PIX_FMT_UYVY,
- .field = V4L2_FIELD_INTERLACED,
- .bytesperline = NTSC_NUM_ACTIVE_PIXELS * 2,
- .sizeimage =
- NTSC_NUM_ACTIVE_PIXELS * 2 * NTSC_NUM_ACTIVE_LINES,
- .colorspace = V4L2_COLORSPACE_SMPTE170M,
- },
-
.current_std = STD_NTSC_MJ,
.std_list = tvp514x_std_list,
.num_stds = ARRAY_SIZE(tvp514x_std_list),
diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c
index 47f0582..1654f65 100644
--- a/drivers/media/video/tvp5150.c
+++ b/drivers/media/video/tvp5150.c
@@ -934,17 +934,6 @@
return 0;
}
-static int tvp5150_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
- switch (fmt->type) {
- case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
- return tvp5150_s_sliced_fmt(sd, &fmt->fmt.sliced);
-
- default:
- return -EINVAL;
- }
-}
-
static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
{
int i, mask = 0;
@@ -960,13 +949,6 @@
return 0;
}
-static int tvp5150_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
- if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
- return -EINVAL;
- return tvp5150_g_sliced_fmt(sd, &fmt->fmt.sliced);
-}
-
static int tvp5150_g_chip_ident(struct v4l2_subdev *sd,
struct v4l2_dbg_chip_ident *chip)
{
@@ -1054,8 +1036,6 @@
static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
.s_routing = tvp5150_s_routing,
- .g_fmt = tvp5150_g_fmt,
- .s_fmt = tvp5150_s_fmt,
};
static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = {
diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c
index 76be733..445dc93 100644
--- a/drivers/media/video/tw9910.c
+++ b/drivers/media/video/tw9910.c
@@ -903,7 +903,7 @@
#endif
};
-static int tw9910_enum_fmt(struct v4l2_subdev *sd, int index,
+static int tw9910_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
enum v4l2_mbus_pixelcode *code)
{
if (index)
@@ -977,7 +977,6 @@
ret = tw9910_video_probe(icd, client);
if (ret) {
icd->ops = NULL;
- i2c_set_clientdata(client, NULL);
kfree(priv);
}
@@ -990,7 +989,6 @@
struct soc_camera_device *icd = client->dev.platform_data;
icd->ops = NULL;
- i2c_set_clientdata(client, NULL);
kfree(priv);
return 0;
}
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 6248a63..c2690df 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -1671,8 +1671,7 @@
PDEBUG(DBG_PROBE, "");
if (usbvision == NULL) {
- dev_err(&usbvision->dev->dev,
- "%s: usb_get_intfdata() failed\n", __func__);
+ pr_err("%s: usb_get_intfdata() failed\n", __func__);
return;
}
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index aa0720a..27a79f0 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -122,8 +122,8 @@
.selector = UVC_PU_POWER_LINE_FREQUENCY_CONTROL,
.index = 10,
.size = 1,
- .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
- | UVC_CONTROL_RESTORE,
+ .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR
+ | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE,
},
{
.entity = UVC_GUID_UVC_PROCESSING,
diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c
index d33693c..c4b117f 100644
--- a/drivers/message/i2o/i2o_config.c
+++ b/drivers/message/i2o/i2o_config.c
@@ -186,14 +186,9 @@
if (!dev)
return -ENXIO;
- ops = kmalloc(kcmd.oplen, GFP_KERNEL);
- if (!ops)
- return -ENOMEM;
-
- if (copy_from_user(ops, kcmd.opbuf, kcmd.oplen)) {
- kfree(ops);
- return -EFAULT;
- }
+ ops = memdup_user(kcmd.opbuf, kcmd.oplen);
+ if (IS_ERR(ops))
+ return PTR_ERR(ops);
/*
* It's possible to have a _very_ large table
diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c
index 405d2d5..2c65a2c 100644
--- a/drivers/mfd/88pm860x-core.c
+++ b/drivers/mfd/88pm860x-core.c
@@ -566,7 +566,7 @@
return ret;
}
-static void __devexit device_irq_exit(struct pm860x_chip *chip)
+static void device_irq_exit(struct pm860x_chip *chip)
{
if (chip->core_irq)
free_irq(chip->core_irq, chip);
@@ -703,7 +703,7 @@
return;
}
-int pm860x_device_init(struct pm860x_chip *chip,
+int __devinit pm860x_device_init(struct pm860x_chip *chip,
struct pm860x_platform_data *pdata)
{
chip->core_irq = 0;
@@ -731,7 +731,7 @@
return 0;
}
-void pm860x_device_exit(struct pm860x_chip *chip)
+void __devexit pm860x_device_exit(struct pm860x_chip *chip)
{
device_irq_exit(chip);
mfd_remove_devices(chip->dev);
diff --git a/drivers/mfd/88pm860x-i2c.c b/drivers/mfd/88pm860x-i2c.c
index 4a6e718..bc02e6b 100644
--- a/drivers/mfd/88pm860x-i2c.c
+++ b/drivers/mfd/88pm860x-i2c.c
@@ -200,8 +200,6 @@
pm860x_device_exit(chip);
i2c_unregister_device(chip->companion);
- i2c_set_clientdata(chip->companion, NULL);
- i2c_set_clientdata(chip->client, NULL);
kfree(chip);
return 0;
}
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3c6a986..9da0e50 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2,8 +2,14 @@
# Multifunction miscellaneous devices
#
-menu "Multifunction device drivers"
+menuconfig MFD_SUPPORT
+ bool "Multifunction device drivers"
depends on HAS_IOMEM
+ default y
+ help
+ Configure MFD device drivers.
+
+if MFD_SUPPORT
config MFD_CORE
tristate
@@ -116,6 +122,18 @@
This driver can also be built as a module. If so, the module
will be called tps65010.
+config TPS6507X
+ tristate "TPS6507x Power Management / Touch Screen chips"
+ select MFD_CORE
+ depends on I2C
+ help
+ If you say yes here you get support for the TPS6507x series of
+ Power Management / Touch Screen chips. These include voltage
+ regulators, lithium ion/polymer battery charging, touch screen
+ and other features that are often used in portable devices.
+ This driver can also be built as a module. If so, the module
+ will be called tps6507x.
+
config MENELAUS
bool "Texas Instruments TWL92330/Menelaus PM chip"
depends on I2C=y && ARCH_OMAP2
@@ -159,6 +177,17 @@
select MFD_CORE
default n
+config MFD_TC35892
+ bool "Support Toshiba TC35892"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ help
+ Support for the Toshiba TC35892 I/O Expander.
+
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
config MFD_TMIO
bool
default n
@@ -351,9 +380,19 @@
Say yes here if you want to include support GPIO for pins on
the PCF50633 chip.
+config ABX500_CORE
+ bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
+ default y if ARCH_U300
+ help
+ Say yes here if you have the ABX500 Mixed Signal IC family
+ chips. This core driver expose register access functions.
+ Functionality specific drivers using these functions can
+ remain unchanged when IC changes. Binding of the functions to
+ actual register access is done by the IC core driver.
+
config AB3100_CORE
bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
- depends on I2C=y
+ depends on I2C=y && ABX500_CORE
default y if ARCH_U300
help
Select this to enable the AB3100 Mixed Signal IC core
@@ -381,15 +420,30 @@
This enables the PCAP ASIC present on EZX Phones. This is
needed for MMC, TouchScreen, Sound, USB, etc..
-config AB4500_CORE
- tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
- depends on SPI
+config AB8500_CORE
+ bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
+ depends on SPI=y && GENERIC_HARDIRQS
+ select MFD_CORE
help
- Select this option to enable access to AB4500 power management
+ Select this option to enable access to AB8500 power management
chip. This connects to U8500 on the SSP/SPI bus and exports
read/write functions for the devices to get access to this chip.
This chip embeds various other multimedia funtionalities as well.
+config AB3550_CORE
+ bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions"
+ select MFD_CORE
+ depends on I2C=y && GENERIC_HARDIRQS && ABX500_CORE
+ help
+ Select this to enable the AB3550 Mixed Signal IC core
+ functionality. This connects to a AB3550 on the I2C bus
+ and expose a number of symbols needed for dependent devices
+ to read and write registers and subscribe to events from
+ this multi-functional IC. This is needed to use other features
+ of the AB3550 such as battery-backed RTC, charging control,
+ LEDs, vibrator, system power and temperature, power management
+ and ALSA sound.
+
config MFD_TIMBERDALE
tristate "Support for the Timberdale FPGA"
select MFD_CORE
@@ -409,7 +463,26 @@
LPC bridge function of the Intel SCH provides support for
System Management Bus and General Purpose I/O.
-endmenu
+config MFD_RDC321X
+ tristate "Support for RDC-R321x southbridge"
+ select MFD_CORE
+ depends on PCI
+ help
+ Say yes here if you want to have support for the RDC R-321x SoC
+ southbridge which provides access to GPIOs and Watchdog using the
+ southbridge PCI device configuration space.
+
+config MFD_JANZ_CMODIO
+ tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
+ select MFD_CORE
+ depends on PCI
+ help
+ This is the core driver for the Janz CMOD-IO PCI MODULbus
+ carrier board. This device is a PCI to MODULbus bridge which may
+ host many different types of MODULbus daughterboards, including
+ CAN and GPIO controllers.
+
+endif # MFD_SUPPORT
menu "Multimedia Capabilities Port drivers"
depends on ARCH_SA1100
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 87935f9..fb503e7 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -15,6 +15,7 @@
obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o
obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
+obj-$(CONFIG_MFD_TC35892) += tc35892.o
obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o tmio_core.o
obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o tmio_core.o
obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o tmio_core.o
@@ -29,6 +30,7 @@
obj-$(CONFIG_MFD_WM8994) += wm8994-core.o wm8994-irq.o
obj-$(CONFIG_TPS65010) += tps65010.o
+obj-$(CONFIG_TPS6507X) += tps6507x.o
obj-$(CONFIG_MENELAUS) += menelaus.o
obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o twl6030-irq.o
@@ -55,12 +57,17 @@
max8925-objs := max8925-core.o max8925-i2c.o
obj-$(CONFIG_MFD_MAX8925) += max8925.o
-obj-$(CONFIG_MFD_PCF50633) += pcf50633-core.o
+pcf50633-objs := pcf50633-core.o pcf50633-irq.o
+obj-$(CONFIG_MFD_PCF50633) += pcf50633.o
obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o
obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o
+obj-$(CONFIG_ABX500_CORE) += abx500-core.o
obj-$(CONFIG_AB3100_CORE) += ab3100-core.o
obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o
-obj-$(CONFIG_AB4500_CORE) += ab4500-core.o
+obj-$(CONFIG_AB3550_CORE) += ab3550-core.o
+obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-spi.o
obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o
obj-$(CONFIG_PMIC_ADP5520) += adp5520.o
-obj-$(CONFIG_LPC_SCH) += lpc_sch.o
\ No newline at end of file
+obj-$(CONFIG_LPC_SCH) += lpc_sch.o
+obj-$(CONFIG_MFD_RDC321X) += rdc321x-southbridge.o
+obj-$(CONFIG_MFD_JANZ_CMODIO) += janz-cmodio.o
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index e4ca590..66379b4 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -19,7 +19,7 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/uaccess.h>
-#include <linux/mfd/ab3100.h>
+#include <linux/mfd/abx500.h>
/* These are the only registers inside AB3100 used in this main file */
@@ -59,24 +59,15 @@
* The AB3100 is usually assigned address 0x48 (7-bit)
* The chip is defined in the platform i2c_board_data section.
*/
-
-u8 ab3100_get_chip_type(struct ab3100 *ab3100)
+static int ab3100_get_chip_id(struct device *dev)
{
- u8 chip = ABUNKNOWN;
+ struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
- switch (ab3100->chip_id & 0xf0) {
- case 0xa0:
- chip = AB3000;
- break;
- case 0xc0:
- chip = AB3100;
- break;
- }
- return chip;
+ return (int)ab3100->chip_id;
}
-EXPORT_SYMBOL(ab3100_get_chip_type);
-int ab3100_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval)
+static int ab3100_set_register_interruptible(struct ab3100 *ab3100,
+ u8 reg, u8 regval)
{
u8 regandval[2] = {reg, regval};
int err;
@@ -108,8 +99,14 @@
mutex_unlock(&ab3100->access_mutex);
return err;
}
-EXPORT_SYMBOL(ab3100_set_register_interruptible);
+static int set_register_interruptible(struct device *dev,
+ u8 bank, u8 reg, u8 value)
+{
+ struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
+
+ return ab3100_set_register_interruptible(ab3100, reg, value);
+}
/*
* The test registers exist at an I2C bus address up one
@@ -148,8 +145,8 @@
return err;
}
-
-int ab3100_get_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 *regval)
+static int ab3100_get_register_interruptible(struct ab3100 *ab3100,
+ u8 reg, u8 *regval)
{
int err;
@@ -203,10 +200,16 @@
mutex_unlock(&ab3100->access_mutex);
return err;
}
-EXPORT_SYMBOL(ab3100_get_register_interruptible);
+static int get_register_interruptible(struct device *dev, u8 bank, u8 reg,
+ u8 *value)
+{
+ struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
-int ab3100_get_register_page_interruptible(struct ab3100 *ab3100,
+ return ab3100_get_register_interruptible(ab3100, reg, value);
+}
+
+static int ab3100_get_register_page_interruptible(struct ab3100 *ab3100,
u8 first_reg, u8 *regvals, u8 numregs)
{
int err;
@@ -260,10 +263,17 @@
mutex_unlock(&ab3100->access_mutex);
return err;
}
-EXPORT_SYMBOL(ab3100_get_register_page_interruptible);
+static int get_register_page_interruptible(struct device *dev, u8 bank,
+ u8 first_reg, u8 *regvals, u8 numregs)
+{
+ struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
-int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100,
+ return ab3100_get_register_page_interruptible(ab3100,
+ first_reg, regvals, numregs);
+}
+
+static int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100,
u8 reg, u8 andmask, u8 ormask)
{
u8 regandval[2] = {reg, 0};
@@ -331,8 +341,15 @@
mutex_unlock(&ab3100->access_mutex);
return err;
}
-EXPORT_SYMBOL(ab3100_mask_and_set_register_interruptible);
+static int mask_and_set_register_interruptible(struct device *dev, u8 bank,
+ u8 reg, u8 bitmask, u8 bitvalues)
+{
+ struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
+
+ return ab3100_mask_and_set_register_interruptible(ab3100,
+ reg, bitmask, (bitmask & bitvalues));
+}
/*
* Register a simple callback for handling any AB3100 events.
@@ -357,15 +374,27 @@
EXPORT_SYMBOL(ab3100_event_unregister);
-int ab3100_event_registers_startup_state_get(struct ab3100 *ab3100,
- u32 *fatevent)
+static int ab3100_event_registers_startup_state_get(struct device *dev,
+ u8 *event)
{
+ struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
if (!ab3100->startup_events_read)
return -EAGAIN; /* Try again later */
- *fatevent = ab3100->startup_events;
+ memcpy(event, ab3100->startup_events, 3);
return 0;
}
-EXPORT_SYMBOL(ab3100_event_registers_startup_state_get);
+
+static struct abx500_ops ab3100_ops = {
+ .get_chip_id = ab3100_get_chip_id,
+ .set_register = set_register_interruptible,
+ .get_register = get_register_interruptible,
+ .get_register_page = get_register_page_interruptible,
+ .set_register_page = NULL,
+ .mask_and_set_register = mask_and_set_register_interruptible,
+ .event_registers_startup_state_get =
+ ab3100_event_registers_startup_state_get,
+ .startup_irq_enabled = NULL,
+};
/*
* This is a threaded interrupt handler so we can make some
@@ -390,7 +419,9 @@
event_regs[2];
if (!ab3100->startup_events_read) {
- ab3100->startup_events = fatevent;
+ ab3100->startup_events[0] = event_regs[0];
+ ab3100->startup_events[1] = event_regs[1];
+ ab3100->startup_events[2] = event_regs[2];
ab3100->startup_events_read = true;
}
/*
@@ -703,7 +734,8 @@
dev_warn(ab3100->dev,
"AB3100 P1E variant detected, "
"forcing chip to 32KHz\n");
- err = ab3100_set_test_register_interruptible(ab3100, 0x02, 0x08);
+ err = ab3100_set_test_register_interruptible(ab3100,
+ 0x02, 0x08);
}
exit_no_setup:
@@ -898,6 +930,10 @@
if (err)
goto exit_no_irq;
+ err = abx500_register_ops(&client->dev, &ab3100_ops);
+ if (err)
+ goto exit_no_ops;
+
/* Set parent and a pointer back to the container in device data */
for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++) {
ab3100_platform_devs[i]->dev.parent =
@@ -915,6 +951,7 @@
return 0;
+ exit_no_ops:
exit_no_irq:
exit_no_setup:
i2c_unregister_device(ab3100->testreg_client);
diff --git a/drivers/mfd/ab3100-otp.c b/drivers/mfd/ab3100-otp.c
index 2d14655..63d2b72 100644
--- a/drivers/mfd/ab3100-otp.c
+++ b/drivers/mfd/ab3100-otp.c
@@ -12,7 +12,7 @@
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mfd/ab3100.h>
+#include <linux/mfd/abx500.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
@@ -30,7 +30,6 @@
/**
* struct ab3100_otp
* @dev containing device
- * @ab3100 a pointer to the parent ab3100 device struct
* @locked whether the OTP is locked, after locking, no more bits
* can be changed but before locking it is still possible
* to change bits from 1->0.
@@ -49,7 +48,6 @@
*/
struct ab3100_otp {
struct device *dev;
- struct ab3100 *ab3100;
bool locked;
u32 freq;
bool paf;
@@ -63,19 +61,19 @@
static int __init ab3100_otp_read(struct ab3100_otp *otp)
{
- struct ab3100 *ab = otp->ab3100;
u8 otpval[8];
u8 otpp;
int err;
- err = ab3100_get_register_interruptible(ab, AB3100_OTPP, &otpp);
+ err = abx500_get_register_interruptible(otp->dev, 0,
+ AB3100_OTPP, &otpp);
if (err) {
dev_err(otp->dev, "unable to read OTPP register\n");
return err;
}
- err = ab3100_get_register_page_interruptible(ab, AB3100_OTP0,
- otpval, 8);
+ err = abx500_get_register_page_interruptible(otp->dev, 0,
+ AB3100_OTP0, otpval, 8);
if (err) {
dev_err(otp->dev, "unable to read OTP register page\n");
return err;
@@ -197,7 +195,6 @@
otp->dev = &pdev->dev;
/* Replace platform data coming in with a local struct */
- otp->ab3100 = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, otp);
err = ab3100_otp_read(otp);
diff --git a/drivers/mfd/ab3550-core.c b/drivers/mfd/ab3550-core.c
new file mode 100644
index 0000000..f54ab62
--- /dev/null
+++ b/drivers/mfd/ab3550-core.c
@@ -0,0 +1,1400 @@
+/*
+ * Copyright (C) 2007-2010 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Low-level core for exclusive access to the AB3550 IC on the I2C bus
+ * and some basic chip-configuration.
+ * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
+ * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/random.h>
+#include <linux/workqueue.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+#include <linux/mfd/abx500.h>
+#include <linux/list.h>
+#include <linux/bitops.h>
+#include <linux/spinlock.h>
+#include <linux/mfd/core.h>
+
+#define AB3550_NAME_STRING "ab3550"
+#define AB3550_ID_FORMAT_STRING "AB3550 %s"
+#define AB3550_NUM_BANKS 2
+#define AB3550_NUM_EVENT_REG 5
+
+/* These are the only registers inside AB3550 used in this main file */
+
+/* Chip ID register */
+#define AB3550_CID_REG 0x20
+
+/* Interrupt event registers */
+#define AB3550_EVENT_BANK 0
+#define AB3550_EVENT_REG 0x22
+
+/* Read/write operation values. */
+#define AB3550_PERM_RD (0x01)
+#define AB3550_PERM_WR (0x02)
+
+/* Read/write permissions. */
+#define AB3550_PERM_RO (AB3550_PERM_RD)
+#define AB3550_PERM_RW (AB3550_PERM_RD | AB3550_PERM_WR)
+
+/**
+ * struct ab3550
+ * @access_mutex: lock out concurrent accesses to the AB registers
+ * @i2c_client: I2C client for this chip
+ * @chip_name: name of this chip variant
+ * @chip_id: 8 bit chip ID for this chip variant
+ * @mask_work: a worker for writing to mask registers
+ * @event_lock: a lock to protect the event_mask
+ * @event_mask: a local copy of the mask event registers
+ * @startup_events: a copy of the first reading of the event registers
+ * @startup_events_read: whether the first events have been read
+ */
+struct ab3550 {
+ struct mutex access_mutex;
+ struct i2c_client *i2c_client[AB3550_NUM_BANKS];
+ char chip_name[32];
+ u8 chip_id;
+ struct work_struct mask_work;
+ spinlock_t event_lock;
+ u8 event_mask[AB3550_NUM_EVENT_REG];
+ u8 startup_events[AB3550_NUM_EVENT_REG];
+ bool startup_events_read;
+#ifdef CONFIG_DEBUG_FS
+ unsigned int debug_bank;
+ unsigned int debug_address;
+#endif
+};
+
+/**
+ * struct ab3550_reg_range
+ * @first: the first address of the range
+ * @last: the last address of the range
+ * @perm: access permissions for the range
+ */
+struct ab3550_reg_range {
+ u8 first;
+ u8 last;
+ u8 perm;
+};
+
+/**
+ * struct ab3550_reg_ranges
+ * @count: the number of ranges in the list
+ * @range: the list of register ranges
+ */
+struct ab3550_reg_ranges {
+ u8 count;
+ const struct ab3550_reg_range *range;
+};
+
+/*
+ * Permissible register ranges for reading and writing per device and bank.
+ *
+ * The ranges must be listed in increasing address order, and no overlaps are
+ * allowed. It is assumed that write permission implies read permission
+ * (i.e. only RO and RW permissions should be used). Ranges with write
+ * permission must not be split up.
+ */
+
+#define NO_RANGE {.count = 0, .range = NULL,}
+
+static struct
+ab3550_reg_ranges ab3550_reg_ranges[AB3550_NUM_DEVICES][AB3550_NUM_BANKS] = {
+ [AB3550_DEVID_DAC] = {
+ NO_RANGE,
+ {
+ .count = 2,
+ .range = (struct ab3550_reg_range[]) {
+ {
+ .first = 0xb0,
+ .last = 0xba,
+ .perm = AB3550_PERM_RW,
+ },
+ {
+ .first = 0xbc,
+ .last = 0xc3,
+ .perm = AB3550_PERM_RW,
+ },
+ },
+ },
+ },
+ [AB3550_DEVID_LEDS] = {
+ NO_RANGE,
+ {
+ .count = 2,
+ .range = (struct ab3550_reg_range[]) {
+ {
+ .first = 0x5a,
+ .last = 0x88,
+ .perm = AB3550_PERM_RW,
+ },
+ {
+ .first = 0x8a,
+ .last = 0xad,
+ .perm = AB3550_PERM_RW,
+ },
+ }
+ },
+ },
+ [AB3550_DEVID_POWER] = {
+ {
+ .count = 1,
+ .range = (struct ab3550_reg_range[]) {
+ {
+ .first = 0x21,
+ .last = 0x21,
+ .perm = AB3550_PERM_RO,
+ },
+ }
+ },
+ NO_RANGE,
+ },
+ [AB3550_DEVID_REGULATORS] = {
+ {
+ .count = 1,
+ .range = (struct ab3550_reg_range[]) {
+ {
+ .first = 0x69,
+ .last = 0xa3,
+ .perm = AB3550_PERM_RW,
+ },
+ }
+ },
+ {
+ .count = 1,
+ .range = (struct ab3550_reg_range[]) {
+ {
+ .first = 0x14,
+ .last = 0x16,
+ .perm = AB3550_PERM_RW,
+ },
+ }
+ },
+ },
+ [AB3550_DEVID_SIM] = {
+ {
+ .count = 1,
+ .range = (struct ab3550_reg_range[]) {
+ {
+ .first = 0x21,
+ .last = 0x21,
+ .perm = AB3550_PERM_RO,
+ },
+ }
+ },
+ {
+ .count = 1,
+ .range = (struct ab3550_reg_range[]) {
+ {
+ .first = 0x14,
+ .last = 0x17,
+ .perm = AB3550_PERM_RW,
+ },
+ }
+
+ },
+ },
+ [AB3550_DEVID_UART] = {
+ NO_RANGE,
+ NO_RANGE,
+ },
+ [AB3550_DEVID_RTC] = {
+ {
+ .count = 1,
+ .range = (struct ab3550_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x0c,
+ .perm = AB3550_PERM_RW,
+ },
+ }
+ },
+ NO_RANGE,
+ },
+ [AB3550_DEVID_CHARGER] = {
+ {
+ .count = 2,
+ .range = (struct ab3550_reg_range[]) {
+ {
+ .first = 0x10,
+ .last = 0x1a,
+ .perm = AB3550_PERM_RW,
+ },
+ {
+ .first = 0x21,
+ .last = 0x21,
+ .perm = AB3550_PERM_RO,
+ },
+ }
+ },
+ NO_RANGE,
+ },
+ [AB3550_DEVID_ADC] = {
+ NO_RANGE,
+ {
+ .count = 1,
+ .range = (struct ab3550_reg_range[]) {
+ {
+ .first = 0x20,
+ .last = 0x56,
+ .perm = AB3550_PERM_RW,
+ },
+
+ }
+ },
+ },
+ [AB3550_DEVID_FUELGAUGE] = {
+ {
+ .count = 1,
+ .range = (struct ab3550_reg_range[]) {
+ {
+ .first = 0x21,
+ .last = 0x21,
+ .perm = AB3550_PERM_RO,
+ },
+ }
+ },
+ {
+ .count = 1,
+ .range = (struct ab3550_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x0e,
+ .perm = AB3550_PERM_RW,
+ },
+ }
+ },
+ },
+ [AB3550_DEVID_VIBRATOR] = {
+ NO_RANGE,
+ {
+ .count = 1,
+ .range = (struct ab3550_reg_range[]) {
+ {
+ .first = 0x10,
+ .last = 0x13,
+ .perm = AB3550_PERM_RW,
+ },
+
+ }
+ },
+ },
+ [AB3550_DEVID_CODEC] = {
+ {
+ .count = 2,
+ .range = (struct ab3550_reg_range[]) {
+ {
+ .first = 0x31,
+ .last = 0x63,
+ .perm = AB3550_PERM_RW,
+ },
+ {
+ .first = 0x65,
+ .last = 0x68,
+ .perm = AB3550_PERM_RW,
+ },
+ }
+ },
+ NO_RANGE,
+ },
+};
+
+static struct mfd_cell ab3550_devs[AB3550_NUM_DEVICES] = {
+ [AB3550_DEVID_DAC] = {
+ .name = "ab3550-dac",
+ .id = AB3550_DEVID_DAC,
+ .num_resources = 0,
+ },
+ [AB3550_DEVID_LEDS] = {
+ .name = "ab3550-leds",
+ .id = AB3550_DEVID_LEDS,
+ },
+ [AB3550_DEVID_POWER] = {
+ .name = "ab3550-power",
+ .id = AB3550_DEVID_POWER,
+ },
+ [AB3550_DEVID_REGULATORS] = {
+ .name = "ab3550-regulators",
+ .id = AB3550_DEVID_REGULATORS,
+ },
+ [AB3550_DEVID_SIM] = {
+ .name = "ab3550-sim",
+ .id = AB3550_DEVID_SIM,
+ },
+ [AB3550_DEVID_UART] = {
+ .name = "ab3550-uart",
+ .id = AB3550_DEVID_UART,
+ },
+ [AB3550_DEVID_RTC] = {
+ .name = "ab3550-rtc",
+ .id = AB3550_DEVID_RTC,
+ },
+ [AB3550_DEVID_CHARGER] = {
+ .name = "ab3550-charger",
+ .id = AB3550_DEVID_CHARGER,
+ },
+ [AB3550_DEVID_ADC] = {
+ .name = "ab3550-adc",
+ .id = AB3550_DEVID_ADC,
+ .num_resources = 10,
+ .resources = (struct resource[]) {
+ {
+ .name = "TRIGGER-0",
+ .flags = IORESOURCE_IRQ,
+ .start = 16,
+ .end = 16,
+ },
+ {
+ .name = "TRIGGER-1",
+ .flags = IORESOURCE_IRQ,
+ .start = 17,
+ .end = 17,
+ },
+ {
+ .name = "TRIGGER-2",
+ .flags = IORESOURCE_IRQ,
+ .start = 18,
+ .end = 18,
+ },
+ {
+ .name = "TRIGGER-3",
+ .flags = IORESOURCE_IRQ,
+ .start = 19,
+ .end = 19,
+ },
+ {
+ .name = "TRIGGER-4",
+ .flags = IORESOURCE_IRQ,
+ .start = 20,
+ .end = 20,
+ },
+ {
+ .name = "TRIGGER-5",
+ .flags = IORESOURCE_IRQ,
+ .start = 21,
+ .end = 21,
+ },
+ {
+ .name = "TRIGGER-6",
+ .flags = IORESOURCE_IRQ,
+ .start = 22,
+ .end = 22,
+ },
+ {
+ .name = "TRIGGER-7",
+ .flags = IORESOURCE_IRQ,
+ .start = 23,
+ .end = 23,
+ },
+ {
+ .name = "TRIGGER-VBAT-TXON",
+ .flags = IORESOURCE_IRQ,
+ .start = 13,
+ .end = 13,
+ },
+ {
+ .name = "TRIGGER-VBAT",
+ .flags = IORESOURCE_IRQ,
+ .start = 12,
+ .end = 12,
+ },
+ },
+ },
+ [AB3550_DEVID_FUELGAUGE] = {
+ .name = "ab3550-fuelgauge",
+ .id = AB3550_DEVID_FUELGAUGE,
+ },
+ [AB3550_DEVID_VIBRATOR] = {
+ .name = "ab3550-vibrator",
+ .id = AB3550_DEVID_VIBRATOR,
+ },
+ [AB3550_DEVID_CODEC] = {
+ .name = "ab3550-codec",
+ .id = AB3550_DEVID_CODEC,
+ },
+};
+
+/*
+ * I2C transactions with error messages.
+ */
+static int ab3550_i2c_master_send(struct ab3550 *ab, u8 bank, u8 *data,
+ u8 count)
+{
+ int err;
+
+ err = i2c_master_send(ab->i2c_client[bank], data, count);
+ if (err < 0) {
+ dev_err(&ab->i2c_client[0]->dev, "send error: %d\n", err);
+ return err;
+ }
+ return 0;
+}
+
+static int ab3550_i2c_master_recv(struct ab3550 *ab, u8 bank, u8 *data,
+ u8 count)
+{
+ int err;
+
+ err = i2c_master_recv(ab->i2c_client[bank], data, count);
+ if (err < 0) {
+ dev_err(&ab->i2c_client[0]->dev, "receive error: %d\n", err);
+ return err;
+ }
+ return 0;
+}
+
+/*
+ * Functionality for getting/setting register values.
+ */
+static int get_register_interruptible(struct ab3550 *ab, u8 bank, u8 reg,
+ u8 *value)
+{
+ int err;
+
+ err = mutex_lock_interruptible(&ab->access_mutex);
+ if (err)
+ return err;
+
+ err = ab3550_i2c_master_send(ab, bank, ®, 1);
+ if (!err)
+ err = ab3550_i2c_master_recv(ab, bank, value, 1);
+
+ mutex_unlock(&ab->access_mutex);
+ return err;
+}
+
+static int get_register_page_interruptible(struct ab3550 *ab, u8 bank,
+ u8 first_reg, u8 *regvals, u8 numregs)
+{
+ int err;
+
+ err = mutex_lock_interruptible(&ab->access_mutex);
+ if (err)
+ return err;
+
+ err = ab3550_i2c_master_send(ab, bank, &first_reg, 1);
+ if (!err)
+ err = ab3550_i2c_master_recv(ab, bank, regvals, numregs);
+
+ mutex_unlock(&ab->access_mutex);
+ return err;
+}
+
+static int mask_and_set_register_interruptible(struct ab3550 *ab, u8 bank,
+ u8 reg, u8 bitmask, u8 bitvalues)
+{
+ int err = 0;
+
+ if (likely(bitmask)) {
+ u8 reg_bits[2] = {reg, 0};
+
+ err = mutex_lock_interruptible(&ab->access_mutex);
+ if (err)
+ return err;
+
+ if (bitmask == 0xFF) /* No need to read in this case. */
+ reg_bits[1] = bitvalues;
+ else { /* Read and modify the register value. */
+ u8 bits;
+
+ err = ab3550_i2c_master_send(ab, bank, ®, 1);
+ if (err)
+ goto unlock_and_return;
+ err = ab3550_i2c_master_recv(ab, bank, &bits, 1);
+ if (err)
+ goto unlock_and_return;
+ reg_bits[1] = ((~bitmask & bits) |
+ (bitmask & bitvalues));
+ }
+ /* Write the new value. */
+ err = ab3550_i2c_master_send(ab, bank, reg_bits, 2);
+unlock_and_return:
+ mutex_unlock(&ab->access_mutex);
+ }
+ return err;
+}
+
+/*
+ * Read/write permission checking functions.
+ */
+static bool page_write_allowed(const struct ab3550_reg_ranges *ranges,
+ u8 first_reg, u8 last_reg)
+{
+ u8 i;
+
+ if (last_reg < first_reg)
+ return false;
+
+ for (i = 0; i < ranges->count; i++) {
+ if (first_reg < ranges->range[i].first)
+ break;
+ if ((last_reg <= ranges->range[i].last) &&
+ (ranges->range[i].perm & AB3550_PERM_WR))
+ return true;
+ }
+ return false;
+}
+
+static bool reg_write_allowed(const struct ab3550_reg_ranges *ranges, u8 reg)
+{
+ return page_write_allowed(ranges, reg, reg);
+}
+
+static bool page_read_allowed(const struct ab3550_reg_ranges *ranges,
+ u8 first_reg, u8 last_reg)
+{
+ u8 i;
+
+ if (last_reg < first_reg)
+ return false;
+ /* Find the range (if it exists in the list) that includes first_reg. */
+ for (i = 0; i < ranges->count; i++) {
+ if (first_reg < ranges->range[i].first)
+ return false;
+ if (first_reg <= ranges->range[i].last)
+ break;
+ }
+ /* Make sure that the entire range up to and including last_reg is
+ * readable. This may span several of the ranges in the list.
+ */
+ while ((i < ranges->count) &&
+ (ranges->range[i].perm & AB3550_PERM_RD)) {
+ if (last_reg <= ranges->range[i].last)
+ return true;
+ if ((++i >= ranges->count) ||
+ (ranges->range[i].first !=
+ (ranges->range[i - 1].last + 1))) {
+ break;
+ }
+ }
+ return false;
+}
+
+static bool reg_read_allowed(const struct ab3550_reg_ranges *ranges, u8 reg)
+{
+ return page_read_allowed(ranges, reg, reg);
+}
+
+/*
+ * The exported register access functionality.
+ */
+int ab3550_get_chip_id(struct device *dev)
+{
+ struct ab3550 *ab = dev_get_drvdata(dev->parent);
+ return (int)ab->chip_id;
+}
+
+int ab3550_mask_and_set_register_interruptible(struct device *dev, u8 bank,
+ u8 reg, u8 bitmask, u8 bitvalues)
+{
+ struct ab3550 *ab;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if ((AB3550_NUM_BANKS <= bank) ||
+ !reg_write_allowed(&ab3550_reg_ranges[pdev->id][bank], reg))
+ return -EINVAL;
+
+ ab = dev_get_drvdata(dev->parent);
+ return mask_and_set_register_interruptible(ab, bank, reg,
+ bitmask, bitvalues);
+}
+
+int ab3550_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
+ u8 value)
+{
+ return ab3550_mask_and_set_register_interruptible(dev, bank, reg, 0xFF,
+ value);
+}
+
+int ab3550_get_register_interruptible(struct device *dev, u8 bank, u8 reg,
+ u8 *value)
+{
+ struct ab3550 *ab;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if ((AB3550_NUM_BANKS <= bank) ||
+ !reg_read_allowed(&ab3550_reg_ranges[pdev->id][bank], reg))
+ return -EINVAL;
+
+ ab = dev_get_drvdata(dev->parent);
+ return get_register_interruptible(ab, bank, reg, value);
+}
+
+int ab3550_get_register_page_interruptible(struct device *dev, u8 bank,
+ u8 first_reg, u8 *regvals, u8 numregs)
+{
+ struct ab3550 *ab;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if ((AB3550_NUM_BANKS <= bank) ||
+ !page_read_allowed(&ab3550_reg_ranges[pdev->id][bank],
+ first_reg, (first_reg + numregs - 1)))
+ return -EINVAL;
+
+ ab = dev_get_drvdata(dev->parent);
+ return get_register_page_interruptible(ab, bank, first_reg, regvals,
+ numregs);
+}
+
+int ab3550_event_registers_startup_state_get(struct device *dev, u8 *event)
+{
+ struct ab3550 *ab;
+
+ ab = dev_get_drvdata(dev->parent);
+ if (!ab->startup_events_read)
+ return -EAGAIN; /* Try again later */
+
+ memcpy(event, ab->startup_events, AB3550_NUM_EVENT_REG);
+ return 0;
+}
+
+int ab3550_startup_irq_enabled(struct device *dev, unsigned int irq)
+{
+ struct ab3550 *ab;
+ struct ab3550_platform_data *plf_data;
+ bool val;
+
+ ab = get_irq_chip_data(irq);
+ plf_data = ab->i2c_client[0]->dev.platform_data;
+ irq -= plf_data->irq.base;
+ val = ((ab->startup_events[irq / 8] & BIT(irq % 8)) != 0);
+
+ return val;
+}
+
+static struct abx500_ops ab3550_ops = {
+ .get_chip_id = ab3550_get_chip_id,
+ .get_register = ab3550_get_register_interruptible,
+ .set_register = ab3550_set_register_interruptible,
+ .get_register_page = ab3550_get_register_page_interruptible,
+ .set_register_page = NULL,
+ .mask_and_set_register = ab3550_mask_and_set_register_interruptible,
+ .event_registers_startup_state_get =
+ ab3550_event_registers_startup_state_get,
+ .startup_irq_enabled = ab3550_startup_irq_enabled,
+};
+
+static irqreturn_t ab3550_irq_handler(int irq, void *data)
+{
+ struct ab3550 *ab = data;
+ int err;
+ unsigned int i;
+ u8 e[AB3550_NUM_EVENT_REG];
+ u8 *events;
+ unsigned long flags;
+
+ events = (ab->startup_events_read ? e : ab->startup_events);
+
+ err = get_register_page_interruptible(ab, AB3550_EVENT_BANK,
+ AB3550_EVENT_REG, events, AB3550_NUM_EVENT_REG);
+ if (err)
+ goto err_event_rd;
+
+ if (!ab->startup_events_read) {
+ dev_info(&ab->i2c_client[0]->dev,
+ "startup events 0x%x,0x%x,0x%x,0x%x,0x%x\n",
+ ab->startup_events[0], ab->startup_events[1],
+ ab->startup_events[2], ab->startup_events[3],
+ ab->startup_events[4]);
+ ab->startup_events_read = true;
+ goto out;
+ }
+
+ /* The two highest bits in event[4] are not used. */
+ events[4] &= 0x3f;
+
+ spin_lock_irqsave(&ab->event_lock, flags);
+ for (i = 0; i < AB3550_NUM_EVENT_REG; i++)
+ events[i] &= ~ab->event_mask[i];
+ spin_unlock_irqrestore(&ab->event_lock, flags);
+
+ for (i = 0; i < AB3550_NUM_EVENT_REG; i++) {
+ u8 bit;
+ u8 event_reg;
+
+ dev_dbg(&ab->i2c_client[0]->dev, "IRQ Event[%d]: 0x%2x\n",
+ i, events[i]);
+
+ event_reg = events[i];
+ for (bit = 0; event_reg; bit++, event_reg /= 2) {
+ if (event_reg % 2) {
+ unsigned int irq;
+ struct ab3550_platform_data *plf_data;
+
+ plf_data = ab->i2c_client[0]->dev.platform_data;
+ irq = plf_data->irq.base + (i * 8) + bit;
+ handle_nested_irq(irq);
+ }
+ }
+ }
+out:
+ return IRQ_HANDLED;
+
+err_event_rd:
+ dev_dbg(&ab->i2c_client[0]->dev, "error reading event registers\n");
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static struct ab3550_reg_ranges debug_ranges[AB3550_NUM_BANKS] = {
+ {
+ .count = 6,
+ .range = (struct ab3550_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x0e,
+ },
+ {
+ .first = 0x10,
+ .last = 0x1a,
+ },
+ {
+ .first = 0x1e,
+ .last = 0x4f,
+ },
+ {
+ .first = 0x51,
+ .last = 0x63,
+ },
+ {
+ .first = 0x65,
+ .last = 0xa3,
+ },
+ {
+ .first = 0xa5,
+ .last = 0xa8,
+ },
+ }
+ },
+ {
+ .count = 8,
+ .range = (struct ab3550_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x0e,
+ },
+ {
+ .first = 0x10,
+ .last = 0x17,
+ },
+ {
+ .first = 0x1a,
+ .last = 0x1c,
+ },
+ {
+ .first = 0x20,
+ .last = 0x56,
+ },
+ {
+ .first = 0x5a,
+ .last = 0x88,
+ },
+ {
+ .first = 0x8a,
+ .last = 0xad,
+ },
+ {
+ .first = 0xb0,
+ .last = 0xba,
+ },
+ {
+ .first = 0xbc,
+ .last = 0xc3,
+ },
+ }
+ },
+};
+
+static int ab3550_registers_print(struct seq_file *s, void *p)
+{
+ struct ab3550 *ab = s->private;
+ int bank;
+
+ seq_printf(s, AB3550_NAME_STRING " register values:\n");
+
+ for (bank = 0; bank < AB3550_NUM_BANKS; bank++) {
+ unsigned int i;
+
+ seq_printf(s, " bank %d:\n", bank);
+ for (i = 0; i < debug_ranges[bank].count; i++) {
+ u8 reg;
+
+ for (reg = debug_ranges[bank].range[i].first;
+ reg <= debug_ranges[bank].range[i].last;
+ reg++) {
+ u8 value;
+
+ get_register_interruptible(ab, bank, reg,
+ &value);
+ seq_printf(s, " [%d/0x%02X]: 0x%02X\n", bank,
+ reg, value);
+ }
+ }
+ }
+ return 0;
+}
+
+static int ab3550_registers_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab3550_registers_print, inode->i_private);
+}
+
+static const struct file_operations ab3550_registers_fops = {
+ .open = ab3550_registers_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab3550_bank_print(struct seq_file *s, void *p)
+{
+ struct ab3550 *ab = s->private;
+
+ seq_printf(s, "%d\n", ab->debug_bank);
+ return 0;
+}
+
+static int ab3550_bank_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab3550_bank_print, inode->i_private);
+}
+
+static ssize_t ab3550_bank_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
+ char buf[32];
+ int buf_size;
+ unsigned long user_bank;
+ int err;
+
+ /* Get userspace string and assure termination */
+ buf_size = min(count, (sizeof(buf) - 1));
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ buf[buf_size] = 0;
+
+ err = strict_strtoul(buf, 0, &user_bank);
+ if (err)
+ return -EINVAL;
+
+ if (user_bank >= AB3550_NUM_BANKS) {
+ dev_err(&ab->i2c_client[0]->dev,
+ "debugfs error input > number of banks\n");
+ return -EINVAL;
+ }
+
+ ab->debug_bank = user_bank;
+
+ return buf_size;
+}
+
+static int ab3550_address_print(struct seq_file *s, void *p)
+{
+ struct ab3550 *ab = s->private;
+
+ seq_printf(s, "0x%02X\n", ab->debug_address);
+ return 0;
+}
+
+static int ab3550_address_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab3550_address_print, inode->i_private);
+}
+
+static ssize_t ab3550_address_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
+ char buf[32];
+ int buf_size;
+ unsigned long user_address;
+ int err;
+
+ /* Get userspace string and assure termination */
+ buf_size = min(count, (sizeof(buf) - 1));
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ buf[buf_size] = 0;
+
+ err = strict_strtoul(buf, 0, &user_address);
+ if (err)
+ return -EINVAL;
+ if (user_address > 0xff) {
+ dev_err(&ab->i2c_client[0]->dev,
+ "debugfs error input > 0xff\n");
+ return -EINVAL;
+ }
+ ab->debug_address = user_address;
+ return buf_size;
+}
+
+static int ab3550_val_print(struct seq_file *s, void *p)
+{
+ struct ab3550 *ab = s->private;
+ int err;
+ u8 regvalue;
+
+ err = get_register_interruptible(ab, (u8)ab->debug_bank,
+ (u8)ab->debug_address, ®value);
+ if (err)
+ return -EINVAL;
+ seq_printf(s, "0x%02X\n", regvalue);
+
+ return 0;
+}
+
+static int ab3550_val_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab3550_val_print, inode->i_private);
+}
+
+static ssize_t ab3550_val_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
+ char buf[32];
+ int buf_size;
+ unsigned long user_val;
+ int err;
+ u8 regvalue;
+
+ /* Get userspace string and assure termination */
+ buf_size = min(count, (sizeof(buf)-1));
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ buf[buf_size] = 0;
+
+ err = strict_strtoul(buf, 0, &user_val);
+ if (err)
+ return -EINVAL;
+ if (user_val > 0xff) {
+ dev_err(&ab->i2c_client[0]->dev,
+ "debugfs error input > 0xff\n");
+ return -EINVAL;
+ }
+ err = mask_and_set_register_interruptible(
+ ab, (u8)ab->debug_bank,
+ (u8)ab->debug_address, 0xFF, (u8)user_val);
+ if (err)
+ return -EINVAL;
+
+ get_register_interruptible(ab, (u8)ab->debug_bank,
+ (u8)ab->debug_address, ®value);
+ if (err)
+ return -EINVAL;
+
+ return buf_size;
+}
+
+static const struct file_operations ab3550_bank_fops = {
+ .open = ab3550_bank_open,
+ .write = ab3550_bank_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static const struct file_operations ab3550_address_fops = {
+ .open = ab3550_address_open,
+ .write = ab3550_address_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static const struct file_operations ab3550_val_fops = {
+ .open = ab3550_val_open,
+ .write = ab3550_val_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static struct dentry *ab3550_dir;
+static struct dentry *ab3550_reg_file;
+static struct dentry *ab3550_bank_file;
+static struct dentry *ab3550_address_file;
+static struct dentry *ab3550_val_file;
+
+static inline void ab3550_setup_debugfs(struct ab3550 *ab)
+{
+ ab->debug_bank = 0;
+ ab->debug_address = 0x00;
+
+ ab3550_dir = debugfs_create_dir(AB3550_NAME_STRING, NULL);
+ if (!ab3550_dir)
+ goto exit_no_debugfs;
+
+ ab3550_reg_file = debugfs_create_file("all-registers",
+ S_IRUGO, ab3550_dir, ab, &ab3550_registers_fops);
+ if (!ab3550_reg_file)
+ goto exit_destroy_dir;
+
+ ab3550_bank_file = debugfs_create_file("register-bank",
+ (S_IRUGO | S_IWUGO), ab3550_dir, ab, &ab3550_bank_fops);
+ if (!ab3550_bank_file)
+ goto exit_destroy_reg;
+
+ ab3550_address_file = debugfs_create_file("register-address",
+ (S_IRUGO | S_IWUGO), ab3550_dir, ab, &ab3550_address_fops);
+ if (!ab3550_address_file)
+ goto exit_destroy_bank;
+
+ ab3550_val_file = debugfs_create_file("register-value",
+ (S_IRUGO | S_IWUGO), ab3550_dir, ab, &ab3550_val_fops);
+ if (!ab3550_val_file)
+ goto exit_destroy_address;
+
+ return;
+
+exit_destroy_address:
+ debugfs_remove(ab3550_address_file);
+exit_destroy_bank:
+ debugfs_remove(ab3550_bank_file);
+exit_destroy_reg:
+ debugfs_remove(ab3550_reg_file);
+exit_destroy_dir:
+ debugfs_remove(ab3550_dir);
+exit_no_debugfs:
+ dev_err(&ab->i2c_client[0]->dev, "failed to create debugfs entries.\n");
+ return;
+}
+
+static inline void ab3550_remove_debugfs(void)
+{
+ debugfs_remove(ab3550_val_file);
+ debugfs_remove(ab3550_address_file);
+ debugfs_remove(ab3550_bank_file);
+ debugfs_remove(ab3550_reg_file);
+ debugfs_remove(ab3550_dir);
+}
+
+#else /* !CONFIG_DEBUG_FS */
+static inline void ab3550_setup_debugfs(struct ab3550 *ab)
+{
+}
+static inline void ab3550_remove_debugfs(void)
+{
+}
+#endif
+
+/*
+ * Basic set-up, datastructure creation/destruction and I2C interface.
+ * This sets up a default config in the AB3550 chip so that it
+ * will work as expected.
+ */
+static int __init ab3550_setup(struct ab3550 *ab)
+{
+ int err = 0;
+ int i;
+ struct ab3550_platform_data *plf_data;
+ struct abx500_init_settings *settings;
+
+ plf_data = ab->i2c_client[0]->dev.platform_data;
+ settings = plf_data->init_settings;
+
+ for (i = 0; i < plf_data->init_settings_sz; i++) {
+ err = mask_and_set_register_interruptible(ab,
+ settings[i].bank,
+ settings[i].reg,
+ 0xFF, settings[i].setting);
+ if (err)
+ goto exit_no_setup;
+
+ /* If event mask register update the event mask in ab3550 */
+ if ((settings[i].bank == 0) &&
+ (AB3550_IMR1 <= settings[i].reg) &&
+ (settings[i].reg <= AB3550_IMR5)) {
+ ab->event_mask[settings[i].reg - AB3550_IMR1] =
+ settings[i].setting;
+ }
+ }
+exit_no_setup:
+ return err;
+}
+
+static void ab3550_mask_work(struct work_struct *work)
+{
+ struct ab3550 *ab = container_of(work, struct ab3550, mask_work);
+ int i;
+ unsigned long flags;
+ u8 mask[AB3550_NUM_EVENT_REG];
+
+ spin_lock_irqsave(&ab->event_lock, flags);
+ for (i = 0; i < AB3550_NUM_EVENT_REG; i++)
+ mask[i] = ab->event_mask[i];
+ spin_unlock_irqrestore(&ab->event_lock, flags);
+
+ for (i = 0; i < AB3550_NUM_EVENT_REG; i++) {
+ int err;
+
+ err = mask_and_set_register_interruptible(ab, 0,
+ (AB3550_IMR1 + i), ~0, mask[i]);
+ if (err)
+ dev_err(&ab->i2c_client[0]->dev,
+ "ab3550_mask_work failed 0x%x,0x%x\n",
+ (AB3550_IMR1 + i), mask[i]);
+ }
+}
+
+static void ab3550_mask(unsigned int irq)
+{
+ unsigned long flags;
+ struct ab3550 *ab;
+ struct ab3550_platform_data *plf_data;
+
+ ab = get_irq_chip_data(irq);
+ plf_data = ab->i2c_client[0]->dev.platform_data;
+ irq -= plf_data->irq.base;
+
+ spin_lock_irqsave(&ab->event_lock, flags);
+ ab->event_mask[irq / 8] |= BIT(irq % 8);
+ spin_unlock_irqrestore(&ab->event_lock, flags);
+
+ schedule_work(&ab->mask_work);
+}
+
+static void ab3550_unmask(unsigned int irq)
+{
+ unsigned long flags;
+ struct ab3550 *ab;
+ struct ab3550_platform_data *plf_data;
+
+ ab = get_irq_chip_data(irq);
+ plf_data = ab->i2c_client[0]->dev.platform_data;
+ irq -= plf_data->irq.base;
+
+ spin_lock_irqsave(&ab->event_lock, flags);
+ ab->event_mask[irq / 8] &= ~BIT(irq % 8);
+ spin_unlock_irqrestore(&ab->event_lock, flags);
+
+ schedule_work(&ab->mask_work);
+}
+
+static void noop(unsigned int irq)
+{
+}
+
+static struct irq_chip ab3550_irq_chip = {
+ .name = "ab3550-core", /* Keep the same name as the request */
+ .startup = NULL, /* defaults to enable */
+ .shutdown = NULL, /* defaults to disable */
+ .enable = NULL, /* defaults to unmask */
+ .disable = ab3550_mask, /* No default to mask in chip.c */
+ .ack = noop,
+ .mask = ab3550_mask,
+ .unmask = ab3550_unmask,
+ .end = NULL,
+};
+
+struct ab_family_id {
+ u8 id;
+ char *name;
+};
+
+static const struct ab_family_id ids[] __initdata = {
+ /* AB3550 */
+ {
+ .id = AB3550_P1A,
+ .name = "P1A"
+ },
+ /* Terminator */
+ {
+ .id = 0x00,
+ }
+};
+
+static int __init ab3550_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ab3550 *ab;
+ struct ab3550_platform_data *ab3550_plf_data =
+ client->dev.platform_data;
+ int err;
+ int i;
+ int num_i2c_clients = 0;
+
+ ab = kzalloc(sizeof(struct ab3550), GFP_KERNEL);
+ if (!ab) {
+ dev_err(&client->dev,
+ "could not allocate " AB3550_NAME_STRING " device\n");
+ return -ENOMEM;
+ }
+
+ /* Initialize data structure */
+ mutex_init(&ab->access_mutex);
+ spin_lock_init(&ab->event_lock);
+ ab->i2c_client[0] = client;
+
+ i2c_set_clientdata(client, ab);
+
+ /* Read chip ID register */
+ err = get_register_interruptible(ab, 0, AB3550_CID_REG, &ab->chip_id);
+ if (err) {
+ dev_err(&client->dev, "could not communicate with the analog "
+ "baseband chip\n");
+ goto exit_no_detect;
+ }
+
+ for (i = 0; ids[i].id != 0x0; i++) {
+ if (ids[i].id == ab->chip_id) {
+ snprintf(&ab->chip_name[0], sizeof(ab->chip_name) - 1,
+ AB3550_ID_FORMAT_STRING, ids[i].name);
+ break;
+ }
+ }
+
+ if (ids[i].id == 0x0) {
+ dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n",
+ ab->chip_id);
+ dev_err(&client->dev, "driver not started!\n");
+ goto exit_no_detect;
+ }
+
+ dev_info(&client->dev, "detected AB chip: %s\n", &ab->chip_name[0]);
+
+ /* Attach other dummy I2C clients. */
+ while (++num_i2c_clients < AB3550_NUM_BANKS) {
+ ab->i2c_client[num_i2c_clients] =
+ i2c_new_dummy(client->adapter,
+ (client->addr + num_i2c_clients));
+ if (!ab->i2c_client[num_i2c_clients]) {
+ err = -ENOMEM;
+ goto exit_no_dummy_client;
+ }
+ strlcpy(ab->i2c_client[num_i2c_clients]->name, id->name,
+ sizeof(ab->i2c_client[num_i2c_clients]->name));
+ }
+
+ err = ab3550_setup(ab);
+ if (err)
+ goto exit_no_setup;
+
+ INIT_WORK(&ab->mask_work, ab3550_mask_work);
+
+ for (i = 0; i < ab3550_plf_data->irq.count; i++) {
+ unsigned int irq;
+
+ irq = ab3550_plf_data->irq.base + i;
+ set_irq_chip_data(irq, ab);
+ set_irq_chip_and_handler(irq, &ab3550_irq_chip,
+ handle_simple_irq);
+ set_irq_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ set_irq_noprobe(irq);
+#endif
+ }
+
+ err = request_threaded_irq(client->irq, NULL, ab3550_irq_handler,
+ IRQF_ONESHOT, "ab3550-core", ab);
+ /* This real unpredictable IRQ is of course sampled for entropy */
+ rand_initialize_irq(client->irq);
+
+ if (err)
+ goto exit_no_irq;
+
+ err = abx500_register_ops(&client->dev, &ab3550_ops);
+ if (err)
+ goto exit_no_ops;
+
+ /* Set up and register the platform devices. */
+ for (i = 0; i < AB3550_NUM_DEVICES; i++) {
+ ab3550_devs[i].platform_data = ab3550_plf_data->dev_data[i];
+ ab3550_devs[i].data_size = ab3550_plf_data->dev_data_sz[i];
+ }
+
+ err = mfd_add_devices(&client->dev, 0, ab3550_devs,
+ ARRAY_SIZE(ab3550_devs), NULL,
+ ab3550_plf_data->irq.base);
+
+ ab3550_setup_debugfs(ab);
+
+ return 0;
+
+exit_no_ops:
+exit_no_irq:
+exit_no_setup:
+exit_no_dummy_client:
+ /* Unregister the dummy i2c clients. */
+ while (--num_i2c_clients)
+ i2c_unregister_device(ab->i2c_client[num_i2c_clients]);
+exit_no_detect:
+ kfree(ab);
+ return err;
+}
+
+static int __exit ab3550_remove(struct i2c_client *client)
+{
+ struct ab3550 *ab = i2c_get_clientdata(client);
+ int num_i2c_clients = AB3550_NUM_BANKS;
+
+ mfd_remove_devices(&client->dev);
+ ab3550_remove_debugfs();
+
+ while (--num_i2c_clients)
+ i2c_unregister_device(ab->i2c_client[num_i2c_clients]);
+
+ /*
+ * At this point, all subscribers should have unregistered
+ * their notifiers so deactivate IRQ
+ */
+ free_irq(client->irq, ab);
+ kfree(ab);
+ return 0;
+}
+
+static const struct i2c_device_id ab3550_id[] = {
+ {AB3550_NAME_STRING, 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ab3550_id);
+
+static struct i2c_driver ab3550_driver = {
+ .driver = {
+ .name = AB3550_NAME_STRING,
+ .owner = THIS_MODULE,
+ },
+ .id_table = ab3550_id,
+ .probe = ab3550_probe,
+ .remove = __exit_p(ab3550_remove),
+};
+
+static int __init ab3550_i2c_init(void)
+{
+ return i2c_add_driver(&ab3550_driver);
+}
+
+static void __exit ab3550_i2c_exit(void)
+{
+ i2c_del_driver(&ab3550_driver);
+}
+
+subsys_initcall(ab3550_i2c_init);
+module_exit(ab3550_i2c_exit);
+
+MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
+MODULE_DESCRIPTION("AB3550 core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ab4500-core.c b/drivers/mfd/ab4500-core.c
deleted file mode 100644
index c275daa..0000000
--- a/drivers/mfd/ab4500-core.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson
- *
- * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
- *
- * This program is free software; you can redistribute it
- * and/or modify it under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation.
- *
- * AB4500 is a companion power management chip used with U8500.
- * On this platform, this is interfaced with SSP0 controller
- * which is a ARM primecell pl022.
- *
- * At the moment the module just exports read/write features.
- * Interrupt management to be added - TODO.
- */
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/ab4500.h>
-
-/* just required if probe fails, we need to
- * unregister the device
- */
-static struct spi_driver ab4500_driver;
-
-/*
- * This funtion writes to any AB4500 registers using
- * SPI protocol & before it writes it packs the data
- * in the below 24 bit frame format
- *
- * *|------------------------------------|
- * *| 23|22...18|17.......10|9|8|7......0|
- * *| r/w bank adr data |
- * * ------------------------------------
- *
- * This function shouldn't be called from interrupt
- * context
- */
-int ab4500_write(struct ab4500 *ab4500, unsigned char block,
- unsigned long addr, unsigned char data)
-{
- struct spi_transfer xfer;
- struct spi_message msg;
- int err;
- unsigned long spi_data =
- block << 18 | addr << 10 | data;
-
- mutex_lock(&ab4500->lock);
- ab4500->tx_buf[0] = spi_data;
- ab4500->rx_buf[0] = 0;
-
- xfer.tx_buf = ab4500->tx_buf;
- xfer.rx_buf = NULL;
- xfer.len = sizeof(unsigned long);
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfer, &msg);
-
- err = spi_sync(ab4500->spi, &msg);
- mutex_unlock(&ab4500->lock);
-
- return err;
-}
-EXPORT_SYMBOL(ab4500_write);
-
-int ab4500_read(struct ab4500 *ab4500, unsigned char block,
- unsigned long addr)
-{
- struct spi_transfer xfer;
- struct spi_message msg;
- unsigned long spi_data =
- 1 << 23 | block << 18 | addr << 10;
-
- mutex_lock(&ab4500->lock);
- ab4500->tx_buf[0] = spi_data;
- ab4500->rx_buf[0] = 0;
-
- xfer.tx_buf = ab4500->tx_buf;
- xfer.rx_buf = ab4500->rx_buf;
- xfer.len = sizeof(unsigned long);
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfer, &msg);
-
- spi_sync(ab4500->spi, &msg);
- mutex_unlock(&ab4500->lock);
-
- return ab4500->rx_buf[0];
-}
-EXPORT_SYMBOL(ab4500_read);
-
-/* ref: ab3100 core */
-#define AB4500_DEVICE(devname, devid) \
-static struct platform_device ab4500_##devname##_device = { \
- .name = devid, \
- .id = -1, \
-}
-
-/* list of childern devices of ab4500 - all are
- * not populated here - TODO
- */
-AB4500_DEVICE(charger, "ab4500-charger");
-AB4500_DEVICE(audio, "ab4500-audio");
-AB4500_DEVICE(usb, "ab4500-usb");
-AB4500_DEVICE(tvout, "ab4500-tvout");
-AB4500_DEVICE(sim, "ab4500-sim");
-AB4500_DEVICE(gpadc, "ab4500-gpadc");
-AB4500_DEVICE(clkmgt, "ab4500-clkmgt");
-AB4500_DEVICE(misc, "ab4500-misc");
-
-static struct platform_device *ab4500_platform_devs[] = {
- &ab4500_charger_device,
- &ab4500_audio_device,
- &ab4500_usb_device,
- &ab4500_tvout_device,
- &ab4500_sim_device,
- &ab4500_gpadc_device,
- &ab4500_clkmgt_device,
- &ab4500_misc_device,
-};
-
-static int __init ab4500_probe(struct spi_device *spi)
-{
- struct ab4500 *ab4500;
- unsigned char revision;
- int err = 0;
- int i;
-
- ab4500 = kzalloc(sizeof *ab4500, GFP_KERNEL);
- if (!ab4500) {
- dev_err(&spi->dev, "could not allocate AB4500\n");
- err = -ENOMEM;
- goto not_detect;
- }
-
- ab4500->spi = spi;
- spi_set_drvdata(spi, ab4500);
-
- mutex_init(&ab4500->lock);
-
- /* read the revision register */
- revision = ab4500_read(ab4500, AB4500_MISC, AB4500_REV_REG);
-
- /* revision id 0x0 is for early drop, 0x10 is for cut1.0 */
- if (revision == 0x0 || revision == 0x10)
- dev_info(&spi->dev, "Detected chip: %s, revision = %x\n",
- ab4500_driver.driver.name, revision);
- else {
- dev_err(&spi->dev, "unknown chip: 0x%x\n", revision);
- goto not_detect;
- }
-
- for (i = 0; i < ARRAY_SIZE(ab4500_platform_devs); i++) {
- ab4500_platform_devs[i]->dev.parent =
- &spi->dev;
- platform_set_drvdata(ab4500_platform_devs[i], ab4500);
- }
-
- /* register the ab4500 platform devices */
- platform_add_devices(ab4500_platform_devs,
- ARRAY_SIZE(ab4500_platform_devs));
-
- return err;
-
- not_detect:
- spi_unregister_driver(&ab4500_driver);
- kfree(ab4500);
- return err;
-}
-
-static int __devexit ab4500_remove(struct spi_device *spi)
-{
- struct ab4500 *ab4500 =
- spi_get_drvdata(spi);
-
- kfree(ab4500);
-
- return 0;
-}
-
-static struct spi_driver ab4500_driver = {
- .driver = {
- .name = "ab4500",
- .owner = THIS_MODULE,
- },
- .probe = ab4500_probe,
- .remove = __devexit_p(ab4500_remove)
-};
-
-static int __devinit ab4500_init(void)
-{
- return spi_register_driver(&ab4500_driver);
-}
-
-static void __exit ab4500_exit(void)
-{
- spi_unregister_driver(&ab4500_driver);
-}
-
-subsys_initcall(ab4500_init);
-module_exit(ab4500_exit);
-
-MODULE_AUTHOR("Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com");
-MODULE_DESCRIPTION("AB4500 core driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
new file mode 100644
index 0000000..f3d26fa
--- /dev/null
+++ b/drivers/mfd/ab8500-core.c
@@ -0,0 +1,444 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ab8500.h>
+
+/*
+ * Interrupt register offsets
+ * Bank : 0x0E
+ */
+#define AB8500_IT_SOURCE1_REG 0x0E00
+#define AB8500_IT_SOURCE2_REG 0x0E01
+#define AB8500_IT_SOURCE3_REG 0x0E02
+#define AB8500_IT_SOURCE4_REG 0x0E03
+#define AB8500_IT_SOURCE5_REG 0x0E04
+#define AB8500_IT_SOURCE6_REG 0x0E05
+#define AB8500_IT_SOURCE7_REG 0x0E06
+#define AB8500_IT_SOURCE8_REG 0x0E07
+#define AB8500_IT_SOURCE19_REG 0x0E12
+#define AB8500_IT_SOURCE20_REG 0x0E13
+#define AB8500_IT_SOURCE21_REG 0x0E14
+#define AB8500_IT_SOURCE22_REG 0x0E15
+#define AB8500_IT_SOURCE23_REG 0x0E16
+#define AB8500_IT_SOURCE24_REG 0x0E17
+
+/*
+ * latch registers
+ */
+#define AB8500_IT_LATCH1_REG 0x0E20
+#define AB8500_IT_LATCH2_REG 0x0E21
+#define AB8500_IT_LATCH3_REG 0x0E22
+#define AB8500_IT_LATCH4_REG 0x0E23
+#define AB8500_IT_LATCH5_REG 0x0E24
+#define AB8500_IT_LATCH6_REG 0x0E25
+#define AB8500_IT_LATCH7_REG 0x0E26
+#define AB8500_IT_LATCH8_REG 0x0E27
+#define AB8500_IT_LATCH9_REG 0x0E28
+#define AB8500_IT_LATCH10_REG 0x0E29
+#define AB8500_IT_LATCH19_REG 0x0E32
+#define AB8500_IT_LATCH20_REG 0x0E33
+#define AB8500_IT_LATCH21_REG 0x0E34
+#define AB8500_IT_LATCH22_REG 0x0E35
+#define AB8500_IT_LATCH23_REG 0x0E36
+#define AB8500_IT_LATCH24_REG 0x0E37
+
+/*
+ * mask registers
+ */
+
+#define AB8500_IT_MASK1_REG 0x0E40
+#define AB8500_IT_MASK2_REG 0x0E41
+#define AB8500_IT_MASK3_REG 0x0E42
+#define AB8500_IT_MASK4_REG 0x0E43
+#define AB8500_IT_MASK5_REG 0x0E44
+#define AB8500_IT_MASK6_REG 0x0E45
+#define AB8500_IT_MASK7_REG 0x0E46
+#define AB8500_IT_MASK8_REG 0x0E47
+#define AB8500_IT_MASK9_REG 0x0E48
+#define AB8500_IT_MASK10_REG 0x0E49
+#define AB8500_IT_MASK11_REG 0x0E4A
+#define AB8500_IT_MASK12_REG 0x0E4B
+#define AB8500_IT_MASK13_REG 0x0E4C
+#define AB8500_IT_MASK14_REG 0x0E4D
+#define AB8500_IT_MASK15_REG 0x0E4E
+#define AB8500_IT_MASK16_REG 0x0E4F
+#define AB8500_IT_MASK17_REG 0x0E50
+#define AB8500_IT_MASK18_REG 0x0E51
+#define AB8500_IT_MASK19_REG 0x0E52
+#define AB8500_IT_MASK20_REG 0x0E53
+#define AB8500_IT_MASK21_REG 0x0E54
+#define AB8500_IT_MASK22_REG 0x0E55
+#define AB8500_IT_MASK23_REG 0x0E56
+#define AB8500_IT_MASK24_REG 0x0E57
+
+#define AB8500_REV_REG 0x1080
+
+/*
+ * Map interrupt numbers to the LATCH and MASK register offsets, Interrupt
+ * numbers are indexed into this array with (num / 8).
+ *
+ * This is one off from the register names, i.e. AB8500_IT_MASK1_REG is at
+ * offset 0.
+ */
+static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = {
+ 0, 1, 2, 3, 4, 6, 7, 8, 9, 18, 19, 20, 21,
+};
+
+static int __ab8500_write(struct ab8500 *ab8500, u16 addr, u8 data)
+{
+ int ret;
+
+ dev_vdbg(ab8500->dev, "wr: addr %#x <= %#x\n", addr, data);
+
+ ret = ab8500->write(ab8500, addr, data);
+ if (ret < 0)
+ dev_err(ab8500->dev, "failed to write reg %#x: %d\n",
+ addr, ret);
+
+ return ret;
+}
+
+/**
+ * ab8500_write() - write an AB8500 register
+ * @ab8500: device to write to
+ * @addr: address of the register
+ * @data: value to write
+ */
+int ab8500_write(struct ab8500 *ab8500, u16 addr, u8 data)
+{
+ int ret;
+
+ mutex_lock(&ab8500->lock);
+ ret = __ab8500_write(ab8500, addr, data);
+ mutex_unlock(&ab8500->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ab8500_write);
+
+static int __ab8500_read(struct ab8500 *ab8500, u16 addr)
+{
+ int ret;
+
+ ret = ab8500->read(ab8500, addr);
+ if (ret < 0)
+ dev_err(ab8500->dev, "failed to read reg %#x: %d\n",
+ addr, ret);
+
+ dev_vdbg(ab8500->dev, "rd: addr %#x => data %#x\n", addr, ret);
+
+ return ret;
+}
+
+/**
+ * ab8500_read() - read an AB8500 register
+ * @ab8500: device to read from
+ * @addr: address of the register
+ */
+int ab8500_read(struct ab8500 *ab8500, u16 addr)
+{
+ int ret;
+
+ mutex_lock(&ab8500->lock);
+ ret = __ab8500_read(ab8500, addr);
+ mutex_unlock(&ab8500->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ab8500_read);
+
+/**
+ * ab8500_set_bits() - set a bitfield in an AB8500 register
+ * @ab8500: device to read from
+ * @addr: address of the register
+ * @mask: mask of the bitfield to modify
+ * @data: value to set to the bitfield
+ */
+int ab8500_set_bits(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data)
+{
+ int ret;
+
+ mutex_lock(&ab8500->lock);
+
+ ret = __ab8500_read(ab8500, addr);
+ if (ret < 0)
+ goto out;
+
+ ret &= ~mask;
+ ret |= data;
+
+ ret = __ab8500_write(ab8500, addr, ret);
+
+out:
+ mutex_unlock(&ab8500->lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ab8500_set_bits);
+
+static void ab8500_irq_lock(unsigned int irq)
+{
+ struct ab8500 *ab8500 = get_irq_chip_data(irq);
+
+ mutex_lock(&ab8500->irq_lock);
+}
+
+static void ab8500_irq_sync_unlock(unsigned int irq)
+{
+ struct ab8500 *ab8500 = get_irq_chip_data(irq);
+ int i;
+
+ for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) {
+ u8 old = ab8500->oldmask[i];
+ u8 new = ab8500->mask[i];
+ int reg;
+
+ if (new == old)
+ continue;
+
+ ab8500->oldmask[i] = new;
+
+ reg = AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i];
+ ab8500_write(ab8500, reg, new);
+ }
+
+ mutex_unlock(&ab8500->irq_lock);
+}
+
+static void ab8500_irq_mask(unsigned int irq)
+{
+ struct ab8500 *ab8500 = get_irq_chip_data(irq);
+ int offset = irq - ab8500->irq_base;
+ int index = offset / 8;
+ int mask = 1 << (offset % 8);
+
+ ab8500->mask[index] |= mask;
+}
+
+static void ab8500_irq_unmask(unsigned int irq)
+{
+ struct ab8500 *ab8500 = get_irq_chip_data(irq);
+ int offset = irq - ab8500->irq_base;
+ int index = offset / 8;
+ int mask = 1 << (offset % 8);
+
+ ab8500->mask[index] &= ~mask;
+}
+
+static struct irq_chip ab8500_irq_chip = {
+ .name = "ab8500",
+ .bus_lock = ab8500_irq_lock,
+ .bus_sync_unlock = ab8500_irq_sync_unlock,
+ .mask = ab8500_irq_mask,
+ .unmask = ab8500_irq_unmask,
+};
+
+static irqreturn_t ab8500_irq(int irq, void *dev)
+{
+ struct ab8500 *ab8500 = dev;
+ int i;
+
+ dev_vdbg(ab8500->dev, "interrupt\n");
+
+ for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) {
+ int regoffset = ab8500_irq_regoffset[i];
+ int status;
+
+ status = ab8500_read(ab8500, AB8500_IT_LATCH1_REG + regoffset);
+ if (status <= 0)
+ continue;
+
+ do {
+ int bit = __ffs(status);
+ int line = i * 8 + bit;
+
+ handle_nested_irq(ab8500->irq_base + line);
+ status &= ~(1 << bit);
+ } while (status);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int ab8500_irq_init(struct ab8500 *ab8500)
+{
+ int base = ab8500->irq_base;
+ int irq;
+
+ for (irq = base; irq < base + AB8500_NR_IRQS; irq++) {
+ set_irq_chip_data(irq, ab8500);
+ set_irq_chip_and_handler(irq, &ab8500_irq_chip,
+ handle_simple_irq);
+ set_irq_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ set_irq_noprobe(irq);
+#endif
+ }
+
+ return 0;
+}
+
+static void ab8500_irq_remove(struct ab8500 *ab8500)
+{
+ int base = ab8500->irq_base;
+ int irq;
+
+ for (irq = base; irq < base + AB8500_NR_IRQS; irq++) {
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, 0);
+#endif
+ set_irq_chip_and_handler(irq, NULL, NULL);
+ set_irq_chip_data(irq, NULL);
+ }
+}
+
+static struct resource ab8500_gpadc_resources[] = {
+ {
+ .name = "HW_CONV_END",
+ .start = AB8500_INT_GP_HW_ADC_CONV_END,
+ .end = AB8500_INT_GP_HW_ADC_CONV_END,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "SW_CONV_END",
+ .start = AB8500_INT_GP_SW_ADC_CONV_END,
+ .end = AB8500_INT_GP_SW_ADC_CONV_END,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource ab8500_rtc_resources[] = {
+ {
+ .name = "60S",
+ .start = AB8500_INT_RTC_60S,
+ .end = AB8500_INT_RTC_60S,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "ALARM",
+ .start = AB8500_INT_RTC_ALARM,
+ .end = AB8500_INT_RTC_ALARM,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell ab8500_devs[] = {
+ {
+ .name = "ab8500-gpadc",
+ .num_resources = ARRAY_SIZE(ab8500_gpadc_resources),
+ .resources = ab8500_gpadc_resources,
+ },
+ {
+ .name = "ab8500-rtc",
+ .num_resources = ARRAY_SIZE(ab8500_rtc_resources),
+ .resources = ab8500_rtc_resources,
+ },
+ { .name = "ab8500-charger", },
+ { .name = "ab8500-audio", },
+ { .name = "ab8500-usb", },
+ { .name = "ab8500-pwm", },
+};
+
+int __devinit ab8500_init(struct ab8500 *ab8500)
+{
+ struct ab8500_platform_data *plat = dev_get_platdata(ab8500->dev);
+ int ret;
+ int i;
+
+ if (plat)
+ ab8500->irq_base = plat->irq_base;
+
+ mutex_init(&ab8500->lock);
+ mutex_init(&ab8500->irq_lock);
+
+ ret = ab8500_read(ab8500, AB8500_REV_REG);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * 0x0 - Early Drop
+ * 0x10 - Cut 1.0
+ * 0x11 - Cut 1.1
+ */
+ if (ret == 0x0 || ret == 0x10 || ret == 0x11) {
+ ab8500->revision = ret;
+ dev_info(ab8500->dev, "detected chip, revision: %#x\n", ret);
+ } else {
+ dev_err(ab8500->dev, "unknown chip, revision: %#x\n", ret);
+ return -EINVAL;
+ }
+
+ if (plat && plat->init)
+ plat->init(ab8500);
+
+ /* Clear and mask all interrupts */
+ for (i = 0; i < 10; i++) {
+ ab8500_read(ab8500, AB8500_IT_LATCH1_REG + i);
+ ab8500_write(ab8500, AB8500_IT_MASK1_REG + i, 0xff);
+ }
+
+ for (i = 18; i < 24; i++) {
+ ab8500_read(ab8500, AB8500_IT_LATCH1_REG + i);
+ ab8500_write(ab8500, AB8500_IT_MASK1_REG + i, 0xff);
+ }
+
+ for (i = 0; i < AB8500_NUM_IRQ_REGS; i++)
+ ab8500->mask[i] = ab8500->oldmask[i] = 0xff;
+
+ if (ab8500->irq_base) {
+ ret = ab8500_irq_init(ab8500);
+ if (ret)
+ return ret;
+
+ ret = request_threaded_irq(ab8500->irq, NULL, ab8500_irq,
+ IRQF_ONESHOT, "ab8500", ab8500);
+ if (ret)
+ goto out_removeirq;
+ }
+
+ ret = mfd_add_devices(ab8500->dev, -1, ab8500_devs,
+ ARRAY_SIZE(ab8500_devs), NULL,
+ ab8500->irq_base);
+ if (ret)
+ goto out_freeirq;
+
+ return ret;
+
+out_freeirq:
+ if (ab8500->irq_base) {
+ free_irq(ab8500->irq, ab8500);
+out_removeirq:
+ ab8500_irq_remove(ab8500);
+ }
+ return ret;
+}
+
+int __devexit ab8500_exit(struct ab8500 *ab8500)
+{
+ mfd_remove_devices(ab8500->dev);
+ if (ab8500->irq_base) {
+ free_irq(ab8500->irq, ab8500);
+ ab8500_irq_remove(ab8500);
+ }
+
+ return 0;
+}
+
+MODULE_AUTHOR("Srinidhi Kasagar, Rabin Vincent");
+MODULE_DESCRIPTION("AB8500 MFD core");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/ab8500-spi.c b/drivers/mfd/ab8500-spi.c
new file mode 100644
index 0000000..b81d4f7
--- /dev/null
+++ b/drivers/mfd/ab8500-spi.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/ab8500.h>
+
+/*
+ * This funtion writes to any AB8500 registers using
+ * SPI protocol & before it writes it packs the data
+ * in the below 24 bit frame format
+ *
+ * *|------------------------------------|
+ * *| 23|22...18|17.......10|9|8|7......0|
+ * *| r/w bank adr data |
+ * * ------------------------------------
+ *
+ * This function shouldn't be called from interrupt
+ * context
+ */
+static int ab8500_spi_write(struct ab8500 *ab8500, u16 addr, u8 data)
+{
+ struct spi_device *spi = container_of(ab8500->dev, struct spi_device,
+ dev);
+ unsigned long spi_data = addr << 10 | data;
+ struct spi_transfer xfer;
+ struct spi_message msg;
+
+ ab8500->tx_buf[0] = spi_data;
+ ab8500->rx_buf[0] = 0;
+
+ xfer.tx_buf = ab8500->tx_buf;
+ xfer.rx_buf = NULL;
+ xfer.len = sizeof(unsigned long);
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfer, &msg);
+
+ return spi_sync(spi, &msg);
+}
+
+static int ab8500_spi_read(struct ab8500 *ab8500, u16 addr)
+{
+ struct spi_device *spi = container_of(ab8500->dev, struct spi_device,
+ dev);
+ unsigned long spi_data = 1 << 23 | addr << 10;
+ struct spi_transfer xfer;
+ struct spi_message msg;
+ int ret;
+
+ ab8500->tx_buf[0] = spi_data;
+ ab8500->rx_buf[0] = 0;
+
+ xfer.tx_buf = ab8500->tx_buf;
+ xfer.rx_buf = ab8500->rx_buf;
+ xfer.len = sizeof(unsigned long);
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfer, &msg);
+
+ ret = spi_sync(spi, &msg);
+ if (!ret)
+ ret = ab8500->rx_buf[0];
+
+ return ret;
+}
+
+static int __devinit ab8500_spi_probe(struct spi_device *spi)
+{
+ struct ab8500 *ab8500;
+ int ret;
+
+ ab8500 = kzalloc(sizeof *ab8500, GFP_KERNEL);
+ if (!ab8500)
+ return -ENOMEM;
+
+ ab8500->dev = &spi->dev;
+ ab8500->irq = spi->irq;
+
+ ab8500->read = ab8500_spi_read;
+ ab8500->write = ab8500_spi_write;
+
+ spi_set_drvdata(spi, ab8500);
+
+ ret = ab8500_init(ab8500);
+ if (ret)
+ kfree(ab8500);
+
+ return ret;
+}
+
+static int __devexit ab8500_spi_remove(struct spi_device *spi)
+{
+ struct ab8500 *ab8500 = spi_get_drvdata(spi);
+
+ ab8500_exit(ab8500);
+ kfree(ab8500);
+
+ return 0;
+}
+
+static struct spi_driver ab8500_spi_driver = {
+ .driver = {
+ .name = "ab8500",
+ .owner = THIS_MODULE,
+ },
+ .probe = ab8500_spi_probe,
+ .remove = __devexit_p(ab8500_spi_remove)
+};
+
+static int __init ab8500_spi_init(void)
+{
+ return spi_register_driver(&ab8500_spi_driver);
+}
+subsys_initcall(ab8500_spi_init);
+
+static void __exit ab8500_spi_exit(void)
+{
+ spi_unregister_driver(&ab8500_spi_driver);
+}
+module_exit(ab8500_spi_exit);
+
+MODULE_AUTHOR("Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com");
+MODULE_DESCRIPTION("AB8500 SPI");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/abx500-core.c b/drivers/mfd/abx500-core.c
new file mode 100644
index 0000000..3b3b97e
--- /dev/null
+++ b/drivers/mfd/abx500-core.c
@@ -0,0 +1,157 @@
+/*
+ * Copyright (C) 2007-2010 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Register access functions for the ABX500 Mixed Signal IC family.
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com>
+ */
+
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/mfd/abx500.h>
+
+static LIST_HEAD(abx500_list);
+
+struct abx500_device_entry {
+ struct list_head list;
+ struct abx500_ops ops;
+ struct device *dev;
+};
+
+static void lookup_ops(struct device *dev, struct abx500_ops **ops)
+{
+ struct abx500_device_entry *dev_entry;
+
+ *ops = NULL;
+ list_for_each_entry(dev_entry, &abx500_list, list) {
+ if (dev_entry->dev == dev) {
+ *ops = &dev_entry->ops;
+ return;
+ }
+ }
+}
+
+int abx500_register_ops(struct device *dev, struct abx500_ops *ops)
+{
+ struct abx500_device_entry *dev_entry;
+
+ dev_entry = kzalloc(sizeof(struct abx500_device_entry), GFP_KERNEL);
+ if (IS_ERR(dev_entry)) {
+ dev_err(dev, "register_ops kzalloc failed");
+ return -ENOMEM;
+ }
+ dev_entry->dev = dev;
+ memcpy(&dev_entry->ops, ops, sizeof(struct abx500_ops));
+
+ list_add_tail(&dev_entry->list, &abx500_list);
+ return 0;
+}
+EXPORT_SYMBOL(abx500_register_ops);
+
+void abx500_remove_ops(struct device *dev)
+{
+ struct abx500_device_entry *dev_entry, *tmp;
+
+ list_for_each_entry_safe(dev_entry, tmp, &abx500_list, list)
+ {
+ if (dev_entry->dev == dev) {
+ list_del(&dev_entry->list);
+ kfree(dev_entry);
+ }
+ }
+}
+EXPORT_SYMBOL(abx500_remove_ops);
+
+int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
+ u8 value)
+{
+ struct abx500_ops *ops;
+
+ lookup_ops(dev->parent, &ops);
+ if ((ops != NULL) && (ops->set_register != NULL))
+ return ops->set_register(dev, bank, reg, value);
+ else
+ return -ENOTSUPP;
+}
+EXPORT_SYMBOL(abx500_set_register_interruptible);
+
+int abx500_get_register_interruptible(struct device *dev, u8 bank, u8 reg,
+ u8 *value)
+{
+ struct abx500_ops *ops;
+
+ lookup_ops(dev->parent, &ops);
+ if ((ops != NULL) && (ops->get_register != NULL))
+ return ops->get_register(dev, bank, reg, value);
+ else
+ return -ENOTSUPP;
+}
+EXPORT_SYMBOL(abx500_get_register_interruptible);
+
+int abx500_get_register_page_interruptible(struct device *dev, u8 bank,
+ u8 first_reg, u8 *regvals, u8 numregs)
+{
+ struct abx500_ops *ops;
+
+ lookup_ops(dev->parent, &ops);
+ if ((ops != NULL) && (ops->get_register_page != NULL))
+ return ops->get_register_page(dev, bank,
+ first_reg, regvals, numregs);
+ else
+ return -ENOTSUPP;
+}
+EXPORT_SYMBOL(abx500_get_register_page_interruptible);
+
+int abx500_mask_and_set_register_interruptible(struct device *dev, u8 bank,
+ u8 reg, u8 bitmask, u8 bitvalues)
+{
+ struct abx500_ops *ops;
+
+ lookup_ops(dev->parent, &ops);
+ if ((ops != NULL) && (ops->mask_and_set_register != NULL))
+ return ops->mask_and_set_register(dev, bank,
+ reg, bitmask, bitvalues);
+ else
+ return -ENOTSUPP;
+}
+EXPORT_SYMBOL(abx500_mask_and_set_register_interruptible);
+
+int abx500_get_chip_id(struct device *dev)
+{
+ struct abx500_ops *ops;
+
+ lookup_ops(dev->parent, &ops);
+ if ((ops != NULL) && (ops->get_chip_id != NULL))
+ return ops->get_chip_id(dev);
+ else
+ return -ENOTSUPP;
+}
+EXPORT_SYMBOL(abx500_get_chip_id);
+
+int abx500_event_registers_startup_state_get(struct device *dev, u8 *event)
+{
+ struct abx500_ops *ops;
+
+ lookup_ops(dev->parent, &ops);
+ if ((ops != NULL) && (ops->event_registers_startup_state_get != NULL))
+ return ops->event_registers_startup_state_get(dev, event);
+ else
+ return -ENOTSUPP;
+}
+EXPORT_SYMBOL(abx500_event_registers_startup_state_get);
+
+int abx500_startup_irq_enabled(struct device *dev, unsigned int irq)
+{
+ struct abx500_ops *ops;
+
+ lookup_ops(dev->parent, &ops);
+ if ((ops != NULL) && (ops->startup_irq_enabled != NULL))
+ return ops->startup_irq_enabled(dev, irq);
+ else
+ return -ENOTSUPP;
+}
+EXPORT_SYMBOL(abx500_startup_irq_enabled);
+
+MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
+MODULE_DESCRIPTION("ABX500 core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/adp5520.c b/drivers/mfd/adp5520.c
index 0055328..3122139 100644
--- a/drivers/mfd/adp5520.c
+++ b/drivers/mfd/adp5520.c
@@ -302,7 +302,6 @@
free_irq(chip->irq, chip);
out_free_chip:
- i2c_set_clientdata(client, NULL);
kfree(chip);
return ret;
@@ -317,7 +316,6 @@
adp5520_remove_subdevs(chip);
adp5520_write(chip->dev, ADP5520_MODE_STATUS, 0);
- i2c_set_clientdata(client, NULL);
kfree(chip);
return 0;
}
diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c
index 67181b1..c07aece 100644
--- a/drivers/mfd/da903x.c
+++ b/drivers/mfd/da903x.c
@@ -534,7 +534,6 @@
out_free_irq:
free_irq(client->irq, chip);
out_free_chip:
- i2c_set_clientdata(client, NULL);
kfree(chip);
return ret;
}
diff --git a/drivers/mfd/janz-cmodio.c b/drivers/mfd/janz-cmodio.c
new file mode 100644
index 0000000..9ed6307
--- /dev/null
+++ b/drivers/mfd/janz-cmodio.c
@@ -0,0 +1,304 @@
+/*
+ * Janz CMOD-IO MODULbus Carrier Board PCI Driver
+ *
+ * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * Lots of inspiration and code was copied from drivers/mfd/sm501.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+
+#include <linux/mfd/janz.h>
+
+#define DRV_NAME "janz-cmodio"
+
+/* Size of each MODULbus module in PCI BAR4 */
+#define CMODIO_MODULBUS_SIZE 0x200
+
+/* Maximum number of MODULbus modules on a CMOD-IO carrier board */
+#define CMODIO_MAX_MODULES 4
+
+/* Module Parameters */
+static unsigned int num_modules = CMODIO_MAX_MODULES;
+static unsigned char *modules[CMODIO_MAX_MODULES] = {
+ "empty", "empty", "empty", "empty",
+};
+
+module_param_array(modules, charp, &num_modules, S_IRUGO);
+MODULE_PARM_DESC(modules, "MODULbus modules attached to the carrier board");
+
+/* Unique Device Id */
+static unsigned int cmodio_id;
+
+struct cmodio_device {
+ /* Parent PCI device */
+ struct pci_dev *pdev;
+
+ /* PLX control registers */
+ struct janz_cmodio_onboard_regs __iomem *ctrl;
+
+ /* hex switch position */
+ u8 hex;
+
+ /* mfd-core API */
+ struct mfd_cell cells[CMODIO_MAX_MODULES];
+ struct resource resources[3 * CMODIO_MAX_MODULES];
+ struct janz_platform_data pdata[CMODIO_MAX_MODULES];
+};
+
+/*
+ * Subdevices using the mfd-core API
+ */
+
+static int __devinit cmodio_setup_subdevice(struct cmodio_device *priv,
+ char *name, unsigned int devno,
+ unsigned int modno)
+{
+ struct janz_platform_data *pdata;
+ struct mfd_cell *cell;
+ struct resource *res;
+ struct pci_dev *pci;
+
+ pci = priv->pdev;
+ cell = &priv->cells[devno];
+ res = &priv->resources[devno * 3];
+ pdata = &priv->pdata[devno];
+
+ cell->name = name;
+ cell->resources = res;
+ cell->num_resources = 3;
+
+ /* Setup the subdevice ID -- must be unique */
+ cell->id = cmodio_id++;
+
+ /* Add platform data */
+ pdata->modno = modno;
+ cell->platform_data = pdata;
+ cell->data_size = sizeof(*pdata);
+
+ /* MODULbus registers -- PCI BAR3 is big-endian MODULbus access */
+ res->flags = IORESOURCE_MEM;
+ res->parent = &pci->resource[3];
+ res->start = pci->resource[3].start + (CMODIO_MODULBUS_SIZE * modno);
+ res->end = res->start + CMODIO_MODULBUS_SIZE - 1;
+ res++;
+
+ /* PLX Control Registers -- PCI BAR4 is interrupt and other registers */
+ res->flags = IORESOURCE_MEM;
+ res->parent = &pci->resource[4];
+ res->start = pci->resource[4].start;
+ res->end = pci->resource[4].end;
+ res++;
+
+ /*
+ * IRQ
+ *
+ * The start and end fields are used as an offset to the irq_base
+ * parameter passed into the mfd_add_devices() function call. All
+ * devices share the same IRQ.
+ */
+ res->flags = IORESOURCE_IRQ;
+ res->parent = NULL;
+ res->start = 0;
+ res->end = 0;
+ res++;
+
+ return 0;
+}
+
+/* Probe each submodule using kernel parameters */
+static int __devinit cmodio_probe_submodules(struct cmodio_device *priv)
+{
+ struct pci_dev *pdev = priv->pdev;
+ unsigned int num_probed = 0;
+ char *name;
+ int i;
+
+ for (i = 0; i < num_modules; i++) {
+ name = modules[i];
+ if (!strcmp(name, "") || !strcmp(name, "empty"))
+ continue;
+
+ dev_dbg(&priv->pdev->dev, "MODULbus %d: name %s\n", i, name);
+ cmodio_setup_subdevice(priv, name, num_probed, i);
+ num_probed++;
+ }
+
+ /* print an error message if no modules were probed */
+ if (num_probed == 0) {
+ dev_err(&priv->pdev->dev, "no MODULbus modules specified, "
+ "please set the ``modules'' kernel "
+ "parameter according to your "
+ "hardware configuration\n");
+ return -ENODEV;
+ }
+
+ return mfd_add_devices(&pdev->dev, 0, priv->cells,
+ num_probed, NULL, pdev->irq);
+}
+
+/*
+ * SYSFS Attributes
+ */
+
+static ssize_t mbus_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct cmodio_device *priv = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%x\n", priv->hex);
+}
+
+static DEVICE_ATTR(modulbus_number, S_IRUGO, mbus_show, NULL);
+
+static struct attribute *cmodio_sysfs_attrs[] = {
+ &dev_attr_modulbus_number.attr,
+ NULL,
+};
+
+static const struct attribute_group cmodio_sysfs_attr_group = {
+ .attrs = cmodio_sysfs_attrs,
+};
+
+/*
+ * PCI Driver
+ */
+
+static int __devinit cmodio_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ struct cmodio_device *priv;
+ int ret;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(&dev->dev, "unable to allocate private data\n");
+ ret = -ENOMEM;
+ goto out_return;
+ }
+
+ pci_set_drvdata(dev, priv);
+ priv->pdev = dev;
+
+ /* Hardware Initialization */
+ ret = pci_enable_device(dev);
+ if (ret) {
+ dev_err(&dev->dev, "unable to enable device\n");
+ goto out_free_priv;
+ }
+
+ pci_set_master(dev);
+ ret = pci_request_regions(dev, DRV_NAME);
+ if (ret) {
+ dev_err(&dev->dev, "unable to request regions\n");
+ goto out_pci_disable_device;
+ }
+
+ /* Onboard configuration registers */
+ priv->ctrl = pci_ioremap_bar(dev, 4);
+ if (!priv->ctrl) {
+ dev_err(&dev->dev, "unable to remap onboard regs\n");
+ ret = -ENOMEM;
+ goto out_pci_release_regions;
+ }
+
+ /* Read the hex switch on the carrier board */
+ priv->hex = ioread8(&priv->ctrl->int_enable);
+
+ /* Add the MODULbus number (hex switch value) to the device's sysfs */
+ ret = sysfs_create_group(&dev->dev.kobj, &cmodio_sysfs_attr_group);
+ if (ret) {
+ dev_err(&dev->dev, "unable to create sysfs attributes\n");
+ goto out_unmap_ctrl;
+ }
+
+ /*
+ * Disable all interrupt lines, each submodule will enable its
+ * own interrupt line if needed
+ */
+ iowrite8(0xf, &priv->ctrl->int_disable);
+
+ /* Register drivers for all submodules */
+ ret = cmodio_probe_submodules(priv);
+ if (ret) {
+ dev_err(&dev->dev, "unable to probe submodules\n");
+ goto out_sysfs_remove_group;
+ }
+
+ return 0;
+
+out_sysfs_remove_group:
+ sysfs_remove_group(&dev->dev.kobj, &cmodio_sysfs_attr_group);
+out_unmap_ctrl:
+ iounmap(priv->ctrl);
+out_pci_release_regions:
+ pci_release_regions(dev);
+out_pci_disable_device:
+ pci_disable_device(dev);
+out_free_priv:
+ kfree(priv);
+out_return:
+ return ret;
+}
+
+static void __devexit cmodio_pci_remove(struct pci_dev *dev)
+{
+ struct cmodio_device *priv = pci_get_drvdata(dev);
+
+ mfd_remove_devices(&dev->dev);
+ sysfs_remove_group(&dev->dev.kobj, &cmodio_sysfs_attr_group);
+ iounmap(priv->ctrl);
+ pci_release_regions(dev);
+ pci_disable_device(dev);
+ kfree(priv);
+}
+
+#define PCI_VENDOR_ID_JANZ 0x13c3
+
+/* The list of devices that this module will support */
+static DEFINE_PCI_DEVICE_TABLE(cmodio_pci_ids) = {
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_JANZ, 0x0101 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_JANZ, 0x0100 },
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, cmodio_pci_ids);
+
+static struct pci_driver cmodio_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = cmodio_pci_ids,
+ .probe = cmodio_pci_probe,
+ .remove = __devexit_p(cmodio_pci_remove),
+};
+
+/*
+ * Module Init / Exit
+ */
+
+static int __init cmodio_init(void)
+{
+ return pci_register_driver(&cmodio_pci_driver);
+}
+
+static void __exit cmodio_exit(void)
+{
+ pci_unregister_driver(&cmodio_pci_driver);
+}
+
+MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
+MODULE_DESCRIPTION("Janz CMOD-IO PCI MODULbus Carrier Board Driver");
+MODULE_LICENSE("GPL");
+
+module_init(cmodio_init);
+module_exit(cmodio_exit);
diff --git a/drivers/mfd/max8925-core.c b/drivers/mfd/max8925-core.c
index 85d63c0..f621bce 100644
--- a/drivers/mfd/max8925-core.c
+++ b/drivers/mfd/max8925-core.c
@@ -508,7 +508,7 @@
max8925_reg_read(chip->i2c, MAX8925_ON_OFF_IRQ2);
max8925_reg_read(chip->rtc, MAX8925_RTC_IRQ);
max8925_reg_read(chip->adc, MAX8925_TSC_IRQ);
- /* mask all interrupts */
+ /* mask all interrupts except for TSC */
max8925_reg_write(chip->rtc, MAX8925_ALARM0_CNTL, 0);
max8925_reg_write(chip->rtc, MAX8925_ALARM1_CNTL, 0);
max8925_reg_write(chip->i2c, MAX8925_CHG_IRQ1_MASK, 0xff);
@@ -516,7 +516,6 @@
max8925_reg_write(chip->i2c, MAX8925_ON_OFF_IRQ1_MASK, 0xff);
max8925_reg_write(chip->i2c, MAX8925_ON_OFF_IRQ2_MASK, 0xff);
max8925_reg_write(chip->rtc, MAX8925_RTC_IRQ_MASK, 0xff);
- max8925_reg_write(chip->adc, MAX8925_TSC_IRQ_MASK, 0xff);
mutex_init(&chip->irq_lock);
chip->core_irq = irq;
@@ -547,7 +546,11 @@
dev_err(chip->dev, "Failed to request core IRQ: %d\n", ret);
chip->core_irq = 0;
}
+
tsc_irq:
+ /* mask TSC interrupt */
+ max8925_reg_write(chip->adc, MAX8925_TSC_IRQ_MASK, 0x0f);
+
if (!pdata->tsc_irq) {
dev_warn(chip->dev, "No interrupt support on TSC IRQ\n");
return 0;
diff --git a/drivers/mfd/max8925-i2c.c b/drivers/mfd/max8925-i2c.c
index d9fd878..0219115 100644
--- a/drivers/mfd/max8925-i2c.c
+++ b/drivers/mfd/max8925-i2c.c
@@ -173,9 +173,6 @@
max8925_device_exit(chip);
i2c_unregister_device(chip->adc);
i2c_unregister_device(chip->rtc);
- i2c_set_clientdata(chip->adc, NULL);
- i2c_set_clientdata(chip->rtc, NULL);
- i2c_set_clientdata(chip->i2c, NULL);
kfree(chip);
return 0;
}
diff --git a/drivers/mfd/mc13783-core.c b/drivers/mfd/mc13783-core.c
index 1f68eca..fecf38a 100644
--- a/drivers/mfd/mc13783-core.c
+++ b/drivers/mfd/mc13783-core.c
@@ -679,6 +679,10 @@
if (pdata->flags & MC13783_USE_TOUCHSCREEN)
mc13783_add_subdevice(mc13783, "mc13783-ts");
+ if (pdata->flags & MC13783_USE_LED)
+ mc13783_add_subdevice_pdata(mc13783, "mc13783-led",
+ pdata->leds, sizeof(*pdata->leds));
+
return 0;
}
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index a94b131..a3fb4bc 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -1238,7 +1238,6 @@
free_irq(client->irq, menelaus);
kfree(menelaus);
- i2c_set_clientdata(client, NULL);
the_menelaus = NULL;
return 0;
}
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 8ffbb7a..7dd76bc 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -48,7 +48,7 @@
res[r].flags = cell->resources[r].flags;
/* Find out base to use */
- if (cell->resources[r].flags & IORESOURCE_MEM) {
+ if ((cell->resources[r].flags & IORESOURCE_MEM) && mem_base) {
res[r].parent = mem_base;
res[r].start = mem_base->start +
cell->resources[r].start;
diff --git a/drivers/mfd/pcf50633-adc.c b/drivers/mfd/pcf50633-adc.c
index fe8f922..aed0d2a 100644
--- a/drivers/mfd/pcf50633-adc.c
+++ b/drivers/mfd/pcf50633-adc.c
@@ -30,13 +30,13 @@
struct pcf50633_adc_request {
int mux;
int avg;
- int result;
void (*callback)(struct pcf50633 *, void *, int);
void *callback_param;
+};
- /* Used in case of sync requests */
+struct pcf50633_adc_sync_request {
+ int result;
struct completion completion;
-
};
#define PCF50633_MAX_ADC_FIFO_DEPTH 8
@@ -109,10 +109,10 @@
return 0;
}
-static void
-pcf50633_adc_sync_read_callback(struct pcf50633 *pcf, void *param, int result)
+static void pcf50633_adc_sync_read_callback(struct pcf50633 *pcf, void *param,
+ int result)
{
- struct pcf50633_adc_request *req = param;
+ struct pcf50633_adc_sync_request *req = param;
req->result = result;
complete(&req->completion);
@@ -120,28 +120,19 @@
int pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg)
{
- struct pcf50633_adc_request *req;
- int err;
+ struct pcf50633_adc_sync_request req;
+ int ret;
- /* req is freed when the result is ready, in interrupt handler */
- req = kzalloc(sizeof(*req), GFP_KERNEL);
- if (!req)
- return -ENOMEM;
+ init_completion(&req.completion);
- req->mux = mux;
- req->avg = avg;
- req->callback = pcf50633_adc_sync_read_callback;
- req->callback_param = req;
+ ret = pcf50633_adc_async_read(pcf, mux, avg,
+ pcf50633_adc_sync_read_callback, &req);
+ if (ret)
+ return ret;
- init_completion(&req->completion);
- err = adc_enqueue_request(pcf, req);
- if (err)
- return err;
+ wait_for_completion(&req.completion);
- wait_for_completion(&req->completion);
-
- /* FIXME by this time req might be already freed */
- return req->result;
+ return req.result;
}
EXPORT_SYMBOL_GPL(pcf50633_adc_sync_read);
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 63a614d..23e5855 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -21,16 +21,16 @@
#include <linux/workqueue.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
-#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/mfd/pcf50633/core.h>
-/* Two MBCS registers used during cold start */
-#define PCF50633_REG_MBCS1 0x4b
-#define PCF50633_REG_MBCS2 0x4c
-#define PCF50633_MBCS1_USBPRES 0x01
-#define PCF50633_MBCS1_ADAPTPRES 0x01
+int pcf50633_irq_init(struct pcf50633 *pcf, int irq);
+void pcf50633_irq_free(struct pcf50633 *pcf);
+#ifdef CONFIG_PM
+int pcf50633_irq_suspend(struct pcf50633 *pcf);
+int pcf50633_irq_resume(struct pcf50633 *pcf);
+#endif
static int __pcf50633_read(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
{
@@ -215,244 +215,6 @@
.attrs = pcf_sysfs_entries,
};
-int pcf50633_register_irq(struct pcf50633 *pcf, int irq,
- void (*handler) (int, void *), void *data)
-{
- if (irq < 0 || irq > PCF50633_NUM_IRQ || !handler)
- return -EINVAL;
-
- if (WARN_ON(pcf->irq_handler[irq].handler))
- return -EBUSY;
-
- mutex_lock(&pcf->lock);
- pcf->irq_handler[irq].handler = handler;
- pcf->irq_handler[irq].data = data;
- mutex_unlock(&pcf->lock);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(pcf50633_register_irq);
-
-int pcf50633_free_irq(struct pcf50633 *pcf, int irq)
-{
- if (irq < 0 || irq > PCF50633_NUM_IRQ)
- return -EINVAL;
-
- mutex_lock(&pcf->lock);
- pcf->irq_handler[irq].handler = NULL;
- mutex_unlock(&pcf->lock);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(pcf50633_free_irq);
-
-static int __pcf50633_irq_mask_set(struct pcf50633 *pcf, int irq, u8 mask)
-{
- u8 reg, bits, tmp;
- int ret = 0, idx;
-
- idx = irq >> 3;
- reg = PCF50633_REG_INT1M + idx;
- bits = 1 << (irq & 0x07);
-
- mutex_lock(&pcf->lock);
-
- if (mask) {
- ret = __pcf50633_read(pcf, reg, 1, &tmp);
- if (ret < 0)
- goto out;
-
- tmp |= bits;
-
- ret = __pcf50633_write(pcf, reg, 1, &tmp);
- if (ret < 0)
- goto out;
-
- pcf->mask_regs[idx] &= ~bits;
- pcf->mask_regs[idx] |= bits;
- } else {
- ret = __pcf50633_read(pcf, reg, 1, &tmp);
- if (ret < 0)
- goto out;
-
- tmp &= ~bits;
-
- ret = __pcf50633_write(pcf, reg, 1, &tmp);
- if (ret < 0)
- goto out;
-
- pcf->mask_regs[idx] &= ~bits;
- }
-out:
- mutex_unlock(&pcf->lock);
-
- return ret;
-}
-
-int pcf50633_irq_mask(struct pcf50633 *pcf, int irq)
-{
- dev_dbg(pcf->dev, "Masking IRQ %d\n", irq);
-
- return __pcf50633_irq_mask_set(pcf, irq, 1);
-}
-EXPORT_SYMBOL_GPL(pcf50633_irq_mask);
-
-int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq)
-{
- dev_dbg(pcf->dev, "Unmasking IRQ %d\n", irq);
-
- return __pcf50633_irq_mask_set(pcf, irq, 0);
-}
-EXPORT_SYMBOL_GPL(pcf50633_irq_unmask);
-
-int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq)
-{
- u8 reg, bits;
-
- reg = irq >> 3;
- bits = 1 << (irq & 0x07);
-
- return pcf->mask_regs[reg] & bits;
-}
-EXPORT_SYMBOL_GPL(pcf50633_irq_mask_get);
-
-static void pcf50633_irq_call_handler(struct pcf50633 *pcf, int irq)
-{
- if (pcf->irq_handler[irq].handler)
- pcf->irq_handler[irq].handler(irq, pcf->irq_handler[irq].data);
-}
-
-/* Maximum amount of time ONKEY is held before emergency action is taken */
-#define PCF50633_ONKEY1S_TIMEOUT 8
-
-static void pcf50633_irq_worker(struct work_struct *work)
-{
- struct pcf50633 *pcf;
- int ret, i, j;
- u8 pcf_int[5], chgstat;
-
- pcf = container_of(work, struct pcf50633, irq_work);
-
- /* Read the 5 INT regs in one transaction */
- ret = pcf50633_read_block(pcf, PCF50633_REG_INT1,
- ARRAY_SIZE(pcf_int), pcf_int);
- if (ret != ARRAY_SIZE(pcf_int)) {
- dev_err(pcf->dev, "Error reading INT registers\n");
-
- /*
- * If this doesn't ACK the interrupt to the chip, we'll be
- * called once again as we're level triggered.
- */
- goto out;
- }
-
- /* defeat 8s death from lowsys on A5 */
- pcf50633_reg_write(pcf, PCF50633_REG_OOCSHDWN, 0x04);
-
- /* We immediately read the usb and adapter status. We thus make sure
- * only of USBINS/USBREM IRQ handlers are called */
- if (pcf_int[0] & (PCF50633_INT1_USBINS | PCF50633_INT1_USBREM)) {
- chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
- if (chgstat & (0x3 << 4))
- pcf_int[0] &= ~(1 << PCF50633_INT1_USBREM);
- else
- pcf_int[0] &= ~(1 << PCF50633_INT1_USBINS);
- }
-
- /* Make sure only one of ADPINS or ADPREM is set */
- if (pcf_int[0] & (PCF50633_INT1_ADPINS | PCF50633_INT1_ADPREM)) {
- chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
- if (chgstat & (0x3 << 4))
- pcf_int[0] &= ~(1 << PCF50633_INT1_ADPREM);
- else
- pcf_int[0] &= ~(1 << PCF50633_INT1_ADPINS);
- }
-
- dev_dbg(pcf->dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x "
- "INT4=0x%02x INT5=0x%02x\n", pcf_int[0],
- pcf_int[1], pcf_int[2], pcf_int[3], pcf_int[4]);
-
- /* Some revisions of the chip don't have a 8s standby mode on
- * ONKEY1S press. We try to manually do it in such cases. */
- if ((pcf_int[0] & PCF50633_INT1_SECOND) && pcf->onkey1s_held) {
- dev_info(pcf->dev, "ONKEY1S held for %d secs\n",
- pcf->onkey1s_held);
- if (pcf->onkey1s_held++ == PCF50633_ONKEY1S_TIMEOUT)
- if (pcf->pdata->force_shutdown)
- pcf->pdata->force_shutdown(pcf);
- }
-
- if (pcf_int[2] & PCF50633_INT3_ONKEY1S) {
- dev_info(pcf->dev, "ONKEY1S held\n");
- pcf->onkey1s_held = 1 ;
-
- /* Unmask IRQ_SECOND */
- pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT1M,
- PCF50633_INT1_SECOND);
-
- /* Unmask IRQ_ONKEYR */
- pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT2M,
- PCF50633_INT2_ONKEYR);
- }
-
- if ((pcf_int[1] & PCF50633_INT2_ONKEYR) && pcf->onkey1s_held) {
- pcf->onkey1s_held = 0;
-
- /* Mask SECOND and ONKEYR interrupts */
- if (pcf->mask_regs[0] & PCF50633_INT1_SECOND)
- pcf50633_reg_set_bit_mask(pcf,
- PCF50633_REG_INT1M,
- PCF50633_INT1_SECOND,
- PCF50633_INT1_SECOND);
-
- if (pcf->mask_regs[1] & PCF50633_INT2_ONKEYR)
- pcf50633_reg_set_bit_mask(pcf,
- PCF50633_REG_INT2M,
- PCF50633_INT2_ONKEYR,
- PCF50633_INT2_ONKEYR);
- }
-
- /* Have we just resumed ? */
- if (pcf->is_suspended) {
- pcf->is_suspended = 0;
-
- /* Set the resume reason filtering out non resumers */
- for (i = 0; i < ARRAY_SIZE(pcf_int); i++)
- pcf->resume_reason[i] = pcf_int[i] &
- pcf->pdata->resumers[i];
-
- /* Make sure we don't pass on any ONKEY events to
- * userspace now */
- pcf_int[1] &= ~(PCF50633_INT2_ONKEYR | PCF50633_INT2_ONKEYF);
- }
-
- for (i = 0; i < ARRAY_SIZE(pcf_int); i++) {
- /* Unset masked interrupts */
- pcf_int[i] &= ~pcf->mask_regs[i];
-
- for (j = 0; j < 8 ; j++)
- if (pcf_int[i] & (1 << j))
- pcf50633_irq_call_handler(pcf, (i * 8) + j);
- }
-
-out:
- put_device(pcf->dev);
- enable_irq(pcf->irq);
-}
-
-static irqreturn_t pcf50633_irq(int irq, void *data)
-{
- struct pcf50633 *pcf = data;
-
- dev_dbg(pcf->dev, "pcf50633_irq\n");
-
- get_device(pcf->dev);
- disable_irq_nosync(pcf->irq);
- queue_work(pcf->work_queue, &pcf->irq_work);
-
- return IRQ_HANDLED;
-}
-
static void
pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
struct platform_device **pdev)
@@ -479,70 +241,17 @@
static int pcf50633_suspend(struct i2c_client *client, pm_message_t state)
{
struct pcf50633 *pcf;
- int ret = 0, i;
- u8 res[5];
-
pcf = i2c_get_clientdata(client);
- /* Make sure our interrupt handlers are not called
- * henceforth */
- disable_irq(pcf->irq);
-
- /* Make sure that any running IRQ worker has quit */
- cancel_work_sync(&pcf->irq_work);
-
- /* Save the masks */
- ret = pcf50633_read_block(pcf, PCF50633_REG_INT1M,
- ARRAY_SIZE(pcf->suspend_irq_masks),
- pcf->suspend_irq_masks);
- if (ret < 0) {
- dev_err(pcf->dev, "error saving irq masks\n");
- goto out;
- }
-
- /* Write wakeup irq masks */
- for (i = 0; i < ARRAY_SIZE(res); i++)
- res[i] = ~pcf->pdata->resumers[i];
-
- ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
- ARRAY_SIZE(res), &res[0]);
- if (ret < 0) {
- dev_err(pcf->dev, "error writing wakeup irq masks\n");
- goto out;
- }
-
- pcf->is_suspended = 1;
-
-out:
- return ret;
+ return pcf50633_irq_suspend(pcf);
}
static int pcf50633_resume(struct i2c_client *client)
{
struct pcf50633 *pcf;
- int ret;
-
pcf = i2c_get_clientdata(client);
- /* Write the saved mask registers */
- ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
- ARRAY_SIZE(pcf->suspend_irq_masks),
- pcf->suspend_irq_masks);
- if (ret < 0)
- dev_err(pcf->dev, "Error restoring saved suspend masks\n");
-
- /* Restore regulators' state */
-
-
- get_device(pcf->dev);
-
- /*
- * Clear any pending interrupts and set resume reason if any.
- * This will leave with enable_irq()
- */
- pcf50633_irq_worker(&pcf->irq_work);
-
- return 0;
+ return pcf50633_irq_resume(pcf);
}
#else
#define pcf50633_suspend NULL
@@ -573,43 +282,19 @@
i2c_set_clientdata(client, pcf);
pcf->dev = &client->dev;
pcf->i2c_client = client;
- pcf->irq = client->irq;
- pcf->work_queue = create_singlethread_workqueue("pcf50633");
-
- if (!pcf->work_queue) {
- dev_err(&client->dev, "Failed to alloc workqueue\n");
- ret = -ENOMEM;
- goto err_free;
- }
-
- INIT_WORK(&pcf->irq_work, pcf50633_irq_worker);
version = pcf50633_reg_read(pcf, 0);
variant = pcf50633_reg_read(pcf, 1);
if (version < 0 || variant < 0) {
dev_err(pcf->dev, "Unable to probe pcf50633\n");
ret = -ENODEV;
- goto err_destroy_workqueue;
+ goto err_free;
}
dev_info(pcf->dev, "Probed device version %d variant %d\n",
version, variant);
- /* Enable all interrupts except RTC SECOND */
- pcf->mask_regs[0] = 0x80;
- pcf50633_reg_write(pcf, PCF50633_REG_INT1M, pcf->mask_regs[0]);
- pcf50633_reg_write(pcf, PCF50633_REG_INT2M, 0x00);
- pcf50633_reg_write(pcf, PCF50633_REG_INT3M, 0x00);
- pcf50633_reg_write(pcf, PCF50633_REG_INT4M, 0x00);
- pcf50633_reg_write(pcf, PCF50633_REG_INT5M, 0x00);
-
- ret = request_irq(client->irq, pcf50633_irq,
- IRQF_TRIGGER_LOW, "pcf50633", pcf);
-
- if (ret) {
- dev_err(pcf->dev, "Failed to request IRQ %d\n", ret);
- goto err_destroy_workqueue;
- }
+ pcf50633_irq_init(pcf, client->irq);
/* Create sub devices */
pcf50633_client_dev_register(pcf, "pcf50633-input",
@@ -620,6 +305,9 @@
&pcf->mbc_pdev);
pcf50633_client_dev_register(pcf, "pcf50633-adc",
&pcf->adc_pdev);
+ pcf50633_client_dev_register(pcf, "pcf50633-backlight",
+ &pcf->bl_pdev);
+
for (i = 0; i < PCF50633_NUM_REGULATORS; i++) {
struct platform_device *pdev;
@@ -638,10 +326,6 @@
platform_device_add(pdev);
}
- if (enable_irq_wake(client->irq) < 0)
- dev_err(pcf->dev, "IRQ %u cannot be enabled as wake-up source"
- "in this hardware revision", client->irq);
-
ret = sysfs_create_group(&client->dev.kobj, &pcf_attr_group);
if (ret)
dev_err(pcf->dev, "error creating sysfs entries\n");
@@ -651,10 +335,7 @@
return 0;
-err_destroy_workqueue:
- destroy_workqueue(pcf->work_queue);
err_free:
- i2c_set_clientdata(client, NULL);
kfree(pcf);
return ret;
@@ -665,8 +346,7 @@
struct pcf50633 *pcf = i2c_get_clientdata(client);
int i;
- free_irq(pcf->irq, pcf);
- destroy_workqueue(pcf->work_queue);
+ pcf50633_irq_free(pcf);
platform_device_unregister(pcf->input_pdev);
platform_device_unregister(pcf->rtc_pdev);
diff --git a/drivers/mfd/pcf50633-irq.c b/drivers/mfd/pcf50633-irq.c
new file mode 100644
index 0000000..1b0192f
--- /dev/null
+++ b/drivers/mfd/pcf50633-irq.c
@@ -0,0 +1,318 @@
+/* NXP PCF50633 Power Management Unit (PMU) driver
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * Balaji Rao <balajirrao@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/pcf50633/core.h>
+
+/* Two MBCS registers used during cold start */
+#define PCF50633_REG_MBCS1 0x4b
+#define PCF50633_REG_MBCS2 0x4c
+#define PCF50633_MBCS1_USBPRES 0x01
+#define PCF50633_MBCS1_ADAPTPRES 0x01
+
+int pcf50633_register_irq(struct pcf50633 *pcf, int irq,
+ void (*handler) (int, void *), void *data)
+{
+ if (irq < 0 || irq >= PCF50633_NUM_IRQ || !handler)
+ return -EINVAL;
+
+ if (WARN_ON(pcf->irq_handler[irq].handler))
+ return -EBUSY;
+
+ mutex_lock(&pcf->lock);
+ pcf->irq_handler[irq].handler = handler;
+ pcf->irq_handler[irq].data = data;
+ mutex_unlock(&pcf->lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pcf50633_register_irq);
+
+int pcf50633_free_irq(struct pcf50633 *pcf, int irq)
+{
+ if (irq < 0 || irq >= PCF50633_NUM_IRQ)
+ return -EINVAL;
+
+ mutex_lock(&pcf->lock);
+ pcf->irq_handler[irq].handler = NULL;
+ mutex_unlock(&pcf->lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pcf50633_free_irq);
+
+static int __pcf50633_irq_mask_set(struct pcf50633 *pcf, int irq, u8 mask)
+{
+ u8 reg, bit;
+ int ret = 0, idx;
+
+ idx = irq >> 3;
+ reg = PCF50633_REG_INT1M + idx;
+ bit = 1 << (irq & 0x07);
+
+ pcf50633_reg_set_bit_mask(pcf, reg, bit, mask ? bit : 0);
+
+ mutex_lock(&pcf->lock);
+
+ if (mask)
+ pcf->mask_regs[idx] |= bit;
+ else
+ pcf->mask_regs[idx] &= ~bit;
+
+ mutex_unlock(&pcf->lock);
+
+ return ret;
+}
+
+int pcf50633_irq_mask(struct pcf50633 *pcf, int irq)
+{
+ dev_dbg(pcf->dev, "Masking IRQ %d\n", irq);
+
+ return __pcf50633_irq_mask_set(pcf, irq, 1);
+}
+EXPORT_SYMBOL_GPL(pcf50633_irq_mask);
+
+int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq)
+{
+ dev_dbg(pcf->dev, "Unmasking IRQ %d\n", irq);
+
+ return __pcf50633_irq_mask_set(pcf, irq, 0);
+}
+EXPORT_SYMBOL_GPL(pcf50633_irq_unmask);
+
+int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq)
+{
+ u8 reg, bits;
+
+ reg = irq >> 3;
+ bits = 1 << (irq & 0x07);
+
+ return pcf->mask_regs[reg] & bits;
+}
+EXPORT_SYMBOL_GPL(pcf50633_irq_mask_get);
+
+static void pcf50633_irq_call_handler(struct pcf50633 *pcf, int irq)
+{
+ if (pcf->irq_handler[irq].handler)
+ pcf->irq_handler[irq].handler(irq, pcf->irq_handler[irq].data);
+}
+
+/* Maximum amount of time ONKEY is held before emergency action is taken */
+#define PCF50633_ONKEY1S_TIMEOUT 8
+
+static irqreturn_t pcf50633_irq(int irq, void *data)
+{
+ struct pcf50633 *pcf = data;
+ int ret, i, j;
+ u8 pcf_int[5], chgstat;
+
+ /* Read the 5 INT regs in one transaction */
+ ret = pcf50633_read_block(pcf, PCF50633_REG_INT1,
+ ARRAY_SIZE(pcf_int), pcf_int);
+ if (ret != ARRAY_SIZE(pcf_int)) {
+ dev_err(pcf->dev, "Error reading INT registers\n");
+
+ /*
+ * If this doesn't ACK the interrupt to the chip, we'll be
+ * called once again as we're level triggered.
+ */
+ goto out;
+ }
+
+ /* defeat 8s death from lowsys on A5 */
+ pcf50633_reg_write(pcf, PCF50633_REG_OOCSHDWN, 0x04);
+
+ /* We immediately read the usb and adapter status. We thus make sure
+ * only of USBINS/USBREM IRQ handlers are called */
+ if (pcf_int[0] & (PCF50633_INT1_USBINS | PCF50633_INT1_USBREM)) {
+ chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
+ if (chgstat & (0x3 << 4))
+ pcf_int[0] &= ~PCF50633_INT1_USBREM;
+ else
+ pcf_int[0] &= ~PCF50633_INT1_USBINS;
+ }
+
+ /* Make sure only one of ADPINS or ADPREM is set */
+ if (pcf_int[0] & (PCF50633_INT1_ADPINS | PCF50633_INT1_ADPREM)) {
+ chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
+ if (chgstat & (0x3 << 4))
+ pcf_int[0] &= ~PCF50633_INT1_ADPREM;
+ else
+ pcf_int[0] &= ~PCF50633_INT1_ADPINS;
+ }
+
+ dev_dbg(pcf->dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x "
+ "INT4=0x%02x INT5=0x%02x\n", pcf_int[0],
+ pcf_int[1], pcf_int[2], pcf_int[3], pcf_int[4]);
+
+ /* Some revisions of the chip don't have a 8s standby mode on
+ * ONKEY1S press. We try to manually do it in such cases. */
+ if ((pcf_int[0] & PCF50633_INT1_SECOND) && pcf->onkey1s_held) {
+ dev_info(pcf->dev, "ONKEY1S held for %d secs\n",
+ pcf->onkey1s_held);
+ if (pcf->onkey1s_held++ == PCF50633_ONKEY1S_TIMEOUT)
+ if (pcf->pdata->force_shutdown)
+ pcf->pdata->force_shutdown(pcf);
+ }
+
+ if (pcf_int[2] & PCF50633_INT3_ONKEY1S) {
+ dev_info(pcf->dev, "ONKEY1S held\n");
+ pcf->onkey1s_held = 1 ;
+
+ /* Unmask IRQ_SECOND */
+ pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT1M,
+ PCF50633_INT1_SECOND);
+
+ /* Unmask IRQ_ONKEYR */
+ pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT2M,
+ PCF50633_INT2_ONKEYR);
+ }
+
+ if ((pcf_int[1] & PCF50633_INT2_ONKEYR) && pcf->onkey1s_held) {
+ pcf->onkey1s_held = 0;
+
+ /* Mask SECOND and ONKEYR interrupts */
+ if (pcf->mask_regs[0] & PCF50633_INT1_SECOND)
+ pcf50633_reg_set_bit_mask(pcf,
+ PCF50633_REG_INT1M,
+ PCF50633_INT1_SECOND,
+ PCF50633_INT1_SECOND);
+
+ if (pcf->mask_regs[1] & PCF50633_INT2_ONKEYR)
+ pcf50633_reg_set_bit_mask(pcf,
+ PCF50633_REG_INT2M,
+ PCF50633_INT2_ONKEYR,
+ PCF50633_INT2_ONKEYR);
+ }
+
+ /* Have we just resumed ? */
+ if (pcf->is_suspended) {
+ pcf->is_suspended = 0;
+
+ /* Set the resume reason filtering out non resumers */
+ for (i = 0; i < ARRAY_SIZE(pcf_int); i++)
+ pcf->resume_reason[i] = pcf_int[i] &
+ pcf->pdata->resumers[i];
+
+ /* Make sure we don't pass on any ONKEY events to
+ * userspace now */
+ pcf_int[1] &= ~(PCF50633_INT2_ONKEYR | PCF50633_INT2_ONKEYF);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(pcf_int); i++) {
+ /* Unset masked interrupts */
+ pcf_int[i] &= ~pcf->mask_regs[i];
+
+ for (j = 0; j < 8 ; j++)
+ if (pcf_int[i] & (1 << j))
+ pcf50633_irq_call_handler(pcf, (i * 8) + j);
+ }
+
+out:
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_PM
+
+int pcf50633_irq_suspend(struct pcf50633 *pcf)
+{
+ int ret;
+ int i;
+ u8 res[5];
+
+
+ /* Make sure our interrupt handlers are not called
+ * henceforth */
+ disable_irq(pcf->irq);
+
+ /* Save the masks */
+ ret = pcf50633_read_block(pcf, PCF50633_REG_INT1M,
+ ARRAY_SIZE(pcf->suspend_irq_masks),
+ pcf->suspend_irq_masks);
+ if (ret < 0) {
+ dev_err(pcf->dev, "error saving irq masks\n");
+ goto out;
+ }
+
+ /* Write wakeup irq masks */
+ for (i = 0; i < ARRAY_SIZE(res); i++)
+ res[i] = ~pcf->pdata->resumers[i];
+
+ ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
+ ARRAY_SIZE(res), &res[0]);
+ if (ret < 0) {
+ dev_err(pcf->dev, "error writing wakeup irq masks\n");
+ goto out;
+ }
+
+ pcf->is_suspended = 1;
+
+out:
+ return ret;
+}
+
+int pcf50633_irq_resume(struct pcf50633 *pcf)
+{
+ int ret;
+
+ /* Write the saved mask registers */
+ ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
+ ARRAY_SIZE(pcf->suspend_irq_masks),
+ pcf->suspend_irq_masks);
+ if (ret < 0)
+ dev_err(pcf->dev, "Error restoring saved suspend masks\n");
+
+ enable_irq(pcf->irq);
+
+ return ret;
+}
+
+#endif
+
+int pcf50633_irq_init(struct pcf50633 *pcf, int irq)
+{
+ int ret;
+
+ pcf->irq = irq;
+
+ /* Enable all interrupts except RTC SECOND */
+ pcf->mask_regs[0] = 0x80;
+ pcf50633_reg_write(pcf, PCF50633_REG_INT1M, pcf->mask_regs[0]);
+ pcf50633_reg_write(pcf, PCF50633_REG_INT2M, 0x00);
+ pcf50633_reg_write(pcf, PCF50633_REG_INT3M, 0x00);
+ pcf50633_reg_write(pcf, PCF50633_REG_INT4M, 0x00);
+ pcf50633_reg_write(pcf, PCF50633_REG_INT5M, 0x00);
+
+ ret = request_threaded_irq(irq, NULL, pcf50633_irq,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ "pcf50633", pcf);
+
+ if (ret)
+ dev_err(pcf->dev, "Failed to request IRQ %d\n", ret);
+
+ if (enable_irq_wake(irq) < 0)
+ dev_err(pcf->dev, "IRQ %u cannot be enabled as wake-up source"
+ "in this hardware revision", irq);
+
+ return ret;
+}
+
+void pcf50633_irq_free(struct pcf50633 *pcf)
+{
+ free_irq(pcf->irq, pcf);
+}
diff --git a/drivers/mfd/rdc321x-southbridge.c b/drivers/mfd/rdc321x-southbridge.c
new file mode 100644
index 0000000..5092297
--- /dev/null
+++ b/drivers/mfd/rdc321x-southbridge.c
@@ -0,0 +1,123 @@
+/*
+ * RDC321x MFD southbrige driver
+ *
+ * Copyright (C) 2007-2010 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2010 Bernhard Loos <bernhardloos@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rdc321x.h>
+
+static struct rdc321x_wdt_pdata rdc321x_wdt_pdata;
+
+static struct resource rdc321x_wdt_resource[] = {
+ {
+ .name = "wdt-reg",
+ .start = RDC321X_WDT_CTRL,
+ .end = RDC321X_WDT_CTRL + 0x3,
+ .flags = IORESOURCE_IO,
+ }
+};
+
+static struct rdc321x_gpio_pdata rdc321x_gpio_pdata = {
+ .max_gpios = RDC321X_MAX_GPIO,
+};
+
+static struct resource rdc321x_gpio_resources[] = {
+ {
+ .name = "gpio-reg1",
+ .start = RDC321X_GPIO_CTRL_REG1,
+ .end = RDC321X_GPIO_CTRL_REG1 + 0x7,
+ .flags = IORESOURCE_IO,
+ }, {
+ .name = "gpio-reg2",
+ .start = RDC321X_GPIO_CTRL_REG2,
+ .end = RDC321X_GPIO_CTRL_REG2 + 0x7,
+ .flags = IORESOURCE_IO,
+ }
+};
+
+static struct mfd_cell rdc321x_sb_cells[] = {
+ {
+ .name = "rdc321x-wdt",
+ .resources = rdc321x_wdt_resource,
+ .num_resources = ARRAY_SIZE(rdc321x_wdt_resource),
+ .driver_data = &rdc321x_wdt_pdata,
+ }, {
+ .name = "rdc321x-gpio",
+ .resources = rdc321x_gpio_resources,
+ .num_resources = ARRAY_SIZE(rdc321x_gpio_resources),
+ .driver_data = &rdc321x_gpio_pdata,
+ },
+};
+
+static int __devinit rdc321x_sb_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int err;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "failed to enable device\n");
+ return err;
+ }
+
+ rdc321x_gpio_pdata.sb_pdev = pdev;
+ rdc321x_wdt_pdata.sb_pdev = pdev;
+
+ return mfd_add_devices(&pdev->dev, -1,
+ rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells), NULL, 0);
+}
+
+static void __devexit rdc321x_sb_remove(struct pci_dev *pdev)
+{
+ mfd_remove_devices(&pdev->dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(rdc321x_sb_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_RDC, PCI_DEVICE_ID_RDC_R6030) },
+ {}
+};
+
+static struct pci_driver rdc321x_sb_driver = {
+ .name = "RDC321x Southbridge",
+ .id_table = rdc321x_sb_table,
+ .probe = rdc321x_sb_probe,
+ .remove = __devexit_p(rdc321x_sb_remove),
+};
+
+static int __init rdc321x_sb_init(void)
+{
+ return pci_register_driver(&rdc321x_sb_driver);
+}
+
+static void __exit rdc321x_sb_exit(void)
+{
+ pci_unregister_driver(&rdc321x_sb_driver);
+}
+
+module_init(rdc321x_sb_init);
+module_exit(rdc321x_sb_exit);
+
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("RDC R-321x MFD southbridge driver");
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
index da6383a..5041d33 100644
--- a/drivers/mfd/t7l66xb.c
+++ b/drivers/mfd/t7l66xb.c
@@ -318,6 +318,9 @@
struct resource *iomem, *rscr;
int ret;
+ if (pdata == NULL)
+ return -EINVAL;
+
iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!iomem)
return -EINVAL;
diff --git a/drivers/mfd/tc35892.c b/drivers/mfd/tc35892.c
new file mode 100644
index 0000000..e619e2a
--- /dev/null
+++ b/drivers/mfd/tc35892.c
@@ -0,0 +1,345 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> for ST-Ericsson
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tc35892.h>
+
+/**
+ * tc35892_reg_read() - read a single TC35892 register
+ * @tc35892: Device to read from
+ * @reg: Register to read
+ */
+int tc35892_reg_read(struct tc35892 *tc35892, u8 reg)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(tc35892->i2c, reg);
+ if (ret < 0)
+ dev_err(tc35892->dev, "failed to read reg %#x: %d\n",
+ reg, ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(tc35892_reg_read);
+
+/**
+ * tc35892_reg_read() - write a single TC35892 register
+ * @tc35892: Device to write to
+ * @reg: Register to read
+ * @data: Value to write
+ */
+int tc35892_reg_write(struct tc35892 *tc35892, u8 reg, u8 data)
+{
+ int ret;
+
+ ret = i2c_smbus_write_byte_data(tc35892->i2c, reg, data);
+ if (ret < 0)
+ dev_err(tc35892->dev, "failed to write reg %#x: %d\n",
+ reg, ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(tc35892_reg_write);
+
+/**
+ * tc35892_block_read() - read multiple TC35892 registers
+ * @tc35892: Device to read from
+ * @reg: First register
+ * @length: Number of registers
+ * @values: Buffer to write to
+ */
+int tc35892_block_read(struct tc35892 *tc35892, u8 reg, u8 length, u8 *values)
+{
+ int ret;
+
+ ret = i2c_smbus_read_i2c_block_data(tc35892->i2c, reg, length, values);
+ if (ret < 0)
+ dev_err(tc35892->dev, "failed to read regs %#x: %d\n",
+ reg, ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(tc35892_block_read);
+
+/**
+ * tc35892_block_write() - write multiple TC35892 registers
+ * @tc35892: Device to write to
+ * @reg: First register
+ * @length: Number of registers
+ * @values: Values to write
+ */
+int tc35892_block_write(struct tc35892 *tc35892, u8 reg, u8 length,
+ const u8 *values)
+{
+ int ret;
+
+ ret = i2c_smbus_write_i2c_block_data(tc35892->i2c, reg, length,
+ values);
+ if (ret < 0)
+ dev_err(tc35892->dev, "failed to write regs %#x: %d\n",
+ reg, ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(tc35892_block_write);
+
+/**
+ * tc35892_set_bits() - set the value of a bitfield in a TC35892 register
+ * @tc35892: Device to write to
+ * @reg: Register to write
+ * @mask: Mask of bits to set
+ * @values: Value to set
+ */
+int tc35892_set_bits(struct tc35892 *tc35892, u8 reg, u8 mask, u8 val)
+{
+ int ret;
+
+ mutex_lock(&tc35892->lock);
+
+ ret = tc35892_reg_read(tc35892, reg);
+ if (ret < 0)
+ goto out;
+
+ ret &= ~mask;
+ ret |= val;
+
+ ret = tc35892_reg_write(tc35892, reg, ret);
+
+out:
+ mutex_unlock(&tc35892->lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(tc35892_set_bits);
+
+static struct resource gpio_resources[] = {
+ {
+ .start = TC35892_INT_GPIIRQ,
+ .end = TC35892_INT_GPIIRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell tc35892_devs[] = {
+ {
+ .name = "tc35892-gpio",
+ .num_resources = ARRAY_SIZE(gpio_resources),
+ .resources = &gpio_resources[0],
+ },
+};
+
+static irqreturn_t tc35892_irq(int irq, void *data)
+{
+ struct tc35892 *tc35892 = data;
+ int status;
+
+ status = tc35892_reg_read(tc35892, TC35892_IRQST);
+ if (status < 0)
+ return IRQ_NONE;
+
+ while (status) {
+ int bit = __ffs(status);
+
+ handle_nested_irq(tc35892->irq_base + bit);
+ status &= ~(1 << bit);
+ }
+
+ /*
+ * A dummy read or write (to any register) appears to be necessary to
+ * have the last interrupt clear (for example, GPIO IC write) take
+ * effect.
+ */
+ tc35892_reg_read(tc35892, TC35892_IRQST);
+
+ return IRQ_HANDLED;
+}
+
+static void tc35892_irq_dummy(unsigned int irq)
+{
+ /* No mask/unmask at this level */
+}
+
+static struct irq_chip tc35892_irq_chip = {
+ .name = "tc35892",
+ .mask = tc35892_irq_dummy,
+ .unmask = tc35892_irq_dummy,
+};
+
+static int tc35892_irq_init(struct tc35892 *tc35892)
+{
+ int base = tc35892->irq_base;
+ int irq;
+
+ for (irq = base; irq < base + TC35892_NR_INTERNAL_IRQS; irq++) {
+ set_irq_chip_data(irq, tc35892);
+ set_irq_chip_and_handler(irq, &tc35892_irq_chip,
+ handle_edge_irq);
+ set_irq_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ set_irq_noprobe(irq);
+#endif
+ }
+
+ return 0;
+}
+
+static void tc35892_irq_remove(struct tc35892 *tc35892)
+{
+ int base = tc35892->irq_base;
+ int irq;
+
+ for (irq = base; irq < base + TC35892_NR_INTERNAL_IRQS; irq++) {
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, 0);
+#endif
+ set_irq_chip_and_handler(irq, NULL, NULL);
+ set_irq_chip_data(irq, NULL);
+ }
+}
+
+static int tc35892_chip_init(struct tc35892 *tc35892)
+{
+ int manf, ver, ret;
+
+ manf = tc35892_reg_read(tc35892, TC35892_MANFCODE);
+ if (manf < 0)
+ return manf;
+
+ ver = tc35892_reg_read(tc35892, TC35892_VERSION);
+ if (ver < 0)
+ return ver;
+
+ if (manf != TC35892_MANFCODE_MAGIC) {
+ dev_err(tc35892->dev, "unknown manufacturer: %#x\n", manf);
+ return -EINVAL;
+ }
+
+ dev_info(tc35892->dev, "manufacturer: %#x, version: %#x\n", manf, ver);
+
+ /* Put everything except the IRQ module into reset */
+ ret = tc35892_reg_write(tc35892, TC35892_RSTCTRL,
+ TC35892_RSTCTRL_TIMRST
+ | TC35892_RSTCTRL_ROTRST
+ | TC35892_RSTCTRL_KBDRST
+ | TC35892_RSTCTRL_GPIRST);
+ if (ret < 0)
+ return ret;
+
+ /* Clear the reset interrupt. */
+ return tc35892_reg_write(tc35892, TC35892_RSTINTCLR, 0x1);
+}
+
+static int __devinit tc35892_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct tc35892_platform_data *pdata = i2c->dev.platform_data;
+ struct tc35892 *tc35892;
+ int ret;
+
+ if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA
+ | I2C_FUNC_SMBUS_I2C_BLOCK))
+ return -EIO;
+
+ tc35892 = kzalloc(sizeof(struct tc35892), GFP_KERNEL);
+ if (!tc35892)
+ return -ENOMEM;
+
+ mutex_init(&tc35892->lock);
+
+ tc35892->dev = &i2c->dev;
+ tc35892->i2c = i2c;
+ tc35892->pdata = pdata;
+ tc35892->irq_base = pdata->irq_base;
+ tc35892->num_gpio = id->driver_data;
+
+ i2c_set_clientdata(i2c, tc35892);
+
+ ret = tc35892_chip_init(tc35892);
+ if (ret)
+ goto out_free;
+
+ ret = tc35892_irq_init(tc35892);
+ if (ret)
+ goto out_free;
+
+ ret = request_threaded_irq(tc35892->i2c->irq, NULL, tc35892_irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "tc35892", tc35892);
+ if (ret) {
+ dev_err(tc35892->dev, "failed to request IRQ: %d\n", ret);
+ goto out_removeirq;
+ }
+
+ ret = mfd_add_devices(tc35892->dev, -1, tc35892_devs,
+ ARRAY_SIZE(tc35892_devs), NULL,
+ tc35892->irq_base);
+ if (ret) {
+ dev_err(tc35892->dev, "failed to add children\n");
+ goto out_freeirq;
+ }
+
+ return 0;
+
+out_freeirq:
+ free_irq(tc35892->i2c->irq, tc35892);
+out_removeirq:
+ tc35892_irq_remove(tc35892);
+out_free:
+ kfree(tc35892);
+ return ret;
+}
+
+static int __devexit tc35892_remove(struct i2c_client *client)
+{
+ struct tc35892 *tc35892 = i2c_get_clientdata(client);
+
+ mfd_remove_devices(tc35892->dev);
+
+ free_irq(tc35892->i2c->irq, tc35892);
+ tc35892_irq_remove(tc35892);
+
+ kfree(tc35892);
+
+ return 0;
+}
+
+static const struct i2c_device_id tc35892_id[] = {
+ { "tc35892", 24 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tc35892_id);
+
+static struct i2c_driver tc35892_driver = {
+ .driver.name = "tc35892",
+ .driver.owner = THIS_MODULE,
+ .probe = tc35892_probe,
+ .remove = __devexit_p(tc35892_remove),
+ .id_table = tc35892_id,
+};
+
+static int __init tc35892_init(void)
+{
+ return i2c_add_driver(&tc35892_driver);
+}
+subsys_initcall(tc35892_init);
+
+static void __exit tc35892_exit(void)
+{
+ i2c_del_driver(&tc35892_driver);
+}
+module_exit(tc35892_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TC35892 MFD core driver");
+MODULE_AUTHOR("Hanumath Prasad, Rabin Vincent");
diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c
index 7f478ec..ac59950 100644
--- a/drivers/mfd/timberdale.c
+++ b/drivers/mfd/timberdale.c
@@ -31,6 +31,7 @@
#include <linux/i2c.h>
#include <linux/i2c-ocores.h>
+#include <linux/i2c-xiic.h>
#include <linux/i2c/tsc2007.h>
#include <linux/spi/spi.h>
@@ -40,6 +41,8 @@
#include <media/timb_radio.h>
+#include <linux/timb_dma.h>
+
#include "timberdale.h"
#define DRIVER_NAME "timberdale"
@@ -69,6 +72,12 @@
},
};
+static __devinitdata struct xiic_i2c_platform_data
+timberdale_xiic_platform_data = {
+ .devices = timberdale_i2c_board_info,
+ .num_devices = ARRAY_SIZE(timberdale_i2c_board_info)
+};
+
static __devinitdata struct ocores_i2c_platform_data
timberdale_ocores_platform_data = {
.regstep = 4,
@@ -77,7 +86,20 @@
.num_devices = ARRAY_SIZE(timberdale_i2c_board_info)
};
-const static __devinitconst struct resource timberdale_ocores_resources[] = {
+static const __devinitconst struct resource timberdale_xiic_resources[] = {
+ {
+ .start = XIICOFFSET,
+ .end = XIICEND,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_TIMBERDALE_I2C,
+ .end = IRQ_TIMBERDALE_I2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static const __devinitconst struct resource timberdale_ocores_resources[] = {
{
.start = OCORESOFFSET,
.end = OCORESEND,
@@ -126,7 +148,7 @@
*/
};
-const static __devinitconst struct resource timberdale_spi_resources[] = {
+static const __devinitconst struct resource timberdale_spi_resources[] = {
{
.start = SPIOFFSET,
.end = SPIEND,
@@ -139,7 +161,7 @@
},
};
-const static __devinitconst struct resource timberdale_eth_resources[] = {
+static const __devinitconst struct resource timberdale_eth_resources[] = {
{
.start = ETHOFFSET,
.end = ETHEND,
@@ -159,7 +181,7 @@
.irq_base = 200,
};
-const static __devinitconst struct resource timberdale_gpio_resources[] = {
+static const __devinitconst struct resource timberdale_gpio_resources[] = {
{
.start = GPIOOFFSET,
.end = GPIOEND,
@@ -172,7 +194,7 @@
},
};
-const static __devinitconst struct resource timberdale_mlogicore_resources[] = {
+static const __devinitconst struct resource timberdale_mlogicore_resources[] = {
{
.start = MLCOREOFFSET,
.end = MLCOREEND,
@@ -190,7 +212,7 @@
},
};
-const static __devinitconst struct resource timberdale_uart_resources[] = {
+static const __devinitconst struct resource timberdale_uart_resources[] = {
{
.start = UARTOFFSET,
.end = UARTEND,
@@ -203,7 +225,7 @@
},
};
-const static __devinitconst struct resource timberdale_uartlite_resources[] = {
+static const __devinitconst struct resource timberdale_uartlite_resources[] = {
{
.start = UARTLITEOFFSET,
.end = UARTLITEEND,
@@ -216,7 +238,7 @@
},
};
-const static __devinitconst struct resource timberdale_radio_resources[] = {
+static const __devinitconst struct resource timberdale_radio_resources[] = {
{
.start = RDSOFFSET,
.end = RDSEND,
@@ -250,7 +272,66 @@
}
};
-const static __devinitconst struct resource timberdale_dma_resources[] = {
+static __devinitdata struct timb_dma_platform_data timb_dma_platform_data = {
+ .nr_channels = 10,
+ .channels = {
+ {
+ /* UART RX */
+ .rx = true,
+ .descriptors = 2,
+ .descriptor_elements = 1
+ },
+ {
+ /* UART TX */
+ .rx = false,
+ .descriptors = 2,
+ .descriptor_elements = 1
+ },
+ {
+ /* MLB RX */
+ .rx = true,
+ .descriptors = 2,
+ .descriptor_elements = 1
+ },
+ {
+ /* MLB TX */
+ .rx = false,
+ .descriptors = 2,
+ .descriptor_elements = 1
+ },
+ {
+ /* Video RX */
+ .rx = true,
+ .bytes_per_line = 1440,
+ .descriptors = 2,
+ .descriptor_elements = 16
+ },
+ {
+ /* Video framedrop */
+ },
+ {
+ /* SDHCI RX */
+ .rx = true,
+ },
+ {
+ /* SDHCI TX */
+ },
+ {
+ /* ETH RX */
+ .rx = true,
+ .descriptors = 2,
+ .descriptor_elements = 1
+ },
+ {
+ /* ETH TX */
+ .rx = false,
+ .descriptors = 2,
+ .descriptor_elements = 1
+ },
+ }
+};
+
+static const __devinitconst struct resource timberdale_dma_resources[] = {
{
.start = DMAOFFSET,
.end = DMAEND,
@@ -265,11 +346,25 @@
static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg0[] = {
{
+ .name = "timb-dma",
+ .num_resources = ARRAY_SIZE(timberdale_dma_resources),
+ .resources = timberdale_dma_resources,
+ .platform_data = &timb_dma_platform_data,
+ .data_size = sizeof(timb_dma_platform_data),
+ },
+ {
.name = "timb-uart",
.num_resources = ARRAY_SIZE(timberdale_uart_resources),
.resources = timberdale_uart_resources,
},
{
+ .name = "xiic-i2c",
+ .num_resources = ARRAY_SIZE(timberdale_xiic_resources),
+ .resources = timberdale_xiic_resources,
+ .platform_data = &timberdale_xiic_platform_data,
+ .data_size = sizeof(timberdale_xiic_platform_data),
+ },
+ {
.name = "timb-gpio",
.num_resources = ARRAY_SIZE(timberdale_gpio_resources),
.resources = timberdale_gpio_resources,
@@ -295,14 +390,16 @@
.num_resources = ARRAY_SIZE(timberdale_eth_resources),
.resources = timberdale_eth_resources,
},
+};
+
+static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg1[] = {
{
.name = "timb-dma",
.num_resources = ARRAY_SIZE(timberdale_dma_resources),
.resources = timberdale_dma_resources,
+ .platform_data = &timb_dma_platform_data,
+ .data_size = sizeof(timb_dma_platform_data),
},
-};
-
-static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg1[] = {
{
.name = "timb-uart",
.num_resources = ARRAY_SIZE(timberdale_uart_resources),
@@ -314,6 +411,13 @@
.resources = timberdale_uartlite_resources,
},
{
+ .name = "xiic-i2c",
+ .num_resources = ARRAY_SIZE(timberdale_xiic_resources),
+ .resources = timberdale_xiic_resources,
+ .platform_data = &timberdale_xiic_platform_data,
+ .data_size = sizeof(timberdale_xiic_platform_data),
+ },
+ {
.name = "timb-gpio",
.num_resources = ARRAY_SIZE(timberdale_gpio_resources),
.resources = timberdale_gpio_resources,
@@ -344,20 +448,29 @@
.num_resources = ARRAY_SIZE(timberdale_eth_resources),
.resources = timberdale_eth_resources,
},
- {
- .name = "timb-dma",
- .num_resources = ARRAY_SIZE(timberdale_dma_resources),
- .resources = timberdale_dma_resources,
- },
};
static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg2[] = {
{
+ .name = "timb-dma",
+ .num_resources = ARRAY_SIZE(timberdale_dma_resources),
+ .resources = timberdale_dma_resources,
+ .platform_data = &timb_dma_platform_data,
+ .data_size = sizeof(timb_dma_platform_data),
+ },
+ {
.name = "timb-uart",
.num_resources = ARRAY_SIZE(timberdale_uart_resources),
.resources = timberdale_uart_resources,
},
{
+ .name = "xiic-i2c",
+ .num_resources = ARRAY_SIZE(timberdale_xiic_resources),
+ .resources = timberdale_xiic_resources,
+ .platform_data = &timberdale_xiic_platform_data,
+ .data_size = sizeof(timberdale_xiic_platform_data),
+ },
+ {
.name = "timb-gpio",
.num_resources = ARRAY_SIZE(timberdale_gpio_resources),
.resources = timberdale_gpio_resources,
@@ -378,14 +491,16 @@
.platform_data = &timberdale_xspi_platform_data,
.data_size = sizeof(timberdale_xspi_platform_data),
},
+};
+
+static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg3[] = {
{
.name = "timb-dma",
.num_resources = ARRAY_SIZE(timberdale_dma_resources),
.resources = timberdale_dma_resources,
+ .platform_data = &timb_dma_platform_data,
+ .data_size = sizeof(timb_dma_platform_data),
},
-};
-
-static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg3[] = {
{
.name = "timb-uart",
.num_resources = ARRAY_SIZE(timberdale_uart_resources),
@@ -424,11 +539,6 @@
.num_resources = ARRAY_SIZE(timberdale_eth_resources),
.resources = timberdale_eth_resources,
},
- {
- .name = "timb-dma",
- .num_resources = ARRAY_SIZE(timberdale_dma_resources),
- .resources = timberdale_dma_resources,
- },
};
static const __devinitconst struct resource timberdale_sdhc_resources[] = {
diff --git a/drivers/mfd/timberdale.h b/drivers/mfd/timberdale.h
index 8d27ffa..c11bf6e 100644
--- a/drivers/mfd/timberdale.h
+++ b/drivers/mfd/timberdale.h
@@ -23,7 +23,7 @@
#ifndef MFD_TIMBERDALE_H
#define MFD_TIMBERDALE_H
-#define DRV_VERSION "0.1"
+#define DRV_VERSION "0.2"
/* This driver only support versions >= 3.8 and < 4.0 */
#define TIMB_SUPPORTED_MAJOR 3
@@ -66,7 +66,7 @@
#define CHIPCTLOFFSET 0x800
#define CHIPCTLEND 0x8ff
-#define CHIPCTLSIZE (CHIPCTLEND - CHIPCTLOFFSET)
+#define CHIPCTLSIZE (CHIPCTLEND - CHIPCTLOFFSET + 1)
#define INTCOFFSET 0xc00
#define INTCEND 0xfff
@@ -127,4 +127,16 @@
#define GPIO_PIN_BT_RST 15
#define GPIO_NR_PINS 16
+/* DMA Channels */
+#define DMA_UART_RX 0
+#define DMA_UART_TX 1
+#define DMA_MLB_RX 2
+#define DMA_MLB_TX 3
+#define DMA_VIDEO_RX 4
+#define DMA_VIDEO_DROP 5
+#define DMA_SDHCI_RX 6
+#define DMA_SDHCI_TX 7
+#define DMA_ETH_RX 8
+#define DMA_ETH_TX 9
+
#endif
diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c
index e595530..d0016b6 100644
--- a/drivers/mfd/tps65010.c
+++ b/drivers/mfd/tps65010.c
@@ -531,7 +531,6 @@
flush_scheduled_work();
debugfs_remove(tps->file);
kfree(tps);
- i2c_set_clientdata(client, NULL);
the_tps = NULL;
return 0;
}
diff --git a/drivers/mfd/tps6507x.c b/drivers/mfd/tps6507x.c
new file mode 100644
index 0000000..d859dff
--- /dev/null
+++ b/drivers/mfd/tps6507x.c
@@ -0,0 +1,159 @@
+/*
+ * tps6507x.c -- TPS6507x chip family multi-function driver
+ *
+ * Copyright (c) 2010 RidgeRun (todd.fischer@ridgerun.com)
+ *
+ * Author: Todd Fischer
+ * todd.fischer@ridgerun.com
+ *
+ * Credits:
+ *
+ * Using code from wm831x-*.c, wm8400-core, Wolfson Microelectronics PLC.
+ *
+ * For licencing details see kernel-base/COPYING
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tps6507x.h>
+
+static struct mfd_cell tps6507x_devs[] = {
+ {
+ .name = "tps6507x-pmic",
+ },
+ {
+ .name = "tps6507x-ts",
+ },
+};
+
+
+static int tps6507x_i2c_read_device(struct tps6507x_dev *tps6507x, char reg,
+ int bytes, void *dest)
+{
+ struct i2c_client *i2c = tps6507x->i2c_client;
+ struct i2c_msg xfer[2];
+ int ret;
+
+ /* Write register */
+ xfer[0].addr = i2c->addr;
+ xfer[0].flags = 0;
+ xfer[0].len = 1;
+ xfer[0].buf = ®
+
+ /* Read data */
+ xfer[1].addr = i2c->addr;
+ xfer[1].flags = I2C_M_RD;
+ xfer[1].len = bytes;
+ xfer[1].buf = dest;
+
+ ret = i2c_transfer(i2c->adapter, xfer, 2);
+ if (ret == 2)
+ ret = 0;
+ else if (ret >= 0)
+ ret = -EIO;
+
+ return ret;
+}
+
+static int tps6507x_i2c_write_device(struct tps6507x_dev *tps6507x, char reg,
+ int bytes, void *src)
+{
+ struct i2c_client *i2c = tps6507x->i2c_client;
+ /* we add 1 byte for device register */
+ u8 msg[TPS6507X_MAX_REGISTER + 1];
+ int ret;
+
+ if (bytes > (TPS6507X_MAX_REGISTER + 1))
+ return -EINVAL;
+
+ msg[0] = reg;
+ memcpy(&msg[1], src, bytes);
+
+ ret = i2c_master_send(i2c, msg, bytes + 1);
+ if (ret < 0)
+ return ret;
+ if (ret != bytes + 1)
+ return -EIO;
+ return 0;
+}
+
+static int tps6507x_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct tps6507x_dev *tps6507x;
+ int ret = 0;
+
+ tps6507x = kzalloc(sizeof(struct tps6507x_dev), GFP_KERNEL);
+ if (tps6507x == NULL) {
+ kfree(i2c);
+ return -ENOMEM;
+ }
+
+ i2c_set_clientdata(i2c, tps6507x);
+ tps6507x->dev = &i2c->dev;
+ tps6507x->i2c_client = i2c;
+ tps6507x->read_dev = tps6507x_i2c_read_device;
+ tps6507x->write_dev = tps6507x_i2c_write_device;
+
+ ret = mfd_add_devices(tps6507x->dev, -1,
+ tps6507x_devs, ARRAY_SIZE(tps6507x_devs),
+ NULL, 0);
+
+ if (ret < 0)
+ goto err;
+
+ return ret;
+
+err:
+ mfd_remove_devices(tps6507x->dev);
+ kfree(tps6507x);
+ return ret;
+}
+
+static int tps6507x_i2c_remove(struct i2c_client *i2c)
+{
+ struct tps6507x_dev *tps6507x = i2c_get_clientdata(i2c);
+
+ mfd_remove_devices(tps6507x->dev);
+ kfree(tps6507x);
+
+ return 0;
+}
+
+static const struct i2c_device_id tps6507x_i2c_id[] = {
+ { "tps6507x", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tps6507x_i2c_id);
+
+
+static struct i2c_driver tps6507x_i2c_driver = {
+ .driver = {
+ .name = "tps6507x",
+ .owner = THIS_MODULE,
+ },
+ .probe = tps6507x_i2c_probe,
+ .remove = tps6507x_i2c_remove,
+ .id_table = tps6507x_i2c_id,
+};
+
+static int __init tps6507x_i2c_init(void)
+{
+ return i2c_add_driver(&tps6507x_i2c_driver);
+}
+/* init early so consumer devices can complete system boot */
+subsys_initcall(tps6507x_i2c_init);
+
+static void __exit tps6507x_i2c_exit(void)
+{
+ i2c_del_driver(&tps6507x_i2c_driver);
+}
+module_exit(tps6507x_i2c_exit);
+
+MODULE_DESCRIPTION("TPS6507x chip family multi-function driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index 202bdd5..097f24d 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -232,10 +232,11 @@
},
[6] = {
/*
- * ACI doesn't use the same SIH organization.
- * For example, it supports only one interrupt line
+ * ECI/DBI doesn't use the same SIH organization.
+ * For example, it supports only one interrupt output line.
+ * That is, the interrupts are seen on both INT1 and INT2 lines.
*/
- .name = "aci",
+ .name = "eci_dbi",
.module = TWL5031_MODULE_ACCESSORY,
.bits = 9,
.bytes_ixr = 2,
@@ -247,8 +248,8 @@
},
[7] = {
- /* Accessory */
- .name = "acc",
+ /* Audio accessory */
+ .name = "audio",
.module = TWL5031_MODULE_ACCESSORY,
.control_offset = TWL5031_ACCSIHCTRL,
.bits = 2,
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index f2ab025..1a968f3 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -322,7 +322,11 @@
*/
int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
{
- int ret, src;
+ int ret, src, irq_masked, timeout;
+
+ /* Are we using the interrupt? */
+ irq_masked = wm831x_reg_read(wm831x, WM831X_INTERRUPT_STATUS_1_MASK);
+ irq_masked &= WM831X_AUXADC_DATA_EINT;
mutex_lock(&wm831x->auxadc_lock);
@@ -342,6 +346,9 @@
goto out;
}
+ /* Clear any notification from a very late arriving interrupt */
+ try_wait_for_completion(&wm831x->auxadc_done);
+
ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
WM831X_AUX_CVT_ENA, WM831X_AUX_CVT_ENA);
if (ret < 0) {
@@ -349,22 +356,46 @@
goto disable;
}
- /* If an interrupt arrived late clean up after it */
- try_wait_for_completion(&wm831x->auxadc_done);
+ if (irq_masked) {
+ /* If we're not using interrupts then poll the
+ * interrupt status register */
+ timeout = 5;
+ while (timeout) {
+ msleep(1);
- /* Ignore the result to allow us to soldier on without IRQ hookup */
- wait_for_completion_timeout(&wm831x->auxadc_done, msecs_to_jiffies(5));
+ ret = wm831x_reg_read(wm831x,
+ WM831X_INTERRUPT_STATUS_1);
+ if (ret < 0) {
+ dev_err(wm831x->dev,
+ "ISR 1 read failed: %d\n", ret);
+ goto disable;
+ }
- ret = wm831x_reg_read(wm831x, WM831X_AUXADC_CONTROL);
- if (ret < 0) {
- dev_err(wm831x->dev, "AUXADC status read failed: %d\n", ret);
- goto disable;
- }
-
- if (ret & WM831X_AUX_CVT_ENA) {
- dev_err(wm831x->dev, "Timed out reading AUXADC\n");
- ret = -EBUSY;
- goto disable;
+ /* Did it complete? */
+ if (ret & WM831X_AUXADC_DATA_EINT) {
+ wm831x_reg_write(wm831x,
+ WM831X_INTERRUPT_STATUS_1,
+ WM831X_AUXADC_DATA_EINT);
+ break;
+ } else {
+ dev_err(wm831x->dev,
+ "AUXADC conversion timeout\n");
+ ret = -EBUSY;
+ goto disable;
+ }
+ }
+ } else {
+ /* If we are using interrupts then wait for the
+ * interrupt to complete. Use an extremely long
+ * timeout to handle situations with heavy load where
+ * the notification of the interrupt may be delayed by
+ * threaded IRQ handling. */
+ if (!wait_for_completion_timeout(&wm831x->auxadc_done,
+ msecs_to_jiffies(500))) {
+ dev_err(wm831x->dev, "Timed out waiting for AUXADC\n");
+ ret = -EBUSY;
+ goto disable;
+ }
}
ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
@@ -1463,6 +1494,7 @@
case WM8310:
parent = WM8310;
wm831x->num_gpio = 16;
+ wm831x->charger_irq_wake = 1;
if (rev > 0) {
wm831x->has_gpio_ena = 1;
wm831x->has_cs_sts = 1;
@@ -1474,6 +1506,7 @@
case WM8311:
parent = WM8311;
wm831x->num_gpio = 16;
+ wm831x->charger_irq_wake = 1;
if (rev > 0) {
wm831x->has_gpio_ena = 1;
wm831x->has_cs_sts = 1;
@@ -1485,6 +1518,7 @@
case WM8312:
parent = WM8312;
wm831x->num_gpio = 16;
+ wm831x->charger_irq_wake = 1;
if (rev > 0) {
wm831x->has_gpio_ena = 1;
wm831x->has_cs_sts = 1;
@@ -1623,6 +1657,42 @@
kfree(wm831x);
}
+static int wm831x_device_suspend(struct wm831x *wm831x)
+{
+ int reg, mask;
+
+ /* If the charger IRQs are a wake source then make sure we ack
+ * them even if they're not actively being used (eg, no power
+ * driver or no IRQ line wired up) then acknowledge the
+ * interrupts otherwise suspend won't last very long.
+ */
+ if (wm831x->charger_irq_wake) {
+ reg = wm831x_reg_read(wm831x, WM831X_INTERRUPT_STATUS_2_MASK);
+
+ mask = WM831X_CHG_BATT_HOT_EINT |
+ WM831X_CHG_BATT_COLD_EINT |
+ WM831X_CHG_BATT_FAIL_EINT |
+ WM831X_CHG_OV_EINT | WM831X_CHG_END_EINT |
+ WM831X_CHG_TO_EINT | WM831X_CHG_MODE_EINT |
+ WM831X_CHG_START_EINT;
+
+ /* If any of the interrupts are masked read the statuses */
+ if (reg & mask)
+ reg = wm831x_reg_read(wm831x,
+ WM831X_INTERRUPT_STATUS_2);
+
+ if (reg & mask) {
+ dev_info(wm831x->dev,
+ "Acknowledging masked charger IRQs: %x\n",
+ reg & mask);
+ wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_2,
+ reg & mask);
+ }
+ }
+
+ return 0;
+}
+
static int wm831x_i2c_read_device(struct wm831x *wm831x, unsigned short reg,
int bytes, void *dest)
{
@@ -1697,6 +1767,13 @@
return 0;
}
+static int wm831x_i2c_suspend(struct i2c_client *i2c, pm_message_t mesg)
+{
+ struct wm831x *wm831x = i2c_get_clientdata(i2c);
+
+ return wm831x_device_suspend(wm831x);
+}
+
static const struct i2c_device_id wm831x_i2c_id[] = {
{ "wm8310", WM8310 },
{ "wm8311", WM8311 },
@@ -1714,6 +1791,7 @@
},
.probe = wm831x_i2c_probe,
.remove = wm831x_i2c_remove,
+ .suspend = wm831x_i2c_suspend,
.id_table = wm831x_i2c_id,
};
diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
index 4c1122c..7dabe4d 100644
--- a/drivers/mfd/wm831x-irq.c
+++ b/drivers/mfd/wm831x-irq.c
@@ -39,8 +39,6 @@
int primary;
int reg;
int mask;
- irq_handler_t handler;
- void *handler_data;
};
static struct wm831x_irq_data wm831x_irqs[] = {
@@ -492,6 +490,14 @@
mutex_init(&wm831x->irq_lock);
+ /* Mask the individual interrupt sources */
+ for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) {
+ wm831x->irq_masks_cur[i] = 0xffff;
+ wm831x->irq_masks_cache[i] = 0xffff;
+ wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1_MASK + i,
+ 0xffff);
+ }
+
if (!irq) {
dev_warn(wm831x->dev,
"No interrupt specified - functionality limited\n");
@@ -507,14 +513,6 @@
wm831x->irq = irq;
wm831x->irq_base = pdata->irq_base;
- /* Mask the individual interrupt sources */
- for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) {
- wm831x->irq_masks_cur[i] = 0xffff;
- wm831x->irq_masks_cache[i] = 0xffff;
- wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1_MASK + i,
- 0xffff);
- }
-
/* Register them with genirq */
for (cur_irq = wm831x->irq_base;
cur_irq < ARRAY_SIZE(wm831x_irqs) + wm831x->irq_base;
diff --git a/drivers/mfd/wm8350-i2c.c b/drivers/mfd/wm8350-i2c.c
index 65830f5..5fe5de1 100644
--- a/drivers/mfd/wm8350-i2c.c
+++ b/drivers/mfd/wm8350-i2c.c
@@ -64,10 +64,8 @@
int ret = 0;
wm8350 = kzalloc(sizeof(struct wm8350), GFP_KERNEL);
- if (wm8350 == NULL) {
- kfree(i2c);
+ if (wm8350 == NULL)
return -ENOMEM;
- }
i2c_set_clientdata(i2c, wm8350);
wm8350->dev = &i2c->dev;
diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c
index 865ce01..1bfef48 100644
--- a/drivers/mfd/wm8400-core.c
+++ b/drivers/mfd/wm8400-core.c
@@ -118,7 +118,7 @@
{
int i, ret = 0;
- BUG_ON(reg + num_regs - 1 > ARRAY_SIZE(wm8400->reg_cache));
+ BUG_ON(reg + num_regs > ARRAY_SIZE(wm8400->reg_cache));
/* If there are any volatile reads then read back the entire block */
for (i = reg; i < reg + num_regs; i++)
@@ -144,7 +144,7 @@
{
int ret, i;
- BUG_ON(reg + num_regs - 1 > ARRAY_SIZE(wm8400->reg_cache));
+ BUG_ON(reg + num_regs > ARRAY_SIZE(wm8400->reg_cache));
for (i = 0; i < num_regs; i++) {
BUG_ON(!reg_data[reg + i].writable);
@@ -415,7 +415,6 @@
return 0;
struct_err:
- i2c_set_clientdata(i2c, NULL);
kfree(wm8400);
err:
return ret;
@@ -426,7 +425,6 @@
struct wm8400 *wm8400 = i2c_get_clientdata(i2c);
wm8400_release(wm8400);
- i2c_set_clientdata(i2c, NULL);
kfree(wm8400);
return 0;
diff --git a/drivers/misc/cs5535-mfgpt.c b/drivers/misc/cs5535-mfgpt.c
index 9bec24d..2d44b33 100644
--- a/drivers/misc/cs5535-mfgpt.c
+++ b/drivers/misc/cs5535-mfgpt.c
@@ -366,6 +366,6 @@
module_init(cs5535_mfgpt_init);
-MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>");
+MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
MODULE_DESCRIPTION("CS5535/CS5536 MFGPT timer driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index f7ca3a4..559b0b3 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -643,7 +643,6 @@
kfree(at24->writebuf);
kfree(at24);
- i2c_set_clientdata(client, NULL);
return 0;
}
diff --git a/drivers/misc/lkdtm.c b/drivers/misc/lkdtm.c
index 31a9911..5bfb2a2 100644
--- a/drivers/misc/lkdtm.c
+++ b/drivers/misc/lkdtm.c
@@ -75,6 +75,9 @@
UNALIGNED_LOAD_STORE_WRITE,
OVERWRITE_ALLOCATION,
WRITE_AFTER_FREE,
+ SOFTLOCKUP,
+ HARDLOCKUP,
+ HUNG_TASK,
};
static char* cp_name[] = {
@@ -99,6 +102,9 @@
"UNALIGNED_LOAD_STORE_WRITE",
"OVERWRITE_ALLOCATION",
"WRITE_AFTER_FREE",
+ "SOFTLOCKUP",
+ "HARDLOCKUP",
+ "HUNG_TASK",
};
static struct jprobe lkdtm;
@@ -320,6 +326,20 @@
memset(data, 0x78, len);
break;
}
+ case SOFTLOCKUP:
+ preempt_disable();
+ for (;;)
+ cpu_relax();
+ break;
+ case HARDLOCKUP:
+ local_irq_disable();
+ for (;;)
+ cpu_relax();
+ break;
+ case HUNG_TASK:
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule();
+ break;
case NONE:
default:
break;
diff --git a/drivers/misc/vmware_balloon.c b/drivers/misc/vmware_balloon.c
index db9cd02..2a1e804 100644
--- a/drivers/misc/vmware_balloon.c
+++ b/drivers/misc/vmware_balloon.c
@@ -45,7 +45,7 @@
MODULE_AUTHOR("VMware, Inc.");
MODULE_DESCRIPTION("VMware Memory Control (Balloon) Driver");
-MODULE_VERSION("1.2.1.0-K");
+MODULE_VERSION("1.2.1.1-k");
MODULE_ALIAS("dmi:*:svnVMware*:*");
MODULE_ALIAS("vmware_vmmemctl");
MODULE_LICENSE("GPL");
@@ -101,6 +101,8 @@
/* Maximum number of page allocations without yielding processor */
#define VMW_BALLOON_YIELD_THRESHOLD 1024
+/* Maximum number of refused pages we accumulate during inflation cycle */
+#define VMW_BALLOON_MAX_REFUSED 16
/*
* Hypervisor communication port definitions.
@@ -183,6 +185,7 @@
/* transient list of non-balloonable pages */
struct list_head refused_pages;
+ unsigned int n_refused_pages;
/* balloon size in pages */
unsigned int size;
@@ -428,14 +431,21 @@
/* inform monitor */
locked = vmballoon_send_lock_page(b, page_to_pfn(page));
if (!locked) {
+ STATS_INC(b->stats.refused_alloc);
+
if (b->reset_required) {
__free_page(page);
return -EIO;
}
- /* place on list of non-balloonable pages, retry allocation */
+ /*
+ * Place page on the list of non-balloonable pages
+ * and retry allocation, unless we already accumulated
+ * too many of them, in which case take a breather.
+ */
list_add(&page->lru, &b->refused_pages);
- STATS_INC(b->stats.refused_alloc);
+ if (++b->n_refused_pages >= VMW_BALLOON_MAX_REFUSED)
+ return -EIO;
}
} while (!locked);
@@ -483,6 +493,8 @@
__free_page(page);
STATS_INC(b->stats.refused_free);
}
+
+ b->n_refused_pages = 0;
}
/*
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 3168ebd..569e94d 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1252,9 +1252,8 @@
/**
* mmc_suspend_host - suspend a host
* @host: mmc host
- * @state: suspend mode (PM_SUSPEND_xxx)
*/
-int mmc_suspend_host(struct mmc_host *host, pm_message_t state)
+int mmc_suspend_host(struct mmc_host *host)
{
int err = 0;
diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
index 0d96080..63772e7 100644
--- a/drivers/mmc/core/sd_ops.c
+++ b/drivers/mmc/core/sd_ops.c
@@ -79,8 +79,6 @@
* we cannot use the retries field in mmc_command.
*/
for (i = 0;i <= retries;i++) {
- memset(&mrq, 0, sizeof(struct mmc_request));
-
err = mmc_app_cmd(host, card);
if (err) {
/* no point in retrying; no APP commands allowed */
diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c
index ff27c8c..0f687cd 100644
--- a/drivers/mmc/core/sdio_io.c
+++ b/drivers/mmc/core/sdio_io.c
@@ -406,6 +406,36 @@
EXPORT_SYMBOL_GPL(sdio_writeb);
/**
+ * sdio_writeb_readb - write and read a byte from SDIO function
+ * @func: SDIO function to access
+ * @write_byte: byte to write
+ * @addr: address to write to
+ * @err_ret: optional status value from transfer
+ *
+ * Performs a RAW (Read after Write) operation as defined by SDIO spec -
+ * single byte is written to address space of a given SDIO function and
+ * response is read back from the same address, both using single request.
+ * If there is a problem with the operation, 0xff is returned and
+ * @err_ret will contain the error code.
+ */
+u8 sdio_writeb_readb(struct sdio_func *func, u8 write_byte,
+ unsigned int addr, int *err_ret)
+{
+ int ret;
+ u8 val;
+
+ ret = mmc_io_rw_direct(func->card, 1, func->num, addr,
+ write_byte, &val);
+ if (err_ret)
+ *err_ret = ret;
+ if (ret)
+ val = 0xff;
+
+ return val;
+}
+EXPORT_SYMBOL_GPL(sdio_writeb_readb);
+
+/**
* sdio_memcpy_fromio - read a chunk of memory from a SDIO function
* @func: SDIO function to access
* @dst: buffer to store the data
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 2e13b94..f06d06e 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -136,6 +136,18 @@
If unsure, say N.
+config MMC_SDHCI_SPEAR
+ tristate "SDHCI support on ST SPEAr platform"
+ depends on MMC_SDHCI && PLAT_SPEAR
+ help
+ This selects the Secure Digital Host Controller Interface (SDHCI)
+ often referrered to as the HSMMC block in some of the ST SPEAR range
+ of SoC
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
+
config MMC_SDHCI_S3C_DMA
bool "DMA support on S3C SDHCI"
depends on MMC_SDHCI_S3C && EXPERIMENTAL
@@ -237,7 +249,7 @@
config MMC_MSM7X00A
tristate "Qualcomm MSM 7X00A SDCC Controller Support"
- depends on MMC && ARCH_MSM
+ depends on MMC && ARCH_MSM && !ARCH_MSM7X30
help
This provides support for the SD/MMC cell found in the
MSM 7X00A controllers from Qualcomm.
@@ -412,3 +424,11 @@
depends on SDH_BFIN
help
If you say yes here SD-Cards may work on the EZkit.
+
+config MMC_SH_MMCIF
+ tristate "SuperH Internal MMCIF support"
+ depends on MMC_BLOCK && (SUPERH || ARCH_SHMOBILE)
+ help
+ This selects the MMC Host Interface controler (MMCIF).
+
+ This driver supports MMCIF in sh7724/sh7757/sh7372.
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index f480397..e30c2ee 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -14,6 +14,7 @@
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o
obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o
+obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
obj-$(CONFIG_MMC_OMAP) += omap.o
@@ -34,6 +35,7 @@
obj-$(CONFIG_MMC_CB710) += cb710-mmc.o
obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o
obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o
+obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o
obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o
sdhci-of-y := sdhci-of-core.o
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index 336d9f5..5f3a599 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -1157,7 +1157,7 @@
enable_irq_wake(host->board->det_pin);
if (mmc)
- ret = mmc_suspend_host(mmc, state);
+ ret = mmc_suspend_host(mmc);
return ret;
}
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index df0e8a8..95ef864 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -173,6 +173,7 @@
* @mmc: The mmc_host representing this slot.
* @host: The MMC controller this slot is using.
* @sdc_reg: Value of SDCR to be written before using this slot.
+ * @sdio_irq: SDIO irq mask for this slot.
* @mrq: mmc_request currently being processed or waiting to be
* processed, or NULL when the slot is idle.
* @queue_node: List node for placing this node in the @queue list of
@@ -191,6 +192,7 @@
struct atmel_mci *host;
u32 sdc_reg;
+ u32 sdio_irq;
struct mmc_request *mrq;
struct list_head queue_node;
@@ -792,7 +794,7 @@
mci_writel(host, SDCR, slot->sdc_reg);
iflags = mci_readl(host, IMR);
- if (iflags)
+ if (iflags & ~(MCI_SDIOIRQA | MCI_SDIOIRQB))
dev_warn(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n",
iflags);
@@ -952,10 +954,21 @@
if (mci_has_rwproof())
host->mode_reg |= (MCI_MR_WRPROOF | MCI_MR_RDPROOF);
- if (list_empty(&host->queue))
+ if (atmci_is_mci2()) {
+ /* setup High Speed mode in relation with card capacity */
+ if (ios->timing == MMC_TIMING_SD_HS)
+ host->cfg_reg |= MCI_CFG_HSMODE;
+ else
+ host->cfg_reg &= ~MCI_CFG_HSMODE;
+ }
+
+ if (list_empty(&host->queue)) {
mci_writel(host, MR, host->mode_reg);
- else
+ if (atmci_is_mci2())
+ mci_writel(host, CFG, host->cfg_reg);
+ } else {
host->need_clock_update = true;
+ }
spin_unlock_bh(&host->lock);
} else {
@@ -1030,11 +1043,23 @@
return present;
}
+static void atmci_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+ struct atmel_mci_slot *slot = mmc_priv(mmc);
+ struct atmel_mci *host = slot->host;
+
+ if (enable)
+ mci_writel(host, IER, slot->sdio_irq);
+ else
+ mci_writel(host, IDR, slot->sdio_irq);
+}
+
static const struct mmc_host_ops atmci_ops = {
.request = atmci_request,
.set_ios = atmci_set_ios,
.get_ro = atmci_get_ro,
.get_cd = atmci_get_cd,
+ .enable_sdio_irq = atmci_enable_sdio_irq,
};
/* Called with host->lock held */
@@ -1052,8 +1077,11 @@
* necessary if set_ios() is called when a different slot is
* busy transfering data.
*/
- if (host->need_clock_update)
+ if (host->need_clock_update) {
mci_writel(host, MR, host->mode_reg);
+ if (atmci_is_mci2())
+ mci_writel(host, CFG, host->cfg_reg);
+ }
host->cur_slot->mrq = NULL;
host->mrq = NULL;
@@ -1483,6 +1511,19 @@
tasklet_schedule(&host->tasklet);
}
+static void atmci_sdio_interrupt(struct atmel_mci *host, u32 status)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
+ struct atmel_mci_slot *slot = host->slot[i];
+ if (slot && (status & slot->sdio_irq)) {
+ mmc_signal_sdio_irq(slot->mmc);
+ }
+ }
+}
+
+
static irqreturn_t atmci_interrupt(int irq, void *dev_id)
{
struct atmel_mci *host = dev_id;
@@ -1522,6 +1563,10 @@
if (pending & MCI_CMDRDY)
atmci_cmd_interrupt(host, status);
+
+ if (pending & (MCI_SDIOIRQA | MCI_SDIOIRQB))
+ atmci_sdio_interrupt(host, status);
+
} while (pass_count++ < 5);
return pass_count ? IRQ_HANDLED : IRQ_NONE;
@@ -1544,7 +1589,7 @@
static int __init atmci_init_slot(struct atmel_mci *host,
struct mci_slot_pdata *slot_data, unsigned int id,
- u32 sdc_reg)
+ u32 sdc_reg, u32 sdio_irq)
{
struct mmc_host *mmc;
struct atmel_mci_slot *slot;
@@ -1560,11 +1605,16 @@
slot->wp_pin = slot_data->wp_pin;
slot->detect_is_active_high = slot_data->detect_is_active_high;
slot->sdc_reg = sdc_reg;
+ slot->sdio_irq = sdio_irq;
mmc->ops = &atmci_ops;
mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512);
mmc->f_max = host->bus_hz / 2;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ if (sdio_irq)
+ mmc->caps |= MMC_CAP_SDIO_IRQ;
+ if (atmci_is_mci2())
+ mmc->caps |= MMC_CAP_SD_HIGHSPEED;
if (slot_data->bus_width >= 4)
mmc->caps |= MMC_CAP_4_BIT_DATA;
@@ -1753,13 +1803,13 @@
ret = -ENODEV;
if (pdata->slot[0].bus_width) {
ret = atmci_init_slot(host, &pdata->slot[0],
- 0, MCI_SDCSEL_SLOT_A);
+ 0, MCI_SDCSEL_SLOT_A, MCI_SDIOIRQA);
if (!ret)
nr_slots++;
}
if (pdata->slot[1].bus_width) {
ret = atmci_init_slot(host, &pdata->slot[1],
- 1, MCI_SDCSEL_SLOT_B);
+ 1, MCI_SDCSEL_SLOT_B, MCI_SDIOIRQB);
if (!ret)
nr_slots++;
}
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index f583444..c8da5d3 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -1142,7 +1142,7 @@
struct au1xmmc_host *host = platform_get_drvdata(pdev);
int ret;
- ret = mmc_suspend_host(host->mmc, state);
+ ret = mmc_suspend_host(host->mmc);
if (ret)
return ret;
diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c
index 6919e84..4b0e677 100644
--- a/drivers/mmc/host/bfin_sdh.c
+++ b/drivers/mmc/host/bfin_sdh.c
@@ -576,7 +576,7 @@
int ret = 0;
if (mmc)
- ret = mmc_suspend_host(mmc, state);
+ ret = mmc_suspend_host(mmc);
bfin_write_SDH_PWR_CTL(bfin_read_SDH_PWR_CTL() & ~PWR_ON);
peripheral_free_list(drv_data->pin_req);
diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
index 92a324f..ca3bdc8 100644
--- a/drivers/mmc/host/cb710-mmc.c
+++ b/drivers/mmc/host/cb710-mmc.c
@@ -675,7 +675,7 @@
struct mmc_host *mmc = cb710_slot_to_mmc(slot);
int err;
- err = mmc_suspend_host(mmc, state);
+ err = mmc_suspend_host(mmc);
if (err)
return err;
diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c
index 3bd0ba2..33d9f1b 100644
--- a/drivers/mmc/host/davinci_mmc.c
+++ b/drivers/mmc/host/davinci_mmc.c
@@ -137,15 +137,15 @@
/*
* One scatterlist dma "segment" is at most MAX_CCNT rw_threshold units,
- * and we handle up to NR_SG segments. MMC_BLOCK_BOUNCE kicks in only
+ * and we handle up to MAX_NR_SG segments. MMC_BLOCK_BOUNCE kicks in only
* for drivers with max_hw_segs == 1, making the segments bigger (64KB)
- * than the page or two that's otherwise typical. NR_SG == 16 gives at
- * least the same throughput boost, using EDMA transfer linkage instead
- * of spending CPU time copying pages.
+ * than the page or two that's otherwise typical. nr_sg (passed from
+ * platform data) == 16 gives at least the same throughput boost, using
+ * EDMA transfer linkage instead of spending CPU time copying pages.
*/
#define MAX_CCNT ((1 << 16) - 1)
-#define NR_SG 16
+#define MAX_NR_SG 16
static unsigned rw_threshold = 32;
module_param(rw_threshold, uint, S_IRUGO);
@@ -171,6 +171,7 @@
#define DAVINCI_MMC_DATADIR_READ 1
#define DAVINCI_MMC_DATADIR_WRITE 2
unsigned char data_dir;
+ unsigned char suspended;
/* buffer is used during PIO of one scatterlist segment, and
* is updated along with buffer_bytes_left. bytes_left applies
@@ -192,7 +193,7 @@
struct edmacc_param tx_template;
struct edmacc_param rx_template;
unsigned n_link;
- u32 links[NR_SG - 1];
+ u32 links[MAX_NR_SG - 1];
/* For PIO we walk scatterlists one segment at a time. */
unsigned int sg_len;
@@ -202,6 +203,8 @@
u8 version;
/* for ns in one cycle calculation */
unsigned ns_in_one_cycle;
+ /* Number of sg segments */
+ u8 nr_sg;
#ifdef CONFIG_CPU_FREQ
struct notifier_block freq_transition;
#endif
@@ -568,6 +571,7 @@
static int __init davinci_acquire_dma_channels(struct mmc_davinci_host *host)
{
+ u32 link_size;
int r, i;
/* Acquire master DMA write channel */
@@ -593,7 +597,8 @@
/* Allocate parameter RAM slots, which will later be bound to a
* channel as needed to handle a scatterlist.
*/
- for (i = 0; i < ARRAY_SIZE(host->links); i++) {
+ link_size = min_t(unsigned, host->nr_sg, ARRAY_SIZE(host->links));
+ for (i = 0; i < link_size; i++) {
r = edma_alloc_slot(EDMA_CTLR(host->txdma), EDMA_SLOT_ANY);
if (r < 0) {
dev_dbg(mmc_dev(host->mmc), "dma PaRAM alloc --> %d\n",
@@ -905,19 +910,26 @@
}
}
-static void
-davinci_abort_data(struct mmc_davinci_host *host, struct mmc_data *data)
+static inline void mmc_davinci_reset_ctrl(struct mmc_davinci_host *host,
+ int val)
{
u32 temp;
- /* reset command and data state machines */
temp = readl(host->base + DAVINCI_MMCCTL);
- writel(temp | MMCCTL_CMDRST | MMCCTL_DATRST,
- host->base + DAVINCI_MMCCTL);
+ if (val) /* reset */
+ temp |= MMCCTL_CMDRST | MMCCTL_DATRST;
+ else /* enable */
+ temp &= ~(MMCCTL_CMDRST | MMCCTL_DATRST);
- temp &= ~(MMCCTL_CMDRST | MMCCTL_DATRST);
- udelay(10);
writel(temp, host->base + DAVINCI_MMCCTL);
+ udelay(10);
+}
+
+static void
+davinci_abort_data(struct mmc_davinci_host *host, struct mmc_data *data)
+{
+ mmc_davinci_reset_ctrl(host, 1);
+ mmc_davinci_reset_ctrl(host, 0);
}
static irqreturn_t mmc_davinci_irq(int irq, void *dev_id)
@@ -1121,15 +1133,8 @@
#endif
static void __init init_mmcsd_host(struct mmc_davinci_host *host)
{
- /* DAT line portion is diabled and in reset state */
- writel(readl(host->base + DAVINCI_MMCCTL) | MMCCTL_DATRST,
- host->base + DAVINCI_MMCCTL);
- /* CMD line portion is diabled and in reset state */
- writel(readl(host->base + DAVINCI_MMCCTL) | MMCCTL_CMDRST,
- host->base + DAVINCI_MMCCTL);
-
- udelay(10);
+ mmc_davinci_reset_ctrl(host, 1);
writel(0, host->base + DAVINCI_MMCCLK);
writel(MMCCLK_CLKEN, host->base + DAVINCI_MMCCLK);
@@ -1137,12 +1142,7 @@
writel(0x1FFF, host->base + DAVINCI_MMCTOR);
writel(0xFFFF, host->base + DAVINCI_MMCTOD);
- writel(readl(host->base + DAVINCI_MMCCTL) & ~MMCCTL_DATRST,
- host->base + DAVINCI_MMCCTL);
- writel(readl(host->base + DAVINCI_MMCCTL) & ~MMCCTL_CMDRST,
- host->base + DAVINCI_MMCCTL);
-
- udelay(10);
+ mmc_davinci_reset_ctrl(host, 0);
}
static int __init davinci_mmcsd_probe(struct platform_device *pdev)
@@ -1202,6 +1202,12 @@
init_mmcsd_host(host);
+ if (pdata->nr_sg)
+ host->nr_sg = pdata->nr_sg - 1;
+
+ if (host->nr_sg > MAX_NR_SG || !host->nr_sg)
+ host->nr_sg = MAX_NR_SG;
+
host->use_dma = use_dma;
host->irq = irq;
@@ -1327,32 +1333,65 @@
}
#ifdef CONFIG_PM
-static int davinci_mmcsd_suspend(struct platform_device *pdev, pm_message_t msg)
+static int davinci_mmcsd_suspend(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct mmc_davinci_host *host = platform_get_drvdata(pdev);
+ int ret;
- return mmc_suspend_host(host->mmc, msg);
+ mmc_host_enable(host->mmc);
+ ret = mmc_suspend_host(host->mmc);
+ if (!ret) {
+ writel(0, host->base + DAVINCI_MMCIM);
+ mmc_davinci_reset_ctrl(host, 1);
+ mmc_host_disable(host->mmc);
+ clk_disable(host->clk);
+ host->suspended = 1;
+ } else {
+ host->suspended = 0;
+ mmc_host_disable(host->mmc);
+ }
+
+ return ret;
}
-static int davinci_mmcsd_resume(struct platform_device *pdev)
+static int davinci_mmcsd_resume(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct mmc_davinci_host *host = platform_get_drvdata(pdev);
+ int ret;
- return mmc_resume_host(host->mmc);
+ if (!host->suspended)
+ return 0;
+
+ clk_enable(host->clk);
+ mmc_host_enable(host->mmc);
+
+ mmc_davinci_reset_ctrl(host, 0);
+ ret = mmc_resume_host(host->mmc);
+ if (!ret)
+ host->suspended = 0;
+
+ return ret;
}
+
+static const struct dev_pm_ops davinci_mmcsd_pm = {
+ .suspend = davinci_mmcsd_suspend,
+ .resume = davinci_mmcsd_resume,
+};
+
+#define davinci_mmcsd_pm_ops (&davinci_mmcsd_pm)
#else
-#define davinci_mmcsd_suspend NULL
-#define davinci_mmcsd_resume NULL
+#define davinci_mmcsd_pm_ops NULL
#endif
static struct platform_driver davinci_mmcsd_driver = {
.driver = {
.name = "davinci_mmc",
.owner = THIS_MODULE,
+ .pm = davinci_mmcsd_pm_ops,
},
.remove = __exit_p(davinci_mmcsd_remove),
- .suspend = davinci_mmcsd_suspend,
- .resume = davinci_mmcsd_resume,
};
static int __init davinci_mmcsd_init(void)
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index bf98d7c..9a68ff4 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -1115,7 +1115,7 @@
int ret = 0;
if (mmc)
- ret = mmc_suspend_host(mmc, state);
+ ret = mmc_suspend_host(mmc);
return ret;
}
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index ff115d9..4917af9 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -824,7 +824,7 @@
if (mmc) {
struct mmci_host *host = mmc_priv(mmc);
- ret = mmc_suspend_host(mmc, state);
+ ret = mmc_suspend_host(mmc);
if (ret == 0)
writel(0, host->base + MMCIMASK0);
}
diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c
index 61f1d27..24e0945 100644
--- a/drivers/mmc/host/msm_sdcc.c
+++ b/drivers/mmc/host/msm_sdcc.c
@@ -1327,7 +1327,7 @@
disable_irq(host->stat_irq);
if (mmc->card && mmc->card->type != MMC_TYPE_SDIO)
- rc = mmc_suspend_host(mmc, state);
+ rc = mmc_suspend_host(mmc);
if (!rc)
msmsdcc_writel(host, 0, MMCIMASK0);
if (host->clks_on)
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index 34e2348..366eefa 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -865,7 +865,7 @@
int ret = 0;
if (mmc)
- ret = mmc_suspend_host(mmc, state);
+ ret = mmc_suspend_host(mmc);
return ret;
}
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index ec18e3b..d9d4a72 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -932,7 +932,7 @@
int ret = 0;
if (mmc)
- ret = mmc_suspend_host(mmc, state);
+ ret = mmc_suspend_host(mmc);
return ret;
}
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 84d2804..d98ddcf 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -39,30 +39,30 @@
#include <plat/fpga.h>
#define OMAP_MMC_REG_CMD 0x00
-#define OMAP_MMC_REG_ARGL 0x04
-#define OMAP_MMC_REG_ARGH 0x08
-#define OMAP_MMC_REG_CON 0x0c
-#define OMAP_MMC_REG_STAT 0x10
-#define OMAP_MMC_REG_IE 0x14
-#define OMAP_MMC_REG_CTO 0x18
-#define OMAP_MMC_REG_DTO 0x1c
-#define OMAP_MMC_REG_DATA 0x20
-#define OMAP_MMC_REG_BLEN 0x24
-#define OMAP_MMC_REG_NBLK 0x28
-#define OMAP_MMC_REG_BUF 0x2c
-#define OMAP_MMC_REG_SDIO 0x34
-#define OMAP_MMC_REG_REV 0x3c
-#define OMAP_MMC_REG_RSP0 0x40
-#define OMAP_MMC_REG_RSP1 0x44
-#define OMAP_MMC_REG_RSP2 0x48
-#define OMAP_MMC_REG_RSP3 0x4c
-#define OMAP_MMC_REG_RSP4 0x50
-#define OMAP_MMC_REG_RSP5 0x54
-#define OMAP_MMC_REG_RSP6 0x58
-#define OMAP_MMC_REG_RSP7 0x5c
-#define OMAP_MMC_REG_IOSR 0x60
-#define OMAP_MMC_REG_SYSC 0x64
-#define OMAP_MMC_REG_SYSS 0x68
+#define OMAP_MMC_REG_ARGL 0x01
+#define OMAP_MMC_REG_ARGH 0x02
+#define OMAP_MMC_REG_CON 0x03
+#define OMAP_MMC_REG_STAT 0x04
+#define OMAP_MMC_REG_IE 0x05
+#define OMAP_MMC_REG_CTO 0x06
+#define OMAP_MMC_REG_DTO 0x07
+#define OMAP_MMC_REG_DATA 0x08
+#define OMAP_MMC_REG_BLEN 0x09
+#define OMAP_MMC_REG_NBLK 0x0a
+#define OMAP_MMC_REG_BUF 0x0b
+#define OMAP_MMC_REG_SDIO 0x0d
+#define OMAP_MMC_REG_REV 0x0f
+#define OMAP_MMC_REG_RSP0 0x10
+#define OMAP_MMC_REG_RSP1 0x11
+#define OMAP_MMC_REG_RSP2 0x12
+#define OMAP_MMC_REG_RSP3 0x13
+#define OMAP_MMC_REG_RSP4 0x14
+#define OMAP_MMC_REG_RSP5 0x15
+#define OMAP_MMC_REG_RSP6 0x16
+#define OMAP_MMC_REG_RSP7 0x17
+#define OMAP_MMC_REG_IOSR 0x18
+#define OMAP_MMC_REG_SYSC 0x19
+#define OMAP_MMC_REG_SYSS 0x1a
#define OMAP_MMC_STAT_CARD_ERR (1 << 14)
#define OMAP_MMC_STAT_CARD_IRQ (1 << 13)
@@ -78,8 +78,9 @@
#define OMAP_MMC_STAT_CARD_BUSY (1 << 2)
#define OMAP_MMC_STAT_END_OF_CMD (1 << 0)
-#define OMAP_MMC_READ(host, reg) __raw_readw((host)->virt_base + OMAP_MMC_REG_##reg)
-#define OMAP_MMC_WRITE(host, reg, val) __raw_writew((val), (host)->virt_base + OMAP_MMC_REG_##reg)
+#define OMAP_MMC_REG(host, reg) (OMAP_MMC_REG_##reg << (host)->reg_shift)
+#define OMAP_MMC_READ(host, reg) __raw_readw((host)->virt_base + OMAP_MMC_REG(host, reg))
+#define OMAP_MMC_WRITE(host, reg, val) __raw_writew((val), (host)->virt_base + OMAP_MMC_REG(host, reg))
/*
* Command types
@@ -133,6 +134,7 @@
int irq;
unsigned char bus_mode;
unsigned char hw_bus_mode;
+ unsigned int reg_shift;
struct work_struct cmd_abort_work;
unsigned abort:1;
@@ -680,9 +682,9 @@
host->data->bytes_xfered += n;
if (write) {
- __raw_writesw(host->virt_base + OMAP_MMC_REG_DATA, host->buffer, n);
+ __raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n);
} else {
- __raw_readsw(host->virt_base + OMAP_MMC_REG_DATA, host->buffer, n);
+ __raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n);
}
}
@@ -900,7 +902,7 @@
int dst_port = 0;
int sync_dev = 0;
- data_addr = host->phys_base + OMAP_MMC_REG_DATA;
+ data_addr = host->phys_base + OMAP_MMC_REG(host, DATA);
frame = data->blksz;
count = sg_dma_len(sg);
@@ -1155,7 +1157,6 @@
mmc_omap_start_command(host, req->cmd);
if (host->dma_in_use)
omap_start_dma(host->dma_ch);
- BUG_ON(irqs_disabled());
}
static void mmc_omap_request(struct mmc_host *mmc, struct mmc_request *req)
@@ -1493,6 +1494,8 @@
}
}
+ host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
+
return 0;
err_plat_cleanup:
@@ -1557,7 +1560,7 @@
struct mmc_omap_slot *slot;
slot = host->slots[i];
- ret = mmc_suspend_host(slot->mmc, mesg);
+ ret = mmc_suspend_host(slot->mmc);
if (ret < 0) {
while (--i >= 0) {
slot = host->slots[i];
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index e9caf69..b032828 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -157,12 +157,10 @@
*/
struct regulator *vcc;
struct regulator *vcc_aux;
- struct semaphore sem;
struct work_struct mmc_carddetect_work;
void __iomem *base;
resource_size_t mapbase;
spinlock_t irq_lock; /* Prevent races with irq handler */
- unsigned long flags;
unsigned int id;
unsigned int dma_len;
unsigned int dma_sg_idx;
@@ -183,6 +181,7 @@
int protect_card;
int reqs_blocked;
int use_reg;
+ int req_in_progress;
struct omap_mmc_platform_data *pdata;
};
@@ -524,6 +523,27 @@
dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n");
}
+static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host)
+{
+ unsigned int irq_mask;
+
+ if (host->use_dma)
+ irq_mask = INT_EN_MASK & ~(BRR_ENABLE | BWR_ENABLE);
+ else
+ irq_mask = INT_EN_MASK;
+
+ OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
+ OMAP_HSMMC_WRITE(host->base, ISE, irq_mask);
+ OMAP_HSMMC_WRITE(host->base, IE, irq_mask);
+}
+
+static void omap_hsmmc_disable_irq(struct omap_hsmmc_host *host)
+{
+ OMAP_HSMMC_WRITE(host->base, ISE, 0);
+ OMAP_HSMMC_WRITE(host->base, IE, 0);
+ OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
+}
+
#ifdef CONFIG_PM
/*
@@ -592,9 +612,7 @@
&& time_before(jiffies, timeout))
;
- OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
- OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK);
- OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
+ omap_hsmmc_disable_irq(host);
/* Do not initialize card-specific things if the power is off */
if (host->power_mode == MMC_POWER_OFF)
@@ -697,6 +715,8 @@
return;
disable_irq(host->irq);
+
+ OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
OMAP_HSMMC_WRITE(host->base, CON,
OMAP_HSMMC_READ(host->base, CON) | INIT_STREAM);
OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD);
@@ -762,17 +782,7 @@
mmc_hostname(host->mmc), cmd->opcode, cmd->arg);
host->cmd = cmd;
- /*
- * Clear status bits and enable interrupts
- */
- OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
- OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK);
-
- if (host->use_dma)
- OMAP_HSMMC_WRITE(host->base, IE,
- INT_EN_MASK & ~(BRR_ENABLE | BWR_ENABLE));
- else
- OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
+ omap_hsmmc_enable_irq(host);
host->response_busy = 0;
if (cmd->flags & MMC_RSP_PRESENT) {
@@ -806,13 +816,7 @@
if (host->use_dma)
cmdreg |= DMA_EN;
- /*
- * In an interrupt context (i.e. STOP command), the spinlock is unlocked
- * by the interrupt handler, otherwise (i.e. for a new request) it is
- * unlocked here.
- */
- if (!in_interrupt())
- spin_unlock_irqrestore(&host->irq_lock, host->flags);
+ host->req_in_progress = 1;
OMAP_HSMMC_WRITE(host->base, ARG, cmd->arg);
OMAP_HSMMC_WRITE(host->base, CMD, cmdreg);
@@ -827,6 +831,23 @@
return DMA_FROM_DEVICE;
}
+static void omap_hsmmc_request_done(struct omap_hsmmc_host *host, struct mmc_request *mrq)
+{
+ int dma_ch;
+
+ spin_lock(&host->irq_lock);
+ host->req_in_progress = 0;
+ dma_ch = host->dma_ch;
+ spin_unlock(&host->irq_lock);
+
+ omap_hsmmc_disable_irq(host);
+ /* Do not complete the request if DMA is still in progress */
+ if (mrq->data && host->use_dma && dma_ch != -1)
+ return;
+ host->mrq = NULL;
+ mmc_request_done(host->mmc, mrq);
+}
+
/*
* Notify the transfer complete to MMC core
*/
@@ -843,25 +864,19 @@
return;
}
- host->mrq = NULL;
- mmc_request_done(host->mmc, mrq);
+ omap_hsmmc_request_done(host, mrq);
return;
}
host->data = NULL;
- if (host->use_dma && host->dma_ch != -1)
- dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
- omap_hsmmc_get_dma_dir(host, data));
-
if (!data->error)
data->bytes_xfered += data->blocks * (data->blksz);
else
data->bytes_xfered = 0;
if (!data->stop) {
- host->mrq = NULL;
- mmc_request_done(host->mmc, data->mrq);
+ omap_hsmmc_request_done(host, data->mrq);
return;
}
omap_hsmmc_start_command(host, data->stop, NULL);
@@ -887,10 +902,8 @@
cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP10);
}
}
- if ((host->data == NULL && !host->response_busy) || cmd->error) {
- host->mrq = NULL;
- mmc_request_done(host->mmc, cmd->mrq);
- }
+ if ((host->data == NULL && !host->response_busy) || cmd->error)
+ omap_hsmmc_request_done(host, cmd->mrq);
}
/*
@@ -898,14 +911,19 @@
*/
static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno)
{
+ int dma_ch;
+
host->data->error = errno;
- if (host->use_dma && host->dma_ch != -1) {
+ spin_lock(&host->irq_lock);
+ dma_ch = host->dma_ch;
+ host->dma_ch = -1;
+ spin_unlock(&host->irq_lock);
+
+ if (host->use_dma && dma_ch != -1) {
dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len,
omap_hsmmc_get_dma_dir(host, host->data));
- omap_free_dma(host->dma_ch);
- host->dma_ch = -1;
- up(&host->sem);
+ omap_free_dma(dma_ch);
}
host->data = NULL;
}
@@ -967,28 +985,21 @@
__func__);
}
-/*
- * MMC controller IRQ handler
- */
-static irqreturn_t omap_hsmmc_irq(int irq, void *dev_id)
+static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status)
{
- struct omap_hsmmc_host *host = dev_id;
struct mmc_data *data;
- int end_cmd = 0, end_trans = 0, status;
+ int end_cmd = 0, end_trans = 0;
- spin_lock(&host->irq_lock);
-
- if (host->mrq == NULL) {
- OMAP_HSMMC_WRITE(host->base, STAT,
- OMAP_HSMMC_READ(host->base, STAT));
- /* Flush posted write */
- OMAP_HSMMC_READ(host->base, STAT);
- spin_unlock(&host->irq_lock);
- return IRQ_HANDLED;
+ if (!host->req_in_progress) {
+ do {
+ OMAP_HSMMC_WRITE(host->base, STAT, status);
+ /* Flush posted write */
+ status = OMAP_HSMMC_READ(host->base, STAT);
+ } while (status & INT_EN_MASK);
+ return;
}
data = host->data;
- status = OMAP_HSMMC_READ(host->base, STAT);
dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status);
if (status & ERR) {
@@ -1041,15 +1052,27 @@
}
OMAP_HSMMC_WRITE(host->base, STAT, status);
- /* Flush posted write */
- OMAP_HSMMC_READ(host->base, STAT);
if (end_cmd || ((status & CC) && host->cmd))
omap_hsmmc_cmd_done(host, host->cmd);
if ((end_trans || (status & TC)) && host->mrq)
omap_hsmmc_xfer_done(host, data);
+}
- spin_unlock(&host->irq_lock);
+/*
+ * MMC controller IRQ handler
+ */
+static irqreturn_t omap_hsmmc_irq(int irq, void *dev_id)
+{
+ struct omap_hsmmc_host *host = dev_id;
+ int status;
+
+ status = OMAP_HSMMC_READ(host->base, STAT);
+ do {
+ omap_hsmmc_do_irq(host, status);
+ /* Flush posted write */
+ status = OMAP_HSMMC_READ(host->base, STAT);
+ } while (status & INT_EN_MASK);
return IRQ_HANDLED;
}
@@ -1244,31 +1267,47 @@
/*
* DMA call back function
*/
-static void omap_hsmmc_dma_cb(int lch, u16 ch_status, void *data)
+static void omap_hsmmc_dma_cb(int lch, u16 ch_status, void *cb_data)
{
- struct omap_hsmmc_host *host = data;
+ struct omap_hsmmc_host *host = cb_data;
+ struct mmc_data *data = host->mrq->data;
+ int dma_ch, req_in_progress;
if (ch_status & OMAP2_DMA_MISALIGNED_ERR_IRQ)
dev_dbg(mmc_dev(host->mmc), "MISALIGNED_ADRS_ERR\n");
- if (host->dma_ch < 0)
+ spin_lock(&host->irq_lock);
+ if (host->dma_ch < 0) {
+ spin_unlock(&host->irq_lock);
return;
+ }
host->dma_sg_idx++;
if (host->dma_sg_idx < host->dma_len) {
/* Fire up the next transfer. */
- omap_hsmmc_config_dma_params(host, host->data,
- host->data->sg + host->dma_sg_idx);
+ omap_hsmmc_config_dma_params(host, data,
+ data->sg + host->dma_sg_idx);
+ spin_unlock(&host->irq_lock);
return;
}
- omap_free_dma(host->dma_ch);
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
+ omap_hsmmc_get_dma_dir(host, data));
+
+ req_in_progress = host->req_in_progress;
+ dma_ch = host->dma_ch;
host->dma_ch = -1;
- /*
- * DMA Callback: run in interrupt context.
- * mutex_unlock will throw a kernel warning if used.
- */
- up(&host->sem);
+ spin_unlock(&host->irq_lock);
+
+ omap_free_dma(dma_ch);
+
+ /* If DMA has finished after TC, complete the request */
+ if (!req_in_progress) {
+ struct mmc_request *mrq = host->mrq;
+
+ host->mrq = NULL;
+ mmc_request_done(host->mmc, mrq);
+ }
}
/*
@@ -1277,7 +1316,7 @@
static int omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host,
struct mmc_request *req)
{
- int dma_ch = 0, ret = 0, err = 1, i;
+ int dma_ch = 0, ret = 0, i;
struct mmc_data *data = req->data;
/* Sanity check: all the SG entries must be aligned by block size. */
@@ -1294,23 +1333,7 @@
*/
return -EINVAL;
- /*
- * If for some reason the DMA transfer is still active,
- * we wait for timeout period and free the dma
- */
- if (host->dma_ch != -1) {
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(100);
- if (down_trylock(&host->sem)) {
- omap_free_dma(host->dma_ch);
- host->dma_ch = -1;
- up(&host->sem);
- return err;
- }
- } else {
- if (down_trylock(&host->sem))
- return err;
- }
+ BUG_ON(host->dma_ch != -1);
ret = omap_request_dma(omap_hsmmc_get_dma_sync_dev(host, data),
"MMC/SD", omap_hsmmc_dma_cb, host, &dma_ch);
@@ -1410,37 +1433,27 @@
struct omap_hsmmc_host *host = mmc_priv(mmc);
int err;
- /*
- * Prevent races with the interrupt handler because of unexpected
- * interrupts, but not if we are already in interrupt context i.e.
- * retries.
- */
- if (!in_interrupt()) {
- spin_lock_irqsave(&host->irq_lock, host->flags);
- /*
- * Protect the card from I/O if there is a possibility
- * it can be removed.
- */
- if (host->protect_card) {
- if (host->reqs_blocked < 3) {
- /*
- * Ensure the controller is left in a consistent
- * state by resetting the command and data state
- * machines.
- */
- omap_hsmmc_reset_controller_fsm(host, SRD);
- omap_hsmmc_reset_controller_fsm(host, SRC);
- host->reqs_blocked += 1;
- }
- req->cmd->error = -EBADF;
- if (req->data)
- req->data->error = -EBADF;
- spin_unlock_irqrestore(&host->irq_lock, host->flags);
- mmc_request_done(mmc, req);
- return;
- } else if (host->reqs_blocked)
- host->reqs_blocked = 0;
- }
+ BUG_ON(host->req_in_progress);
+ BUG_ON(host->dma_ch != -1);
+ if (host->protect_card) {
+ if (host->reqs_blocked < 3) {
+ /*
+ * Ensure the controller is left in a consistent
+ * state by resetting the command and data state
+ * machines.
+ */
+ omap_hsmmc_reset_controller_fsm(host, SRD);
+ omap_hsmmc_reset_controller_fsm(host, SRC);
+ host->reqs_blocked += 1;
+ }
+ req->cmd->error = -EBADF;
+ if (req->data)
+ req->data->error = -EBADF;
+ req->cmd->retries = 0;
+ mmc_request_done(mmc, req);
+ return;
+ } else if (host->reqs_blocked)
+ host->reqs_blocked = 0;
WARN_ON(host->mrq != NULL);
host->mrq = req;
err = omap_hsmmc_prepare_data(host, req);
@@ -1449,8 +1462,6 @@
if (req->data)
req->data->error = err;
host->mrq = NULL;
- if (!in_interrupt())
- spin_unlock_irqrestore(&host->irq_lock, host->flags);
mmc_request_done(mmc, req);
return;
}
@@ -2019,7 +2030,6 @@
mmc->f_min = 400000;
mmc->f_max = 52000000;
- sema_init(&host->sem, 1);
spin_lock_init(&host->irq_lock);
host->iclk = clk_get(&pdev->dev, "ick");
@@ -2162,8 +2172,7 @@
}
}
- OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK);
- OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
+ omap_hsmmc_disable_irq(host);
mmc_host_lazy_disable(host->mmc);
@@ -2258,10 +2267,12 @@
}
#ifdef CONFIG_PM
-static int omap_hsmmc_suspend(struct platform_device *pdev, pm_message_t state)
+static int omap_hsmmc_suspend(struct device *dev)
{
int ret = 0;
+ struct platform_device *pdev = to_platform_device(dev);
struct omap_hsmmc_host *host = platform_get_drvdata(pdev);
+ pm_message_t state = PMSG_SUSPEND; /* unused by MMC core */
if (host && host->suspended)
return 0;
@@ -2281,12 +2292,9 @@
}
cancel_work_sync(&host->mmc_carddetect_work);
mmc_host_enable(host->mmc);
- ret = mmc_suspend_host(host->mmc, state);
+ ret = mmc_suspend_host(host->mmc);
if (ret == 0) {
- OMAP_HSMMC_WRITE(host->base, ISE, 0);
- OMAP_HSMMC_WRITE(host->base, IE, 0);
-
-
+ omap_hsmmc_disable_irq(host);
OMAP_HSMMC_WRITE(host->base, HCTL,
OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP);
mmc_host_disable(host->mmc);
@@ -2310,9 +2318,10 @@
}
/* Routine to resume the MMC device */
-static int omap_hsmmc_resume(struct platform_device *pdev)
+static int omap_hsmmc_resume(struct device *dev)
{
int ret = 0;
+ struct platform_device *pdev = to_platform_device(dev);
struct omap_hsmmc_host *host = platform_get_drvdata(pdev);
if (host && !host->suspended)
@@ -2363,13 +2372,17 @@
#define omap_hsmmc_resume NULL
#endif
-static struct platform_driver omap_hsmmc_driver = {
- .remove = omap_hsmmc_remove,
+static struct dev_pm_ops omap_hsmmc_dev_pm_ops = {
.suspend = omap_hsmmc_suspend,
.resume = omap_hsmmc_resume,
+};
+
+static struct platform_driver omap_hsmmc_driver = {
+ .remove = omap_hsmmc_remove,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
+ .pm = &omap_hsmmc_dev_pm_ops,
},
};
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index e4f00e7..0a4e43f 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -813,7 +813,7 @@
int ret = 0;
if (mmc)
- ret = mmc_suspend_host(mmc, PMSG_SUSPEND);
+ ret = mmc_suspend_host(mmc);
return ret;
}
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 2fdf768..2e16e0a 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -1881,9 +1881,8 @@
static int s3cmci_suspend(struct device *dev)
{
struct mmc_host *mmc = platform_get_drvdata(to_platform_device(dev));
- struct pm_message event = { PM_EVENT_SUSPEND };
- return mmc_suspend_host(mmc, event);
+ return mmc_suspend_host(mmc);
}
static int s3cmci_resume(struct device *dev)
diff --git a/drivers/mmc/host/sdhci-of-core.c b/drivers/mmc/host/sdhci-of-core.c
index 7802a54..a2e9820 100644
--- a/drivers/mmc/host/sdhci-of-core.c
+++ b/drivers/mmc/host/sdhci-of-core.c
@@ -89,7 +89,7 @@
{
struct sdhci_host *host = dev_get_drvdata(&ofdev->dev);
- return mmc_suspend_host(host->mmc, state);
+ return mmc_suspend_host(host->mmc);
}
static int sdhci_of_resume(struct of_device *ofdev)
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index d5b11a1..c8623de 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -129,12 +129,12 @@
SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET |
SDHCI_QUIRK_NO_CARD_NO_RESET,
.ops = {
- .readl = sdhci_be32bs_readl,
- .readw = esdhc_readw,
- .readb = sdhci_be32bs_readb,
- .writel = sdhci_be32bs_writel,
- .writew = esdhc_writew,
- .writeb = esdhc_writeb,
+ .read_l = sdhci_be32bs_readl,
+ .read_w = esdhc_readw,
+ .read_b = sdhci_be32bs_readb,
+ .write_l = sdhci_be32bs_writel,
+ .write_w = esdhc_writew,
+ .write_b = esdhc_writeb,
.set_clock = esdhc_set_clock,
.enable_dma = esdhc_enable_dma,
.get_max_clock = esdhc_get_max_clock,
diff --git a/drivers/mmc/host/sdhci-of-hlwd.c b/drivers/mmc/host/sdhci-of-hlwd.c
index 35117f3..68ddb75 100644
--- a/drivers/mmc/host/sdhci-of-hlwd.c
+++ b/drivers/mmc/host/sdhci-of-hlwd.c
@@ -55,11 +55,11 @@
.quirks = SDHCI_QUIRK_32BIT_DMA_ADDR |
SDHCI_QUIRK_32BIT_DMA_SIZE,
.ops = {
- .readl = sdhci_be32bs_readl,
- .readw = sdhci_be32bs_readw,
- .readb = sdhci_be32bs_readb,
- .writel = sdhci_hlwd_writel,
- .writew = sdhci_hlwd_writew,
- .writeb = sdhci_hlwd_writeb,
+ .read_l = sdhci_be32bs_readl,
+ .read_w = sdhci_be32bs_readw,
+ .read_b = sdhci_be32bs_readb,
+ .write_l = sdhci_hlwd_writel,
+ .write_w = sdhci_hlwd_writew,
+ .write_b = sdhci_hlwd_writeb,
},
};
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 6701af6..65483fd 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -628,7 +628,7 @@
host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pci_slot));
if (IS_ERR(host)) {
dev_err(&pdev->dev, "cannot allocate host\n");
- return ERR_PTR(PTR_ERR(host));
+ return ERR_CAST(host);
}
slot = sdhci_priv(host);
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index 297f40a..b6ee0d7 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -29,6 +29,7 @@
#include <linux/mmc/host.h>
#include <linux/io.h>
+#include <linux/sdhci-pltfm.h>
#include "sdhci.h"
@@ -49,19 +50,18 @@
static int __devinit sdhci_pltfm_probe(struct platform_device *pdev)
{
+ struct sdhci_pltfm_data *pdata = pdev->dev.platform_data;
struct sdhci_host *host;
struct resource *iomem;
int ret;
- BUG_ON(pdev == NULL);
-
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!iomem) {
ret = -ENOMEM;
goto err;
}
- if (resource_size(iomem) != 0x100)
+ if (resource_size(iomem) < 0x100)
dev_err(&pdev->dev, "Invalid iomem size. You may "
"experience problems.\n");
@@ -76,7 +76,12 @@
}
host->hw_name = "platform";
- host->ops = &sdhci_pltfm_ops;
+ if (pdata && pdata->ops)
+ host->ops = pdata->ops;
+ else
+ host->ops = &sdhci_pltfm_ops;
+ if (pdata)
+ host->quirks = pdata->quirks;
host->irq = platform_get_irq(pdev, 0);
if (!request_mem_region(iomem->start, resource_size(iomem),
@@ -93,6 +98,12 @@
goto err_remap;
}
+ if (pdata && pdata->init) {
+ ret = pdata->init(host);
+ if (ret)
+ goto err_plat_init;
+ }
+
ret = sdhci_add_host(host);
if (ret)
goto err_add_host;
@@ -102,6 +113,9 @@
return 0;
err_add_host:
+ if (pdata && pdata->exit)
+ pdata->exit(host);
+err_plat_init:
iounmap(host->ioaddr);
err_remap:
release_mem_region(iomem->start, resource_size(iomem));
@@ -114,6 +128,7 @@
static int __devexit sdhci_pltfm_remove(struct platform_device *pdev)
{
+ struct sdhci_pltfm_data *pdata = pdev->dev.platform_data;
struct sdhci_host *host = platform_get_drvdata(pdev);
struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
int dead;
@@ -125,6 +140,8 @@
dead = 1;
sdhci_remove_host(host, dead);
+ if (pdata && pdata->exit)
+ pdata->exit(host);
iounmap(host->ioaddr);
release_mem_region(iomem->start, resource_size(iomem));
sdhci_free_host(host);
@@ -165,4 +182,3 @@
MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:sdhci");
-
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 2136794..ad30f07 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -317,12 +317,7 @@
host->irq = irq;
/* Setup quirks for the controller */
-
- /* Currently with ADMA enabled we are getting some length
- * interrupts that are not being dealt with, do disable
- * ADMA until this is sorted out. */
- host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
- host->quirks |= SDHCI_QUIRK_32BIT_ADMA_SIZE;
+ host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
#ifndef CONFIG_MMC_SDHCI_S3C_DMA
@@ -330,9 +325,6 @@
* support as well. */
host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
- /* PIO currently has problems with multi-block IO */
- host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
-
#endif /* CONFIG_MMC_SDHCI_S3C_DMA */
/* It seems we do not get an DATA transfer complete on non-busy
@@ -373,6 +365,26 @@
static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct sdhci_s3c *sc = sdhci_priv(host);
+ int ptr;
+
+ sdhci_remove_host(host, 1);
+
+ for (ptr = 0; ptr < 3; ptr++) {
+ clk_disable(sc->clk_bus[ptr]);
+ clk_put(sc->clk_bus[ptr]);
+ }
+ clk_disable(sc->clk_io);
+ clk_put(sc->clk_io);
+
+ iounmap(host->ioaddr);
+ release_resource(sc->ioarea);
+ kfree(sc->ioarea);
+
+ sdhci_free_host(host);
+ platform_set_drvdata(pdev, NULL);
+
return 0;
}
diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
new file mode 100644
index 0000000..d70c54c
--- /dev/null
+++ b/drivers/mmc/host/sdhci-spear.c
@@ -0,0 +1,298 @@
+/*
+ * drivers/mmc/host/sdhci-spear.c
+ *
+ * Support of SDHCI platform devices for spear soc family
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * Inspired by sdhci-pltfm.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/highmem.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sdhci-spear.h>
+#include <linux/io.h>
+#include "sdhci.h"
+
+struct spear_sdhci {
+ struct clk *clk;
+ struct sdhci_plat_data *data;
+};
+
+/* sdhci ops */
+static struct sdhci_ops sdhci_pltfm_ops = {
+ /* Nothing to do for now. */
+};
+
+/* gpio card detection interrupt handler */
+static irqreturn_t sdhci_gpio_irq(int irq, void *dev_id)
+{
+ struct platform_device *pdev = dev_id;
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev);
+ unsigned long gpio_irq_type;
+ int val;
+
+ val = gpio_get_value(sdhci->data->card_int_gpio);
+
+ /* val == 1 -> card removed, val == 0 -> card inserted */
+ /* if card removed - set irq for low level, else vice versa */
+ gpio_irq_type = val ? IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH;
+ set_irq_type(irq, gpio_irq_type);
+
+ if (sdhci->data->card_power_gpio >= 0) {
+ if (!sdhci->data->power_always_enb) {
+ /* if card inserted, give power, otherwise remove it */
+ val = sdhci->data->power_active_high ? !val : val ;
+ gpio_set_value(sdhci->data->card_power_gpio, val);
+ }
+ }
+
+ /* inform sdhci driver about card insertion/removal */
+ tasklet_schedule(&host->card_tasklet);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit sdhci_probe(struct platform_device *pdev)
+{
+ struct sdhci_host *host;
+ struct resource *iomem;
+ struct spear_sdhci *sdhci;
+ int ret;
+
+ BUG_ON(pdev == NULL);
+
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iomem) {
+ ret = -ENOMEM;
+ dev_dbg(&pdev->dev, "memory resource not defined\n");
+ goto err;
+ }
+
+ if (!request_mem_region(iomem->start, resource_size(iomem),
+ "spear-sdhci")) {
+ ret = -EBUSY;
+ dev_dbg(&pdev->dev, "cannot request region\n");
+ goto err;
+ }
+
+ sdhci = kzalloc(sizeof(*sdhci), GFP_KERNEL);
+ if (!sdhci) {
+ ret = -ENOMEM;
+ dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n");
+ goto err_kzalloc;
+ }
+
+ /* clk enable */
+ sdhci->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(sdhci->clk)) {
+ ret = PTR_ERR(sdhci->clk);
+ dev_dbg(&pdev->dev, "Error getting clock\n");
+ goto err_clk_get;
+ }
+
+ ret = clk_enable(sdhci->clk);
+ if (ret) {
+ dev_dbg(&pdev->dev, "Error enabling clock\n");
+ goto err_clk_enb;
+ }
+
+ /* overwrite platform_data */
+ sdhci->data = dev_get_platdata(&pdev->dev);
+ pdev->dev.platform_data = sdhci;
+
+ if (pdev->dev.parent)
+ host = sdhci_alloc_host(pdev->dev.parent, 0);
+ else
+ host = sdhci_alloc_host(&pdev->dev, 0);
+
+ if (IS_ERR(host)) {
+ ret = PTR_ERR(host);
+ dev_dbg(&pdev->dev, "error allocating host\n");
+ goto err_alloc_host;
+ }
+
+ host->hw_name = "sdhci";
+ host->ops = &sdhci_pltfm_ops;
+ host->irq = platform_get_irq(pdev, 0);
+ host->quirks = SDHCI_QUIRK_BROKEN_ADMA;
+
+ host->ioaddr = ioremap(iomem->start, resource_size(iomem));
+ if (!host->ioaddr) {
+ ret = -ENOMEM;
+ dev_dbg(&pdev->dev, "failed to remap registers\n");
+ goto err_ioremap;
+ }
+
+ ret = sdhci_add_host(host);
+ if (ret) {
+ dev_dbg(&pdev->dev, "error adding host\n");
+ goto err_add_host;
+ }
+
+ platform_set_drvdata(pdev, host);
+
+ /*
+ * It is optional to use GPIOs for sdhci Power control & sdhci card
+ * interrupt detection. If sdhci->data is NULL, then use original sdhci
+ * lines otherwise GPIO lines.
+ * If GPIO is selected for power control, then power should be disabled
+ * after card removal and should be enabled when card insertion
+ * interrupt occurs
+ */
+ if (!sdhci->data)
+ return 0;
+
+ if (sdhci->data->card_power_gpio >= 0) {
+ int val = 0;
+
+ ret = gpio_request(sdhci->data->card_power_gpio, "sdhci");
+ if (ret < 0) {
+ dev_dbg(&pdev->dev, "gpio request fail: %d\n",
+ sdhci->data->card_power_gpio);
+ goto err_pgpio_request;
+ }
+
+ if (sdhci->data->power_always_enb)
+ val = sdhci->data->power_active_high;
+ else
+ val = !sdhci->data->power_active_high;
+
+ ret = gpio_direction_output(sdhci->data->card_power_gpio, val);
+ if (ret) {
+ dev_dbg(&pdev->dev, "gpio set direction fail: %d\n",
+ sdhci->data->card_power_gpio);
+ goto err_pgpio_direction;
+ }
+
+ gpio_set_value(sdhci->data->card_power_gpio, 1);
+ }
+
+ if (sdhci->data->card_int_gpio >= 0) {
+ ret = gpio_request(sdhci->data->card_int_gpio, "sdhci");
+ if (ret < 0) {
+ dev_dbg(&pdev->dev, "gpio request fail: %d\n",
+ sdhci->data->card_int_gpio);
+ goto err_igpio_request;
+ }
+
+ ret = gpio_direction_input(sdhci->data->card_int_gpio);
+ if (ret) {
+ dev_dbg(&pdev->dev, "gpio set direction fail: %d\n",
+ sdhci->data->card_int_gpio);
+ goto err_igpio_direction;
+ }
+ ret = request_irq(gpio_to_irq(sdhci->data->card_int_gpio),
+ sdhci_gpio_irq, IRQF_TRIGGER_LOW,
+ mmc_hostname(host->mmc), pdev);
+ if (ret) {
+ dev_dbg(&pdev->dev, "gpio request irq fail: %d\n",
+ sdhci->data->card_int_gpio);
+ goto err_igpio_request_irq;
+ }
+
+ }
+
+ return 0;
+
+err_igpio_request_irq:
+err_igpio_direction:
+ if (sdhci->data->card_int_gpio >= 0)
+ gpio_free(sdhci->data->card_int_gpio);
+err_igpio_request:
+err_pgpio_direction:
+ if (sdhci->data->card_power_gpio >= 0)
+ gpio_free(sdhci->data->card_power_gpio);
+err_pgpio_request:
+ platform_set_drvdata(pdev, NULL);
+ sdhci_remove_host(host, 1);
+err_add_host:
+ iounmap(host->ioaddr);
+err_ioremap:
+ sdhci_free_host(host);
+err_alloc_host:
+ clk_disable(sdhci->clk);
+err_clk_enb:
+ clk_put(sdhci->clk);
+err_clk_get:
+ kfree(sdhci);
+err_kzalloc:
+ release_mem_region(iomem->start, resource_size(iomem));
+err:
+ dev_err(&pdev->dev, "spear-sdhci probe failed: %d\n", ret);
+ return ret;
+}
+
+static int __devexit sdhci_remove(struct platform_device *pdev)
+{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev);
+ int dead;
+ u32 scratch;
+
+ if (sdhci->data) {
+ if (sdhci->data->card_int_gpio >= 0) {
+ free_irq(gpio_to_irq(sdhci->data->card_int_gpio), pdev);
+ gpio_free(sdhci->data->card_int_gpio);
+ }
+
+ if (sdhci->data->card_power_gpio >= 0)
+ gpio_free(sdhci->data->card_power_gpio);
+ }
+
+ platform_set_drvdata(pdev, NULL);
+ dead = 0;
+ scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
+ if (scratch == (u32)-1)
+ dead = 1;
+
+ sdhci_remove_host(host, dead);
+ iounmap(host->ioaddr);
+ sdhci_free_host(host);
+ clk_disable(sdhci->clk);
+ clk_put(sdhci->clk);
+ kfree(sdhci);
+ if (iomem)
+ release_mem_region(iomem->start, resource_size(iomem));
+
+ return 0;
+}
+
+static struct platform_driver sdhci_driver = {
+ .driver = {
+ .name = "sdhci",
+ .owner = THIS_MODULE,
+ },
+ .probe = sdhci_probe,
+ .remove = __devexit_p(sdhci_remove),
+};
+
+static int __init sdhci_init(void)
+{
+ return platform_driver_register(&sdhci_driver);
+}
+module_init(sdhci_init);
+
+static void __exit sdhci_exit(void)
+{
+ platform_driver_unregister(&sdhci_driver);
+}
+module_exit(sdhci_exit);
+
+MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver");
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 9d4fdfa..c6d1bd8 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -496,12 +496,22 @@
WARN_ON((desc - host->adma_desc) > (128 * 2 + 1) * 4);
}
- /*
- * Add a terminating entry.
- */
+ if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) {
+ /*
+ * Mark the last descriptor as the terminating descriptor
+ */
+ if (desc != host->adma_desc) {
+ desc -= 8;
+ desc[0] |= 0x2; /* end */
+ }
+ } else {
+ /*
+ * Add a terminating entry.
+ */
- /* nop, end, valid */
- sdhci_set_adma_desc(desc, 0, 0, 0x3);
+ /* nop, end, valid */
+ sdhci_set_adma_desc(desc, 0, 0, 0x3);
+ }
/*
* Resync align buffer as we might have changed it.
@@ -1587,7 +1597,7 @@
sdhci_disable_card_detection(host);
- ret = mmc_suspend_host(host->mmc, state);
+ ret = mmc_suspend_host(host->mmc);
if (ret)
return ret;
@@ -1744,7 +1754,8 @@
host->max_clk =
(caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
host->max_clk *= 1000000;
- if (host->max_clk == 0) {
+ if (host->max_clk == 0 || host->quirks &
+ SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) {
if (!host->ops->get_max_clock) {
printk(KERN_ERR
"%s: Hardware doesn't specify base clock "
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 842f46f..c846813 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -127,7 +127,7 @@
#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
- SDHCI_INT_DATA_END_BIT | SDHCI_ADMA_ERROR)
+ SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR)
#define SDHCI_INT_ALL_MASK ((unsigned int)-1)
#define SDHCI_ACMD12_ERR 0x3C
@@ -236,6 +236,10 @@
#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
/* Controller uses SDCLK instead of TMCLK for data timeouts */
#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
+/* Controller reports wrong base clock capability */
+#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
+/* Controller cannot support End Attribute in NOP ADMA descriptor */
+#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
@@ -294,12 +298,12 @@
struct sdhci_ops {
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
- u32 (*readl)(struct sdhci_host *host, int reg);
- u16 (*readw)(struct sdhci_host *host, int reg);
- u8 (*readb)(struct sdhci_host *host, int reg);
- void (*writel)(struct sdhci_host *host, u32 val, int reg);
- void (*writew)(struct sdhci_host *host, u16 val, int reg);
- void (*writeb)(struct sdhci_host *host, u8 val, int reg);
+ u32 (*read_l)(struct sdhci_host *host, int reg);
+ u16 (*read_w)(struct sdhci_host *host, int reg);
+ u8 (*read_b)(struct sdhci_host *host, int reg);
+ void (*write_l)(struct sdhci_host *host, u32 val, int reg);
+ void (*write_w)(struct sdhci_host *host, u16 val, int reg);
+ void (*write_b)(struct sdhci_host *host, u8 val, int reg);
#endif
void (*set_clock)(struct sdhci_host *host, unsigned int clock);
@@ -314,48 +318,48 @@
static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
{
- if (unlikely(host->ops->writel))
- host->ops->writel(host, val, reg);
+ if (unlikely(host->ops->write_l))
+ host->ops->write_l(host, val, reg);
else
writel(val, host->ioaddr + reg);
}
static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
{
- if (unlikely(host->ops->writew))
- host->ops->writew(host, val, reg);
+ if (unlikely(host->ops->write_w))
+ host->ops->write_w(host, val, reg);
else
writew(val, host->ioaddr + reg);
}
static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
{
- if (unlikely(host->ops->writeb))
- host->ops->writeb(host, val, reg);
+ if (unlikely(host->ops->write_b))
+ host->ops->write_b(host, val, reg);
else
writeb(val, host->ioaddr + reg);
}
static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
{
- if (unlikely(host->ops->readl))
- return host->ops->readl(host, reg);
+ if (unlikely(host->ops->read_l))
+ return host->ops->read_l(host, reg);
else
return readl(host->ioaddr + reg);
}
static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
{
- if (unlikely(host->ops->readw))
- return host->ops->readw(host, reg);
+ if (unlikely(host->ops->read_w))
+ return host->ops->read_w(host, reg);
else
return readw(host->ioaddr + reg);
}
static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
{
- if (unlikely(host->ops->readb))
- return host->ops->readb(host, reg);
+ if (unlikely(host->ops->read_b))
+ return host->ops->read_b(host, reg);
else
return readb(host->ioaddr + reg);
}
diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c
index cb41e9c..e7507af 100644
--- a/drivers/mmc/host/sdricoh_cs.c
+++ b/drivers/mmc/host/sdricoh_cs.c
@@ -519,7 +519,7 @@
{
struct mmc_host *mmc = link->priv;
dev_dbg(&link->dev, "suspend\n");
- mmc_suspend_host(mmc, PMSG_SUSPEND);
+ mmc_suspend_host(mmc);
return 0;
}
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
new file mode 100644
index 0000000..5d3f824
--- /dev/null
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -0,0 +1,940 @@
+/*
+ * MMCIF eMMC driver.
+ *
+ * Copyright (C) 2010 Renesas Solutions Corp.
+ * Yusuke Goda <yusuke.goda.sx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ *
+ * TODO
+ * 1. DMA
+ * 2. Power management
+ * 3. Handle MMC errors better
+ *
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/core.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sdio.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/mmc/sh_mmcif.h>
+
+#define DRIVER_NAME "sh_mmcif"
+#define DRIVER_VERSION "2010-04-28"
+
+/* CE_CMD_SET */
+#define CMD_MASK 0x3f000000
+#define CMD_SET_RTYP_NO ((0 << 23) | (0 << 22))
+#define CMD_SET_RTYP_6B ((0 << 23) | (1 << 22)) /* R1/R1b/R3/R4/R5 */
+#define CMD_SET_RTYP_17B ((1 << 23) | (0 << 22)) /* R2 */
+#define CMD_SET_RBSY (1 << 21) /* R1b */
+#define CMD_SET_CCSEN (1 << 20)
+#define CMD_SET_WDAT (1 << 19) /* 1: on data, 0: no data */
+#define CMD_SET_DWEN (1 << 18) /* 1: write, 0: read */
+#define CMD_SET_CMLTE (1 << 17) /* 1: multi block trans, 0: single */
+#define CMD_SET_CMD12EN (1 << 16) /* 1: CMD12 auto issue */
+#define CMD_SET_RIDXC_INDEX ((0 << 15) | (0 << 14)) /* index check */
+#define CMD_SET_RIDXC_BITS ((0 << 15) | (1 << 14)) /* check bits check */
+#define CMD_SET_RIDXC_NO ((1 << 15) | (0 << 14)) /* no check */
+#define CMD_SET_CRC7C ((0 << 13) | (0 << 12)) /* CRC7 check*/
+#define CMD_SET_CRC7C_BITS ((0 << 13) | (1 << 12)) /* check bits check*/
+#define CMD_SET_CRC7C_INTERNAL ((1 << 13) | (0 << 12)) /* internal CRC7 check*/
+#define CMD_SET_CRC16C (1 << 10) /* 0: CRC16 check*/
+#define CMD_SET_CRCSTE (1 << 8) /* 1: not receive CRC status */
+#define CMD_SET_TBIT (1 << 7) /* 1: tran mission bit "Low" */
+#define CMD_SET_OPDM (1 << 6) /* 1: open/drain */
+#define CMD_SET_CCSH (1 << 5)
+#define CMD_SET_DATW_1 ((0 << 1) | (0 << 0)) /* 1bit */
+#define CMD_SET_DATW_4 ((0 << 1) | (1 << 0)) /* 4bit */
+#define CMD_SET_DATW_8 ((1 << 1) | (0 << 0)) /* 8bit */
+
+/* CE_CMD_CTRL */
+#define CMD_CTRL_BREAK (1 << 0)
+
+/* CE_BLOCK_SET */
+#define BLOCK_SIZE_MASK 0x0000ffff
+
+/* CE_CLK_CTRL */
+#define CLK_ENABLE (1 << 24) /* 1: output mmc clock */
+#define CLK_CLEAR ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16))
+#define CLK_SUP_PCLK ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16))
+#define SRSPTO_256 ((1 << 13) | (0 << 12)) /* resp timeout */
+#define SRBSYTO_29 ((1 << 11) | (1 << 10) | \
+ (1 << 9) | (1 << 8)) /* resp busy timeout */
+#define SRWDTO_29 ((1 << 7) | (1 << 6) | \
+ (1 << 5) | (1 << 4)) /* read/write timeout */
+#define SCCSTO_29 ((1 << 3) | (1 << 2) | \
+ (1 << 1) | (1 << 0)) /* ccs timeout */
+
+/* CE_BUF_ACC */
+#define BUF_ACC_DMAWEN (1 << 25)
+#define BUF_ACC_DMAREN (1 << 24)
+#define BUF_ACC_BUSW_32 (0 << 17)
+#define BUF_ACC_BUSW_16 (1 << 17)
+#define BUF_ACC_ATYP (1 << 16)
+
+/* CE_INT */
+#define INT_CCSDE (1 << 29)
+#define INT_CMD12DRE (1 << 26)
+#define INT_CMD12RBE (1 << 25)
+#define INT_CMD12CRE (1 << 24)
+#define INT_DTRANE (1 << 23)
+#define INT_BUFRE (1 << 22)
+#define INT_BUFWEN (1 << 21)
+#define INT_BUFREN (1 << 20)
+#define INT_CCSRCV (1 << 19)
+#define INT_RBSYE (1 << 17)
+#define INT_CRSPE (1 << 16)
+#define INT_CMDVIO (1 << 15)
+#define INT_BUFVIO (1 << 14)
+#define INT_WDATERR (1 << 11)
+#define INT_RDATERR (1 << 10)
+#define INT_RIDXERR (1 << 9)
+#define INT_RSPERR (1 << 8)
+#define INT_CCSTO (1 << 5)
+#define INT_CRCSTO (1 << 4)
+#define INT_WDATTO (1 << 3)
+#define INT_RDATTO (1 << 2)
+#define INT_RBSYTO (1 << 1)
+#define INT_RSPTO (1 << 0)
+#define INT_ERR_STS (INT_CMDVIO | INT_BUFVIO | INT_WDATERR | \
+ INT_RDATERR | INT_RIDXERR | INT_RSPERR | \
+ INT_CCSTO | INT_CRCSTO | INT_WDATTO | \
+ INT_RDATTO | INT_RBSYTO | INT_RSPTO)
+
+/* CE_INT_MASK */
+#define MASK_ALL 0x00000000
+#define MASK_MCCSDE (1 << 29)
+#define MASK_MCMD12DRE (1 << 26)
+#define MASK_MCMD12RBE (1 << 25)
+#define MASK_MCMD12CRE (1 << 24)
+#define MASK_MDTRANE (1 << 23)
+#define MASK_MBUFRE (1 << 22)
+#define MASK_MBUFWEN (1 << 21)
+#define MASK_MBUFREN (1 << 20)
+#define MASK_MCCSRCV (1 << 19)
+#define MASK_MRBSYE (1 << 17)
+#define MASK_MCRSPE (1 << 16)
+#define MASK_MCMDVIO (1 << 15)
+#define MASK_MBUFVIO (1 << 14)
+#define MASK_MWDATERR (1 << 11)
+#define MASK_MRDATERR (1 << 10)
+#define MASK_MRIDXERR (1 << 9)
+#define MASK_MRSPERR (1 << 8)
+#define MASK_MCCSTO (1 << 5)
+#define MASK_MCRCSTO (1 << 4)
+#define MASK_MWDATTO (1 << 3)
+#define MASK_MRDATTO (1 << 2)
+#define MASK_MRBSYTO (1 << 1)
+#define MASK_MRSPTO (1 << 0)
+
+/* CE_HOST_STS1 */
+#define STS1_CMDSEQ (1 << 31)
+
+/* CE_HOST_STS2 */
+#define STS2_CRCSTE (1 << 31)
+#define STS2_CRC16E (1 << 30)
+#define STS2_AC12CRCE (1 << 29)
+#define STS2_RSPCRC7E (1 << 28)
+#define STS2_CRCSTEBE (1 << 27)
+#define STS2_RDATEBE (1 << 26)
+#define STS2_AC12REBE (1 << 25)
+#define STS2_RSPEBE (1 << 24)
+#define STS2_AC12IDXE (1 << 23)
+#define STS2_RSPIDXE (1 << 22)
+#define STS2_CCSTO (1 << 15)
+#define STS2_RDATTO (1 << 14)
+#define STS2_DATBSYTO (1 << 13)
+#define STS2_CRCSTTO (1 << 12)
+#define STS2_AC12BSYTO (1 << 11)
+#define STS2_RSPBSYTO (1 << 10)
+#define STS2_AC12RSPTO (1 << 9)
+#define STS2_RSPTO (1 << 8)
+#define STS2_CRC_ERR (STS2_CRCSTE | STS2_CRC16E | \
+ STS2_AC12CRCE | STS2_RSPCRC7E | STS2_CRCSTEBE)
+#define STS2_TIMEOUT_ERR (STS2_CCSTO | STS2_RDATTO | \
+ STS2_DATBSYTO | STS2_CRCSTTO | \
+ STS2_AC12BSYTO | STS2_RSPBSYTO | \
+ STS2_AC12RSPTO | STS2_RSPTO)
+
+/* CE_VERSION */
+#define SOFT_RST_ON (1 << 31)
+#define SOFT_RST_OFF (0 << 31)
+
+#define CLKDEV_EMMC_DATA 52000000 /* 52MHz */
+#define CLKDEV_MMC_DATA 20000000 /* 20MHz */
+#define CLKDEV_INIT 400000 /* 400 KHz */
+
+struct sh_mmcif_host {
+ struct mmc_host *mmc;
+ struct mmc_data *data;
+ struct mmc_command *cmd;
+ struct platform_device *pd;
+ struct clk *hclk;
+ unsigned int clk;
+ int bus_width;
+ u16 wait_int;
+ u16 sd_error;
+ long timeout;
+ void __iomem *addr;
+ wait_queue_head_t intr_wait;
+};
+
+
+static inline void sh_mmcif_bitset(struct sh_mmcif_host *host,
+ unsigned int reg, u32 val)
+{
+ writel(val | readl(host->addr + reg), host->addr + reg);
+}
+
+static inline void sh_mmcif_bitclr(struct sh_mmcif_host *host,
+ unsigned int reg, u32 val)
+{
+ writel(~val & readl(host->addr + reg), host->addr + reg);
+}
+
+
+static void sh_mmcif_clock_control(struct sh_mmcif_host *host, unsigned int clk)
+{
+ struct sh_mmcif_plat_data *p = host->pd->dev.platform_data;
+
+ sh_mmcif_bitclr(host, MMCIF_CE_CLK_CTRL, CLK_ENABLE);
+ sh_mmcif_bitclr(host, MMCIF_CE_CLK_CTRL, CLK_CLEAR);
+
+ if (!clk)
+ return;
+ if (p->sup_pclk && clk == host->clk)
+ sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, CLK_SUP_PCLK);
+ else
+ sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, CLK_CLEAR &
+ (ilog2(__rounddown_pow_of_two(host->clk / clk)) << 16));
+
+ sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, CLK_ENABLE);
+}
+
+static void sh_mmcif_sync_reset(struct sh_mmcif_host *host)
+{
+ u32 tmp;
+
+ tmp = 0x010f0000 & sh_mmcif_readl(host->addr, MMCIF_CE_CLK_CTRL);
+
+ sh_mmcif_writel(host->addr, MMCIF_CE_VERSION, SOFT_RST_ON);
+ sh_mmcif_writel(host->addr, MMCIF_CE_VERSION, SOFT_RST_OFF);
+ sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, tmp |
+ SRSPTO_256 | SRBSYTO_29 | SRWDTO_29 | SCCSTO_29);
+ /* byte swap on */
+ sh_mmcif_bitset(host, MMCIF_CE_BUF_ACC, BUF_ACC_ATYP);
+}
+
+static int sh_mmcif_error_manage(struct sh_mmcif_host *host)
+{
+ u32 state1, state2;
+ int ret, timeout = 10000000;
+
+ host->sd_error = 0;
+ host->wait_int = 0;
+
+ state1 = sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS1);
+ state2 = sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS2);
+ pr_debug("%s: ERR HOST_STS1 = %08x\n", DRIVER_NAME, state1);
+ pr_debug("%s: ERR HOST_STS2 = %08x\n", DRIVER_NAME, state2);
+
+ if (state1 & STS1_CMDSEQ) {
+ sh_mmcif_bitset(host, MMCIF_CE_CMD_CTRL, CMD_CTRL_BREAK);
+ sh_mmcif_bitset(host, MMCIF_CE_CMD_CTRL, ~CMD_CTRL_BREAK);
+ while (1) {
+ timeout--;
+ if (timeout < 0) {
+ pr_err(DRIVER_NAME": Forceed end of " \
+ "command sequence timeout err\n");
+ return -EIO;
+ }
+ if (!(sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS1)
+ & STS1_CMDSEQ))
+ break;
+ mdelay(1);
+ }
+ sh_mmcif_sync_reset(host);
+ pr_debug(DRIVER_NAME": Forced end of command sequence\n");
+ return -EIO;
+ }
+
+ if (state2 & STS2_CRC_ERR) {
+ pr_debug(DRIVER_NAME": Happened CRC error\n");
+ ret = -EIO;
+ } else if (state2 & STS2_TIMEOUT_ERR) {
+ pr_debug(DRIVER_NAME": Happened Timeout error\n");
+ ret = -ETIMEDOUT;
+ } else {
+ pr_debug(DRIVER_NAME": Happened End/Index error\n");
+ ret = -EIO;
+ }
+ return ret;
+}
+
+static int sh_mmcif_single_read(struct sh_mmcif_host *host,
+ struct mmc_request *mrq)
+{
+ struct mmc_data *data = mrq->data;
+ long time;
+ u32 blocksize, i, *p = sg_virt(data->sg);
+
+ host->wait_int = 0;
+
+ /* buf read enable */
+ sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFREN);
+ time = wait_event_interruptible_timeout(host->intr_wait,
+ host->wait_int == 1 ||
+ host->sd_error == 1, host->timeout);
+ if (host->wait_int != 1 && (time == 0 || host->sd_error != 0))
+ return sh_mmcif_error_manage(host);
+
+ host->wait_int = 0;
+ blocksize = (BLOCK_SIZE_MASK &
+ sh_mmcif_readl(host->addr, MMCIF_CE_BLOCK_SET)) + 3;
+ for (i = 0; i < blocksize / 4; i++)
+ *p++ = sh_mmcif_readl(host->addr, MMCIF_CE_DATA);
+
+ /* buffer read end */
+ sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFRE);
+ time = wait_event_interruptible_timeout(host->intr_wait,
+ host->wait_int == 1 ||
+ host->sd_error == 1, host->timeout);
+ if (host->wait_int != 1 && (time == 0 || host->sd_error != 0))
+ return sh_mmcif_error_manage(host);
+
+ host->wait_int = 0;
+ return 0;
+}
+
+static int sh_mmcif_multi_read(struct sh_mmcif_host *host,
+ struct mmc_request *mrq)
+{
+ struct mmc_data *data = mrq->data;
+ long time;
+ u32 blocksize, i, j, sec, *p;
+
+ blocksize = BLOCK_SIZE_MASK & sh_mmcif_readl(host->addr,
+ MMCIF_CE_BLOCK_SET);
+ for (j = 0; j < data->sg_len; j++) {
+ p = sg_virt(data->sg);
+ host->wait_int = 0;
+ for (sec = 0; sec < data->sg->length / blocksize; sec++) {
+ sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFREN);
+ /* buf read enable */
+ time = wait_event_interruptible_timeout(host->intr_wait,
+ host->wait_int == 1 ||
+ host->sd_error == 1, host->timeout);
+
+ if (host->wait_int != 1 &&
+ (time == 0 || host->sd_error != 0))
+ return sh_mmcif_error_manage(host);
+
+ host->wait_int = 0;
+ for (i = 0; i < blocksize / 4; i++)
+ *p++ = sh_mmcif_readl(host->addr,
+ MMCIF_CE_DATA);
+ }
+ if (j < data->sg_len - 1)
+ data->sg++;
+ }
+ return 0;
+}
+
+static int sh_mmcif_single_write(struct sh_mmcif_host *host,
+ struct mmc_request *mrq)
+{
+ struct mmc_data *data = mrq->data;
+ long time;
+ u32 blocksize, i, *p = sg_virt(data->sg);
+
+ host->wait_int = 0;
+ sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN);
+
+ /* buf write enable */
+ time = wait_event_interruptible_timeout(host->intr_wait,
+ host->wait_int == 1 ||
+ host->sd_error == 1, host->timeout);
+ if (host->wait_int != 1 && (time == 0 || host->sd_error != 0))
+ return sh_mmcif_error_manage(host);
+
+ host->wait_int = 0;
+ blocksize = (BLOCK_SIZE_MASK &
+ sh_mmcif_readl(host->addr, MMCIF_CE_BLOCK_SET)) + 3;
+ for (i = 0; i < blocksize / 4; i++)
+ sh_mmcif_writel(host->addr, MMCIF_CE_DATA, *p++);
+
+ /* buffer write end */
+ sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MDTRANE);
+
+ time = wait_event_interruptible_timeout(host->intr_wait,
+ host->wait_int == 1 ||
+ host->sd_error == 1, host->timeout);
+ if (host->wait_int != 1 && (time == 0 || host->sd_error != 0))
+ return sh_mmcif_error_manage(host);
+
+ host->wait_int = 0;
+ return 0;
+}
+
+static int sh_mmcif_multi_write(struct sh_mmcif_host *host,
+ struct mmc_request *mrq)
+{
+ struct mmc_data *data = mrq->data;
+ long time;
+ u32 i, sec, j, blocksize, *p;
+
+ blocksize = BLOCK_SIZE_MASK & sh_mmcif_readl(host->addr,
+ MMCIF_CE_BLOCK_SET);
+
+ for (j = 0; j < data->sg_len; j++) {
+ p = sg_virt(data->sg);
+ host->wait_int = 0;
+ for (sec = 0; sec < data->sg->length / blocksize; sec++) {
+ sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN);
+ /* buf write enable*/
+ time = wait_event_interruptible_timeout(host->intr_wait,
+ host->wait_int == 1 ||
+ host->sd_error == 1, host->timeout);
+
+ if (host->wait_int != 1 &&
+ (time == 0 || host->sd_error != 0))
+ return sh_mmcif_error_manage(host);
+
+ host->wait_int = 0;
+ for (i = 0; i < blocksize / 4; i++)
+ sh_mmcif_writel(host->addr,
+ MMCIF_CE_DATA, *p++);
+ }
+ if (j < data->sg_len - 1)
+ data->sg++;
+ }
+ return 0;
+}
+
+static void sh_mmcif_get_response(struct sh_mmcif_host *host,
+ struct mmc_command *cmd)
+{
+ if (cmd->flags & MMC_RSP_136) {
+ cmd->resp[0] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP3);
+ cmd->resp[1] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP2);
+ cmd->resp[2] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP1);
+ cmd->resp[3] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP0);
+ } else
+ cmd->resp[0] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP0);
+}
+
+static void sh_mmcif_get_cmd12response(struct sh_mmcif_host *host,
+ struct mmc_command *cmd)
+{
+ cmd->resp[0] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP_CMD12);
+}
+
+static u32 sh_mmcif_set_cmd(struct sh_mmcif_host *host,
+ struct mmc_request *mrq, struct mmc_command *cmd, u32 opc)
+{
+ u32 tmp = 0;
+
+ /* Response Type check */
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_NONE:
+ tmp |= CMD_SET_RTYP_NO;
+ break;
+ case MMC_RSP_R1:
+ case MMC_RSP_R1B:
+ case MMC_RSP_R3:
+ tmp |= CMD_SET_RTYP_6B;
+ break;
+ case MMC_RSP_R2:
+ tmp |= CMD_SET_RTYP_17B;
+ break;
+ default:
+ pr_err(DRIVER_NAME": Not support type response.\n");
+ break;
+ }
+ switch (opc) {
+ /* RBSY */
+ case MMC_SWITCH:
+ case MMC_STOP_TRANSMISSION:
+ case MMC_SET_WRITE_PROT:
+ case MMC_CLR_WRITE_PROT:
+ case MMC_ERASE:
+ case MMC_GEN_CMD:
+ tmp |= CMD_SET_RBSY;
+ break;
+ }
+ /* WDAT / DATW */
+ if (host->data) {
+ tmp |= CMD_SET_WDAT;
+ switch (host->bus_width) {
+ case MMC_BUS_WIDTH_1:
+ tmp |= CMD_SET_DATW_1;
+ break;
+ case MMC_BUS_WIDTH_4:
+ tmp |= CMD_SET_DATW_4;
+ break;
+ case MMC_BUS_WIDTH_8:
+ tmp |= CMD_SET_DATW_8;
+ break;
+ default:
+ pr_err(DRIVER_NAME": Not support bus width.\n");
+ break;
+ }
+ }
+ /* DWEN */
+ if (opc == MMC_WRITE_BLOCK || opc == MMC_WRITE_MULTIPLE_BLOCK)
+ tmp |= CMD_SET_DWEN;
+ /* CMLTE/CMD12EN */
+ if (opc == MMC_READ_MULTIPLE_BLOCK || opc == MMC_WRITE_MULTIPLE_BLOCK) {
+ tmp |= CMD_SET_CMLTE | CMD_SET_CMD12EN;
+ sh_mmcif_bitset(host, MMCIF_CE_BLOCK_SET,
+ mrq->data->blocks << 16);
+ }
+ /* RIDXC[1:0] check bits */
+ if (opc == MMC_SEND_OP_COND || opc == MMC_ALL_SEND_CID ||
+ opc == MMC_SEND_CSD || opc == MMC_SEND_CID)
+ tmp |= CMD_SET_RIDXC_BITS;
+ /* RCRC7C[1:0] check bits */
+ if (opc == MMC_SEND_OP_COND)
+ tmp |= CMD_SET_CRC7C_BITS;
+ /* RCRC7C[1:0] internal CRC7 */
+ if (opc == MMC_ALL_SEND_CID ||
+ opc == MMC_SEND_CSD || opc == MMC_SEND_CID)
+ tmp |= CMD_SET_CRC7C_INTERNAL;
+
+ return opc = ((opc << 24) | tmp);
+}
+
+static u32 sh_mmcif_data_trans(struct sh_mmcif_host *host,
+ struct mmc_request *mrq, u32 opc)
+{
+ u32 ret;
+
+ switch (opc) {
+ case MMC_READ_MULTIPLE_BLOCK:
+ ret = sh_mmcif_multi_read(host, mrq);
+ break;
+ case MMC_WRITE_MULTIPLE_BLOCK:
+ ret = sh_mmcif_multi_write(host, mrq);
+ break;
+ case MMC_WRITE_BLOCK:
+ ret = sh_mmcif_single_write(host, mrq);
+ break;
+ case MMC_READ_SINGLE_BLOCK:
+ case MMC_SEND_EXT_CSD:
+ ret = sh_mmcif_single_read(host, mrq);
+ break;
+ default:
+ pr_err(DRIVER_NAME": NOT SUPPORT CMD = d'%08d\n", opc);
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static void sh_mmcif_start_cmd(struct sh_mmcif_host *host,
+ struct mmc_request *mrq, struct mmc_command *cmd)
+{
+ long time;
+ int ret = 0, mask = 0;
+ u32 opc = cmd->opcode;
+
+ host->cmd = cmd;
+
+ switch (opc) {
+ /* respons busy check */
+ case MMC_SWITCH:
+ case MMC_STOP_TRANSMISSION:
+ case MMC_SET_WRITE_PROT:
+ case MMC_CLR_WRITE_PROT:
+ case MMC_ERASE:
+ case MMC_GEN_CMD:
+ mask = MASK_MRBSYE;
+ break;
+ default:
+ mask = MASK_MCRSPE;
+ break;
+ }
+ mask |= MASK_MCMDVIO | MASK_MBUFVIO | MASK_MWDATERR |
+ MASK_MRDATERR | MASK_MRIDXERR | MASK_MRSPERR |
+ MASK_MCCSTO | MASK_MCRCSTO | MASK_MWDATTO |
+ MASK_MRDATTO | MASK_MRBSYTO | MASK_MRSPTO;
+
+ if (host->data) {
+ sh_mmcif_writel(host->addr, MMCIF_CE_BLOCK_SET, 0);
+ sh_mmcif_writel(host->addr, MMCIF_CE_BLOCK_SET,
+ mrq->data->blksz);
+ }
+ opc = sh_mmcif_set_cmd(host, mrq, cmd, opc);
+
+ sh_mmcif_writel(host->addr, MMCIF_CE_INT, 0xD80430C0);
+ sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, mask);
+ /* set arg */
+ sh_mmcif_writel(host->addr, MMCIF_CE_ARG, cmd->arg);
+ host->wait_int = 0;
+ /* set cmd */
+ sh_mmcif_writel(host->addr, MMCIF_CE_CMD_SET, opc);
+
+ time = wait_event_interruptible_timeout(host->intr_wait,
+ host->wait_int == 1 || host->sd_error == 1, host->timeout);
+ if (host->wait_int != 1 && time == 0) {
+ cmd->error = sh_mmcif_error_manage(host);
+ return;
+ }
+ if (host->sd_error) {
+ switch (cmd->opcode) {
+ case MMC_ALL_SEND_CID:
+ case MMC_SELECT_CARD:
+ case MMC_APP_CMD:
+ cmd->error = -ETIMEDOUT;
+ break;
+ default:
+ pr_debug("%s: Cmd(d'%d) err\n",
+ DRIVER_NAME, cmd->opcode);
+ cmd->error = sh_mmcif_error_manage(host);
+ break;
+ }
+ host->sd_error = 0;
+ host->wait_int = 0;
+ return;
+ }
+ if (!(cmd->flags & MMC_RSP_PRESENT)) {
+ cmd->error = ret;
+ host->wait_int = 0;
+ return;
+ }
+ if (host->wait_int == 1) {
+ sh_mmcif_get_response(host, cmd);
+ host->wait_int = 0;
+ }
+ if (host->data) {
+ ret = sh_mmcif_data_trans(host, mrq, cmd->opcode);
+ if (ret < 0)
+ mrq->data->bytes_xfered = 0;
+ else
+ mrq->data->bytes_xfered =
+ mrq->data->blocks * mrq->data->blksz;
+ }
+ cmd->error = ret;
+}
+
+static void sh_mmcif_stop_cmd(struct sh_mmcif_host *host,
+ struct mmc_request *mrq, struct mmc_command *cmd)
+{
+ long time;
+
+ if (mrq->cmd->opcode == MMC_READ_MULTIPLE_BLOCK)
+ sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MCMD12DRE);
+ else if (mrq->cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK)
+ sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MCMD12RBE);
+ else {
+ pr_err(DRIVER_NAME": not support stop cmd\n");
+ cmd->error = sh_mmcif_error_manage(host);
+ return;
+ }
+
+ time = wait_event_interruptible_timeout(host->intr_wait,
+ host->wait_int == 1 ||
+ host->sd_error == 1, host->timeout);
+ if (host->wait_int != 1 && (time == 0 || host->sd_error != 0)) {
+ cmd->error = sh_mmcif_error_manage(host);
+ return;
+ }
+ sh_mmcif_get_cmd12response(host, cmd);
+ host->wait_int = 0;
+ cmd->error = 0;
+}
+
+static void sh_mmcif_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct sh_mmcif_host *host = mmc_priv(mmc);
+
+ switch (mrq->cmd->opcode) {
+ /* MMCIF does not support SD/SDIO command */
+ case SD_IO_SEND_OP_COND:
+ case MMC_APP_CMD:
+ mrq->cmd->error = -ETIMEDOUT;
+ mmc_request_done(mmc, mrq);
+ return;
+ case MMC_SEND_EXT_CSD: /* = SD_SEND_IF_COND (8) */
+ if (!mrq->data) {
+ /* send_if_cond cmd (not support) */
+ mrq->cmd->error = -ETIMEDOUT;
+ mmc_request_done(mmc, mrq);
+ return;
+ }
+ break;
+ default:
+ break;
+ }
+ host->data = mrq->data;
+ sh_mmcif_start_cmd(host, mrq, mrq->cmd);
+ host->data = NULL;
+
+ if (mrq->cmd->error != 0) {
+ mmc_request_done(mmc, mrq);
+ return;
+ }
+ if (mrq->stop)
+ sh_mmcif_stop_cmd(host, mrq, mrq->stop);
+ mmc_request_done(mmc, mrq);
+}
+
+static void sh_mmcif_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct sh_mmcif_host *host = mmc_priv(mmc);
+ struct sh_mmcif_plat_data *p = host->pd->dev.platform_data;
+
+ if (ios->power_mode == MMC_POWER_OFF) {
+ /* clock stop */
+ sh_mmcif_clock_control(host, 0);
+ if (p->down_pwr)
+ p->down_pwr(host->pd);
+ return;
+ } else if (ios->power_mode == MMC_POWER_UP) {
+ if (p->set_pwr)
+ p->set_pwr(host->pd, ios->power_mode);
+ }
+
+ if (ios->clock)
+ sh_mmcif_clock_control(host, ios->clock);
+
+ host->bus_width = ios->bus_width;
+}
+
+static struct mmc_host_ops sh_mmcif_ops = {
+ .request = sh_mmcif_request,
+ .set_ios = sh_mmcif_set_ios,
+};
+
+static void sh_mmcif_detect(struct mmc_host *mmc)
+{
+ mmc_detect_change(mmc, 0);
+}
+
+static irqreturn_t sh_mmcif_intr(int irq, void *dev_id)
+{
+ struct sh_mmcif_host *host = dev_id;
+ u32 state = 0;
+ int err = 0;
+
+ state = sh_mmcif_readl(host->addr, MMCIF_CE_INT);
+
+ if (state & INT_RBSYE) {
+ sh_mmcif_writel(host->addr, MMCIF_CE_INT,
+ ~(INT_RBSYE | INT_CRSPE));
+ sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MRBSYE);
+ } else if (state & INT_CRSPE) {
+ sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_CRSPE);
+ sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MCRSPE);
+ } else if (state & INT_BUFREN) {
+ sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFREN);
+ sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFREN);
+ } else if (state & INT_BUFWEN) {
+ sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFWEN);
+ sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN);
+ } else if (state & INT_CMD12DRE) {
+ sh_mmcif_writel(host->addr, MMCIF_CE_INT,
+ ~(INT_CMD12DRE | INT_CMD12RBE |
+ INT_CMD12CRE | INT_BUFRE));
+ sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MCMD12DRE);
+ } else if (state & INT_BUFRE) {
+ sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFRE);
+ sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFRE);
+ } else if (state & INT_DTRANE) {
+ sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_DTRANE);
+ sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MDTRANE);
+ } else if (state & INT_CMD12RBE) {
+ sh_mmcif_writel(host->addr, MMCIF_CE_INT,
+ ~(INT_CMD12RBE | INT_CMD12CRE));
+ sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MCMD12RBE);
+ } else if (state & INT_ERR_STS) {
+ /* err interrupts */
+ sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~state);
+ sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, state);
+ err = 1;
+ } else {
+ pr_debug("%s: Not support int\n", DRIVER_NAME);
+ sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~state);
+ sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, state);
+ err = 1;
+ }
+ if (err) {
+ host->sd_error = 1;
+ pr_debug("%s: int err state = %08x\n", DRIVER_NAME, state);
+ }
+ host->wait_int = 1;
+ wake_up(&host->intr_wait);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit sh_mmcif_probe(struct platform_device *pdev)
+{
+ int ret = 0, irq[2];
+ struct mmc_host *mmc;
+ struct sh_mmcif_host *host = NULL;
+ struct sh_mmcif_plat_data *pd = NULL;
+ struct resource *res;
+ void __iomem *reg;
+ char clk_name[8];
+
+ irq[0] = platform_get_irq(pdev, 0);
+ irq[1] = platform_get_irq(pdev, 1);
+ if (irq[0] < 0 || irq[1] < 0) {
+ pr_err(DRIVER_NAME": Get irq error\n");
+ return -ENXIO;
+ }
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "platform_get_resource error.\n");
+ return -ENXIO;
+ }
+ reg = ioremap(res->start, resource_size(res));
+ if (!reg) {
+ dev_err(&pdev->dev, "ioremap error.\n");
+ return -ENOMEM;
+ }
+ pd = (struct sh_mmcif_plat_data *)(pdev->dev.platform_data);
+ if (!pd) {
+ dev_err(&pdev->dev, "sh_mmcif plat data error.\n");
+ ret = -ENXIO;
+ goto clean_up;
+ }
+ mmc = mmc_alloc_host(sizeof(struct sh_mmcif_host), &pdev->dev);
+ if (!mmc) {
+ ret = -ENOMEM;
+ goto clean_up;
+ }
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+ host->addr = reg;
+ host->timeout = 1000;
+
+ snprintf(clk_name, sizeof(clk_name), "mmc%d", pdev->id);
+ host->hclk = clk_get(&pdev->dev, clk_name);
+ if (IS_ERR(host->hclk)) {
+ dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
+ ret = PTR_ERR(host->hclk);
+ goto clean_up1;
+ }
+ clk_enable(host->hclk);
+ host->clk = clk_get_rate(host->hclk);
+ host->pd = pdev;
+
+ init_waitqueue_head(&host->intr_wait);
+
+ mmc->ops = &sh_mmcif_ops;
+ mmc->f_max = host->clk;
+ /* close to 400KHz */
+ if (mmc->f_max < 51200000)
+ mmc->f_min = mmc->f_max / 128;
+ else if (mmc->f_max < 102400000)
+ mmc->f_min = mmc->f_max / 256;
+ else
+ mmc->f_min = mmc->f_max / 512;
+ if (pd->ocr)
+ mmc->ocr_avail = pd->ocr;
+ mmc->caps = MMC_CAP_MMC_HIGHSPEED;
+ if (pd->caps)
+ mmc->caps |= pd->caps;
+ mmc->max_phys_segs = 128;
+ mmc->max_hw_segs = 128;
+ mmc->max_blk_size = 512;
+ mmc->max_blk_count = 65535;
+ mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+ mmc->max_seg_size = mmc->max_req_size;
+
+ sh_mmcif_sync_reset(host);
+ platform_set_drvdata(pdev, host);
+ mmc_add_host(mmc);
+
+ ret = request_irq(irq[0], sh_mmcif_intr, 0, "sh_mmc:error", host);
+ if (ret) {
+ pr_err(DRIVER_NAME": request_irq error (sh_mmc:error)\n");
+ goto clean_up2;
+ }
+ ret = request_irq(irq[1], sh_mmcif_intr, 0, "sh_mmc:int", host);
+ if (ret) {
+ free_irq(irq[0], host);
+ pr_err(DRIVER_NAME": request_irq error (sh_mmc:int)\n");
+ goto clean_up2;
+ }
+
+ sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
+ sh_mmcif_detect(host->mmc);
+
+ pr_info("%s: driver version %s\n", DRIVER_NAME, DRIVER_VERSION);
+ pr_debug("%s: chip ver H'%04x\n", DRIVER_NAME,
+ sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0x0000ffff);
+ return ret;
+
+clean_up2:
+ clk_disable(host->hclk);
+clean_up1:
+ mmc_free_host(mmc);
+clean_up:
+ if (reg)
+ iounmap(reg);
+ return ret;
+}
+
+static int __devexit sh_mmcif_remove(struct platform_device *pdev)
+{
+ struct sh_mmcif_host *host = platform_get_drvdata(pdev);
+ int irq[2];
+
+ sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
+
+ irq[0] = platform_get_irq(pdev, 0);
+ irq[1] = platform_get_irq(pdev, 1);
+
+ if (host->addr)
+ iounmap(host->addr);
+
+ platform_set_drvdata(pdev, NULL);
+ mmc_remove_host(host->mmc);
+
+ free_irq(irq[0], host);
+ free_irq(irq[1], host);
+
+ clk_disable(host->hclk);
+ mmc_free_host(host->mmc);
+
+ return 0;
+}
+
+static struct platform_driver sh_mmcif_driver = {
+ .probe = sh_mmcif_probe,
+ .remove = sh_mmcif_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+};
+
+static int __init sh_mmcif_init(void)
+{
+ return platform_driver_register(&sh_mmcif_driver);
+}
+
+static void __exit sh_mmcif_exit(void)
+{
+ platform_driver_unregister(&sh_mmcif_driver);
+}
+
+module_init(sh_mmcif_init);
+module_exit(sh_mmcif_exit);
+
+
+MODULE_DESCRIPTION("SuperH on-chip MMC/eMMC interface driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS(DRIVER_NAME);
+MODULE_AUTHOR("Yusuke Goda <yusuke.goda.sx@renesas.com>");
diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c
index 82554dd..cec9995 100644
--- a/drivers/mmc/host/tifm_sd.c
+++ b/drivers/mmc/host/tifm_sd.c
@@ -1032,7 +1032,7 @@
static int tifm_sd_suspend(struct tifm_dev *sock, pm_message_t state)
{
- return mmc_suspend_host(tifm_get_drvdata(sock), state);
+ return mmc_suspend_host(tifm_get_drvdata(sock));
}
static int tifm_sd_resume(struct tifm_dev *sock)
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index 883fcac..ee7d0a5 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -768,7 +768,7 @@
struct mmc_host *mmc = platform_get_drvdata(dev);
int ret;
- ret = mmc_suspend_host(mmc, state);
+ ret = mmc_suspend_host(mmc);
/* Tell MFD core it can disable us now.*/
if (!ret && cell->disable)
diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
index 632858a..19f2d72 100644
--- a/drivers/mmc/host/via-sdmmc.c
+++ b/drivers/mmc/host/via-sdmmc.c
@@ -1280,7 +1280,7 @@
via_save_pcictrlreg(host);
via_save_sdcreg(host);
- ret = mmc_suspend_host(host->mmc, state);
+ ret = mmc_suspend_host(host->mmc);
pci_save_state(pcidev);
pci_enable_wake(pcidev, pci_choose_state(pcidev, state), 0);
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index 69efe01..0012f5d 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -1819,7 +1819,7 @@
{
BUG_ON(host == NULL);
- return mmc_suspend_host(host->mmc, state);
+ return mmc_suspend_host(host->mmc);
}
static int wbsd_resume(struct wbsd_host *host)
diff --git a/drivers/mtd/maps/pismo.c b/drivers/mtd/maps/pismo.c
index eb476b7..f4ce273 100644
--- a/drivers/mtd/maps/pismo.c
+++ b/drivers/mtd/maps/pismo.c
@@ -234,7 +234,6 @@
/* FIXME: set_vpp needs saner arguments */
pismo_setvpp_remove_fix(pismo);
- i2c_set_clientdata(client, NULL);
kfree(pismo);
return 0;
@@ -286,7 +285,6 @@
return 0;
exit_free:
- i2c_set_clientdata(client, NULL);
kfree(pismo);
return ret;
}
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 000d65e..91c8013 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -404,14 +404,9 @@
if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
return -EINVAL;
- ops.oobbuf = kmalloc(length, GFP_KERNEL);
- if (!ops.oobbuf)
- return -ENOMEM;
-
- if (copy_from_user(ops.oobbuf, ptr, length)) {
- kfree(ops.oobbuf);
- return -EFAULT;
- }
+ ops.oobbuf = memdup_user(ptr, length);
+ if (IS_ERR(ops.oobbuf))
+ return PTR_ERR(ops.oobbuf);
start &= ~((uint64_t)mtd->oobsize - 1);
ret = mtd->write_oob(mtd, start, &ops);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 98a04b3..ffc3720 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -1,13 +1,3 @@
-menuconfig MTD_NAND
- tristate "NAND Device Support"
- depends on MTD
- select MTD_NAND_IDS
- select MTD_NAND_ECC
- help
- This enables support for accessing all type of NAND flash
- devices. For further information see
- <http://www.linux-mtd.infradead.org/doc/nand.html>.
-
config MTD_NAND_ECC
tristate
@@ -19,6 +9,17 @@
Software ECC according to the Smart Media Specification.
The original Linux implementation had byte 0 and 1 swapped.
+
+menuconfig MTD_NAND
+ tristate "NAND Device Support"
+ depends on MTD
+ select MTD_NAND_IDS
+ select MTD_NAND_ECC
+ help
+ This enables support for accessing all type of NAND flash
+ devices. For further information see
+ <http://www.linux-mtd.infradead.org/doc/nand.html>.
+
if MTD_NAND
config MTD_NAND_VERIFY_WRITE
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 00aea6f..1312eda 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -232,7 +232,7 @@
if (!fun)
return -ENOMEM;
- ret = of_address_to_resource(ofdev->node, 0, &io_res);
+ ret = of_address_to_resource(ofdev->dev.of_node, 0, &io_res);
if (ret) {
dev_err(&ofdev->dev, "can't get IO base\n");
goto err1;
@@ -244,7 +244,8 @@
goto err1;
}
- prop = of_get_property(ofdev->node, "fsl,upm-addr-offset", &size);
+ prop = of_get_property(ofdev->dev.of_node, "fsl,upm-addr-offset",
+ &size);
if (!prop || size != sizeof(uint32_t)) {
dev_err(&ofdev->dev, "can't get UPM address offset\n");
ret = -EINVAL;
@@ -252,7 +253,7 @@
}
fun->upm_addr_offset = *prop;
- prop = of_get_property(ofdev->node, "fsl,upm-cmd-offset", &size);
+ prop = of_get_property(ofdev->dev.of_node, "fsl,upm-cmd-offset", &size);
if (!prop || size != sizeof(uint32_t)) {
dev_err(&ofdev->dev, "can't get UPM command offset\n");
ret = -EINVAL;
@@ -260,7 +261,7 @@
}
fun->upm_cmd_offset = *prop;
- prop = of_get_property(ofdev->node,
+ prop = of_get_property(ofdev->dev.of_node,
"fsl,upm-addr-line-cs-offsets", &size);
if (prop && (size / sizeof(uint32_t)) > 0) {
fun->mchip_count = size / sizeof(uint32_t);
@@ -276,7 +277,7 @@
for (i = 0; i < fun->mchip_count; i++) {
fun->rnb_gpio[i] = -1;
- rnb_gpio = of_get_gpio(ofdev->node, i);
+ rnb_gpio = of_get_gpio(ofdev->dev.of_node, i);
if (rnb_gpio >= 0) {
ret = gpio_request(rnb_gpio, dev_name(&ofdev->dev));
if (ret) {
@@ -292,13 +293,13 @@
}
}
- prop = of_get_property(ofdev->node, "chip-delay", NULL);
+ prop = of_get_property(ofdev->dev.of_node, "chip-delay", NULL);
if (prop)
fun->chip_delay = *prop;
else
fun->chip_delay = 50;
- prop = of_get_property(ofdev->node, "fsl,upm-wait-flags", &size);
+ prop = of_get_property(ofdev->dev.of_node, "fsl,upm-wait-flags", &size);
if (prop && size == sizeof(uint32_t))
fun->wait_flags = *prop;
else
@@ -315,7 +316,7 @@
fun->dev = &ofdev->dev;
fun->last_ctrl = NAND_CLE;
- ret = fun_chip_init(fun, ofdev->node, &io_res);
+ ret = fun_chip_init(fun, ofdev->dev.of_node, &io_res);
if (ret)
goto err2;
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index 3d0867d..0a130dc 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -650,7 +650,7 @@
static int __devinit mpc5121_nfc_probe(struct of_device *op,
const struct of_device_id *match)
{
- struct device_node *rootnode, *dn = op->node;
+ struct device_node *rootnode, *dn = op->dev.of_node;
struct device *dev = &op->dev;
struct mpc5121_nfc_prv *prv;
struct resource res;
@@ -889,12 +889,12 @@
};
static struct of_platform_driver mpc5121_nfc_driver = {
- .match_table = mpc5121_nfc_match,
.probe = mpc5121_nfc_probe,
.remove = __devexit_p(mpc5121_nfc_remove),
.driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = mpc5121_nfc_match,
},
};
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index 78a4232..bcfc851 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -150,7 +150,6 @@
if (dev->phys_dma_addr && dev->phys_dma_addr != dev->phys_bounce_buffer)
pci_unmap_single(dev->pci_dev, dev->phys_dma_addr, R852_DMA_LEN,
dev->dma_dir ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE);
- complete(&dev->dma_done);
}
/*
@@ -182,6 +181,7 @@
/* Set dma direction */
dev->dma_dir = do_read;
dev->dma_stage = 1;
+ INIT_COMPLETION(dev->dma_done);
dbg_verbose("doing dma %s ", do_read ? "read" : "write");
@@ -494,6 +494,11 @@
if (dev->card_unstable)
return 0;
+ if (dev->dma_error) {
+ dev->dma_error = 0;
+ return -1;
+ }
+
r852_write_reg(dev, R852_CTL, dev->ctlreg | R852_CTL_ECC_ACCESS);
ecc_reg = r852_read_reg_dword(dev, R852_DATALINE);
r852_write_reg(dev, R852_CTL, dev->ctlreg);
@@ -707,6 +712,7 @@
container_of(work, struct r852_device, card_detect_work.work);
r852_card_update_present(dev);
+ r852_update_card_detect(dev);
dev->card_unstable = 0;
/* False alarm */
@@ -722,7 +728,6 @@
else
r852_unregister_nand_device(dev);
exit:
- /* Update detection logic */
r852_update_card_detect(dev);
}
@@ -796,6 +801,7 @@
if (dma_status & R852_DMA_IRQ_ERROR) {
dbg("recieved dma error IRQ");
r852_dma_done(dev, -EIO);
+ complete(&dev->dma_done);
goto out;
}
@@ -825,8 +831,10 @@
r852_dma_enable(dev);
/* Operation done */
- if (dev->dma_stage == 3)
+ if (dev->dma_stage == 3) {
r852_dma_done(dev, 0);
+ complete(&dev->dma_done);
+ }
goto out;
}
@@ -940,18 +948,19 @@
r852_dma_test(dev);
+ dev->irq = pci_dev->irq;
+ spin_lock_init(&dev->irqlock);
+
+ dev->card_detected = 0;
+ r852_card_update_present(dev);
+
/*register irq handler*/
error = -ENODEV;
if (request_irq(pci_dev->irq, &r852_irq, IRQF_SHARED,
DRV_NAME, dev))
goto error10;
- dev->irq = pci_dev->irq;
- spin_lock_init(&dev->irqlock);
-
/* kick initial present test */
- dev->card_detected = 0;
- r852_card_update_present(dev);
queue_delayed_work(dev->card_workqueue,
&dev->card_detect_work, 0);
@@ -1081,7 +1090,7 @@
dev->card_detected ? "added" : "removed");
queue_delayed_work(dev->card_workqueue,
- &dev->card_detect_work, 1000);
+ &dev->card_detect_work, msecs_to_jiffies(1000));
return 0;
}
diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c
index 884852d..cc728b1 100644
--- a/drivers/mtd/nand/socrates_nand.c
+++ b/drivers/mtd/nand/socrates_nand.c
@@ -183,7 +183,7 @@
return -ENOMEM;
}
- host->io_base = of_iomap(ofdev->node, 0);
+ host->io_base = of_iomap(ofdev->dev.of_node, 0);
if (host->io_base == NULL) {
printk(KERN_ERR "socrates_nand: ioremap failed\n");
kfree(host);
@@ -244,7 +244,7 @@
#ifdef CONFIG_MTD_OF_PARTS
if (num_partitions == 0) {
num_partitions = of_mtd_parse_partitions(&ofdev->dev,
- ofdev->node,
+ ofdev->dev.of_node,
&partitions);
if (num_partitions < 0) {
res = num_partitions;
diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c
index 72ebb3f..4dfa6b9 100644
--- a/drivers/mtd/ubi/cdev.c
+++ b/drivers/mtd/ubi/cdev.c
@@ -189,8 +189,7 @@
return new_offset;
}
-static int vol_cdev_fsync(struct file *file, struct dentry *dentry,
- int datasync)
+static int vol_cdev_fsync(struct file *file, int datasync)
{
struct ubi_volume_desc *desc = file->private_data;
struct ubi_device *ubi = desc->vol->ubi;
diff --git a/drivers/net/3c507.c b/drivers/net/3c507.c
index 82eaf65..ea9b7a0 100644
--- a/drivers/net/3c507.c
+++ b/drivers/net/3c507.c
@@ -551,8 +551,7 @@
void __iomem *shmem;
if (dev == NULL) {
- pr_err("%s: net_interrupt(): irq %d for unknown device.\n",
- dev->name, irq);
+ pr_err("net_interrupt(): irq %d for unknown device.\n", irq);
return IRQ_NONE;
}
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 9c14975..284a5f4 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -598,8 +598,8 @@
goto rx_status_loop;
spin_lock_irqsave(&cp->lock, flags);
- cpw16_f(IntrMask, cp_intr_mask);
__napi_complete(napi);
+ cpw16_f(IntrMask, cp_intr_mask);
spin_unlock_irqrestore(&cp->lock, flags);
}
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 4ba7293..97d8068 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -860,6 +860,7 @@
}
/* if unknown chip, assume array element #0, original RTL-8139 in this case */
+ i = 0;
dev_dbg(&pdev->dev, "unknown chip version, assuming RTL-8139\n");
dev_dbg(&pdev->dev, "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
tp->chipset = 0;
@@ -2088,8 +2089,8 @@
* again when we think we are done.
*/
spin_lock_irqsave(&tp->lock, flags);
- RTL_W16_F(IntrMask, rtl8139_intr_mask);
__napi_complete(napi);
+ RTL_W16_F(IntrMask, rtl8139_intr_mask);
spin_unlock_irqrestore(&tp->lock, flags);
}
spin_unlock(&tp->rx_lock);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 2decc59..ce2fcdd 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2754,6 +2754,7 @@
config NETXEN_NIC
tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
depends on PCI
+ select FW_LOADER
help
This enables the support for NetXen's Gigabit Ethernet card.
@@ -2819,6 +2820,7 @@
config QLCNIC
tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
depends on PCI
+ select FW_LOADER
help
This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
devices.
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index c911bfb..b9ad799 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -294,7 +294,7 @@
} else {
return 0;
}
- } while (timeout < 20);
+ } while (timeout < 40);
dev_err(&adapter->pdev->dev, "POST timeout; stage=0x%x\n", stage);
return -1;
@@ -1429,7 +1429,7 @@
wrb = wrb_from_mccq(adapter);
if (!wrb) {
status = -EBUSY;
- goto err;
+ goto err_unlock;
}
req = cmd->va;
sge = nonembedded_sgl(wrb);
@@ -1457,7 +1457,10 @@
else
status = adapter->flash_status;
-err:
+ return status;
+
+err_unlock:
+ spin_unlock_bh(&adapter->mcc_lock);
return status;
}
@@ -1497,7 +1500,7 @@
return status;
}
-extern int be_cmd_enable_magic_wol(struct be_adapter *adapter, u8 *mac,
+int be_cmd_enable_magic_wol(struct be_adapter *adapter, u8 *mac,
struct be_dma_mem *nonemb_cmd)
{
struct be_mcc_wrb *wrb;
@@ -1590,7 +1593,7 @@
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL,
OPCODE_LOWLEVEL_LOOPBACK_TEST, sizeof(*req));
- req->hdr.timeout = 4;
+ req->hdr.timeout = cpu_to_le32(4);
req->pattern = cpu_to_le64(pattern);
req->src_port = cpu_to_le32(port_num);
@@ -1662,7 +1665,7 @@
return status;
}
-extern int be_cmd_get_seeprom_data(struct be_adapter *adapter,
+int be_cmd_get_seeprom_data(struct be_adapter *adapter,
struct be_dma_mem *nonemb_cmd)
{
struct be_mcc_wrb *wrb;
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index aa065c7..54b1427 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1861,7 +1861,7 @@
goto if_destroy;
}
vf++;
- } while (vf < num_vfs);
+ }
} else if (!be_physfn(adapter)) {
status = be_cmd_mac_addr_query(adapter, mac,
MAC_ADDRESS_TYPE_NETWORK, false, adapter->if_handle);
diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c
index 39250b2..959add2 100644
--- a/drivers/net/bmac.c
+++ b/drivers/net/bmac.c
@@ -1654,8 +1654,11 @@
static struct macio_driver bmac_driver =
{
- .name = "bmac",
- .match_table = bmac_match,
+ .driver = {
+ .name = "bmac",
+ .owner = THIS_MODULE,
+ .of_match_table = bmac_match,
+ },
.probe = bmac_probe,
.remove = bmac_remove,
#ifdef CONFIG_PM
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 188e356..1174322 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -247,6 +247,7 @@
MODULE_DEVICE_TABLE(pci, bnx2_pci_tbl);
static void bnx2_init_napi(struct bnx2 *bp);
+static void bnx2_del_napi(struct bnx2 *bp);
static inline u32 bnx2_tx_avail(struct bnx2 *bp, struct bnx2_tx_ring_info *txr)
{
@@ -3072,7 +3073,6 @@
u16 hw_cons, sw_cons, sw_ring_cons, sw_prod, sw_ring_prod;
struct l2_fhdr *rx_hdr;
int rx_pkt = 0, pg_ring_used = 0;
- struct pci_dev *pdev = bp->pdev;
hw_cons = bnx2_get_hw_rx_cons(bnapi);
sw_cons = rxr->rx_cons;
@@ -3098,12 +3098,10 @@
skb = rx_buf->skb;
prefetchw(skb);
- if (!get_dma_ops(&pdev->dev)->sync_single_for_cpu) {
- next_rx_buf =
- &rxr->rx_buf_ring[
- RX_RING_IDX(NEXT_RX_BD(sw_cons))];
- prefetch(next_rx_buf->desc);
- }
+ next_rx_buf =
+ &rxr->rx_buf_ring[RX_RING_IDX(NEXT_RX_BD(sw_cons))];
+ prefetch(next_rx_buf->desc);
+
rx_buf->skb = NULL;
dma_addr = dma_unmap_addr(rx_buf, mapping);
@@ -6270,6 +6268,7 @@
bnx2_free_skbs(bp);
bnx2_free_irq(bp);
bnx2_free_mem(bp);
+ bnx2_del_napi(bp);
return rc;
}
@@ -6537,6 +6536,7 @@
bnx2_free_irq(bp);
bnx2_free_skbs(bp);
bnx2_free_mem(bp);
+ bnx2_del_napi(bp);
bp->link_up = 0;
netif_carrier_off(bp->dev);
bnx2_set_power_state(bp, PCI_D3hot);
@@ -8227,7 +8227,16 @@
return str;
}
-static void __devinit
+static void
+bnx2_del_napi(struct bnx2 *bp)
+{
+ int i;
+
+ for (i = 0; i < bp->irq_nvecs; i++)
+ netif_napi_del(&bp->bnx2_napi[i].napi);
+}
+
+static void
bnx2_init_napi(struct bnx2 *bp)
{
int i;
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 40fdc41..df48307 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -340,7 +340,8 @@
if ((client_info->assigned) &&
(client_info->ip_src == arp->ip_dst) &&
- (client_info->ip_dst == arp->ip_src)) {
+ (client_info->ip_dst == arp->ip_src) &&
+ (compare_ether_addr_64bits(client_info->mac_dst, arp->mac_src))) {
/* update the clients MAC address */
memcpy(client_info->mac_dst, arp->mac_src, ETH_ALEN);
client_info->ntt = 1;
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 5e12462..c3d98dd 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -168,7 +168,7 @@
static int bond_mode = BOND_MODE_ROUNDROBIN;
static int xmit_hashtype = BOND_XMIT_POLICY_LAYER2;
static int lacp_fast;
-
+static int disable_netpoll = 1;
const struct bond_parm_tbl bond_lacp_tbl[] = {
{ "slow", AD_LACP_SLOW},
@@ -1742,15 +1742,23 @@
bond_set_carrier(bond);
#ifdef CONFIG_NET_POLL_CONTROLLER
- if (slaves_support_netpoll(bond_dev)) {
- bond_dev->priv_flags &= ~IFF_DISABLE_NETPOLL;
- if (bond_dev->npinfo)
- slave_dev->npinfo = bond_dev->npinfo;
- } else if (!(bond_dev->priv_flags & IFF_DISABLE_NETPOLL)) {
+ /*
+ * Netpoll and bonding is broken, make sure it is not initialized
+ * until it is fixed.
+ */
+ if (disable_netpoll) {
bond_dev->priv_flags |= IFF_DISABLE_NETPOLL;
- pr_info("New slave device %s does not support netpoll\n",
- slave_dev->name);
- pr_info("Disabling netpoll support for %s\n", bond_dev->name);
+ } else {
+ if (slaves_support_netpoll(bond_dev)) {
+ bond_dev->priv_flags &= ~IFF_DISABLE_NETPOLL;
+ if (bond_dev->npinfo)
+ slave_dev->npinfo = bond_dev->npinfo;
+ } else if (!(bond_dev->priv_flags & IFF_DISABLE_NETPOLL)) {
+ bond_dev->priv_flags |= IFF_DISABLE_NETPOLL;
+ pr_info("New slave device %s does not support netpoll\n",
+ slave_dev->name);
+ pr_info("Disabling netpoll support for %s\n", bond_dev->name);
+ }
}
#endif
read_unlock(&bond->lock);
@@ -1950,8 +1958,11 @@
#ifdef CONFIG_NET_POLL_CONTROLLER
read_lock_bh(&bond->lock);
- if (slaves_support_netpoll(bond_dev))
- bond_dev->priv_flags &= ~IFF_DISABLE_NETPOLL;
+
+ /* Make sure netpoll over stays disabled until fixed. */
+ if (!disable_netpoll)
+ if (slaves_support_netpoll(bond_dev))
+ bond_dev->priv_flags &= ~IFF_DISABLE_NETPOLL;
read_unlock_bh(&bond->lock);
if (slave_dev->netdev_ops->ndo_netpoll_cleanup)
slave_dev->netdev_ops->ndo_netpoll_cleanup(slave_dev);
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 05b7517..2c5227c 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -63,6 +63,16 @@
To compile this driver as a module, choose M here: the
module will be called bfin_can.
+config CAN_JANZ_ICAN3
+ tristate "Janz VMOD-ICAN3 Intelligent CAN controller"
+ depends on CAN_DEV && MFD_JANZ_CMODIO
+ ---help---
+ Driver for Janz VMOD-ICAN3 Intelligent CAN controller module, which
+ connects to a MODULbus carrier board.
+
+ This driver can also be built as a module. If so, the module will be
+ called janz-ican3.ko.
+
source "drivers/net/can/mscan/Kconfig"
source "drivers/net/can/sja1000/Kconfig"
diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile
index 7a702f2..9047cd0 100644
--- a/drivers/net/can/Makefile
+++ b/drivers/net/can/Makefile
@@ -15,5 +15,6 @@
obj-$(CONFIG_CAN_TI_HECC) += ti_hecc.o
obj-$(CONFIG_CAN_MCP251X) += mcp251x.o
obj-$(CONFIG_CAN_BFIN) += bfin_can.o
+obj-$(CONFIG_CAN_JANZ_ICAN3) += janz-ican3.o
ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c
new file mode 100644
index 0000000..6e533dc
--- /dev/null
+++ b/drivers/net/can/janz-ican3.c
@@ -0,0 +1,1830 @@
+/*
+ * Janz MODULbus VMOD-ICAN3 CAN Interface Driver
+ *
+ * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#include <linux/netdevice.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+
+#include <linux/mfd/janz.h>
+
+/* the DPM has 64k of memory, organized into 256x 256 byte pages */
+#define DPM_NUM_PAGES 256
+#define DPM_PAGE_SIZE 256
+#define DPM_PAGE_ADDR(p) ((p) * DPM_PAGE_SIZE)
+
+/* JANZ ICAN3 "old-style" host interface queue page numbers */
+#define QUEUE_OLD_CONTROL 0
+#define QUEUE_OLD_RB0 1
+#define QUEUE_OLD_RB1 2
+#define QUEUE_OLD_WB0 3
+#define QUEUE_OLD_WB1 4
+
+/* Janz ICAN3 "old-style" host interface control registers */
+#define MSYNC_PEER 0x00 /* ICAN only */
+#define MSYNC_LOCL 0x01 /* host only */
+#define TARGET_RUNNING 0x02
+
+#define MSYNC_RB0 0x01
+#define MSYNC_RB1 0x02
+#define MSYNC_RBLW 0x04
+#define MSYNC_RB_MASK (MSYNC_RB0 | MSYNC_RB1)
+
+#define MSYNC_WB0 0x10
+#define MSYNC_WB1 0x20
+#define MSYNC_WBLW 0x40
+#define MSYNC_WB_MASK (MSYNC_WB0 | MSYNC_WB1)
+
+/* Janz ICAN3 "new-style" host interface queue page numbers */
+#define QUEUE_TOHOST 5
+#define QUEUE_FROMHOST_MID 6
+#define QUEUE_FROMHOST_HIGH 7
+#define QUEUE_FROMHOST_LOW 8
+
+/* The first free page in the DPM is #9 */
+#define DPM_FREE_START 9
+
+/* Janz ICAN3 "new-style" and "fast" host interface descriptor flags */
+#define DESC_VALID 0x80
+#define DESC_WRAP 0x40
+#define DESC_INTERRUPT 0x20
+#define DESC_IVALID 0x10
+#define DESC_LEN(len) (len)
+
+/* Janz ICAN3 Firmware Messages */
+#define MSG_CONNECTI 0x02
+#define MSG_DISCONNECT 0x03
+#define MSG_IDVERS 0x04
+#define MSG_MSGLOST 0x05
+#define MSG_NEWHOSTIF 0x08
+#define MSG_INQUIRY 0x0a
+#define MSG_SETAFILMASK 0x10
+#define MSG_INITFDPMQUEUE 0x11
+#define MSG_HWCONF 0x12
+#define MSG_FMSGLOST 0x15
+#define MSG_CEVTIND 0x37
+#define MSG_CBTRREQ 0x41
+#define MSG_COFFREQ 0x42
+#define MSG_CONREQ 0x43
+#define MSG_CCONFREQ 0x47
+
+/*
+ * Janz ICAN3 CAN Inquiry Message Types
+ *
+ * NOTE: there appears to be a firmware bug here. You must send
+ * NOTE: INQUIRY_STATUS and expect to receive an INQUIRY_EXTENDED
+ * NOTE: response. The controller never responds to a message with
+ * NOTE: the INQUIRY_EXTENDED subspec :(
+ */
+#define INQUIRY_STATUS 0x00
+#define INQUIRY_TERMINATION 0x01
+#define INQUIRY_EXTENDED 0x04
+
+/* Janz ICAN3 CAN Set Acceptance Filter Mask Message Types */
+#define SETAFILMASK_REJECT 0x00
+#define SETAFILMASK_FASTIF 0x02
+
+/* Janz ICAN3 CAN Hardware Configuration Message Types */
+#define HWCONF_TERMINATE_ON 0x01
+#define HWCONF_TERMINATE_OFF 0x00
+
+/* Janz ICAN3 CAN Event Indication Message Types */
+#define CEVTIND_EI 0x01
+#define CEVTIND_DOI 0x02
+#define CEVTIND_LOST 0x04
+#define CEVTIND_FULL 0x08
+#define CEVTIND_BEI 0x10
+
+#define CEVTIND_CHIP_SJA1000 0x02
+
+#define ICAN3_BUSERR_QUOTA_MAX 255
+
+/* Janz ICAN3 CAN Frame Conversion */
+#define ICAN3_ECHO 0x10
+#define ICAN3_EFF_RTR 0x40
+#define ICAN3_SFF_RTR 0x10
+#define ICAN3_EFF 0x80
+
+#define ICAN3_CAN_TYPE_MASK 0x0f
+#define ICAN3_CAN_TYPE_SFF 0x00
+#define ICAN3_CAN_TYPE_EFF 0x01
+
+#define ICAN3_CAN_DLC_MASK 0x0f
+
+/*
+ * SJA1000 Status and Error Register Definitions
+ *
+ * Copied from drivers/net/can/sja1000/sja1000.h
+ */
+
+/* status register content */
+#define SR_BS 0x80
+#define SR_ES 0x40
+#define SR_TS 0x20
+#define SR_RS 0x10
+#define SR_TCS 0x08
+#define SR_TBS 0x04
+#define SR_DOS 0x02
+#define SR_RBS 0x01
+
+#define SR_CRIT (SR_BS|SR_ES)
+
+/* ECC register */
+#define ECC_SEG 0x1F
+#define ECC_DIR 0x20
+#define ECC_ERR 6
+#define ECC_BIT 0x00
+#define ECC_FORM 0x40
+#define ECC_STUFF 0x80
+#define ECC_MASK 0xc0
+
+/* Number of buffers for use in the "new-style" host interface */
+#define ICAN3_NEW_BUFFERS 16
+
+/* Number of buffers for use in the "fast" host interface */
+#define ICAN3_TX_BUFFERS 512
+#define ICAN3_RX_BUFFERS 1024
+
+/* SJA1000 Clock Input */
+#define ICAN3_CAN_CLOCK 8000000
+
+/* Driver Name */
+#define DRV_NAME "janz-ican3"
+
+/* DPM Control Registers -- starts at offset 0x100 in the MODULbus registers */
+struct ican3_dpm_control {
+ /* window address register */
+ u8 window_address;
+ u8 unused1;
+
+ /*
+ * Read access: clear interrupt from microcontroller
+ * Write access: send interrupt to microcontroller
+ */
+ u8 interrupt;
+ u8 unused2;
+
+ /* write-only: reset all hardware on the module */
+ u8 hwreset;
+ u8 unused3;
+
+ /* write-only: generate an interrupt to the TPU */
+ u8 tpuinterrupt;
+};
+
+struct ican3_dev {
+
+ /* must be the first member */
+ struct can_priv can;
+
+ /* CAN network device */
+ struct net_device *ndev;
+ struct napi_struct napi;
+
+ /* Device for printing */
+ struct device *dev;
+
+ /* module number */
+ unsigned int num;
+
+ /* base address of registers and IRQ */
+ struct janz_cmodio_onboard_regs __iomem *ctrl;
+ struct ican3_dpm_control __iomem *dpmctrl;
+ void __iomem *dpm;
+ int irq;
+
+ /* CAN bus termination status */
+ struct completion termination_comp;
+ bool termination_enabled;
+
+ /* CAN bus error status registers */
+ struct completion buserror_comp;
+ struct can_berr_counter bec;
+
+ /* old and new style host interface */
+ unsigned int iftype;
+
+ /*
+ * Any function which changes the current DPM page must hold this
+ * lock while it is performing data accesses. This ensures that the
+ * function will not be preempted and end up reading data from a
+ * different DPM page than it expects.
+ */
+ spinlock_t lock;
+
+ /* new host interface */
+ unsigned int rx_int;
+ unsigned int rx_num;
+ unsigned int tx_num;
+
+ /* fast host interface */
+ unsigned int fastrx_start;
+ unsigned int fastrx_int;
+ unsigned int fastrx_num;
+ unsigned int fasttx_start;
+ unsigned int fasttx_num;
+
+ /* first free DPM page */
+ unsigned int free_page;
+};
+
+struct ican3_msg {
+ u8 control;
+ u8 spec;
+ __le16 len;
+ u8 data[252];
+};
+
+struct ican3_new_desc {
+ u8 control;
+ u8 pointer;
+};
+
+struct ican3_fast_desc {
+ u8 control;
+ u8 command;
+ u8 data[14];
+};
+
+/* write to the window basic address register */
+static inline void ican3_set_page(struct ican3_dev *mod, unsigned int page)
+{
+ BUG_ON(page >= DPM_NUM_PAGES);
+ iowrite8(page, &mod->dpmctrl->window_address);
+}
+
+/*
+ * ICAN3 "old-style" host interface
+ */
+
+/*
+ * Recieve a message from the ICAN3 "old-style" firmware interface
+ *
+ * LOCKING: must hold mod->lock
+ *
+ * returns 0 on success, -ENOMEM when no message exists
+ */
+static int ican3_old_recv_msg(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+ unsigned int mbox, mbox_page;
+ u8 locl, peer, xord;
+
+ /* get the MSYNC registers */
+ ican3_set_page(mod, QUEUE_OLD_CONTROL);
+ peer = ioread8(mod->dpm + MSYNC_PEER);
+ locl = ioread8(mod->dpm + MSYNC_LOCL);
+ xord = locl ^ peer;
+
+ if ((xord & MSYNC_RB_MASK) == 0x00) {
+ dev_dbg(mod->dev, "no mbox for reading\n");
+ return -ENOMEM;
+ }
+
+ /* find the first free mbox to read */
+ if ((xord & MSYNC_RB_MASK) == MSYNC_RB_MASK)
+ mbox = (xord & MSYNC_RBLW) ? MSYNC_RB0 : MSYNC_RB1;
+ else
+ mbox = (xord & MSYNC_RB0) ? MSYNC_RB0 : MSYNC_RB1;
+
+ /* copy the message */
+ mbox_page = (mbox == MSYNC_RB0) ? QUEUE_OLD_RB0 : QUEUE_OLD_RB1;
+ ican3_set_page(mod, mbox_page);
+ memcpy_fromio(msg, mod->dpm, sizeof(*msg));
+
+ /*
+ * notify the firmware that the read buffer is available
+ * for it to fill again
+ */
+ locl ^= mbox;
+
+ ican3_set_page(mod, QUEUE_OLD_CONTROL);
+ iowrite8(locl, mod->dpm + MSYNC_LOCL);
+ return 0;
+}
+
+/*
+ * Send a message through the "old-style" firmware interface
+ *
+ * LOCKING: must hold mod->lock
+ *
+ * returns 0 on success, -ENOMEM when no free space exists
+ */
+static int ican3_old_send_msg(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+ unsigned int mbox, mbox_page;
+ u8 locl, peer, xord;
+
+ /* get the MSYNC registers */
+ ican3_set_page(mod, QUEUE_OLD_CONTROL);
+ peer = ioread8(mod->dpm + MSYNC_PEER);
+ locl = ioread8(mod->dpm + MSYNC_LOCL);
+ xord = locl ^ peer;
+
+ if ((xord & MSYNC_WB_MASK) == MSYNC_WB_MASK) {
+ dev_err(mod->dev, "no mbox for writing\n");
+ return -ENOMEM;
+ }
+
+ /* calculate a free mbox to use */
+ mbox = (xord & MSYNC_WB0) ? MSYNC_WB1 : MSYNC_WB0;
+
+ /* copy the message to the DPM */
+ mbox_page = (mbox == MSYNC_WB0) ? QUEUE_OLD_WB0 : QUEUE_OLD_WB1;
+ ican3_set_page(mod, mbox_page);
+ memcpy_toio(mod->dpm, msg, sizeof(*msg));
+
+ locl ^= mbox;
+ if (mbox == MSYNC_WB1)
+ locl |= MSYNC_WBLW;
+
+ ican3_set_page(mod, QUEUE_OLD_CONTROL);
+ iowrite8(locl, mod->dpm + MSYNC_LOCL);
+ return 0;
+}
+
+/*
+ * ICAN3 "new-style" Host Interface Setup
+ */
+
+static void __devinit ican3_init_new_host_interface(struct ican3_dev *mod)
+{
+ struct ican3_new_desc desc;
+ unsigned long flags;
+ void __iomem *dst;
+ int i;
+
+ spin_lock_irqsave(&mod->lock, flags);
+
+ /* setup the internal datastructures for RX */
+ mod->rx_num = 0;
+ mod->rx_int = 0;
+
+ /* tohost queue descriptors are in page 5 */
+ ican3_set_page(mod, QUEUE_TOHOST);
+ dst = mod->dpm;
+
+ /* initialize the tohost (rx) queue descriptors: pages 9-24 */
+ for (i = 0; i < ICAN3_NEW_BUFFERS; i++) {
+ desc.control = DESC_INTERRUPT | DESC_LEN(1); /* I L=1 */
+ desc.pointer = mod->free_page;
+
+ /* set wrap flag on last buffer */
+ if (i == ICAN3_NEW_BUFFERS - 1)
+ desc.control |= DESC_WRAP;
+
+ memcpy_toio(dst, &desc, sizeof(desc));
+ dst += sizeof(desc);
+ mod->free_page++;
+ }
+
+ /* fromhost (tx) mid queue descriptors are in page 6 */
+ ican3_set_page(mod, QUEUE_FROMHOST_MID);
+ dst = mod->dpm;
+
+ /* setup the internal datastructures for TX */
+ mod->tx_num = 0;
+
+ /* initialize the fromhost mid queue descriptors: pages 25-40 */
+ for (i = 0; i < ICAN3_NEW_BUFFERS; i++) {
+ desc.control = DESC_VALID | DESC_LEN(1); /* V L=1 */
+ desc.pointer = mod->free_page;
+
+ /* set wrap flag on last buffer */
+ if (i == ICAN3_NEW_BUFFERS - 1)
+ desc.control |= DESC_WRAP;
+
+ memcpy_toio(dst, &desc, sizeof(desc));
+ dst += sizeof(desc);
+ mod->free_page++;
+ }
+
+ /* fromhost hi queue descriptors are in page 7 */
+ ican3_set_page(mod, QUEUE_FROMHOST_HIGH);
+ dst = mod->dpm;
+
+ /* initialize only a single buffer in the fromhost hi queue (unused) */
+ desc.control = DESC_VALID | DESC_WRAP | DESC_LEN(1); /* VW L=1 */
+ desc.pointer = mod->free_page;
+ memcpy_toio(dst, &desc, sizeof(desc));
+ mod->free_page++;
+
+ /* fromhost low queue descriptors are in page 8 */
+ ican3_set_page(mod, QUEUE_FROMHOST_LOW);
+ dst = mod->dpm;
+
+ /* initialize only a single buffer in the fromhost low queue (unused) */
+ desc.control = DESC_VALID | DESC_WRAP | DESC_LEN(1); /* VW L=1 */
+ desc.pointer = mod->free_page;
+ memcpy_toio(dst, &desc, sizeof(desc));
+ mod->free_page++;
+
+ spin_unlock_irqrestore(&mod->lock, flags);
+}
+
+/*
+ * ICAN3 Fast Host Interface Setup
+ */
+
+static void __devinit ican3_init_fast_host_interface(struct ican3_dev *mod)
+{
+ struct ican3_fast_desc desc;
+ unsigned long flags;
+ unsigned int addr;
+ void __iomem *dst;
+ int i;
+
+ spin_lock_irqsave(&mod->lock, flags);
+
+ /* save the start recv page */
+ mod->fastrx_start = mod->free_page;
+ mod->fastrx_num = 0;
+ mod->fastrx_int = 0;
+
+ /* build a single fast tohost queue descriptor */
+ memset(&desc, 0, sizeof(desc));
+ desc.control = 0x00;
+ desc.command = 1;
+
+ /* build the tohost queue descriptor ring in memory */
+ addr = 0;
+ for (i = 0; i < ICAN3_RX_BUFFERS; i++) {
+
+ /* set the wrap bit on the last buffer */
+ if (i == ICAN3_RX_BUFFERS - 1)
+ desc.control |= DESC_WRAP;
+
+ /* switch to the correct page */
+ ican3_set_page(mod, mod->free_page);
+
+ /* copy the descriptor to the DPM */
+ dst = mod->dpm + addr;
+ memcpy_toio(dst, &desc, sizeof(desc));
+ addr += sizeof(desc);
+
+ /* move to the next page if necessary */
+ if (addr >= DPM_PAGE_SIZE) {
+ addr = 0;
+ mod->free_page++;
+ }
+ }
+
+ /* make sure we page-align the next queue */
+ if (addr != 0)
+ mod->free_page++;
+
+ /* save the start xmit page */
+ mod->fasttx_start = mod->free_page;
+ mod->fasttx_num = 0;
+
+ /* build a single fast fromhost queue descriptor */
+ memset(&desc, 0, sizeof(desc));
+ desc.control = DESC_VALID;
+ desc.command = 1;
+
+ /* build the fromhost queue descriptor ring in memory */
+ addr = 0;
+ for (i = 0; i < ICAN3_TX_BUFFERS; i++) {
+
+ /* set the wrap bit on the last buffer */
+ if (i == ICAN3_TX_BUFFERS - 1)
+ desc.control |= DESC_WRAP;
+
+ /* switch to the correct page */
+ ican3_set_page(mod, mod->free_page);
+
+ /* copy the descriptor to the DPM */
+ dst = mod->dpm + addr;
+ memcpy_toio(dst, &desc, sizeof(desc));
+ addr += sizeof(desc);
+
+ /* move to the next page if necessary */
+ if (addr >= DPM_PAGE_SIZE) {
+ addr = 0;
+ mod->free_page++;
+ }
+ }
+
+ spin_unlock_irqrestore(&mod->lock, flags);
+}
+
+/*
+ * ICAN3 "new-style" Host Interface Message Helpers
+ */
+
+/*
+ * LOCKING: must hold mod->lock
+ */
+static int ican3_new_send_msg(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+ struct ican3_new_desc desc;
+ void __iomem *desc_addr = mod->dpm + (mod->tx_num * sizeof(desc));
+
+ /* switch to the fromhost mid queue, and read the buffer descriptor */
+ ican3_set_page(mod, QUEUE_FROMHOST_MID);
+ memcpy_fromio(&desc, desc_addr, sizeof(desc));
+
+ if (!(desc.control & DESC_VALID)) {
+ dev_dbg(mod->dev, "%s: no free buffers\n", __func__);
+ return -ENOMEM;
+ }
+
+ /* switch to the data page, copy the data */
+ ican3_set_page(mod, desc.pointer);
+ memcpy_toio(mod->dpm, msg, sizeof(*msg));
+
+ /* switch back to the descriptor, set the valid bit, write it back */
+ ican3_set_page(mod, QUEUE_FROMHOST_MID);
+ desc.control ^= DESC_VALID;
+ memcpy_toio(desc_addr, &desc, sizeof(desc));
+
+ /* update the tx number */
+ mod->tx_num = (desc.control & DESC_WRAP) ? 0 : (mod->tx_num + 1);
+ return 0;
+}
+
+/*
+ * LOCKING: must hold mod->lock
+ */
+static int ican3_new_recv_msg(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+ struct ican3_new_desc desc;
+ void __iomem *desc_addr = mod->dpm + (mod->rx_num * sizeof(desc));
+
+ /* switch to the tohost queue, and read the buffer descriptor */
+ ican3_set_page(mod, QUEUE_TOHOST);
+ memcpy_fromio(&desc, desc_addr, sizeof(desc));
+
+ if (!(desc.control & DESC_VALID)) {
+ dev_dbg(mod->dev, "%s: no buffers to recv\n", __func__);
+ return -ENOMEM;
+ }
+
+ /* switch to the data page, copy the data */
+ ican3_set_page(mod, desc.pointer);
+ memcpy_fromio(msg, mod->dpm, sizeof(*msg));
+
+ /* switch back to the descriptor, toggle the valid bit, write it back */
+ ican3_set_page(mod, QUEUE_TOHOST);
+ desc.control ^= DESC_VALID;
+ memcpy_toio(desc_addr, &desc, sizeof(desc));
+
+ /* update the rx number */
+ mod->rx_num = (desc.control & DESC_WRAP) ? 0 : (mod->rx_num + 1);
+ return 0;
+}
+
+/*
+ * Message Send / Recv Helpers
+ */
+
+static int ican3_send_msg(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&mod->lock, flags);
+
+ if (mod->iftype == 0)
+ ret = ican3_old_send_msg(mod, msg);
+ else
+ ret = ican3_new_send_msg(mod, msg);
+
+ spin_unlock_irqrestore(&mod->lock, flags);
+ return ret;
+}
+
+static int ican3_recv_msg(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&mod->lock, flags);
+
+ if (mod->iftype == 0)
+ ret = ican3_old_recv_msg(mod, msg);
+ else
+ ret = ican3_new_recv_msg(mod, msg);
+
+ spin_unlock_irqrestore(&mod->lock, flags);
+ return ret;
+}
+
+/*
+ * Quick Pre-constructed Messages
+ */
+
+static int __devinit ican3_msg_connect(struct ican3_dev *mod)
+{
+ struct ican3_msg msg;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.spec = MSG_CONNECTI;
+ msg.len = cpu_to_le16(0);
+
+ return ican3_send_msg(mod, &msg);
+}
+
+static int __devexit ican3_msg_disconnect(struct ican3_dev *mod)
+{
+ struct ican3_msg msg;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.spec = MSG_DISCONNECT;
+ msg.len = cpu_to_le16(0);
+
+ return ican3_send_msg(mod, &msg);
+}
+
+static int __devinit ican3_msg_newhostif(struct ican3_dev *mod)
+{
+ struct ican3_msg msg;
+ int ret;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.spec = MSG_NEWHOSTIF;
+ msg.len = cpu_to_le16(0);
+
+ /* If we're not using the old interface, switching seems bogus */
+ WARN_ON(mod->iftype != 0);
+
+ ret = ican3_send_msg(mod, &msg);
+ if (ret)
+ return ret;
+
+ /* mark the module as using the new host interface */
+ mod->iftype = 1;
+ return 0;
+}
+
+static int __devinit ican3_msg_fasthostif(struct ican3_dev *mod)
+{
+ struct ican3_msg msg;
+ unsigned int addr;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.spec = MSG_INITFDPMQUEUE;
+ msg.len = cpu_to_le16(8);
+
+ /* write the tohost queue start address */
+ addr = DPM_PAGE_ADDR(mod->fastrx_start);
+ msg.data[0] = addr & 0xff;
+ msg.data[1] = (addr >> 8) & 0xff;
+ msg.data[2] = (addr >> 16) & 0xff;
+ msg.data[3] = (addr >> 24) & 0xff;
+
+ /* write the fromhost queue start address */
+ addr = DPM_PAGE_ADDR(mod->fasttx_start);
+ msg.data[4] = addr & 0xff;
+ msg.data[5] = (addr >> 8) & 0xff;
+ msg.data[6] = (addr >> 16) & 0xff;
+ msg.data[7] = (addr >> 24) & 0xff;
+
+ /* If we're not using the new interface yet, we cannot do this */
+ WARN_ON(mod->iftype != 1);
+
+ return ican3_send_msg(mod, &msg);
+}
+
+/*
+ * Setup the CAN filter to either accept or reject all
+ * messages from the CAN bus.
+ */
+static int __devinit ican3_set_id_filter(struct ican3_dev *mod, bool accept)
+{
+ struct ican3_msg msg;
+ int ret;
+
+ /* Standard Frame Format */
+ memset(&msg, 0, sizeof(msg));
+ msg.spec = MSG_SETAFILMASK;
+ msg.len = cpu_to_le16(5);
+ msg.data[0] = 0x00; /* IDLo LSB */
+ msg.data[1] = 0x00; /* IDLo MSB */
+ msg.data[2] = 0xff; /* IDHi LSB */
+ msg.data[3] = 0x07; /* IDHi MSB */
+
+ /* accept all frames for fast host if, or reject all frames */
+ msg.data[4] = accept ? SETAFILMASK_FASTIF : SETAFILMASK_REJECT;
+
+ ret = ican3_send_msg(mod, &msg);
+ if (ret)
+ return ret;
+
+ /* Extended Frame Format */
+ memset(&msg, 0, sizeof(msg));
+ msg.spec = MSG_SETAFILMASK;
+ msg.len = cpu_to_le16(13);
+ msg.data[0] = 0; /* MUX = 0 */
+ msg.data[1] = 0x00; /* IDLo LSB */
+ msg.data[2] = 0x00;
+ msg.data[3] = 0x00;
+ msg.data[4] = 0x20; /* IDLo MSB */
+ msg.data[5] = 0xff; /* IDHi LSB */
+ msg.data[6] = 0xff;
+ msg.data[7] = 0xff;
+ msg.data[8] = 0x3f; /* IDHi MSB */
+
+ /* accept all frames for fast host if, or reject all frames */
+ msg.data[9] = accept ? SETAFILMASK_FASTIF : SETAFILMASK_REJECT;
+
+ return ican3_send_msg(mod, &msg);
+}
+
+/*
+ * Bring the CAN bus online or offline
+ */
+static int ican3_set_bus_state(struct ican3_dev *mod, bool on)
+{
+ struct ican3_msg msg;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.spec = on ? MSG_CONREQ : MSG_COFFREQ;
+ msg.len = cpu_to_le16(0);
+
+ return ican3_send_msg(mod, &msg);
+}
+
+static int ican3_set_termination(struct ican3_dev *mod, bool on)
+{
+ struct ican3_msg msg;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.spec = MSG_HWCONF;
+ msg.len = cpu_to_le16(2);
+ msg.data[0] = 0x00;
+ msg.data[1] = on ? HWCONF_TERMINATE_ON : HWCONF_TERMINATE_OFF;
+
+ return ican3_send_msg(mod, &msg);
+}
+
+static int ican3_send_inquiry(struct ican3_dev *mod, u8 subspec)
+{
+ struct ican3_msg msg;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.spec = MSG_INQUIRY;
+ msg.len = cpu_to_le16(2);
+ msg.data[0] = subspec;
+ msg.data[1] = 0x00;
+
+ return ican3_send_msg(mod, &msg);
+}
+
+static int ican3_set_buserror(struct ican3_dev *mod, u8 quota)
+{
+ struct ican3_msg msg;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.spec = MSG_CCONFREQ;
+ msg.len = cpu_to_le16(2);
+ msg.data[0] = 0x00;
+ msg.data[1] = quota;
+
+ return ican3_send_msg(mod, &msg);
+}
+
+/*
+ * ICAN3 to Linux CAN Frame Conversion
+ */
+
+static void ican3_to_can_frame(struct ican3_dev *mod,
+ struct ican3_fast_desc *desc,
+ struct can_frame *cf)
+{
+ if ((desc->command & ICAN3_CAN_TYPE_MASK) == ICAN3_CAN_TYPE_SFF) {
+ if (desc->data[1] & ICAN3_SFF_RTR)
+ cf->can_id |= CAN_RTR_FLAG;
+
+ cf->can_id |= desc->data[0] << 3;
+ cf->can_id |= (desc->data[1] & 0xe0) >> 5;
+ cf->can_dlc = desc->data[1] & ICAN3_CAN_DLC_MASK;
+ memcpy(cf->data, &desc->data[2], sizeof(cf->data));
+ } else {
+ cf->can_dlc = desc->data[0] & ICAN3_CAN_DLC_MASK;
+ if (desc->data[0] & ICAN3_EFF_RTR)
+ cf->can_id |= CAN_RTR_FLAG;
+
+ if (desc->data[0] & ICAN3_EFF) {
+ cf->can_id |= CAN_EFF_FLAG;
+ cf->can_id |= desc->data[2] << 21; /* 28-21 */
+ cf->can_id |= desc->data[3] << 13; /* 20-13 */
+ cf->can_id |= desc->data[4] << 5; /* 12-5 */
+ cf->can_id |= (desc->data[5] & 0xf8) >> 3;
+ } else {
+ cf->can_id |= desc->data[2] << 3; /* 10-3 */
+ cf->can_id |= desc->data[3] >> 5; /* 2-0 */
+ }
+
+ memcpy(cf->data, &desc->data[6], sizeof(cf->data));
+ }
+}
+
+static void can_frame_to_ican3(struct ican3_dev *mod,
+ struct can_frame *cf,
+ struct ican3_fast_desc *desc)
+{
+ /* clear out any stale data in the descriptor */
+ memset(desc->data, 0, sizeof(desc->data));
+
+ /* we always use the extended format, with the ECHO flag set */
+ desc->command = ICAN3_CAN_TYPE_EFF;
+ desc->data[0] |= cf->can_dlc;
+ desc->data[1] |= ICAN3_ECHO;
+
+ if (cf->can_id & CAN_RTR_FLAG)
+ desc->data[0] |= ICAN3_EFF_RTR;
+
+ /* pack the id into the correct places */
+ if (cf->can_id & CAN_EFF_FLAG) {
+ desc->data[0] |= ICAN3_EFF;
+ desc->data[2] = (cf->can_id & 0x1fe00000) >> 21; /* 28-21 */
+ desc->data[3] = (cf->can_id & 0x001fe000) >> 13; /* 20-13 */
+ desc->data[4] = (cf->can_id & 0x00001fe0) >> 5; /* 12-5 */
+ desc->data[5] = (cf->can_id & 0x0000001f) << 3; /* 4-0 */
+ } else {
+ desc->data[2] = (cf->can_id & 0x7F8) >> 3; /* bits 10-3 */
+ desc->data[3] = (cf->can_id & 0x007) << 5; /* bits 2-0 */
+ }
+
+ /* copy the data bits into the descriptor */
+ memcpy(&desc->data[6], cf->data, sizeof(cf->data));
+}
+
+/*
+ * Interrupt Handling
+ */
+
+/*
+ * Handle an ID + Version message response from the firmware. We never generate
+ * this message in production code, but it is very useful when debugging to be
+ * able to display this message.
+ */
+static void ican3_handle_idvers(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+ dev_dbg(mod->dev, "IDVERS response: %s\n", msg->data);
+}
+
+static void ican3_handle_msglost(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+ struct net_device *dev = mod->ndev;
+ struct net_device_stats *stats = &dev->stats;
+ struct can_frame *cf;
+ struct sk_buff *skb;
+
+ /*
+ * Report that communication messages with the microcontroller firmware
+ * are being lost. These are never CAN frames, so we do not generate an
+ * error frame for userspace
+ */
+ if (msg->spec == MSG_MSGLOST) {
+ dev_err(mod->dev, "lost %d control messages\n", msg->data[0]);
+ return;
+ }
+
+ /*
+ * Oops, this indicates that we have lost messages in the fast queue,
+ * which are exclusively CAN messages. Our driver isn't reading CAN
+ * frames fast enough.
+ *
+ * We'll pretend that the SJA1000 told us that it ran out of buffer
+ * space, because there is not a better message for this.
+ */
+ skb = alloc_can_err_skb(dev, &cf);
+ if (skb) {
+ cf->can_id |= CAN_ERR_CRTL;
+ cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+ stats->rx_errors++;
+ stats->rx_bytes += cf->can_dlc;
+ netif_rx(skb);
+ }
+}
+
+/*
+ * Handle CAN Event Indication Messages from the firmware
+ *
+ * The ICAN3 firmware provides the values of some SJA1000 registers when it
+ * generates this message. The code below is largely copied from the
+ * drivers/net/can/sja1000/sja1000.c file, and adapted as necessary
+ */
+static int ican3_handle_cevtind(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+ struct net_device *dev = mod->ndev;
+ struct net_device_stats *stats = &dev->stats;
+ enum can_state state = mod->can.state;
+ u8 status, isrc, rxerr, txerr;
+ struct can_frame *cf;
+ struct sk_buff *skb;
+
+ /* we can only handle the SJA1000 part */
+ if (msg->data[1] != CEVTIND_CHIP_SJA1000) {
+ dev_err(mod->dev, "unable to handle errors on non-SJA1000\n");
+ return -ENODEV;
+ }
+
+ /* check the message length for sanity */
+ if (le16_to_cpu(msg->len) < 6) {
+ dev_err(mod->dev, "error message too short\n");
+ return -EINVAL;
+ }
+
+ skb = alloc_can_err_skb(dev, &cf);
+ if (skb == NULL)
+ return -ENOMEM;
+
+ isrc = msg->data[0];
+ status = msg->data[3];
+ rxerr = msg->data[4];
+ txerr = msg->data[5];
+
+ /* data overrun interrupt */
+ if (isrc == CEVTIND_DOI || isrc == CEVTIND_LOST) {
+ dev_dbg(mod->dev, "data overrun interrupt\n");
+ cf->can_id |= CAN_ERR_CRTL;
+ cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+ stats->rx_over_errors++;
+ stats->rx_errors++;
+ }
+
+ /* error warning + passive interrupt */
+ if (isrc == CEVTIND_EI) {
+ dev_dbg(mod->dev, "error warning + passive interrupt\n");
+ if (status & SR_BS) {
+ state = CAN_STATE_BUS_OFF;
+ cf->can_id |= CAN_ERR_BUSOFF;
+ can_bus_off(dev);
+ } else if (status & SR_ES) {
+ if (rxerr >= 128 || txerr >= 128)
+ state = CAN_STATE_ERROR_PASSIVE;
+ else
+ state = CAN_STATE_ERROR_WARNING;
+ } else {
+ state = CAN_STATE_ERROR_ACTIVE;
+ }
+ }
+
+ /* bus error interrupt */
+ if (isrc == CEVTIND_BEI) {
+ u8 ecc = msg->data[2];
+
+ dev_dbg(mod->dev, "bus error interrupt\n");
+ mod->can.can_stats.bus_error++;
+ stats->rx_errors++;
+ cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+
+ switch (ecc & ECC_MASK) {
+ case ECC_BIT:
+ cf->data[2] |= CAN_ERR_PROT_BIT;
+ break;
+ case ECC_FORM:
+ cf->data[2] |= CAN_ERR_PROT_FORM;
+ break;
+ case ECC_STUFF:
+ cf->data[2] |= CAN_ERR_PROT_STUFF;
+ break;
+ default:
+ cf->data[2] |= CAN_ERR_PROT_UNSPEC;
+ cf->data[3] = ecc & ECC_SEG;
+ break;
+ }
+
+ if ((ecc & ECC_DIR) == 0)
+ cf->data[2] |= CAN_ERR_PROT_TX;
+
+ cf->data[6] = txerr;
+ cf->data[7] = rxerr;
+ }
+
+ if (state != mod->can.state && (state == CAN_STATE_ERROR_WARNING ||
+ state == CAN_STATE_ERROR_PASSIVE)) {
+ cf->can_id |= CAN_ERR_CRTL;
+ if (state == CAN_STATE_ERROR_WARNING) {
+ mod->can.can_stats.error_warning++;
+ cf->data[1] = (txerr > rxerr) ?
+ CAN_ERR_CRTL_TX_WARNING :
+ CAN_ERR_CRTL_RX_WARNING;
+ } else {
+ mod->can.can_stats.error_passive++;
+ cf->data[1] = (txerr > rxerr) ?
+ CAN_ERR_CRTL_TX_PASSIVE :
+ CAN_ERR_CRTL_RX_PASSIVE;
+ }
+
+ cf->data[6] = txerr;
+ cf->data[7] = rxerr;
+ }
+
+ mod->can.state = state;
+ stats->rx_errors++;
+ stats->rx_bytes += cf->can_dlc;
+ netif_rx(skb);
+ return 0;
+}
+
+static void ican3_handle_inquiry(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+ switch (msg->data[0]) {
+ case INQUIRY_STATUS:
+ case INQUIRY_EXTENDED:
+ mod->bec.rxerr = msg->data[5];
+ mod->bec.txerr = msg->data[6];
+ complete(&mod->buserror_comp);
+ break;
+ case INQUIRY_TERMINATION:
+ mod->termination_enabled = msg->data[6] & HWCONF_TERMINATE_ON;
+ complete(&mod->termination_comp);
+ break;
+ default:
+ dev_err(mod->dev, "recieved an unknown inquiry response\n");
+ break;
+ }
+}
+
+static void ican3_handle_unknown_message(struct ican3_dev *mod,
+ struct ican3_msg *msg)
+{
+ dev_warn(mod->dev, "recieved unknown message: spec 0x%.2x length %d\n",
+ msg->spec, le16_to_cpu(msg->len));
+}
+
+/*
+ * Handle a control message from the firmware
+ */
+static void ican3_handle_message(struct ican3_dev *mod, struct ican3_msg *msg)
+{
+ dev_dbg(mod->dev, "%s: modno %d spec 0x%.2x len %d bytes\n", __func__,
+ mod->num, msg->spec, le16_to_cpu(msg->len));
+
+ switch (msg->spec) {
+ case MSG_IDVERS:
+ ican3_handle_idvers(mod, msg);
+ break;
+ case MSG_MSGLOST:
+ case MSG_FMSGLOST:
+ ican3_handle_msglost(mod, msg);
+ break;
+ case MSG_CEVTIND:
+ ican3_handle_cevtind(mod, msg);
+ break;
+ case MSG_INQUIRY:
+ ican3_handle_inquiry(mod, msg);
+ break;
+ default:
+ ican3_handle_unknown_message(mod, msg);
+ break;
+ }
+}
+
+/*
+ * Check that there is room in the TX ring to transmit another skb
+ *
+ * LOCKING: must hold mod->lock
+ */
+static bool ican3_txok(struct ican3_dev *mod)
+{
+ struct ican3_fast_desc __iomem *desc;
+ u8 control;
+
+ /* copy the control bits of the descriptor */
+ ican3_set_page(mod, mod->fasttx_start + (mod->fasttx_num / 16));
+ desc = mod->dpm + ((mod->fasttx_num % 16) * sizeof(*desc));
+ control = ioread8(&desc->control);
+
+ /* if the control bits are not valid, then we have no more space */
+ if (!(control & DESC_VALID))
+ return false;
+
+ return true;
+}
+
+/*
+ * Recieve one CAN frame from the hardware
+ *
+ * This works like the core of a NAPI function, but is intended to be called
+ * from workqueue context instead. This driver already needs a workqueue to
+ * process control messages, so we use the workqueue instead of using NAPI.
+ * This was done to simplify locking.
+ *
+ * CONTEXT: must be called from user context
+ */
+static int ican3_recv_skb(struct ican3_dev *mod)
+{
+ struct net_device *ndev = mod->ndev;
+ struct net_device_stats *stats = &ndev->stats;
+ struct ican3_fast_desc desc;
+ void __iomem *desc_addr;
+ struct can_frame *cf;
+ struct sk_buff *skb;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mod->lock, flags);
+
+ /* copy the whole descriptor */
+ ican3_set_page(mod, mod->fastrx_start + (mod->fastrx_num / 16));
+ desc_addr = mod->dpm + ((mod->fastrx_num % 16) * sizeof(desc));
+ memcpy_fromio(&desc, desc_addr, sizeof(desc));
+
+ spin_unlock_irqrestore(&mod->lock, flags);
+
+ /* check that we actually have a CAN frame */
+ if (!(desc.control & DESC_VALID))
+ return -ENOBUFS;
+
+ /* allocate an skb */
+ skb = alloc_can_skb(ndev, &cf);
+ if (unlikely(skb == NULL)) {
+ stats->rx_dropped++;
+ goto err_noalloc;
+ }
+
+ /* convert the ICAN3 frame into Linux CAN format */
+ ican3_to_can_frame(mod, &desc, cf);
+
+ /* receive the skb, update statistics */
+ netif_receive_skb(skb);
+ stats->rx_packets++;
+ stats->rx_bytes += cf->can_dlc;
+
+err_noalloc:
+ /* toggle the valid bit and return the descriptor to the ring */
+ desc.control ^= DESC_VALID;
+
+ spin_lock_irqsave(&mod->lock, flags);
+
+ ican3_set_page(mod, mod->fastrx_start + (mod->fastrx_num / 16));
+ memcpy_toio(desc_addr, &desc, 1);
+
+ /* update the next buffer pointer */
+ mod->fastrx_num = (desc.control & DESC_WRAP) ? 0
+ : (mod->fastrx_num + 1);
+
+ /* there are still more buffers to process */
+ spin_unlock_irqrestore(&mod->lock, flags);
+ return 0;
+}
+
+static int ican3_napi(struct napi_struct *napi, int budget)
+{
+ struct ican3_dev *mod = container_of(napi, struct ican3_dev, napi);
+ struct ican3_msg msg;
+ unsigned long flags;
+ int received = 0;
+ int ret;
+
+ /* process all communication messages */
+ while (true) {
+ ret = ican3_recv_msg(mod, &msg);
+ if (ret)
+ break;
+
+ ican3_handle_message(mod, &msg);
+ }
+
+ /* process all CAN frames from the fast interface */
+ while (received < budget) {
+ ret = ican3_recv_skb(mod);
+ if (ret)
+ break;
+
+ received++;
+ }
+
+ /* We have processed all packets that the adapter had, but it
+ * was less than our budget, stop polling */
+ if (received < budget)
+ napi_complete(napi);
+
+ spin_lock_irqsave(&mod->lock, flags);
+
+ /* Wake up the transmit queue if necessary */
+ if (netif_queue_stopped(mod->ndev) && ican3_txok(mod))
+ netif_wake_queue(mod->ndev);
+
+ spin_unlock_irqrestore(&mod->lock, flags);
+
+ /* re-enable interrupt generation */
+ iowrite8(1 << mod->num, &mod->ctrl->int_enable);
+ return received;
+}
+
+static irqreturn_t ican3_irq(int irq, void *dev_id)
+{
+ struct ican3_dev *mod = dev_id;
+ u8 stat;
+
+ /*
+ * The interrupt status register on this device reports interrupts
+ * as zeroes instead of using ones like most other devices
+ */
+ stat = ioread8(&mod->ctrl->int_disable) & (1 << mod->num);
+ if (stat == (1 << mod->num))
+ return IRQ_NONE;
+
+ /* clear the MODULbus interrupt from the microcontroller */
+ ioread8(&mod->dpmctrl->interrupt);
+
+ /* disable interrupt generation, schedule the NAPI poller */
+ iowrite8(1 << mod->num, &mod->ctrl->int_disable);
+ napi_schedule(&mod->napi);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Firmware reset, startup, and shutdown
+ */
+
+/*
+ * Reset an ICAN module to its power-on state
+ *
+ * CONTEXT: no network device registered
+ * LOCKING: work function disabled
+ */
+static int ican3_reset_module(struct ican3_dev *mod)
+{
+ u8 val = 1 << mod->num;
+ unsigned long start;
+ u8 runold, runnew;
+
+ /* disable interrupts so no more work is scheduled */
+ iowrite8(1 << mod->num, &mod->ctrl->int_disable);
+
+ /* flush any pending work */
+ flush_scheduled_work();
+
+ /* the first unallocated page in the DPM is #9 */
+ mod->free_page = DPM_FREE_START;
+
+ ican3_set_page(mod, QUEUE_OLD_CONTROL);
+ runold = ioread8(mod->dpm + TARGET_RUNNING);
+
+ /* reset the module */
+ iowrite8(val, &mod->ctrl->reset_assert);
+ iowrite8(val, &mod->ctrl->reset_deassert);
+
+ /* wait until the module has finished resetting and is running */
+ start = jiffies;
+ do {
+ ican3_set_page(mod, QUEUE_OLD_CONTROL);
+ runnew = ioread8(mod->dpm + TARGET_RUNNING);
+ if (runnew == (runold ^ 0xff))
+ return 0;
+
+ msleep(10);
+ } while (time_before(jiffies, start + HZ / 4));
+
+ dev_err(mod->dev, "failed to reset CAN module\n");
+ return -ETIMEDOUT;
+}
+
+static void __devexit ican3_shutdown_module(struct ican3_dev *mod)
+{
+ ican3_msg_disconnect(mod);
+ ican3_reset_module(mod);
+}
+
+/*
+ * Startup an ICAN module, bringing it into fast mode
+ */
+static int __devinit ican3_startup_module(struct ican3_dev *mod)
+{
+ int ret;
+
+ ret = ican3_reset_module(mod);
+ if (ret) {
+ dev_err(mod->dev, "unable to reset module\n");
+ return ret;
+ }
+
+ /* re-enable interrupts so we can send messages */
+ iowrite8(1 << mod->num, &mod->ctrl->int_enable);
+
+ ret = ican3_msg_connect(mod);
+ if (ret) {
+ dev_err(mod->dev, "unable to connect to module\n");
+ return ret;
+ }
+
+ ican3_init_new_host_interface(mod);
+ ret = ican3_msg_newhostif(mod);
+ if (ret) {
+ dev_err(mod->dev, "unable to switch to new-style interface\n");
+ return ret;
+ }
+
+ /* default to "termination on" */
+ ret = ican3_set_termination(mod, true);
+ if (ret) {
+ dev_err(mod->dev, "unable to enable termination\n");
+ return ret;
+ }
+
+ /* default to "bus errors enabled" */
+ ret = ican3_set_buserror(mod, ICAN3_BUSERR_QUOTA_MAX);
+ if (ret) {
+ dev_err(mod->dev, "unable to set bus-error\n");
+ return ret;
+ }
+
+ ican3_init_fast_host_interface(mod);
+ ret = ican3_msg_fasthostif(mod);
+ if (ret) {
+ dev_err(mod->dev, "unable to switch to fast host interface\n");
+ return ret;
+ }
+
+ ret = ican3_set_id_filter(mod, true);
+ if (ret) {
+ dev_err(mod->dev, "unable to set acceptance filter\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * CAN Network Device
+ */
+
+static int ican3_open(struct net_device *ndev)
+{
+ struct ican3_dev *mod = netdev_priv(ndev);
+ u8 quota;
+ int ret;
+
+ /* open the CAN layer */
+ ret = open_candev(ndev);
+ if (ret) {
+ dev_err(mod->dev, "unable to start CAN layer\n");
+ return ret;
+ }
+
+ /* set the bus error generation state appropriately */
+ if (mod->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
+ quota = ICAN3_BUSERR_QUOTA_MAX;
+ else
+ quota = 0;
+
+ ret = ican3_set_buserror(mod, quota);
+ if (ret) {
+ dev_err(mod->dev, "unable to set bus-error\n");
+ close_candev(ndev);
+ return ret;
+ }
+
+ /* bring the bus online */
+ ret = ican3_set_bus_state(mod, true);
+ if (ret) {
+ dev_err(mod->dev, "unable to set bus-on\n");
+ close_candev(ndev);
+ return ret;
+ }
+
+ /* start up the network device */
+ mod->can.state = CAN_STATE_ERROR_ACTIVE;
+ netif_start_queue(ndev);
+
+ return 0;
+}
+
+static int ican3_stop(struct net_device *ndev)
+{
+ struct ican3_dev *mod = netdev_priv(ndev);
+ int ret;
+
+ /* stop the network device xmit routine */
+ netif_stop_queue(ndev);
+ mod->can.state = CAN_STATE_STOPPED;
+
+ /* bring the bus offline, stop receiving packets */
+ ret = ican3_set_bus_state(mod, false);
+ if (ret) {
+ dev_err(mod->dev, "unable to set bus-off\n");
+ return ret;
+ }
+
+ /* close the CAN layer */
+ close_candev(ndev);
+ return 0;
+}
+
+static int ican3_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct ican3_dev *mod = netdev_priv(ndev);
+ struct net_device_stats *stats = &ndev->stats;
+ struct can_frame *cf = (struct can_frame *)skb->data;
+ struct ican3_fast_desc desc;
+ void __iomem *desc_addr;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mod->lock, flags);
+
+ /* check that we can actually transmit */
+ if (!ican3_txok(mod)) {
+ dev_err(mod->dev, "no free descriptors, stopping queue\n");
+ netif_stop_queue(ndev);
+ spin_unlock_irqrestore(&mod->lock, flags);
+ return NETDEV_TX_BUSY;
+ }
+
+ /* copy the control bits of the descriptor */
+ ican3_set_page(mod, mod->fasttx_start + (mod->fasttx_num / 16));
+ desc_addr = mod->dpm + ((mod->fasttx_num % 16) * sizeof(desc));
+ memset(&desc, 0, sizeof(desc));
+ memcpy_fromio(&desc, desc_addr, 1);
+
+ /* convert the Linux CAN frame into ICAN3 format */
+ can_frame_to_ican3(mod, cf, &desc);
+
+ /*
+ * the programming manual says that you must set the IVALID bit, then
+ * interrupt, then set the valid bit. Quite weird, but it seems to be
+ * required for this to work
+ */
+ desc.control |= DESC_IVALID;
+ memcpy_toio(desc_addr, &desc, sizeof(desc));
+
+ /* generate a MODULbus interrupt to the microcontroller */
+ iowrite8(0x01, &mod->dpmctrl->interrupt);
+
+ desc.control ^= DESC_VALID;
+ memcpy_toio(desc_addr, &desc, sizeof(desc));
+
+ /* update the next buffer pointer */
+ mod->fasttx_num = (desc.control & DESC_WRAP) ? 0
+ : (mod->fasttx_num + 1);
+
+ /* update statistics */
+ stats->tx_packets++;
+ stats->tx_bytes += cf->can_dlc;
+ kfree_skb(skb);
+
+ /*
+ * This hardware doesn't have TX-done notifications, so we'll try and
+ * emulate it the best we can using ECHO skbs. Get the next TX
+ * descriptor, and see if we have room to send. If not, stop the queue.
+ * It will be woken when the ECHO skb for the current packet is recv'd.
+ */
+
+ /* copy the control bits of the descriptor */
+ if (!ican3_txok(mod))
+ netif_stop_queue(ndev);
+
+ spin_unlock_irqrestore(&mod->lock, flags);
+ return NETDEV_TX_OK;
+}
+
+static const struct net_device_ops ican3_netdev_ops = {
+ .ndo_open = ican3_open,
+ .ndo_stop = ican3_stop,
+ .ndo_start_xmit = ican3_xmit,
+};
+
+/*
+ * Low-level CAN Device
+ */
+
+/* This structure was stolen from drivers/net/can/sja1000/sja1000.c */
+static struct can_bittiming_const ican3_bittiming_const = {
+ .name = DRV_NAME,
+ .tseg1_min = 1,
+ .tseg1_max = 16,
+ .tseg2_min = 1,
+ .tseg2_max = 8,
+ .sjw_max = 4,
+ .brp_min = 1,
+ .brp_max = 64,
+ .brp_inc = 1,
+};
+
+/*
+ * This routine was stolen from drivers/net/can/sja1000/sja1000.c
+ *
+ * The bittiming register command for the ICAN3 just sets the bit timing
+ * registers on the SJA1000 chip directly
+ */
+static int ican3_set_bittiming(struct net_device *ndev)
+{
+ struct ican3_dev *mod = netdev_priv(ndev);
+ struct can_bittiming *bt = &mod->can.bittiming;
+ struct ican3_msg msg;
+ u8 btr0, btr1;
+
+ btr0 = ((bt->brp - 1) & 0x3f) | (((bt->sjw - 1) & 0x3) << 6);
+ btr1 = ((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) |
+ (((bt->phase_seg2 - 1) & 0x7) << 4);
+ if (mod->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
+ btr1 |= 0x80;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.spec = MSG_CBTRREQ;
+ msg.len = cpu_to_le16(4);
+ msg.data[0] = 0x00;
+ msg.data[1] = 0x00;
+ msg.data[2] = btr0;
+ msg.data[3] = btr1;
+
+ return ican3_send_msg(mod, &msg);
+}
+
+static int ican3_set_mode(struct net_device *ndev, enum can_mode mode)
+{
+ struct ican3_dev *mod = netdev_priv(ndev);
+ int ret;
+
+ if (mode != CAN_MODE_START)
+ return -ENOTSUPP;
+
+ /* bring the bus online */
+ ret = ican3_set_bus_state(mod, true);
+ if (ret) {
+ dev_err(mod->dev, "unable to set bus-on\n");
+ return ret;
+ }
+
+ /* start up the network device */
+ mod->can.state = CAN_STATE_ERROR_ACTIVE;
+
+ if (netif_queue_stopped(ndev))
+ netif_wake_queue(ndev);
+
+ return 0;
+}
+
+static int ican3_get_berr_counter(const struct net_device *ndev,
+ struct can_berr_counter *bec)
+{
+ struct ican3_dev *mod = netdev_priv(ndev);
+ int ret;
+
+ ret = ican3_send_inquiry(mod, INQUIRY_STATUS);
+ if (ret)
+ return ret;
+
+ ret = wait_for_completion_timeout(&mod->buserror_comp, HZ);
+ if (ret <= 0) {
+ dev_info(mod->dev, "%s timed out\n", __func__);
+ return -ETIMEDOUT;
+ }
+
+ bec->rxerr = mod->bec.rxerr;
+ bec->txerr = mod->bec.txerr;
+ return 0;
+}
+
+/*
+ * Sysfs Attributes
+ */
+
+static ssize_t ican3_sysfs_show_term(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ican3_dev *mod = netdev_priv(to_net_dev(dev));
+ int ret;
+
+ ret = ican3_send_inquiry(mod, INQUIRY_TERMINATION);
+ if (ret)
+ return ret;
+
+ ret = wait_for_completion_timeout(&mod->termination_comp, HZ);
+ if (ret <= 0) {
+ dev_info(mod->dev, "%s timed out\n", __func__);
+ return -ETIMEDOUT;
+ }
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", mod->termination_enabled);
+}
+
+static ssize_t ican3_sysfs_set_term(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ican3_dev *mod = netdev_priv(to_net_dev(dev));
+ unsigned long enable;
+ int ret;
+
+ if (strict_strtoul(buf, 0, &enable))
+ return -EINVAL;
+
+ ret = ican3_set_termination(mod, enable);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR(termination, S_IWUGO | S_IRUGO, ican3_sysfs_show_term,
+ ican3_sysfs_set_term);
+
+static struct attribute *ican3_sysfs_attrs[] = {
+ &dev_attr_termination.attr,
+ NULL,
+};
+
+static struct attribute_group ican3_sysfs_attr_group = {
+ .attrs = ican3_sysfs_attrs,
+};
+
+/*
+ * PCI Subsystem
+ */
+
+static int __devinit ican3_probe(struct platform_device *pdev)
+{
+ struct janz_platform_data *pdata;
+ struct net_device *ndev;
+ struct ican3_dev *mod;
+ struct resource *res;
+ struct device *dev;
+ int ret;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata)
+ return -ENXIO;
+
+ dev_dbg(&pdev->dev, "probe: module number %d\n", pdata->modno);
+
+ /* save the struct device for printing */
+ dev = &pdev->dev;
+
+ /* allocate the CAN device and private data */
+ ndev = alloc_candev(sizeof(*mod), 0);
+ if (!ndev) {
+ dev_err(dev, "unable to allocate CANdev\n");
+ ret = -ENOMEM;
+ goto out_return;
+ }
+
+ platform_set_drvdata(pdev, ndev);
+ mod = netdev_priv(ndev);
+ mod->ndev = ndev;
+ mod->dev = &pdev->dev;
+ mod->num = pdata->modno;
+ netif_napi_add(ndev, &mod->napi, ican3_napi, ICAN3_RX_BUFFERS);
+ spin_lock_init(&mod->lock);
+ init_completion(&mod->termination_comp);
+ init_completion(&mod->buserror_comp);
+
+ /* setup device-specific sysfs attributes */
+ ndev->sysfs_groups[0] = &ican3_sysfs_attr_group;
+
+ /* the first unallocated page in the DPM is 9 */
+ mod->free_page = DPM_FREE_START;
+
+ ndev->netdev_ops = &ican3_netdev_ops;
+ ndev->flags |= IFF_ECHO;
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+
+ mod->can.clock.freq = ICAN3_CAN_CLOCK;
+ mod->can.bittiming_const = &ican3_bittiming_const;
+ mod->can.do_set_bittiming = ican3_set_bittiming;
+ mod->can.do_set_mode = ican3_set_mode;
+ mod->can.do_get_berr_counter = ican3_get_berr_counter;
+ mod->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES
+ | CAN_CTRLMODE_BERR_REPORTING;
+
+ /* find our IRQ number */
+ mod->irq = platform_get_irq(pdev, 0);
+ if (mod->irq < 0) {
+ dev_err(dev, "IRQ line not found\n");
+ ret = -ENODEV;
+ goto out_free_ndev;
+ }
+
+ ndev->irq = mod->irq;
+
+ /* get access to the MODULbus registers for this module */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "MODULbus registers not found\n");
+ ret = -ENODEV;
+ goto out_free_ndev;
+ }
+
+ mod->dpm = ioremap(res->start, resource_size(res));
+ if (!mod->dpm) {
+ dev_err(dev, "MODULbus registers not ioremap\n");
+ ret = -ENOMEM;
+ goto out_free_ndev;
+ }
+
+ mod->dpmctrl = mod->dpm + DPM_PAGE_SIZE;
+
+ /* get access to the control registers for this module */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res) {
+ dev_err(dev, "CONTROL registers not found\n");
+ ret = -ENODEV;
+ goto out_iounmap_dpm;
+ }
+
+ mod->ctrl = ioremap(res->start, resource_size(res));
+ if (!mod->ctrl) {
+ dev_err(dev, "CONTROL registers not ioremap\n");
+ ret = -ENOMEM;
+ goto out_iounmap_dpm;
+ }
+
+ /* disable our IRQ, then hookup the IRQ handler */
+ iowrite8(1 << mod->num, &mod->ctrl->int_disable);
+ ret = request_irq(mod->irq, ican3_irq, IRQF_SHARED, DRV_NAME, mod);
+ if (ret) {
+ dev_err(dev, "unable to request IRQ\n");
+ goto out_iounmap_ctrl;
+ }
+
+ /* reset and initialize the CAN controller into fast mode */
+ napi_enable(&mod->napi);
+ ret = ican3_startup_module(mod);
+ if (ret) {
+ dev_err(dev, "%s: unable to start CANdev\n", __func__);
+ goto out_free_irq;
+ }
+
+ /* register with the Linux CAN layer */
+ ret = register_candev(ndev);
+ if (ret) {
+ dev_err(dev, "%s: unable to register CANdev\n", __func__);
+ goto out_free_irq;
+ }
+
+ dev_info(dev, "module %d: registered CAN device\n", pdata->modno);
+ return 0;
+
+out_free_irq:
+ napi_disable(&mod->napi);
+ iowrite8(1 << mod->num, &mod->ctrl->int_disable);
+ free_irq(mod->irq, mod);
+out_iounmap_ctrl:
+ iounmap(mod->ctrl);
+out_iounmap_dpm:
+ iounmap(mod->dpm);
+out_free_ndev:
+ free_candev(ndev);
+out_return:
+ return ret;
+}
+
+static int __devexit ican3_remove(struct platform_device *pdev)
+{
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct ican3_dev *mod = netdev_priv(ndev);
+
+ /* unregister the netdevice, stop interrupts */
+ unregister_netdev(ndev);
+ napi_disable(&mod->napi);
+ iowrite8(1 << mod->num, &mod->ctrl->int_disable);
+ free_irq(mod->irq, mod);
+
+ /* put the module into reset */
+ ican3_shutdown_module(mod);
+
+ /* unmap all registers */
+ iounmap(mod->ctrl);
+ iounmap(mod->dpm);
+
+ free_candev(ndev);
+
+ return 0;
+}
+
+static struct platform_driver ican3_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = ican3_probe,
+ .remove = __devexit_p(ican3_remove),
+};
+
+static int __init ican3_init(void)
+{
+ return platform_driver_register(&ican3_driver);
+}
+
+static void __exit ican3_exit(void)
+{
+ platform_driver_unregister(&ican3_driver);
+}
+
+MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
+MODULE_DESCRIPTION("Janz MODULbus VMOD-ICAN3 Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:janz-ican3");
+
+module_init(ican3_init);
+module_exit(ican3_exit);
diff --git a/drivers/net/can/mscan/mpc5xxx_can.c b/drivers/net/can/mscan/mpc5xxx_can.c
index 8af8442..af75393 100644
--- a/drivers/net/can/mscan/mpc5xxx_can.c
+++ b/drivers/net/can/mscan/mpc5xxx_can.c
@@ -73,7 +73,7 @@
else
*mscan_clksrc = MSCAN_CLKSRC_XTAL;
- freq = mpc5xxx_get_bus_frequency(ofdev->node);
+ freq = mpc5xxx_get_bus_frequency(ofdev->dev.of_node);
if (!freq)
return 0;
@@ -152,7 +152,7 @@
}
/* Determine the MSCAN device index from the physical address */
- pval = of_get_property(ofdev->node, "reg", &plen);
+ pval = of_get_property(ofdev->dev.of_node, "reg", &plen);
BUG_ON(!pval || plen < sizeof(*pval));
clockidx = (*pval & 0x80) ? 1 : 0;
if (*pval & 0x2000)
@@ -168,11 +168,11 @@
*/
if (clock_name && !strcmp(clock_name, "ip")) {
*mscan_clksrc = MSCAN_CLKSRC_IPS;
- freq = mpc5xxx_get_bus_frequency(ofdev->node);
+ freq = mpc5xxx_get_bus_frequency(ofdev->dev.of_node);
} else {
*mscan_clksrc = MSCAN_CLKSRC_BUS;
- pval = of_get_property(ofdev->node,
+ pval = of_get_property(ofdev->dev.of_node,
"fsl,mscan-clock-divider", &plen);
if (pval && plen == sizeof(*pval))
clockdiv = *pval;
@@ -251,7 +251,7 @@
const struct of_device_id *id)
{
struct mpc5xxx_can_data *data = (struct mpc5xxx_can_data *)id->data;
- struct device_node *np = ofdev->node;
+ struct device_node *np = ofdev->dev.of_node;
struct net_device *dev;
struct mscan_priv *priv;
void __iomem *base;
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index be90d35..8047126 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -3367,13 +3367,9 @@
static void cnic_init_context(struct cnic_dev *dev, u32 cid)
{
- struct cnic_local *cp = dev->cnic_priv;
u32 cid_addr;
int i;
- if (CHIP_NUM(cp) == CHIP_NUM_5709)
- return;
-
cid_addr = GET_CID_ADDR(cid);
for (i = 0; i < CTX_SIZE; i += 4)
@@ -3530,14 +3526,11 @@
sb_id = cp->status_blk_num;
tx_cid = 20;
- cnic_init_context(dev, tx_cid);
- cnic_init_context(dev, tx_cid + 1);
cp->tx_cons_ptr = &s_blk->status_tx_quick_consumer_index2;
if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
struct status_block_msix *sblk = cp->status_blk.bnx2;
tx_cid = TX_TSS_CID + sb_id - 1;
- cnic_init_context(dev, tx_cid);
CNIC_WR(dev, BNX2_TSCH_TSS_CFG, (sb_id << 24) |
(TX_TSS_CID << 7));
cp->tx_cons_ptr = &sblk->status_tx_quick_consumer_index;
@@ -3556,6 +3549,9 @@
offset2 = BNX2_L2CTX_TBDR_BHADDR_HI_XI;
offset3 = BNX2_L2CTX_TBDR_BHADDR_LO_XI;
} else {
+ cnic_init_context(dev, tx_cid);
+ cnic_init_context(dev, tx_cid + 1);
+
offset0 = BNX2_L2CTX_TYPE;
offset1 = BNX2_L2CTX_CMD_TYPE;
offset2 = BNX2_L2CTX_TBDR_BHADDR_HI;
@@ -3923,8 +3919,9 @@
HC_INDEX_DEF_C_ETH_ISCSI_CQ_CONS;
context->cstorm_st_context.status_block_id = BNX2X_DEF_SB_ID;
- context->xstorm_st_context.statistics_data = (cli |
- XSTORM_ETH_ST_CONTEXT_STATISTICS_ENABLE);
+ if (cli < MAX_X_STAT_COUNTER_ID)
+ context->xstorm_st_context.statistics_data = cli |
+ XSTORM_ETH_ST_CONTEXT_STATISTICS_ENABLE;
context->xstorm_ag_context.cdu_reserved =
CDU_RSRVD_VALUE_TYPE_A(BNX2X_HW_CID(BNX2X_ISCSI_L2_CID, func),
@@ -3932,10 +3929,12 @@
ETH_CONNECTION_TYPE);
/* reset xstorm per client statistics */
- val = BAR_XSTRORM_INTMEM +
- XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
- for (i = 0; i < sizeof(struct xstorm_per_client_stats) / 4; i++)
- CNIC_WR(dev, val + i * 4, 0);
+ if (cli < MAX_X_STAT_COUNTER_ID) {
+ val = BAR_XSTRORM_INTMEM +
+ XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
+ for (i = 0; i < sizeof(struct xstorm_per_client_stats) / 4; i++)
+ CNIC_WR(dev, val + i * 4, 0);
+ }
cp->tx_cons_ptr =
&cp->bnx2x_def_status_blk->c_def_status_block.index_values[
@@ -3982,9 +3981,11 @@
BNX2X_ISCSI_RX_SB_INDEX_NUM;
context->ustorm_st_context.common.clientId = cli;
context->ustorm_st_context.common.status_block_id = BNX2X_DEF_SB_ID;
- context->ustorm_st_context.common.flags =
- USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS;
- context->ustorm_st_context.common.statistics_counter_id = cli;
+ if (cli < MAX_U_STAT_COUNTER_ID) {
+ context->ustorm_st_context.common.flags =
+ USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS;
+ context->ustorm_st_context.common.statistics_counter_id = cli;
+ }
context->ustorm_st_context.common.mc_alignment_log_size = 0;
context->ustorm_st_context.common.bd_buff_size =
cp->l2_single_buf_size;
@@ -4015,10 +4016,13 @@
/* client tstorm info */
tstorm_client.mtu = cp->l2_single_buf_size - 14;
- tstorm_client.config_flags =
- (TSTORM_ETH_CLIENT_CONFIG_E1HOV_REM_ENABLE |
- TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE);
- tstorm_client.statistics_counter_id = cli;
+ tstorm_client.config_flags = TSTORM_ETH_CLIENT_CONFIG_E1HOV_REM_ENABLE;
+
+ if (cli < MAX_T_STAT_COUNTER_ID) {
+ tstorm_client.config_flags |=
+ TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE;
+ tstorm_client.statistics_counter_id = cli;
+ }
CNIC_WR(dev, BAR_TSTRORM_INTMEM +
TSTORM_CLIENT_CONFIG_OFFSET(port, cli),
@@ -4028,16 +4032,21 @@
((u32 *)&tstorm_client)[1]);
/* reset tstorm per client statistics */
- val = BAR_TSTRORM_INTMEM +
- TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
- for (i = 0; i < sizeof(struct tstorm_per_client_stats) / 4; i++)
- CNIC_WR(dev, val + i * 4, 0);
+ if (cli < MAX_T_STAT_COUNTER_ID) {
+
+ val = BAR_TSTRORM_INTMEM +
+ TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
+ for (i = 0; i < sizeof(struct tstorm_per_client_stats) / 4; i++)
+ CNIC_WR(dev, val + i * 4, 0);
+ }
/* reset ustorm per client statistics */
- val = BAR_USTRORM_INTMEM +
- USTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
- for (i = 0; i < sizeof(struct ustorm_per_client_stats) / 4; i++)
- CNIC_WR(dev, val + i * 4, 0);
+ if (cli < MAX_U_STAT_COUNTER_ID) {
+ val = BAR_USTRORM_INTMEM +
+ USTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
+ for (i = 0; i < sizeof(struct ustorm_per_client_stats) / 4; i++)
+ CNIC_WR(dev, val + i * 4, 0);
+ }
cp->rx_cons_ptr =
&cp->bnx2x_def_status_blk->u_def_status_block.index_values[
diff --git a/drivers/net/cnic_if.h b/drivers/net/cnic_if.h
index 110c620..0c55177 100644
--- a/drivers/net/cnic_if.h
+++ b/drivers/net/cnic_if.h
@@ -12,8 +12,8 @@
#ifndef CNIC_IF_H
#define CNIC_IF_H
-#define CNIC_MODULE_VERSION "2.1.1"
-#define CNIC_MODULE_RELDATE "Feb 22, 2010"
+#define CNIC_MODULE_VERSION "2.1.2"
+#define CNIC_MODULE_RELDATE "May 26, 2010"
#define CNIC_ULP_RDMA 0
#define CNIC_ULP_ISCSI 1
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 3c58db5..23786ee 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -1181,7 +1181,8 @@
if (netif_msg_drv(priv))
printk(KERN_ERR "%s: Could not attach to PHY\n",
dev->name);
- return PTR_ERR(priv->phy);
+ rc = PTR_ERR(priv->phy);
+ goto fail;
}
if ((rc = register_netdev(dev))) {
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index ebdea08..68a8089 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -1047,15 +1047,14 @@
goto err_register;
/* print bus type/speed/width info */
- e_info("(PCI%s:%s:%s) ",
- ((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""),
- ((hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
- (hw->bus_speed == e1000_bus_speed_120) ? "120MHz" :
- (hw->bus_speed == e1000_bus_speed_100) ? "100MHz" :
- (hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"),
- ((hw->bus_width == e1000_bus_width_64) ? "64-bit" : "32-bit"));
-
- e_info("%pM\n", netdev->dev_addr);
+ e_info("(PCI%s:%dMHz:%d-bit) %pM\n",
+ ((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""),
+ ((hw->bus_speed == e1000_bus_speed_133) ? 133 :
+ (hw->bus_speed == e1000_bus_speed_120) ? 120 :
+ (hw->bus_speed == e1000_bus_speed_100) ? 100 :
+ (hw->bus_speed == e1000_bus_speed_66) ? 66 : 33),
+ ((hw->bus_width == e1000_bus_width_64) ? 64 : 32),
+ netdev->dev_addr);
/* carrier off reporting is important to ethtool even BEFORE open */
netif_carrier_off(netdev);
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 24507f3..57a7e41 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -2554,7 +2554,7 @@
mdef = er32(MDEF(i));
/* Ignore filters with anything other than IPMI ports */
- if (mdef & !(E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
+ if (mdef & ~(E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
continue;
/* Enable this decision filter in MANC2H */
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 0630980..0060e42 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -40,7 +40,7 @@
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0103"
+#define DRV_VERSION "EHEA_0105"
/* eHEA capability flags */
#define DLPAR_PORT_ADD_REM 1
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index f547894..8b92acb 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -867,6 +867,7 @@
ehea_reset_cq_ep(pr->send_cq);
ehea_reset_cq_n1(pr->recv_cq);
ehea_reset_cq_n1(pr->send_cq);
+ rmb();
cqe = ehea_poll_rq1(pr->qp, &wqe_index);
cqe_skb = ehea_poll_cq(pr->send_cq);
@@ -2859,6 +2860,7 @@
container_of(work, struct ehea_port, reset_task);
struct net_device *dev = port->netdev;
+ mutex_lock(&dlpar_mem_lock);
port->resets++;
mutex_lock(&port->port_lock);
netif_stop_queue(dev);
@@ -2881,6 +2883,7 @@
netif_wake_queue(dev);
out:
mutex_unlock(&port->port_lock);
+ mutex_unlock(&dlpar_mem_lock);
}
static void ehea_rereg_mrs(struct work_struct *work)
@@ -3542,10 +3545,7 @@
int ret = NOTIFY_BAD;
struct memory_notify *arg = data;
- if (!mutex_trylock(&dlpar_mem_lock)) {
- ehea_info("ehea_mem_notifier must not be called parallelized");
- goto out;
- }
+ mutex_lock(&dlpar_mem_lock);
switch (action) {
case MEM_CANCEL_OFFLINE:
@@ -3574,7 +3574,6 @@
out_unlock:
mutex_unlock(&dlpar_mem_lock);
-out:
return ret;
}
diff --git a/drivers/net/enic/enic.h b/drivers/net/enic/enic.h
index 85f2a2e..45e86d1 100644
--- a/drivers/net/enic/enic.h
+++ b/drivers/net/enic/enic.h
@@ -74,7 +74,14 @@
void *devid;
};
+#define ENIC_SET_APPLIED (1 << 0)
+#define ENIC_SET_REQUEST (1 << 1)
+#define ENIC_SET_NAME (1 << 2)
+#define ENIC_SET_INSTANCE (1 << 3)
+#define ENIC_SET_HOST (1 << 4)
+
struct enic_port_profile {
+ u32 set;
u8 request;
char name[PORT_PROFILE_MAX];
u8 instance_uuid[PORT_UUID_MAX];
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index 6586b5c..bc7d6b9 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -1029,8 +1029,7 @@
return err;
}
-static int enic_set_port_profile(struct enic *enic, u8 request, u8 *mac,
- char *name, u8 *instance_uuid, u8 *host_uuid)
+static int enic_set_port_profile(struct enic *enic, u8 *mac)
{
struct vic_provinfo *vp;
u8 oui[3] = VIC_PROVINFO_CISCO_OUI;
@@ -1040,97 +1039,112 @@
"%02X%02X-%02X%02X%02X%02X%0X%02X";
int err;
- if (!name)
- return -EINVAL;
-
- if (!is_valid_ether_addr(mac))
- return -EADDRNOTAVAIL;
-
- vp = vic_provinfo_alloc(GFP_KERNEL, oui, VIC_PROVINFO_LINUX_TYPE);
- if (!vp)
- return -ENOMEM;
-
- vic_provinfo_add_tlv(vp,
- VIC_LINUX_PROV_TLV_PORT_PROFILE_NAME_STR,
- strlen(name) + 1, name);
-
- vic_provinfo_add_tlv(vp,
- VIC_LINUX_PROV_TLV_CLIENT_MAC_ADDR,
- ETH_ALEN, mac);
-
- if (instance_uuid) {
- uuid = instance_uuid;
- sprintf(uuid_str, uuid_fmt,
- uuid[0], uuid[1], uuid[2], uuid[3],
- uuid[4], uuid[5], uuid[6], uuid[7],
- uuid[8], uuid[9], uuid[10], uuid[11],
- uuid[12], uuid[13], uuid[14], uuid[15]);
- vic_provinfo_add_tlv(vp,
- VIC_LINUX_PROV_TLV_CLIENT_UUID_STR,
- sizeof(uuid_str), uuid_str);
- }
-
- if (host_uuid) {
- uuid = host_uuid;
- sprintf(uuid_str, uuid_fmt,
- uuid[0], uuid[1], uuid[2], uuid[3],
- uuid[4], uuid[5], uuid[6], uuid[7],
- uuid[8], uuid[9], uuid[10], uuid[11],
- uuid[12], uuid[13], uuid[14], uuid[15]);
- vic_provinfo_add_tlv(vp,
- VIC_LINUX_PROV_TLV_HOST_UUID_STR,
- sizeof(uuid_str), uuid_str);
- }
-
err = enic_vnic_dev_deinit(enic);
if (err)
- goto err_out;
+ return err;
- memset(&enic->pp, 0, sizeof(enic->pp));
+ switch (enic->pp.request) {
- err = enic_dev_init_prov(enic, vp);
- if (err)
- goto err_out;
+ case PORT_REQUEST_ASSOCIATE:
- enic->pp.request = request;
- memcpy(enic->pp.name, name, PORT_PROFILE_MAX);
- if (instance_uuid)
- memcpy(enic->pp.instance_uuid,
- instance_uuid, PORT_UUID_MAX);
- if (host_uuid)
- memcpy(enic->pp.host_uuid,
- host_uuid, PORT_UUID_MAX);
+ if (!(enic->pp.set & ENIC_SET_NAME) || !strlen(enic->pp.name))
+ return -EINVAL;
-err_out:
- vic_provinfo_free(vp);
+ if (!is_valid_ether_addr(mac))
+ return -EADDRNOTAVAIL;
- return err;
-}
+ vp = vic_provinfo_alloc(GFP_KERNEL, oui,
+ VIC_PROVINFO_LINUX_TYPE);
+ if (!vp)
+ return -ENOMEM;
-static int enic_unset_port_profile(struct enic *enic)
-{
- memset(&enic->pp, 0, sizeof(enic->pp));
- return enic_vnic_dev_deinit(enic);
+ vic_provinfo_add_tlv(vp,
+ VIC_LINUX_PROV_TLV_PORT_PROFILE_NAME_STR,
+ strlen(enic->pp.name) + 1, enic->pp.name);
+
+ vic_provinfo_add_tlv(vp,
+ VIC_LINUX_PROV_TLV_CLIENT_MAC_ADDR,
+ ETH_ALEN, mac);
+
+ if (enic->pp.set & ENIC_SET_INSTANCE) {
+ uuid = enic->pp.instance_uuid;
+ sprintf(uuid_str, uuid_fmt,
+ uuid[0], uuid[1], uuid[2], uuid[3],
+ uuid[4], uuid[5], uuid[6], uuid[7],
+ uuid[8], uuid[9], uuid[10], uuid[11],
+ uuid[12], uuid[13], uuid[14], uuid[15]);
+ vic_provinfo_add_tlv(vp,
+ VIC_LINUX_PROV_TLV_CLIENT_UUID_STR,
+ sizeof(uuid_str), uuid_str);
+ }
+
+ if (enic->pp.set & ENIC_SET_HOST) {
+ uuid = enic->pp.host_uuid;
+ sprintf(uuid_str, uuid_fmt,
+ uuid[0], uuid[1], uuid[2], uuid[3],
+ uuid[4], uuid[5], uuid[6], uuid[7],
+ uuid[8], uuid[9], uuid[10], uuid[11],
+ uuid[12], uuid[13], uuid[14], uuid[15]);
+ vic_provinfo_add_tlv(vp,
+ VIC_LINUX_PROV_TLV_HOST_UUID_STR,
+ sizeof(uuid_str), uuid_str);
+ }
+
+ err = enic_dev_init_prov(enic, vp);
+ vic_provinfo_free(vp);
+ if (err)
+ return err;
+ break;
+
+ case PORT_REQUEST_DISASSOCIATE:
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ enic->pp.set |= ENIC_SET_APPLIED;
+ return 0;
}
static int enic_set_vf_port(struct net_device *netdev, int vf,
struct nlattr *port[])
{
struct enic *enic = netdev_priv(netdev);
- char *name = NULL;
- u8 *instance_uuid = NULL;
- u8 *host_uuid = NULL;
- u8 request = PORT_REQUEST_DISASSOCIATE;
+
+ memset(&enic->pp, 0, sizeof(enic->pp));
+
+ if (port[IFLA_PORT_REQUEST]) {
+ enic->pp.set |= ENIC_SET_REQUEST;
+ enic->pp.request = nla_get_u8(port[IFLA_PORT_REQUEST]);
+ }
+
+ if (port[IFLA_PORT_PROFILE]) {
+ enic->pp.set |= ENIC_SET_NAME;
+ memcpy(enic->pp.name, nla_data(port[IFLA_PORT_PROFILE]),
+ PORT_PROFILE_MAX);
+ }
+
+ if (port[IFLA_PORT_INSTANCE_UUID]) {
+ enic->pp.set |= ENIC_SET_INSTANCE;
+ memcpy(enic->pp.instance_uuid,
+ nla_data(port[IFLA_PORT_INSTANCE_UUID]), PORT_UUID_MAX);
+ }
+
+ if (port[IFLA_PORT_HOST_UUID]) {
+ enic->pp.set |= ENIC_SET_HOST;
+ memcpy(enic->pp.host_uuid,
+ nla_data(port[IFLA_PORT_HOST_UUID]), PORT_UUID_MAX);
+ }
/* don't support VFs, yet */
if (vf != PORT_SELF_VF)
return -EOPNOTSUPP;
- if (port[IFLA_PORT_REQUEST])
- request = nla_get_u8(port[IFLA_PORT_REQUEST]);
+ if (!(enic->pp.set & ENIC_SET_REQUEST))
+ return -EOPNOTSUPP;
- switch (request) {
- case PORT_REQUEST_ASSOCIATE:
+ if (enic->pp.request == PORT_REQUEST_ASSOCIATE) {
/* If the interface mac addr hasn't been assigned,
* assign a random mac addr before setting port-
@@ -1139,30 +1153,9 @@
if (is_zero_ether_addr(netdev->dev_addr))
random_ether_addr(netdev->dev_addr);
-
- if (port[IFLA_PORT_PROFILE])
- name = nla_data(port[IFLA_PORT_PROFILE]);
-
- if (port[IFLA_PORT_INSTANCE_UUID])
- instance_uuid =
- nla_data(port[IFLA_PORT_INSTANCE_UUID]);
-
- if (port[IFLA_PORT_HOST_UUID])
- host_uuid = nla_data(port[IFLA_PORT_HOST_UUID]);
-
- return enic_set_port_profile(enic, request,
- netdev->dev_addr, name,
- instance_uuid, host_uuid);
-
- case PORT_REQUEST_DISASSOCIATE:
-
- return enic_unset_port_profile(enic);
-
- default:
- break;
}
- return -EOPNOTSUPP;
+ return enic_set_port_profile(enic, netdev->dev_addr);
}
static int enic_get_vf_port(struct net_device *netdev, int vf,
@@ -1172,14 +1165,12 @@
int err, error, done;
u16 response = PORT_PROFILE_RESPONSE_SUCCESS;
- /* don't support VFs, yet */
- if (vf != PORT_SELF_VF)
- return -EOPNOTSUPP;
+ if (!(enic->pp.set & ENIC_SET_APPLIED))
+ return -ENODATA;
err = enic_dev_init_done(enic, &done, &error);
-
if (err)
- return err;
+ error = err;
switch (error) {
case ERR_SUCCESS:
@@ -1202,12 +1193,15 @@
NLA_PUT_U16(skb, IFLA_PORT_REQUEST, enic->pp.request);
NLA_PUT_U16(skb, IFLA_PORT_RESPONSE, response);
- NLA_PUT(skb, IFLA_PORT_PROFILE, PORT_PROFILE_MAX,
- enic->pp.name);
- NLA_PUT(skb, IFLA_PORT_INSTANCE_UUID, PORT_UUID_MAX,
- enic->pp.instance_uuid);
- NLA_PUT(skb, IFLA_PORT_HOST_UUID, PORT_UUID_MAX,
- enic->pp.host_uuid);
+ if (enic->pp.set & ENIC_SET_NAME)
+ NLA_PUT(skb, IFLA_PORT_PROFILE, PORT_PROFILE_MAX,
+ enic->pp.name);
+ if (enic->pp.set & ENIC_SET_INSTANCE)
+ NLA_PUT(skb, IFLA_PORT_INSTANCE_UUID, PORT_UUID_MAX,
+ enic->pp.instance_uuid);
+ if (enic->pp.set & ENIC_SET_HOST)
+ NLA_PUT(skb, IFLA_PORT_HOST_UUID, PORT_UUID_MAX,
+ enic->pp.host_uuid);
return 0;
diff --git a/drivers/net/enic/vnic_dev.c b/drivers/net/enic/vnic_dev.c
index 2b3e16d..e0d3328 100644
--- a/drivers/net/enic/vnic_dev.c
+++ b/drivers/net/enic/vnic_dev.c
@@ -709,7 +709,7 @@
{
u64 a0, a1 = len;
int wait = 1000;
- u64 prov_pa;
+ dma_addr_t prov_pa;
void *prov_buf;
int ret;
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index 6838dfc..4c27465 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -87,6 +87,7 @@
#include <linux/bitops.h>
#include <asm/io.h>
#include <asm/uaccess.h>
+#include <asm/byteorder.h>
/* These identify the driver base version and may not be removed. */
static char version[] __devinitdata =
@@ -230,7 +231,7 @@
* The EPIC100 Rx and Tx buffer descriptors. Note that these
* really ARE host-endian; it's not a misannotation. We tell
* the card to byteswap them internally on big-endian hosts -
- * look for #ifdef CONFIG_BIG_ENDIAN in epic_open().
+ * look for #ifdef __BIG_ENDIAN in epic_open().
*/
struct epic_tx_desc {
@@ -690,7 +691,7 @@
outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
/* Tell the chip to byteswap descriptors on big-endian hosts */
-#ifdef CONFIG_BIG_ENDIAN
+#ifdef __BIG_ENDIAN
outl(0x4432 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
inl(ioaddr + GENCTL);
outl(0x0432 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
@@ -806,7 +807,7 @@
for (i = 16; i > 0; i--)
outl(0x0008, ioaddr + TEST1);
-#ifdef CONFIG_BIG_ENDIAN
+#ifdef __BIG_ENDIAN
outl(0x0432 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
#else
outl(0x0412 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 326465f..edfff92 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -681,6 +681,8 @@
struct phy_device *phy_dev = NULL;
int phy_addr;
+ fep->phy_dev = NULL;
+
/* find the first phy */
for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
if (fep->mii_bus->phy_map[phy_addr]) {
@@ -711,6 +713,11 @@
fep->link = 0;
fep->full_duplex = 0;
+ printk(KERN_INFO "%s: Freescale FEC PHY driver [%s] "
+ "(mii_bus:phy_addr=%s, irq=%d)\n", dev->name,
+ fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev),
+ fep->phy_dev->irq);
+
return 0;
}
@@ -756,13 +763,8 @@
if (mdiobus_register(fep->mii_bus))
goto err_out_free_mdio_irq;
- if (fec_enet_mii_probe(dev) != 0)
- goto err_out_unregister_bus;
-
return 0;
-err_out_unregister_bus:
- mdiobus_unregister(fep->mii_bus);
err_out_free_mdio_irq:
kfree(fep->mii_bus->irq);
err_out_free_mdiobus:
@@ -915,7 +917,12 @@
if (ret)
return ret;
- /* schedule a link state check */
+ /* Probe and connect to PHY when open the interface */
+ ret = fec_enet_mii_probe(dev);
+ if (ret) {
+ fec_enet_free_buffers(dev);
+ return ret;
+ }
phy_start(fep->phy_dev);
netif_start_queue(dev);
fep->opened = 1;
@@ -929,10 +936,12 @@
/* Don't know what to do yet. */
fep->opened = 0;
- phy_stop(fep->phy_dev);
netif_stop_queue(dev);
fec_stop(dev);
+ if (fep->phy_dev)
+ phy_disconnect(fep->phy_dev);
+
fec_enet_free_buffers(dev);
return 0;
@@ -1316,11 +1325,6 @@
if (ret)
goto failed_register;
- printk(KERN_INFO "%s: Freescale FEC PHY driver [%s] "
- "(mii_bus:phy_addr=%s, irq=%d)\n", ndev->name,
- fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev),
- fep->phy_dev->irq);
-
return 0;
failed_register:
@@ -1369,10 +1373,9 @@
if (ndev) {
fep = netdev_priv(ndev);
- if (netif_running(ndev)) {
- netif_device_detach(ndev);
- fec_stop(ndev);
- }
+ if (netif_running(ndev))
+ fec_enet_close(ndev);
+ clk_disable(fep->clk);
}
return 0;
}
@@ -1381,12 +1384,13 @@
fec_resume(struct platform_device *dev)
{
struct net_device *ndev = platform_get_drvdata(dev);
+ struct fec_enet_private *fep;
if (ndev) {
- if (netif_running(ndev)) {
- fec_enet_init(ndev, 0);
- netif_device_attach(ndev);
- }
+ fep = netdev_priv(ndev);
+ clk_enable(fep->clk);
+ if (netif_running(ndev))
+ fec_enet_open(ndev);
}
return 0;
}
diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c
index 5d45084..48e91b6 100644
--- a/drivers/net/fs_enet/mac-fcc.c
+++ b/drivers/net/fs_enet/mac-fcc.c
@@ -504,17 +504,54 @@
}
/* Some transmit errors cause the transmitter to shut
- * down. We now issue a restart transmit. Since the
- * errors close the BD and update the pointers, the restart
- * _should_ pick up without having to reset any of our
- * pointers either. Also, To workaround 8260 device erratum
- * CPM37, we must disable and then re-enable the transmitter
- * following a Late Collision, Underrun, or Retry Limit error.
+ * down. We now issue a restart transmit.
+ * Also, to workaround 8260 device erratum CPM37, we must
+ * disable and then re-enable the transmitterfollowing a
+ * Late Collision, Underrun, or Retry Limit error.
+ * In addition, tbptr may point beyond BDs beyond still marked
+ * as ready due to internal pipelining, so we need to look back
+ * through the BDs and adjust tbptr to point to the last BD
+ * marked as ready. This may result in some buffers being
+ * retransmitted.
*/
static void tx_restart(struct net_device *dev)
{
struct fs_enet_private *fep = netdev_priv(dev);
fcc_t __iomem *fccp = fep->fcc.fccp;
+ const struct fs_platform_info *fpi = fep->fpi;
+ fcc_enet_t __iomem *ep = fep->fcc.ep;
+ cbd_t __iomem *curr_tbptr;
+ cbd_t __iomem *recheck_bd;
+ cbd_t __iomem *prev_bd;
+ cbd_t __iomem *last_tx_bd;
+
+ last_tx_bd = fep->tx_bd_base + (fpi->tx_ring * sizeof(cbd_t));
+
+ /* get the current bd held in TBPTR and scan back from this point */
+ recheck_bd = curr_tbptr = (cbd_t __iomem *)
+ ((R32(ep, fen_genfcc.fcc_tbptr) - fep->ring_mem_addr) +
+ fep->ring_base);
+
+ prev_bd = (recheck_bd == fep->tx_bd_base) ? last_tx_bd : recheck_bd - 1;
+
+ /* Move through the bds in reverse, look for the earliest buffer
+ * that is not ready. Adjust TBPTR to the following buffer */
+ while ((CBDR_SC(prev_bd) & BD_ENET_TX_READY) != 0) {
+ /* Go back one buffer */
+ recheck_bd = prev_bd;
+
+ /* update the previous buffer */
+ prev_bd = (prev_bd == fep->tx_bd_base) ? last_tx_bd : prev_bd - 1;
+
+ /* We should never see all bds marked as ready, check anyway */
+ if (recheck_bd == curr_tbptr)
+ break;
+ }
+ /* Now update the TBPTR and dirty flag to the current buffer */
+ W32(ep, fen_genfcc.fcc_tbptr,
+ (uint) (((void *)recheck_bd - fep->ring_base) +
+ fep->ring_mem_addr));
+ fep->dirty_tx = recheck_bd;
C32(fccp, fcc_gfmr, FCC_GFMR_ENT);
udelay(10);
diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c
index 0f90685..3607340 100644
--- a/drivers/net/fs_enet/mii-bitbang.c
+++ b/drivers/net/fs_enet/mii-bitbang.c
@@ -169,7 +169,7 @@
new_bus->name = "CPM2 Bitbanged MII",
- ret = fs_mii_bitbang_init(new_bus, ofdev->node);
+ ret = fs_mii_bitbang_init(new_bus, ofdev->dev.of_node);
if (ret)
goto out_free_bus;
@@ -181,7 +181,7 @@
new_bus->parent = &ofdev->dev;
dev_set_drvdata(&ofdev->dev, new_bus);
- ret = of_mdiobus_register(new_bus, ofdev->node);
+ ret = of_mdiobus_register(new_bus, ofdev->dev.of_node);
if (ret)
goto out_free_irqs;
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 1830f31..28b53d1 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -381,10 +381,14 @@
/* Insert receive time stamps into padding alignment bytes */
if (priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER) {
rctrl &= ~RCTRL_PAL_MASK;
- rctrl |= RCTRL_PRSDEP_INIT | RCTRL_TS_ENABLE | RCTRL_PADDING(8);
+ rctrl |= RCTRL_PADDING(8);
priv->padding = 8;
}
+ /* Enable HW time stamping if requested from user space */
+ if (priv->hwts_rx_en)
+ rctrl |= RCTRL_PRSDEP_INIT | RCTRL_TS_ENABLE;
+
/* keep vlan related bits if it's enabled */
if (priv->vlgrp) {
rctrl |= RCTRL_VLEX | RCTRL_PRSDEP_INIT;
@@ -806,12 +810,20 @@
switch (config.rx_filter) {
case HWTSTAMP_FILTER_NONE:
- priv->hwts_rx_en = 0;
+ if (priv->hwts_rx_en) {
+ stop_gfar(netdev);
+ priv->hwts_rx_en = 0;
+ startup_gfar(netdev);
+ }
break;
default:
if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER))
return -ERANGE;
- priv->hwts_rx_en = 1;
+ if (!priv->hwts_rx_en) {
+ stop_gfar(netdev);
+ priv->hwts_rx_en = 1;
+ startup_gfar(netdev);
+ }
config.rx_filter = HWTSTAMP_FILTER_ALL;
break;
}
@@ -2643,6 +2655,10 @@
dma_unmap_single(&priv->ofdev->dev, bdp->bufPtr,
priv->rx_buffer_size, DMA_FROM_DEVICE);
+ if (unlikely(!(bdp->status & RXBD_ERR) &&
+ bdp->length > priv->rx_buffer_size))
+ bdp->status = RXBD_LARGE;
+
/* We drop the frame if we failed to allocate a new buffer */
if (unlikely(!newskb || !(bdp->status & RXBD_LAST) ||
bdp->status & RXBD_ERR)) {
diff --git a/drivers/net/greth.c b/drivers/net/greth.c
index f37a4c1..3a029d0 100644
--- a/drivers/net/greth.c
+++ b/drivers/net/greth.c
@@ -1607,14 +1607,13 @@
MODULE_DEVICE_TABLE(of, greth_of_match);
static struct of_platform_driver greth_of_driver = {
- .name = "grlib-greth",
- .match_table = greth_of_match,
+ .driver = {
+ .name = "grlib-greth",
+ .owner = THIS_MODULE,
+ .of_match_table = greth_of_match,
+ },
.probe = greth_of_probe,
.remove = __devexit_p(greth_of_remove),
- .driver = {
- .owner = THIS_MODULE,
- .name = "grlib-greth",
- },
};
static int __init greth_init(void)
diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c
index 694132e..4e7d1d0 100644
--- a/drivers/net/hamradio/yam.c
+++ b/drivers/net/hamradio/yam.c
@@ -1151,8 +1151,7 @@
dev = alloc_netdev(sizeof(struct yam_port), name,
yam_setup);
if (!dev) {
- printk(KERN_ERR "yam: cannot allocate net device %s\n",
- dev->name);
+ pr_err("yam: cannot allocate net device\n");
err = -ENOMEM;
goto error;
}
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index 7acb3ed..2602852 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -677,7 +677,7 @@
if (!adapter->pool_config)
netif_stop_queue(netdev);
- free_irq(netdev->irq, netdev);
+ h_vio_signal(adapter->vdev->unit_address, VIO_IRQ_DISABLE);
do {
lpar_rc = h_free_logical_lan(adapter->vdev->unit_address);
@@ -689,6 +689,8 @@
lpar_rc);
}
+ free_irq(netdev->irq, netdev);
+
adapter->rx_no_buffer = *(u64*)(((char*)adapter->buffer_list_addr) + 4096 - 8);
ibmveth_cleanup(adapter);
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 1159d91..9595b1b 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -1188,6 +1188,7 @@
IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
} else {
hw_dbg(hw, "RAR index %d is out of range.\n", index);
+ return IXGBE_ERR_RAR_INDEX;
}
return 0;
@@ -1219,6 +1220,7 @@
IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
} else {
hw_dbg(hw, "RAR index %d is out of range.\n", index);
+ return IXGBE_ERR_RAR_INDEX;
}
/* clear VMDq pool/queue selection for this RAR */
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index c50a754..3a93a81 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -2077,25 +2077,6 @@
return 0;
}
-/*
- * this function must be called before setting the new value of
- * rx_itr_setting
- */
-static bool ixgbe_reenable_rsc(struct ixgbe_adapter *adapter,
- struct ethtool_coalesce *ec)
-{
- /* check the old value and enable RSC if necessary */
- if ((adapter->rx_itr_setting == 0) &&
- (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)) {
- adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
- adapter->netdev->features |= NETIF_F_LRO;
- DPRINTK(PROBE, INFO, "rx-usecs set to %d, re-enabling RSC\n",
- ec->rx_coalesce_usecs);
- return true;
- }
- return false;
-}
-
static int ixgbe_set_coalesce(struct net_device *netdev,
struct ethtool_coalesce *ec)
{
@@ -2124,9 +2105,6 @@
(1000000/ec->rx_coalesce_usecs < IXGBE_MIN_INT_RATE))
return -EINVAL;
- /* check the old value and enable RSC if necessary */
- need_reset = ixgbe_reenable_rsc(adapter, ec);
-
/* store the value in ints/second */
adapter->rx_eitr_param = 1000000/ec->rx_coalesce_usecs;
@@ -2135,9 +2113,6 @@
/* clear the lower bit as its used for dynamic state */
adapter->rx_itr_setting &= ~1;
} else if (ec->rx_coalesce_usecs == 1) {
- /* check the old value and enable RSC if necessary */
- need_reset = ixgbe_reenable_rsc(adapter, ec);
-
/* 1 means dynamic mode */
adapter->rx_eitr_param = 20000;
adapter->rx_itr_setting = 1;
@@ -2157,10 +2132,11 @@
*/
if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED;
- netdev->features &= ~NETIF_F_LRO;
- DPRINTK(PROBE, INFO,
- "rx-usecs set to 0, disabling RSC\n");
-
+ if (netdev->features & NETIF_F_LRO) {
+ netdev->features &= ~NETIF_F_LRO;
+ DPRINTK(PROBE, INFO, "rx-usecs set to 0, "
+ "disabling LRO/RSC\n");
+ }
need_reset = true;
}
}
@@ -2255,6 +2231,9 @@
}
} else if (!adapter->rx_itr_setting) {
netdev->features &= ~ETH_FLAG_LRO;
+ if (data & ETH_FLAG_LRO)
+ DPRINTK(PROBE, INFO, "rx-usecs set to 0, "
+ "LRO/RSC cannot be enabled.\n");
}
}
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index d571d10..7b5d976 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -642,7 +642,7 @@
u32 txoff = IXGBE_TFCS_TXOFF;
#ifdef CONFIG_IXGBE_DCB
- if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+ if (adapter->dcb_cfg.pfc_mode_enable) {
int tc;
int reg_idx = tx_ring->reg_idx;
int dcb_i = adapter->ring_feature[RING_F_DCB].indices;
@@ -3684,10 +3684,6 @@
/* signal that we are down to the interrupt handler */
set_bit(__IXGBE_DOWN, &adapter->state);
- /* power down the optics */
- if (hw->phy.multispeed_fiber)
- hw->mac.ops.disable_tx_laser(hw);
-
/* disable receive for all VFs and wait one second */
if (adapter->num_vfs) {
/* ping all the active vfs to let them know we are going down */
@@ -3742,6 +3738,10 @@
(IXGBE_READ_REG(hw, IXGBE_DMATXCTL) &
~IXGBE_DMATXCTL_TE));
+ /* power down the optics */
+ if (hw->phy.multispeed_fiber)
+ hw->mac.ops.disable_tx_laser(hw);
+
/* clear n-tuple filters that are cached */
ethtool_ntuple_flush(netdev);
@@ -4001,7 +4001,7 @@
done:
/* Notify the stack of the (possibly) reduced Tx Queue count. */
- adapter->netdev->real_num_tx_queues = adapter->num_tx_queues;
+ netif_set_real_num_tx_queues(adapter->netdev, adapter->num_tx_queues);
}
static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
@@ -5195,7 +5195,6 @@
ixgbe_free_all_tx_resources(adapter);
ixgbe_free_all_rx_resources(adapter);
}
- ixgbe_clear_interrupt_scheme(adapter);
#ifdef CONFIG_PM
retval = pci_save_state(pdev);
@@ -5230,6 +5229,8 @@
*enable_wake = !!wufc;
+ ixgbe_clear_interrupt_scheme(adapter);
+
ixgbe_release_hw_control(adapter);
pci_disable_device(pdev);
@@ -5282,6 +5283,10 @@
u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot;
u64 non_eop_descs = 0, restart_queue = 0;
+ if (test_bit(__IXGBE_DOWN, &adapter->state) ||
+ test_bit(__IXGBE_RESETTING, &adapter->state))
+ return;
+
if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
u64 rsc_count = 0;
u64 rsc_flush = 0;
@@ -6019,7 +6024,6 @@
static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
int queue, u32 tx_flags)
{
- /* Right now, we support IPv4 only */
struct ixgbe_atr_input atr_input;
struct tcphdr *th;
struct iphdr *iph = ip_hdr(skb);
@@ -6028,6 +6032,9 @@
u32 src_ipv4_addr, dst_ipv4_addr;
u8 l4type = 0;
+ /* Right now, we support IPv4 only */
+ if (skb->protocol != htons(ETH_P_IP))
+ return;
/* check if we're UDP or TCP */
if (iph->protocol == IPPROTO_TCP) {
th = tcp_hdr(skb);
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 09e1911..48325a5 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -575,6 +575,8 @@
* 4 SFP_DA_CORE1 - 82599-specific
* 5 SFP_SR/LR_CORE0 - 82599-specific
* 6 SFP_SR/LR_CORE1 - 82599-specific
+ * 7 SFP_act_lmt_DA_CORE0 - 82599-specific
+ * 8 SFP_act_lmt_DA_CORE1 - 82599-specific
*/
if (hw->mac.type == ixgbe_mac_82598EB) {
if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 2eb6e15..cdd1998 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -2609,6 +2609,7 @@
#define IXGBE_ERR_EEPROM_VERSION -24
#define IXGBE_ERR_NO_SPACE -25
#define IXGBE_ERR_OVERTEMP -26
+#define IXGBE_ERR_RAR_INDEX -27
#define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF
#endif /* _IXGBE_TYPE_H_ */
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index 26bf1b7..c7a9bef 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -135,6 +135,7 @@
struct napi_struct napi;
struct timer_list media_check_timer;
struct mii_if_info mii_if;
+ struct work_struct restart_task;
struct net_device *dev;
int phy_addr;
};
@@ -375,7 +376,7 @@
if (devcs & ETH_RX_LE)
dev->stats.rx_length_errors++;
if (devcs & ETH_RX_OVR)
- dev->stats.rx_over_errors++;
+ dev->stats.rx_fifo_errors++;
if (devcs & ETH_RX_CV)
dev->stats.rx_frame_errors++;
if (devcs & ETH_RX_CES)
@@ -764,10 +765,9 @@
/* Initialize the receive descriptors */
for (i = 0; i < KORINA_NUM_RDS; i++) {
- skb = dev_alloc_skb(KORINA_RBSIZE + 2);
+ skb = netdev_alloc_skb_ip_align(dev, KORINA_RBSIZE);
if (!skb)
return -ENOMEM;
- skb_reserve(skb, 2);
lp->rx_skb[i] = skb;
lp->rd_ring[i].control = DMA_DESC_IOD |
DMA_COUNT(KORINA_RBSIZE);
@@ -890,12 +890,12 @@
/*
* Restart the RC32434 ethernet controller.
- * FIXME: check the return status where we call it
*/
-static int korina_restart(struct net_device *dev)
+static void korina_restart_task(struct work_struct *work)
{
- struct korina_private *lp = netdev_priv(dev);
- int ret;
+ struct korina_private *lp = container_of(work,
+ struct korina_private, restart_task);
+ struct net_device *dev = lp->dev;
/*
* Disable interrupts
@@ -916,10 +916,9 @@
napi_disable(&lp->napi);
- ret = korina_init(dev);
- if (ret < 0) {
+ if (korina_init(dev) < 0) {
printk(KERN_ERR "%s: cannot restart device\n", dev->name);
- return ret;
+ return;
}
korina_multicast_list(dev);
@@ -927,8 +926,6 @@
enable_irq(lp->ovr_irq);
enable_irq(lp->tx_irq);
enable_irq(lp->rx_irq);
-
- return ret;
}
static void korina_clear_and_restart(struct net_device *dev, u32 value)
@@ -937,7 +934,7 @@
netif_stop_queue(dev);
writel(value, &lp->eth_regs->ethintfc);
- korina_restart(dev);
+ schedule_work(&lp->restart_task);
}
/* Ethernet Tx Underflow interrupt */
@@ -962,11 +959,8 @@
static void korina_tx_timeout(struct net_device *dev)
{
struct korina_private *lp = netdev_priv(dev);
- unsigned long flags;
- spin_lock_irqsave(&lp->lock, flags);
- korina_restart(dev);
- spin_unlock_irqrestore(&lp->lock, flags);
+ schedule_work(&lp->restart_task);
}
/* Ethernet Rx Overflow interrupt */
@@ -1086,6 +1080,8 @@
napi_disable(&lp->napi);
+ cancel_work_sync(&lp->restart_task);
+
free_irq(lp->rx_irq, dev);
free_irq(lp->tx_irq, dev);
free_irq(lp->ovr_irq, dev);
@@ -1198,6 +1194,8 @@
}
setup_timer(&lp->media_check_timer, korina_poll_media, (unsigned long) dev);
+ INIT_WORK(&lp->restart_task, korina_restart_task);
+
printk(KERN_INFO "%s: " DRV_NAME "-" DRV_VERSION " " DRV_RELDATE "\n",
dev->name);
out:
diff --git a/drivers/net/ksz884x.c b/drivers/net/ksz884x.c
index c80ca64..7805bbf 100644
--- a/drivers/net/ksz884x.c
+++ b/drivers/net/ksz884x.c
@@ -4854,7 +4854,7 @@
*
* Return 0 if successful; otherwise an error code indicating failure.
*/
-static int netdev_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t netdev_tx(struct sk_buff *skb, struct net_device *dev)
{
struct dev_priv *priv = netdev_priv(dev);
struct dev_info *hw_priv = priv->adapter;
@@ -6863,6 +6863,7 @@
.ndo_tx_timeout = netdev_tx_timeout,
.ndo_change_mtu = netdev_change_mtu,
.ndo_set_mac_address = netdev_set_mac_address,
+ .ndo_validate_addr = eth_validate_addr,
.ndo_do_ioctl = netdev_ioctl,
.ndo_set_rx_mode = netdev_set_rx_mode,
#ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
index ce5d6e9..c27f429 100644
--- a/drivers/net/lib82596.c
+++ b/drivers/net/lib82596.c
@@ -1343,7 +1343,7 @@
DEB(DEB_MULTI,
printk(KERN_DEBUG
"%s: set multicast list, %d entries, promisc %s, allmulti %s\n",
- dev->name, dev->mc_count,
+ dev->name, netdev_mc_count(dev),
dev->flags & IFF_PROMISC ? "ON" : "OFF",
dev->flags & IFF_ALLMULTI ? "ON" : "OFF"));
diff --git a/drivers/net/ll_temac.h b/drivers/net/ll_temac.h
index c033584..522abe2 100644
--- a/drivers/net/ll_temac.h
+++ b/drivers/net/ll_temac.h
@@ -295,6 +295,10 @@
#define MULTICAST_CAM_TABLE_NUM 4
+/* TEMAC Synthesis features */
+#define TEMAC_FEATURE_RX_CSUM (1 << 0)
+#define TEMAC_FEATURE_TX_CSUM (1 << 1)
+
/* TX/RX CURDESC_PTR points to first descriptor */
/* TX/RX TAILDESC_PTR points to last descriptor in linked list */
@@ -353,6 +357,7 @@
struct mutex indirect_mutex;
u32 options; /* Current options word */
int last_link;
+ unsigned int temac_features;
/* Buffer descriptors */
struct cdmac_bd *tx_bd_v;
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index fa7620e..6474c49 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -245,7 +245,7 @@
CHNL_CTRL_IRQ_COAL_EN);
/* 0x10220483 */
/* 0x00100483 */
- lp->dma_out(lp, RX_CHNL_CTRL, 0xff010000 |
+ lp->dma_out(lp, RX_CHNL_CTRL, 0xff070000 |
CHNL_CTRL_IRQ_EN |
CHNL_CTRL_IRQ_DLY_EN |
CHNL_CTRL_IRQ_COAL_EN |
@@ -574,6 +574,10 @@
if (cur_p->app4)
dev_kfree_skb_irq((struct sk_buff *)cur_p->app4);
cur_p->app0 = 0;
+ cur_p->app1 = 0;
+ cur_p->app2 = 0;
+ cur_p->app3 = 0;
+ cur_p->app4 = 0;
ndev->stats.tx_packets++;
ndev->stats.tx_bytes += cur_p->len;
@@ -589,6 +593,29 @@
netif_wake_queue(ndev);
}
+static inline int temac_check_tx_bd_space(struct temac_local *lp, int num_frag)
+{
+ struct cdmac_bd *cur_p;
+ int tail;
+
+ tail = lp->tx_bd_tail;
+ cur_p = &lp->tx_bd_v[tail];
+
+ do {
+ if (cur_p->app0)
+ return NETDEV_TX_BUSY;
+
+ tail++;
+ if (tail >= TX_BD_NUM)
+ tail = 0;
+
+ cur_p = &lp->tx_bd_v[tail];
+ num_frag--;
+ } while (num_frag >= 0);
+
+ return 0;
+}
+
static int temac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
{
struct temac_local *lp = netdev_priv(ndev);
@@ -603,7 +630,7 @@
start_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
- if (cur_p->app0 & STS_CTRL_APP0_CMPLT) {
+ if (temac_check_tx_bd_space(lp, num_frag)) {
if (!netif_queue_stopped(ndev)) {
netif_stop_queue(ndev);
return NETDEV_TX_BUSY;
@@ -613,29 +640,14 @@
cur_p->app0 = 0;
if (skb->ip_summed == CHECKSUM_PARTIAL) {
- const struct iphdr *ip = ip_hdr(skb);
- int length = 0, start = 0, insert = 0;
+ unsigned int csum_start_off = skb_transport_offset(skb);
+ unsigned int csum_index_off = csum_start_off + skb->csum_offset;
- switch (ip->protocol) {
- case IPPROTO_TCP:
- start = sizeof(struct iphdr) + ETH_HLEN;
- insert = sizeof(struct iphdr) + ETH_HLEN + 16;
- length = ip->tot_len - sizeof(struct iphdr);
- break;
- case IPPROTO_UDP:
- start = sizeof(struct iphdr) + ETH_HLEN;
- insert = sizeof(struct iphdr) + ETH_HLEN + 6;
- length = ip->tot_len - sizeof(struct iphdr);
- break;
- default:
- break;
- }
- cur_p->app1 = ((start << 16) | insert);
- cur_p->app2 = csum_tcpudp_magic(ip->saddr, ip->daddr,
- length, ip->protocol, 0);
- skb->data[insert] = 0;
- skb->data[insert + 1] = 0;
+ cur_p->app0 |= 1; /* TX Checksum Enabled */
+ cur_p->app1 = (csum_start_off << 16) | csum_index_off;
+ cur_p->app2 = 0; /* initial checksum seed */
}
+
cur_p->app0 |= STS_CTRL_APP0_SOP;
cur_p->len = skb_headlen(skb);
cur_p->phys = dma_map_single(ndev->dev.parent, skb->data, skb->len,
@@ -699,6 +711,15 @@
skb->protocol = eth_type_trans(skb, ndev);
skb->ip_summed = CHECKSUM_NONE;
+ /* if we're doing rx csum offload, set it up */
+ if (((lp->temac_features & TEMAC_FEATURE_RX_CSUM) != 0) &&
+ (skb->protocol == __constant_htons(ETH_P_IP)) &&
+ (skb->len > 64)) {
+
+ skb->csum = cur_p->app3 & 0xFFFF;
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ }
+
netif_rx(skb);
ndev->stats.rx_packets++;
@@ -883,6 +904,7 @@
struct temac_local *lp;
struct net_device *ndev;
const void *addr;
+ __be32 *p;
int size, rc = 0;
/* Init network device structure */
@@ -926,11 +948,23 @@
goto nodev;
}
+ /* Setup checksum offload, but default to off if not specified */
+ lp->temac_features = 0;
+ p = (__be32 *)of_get_property(op->dev.of_node, "xlnx,txcsum", NULL);
+ if (p && be32_to_cpu(*p)) {
+ lp->temac_features |= TEMAC_FEATURE_TX_CSUM;
+ /* Can checksum TCP/UDP over IPv4. */
+ ndev->features |= NETIF_F_IP_CSUM;
+ }
+ p = (__be32 *)of_get_property(op->dev.of_node, "xlnx,rxcsum", NULL);
+ if (p && be32_to_cpu(*p))
+ lp->temac_features |= TEMAC_FEATURE_RX_CSUM;
+
/* Find the DMA node, map the DMA registers, and decode the DMA IRQs */
np = of_parse_phandle(op->dev.of_node, "llink-connected", 0);
if (!np) {
dev_err(&op->dev, "could not find DMA node\n");
- goto nodev;
+ goto err_iounmap;
}
/* Setup the DMA register accesses, could be DCR or memory mapped */
@@ -944,16 +978,16 @@
dev_dbg(&op->dev, "MEM base: %p\n", lp->sdma_regs);
} else {
dev_err(&op->dev, "unable to map DMA registers\n");
- goto nodev;
+ goto err_iounmap;
}
}
lp->rx_irq = irq_of_parse_and_map(np, 0);
lp->tx_irq = irq_of_parse_and_map(np, 1);
- if (!lp->rx_irq || !lp->tx_irq) {
+ if ((lp->rx_irq == NO_IRQ) || (lp->tx_irq == NO_IRQ)) {
dev_err(&op->dev, "could not determine irqs\n");
rc = -ENOMEM;
- goto nodev;
+ goto err_iounmap_2;
}
of_node_put(np); /* Finished with the DMA node; drop the reference */
@@ -963,7 +997,7 @@
if ((!addr) || (size != 6)) {
dev_err(&op->dev, "could not find MAC address\n");
rc = -ENODEV;
- goto nodev;
+ goto err_iounmap_2;
}
temac_set_mac_address(ndev, (void *)addr);
@@ -979,7 +1013,7 @@
rc = sysfs_create_group(&lp->dev->kobj, &temac_attr_group);
if (rc) {
dev_err(lp->dev, "Error creating sysfs files\n");
- goto nodev;
+ goto err_iounmap_2;
}
rc = register_netdev(lp->ndev);
@@ -992,6 +1026,11 @@
err_register_ndev:
sysfs_remove_group(&lp->dev->kobj, &temac_attr_group);
+ err_iounmap_2:
+ if (lp->sdma_regs)
+ iounmap(lp->sdma_regs);
+ err_iounmap:
+ iounmap(lp->regs);
nodev:
free_netdev(ndev);
ndev = NULL;
@@ -1010,6 +1049,9 @@
of_node_put(lp->phy_node);
lp->phy_node = NULL;
dev_set_drvdata(&op->dev, NULL);
+ iounmap(lp->regs);
+ if (lp->sdma_regs)
+ iounmap(lp->sdma_regs);
free_netdev(ndev);
return 0;
}
diff --git a/drivers/net/mace.c b/drivers/net/mace.c
index b6855a6..1c5221f 100644
--- a/drivers/net/mace.c
+++ b/drivers/net/mace.c
@@ -997,8 +997,11 @@
static struct macio_driver mace_driver =
{
- .name = "mace",
- .match_table = mace_match,
+ .driver = {
+ .name = "mace",
+ .owner = THIS_MODULE,
+ .of_match_table = mace_match,
+ },
.probe = mace_probe,
.remove = mace_remove,
};
diff --git a/drivers/net/mipsnet.c b/drivers/net/mipsnet.c
index 8e9704f..869f0ea 100644
--- a/drivers/net/mipsnet.c
+++ b/drivers/net/mipsnet.c
@@ -247,7 +247,7 @@
.ndo_set_mac_address = eth_mac_addr,
};
-static int __init mipsnet_probe(struct platform_device *dev)
+static int __devinit mipsnet_probe(struct platform_device *dev)
{
struct net_device *netdev;
int err;
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index e345ec8..73bb8ea 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -289,6 +289,7 @@
unsigned int t_clk;
int extended_rx_coal_limit;
int tx_bw_control;
+ int tx_csum_limit;
};
#define TX_BW_CONTROL_ABSENT 0
@@ -776,13 +777,16 @@
l4i_chk = 0;
if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ int hdr_len;
int tag_bytes;
BUG_ON(skb->protocol != htons(ETH_P_IP) &&
skb->protocol != htons(ETH_P_8021Q));
- tag_bytes = (void *)ip_hdr(skb) - (void *)skb->data - ETH_HLEN;
- if (unlikely(tag_bytes & ~12)) {
+ hdr_len = (void *)ip_hdr(skb) - (void *)skb->data;
+ tag_bytes = hdr_len - ETH_HLEN;
+ if (skb->len - hdr_len > mp->shared->tx_csum_limit ||
+ unlikely(tag_bytes & ~12)) {
if (skb_checksum_help(skb) == 0)
goto no_csum;
kfree_skb(skb);
@@ -2666,6 +2670,7 @@
* Detect hardware parameters.
*/
msp->t_clk = (pd != NULL && pd->t_clk != 0) ? pd->t_clk : 133000000;
+ msp->tx_csum_limit = pd->tx_csum_limit ? pd->tx_csum_limit : 9 * 1024;
infer_hw_params(msp);
platform_set_drvdata(pdev, msp);
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index b8e2923..1063093 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -806,8 +806,10 @@
dev->base_addr = res->start;
dev->irq = platform_get_irq(pdev, 0);
} else {
- if (this_dev < 0 || this_dev >= MAX_NE_CARDS)
+ if (this_dev < 0 || this_dev >= MAX_NE_CARDS) {
+ free_netdev(dev);
return -EINVAL;
+ }
dev->base_addr = io[this_dev];
dev->irq = irq[this_dev];
dev->mem_end = bad[this_dev];
diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/netxen/netxen_nic_ctx.c
index f26e547..3a41b6a 100644
--- a/drivers/net/netxen/netxen_nic_ctx.c
+++ b/drivers/net/netxen/netxen_nic_ctx.c
@@ -629,7 +629,8 @@
if (addr == NULL) {
dev_err(&pdev->dev, "%s: failed to allocate tx desc ring\n",
netdev->name);
- return -ENOMEM;
+ err = -ENOMEM;
+ goto err_out_free;
}
tx_ring->desc_head = (struct cmd_desc_type0 *)addr;
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 5c496f8..29d7b93 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -1159,9 +1159,6 @@
window = CRB_HI(off);
- if (adapter->ahw.crb_win == window)
- return;
-
writel(window, addr);
if (readl(addr) != window) {
if (printk_ratelimit())
@@ -1169,7 +1166,6 @@
"failed to set CRB window to %d off 0x%lx\n",
window, off);
}
- adapter->ahw.crb_win = window;
}
static void __iomem *
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 045a7c8..c865dda 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -218,7 +218,7 @@
if (cmd_buf_arr == NULL) {
dev_err(&pdev->dev, "%s: failed to allocate cmd buffer ring\n",
netdev->name);
- return -ENOMEM;
+ goto err_out;
}
memset(cmd_buf_arr, 0, TX_BUFF_RINGSIZE(tx_ring));
tx_ring->cmd_buf_arr = cmd_buf_arr;
@@ -230,7 +230,7 @@
if (rds_ring == NULL) {
dev_err(&pdev->dev, "%s: failed to allocate rds ring struct\n",
netdev->name);
- return -ENOMEM;
+ goto err_out;
}
recv_ctx->rds_rings = rds_ring;
@@ -1805,9 +1805,10 @@
netxen_ctx_msg msg = 0;
struct list_head *head;
+ spin_lock(&rds_ring->lock);
+
producer = rds_ring->producer;
- spin_lock(&rds_ring->lock);
head = &rds_ring->free_list;
while (!list_empty(head)) {
@@ -1829,7 +1830,6 @@
producer = get_next_index(producer, rds_ring->num_desc);
}
- spin_unlock(&rds_ring->lock);
if (count) {
rds_ring->producer = producer;
@@ -1853,6 +1853,8 @@
NETXEN_RCV_PRODUCER_OFFSET), msg);
}
}
+
+ spin_unlock(&rds_ring->lock);
}
static void
@@ -1864,10 +1866,11 @@
int producer, count = 0;
struct list_head *head;
- producer = rds_ring->producer;
if (!spin_trylock(&rds_ring->lock))
return;
+ producer = rds_ring->producer;
+
head = &rds_ring->free_list;
while (!list_empty(head)) {
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 5b3dfb4..33525bf 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -1168,6 +1168,7 @@
int interrupts, nr_serviced = 0, i;
struct ei_device *ei_local;
int handled = 0;
+ unsigned long flags;
e8390_base = dev->base_addr;
ei_local = netdev_priv(dev);
@@ -1176,7 +1177,7 @@
* Protect the irq test too.
*/
- spin_lock(&ei_local->page_lock);
+ spin_lock_irqsave(&ei_local->page_lock, flags);
if (ei_local->irqlock)
{
@@ -1188,7 +1189,7 @@
dev->name, inb_p(e8390_base + EN0_ISR),
inb_p(e8390_base + EN0_IMR));
#endif
- spin_unlock(&ei_local->page_lock);
+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
return IRQ_NONE;
}
@@ -1261,7 +1262,7 @@
ei_local->irqlock = 0;
outb_p(ENISR_ALL, e8390_base + EN0_IMR);
- spin_unlock(&ei_local->page_lock);
+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
return IRQ_RETVAL(handled);
}
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 6f77a76..bfdef72 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1727,6 +1727,7 @@
PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
+ PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "cis/DP83903.cis"),
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 7b6fe89..307cd17 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -322,6 +322,7 @@
return -ENOMEM;
smc = netdev_priv(dev);
smc->p_dev = link;
+ link->priv = dev;
spin_lock_init(&smc->lock);
link->io.NumPorts1 = 16;
@@ -1504,12 +1505,20 @@
writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_LAN + CISREG_COR);
writeb(cor, smc->base + MOT_LAN + CISREG_COR);
}
-#ifdef DOES_NOT_WORK
- if (smc->base != NULL) { /* Megahertz MFC's */
- readb(smc->base+MEGAHERTZ_ISR);
- readb(smc->base+MEGAHERTZ_ISR);
+
+ if ((smc->base != NULL) && /* Megahertz MFC's */
+ (smc->manfid == MANFID_MEGAHERTZ) &&
+ (smc->cardid == PRODID_MEGAHERTZ_EM3288)) {
+
+ u_char tmp;
+ tmp = readb(smc->base+MEGAHERTZ_ISR);
+ tmp = readb(smc->base+MEGAHERTZ_ISR);
+
+ /* Retrigger interrupt if needed */
+ writeb(tmp, smc->base + MEGAHERTZ_ISR);
+ writeb(tmp, smc->base + MEGAHERTZ_ISR);
}
-#endif
+
spin_unlock(&smc->lock);
return IRQ_RETVAL(handled);
}
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
index 8ee929b..29c39ff 100644
--- a/drivers/net/phy/lxt.c
+++ b/drivers/net/phy/lxt.c
@@ -53,6 +53,9 @@
#define MII_LXT971_ISR 19 /* Interrupt Status Register */
+/* register definitions for the 973 */
+#define MII_LXT973_PCR 16 /* Port Configuration Register */
+#define PCR_FIBER_SELECT 1
MODULE_DESCRIPTION("Intel LXT PHY driver");
MODULE_AUTHOR("Andy Fleming");
@@ -119,6 +122,33 @@
return err;
}
+static int lxt973_probe(struct phy_device *phydev)
+{
+ int val = phy_read(phydev, MII_LXT973_PCR);
+
+ if (val & PCR_FIBER_SELECT) {
+ /*
+ * If fiber is selected, then the only correct setting
+ * is 100Mbps, full duplex, and auto negotiation off.
+ */
+ val = phy_read(phydev, MII_BMCR);
+ val |= (BMCR_SPEED100 | BMCR_FULLDPLX);
+ val &= ~BMCR_ANENABLE;
+ phy_write(phydev, MII_BMCR, val);
+ /* Remember that the port is in fiber mode. */
+ phydev->priv = lxt973_probe;
+ } else {
+ phydev->priv = NULL;
+ }
+ return 0;
+}
+
+static int lxt973_config_aneg(struct phy_device *phydev)
+{
+ /* Do nothing if port is in fiber mode. */
+ return phydev->priv ? 0 : genphy_config_aneg(phydev);
+}
+
static struct phy_driver lxt970_driver = {
.phy_id = 0x78100000,
.name = "LXT970",
@@ -146,6 +176,18 @@
.driver = { .owner = THIS_MODULE,},
};
+static struct phy_driver lxt973_driver = {
+ .phy_id = 0x00137a10,
+ .name = "LXT973",
+ .phy_id_mask = 0xfffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .flags = 0,
+ .probe = lxt973_probe,
+ .config_aneg = lxt973_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = { .owner = THIS_MODULE,},
+};
+
static int __init lxt_init(void)
{
int ret;
@@ -157,9 +199,15 @@
ret = phy_driver_register(&lxt971_driver);
if (ret)
goto err2;
+
+ ret = phy_driver_register(&lxt973_driver);
+ if (ret)
+ goto err3;
return 0;
- err2:
+ err3:
+ phy_driver_unregister(&lxt971_driver);
+ err2:
phy_driver_unregister(&lxt970_driver);
err1:
return ret;
@@ -169,6 +217,7 @@
{
phy_driver_unregister(&lxt970_driver);
phy_driver_unregister(&lxt971_driver);
+ phy_driver_unregister(&lxt973_driver);
}
module_init(lxt_init);
@@ -177,6 +226,7 @@
static struct mdio_device_id lxt_tbl[] = {
{ 0x78100000, 0xfffffff0 },
{ 0x001378e0, 0xfffffff0 },
+ { 0x00137a10, 0xfffffff0 },
{ }
};
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index c5f8eb1..1b2c291 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -1422,7 +1422,7 @@
flen = len;
if (nfree > 0) {
if (pch->speed == 0) {
- flen = totlen/nfree;
+ flen = len/nfree;
if (nbigger > 0) {
flen++;
nbigger--;
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index fa4b24c..d10bcef 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -4611,8 +4611,7 @@
return;
}
- qdev->timer.expires = jiffies + (5*HZ);
- add_timer(&qdev->timer);
+ mod_timer(&qdev->timer, jiffies + (5*HZ));
}
static int __devinit qlge_probe(struct pci_dev *pdev,
@@ -4713,6 +4712,8 @@
netif_stop_queue(ndev);
}
+ /* Disabling the timer */
+ del_timer_sync(&qdev->timer);
if (test_bit(QL_ADAPTER_UP, &qdev->flags))
cancel_delayed_work_sync(&qdev->asic_reset_work);
cancel_delayed_work_sync(&qdev->mpi_reset_work);
@@ -4808,8 +4809,7 @@
netif_err(qdev, ifup, qdev->ndev,
"Device was not running prior to EEH.\n");
}
- qdev->timer.expires = jiffies + (5*HZ);
- add_timer(&qdev->timer);
+ mod_timer(&qdev->timer, jiffies + (5*HZ));
netif_device_attach(ndev);
}
@@ -4871,8 +4871,7 @@
return err;
}
- qdev->timer.expires = jiffies + (5*HZ);
- add_timer(&qdev->timer);
+ mod_timer(&qdev->timer, jiffies + (5*HZ));
netif_device_attach(ndev);
return 0;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 217e709..cdc6a5c 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -559,6 +559,11 @@
break;
udelay(25);
}
+ /*
+ * According to hardware specs a 20us delay is required after write
+ * complete indication, but before sending next command.
+ */
+ udelay(20);
}
static int mdio_read(void __iomem *ioaddr, int reg_addr)
@@ -578,6 +583,12 @@
}
udelay(25);
}
+ /*
+ * According to hardware specs a 20us delay is required after read
+ * complete indication, but before sending next command.
+ */
+ udelay(20);
+
return value;
}
@@ -1305,7 +1316,7 @@
{ 0x7c800000, 0x28000000, RTL_GIGA_MAC_VER_26 },
/* 8168C family. */
- { 0x7cf00000, 0x3ca00000, RTL_GIGA_MAC_VER_24 },
+ { 0x7cf00000, 0x3cb00000, RTL_GIGA_MAC_VER_24 },
{ 0x7cf00000, 0x3c900000, RTL_GIGA_MAC_VER_23 },
{ 0x7cf00000, 0x3c800000, RTL_GIGA_MAC_VER_18 },
{ 0x7c800000, 0x3c800000, RTL_GIGA_MAC_VER_24 },
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 668327c..1d37f0c 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -3130,7 +3130,6 @@
pkt_cnt++;
/* Updating the statistics block */
- nic->dev->stats.tx_bytes += skb->len;
swstats->mem_freed += skb->truesize;
dev_kfree_skb_irq(skb);
@@ -4901,48 +4900,81 @@
* Return value:
* pointer to the updated net_device_stats structure.
*/
-
static struct net_device_stats *s2io_get_stats(struct net_device *dev)
{
struct s2io_nic *sp = netdev_priv(dev);
- struct config_param *config = &sp->config;
struct mac_info *mac_control = &sp->mac_control;
struct stat_block *stats = mac_control->stats_info;
- int i;
+ u64 delta;
/* Configure Stats for immediate updt */
s2io_updt_stats(sp);
- /* Using sp->stats as a staging area, because reset (due to mtu
- change, for example) will clear some hardware counters */
- dev->stats.tx_packets += le32_to_cpu(stats->tmac_frms) -
- sp->stats.tx_packets;
- sp->stats.tx_packets = le32_to_cpu(stats->tmac_frms);
+ /* A device reset will cause the on-adapter statistics to be zero'ed.
+ * This can be done while running by changing the MTU. To prevent the
+ * system from having the stats zero'ed, the driver keeps a copy of the
+ * last update to the system (which is also zero'ed on reset). This
+ * enables the driver to accurately know the delta between the last
+ * update and the current update.
+ */
+ delta = ((u64) le32_to_cpu(stats->rmac_vld_frms_oflow) << 32 |
+ le32_to_cpu(stats->rmac_vld_frms)) - sp->stats.rx_packets;
+ sp->stats.rx_packets += delta;
+ dev->stats.rx_packets += delta;
- dev->stats.tx_errors += le32_to_cpu(stats->tmac_any_err_frms) -
- sp->stats.tx_errors;
- sp->stats.tx_errors = le32_to_cpu(stats->tmac_any_err_frms);
+ delta = ((u64) le32_to_cpu(stats->tmac_frms_oflow) << 32 |
+ le32_to_cpu(stats->tmac_frms)) - sp->stats.tx_packets;
+ sp->stats.tx_packets += delta;
+ dev->stats.tx_packets += delta;
- dev->stats.rx_errors += le64_to_cpu(stats->rmac_drop_frms) -
- sp->stats.rx_errors;
- sp->stats.rx_errors = le64_to_cpu(stats->rmac_drop_frms);
+ delta = ((u64) le32_to_cpu(stats->rmac_data_octets_oflow) << 32 |
+ le32_to_cpu(stats->rmac_data_octets)) - sp->stats.rx_bytes;
+ sp->stats.rx_bytes += delta;
+ dev->stats.rx_bytes += delta;
- dev->stats.multicast = le32_to_cpu(stats->rmac_vld_mcst_frms) -
- sp->stats.multicast;
- sp->stats.multicast = le32_to_cpu(stats->rmac_vld_mcst_frms);
+ delta = ((u64) le32_to_cpu(stats->tmac_data_octets_oflow) << 32 |
+ le32_to_cpu(stats->tmac_data_octets)) - sp->stats.tx_bytes;
+ sp->stats.tx_bytes += delta;
+ dev->stats.tx_bytes += delta;
- dev->stats.rx_length_errors = le64_to_cpu(stats->rmac_long_frms) -
- sp->stats.rx_length_errors;
- sp->stats.rx_length_errors = le64_to_cpu(stats->rmac_long_frms);
+ delta = le64_to_cpu(stats->rmac_drop_frms) - sp->stats.rx_errors;
+ sp->stats.rx_errors += delta;
+ dev->stats.rx_errors += delta;
- /* collect per-ring rx_packets and rx_bytes */
- dev->stats.rx_packets = dev->stats.rx_bytes = 0;
- for (i = 0; i < config->rx_ring_num; i++) {
- struct ring_info *ring = &mac_control->rings[i];
+ delta = ((u64) le32_to_cpu(stats->tmac_any_err_frms_oflow) << 32 |
+ le32_to_cpu(stats->tmac_any_err_frms)) - sp->stats.tx_errors;
+ sp->stats.tx_errors += delta;
+ dev->stats.tx_errors += delta;
- dev->stats.rx_packets += ring->rx_packets;
- dev->stats.rx_bytes += ring->rx_bytes;
- }
+ delta = le64_to_cpu(stats->rmac_drop_frms) - sp->stats.rx_dropped;
+ sp->stats.rx_dropped += delta;
+ dev->stats.rx_dropped += delta;
+
+ delta = le64_to_cpu(stats->tmac_drop_frms) - sp->stats.tx_dropped;
+ sp->stats.tx_dropped += delta;
+ dev->stats.tx_dropped += delta;
+
+ /* The adapter MAC interprets pause frames as multicast packets, but
+ * does not pass them up. This erroneously increases the multicast
+ * packet count and needs to be deducted when the multicast frame count
+ * is queried.
+ */
+ delta = (u64) le32_to_cpu(stats->rmac_vld_mcst_frms_oflow) << 32 |
+ le32_to_cpu(stats->rmac_vld_mcst_frms);
+ delta -= le64_to_cpu(stats->rmac_pause_ctrl_frms);
+ delta -= sp->stats.multicast;
+ sp->stats.multicast += delta;
+ dev->stats.multicast += delta;
+
+ delta = ((u64) le32_to_cpu(stats->rmac_usized_frms_oflow) << 32 |
+ le32_to_cpu(stats->rmac_usized_frms)) +
+ le64_to_cpu(stats->rmac_long_frms) - sp->stats.rx_length_errors;
+ sp->stats.rx_length_errors += delta;
+ dev->stats.rx_length_errors += delta;
+
+ delta = le64_to_cpu(stats->rmac_fcs_err_frms) - sp->stats.rx_crc_errors;
+ sp->stats.rx_crc_errors += delta;
+ dev->stats.rx_crc_errors += delta;
return &dev->stats;
}
@@ -7455,15 +7487,11 @@
}
}
- /* Updating statistics */
- ring_data->rx_packets++;
rxdp->Host_Control = 0;
if (sp->rxd_mode == RXD_MODE_1) {
int len = RXD_GET_BUFFER0_SIZE_1(rxdp->Control_2);
- ring_data->rx_bytes += len;
skb_put(skb, len);
-
} else if (sp->rxd_mode == RXD_MODE_3B) {
int get_block = ring_data->rx_curr_get_info.block_index;
int get_off = ring_data->rx_curr_get_info.offset;
@@ -7472,7 +7500,6 @@
unsigned char *buff = skb_push(skb, buf0_len);
struct buffAdd *ba = &ring_data->ba[get_block][get_off];
- ring_data->rx_bytes += buf0_len + buf2_len;
memcpy(buff, ba->ba_0, buf0_len);
skb_put(skb, buf2_len);
}
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 47c36e0..5e52c75 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -745,10 +745,6 @@
/* Buffer Address store. */
struct buffAdd **ba;
-
- /* per-Ring statistics */
- unsigned long rx_packets;
- unsigned long rx_bytes;
} ____cacheline_aligned;
/* Fifo specific structure */
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index 1f3acc3..79eee30 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -2671,6 +2671,7 @@
.remove = __exit_p(sbmac_remove),
.driver = {
.name = sbmac_string,
+ .owner = THIS_MODULE,
},
};
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index 2e6fd89..4762c91 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -830,7 +830,7 @@
static inline unsigned int efx_port_num(struct efx_nic *efx)
{
- return PCI_FUNC(efx->pci_dev->devfn);
+ return efx->net_dev->dev_id;
}
/**
diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c
index 727b422..f2b1e61 100644
--- a/drivers/net/sfc/siena.c
+++ b/drivers/net/sfc/siena.c
@@ -206,6 +206,7 @@
{
struct siena_nic_data *nic_data;
bool already_attached = 0;
+ efx_oword_t reg;
int rc;
/* Allocate storage for hardware specific data */
@@ -220,6 +221,9 @@
goto fail1;
}
+ efx_reado(efx, ®, FR_AZ_CS_DEBUG);
+ efx->net_dev->dev_id = EFX_OWORD_FIELD(reg, FRF_CZ_CS_PORT_NUM) - 1;
+
efx_mcdi_init(efx);
/* Recover from a failed assertion before probing */
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 2111c7b..7985165 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -717,11 +717,24 @@
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
+/* Enable Rx/Tx */
+static void sky2_enable_rx_tx(struct sky2_port *sky2)
+{
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ u16 reg;
+
+ reg = gma_read16(hw, port, GM_GP_CTRL);
+ reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
+ gma_write16(hw, port, GM_GP_CTRL, reg);
+}
+
/* Force a renegotiation */
static void sky2_phy_reinit(struct sky2_port *sky2)
{
spin_lock_bh(&sky2->phy_lock);
sky2_phy_init(sky2->hw, sky2->port);
+ sky2_enable_rx_tx(sky2);
spin_unlock_bh(&sky2->phy_lock);
}
@@ -2040,7 +2053,6 @@
{
struct sky2_hw *hw = sky2->hw;
unsigned port = sky2->port;
- u16 reg;
static const char *fc_name[] = {
[FC_NONE] = "none",
[FC_TX] = "tx",
@@ -2048,10 +2060,7 @@
[FC_BOTH] = "both",
};
- /* enable Rx/Tx */
- reg = gma_read16(hw, port, GM_GP_CTRL);
- reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
- gma_write16(hw, port, GM_GP_CTRL, reg);
+ sky2_enable_rx_tx(sky2);
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 20ab161..737df60 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -646,7 +646,7 @@
error = copy_from_user(data, ifr->ifr_data, sizeof(data));
if (error) {
pr_err("cant copy from user\n");
- RET(error);
+ RET(-EFAULT);
}
DBG("%d 0x%x 0x%x\n", data[0], data[1], data[2]);
}
@@ -665,7 +665,7 @@
data[2]);
error = copy_to_user(ifr->ifr_data, data, sizeof(data));
if (error)
- RET(error);
+ RET(-EFAULT);
break;
case BDX_OP_WRITE:
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index c0e7000..06b552f 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -367,8 +367,8 @@
static u16 t21041_csr15[] = { 0x0008, 0x0006, 0x000E, 0x0008, 0x0008, };
-#define dr32(reg) readl(de->regs + (reg))
-#define dw32(reg,val) writel((val), de->regs + (reg))
+#define dr32(reg) ioread32(de->regs + (reg))
+#define dw32(reg, val) iowrite32((val), de->regs + (reg))
static void de_rx_err_acct (struct de_private *de, unsigned rx_tail,
@@ -1706,6 +1706,7 @@
int value, boguscnt = 100000;
do {
value = dr32(ROMCmd);
+ rmb();
} while (value < 0 && --boguscnt > 0);
de->dev->dev_addr[i] = value;
udelay(1);
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 4a34833..807470e 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -3215,6 +3215,8 @@
__func__, __LINE__, (u32) skb);
if (skb) {
skb->data = skb->head + NET_SKB_PAD;
+ skb->len = 0;
+ skb_reset_tail_pointer(skb);
__skb_queue_head(&ugeth->rx_recycle, skb);
}
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index 1f802e9..9516f38 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -344,7 +344,7 @@
return 2;
}
- if (size > ETH_FRAME_LEN) {
+ if (size > dev->net->mtu + ETH_HLEN) {
netdev_err(dev->net, "asix_rx_fixup() Bad RX Length %d\n",
size);
return 0;
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 0a3c41f..4dd2351 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1334,7 +1334,6 @@
/* check for port already opened, if not set the termios */
serial->open_count++;
if (serial->open_count == 1) {
- tty->low_latency = 1;
serial->rx_state = RX_IDLE;
/* Force default termio settings */
_hso_serial_set_termios(tty, NULL);
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 28d3ee1..dd8a4ad 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -104,10 +104,8 @@
int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen)
{
struct cdc_state *info = (void *) &dev->data;
- struct usb_cdc_notification notification;
int master_ifnum;
int retval;
- int partial;
unsigned count;
__le32 rsp;
u32 xid = 0, msg_len, request_id;
@@ -135,17 +133,13 @@
if (unlikely(retval < 0 || xid == 0))
return retval;
- /* Some devices don't respond on the control channel until
- * polled on the status channel, so do that first. */
- retval = usb_interrupt_msg(
- dev->udev,
- usb_rcvintpipe(dev->udev, dev->status->desc.bEndpointAddress),
- ¬ification, sizeof(notification), &partial,
- RNDIS_CONTROL_TIMEOUT_MS);
- if (unlikely(retval < 0))
- return retval;
+ // FIXME Seems like some devices discard responses when
+ // we time out and cancel our "get response" requests...
+ // so, this is fragile. Probably need to poll for status.
- /* Poll the control channel; the request probably completed immediately */
+ /* ignore status endpoint, just poll the control channel;
+ * the request probably completed immediately
+ */
rsp = buf->msg_type | RNDIS_MSG_COMPLETION;
for (count = 0; count < 10; count++) {
memset(buf, 0, CONTROL_BUFFER_SIZE);
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index a95c73d..81c76ad 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1293,6 +1293,9 @@
goto out;
}
+ /* netdev_printk() needs this so do it as early as possible */
+ SET_NETDEV_DEV(net, &udev->dev);
+
dev = netdev_priv(net);
dev->udev = xdev;
dev->intf = udev;
@@ -1377,8 +1380,6 @@
dev->rx_urb_size = dev->hard_mtu;
dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
- SET_NETDEV_DEV(net, &udev->dev);
-
if ((dev->driver_info->flags & FLAG_WLAN) != 0)
SET_NETDEV_DEVTYPE(net, &wlan_type);
if ((dev->driver_info->flags & FLAG_WWAN) != 0)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 78eb319..bb6b67f 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -340,7 +340,7 @@
skb_to_sgvec(skb, vi->rx_sg + 1, 0, skb->len);
- err = virtqueue_add_buf(vi->rvq, vi->rx_sg, 0, 2, skb);
+ err = virtqueue_add_buf_gfp(vi->rvq, vi->rx_sg, 0, 2, skb, gfp);
if (err < 0)
dev_kfree_skb(skb);
@@ -385,8 +385,8 @@
/* chain first in list head */
first->private = (unsigned long)list;
- err = virtqueue_add_buf(vi->rvq, vi->rx_sg, 0, MAX_SKB_FRAGS + 2,
- first);
+ err = virtqueue_add_buf_gfp(vi->rvq, vi->rx_sg, 0, MAX_SKB_FRAGS + 2,
+ first, gfp);
if (err < 0)
give_pages(vi, first);
@@ -404,7 +404,7 @@
sg_init_one(vi->rx_sg, page_address(page), PAGE_SIZE);
- err = virtqueue_add_buf(vi->rvq, vi->rx_sg, 0, 1, page);
+ err = virtqueue_add_buf_gfp(vi->rvq, vi->rx_sg, 0, 1, page, gfp);
if (err < 0)
give_pages(vi, page);
@@ -415,7 +415,7 @@
static bool try_fill_recv(struct virtnet_info *vi, gfp_t gfp)
{
int err;
- bool oom = false;
+ bool oom;
do {
if (vi->mergeable_rx_bufs)
@@ -425,10 +425,9 @@
else
err = add_recvbuf_small(vi, gfp);
- if (err < 0) {
- oom = true;
+ oom = err == -ENOMEM;
+ if (err < 0)
break;
- }
++vi->num;
} while (err > 0);
if (unlikely(vi->num > vi->max))
@@ -563,7 +562,6 @@
struct virtnet_info *vi = netdev_priv(dev);
int capacity;
-again:
/* Free up any pending old buffers before queueing new ones. */
free_old_xmit_skbs(vi);
@@ -572,14 +570,20 @@
/* This can happen with OOM and indirect buffers. */
if (unlikely(capacity < 0)) {
- netif_stop_queue(dev);
- dev_warn(&dev->dev, "Unexpected full queue\n");
- if (unlikely(!virtqueue_enable_cb(vi->svq))) {
- virtqueue_disable_cb(vi->svq);
- netif_start_queue(dev);
- goto again;
+ if (net_ratelimit()) {
+ if (likely(capacity == -ENOMEM)) {
+ dev_warn(&dev->dev,
+ "TX queue failure: out of memory\n");
+ } else {
+ dev->stats.tx_fifo_errors++;
+ dev_warn(&dev->dev,
+ "Unexpected TX queue failure: %d\n",
+ capacity);
+ }
}
- return NETDEV_TX_BUSY;
+ dev->stats.tx_dropped++;
+ kfree_skb(skb);
+ return NETDEV_TX_OK;
}
virtqueue_kick(vi->svq);
diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c
index b504bd5..fc8b2d7 100644
--- a/drivers/net/vxge/vxge-main.c
+++ b/drivers/net/vxge/vxge-main.c
@@ -2262,7 +2262,8 @@
vxge_debug_init(VXGE_ERR,
"%s: memory allocation failed",
VXGE_DRIVER_NAME);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto alloc_entries_failed;
}
vdev->vxge_entries =
@@ -2271,8 +2272,8 @@
if (!vdev->vxge_entries) {
vxge_debug_init(VXGE_ERR, "%s: memory allocation failed",
VXGE_DRIVER_NAME);
- kfree(vdev->entries);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto alloc_vxge_entries_failed;
}
for (i = 0, j = 0; i < vdev->no_of_vpath; i++) {
@@ -2303,22 +2304,32 @@
vxge_debug_init(VXGE_ERR,
"%s: MSI-X enable failed for %d vectors, ret: %d",
VXGE_DRIVER_NAME, vdev->intr_cnt, ret);
+ if ((max_config_vpath != VXGE_USE_DEFAULT) || (ret < 3)) {
+ ret = -ENODEV;
+ goto enable_msix_failed;
+ }
+
kfree(vdev->entries);
kfree(vdev->vxge_entries);
vdev->entries = NULL;
vdev->vxge_entries = NULL;
-
- if ((max_config_vpath != VXGE_USE_DEFAULT) || (ret < 3))
- return -ENODEV;
/* Try with less no of vector by reducing no of vpaths count */
temp = (ret - 1)/2;
vxge_close_vpaths(vdev, temp);
vdev->no_of_vpath = temp;
goto start;
- } else if (ret < 0)
- return -ENODEV;
-
+ } else if (ret < 0) {
+ ret = -ENODEV;
+ goto enable_msix_failed;
+ }
return 0;
+
+enable_msix_failed:
+ kfree(vdev->vxge_entries);
+alloc_vxge_entries_failed:
+ kfree(vdev->entries);
+alloc_entries_failed:
+ return ret;
}
static int vxge_enable_msix(struct vxgedev *vdev)
@@ -4506,9 +4517,9 @@
char version[32];
snprintf(version, 32, "%s", DRV_VERSION);
- printk(KERN_CRIT "%s: Copyright(c) 2002-2009 Neterion Inc\n",
+ printk(KERN_INFO "%s: Copyright(c) 2002-2009 Neterion Inc\n",
VXGE_DRIVER_NAME);
- printk(KERN_CRIT "%s: Driver version: %s\n",
+ printk(KERN_INFO "%s: Driver version: %s\n",
VXGE_DRIVER_NAME, version);
verify_bandwidth();
diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c
index 166e77d..e47f5a9 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -37,8 +37,6 @@
#include <net/x25device.h>
#include "x25_asy.h"
-#include <net/x25device.h>
-
static struct net_device **x25_asy_devs;
static int x25_asy_maxdev = SL_NRUNIT;
diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c
index 3f283bf..1149135 100644
--- a/drivers/net/wimax/i2400m/fw.c
+++ b/drivers/net/wimax/i2400m/fw.c
@@ -1192,7 +1192,7 @@
unsigned module_type, header_len, major_version, minor_version,
module_id, module_vendor, date, size;
- module_type = bcf_hdr->module_type;
+ module_type = le32_to_cpu(bcf_hdr->module_type);
header_len = sizeof(u32) * le32_to_cpu(bcf_hdr->header_len);
major_version = (le32_to_cpu(bcf_hdr->header_version) & 0xffff0000)
>> 16;
diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index 82ab532..a93dc18 100644
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -739,17 +739,27 @@
static void ar9170_usb_firmware_failed(struct ar9170_usb *aru)
{
struct device *parent = aru->udev->dev.parent;
+ struct usb_device *udev;
+
+ /*
+ * Store a copy of the usb_device pointer locally.
+ * This is because device_release_driver initiates
+ * ar9170_usb_disconnect, which in turn frees our
+ * driver context (aru).
+ */
+ udev = aru->udev;
complete(&aru->firmware_loading_complete);
/* unbind anything failed */
if (parent)
device_lock(parent);
- device_release_driver(&aru->udev->dev);
+
+ device_release_driver(&udev->dev);
if (parent)
device_unlock(parent);
- usb_put_dev(aru->udev);
+ usb_put_dev(udev);
}
static void ar9170_usb_firmware_finish(const struct firmware *fw, void *context)
diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
index e0c244b..31c0080 100644
--- a/drivers/net/wireless/ath/ath5k/attach.c
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -126,6 +126,7 @@
ah->ah_ant_mode = AR5K_ANTMODE_DEFAULT;
ah->ah_noise_floor = -95; /* until first NF calibration is run */
sc->ani_state.ani_mode = ATH5K_ANI_MODE_AUTO;
+ ah->ah_current_channel = &sc->channels[0];
/*
* Find the mac version
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index cc6d41d..648972d 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -195,7 +195,7 @@
static int __devinit ath5k_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id);
static void __devexit ath5k_pci_remove(struct pci_dev *pdev);
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int ath5k_pci_suspend(struct device *dev);
static int ath5k_pci_resume(struct device *dev);
@@ -203,7 +203,7 @@
#define ATH5K_PM_OPS (&ath5k_pm_ops)
#else
#define ATH5K_PM_OPS NULL
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM_SLEEP */
static struct pci_driver ath5k_pci_driver = {
.name = KBUILD_MODNAME,
@@ -222,7 +222,6 @@
static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ath5k_txq *txq);
static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan);
-static int ath5k_reset_wake(struct ath5k_softc *sc);
static int ath5k_start(struct ieee80211_hw *hw);
static void ath5k_stop(struct ieee80211_hw *hw);
static int ath5k_add_interface(struct ieee80211_hw *hw,
@@ -709,7 +708,7 @@
ieee80211_free_hw(hw);
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int ath5k_pci_suspend(struct device *dev)
{
struct ieee80211_hw *hw = pci_get_drvdata(to_pci_dev(dev));
@@ -735,7 +734,7 @@
ath5k_led_enable(sc);
return 0;
}
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM_SLEEP */
/***********************\
@@ -2770,7 +2769,7 @@
{
struct ath5k_softc *sc = (void *)data;
- ath5k_reset_wake(sc);
+ ath5k_reset(sc, sc->curchan);
}
/*
@@ -2941,23 +2940,13 @@
ath5k_beacon_config(sc);
/* intrs are enabled by ath5k_beacon_config */
+ ieee80211_wake_queues(sc->hw);
+
return 0;
err:
return ret;
}
-static int
-ath5k_reset_wake(struct ath5k_softc *sc)
-{
- int ret;
-
- ret = ath5k_reset(sc, sc->curchan);
- if (!ret)
- ieee80211_wake_queues(sc->hw);
-
- return ret;
-}
-
static int ath5k_start(struct ieee80211_hw *hw)
{
return ath5k_init(hw->priv);
@@ -3151,13 +3140,15 @@
if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
if (*new_flags & FIF_PROMISC_IN_BSS) {
- rfilt |= AR5K_RX_FILTER_PROM;
__set_bit(ATH_STAT_PROMISC, sc->status);
} else {
__clear_bit(ATH_STAT_PROMISC, sc->status);
}
}
+ if (test_bit(ATH_STAT_PROMISC, sc->status))
+ rfilt |= AR5K_RX_FILTER_PROM;
+
/* Note, AR5K_RX_FILTER_MCAST is already enabled */
if (*new_flags & FIF_ALLMULTI) {
mfilt[0] = ~0;
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 1b81c47..492cbb1 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1814,6 +1814,13 @@
u8 def_ant, tx_ant, ee_mode;
u32 sta_id1 = 0;
+ /* if channel is not initialized yet we can't set the antennas
+ * so just store the mode. it will be set on the next reset */
+ if (channel == NULL) {
+ ah->ah_ant_mode = ant_mode;
+ return;
+ }
+
def_ant = ah->ah_def_ant;
ATH5K_TRACE(ah->ah_sc);
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index fbb7dec..5ea8773 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -445,6 +445,7 @@
#define SC_OP_TSF_RESET BIT(11)
#define SC_OP_BT_PRIORITY_DETECTED BIT(12)
#define SC_OP_BT_SCAN BIT(13)
+#define SC_OP_ANI_RUN BIT(14)
/* Powersave flags */
#define PS_WAIT_FOR_BEACON BIT(0)
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 77b3591..23c15aa 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -730,13 +730,17 @@
/* RX */
if (ath9k_hif_usb_alloc_rx_urbs(hif_dev) < 0)
- goto err;
+ goto err_rx;
/* Register Read */
if (ath9k_hif_usb_alloc_reg_in_urb(hif_dev) < 0)
- goto err;
+ goto err_reg;
return 0;
+err_reg:
+ ath9k_hif_usb_dealloc_rx_urbs(hif_dev);
+err_rx:
+ ath9k_hif_usb_dealloc_tx_urbs(hif_dev);
err:
return -ENOMEM;
}
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index abfa049..1e2a68e 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -336,6 +336,10 @@
static void ath_start_ani(struct ath_common *common)
{
unsigned long timestamp = jiffies_to_msecs(jiffies);
+ struct ath_softc *sc = (struct ath_softc *) common->priv;
+
+ if (!(sc->sc_flags & SC_OP_ANI_RUN))
+ return;
common->ani.longcal_timer = timestamp;
common->ani.shortcal_timer = timestamp;
@@ -872,11 +876,13 @@
/* Reset rssi stats */
sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
+ sc->sc_flags |= SC_OP_ANI_RUN;
ath_start_ani(common);
} else {
ath_print(common, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
common->curaid = 0;
/* Stop ANI */
+ sc->sc_flags &= ~SC_OP_ANI_RUN;
del_timer_sync(&common->ani.timer);
}
}
@@ -1478,8 +1484,10 @@
if (vif->type == NL80211_IFTYPE_AP ||
vif->type == NL80211_IFTYPE_ADHOC ||
- vif->type == NL80211_IFTYPE_MONITOR)
+ vif->type == NL80211_IFTYPE_MONITOR) {
+ sc->sc_flags |= SC_OP_ANI_RUN;
ath_start_ani(common);
+ }
out:
mutex_unlock(&sc->mutex);
@@ -1500,6 +1508,7 @@
mutex_lock(&sc->mutex);
/* Stop ANI */
+ sc->sc_flags &= ~SC_OP_ANI_RUN;
del_timer_sync(&common->ani.timer);
/* Reclaim beacon resources */
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 3db1917..859aa4a 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1198,7 +1198,7 @@
int r;
ath_print(common, ATH_DBG_FATAL,
- "Unable to stop TxDMA. Reset HAL!\n");
+ "Failed to stop TX DMA. Resetting hardware!\n");
spin_lock_bh(&sc->sc_resetlock);
r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false);
@@ -1728,6 +1728,8 @@
} else
bf->bf_isnullfunc = false;
+ bf->bf_tx_aborted = false;
+
return 0;
}
@@ -1989,7 +1991,7 @@
int nbad = 0;
int isaggr = 0;
- if (bf->bf_tx_aborted)
+ if (bf->bf_lastbf->bf_tx_aborted)
return 0;
isaggr = bf_isaggr(bf);
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index db72461..29b31a6 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -594,6 +594,7 @@
local_info_t *local;
int ret = 1;
struct hostap_cs_priv *hw_priv;
+ unsigned long flags;
PDEBUG(DEBUG_FLOW, "prism2_config()\n");
@@ -625,9 +626,15 @@
local->hw_priv = hw_priv;
hw_priv->link = link;
+ /*
+ * Make sure the IRQ handler cannot proceed until at least
+ * dev->base_addr is initialized.
+ */
+ spin_lock_irqsave(&local->irq_init_lock, flags);
+
ret = pcmcia_request_irq(link, prism2_interrupt);
if (ret)
- goto failed;
+ goto failed_unlock;
/*
* This actually configures the PCMCIA socket -- setting up
@@ -636,11 +643,13 @@
*/
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
- goto failed;
+ goto failed_unlock;
dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
+ spin_unlock_irqrestore(&local->irq_init_lock, flags);
+
/* Finally, report what we've done */
printk(KERN_INFO "%s: index 0x%02x: ",
dev_info, link->conf.ConfigIndex);
@@ -667,6 +676,8 @@
return ret;
+ failed_unlock:
+ spin_unlock_irqrestore(&local->irq_init_lock, flags);
failed:
kfree(hw_priv);
prism2_release((u_long)link);
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index d707328..2f999fc 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -2618,17 +2618,20 @@
int events = 0;
u16 ev;
+ iface = netdev_priv(dev);
+ local = iface->local;
+
/* Detect early interrupt before driver is fully configued */
+ spin_lock(&local->irq_init_lock);
if (!dev->base_addr) {
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: Interrupt, but dev not configured\n",
dev->name);
}
+ spin_unlock(&local->irq_init_lock);
return IRQ_HANDLED;
}
-
- iface = netdev_priv(dev);
- local = iface->local;
+ spin_unlock(&local->irq_init_lock);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 0);
@@ -3147,6 +3150,7 @@
spin_lock_init(&local->cmdlock);
spin_lock_init(&local->baplock);
spin_lock_init(&local->lock);
+ spin_lock_init(&local->irq_init_lock);
mutex_init(&local->rid_bap_mtx);
if (card_idx < 0 || card_idx >= MAX_PARM_DEVICES)
diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c
index d24dc7d..972a9c3 100644
--- a/drivers/net/wireless/hostap/hostap_pci.c
+++ b/drivers/net/wireless/hostap/hostap_pci.c
@@ -330,6 +330,7 @@
dev->irq = pdev->irq;
hw_priv->mem_start = mem;
+ dev->base_addr = (unsigned long) mem;
prism2_pci_cor_sreset(local);
diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h
index 3d23891..1ba33be 100644
--- a/drivers/net/wireless/hostap/hostap_wlan.h
+++ b/drivers/net/wireless/hostap/hostap_wlan.h
@@ -654,7 +654,7 @@
rwlock_t iface_lock; /* hostap_interfaces read lock; use write lock
* when removing entries from the list.
* TX and RX paths can use read lock. */
- spinlock_t cmdlock, baplock, lock;
+ spinlock_t cmdlock, baplock, lock, irq_init_lock;
struct mutex rid_bap_mtx;
u16 infofid; /* MAC buffer id for info frame */
/* txfid, intransmitfid, next_txtid, and next_alloc are protected by
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 068f7f8..c44a303 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -2852,6 +2852,7 @@
.isr = iwl_isr_legacy,
.config_ap = iwl3945_config_ap,
.manage_ibss_station = iwl3945_manage_ibss_station,
+ .recover_from_tx_stall = iwl_bg_monitor_recover,
.check_plcp_health = iwl3945_good_plcp_health,
.debugfs_ops = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
index 44ef5d9..01658cf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
@@ -212,11 +212,7 @@
static void iwlagn_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
__le32 *tx_flags)
{
- if ((info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
- (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT))
- *tx_flags |= TX_CMD_FLG_RTS_CTS_MSK;
- else
- *tx_flags &= ~TX_CMD_FLG_RTS_CTS_MSK;
+ *tx_flags |= TX_CMD_FLG_RTS_CTS_MSK;
}
/* Calc max signal level (dBm) among 3 possible receivers */
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
index 1004cfc..0f292a2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
@@ -1119,10 +1119,9 @@
struct iwl_scan_channel *scan_ch)
{
const struct ieee80211_supported_band *sband;
- const struct iwl_channel_info *ch_info;
u16 passive_dwell = 0;
u16 active_dwell = 0;
- int i, added = 0;
+ int added = 0;
u16 channel = 0;
sband = iwl_get_hw_mode(priv, band);
@@ -1137,32 +1136,7 @@
if (passive_dwell <= active_dwell)
passive_dwell = active_dwell + 1;
- /* only scan single channel, good enough to reset the RF */
- /* pick the first valid not in-use channel */
- if (band == IEEE80211_BAND_5GHZ) {
- for (i = 14; i < priv->channel_count; i++) {
- if (priv->channel_info[i].channel !=
- le16_to_cpu(priv->staging_rxon.channel)) {
- channel = priv->channel_info[i].channel;
- ch_info = iwl_get_channel_info(priv,
- band, channel);
- if (is_channel_valid(ch_info))
- break;
- }
- }
- } else {
- for (i = 0; i < 14; i++) {
- if (priv->channel_info[i].channel !=
- le16_to_cpu(priv->staging_rxon.channel)) {
- channel =
- priv->channel_info[i].channel;
- ch_info = iwl_get_channel_info(priv,
- band, channel);
- if (is_channel_valid(ch_info))
- break;
- }
- }
- }
+ channel = iwl_get_single_channel_number(priv, band);
if (channel) {
scan_ch->channel = cpu_to_le16(channel);
scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
index c402bfc..7d614c4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
@@ -1125,6 +1125,7 @@
struct ieee80211_sta *sta;
struct iwl_station_priv *sta_priv;
+ rcu_read_lock();
sta = ieee80211_find_sta(priv->vif, hdr->addr1);
if (sta) {
sta_priv = (void *)sta->drv_priv;
@@ -1133,6 +1134,7 @@
atomic_dec_return(&sta_priv->pending_frames) == 0)
ieee80211_sta_block_awake(priv->hw, sta, false);
}
+ rcu_read_unlock();
ieee80211_tx_status_irqsafe(priv->hw, skb);
}
@@ -1297,6 +1299,11 @@
sta_id = ba_resp->sta_id;
tid = ba_resp->tid;
agg = &priv->stations[sta_id].tid[tid].agg;
+ if (unlikely(agg->txq_id != scd_flow)) {
+ IWL_ERR(priv, "BA scd_flow %d does not match txq_id %d\n",
+ scd_flow, agg->txq_id);
+ return;
+ }
/* Find index just before block-ack window */
index = iwl_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index aef4f71..24aff65 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1484,6 +1484,156 @@
}
+/*****************************************************************************
+ *
+ * sysfs attributes
+ *
+ *****************************************************************************/
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+
+/*
+ * The following adds a new attribute to the sysfs representation
+ * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
+ * used for controlling the debug level.
+ *
+ * See the level definitions in iwl for details.
+ *
+ * The debug_level being managed using sysfs below is a per device debug
+ * level that is used instead of the global debug level if it (the per
+ * device debug level) is set.
+ */
+static ssize_t show_debug_level(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct iwl_priv *priv = dev_get_drvdata(d);
+ return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
+}
+static ssize_t store_debug_level(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct iwl_priv *priv = dev_get_drvdata(d);
+ unsigned long val;
+ int ret;
+
+ ret = strict_strtoul(buf, 0, &val);
+ if (ret)
+ IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf);
+ else {
+ priv->debug_level = val;
+ if (iwl_alloc_traffic_mem(priv))
+ IWL_ERR(priv,
+ "Not enough memory to generate traffic log\n");
+ }
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
+ show_debug_level, store_debug_level);
+
+
+#endif /* CONFIG_IWLWIFI_DEBUG */
+
+
+static ssize_t show_temperature(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct iwl_priv *priv = dev_get_drvdata(d);
+
+ if (!iwl_is_alive(priv))
+ return -EAGAIN;
+
+ return sprintf(buf, "%d\n", priv->temperature);
+}
+
+static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
+
+static ssize_t show_tx_power(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct iwl_priv *priv = dev_get_drvdata(d);
+
+ if (!iwl_is_ready_rf(priv))
+ return sprintf(buf, "off\n");
+ else
+ return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
+}
+
+static ssize_t store_tx_power(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct iwl_priv *priv = dev_get_drvdata(d);
+ unsigned long val;
+ int ret;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret)
+ IWL_INFO(priv, "%s is not in decimal form.\n", buf);
+ else {
+ ret = iwl_set_tx_power(priv, val, false);
+ if (ret)
+ IWL_ERR(priv, "failed setting tx power (0x%d).\n",
+ ret);
+ else
+ ret = count;
+ }
+ return ret;
+}
+
+static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
+
+static ssize_t show_rts_ht_protection(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct iwl_priv *priv = dev_get_drvdata(d);
+
+ return sprintf(buf, "%s\n",
+ priv->cfg->use_rts_for_ht ? "RTS/CTS" : "CTS-to-self");
+}
+
+static ssize_t store_rts_ht_protection(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct iwl_priv *priv = dev_get_drvdata(d);
+ unsigned long val;
+ int ret;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret)
+ IWL_INFO(priv, "Input is not in decimal form.\n");
+ else {
+ if (!iwl_is_associated(priv))
+ priv->cfg->use_rts_for_ht = val ? true : false;
+ else
+ IWL_ERR(priv, "Sta associated with AP - "
+ "Change protection mechanism is not allowed\n");
+ ret = count;
+ }
+ return ret;
+}
+
+static DEVICE_ATTR(rts_ht_protection, S_IWUSR | S_IRUGO,
+ show_rts_ht_protection, store_rts_ht_protection);
+
+
+static struct attribute *iwl_sysfs_entries[] = {
+ &dev_attr_temperature.attr,
+ &dev_attr_tx_power.attr,
+ &dev_attr_rts_ht_protection.attr,
+#ifdef CONFIG_IWLWIFI_DEBUG
+ &dev_attr_debug_level.attr,
+#endif
+ NULL
+};
+
+static struct attribute_group iwl_attribute_group = {
+ .name = NULL, /* put in device directory */
+ .attrs = iwl_sysfs_entries,
+};
+
/******************************************************************************
*
* uCode download functions
@@ -1965,6 +2115,13 @@
if (err)
IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
+ err = sysfs_create_group(&priv->pci_dev->dev.kobj,
+ &iwl_attribute_group);
+ if (err) {
+ IWL_ERR(priv, "failed to create sysfs device attributes\n");
+ goto out_unbind;
+ }
+
/* We have our copies now, allow OS release its copies */
release_firmware(ucode_raw);
complete(&priv->_agn.firmware_loading_complete);
@@ -3234,10 +3391,12 @@
int ret;
u8 sta_id;
- sta_priv->common.sta_id = IWL_INVALID_STATION;
-
IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
sta->addr);
+ mutex_lock(&priv->mutex);
+ IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n",
+ sta->addr);
+ sta_priv->common.sta_id = IWL_INVALID_STATION;
atomic_set(&sta_priv->pending_frames, 0);
if (vif->type == NL80211_IFTYPE_AP)
@@ -3249,6 +3408,7 @@
IWL_ERR(priv, "Unable to add station %pM (%d)\n",
sta->addr, ret);
/* Should we return success if return code is EEXIST ? */
+ mutex_unlock(&priv->mutex);
return ret;
}
@@ -3258,147 +3418,13 @@
IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
sta->addr);
iwl_rs_rate_init(priv, sta, sta_id);
+ mutex_unlock(&priv->mutex);
return 0;
}
/*****************************************************************************
*
- * sysfs attributes
- *
- *****************************************************************************/
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-
-/*
- * The following adds a new attribute to the sysfs representation
- * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
- * used for controlling the debug level.
- *
- * See the level definitions in iwl for details.
- *
- * The debug_level being managed using sysfs below is a per device debug
- * level that is used instead of the global debug level if it (the per
- * device debug level) is set.
- */
-static ssize_t show_debug_level(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
-}
-static ssize_t store_debug_level(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- unsigned long val;
- int ret;
-
- ret = strict_strtoul(buf, 0, &val);
- if (ret)
- IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf);
- else {
- priv->debug_level = val;
- if (iwl_alloc_traffic_mem(priv))
- IWL_ERR(priv,
- "Not enough memory to generate traffic log\n");
- }
- return strnlen(buf, count);
-}
-
-static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
- show_debug_level, store_debug_level);
-
-
-#endif /* CONFIG_IWLWIFI_DEBUG */
-
-
-static ssize_t show_temperature(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
-
- if (!iwl_is_alive(priv))
- return -EAGAIN;
-
- return sprintf(buf, "%d\n", priv->temperature);
-}
-
-static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
-
-static ssize_t show_tx_power(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
-
- if (!iwl_is_ready_rf(priv))
- return sprintf(buf, "off\n");
- else
- return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
-}
-
-static ssize_t store_tx_power(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- unsigned long val;
- int ret;
-
- ret = strict_strtoul(buf, 10, &val);
- if (ret)
- IWL_INFO(priv, "%s is not in decimal form.\n", buf);
- else {
- ret = iwl_set_tx_power(priv, val, false);
- if (ret)
- IWL_ERR(priv, "failed setting tx power (0x%d).\n",
- ret);
- else
- ret = count;
- }
- return ret;
-}
-
-static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
-
-static ssize_t show_rts_ht_protection(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
-
- return sprintf(buf, "%s\n",
- priv->cfg->use_rts_for_ht ? "RTS/CTS" : "CTS-to-self");
-}
-
-static ssize_t store_rts_ht_protection(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- unsigned long val;
- int ret;
-
- ret = strict_strtoul(buf, 10, &val);
- if (ret)
- IWL_INFO(priv, "Input is not in decimal form.\n");
- else {
- if (!iwl_is_associated(priv))
- priv->cfg->use_rts_for_ht = val ? true : false;
- else
- IWL_ERR(priv, "Sta associated with AP - "
- "Change protection mechanism is not allowed\n");
- ret = count;
- }
- return ret;
-}
-
-static DEVICE_ATTR(rts_ht_protection, S_IWUSR | S_IRUGO,
- show_rts_ht_protection, store_rts_ht_protection);
-
-
-/*****************************************************************************
- *
* driver setup and teardown
*
*****************************************************************************/
@@ -3550,21 +3576,6 @@
kfree(priv->scan_cmd);
}
-static struct attribute *iwl_sysfs_entries[] = {
- &dev_attr_temperature.attr,
- &dev_attr_tx_power.attr,
- &dev_attr_rts_ht_protection.attr,
-#ifdef CONFIG_IWLWIFI_DEBUG
- &dev_attr_debug_level.attr,
-#endif
- NULL
-};
-
-static struct attribute_group iwl_attribute_group = {
- .name = NULL, /* put in device directory */
- .attrs = iwl_sysfs_entries,
-};
-
static struct ieee80211_ops iwl_hw_ops = {
.tx = iwl_mac_tx,
.start = iwl_mac_start,
@@ -3750,11 +3761,6 @@
IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
goto out_disable_msi;
}
- err = sysfs_create_group(&pdev->dev.kobj, &iwl_attribute_group);
- if (err) {
- IWL_ERR(priv, "failed to create sysfs device attributes\n");
- goto out_free_irq;
- }
iwl_setup_deferred_work(priv);
iwl_setup_rx_handlers(priv);
@@ -3788,15 +3794,13 @@
err = iwl_request_firmware(priv, true);
if (err)
- goto out_remove_sysfs;
+ goto out_destroy_workqueue;
return 0;
- out_remove_sysfs:
+ out_destroy_workqueue:
destroy_workqueue(priv->workqueue);
priv->workqueue = NULL;
- sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
- out_free_irq:
free_irq(priv->pci_dev->irq, priv);
iwl_free_isr_ict(priv);
out_disable_msi:
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 5a7eca8..5bbc529 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -854,6 +854,45 @@
}
EXPORT_SYMBOL(iwl_set_rxon_chain);
+/* Return valid channel */
+u8 iwl_get_single_channel_number(struct iwl_priv *priv,
+ enum ieee80211_band band)
+{
+ const struct iwl_channel_info *ch_info;
+ int i;
+ u8 channel = 0;
+
+ /* only scan single channel, good enough to reset the RF */
+ /* pick the first valid not in-use channel */
+ if (band == IEEE80211_BAND_5GHZ) {
+ for (i = 14; i < priv->channel_count; i++) {
+ if (priv->channel_info[i].channel !=
+ le16_to_cpu(priv->staging_rxon.channel)) {
+ channel = priv->channel_info[i].channel;
+ ch_info = iwl_get_channel_info(priv,
+ band, channel);
+ if (is_channel_valid(ch_info))
+ break;
+ }
+ }
+ } else {
+ for (i = 0; i < 14; i++) {
+ if (priv->channel_info[i].channel !=
+ le16_to_cpu(priv->staging_rxon.channel)) {
+ channel =
+ priv->channel_info[i].channel;
+ ch_info = iwl_get_channel_info(priv,
+ band, channel);
+ if (is_channel_valid(ch_info))
+ break;
+ }
+ }
+ }
+
+ return channel;
+}
+EXPORT_SYMBOL(iwl_get_single_channel_number);
+
/**
* iwl_set_rxon_channel - Set the phymode and channel values in staging RXON
* @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz
@@ -1275,7 +1314,6 @@
changed_flags, *total_flags);
CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
- CHK(FIF_ALLMULTI, RXON_FILTER_ACCEPT_GRP_MSK);
CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK);
CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
@@ -1290,6 +1328,12 @@
mutex_unlock(&priv->mutex);
+ /*
+ * Receiving all multicast frames is always enabled by the
+ * default flags setup in iwl_connection_init_rx_config()
+ * since we currently do not support programming multicast
+ * filters into the device.
+ */
*total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 7e5a5ba..31775bd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -343,6 +343,8 @@
int iwl_full_rxon_required(struct iwl_priv *priv);
void iwl_set_rxon_chain(struct iwl_priv *priv);
int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch);
+u8 iwl_get_single_channel_number(struct iwl_priv *priv,
+ enum ieee80211_band band);
void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf);
u8 iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
struct ieee80211_sta_ht_cap *sta_ht_inf);
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 5d3f51f..386c5f9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -491,6 +491,7 @@
mutex_lock(&priv->mutex);
+ cancel_delayed_work_sync(&priv->scan_check);
set_bit(STATUS_SCAN_ABORTING, &priv->status);
iwl_send_scan_abort(priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 83a2636..c27c13f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -1373,10 +1373,14 @@
IWL_DEBUG_INFO(priv, "received request to remove station %pM\n",
sta->addr);
+ mutex_lock(&priv->mutex);
+ IWL_DEBUG_INFO(priv, "proceeding to remove station %pM\n",
+ sta->addr);
ret = iwl_remove_station(priv, sta_common->sta_id, sta->addr);
if (ret)
IWL_ERR(priv, "Error removing station %pM\n",
sta->addr);
+ mutex_unlock(&priv->mutex);
return ret;
}
EXPORT_SYMBOL(iwl_mac_sta_remove);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.h b/drivers/net/wireless/iwlwifi/iwl-sta.h
index c2a453a..dc43ebd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.h
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.h
@@ -97,6 +97,17 @@
spin_lock_irqsave(&priv->sta_lock, flags);
memset(priv->stations, 0, sizeof(priv->stations));
priv->num_stations = 0;
+
+ /*
+ * Remove all key information that is not stored as part of station
+ * information since mac80211 may not have had a
+ * chance to remove all the keys. When device is reconfigured by
+ * mac80211 after an error all keys will be reconfigured.
+ */
+ priv->ucode_key_table = 0;
+ priv->key_mapping_key = 0;
+ memset(priv->wep_keys, 0, sizeof(priv->wep_keys));
+
spin_unlock_irqrestore(&priv->sta_lock, flags);
}
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 3e5bffb..a27872d 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -1844,6 +1844,49 @@
#endif
}
+static int iwl3945_get_single_channel_for_scan(struct iwl_priv *priv,
+ struct ieee80211_vif *vif,
+ enum ieee80211_band band,
+ struct iwl3945_scan_channel *scan_ch)
+{
+ const struct ieee80211_supported_band *sband;
+ u16 passive_dwell = 0;
+ u16 active_dwell = 0;
+ int added = 0;
+ u8 channel = 0;
+
+ sband = iwl_get_hw_mode(priv, band);
+ if (!sband) {
+ IWL_ERR(priv, "invalid band\n");
+ return added;
+ }
+
+ active_dwell = iwl_get_active_dwell_time(priv, band, 0);
+ passive_dwell = iwl_get_passive_dwell_time(priv, band, vif);
+
+ if (passive_dwell <= active_dwell)
+ passive_dwell = active_dwell + 1;
+
+
+ channel = iwl_get_single_channel_number(priv, band);
+
+ if (channel) {
+ scan_ch->channel = channel;
+ scan_ch->type = 0; /* passive */
+ scan_ch->active_dwell = cpu_to_le16(active_dwell);
+ scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+ /* Set txpower levels to defaults */
+ scan_ch->tpc.dsp_atten = 110;
+ if (band == IEEE80211_BAND_5GHZ)
+ scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
+ else
+ scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
+ added++;
+ } else
+ IWL_ERR(priv, "no valid channel found\n");
+ return added;
+}
+
static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
enum ieee80211_band band,
u8 is_active, u8 n_probes,
@@ -2992,9 +3035,16 @@
/* select Rx antennas */
scan->flags |= iwl3945_get_antenna_flags(priv);
- scan->channel_count =
- iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
- (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif);
+ if (priv->is_internal_short_scan) {
+ scan->channel_count =
+ iwl3945_get_single_channel_for_scan(priv, vif, band,
+ (void *)&scan->data[le16_to_cpu(
+ scan->tx_cmd.len)]);
+ } else {
+ scan->channel_count =
+ iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
+ (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif);
+ }
if (scan->channel_count == 0) {
IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
@@ -3387,10 +3437,13 @@
bool is_ap = vif->type == NL80211_IFTYPE_STATION;
u8 sta_id;
- sta_priv->common.sta_id = IWL_INVALID_STATION;
-
IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
sta->addr);
+ mutex_lock(&priv->mutex);
+ IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n",
+ sta->addr);
+ sta_priv->common.sta_id = IWL_INVALID_STATION;
+
ret = iwl_add_station_common(priv, sta->addr, is_ap, &sta->ht_cap,
&sta_id);
@@ -3398,6 +3451,7 @@
IWL_ERR(priv, "Unable to add station %pM (%d)\n",
sta->addr, ret);
/* Should we return success if return code is EEXIST ? */
+ mutex_unlock(&priv->mutex);
return ret;
}
@@ -3407,6 +3461,7 @@
IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
sta->addr);
iwl3945_rs_rate_init(priv, sta, sta_id);
+ mutex_unlock(&priv->mutex);
return 0;
}
diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c
index a115bfa..7a377f5 100644
--- a/drivers/net/wireless/libertas/rx.c
+++ b/drivers/net/wireless/libertas/rx.c
@@ -329,9 +329,8 @@
/* create the exported radio header */
/* radiotap header */
- radiotap_hdr.hdr.it_version = 0;
- /* XXX must check this value for pad */
- radiotap_hdr.hdr.it_pad = 0;
+ memset(&radiotap_hdr, 0, sizeof(radiotap_hdr));
+ /* XXX must check radiotap_hdr.hdr.it_pad for pad */
radiotap_hdr.hdr.it_len = cpu_to_le16 (sizeof(struct rx_radiotap_hdr));
radiotap_hdr.hdr.it_present = cpu_to_le32 (RX_RADIOTAP_PRESENT);
radiotap_hdr.rate = convert_mv_rate_to_radiotap(prxpd->rx_rate);
diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c
index 6a04c21..817fffc 100644
--- a/drivers/net/wireless/libertas_tf/main.c
+++ b/drivers/net/wireless/libertas_tf/main.c
@@ -549,7 +549,7 @@
prxpd = (struct rxpd *) skb->data;
- stats.flag = 0;
+ memset(&stats, 0, sizeof(stats));
if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK)))
stats.flag |= RX_FLAG_FAILED_FCS_CRC;
stats.freq = priv->cur_freq;
diff --git a/drivers/net/wireless/orinoco/airport.c b/drivers/net/wireless/orinoco/airport.c
index 9bcee10..4a0a0e5 100644
--- a/drivers/net/wireless/orinoco/airport.c
+++ b/drivers/net/wireless/orinoco/airport.c
@@ -239,8 +239,11 @@
MODULE_DEVICE_TABLE(of, airport_match);
static struct macio_driver airport_driver = {
- .name = DRIVER_NAME,
- .match_table = airport_match,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = airport_match,
+ },
.probe = airport_attach,
.remove = airport_detach,
.suspend = airport_suspend,
diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index 07c4528..a5ea89c 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -41,6 +41,8 @@
{ PCI_DEVICE(0x1260, 0x3877) },
/* Intersil PRISM Javelin/Xbow Wireless LAN adapter */
{ PCI_DEVICE(0x1260, 0x3886) },
+ /* Intersil PRISM Xbow Wireless LAN adapter (Symbol AP-300) */
+ { PCI_DEVICE(0x1260, 0xffff) },
{ },
};
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index d5b197b..7307325 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -80,6 +80,7 @@
{USB_DEVICE(0x1413, 0x5400)}, /* Telsey 802.11g USB2.0 Adapter */
{USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */
{USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */
+ {USB_DEVICE(0x413c, 0x5513)}, /* Dell WLA3310 USB Wireless Adapter */
{USB_DEVICE(0x413c, 0x8102)}, /* Spinnaker DUT */
{USB_DEVICE(0x413c, 0x8104)}, /* Cohiba Proto board */
{}
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 6991613..0f8b84b 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -413,7 +413,7 @@
*/
rt2x00_desc_read(txi, 0, &word);
rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN,
- skb->len - TXINFO_DESC_SIZE);
+ skb->len + TXWI_DESC_SIZE);
rt2x00_set_field32(&word, TXINFO_W0_WIV,
!test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2);
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 3ae468c..f20d3ee 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -854,6 +854,11 @@
BIT(NL80211_IFTYPE_WDS);
/*
+ * Initialize configuration work.
+ */
+ INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
+
+ /*
* Let the driver probe the device to detect the capabilities.
*/
retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev);
@@ -863,11 +868,6 @@
}
/*
- * Initialize configuration work.
- */
- INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
-
- /*
* Allocate queue array.
*/
retval = rt2x00queue_allocate(rt2x00dev);
diff --git a/drivers/net/wireless/wl12xx/wl1251_sdio.c b/drivers/net/wireless/wl12xx/wl1251_sdio.c
index d234285..c561332 100644
--- a/drivers/net/wireless/wl12xx/wl1251_sdio.c
+++ b/drivers/net/wireless/wl12xx/wl1251_sdio.c
@@ -259,6 +259,7 @@
sdio_disable_func(func);
release:
sdio_release_host(func);
+ wl1251_free_hw(wl);
return ret;
}
diff --git a/drivers/parport/parport_amiga.c b/drivers/parport/parport_amiga.c
index 1586e1c..8bef6d6 100644
--- a/drivers/parport/parport_amiga.c
+++ b/drivers/parport/parport_amiga.c
@@ -18,6 +18,8 @@
#include <linux/parport.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
#include <asm/setup.h>
#include <asm/amigahw.h>
#include <asm/irq.h>
@@ -31,7 +33,6 @@
#define DPRINTK(x...) do { } while (0)
#endif
-static struct parport *this_port = NULL;
static void amiga_write_data(struct parport *p, unsigned char data)
{
@@ -227,18 +228,11 @@
/* ----------- Initialisation code --------------------------------- */
-static int __init parport_amiga_init(void)
+static int __init amiga_parallel_probe(struct platform_device *pdev)
{
struct parport *p;
int err;
- if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_PARALLEL))
- return -ENODEV;
-
- err = -EBUSY;
- if (!request_mem_region(CIAA_PHYSADDR-1+0x100, 0x100, "parallel"))
- goto out_mem;
-
ciaa.ddrb = 0xff;
ciab.ddra &= 0xf8;
mb();
@@ -246,41 +240,63 @@
p = parport_register_port((unsigned long)&ciaa.prb, IRQ_AMIGA_CIAA_FLG,
PARPORT_DMA_NONE, &pp_amiga_ops);
if (!p)
- goto out_port;
+ return -EBUSY;
- err = request_irq(IRQ_AMIGA_CIAA_FLG, parport_irq_handler, 0, p->name, p);
+ err = request_irq(IRQ_AMIGA_CIAA_FLG, parport_irq_handler, 0, p->name,
+ p);
if (err)
goto out_irq;
- this_port = p;
printk(KERN_INFO "%s: Amiga built-in port using irq\n", p->name);
/* XXX: set operating mode */
parport_announce_port(p);
+ platform_set_drvdata(pdev, p);
+
return 0;
out_irq:
parport_put_port(p);
-out_port:
- release_mem_region(CIAA_PHYSADDR-1+0x100, 0x100);
-out_mem:
return err;
}
-static void __exit parport_amiga_exit(void)
+static int __exit amiga_parallel_remove(struct platform_device *pdev)
{
- parport_remove_port(this_port);
- if (this_port->irq != PARPORT_IRQ_NONE)
- free_irq(IRQ_AMIGA_CIAA_FLG, this_port);
- parport_put_port(this_port);
- release_mem_region(CIAA_PHYSADDR-1+0x100, 0x100);
+ struct parport *port = platform_get_drvdata(pdev);
+
+ parport_remove_port(port);
+ if (port->irq != PARPORT_IRQ_NONE)
+ free_irq(IRQ_AMIGA_CIAA_FLG, port);
+ parport_put_port(port);
+ platform_set_drvdata(pdev, NULL);
+ return 0;
}
+static struct platform_driver amiga_parallel_driver = {
+ .remove = __exit_p(amiga_parallel_remove),
+ .driver = {
+ .name = "amiga-parallel",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init amiga_parallel_init(void)
+{
+ return platform_driver_probe(&amiga_parallel_driver,
+ amiga_parallel_probe);
+}
+
+module_init(amiga_parallel_init);
+
+static void __exit amiga_parallel_exit(void)
+{
+ platform_driver_unregister(&amiga_parallel_driver);
+}
+
+module_exit(amiga_parallel_exit);
MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
MODULE_DESCRIPTION("Parport Driver for Amiga builtin Port");
MODULE_SUPPORTED_DEVICE("Amiga builtin Parallel Port");
MODULE_LICENSE("GPL");
-
-module_init(parport_amiga_init)
-module_exit(parport_amiga_exit)
+MODULE_ALIAS("platform:amiga-parallel");
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index b3e5580..4952c3b 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -828,7 +828,14 @@
pci_name(pdev), err);
return err;
}
+
bus = pdev->subordinate;
+ if (!bus) {
+ dev_notice(&pdev->dev, "the device is not a bridge, "
+ "skipping\n");
+ rc = -ENODEV;
+ goto err_disable_device;
+ }
/* Need to read VID early b/c it's used to differentiate CPQ and INTC
* discovery
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 796828f..c9171be 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -340,7 +340,7 @@
int dmar_disabled = 1;
#endif /*CONFIG_DMAR_DEFAULT_ON*/
-static int __initdata dmar_map_gfx = 1;
+static int dmar_map_gfx = 1;
static int dmar_forcedac;
static int intel_iommu_strict;
@@ -1874,14 +1874,15 @@
}
}
if (found) {
+ spin_unlock_irqrestore(&device_domain_lock, flags);
free_devinfo_mem(info);
domain_exit(domain);
domain = found;
} else {
list_add(&info->link, &domain->devices);
list_add(&info->global, &device_domain_list);
+ spin_unlock_irqrestore(&device_domain_lock, flags);
}
- spin_unlock_irqrestore(&device_domain_lock, flags);
}
found_domain:
@@ -3603,7 +3604,8 @@
pte = dmar_domain->pgd;
if (dma_pte_present(pte)) {
free_pgtable_page(dmar_domain->pgd);
- dmar_domain->pgd = (struct dma_pte *)dma_pte_addr(pte);
+ dmar_domain->pgd = (struct dma_pte *)
+ phys_to_virt(dma_pte_addr(pte));
}
dmar_domain->agaw--;
}
@@ -3719,6 +3721,12 @@
*/
printk(KERN_INFO "DMAR: Forcing write-buffer flush capability\n");
rwbf_quirk = 1;
+
+ /* https://bugzilla.redhat.com/show_bug.cgi?id=538163 */
+ if (dev->revision == 0x07) {
+ printk(KERN_INFO "DMAR: Disabling IOMMU for graphics on this chipset\n");
+ dmar_map_gfx = 0;
+ }
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index afd2fbf..c9957f6 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -1035,39 +1035,6 @@
return retval;
}
-static void pci_remove_slot_links(struct pci_dev *dev)
-{
- char func[10];
- struct pci_slot *slot;
-
- sysfs_remove_link(&dev->dev.kobj, "slot");
- list_for_each_entry(slot, &dev->bus->slots, list) {
- if (slot->number != PCI_SLOT(dev->devfn))
- continue;
- snprintf(func, 10, "function%d", PCI_FUNC(dev->devfn));
- sysfs_remove_link(&slot->kobj, func);
- }
-}
-
-static int pci_create_slot_links(struct pci_dev *dev)
-{
- int result = 0;
- char func[10];
- struct pci_slot *slot;
-
- list_for_each_entry(slot, &dev->bus->slots, list) {
- if (slot->number != PCI_SLOT(dev->devfn))
- continue;
- result = sysfs_create_link(&dev->dev.kobj, &slot->kobj, "slot");
- if (result)
- goto out;
- snprintf(func, 10, "function%d", PCI_FUNC(dev->devfn));
- result = sysfs_create_link(&slot->kobj, &dev->dev.kobj, func);
- }
-out:
- return result;
-}
-
int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev)
{
int retval;
@@ -1130,8 +1097,6 @@
if (retval)
goto err_vga_file;
- pci_create_slot_links(pdev);
-
return 0;
err_vga_file:
@@ -1181,8 +1146,6 @@
if (!sysfs_initialized)
return;
- pci_remove_slot_links(pdev);
-
pci_remove_capabilities_sysfs(pdev);
if (pdev->cfg_size < PCI_CFG_SPACE_EXP_SIZE)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 60f30e7..740fb4e 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2292,6 +2292,7 @@
pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
}
}
+EXPORT_SYMBOL_GPL(pci_msi_off);
#ifndef HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE
int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h
index 7aaae2d..80c11d1 100644
--- a/drivers/pci/pcie/aer/aerdrv.h
+++ b/drivers/pci/pcie/aer/aerdrv.h
@@ -130,4 +130,21 @@
}
#endif
+#ifdef CONFIG_ACPI_APEI
+extern int pcie_aer_get_firmware_first(struct pci_dev *pci_dev);
+#else
+static inline int pcie_aer_get_firmware_first(struct pci_dev *pci_dev)
+{
+ if (pci_dev->__aer_firmware_first_valid)
+ return pci_dev->__aer_firmware_first;
+ return 0;
+}
+#endif
+
+static inline void pcie_aer_force_firmware_first(struct pci_dev *pci_dev,
+ int enable)
+{
+ pci_dev->__aer_firmware_first = !!enable;
+ pci_dev->__aer_firmware_first_valid = 1;
+}
#endif /* _AERDRV_H_ */
diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c
index 0481408..f278d7b 100644
--- a/drivers/pci/pcie/aer/aerdrv_acpi.c
+++ b/drivers/pci/pcie/aer/aerdrv_acpi.c
@@ -16,6 +16,7 @@
#include <linux/acpi.h>
#include <linux/pci-acpi.h>
#include <linux/delay.h>
+#include <acpi/apei.h>
#include "aerdrv.h"
/**
@@ -53,3 +54,79 @@
return 0;
}
+
+#ifdef CONFIG_ACPI_APEI
+static inline int hest_match_pci(struct acpi_hest_aer_common *p,
+ struct pci_dev *pci)
+{
+ return (0 == pci_domain_nr(pci->bus) &&
+ p->bus == pci->bus->number &&
+ p->device == PCI_SLOT(pci->devfn) &&
+ p->function == PCI_FUNC(pci->devfn));
+}
+
+struct aer_hest_parse_info {
+ struct pci_dev *pci_dev;
+ int firmware_first;
+};
+
+static int aer_hest_parse(struct acpi_hest_header *hest_hdr, void *data)
+{
+ struct aer_hest_parse_info *info = data;
+ struct acpi_hest_aer_common *p;
+ u8 pcie_type = 0;
+ u8 bridge = 0;
+ int ff = 0;
+
+ switch (hest_hdr->type) {
+ case ACPI_HEST_TYPE_AER_ROOT_PORT:
+ pcie_type = PCI_EXP_TYPE_ROOT_PORT;
+ break;
+ case ACPI_HEST_TYPE_AER_ENDPOINT:
+ pcie_type = PCI_EXP_TYPE_ENDPOINT;
+ break;
+ case ACPI_HEST_TYPE_AER_BRIDGE:
+ if ((info->pci_dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
+ bridge = 1;
+ break;
+ default:
+ return 0;
+ }
+
+ p = (struct acpi_hest_aer_common *)(hest_hdr + 1);
+ if (p->flags & ACPI_HEST_GLOBAL) {
+ if ((info->pci_dev->is_pcie &&
+ info->pci_dev->pcie_type == pcie_type) || bridge)
+ ff = !!(p->flags & ACPI_HEST_FIRMWARE_FIRST);
+ } else
+ if (hest_match_pci(p, info->pci_dev))
+ ff = !!(p->flags & ACPI_HEST_FIRMWARE_FIRST);
+ info->firmware_first = ff;
+
+ return 0;
+}
+
+static void aer_set_firmware_first(struct pci_dev *pci_dev)
+{
+ int rc;
+ struct aer_hest_parse_info info = {
+ .pci_dev = pci_dev,
+ .firmware_first = 0,
+ };
+
+ rc = apei_hest_parse(aer_hest_parse, &info);
+
+ if (rc)
+ pci_dev->__aer_firmware_first = 0;
+ else
+ pci_dev->__aer_firmware_first = info.firmware_first;
+ pci_dev->__aer_firmware_first_valid = 1;
+}
+
+int pcie_aer_get_firmware_first(struct pci_dev *dev)
+{
+ if (!dev->__aer_firmware_first_valid)
+ aer_set_firmware_first(dev);
+ return dev->__aer_firmware_first;
+}
+#endif
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index df2d686..8af4f61 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -36,7 +36,7 @@
u16 reg16 = 0;
int pos;
- if (dev->aer_firmware_first)
+ if (pcie_aer_get_firmware_first(dev))
return -EIO;
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
@@ -63,7 +63,7 @@
u16 reg16 = 0;
int pos;
- if (dev->aer_firmware_first)
+ if (pcie_aer_get_firmware_first(dev))
return -EIO;
pos = pci_pcie_cap(dev);
@@ -771,7 +771,7 @@
*/
int aer_init(struct pcie_device *dev)
{
- if (dev->port->aer_firmware_first) {
+ if (pcie_aer_get_firmware_first(dev->port)) {
dev_printk(KERN_DEBUG, &dev->device,
"PCIe errors handled by platform firmware.\n");
goto out;
@@ -785,7 +785,7 @@
if (forceload) {
dev_printk(KERN_DEBUG, &dev->device,
"aerdrv forceload requested.\n");
- dev->port->aer_firmware_first = 0;
+ pcie_aer_force_firmware_first(dev->port, 0);
return 0;
}
return -ENXIO;
diff --git a/drivers/pci/pcie/pme/pcie_pme.c b/drivers/pci/pcie/pme/pcie_pme.c
index aac285a..d672a0a 100644
--- a/drivers/pci/pcie/pme/pcie_pme.c
+++ b/drivers/pci/pcie/pme/pcie_pme.c
@@ -34,7 +34,7 @@
* being registered. Consequently, the interrupt-based PCIe PME signaling will
* not be used by any PCIe root ports in that case.
*/
-static bool pcie_pme_disabled;
+static bool pcie_pme_disabled = true;
/*
* The PCI Express Base Specification 2.0, Section 6.1.8, states the following:
@@ -64,12 +64,19 @@
static int __init pcie_pme_setup(char *str)
{
- if (!strcmp(str, "off"))
- pcie_pme_disabled = true;
- else if (!strcmp(str, "force"))
+ if (!strncmp(str, "auto", 4))
+ pcie_pme_disabled = false;
+ else if (!strncmp(str, "force", 5))
pcie_pme_force_enable = true;
- else if (!strcmp(str, "nomsi"))
- pcie_pme_msi_disabled = true;
+
+ str = strchr(str, ',');
+ if (str) {
+ str++;
+ str += strspn(str, " \t");
+ if (*str && !strcmp(str, "nomsi"))
+ pcie_pme_msi_disabled = true;
+ }
+
return 1;
}
__setup("pcie_pme=", pcie_pme_setup);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index c82548a..f4adba2 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -10,7 +10,6 @@
#include <linux/module.h>
#include <linux/cpumask.h>
#include <linux/pci-aspm.h>
-#include <acpi/acpi_hest.h>
#include "pci.h"
#define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */
@@ -904,12 +903,6 @@
pdev->is_hotplug_bridge = 1;
}
-static void set_pci_aer_firmware_first(struct pci_dev *pdev)
-{
- if (acpi_hest_firmware_first_pci(pdev))
- pdev->aer_firmware_first = 1;
-}
-
#define LEGACY_IO_RESOURCE (IORESOURCE_IO | IORESOURCE_PCI_FIXED)
/**
@@ -939,7 +932,6 @@
dev->multifunction = !!(hdr_type & 0x80);
dev->error_state = pci_channel_io_normal;
set_pcie_port_type(dev);
- set_pci_aer_firmware_first(dev);
list_for_each_entry(slot, &dev->bus->slots, list)
if (PCI_SLOT(dev->devfn) == slot->number)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index b7512cf..477345d 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1457,7 +1457,8 @@
conf5 &= ~(1 << 24); /* Clear bit 24 */
switch (pdev->device) {
- case PCI_DEVICE_ID_JMICRON_JMB360:
+ case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */
+ case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */
/* The controller should be in single function ahci mode */
conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */
break;
@@ -1493,12 +1494,14 @@
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 17bed18..2aaa131 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -97,16 +97,16 @@
root = pci_find_parent_resource(dev, res);
if (!root) {
- dev_err(&dev->dev, "no compatible bridge window for %pR\n",
- res);
+ dev_info(&dev->dev, "no compatible bridge window for %pR\n",
+ res);
return -EINVAL;
}
conflict = request_resource_conflict(root, res);
if (conflict) {
- dev_err(&dev->dev,
- "address space collision: %pR conflicts with %s %pR\n",
- res, conflict->name, conflict);
+ dev_info(&dev->dev,
+ "address space collision: %pR conflicts with %s %pR\n",
+ res, conflict->name, conflict);
return -EBUSY;
}
@@ -156,6 +156,38 @@
pcibios_align_resource, dev);
}
+ if (ret < 0 && dev->fw_addr[resno]) {
+ struct resource *root, *conflict;
+ resource_size_t start, end;
+
+ /*
+ * If we failed to assign anything, let's try the address
+ * where firmware left it. That at least has a chance of
+ * working, which is better than just leaving it disabled.
+ */
+
+ if (res->flags & IORESOURCE_IO)
+ root = &ioport_resource;
+ else
+ root = &iomem_resource;
+
+ start = res->start;
+ end = res->end;
+ res->start = dev->fw_addr[resno];
+ res->end = res->start + size - 1;
+ dev_info(&dev->dev, "BAR %d: trying firmware assignment %pR\n",
+ resno, res);
+ conflict = request_resource_conflict(root, res);
+ if (conflict) {
+ dev_info(&dev->dev,
+ "BAR %d: %pR conflicts with %s %pR\n", resno,
+ res, conflict->name, conflict);
+ res->start = start;
+ res->end = end;
+ } else
+ ret = 0;
+ }
+
if (!ret) {
res->flags &= ~IORESOURCE_STARTALIGN;
dev_info(&dev->dev, "BAR %d: assigned %pR\n", resno, res);
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index e0189cf..659eaa0 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -97,50 +97,6 @@
return bus_speed_read(slot->bus->cur_bus_speed, buf);
}
-static void remove_sysfs_files(struct pci_slot *slot)
-{
- char func[10];
- struct list_head *tmp;
-
- list_for_each(tmp, &slot->bus->devices) {
- struct pci_dev *dev = pci_dev_b(tmp);
- if (PCI_SLOT(dev->devfn) != slot->number)
- continue;
- sysfs_remove_link(&dev->dev.kobj, "slot");
-
- snprintf(func, 10, "function%d", PCI_FUNC(dev->devfn));
- sysfs_remove_link(&slot->kobj, func);
- }
-}
-
-static int create_sysfs_files(struct pci_slot *slot)
-{
- int result;
- char func[10];
- struct list_head *tmp;
-
- list_for_each(tmp, &slot->bus->devices) {
- struct pci_dev *dev = pci_dev_b(tmp);
- if (PCI_SLOT(dev->devfn) != slot->number)
- continue;
-
- result = sysfs_create_link(&dev->dev.kobj, &slot->kobj, "slot");
- if (result)
- goto fail;
-
- snprintf(func, 10, "function%d", PCI_FUNC(dev->devfn));
- result = sysfs_create_link(&slot->kobj, &dev->dev.kobj, func);
- if (result)
- goto fail;
- }
-
- return 0;
-
-fail:
- remove_sysfs_files(slot);
- return result;
-}
-
static void pci_slot_release(struct kobject *kobj)
{
struct pci_dev *dev;
@@ -153,8 +109,6 @@
if (PCI_SLOT(dev->devfn) == slot->number)
dev->slot = NULL;
- remove_sysfs_files(slot);
-
list_del(&slot->list);
kfree(slot);
@@ -346,8 +300,6 @@
INIT_LIST_HEAD(&slot->list);
list_add(&slot->list, &parent->slots);
- create_sysfs_files(slot);
-
list_for_each_entry(dev, &parent->devices, bus_list)
if (PCI_SLOT(dev->devfn) == slot_nr)
dev->slot = slot;
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 7ef7ade..eac9614 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -671,6 +671,7 @@
if (old_funcs != new_funcs) {
/* we need to re-start */
pcmcia_card_remove(s, NULL);
+ s->functions = 0;
pcmcia_card_add(s);
}
}
@@ -1355,6 +1356,7 @@
INIT_LIST_HEAD(&socket->devices_list);
memset(&socket->pcmcia_state, 0, sizeof(u8));
socket->device_count = 0;
+ atomic_set(&socket->present, 0);
ret = pccard_register_pcmcia(socket, &pcmcia_bus_callback);
if (ret) {
@@ -1363,8 +1365,6 @@
return ret;
}
- atomic_set(&socket->present, 0);
-
return 0;
}
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index 1a648b9..25e5e30 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -1157,7 +1157,7 @@
unsigned int i, m, hwirq;
pcmconf8xx_t *pcmcia;
int status;
- struct device_node *np = ofdev->node;
+ struct device_node *np = ofdev->dev.of_node;
pcmcia_info("%s\n", version);
@@ -1301,7 +1301,7 @@
.driver = {
.name = driver_name,
.owner = THIS_MODULE,
- .match_table = m8xx_pcmcia_match,
+ .of_match_table = m8xx_pcmcia_match,
},
.probe = m8xx_probe,
.remove = m8xx_remove,
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 29f91fa..a4cd9ad 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -857,8 +857,10 @@
{
pcmcia_release_configuration(p_dev);
pcmcia_release_io(p_dev, &p_dev->io);
- if (p_dev->_irq)
+ if (p_dev->_irq) {
free_irq(p_dev->irq, p_dev->priv);
+ p_dev->_irq = 0;
+ }
if (p_dev->win)
pcmcia_release_window(p_dev, p_dev->win);
}
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 424e576..f1d4137 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -880,6 +880,12 @@
.restore_state = ti_restore_state,
.sock_init = ti_init,
},
+ [CARDBUS_TYPE_ENE] = {
+ .override = ene_override,
+ .save_state = ti_save_state,
+ .restore_state = ti_restore_state,
+ .sock_init = ti_init,
+ },
#endif
#ifdef CONFIG_YENTA_RICOH
[CARDBUS_TYPE_RICOH] = {
@@ -902,14 +908,6 @@
.restore_state = o2micro_restore_state,
},
#endif
-#ifdef CONFIG_YENTA_TI
- [CARDBUS_TYPE_ENE] = {
- .override = ene_override,
- .save_state = ti_save_state,
- .restore_state = ti_restore_state,
- .sock_init = ti_init,
- },
-#endif
};
@@ -975,7 +973,7 @@
/* probes the PCI interrupt, use only on override functions */
static int yenta_probe_cb_irq(struct yenta_socket *socket)
{
- u8 reg;
+ u8 reg = 0;
if (!socket->cb_irq)
return -1;
@@ -989,7 +987,8 @@
}
/* generate interrupt, wait */
- reg = exca_readb(socket, I365_CSCINT);
+ if (!socket->dev->irq)
+ reg = exca_readb(socket, I365_CSCINT);
exca_writeb(socket, I365_CSCINT, reg | I365_CSC_STSCHG);
cb_writel(socket, CB_SOCKET_EVENT, -1);
cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 576c3ed..bb2f1fb 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -489,7 +489,7 @@
mutex_unlock(&ipclock);
return -ENODEV;
}
- ipc_command(cmd << 12 | sub);
+ ipc_command(sub << 12 | cmd);
err = busy_loop();
mutex_unlock(&ipclock);
return err;
@@ -501,9 +501,9 @@
* @cmd: command
* @sub: sub type
* @in: input data
- * @inlen: input length
+ * @inlen: input length in dwords
* @out: output data
- * @outlein: output length
+ * @outlein: output length in dwords
*
* Issue a command to the SCU which involves data transfers. Do the
* data copies under the lock but leave it for the caller to interpret
@@ -524,7 +524,7 @@
for (i = 0; i < inlen; i++)
ipc_data_writel(*in++, 4 * i);
- ipc_command(cmd << 12 | sub);
+ ipc_command((sub << 12) | cmd | (inlen << 18));
err = busy_loop();
for (i = 0; i < outlen; i++)
@@ -556,6 +556,10 @@
u32 cmd = 0;
mutex_lock(&ipclock);
+ if (ipcdev.pdev == NULL) {
+ mutex_unlock(&ipclock);
+ return -ENODEV;
+ }
cmd = (addr >> 24) & 0xFF;
if (cmd == IPC_I2C_READ) {
writel(addr, ipcdev.i2c_base + IPC_I2C_CNTRL_ADDR);
diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c
index d762a0c..2afbeec 100644
--- a/drivers/power/ds2782_battery.c
+++ b/drivers/power/ds2782_battery.c
@@ -163,7 +163,7 @@
if (err)
return err;
*capacity = raw;
- return raw;
+ return 0;
}
static int ds2786_get_current(struct ds278x_info *info, int *current_uA)
diff --git a/drivers/power/max17040_battery.c b/drivers/power/max17040_battery.c
index f3e22c9..2f2f9a6 100644
--- a/drivers/power/max17040_battery.c
+++ b/drivers/power/max17040_battery.c
@@ -225,7 +225,6 @@
ret = power_supply_register(&client->dev, &chip->battery);
if (ret) {
dev_err(&client->dev, "failed: power supply register\n");
- i2c_set_clientdata(client, NULL);
kfree(chip);
return ret;
}
@@ -245,7 +244,6 @@
power_supply_unregister(&chip->battery);
cancel_delayed_work(&chip->work);
- i2c_set_clientdata(client, NULL);
kfree(chip);
return 0;
}
diff --git a/drivers/power/z2_battery.c b/drivers/power/z2_battery.c
index 9cca465..85064a9 100644
--- a/drivers/power/z2_battery.c
+++ b/drivers/power/z2_battery.c
@@ -9,19 +9,13 @@
*
*/
-#include <linux/init.h>
-#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/power_supply.h>
-#include <linux/i2c.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
#include <linux/gpio.h>
+#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
#include <linux/z2_battery.h>
#define Z2_DEFAULT_NAME "Z2"
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index c32822a..070211a 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -8,3 +8,27 @@
---help---
Amount of time a discovery node waits for a host to complete
enumeration before giving up.
+
+config RAPIDIO_ENABLE_RX_TX_PORTS
+ bool "Enable RapidIO Input/Output Ports"
+ depends on RAPIDIO
+ ---help---
+ The RapidIO specification describes a Output port transmit
+ enable and a Input port receive enable. The recommended state
+ for Input ports and Output ports should be disabled. When
+ this switch is set the RapidIO subsystem will enable all
+ ports for Input/Output direction to allow other traffic
+ than Maintenance transfers.
+
+source "drivers/rapidio/switches/Kconfig"
+
+config RAPIDIO_DEBUG
+ bool "RapidIO subsystem debug messages"
+ depends on RAPIDIO
+ help
+ Say Y here if you want the RapidIO subsystem to produce a bunch of
+ debug messages to the system log. Select this if you are having a
+ problem with the RapidIO subsystem and want to see more of what is
+ going on.
+
+ If you are unsure about this, say N here.
diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile
index 7c0e181..b6139fe 100644
--- a/drivers/rapidio/Makefile
+++ b/drivers/rapidio/Makefile
@@ -4,3 +4,7 @@
obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o
obj-$(CONFIG_RAPIDIO) += switches/
+
+ifeq ($(CONFIG_RAPIDIO_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 4541509..8070e07 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -4,6 +4,14 @@
* Copyright 2005 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ * - Added Port-Write/Error Management initialization and handling
+ *
+ * Copyright 2009 Sysgo AG
+ * Thomas Moll <thomas.moll@sysgo.com>
+ * - Added Input- Output- enable functionality, to allow full communication
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -31,15 +39,16 @@
LIST_HEAD(rio_devices);
static LIST_HEAD(rio_switches);
-#define RIO_ENUM_CMPL_MAGIC 0xdeadbeef
-
static void rio_enum_timeout(unsigned long);
+static void rio_init_em(struct rio_dev *rdev);
+
DEFINE_SPINLOCK(rio_global_list_lock);
static int next_destid = 0;
static int next_switchid = 0;
static int next_net = 0;
+static int next_comptag;
static struct timer_list rio_enum_timer =
TIMER_INITIALIZER(rio_enum_timeout, 0, 0);
@@ -52,12 +61,6 @@
-1,
};
-static int rio_sport_phys_table[] = {
- RIO_EFB_PAR_EP_FREE_ID,
- RIO_EFB_SER_EP_FREE_ID,
- -1,
-};
-
/**
* rio_get_device_id - Get the base/extended device id for a device
* @port: RIO master port
@@ -118,12 +121,26 @@
u32 result;
int ret = 0;
- /* Write component tag CSR magic complete value */
- rio_local_write_config_32(port, RIO_COMPONENT_TAG_CSR,
- RIO_ENUM_CMPL_MAGIC);
- list_for_each_entry(rdev, &rio_devices, global_list)
- rio_write_config_32(rdev, RIO_COMPONENT_TAG_CSR,
- RIO_ENUM_CMPL_MAGIC);
+ /* Assign component tag to all devices */
+ next_comptag = 1;
+ rio_local_write_config_32(port, RIO_COMPONENT_TAG_CSR, next_comptag++);
+
+ list_for_each_entry(rdev, &rio_devices, global_list) {
+ /* Mark device as discovered */
+ rio_read_config_32(rdev,
+ rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR,
+ &result);
+ rio_write_config_32(rdev,
+ rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR,
+ result | RIO_PORT_GEN_DISCOVERED);
+
+ rio_write_config_32(rdev, RIO_COMPONENT_TAG_CSR, next_comptag);
+ rdev->comp_tag = next_comptag++;
+ if (next_comptag >= 0x10000) {
+ pr_err("RIO: Component Tag Counter Overflow\n");
+ break;
+ }
+ }
/* Release host device id locks */
rio_local_write_config_32(port, RIO_HOST_DID_LOCK_CSR,
@@ -229,27 +246,37 @@
}
/**
- * rio_route_set_ops- Sets routing operations for a particular vendor switch
+ * rio_switch_init - Sets switch operations for a particular vendor switch
* @rdev: RIO device
+ * @do_enum: Enumeration/Discovery mode flag
*
- * Searches the RIO route ops table for known switch types. If the vid
- * and did match a switch table entry, then set the add_entry() and
- * get_entry() ops to the table entry values.
+ * Searches the RIO switch ops table for known switch types. If the vid
+ * and did match a switch table entry, then call switch initialization
+ * routine to setup switch-specific routines.
*/
-static void rio_route_set_ops(struct rio_dev *rdev)
+static void rio_switch_init(struct rio_dev *rdev, int do_enum)
{
- struct rio_route_ops *cur = __start_rio_route_ops;
- struct rio_route_ops *end = __end_rio_route_ops;
+ struct rio_switch_ops *cur = __start_rio_switch_ops;
+ struct rio_switch_ops *end = __end_rio_switch_ops;
while (cur < end) {
if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) {
- pr_debug("RIO: adding routing ops for %s\n", rio_name(rdev));
- rdev->rswitch->add_entry = cur->add_hook;
- rdev->rswitch->get_entry = cur->get_hook;
+ pr_debug("RIO: calling init routine for %s\n",
+ rio_name(rdev));
+ cur->init_hook(rdev, do_enum);
+ break;
}
cur++;
}
+ if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) {
+ pr_debug("RIO: adding STD routing ops for %s\n",
+ rio_name(rdev));
+ rdev->rswitch->add_entry = rio_std_route_add_entry;
+ rdev->rswitch->get_entry = rio_std_route_get_entry;
+ rdev->rswitch->clr_table = rio_std_route_clr_table;
+ }
+
if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry)
printk(KERN_ERR "RIO: missing routing ops for %s\n",
rio_name(rdev));
@@ -281,6 +308,65 @@
}
/**
+ * rio_enable_rx_tx_port - enable input reciever and output transmitter of
+ * given port
+ * @port: Master port associated with the RIO network
+ * @local: local=1 select local port otherwise a far device is reached
+ * @destid: Destination ID of the device to check host bit
+ * @hopcount: Number of hops to reach the target
+ * @port_num: Port (-number on switch) to enable on a far end device
+ *
+ * Returns 0 or 1 from on General Control Command and Status Register
+ * (EXT_PTR+0x3C)
+ */
+inline int rio_enable_rx_tx_port(struct rio_mport *port,
+ int local, u16 destid,
+ u8 hopcount, u8 port_num) {
+#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS
+ u32 regval;
+ u32 ext_ftr_ptr;
+
+ /*
+ * enable rx input tx output port
+ */
+ pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = "
+ "%d, port_num = %d)\n", local, destid, hopcount, port_num);
+
+ ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount);
+
+ if (local) {
+ rio_local_read_config_32(port, ext_ftr_ptr +
+ RIO_PORT_N_CTL_CSR(0),
+ ®val);
+ } else {
+ if (rio_mport_read_config_32(port, destid, hopcount,
+ ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), ®val) < 0)
+ return -EIO;
+ }
+
+ if (regval & RIO_PORT_N_CTL_P_TYP_SER) {
+ /* serial */
+ regval = regval | RIO_PORT_N_CTL_EN_RX_SER
+ | RIO_PORT_N_CTL_EN_TX_SER;
+ } else {
+ /* parallel */
+ regval = regval | RIO_PORT_N_CTL_EN_RX_PAR
+ | RIO_PORT_N_CTL_EN_TX_PAR;
+ }
+
+ if (local) {
+ rio_local_write_config_32(port, ext_ftr_ptr +
+ RIO_PORT_N_CTL_CSR(0), regval);
+ } else {
+ if (rio_mport_write_config_32(port, destid, hopcount,
+ ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0)
+ return -EIO;
+ }
+#endif
+ return 0;
+}
+
+/**
* rio_setup_device- Allocates and sets up a RIO device
* @net: RIO network
* @port: Master port to send transactions
@@ -325,8 +411,14 @@
rdev->asm_rev = result >> 16;
rio_mport_read_config_32(port, destid, hopcount, RIO_PEF_CAR,
&rdev->pef);
- if (rdev->pef & RIO_PEF_EXT_FEATURES)
+ if (rdev->pef & RIO_PEF_EXT_FEATURES) {
rdev->efptr = result & 0xffff;
+ rdev->phys_efptr = rio_mport_get_physefb(port, 0, destid,
+ hopcount);
+
+ rdev->em_efptr = rio_mport_get_feature(port, 0, destid,
+ hopcount, RIO_EFB_ERR_MGMNT);
+ }
rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR,
&rdev->src_ops);
@@ -349,12 +441,13 @@
if (rio_is_switch(rdev)) {
rio_mport_read_config_32(port, destid, hopcount,
RIO_SWP_INFO_CAR, &rdev->swpinfo);
- rswitch = kmalloc(sizeof(struct rio_switch), GFP_KERNEL);
+ rswitch = kzalloc(sizeof(struct rio_switch), GFP_KERNEL);
if (!rswitch)
goto cleanup;
rswitch->switchid = next_switchid;
rswitch->hopcount = hopcount;
rswitch->destid = destid;
+ rswitch->port_ok = 0;
rswitch->route_table = kzalloc(sizeof(u8)*
RIO_MAX_ROUTE_ENTRIES(port->sys_size),
GFP_KERNEL);
@@ -367,13 +460,22 @@
rdev->rswitch = rswitch;
dev_set_name(&rdev->dev, "%02x:s:%04x", rdev->net->id,
rdev->rswitch->switchid);
- rio_route_set_ops(rdev);
+ rio_switch_init(rdev, do_enum);
+
+ if (do_enum && rdev->rswitch->clr_table)
+ rdev->rswitch->clr_table(port, destid, hopcount,
+ RIO_GLOBAL_TABLE);
list_add_tail(&rswitch->node, &rio_switches);
- } else
+ } else {
+ if (do_enum)
+ /*Enable Input Output Port (transmitter reviever)*/
+ rio_enable_rx_tx_port(port, 0, destid, hopcount, 0);
+
dev_set_name(&rdev->dev, "%02x:e:%04x", rdev->net->id,
rdev->destid);
+ }
rdev->dev.bus = &rio_bus_type;
@@ -414,23 +516,29 @@
*
* Reads the port error status CSR for a particular switch port to
* determine if the port has an active link. Returns
- * %PORT_N_ERR_STS_PORT_OK if the port is active or %0 if it is
+ * %RIO_PORT_N_ERR_STS_PORT_OK if the port is active or %0 if it is
* inactive.
*/
static int
rio_sport_is_active(struct rio_mport *port, u16 destid, u8 hopcount, int sport)
{
- u32 result;
+ u32 result = 0;
u32 ext_ftr_ptr;
- int *entry = rio_sport_phys_table;
+ ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount, 0);
- do {
- if ((ext_ftr_ptr =
- rio_mport_get_feature(port, 0, destid, hopcount, *entry)))
-
+ while (ext_ftr_ptr) {
+ rio_mport_read_config_32(port, destid, hopcount,
+ ext_ftr_ptr, &result);
+ result = RIO_GET_BLOCK_ID(result);
+ if ((result == RIO_EFB_SER_EP_FREE_ID) ||
+ (result == RIO_EFB_SER_EP_FREE_ID_V13P) ||
+ (result == RIO_EFB_SER_EP_FREC_ID))
break;
- } while (*++entry >= 0);
+
+ ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount,
+ ext_ftr_ptr);
+ }
if (ext_ftr_ptr)
rio_mport_read_config_32(port, destid, hopcount,
@@ -438,7 +546,81 @@
RIO_PORT_N_ERR_STS_CSR(sport),
&result);
- return (result & PORT_N_ERR_STS_PORT_OK);
+ return result & RIO_PORT_N_ERR_STS_PORT_OK;
+}
+
+/**
+ * rio_lock_device - Acquires host device lock for specified device
+ * @port: Master port to send transaction
+ * @destid: Destination ID for device/switch
+ * @hopcount: Hopcount to reach switch
+ * @wait_ms: Max wait time in msec (0 = no timeout)
+ *
+ * Attepts to acquire host device lock for specified device
+ * Returns 0 if device lock acquired or EINVAL if timeout expires.
+ */
+static int
+rio_lock_device(struct rio_mport *port, u16 destid, u8 hopcount, int wait_ms)
+{
+ u32 result;
+ int tcnt = 0;
+
+ /* Attempt to acquire device lock */
+ rio_mport_write_config_32(port, destid, hopcount,
+ RIO_HOST_DID_LOCK_CSR, port->host_deviceid);
+ rio_mport_read_config_32(port, destid, hopcount,
+ RIO_HOST_DID_LOCK_CSR, &result);
+
+ while (result != port->host_deviceid) {
+ if (wait_ms != 0 && tcnt == wait_ms) {
+ pr_debug("RIO: timeout when locking device %x:%x\n",
+ destid, hopcount);
+ return -EINVAL;
+ }
+
+ /* Delay a bit */
+ mdelay(1);
+ tcnt++;
+ /* Try to acquire device lock again */
+ rio_mport_write_config_32(port, destid,
+ hopcount,
+ RIO_HOST_DID_LOCK_CSR,
+ port->host_deviceid);
+ rio_mport_read_config_32(port, destid,
+ hopcount,
+ RIO_HOST_DID_LOCK_CSR, &result);
+ }
+
+ return 0;
+}
+
+/**
+ * rio_unlock_device - Releases host device lock for specified device
+ * @port: Master port to send transaction
+ * @destid: Destination ID for device/switch
+ * @hopcount: Hopcount to reach switch
+ *
+ * Returns 0 if device lock released or EINVAL if fails.
+ */
+static int
+rio_unlock_device(struct rio_mport *port, u16 destid, u8 hopcount)
+{
+ u32 result;
+
+ /* Release device lock */
+ rio_mport_write_config_32(port, destid,
+ hopcount,
+ RIO_HOST_DID_LOCK_CSR,
+ port->host_deviceid);
+ rio_mport_read_config_32(port, destid, hopcount,
+ RIO_HOST_DID_LOCK_CSR, &result);
+ if ((result & 0xffff) != 0xffff) {
+ pr_debug("RIO: badness when releasing device lock %x:%x\n",
+ destid, hopcount);
+ return -EINVAL;
+ }
+
+ return 0;
}
/**
@@ -448,6 +630,7 @@
* @table: Routing table ID
* @route_destid: Destination ID to be routed
* @route_port: Port number to be routed
+ * @lock: lock switch device flag
*
* Calls the switch specific add_entry() method to add a route entry
* on a switch. The route table can be specified using the @table
@@ -456,12 +639,26 @@
* %RIO_GLOBAL_TABLE in @table. Returns %0 on success or %-EINVAL
* on failure.
*/
-static int rio_route_add_entry(struct rio_mport *mport, struct rio_switch *rswitch,
- u16 table, u16 route_destid, u8 route_port)
+static int
+rio_route_add_entry(struct rio_mport *mport, struct rio_switch *rswitch,
+ u16 table, u16 route_destid, u8 route_port, int lock)
{
- return rswitch->add_entry(mport, rswitch->destid,
+ int rc;
+
+ if (lock) {
+ rc = rio_lock_device(mport, rswitch->destid,
+ rswitch->hopcount, 1000);
+ if (rc)
+ return rc;
+ }
+
+ rc = rswitch->add_entry(mport, rswitch->destid,
rswitch->hopcount, table,
route_destid, route_port);
+ if (lock)
+ rio_unlock_device(mport, rswitch->destid, rswitch->hopcount);
+
+ return rc;
}
/**
@@ -471,6 +668,7 @@
* @table: Routing table ID
* @route_destid: Destination ID to be routed
* @route_port: Pointer to read port number into
+ * @lock: lock switch device flag
*
* Calls the switch specific get_entry() method to read a route entry
* in a switch. The route table can be specified using the @table
@@ -481,11 +679,24 @@
*/
static int
rio_route_get_entry(struct rio_mport *mport, struct rio_switch *rswitch, u16 table,
- u16 route_destid, u8 * route_port)
+ u16 route_destid, u8 *route_port, int lock)
{
- return rswitch->get_entry(mport, rswitch->destid,
+ int rc;
+
+ if (lock) {
+ rc = rio_lock_device(mport, rswitch->destid,
+ rswitch->hopcount, 1000);
+ if (rc)
+ return rc;
+ }
+
+ rc = rswitch->get_entry(mport, rswitch->destid,
rswitch->hopcount, table,
route_destid, route_port);
+ if (lock)
+ rio_unlock_device(mport, rswitch->destid, rswitch->hopcount);
+
+ return rc;
}
/**
@@ -625,14 +836,14 @@
sw_inport = rio_get_swpinfo_inport(port,
RIO_ANY_DESTID(port->sys_size), hopcount);
rio_route_add_entry(port, rdev->rswitch, RIO_GLOBAL_TABLE,
- port->host_deviceid, sw_inport);
+ port->host_deviceid, sw_inport, 0);
rdev->rswitch->route_table[port->host_deviceid] = sw_inport;
for (destid = 0; destid < next_destid; destid++) {
if (destid == port->host_deviceid)
continue;
rio_route_add_entry(port, rdev->rswitch, RIO_GLOBAL_TABLE,
- destid, sw_inport);
+ destid, sw_inport, 0);
rdev->rswitch->route_table[destid] = sw_inport;
}
@@ -644,8 +855,15 @@
rio_name(rdev), rdev->vid, rdev->did, num_ports);
sw_destid = next_destid;
for (port_num = 0; port_num < num_ports; port_num++) {
- if (sw_inport == port_num)
+ /*Enable Input Output Port (transmitter reviever)*/
+ rio_enable_rx_tx_port(port, 0,
+ RIO_ANY_DESTID(port->sys_size),
+ hopcount, port_num);
+
+ if (sw_inport == port_num) {
+ rdev->rswitch->port_ok |= (1 << port_num);
continue;
+ }
cur_destid = next_destid;
@@ -655,10 +873,11 @@
pr_debug(
"RIO: scanning device on port %d\n",
port_num);
+ rdev->rswitch->port_ok |= (1 << port_num);
rio_route_add_entry(port, rdev->rswitch,
RIO_GLOBAL_TABLE,
RIO_ANY_DESTID(port->sys_size),
- port_num);
+ port_num, 0);
if (rio_enum_peer(net, port, hopcount + 1) < 0)
return -1;
@@ -672,15 +891,35 @@
rio_route_add_entry(port, rdev->rswitch,
RIO_GLOBAL_TABLE,
destid,
- port_num);
+ port_num,
+ 0);
rdev->rswitch->
route_table[destid] =
port_num;
}
}
+ } else {
+ /* If switch supports Error Management,
+ * set PORT_LOCKOUT bit for unused port
+ */
+ if (rdev->em_efptr)
+ rio_set_port_lockout(rdev, port_num, 1);
+
+ rdev->rswitch->port_ok &= ~(1 << port_num);
}
}
+ /* Direct Port-write messages to the enumeratiing host */
+ if ((rdev->src_ops & RIO_SRC_OPS_PORT_WRITE) &&
+ (rdev->em_efptr)) {
+ rio_write_config_32(rdev,
+ rdev->em_efptr + RIO_EM_PW_TGT_DEVID,
+ (port->host_deviceid << 16) |
+ (port->sys_size << 15));
+ }
+
+ rio_init_em(rdev);
+
/* Check for empty switch */
if (next_destid == sw_destid) {
next_destid++;
@@ -700,21 +939,16 @@
* rio_enum_complete- Tests if enumeration of a network is complete
* @port: Master port to send transaction
*
- * Tests the Component Tag CSR for presence of the magic enumeration
- * complete flag. Return %1 if enumeration is complete or %0 if
+ * Tests the Component Tag CSR for non-zero value (enumeration
+ * complete flag). Return %1 if enumeration is complete or %0 if
* enumeration is incomplete.
*/
static int rio_enum_complete(struct rio_mport *port)
{
u32 tag_csr;
- int ret = 0;
rio_local_read_config_32(port, RIO_COMPONENT_TAG_CSR, &tag_csr);
-
- if (tag_csr == RIO_ENUM_CMPL_MAGIC)
- ret = 1;
-
- return ret;
+ return (tag_csr & 0xffff) ? 1 : 0;
}
/**
@@ -763,17 +997,21 @@
pr_debug(
"RIO: scanning device on port %d\n",
port_num);
+
+ rio_lock_device(port, destid, hopcount, 1000);
+
for (ndestid = 0;
ndestid < RIO_ANY_DESTID(port->sys_size);
ndestid++) {
rio_route_get_entry(port, rdev->rswitch,
RIO_GLOBAL_TABLE,
ndestid,
- &route_port);
+ &route_port, 0);
if (route_port == port_num)
break;
}
+ rio_unlock_device(port, destid, hopcount);
if (rio_disc_peer
(net, port, ndestid, hopcount + 1) < 0)
return -1;
@@ -792,7 +1030,7 @@
*
* Reads the port error status CSR for the master port to
* determine if the port has an active link. Returns
- * %PORT_N_ERR_STS_PORT_OK if the master port is active
+ * %RIO_PORT_N_ERR_STS_PORT_OK if the master port is active
* or %0 if it is inactive.
*/
static int rio_mport_is_active(struct rio_mport *port)
@@ -813,7 +1051,7 @@
RIO_PORT_N_ERR_STS_CSR(port->index),
&result);
- return (result & PORT_N_ERR_STS_PORT_OK);
+ return result & RIO_PORT_N_ERR_STS_PORT_OK;
}
/**
@@ -866,12 +1104,17 @@
continue;
if (RIO_INVALID_ROUTE == rswitch->route_table[destid]) {
+ /* Skip if destid ends in empty switch*/
+ if (rswitch->destid == destid)
+ continue;
sport = rio_get_swpinfo_inport(port,
rswitch->destid, rswitch->hopcount);
if (rswitch->add_entry) {
- rio_route_add_entry(port, rswitch, RIO_GLOBAL_TABLE, destid, sport);
+ rio_route_add_entry(port, rswitch,
+ RIO_GLOBAL_TABLE, destid,
+ sport, 0);
rswitch->route_table[destid] = sport;
}
}
@@ -880,6 +1123,32 @@
}
/**
+ * rio_init_em - Initializes RIO Error Management (for switches)
+ * @rdev: RIO device
+ *
+ * For each enumerated switch, call device-specific error management
+ * initialization routine (if supplied by the switch driver).
+ */
+static void rio_init_em(struct rio_dev *rdev)
+{
+ if (rio_is_switch(rdev) && (rdev->em_efptr) &&
+ (rdev->rswitch->em_init)) {
+ rdev->rswitch->em_init(rdev);
+ }
+}
+
+/**
+ * rio_pw_enable - Enables/disables port-write handling by a master port
+ * @port: Master port associated with port-write handling
+ * @enable: 1=enable, 0=disable
+ */
+static void rio_pw_enable(struct rio_mport *port, int enable)
+{
+ if (port->ops->pwenable)
+ port->ops->pwenable(port, enable);
+}
+
+/**
* rio_enum_mport- Start enumeration through a master port
* @mport: Master port to send transactions
*
@@ -911,6 +1180,10 @@
rc = -ENOMEM;
goto out;
}
+
+ /* Enable Input Output Port (transmitter reviever) */
+ rio_enable_rx_tx_port(mport, 1, 0, 0, 0);
+
if (rio_enum_peer(net, mport, 0) < 0) {
/* A higher priority host won enumeration, bail. */
printk(KERN_INFO
@@ -922,6 +1195,7 @@
}
rio_update_route_tables(mport);
rio_clear_locks(mport);
+ rio_pw_enable(mport, 1);
} else {
printk(KERN_INFO "RIO: master port %d link inactive\n",
mport->id);
@@ -945,15 +1219,22 @@
u8 sport;
list_for_each_entry(rdev, &rio_devices, global_list)
- if (rio_is_switch(rdev))
- for (i = 0;
- i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
- i++) {
- if (rio_route_get_entry
- (rdev->net->hport, rdev->rswitch, RIO_GLOBAL_TABLE,
- i, &sport) < 0)
- continue;
- rdev->rswitch->route_table[i] = sport;
+ if (rio_is_switch(rdev)) {
+ rio_lock_device(rdev->net->hport, rdev->rswitch->destid,
+ rdev->rswitch->hopcount, 1000);
+ for (i = 0;
+ i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
+ i++) {
+ if (rio_route_get_entry
+ (rdev->net->hport, rdev->rswitch,
+ RIO_GLOBAL_TABLE, i, &sport, 0) < 0)
+ continue;
+ rdev->rswitch->route_table[i] = sport;
+ }
+
+ rio_unlock_device(rdev->net->hport,
+ rdev->rswitch->destid,
+ rdev->rswitch->hopcount);
}
}
@@ -1012,6 +1293,13 @@
del_timer_sync(&rio_enum_timer);
pr_debug("done\n");
+
+ /* Read DestID assigned by enumerator */
+ rio_local_read_config_32(mport, RIO_DID_CSR,
+ &mport->host_deviceid);
+ mport->host_deviceid = RIO_GET_DID(mport->sys_size,
+ mport->host_deviceid);
+
if (rio_disc_peer(net, mport, RIO_ANY_DESTID(mport->sys_size),
0) < 0) {
printk(KERN_INFO
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 6395c78..08fa453 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -5,6 +5,10 @@
* Copyright 2005 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ * - Added Port-Write/Error Management initialization and handling
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -333,6 +337,331 @@
}
/**
+ * rio_request_inb_pwrite - request inbound port-write message service
+ * @rdev: RIO device to which register inbound port-write callback routine
+ * @pwcback: Callback routine to execute when port-write is received
+ *
+ * Binds a port-write callback function to the RapidIO device.
+ * Returns 0 if the request has been satisfied.
+ */
+int rio_request_inb_pwrite(struct rio_dev *rdev,
+ int (*pwcback)(struct rio_dev *rdev, union rio_pw_msg *msg, int step))
+{
+ int rc = 0;
+
+ spin_lock(&rio_global_list_lock);
+ if (rdev->pwcback != NULL)
+ rc = -ENOMEM;
+ else
+ rdev->pwcback = pwcback;
+
+ spin_unlock(&rio_global_list_lock);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_request_inb_pwrite);
+
+/**
+ * rio_release_inb_pwrite - release inbound port-write message service
+ * @rdev: RIO device which registered for inbound port-write callback
+ *
+ * Removes callback from the rio_dev structure. Returns 0 if the request
+ * has been satisfied.
+ */
+int rio_release_inb_pwrite(struct rio_dev *rdev)
+{
+ int rc = -ENOMEM;
+
+ spin_lock(&rio_global_list_lock);
+ if (rdev->pwcback) {
+ rdev->pwcback = NULL;
+ rc = 0;
+ }
+
+ spin_unlock(&rio_global_list_lock);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_release_inb_pwrite);
+
+/**
+ * rio_mport_get_physefb - Helper function that returns register offset
+ * for Physical Layer Extended Features Block.
+ * @port: Master port to issue transaction
+ * @local: Indicate a local master port or remote device access
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ */
+u32
+rio_mport_get_physefb(struct rio_mport *port, int local,
+ u16 destid, u8 hopcount)
+{
+ u32 ext_ftr_ptr;
+ u32 ftr_header;
+
+ ext_ftr_ptr = rio_mport_get_efb(port, local, destid, hopcount, 0);
+
+ while (ext_ftr_ptr) {
+ if (local)
+ rio_local_read_config_32(port, ext_ftr_ptr,
+ &ftr_header);
+ else
+ rio_mport_read_config_32(port, destid, hopcount,
+ ext_ftr_ptr, &ftr_header);
+
+ ftr_header = RIO_GET_BLOCK_ID(ftr_header);
+ switch (ftr_header) {
+
+ case RIO_EFB_SER_EP_ID_V13P:
+ case RIO_EFB_SER_EP_REC_ID_V13P:
+ case RIO_EFB_SER_EP_FREE_ID_V13P:
+ case RIO_EFB_SER_EP_ID:
+ case RIO_EFB_SER_EP_REC_ID:
+ case RIO_EFB_SER_EP_FREE_ID:
+ case RIO_EFB_SER_EP_FREC_ID:
+
+ return ext_ftr_ptr;
+
+ default:
+ break;
+ }
+
+ ext_ftr_ptr = rio_mport_get_efb(port, local, destid,
+ hopcount, ext_ftr_ptr);
+ }
+
+ return ext_ftr_ptr;
+}
+
+/**
+ * rio_get_comptag - Begin or continue searching for a RIO device by component tag
+ * @comp_tag: RIO component tag to match
+ * @from: Previous RIO device found in search, or %NULL for new search
+ *
+ * Iterates through the list of known RIO devices. If a RIO device is
+ * found with a matching @comp_tag, a pointer to its device
+ * structure is returned. Otherwise, %NULL is returned. A new search
+ * is initiated by passing %NULL to the @from argument. Otherwise, if
+ * @from is not %NULL, searches continue from next device on the global
+ * list.
+ */
+static struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from)
+{
+ struct list_head *n;
+ struct rio_dev *rdev;
+
+ spin_lock(&rio_global_list_lock);
+ n = from ? from->global_list.next : rio_devices.next;
+
+ while (n && (n != &rio_devices)) {
+ rdev = rio_dev_g(n);
+ if (rdev->comp_tag == comp_tag)
+ goto exit;
+ n = n->next;
+ }
+ rdev = NULL;
+exit:
+ spin_unlock(&rio_global_list_lock);
+ return rdev;
+}
+
+/**
+ * rio_set_port_lockout - Sets/clears LOCKOUT bit (RIO EM 1.3) for a switch port.
+ * @rdev: Pointer to RIO device control structure
+ * @pnum: Switch port number to set LOCKOUT bit
+ * @lock: Operation : set (=1) or clear (=0)
+ */
+int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock)
+{
+ u8 hopcount = 0xff;
+ u16 destid = rdev->destid;
+ u32 regval;
+
+ if (rdev->rswitch) {
+ destid = rdev->rswitch->destid;
+ hopcount = rdev->rswitch->hopcount;
+ }
+
+ rio_mport_read_config_32(rdev->net->hport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum),
+ ®val);
+ if (lock)
+ regval |= RIO_PORT_N_CTL_LOCKOUT;
+ else
+ regval &= ~RIO_PORT_N_CTL_LOCKOUT;
+
+ rio_mport_write_config_32(rdev->net->hport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum),
+ regval);
+ return 0;
+}
+
+/**
+ * rio_inb_pwrite_handler - process inbound port-write message
+ * @pw_msg: pointer to inbound port-write message
+ *
+ * Processes an inbound port-write message. Returns 0 if the request
+ * has been satisfied.
+ */
+int rio_inb_pwrite_handler(union rio_pw_msg *pw_msg)
+{
+ struct rio_dev *rdev;
+ struct rio_mport *mport;
+ u8 hopcount;
+ u16 destid;
+ u32 err_status;
+ int rc, portnum;
+
+ rdev = rio_get_comptag(pw_msg->em.comptag, NULL);
+ if (rdev == NULL) {
+ /* Someting bad here (probably enumeration error) */
+ pr_err("RIO: %s No matching device for CTag 0x%08x\n",
+ __func__, pw_msg->em.comptag);
+ return -EIO;
+ }
+
+ pr_debug("RIO: Port-Write message from %s\n", rio_name(rdev));
+
+#ifdef DEBUG_PW
+ {
+ u32 i;
+ for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32);) {
+ pr_debug("0x%02x: %08x %08x %08x %08x",
+ i*4, pw_msg->raw[i], pw_msg->raw[i + 1],
+ pw_msg->raw[i + 2], pw_msg->raw[i + 3]);
+ i += 4;
+ }
+ pr_debug("\n");
+ }
+#endif
+
+ /* Call an external service function (if such is registered
+ * for this device). This may be the service for endpoints that send
+ * device-specific port-write messages. End-point messages expected
+ * to be handled completely by EP specific device driver.
+ * For switches rc==0 signals that no standard processing required.
+ */
+ if (rdev->pwcback != NULL) {
+ rc = rdev->pwcback(rdev, pw_msg, 0);
+ if (rc == 0)
+ return 0;
+ }
+
+ /* For End-point devices processing stops here */
+ if (!(rdev->pef & RIO_PEF_SWITCH))
+ return 0;
+
+ if (rdev->phys_efptr == 0) {
+ pr_err("RIO_PW: Bad switch initialization for %s\n",
+ rio_name(rdev));
+ return 0;
+ }
+
+ mport = rdev->net->hport;
+ destid = rdev->rswitch->destid;
+ hopcount = rdev->rswitch->hopcount;
+
+ /*
+ * Process the port-write notification from switch
+ */
+
+ portnum = pw_msg->em.is_port & 0xFF;
+
+ if (rdev->rswitch->em_handle)
+ rdev->rswitch->em_handle(rdev, portnum);
+
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
+ &err_status);
+ pr_debug("RIO_PW: SP%d_ERR_STS_CSR=0x%08x\n", portnum, err_status);
+
+ if (pw_msg->em.errdetect) {
+ pr_debug("RIO_PW: RIO_EM_P%d_ERR_DETECT=0x%08x\n",
+ portnum, pw_msg->em.errdetect);
+ /* Clear EM Port N Error Detect CSR */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), 0);
+ }
+
+ if (pw_msg->em.ltlerrdet) {
+ pr_debug("RIO_PW: RIO_EM_LTL_ERR_DETECT=0x%08x\n",
+ pw_msg->em.ltlerrdet);
+ /* Clear EM L/T Layer Error Detect CSR */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, 0);
+ }
+
+ /* Clear Port Errors */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
+ err_status & RIO_PORT_N_ERR_STS_CLR_MASK);
+
+ if (rdev->rswitch->port_ok & (1 << portnum)) {
+ if (err_status & RIO_PORT_N_ERR_STS_PORT_UNINIT) {
+ rdev->rswitch->port_ok &= ~(1 << portnum);
+ rio_set_port_lockout(rdev, portnum, 1);
+
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->phys_efptr +
+ RIO_PORT_N_ACK_STS_CSR(portnum),
+ RIO_PORT_N_ACK_CLEAR);
+
+ /* Schedule Extraction Service */
+ pr_debug("RIO_PW: Device Extraction on [%s]-P%d\n",
+ rio_name(rdev), portnum);
+ }
+ } else {
+ if (err_status & RIO_PORT_N_ERR_STS_PORT_OK) {
+ rdev->rswitch->port_ok |= (1 << portnum);
+ rio_set_port_lockout(rdev, portnum, 0);
+
+ /* Schedule Insertion Service */
+ pr_debug("RIO_PW: Device Insertion on [%s]-P%d\n",
+ rio_name(rdev), portnum);
+ }
+ }
+
+ /* Clear Port-Write Pending bit */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
+ RIO_PORT_N_ERR_STS_PW_PEND);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_inb_pwrite_handler);
+
+/**
+ * rio_mport_get_efb - get pointer to next extended features block
+ * @port: Master port to issue transaction
+ * @local: Indicate a local master port or remote device access
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @from: Offset of current Extended Feature block header (if 0 starts
+ * from ExtFeaturePtr)
+ */
+u32
+rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
+ u8 hopcount, u32 from)
+{
+ u32 reg_val;
+
+ if (from == 0) {
+ if (local)
+ rio_local_read_config_32(port, RIO_ASM_INFO_CAR,
+ ®_val);
+ else
+ rio_mport_read_config_32(port, destid, hopcount,
+ RIO_ASM_INFO_CAR, ®_val);
+ return reg_val & RIO_EXT_FTR_PTR_MASK;
+ } else {
+ if (local)
+ rio_local_read_config_32(port, from, ®_val);
+ else
+ rio_mport_read_config_32(port, destid, hopcount,
+ from, ®_val);
+ return RIO_GET_BLOCK_ID(reg_val);
+ }
+}
+
+/**
* rio_mport_get_feature - query for devices' extended features
* @port: Master port to issue transaction
* @local: Indicate a local master port or remote device access
@@ -451,6 +780,110 @@
return rio_get_asm(vid, did, RIO_ANY_ID, RIO_ANY_ID, from);
}
+/**
+ * rio_std_route_add_entry - Add switch route table entry using standard
+ * registers defined in RIO specification rev.1.3
+ * @mport: Master port to issue transaction
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @table: routing table ID (global or port-specific)
+ * @route_destid: destID entry in the RT
+ * @route_port: destination port for specified destID
+ */
+int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 route_port)
+{
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR,
+ (u32)route_destid);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR,
+ (u32)route_port);
+ }
+
+ udelay(10);
+ return 0;
+}
+
+/**
+ * rio_std_route_get_entry - Read switch route table entry (port number)
+ * assosiated with specified destID using standard registers defined in RIO
+ * specification rev.1.3
+ * @mport: Master port to issue transaction
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @table: routing table ID (global or port-specific)
+ * @route_destid: destID entry in the RT
+ * @route_port: returned destination port for specified destID
+ */
+int rio_std_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 *route_port)
+{
+ u32 result;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+ *route_port = (u8)result;
+ }
+
+ return 0;
+}
+
+/**
+ * rio_std_route_clr_table - Clear swotch route table using standard registers
+ * defined in RIO specification rev.1.3.
+ * @mport: Master port to issue transaction
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @table: routing table ID (global or port-specific)
+ */
+int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table)
+{
+ u32 max_destid = 0xff;
+ u32 i, pef, id_inc = 1, ext_cfg = 0;
+ u32 port_sel = RIO_INVALID_ROUTE;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_PEF_CAR, &pef);
+
+ if (mport->sys_size) {
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_SWITCH_RT_LIMIT,
+ &max_destid);
+ max_destid &= RIO_RT_MAX_DESTID;
+ }
+
+ if (pef & RIO_PEF_EXT_RT) {
+ ext_cfg = 0x80000000;
+ id_inc = 4;
+ port_sel = (RIO_INVALID_ROUTE << 24) |
+ (RIO_INVALID_ROUTE << 16) |
+ (RIO_INVALID_ROUTE << 8) |
+ RIO_INVALID_ROUTE;
+ }
+
+ for (i = 0; i <= max_destid;) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR,
+ ext_cfg | i);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR,
+ port_sel);
+ i += id_inc;
+ }
+ }
+
+ udelay(10);
+ return 0;
+}
+
static void rio_fixup_device(struct rio_dev *dev)
{
}
diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h
index 7786d02..f27b7a9 100644
--- a/drivers/rapidio/rio.h
+++ b/drivers/rapidio/rio.h
@@ -18,38 +18,50 @@
extern u32 rio_mport_get_feature(struct rio_mport *mport, int local, u16 destid,
u8 hopcount, int ftr);
+extern u32 rio_mport_get_physefb(struct rio_mport *port, int local,
+ u16 destid, u8 hopcount);
+extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
+ u8 hopcount, u32 from);
extern int rio_create_sysfs_dev_files(struct rio_dev *rdev);
extern int rio_enum_mport(struct rio_mport *mport);
extern int rio_disc_mport(struct rio_mport *mport);
+extern int rio_std_route_add_entry(struct rio_mport *mport, u16 destid,
+ u8 hopcount, u16 table, u16 route_destid,
+ u8 route_port);
+extern int rio_std_route_get_entry(struct rio_mport *mport, u16 destid,
+ u8 hopcount, u16 table, u16 route_destid,
+ u8 *route_port);
+extern int rio_std_route_clr_table(struct rio_mport *mport, u16 destid,
+ u8 hopcount, u16 table);
+extern int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock);
/* Structures internal to the RIO core code */
extern struct device_attribute rio_dev_attrs[];
extern spinlock_t rio_global_list_lock;
-extern struct rio_route_ops __start_rio_route_ops[];
-extern struct rio_route_ops __end_rio_route_ops[];
+extern struct rio_switch_ops __start_rio_switch_ops[];
+extern struct rio_switch_ops __end_rio_switch_ops[];
/* Helpers internal to the RIO core code */
-#define DECLARE_RIO_ROUTE_SECTION(section, vid, did, add_hook, get_hook) \
- static struct rio_route_ops __rio_route_ops __used \
- __section(section)= { vid, did, add_hook, get_hook };
+#define DECLARE_RIO_SWITCH_SECTION(section, name, vid, did, init_hook) \
+ static const struct rio_switch_ops __rio_switch_##name __used \
+ __section(section) = { vid, did, init_hook };
/**
- * DECLARE_RIO_ROUTE_OPS - Registers switch routing operations
+ * DECLARE_RIO_SWITCH_INIT - Registers switch initialization routine
* @vid: RIO vendor ID
* @did: RIO device ID
- * @add_hook: Callback that adds a route entry
- * @get_hook: Callback that gets a route entry
+ * @init_hook: Callback that performs switch-specific initialization
*
- * Manipulating switch route tables in RIO is switch specific. This
- * registers a switch by vendor and device ID with two callbacks for
- * modifying and retrieving route entries in a switch. A &struct
- * rio_route_ops is initialized with the ops and placed into a
- * RIO-specific kernel section.
+ * Manipulating switch route tables and error management in RIO
+ * is switch specific. This registers a switch by vendor and device ID with
+ * initialization callback for setting up switch operations and (if required)
+ * hardware initialization. A &struct rio_switch_ops is initialized with
+ * pointer to the init routine and placed into a RIO-specific kernel section.
*/
-#define DECLARE_RIO_ROUTE_OPS(vid, did, add_hook, get_hook) \
- DECLARE_RIO_ROUTE_SECTION(.rio_route_ops, \
- vid, did, add_hook, get_hook)
+#define DECLARE_RIO_SWITCH_INIT(vid, did, init_hook) \
+ DECLARE_RIO_SWITCH_SECTION(.rio_switch_ops, vid##did, \
+ vid, did, init_hook)
#define RIO_GET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16))
#define RIO_SET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x000000ff) << 16))
diff --git a/drivers/rapidio/switches/Kconfig b/drivers/rapidio/switches/Kconfig
new file mode 100644
index 0000000..2b4e9b2
--- /dev/null
+++ b/drivers/rapidio/switches/Kconfig
@@ -0,0 +1,28 @@
+#
+# RapidIO switches configuration
+#
+config RAPIDIO_TSI57X
+ bool "IDT Tsi57x SRIO switches support"
+ depends on RAPIDIO
+ ---help---
+ Includes support for IDT Tsi57x family of serial RapidIO switches.
+
+config RAPIDIO_CPS_XX
+ bool "IDT CPS-xx SRIO switches support"
+ depends on RAPIDIO
+ ---help---
+ Includes support for IDT CPS-16/12/10/8 serial RapidIO switches.
+
+config RAPIDIO_TSI568
+ bool "Tsi568 SRIO switch support"
+ depends on RAPIDIO
+ default n
+ ---help---
+ Includes support for IDT Tsi568 serial RapidIO switch.
+
+config RAPIDIO_TSI500
+ bool "Tsi500 Parallel RapidIO switch support"
+ depends on RAPIDIO
+ default n
+ ---help---
+ Includes support for IDT Tsi500 parallel RapidIO switch.
diff --git a/drivers/rapidio/switches/Makefile b/drivers/rapidio/switches/Makefile
index b924f83..fe4adc3 100644
--- a/drivers/rapidio/switches/Makefile
+++ b/drivers/rapidio/switches/Makefile
@@ -2,4 +2,11 @@
# Makefile for RIO switches
#
-obj-$(CONFIG_RAPIDIO) += tsi500.o
+obj-$(CONFIG_RAPIDIO_TSI57X) += tsi57x.o
+obj-$(CONFIG_RAPIDIO_CPS_XX) += idtcps.o
+obj-$(CONFIG_RAPIDIO_TSI568) += tsi568.o
+obj-$(CONFIG_RAPIDIO_TSI500) += tsi500.o
+
+ifeq ($(CONFIG_RAPIDIO_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
diff --git a/drivers/rapidio/switches/idtcps.c b/drivers/rapidio/switches/idtcps.c
new file mode 100644
index 0000000..2c790c1
--- /dev/null
+++ b/drivers/rapidio/switches/idtcps.c
@@ -0,0 +1,137 @@
+/*
+ * IDT CPS RapidIO switches support
+ *
+ * Copyright 2009-2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include "../rio.h"
+
+#define CPS_DEFAULT_ROUTE 0xde
+#define CPS_NO_ROUTE 0xdf
+
+#define IDTCPS_RIO_DOMAIN 0xf20020
+
+static int
+idtcps_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 route_port)
+{
+ u32 result;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
+
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+ result = (0xffffff00 & result) | (u32)route_port;
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR, result);
+ }
+
+ return 0;
+}
+
+static int
+idtcps_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 *route_port)
+{
+ u32 result;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
+
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+ if (CPS_DEFAULT_ROUTE == (u8)result ||
+ CPS_NO_ROUTE == (u8)result)
+ *route_port = RIO_INVALID_ROUTE;
+ else
+ *route_port = (u8)result;
+ }
+
+ return 0;
+}
+
+static int
+idtcps_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table)
+{
+ u32 i;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ for (i = 0x80000000; i <= 0x800000ff;) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR, i);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR,
+ (CPS_DEFAULT_ROUTE << 24) |
+ (CPS_DEFAULT_ROUTE << 16) |
+ (CPS_DEFAULT_ROUTE << 8) | CPS_DEFAULT_ROUTE);
+ i += 4;
+ }
+ }
+
+ return 0;
+}
+
+static int
+idtcps_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u8 sw_domain)
+{
+ /*
+ * Switch domain configuration operates only at global level
+ */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDTCPS_RIO_DOMAIN, (u32)sw_domain);
+ return 0;
+}
+
+static int
+idtcps_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u8 *sw_domain)
+{
+ u32 regval;
+
+ /*
+ * Switch domain configuration operates only at global level
+ */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ IDTCPS_RIO_DOMAIN, ®val);
+
+ *sw_domain = (u8)(regval & 0xff);
+
+ return 0;
+}
+
+static int idtcps_switch_init(struct rio_dev *rdev, int do_enum)
+{
+ pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+ rdev->rswitch->add_entry = idtcps_route_add_entry;
+ rdev->rswitch->get_entry = idtcps_route_get_entry;
+ rdev->rswitch->clr_table = idtcps_route_clr_table;
+ rdev->rswitch->set_domain = idtcps_set_domain;
+ rdev->rswitch->get_domain = idtcps_get_domain;
+ rdev->rswitch->em_init = NULL;
+ rdev->rswitch->em_handle = NULL;
+
+ return 0;
+}
+
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS6Q, idtcps_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS8, idtcps_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS10Q, idtcps_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS12, idtcps_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS16, idtcps_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDT70K200, idtcps_switch_init);
diff --git a/drivers/rapidio/switches/tsi500.c b/drivers/rapidio/switches/tsi500.c
index c77c23b..914eddd 100644
--- a/drivers/rapidio/switches/tsi500.c
+++ b/drivers/rapidio/switches/tsi500.c
@@ -1,6 +1,10 @@
/*
* RapidIO Tsi500 switch support
*
+ * Copyright 2009-2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ * - Modified switch operations initialization.
+ *
* Copyright 2005 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
@@ -57,4 +61,18 @@
return ret;
}
-DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI500, tsi500_route_add_entry, tsi500_route_get_entry);
+static int tsi500_switch_init(struct rio_dev *rdev, int do_enum)
+{
+ pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+ rdev->rswitch->add_entry = tsi500_route_add_entry;
+ rdev->rswitch->get_entry = tsi500_route_get_entry;
+ rdev->rswitch->clr_table = NULL;
+ rdev->rswitch->set_domain = NULL;
+ rdev->rswitch->get_domain = NULL;
+ rdev->rswitch->em_init = NULL;
+ rdev->rswitch->em_handle = NULL;
+
+ return 0;
+}
+
+DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI500, tsi500_switch_init);
diff --git a/drivers/rapidio/switches/tsi568.c b/drivers/rapidio/switches/tsi568.c
new file mode 100644
index 0000000..f7fd789
--- /dev/null
+++ b/drivers/rapidio/switches/tsi568.c
@@ -0,0 +1,146 @@
+/*
+ * RapidIO Tsi568 switch support
+ *
+ * Copyright 2009-2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ * - Added EM support
+ * - Modified switch operations initialization.
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/delay.h>
+#include "../rio.h"
+
+/* Global (broadcast) route registers */
+#define SPBC_ROUTE_CFG_DESTID 0x10070
+#define SPBC_ROUTE_CFG_PORT 0x10074
+
+/* Per port route registers */
+#define SPP_ROUTE_CFG_DESTID(n) (0x11070 + 0x100*n)
+#define SPP_ROUTE_CFG_PORT(n) (0x11074 + 0x100*n)
+
+#define TSI568_SP_MODE_BC 0x10004
+#define TSI568_SP_MODE_PW_DIS 0x08000000
+
+static int
+tsi568_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 route_port)
+{
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPBC_ROUTE_CFG_DESTID, route_destid);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPBC_ROUTE_CFG_PORT, route_port);
+ } else {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_DESTID(table),
+ route_destid);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_PORT(table), route_port);
+ }
+
+ udelay(10);
+
+ return 0;
+}
+
+static int
+tsi568_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 *route_port)
+{
+ int ret = 0;
+ u32 result;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPBC_ROUTE_CFG_DESTID, route_destid);
+ rio_mport_read_config_32(mport, destid, hopcount,
+ SPBC_ROUTE_CFG_PORT, &result);
+ } else {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_DESTID(table),
+ route_destid);
+ rio_mport_read_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_PORT(table), &result);
+ }
+
+ *route_port = result;
+ if (*route_port > 15)
+ ret = -1;
+
+ return ret;
+}
+
+static int
+tsi568_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table)
+{
+ u32 route_idx;
+ u32 lut_size;
+
+ lut_size = (mport->sys_size) ? 0x1ff : 0xff;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPBC_ROUTE_CFG_DESTID, 0x80000000);
+ for (route_idx = 0; route_idx <= lut_size; route_idx++)
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPBC_ROUTE_CFG_PORT,
+ RIO_INVALID_ROUTE);
+ } else {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_DESTID(table),
+ 0x80000000);
+ for (route_idx = 0; route_idx <= lut_size; route_idx++)
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_PORT(table),
+ RIO_INVALID_ROUTE);
+ }
+
+ return 0;
+}
+
+static int
+tsi568_em_init(struct rio_dev *rdev)
+{
+ struct rio_mport *mport = rdev->net->hport;
+ u16 destid = rdev->rswitch->destid;
+ u8 hopcount = rdev->rswitch->hopcount;
+ u32 regval;
+
+ pr_debug("TSI568 %s [%d:%d]\n", __func__, destid, hopcount);
+
+ /* Make sure that Port-Writes are disabled (for all ports) */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ TSI568_SP_MODE_BC, ®val);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ TSI568_SP_MODE_BC, regval | TSI568_SP_MODE_PW_DIS);
+
+ return 0;
+}
+
+static int tsi568_switch_init(struct rio_dev *rdev, int do_enum)
+{
+ pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+ rdev->rswitch->add_entry = tsi568_route_add_entry;
+ rdev->rswitch->get_entry = tsi568_route_get_entry;
+ rdev->rswitch->clr_table = tsi568_route_clr_table;
+ rdev->rswitch->set_domain = NULL;
+ rdev->rswitch->get_domain = NULL;
+ rdev->rswitch->em_init = tsi568_em_init;
+ rdev->rswitch->em_handle = NULL;
+
+ return 0;
+}
+
+DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI568, tsi568_switch_init);
diff --git a/drivers/rapidio/switches/tsi57x.c b/drivers/rapidio/switches/tsi57x.c
new file mode 100644
index 0000000..d34df72
--- /dev/null
+++ b/drivers/rapidio/switches/tsi57x.c
@@ -0,0 +1,315 @@
+/*
+ * RapidIO Tsi57x switch family support
+ *
+ * Copyright 2009-2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ * - Added EM support
+ * - Modified switch operations initialization.
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/delay.h>
+#include "../rio.h"
+
+/* Global (broadcast) route registers */
+#define SPBC_ROUTE_CFG_DESTID 0x10070
+#define SPBC_ROUTE_CFG_PORT 0x10074
+
+/* Per port route registers */
+#define SPP_ROUTE_CFG_DESTID(n) (0x11070 + 0x100*n)
+#define SPP_ROUTE_CFG_PORT(n) (0x11074 + 0x100*n)
+
+#define TSI578_SP_MODE(n) (0x11004 + n*0x100)
+#define TSI578_SP_MODE_GLBL 0x10004
+#define TSI578_SP_MODE_PW_DIS 0x08000000
+#define TSI578_SP_MODE_LUT_512 0x01000000
+
+#define TSI578_SP_CTL_INDEP(n) (0x13004 + n*0x100)
+#define TSI578_SP_LUT_PEINF(n) (0x13010 + n*0x100)
+#define TSI578_SP_CS_TX(n) (0x13014 + n*0x100)
+#define TSI578_SP_INT_STATUS(n) (0x13018 + n*0x100)
+
+#define TSI578_GLBL_ROUTE_BASE 0x10078
+
+static int
+tsi57x_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 route_port)
+{
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPBC_ROUTE_CFG_DESTID, route_destid);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPBC_ROUTE_CFG_PORT, route_port);
+ } else {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_DESTID(table), route_destid);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_PORT(table), route_port);
+ }
+
+ udelay(10);
+
+ return 0;
+}
+
+static int
+tsi57x_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 *route_port)
+{
+ int ret = 0;
+ u32 result;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ /* Use local RT of the ingress port to avoid possible
+ race condition */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_SWP_INFO_CAR, &result);
+ table = (result & RIO_SWP_INFO_PORT_NUM_MASK);
+ }
+
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_DESTID(table), route_destid);
+ rio_mport_read_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_PORT(table), &result);
+
+ *route_port = (u8)result;
+ if (*route_port > 15)
+ ret = -1;
+
+ return ret;
+}
+
+static int
+tsi57x_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table)
+{
+ u32 route_idx;
+ u32 lut_size;
+
+ lut_size = (mport->sys_size) ? 0x1ff : 0xff;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPBC_ROUTE_CFG_DESTID, 0x80000000);
+ for (route_idx = 0; route_idx <= lut_size; route_idx++)
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPBC_ROUTE_CFG_PORT,
+ RIO_INVALID_ROUTE);
+ } else {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_DESTID(table), 0x80000000);
+ for (route_idx = 0; route_idx <= lut_size; route_idx++)
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_PORT(table) , RIO_INVALID_ROUTE);
+ }
+
+ return 0;
+}
+
+static int
+tsi57x_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u8 sw_domain)
+{
+ u32 regval;
+
+ /*
+ * Switch domain configuration operates only at global level
+ */
+
+ /* Turn off flat (LUT_512) mode */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ TSI578_SP_MODE_GLBL, ®val);
+ rio_mport_write_config_32(mport, destid, hopcount, TSI578_SP_MODE_GLBL,
+ regval & ~TSI578_SP_MODE_LUT_512);
+ /* Set switch domain base */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ TSI578_GLBL_ROUTE_BASE,
+ (u32)(sw_domain << 24));
+ return 0;
+}
+
+static int
+tsi57x_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u8 *sw_domain)
+{
+ u32 regval;
+
+ /*
+ * Switch domain configuration operates only at global level
+ */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ TSI578_GLBL_ROUTE_BASE, ®val);
+
+ *sw_domain = (u8)(regval >> 24);
+
+ return 0;
+}
+
+static int
+tsi57x_em_init(struct rio_dev *rdev)
+{
+ struct rio_mport *mport = rdev->net->hport;
+ u16 destid = rdev->rswitch->destid;
+ u8 hopcount = rdev->rswitch->hopcount;
+ u32 regval;
+ int portnum;
+
+ pr_debug("TSI578 %s [%d:%d]\n", __func__, destid, hopcount);
+
+ for (portnum = 0; portnum < 16; portnum++) {
+ /* Make sure that Port-Writes are enabled (for all ports) */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ TSI578_SP_MODE(portnum), ®val);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ TSI578_SP_MODE(portnum),
+ regval & ~TSI578_SP_MODE_PW_DIS);
+
+ /* Clear all pending interrupts */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->phys_efptr +
+ RIO_PORT_N_ERR_STS_CSR(portnum),
+ ®val);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->phys_efptr +
+ RIO_PORT_N_ERR_STS_CSR(portnum),
+ regval & 0x07120214);
+
+ rio_mport_read_config_32(mport, destid, hopcount,
+ TSI578_SP_INT_STATUS(portnum), ®val);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ TSI578_SP_INT_STATUS(portnum),
+ regval & 0x000700bd);
+
+ /* Enable all interrupts to allow ports to send a port-write */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ TSI578_SP_CTL_INDEP(portnum), ®val);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ TSI578_SP_CTL_INDEP(portnum),
+ regval | 0x000b0000);
+
+ /* Skip next (odd) port if the current port is in x4 mode */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+ ®val);
+ if ((regval & RIO_PORT_N_CTL_PWIDTH) == RIO_PORT_N_CTL_PWIDTH_4)
+ portnum++;
+ }
+
+ return 0;
+}
+
+static int
+tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
+{
+ struct rio_mport *mport = rdev->net->hport;
+ u16 destid = rdev->rswitch->destid;
+ u8 hopcount = rdev->rswitch->hopcount;
+ u32 intstat, err_status;
+ int sendcount, checkcount;
+ u8 route_port;
+ u32 regval;
+
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
+ &err_status);
+
+ if ((err_status & RIO_PORT_N_ERR_STS_PORT_OK) &&
+ (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
+ RIO_PORT_N_ERR_STS_PW_INP_ES))) {
+ /* Remove any queued packets by locking/unlocking port */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+ ®val);
+ if (!(regval & RIO_PORT_N_CTL_LOCKOUT)) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+ regval | RIO_PORT_N_CTL_LOCKOUT);
+ udelay(50);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+ regval);
+ }
+
+ /* Read from link maintenance response register to clear
+ * valid bit
+ */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(portnum),
+ ®val);
+
+ /* Send a Packet-Not-Accepted/Link-Request-Input-Status control
+ * symbol to recover from IES/OES
+ */
+ sendcount = 3;
+ while (sendcount) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ TSI578_SP_CS_TX(portnum), 0x40fc8000);
+ checkcount = 3;
+ while (checkcount--) {
+ udelay(50);
+ rio_mport_read_config_32(
+ mport, destid, hopcount,
+ rdev->phys_efptr +
+ RIO_PORT_N_MNT_RSP_CSR(portnum),
+ ®val);
+ if (regval & RIO_PORT_N_MNT_RSP_RVAL)
+ goto exit_es;
+ }
+
+ sendcount--;
+ }
+ }
+
+exit_es:
+ /* Clear implementation specific error status bits */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ TSI578_SP_INT_STATUS(portnum), &intstat);
+ pr_debug("TSI578[%x:%x] SP%d_INT_STATUS=0x%08x\n",
+ destid, hopcount, portnum, intstat);
+
+ if (intstat & 0x10000) {
+ rio_mport_read_config_32(mport, destid, hopcount,
+ TSI578_SP_LUT_PEINF(portnum), ®val);
+ regval = (mport->sys_size) ? (regval >> 16) : (regval >> 24);
+ route_port = rdev->rswitch->route_table[regval];
+ pr_debug("RIO: TSI578[%s] P%d LUT Parity Error (destID=%d)\n",
+ rio_name(rdev), portnum, regval);
+ tsi57x_route_add_entry(mport, destid, hopcount,
+ RIO_GLOBAL_TABLE, regval, route_port);
+ }
+
+ rio_mport_write_config_32(mport, destid, hopcount,
+ TSI578_SP_INT_STATUS(portnum),
+ intstat & 0x000700bd);
+
+ return 0;
+}
+
+static int tsi57x_switch_init(struct rio_dev *rdev, int do_enum)
+{
+ pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+ rdev->rswitch->add_entry = tsi57x_route_add_entry;
+ rdev->rswitch->get_entry = tsi57x_route_get_entry;
+ rdev->rswitch->clr_table = tsi57x_route_clr_table;
+ rdev->rswitch->set_domain = tsi57x_set_domain;
+ rdev->rswitch->get_domain = tsi57x_get_domain;
+ rdev->rswitch->em_init = tsi57x_em_init;
+ rdev->rswitch->em_handle = tsi57x_em_handler;
+
+ return 0;
+}
+
+DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI572, tsi57x_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI574, tsi57x_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI577, tsi57x_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI578, tsi57x_switch_init);
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
index 1afd008..7b14a67 100644
--- a/drivers/regulator/ab3100.c
+++ b/drivers/regulator/ab3100.c
@@ -16,7 +16,7 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
-#include <linux/mfd/ab3100.h>
+#include <linux/mfd/abx500.h>
/* LDO registers and some handy masking definitions for AB3100 */
#define AB3100_LDO_A 0x40
@@ -41,7 +41,7 @@
* struct ab3100_regulator
* A struct passed around the individual regulator functions
* @platform_device: platform device holding this regulator
- * @ab3100: handle to the AB3100 parent chip
+ * @dev: handle to the device
* @plfdata: AB3100 platform data passed in at probe time
* @regreg: regulator register number in the AB3100
* @fixed_voltage: a fixed voltage for this regulator, if this
@@ -52,7 +52,7 @@
*/
struct ab3100_regulator {
struct regulator_dev *rdev;
- struct ab3100 *ab3100;
+ struct device *dev;
struct ab3100_platform_data *plfdata;
u8 regreg;
int fixed_voltage;
@@ -183,7 +183,7 @@
int err;
u8 regval;
- err = ab3100_get_register_interruptible(abreg->ab3100, abreg->regreg,
+ err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
®val);
if (err) {
dev_warn(®->dev, "failed to get regid %d value\n",
@@ -197,7 +197,7 @@
regval |= AB3100_REG_ON_MASK;
- err = ab3100_set_register_interruptible(abreg->ab3100, abreg->regreg,
+ err = abx500_set_register_interruptible(abreg->dev, 0, abreg->regreg,
regval);
if (err) {
dev_warn(®->dev, "failed to set regid %d value\n",
@@ -245,14 +245,14 @@
if (abreg->regreg == AB3100_LDO_D) {
dev_info(®->dev, "disabling LDO D - shut down system\n");
/* Setting LDO D to 0x00 cuts the power to the SoC */
- return ab3100_set_register_interruptible(abreg->ab3100,
+ return abx500_set_register_interruptible(abreg->dev, 0,
AB3100_LDO_D, 0x00U);
}
/*
* All other regulators are handled here
*/
- err = ab3100_get_register_interruptible(abreg->ab3100, abreg->regreg,
+ err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
®val);
if (err) {
dev_err(®->dev, "unable to get register 0x%x\n",
@@ -260,7 +260,7 @@
return err;
}
regval &= ~AB3100_REG_ON_MASK;
- return ab3100_set_register_interruptible(abreg->ab3100, abreg->regreg,
+ return abx500_set_register_interruptible(abreg->dev, 0, abreg->regreg,
regval);
}
@@ -270,7 +270,7 @@
u8 regval;
int err;
- err = ab3100_get_register_interruptible(abreg->ab3100, abreg->regreg,
+ err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
®val);
if (err) {
dev_err(®->dev, "unable to get register 0x%x\n",
@@ -305,7 +305,7 @@
* For variable types, read out setting and index into
* supplied voltage list.
*/
- err = ab3100_get_register_interruptible(abreg->ab3100,
+ err = abx500_get_register_interruptible(abreg->dev, 0,
abreg->regreg, ®val);
if (err) {
dev_warn(®->dev,
@@ -373,7 +373,7 @@
if (bestindex < 0)
return bestindex;
- err = ab3100_get_register_interruptible(abreg->ab3100,
+ err = abx500_get_register_interruptible(abreg->dev, 0,
abreg->regreg, ®val);
if (err) {
dev_warn(®->dev,
@@ -386,7 +386,7 @@
regval &= ~0xE0;
regval |= (bestindex << 5);
- err = ab3100_set_register_interruptible(abreg->ab3100,
+ err = abx500_set_register_interruptible(abreg->dev, 0,
abreg->regreg, regval);
if (err)
dev_warn(®->dev, "failed to set regulator register %02x\n",
@@ -414,7 +414,7 @@
/* LDO E and BUCK have special suspend voltages you can set */
bestindex = ab3100_get_best_voltage_index(reg, uV, uV);
- err = ab3100_get_register_interruptible(abreg->ab3100,
+ err = abx500_get_register_interruptible(abreg->dev, 0,
targetreg, ®val);
if (err) {
dev_warn(®->dev,
@@ -427,7 +427,7 @@
regval &= ~0xE0;
regval |= (bestindex << 5);
- err = ab3100_set_register_interruptible(abreg->ab3100,
+ err = abx500_set_register_interruptible(abreg->dev, 0,
targetreg, regval);
if (err)
dev_warn(®->dev, "failed to set regulator register %02x\n",
@@ -574,13 +574,12 @@
static int __devinit ab3100_regulators_probe(struct platform_device *pdev)
{
struct ab3100_platform_data *plfdata = pdev->dev.platform_data;
- struct ab3100 *ab3100 = platform_get_drvdata(pdev);
int err = 0;
u8 data;
int i;
/* Check chip state */
- err = ab3100_get_register_interruptible(ab3100,
+ err = abx500_get_register_interruptible(&pdev->dev, 0,
AB3100_LDO_D, &data);
if (err) {
dev_err(&pdev->dev, "could not read initial status of LDO_D\n");
@@ -595,7 +594,7 @@
/* Set up regulators */
for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) {
- err = ab3100_set_register_interruptible(ab3100,
+ err = abx500_set_register_interruptible(&pdev->dev, 0,
ab3100_reg_init_order[i],
plfdata->reg_initvals[i]);
if (err) {
@@ -617,7 +616,7 @@
* see what it looks like for a certain machine, go
* into the machine I2C setup.
*/
- reg->ab3100 = ab3100;
+ reg->dev = &pdev->dev;
reg->plfdata = plfdata;
/*
diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
index 671a7d1..8ae3732 100644
--- a/drivers/regulator/lp3971.c
+++ b/drivers/regulator/lp3971.c
@@ -519,8 +519,6 @@
struct lp3971 *lp3971 = i2c_get_clientdata(i2c);
int i;
- i2c_set_clientdata(i2c, NULL);
-
for (i = 0; i < lp3971->num_regulators; i++)
regulator_unregister(lp3971->rdev[i]);
diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c
index b3c1afc..2b54d9d 100644
--- a/drivers/regulator/max1586.c
+++ b/drivers/regulator/max1586.c
@@ -244,7 +244,6 @@
for (i = 0; i <= MAX1586_V6; i++)
if (rdev[i])
regulator_unregister(rdev[i]);
- i2c_set_clientdata(client, NULL);
kfree(rdev);
return 0;
diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c
index bfc4c5f..4520ace 100644
--- a/drivers/regulator/max8649.c
+++ b/drivers/regulator/max8649.c
@@ -357,7 +357,6 @@
dev_info(info->dev, "Max8649 regulator device is detected.\n");
return 0;
out:
- i2c_set_clientdata(client, NULL);
kfree(info);
return ret;
}
@@ -369,7 +368,6 @@
if (info) {
if (info->regulator)
regulator_unregister(info->regulator);
- i2c_set_clientdata(client, NULL);
kfree(info);
}
diff --git a/drivers/regulator/max8660.c b/drivers/regulator/max8660.c
index 3790b21..d97220e 100644
--- a/drivers/regulator/max8660.c
+++ b/drivers/regulator/max8660.c
@@ -471,7 +471,6 @@
for (i = 0; i < MAX8660_V_END; i++)
if (rdev[i])
regulator_unregister(rdev[i]);
- i2c_set_clientdata(client, NULL);
kfree(rdev);
return 0;
diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c
index 8e2f209..f50afc9 100644
--- a/drivers/regulator/tps65023-regulator.c
+++ b/drivers/regulator/tps65023-regulator.c
@@ -538,9 +538,6 @@
struct tps_pmic *tps = i2c_get_clientdata(client);
int i;
- /* clear the client data in i2c */
- i2c_set_clientdata(client, NULL);
-
for (i = 0; i < TPS65023_NUM_REGULATOR; i++)
regulator_unregister(tps->rdev[i]);
diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c
index 74841ab..14b45762 100644
--- a/drivers/regulator/tps6507x-regulator.c
+++ b/drivers/regulator/tps6507x-regulator.c
@@ -22,68 +22,9 @@
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
-#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/slab.h>
-
-/* Register definitions */
-#define TPS6507X_REG_PPATH1 0X01
-#define TPS6507X_REG_INT 0X02
-#define TPS6507X_REG_CHGCONFIG0 0X03
-#define TPS6507X_REG_CHGCONFIG1 0X04
-#define TPS6507X_REG_CHGCONFIG2 0X05
-#define TPS6507X_REG_CHGCONFIG3 0X06
-#define TPS6507X_REG_REG_ADCONFIG 0X07
-#define TPS6507X_REG_TSCMODE 0X08
-#define TPS6507X_REG_ADRESULT_1 0X09
-#define TPS6507X_REG_ADRESULT_2 0X0A
-#define TPS6507X_REG_PGOOD 0X0B
-#define TPS6507X_REG_PGOODMASK 0X0C
-#define TPS6507X_REG_CON_CTRL1 0X0D
-#define TPS6507X_REG_CON_CTRL2 0X0E
-#define TPS6507X_REG_CON_CTRL3 0X0F
-#define TPS6507X_REG_DEFDCDC1 0X10
-#define TPS6507X_REG_DEFDCDC2_LOW 0X11
-#define TPS6507X_REG_DEFDCDC2_HIGH 0X12
-#define TPS6507X_REG_DEFDCDC3_LOW 0X13
-#define TPS6507X_REG_DEFDCDC3_HIGH 0X14
-#define TPS6507X_REG_DEFSLEW 0X15
-#define TPS6507X_REG_LDO_CTRL1 0X16
-#define TPS6507X_REG_DEFLDO2 0X17
-#define TPS6507X_REG_WLED_CTRL1 0X18
-#define TPS6507X_REG_WLED_CTRL2 0X19
-
-/* CON_CTRL1 bitfields */
-#define TPS6507X_CON_CTRL1_DCDC1_ENABLE BIT(4)
-#define TPS6507X_CON_CTRL1_DCDC2_ENABLE BIT(3)
-#define TPS6507X_CON_CTRL1_DCDC3_ENABLE BIT(2)
-#define TPS6507X_CON_CTRL1_LDO1_ENABLE BIT(1)
-#define TPS6507X_CON_CTRL1_LDO2_ENABLE BIT(0)
-
-/* DEFDCDC1 bitfields */
-#define TPS6507X_DEFDCDC1_DCDC1_EXT_ADJ_EN BIT(7)
-#define TPS6507X_DEFDCDC1_DCDC1_MASK 0X3F
-
-/* DEFDCDC2_LOW bitfields */
-#define TPS6507X_DEFDCDC2_LOW_DCDC2_MASK 0X3F
-
-/* DEFDCDC2_HIGH bitfields */
-#define TPS6507X_DEFDCDC2_HIGH_DCDC2_MASK 0X3F
-
-/* DEFDCDC3_LOW bitfields */
-#define TPS6507X_DEFDCDC3_LOW_DCDC3_MASK 0X3F
-
-/* DEFDCDC3_HIGH bitfields */
-#define TPS6507X_DEFDCDC3_HIGH_DCDC3_MASK 0X3F
-
-/* TPS6507X_REG_LDO_CTRL1 bitfields */
-#define TPS6507X_REG_LDO_CTRL1_LDO1_MASK 0X0F
-
-/* TPS6507X_REG_DEFLDO2 bitfields */
-#define TPS6507X_REG_DEFLDO2_LDO2_MASK 0X3F
-
-/* VDCDC MASK */
-#define TPS6507X_DEFDCDCX_DCDC_MASK 0X3F
+#include <linux/mfd/tps6507x.h>
/* DCDC's */
#define TPS6507X_DCDC_1 0
@@ -162,474 +103,7 @@
const u16 *table;
};
-struct tps_pmic {
- struct regulator_desc desc[TPS6507X_NUM_REGULATOR];
- struct i2c_client *client;
- struct regulator_dev *rdev[TPS6507X_NUM_REGULATOR];
- const struct tps_info *info[TPS6507X_NUM_REGULATOR];
- struct mutex io_lock;
-};
-
-static inline int tps_6507x_read(struct tps_pmic *tps, u8 reg)
-{
- return i2c_smbus_read_byte_data(tps->client, reg);
-}
-
-static inline int tps_6507x_write(struct tps_pmic *tps, u8 reg, u8 val)
-{
- return i2c_smbus_write_byte_data(tps->client, reg, val);
-}
-
-static int tps_6507x_set_bits(struct tps_pmic *tps, u8 reg, u8 mask)
-{
- int err, data;
-
- mutex_lock(&tps->io_lock);
-
- data = tps_6507x_read(tps, reg);
- if (data < 0) {
- dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg);
- err = data;
- goto out;
- }
-
- data |= mask;
- err = tps_6507x_write(tps, reg, data);
- if (err)
- dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg);
-
-out:
- mutex_unlock(&tps->io_lock);
- return err;
-}
-
-static int tps_6507x_clear_bits(struct tps_pmic *tps, u8 reg, u8 mask)
-{
- int err, data;
-
- mutex_lock(&tps->io_lock);
-
- data = tps_6507x_read(tps, reg);
- if (data < 0) {
- dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg);
- err = data;
- goto out;
- }
-
- data &= ~mask;
- err = tps_6507x_write(tps, reg, data);
- if (err)
- dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg);
-
-out:
- mutex_unlock(&tps->io_lock);
- return err;
-}
-
-static int tps_6507x_reg_read(struct tps_pmic *tps, u8 reg)
-{
- int data;
-
- mutex_lock(&tps->io_lock);
-
- data = tps_6507x_read(tps, reg);
- if (data < 0)
- dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg);
-
- mutex_unlock(&tps->io_lock);
- return data;
-}
-
-static int tps_6507x_reg_write(struct tps_pmic *tps, u8 reg, u8 val)
-{
- int err;
-
- mutex_lock(&tps->io_lock);
-
- err = tps_6507x_write(tps, reg, val);
- if (err < 0)
- dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg);
-
- mutex_unlock(&tps->io_lock);
- return err;
-}
-
-static int tps6507x_dcdc_is_enabled(struct regulator_dev *dev)
-{
- struct tps_pmic *tps = rdev_get_drvdata(dev);
- int data, dcdc = rdev_get_id(dev);
- u8 shift;
-
- if (dcdc < TPS6507X_DCDC_1 || dcdc > TPS6507X_DCDC_3)
- return -EINVAL;
-
- shift = TPS6507X_MAX_REG_ID - dcdc;
- data = tps_6507x_reg_read(tps, TPS6507X_REG_CON_CTRL1);
-
- if (data < 0)
- return data;
- else
- return (data & 1<<shift) ? 1 : 0;
-}
-
-static int tps6507x_ldo_is_enabled(struct regulator_dev *dev)
-{
- struct tps_pmic *tps = rdev_get_drvdata(dev);
- int data, ldo = rdev_get_id(dev);
- u8 shift;
-
- if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2)
- return -EINVAL;
-
- shift = TPS6507X_MAX_REG_ID - ldo;
- data = tps_6507x_reg_read(tps, TPS6507X_REG_CON_CTRL1);
-
- if (data < 0)
- return data;
- else
- return (data & 1<<shift) ? 1 : 0;
-}
-
-static int tps6507x_dcdc_enable(struct regulator_dev *dev)
-{
- struct tps_pmic *tps = rdev_get_drvdata(dev);
- int dcdc = rdev_get_id(dev);
- u8 shift;
-
- if (dcdc < TPS6507X_DCDC_1 || dcdc > TPS6507X_DCDC_3)
- return -EINVAL;
-
- shift = TPS6507X_MAX_REG_ID - dcdc;
- return tps_6507x_set_bits(tps, TPS6507X_REG_CON_CTRL1, 1 << shift);
-}
-
-static int tps6507x_dcdc_disable(struct regulator_dev *dev)
-{
- struct tps_pmic *tps = rdev_get_drvdata(dev);
- int dcdc = rdev_get_id(dev);
- u8 shift;
-
- if (dcdc < TPS6507X_DCDC_1 || dcdc > TPS6507X_DCDC_3)
- return -EINVAL;
-
- shift = TPS6507X_MAX_REG_ID - dcdc;
- return tps_6507x_clear_bits(tps, TPS6507X_REG_CON_CTRL1, 1 << shift);
-}
-
-static int tps6507x_ldo_enable(struct regulator_dev *dev)
-{
- struct tps_pmic *tps = rdev_get_drvdata(dev);
- int ldo = rdev_get_id(dev);
- u8 shift;
-
- if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2)
- return -EINVAL;
-
- shift = TPS6507X_MAX_REG_ID - ldo;
- return tps_6507x_set_bits(tps, TPS6507X_REG_CON_CTRL1, 1 << shift);
-}
-
-static int tps6507x_ldo_disable(struct regulator_dev *dev)
-{
- struct tps_pmic *tps = rdev_get_drvdata(dev);
- int ldo = rdev_get_id(dev);
- u8 shift;
-
- if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2)
- return -EINVAL;
-
- shift = TPS6507X_MAX_REG_ID - ldo;
- return tps_6507x_clear_bits(tps, TPS6507X_REG_CON_CTRL1, 1 << shift);
-}
-
-static int tps6507x_dcdc_get_voltage(struct regulator_dev *dev)
-{
- struct tps_pmic *tps = rdev_get_drvdata(dev);
- int data, dcdc = rdev_get_id(dev);
- u8 reg;
-
- switch (dcdc) {
- case TPS6507X_DCDC_1:
- reg = TPS6507X_REG_DEFDCDC1;
- break;
- case TPS6507X_DCDC_2:
- reg = TPS6507X_REG_DEFDCDC2_LOW;
- break;
- case TPS6507X_DCDC_3:
- reg = TPS6507X_REG_DEFDCDC3_LOW;
- break;
- default:
- return -EINVAL;
- }
-
- data = tps_6507x_reg_read(tps, reg);
- if (data < 0)
- return data;
-
- data &= TPS6507X_DEFDCDCX_DCDC_MASK;
- return tps->info[dcdc]->table[data] * 1000;
-}
-
-static int tps6507x_dcdc_set_voltage(struct regulator_dev *dev,
- int min_uV, int max_uV)
-{
- struct tps_pmic *tps = rdev_get_drvdata(dev);
- int data, vsel, dcdc = rdev_get_id(dev);
- u8 reg;
-
- switch (dcdc) {
- case TPS6507X_DCDC_1:
- reg = TPS6507X_REG_DEFDCDC1;
- break;
- case TPS6507X_DCDC_2:
- reg = TPS6507X_REG_DEFDCDC2_LOW;
- break;
- case TPS6507X_DCDC_3:
- reg = TPS6507X_REG_DEFDCDC3_LOW;
- break;
- default:
- return -EINVAL;
- }
-
- if (min_uV < tps->info[dcdc]->min_uV
- || min_uV > tps->info[dcdc]->max_uV)
- return -EINVAL;
- if (max_uV < tps->info[dcdc]->min_uV
- || max_uV > tps->info[dcdc]->max_uV)
- return -EINVAL;
-
- for (vsel = 0; vsel < tps->info[dcdc]->table_len; vsel++) {
- int mV = tps->info[dcdc]->table[vsel];
- int uV = mV * 1000;
-
- /* Break at the first in-range value */
- if (min_uV <= uV && uV <= max_uV)
- break;
- }
-
- /* write to the register in case we found a match */
- if (vsel == tps->info[dcdc]->table_len)
- return -EINVAL;
-
- data = tps_6507x_reg_read(tps, reg);
- if (data < 0)
- return data;
-
- data &= ~TPS6507X_DEFDCDCX_DCDC_MASK;
- data |= vsel;
-
- return tps_6507x_reg_write(tps, reg, data);
-}
-
-static int tps6507x_ldo_get_voltage(struct regulator_dev *dev)
-{
- struct tps_pmic *tps = rdev_get_drvdata(dev);
- int data, ldo = rdev_get_id(dev);
- u8 reg, mask;
-
- if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2)
- return -EINVAL;
- else {
- reg = (ldo == TPS6507X_LDO_1 ?
- TPS6507X_REG_LDO_CTRL1 : TPS6507X_REG_DEFLDO2);
- mask = (ldo == TPS6507X_LDO_1 ?
- TPS6507X_REG_LDO_CTRL1_LDO1_MASK :
- TPS6507X_REG_DEFLDO2_LDO2_MASK);
- }
-
- data = tps_6507x_reg_read(tps, reg);
- if (data < 0)
- return data;
-
- data &= mask;
- return tps->info[ldo]->table[data] * 1000;
-}
-
-static int tps6507x_ldo_set_voltage(struct regulator_dev *dev,
- int min_uV, int max_uV)
-{
- struct tps_pmic *tps = rdev_get_drvdata(dev);
- int data, vsel, ldo = rdev_get_id(dev);
- u8 reg, mask;
-
- if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2)
- return -EINVAL;
- else {
- reg = (ldo == TPS6507X_LDO_1 ?
- TPS6507X_REG_LDO_CTRL1 : TPS6507X_REG_DEFLDO2);
- mask = (ldo == TPS6507X_LDO_1 ?
- TPS6507X_REG_LDO_CTRL1_LDO1_MASK :
- TPS6507X_REG_DEFLDO2_LDO2_MASK);
- }
-
- if (min_uV < tps->info[ldo]->min_uV || min_uV > tps->info[ldo]->max_uV)
- return -EINVAL;
- if (max_uV < tps->info[ldo]->min_uV || max_uV > tps->info[ldo]->max_uV)
- return -EINVAL;
-
- for (vsel = 0; vsel < tps->info[ldo]->table_len; vsel++) {
- int mV = tps->info[ldo]->table[vsel];
- int uV = mV * 1000;
-
- /* Break at the first in-range value */
- if (min_uV <= uV && uV <= max_uV)
- break;
- }
-
- if (vsel == tps->info[ldo]->table_len)
- return -EINVAL;
-
- data = tps_6507x_reg_read(tps, reg);
- if (data < 0)
- return data;
-
- data &= ~mask;
- data |= vsel;
-
- return tps_6507x_reg_write(tps, reg, data);
-}
-
-static int tps6507x_dcdc_list_voltage(struct regulator_dev *dev,
- unsigned selector)
-{
- struct tps_pmic *tps = rdev_get_drvdata(dev);
- int dcdc = rdev_get_id(dev);
-
- if (dcdc < TPS6507X_DCDC_1 || dcdc > TPS6507X_DCDC_3)
- return -EINVAL;
-
- if (selector >= tps->info[dcdc]->table_len)
- return -EINVAL;
- else
- return tps->info[dcdc]->table[selector] * 1000;
-}
-
-static int tps6507x_ldo_list_voltage(struct regulator_dev *dev,
- unsigned selector)
-{
- struct tps_pmic *tps = rdev_get_drvdata(dev);
- int ldo = rdev_get_id(dev);
-
- if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2)
- return -EINVAL;
-
- if (selector >= tps->info[ldo]->table_len)
- return -EINVAL;
- else
- return tps->info[ldo]->table[selector] * 1000;
-}
-
-/* Operations permitted on VDCDCx */
-static struct regulator_ops tps6507x_dcdc_ops = {
- .is_enabled = tps6507x_dcdc_is_enabled,
- .enable = tps6507x_dcdc_enable,
- .disable = tps6507x_dcdc_disable,
- .get_voltage = tps6507x_dcdc_get_voltage,
- .set_voltage = tps6507x_dcdc_set_voltage,
- .list_voltage = tps6507x_dcdc_list_voltage,
-};
-
-/* Operations permitted on LDOx */
-static struct regulator_ops tps6507x_ldo_ops = {
- .is_enabled = tps6507x_ldo_is_enabled,
- .enable = tps6507x_ldo_enable,
- .disable = tps6507x_ldo_disable,
- .get_voltage = tps6507x_ldo_get_voltage,
- .set_voltage = tps6507x_ldo_set_voltage,
- .list_voltage = tps6507x_ldo_list_voltage,
-};
-
-static int __devinit tps_6507x_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- static int desc_id;
- const struct tps_info *info = (void *)id->driver_data;
- struct regulator_init_data *init_data;
- struct regulator_dev *rdev;
- struct tps_pmic *tps;
- int i;
- int error;
-
- if (!i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_BYTE_DATA))
- return -EIO;
-
- /**
- * init_data points to array of regulator_init structures
- * coming from the board-evm file.
- */
- init_data = client->dev.platform_data;
- if (!init_data)
- return -EIO;
-
- tps = kzalloc(sizeof(*tps), GFP_KERNEL);
- if (!tps)
- return -ENOMEM;
-
- mutex_init(&tps->io_lock);
-
- /* common for all regulators */
- tps->client = client;
-
- for (i = 0; i < TPS6507X_NUM_REGULATOR; i++, info++, init_data++) {
- /* Register the regulators */
- tps->info[i] = info;
- tps->desc[i].name = info->name;
- tps->desc[i].id = desc_id++;
- tps->desc[i].n_voltages = num_voltages[i];
- tps->desc[i].ops = (i > TPS6507X_DCDC_3 ?
- &tps6507x_ldo_ops : &tps6507x_dcdc_ops);
- tps->desc[i].type = REGULATOR_VOLTAGE;
- tps->desc[i].owner = THIS_MODULE;
-
- rdev = regulator_register(&tps->desc[i],
- &client->dev, init_data, tps);
- if (IS_ERR(rdev)) {
- dev_err(&client->dev, "failed to register %s\n",
- id->name);
- error = PTR_ERR(rdev);
- goto fail;
- }
-
- /* Save regulator for cleanup */
- tps->rdev[i] = rdev;
- }
-
- i2c_set_clientdata(client, tps);
-
- return 0;
-
-fail:
- while (--i >= 0)
- regulator_unregister(tps->rdev[i]);
-
- kfree(tps);
- return error;
-}
-
-/**
- * tps_6507x_remove - TPS6507x driver i2c remove handler
- * @client: i2c driver client device structure
- *
- * Unregister TPS driver as an i2c client device driver
- */
-static int __devexit tps_6507x_remove(struct i2c_client *client)
-{
- struct tps_pmic *tps = i2c_get_clientdata(client);
- int i;
-
- /* clear the client data in i2c */
- i2c_set_clientdata(client, NULL);
-
- for (i = 0; i < TPS6507X_NUM_REGULATOR; i++)
- regulator_unregister(tps->rdev[i]);
-
- kfree(tps);
-
- return 0;
-}
-
-static const struct tps_info tps6507x_regs[] = {
+static const struct tps_info tps6507x_pmic_regs[] = {
{
.name = "VDCDC1",
.min_uV = 725000,
@@ -667,45 +141,520 @@
},
};
-static const struct i2c_device_id tps_6507x_id[] = {
- {.name = "tps6507x",
- .driver_data = (unsigned long) tps6507x_regs,},
- { },
+struct tps6507x_pmic {
+ struct regulator_desc desc[TPS6507X_NUM_REGULATOR];
+ struct tps6507x_dev *mfd;
+ struct regulator_dev *rdev[TPS6507X_NUM_REGULATOR];
+ const struct tps_info *info[TPS6507X_NUM_REGULATOR];
+ struct mutex io_lock;
};
-MODULE_DEVICE_TABLE(i2c, tps_6507x_id);
+static inline int tps6507x_pmic_read(struct tps6507x_pmic *tps, u8 reg)
+{
+ u8 val;
+ int err;
-static struct i2c_driver tps_6507x_i2c_driver = {
+ err = tps->mfd->read_dev(tps->mfd, reg, 1, &val);
+
+ if (err)
+ return err;
+
+ return val;
+}
+
+static inline int tps6507x_pmic_write(struct tps6507x_pmic *tps, u8 reg, u8 val)
+{
+ return tps->mfd->write_dev(tps->mfd, reg, 1, &val);
+}
+
+static int tps6507x_pmic_set_bits(struct tps6507x_pmic *tps, u8 reg, u8 mask)
+{
+ int err, data;
+
+ mutex_lock(&tps->io_lock);
+
+ data = tps6507x_pmic_read(tps, reg);
+ if (data < 0) {
+ dev_err(tps->mfd->dev, "Read from reg 0x%x failed\n", reg);
+ err = data;
+ goto out;
+ }
+
+ data |= mask;
+ err = tps6507x_pmic_write(tps, reg, data);
+ if (err)
+ dev_err(tps->mfd->dev, "Write for reg 0x%x failed\n", reg);
+
+out:
+ mutex_unlock(&tps->io_lock);
+ return err;
+}
+
+static int tps6507x_pmic_clear_bits(struct tps6507x_pmic *tps, u8 reg, u8 mask)
+{
+ int err, data;
+
+ mutex_lock(&tps->io_lock);
+
+ data = tps6507x_pmic_read(tps, reg);
+ if (data < 0) {
+ dev_err(tps->mfd->dev, "Read from reg 0x%x failed\n", reg);
+ err = data;
+ goto out;
+ }
+
+ data &= ~mask;
+ err = tps6507x_pmic_write(tps, reg, data);
+ if (err)
+ dev_err(tps->mfd->dev, "Write for reg 0x%x failed\n", reg);
+
+out:
+ mutex_unlock(&tps->io_lock);
+ return err;
+}
+
+static int tps6507x_pmic_reg_read(struct tps6507x_pmic *tps, u8 reg)
+{
+ int data;
+
+ mutex_lock(&tps->io_lock);
+
+ data = tps6507x_pmic_read(tps, reg);
+ if (data < 0)
+ dev_err(tps->mfd->dev, "Read from reg 0x%x failed\n", reg);
+
+ mutex_unlock(&tps->io_lock);
+ return data;
+}
+
+static int tps6507x_pmic_reg_write(struct tps6507x_pmic *tps, u8 reg, u8 val)
+{
+ int err;
+
+ mutex_lock(&tps->io_lock);
+
+ err = tps6507x_pmic_write(tps, reg, val);
+ if (err < 0)
+ dev_err(tps->mfd->dev, "Write for reg 0x%x failed\n", reg);
+
+ mutex_unlock(&tps->io_lock);
+ return err;
+}
+
+static int tps6507x_pmic_dcdc_is_enabled(struct regulator_dev *dev)
+{
+ struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
+ int data, dcdc = rdev_get_id(dev);
+ u8 shift;
+
+ if (dcdc < TPS6507X_DCDC_1 || dcdc > TPS6507X_DCDC_3)
+ return -EINVAL;
+
+ shift = TPS6507X_MAX_REG_ID - dcdc;
+ data = tps6507x_pmic_reg_read(tps, TPS6507X_REG_CON_CTRL1);
+
+ if (data < 0)
+ return data;
+ else
+ return (data & 1<<shift) ? 1 : 0;
+}
+
+static int tps6507x_pmic_ldo_is_enabled(struct regulator_dev *dev)
+{
+ struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
+ int data, ldo = rdev_get_id(dev);
+ u8 shift;
+
+ if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2)
+ return -EINVAL;
+
+ shift = TPS6507X_MAX_REG_ID - ldo;
+ data = tps6507x_pmic_reg_read(tps, TPS6507X_REG_CON_CTRL1);
+
+ if (data < 0)
+ return data;
+ else
+ return (data & 1<<shift) ? 1 : 0;
+}
+
+static int tps6507x_pmic_dcdc_enable(struct regulator_dev *dev)
+{
+ struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
+ int dcdc = rdev_get_id(dev);
+ u8 shift;
+
+ if (dcdc < TPS6507X_DCDC_1 || dcdc > TPS6507X_DCDC_3)
+ return -EINVAL;
+
+ shift = TPS6507X_MAX_REG_ID - dcdc;
+ return tps6507x_pmic_set_bits(tps, TPS6507X_REG_CON_CTRL1, 1 << shift);
+}
+
+static int tps6507x_pmic_dcdc_disable(struct regulator_dev *dev)
+{
+ struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
+ int dcdc = rdev_get_id(dev);
+ u8 shift;
+
+ if (dcdc < TPS6507X_DCDC_1 || dcdc > TPS6507X_DCDC_3)
+ return -EINVAL;
+
+ shift = TPS6507X_MAX_REG_ID - dcdc;
+ return tps6507x_pmic_clear_bits(tps, TPS6507X_REG_CON_CTRL1,
+ 1 << shift);
+}
+
+static int tps6507x_pmic_ldo_enable(struct regulator_dev *dev)
+{
+ struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
+ int ldo = rdev_get_id(dev);
+ u8 shift;
+
+ if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2)
+ return -EINVAL;
+
+ shift = TPS6507X_MAX_REG_ID - ldo;
+ return tps6507x_pmic_set_bits(tps, TPS6507X_REG_CON_CTRL1, 1 << shift);
+}
+
+static int tps6507x_pmic_ldo_disable(struct regulator_dev *dev)
+{
+ struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
+ int ldo = rdev_get_id(dev);
+ u8 shift;
+
+ if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2)
+ return -EINVAL;
+
+ shift = TPS6507X_MAX_REG_ID - ldo;
+ return tps6507x_pmic_clear_bits(tps, TPS6507X_REG_CON_CTRL1,
+ 1 << shift);
+}
+
+static int tps6507x_pmic_dcdc_get_voltage(struct regulator_dev *dev)
+{
+ struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
+ int data, dcdc = rdev_get_id(dev);
+ u8 reg;
+
+ switch (dcdc) {
+ case TPS6507X_DCDC_1:
+ reg = TPS6507X_REG_DEFDCDC1;
+ break;
+ case TPS6507X_DCDC_2:
+ reg = TPS6507X_REG_DEFDCDC2_LOW;
+ break;
+ case TPS6507X_DCDC_3:
+ reg = TPS6507X_REG_DEFDCDC3_LOW;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ data = tps6507x_pmic_reg_read(tps, reg);
+ if (data < 0)
+ return data;
+
+ data &= TPS6507X_DEFDCDCX_DCDC_MASK;
+ return tps->info[dcdc]->table[data] * 1000;
+}
+
+static int tps6507x_pmic_dcdc_set_voltage(struct regulator_dev *dev,
+ int min_uV, int max_uV)
+{
+ struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
+ int data, vsel, dcdc = rdev_get_id(dev);
+ u8 reg;
+
+ switch (dcdc) {
+ case TPS6507X_DCDC_1:
+ reg = TPS6507X_REG_DEFDCDC1;
+ break;
+ case TPS6507X_DCDC_2:
+ reg = TPS6507X_REG_DEFDCDC2_LOW;
+ break;
+ case TPS6507X_DCDC_3:
+ reg = TPS6507X_REG_DEFDCDC3_LOW;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (min_uV < tps->info[dcdc]->min_uV
+ || min_uV > tps->info[dcdc]->max_uV)
+ return -EINVAL;
+ if (max_uV < tps->info[dcdc]->min_uV
+ || max_uV > tps->info[dcdc]->max_uV)
+ return -EINVAL;
+
+ for (vsel = 0; vsel < tps->info[dcdc]->table_len; vsel++) {
+ int mV = tps->info[dcdc]->table[vsel];
+ int uV = mV * 1000;
+
+ /* Break at the first in-range value */
+ if (min_uV <= uV && uV <= max_uV)
+ break;
+ }
+
+ /* write to the register in case we found a match */
+ if (vsel == tps->info[dcdc]->table_len)
+ return -EINVAL;
+
+ data = tps6507x_pmic_reg_read(tps, reg);
+ if (data < 0)
+ return data;
+
+ data &= ~TPS6507X_DEFDCDCX_DCDC_MASK;
+ data |= vsel;
+
+ return tps6507x_pmic_reg_write(tps, reg, data);
+}
+
+static int tps6507x_pmic_ldo_get_voltage(struct regulator_dev *dev)
+{
+ struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
+ int data, ldo = rdev_get_id(dev);
+ u8 reg, mask;
+
+ if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2)
+ return -EINVAL;
+ else {
+ reg = (ldo == TPS6507X_LDO_1 ?
+ TPS6507X_REG_LDO_CTRL1 : TPS6507X_REG_DEFLDO2);
+ mask = (ldo == TPS6507X_LDO_1 ?
+ TPS6507X_REG_LDO_CTRL1_LDO1_MASK :
+ TPS6507X_REG_DEFLDO2_LDO2_MASK);
+ }
+
+ data = tps6507x_pmic_reg_read(tps, reg);
+ if (data < 0)
+ return data;
+
+ data &= mask;
+ return tps->info[ldo]->table[data] * 1000;
+}
+
+static int tps6507x_pmic_ldo_set_voltage(struct regulator_dev *dev,
+ int min_uV, int max_uV)
+{
+ struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
+ int data, vsel, ldo = rdev_get_id(dev);
+ u8 reg, mask;
+
+ if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2)
+ return -EINVAL;
+ else {
+ reg = (ldo == TPS6507X_LDO_1 ?
+ TPS6507X_REG_LDO_CTRL1 : TPS6507X_REG_DEFLDO2);
+ mask = (ldo == TPS6507X_LDO_1 ?
+ TPS6507X_REG_LDO_CTRL1_LDO1_MASK :
+ TPS6507X_REG_DEFLDO2_LDO2_MASK);
+ }
+
+ if (min_uV < tps->info[ldo]->min_uV || min_uV > tps->info[ldo]->max_uV)
+ return -EINVAL;
+ if (max_uV < tps->info[ldo]->min_uV || max_uV > tps->info[ldo]->max_uV)
+ return -EINVAL;
+
+ for (vsel = 0; vsel < tps->info[ldo]->table_len; vsel++) {
+ int mV = tps->info[ldo]->table[vsel];
+ int uV = mV * 1000;
+
+ /* Break at the first in-range value */
+ if (min_uV <= uV && uV <= max_uV)
+ break;
+ }
+
+ if (vsel == tps->info[ldo]->table_len)
+ return -EINVAL;
+
+ data = tps6507x_pmic_reg_read(tps, reg);
+ if (data < 0)
+ return data;
+
+ data &= ~mask;
+ data |= vsel;
+
+ return tps6507x_pmic_reg_write(tps, reg, data);
+}
+
+static int tps6507x_pmic_dcdc_list_voltage(struct regulator_dev *dev,
+ unsigned selector)
+{
+ struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
+ int dcdc = rdev_get_id(dev);
+
+ if (dcdc < TPS6507X_DCDC_1 || dcdc > TPS6507X_DCDC_3)
+ return -EINVAL;
+
+ if (selector >= tps->info[dcdc]->table_len)
+ return -EINVAL;
+ else
+ return tps->info[dcdc]->table[selector] * 1000;
+}
+
+static int tps6507x_pmic_ldo_list_voltage(struct regulator_dev *dev,
+ unsigned selector)
+{
+ struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
+ int ldo = rdev_get_id(dev);
+
+ if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2)
+ return -EINVAL;
+
+ if (selector >= tps->info[ldo]->table_len)
+ return -EINVAL;
+ else
+ return tps->info[ldo]->table[selector] * 1000;
+}
+
+/* Operations permitted on VDCDCx */
+static struct regulator_ops tps6507x_pmic_dcdc_ops = {
+ .is_enabled = tps6507x_pmic_dcdc_is_enabled,
+ .enable = tps6507x_pmic_dcdc_enable,
+ .disable = tps6507x_pmic_dcdc_disable,
+ .get_voltage = tps6507x_pmic_dcdc_get_voltage,
+ .set_voltage = tps6507x_pmic_dcdc_set_voltage,
+ .list_voltage = tps6507x_pmic_dcdc_list_voltage,
+};
+
+/* Operations permitted on LDOx */
+static struct regulator_ops tps6507x_pmic_ldo_ops = {
+ .is_enabled = tps6507x_pmic_ldo_is_enabled,
+ .enable = tps6507x_pmic_ldo_enable,
+ .disable = tps6507x_pmic_ldo_disable,
+ .get_voltage = tps6507x_pmic_ldo_get_voltage,
+ .set_voltage = tps6507x_pmic_ldo_set_voltage,
+ .list_voltage = tps6507x_pmic_ldo_list_voltage,
+};
+
+static __devinit
+int tps6507x_pmic_probe(struct platform_device *pdev)
+{
+ struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
+ static int desc_id;
+ const struct tps_info *info = &tps6507x_pmic_regs[0];
+ struct regulator_init_data *init_data;
+ struct regulator_dev *rdev;
+ struct tps6507x_pmic *tps;
+ struct tps6507x_board *tps_board;
+ int i;
+ int error;
+
+ /**
+ * tps_board points to pmic related constants
+ * coming from the board-evm file.
+ */
+
+ tps_board = dev_get_platdata(tps6507x_dev->dev);
+ if (!tps_board)
+ return -EINVAL;
+
+ /**
+ * init_data points to array of regulator_init structures
+ * coming from the board-evm file.
+ */
+ init_data = tps_board->tps6507x_pmic_init_data;
+ if (!init_data)
+ return -EINVAL;
+
+ tps = kzalloc(sizeof(*tps), GFP_KERNEL);
+ if (!tps)
+ return -ENOMEM;
+
+ mutex_init(&tps->io_lock);
+
+ /* common for all regulators */
+ tps->mfd = tps6507x_dev;
+
+ for (i = 0; i < TPS6507X_NUM_REGULATOR; i++, info++, init_data++) {
+ /* Register the regulators */
+ tps->info[i] = info;
+ tps->desc[i].name = info->name;
+ tps->desc[i].id = desc_id++;
+ tps->desc[i].n_voltages = num_voltages[i];
+ tps->desc[i].ops = (i > TPS6507X_DCDC_3 ?
+ &tps6507x_pmic_ldo_ops : &tps6507x_pmic_dcdc_ops);
+ tps->desc[i].type = REGULATOR_VOLTAGE;
+ tps->desc[i].owner = THIS_MODULE;
+
+ rdev = regulator_register(&tps->desc[i],
+ tps6507x_dev->dev, init_data, tps);
+ if (IS_ERR(rdev)) {
+ dev_err(tps6507x_dev->dev,
+ "failed to register %s regulator\n",
+ pdev->name);
+ error = PTR_ERR(rdev);
+ goto fail;
+ }
+
+ /* Save regulator for cleanup */
+ tps->rdev[i] = rdev;
+ }
+
+ tps6507x_dev->pmic = tps;
+
+ return 0;
+
+fail:
+ while (--i >= 0)
+ regulator_unregister(tps->rdev[i]);
+
+ kfree(tps);
+ return error;
+}
+
+/**
+ * tps6507x_remove - TPS6507x driver i2c remove handler
+ * @client: i2c driver client device structure
+ *
+ * Unregister TPS driver as an i2c client device driver
+ */
+static int __devexit tps6507x_pmic_remove(struct platform_device *pdev)
+{
+ struct tps6507x_dev *tps6507x_dev = platform_get_drvdata(pdev);
+ struct tps6507x_pmic *tps = tps6507x_dev->pmic;
+ int i;
+
+ for (i = 0; i < TPS6507X_NUM_REGULATOR; i++)
+ regulator_unregister(tps->rdev[i]);
+
+ kfree(tps);
+
+ return 0;
+}
+
+static struct platform_driver tps6507x_pmic_driver = {
.driver = {
- .name = "tps6507x",
+ .name = "tps6507x-pmic",
.owner = THIS_MODULE,
},
- .probe = tps_6507x_probe,
- .remove = __devexit_p(tps_6507x_remove),
- .id_table = tps_6507x_id,
+ .probe = tps6507x_pmic_probe,
+ .remove = __devexit_p(tps6507x_pmic_remove),
};
/**
- * tps_6507x_init
+ * tps6507x_pmic_init
*
* Module init function
*/
-static int __init tps_6507x_init(void)
+static int __init tps6507x_pmic_init(void)
{
- return i2c_add_driver(&tps_6507x_i2c_driver);
+ return platform_driver_register(&tps6507x_pmic_driver);
}
-subsys_initcall(tps_6507x_init);
+subsys_initcall(tps6507x_pmic_init);
/**
- * tps_6507x_cleanup
+ * tps6507x_pmic_cleanup
*
* Module exit function
*/
-static void __exit tps_6507x_cleanup(void)
+static void __exit tps6507x_pmic_cleanup(void)
{
- i2c_del_driver(&tps_6507x_i2c_driver);
+ platform_driver_unregister(&tps6507x_pmic_driver);
}
-module_exit(tps_6507x_cleanup);
+module_exit(tps6507x_pmic_cleanup);
MODULE_AUTHOR("Texas Instruments");
MODULE_DESCRIPTION("TPS6507x voltage regulator driver");
MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:tps6507x-pmic");
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index f159832..10ba12c 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -611,6 +611,13 @@
Select this to enable the ST-Ericsson AB3100 Mixed Signal IC RTC
support. This chip contains a battery- and capacitor-backed RTC.
+config RTC_DRV_AB8500
+ tristate "ST-Ericsson AB8500 RTC"
+ depends on AB8500_CORE
+ help
+ Select this to enable the ST-Ericsson AB8500 power management IC RTC
+ support. This chip contains a battery- and capacitor-backed RTC.
+
config RTC_DRV_NUC900
tristate "NUC910/NUC920 RTC driver"
depends on RTC_CLASS && ARCH_W90X900
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 245311a..5adbba7 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -18,6 +18,7 @@
# Keep the list ordered.
obj-$(CONFIG_RTC_DRV_AB3100) += rtc-ab3100.o
+obj-$(CONFIG_RTC_DRV_AB8500) += rtc-ab8500.o
obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o
obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o
diff --git a/drivers/rtc/rtc-ab3100.c b/drivers/rtc/rtc-ab3100.c
index 4704aac..d26780e 100644
--- a/drivers/rtc/rtc-ab3100.c
+++ b/drivers/rtc/rtc-ab3100.c
@@ -9,7 +9,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/rtc.h>
-#include <linux/mfd/ab3100.h>
+#include <linux/mfd/abx500.h>
/* Clock rate in Hz */
#define AB3100_RTC_CLOCK_RATE 32768
@@ -45,7 +45,6 @@
*/
static int ab3100_rtc_set_mmss(struct device *dev, unsigned long secs)
{
- struct ab3100 *ab3100_data = dev_get_drvdata(dev);
u8 regs[] = {AB3100_TI0, AB3100_TI1, AB3100_TI2,
AB3100_TI3, AB3100_TI4, AB3100_TI5};
unsigned char buf[6];
@@ -61,27 +60,26 @@
buf[5] = (fat_time >> 40) & 0xFF;
for (i = 0; i < 6; i++) {
- err = ab3100_set_register_interruptible(ab3100_data,
+ err = abx500_set_register_interruptible(dev, 0,
regs[i], buf[i]);
if (err)
return err;
}
/* Set the flag to mark that the clock is now set */
- return ab3100_mask_and_set_register_interruptible(ab3100_data,
+ return abx500_mask_and_set_register_interruptible(dev, 0,
AB3100_RTC,
- 0xFE, 0x01);
+ 0x01, 0x01);
}
static int ab3100_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
- struct ab3100 *ab3100_data = dev_get_drvdata(dev);
unsigned long time;
u8 rtcval;
int err;
- err = ab3100_get_register_interruptible(ab3100_data,
+ err = abx500_get_register_interruptible(dev, 0,
AB3100_RTC, &rtcval);
if (err)
return err;
@@ -94,7 +92,7 @@
u8 buf[6];
/* Read out time registers */
- err = ab3100_get_register_page_interruptible(ab3100_data,
+ err = abx500_get_register_page_interruptible(dev, 0,
AB3100_TI0,
buf, 6);
if (err != 0)
@@ -114,7 +112,6 @@
static int ab3100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
- struct ab3100 *ab3100_data = dev_get_drvdata(dev);
unsigned long time;
u64 fat_time;
u8 buf[6];
@@ -122,7 +119,7 @@
int err;
/* Figure out if alarm is enabled or not */
- err = ab3100_get_register_interruptible(ab3100_data,
+ err = abx500_get_register_interruptible(dev, 0,
AB3100_RTC, &rtcval);
if (err)
return err;
@@ -133,7 +130,7 @@
/* No idea how this could be represented */
alarm->pending = 0;
/* Read out alarm registers, only 4 bytes */
- err = ab3100_get_register_page_interruptible(ab3100_data,
+ err = abx500_get_register_page_interruptible(dev, 0,
AB3100_AL0, buf, 4);
if (err)
return err;
@@ -148,7 +145,6 @@
static int ab3100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
- struct ab3100 *ab3100_data = dev_get_drvdata(dev);
u8 regs[] = {AB3100_AL0, AB3100_AL1, AB3100_AL2, AB3100_AL3};
unsigned char buf[4];
unsigned long secs;
@@ -165,21 +161,19 @@
/* Set the alarm */
for (i = 0; i < 4; i++) {
- err = ab3100_set_register_interruptible(ab3100_data,
+ err = abx500_set_register_interruptible(dev, 0,
regs[i], buf[i]);
if (err)
return err;
}
/* Then enable the alarm */
- return ab3100_mask_and_set_register_interruptible(ab3100_data,
- AB3100_RTC, ~(1 << 2),
+ return abx500_mask_and_set_register_interruptible(dev, 0,
+ AB3100_RTC, (1 << 2),
alarm->enabled << 2);
}
static int ab3100_rtc_irq_enable(struct device *dev, unsigned int enabled)
{
- struct ab3100 *ab3100_data = dev_get_drvdata(dev);
-
/*
* It's not possible to enable/disable the alarm IRQ for this RTC.
* It does not actually trigger any IRQ: instead its only function is
@@ -188,12 +182,12 @@
* and need to be handled there instead.
*/
if (enabled)
- return ab3100_mask_and_set_register_interruptible(ab3100_data,
- AB3100_RTC, ~(1 << 2),
+ return abx500_mask_and_set_register_interruptible(dev, 0,
+ AB3100_RTC, (1 << 2),
1 << 2);
else
- return ab3100_mask_and_set_register_interruptible(ab3100_data,
- AB3100_RTC, ~(1 << 2),
+ return abx500_mask_and_set_register_interruptible(dev, 0,
+ AB3100_RTC, (1 << 2),
0);
}
@@ -210,10 +204,9 @@
int err;
u8 regval;
struct rtc_device *rtc;
- struct ab3100 *ab3100_data = platform_get_drvdata(pdev);
/* The first RTC register needs special treatment */
- err = ab3100_get_register_interruptible(ab3100_data,
+ err = abx500_get_register_interruptible(&pdev->dev, 0,
AB3100_RTC, ®val);
if (err) {
dev_err(&pdev->dev, "unable to read RTC register\n");
@@ -231,7 +224,7 @@
* This bit remains until RTC power is lost.
*/
regval = 1 | RTC_SETTING;
- err = ab3100_set_register_interruptible(ab3100_data,
+ err = abx500_set_register_interruptible(&pdev->dev, 0,
AB3100_RTC, regval);
/* Ignore any error on this write */
}
diff --git a/drivers/rtc/rtc-ab8500.c b/drivers/rtc/rtc-ab8500.c
new file mode 100644
index 0000000..2fda031
--- /dev/null
+++ b/drivers/rtc/rtc-ab8500.c
@@ -0,0 +1,363 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
+ *
+ * RTC clock driver for the RTC part of the AB8500 Power management chip.
+ * Based on RTC clock driver for the AB3100 Analog Baseband Chip by
+ * Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/mfd/ab8500.h>
+#include <linux/delay.h>
+
+#define AB8500_RTC_SOFF_STAT_REG 0x0F00
+#define AB8500_RTC_CC_CONF_REG 0x0F01
+#define AB8500_RTC_READ_REQ_REG 0x0F02
+#define AB8500_RTC_WATCH_TSECMID_REG 0x0F03
+#define AB8500_RTC_WATCH_TSECHI_REG 0x0F04
+#define AB8500_RTC_WATCH_TMIN_LOW_REG 0x0F05
+#define AB8500_RTC_WATCH_TMIN_MID_REG 0x0F06
+#define AB8500_RTC_WATCH_TMIN_HI_REG 0x0F07
+#define AB8500_RTC_ALRM_MIN_LOW_REG 0x0F08
+#define AB8500_RTC_ALRM_MIN_MID_REG 0x0F09
+#define AB8500_RTC_ALRM_MIN_HI_REG 0x0F0A
+#define AB8500_RTC_STAT_REG 0x0F0B
+#define AB8500_RTC_BKUP_CHG_REG 0x0F0C
+#define AB8500_RTC_FORCE_BKUP_REG 0x0F0D
+#define AB8500_RTC_CALIB_REG 0x0F0E
+#define AB8500_RTC_SWITCH_STAT_REG 0x0F0F
+#define AB8500_REV_REG 0x1080
+
+/* RtcReadRequest bits */
+#define RTC_READ_REQUEST 0x01
+#define RTC_WRITE_REQUEST 0x02
+
+/* RtcCtrl bits */
+#define RTC_ALARM_ENA 0x04
+#define RTC_STATUS_DATA 0x01
+
+#define COUNTS_PER_SEC (0xF000 / 60)
+#define AB8500_RTC_EPOCH 2000
+
+static const unsigned long ab8500_rtc_time_regs[] = {
+ AB8500_RTC_WATCH_TMIN_HI_REG, AB8500_RTC_WATCH_TMIN_MID_REG,
+ AB8500_RTC_WATCH_TMIN_LOW_REG, AB8500_RTC_WATCH_TSECHI_REG,
+ AB8500_RTC_WATCH_TSECMID_REG
+};
+
+static const unsigned long ab8500_rtc_alarm_regs[] = {
+ AB8500_RTC_ALRM_MIN_HI_REG, AB8500_RTC_ALRM_MIN_MID_REG,
+ AB8500_RTC_ALRM_MIN_LOW_REG
+};
+
+/* Calculate the seconds from 1970 to 01-01-2000 00:00:00 */
+static unsigned long get_elapsed_seconds(int year)
+{
+ unsigned long secs;
+ struct rtc_time tm = {
+ .tm_year = year - 1900,
+ .tm_mday = 1,
+ };
+
+ /*
+ * This function calculates secs from 1970 and not from
+ * 1900, even if we supply the offset from year 1900.
+ */
+ rtc_tm_to_time(&tm, &secs);
+ return secs;
+}
+
+static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
+ unsigned long timeout = jiffies + HZ;
+ int retval, i;
+ unsigned long mins, secs;
+ unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
+
+ /* Request a data read */
+ retval = ab8500_write(ab8500, AB8500_RTC_READ_REQ_REG,
+ RTC_READ_REQUEST);
+ if (retval < 0)
+ return retval;
+
+ /* Early AB8500 chips will not clear the rtc read request bit */
+ if (ab8500->revision == 0) {
+ msleep(1);
+ } else {
+ /* Wait for some cycles after enabling the rtc read in ab8500 */
+ while (time_before(jiffies, timeout)) {
+ retval = ab8500_read(ab8500, AB8500_RTC_READ_REQ_REG);
+ if (retval < 0)
+ return retval;
+
+ if (!(retval & RTC_READ_REQUEST))
+ break;
+
+ msleep(1);
+ }
+ }
+
+ /* Read the Watchtime registers */
+ for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
+ retval = ab8500_read(ab8500, ab8500_rtc_time_regs[i]);
+ if (retval < 0)
+ return retval;
+ buf[i] = retval;
+ }
+
+ mins = (buf[0] << 16) | (buf[1] << 8) | buf[2];
+
+ secs = (buf[3] << 8) | buf[4];
+ secs = secs / COUNTS_PER_SEC;
+ secs = secs + (mins * 60);
+
+ /* Add back the initially subtracted number of seconds */
+ secs += get_elapsed_seconds(AB8500_RTC_EPOCH);
+
+ rtc_time_to_tm(secs, tm);
+ return rtc_valid_tm(tm);
+}
+
+static int ab8500_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
+ int retval, i;
+ unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
+ unsigned long no_secs, no_mins, secs = 0;
+
+ if (tm->tm_year < (AB8500_RTC_EPOCH - 1900)) {
+ dev_dbg(dev, "year should be equal to or greater than %d\n",
+ AB8500_RTC_EPOCH);
+ return -EINVAL;
+ }
+
+ /* Get the number of seconds since 1970 */
+ rtc_tm_to_time(tm, &secs);
+
+ /*
+ * Convert it to the number of seconds since 01-01-2000 00:00:00, since
+ * we only have a small counter in the RTC.
+ */
+ secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
+
+ no_mins = secs / 60;
+
+ no_secs = secs % 60;
+ /* Make the seconds count as per the RTC resolution */
+ no_secs = no_secs * COUNTS_PER_SEC;
+
+ buf[4] = no_secs & 0xFF;
+ buf[3] = (no_secs >> 8) & 0xFF;
+
+ buf[2] = no_mins & 0xFF;
+ buf[1] = (no_mins >> 8) & 0xFF;
+ buf[0] = (no_mins >> 16) & 0xFF;
+
+ for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
+ retval = ab8500_write(ab8500, ab8500_rtc_time_regs[i], buf[i]);
+ if (retval < 0)
+ return retval;
+ }
+
+ /* Request a data write */
+ return ab8500_write(ab8500, AB8500_RTC_READ_REQ_REG, RTC_WRITE_REQUEST);
+}
+
+static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
+ int retval, i;
+ int rtc_ctrl;
+ unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
+ unsigned long secs, mins;
+
+ /* Check if the alarm is enabled or not */
+ rtc_ctrl = ab8500_read(ab8500, AB8500_RTC_STAT_REG);
+ if (rtc_ctrl < 0)
+ return rtc_ctrl;
+
+ if (rtc_ctrl & RTC_ALARM_ENA)
+ alarm->enabled = 1;
+ else
+ alarm->enabled = 0;
+
+ alarm->pending = 0;
+
+ for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
+ retval = ab8500_read(ab8500, ab8500_rtc_alarm_regs[i]);
+ if (retval < 0)
+ return retval;
+ buf[i] = retval;
+ }
+
+ mins = (buf[0] << 16) | (buf[1] << 8) | (buf[2]);
+ secs = mins * 60;
+
+ /* Add back the initially subtracted number of seconds */
+ secs += get_elapsed_seconds(AB8500_RTC_EPOCH);
+
+ rtc_time_to_tm(secs, &alarm->time);
+
+ return rtc_valid_tm(&alarm->time);
+}
+
+static int ab8500_rtc_irq_enable(struct device *dev, unsigned int enabled)
+{
+ struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
+
+ return ab8500_set_bits(ab8500, AB8500_RTC_STAT_REG, RTC_ALARM_ENA,
+ enabled ? RTC_ALARM_ENA : 0);
+}
+
+static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
+ int retval, i;
+ unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
+ unsigned long mins, secs = 0;
+
+ if (alarm->time.tm_year < (AB8500_RTC_EPOCH - 1900)) {
+ dev_dbg(dev, "year should be equal to or greater than %d\n",
+ AB8500_RTC_EPOCH);
+ return -EINVAL;
+ }
+
+ /* Get the number of seconds since 1970 */
+ rtc_tm_to_time(&alarm->time, &secs);
+
+ /*
+ * Convert it to the number of seconds since 01-01-2000 00:00:00, since
+ * we only have a small counter in the RTC.
+ */
+ secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
+
+ mins = secs / 60;
+
+ buf[2] = mins & 0xFF;
+ buf[1] = (mins >> 8) & 0xFF;
+ buf[0] = (mins >> 16) & 0xFF;
+
+ /* Set the alarm time */
+ for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
+ retval = ab8500_write(ab8500, ab8500_rtc_alarm_regs[i], buf[i]);
+ if (retval < 0)
+ return retval;
+ }
+
+ return ab8500_rtc_irq_enable(dev, alarm->enabled);
+}
+
+static irqreturn_t rtc_alarm_handler(int irq, void *data)
+{
+ struct rtc_device *rtc = data;
+ unsigned long events = RTC_IRQF | RTC_AF;
+
+ dev_dbg(&rtc->dev, "%s\n", __func__);
+ rtc_update_irq(rtc, 1, events);
+
+ return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops ab8500_rtc_ops = {
+ .read_time = ab8500_rtc_read_time,
+ .set_time = ab8500_rtc_set_time,
+ .read_alarm = ab8500_rtc_read_alarm,
+ .set_alarm = ab8500_rtc_set_alarm,
+ .alarm_irq_enable = ab8500_rtc_irq_enable,
+};
+
+static int __devinit ab8500_rtc_probe(struct platform_device *pdev)
+{
+ struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
+ int err;
+ struct rtc_device *rtc;
+ int rtc_ctrl;
+ int irq;
+
+ irq = platform_get_irq_byname(pdev, "ALARM");
+ if (irq < 0)
+ return irq;
+
+ /* For RTC supply test */
+ err = ab8500_set_bits(ab8500, AB8500_RTC_STAT_REG, RTC_STATUS_DATA,
+ RTC_STATUS_DATA);
+ if (err < 0)
+ return err;
+
+ /* Wait for reset by the PorRtc */
+ msleep(1);
+
+ rtc_ctrl = ab8500_read(ab8500, AB8500_RTC_STAT_REG);
+ if (rtc_ctrl < 0)
+ return rtc_ctrl;
+
+ /* Check if the RTC Supply fails */
+ if (!(rtc_ctrl & RTC_STATUS_DATA)) {
+ dev_err(&pdev->dev, "RTC supply failure\n");
+ return -ENODEV;
+ }
+
+ rtc = rtc_device_register("ab8500-rtc", &pdev->dev, &ab8500_rtc_ops,
+ THIS_MODULE);
+ if (IS_ERR(rtc)) {
+ dev_err(&pdev->dev, "Registration failed\n");
+ err = PTR_ERR(rtc);
+ return err;
+ }
+
+ err = request_threaded_irq(irq, NULL, rtc_alarm_handler, 0,
+ "ab8500-rtc", rtc);
+ if (err < 0) {
+ rtc_device_unregister(rtc);
+ return err;
+ }
+
+ platform_set_drvdata(pdev, rtc);
+
+ return 0;
+}
+
+static int __devexit ab8500_rtc_remove(struct platform_device *pdev)
+{
+ struct rtc_device *rtc = platform_get_drvdata(pdev);
+ int irq = platform_get_irq_byname(pdev, "ALARM");
+
+ free_irq(irq, rtc);
+ rtc_device_unregister(rtc);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver ab8500_rtc_driver = {
+ .driver = {
+ .name = "ab8500-rtc",
+ .owner = THIS_MODULE,
+ },
+ .probe = ab8500_rtc_probe,
+ .remove = __devexit_p(ab8500_rtc_remove),
+};
+
+static int __init ab8500_rtc_init(void)
+{
+ return platform_driver_register(&ab8500_rtc_driver);
+}
+
+static void __exit ab8500_rtc_exit(void)
+{
+ platform_driver_unregister(&ab8500_rtc_driver);
+}
+
+module_init(ab8500_rtc_init);
+module_exit(ab8500_rtc_exit);
+MODULE_AUTHOR("Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>");
+MODULE_DESCRIPTION("AB8500 RTC Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/rtc/rtc-davinci.c b/drivers/rtc/rtc-davinci.c
index 92a8f6c..34647fc 100644
--- a/drivers/rtc/rtc-davinci.c
+++ b/drivers/rtc/rtc-davinci.c
@@ -29,6 +29,7 @@
#include <linux/bcd.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/slab.h>
/*
* The DaVinci RTC is a simple RTC with the following
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index de033b7..d827ce5 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -777,7 +777,7 @@
read_rtc:
/* read RTC registers */
- tmp = ds1307->read_block_data(ds1307->client, 0, 8, buf);
+ tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf);
if (tmp != 8) {
pr_debug("read error %d\n", tmp);
err = -EIO;
@@ -862,7 +862,7 @@
if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
tmp += 12;
i2c_smbus_write_byte_data(client,
- DS1307_REG_HOUR,
+ ds1307->offset + DS1307_REG_HOUR,
bin2bcd(tmp));
}
diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c
index 6194573..1f0007f 100644
--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -403,7 +403,6 @@
free_irq(client->irq, client);
out_free:
- i2c_set_clientdata(client, NULL);
kfree(ds1374);
return ret;
}
@@ -422,7 +421,6 @@
}
rtc_device_unregister(ds1374->rtc);
- i2c_set_clientdata(client, NULL);
kfree(ds1374);
return 0;
}
diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index 038095d..6dc4e62 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -595,10 +595,6 @@
static ssize_t wdt_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
- /* Can't seek (pwrite) on this device
- if (ppos != &file->f_pos)
- return -ESPIPE;
- */
if (count) {
wdt_ping();
return 1;
@@ -707,7 +703,7 @@
*/
wdt_is_open = 1;
unlock_kernel();
- return 0;
+ return nonseekable_open(inode, file);
}
return -ENODEV;
}
diff --git a/drivers/rtc/rtc-mpc5121.c b/drivers/rtc/rtc-mpc5121.c
index f0dbf9c..db5d8c4 100644
--- a/drivers/rtc/rtc-mpc5121.c
+++ b/drivers/rtc/rtc-mpc5121.c
@@ -279,7 +279,7 @@
if (!rtc)
return -ENOMEM;
- rtc->regs = of_iomap(op->node, 0);
+ rtc->regs = of_iomap(op->dev.of_node, 0);
if (!rtc->regs) {
dev_err(&op->dev, "%s: couldn't map io space\n", __func__);
err = -ENOSYS;
@@ -290,7 +290,7 @@
dev_set_drvdata(&op->dev, rtc);
- rtc->irq = irq_of_parse_and_map(op->node, 1);
+ rtc->irq = irq_of_parse_and_map(op->dev.of_node, 1);
err = request_irq(rtc->irq, mpc5121_rtc_handler, IRQF_DISABLED,
"mpc5121-rtc", &op->dev);
if (err) {
@@ -299,7 +299,7 @@
goto out_dispose;
}
- rtc->irq_periodic = irq_of_parse_and_map(op->node, 0);
+ rtc->irq_periodic = irq_of_parse_and_map(op->dev.of_node, 0);
err = request_irq(rtc->irq_periodic, mpc5121_rtc_handler_upd,
IRQF_DISABLED, "mpc5121-rtc_upd", &op->dev);
if (err) {
@@ -365,9 +365,11 @@
};
static struct of_platform_driver mpc5121_rtc_driver = {
- .owner = THIS_MODULE,
- .name = "mpc5121-rtc",
- .match_table = mpc5121_rtc_match,
+ .driver = {
+ .name = "mpc5121-rtc",
+ .owner = THIS_MODULE,
+ .of_match_table = mpc5121_rtc_match,
+ },
.probe = mpc5121_rtc_probe,
.remove = __devexit_p(mpc5121_rtc_remove),
};
diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c
index b65c82f..789f62f 100644
--- a/drivers/rtc/rtc-rx8025.c
+++ b/drivers/rtc/rtc-rx8025.c
@@ -632,7 +632,6 @@
rtc_device_unregister(rx8025->rtc);
errout_free:
- i2c_set_clientdata(client, NULL);
kfree(rx8025);
errout:
@@ -656,7 +655,6 @@
rx8025_sysfs_unregister(&client->dev);
rtc_device_unregister(rx8025->rtc);
- i2c_set_clientdata(client, NULL);
kfree(rx8025);
return 0;
}
diff --git a/drivers/rtc/rtc-s35390a.c b/drivers/rtc/rtc-s35390a.c
index def4d39..f789e00 100644
--- a/drivers/rtc/rtc-s35390a.c
+++ b/drivers/rtc/rtc-s35390a.c
@@ -275,7 +275,6 @@
if (s35390a->client[i])
i2c_unregister_device(s35390a->client[i]);
kfree(s35390a);
- i2c_set_clientdata(client, NULL);
exit:
return err;
@@ -292,7 +291,6 @@
rtc_device_unregister(s35390a->rtc);
kfree(s35390a);
- i2c_set_clientdata(client, NULL);
return 0;
}
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index e5972b2..70b68d3 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -495,8 +495,6 @@
pr_debug("s3c2410_rtc: RTCCON=%02x\n",
readb(s3c_rtc_base + S3C2410_RTCCON));
- s3c_rtc_setfreq(&pdev->dev, 1);
-
device_init_wakeup(&pdev->dev, 1);
/* register RTC and exit */
@@ -510,14 +508,17 @@
goto err_nortc;
}
+ s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
+
if (s3c_rtc_cpu_type == TYPE_S3C64XX)
rtc->max_user_freq = 32768;
else
rtc->max_user_freq = 128;
- s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
-
platform_set_drvdata(pdev, rtc);
+
+ s3c_rtc_setfreq(&pdev->dev, 1);
+
return 0;
err_nortc:
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 0e86247..33975e9 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -1186,6 +1186,29 @@
dasd_schedule_device_bh(device);
}
+enum uc_todo dasd_generic_uc_handler(struct ccw_device *cdev, struct irb *irb)
+{
+ struct dasd_device *device;
+
+ device = dasd_device_from_cdev_locked(cdev);
+
+ if (IS_ERR(device))
+ goto out;
+ if (test_bit(DASD_FLAG_OFFLINE, &device->flags) ||
+ device->state != device->target ||
+ !device->discipline->handle_unsolicited_interrupt){
+ dasd_put_device(device);
+ goto out;
+ }
+
+ dasd_device_clear_timer(device);
+ device->discipline->handle_unsolicited_interrupt(device, irb);
+ dasd_put_device(device);
+out:
+ return UC_TODO_RETRY;
+}
+EXPORT_SYMBOL_GPL(dasd_generic_uc_handler);
+
/*
* If we have an error on a dasd_block layer request then we cancel
* and return all further requests from the same dasd_block as well.
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index 34d51dd..bed7b46 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -948,8 +948,10 @@
if (device->discipline && device->discipline->get_uid &&
!device->discipline->get_uid(device, &uid)) {
if (uid.type == UA_BASE_PAV_ALIAS ||
- uid.type == UA_HYPER_PAV_ALIAS)
+ uid.type == UA_HYPER_PAV_ALIAS) {
+ dasd_put_device(device);
return sprintf(buf, "1\n");
+ }
}
dasd_put_device(device);
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 5b1cd8d..ab84da5 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -3436,6 +3436,7 @@
.freeze = dasd_generic_pm_freeze,
.thaw = dasd_generic_restore_device,
.restore = dasd_generic_restore_device,
+ .uc_handler = dasd_generic_uc_handler,
};
/*
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index 32fac18..49b431d 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -617,6 +617,7 @@
void dasd_generic_handle_state_change(struct dasd_device *);
int dasd_generic_pm_freeze(struct ccw_device *);
int dasd_generic_restore_device(struct ccw_device *);
+enum uc_todo dasd_generic_uc_handler(struct ccw_device *, struct irb *);
int dasd_generic_read_dev_chars(struct dasd_device *, int, void *, int);
char *dasd_get_sense(struct irb *);
diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c
index 5f97ea2..97b25d6 100644
--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -123,8 +123,10 @@
for (i = 0; i < gdev->count; i++) {
if (gdev->cdev[i]) {
+ spin_lock_irq(gdev->cdev[i]->ccwlock);
if (dev_get_drvdata(&gdev->cdev[i]->dev) == gdev)
dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
+ spin_unlock_irq(gdev->cdev[i]->ccwlock);
put_device(&gdev->cdev[i]->dev);
}
}
@@ -262,11 +264,14 @@
goto error;
}
/* Don't allow a device to belong to more than one group. */
+ spin_lock_irq(gdev->cdev[i]->ccwlock);
if (dev_get_drvdata(&gdev->cdev[i]->dev)) {
+ spin_unlock_irq(gdev->cdev[i]->ccwlock);
rc = -EINVAL;
goto error;
}
dev_set_drvdata(&gdev->cdev[i]->dev, gdev);
+ spin_unlock_irq(gdev->cdev[i]->ccwlock);
}
/* Check for sufficient number of bus ids. */
if (i < num_devices && !curr_buf) {
@@ -303,8 +308,10 @@
error:
for (i = 0; i < num_devices; i++)
if (gdev->cdev[i]) {
+ spin_lock_irq(gdev->cdev[i]->ccwlock);
if (dev_get_drvdata(&gdev->cdev[i]->dev) == gdev)
dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
+ spin_unlock_irq(gdev->cdev[i]->ccwlock);
put_device(&gdev->cdev[i]->dev);
gdev->cdev[i] = NULL;
}
diff --git a/drivers/s390/cio/ccwreq.c b/drivers/s390/cio/ccwreq.c
index 37df42a..7f206ed 100644
--- a/drivers/s390/cio/ccwreq.c
+++ b/drivers/s390/cio/ccwreq.c
@@ -159,6 +159,7 @@
{
struct irb *irb = &cdev->private->irb;
struct cmd_scsw *scsw = &irb->scsw.cmd;
+ enum uc_todo todo;
/* Perform BASIC SENSE if needed. */
if (ccw_device_accumulate_and_sense(cdev, lcirb))
@@ -178,6 +179,20 @@
/* Check for command reject. */
if (irb->ecw[0] & SNS0_CMD_REJECT)
return IO_REJECTED;
+ /* Ask the driver what to do */
+ if (cdev->drv && cdev->drv->uc_handler) {
+ todo = cdev->drv->uc_handler(cdev, lcirb);
+ switch (todo) {
+ case UC_TODO_RETRY:
+ return IO_STATUS_ERROR;
+ case UC_TODO_RETRY_ON_NEW_PATH:
+ return IO_PATH_ERROR;
+ case UC_TODO_STOP:
+ return IO_REJECTED;
+ default:
+ return IO_STATUS_ERROR;
+ }
+ }
/* Assume that unexpected SENSE data implies an error. */
return IO_STATUS_ERROR;
}
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index ce7cb87..407d0e9 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -713,7 +713,7 @@
ret = chsc_determine_channel_path_desc(chpid, 0, 0, 0, 0, chsc_resp);
if (ret)
goto out_free;
- memcpy(desc, &chsc_resp->data, chsc_resp->length);
+ memcpy(desc, &chsc_resp->data, sizeof(*desc));
out_free:
kfree(chsc_resp);
return ret;
diff --git a/drivers/s390/cio/ioasm.h b/drivers/s390/cio/ioasm.h
index 7592627..fac0615 100644
--- a/drivers/s390/cio/ioasm.h
+++ b/drivers/s390/cio/ioasm.h
@@ -23,21 +23,6 @@
* Some S390 specific IO instructions as inline
*/
-static inline int stsch(struct subchannel_id schid, struct schib *addr)
-{
- register struct subchannel_id reg1 asm ("1") = schid;
- int ccode;
-
- asm volatile(
- " stsch 0(%3)\n"
- " ipm %0\n"
- " srl %0,28"
- : "=d" (ccode), "=m" (*addr)
- : "d" (reg1), "a" (addr)
- : "cc");
- return ccode;
-}
-
static inline int stsch_err(struct subchannel_id schid, struct schib *addr)
{
register struct subchannel_id reg1 asm ("1") = schid;
diff --git a/drivers/s390/cio/itcw.c b/drivers/s390/cio/itcw.c
index 17da9ab..a0ae295 100644
--- a/drivers/s390/cio/itcw.c
+++ b/drivers/s390/cio/itcw.c
@@ -42,7 +42,7 @@
* size_t size;
*
* size = itcw_calc_size(1, 2, 0);
- * buffer = kmalloc(size, GFP_DMA);
+ * buffer = kmalloc(size, GFP_KERNEL | GFP_DMA);
* if (!buffer)
* return -ENOMEM;
* itcw = itcw_init(buffer, size, ITCW_OP_READ, 1, 2, 0);
diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c
index d53e62a..aacbe14 100644
--- a/drivers/sbus/char/openprom.c
+++ b/drivers/sbus/char/openprom.c
@@ -554,7 +554,7 @@
static int openprom_bsd_ioctl(struct file * file,
unsigned int cmd, unsigned long arg)
{
- DATA *data = (DATA *) file->private_data;
+ DATA *data = file->private_data;
void __user *argp = (void __user *)arg;
int err;
@@ -601,7 +601,7 @@
static long openprom_ioctl(struct file * file,
unsigned int cmd, unsigned long arg)
{
- DATA *data = (DATA *) file->private_data;
+ DATA *data = file->private_data;
switch (cmd) {
case OPROMGETOPT:
diff --git a/drivers/scsi/a2091.c b/drivers/scsi/a2091.c
index 308541f..1bb5d3f 100644
--- a/drivers/scsi/a2091.c
+++ b/drivers/scsi/a2091.c
@@ -1,34 +1,31 @@
#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/zorro.h>
-#include <asm/setup.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/amigaints.h>
#include <asm/amigahw.h>
-#include <linux/zorro.h>
-#include <asm/irq.h>
-#include <linux/spinlock.h>
#include "scsi.h"
-#include <scsi/scsi_host.h>
#include "wd33c93.h"
#include "a2091.h"
-#include <linux/stat.h>
-
-static int a2091_release(struct Scsi_Host *instance);
+struct a2091_hostdata {
+ struct WD33C93_hostdata wh;
+ struct a2091_scsiregs *regs;
+};
static irqreturn_t a2091_intr(int irq, void *data)
{
struct Scsi_Host *instance = data;
- a2091_scsiregs *regs = (a2091_scsiregs *)(instance->base);
- unsigned int status = regs->ISTR;
+ struct a2091_hostdata *hdata = shost_priv(instance);
+ unsigned int status = hdata->regs->ISTR;
unsigned long flags;
if (!(status & (ISTR_INT_F | ISTR_INT_P)) || !(status & ISTR_INTS))
@@ -43,38 +40,39 @@
static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
{
struct Scsi_Host *instance = cmd->device->host;
- struct WD33C93_hostdata *hdata = shost_priv(instance);
- a2091_scsiregs *regs = (a2091_scsiregs *)(instance->base);
+ struct a2091_hostdata *hdata = shost_priv(instance);
+ struct WD33C93_hostdata *wh = &hdata->wh;
+ struct a2091_scsiregs *regs = hdata->regs;
unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
unsigned long addr = virt_to_bus(cmd->SCp.ptr);
/* don't allow DMA if the physical address is bad */
if (addr & A2091_XFER_MASK) {
- hdata->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff;
- hdata->dma_bounce_buffer = kmalloc(hdata->dma_bounce_len,
- GFP_KERNEL);
+ wh->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff;
+ wh->dma_bounce_buffer = kmalloc(wh->dma_bounce_len,
+ GFP_KERNEL);
/* can't allocate memory; use PIO */
- if (!hdata->dma_bounce_buffer) {
- hdata->dma_bounce_len = 0;
+ if (!wh->dma_bounce_buffer) {
+ wh->dma_bounce_len = 0;
return 1;
}
/* get the physical address of the bounce buffer */
- addr = virt_to_bus(hdata->dma_bounce_buffer);
+ addr = virt_to_bus(wh->dma_bounce_buffer);
/* the bounce buffer may not be in the first 16M of physmem */
if (addr & A2091_XFER_MASK) {
/* we could use chipmem... maybe later */
- kfree(hdata->dma_bounce_buffer);
- hdata->dma_bounce_buffer = NULL;
- hdata->dma_bounce_len = 0;
+ kfree(wh->dma_bounce_buffer);
+ wh->dma_bounce_buffer = NULL;
+ wh->dma_bounce_len = 0;
return 1;
}
if (!dir_in) {
/* copy to bounce buffer for a write */
- memcpy(hdata->dma_bounce_buffer, cmd->SCp.ptr,
+ memcpy(wh->dma_bounce_buffer, cmd->SCp.ptr,
cmd->SCp.this_residual);
}
}
@@ -84,7 +82,7 @@
cntr |= CNTR_DDIR;
/* remember direction */
- hdata->dma_dir = dir_in;
+ wh->dma_dir = dir_in;
regs->CNTR = cntr;
@@ -108,20 +106,21 @@
static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
int status)
{
- struct WD33C93_hostdata *hdata = shost_priv(instance);
- a2091_scsiregs *regs = (a2091_scsiregs *)(instance->base);
+ struct a2091_hostdata *hdata = shost_priv(instance);
+ struct WD33C93_hostdata *wh = &hdata->wh;
+ struct a2091_scsiregs *regs = hdata->regs;
/* disable SCSI interrupts */
unsigned short cntr = CNTR_PDMD;
- if (!hdata->dma_dir)
+ if (!wh->dma_dir)
cntr |= CNTR_DDIR;
/* disable SCSI interrupts */
regs->CNTR = cntr;
/* flush if we were reading */
- if (hdata->dma_dir) {
+ if (wh->dma_dir) {
regs->FLUSH = 1;
while (!(regs->ISTR & ISTR_FE_FLG))
;
@@ -137,95 +136,37 @@
regs->CNTR = CNTR_PDMD | CNTR_INTEN;
/* copy from a bounce buffer, if necessary */
- if (status && hdata->dma_bounce_buffer) {
- if (hdata->dma_dir)
- memcpy(SCpnt->SCp.ptr, hdata->dma_bounce_buffer,
+ if (status && wh->dma_bounce_buffer) {
+ if (wh->dma_dir)
+ memcpy(SCpnt->SCp.ptr, wh->dma_bounce_buffer,
SCpnt->SCp.this_residual);
- kfree(hdata->dma_bounce_buffer);
- hdata->dma_bounce_buffer = NULL;
- hdata->dma_bounce_len = 0;
+ kfree(wh->dma_bounce_buffer);
+ wh->dma_bounce_buffer = NULL;
+ wh->dma_bounce_len = 0;
}
}
-static int __init a2091_detect(struct scsi_host_template *tpnt)
-{
- static unsigned char called = 0;
- struct Scsi_Host *instance;
- unsigned long address;
- struct zorro_dev *z = NULL;
- wd33c93_regs wdregs;
- a2091_scsiregs *regs;
- struct WD33C93_hostdata *hdata;
- int num_a2091 = 0;
-
- if (!MACH_IS_AMIGA || called)
- return 0;
- called = 1;
-
- tpnt->proc_name = "A2091";
- tpnt->proc_info = &wd33c93_proc_info;
-
- while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
- if (z->id != ZORRO_PROD_CBM_A590_A2091_1 &&
- z->id != ZORRO_PROD_CBM_A590_A2091_2)
- continue;
- address = z->resource.start;
- if (!request_mem_region(address, 256, "wd33c93"))
- continue;
-
- instance = scsi_register(tpnt, sizeof(struct WD33C93_hostdata));
- if (instance == NULL)
- goto release;
- instance->base = ZTWO_VADDR(address);
- instance->irq = IRQ_AMIGA_PORTS;
- instance->unique_id = z->slotaddr;
- regs = (a2091_scsiregs *)(instance->base);
- regs->DAWR = DAWR_A2091;
- wdregs.SASR = ®s->SASR;
- wdregs.SCMD = ®s->SCMD;
- hdata = shost_priv(instance);
- hdata->no_sync = 0xff;
- hdata->fast = 0;
- hdata->dma_mode = CTRL_DMA;
- wd33c93_init(instance, wdregs, dma_setup, dma_stop,
- WD33C93_FS_8_10);
- if (request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED,
- "A2091 SCSI", instance))
- goto unregister;
- regs->CNTR = CNTR_PDMD | CNTR_INTEN;
- num_a2091++;
- continue;
-
-unregister:
- scsi_unregister(instance);
-release:
- release_mem_region(address, 256);
- }
-
- return num_a2091;
-}
-
static int a2091_bus_reset(struct scsi_cmnd *cmd)
{
+ struct Scsi_Host *instance = cmd->device->host;
+
/* FIXME perform bus-specific reset */
/* FIXME 2: kill this function, and let midlayer fall back
to the same action, calling wd33c93_host_reset() */
- spin_lock_irq(cmd->device->host->host_lock);
+ spin_lock_irq(instance->host_lock);
wd33c93_host_reset(cmd);
- spin_unlock_irq(cmd->device->host->host_lock);
+ spin_unlock_irq(instance->host_lock);
return SUCCESS;
}
-#define HOSTS_C
-
-static struct scsi_host_template driver_template = {
- .proc_name = "A2901",
+static struct scsi_host_template a2091_scsi_template = {
+ .module = THIS_MODULE,
.name = "Commodore A2091/A590 SCSI",
- .detect = a2091_detect,
- .release = a2091_release,
+ .proc_info = wd33c93_proc_info,
+ .proc_name = "A2901",
.queuecommand = wd33c93_queuecommand,
.eh_abort_handler = wd33c93_abort,
.eh_bus_reset_handler = a2091_bus_reset,
@@ -237,19 +178,103 @@
.use_clustering = DISABLE_CLUSTERING
};
-
-#include "scsi_module.c"
-
-static int a2091_release(struct Scsi_Host *instance)
+static int __devinit a2091_probe(struct zorro_dev *z,
+ const struct zorro_device_id *ent)
{
-#ifdef MODULE
- a2091_scsiregs *regs = (a2091_scsiregs *)(instance->base);
+ struct Scsi_Host *instance;
+ int error;
+ struct a2091_scsiregs *regs;
+ wd33c93_regs wdregs;
+ struct a2091_hostdata *hdata;
- regs->CNTR = 0;
- release_mem_region(ZTWO_PADDR(instance->base), 256);
+ if (!request_mem_region(z->resource.start, 256, "wd33c93"))
+ return -EBUSY;
+
+ instance = scsi_host_alloc(&a2091_scsi_template,
+ sizeof(struct a2091_hostdata));
+ if (!instance) {
+ error = -ENOMEM;
+ goto fail_alloc;
+ }
+
+ instance->irq = IRQ_AMIGA_PORTS;
+ instance->unique_id = z->slotaddr;
+
+ regs = (struct a2091_scsiregs *)ZTWO_VADDR(z->resource.start);
+ regs->DAWR = DAWR_A2091;
+
+ wdregs.SASR = ®s->SASR;
+ wdregs.SCMD = ®s->SCMD;
+
+ hdata = shost_priv(instance);
+ hdata->wh.no_sync = 0xff;
+ hdata->wh.fast = 0;
+ hdata->wh.dma_mode = CTRL_DMA;
+ hdata->regs = regs;
+
+ wd33c93_init(instance, wdregs, dma_setup, dma_stop, WD33C93_FS_8_10);
+ error = request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED,
+ "A2091 SCSI", instance);
+ if (error)
+ goto fail_irq;
+
+ regs->CNTR = CNTR_PDMD | CNTR_INTEN;
+
+ error = scsi_add_host(instance, NULL);
+ if (error)
+ goto fail_host;
+
+ zorro_set_drvdata(z, instance);
+
+ scsi_scan_host(instance);
+ return 0;
+
+fail_host:
free_irq(IRQ_AMIGA_PORTS, instance);
-#endif
- return 1;
+fail_irq:
+ scsi_host_put(instance);
+fail_alloc:
+ release_mem_region(z->resource.start, 256);
+ return error;
}
+static void __devexit a2091_remove(struct zorro_dev *z)
+{
+ struct Scsi_Host *instance = zorro_get_drvdata(z);
+ struct a2091_hostdata *hdata = shost_priv(instance);
+
+ hdata->regs->CNTR = 0;
+ scsi_remove_host(instance);
+ free_irq(IRQ_AMIGA_PORTS, instance);
+ scsi_host_put(instance);
+ release_mem_region(z->resource.start, 256);
+}
+
+static struct zorro_device_id a2091_zorro_tbl[] __devinitdata = {
+ { ZORRO_PROD_CBM_A590_A2091_1 },
+ { ZORRO_PROD_CBM_A590_A2091_2 },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(zorro, a2091_zorro_tbl);
+
+static struct zorro_driver a2091_driver = {
+ .name = "a2091",
+ .id_table = a2091_zorro_tbl,
+ .probe = a2091_probe,
+ .remove = __devexit_p(a2091_remove),
+};
+
+static int __init a2091_init(void)
+{
+ return zorro_register_driver(&a2091_driver);
+}
+module_init(a2091_init);
+
+static void __exit a2091_exit(void)
+{
+ zorro_unregister_driver(&a2091_driver);
+}
+module_exit(a2091_exit);
+
+MODULE_DESCRIPTION("Commodore A2091/A590 SCSI");
MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/a2091.h b/drivers/scsi/a2091.h
index 1c3daa1..794b8e6 100644
--- a/drivers/scsi/a2091.h
+++ b/drivers/scsi/a2091.h
@@ -25,7 +25,7 @@
*/
#define A2091_XFER_MASK (0xff000001)
-typedef struct {
+struct a2091_scsiregs {
unsigned char pad1[64];
volatile unsigned short ISTR;
volatile unsigned short CNTR;
@@ -44,7 +44,7 @@
volatile unsigned short CINT;
unsigned char pad7[2];
volatile unsigned short FLUSH;
-} a2091_scsiregs;
+};
#define DAWR_A2091 (3)
diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c
index bc6eb69..d946802 100644
--- a/drivers/scsi/a3000.c
+++ b/drivers/scsi/a3000.c
@@ -1,53 +1,52 @@
#include <linux/types.h>
#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
#include <linux/ioport.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
+#include <linux/platform_device.h>
-#include <asm/setup.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/amigaints.h>
#include <asm/amigahw.h>
-#include <asm/irq.h>
#include "scsi.h"
-#include <scsi/scsi_host.h>
#include "wd33c93.h"
#include "a3000.h"
-#include <linux/stat.h>
+struct a3000_hostdata {
+ struct WD33C93_hostdata wh;
+ struct a3000_scsiregs *regs;
+};
-#define DMA(ptr) ((a3000_scsiregs *)((ptr)->base))
-
-static struct Scsi_Host *a3000_host = NULL;
-
-static int a3000_release(struct Scsi_Host *instance);
-
-static irqreturn_t a3000_intr(int irq, void *dummy)
+static irqreturn_t a3000_intr(int irq, void *data)
{
+ struct Scsi_Host *instance = data;
+ struct a3000_hostdata *hdata = shost_priv(instance);
+ unsigned int status = hdata->regs->ISTR;
unsigned long flags;
- unsigned int status = DMA(a3000_host)->ISTR;
if (!(status & ISTR_INT_P))
return IRQ_NONE;
if (status & ISTR_INTS) {
- spin_lock_irqsave(a3000_host->host_lock, flags);
- wd33c93_intr(a3000_host);
- spin_unlock_irqrestore(a3000_host->host_lock, flags);
+ spin_lock_irqsave(instance->host_lock, flags);
+ wd33c93_intr(instance);
+ spin_unlock_irqrestore(instance->host_lock, flags);
return IRQ_HANDLED;
}
- printk("Non-serviced A3000 SCSI-interrupt? ISTR = %02x\n", status);
+ pr_warning("Non-serviced A3000 SCSI-interrupt? ISTR = %02x\n", status);
return IRQ_NONE;
}
static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
{
- struct WD33C93_hostdata *hdata = shost_priv(a3000_host);
+ struct Scsi_Host *instance = cmd->device->host;
+ struct a3000_hostdata *hdata = shost_priv(instance);
+ struct WD33C93_hostdata *wh = &hdata->wh;
+ struct a3000_scsiregs *regs = hdata->regs;
unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
unsigned long addr = virt_to_bus(cmd->SCp.ptr);
@@ -58,23 +57,23 @@
* buffer
*/
if (addr & A3000_XFER_MASK) {
- hdata->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff;
- hdata->dma_bounce_buffer = kmalloc(hdata->dma_bounce_len,
- GFP_KERNEL);
+ wh->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff;
+ wh->dma_bounce_buffer = kmalloc(wh->dma_bounce_len,
+ GFP_KERNEL);
/* can't allocate memory; use PIO */
- if (!hdata->dma_bounce_buffer) {
- hdata->dma_bounce_len = 0;
+ if (!wh->dma_bounce_buffer) {
+ wh->dma_bounce_len = 0;
return 1;
}
if (!dir_in) {
/* copy to bounce buffer for a write */
- memcpy(hdata->dma_bounce_buffer, cmd->SCp.ptr,
+ memcpy(wh->dma_bounce_buffer, cmd->SCp.ptr,
cmd->SCp.this_residual);
}
- addr = virt_to_bus(hdata->dma_bounce_buffer);
+ addr = virt_to_bus(wh->dma_bounce_buffer);
}
/* setup dma direction */
@@ -82,12 +81,12 @@
cntr |= CNTR_DDIR;
/* remember direction */
- hdata->dma_dir = dir_in;
+ wh->dma_dir = dir_in;
- DMA(a3000_host)->CNTR = cntr;
+ regs->CNTR = cntr;
/* setup DMA *physical* address */
- DMA(a3000_host)->ACR = addr;
+ regs->ACR = addr;
if (dir_in) {
/* invalidate any cache */
@@ -99,7 +98,7 @@
/* start DMA */
mb(); /* make sure setup is completed */
- DMA(a3000_host)->ST_DMA = 1;
+ regs->ST_DMA = 1;
mb(); /* make sure DMA has started before next IO */
/* return success */
@@ -109,22 +108,24 @@
static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
int status)
{
- struct WD33C93_hostdata *hdata = shost_priv(instance);
+ struct a3000_hostdata *hdata = shost_priv(instance);
+ struct WD33C93_hostdata *wh = &hdata->wh;
+ struct a3000_scsiregs *regs = hdata->regs;
/* disable SCSI interrupts */
unsigned short cntr = CNTR_PDMD;
- if (!hdata->dma_dir)
+ if (!wh->dma_dir)
cntr |= CNTR_DDIR;
- DMA(instance)->CNTR = cntr;
+ regs->CNTR = cntr;
mb(); /* make sure CNTR is updated before next IO */
/* flush if we were reading */
- if (hdata->dma_dir) {
- DMA(instance)->FLUSH = 1;
+ if (wh->dma_dir) {
+ regs->FLUSH = 1;
mb(); /* don't allow prefetch */
- while (!(DMA(instance)->ISTR & ISTR_FE_FLG))
+ while (!(regs->ISTR & ISTR_FE_FLG))
barrier();
mb(); /* no IO until FLUSH is done */
}
@@ -133,96 +134,54 @@
/* I think that this CINT is only necessary if you are
* using the terminal count features. HM 7 Mar 1994
*/
- DMA(instance)->CINT = 1;
+ regs->CINT = 1;
/* stop DMA */
- DMA(instance)->SP_DMA = 1;
+ regs->SP_DMA = 1;
mb(); /* make sure DMA is stopped before next IO */
/* restore the CONTROL bits (minus the direction flag) */
- DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN;
+ regs->CNTR = CNTR_PDMD | CNTR_INTEN;
mb(); /* make sure CNTR is updated before next IO */
/* copy from a bounce buffer, if necessary */
- if (status && hdata->dma_bounce_buffer) {
+ if (status && wh->dma_bounce_buffer) {
if (SCpnt) {
- if (hdata->dma_dir && SCpnt)
- memcpy(SCpnt->SCp.ptr,
- hdata->dma_bounce_buffer,
+ if (wh->dma_dir && SCpnt)
+ memcpy(SCpnt->SCp.ptr, wh->dma_bounce_buffer,
SCpnt->SCp.this_residual);
- kfree(hdata->dma_bounce_buffer);
- hdata->dma_bounce_buffer = NULL;
- hdata->dma_bounce_len = 0;
+ kfree(wh->dma_bounce_buffer);
+ wh->dma_bounce_buffer = NULL;
+ wh->dma_bounce_len = 0;
} else {
- kfree(hdata->dma_bounce_buffer);
- hdata->dma_bounce_buffer = NULL;
- hdata->dma_bounce_len = 0;
+ kfree(wh->dma_bounce_buffer);
+ wh->dma_bounce_buffer = NULL;
+ wh->dma_bounce_len = 0;
}
}
}
-static int __init a3000_detect(struct scsi_host_template *tpnt)
-{
- wd33c93_regs regs;
- struct WD33C93_hostdata *hdata;
-
- if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(A3000_SCSI))
- return 0;
- if (!request_mem_region(0xDD0000, 256, "wd33c93"))
- return 0;
-
- tpnt->proc_name = "A3000";
- tpnt->proc_info = &wd33c93_proc_info;
-
- a3000_host = scsi_register(tpnt, sizeof(struct WD33C93_hostdata));
- if (a3000_host == NULL)
- goto fail_register;
-
- a3000_host->base = ZTWO_VADDR(0xDD0000);
- a3000_host->irq = IRQ_AMIGA_PORTS;
- DMA(a3000_host)->DAWR = DAWR_A3000;
- regs.SASR = &(DMA(a3000_host)->SASR);
- regs.SCMD = &(DMA(a3000_host)->SCMD);
- hdata = shost_priv(a3000_host);
- hdata->no_sync = 0xff;
- hdata->fast = 0;
- hdata->dma_mode = CTRL_DMA;
- wd33c93_init(a3000_host, regs, dma_setup, dma_stop, WD33C93_FS_12_15);
- if (request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED, "A3000 SCSI",
- a3000_intr))
- goto fail_irq;
- DMA(a3000_host)->CNTR = CNTR_PDMD | CNTR_INTEN;
-
- return 1;
-
-fail_irq:
- scsi_unregister(a3000_host);
-fail_register:
- release_mem_region(0xDD0000, 256);
- return 0;
-}
-
static int a3000_bus_reset(struct scsi_cmnd *cmd)
{
+ struct Scsi_Host *instance = cmd->device->host;
+
/* FIXME perform bus-specific reset */
/* FIXME 2: kill this entire function, which should
cause mid-layer to call wd33c93_host_reset anyway? */
- spin_lock_irq(cmd->device->host->host_lock);
+ spin_lock_irq(instance->host_lock);
wd33c93_host_reset(cmd);
- spin_unlock_irq(cmd->device->host->host_lock);
+ spin_unlock_irq(instance->host_lock);
return SUCCESS;
}
-#define HOSTS_C
-
-static struct scsi_host_template driver_template = {
- .proc_name = "A3000",
+static struct scsi_host_template amiga_a3000_scsi_template = {
+ .module = THIS_MODULE,
.name = "Amiga 3000 built-in SCSI",
- .detect = a3000_detect,
- .release = a3000_release,
+ .proc_info = wd33c93_proc_info,
+ .proc_name = "A3000",
.queuecommand = wd33c93_queuecommand,
.eh_abort_handler = wd33c93_abort,
.eh_bus_reset_handler = a3000_bus_reset,
@@ -234,15 +193,104 @@
.use_clustering = ENABLE_CLUSTERING
};
-
-#include "scsi_module.c"
-
-static int a3000_release(struct Scsi_Host *instance)
+static int __init amiga_a3000_scsi_probe(struct platform_device *pdev)
{
- DMA(instance)->CNTR = 0;
- release_mem_region(0xDD0000, 256);
- free_irq(IRQ_AMIGA_PORTS, a3000_intr);
- return 1;
+ struct resource *res;
+ struct Scsi_Host *instance;
+ int error;
+ struct a3000_scsiregs *regs;
+ wd33c93_regs wdregs;
+ struct a3000_hostdata *hdata;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ if (!request_mem_region(res->start, resource_size(res), "wd33c93"))
+ return -EBUSY;
+
+ instance = scsi_host_alloc(&amiga_a3000_scsi_template,
+ sizeof(struct a3000_hostdata));
+ if (!instance) {
+ error = -ENOMEM;
+ goto fail_alloc;
+ }
+
+ instance->irq = IRQ_AMIGA_PORTS;
+
+ regs = (struct a3000_scsiregs *)ZTWO_VADDR(res->start);
+ regs->DAWR = DAWR_A3000;
+
+ wdregs.SASR = ®s->SASR;
+ wdregs.SCMD = ®s->SCMD;
+
+ hdata = shost_priv(instance);
+ hdata->wh.no_sync = 0xff;
+ hdata->wh.fast = 0;
+ hdata->wh.dma_mode = CTRL_DMA;
+ hdata->regs = regs;
+
+ wd33c93_init(instance, wdregs, dma_setup, dma_stop, WD33C93_FS_12_15);
+ error = request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED,
+ "A3000 SCSI", instance);
+ if (error)
+ goto fail_irq;
+
+ regs->CNTR = CNTR_PDMD | CNTR_INTEN;
+
+ error = scsi_add_host(instance, NULL);
+ if (error)
+ goto fail_host;
+
+ platform_set_drvdata(pdev, instance);
+
+ scsi_scan_host(instance);
+ return 0;
+
+fail_host:
+ free_irq(IRQ_AMIGA_PORTS, instance);
+fail_irq:
+ scsi_host_put(instance);
+fail_alloc:
+ release_mem_region(res->start, resource_size(res));
+ return error;
}
+static int __exit amiga_a3000_scsi_remove(struct platform_device *pdev)
+{
+ struct Scsi_Host *instance = platform_get_drvdata(pdev);
+ struct a3000_hostdata *hdata = shost_priv(instance);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ hdata->regs->CNTR = 0;
+ scsi_remove_host(instance);
+ free_irq(IRQ_AMIGA_PORTS, instance);
+ scsi_host_put(instance);
+ release_mem_region(res->start, resource_size(res));
+ return 0;
+}
+
+static struct platform_driver amiga_a3000_scsi_driver = {
+ .remove = __exit_p(amiga_a3000_scsi_remove),
+ .driver = {
+ .name = "amiga-a3000-scsi",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init amiga_a3000_scsi_init(void)
+{
+ return platform_driver_probe(&amiga_a3000_scsi_driver,
+ amiga_a3000_scsi_probe);
+}
+module_init(amiga_a3000_scsi_init);
+
+static void __exit amiga_a3000_scsi_exit(void)
+{
+ platform_driver_unregister(&amiga_a3000_scsi_driver);
+}
+module_exit(amiga_a3000_scsi_exit);
+
+MODULE_DESCRIPTION("Amiga 3000 built-in SCSI");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:amiga-a3000-scsi");
diff --git a/drivers/scsi/a3000.h b/drivers/scsi/a3000.h
index 684813e..49db4a3 100644
--- a/drivers/scsi/a3000.h
+++ b/drivers/scsi/a3000.h
@@ -25,7 +25,7 @@
*/
#define A3000_XFER_MASK (0x00000003)
-typedef struct {
+struct a3000_scsiregs {
unsigned char pad1[2];
volatile unsigned short DAWR;
volatile unsigned int WTC;
@@ -46,7 +46,7 @@
volatile unsigned char SASR;
unsigned char pad9;
volatile unsigned char SCMD;
-} a3000_scsiregs;
+};
#define DAWR_A3000 (3)
diff --git a/drivers/scsi/a4000t.c b/drivers/scsi/a4000t.c
index 11ae6be..23c76f4 100644
--- a/drivers/scsi/a4000t.c
+++ b/drivers/scsi/a4000t.c
@@ -20,10 +20,6 @@
#include "53c700.h"
-MODULE_AUTHOR("Alan Hourihane <alanh@fairlite.demon.co.uk> / Kars de Jong <jongk@linux-m68k.org>");
-MODULE_DESCRIPTION("Amiga A4000T NCR53C710 driver");
-MODULE_LICENSE("GPL");
-
static struct scsi_host_template a4000t_scsi_driver_template = {
.name = "A4000T builtin SCSI",
@@ -32,30 +28,35 @@
.module = THIS_MODULE,
};
-static struct platform_device *a4000t_scsi_device;
-#define A4000T_SCSI_ADDR 0xdd0040
+#define A4000T_SCSI_OFFSET 0x40
-static int __devinit a4000t_probe(struct platform_device *dev)
+static int __init amiga_a4000t_scsi_probe(struct platform_device *pdev)
{
- struct Scsi_Host *host;
+ struct resource *res;
+ phys_addr_t scsi_addr;
struct NCR_700_Host_Parameters *hostdata;
+ struct Scsi_Host *host;
- if (!(MACH_IS_AMIGA && AMIGAHW_PRESENT(A4000_SCSI)))
- goto out;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
- if (!request_mem_region(A4000T_SCSI_ADDR, 0x1000,
+ if (!request_mem_region(res->start, resource_size(res),
"A4000T builtin SCSI"))
- goto out;
+ return -EBUSY;
- hostdata = kzalloc(sizeof(struct NCR_700_Host_Parameters), GFP_KERNEL);
+ hostdata = kzalloc(sizeof(struct NCR_700_Host_Parameters),
+ GFP_KERNEL);
if (!hostdata) {
- printk(KERN_ERR "a4000t-scsi: Failed to allocate host data\n");
+ dev_err(&pdev->dev, "Failed to allocate host data\n");
goto out_release;
}
+ scsi_addr = res->start + A4000T_SCSI_OFFSET;
+
/* Fill in the required pieces of hostdata */
- hostdata->base = (void __iomem *)ZTWO_VADDR(A4000T_SCSI_ADDR);
+ hostdata->base = (void __iomem *)ZTWO_VADDR(scsi_addr);
hostdata->clock = 50;
hostdata->chip710 = 1;
hostdata->dmode_extra = DMODE_FC2;
@@ -63,26 +64,25 @@
/* and register the chip */
host = NCR_700_detect(&a4000t_scsi_driver_template, hostdata,
- &dev->dev);
+ &pdev->dev);
if (!host) {
- printk(KERN_ERR "a4000t-scsi: No host detected; "
- "board configuration problem?\n");
+ dev_err(&pdev->dev,
+ "No host detected; board configuration problem?\n");
goto out_free;
}
host->this_id = 7;
- host->base = A4000T_SCSI_ADDR;
+ host->base = scsi_addr;
host->irq = IRQ_AMIGA_PORTS;
if (request_irq(host->irq, NCR_700_intr, IRQF_SHARED, "a4000t-scsi",
host)) {
- printk(KERN_ERR "a4000t-scsi: request_irq failed\n");
+ dev_err(&pdev->dev, "request_irq failed\n");
goto out_put_host;
}
- platform_set_drvdata(dev, host);
+ platform_set_drvdata(pdev, host);
scsi_scan_host(host);
-
return 0;
out_put_host:
@@ -90,58 +90,49 @@
out_free:
kfree(hostdata);
out_release:
- release_mem_region(A4000T_SCSI_ADDR, 0x1000);
- out:
+ release_mem_region(res->start, resource_size(res));
return -ENODEV;
}
-static __devexit int a4000t_device_remove(struct platform_device *dev)
+static int __exit amiga_a4000t_scsi_remove(struct platform_device *pdev)
{
- struct Scsi_Host *host = platform_get_drvdata(dev);
+ struct Scsi_Host *host = platform_get_drvdata(pdev);
struct NCR_700_Host_Parameters *hostdata = shost_priv(host);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
scsi_remove_host(host);
-
NCR_700_release(host);
kfree(hostdata);
free_irq(host->irq, host);
- release_mem_region(A4000T_SCSI_ADDR, 0x1000);
-
+ release_mem_region(res->start, resource_size(res));
return 0;
}
-static struct platform_driver a4000t_scsi_driver = {
- .driver = {
- .name = "a4000t-scsi",
- .owner = THIS_MODULE,
+static struct platform_driver amiga_a4000t_scsi_driver = {
+ .remove = __exit_p(amiga_a4000t_scsi_remove),
+ .driver = {
+ .name = "amiga-a4000t-scsi",
+ .owner = THIS_MODULE,
},
- .probe = a4000t_probe,
- .remove = __devexit_p(a4000t_device_remove),
};
-static int __init a4000t_scsi_init(void)
+static int __init amiga_a4000t_scsi_init(void)
{
- int err;
-
- err = platform_driver_register(&a4000t_scsi_driver);
- if (err)
- return err;
-
- a4000t_scsi_device = platform_device_register_simple("a4000t-scsi",
- -1, NULL, 0);
- if (IS_ERR(a4000t_scsi_device)) {
- platform_driver_unregister(&a4000t_scsi_driver);
- return PTR_ERR(a4000t_scsi_device);
- }
-
- return err;
+ return platform_driver_probe(&amiga_a4000t_scsi_driver,
+ amiga_a4000t_scsi_probe);
}
-static void __exit a4000t_scsi_exit(void)
+module_init(amiga_a4000t_scsi_init);
+
+static void __exit amiga_a4000t_scsi_exit(void)
{
- platform_device_unregister(a4000t_scsi_device);
- platform_driver_unregister(&a4000t_scsi_driver);
+ platform_driver_unregister(&amiga_a4000t_scsi_driver);
}
-module_init(a4000t_scsi_init);
-module_exit(a4000t_scsi_exit);
+module_exit(amiga_a4000t_scsi_exit);
+
+MODULE_AUTHOR("Alan Hourihane <alanh@fairlite.demon.co.uk> / "
+ "Kars de Jong <jongk@linux-m68k.org>");
+MODULE_DESCRIPTION("Amiga A4000T NCR53C710 driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:amiga-a4000t-scsi");
diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c
index 9c0c911..1a5bf57 100644
--- a/drivers/scsi/aacraid/commctrl.c
+++ b/drivers/scsi/aacraid/commctrl.c
@@ -655,9 +655,9 @@
/* Does this really need to be GFP_DMA? */
p = kmalloc(usg->sg[i].count,GFP_KERNEL|__GFP_DMA);
if(!p) {
- kfree (usg);
- dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
+ dprintk((KERN_DEBUG "aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
usg->sg[i].count,i,usg->count));
+ kfree(usg);
rcode = -ENOMEM;
goto cleanup;
}
diff --git a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h
index ab646e5..ce5371b 100644
--- a/drivers/scsi/arcmsr/arcmsr.h
+++ b/drivers/scsi/arcmsr/arcmsr.h
@@ -48,7 +48,7 @@
/*The limit of outstanding scsi command that firmware can handle*/
#define ARCMSR_MAX_OUTSTANDING_CMD 256
#define ARCMSR_MAX_FREECCB_NUM 320
-#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.15 2008/02/27"
+#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.15 2008/11/03"
#define ARCMSR_SCSI_INITIATOR_ID 255
#define ARCMSR_MAX_XFER_SECTORS 512
#define ARCMSR_MAX_XFER_SECTORS_B 4096
@@ -110,6 +110,8 @@
#define FUNCTION_SAY_HELLO 0x0807
#define FUNCTION_SAY_GOODBYE 0x0808
#define FUNCTION_FLUSH_ADAPTER_CACHE 0x0809
+#define FUNCTION_GET_FIRMWARE_STATUS 0x080A
+#define FUNCTION_HARDWARE_RESET 0x080B
/* ARECA IO CONTROL CODE*/
#define ARCMSR_MESSAGE_READ_RQBUFFER \
ARECA_SATA_RAID | FUNCTION_READ_RQBUFFER
@@ -133,6 +135,7 @@
#define ARCMSR_MESSAGE_RETURNCODE_OK 0x00000001
#define ARCMSR_MESSAGE_RETURNCODE_ERROR 0x00000006
#define ARCMSR_MESSAGE_RETURNCODE_3F 0x0000003F
+#define ARCMSR_MESSAGE_RETURNCODE_BUS_HANG_ON 0x00000088
/*
*************************************************************
** structure for holding DMA address data
@@ -341,13 +344,13 @@
uint32_t done_qbuffer[ARCMSR_MAX_HBB_POSTQUEUE];
uint32_t postq_index;
uint32_t doneq_index;
- void __iomem *drv2iop_doorbell_reg;
- void __iomem *drv2iop_doorbell_mask_reg;
- void __iomem *iop2drv_doorbell_reg;
- void __iomem *iop2drv_doorbell_mask_reg;
- void __iomem *msgcode_rwbuffer_reg;
- void __iomem *ioctl_wbuffer_reg;
- void __iomem *ioctl_rbuffer_reg;
+ uint32_t __iomem *drv2iop_doorbell_reg;
+ uint32_t __iomem *drv2iop_doorbell_mask_reg;
+ uint32_t __iomem *iop2drv_doorbell_reg;
+ uint32_t __iomem *iop2drv_doorbell_mask_reg;
+ uint32_t __iomem *msgcode_rwbuffer_reg;
+ uint32_t __iomem *ioctl_wbuffer_reg;
+ uint32_t __iomem *ioctl_rbuffer_reg;
};
/*
@@ -375,6 +378,7 @@
/* message unit ATU inbound base address0 */
uint32_t acb_flags;
+ uint8_t adapter_index;
#define ACB_F_SCSISTOPADAPTER 0x0001
#define ACB_F_MSG_STOP_BGRB 0x0002
/* stop RAID background rebuild */
@@ -390,7 +394,7 @@
#define ACB_F_BUS_RESET 0x0080
#define ACB_F_IOP_INITED 0x0100
/* iop init */
-
+ #define ACB_F_FIRMWARE_TRAP 0x0400
struct CommandControlBlock * pccb_pool[ARCMSR_MAX_FREECCB_NUM];
/* used for memory free */
struct list_head ccb_free_list;
@@ -423,12 +427,19 @@
#define ARECA_RAID_GOOD 0xaa
uint32_t num_resets;
uint32_t num_aborts;
+ uint32_t signature;
uint32_t firm_request_len;
uint32_t firm_numbers_queue;
uint32_t firm_sdram_size;
uint32_t firm_hd_channels;
char firm_model[12];
char firm_version[20];
+ char device_map[20]; /*21,84-99*/
+ struct work_struct arcmsr_do_message_isr_bh;
+ struct timer_list eternal_timer;
+ unsigned short fw_state;
+ atomic_t rq_map_token;
+ int ante_token_value;
};/* HW_DEVICE_EXTENSION */
/*
*******************************************************************************
diff --git a/drivers/scsi/arcmsr/arcmsr_attr.c b/drivers/scsi/arcmsr/arcmsr_attr.c
index a4e04c5..07fdfe5 100644
--- a/drivers/scsi/arcmsr/arcmsr_attr.c
+++ b/drivers/scsi/arcmsr/arcmsr_attr.c
@@ -192,6 +192,7 @@
.attr = {
.name = "mu_read",
.mode = S_IRUSR ,
+ .owner = THIS_MODULE,
},
.size = 1032,
.read = arcmsr_sysfs_iop_message_read,
@@ -201,6 +202,7 @@
.attr = {
.name = "mu_write",
.mode = S_IWUSR,
+ .owner = THIS_MODULE,
},
.size = 1032,
.write = arcmsr_sysfs_iop_message_write,
@@ -210,6 +212,7 @@
.attr = {
.name = "mu_clear",
.mode = S_IWUSR,
+ .owner = THIS_MODULE,
},
.size = 1,
.write = arcmsr_sysfs_iop_message_clear,
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index ffbe219..ffa5479 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -72,8 +72,16 @@
#include <scsi/scsicam.h>
#include "arcmsr.h"
+#ifdef CONFIG_SCSI_ARCMSR_RESET
+ static int sleeptime = 20;
+ static int retrycount = 12;
+ module_param(sleeptime, int, S_IRUGO|S_IWUSR);
+ MODULE_PARM_DESC(sleeptime, "The waiting period for FW ready while bus reset");
+ module_param(retrycount, int, S_IRUGO|S_IWUSR);
+ MODULE_PARM_DESC(retrycount, "The retry count for FW ready while bus reset");
+#endif
MODULE_AUTHOR("Erich Chen <support@areca.com.tw>");
-MODULE_DESCRIPTION("ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID HOST Adapter");
+MODULE_DESCRIPTION("ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Bus Adapter");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION(ARCMSR_DRIVER_VERSION);
@@ -96,6 +104,13 @@
static void arcmsr_stop_adapter_bgrb(struct AdapterControlBlock *acb);
static void arcmsr_flush_hba_cache(struct AdapterControlBlock *acb);
static void arcmsr_flush_hbb_cache(struct AdapterControlBlock *acb);
+static void arcmsr_request_device_map(unsigned long pacb);
+static void arcmsr_request_hba_device_map(struct AdapterControlBlock *acb);
+static void arcmsr_request_hbb_device_map(struct AdapterControlBlock *acb);
+static void arcmsr_message_isr_bh_fn(struct work_struct *work);
+static void *arcmsr_get_firmware_spec(struct AdapterControlBlock *acb, int mode);
+static void arcmsr_start_adapter_bgrb(struct AdapterControlBlock *acb);
+
static const char *arcmsr_info(struct Scsi_Host *);
static irqreturn_t arcmsr_interrupt(struct AdapterControlBlock *acb);
static int arcmsr_adjust_disk_queue_depth(struct scsi_device *sdev,
@@ -112,7 +127,7 @@
static struct scsi_host_template arcmsr_scsi_host_template = {
.module = THIS_MODULE,
- .name = "ARCMSR ARECA SATA/SAS RAID HOST Adapter"
+ .name = "ARCMSR ARECA SATA/SAS RAID Host Bus Adapter"
ARCMSR_DRIVER_VERSION,
.info = arcmsr_info,
.queuecommand = arcmsr_queue_command,
@@ -128,16 +143,6 @@
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = arcmsr_host_attrs,
};
-#ifdef CONFIG_SCSI_ARCMSR_AER
-static pci_ers_result_t arcmsr_pci_slot_reset(struct pci_dev *pdev);
-static pci_ers_result_t arcmsr_pci_error_detected(struct pci_dev *pdev,
- pci_channel_state_t state);
-
-static struct pci_error_handlers arcmsr_pci_error_handlers = {
- .error_detected = arcmsr_pci_error_detected,
- .slot_reset = arcmsr_pci_slot_reset,
-};
-#endif
static struct pci_device_id arcmsr_device_id_table[] = {
{PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1110)},
{PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1120)},
@@ -166,9 +171,6 @@
.probe = arcmsr_probe,
.remove = arcmsr_remove,
.shutdown = arcmsr_shutdown,
- #ifdef CONFIG_SCSI_ARCMSR_AER
- .err_handler = &arcmsr_pci_error_handlers,
- #endif
};
static irqreturn_t arcmsr_do_interrupt(int irq, void *dev_id)
@@ -236,10 +238,9 @@
void *dma_coherent;
dma_addr_t dma_coherent_handle, dma_addr;
struct CommandControlBlock *ccb_tmp;
- uint32_t intmask_org;
int i, j;
- acb->pmuA = pci_ioremap_bar(pdev, 0);
+ acb->pmuA = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
if (!acb->pmuA) {
printk(KERN_NOTICE "arcmsr%d: memory mapping region fail \n",
acb->host->host_no);
@@ -281,12 +282,6 @@
for (i = 0; i < ARCMSR_MAX_TARGETID; i++)
for (j = 0; j < ARCMSR_MAX_TARGETLUN; j++)
acb->devstate[i][j] = ARECA_RAID_GONE;
-
- /*
- ** here we need to tell iop 331 our ccb_tmp.HighPart
- ** if ccb_tmp.HighPart is not zero
- */
- intmask_org = arcmsr_disable_outbound_ints(acb);
}
break;
@@ -297,7 +292,6 @@
void __iomem *mem_base0, *mem_base1;
void *dma_coherent;
dma_addr_t dma_coherent_handle, dma_addr;
- uint32_t intmask_org;
struct CommandControlBlock *ccb_tmp;
int i, j;
@@ -333,11 +327,13 @@
reg = (struct MessageUnit_B *)(dma_coherent +
ARCMSR_MAX_FREECCB_NUM * sizeof(struct CommandControlBlock));
acb->pmuB = reg;
- mem_base0 = pci_ioremap_bar(pdev, 0);
+ mem_base0 = ioremap(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
if (!mem_base0)
goto out;
- mem_base1 = pci_ioremap_bar(pdev, 2);
+ mem_base1 = ioremap(pci_resource_start(pdev, 2),
+ pci_resource_len(pdev, 2));
if (!mem_base1) {
iounmap(mem_base0);
goto out;
@@ -357,12 +353,6 @@
for (i = 0; i < ARCMSR_MAX_TARGETID; i++)
for (j = 0; j < ARCMSR_MAX_TARGETLUN; j++)
acb->devstate[i][j] = ARECA_RAID_GOOD;
-
- /*
- ** here we need to tell iop 331 our ccb_tmp.HighPart
- ** if ccb_tmp.HighPart is not zero
- */
- intmask_org = arcmsr_disable_outbound_ints(acb);
}
break;
}
@@ -374,6 +364,88 @@
sizeof(struct MessageUnit_B)), acb->dma_coherent, acb->dma_coherent_handle);
return -ENOMEM;
}
+static void arcmsr_message_isr_bh_fn(struct work_struct *work)
+{
+ struct AdapterControlBlock *acb = container_of(work, struct AdapterControlBlock, arcmsr_do_message_isr_bh);
+
+ switch (acb->adapter_type) {
+ case ACB_ADAPTER_TYPE_A: {
+
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
+ char *acb_dev_map = (char *)acb->device_map;
+ uint32_t __iomem *signature = (uint32_t __iomem *) (®->message_rwbuffer[0]);
+ char __iomem *devicemap = (char __iomem *) (®->message_rwbuffer[21]);
+ int target, lun;
+ struct scsi_device *psdev;
+ char diff;
+
+ atomic_inc(&acb->rq_map_token);
+ if (readl(signature) == ARCMSR_SIGNATURE_GET_CONFIG) {
+ for (target = 0; target < ARCMSR_MAX_TARGETID - 1; target++) {
+ diff = (*acb_dev_map)^readb(devicemap);
+ if (diff != 0) {
+ char temp;
+ *acb_dev_map = readb(devicemap);
+ temp = *acb_dev_map;
+ for (lun = 0; lun < ARCMSR_MAX_TARGETLUN; lun++) {
+ if ((temp & 0x01) == 1 && (diff & 0x01) == 1) {
+ scsi_add_device(acb->host, 0, target, lun);
+ } else if ((temp & 0x01) == 0 && (diff & 0x01) == 1) {
+ psdev = scsi_device_lookup(acb->host, 0, target, lun);
+ if (psdev != NULL) {
+ scsi_remove_device(psdev);
+ scsi_device_put(psdev);
+ }
+ }
+ temp >>= 1;
+ diff >>= 1;
+ }
+ }
+ devicemap++;
+ acb_dev_map++;
+ }
+ }
+ break;
+ }
+
+ case ACB_ADAPTER_TYPE_B: {
+ struct MessageUnit_B *reg = acb->pmuB;
+ char *acb_dev_map = (char *)acb->device_map;
+ uint32_t __iomem *signature = (uint32_t __iomem *)(®->msgcode_rwbuffer_reg[0]);
+ char __iomem *devicemap = (char __iomem *)(®->msgcode_rwbuffer_reg[21]);
+ int target, lun;
+ struct scsi_device *psdev;
+ char diff;
+
+ atomic_inc(&acb->rq_map_token);
+ if (readl(signature) == ARCMSR_SIGNATURE_GET_CONFIG) {
+ for (target = 0; target < ARCMSR_MAX_TARGETID - 1; target++) {
+ diff = (*acb_dev_map)^readb(devicemap);
+ if (diff != 0) {
+ char temp;
+ *acb_dev_map = readb(devicemap);
+ temp = *acb_dev_map;
+ for (lun = 0; lun < ARCMSR_MAX_TARGETLUN; lun++) {
+ if ((temp & 0x01) == 1 && (diff & 0x01) == 1) {
+ scsi_add_device(acb->host, 0, target, lun);
+ } else if ((temp & 0x01) == 0 && (diff & 0x01) == 1) {
+ psdev = scsi_device_lookup(acb->host, 0, target, lun);
+ if (psdev != NULL) {
+ scsi_remove_device(psdev);
+ scsi_device_put(psdev);
+ }
+ }
+ temp >>= 1;
+ diff >>= 1;
+ }
+ }
+ devicemap++;
+ acb_dev_map++;
+ }
+ }
+ }
+ }
+}
static int arcmsr_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
@@ -432,17 +504,17 @@
ACB_F_MESSAGE_WQBUFFER_READED);
acb->acb_flags &= ~ACB_F_SCSISTOPADAPTER;
INIT_LIST_HEAD(&acb->ccb_free_list);
-
+ INIT_WORK(&acb->arcmsr_do_message_isr_bh, arcmsr_message_isr_bh_fn);
error = arcmsr_alloc_ccb_pool(acb);
if (error)
goto out_release_regions;
+ arcmsr_iop_init(acb);
error = request_irq(pdev->irq, arcmsr_do_interrupt,
IRQF_SHARED, "arcmsr", acb);
if (error)
goto out_free_ccb_pool;
- arcmsr_iop_init(acb);
pci_set_drvdata(pdev, host);
if (strncmp(acb->firm_version, "V1.42", 5) >= 0)
host->max_sectors= ARCMSR_MAX_XFER_SECTORS_B;
@@ -459,6 +531,14 @@
#ifdef CONFIG_SCSI_ARCMSR_AER
pci_enable_pcie_error_reporting(pdev);
#endif
+ atomic_set(&acb->rq_map_token, 16);
+ acb->fw_state = true;
+ init_timer(&acb->eternal_timer);
+ acb->eternal_timer.expires = jiffies + msecs_to_jiffies(10*HZ);
+ acb->eternal_timer.data = (unsigned long) acb;
+ acb->eternal_timer.function = &arcmsr_request_device_map;
+ add_timer(&acb->eternal_timer);
+
return 0;
out_free_sysfs:
out_free_irq:
@@ -518,40 +598,48 @@
return 0xff;
}
-static void arcmsr_abort_hba_allcmd(struct AdapterControlBlock *acb)
+static uint8_t arcmsr_abort_hba_allcmd(struct AdapterControlBlock *acb)
{
struct MessageUnit_A __iomem *reg = acb->pmuA;
writel(ARCMSR_INBOUND_MESG0_ABORT_CMD, ®->inbound_msgaddr0);
- if (arcmsr_hba_wait_msgint_ready(acb))
+ if (arcmsr_hba_wait_msgint_ready(acb)) {
printk(KERN_NOTICE
"arcmsr%d: wait 'abort all outstanding command' timeout \n"
, acb->host->host_no);
+ return 0xff;
+ }
+ return 0x00;
}
-static void arcmsr_abort_hbb_allcmd(struct AdapterControlBlock *acb)
+static uint8_t arcmsr_abort_hbb_allcmd(struct AdapterControlBlock *acb)
{
struct MessageUnit_B *reg = acb->pmuB;
writel(ARCMSR_MESSAGE_ABORT_CMD, reg->drv2iop_doorbell_reg);
- if (arcmsr_hbb_wait_msgint_ready(acb))
+ if (arcmsr_hbb_wait_msgint_ready(acb)) {
printk(KERN_NOTICE
"arcmsr%d: wait 'abort all outstanding command' timeout \n"
, acb->host->host_no);
+ return 0xff;
+ }
+ return 0x00;
}
-static void arcmsr_abort_allcmd(struct AdapterControlBlock *acb)
+static uint8_t arcmsr_abort_allcmd(struct AdapterControlBlock *acb)
{
+ uint8_t rtnval = 0;
switch (acb->adapter_type) {
case ACB_ADAPTER_TYPE_A: {
- arcmsr_abort_hba_allcmd(acb);
+ rtnval = arcmsr_abort_hba_allcmd(acb);
}
break;
case ACB_ADAPTER_TYPE_B: {
- arcmsr_abort_hbb_allcmd(acb);
+ rtnval = arcmsr_abort_hbb_allcmd(acb);
}
}
+ return rtnval;
}
static void arcmsr_pci_unmap_dma(struct CommandControlBlock *ccb)
@@ -649,8 +737,7 @@
case ACB_ADAPTER_TYPE_A : {
struct MessageUnit_A __iomem *reg = acb->pmuA;
- orig_mask = readl(®->outbound_intmask)|\
- ARCMSR_MU_OUTBOUND_MESSAGE0_INTMASKENABLE;
+ orig_mask = readl(®->outbound_intmask);
writel(orig_mask|ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE, \
®->outbound_intmask);
}
@@ -658,8 +745,7 @@
case ACB_ADAPTER_TYPE_B : {
struct MessageUnit_B *reg = acb->pmuB;
- orig_mask = readl(reg->iop2drv_doorbell_mask_reg) & \
- (~ARCMSR_IOP2DRV_MESSAGE_CMD_DONE);
+ orig_mask = readl(reg->iop2drv_doorbell_mask_reg);
writel(0, reg->iop2drv_doorbell_mask_reg);
}
break;
@@ -795,12 +881,13 @@
struct AdapterControlBlock *acb =
(struct AdapterControlBlock *) host->hostdata;
int poll_count = 0;
-
arcmsr_free_sysfs_attr(acb);
scsi_remove_host(host);
+ flush_scheduled_work();
+ del_timer_sync(&acb->eternal_timer);
+ arcmsr_disable_outbound_ints(acb);
arcmsr_stop_adapter_bgrb(acb);
arcmsr_flush_adapter_cache(acb);
- arcmsr_disable_outbound_ints(acb);
acb->acb_flags |= ACB_F_SCSISTOPADAPTER;
acb->acb_flags &= ~ACB_F_IOP_INITED;
@@ -841,7 +928,9 @@
struct Scsi_Host *host = pci_get_drvdata(pdev);
struct AdapterControlBlock *acb =
(struct AdapterControlBlock *)host->hostdata;
-
+ del_timer_sync(&acb->eternal_timer);
+ arcmsr_disable_outbound_ints(acb);
+ flush_scheduled_work();
arcmsr_stop_adapter_bgrb(acb);
arcmsr_flush_adapter_cache(acb);
}
@@ -861,7 +950,7 @@
module_init(arcmsr_module_init);
module_exit(arcmsr_module_exit);
-static void arcmsr_enable_outbound_ints(struct AdapterControlBlock *acb, \
+static void arcmsr_enable_outbound_ints(struct AdapterControlBlock *acb,
u32 intmask_org)
{
u32 mask;
@@ -871,7 +960,8 @@
case ACB_ADAPTER_TYPE_A : {
struct MessageUnit_A __iomem *reg = acb->pmuA;
mask = intmask_org & ~(ARCMSR_MU_OUTBOUND_POSTQUEUE_INTMASKENABLE |
- ARCMSR_MU_OUTBOUND_DOORBELL_INTMASKENABLE);
+ ARCMSR_MU_OUTBOUND_DOORBELL_INTMASKENABLE|
+ ARCMSR_MU_OUTBOUND_MESSAGE0_INTMASKENABLE);
writel(mask, ®->outbound_intmask);
acb->outbound_int_enable = ~(intmask_org & mask) & 0x000000ff;
}
@@ -879,8 +969,10 @@
case ACB_ADAPTER_TYPE_B : {
struct MessageUnit_B *reg = acb->pmuB;
- mask = intmask_org | (ARCMSR_IOP2DRV_DATA_WRITE_OK | \
- ARCMSR_IOP2DRV_DATA_READ_OK | ARCMSR_IOP2DRV_CDB_DONE);
+ mask = intmask_org | (ARCMSR_IOP2DRV_DATA_WRITE_OK |
+ ARCMSR_IOP2DRV_DATA_READ_OK |
+ ARCMSR_IOP2DRV_CDB_DONE |
+ ARCMSR_IOP2DRV_MESSAGE_CMD_DONE);
writel(mask, reg->iop2drv_doorbell_mask_reg);
acb->outbound_int_enable = (intmask_org | mask) & 0x0000000f;
}
@@ -1048,8 +1140,8 @@
}
case ACB_ADAPTER_TYPE_B: {
struct MessageUnit_B *reg = acb->pmuB;
- iounmap(reg->drv2iop_doorbell_reg - ARCMSR_DRV2IOP_DOORBELL);
- iounmap(reg->ioctl_wbuffer_reg - ARCMSR_IOCTL_WBUFFER);
+ iounmap((u8 *)reg->drv2iop_doorbell_reg - ARCMSR_DRV2IOP_DOORBELL);
+ iounmap((u8 *)reg->ioctl_wbuffer_reg - ARCMSR_IOCTL_WBUFFER);
dma_free_coherent(&acb->pdev->dev,
(ARCMSR_MAX_FREECCB_NUM * sizeof(struct CommandControlBlock) + 0x20 +
sizeof(struct MessageUnit_B)), acb->dma_coherent, acb->dma_coherent_handle);
@@ -1249,13 +1341,36 @@
reg->doneq_index = index;
}
}
+/*
+**********************************************************************************
+** Handle a message interrupt
+**
+** The only message interrupt we expect is in response to a query for the current adapter config.
+** We want this in order to compare the drivemap so that we can detect newly-attached drives.
+**********************************************************************************
+*/
+static void arcmsr_hba_message_isr(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit_A *reg = acb->pmuA;
+ /*clear interrupt and message state*/
+ writel(ARCMSR_MU_OUTBOUND_MESSAGE0_INT, ®->outbound_intstatus);
+ schedule_work(&acb->arcmsr_do_message_isr_bh);
+}
+static void arcmsr_hbb_message_isr(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit_B *reg = acb->pmuB;
+
+ /*clear interrupt and message state*/
+ writel(ARCMSR_MESSAGE_INT_CLEAR_PATTERN, reg->iop2drv_doorbell_reg);
+ schedule_work(&acb->arcmsr_do_message_isr_bh);
+}
static int arcmsr_handle_hba_isr(struct AdapterControlBlock *acb)
{
uint32_t outbound_intstatus;
struct MessageUnit_A __iomem *reg = acb->pmuA;
- outbound_intstatus = readl(®->outbound_intstatus) & \
+ outbound_intstatus = readl(®->outbound_intstatus) &
acb->outbound_int_enable;
if (!(outbound_intstatus & ARCMSR_MU_OUTBOUND_HANDLE_INT)) {
return 1;
@@ -1267,6 +1382,10 @@
if (outbound_intstatus & ARCMSR_MU_OUTBOUND_POSTQUEUE_INT) {
arcmsr_hba_postqueue_isr(acb);
}
+ if (outbound_intstatus & ARCMSR_MU_OUTBOUND_MESSAGE0_INT) {
+ /* messenger of "driver to iop commands" */
+ arcmsr_hba_message_isr(acb);
+ }
return 0;
}
@@ -1275,13 +1394,14 @@
uint32_t outbound_doorbell;
struct MessageUnit_B *reg = acb->pmuB;
- outbound_doorbell = readl(reg->iop2drv_doorbell_reg) & \
+ outbound_doorbell = readl(reg->iop2drv_doorbell_reg) &
acb->outbound_int_enable;
if (!outbound_doorbell)
return 1;
writel(~outbound_doorbell, reg->iop2drv_doorbell_reg);
- /*in case the last action of doorbell interrupt clearance is cached, this action can push HW to write down the clear bit*/
+ /*in case the last action of doorbell interrupt clearance is cached,
+ this action can push HW to write down the clear bit*/
readl(reg->iop2drv_doorbell_reg);
writel(ARCMSR_DRV2IOP_END_OF_INTERRUPT, reg->drv2iop_doorbell_reg);
if (outbound_doorbell & ARCMSR_IOP2DRV_DATA_WRITE_OK) {
@@ -1293,6 +1413,10 @@
if (outbound_doorbell & ARCMSR_IOP2DRV_CDB_DONE) {
arcmsr_hbb_postqueue_isr(acb);
}
+ if (outbound_doorbell & ARCMSR_IOP2DRV_MESSAGE_CMD_DONE) {
+ /* messenger of "driver to iop commands" */
+ arcmsr_hbb_message_isr(acb);
+ }
return 0;
}
@@ -1360,7 +1484,7 @@
}
}
-static int arcmsr_iop_message_xfer(struct AdapterControlBlock *acb, \
+static int arcmsr_iop_message_xfer(struct AdapterControlBlock *acb,
struct scsi_cmnd *cmd)
{
struct CMD_MESSAGE_FIELD *pcmdmessagefld;
@@ -1398,6 +1522,13 @@
retvalue = ARCMSR_MESSAGE_FAIL;
goto message_out;
}
+
+ if (!acb->fw_state) {
+ pcmdmessagefld->cmdmessage.ReturnCode =
+ ARCMSR_MESSAGE_RETURNCODE_BUS_HANG_ON;
+ goto message_out;
+ }
+
ptmpQbuffer = ver_addr;
while ((acb->rqbuf_firstindex != acb->rqbuf_lastindex)
&& (allxfer_len < 1031)) {
@@ -1444,6 +1575,12 @@
retvalue = ARCMSR_MESSAGE_FAIL;
goto message_out;
}
+ if (!acb->fw_state) {
+ pcmdmessagefld->cmdmessage.ReturnCode =
+ ARCMSR_MESSAGE_RETURNCODE_BUS_HANG_ON;
+ goto message_out;
+ }
+
ptmpuserbuffer = ver_addr;
user_len = pcmdmessagefld->cmdmessage.Length;
memcpy(ptmpuserbuffer, pcmdmessagefld->messagedatabuffer, user_len);
@@ -1496,6 +1633,11 @@
case ARCMSR_MESSAGE_CLEAR_RQBUFFER: {
uint8_t *pQbuffer = acb->rqbuffer;
+ if (!acb->fw_state) {
+ pcmdmessagefld->cmdmessage.ReturnCode =
+ ARCMSR_MESSAGE_RETURNCODE_BUS_HANG_ON;
+ goto message_out;
+ }
if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) {
acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW;
@@ -1511,6 +1653,11 @@
case ARCMSR_MESSAGE_CLEAR_WQBUFFER: {
uint8_t *pQbuffer = acb->wqbuffer;
+ if (!acb->fw_state) {
+ pcmdmessagefld->cmdmessage.ReturnCode =
+ ARCMSR_MESSAGE_RETURNCODE_BUS_HANG_ON;
+ goto message_out;
+ }
if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) {
acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW;
@@ -1529,6 +1676,11 @@
case ARCMSR_MESSAGE_CLEAR_ALLQBUFFER: {
uint8_t *pQbuffer;
+ if (!acb->fw_state) {
+ pcmdmessagefld->cmdmessage.ReturnCode =
+ ARCMSR_MESSAGE_RETURNCODE_BUS_HANG_ON;
+ goto message_out;
+ }
if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) {
acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW;
@@ -1551,13 +1703,22 @@
break;
case ARCMSR_MESSAGE_RETURN_CODE_3F: {
+ if (!acb->fw_state) {
+ pcmdmessagefld->cmdmessage.ReturnCode =
+ ARCMSR_MESSAGE_RETURNCODE_BUS_HANG_ON;
+ goto message_out;
+ }
pcmdmessagefld->cmdmessage.ReturnCode = ARCMSR_MESSAGE_RETURNCODE_3F;
}
break;
case ARCMSR_MESSAGE_SAY_HELLO: {
int8_t *hello_string = "Hello! I am ARCMSR";
-
+ if (!acb->fw_state) {
+ pcmdmessagefld->cmdmessage.ReturnCode =
+ ARCMSR_MESSAGE_RETURNCODE_BUS_HANG_ON;
+ goto message_out;
+ }
memcpy(pcmdmessagefld->messagedatabuffer, hello_string
, (int16_t)strlen(hello_string));
pcmdmessagefld->cmdmessage.ReturnCode = ARCMSR_MESSAGE_RETURNCODE_OK;
@@ -1565,10 +1726,20 @@
break;
case ARCMSR_MESSAGE_SAY_GOODBYE:
+ if (!acb->fw_state) {
+ pcmdmessagefld->cmdmessage.ReturnCode =
+ ARCMSR_MESSAGE_RETURNCODE_BUS_HANG_ON;
+ goto message_out;
+ }
arcmsr_iop_parking(acb);
break;
case ARCMSR_MESSAGE_FLUSH_ADAPTER_CACHE:
+ if (!acb->fw_state) {
+ pcmdmessagefld->cmdmessage.ReturnCode =
+ ARCMSR_MESSAGE_RETURNCODE_BUS_HANG_ON;
+ goto message_out;
+ }
arcmsr_flush_adapter_cache(acb);
break;
@@ -1651,16 +1822,57 @@
struct CommandControlBlock *ccb;
int target = cmd->device->id;
int lun = cmd->device->lun;
-
+ uint8_t scsicmd = cmd->cmnd[0];
cmd->scsi_done = done;
cmd->host_scribble = NULL;
cmd->result = 0;
+
+ if ((scsicmd == SYNCHRONIZE_CACHE) || (scsicmd == SEND_DIAGNOSTIC)) {
+ if (acb->devstate[target][lun] == ARECA_RAID_GONE) {
+ cmd->result = (DID_NO_CONNECT << 16);
+ }
+ cmd->scsi_done(cmd);
+ return 0;
+ }
+
if (acb->acb_flags & ACB_F_BUS_RESET) {
- printk(KERN_NOTICE "arcmsr%d: bus reset"
- " and return busy \n"
- , acb->host->host_no);
+ switch (acb->adapter_type) {
+ case ACB_ADAPTER_TYPE_A: {
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
+ uint32_t intmask_org, outbound_doorbell;
+
+ if ((readl(®->outbound_msgaddr1) &
+ ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK) == 0) {
+ printk(KERN_NOTICE "arcmsr%d: bus reset and return busy\n",
+ acb->host->host_no);
return SCSI_MLQUEUE_HOST_BUSY;
}
+
+ acb->acb_flags &= ~ACB_F_FIRMWARE_TRAP;
+ printk(KERN_NOTICE "arcmsr%d: hardware bus reset and reset ok\n",
+ acb->host->host_no);
+ /* disable all outbound interrupt */
+ intmask_org = arcmsr_disable_outbound_ints(acb);
+ arcmsr_get_firmware_spec(acb, 1);
+ /*start background rebuild*/
+ arcmsr_start_adapter_bgrb(acb);
+ /* clear Qbuffer if door bell ringed */
+ outbound_doorbell = readl(®->outbound_doorbell);
+ /*clear interrupt */
+ writel(outbound_doorbell, ®->outbound_doorbell);
+ writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK,
+ ®->inbound_doorbell);
+ /* enable outbound Post Queue,outbound doorbell Interrupt */
+ arcmsr_enable_outbound_ints(acb, intmask_org);
+ acb->acb_flags |= ACB_F_IOP_INITED;
+ acb->acb_flags &= ~ACB_F_BUS_RESET;
+ }
+ break;
+ case ACB_ADAPTER_TYPE_B: {
+ }
+ }
+ }
+
if (target == 16) {
/* virtual device for iop message transfer */
arcmsr_handle_virtual_command(acb, cmd);
@@ -1699,21 +1911,25 @@
return 0;
}
-static void arcmsr_get_hba_config(struct AdapterControlBlock *acb)
+static void *arcmsr_get_hba_config(struct AdapterControlBlock *acb, int mode)
{
struct MessageUnit_A __iomem *reg = acb->pmuA;
char *acb_firm_model = acb->firm_model;
char *acb_firm_version = acb->firm_version;
+ char *acb_device_map = acb->device_map;
char __iomem *iop_firm_model = (char __iomem *)(®->message_rwbuffer[15]);
char __iomem *iop_firm_version = (char __iomem *)(®->message_rwbuffer[17]);
+ char __iomem *iop_device_map = (char __iomem *) (®->message_rwbuffer[21]);
int count;
writel(ARCMSR_INBOUND_MESG0_GET_CONFIG, ®->inbound_msgaddr0);
if (arcmsr_hba_wait_msgint_ready(acb)) {
printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware \
miscellaneous data' timeout \n", acb->host->host_no);
+ return NULL;
}
+ if (mode == 1) {
count = 8;
while (count) {
*acb_firm_model = readb(iop_firm_model);
@@ -1730,34 +1946,48 @@
count--;
}
+ count = 16;
+ while (count) {
+ *acb_device_map = readb(iop_device_map);
+ acb_device_map++;
+ iop_device_map++;
+ count--;
+ }
+
printk(KERN_INFO "ARECA RAID ADAPTER%d: FIRMWARE VERSION %s \n"
, acb->host->host_no
, acb->firm_version);
-
+ acb->signature = readl(®->message_rwbuffer[0]);
acb->firm_request_len = readl(®->message_rwbuffer[1]);
acb->firm_numbers_queue = readl(®->message_rwbuffer[2]);
acb->firm_sdram_size = readl(®->message_rwbuffer[3]);
acb->firm_hd_channels = readl(®->message_rwbuffer[4]);
}
-
-static void arcmsr_get_hbb_config(struct AdapterControlBlock *acb)
+ return reg->message_rwbuffer;
+}
+static void __iomem *arcmsr_get_hbb_config(struct AdapterControlBlock *acb, int mode)
{
struct MessageUnit_B *reg = acb->pmuB;
uint32_t __iomem *lrwbuffer = reg->msgcode_rwbuffer_reg;
char *acb_firm_model = acb->firm_model;
char *acb_firm_version = acb->firm_version;
+ char *acb_device_map = acb->device_map;
char __iomem *iop_firm_model = (char __iomem *)(&lrwbuffer[15]);
/*firm_model,15,60-67*/
char __iomem *iop_firm_version = (char __iomem *)(&lrwbuffer[17]);
/*firm_version,17,68-83*/
+ char __iomem *iop_device_map = (char __iomem *) (&lrwbuffer[21]);
+ /*firm_version,21,84-99*/
int count;
writel(ARCMSR_MESSAGE_GET_CONFIG, reg->drv2iop_doorbell_reg);
if (arcmsr_hbb_wait_msgint_ready(acb)) {
printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware \
miscellaneous data' timeout \n", acb->host->host_no);
+ return NULL;
}
+ if (mode == 1) {
count = 8;
while (count)
{
@@ -1776,11 +2006,20 @@
count--;
}
+ count = 16;
+ while (count) {
+ *acb_device_map = readb(iop_device_map);
+ acb_device_map++;
+ iop_device_map++;
+ count--;
+ }
+
printk(KERN_INFO "ARECA RAID ADAPTER%d: FIRMWARE VERSION %s \n",
acb->host->host_no,
acb->firm_version);
- lrwbuffer++;
+ acb->signature = readl(lrwbuffer++);
+ /*firm_signature,1,00-03*/
acb->firm_request_len = readl(lrwbuffer++);
/*firm_request_len,1,04-07*/
acb->firm_numbers_queue = readl(lrwbuffer++);
@@ -1790,20 +2029,23 @@
acb->firm_hd_channels = readl(lrwbuffer);
/*firm_ide_channels,4,16-19*/
}
-
-static void arcmsr_get_firmware_spec(struct AdapterControlBlock *acb)
+ return reg->msgcode_rwbuffer_reg;
+}
+static void *arcmsr_get_firmware_spec(struct AdapterControlBlock *acb, int mode)
{
+ void *rtnval = 0;
switch (acb->adapter_type) {
case ACB_ADAPTER_TYPE_A: {
- arcmsr_get_hba_config(acb);
+ rtnval = arcmsr_get_hba_config(acb, mode);
}
break;
case ACB_ADAPTER_TYPE_B: {
- arcmsr_get_hbb_config(acb);
+ rtnval = arcmsr_get_hbb_config(acb, mode);
}
break;
}
+ return rtnval;
}
static void arcmsr_polling_hba_ccbdone(struct AdapterControlBlock *acb,
@@ -2043,6 +2285,66 @@
}
}
+static void arcmsr_request_hba_device_map(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
+
+ if (unlikely(atomic_read(&acb->rq_map_token) == 0)) {
+ acb->fw_state = false;
+ } else {
+ /*to prevent rq_map_token from changing by other interrupt, then
+ avoid the dead-lock*/
+ acb->fw_state = true;
+ atomic_dec(&acb->rq_map_token);
+ if (!(acb->fw_state) ||
+ (acb->ante_token_value == atomic_read(&acb->rq_map_token))) {
+ atomic_set(&acb->rq_map_token, 16);
+ }
+ acb->ante_token_value = atomic_read(&acb->rq_map_token);
+ writel(ARCMSR_INBOUND_MESG0_GET_CONFIG, ®->inbound_msgaddr0);
+ }
+ mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6000));
+ return;
+}
+
+static void arcmsr_request_hbb_device_map(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit_B __iomem *reg = acb->pmuB;
+
+ if (unlikely(atomic_read(&acb->rq_map_token) == 0)) {
+ acb->fw_state = false;
+ } else {
+ /*to prevent rq_map_token from changing by other interrupt, then
+ avoid the dead-lock*/
+ acb->fw_state = true;
+ atomic_dec(&acb->rq_map_token);
+ if (!(acb->fw_state) ||
+ (acb->ante_token_value == atomic_read(&acb->rq_map_token))) {
+ atomic_set(&acb->rq_map_token, 16);
+ }
+ acb->ante_token_value = atomic_read(&acb->rq_map_token);
+ writel(ARCMSR_MESSAGE_GET_CONFIG, reg->drv2iop_doorbell_reg);
+ }
+ mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6000));
+ return;
+}
+
+static void arcmsr_request_device_map(unsigned long pacb)
+{
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *)pacb;
+
+ switch (acb->adapter_type) {
+ case ACB_ADAPTER_TYPE_A: {
+ arcmsr_request_hba_device_map(acb);
+ }
+ break;
+ case ACB_ADAPTER_TYPE_B: {
+ arcmsr_request_hbb_device_map(acb);
+ }
+ break;
+ }
+}
+
static void arcmsr_start_hba_bgrb(struct AdapterControlBlock *acb)
{
struct MessageUnit_A __iomem *reg = acb->pmuA;
@@ -2121,6 +2423,60 @@
return;
}
+static void arcmsr_hardware_reset(struct AdapterControlBlock *acb)
+{
+ uint8_t value[64];
+ int i;
+
+ /* backup pci config data */
+ for (i = 0; i < 64; i++) {
+ pci_read_config_byte(acb->pdev, i, &value[i]);
+ }
+ /* hardware reset signal */
+ pci_write_config_byte(acb->pdev, 0x84, 0x20);
+ msleep(1000);
+ /* write back pci config data */
+ for (i = 0; i < 64; i++) {
+ pci_write_config_byte(acb->pdev, i, value[i]);
+ }
+ msleep(1000);
+ return;
+}
+/*
+****************************************************************************
+****************************************************************************
+*/
+#ifdef CONFIG_SCSI_ARCMSR_RESET
+ int arcmsr_sleep_for_bus_reset(struct scsi_cmnd *cmd)
+ {
+ struct Scsi_Host *shost = NULL;
+ spinlock_t *host_lock = NULL;
+ int i, isleep;
+
+ shost = cmd->device->host;
+ host_lock = shost->host_lock;
+
+ printk(KERN_NOTICE "Host %d bus reset over, sleep %d seconds (busy %d, can queue %d) ...........\n",
+ shost->host_no, sleeptime, shost->host_busy, shost->can_queue);
+ isleep = sleeptime / 10;
+ spin_unlock_irq(host_lock);
+ if (isleep > 0) {
+ for (i = 0; i < isleep; i++) {
+ msleep(10000);
+ printk(KERN_NOTICE "^%d^\n", i);
+ }
+ }
+
+ isleep = sleeptime % 10;
+ if (isleep > 0) {
+ msleep(isleep * 1000);
+ printk(KERN_NOTICE "^v^\n");
+ }
+ spin_lock_irq(host_lock);
+ printk(KERN_NOTICE "***** wake up *****\n");
+ return 0;
+ }
+#endif
static void arcmsr_iop_init(struct AdapterControlBlock *acb)
{
uint32_t intmask_org;
@@ -2129,7 +2485,7 @@
intmask_org = arcmsr_disable_outbound_ints(acb);
arcmsr_wait_firmware_ready(acb);
arcmsr_iop_confirm(acb);
- arcmsr_get_firmware_spec(acb);
+ arcmsr_get_firmware_spec(acb, 1);
/*start background rebuild*/
arcmsr_start_adapter_bgrb(acb);
/* empty doorbell Qbuffer if door bell ringed */
@@ -2140,51 +2496,110 @@
acb->acb_flags |= ACB_F_IOP_INITED;
}
-static void arcmsr_iop_reset(struct AdapterControlBlock *acb)
+static uint8_t arcmsr_iop_reset(struct AdapterControlBlock *acb)
{
struct CommandControlBlock *ccb;
uint32_t intmask_org;
+ uint8_t rtnval = 0x00;
int i = 0;
if (atomic_read(&acb->ccboutstandingcount) != 0) {
- /* talk to iop 331 outstanding command aborted */
- arcmsr_abort_allcmd(acb);
-
- /* wait for 3 sec for all command aborted*/
- ssleep(3);
-
/* disable all outbound interrupt */
intmask_org = arcmsr_disable_outbound_ints(acb);
+ /* talk to iop 331 outstanding command aborted */
+ rtnval = arcmsr_abort_allcmd(acb);
+ /* wait for 3 sec for all command aborted*/
+ ssleep(3);
/* clear all outbound posted Q */
arcmsr_done4abort_postqueue(acb);
for (i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++) {
ccb = acb->pccb_pool[i];
if (ccb->startdone == ARCMSR_CCB_START) {
- ccb->startdone = ARCMSR_CCB_ABORTED;
arcmsr_ccb_complete(ccb, 1);
}
}
+ atomic_set(&acb->ccboutstandingcount, 0);
/* enable all outbound interrupt */
arcmsr_enable_outbound_ints(acb, intmask_org);
+ return rtnval;
}
+ return rtnval;
}
static int arcmsr_bus_reset(struct scsi_cmnd *cmd)
{
struct AdapterControlBlock *acb =
(struct AdapterControlBlock *)cmd->device->host->hostdata;
- int i;
+ int retry = 0;
- acb->num_resets++;
+ if (acb->acb_flags & ACB_F_BUS_RESET)
+ return SUCCESS;
+
+ printk(KERN_NOTICE "arcmsr%d: bus reset ..... \n", acb->adapter_index);
acb->acb_flags |= ACB_F_BUS_RESET;
- for (i = 0; i < 400; i++) {
- if (!atomic_read(&acb->ccboutstandingcount))
- break;
- arcmsr_interrupt(acb);/* FIXME: need spinlock */
- msleep(25);
+ acb->num_resets++;
+ while (atomic_read(&acb->ccboutstandingcount) != 0 && retry < 4) {
+ arcmsr_interrupt(acb);
+ retry++;
}
- arcmsr_iop_reset(acb);
+
+ if (arcmsr_iop_reset(acb)) {
+ switch (acb->adapter_type) {
+ case ACB_ADAPTER_TYPE_A: {
+ printk(KERN_NOTICE "arcmsr%d: do hardware bus reset, num_resets = %d num_aborts = %d \n",
+ acb->adapter_index, acb->num_resets, acb->num_aborts);
+ arcmsr_hardware_reset(acb);
+ acb->acb_flags |= ACB_F_FIRMWARE_TRAP;
+ acb->acb_flags &= ~ACB_F_IOP_INITED;
+ #ifdef CONFIG_SCSI_ARCMSR_RESET
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
+ uint32_t intmask_org, outbound_doorbell;
+ int retry_count = 0;
+sleep_again:
+ arcmsr_sleep_for_bus_reset(cmd);
+ if ((readl(®->outbound_msgaddr1) &
+ ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK) == 0) {
+ printk(KERN_NOTICE "arcmsr%d: hardware bus reset and return busy, retry=%d \n",
+ acb->host->host_no, retry_count);
+ if (retry_count > retrycount) {
+ printk(KERN_NOTICE "arcmsr%d: hardware bus reset and return busy, retry aborted \n",
+ acb->host->host_no);
+ return SUCCESS;
+ }
+ retry_count++;
+ goto sleep_again;
+ }
+ acb->acb_flags &= ~ACB_F_FIRMWARE_TRAP;
+ acb->acb_flags |= ACB_F_IOP_INITED;
+ acb->acb_flags &= ~ACB_F_BUS_RESET;
+ printk(KERN_NOTICE "arcmsr%d: hardware bus reset and reset ok \n",
+ acb->host->host_no);
+ /* disable all outbound interrupt */
+ intmask_org = arcmsr_disable_outbound_ints(acb);
+ arcmsr_get_firmware_spec(acb, 1);
+ /*start background rebuild*/
+ arcmsr_start_adapter_bgrb(acb);
+ /* clear Qbuffer if door bell ringed */
+ outbound_doorbell = readl(®->outbound_doorbell);
+ writel(outbound_doorbell, ®->outbound_doorbell); /*clear interrupt */
+ writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK, ®->inbound_doorbell);
+ /* enable outbound Post Queue,outbound doorbell Interrupt */
+ arcmsr_enable_outbound_ints(acb, intmask_org);
+ atomic_set(&acb->rq_map_token, 16);
+ init_timer(&acb->eternal_timer);
+ acb->eternal_timer.expires = jiffies + msecs_to_jiffies(20*HZ);
+ acb->eternal_timer.data = (unsigned long) acb;
+ acb->eternal_timer.function = &arcmsr_request_device_map;
+ add_timer(&acb->eternal_timer);
+ #endif
+ }
+ break;
+ case ACB_ADAPTER_TYPE_B: {
+ }
+ }
+ } else {
acb->acb_flags &= ~ACB_F_BUS_RESET;
+ }
return SUCCESS;
}
@@ -2277,98 +2692,3 @@
ARCMSR_DRIVER_VERSION);
return buf;
}
-#ifdef CONFIG_SCSI_ARCMSR_AER
-static pci_ers_result_t arcmsr_pci_slot_reset(struct pci_dev *pdev)
-{
- struct Scsi_Host *host = pci_get_drvdata(pdev);
- struct AdapterControlBlock *acb =
- (struct AdapterControlBlock *) host->hostdata;
- uint32_t intmask_org;
- int i, j;
-
- if (pci_enable_device(pdev)) {
- return PCI_ERS_RESULT_DISCONNECT;
- }
- pci_set_master(pdev);
- intmask_org = arcmsr_disable_outbound_ints(acb);
- acb->acb_flags |= (ACB_F_MESSAGE_WQBUFFER_CLEARED |
- ACB_F_MESSAGE_RQBUFFER_CLEARED |
- ACB_F_MESSAGE_WQBUFFER_READED);
- acb->acb_flags &= ~ACB_F_SCSISTOPADAPTER;
- for (i = 0; i < ARCMSR_MAX_TARGETID; i++)
- for (j = 0; j < ARCMSR_MAX_TARGETLUN; j++)
- acb->devstate[i][j] = ARECA_RAID_GONE;
-
- arcmsr_wait_firmware_ready(acb);
- arcmsr_iop_confirm(acb);
- /* disable all outbound interrupt */
- arcmsr_get_firmware_spec(acb);
- /*start background rebuild*/
- arcmsr_start_adapter_bgrb(acb);
- /* empty doorbell Qbuffer if door bell ringed */
- arcmsr_clear_doorbell_queue_buffer(acb);
- arcmsr_enable_eoi_mode(acb);
- /* enable outbound Post Queue,outbound doorbell Interrupt */
- arcmsr_enable_outbound_ints(acb, intmask_org);
- acb->acb_flags |= ACB_F_IOP_INITED;
-
- pci_enable_pcie_error_reporting(pdev);
- return PCI_ERS_RESULT_RECOVERED;
-}
-
-static void arcmsr_pci_ers_need_reset_forepart(struct pci_dev *pdev)
-{
- struct Scsi_Host *host = pci_get_drvdata(pdev);
- struct AdapterControlBlock *acb = (struct AdapterControlBlock *)host->hostdata;
- struct CommandControlBlock *ccb;
- uint32_t intmask_org;
- int i = 0;
-
- if (atomic_read(&acb->ccboutstandingcount) != 0) {
- /* talk to iop 331 outstanding command aborted */
- arcmsr_abort_allcmd(acb);
- /* wait for 3 sec for all command aborted*/
- ssleep(3);
- /* disable all outbound interrupt */
- intmask_org = arcmsr_disable_outbound_ints(acb);
- /* clear all outbound posted Q */
- arcmsr_done4abort_postqueue(acb);
- for (i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++) {
- ccb = acb->pccb_pool[i];
- if (ccb->startdone == ARCMSR_CCB_START) {
- ccb->startdone = ARCMSR_CCB_ABORTED;
- arcmsr_ccb_complete(ccb, 1);
- }
- }
- /* enable all outbound interrupt */
- arcmsr_enable_outbound_ints(acb, intmask_org);
- }
- pci_disable_device(pdev);
-}
-
-static void arcmsr_pci_ers_disconnect_forepart(struct pci_dev *pdev)
-{
- struct Scsi_Host *host = pci_get_drvdata(pdev);
- struct AdapterControlBlock *acb = \
- (struct AdapterControlBlock *)host->hostdata;
-
- arcmsr_stop_adapter_bgrb(acb);
- arcmsr_flush_adapter_cache(acb);
-}
-
-static pci_ers_result_t arcmsr_pci_error_detected(struct pci_dev *pdev,
- pci_channel_state_t state)
-{
- switch (state) {
- case pci_channel_io_frozen:
- arcmsr_pci_ers_need_reset_forepart(pdev);
- return PCI_ERS_RESULT_NEED_RESET;
- case pci_channel_io_perm_failure:
- arcmsr_pci_ers_disconnect_forepart(pdev);
- return PCI_ERS_RESULT_DISCONNECT;
- break;
- default:
- return PCI_ERS_RESULT_NEED_RESET;
- }
-}
-#endif
diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index e641922..350cbea 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -167,10 +167,9 @@
&nonemb_cmd.dma);
if (nonemb_cmd.va == NULL) {
SE_DEBUG(DBG_LVL_1,
- "Failed to allocate memory for"
- "mgmt_invalidate_icds \n");
+ "Failed to allocate memory for mgmt_invalidate_icds\n");
spin_unlock(&ctrl->mbox_lock);
- return -1;
+ return 0;
}
nonemb_cmd.size = sizeof(struct invalidate_commands_params_in);
req = nonemb_cmd.va;
diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c
index 0c08e18..3a7b3f8 100644
--- a/drivers/scsi/bfa/bfa_core.c
+++ b/drivers/scsi/bfa/bfa_core.c
@@ -84,11 +84,32 @@
for (i = 0; hal_mods[i]; i++)
hal_mods[i]->meminfo(cfg, &km_len, &dm_len);
+ dm_len += bfa_port_meminfo();
meminfo->meminfo[BFA_MEM_TYPE_KVA - 1].mem_len = km_len;
meminfo->meminfo[BFA_MEM_TYPE_DMA - 1].mem_len = dm_len;
}
+static void
+bfa_com_port_attach(struct bfa_s *bfa, struct bfa_meminfo_s *mi)
+{
+ struct bfa_port_s *port = &bfa->modules.port;
+ uint32_t dm_len;
+ uint8_t *dm_kva;
+ uint64_t dm_pa;
+
+ dm_len = bfa_port_meminfo();
+ dm_kva = bfa_meminfo_dma_virt(mi);
+ dm_pa = bfa_meminfo_dma_phys(mi);
+
+ memset(port, 0, sizeof(struct bfa_port_s));
+ bfa_port_attach(port, &bfa->ioc, bfa, bfa->trcmod, bfa->logm);
+ bfa_port_mem_claim(port, dm_kva, dm_pa);
+
+ bfa_meminfo_dma_virt(mi) = dm_kva + dm_len;
+ bfa_meminfo_dma_phys(mi) = dm_pa + dm_len;
+}
+
/**
* Use this function to do attach the driver instance with the BFA
* library. This function will not trigger any HW initialization
@@ -140,6 +161,7 @@
for (i = 0; hal_mods[i]; i++)
hal_mods[i]->attach(bfa, bfad, cfg, meminfo, pcidev);
+ bfa_com_port_attach(bfa, meminfo);
}
/**
diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c
index 18b7102..2ce26eb 100644
--- a/drivers/scsi/gvp11.c
+++ b/drivers/scsi/gvp11.c
@@ -1,36 +1,35 @@
#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/zorro.h>
-#include <asm/setup.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/amigaints.h>
#include <asm/amigahw.h>
-#include <linux/zorro.h>
-#include <asm/irq.h>
-#include <linux/spinlock.h>
#include "scsi.h"
-#include <scsi/scsi_host.h>
#include "wd33c93.h"
#include "gvp11.h"
-#include <linux/stat.h>
+#define CHECK_WD33C93
-#define DMA(ptr) ((gvp11_scsiregs *)((ptr)->base))
+struct gvp11_hostdata {
+ struct WD33C93_hostdata wh;
+ struct gvp11_scsiregs *regs;
+};
-static irqreturn_t gvp11_intr(int irq, void *_instance)
+static irqreturn_t gvp11_intr(int irq, void *data)
{
+ struct Scsi_Host *instance = data;
+ struct gvp11_hostdata *hdata = shost_priv(instance);
+ unsigned int status = hdata->regs->CNTR;
unsigned long flags;
- unsigned int status;
- struct Scsi_Host *instance = (struct Scsi_Host *)_instance;
- status = DMA(instance)->CNTR;
if (!(status & GVP11_DMAC_INT_PENDING))
return IRQ_NONE;
@@ -50,64 +49,66 @@
static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
{
struct Scsi_Host *instance = cmd->device->host;
- struct WD33C93_hostdata *hdata = shost_priv(instance);
+ struct gvp11_hostdata *hdata = shost_priv(instance);
+ struct WD33C93_hostdata *wh = &hdata->wh;
+ struct gvp11_scsiregs *regs = hdata->regs;
unsigned short cntr = GVP11_DMAC_INT_ENABLE;
unsigned long addr = virt_to_bus(cmd->SCp.ptr);
int bank_mask;
static int scsi_alloc_out_of_range = 0;
/* use bounce buffer if the physical address is bad */
- if (addr & hdata->dma_xfer_mask) {
- hdata->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff;
+ if (addr & wh->dma_xfer_mask) {
+ wh->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff;
if (!scsi_alloc_out_of_range) {
- hdata->dma_bounce_buffer =
- kmalloc(hdata->dma_bounce_len, GFP_KERNEL);
- hdata->dma_buffer_pool = BUF_SCSI_ALLOCED;
+ wh->dma_bounce_buffer =
+ kmalloc(wh->dma_bounce_len, GFP_KERNEL);
+ wh->dma_buffer_pool = BUF_SCSI_ALLOCED;
}
if (scsi_alloc_out_of_range ||
- !hdata->dma_bounce_buffer) {
- hdata->dma_bounce_buffer =
- amiga_chip_alloc(hdata->dma_bounce_len,
+ !wh->dma_bounce_buffer) {
+ wh->dma_bounce_buffer =
+ amiga_chip_alloc(wh->dma_bounce_len,
"GVP II SCSI Bounce Buffer");
- if (!hdata->dma_bounce_buffer) {
- hdata->dma_bounce_len = 0;
+ if (!wh->dma_bounce_buffer) {
+ wh->dma_bounce_len = 0;
return 1;
}
- hdata->dma_buffer_pool = BUF_CHIP_ALLOCED;
+ wh->dma_buffer_pool = BUF_CHIP_ALLOCED;
}
/* check if the address of the bounce buffer is OK */
- addr = virt_to_bus(hdata->dma_bounce_buffer);
+ addr = virt_to_bus(wh->dma_bounce_buffer);
- if (addr & hdata->dma_xfer_mask) {
+ if (addr & wh->dma_xfer_mask) {
/* fall back to Chip RAM if address out of range */
- if (hdata->dma_buffer_pool == BUF_SCSI_ALLOCED) {
- kfree(hdata->dma_bounce_buffer);
+ if (wh->dma_buffer_pool == BUF_SCSI_ALLOCED) {
+ kfree(wh->dma_bounce_buffer);
scsi_alloc_out_of_range = 1;
} else {
- amiga_chip_free(hdata->dma_bounce_buffer);
+ amiga_chip_free(wh->dma_bounce_buffer);
}
- hdata->dma_bounce_buffer =
- amiga_chip_alloc(hdata->dma_bounce_len,
+ wh->dma_bounce_buffer =
+ amiga_chip_alloc(wh->dma_bounce_len,
"GVP II SCSI Bounce Buffer");
- if (!hdata->dma_bounce_buffer) {
- hdata->dma_bounce_len = 0;
+ if (!wh->dma_bounce_buffer) {
+ wh->dma_bounce_len = 0;
return 1;
}
- addr = virt_to_bus(hdata->dma_bounce_buffer);
- hdata->dma_buffer_pool = BUF_CHIP_ALLOCED;
+ addr = virt_to_bus(wh->dma_bounce_buffer);
+ wh->dma_buffer_pool = BUF_CHIP_ALLOCED;
}
if (!dir_in) {
/* copy to bounce buffer for a write */
- memcpy(hdata->dma_bounce_buffer, cmd->SCp.ptr,
+ memcpy(wh->dma_bounce_buffer, cmd->SCp.ptr,
cmd->SCp.this_residual);
}
}
@@ -116,11 +117,11 @@
if (!dir_in)
cntr |= GVP11_DMAC_DIR_WRITE;
- hdata->dma_dir = dir_in;
- DMA(cmd->device->host)->CNTR = cntr;
+ wh->dma_dir = dir_in;
+ regs->CNTR = cntr;
/* setup DMA *physical* address */
- DMA(cmd->device->host)->ACR = addr;
+ regs->ACR = addr;
if (dir_in) {
/* invalidate any cache */
@@ -130,12 +131,12 @@
cache_push(addr, cmd->SCp.this_residual);
}
- bank_mask = (~hdata->dma_xfer_mask >> 18) & 0x01c0;
+ bank_mask = (~wh->dma_xfer_mask >> 18) & 0x01c0;
if (bank_mask)
- DMA(cmd->device->host)->BANK = bank_mask & (addr >> 18);
+ regs->BANK = bank_mask & (addr >> 18);
/* start DMA */
- DMA(cmd->device->host)->ST_DMA = 1;
+ regs->ST_DMA = 1;
/* return success */
return 0;
@@ -144,236 +145,53 @@
static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
int status)
{
- struct WD33C93_hostdata *hdata = shost_priv(instance);
+ struct gvp11_hostdata *hdata = shost_priv(instance);
+ struct WD33C93_hostdata *wh = &hdata->wh;
+ struct gvp11_scsiregs *regs = hdata->regs;
/* stop DMA */
- DMA(instance)->SP_DMA = 1;
+ regs->SP_DMA = 1;
/* remove write bit from CONTROL bits */
- DMA(instance)->CNTR = GVP11_DMAC_INT_ENABLE;
+ regs->CNTR = GVP11_DMAC_INT_ENABLE;
/* copy from a bounce buffer, if necessary */
- if (status && hdata->dma_bounce_buffer) {
- if (hdata->dma_dir && SCpnt)
- memcpy(SCpnt->SCp.ptr, hdata->dma_bounce_buffer,
+ if (status && wh->dma_bounce_buffer) {
+ if (wh->dma_dir && SCpnt)
+ memcpy(SCpnt->SCp.ptr, wh->dma_bounce_buffer,
SCpnt->SCp.this_residual);
- if (hdata->dma_buffer_pool == BUF_SCSI_ALLOCED)
- kfree(hdata->dma_bounce_buffer);
+ if (wh->dma_buffer_pool == BUF_SCSI_ALLOCED)
+ kfree(wh->dma_bounce_buffer);
else
- amiga_chip_free(hdata->dma_bounce_buffer);
+ amiga_chip_free(wh->dma_bounce_buffer);
- hdata->dma_bounce_buffer = NULL;
- hdata->dma_bounce_len = 0;
+ wh->dma_bounce_buffer = NULL;
+ wh->dma_bounce_len = 0;
}
}
-#define CHECK_WD33C93
-
-int __init gvp11_detect(struct scsi_host_template *tpnt)
-{
- static unsigned char called = 0;
- struct Scsi_Host *instance;
- unsigned long address;
- unsigned int epc;
- struct zorro_dev *z = NULL;
- unsigned int default_dma_xfer_mask;
- struct WD33C93_hostdata *hdata;
- wd33c93_regs regs;
- int num_gvp11 = 0;
-#ifdef CHECK_WD33C93
- volatile unsigned char *sasr_3393, *scmd_3393;
- unsigned char save_sasr;
- unsigned char q, qq;
-#endif
-
- if (!MACH_IS_AMIGA || called)
- return 0;
- called = 1;
-
- tpnt->proc_name = "GVP11";
- tpnt->proc_info = &wd33c93_proc_info;
-
- while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
- /*
- * This should (hopefully) be the correct way to identify
- * all the different GVP SCSI controllers (except for the
- * SERIES I though).
- */
-
- if (z->id == ZORRO_PROD_GVP_COMBO_030_R3_SCSI ||
- z->id == ZORRO_PROD_GVP_SERIES_II)
- default_dma_xfer_mask = ~0x00ffffff;
- else if (z->id == ZORRO_PROD_GVP_GFORCE_030_SCSI ||
- z->id == ZORRO_PROD_GVP_A530_SCSI ||
- z->id == ZORRO_PROD_GVP_COMBO_030_R4_SCSI)
- default_dma_xfer_mask = ~0x01ffffff;
- else if (z->id == ZORRO_PROD_GVP_A1291 ||
- z->id == ZORRO_PROD_GVP_GFORCE_040_SCSI_1)
- default_dma_xfer_mask = ~0x07ffffff;
- else
- continue;
-
- /*
- * Rumors state that some GVP ram boards use the same product
- * code as the SCSI controllers. Therefore if the board-size
- * is not 64KB we asume it is a ram board and bail out.
- */
- if (z->resource.end - z->resource.start != 0xffff)
- continue;
-
- address = z->resource.start;
- if (!request_mem_region(address, 256, "wd33c93"))
- continue;
-
-#ifdef CHECK_WD33C93
-
- /*
- * These darn GVP boards are a problem - it can be tough to tell
- * whether or not they include a SCSI controller. This is the
- * ultimate Yet-Another-GVP-Detection-Hack in that it actually
- * probes for a WD33c93 chip: If we find one, it's extremely
- * likely that this card supports SCSI, regardless of Product_
- * Code, Board_Size, etc.
- */
-
- /* Get pointers to the presumed register locations and save contents */
-
- sasr_3393 = &(((gvp11_scsiregs *)(ZTWO_VADDR(address)))->SASR);
- scmd_3393 = &(((gvp11_scsiregs *)(ZTWO_VADDR(address)))->SCMD);
- save_sasr = *sasr_3393;
-
- /* First test the AuxStatus Reg */
-
- q = *sasr_3393; /* read it */
- if (q & 0x08) /* bit 3 should always be clear */
- goto release;
- *sasr_3393 = WD_AUXILIARY_STATUS; /* setup indirect address */
- if (*sasr_3393 == WD_AUXILIARY_STATUS) { /* shouldn't retain the write */
- *sasr_3393 = save_sasr; /* Oops - restore this byte */
- goto release;
- }
- if (*sasr_3393 != q) { /* should still read the same */
- *sasr_3393 = save_sasr; /* Oops - restore this byte */
- goto release;
- }
- if (*scmd_3393 != q) /* and so should the image at 0x1f */
- goto release;
-
- /*
- * Ok, we probably have a wd33c93, but let's check a few other places
- * for good measure. Make sure that this works for both 'A and 'B
- * chip versions.
- */
-
- *sasr_3393 = WD_SCSI_STATUS;
- q = *scmd_3393;
- *sasr_3393 = WD_SCSI_STATUS;
- *scmd_3393 = ~q;
- *sasr_3393 = WD_SCSI_STATUS;
- qq = *scmd_3393;
- *sasr_3393 = WD_SCSI_STATUS;
- *scmd_3393 = q;
- if (qq != q) /* should be read only */
- goto release;
- *sasr_3393 = 0x1e; /* this register is unimplemented */
- q = *scmd_3393;
- *sasr_3393 = 0x1e;
- *scmd_3393 = ~q;
- *sasr_3393 = 0x1e;
- qq = *scmd_3393;
- *sasr_3393 = 0x1e;
- *scmd_3393 = q;
- if (qq != q || qq != 0xff) /* should be read only, all 1's */
- goto release;
- *sasr_3393 = WD_TIMEOUT_PERIOD;
- q = *scmd_3393;
- *sasr_3393 = WD_TIMEOUT_PERIOD;
- *scmd_3393 = ~q;
- *sasr_3393 = WD_TIMEOUT_PERIOD;
- qq = *scmd_3393;
- *sasr_3393 = WD_TIMEOUT_PERIOD;
- *scmd_3393 = q;
- if (qq != (~q & 0xff)) /* should be read/write */
- goto release;
-#endif
-
- instance = scsi_register(tpnt, sizeof(struct WD33C93_hostdata));
- if (instance == NULL)
- goto release;
- instance->base = ZTWO_VADDR(address);
- instance->irq = IRQ_AMIGA_PORTS;
- instance->unique_id = z->slotaddr;
-
- hdata = shost_priv(instance);
- if (gvp11_xfer_mask)
- hdata->dma_xfer_mask = gvp11_xfer_mask;
- else
- hdata->dma_xfer_mask = default_dma_xfer_mask;
-
- DMA(instance)->secret2 = 1;
- DMA(instance)->secret1 = 0;
- DMA(instance)->secret3 = 15;
- while (DMA(instance)->CNTR & GVP11_DMAC_BUSY)
- ;
- DMA(instance)->CNTR = 0;
-
- DMA(instance)->BANK = 0;
-
- epc = *(unsigned short *)(ZTWO_VADDR(address) + 0x8000);
-
- /*
- * Check for 14MHz SCSI clock
- */
- regs.SASR = &(DMA(instance)->SASR);
- regs.SCMD = &(DMA(instance)->SCMD);
- hdata->no_sync = 0xff;
- hdata->fast = 0;
- hdata->dma_mode = CTRL_DMA;
- wd33c93_init(instance, regs, dma_setup, dma_stop,
- (epc & GVP_SCSICLKMASK) ? WD33C93_FS_8_10
- : WD33C93_FS_12_15);
-
- if (request_irq(IRQ_AMIGA_PORTS, gvp11_intr, IRQF_SHARED,
- "GVP11 SCSI", instance))
- goto unregister;
- DMA(instance)->CNTR = GVP11_DMAC_INT_ENABLE;
- num_gvp11++;
- continue;
-
-unregister:
- scsi_unregister(instance);
-release:
- release_mem_region(address, 256);
- }
-
- return num_gvp11;
-}
-
static int gvp11_bus_reset(struct scsi_cmnd *cmd)
{
+ struct Scsi_Host *instance = cmd->device->host;
+
/* FIXME perform bus-specific reset */
/* FIXME 2: shouldn't we no-op this function (return
FAILED), and fall back to host reset function,
wd33c93_host_reset ? */
- spin_lock_irq(cmd->device->host->host_lock);
+ spin_lock_irq(instance->host_lock);
wd33c93_host_reset(cmd);
- spin_unlock_irq(cmd->device->host->host_lock);
+ spin_unlock_irq(instance->host_lock);
return SUCCESS;
}
-
-#define HOSTS_C
-
-#include "gvp11.h"
-
-static struct scsi_host_template driver_template = {
- .proc_name = "GVP11",
+static struct scsi_host_template gvp11_scsi_template = {
+ .module = THIS_MODULE,
.name = "GVP Series II SCSI",
- .detect = gvp11_detect,
- .release = gvp11_release,
+ .proc_info = wd33c93_proc_info,
+ .proc_name = "GVP11",
.queuecommand = wd33c93_queuecommand,
.eh_abort_handler = wd33c93_abort,
.eh_bus_reset_handler = gvp11_bus_reset,
@@ -385,17 +203,230 @@
.use_clustering = DISABLE_CLUSTERING
};
-
-#include "scsi_module.c"
-
-int gvp11_release(struct Scsi_Host *instance)
+static int __devinit check_wd33c93(struct gvp11_scsiregs *regs)
{
-#ifdef MODULE
- DMA(instance)->CNTR = 0;
- release_mem_region(ZTWO_PADDR(instance->base), 256);
- free_irq(IRQ_AMIGA_PORTS, instance);
-#endif
- return 1;
+#ifdef CHECK_WD33C93
+ volatile unsigned char *sasr_3393, *scmd_3393;
+ unsigned char save_sasr;
+ unsigned char q, qq;
+
+ /*
+ * These darn GVP boards are a problem - it can be tough to tell
+ * whether or not they include a SCSI controller. This is the
+ * ultimate Yet-Another-GVP-Detection-Hack in that it actually
+ * probes for a WD33c93 chip: If we find one, it's extremely
+ * likely that this card supports SCSI, regardless of Product_
+ * Code, Board_Size, etc.
+ */
+
+ /* Get pointers to the presumed register locations and save contents */
+
+ sasr_3393 = ®s->SASR;
+ scmd_3393 = ®s->SCMD;
+ save_sasr = *sasr_3393;
+
+ /* First test the AuxStatus Reg */
+
+ q = *sasr_3393; /* read it */
+ if (q & 0x08) /* bit 3 should always be clear */
+ return -ENODEV;
+ *sasr_3393 = WD_AUXILIARY_STATUS; /* setup indirect address */
+ if (*sasr_3393 == WD_AUXILIARY_STATUS) { /* shouldn't retain the write */
+ *sasr_3393 = save_sasr; /* Oops - restore this byte */
+ return -ENODEV;
+ }
+ if (*sasr_3393 != q) { /* should still read the same */
+ *sasr_3393 = save_sasr; /* Oops - restore this byte */
+ return -ENODEV;
+ }
+ if (*scmd_3393 != q) /* and so should the image at 0x1f */
+ return -ENODEV;
+
+ /*
+ * Ok, we probably have a wd33c93, but let's check a few other places
+ * for good measure. Make sure that this works for both 'A and 'B
+ * chip versions.
+ */
+
+ *sasr_3393 = WD_SCSI_STATUS;
+ q = *scmd_3393;
+ *sasr_3393 = WD_SCSI_STATUS;
+ *scmd_3393 = ~q;
+ *sasr_3393 = WD_SCSI_STATUS;
+ qq = *scmd_3393;
+ *sasr_3393 = WD_SCSI_STATUS;
+ *scmd_3393 = q;
+ if (qq != q) /* should be read only */
+ return -ENODEV;
+ *sasr_3393 = 0x1e; /* this register is unimplemented */
+ q = *scmd_3393;
+ *sasr_3393 = 0x1e;
+ *scmd_3393 = ~q;
+ *sasr_3393 = 0x1e;
+ qq = *scmd_3393;
+ *sasr_3393 = 0x1e;
+ *scmd_3393 = q;
+ if (qq != q || qq != 0xff) /* should be read only, all 1's */
+ return -ENODEV;
+ *sasr_3393 = WD_TIMEOUT_PERIOD;
+ q = *scmd_3393;
+ *sasr_3393 = WD_TIMEOUT_PERIOD;
+ *scmd_3393 = ~q;
+ *sasr_3393 = WD_TIMEOUT_PERIOD;
+ qq = *scmd_3393;
+ *sasr_3393 = WD_TIMEOUT_PERIOD;
+ *scmd_3393 = q;
+ if (qq != (~q & 0xff)) /* should be read/write */
+ return -ENODEV;
+#endif /* CHECK_WD33C93 */
+
+ return 0;
}
+static int __devinit gvp11_probe(struct zorro_dev *z,
+ const struct zorro_device_id *ent)
+{
+ struct Scsi_Host *instance;
+ unsigned long address;
+ int error;
+ unsigned int epc;
+ unsigned int default_dma_xfer_mask;
+ struct gvp11_hostdata *hdata;
+ struct gvp11_scsiregs *regs;
+ wd33c93_regs wdregs;
+
+ default_dma_xfer_mask = ent->driver_data;
+
+ /*
+ * Rumors state that some GVP ram boards use the same product
+ * code as the SCSI controllers. Therefore if the board-size
+ * is not 64KB we asume it is a ram board and bail out.
+ */
+ if (zorro_resource_len(z) != 0x10000)
+ return -ENODEV;
+
+ address = z->resource.start;
+ if (!request_mem_region(address, 256, "wd33c93"))
+ return -EBUSY;
+
+ regs = (struct gvp11_scsiregs *)(ZTWO_VADDR(address));
+
+ error = check_wd33c93(regs);
+ if (error)
+ goto fail_check_or_alloc;
+
+ instance = scsi_host_alloc(&gvp11_scsi_template,
+ sizeof(struct gvp11_hostdata));
+ if (!instance) {
+ error = -ENOMEM;
+ goto fail_check_or_alloc;
+ }
+
+ instance->irq = IRQ_AMIGA_PORTS;
+ instance->unique_id = z->slotaddr;
+
+ regs->secret2 = 1;
+ regs->secret1 = 0;
+ regs->secret3 = 15;
+ while (regs->CNTR & GVP11_DMAC_BUSY)
+ ;
+ regs->CNTR = 0;
+ regs->BANK = 0;
+
+ wdregs.SASR = ®s->SASR;
+ wdregs.SCMD = ®s->SCMD;
+
+ hdata = shost_priv(instance);
+ if (gvp11_xfer_mask)
+ hdata->wh.dma_xfer_mask = gvp11_xfer_mask;
+ else
+ hdata->wh.dma_xfer_mask = default_dma_xfer_mask;
+
+ hdata->wh.no_sync = 0xff;
+ hdata->wh.fast = 0;
+ hdata->wh.dma_mode = CTRL_DMA;
+ hdata->regs = regs;
+
+ /*
+ * Check for 14MHz SCSI clock
+ */
+ epc = *(unsigned short *)(ZTWO_VADDR(address) + 0x8000);
+ wd33c93_init(instance, wdregs, dma_setup, dma_stop,
+ (epc & GVP_SCSICLKMASK) ? WD33C93_FS_8_10
+ : WD33C93_FS_12_15);
+
+ error = request_irq(IRQ_AMIGA_PORTS, gvp11_intr, IRQF_SHARED,
+ "GVP11 SCSI", instance);
+ if (error)
+ goto fail_irq;
+
+ regs->CNTR = GVP11_DMAC_INT_ENABLE;
+
+ error = scsi_add_host(instance, NULL);
+ if (error)
+ goto fail_host;
+
+ zorro_set_drvdata(z, instance);
+ scsi_scan_host(instance);
+ return 0;
+
+fail_host:
+ free_irq(IRQ_AMIGA_PORTS, instance);
+fail_irq:
+ scsi_host_put(instance);
+fail_check_or_alloc:
+ release_mem_region(address, 256);
+ return error;
+}
+
+static void __devexit gvp11_remove(struct zorro_dev *z)
+{
+ struct Scsi_Host *instance = zorro_get_drvdata(z);
+ struct gvp11_hostdata *hdata = shost_priv(instance);
+
+ hdata->regs->CNTR = 0;
+ scsi_remove_host(instance);
+ free_irq(IRQ_AMIGA_PORTS, instance);
+ scsi_host_put(instance);
+ release_mem_region(z->resource.start, 256);
+}
+
+ /*
+ * This should (hopefully) be the correct way to identify
+ * all the different GVP SCSI controllers (except for the
+ * SERIES I though).
+ */
+
+static struct zorro_device_id gvp11_zorro_tbl[] __devinitdata = {
+ { ZORRO_PROD_GVP_COMBO_030_R3_SCSI, ~0x00ffffff },
+ { ZORRO_PROD_GVP_SERIES_II, ~0x00ffffff },
+ { ZORRO_PROD_GVP_GFORCE_030_SCSI, ~0x01ffffff },
+ { ZORRO_PROD_GVP_A530_SCSI, ~0x01ffffff },
+ { ZORRO_PROD_GVP_COMBO_030_R4_SCSI, ~0x01ffffff },
+ { ZORRO_PROD_GVP_A1291, ~0x07ffffff },
+ { ZORRO_PROD_GVP_GFORCE_040_SCSI_1, ~0x07ffffff },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(zorro, gvp11_zorro_tbl);
+
+static struct zorro_driver gvp11_driver = {
+ .name = "gvp11",
+ .id_table = gvp11_zorro_tbl,
+ .probe = gvp11_probe,
+ .remove = __devexit_p(gvp11_remove),
+};
+
+static int __init gvp11_init(void)
+{
+ return zorro_register_driver(&gvp11_driver);
+}
+module_init(gvp11_init);
+
+static void __exit gvp11_exit(void)
+{
+ zorro_unregister_driver(&gvp11_driver);
+}
+module_exit(gvp11_exit);
+
+MODULE_DESCRIPTION("GVP Series II SCSI");
MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/gvp11.h b/drivers/scsi/gvp11.h
index e2efdf9..852913c 100644
--- a/drivers/scsi/gvp11.h
+++ b/drivers/scsi/gvp11.h
@@ -11,9 +11,6 @@
#include <linux/types.h>
-int gvp11_detect(struct scsi_host_template *);
-int gvp11_release(struct Scsi_Host *);
-
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
#endif
@@ -22,15 +19,13 @@
#define CAN_QUEUE 16
#endif
-#ifndef HOSTS_C
-
/*
* if the transfer address ANDed with this results in a non-zero
* result, then we can't use DMA.
*/
#define GVP11_XFER_MASK (0xff000001)
-typedef struct {
+struct gvp11_scsiregs {
unsigned char pad1[64];
volatile unsigned short CNTR;
unsigned char pad2[31];
@@ -46,7 +41,7 @@
volatile unsigned short SP_DMA;
volatile unsigned short secret2; /* store 1 here */
volatile unsigned short secret3; /* store 15 here */
-} gvp11_scsiregs;
+};
/* bits in CNTR */
#define GVP11_DMAC_BUSY (1<<0)
@@ -54,6 +49,4 @@
#define GVP11_DMAC_INT_ENABLE (1<<3)
#define GVP11_DMAC_DIR_WRITE (1<<4)
-#endif /* else def HOSTS_C */
-
#endif /* GVP11_H */
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 6a6661c..82ea4a8 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -567,7 +567,8 @@
static void ipr_reinit_ipr_cmnd(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
- struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
+ struct ipr_ioasa *ioasa = &ipr_cmd->s.ioasa;
+ struct ipr_ioasa64 *ioasa64 = &ipr_cmd->s.ioasa64;
dma_addr_t dma_addr = ipr_cmd->dma_addr;
memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt));
@@ -576,19 +577,19 @@
ioarcb->ioadl_len = 0;
ioarcb->read_ioadl_len = 0;
- if (ipr_cmd->ioa_cfg->sis64)
+ if (ipr_cmd->ioa_cfg->sis64) {
ioarcb->u.sis64_addr_data.data_ioadl_addr =
cpu_to_be64(dma_addr + offsetof(struct ipr_cmnd, i.ioadl64));
- else {
+ ioasa64->u.gata.status = 0;
+ } else {
ioarcb->write_ioadl_addr =
cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, i.ioadl));
ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
+ ioasa->u.gata.status = 0;
}
- ioasa->ioasc = 0;
- ioasa->residual_data_len = 0;
- ioasa->u.gata.status = 0;
-
+ ioasa->hdr.ioasc = 0;
+ ioasa->hdr.residual_data_len = 0;
ipr_cmd->scsi_cmd = NULL;
ipr_cmd->qc = NULL;
ipr_cmd->sense_buffer[0] = 0;
@@ -768,8 +769,8 @@
list_for_each_entry_safe(ipr_cmd, temp, &ioa_cfg->pending_q, queue) {
list_del(&ipr_cmd->queue);
- ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_IOA_WAS_RESET);
- ipr_cmd->ioasa.ilid = cpu_to_be32(IPR_DRIVER_ILID);
+ ipr_cmd->s.ioasa.hdr.ioasc = cpu_to_be32(IPR_IOASC_IOA_WAS_RESET);
+ ipr_cmd->s.ioasa.hdr.ilid = cpu_to_be32(IPR_DRIVER_ILID);
if (ipr_cmd->scsi_cmd)
ipr_cmd->done = ipr_scsi_eh_done;
@@ -1040,7 +1041,7 @@
proto = cfgtew->u.cfgte64->proto;
res->res_flags = cfgtew->u.cfgte64->res_flags;
res->qmodel = IPR_QUEUEING_MODEL64(res);
- res->type = cfgtew->u.cfgte64->res_type & 0x0f;
+ res->type = cfgtew->u.cfgte64->res_type;
memcpy(res->res_path, &cfgtew->u.cfgte64->res_path,
sizeof(res->res_path));
@@ -1319,7 +1320,7 @@
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct ipr_hostrcb *hostrcb = ipr_cmd->u.hostrcb;
- u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
+ u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
list_del(&hostrcb->queue);
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
@@ -2354,7 +2355,7 @@
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct ipr_hostrcb *hostrcb = ipr_cmd->u.hostrcb;
- u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
+ u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
u32 fd_ioasc;
if (ioa_cfg->sis64)
@@ -4509,11 +4510,16 @@
}
ipr_send_blocking_cmd(ipr_cmd, ipr_timeout, IPR_DEVICE_RESET_TIMEOUT);
- ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
+ ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
- if (ipr_is_gata(res) && res->sata_port && ioasc != IPR_IOASC_IOA_WAS_RESET)
- memcpy(&res->sata_port->ioasa, &ipr_cmd->ioasa.u.gata,
- sizeof(struct ipr_ioasa_gata));
+ if (ipr_is_gata(res) && res->sata_port && ioasc != IPR_IOASC_IOA_WAS_RESET) {
+ if (ipr_cmd->ioa_cfg->sis64)
+ memcpy(&res->sata_port->ioasa, &ipr_cmd->s.ioasa64.u.gata,
+ sizeof(struct ipr_ioasa_gata));
+ else
+ memcpy(&res->sata_port->ioasa, &ipr_cmd->s.ioasa.u.gata,
+ sizeof(struct ipr_ioasa_gata));
+ }
LEAVE;
return (IPR_IOASC_SENSE_KEY(ioasc) ? -EIO : 0);
@@ -4768,7 +4774,7 @@
scmd_printk(KERN_ERR, scsi_cmd, "Aborting command: %02X\n",
scsi_cmd->cmnd[0]);
ipr_send_blocking_cmd(ipr_cmd, ipr_abort_timeout, IPR_CANCEL_ALL_TIMEOUT);
- ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
+ ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
/*
* If the abort task timed out and we sent a bus reset, we will get
@@ -4812,15 +4818,39 @@
/**
* ipr_handle_other_interrupt - Handle "other" interrupts
* @ioa_cfg: ioa config struct
- * @int_reg: interrupt register
*
* Return value:
* IRQ_NONE / IRQ_HANDLED
**/
-static irqreturn_t ipr_handle_other_interrupt(struct ipr_ioa_cfg *ioa_cfg,
- volatile u32 int_reg)
+static irqreturn_t ipr_handle_other_interrupt(struct ipr_ioa_cfg *ioa_cfg)
{
irqreturn_t rc = IRQ_HANDLED;
+ volatile u32 int_reg, int_mask_reg;
+
+ int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg32);
+ int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32) & ~int_mask_reg;
+
+ /* If an interrupt on the adapter did not occur, ignore it.
+ * Or in the case of SIS 64, check for a stage change interrupt.
+ */
+ if ((int_reg & IPR_PCII_OPER_INTERRUPTS) == 0) {
+ if (ioa_cfg->sis64) {
+ int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
+ int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
+ if (int_reg & IPR_PCII_IPL_STAGE_CHANGE) {
+
+ /* clear stage change */
+ writel(IPR_PCII_IPL_STAGE_CHANGE, ioa_cfg->regs.clr_interrupt_reg);
+ int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
+ list_del(&ioa_cfg->reset_cmd->queue);
+ del_timer(&ioa_cfg->reset_cmd->timer);
+ ipr_reset_ioa_job(ioa_cfg->reset_cmd);
+ return IRQ_HANDLED;
+ }
+ }
+
+ return IRQ_NONE;
+ }
if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) {
/* Mask the interrupt */
@@ -4881,7 +4911,7 @@
{
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)devp;
unsigned long lock_flags = 0;
- volatile u32 int_reg, int_mask_reg;
+ volatile u32 int_reg;
u32 ioasc;
u16 cmd_index;
int num_hrrq = 0;
@@ -4896,33 +4926,6 @@
return IRQ_NONE;
}
- int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg32);
- int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32) & ~int_mask_reg;
-
- /* If an interrupt on the adapter did not occur, ignore it.
- * Or in the case of SIS 64, check for a stage change interrupt.
- */
- if (unlikely((int_reg & IPR_PCII_OPER_INTERRUPTS) == 0)) {
- if (ioa_cfg->sis64) {
- int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
- int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
- if (int_reg & IPR_PCII_IPL_STAGE_CHANGE) {
-
- /* clear stage change */
- writel(IPR_PCII_IPL_STAGE_CHANGE, ioa_cfg->regs.clr_interrupt_reg);
- int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
- list_del(&ioa_cfg->reset_cmd->queue);
- del_timer(&ioa_cfg->reset_cmd->timer);
- ipr_reset_ioa_job(ioa_cfg->reset_cmd);
- spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
- return IRQ_HANDLED;
- }
- }
-
- spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
- return IRQ_NONE;
- }
-
while (1) {
ipr_cmd = NULL;
@@ -4940,7 +4943,7 @@
ipr_cmd = ioa_cfg->ipr_cmnd_list[cmd_index];
- ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
+ ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
ipr_trc_hook(ipr_cmd, IPR_TRACE_FINISH, ioasc);
@@ -4962,7 +4965,7 @@
/* Clear the PCI interrupt */
do {
writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg32);
- int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32) & ~int_mask_reg;
+ int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32);
} while (int_reg & IPR_PCII_HRRQ_UPDATED &&
num_hrrq++ < IPR_MAX_HRRQ_RETRIES);
@@ -4977,7 +4980,7 @@
}
if (unlikely(rc == IRQ_NONE))
- rc = ipr_handle_other_interrupt(ioa_cfg, int_reg);
+ rc = ipr_handle_other_interrupt(ioa_cfg);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return rc;
@@ -5014,6 +5017,10 @@
ipr_cmd->dma_use_sg = nseg;
+ ioarcb->data_transfer_length = cpu_to_be32(length);
+ ioarcb->ioadl_len =
+ cpu_to_be32(sizeof(struct ipr_ioadl64_desc) * ipr_cmd->dma_use_sg);
+
if (scsi_cmd->sc_data_direction == DMA_TO_DEVICE) {
ioadl_flags = IPR_IOADL_FLAGS_WRITE;
ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
@@ -5135,7 +5142,7 @@
struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
struct ipr_resource_entry *res = scsi_cmd->device->hostdata;
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
- u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
+ u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
if (IPR_IOASC_SENSE_KEY(ioasc) > 0) {
scsi_cmd->result |= (DID_ERROR << 16);
@@ -5166,7 +5173,7 @@
static void ipr_reinit_ipr_cmnd_for_erp(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
- struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
+ struct ipr_ioasa *ioasa = &ipr_cmd->s.ioasa;
dma_addr_t dma_addr = ipr_cmd->dma_addr;
memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt));
@@ -5174,8 +5181,8 @@
ioarcb->read_data_transfer_length = 0;
ioarcb->ioadl_len = 0;
ioarcb->read_ioadl_len = 0;
- ioasa->ioasc = 0;
- ioasa->residual_data_len = 0;
+ ioasa->hdr.ioasc = 0;
+ ioasa->hdr.residual_data_len = 0;
if (ipr_cmd->ioa_cfg->sis64)
ioarcb->u.sis64_addr_data.data_ioadl_addr =
@@ -5200,7 +5207,7 @@
static void ipr_erp_request_sense(struct ipr_cmnd *ipr_cmd)
{
struct ipr_cmd_pkt *cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt;
- u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
+ u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
if (IPR_IOASC_SENSE_KEY(ioasc) > 0) {
ipr_erp_done(ipr_cmd);
@@ -5277,12 +5284,12 @@
int i;
u16 data_len;
u32 ioasc, fd_ioasc;
- struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
+ struct ipr_ioasa *ioasa = &ipr_cmd->s.ioasa;
__be32 *ioasa_data = (__be32 *)ioasa;
int error_index;
- ioasc = be32_to_cpu(ioasa->ioasc) & IPR_IOASC_IOASC_MASK;
- fd_ioasc = be32_to_cpu(ioasa->fd_ioasc) & IPR_IOASC_IOASC_MASK;
+ ioasc = be32_to_cpu(ioasa->hdr.ioasc) & IPR_IOASC_IOASC_MASK;
+ fd_ioasc = be32_to_cpu(ioasa->hdr.fd_ioasc) & IPR_IOASC_IOASC_MASK;
if (0 == ioasc)
return;
@@ -5297,7 +5304,7 @@
if (ioa_cfg->log_level < IPR_MAX_LOG_LEVEL) {
/* Don't log an error if the IOA already logged one */
- if (ioasa->ilid != 0)
+ if (ioasa->hdr.ilid != 0)
return;
if (!ipr_is_gscsi(res))
@@ -5309,10 +5316,11 @@
ipr_res_err(ioa_cfg, res, "%s\n", ipr_error_table[error_index].error);
- if (sizeof(struct ipr_ioasa) < be16_to_cpu(ioasa->ret_stat_len))
+ data_len = be16_to_cpu(ioasa->hdr.ret_stat_len);
+ if (ioa_cfg->sis64 && sizeof(struct ipr_ioasa64) < data_len)
+ data_len = sizeof(struct ipr_ioasa64);
+ else if (!ioa_cfg->sis64 && sizeof(struct ipr_ioasa) < data_len)
data_len = sizeof(struct ipr_ioasa);
- else
- data_len = be16_to_cpu(ioasa->ret_stat_len);
ipr_err("IOASA Dump:\n");
@@ -5338,8 +5346,8 @@
u32 failing_lba;
u8 *sense_buf = ipr_cmd->scsi_cmd->sense_buffer;
struct ipr_resource_entry *res = ipr_cmd->scsi_cmd->device->hostdata;
- struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
- u32 ioasc = be32_to_cpu(ioasa->ioasc);
+ struct ipr_ioasa *ioasa = &ipr_cmd->s.ioasa;
+ u32 ioasc = be32_to_cpu(ioasa->hdr.ioasc);
memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE);
@@ -5382,7 +5390,7 @@
/* Illegal request */
if ((IPR_IOASC_SENSE_KEY(ioasc) == 0x05) &&
- (be32_to_cpu(ioasa->ioasc_specific) & IPR_FIELD_POINTER_VALID)) {
+ (be32_to_cpu(ioasa->hdr.ioasc_specific) & IPR_FIELD_POINTER_VALID)) {
sense_buf[7] = 10; /* additional length */
/* IOARCB was in error */
@@ -5393,10 +5401,10 @@
sense_buf[16] =
((IPR_FIELD_POINTER_MASK &
- be32_to_cpu(ioasa->ioasc_specific)) >> 8) & 0xff;
+ be32_to_cpu(ioasa->hdr.ioasc_specific)) >> 8) & 0xff;
sense_buf[17] =
(IPR_FIELD_POINTER_MASK &
- be32_to_cpu(ioasa->ioasc_specific)) & 0xff;
+ be32_to_cpu(ioasa->hdr.ioasc_specific)) & 0xff;
} else {
if (ioasc == IPR_IOASC_MED_DO_NOT_REALLOC) {
if (ipr_is_vset_device(res))
@@ -5428,14 +5436,20 @@
**/
static int ipr_get_autosense(struct ipr_cmnd *ipr_cmd)
{
- struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
+ struct ipr_ioasa *ioasa = &ipr_cmd->s.ioasa;
+ struct ipr_ioasa64 *ioasa64 = &ipr_cmd->s.ioasa64;
- if ((be32_to_cpu(ioasa->ioasc_specific) & IPR_AUTOSENSE_VALID) == 0)
+ if ((be32_to_cpu(ioasa->hdr.ioasc_specific) & IPR_AUTOSENSE_VALID) == 0)
return 0;
- memcpy(ipr_cmd->scsi_cmd->sense_buffer, ioasa->auto_sense.data,
- min_t(u16, be16_to_cpu(ioasa->auto_sense.auto_sense_len),
- SCSI_SENSE_BUFFERSIZE));
+ if (ipr_cmd->ioa_cfg->sis64)
+ memcpy(ipr_cmd->scsi_cmd->sense_buffer, ioasa64->auto_sense.data,
+ min_t(u16, be16_to_cpu(ioasa64->auto_sense.auto_sense_len),
+ SCSI_SENSE_BUFFERSIZE));
+ else
+ memcpy(ipr_cmd->scsi_cmd->sense_buffer, ioasa->auto_sense.data,
+ min_t(u16, be16_to_cpu(ioasa->auto_sense.auto_sense_len),
+ SCSI_SENSE_BUFFERSIZE));
return 1;
}
@@ -5455,7 +5469,7 @@
{
struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
struct ipr_resource_entry *res = scsi_cmd->device->hostdata;
- u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
+ u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
u32 masked_ioasc = ioasc & IPR_IOASC_IOASC_MASK;
if (!res) {
@@ -5547,9 +5561,9 @@
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
- u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
+ u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
- scsi_set_resid(scsi_cmd, be32_to_cpu(ipr_cmd->ioasa.residual_data_len));
+ scsi_set_resid(scsi_cmd, be32_to_cpu(ipr_cmd->s.ioasa.hdr.residual_data_len));
if (likely(IPR_IOASC_SENSE_KEY(ioasc) == 0)) {
scsi_dma_unmap(ipr_cmd->scsi_cmd);
@@ -5839,19 +5853,23 @@
struct ata_queued_cmd *qc = ipr_cmd->qc;
struct ipr_sata_port *sata_port = qc->ap->private_data;
struct ipr_resource_entry *res = sata_port->res;
- u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
+ u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
- memcpy(&sata_port->ioasa, &ipr_cmd->ioasa.u.gata,
- sizeof(struct ipr_ioasa_gata));
+ if (ipr_cmd->ioa_cfg->sis64)
+ memcpy(&sata_port->ioasa, &ipr_cmd->s.ioasa64.u.gata,
+ sizeof(struct ipr_ioasa_gata));
+ else
+ memcpy(&sata_port->ioasa, &ipr_cmd->s.ioasa.u.gata,
+ sizeof(struct ipr_ioasa_gata));
ipr_dump_ioasa(ioa_cfg, ipr_cmd, res);
- if (be32_to_cpu(ipr_cmd->ioasa.ioasc_specific) & IPR_ATA_DEVICE_WAS_RESET)
+ if (be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc_specific) & IPR_ATA_DEVICE_WAS_RESET)
scsi_report_device_reset(ioa_cfg->host, res->bus, res->target);
if (IPR_IOASC_SENSE_KEY(ioasc) > RECOVERED_ERROR)
- qc->err_mask |= __ac_err_mask(ipr_cmd->ioasa.u.gata.status);
+ qc->err_mask |= __ac_err_mask(sata_port->ioasa.status);
else
- qc->err_mask |= ac_err_mask(ipr_cmd->ioasa.u.gata.status);
+ qc->err_mask |= ac_err_mask(sata_port->ioasa.status);
list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
ata_qc_complete(qc);
}
@@ -6520,7 +6538,7 @@
static int ipr_reset_cmd_failed(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
- u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
+ u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
dev_err(&ioa_cfg->pdev->dev,
"0x%02X failed with IOASC: 0x%08X\n",
@@ -6544,7 +6562,7 @@
static int ipr_reset_mode_sense_failed(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
- u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
+ u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
if (ioasc == IPR_IOASC_IR_INVALID_REQ_TYPE_OR_PKT) {
ipr_cmd->job_step = ipr_set_supported_devs;
@@ -6634,7 +6652,7 @@
**/
static int ipr_reset_mode_sense_page24_failed(struct ipr_cmnd *ipr_cmd)
{
- u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
+ u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
if (ioasc == IPR_IOASC_IR_INVALID_REQ_TYPE_OR_PKT) {
ipr_cmd->job_step = ipr_ioafp_mode_sense_page28;
@@ -6706,7 +6724,7 @@
list_move_tail(&res->queue, &old_res);
if (ioa_cfg->sis64)
- entries = ioa_cfg->u.cfg_table64->hdr64.num_entries;
+ entries = be16_to_cpu(ioa_cfg->u.cfg_table64->hdr64.num_entries);
else
entries = ioa_cfg->u.cfg_table->hdr.num_entries;
@@ -6792,6 +6810,7 @@
ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
ioarcb->cmd_pkt.cdb[0] = IPR_QUERY_IOA_CONFIG;
+ ioarcb->cmd_pkt.cdb[6] = (ioa_cfg->cfg_table_size >> 16) & 0xff;
ioarcb->cmd_pkt.cdb[7] = (ioa_cfg->cfg_table_size >> 8) & 0xff;
ioarcb->cmd_pkt.cdb[8] = ioa_cfg->cfg_table_size & 0xff;
@@ -7122,7 +7141,9 @@
ipr_dbg("IPL stage = 0x%lx, IPL stage time = %ld\n", stage, stage_time);
/* sanity check the stage_time value */
- if (stage_time < IPR_IPL_INIT_MIN_STAGE_TIME)
+ if (stage_time == 0)
+ stage_time = IPR_IPL_INIT_DEFAULT_STAGE_TIME;
+ else if (stage_time < IPR_IPL_INIT_MIN_STAGE_TIME)
stage_time = IPR_IPL_INIT_MIN_STAGE_TIME;
else if (stage_time > IPR_LONG_OPERATIONAL_TIMEOUT)
stage_time = IPR_LONG_OPERATIONAL_TIMEOUT;
@@ -7165,13 +7186,14 @@
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
volatile u32 int_reg;
+ volatile u64 maskval;
ENTER;
ipr_cmd->job_step = ipr_ioafp_identify_hrrq;
ipr_init_ioa_mem(ioa_cfg);
ioa_cfg->allow_interrupts = 1;
- int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
+ int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32);
if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) {
writel((IPR_PCII_ERROR_INTERRUPTS | IPR_PCII_HRRQ_UPDATED),
@@ -7183,9 +7205,12 @@
/* Enable destructive diagnostics on IOA */
writel(ioa_cfg->doorbell, ioa_cfg->regs.set_uproc_interrupt_reg32);
- writel(IPR_PCII_OPER_INTERRUPTS, ioa_cfg->regs.clr_interrupt_mask_reg32);
- if (ioa_cfg->sis64)
- writel(IPR_PCII_IPL_STAGE_CHANGE, ioa_cfg->regs.clr_interrupt_mask_reg);
+ if (ioa_cfg->sis64) {
+ maskval = IPR_PCII_IPL_STAGE_CHANGE;
+ maskval = (maskval << 32) | IPR_PCII_OPER_INTERRUPTS;
+ writeq(maskval, ioa_cfg->regs.clr_interrupt_mask_reg);
+ } else
+ writel(IPR_PCII_OPER_INTERRUPTS, ioa_cfg->regs.clr_interrupt_mask_reg32);
int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
@@ -7332,12 +7357,12 @@
rc = pci_restore_state(ioa_cfg->pdev);
if (rc != PCIBIOS_SUCCESSFUL) {
- ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
+ ipr_cmd->s.ioasa.hdr.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
return IPR_RC_JOB_CONTINUE;
}
if (ipr_set_pcix_cmd_reg(ioa_cfg)) {
- ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
+ ipr_cmd->s.ioasa.hdr.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
return IPR_RC_JOB_CONTINUE;
}
@@ -7364,7 +7389,7 @@
}
}
- ENTER;
+ LEAVE;
return IPR_RC_JOB_CONTINUE;
}
@@ -7406,7 +7431,7 @@
if (rc != PCIBIOS_SUCCESSFUL) {
pci_unblock_user_cfg_access(ipr_cmd->ioa_cfg->pdev);
- ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
+ ipr_cmd->s.ioasa.hdr.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
rc = IPR_RC_JOB_CONTINUE;
} else {
ipr_cmd->job_step = ipr_reset_bist_done;
@@ -7665,7 +7690,7 @@
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
do {
- ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
+ ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
if (ioa_cfg->reset_cmd != ipr_cmd) {
/*
@@ -8048,13 +8073,13 @@
ioarcb->u.sis64_addr_data.data_ioadl_addr =
cpu_to_be64(dma_addr + offsetof(struct ipr_cmnd, i.ioadl64));
ioarcb->u.sis64_addr_data.ioasa_host_pci_addr =
- cpu_to_be64(dma_addr + offsetof(struct ipr_cmnd, ioasa));
+ cpu_to_be64(dma_addr + offsetof(struct ipr_cmnd, s.ioasa64));
} else {
ioarcb->write_ioadl_addr =
cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, i.ioadl));
ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
ioarcb->ioasa_host_pci_addr =
- cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, ioasa));
+ cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, s.ioasa));
}
ioarcb->ioasa_len = cpu_to_be16(sizeof(struct ipr_ioasa));
ipr_cmd->cmd_index = i;
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index 4c267b5..9ecd225 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -244,6 +244,7 @@
#define IPR_RUNTIME_RESET 0x40000000
#define IPR_IPL_INIT_MIN_STAGE_TIME 5
+#define IPR_IPL_INIT_DEFAULT_STAGE_TIME 15
#define IPR_IPL_INIT_STAGE_UNKNOWN 0x0
#define IPR_IPL_INIT_STAGE_TRANSOP 0xB0000000
#define IPR_IPL_INIT_STAGE_MASK 0xff000000
@@ -613,7 +614,7 @@
__be32 data[SCSI_SENSE_BUFFERSIZE/sizeof(__be32)];
};
-struct ipr_ioasa {
+struct ipr_ioasa_hdr {
__be32 ioasc;
#define IPR_IOASC_SENSE_KEY(ioasc) ((ioasc) >> 24)
#define IPR_IOASC_SENSE_CODE(ioasc) (((ioasc) & 0x00ff0000) >> 16)
@@ -645,6 +646,25 @@
#define IPR_FIELD_POINTER_VALID (0x80000000 >> 8)
#define IPR_FIELD_POINTER_MASK 0x0000ffff
+}__attribute__((packed, aligned (4)));
+
+struct ipr_ioasa {
+ struct ipr_ioasa_hdr hdr;
+
+ union {
+ struct ipr_ioasa_vset vset;
+ struct ipr_ioasa_af_dasd dasd;
+ struct ipr_ioasa_gpdd gpdd;
+ struct ipr_ioasa_gata gata;
+ } u;
+
+ struct ipr_auto_sense auto_sense;
+}__attribute__((packed, aligned (4)));
+
+struct ipr_ioasa64 {
+ struct ipr_ioasa_hdr hdr;
+ u8 fd_res_path[8];
+
union {
struct ipr_ioasa_vset vset;
struct ipr_ioasa_af_dasd dasd;
@@ -804,7 +824,7 @@
}__attribute__((packed, aligned (4)));
struct ipr_hostrcb_type_ff_error {
- __be32 ioa_data[502];
+ __be32 ioa_data[758];
}__attribute__((packed, aligned (4)));
struct ipr_hostrcb_type_01_error {
@@ -1181,7 +1201,7 @@
u8 flags;
__be16 res_flags;
- __be32 type;
+ u8 type;
u8 qmodel;
struct ipr_std_inq_data std_inq_data;
@@ -1464,7 +1484,10 @@
struct ipr_ioadl64_desc ioadl64[IPR_NUM_IOADL_ENTRIES];
struct ipr_ata64_ioadl ata_ioadl;
} i;
- struct ipr_ioasa ioasa;
+ union {
+ struct ipr_ioasa ioasa;
+ struct ipr_ioasa64 ioasa64;
+ } s;
struct list_head queue;
struct scsi_cmnd *scsi_cmd;
struct ata_queued_cmd *qc;
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index bf55d30..fec47de 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -601,10 +601,8 @@
set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx);
write_unlock_bh(&tcp_sw_conn->sock->sk->sk_callback_lock);
- if (sk_sleep(sock->sk)) {
- sock->sk->sk_err = EIO;
- wake_up_interruptible(sk_sleep(sock->sk));
- }
+ sock->sk->sk_err = EIO;
+ wake_up_interruptible(sk_sleep(sock->sk));
iscsi_conn_stop(cls_conn, flag);
iscsi_sw_tcp_release_conn(conn);
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c
index 18735b3..3ddb4dc 100644
--- a/drivers/scsi/mac53c94.c
+++ b/drivers/scsi/mac53c94.c
@@ -542,8 +542,11 @@
static struct macio_driver mac53c94_driver =
{
- .name = "mac53c94",
- .match_table = mac53c94_match,
+ .driver = {
+ .name = "mac53c94",
+ .owner = THIS_MODULE,
+ .of_match_table = mac53c94_match,
+ },
.probe = mac53c94_probe,
.remove = mac53c94_remove,
};
diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index a1c97e8..1f784fd 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -2036,8 +2036,11 @@
static struct macio_driver mesh_driver =
{
- .name = "mesh",
- .match_table = mesh_match,
+ .driver = {
+ .name = "mesh",
+ .owner = THIS_MODULE,
+ .of_match_table = mesh_match,
+ },
.probe = mesh_probe,
.remove = mesh_remove,
.shutdown = mesh_shutdown,
diff --git a/drivers/scsi/mvme147.c b/drivers/scsi/mvme147.c
index 716d178..c29d0db 100644
--- a/drivers/scsi/mvme147.c
+++ b/drivers/scsi/mvme147.c
@@ -16,12 +16,12 @@
#include <linux/stat.h>
-static struct Scsi_Host *mvme147_host = NULL;
-
-static irqreturn_t mvme147_intr(int irq, void *dummy)
+static irqreturn_t mvme147_intr(int irq, void *data)
{
+ struct Scsi_Host *instance = data;
+
if (irq == MVME147_IRQ_SCSI_PORT)
- wd33c93_intr(mvme147_host);
+ wd33c93_intr(instance);
else
m147_pcc->dma_intr = 0x89; /* Ack and enable ints */
return IRQ_HANDLED;
@@ -29,7 +29,8 @@
static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
{
- struct WD33C93_hostdata *hdata = shost_priv(mvme147_host);
+ struct Scsi_Host *instance = cmd->device->host;
+ struct WD33C93_hostdata *hdata = shost_priv(instance);
unsigned char flags = 0x01;
unsigned long addr = virt_to_bus(cmd->SCp.ptr);
@@ -66,6 +67,7 @@
int mvme147_detect(struct scsi_host_template *tpnt)
{
static unsigned char called = 0;
+ struct Scsi_Host *instance;
wd33c93_regs regs;
struct WD33C93_hostdata *hdata;
@@ -76,25 +78,25 @@
tpnt->proc_name = "MVME147";
tpnt->proc_info = &wd33c93_proc_info;
- mvme147_host = scsi_register(tpnt, sizeof(struct WD33C93_hostdata));
- if (!mvme147_host)
+ instance = scsi_register(tpnt, sizeof(struct WD33C93_hostdata));
+ if (!instance)
goto err_out;
- mvme147_host->base = 0xfffe4000;
- mvme147_host->irq = MVME147_IRQ_SCSI_PORT;
+ instance->base = 0xfffe4000;
+ instance->irq = MVME147_IRQ_SCSI_PORT;
regs.SASR = (volatile unsigned char *)0xfffe4000;
regs.SCMD = (volatile unsigned char *)0xfffe4001;
- hdata = shost_priv(mvme147_host);
+ hdata = shost_priv(instance);
hdata->no_sync = 0xff;
hdata->fast = 0;
hdata->dma_mode = CTRL_DMA;
- wd33c93_init(mvme147_host, regs, dma_setup, dma_stop, WD33C93_FS_8_10);
+ wd33c93_init(instance, regs, dma_setup, dma_stop, WD33C93_FS_8_10);
if (request_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr, 0,
- "MVME147 SCSI PORT", mvme147_intr))
+ "MVME147 SCSI PORT", instance))
goto err_unregister;
if (request_irq(MVME147_IRQ_SCSI_DMA, mvme147_intr, 0,
- "MVME147 SCSI DMA", mvme147_intr))
+ "MVME147 SCSI DMA", instance))
goto err_free_irq;
#if 0 /* Disabled; causes problems booting */
m147_pcc->scsi_interrupt = 0x10; /* Assert SCSI bus reset */
@@ -113,7 +115,7 @@
err_free_irq:
free_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr);
err_unregister:
- scsi_unregister(mvme147_host);
+ scsi_unregister(instance);
err_out:
return 0;
}
@@ -132,9 +134,6 @@
return SUCCESS;
}
-#define HOSTS_C
-
-#include "mvme147.h"
static struct scsi_host_template driver_template = {
.proc_name = "MVME147",
diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
index 8dbf1c3..d64b717 100644
--- a/drivers/scsi/osst.c
+++ b/drivers/scsi/osst.c
@@ -3587,7 +3587,7 @@
if (i == (-ENOSPC)) {
transfer = STp->buffer->writing; /* FIXME -- check this logic */
if (transfer <= do_count) {
- filp->f_pos += do_count - transfer;
+ *ppos += do_count - transfer;
count -= do_count - transfer;
if (STps->drv_block >= 0) {
STps->drv_block += (do_count - transfer) / STp->block_size;
@@ -3625,7 +3625,7 @@
goto out;
}
- filp->f_pos += do_count;
+ *ppos += do_count;
b_point += do_count;
count -= do_count;
if (STps->drv_block >= 0) {
@@ -3647,7 +3647,7 @@
if (STps->drv_block >= 0) {
STps->drv_block += blks;
}
- filp->f_pos += count;
+ *ppos += count;
count = 0;
}
@@ -3823,7 +3823,7 @@
}
STp->logical_blk_num += transfer / STp->block_size;
STps->drv_block += transfer / STp->block_size;
- filp->f_pos += transfer;
+ *ppos += transfer;
buf += transfer;
total += transfer;
}
@@ -5626,6 +5626,7 @@
.open = os_scsi_tape_open,
.flush = os_scsi_tape_flush,
.release = os_scsi_tape_close,
+ .llseek = noop_llseek,
};
static int osst_supports(struct scsi_device * SDp)
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 9798c2c..1c027a9 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -492,19 +492,20 @@
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
unsigned long flags;
enum scsi_target_state state;
- int empty;
+ int empty = 0;
spin_lock_irqsave(shost->host_lock, flags);
state = starget->state;
- empty = --starget->reap_ref == 0 &&
- list_empty(&starget->devices) ? 1 : 0;
+ if (--starget->reap_ref == 0 && list_empty(&starget->devices)) {
+ empty = 1;
+ starget->state = STARGET_DEL;
+ }
spin_unlock_irqrestore(shost->host_lock, flags);
if (!empty)
return;
BUG_ON(state == STARGET_DEL);
- starget->state = STARGET_DEL;
if (state == STARGET_CREATED)
scsi_target_destroy(starget);
else
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 829cc37..8802e48 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -97,6 +97,7 @@
#endif
static int sd_revalidate_disk(struct gendisk *);
+static void sd_unlock_native_capacity(struct gendisk *disk);
static int sd_probe(struct device *);
static int sd_remove(struct device *);
static void sd_shutdown(struct device *);
@@ -1101,6 +1102,7 @@
#endif
.media_changed = sd_media_changed,
.revalidate_disk = sd_revalidate_disk,
+ .unlock_native_capacity = sd_unlock_native_capacity,
};
static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
@@ -2121,6 +2123,26 @@
}
/**
+ * sd_unlock_native_capacity - unlock native capacity
+ * @disk: struct gendisk to set capacity for
+ *
+ * Block layer calls this function if it detects that partitions
+ * on @disk reach beyond the end of the device. If the SCSI host
+ * implements ->unlock_native_capacity() method, it's invoked to
+ * give it a chance to adjust the device capacity.
+ *
+ * CONTEXT:
+ * Defined by block layer. Might sleep.
+ */
+static void sd_unlock_native_capacity(struct gendisk *disk)
+{
+ struct scsi_device *sdev = scsi_disk(disk)->device;
+
+ if (sdev->host->hostt->unlock_native_capacity)
+ sdev->host->hostt->unlock_native_capacity(sdev);
+}
+
+/**
* sd_format_disk_name - format disk name
* @prefix: name prefix - ie. "sd" for SCSI disks
* @index: index of the disk to format name for
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 3ea1a71..24211d0 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -3962,6 +3962,7 @@
.open = st_open,
.flush = st_flush,
.release = st_release,
+ .llseek = noop_llseek,
};
static int st_probe(struct device *dev)
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 01c012d..746a446 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -982,6 +982,18 @@
#define PCI_SUBDEVICE_ID_POCTAL422 0x0408
#define PCI_VENDOR_ID_ADVANTECH 0x13fe
#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620
+#define PCI_DEVICE_ID_TITAN_200I 0x8028
+#define PCI_DEVICE_ID_TITAN_400I 0x8048
+#define PCI_DEVICE_ID_TITAN_800I 0x8088
+#define PCI_DEVICE_ID_TITAN_800EH 0xA007
+#define PCI_DEVICE_ID_TITAN_800EHB 0xA008
+#define PCI_DEVICE_ID_TITAN_400EH 0xA009
+#define PCI_DEVICE_ID_TITAN_100E 0xA010
+#define PCI_DEVICE_ID_TITAN_200E 0xA012
+#define PCI_DEVICE_ID_TITAN_400E 0xA013
+#define PCI_DEVICE_ID_TITAN_800E 0xA014
+#define PCI_DEVICE_ID_TITAN_200EI 0xA016
+#define PCI_DEVICE_ID_TITAN_200EISI 0xA017
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
@@ -1541,6 +1553,10 @@
pbn_b3_4_115200,
pbn_b3_8_115200,
+ pbn_b4_bt_2_921600,
+ pbn_b4_bt_4_921600,
+ pbn_b4_bt_8_921600,
+
/*
* Board-specific versions.
*/
@@ -1995,6 +2011,25 @@
.uart_offset = 8,
},
+ [pbn_b4_bt_2_921600] = {
+ .flags = FL_BASE4,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b4_bt_4_921600] = {
+ .flags = FL_BASE4,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b4_bt_8_921600] = {
+ .flags = FL_BASE4,
+ .num_ports = 8,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+
/*
* Entries following this are board-specific.
*/
@@ -3043,6 +3078,42 @@
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_8_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200I,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b4_bt_2_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400I,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b4_bt_4_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800I,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b4_bt_8_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400EH,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EH,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EHB,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_1_4000000 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_2_4000000 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_4_4000000 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_8_4000000 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_2_4000000 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi_2_4000000 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c
index bcee156..0f11896 100644
--- a/drivers/serial/altera_uart.c
+++ b/drivers/serial/altera_uart.c
@@ -89,15 +89,12 @@
static unsigned int altera_uart_get_mctrl(struct uart_port *port)
{
struct altera_uart *pp = container_of(port, struct altera_uart, port);
- unsigned long flags;
unsigned int sigs;
- spin_lock_irqsave(&port->lock, flags);
sigs =
(readl(port->membase + ALTERA_UART_STATUS_REG) &
ALTERA_UART_STATUS_CTS_MSK) ? TIOCM_CTS : 0;
sigs |= (pp->sigs & TIOCM_RTS);
- spin_unlock_irqrestore(&port->lock, flags);
return sigs;
}
@@ -105,49 +102,37 @@
static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs)
{
struct altera_uart *pp = container_of(port, struct altera_uart, port);
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
pp->sigs = sigs;
if (sigs & TIOCM_RTS)
pp->imr |= ALTERA_UART_CONTROL_RTS_MSK;
else
pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK;
writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
- spin_unlock_irqrestore(&port->lock, flags);
}
static void altera_uart_start_tx(struct uart_port *port)
{
struct altera_uart *pp = container_of(port, struct altera_uart, port);
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK;
writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
- spin_unlock_irqrestore(&port->lock, flags);
}
static void altera_uart_stop_tx(struct uart_port *port)
{
struct altera_uart *pp = container_of(port, struct altera_uart, port);
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
- spin_unlock_irqrestore(&port->lock, flags);
}
static void altera_uart_stop_rx(struct uart_port *port)
{
struct altera_uart *pp = container_of(port, struct altera_uart, port);
- unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK;
writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
- spin_unlock_irqrestore(&port->lock, flags);
}
static void altera_uart_break_ctl(struct uart_port *port, int break_state)
@@ -272,10 +257,14 @@
unsigned int isr;
isr = readl(port->membase + ALTERA_UART_STATUS_REG) & pp->imr;
+
+ spin_lock(&port->lock);
if (isr & ALTERA_UART_STATUS_RRDY_MSK)
altera_uart_rx_chars(pp);
if (isr & ALTERA_UART_STATUS_TRDY_MSK)
altera_uart_tx_chars(pp);
+ spin_unlock(&port->lock);
+
return IRQ_RETVAL(isr);
}
@@ -402,31 +391,24 @@
return 0;
}
-static void altera_uart_console_putc(struct console *co, const char c)
+static void altera_uart_console_putc(struct uart_port *port, const char c)
{
- struct uart_port *port = &(altera_uart_ports + co->index)->port;
- int i;
+ while (!(readl(port->membase + ALTERA_UART_STATUS_REG) &
+ ALTERA_UART_STATUS_TRDY_MSK))
+ cpu_relax();
- for (i = 0; i < 0x10000; i++) {
- if (readl(port->membase + ALTERA_UART_STATUS_REG) &
- ALTERA_UART_STATUS_TRDY_MSK)
- break;
- }
writel(c, port->membase + ALTERA_UART_TXDATA_REG);
- for (i = 0; i < 0x10000; i++) {
- if (readl(port->membase + ALTERA_UART_STATUS_REG) &
- ALTERA_UART_STATUS_TRDY_MSK)
- break;
- }
}
static void altera_uart_console_write(struct console *co, const char *s,
unsigned int count)
{
+ struct uart_port *port = &(altera_uart_ports + co->index)->port;
+
for (; count; count--, s++) {
- altera_uart_console_putc(co, *s);
+ altera_uart_console_putc(port, *s);
if (*s == '\n')
- altera_uart_console_putc(co, '\r');
+ altera_uart_console_putc(port, '\r');
}
}
@@ -516,7 +498,7 @@
return 0;
}
-static int altera_uart_remove(struct platform_device *pdev)
+static int __devexit altera_uart_remove(struct platform_device *pdev)
{
struct uart_port *port;
int i;
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 96f7e74..511cbf6 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -797,7 +797,7 @@
gpio_free(uart->rts_pin);
#endif
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- if (UART_GET_IER(uart) && EDSSI)
+ if (UART_GET_IER(uart) & EDSSI)
free_irq(uart->status_irq, uart);
#endif
}
@@ -869,7 +869,12 @@
}
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
- quot = uart_get_divisor(port, baud) - ANOMALY_05000230;
+ quot = uart_get_divisor(port, baud);
+
+ /* If discipline is not IRDA, apply ANOMALY_05000230 */
+ if (termios->c_line != N_IRDA)
+ quot -= ANOMALY_05000230;
+
spin_lock_irqsave(&uart->port.lock, flags);
UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15);
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 9eb62a2..cd6cf57 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -930,6 +930,83 @@
}
}
+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_CPM_CONSOLE)
+/*
+ * Write a string to the serial port
+ * Note that this is called with interrupts already disabled
+ */
+static void cpm_uart_early_write(struct uart_cpm_port *pinfo,
+ const char *string, u_int count)
+{
+ unsigned int i;
+ cbd_t __iomem *bdp, *bdbase;
+ unsigned char *cpm_outp_addr;
+
+ /* Get the address of the host memory buffer.
+ */
+ bdp = pinfo->tx_cur;
+ bdbase = pinfo->tx_bd_base;
+
+ /*
+ * Now, do each character. This is not as bad as it looks
+ * since this is a holding FIFO and not a transmitting FIFO.
+ * We could add the complexity of filling the entire transmit
+ * buffer, but we would just wait longer between accesses......
+ */
+ for (i = 0; i < count; i++, string++) {
+ /* Wait for transmitter fifo to empty.
+ * Ready indicates output is ready, and xmt is doing
+ * that, not that it is ready for us to send.
+ */
+ while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+ ;
+
+ /* Send the character out.
+ * If the buffer address is in the CPM DPRAM, don't
+ * convert it.
+ */
+ cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr),
+ pinfo);
+ *cpm_outp_addr = *string;
+
+ out_be16(&bdp->cbd_datlen, 1);
+ setbits16(&bdp->cbd_sc, BD_SC_READY);
+
+ if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
+ bdp = bdbase;
+ else
+ bdp++;
+
+ /* if a LF, also do CR... */
+ if (*string == 10) {
+ while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+ ;
+
+ cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr),
+ pinfo);
+ *cpm_outp_addr = 13;
+
+ out_be16(&bdp->cbd_datlen, 1);
+ setbits16(&bdp->cbd_sc, BD_SC_READY);
+
+ if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
+ bdp = bdbase;
+ else
+ bdp++;
+ }
+ }
+
+ /*
+ * Finally, Wait for transmitter & holding register to empty
+ * and restore the IER
+ */
+ while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+ ;
+
+ pinfo->tx_cur = bdp;
+}
+#endif
+
#ifdef CONFIG_CONSOLE_POLL
/* Serial polling routines for writing and reading from the uart while
* in an interrupt or debug context.
@@ -999,7 +1076,7 @@
static char ch[2];
ch[0] = (char)c;
- cpm_uart_early_write(pinfo->port.line, ch, 1);
+ cpm_uart_early_write(pinfo, ch, 1);
}
#endif /* CONFIG_CONSOLE_POLL */
@@ -1130,9 +1207,6 @@
u_int count)
{
struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index];
- unsigned int i;
- cbd_t __iomem *bdp, *bdbase;
- unsigned char *cp;
unsigned long flags;
int nolock = oops_in_progress;
@@ -1142,66 +1216,7 @@
spin_lock_irqsave(&pinfo->port.lock, flags);
}
- /* Get the address of the host memory buffer.
- */
- bdp = pinfo->tx_cur;
- bdbase = pinfo->tx_bd_base;
-
- /*
- * Now, do each character. This is not as bad as it looks
- * since this is a holding FIFO and not a transmitting FIFO.
- * We could add the complexity of filling the entire transmit
- * buffer, but we would just wait longer between accesses......
- */
- for (i = 0; i < count; i++, s++) {
- /* Wait for transmitter fifo to empty.
- * Ready indicates output is ready, and xmt is doing
- * that, not that it is ready for us to send.
- */
- while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
- ;
-
- /* Send the character out.
- * If the buffer address is in the CPM DPRAM, don't
- * convert it.
- */
- cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
- *cp = *s;
-
- out_be16(&bdp->cbd_datlen, 1);
- setbits16(&bdp->cbd_sc, BD_SC_READY);
-
- if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
- bdp = bdbase;
- else
- bdp++;
-
- /* if a LF, also do CR... */
- if (*s == 10) {
- while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
- ;
-
- cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
- *cp = 13;
-
- out_be16(&bdp->cbd_datlen, 1);
- setbits16(&bdp->cbd_sc, BD_SC_READY);
-
- if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
- bdp = bdbase;
- else
- bdp++;
- }
- }
-
- /*
- * Finally, Wait for transmitter & holding register to empty
- * and restore the IER
- */
- while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
- ;
-
- pinfo->tx_cur = bdp;
+ cpm_uart_early_write(pinfo, s, count);
if (unlikely(nolock)) {
local_irq_restore(flags);
diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c
index ecdc0fa..f8c816e 100644
--- a/drivers/serial/msm_serial.c
+++ b/drivers/serial/msm_serial.c
@@ -41,19 +41,6 @@
unsigned int imr;
};
-#define UART_TO_MSM(uart_port) ((struct msm_port *) uart_port)
-
-static inline void msm_write(struct uart_port *port, unsigned int val,
- unsigned int off)
-{
- __raw_writel(val, port->membase + off);
-}
-
-static inline unsigned int msm_read(struct uart_port *port, unsigned int off)
-{
- return __raw_readl(port->membase + off);
-}
-
static void msm_stop_tx(struct uart_port *port)
{
struct msm_port *msm_port = UART_TO_MSM(port);
@@ -320,11 +307,7 @@
struct msm_port *msm_port = UART_TO_MSM(port);
clk_enable(msm_port->clk);
-
- msm_write(port, 0xC0, UART_MREG);
- msm_write(port, 0xB2, UART_NREG);
- msm_write(port, 0x7D, UART_DREG);
- msm_write(port, 0x1C, UART_MNDREG);
+ msm_serial_set_mnd_regs(port);
}
static int msm_startup(struct uart_port *port)
@@ -706,6 +689,8 @@
if (unlikely(IS_ERR(msm_port->clk)))
return PTR_ERR(msm_port->clk);
port->uartclk = clk_get_rate(msm_port->clk);
+ printk(KERN_INFO "uartclk = %d\n", port->uartclk);
+
resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (unlikely(!resource))
diff --git a/drivers/serial/msm_serial.h b/drivers/serial/msm_serial.h
index 689f1fa..f6ca9ca 100644
--- a/drivers/serial/msm_serial.h
+++ b/drivers/serial/msm_serial.h
@@ -114,4 +114,60 @@
#define UART_MISR 0x0010
#define UART_ISR 0x0014
+#define UART_TO_MSM(uart_port) ((struct msm_port *) uart_port)
+
+static inline
+void msm_write(struct uart_port *port, unsigned int val, unsigned int off)
+{
+ __raw_writel(val, port->membase + off);
+}
+
+static inline
+unsigned int msm_read(struct uart_port *port, unsigned int off)
+{
+ return __raw_readl(port->membase + off);
+}
+
+/*
+ * Setup the MND registers to use the TCXO clock.
+ */
+static inline void msm_serial_set_mnd_regs_tcxo(struct uart_port *port)
+{
+ msm_write(port, 0x06, UART_MREG);
+ msm_write(port, 0xF1, UART_NREG);
+ msm_write(port, 0x0F, UART_DREG);
+ msm_write(port, 0x1A, UART_MNDREG);
+}
+
+/*
+ * Setup the MND registers to use the TCXO clock divided by 4.
+ */
+static inline void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port)
+{
+ msm_write(port, 0x18, UART_MREG);
+ msm_write(port, 0xF6, UART_NREG);
+ msm_write(port, 0x0F, UART_DREG);
+ msm_write(port, 0x0A, UART_MNDREG);
+}
+
+static inline
+void msm_serial_set_mnd_regs_from_uartclk(struct uart_port *port)
+{
+ if (port->uartclk == 19200000)
+ msm_serial_set_mnd_regs_tcxo(port);
+ else
+ msm_serial_set_mnd_regs_tcxoby4(port);
+}
+
+/*
+ * TROUT has a specific defect that makes it report it's uartclk
+ * as 19.2Mhz (TCXO) when it's actually 4.8Mhz (TCXO/4). This special
+ * cases TROUT to use the right clock.
+ */
+#ifdef CONFIG_MACH_TROUT
+#define msm_serial_set_mnd_regs msm_serial_set_mnd_regs_tcxoby4
+#else
+#define msm_serial_set_mnd_regs msm_serial_set_mnd_regs_from_uartclk
+#endif
+
#endif /* __DRIVERS_SERIAL_MSM_SERIAL_H */
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index cabbdc7..5b9cde7 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -2005,8 +2005,11 @@
MODULE_DEVICE_TABLE (of, pmz_match);
static struct macio_driver pmz_driver = {
- .name = "pmac_zilog",
- .match_table = pmz_match,
+ .driver = {
+ .name = "pmac_zilog",
+ .owner = THIS_MODULE,
+ .of_match_table = pmz_match,
+ },
.probe = pmz_attach,
.remove = pmz_detach,
.suspend = pmz_suspend,
diff --git a/drivers/serial/s5pv210.c b/drivers/serial/s5pv210.c
index 8dc0383..4a789e5 100644
--- a/drivers/serial/s5pv210.c
+++ b/drivers/serial/s5pv210.c
@@ -119,7 +119,7 @@
return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]);
}
-static struct platform_driver s5p_serial_drv = {
+static struct platform_driver s5p_serial_driver = {
.probe = s5p_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
@@ -130,19 +130,19 @@
static int __init s5pv210_serial_console_init(void)
{
- return s3c24xx_serial_initconsole(&s5p_serial_drv, s5p_uart_inf);
+ return s3c24xx_serial_initconsole(&s5p_serial_driver, s5p_uart_inf);
}
console_initcall(s5pv210_serial_console_init);
static int __init s5p_serial_init(void)
{
- return s3c24xx_serial_init(&s5p_serial_drv, *s5p_uart_inf);
+ return s3c24xx_serial_init(&s5p_serial_driver, *s5p_uart_inf);
}
static void __exit s5p_serial_exit(void)
{
- platform_driver_unregister(&s5p_serial_drv);
+ platform_driver_unregister(&s5p_serial_driver);
}
module_init(s5p_serial_init);
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index dadd686..ab17c08 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -715,6 +715,8 @@
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
@@ -724,8 +726,6 @@
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
- PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
- PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
@@ -768,17 +768,26 @@
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
+ PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */
+ PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */
+ PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */
PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
+ PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */
PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
+ PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */
+ PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */
+ PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */
PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
+ PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */
+ PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */
PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
@@ -792,21 +801,27 @@
PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
+ PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b),
PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
+ PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447),
PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a),
+ PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41),
PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab),
PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
+ PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38),
+ PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292),
PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
+ PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c
index ed7d958..544f2e2 100644
--- a/drivers/serial/suncore.c
+++ b/drivers/serial/suncore.c
@@ -71,7 +71,9 @@
con->index = line;
drv->cons = con;
- add_preferred_console(con->name, line, NULL);
+
+ if (!console_set_on_cmdline)
+ add_preferred_console(con->name, line, NULL);
return 1;
}
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 234459c..ffbf455 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1500,20 +1500,25 @@
static int __devexit su_remove(struct of_device *op)
{
struct uart_sunsu_port *up = dev_get_drvdata(&op->dev);
+ bool kbdms = false;
if (up->su_type == SU_PORT_MS ||
- up->su_type == SU_PORT_KBD) {
+ up->su_type == SU_PORT_KBD)
+ kbdms = true;
+
+ if (kbdms) {
#ifdef CONFIG_SERIO
serio_unregister_port(&up->serio);
#endif
- kfree(up);
- } else if (up->port.type != PORT_UNKNOWN) {
+ } else if (up->port.type != PORT_UNKNOWN)
uart_remove_one_port(&sunsu_reg, &up->port);
- }
if (up->port.membase)
of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
+ if (kbdms)
+ kfree(up);
+
dev_set_drvdata(&op->dev, NULL);
return 0;
diff --git a/drivers/sfi/sfi_acpi.c b/drivers/sfi/sfi_acpi.c
index 34aba30..f5b4ca5 100644
--- a/drivers/sfi/sfi_acpi.c
+++ b/drivers/sfi/sfi_acpi.c
@@ -173,3 +173,44 @@
sfi_acpi_put_table(table);
return ret;
}
+
+static ssize_t sfi_acpi_table_show(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf,
+ loff_t offset, size_t count)
+{
+ struct sfi_table_attr *tbl_attr =
+ container_of(bin_attr, struct sfi_table_attr, attr);
+ struct acpi_table_header *th = NULL;
+ struct sfi_table_key key;
+ ssize_t cnt;
+
+ key.sig = tbl_attr->name;
+ key.oem_id = NULL;
+ key.oem_table_id = NULL;
+
+ th = sfi_acpi_get_table(&key);
+ if (!th)
+ return 0;
+
+ cnt = memory_read_from_buffer(buf, count, &offset,
+ th, th->length);
+ sfi_acpi_put_table(th);
+
+ return cnt;
+}
+
+
+void __init sfi_acpi_sysfs_init(void)
+{
+ u32 tbl_cnt, i;
+ struct sfi_table_attr *tbl_attr;
+
+ tbl_cnt = XSDT_GET_NUM_ENTRIES(xsdt_va, u64);
+ for (i = 0; i < tbl_cnt; i++) {
+ tbl_attr =
+ sfi_sysfs_install_table(xsdt_va->table_offset_entry[i]);
+ tbl_attr->attr.read = sfi_acpi_table_show;
+ }
+
+ return;
+}
diff --git a/drivers/sfi/sfi_core.c b/drivers/sfi/sfi_core.c
index b204a09..ceba593 100644
--- a/drivers/sfi/sfi_core.c
+++ b/drivers/sfi/sfi_core.c
@@ -67,6 +67,7 @@
#include <linux/acpi.h>
#include <linux/init.h>
#include <linux/sfi.h>
+#include <linux/slab.h>
#include "sfi_core.h"
@@ -382,6 +383,104 @@
return -1;
}
+static struct kobject *sfi_kobj;
+static struct kobject *tables_kobj;
+
+static ssize_t sfi_table_show(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf,
+ loff_t offset, size_t count)
+{
+ struct sfi_table_attr *tbl_attr =
+ container_of(bin_attr, struct sfi_table_attr, attr);
+ struct sfi_table_header *th = NULL;
+ struct sfi_table_key key;
+ ssize_t cnt;
+
+ key.sig = tbl_attr->name;
+ key.oem_id = NULL;
+ key.oem_table_id = NULL;
+
+ if (strncmp(SFI_SIG_SYST, tbl_attr->name, SFI_SIGNATURE_SIZE)) {
+ th = sfi_get_table(&key);
+ if (!th)
+ return 0;
+
+ cnt = memory_read_from_buffer(buf, count, &offset,
+ th, th->len);
+ sfi_put_table(th);
+ } else
+ cnt = memory_read_from_buffer(buf, count, &offset,
+ syst_va, syst_va->header.len);
+
+ return cnt;
+}
+
+struct sfi_table_attr __init *sfi_sysfs_install_table(u64 pa)
+{
+ struct sfi_table_attr *tbl_attr;
+ struct sfi_table_header *th;
+ int ret;
+
+ tbl_attr = kzalloc(sizeof(struct sfi_table_attr), GFP_KERNEL);
+ if (!tbl_attr)
+ return NULL;
+
+ th = sfi_map_table(pa);
+ if (!th || !th->sig[0]) {
+ kfree(tbl_attr);
+ return NULL;
+ }
+
+ sysfs_attr_init(&tbl_attr->attr.attr);
+ memcpy(tbl_attr->name, th->sig, SFI_SIGNATURE_SIZE);
+
+ tbl_attr->attr.size = 0;
+ tbl_attr->attr.read = sfi_table_show;
+ tbl_attr->attr.attr.name = tbl_attr->name;
+ tbl_attr->attr.attr.mode = 0400;
+
+ ret = sysfs_create_bin_file(tables_kobj,
+ &tbl_attr->attr);
+ if (ret) {
+ kfree(tbl_attr);
+ tbl_attr = NULL;
+ }
+
+ sfi_unmap_table(th);
+ return tbl_attr;
+}
+
+static int __init sfi_sysfs_init(void)
+{
+ int tbl_cnt, i;
+
+ if (sfi_disabled)
+ return 0;
+
+ sfi_kobj = kobject_create_and_add("sfi", firmware_kobj);
+ if (!sfi_kobj)
+ return 0;
+
+ tables_kobj = kobject_create_and_add("tables", sfi_kobj);
+ if (!tables_kobj) {
+ kobject_put(sfi_kobj);
+ return 0;
+ }
+
+ sfi_sysfs_install_table(syst_pa);
+
+ tbl_cnt = SFI_GET_NUM_ENTRIES(syst_va, u64);
+
+ for (i = 0; i < tbl_cnt; i++)
+ sfi_sysfs_install_table(syst_va->pentry[i]);
+
+ sfi_acpi_sysfs_init();
+ kobject_uevent(sfi_kobj, KOBJ_ADD);
+ kobject_uevent(tables_kobj, KOBJ_ADD);
+ pr_info("SFI sysfs interfaces init success\n");
+ return 0;
+}
+
void __init sfi_init(void)
{
if (!acpi_disabled)
@@ -390,7 +489,7 @@
if (sfi_disabled)
return;
- pr_info("Simple Firmware Interface v0.7 http://simplefirmware.org\n");
+ pr_info("Simple Firmware Interface v0.81 http://simplefirmware.org\n");
if (sfi_find_syst() || sfi_parse_syst() || sfi_platform_init())
disable_sfi();
@@ -414,3 +513,9 @@
sfi_acpi_init();
}
+
+/*
+ * The reason we put it here becasue we need wait till the /sys/firmware
+ * is setup, then our interface can be registered in /sys/firmware/sfi
+ */
+core_initcall(sfi_sysfs_init);
diff --git a/drivers/sfi/sfi_core.h b/drivers/sfi/sfi_core.h
index da82d39..b7cf220 100644
--- a/drivers/sfi/sfi_core.h
+++ b/drivers/sfi/sfi_core.h
@@ -61,6 +61,12 @@
char *oem_table_id;
};
+/* sysfs interface */
+struct sfi_table_attr {
+ struct bin_attribute attr;
+ char name[8];
+};
+
#define SFI_ANY_KEY { .sig = NULL, .oem_id = NULL, .oem_table_id = NULL }
extern int __init sfi_acpi_init(void);
@@ -68,3 +74,5 @@
struct sfi_table_key *key);
struct sfi_table_header *sfi_get_table(struct sfi_table_key *key);
extern void sfi_put_table(struct sfi_table_header *table);
+extern struct sfi_table_attr __init *sfi_sysfs_install_table(u64 pa);
+extern void __init sfi_acpi_sysfs_init(void);
diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c
index c585574..e91a23e 100644
--- a/drivers/sh/intc.c
+++ b/drivers/sh/intc.c
@@ -16,6 +16,8 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/module.h>
@@ -855,8 +857,8 @@
primary = 1;
if (!data[0] && !data[1])
- pr_warning("intc: missing unique irq mask for "
- "irq %d (vect 0x%04x)\n", irq, irq2evt(irq));
+ pr_warning("missing unique irq mask for irq %d (vect 0x%04x)\n",
+ irq, irq2evt(irq));
data[0] = data[0] ? data[0] : intc_mask_data(desc, d, enum_id, 1);
data[1] = data[1] ? data[1] : intc_prio_data(desc, d, enum_id, 1);
@@ -952,7 +954,7 @@
struct intc_desc_int *d;
struct resource *res;
- pr_info("intc: Registered controller '%s' with %u IRQs\n",
+ pr_info("Registered controller '%s' with %u IRQs\n",
desc->name, hw->nr_vectors);
d = kzalloc(sizeof(*d), GFP_NOWAIT);
@@ -1148,7 +1150,7 @@
if (unlikely(!uimask))
return -ENOMEM;
- pr_info("intc: userimask support registered for levels 0 -> %d\n",
+ pr_info("userimask support registered for levels 0 -> %d\n",
default_prio_level - 1);
return 0;
@@ -1286,7 +1288,7 @@
}
if (error)
- pr_err("intc: sysdev registration error\n");
+ pr_err("sysdev registration error\n");
return error;
}
diff --git a/drivers/spi/mpc512x_psc_spi.c b/drivers/spi/mpc512x_psc_spi.c
index 28a126d..2534b1e 100644
--- a/drivers/spi/mpc512x_psc_spi.c
+++ b/drivers/spi/mpc512x_psc_spi.c
@@ -512,29 +512,29 @@
u64 regaddr64, size64;
s16 id = -1;
- regaddr_p = of_get_address(op->node, 0, &size64, NULL);
+ regaddr_p = of_get_address(op->dev.of_node, 0, &size64, NULL);
if (!regaddr_p) {
dev_err(&op->dev, "Invalid PSC address\n");
return -EINVAL;
}
- regaddr64 = of_translate_address(op->node, regaddr_p);
+ regaddr64 = of_translate_address(op->dev.of_node, regaddr_p);
/* get PSC id (0..11, used by port_config) */
if (op->dev.platform_data == NULL) {
const u32 *psc_nump;
- psc_nump = of_get_property(op->node, "cell-index", NULL);
+ psc_nump = of_get_property(op->dev.of_node, "cell-index", NULL);
if (!psc_nump || *psc_nump > 11) {
dev_err(&op->dev, "mpc512x_psc_spi: Device node %s "
"has invalid cell-index property\n",
- op->node->full_name);
+ op->dev.of_node->full_name);
return -EINVAL;
}
id = *psc_nump;
}
return mpc512x_psc_spi_do_probe(&op->dev, (u32) regaddr64, (u32) size64,
- irq_of_parse_and_map(op->node, 0), id);
+ irq_of_parse_and_map(op->dev.of_node, 0), id);
}
static int __exit mpc512x_psc_spi_of_remove(struct of_device *op)
@@ -550,12 +550,12 @@
MODULE_DEVICE_TABLE(of, mpc512x_psc_spi_of_match);
static struct of_platform_driver mpc512x_psc_spi_of_driver = {
- .match_table = mpc512x_psc_spi_of_match,
.probe = mpc512x_psc_spi_of_probe,
.remove = __exit_p(mpc512x_psc_spi_of_remove),
.driver = {
.name = "mpc512x-psc-spi",
.owner = THIS_MODULE,
+ .of_match_table = mpc512x_psc_spi_of_match,
},
};
diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c
index ffa111a..97ab0a8 100644
--- a/drivers/spi/spi_mpc8xxx.c
+++ b/drivers/spi/spi_mpc8xxx.c
@@ -66,28 +66,6 @@
__be32 receive;
};
-/* SPI Parameter RAM */
-struct spi_pram {
- __be16 rbase; /* Rx Buffer descriptor base address */
- __be16 tbase; /* Tx Buffer descriptor base address */
- u8 rfcr; /* Rx function code */
- u8 tfcr; /* Tx function code */
- __be16 mrblr; /* Max receive buffer length */
- __be32 rstate; /* Internal */
- __be32 rdp; /* Internal */
- __be16 rbptr; /* Internal */
- __be16 rbc; /* Internal */
- __be32 rxtmp; /* Internal */
- __be32 tstate; /* Internal */
- __be32 tdp; /* Internal */
- __be16 tbptr; /* Internal */
- __be16 tbc; /* Internal */
- __be32 txtmp; /* Internal */
- __be32 res; /* Tx temp. */
- __be16 rpbase; /* Relocation pointer (CPM1 only) */
- __be16 res1; /* Reserved */
-};
-
/* SPI Controller mode register definitions */
#define SPMODE_LOOP (1 << 30)
#define SPMODE_CI_INACTIVEHIGH (1 << 29)
diff --git a/drivers/spi/spi_ppc4xx.c b/drivers/spi/spi_ppc4xx.c
index 19c0b3b..d53466a 100644
--- a/drivers/spi/spi_ppc4xx.c
+++ b/drivers/spi/spi_ppc4xx.c
@@ -397,7 +397,7 @@
struct spi_master *master;
struct spi_bitbang *bbp;
struct resource resource;
- struct device_node *np = op->node;
+ struct device_node *np = op->dev.of_node;
struct device *dev = &op->dev;
struct device_node *opbnp;
int ret;
diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c
index 989e275..6dcda86 100644
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -625,9 +625,12 @@
ssb_printk(KERN_ERR PFX "No SPROM available!\n");
return -ENODEV;
}
-
- bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ?
- SSB_SPROM_BASE1 : SSB_SPROM_BASE31;
+ if (bus->chipco.dev) { /* can be unavailible! */
+ bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ?
+ SSB_SPROM_BASE1 : SSB_SPROM_BASE31;
+ } else {
+ bus->sprom_offset = SSB_SPROM_BASE1;
+ }
buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
if (!buf)
diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c
index 007bc3a..4f7cc8d 100644
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -185,6 +185,7 @@
/* this routine differs from specs as we do not access SPROM directly
on PCMCIA */
if (bus->bustype == SSB_BUSTYPE_PCI &&
+ bus->chipco.dev && /* can be unavailible! */
bus->chipco.dev->id.revision >= 31)
return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index b5c3b30..984a754 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -141,5 +141,11 @@
source "drivers/staging/adis16255/Kconfig"
+source "drivers/staging/xgifb/Kconfig"
+
+source "drivers/staging/mrst-touchscreen/Kconfig"
+
+source "drivers/staging/msm/Kconfig"
+
endif # !STAGING_EXCLUDE_BUILD
endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index e330dd5..9fa2513 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -51,3 +51,6 @@
obj-$(CONFIG_CXT1E1) += cxt1e1/
obj-$(CONFIG_TI_ST) += ti-st/
obj-$(CONFIG_ADIS16255) += adis16255/
+obj-$(CONFIG_FB_XGI) += xgifb/
+obj-$(CONFIG_TOUCHSCREEN_MRSTOUCH) += mrst-touchscreen/
+obj-$(CONFIG_MSM_STAGING) += msm/
diff --git a/drivers/staging/adis16255/Kconfig b/drivers/staging/adis16255/Kconfig
index a642be6..a883c1f 100644
--- a/drivers/staging/adis16255/Kconfig
+++ b/drivers/staging/adis16255/Kconfig
@@ -1,5 +1,5 @@
config ADIS16255
- tristate "Ananlog Devices ADIS16250/16255"
+ tristate "Analog Devices ADIS16250/16255"
depends on SPI && SYSFS
---help---
If you say yes here you get support for the Analog Devices
diff --git a/drivers/staging/adis16255/adis16255.c b/drivers/staging/adis16255/adis16255.c
index 1ba11f0..55d66e2 100644
--- a/drivers/staging/adis16255/adis16255.c
+++ b/drivers/staging/adis16255/adis16255.c
@@ -361,7 +361,7 @@
/*-------------------------------------------------------------------------*/
-static int spi_adis16255_probe(struct spi_device *spi)
+static int __devinit spi_adis16255_probe(struct spi_device *spi)
{
struct adis16255_init_data *init_data = spi->dev.platform_data;
@@ -421,7 +421,7 @@
return status;
}
-static int spi_adis16255_remove(struct spi_device *spi)
+static int __devexit spi_adis16255_remove(struct spi_device *spi)
{
struct spi_adis16255_data *spiadis = dev_get_drvdata(&spi->dev);
diff --git a/drivers/staging/batman-adv/bat_sysfs.c b/drivers/staging/batman-adv/bat_sysfs.c
index e2c000b..212bc21 100644
--- a/drivers/staging/batman-adv/bat_sysfs.c
+++ b/drivers/staging/batman-adv/bat_sysfs.c
@@ -225,9 +225,9 @@
NULL,
};
-static ssize_t transtable_local_read(struct kobject *kobj,
- struct bin_attribute *bin_attr,
- char *buff, loff_t off, size_t count)
+static ssize_t transtable_local_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buff, loff_t off, size_t count)
{
struct device *dev = to_dev(kobj->parent);
struct net_device *net_dev = to_net_dev(dev);
@@ -235,9 +235,9 @@
return hna_local_fill_buffer_text(net_dev, buff, count, off);
}
-static ssize_t transtable_global_read(struct kobject *kobj,
- struct bin_attribute *bin_attr,
- char *buff, loff_t off, size_t count)
+static ssize_t transtable_global_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buff, loff_t off, size_t count)
{
struct device *dev = to_dev(kobj->parent);
struct net_device *net_dev = to_net_dev(dev);
@@ -245,9 +245,9 @@
return hna_global_fill_buffer_text(net_dev, buff, count, off);
}
-static ssize_t originators_read(struct kobject *kobj,
- struct bin_attribute *bin_attr,
- char *buff, loff_t off, size_t count)
+static ssize_t originators_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buff, loff_t off, size_t count)
{
struct device *dev = to_dev(kobj->parent);
struct net_device *net_dev = to_net_dev(dev);
@@ -255,9 +255,9 @@
return orig_fill_buffer_text(net_dev, buff, count, off);
}
-static ssize_t vis_data_read(struct kobject *kobj,
- struct bin_attribute *bin_attr,
- char *buff, loff_t off, size_t count)
+static ssize_t vis_data_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buff, loff_t off, size_t count)
{
struct device *dev = to_dev(kobj->parent);
struct net_device *net_dev = to_net_dev(dev);
diff --git a/drivers/staging/batman-adv/device.c b/drivers/staging/batman-adv/device.c
index ad82ec4..32204b5 100644
--- a/drivers/staging/batman-adv/device.c
+++ b/drivers/staging/batman-adv/device.c
@@ -196,7 +196,7 @@
kfree(device_packet);
if (error)
- return error;
+ return -EFAULT;
return sizeof(struct icmp_packet);
}
@@ -309,7 +309,7 @@
struct device_packet *device_packet;
unsigned long flags;
- device_packet = kmalloc(sizeof(struct device_packet), GFP_KERNEL);
+ device_packet = kmalloc(sizeof(struct device_packet), GFP_ATOMIC);
if (!device_packet)
return;
diff --git a/drivers/staging/batman-adv/main.c b/drivers/staging/batman-adv/main.c
index 9d13979..74c70d5 100644
--- a/drivers/staging/batman-adv/main.c
+++ b/drivers/staging/batman-adv/main.c
@@ -127,7 +127,10 @@
return 0;
unreg_soft_device:
- unregister_netdevice(soft_device);
+ unregister_netdev(soft_device);
+ soft_device = NULL;
+ return -ENOMEM;
+
free_soft_device:
free_netdev(soft_device);
soft_device = NULL;
diff --git a/drivers/staging/batman-adv/send.c b/drivers/staging/batman-adv/send.c
index d8536e2..ac69ed8 100644
--- a/drivers/staging/batman-adv/send.c
+++ b/drivers/staging/batman-adv/send.c
@@ -440,6 +440,9 @@
hlist_del(&forw_packet->list);
spin_unlock_irqrestore(&forw_bcast_list_lock, flags);
+ if (atomic_read(&module_state) == MODULE_DEACTIVATING)
+ goto out;
+
/* rebroadcast packet */
rcu_read_lock();
list_for_each_entry_rcu(batman_if, &if_list, list) {
@@ -453,15 +456,15 @@
forw_packet->num_packets++;
- /* if we still have some more bcasts to send and we are not shutting
- * down */
- if ((forw_packet->num_packets < 3) &&
- (atomic_read(&module_state) != MODULE_DEACTIVATING))
+ /* if we still have some more bcasts to send */
+ if (forw_packet->num_packets < 3) {
_add_bcast_packet_to_list(forw_packet, ((5 * HZ) / 1000));
- else {
- forw_packet_free(forw_packet);
- atomic_inc(&bcast_queue_left);
+ return;
}
+
+out:
+ forw_packet_free(forw_packet);
+ atomic_inc(&bcast_queue_left);
}
void send_outstanding_bat_packet(struct work_struct *work)
@@ -476,6 +479,9 @@
hlist_del(&forw_packet->list);
spin_unlock_irqrestore(&forw_bat_list_lock, flags);
+ if (atomic_read(&module_state) == MODULE_DEACTIVATING)
+ goto out;
+
send_packet(forw_packet);
/**
@@ -483,10 +489,10 @@
* to determine the queues wake up time unless we are
* shutting down
*/
- if ((forw_packet->own) &&
- (atomic_read(&module_state) != MODULE_DEACTIVATING))
+ if (forw_packet->own)
schedule_own_packet(forw_packet->if_incoming);
+out:
/* don't count own packet */
if (!forw_packet->own)
atomic_inc(&batman_queue_left);
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index 8ce307e..aad4732 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -100,15 +100,6 @@
if COMEDI_ISA_DRIVERS && ISA
-config COMEDI_8255
- tristate "Generic 8255 support"
- default N
- ---help---
- Enable generic 8255 support.
-
- To compile this driver as a module, choose M here: the module will be
- called 8255.
-
config COMEDI_ACL7225B
tristate "ADlink NuDAQ ACL-7225b and compatibles support"
default N
@@ -130,6 +121,7 @@
config COMEDI_PCL724
tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
+ select COMEDI_8255
default N
---help---
Enable support for Advantech PCL-724, PCL-722, PCL-731 and
@@ -198,6 +190,7 @@
config COMEDI_PCM3724
tristate "Advantech PCM-3724 PC/104 card support"
+ select COMEDI_8255
default N
---help---
Enable support for Advantech PCM-3724 PC/104 cards.
@@ -232,18 +225,9 @@
To compile this driver as a module, choose M here: the module will be
called rti802.
-config COMEDI_DAS08
- tristate "DAS-08 compatible ISA, PC/104 and PCMCIA card support"
- default N
- ---help---
- Enable support for Keithley Metrabyte/ComputerBoards DAS08
- and compatible ISA and PC/104 cards
-
- To compile this driver as a module, choose M here: the module will be
- called das08.
-
config COMEDI_DAS16M1
tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
+ select COMEDI_8255
select COMEDI_FC
default N
---help---
@@ -254,6 +238,7 @@
config COMEDI_DAS16
tristate "DAS-16 compatible ISA and PC/104 card support"
+ select COMEDI_8255
select COMEDI_FC
default N
---help---
@@ -385,6 +370,7 @@
config COMEDI_AIO_AIO12_8
tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
+ select COMEDI_8255
default N
---help---
Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
@@ -466,6 +452,7 @@
config COMEDI_NI_ATMIO16D
tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support"
depends on ISAPNP && COMEDI_NI_COMMON
+ select COMEDI_8255
default N
---help---
Enable support for National Instruments AT-MIO16/AT-MIO16D cards.
@@ -667,6 +654,7 @@
config COMEDI_ADL_PCI6208
tristate "ADLink PCI-6208A support"
+ select COMEDI_8255
default N
---help---
Enable support for ADLink PCI-6208A cards
@@ -751,6 +739,7 @@
config COMEDI_ADV_PCI_DIO
tristate "Advantech PCI DIO card support"
+ select COMEDI_8255
default N
---help---
Enable support for Advantech PCI DIO cards
@@ -762,6 +751,7 @@
config COMEDI_AMPLC_DIO200
tristate "Amplicon PC272E and PCI272 DIO board support"
+ select COMEDI_8255
default N
---help---
Enable support for Amplicon PC272E and PCI272 DIO boards
@@ -771,6 +761,7 @@
config COMEDI_AMPLC_PC236
tristate "Amplicon PC36AT and PCI236 DIO board support"
+ select COMEDI_8255
default N
---help---
Enable support for Amplicon PC36AT and PCI236 DIO boards
@@ -799,6 +790,7 @@
config COMEDI_AMPLC_PCI230
tristate "Amplicon PCI230 and PCI260 support"
+ select COMEDI_8255
default N
---help---
Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
@@ -869,6 +861,7 @@
config COMEDI_DAQBOARD2000
tristate "IOtech DAQboard/2000 support"
+ select COMEDI_8255
default N
---help---
Enable support for the IOtech DAQboard/2000
@@ -896,6 +889,7 @@
config COMEDI_CB_PCIDAS64
tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
+ select COMEDI_8255
select COMEDI_FC
default N
---help---
@@ -907,6 +901,7 @@
config COMEDI_CB_PCIDAS
tristate "MeasurementComputing PCI-DAS support"
+ select COMEDI_8255
select COMEDI_FC
default N
---help---
@@ -920,6 +915,7 @@
config COMEDI_CB_PCIDDA
tristate "MeasurementComputing PCI-DDA series support"
+ select COMEDI_8255
default N
---help---
Enable support for ComputerBoards/MeasurementComputing PCI-DDA
@@ -931,6 +927,7 @@
config COMEDI_CB_PCIDIO
tristate "MeasurementComputing PCI-DIO series support"
+ select COMEDI_8255
default N
---help---
Enable support for ComputerBoards/MeasurementComputing PCI-DIO series
@@ -941,6 +938,7 @@
config COMEDI_CB_PCIMDAS
tristate "MeasurementComputing PCIM-DAS1602/16 support"
+ select COMEDI_8255
default N
---help---
Enable support for ComputerBoards/MeasurementComputing PCI Migration
@@ -951,6 +949,7 @@
config COMEDI_CB_PCIMDDA
tristate "MeasurementComputing PCIM-DDA06-16 support"
+ select COMEDI_8255
default N
---help---
Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
@@ -1026,6 +1025,7 @@
config COMEDI_NI_PCIDIO
tristate "NI PCI-DIO32HS, PCI-DIO96, PCI-6533, PCI-6503 support"
depends on COMEDI_MITE
+ select COMEDI_8255
default N
---help---
Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
@@ -1058,6 +1058,7 @@
config COMEDI_RTD520
tristate "Real Time Devices PCI4520/DM7520 support"
+ select COMEDI_8255
default N
---help---
Enable support for Real Time Devices PCI4520/DM7520
@@ -1097,7 +1098,7 @@
menuconfig COMEDI_PCMCIA_DRIVERS
tristate "Comedi PCMCIA drivers"
- depends on COMEDI && PCMCIA && PCCARD
+ depends on COMEDI && (PCMCIA || PCCARD)
default N
---help---
Enable comedi PCMCIA and PCCARD drivers to be built
@@ -1142,6 +1143,7 @@
config COMEDI_NI_DAQ_DIO24_CS
tristate "NI DAQ-Card DIO-24 PCMCIA support"
depends on COMEDI_NI_COMMON
+ select COMEDI_8255
default N
---help---
Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
@@ -1162,8 +1164,8 @@
config COMEDI_NI_MIO_CS
tristate "NI DAQCard E series PCMCIA support"
depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
- default N
select COMEDI_FC
+ default N
---help---
Enable support for the National Instruments PCMCIA DAQCard E series
DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
@@ -1265,7 +1267,8 @@
config COMEDI_NI_TIO
tristate "NI general purpose counter support"
- select COMEDI_MITE
+ depends on COMEDI_MITE
+ select COMEDI_8255
default N
---help---
Enable support for National Instruments general purpose counters.
@@ -1278,6 +1281,8 @@
config COMEDI_NI_LABPC
tristate "NI Lab-PC and compatibles ISA and PCI support"
+ depends on COMEDI_MITE
+ select COMEDI_8255
select COMEDI_FC
default N
---help---
@@ -1291,8 +1296,40 @@
endif # COMEDI_NI_COMMON
+config COMEDI_8255
+ tristate "Generic 8255 support"
+ depends on COMEDI
+ default N
+ ---help---
+ Enable generic 8255 support.
+
+ You should enable compilation this driver if you plan to use a board
+ that has an 8255 chip. For multifunction boards, the main driver will
+ configure the 8255 subdevice automatically.
+
+ Note that most PCI 8255 boards do NOT work with this driver, and
+ need a separate driver as a wrapper.
+
+ To compile this driver as a module, choose M here: the module will be
+ called 8255.
+
+config COMEDI_DAS08
+ tristate "DAS-08 compatible support"
+ depends on COMEDI
+ select COMEDI_8255
+ default N
+ ---help---
+ Enable support for DAS08 and compatible ISA, PC/104 and PCI cards.
+
+ Note that PCMCIA DAS08 cards are not directly supported by this
+ driver, and need a separate driver as a wrapper.
+
+ To compile this driver as a module, choose M here: the module will be
+ called das08.
+
config COMEDI_FC
tristate "Comedi shared functions for low-level driver support"
+ depends on COMEDI
default N
---help---
Enable support for shared functions for low-level drivers.
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index aced00e..aeb2c00 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -83,7 +83,7 @@
static int do_chaninfo_ioctl(struct comedi_device *dev,
struct comedi_chaninfo __user *arg);
static int do_bufinfo_ioctl(struct comedi_device *dev,
- struct comedi_bufinfo __user *arg);
+ struct comedi_bufinfo __user *arg, void *file);
static int do_cmd_ioctl(struct comedi_device *dev,
struct comedi_cmd __user *arg, void *file);
static int do_lock_ioctl(struct comedi_device *dev, unsigned int arg,
@@ -169,7 +169,8 @@
break;
case COMEDI_BUFINFO:
rc = do_bufinfo_ioctl(dev,
- (struct comedi_bufinfo __user *)arg);
+ (struct comedi_bufinfo __user *)arg,
+ file);
break;
case COMEDI_LOCK:
rc = do_lock_ioctl(dev, arg, file);
@@ -563,7 +564,7 @@
*/
static int do_bufinfo_ioctl(struct comedi_device *dev,
- struct comedi_bufinfo __user *arg)
+ struct comedi_bufinfo __user *arg, void *file)
{
struct comedi_bufinfo bi;
struct comedi_subdevice *s;
@@ -576,6 +577,10 @@
return -EINVAL;
s = dev->subdevices + bi.subdevice;
+
+ if (s->lock && s->lock != file)
+ return -EACCES;
+
async = s->async;
if (!async) {
@@ -584,8 +589,17 @@
bi.buf_read_ptr = 0;
bi.buf_write_count = 0;
bi.buf_read_count = 0;
+ bi.bytes_read = 0;
+ bi.bytes_written = 0;
goto copyback;
}
+ if (!s->busy) {
+ bi.bytes_read = 0;
+ bi.bytes_written = 0;
+ goto copyback_position;
+ }
+ if (s->busy != file)
+ return -EACCES;
if (bi.bytes_read && (s->subdev_flags & SDF_CMD_READ)) {
bi.bytes_read = comedi_buf_read_alloc(async, bi.bytes_read);
@@ -604,6 +618,7 @@
comedi_buf_write_free(async, bi.bytes_written);
}
+copyback_position:
bi.buf_write_count = async->buf_write_count;
bi.buf_write_ptr = async->buf_write_ptr;
bi.buf_read_count = async->buf_read_count;
@@ -1576,6 +1591,19 @@
while (nbytes > 0 && !retval) {
set_current_state(TASK_INTERRUPTIBLE);
+ if (!(comedi_get_subdevice_runflags(s) & SRF_RUNNING)) {
+ if (count == 0) {
+ if (comedi_get_subdevice_runflags(s) &
+ SRF_ERROR) {
+ retval = -EPIPE;
+ } else {
+ retval = 0;
+ }
+ do_become_nonbusy(dev, s);
+ }
+ break;
+ }
+
n = nbytes;
m = n;
@@ -1588,16 +1616,6 @@
n = m;
if (n == 0) {
- if (!(comedi_get_subdevice_runflags(s) & SRF_RUNNING)) {
- if (comedi_get_subdevice_runflags(s) &
- SRF_ERROR) {
- retval = -EPIPE;
- } else {
- retval = 0;
- }
- do_become_nonbusy(dev, s);
- break;
- }
if (file->f_flags & O_NONBLOCK) {
retval = -EAGAIN;
break;
diff --git a/drivers/staging/comedi/drivers/Makefile b/drivers/staging/comedi/drivers/Makefile
index 5ccf246..354fb7d 100644
--- a/drivers/staging/comedi/drivers/Makefile
+++ b/drivers/staging/comedi/drivers/Makefile
@@ -12,7 +12,6 @@
obj-$(CONFIG_COMEDI_SKEL) += skel.o
# Comedi ISA drivers
-obj-$(CONFIG_COMEDI_8255) += 8255.o
obj-$(CONFIG_COMEDI_ACL7225B) += acl7225b.o
obj-$(CONFIG_COMEDI_PCL711) += pcl711.o
obj-$(CONFIG_COMEDI_PCL724) += pcl724.o
@@ -26,7 +25,6 @@
obj-$(CONFIG_COMEDI_PCM3730) += pcm3730.o
obj-$(CONFIG_COMEDI_RTI800) += rti800.o
obj-$(CONFIG_COMEDI_RTI802) += rti802.o
-obj-$(CONFIG_COMEDI_DAS08) += das08.o
obj-$(CONFIG_COMEDI_DAS16M1) += das16m1.o
obj-$(CONFIG_COMEDI_DAS16) += das16.o
obj-$(CONFIG_COMEDI_DAS800) += das800.o
@@ -135,4 +133,6 @@
obj-$(CONFIG_COMEDI_NI_TIO) += ni_tiocmd.o
obj-$(CONFIG_COMEDI_NI_LABPC) += ni_labpc.o
+obj-$(CONFIG_COMEDI_8255) += 8255.o
+obj-$(CONFIG_COMEDI_DAS08) += das08.o
obj-$(CONFIG_COMEDI_FC) += comedi_fc.o
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.c b/drivers/staging/comedi/drivers/addi-data/addi_common.c
index 2c98641..b18e81d 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.c
@@ -68,6 +68,10 @@
#include "addi_common.h"
#include "addi_amcc_s5933.h"
+#ifndef ADDIDATA_DRIVER_NAME
+#define ADDIDATA_DRIVER_NAME "addi_common"
+#endif
+
/* Update-0.7.57->0.7.68MODULE_AUTHOR("ADDI-DATA GmbH <info@addi-data.com>"); */
/* Update-0.7.57->0.7.68MODULE_DESCRIPTION("Comedi ADDI-DATA module"); */
/* Update-0.7.57->0.7.68MODULE_LICENSE("GPL"); */
@@ -2528,7 +2532,7 @@
#define n_boardtypes (sizeof(boardtypes)/sizeof(struct addi_board))
static struct comedi_driver driver_addi = {
- .driver_name = "addi_common",
+ .driver_name = ADDIDATA_DRIVER_NAME,
.module = THIS_MODULE,
.attach = i_ADDI_Attach,
.detach = i_ADDI_Detach,
@@ -2570,10 +2574,6 @@
struct pcilst_struct *card = NULL;
unsigned char pci_bus, pci_slot, pci_func;
int i_Dma = 0;
- static char c_Identifier[150];
-
- sprintf(c_Identifier, "Addi-Data GmbH Comedi %s",
- this_board->pc_DriverName);
ret = alloc_private(dev, sizeof(struct addi_private));
if (ret < 0)
@@ -2583,7 +2583,7 @@
v_pci_card_list_init(this_board->i_VendorId, 1); /* 1 for displaying the list.. */
pci_list_builded = 1;
}
- /* printk("comedi%d: addi_common: board=%s",dev->minor,this_board->pc_DriverName); */
+ /* printk("comedi%d: "ADDIDATA_DRIVER_NAME": board=%s",dev->minor,this_board->pc_DriverName); */
if ((this_board->i_Dma) && (it->options[2] == 0)) {
i_Dma = 1;
@@ -2648,7 +2648,7 @@
if (irq > 0) {
if (request_irq(irq, v_ADDI_Interrupt, IRQF_SHARED,
- c_Identifier, dev) < 0) {
+ this_board->pc_DriverName, dev) < 0) {
printk(", unable to allocate IRQ %u, DISABLING IT",
irq);
irq = 0; /* Can't use IRQ */
diff --git a/drivers/staging/comedi/drivers/addi_apci_035.c b/drivers/staging/comedi/drivers/addi_apci_035.c
index da454e8..6dfcbe8 100644
--- a/drivers/staging/comedi/drivers/addi_apci_035.c
+++ b/drivers/staging/comedi/drivers/addi_apci_035.c
@@ -2,4 +2,6 @@
#define ADDIDATA_WATCHDOG 2 /* Or shold it be something else */
+#define ADDIDATA_DRIVER_NAME "addi_apci_035"
+
#include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_1032.c b/drivers/staging/comedi/drivers/addi_apci_1032.c
index fa2056e..4722ec8 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1032.c
@@ -1,3 +1,5 @@
#define CONFIG_APCI_1032 1
+#define ADDIDATA_DRIVER_NAME "addi_apci_1032"
+
#include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_1500.c b/drivers/staging/comedi/drivers/addi_apci_1500.c
index 7a5cae5..db3dafd 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1500.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1500.c
@@ -1,3 +1,5 @@
#define CONFIG_APCI_1500 1
+#define ADDIDATA_DRIVER_NAME "addi_apci_1500"
+
#include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_1516.c b/drivers/staging/comedi/drivers/addi_apci_1516.c
index 8d41484..f591baf 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1516.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1516.c
@@ -1,3 +1,5 @@
#define CONFIG_APCI_1516 1
+#define ADDIDATA_DRIVER_NAME "addi_apci_1516"
+
#include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_1564.c b/drivers/staging/comedi/drivers/addi_apci_1564.c
index 0351cdd..6f5c923 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1564.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1564.c
@@ -1,3 +1,5 @@
#define CONFIG_APCI_1564 1
+#define ADDIDATA_DRIVER_NAME "addi_apci_1564"
+
#include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_16xx.c b/drivers/staging/comedi/drivers/addi_apci_16xx.c
index 5067990..1d926ad 100644
--- a/drivers/staging/comedi/drivers/addi_apci_16xx.c
+++ b/drivers/staging/comedi/drivers/addi_apci_16xx.c
@@ -1,3 +1,5 @@
#define CONFIG_APCI_16XX 1
+#define ADDIDATA_DRIVER_NAME "addi_apci_16xx"
+
#include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_1710.c b/drivers/staging/comedi/drivers/addi_apci_1710.c
index c433445..df6ba8c 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1710.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1710.c
@@ -1,3 +1,5 @@
#define CONFIG_APCI_1710 1
+#define ADDIDATA_DRIVER_NAME "addi_apci_1710"
+
#include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_2016.c b/drivers/staging/comedi/drivers/addi_apci_2016.c
index 271c47c..7266e41 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2016.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2016.c
@@ -1,3 +1,5 @@
#define CONFIG_APCI_2016 1
+#define ADDIDATA_DRIVER_NAME "addi_apci_2016"
+
#include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_2032.c b/drivers/staging/comedi/drivers/addi_apci_2032.c
index 5108ea2..f67da94 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2032.c
@@ -1,3 +1,5 @@
#define CONFIG_APCI_2032 1
+#define ADDIDATA_DRIVER_NAME "addi_apci_2032"
+
#include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_2200.c b/drivers/staging/comedi/drivers/addi_apci_2200.c
index e439f83..bc7f7d6 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2200.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2200.c
@@ -1,3 +1,5 @@
#define CONFIG_APCI_2200 1
+#define ADDIDATA_DRIVER_NAME "addi_apci_2200"
+
#include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3001.c b/drivers/staging/comedi/drivers/addi_apci_3001.c
index df97c30..d86c420 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3001.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3001.c
@@ -1,3 +1,5 @@
#define CONFIG_APCI_3001 1
+#define ADDIDATA_DRIVER_NAME "addi_apci_3001"
+
#include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3120.c b/drivers/staging/comedi/drivers/addi_apci_3120.c
index 9183125..0b22cf1 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3120.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3120.c
@@ -1,3 +1,5 @@
#define CONFIG_APCI_3120 1
+#define ADDIDATA_DRIVER_NAME "addi_apci_3120"
+
#include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3200.c b/drivers/staging/comedi/drivers/addi_apci_3200.c
index f25a70b..1593139 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3200.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3200.c
@@ -1,3 +1,5 @@
#define CONFIG_APCI_3200 1
+#define ADDIDATA_DRIVER_NAME "addi_apci_3200"
+
#include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3300.c b/drivers/staging/comedi/drivers/addi_apci_3300.c
index 1ee4778..733c69a 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3300.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3300.c
@@ -1,3 +1,5 @@
#define CONFIG_APCI_3300 1
+#define ADDIDATA_DRIVER_NAME "addi_apci_3300"
+
#include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3501.c b/drivers/staging/comedi/drivers/addi_apci_3501.c
index 1049e20..d8a01b1 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3501.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3501.c
@@ -1,3 +1,5 @@
#define CONFIG_APCI_3501 1
+#define ADDIDATA_DRIVER_NAME "addi_apci_3501"
+
#include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3xxx.c b/drivers/staging/comedi/drivers/addi_apci_3xxx.c
index fb9deb7..942bc9e 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3xxx.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3xxx.c
@@ -1,3 +1,5 @@
#define CONFIG_APCI_3XXX 1
+#define ADDIDATA_DRIVER_NAME "addi_apci_3xxx"
+
#include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/adl_pci9111.c b/drivers/staging/comedi/drivers/adl_pci9111.c
index 36a254c..39d112b 100644
--- a/drivers/staging/comedi/drivers/adl_pci9111.c
+++ b/drivers/staging/comedi/drivers/adl_pci9111.c
@@ -824,9 +824,12 @@
plx9050_interrupt_control(dev_private->lcr_io_base, true, true,
false, true, true);
- dev_private->scan_delay =
- (async_cmd->scan_begin_arg / (async_cmd->convert_arg *
- async_cmd->chanlist_len)) - 1;
+ if (async_cmd->scan_begin_src == TRIG_TIMER) {
+ dev_private->scan_delay =
+ (async_cmd->scan_begin_arg /
+ (async_cmd->convert_arg *
+ async_cmd->chanlist_len)) - 1;
+ }
break;
diff --git a/drivers/staging/comedi/drivers/adv_pci_dio.c b/drivers/staging/comedi/drivers/adv_pci_dio.c
index 40eeecf..e424a0c 100644
--- a/drivers/staging/comedi/drivers/adv_pci_dio.c
+++ b/drivers/staging/comedi/drivers/adv_pci_dio.c
@@ -7,17 +7,17 @@
*/
/*
Driver: adv_pci_dio
-Description: Advantech PCI-1730, PCI-1733, PCI-1734, PCI-1736UP,
- PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754,
- PCI-1756, PCI-1762
+Description: Advantech PCI-1730, PCI-1733, PCI-1734, PCI-1735U,
+ PCI-1736UP, PCI-1750, PCI-1751, PCI-1752, PCI-1753/E,
+ PCI-1754, PCI-1756, PCI-1762
Author: Michal Dobes <dobes@tesnet.cz>
Devices: [Advantech] PCI-1730 (adv_pci_dio), PCI-1733,
- PCI-1734, PCI-1736UP, PCI-1750,
+ PCI-1734, PCI-1735U, PCI-1736UP, PCI-1750,
PCI-1751, PCI-1752, PCI-1753,
PCI-1753+PCI-1753E, PCI-1754, PCI-1756,
PCI-1760, PCI-1762
Status: untested
-Updated: Mon, 14 Apr 2008 10:43:08 +0100
+Updated: Tue, 04 May 2010 13:00:00 +0000
This driver supports now only insn interface for DI/DO/DIO.
@@ -35,6 +35,7 @@
#include "comedi_pci.h"
#include "8255.h"
+#include "8253.h"
#undef PCI_DIO_EXTDEBUG /* if defined, enable extensive debug logging */
@@ -49,7 +50,7 @@
/* hardware types of the cards */
enum hw_cards_id {
- TYPE_PCI1730, TYPE_PCI1733, TYPE_PCI1734, TYPE_PCI1736,
+ TYPE_PCI1730, TYPE_PCI1733, TYPE_PCI1734, TYPE_PCI1735, TYPE_PCI1736,
TYPE_PCI1750,
TYPE_PCI1751,
TYPE_PCI1752,
@@ -67,7 +68,10 @@
#define MAX_DI_SUBDEVS 2 /* max number of DI subdevices per card */
#define MAX_DO_SUBDEVS 2 /* max number of DO subdevices per card */
#define MAX_DIO_SUBDEVG 2 /* max number of DIO subdevices group per card */
+#define MAX_8254_SUBDEVS 1 /* max number of 8254 counter subdevs per card */
+ /* (could be more than one 8254 per subdevice) */
+#define SIZE_8254 4 /* 8254 IO space length */
#define SIZE_8255 4 /* 8255 IO space length */
#define PCIDIO_MAINREG 2 /* main I/O region for all Advantech cards? */
@@ -85,6 +89,12 @@
#define PCI1734_IDO 0 /* W: Isolated digital output 0-31 */
#define PCI173x_BOARDID 4 /* R: Board I/D switch for 1730/3/4 */
+/* Advantech PCI-1735U */
+#define PCI1735_DI 0 /* R: Digital input 0-31 */
+#define PCI1735_DO 0 /* W: Digital output 0-31 */
+#define PCI1735_C8254 4 /* R/W: 8254 counter */
+#define PCI1735_BOARDID 8 /* R: Board I/D switch for 1735U */
+
/* Advantech PCI-1736UP */
#define PCI1736_IDI 0 /* R: Isolated digital input 0-15 */
#define PCI1736_IDO 0 /* W: Isolated digital output 0-15 */
@@ -192,7 +202,8 @@
struct diosubd_data {
int chans; /* num of chans */
int addr; /* PCI address ofset */
- int regs; /* number of registers to read or 8255 subdevices */
+ int regs; /* number of registers to read or 8255
+ subdevices or 8254 chips */
unsigned int specflags; /* addon subdevice flags */
};
@@ -206,6 +217,7 @@
struct diosubd_data sdo[MAX_DO_SUBDEVS]; /* DO chans */
struct diosubd_data sdio[MAX_DIO_SUBDEVG]; /* DIO 8255 chans */
struct diosubd_data boardid; /* card supports board ID switch */
+ struct diosubd_data s8254[MAX_8254_SUBDEVS]; /* 8254 subdevices */
enum hw_io_access io_access;
};
@@ -214,6 +226,7 @@
PCI_VENDOR_ID_ADVANTECH, 0x1730, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
PCI_VENDOR_ID_ADVANTECH, 0x1733, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
PCI_VENDOR_ID_ADVANTECH, 0x1734, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
+ PCI_VENDOR_ID_ADVANTECH, 0x1735, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
PCI_VENDOR_ID_ADVANTECH, 0x1736, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
PCI_VENDOR_ID_ADVANTECH, 0x1750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
PCI_VENDOR_ID_ADVANTECH, 0x1751, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
@@ -235,14 +248,15 @@
{{16, PCI1730_DO, 2, 0}, {16, PCI1730_IDO, 2, 0}},
{{0, 0, 0, 0}, {0, 0, 0, 0}},
{4, PCI173x_BOARDID, 1, SDF_INTERNAL},
- IO_8b,
- },
+ {{0, 0, 0, 0}},
+ IO_8b},
{"pci1733", PCI_VENDOR_ID_ADVANTECH, 0x1733, PCIDIO_MAINREG,
TYPE_PCI1733,
{{0, 0, 0, 0}, {32, PCI1733_IDI, 4, 0}},
{{0, 0, 0, 0}, {0, 0, 0, 0}},
{{0, 0, 0, 0}, {0, 0, 0, 0}},
{4, PCI173x_BOARDID, 1, SDF_INTERNAL},
+ {{0, 0, 0, 0}},
IO_8b},
{"pci1734", PCI_VENDOR_ID_ADVANTECH, 0x1734, PCIDIO_MAINREG,
TYPE_PCI1734,
@@ -250,6 +264,15 @@
{{0, 0, 0, 0}, {32, PCI1734_IDO, 4, 0}},
{{0, 0, 0, 0}, {0, 0, 0, 0}},
{4, PCI173x_BOARDID, 1, SDF_INTERNAL},
+ {{0, 0, 0, 0}},
+ IO_8b},
+ {"pci1735", PCI_VENDOR_ID_ADVANTECH, 0x1735, PCIDIO_MAINREG,
+ TYPE_PCI1735,
+ {{32, PCI1735_DI, 4, 0}, {0, 0, 0, 0}},
+ {{32, PCI1735_DO, 4, 0}, {0, 0, 0, 0}},
+ {{0, 0, 0, 0}, {0, 0, 0, 0}},
+ { 4, PCI1735_BOARDID, 1, SDF_INTERNAL},
+ {{3, PCI1735_C8254, 1, 0}},
IO_8b},
{"pci1736", PCI_VENDOR_ID_ADVANTECH, 0x1736, PCI1736_MAINREG,
TYPE_PCI1736,
@@ -257,14 +280,15 @@
{{0, 0, 0, 0}, {16, PCI1736_IDO, 2, 0}},
{{0, 0, 0, 0}, {0, 0, 0, 0}},
{4, PCI1736_BOARDID, 1, SDF_INTERNAL},
- IO_8b,
- },
+ {{0, 0, 0, 0}},
+ IO_8b},
{"pci1750", PCI_VENDOR_ID_ADVANTECH, 0x1750, PCIDIO_MAINREG,
TYPE_PCI1750,
{{0, 0, 0, 0}, {16, PCI1750_IDI, 2, 0}},
{{0, 0, 0, 0}, {16, PCI1750_IDO, 2, 0}},
{{0, 0, 0, 0}, {0, 0, 0, 0}},
{0, 0, 0, 0},
+ {{0, 0, 0, 0}},
IO_8b},
{"pci1751", PCI_VENDOR_ID_ADVANTECH, 0x1751, PCIDIO_MAINREG,
TYPE_PCI1751,
@@ -272,6 +296,7 @@
{{0, 0, 0, 0}, {0, 0, 0, 0}},
{{48, PCI1751_DIO, 2, 0}, {0, 0, 0, 0}},
{0, 0, 0, 0},
+ {{0, 0, 0, 0}},
IO_8b},
{"pci1752", PCI_VENDOR_ID_ADVANTECH, 0x1752, PCIDIO_MAINREG,
TYPE_PCI1752,
@@ -279,6 +304,7 @@
{{32, PCI1752_IDO, 2, 0}, {32, PCI1752_IDO2, 2, 0}},
{{0, 0, 0, 0}, {0, 0, 0, 0}},
{4, PCI175x_BOARDID, 1, SDF_INTERNAL},
+ {{0, 0, 0, 0}},
IO_16b},
{"pci1753", PCI_VENDOR_ID_ADVANTECH, 0x1753, PCIDIO_MAINREG,
TYPE_PCI1753,
@@ -286,6 +312,7 @@
{{0, 0, 0, 0}, {0, 0, 0, 0}},
{{96, PCI1753_DIO, 4, 0}, {0, 0, 0, 0}},
{0, 0, 0, 0},
+ {{0, 0, 0, 0}},
IO_8b},
{"pci1753e", PCI_VENDOR_ID_ADVANTECH, 0x1753, PCIDIO_MAINREG,
TYPE_PCI1753E,
@@ -293,6 +320,7 @@
{{0, 0, 0, 0}, {0, 0, 0, 0}},
{{96, PCI1753_DIO, 4, 0}, {96, PCI1753E_DIO, 4, 0}},
{0, 0, 0, 0},
+ {{0, 0, 0, 0}},
IO_8b},
{"pci1754", PCI_VENDOR_ID_ADVANTECH, 0x1754, PCIDIO_MAINREG,
TYPE_PCI1754,
@@ -300,6 +328,7 @@
{{0, 0, 0, 0}, {0, 0, 0, 0}},
{{0, 0, 0, 0}, {0, 0, 0, 0}},
{4, PCI175x_BOARDID, 1, SDF_INTERNAL},
+ {{0, 0, 0, 0}},
IO_16b},
{"pci1756", PCI_VENDOR_ID_ADVANTECH, 0x1756, PCIDIO_MAINREG,
TYPE_PCI1756,
@@ -307,6 +336,7 @@
{{0, 0, 0, 0}, {32, PCI1756_IDO, 2, 0}},
{{0, 0, 0, 0}, {0, 0, 0, 0}},
{4, PCI175x_BOARDID, 1, SDF_INTERNAL},
+ {{0, 0, 0, 0}},
IO_16b},
{"pci1760", PCI_VENDOR_ID_ADVANTECH, 0x1760, 0,
TYPE_PCI1760,
@@ -314,6 +344,7 @@
{{0, 0, 0, 0}, {0, 0, 0, 0}},
{{0, 0, 0, 0}, {0, 0, 0, 0}},
{0, 0, 0, 0},
+ {{0, 0, 0, 0}},
IO_8b},
{"pci1762", PCI_VENDOR_ID_ADVANTECH, 0x1762, PCIDIO_MAINREG,
TYPE_PCI1762,
@@ -321,6 +352,7 @@
{{0, 0, 0, 0}, {16, PCI1762_RO, 1, 0}},
{{0, 0, 0, 0}, {0, 0, 0, 0}},
{4, PCI1762_BOARDID, 1, SDF_INTERNAL},
+ {{0, 0, 0, 0}},
IO_16b}
};
@@ -440,6 +472,83 @@
/*
==============================================================================
*/
+static int pci_8254_insn_read(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data)
+{
+ const struct diosubd_data *d = (const struct diosubd_data *)s->private;
+ unsigned int chan, chip, chipchan;
+ unsigned long flags;
+
+ chan = CR_CHAN(insn->chanspec); /* channel on subdevice */
+ chip = chan / 3; /* chip on subdevice */
+ chipchan = chan - (3 * chip); /* channel on chip on subdevice */
+ spin_lock_irqsave(&s->spin_lock, flags);
+ data[0] = i8254_read(dev->iobase + d->addr + (SIZE_8254 * chip),
+ 0, chipchan);
+ spin_unlock_irqrestore(&s->spin_lock, flags);
+ return 1;
+}
+
+/*
+==============================================================================
+*/
+static int pci_8254_insn_write(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data)
+{
+ const struct diosubd_data *d = (const struct diosubd_data *)s->private;
+ unsigned int chan, chip, chipchan;
+ unsigned long flags;
+
+ chan = CR_CHAN(insn->chanspec); /* channel on subdevice */
+ chip = chan / 3; /* chip on subdevice */
+ chipchan = chan - (3 * chip); /* channel on chip on subdevice */
+ spin_lock_irqsave(&s->spin_lock, flags);
+ i8254_write(dev->iobase + d->addr + (SIZE_8254 * chip),
+ 0, chipchan, data[0]);
+ spin_unlock_irqrestore(&s->spin_lock, flags);
+ return 1;
+}
+
+/*
+==============================================================================
+*/
+static int pci_8254_insn_config(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data)
+{
+ const struct diosubd_data *d = (const struct diosubd_data *)s->private;
+ unsigned int chan, chip, chipchan;
+ unsigned long iobase;
+ int ret = 0;
+ unsigned long flags;
+
+ chan = CR_CHAN(insn->chanspec); /* channel on subdevice */
+ chip = chan / 3; /* chip on subdevice */
+ chipchan = chan - (3 * chip); /* channel on chip on subdevice */
+ iobase = dev->iobase + d->addr + (SIZE_8254 * chip);
+ spin_lock_irqsave(&s->spin_lock, flags);
+ switch (data[0]) {
+ case INSN_CONFIG_SET_COUNTER_MODE:
+ ret = i8254_set_mode(iobase, 0, chipchan, data[1]);
+ if (ret < 0)
+ ret = -EINVAL;
+ break;
+ case INSN_CONFIG_8254_READ_STATUS:
+ data[1] = i8254_status(iobase, 0, chipchan);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ spin_unlock_irqrestore(&s->spin_lock, flags);
+ return ret < 0 ? ret : insn->n;
+}
+
+/*
+==============================================================================
+*/
static int pci1760_unchecked_mbxrequest(struct comedi_device *dev,
unsigned char *omb, unsigned char *imb,
int repeats)
@@ -708,6 +817,15 @@
outb(0, dev->iobase + PCI1734_IDO + 2);
outb(0, dev->iobase + PCI1734_IDO + 3);
break;
+ case TYPE_PCI1735:
+ outb(0, dev->iobase + PCI1735_DO); /* clear outputs */
+ outb(0, dev->iobase + PCI1735_DO + 1);
+ outb(0, dev->iobase + PCI1735_DO + 2);
+ outb(0, dev->iobase + PCI1735_DO + 3);
+ i8254_set_mode(dev->iobase + PCI1735_C8254, 0, 0, I8254_MODE0);
+ i8254_set_mode(dev->iobase + PCI1735_C8254, 0, 1, I8254_MODE0);
+ i8254_set_mode(dev->iobase + PCI1735_C8254, 0, 2, I8254_MODE0);
+ break;
case TYPE_PCI1736:
outb(0, dev->iobase + PCI1736_IDO);
@@ -877,6 +995,26 @@
/*
==============================================================================
*/
+static int pci_dio_add_8254(struct comedi_device *dev,
+ struct comedi_subdevice * s,
+ const struct diosubd_data *d, int subdev)
+{
+ s->type = COMEDI_SUBD_COUNTER;
+ s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
+ s->n_chan = d->chans;
+ s->maxdata = 65535;
+ s->len_chanlist = d->chans;
+ s->insn_read = pci_8254_insn_read;
+ s->insn_write = pci_8254_insn_write;
+ s->insn_config = pci_8254_insn_config;
+ s->private = (void *)d;
+
+ return 0;
+}
+
+/*
+==============================================================================
+*/
static int CheckAndAllocCard(struct comedi_device *dev,
struct comedi_devconfig *it,
struct pci_dev *pcidev)
@@ -979,6 +1117,9 @@
n_subdevices += this_board->sdio[i].regs;
if (this_board->boardid.chans)
n_subdevices++;
+ for (i = 0; i < MAX_8254_SUBDEVS; i++)
+ if (this_board->s8254[i].chans)
+ n_subdevices++;
}
ret = alloc_subdevices(dev, n_subdevices);
@@ -1022,6 +1163,13 @@
subdev++;
}
+ for (i = 0; i < MAX_8254_SUBDEVS; i++)
+ if (this_board->s8254[i].chans) {
+ s = dev->subdevices + subdev;
+ pci_dio_add_8254(dev, s, &this_board->s8254[i], subdev);
+ subdev++;
+ }
+
if (this_board->cardtype == TYPE_PCI1760)
pci1760_attach(dev, it);
@@ -1067,6 +1215,16 @@
}
}
+ if (this_board->boardid.chans) {
+ subdev++;
+ }
+
+ for (i = 0; i < MAX_8254_SUBDEVS; i++) {
+ if (this_board->s8254[i].chans) {
+ subdev++;
+ }
+ }
+
for (i = 0; i < dev->n_subdevices; i++) {
s = dev->subdevices + i;
s->private = NULL;
diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c
index 8eb6765..bf27617 100644
--- a/drivers/staging/comedi/drivers/amplc_dio200.c
+++ b/drivers/staging/comedi/drivers/amplc_dio200.c
@@ -460,6 +460,7 @@
int has_clk_gat_sce;
unsigned clock_src[3]; /* Current clock sources */
unsigned gate_src[3]; /* Current gate sources */
+ spinlock_t spinlock;
};
struct dio200_subdev_intr {
@@ -1042,8 +1043,11 @@
{
struct dio200_subdev_8254 *subpriv = s->private;
int chan = CR_CHAN(insn->chanspec);
+ unsigned long flags;
+ spin_lock_irqsave(&subpriv->spinlock, flags);
data[0] = i8254_read(subpriv->iobase, 0, chan);
+ spin_unlock_irqrestore(&subpriv->spinlock, flags);
return 1;
}
@@ -1057,8 +1061,11 @@
{
struct dio200_subdev_8254 *subpriv = s->private;
int chan = CR_CHAN(insn->chanspec);
+ unsigned long flags;
+ spin_lock_irqsave(&subpriv->spinlock, flags);
i8254_write(subpriv->iobase, 0, chan, data[0]);
+ spin_unlock_irqrestore(&subpriv->spinlock, flags);
return 1;
}
@@ -1151,14 +1158,16 @@
struct comedi_insn *insn, unsigned int *data)
{
struct dio200_subdev_8254 *subpriv = s->private;
- int ret;
+ int ret = 0;
int chan = CR_CHAN(insn->chanspec);
+ unsigned long flags;
+ spin_lock_irqsave(&subpriv->spinlock, flags);
switch (data[0]) {
case INSN_CONFIG_SET_COUNTER_MODE:
ret = i8254_set_mode(subpriv->iobase, 0, chan, data[1]);
if (ret < 0)
- return -EINVAL;
+ ret = -EINVAL;
break;
case INSN_CONFIG_8254_READ_STATUS:
data[1] = i8254_status(subpriv->iobase, 0, chan);
@@ -1166,30 +1175,35 @@
case INSN_CONFIG_SET_GATE_SRC:
ret = dio200_set_gate_src(subpriv, chan, data[2]);
if (ret < 0)
- return -EINVAL;
+ ret = -EINVAL;
break;
case INSN_CONFIG_GET_GATE_SRC:
ret = dio200_get_gate_src(subpriv, chan);
- if (ret < 0)
- return -EINVAL;
+ if (ret < 0) {
+ ret = -EINVAL;
+ break;
+ }
data[2] = ret;
break;
case INSN_CONFIG_SET_CLOCK_SRC:
ret = dio200_set_clock_src(subpriv, chan, data[1]);
if (ret < 0)
- return -EINVAL;
+ ret = -EINVAL;
break;
case INSN_CONFIG_GET_CLOCK_SRC:
ret = dio200_get_clock_src(subpriv, chan, &data[2]);
- if (ret < 0)
- return -EINVAL;
+ if (ret < 0) {
+ ret = -EINVAL;
+ break;
+ }
data[1] = ret;
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
break;
}
- return insn->n;
+ spin_unlock_irqrestore(&subpriv->spinlock, flags);
+ return ret < 0 ? ret : insn->n;
}
/*
@@ -1222,6 +1236,7 @@
s->insn_write = dio200_subdev_8254_write;
s->insn_config = dio200_subdev_8254_config;
+ spin_lock_init(&subpriv->spinlock);
subpriv->iobase = offset + iobase;
subpriv->has_clk_gat_sce = has_clk_gat_sce;
if (has_clk_gat_sce) {
diff --git a/drivers/staging/comedi/drivers/cb_pcidda.c b/drivers/staging/comedi/drivers/cb_pcidda.c
index 81829d6..c374bee 100644
--- a/drivers/staging/comedi/drivers/cb_pcidda.c
+++ b/drivers/staging/comedi/drivers/cb_pcidda.c
@@ -52,7 +52,6 @@
#include "8255.h"
#define PCI_VENDOR_ID_CB 0x1307 /* PCI vendor number of ComputerBoards */
-#define N_BOARDS 10 /* Number of boards in cb_pcidda_boards */
#define EEPROM_SIZE 128 /* number of entries in eeprom */
#define MAX_AO_CHANNELS 8 /* maximum number of ao channels for supported boards */
@@ -307,7 +306,7 @@
continue;
}
}
- for (index = 0; index < N_BOARDS; index++) {
+ for (index = 0; index < ARRAY_SIZE(cb_pcidda_boards); index++) {
if (cb_pcidda_boards[index].device_id ==
pcidev->device) {
goto found;
diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c
index cedb02d..3a46f0c 100644
--- a/drivers/staging/comedi/drivers/ni_mio_cs.c
+++ b/drivers/staging/comedi/drivers/ni_mio_cs.c
@@ -123,7 +123,7 @@
.adbits = 12,
.ai_fifo_depth = 1024,
.alwaysdither = 0,
- .gainlkup = ai_gain_16,
+ .gainlkup = ai_gain_4,
.ai_speed = 5000,
.n_aochan = 2,
.aobits = 12,
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 86f035d..27b4cb2 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -351,8 +351,7 @@
int ret = 0;
if (!this_usbduxsub) {
- dev_err(&this_usbduxsub->interface->dev,
- "comedi?: usbdux_ai_stop: this_usbduxsub=NULL!\n");
+ pr_err("comedi?: usbdux_ai_stop: this_usbduxsub=NULL!\n");
return -EFAULT;
}
dev_dbg(&this_usbduxsub->interface->dev, "comedi: usbdux_ai_stop\n");
diff --git a/drivers/staging/dream/synaptics_i2c_rmi.c b/drivers/staging/dream/synaptics_i2c_rmi.c
index 1f020da..3320359 100644
--- a/drivers/staging/dream/synaptics_i2c_rmi.c
+++ b/drivers/staging/dream/synaptics_i2c_rmi.c
@@ -519,7 +519,6 @@
err_input_dev_alloc_failed:
err_detect_failed:
err_power_failed:
- i2c_set_clientdata(client, NULL);
kfree(ts);
err_alloc_data_failed:
err_check_functionality_failed:
@@ -537,7 +536,6 @@
else
hrtimer_cancel(&ts->timer);
input_unregister_device(ts->input_dev);
- i2c_set_clientdata(client, NULL);
kfree(ts);
return 0;
}
diff --git a/drivers/staging/dt3155/allocator.c b/drivers/staging/dt3155/allocator.c
index bd5adbc..d33947b 100644
--- a/drivers/staging/dt3155/allocator.c
+++ b/drivers/staging/dt3155/allocator.c
@@ -176,9 +176,7 @@
prev = ptr; ptr = ptr->next;
if (!ptr) {
- printk(KERN_ERR ALL_MSG
- "free_dma(0x%08lx) but add. not allocated\n",
- ptr->address);
+ pr_err(ALL_MSG "free_dma but add. not allocated\n");
return -EINVAL;
}
PDEBUGG("freeing: %08lx (%li) next %08lx\n", ptr->address, ptr->size,
diff --git a/drivers/staging/go7007/saa7134-go7007.c b/drivers/staging/go7007/saa7134-go7007.c
index 49f0d31..cf7c34a 100644
--- a/drivers/staging/go7007/saa7134-go7007.c
+++ b/drivers/staging/go7007/saa7134-go7007.c
@@ -242,13 +242,13 @@
printk(KERN_DEBUG "saa7134-go7007: irq: lost %ld\n",
(status >> 16) & 0x0f);
if (status & 0x100000) {
- dma_sync_single(&dev->pci->dev,
- saa->bottom_dma, PAGE_SIZE, DMA_FROM_DEVICE);
+ dma_sync_single_for_cpu(&dev->pci->dev,
+ saa->bottom_dma, PAGE_SIZE, DMA_FROM_DEVICE);
go7007_parse_video_stream(go, saa->bottom, PAGE_SIZE);
saa_writel(SAA7134_RS_BA2(5), cpu_to_le32(saa->bottom_dma));
} else {
- dma_sync_single(&dev->pci->dev,
- saa->top_dma, PAGE_SIZE, DMA_FROM_DEVICE);
+ dma_sync_single_for_cpu(&dev->pci->dev,
+ saa->top_dma, PAGE_SIZE, DMA_FROM_DEVICE);
go7007_parse_video_stream(go, saa->top, PAGE_SIZE);
saa_writel(SAA7134_RS_BA1(5), cpu_to_le32(saa->top_dma));
}
diff --git a/drivers/staging/go7007/wis-saa7113.c b/drivers/staging/go7007/wis-saa7113.c
index bd92545..72f5c1f 100644
--- a/drivers/staging/go7007/wis-saa7113.c
+++ b/drivers/staging/go7007/wis-saa7113.c
@@ -289,7 +289,6 @@
if (write_regs(client, initial_registers) < 0) {
printk(KERN_ERR
"wis-saa7113: error initializing SAA7113\n");
- i2c_set_clientdata(client, NULL);
kfree(dec);
return -ENODEV;
}
@@ -301,7 +300,6 @@
{
struct wis_saa7113 *dec = i2c_get_clientdata(client);
- i2c_set_clientdata(client, NULL);
kfree(dec);
return 0;
}
diff --git a/drivers/staging/go7007/wis-saa7115.c b/drivers/staging/go7007/wis-saa7115.c
index b2eb804..cd950b6 100644
--- a/drivers/staging/go7007/wis-saa7115.c
+++ b/drivers/staging/go7007/wis-saa7115.c
@@ -422,7 +422,6 @@
if (write_regs(client, initial_registers) < 0) {
printk(KERN_ERR
"wis-saa7115: error initializing SAA7115\n");
- i2c_set_clientdata(client, NULL);
kfree(dec);
return -ENODEV;
}
@@ -434,7 +433,6 @@
{
struct wis_saa7115 *dec = i2c_get_clientdata(client);
- i2c_set_clientdata(client, NULL);
kfree(dec);
return 0;
}
diff --git a/drivers/staging/go7007/wis-sony-tuner.c b/drivers/staging/go7007/wis-sony-tuner.c
index b101329..981c9b3 100644
--- a/drivers/staging/go7007/wis-sony-tuner.c
+++ b/drivers/staging/go7007/wis-sony-tuner.c
@@ -684,7 +684,6 @@
{
struct wis_sony_tuner *t = i2c_get_clientdata(client);
- i2c_set_clientdata(client, NULL);
kfree(t);
return 0;
}
diff --git a/drivers/staging/go7007/wis-tw2804.c b/drivers/staging/go7007/wis-tw2804.c
index 315268d..ee28a99 100644
--- a/drivers/staging/go7007/wis-tw2804.c
+++ b/drivers/staging/go7007/wis-tw2804.c
@@ -323,7 +323,6 @@
{
struct wis_tw2804 *dec = i2c_get_clientdata(client);
- i2c_set_clientdata(client, NULL);
kfree(dec);
return 0;
}
diff --git a/drivers/staging/go7007/wis-tw9903.c b/drivers/staging/go7007/wis-tw9903.c
index 2afea09..80d4726 100644
--- a/drivers/staging/go7007/wis-tw9903.c
+++ b/drivers/staging/go7007/wis-tw9903.c
@@ -294,7 +294,6 @@
if (write_regs(client, initial_registers) < 0) {
printk(KERN_ERR "wis-tw9903: error initializing TW9903\n");
- i2c_set_clientdata(client, NULL);
kfree(dec);
return -ENODEV;
}
@@ -306,7 +305,6 @@
{
struct wis_tw9903 *dec = i2c_get_clientdata(client);
- i2c_set_clientdata(client, NULL);
kfree(dec);
return 0;
}
diff --git a/drivers/staging/hv/channel_mgmt.c b/drivers/staging/hv/channel_mgmt.c
index 3f53b4d..12db555 100644
--- a/drivers/staging/hv/channel_mgmt.c
+++ b/drivers/staging/hv/channel_mgmt.c
@@ -23,6 +23,7 @@
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/completion.h>
#include "osd.h"
#include "logging.h"
#include "vmbus_private.h"
@@ -293,6 +294,25 @@
Channel);
}
+
+DECLARE_COMPLETION(hv_channel_ready);
+
+/*
+ * Count initialized channels, and ensure all channels are ready when hv_vmbus
+ * module loading completes.
+ */
+static void count_hv_channel(void)
+{
+ static int counter;
+ unsigned long flags;
+
+ spin_lock_irqsave(&gVmbusConnection.channel_lock, flags);
+ if (++counter == MAX_MSG_TYPES)
+ complete(&hv_channel_ready);
+ spin_unlock_irqrestore(&gVmbusConnection.channel_lock, flags);
+}
+
+
/*
* VmbusChannelProcessOffer - Process the offer by creating a channel/device
* associated with this offer
@@ -373,22 +393,21 @@
* can cleanup properly
*/
newChannel->State = CHANNEL_OPEN_STATE;
- cnt = 0;
- while (cnt != MAX_MSG_TYPES) {
+ /* Open IC channels */
+ for (cnt = 0; cnt < MAX_MSG_TYPES; cnt++) {
if (memcmp(&newChannel->OfferMsg.Offer.InterfaceType,
&hv_cb_utils[cnt].data,
- sizeof(struct hv_guid)) == 0) {
+ sizeof(struct hv_guid)) == 0 &&
+ VmbusChannelOpen(newChannel, 2 * PAGE_SIZE,
+ 2 * PAGE_SIZE, NULL, 0,
+ hv_cb_utils[cnt].callback,
+ newChannel) == 0) {
+ hv_cb_utils[cnt].channel = newChannel;
DPRINT_INFO(VMBUS, "%s",
- hv_cb_utils[cnt].log_msg);
-
- if (VmbusChannelOpen(newChannel, 2 * PAGE_SIZE,
- 2 * PAGE_SIZE, NULL, 0,
- hv_cb_utils[cnt].callback,
- newChannel) == 0)
- hv_cb_utils[cnt].channel = newChannel;
+ hv_cb_utils[cnt].log_msg);
+ count_hv_channel();
}
- cnt++;
}
}
DPRINT_EXIT(VMBUS);
diff --git a/drivers/staging/hv/hv_utils.c b/drivers/staging/hv/hv_utils.c
index 8a49aaf..2adc9b4 100644
--- a/drivers/staging/hv/hv_utils.c
+++ b/drivers/staging/hv/hv_utils.c
@@ -24,6 +24,8 @@
#include <linux/slab.h>
#include <linux/sysctl.h>
#include <linux/reboot.h>
+#include <linux/dmi.h>
+#include <linux/pci.h>
#include "logging.h"
#include "osd.h"
@@ -251,10 +253,36 @@
DPRINT_EXIT(VMBUS);
}
+static const struct pci_device_id __initconst
+hv_utils_pci_table[] __maybe_unused = {
+ { PCI_DEVICE(0x1414, 0x5353) }, /* Hyper-V emulated VGA controller */
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, hv_utils_pci_table);
+
+
+static const struct dmi_system_id __initconst
+hv_utils_dmi_table[] __maybe_unused = {
+ {
+ .ident = "Hyper-V",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"),
+ DMI_MATCH(DMI_BOARD_NAME, "Virtual Machine"),
+ },
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(dmi, hv_utils_dmi_table);
+
+
static int __init init_hyperv_utils(void)
{
printk(KERN_INFO "Registering HyperV Utility Driver\n");
+ if (!dmi_check_system(hv_utils_dmi_table))
+ return -ENODEV;
+
hv_cb_utils[HV_SHUTDOWN_MSG].channel->OnChannelCallback =
&shutdown_onchannelcallback;
hv_cb_utils[HV_SHUTDOWN_MSG].callback = &shutdown_onchannelcallback;
diff --git a/drivers/staging/hv/vmbus.h b/drivers/staging/hv/vmbus.h
index 0c6ee0f..3c14b29 100644
--- a/drivers/staging/hv/vmbus.h
+++ b/drivers/staging/hv/vmbus.h
@@ -74,4 +74,6 @@
void vmbus_child_driver_unregister(struct driver_context *driver_ctx);
void vmbus_get_interface(struct vmbus_channel_interface *interface);
+extern struct completion hv_channel_ready;
+
#endif /* _VMBUS_H_ */
diff --git a/drivers/staging/hv/vmbus_drv.c b/drivers/staging/hv/vmbus_drv.c
index c21731a..22c80ec 100644
--- a/drivers/staging/hv/vmbus_drv.c
+++ b/drivers/staging/hv/vmbus_drv.c
@@ -27,6 +27,7 @@
#include <linux/pci.h>
#include <linux/dmi.h>
#include <linux/slab.h>
+#include <linux/completion.h>
#include "version_info.h"
#include "osd.h"
#include "logging.h"
@@ -356,6 +357,8 @@
vmbus_drv_obj->GetChannelOffers();
+ wait_for_completion(&hv_channel_ready);
+
cleanup:
DPRINT_EXIT(VMBUS_DRV);
diff --git a/drivers/staging/iio/Documentation/iio_utils.h b/drivers/staging/iio/Documentation/iio_utils.h
index a4555e6..014f668 100644
--- a/drivers/staging/iio/Documentation/iio_utils.h
+++ b/drivers/staging/iio/Documentation/iio_utils.h
@@ -62,9 +62,8 @@
1) != 0) {
filename = malloc(strlen(iio_dir)
+ strlen(type)
- + 1
+ numstrlen
- + 1);
+ + 6);
if (filename == NULL)
return -ENOMEM;
sprintf(filename, "%s%s%d/name",
diff --git a/drivers/staging/iio/adc/max1363_core.c b/drivers/staging/iio/adc/max1363_core.c
index 20e2674..905f856 100644
--- a/drivers/staging/iio/adc/max1363_core.c
+++ b/drivers/staging/iio/adc/max1363_core.c
@@ -1011,7 +1011,6 @@
if (!IS_ERR(st->reg))
regulator_put(st->reg);
error_free_st:
- i2c_set_clientdata(client, NULL);
kfree(st);
error_ret:
@@ -1030,7 +1029,6 @@
regulator_disable(st->reg);
regulator_put(st->reg);
}
- i2c_set_clientdata(client, NULL);
kfree(st);
return 0;
diff --git a/drivers/staging/iio/light/tsl2563.c b/drivers/staging/iio/light/tsl2563.c
index 43aaacf..e4b0a5e 100644
--- a/drivers/staging/iio/light/tsl2563.c
+++ b/drivers/staging/iio/light/tsl2563.c
@@ -694,7 +694,6 @@
fail2:
iio_device_unregister(chip->indio_dev);
fail1:
- i2c_set_clientdata(client, NULL);
kfree(chip);
return err;
}
@@ -705,7 +704,6 @@
iio_device_unregister(chip->indio_dev);
- i2c_set_clientdata(client, NULL);
kfree(chip);
return 0;
}
diff --git a/drivers/staging/iio/ring_sw.c b/drivers/staging/iio/ring_sw.c
index 1f14cd4..294272d 100644
--- a/drivers/staging/iio/ring_sw.c
+++ b/drivers/staging/iio/ring_sw.c
@@ -20,7 +20,7 @@
if ((length == 0) || (bytes_per_datum == 0))
return -EINVAL;
__iio_update_ring_buffer(&ring->buf, bytes_per_datum, length);
- ring->data = kmalloc(length*ring->buf.bpd, GFP_KERNEL);
+ ring->data = kmalloc(length*ring->buf.bpd, GFP_ATOMIC);
ring->read_p = NULL;
ring->write_p = NULL;
ring->last_written_p = NULL;
diff --git a/drivers/staging/mrst-touchscreen/Kconfig b/drivers/staging/mrst-touchscreen/Kconfig
new file mode 100644
index 0000000..c2af492
--- /dev/null
+++ b/drivers/staging/mrst-touchscreen/Kconfig
@@ -0,0 +1,7 @@
+config TOUCHSCREEN_INTEL_MID
+ tristate "Intel MID platform resistive touchscreen"
+ depends on INTEL_SCU_IPC
+ default y
+ help
+ Say Y here if you have a Intel MID based touchscreen
+ If unsure, say N.
diff --git a/drivers/staging/mrst-touchscreen/Makefile b/drivers/staging/mrst-touchscreen/Makefile
new file mode 100644
index 0000000..2d638b0
--- /dev/null
+++ b/drivers/staging/mrst-touchscreen/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) := intel_mid_touch.o
+
+
diff --git a/drivers/staging/mrst-touchscreen/TODO b/drivers/staging/mrst-touchscreen/TODO
new file mode 100644
index 0000000..7157028
--- /dev/null
+++ b/drivers/staging/mrst-touchscreen/TODO
@@ -0,0 +1,2 @@
+- Move the driver to not think it is SPI (requires fixing some of the SFI
+ and firmware side)
diff --git a/drivers/staging/mrst-touchscreen/intel-mid-touch.c b/drivers/staging/mrst-touchscreen/intel-mid-touch.c
new file mode 100644
index 0000000..abba22f
--- /dev/null
+++ b/drivers/staging/mrst-touchscreen/intel-mid-touch.c
@@ -0,0 +1,864 @@
+/*
+ * intel_mid_touch.c - Intel MID Resistive Touch Screen Driver
+ *
+ * Copyright (C) 2008 Intel Corp
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; ifnot, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Questions/Comments/Bug fixes to Sreedhara (sreedhara.ds@intel.com)
+ * Ramesh Agarwal (ramesh.agarwal@intel.com)
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * TODO:
+ * kill off mrstouch_debug eventually
+ * review conversion of r/m/w sequences
+ * Replace interrupt mutex abuse
+ * Kill of mrstouchdevp pointer
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/param.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <asm/intel_scu_ipc.h>
+
+
+#if defined(MRSTOUCH_DEBUG)
+#define mrstouch_debug(fmt, args...)\
+ do { \
+ printk(KERN_DEBUG "\n[MRSTOUCH(%d)] - ", __LINE__); \
+ printk(KERN_DEBUG fmt, ##args); \
+ } while (0);
+#else
+#define mrstouch_debug(fmt, args...)
+#endif
+
+/* PMIC Interrupt registers */
+#define PMIC_REG_ID1 0x00 /*PMIC ID1 register */
+
+/* PMIC Interrupt registers */
+#define PMIC_REG_INT 0x04 /*PMIC interrupt register */
+#define PMIC_REG_MINT 0x05 /*PMIC interrupt mask register */
+
+/* ADC Interrupt registers */
+#define PMIC_REG_ADCINT 0x5F /*ADC interrupt register */
+#define PMIC_REG_MADCINT 0x60 /*ADC interrupt mask register */
+
+/* ADC Control registers */
+#define PMIC_REG_ADCCNTL1 0x61 /*ADC control register */
+
+/* ADC Channel Selection registers */
+#define PMICADDR0 0xA4
+#define END_OF_CHANNEL 0x1F
+
+/* ADC Result register */
+#define PMIC_REG_ADCSNS0H 0x64
+
+/* ADC channels for touch screen */
+#define MRST_TS_CHAN10 0xA /* Touch screen X+ connection */
+#define MRST_TS_CHAN11 0xB /* Touch screen X- connection */
+#define MRST_TS_CHAN12 0xC /* Touch screen Y+ connection */
+#define MRST_TS_CHAN13 0xD /* Touch screen Y- connection */
+
+/* Touch screen coordinate constants */
+#define TOUCH_PRESSURE 50
+#define TOUCH_PRESSURE_FS 100
+
+#define XMOVE_LIMIT 5
+#define YMOVE_LIMIT 5
+#define XYMOVE_CNT 3
+
+#define MAX_10BIT ((1<<10)-1)
+
+/* Touch screen channel BIAS constants */
+#define XBIAS 0x20
+#define YBIAS 0x40
+#define ZBIAS 0x80
+
+/* Touch screen coordinates */
+#define MIN_X 10
+#define MAX_X 1024
+#define MIN_Y 10
+#define MAX_Y 1024
+#define WAIT_ADC_COMPLETION 10
+
+/* PMIC ADC round robin delays */
+#define ADC_LOOP_DELAY0 0x0 /* Continuous loop */
+#define ADC_LOOP_DELAY1 0x1 /* 4.5 ms approximate */
+
+/* PMIC Vendor Identifiers */
+#define PMIC_VENDOR_FS 0 /* PMIC vendor FreeScale */
+#define PMIC_VENDOR_MAXIM 1 /* PMIC vendor MAXIM */
+#define PMIC_VENDOR_NEC 2 /* PMIC vendor NEC */
+#define MRSTOUCH_MAX_CHANNELS 32 /* Maximum ADC channels */
+
+/* Touch screen device structure */
+struct mrstouch_dev {
+ struct spi_device *spi; /* SPI device associated with touch screen */
+ struct input_dev *input; /* input device for touchscreen*/
+ char phys[32]; /* Device name */
+ struct task_struct *pendet_thrd; /* PENDET interrupt handler */
+ struct mutex lock; /* Sync between interrupt and PENDET handler */
+ bool busy; /* Busy flag */
+ u16 asr; /* Address selection register */
+ int irq; /* Touch screen IRQ # */
+ uint vendor; /* PMIC vendor */
+ uint rev; /* PMIC revision */
+ bool suspended; /* Device suspended status */
+ bool disabled; /* Device disabled status */
+ u16 x; /* X coordinate */
+ u16 y; /* Y coordinate */
+ bool pendown; /* PEN position */
+} ;
+
+
+/* Global Pointer to Touch screen device */
+static struct mrstouch_dev *mrstouchdevp;
+
+/* Utility to read PMIC ID */
+static int mrstouch_pmic_id(uint *vendor, uint *rev)
+{
+ int err;
+ u8 r;
+
+ err = intel_scu_ipc_ioread8(PMIC_REG_ID1, &r);
+ if (err)
+ return err;
+
+ *vendor = r & 0x7;
+ *rev = (r >> 3) & 0x7;
+
+ return 0;
+}
+
+/*
+ * Parse ADC channels to find end of the channel configured by other ADC user
+ * NEC and MAXIM requires 4 channels and FreeScale needs 18 channels
+ */
+static int mrstouch_chan_parse(struct mrstouch_dev *tsdev)
+{
+ int err, i, j, found;
+ u32 r32;
+
+ found = -1;
+
+ for (i = 0; i < MRSTOUCH_MAX_CHANNELS; i++) {
+ if (found >= 0)
+ break;
+
+ err = intel_scu_ipc_ioread32(PMICADDR0, &r32);
+ if (err)
+ return err;
+
+ for (j = 0; j < 32; j+= 8) {
+ if (((r32 >> j) & 0xFF) == END_OF_CHANNEL) {
+ found = i;
+ break;
+ }
+ }
+ }
+ if (found < 0)
+ return 0;
+
+ if (tsdev->vendor == PMIC_VENDOR_FS) {
+ if (found && found > (MRSTOUCH_MAX_CHANNELS - 18))
+ return -ENOSPC;
+ } else {
+ if (found && found > (MRSTOUCH_MAX_CHANNELS - 4))
+ return -ENOSPC;
+ }
+ return found;
+}
+
+/* Utility to enable/disable pendet.
+ * pendet set to true enables PENDET interrupt
+ * pendet set to false disables PENDET interrupt
+ * Also clears RND mask bit
+*/
+static int pendet_enable(struct mrstouch_dev *tsdev, bool pendet)
+{
+ u16 reg;
+ u8 r;
+ u8 pendet_enabled = 0;
+ int retry = 0;
+ int err;
+
+ err = intel_scu_ipc_ioread16(PMIC_REG_MADCINT, ®);
+ if (err)
+ return err;
+
+ if (pendet) {
+ reg &= ~0x0005;
+ reg |= 0x2000; /* Enable pendet */
+ } else
+ reg &= 0xDFFF; /* Disable pendet */
+
+ /* Set MADCINT and update ADCCNTL1 (next reg byte) */
+ err = intel_scu_ipc_iowrite16(PMIC_REG_MADCINT, reg);
+ if (!pendet || err)
+ return err;
+
+ /*
+ * Sometimes even after the register write succeeds
+ * the PMIC register value is not updated. Retry few iterations
+ * to enable pendet.
+ */
+
+ err = intel_scu_ipc_ioread8(PMIC_REG_ADCCNTL1, &r);
+ pendet_enabled = (r >> 5) & 0x01;
+
+ retry = 0;
+ while (!err && !pendet_enabled) {
+ retry++;
+ msleep(10);
+ err = intel_scu_ipc_iowrite8(PMIC_REG_ADCCNTL1, reg >> 8);
+ if (err)
+ break;
+ err = intel_scu_ipc_ioread8(PMIC_REG_ADCCNTL1, &r);
+ if (err == 0)
+ pendet_enabled = (r >> 5) & 0x01;
+ if (retry >= 10) {
+ dev_err(&tsdev->spi->dev, "Touch screen disabled.\n");
+ return -EIO;
+ }
+ }
+ return 0;
+}
+
+/* To read PMIC ADC touch screen result
+ * Reads ADC storage registers for higher 7 and lower 3 bits
+ * converts the two readings to single value and turns off gain bit
+ */
+static int mrstouch_ts_chan_read(u16 offset, u16 chan, u16 *vp, u16 *vm)
+{
+ int err;
+ u16 result;
+ u32 res;
+
+ result = PMIC_REG_ADCSNS0H + offset;
+
+ if (chan == MRST_TS_CHAN12)
+ result += 4;
+
+ err = intel_scu_ipc_ioread32(result, &res);
+ if (err)
+ return err;
+
+ /* Mash the bits up */
+
+ *vp = (res & 0xFF) << 3; /* Highest 7 bits */
+ *vp |= (res >> 8) & 0x07; /* Lower 3 bits */
+ *vp &= 0x3FF;
+
+ res >>= 16;
+
+ *vm = (res & 0xFF) << 3; /* Highest 7 bits */
+ *vm |= (res >> 8) & 0x07; /* Lower 3 bits */
+ *vm &= 0x3FF;
+
+ return 0;
+}
+
+/* To configure touch screen channels
+ * Writes touch screen channels to ADC address selection registers
+ */
+static int mrstouch_ts_chan_set(uint offset)
+{
+ int count;
+ u16 chan;
+ u16 reg[5];
+ u8 data[5];
+
+ chan = PMICADDR0 + offset;
+ for (count = 0; count <= 3; count++) {
+ reg[count] = chan++;
+ data[count] = MRST_TS_CHAN10 + count;
+ }
+ reg[count] = chan;
+ data[count] = END_OF_CHANNEL;
+
+ return intel_scu_ipc_writev(reg, data, 5);
+}
+
+/* Initialize ADC */
+static int mrstouch_adc_init(struct mrstouch_dev *tsdev)
+{
+ int err, start;
+ u8 ra, rm;
+
+ err = mrstouch_pmic_id(&tsdev->vendor, &tsdev->rev);
+ if (err) {
+ dev_err(&tsdev->spi->dev, "Unable to read PMIC id\n");
+ return err;
+ }
+
+ start = mrstouch_chan_parse(tsdev);
+ if (start < 0) {
+ dev_err(&tsdev->spi->dev, "Unable to parse channels\n");
+ return start;
+ }
+
+ tsdev->asr = start;
+
+ mrstouch_debug("Channel offset(%d): 0x%X\n", tsdev->asr, tsdev->vendor);
+
+ /* ADC power on, start, enable PENDET and set loop delay
+ * ADC loop delay is set to 4.5 ms approximately
+ * Loop delay more than this results in jitter in adc readings
+ * Setting loop delay to 0 (continous loop) in MAXIM stops PENDET
+ * interrupt generation sometimes.
+ */
+
+ if (tsdev->vendor == PMIC_VENDOR_FS) {
+ ra = 0xE0 | ADC_LOOP_DELAY0;
+ rm = 0x5;
+ } else {
+ /* NEC and MAXIm not consistent with loop delay 0 */
+ ra = 0xE0 | ADC_LOOP_DELAY1;
+ rm = 0x0;
+
+ /* configure touch screen channels */
+ err = mrstouch_ts_chan_set(tsdev->asr);
+ if (err)
+ return err;
+ }
+ err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, ra, 0xE7);
+ if (err == 0)
+ err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, rm, 0x03);
+ return err;
+}
+
+/* Reports x,y coordinates to event subsystem */
+static void mrstouch_report_xy(struct mrstouch_dev *tsdev, u16 x, u16 y, u16 z)
+{
+ int xdiff, ydiff;
+
+ if (tsdev->pendown && z <= TOUCH_PRESSURE) {
+ /* Pen removed, report button release */
+ mrstouch_debug("BTN REL(%d)", z);
+ input_report_key(tsdev->input, BTN_TOUCH, 0);
+ tsdev->pendown = false;
+ }
+
+ xdiff = abs(x - tsdev->x);
+ ydiff = abs(y - tsdev->y);
+
+ /*
+ if x and y values changes for XYMOVE_CNT readings it is considered
+ as stylus is moving. This is required to differentiate between stylus
+ movement and jitter
+ */
+ if (x < MIN_X || x > MAX_X || y < MIN_Y || y > MAX_Y) {
+ /* Spurious values, release button if touched and return */
+ if (tsdev->pendown) {
+ mrstouch_debug("BTN REL(%d)", z);
+ input_report_key(tsdev->input, BTN_TOUCH, 0);
+ tsdev->pendown = false;
+ }
+ return;
+ } else if (xdiff >= XMOVE_LIMIT || ydiff >= YMOVE_LIMIT) {
+ tsdev->x = x;
+ tsdev->y = y;
+
+ input_report_abs(tsdev->input, ABS_X, x);
+ input_report_abs(tsdev->input, ABS_Y, y);
+ input_sync(tsdev->input);
+ }
+
+
+ if (!tsdev->pendown && z > TOUCH_PRESSURE) {
+ /* Pen touched, report button touch */
+ mrstouch_debug("BTN TCH(%d, %d, %d)", x, y, z);
+ input_report_key(tsdev->input, BTN_TOUCH, 1);
+ tsdev->pendown = true;
+ }
+}
+
+
+/* Utility to start ADC, used by freescale handler */
+static int pendet_mask(void)
+{
+ return intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x02, 0x02);
+}
+
+/* Utility to stop ADC, used by freescale handler */
+static int pendet_umask(void)
+{
+ return intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x00, 0x02);
+}
+
+/* Utility to read ADC, used by freescale handler */
+static int mrstouch_pmic_fs_adc_read(struct mrstouch_dev *tsdev)
+{
+ int err;
+ u16 x, y, z, result;
+ u16 reg[4];
+ u8 data[4];
+
+ result = PMIC_REG_ADCSNS0H + tsdev->asr;
+
+ reg[0] = result + 4;
+ reg[1] = result + 5;
+ reg[2] = result + 16;
+ reg[3] = result + 17;
+
+ err = intel_scu_ipc_readv(reg, data, 4);
+ if (err)
+ goto ipc_error;
+
+ x = data[0] << 3; /* Higher 7 bits */
+ x |= data[1] & 0x7; /* Lower 3 bits */
+ x &= 0x3FF;
+
+ y = data[2] << 3; /* Higher 7 bits */
+ y |= data[3] & 0x7; /* Lower 3 bits */
+ y &= 0x3FF;
+
+ /* Read Z value */
+ reg[0] = result + 28;
+ reg[1] = result + 29;
+
+ err = intel_scu_ipc_readv(reg, data, 4);
+ if (err)
+ goto ipc_error;
+
+ z = data[0] << 3; /* Higher 7 bits */
+ z |= data[1] & 0x7; /* Lower 3 bits */
+ z &= 0x3FF;
+
+#if defined(MRSTOUCH_PRINT_XYZP)
+ mrstouch_debug("X: %d, Y: %d, Z: %d", x, y, z);
+#endif
+
+ if (z >= TOUCH_PRESSURE_FS) {
+ mrstouch_report_xy(tsdev, x, y, TOUCH_PRESSURE - 1); /* Pen Removed */
+ return TOUCH_PRESSURE - 1;
+ } else {
+ mrstouch_report_xy(tsdev, x, y, TOUCH_PRESSURE + 1); /* Pen Touched */
+ return TOUCH_PRESSURE + 1;
+ }
+
+ return 0;
+
+ipc_error:
+ dev_err(&tsdev->spi->dev, "ipc error during fs_adc read\n");
+ return err;
+}
+
+/* To handle free scale pmic pendet interrupt */
+static int pmic0_pendet(void *dev_id)
+{
+ int err, count;
+ u16 chan;
+ unsigned int touched;
+ struct mrstouch_dev *tsdev = (struct mrstouch_dev *)dev_id;
+ u16 reg[5];
+ u8 data[5];
+
+ chan = PMICADDR0 + tsdev->asr;
+
+ /* Set X BIAS */
+ for (count = 0; count <= 3; count++) {
+ reg[count] = chan++;
+ data[count] = 0x2A;
+ }
+ reg[count] = chan++; /* Dummy */
+ data[count] = 0;
+
+ err = intel_scu_ipc_writev(reg, data, 5);
+ if (err)
+ goto ipc_error;
+
+ msleep(WAIT_ADC_COMPLETION);
+
+ /* Set Y BIAS */
+ for (count = 0; count <= 3; count++) {
+ reg[count] = chan++;
+ data[count] = 0x4A;
+ }
+ reg[count] = chan++; /* Dummy */
+ data[count] = 0;
+
+ err = intel_scu_ipc_writev(reg, data, 5);
+ if (err)
+ goto ipc_error;
+
+ msleep(WAIT_ADC_COMPLETION);
+
+ /* Set Z BIAS */
+ err = intel_scu_ipc_iowrite32(chan + 2, 0x8A8A8A8A);
+ if (err)
+ goto ipc_error;
+
+ msleep(WAIT_ADC_COMPLETION);
+
+ /*Read touch screen channels till pen removed
+ * Freescale reports constant value of z for all points
+ * z is high when screen is not touched and low when touched
+ * Map high z value to not touched and low z value to pen touched
+ */
+ touched = mrstouch_pmic_fs_adc_read(tsdev);
+ while (touched > TOUCH_PRESSURE) {
+ touched = mrstouch_pmic_fs_adc_read(tsdev);
+ msleep(WAIT_ADC_COMPLETION);
+ }
+
+ /* Clear all TS channels */
+ chan = PMICADDR0 + tsdev->asr;
+ for (count = 0; count <= 4; count++) {
+ reg[count] = chan++;
+ data[count] = 0;
+ }
+ err = intel_scu_ipc_writev(reg, data, 5);
+ if (err)
+ goto ipc_error;
+
+ for (count = 0; count <= 4; count++) {
+ reg[count] = chan++;
+ data[count] = 0;
+ }
+ err = intel_scu_ipc_writev(reg, data, 5);
+ if (err)
+ goto ipc_error;
+
+ err = intel_scu_ipc_iowrite32(chan + 2, 0x00000000);
+ if (err)
+ goto ipc_error;
+
+ return 0;
+
+ipc_error:
+ dev_err(&tsdev->spi->dev, "ipc error during pendet\n");
+ return err;
+}
+
+
+/* To enable X, Y and Z bias values
+ * Enables YPYM for X channels and XPXM for Y channels
+ */
+static int mrstouch_ts_bias_set(uint offset, uint bias)
+{
+ int count;
+ u16 chan, start;
+ u16 reg[4];
+ u8 data[4];
+
+ chan = PMICADDR0 + offset;
+ start = MRST_TS_CHAN10;
+
+ for (count = 0; count <= 3; count++) {
+ reg[count] = chan++;
+ data[count] = bias | (start + count);
+ }
+ return intel_scu_ipc_writev(reg, data, 4);
+}
+
+/* To read touch screen channel values */
+static int mrstouch_adc_read(struct mrstouch_dev *tsdev)
+{
+ int err;
+ u16 xp, xm, yp, ym, zp, zm;
+
+ /* configure Y bias for X channels */
+ err = mrstouch_ts_bias_set(tsdev->asr, YBIAS);
+ if (err)
+ goto ipc_error;
+
+ msleep(WAIT_ADC_COMPLETION);
+
+ /* read x+ and x- channels */
+ err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, &xp, &xm);
+ if (err)
+ goto ipc_error;
+
+ /* configure x bias for y channels */
+ err = mrstouch_ts_bias_set(tsdev->asr, XBIAS);
+ if (err)
+ goto ipc_error;
+
+ msleep(WAIT_ADC_COMPLETION);
+
+ /* read y+ and y- channels */
+ err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN12, &yp, &ym);
+ if (err)
+ goto ipc_error;
+
+ /* configure z bias for x and y channels */
+ err = mrstouch_ts_bias_set(tsdev->asr, ZBIAS);
+ if (err)
+ goto ipc_error;
+
+ msleep(WAIT_ADC_COMPLETION);
+
+ /* read z+ and z- channels */
+ err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, &zp, &zm);
+ if (err)
+ goto ipc_error;
+
+#if defined(MRSTOUCH_PRINT_XYZP)
+ printk(KERN_INFO "X+: %d, Y+: %d, Z+: %d\n", xp, yp, zp);
+#endif
+
+#if defined(MRSTOUCH_PRINT_XYZM)
+ printk(KERN_INFO "X-: %d, Y-: %d, Z-: %d\n", xm, ym, zm);
+#endif
+
+ mrstouch_report_xy(tsdev, xp, yp, zp); /* report x and y to eventX */
+
+ return zp;
+
+ipc_error:
+ dev_err(&tsdev->spi->dev, "ipc error during adc read\n");
+ return err;
+}
+
+/* PENDET interrupt handler function for NEC and MAXIM */
+static void pmic12_pendet(void *data)
+{
+ unsigned int touched;
+ struct mrstouch_dev *tsdev = (struct mrstouch_dev *)data;
+
+ /* read touch screen channels till pen removed */
+ do {
+ touched = mrstouch_adc_read(tsdev);
+ } while (touched > TOUCH_PRESSURE);
+}
+
+/* Handler to process PENDET interrupt */
+int mrstouch_pendet(void *data)
+{
+ struct mrstouch_dev *tsdev = (struct mrstouch_dev *)data;
+ while (1) {
+ /* Wait for PENDET interrupt */
+ if (mutex_lock_interruptible(&tsdev->lock)) {
+ msleep(WAIT_ADC_COMPLETION);
+ continue;
+ }
+
+ if (tsdev->busy)
+ return 0;
+
+ tsdev->busy = true;
+
+ if (tsdev->vendor == PMIC_VENDOR_NEC ||
+ tsdev->vendor == PMIC_VENDOR_MAXIM) {
+ /* PENDET must be disabled in NEC before reading ADC */
+ pendet_enable(tsdev,false); /* Disbale PENDET */
+ pmic12_pendet(tsdev);
+ pendet_enable(tsdev, true); /*Enable PENDET */
+ } else if (tsdev->vendor == PMIC_VENDOR_FS) {
+ pendet_umask(); /* Stop ADC */
+ pmic0_pendet(tsdev);
+ pendet_mask(); /* Stop ADC */
+ } else
+ dev_err(&tsdev->spi->dev, "Unsupported touchscreen: %d\n",
+ tsdev->vendor);
+
+ tsdev->busy = false;
+
+ }
+ return 0;
+}
+
+/* PENDET interrupt handler */
+static irqreturn_t pendet_intr_handler(int irq, void *handle)
+{
+ struct mrstouch_dev *tsdev = (struct mrstouch_dev *)handle;
+
+ mutex_unlock(&tsdev->lock);
+ return IRQ_HANDLED;
+}
+
+/* Intializes input device and registers with input subsystem */
+static int ts_input_dev_init(struct mrstouch_dev *tsdev, struct spi_device *spi)
+{
+ int err = 0;
+
+ mrstouch_debug("%s", __func__);
+
+ tsdev->input = input_allocate_device();
+ if (!tsdev->input) {
+ dev_err(&tsdev->spi->dev, "Unable to allocate input device.\n");
+ return -EINVAL;
+ }
+
+ tsdev->input->name = "mrst_touchscreen";
+ snprintf(tsdev->phys, sizeof(tsdev->phys),
+ "%s/input0", dev_name(&spi->dev));
+ tsdev->input->phys = tsdev->phys;
+ tsdev->input->dev.parent = &spi->dev;
+
+ tsdev->input->id.vendor = tsdev->vendor;
+ tsdev->input->id.version = tsdev->rev;
+
+ tsdev->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ tsdev->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+ input_set_abs_params(tsdev->input, ABS_X, MIN_X, MIN_Y, 0, 0);
+ input_set_abs_params(tsdev->input, ABS_Y, MIN_X, MIN_Y, 0, 0);
+
+ err = input_register_device(tsdev->input);
+ if (err) {
+ dev_err(&tsdev->spi->dev, "unable to register input device\n");
+ input_free_device(tsdev->input);
+ return err;
+ }
+
+ mrstouch_debug("%s", "mrstouch initialized");
+
+ return 0;
+
+}
+
+/* Probe function for touch screen driver */
+static int __devinit mrstouch_probe(struct spi_device *mrstouch_spi)
+{
+ int err;
+ unsigned int myirq;
+ struct mrstouch_dev *tsdev;
+
+ mrstouch_debug("%s(%p)", __func__, mrstouch_spi);
+
+ mrstouchdevp = NULL;
+ myirq = mrstouch_spi->irq;
+
+ if (!mrstouch_spi->irq) {
+ dev_err(&mrstouch_spi->dev, "no interrupt assigned\n");
+ return -EINVAL;
+ }
+
+ tsdev = kzalloc(sizeof(struct mrstouch_dev), GFP_KERNEL);
+ if (!tsdev) {
+ dev_err(&mrstouch_spi->dev, "unable to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ tsdev->irq = myirq;
+ mrstouchdevp = tsdev;
+
+ err = mrstouch_adc_init(tsdev);
+ if (err) {
+ dev_err(&mrstouch_spi->dev, "ADC init failed\n");
+ goto mrstouch_err_free_mem;
+ }
+
+ dev_set_drvdata(&mrstouch_spi->dev, tsdev);
+ tsdev->spi = mrstouch_spi;
+
+ err = ts_input_dev_init(tsdev, mrstouch_spi);
+ if (err) {
+ dev_err(&tsdev->spi->dev, "ts_input_dev_init failed");
+ goto mrstouch_err_free_mem;
+ }
+
+ mutex_init(&tsdev->lock);
+ mutex_lock(&tsdev->lock)
+
+ mrstouch_debug("Requesting IRQ-%d", myirq);
+ err = request_irq(myirq, pendet_intr_handler,
+ 0, "mrstouch", tsdev);
+ if (err) {
+ dev_err(&tsdev->spi->dev, "unable to allocate irq\n");
+ goto mrstouch_err_free_mem;
+ }
+
+ tsdev->pendet_thrd = kthread_run(mrstouch_pendet,
+ (void *)tsdev, "pendet handler");
+ if (IS_ERR(tsdev->pendet_thrd)) {
+ dev_err(&tsdev->spi->dev, "kthread_run failed\n");
+ err = PTR_ERR(tsdev->pendet_thrd);
+ goto mrstouch_err_free_mem;
+ }
+ mrstouch_debug("%s", "Driver initialized");
+ return 0;
+
+mrstouch_err_free_mem:
+ kfree(tsdev);
+ return err;
+}
+
+static int mrstouch_suspend(struct spi_device *spi, pm_message_t msg)
+{
+ mrstouch_debug("%s", __func__);
+ mrstouchdevp->suspended = 1;
+ return 0;
+}
+
+static int mrstouch_resume(struct spi_device *spi)
+{
+ mrstouch_debug("%s", __func__);
+ mrstouchdevp->suspended = 0;
+ return 0;
+}
+
+static int mrstouch_remove(struct spi_device *spi)
+{
+ mrstouch_debug("%s", __func__);
+ free_irq(mrstouchdevp->irq, mrstouchdevp);
+ input_unregister_device(mrstouchdevp->input);
+ input_free_device(mrstouchdevp->input);
+ if (mrstouchdevp->pendet_thrd)
+ kthread_stop(mrstouchdevp->pendet_thrd);
+ kfree(mrstouchdevp);
+ return 0;
+}
+
+static struct spi_driver mrstouch_driver = {
+ .driver = {
+ .name = "pmic_touch",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = mrstouch_probe,
+ .suspend = mrstouch_suspend,
+ .resume = mrstouch_resume,
+ .remove = mrstouch_remove,
+};
+
+static int __init mrstouch_module_init(void)
+{
+ int err;
+
+ mrstouch_debug("%s", __func__);
+ err = spi_register_driver(&mrstouch_driver);
+ if (err) {
+ mrstouch_debug("%s(%d)", "SPI PENDET failed", err);
+ return -1;
+ }
+
+ return 0;
+}
+
+static void __exit mrstouch_module_exit(void)
+{
+ mrstouch_debug("%s", __func__);
+ spi_unregister_driver(&mrstouch_driver);
+ return;
+}
+
+module_init(mrstouch_module_init);
+module_exit(mrstouch_module_exit);
+
+MODULE_AUTHOR("Sreedhara Murthy. D.S, sreedhara.ds@intel.com");
+MODULE_DESCRIPTION("Intel Moorestown Resistive Touch Screen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/msm/Kconfig b/drivers/staging/msm/Kconfig
new file mode 100644
index 0000000..c57039f
--- /dev/null
+++ b/drivers/staging/msm/Kconfig
@@ -0,0 +1,134 @@
+config MSM_STAGING
+ tristate "MSM Frame Buffer Support"
+ depends on FB && ARCH_MSM && !FB_MSM
+ select FB_BACKLIGHT if FB_MSM_BACKLIGHT
+ select NEW_LEDS
+ select LEDS_CLASS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Support for MSM Framebuffer.
+
+if MSM_STAGING
+
+config FB_MSM_LCDC_HW
+ bool
+ default n
+
+choice
+ prompt "MDP HW version"
+ default FB_MSM_MDP31
+
+config FB_MSM_MDP31
+ select FB_MSM_LCDC_HW
+ bool "MDP HW ver3.1"
+ ---help---
+ Support for MSM MDP HW revision 3.1
+ Say Y here if this is msm8x50 variant platform.
+endchoice
+
+config FB_MSM_LCDC
+ bool
+ default n
+
+config FB_MSM_TVOUT
+ bool
+ default n
+
+config FB_MSM_LCDC_PANEL
+ bool
+ select FB_MSM_LCDC
+ default n
+
+config FB_MSM_LCDC_PRISM_WVGA
+ bool
+ select FB_MSM_LCDC_PANEL
+ default n
+
+config FB_MSM_LCDC_ST1_WXGA
+ bool
+ select FB_MSM_LCDC_PANEL
+ default n
+
+config FB_MSM_LCDC_ST15_WXGA
+ bool
+ select FB_MSM_LCDC_PANEL
+ default n
+
+config FB_MSM_LCDC_WXGA
+ bool
+ select FB_MSM_LCDC_PANEL
+ default n
+
+choice
+ prompt "LCD Panel"
+ default FB_MSM_LCDC_ST15_PANEL
+
+config FB_MSM_LCDC_PRISM_WVGA_PANEL
+ depends on FB_MSM_LCDC_HW
+ bool "LCDC Prism WVGA Panel"
+ select FB_MSM_LCDC_PRISM_WVGA
+ ---help---
+ Support for LCDC Prism WVGA (800x480) panel
+
+
+config FB_MSM_LCDC_ST15_PANEL
+ depends on FB_MSM_LCDC_HW
+ bool "LCDC ST1.5 Panel"
+ select FB_MSM_LCDC_ST15_WXGA
+ ---help---
+ Support for ST1.5 WXGA (1366x768) panel
+
+config FB_MSM_PANEL_NONE
+ bool "NONE"
+ ---help---
+ This will disable LCD panel
+endchoice
+
+choice
+ prompt "Secondary LCD Panel"
+ depends on FB_MSM_MDP31
+ default FB_MSM_SECONDARY_PANEL_NONE
+
+config FB_MSM_SECONDARY_PANEL_NONE
+ bool "NONE"
+ ---help---
+ No secondary panel
+endchoice
+
+config FB_MSM_TVOUT_NTSC
+ bool
+ select FB_MSM_TVOUT
+ default n
+
+config FB_MSM_TVOUT_PAL
+ bool
+ select FB_MSM_TVOUT
+ default n
+
+choice
+ depends on (FB_MSM_MDP22 || FB_MSM_MDP31)
+ prompt "TVOut Region"
+ default FB_MSM_TVOUT_NTSC_M
+
+config FB_MSM_TVOUT_NTSC_M
+ bool "NTSC M"
+ select FB_MSM_TVOUT_NTSC
+ ---help---
+ Support for NTSC M region (North American and Korea)
+
+config FB_MSM_TVOUT_NONE
+ bool "NONE"
+ ---help---
+ This will disable TV Out functionality.
+endchoice
+
+config PMEM_KERNEL_SIZE
+ int "PMEM for kernel components (in MB)"
+ default 2
+ depends on ARCH_QSD8X50
+ help
+ Configures the amount of PMEM for use by kernel components
+ (in MB; minimum 2MB)
+endif
diff --git a/drivers/staging/msm/Makefile b/drivers/staging/msm/Makefile
new file mode 100644
index 0000000..98a0ce1
--- /dev/null
+++ b/drivers/staging/msm/Makefile
@@ -0,0 +1,93 @@
+obj-y := msm_fb.o staging-devices.o memory.o
+
+obj-$(CONFIG_FB_MSM_LOGO) += logo.o
+obj-$(CONFIG_FB_BACKLIGHT) += msm_fb_bl.o
+
+# MDP
+obj-y += mdp.o
+
+ifeq ($(CONFIG_FB_MSM_MDP40),y)
+obj-y += mdp4_util.o
+obj-$(CONFIG_DEBUG_FS) += mdp4_debugfs.o
+else
+obj-y += mdp_hw_init.o
+obj-y += mdp_ppp.o
+ifeq ($(CONFIG_FB_MSM_MDP31),y)
+obj-y += mdp_ppp_v31.o
+obj-$(CONFIG_MDP_PPP_ASYNC_OP) += mdp_ppp_dq.o
+else
+obj-y += mdp_ppp_v20.o
+endif
+endif
+
+ifeq ($(CONFIG_FB_MSM_OVERLAY),y)
+obj-y += mdp4_overlay.o
+obj-y += mdp4_overlay_lcdc.o
+obj-y += mdp4_overlay_mddi.o
+else
+obj-y += mdp_dma_lcdc.o
+endif
+
+obj-y += mdp_dma.o
+obj-y += mdp_dma_s.o
+obj-y += mdp_vsync.o
+obj-y += mdp_cursor.o
+obj-y += mdp_dma_tv.o
+
+# EBI2
+obj-$(CONFIG_FB_MSM_EBI2) += ebi2_lcd.o
+
+# LCDC
+obj-$(CONFIG_FB_MSM_LCDC) += lcdc.o
+
+# MDDI
+msm_mddi-objs := mddi.o mddihost.o mddihosti.o
+obj-$(CONFIG_FB_MSM_MDDI) += msm_mddi.o
+
+# External MDDI
+msm_mddi_ext-objs := mddihost_e.o mddi_ext.o
+obj-$(CONFIG_FB_MSM_EXTMDDI) += msm_mddi_ext.o
+
+# TVEnc
+obj-$(CONFIG_FB_MSM_TVOUT) += tvenc.o
+
+# MSM FB Panel
+obj-y += msm_fb_panel.o
+obj-$(CONFIG_FB_MSM_EBI2_TMD_QVGA_EPSON_QCIF) += ebi2_tmd20.o
+obj-$(CONFIG_FB_MSM_EBI2_TMD_QVGA_EPSON_QCIF) += ebi2_l2f.o
+
+ifeq ($(CONFIG_FB_MSM_MDDI_AUTO_DETECT),y)
+obj-y += mddi_prism.o
+obj-y += mddi_toshiba.o
+obj-y += mddi_toshiba_vga.o
+obj-y += mddi_toshiba_wvga_pt.o
+obj-y += mddi_toshiba_wvga.o
+obj-y += mddi_sharp.o
+else
+obj-$(CONFIG_FB_MSM_MDDI_PRISM_WVGA) += mddi_prism.o
+obj-$(CONFIG_FB_MSM_MDDI_TOSHIBA_COMMON) += mddi_toshiba.o
+obj-$(CONFIG_FB_MSM_MDDI_TOSHIBA_COMMON_VGA) += mddi_toshiba_vga.o
+obj-$(CONFIG_FB_MSM_MDDI_TOSHIBA_WVGA_PORTRAIT) += mddi_toshiba_wvga_pt.o
+obj-$(CONFIG_FB_MSM_MDDI_TOSHIBA_WVGA) += mddi_toshiba_wvga.o
+obj-$(CONFIG_FB_MSM_MDDI_SHARP_QVGA_128x128) += mddi_sharp.o
+endif
+
+obj-$(CONFIG_FB_MSM_LCDC_PANEL) += lcdc_panel.o
+obj-$(CONFIG_FB_MSM_LCDC_PRISM_WVGA) += lcdc_prism.o
+obj-$(CONFIG_FB_MSM_LCDC_EXTERNAL_WXGA) += lcdc_external.o
+obj-$(CONFIG_FB_MSM_LCDC_GORDON_VGA) += lcdc_gordon.o
+obj-$(CONFIG_FB_MSM_LCDC_WXGA) += lcdc_wxga.o
+obj-$(CONFIG_FB_MSM_LCDC_TOSHIBA_WVGA_PT) += lcdc_toshiba_wvga_pt.o
+obj-$(CONFIG_FB_MSM_LCDC_SHARP_WVGA_PT) += lcdc_sharp_wvga_pt.o
+obj-$(CONFIG_FB_MSM_LCDC_GRAPEFRUIT_VGA) += lcdc_grapefruit.o
+obj-$(CONFIG_FB_MSM_LCDC_ST1_WXGA) += lcdc_st1_wxga.o
+obj-$(CONFIG_FB_MSM_LCDC_ST15_WXGA) += lcdc_st15.o
+obj-$(CONFIG_FB_MSM_HDMI_SII_EXTERNAL_720P) += hdmi_sii9022.o
+
+obj-$(CONFIG_FB_MSM_TVOUT_NTSC) += tv_ntsc.o
+obj-$(CONFIG_FB_MSM_TVOUT_PAL) += tv_pal.o
+
+obj-$(CONFIG_FB_MSM_EXTMDDI_SVGA) += mddi_ext_lcd.o
+
+clean:
+ rm *.o .*cmd
diff --git a/drivers/staging/msm/TODO b/drivers/staging/msm/TODO
new file mode 100644
index 0000000..05107a7
--- /dev/null
+++ b/drivers/staging/msm/TODO
@@ -0,0 +1,3 @@
+- Merge this code with the existing MSM framebuffer
+- General style clean ups.
+
diff --git a/drivers/staging/msm/ebi2_l2f.c b/drivers/staging/msm/ebi2_l2f.c
new file mode 100644
index 0000000..eea891d
--- /dev/null
+++ b/drivers/staging/msm/ebi2_l2f.c
@@ -0,0 +1,569 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+#include <linux/memory.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include "linux/proc_fs.h"
+
+#include <linux/delay.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+
+/* The following are for MSM5100 on Gator
+*/
+#ifdef FEATURE_PM1000
+#include "pm1000.h"
+#endif /* FEATURE_PM1000 */
+/* The following are for MSM6050 on Bambi
+*/
+#ifdef FEATURE_PMIC_LCDKBD_LED_DRIVER
+#include "pm.h"
+#endif /* FEATURE_PMIC_LCDKBD_LED_DRIVER */
+
+#ifdef DISP_DEVICE_18BPP
+#undef DISP_DEVICE_18BPP
+#define DISP_DEVICE_16BPP
+#endif
+
+#define QCIF_WIDTH 176
+#define QCIF_HEIGHT 220
+
+static void *DISP_CMD_PORT;
+static void *DISP_DATA_PORT;
+
+#define DISP_CMD_DISON 0xaf
+#define DISP_CMD_DISOFF 0xae
+#define DISP_CMD_DISNOR 0xa6
+#define DISP_CMD_DISINV 0xa7
+#define DISP_CMD_DISCTL 0xca
+#define DISP_CMD_GCP64 0xcb
+#define DISP_CMD_GCP16 0xcc
+#define DISP_CMD_GSSET 0xcd
+#define DISP_GS_2 0x02
+#define DISP_GS_16 0x01
+#define DISP_GS_64 0x00
+#define DISP_CMD_SLPIN 0x95
+#define DISP_CMD_SLPOUT 0x94
+#define DISP_CMD_SD_PSET 0x75
+#define DISP_CMD_MD_PSET 0x76
+#define DISP_CMD_SD_CSET 0x15
+#define DISP_CMD_MD_CSET 0x16
+#define DISP_CMD_DATCTL 0xbc
+#define DISP_DATCTL_666 0x08
+#define DISP_DATCTL_565 0x28
+#define DISP_DATCTL_444 0x38
+#define DISP_CMD_RAMWR 0x5c
+#define DISP_CMD_RAMRD 0x5d
+#define DISP_CMD_PTLIN 0xa8
+#define DISP_CMD_PTLOUT 0xa9
+#define DISP_CMD_ASCSET 0xaa
+#define DISP_CMD_SCSTART 0xab
+#define DISP_CMD_VOLCTL 0xc6
+#define DISP_VOLCTL_TONE 0x80
+#define DISP_CMD_NOp 0x25
+#define DISP_CMD_OSSEL 0xd0
+#define DISP_CMD_3500KSET 0xd1
+#define DISP_CMD_3500KEND 0xd2
+#define DISP_CMD_14MSET 0xd3
+#define DISP_CMD_14MEND 0xd4
+
+#define DISP_CMD_OUT(cmd) outpw(DISP_CMD_PORT, cmd);
+
+#define DISP_DATA_OUT(data) outpw(DISP_DATA_PORT, data);
+
+#define DISP_DATA_IN() inpw(DISP_DATA_PORT);
+
+/* Epson device column number starts at 2
+*/
+#define DISP_SET_RECT(ulhc_row, lrhc_row, ulhc_col, lrhc_col) \
+ DISP_CMD_OUT(DISP_CMD_SD_PSET) \
+ DISP_DATA_OUT((ulhc_row) & 0xFF) \
+ DISP_DATA_OUT((ulhc_row) >> 8) \
+ DISP_DATA_OUT((lrhc_row) & 0xFF) \
+ DISP_DATA_OUT((lrhc_row) >> 8) \
+ DISP_CMD_OUT(DISP_CMD_SD_CSET) \
+ DISP_DATA_OUT(((ulhc_col)+2) & 0xFF) \
+ DISP_DATA_OUT(((ulhc_col)+2) >> 8) \
+ DISP_DATA_OUT(((lrhc_col)+2) & 0xFF) \
+ DISP_DATA_OUT(((lrhc_col)+2) >> 8)
+
+#define DISP_MIN_CONTRAST 0
+#define DISP_MAX_CONTRAST 127
+#define DISP_DEFAULT_CONTRAST 80
+
+#define DISP_MIN_BACKLIGHT 0
+#define DISP_MAX_BACKLIGHT 15
+#define DISP_DEFAULT_BACKLIGHT 2
+
+#define WAIT_SEC(sec) mdelay((sec)/1000)
+
+static word disp_area_start_row;
+static word disp_area_end_row;
+static byte disp_contrast = DISP_DEFAULT_CONTRAST;
+static boolean disp_powered_up;
+static boolean disp_initialized = FALSE;
+/* For some reason the contrast set at init time is not good. Need to do
+ * it again
+ */
+static boolean display_on = FALSE;
+static void epsonQcif_disp_init(struct platform_device *pdev);
+static void epsonQcif_disp_set_contrast(word contrast);
+static void epsonQcif_disp_set_display_area(word start_row, word end_row);
+static int epsonQcif_disp_off(struct platform_device *pdev);
+static int epsonQcif_disp_on(struct platform_device *pdev);
+static void epsonQcif_disp_set_rect(int x, int y, int xres, int yres);
+
+volatile word databack;
+static void epsonQcif_disp_init(struct platform_device *pdev)
+{
+ struct msm_fb_data_type *mfd;
+
+ int i;
+
+ if (disp_initialized)
+ return;
+
+ mfd = platform_get_drvdata(pdev);
+
+ DISP_CMD_PORT = mfd->cmd_port;
+ DISP_DATA_PORT = mfd->data_port;
+
+ /* Sleep in */
+ DISP_CMD_OUT(DISP_CMD_SLPIN);
+
+ /* Display off */
+ DISP_CMD_OUT(DISP_CMD_DISOFF);
+
+ /* Display normal */
+ DISP_CMD_OUT(DISP_CMD_DISNOR);
+
+ /* Set data mode */
+ DISP_CMD_OUT(DISP_CMD_DATCTL);
+ DISP_DATA_OUT(DISP_DATCTL_565);
+
+ /* Set display timing */
+ DISP_CMD_OUT(DISP_CMD_DISCTL);
+ DISP_DATA_OUT(0x1c); /* p1 */
+ DISP_DATA_OUT(0x02); /* p1 */
+ DISP_DATA_OUT(0x82); /* p2 */
+ DISP_DATA_OUT(0x00); /* p3 */
+ DISP_DATA_OUT(0x00); /* p4 */
+ DISP_DATA_OUT(0xe0); /* p5 */
+ DISP_DATA_OUT(0x00); /* p5 */
+ DISP_DATA_OUT(0xdc); /* p6 */
+ DISP_DATA_OUT(0x00); /* p6 */
+ DISP_DATA_OUT(0x02); /* p7 */
+ DISP_DATA_OUT(0x00); /* p8 */
+
+ /* Set 64 gray scale level */
+ DISP_CMD_OUT(DISP_CMD_GCP64);
+ DISP_DATA_OUT(0x08); /* p01 */
+ DISP_DATA_OUT(0x00);
+ DISP_DATA_OUT(0x2a); /* p02 */
+ DISP_DATA_OUT(0x00);
+ DISP_DATA_OUT(0x4e); /* p03 */
+ DISP_DATA_OUT(0x00);
+ DISP_DATA_OUT(0x6b); /* p04 */
+ DISP_DATA_OUT(0x00);
+ DISP_DATA_OUT(0x88); /* p05 */
+ DISP_DATA_OUT(0x00);
+ DISP_DATA_OUT(0xa3); /* p06 */
+ DISP_DATA_OUT(0x00);
+ DISP_DATA_OUT(0xba); /* p07 */
+ DISP_DATA_OUT(0x00);
+ DISP_DATA_OUT(0xd1); /* p08 */
+ DISP_DATA_OUT(0x00);
+ DISP_DATA_OUT(0xe5); /* p09 */
+ DISP_DATA_OUT(0x00);
+ DISP_DATA_OUT(0xf3); /* p10 */
+ DISP_DATA_OUT(0x00);
+ DISP_DATA_OUT(0x03); /* p11 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0x13); /* p12 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0x22); /* p13 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0x2f); /* p14 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0x3b); /* p15 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0x46); /* p16 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0x51); /* p17 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0x5b); /* p18 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0x64); /* p19 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0x6c); /* p20 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0x74); /* p21 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0x7c); /* p22 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0x83); /* p23 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0x8a); /* p24 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0x91); /* p25 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0x98); /* p26 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0x9f); /* p27 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xa6); /* p28 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xac); /* p29 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xb2); /* p30 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xb7); /* p31 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xbc); /* p32 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xc1); /* p33 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xc6); /* p34 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xcb); /* p35 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xd0); /* p36 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xd4); /* p37 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xd8); /* p38 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xdc); /* p39 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xe0); /* p40 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xe4); /* p41 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xe8); /* p42 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xec); /* p43 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xf0); /* p44 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xf4); /* p45 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xf8); /* p46 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xfb); /* p47 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xfe); /* p48 */
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0x01); /* p49 */
+ DISP_DATA_OUT(0x02);
+ DISP_DATA_OUT(0x03); /* p50 */
+ DISP_DATA_OUT(0x02);
+ DISP_DATA_OUT(0x05); /* p51 */
+ DISP_DATA_OUT(0x02);
+ DISP_DATA_OUT(0x07); /* p52 */
+ DISP_DATA_OUT(0x02);
+ DISP_DATA_OUT(0x09); /* p53 */
+ DISP_DATA_OUT(0x02);
+ DISP_DATA_OUT(0x0b); /* p54 */
+ DISP_DATA_OUT(0x02);
+ DISP_DATA_OUT(0x0d); /* p55 */
+ DISP_DATA_OUT(0x02);
+ DISP_DATA_OUT(0x0f); /* p56 */
+ DISP_DATA_OUT(0x02);
+ DISP_DATA_OUT(0x11); /* p57 */
+ DISP_DATA_OUT(0x02);
+ DISP_DATA_OUT(0x13); /* p58 */
+ DISP_DATA_OUT(0x02);
+ DISP_DATA_OUT(0x15); /* p59 */
+ DISP_DATA_OUT(0x02);
+ DISP_DATA_OUT(0x17); /* p60 */
+ DISP_DATA_OUT(0x02);
+ DISP_DATA_OUT(0x19); /* p61 */
+ DISP_DATA_OUT(0x02);
+ DISP_DATA_OUT(0x1b); /* p62 */
+ DISP_DATA_OUT(0x02);
+ DISP_DATA_OUT(0x1c); /* p63 */
+ DISP_DATA_OUT(0x02);
+
+ /* Set 16 gray scale level */
+ DISP_CMD_OUT(DISP_CMD_GCP16);
+ DISP_DATA_OUT(0x1a); /* p01 */
+ DISP_DATA_OUT(0x32); /* p02 */
+ DISP_DATA_OUT(0x42); /* p03 */
+ DISP_DATA_OUT(0x4c); /* p04 */
+ DISP_DATA_OUT(0x58); /* p05 */
+ DISP_DATA_OUT(0x5f); /* p06 */
+ DISP_DATA_OUT(0x66); /* p07 */
+ DISP_DATA_OUT(0x6b); /* p08 */
+ DISP_DATA_OUT(0x70); /* p09 */
+ DISP_DATA_OUT(0x74); /* p10 */
+ DISP_DATA_OUT(0x78); /* p11 */
+ DISP_DATA_OUT(0x7b); /* p12 */
+ DISP_DATA_OUT(0x7e); /* p13 */
+ DISP_DATA_OUT(0x80); /* p14 */
+ DISP_DATA_OUT(0x82); /* p15 */
+
+ /* Set DSP column */
+ DISP_CMD_OUT(DISP_CMD_MD_CSET);
+ DISP_DATA_OUT(0xff);
+ DISP_DATA_OUT(0x03);
+ DISP_DATA_OUT(0xff);
+ DISP_DATA_OUT(0x03);
+
+ /* Set DSP page */
+ DISP_CMD_OUT(DISP_CMD_MD_PSET);
+ DISP_DATA_OUT(0xff);
+ DISP_DATA_OUT(0x01);
+ DISP_DATA_OUT(0xff);
+ DISP_DATA_OUT(0x01);
+
+ /* Set ARM column */
+ DISP_CMD_OUT(DISP_CMD_SD_CSET);
+ DISP_DATA_OUT(0x02);
+ DISP_DATA_OUT(0x00);
+ DISP_DATA_OUT((QCIF_WIDTH + 1) & 0xFF);
+ DISP_DATA_OUT((QCIF_WIDTH + 1) >> 8);
+
+ /* Set ARM page */
+ DISP_CMD_OUT(DISP_CMD_SD_PSET);
+ DISP_DATA_OUT(0x00);
+ DISP_DATA_OUT(0x00);
+ DISP_DATA_OUT((QCIF_HEIGHT - 1) & 0xFF);
+ DISP_DATA_OUT((QCIF_HEIGHT - 1) >> 8);
+
+ /* Set 64 gray scales */
+ DISP_CMD_OUT(DISP_CMD_GSSET);
+ DISP_DATA_OUT(DISP_GS_64);
+
+ DISP_CMD_OUT(DISP_CMD_OSSEL);
+ DISP_DATA_OUT(0);
+
+ /* Sleep out */
+ DISP_CMD_OUT(DISP_CMD_SLPOUT);
+
+ WAIT_SEC(40000);
+
+ /* Initialize power IC */
+ DISP_CMD_OUT(DISP_CMD_VOLCTL);
+ DISP_DATA_OUT(DISP_VOLCTL_TONE);
+
+ WAIT_SEC(40000);
+
+ /* Set electronic volume, d'xx */
+ DISP_CMD_OUT(DISP_CMD_VOLCTL);
+ DISP_DATA_OUT(DISP_DEFAULT_CONTRAST); /* value from 0 to 127 */
+
+ /* Initialize display data */
+ DISP_SET_RECT(0, (QCIF_HEIGHT - 1), 0, (QCIF_WIDTH - 1));
+ DISP_CMD_OUT(DISP_CMD_RAMWR);
+ for (i = 0; i < QCIF_HEIGHT * QCIF_WIDTH; i++)
+ DISP_DATA_OUT(0xffff);
+
+ DISP_CMD_OUT(DISP_CMD_RAMRD);
+ databack = DISP_DATA_IN();
+ databack = DISP_DATA_IN();
+ databack = DISP_DATA_IN();
+ databack = DISP_DATA_IN();
+
+ WAIT_SEC(80000);
+
+ DISP_CMD_OUT(DISP_CMD_DISON);
+
+ disp_area_start_row = 0;
+ disp_area_end_row = QCIF_HEIGHT - 1;
+ disp_powered_up = TRUE;
+ disp_initialized = TRUE;
+ epsonQcif_disp_set_display_area(0, QCIF_HEIGHT - 1);
+ display_on = TRUE;
+}
+
+static void epsonQcif_disp_set_rect(int x, int y, int xres, int yres)
+{
+ if (!disp_initialized)
+ return;
+
+ DISP_SET_RECT(y, y + yres - 1, x, x + xres - 1);
+ DISP_CMD_OUT(DISP_CMD_RAMWR);
+}
+
+static void epsonQcif_disp_set_display_area(word start_row, word end_row)
+{
+ if (!disp_initialized)
+ return;
+
+ if ((start_row == disp_area_start_row)
+ && (end_row == disp_area_end_row))
+ return;
+ disp_area_start_row = start_row;
+ disp_area_end_row = end_row;
+
+ /* Range checking
+ */
+ if (end_row >= QCIF_HEIGHT)
+ end_row = QCIF_HEIGHT - 1;
+ if (start_row > end_row)
+ start_row = end_row;
+
+ /* When display is not the full screen, gray scale is set to
+ ** 2; otherwise it is set to 64.
+ */
+ if ((start_row == 0) && (end_row == (QCIF_HEIGHT - 1))) {
+ /* The whole screen */
+ DISP_CMD_OUT(DISP_CMD_PTLOUT);
+ WAIT_SEC(10000);
+ DISP_CMD_OUT(DISP_CMD_DISOFF);
+ WAIT_SEC(100000);
+ DISP_CMD_OUT(DISP_CMD_GSSET);
+ DISP_DATA_OUT(DISP_GS_64);
+ WAIT_SEC(100000);
+ DISP_CMD_OUT(DISP_CMD_DISON);
+ } else {
+ /* partial screen */
+ DISP_CMD_OUT(DISP_CMD_PTLIN);
+ DISP_DATA_OUT(start_row);
+ DISP_DATA_OUT(start_row >> 8);
+ DISP_DATA_OUT(end_row);
+ DISP_DATA_OUT(end_row >> 8);
+ DISP_CMD_OUT(DISP_CMD_GSSET);
+ DISP_DATA_OUT(DISP_GS_2);
+ }
+}
+
+static int epsonQcif_disp_off(struct platform_device *pdev)
+{
+ if (!disp_initialized)
+ epsonQcif_disp_init(pdev);
+
+ if (display_on) {
+ DISP_CMD_OUT(DISP_CMD_DISOFF);
+ DISP_CMD_OUT(DISP_CMD_SLPIN);
+ display_on = FALSE;
+ }
+
+ return 0;
+}
+
+static int epsonQcif_disp_on(struct platform_device *pdev)
+{
+ if (!disp_initialized)
+ epsonQcif_disp_init(pdev);
+
+ if (!display_on) {
+ DISP_CMD_OUT(DISP_CMD_SLPOUT);
+ WAIT_SEC(40000);
+ DISP_CMD_OUT(DISP_CMD_DISON);
+ epsonQcif_disp_set_contrast(disp_contrast);
+ display_on = TRUE;
+ }
+
+ return 0;
+}
+
+static void epsonQcif_disp_set_contrast(word contrast)
+{
+ if (!disp_initialized)
+ return;
+
+ /* Initialize power IC, d'24 */
+ DISP_CMD_OUT(DISP_CMD_VOLCTL);
+ DISP_DATA_OUT(DISP_VOLCTL_TONE);
+
+ WAIT_SEC(40000);
+
+ /* Set electronic volume, d'xx */
+ DISP_CMD_OUT(DISP_CMD_VOLCTL);
+ if (contrast > 127)
+ contrast = 127;
+ DISP_DATA_OUT(contrast); /* value from 0 to 127 */
+ disp_contrast = (byte) contrast;
+} /* End disp_set_contrast */
+
+static void epsonQcif_disp_clear_screen_area(
+ word start_row, word end_row, word start_column, word end_column) {
+ int32 i;
+
+ /* Clear the display screen */
+ DISP_SET_RECT(start_row, end_row, start_column, end_column);
+ DISP_CMD_OUT(DISP_CMD_RAMWR);
+ i = (end_row - start_row + 1) * (end_column - start_column + 1);
+ for (; i > 0; i--)
+ DISP_DATA_OUT(0xffff);
+}
+
+static int __init epsonQcif_probe(struct platform_device *pdev)
+{
+ msm_fb_add_device(pdev);
+
+ return 0;
+}
+
+static struct platform_driver this_driver = {
+ .probe = epsonQcif_probe,
+ .driver = {
+ .name = "ebi2_epson_qcif",
+ },
+};
+
+static struct msm_fb_panel_data epsonQcif_panel_data = {
+ .on = epsonQcif_disp_on,
+ .off = epsonQcif_disp_off,
+ .set_rect = epsonQcif_disp_set_rect,
+};
+
+static struct platform_device this_device = {
+ .name = "ebi2_epson_qcif",
+ .id = 0,
+ .dev = {
+ .platform_data = &epsonQcif_panel_data,
+ }
+};
+
+static int __init epsonQcif_init(void)
+{
+ int ret;
+ struct msm_panel_info *pinfo;
+
+ ret = platform_driver_register(&this_driver);
+ if (!ret) {
+ pinfo = &epsonQcif_panel_data.panel_info;
+ pinfo->xres = QCIF_WIDTH;
+ pinfo->yres = QCIF_HEIGHT;
+ pinfo->type = EBI2_PANEL;
+ pinfo->pdest = DISPLAY_2;
+ pinfo->wait_cycle = 0x808000;
+ pinfo->bpp = 16;
+ pinfo->fb_num = 2;
+ pinfo->lcd.vsync_enable = FALSE;
+
+ ret = platform_device_register(&this_device);
+ if (ret)
+ platform_driver_unregister(&this_driver);
+ }
+
+ return ret;
+}
+
+module_init(epsonQcif_init);
diff --git a/drivers/staging/msm/ebi2_lcd.c b/drivers/staging/msm/ebi2_lcd.c
new file mode 100644
index 0000000..b41e123
--- /dev/null
+++ b/drivers/staging/msm/ebi2_lcd.c
@@ -0,0 +1,250 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/uaccess.h>
+#include <linux/workqueue.h>
+#include <linux/string.h>
+#include <linux/version.h>
+#include <linux/proc_fs.h>
+#include <linux/vmalloc.h>
+#include <linux/debugfs.h>
+
+#include "msm_fb.h"
+
+static int ebi2_lcd_probe(struct platform_device *pdev);
+static int ebi2_lcd_remove(struct platform_device *pdev);
+
+static struct platform_driver ebi2_lcd_driver = {
+ .probe = ebi2_lcd_probe,
+ .remove = ebi2_lcd_remove,
+ .suspend = NULL,
+ .suspend_late = NULL,
+ .resume_early = NULL,
+ .resume = NULL,
+ .shutdown = NULL,
+ .driver = {
+ .name = "ebi2_lcd",
+ },
+};
+
+static void *ebi2_base;
+static void *ebi2_lcd_cfg0;
+static void *ebi2_lcd_cfg1;
+static void __iomem *lcd01_base;
+static void __iomem *lcd02_base;
+static int ebi2_lcd_resource_initialized;
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+
+static int ebi2_lcd_probe(struct platform_device *pdev)
+{
+ struct msm_fb_data_type *mfd;
+ struct platform_device *mdp_dev = NULL;
+ struct msm_fb_panel_data *pdata = NULL;
+ int rc, i;
+
+ if (pdev->id == 0) {
+ for (i = 0; i < pdev->num_resources; i++) {
+ if (!strncmp(pdev->resource[i].name, "base", 4)) {
+ ebi2_base = ioremap(pdev->resource[i].start,
+ pdev->resource[i].end -
+ pdev->resource[i].start + 1);
+ if (!ebi2_base) {
+ printk(KERN_ERR
+ "ebi2_base ioremap failed!\n");
+ return -ENOMEM;
+ }
+ ebi2_lcd_cfg0 = (void *)(ebi2_base + 0x20);
+ ebi2_lcd_cfg1 = (void *)(ebi2_base + 0x24);
+ } else if (!strncmp(pdev->resource[i].name,
+ "lcd01", 5)) {
+ lcd01_base = ioremap(pdev->resource[i].start,
+ pdev->resource[i].end -
+ pdev->resource[i].start + 1);
+ if (!lcd01_base) {
+ printk(KERN_ERR
+ "lcd01_base ioremap failed!\n");
+ return -ENOMEM;
+ }
+ } else if (!strncmp(pdev->resource[i].name,
+ "lcd02", 5)) {
+ lcd02_base = ioremap(pdev->resource[i].start,
+ pdev->resource[i].end -
+ pdev->resource[i].start + 1);
+ if (!lcd02_base) {
+ printk(KERN_ERR
+ "lcd02_base ioremap failed!\n");
+ return -ENOMEM;
+ }
+ }
+ }
+ ebi2_lcd_resource_initialized = 1;
+ return 0;
+ }
+
+ if (!ebi2_lcd_resource_initialized)
+ return -EPERM;
+
+ mfd = platform_get_drvdata(pdev);
+
+ if (!mfd)
+ return -ENODEV;
+
+ if (mfd->key != MFD_KEY)
+ return -EINVAL;
+
+ if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+ return -ENOMEM;
+
+ if (ebi2_base == NULL)
+ return -ENOMEM;
+
+ mdp_dev = platform_device_alloc("mdp", pdev->id);
+ if (!mdp_dev)
+ return -ENOMEM;
+
+ /* link to the latest pdev */
+ mfd->pdev = mdp_dev;
+ mfd->dest = DISPLAY_LCD;
+
+ /* add panel data */
+ if (platform_device_add_data
+ (mdp_dev, pdev->dev.platform_data,
+ sizeof(struct msm_fb_panel_data))) {
+ printk(KERN_ERR "ebi2_lcd_probe: platform_device_add_data failed!\n");
+ platform_device_put(mdp_dev);
+ return -ENOMEM;
+ }
+
+ /* data chain */
+ pdata = mdp_dev->dev.platform_data;
+ pdata->on = panel_next_on;
+ pdata->off = panel_next_off;
+ pdata->next = pdev;
+
+ /* get/set panel specific fb info */
+ mfd->panel_info = pdata->panel_info;
+
+ if (mfd->panel_info.bpp == 24)
+ mfd->fb_imgType = MDP_RGB_888;
+ else
+ mfd->fb_imgType = MDP_RGB_565;
+
+ /* config msm ebi2 lcd register */
+ if (mfd->panel_info.pdest == DISPLAY_1) {
+ outp32(ebi2_base,
+ (inp32(ebi2_base) & (~(EBI2_PRIM_LCD_CLR))) |
+ EBI2_PRIM_LCD_SEL);
+ /*
+ * current design has one set of cfg0/1 register to control
+ * both EBI2 channels. so, we're using the PRIM channel to
+ * configure both.
+ */
+ outp32(ebi2_lcd_cfg0, mfd->panel_info.wait_cycle);
+ if (mfd->panel_info.bpp == 18)
+ outp32(ebi2_lcd_cfg1, 0x01000000);
+ else
+ outp32(ebi2_lcd_cfg1, 0x0);
+ } else {
+#ifdef DEBUG_EBI2_LCD
+ /*
+ * confliting with QCOM SURF FPGA CS.
+ * OEM should enable below for their CS mapping
+ */
+ outp32(ebi2_base, (inp32(ebi2_base)&(~(EBI2_SECD_LCD_CLR)))
+ |EBI2_SECD_LCD_SEL);
+#endif
+ }
+
+ /*
+ * map cs (chip select) address
+ */
+ if (mfd->panel_info.pdest == DISPLAY_1) {
+ mfd->cmd_port = lcd01_base;
+ mfd->data_port =
+ (void *)((uint32) mfd->cmd_port + EBI2_PRIM_LCD_RS_PIN);
+ mfd->data_port_phys =
+ (void *)(LCD_PRIM_BASE_PHYS + EBI2_PRIM_LCD_RS_PIN);
+ } else {
+ mfd->cmd_port = lcd01_base;
+ mfd->data_port =
+ (void *)((uint32) mfd->cmd_port + EBI2_SECD_LCD_RS_PIN);
+ mfd->data_port_phys =
+ (void *)(LCD_SECD_BASE_PHYS + EBI2_SECD_LCD_RS_PIN);
+ }
+
+ /*
+ * set driver data
+ */
+ platform_set_drvdata(mdp_dev, mfd);
+
+ /*
+ * register in mdp driver
+ */
+ rc = platform_device_add(mdp_dev);
+ if (rc) {
+ goto ebi2_lcd_probe_err;
+ }
+
+ pdev_list[pdev_list_cnt++] = pdev;
+ return 0;
+
+ ebi2_lcd_probe_err:
+ platform_device_put(mdp_dev);
+ return rc;
+}
+
+static int ebi2_lcd_remove(struct platform_device *pdev)
+{
+ struct msm_fb_data_type *mfd;
+
+ mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+ if (!mfd)
+ return 0;
+
+ if (mfd->key != MFD_KEY)
+ return 0;
+
+ iounmap(mfd->cmd_port);
+
+ return 0;
+}
+
+static int ebi2_lcd_register_driver(void)
+{
+ return platform_driver_register(&ebi2_lcd_driver);
+}
+
+static int __init ebi2_lcd_driver_init(void)
+{
+ return ebi2_lcd_register_driver();
+}
+
+module_init(ebi2_lcd_driver_init);
\ No newline at end of file
diff --git a/drivers/staging/msm/ebi2_tmd20.c b/drivers/staging/msm/ebi2_tmd20.c
new file mode 100644
index 0000000..d66d039
--- /dev/null
+++ b/drivers/staging/msm/ebi2_tmd20.c
@@ -0,0 +1,1122 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+#include <linux/memory.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include "linux/proc_fs.h"
+
+#include <linux/delay.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+
+/* #define TMD20QVGA_LCD_18BPP */
+#define QVGA_WIDTH 240
+#define QVGA_HEIGHT 320
+
+#ifdef TMD20QVGA_LCD_18BPP
+#define DISP_QVGA_18BPP(x) ((((x)<<2) & 0x3FC00)|(( (x)<<1)& 0x1FE))
+#define DISP_REG(name) uint32 register_##name;
+#define OUTPORT(x, y) outpdw(x, y)
+#define INPORT(x) inpdw(x)
+#else
+#define DISP_QVGA_18BPP(x) (x)
+#define DISP_REG(name) uint16 register_##name;
+#define OUTPORT(x, y) outpw(x, y)
+#define INPORT(x) intpw(x)
+#endif
+
+static void *DISP_CMD_PORT;
+static void *DISP_DATA_PORT;
+
+#define DISP_RNTI 0x10
+
+#define DISP_CMD_OUT(cmd) OUTPORT(DISP_CMD_PORT, DISP_QVGA_18BPP(cmd))
+#define DISP_DATA_OUT(data) OUTPORT(DISP_DATA_PORT, data)
+#define DISP_DATA_IN() INPORT(DISP_DATA_PORT)
+
+#if (defined(TMD20QVGA_LCD_18BPP))
+#define DISP_DATA_OUT_16TO18BPP(x) \
+ DISP_DATA_OUT((((x)&0xf800)<<2|((x)&0x80000)>>3) \
+ | (((x)&0x7e0)<<1) \
+ | (((x)&0x1F)<<1|((x)&0x10)>>4))
+#else
+#define DISP_DATA_OUT_16TO18BPP(x) \
+ DISP_DATA_OUT(x)
+#endif
+
+#define DISP_WRITE_OUT(addr, data) \
+ register_##addr = DISP_QVGA_18BPP(data); \
+ DISP_CMD_OUT(addr); \
+ DISP_DATA_OUT(register_##addr);
+
+#define DISP_UPDATE_VALUE(addr, bitmask, data) \
+ DISP_WRITE_OUT(##addr, (register_##addr & ~(bitmask)) | (data));
+
+#define DISP_VAL_IF(bitvalue, bitmask) \
+ ((bitvalue) ? (bitmask) : 0)
+
+/* QVGA = 256 x 320 */
+/* actual display is 240 x 320...offset by 0x10 */
+#define DISP_ROW_COL_TO_ADDR(row, col) ((row) * 0x100 + col)
+#define DISP_SET_RECT(ulhc_row, lrhc_row, ulhc_col, lrhc_col) \
+ { \
+ DISP_WRITE_OUT(DISP_HORZ_RAM_ADDR_POS_1_ADDR, (ulhc_col) + tmd20qvga_panel_offset); \
+ DISP_WRITE_OUT(DISP_HORZ_RAM_ADDR_POS_2_ADDR, (lrhc_col) + tmd20qvga_panel_offset); \
+ DISP_WRITE_OUT(DISP_VERT_RAM_ADDR_POS_1_ADDR, (ulhc_row)); \
+ DISP_WRITE_OUT(DISP_VERT_RAM_ADDR_POS_2_ADDR, (lrhc_row)); \
+ DISP_WRITE_OUT(DISP_RAM_ADDR_SET_1_ADDR, (ulhc_col) + tmd20qvga_panel_offset); \
+ DISP_WRITE_OUT(DISP_RAM_ADDR_SET_2_ADDR, (ulhc_row)); \
+ }
+
+#define WAIT_MSEC(msec) mdelay(msec)
+
+/*
+ * TMD QVGA Address
+ */
+/* Display Control */
+#define DISP_START_OSCILLATION_ADDR 0x000
+DISP_REG(DISP_START_OSCILLATION_ADDR)
+#define DISP_DRIVER_OUTPUT_CTL_ADDR 0x001
+ DISP_REG(DISP_DRIVER_OUTPUT_CTL_ADDR)
+#define DISP_LCD_DRIVING_SIG_ADDR 0x002
+ DISP_REG(DISP_LCD_DRIVING_SIG_ADDR)
+#define DISP_ENTRY_MODE_ADDR 0x003
+ DISP_REG(DISP_ENTRY_MODE_ADDR)
+#define DISP_DISPLAY_CTL_1_ADDR 0x007
+ DISP_REG(DISP_DISPLAY_CTL_1_ADDR)
+#define DISP_DISPLAY_CTL_2_ADDR 0x008
+ DISP_REG(DISP_DISPLAY_CTL_2_ADDR)
+
+/* DISPLAY MODE 0x009 partial display not supported */
+#define DISP_POWER_SUPPLY_INTF_ADDR 0x00A
+ DISP_REG(DISP_POWER_SUPPLY_INTF_ADDR)
+
+/* DISPLAY MODE 0x00B xZoom feature is not supported */
+#define DISP_EXT_DISPLAY_CTL_1_ADDR 0x00C
+ DISP_REG(DISP_EXT_DISPLAY_CTL_1_ADDR)
+
+#define DISP_FRAME_CYCLE_CTL_ADDR 0x00D
+ DISP_REG(DISP_FRAME_CYCLE_CTL_ADDR)
+
+#define DISP_EXT_DISPLAY_CTL_2_ADDR 0x00E
+ DISP_REG(DISP_EXT_DISPLAY_CTL_2_ADDR)
+
+#define DISP_EXT_DISPLAY_CTL_3_ADDR 0x00F
+ DISP_REG(DISP_EXT_DISPLAY_CTL_3_ADDR)
+
+#define DISP_LTPS_CTL_1_ADDR 0x012
+ DISP_REG(DISP_LTPS_CTL_1_ADDR)
+#define DISP_LTPS_CTL_2_ADDR 0x013
+ DISP_REG(DISP_LTPS_CTL_2_ADDR)
+#define DISP_LTPS_CTL_3_ADDR 0x014
+ DISP_REG(DISP_LTPS_CTL_3_ADDR)
+#define DISP_LTPS_CTL_4_ADDR 0x018
+ DISP_REG(DISP_LTPS_CTL_4_ADDR)
+#define DISP_LTPS_CTL_5_ADDR 0x019
+ DISP_REG(DISP_LTPS_CTL_5_ADDR)
+#define DISP_LTPS_CTL_6_ADDR 0x01A
+ DISP_REG(DISP_LTPS_CTL_6_ADDR)
+#define DISP_AMP_SETTING_ADDR 0x01C
+ DISP_REG(DISP_AMP_SETTING_ADDR)
+#define DISP_MODE_SETTING_ADDR 0x01D
+ DISP_REG(DISP_MODE_SETTING_ADDR)
+#define DISP_POFF_LN_SETTING_ADDR 0x01E
+ DISP_REG(DISP_POFF_LN_SETTING_ADDR)
+/* Power Contol */
+#define DISP_POWER_CTL_1_ADDR 0x100
+ DISP_REG(DISP_POWER_CTL_1_ADDR)
+#define DISP_POWER_CTL_2_ADDR 0x101
+ DISP_REG(DISP_POWER_CTL_2_ADDR)
+#define DISP_POWER_CTL_3_ADDR 0x102
+ DISP_REG(DISP_POWER_CTL_3_ADDR)
+#define DISP_POWER_CTL_4_ADDR 0x103
+ DISP_REG(DISP_POWER_CTL_4_ADDR)
+#define DISP_POWER_CTL_5_ADDR 0x104
+ DISP_REG(DISP_POWER_CTL_5_ADDR)
+#define DISP_POWER_CTL_6_ADDR 0x105
+ DISP_REG(DISP_POWER_CTL_6_ADDR)
+#define DISP_POWER_CTL_7_ADDR 0x106
+ DISP_REG(DISP_POWER_CTL_7_ADDR)
+/* RAM Access */
+#define DISP_RAM_ADDR_SET_1_ADDR 0x200
+ DISP_REG(DISP_RAM_ADDR_SET_1_ADDR)
+#define DISP_RAM_ADDR_SET_2_ADDR 0x201
+ DISP_REG(DISP_RAM_ADDR_SET_2_ADDR)
+#define DISP_CMD_RAMRD DISP_CMD_RAMWR
+#define DISP_CMD_RAMWR 0x202
+ DISP_REG(DISP_CMD_RAMWR)
+#define DISP_RAM_DATA_MASK_1_ADDR 0x203
+ DISP_REG(DISP_RAM_DATA_MASK_1_ADDR)
+#define DISP_RAM_DATA_MASK_2_ADDR 0x204
+ DISP_REG(DISP_RAM_DATA_MASK_2_ADDR)
+/* Gamma Control, Contrast, Gray Scale Setting */
+#define DISP_GAMMA_CONTROL_1_ADDR 0x300
+ DISP_REG(DISP_GAMMA_CONTROL_1_ADDR)
+#define DISP_GAMMA_CONTROL_2_ADDR 0x301
+ DISP_REG(DISP_GAMMA_CONTROL_2_ADDR)
+#define DISP_GAMMA_CONTROL_3_ADDR 0x302
+ DISP_REG(DISP_GAMMA_CONTROL_3_ADDR)
+#define DISP_GAMMA_CONTROL_4_ADDR 0x303
+ DISP_REG(DISP_GAMMA_CONTROL_4_ADDR)
+#define DISP_GAMMA_CONTROL_5_ADDR 0x304
+ DISP_REG(DISP_GAMMA_CONTROL_5_ADDR)
+/* Coordinate Control */
+#define DISP_VERT_SCROLL_CTL_1_ADDR 0x400
+ DISP_REG(DISP_VERT_SCROLL_CTL_1_ADDR)
+#define DISP_VERT_SCROLL_CTL_2_ADDR 0x401
+ DISP_REG(DISP_VERT_SCROLL_CTL_2_ADDR)
+#define DISP_SCREEN_1_DRV_POS_1_ADDR 0x402
+ DISP_REG(DISP_SCREEN_1_DRV_POS_1_ADDR)
+#define DISP_SCREEN_1_DRV_POS_2_ADDR 0x403
+ DISP_REG(DISP_SCREEN_1_DRV_POS_2_ADDR)
+#define DISP_SCREEN_2_DRV_POS_1_ADDR 0x404
+ DISP_REG(DISP_SCREEN_2_DRV_POS_1_ADDR)
+#define DISP_SCREEN_2_DRV_POS_2_ADDR 0x405
+ DISP_REG(DISP_SCREEN_2_DRV_POS_2_ADDR)
+#define DISP_HORZ_RAM_ADDR_POS_1_ADDR 0x406
+ DISP_REG(DISP_HORZ_RAM_ADDR_POS_1_ADDR)
+#define DISP_HORZ_RAM_ADDR_POS_2_ADDR 0x407
+ DISP_REG(DISP_HORZ_RAM_ADDR_POS_2_ADDR)
+#define DISP_VERT_RAM_ADDR_POS_1_ADDR 0x408
+ DISP_REG(DISP_VERT_RAM_ADDR_POS_1_ADDR)
+#define DISP_VERT_RAM_ADDR_POS_2_ADDR 0x409
+ DISP_REG(DISP_VERT_RAM_ADDR_POS_2_ADDR)
+#define DISP_TMD_700_ADDR 0x700 /* 0x700 */
+ DISP_REG(DISP_TMD_700_ADDR)
+#define DISP_TMD_015_ADDR 0x015 /* 0x700 */
+ DISP_REG(DISP_TMD_015_ADDR)
+#define DISP_TMD_305_ADDR 0x305 /* 0x700 */
+ DISP_REG(DISP_TMD_305_ADDR)
+
+/*
+ * TMD QVGA Bit Definations
+ */
+
+#define DISP_BIT_IB15 0x8000
+#define DISP_BIT_IB14 0x4000
+#define DISP_BIT_IB13 0x2000
+#define DISP_BIT_IB12 0x1000
+#define DISP_BIT_IB11 0x0800
+#define DISP_BIT_IB10 0x0400
+#define DISP_BIT_IB09 0x0200
+#define DISP_BIT_IB08 0x0100
+#define DISP_BIT_IB07 0x0080
+#define DISP_BIT_IB06 0x0040
+#define DISP_BIT_IB05 0x0020
+#define DISP_BIT_IB04 0x0010
+#define DISP_BIT_IB03 0x0008
+#define DISP_BIT_IB02 0x0004
+#define DISP_BIT_IB01 0x0002
+#define DISP_BIT_IB00 0x0001
+/*
+ * Display Control
+ * DISP_START_OSCILLATION_ADDR Start Oscillation
+ * DISP_DRIVER_OUTPUT_CTL_ADDR Driver Output Control
+ */
+#define DISP_BITMASK_SS DISP_BIT_IB08
+#define DISP_BITMASK_NL5 DISP_BIT_IB05
+#define DISP_BITMASK_NL4 DISP_BIT_IB04
+#define DISP_BITMASK_NL3 DISP_BIT_IB03
+#define DISP_BITMASK_NL2 DISP_BIT_IB02
+#define DISP_BITMASK_NL1 DISP_BIT_IB01
+#define DISP_BITMASK_NL0 DISP_BIT_IB00
+/* DISP_LCD_DRIVING_SIG_ADDR LCD Driving Signal Setting */
+#define DISP_BITMASK_BC DISP_BIT_IB09
+/* DISP_ENTRY_MODE_ADDR Entry Mode */
+#define DISP_BITMASK_TRI DISP_BIT_IB15
+#define DISP_BITMASK_DFM1 DISP_BIT_IB14
+#define DISP_BITMASK_DFM0 DISP_BIT_IB13
+#define DISP_BITMASK_BGR DISP_BIT_IB12
+#define DISP_BITMASK_HWM0 DISP_BIT_IB08
+#define DISP_BITMASK_ID1 DISP_BIT_IB05
+#define DISP_BITMASK_ID0 DISP_BIT_IB04
+#define DISP_BITMASK_AM DISP_BIT_IB03
+/* DISP_DISPLAY_CTL_1_ADDR Display Control (1) */
+#define DISP_BITMASK_COL1 DISP_BIT_IB15
+#define DISP_BITMASK_COL0 DISP_BIT_IB14
+#define DISP_BITMASK_VLE2 DISP_BIT_IB10
+#define DISP_BITMASK_VLE1 DISP_BIT_IB09
+#define DISP_BITMASK_SPT DISP_BIT_IB08
+#define DISP_BITMASK_PT1 DISP_BIT_IB07
+#define DISP_BITMASK_PT0 DISP_BIT_IB06
+#define DISP_BITMASK_REV DISP_BIT_IB02
+/* DISP_DISPLAY_CTL_2_ADDR Display Control (2) */
+#define DISP_BITMASK_FP3 DISP_BIT_IB11
+#define DISP_BITMASK_FP2 DISP_BIT_IB10
+#define DISP_BITMASK_FP1 DISP_BIT_IB09
+#define DISP_BITMASK_FP0 DISP_BIT_IB08
+#define DISP_BITMASK_BP3 DISP_BIT_IB03
+#define DISP_BITMASK_BP2 DISP_BIT_IB02
+#define DISP_BITMASK_BP1 DISP_BIT_IB01
+#define DISP_BITMASK_BP0 DISP_BIT_IB00
+/* DISP_POWER_SUPPLY_INTF_ADDR Power Supply IC Interface Control */
+#define DISP_BITMASK_CSE DISP_BIT_IB12
+#define DISP_BITMASK_TE DISP_BIT_IB08
+#define DISP_BITMASK_IX3 DISP_BIT_IB03
+#define DISP_BITMASK_IX2 DISP_BIT_IB02
+#define DISP_BITMASK_IX1 DISP_BIT_IB01
+#define DISP_BITMASK_IX0 DISP_BIT_IB00
+/* DISP_EXT_DISPLAY_CTL_1_ADDR External Display Interface Control (1) */
+#define DISP_BITMASK_RM DISP_BIT_IB08
+#define DISP_BITMASK_DM1 DISP_BIT_IB05
+#define DISP_BITMASK_DM0 DISP_BIT_IB04
+#define DISP_BITMASK_RIM1 DISP_BIT_IB01
+#define DISP_BITMASK_RIM0 DISP_BIT_IB00
+/* DISP_FRAME_CYCLE_CTL_ADDR Frame Frequency Adjustment Control */
+#define DISP_BITMASK_DIVI1 DISP_BIT_IB09
+#define DISP_BITMASK_DIVI0 DISP_BIT_IB08
+#define DISP_BITMASK_RTNI4 DISP_BIT_IB04
+#define DISP_BITMASK_RTNI3 DISP_BIT_IB03
+#define DISP_BITMASK_RTNI2 DISP_BIT_IB02
+#define DISP_BITMASK_RTNI1 DISP_BIT_IB01
+#define DISP_BITMASK_RTNI0 DISP_BIT_IB00
+/* DISP_EXT_DISPLAY_CTL_2_ADDR External Display Interface Control (2) */
+#define DISP_BITMASK_DIVE1 DISP_BIT_IB09
+#define DISP_BITMASK_DIVE0 DISP_BIT_IB08
+#define DISP_BITMASK_RTNE7 DISP_BIT_IB07
+#define DISP_BITMASK_RTNE6 DISP_BIT_IB06
+#define DISP_BITMASK_RTNE5 DISP_BIT_IB05
+#define DISP_BITMASK_RTNE4 DISP_BIT_IB04
+#define DISP_BITMASK_RTNE3 DISP_BIT_IB03
+#define DISP_BITMASK_RTNE2 DISP_BIT_IB02
+#define DISP_BITMASK_RTNE1 DISP_BIT_IB01
+#define DISP_BITMASK_RTNE0 DISP_BIT_IB00
+/* DISP_EXT_DISPLAY_CTL_3_ADDR External Display Interface Control (3) */
+#define DISP_BITMASK_VSPL DISP_BIT_IB04
+#define DISP_BITMASK_HSPL DISP_BIT_IB03
+#define DISP_BITMASK_VPL DISP_BIT_IB02
+#define DISP_BITMASK_EPL DISP_BIT_IB01
+#define DISP_BITMASK_DPL DISP_BIT_IB00
+/* DISP_LTPS_CTL_1_ADDR LTPS Interface Control (1) */
+#define DISP_BITMASK_CLWI3 DISP_BIT_IB11
+#define DISP_BITMASK_CLWI2 DISP_BIT_IB10
+#define DISP_BITMASK_CLWI1 DISP_BIT_IB09
+#define DISP_BITMASK_CLWI0 DISP_BIT_IB08
+#define DISP_BITMASK_CLTI1 DISP_BIT_IB01
+#define DISP_BITMASK_CLTI0 DISP_BIT_IB00
+/* DISP_LTPS_CTL_2_ADDR LTPS Interface Control (2) */
+#define DISP_BITMASK_OEVBI1 DISP_BIT_IB09
+#define DISP_BITMASK_OEVBI0 DISP_BIT_IB08
+#define DISP_BITMASK_OEVFI1 DISP_BIT_IB01
+#define DISP_BITMASK_OEVFI0 DISP_BIT_IB00
+/* DISP_LTPS_CTL_3_ADDR LTPS Interface Control (3) */
+#define DISP_BITMASK_SHI1 DISP_BIT_IB01
+#define DISP_BITMASK_SHI0 DISP_BIT_IB00
+/* DISP_LTPS_CTL_4_ADDR LTPS Interface Control (4) */
+#define DISP_BITMASK_CLWE5 DISP_BIT_IB13
+#define DISP_BITMASK_CLWE4 DISP_BIT_IB12
+#define DISP_BITMASK_CLWE3 DISP_BIT_IB11
+#define DISP_BITMASK_CLWE2 DISP_BIT_IB10
+#define DISP_BITMASK_CLWE1 DISP_BIT_IB09
+#define DISP_BITMASK_CLWE0 DISP_BIT_IB08
+#define DISP_BITMASK_CLTE3 DISP_BIT_IB03
+#define DISP_BITMASK_CLTE2 DISP_BIT_IB02
+#define DISP_BITMASK_CLTE1 DISP_BIT_IB01
+#define DISP_BITMASK_CLTE0 DISP_BIT_IB00
+/* DISP_LTPS_CTL_5_ADDR LTPS Interface Control (5) */
+#define DISP_BITMASK_OEVBE3 DISP_BIT_IB11
+#define DISP_BITMASK_OEVBE2 DISP_BIT_IB10
+#define DISP_BITMASK_OEVBE1 DISP_BIT_IB09
+#define DISP_BITMASK_OEVBE0 DISP_BIT_IB08
+#define DISP_BITMASK_OEVFE3 DISP_BIT_IB03
+#define DISP_BITMASK_OEVFE2 DISP_BIT_IB02
+#define DISP_BITMASK_OEVFE1 DISP_BIT_IB01
+#define DISP_BITMASK_OEVFE0 DISP_BIT_IB00
+/* DISP_LTPS_CTL_6_ADDR LTPS Interface Control (6) */
+#define DISP_BITMASK_SHE3 DISP_BIT_IB03
+#define DISP_BITMASK_SHE2 DISP_BIT_IB02
+#define DISP_BITMASK_SHE1 DISP_BIT_IB01
+#define DISP_BITMASK_SHE0 DISP_BIT_IB00
+/* DISP_AMP_SETTING_ADDR Amplify Setting */
+#define DISP_BITMASK_ABSW1 DISP_BIT_IB01
+#define DISP_BITMASK_ABSW0 DISP_BIT_IB00
+/* DISP_MODE_SETTING_ADDR Mode Setting */
+#define DISP_BITMASK_DSTB DISP_BIT_IB02
+#define DISP_BITMASK_STB DISP_BIT_IB00
+/* DISP_POFF_LN_SETTING_ADDR Power Off Line Setting */
+#define DISP_BITMASK_POFH3 DISP_BIT_IB03
+#define DISP_BITMASK_POFH2 DISP_BIT_IB02
+#define DISP_BITMASK_POFH1 DISP_BIT_IB01
+#define DISP_BITMASK_POFH0 DISP_BIT_IB00
+
+/* Power Contol */
+/* DISP_POWER_CTL_1_ADDR Power Control (1) */
+#define DISP_BITMASK_PO DISP_BIT_IB11
+#define DISP_BITMASK_VCD DISP_BIT_IB09
+#define DISP_BITMASK_VSC DISP_BIT_IB08
+#define DISP_BITMASK_CON DISP_BIT_IB07
+#define DISP_BITMASK_ASW1 DISP_BIT_IB06
+#define DISP_BITMASK_ASW0 DISP_BIT_IB05
+#define DISP_BITMASK_OEV DISP_BIT_IB04
+#define DISP_BITMASK_OEVE DISP_BIT_IB03
+#define DISP_BITMASK_FR DISP_BIT_IB02
+#define DISP_BITMASK_D1 DISP_BIT_IB01
+#define DISP_BITMASK_D0 DISP_BIT_IB00
+/* DISP_POWER_CTL_2_ADDR Power Control (2) */
+#define DISP_BITMASK_DC4 DISP_BIT_IB15
+#define DISP_BITMASK_DC3 DISP_BIT_IB14
+#define DISP_BITMASK_SAP2 DISP_BIT_IB13
+#define DISP_BITMASK_SAP1 DISP_BIT_IB12
+#define DISP_BITMASK_SAP0 DISP_BIT_IB11
+#define DISP_BITMASK_BT2 DISP_BIT_IB10
+#define DISP_BITMASK_BT1 DISP_BIT_IB09
+#define DISP_BITMASK_BT0 DISP_BIT_IB08
+#define DISP_BITMASK_DC2 DISP_BIT_IB07
+#define DISP_BITMASK_DC1 DISP_BIT_IB06
+#define DISP_BITMASK_DC0 DISP_BIT_IB05
+#define DISP_BITMASK_AP2 DISP_BIT_IB04
+#define DISP_BITMASK_AP1 DISP_BIT_IB03
+#define DISP_BITMASK_AP0 DISP_BIT_IB02
+/* DISP_POWER_CTL_3_ADDR Power Control (3) */
+#define DISP_BITMASK_VGL4 DISP_BIT_IB10
+#define DISP_BITMASK_VGL3 DISP_BIT_IB09
+#define DISP_BITMASK_VGL2 DISP_BIT_IB08
+#define DISP_BITMASK_VGL1 DISP_BIT_IB07
+#define DISP_BITMASK_VGL0 DISP_BIT_IB06
+#define DISP_BITMASK_VGH4 DISP_BIT_IB04
+#define DISP_BITMASK_VGH3 DISP_BIT_IB03
+#define DISP_BITMASK_VGH2 DISP_BIT_IB02
+#define DISP_BITMASK_VGH1 DISP_BIT_IB01
+#define DISP_BITMASK_VGH0 DISP_BIT_IB00
+/* DISP_POWER_CTL_4_ADDR Power Control (4) */
+#define DISP_BITMASK_VC2 DISP_BIT_IB02
+#define DISP_BITMASK_VC1 DISP_BIT_IB01
+#define DISP_BITMASK_VC0 DISP_BIT_IB00
+/* DISP_POWER_CTL_5_ADDR Power Control (5) */
+#define DISP_BITMASK_VRL3 DISP_BIT_IB11
+#define DISP_BITMASK_VRL2 DISP_BIT_IB10
+#define DISP_BITMASK_VRL1 DISP_BIT_IB09
+#define DISP_BITMASK_VRL0 DISP_BIT_IB08
+#define DISP_BITMASK_PON DISP_BIT_IB04
+#define DISP_BITMASK_VRH3 DISP_BIT_IB03
+#define DISP_BITMASK_VRH2 DISP_BIT_IB02
+#define DISP_BITMASK_VRH1 DISP_BIT_IB01
+#define DISP_BITMASK_VRH0 DISP_BIT_IB00
+/* DISP_POWER_CTL_6_ADDR Power Control (6) */
+#define DISP_BITMASK_VCOMG DISP_BIT_IB13
+#define DISP_BITMASK_VDV4 DISP_BIT_IB12
+#define DISP_BITMASK_VDV3 DISP_BIT_IB11
+#define DISP_BITMASK_VDV2 DISP_BIT_IB10
+#define DISP_BITMASK_VDV1 DISP_BIT_IB09
+#define DISP_BITMASK_VDV0 DISP_BIT_IB08
+#define DISP_BITMASK_VCM4 DISP_BIT_IB04
+#define DISP_BITMASK_VCM3 DISP_BIT_IB03
+#define DISP_BITMASK_VCM2 DISP_BIT_IB02
+#define DISP_BITMASK_VCM1 DISP_BIT_IB01
+#define DISP_BITMASK_VCM0 DISP_BIT_IB00
+/* RAM Access */
+/* DISP_RAM_ADDR_SET_1_ADDR RAM Address Set (1) */
+#define DISP_BITMASK_AD7 DISP_BIT_IB07
+#define DISP_BITMASK_AD6 DISP_BIT_IB06
+#define DISP_BITMASK_AD5 DISP_BIT_IB05
+#define DISP_BITMASK_AD4 DISP_BIT_IB04
+#define DISP_BITMASK_AD3 DISP_BIT_IB03
+#define DISP_BITMASK_AD2 DISP_BIT_IB02
+#define DISP_BITMASK_AD1 DISP_BIT_IB01
+#define DISP_BITMASK_AD0 DISP_BIT_IB00
+/* DISP_RAM_ADDR_SET_2_ADDR RAM Address Set (2) */
+#define DISP_BITMASK_AD16 DISP_BIT_IB08
+#define DISP_BITMASK_AD15 DISP_BIT_IB07
+#define DISP_BITMASK_AD14 DISP_BIT_IB06
+#define DISP_BITMASK_AD13 DISP_BIT_IB05
+#define DISP_BITMASK_AD12 DISP_BIT_IB04
+#define DISP_BITMASK_AD11 DISP_BIT_IB03
+#define DISP_BITMASK_AD10 DISP_BIT_IB02
+#define DISP_BITMASK_AD9 DISP_BIT_IB01
+#define DISP_BITMASK_AD8 DISP_BIT_IB00
+/*
+ * DISP_CMD_RAMWR RAM Data Read/Write
+ * Use Data Bit Configuration
+ */
+/* DISP_RAM_DATA_MASK_1_ADDR RAM Write Data Mask (1) */
+#define DISP_BITMASK_WM11 DISP_BIT_IB13
+#define DISP_BITMASK_WM10 DISP_BIT_IB12
+#define DISP_BITMASK_WM9 DISP_BIT_IB11
+#define DISP_BITMASK_WM8 DISP_BIT_IB10
+#define DISP_BITMASK_WM7 DISP_BIT_IB09
+#define DISP_BITMASK_WM6 DISP_BIT_IB08
+#define DISP_BITMASK_WM5 DISP_BIT_IB05
+#define DISP_BITMASK_WM4 DISP_BIT_IB04
+#define DISP_BITMASK_WM3 DISP_BIT_IB03
+#define DISP_BITMASK_WM2 DISP_BIT_IB02
+#define DISP_BITMASK_WM1 DISP_BIT_IB01
+#define DISP_BITMASK_WM0 DISP_BIT_IB00
+/* DISP_RAM_DATA_MASK_2_ADDR RAM Write Data Mask (2) */
+#define DISP_BITMASK_WM17 DISP_BIT_IB05
+#define DISP_BITMASK_WM16 DISP_BIT_IB04
+#define DISP_BITMASK_WM15 DISP_BIT_IB03
+#define DISP_BITMASK_WM14 DISP_BIT_IB02
+#define DISP_BITMASK_WM13 DISP_BIT_IB01
+#define DISP_BITMASK_WM12 DISP_BIT_IB00
+/*Gamma Control */
+/* DISP_GAMMA_CONTROL_1_ADDR Gamma Control (1) */
+#define DISP_BITMASK_PKP12 DISP_BIT_IB10
+#define DISP_BITMASK_PKP11 DISP_BIT_IB08
+#define DISP_BITMASK_PKP10 DISP_BIT_IB09
+#define DISP_BITMASK_PKP02 DISP_BIT_IB02
+#define DISP_BITMASK_PKP01 DISP_BIT_IB01
+#define DISP_BITMASK_PKP00 DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_2_ADDR Gamma Control (2) */
+#define DISP_BITMASK_PKP32 DISP_BIT_IB10
+#define DISP_BITMASK_PKP31 DISP_BIT_IB09
+#define DISP_BITMASK_PKP30 DISP_BIT_IB08
+#define DISP_BITMASK_PKP22 DISP_BIT_IB02
+#define DISP_BITMASK_PKP21 DISP_BIT_IB01
+#define DISP_BITMASK_PKP20 DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_3_ADDR Gamma Control (3) */
+#define DISP_BITMASK_PKP52 DISP_BIT_IB10
+#define DISP_BITMASK_PKP51 DISP_BIT_IB09
+#define DISP_BITMASK_PKP50 DISP_BIT_IB08
+#define DISP_BITMASK_PKP42 DISP_BIT_IB02
+#define DISP_BITMASK_PKP41 DISP_BIT_IB01
+#define DISP_BITMASK_PKP40 DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_4_ADDR Gamma Control (4) */
+#define DISP_BITMASK_PRP12 DISP_BIT_IB10
+#define DISP_BITMASK_PRP11 DISP_BIT_IB08
+#define DISP_BITMASK_PRP10 DISP_BIT_IB09
+#define DISP_BITMASK_PRP02 DISP_BIT_IB02
+#define DISP_BITMASK_PRP01 DISP_BIT_IB01
+#define DISP_BITMASK_PRP00 DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_5_ADDR Gamma Control (5) */
+#define DISP_BITMASK_VRP14 DISP_BIT_IB12
+#define DISP_BITMASK_VRP13 DISP_BIT_IB11
+#define DISP_BITMASK_VRP12 DISP_BIT_IB10
+#define DISP_BITMASK_VRP11 DISP_BIT_IB08
+#define DISP_BITMASK_VRP10 DISP_BIT_IB09
+#define DISP_BITMASK_VRP03 DISP_BIT_IB03
+#define DISP_BITMASK_VRP02 DISP_BIT_IB02
+#define DISP_BITMASK_VRP01 DISP_BIT_IB01
+#define DISP_BITMASK_VRP00 DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_6_ADDR Gamma Control (6) */
+#define DISP_BITMASK_PKN12 DISP_BIT_IB10
+#define DISP_BITMASK_PKN11 DISP_BIT_IB08
+#define DISP_BITMASK_PKN10 DISP_BIT_IB09
+#define DISP_BITMASK_PKN02 DISP_BIT_IB02
+#define DISP_BITMASK_PKN01 DISP_BIT_IB01
+#define DISP_BITMASK_PKN00 DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_7_ADDR Gamma Control (7) */
+#define DISP_BITMASK_PKN32 DISP_BIT_IB10
+#define DISP_BITMASK_PKN31 DISP_BIT_IB08
+#define DISP_BITMASK_PKN30 DISP_BIT_IB09
+#define DISP_BITMASK_PKN22 DISP_BIT_IB02
+#define DISP_BITMASK_PKN21 DISP_BIT_IB01
+#define DISP_BITMASK_PKN20 DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_8_ADDR Gamma Control (8) */
+#define DISP_BITMASK_PKN52 DISP_BIT_IB10
+#define DISP_BITMASK_PKN51 DISP_BIT_IB08
+#define DISP_BITMASK_PKN50 DISP_BIT_IB09
+#define DISP_BITMASK_PKN42 DISP_BIT_IB02
+#define DISP_BITMASK_PKN41 DISP_BIT_IB01
+#define DISP_BITMASK_PKN40 DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_9_ADDR Gamma Control (9) */
+#define DISP_BITMASK_PRN12 DISP_BIT_IB10
+#define DISP_BITMASK_PRN11 DISP_BIT_IB08
+#define DISP_BITMASK_PRN10 DISP_BIT_IB09
+#define DISP_BITMASK_PRN02 DISP_BIT_IB02
+#define DISP_BITMASK_PRN01 DISP_BIT_IB01
+#define DISP_BITMASK_PRN00 DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_10_ADDR Gamma Control (10) */
+#define DISP_BITMASK_VRN14 DISP_BIT_IB12
+#define DISP_BITMASK_VRN13 DISP_BIT_IB11
+#define DISP_BITMASK_VRN12 DISP_BIT_IB10
+#define DISP_BITMASK_VRN11 DISP_BIT_IB08
+#define DISP_BITMASK_VRN10 DISP_BIT_IB09
+#define DISP_BITMASK_VRN03 DISP_BIT_IB03
+#define DISP_BITMASK_VRN02 DISP_BIT_IB02
+#define DISP_BITMASK_VRN01 DISP_BIT_IB01
+#define DISP_BITMASK_VRN00 DISP_BIT_IB00
+/* Coordinate Control */
+/* DISP_VERT_SCROLL_CTL_1_ADDR Vertical Scroll Control (1) */
+#define DISP_BITMASK_VL18 DISP_BIT_IB08
+#define DISP_BITMASK_VL17 DISP_BIT_IB07
+#define DISP_BITMASK_VL16 DISP_BIT_IB06
+#define DISP_BITMASK_VL15 DISP_BIT_IB05
+#define DISP_BITMASK_VL14 DISP_BIT_IB04
+#define DISP_BITMASK_VL13 DISP_BIT_IB03
+#define DISP_BITMASK_VL12 DISP_BIT_IB02
+#define DISP_BITMASK_VL11 DISP_BIT_IB01
+#define DISP_BITMASK_VL10 DISP_BIT_IB00
+/* DISP_VERT_SCROLL_CTL_2_ADDR Vertical Scroll Control (2) */
+#define DISP_BITMASK_VL28 DISP_BIT_IB08
+#define DISP_BITMASK_VL27 DISP_BIT_IB07
+#define DISP_BITMASK_VL26 DISP_BIT_IB06
+#define DISP_BITMASK_VL25 DISP_BIT_IB05
+#define DISP_BITMASK_VL24 DISP_BIT_IB04
+#define DISP_BITMASK_VL23 DISP_BIT_IB03
+#define DISP_BITMASK_VL22 DISP_BIT_IB02
+#define DISP_BITMASK_VL21 DISP_BIT_IB01
+#define DISP_BITMASK_VL20 DISP_BIT_IB00
+/* DISP_SCREEN_1_DRV_POS_1_ADDR First Screen Driving Position (1) */
+#define DISP_BITMASK_SS18 DISP_BIT_IB08
+#define DISP_BITMASK_SS17 DISP_BIT_IB07
+#define DISP_BITMASK_SS16 DISP_BIT_IB06
+#define DISP_BITMASK_SS15 DISP_BIT_IB05
+#define DISP_BITMASK_SS14 DISP_BIT_IB04
+#define DISP_BITMASK_SS13 DISP_BIT_IB03
+#define DISP_BITMASK_SS12 DISP_BIT_IB02
+#define DISP_BITMASK_SS11 DISP_BIT_IB01
+#define DISP_BITMASK_SS10 DISP_BIT_IB00
+/* DISP_SCREEN_1_DRV_POS_2_ADDR First Screen Driving Position (2) */
+#define DISP_BITMASK_SE18 DISP_BIT_IB08
+#define DISP_BITMASK_SE17 DISP_BIT_IB07
+#define DISP_BITMASK_SE16 DISP_BIT_IB06
+#define DISP_BITMASK_SE15 DISP_BIT_IB05
+#define DISP_BITMASK_SE14 DISP_BIT_IB04
+#define DISP_BITMASK_SE13 DISP_BIT_IB03
+#define DISP_BITMASK_SE12 DISP_BIT_IB02
+#define DISP_BITMASK_SE11 DISP_BIT_IB01
+#define DISP_BITMASK_SE10 DISP_BIT_IB00
+/* DISP_SCREEN_2_DRV_POS_1_ADDR Second Screen Driving Position (1) */
+#define DISP_BITMASK_SS28 DISP_BIT_IB08
+#define DISP_BITMASK_SS27 DISP_BIT_IB07
+#define DISP_BITMASK_SS26 DISP_BIT_IB06
+#define DISP_BITMASK_SS25 DISP_BIT_IB05
+#define DISP_BITMASK_SS24 DISP_BIT_IB04
+#define DISP_BITMASK_SS23 DISP_BIT_IB03
+#define DISP_BITMASK_SS22 DISP_BIT_IB02
+#define DISP_BITMASK_SS21 DISP_BIT_IB01
+#define DISP_BITMASK_SS20 DISP_BIT_IB00
+/* DISP_SCREEN_3_DRV_POS_2_ADDR Second Screen Driving Position (2) */
+#define DISP_BITMASK_SE28 DISP_BIT_IB08
+#define DISP_BITMASK_SE27 DISP_BIT_IB07
+#define DISP_BITMASK_SE26 DISP_BIT_IB06
+#define DISP_BITMASK_SE25 DISP_BIT_IB05
+#define DISP_BITMASK_SE24 DISP_BIT_IB04
+#define DISP_BITMASK_SE23 DISP_BIT_IB03
+#define DISP_BITMASK_SE22 DISP_BIT_IB02
+#define DISP_BITMASK_SE21 DISP_BIT_IB01
+#define DISP_BITMASK_SE20 DISP_BIT_IB00
+/* DISP_HORZ_RAM_ADDR_POS_1_ADDR Horizontal RAM Address Position (1) */
+#define DISP_BITMASK_HSA7 DISP_BIT_IB07
+#define DISP_BITMASK_HSA6 DISP_BIT_IB06
+#define DISP_BITMASK_HSA5 DISP_BIT_IB05
+#define DISP_BITMASK_HSA4 DISP_BIT_IB04
+#define DISP_BITMASK_HSA3 DISP_BIT_IB03
+#define DISP_BITMASK_HSA2 DISP_BIT_IB02
+#define DISP_BITMASK_HSA1 DISP_BIT_IB01
+#define DISP_BITMASK_HSA0 DISP_BIT_IB00
+/* DISP_HORZ_RAM_ADDR_POS_2_ADDR Horizontal RAM Address Position (2) */
+#define DISP_BITMASK_HEA7 DISP_BIT_IB07
+#define DISP_BITMASK_HEA6 DISP_BIT_IB06
+#define DISP_BITMASK_HEA5 DISP_BIT_IB05
+#define DISP_BITMASK_HEA4 DISP_BIT_IB04
+#define DISP_BITMASK_HEA3 DISP_BIT_IB03
+#define DISP_BITMASK_HEA2 DISP_BIT_IB02
+#define DISP_BITMASK_HEA1 DISP_BIT_IB01
+#define DISP_BITMASK_HEA0 DISP_BIT_IB00
+/* DISP_VERT_RAM_ADDR_POS_1_ADDR Vertical RAM Address Position (1) */
+#define DISP_BITMASK_VSA8 DISP_BIT_IB08
+#define DISP_BITMASK_VSA7 DISP_BIT_IB07
+#define DISP_BITMASK_VSA6 DISP_BIT_IB06
+#define DISP_BITMASK_VSA5 DISP_BIT_IB05
+#define DISP_BITMASK_VSA4 DISP_BIT_IB04
+#define DISP_BITMASK_VSA3 DISP_BIT_IB03
+#define DISP_BITMASK_VSA2 DISP_BIT_IB02
+#define DISP_BITMASK_VSA1 DISP_BIT_IB01
+#define DISP_BITMASK_VSA0 DISP_BIT_IB00
+/* DISP_VERT_RAM_ADDR_POS_2_ADDR Vertical RAM Address Position (2) */
+#define DISP_BITMASK_VEA8 DISP_BIT_IB08
+#define DISP_BITMASK_VEA7 DISP_BIT_IB07
+#define DISP_BITMASK_VEA6 DISP_BIT_IB06
+#define DISP_BITMASK_VEA5 DISP_BIT_IB05
+#define DISP_BITMASK_VEA4 DISP_BIT_IB04
+#define DISP_BITMASK_VEA3 DISP_BIT_IB03
+#define DISP_BITMASK_VEA2 DISP_BIT_IB02
+#define DISP_BITMASK_VEA1 DISP_BIT_IB01
+#define DISP_BITMASK_VEA0 DISP_BIT_IB00
+static word disp_area_start_row;
+static word disp_area_end_row;
+static boolean disp_initialized = FALSE;
+/* For some reason the contrast set at init time is not good. Need to do
+* it again
+*/
+static boolean display_on = FALSE;
+
+static uint32 tmd20qvga_lcd_rev;
+uint16 tmd20qvga_panel_offset;
+
+#ifdef DISP_DEVICE_8BPP
+static word convert_8_to_16_tbl[256] = {
+ 0x0000, 0x2000, 0x4000, 0x6000, 0x8000, 0xA000, 0xC000, 0xE000,
+ 0x0100, 0x2100, 0x4100, 0x6100, 0x8100, 0xA100, 0xC100, 0xE100,
+ 0x0200, 0x2200, 0x4200, 0x6200, 0x8200, 0xA200, 0xC200, 0xE200,
+ 0x0300, 0x2300, 0x4300, 0x6300, 0x8300, 0xA300, 0xC300, 0xE300,
+ 0x0400, 0x2400, 0x4400, 0x6400, 0x8400, 0xA400, 0xC400, 0xE400,
+ 0x0500, 0x2500, 0x4500, 0x6500, 0x8500, 0xA500, 0xC500, 0xE500,
+ 0x0600, 0x2600, 0x4600, 0x6600, 0x8600, 0xA600, 0xC600, 0xE600,
+ 0x0700, 0x2700, 0x4700, 0x6700, 0x8700, 0xA700, 0xC700, 0xE700,
+ 0x0008, 0x2008, 0x4008, 0x6008, 0x8008, 0xA008, 0xC008, 0xE008,
+ 0x0108, 0x2108, 0x4108, 0x6108, 0x8108, 0xA108, 0xC108, 0xE108,
+ 0x0208, 0x2208, 0x4208, 0x6208, 0x8208, 0xA208, 0xC208, 0xE208,
+ 0x0308, 0x2308, 0x4308, 0x6308, 0x8308, 0xA308, 0xC308, 0xE308,
+ 0x0408, 0x2408, 0x4408, 0x6408, 0x8408, 0xA408, 0xC408, 0xE408,
+ 0x0508, 0x2508, 0x4508, 0x6508, 0x8508, 0xA508, 0xC508, 0xE508,
+ 0x0608, 0x2608, 0x4608, 0x6608, 0x8608, 0xA608, 0xC608, 0xE608,
+ 0x0708, 0x2708, 0x4708, 0x6708, 0x8708, 0xA708, 0xC708, 0xE708,
+ 0x0010, 0x2010, 0x4010, 0x6010, 0x8010, 0xA010, 0xC010, 0xE010,
+ 0x0110, 0x2110, 0x4110, 0x6110, 0x8110, 0xA110, 0xC110, 0xE110,
+ 0x0210, 0x2210, 0x4210, 0x6210, 0x8210, 0xA210, 0xC210, 0xE210,
+ 0x0310, 0x2310, 0x4310, 0x6310, 0x8310, 0xA310, 0xC310, 0xE310,
+ 0x0410, 0x2410, 0x4410, 0x6410, 0x8410, 0xA410, 0xC410, 0xE410,
+ 0x0510, 0x2510, 0x4510, 0x6510, 0x8510, 0xA510, 0xC510, 0xE510,
+ 0x0610, 0x2610, 0x4610, 0x6610, 0x8610, 0xA610, 0xC610, 0xE610,
+ 0x0710, 0x2710, 0x4710, 0x6710, 0x8710, 0xA710, 0xC710, 0xE710,
+ 0x0018, 0x2018, 0x4018, 0x6018, 0x8018, 0xA018, 0xC018, 0xE018,
+ 0x0118, 0x2118, 0x4118, 0x6118, 0x8118, 0xA118, 0xC118, 0xE118,
+ 0x0218, 0x2218, 0x4218, 0x6218, 0x8218, 0xA218, 0xC218, 0xE218,
+ 0x0318, 0x2318, 0x4318, 0x6318, 0x8318, 0xA318, 0xC318, 0xE318,
+ 0x0418, 0x2418, 0x4418, 0x6418, 0x8418, 0xA418, 0xC418, 0xE418,
+ 0x0518, 0x2518, 0x4518, 0x6518, 0x8518, 0xA518, 0xC518, 0xE518,
+ 0x0618, 0x2618, 0x4618, 0x6618, 0x8618, 0xA618, 0xC618, 0xE618,
+ 0x0718, 0x2718, 0x4718, 0x6718, 0x8718, 0xA718, 0xC718, 0xE718
+};
+#endif /* DISP_DEVICE_8BPP */
+
+static void tmd20qvga_disp_set_rect(int x, int y, int xres, int yres);
+static void tmd20qvga_disp_init(struct platform_device *pdev);
+static void tmd20qvga_disp_set_contrast(void);
+static void tmd20qvga_disp_set_display_area(word start_row, word end_row);
+static int tmd20qvga_disp_off(struct platform_device *pdev);
+static int tmd20qvga_disp_on(struct platform_device *pdev);
+static void tmd20qvga_set_revId(int);
+
+/* future use */
+void tmd20qvga_disp_clear_screen_area(word start_row, word end_row,
+ word start_column, word end_column);
+
+static void tmd20qvga_set_revId(int id)
+{
+
+ tmd20qvga_lcd_rev = id;
+
+ if (tmd20qvga_lcd_rev == 1)
+ tmd20qvga_panel_offset = 0x10;
+ else
+ tmd20qvga_panel_offset = 0;
+}
+
+static void tmd20qvga_disp_init(struct platform_device *pdev)
+{
+ struct msm_fb_data_type *mfd;
+
+ if (disp_initialized)
+ return;
+
+ mfd = platform_get_drvdata(pdev);
+
+ DISP_CMD_PORT = mfd->cmd_port;
+ DISP_DATA_PORT = mfd->data_port;
+
+#ifdef TMD20QVGA_LCD_18BPP
+ tmd20qvga_set_revId(2);
+#else
+ tmd20qvga_set_revId(1);
+#endif
+
+ disp_initialized = TRUE;
+ tmd20qvga_disp_set_contrast();
+ tmd20qvga_disp_set_display_area(0, QVGA_HEIGHT - 1);
+}
+
+static void tmd20qvga_disp_set_rect(int x, int y, int xres, int yres)
+{
+ if (!disp_initialized)
+ return;
+
+ DISP_SET_RECT(y, y + yres - 1, x, x + xres - 1);
+
+ DISP_CMD_OUT(DISP_CMD_RAMWR);
+}
+
+static void tmd20qvga_disp_set_display_area(word start_row, word end_row)
+{
+ word start_driving = start_row;
+ word end_driving = end_row;
+
+ if (!disp_initialized)
+ return;
+
+ /* Range checking
+ */
+ if (end_driving >= QVGA_HEIGHT)
+ end_driving = QVGA_HEIGHT - 1;
+ if (start_driving > end_driving) {
+ /* Probably Backwards Switch */
+ start_driving = end_driving;
+ end_driving = start_row; /* Has not changed */
+ if (end_driving >= QVGA_HEIGHT)
+ end_driving = QVGA_HEIGHT - 1;
+ }
+
+ if ((start_driving == disp_area_start_row)
+ && (end_driving == disp_area_end_row))
+ return;
+
+ disp_area_start_row = start_driving;
+ disp_area_end_row = end_driving;
+
+ DISP_WRITE_OUT(DISP_SCREEN_1_DRV_POS_1_ADDR,
+ DISP_VAL_IF(start_driving & 0x100,
+ DISP_BITMASK_SS18) |
+ DISP_VAL_IF(start_driving & 0x080,
+ DISP_BITMASK_SS17) |
+ DISP_VAL_IF(start_driving & 0x040,
+ DISP_BITMASK_SS16) |
+ DISP_VAL_IF(start_driving & 0x020,
+ DISP_BITMASK_SS15) |
+ DISP_VAL_IF(start_driving & 0x010,
+ DISP_BITMASK_SS14) |
+ DISP_VAL_IF(start_driving & 0x008,
+ DISP_BITMASK_SS13) |
+ DISP_VAL_IF(start_driving & 0x004,
+ DISP_BITMASK_SS12) |
+ DISP_VAL_IF(start_driving & 0x002,
+ DISP_BITMASK_SS11) |
+ DISP_VAL_IF(start_driving & 0x001, DISP_BITMASK_SS10));
+
+ DISP_WRITE_OUT(DISP_SCREEN_1_DRV_POS_2_ADDR,
+ DISP_VAL_IF(end_driving & 0x100, DISP_BITMASK_SE18) |
+ DISP_VAL_IF(end_driving & 0x080, DISP_BITMASK_SE17) |
+ DISP_VAL_IF(end_driving & 0x040, DISP_BITMASK_SE16) |
+ DISP_VAL_IF(end_driving & 0x020, DISP_BITMASK_SE15) |
+ DISP_VAL_IF(end_driving & 0x010, DISP_BITMASK_SE14) |
+ DISP_VAL_IF(end_driving & 0x008, DISP_BITMASK_SE13) |
+ DISP_VAL_IF(end_driving & 0x004, DISP_BITMASK_SE12) |
+ DISP_VAL_IF(end_driving & 0x002, DISP_BITMASK_SE11) |
+ DISP_VAL_IF(end_driving & 0x001, DISP_BITMASK_SE10));
+}
+
+static int tmd20qvga_disp_off(struct platform_device *pdev)
+{
+ if (!disp_initialized)
+ tmd20qvga_disp_init(pdev);
+
+ if (display_on) {
+ if (tmd20qvga_lcd_rev == 2) {
+ DISP_WRITE_OUT(DISP_POFF_LN_SETTING_ADDR, 0x000A);
+ DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0xFFEE);
+ WAIT_MSEC(40);
+ DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0xF812);
+ WAIT_MSEC(40);
+ DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0xE811);
+ WAIT_MSEC(40);
+ DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0xC011);
+ WAIT_MSEC(40);
+ DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x4011);
+ WAIT_MSEC(20);
+ DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0010);
+
+ } else {
+ DISP_WRITE_OUT(DISP_POFF_LN_SETTING_ADDR, 0x000F);
+ DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0BFE);
+ DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+ WAIT_MSEC(40);
+ DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0BED);
+ DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+ WAIT_MSEC(40);
+ DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x00CD);
+ DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+ WAIT_MSEC(20);
+ DISP_WRITE_OUT(DISP_START_OSCILLATION_ADDR, 0x0);
+ }
+
+ DISP_WRITE_OUT(DISP_MODE_SETTING_ADDR, 0x0004);
+ DISP_WRITE_OUT(DISP_MODE_SETTING_ADDR, 0x0000);
+
+ display_on = FALSE;
+ }
+
+ return 0;
+}
+
+static int tmd20qvga_disp_on(struct platform_device *pdev)
+{
+ if (!disp_initialized)
+ tmd20qvga_disp_init(pdev);
+
+ if (!display_on) {
+ /* Deep Stand-by -> Stand-by */
+ DISP_CMD_OUT(DISP_START_OSCILLATION_ADDR);
+ WAIT_MSEC(1);
+ DISP_CMD_OUT(DISP_START_OSCILLATION_ADDR);
+ WAIT_MSEC(1);
+ DISP_CMD_OUT(DISP_START_OSCILLATION_ADDR);
+ WAIT_MSEC(1);
+
+ /* OFF -> Deep Stan-By -> Stand-by */
+ /* let's change the state from "Stand-by" to "Sleep" */
+ DISP_WRITE_OUT(DISP_MODE_SETTING_ADDR, 0x0005);
+ WAIT_MSEC(1);
+
+ /* Sleep -> Displaying */
+ DISP_WRITE_OUT(DISP_START_OSCILLATION_ADDR, 0x0001);
+ DISP_WRITE_OUT(DISP_DRIVER_OUTPUT_CTL_ADDR, 0x0127);
+ DISP_WRITE_OUT(DISP_LCD_DRIVING_SIG_ADDR, 0x200);
+ /* fast write mode */
+ DISP_WRITE_OUT(DISP_ENTRY_MODE_ADDR, 0x0130);
+ if (tmd20qvga_lcd_rev == 2)
+ DISP_WRITE_OUT(DISP_TMD_700_ADDR, 0x0003);
+ /* back porch = 14 + front porch = 2 --> 16 lines */
+ if (tmd20qvga_lcd_rev == 2) {
+#ifdef TMD20QVGA_LCD_18BPP
+ /* 256k color */
+ DISP_WRITE_OUT(DISP_DISPLAY_CTL_1_ADDR, 0x0000);
+#else
+ /* 65k color */
+ DISP_WRITE_OUT(DISP_DISPLAY_CTL_1_ADDR, 0x4000);
+#endif
+ DISP_WRITE_OUT(DISP_DISPLAY_CTL_2_ADDR, 0x0302);
+ } else {
+#ifdef TMD20QVGA_LCD_18BPP
+ /* 256k color */
+ DISP_WRITE_OUT(DISP_DISPLAY_CTL_1_ADDR, 0x0004);
+#else
+ /* 65k color */
+ DISP_WRITE_OUT(DISP_DISPLAY_CTL_1_ADDR, 0x4004);
+#endif
+ DISP_WRITE_OUT(DISP_DISPLAY_CTL_2_ADDR, 0x020E);
+ }
+ /* 16 bit one transfer */
+ if (tmd20qvga_lcd_rev == 2) {
+ DISP_WRITE_OUT(DISP_EXT_DISPLAY_CTL_1_ADDR, 0x0000);
+ DISP_WRITE_OUT(DISP_FRAME_CYCLE_CTL_ADDR, 0x0010);
+ DISP_WRITE_OUT(DISP_LTPS_CTL_1_ADDR, 0x0302);
+ DISP_WRITE_OUT(DISP_LTPS_CTL_2_ADDR, 0x0102);
+ DISP_WRITE_OUT(DISP_LTPS_CTL_3_ADDR, 0x0000);
+ DISP_WRITE_OUT(DISP_TMD_015_ADDR, 0x2000);
+
+ DISP_WRITE_OUT(DISP_AMP_SETTING_ADDR, 0x0000);
+ DISP_WRITE_OUT(DISP_GAMMA_CONTROL_1_ADDR, 0x0403);
+ DISP_WRITE_OUT(DISP_GAMMA_CONTROL_2_ADDR, 0x0304);
+ DISP_WRITE_OUT(DISP_GAMMA_CONTROL_3_ADDR, 0x0403);
+ DISP_WRITE_OUT(DISP_GAMMA_CONTROL_4_ADDR, 0x0303);
+ DISP_WRITE_OUT(DISP_GAMMA_CONTROL_5_ADDR, 0x0101);
+ DISP_WRITE_OUT(DISP_TMD_305_ADDR, 0);
+
+ DISP_WRITE_OUT(DISP_SCREEN_1_DRV_POS_1_ADDR, 0x0000);
+ DISP_WRITE_OUT(DISP_SCREEN_1_DRV_POS_2_ADDR, 0x013F);
+
+ DISP_WRITE_OUT(DISP_POWER_CTL_3_ADDR, 0x077D);
+
+ DISP_WRITE_OUT(DISP_POWER_CTL_4_ADDR, 0x0005);
+ DISP_WRITE_OUT(DISP_POWER_CTL_5_ADDR, 0x0000);
+ DISP_WRITE_OUT(DISP_POWER_CTL_6_ADDR, 0x0015);
+ DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0xC010);
+ WAIT_MSEC(1);
+
+ DISP_WRITE_OUT(DISP_POWER_CTL_2_ADDR, 0x0001);
+ DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0xFFFE);
+ WAIT_MSEC(60);
+ } else {
+ DISP_WRITE_OUT(DISP_EXT_DISPLAY_CTL_1_ADDR, 0x0001);
+ DISP_WRITE_OUT(DISP_FRAME_CYCLE_CTL_ADDR, 0x0010);
+ DISP_WRITE_OUT(DISP_LTPS_CTL_1_ADDR, 0x0301);
+ DISP_WRITE_OUT(DISP_LTPS_CTL_2_ADDR, 0x0001);
+ DISP_WRITE_OUT(DISP_LTPS_CTL_3_ADDR, 0x0000);
+ DISP_WRITE_OUT(DISP_AMP_SETTING_ADDR, 0x0000);
+ DISP_WRITE_OUT(DISP_GAMMA_CONTROL_1_ADDR, 0x0507);
+ DISP_WRITE_OUT(DISP_GAMMA_CONTROL_2_ADDR, 0x0405);
+ DISP_WRITE_OUT(DISP_GAMMA_CONTROL_3_ADDR, 0x0607);
+ DISP_WRITE_OUT(DISP_GAMMA_CONTROL_4_ADDR, 0x0502);
+ DISP_WRITE_OUT(DISP_GAMMA_CONTROL_5_ADDR, 0x0301);
+ DISP_WRITE_OUT(DISP_SCREEN_1_DRV_POS_1_ADDR, 0x0000);
+ DISP_WRITE_OUT(DISP_SCREEN_1_DRV_POS_2_ADDR, 0x013F);
+ DISP_WRITE_OUT(DISP_POWER_CTL_3_ADDR, 0x0795);
+
+ DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0102);
+ WAIT_MSEC(1);
+
+ DISP_WRITE_OUT(DISP_POWER_CTL_4_ADDR, 0x0450);
+ DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0103);
+ WAIT_MSEC(1);
+
+ DISP_WRITE_OUT(DISP_POWER_CTL_5_ADDR, 0x0008);
+ DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0104);
+ WAIT_MSEC(1);
+
+ DISP_WRITE_OUT(DISP_POWER_CTL_6_ADDR, 0x0C00);
+ DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0105);
+ WAIT_MSEC(1);
+
+ DISP_WRITE_OUT(DISP_POWER_CTL_7_ADDR, 0x0000);
+ DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0106);
+ WAIT_MSEC(1);
+
+ DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0801);
+ DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+ WAIT_MSEC(1);
+
+ DISP_WRITE_OUT(DISP_POWER_CTL_2_ADDR, 0x001F);
+ DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0101);
+ WAIT_MSEC(60);
+
+ DISP_WRITE_OUT(DISP_POWER_CTL_2_ADDR, 0x009F);
+ DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0101);
+ WAIT_MSEC(10);
+
+ DISP_WRITE_OUT(DISP_HORZ_RAM_ADDR_POS_1_ADDR, 0x0010);
+ DISP_WRITE_OUT(DISP_HORZ_RAM_ADDR_POS_2_ADDR, 0x00FF);
+ DISP_WRITE_OUT(DISP_VERT_RAM_ADDR_POS_1_ADDR, 0x0000);
+ DISP_WRITE_OUT(DISP_VERT_RAM_ADDR_POS_2_ADDR, 0x013F);
+ /* RAM starts at address 0x10 */
+ DISP_WRITE_OUT(DISP_RAM_ADDR_SET_1_ADDR, 0x0010);
+ DISP_WRITE_OUT(DISP_RAM_ADDR_SET_2_ADDR, 0x0000);
+
+ /* lcd controller uses internal clock, not ext. vsync */
+ DISP_CMD_OUT(DISP_CMD_RAMWR);
+
+ DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0881);
+ DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+ WAIT_MSEC(40);
+
+ DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0BE1);
+ DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+ WAIT_MSEC(40);
+
+ DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0BFF);
+ DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+ }
+ display_on = TRUE;
+ }
+
+ return 0;
+}
+
+static void tmd20qvga_disp_set_contrast(void)
+{
+#if (defined(TMD20QVGA_LCD_18BPP))
+
+ DISP_WRITE_OUT(DISP_GAMMA_CONTROL_1_ADDR, 0x0403);
+ DISP_WRITE_OUT(DISP_GAMMA_CONTROL_2_ADDR, 0x0302);
+ DISP_WRITE_OUT(DISP_GAMMA_CONTROL_3_ADDR, 0x0403);
+ DISP_WRITE_OUT(DISP_GAMMA_CONTROL_4_ADDR, 0x0303);
+ DISP_WRITE_OUT(DISP_GAMMA_CONTROL_5_ADDR, 0x0F07);
+
+#else
+ int newcontrast = 0x46;
+
+ DISP_WRITE_OUT(DISP_GAMMA_CONTROL_1_ADDR, 0x0403);
+
+ DISP_WRITE_OUT(DISP_GAMMA_CONTROL_2_ADDR,
+ DISP_VAL_IF(newcontrast & 0x0001, DISP_BITMASK_PKP20) |
+ DISP_VAL_IF(newcontrast & 0x0002, DISP_BITMASK_PKP21) |
+ DISP_VAL_IF(newcontrast & 0x0004, DISP_BITMASK_PKP22) |
+ DISP_VAL_IF(newcontrast & 0x0010, DISP_BITMASK_PKP30) |
+ DISP_VAL_IF(newcontrast & 0x0020, DISP_BITMASK_PKP31) |
+ DISP_VAL_IF(newcontrast & 0x0040, DISP_BITMASK_PKP32));
+
+ DISP_WRITE_OUT(DISP_GAMMA_CONTROL_3_ADDR,
+ DISP_VAL_IF(newcontrast & 0x0010, DISP_BITMASK_PKP40) |
+ DISP_VAL_IF(newcontrast & 0x0020, DISP_BITMASK_PKP41) |
+ DISP_VAL_IF(newcontrast & 0x0040, DISP_BITMASK_PKP42) |
+ DISP_VAL_IF(newcontrast & 0x0001, DISP_BITMASK_PKP50) |
+ DISP_VAL_IF(newcontrast & 0x0002, DISP_BITMASK_PKP51) |
+ DISP_VAL_IF(newcontrast & 0x0004, DISP_BITMASK_PKP52));
+
+ DISP_WRITE_OUT(DISP_GAMMA_CONTROL_4_ADDR, 0x0303);
+ DISP_WRITE_OUT(DISP_GAMMA_CONTROL_5_ADDR, 0x0F07);
+
+#endif /* defined(TMD20QVGA_LCD_18BPP) */
+
+} /* End disp_set_contrast */
+
+void tmd20qvga_disp_clear_screen_area
+ (word start_row, word end_row, word start_column, word end_column) {
+ int32 i;
+
+ /* Clear the display screen */
+ DISP_SET_RECT(start_row, end_row, start_column, end_column);
+ DISP_CMD_OUT(DISP_CMD_RAMWR);
+ i = (end_row - start_row + 1) * (end_column - start_column + 1);
+ for (; i > 0; i--)
+ DISP_DATA_OUT_16TO18BPP(0x0);
+}
+
+static int __init tmd20qvga_probe(struct platform_device *pdev)
+{
+ msm_fb_add_device(pdev);
+
+ return 0;
+}
+
+static struct platform_driver this_driver = {
+ .probe = tmd20qvga_probe,
+ .driver = {
+ .name = "ebi2_tmd_qvga",
+ },
+};
+
+static struct msm_fb_panel_data tmd20qvga_panel_data = {
+ .on = tmd20qvga_disp_on,
+ .off = tmd20qvga_disp_off,
+ .set_rect = tmd20qvga_disp_set_rect,
+};
+
+static struct platform_device this_device = {
+ .name = "ebi2_tmd_qvga",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmd20qvga_panel_data,
+ }
+};
+
+static int __init tmd20qvga_init(void)
+{
+ int ret;
+ struct msm_panel_info *pinfo;
+
+ ret = platform_driver_register(&this_driver);
+ if (!ret) {
+ pinfo = &tmd20qvga_panel_data.panel_info;
+ pinfo->xres = 240;
+ pinfo->yres = 320;
+ pinfo->type = EBI2_PANEL;
+ pinfo->pdest = DISPLAY_1;
+ pinfo->wait_cycle = 0x808000;
+#ifdef TMD20QVGA_LCD_18BPP
+ pinfo->bpp = 18;
+#else
+ pinfo->bpp = 16;
+#endif
+ pinfo->fb_num = 2;
+ pinfo->lcd.vsync_enable = TRUE;
+ pinfo->lcd.refx100 = 6000;
+ pinfo->lcd.v_back_porch = 16;
+ pinfo->lcd.v_front_porch = 4;
+ pinfo->lcd.v_pulse_width = 0;
+ pinfo->lcd.hw_vsync_mode = FALSE;
+ pinfo->lcd.vsync_notifier_period = 0;
+
+ ret = platform_device_register(&this_device);
+ if (ret)
+ platform_driver_unregister(&this_driver);
+ }
+
+ return ret;
+}
+
+module_init(tmd20qvga_init);
diff --git a/drivers/staging/msm/hdmi_sii9022.c b/drivers/staging/msm/hdmi_sii9022.c
new file mode 100644
index 0000000..6b82b56
--- /dev/null
+++ b/drivers/staging/msm/hdmi_sii9022.c
@@ -0,0 +1,248 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include "msm_fb.h"
+
+#define DEVICE_NAME "sii9022"
+#define SII9022_DEVICE_ID 0xB0
+
+struct sii9022_i2c_addr_data{
+ u8 addr;
+ u8 data;
+};
+
+/* video mode data */
+static u8 video_mode_data[] = {
+ 0x00,
+ 0xF9, 0x1C, 0x70, 0x17, 0x72, 0x06, 0xEE, 0x02,
+};
+
+static u8 avi_io_format[] = {
+ 0x09,
+ 0x00, 0x00,
+};
+
+/* power state */
+static struct sii9022_i2c_addr_data regset0[] = {
+ { 0x60, 0x04 },
+ { 0x63, 0x00 },
+ { 0x1E, 0x00 },
+};
+
+static u8 video_infoframe[] = {
+ 0x0C,
+ 0xF0, 0x00, 0x68, 0x00, 0x04, 0x00, 0x19, 0x00,
+ 0xE9, 0x02, 0x04, 0x01, 0x04, 0x06,
+};
+
+/* configure audio */
+static struct sii9022_i2c_addr_data regset1[] = {
+ { 0x26, 0x90 },
+ { 0x20, 0x90 },
+ { 0x1F, 0x80 },
+ { 0x26, 0x80 },
+ { 0x24, 0x02 },
+ { 0x25, 0x0B },
+ { 0xBC, 0x02 },
+ { 0xBD, 0x24 },
+ { 0xBE, 0x02 },
+};
+
+/* enable audio */
+static u8 misc_infoframe[] = {
+ 0xBF,
+ 0xC2, 0x84, 0x01, 0x0A, 0x6F, 0x02, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+/* set HDMI, active */
+static struct sii9022_i2c_addr_data regset2[] = {
+ { 0x1A, 0x01 },
+ { 0x3D, 0x00 },
+};
+
+static int send_i2c_data(struct i2c_client *client,
+ struct sii9022_i2c_addr_data *regset,
+ int size)
+{
+ int i;
+ int rc = 0;
+
+ for (i = 0; i < size; i++) {
+ rc = i2c_smbus_write_byte_data(
+ client,
+ regset[i].addr, regset[i].data);
+ if (rc)
+ break;
+ }
+ return rc;
+}
+
+static int hdmi_sii_enable(struct i2c_client *client)
+{
+ int rc;
+ int retries = 10;
+ int count;
+
+ rc = i2c_smbus_write_byte_data(client, 0xC7, 0x00);
+ if (rc)
+ goto enable_exit;
+
+ do {
+ msleep(1);
+ rc = i2c_smbus_read_byte_data(client, 0x1B);
+ } while ((rc != SII9022_DEVICE_ID) && retries--);
+
+ if (rc != SII9022_DEVICE_ID)
+ return -ENODEV;
+
+ rc = i2c_smbus_write_byte_data(client, 0x1A, 0x11);
+ if (rc)
+ goto enable_exit;
+
+ count = ARRAY_SIZE(video_mode_data);
+ rc = i2c_master_send(client, video_mode_data, count);
+ if (rc != count) {
+ rc = -EIO;
+ goto enable_exit;
+ }
+
+ rc = i2c_smbus_write_byte_data(client, 0x08, 0x20);
+ if (rc)
+ goto enable_exit;
+ count = ARRAY_SIZE(avi_io_format);
+ rc = i2c_master_send(client, avi_io_format, count);
+ if (rc != count) {
+ rc = -EIO;
+ goto enable_exit;
+ }
+
+ rc = send_i2c_data(client, regset0, ARRAY_SIZE(regset0));
+ if (rc)
+ goto enable_exit;
+
+ count = ARRAY_SIZE(video_infoframe);
+ rc = i2c_master_send(client, video_infoframe, count);
+ if (rc != count) {
+ rc = -EIO;
+ goto enable_exit;
+ }
+
+ rc = send_i2c_data(client, regset1, ARRAY_SIZE(regset1));
+ if (rc)
+ goto enable_exit;
+
+ count = ARRAY_SIZE(misc_infoframe);
+ rc = i2c_master_send(client, misc_infoframe, count);
+ if (rc != count) {
+ rc = -EIO;
+ goto enable_exit;
+ }
+
+ rc = send_i2c_data(client, regset2, ARRAY_SIZE(regset2));
+ if (rc)
+ goto enable_exit;
+
+ return 0;
+enable_exit:
+ printk(KERN_ERR "%s: exited rc=%d\n", __func__, rc);
+ return rc;
+}
+
+static const struct i2c_device_id hmdi_sii_id[] = {
+ { DEVICE_NAME, 0 },
+ { }
+};
+
+static int hdmi_sii_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int rc;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
+ return -ENODEV;
+ rc = hdmi_sii_enable(client);
+ return rc;
+}
+
+
+static struct i2c_driver hdmi_sii_i2c_driver = {
+ .driver = {
+ .name = DEVICE_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = hdmi_sii_probe,
+ .remove = __exit_p(hdmi_sii_remove),
+ .id_table = hmdi_sii_id,
+};
+
+static int __init hdmi_sii_init(void)
+{
+ int ret;
+ struct msm_panel_info pinfo;
+
+ if (msm_fb_detect_client("hdmi_sii9022"))
+ return 0;
+
+ pinfo.xres = 1280;
+ pinfo.yres = 720;
+ pinfo.type = HDMI_PANEL;
+ pinfo.pdest = DISPLAY_1;
+ pinfo.wait_cycle = 0;
+ pinfo.bpp = 24;
+ pinfo.fb_num = 2;
+ pinfo.clk_rate = 74250000;
+
+ pinfo.lcdc.h_back_porch = 124;
+ pinfo.lcdc.h_front_porch = 110;
+ pinfo.lcdc.h_pulse_width = 136;
+ pinfo.lcdc.v_back_porch = 19;
+ pinfo.lcdc.v_front_porch = 5;
+ pinfo.lcdc.v_pulse_width = 6;
+ pinfo.lcdc.border_clr = 0;
+ pinfo.lcdc.underflow_clr = 0xff;
+ pinfo.lcdc.hsync_skew = 0;
+
+ ret = lcdc_device_register(&pinfo);
+ if (ret) {
+ printk(KERN_ERR "%s: failed to register device\n", __func__);
+ goto init_exit;
+ }
+
+ ret = i2c_add_driver(&hdmi_sii_i2c_driver);
+ if (ret)
+ printk(KERN_ERR "%s: failed to add i2c driver\n", __func__);
+
+init_exit:
+ return ret;
+}
+
+static void __exit hdmi_sii_exit(void)
+{
+ i2c_del_driver(&hdmi_sii_i2c_driver);
+}
+
+module_init(hdmi_sii_init);
+module_exit(hdmi_sii_exit);
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.1");
+MODULE_AUTHOR("Qualcomm Innovation Center, Inc.");
+MODULE_DESCRIPTION("SiI9022 HDMI driver");
+MODULE_ALIAS("platform:hdmi-sii9022");
diff --git a/drivers/staging/msm/lcdc.c b/drivers/staging/msm/lcdc.c
new file mode 100644
index 0000000..735280a
--- /dev/null
+++ b/drivers/staging/msm/lcdc.c
@@ -0,0 +1,239 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/pm_qos_params.h>
+
+#include "msm_fb.h"
+
+static int lcdc_probe(struct platform_device *pdev);
+static int lcdc_remove(struct platform_device *pdev);
+
+static int lcdc_off(struct platform_device *pdev);
+static int lcdc_on(struct platform_device *pdev);
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+
+static struct clk *mdp_lcdc_pclk_clk;
+static struct clk *mdp_lcdc_pad_pclk_clk;
+
+int mdp_lcdc_pclk_clk_rate;
+int mdp_lcdc_pad_pclk_clk_rate;
+
+static struct platform_driver lcdc_driver = {
+ .probe = lcdc_probe,
+ .remove = lcdc_remove,
+ .suspend = NULL,
+ .resume = NULL,
+ .shutdown = NULL,
+ .driver = {
+ .name = "lcdc",
+ },
+};
+
+static struct lcdc_platform_data *lcdc_pdata;
+
+static int lcdc_off(struct platform_device *pdev)
+{
+ int ret = 0;
+
+ ret = panel_next_off(pdev);
+
+ clk_disable(mdp_lcdc_pclk_clk);
+ clk_disable(mdp_lcdc_pad_pclk_clk);
+
+ if (lcdc_pdata && lcdc_pdata->lcdc_power_save)
+ lcdc_pdata->lcdc_power_save(0);
+
+ if (lcdc_pdata && lcdc_pdata->lcdc_gpio_config)
+ ret = lcdc_pdata->lcdc_gpio_config(0);
+
+// pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ , "lcdc",
+// PM_QOS_DEFAULT_VALUE);
+
+ return ret;
+}
+
+static int lcdc_on(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct msm_fb_data_type *mfd;
+ unsigned long panel_pixclock_freq , pm_qos_freq;
+
+ mfd = platform_get_drvdata(pdev);
+ panel_pixclock_freq = mfd->fbi->var.pixclock;
+
+ if (panel_pixclock_freq > 58000000)
+ /* pm_qos_freq should be in Khz */
+ pm_qos_freq = panel_pixclock_freq / 1000 ;
+ else
+ pm_qos_freq = 58000;
+
+// pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ , "lcdc",
+// pm_qos_freq);
+ mfd = platform_get_drvdata(pdev);
+
+ clk_enable(mdp_lcdc_pclk_clk);
+ clk_enable(mdp_lcdc_pad_pclk_clk);
+
+ if (lcdc_pdata && lcdc_pdata->lcdc_power_save)
+ lcdc_pdata->lcdc_power_save(1);
+ if (lcdc_pdata && lcdc_pdata->lcdc_gpio_config)
+ ret = lcdc_pdata->lcdc_gpio_config(1);
+
+ clk_set_rate(mdp_lcdc_pclk_clk, mfd->fbi->var.pixclock);
+ clk_set_rate(mdp_lcdc_pad_pclk_clk, mfd->fbi->var.pixclock);
+ mdp_lcdc_pclk_clk_rate = clk_get_rate(mdp_lcdc_pclk_clk);
+ mdp_lcdc_pad_pclk_clk_rate = clk_get_rate(mdp_lcdc_pad_pclk_clk);
+
+ ret = panel_next_on(pdev);
+ return ret;
+}
+
+static int lcdc_probe(struct platform_device *pdev)
+{
+ struct msm_fb_data_type *mfd;
+ struct fb_info *fbi;
+ struct platform_device *mdp_dev = NULL;
+ struct msm_fb_panel_data *pdata = NULL;
+ int rc;
+
+ if (pdev->id == 0) {
+ lcdc_pdata = pdev->dev.platform_data;
+ return 0;
+ }
+
+ mfd = platform_get_drvdata(pdev);
+
+ if (!mfd)
+ return -ENODEV;
+
+ if (mfd->key != MFD_KEY)
+ return -EINVAL;
+
+ if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+ return -ENOMEM;
+
+ mdp_dev = platform_device_alloc("mdp", pdev->id);
+ if (!mdp_dev)
+ return -ENOMEM;
+
+ /*
+ * link to the latest pdev
+ */
+ mfd->pdev = mdp_dev;
+ mfd->dest = DISPLAY_LCDC;
+
+ /*
+ * alloc panel device data
+ */
+ if (platform_device_add_data
+ (mdp_dev, pdev->dev.platform_data,
+ sizeof(struct msm_fb_panel_data))) {
+ printk(KERN_ERR "lcdc_probe: platform_device_add_data failed!\n");
+ platform_device_put(mdp_dev);
+ return -ENOMEM;
+ }
+ /*
+ * data chain
+ */
+ pdata = (struct msm_fb_panel_data *)mdp_dev->dev.platform_data;
+ pdata->on = lcdc_on;
+ pdata->off = lcdc_off;
+ pdata->next = pdev;
+
+ /*
+ * get/set panel specific fb info
+ */
+ mfd->panel_info = pdata->panel_info;
+ mfd->fb_imgType = MDP_RGB_565;
+
+ fbi = mfd->fbi;
+ fbi->var.pixclock = mfd->panel_info.clk_rate;
+ fbi->var.left_margin = mfd->panel_info.lcdc.h_back_porch;
+ fbi->var.right_margin = mfd->panel_info.lcdc.h_front_porch;
+ fbi->var.upper_margin = mfd->panel_info.lcdc.v_back_porch;
+ fbi->var.lower_margin = mfd->panel_info.lcdc.v_front_porch;
+ fbi->var.hsync_len = mfd->panel_info.lcdc.h_pulse_width;
+ fbi->var.vsync_len = mfd->panel_info.lcdc.v_pulse_width;
+
+ /*
+ * set driver data
+ */
+ platform_set_drvdata(mdp_dev, mfd);
+
+ /*
+ * register in mdp driver
+ */
+ rc = platform_device_add(mdp_dev);
+ if (rc)
+ goto lcdc_probe_err;
+
+ pdev_list[pdev_list_cnt++] = pdev;
+ return 0;
+
+lcdc_probe_err:
+ platform_device_put(mdp_dev);
+ return rc;
+}
+
+static int lcdc_remove(struct platform_device *pdev)
+{
+// pm_qos_remove_requirement(PM_QOS_SYSTEM_BUS_FREQ , "lcdc");
+ return 0;
+}
+
+static int lcdc_register_driver(void)
+{
+ return platform_driver_register(&lcdc_driver);
+}
+
+static int __init lcdc_driver_init(void)
+{
+ mdp_lcdc_pclk_clk = clk_get(NULL, "mdp_lcdc_pclk_clk");
+ if (IS_ERR(mdp_lcdc_pclk_clk)) {
+ printk(KERN_ERR "error: can't get mdp_lcdc_pclk_clk!\n");
+ return IS_ERR(mdp_lcdc_pclk_clk);
+ }
+ mdp_lcdc_pad_pclk_clk = clk_get(NULL, "mdp_lcdc_pad_pclk_clk");
+ if (IS_ERR(mdp_lcdc_pad_pclk_clk)) {
+ printk(KERN_ERR "error: can't get mdp_lcdc_pad_pclk_clk!\n");
+ return IS_ERR(mdp_lcdc_pad_pclk_clk);
+ }
+// pm_qos_add_requirement(PM_QOS_SYSTEM_BUS_FREQ , "lcdc",
+// PM_QOS_DEFAULT_VALUE);
+ return lcdc_register_driver();
+}
+
+module_init(lcdc_driver_init);
diff --git a/drivers/staging/msm/lcdc_external.c b/drivers/staging/msm/lcdc_external.c
new file mode 100644
index 0000000..45ff785
--- /dev/null
+++ b/drivers/staging/msm/lcdc_external.c
@@ -0,0 +1,54 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+static int __init lcdc_external_init(void)
+{
+ int ret;
+ struct msm_panel_info pinfo;
+
+ if (msm_fb_detect_client("lcdc_external"))
+ return 0;
+
+ pinfo.xres = 1280;
+ pinfo.yres = 720;
+ pinfo.type = LCDC_PANEL;
+ pinfo.pdest = DISPLAY_1;
+ pinfo.wait_cycle = 0;
+ pinfo.bpp = 24;
+ pinfo.fb_num = 2;
+ pinfo.clk_rate = 74250000;
+
+ pinfo.lcdc.h_back_porch = 124;
+ pinfo.lcdc.h_front_porch = 110;
+ pinfo.lcdc.h_pulse_width = 136;
+ pinfo.lcdc.v_back_porch = 19;
+ pinfo.lcdc.v_front_porch = 5;
+ pinfo.lcdc.v_pulse_width = 6;
+ pinfo.lcdc.border_clr = 0; /* blk */
+ pinfo.lcdc.underflow_clr = 0xff; /* blue */
+ pinfo.lcdc.hsync_skew = 0;
+
+ ret = lcdc_device_register(&pinfo);
+ if (ret)
+ printk(KERN_ERR "%s: failed to register device!\n", __func__);
+
+ return ret;
+}
+
+module_init(lcdc_external_init);
diff --git a/drivers/staging/msm/lcdc_gordon.c b/drivers/staging/msm/lcdc_gordon.c
new file mode 100644
index 0000000..399ec8c
--- /dev/null
+++ b/drivers/staging/msm/lcdc_gordon.c
@@ -0,0 +1,446 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/delay.h>
+#include <mach/gpio.h>
+#include "msm_fb.h"
+
+/* registers */
+#define GORDON_REG_NOP 0x00
+#define GORDON_REG_IMGCTL1 0x10
+#define GORDON_REG_IMGCTL2 0x11
+#define GORDON_REG_IMGSET1 0x12
+#define GORDON_REG_IMGSET2 0x13
+#define GORDON_REG_IVBP1 0x14
+#define GORDON_REG_IHBP1 0x15
+#define GORDON_REG_IVNUM1 0x16
+#define GORDON_REG_IHNUM1 0x17
+#define GORDON_REG_IVBP2 0x18
+#define GORDON_REG_IHBP2 0x19
+#define GORDON_REG_IVNUM2 0x1A
+#define GORDON_REG_IHNUM2 0x1B
+#define GORDON_REG_LCDIFCTL1 0x30
+#define GORDON_REG_VALTRAN 0x31
+#define GORDON_REG_AVCTL 0x33
+#define GORDON_REG_LCDIFCTL2 0x34
+#define GORDON_REG_LCDIFCTL3 0x35
+#define GORDON_REG_LCDIFSET1 0x36
+#define GORDON_REG_PCCTL 0x3C
+#define GORDON_REG_TPARAM1 0x40
+#define GORDON_REG_TLCDIF1 0x41
+#define GORDON_REG_TSSPB_ST1 0x42
+#define GORDON_REG_TSSPB_ED1 0x43
+#define GORDON_REG_TSCK_ST1 0x44
+#define GORDON_REG_TSCK_WD1 0x45
+#define GORDON_REG_TGSPB_VST1 0x46
+#define GORDON_REG_TGSPB_VED1 0x47
+#define GORDON_REG_TGSPB_CH1 0x48
+#define GORDON_REG_TGCK_ST1 0x49
+#define GORDON_REG_TGCK_ED1 0x4A
+#define GORDON_REG_TPCTL_ST1 0x4B
+#define GORDON_REG_TPCTL_ED1 0x4C
+#define GORDON_REG_TPCHG_ED1 0x4D
+#define GORDON_REG_TCOM_CH1 0x4E
+#define GORDON_REG_THBP1 0x4F
+#define GORDON_REG_TPHCTL1 0x50
+#define GORDON_REG_EVPH1 0x51
+#define GORDON_REG_EVPL1 0x52
+#define GORDON_REG_EVNH1 0x53
+#define GORDON_REG_EVNL1 0x54
+#define GORDON_REG_TBIAS1 0x55
+#define GORDON_REG_TPARAM2 0x56
+#define GORDON_REG_TLCDIF2 0x57
+#define GORDON_REG_TSSPB_ST2 0x58
+#define GORDON_REG_TSSPB_ED2 0x59
+#define GORDON_REG_TSCK_ST2 0x5A
+#define GORDON_REG_TSCK_WD2 0x5B
+#define GORDON_REG_TGSPB_VST2 0x5C
+#define GORDON_REG_TGSPB_VED2 0x5D
+#define GORDON_REG_TGSPB_CH2 0x5E
+#define GORDON_REG_TGCK_ST2 0x5F
+#define GORDON_REG_TGCK_ED2 0x60
+#define GORDON_REG_TPCTL_ST2 0x61
+#define GORDON_REG_TPCTL_ED2 0x62
+#define GORDON_REG_TPCHG_ED2 0x63
+#define GORDON_REG_TCOM_CH2 0x64
+#define GORDON_REG_THBP2 0x65
+#define GORDON_REG_TPHCTL2 0x66
+#define GORDON_REG_POWCTL 0x80
+
+static int lcdc_gordon_panel_off(struct platform_device *pdev);
+
+static int spi_cs;
+static int spi_sclk;
+static int spi_sdo;
+static int spi_sdi;
+static int spi_dac;
+static unsigned char bit_shift[8] = { (1 << 7), /* MSB */
+ (1 << 6),
+ (1 << 5),
+ (1 << 4),
+ (1 << 3),
+ (1 << 2),
+ (1 << 1),
+ (1 << 0) /* LSB */
+};
+
+struct gordon_state_type{
+ boolean disp_initialized;
+ boolean display_on;
+ boolean disp_powered_up;
+};
+
+static struct gordon_state_type gordon_state = { 0 };
+static struct msm_panel_common_pdata *lcdc_gordon_pdata;
+
+static void serigo(uint16 reg, uint8 data)
+{
+ unsigned int tx_val = ((0x00FF & reg) << 8) | data;
+ unsigned char i, val = 0;
+
+ /* Enable the Chip Select */
+ gpio_set_value(spi_cs, 1);
+ udelay(33);
+
+ /* Transmit it in two parts, Higher Byte first, then Lower Byte */
+ val = (unsigned char)((tx_val & 0xFF00) >> 8);
+
+ /* Clock should be Low before entering ! */
+ for (i = 0; i < 8; i++) {
+ /* #1: Drive the Data (High or Low) */
+ if (val & bit_shift[i])
+ gpio_set_value(spi_sdi, 1);
+ else
+ gpio_set_value(spi_sdi, 0);
+
+ /* #2: Drive the Clk High and then Low */
+ udelay(33);
+ gpio_set_value(spi_sclk, 1);
+ udelay(33);
+ gpio_set_value(spi_sclk, 0);
+ }
+
+ /* Idle state of SDO (MOSI) is Low */
+ gpio_set_value(spi_sdi, 0);
+ /* ..then Lower Byte */
+ val = (uint8) (tx_val & 0x00FF);
+ /* Before we enter here the Clock should be Low ! */
+
+ for (i = 0; i < 8; i++) {
+ /* #1: Drive the Data (High or Low) */
+ if (val & bit_shift[i])
+ gpio_set_value(spi_sdi, 1);
+ else
+ gpio_set_value(spi_sdi, 0);
+
+ /* #2: Drive the Clk High and then Low */
+ udelay(33);
+
+ gpio_set_value(spi_sclk, 1);
+ udelay(33);
+ gpio_set_value(spi_sclk, 0);
+ }
+
+ /* Idle state of SDO (MOSI) is Low */
+ gpio_set_value(spi_sdi, 0);
+
+ /* Now Disable the Chip Select */
+ udelay(33);
+ gpio_set_value(spi_cs, 0);
+}
+
+static void spi_init(void)
+{
+ /* Setting the Default GPIO's */
+ spi_sclk = *(lcdc_gordon_pdata->gpio_num);
+ spi_cs = *(lcdc_gordon_pdata->gpio_num + 1);
+ spi_sdi = *(lcdc_gordon_pdata->gpio_num + 2);
+ spi_sdo = *(lcdc_gordon_pdata->gpio_num + 3);
+
+ /* Set the output so that we dont disturb the slave device */
+ gpio_set_value(spi_sclk, 0);
+ gpio_set_value(spi_sdi, 0);
+
+ /* Set the Chip Select De-asserted */
+ gpio_set_value(spi_cs, 0);
+
+}
+
+static void gordon_disp_powerup(void)
+{
+ if (!gordon_state.disp_powered_up && !gordon_state.display_on) {
+ /* Reset the hardware first */
+ /* Include DAC power up implementation here */
+ gordon_state.disp_powered_up = TRUE;
+ }
+}
+
+static void gordon_init(void)
+{
+ /* Image interface settings */
+ serigo(GORDON_REG_IMGCTL2, 0x00);
+ serigo(GORDON_REG_IMGSET1, 0x00);
+
+ /* Exchange the RGB signal for J510(Softbank mobile) */
+ serigo(GORDON_REG_IMGSET2, 0x12);
+ serigo(GORDON_REG_LCDIFSET1, 0x00);
+
+ /* Pre-charge settings */
+ serigo(GORDON_REG_PCCTL, 0x09);
+ serigo(GORDON_REG_LCDIFCTL2, 0x7B);
+
+ mdelay(1);
+}
+
+static void gordon_disp_on(void)
+{
+ if (gordon_state.disp_powered_up && !gordon_state.display_on) {
+ gordon_init();
+ mdelay(20);
+ /* gordon_dispmode setting */
+ serigo(GORDON_REG_TPARAM1, 0x30);
+ serigo(GORDON_REG_TLCDIF1, 0x00);
+ serigo(GORDON_REG_TSSPB_ST1, 0x8B);
+ serigo(GORDON_REG_TSSPB_ED1, 0x93);
+ serigo(GORDON_REG_TSCK_ST1, 0x88);
+ serigo(GORDON_REG_TSCK_WD1, 0x00);
+ serigo(GORDON_REG_TGSPB_VST1, 0x01);
+ serigo(GORDON_REG_TGSPB_VED1, 0x02);
+ serigo(GORDON_REG_TGSPB_CH1, 0x5E);
+ serigo(GORDON_REG_TGCK_ST1, 0x80);
+ serigo(GORDON_REG_TGCK_ED1, 0x3C);
+ serigo(GORDON_REG_TPCTL_ST1, 0x50);
+ serigo(GORDON_REG_TPCTL_ED1, 0x74);
+ serigo(GORDON_REG_TPCHG_ED1, 0x78);
+ serigo(GORDON_REG_TCOM_CH1, 0x50);
+ serigo(GORDON_REG_THBP1, 0x84);
+ serigo(GORDON_REG_TPHCTL1, 0x00);
+ serigo(GORDON_REG_EVPH1, 0x70);
+ serigo(GORDON_REG_EVPL1, 0x64);
+ serigo(GORDON_REG_EVNH1, 0x56);
+ serigo(GORDON_REG_EVNL1, 0x48);
+ serigo(GORDON_REG_TBIAS1, 0x88);
+
+ /* QVGA settings */
+ serigo(GORDON_REG_TPARAM2, 0x28);
+ serigo(GORDON_REG_TLCDIF2, 0x14);
+ serigo(GORDON_REG_TSSPB_ST2, 0x49);
+ serigo(GORDON_REG_TSSPB_ED2, 0x4B);
+ serigo(GORDON_REG_TSCK_ST2, 0x4A);
+ serigo(GORDON_REG_TSCK_WD2, 0x02);
+ serigo(GORDON_REG_TGSPB_VST2, 0x02);
+ serigo(GORDON_REG_TGSPB_VED2, 0x03);
+ serigo(GORDON_REG_TGSPB_CH2, 0x2F);
+ serigo(GORDON_REG_TGCK_ST2, 0x40);
+ serigo(GORDON_REG_TGCK_ED2, 0x1E);
+ serigo(GORDON_REG_TPCTL_ST2, 0x2C);
+ serigo(GORDON_REG_TPCTL_ED2, 0x3A);
+ serigo(GORDON_REG_TPCHG_ED2, 0x3C);
+ serigo(GORDON_REG_TCOM_CH2, 0x28);
+ serigo(GORDON_REG_THBP2, 0x4D);
+ serigo(GORDON_REG_TPHCTL2, 0x1A);
+
+ /* VGA settings */
+ serigo(GORDON_REG_IVBP1, 0x02);
+ serigo(GORDON_REG_IHBP1, 0x90);
+ serigo(GORDON_REG_IVNUM1, 0xA0);
+ serigo(GORDON_REG_IHNUM1, 0x78);
+
+ /* QVGA settings */
+ serigo(GORDON_REG_IVBP2, 0x02);
+ serigo(GORDON_REG_IHBP2, 0x48);
+ serigo(GORDON_REG_IVNUM2, 0x50);
+ serigo(GORDON_REG_IHNUM2, 0x3C);
+
+ /* Gordon Charge pump settings and ON */
+ serigo(GORDON_REG_POWCTL, 0x03);
+ mdelay(15);
+ serigo(GORDON_REG_POWCTL, 0x07);
+ mdelay(15);
+
+ serigo(GORDON_REG_POWCTL, 0x0F);
+ mdelay(15);
+
+ serigo(GORDON_REG_AVCTL, 0x03);
+ mdelay(15);
+
+ serigo(GORDON_REG_POWCTL, 0x1F);
+ mdelay(15);
+
+ serigo(GORDON_REG_POWCTL, 0x5F);
+ mdelay(15);
+
+ serigo(GORDON_REG_POWCTL, 0x7F);
+ mdelay(15);
+
+ serigo(GORDON_REG_LCDIFCTL1, 0x02);
+ mdelay(15);
+
+ serigo(GORDON_REG_IMGCTL1, 0x00);
+ mdelay(15);
+
+ serigo(GORDON_REG_LCDIFCTL3, 0x00);
+ mdelay(15);
+
+ serigo(GORDON_REG_VALTRAN, 0x01);
+ mdelay(15);
+
+ serigo(GORDON_REG_LCDIFCTL1, 0x03);
+ mdelay(1);
+ gordon_state.display_on = TRUE;
+ }
+}
+
+static int lcdc_gordon_panel_on(struct platform_device *pdev)
+{
+ if (!gordon_state.disp_initialized) {
+ /* Configure reset GPIO that drives DAC */
+ lcdc_gordon_pdata->panel_config_gpio(1);
+ spi_dac = *(lcdc_gordon_pdata->gpio_num + 4);
+ gpio_set_value(spi_dac, 0);
+ udelay(15);
+ gpio_set_value(spi_dac, 1);
+ spi_init(); /* LCD needs SPI */
+ gordon_disp_powerup();
+ gordon_disp_on();
+ gordon_state.disp_initialized = TRUE;
+ }
+ return 0;
+}
+
+static int lcdc_gordon_panel_off(struct platform_device *pdev)
+{
+ if (gordon_state.disp_powered_up && gordon_state.display_on) {
+ serigo(GORDON_REG_LCDIFCTL2, 0x7B);
+ serigo(GORDON_REG_VALTRAN, 0x01);
+ serigo(GORDON_REG_LCDIFCTL1, 0x02);
+ serigo(GORDON_REG_LCDIFCTL3, 0x01);
+ mdelay(20);
+ serigo(GORDON_REG_VALTRAN, 0x01);
+ serigo(GORDON_REG_IMGCTL1, 0x01);
+ serigo(GORDON_REG_LCDIFCTL1, 0x00);
+ mdelay(20);
+
+ serigo(GORDON_REG_POWCTL, 0x1F);
+ mdelay(40);
+
+ serigo(GORDON_REG_POWCTL, 0x07);
+ mdelay(40);
+
+ serigo(GORDON_REG_POWCTL, 0x03);
+ mdelay(40);
+
+ serigo(GORDON_REG_POWCTL, 0x00);
+ mdelay(40);
+ lcdc_gordon_pdata->panel_config_gpio(0);
+ gordon_state.display_on = FALSE;
+ gordon_state.disp_initialized = FALSE;
+ }
+ return 0;
+}
+
+static void lcdc_gordon_set_backlight(struct msm_fb_data_type *mfd)
+{
+ int bl_level = mfd->bl_level;
+
+ if (bl_level <= 1) {
+ /* keep back light OFF */
+ serigo(GORDON_REG_LCDIFCTL2, 0x0B);
+ udelay(15);
+ serigo(GORDON_REG_VALTRAN, 0x01);
+ } else {
+ /* keep back light ON */
+ serigo(GORDON_REG_LCDIFCTL2, 0x7B);
+ udelay(15);
+ serigo(GORDON_REG_VALTRAN, 0x01);
+ }
+}
+
+static int __init gordon_probe(struct platform_device *pdev)
+{
+ if (pdev->id == 0) {
+ lcdc_gordon_pdata = pdev->dev.platform_data;
+ return 0;
+ }
+ msm_fb_add_device(pdev);
+ return 0;
+}
+
+static struct platform_driver this_driver = {
+ .probe = gordon_probe,
+ .driver = {
+ .name = "lcdc_gordon_vga",
+ },
+};
+
+static struct msm_fb_panel_data gordon_panel_data = {
+ .on = lcdc_gordon_panel_on,
+ .off = lcdc_gordon_panel_off,
+ .set_backlight = lcdc_gordon_set_backlight,
+};
+
+static struct platform_device this_device = {
+ .name = "lcdc_gordon_vga",
+ .id = 1,
+ .dev = {
+ .platform_data = &gordon_panel_data,
+ }
+};
+
+static int __init lcdc_gordon_panel_init(void)
+{
+ int ret;
+ struct msm_panel_info *pinfo;
+
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+ if (msm_fb_detect_client("lcdc_gordon_vga"))
+ return 0;
+#endif
+ ret = platform_driver_register(&this_driver);
+ if (ret)
+ return ret;
+
+ pinfo = &gordon_panel_data.panel_info;
+ pinfo->xres = 480;
+ pinfo->yres = 640;
+ pinfo->type = LCDC_PANEL;
+ pinfo->pdest = DISPLAY_1;
+ pinfo->wait_cycle = 0;
+ pinfo->bpp = 24;
+ pinfo->fb_num = 2;
+ pinfo->clk_rate = 24500000;
+ pinfo->bl_max = 4;
+ pinfo->bl_min = 1;
+
+ pinfo->lcdc.h_back_porch = 84;
+ pinfo->lcdc.h_front_porch = 33;
+ pinfo->lcdc.h_pulse_width = 60;
+ pinfo->lcdc.v_back_porch = 0;
+ pinfo->lcdc.v_front_porch = 2;
+ pinfo->lcdc.v_pulse_width = 2;
+ pinfo->lcdc.border_clr = 0; /* blk */
+ pinfo->lcdc.underflow_clr = 0xff; /* blue */
+ pinfo->lcdc.hsync_skew = 0;
+
+ ret = platform_device_register(&this_device);
+ if (ret)
+ platform_driver_unregister(&this_driver);
+
+ return ret;
+}
+
+module_init(lcdc_gordon_panel_init);
diff --git a/drivers/staging/msm/lcdc_grapefruit.c b/drivers/staging/msm/lcdc_grapefruit.c
new file mode 100644
index 0000000..7284649
--- /dev/null
+++ b/drivers/staging/msm/lcdc_grapefruit.c
@@ -0,0 +1,60 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+#include "mddihosti.h"
+#endif
+
+static int __init lcdc_grapefruit_init(void)
+{
+ int ret;
+ struct msm_panel_info pinfo;
+
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+ if (msm_fb_detect_client("lcdc_grapefruit_vga"))
+ return 0;
+#endif
+
+ pinfo.xres = 1024;
+ pinfo.yres = 600;
+ pinfo.type = LCDC_PANEL;
+ pinfo.pdest = DISPLAY_1;
+ pinfo.wait_cycle = 0;
+ pinfo.bpp = 18;
+ pinfo.fb_num = 2;
+ pinfo.clk_rate = 40000000;
+
+ pinfo.lcdc.h_back_porch = 88;
+ pinfo.lcdc.h_front_porch = 40;
+ pinfo.lcdc.h_pulse_width = 128;
+ pinfo.lcdc.v_back_porch = 23;
+ pinfo.lcdc.v_front_porch = 1;
+ pinfo.lcdc.v_pulse_width = 4;
+ pinfo.lcdc.border_clr = 0; /* blk */
+ pinfo.lcdc.underflow_clr = 0xff; /* blue */
+ pinfo.lcdc.hsync_skew = 0;
+
+ ret = lcdc_device_register(&pinfo);
+ if (ret)
+ printk(KERN_ERR "%s: failed to register device!\n", __func__);
+
+ return ret;
+}
+
+module_init(lcdc_grapefruit_init);
diff --git a/drivers/staging/msm/lcdc_panel.c b/drivers/staging/msm/lcdc_panel.c
new file mode 100644
index 0000000..b40974e
--- /dev/null
+++ b/drivers/staging/msm/lcdc_panel.c
@@ -0,0 +1,88 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+static int lcdc_panel_on(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static int lcdc_panel_off(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static int __init lcdc_panel_probe(struct platform_device *pdev)
+{
+ msm_fb_add_device(pdev);
+
+ return 0;
+}
+
+static struct platform_driver this_driver = {
+ .probe = lcdc_panel_probe,
+ .driver = {
+ .name = "lcdc_panel",
+ },
+};
+
+static struct msm_fb_panel_data lcdc_panel_data = {
+ .on = lcdc_panel_on,
+ .off = lcdc_panel_off,
+};
+
+static int lcdc_dev_id;
+
+int lcdc_device_register(struct msm_panel_info *pinfo)
+{
+ struct platform_device *pdev = NULL;
+ int ret;
+
+ pdev = platform_device_alloc("lcdc_panel", ++lcdc_dev_id);
+ if (!pdev)
+ return -ENOMEM;
+
+ lcdc_panel_data.panel_info = *pinfo;
+ ret = platform_device_add_data(pdev, &lcdc_panel_data,
+ sizeof(lcdc_panel_data));
+ if (ret) {
+ printk(KERN_ERR
+ "%s: platform_device_add_data failed!\n", __func__);
+ goto err_device_put;
+ }
+
+ ret = platform_device_add(pdev);
+ if (ret) {
+ printk(KERN_ERR
+ "%s: platform_device_register failed!\n", __func__);
+ goto err_device_put;
+ }
+
+ return 0;
+
+err_device_put:
+ platform_device_put(pdev);
+ return ret;
+}
+
+static int __init lcdc_panel_init(void)
+{
+ return platform_driver_register(&this_driver);
+}
+
+module_init(lcdc_panel_init);
diff --git a/drivers/staging/msm/lcdc_prism.c b/drivers/staging/msm/lcdc_prism.c
new file mode 100644
index 0000000..d102c98
--- /dev/null
+++ b/drivers/staging/msm/lcdc_prism.c
@@ -0,0 +1,64 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+#include "mddihosti.h"
+#endif
+
+static int __init lcdc_prism_init(void)
+{
+ int ret;
+ struct msm_panel_info pinfo;
+
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+ ret = msm_fb_detect_client("lcdc_prism_wvga");
+ if (ret == -ENODEV)
+ return 0;
+
+ if (ret && (mddi_get_client_id() != 0))
+ return 0;
+#endif
+
+ pinfo.xres = 800;
+ pinfo.yres = 480;
+ pinfo.type = LCDC_PANEL;
+ pinfo.pdest = DISPLAY_1;
+ pinfo.wait_cycle = 0;
+ pinfo.bpp = 24;
+ pinfo.fb_num = 2;
+ pinfo.clk_rate = 38460000;
+
+ pinfo.lcdc.h_back_porch = 21;
+ pinfo.lcdc.h_front_porch = 81;
+ pinfo.lcdc.h_pulse_width = 60;
+ pinfo.lcdc.v_back_porch = 18;
+ pinfo.lcdc.v_front_porch = 27;
+ pinfo.lcdc.v_pulse_width = 2;
+ pinfo.lcdc.border_clr = 0; /* blk */
+ pinfo.lcdc.underflow_clr = 0xff; /* blue */
+ pinfo.lcdc.hsync_skew = 0;
+
+ ret = lcdc_device_register(&pinfo);
+ if (ret)
+ printk(KERN_ERR "%s: failed to register device!\n", __func__);
+
+ return ret;
+}
+
+module_init(lcdc_prism_init);
diff --git a/drivers/staging/msm/lcdc_sharp_wvga_pt.c b/drivers/staging/msm/lcdc_sharp_wvga_pt.c
new file mode 100644
index 0000000..1f08cf9
--- /dev/null
+++ b/drivers/staging/msm/lcdc_sharp_wvga_pt.c
@@ -0,0 +1,290 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/delay.h>
+#ifdef CONFIG_ARCH_MSM7X30
+#include <linux/mfd/pmic8058.h>
+#endif
+#include <mach/gpio.h>
+#include "msm_fb.h"
+
+static int lcdc_sharp_panel_off(struct platform_device *pdev);
+
+static int spi_cs;
+static int spi_sclk;
+static int spi_mosi;
+static int spi_miso;
+static unsigned char bit_shift[8] = { (1 << 7), /* MSB */
+ (1 << 6),
+ (1 << 5),
+ (1 << 4),
+ (1 << 3),
+ (1 << 2),
+ (1 << 1),
+ (1 << 0) /* LSB */
+};
+
+struct sharp_state_type {
+ boolean disp_initialized;
+ boolean display_on;
+ boolean disp_powered_up;
+};
+
+struct sharp_spi_data {
+ u8 addr;
+ u8 data;
+};
+
+static struct sharp_spi_data init_sequence[] = {
+ { 15, 0x01 },
+ { 5, 0x01 },
+ { 7, 0x10 },
+ { 9, 0x1E },
+ { 10, 0x04 },
+ { 17, 0xFF },
+ { 21, 0x8A },
+ { 22, 0x00 },
+ { 23, 0x82 },
+ { 24, 0x24 },
+ { 25, 0x22 },
+ { 26, 0x6D },
+ { 27, 0xEB },
+ { 28, 0xB9 },
+ { 29, 0x3A },
+ { 49, 0x1A },
+ { 50, 0x16 },
+ { 51, 0x05 },
+ { 55, 0x7F },
+ { 56, 0x15 },
+ { 57, 0x7B },
+ { 60, 0x05 },
+ { 61, 0x0C },
+ { 62, 0x80 },
+ { 63, 0x00 },
+ { 92, 0x90 },
+ { 97, 0x01 },
+ { 98, 0xFF },
+ { 113, 0x11 },
+ { 114, 0x02 },
+ { 115, 0x08 },
+ { 123, 0xAB },
+ { 124, 0x04 },
+ { 6, 0x02 },
+ { 133, 0x00 },
+ { 134, 0xFE },
+ { 135, 0x22 },
+ { 136, 0x0B },
+ { 137, 0xFF },
+ { 138, 0x0F },
+ { 139, 0x00 },
+ { 140, 0xFE },
+ { 141, 0x22 },
+ { 142, 0x0B },
+ { 143, 0xFF },
+ { 144, 0x0F },
+ { 145, 0x00 },
+ { 146, 0xFE },
+ { 147, 0x22 },
+ { 148, 0x0B },
+ { 149, 0xFF },
+ { 150, 0x0F },
+ { 202, 0x30 },
+ { 30, 0x01 },
+ { 4, 0x01 },
+ { 31, 0x41 },
+};
+
+static struct sharp_state_type sharp_state = { 0 };
+static struct msm_panel_common_pdata *lcdc_sharp_pdata;
+
+static void sharp_spi_write_byte(u8 val)
+{
+ int i;
+
+ /* Clock should be Low before entering */
+ for (i = 0; i < 8; i++) {
+ /* #1: Drive the Data (High or Low) */
+ if (val & bit_shift[i])
+ gpio_set_value(spi_mosi, 1);
+ else
+ gpio_set_value(spi_mosi, 0);
+
+ /* #2: Drive the Clk High and then Low */
+ gpio_set_value(spi_sclk, 1);
+ gpio_set_value(spi_sclk, 0);
+ }
+}
+
+static void serigo(u8 reg, u8 data)
+{
+ /* Enable the Chip Select - low */
+ gpio_set_value(spi_cs, 0);
+ udelay(1);
+
+ /* Transmit register address first, then data */
+ sharp_spi_write_byte(reg);
+
+ /* Idle state of MOSI is Low */
+ gpio_set_value(spi_mosi, 0);
+ udelay(1);
+ sharp_spi_write_byte(data);
+
+ gpio_set_value(spi_mosi, 0);
+ gpio_set_value(spi_cs, 1);
+}
+
+static void sharp_spi_init(void)
+{
+ spi_sclk = *(lcdc_sharp_pdata->gpio_num);
+ spi_cs = *(lcdc_sharp_pdata->gpio_num + 1);
+ spi_mosi = *(lcdc_sharp_pdata->gpio_num + 2);
+ spi_miso = *(lcdc_sharp_pdata->gpio_num + 3);
+
+ /* Set the output so that we don't disturb the slave device */
+ gpio_set_value(spi_sclk, 0);
+ gpio_set_value(spi_mosi, 0);
+
+ /* Set the Chip Select deasserted (active low) */
+ gpio_set_value(spi_cs, 1);
+}
+
+static void sharp_disp_powerup(void)
+{
+ if (!sharp_state.disp_powered_up && !sharp_state.display_on)
+ sharp_state.disp_powered_up = TRUE;
+}
+
+static void sharp_disp_on(void)
+{
+ int i;
+
+ if (sharp_state.disp_powered_up && !sharp_state.display_on) {
+ for (i = 0; i < ARRAY_SIZE(init_sequence); i++) {
+ serigo(init_sequence[i].addr,
+ init_sequence[i].data);
+ }
+ mdelay(10);
+ serigo(31, 0xC1);
+ mdelay(10);
+ serigo(31, 0xD9);
+ serigo(31, 0xDF);
+
+ sharp_state.display_on = TRUE;
+ }
+}
+
+static int lcdc_sharp_panel_on(struct platform_device *pdev)
+{
+ if (!sharp_state.disp_initialized) {
+ lcdc_sharp_pdata->panel_config_gpio(1);
+ sharp_spi_init();
+ sharp_disp_powerup();
+ sharp_disp_on();
+ sharp_state.disp_initialized = TRUE;
+ }
+ return 0;
+}
+
+static int lcdc_sharp_panel_off(struct platform_device *pdev)
+{
+ if (sharp_state.disp_powered_up && sharp_state.display_on) {
+ serigo(4, 0x00);
+ mdelay(40);
+ serigo(31, 0xC1);
+ mdelay(40);
+ serigo(31, 0x00);
+ mdelay(100);
+ sharp_state.display_on = FALSE;
+ sharp_state.disp_initialized = FALSE;
+ }
+ return 0;
+}
+
+static int __init sharp_probe(struct platform_device *pdev)
+{
+ if (pdev->id == 0) {
+ lcdc_sharp_pdata = pdev->dev.platform_data;
+ return 0;
+ }
+ msm_fb_add_device(pdev);
+ return 0;
+}
+
+static struct platform_driver this_driver = {
+ .probe = sharp_probe,
+ .driver = {
+ .name = "lcdc_sharp_wvga",
+ },
+};
+
+static struct msm_fb_panel_data sharp_panel_data = {
+ .on = lcdc_sharp_panel_on,
+ .off = lcdc_sharp_panel_off,
+};
+
+static struct platform_device this_device = {
+ .name = "lcdc_sharp_wvga",
+ .id = 1,
+ .dev = {
+ .platform_data = &sharp_panel_data,
+ }
+};
+
+static int __init lcdc_sharp_panel_init(void)
+{
+ int ret;
+ struct msm_panel_info *pinfo;
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+ if (msm_fb_detect_client("lcdc_sharp_wvga_pt"))
+ return 0;
+#endif
+
+ ret = platform_driver_register(&this_driver);
+ if (ret)
+ return ret;
+
+ pinfo = &sharp_panel_data.panel_info;
+ pinfo->xres = 480;
+ pinfo->yres = 800;
+ pinfo->type = LCDC_PANEL;
+ pinfo->pdest = DISPLAY_1;
+ pinfo->wait_cycle = 0;
+ pinfo->bpp = 18;
+ pinfo->fb_num = 2;
+ pinfo->clk_rate = 24500000;
+ pinfo->bl_max = 4;
+ pinfo->bl_min = 1;
+
+ pinfo->lcdc.h_back_porch = 20;
+ pinfo->lcdc.h_front_porch = 10;
+ pinfo->lcdc.h_pulse_width = 10;
+ pinfo->lcdc.v_back_porch = 2;
+ pinfo->lcdc.v_front_porch = 2;
+ pinfo->lcdc.v_pulse_width = 2;
+ pinfo->lcdc.border_clr = 0;
+ pinfo->lcdc.underflow_clr = 0xff;
+ pinfo->lcdc.hsync_skew = 0;
+
+ ret = platform_device_register(&this_device);
+ if (ret)
+ platform_driver_unregister(&this_driver);
+
+ return ret;
+}
+
+module_init(lcdc_sharp_panel_init);
diff --git a/drivers/staging/msm/lcdc_st15.c b/drivers/staging/msm/lcdc_st15.c
new file mode 100644
index 0000000..fed8278
--- /dev/null
+++ b/drivers/staging/msm/lcdc_st15.c
@@ -0,0 +1,237 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include "msm_fb.h"
+
+#define DEVICE_NAME "sii9022"
+#define SII9022_DEVICE_ID 0xB0
+
+struct sii9022_i2c_addr_data{
+ u8 addr;
+ u8 data;
+};
+
+/* video mode data */
+static u8 video_mode_data[] = {
+ 0x00,
+ 0xF9, 0x1C, 0x70, 0x17, 0x72, 0x06, 0xEE, 0x02,
+};
+
+static u8 avi_io_format[] = {
+ 0x09,
+ 0x00, 0x00,
+};
+
+/* power state */
+static struct sii9022_i2c_addr_data regset0[] = {
+ { 0x60, 0x04 },
+ { 0x63, 0x00 },
+ { 0x1E, 0x00 },
+};
+
+static u8 video_infoframe[] = {
+ 0x0C,
+ 0xF0, 0x00, 0x68, 0x00, 0x04, 0x00, 0x19, 0x00,
+ 0xE9, 0x02, 0x04, 0x01, 0x04, 0x06,
+};
+
+/* configure audio */
+static struct sii9022_i2c_addr_data regset1[] = {
+ { 0x26, 0x90 },
+ { 0x20, 0x90 },
+ { 0x1F, 0x80 },
+ { 0x26, 0x80 },
+ { 0x24, 0x02 },
+ { 0x25, 0x0B },
+ { 0xBC, 0x02 },
+ { 0xBD, 0x24 },
+ { 0xBE, 0x02 },
+};
+
+/* enable audio */
+static u8 misc_infoframe[] = {
+ 0xBF,
+ 0xC2, 0x84, 0x01, 0x0A, 0x6F, 0x02, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+/* set HDMI, active */
+static struct sii9022_i2c_addr_data regset2[] = {
+ { 0x1A, 0x01 },
+ { 0x3D, 0x00 },
+};
+
+static int send_i2c_data(struct i2c_client *client,
+ struct sii9022_i2c_addr_data *regset,
+ int size)
+{
+ int i;
+ int rc = 0;
+
+ for (i = 0; i < size; i++) {
+ rc = i2c_smbus_write_byte_data(
+ client,
+ regset[i].addr, regset[i].data);
+ if (rc)
+ break;
+ }
+ return rc;
+}
+
+static int hdmi_sii_enable(struct i2c_client *client)
+{
+ int rc;
+ int retries = 10;
+ int count;
+
+ rc = i2c_smbus_write_byte_data(client, 0xC7, 0x00);
+ if (rc)
+ goto enable_exit;
+
+ do {
+ msleep(1);
+ rc = i2c_smbus_read_byte_data(client, 0x1B);
+ } while ((rc != SII9022_DEVICE_ID) && retries--);
+
+ if (rc != SII9022_DEVICE_ID)
+ return -ENODEV;
+
+ rc = i2c_smbus_write_byte_data(client, 0x1A, 0x11);
+ if (rc)
+ goto enable_exit;
+
+ count = ARRAY_SIZE(video_mode_data);
+ rc = i2c_master_send(client, video_mode_data, count);
+ if (rc != count) {
+ rc = -EIO;
+ goto enable_exit;
+ }
+
+ rc = i2c_smbus_write_byte_data(client, 0x08, 0x20);
+ if (rc)
+ goto enable_exit;
+ count = ARRAY_SIZE(avi_io_format);
+ rc = i2c_master_send(client, avi_io_format, count);
+ if (rc != count) {
+ rc = -EIO;
+ goto enable_exit;
+ }
+
+ rc = send_i2c_data(client, regset0, ARRAY_SIZE(regset0));
+ if (rc)
+ goto enable_exit;
+
+ count = ARRAY_SIZE(video_infoframe);
+ rc = i2c_master_send(client, video_infoframe, count);
+ if (rc != count) {
+ rc = -EIO;
+ goto enable_exit;
+ }
+
+ rc = send_i2c_data(client, regset1, ARRAY_SIZE(regset1));
+ if (rc)
+ goto enable_exit;
+
+ count = ARRAY_SIZE(misc_infoframe);
+ rc = i2c_master_send(client, misc_infoframe, count);
+ if (rc != count) {
+ rc = -EIO;
+ goto enable_exit;
+ }
+
+ rc = send_i2c_data(client, regset2, ARRAY_SIZE(regset2));
+ if (rc)
+ goto enable_exit;
+
+ return 0;
+enable_exit:
+ printk(KERN_ERR "%s: exited rc=%d\n", __func__, rc);
+ return rc;
+}
+
+static const struct i2c_device_id hmdi_sii_id[] = {
+ { DEVICE_NAME, 0 },
+ { }
+};
+
+static int hdmi_sii_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int rc;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
+ return -ENODEV;
+ rc = hdmi_sii_enable(client);
+ return rc;
+}
+
+
+static struct i2c_driver hdmi_sii_i2c_driver = {
+ .driver = {
+ .name = DEVICE_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = hdmi_sii_probe,
+ .remove = __exit_p(hdmi_sii_remove),
+ .id_table = hmdi_sii_id,
+};
+
+static int __init lcdc_st15_init(void)
+{
+ int ret;
+ struct msm_panel_info pinfo;
+
+ if (msm_fb_detect_client("lcdc_st15"))
+ return 0;
+
+ pinfo.xres = 1366;
+ pinfo.yres = 768;
+ pinfo.type = LCDC_PANEL;
+ pinfo.pdest = DISPLAY_1;
+ pinfo.wait_cycle = 0;
+ pinfo.bpp = 24;
+ pinfo.fb_num = 2;
+ pinfo.clk_rate = 74250000;
+
+ pinfo.lcdc.h_back_porch = 120;
+ pinfo.lcdc.h_front_porch = 20;
+ pinfo.lcdc.h_pulse_width = 40;
+ pinfo.lcdc.v_back_porch = 25;
+ pinfo.lcdc.v_front_porch = 1;
+ pinfo.lcdc.v_pulse_width = 7;
+ pinfo.lcdc.border_clr = 0; /* blk */
+ pinfo.lcdc.underflow_clr = 0xff; /* blue */
+ pinfo.lcdc.hsync_skew = 0;
+
+ ret = lcdc_device_register(&pinfo);
+ if (ret) {
+ printk(KERN_ERR "%s: failed to register device!\n", __func__);
+ goto init_exit;
+ }
+
+ ret = i2c_add_driver(&hdmi_sii_i2c_driver);
+ if (ret)
+ printk(KERN_ERR "%s: failed to add i2c driver\n", __func__);
+
+init_exit:
+ return ret;
+}
+
+module_init(lcdc_st15_init);
diff --git a/drivers/staging/msm/lcdc_st1_wxga.c b/drivers/staging/msm/lcdc_st1_wxga.c
new file mode 100644
index 0000000..7376001
--- /dev/null
+++ b/drivers/staging/msm/lcdc_st1_wxga.c
@@ -0,0 +1,54 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+static int __init lcdc_st1_wxga_init(void)
+{
+ int ret;
+ struct msm_panel_info pinfo;
+
+ if (msm_fb_detect_client("lcdc_st1_wxga"))
+ return 0;
+
+ pinfo.xres = 1280;
+ pinfo.yres = 720;
+ pinfo.type = LCDC_PANEL;
+ pinfo.pdest = DISPLAY_1;
+ pinfo.wait_cycle = 0;
+ pinfo.bpp = 18;
+ pinfo.fb_num = 2;
+ pinfo.clk_rate = 74250000;
+
+ pinfo.lcdc.h_back_porch = 124;
+ pinfo.lcdc.h_front_porch = 110;
+ pinfo.lcdc.h_pulse_width = 136;
+ pinfo.lcdc.v_back_porch = 19;
+ pinfo.lcdc.v_front_porch = 5;
+ pinfo.lcdc.v_pulse_width = 6;
+ pinfo.lcdc.border_clr = 0; /* blk */
+ pinfo.lcdc.underflow_clr = 0xff; /* blue */
+ pinfo.lcdc.hsync_skew = 0;
+
+ ret = lcdc_device_register(&pinfo);
+ if (ret)
+ printk(KERN_ERR "%s: failed to register device!\n", __func__);
+
+ return ret;
+}
+
+module_init(lcdc_st1_wxga_init);
diff --git a/drivers/staging/msm/lcdc_toshiba_wvga_pt.c b/drivers/staging/msm/lcdc_toshiba_wvga_pt.c
new file mode 100644
index 0000000..864d7c1
--- /dev/null
+++ b/drivers/staging/msm/lcdc_toshiba_wvga_pt.c
@@ -0,0 +1,374 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <mach/gpio.h>
+#include <mach/pmic.h>
+#include "msm_fb.h"
+
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+#include "mddihosti.h"
+#endif
+
+static int spi_cs;
+static int spi_sclk;
+static int spi_mosi;
+static int spi_miso;
+
+struct toshiba_state_type{
+ boolean disp_initialized;
+ boolean display_on;
+ boolean disp_powered_up;
+};
+
+static struct toshiba_state_type toshiba_state = { 0 };
+static struct msm_panel_common_pdata *lcdc_toshiba_pdata;
+
+static void toshiba_spi_write_byte(char dc, uint8 data)
+{
+ uint32 bit;
+ int bnum;
+
+ gpio_set_value(spi_sclk, 0); /* clk low */
+ /* dc: 0 for command, 1 for parameter */
+ gpio_set_value(spi_mosi, dc);
+ udelay(1); /* at least 20 ns */
+ gpio_set_value(spi_sclk, 1); /* clk high */
+ udelay(1); /* at least 20 ns */
+ bnum = 8; /* 8 data bits */
+ bit = 0x80;
+ while (bnum) {
+ gpio_set_value(spi_sclk, 0); /* clk low */
+ if (data & bit)
+ gpio_set_value(spi_mosi, 1);
+ else
+ gpio_set_value(spi_mosi, 0);
+ udelay(1);
+ gpio_set_value(spi_sclk, 1); /* clk high */
+ udelay(1);
+ bit >>= 1;
+ bnum--;
+ }
+}
+
+static void toshiba_spi_write(char cmd, uint32 data, int num)
+{
+ char *bp;
+
+ gpio_set_value(spi_cs, 1); /* cs high */
+
+ /* command byte first */
+ toshiba_spi_write_byte(0, cmd);
+
+ /* followed by parameter bytes */
+ if (num) {
+ bp = (char *)&data;;
+ bp += (num - 1);
+ while (num) {
+ toshiba_spi_write_byte(1, *bp);
+ num--;
+ bp--;
+ }
+ }
+
+ gpio_set_value(spi_cs, 0); /* cs low */
+ udelay(1);
+}
+
+void toshiba_spi_read_bytes(char cmd, uint32 *data, int num)
+{
+ uint32 dbit, bits;
+ int bnum;
+
+ gpio_set_value(spi_cs, 1); /* cs high */
+
+ /* command byte first */
+ toshiba_spi_write_byte(0, cmd);
+
+ if (num > 1) {
+ /* extra dc bit */
+ gpio_set_value(spi_sclk, 0); /* clk low */
+ udelay(1);
+ dbit = gpio_get_value(spi_miso);/* dc bit */
+ udelay(1);
+ gpio_set_value(spi_sclk, 1); /* clk high */
+ }
+
+ /* followed by data bytes */
+ bnum = num * 8; /* number of bits */
+ bits = 0;
+ while (bnum) {
+ bits <<= 1;
+ gpio_set_value(spi_sclk, 0); /* clk low */
+ udelay(1);
+ dbit = gpio_get_value(spi_miso);
+ udelay(1);
+ gpio_set_value(spi_sclk, 1); /* clk high */
+ bits |= dbit;
+ bnum--;
+ }
+
+ *data = bits;
+
+ udelay(1);
+ gpio_set_value(spi_cs, 0); /* cs low */
+ udelay(1);
+}
+
+static void spi_pin_assign(void)
+{
+ /* Setting the Default GPIO's */
+ spi_sclk = *(lcdc_toshiba_pdata->gpio_num);
+ spi_cs = *(lcdc_toshiba_pdata->gpio_num + 1);
+ spi_mosi = *(lcdc_toshiba_pdata->gpio_num + 2);
+ spi_miso = *(lcdc_toshiba_pdata->gpio_num + 3);
+}
+
+static void toshiba_disp_powerup(void)
+{
+ if (!toshiba_state.disp_powered_up && !toshiba_state.display_on) {
+ /* Reset the hardware first */
+ /* Include DAC power up implementation here */
+ toshiba_state.disp_powered_up = TRUE;
+ }
+}
+
+static void toshiba_disp_on(void)
+{
+ uint32 data;
+
+ gpio_set_value(spi_cs, 0); /* low */
+ gpio_set_value(spi_sclk, 1); /* high */
+ gpio_set_value(spi_mosi, 0);
+ gpio_set_value(spi_miso, 0);
+
+ if (toshiba_state.disp_powered_up && !toshiba_state.display_on) {
+ toshiba_spi_write(0, 0, 0);
+ mdelay(7);
+ toshiba_spi_write(0, 0, 0);
+ mdelay(7);
+ toshiba_spi_write(0, 0, 0);
+ mdelay(7);
+ toshiba_spi_write(0xba, 0x11, 1);
+ toshiba_spi_write(0x36, 0x00, 1);
+ mdelay(1);
+ toshiba_spi_write(0x3a, 0x60, 1);
+ toshiba_spi_write(0xb1, 0x5d, 1);
+ mdelay(1);
+ toshiba_spi_write(0xb2, 0x33, 1);
+ toshiba_spi_write(0xb3, 0x22, 1);
+ mdelay(1);
+ toshiba_spi_write(0xb4, 0x02, 1);
+ toshiba_spi_write(0xb5, 0x1e, 1); /* vcs -- adjust brightness */
+ mdelay(1);
+ toshiba_spi_write(0xb6, 0x27, 1);
+ toshiba_spi_write(0xb7, 0x03, 1);
+ mdelay(1);
+ toshiba_spi_write(0xb9, 0x24, 1);
+ toshiba_spi_write(0xbd, 0xa1, 1);
+ mdelay(1);
+ toshiba_spi_write(0xbb, 0x00, 1);
+ toshiba_spi_write(0xbf, 0x01, 1);
+ mdelay(1);
+ toshiba_spi_write(0xbe, 0x00, 1);
+ toshiba_spi_write(0xc0, 0x11, 1);
+ mdelay(1);
+ toshiba_spi_write(0xc1, 0x11, 1);
+ toshiba_spi_write(0xc2, 0x11, 1);
+ mdelay(1);
+ toshiba_spi_write(0xc3, 0x3232, 2);
+ mdelay(1);
+ toshiba_spi_write(0xc4, 0x3232, 2);
+ mdelay(1);
+ toshiba_spi_write(0xc5, 0x3232, 2);
+ mdelay(1);
+ toshiba_spi_write(0xc6, 0x3232, 2);
+ mdelay(1);
+ toshiba_spi_write(0xc7, 0x6445, 2);
+ mdelay(1);
+ toshiba_spi_write(0xc8, 0x44, 1);
+ toshiba_spi_write(0xc9, 0x52, 1);
+ mdelay(1);
+ toshiba_spi_write(0xca, 0x00, 1);
+ mdelay(1);
+ toshiba_spi_write(0xec, 0x02a4, 2); /* 0x02a4 */
+ mdelay(1);
+ toshiba_spi_write(0xcf, 0x01, 1);
+ mdelay(1);
+ toshiba_spi_write(0xd0, 0xc003, 2); /* c003 */
+ mdelay(1);
+ toshiba_spi_write(0xd1, 0x01, 1);
+ mdelay(1);
+ toshiba_spi_write(0xd2, 0x0028, 2);
+ mdelay(1);
+ toshiba_spi_write(0xd3, 0x0028, 2);
+ mdelay(1);
+ toshiba_spi_write(0xd4, 0x26a4, 2);
+ mdelay(1);
+ toshiba_spi_write(0xd5, 0x20, 1);
+ mdelay(1);
+ toshiba_spi_write(0xef, 0x3200, 2);
+ mdelay(32);
+ toshiba_spi_write(0xbc, 0x80, 1); /* wvga pass through */
+ toshiba_spi_write(0x3b, 0x00, 1);
+ mdelay(1);
+ toshiba_spi_write(0xb0, 0x16, 1);
+ mdelay(1);
+ toshiba_spi_write(0xb8, 0xfff5, 2);
+ mdelay(1);
+ toshiba_spi_write(0x11, 0, 0);
+ mdelay(5);
+ toshiba_spi_write(0x29, 0, 0);
+ mdelay(5);
+ toshiba_state.display_on = TRUE;
+ }
+
+ data = 0;
+ toshiba_spi_read_bytes(0x04, &data, 3);
+ printk(KERN_INFO "toshiba_disp_on: id=%x\n", data);
+
+}
+
+static int lcdc_toshiba_panel_on(struct platform_device *pdev)
+{
+ if (!toshiba_state.disp_initialized) {
+ /* Configure reset GPIO that drives DAC */
+ if (lcdc_toshiba_pdata->panel_config_gpio)
+ lcdc_toshiba_pdata->panel_config_gpio(1);
+ toshiba_disp_powerup();
+ toshiba_disp_on();
+ toshiba_state.disp_initialized = TRUE;
+ }
+ return 0;
+}
+
+static int lcdc_toshiba_panel_off(struct platform_device *pdev)
+{
+ if (toshiba_state.disp_powered_up && toshiba_state.display_on) {
+ /* Main panel power off (Deep standby in) */
+
+ toshiba_spi_write(0x28, 0, 0); /* display off */
+ mdelay(1);
+ toshiba_spi_write(0xb8, 0x8002, 2); /* output control */
+ mdelay(1);
+ toshiba_spi_write(0x10, 0x00, 1); /* sleep mode in */
+ mdelay(85); /* wait 85 msec */
+ toshiba_spi_write(0xb0, 0x00, 1); /* deep standby in */
+ mdelay(1);
+ if (lcdc_toshiba_pdata->panel_config_gpio)
+ lcdc_toshiba_pdata->panel_config_gpio(0);
+ toshiba_state.display_on = FALSE;
+ toshiba_state.disp_initialized = FALSE;
+ }
+ return 0;
+}
+
+static void lcdc_toshiba_set_backlight(struct msm_fb_data_type *mfd)
+{
+ int bl_level;
+ int ret = -EPERM;
+
+ bl_level = mfd->bl_level;
+ ret = pmic_set_led_intensity(LED_LCD, bl_level);
+
+ if (ret)
+ printk(KERN_WARNING "%s: can't set lcd backlight!\n",
+ __func__);
+}
+
+static int __init toshiba_probe(struct platform_device *pdev)
+{
+ if (pdev->id == 0) {
+ lcdc_toshiba_pdata = pdev->dev.platform_data;
+ spi_pin_assign();
+ return 0;
+ }
+ msm_fb_add_device(pdev);
+ return 0;
+}
+
+static struct platform_driver this_driver = {
+ .probe = toshiba_probe,
+ .driver = {
+ .name = "lcdc_toshiba_wvga",
+ },
+};
+
+static struct msm_fb_panel_data toshiba_panel_data = {
+ .on = lcdc_toshiba_panel_on,
+ .off = lcdc_toshiba_panel_off,
+ .set_backlight = lcdc_toshiba_set_backlight,
+};
+
+static struct platform_device this_device = {
+ .name = "lcdc_toshiba_wvga",
+ .id = 1,
+ .dev = {
+ .platform_data = &toshiba_panel_data,
+ }
+};
+
+static int __init lcdc_toshiba_panel_init(void)
+{
+ int ret;
+ struct msm_panel_info *pinfo;
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+ if (mddi_get_client_id() != 0)
+ return 0;
+
+ ret = msm_fb_detect_client("lcdc_toshiba_wvga_pt");
+ if (ret)
+ return 0;
+
+#endif
+
+ ret = platform_driver_register(&this_driver);
+ if (ret)
+ return ret;
+
+ pinfo = &toshiba_panel_data.panel_info;
+ pinfo->xres = 480;
+ pinfo->yres = 800;
+ pinfo->type = LCDC_PANEL;
+ pinfo->pdest = DISPLAY_1;
+ pinfo->wait_cycle = 0;
+ pinfo->bpp = 18;
+ pinfo->fb_num = 2;
+ /* 30Mhz mdp_lcdc_pclk and mdp_lcdc_pad_pcl */
+ pinfo->clk_rate = 27648000;
+ pinfo->bl_max = 15;
+ pinfo->bl_min = 1;
+
+ pinfo->lcdc.h_back_porch = 184; /* hsw = 8 + hbp=184 */
+ pinfo->lcdc.h_front_porch = 4;
+ pinfo->lcdc.h_pulse_width = 8;
+ pinfo->lcdc.v_back_porch = 2; /* vsw=1 + vbp = 2 */
+ pinfo->lcdc.v_front_porch = 3;
+ pinfo->lcdc.v_pulse_width = 1;
+ pinfo->lcdc.border_clr = 0; /* blk */
+ pinfo->lcdc.underflow_clr = 0xff; /* blue */
+ pinfo->lcdc.hsync_skew = 0;
+
+ ret = platform_device_register(&this_device);
+ if (ret)
+ platform_driver_unregister(&this_driver);
+
+ return ret;
+}
+
+device_initcall(lcdc_toshiba_panel_init);
diff --git a/drivers/staging/msm/lcdc_wxga.c b/drivers/staging/msm/lcdc_wxga.c
new file mode 100644
index 0000000..202c92c
--- /dev/null
+++ b/drivers/staging/msm/lcdc_wxga.c
@@ -0,0 +1,56 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+static int __init lcdc_wxga_init(void)
+{
+ int ret;
+ struct msm_panel_info pinfo;
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+ if (msm_fb_detect_client("lcdc_wxga"))
+ return 0;
+#endif
+
+ pinfo.xres = 1280;
+ pinfo.yres = 720;
+ pinfo.type = LCDC_PANEL;
+ pinfo.pdest = DISPLAY_1;
+ pinfo.wait_cycle = 0;
+ pinfo.bpp = 24;
+ pinfo.fb_num = 2;
+ pinfo.clk_rate = 74250000;
+
+ pinfo.lcdc.h_back_porch = 124;
+ pinfo.lcdc.h_front_porch = 110;
+ pinfo.lcdc.h_pulse_width = 136;
+ pinfo.lcdc.v_back_porch = 19;
+ pinfo.lcdc.v_front_porch = 5;
+ pinfo.lcdc.v_pulse_width = 6;
+ pinfo.lcdc.border_clr = 0; /* blk */
+ pinfo.lcdc.underflow_clr = 0xff; /* blue */
+ pinfo.lcdc.hsync_skew = 0;
+
+ ret = lcdc_device_register(&pinfo);
+ if (ret)
+ printk(KERN_ERR "%s: failed to register device!\n", __func__);
+
+ return ret;
+}
+
+module_init(lcdc_wxga_init);
diff --git a/drivers/staging/msm/logo.c b/drivers/staging/msm/logo.c
new file mode 100644
index 0000000..7272765
--- /dev/null
+++ b/drivers/staging/msm/logo.c
@@ -0,0 +1,98 @@
+/* drivers/video/msm/logo.c
+ *
+ * Show Logo in RLE 565 format
+ *
+ * Copyright (C) 2008 Google Incorporated
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+#include <linux/vt_kern.h>
+#include <linux/unistd.h>
+#include <linux/syscalls.h>
+
+#include <linux/irq.h>
+#include <asm/system.h>
+
+#define fb_width(fb) ((fb)->var.xres)
+#define fb_height(fb) ((fb)->var.yres)
+#define fb_size(fb) ((fb)->var.xres * (fb)->var.yres * 2)
+
+static void memset16(void *_ptr, unsigned short val, unsigned count)
+{
+ unsigned short *ptr = _ptr;
+ count >>= 1;
+ while (count--)
+ *ptr++ = val;
+}
+
+/* 565RLE image format: [count(2 bytes), rle(2 bytes)] */
+int load_565rle_image(char *filename)
+{
+ struct fb_info *info;
+ int fd, err = 0;
+ unsigned count, max;
+ unsigned short *data, *bits, *ptr;
+
+ info = registered_fb[0];
+ if (!info) {
+ printk(KERN_WARNING "%s: Can not access framebuffer\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ fd = sys_open(filename, O_RDONLY, 0);
+ if (fd < 0) {
+ printk(KERN_WARNING "%s: Can not open %s\n",
+ __func__, filename);
+ return -ENOENT;
+ }
+ count = (unsigned)sys_lseek(fd, (off_t)0, 2);
+ if (count == 0) {
+ sys_close(fd);
+ err = -EIO;
+ goto err_logo_close_file;
+ }
+ sys_lseek(fd, (off_t)0, 0);
+ data = kmalloc(count, GFP_KERNEL);
+ if (!data) {
+ printk(KERN_WARNING "%s: Can not alloc data\n", __func__);
+ err = -ENOMEM;
+ goto err_logo_close_file;
+ }
+ if ((unsigned)sys_read(fd, (char *)data, count) != count) {
+ err = -EIO;
+ goto err_logo_free_data;
+ }
+
+ max = fb_width(info) * fb_height(info);
+ ptr = data;
+ bits = (unsigned short *)(info->screen_base);
+ while (count > 3) {
+ unsigned n = ptr[0];
+ if (n > max)
+ break;
+ memset16(bits, ptr[1], n << 1);
+ bits += n;
+ max -= n;
+ ptr += 2;
+ count -= 4;
+ }
+
+err_logo_free_data:
+ kfree(data);
+err_logo_close_file:
+ sys_close(fd);
+ return err;
+}
+EXPORT_SYMBOL(load_565rle_image);
diff --git a/drivers/staging/msm/mddi.c b/drivers/staging/msm/mddi.c
new file mode 100644
index 0000000..132eb1a
--- /dev/null
+++ b/drivers/staging/msm/mddi.c
@@ -0,0 +1,375 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include "msm_fb.h"
+#include "mddihosti.h"
+#include "mddihost.h"
+#include <mach/gpio.h>
+#include <mach/clk.h>
+
+static int mddi_probe(struct platform_device *pdev);
+static int mddi_remove(struct platform_device *pdev);
+
+static int mddi_off(struct platform_device *pdev);
+static int mddi_on(struct platform_device *pdev);
+
+static int mddi_suspend(struct platform_device *pdev, pm_message_t state);
+static int mddi_resume(struct platform_device *pdev);
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void mddi_early_suspend(struct early_suspend *h);
+static void mddi_early_resume(struct early_suspend *h);
+#endif
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+static struct clk *mddi_clk;
+static struct clk *mddi_pclk;
+static struct mddi_platform_data *mddi_pdata;
+
+static struct platform_driver mddi_driver = {
+ .probe = mddi_probe,
+ .remove = mddi_remove,
+#ifndef CONFIG_HAS_EARLYSUSPEND
+#ifdef CONFIG_PM
+ .suspend = mddi_suspend,
+ .resume = mddi_resume,
+#endif
+#endif
+ .suspend_late = NULL,
+ .resume_early = NULL,
+ .shutdown = NULL,
+ .driver = {
+ .name = "mddi",
+ },
+};
+
+extern int int_mddi_pri_flag;
+
+static int mddi_off(struct platform_device *pdev)
+{
+ int ret = 0;
+
+ ret = panel_next_off(pdev);
+
+ if (mddi_pdata && mddi_pdata->mddi_power_save)
+ mddi_pdata->mddi_power_save(0);
+
+ return ret;
+}
+
+static int mddi_on(struct platform_device *pdev)
+{
+ int ret = 0;
+ u32 clk_rate;
+ struct msm_fb_data_type *mfd;
+
+ mfd = platform_get_drvdata(pdev);
+
+ if (mddi_pdata && mddi_pdata->mddi_power_save)
+ mddi_pdata->mddi_power_save(1);
+
+ clk_rate = mfd->fbi->var.pixclock;
+ clk_rate = min(clk_rate, mfd->panel_info.clk_max);
+
+ if (mddi_pdata &&
+ mddi_pdata->mddi_sel_clk &&
+ mddi_pdata->mddi_sel_clk(&clk_rate))
+ printk(KERN_ERR
+ "%s: can't select mddi io clk targate rate = %d\n",
+ __func__, clk_rate);
+
+ if (clk_set_min_rate(mddi_clk, clk_rate) < 0)
+ printk(KERN_ERR "%s: clk_set_min_rate failed\n",
+ __func__);
+
+ ret = panel_next_on(pdev);
+
+ return ret;
+}
+
+static int mddi_resource_initialized;
+
+static int mddi_probe(struct platform_device *pdev)
+{
+ struct msm_fb_data_type *mfd;
+ struct platform_device *mdp_dev = NULL;
+ struct msm_fb_panel_data *pdata = NULL;
+ int rc;
+ resource_size_t size ;
+ u32 clk_rate;
+
+ if ((pdev->id == 0) && (pdev->num_resources >= 0)) {
+ mddi_pdata = pdev->dev.platform_data;
+
+ size = resource_size(&pdev->resource[0]);
+ msm_pmdh_base = ioremap(pdev->resource[0].start, size);
+
+ MSM_FB_INFO("primary mddi base phy_addr = 0x%x virt = 0x%x\n",
+ pdev->resource[0].start, (int) msm_pmdh_base);
+
+ if (unlikely(!msm_pmdh_base))
+ return -ENOMEM;
+
+ if (mddi_pdata && mddi_pdata->mddi_power_save)
+ mddi_pdata->mddi_power_save(1);
+
+ mddi_resource_initialized = 1;
+ return 0;
+ }
+
+ if (!mddi_resource_initialized)
+ return -EPERM;
+
+ mfd = platform_get_drvdata(pdev);
+
+ if (!mfd)
+ return -ENODEV;
+
+ if (mfd->key != MFD_KEY)
+ return -EINVAL;
+
+ if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+ return -ENOMEM;
+
+ mdp_dev = platform_device_alloc("mdp", pdev->id);
+ if (!mdp_dev)
+ return -ENOMEM;
+
+ /*
+ * link to the latest pdev
+ */
+ mfd->pdev = mdp_dev;
+ mfd->dest = DISPLAY_LCD;
+
+ /*
+ * alloc panel device data
+ */
+ if (platform_device_add_data
+ (mdp_dev, pdev->dev.platform_data,
+ sizeof(struct msm_fb_panel_data))) {
+ printk(KERN_ERR "mddi_probe: platform_device_add_data failed!\n");
+ platform_device_put(mdp_dev);
+ return -ENOMEM;
+ }
+ /*
+ * data chain
+ */
+ pdata = mdp_dev->dev.platform_data;
+ pdata->on = mddi_on;
+ pdata->off = mddi_off;
+ pdata->next = pdev;
+
+ /*
+ * get/set panel specific fb info
+ */
+ mfd->panel_info = pdata->panel_info;
+ mfd->fb_imgType = MDP_RGB_565;
+
+ clk_rate = mfd->panel_info.clk_max;
+ if (mddi_pdata &&
+ mddi_pdata->mddi_sel_clk &&
+ mddi_pdata->mddi_sel_clk(&clk_rate))
+ printk(KERN_ERR
+ "%s: can't select mddi io clk targate rate = %d\n",
+ __func__, clk_rate);
+
+ if (clk_set_max_rate(mddi_clk, clk_rate) < 0)
+ printk(KERN_ERR "%s: clk_set_max_rate failed\n", __func__);
+ mfd->panel_info.clk_rate = mfd->panel_info.clk_min;
+
+ /*
+ * set driver data
+ */
+ platform_set_drvdata(mdp_dev, mfd);
+
+ /*
+ * register in mdp driver
+ */
+ rc = platform_device_add(mdp_dev);
+ if (rc)
+ goto mddi_probe_err;
+
+ pdev_list[pdev_list_cnt++] = pdev;
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+ mfd->mddi_early_suspend.level = EARLY_SUSPEND_LEVEL_DISABLE_FB;
+ mfd->mddi_early_suspend.suspend = mddi_early_suspend;
+ mfd->mddi_early_suspend.resume = mddi_early_resume;
+ register_early_suspend(&mfd->mddi_early_suspend);
+#endif
+
+ return 0;
+
+mddi_probe_err:
+ platform_device_put(mdp_dev);
+ return rc;
+}
+
+static int mddi_pad_ctrl;
+static int mddi_power_locked;
+static int mddi_is_in_suspend;
+
+void mddi_disable(int lock)
+{
+ mddi_host_type host_idx = MDDI_HOST_PRIM;
+
+ if (mddi_power_locked)
+ return;
+
+ if (lock)
+ mddi_power_locked = 1;
+
+ if (mddi_host_timer.function)
+ del_timer_sync(&mddi_host_timer);
+
+ mddi_pad_ctrl = mddi_host_reg_in(PAD_CTL);
+ mddi_host_reg_out(PAD_CTL, 0x0);
+
+ if (clk_set_min_rate(mddi_clk, 0) < 0)
+ printk(KERN_ERR "%s: clk_set_min_rate failed\n", __func__);
+
+ clk_disable(mddi_clk);
+ if (mddi_pclk)
+ clk_disable(mddi_pclk);
+ disable_irq(INT_MDDI_PRI);
+
+ if (mddi_pdata && mddi_pdata->mddi_power_save)
+ mddi_pdata->mddi_power_save(0);
+}
+
+static int mddi_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ if (mddi_is_in_suspend)
+ return 0;
+
+ mddi_is_in_suspend = 1;
+ mddi_disable(0);
+ return 0;
+}
+
+static int mddi_resume(struct platform_device *pdev)
+{
+ mddi_host_type host_idx = MDDI_HOST_PRIM;
+
+ if (!mddi_is_in_suspend)
+ return 0;
+
+ mddi_is_in_suspend = 0;
+
+ if (mddi_power_locked)
+ return 0;
+
+ enable_irq(INT_MDDI_PRI);
+ clk_enable(mddi_clk);
+ if (mddi_pclk)
+ clk_enable(mddi_pclk);
+ mddi_host_reg_out(PAD_CTL, mddi_pad_ctrl);
+
+ if (mddi_host_timer.function)
+ mddi_host_timer_service(0);
+
+ return 0;
+}
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void mddi_early_suspend(struct early_suspend *h)
+{
+ pm_message_t state;
+ struct msm_fb_data_type *mfd = container_of(h, struct msm_fb_data_type,
+ mddi_early_suspend);
+
+ state.event = PM_EVENT_SUSPEND;
+ mddi_suspend(mfd->pdev, state);
+}
+
+static void mddi_early_resume(struct early_suspend *h)
+{
+ struct msm_fb_data_type *mfd = container_of(h, struct msm_fb_data_type,
+ mddi_early_suspend);
+ mddi_resume(mfd->pdev);
+}
+#endif
+
+static int mddi_remove(struct platform_device *pdev)
+{
+ if (mddi_host_timer.function)
+ del_timer_sync(&mddi_host_timer);
+
+ iounmap(msm_pmdh_base);
+
+ return 0;
+}
+
+static int mddi_register_driver(void)
+{
+ return platform_driver_register(&mddi_driver);
+}
+
+static int __init mddi_driver_init(void)
+{
+ int ret;
+
+ mddi_clk = clk_get(NULL, "mddi_clk");
+ if (IS_ERR(mddi_clk)) {
+ printk(KERN_ERR "can't find mddi_clk \n");
+ return PTR_ERR(mddi_clk);
+ }
+ clk_enable(mddi_clk);
+
+ mddi_pclk = clk_get(NULL, "mddi_pclk");
+ if (IS_ERR(mddi_pclk))
+ mddi_pclk = NULL;
+ else
+ clk_enable(mddi_pclk);
+
+ ret = mddi_register_driver();
+ if (ret) {
+ clk_disable(mddi_clk);
+ clk_put(mddi_clk);
+ if (mddi_pclk) {
+ clk_disable(mddi_pclk);
+ clk_put(mddi_pclk);
+ }
+ printk(KERN_ERR "mddi_register_driver() failed!\n");
+ return ret;
+ }
+
+ mddi_init();
+
+ return ret;
+}
+
+module_init(mddi_driver_init);
diff --git a/drivers/staging/msm/mddi_ext.c b/drivers/staging/msm/mddi_ext.c
new file mode 100644
index 0000000..c0c168c7
--- /dev/null
+++ b/drivers/staging/msm/mddi_ext.c
@@ -0,0 +1,320 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+#include <mach/clk.h>
+#include <linux/platform_device.h>
+
+#include "msm_fb.h"
+#include "mddihosti.h"
+
+static int mddi_ext_probe(struct platform_device *pdev);
+static int mddi_ext_remove(struct platform_device *pdev);
+
+static int mddi_ext_off(struct platform_device *pdev);
+static int mddi_ext_on(struct platform_device *pdev);
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+
+static int mddi_ext_suspend(struct platform_device *pdev, pm_message_t state);
+static int mddi_ext_resume(struct platform_device *pdev);
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void mddi_ext_early_suspend(struct early_suspend *h);
+static void mddi_ext_early_resume(struct early_suspend *h);
+#endif
+
+static struct platform_driver mddi_ext_driver = {
+ .probe = mddi_ext_probe,
+ .remove = mddi_ext_remove,
+#ifndef CONFIG_HAS_EARLYSUSPEND
+#ifdef CONFIG_PM
+ .suspend = mddi_ext_suspend,
+ .resume = mddi_ext_resume,
+#endif
+#endif
+ .resume_early = NULL,
+ .resume = NULL,
+ .shutdown = NULL,
+ .driver = {
+ .name = "mddi_ext",
+ },
+};
+
+static struct clk *mddi_ext_clk;
+static struct mddi_platform_data *mddi_ext_pdata;
+
+extern int int_mddi_ext_flag;
+
+static int mddi_ext_off(struct platform_device *pdev)
+{
+ int ret = 0;
+
+ ret = panel_next_off(pdev);
+ mddi_host_stop_ext_display();
+
+ return ret;
+}
+
+static int mddi_ext_on(struct platform_device *pdev)
+{
+ int ret = 0;
+ u32 clk_rate;
+ struct msm_fb_data_type *mfd;
+
+ mfd = platform_get_drvdata(pdev);
+
+ clk_rate = mfd->fbi->var.pixclock;
+ clk_rate = min(clk_rate, mfd->panel_info.clk_max);
+
+ if (mddi_ext_pdata &&
+ mddi_ext_pdata->mddi_sel_clk &&
+ mddi_ext_pdata->mddi_sel_clk(&clk_rate))
+ printk(KERN_ERR
+ "%s: can't select mddi io clk targate rate = %d\n",
+ __func__, clk_rate);
+
+ if (clk_set_min_rate(mddi_ext_clk, clk_rate) < 0)
+ printk(KERN_ERR "%s: clk_set_min_rate failed\n",
+ __func__);
+
+ mddi_host_start_ext_display();
+ ret = panel_next_on(pdev);
+
+ return ret;
+}
+
+static int mddi_ext_resource_initialized;
+
+static int mddi_ext_probe(struct platform_device *pdev)
+{
+ struct msm_fb_data_type *mfd;
+ struct platform_device *mdp_dev = NULL;
+ struct msm_fb_panel_data *pdata = NULL;
+ int rc;
+ resource_size_t size ;
+ u32 clk_rate;
+
+ if ((pdev->id == 0) && (pdev->num_resources >= 0)) {
+ mddi_ext_pdata = pdev->dev.platform_data;
+
+ size = resource_size(&pdev->resource[0]);
+ msm_emdh_base = ioremap(pdev->resource[0].start, size);
+
+ MSM_FB_INFO("external mddi base address = 0x%x\n",
+ pdev->resource[0].start);
+
+ if (unlikely(!msm_emdh_base))
+ return -ENOMEM;
+
+ mddi_ext_resource_initialized = 1;
+ return 0;
+ }
+
+ if (!mddi_ext_resource_initialized)
+ return -EPERM;
+
+ mfd = platform_get_drvdata(pdev);
+
+ if (!mfd)
+ return -ENODEV;
+
+ if (mfd->key != MFD_KEY)
+ return -EINVAL;
+
+ if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+ return -ENOMEM;
+
+ mdp_dev = platform_device_alloc("mdp", pdev->id);
+ if (!mdp_dev)
+ return -ENOMEM;
+
+ /*
+ * link to the latest pdev
+ */
+ mfd->pdev = mdp_dev;
+ mfd->dest = DISPLAY_EXT_MDDI;
+
+ /*
+ * alloc panel device data
+ */
+ if (platform_device_add_data
+ (mdp_dev, pdev->dev.platform_data,
+ sizeof(struct msm_fb_panel_data))) {
+ printk(KERN_ERR "mddi_ext_probe: platform_device_add_data failed!\n");
+ platform_device_put(mdp_dev);
+ return -ENOMEM;
+ }
+ /*
+ * data chain
+ */
+ pdata = mdp_dev->dev.platform_data;
+ pdata->on = mddi_ext_on;
+ pdata->off = mddi_ext_off;
+ pdata->next = pdev;
+
+ /*
+ * get/set panel specific fb info
+ */
+ mfd->panel_info = pdata->panel_info;
+ mfd->fb_imgType = MDP_RGB_565;
+
+ clk_rate = mfd->panel_info.clk_max;
+ if (mddi_ext_pdata &&
+ mddi_ext_pdata->mddi_sel_clk &&
+ mddi_ext_pdata->mddi_sel_clk(&clk_rate))
+ printk(KERN_ERR
+ "%s: can't select mddi io clk targate rate = %d\n",
+ __func__, clk_rate);
+
+ if (clk_set_max_rate(mddi_ext_clk, clk_rate) < 0)
+ printk(KERN_ERR "%s: clk_set_max_rate failed\n", __func__);
+ mfd->panel_info.clk_rate = mfd->panel_info.clk_min;
+
+ /*
+ * set driver data
+ */
+ platform_set_drvdata(mdp_dev, mfd);
+
+ /*
+ * register in mdp driver
+ */
+ rc = platform_device_add(mdp_dev);
+ if (rc)
+ goto mddi_ext_probe_err;
+
+ pdev_list[pdev_list_cnt++] = pdev;
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+ mfd->mddi_ext_early_suspend.level = EARLY_SUSPEND_LEVEL_DISABLE_FB;
+ mfd->mddi_ext_early_suspend.suspend = mddi_ext_early_suspend;
+ mfd->mddi_ext_early_suspend.resume = mddi_ext_early_resume;
+ register_early_suspend(&mfd->mddi_ext_early_suspend);
+#endif
+
+ return 0;
+
+mddi_ext_probe_err:
+ platform_device_put(mdp_dev);
+ return rc;
+}
+
+static int mddi_ext_is_in_suspend;
+
+static int mddi_ext_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ if (mddi_ext_is_in_suspend)
+ return 0;
+
+ mddi_ext_is_in_suspend = 1;
+
+ if (clk_set_min_rate(mddi_ext_clk, 0) < 0)
+ printk(KERN_ERR "%s: clk_set_min_rate failed\n", __func__);
+
+ clk_disable(mddi_ext_clk);
+ disable_irq(INT_MDDI_EXT);
+
+ return 0;
+}
+
+static int mddi_ext_resume(struct platform_device *pdev)
+{
+ struct msm_fb_data_type *mfd;
+
+ mfd = platform_get_drvdata(pdev);
+
+ if (!mddi_ext_is_in_suspend)
+ return 0;
+
+ mddi_ext_is_in_suspend = 0;
+ enable_irq(INT_MDDI_EXT);
+
+ clk_enable(mddi_ext_clk);
+
+ return 0;
+}
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void mddi_ext_early_suspend(struct early_suspend *h)
+{
+ pm_message_t state;
+ struct msm_fb_data_type *mfd = container_of(h, struct msm_fb_data_type,
+ mddi_ext_early_suspend);
+
+ state.event = PM_EVENT_SUSPEND;
+ mddi_ext_suspend(mfd->pdev, state);
+}
+
+static void mddi_ext_early_resume(struct early_suspend *h)
+{
+ struct msm_fb_data_type *mfd = container_of(h, struct msm_fb_data_type,
+ mddi_ext_early_suspend);
+ mddi_ext_resume(mfd->pdev);
+}
+#endif
+
+static int mddi_ext_remove(struct platform_device *pdev)
+{
+ iounmap(msm_emdh_base);
+ return 0;
+}
+
+static int mddi_ext_register_driver(void)
+{
+ return platform_driver_register(&mddi_ext_driver);
+}
+
+static int __init mddi_ext_driver_init(void)
+{
+ int ret;
+
+ mddi_ext_clk = clk_get(NULL, "emdh_clk");
+ if (IS_ERR(mddi_ext_clk)) {
+ printk(KERN_ERR "can't find emdh_clk\n");
+ return PTR_ERR(mddi_ext_clk);
+ }
+ clk_enable(mddi_ext_clk);
+
+ ret = mddi_ext_register_driver();
+ if (ret) {
+ clk_disable(mddi_ext_clk);
+ clk_put(mddi_ext_clk);
+ printk(KERN_ERR "mddi_ext_register_driver() failed!\n");
+ return ret;
+ }
+ mddi_init();
+
+ return ret;
+}
+
+module_init(mddi_ext_driver_init);
diff --git a/drivers/staging/msm/mddi_ext_lcd.c b/drivers/staging/msm/mddi_ext_lcd.c
new file mode 100644
index 0000000..502e80d
--- /dev/null
+++ b/drivers/staging/msm/mddi_ext_lcd.c
@@ -0,0 +1,91 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+
+static int mddi_ext_lcd_on(struct platform_device *pdev);
+static int mddi_ext_lcd_off(struct platform_device *pdev);
+
+static int mddi_ext_lcd_on(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static int mddi_ext_lcd_off(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static int __init mddi_ext_lcd_probe(struct platform_device *pdev)
+{
+ msm_fb_add_device(pdev);
+
+ return 0;
+}
+
+static struct platform_driver this_driver = {
+ .probe = mddi_ext_lcd_probe,
+ .driver = {
+ .name = "extmddi_svga",
+ },
+};
+
+static struct msm_fb_panel_data mddi_ext_lcd_panel_data = {
+ .panel_info.xres = 800,
+ .panel_info.yres = 600,
+ .panel_info.type = EXT_MDDI_PANEL,
+ .panel_info.pdest = DISPLAY_1,
+ .panel_info.wait_cycle = 0,
+ .panel_info.bpp = 18,
+ .panel_info.fb_num = 2,
+ .panel_info.clk_rate = 122880000,
+ .panel_info.clk_min = 120000000,
+ .panel_info.clk_max = 125000000,
+ .on = mddi_ext_lcd_on,
+ .off = mddi_ext_lcd_off,
+};
+
+static struct platform_device this_device = {
+ .name = "extmddi_svga",
+ .id = 0,
+ .dev = {
+ .platform_data = &mddi_ext_lcd_panel_data,
+ }
+};
+
+static int __init mddi_ext_lcd_init(void)
+{
+ int ret;
+ struct msm_panel_info *pinfo;
+
+ ret = platform_driver_register(&this_driver);
+ if (!ret) {
+ pinfo = &mddi_ext_lcd_panel_data.panel_info;
+ pinfo->lcd.vsync_enable = FALSE;
+ pinfo->mddi.vdopkt = MDDI_DEFAULT_PRIM_PIX_ATTR;
+
+ ret = platform_device_register(&this_device);
+ if (ret)
+ platform_driver_unregister(&this_driver);
+ }
+
+ return ret;
+}
+
+module_init(mddi_ext_lcd_init);
diff --git a/drivers/staging/msm/mddi_prism.c b/drivers/staging/msm/mddi_prism.c
new file mode 100644
index 0000000..489d404
--- /dev/null
+++ b/drivers/staging/msm/mddi_prism.c
@@ -0,0 +1,114 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+
+static int prism_lcd_on(struct platform_device *pdev);
+static int prism_lcd_off(struct platform_device *pdev);
+
+static int prism_lcd_on(struct platform_device *pdev)
+{
+ /* Set the MDP pixel data attributes for Primary Display */
+ mddi_host_write_pix_attr_reg(0x00C3);
+
+ return 0;
+}
+
+static int prism_lcd_off(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static int __init prism_probe(struct platform_device *pdev)
+{
+ msm_fb_add_device(pdev);
+
+ return 0;
+}
+
+static struct platform_driver this_driver = {
+ .probe = prism_probe,
+ .driver = {
+ .name = "mddi_prism_wvga",
+ },
+};
+
+static struct msm_fb_panel_data prism_panel_data = {
+ .on = prism_lcd_on,
+ .off = prism_lcd_off,
+};
+
+static struct platform_device this_device = {
+ .name = "mddi_prism_wvga",
+ .id = 0,
+ .dev = {
+ .platform_data = &prism_panel_data,
+ }
+};
+
+static int __init prism_init(void)
+{
+ int ret;
+ struct msm_panel_info *pinfo;
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+ u32 id;
+
+ ret = msm_fb_detect_client("mddi_prism_wvga");
+ if (ret == -ENODEV)
+ return 0;
+
+ if (ret) {
+ id = mddi_get_client_id();
+
+ if (((id >> 16) != 0x4474) || ((id & 0xffff) == 0x8960))
+ return 0;
+ }
+#endif
+ ret = platform_driver_register(&this_driver);
+ if (!ret) {
+ pinfo = &prism_panel_data.panel_info;
+ pinfo->xres = 800;
+ pinfo->yres = 480;
+ pinfo->type = MDDI_PANEL;
+ pinfo->pdest = DISPLAY_1;
+ pinfo->mddi.vdopkt = MDDI_DEFAULT_PRIM_PIX_ATTR;
+ pinfo->wait_cycle = 0;
+ pinfo->bpp = 18;
+ pinfo->fb_num = 2;
+ pinfo->clk_rate = 153600000;
+ pinfo->clk_min = 150000000;
+ pinfo->clk_max = 160000000;
+ pinfo->lcd.vsync_enable = TRUE;
+ pinfo->lcd.refx100 = 6050;
+ pinfo->lcd.v_back_porch = 23;
+ pinfo->lcd.v_front_porch = 20;
+ pinfo->lcd.v_pulse_width = 105;
+ pinfo->lcd.hw_vsync_mode = TRUE;
+ pinfo->lcd.vsync_notifier_period = 0;
+
+ ret = platform_device_register(&this_device);
+ if (ret)
+ platform_driver_unregister(&this_driver);
+ }
+
+ return ret;
+}
+
+module_init(prism_init);
diff --git a/drivers/staging/msm/mddi_sharp.c b/drivers/staging/msm/mddi_sharp.c
new file mode 100644
index 0000000..1da1be4
--- /dev/null
+++ b/drivers/staging/msm/mddi_sharp.c
@@ -0,0 +1,892 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+
+#define SHARP_QVGA_PRIM 1
+#define SHARP_128X128_SECD 2
+
+extern uint32 mddi_host_core_version;
+static boolean mddi_debug_prim_wait = FALSE;
+static boolean mddi_sharp_vsync_wake = TRUE;
+static boolean mddi_sharp_monitor_refresh_value = TRUE;
+static boolean mddi_sharp_report_refresh_measurements = FALSE;
+static uint32 mddi_sharp_rows_per_second = 13830; /* 5200000/376 */
+static uint32 mddi_sharp_rows_per_refresh = 338;
+static uint32 mddi_sharp_usecs_per_refresh = 24440; /* (376+338)/5200000 */
+static boolean mddi_sharp_debug_60hz_refresh = FALSE;
+
+extern mddi_gpio_info_type mddi_gpio;
+extern boolean mddi_vsync_detect_enabled;
+static msm_fb_vsync_handler_type mddi_sharp_vsync_handler;
+static void *mddi_sharp_vsync_handler_arg;
+static uint16 mddi_sharp_vsync_attempts;
+
+static void mddi_sharp_prim_lcd_init(void);
+static void mddi_sharp_sub_lcd_init(void);
+static void mddi_sharp_lcd_set_backlight(struct msm_fb_data_type *mfd);
+static void mddi_sharp_vsync_set_handler(msm_fb_vsync_handler_type handler,
+ void *);
+static void mddi_sharp_lcd_vsync_detected(boolean detected);
+static struct msm_panel_common_pdata *mddi_sharp_pdata;
+
+#define REG_SYSCTL 0x0000
+#define REG_INTR 0x0006
+#define REG_CLKCNF 0x000C
+#define REG_CLKDIV1 0x000E
+#define REG_CLKDIV2 0x0010
+
+#define REG_GIOD 0x0040
+#define REG_GIOA 0x0042
+
+#define REG_AGM 0x010A
+#define REG_FLFT 0x0110
+#define REG_FRGT 0x0112
+#define REG_FTOP 0x0114
+#define REG_FBTM 0x0116
+#define REG_FSTRX 0x0118
+#define REG_FSTRY 0x011A
+#define REG_VRAM 0x0202
+#define REG_SSDCTL 0x0330
+#define REG_SSD0 0x0332
+#define REG_PSTCTL1 0x0400
+#define REG_PSTCTL2 0x0402
+#define REG_PTGCTL 0x042A
+#define REG_PTHP 0x042C
+#define REG_PTHB 0x042E
+#define REG_PTHW 0x0430
+#define REG_PTHF 0x0432
+#define REG_PTVP 0x0434
+#define REG_PTVB 0x0436
+#define REG_PTVW 0x0438
+#define REG_PTVF 0x043A
+#define REG_VBLKS 0x0458
+#define REG_VBLKE 0x045A
+#define REG_SUBCTL 0x0700
+#define REG_SUBTCMD 0x0702
+#define REG_SUBTCMDD 0x0704
+#define REG_REVBYTE 0x0A02
+#define REG_REVCNT 0x0A04
+#define REG_REVATTR 0x0A06
+#define REG_REVFMT 0x0A08
+
+#define SHARP_SUB_UNKNOWN 0xffffffff
+#define SHARP_SUB_HYNIX 1
+#define SHARP_SUB_ROHM 2
+
+static uint32 sharp_subpanel_type = SHARP_SUB_UNKNOWN;
+
+static void sub_through_write(int sub_rs, uint32 sub_data)
+{
+ mddi_queue_register_write(REG_SUBTCMDD, sub_data, FALSE, 0);
+
+ /* CS=1,RD=1,WE=1,RS=sub_rs */
+ mddi_queue_register_write(REG_SUBTCMD, 0x000e | sub_rs, FALSE, 0);
+
+ /* CS=0,RD=1,WE=1,RS=sub_rs */
+ mddi_queue_register_write(REG_SUBTCMD, 0x0006 | sub_rs, FALSE, 0);
+
+ /* CS=0,RD=1,WE=0,RS=sub_rs */
+ mddi_queue_register_write(REG_SUBTCMD, 0x0004 | sub_rs, FALSE, 0);
+
+ /* CS=0,RD=1,WE=1,RS=sub_rs */
+ mddi_queue_register_write(REG_SUBTCMD, 0x0006 | sub_rs, FALSE, 0);
+
+ /* CS=1,RD=1,WE=1,RS=sub_rs */
+ mddi_queue_register_write(REG_SUBTCMD, 0x000e | sub_rs, TRUE, 0);
+}
+
+static uint32 sub_through_read(int sub_rs)
+{
+ uint32 sub_data;
+
+ /* CS=1,RD=1,WE=1,RS=sub_rs */
+ mddi_queue_register_write(REG_SUBTCMD, 0x000e | sub_rs, FALSE, 0);
+
+ /* CS=0,RD=1,WE=1,RS=sub_rs */
+ mddi_queue_register_write(REG_SUBTCMD, 0x0006 | sub_rs, FALSE, 0);
+
+ /* CS=0,RD=1,WE=0,RS=sub_rs */
+ mddi_queue_register_write(REG_SUBTCMD, 0x0002 | sub_rs, TRUE, 0);
+
+ mddi_queue_register_read(REG_SUBTCMDD, &sub_data, TRUE, 0);
+
+ /* CS=0,RD=1,WE=1,RS=sub_rs */
+ mddi_queue_register_write(REG_SUBTCMD, 0x0006 | sub_rs, FALSE, 0);
+
+ /* CS=1,RD=1,WE=1,RS=sub_rs */
+ mddi_queue_register_write(REG_SUBTCMD, 0x000e | sub_rs, TRUE, 0);
+
+ return sub_data;
+}
+
+static void serigo(uint32 ssd)
+{
+ uint32 ssdctl;
+
+ mddi_queue_register_read(REG_SSDCTL, &ssdctl, TRUE, 0);
+ ssdctl = ((ssdctl & 0xE7) | 0x02);
+
+ mddi_queue_register_write(REG_SSD0, ssd, FALSE, 0);
+ mddi_queue_register_write(REG_SSDCTL, ssdctl, TRUE, 0);
+
+ do {
+ mddi_queue_register_read(REG_SSDCTL, &ssdctl, TRUE, 0);
+ } while ((ssdctl & 0x0002) != 0);
+
+ if (mddi_debug_prim_wait)
+ mddi_wait(2);
+}
+
+static void mddi_sharp_lcd_powerdown(void)
+{
+ serigo(0x0131);
+ serigo(0x0300);
+ mddi_wait(40);
+ serigo(0x0135);
+ mddi_wait(20);
+ serigo(0x2122);
+ mddi_wait(20);
+ serigo(0x0201);
+ mddi_wait(20);
+ serigo(0x2100);
+ mddi_wait(20);
+ serigo(0x2000);
+ mddi_wait(20);
+
+ mddi_queue_register_write(REG_PSTCTL1, 0x1, TRUE, 0);
+ mddi_wait(100);
+ mddi_queue_register_write(REG_PSTCTL1, 0x0, TRUE, 0);
+ mddi_wait(2);
+ mddi_queue_register_write(REG_SYSCTL, 0x1, TRUE, 0);
+ mddi_wait(2);
+ mddi_queue_register_write(REG_CLKDIV1, 0x3, TRUE, 0);
+ mddi_wait(2);
+ mddi_queue_register_write(REG_SSDCTL, 0x0000, TRUE, 0); /* SSDRESET */
+ mddi_queue_register_write(REG_SYSCTL, 0x0, TRUE, 0);
+ mddi_wait(2);
+}
+
+static void mddi_sharp_lcd_set_backlight(struct msm_fb_data_type *mfd)
+{
+ uint32 regdata;
+ int32 level;
+ int max = mfd->panel_info.bl_max;
+ int min = mfd->panel_info.bl_min;
+
+ if (mddi_sharp_pdata && mddi_sharp_pdata->backlight_level) {
+ level = mddi_sharp_pdata->backlight_level(mfd->bl_level,
+ max,
+ min);
+
+ if (level < 0)
+ return;
+
+ /* use Rodem GPIO(2:0) to give 8 levels of backlight (7-0) */
+ /* Set lower 3 GPIOs as Outputs (set to 0) */
+ mddi_queue_register_read(REG_GIOA, ®data, TRUE, 0);
+ mddi_queue_register_write(REG_GIOA, regdata & 0xfff8, TRUE, 0);
+
+ /* Set lower 3 GPIOs as level */
+ mddi_queue_register_read(REG_GIOD, ®data, TRUE, 0);
+ mddi_queue_register_write(REG_GIOD,
+ (regdata & 0xfff8) | (0x07 & level), TRUE, 0);
+ }
+}
+
+static void mddi_sharp_prim_lcd_init(void)
+{
+ mddi_queue_register_write(REG_SYSCTL, 0x4000, TRUE, 0);
+ mddi_wait(1);
+ mddi_queue_register_write(REG_SYSCTL, 0x0000, TRUE, 0);
+ mddi_wait(5);
+ mddi_queue_register_write(REG_SYSCTL, 0x0001, FALSE, 0);
+ mddi_queue_register_write(REG_CLKDIV1, 0x000b, FALSE, 0);
+
+ /* new reg write below */
+ if (mddi_sharp_debug_60hz_refresh)
+ mddi_queue_register_write(REG_CLKCNF, 0x070d, FALSE, 0);
+ else
+ mddi_queue_register_write(REG_CLKCNF, 0x0708, FALSE, 0);
+
+ mddi_queue_register_write(REG_SYSCTL, 0x0201, FALSE, 0);
+ mddi_queue_register_write(REG_PTGCTL, 0x0010, FALSE, 0);
+ mddi_queue_register_write(REG_PTHP, 4, FALSE, 0);
+ mddi_queue_register_write(REG_PTHB, 40, FALSE, 0);
+ mddi_queue_register_write(REG_PTHW, 240, FALSE, 0);
+ if (mddi_sharp_debug_60hz_refresh)
+ mddi_queue_register_write(REG_PTHF, 12, FALSE, 0);
+ else
+ mddi_queue_register_write(REG_PTHF, 92, FALSE, 0);
+
+ mddi_wait(1);
+
+ mddi_queue_register_write(REG_PTVP, 1, FALSE, 0);
+ mddi_queue_register_write(REG_PTVB, 2, FALSE, 0);
+ mddi_queue_register_write(REG_PTVW, 320, FALSE, 0);
+ mddi_queue_register_write(REG_PTVF, 15, FALSE, 0);
+
+ mddi_wait(1);
+
+ /* vram_color set REG_AGM???? */
+ mddi_queue_register_write(REG_AGM, 0x0000, TRUE, 0);
+
+ mddi_queue_register_write(REG_SSDCTL, 0x0000, FALSE, 0);
+ mddi_queue_register_write(REG_SSDCTL, 0x0001, TRUE, 0);
+ mddi_wait(1);
+ mddi_queue_register_write(REG_PSTCTL1, 0x0001, TRUE, 0);
+ mddi_wait(10);
+
+ serigo(0x0701);
+ /* software reset */
+ mddi_wait(1);
+ /* Wait over 50us */
+
+ serigo(0x0400);
+ /* DCLK~ACHSYNC~ACVSYNC polarity setting */
+ serigo(0x2900);
+ /* EEPROM start read address setting */
+ serigo(0x2606);
+ /* EEPROM start read register setting */
+ mddi_wait(20);
+ /* Wait over 20ms */
+
+ serigo(0x0503);
+ /* Horizontal timing setting */
+ serigo(0x062C);
+ /* Veritical timing setting */
+ serigo(0x2001);
+ /* power initialize setting(VDC2) */
+ mddi_wait(20);
+ /* Wait over 20ms */
+
+ serigo(0x2120);
+ /* Initialize power setting(CPS) */
+ mddi_wait(20);
+ /* Wait over 20ms */
+
+ serigo(0x2130);
+ /* Initialize power setting(CPS) */
+ mddi_wait(20);
+ /* Wait over 20ms */
+
+ serigo(0x2132);
+ /* Initialize power setting(CPS) */
+ mddi_wait(10);
+ /* Wait over 10ms */
+
+ serigo(0x2133);
+ /* Initialize power setting(CPS) */
+ mddi_wait(20);
+ /* Wait over 20ms */
+
+ serigo(0x0200);
+ /* Panel initialize release(INIT) */
+ mddi_wait(1);
+ /* Wait over 1ms */
+
+ serigo(0x0131);
+ /* Panel setting(CPS) */
+ mddi_wait(1);
+ /* Wait over 1ms */
+
+ mddi_queue_register_write(REG_PSTCTL1, 0x0003, TRUE, 0);
+
+ /* if (FFA LCD is upside down) -> serigo(0x0100); */
+ serigo(0x0130);
+
+ /* Black mask release(display ON) */
+ mddi_wait(1);
+ /* Wait over 1ms */
+
+ if (mddi_sharp_vsync_wake) {
+ mddi_queue_register_write(REG_VBLKS, 0x1001, TRUE, 0);
+ mddi_queue_register_write(REG_VBLKE, 0x1002, TRUE, 0);
+ }
+
+ /* Set the MDP pixel data attributes for Primary Display */
+ mddi_host_write_pix_attr_reg(0x00C3);
+ return;
+
+}
+
+void mddi_sharp_sub_lcd_init(void)
+{
+
+ mddi_queue_register_write(REG_SYSCTL, 0x4000, FALSE, 0);
+ mddi_queue_register_write(REG_SYSCTL, 0x0000, TRUE, 0);
+ mddi_wait(100);
+
+ mddi_queue_register_write(REG_SYSCTL, 0x0001, FALSE, 0);
+ mddi_queue_register_write(REG_CLKDIV1, 0x000b, FALSE, 0);
+ mddi_queue_register_write(REG_CLKCNF, 0x0708, FALSE, 0);
+ mddi_queue_register_write(REG_SYSCTL, 0x0201, FALSE, 0);
+ mddi_queue_register_write(REG_PTGCTL, 0x0010, FALSE, 0);
+ mddi_queue_register_write(REG_PTHP, 4, FALSE, 0);
+ mddi_queue_register_write(REG_PTHB, 40, FALSE, 0);
+ mddi_queue_register_write(REG_PTHW, 128, FALSE, 0);
+ mddi_queue_register_write(REG_PTHF, 92, FALSE, 0);
+ mddi_queue_register_write(REG_PTVP, 1, FALSE, 0);
+ mddi_queue_register_write(REG_PTVB, 2, FALSE, 0);
+ mddi_queue_register_write(REG_PTVW, 128, FALSE, 0);
+ mddi_queue_register_write(REG_PTVF, 15, FALSE, 0);
+
+ /* Now the sub display..... */
+ /* Reset High */
+ mddi_queue_register_write(REG_SUBCTL, 0x0200, FALSE, 0);
+ /* CS=1,RD=1,WE=1,RS=1 */
+ mddi_queue_register_write(REG_SUBTCMD, 0x000f, TRUE, 0);
+ mddi_wait(1);
+ /* Wait 5us */
+
+ if (sharp_subpanel_type == SHARP_SUB_UNKNOWN) {
+ uint32 data;
+
+ sub_through_write(1, 0x05);
+ sub_through_write(1, 0x6A);
+ sub_through_write(1, 0x1D);
+ sub_through_write(1, 0x05);
+ data = sub_through_read(1);
+ if (data == 0x6A) {
+ sharp_subpanel_type = SHARP_SUB_HYNIX;
+ } else {
+ sub_through_write(0, 0x36);
+ sub_through_write(1, 0xA8);
+ sub_through_write(0, 0x09);
+ data = sub_through_read(1);
+ data = sub_through_read(1);
+ if (data == 0x54) {
+ sub_through_write(0, 0x36);
+ sub_through_write(1, 0x00);
+ sharp_subpanel_type = SHARP_SUB_ROHM;
+ }
+ }
+ }
+
+ if (sharp_subpanel_type == SHARP_SUB_HYNIX) {
+ sub_through_write(1, 0x00); /* Display setting 1 */
+ sub_through_write(1, 0x04);
+ sub_through_write(1, 0x01);
+ sub_through_write(1, 0x05);
+ sub_through_write(1, 0x0280);
+ sub_through_write(1, 0x0301);
+ sub_through_write(1, 0x0402);
+ sub_through_write(1, 0x0500);
+ sub_through_write(1, 0x0681);
+ sub_through_write(1, 0x077F);
+ sub_through_write(1, 0x08C0);
+ sub_through_write(1, 0x0905);
+ sub_through_write(1, 0x0A02);
+ sub_through_write(1, 0x0B00);
+ sub_through_write(1, 0x0C00);
+ sub_through_write(1, 0x0D00);
+ sub_through_write(1, 0x0E00);
+ sub_through_write(1, 0x0F00);
+
+ sub_through_write(1, 0x100B); /* Display setting 2 */
+ sub_through_write(1, 0x1103);
+ sub_through_write(1, 0x1237);
+ sub_through_write(1, 0x1300);
+ sub_through_write(1, 0x1400);
+ sub_through_write(1, 0x1500);
+ sub_through_write(1, 0x1605);
+ sub_through_write(1, 0x1700);
+ sub_through_write(1, 0x1800);
+ sub_through_write(1, 0x192E);
+ sub_through_write(1, 0x1A00);
+ sub_through_write(1, 0x1B00);
+ sub_through_write(1, 0x1C00);
+
+ sub_through_write(1, 0x151A); /* Power setting */
+
+ sub_through_write(1, 0x2002); /* Gradation Palette setting */
+ sub_through_write(1, 0x2107);
+ sub_through_write(1, 0x220C);
+ sub_through_write(1, 0x2310);
+ sub_through_write(1, 0x2414);
+ sub_through_write(1, 0x2518);
+ sub_through_write(1, 0x261C);
+ sub_through_write(1, 0x2720);
+ sub_through_write(1, 0x2824);
+ sub_through_write(1, 0x2928);
+ sub_through_write(1, 0x2A2B);
+ sub_through_write(1, 0x2B2E);
+ sub_through_write(1, 0x2C31);
+ sub_through_write(1, 0x2D34);
+ sub_through_write(1, 0x2E37);
+ sub_through_write(1, 0x2F3A);
+ sub_through_write(1, 0x303C);
+ sub_through_write(1, 0x313E);
+ sub_through_write(1, 0x323F);
+ sub_through_write(1, 0x3340);
+ sub_through_write(1, 0x3441);
+ sub_through_write(1, 0x3543);
+ sub_through_write(1, 0x3646);
+ sub_through_write(1, 0x3749);
+ sub_through_write(1, 0x384C);
+ sub_through_write(1, 0x394F);
+ sub_through_write(1, 0x3A52);
+ sub_through_write(1, 0x3B59);
+ sub_through_write(1, 0x3C60);
+ sub_through_write(1, 0x3D67);
+ sub_through_write(1, 0x3E6E);
+ sub_through_write(1, 0x3F7F);
+ sub_through_write(1, 0x4001);
+ sub_through_write(1, 0x4107);
+ sub_through_write(1, 0x420C);
+ sub_through_write(1, 0x4310);
+ sub_through_write(1, 0x4414);
+ sub_through_write(1, 0x4518);
+ sub_through_write(1, 0x461C);
+ sub_through_write(1, 0x4720);
+ sub_through_write(1, 0x4824);
+ sub_through_write(1, 0x4928);
+ sub_through_write(1, 0x4A2B);
+ sub_through_write(1, 0x4B2E);
+ sub_through_write(1, 0x4C31);
+ sub_through_write(1, 0x4D34);
+ sub_through_write(1, 0x4E37);
+ sub_through_write(1, 0x4F3A);
+ sub_through_write(1, 0x503C);
+ sub_through_write(1, 0x513E);
+ sub_through_write(1, 0x523F);
+ sub_through_write(1, 0x5340);
+ sub_through_write(1, 0x5441);
+ sub_through_write(1, 0x5543);
+ sub_through_write(1, 0x5646);
+ sub_through_write(1, 0x5749);
+ sub_through_write(1, 0x584C);
+ sub_through_write(1, 0x594F);
+ sub_through_write(1, 0x5A52);
+ sub_through_write(1, 0x5B59);
+ sub_through_write(1, 0x5C60);
+ sub_through_write(1, 0x5D67);
+ sub_through_write(1, 0x5E6E);
+ sub_through_write(1, 0x5F7E);
+ sub_through_write(1, 0x6000);
+ sub_through_write(1, 0x6107);
+ sub_through_write(1, 0x620C);
+ sub_through_write(1, 0x6310);
+ sub_through_write(1, 0x6414);
+ sub_through_write(1, 0x6518);
+ sub_through_write(1, 0x661C);
+ sub_through_write(1, 0x6720);
+ sub_through_write(1, 0x6824);
+ sub_through_write(1, 0x6928);
+ sub_through_write(1, 0x6A2B);
+ sub_through_write(1, 0x6B2E);
+ sub_through_write(1, 0x6C31);
+ sub_through_write(1, 0x6D34);
+ sub_through_write(1, 0x6E37);
+ sub_through_write(1, 0x6F3A);
+ sub_through_write(1, 0x703C);
+ sub_through_write(1, 0x713E);
+ sub_through_write(1, 0x723F);
+ sub_through_write(1, 0x7340);
+ sub_through_write(1, 0x7441);
+ sub_through_write(1, 0x7543);
+ sub_through_write(1, 0x7646);
+ sub_through_write(1, 0x7749);
+ sub_through_write(1, 0x784C);
+ sub_through_write(1, 0x794F);
+ sub_through_write(1, 0x7A52);
+ sub_through_write(1, 0x7B59);
+ sub_through_write(1, 0x7C60);
+ sub_through_write(1, 0x7D67);
+ sub_through_write(1, 0x7E6E);
+ sub_through_write(1, 0x7F7D);
+
+ sub_through_write(1, 0x1851); /* Display on */
+
+ mddi_queue_register_write(REG_AGM, 0x0000, TRUE, 0);
+
+ /* 1 pixel / 1 post clock */
+ mddi_queue_register_write(REG_CLKDIV2, 0x3b00, FALSE, 0);
+
+ /* SUB LCD select */
+ mddi_queue_register_write(REG_PSTCTL2, 0x0080, FALSE, 0);
+
+ /* RS=0,command initiate number=0,select master mode */
+ mddi_queue_register_write(REG_SUBCTL, 0x0202, FALSE, 0);
+
+ /* Sub LCD Data transform start */
+ mddi_queue_register_write(REG_PSTCTL1, 0x0003, FALSE, 0);
+
+ } else if (sharp_subpanel_type == SHARP_SUB_ROHM) {
+
+ sub_through_write(0, 0x01); /* Display setting */
+ sub_through_write(1, 0x00);
+
+ mddi_wait(1);
+ /* Wait 100us <----- ******* Update 2005/01/24 */
+
+ sub_through_write(0, 0xB6);
+ sub_through_write(1, 0x0C);
+ sub_through_write(1, 0x4A);
+ sub_through_write(1, 0x20);
+ sub_through_write(0, 0x3A);
+ sub_through_write(1, 0x05);
+ sub_through_write(0, 0xB7);
+ sub_through_write(1, 0x01);
+ sub_through_write(0, 0xBA);
+ sub_through_write(1, 0x20);
+ sub_through_write(1, 0x02);
+ sub_through_write(0, 0x25);
+ sub_through_write(1, 0x4F);
+ sub_through_write(0, 0xBB);
+ sub_through_write(1, 0x00);
+ sub_through_write(0, 0x36);
+ sub_through_write(1, 0x00);
+ sub_through_write(0, 0xB1);
+ sub_through_write(1, 0x05);
+ sub_through_write(0, 0xBE);
+ sub_through_write(1, 0x80);
+ sub_through_write(0, 0x26);
+ sub_through_write(1, 0x01);
+ sub_through_write(0, 0x2A);
+ sub_through_write(1, 0x02);
+ sub_through_write(1, 0x81);
+ sub_through_write(0, 0x2B);
+ sub_through_write(1, 0x00);
+ sub_through_write(1, 0x7F);
+
+ sub_through_write(0, 0x2C);
+ sub_through_write(0, 0x11); /* Sleep mode off */
+
+ mddi_wait(1);
+ /* Wait 100 ms <----- ******* Update 2005/01/24 */
+
+ sub_through_write(0, 0x29); /* Display on */
+ sub_through_write(0, 0xB3);
+ sub_through_write(1, 0x20);
+ sub_through_write(1, 0xAA);
+ sub_through_write(1, 0xA0);
+ sub_through_write(1, 0x20);
+ sub_through_write(1, 0x30);
+ sub_through_write(1, 0xA6);
+ sub_through_write(1, 0xFF);
+ sub_through_write(1, 0x9A);
+ sub_through_write(1, 0x9F);
+ sub_through_write(1, 0xAF);
+ sub_through_write(1, 0xBC);
+ sub_through_write(1, 0xCF);
+ sub_through_write(1, 0xDF);
+ sub_through_write(1, 0x20);
+ sub_through_write(1, 0x9C);
+ sub_through_write(1, 0x8A);
+
+ sub_through_write(0, 0x002C); /* Display on */
+
+ /* 1 pixel / 2 post clock */
+ mddi_queue_register_write(REG_CLKDIV2, 0x7b00, FALSE, 0);
+
+ /* SUB LCD select */
+ mddi_queue_register_write(REG_PSTCTL2, 0x0080, FALSE, 0);
+
+ /* RS=1,command initiate number=0,select master mode */
+ mddi_queue_register_write(REG_SUBCTL, 0x0242, FALSE, 0);
+
+ /* Sub LCD Data transform start */
+ mddi_queue_register_write(REG_PSTCTL1, 0x0003, FALSE, 0);
+
+ }
+
+ /* Set the MDP pixel data attributes for Sub Display */
+ mddi_host_write_pix_attr_reg(0x00C0);
+}
+
+void mddi_sharp_lcd_vsync_detected(boolean detected)
+{
+ /* static timetick_type start_time = 0; */
+ static struct timeval start_time;
+ static boolean first_time = TRUE;
+ /* uint32 mdp_cnt_val = 0; */
+ /* timetick_type elapsed_us; */
+ struct timeval now;
+ uint32 elapsed_us;
+ uint32 num_vsyncs;
+
+ if ((detected) || (mddi_sharp_vsync_attempts > 5)) {
+ if ((detected) && (mddi_sharp_monitor_refresh_value)) {
+ /* if (start_time != 0) */
+ if (!first_time) {
+ jiffies_to_timeval(jiffies, &now);
+ elapsed_us =
+ (now.tv_sec - start_time.tv_sec) * 1000000 +
+ now.tv_usec - start_time.tv_usec;
+ /*
+ * LCD is configured for a refresh every usecs,
+ * so to determine the number of vsyncs that
+ * have occurred since the last measurement add
+ * half that to the time difference and divide
+ * by the refresh rate.
+ */
+ num_vsyncs = (elapsed_us +
+ (mddi_sharp_usecs_per_refresh >>
+ 1)) /
+ mddi_sharp_usecs_per_refresh;
+ /*
+ * LCD is configured for * hsyncs (rows) per
+ * refresh cycle. Calculate new rows_per_second
+ * value based upon these new measurements.
+ * MDP can update with this new value.
+ */
+ mddi_sharp_rows_per_second =
+ (mddi_sharp_rows_per_refresh * 1000 *
+ num_vsyncs) / (elapsed_us / 1000);
+ }
+ /* start_time = timetick_get(); */
+ first_time = FALSE;
+ jiffies_to_timeval(jiffies, &start_time);
+ if (mddi_sharp_report_refresh_measurements) {
+ /* mdp_cnt_val = MDP_LINE_COUNT; */
+ }
+ }
+ /* if detected = TRUE, client initiated wakeup was detected */
+ if (mddi_sharp_vsync_handler != NULL) {
+ (*mddi_sharp_vsync_handler)
+ (mddi_sharp_vsync_handler_arg);
+ mddi_sharp_vsync_handler = NULL;
+ }
+ mddi_vsync_detect_enabled = FALSE;
+ mddi_sharp_vsync_attempts = 0;
+ /* need to clear this vsync wakeup */
+ if (!mddi_queue_register_write_int(REG_INTR, 0x0000)) {
+ MDDI_MSG_ERR("Vsync interrupt clear failed!\n");
+ }
+ if (!detected) {
+ /* give up after 5 failed attempts but show error */
+ MDDI_MSG_NOTICE("Vsync detection failed!\n");
+ } else if ((mddi_sharp_monitor_refresh_value) &&
+ (mddi_sharp_report_refresh_measurements)) {
+ MDDI_MSG_NOTICE(" Lines Per Second=%d!\n",
+ mddi_sharp_rows_per_second);
+ }
+ } else
+ /* if detected = FALSE, we woke up from hibernation, but did not
+ * detect client initiated wakeup.
+ */
+ mddi_sharp_vsync_attempts++;
+}
+
+/* ISR to be executed */
+void mddi_sharp_vsync_set_handler(msm_fb_vsync_handler_type handler, void *arg)
+{
+ boolean error = FALSE;
+ unsigned long flags;
+
+ /* Disable interrupts */
+ spin_lock_irqsave(&mddi_host_spin_lock, flags);
+ /* INTLOCK(); */
+
+ if (mddi_sharp_vsync_handler != NULL)
+ error = TRUE;
+
+ /* Register the handler for this particular GROUP interrupt source */
+ mddi_sharp_vsync_handler = handler;
+ mddi_sharp_vsync_handler_arg = arg;
+
+ /* Restore interrupts */
+ spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+ /* INTFREE(); */
+
+ if (error)
+ MDDI_MSG_ERR("MDDI: Previous Vsync handler never called\n");
+
+ /* Enable the vsync wakeup */
+ mddi_queue_register_write(REG_INTR, 0x8100, FALSE, 0);
+
+ mddi_sharp_vsync_attempts = 1;
+ mddi_vsync_detect_enabled = TRUE;
+} /* mddi_sharp_vsync_set_handler */
+
+static int mddi_sharp_lcd_on(struct platform_device *pdev)
+{
+ struct msm_fb_data_type *mfd;
+
+ mfd = platform_get_drvdata(pdev);
+
+ if (!mfd)
+ return -ENODEV;
+
+ if (mfd->key != MFD_KEY)
+ return -EINVAL;
+
+ if (mfd->panel.id == SHARP_QVGA_PRIM)
+ mddi_sharp_prim_lcd_init();
+ else
+ mddi_sharp_sub_lcd_init();
+
+ return 0;
+}
+
+static int mddi_sharp_lcd_off(struct platform_device *pdev)
+{
+ mddi_sharp_lcd_powerdown();
+ return 0;
+}
+
+static int __init mddi_sharp_probe(struct platform_device *pdev)
+{
+ if (pdev->id == 0) {
+ mddi_sharp_pdata = pdev->dev.platform_data;
+ return 0;
+ }
+
+ msm_fb_add_device(pdev);
+
+ return 0;
+}
+
+static struct platform_driver this_driver = {
+ .probe = mddi_sharp_probe,
+ .driver = {
+ .name = "mddi_sharp_qvga",
+ },
+};
+
+static struct msm_fb_panel_data mddi_sharp_panel_data0 = {
+ .on = mddi_sharp_lcd_on,
+ .off = mddi_sharp_lcd_off,
+ .set_backlight = mddi_sharp_lcd_set_backlight,
+ .set_vsync_notifier = mddi_sharp_vsync_set_handler,
+};
+
+static struct platform_device this_device_0 = {
+ .name = "mddi_sharp_qvga",
+ .id = SHARP_QVGA_PRIM,
+ .dev = {
+ .platform_data = &mddi_sharp_panel_data0,
+ }
+};
+
+static struct msm_fb_panel_data mddi_sharp_panel_data1 = {
+ .on = mddi_sharp_lcd_on,
+ .off = mddi_sharp_lcd_off,
+};
+
+static struct platform_device this_device_1 = {
+ .name = "mddi_sharp_qvga",
+ .id = SHARP_128X128_SECD,
+ .dev = {
+ .platform_data = &mddi_sharp_panel_data1,
+ }
+};
+
+static int __init mddi_sharp_init(void)
+{
+ int ret;
+ struct msm_panel_info *pinfo;
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+ u32 id;
+
+ ret = msm_fb_detect_client("mddi_sharp_qvga");
+ if (ret == -ENODEV)
+ return 0;
+
+ if (ret) {
+ id = mddi_get_client_id();
+
+ if (((id >> 16) != 0x0) || ((id & 0xffff) != 0x8835))
+ return 0;
+ }
+#endif
+ if (mddi_host_core_version > 8) {
+ /* can use faster refresh with newer hw revisions */
+ mddi_sharp_debug_60hz_refresh = TRUE;
+
+ /* Timing variables for tracking vsync */
+ /* dot_clock = 6.00MHz
+ * horizontal count = 296
+ * vertical count = 338
+ * refresh rate = 6000000/(296+338) = 60Hz
+ */
+ mddi_sharp_rows_per_second = 20270; /* 6000000/296 */
+ mddi_sharp_rows_per_refresh = 338;
+ mddi_sharp_usecs_per_refresh = 16674; /* (296+338)/6000000 */
+ } else {
+ /* Timing variables for tracking vsync */
+ /* dot_clock = 5.20MHz
+ * horizontal count = 376
+ * vertical count = 338
+ * refresh rate = 5200000/(376+338) = 41Hz
+ */
+ mddi_sharp_rows_per_second = 13830; /* 5200000/376 */
+ mddi_sharp_rows_per_refresh = 338;
+ mddi_sharp_usecs_per_refresh = 24440; /* (376+338)/5200000 */
+ }
+
+ ret = platform_driver_register(&this_driver);
+ if (!ret) {
+ pinfo = &mddi_sharp_panel_data0.panel_info;
+ pinfo->xres = 240;
+ pinfo->yres = 320;
+ pinfo->type = MDDI_PANEL;
+ pinfo->pdest = DISPLAY_1;
+ pinfo->mddi.vdopkt = MDDI_DEFAULT_PRIM_PIX_ATTR;
+ pinfo->wait_cycle = 0;
+ pinfo->bpp = 18;
+ pinfo->fb_num = 2;
+ pinfo->clk_rate = 122880000;
+ pinfo->clk_min = 120000000;
+ pinfo->clk_max = 125000000;
+ pinfo->lcd.vsync_enable = TRUE;
+ pinfo->lcd.refx100 =
+ (mddi_sharp_rows_per_second * 100) /
+ mddi_sharp_rows_per_refresh;
+ pinfo->lcd.v_back_porch = 12;
+ pinfo->lcd.v_front_porch = 6;
+ pinfo->lcd.v_pulse_width = 0;
+ pinfo->lcd.hw_vsync_mode = FALSE;
+ pinfo->lcd.vsync_notifier_period = (1 * HZ);
+ pinfo->bl_max = 7;
+ pinfo->bl_min = 1;
+
+ ret = platform_device_register(&this_device_0);
+ if (ret)
+ platform_driver_unregister(&this_driver);
+
+ pinfo = &mddi_sharp_panel_data1.panel_info;
+ pinfo->xres = 128;
+ pinfo->yres = 128;
+ pinfo->type = MDDI_PANEL;
+ pinfo->pdest = DISPLAY_2;
+ pinfo->mddi.vdopkt = 0x400;
+ pinfo->wait_cycle = 0;
+ pinfo->bpp = 18;
+ pinfo->clk_rate = 122880000;
+ pinfo->clk_min = 120000000;
+ pinfo->clk_max = 125000000;
+ pinfo->fb_num = 2;
+
+ ret = platform_device_register(&this_device_1);
+ if (ret) {
+ platform_device_unregister(&this_device_0);
+ platform_driver_unregister(&this_driver);
+ }
+ }
+
+ if (!ret)
+ mddi_lcd.vsync_detected = mddi_sharp_lcd_vsync_detected;
+
+ return ret;
+}
+
+module_init(mddi_sharp_init);
diff --git a/drivers/staging/msm/mddi_toshiba.c b/drivers/staging/msm/mddi_toshiba.c
new file mode 100644
index 0000000..e96342d
--- /dev/null
+++ b/drivers/staging/msm/mddi_toshiba.c
@@ -0,0 +1,1741 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+#include "mddi_toshiba.h"
+
+#define TM_GET_DID(id) ((id) & 0xff)
+#define TM_GET_PID(id) (((id) & 0xff00)>>8)
+
+#define MDDI_CLIENT_CORE_BASE 0x108000
+#define LCD_CONTROL_BLOCK_BASE 0x110000
+#define SPI_BLOCK_BASE 0x120000
+#define PWM_BLOCK_BASE 0x140000
+#define SYSTEM_BLOCK1_BASE 0x160000
+
+#define TTBUSSEL (MDDI_CLIENT_CORE_BASE|0x18)
+#define DPSET0 (MDDI_CLIENT_CORE_BASE|0x1C)
+#define DPSET1 (MDDI_CLIENT_CORE_BASE|0x20)
+#define DPSUS (MDDI_CLIENT_CORE_BASE|0x24)
+#define DPRUN (MDDI_CLIENT_CORE_BASE|0x28)
+#define SYSCKENA (MDDI_CLIENT_CORE_BASE|0x2C)
+
+#define BITMAP0 (MDDI_CLIENT_CORE_BASE|0x44)
+#define BITMAP1 (MDDI_CLIENT_CORE_BASE|0x48)
+#define BITMAP2 (MDDI_CLIENT_CORE_BASE|0x4C)
+#define BITMAP3 (MDDI_CLIENT_CORE_BASE|0x50)
+#define BITMAP4 (MDDI_CLIENT_CORE_BASE|0x54)
+
+#define SRST (LCD_CONTROL_BLOCK_BASE|0x00)
+#define PORT_ENB (LCD_CONTROL_BLOCK_BASE|0x04)
+#define START (LCD_CONTROL_BLOCK_BASE|0x08)
+#define PORT (LCD_CONTROL_BLOCK_BASE|0x0C)
+
+#define INTFLG (LCD_CONTROL_BLOCK_BASE|0x18)
+#define INTMSK (LCD_CONTROL_BLOCK_BASE|0x1C)
+#define MPLFBUF (LCD_CONTROL_BLOCK_BASE|0x20)
+
+#define PXL (LCD_CONTROL_BLOCK_BASE|0x30)
+#define HCYCLE (LCD_CONTROL_BLOCK_BASE|0x34)
+#define HSW (LCD_CONTROL_BLOCK_BASE|0x38)
+#define HDE_START (LCD_CONTROL_BLOCK_BASE|0x3C)
+#define HDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x40)
+#define VCYCLE (LCD_CONTROL_BLOCK_BASE|0x44)
+#define VSW (LCD_CONTROL_BLOCK_BASE|0x48)
+#define VDE_START (LCD_CONTROL_BLOCK_BASE|0x4C)
+#define VDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x50)
+#define WAKEUP (LCD_CONTROL_BLOCK_BASE|0x54)
+#define REGENB (LCD_CONTROL_BLOCK_BASE|0x5C)
+#define VSYNIF (LCD_CONTROL_BLOCK_BASE|0x60)
+#define WRSTB (LCD_CONTROL_BLOCK_BASE|0x64)
+#define RDSTB (LCD_CONTROL_BLOCK_BASE|0x68)
+#define ASY_DATA (LCD_CONTROL_BLOCK_BASE|0x6C)
+#define ASY_DATB (LCD_CONTROL_BLOCK_BASE|0x70)
+#define ASY_DATC (LCD_CONTROL_BLOCK_BASE|0x74)
+#define ASY_DATD (LCD_CONTROL_BLOCK_BASE|0x78)
+#define ASY_DATE (LCD_CONTROL_BLOCK_BASE|0x7C)
+#define ASY_DATF (LCD_CONTROL_BLOCK_BASE|0x80)
+#define ASY_DATG (LCD_CONTROL_BLOCK_BASE|0x84)
+#define ASY_DATH (LCD_CONTROL_BLOCK_BASE|0x88)
+#define ASY_CMDSET (LCD_CONTROL_BLOCK_BASE|0x8C)
+#define MONI (LCD_CONTROL_BLOCK_BASE|0xB0)
+#define VPOS (LCD_CONTROL_BLOCK_BASE|0xC0)
+
+#define SSICTL (SPI_BLOCK_BASE|0x00)
+#define SSITIME (SPI_BLOCK_BASE|0x04)
+#define SSITX (SPI_BLOCK_BASE|0x08)
+#define SSIINTS (SPI_BLOCK_BASE|0x14)
+
+#define TIMER0LOAD (PWM_BLOCK_BASE|0x00)
+#define TIMER0CTRL (PWM_BLOCK_BASE|0x08)
+#define PWM0OFF (PWM_BLOCK_BASE|0x1C)
+#define TIMER1LOAD (PWM_BLOCK_BASE|0x20)
+#define TIMER1CTRL (PWM_BLOCK_BASE|0x28)
+#define PWM1OFF (PWM_BLOCK_BASE|0x3C)
+#define TIMER2LOAD (PWM_BLOCK_BASE|0x40)
+#define TIMER2CTRL (PWM_BLOCK_BASE|0x48)
+#define PWM2OFF (PWM_BLOCK_BASE|0x5C)
+#define PWMCR (PWM_BLOCK_BASE|0x68)
+
+#define GPIOIS (GPIO_BLOCK_BASE|0x08)
+#define GPIOIEV (GPIO_BLOCK_BASE|0x10)
+#define GPIOIC (GPIO_BLOCK_BASE|0x20)
+
+#define WKREQ (SYSTEM_BLOCK1_BASE|0x00)
+#define CLKENB (SYSTEM_BLOCK1_BASE|0x04)
+#define DRAMPWR (SYSTEM_BLOCK1_BASE|0x08)
+#define INTMASK (SYSTEM_BLOCK1_BASE|0x0C)
+#define CNT_DIS (SYSTEM_BLOCK1_BASE|0x10)
+
+typedef enum {
+ TOSHIBA_STATE_OFF,
+ TOSHIBA_STATE_PRIM_SEC_STANDBY,
+ TOSHIBA_STATE_PRIM_SEC_READY,
+ TOSHIBA_STATE_PRIM_NORMAL_MODE,
+ TOSHIBA_STATE_SEC_NORMAL_MODE
+} mddi_toshiba_state_t;
+
+static uint32 mddi_toshiba_curr_vpos;
+static boolean mddi_toshiba_monitor_refresh_value = FALSE;
+static boolean mddi_toshiba_report_refresh_measurements = FALSE;
+
+boolean mddi_toshiba_61Hz_refresh = TRUE;
+
+/* Modifications to timing to increase refresh rate to > 60Hz.
+ * 20MHz dot clock.
+ * 646 total rows.
+ * 506 total columns.
+ * refresh rate = 61.19Hz
+ */
+static uint32 mddi_toshiba_rows_per_second = 39526;
+static uint32 mddi_toshiba_usecs_per_refresh = 16344;
+static uint32 mddi_toshiba_rows_per_refresh = 646;
+extern boolean mddi_vsync_detect_enabled;
+
+static msm_fb_vsync_handler_type mddi_toshiba_vsync_handler;
+static void *mddi_toshiba_vsync_handler_arg;
+static uint16 mddi_toshiba_vsync_attempts;
+
+static mddi_toshiba_state_t toshiba_state = TOSHIBA_STATE_OFF;
+
+static struct msm_panel_common_pdata *mddi_toshiba_pdata;
+
+static int mddi_toshiba_lcd_on(struct platform_device *pdev);
+static int mddi_toshiba_lcd_off(struct platform_device *pdev);
+
+static void mddi_toshiba_state_transition(mddi_toshiba_state_t a,
+ mddi_toshiba_state_t b)
+{
+ if (toshiba_state != a) {
+ MDDI_MSG_ERR("toshiba state trans. (%d->%d) found %d\n", a, b,
+ toshiba_state);
+ }
+ toshiba_state = b;
+}
+
+#define GORDON_REG_IMGCTL1 0x10 /* Image interface control 1 */
+#define GORDON_REG_IMGCTL2 0x11 /* Image interface control 2 */
+#define GORDON_REG_IMGSET1 0x12 /* Image interface settings 1 */
+#define GORDON_REG_IMGSET2 0x13 /* Image interface settings 2 */
+#define GORDON_REG_IVBP1 0x14 /* DM0: Vert back porch */
+#define GORDON_REG_IHBP1 0x15 /* DM0: Horiz back porch */
+#define GORDON_REG_IVNUM1 0x16 /* DM0: Num of vert lines */
+#define GORDON_REG_IHNUM1 0x17 /* DM0: Num of pixels per line */
+#define GORDON_REG_IVBP2 0x18 /* DM1: Vert back porch */
+#define GORDON_REG_IHBP2 0x19 /* DM1: Horiz back porch */
+#define GORDON_REG_IVNUM2 0x1A /* DM1: Num of vert lines */
+#define GORDON_REG_IHNUM2 0x1B /* DM1: Num of pixels per line */
+#define GORDON_REG_LCDIFCTL1 0x30 /* LCD interface control 1 */
+#define GORDON_REG_VALTRAN 0x31 /* LCD IF ctl: VALTRAN sync flag */
+#define GORDON_REG_AVCTL 0x33
+#define GORDON_REG_LCDIFCTL2 0x34 /* LCD interface control 2 */
+#define GORDON_REG_LCDIFCTL3 0x35 /* LCD interface control 3 */
+#define GORDON_REG_LCDIFSET1 0x36 /* LCD interface settings 1 */
+#define GORDON_REG_PCCTL 0x3C
+#define GORDON_REG_TPARAM1 0x40
+#define GORDON_REG_TLCDIF1 0x41
+#define GORDON_REG_TSSPB_ST1 0x42
+#define GORDON_REG_TSSPB_ED1 0x43
+#define GORDON_REG_TSCK_ST1 0x44
+#define GORDON_REG_TSCK_WD1 0x45
+#define GORDON_REG_TGSPB_VST1 0x46
+#define GORDON_REG_TGSPB_VED1 0x47
+#define GORDON_REG_TGSPB_CH1 0x48
+#define GORDON_REG_TGCK_ST1 0x49
+#define GORDON_REG_TGCK_ED1 0x4A
+#define GORDON_REG_TPCTL_ST1 0x4B
+#define GORDON_REG_TPCTL_ED1 0x4C
+#define GORDON_REG_TPCHG_ED1 0x4D
+#define GORDON_REG_TCOM_CH1 0x4E
+#define GORDON_REG_THBP1 0x4F
+#define GORDON_REG_TPHCTL1 0x50
+#define GORDON_REG_EVPH1 0x51
+#define GORDON_REG_EVPL1 0x52
+#define GORDON_REG_EVNH1 0x53
+#define GORDON_REG_EVNL1 0x54
+#define GORDON_REG_TBIAS1 0x55
+#define GORDON_REG_TPARAM2 0x56
+#define GORDON_REG_TLCDIF2 0x57
+#define GORDON_REG_TSSPB_ST2 0x58
+#define GORDON_REG_TSSPB_ED2 0x59
+#define GORDON_REG_TSCK_ST2 0x5A
+#define GORDON_REG_TSCK_WD2 0x5B
+#define GORDON_REG_TGSPB_VST2 0x5C
+#define GORDON_REG_TGSPB_VED2 0x5D
+#define GORDON_REG_TGSPB_CH2 0x5E
+#define GORDON_REG_TGCK_ST2 0x5F
+#define GORDON_REG_TGCK_ED2 0x60
+#define GORDON_REG_TPCTL_ST2 0x61
+#define GORDON_REG_TPCTL_ED2 0x62
+#define GORDON_REG_TPCHG_ED2 0x63
+#define GORDON_REG_TCOM_CH2 0x64
+#define GORDON_REG_THBP2 0x65
+#define GORDON_REG_TPHCTL2 0x66
+#define GORDON_REG_EVPH2 0x67
+#define GORDON_REG_EVPL2 0x68
+#define GORDON_REG_EVNH2 0x69
+#define GORDON_REG_EVNL2 0x6A
+#define GORDON_REG_TBIAS2 0x6B
+#define GORDON_REG_POWCTL 0x80
+#define GORDON_REG_POWOSC1 0x81
+#define GORDON_REG_POWOSC2 0x82
+#define GORDON_REG_POWSET 0x83
+#define GORDON_REG_POWTRM1 0x85
+#define GORDON_REG_POWTRM2 0x86
+#define GORDON_REG_POWTRM3 0x87
+#define GORDON_REG_POWTRMSEL 0x88
+#define GORDON_REG_POWHIZ 0x89
+
+void serigo(uint16 reg, uint8 data)
+{
+ uint32 mddi_val = 0;
+ mddi_queue_register_read(SSIINTS, &mddi_val, TRUE, 0);
+ if (mddi_val & (1 << 8))
+ mddi_wait(1);
+ /* No De-assert of CS and send 2 bytes */
+ mddi_val = 0x90000 | ((0x00FF & reg) << 8) | data;
+ mddi_queue_register_write(SSITX, mddi_val, TRUE, 0);
+}
+
+void gordon_init(void)
+{
+ /* Image interface settings ***/
+ serigo(GORDON_REG_IMGCTL2, 0x00);
+ serigo(GORDON_REG_IMGSET1, 0x01);
+
+ /* Exchange the RGB signal for J510(Softbank mobile) */
+ serigo(GORDON_REG_IMGSET2, 0x12);
+ serigo(GORDON_REG_LCDIFSET1, 0x00);
+ mddi_wait(2);
+
+ /* Pre-charge settings */
+ serigo(GORDON_REG_PCCTL, 0x09);
+ serigo(GORDON_REG_LCDIFCTL2, 0x1B);
+ mddi_wait(1);
+}
+
+void gordon_disp_on(void)
+{
+ /*gordon_dispmode setting */
+ /*VGA settings */
+ serigo(GORDON_REG_TPARAM1, 0x30);
+ serigo(GORDON_REG_TLCDIF1, 0x00);
+ serigo(GORDON_REG_TSSPB_ST1, 0x8B);
+ serigo(GORDON_REG_TSSPB_ED1, 0x93);
+ mddi_wait(2);
+ serigo(GORDON_REG_TSCK_ST1, 0x88);
+ serigo(GORDON_REG_TSCK_WD1, 0x00);
+ serigo(GORDON_REG_TGSPB_VST1, 0x01);
+ serigo(GORDON_REG_TGSPB_VED1, 0x02);
+ mddi_wait(2);
+ serigo(GORDON_REG_TGSPB_CH1, 0x5E);
+ serigo(GORDON_REG_TGCK_ST1, 0x80);
+ serigo(GORDON_REG_TGCK_ED1, 0x3C);
+ serigo(GORDON_REG_TPCTL_ST1, 0x50);
+ mddi_wait(2);
+ serigo(GORDON_REG_TPCTL_ED1, 0x74);
+ serigo(GORDON_REG_TPCHG_ED1, 0x78);
+ serigo(GORDON_REG_TCOM_CH1, 0x50);
+ serigo(GORDON_REG_THBP1, 0x84);
+ mddi_wait(2);
+ serigo(GORDON_REG_TPHCTL1, 0x00);
+ serigo(GORDON_REG_EVPH1, 0x70);
+ serigo(GORDON_REG_EVPL1, 0x64);
+ serigo(GORDON_REG_EVNH1, 0x56);
+ mddi_wait(2);
+ serigo(GORDON_REG_EVNL1, 0x48);
+ serigo(GORDON_REG_TBIAS1, 0x88);
+ mddi_wait(2);
+ serigo(GORDON_REG_TPARAM2, 0x28);
+ serigo(GORDON_REG_TLCDIF2, 0x14);
+ serigo(GORDON_REG_TSSPB_ST2, 0x49);
+ serigo(GORDON_REG_TSSPB_ED2, 0x4B);
+ mddi_wait(2);
+ serigo(GORDON_REG_TSCK_ST2, 0x4A);
+ serigo(GORDON_REG_TSCK_WD2, 0x02);
+ serigo(GORDON_REG_TGSPB_VST2, 0x02);
+ serigo(GORDON_REG_TGSPB_VED2, 0x03);
+ mddi_wait(2);
+ serigo(GORDON_REG_TGSPB_CH2, 0x2F);
+ serigo(GORDON_REG_TGCK_ST2, 0x40);
+ serigo(GORDON_REG_TGCK_ED2, 0x1E);
+ serigo(GORDON_REG_TPCTL_ST2, 0x2C);
+ mddi_wait(2);
+ serigo(GORDON_REG_TPCTL_ED2, 0x3A);
+ serigo(GORDON_REG_TPCHG_ED2, 0x3C);
+ serigo(GORDON_REG_TCOM_CH2, 0x28);
+ serigo(GORDON_REG_THBP2, 0x4D);
+ mddi_wait(2);
+ serigo(GORDON_REG_TPHCTL2, 0x1A);
+ mddi_wait(2);
+ serigo(GORDON_REG_IVBP1, 0x02);
+ serigo(GORDON_REG_IHBP1, 0x90);
+ serigo(GORDON_REG_IVNUM1, 0xA0);
+ serigo(GORDON_REG_IHNUM1, 0x78);
+ mddi_wait(2);
+ serigo(GORDON_REG_IVBP2, 0x02);
+ serigo(GORDON_REG_IHBP2, 0x48);
+ serigo(GORDON_REG_IVNUM2, 0x50);
+ serigo(GORDON_REG_IHNUM2, 0x3C);
+ mddi_wait(2);
+ serigo(GORDON_REG_POWCTL, 0x03);
+ mddi_wait(15);
+ serigo(GORDON_REG_POWCTL, 0x07);
+ mddi_wait(15);
+ serigo(GORDON_REG_POWCTL, 0x0F);
+ mddi_wait(15);
+ serigo(GORDON_REG_AVCTL, 0x03);
+ mddi_wait(15);
+ serigo(GORDON_REG_POWCTL, 0x1F);
+ mddi_wait(15);
+ serigo(GORDON_REG_POWCTL, 0x5F);
+ mddi_wait(15);
+ serigo(GORDON_REG_POWCTL, 0x7F);
+ mddi_wait(15);
+ serigo(GORDON_REG_LCDIFCTL1, 0x02);
+ mddi_wait(15);
+ serigo(GORDON_REG_IMGCTL1, 0x00);
+ mddi_wait(15);
+ serigo(GORDON_REG_LCDIFCTL3, 0x00);
+ mddi_wait(15);
+ serigo(GORDON_REG_VALTRAN, 0x01);
+ mddi_wait(15);
+ serigo(GORDON_REG_LCDIFCTL1, 0x03);
+ serigo(GORDON_REG_LCDIFCTL1, 0x03);
+ mddi_wait(1);
+}
+
+void gordon_disp_off(void)
+{
+ serigo(GORDON_REG_LCDIFCTL2, 0x7B);
+ serigo(GORDON_REG_VALTRAN, 0x01);
+ serigo(GORDON_REG_LCDIFCTL1, 0x02);
+ serigo(GORDON_REG_LCDIFCTL3, 0x01);
+ mddi_wait(20);
+ serigo(GORDON_REG_VALTRAN, 0x01);
+ serigo(GORDON_REG_IMGCTL1, 0x01);
+ serigo(GORDON_REG_LCDIFCTL1, 0x00);
+ mddi_wait(20);
+ serigo(GORDON_REG_POWCTL, 0x1F);
+ mddi_wait(40);
+ serigo(GORDON_REG_POWCTL, 0x07);
+ mddi_wait(40);
+ serigo(GORDON_REG_POWCTL, 0x03);
+ mddi_wait(40);
+ serigo(GORDON_REG_POWCTL, 0x00);
+ mddi_wait(40);
+}
+
+void gordon_disp_init(void)
+{
+ gordon_init();
+ mddi_wait(20);
+ gordon_disp_on();
+}
+
+static void toshiba_common_initial_setup(struct msm_fb_data_type *mfd)
+{
+ if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT) {
+ write_client_reg(DPSET0 , 0x4bec0066, TRUE);
+ write_client_reg(DPSET1 , 0x00000113, TRUE);
+ write_client_reg(DPSUS , 0x00000000, TRUE);
+ write_client_reg(DPRUN , 0x00000001, TRUE);
+ mddi_wait(5);
+ write_client_reg(SYSCKENA , 0x00000001, TRUE);
+ write_client_reg(CLKENB , 0x0000a0e9, TRUE);
+
+ write_client_reg(GPIODATA , 0x03FF0000, TRUE);
+ write_client_reg(GPIODIR , 0x0000024D, TRUE);
+ write_client_reg(GPIOSEL , 0x00000173, TRUE);
+ write_client_reg(GPIOPC , 0x03C300C0, TRUE);
+ write_client_reg(WKREQ , 0x00000000, TRUE);
+ write_client_reg(GPIOIS , 0x00000000, TRUE);
+ write_client_reg(GPIOIEV , 0x00000001, TRUE);
+ write_client_reg(GPIOIC , 0x000003FF, TRUE);
+ write_client_reg(GPIODATA , 0x00040004, TRUE);
+
+ write_client_reg(GPIODATA , 0x00080008, TRUE);
+ write_client_reg(DRAMPWR , 0x00000001, TRUE);
+ write_client_reg(CLKENB , 0x0000a0eb, TRUE);
+ write_client_reg(PWMCR , 0x00000000, TRUE);
+ mddi_wait(1);
+
+ write_client_reg(SSICTL , 0x00060399, TRUE);
+ write_client_reg(SSITIME , 0x00000100, TRUE);
+ write_client_reg(CNT_DIS , 0x00000002, TRUE);
+ write_client_reg(SSICTL , 0x0006039b, TRUE);
+
+ write_client_reg(SSITX , 0x00000000, TRUE);
+ mddi_wait(7);
+ write_client_reg(SSITX , 0x00000000, TRUE);
+ mddi_wait(7);
+ write_client_reg(SSITX , 0x00000000, TRUE);
+ mddi_wait(7);
+
+ write_client_reg(SSITX , 0x000800BA, TRUE);
+ write_client_reg(SSITX , 0x00000111, TRUE);
+ write_client_reg(SSITX , 0x00080036, TRUE);
+ write_client_reg(SSITX , 0x00000100, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x0008003A, TRUE);
+ write_client_reg(SSITX , 0x00000160, TRUE);
+ write_client_reg(SSITX , 0x000800B1, TRUE);
+ write_client_reg(SSITX , 0x0000015D, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800B2, TRUE);
+ write_client_reg(SSITX , 0x00000133, TRUE);
+ write_client_reg(SSITX , 0x000800B3, TRUE);
+ write_client_reg(SSITX , 0x00000122, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800B4, TRUE);
+ write_client_reg(SSITX , 0x00000102, TRUE);
+ write_client_reg(SSITX , 0x000800B5, TRUE);
+ write_client_reg(SSITX , 0x0000011E, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800B6, TRUE);
+ write_client_reg(SSITX , 0x00000127, TRUE);
+ write_client_reg(SSITX , 0x000800B7, TRUE);
+ write_client_reg(SSITX , 0x00000103, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800B9, TRUE);
+ write_client_reg(SSITX , 0x00000124, TRUE);
+ write_client_reg(SSITX , 0x000800BD, TRUE);
+ write_client_reg(SSITX , 0x000001A1, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800BB, TRUE);
+ write_client_reg(SSITX , 0x00000100, TRUE);
+ write_client_reg(SSITX , 0x000800BF, TRUE);
+ write_client_reg(SSITX , 0x00000101, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800BE, TRUE);
+ write_client_reg(SSITX , 0x00000100, TRUE);
+ write_client_reg(SSITX , 0x000800C0, TRUE);
+ write_client_reg(SSITX , 0x00000111, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800C1, TRUE);
+ write_client_reg(SSITX , 0x00000111, TRUE);
+ write_client_reg(SSITX , 0x000800C2, TRUE);
+ write_client_reg(SSITX , 0x00000111, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800C3, TRUE);
+ write_client_reg(SSITX , 0x00080132, TRUE);
+ write_client_reg(SSITX , 0x00000132, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800C4, TRUE);
+ write_client_reg(SSITX , 0x00080132, TRUE);
+ write_client_reg(SSITX , 0x00000132, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800C5, TRUE);
+ write_client_reg(SSITX , 0x00080132, TRUE);
+ write_client_reg(SSITX , 0x00000132, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800C6, TRUE);
+ write_client_reg(SSITX , 0x00080132, TRUE);
+ write_client_reg(SSITX , 0x00000132, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800C7, TRUE);
+ write_client_reg(SSITX , 0x00080164, TRUE);
+ write_client_reg(SSITX , 0x00000145, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800C8, TRUE);
+ write_client_reg(SSITX , 0x00000144, TRUE);
+ write_client_reg(SSITX , 0x000800C9, TRUE);
+ write_client_reg(SSITX , 0x00000152, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800CA, TRUE);
+ write_client_reg(SSITX , 0x00000100, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800EC, TRUE);
+ write_client_reg(SSITX , 0x00080101, TRUE);
+ write_client_reg(SSITX , 0x000001FC, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800CF, TRUE);
+ write_client_reg(SSITX , 0x00000101, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800D0, TRUE);
+ write_client_reg(SSITX , 0x00080110, TRUE);
+ write_client_reg(SSITX , 0x00000104, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800D1, TRUE);
+ write_client_reg(SSITX , 0x00000101, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800D2, TRUE);
+ write_client_reg(SSITX , 0x00080100, TRUE);
+ write_client_reg(SSITX , 0x00000128, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800D3, TRUE);
+ write_client_reg(SSITX , 0x00080100, TRUE);
+ write_client_reg(SSITX , 0x00000128, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800D4, TRUE);
+ write_client_reg(SSITX , 0x00080126, TRUE);
+ write_client_reg(SSITX , 0x000001A4, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800D5, TRUE);
+ write_client_reg(SSITX , 0x00000120, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800EF, TRUE);
+ write_client_reg(SSITX , 0x00080132, TRUE);
+ write_client_reg(SSITX , 0x00000100, TRUE);
+ mddi_wait(1);
+
+ write_client_reg(BITMAP0 , 0x032001E0, TRUE);
+ write_client_reg(BITMAP1 , 0x032001E0, TRUE);
+ write_client_reg(BITMAP2 , 0x014000F0, TRUE);
+ write_client_reg(BITMAP3 , 0x014000F0, TRUE);
+ write_client_reg(BITMAP4 , 0x014000F0, TRUE);
+ write_client_reg(CLKENB , 0x0000A1EB, TRUE);
+ write_client_reg(PORT_ENB , 0x00000001, TRUE);
+ write_client_reg(PORT , 0x00000004, TRUE);
+ write_client_reg(PXL , 0x00000002, TRUE);
+ write_client_reg(MPLFBUF , 0x00000000, TRUE);
+ write_client_reg(HCYCLE , 0x000000FD, TRUE);
+ write_client_reg(HSW , 0x00000003, TRUE);
+ write_client_reg(HDE_START , 0x00000007, TRUE);
+ write_client_reg(HDE_SIZE , 0x000000EF, TRUE);
+ write_client_reg(VCYCLE , 0x00000325, TRUE);
+ write_client_reg(VSW , 0x00000001, TRUE);
+ write_client_reg(VDE_START , 0x00000003, TRUE);
+ write_client_reg(VDE_SIZE , 0x0000031F, TRUE);
+ write_client_reg(START , 0x00000001, TRUE);
+ mddi_wait(32);
+ write_client_reg(SSITX , 0x000800BC, TRUE);
+ write_client_reg(SSITX , 0x00000180, TRUE);
+ write_client_reg(SSITX , 0x0008003B, TRUE);
+ write_client_reg(SSITX , 0x00000100, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800B0, TRUE);
+ write_client_reg(SSITX , 0x00000116, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x000800B8, TRUE);
+ write_client_reg(SSITX , 0x000801FF, TRUE);
+ write_client_reg(SSITX , 0x000001F5, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX , 0x00000011, TRUE);
+ mddi_wait(5);
+ write_client_reg(SSITX , 0x00000029, TRUE);
+ return;
+ }
+
+ if (TM_GET_PID(mfd->panel.id) == LCD_SHARP_2P4_VGA) {
+ write_client_reg(DPSET0, 0x4BEC0066, TRUE);
+ write_client_reg(DPSET1, 0x00000113, TRUE);
+ write_client_reg(DPSUS, 0x00000000, TRUE);
+ write_client_reg(DPRUN, 0x00000001, TRUE);
+ mddi_wait(14);
+ write_client_reg(SYSCKENA, 0x00000001, TRUE);
+ write_client_reg(CLKENB, 0x000000EF, TRUE);
+ write_client_reg(GPIO_BLOCK_BASE, 0x03FF0000, TRUE);
+ write_client_reg(GPIODIR, 0x0000024D, TRUE);
+ write_client_reg(SYSTEM_BLOCK2_BASE, 0x00000173, TRUE);
+ write_client_reg(GPIOPC, 0x03C300C0, TRUE);
+ write_client_reg(SYSTEM_BLOCK1_BASE, 0x00000000, TRUE);
+ write_client_reg(GPIOIS, 0x00000000, TRUE);
+ write_client_reg(GPIOIEV, 0x00000001, TRUE);
+ write_client_reg(GPIOIC, 0x000003FF, TRUE);
+ write_client_reg(GPIO_BLOCK_BASE, 0x00060006, TRUE);
+ write_client_reg(GPIO_BLOCK_BASE, 0x00080008, TRUE);
+ write_client_reg(GPIO_BLOCK_BASE, 0x02000200, TRUE);
+ write_client_reg(DRAMPWR, 0x00000001, TRUE);
+ write_client_reg(TIMER0CTRL, 0x00000060, TRUE);
+ write_client_reg(PWM_BLOCK_BASE, 0x00001388, TRUE);
+ write_client_reg(PWM0OFF, 0x00001387, TRUE);
+ write_client_reg(TIMER1CTRL, 0x00000060, TRUE);
+ write_client_reg(TIMER1LOAD, 0x00001388, TRUE);
+ write_client_reg(PWM1OFF, 0x00001387, TRUE);
+ write_client_reg(TIMER0CTRL, 0x000000E0, TRUE);
+ write_client_reg(TIMER1CTRL, 0x000000E0, TRUE);
+ write_client_reg(PWMCR, 0x00000003, TRUE);
+ mddi_wait(1);
+ write_client_reg(SPI_BLOCK_BASE, 0x00063111, TRUE);
+ write_client_reg(SSITIME, 0x00000100, TRUE);
+ write_client_reg(SPI_BLOCK_BASE, 0x00063113, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX, 0x00000000, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX, 0x00000000, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX, 0x00000000, TRUE);
+ mddi_wait(1);
+ write_client_reg(CLKENB, 0x0000A1EF, TRUE);
+ write_client_reg(START, 0x00000000, TRUE);
+ write_client_reg(WRSTB, 0x0000003F, TRUE);
+ write_client_reg(RDSTB, 0x00000432, TRUE);
+ write_client_reg(PORT_ENB, 0x00000002, TRUE);
+ write_client_reg(VSYNIF, 0x00000000, TRUE);
+ write_client_reg(ASY_DATA, 0x80000000, TRUE);
+ write_client_reg(ASY_DATB, 0x00000001, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(10);
+ write_client_reg(ASY_DATA, 0x80000000, TRUE);
+ write_client_reg(ASY_DATB, 0x80000000, TRUE);
+ write_client_reg(ASY_DATC, 0x80000000, TRUE);
+ write_client_reg(ASY_DATD, 0x80000000, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000009, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000008, TRUE);
+ write_client_reg(ASY_DATA, 0x80000007, TRUE);
+ write_client_reg(ASY_DATB, 0x00004005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(20);
+ write_client_reg(ASY_DATA, 0x80000059, TRUE);
+ write_client_reg(ASY_DATB, 0x00000000, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+
+ write_client_reg(VSYNIF, 0x00000001, TRUE);
+ write_client_reg(PORT_ENB, 0x00000001, TRUE);
+ } else {
+ write_client_reg(DPSET0, 0x4BEC0066, TRUE);
+ write_client_reg(DPSET1, 0x00000113, TRUE);
+ write_client_reg(DPSUS, 0x00000000, TRUE);
+ write_client_reg(DPRUN, 0x00000001, TRUE);
+ mddi_wait(14);
+ write_client_reg(SYSCKENA, 0x00000001, TRUE);
+ write_client_reg(CLKENB, 0x000000EF, TRUE);
+ write_client_reg(GPIODATA, 0x03FF0000, TRUE);
+ write_client_reg(GPIODIR, 0x0000024D, TRUE);
+ write_client_reg(GPIOSEL, 0x00000173, TRUE);
+ write_client_reg(GPIOPC, 0x03C300C0, TRUE);
+ write_client_reg(WKREQ, 0x00000000, TRUE);
+ write_client_reg(GPIOIS, 0x00000000, TRUE);
+ write_client_reg(GPIOIEV, 0x00000001, TRUE);
+ write_client_reg(GPIOIC, 0x000003FF, TRUE);
+ write_client_reg(GPIODATA, 0x00060006, TRUE);
+ write_client_reg(GPIODATA, 0x00080008, TRUE);
+ write_client_reg(GPIODATA, 0x02000200, TRUE);
+
+ if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA) {
+ mddi_wait(400);
+ write_client_reg(DRAMPWR, 0x00000001, TRUE);
+
+ write_client_reg(CNT_DIS, 0x00000002, TRUE);
+ write_client_reg(BITMAP0, 0x01E00320, TRUE);
+ write_client_reg(PORT_ENB, 0x00000001, TRUE);
+ write_client_reg(PORT, 0x00000004, TRUE);
+ write_client_reg(PXL, 0x0000003A, TRUE);
+ write_client_reg(MPLFBUF, 0x00000000, TRUE);
+ write_client_reg(HCYCLE, 0x00000253, TRUE);
+ write_client_reg(HSW, 0x00000003, TRUE);
+ write_client_reg(HDE_START, 0x00000017, TRUE);
+ write_client_reg(HDE_SIZE, 0x0000018F, TRUE);
+ write_client_reg(VCYCLE, 0x000001FF, TRUE);
+ write_client_reg(VSW, 0x00000001, TRUE);
+ write_client_reg(VDE_START, 0x00000003, TRUE);
+ write_client_reg(VDE_SIZE, 0x000001DF, TRUE);
+ write_client_reg(START, 0x00000001, TRUE);
+ mddi_wait(1);
+ write_client_reg(TIMER0CTRL, 0x00000060, TRUE);
+ write_client_reg(TIMER0LOAD, 0x00001388, TRUE);
+ write_client_reg(TIMER1CTRL, 0x00000060, TRUE);
+ write_client_reg(TIMER1LOAD, 0x00001388, TRUE);
+ write_client_reg(PWM1OFF, 0x00000087, TRUE);
+ } else {
+ write_client_reg(DRAMPWR, 0x00000001, TRUE);
+ write_client_reg(TIMER0CTRL, 0x00000060, TRUE);
+ write_client_reg(TIMER0LOAD, 0x00001388, TRUE);
+ write_client_reg(TIMER1CTRL, 0x00000060, TRUE);
+ write_client_reg(TIMER1LOAD, 0x00001388, TRUE);
+ write_client_reg(PWM1OFF, 0x00001387, TRUE);
+ }
+
+ write_client_reg(TIMER0CTRL, 0x000000E0, TRUE);
+ write_client_reg(TIMER1CTRL, 0x000000E0, TRUE);
+ write_client_reg(PWMCR, 0x00000003, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSICTL, 0x00000799, TRUE);
+ write_client_reg(SSITIME, 0x00000100, TRUE);
+ write_client_reg(SSICTL, 0x0000079b, TRUE);
+ write_client_reg(SSITX, 0x00000000, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX, 0x00000000, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX, 0x00000000, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX, 0x000800BA, TRUE);
+ write_client_reg(SSITX, 0x00000111, TRUE);
+ write_client_reg(SSITX, 0x00080036, TRUE);
+ write_client_reg(SSITX, 0x00000100, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800BB, TRUE);
+ write_client_reg(SSITX, 0x00000100, TRUE);
+ write_client_reg(SSITX, 0x0008003A, TRUE);
+ write_client_reg(SSITX, 0x00000160, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800BF, TRUE);
+ write_client_reg(SSITX, 0x00000100, TRUE);
+ write_client_reg(SSITX, 0x000800B1, TRUE);
+ write_client_reg(SSITX, 0x0000015D, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800B2, TRUE);
+ write_client_reg(SSITX, 0x00000133, TRUE);
+ write_client_reg(SSITX, 0x000800B3, TRUE);
+ write_client_reg(SSITX, 0x00000122, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800B4, TRUE);
+ write_client_reg(SSITX, 0x00000102, TRUE);
+ write_client_reg(SSITX, 0x000800B5, TRUE);
+ write_client_reg(SSITX, 0x0000011F, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800B6, TRUE);
+ write_client_reg(SSITX, 0x00000128, TRUE);
+ write_client_reg(SSITX, 0x000800B7, TRUE);
+ write_client_reg(SSITX, 0x00000103, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800B9, TRUE);
+ write_client_reg(SSITX, 0x00000120, TRUE);
+ write_client_reg(SSITX, 0x000800BD, TRUE);
+ write_client_reg(SSITX, 0x00000102, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800BE, TRUE);
+ write_client_reg(SSITX, 0x00000100, TRUE);
+ write_client_reg(SSITX, 0x000800C0, TRUE);
+ write_client_reg(SSITX, 0x00000111, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800C1, TRUE);
+ write_client_reg(SSITX, 0x00000111, TRUE);
+ write_client_reg(SSITX, 0x000800C2, TRUE);
+ write_client_reg(SSITX, 0x00000111, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800C3, TRUE);
+ write_client_reg(SSITX, 0x0008010A, TRUE);
+ write_client_reg(SSITX, 0x0000010A, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800C4, TRUE);
+ write_client_reg(SSITX, 0x00080160, TRUE);
+ write_client_reg(SSITX, 0x00000160, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800C5, TRUE);
+ write_client_reg(SSITX, 0x00080160, TRUE);
+ write_client_reg(SSITX, 0x00000160, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800C6, TRUE);
+ write_client_reg(SSITX, 0x00080160, TRUE);
+ write_client_reg(SSITX, 0x00000160, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800C7, TRUE);
+ write_client_reg(SSITX, 0x00080133, TRUE);
+ write_client_reg(SSITX, 0x00000143, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800C8, TRUE);
+ write_client_reg(SSITX, 0x00000144, TRUE);
+ write_client_reg(SSITX, 0x000800C9, TRUE);
+ write_client_reg(SSITX, 0x00000133, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800CA, TRUE);
+ write_client_reg(SSITX, 0x00000100, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800EC, TRUE);
+ write_client_reg(SSITX, 0x00080102, TRUE);
+ write_client_reg(SSITX, 0x00000118, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800CF, TRUE);
+ write_client_reg(SSITX, 0x00000101, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800D0, TRUE);
+ write_client_reg(SSITX, 0x00080110, TRUE);
+ write_client_reg(SSITX, 0x00000104, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800D1, TRUE);
+ write_client_reg(SSITX, 0x00000101, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800D2, TRUE);
+ write_client_reg(SSITX, 0x00080100, TRUE);
+ write_client_reg(SSITX, 0x0000013A, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800D3, TRUE);
+ write_client_reg(SSITX, 0x00080100, TRUE);
+ write_client_reg(SSITX, 0x0000013A, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800D4, TRUE);
+ write_client_reg(SSITX, 0x00080124, TRUE);
+ write_client_reg(SSITX, 0x0000016E, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX, 0x000800D5, TRUE);
+ write_client_reg(SSITX, 0x00000124, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800ED, TRUE);
+ write_client_reg(SSITX, 0x00080101, TRUE);
+ write_client_reg(SSITX, 0x0000010A, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800D6, TRUE);
+ write_client_reg(SSITX, 0x00000101, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800D7, TRUE);
+ write_client_reg(SSITX, 0x00080110, TRUE);
+ write_client_reg(SSITX, 0x0000010A, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800D8, TRUE);
+ write_client_reg(SSITX, 0x00000101, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800D9, TRUE);
+ write_client_reg(SSITX, 0x00080100, TRUE);
+ write_client_reg(SSITX, 0x00000114, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800DE, TRUE);
+ write_client_reg(SSITX, 0x00080100, TRUE);
+ write_client_reg(SSITX, 0x00000114, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800DF, TRUE);
+ write_client_reg(SSITX, 0x00080112, TRUE);
+ write_client_reg(SSITX, 0x0000013F, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800E0, TRUE);
+ write_client_reg(SSITX, 0x0000010B, TRUE);
+ write_client_reg(SSITX, 0x000800E2, TRUE);
+ write_client_reg(SSITX, 0x00000101, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800E3, TRUE);
+ write_client_reg(SSITX, 0x00000136, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800E4, TRUE);
+ write_client_reg(SSITX, 0x00080100, TRUE);
+ write_client_reg(SSITX, 0x00000103, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800E5, TRUE);
+ write_client_reg(SSITX, 0x00080102, TRUE);
+ write_client_reg(SSITX, 0x00000104, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800E6, TRUE);
+ write_client_reg(SSITX, 0x00000103, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800E7, TRUE);
+ write_client_reg(SSITX, 0x00080104, TRUE);
+ write_client_reg(SSITX, 0x0000010A, TRUE);
+ mddi_wait(2);
+ write_client_reg(SSITX, 0x000800E8, TRUE);
+ write_client_reg(SSITX, 0x00000104, TRUE);
+ write_client_reg(CLKENB, 0x000001EF, TRUE);
+ write_client_reg(START, 0x00000000, TRUE);
+ write_client_reg(WRSTB, 0x0000003F, TRUE);
+ write_client_reg(RDSTB, 0x00000432, TRUE);
+ write_client_reg(PORT_ENB, 0x00000002, TRUE);
+ write_client_reg(VSYNIF, 0x00000000, TRUE);
+ write_client_reg(ASY_DATA, 0x80000000, TRUE);
+ write_client_reg(ASY_DATB, 0x00000001, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(10);
+ write_client_reg(ASY_DATA, 0x80000000, TRUE);
+ write_client_reg(ASY_DATB, 0x80000000, TRUE);
+ write_client_reg(ASY_DATC, 0x80000000, TRUE);
+ write_client_reg(ASY_DATD, 0x80000000, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000009, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000008, TRUE);
+ write_client_reg(ASY_DATA, 0x80000007, TRUE);
+ write_client_reg(ASY_DATB, 0x00004005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(20);
+ write_client_reg(ASY_DATA, 0x80000059, TRUE);
+ write_client_reg(ASY_DATB, 0x00000000, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ write_client_reg(VSYNIF, 0x00000001, TRUE);
+ write_client_reg(PORT_ENB, 0x00000001, TRUE);
+ }
+
+ mddi_toshiba_state_transition(TOSHIBA_STATE_PRIM_SEC_STANDBY,
+ TOSHIBA_STATE_PRIM_SEC_READY);
+}
+
+static void toshiba_prim_start(struct msm_fb_data_type *mfd)
+{
+ if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+ return;
+
+ if (TM_GET_PID(mfd->panel.id) == LCD_SHARP_2P4_VGA) {
+ write_client_reg(BITMAP1, 0x01E000F0, TRUE);
+ write_client_reg(BITMAP2, 0x01E000F0, TRUE);
+ write_client_reg(BITMAP3, 0x01E000F0, TRUE);
+ write_client_reg(BITMAP4, 0x00DC00B0, TRUE);
+ write_client_reg(CLKENB, 0x000001EF, TRUE);
+ write_client_reg(PORT_ENB, 0x00000001, TRUE);
+ write_client_reg(PORT, 0x00000016, TRUE);
+ write_client_reg(PXL, 0x00000002, TRUE);
+ write_client_reg(MPLFBUF, 0x00000000, TRUE);
+ write_client_reg(HCYCLE, 0x00000185, TRUE);
+ write_client_reg(HSW, 0x00000018, TRUE);
+ write_client_reg(HDE_START, 0x0000004A, TRUE);
+ write_client_reg(HDE_SIZE, 0x000000EF, TRUE);
+ write_client_reg(VCYCLE, 0x0000028E, TRUE);
+ write_client_reg(VSW, 0x00000004, TRUE);
+ write_client_reg(VDE_START, 0x00000009, TRUE);
+ write_client_reg(VDE_SIZE, 0x0000027F, TRUE);
+ write_client_reg(START, 0x00000001, TRUE);
+ write_client_reg(SYSTEM_BLOCK1_BASE, 0x00000002, TRUE);
+ } else{
+
+ write_client_reg(VSYNIF, 0x00000001, TRUE);
+ write_client_reg(PORT_ENB, 0x00000001, TRUE);
+ write_client_reg(BITMAP1, 0x01E000F0, TRUE);
+ write_client_reg(BITMAP2, 0x01E000F0, TRUE);
+ write_client_reg(BITMAP3, 0x01E000F0, TRUE);
+ write_client_reg(BITMAP4, 0x00DC00B0, TRUE);
+ write_client_reg(CLKENB, 0x000001EF, TRUE);
+ write_client_reg(PORT_ENB, 0x00000001, TRUE);
+ write_client_reg(PORT, 0x00000004, TRUE);
+ write_client_reg(PXL, 0x00000002, TRUE);
+ write_client_reg(MPLFBUF, 0x00000000, TRUE);
+
+ if (mddi_toshiba_61Hz_refresh) {
+ write_client_reg(HCYCLE, 0x000000FC, TRUE);
+ mddi_toshiba_rows_per_second = 39526;
+ mddi_toshiba_rows_per_refresh = 646;
+ mddi_toshiba_usecs_per_refresh = 16344;
+ } else {
+ write_client_reg(HCYCLE, 0x0000010b, TRUE);
+ mddi_toshiba_rows_per_second = 37313;
+ mddi_toshiba_rows_per_refresh = 646;
+ mddi_toshiba_usecs_per_refresh = 17313;
+ }
+
+ write_client_reg(HSW, 0x00000003, TRUE);
+ write_client_reg(HDE_START, 0x00000007, TRUE);
+ write_client_reg(HDE_SIZE, 0x000000EF, TRUE);
+ write_client_reg(VCYCLE, 0x00000285, TRUE);
+ write_client_reg(VSW, 0x00000001, TRUE);
+ write_client_reg(VDE_START, 0x00000003, TRUE);
+ write_client_reg(VDE_SIZE, 0x0000027F, TRUE);
+ write_client_reg(START, 0x00000001, TRUE);
+ mddi_wait(10);
+ write_client_reg(SSITX, 0x000800BC, TRUE);
+ write_client_reg(SSITX, 0x00000180, TRUE);
+ write_client_reg(SSITX, 0x0008003B, TRUE);
+ write_client_reg(SSITX, 0x00000100, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX, 0x000800B0, TRUE);
+ write_client_reg(SSITX, 0x00000116, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX, 0x000800B8, TRUE);
+ write_client_reg(SSITX, 0x000801FF, TRUE);
+ write_client_reg(SSITX, 0x000001F5, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX, 0x00000011, TRUE);
+ write_client_reg(SSITX, 0x00000029, TRUE);
+ write_client_reg(WKREQ, 0x00000000, TRUE);
+ write_client_reg(WAKEUP, 0x00000000, TRUE);
+ write_client_reg(INTMSK, 0x00000001, TRUE);
+ }
+
+ mddi_toshiba_state_transition(TOSHIBA_STATE_PRIM_SEC_READY,
+ TOSHIBA_STATE_PRIM_NORMAL_MODE);
+}
+
+static void toshiba_sec_start(struct msm_fb_data_type *mfd)
+{
+ if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+ return;
+
+ write_client_reg(VSYNIF, 0x00000000, TRUE);
+ write_client_reg(PORT_ENB, 0x00000002, TRUE);
+ write_client_reg(CLKENB, 0x000011EF, TRUE);
+ write_client_reg(BITMAP0, 0x028001E0, TRUE);
+ write_client_reg(BITMAP1, 0x00000000, TRUE);
+ write_client_reg(BITMAP2, 0x00000000, TRUE);
+ write_client_reg(BITMAP3, 0x00000000, TRUE);
+ write_client_reg(BITMAP4, 0x00DC00B0, TRUE);
+ write_client_reg(PORT, 0x00000000, TRUE);
+ write_client_reg(PXL, 0x00000000, TRUE);
+ write_client_reg(MPLFBUF, 0x00000004, TRUE);
+ write_client_reg(HCYCLE, 0x0000006B, TRUE);
+ write_client_reg(HSW, 0x00000003, TRUE);
+ write_client_reg(HDE_START, 0x00000007, TRUE);
+ write_client_reg(HDE_SIZE, 0x00000057, TRUE);
+ write_client_reg(VCYCLE, 0x000000E6, TRUE);
+ write_client_reg(VSW, 0x00000001, TRUE);
+ write_client_reg(VDE_START, 0x00000003, TRUE);
+ write_client_reg(VDE_SIZE, 0x000000DB, TRUE);
+ write_client_reg(ASY_DATA, 0x80000001, TRUE);
+ write_client_reg(ASY_DATB, 0x0000011B, TRUE);
+ write_client_reg(ASY_DATC, 0x80000002, TRUE);
+ write_client_reg(ASY_DATD, 0x00000700, TRUE);
+ write_client_reg(ASY_DATE, 0x80000003, TRUE);
+ write_client_reg(ASY_DATF, 0x00000230, TRUE);
+ write_client_reg(ASY_DATG, 0x80000008, TRUE);
+ write_client_reg(ASY_DATH, 0x00000402, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+ write_client_reg(ASY_DATA, 0x80000009, TRUE);
+ write_client_reg(ASY_DATB, 0x00000000, TRUE);
+ write_client_reg(ASY_DATC, 0x8000000B, TRUE);
+ write_client_reg(ASY_DATD, 0x00000000, TRUE);
+ write_client_reg(ASY_DATE, 0x8000000C, TRUE);
+ write_client_reg(ASY_DATF, 0x00000000, TRUE);
+ write_client_reg(ASY_DATG, 0x8000000D, TRUE);
+ write_client_reg(ASY_DATH, 0x00000409, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+ write_client_reg(ASY_DATA, 0x8000000E, TRUE);
+ write_client_reg(ASY_DATB, 0x00000409, TRUE);
+ write_client_reg(ASY_DATC, 0x80000030, TRUE);
+ write_client_reg(ASY_DATD, 0x00000000, TRUE);
+ write_client_reg(ASY_DATE, 0x80000031, TRUE);
+ write_client_reg(ASY_DATF, 0x00000100, TRUE);
+ write_client_reg(ASY_DATG, 0x80000032, TRUE);
+ write_client_reg(ASY_DATH, 0x00000104, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+ write_client_reg(ASY_DATA, 0x80000033, TRUE);
+ write_client_reg(ASY_DATB, 0x00000400, TRUE);
+ write_client_reg(ASY_DATC, 0x80000034, TRUE);
+ write_client_reg(ASY_DATD, 0x00000306, TRUE);
+ write_client_reg(ASY_DATE, 0x80000035, TRUE);
+ write_client_reg(ASY_DATF, 0x00000706, TRUE);
+ write_client_reg(ASY_DATG, 0x80000036, TRUE);
+ write_client_reg(ASY_DATH, 0x00000707, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+ write_client_reg(ASY_DATA, 0x80000037, TRUE);
+ write_client_reg(ASY_DATB, 0x00000004, TRUE);
+ write_client_reg(ASY_DATC, 0x80000038, TRUE);
+ write_client_reg(ASY_DATD, 0x00000000, TRUE);
+ write_client_reg(ASY_DATE, 0x80000039, TRUE);
+ write_client_reg(ASY_DATF, 0x00000000, TRUE);
+ write_client_reg(ASY_DATG, 0x8000003A, TRUE);
+ write_client_reg(ASY_DATH, 0x00000001, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+ write_client_reg(ASY_DATA, 0x80000044, TRUE);
+ write_client_reg(ASY_DATB, 0x0000AF00, TRUE);
+ write_client_reg(ASY_DATC, 0x80000045, TRUE);
+ write_client_reg(ASY_DATD, 0x0000DB00, TRUE);
+ write_client_reg(ASY_DATE, 0x08000042, TRUE);
+ write_client_reg(ASY_DATF, 0x0000DB00, TRUE);
+ write_client_reg(ASY_DATG, 0x80000021, TRUE);
+ write_client_reg(ASY_DATH, 0x00000000, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+ write_client_reg(PXL, 0x0000000C, TRUE);
+ write_client_reg(VSYNIF, 0x00000001, TRUE);
+ write_client_reg(ASY_DATA, 0x80000022, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000003, TRUE);
+ write_client_reg(START, 0x00000001, TRUE);
+ mddi_wait(60);
+ write_client_reg(PXL, 0x00000000, TRUE);
+ write_client_reg(VSYNIF, 0x00000000, TRUE);
+ write_client_reg(START, 0x00000000, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+ write_client_reg(ASY_DATA, 0x80000050, TRUE);
+ write_client_reg(ASY_DATB, 0x00000000, TRUE);
+ write_client_reg(ASY_DATC, 0x80000051, TRUE);
+ write_client_reg(ASY_DATD, 0x00000E00, TRUE);
+ write_client_reg(ASY_DATE, 0x80000052, TRUE);
+ write_client_reg(ASY_DATF, 0x00000D01, TRUE);
+ write_client_reg(ASY_DATG, 0x80000053, TRUE);
+ write_client_reg(ASY_DATH, 0x00000000, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+ write_client_reg(ASY_DATA, 0x80000058, TRUE);
+ write_client_reg(ASY_DATB, 0x00000000, TRUE);
+ write_client_reg(ASY_DATC, 0x8000005A, TRUE);
+ write_client_reg(ASY_DATD, 0x00000E01, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000009, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000008, TRUE);
+ write_client_reg(ASY_DATA, 0x80000011, TRUE);
+ write_client_reg(ASY_DATB, 0x00000812, TRUE);
+ write_client_reg(ASY_DATC, 0x80000012, TRUE);
+ write_client_reg(ASY_DATD, 0x00000003, TRUE);
+ write_client_reg(ASY_DATE, 0x80000013, TRUE);
+ write_client_reg(ASY_DATF, 0x00000909, TRUE);
+ write_client_reg(ASY_DATG, 0x80000010, TRUE);
+ write_client_reg(ASY_DATH, 0x00000040, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+ mddi_wait(40);
+ write_client_reg(ASY_DATA, 0x80000010, TRUE);
+ write_client_reg(ASY_DATB, 0x00000340, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(60);
+ write_client_reg(ASY_DATA, 0x80000010, TRUE);
+ write_client_reg(ASY_DATB, 0x00003340, TRUE);
+ write_client_reg(ASY_DATC, 0x80000007, TRUE);
+ write_client_reg(ASY_DATD, 0x00004007, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000009, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000008, TRUE);
+ mddi_wait(1);
+ write_client_reg(ASY_DATA, 0x80000007, TRUE);
+ write_client_reg(ASY_DATB, 0x00004017, TRUE);
+ write_client_reg(ASY_DATC, 0x8000005B, TRUE);
+ write_client_reg(ASY_DATD, 0x00000000, TRUE);
+ write_client_reg(ASY_DATE, 0x80000059, TRUE);
+ write_client_reg(ASY_DATF, 0x00000011, TRUE);
+ write_client_reg(ASY_CMDSET, 0x0000000D, TRUE);
+ write_client_reg(ASY_CMDSET, 0x0000000C, TRUE);
+ mddi_wait(20);
+ write_client_reg(ASY_DATA, 0x80000059, TRUE);
+ /* LTPS I/F control */
+ write_client_reg(ASY_DATB, 0x00000019, TRUE);
+ /* Direct cmd transfer enable */
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ /* Direct cmd transfer disable */
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(20);
+ /* Index setting of SUB LCDD */
+ write_client_reg(ASY_DATA, 0x80000059, TRUE);
+ /* LTPS I/F control */
+ write_client_reg(ASY_DATB, 0x00000079, TRUE);
+ /* Direct cmd transfer enable */
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ /* Direct cmd transfer disable */
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(20);
+ /* Index setting of SUB LCDD */
+ write_client_reg(ASY_DATA, 0x80000059, TRUE);
+ /* LTPS I/F control */
+ write_client_reg(ASY_DATB, 0x000003FD, TRUE);
+ /* Direct cmd transfer enable */
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ /* Direct cmd transfer disable */
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(20);
+ mddi_toshiba_state_transition(TOSHIBA_STATE_PRIM_SEC_READY,
+ TOSHIBA_STATE_SEC_NORMAL_MODE);
+}
+
+static void toshiba_prim_lcd_off(struct msm_fb_data_type *mfd)
+{
+ if (TM_GET_PID(mfd->panel.id) == LCD_SHARP_2P4_VGA) {
+ gordon_disp_off();
+ } else{
+
+ /* Main panel power off (Deep standby in) */
+ write_client_reg(SSITX, 0x000800BC, TRUE);
+ write_client_reg(SSITX, 0x00000100, TRUE);
+ write_client_reg(SSITX, 0x00000028, TRUE);
+ mddi_wait(1);
+ write_client_reg(SSITX, 0x000800B8, TRUE);
+ write_client_reg(SSITX, 0x00000180, TRUE);
+ write_client_reg(SSITX, 0x00000102, TRUE);
+ write_client_reg(SSITX, 0x00000010, TRUE);
+ }
+ write_client_reg(PORT, 0x00000003, TRUE);
+ write_client_reg(REGENB, 0x00000001, TRUE);
+ mddi_wait(1);
+ write_client_reg(PXL, 0x00000000, TRUE);
+ write_client_reg(START, 0x00000000, TRUE);
+ write_client_reg(REGENB, 0x00000001, TRUE);
+ mddi_wait(3);
+ if (TM_GET_PID(mfd->panel.id) != LCD_SHARP_2P4_VGA) {
+ write_client_reg(SSITX, 0x000800B0, TRUE);
+ write_client_reg(SSITX, 0x00000100, TRUE);
+ }
+ mddi_toshiba_state_transition(TOSHIBA_STATE_PRIM_NORMAL_MODE,
+ TOSHIBA_STATE_PRIM_SEC_STANDBY);
+}
+
+static void toshiba_sec_lcd_off(struct msm_fb_data_type *mfd)
+{
+ if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+ return;
+
+ write_client_reg(VSYNIF, 0x00000000, TRUE);
+ write_client_reg(PORT_ENB, 0x00000002, TRUE);
+ write_client_reg(ASY_DATA, 0x80000007, TRUE);
+ write_client_reg(ASY_DATB, 0x00004016, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(2);
+ write_client_reg(ASY_DATA, 0x80000059, TRUE);
+ write_client_reg(ASY_DATB, 0x00000019, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(2);
+ write_client_reg(ASY_DATA, 0x80000059, TRUE);
+ write_client_reg(ASY_DATB, 0x0000000B, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(2);
+ write_client_reg(ASY_DATA, 0x80000059, TRUE);
+ write_client_reg(ASY_DATB, 0x00000002, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(4);
+ write_client_reg(ASY_DATA, 0x80000010, TRUE);
+ write_client_reg(ASY_DATB, 0x00000300, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(4);
+ write_client_reg(ASY_DATA, 0x80000059, TRUE);
+ write_client_reg(ASY_DATB, 0x00000000, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(2);
+ write_client_reg(ASY_DATA, 0x80000007, TRUE);
+ write_client_reg(ASY_DATB, 0x00004004, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(2);
+ write_client_reg(PORT, 0x00000000, TRUE);
+ write_client_reg(PXL, 0x00000000, TRUE);
+ write_client_reg(START, 0x00000000, TRUE);
+ write_client_reg(VSYNIF, 0x00000001, TRUE);
+ write_client_reg(PORT_ENB, 0x00000001, TRUE);
+ write_client_reg(REGENB, 0x00000001, TRUE);
+ mddi_toshiba_state_transition(TOSHIBA_STATE_SEC_NORMAL_MODE,
+ TOSHIBA_STATE_PRIM_SEC_STANDBY);
+}
+
+static void toshiba_sec_cont_update_start(struct msm_fb_data_type *mfd)
+{
+
+ if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+ return;
+
+ write_client_reg(VSYNIF, 0x00000000, TRUE);
+ write_client_reg(PORT_ENB, 0x00000002, TRUE);
+ write_client_reg(INTMASK, 0x00000001, TRUE);
+ write_client_reg(TTBUSSEL, 0x0000000B, TRUE);
+ write_client_reg(MONI, 0x00000008, TRUE);
+ write_client_reg(CLKENB, 0x000000EF, TRUE);
+ write_client_reg(CLKENB, 0x000010EF, TRUE);
+ write_client_reg(CLKENB, 0x000011EF, TRUE);
+ write_client_reg(BITMAP4, 0x00DC00B0, TRUE);
+ write_client_reg(HCYCLE, 0x0000006B, TRUE);
+ write_client_reg(HSW, 0x00000003, TRUE);
+ write_client_reg(HDE_START, 0x00000002, TRUE);
+ write_client_reg(HDE_SIZE, 0x00000057, TRUE);
+ write_client_reg(VCYCLE, 0x000000E6, TRUE);
+ write_client_reg(VSW, 0x00000001, TRUE);
+ write_client_reg(VDE_START, 0x00000003, TRUE);
+ write_client_reg(VDE_SIZE, 0x000000DB, TRUE);
+ write_client_reg(WRSTB, 0x00000015, TRUE);
+ write_client_reg(MPLFBUF, 0x00000004, TRUE);
+ write_client_reg(ASY_DATA, 0x80000021, TRUE);
+ write_client_reg(ASY_DATB, 0x00000000, TRUE);
+ write_client_reg(ASY_DATC, 0x80000022, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000007, TRUE);
+ write_client_reg(PXL, 0x00000089, TRUE);
+ write_client_reg(VSYNIF, 0x00000001, TRUE);
+ mddi_wait(2);
+}
+
+static void toshiba_sec_cont_update_stop(struct msm_fb_data_type *mfd)
+{
+ if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+ return;
+
+ write_client_reg(PXL, 0x00000000, TRUE);
+ write_client_reg(VSYNIF, 0x00000000, TRUE);
+ write_client_reg(START, 0x00000000, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+ mddi_wait(3);
+ write_client_reg(SRST, 0x00000002, TRUE);
+ mddi_wait(3);
+ write_client_reg(SRST, 0x00000003, TRUE);
+}
+
+static void toshiba_sec_backlight_on(struct msm_fb_data_type *mfd)
+{
+ if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+ return;
+
+ write_client_reg(TIMER0CTRL, 0x00000060, TRUE);
+ write_client_reg(TIMER0LOAD, 0x00001388, TRUE);
+ write_client_reg(PWM0OFF, 0x00000001, TRUE);
+ write_client_reg(TIMER1CTRL, 0x00000060, TRUE);
+ write_client_reg(TIMER1LOAD, 0x00001388, TRUE);
+ write_client_reg(PWM1OFF, 0x00001387, TRUE);
+ write_client_reg(TIMER0CTRL, 0x000000E0, TRUE);
+ write_client_reg(TIMER1CTRL, 0x000000E0, TRUE);
+ write_client_reg(PWMCR, 0x00000003, TRUE);
+}
+
+static void toshiba_sec_sleep_in(struct msm_fb_data_type *mfd)
+{
+ if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+ return;
+
+ write_client_reg(VSYNIF, 0x00000000, TRUE);
+ write_client_reg(PORT_ENB, 0x00000002, TRUE);
+ write_client_reg(ASY_DATA, 0x80000007, TRUE);
+ write_client_reg(ASY_DATB, 0x00004016, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(2);
+ write_client_reg(ASY_DATA, 0x80000059, TRUE);
+ write_client_reg(ASY_DATB, 0x00000019, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(2);
+ write_client_reg(ASY_DATA, 0x80000059, TRUE);
+ write_client_reg(ASY_DATB, 0x0000000B, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(2);
+ write_client_reg(ASY_DATA, 0x80000059, TRUE);
+ write_client_reg(ASY_DATB, 0x00000002, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(4);
+ write_client_reg(ASY_DATA, 0x80000010, TRUE);
+ write_client_reg(ASY_DATB, 0x00000300, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(4);
+ write_client_reg(ASY_DATA, 0x80000059, TRUE);
+ write_client_reg(ASY_DATB, 0x00000000, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(2);
+ write_client_reg(ASY_DATA, 0x80000007, TRUE);
+ write_client_reg(ASY_DATB, 0x00004004, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(2);
+ write_client_reg(PORT, 0x00000000, TRUE);
+ write_client_reg(PXL, 0x00000000, TRUE);
+ write_client_reg(START, 0x00000000, TRUE);
+ write_client_reg(REGENB, 0x00000001, TRUE);
+ /* Sleep in sequence */
+ write_client_reg(ASY_DATA, 0x80000010, TRUE);
+ write_client_reg(ASY_DATB, 0x00000302, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+}
+
+static void toshiba_sec_sleep_out(struct msm_fb_data_type *mfd)
+{
+ if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+ return;
+
+ write_client_reg(VSYNIF, 0x00000000, TRUE);
+ write_client_reg(PORT_ENB, 0x00000002, TRUE);
+ write_client_reg(ASY_DATA, 0x80000010, TRUE);
+ write_client_reg(ASY_DATB, 0x00000300, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ /* Display ON sequence */
+ write_client_reg(ASY_DATA, 0x80000011, TRUE);
+ write_client_reg(ASY_DATB, 0x00000812, TRUE);
+ write_client_reg(ASY_DATC, 0x80000012, TRUE);
+ write_client_reg(ASY_DATD, 0x00000003, TRUE);
+ write_client_reg(ASY_DATE, 0x80000013, TRUE);
+ write_client_reg(ASY_DATF, 0x00000909, TRUE);
+ write_client_reg(ASY_DATG, 0x80000010, TRUE);
+ write_client_reg(ASY_DATH, 0x00000040, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+ mddi_wait(4);
+ write_client_reg(ASY_DATA, 0x80000010, TRUE);
+ write_client_reg(ASY_DATB, 0x00000340, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(6);
+ write_client_reg(ASY_DATA, 0x80000010, TRUE);
+ write_client_reg(ASY_DATB, 0x00003340, TRUE);
+ write_client_reg(ASY_DATC, 0x80000007, TRUE);
+ write_client_reg(ASY_DATD, 0x00004007, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000009, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000008, TRUE);
+ mddi_wait(1);
+ write_client_reg(ASY_DATA, 0x80000007, TRUE);
+ write_client_reg(ASY_DATB, 0x00004017, TRUE);
+ write_client_reg(ASY_DATC, 0x8000005B, TRUE);
+ write_client_reg(ASY_DATD, 0x00000000, TRUE);
+ write_client_reg(ASY_DATE, 0x80000059, TRUE);
+ write_client_reg(ASY_DATF, 0x00000011, TRUE);
+ write_client_reg(ASY_CMDSET, 0x0000000D, TRUE);
+ write_client_reg(ASY_CMDSET, 0x0000000C, TRUE);
+ mddi_wait(2);
+ write_client_reg(ASY_DATA, 0x80000059, TRUE);
+ write_client_reg(ASY_DATB, 0x00000019, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(2);
+ write_client_reg(ASY_DATA, 0x80000059, TRUE);
+ write_client_reg(ASY_DATB, 0x00000079, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(2);
+ write_client_reg(ASY_DATA, 0x80000059, TRUE);
+ write_client_reg(ASY_DATB, 0x000003FD, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+ write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+ mddi_wait(2);
+}
+
+static void mddi_toshiba_lcd_set_backlight(struct msm_fb_data_type *mfd)
+{
+ int32 level;
+ int ret = -EPERM;
+ int max = mfd->panel_info.bl_max;
+ int min = mfd->panel_info.bl_min;
+
+ if (mddi_toshiba_pdata && mddi_toshiba_pdata->pmic_backlight) {
+ ret = mddi_toshiba_pdata->pmic_backlight(mfd->bl_level);
+ if (!ret)
+ return;
+ }
+
+ if (ret && mddi_toshiba_pdata && mddi_toshiba_pdata->backlight_level) {
+ level = mddi_toshiba_pdata->backlight_level(mfd->bl_level,
+ max, min);
+
+ if (level < 0)
+ return;
+
+ if (TM_GET_PID(mfd->panel.id) == LCD_SHARP_2P4_VGA)
+ write_client_reg(TIMER0LOAD, 0x00001388, TRUE);
+ } else {
+ if (!max)
+ level = 0;
+ else
+ level = (mfd->bl_level * 4999) / max;
+ }
+
+ write_client_reg(PWM0OFF, level, TRUE);
+}
+
+static void mddi_toshiba_vsync_set_handler(msm_fb_vsync_handler_type handler, /* ISR to be executed */
+ void *arg)
+{
+ boolean error = FALSE;
+ unsigned long flags;
+
+ /* Disable interrupts */
+ spin_lock_irqsave(&mddi_host_spin_lock, flags);
+ /* INTLOCK(); */
+
+ if (mddi_toshiba_vsync_handler != NULL) {
+ error = TRUE;
+ } else {
+ /* Register the handler for this particular GROUP interrupt source */
+ mddi_toshiba_vsync_handler = handler;
+ mddi_toshiba_vsync_handler_arg = arg;
+ }
+
+ /* Restore interrupts */
+ spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+ /* MDDI_INTFREE(); */
+ if (error) {
+ MDDI_MSG_ERR("MDDI: Previous Vsync handler never called\n");
+ } else {
+ /* Enable the vsync wakeup */
+ mddi_queue_register_write(INTMSK, 0x0000, FALSE, 0);
+
+ mddi_toshiba_vsync_attempts = 1;
+ mddi_vsync_detect_enabled = TRUE;
+ }
+} /* mddi_toshiba_vsync_set_handler */
+
+static void mddi_toshiba_lcd_vsync_detected(boolean detected)
+{
+ /* static timetick_type start_time = 0; */
+ static struct timeval start_time;
+ static boolean first_time = TRUE;
+ /* uint32 mdp_cnt_val = 0; */
+ /* timetick_type elapsed_us; */
+ struct timeval now;
+ uint32 elapsed_us;
+ uint32 num_vsyncs;
+
+ if ((detected) || (mddi_toshiba_vsync_attempts > 5)) {
+ if ((detected) && (mddi_toshiba_monitor_refresh_value)) {
+ /* if (start_time != 0) */
+ if (!first_time) {
+ jiffies_to_timeval(jiffies, &now);
+ elapsed_us =
+ (now.tv_sec - start_time.tv_sec) * 1000000 +
+ now.tv_usec - start_time.tv_usec;
+ /*
+ * LCD is configured for a refresh every usecs,
+ * so to determine the number of vsyncs that
+ * have occurred since the last measurement
+ * add half that to the time difference and
+ * divide by the refresh rate.
+ */
+ num_vsyncs = (elapsed_us +
+ (mddi_toshiba_usecs_per_refresh >>
+ 1)) /
+ mddi_toshiba_usecs_per_refresh;
+ /*
+ * LCD is configured for * hsyncs (rows) per
+ * refresh cycle. Calculate new rows_per_second
+ * value based upon these new measurements.
+ * MDP can update with this new value.
+ */
+ mddi_toshiba_rows_per_second =
+ (mddi_toshiba_rows_per_refresh * 1000 *
+ num_vsyncs) / (elapsed_us / 1000);
+ }
+ /* start_time = timetick_get(); */
+ first_time = FALSE;
+ jiffies_to_timeval(jiffies, &start_time);
+ if (mddi_toshiba_report_refresh_measurements) {
+ (void)mddi_queue_register_read_int(VPOS,
+ &mddi_toshiba_curr_vpos);
+ /* mdp_cnt_val = MDP_LINE_COUNT; */
+ }
+ }
+ /* if detected = TRUE, client initiated wakeup was detected */
+ if (mddi_toshiba_vsync_handler != NULL) {
+ (*mddi_toshiba_vsync_handler)
+ (mddi_toshiba_vsync_handler_arg);
+ mddi_toshiba_vsync_handler = NULL;
+ }
+ mddi_vsync_detect_enabled = FALSE;
+ mddi_toshiba_vsync_attempts = 0;
+ /* need to disable the interrupt wakeup */
+ if (!mddi_queue_register_write_int(INTMSK, 0x0001))
+ MDDI_MSG_ERR("Vsync interrupt disable failed!\n");
+ if (!detected) {
+ /* give up after 5 failed attempts but show error */
+ MDDI_MSG_NOTICE("Vsync detection failed!\n");
+ } else if ((mddi_toshiba_monitor_refresh_value) &&
+ (mddi_toshiba_report_refresh_measurements)) {
+ MDDI_MSG_NOTICE(" Last Line Counter=%d!\n",
+ mddi_toshiba_curr_vpos);
+ /* MDDI_MSG_NOTICE(" MDP Line Counter=%d!\n",mdp_cnt_val); */
+ MDDI_MSG_NOTICE(" Lines Per Second=%d!\n",
+ mddi_toshiba_rows_per_second);
+ }
+ /* clear the interrupt */
+ if (!mddi_queue_register_write_int(INTFLG, 0x0001))
+ MDDI_MSG_ERR("Vsync interrupt clear failed!\n");
+ } else {
+ /* if detected = FALSE, we woke up from hibernation, but did not
+ * detect client initiated wakeup.
+ */
+ mddi_toshiba_vsync_attempts++;
+ }
+}
+
+static void mddi_toshiba_prim_init(struct msm_fb_data_type *mfd)
+{
+
+ switch (toshiba_state) {
+ case TOSHIBA_STATE_PRIM_SEC_READY:
+ break;
+ case TOSHIBA_STATE_OFF:
+ toshiba_state = TOSHIBA_STATE_PRIM_SEC_STANDBY;
+ toshiba_common_initial_setup(mfd);
+ break;
+ case TOSHIBA_STATE_PRIM_SEC_STANDBY:
+ toshiba_common_initial_setup(mfd);
+ break;
+ case TOSHIBA_STATE_SEC_NORMAL_MODE:
+ toshiba_sec_cont_update_stop(mfd);
+ toshiba_sec_sleep_in(mfd);
+ toshiba_sec_sleep_out(mfd);
+ toshiba_sec_lcd_off(mfd);
+ toshiba_common_initial_setup(mfd);
+ break;
+ default:
+ MDDI_MSG_ERR("mddi_toshiba_prim_init from state %d\n",
+ toshiba_state);
+ }
+
+ toshiba_prim_start(mfd);
+ if (TM_GET_PID(mfd->panel.id) == LCD_SHARP_2P4_VGA)
+ gordon_disp_init();
+ mddi_host_write_pix_attr_reg(0x00C3);
+}
+
+static void mddi_toshiba_sec_init(struct msm_fb_data_type *mfd)
+{
+
+ switch (toshiba_state) {
+ case TOSHIBA_STATE_PRIM_SEC_READY:
+ break;
+ case TOSHIBA_STATE_PRIM_SEC_STANDBY:
+ toshiba_common_initial_setup(mfd);
+ break;
+ case TOSHIBA_STATE_PRIM_NORMAL_MODE:
+ toshiba_prim_lcd_off(mfd);
+ toshiba_common_initial_setup(mfd);
+ break;
+ default:
+ MDDI_MSG_ERR("mddi_toshiba_sec_init from state %d\n",
+ toshiba_state);
+ }
+
+ toshiba_sec_start(mfd);
+ toshiba_sec_backlight_on(mfd);
+ toshiba_sec_cont_update_start(mfd);
+ mddi_host_write_pix_attr_reg(0x0400);
+}
+
+static void mddi_toshiba_lcd_powerdown(struct msm_fb_data_type *mfd)
+{
+ switch (toshiba_state) {
+ case TOSHIBA_STATE_PRIM_SEC_READY:
+ mddi_toshiba_prim_init(mfd);
+ mddi_toshiba_lcd_powerdown(mfd);
+ return;
+ case TOSHIBA_STATE_PRIM_SEC_STANDBY:
+ break;
+ case TOSHIBA_STATE_PRIM_NORMAL_MODE:
+ toshiba_prim_lcd_off(mfd);
+ break;
+ case TOSHIBA_STATE_SEC_NORMAL_MODE:
+ toshiba_sec_cont_update_stop(mfd);
+ toshiba_sec_sleep_in(mfd);
+ toshiba_sec_sleep_out(mfd);
+ toshiba_sec_lcd_off(mfd);
+ break;
+ default:
+ MDDI_MSG_ERR("mddi_toshiba_lcd_powerdown from state %d\n",
+ toshiba_state);
+ }
+}
+
+static int mddi_sharpgordon_firsttime = 1;
+
+static int mddi_toshiba_lcd_on(struct platform_device *pdev)
+{
+ struct msm_fb_data_type *mfd;
+ mfd = platform_get_drvdata(pdev);
+ if (!mfd)
+ return -ENODEV;
+ if (mfd->key != MFD_KEY)
+ return -EINVAL;
+
+ if (TM_GET_DID(mfd->panel.id) == TOSHIBA_VGA_PRIM)
+ mddi_toshiba_prim_init(mfd);
+ else
+ mddi_toshiba_sec_init(mfd);
+ if (TM_GET_PID(mfd->panel.id) == LCD_SHARP_2P4_VGA) {
+ if (mddi_sharpgordon_firsttime) {
+ mddi_sharpgordon_firsttime = 0;
+ write_client_reg(REGENB, 0x00000001, TRUE);
+ }
+ }
+ return 0;
+}
+
+static int mddi_toshiba_lcd_off(struct platform_device *pdev)
+{
+ mddi_toshiba_lcd_powerdown(platform_get_drvdata(pdev));
+ return 0;
+}
+
+static int __init mddi_toshiba_lcd_probe(struct platform_device *pdev)
+{
+ if (pdev->id == 0) {
+ mddi_toshiba_pdata = pdev->dev.platform_data;
+ return 0;
+ }
+
+ msm_fb_add_device(pdev);
+
+ return 0;
+}
+
+static struct platform_driver this_driver = {
+ .probe = mddi_toshiba_lcd_probe,
+ .driver = {
+ .name = "mddi_toshiba",
+ },
+};
+
+static struct msm_fb_panel_data toshiba_panel_data = {
+ .on = mddi_toshiba_lcd_on,
+ .off = mddi_toshiba_lcd_off,
+};
+
+static int ch_used[3];
+
+int mddi_toshiba_device_register(struct msm_panel_info *pinfo,
+ u32 channel, u32 panel)
+{
+ struct platform_device *pdev = NULL;
+ int ret;
+
+ if ((channel >= 3) || ch_used[channel])
+ return -ENODEV;
+
+ if ((channel != TOSHIBA_VGA_PRIM) &&
+ mddi_toshiba_pdata && mddi_toshiba_pdata->panel_num)
+ if (mddi_toshiba_pdata->panel_num() < 2)
+ return -ENODEV;
+
+ ch_used[channel] = TRUE;
+
+ pdev = platform_device_alloc("mddi_toshiba", (panel << 8)|channel);
+ if (!pdev)
+ return -ENOMEM;
+
+ if (channel == TOSHIBA_VGA_PRIM) {
+ toshiba_panel_data.set_backlight =
+ mddi_toshiba_lcd_set_backlight;
+
+ if (pinfo->lcd.vsync_enable) {
+ toshiba_panel_data.set_vsync_notifier =
+ mddi_toshiba_vsync_set_handler;
+ mddi_lcd.vsync_detected =
+ mddi_toshiba_lcd_vsync_detected;
+ }
+ } else {
+ toshiba_panel_data.set_backlight = NULL;
+ toshiba_panel_data.set_vsync_notifier = NULL;
+ }
+
+ toshiba_panel_data.panel_info = *pinfo;
+
+ ret = platform_device_add_data(pdev, &toshiba_panel_data,
+ sizeof(toshiba_panel_data));
+ if (ret) {
+ printk(KERN_ERR
+ "%s: platform_device_add_data failed!\n", __func__);
+ goto err_device_put;
+ }
+
+ ret = platform_device_add(pdev);
+ if (ret) {
+ printk(KERN_ERR
+ "%s: platform_device_register failed!\n", __func__);
+ goto err_device_put;
+ }
+
+ return 0;
+
+err_device_put:
+ platform_device_put(pdev);
+ return ret;
+}
+
+static int __init mddi_toshiba_lcd_init(void)
+{
+ return platform_driver_register(&this_driver);
+}
+
+module_init(mddi_toshiba_lcd_init);
diff --git a/drivers/staging/msm/mddi_toshiba.h b/drivers/staging/msm/mddi_toshiba.h
new file mode 100644
index 0000000..2d22b9a
--- /dev/null
+++ b/drivers/staging/msm/mddi_toshiba.h
@@ -0,0 +1,52 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Code Aurora nor
+ * the names of its contributors may be used to endorse or promote
+ * products derived from this software without specific prior written
+ * permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MDDI_TOSHIBA_H
+#define MDDI_TOSHIBA_H
+
+#define TOSHIBA_VGA_PRIM 1
+#define TOSHIBA_VGA_SECD 2
+
+#define LCD_TOSHIBA_2P4_VGA 0
+#define LCD_TOSHIBA_2P4_WVGA 1
+#define LCD_TOSHIBA_2P4_WVGA_PT 2
+#define LCD_SHARP_2P4_VGA 3
+
+#define GPIO_BLOCK_BASE 0x150000
+#define SYSTEM_BLOCK2_BASE 0x170000
+
+#define GPIODIR (GPIO_BLOCK_BASE|0x04)
+#define GPIOSEL (SYSTEM_BLOCK2_BASE|0x00)
+#define GPIOPC (GPIO_BLOCK_BASE|0x28)
+#define GPIODATA (GPIO_BLOCK_BASE|0x00)
+
+#define write_client_reg(__X, __Y, __Z) {\
+ mddi_queue_register_write(__X, __Y, TRUE, 0);\
+}
+
+#endif /* MDDI_TOSHIBA_H */
diff --git a/drivers/staging/msm/mddi_toshiba_vga.c b/drivers/staging/msm/mddi_toshiba_vga.c
new file mode 100644
index 0000000..7e61d3a
--- /dev/null
+++ b/drivers/staging/msm/mddi_toshiba_vga.c
@@ -0,0 +1,136 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+#include "mddi_toshiba.h"
+
+static uint32 read_client_reg(uint32 addr)
+{
+ uint32 val;
+ mddi_queue_register_read(addr, &val, TRUE, 0);
+ return val;
+}
+
+static uint32 toshiba_lcd_gpio_read(void)
+{
+ uint32 val;
+
+ write_client_reg(GPIODIR, 0x0000000C, TRUE);
+ write_client_reg(GPIOSEL, 0x00000000, TRUE);
+ write_client_reg(GPIOSEL, 0x00000000, TRUE);
+ write_client_reg(GPIOPC, 0x03CF00C0, TRUE);
+ val = read_client_reg(GPIODATA) & 0x2C0;
+
+ return val;
+}
+
+static u32 mddi_toshiba_panel_detect(void)
+{
+ mddi_host_type host_idx = MDDI_HOST_PRIM;
+ uint32 lcd_gpio;
+ u32 mddi_toshiba_lcd = LCD_TOSHIBA_2P4_VGA;
+
+ /* Toshiba display requires larger drive_lo value */
+ mddi_host_reg_out(DRIVE_LO, 0x0050);
+
+ lcd_gpio = toshiba_lcd_gpio_read();
+ switch (lcd_gpio) {
+ case 0x0080:
+ mddi_toshiba_lcd = LCD_SHARP_2P4_VGA;
+ break;
+
+ case 0x00C0:
+ default:
+ mddi_toshiba_lcd = LCD_TOSHIBA_2P4_VGA;
+ break;
+ }
+
+ return mddi_toshiba_lcd;
+}
+
+static int __init mddi_toshiba_vga_init(void)
+{
+ int ret;
+ struct msm_panel_info pinfo;
+ u32 panel;
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+ u32 id;
+
+ ret = msm_fb_detect_client("mddi_toshiba_vga");
+ if (ret == -ENODEV)
+ return 0;
+
+ if (ret) {
+ id = mddi_get_client_id();
+ if ((id >> 16) != 0xD263)
+ return 0;
+ }
+#endif
+
+ panel = mddi_toshiba_panel_detect();
+
+ pinfo.xres = 480;
+ pinfo.yres = 640;
+ pinfo.type = MDDI_PANEL;
+ pinfo.pdest = DISPLAY_1;
+ pinfo.mddi.vdopkt = MDDI_DEFAULT_PRIM_PIX_ATTR;
+ pinfo.wait_cycle = 0;
+ pinfo.bpp = 18;
+ pinfo.lcd.vsync_enable = TRUE;
+ pinfo.lcd.refx100 = 6118;
+ pinfo.lcd.v_back_porch = 6;
+ pinfo.lcd.v_front_porch = 0;
+ pinfo.lcd.v_pulse_width = 0;
+ pinfo.lcd.hw_vsync_mode = FALSE;
+ pinfo.lcd.vsync_notifier_period = (1 * HZ);
+ pinfo.bl_max = 99;
+ pinfo.bl_min = 1;
+ pinfo.clk_rate = 122880000;
+ pinfo.clk_min = 120000000;
+ pinfo.clk_max = 200000000;
+ pinfo.fb_num = 2;
+
+ ret = mddi_toshiba_device_register(&pinfo, TOSHIBA_VGA_PRIM, panel);
+ if (ret) {
+ printk(KERN_ERR "%s: failed to register device!\n", __func__);
+ return ret;
+ }
+
+ pinfo.xres = 176;
+ pinfo.yres = 220;
+ pinfo.type = MDDI_PANEL;
+ pinfo.pdest = DISPLAY_2;
+ pinfo.mddi.vdopkt = 0x400;
+ pinfo.wait_cycle = 0;
+ pinfo.bpp = 18;
+ pinfo.clk_rate = 122880000;
+ pinfo.clk_min = 120000000;
+ pinfo.clk_max = 200000000;
+ pinfo.fb_num = 2;
+
+ ret = mddi_toshiba_device_register(&pinfo, TOSHIBA_VGA_SECD, panel);
+ if (ret)
+ printk(KERN_WARNING
+ "%s: failed to register device!\n", __func__);
+
+ return ret;
+}
+
+module_init(mddi_toshiba_vga_init);
diff --git a/drivers/staging/msm/mddi_toshiba_wvga.c b/drivers/staging/msm/mddi_toshiba_wvga.c
new file mode 100644
index 0000000..557b0f0
--- /dev/null
+++ b/drivers/staging/msm/mddi_toshiba_wvga.c
@@ -0,0 +1,63 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddi_toshiba.h"
+
+static int __init mddi_toshiba_wvga_init(void)
+{
+ int ret;
+ struct msm_panel_info pinfo;
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+ if (msm_fb_detect_client("mddi_toshiba_wvga"))
+ return 0;
+#endif
+
+ pinfo.xres = 800;
+ pinfo.yres = 480;
+ pinfo.pdest = DISPLAY_2;
+ pinfo.type = MDDI_PANEL;
+ pinfo.mddi.vdopkt = MDDI_DEFAULT_PRIM_PIX_ATTR;
+ pinfo.wait_cycle = 0;
+ pinfo.bpp = 18;
+ pinfo.lcd.vsync_enable = TRUE;
+ pinfo.lcd.refx100 = 6118;
+ pinfo.lcd.v_back_porch = 6;
+ pinfo.lcd.v_front_porch = 0;
+ pinfo.lcd.v_pulse_width = 0;
+ pinfo.lcd.hw_vsync_mode = FALSE;
+ pinfo.lcd.vsync_notifier_period = (1 * HZ);
+ pinfo.bl_max = 4;
+ pinfo.bl_min = 1;
+ pinfo.clk_rate = 192000000;
+ pinfo.clk_min = 190000000;
+ pinfo.clk_max = 200000000;
+ pinfo.fb_num = 2;
+
+ ret = mddi_toshiba_device_register(&pinfo, TOSHIBA_VGA_PRIM,
+ LCD_TOSHIBA_2P4_WVGA);
+ if (ret) {
+ printk(KERN_ERR "%s: failed to register device!\n", __func__);
+ return ret;
+ }
+
+ return ret;
+}
+
+module_init(mddi_toshiba_wvga_init);
diff --git a/drivers/staging/msm/mddi_toshiba_wvga_pt.c b/drivers/staging/msm/mddi_toshiba_wvga_pt.c
new file mode 100644
index 0000000..fc7d4e0
--- /dev/null
+++ b/drivers/staging/msm/mddi_toshiba_wvga_pt.c
@@ -0,0 +1,64 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+#include "mddi_toshiba.h"
+
+static int __init mddi_toshiba_wvga_pt_init(void)
+{
+ int ret;
+ struct msm_panel_info pinfo;
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+ uint id;
+
+ ret = msm_fb_detect_client("mddi_toshiba_wvga_pt");
+ if (ret == -ENODEV)
+ return 0;
+
+ if (ret) {
+ id = mddi_get_client_id();
+ if (id != 0xd2638722)
+ return 0;
+ }
+#endif
+
+ pinfo.xres = 480;
+ pinfo.yres = 800;
+ pinfo.type = MDDI_PANEL;
+ pinfo.pdest = DISPLAY_1;
+ pinfo.mddi.vdopkt = MDDI_DEFAULT_PRIM_PIX_ATTR;
+ pinfo.wait_cycle = 0;
+ pinfo.bpp = 18;
+ pinfo.lcd.vsync_enable = FALSE;
+ pinfo.bl_max = 15;
+ pinfo.bl_min = 1;
+ pinfo.clk_rate = 192000000;
+ pinfo.clk_min = 190000000;
+ pinfo.clk_max = 200000000;
+ pinfo.fb_num = 2;
+
+ ret = mddi_toshiba_device_register(&pinfo, TOSHIBA_VGA_PRIM,
+ LCD_TOSHIBA_2P4_WVGA_PT);
+ if (ret)
+ printk(KERN_ERR "%s: failed to register device!\n", __func__);
+
+ return ret;
+}
+
+module_init(mddi_toshiba_wvga_pt_init);
diff --git a/drivers/staging/msm/mddihost.c b/drivers/staging/msm/mddihost.c
new file mode 100644
index 0000000..c6c1ee4
--- /dev/null
+++ b/drivers/staging/msm/mddihost.c
@@ -0,0 +1,377 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+
+#include <linux/clk.h>
+#include <mach/clk.h>
+
+struct semaphore mddi_host_mutex;
+
+struct clk *mddi_io_clk;
+static boolean mddi_host_powered = FALSE;
+static boolean mddi_host_initialized = FALSE;
+extern uint32 *mddi_reg_read_value_ptr;
+
+mddi_lcd_func_type mddi_lcd;
+
+extern mddi_client_capability_type mddi_client_capability_pkt;
+
+#ifdef FEATURE_MDDI_HITACHI
+extern void mddi_hitachi_window_adjust(uint16 x1,
+ uint16 x2, uint16 y1, uint16 y2);
+#endif
+
+extern void mddi_toshiba_lcd_init(void);
+
+#ifdef FEATURE_MDDI_S6D0142
+extern void mddi_s6d0142_lcd_init(void);
+extern void mddi_s6d0142_window_adjust(uint16 x1,
+ uint16 x2,
+ uint16 y1,
+ uint16 y2,
+ mddi_llist_done_cb_type done_cb);
+#endif
+
+void mddi_init(void)
+{
+ if (mddi_host_initialized)
+ return;
+
+ mddi_host_initialized = TRUE;
+
+ init_MUTEX(&mddi_host_mutex);
+
+ if (!mddi_host_powered) {
+ down(&mddi_host_mutex);
+ mddi_host_init(MDDI_HOST_PRIM);
+ mddi_host_powered = TRUE;
+ up(&mddi_host_mutex);
+ mdelay(10);
+ }
+}
+
+int mddi_host_register_read(uint32 reg_addr,
+ uint32 *reg_value_ptr, boolean wait, mddi_host_type host) {
+ mddi_linked_list_type *curr_llist_ptr;
+ mddi_register_access_packet_type *regacc_pkt_ptr;
+ uint16 curr_llist_idx;
+ int ret = 0;
+
+ if (in_interrupt())
+ MDDI_MSG_CRIT("Called from ISR context\n");
+
+ if (!mddi_host_powered) {
+ MDDI_MSG_ERR("MDDI powered down!\n");
+ mddi_init();
+ }
+
+ down(&mddi_host_mutex);
+
+ mddi_reg_read_value_ptr = reg_value_ptr;
+ curr_llist_idx = mddi_get_reg_read_llist_item(host, TRUE);
+ if (curr_llist_idx == UNASSIGNED_INDEX) {
+ up(&mddi_host_mutex);
+
+ /* need to change this to some sort of wait */
+ MDDI_MSG_ERR("Attempting to queue up more than 1 reg read\n");
+ return -EINVAL;
+ }
+
+ curr_llist_ptr = &llist_extern[host][curr_llist_idx];
+ curr_llist_ptr->link_controller_flags = 0x11;
+ curr_llist_ptr->packet_header_count = 14;
+ curr_llist_ptr->packet_data_count = 0;
+
+ curr_llist_ptr->next_packet_pointer = NULL;
+ curr_llist_ptr->packet_data_pointer = NULL;
+ curr_llist_ptr->reserved = 0;
+
+ regacc_pkt_ptr = &curr_llist_ptr->packet_header.register_pkt;
+
+ regacc_pkt_ptr->packet_length = curr_llist_ptr->packet_header_count;
+ regacc_pkt_ptr->packet_type = 146; /* register access packet */
+ regacc_pkt_ptr->bClient_ID = 0;
+ regacc_pkt_ptr->read_write_info = 0x8001;
+ regacc_pkt_ptr->register_address = reg_addr;
+
+ /* now adjust pointers */
+ mddi_queue_forward_packets(curr_llist_idx, curr_llist_idx, wait,
+ NULL, host);
+ /* need to check if we can write the pointer or not */
+
+ up(&mddi_host_mutex);
+
+ if (wait) {
+ int wait_ret;
+
+ mddi_linked_list_notify_type *llist_notify_ptr;
+ llist_notify_ptr = &llist_extern_notify[host][curr_llist_idx];
+ wait_ret = wait_for_completion_timeout(
+ &(llist_notify_ptr->done_comp), 5 * HZ);
+
+ if (wait_ret <= 0)
+ ret = -EBUSY;
+
+ if (wait_ret < 0)
+ printk(KERN_ERR "%s: failed to wait for completion!\n",
+ __func__);
+ else if (!wait_ret)
+ printk(KERN_ERR "%s: Timed out waiting!\n", __func__);
+ }
+
+ MDDI_MSG_DEBUG("Reg Read value=0x%x\n", *reg_value_ptr);
+
+ return ret;
+} /* mddi_host_register_read */
+
+int mddi_host_register_write(uint32 reg_addr,
+ uint32 reg_val, enum mddi_data_packet_size_type packet_size,
+ boolean wait, mddi_llist_done_cb_type done_cb, mddi_host_type host) {
+ mddi_linked_list_type *curr_llist_ptr;
+ mddi_linked_list_type *curr_llist_dma_ptr;
+ mddi_register_access_packet_type *regacc_pkt_ptr;
+ uint16 curr_llist_idx;
+ int ret = 0;
+
+ if (in_interrupt())
+ MDDI_MSG_CRIT("Called from ISR context\n");
+
+ if (!mddi_host_powered) {
+ MDDI_MSG_ERR("MDDI powered down!\n");
+ mddi_init();
+ }
+
+ down(&mddi_host_mutex);
+
+ curr_llist_idx = mddi_get_next_free_llist_item(host, TRUE);
+ curr_llist_ptr = &llist_extern[host][curr_llist_idx];
+ curr_llist_dma_ptr = &llist_dma_extern[host][curr_llist_idx];
+
+ curr_llist_ptr->link_controller_flags = 1;
+ curr_llist_ptr->packet_header_count = 14;
+ curr_llist_ptr->packet_data_count = 4;
+
+ curr_llist_ptr->next_packet_pointer = NULL;
+ curr_llist_ptr->reserved = 0;
+
+ regacc_pkt_ptr = &curr_llist_ptr->packet_header.register_pkt;
+
+ regacc_pkt_ptr->packet_length = curr_llist_ptr->packet_header_count +
+ (uint16)packet_size;
+ regacc_pkt_ptr->packet_type = 146; /* register access packet */
+ regacc_pkt_ptr->bClient_ID = 0;
+ regacc_pkt_ptr->read_write_info = 0x0001;
+ regacc_pkt_ptr->register_address = reg_addr;
+ regacc_pkt_ptr->register_data_list = reg_val;
+
+ MDDI_MSG_DEBUG("Reg Access write reg=0x%x, value=0x%x\n",
+ regacc_pkt_ptr->register_address,
+ regacc_pkt_ptr->register_data_list);
+
+ regacc_pkt_ptr = &curr_llist_dma_ptr->packet_header.register_pkt;
+ curr_llist_ptr->packet_data_pointer =
+ (void *)(®acc_pkt_ptr->register_data_list);
+
+ /* now adjust pointers */
+ mddi_queue_forward_packets(curr_llist_idx, curr_llist_idx, wait,
+ done_cb, host);
+
+ up(&mddi_host_mutex);
+
+ if (wait) {
+ int wait_ret;
+
+ mddi_linked_list_notify_type *llist_notify_ptr;
+ llist_notify_ptr = &llist_extern_notify[host][curr_llist_idx];
+ wait_ret = wait_for_completion_timeout(
+ &(llist_notify_ptr->done_comp), 5 * HZ);
+
+ if (wait_ret <= 0)
+ ret = -EBUSY;
+
+ if (wait_ret < 0)
+ printk(KERN_ERR "%s: failed to wait for completion!\n",
+ __func__);
+ else if (!wait_ret)
+ printk(KERN_ERR "%s: Timed out waiting!\n", __func__);
+ }
+
+ return ret;
+} /* mddi_host_register_write */
+
+boolean mddi_host_register_read_int
+ (uint32 reg_addr, uint32 *reg_value_ptr, mddi_host_type host) {
+ mddi_linked_list_type *curr_llist_ptr;
+ mddi_register_access_packet_type *regacc_pkt_ptr;
+ uint16 curr_llist_idx;
+
+ if (!in_interrupt())
+ MDDI_MSG_CRIT("Called from TASK context\n");
+
+ if (!mddi_host_powered) {
+ MDDI_MSG_ERR("MDDI powered down!\n");
+ return FALSE;
+ }
+
+ if (down_trylock(&mddi_host_mutex) != 0)
+ return FALSE;
+
+ mddi_reg_read_value_ptr = reg_value_ptr;
+ curr_llist_idx = mddi_get_reg_read_llist_item(host, FALSE);
+ if (curr_llist_idx == UNASSIGNED_INDEX) {
+ up(&mddi_host_mutex);
+ return FALSE;
+ }
+
+ curr_llist_ptr = &llist_extern[host][curr_llist_idx];
+ curr_llist_ptr->link_controller_flags = 0x11;
+ curr_llist_ptr->packet_header_count = 14;
+ curr_llist_ptr->packet_data_count = 0;
+
+ curr_llist_ptr->next_packet_pointer = NULL;
+ curr_llist_ptr->packet_data_pointer = NULL;
+ curr_llist_ptr->reserved = 0;
+
+ regacc_pkt_ptr = &curr_llist_ptr->packet_header.register_pkt;
+
+ regacc_pkt_ptr->packet_length = curr_llist_ptr->packet_header_count;
+ regacc_pkt_ptr->packet_type = 146; /* register access packet */
+ regacc_pkt_ptr->bClient_ID = 0;
+ regacc_pkt_ptr->read_write_info = 0x8001;
+ regacc_pkt_ptr->register_address = reg_addr;
+
+ /* now adjust pointers */
+ mddi_queue_forward_packets(curr_llist_idx, curr_llist_idx, FALSE,
+ NULL, host);
+ /* need to check if we can write the pointer or not */
+
+ up(&mddi_host_mutex);
+
+ return TRUE;
+
+} /* mddi_host_register_read */
+
+boolean mddi_host_register_write_int
+ (uint32 reg_addr,
+ uint32 reg_val, mddi_llist_done_cb_type done_cb, mddi_host_type host) {
+ mddi_linked_list_type *curr_llist_ptr;
+ mddi_linked_list_type *curr_llist_dma_ptr;
+ mddi_register_access_packet_type *regacc_pkt_ptr;
+ uint16 curr_llist_idx;
+
+ if (!in_interrupt())
+ MDDI_MSG_CRIT("Called from TASK context\n");
+
+ if (!mddi_host_powered) {
+ MDDI_MSG_ERR("MDDI powered down!\n");
+ return FALSE;
+ }
+
+ if (down_trylock(&mddi_host_mutex) != 0)
+ return FALSE;
+
+ curr_llist_idx = mddi_get_next_free_llist_item(host, FALSE);
+ if (curr_llist_idx == UNASSIGNED_INDEX) {
+ up(&mddi_host_mutex);
+ return FALSE;
+ }
+
+ curr_llist_ptr = &llist_extern[host][curr_llist_idx];
+ curr_llist_dma_ptr = &llist_dma_extern[host][curr_llist_idx];
+
+ curr_llist_ptr->link_controller_flags = 1;
+ curr_llist_ptr->packet_header_count = 14;
+ curr_llist_ptr->packet_data_count = 4;
+
+ curr_llist_ptr->next_packet_pointer = NULL;
+ curr_llist_ptr->reserved = 0;
+
+ regacc_pkt_ptr = &curr_llist_ptr->packet_header.register_pkt;
+
+ regacc_pkt_ptr->packet_length = curr_llist_ptr->packet_header_count + 4;
+ regacc_pkt_ptr->packet_type = 146; /* register access packet */
+ regacc_pkt_ptr->bClient_ID = 0;
+ regacc_pkt_ptr->read_write_info = 0x0001;
+ regacc_pkt_ptr->register_address = reg_addr;
+ regacc_pkt_ptr->register_data_list = reg_val;
+
+ regacc_pkt_ptr = &curr_llist_dma_ptr->packet_header.register_pkt;
+ curr_llist_ptr->packet_data_pointer =
+ (void *)(&(regacc_pkt_ptr->register_data_list));
+
+ /* now adjust pointers */
+ mddi_queue_forward_packets(curr_llist_idx, curr_llist_idx, FALSE,
+ done_cb, host);
+ up(&mddi_host_mutex);
+
+ return TRUE;
+
+} /* mddi_host_register_write */
+
+void mddi_wait(uint16 time_ms)
+{
+ mdelay(time_ms);
+}
+
+void mddi_client_lcd_vsync_detected(boolean detected)
+{
+ if (mddi_lcd.vsync_detected)
+ (*mddi_lcd.vsync_detected) (detected);
+}
+
+/* extended version of function includes done callback */
+void mddi_window_adjust_ext(struct msm_fb_data_type *mfd,
+ uint16 x1,
+ uint16 x2,
+ uint16 y1,
+ uint16 y2, mddi_llist_done_cb_type done_cb)
+{
+#ifdef FEATURE_MDDI_HITACHI
+ if (mfd->panel.id == HITACHI)
+ mddi_hitachi_window_adjust(x1, x2, y1, y2);
+#elif defined(FEATURE_MDDI_S6D0142)
+ if (mfd->panel.id == MDDI_LCD_S6D0142)
+ mddi_s6d0142_window_adjust(x1, x2, y1, y2, done_cb);
+#else
+ /* Do nothing then... except avoid lint/compiler warnings */
+ (void)x1;
+ (void)x2;
+ (void)y1;
+ (void)y2;
+ (void)done_cb;
+#endif
+}
+
+void mddi_window_adjust(struct msm_fb_data_type *mfd,
+ uint16 x1, uint16 x2, uint16 y1, uint16 y2)
+{
+ mddi_window_adjust_ext(mfd, x1, x2, y1, y2, NULL);
+}
diff --git a/drivers/staging/msm/mddihost.h b/drivers/staging/msm/mddihost.h
new file mode 100644
index 0000000..20b8178
--- /dev/null
+++ b/drivers/staging/msm/mddihost.h
@@ -0,0 +1,225 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Code Aurora nor
+ * the names of its contributors may be used to endorse or promote
+ * products derived from this software without specific prior written
+ * permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MDDIHOST_H
+#define MDDIHOST_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include "linux/proc_fs.h"
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+
+#include "msm_fb_panel.h"
+
+#undef FEATURE_MDDI_MC4
+#undef FEATURE_MDDI_S6D0142
+#undef FEATURE_MDDI_HITACHI
+#define FEATURE_MDDI_SHARP
+#define FEATURE_MDDI_TOSHIBA
+#undef FEATURE_MDDI_E751
+#define FEATURE_MDDI_CORONA
+#define FEATURE_MDDI_PRISM
+
+#define T_MSM7500
+
+typedef enum {
+ format_16bpp,
+ format_18bpp,
+ format_24bpp
+} mddi_video_format;
+
+typedef enum {
+ MDDI_LCD_NONE = 0,
+ MDDI_LCD_MC4,
+ MDDI_LCD_S6D0142,
+ MDDI_LCD_SHARP,
+ MDDI_LCD_E751,
+ MDDI_LCD_CORONA,
+ MDDI_LCD_HITACHI,
+ MDDI_LCD_TOSHIBA,
+ MDDI_LCD_PRISM,
+ MDDI_LCD_TP2,
+ MDDI_NUM_LCD_TYPES,
+ MDDI_LCD_DEFAULT = MDDI_LCD_TOSHIBA
+} mddi_lcd_type;
+
+typedef enum {
+ MDDI_HOST_PRIM = 0,
+ MDDI_HOST_EXT,
+ MDDI_NUM_HOST_CORES
+} mddi_host_type;
+
+typedef enum {
+ MDDI_DRIVER_RESET, /* host core registers have not been written. */
+ MDDI_DRIVER_DISABLED, /* registers written, interrupts disabled. */
+ MDDI_DRIVER_ENABLED /* registers written, interrupts enabled. */
+} mddi_host_driver_state_type;
+
+typedef enum {
+ MDDI_GPIO_INT_0 = 0,
+ MDDI_GPIO_INT_1,
+ MDDI_GPIO_INT_2,
+ MDDI_GPIO_INT_3,
+ MDDI_GPIO_INT_4,
+ MDDI_GPIO_INT_5,
+ MDDI_GPIO_INT_6,
+ MDDI_GPIO_INT_7,
+ MDDI_GPIO_INT_8,
+ MDDI_GPIO_INT_9,
+ MDDI_GPIO_INT_10,
+ MDDI_GPIO_INT_11,
+ MDDI_GPIO_INT_12,
+ MDDI_GPIO_INT_13,
+ MDDI_GPIO_INT_14,
+ MDDI_GPIO_INT_15,
+ MDDI_GPIO_NUM_INTS
+} mddi_gpio_int_type;
+
+enum mddi_data_packet_size_type {
+ MDDI_DATA_PACKET_4_BYTES = 4,
+ MDDI_DATA_PACKET_8_BYTES = 8,
+ MDDI_DATA_PACKET_12_BYTES = 12,
+ MDDI_DATA_PACKET_16_BYTES = 16,
+ MDDI_DATA_PACKET_24_BYTES = 24
+};
+
+typedef struct {
+ uint32 addr;
+ uint32 value;
+} mddi_reg_write_type;
+
+boolean mddi_vsync_set_handler(msm_fb_vsync_handler_type handler, void *arg);
+
+typedef void (*mddi_llist_done_cb_type) (void);
+
+typedef void (*mddi_rev_handler_type) (void *);
+
+boolean mddi_set_rev_handler(mddi_rev_handler_type handler, uint16 pkt_type);
+
+#define MDDI_DEFAULT_PRIM_PIX_ATTR 0xC3
+#define MDDI_DEFAULT_SECD_PIX_ATTR 0xC0
+
+typedef int gpio_int_polarity_type;
+typedef int gpio_int_handler_type;
+
+typedef struct {
+ void (*vsync_detected) (boolean);
+} mddi_lcd_func_type;
+
+extern mddi_lcd_func_type mddi_lcd;
+void mddi_init(void);
+
+void mddi_powerdown(void);
+
+void mddi_host_start_ext_display(void);
+void mddi_host_stop_ext_display(void);
+
+extern spinlock_t mddi_host_spin_lock;
+#ifdef T_MSM7500
+void mddi_reset(void);
+#ifdef FEATURE_DUAL_PROC_MODEM_DISPLAY
+void mddi_host_switch_proc_control(boolean on);
+#endif
+#endif
+void mddi_host_exit_power_collapse(void);
+
+void mddi_queue_splash_screen
+ (void *buf_ptr,
+ boolean clear_area,
+ int16 src_width,
+ int16 src_starting_row,
+ int16 src_starting_column,
+ int16 num_of_rows,
+ int16 num_of_columns, int16 dst_starting_row, int16 dst_starting_column);
+
+void mddi_queue_image
+ (void *buf_ptr,
+ uint8 stereo_video,
+ boolean clear_area,
+ int16 src_width,
+ int16 src_starting_row,
+ int16 src_starting_column,
+ int16 num_of_rows,
+ int16 num_of_columns, int16 dst_starting_row, int16 dst_starting_column);
+
+int mddi_host_register_read
+ (uint32 reg_addr,
+ uint32 *reg_value_ptr, boolean wait, mddi_host_type host_idx);
+int mddi_host_register_write
+ (uint32 reg_addr, uint32 reg_val,
+ enum mddi_data_packet_size_type packet_size,
+ boolean wait, mddi_llist_done_cb_type done_cb, mddi_host_type host);
+boolean mddi_host_register_write_int
+ (uint32 reg_addr,
+ uint32 reg_val, mddi_llist_done_cb_type done_cb, mddi_host_type host);
+boolean mddi_host_register_read_int
+ (uint32 reg_addr, uint32 *reg_value_ptr, mddi_host_type host_idx);
+void mddi_queue_register_write_static
+ (uint32 reg_addr,
+ uint32 reg_val, boolean wait, mddi_llist_done_cb_type done_cb);
+void mddi_queue_static_window_adjust
+ (const mddi_reg_write_type *reg_write,
+ uint16 num_writes, mddi_llist_done_cb_type done_cb);
+
+#define mddi_queue_register_read(reg, val_ptr, wait, sig) \
+ mddi_host_register_read(reg, val_ptr, wait, MDDI_HOST_PRIM)
+#define mddi_queue_register_write(reg, val, wait, sig) \
+ mddi_host_register_write(reg, val, MDDI_DATA_PACKET_4_BYTES,\
+ wait, NULL, MDDI_HOST_PRIM)
+#define mddi_queue_register_write_extn(reg, val, pkt_size, wait, sig) \
+ mddi_host_register_write(reg, val, pkt_size, \
+ wait, NULL, MDDI_HOST_PRIM)
+#define mddi_queue_register_write_int(reg, val) \
+ mddi_host_register_write_int(reg, val, NULL, MDDI_HOST_PRIM)
+#define mddi_queue_register_read_int(reg, val_ptr) \
+ mddi_host_register_read_int(reg, val_ptr, MDDI_HOST_PRIM)
+#define mddi_queue_register_writes(reg_ptr, val, wait, sig) \
+ mddi_host_register_writes(reg_ptr, val, wait, sig, MDDI_HOST_PRIM)
+
+void mddi_wait(uint16 time_ms);
+void mddi_assign_max_pkt_dimensions(uint16 image_cols,
+ uint16 image_rows,
+ uint16 bpp,
+ uint16 *max_cols, uint16 * max_rows);
+uint16 mddi_assign_pkt_height(uint16 pkt_width, uint16 pkt_height, uint16 bpp);
+void mddi_queue_reverse_encapsulation(boolean wait);
+void mddi_disable(int lock);
+#endif /* MDDIHOST_H */
diff --git a/drivers/staging/msm/mddihost_e.c b/drivers/staging/msm/mddihost_e.c
new file mode 100644
index 0000000..7de5eda
--- /dev/null
+++ b/drivers/staging/msm/mddihost_e.c
@@ -0,0 +1,63 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+
+#include <linux/clk.h>
+#include <mach/clk.h>
+
+extern struct semaphore mddi_host_mutex;
+static boolean mddi_host_ext_powered = FALSE;
+
+void mddi_host_start_ext_display(void)
+{
+ down(&mddi_host_mutex);
+
+ if (!mddi_host_ext_powered) {
+ mddi_host_init(MDDI_HOST_EXT);
+
+ mddi_host_ext_powered = TRUE;
+ }
+
+ up(&mddi_host_mutex);
+}
+
+void mddi_host_stop_ext_display(void)
+{
+ down(&mddi_host_mutex);
+
+ if (mddi_host_ext_powered) {
+ mddi_host_powerdown(MDDI_HOST_EXT);
+
+ mddi_host_ext_powered = FALSE;
+ }
+
+ up(&mddi_host_mutex);
+}
diff --git a/drivers/staging/msm/mddihosti.c b/drivers/staging/msm/mddihosti.c
new file mode 100644
index 0000000..f9d6e91
--- /dev/null
+++ b/drivers/staging/msm/mddihosti.c
@@ -0,0 +1,2239 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+
+#include "msm_fb_panel.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+
+#define FEATURE_MDDI_UNDERRUN_RECOVERY
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+static void mddi_read_rev_packet(byte *data_ptr);
+#endif
+
+struct timer_list mddi_host_timer;
+
+#define MDDI_DEFAULT_TIMER_LENGTH 5000 /* 5 seconds */
+uint32 mddi_rtd_frequency = 60000; /* send RTD every 60 seconds */
+uint32 mddi_client_status_frequency = 60000; /* get status pkt every 60 secs */
+
+boolean mddi_vsync_detect_enabled = FALSE;
+mddi_gpio_info_type mddi_gpio;
+
+uint32 mddi_host_core_version;
+boolean mddi_debug_log_statistics = FALSE;
+/* #define FEATURE_MDDI_HOST_ENABLE_EARLY_HIBERNATION */
+/* default to TRUE in case MDP does not vote */
+static boolean mddi_host_mdp_active_flag = TRUE;
+static uint32 mddi_log_stats_counter;
+uint32 mddi_log_stats_frequency = 4000;
+
+#define MDDI_DEFAULT_REV_PKT_SIZE 0x20
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+static boolean mddi_rev_ptr_workaround = TRUE;
+static uint32 mddi_reg_read_retry;
+static uint32 mddi_reg_read_retry_max = 20;
+static boolean mddi_enable_reg_read_retry = TRUE;
+static boolean mddi_enable_reg_read_retry_once = FALSE;
+
+#define MDDI_MAX_REV_PKT_SIZE 0x60
+
+#define MDDI_CLIENT_CAPABILITY_REV_PKT_SIZE 0x60
+
+#define MDDI_VIDEO_REV_PKT_SIZE 0x40
+#define MDDI_REV_BUFFER_SIZE MDDI_MAX_REV_PKT_SIZE
+static byte rev_packet_data[MDDI_MAX_REV_PKT_SIZE];
+#endif /* FEATURE_MDDI_DISABLE_REVERSE */
+/* leave these variables so graphics will compile */
+
+#define MDDI_MAX_REV_DATA_SIZE 128
+/*lint -d__align(x) */
+boolean mddi_debug_clear_rev_data = TRUE;
+
+uint32 *mddi_reg_read_value_ptr;
+
+mddi_client_capability_type mddi_client_capability_pkt;
+static boolean mddi_client_capability_request = FALSE;
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+
+#define MAX_MDDI_REV_HANDLERS 2
+#define INVALID_PKT_TYPE 0xFFFF
+
+typedef struct {
+ mddi_rev_handler_type handler; /* ISR to be executed */
+ uint16 pkt_type;
+} mddi_rev_pkt_handler_type;
+static mddi_rev_pkt_handler_type mddi_rev_pkt_handler[MAX_MDDI_REV_HANDLERS] =
+ { {NULL, INVALID_PKT_TYPE}, {NULL, INVALID_PKT_TYPE} };
+
+static boolean mddi_rev_encap_user_request = FALSE;
+static mddi_linked_list_notify_type mddi_rev_user;
+
+spinlock_t mddi_host_spin_lock;
+extern uint32 mdp_in_processing;
+#endif
+
+typedef enum {
+ MDDI_REV_IDLE
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+ , MDDI_REV_REG_READ_ISSUED,
+ MDDI_REV_REG_READ_SENT,
+ MDDI_REV_ENCAP_ISSUED,
+ MDDI_REV_STATUS_REQ_ISSUED,
+ MDDI_REV_CLIENT_CAP_ISSUED
+#endif
+} mddi_rev_link_state_type;
+
+typedef enum {
+ MDDI_LINK_DISABLED,
+ MDDI_LINK_HIBERNATING,
+ MDDI_LINK_ACTIVATING,
+ MDDI_LINK_ACTIVE
+} mddi_host_link_state_type;
+
+typedef struct {
+ uint32 count;
+ uint32 in_count;
+ uint32 disp_req_count;
+ uint32 state_change_count;
+ uint32 ll_done_count;
+ uint32 rev_avail_count;
+ uint32 error_count;
+ uint32 rev_encap_count;
+ uint32 llist_ptr_write_1;
+ uint32 llist_ptr_write_2;
+} mddi_host_int_type;
+
+typedef struct {
+ uint32 fwd_crc_count;
+ uint32 rev_crc_count;
+ uint32 pri_underflow;
+ uint32 sec_underflow;
+ uint32 rev_overflow;
+ uint32 pri_overwrite;
+ uint32 sec_overwrite;
+ uint32 rev_overwrite;
+ uint32 dma_failure;
+ uint32 rtd_failure;
+ uint32 reg_read_failure;
+#ifdef FEATURE_MDDI_UNDERRUN_RECOVERY
+ uint32 pri_underrun_detected;
+#endif
+} mddi_host_stat_type;
+
+typedef struct {
+ uint32 rtd_cnt;
+ uint32 rev_enc_cnt;
+ uint32 vid_cnt;
+ uint32 reg_acc_cnt;
+ uint32 cli_stat_cnt;
+ uint32 cli_cap_cnt;
+ uint32 reg_read_cnt;
+ uint32 link_active_cnt;
+ uint32 link_hibernate_cnt;
+ uint32 vsync_response_cnt;
+ uint32 fwd_crc_cnt;
+ uint32 rev_crc_cnt;
+} mddi_log_params_struct_type;
+
+typedef struct {
+ uint32 rtd_value;
+ uint32 rtd_counter;
+ uint32 client_status_cnt;
+ boolean rev_ptr_written;
+ uint8 *rev_ptr_start;
+ uint8 *rev_ptr_curr;
+ uint32 mddi_rev_ptr_write_val;
+ dma_addr_t rev_data_dma_addr;
+ uint16 rev_pkt_size;
+ mddi_rev_link_state_type rev_state;
+ mddi_host_link_state_type link_state;
+ mddi_host_driver_state_type driver_state;
+ boolean disable_hibernation;
+ uint32 saved_int_reg;
+ uint32 saved_int_en;
+ mddi_linked_list_type *llist_ptr;
+ dma_addr_t llist_dma_addr;
+ mddi_linked_list_type *llist_dma_ptr;
+ uint32 *rev_data_buf;
+ struct completion mddi_llist_avail_comp;
+ boolean mddi_waiting_for_llist_avail;
+ mddi_host_int_type int_type;
+ mddi_host_stat_type stats;
+ mddi_log_params_struct_type log_parms;
+ mddi_llist_info_type llist_info;
+ mddi_linked_list_notify_type llist_notify[MDDI_MAX_NUM_LLIST_ITEMS];
+} mddi_host_cntl_type;
+
+static mddi_host_type mddi_curr_host = MDDI_HOST_PRIM;
+static mddi_host_cntl_type mhctl[MDDI_NUM_HOST_CORES];
+mddi_linked_list_type *llist_extern[MDDI_NUM_HOST_CORES];
+mddi_linked_list_type *llist_dma_extern[MDDI_NUM_HOST_CORES];
+mddi_linked_list_notify_type *llist_extern_notify[MDDI_NUM_HOST_CORES];
+static mddi_log_params_struct_type prev_parms[MDDI_NUM_HOST_CORES];
+
+extern uint32 mdp_total_vdopkts;
+
+static boolean mddi_host_io_clock_on = FALSE;
+static boolean mddi_host_hclk_on = FALSE;
+
+int int_mddi_pri_flag = FALSE;
+int int_mddi_ext_flag = FALSE;
+
+static void mddi_report_errors(uint32 int_reg)
+{
+ mddi_host_type host_idx = mddi_curr_host;
+ mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+ if (int_reg & MDDI_INT_PRI_UNDERFLOW) {
+ pmhctl->stats.pri_underflow++;
+ MDDI_MSG_ERR("!!! MDDI Primary Underflow !!!\n");
+ }
+ if (int_reg & MDDI_INT_SEC_UNDERFLOW) {
+ pmhctl->stats.sec_underflow++;
+ MDDI_MSG_ERR("!!! MDDI Secondary Underflow !!!\n");
+ }
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+ if (int_reg & MDDI_INT_REV_OVERFLOW) {
+ pmhctl->stats.rev_overflow++;
+ MDDI_MSG_ERR("!!! MDDI Reverse Overflow !!!\n");
+ pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+ mddi_host_reg_out(REV_PTR, pmhctl->mddi_rev_ptr_write_val);
+
+ }
+ if (int_reg & MDDI_INT_CRC_ERROR)
+ MDDI_MSG_ERR("!!! MDDI Reverse CRC Error !!!\n");
+#endif
+ if (int_reg & MDDI_INT_PRI_OVERWRITE) {
+ pmhctl->stats.pri_overwrite++;
+ MDDI_MSG_ERR("!!! MDDI Primary Overwrite !!!\n");
+ }
+ if (int_reg & MDDI_INT_SEC_OVERWRITE) {
+ pmhctl->stats.sec_overwrite++;
+ MDDI_MSG_ERR("!!! MDDI Secondary Overwrite !!!\n");
+ }
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+ if (int_reg & MDDI_INT_REV_OVERWRITE) {
+ pmhctl->stats.rev_overwrite++;
+ /* This will show up normally and is not a problem */
+ MDDI_MSG_DEBUG("MDDI Reverse Overwrite!\n");
+ }
+ if (int_reg & MDDI_INT_RTD_FAILURE) {
+ mddi_host_reg_outm(INTEN, MDDI_INT_RTD_FAILURE, 0);
+ pmhctl->stats.rtd_failure++;
+ MDDI_MSG_ERR("!!! MDDI RTD Failure !!!\n");
+ }
+#endif
+ if (int_reg & MDDI_INT_DMA_FAILURE) {
+ pmhctl->stats.dma_failure++;
+ MDDI_MSG_ERR("!!! MDDI DMA Abort !!!\n");
+ }
+}
+
+static void mddi_host_enable_io_clock(void)
+{
+ if (!MDDI_HOST_IS_IO_CLOCK_ON)
+ MDDI_HOST_ENABLE_IO_CLOCK;
+}
+
+static void mddi_host_enable_hclk(void)
+{
+
+ if (!MDDI_HOST_IS_HCLK_ON)
+ MDDI_HOST_ENABLE_HCLK;
+}
+
+static void mddi_host_disable_io_clock(void)
+{
+#ifndef FEATURE_MDDI_HOST_IO_CLOCK_CONTROL_DISABLE
+ if (MDDI_HOST_IS_IO_CLOCK_ON)
+ MDDI_HOST_DISABLE_IO_CLOCK;
+#endif
+}
+
+static void mddi_host_disable_hclk(void)
+{
+#ifndef FEATURE_MDDI_HOST_HCLK_CONTROL_DISABLE
+ if (MDDI_HOST_IS_HCLK_ON)
+ MDDI_HOST_DISABLE_HCLK;
+#endif
+}
+
+static void mddi_vote_to_sleep(mddi_host_type host_idx, boolean sleep)
+{
+ uint16 vote_mask;
+
+ if (host_idx == MDDI_HOST_PRIM)
+ vote_mask = 0x01;
+ else
+ vote_mask = 0x02;
+}
+
+static void mddi_report_state_change(uint32 int_reg)
+{
+ mddi_host_type host_idx = mddi_curr_host;
+ mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+ if ((pmhctl->saved_int_reg & MDDI_INT_IN_HIBERNATION) &&
+ (pmhctl->saved_int_reg & MDDI_INT_LINK_ACTIVE)) {
+ /* recover from condition where the io_clock was turned off by the
+ clock driver during a transition to hibernation. The io_clock
+ disable is to prevent MDP/MDDI underruns when changing ARM
+ clock speeds. In the process of halting the ARM, the hclk
+ divider needs to be set to 1. When it is set to 1, there is
+ a small time (usecs) when hclk is off or slow, and this can
+ cause an underrun. To prevent the underrun, clock driver turns
+ off the MDDI io_clock before making the change. */
+ mddi_host_reg_out(CMD, MDDI_CMD_POWERUP);
+ }
+
+ if (int_reg & MDDI_INT_LINK_ACTIVE) {
+ pmhctl->link_state = MDDI_LINK_ACTIVE;
+ pmhctl->log_parms.link_active_cnt++;
+ pmhctl->rtd_value = mddi_host_reg_in(RTD_VAL);
+ MDDI_MSG_DEBUG("!!! MDDI Active RTD:0x%x!!!\n",
+ pmhctl->rtd_value);
+ /* now interrupt on hibernation */
+ mddi_host_reg_outm(INTEN,
+ (MDDI_INT_IN_HIBERNATION |
+ MDDI_INT_LINK_ACTIVE),
+ MDDI_INT_IN_HIBERNATION);
+
+#ifdef DEBUG_MDDIHOSTI
+ /* if gpio interrupt is enabled, start polling at fastest
+ * registered rate
+ */
+ if (mddi_gpio.polling_enabled) {
+ timer_reg(&mddi_gpio_poll_timer,
+ mddi_gpio_poll_timer_cb, 0, mddi_gpio.polling_interval, 0);
+ }
+#endif
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+ if (mddi_rev_ptr_workaround) {
+ /* HW CR: need to reset reverse register stuff */
+ pmhctl->rev_ptr_written = FALSE;
+ pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+ }
+#endif
+ /* vote on sleep */
+ mddi_vote_to_sleep(host_idx, FALSE);
+
+ if (host_idx == MDDI_HOST_PRIM) {
+ if (mddi_vsync_detect_enabled) {
+ /*
+ * Indicate to client specific code that vsync
+ * was enabled, but we did not detect a client
+ * intiated wakeup. The client specific
+ * handler can either reassert vsync detection,
+ * or treat this as a valid vsync.
+ */
+ mddi_client_lcd_vsync_detected(FALSE);
+ pmhctl->log_parms.vsync_response_cnt++;
+ }
+ }
+ }
+ if (int_reg & MDDI_INT_IN_HIBERNATION) {
+ pmhctl->link_state = MDDI_LINK_HIBERNATING;
+ pmhctl->log_parms.link_hibernate_cnt++;
+ MDDI_MSG_DEBUG("!!! MDDI Hibernating !!!\n");
+ /* now interrupt on link_active */
+#ifdef FEATURE_MDDI_DISABLE_REVERSE
+ mddi_host_reg_outm(INTEN,
+ (MDDI_INT_MDDI_IN |
+ MDDI_INT_IN_HIBERNATION |
+ MDDI_INT_LINK_ACTIVE),
+ MDDI_INT_LINK_ACTIVE);
+#else
+ mddi_host_reg_outm(INTEN,
+ (MDDI_INT_MDDI_IN |
+ MDDI_INT_IN_HIBERNATION |
+ MDDI_INT_LINK_ACTIVE),
+ (MDDI_INT_MDDI_IN | MDDI_INT_LINK_ACTIVE));
+
+ pmhctl->rtd_counter = mddi_rtd_frequency;
+
+ if (pmhctl->rev_state != MDDI_REV_IDLE) {
+ /* a rev_encap will not wake up the link, so we do that here */
+ pmhctl->link_state = MDDI_LINK_ACTIVATING;
+ mddi_host_reg_out(CMD, MDDI_CMD_LINK_ACTIVE);
+ }
+#endif
+
+ if (pmhctl->disable_hibernation) {
+ mddi_host_reg_out(CMD, MDDI_CMD_HIBERNATE);
+ mddi_host_reg_out(CMD, MDDI_CMD_LINK_ACTIVE);
+ pmhctl->link_state = MDDI_LINK_ACTIVATING;
+ }
+#ifdef FEATURE_MDDI_UNDERRUN_RECOVERY
+ if ((pmhctl->llist_info.transmitting_start_idx !=
+ UNASSIGNED_INDEX)
+ &&
+ ((pmhctl->
+ saved_int_reg & (MDDI_INT_PRI_LINK_LIST_DONE |
+ MDDI_INT_PRI_PTR_READ)) ==
+ MDDI_INT_PRI_PTR_READ)) {
+ mddi_linked_list_type *llist_dma;
+ llist_dma = pmhctl->llist_dma_ptr;
+ /*
+ * All indications are that we have not received a
+ * linked list done interrupt, due to an underrun
+ * condition. Recovery attempt is to send again.
+ */
+ dma_coherent_pre_ops();
+ /* Write to primary pointer register again */
+ mddi_host_reg_out(PRI_PTR,
+ &llist_dma[pmhctl->llist_info.
+ transmitting_start_idx]);
+ pmhctl->stats.pri_underrun_detected++;
+ }
+#endif
+
+ /* vote on sleep */
+ if (pmhctl->link_state == MDDI_LINK_HIBERNATING) {
+ mddi_vote_to_sleep(host_idx, TRUE);
+ }
+
+#ifdef DEBUG_MDDIHOSTI
+ /* need to stop polling timer */
+ if (mddi_gpio.polling_enabled) {
+ (void) timer_clr(&mddi_gpio_poll_timer, T_NONE);
+ }
+#endif
+ }
+}
+
+void mddi_host_timer_service(unsigned long data)
+{
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+ unsigned long flags;
+#endif
+ mddi_host_type host_idx;
+ mddi_host_cntl_type *pmhctl;
+
+ unsigned long time_ms = MDDI_DEFAULT_TIMER_LENGTH;
+ init_timer(&mddi_host_timer);
+ mddi_host_timer.function = mddi_host_timer_service;
+ mddi_host_timer.data = 0;
+
+ mddi_host_timer.expires = jiffies + ((time_ms * HZ) / 1000);
+ add_timer(&mddi_host_timer);
+
+ for (host_idx = MDDI_HOST_PRIM; host_idx < MDDI_NUM_HOST_CORES;
+ host_idx++) {
+ pmhctl = &(mhctl[host_idx]);
+ mddi_log_stats_counter += (uint32) time_ms;
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+ pmhctl->rtd_counter += (uint32) time_ms;
+ pmhctl->client_status_cnt += (uint32) time_ms;
+
+ if (host_idx == MDDI_HOST_PRIM) {
+ if (pmhctl->client_status_cnt >=
+ mddi_client_status_frequency) {
+ if ((pmhctl->link_state ==
+ MDDI_LINK_HIBERNATING)
+ && (pmhctl->client_status_cnt >
+ mddi_client_status_frequency)) {
+ /*
+ * special case where we are hibernating
+ * and mddi_host_isr is not firing, so
+ * kick the link so that the status can
+ * be retrieved
+ */
+
+ /* need to wake up link before issuing
+ * rev encap command
+ */
+ MDDI_MSG_INFO("wake up link!\n");
+ spin_lock_irqsave(&mddi_host_spin_lock,
+ flags);
+ mddi_host_enable_hclk();
+ mddi_host_enable_io_clock();
+ pmhctl->link_state =
+ MDDI_LINK_ACTIVATING;
+ mddi_host_reg_out(CMD,
+ MDDI_CMD_LINK_ACTIVE);
+ spin_unlock_irqrestore
+ (&mddi_host_spin_lock, flags);
+ } else
+ if ((pmhctl->link_state == MDDI_LINK_ACTIVE)
+ && pmhctl->disable_hibernation) {
+ /*
+ * special case where we have disabled
+ * hibernation and mddi_host_isr
+ * is not firing, so enable interrupt
+ * for no pkts pending, which will
+ * generate an interrupt
+ */
+ MDDI_MSG_INFO("kick isr!\n");
+ spin_lock_irqsave(&mddi_host_spin_lock,
+ flags);
+ mddi_host_enable_hclk();
+ mddi_host_reg_outm(INTEN,
+ MDDI_INT_NO_CMD_PKTS_PEND,
+ MDDI_INT_NO_CMD_PKTS_PEND);
+ spin_unlock_irqrestore
+ (&mddi_host_spin_lock, flags);
+ }
+ }
+ }
+#endif /* #ifndef FEATURE_MDDI_DISABLE_REVERSE */
+ }
+
+ /* Check if logging is turned on */
+ for (host_idx = MDDI_HOST_PRIM; host_idx < MDDI_NUM_HOST_CORES;
+ host_idx++) {
+ mddi_log_params_struct_type *prev_ptr = &(prev_parms[host_idx]);
+ pmhctl = &(mhctl[host_idx]);
+
+ if (mddi_debug_log_statistics) {
+
+ /* get video pkt count from MDP, since MDDI sw cannot know this */
+ pmhctl->log_parms.vid_cnt = mdp_total_vdopkts;
+
+ if (mddi_log_stats_counter >= mddi_log_stats_frequency) {
+ /* mddi_log_stats_counter = 0; */
+ if (mddi_debug_log_statistics) {
+ MDDI_MSG_NOTICE
+ ("MDDI Statistics since last report:\n");
+ MDDI_MSG_NOTICE(" Packets sent:\n");
+ MDDI_MSG_NOTICE
+ (" %d RTD packet(s)\n",
+ pmhctl->log_parms.rtd_cnt -
+ prev_ptr->rtd_cnt);
+ if (prev_ptr->rtd_cnt !=
+ pmhctl->log_parms.rtd_cnt) {
+ unsigned long flags;
+ spin_lock_irqsave
+ (&mddi_host_spin_lock,
+ flags);
+ mddi_host_enable_hclk();
+ pmhctl->rtd_value =
+ mddi_host_reg_in(RTD_VAL);
+ spin_unlock_irqrestore
+ (&mddi_host_spin_lock,
+ flags);
+ MDDI_MSG_NOTICE
+ (" RTD value=%d\n",
+ pmhctl->rtd_value);
+ }
+ MDDI_MSG_NOTICE
+ (" %d VIDEO packets\n",
+ pmhctl->log_parms.vid_cnt -
+ prev_ptr->vid_cnt);
+ MDDI_MSG_NOTICE
+ (" %d Register Access packets\n",
+ pmhctl->log_parms.reg_acc_cnt -
+ prev_ptr->reg_acc_cnt);
+ MDDI_MSG_NOTICE
+ (" %d Reverse Encapsulation packet(s)\n",
+ pmhctl->log_parms.rev_enc_cnt -
+ prev_ptr->rev_enc_cnt);
+ if (prev_ptr->rev_enc_cnt !=
+ pmhctl->log_parms.rev_enc_cnt) {
+ /* report # of reverse CRC errors */
+ MDDI_MSG_NOTICE
+ (" %d reverse CRC errors detected\n",
+ pmhctl->log_parms.
+ rev_crc_cnt -
+ prev_ptr->rev_crc_cnt);
+ }
+ MDDI_MSG_NOTICE
+ (" Packets received:\n");
+ MDDI_MSG_NOTICE
+ (" %d Client Status packets",
+ pmhctl->log_parms.cli_stat_cnt -
+ prev_ptr->cli_stat_cnt);
+ if (prev_ptr->cli_stat_cnt !=
+ pmhctl->log_parms.cli_stat_cnt) {
+ MDDI_MSG_NOTICE
+ (" %d forward CRC errors reported\n",
+ pmhctl->log_parms.
+ fwd_crc_cnt -
+ prev_ptr->fwd_crc_cnt);
+ }
+ MDDI_MSG_NOTICE
+ (" %d Register Access Read packets\n",
+ pmhctl->log_parms.reg_read_cnt -
+ prev_ptr->reg_read_cnt);
+
+ if (pmhctl->link_state ==
+ MDDI_LINK_ACTIVE) {
+ MDDI_MSG_NOTICE
+ (" Current Link Status: Active\n");
+ } else
+ if ((pmhctl->link_state ==
+ MDDI_LINK_HIBERNATING)
+ || (pmhctl->link_state ==
+ MDDI_LINK_ACTIVATING)) {
+ MDDI_MSG_NOTICE
+ (" Current Link Status: Hibernation\n");
+ } else {
+ MDDI_MSG_NOTICE
+ (" Current Link Status: Inactive\n");
+ }
+ MDDI_MSG_NOTICE
+ (" Active state entered %d times\n",
+ pmhctl->log_parms.link_active_cnt -
+ prev_ptr->link_active_cnt);
+ MDDI_MSG_NOTICE
+ (" Hibernation state entered %d times\n",
+ pmhctl->log_parms.
+ link_hibernate_cnt -
+ prev_ptr->link_hibernate_cnt);
+ }
+ }
+ prev_parms[host_idx] = pmhctl->log_parms;
+ }
+ }
+ if (mddi_log_stats_counter >= mddi_log_stats_frequency)
+ mddi_log_stats_counter = 0;
+
+ return;
+} /* mddi_host_timer_cb */
+
+static void mddi_process_link_list_done(void)
+{
+ mddi_host_type host_idx = mddi_curr_host;
+ mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+ /* normal forward linked list packet(s) were sent */
+ if (pmhctl->llist_info.transmitting_start_idx == UNASSIGNED_INDEX) {
+ MDDI_MSG_ERR("**** getting LL done, but no list ****\n");
+ } else {
+ uint16 idx;
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+ if (pmhctl->rev_state == MDDI_REV_REG_READ_ISSUED) {
+ /* special case where a register read packet was sent */
+ pmhctl->rev_state = MDDI_REV_REG_READ_SENT;
+ if (pmhctl->llist_info.reg_read_idx == UNASSIGNED_INDEX) {
+ MDDI_MSG_ERR
+ ("**** getting LL done, but no list ****\n");
+ }
+ }
+#endif
+ for (idx = pmhctl->llist_info.transmitting_start_idx;;) {
+ uint16 next_idx = pmhctl->llist_notify[idx].next_idx;
+ /* with reg read we don't release the waiting tcb until after
+ * the reverse encapsulation has completed.
+ */
+ if (idx != pmhctl->llist_info.reg_read_idx) {
+ /* notify task that may be waiting on this completion */
+ if (pmhctl->llist_notify[idx].waiting) {
+ complete(&
+ (pmhctl->llist_notify[idx].
+ done_comp));
+ }
+ if (pmhctl->llist_notify[idx].done_cb != NULL) {
+ (*(pmhctl->llist_notify[idx].done_cb))
+ ();
+ }
+
+ pmhctl->llist_notify[idx].in_use = FALSE;
+ pmhctl->llist_notify[idx].waiting = FALSE;
+ pmhctl->llist_notify[idx].done_cb = NULL;
+ if (idx < MDDI_NUM_DYNAMIC_LLIST_ITEMS) {
+ /* static LLIST items are configured only once */
+ pmhctl->llist_notify[idx].next_idx =
+ UNASSIGNED_INDEX;
+ }
+ /*
+ * currently, all linked list packets are
+ * register access, so we can increment the
+ * counter for that packet type here.
+ */
+ pmhctl->log_parms.reg_acc_cnt++;
+ }
+ if (idx == pmhctl->llist_info.transmitting_end_idx)
+ break;
+ idx = next_idx;
+ if (idx == UNASSIGNED_INDEX)
+ MDDI_MSG_CRIT("MDDI linked list corruption!\n");
+ }
+
+ pmhctl->llist_info.transmitting_start_idx = UNASSIGNED_INDEX;
+ pmhctl->llist_info.transmitting_end_idx = UNASSIGNED_INDEX;
+
+ if (pmhctl->mddi_waiting_for_llist_avail) {
+ if (!
+ (pmhctl->
+ llist_notify[pmhctl->llist_info.next_free_idx].
+ in_use)) {
+ pmhctl->mddi_waiting_for_llist_avail = FALSE;
+ complete(&(pmhctl->mddi_llist_avail_comp));
+ }
+ }
+ }
+
+ /* Turn off MDDI_INT_PRI_LINK_LIST_DONE interrupt */
+ mddi_host_reg_outm(INTEN, MDDI_INT_PRI_LINK_LIST_DONE, 0);
+
+}
+
+static void mddi_queue_forward_linked_list(void)
+{
+ uint16 first_pkt_index;
+ mddi_linked_list_type *llist_dma;
+ mddi_host_type host_idx = mddi_curr_host;
+ mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+ llist_dma = pmhctl->llist_dma_ptr;
+
+ first_pkt_index = UNASSIGNED_INDEX;
+
+ if (pmhctl->llist_info.transmitting_start_idx == UNASSIGNED_INDEX) {
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+ if (pmhctl->llist_info.reg_read_waiting) {
+ if (pmhctl->rev_state == MDDI_REV_IDLE) {
+ /*
+ * we have a register read to send and
+ * can send it now
+ */
+ pmhctl->rev_state = MDDI_REV_REG_READ_ISSUED;
+ mddi_reg_read_retry = 0;
+ first_pkt_index =
+ pmhctl->llist_info.waiting_start_idx;
+ pmhctl->llist_info.reg_read_waiting = FALSE;
+ }
+ } else
+#endif
+ {
+ /*
+ * not register read to worry about, go ahead and write
+ * anything that may be on the waiting list.
+ */
+ first_pkt_index = pmhctl->llist_info.waiting_start_idx;
+ }
+ }
+
+ if (first_pkt_index != UNASSIGNED_INDEX) {
+ pmhctl->llist_info.transmitting_start_idx =
+ pmhctl->llist_info.waiting_start_idx;
+ pmhctl->llist_info.transmitting_end_idx =
+ pmhctl->llist_info.waiting_end_idx;
+ pmhctl->llist_info.waiting_start_idx = UNASSIGNED_INDEX;
+ pmhctl->llist_info.waiting_end_idx = UNASSIGNED_INDEX;
+
+ /* write to the primary pointer register */
+ MDDI_MSG_DEBUG("MDDI writing primary ptr with idx=%d\n",
+ first_pkt_index);
+
+ pmhctl->int_type.llist_ptr_write_2++;
+
+ dma_coherent_pre_ops();
+ mddi_host_reg_out(PRI_PTR, &llist_dma[first_pkt_index]);
+
+ /* enable interrupt when complete */
+ mddi_host_reg_outm(INTEN, MDDI_INT_PRI_LINK_LIST_DONE,
+ MDDI_INT_PRI_LINK_LIST_DONE);
+
+ }
+
+}
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+static void mddi_read_rev_packet(byte *data_ptr)
+{
+ uint16 i, length;
+ mddi_host_type host_idx = mddi_curr_host;
+ mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+ uint8 *rev_ptr_overflow =
+ (pmhctl->rev_ptr_start + MDDI_REV_BUFFER_SIZE);
+
+ /* first determine the length and handle invalid lengths */
+ length = *pmhctl->rev_ptr_curr++;
+ if (pmhctl->rev_ptr_curr >= rev_ptr_overflow)
+ pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+ length |= ((*pmhctl->rev_ptr_curr++) << 8);
+ if (pmhctl->rev_ptr_curr >= rev_ptr_overflow)
+ pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+ if (length > (pmhctl->rev_pkt_size - 2)) {
+ MDDI_MSG_ERR("Invalid rev pkt length %d\n", length);
+ /* rev_pkt_size should always be <= rev_ptr_size so limit to packet size */
+ length = pmhctl->rev_pkt_size - 2;
+ }
+
+ /* If the data pointer is NULL, just increment the pmhctl->rev_ptr_curr.
+ * Loop around if necessary. Don't bother reading the data.
+ */
+ if (data_ptr == NULL) {
+ pmhctl->rev_ptr_curr += length;
+ if (pmhctl->rev_ptr_curr >= rev_ptr_overflow)
+ pmhctl->rev_ptr_curr -= MDDI_REV_BUFFER_SIZE;
+ return;
+ }
+
+ data_ptr[0] = length & 0x0ff;
+ data_ptr[1] = length >> 8;
+ data_ptr += 2;
+ /* copy the data to data_ptr byte-at-a-time */
+ for (i = 0; (i < length) && (pmhctl->rev_ptr_curr < rev_ptr_overflow);
+ i++)
+ *data_ptr++ = *pmhctl->rev_ptr_curr++;
+ if (pmhctl->rev_ptr_curr >= rev_ptr_overflow)
+ pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+ for (; (i < length) && (pmhctl->rev_ptr_curr < rev_ptr_overflow); i++)
+ *data_ptr++ = *pmhctl->rev_ptr_curr++;
+}
+
+static void mddi_process_rev_packets(void)
+{
+ uint32 rev_packet_count;
+ word i;
+ uint32 crc_errors;
+ boolean mddi_reg_read_successful = FALSE;
+ mddi_host_type host_idx = mddi_curr_host;
+ mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+ pmhctl->log_parms.rev_enc_cnt++;
+ if ((pmhctl->rev_state != MDDI_REV_ENCAP_ISSUED) &&
+ (pmhctl->rev_state != MDDI_REV_STATUS_REQ_ISSUED) &&
+ (pmhctl->rev_state != MDDI_REV_CLIENT_CAP_ISSUED)) {
+ MDDI_MSG_ERR("Wrong state %d for reverse int\n",
+ pmhctl->rev_state);
+ }
+ /* Turn off MDDI_INT_REV_AVAIL interrupt */
+ mddi_host_reg_outm(INTEN, MDDI_INT_REV_DATA_AVAIL, 0);
+
+ /* Clear rev data avail int */
+ mddi_host_reg_out(INT, MDDI_INT_REV_DATA_AVAIL);
+
+ /* Get Number of packets */
+ rev_packet_count = mddi_host_reg_in(REV_PKT_CNT);
+
+#ifndef T_MSM7500
+ /* Clear out rev packet counter */
+ mddi_host_reg_out(REV_PKT_CNT, 0x0000);
+#endif
+
+#if defined(CONFIG_FB_MSM_MDP31) || defined(CONFIG_FB_MSM_MDP40)
+ if ((pmhctl->rev_state == MDDI_REV_CLIENT_CAP_ISSUED) &&
+ (rev_packet_count > 0) &&
+ (mddi_host_core_version == 0x28 ||
+ mddi_host_core_version == 0x30)) {
+
+ uint32 int_reg;
+ uint32 max_count = 0;
+
+ mddi_host_reg_out(REV_PTR, pmhctl->mddi_rev_ptr_write_val);
+ int_reg = mddi_host_reg_in(INT);
+ while ((int_reg & 0x100000) == 0) {
+ udelay(3);
+ int_reg = mddi_host_reg_in(INT);
+ if (++max_count > 100)
+ break;
+ }
+ }
+#endif
+
+ /* Get CRC error count */
+ crc_errors = mddi_host_reg_in(REV_CRC_ERR);
+ if (crc_errors != 0) {
+ pmhctl->log_parms.rev_crc_cnt += crc_errors;
+ pmhctl->stats.rev_crc_count += crc_errors;
+ MDDI_MSG_ERR("!!! MDDI %d Reverse CRC Error(s) !!!\n",
+ crc_errors);
+#ifndef T_MSM7500
+ /* Clear CRC error count */
+ mddi_host_reg_out(REV_CRC_ERR, 0x0000);
+#endif
+ /* also issue an RTD to attempt recovery */
+ pmhctl->rtd_counter = mddi_rtd_frequency;
+ }
+
+ pmhctl->rtd_value = mddi_host_reg_in(RTD_VAL);
+
+ MDDI_MSG_DEBUG("MDDI rev pkt cnt=%d, ptr=0x%x, RTD:0x%x\n",
+ rev_packet_count,
+ pmhctl->rev_ptr_curr - pmhctl->rev_ptr_start,
+ pmhctl->rtd_value);
+
+ if (rev_packet_count >= 1) {
+ mddi_invalidate_cache_lines((uint32 *) pmhctl->rev_ptr_start,
+ MDDI_REV_BUFFER_SIZE);
+ }
+ /* order the reads */
+ dma_coherent_post_ops();
+ for (i = 0; i < rev_packet_count; i++) {
+ mddi_rev_packet_type *rev_pkt_ptr;
+
+ mddi_read_rev_packet(rev_packet_data);
+
+ rev_pkt_ptr = (mddi_rev_packet_type *) rev_packet_data;
+
+ if (rev_pkt_ptr->packet_length > pmhctl->rev_pkt_size) {
+ MDDI_MSG_ERR("!!!invalid packet size: %d\n",
+ rev_pkt_ptr->packet_length);
+ }
+
+ MDDI_MSG_DEBUG("MDDI rev pkt 0x%x size 0x%x\n",
+ rev_pkt_ptr->packet_type,
+ rev_pkt_ptr->packet_length);
+
+ /* Do whatever you want to do with the data based on the packet type */
+ switch (rev_pkt_ptr->packet_type) {
+ case 66: /* Client Capability */
+ {
+ mddi_client_capability_type
+ *client_capability_pkt_ptr;
+
+ client_capability_pkt_ptr =
+ (mddi_client_capability_type *)
+ rev_packet_data;
+ MDDI_MSG_NOTICE
+ ("Client Capability: Week=%d, Year=%d\n",
+ client_capability_pkt_ptr->
+ Week_of_Manufacture,
+ client_capability_pkt_ptr->
+ Year_of_Manufacture);
+ memcpy((void *)&mddi_client_capability_pkt,
+ (void *)rev_packet_data,
+ sizeof(mddi_client_capability_type));
+ pmhctl->log_parms.cli_cap_cnt++;
+ }
+ break;
+
+ case 70: /* Display Status */
+ {
+ mddi_client_status_type *client_status_pkt_ptr;
+
+ client_status_pkt_ptr =
+ (mddi_client_status_type *) rev_packet_data;
+ if ((client_status_pkt_ptr->crc_error_count !=
+ 0)
+ || (client_status_pkt_ptr->
+ reverse_link_request != 0)) {
+ MDDI_MSG_ERR
+ ("Client Status: RevReq=%d, CrcErr=%d\n",
+ client_status_pkt_ptr->
+ reverse_link_request,
+ client_status_pkt_ptr->
+ crc_error_count);
+ } else {
+ MDDI_MSG_DEBUG
+ ("Client Status: RevReq=%d, CrcErr=%d\n",
+ client_status_pkt_ptr->
+ reverse_link_request,
+ client_status_pkt_ptr->
+ crc_error_count);
+ }
+ pmhctl->log_parms.fwd_crc_cnt +=
+ client_status_pkt_ptr->crc_error_count;
+ pmhctl->stats.fwd_crc_count +=
+ client_status_pkt_ptr->crc_error_count;
+ pmhctl->log_parms.cli_stat_cnt++;
+ }
+ break;
+
+ case 146: /* register access packet */
+ {
+ mddi_register_access_packet_type
+ * regacc_pkt_ptr;
+
+ regacc_pkt_ptr =
+ (mddi_register_access_packet_type *)
+ rev_packet_data;
+
+ MDDI_MSG_DEBUG
+ ("Reg Acc parse reg=0x%x, value=0x%x\n",
+ regacc_pkt_ptr->register_address,
+ regacc_pkt_ptr->register_data_list);
+
+ /* Copy register value to location passed in */
+ if (mddi_reg_read_value_ptr) {
+#if defined(T_MSM6280) && !defined(T_MSM7200)
+ /* only least significant 16 bits are valid with 6280 */
+ *mddi_reg_read_value_ptr =
+ regacc_pkt_ptr->
+ register_data_list & 0x0000ffff;
+#else
+ *mddi_reg_read_value_ptr =
+ regacc_pkt_ptr->register_data_list;
+#endif
+ mddi_reg_read_successful = TRUE;
+ mddi_reg_read_value_ptr = NULL;
+ }
+
+#ifdef DEBUG_MDDIHOSTI
+ if ((mddi_gpio.polling_enabled) &&
+ (regacc_pkt_ptr->register_address ==
+ mddi_gpio.polling_reg)) {
+ /*
+ * ToDo: need to call Linux GPIO call
+ * here...
+ */
+ mddi_client_lcd_gpio_poll(
+ regacc_pkt_ptr->register_data_list);
+ }
+#endif
+ pmhctl->log_parms.reg_read_cnt++;
+ }
+ break;
+
+ default: /* any other packet */
+ {
+ uint16 hdlr;
+
+ for (hdlr = 0; hdlr < MAX_MDDI_REV_HANDLERS;
+ hdlr++) {
+ if (mddi_rev_pkt_handler[hdlr].
+ pkt_type ==
+ rev_pkt_ptr->packet_type) {
+ (*
+ (mddi_rev_pkt_handler[hdlr].
+ handler)) (rev_pkt_ptr);
+ /* pmhctl->rev_state = MDDI_REV_IDLE; */
+ break;
+ }
+ }
+ if (hdlr >= MAX_MDDI_REV_HANDLERS)
+ MDDI_MSG_ERR("MDDI unknown rev pkt\n");
+ }
+ break;
+ }
+ }
+ if ((pmhctl->rev_ptr_curr + pmhctl->rev_pkt_size) >=
+ (pmhctl->rev_ptr_start + MDDI_REV_BUFFER_SIZE)) {
+ pmhctl->rev_ptr_written = FALSE;
+ }
+
+ if (pmhctl->rev_state == MDDI_REV_ENCAP_ISSUED) {
+ pmhctl->rev_state = MDDI_REV_IDLE;
+ if (mddi_rev_user.waiting) {
+ mddi_rev_user.waiting = FALSE;
+ complete(&(mddi_rev_user.done_comp));
+ } else if (pmhctl->llist_info.reg_read_idx == UNASSIGNED_INDEX) {
+ MDDI_MSG_ERR
+ ("Reverse Encap state, but no reg read in progress\n");
+ } else {
+ if ((!mddi_reg_read_successful) &&
+ (mddi_reg_read_retry < mddi_reg_read_retry_max) &&
+ (mddi_enable_reg_read_retry)) {
+ /*
+ * There is a race condition that can happen
+ * where the reverse encapsulation message is
+ * sent out by the MDDI host before the register
+ * read packet is sent. As a work-around for
+ * that problem we issue the reverse
+ * encapsulation one more time before giving up.
+ */
+ if (mddi_enable_reg_read_retry_once)
+ mddi_reg_read_retry =
+ mddi_reg_read_retry_max;
+ pmhctl->rev_state = MDDI_REV_REG_READ_SENT;
+ pmhctl->stats.reg_read_failure++;
+ } else {
+ uint16 reg_read_idx =
+ pmhctl->llist_info.reg_read_idx;
+
+ mddi_reg_read_retry = 0;
+ if (pmhctl->llist_notify[reg_read_idx].waiting) {
+ complete(&
+ (pmhctl->
+ llist_notify[reg_read_idx].
+ done_comp));
+ }
+ pmhctl->llist_info.reg_read_idx =
+ UNASSIGNED_INDEX;
+ if (pmhctl->llist_notify[reg_read_idx].
+ done_cb != NULL) {
+ (*
+ (pmhctl->llist_notify[reg_read_idx].
+ done_cb)) ();
+ }
+ pmhctl->llist_notify[reg_read_idx].next_idx =
+ UNASSIGNED_INDEX;
+ pmhctl->llist_notify[reg_read_idx].in_use =
+ FALSE;
+ pmhctl->llist_notify[reg_read_idx].waiting =
+ FALSE;
+ pmhctl->llist_notify[reg_read_idx].done_cb =
+ NULL;
+ if (!mddi_reg_read_successful)
+ pmhctl->stats.reg_read_failure++;
+ }
+ }
+ } else if (pmhctl->rev_state == MDDI_REV_CLIENT_CAP_ISSUED) {
+#if defined(CONFIG_FB_MSM_MDP31) || defined(CONFIG_FB_MSM_MDP40)
+ if (mddi_host_core_version == 0x28 ||
+ mddi_host_core_version == 0x30) {
+ mddi_host_reg_out(FIFO_ALLOC, 0x00);
+ pmhctl->rev_ptr_written = TRUE;
+ mddi_host_reg_out(REV_PTR,
+ pmhctl->mddi_rev_ptr_write_val);
+ pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+ mddi_host_reg_out(CMD, 0xC00);
+ }
+#endif
+
+ if (mddi_rev_user.waiting) {
+ mddi_rev_user.waiting = FALSE;
+ complete(&(mddi_rev_user.done_comp));
+ }
+ pmhctl->rev_state = MDDI_REV_IDLE;
+ } else {
+ pmhctl->rev_state = MDDI_REV_IDLE;
+ }
+
+ /* pmhctl->rev_state = MDDI_REV_IDLE; */
+
+ /* Re-enable interrupt */
+ mddi_host_reg_outm(INTEN, MDDI_INT_REV_DATA_AVAIL,
+ MDDI_INT_REV_DATA_AVAIL);
+
+}
+
+static void mddi_issue_reverse_encapsulation(void)
+{
+ mddi_host_type host_idx = mddi_curr_host;
+ mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+ /* Only issue a reverse encapsulation packet if:
+ * 1) another reverse is not in progress (MDDI_REV_IDLE).
+ * 2) a register read has been sent (MDDI_REV_REG_READ_SENT).
+ * 3) forward is not in progress, because of a hw bug in client that
+ * causes forward crc errors on packet immediately after rev encap.
+ */
+ if (((pmhctl->rev_state == MDDI_REV_IDLE) ||
+ (pmhctl->rev_state == MDDI_REV_REG_READ_SENT)) &&
+ (pmhctl->llist_info.transmitting_start_idx == UNASSIGNED_INDEX) &&
+ (!mdp_in_processing)) {
+ uint32 mddi_command = MDDI_CMD_SEND_REV_ENCAP;
+
+ if ((pmhctl->rev_state == MDDI_REV_REG_READ_SENT) ||
+ (mddi_rev_encap_user_request == TRUE)) {
+ mddi_host_enable_io_clock();
+ if (pmhctl->link_state == MDDI_LINK_HIBERNATING) {
+ /* need to wake up link before issuing rev encap command */
+ MDDI_MSG_DEBUG("wake up link!\n");
+ pmhctl->link_state = MDDI_LINK_ACTIVATING;
+ mddi_host_reg_out(CMD, MDDI_CMD_LINK_ACTIVE);
+ } else {
+ if (pmhctl->rtd_counter >= mddi_rtd_frequency) {
+ MDDI_MSG_DEBUG
+ ("mddi sending RTD command!\n");
+ mddi_host_reg_out(CMD,
+ MDDI_CMD_SEND_RTD);
+ pmhctl->rtd_counter = 0;
+ pmhctl->log_parms.rtd_cnt++;
+ }
+ if (pmhctl->rev_state != MDDI_REV_REG_READ_SENT) {
+ /* this is generic reverse request by user, so
+ * reset the waiting flag. */
+ mddi_rev_encap_user_request = FALSE;
+ }
+ /* link is active so send reverse encap to get register read results */
+ pmhctl->rev_state = MDDI_REV_ENCAP_ISSUED;
+ mddi_command = MDDI_CMD_SEND_REV_ENCAP;
+ MDDI_MSG_DEBUG("sending rev encap!\n");
+ }
+ } else
+ if ((pmhctl->client_status_cnt >=
+ mddi_client_status_frequency)
+ || mddi_client_capability_request) {
+ mddi_host_enable_io_clock();
+ if (pmhctl->link_state == MDDI_LINK_HIBERNATING) {
+ /* only wake up the link if it client status is overdue */
+ if ((pmhctl->client_status_cnt >=
+ (mddi_client_status_frequency * 2))
+ || mddi_client_capability_request) {
+ /* need to wake up link before issuing rev encap command */
+ MDDI_MSG_DEBUG("wake up link!\n");
+ pmhctl->link_state =
+ MDDI_LINK_ACTIVATING;
+ mddi_host_reg_out(CMD,
+ MDDI_CMD_LINK_ACTIVE);
+ }
+ } else {
+ if (pmhctl->rtd_counter >= mddi_rtd_frequency) {
+ MDDI_MSG_DEBUG
+ ("mddi sending RTD command!\n");
+ mddi_host_reg_out(CMD,
+ MDDI_CMD_SEND_RTD);
+ pmhctl->rtd_counter = 0;
+ pmhctl->log_parms.rtd_cnt++;
+ }
+ /* periodically get client status */
+ MDDI_MSG_DEBUG
+ ("mddi sending rev enc! (get status)\n");
+ if (mddi_client_capability_request) {
+ pmhctl->rev_state =
+ MDDI_REV_CLIENT_CAP_ISSUED;
+ mddi_command = MDDI_CMD_GET_CLIENT_CAP;
+ mddi_client_capability_request = FALSE;
+ } else {
+ pmhctl->rev_state =
+ MDDI_REV_STATUS_REQ_ISSUED;
+ pmhctl->client_status_cnt = 0;
+ mddi_command =
+ MDDI_CMD_GET_CLIENT_STATUS;
+ }
+ }
+ }
+ if ((pmhctl->rev_state == MDDI_REV_ENCAP_ISSUED) ||
+ (pmhctl->rev_state == MDDI_REV_STATUS_REQ_ISSUED) ||
+ (pmhctl->rev_state == MDDI_REV_CLIENT_CAP_ISSUED)) {
+ pmhctl->int_type.rev_encap_count++;
+#if defined(T_MSM6280) && !defined(T_MSM7200)
+ mddi_rev_pointer_written = TRUE;
+ mddi_host_reg_out(REV_PTR, mddi_rev_ptr_write_val);
+ mddi_rev_ptr_curr = mddi_rev_ptr_start;
+ /* force new rev ptr command */
+ mddi_host_reg_out(CMD, 0xC00);
+#else
+ if (!pmhctl->rev_ptr_written) {
+ MDDI_MSG_DEBUG("writing reverse pointer!\n");
+ pmhctl->rev_ptr_written = TRUE;
+#if defined(CONFIG_FB_MSM_MDP31) || defined(CONFIG_FB_MSM_MDP40)
+ if ((pmhctl->rev_state ==
+ MDDI_REV_CLIENT_CAP_ISSUED) &&
+ (mddi_host_core_version == 0x28 ||
+ mddi_host_core_version == 0x30)) {
+ pmhctl->rev_ptr_written = FALSE;
+ mddi_host_reg_out(FIFO_ALLOC, 0x02);
+ } else
+ mddi_host_reg_out(REV_PTR,
+ pmhctl->
+ mddi_rev_ptr_write_val);
+#else
+ mddi_host_reg_out(REV_PTR,
+ pmhctl->
+ mddi_rev_ptr_write_val);
+#endif
+ }
+#endif
+ if (mddi_debug_clear_rev_data) {
+ uint16 i;
+ for (i = 0; i < MDDI_MAX_REV_DATA_SIZE / 4; i++)
+ pmhctl->rev_data_buf[i] = 0xdddddddd;
+ /* clean cache */
+ mddi_flush_cache_lines(pmhctl->rev_data_buf,
+ MDDI_MAX_REV_DATA_SIZE);
+ }
+
+ /* send reverse encapsulation to get needed data */
+ mddi_host_reg_out(CMD, mddi_command);
+ }
+ }
+
+}
+
+static void mddi_process_client_initiated_wakeup(void)
+{
+ mddi_host_type host_idx = mddi_curr_host;
+ mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+ /* Disable MDDI_INT Interrupt, we detect client initiated wakeup one
+ * time for each entry into hibernation */
+ mddi_host_reg_outm(INTEN, MDDI_INT_MDDI_IN, 0);
+
+ if (host_idx == MDDI_HOST_PRIM) {
+ if (mddi_vsync_detect_enabled) {
+ mddi_host_enable_io_clock();
+#ifndef MDDI_HOST_DISP_LISTEN
+ /* issue command to bring up link */
+ /* need to do this to clear the vsync condition */
+ if (pmhctl->link_state == MDDI_LINK_HIBERNATING) {
+ pmhctl->link_state = MDDI_LINK_ACTIVATING;
+ mddi_host_reg_out(CMD, MDDI_CMD_LINK_ACTIVE);
+ }
+#endif
+ /*
+ * Indicate to client specific code that vsync was
+ * enabled, and we did not detect a client initiated
+ * wakeup. The client specific handler can clear the
+ * condition if necessary to prevent subsequent
+ * client initiated wakeups.
+ */
+ mddi_client_lcd_vsync_detected(TRUE);
+ pmhctl->log_parms.vsync_response_cnt++;
+ MDDI_MSG_NOTICE("MDDI_INT_IN condition\n");
+
+ }
+ }
+
+ if (mddi_gpio.polling_enabled) {
+ mddi_host_enable_io_clock();
+ /* check interrupt status now */
+ (void)mddi_queue_register_read_int(mddi_gpio.polling_reg,
+ &mddi_gpio.polling_val);
+ }
+}
+#endif /* FEATURE_MDDI_DISABLE_REVERSE */
+
+static void mddi_host_isr(void)
+{
+ uint32 int_reg, int_en;
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+ uint32 status_reg;
+#endif
+ mddi_host_type host_idx = mddi_curr_host;
+ mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+ if (!MDDI_HOST_IS_HCLK_ON) {
+ MDDI_HOST_ENABLE_HCLK;
+ MDDI_MSG_DEBUG("HCLK disabled, but isr is firing\n");
+ }
+ int_reg = mddi_host_reg_in(INT);
+ int_en = mddi_host_reg_in(INTEN);
+ pmhctl->saved_int_reg = int_reg;
+ pmhctl->saved_int_en = int_en;
+ int_reg = int_reg & int_en;
+ pmhctl->int_type.count++;
+
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+ status_reg = mddi_host_reg_in(STAT);
+
+ if ((int_reg & MDDI_INT_MDDI_IN) ||
+ ((int_en & MDDI_INT_MDDI_IN) &&
+ ((int_reg == 0) || (status_reg & MDDI_STAT_CLIENT_WAKEUP_REQ)))) {
+ /*
+ * The MDDI_IN condition will clear itself, and so it is
+ * possible that MDDI_IN was the reason for the isr firing,
+ * even though the interrupt register does not have the
+ * MDDI_IN bit set. To check if this was the case we need to
+ * look at the status register bit that signifies a client
+ * initiated wakeup. If the status register bit is set, as well
+ * as the MDDI_IN interrupt enabled, then we treat this as a
+ * client initiated wakeup.
+ */
+ if (int_reg & MDDI_INT_MDDI_IN)
+ pmhctl->int_type.in_count++;
+ mddi_process_client_initiated_wakeup();
+ }
+#endif
+
+ if (int_reg & MDDI_INT_LINK_STATE_CHANGES) {
+ pmhctl->int_type.state_change_count++;
+ mddi_report_state_change(int_reg);
+ }
+
+ if (int_reg & MDDI_INT_PRI_LINK_LIST_DONE) {
+ pmhctl->int_type.ll_done_count++;
+ mddi_process_link_list_done();
+ }
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+ if (int_reg & MDDI_INT_REV_DATA_AVAIL) {
+ pmhctl->int_type.rev_avail_count++;
+ mddi_process_rev_packets();
+ }
+#endif
+
+ if (int_reg & MDDI_INT_ERROR_CONDITIONS) {
+ pmhctl->int_type.error_count++;
+ mddi_report_errors(int_reg);
+
+ mddi_host_reg_out(INT, int_reg & MDDI_INT_ERROR_CONDITIONS);
+ }
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+ mddi_issue_reverse_encapsulation();
+
+ if ((pmhctl->rev_state != MDDI_REV_ENCAP_ISSUED) &&
+ (pmhctl->rev_state != MDDI_REV_STATUS_REQ_ISSUED))
+#endif
+ /* don't want simultaneous reverse and forward with Eagle */
+ mddi_queue_forward_linked_list();
+
+ if (int_reg & MDDI_INT_NO_CMD_PKTS_PEND) {
+ /* this interrupt is used to kick the isr when hibernation is disabled */
+ mddi_host_reg_outm(INTEN, MDDI_INT_NO_CMD_PKTS_PEND, 0);
+ }
+
+ if ((!mddi_host_mdp_active_flag) &&
+ (!mddi_vsync_detect_enabled) &&
+ (pmhctl->llist_info.transmitting_start_idx == UNASSIGNED_INDEX) &&
+ (pmhctl->llist_info.waiting_start_idx == UNASSIGNED_INDEX) &&
+ (pmhctl->rev_state == MDDI_REV_IDLE)) {
+ if (pmhctl->link_state == MDDI_LINK_HIBERNATING) {
+ mddi_host_disable_io_clock();
+ mddi_host_disable_hclk();
+ }
+#ifdef FEATURE_MDDI_HOST_ENABLE_EARLY_HIBERNATION
+ else if ((pmhctl->link_state == MDDI_LINK_ACTIVE) &&
+ (!pmhctl->disable_hibernation)) {
+ mddi_host_reg_out(CMD, MDDI_CMD_POWERDOWN);
+ }
+#endif
+ }
+}
+
+static void mddi_host_isr_primary(void)
+{
+ mddi_curr_host = MDDI_HOST_PRIM;
+ mddi_host_isr();
+}
+
+irqreturn_t mddi_pmdh_isr_proxy(int irq, void *ptr)
+{
+ mddi_host_isr_primary();
+ return IRQ_HANDLED;
+}
+
+static void mddi_host_isr_external(void)
+{
+ mddi_curr_host = MDDI_HOST_EXT;
+ mddi_host_isr();
+ mddi_curr_host = MDDI_HOST_PRIM;
+}
+
+irqreturn_t mddi_emdh_isr_proxy(int irq, void *ptr)
+{
+ mddi_host_isr_external();
+ return IRQ_HANDLED;
+}
+
+static void mddi_host_initialize_registers(mddi_host_type host_idx)
+{
+ uint32 pad_reg_val;
+ mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+ if (pmhctl->driver_state == MDDI_DRIVER_ENABLED)
+ return;
+
+ /* turn on HCLK to MDDI host core */
+ mddi_host_enable_hclk();
+
+ /* MDDI Reset command */
+ mddi_host_reg_out(CMD, MDDI_CMD_RESET);
+
+ /* Version register (= 0x01) */
+ mddi_host_reg_out(VERSION, 0x0001);
+
+ /* Bytes per subframe register */
+ mddi_host_reg_out(BPS, MDDI_HOST_BYTES_PER_SUBFRAME);
+
+ /* Subframes per media frames register (= 0x03) */
+ mddi_host_reg_out(SPM, 0x0003);
+
+ /* Turn Around 1 register (= 0x05) */
+ mddi_host_reg_out(TA1_LEN, 0x0005);
+
+ /* Turn Around 2 register (= 0x0C) */
+ mddi_host_reg_out(TA2_LEN, MDDI_HOST_TA2_LEN);
+
+ /* Drive hi register (= 0x96) */
+ mddi_host_reg_out(DRIVE_HI, 0x0096);
+
+ /* Drive lo register (= 0x32) */
+ mddi_host_reg_out(DRIVE_LO, 0x0032);
+
+ /* Display wakeup count register (= 0x3c) */
+ mddi_host_reg_out(DISP_WAKE, 0x003c);
+
+ /* Reverse Rate Divisor register (= 0x2) */
+ mddi_host_reg_out(REV_RATE_DIV, MDDI_HOST_REV_RATE_DIV);
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+ /* Reverse Pointer Size */
+ mddi_host_reg_out(REV_SIZE, MDDI_REV_BUFFER_SIZE);
+
+ /* Rev Encap Size */
+ mddi_host_reg_out(REV_ENCAP_SZ, pmhctl->rev_pkt_size);
+#endif
+
+ /* Periodic Rev Encap */
+ /* don't send periodically */
+ mddi_host_reg_out(CMD, MDDI_CMD_PERIODIC_REV_ENCAP);
+
+ pad_reg_val = mddi_host_reg_in(PAD_CTL);
+ if (pad_reg_val == 0) {
+ /* If we are turning on band gap, need to wait 5us before turning
+ * on the rest of the PAD */
+ mddi_host_reg_out(PAD_CTL, 0x08000);
+ udelay(5);
+ }
+#ifdef T_MSM7200
+ /* Recommendation from PAD hw team */
+ mddi_host_reg_out(PAD_CTL, 0xa850a);
+#else
+ /* Recommendation from PAD hw team */
+ mddi_host_reg_out(PAD_CTL, 0xa850f);
+#endif
+
+#if defined(CONFIG_FB_MSM_MDP31) || defined(CONFIG_FB_MSM_MDP40)
+ mddi_host_reg_out(PAD_IO_CTL, 0x00320000);
+ mddi_host_reg_out(PAD_CAL, 0x00220020);
+#endif
+
+ mddi_host_core_version = mddi_host_reg_inm(CORE_VER, 0xffff);
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+ if (mddi_host_core_version >= 8)
+ mddi_rev_ptr_workaround = FALSE;
+ pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+#endif
+
+ if ((mddi_host_core_version > 8) && (mddi_host_core_version < 0x19))
+ mddi_host_reg_out(TEST, 0x2);
+
+ /* Need an even number for counts */
+ mddi_host_reg_out(DRIVER_START_CNT, 0x60006);
+
+#ifndef T_MSM7500
+ /* Setup defaults for MDP related register */
+ mddi_host_reg_out(MDP_VID_FMT_DES, 0x5666);
+ mddi_host_reg_out(MDP_VID_PIX_ATTR, 0x00C3);
+ mddi_host_reg_out(MDP_VID_CLIENTID, 0);
+#endif
+
+ /* automatically hibernate after 1 empty subframe */
+ if (pmhctl->disable_hibernation)
+ mddi_host_reg_out(CMD, MDDI_CMD_HIBERNATE);
+ else
+ mddi_host_reg_out(CMD, MDDI_CMD_HIBERNATE | 1);
+
+ /* Bring up link if display (client) requests it */
+#ifdef MDDI_HOST_DISP_LISTEN
+ mddi_host_reg_out(CMD, MDDI_CMD_DISP_LISTEN);
+#else
+ mddi_host_reg_out(CMD, MDDI_CMD_DISP_IGNORE);
+#endif
+
+}
+
+void mddi_host_configure_interrupts(mddi_host_type host_idx, boolean enable)
+{
+ unsigned long flags;
+ mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+ spin_lock_irqsave(&mddi_host_spin_lock, flags);
+
+ /* turn on HCLK to MDDI host core if it has been disabled */
+ mddi_host_enable_hclk();
+ /* Clear MDDI Interrupt enable reg */
+ mddi_host_reg_out(INTEN, 0);
+
+ spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+ if (enable) {
+ pmhctl->driver_state = MDDI_DRIVER_ENABLED;
+
+ if (host_idx == MDDI_HOST_PRIM) {
+ if (request_irq
+ (INT_MDDI_PRI, mddi_pmdh_isr_proxy, IRQF_DISABLED,
+ "PMDH", 0) != 0)
+ printk(KERN_ERR
+ "a mddi: unable to request_irq\n");
+ else
+ int_mddi_pri_flag = TRUE;
+ } else {
+ if (request_irq
+ (INT_MDDI_EXT, mddi_emdh_isr_proxy, IRQF_DISABLED,
+ "EMDH", 0) != 0)
+ printk(KERN_ERR
+ "b mddi: unable to request_irq\n");
+ else
+ int_mddi_ext_flag = TRUE;
+ }
+
+ /* Set MDDI Interrupt enable reg -- Enable Reverse data avail */
+#ifdef FEATURE_MDDI_DISABLE_REVERSE
+ mddi_host_reg_out(INTEN,
+ MDDI_INT_ERROR_CONDITIONS |
+ MDDI_INT_LINK_STATE_CHANGES);
+#else
+ /* Reverse Pointer register */
+ pmhctl->rev_ptr_written = FALSE;
+
+ mddi_host_reg_out(INTEN,
+ MDDI_INT_REV_DATA_AVAIL |
+ MDDI_INT_ERROR_CONDITIONS |
+ MDDI_INT_LINK_STATE_CHANGES);
+ pmhctl->rtd_counter = mddi_rtd_frequency;
+ pmhctl->client_status_cnt = 0;
+#endif
+ } else {
+ if (pmhctl->driver_state == MDDI_DRIVER_ENABLED)
+ pmhctl->driver_state = MDDI_DRIVER_DISABLED;
+ }
+
+}
+
+static void mddi_host_powerup(mddi_host_type host_idx)
+{
+ mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+ if (pmhctl->link_state != MDDI_LINK_DISABLED)
+ return;
+
+ /* enable IO_CLK and hclk to MDDI host core */
+ mddi_host_enable_io_clock();
+
+ mddi_host_initialize_registers(host_idx);
+ mddi_host_configure_interrupts(host_idx, TRUE);
+
+ pmhctl->link_state = MDDI_LINK_ACTIVATING;
+
+ /* Link activate command */
+ mddi_host_reg_out(CMD, MDDI_CMD_LINK_ACTIVE);
+
+#ifdef CLKRGM_MDDI_IO_CLOCK_IN_MHZ
+ MDDI_MSG_NOTICE("MDDI Host: Activating Link %d Mbps\n",
+ CLKRGM_MDDI_IO_CLOCK_IN_MHZ * 2);
+#else
+ MDDI_MSG_NOTICE("MDDI Host: Activating Link\n");
+#endif
+
+ /* Initialize the timer */
+ if (host_idx == MDDI_HOST_PRIM)
+ mddi_host_timer_service(0);
+}
+
+void mddi_host_init(mddi_host_type host_idx)
+/* Write out the MDDI configuration registers */
+{
+ static boolean initialized = FALSE;
+ mddi_host_cntl_type *pmhctl;
+
+ if (host_idx >= MDDI_NUM_HOST_CORES) {
+ MDDI_MSG_ERR("Invalid host core index\n");
+ return;
+ }
+
+ if (!initialized) {
+ uint16 idx;
+ mddi_host_type host;
+ for (host = MDDI_HOST_PRIM; host < MDDI_NUM_HOST_CORES; host++) {
+ pmhctl = &(mhctl[host]);
+ initialized = TRUE;
+
+ pmhctl->llist_ptr =
+ dma_alloc_coherent(NULL, MDDI_LLIST_POOL_SIZE,
+ &(pmhctl->llist_dma_addr),
+ GFP_KERNEL);
+ pmhctl->llist_dma_ptr =
+ (mddi_linked_list_type *) (void *)pmhctl->
+ llist_dma_addr;
+#ifdef FEATURE_MDDI_DISABLE_REVERSE
+ pmhctl->rev_data_buf = NULL;
+ if (pmhctl->llist_ptr == NULL)
+#else
+ mddi_rev_user.waiting = FALSE;
+ init_completion(&(mddi_rev_user.done_comp));
+ pmhctl->rev_data_buf =
+ dma_alloc_coherent(NULL, MDDI_MAX_REV_DATA_SIZE,
+ &(pmhctl->rev_data_dma_addr),
+ GFP_KERNEL);
+ if ((pmhctl->llist_ptr == NULL)
+ || (pmhctl->rev_data_buf == NULL))
+#endif
+ {
+ MDDI_MSG_CRIT
+ ("unable to alloc non-cached memory\n");
+ }
+ llist_extern[host] = pmhctl->llist_ptr;
+ llist_dma_extern[host] = pmhctl->llist_dma_ptr;
+ llist_extern_notify[host] = pmhctl->llist_notify;
+
+ for (idx = 0; idx < UNASSIGNED_INDEX; idx++) {
+ init_completion(&
+ (pmhctl->llist_notify[idx].
+ done_comp));
+ }
+ init_completion(&(pmhctl->mddi_llist_avail_comp));
+ spin_lock_init(&mddi_host_spin_lock);
+ pmhctl->mddi_waiting_for_llist_avail = FALSE;
+ pmhctl->mddi_rev_ptr_write_val =
+ (uint32) (void *)(pmhctl->rev_data_dma_addr);
+ pmhctl->rev_ptr_start = (void *)pmhctl->rev_data_buf;
+
+ pmhctl->rev_pkt_size = MDDI_DEFAULT_REV_PKT_SIZE;
+ pmhctl->rev_state = MDDI_REV_IDLE;
+#ifdef IMAGE_MODEM_PROC
+ /* assume hibernation state is last state from APPS proc, so that
+ * we don't reinitialize the host core */
+ pmhctl->link_state = MDDI_LINK_HIBERNATING;
+#else
+ pmhctl->link_state = MDDI_LINK_DISABLED;
+#endif
+ pmhctl->driver_state = MDDI_DRIVER_DISABLED;
+ pmhctl->disable_hibernation = FALSE;
+
+ /* initialize llist variables */
+ pmhctl->llist_info.transmitting_start_idx =
+ UNASSIGNED_INDEX;
+ pmhctl->llist_info.transmitting_end_idx =
+ UNASSIGNED_INDEX;
+ pmhctl->llist_info.waiting_start_idx = UNASSIGNED_INDEX;
+ pmhctl->llist_info.waiting_end_idx = UNASSIGNED_INDEX;
+ pmhctl->llist_info.reg_read_idx = UNASSIGNED_INDEX;
+ pmhctl->llist_info.next_free_idx =
+ MDDI_FIRST_DYNAMIC_LLIST_IDX;
+ pmhctl->llist_info.reg_read_waiting = FALSE;
+
+ mddi_vsync_detect_enabled = FALSE;
+ mddi_gpio.polling_enabled = FALSE;
+
+ pmhctl->int_type.count = 0;
+ pmhctl->int_type.in_count = 0;
+ pmhctl->int_type.disp_req_count = 0;
+ pmhctl->int_type.state_change_count = 0;
+ pmhctl->int_type.ll_done_count = 0;
+ pmhctl->int_type.rev_avail_count = 0;
+ pmhctl->int_type.error_count = 0;
+ pmhctl->int_type.rev_encap_count = 0;
+ pmhctl->int_type.llist_ptr_write_1 = 0;
+ pmhctl->int_type.llist_ptr_write_2 = 0;
+
+ pmhctl->stats.fwd_crc_count = 0;
+ pmhctl->stats.rev_crc_count = 0;
+ pmhctl->stats.pri_underflow = 0;
+ pmhctl->stats.sec_underflow = 0;
+ pmhctl->stats.rev_overflow = 0;
+ pmhctl->stats.pri_overwrite = 0;
+ pmhctl->stats.sec_overwrite = 0;
+ pmhctl->stats.rev_overwrite = 0;
+ pmhctl->stats.dma_failure = 0;
+ pmhctl->stats.rtd_failure = 0;
+ pmhctl->stats.reg_read_failure = 0;
+#ifdef FEATURE_MDDI_UNDERRUN_RECOVERY
+ pmhctl->stats.pri_underrun_detected = 0;
+#endif
+
+ pmhctl->log_parms.rtd_cnt = 0;
+ pmhctl->log_parms.rev_enc_cnt = 0;
+ pmhctl->log_parms.vid_cnt = 0;
+ pmhctl->log_parms.reg_acc_cnt = 0;
+ pmhctl->log_parms.cli_stat_cnt = 0;
+ pmhctl->log_parms.cli_cap_cnt = 0;
+ pmhctl->log_parms.reg_read_cnt = 0;
+ pmhctl->log_parms.link_active_cnt = 0;
+ pmhctl->log_parms.link_hibernate_cnt = 0;
+ pmhctl->log_parms.fwd_crc_cnt = 0;
+ pmhctl->log_parms.rev_crc_cnt = 0;
+ pmhctl->log_parms.vsync_response_cnt = 0;
+
+ prev_parms[host_idx] = pmhctl->log_parms;
+ mddi_client_capability_pkt.packet_length = 0;
+ }
+
+#ifndef T_MSM7500
+ /* tell clock driver we are user of this PLL */
+ MDDI_HOST_ENABLE_IO_CLOCK;
+#endif
+ }
+
+ mddi_host_powerup(host_idx);
+ pmhctl = &(mhctl[host_idx]);
+}
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+static uint32 mddi_client_id;
+
+uint32 mddi_get_client_id(void)
+{
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+ mddi_host_type host_idx = MDDI_HOST_PRIM;
+ static boolean client_detection_try = FALSE;
+ mddi_host_cntl_type *pmhctl;
+ unsigned long flags;
+ uint16 saved_rev_pkt_size;
+
+ if (!client_detection_try) {
+ /* Toshiba display requires larger drive_lo value */
+ mddi_host_reg_out(DRIVE_LO, 0x0050);
+
+ pmhctl = &(mhctl[MDDI_HOST_PRIM]);
+
+ saved_rev_pkt_size = pmhctl->rev_pkt_size;
+
+ /* Increase Rev Encap Size */
+ pmhctl->rev_pkt_size = MDDI_CLIENT_CAPABILITY_REV_PKT_SIZE;
+ mddi_host_reg_out(REV_ENCAP_SZ, pmhctl->rev_pkt_size);
+
+ /* disable hibernation temporarily */
+ if (!pmhctl->disable_hibernation)
+ mddi_host_reg_out(CMD, MDDI_CMD_HIBERNATE);
+
+ mddi_rev_user.waiting = TRUE;
+ INIT_COMPLETION(mddi_rev_user.done_comp);
+
+ spin_lock_irqsave(&mddi_host_spin_lock, flags);
+
+ /* turn on clock(s), if they have been disabled */
+ mddi_host_enable_hclk();
+ mddi_host_enable_io_clock();
+
+ mddi_client_capability_request = TRUE;
+
+ if (pmhctl->rev_state == MDDI_REV_IDLE) {
+ /* attempt to send the reverse encapsulation now */
+ mddi_issue_reverse_encapsulation();
+ }
+ spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+ wait_for_completion_killable(&(mddi_rev_user.done_comp));
+
+ /* Set Rev Encap Size back to its original value */
+ pmhctl->rev_pkt_size = saved_rev_pkt_size;
+ mddi_host_reg_out(REV_ENCAP_SZ, pmhctl->rev_pkt_size);
+
+ /* reenable auto-hibernate */
+ if (!pmhctl->disable_hibernation)
+ mddi_host_reg_out(CMD, MDDI_CMD_HIBERNATE | 1);
+
+ mddi_host_reg_out(DRIVE_LO, 0x0032);
+ client_detection_try = TRUE;
+
+ mddi_client_id = (mddi_client_capability_pkt.Mfr_Name<<16) |
+ mddi_client_capability_pkt.Product_Code;
+
+ if (!mddi_client_id)
+ mddi_disable(1);
+ }
+
+#if 0
+ switch (mddi_client_capability_pkt.Mfr_Name) {
+ case 0x4474:
+ if ((mddi_client_capability_pkt.Product_Code != 0x8960) &&
+ (target == DISPLAY_1)) {
+ ret = PRISM_WVGA;
+ }
+ break;
+
+ case 0xD263:
+ if (target == DISPLAY_1)
+ ret = TOSHIBA_VGA_PRIM;
+ else if (target == DISPLAY_2)
+ ret = TOSHIBA_QCIF_SECD;
+ break;
+
+ case 0:
+ if (mddi_client_capability_pkt.Product_Code == 0x8835) {
+ if (target == DISPLAY_1)
+ ret = SHARP_QVGA_PRIM;
+ else if (target == DISPLAY_2)
+ ret = SHARP_128x128_SECD;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ if ((!client_detection_try) && (ret != TOSHIBA_VGA_PRIM)
+ && (ret != TOSHIBA_QCIF_SECD)) {
+ /* Not a Toshiba display, so change drive_lo back to default value */
+ mddi_host_reg_out(DRIVE_LO, 0x0032);
+ }
+#endif
+
+#endif
+
+ return mddi_client_id;
+}
+#endif
+
+void mddi_host_powerdown(mddi_host_type host_idx)
+{
+ mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+ if (host_idx >= MDDI_NUM_HOST_CORES) {
+ MDDI_MSG_ERR("Invalid host core index\n");
+ return;
+ }
+
+ if (pmhctl->driver_state == MDDI_DRIVER_RESET) {
+ return;
+ }
+
+ if (host_idx == MDDI_HOST_PRIM) {
+ /* disable timer */
+ del_timer(&mddi_host_timer);
+ }
+
+ mddi_host_configure_interrupts(host_idx, FALSE);
+
+ /* turn on HCLK to MDDI host core if it has been disabled */
+ mddi_host_enable_hclk();
+
+ /* MDDI Reset command */
+ mddi_host_reg_out(CMD, MDDI_CMD_RESET);
+
+ /* Pad Control Register */
+ mddi_host_reg_out(PAD_CTL, 0x0);
+
+ /* disable IO_CLK and hclk to MDDI host core */
+ mddi_host_disable_io_clock();
+ mddi_host_disable_hclk();
+
+ pmhctl->link_state = MDDI_LINK_DISABLED;
+ pmhctl->driver_state = MDDI_DRIVER_RESET;
+
+ MDDI_MSG_NOTICE("MDDI Host: Disabling Link\n");
+
+}
+
+uint16 mddi_get_next_free_llist_item(mddi_host_type host_idx, boolean wait)
+{
+ unsigned long flags;
+ uint16 ret_idx;
+ boolean forced_wait = FALSE;
+ mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+ ret_idx = pmhctl->llist_info.next_free_idx;
+
+ pmhctl->llist_info.next_free_idx++;
+ if (pmhctl->llist_info.next_free_idx >= MDDI_NUM_DYNAMIC_LLIST_ITEMS)
+ pmhctl->llist_info.next_free_idx = MDDI_FIRST_DYNAMIC_LLIST_IDX;
+ spin_lock_irqsave(&mddi_host_spin_lock, flags);
+ if (pmhctl->llist_notify[ret_idx].in_use) {
+ if (!wait) {
+ pmhctl->llist_info.next_free_idx = ret_idx;
+ ret_idx = UNASSIGNED_INDEX;
+ } else {
+ forced_wait = TRUE;
+ INIT_COMPLETION(pmhctl->mddi_llist_avail_comp);
+ }
+ }
+ spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+ if (forced_wait) {
+ wait_for_completion_killable(&
+ (pmhctl->
+ mddi_llist_avail_comp));
+ MDDI_MSG_ERR("task waiting on mddi llist item\n");
+ }
+
+ if (ret_idx != UNASSIGNED_INDEX) {
+ pmhctl->llist_notify[ret_idx].waiting = FALSE;
+ pmhctl->llist_notify[ret_idx].done_cb = NULL;
+ pmhctl->llist_notify[ret_idx].in_use = TRUE;
+ pmhctl->llist_notify[ret_idx].next_idx = UNASSIGNED_INDEX;
+ }
+
+ return ret_idx;
+}
+
+uint16 mddi_get_reg_read_llist_item(mddi_host_type host_idx, boolean wait)
+{
+#ifdef FEATURE_MDDI_DISABLE_REVERSE
+ MDDI_MSG_CRIT("No reverse link available\n");
+ (void)wait;
+ return FALSE;
+#else
+ unsigned long flags;
+ uint16 ret_idx;
+ boolean error = FALSE;
+ mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+ spin_lock_irqsave(&mddi_host_spin_lock, flags);
+ if (pmhctl->llist_info.reg_read_idx != UNASSIGNED_INDEX) {
+ /* need to block here or is this an error condition? */
+ error = TRUE;
+ ret_idx = UNASSIGNED_INDEX;
+ }
+ spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+ if (!error) {
+ ret_idx = pmhctl->llist_info.reg_read_idx =
+ mddi_get_next_free_llist_item(host_idx, wait);
+ /* clear the reg_read_waiting flag */
+ pmhctl->llist_info.reg_read_waiting = FALSE;
+ }
+
+ if (error)
+ MDDI_MSG_ERR("***** Reg read still in progress! ****\n");
+ return ret_idx;
+#endif
+
+}
+
+void mddi_queue_forward_packets(uint16 first_llist_idx,
+ uint16 last_llist_idx,
+ boolean wait,
+ mddi_llist_done_cb_type llist_done_cb,
+ mddi_host_type host_idx)
+{
+ unsigned long flags;
+ mddi_linked_list_type *llist;
+ mddi_linked_list_type *llist_dma;
+ mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+ if ((first_llist_idx >= UNASSIGNED_INDEX) ||
+ (last_llist_idx >= UNASSIGNED_INDEX)) {
+ MDDI_MSG_ERR("MDDI queueing invalid linked list\n");
+ return;
+ }
+
+ if (pmhctl->link_state == MDDI_LINK_DISABLED)
+ MDDI_MSG_CRIT("MDDI host powered down!\n");
+
+ llist = pmhctl->llist_ptr;
+ llist_dma = pmhctl->llist_dma_ptr;
+
+ /* clean cache so MDDI host can read data */
+ memory_barrier();
+
+ pmhctl->llist_notify[last_llist_idx].waiting = wait;
+ if (wait)
+ INIT_COMPLETION(pmhctl->llist_notify[last_llist_idx].done_comp);
+ pmhctl->llist_notify[last_llist_idx].done_cb = llist_done_cb;
+
+ spin_lock_irqsave(&mddi_host_spin_lock, flags);
+
+ if ((pmhctl->llist_info.transmitting_start_idx == UNASSIGNED_INDEX) &&
+ (pmhctl->llist_info.waiting_start_idx == UNASSIGNED_INDEX) &&
+ (pmhctl->rev_state == MDDI_REV_IDLE)) {
+ /* no packets are currently transmitting */
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+ if (first_llist_idx == pmhctl->llist_info.reg_read_idx) {
+ /* This is the special case where the packet is a register read. */
+ pmhctl->rev_state = MDDI_REV_REG_READ_ISSUED;
+ mddi_reg_read_retry = 0;
+ /* mddi_rev_reg_read_attempt = 1; */
+ }
+#endif
+ /* assign transmitting index values */
+ pmhctl->llist_info.transmitting_start_idx = first_llist_idx;
+ pmhctl->llist_info.transmitting_end_idx = last_llist_idx;
+
+ /* turn on clock(s), if they have been disabled */
+ mddi_host_enable_hclk();
+ mddi_host_enable_io_clock();
+ pmhctl->int_type.llist_ptr_write_1++;
+ /* Write to primary pointer register */
+ dma_coherent_pre_ops();
+ mddi_host_reg_out(PRI_PTR, &llist_dma[first_llist_idx]);
+
+ /* enable interrupt when complete */
+ mddi_host_reg_outm(INTEN, MDDI_INT_PRI_LINK_LIST_DONE,
+ MDDI_INT_PRI_LINK_LIST_DONE);
+
+ } else if (pmhctl->llist_info.waiting_start_idx == UNASSIGNED_INDEX) {
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+ if (first_llist_idx == pmhctl->llist_info.reg_read_idx) {
+ /*
+ * we have a register read to send but need to wait
+ * for current reverse activity to end or there are
+ * packets currently transmitting
+ */
+ /* mddi_rev_reg_read_attempt = 0; */
+ pmhctl->llist_info.reg_read_waiting = TRUE;
+ }
+#endif
+
+ /* assign waiting index values */
+ pmhctl->llist_info.waiting_start_idx = first_llist_idx;
+ pmhctl->llist_info.waiting_end_idx = last_llist_idx;
+ } else {
+ uint16 prev_end_idx = pmhctl->llist_info.waiting_end_idx;
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+ if (first_llist_idx == pmhctl->llist_info.reg_read_idx) {
+ /*
+ * we have a register read to send but need to wait
+ * for current reverse activity to end or there are
+ * packets currently transmitting
+ */
+ /* mddi_rev_reg_read_attempt = 0; */
+ pmhctl->llist_info.reg_read_waiting = TRUE;
+ }
+#endif
+
+ llist = pmhctl->llist_ptr;
+
+ /* clear end flag in previous last packet */
+ llist[prev_end_idx].link_controller_flags = 0;
+ pmhctl->llist_notify[prev_end_idx].next_idx = first_llist_idx;
+
+ /* set the next_packet_pointer of the previous last packet */
+ llist[prev_end_idx].next_packet_pointer =
+ (void *)(&llist_dma[first_llist_idx]);
+
+ /* clean cache so MDDI host can read data */
+ memory_barrier();
+
+ /* assign new waiting last index value */
+ pmhctl->llist_info.waiting_end_idx = last_llist_idx;
+ }
+
+ spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+}
+
+void mddi_host_write_pix_attr_reg(uint32 value)
+{
+ (void)value;
+}
+
+void mddi_queue_reverse_encapsulation(boolean wait)
+{
+#ifdef FEATURE_MDDI_DISABLE_REVERSE
+ MDDI_MSG_CRIT("No reverse link available\n");
+ (void)wait;
+#else
+ unsigned long flags;
+ boolean error = FALSE;
+ mddi_host_type host_idx = MDDI_HOST_PRIM;
+ mddi_host_cntl_type *pmhctl = &(mhctl[MDDI_HOST_PRIM]);
+
+ spin_lock_irqsave(&mddi_host_spin_lock, flags);
+
+ /* turn on clock(s), if they have been disabled */
+ mddi_host_enable_hclk();
+ mddi_host_enable_io_clock();
+
+ if (wait) {
+ if (!mddi_rev_user.waiting) {
+ mddi_rev_user.waiting = TRUE;
+ INIT_COMPLETION(mddi_rev_user.done_comp);
+ } else
+ error = TRUE;
+ }
+ mddi_rev_encap_user_request = TRUE;
+
+ if (pmhctl->rev_state == MDDI_REV_IDLE) {
+ /* attempt to send the reverse encapsulation now */
+ mddi_host_type orig_host_idx = mddi_curr_host;
+ mddi_curr_host = host_idx;
+ mddi_issue_reverse_encapsulation();
+ mddi_curr_host = orig_host_idx;
+ }
+ spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+ if (error) {
+ MDDI_MSG_ERR("Reverse Encap request already in progress\n");
+ } else if (wait)
+ wait_for_completion_killable(&(mddi_rev_user.done_comp));
+#endif
+}
+
+/* ISR to be executed */
+boolean mddi_set_rev_handler(mddi_rev_handler_type handler, uint16 pkt_type)
+{
+#ifdef FEATURE_MDDI_DISABLE_REVERSE
+ MDDI_MSG_CRIT("No reverse link available\n");
+ (void)handler;
+ (void)pkt_type;
+ return (FALSE);
+#else
+ unsigned long flags;
+ uint16 hdlr;
+ boolean handler_set = FALSE;
+ boolean overwrite = FALSE;
+ mddi_host_type host_idx = MDDI_HOST_PRIM;
+ mddi_host_cntl_type *pmhctl = &(mhctl[MDDI_HOST_PRIM]);
+
+ /* Disable interrupts */
+ spin_lock_irqsave(&mddi_host_spin_lock, flags);
+
+ for (hdlr = 0; hdlr < MAX_MDDI_REV_HANDLERS; hdlr++) {
+ if (mddi_rev_pkt_handler[hdlr].pkt_type == pkt_type) {
+ mddi_rev_pkt_handler[hdlr].handler = handler;
+ if (handler == NULL) {
+ /* clearing handler from table */
+ mddi_rev_pkt_handler[hdlr].pkt_type =
+ INVALID_PKT_TYPE;
+ handler_set = TRUE;
+ if (pkt_type == 0x10) { /* video stream packet */
+ /* ensure HCLK on to MDDI host core before register write */
+ mddi_host_enable_hclk();
+ /* No longer getting video, so reset rev encap size to default */
+ pmhctl->rev_pkt_size =
+ MDDI_DEFAULT_REV_PKT_SIZE;
+ mddi_host_reg_out(REV_ENCAP_SZ,
+ pmhctl->rev_pkt_size);
+ }
+ } else {
+ /* already a handler for this packet */
+ overwrite = TRUE;
+ }
+ break;
+ }
+ }
+ if ((hdlr >= MAX_MDDI_REV_HANDLERS) && (handler != NULL)) {
+ /* assigning new handler */
+ for (hdlr = 0; hdlr < MAX_MDDI_REV_HANDLERS; hdlr++) {
+ if (mddi_rev_pkt_handler[hdlr].pkt_type ==
+ INVALID_PKT_TYPE) {
+ if ((pkt_type == 0x10) && /* video stream packet */
+ (pmhctl->rev_pkt_size <
+ MDDI_VIDEO_REV_PKT_SIZE)) {
+ /* ensure HCLK on to MDDI host core before register write */
+ mddi_host_enable_hclk();
+ /* Increase Rev Encap Size */
+ pmhctl->rev_pkt_size =
+ MDDI_VIDEO_REV_PKT_SIZE;
+ mddi_host_reg_out(REV_ENCAP_SZ,
+ pmhctl->rev_pkt_size);
+ }
+ mddi_rev_pkt_handler[hdlr].handler = handler;
+ mddi_rev_pkt_handler[hdlr].pkt_type = pkt_type;
+ handler_set = TRUE;
+ break;
+ }
+ }
+ }
+
+ /* Restore interrupts */
+ spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+ if (overwrite)
+ MDDI_MSG_ERR("Overwriting previous rev packet handler\n");
+
+ return handler_set;
+
+#endif
+} /* mddi_set_rev_handler */
+
+void mddi_host_disable_hibernation(boolean disable)
+{
+ mddi_host_type host_idx = MDDI_HOST_PRIM;
+ mddi_host_cntl_type *pmhctl = &(mhctl[MDDI_HOST_PRIM]);
+
+ if (disable) {
+ pmhctl->disable_hibernation = TRUE;
+ /* hibernation will be turned off by isr next time it is entered */
+ } else {
+ if (pmhctl->disable_hibernation) {
+ unsigned long flags;
+ spin_lock_irqsave(&mddi_host_spin_lock, flags);
+ if (!MDDI_HOST_IS_HCLK_ON)
+ MDDI_HOST_ENABLE_HCLK;
+ mddi_host_reg_out(CMD, MDDI_CMD_HIBERNATE | 1);
+ spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+ pmhctl->disable_hibernation = FALSE;
+ }
+ }
+}
+
+void mddi_mhctl_remove(mddi_host_type host_idx)
+{
+ mddi_host_cntl_type *pmhctl;
+
+ pmhctl = &(mhctl[host_idx]);
+
+ dma_free_coherent(NULL, MDDI_LLIST_POOL_SIZE, (void *)pmhctl->llist_ptr,
+ pmhctl->llist_dma_addr);
+
+ dma_free_coherent(NULL, MDDI_MAX_REV_DATA_SIZE,
+ (void *)pmhctl->rev_data_buf,
+ pmhctl->rev_data_dma_addr);
+}
diff --git a/drivers/staging/msm/mddihosti.h b/drivers/staging/msm/mddihosti.h
new file mode 100644
index 0000000..7b26a42
--- /dev/null
+++ b/drivers/staging/msm/mddihosti.h
@@ -0,0 +1,547 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Code Aurora nor
+ * the names of its contributors may be used to endorse or promote
+ * products derived from this software without specific prior written
+ * permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MDDIHOSTI_H
+#define MDDIHOSTI_H
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include <linux/clk.h>
+
+/* Register offsets in MDDI, applies to both msm_pmdh_base and
+ * (u32)msm_emdh_base. */
+#define MDDI_CMD 0x0000
+#define MDDI_VERSION 0x0004
+#define MDDI_PRI_PTR 0x0008
+#define MDDI_BPS 0x0010
+#define MDDI_SPM 0x0014
+#define MDDI_INT 0x0018
+#define MDDI_INTEN 0x001c
+#define MDDI_REV_PTR 0x0020
+#define MDDI_REV_SIZE 0x0024
+#define MDDI_STAT 0x0028
+#define MDDI_REV_RATE_DIV 0x002c
+#define MDDI_REV_CRC_ERR 0x0030
+#define MDDI_TA1_LEN 0x0034
+#define MDDI_TA2_LEN 0x0038
+#define MDDI_TEST 0x0040
+#define MDDI_REV_PKT_CNT 0x0044
+#define MDDI_DRIVE_HI 0x0048
+#define MDDI_DRIVE_LO 0x004c
+#define MDDI_DISP_WAKE 0x0050
+#define MDDI_REV_ENCAP_SZ 0x0054
+#define MDDI_RTD_VAL 0x0058
+#define MDDI_PAD_CTL 0x0068
+#define MDDI_DRIVER_START_CNT 0x006c
+#define MDDI_CORE_VER 0x008c
+#define MDDI_FIFO_ALLOC 0x0090
+#define MDDI_PAD_IO_CTL 0x00a0
+#define MDDI_PAD_CAL 0x00a4
+
+extern u32 mddi_msg_level;
+
+/* No longer need to write to clear these registers */
+#define xxxx_mddi_host_reg_outm(reg, mask, val) \
+do { \
+ if (host_idx == MDDI_HOST_PRIM) \
+ mddi_host_reg_outm_pmdh(reg, mask, val); \
+ else \
+ mddi_host_reg_outm_emdh(reg, mask, val); \
+} while (0)
+
+#define mddi_host_reg_outm(reg, mask, val) \
+do { \
+ unsigned long __addr; \
+ if (host_idx == MDDI_HOST_PRIM) \
+ __addr = (u32)msm_pmdh_base + MDDI_##reg; \
+ else \
+ __addr = (u32)msm_emdh_base + MDDI_##reg; \
+ writel((readl(__addr) & ~(mask)) | ((val) & (mask)), __addr); \
+} while (0)
+
+#define xxxx_mddi_host_reg_out(reg, val) \
+do { \
+ if (host_idx == MDDI_HOST_PRIM) \
+ mddi_host_reg_out_pmdh(reg, val); \
+ else \
+ mddi_host_reg_out_emdh(reg, val); \
+ } while (0)
+
+#define mddi_host_reg_out(reg, val) \
+do { \
+ if (host_idx == MDDI_HOST_PRIM) \
+ writel(val, (u32)msm_pmdh_base + MDDI_##reg); \
+ else \
+ writel(val, (u32)msm_emdh_base + MDDI_##reg); \
+} while (0)
+
+#define xxxx_mddi_host_reg_in(reg) \
+ ((host_idx) ? \
+ mddi_host_reg_in_emdh(reg) : mddi_host_reg_in_pmdh(reg));
+
+#define mddi_host_reg_in(reg) \
+((host_idx) ? \
+ readl((u32)msm_emdh_base + MDDI_##reg) : \
+ readl((u32)msm_pmdh_base + MDDI_##reg)) \
+
+#define xxxx_mddi_host_reg_inm(reg, mask) \
+ ((host_idx) ? \
+ mddi_host_reg_inm_emdh(reg, mask) : \
+ mddi_host_reg_inm_pmdh(reg, mask);)
+
+#define mddi_host_reg_inm(reg, mask) \
+((host_idx) ? \
+ readl((u32)msm_emdh_base + MDDI_##reg) & (mask) : \
+ readl((u32)msm_pmdh_base + MDDI_##reg) & (mask)) \
+
+/* Using non-cacheable pmem, so do nothing */
+#define mddi_invalidate_cache_lines(addr_start, num_bytes)
+/*
+ * Using non-cacheable pmem, so do nothing with cache
+ * but, ensure write goes out to memory
+ */
+#define mddi_flush_cache_lines(addr_start, num_bytes) \
+ (void) addr_start; \
+ (void) num_bytes; \
+ memory_barrier()
+
+/* Since this translates to Remote Procedure Calls to check on clock status
+* just use a local variable to keep track of io_clock */
+#define MDDI_HOST_IS_IO_CLOCK_ON mddi_host_io_clock_on
+#define MDDI_HOST_ENABLE_IO_CLOCK
+#define MDDI_HOST_DISABLE_IO_CLOCK
+#define MDDI_HOST_IS_HCLK_ON mddi_host_hclk_on
+#define MDDI_HOST_ENABLE_HCLK
+#define MDDI_HOST_DISABLE_HCLK
+#define FEATURE_MDDI_HOST_IO_CLOCK_CONTROL_DISABLE
+#define FEATURE_MDDI_HOST_HCLK_CONTROL_DISABLE
+
+#define TRAMP_MDDI_HOST_ISR TRAMP_MDDI_PRI_ISR
+#define TRAMP_MDDI_HOST_EXT_ISR TRAMP_MDDI_EXT_ISR
+#define MDP_LINE_COUNT_BMSK 0x3ff
+#define MDP_SYNC_STATUS 0x000c
+#define MDP_LINE_COUNT \
+(readl(msm_mdp_base + MDP_SYNC_STATUS) & MDP_LINE_COUNT_BMSK)
+
+/* MDP sends 256 pixel packets, so lower value hibernates more without
+* significantly increasing latency of waiting for next subframe */
+#define MDDI_HOST_BYTES_PER_SUBFRAME 0x3C00
+
+#if defined(CONFIG_FB_MSM_MDP31) || defined(CONFIG_FB_MSM_MDP40)
+#define MDDI_HOST_TA2_LEN 0x001a
+#define MDDI_HOST_REV_RATE_DIV 0x0004
+#else
+#define MDDI_HOST_TA2_LEN 0x000c
+#define MDDI_HOST_REV_RATE_DIV 0x0002
+#endif
+
+#define MDDI_MSG_EMERG(msg, ...) \
+ if (mddi_msg_level > 0) \
+ printk(KERN_EMERG msg, ## __VA_ARGS__);
+#define MDDI_MSG_ALERT(msg, ...) \
+ if (mddi_msg_level > 1) \
+ printk(KERN_ALERT msg, ## __VA_ARGS__);
+#define MDDI_MSG_CRIT(msg, ...) \
+ if (mddi_msg_level > 2) \
+ printk(KERN_CRIT msg, ## __VA_ARGS__);
+#define MDDI_MSG_ERR(msg, ...) \
+ if (mddi_msg_level > 3) \
+ printk(KERN_ERR msg, ## __VA_ARGS__);
+#define MDDI_MSG_WARNING(msg, ...) \
+ if (mddi_msg_level > 4) \
+ printk(KERN_WARNING msg, ## __VA_ARGS__);
+#define MDDI_MSG_NOTICE(msg, ...) \
+ if (mddi_msg_level > 5) \
+ printk(KERN_NOTICE msg, ## __VA_ARGS__);
+#define MDDI_MSG_INFO(msg, ...) \
+ if (mddi_msg_level > 6) \
+ printk(KERN_INFO msg, ## __VA_ARGS__);
+#define MDDI_MSG_DEBUG(msg, ...) \
+ if (mddi_msg_level > 7) \
+ printk(KERN_DEBUG msg, ## __VA_ARGS__);
+
+#define GCC_PACKED __attribute__((packed))
+typedef struct GCC_PACKED {
+ uint16 packet_length;
+ /* total # of bytes in the packet not including
+ the packet_length field. */
+
+ uint16 packet_type;
+ /* A Packet Type of 70 identifies the packet as
+ a Client status Packet. */
+
+ uint16 bClient_ID;
+ /* This field is reserved for future use and shall
+ be set to zero. */
+
+} mddi_rev_packet_type;
+
+typedef struct GCC_PACKED {
+ uint16 packet_length;
+ /* total # of bytes in the packet not including
+ the packet_length field. */
+
+ uint16 packet_type;
+ /* A Packet Type of 70 identifies the packet as
+ a Client status Packet. */
+
+ uint16 bClient_ID;
+ /* This field is reserved for future use and shall
+ be set to zero. */
+
+ uint16 reverse_link_request;
+ /* 16 bit unsigned integer with number of bytes client
+ needs in the * reverse encapsulation message
+ to transmit data. */
+
+ uint8 crc_error_count;
+ uint8 capability_change;
+ uint16 graphics_busy_flags;
+
+ uint16 parameter_CRC;
+ /* 16-bit CRC of all the bytes in the packet
+ including Packet Length. */
+
+} mddi_client_status_type;
+
+typedef struct GCC_PACKED {
+ uint16 packet_length;
+ /* total # of bytes in the packet not including
+ the packet_length field. */
+
+ uint16 packet_type;
+ /* A Packet Type of 66 identifies the packet as
+ a Client Capability Packet. */
+
+ uint16 bClient_ID;
+ /* This field is reserved for future use and
+ shall be set to zero. */
+
+ uint16 Protocol_Version;
+ uint16 Minimum_Protocol_Version;
+ uint16 Data_Rate_Capability;
+ uint8 Interface_Type_Capability;
+ uint8 Number_of_Alt_Displays;
+ uint16 PostCal_Data_Rate;
+ uint16 Bitmap_Width;
+ uint16 Bitmap_Height;
+ uint16 Display_Window_Width;
+ uint16 Display_Window_Height;
+ uint32 Color_Map_Size;
+ uint16 Color_Map_RGB_Width;
+ uint16 RGB_Capability;
+ uint8 Monochrome_Capability;
+ uint8 Reserved_1;
+ uint16 Y_Cb_Cr_Capability;
+ uint16 Bayer_Capability;
+ uint16 Alpha_Cursor_Image_Planes;
+ uint32 Client_Feature_Capability_Indicators;
+ uint8 Maximum_Video_Frame_Rate_Capability;
+ uint8 Minimum_Video_Frame_Rate_Capability;
+ uint16 Minimum_Sub_frame_Rate;
+ uint16 Audio_Buffer_Depth;
+ uint16 Audio_Channel_Capability;
+ uint16 Audio_Sample_Rate_Capability;
+ uint8 Audio_Sample_Resolution;
+ uint8 Mic_Audio_Sample_Resolution;
+ uint16 Mic_Sample_Rate_Capability;
+ uint8 Keyboard_Data_Format;
+ uint8 pointing_device_data_format;
+ uint16 content_protection_type;
+ uint16 Mfr_Name;
+ uint16 Product_Code;
+ uint16 Reserved_3;
+ uint32 Serial_Number;
+ uint8 Week_of_Manufacture;
+ uint8 Year_of_Manufacture;
+
+ uint16 parameter_CRC;
+ /* 16-bit CRC of all the bytes in the packet including Packet Length. */
+
+} mddi_client_capability_type;
+
+typedef struct GCC_PACKED {
+ uint16 packet_length;
+ /* total # of bytes in the packet not including the packet_length field. */
+
+ uint16 packet_type;
+ /* A Packet Type of 16 identifies the packet as a Video Stream Packet. */
+
+ uint16 bClient_ID;
+ /* This field is reserved for future use and shall be set to zero. */
+
+ uint16 video_data_format_descriptor;
+ /* format of each pixel in the Pixel Data in the present stream in the
+ * present packet.
+ * If bits [15:13] = 000 monochrome
+ * If bits [15:13] = 001 color pixels (palette).
+ * If bits [15:13] = 010 color pixels in raw RGB
+ * If bits [15:13] = 011 data in 4:2:2 Y Cb Cr format
+ * If bits [15:13] = 100 Bayer pixels
+ */
+
+ uint16 pixel_data_attributes;
+ /* interpreted as follows:
+ * Bits [1:0] = 11 pixel data is displayed to both eyes
+ * Bits [1:0] = 10 pixel data is routed to the left eye only.
+ * Bits [1:0] = 01 pixel data is routed to the right eye only.
+ * Bits [1:0] = 00 pixel data is routed to the alternate display.
+ * Bit 2 is 0 Pixel Data is in the standard progressive format.
+ * Bit 2 is 1 Pixel Data is in interlace format.
+ * Bit 3 is 0 Pixel Data is in the standard progressive format.
+ * Bit 3 is 1 Pixel Data is in alternate pixel format.
+ * Bit 4 is 0 Pixel Data is to or from the display frame buffer.
+ * Bit 4 is 1 Pixel Data is to or from the camera.
+ * Bit 5 is 0 pixel data contains the next consecutive row of pixels.
+ * Bit 5 is 1 X Left Edge, Y Top Edge, X Right Edge, Y Bottom Edge,
+ * X Start, and Y Start parameters are not defined and
+ * shall be ignored by the client.
+ * Bits [7:6] = 01 Pixel data is written to the offline image buffer.
+ * Bits [7:6] = 00 Pixel data is written to the buffer to refresh display.
+ * Bits [7:6] = 11 Pixel data is written to all image buffers.
+ * Bits [7:6] = 10 Invalid. Reserved for future use.
+ * Bits 8 through 11 alternate display number.
+ * Bits 12 through 14 are reserved for future use and shall be set to zero.
+ * Bit 15 is 1 the row of pixels is the last row of pixels in a frame.
+ */
+
+ uint16 x_left_edge;
+ uint16 y_top_edge;
+ /* X,Y coordinate of the top left edge of the screen window */
+
+ uint16 x_right_edge;
+ uint16 y_bottom_edge;
+ /* X,Y coordinate of the bottom right edge of the window being updated. */
+
+ uint16 x_start;
+ uint16 y_start;
+ /* (X Start, Y Start) is the first pixel in the Pixel Data field below. */
+
+ uint16 pixel_count;
+ /* number of pixels in the Pixel Data field below. */
+
+ uint16 parameter_CRC;
+ /* 16-bit CRC of all bytes from the Packet Length to the Pixel Count. */
+
+ uint16 reserved;
+ /* 16-bit variable to make structure align on 4 byte boundary */
+
+} mddi_video_stream_packet_type;
+
+typedef struct GCC_PACKED {
+ uint16 packet_length;
+ /* total # of bytes in the packet not including the packet_length field. */
+
+ uint16 packet_type;
+ /* A Packet Type of 146 identifies the packet as a Register Access Packet. */
+
+ uint16 bClient_ID;
+ /* This field is reserved for future use and shall be set to zero. */
+
+ uint16 read_write_info;
+ /* Bits 13:0 a 14-bit unsigned integer that specifies the number of
+ * 32-bit Register Data List items to be transferred in the
+ * Register Data List field.
+ * Bits[15:14] = 00 Write to register(s);
+ * Bits[15:14] = 10 Read from register(s);
+ * Bits[15:14] = 11 Response to a Read.
+ * Bits[15:14] = 01 this value is reserved for future use. */
+
+ uint32 register_address;
+ /* the register address that is to be written to or read from. */
+
+ uint16 parameter_CRC;
+ /* 16-bit CRC of all bytes from the Packet Length to the Register Address. */
+
+ uint32 register_data_list;
+ /* list of 4-byte register data values for/from client registers */
+
+} mddi_register_access_packet_type;
+
+typedef union GCC_PACKED {
+ mddi_video_stream_packet_type video_pkt;
+ mddi_register_access_packet_type register_pkt;
+ /* add 48 byte pad to ensure 64 byte llist struct, that can be
+ * manipulated easily with cache */
+ uint32 alignment_pad[12]; /* 48 bytes */
+} mddi_packet_header_type;
+
+typedef struct GCC_PACKED mddi_host_llist_struct {
+ uint16 link_controller_flags;
+ uint16 packet_header_count;
+ uint16 packet_data_count;
+ void *packet_data_pointer;
+ struct mddi_host_llist_struct *next_packet_pointer;
+ uint16 reserved;
+ mddi_packet_header_type packet_header;
+} mddi_linked_list_type;
+
+typedef struct {
+ struct completion done_comp;
+ mddi_llist_done_cb_type done_cb;
+ uint16 next_idx;
+ boolean waiting;
+ boolean in_use;
+} mddi_linked_list_notify_type;
+
+#define MDDI_LLIST_POOL_SIZE 0x1000
+#define MDDI_MAX_NUM_LLIST_ITEMS (MDDI_LLIST_POOL_SIZE / \
+ sizeof(mddi_linked_list_type))
+#define UNASSIGNED_INDEX MDDI_MAX_NUM_LLIST_ITEMS
+#define MDDI_FIRST_DYNAMIC_LLIST_IDX 0
+
+/* Static llist items can be used for applications that frequently send
+ * the same set of packets using the linked list interface. */
+/* Here we configure for 6 static linked list items:
+ * The 1st is used for a the adaptive backlight setting.
+ * and the remaining 5 are used for sending window adjustments for
+ * MDDI clients that need windowing info sent separate from video
+ * packets. */
+#define MDDI_NUM_STATIC_ABL_ITEMS 1
+#define MDDI_NUM_STATIC_WINDOW_ITEMS 5
+#define MDDI_NUM_STATIC_LLIST_ITEMS (MDDI_NUM_STATIC_ABL_ITEMS + \
+ MDDI_NUM_STATIC_WINDOW_ITEMS)
+#define MDDI_NUM_DYNAMIC_LLIST_ITEMS (MDDI_MAX_NUM_LLIST_ITEMS - \
+ MDDI_NUM_STATIC_LLIST_ITEMS)
+
+#define MDDI_FIRST_STATIC_LLIST_IDX MDDI_NUM_DYNAMIC_LLIST_ITEMS
+#define MDDI_FIRST_STATIC_ABL_IDX MDDI_FIRST_STATIC_LLIST_IDX
+#define MDDI_FIRST_STATIC_WINDOW_IDX (MDDI_FIRST_STATIC_LLIST_IDX + \
+ MDDI_NUM_STATIC_ABL_ITEMS)
+
+/* GPIO registers */
+#define VSYNC_WAKEUP_REG 0x80
+#define GPIO_REG 0x81
+#define GPIO_OUTPUT_REG 0x82
+#define GPIO_INTERRUPT_REG 0x83
+#define GPIO_INTERRUPT_ENABLE_REG 0x84
+#define GPIO_POLARITY_REG 0x85
+
+/* Interrupt Bits */
+#define MDDI_INT_PRI_PTR_READ 0x0001
+#define MDDI_INT_SEC_PTR_READ 0x0002
+#define MDDI_INT_REV_DATA_AVAIL 0x0004
+#define MDDI_INT_DISP_REQ 0x0008
+#define MDDI_INT_PRI_UNDERFLOW 0x0010
+#define MDDI_INT_SEC_UNDERFLOW 0x0020
+#define MDDI_INT_REV_OVERFLOW 0x0040
+#define MDDI_INT_CRC_ERROR 0x0080
+#define MDDI_INT_MDDI_IN 0x0100
+#define MDDI_INT_PRI_OVERWRITE 0x0200
+#define MDDI_INT_SEC_OVERWRITE 0x0400
+#define MDDI_INT_REV_OVERWRITE 0x0800
+#define MDDI_INT_DMA_FAILURE 0x1000
+#define MDDI_INT_LINK_ACTIVE 0x2000
+#define MDDI_INT_IN_HIBERNATION 0x4000
+#define MDDI_INT_PRI_LINK_LIST_DONE 0x8000
+#define MDDI_INT_SEC_LINK_LIST_DONE 0x10000
+#define MDDI_INT_NO_CMD_PKTS_PEND 0x20000
+#define MDDI_INT_RTD_FAILURE 0x40000
+
+#define MDDI_INT_ERROR_CONDITIONS ( \
+ MDDI_INT_PRI_UNDERFLOW | MDDI_INT_SEC_UNDERFLOW | \
+ MDDI_INT_REV_OVERFLOW | MDDI_INT_CRC_ERROR | \
+ MDDI_INT_PRI_OVERWRITE | MDDI_INT_SEC_OVERWRITE | \
+ MDDI_INT_RTD_FAILURE | \
+ MDDI_INT_REV_OVERWRITE | MDDI_INT_DMA_FAILURE)
+
+#define MDDI_INT_LINK_STATE_CHANGES ( \
+ MDDI_INT_LINK_ACTIVE | MDDI_INT_IN_HIBERNATION)
+
+/* Status Bits */
+#define MDDI_STAT_LINK_ACTIVE 0x0001
+#define MDDI_STAT_NEW_REV_PTR 0x0002
+#define MDDI_STAT_NEW_PRI_PTR 0x0004
+#define MDDI_STAT_NEW_SEC_PTR 0x0008
+#define MDDI_STAT_IN_HIBERNATION 0x0010
+#define MDDI_STAT_PRI_LINK_LIST_DONE 0x0020
+#define MDDI_STAT_SEC_LINK_LIST_DONE 0x0040
+#define MDDI_STAT_PENDING_TIMING_PKT 0x0080
+#define MDDI_STAT_PENDING_REV_ENCAP 0x0100
+#define MDDI_STAT_PENDING_POWERDOWN 0x0200
+#define MDDI_STAT_RTD_MEAS_FAIL 0x0800
+#define MDDI_STAT_CLIENT_WAKEUP_REQ 0x1000
+
+/* Command Bits */
+#define MDDI_CMD_POWERDOWN 0x0100
+#define MDDI_CMD_POWERUP 0x0200
+#define MDDI_CMD_HIBERNATE 0x0300
+#define MDDI_CMD_RESET 0x0400
+#define MDDI_CMD_DISP_IGNORE 0x0501
+#define MDDI_CMD_DISP_LISTEN 0x0500
+#define MDDI_CMD_SEND_REV_ENCAP 0x0600
+#define MDDI_CMD_GET_CLIENT_CAP 0x0601
+#define MDDI_CMD_GET_CLIENT_STATUS 0x0602
+#define MDDI_CMD_SEND_RTD 0x0700
+#define MDDI_CMD_LINK_ACTIVE 0x0900
+#define MDDI_CMD_PERIODIC_REV_ENCAP 0x0A00
+
+extern void mddi_host_init(mddi_host_type host);
+extern void mddi_host_powerdown(mddi_host_type host);
+extern uint16 mddi_get_next_free_llist_item(mddi_host_type host, boolean wait);
+extern uint16 mddi_get_reg_read_llist_item(mddi_host_type host, boolean wait);
+extern void mddi_queue_forward_packets(uint16 first_llist_idx,
+ uint16 last_llist_idx,
+ boolean wait,
+ mddi_llist_done_cb_type llist_done_cb,
+ mddi_host_type host);
+
+extern void mddi_host_write_pix_attr_reg(uint32 value);
+extern void mddi_client_lcd_gpio_poll(uint32 poll_reg_val);
+extern void mddi_client_lcd_vsync_detected(boolean detected);
+extern void mddi_host_disable_hibernation(boolean disable);
+
+extern mddi_linked_list_type *llist_extern[];
+extern mddi_linked_list_type *llist_dma_extern[];
+extern mddi_linked_list_notify_type *llist_extern_notify[];
+extern struct timer_list mddi_host_timer;
+
+typedef struct {
+ uint16 transmitting_start_idx;
+ uint16 transmitting_end_idx;
+ uint16 waiting_start_idx;
+ uint16 waiting_end_idx;
+ uint16 reg_read_idx;
+ uint16 next_free_idx;
+ boolean reg_read_waiting;
+} mddi_llist_info_type;
+
+extern mddi_llist_info_type mddi_llist;
+
+#define MDDI_GPIO_DEFAULT_POLLING_INTERVAL 200
+typedef struct {
+ uint32 polling_reg;
+ uint32 polling_val;
+ uint32 polling_interval;
+ boolean polling_enabled;
+} mddi_gpio_info_type;
+
+uint32 mddi_get_client_id(void);
+void mddi_mhctl_remove(mddi_host_type host_idx);
+void mddi_host_timer_service(unsigned long data);
+#endif /* MDDIHOSTI_H */
diff --git a/drivers/staging/msm/mdp.c b/drivers/staging/msm/mdp.c
new file mode 100644
index 0000000..36053af
--- /dev/null
+++ b/drivers/staging/msm/mdp.c
@@ -0,0 +1,1113 @@
+/* Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/hrtimer.h>
+#include <linux/clk.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#ifdef CONFIG_FB_MSM_MDP40
+#include "mdp4.h"
+#endif
+
+static struct clk *mdp_clk;
+static struct clk *mdp_pclk;
+
+struct completion mdp_ppp_comp;
+struct semaphore mdp_ppp_mutex;
+struct semaphore mdp_pipe_ctrl_mutex;
+
+unsigned long mdp_timer_duration = (HZ); /* 1 sec */
+/* unsigned long mdp_mdp_timer_duration=0; */
+
+boolean mdp_ppp_waiting = FALSE;
+uint32 mdp_tv_underflow_cnt;
+uint32 mdp_lcdc_underflow_cnt;
+
+boolean mdp_current_clk_on = FALSE;
+boolean mdp_is_in_isr = FALSE;
+
+/*
+ * legacy mdp_in_processing is only for DMA2-MDDI
+ * this applies to DMA2 block only
+ */
+uint32 mdp_in_processing = FALSE;
+
+#ifdef CONFIG_FB_MSM_MDP40
+uint32 mdp_intr_mask = MDP4_ANY_INTR_MASK;
+#else
+uint32 mdp_intr_mask = MDP_ANY_INTR_MASK;
+#endif
+
+MDP_BLOCK_TYPE mdp_debug[MDP_MAX_BLOCK];
+
+int32 mdp_block_power_cnt[MDP_MAX_BLOCK];
+
+spinlock_t mdp_spin_lock;
+struct workqueue_struct *mdp_dma_wq; /*mdp dma wq */
+struct workqueue_struct *mdp_vsync_wq; /*mdp vsync wq */
+
+static struct workqueue_struct *mdp_pipe_ctrl_wq; /* mdp mdp pipe ctrl wq */
+static struct delayed_work mdp_pipe_ctrl_worker;
+
+#ifdef CONFIG_FB_MSM_MDP40
+struct mdp_dma_data dma2_data;
+struct mdp_dma_data dma_s_data;
+struct mdp_dma_data dma_e_data;
+#else
+static struct mdp_dma_data dma2_data;
+static struct mdp_dma_data dma_s_data;
+static struct mdp_dma_data dma_e_data;
+#endif
+static struct mdp_dma_data dma3_data;
+
+extern ktime_t mdp_dma2_last_update_time;
+
+extern uint32 mdp_dma2_update_time_in_usec;
+extern int mdp_lcd_rd_cnt_offset_slow;
+extern int mdp_lcd_rd_cnt_offset_fast;
+extern int mdp_usec_diff_threshold;
+
+#ifdef CONFIG_FB_MSM_LCDC
+extern int mdp_lcdc_pclk_clk_rate;
+extern int mdp_lcdc_pad_pclk_clk_rate;
+extern int first_pixel_start_x;
+extern int first_pixel_start_y;
+#endif
+
+#ifdef MSM_FB_ENABLE_DBGFS
+struct dentry *mdp_dir;
+#endif
+
+#if defined(CONFIG_PM) && !defined(CONFIG_HAS_EARLYSUSPEND)
+static int mdp_suspend(struct platform_device *pdev, pm_message_t state);
+#else
+#define mdp_suspend NULL
+#endif
+
+struct timeval mdp_dma2_timeval;
+struct timeval mdp_ppp_timeval;
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static struct early_suspend early_suspend;
+#endif
+
+#ifndef CONFIG_FB_MSM_MDP22
+DEFINE_MUTEX(mdp_lut_push_sem);
+static int mdp_lut_i;
+static int mdp_lut_hw_update(struct fb_cmap *cmap)
+{
+ int i;
+ u16 *c[3];
+ u16 r, g, b;
+
+ c[0] = cmap->green;
+ c[1] = cmap->blue;
+ c[2] = cmap->red;
+
+ for (i = 0; i < cmap->len; i++) {
+ if (copy_from_user(&r, cmap->red++, sizeof(r)) ||
+ copy_from_user(&g, cmap->green++, sizeof(g)) ||
+ copy_from_user(&b, cmap->blue++, sizeof(b)))
+ return -EFAULT;
+
+#ifdef CONFIG_FB_MSM_MDP40
+ MDP_OUTP(MDP_BASE + 0x94800 +
+#else
+ MDP_OUTP(MDP_BASE + 0x93800 +
+#endif
+ (0x400*mdp_lut_i) + cmap->start*4 + i*4,
+ ((g & 0xff) |
+ ((b & 0xff) << 8) |
+ ((r & 0xff) << 16)));
+ }
+
+ return 0;
+}
+
+static int mdp_lut_push;
+static int mdp_lut_push_i;
+static int mdp_lut_update_nonlcdc(struct fb_info *info, struct fb_cmap *cmap)
+{
+ int ret;
+
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+ ret = mdp_lut_hw_update(cmap);
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+ if (ret)
+ return ret;
+
+ mutex_lock(&mdp_lut_push_sem);
+ mdp_lut_push = 1;
+ mdp_lut_push_i = mdp_lut_i;
+ mutex_unlock(&mdp_lut_push_sem);
+
+ mdp_lut_i = (mdp_lut_i + 1)%2;
+
+ return 0;
+}
+
+static int mdp_lut_update_lcdc(struct fb_info *info, struct fb_cmap *cmap)
+{
+ int ret;
+
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+ ret = mdp_lut_hw_update(cmap);
+
+ if (ret) {
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+ return ret;
+ }
+
+ MDP_OUTP(MDP_BASE + 0x90070, (mdp_lut_i << 10) | 0x17);
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+ mdp_lut_i = (mdp_lut_i + 1)%2;
+
+ return 0;
+}
+
+#define MDP_HIST_MAX_BIN 32
+static __u32 mdp_hist_r[MDP_HIST_MAX_BIN];
+static __u32 mdp_hist_g[MDP_HIST_MAX_BIN];
+static __u32 mdp_hist_b[MDP_HIST_MAX_BIN];
+
+#ifdef CONFIG_FB_MSM_MDP40
+struct mdp_histogram mdp_hist;
+struct completion mdp_hist_comp;
+#else
+static struct mdp_histogram mdp_hist;
+static struct completion mdp_hist_comp;
+#endif
+
+static int mdp_do_histogram(struct fb_info *info, struct mdp_histogram *hist)
+{
+ int ret = 0;
+
+ if (!hist->frame_cnt || (hist->bin_cnt == 0) ||
+ (hist->bin_cnt > MDP_HIST_MAX_BIN))
+ return -EINVAL;
+
+ INIT_COMPLETION(mdp_hist_comp);
+
+ mdp_hist.bin_cnt = hist->bin_cnt;
+ mdp_hist.r = (hist->r) ? mdp_hist_r : 0;
+ mdp_hist.g = (hist->g) ? mdp_hist_g : 0;
+ mdp_hist.b = (hist->b) ? mdp_hist_b : 0;
+
+#ifdef CONFIG_FB_MSM_MDP40
+ MDP_OUTP(MDP_BASE + 0x95004, hist->frame_cnt);
+ MDP_OUTP(MDP_BASE + 0x95000, 1);
+#else
+ MDP_OUTP(MDP_BASE + 0x94004, hist->frame_cnt);
+ MDP_OUTP(MDP_BASE + 0x94000, 1);
+#endif
+ wait_for_completion_killable(&mdp_hist_comp);
+
+ if (hist->r) {
+ ret = copy_to_user(hist->r, mdp_hist.r, hist->bin_cnt*4);
+ if (ret)
+ goto hist_err;
+ }
+ if (hist->g) {
+ ret = copy_to_user(hist->g, mdp_hist.g, hist->bin_cnt*4);
+ if (ret)
+ goto hist_err;
+ }
+ if (hist->b) {
+ ret = copy_to_user(hist->b, mdp_hist.b, hist->bin_cnt*4);
+ if (ret)
+ goto hist_err;
+ }
+ return 0;
+
+hist_err:
+ printk(KERN_ERR "%s: invalid hist buffer\n", __func__);
+ return ret;
+}
+#endif
+
+/* Returns < 0 on error, 0 on timeout, or > 0 on successful wait */
+
+int mdp_ppp_pipe_wait(void)
+{
+ int ret = 1;
+
+ /* wait 5 seconds for the operation to complete before declaring
+ the MDP hung */
+
+ if (mdp_ppp_waiting == TRUE) {
+ ret = wait_for_completion_interruptible_timeout(&mdp_ppp_comp,
+ 5 * HZ);
+
+ if (!ret)
+ printk(KERN_ERR "%s: Timed out waiting for the MDP.\n",
+ __func__);
+ }
+
+ return ret;
+}
+
+static DEFINE_SPINLOCK(mdp_lock);
+static int mdp_irq_mask;
+static int mdp_irq_enabled;
+
+void mdp_enable_irq(uint32 term)
+{
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(&mdp_lock, irq_flags);
+ if (mdp_irq_mask & term) {
+ printk(KERN_ERR "MDP IRQ term-0x%x is already set\n", term);
+ } else {
+ mdp_irq_mask |= term;
+ if (mdp_irq_mask && !mdp_irq_enabled) {
+ mdp_irq_enabled = 1;
+ enable_irq(INT_MDP);
+ }
+ }
+ spin_unlock_irqrestore(&mdp_lock, irq_flags);
+}
+
+void mdp_disable_irq(uint32 term)
+{
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(&mdp_lock, irq_flags);
+ if (!(mdp_irq_mask & term)) {
+ printk(KERN_ERR "MDP IRQ term-0x%x is not set\n", term);
+ } else {
+ mdp_irq_mask &= ~term;
+ if (!mdp_irq_mask && mdp_irq_enabled) {
+ mdp_irq_enabled = 0;
+ disable_irq(INT_MDP);
+ }
+ }
+ spin_unlock_irqrestore(&mdp_lock, irq_flags);
+}
+
+void mdp_disable_irq_nolock(uint32 term)
+{
+
+ if (!(mdp_irq_mask & term)) {
+ printk(KERN_ERR "MDP IRQ term-0x%x is not set\n", term);
+ } else {
+ mdp_irq_mask &= ~term;
+ if (!mdp_irq_mask && mdp_irq_enabled) {
+ mdp_irq_enabled = 0;
+ disable_irq(INT_MDP);
+ }
+ }
+}
+
+void mdp_pipe_kickoff(uint32 term, struct msm_fb_data_type *mfd)
+{
+
+ dmb(); /* memory barrier */
+
+ /* kick off PPP engine */
+ if (term == MDP_PPP_TERM) {
+ if (mdp_debug[MDP_PPP_BLOCK])
+ jiffies_to_timeval(jiffies, &mdp_ppp_timeval);
+
+ /* let's turn on PPP block */
+ mdp_pipe_ctrl(MDP_PPP_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+ mdp_enable_irq(term);
+ INIT_COMPLETION(mdp_ppp_comp);
+ mdp_ppp_waiting = TRUE;
+ outpdw(MDP_BASE + 0x30, 0x1000);
+ wait_for_completion_killable(&mdp_ppp_comp);
+ mdp_disable_irq(term);
+
+ if (mdp_debug[MDP_PPP_BLOCK]) {
+ struct timeval now;
+
+ jiffies_to_timeval(jiffies, &now);
+ mdp_ppp_timeval.tv_usec =
+ now.tv_usec - mdp_ppp_timeval.tv_usec;
+ MSM_FB_INFO("MDP-PPP: %d\n",
+ (int)mdp_ppp_timeval.tv_usec);
+ }
+ } else if (term == MDP_DMA2_TERM) {
+ if (mdp_debug[MDP_DMA2_BLOCK]) {
+ MSM_FB_INFO("MDP-DMA2: %d\n",
+ (int)mdp_dma2_timeval.tv_usec);
+ jiffies_to_timeval(jiffies, &mdp_dma2_timeval);
+ }
+ /* DMA update timestamp */
+ mdp_dma2_last_update_time = ktime_get_real();
+ /* let's turn on DMA2 block */
+#if 0
+ mdp_pipe_ctrl(MDP_DMA2_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+#endif
+#ifdef CONFIG_FB_MSM_MDP22
+ outpdw(MDP_CMD_DEBUG_ACCESS_BASE + 0x0044, 0x0);/* start DMA */
+#else
+ if (mdp_lut_push) {
+ mutex_lock(&mdp_lut_push_sem);
+ mdp_lut_push = 0;
+ MDP_OUTP(MDP_BASE + 0x90070,
+ (mdp_lut_push_i << 10) | 0x17);
+ mutex_unlock(&mdp_lut_push_sem);
+ }
+#ifdef CONFIG_FB_MSM_MDP40
+ outpdw(MDP_BASE + 0x000c, 0x0); /* start DMA */
+#else
+ outpdw(MDP_BASE + 0x0044, 0x0); /* start DMA */
+#endif
+#endif
+#ifdef CONFIG_FB_MSM_MDP40
+ } else if (term == MDP_DMA_S_TERM) {
+ mdp_pipe_ctrl(MDP_DMA_S_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+ outpdw(MDP_BASE + 0x0010, 0x0); /* start DMA */
+ } else if (term == MDP_DMA_E_TERM) {
+ mdp_pipe_ctrl(MDP_DMA_E_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+ outpdw(MDP_BASE + 0x0014, 0x0); /* start DMA */
+ } else if (term == MDP_OVERLAY0_TERM) {
+ mdp_pipe_ctrl(MDP_OVERLAY0_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+ outpdw(MDP_BASE + 0x0004, 0);
+ } else if (term == MDP_OVERLAY1_TERM) {
+ mdp_pipe_ctrl(MDP_OVERLAY1_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+ outpdw(MDP_BASE + 0x0008, 0);
+ }
+#else
+ } else if (term == MDP_DMA_S_TERM) {
+ mdp_pipe_ctrl(MDP_DMA_S_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+ outpdw(MDP_BASE + 0x0048, 0x0); /* start DMA */
+ }
+#endif
+}
+
+static void mdp_pipe_ctrl_workqueue_handler(struct work_struct *work)
+{
+ mdp_pipe_ctrl(MDP_MASTER_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+}
+
+void mdp_pipe_ctrl(MDP_BLOCK_TYPE block, MDP_BLOCK_POWER_STATE state,
+ boolean isr)
+{
+ boolean mdp_all_blocks_off = TRUE;
+ int i;
+ unsigned long flag;
+
+ spin_lock_irqsave(&mdp_spin_lock, flag);
+ if (MDP_BLOCK_POWER_ON == state) {
+ mdp_block_power_cnt[block]++;
+
+ if (MDP_DMA2_BLOCK == block)
+ mdp_in_processing = TRUE;
+ } else {
+ mdp_block_power_cnt[block]--;
+
+ if (mdp_block_power_cnt[block] < 0) {
+ /*
+ * Master has to serve a request to power off MDP always
+ * It also has a timer to power off. So, in case of
+ * timer expires first and DMA2 finishes later,
+ * master has to power off two times
+ * There shouldn't be multiple power-off request for
+ * other blocks
+ */
+ if (block != MDP_MASTER_BLOCK) {
+ MSM_FB_INFO("mdp_block_power_cnt[block=%d] \
+ multiple power-off request\n", block);
+ }
+ mdp_block_power_cnt[block] = 0;
+ }
+
+ if (MDP_DMA2_BLOCK == block)
+ mdp_in_processing = FALSE;
+ }
+ spin_unlock_irqrestore(&mdp_spin_lock, flag);
+
+ /*
+ * If it's in isr, we send our request to workqueue.
+ * Otherwise, processing happens in the current context
+ */
+ if (isr) {
+ /* checking all blocks power state */
+ for (i = 0; i < MDP_MAX_BLOCK; i++) {
+ if (mdp_block_power_cnt[i] > 0)
+ mdp_all_blocks_off = FALSE;
+ }
+
+ if ((mdp_all_blocks_off) && (mdp_current_clk_on)) {
+ /* send workqueue to turn off mdp power */
+ queue_delayed_work(mdp_pipe_ctrl_wq,
+ &mdp_pipe_ctrl_worker,
+ mdp_timer_duration);
+ }
+ } else {
+ down(&mdp_pipe_ctrl_mutex);
+ /* checking all blocks power state */
+ for (i = 0; i < MDP_MAX_BLOCK; i++) {
+ if (mdp_block_power_cnt[i] > 0)
+ mdp_all_blocks_off = FALSE;
+ }
+
+ /*
+ * find out whether a delayable work item is currently
+ * pending
+ */
+
+ if (delayed_work_pending(&mdp_pipe_ctrl_worker)) {
+ /*
+ * try to cancel the current work if it fails to
+ * stop (which means del_timer can't delete it
+ * from the list, it's about to expire and run),
+ * we have to let it run. queue_delayed_work won't
+ * accept the next job which is same as
+ * queue_delayed_work(mdp_timer_duration = 0)
+ */
+ cancel_delayed_work(&mdp_pipe_ctrl_worker);
+ }
+
+ if ((mdp_all_blocks_off) && (mdp_current_clk_on)) {
+ if (block == MDP_MASTER_BLOCK) {
+ mdp_current_clk_on = FALSE;
+ /* turn off MDP clks */
+ if (mdp_clk != NULL) {
+ clk_disable(mdp_clk);
+ MSM_FB_DEBUG("MDP CLK OFF\n");
+ }
+ if (mdp_pclk != NULL) {
+ clk_disable(mdp_pclk);
+ MSM_FB_DEBUG("MDP PCLK OFF\n");
+ }
+ } else {
+ /* send workqueue to turn off mdp power */
+ queue_delayed_work(mdp_pipe_ctrl_wq,
+ &mdp_pipe_ctrl_worker,
+ mdp_timer_duration);
+ }
+ } else if ((!mdp_all_blocks_off) && (!mdp_current_clk_on)) {
+ mdp_current_clk_on = TRUE;
+ /* turn on MDP clks */
+ if (mdp_clk != NULL) {
+ clk_enable(mdp_clk);
+ MSM_FB_DEBUG("MDP CLK ON\n");
+ }
+ if (mdp_pclk != NULL) {
+ clk_enable(mdp_pclk);
+ MSM_FB_DEBUG("MDP PCLK ON\n");
+ }
+ }
+ up(&mdp_pipe_ctrl_mutex);
+ }
+}
+
+#ifndef CONFIG_FB_MSM_MDP40
+irqreturn_t mdp_isr(int irq, void *ptr)
+{
+ uint32 mdp_interrupt = 0;
+ struct mdp_dma_data *dma;
+
+ mdp_is_in_isr = TRUE;
+ do {
+ mdp_interrupt = inp32(MDP_INTR_STATUS);
+ outp32(MDP_INTR_CLEAR, mdp_interrupt);
+
+ mdp_interrupt &= mdp_intr_mask;
+
+ if (mdp_interrupt & TV_ENC_UNDERRUN) {
+ mdp_interrupt &= ~(TV_ENC_UNDERRUN);
+ mdp_tv_underflow_cnt++;
+ }
+
+ if (!mdp_interrupt)
+ break;
+
+ /* DMA3 TV-Out Start */
+ if (mdp_interrupt & TV_OUT_DMA3_START) {
+ /* let's disable TV out interrupt */
+ mdp_intr_mask &= ~TV_OUT_DMA3_START;
+ outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+
+ dma = &dma3_data;
+ if (dma->waiting) {
+ dma->waiting = FALSE;
+ complete(&dma->comp);
+ }
+ }
+#ifndef CONFIG_FB_MSM_MDP22
+ if (mdp_interrupt & MDP_HIST_DONE) {
+ outp32(MDP_BASE + 0x94018, 0x3);
+ outp32(MDP_INTR_CLEAR, MDP_HIST_DONE);
+ if (mdp_hist.r)
+ memcpy(mdp_hist.r, MDP_BASE + 0x94100,
+ mdp_hist.bin_cnt*4);
+ if (mdp_hist.g)
+ memcpy(mdp_hist.g, MDP_BASE + 0x94200,
+ mdp_hist.bin_cnt*4);
+ if (mdp_hist.b)
+ memcpy(mdp_hist.b, MDP_BASE + 0x94300,
+ mdp_hist.bin_cnt*4);
+ complete(&mdp_hist_comp);
+ }
+
+ /* LCDC UnderFlow */
+ if (mdp_interrupt & LCDC_UNDERFLOW) {
+ mdp_lcdc_underflow_cnt++;
+ }
+ /* LCDC Frame Start */
+ if (mdp_interrupt & LCDC_FRAME_START) {
+ /* let's disable LCDC interrupt */
+ mdp_intr_mask &= ~LCDC_FRAME_START;
+ outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+
+ dma = &dma2_data;
+ if (dma->waiting) {
+ dma->waiting = FALSE;
+ complete(&dma->comp);
+ }
+ }
+
+ /* DMA2 LCD-Out Complete */
+ if (mdp_interrupt & MDP_DMA_S_DONE) {
+ dma = &dma_s_data;
+ dma->busy = FALSE;
+ mdp_pipe_ctrl(MDP_DMA_S_BLOCK, MDP_BLOCK_POWER_OFF,
+ TRUE);
+ complete(&dma->comp);
+ }
+#endif
+
+ /* DMA2 LCD-Out Complete */
+ if (mdp_interrupt & MDP_DMA_P_DONE) {
+ struct timeval now;
+ ktime_t now_k;
+
+ now_k = ktime_get_real();
+ mdp_dma2_last_update_time.tv.sec =
+ now_k.tv.sec - mdp_dma2_last_update_time.tv.sec;
+ mdp_dma2_last_update_time.tv.nsec =
+ now_k.tv.nsec - mdp_dma2_last_update_time.tv.nsec;
+
+ if (mdp_debug[MDP_DMA2_BLOCK]) {
+ jiffies_to_timeval(jiffies, &now);
+ mdp_dma2_timeval.tv_usec =
+ now.tv_usec - mdp_dma2_timeval.tv_usec;
+ }
+
+ dma = &dma2_data;
+ dma->busy = FALSE;
+ mdp_pipe_ctrl(MDP_DMA2_BLOCK, MDP_BLOCK_POWER_OFF,
+ TRUE);
+ complete(&dma->comp);
+ }
+ /* PPP Complete */
+ if (mdp_interrupt & MDP_PPP_DONE) {
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+ mdp_ppp_djob_done();
+#else
+ mdp_pipe_ctrl(MDP_PPP_BLOCK,
+ MDP_BLOCK_POWER_OFF, TRUE);
+ if (mdp_ppp_waiting) {
+ mdp_ppp_waiting = FALSE;
+ complete(&mdp_ppp_comp);
+ }
+#endif
+ }
+ } while (1);
+
+ mdp_is_in_isr = FALSE;
+
+ return IRQ_HANDLED;
+}
+#endif
+
+static void mdp_drv_init(void)
+{
+ int i;
+
+ for (i = 0; i < MDP_MAX_BLOCK; i++) {
+ mdp_debug[i] = 0;
+ }
+
+ /* initialize spin lock and workqueue */
+ spin_lock_init(&mdp_spin_lock);
+ mdp_dma_wq = create_singlethread_workqueue("mdp_dma_wq");
+ mdp_vsync_wq = create_singlethread_workqueue("mdp_vsync_wq");
+ mdp_pipe_ctrl_wq = create_singlethread_workqueue("mdp_pipe_ctrl_wq");
+ INIT_DELAYED_WORK(&mdp_pipe_ctrl_worker,
+ mdp_pipe_ctrl_workqueue_handler);
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+ mdp_ppp_dq_init();
+#endif
+
+ /* initialize semaphore */
+ init_completion(&mdp_ppp_comp);
+ init_MUTEX(&mdp_ppp_mutex);
+ init_MUTEX(&mdp_pipe_ctrl_mutex);
+
+ dma2_data.busy = FALSE;
+ dma2_data.waiting = FALSE;
+ init_completion(&dma2_data.comp);
+ init_MUTEX(&dma2_data.mutex);
+ mutex_init(&dma2_data.ov_mutex);
+
+ dma3_data.busy = FALSE;
+ dma3_data.waiting = FALSE;
+ init_completion(&dma3_data.comp);
+ init_MUTEX(&dma3_data.mutex);
+
+ dma_s_data.busy = FALSE;
+ dma_s_data.waiting = FALSE;
+ init_completion(&dma_s_data.comp);
+ init_MUTEX(&dma_s_data.mutex);
+
+ dma_e_data.busy = FALSE;
+ dma_e_data.waiting = FALSE;
+ init_completion(&dma_e_data.comp);
+
+#ifndef CONFIG_FB_MSM_MDP22
+ init_completion(&mdp_hist_comp);
+#endif
+
+ /* initializing mdp power block counter to 0 */
+ for (i = 0; i < MDP_MAX_BLOCK; i++) {
+ mdp_block_power_cnt[i] = 0;
+ }
+
+#ifdef MSM_FB_ENABLE_DBGFS
+ {
+ struct dentry *root;
+ char sub_name[] = "mdp";
+
+ root = msm_fb_get_debugfs_root();
+ if (root != NULL) {
+ mdp_dir = debugfs_create_dir(sub_name, root);
+
+ if (mdp_dir) {
+ msm_fb_debugfs_file_create(mdp_dir,
+ "dma2_update_time_in_usec",
+ (u32 *) &mdp_dma2_update_time_in_usec);
+ msm_fb_debugfs_file_create(mdp_dir,
+ "vs_rdcnt_slow",
+ (u32 *) &mdp_lcd_rd_cnt_offset_slow);
+ msm_fb_debugfs_file_create(mdp_dir,
+ "vs_rdcnt_fast",
+ (u32 *) &mdp_lcd_rd_cnt_offset_fast);
+ msm_fb_debugfs_file_create(mdp_dir,
+ "mdp_usec_diff_threshold",
+ (u32 *) &mdp_usec_diff_threshold);
+ msm_fb_debugfs_file_create(mdp_dir,
+ "mdp_current_clk_on",
+ (u32 *) &mdp_current_clk_on);
+#ifdef CONFIG_FB_MSM_LCDC
+ msm_fb_debugfs_file_create(mdp_dir,
+ "lcdc_start_x",
+ (u32 *) &first_pixel_start_x);
+ msm_fb_debugfs_file_create(mdp_dir,
+ "lcdc_start_y",
+ (u32 *) &first_pixel_start_y);
+ msm_fb_debugfs_file_create(mdp_dir,
+ "mdp_lcdc_pclk_clk_rate",
+ (u32 *) &mdp_lcdc_pclk_clk_rate);
+ msm_fb_debugfs_file_create(mdp_dir,
+ "mdp_lcdc_pad_pclk_clk_rate",
+ (u32 *) &mdp_lcdc_pad_pclk_clk_rate);
+#endif
+ }
+ }
+ }
+#endif
+}
+
+static int mdp_probe(struct platform_device *pdev);
+static int mdp_remove(struct platform_device *pdev);
+
+static struct platform_driver mdp_driver = {
+ .probe = mdp_probe,
+ .remove = mdp_remove,
+#ifndef CONFIG_HAS_EARLYSUSPEND
+ .suspend = mdp_suspend,
+ .resume = NULL,
+#endif
+ .shutdown = NULL,
+ .driver = {
+ /*
+ * Driver name must match the device name added in
+ * platform.c.
+ */
+ .name = "mdp",
+ },
+};
+
+static int mdp_off(struct platform_device *pdev)
+{
+ int ret = 0;
+
+#ifdef MDP_HW_VSYNC
+ struct msm_fb_data_type *mfd = platform_get_drvdata(pdev);
+#endif
+
+ ret = panel_next_off(pdev);
+
+#ifdef MDP_HW_VSYNC
+ mdp_hw_vsync_clk_disable(mfd);
+#endif
+
+ return ret;
+}
+
+static int mdp_on(struct platform_device *pdev)
+{
+#ifdef MDP_HW_VSYNC
+ struct msm_fb_data_type *mfd = platform_get_drvdata(pdev);
+#endif
+
+ int ret = 0;
+
+#ifdef MDP_HW_VSYNC
+ mdp_hw_vsync_clk_enable(mfd);
+#endif
+
+ ret = panel_next_on(pdev);
+
+ return ret;
+}
+
+static int mdp_irq_clk_setup(void)
+{
+ int ret;
+
+#ifdef CONFIG_FB_MSM_MDP40
+ ret = request_irq(INT_MDP, mdp4_isr, IRQF_DISABLED, "MDP", 0);
+#else
+ ret = request_irq(INT_MDP, mdp_isr, IRQF_DISABLED, "MDP", 0);
+#endif
+ if (ret) {
+ printk(KERN_ERR "mdp request_irq() failed!\n");
+ return ret;
+ }
+ disable_irq(INT_MDP);
+
+ mdp_clk = clk_get(NULL, "mdp_clk");
+
+ if (IS_ERR(mdp_clk)) {
+ ret = PTR_ERR(mdp_clk);
+ printk(KERN_ERR "can't get mdp_clk error:%d!\n", ret);
+ free_irq(INT_MDP, 0);
+ return ret;
+ }
+
+ mdp_pclk = clk_get(NULL, "mdp_pclk");
+ if (IS_ERR(mdp_pclk))
+ mdp_pclk = NULL;
+
+
+#ifdef CONFIG_FB_MSM_MDP40
+ /*
+ * mdp_clk should greater than mdp_pclk always
+ */
+ clk_set_rate(mdp_clk, 122880000); /* 122.88 Mhz */
+ printk(KERN_INFO "mdp_clk: mdp_clk=%d mdp_pclk=%d\n",
+ (int)clk_get_rate(mdp_clk), (int)clk_get_rate(mdp_pclk));
+#endif
+
+ return 0;
+}
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+static int mdp_resource_initialized;
+static struct msm_panel_common_pdata *mdp_pdata;
+
+static int mdp_probe(struct platform_device *pdev)
+{
+ struct platform_device *msm_fb_dev = NULL;
+ struct msm_fb_data_type *mfd;
+ struct msm_fb_panel_data *pdata = NULL;
+ int rc;
+ resource_size_t size ;
+#ifdef CONFIG_FB_MSM_MDP40
+ int intf, if_no;
+#else
+ unsigned long flag;
+#endif
+
+ if ((pdev->id == 0) && (pdev->num_resources > 0)) {
+ mdp_pdata = pdev->dev.platform_data;
+
+ size = resource_size(&pdev->resource[0]);
+ msm_mdp_base = ioremap(pdev->resource[0].start, size);
+
+ MSM_FB_INFO("MDP HW Base phy_Address = 0x%x virt = 0x%x\n",
+ (int)pdev->resource[0].start, (int)msm_mdp_base);
+
+ if (unlikely(!msm_mdp_base))
+ return -ENOMEM;
+
+ printk("irq clk setup\n");
+ rc = mdp_irq_clk_setup();
+ printk("irq clk setup done\n");
+ if (rc)
+ return rc;
+
+ /* initializing mdp hw */
+#ifdef CONFIG_FB_MSM_MDP40
+ mdp4_hw_init();
+#else
+ mdp_hw_init();
+#endif
+
+ mdp_resource_initialized = 1;
+ return 0;
+ }
+
+ if (!mdp_resource_initialized)
+ return -EPERM;
+
+ mfd = platform_get_drvdata(pdev);
+
+ if (!mfd)
+ return -ENODEV;
+
+ if (mfd->key != MFD_KEY)
+ return -EINVAL;
+
+ if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+ return -ENOMEM;
+
+ msm_fb_dev = platform_device_alloc("msm_fb", pdev->id);
+ if (!msm_fb_dev)
+ return -ENOMEM;
+
+ /* link to the latest pdev */
+ mfd->pdev = msm_fb_dev;
+
+ /* add panel data */
+ if (platform_device_add_data
+ (msm_fb_dev, pdev->dev.platform_data,
+ sizeof(struct msm_fb_panel_data))) {
+ printk(KERN_ERR "mdp_probe: platform_device_add_data failed!\n");
+ rc = -ENOMEM;
+ goto mdp_probe_err;
+ }
+ /* data chain */
+ pdata = msm_fb_dev->dev.platform_data;
+ pdata->on = mdp_on;
+ pdata->off = mdp_off;
+ pdata->next = pdev;
+
+ switch (mfd->panel.type) {
+ case EXT_MDDI_PANEL:
+ case MDDI_PANEL:
+ case EBI2_PANEL:
+ INIT_WORK(&mfd->dma_update_worker,
+ mdp_lcd_update_workqueue_handler);
+ INIT_WORK(&mfd->vsync_resync_worker,
+ mdp_vsync_resync_workqueue_handler);
+ mfd->hw_refresh = FALSE;
+
+ if (mfd->panel.type == EXT_MDDI_PANEL) {
+ /* 15 fps -> 66 msec */
+ mfd->refresh_timer_duration = (66 * HZ / 1000);
+ } else {
+ /* 24 fps -> 42 msec */
+ mfd->refresh_timer_duration = (42 * HZ / 1000);
+ }
+
+#ifdef CONFIG_FB_MSM_MDP22
+ mfd->dma_fnc = mdp_dma2_update;
+ mfd->dma = &dma2_data;
+#else
+ if (mfd->panel_info.pdest == DISPLAY_1) {
+#ifdef CONFIG_FB_MSM_OVERLAY
+ mfd->dma_fnc = mdp4_mddi_overlay;
+#else
+ mfd->dma_fnc = mdp_dma2_update;
+#endif
+ mfd->dma = &dma2_data;
+ mfd->lut_update = mdp_lut_update_nonlcdc;
+ mfd->do_histogram = mdp_do_histogram;
+ } else {
+ mfd->dma_fnc = mdp_dma_s_update;
+ mfd->dma = &dma_s_data;
+ }
+#endif
+ if (mdp_pdata)
+ mfd->vsync_gpio = mdp_pdata->gpio;
+ else
+ mfd->vsync_gpio = -1;
+
+#ifdef CONFIG_FB_MSM_MDP40
+ if (mfd->panel.type == EBI2_PANEL)
+ intf = EBI2_INTF;
+ else
+ intf = MDDI_INTF;
+
+ if (mfd->panel_info.pdest == DISPLAY_1)
+ if_no = PRIMARY_INTF_SEL;
+ else
+ if_no = SECONDARY_INTF_SEL;
+
+ mdp4_display_intf_sel(if_no, intf);
+#endif
+ mdp_config_vsync(mfd);
+ break;
+
+ case HDMI_PANEL:
+ case LCDC_PANEL:
+ pdata->on = mdp_lcdc_on;
+ pdata->off = mdp_lcdc_off;
+ mfd->hw_refresh = TRUE;
+ mfd->cursor_update = mdp_hw_cursor_update;
+#ifndef CONFIG_FB_MSM_MDP22
+ mfd->lut_update = mdp_lut_update_lcdc;
+ mfd->do_histogram = mdp_do_histogram;
+#endif
+#ifdef CONFIG_FB_MSM_OVERLAY
+ mfd->dma_fnc = mdp4_lcdc_overlay;
+#else
+ mfd->dma_fnc = mdp_lcdc_update;
+#endif
+
+#ifdef CONFIG_FB_MSM_MDP40
+ if (mfd->panel.type == HDMI_PANEL) {
+ mfd->dma = &dma_e_data;
+ mdp4_display_intf_sel(EXTERNAL_INTF_SEL, LCDC_RGB_INTF);
+ } else {
+ mfd->dma = &dma2_data;
+ mdp4_display_intf_sel(PRIMARY_INTF_SEL, LCDC_RGB_INTF);
+ }
+#else
+ mfd->dma = &dma2_data;
+ spin_lock_irqsave(&mdp_spin_lock, flag);
+ mdp_intr_mask &= ~MDP_DMA_P_DONE;
+ outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+ spin_unlock_irqrestore(&mdp_spin_lock, flag);
+#endif
+ break;
+
+ case TV_PANEL:
+ pdata->on = mdp_dma3_on;
+ pdata->off = mdp_dma3_off;
+ mfd->hw_refresh = TRUE;
+ mfd->dma_fnc = mdp_dma3_update;
+ mfd->dma = &dma3_data;
+ break;
+
+ default:
+ printk(KERN_ERR "mdp_probe: unknown device type!\n");
+ rc = -ENODEV;
+ goto mdp_probe_err;
+ }
+
+ /* set driver data */
+ platform_set_drvdata(msm_fb_dev, mfd);
+
+ rc = platform_device_add(msm_fb_dev);
+ if (rc) {
+ goto mdp_probe_err;
+ }
+
+ pdev_list[pdev_list_cnt++] = pdev;
+ return 0;
+
+ mdp_probe_err:
+ platform_device_put(msm_fb_dev);
+ return rc;
+}
+
+static void mdp_suspend_sub(void)
+{
+ /* cancel pipe ctrl worker */
+ cancel_delayed_work(&mdp_pipe_ctrl_worker);
+
+ /* for workder can't be cancelled... */
+ flush_workqueue(mdp_pipe_ctrl_wq);
+
+ /* let's wait for PPP completion */
+ while (mdp_block_power_cnt[MDP_PPP_BLOCK] > 0) ;
+
+ /* try to power down */
+ mdp_pipe_ctrl(MDP_MASTER_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+}
+
+#if defined(CONFIG_PM) && !defined(CONFIG_HAS_EARLYSUSPEND)
+static int mdp_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ mdp_suspend_sub();
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void mdp_early_suspend(struct early_suspend *h)
+{
+ mdp_suspend_sub();
+}
+#endif
+
+static int mdp_remove(struct platform_device *pdev)
+{
+ iounmap(msm_mdp_base);
+ return 0;
+}
+
+static int mdp_register_driver(void)
+{
+#ifdef CONFIG_HAS_EARLYSUSPEND
+ early_suspend.level = EARLY_SUSPEND_LEVEL_DISABLE_FB - 1;
+ early_suspend.suspend = mdp_early_suspend;
+ register_early_suspend(&early_suspend);
+#endif
+
+ return platform_driver_register(&mdp_driver);
+}
+
+static int __init mdp_driver_init(void)
+{
+ int ret;
+
+ mdp_drv_init();
+
+ ret = mdp_register_driver();
+ if (ret) {
+ printk(KERN_ERR "mdp_register_driver() failed!\n");
+ return ret;
+ }
+
+#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_FB_MSM_MDP40)
+ mdp4_debugfs_init();
+#endif
+
+ return 0;
+
+}
+
+module_init(mdp_driver_init);
diff --git a/drivers/staging/msm/mdp.h b/drivers/staging/msm/mdp.h
new file mode 100644
index 0000000..0a5d6ac
--- /dev/null
+++ b/drivers/staging/msm/mdp.h
@@ -0,0 +1,695 @@
+/* Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Code Aurora nor
+ * the names of its contributors may be used to endorse or promote
+ * products derived from this software without specific prior written
+ * permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MDP_H
+#define MDP_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/hrtimer.h>
+#include "msm_mdp.h"
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+
+#include "msm_fb_panel.h"
+
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+#include "mdp_ppp_dq.h"
+#endif
+
+#ifdef BIT
+#undef BIT
+#endif
+
+#define BIT(x) (1<<(x))
+
+#define MDPOP_NOP 0
+#define MDPOP_LR BIT(0) /* left to right flip */
+#define MDPOP_UD BIT(1) /* up and down flip */
+#define MDPOP_ROT90 BIT(2) /* rotate image to 90 degree */
+#define MDPOP_ROT180 (MDPOP_UD|MDPOP_LR)
+#define MDPOP_ROT270 (MDPOP_ROT90|MDPOP_UD|MDPOP_LR)
+#define MDPOP_ASCALE BIT(7)
+#define MDPOP_ALPHAB BIT(8) /* enable alpha blending */
+#define MDPOP_TRANSP BIT(9) /* enable transparency */
+#define MDPOP_DITHER BIT(10) /* enable dither */
+#define MDPOP_SHARPENING BIT(11) /* enable sharpening */
+#define MDPOP_BLUR BIT(12) /* enable blur */
+#define MDPOP_FG_PM_ALPHA BIT(13)
+
+struct mdp_table_entry {
+ uint32_t reg;
+ uint32_t val;
+};
+
+extern struct mdp_ccs mdp_ccs_yuv2rgb ;
+extern struct mdp_ccs mdp_ccs_rgb2yuv ;
+
+/*
+ * MDP Image Structure
+ */
+typedef struct mdpImg_ {
+ uint32 imgType; /* Image type */
+ uint32 *bmy_addr; /* bitmap or y addr */
+ uint32 *cbcr_addr; /* cbcr addr */
+ uint32 width; /* image width */
+ uint32 mdpOp; /* image opertion (rotation,flip up/down, alpha/tp) */
+ uint32 tpVal; /* transparency color */
+ uint32 alpha; /* alpha percentage 0%(0x0) ~ 100%(0x100) */
+ int sp_value; /* sharpening strength */
+} MDPIMG;
+
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+#define MDP_OUTP(addr, data) mdp_ppp_outdw((uint32_t)(addr), \
+ (uint32_t)(data))
+#else
+#define MDP_OUTP(addr, data) outpdw((addr), (data))
+#endif
+
+#define MDP_KTIME2USEC(kt) (kt.tv.sec*1000000 + kt.tv.nsec/1000)
+
+#define MDP_BASE msm_mdp_base
+
+typedef enum {
+ MDP_BC_SCALE_POINT2_POINT4,
+ MDP_BC_SCALE_POINT4_POINT6,
+ MDP_BC_SCALE_POINT6_POINT8,
+ MDP_BC_SCALE_POINT8_1,
+ MDP_BC_SCALE_UP,
+ MDP_PR_SCALE_POINT2_POINT4,
+ MDP_PR_SCALE_POINT4_POINT6,
+ MDP_PR_SCALE_POINT6_POINT8,
+ MDP_PR_SCALE_POINT8_1,
+ MDP_PR_SCALE_UP,
+ MDP_SCALE_BLUR,
+ MDP_INIT_SCALE
+} MDP_SCALE_MODE;
+
+typedef enum {
+ MDP_BLOCK_POWER_OFF,
+ MDP_BLOCK_POWER_ON
+} MDP_BLOCK_POWER_STATE;
+
+typedef enum {
+ MDP_MASTER_BLOCK,
+ MDP_CMD_BLOCK,
+ MDP_PPP_BLOCK,
+ MDP_DMA2_BLOCK,
+ MDP_DMA3_BLOCK,
+ MDP_DMA_S_BLOCK,
+ MDP_DMA_E_BLOCK,
+ MDP_OVERLAY0_BLOCK,
+ MDP_OVERLAY1_BLOCK,
+ MDP_MAX_BLOCK
+} MDP_BLOCK_TYPE;
+
+/* Let's keep Q Factor power of 2 for optimization */
+#define MDP_SCALE_Q_FACTOR 512
+
+#ifdef CONFIG_FB_MSM_MDP31
+#define MDP_MAX_X_SCALE_FACTOR (MDP_SCALE_Q_FACTOR*8)
+#define MDP_MIN_X_SCALE_FACTOR (MDP_SCALE_Q_FACTOR/8)
+#define MDP_MAX_Y_SCALE_FACTOR (MDP_SCALE_Q_FACTOR*8)
+#define MDP_MIN_Y_SCALE_FACTOR (MDP_SCALE_Q_FACTOR/8)
+#else
+#define MDP_MAX_X_SCALE_FACTOR (MDP_SCALE_Q_FACTOR*4)
+#define MDP_MIN_X_SCALE_FACTOR (MDP_SCALE_Q_FACTOR/4)
+#define MDP_MAX_Y_SCALE_FACTOR (MDP_SCALE_Q_FACTOR*4)
+#define MDP_MIN_Y_SCALE_FACTOR (MDP_SCALE_Q_FACTOR/4)
+#endif
+
+/* SHIM Q Factor */
+#define PHI_Q_FACTOR 29
+#define PQF_PLUS_5 (PHI_Q_FACTOR + 5) /* due to 32 phases */
+#define PQF_PLUS_4 (PHI_Q_FACTOR + 4)
+#define PQF_PLUS_2 (PHI_Q_FACTOR + 2) /* to get 4.0 */
+#define PQF_MINUS_2 (PHI_Q_FACTOR - 2) /* to get 0.25 */
+#define PQF_PLUS_5_PLUS_2 (PQF_PLUS_5 + 2)
+#define PQF_PLUS_5_MINUS_2 (PQF_PLUS_5 - 2)
+
+#define MDP_CONVTP(tpVal) (((tpVal&0xF800)<<8)|((tpVal&0x7E0)<<5)|((tpVal&0x1F)<<3))
+
+#define MDPOP_ROTATION (MDPOP_ROT90|MDPOP_LR|MDPOP_UD)
+#define MDP_CHKBIT(val, bit) ((bit) == ((val) & (bit)))
+
+/* overlay interface API defines */
+typedef enum {
+ MORE_IBUF,
+ FINAL_IBUF,
+ COMPLETE_IBUF
+} MDP_IBUF_STATE;
+
+struct mdp_dirty_region {
+ __u32 xoffset; /* source origin in the x-axis */
+ __u32 yoffset; /* source origin in the y-axis */
+ __u32 width; /* number of pixels in the x-axis */
+ __u32 height; /* number of pixels in the y-axis */
+};
+
+/*
+ * MDP extended data types
+ */
+typedef struct mdp_roi_s {
+ uint32 x;
+ uint32 y;
+ uint32 width;
+ uint32 height;
+ int32 lcd_x;
+ int32 lcd_y;
+ uint32 dst_width;
+ uint32 dst_height;
+} MDP_ROI;
+
+typedef struct mdp_ibuf_s {
+ uint8 *buf;
+ uint32 bpp;
+ uint32 ibuf_type;
+ uint32 ibuf_width;
+ uint32 ibuf_height;
+
+ MDP_ROI roi;
+ MDPIMG mdpImg;
+
+ int32 dma_x;
+ int32 dma_y;
+ uint32 dma_w;
+ uint32 dma_h;
+
+ uint32 vsync_enable;
+ uint32 visible_swapped;
+} MDPIBUF;
+
+struct mdp_dma_data {
+ boolean busy;
+ boolean waiting;
+ struct mutex ov_mutex;
+ struct semaphore mutex;
+ struct completion comp;
+};
+
+#define MDP_CMD_DEBUG_ACCESS_BASE (MDP_BASE+0x10000)
+
+#define MDP_DMA2_TERM 0x1
+#define MDP_DMA3_TERM 0x2
+#define MDP_PPP_TERM 0x4
+#define MDP_DMA_S_TERM 0x8
+#ifdef CONFIG_FB_MSM_MDP40
+#define MDP_DMA_E_TERM 0x10
+#define MDP_OVERLAY0_TERM 0x20
+#define MDP_OVERLAY1_TERM 0x40
+#endif
+
+#define ACTIVE_START_X_EN BIT(31)
+#define ACTIVE_START_Y_EN BIT(31)
+#define ACTIVE_HIGH 0
+#define ACTIVE_LOW 1
+#define MDP_DMA_S_DONE BIT(2)
+#define LCDC_FRAME_START BIT(15)
+#define LCDC_UNDERFLOW BIT(16)
+
+#ifdef CONFIG_FB_MSM_MDP22
+#define MDP_DMA_P_DONE BIT(2)
+#else
+#define MDP_DMA_P_DONE BIT(14)
+#endif
+
+#define MDP_PPP_DONE BIT(0)
+#define TV_OUT_DMA3_DONE BIT(6)
+#define TV_ENC_UNDERRUN BIT(7)
+#define TV_OUT_DMA3_START BIT(13)
+#define MDP_HIST_DONE BIT(20)
+
+#ifdef CONFIG_FB_MSM_MDP22
+#define MDP_ANY_INTR_MASK (MDP_PPP_DONE| \
+ MDP_DMA_P_DONE| \
+ TV_ENC_UNDERRUN)
+#else
+#define MDP_ANY_INTR_MASK (MDP_PPP_DONE| \
+ MDP_DMA_P_DONE| \
+ MDP_DMA_S_DONE| \
+ LCDC_UNDERFLOW| \
+ MDP_HIST_DONE| \
+ TV_ENC_UNDERRUN)
+#endif
+
+#define MDP_TOP_LUMA 16
+#define MDP_TOP_CHROMA 0
+#define MDP_BOTTOM_LUMA 19
+#define MDP_BOTTOM_CHROMA 3
+#define MDP_LEFT_LUMA 22
+#define MDP_LEFT_CHROMA 6
+#define MDP_RIGHT_LUMA 25
+#define MDP_RIGHT_CHROMA 9
+
+#define CLR_G 0x0
+#define CLR_B 0x1
+#define CLR_R 0x2
+#define CLR_ALPHA 0x3
+
+#define CLR_Y CLR_G
+#define CLR_CB CLR_B
+#define CLR_CR CLR_R
+
+/* from lsb to msb */
+#define MDP_GET_PACK_PATTERN(a,x,y,z,bit) (((a)<<(bit*3))|((x)<<(bit*2))|((y)<<bit)|(z))
+
+/*
+ * 0x0000 0x0004 0x0008 MDP sync config
+ */
+#ifdef CONFIG_FB_MSM_MDP22
+#define MDP_SYNCFG_HGT_LOC 22
+#define MDP_SYNCFG_VSYNC_EXT_EN BIT(21)
+#define MDP_SYNCFG_VSYNC_INT_EN BIT(20)
+#else
+#define MDP_SYNCFG_HGT_LOC 21
+#define MDP_SYNCFG_VSYNC_EXT_EN BIT(20)
+#define MDP_SYNCFG_VSYNC_INT_EN BIT(19)
+#define MDP_HW_VSYNC
+#endif
+
+/*
+ * 0x0018 MDP VSYNC THREASH
+ */
+#define MDP_PRIM_BELOW_LOC 0
+#define MDP_PRIM_ABOVE_LOC 8
+
+/*
+ * MDP_PRIMARY_VSYNC_OUT_CTRL
+ * 0x0080,84,88 internal vsync pulse config
+ */
+#define VSYNC_PULSE_EN BIT(31)
+#define VSYNC_PULSE_INV BIT(30)
+
+/*
+ * 0x008c MDP VSYNC CONTROL
+ */
+#define DISP0_VSYNC_MAP_VSYNC0 0
+#define DISP0_VSYNC_MAP_VSYNC1 BIT(0)
+#define DISP0_VSYNC_MAP_VSYNC2 BIT(0)|BIT(1)
+
+#define DISP1_VSYNC_MAP_VSYNC0 0
+#define DISP1_VSYNC_MAP_VSYNC1 BIT(2)
+#define DISP1_VSYNC_MAP_VSYNC2 BIT(2)|BIT(3)
+
+#define PRIMARY_LCD_SYNC_EN BIT(4)
+#define PRIMARY_LCD_SYNC_DISABLE 0
+
+#define SECONDARY_LCD_SYNC_EN BIT(5)
+#define SECONDARY_LCD_SYNC_DISABLE 0
+
+#define EXTERNAL_LCD_SYNC_EN BIT(6)
+#define EXTERNAL_LCD_SYNC_DISABLE 0
+
+/*
+ * 0x101f0 MDP VSYNC Threshold
+ */
+#define VSYNC_THRESHOLD_ABOVE_LOC 0
+#define VSYNC_THRESHOLD_BELOW_LOC 16
+#define VSYNC_ANTI_TEAR_EN BIT(31)
+
+/*
+ * 0x10004 command config
+ */
+#define MDP_CMD_DBGBUS_EN BIT(0)
+
+/*
+ * 0x10124 or 0x101d4PPP source config
+ */
+#define PPP_SRC_C0G_8BITS (BIT(1)|BIT(0))
+#define PPP_SRC_C1B_8BITS (BIT(3)|BIT(2))
+#define PPP_SRC_C2R_8BITS (BIT(5)|BIT(4))
+#define PPP_SRC_C3A_8BITS (BIT(7)|BIT(6))
+
+#define PPP_SRC_C0G_6BITS BIT(1)
+#define PPP_SRC_C1B_6BITS BIT(3)
+#define PPP_SRC_C2R_6BITS BIT(5)
+
+#define PPP_SRC_C0G_5BITS BIT(0)
+#define PPP_SRC_C1B_5BITS BIT(2)
+#define PPP_SRC_C2R_5BITS BIT(4)
+
+#define PPP_SRC_C3_ALPHA_EN BIT(8)
+
+#define PPP_SRC_BPP_INTERLVD_1BYTES 0
+#define PPP_SRC_BPP_INTERLVD_2BYTES BIT(9)
+#define PPP_SRC_BPP_INTERLVD_3BYTES BIT(10)
+#define PPP_SRC_BPP_INTERLVD_4BYTES (BIT(10)|BIT(9))
+
+#define PPP_SRC_BPP_ROI_ODD_X BIT(11)
+#define PPP_SRC_BPP_ROI_ODD_Y BIT(12)
+#define PPP_SRC_INTERLVD_2COMPONENTS BIT(13)
+#define PPP_SRC_INTERLVD_3COMPONENTS BIT(14)
+#define PPP_SRC_INTERLVD_4COMPONENTS (BIT(14)|BIT(13))
+
+/*
+ * RGB666 unpack format
+ * TIGHT means R6+G6+B6 together
+ * LOOSE means R6+2 +G6+2+ B6+2 (with MSB)
+ * or 2+R6 +2+G6 +2+B6 (with LSB)
+ */
+#define PPP_SRC_UNPACK_TIGHT BIT(17)
+#define PPP_SRC_UNPACK_LOOSE 0
+#define PPP_SRC_UNPACK_ALIGN_LSB 0
+#define PPP_SRC_UNPACK_ALIGN_MSB BIT(18)
+
+#define PPP_SRC_FETCH_PLANES_INTERLVD 0
+#define PPP_SRC_FETCH_PLANES_PSEUDOPLNR BIT(20)
+
+#define PPP_SRC_WMV9_MODE BIT(21) /* window media version 9 */
+
+/*
+ * 0x10138 PPP operation config
+ */
+#define PPP_OP_SCALE_X_ON BIT(0)
+#define PPP_OP_SCALE_Y_ON BIT(1)
+
+#define PPP_OP_CONVERT_RGB2YCBCR 0
+#define PPP_OP_CONVERT_YCBCR2RGB BIT(2)
+#define PPP_OP_CONVERT_ON BIT(3)
+
+#define PPP_OP_CONVERT_MATRIX_PRIMARY 0
+#define PPP_OP_CONVERT_MATRIX_SECONDARY BIT(4)
+
+#define PPP_OP_LUT_C0_ON BIT(5)
+#define PPP_OP_LUT_C1_ON BIT(6)
+#define PPP_OP_LUT_C2_ON BIT(7)
+
+/* rotate or blend enable */
+#define PPP_OP_ROT_ON BIT(8)
+
+#define PPP_OP_ROT_90 BIT(9)
+#define PPP_OP_FLIP_LR BIT(10)
+#define PPP_OP_FLIP_UD BIT(11)
+
+#define PPP_OP_BLEND_ON BIT(12)
+
+#define PPP_OP_BLEND_SRCPIXEL_ALPHA 0
+#define PPP_OP_BLEND_DSTPIXEL_ALPHA BIT(13)
+#define PPP_OP_BLEND_CONSTANT_ALPHA BIT(14)
+#define PPP_OP_BLEND_SRCPIXEL_TRANSP (BIT(13)|BIT(14))
+
+#define PPP_OP_BLEND_ALPHA_BLEND_NORMAL 0
+#define PPP_OP_BLEND_ALPHA_BLEND_REVERSE BIT(15)
+
+#define PPP_OP_DITHER_EN BIT(16)
+
+#define PPP_OP_COLOR_SPACE_RGB 0
+#define PPP_OP_COLOR_SPACE_YCBCR BIT(17)
+
+#define PPP_OP_SRC_CHROMA_RGB 0
+#define PPP_OP_SRC_CHROMA_H2V1 BIT(18)
+#define PPP_OP_SRC_CHROMA_H1V2 BIT(19)
+#define PPP_OP_SRC_CHROMA_420 (BIT(18)|BIT(19))
+#define PPP_OP_SRC_CHROMA_COSITE 0
+#define PPP_OP_SRC_CHROMA_OFFSITE BIT(20)
+
+#define PPP_OP_DST_CHROMA_RGB 0
+#define PPP_OP_DST_CHROMA_H2V1 BIT(21)
+#define PPP_OP_DST_CHROMA_H1V2 BIT(22)
+#define PPP_OP_DST_CHROMA_420 (BIT(21)|BIT(22))
+#define PPP_OP_DST_CHROMA_COSITE 0
+#define PPP_OP_DST_CHROMA_OFFSITE BIT(23)
+
+#define PPP_BLEND_CALPHA_TRNASP BIT(24)
+
+#define PPP_OP_BG_CHROMA_RGB 0
+#define PPP_OP_BG_CHROMA_H2V1 BIT(25)
+#define PPP_OP_BG_CHROMA_H1V2 BIT(26)
+#define PPP_OP_BG_CHROMA_420 BIT(25)|BIT(26)
+#define PPP_OP_BG_CHROMA_SITE_COSITE 0
+#define PPP_OP_BG_CHROMA_SITE_OFFSITE BIT(27)
+#define PPP_OP_DEINT_EN BIT(29)
+
+#define PPP_BLEND_BG_USE_ALPHA_SEL (1 << 0)
+#define PPP_BLEND_BG_ALPHA_REVERSE (1 << 3)
+#define PPP_BLEND_BG_SRCPIXEL_ALPHA (0 << 1)
+#define PPP_BLEND_BG_DSTPIXEL_ALPHA (1 << 1)
+#define PPP_BLEND_BG_CONSTANT_ALPHA (2 << 1)
+#define PPP_BLEND_BG_CONST_ALPHA_VAL(x) ((x) << 24)
+
+#define PPP_OP_DST_RGB 0
+#define PPP_OP_DST_YCBCR BIT(30)
+/*
+ * 0x10150 PPP destination config
+ */
+#define PPP_DST_C0G_8BIT (BIT(0)|BIT(1))
+#define PPP_DST_C1B_8BIT (BIT(3)|BIT(2))
+#define PPP_DST_C2R_8BIT (BIT(5)|BIT(4))
+#define PPP_DST_C3A_8BIT (BIT(7)|BIT(6))
+
+#define PPP_DST_C0G_6BIT BIT(1)
+#define PPP_DST_C1B_6BIT BIT(3)
+#define PPP_DST_C2R_6BIT BIT(5)
+
+#define PPP_DST_C0G_5BIT BIT(0)
+#define PPP_DST_C1B_5BIT BIT(2)
+#define PPP_DST_C2R_5BIT BIT(4)
+
+#define PPP_DST_C3A_8BIT (BIT(7)|BIT(6))
+#define PPP_DST_C3ALPHA_EN BIT(8)
+
+#define PPP_DST_PACKET_CNT_INTERLVD_2ELEM BIT(9)
+#define PPP_DST_PACKET_CNT_INTERLVD_3ELEM BIT(10)
+#define PPP_DST_PACKET_CNT_INTERLVD_4ELEM (BIT(10)|BIT(9))
+#define PPP_DST_PACKET_CNT_INTERLVD_6ELEM (BIT(11)|BIT(9))
+
+#define PPP_DST_PACK_LOOSE 0
+#define PPP_DST_PACK_TIGHT BIT(13)
+#define PPP_DST_PACK_ALIGN_LSB 0
+#define PPP_DST_PACK_ALIGN_MSB BIT(14)
+
+#define PPP_DST_OUT_SEL_AXI 0
+#define PPP_DST_OUT_SEL_MDDI BIT(15)
+
+#define PPP_DST_BPP_2BYTES BIT(16)
+#define PPP_DST_BPP_3BYTES BIT(17)
+#define PPP_DST_BPP_4BYTES (BIT(17)|BIT(16))
+
+#define PPP_DST_PLANE_INTERLVD 0
+#define PPP_DST_PLANE_PLANAR BIT(18)
+#define PPP_DST_PLANE_PSEUDOPLN BIT(19)
+
+#define PPP_DST_TO_TV BIT(20)
+
+#define PPP_DST_MDDI_PRIMARY 0
+#define PPP_DST_MDDI_SECONDARY BIT(21)
+#define PPP_DST_MDDI_EXTERNAL BIT(22)
+
+/*
+ * 0x10180 DMA config
+ */
+#define DMA_DSTC0G_8BITS (BIT(1)|BIT(0))
+#define DMA_DSTC1B_8BITS (BIT(3)|BIT(2))
+#define DMA_DSTC2R_8BITS (BIT(5)|BIT(4))
+
+#define DMA_DSTC0G_6BITS BIT(1)
+#define DMA_DSTC1B_6BITS BIT(3)
+#define DMA_DSTC2R_6BITS BIT(5)
+
+#define DMA_DSTC0G_5BITS BIT(0)
+#define DMA_DSTC1B_5BITS BIT(2)
+#define DMA_DSTC2R_5BITS BIT(4)
+
+#define DMA_PACK_TIGHT BIT(6)
+#define DMA_PACK_LOOSE 0
+#define DMA_PACK_ALIGN_LSB 0
+/*
+ * use DMA_PACK_ALIGN_MSB if the upper 6 bits from 8 bits output
+ * from LCDC block maps into 6 pins out to the panel
+ */
+#define DMA_PACK_ALIGN_MSB BIT(7)
+#define DMA_PACK_PATTERN_RGB \
+ (MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 2)<<8)
+#define DMA_PACK_PATTERN_BGR \
+ (MDP_GET_PACK_PATTERN(0, CLR_B, CLR_G, CLR_R, 2)<<8)
+#define DMA_OUT_SEL_AHB 0
+#define DMA_OUT_SEL_LCDC BIT(20)
+#define DMA_IBUF_FORMAT_RGB888 0
+#define DMA_IBUF_FORMAT_xRGB8888_OR_ARGB8888 BIT(26)
+
+#ifdef CONFIG_FB_MSM_MDP22
+#define DMA_OUT_SEL_MDDI BIT(14)
+#define DMA_AHBM_LCD_SEL_PRIMARY 0
+#define DMA_AHBM_LCD_SEL_SECONDARY BIT(15)
+#define DMA_IBUF_C3ALPHA_EN BIT(16)
+#define DMA_DITHER_EN BIT(17)
+#define DMA_MDDI_DMAOUT_LCD_SEL_PRIMARY 0
+#define DMA_MDDI_DMAOUT_LCD_SEL_SECONDARY BIT(18)
+#define DMA_MDDI_DMAOUT_LCD_SEL_EXTERNAL BIT(19)
+#define DMA_IBUF_FORMAT_RGB565 BIT(20)
+#define DMA_IBUF_FORMAT_RGB888_OR_ARGB8888 0
+#define DMA_IBUF_NONCONTIGUOUS BIT(21)
+#else
+#define DMA_OUT_SEL_MDDI BIT(19)
+#define DMA_AHBM_LCD_SEL_PRIMARY 0
+#define DMA_AHBM_LCD_SEL_SECONDARY 0
+#define DMA_IBUF_C3ALPHA_EN 0
+#define DMA_DITHER_EN BIT(24)
+#define DMA_MDDI_DMAOUT_LCD_SEL_PRIMARY 0
+#define DMA_MDDI_DMAOUT_LCD_SEL_SECONDARY 0
+#define DMA_MDDI_DMAOUT_LCD_SEL_EXTERNAL 0
+#define DMA_IBUF_FORMAT_RGB565 BIT(25)
+#define DMA_IBUF_NONCONTIGUOUS 0
+#endif
+
+/*
+ * MDDI Register
+ */
+#define MDDI_VDO_PACKET_DESC 0x5666
+
+#ifdef CONFIG_FB_MSM_MDP40
+#define MDP_INTR_ENABLE (msm_mdp_base + 0x0050)
+#define MDP_INTR_STATUS (msm_mdp_base + 0x0054)
+#define MDP_INTR_CLEAR (msm_mdp_base + 0x0058)
+#define MDP_EBI2_LCD0 (msm_mdp_base + 0x0060)
+#define MDP_EBI2_LCD1 (msm_mdp_base + 0x0064)
+#define MDP_EBI2_PORTMAP_MODE (msm_mdp_base + 0x0070)
+
+#define MDP_DMA_P_HIST_INTR_STATUS (msm_mdp_base + 0x95014)
+#define MDP_DMA_P_HIST_INTR_CLEAR (msm_mdp_base + 0x95018)
+#define MDP_DMA_P_HIST_INTR_ENABLE (msm_mdp_base + 0x9501C)
+#else
+#define MDP_INTR_ENABLE (msm_mdp_base + 0x0020)
+#define MDP_INTR_STATUS (msm_mdp_base + 0x0024)
+#define MDP_INTR_CLEAR (msm_mdp_base + 0x0028)
+#define MDP_EBI2_LCD0 (msm_mdp_base + 0x003c)
+#define MDP_EBI2_LCD1 (msm_mdp_base + 0x0040)
+#define MDP_EBI2_PORTMAP_MODE (msm_mdp_base + 0x005c)
+#endif
+
+#define MDP_FULL_BYPASS_WORD43 (msm_mdp_base + 0x101ac)
+
+#define MDP_CSC_PFMVn(n) (msm_mdp_base + 0x40400 + 4 * (n))
+#define MDP_CSC_PRMVn(n) (msm_mdp_base + 0x40440 + 4 * (n))
+#define MDP_CSC_PRE_BV1n(n) (msm_mdp_base + 0x40500 + 4 * (n))
+#define MDP_CSC_PRE_BV2n(n) (msm_mdp_base + 0x40540 + 4 * (n))
+#define MDP_CSC_POST_BV1n(n) (msm_mdp_base + 0x40580 + 4 * (n))
+#define MDP_CSC_POST_BV2n(n) (msm_mdp_base + 0x405c0 + 4 * (n))
+
+#ifdef CONFIG_FB_MSM_MDP31
+#define MDP_CSC_PRE_LV1n(n) (msm_mdp_base + 0x40600 + 4 * (n))
+#define MDP_CSC_PRE_LV2n(n) (msm_mdp_base + 0x40640 + 4 * (n))
+#define MDP_CSC_POST_LV1n(n) (msm_mdp_base + 0x40680 + 4 * (n))
+#define MDP_CSC_POST_LV2n(n) (msm_mdp_base + 0x406c0 + 4 * (n))
+#define MDP_PPP_SCALE_COEFF_LSBn(n) (msm_mdp_base + 0x50400 + 8 * (n))
+#define MDP_PPP_SCALE_COEFF_MSBn(n) (msm_mdp_base + 0x50404 + 8 * (n))
+
+#define SCALE_D0_SET 0
+#define SCALE_D1_SET BIT(0)
+#define SCALE_D2_SET BIT(1)
+#define SCALE_U1_SET (BIT(0)|BIT(1))
+
+#else
+#define MDP_CSC_PRE_LV1n(n) (msm_mdp_base + 0x40580 + 4 * (n))
+#endif
+
+#define MDP_CURSOR_WIDTH 64
+#define MDP_CURSOR_HEIGHT 64
+#define MDP_CURSOR_SIZE (MDP_CURSOR_WIDTH*MDP_CURSOR_WIDTH*4)
+
+#define MDP_DMA_P_LUT_C0_EN BIT(0)
+#define MDP_DMA_P_LUT_C1_EN BIT(1)
+#define MDP_DMA_P_LUT_C2_EN BIT(2)
+#define MDP_DMA_P_LUT_POST BIT(4)
+
+void mdp_hw_init(void);
+int mdp_ppp_pipe_wait(void);
+void mdp_pipe_kickoff(uint32 term, struct msm_fb_data_type *mfd);
+void mdp_pipe_ctrl(MDP_BLOCK_TYPE block, MDP_BLOCK_POWER_STATE state,
+ boolean isr);
+void mdp_set_dma_pan_info(struct fb_info *info, struct mdp_dirty_region *dirty,
+ boolean sync);
+void mdp_dma_pan_update(struct fb_info *info);
+void mdp_refresh_screen(unsigned long data);
+int mdp_ppp_blit(struct fb_info *info, struct mdp_blit_req *req,
+ struct file **pp_src, struct file **pp_dest);
+void mdp_lcd_update_workqueue_handler(struct work_struct *work);
+void mdp_vsync_resync_workqueue_handler(struct work_struct *work);
+void mdp_dma2_update(struct msm_fb_data_type *mfd);
+void mdp_config_vsync(struct msm_fb_data_type *);
+uint32 mdp_get_lcd_line_counter(struct msm_fb_data_type *mfd);
+enum hrtimer_restart mdp_dma2_vsync_hrtimer_handler(struct hrtimer *ht);
+void mdp_set_scale(MDPIBUF *iBuf,
+ uint32 dst_roi_width,
+ uint32 dst_roi_height,
+ boolean inputRGB, boolean outputRGB, uint32 *pppop_reg_ptr);
+void mdp_init_scale_table(void);
+void mdp_adjust_start_addr(uint8 **src0,
+ uint8 **src1,
+ int v_slice,
+ int h_slice,
+ int x,
+ int y,
+ uint32 width,
+ uint32 height, int bpp, MDPIBUF *iBuf, int layer);
+void mdp_set_blend_attr(MDPIBUF *iBuf,
+ uint32 *alpha,
+ uint32 *tpVal,
+ uint32 perPixelAlpha, uint32 *pppop_reg_ptr);
+
+int mdp_dma3_on(struct platform_device *pdev);
+int mdp_dma3_off(struct platform_device *pdev);
+void mdp_dma3_update(struct msm_fb_data_type *mfd);
+
+int mdp_lcdc_on(struct platform_device *pdev);
+int mdp_lcdc_off(struct platform_device *pdev);
+void mdp_lcdc_update(struct msm_fb_data_type *mfd);
+int mdp_hw_cursor_update(struct fb_info *info, struct fb_cursor *cursor);
+void mdp_enable_irq(uint32 term);
+void mdp_disable_irq(uint32 term);
+void mdp_disable_irq_nolock(uint32 term);
+uint32_t mdp_get_bytes_per_pixel(uint32_t format);
+
+#ifdef MDP_HW_VSYNC
+void mdp_hw_vsync_clk_enable(struct msm_fb_data_type *mfd);
+void mdp_hw_vsync_clk_disable(struct msm_fb_data_type *mfd);
+#endif
+
+void mdp_dma_s_update(struct msm_fb_data_type *mfd);
+
+/* Added to support flipping */
+void mdp_set_offset_info(struct fb_info *info, uint32 address, uint32 interval);
+
+int get_gem_img(struct mdp_img *img, unsigned long *start,
+ unsigned long *len);
+int get_img(struct mdp_img *img, struct fb_info *info,
+ unsigned long *start, unsigned long *len,
+ struct file **pp_file);
+
+
+/*int get_img(struct msmfb_data *img, struct fb_info *info,
+ unsigned long *start, unsigned long *len, struct file **pp_file);*/
+#endif /* MDP_H */
diff --git a/drivers/staging/msm/mdp4.h b/drivers/staging/msm/mdp4.h
new file mode 100644
index 0000000..26ec8f1
--- /dev/null
+++ b/drivers/staging/msm/mdp4.h
@@ -0,0 +1,352 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Code Aurora nor
+ * the names of its contributors may be used to endorse or promote
+ * products derived from this software without specific prior written
+ * permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MDP4_H
+#define MDP4_H
+
+extern struct mdp_dma_data dma2_data;
+extern struct mdp_dma_data dma_s_data;
+extern struct mdp_dma_data dma_e_data;
+extern struct mdp_histogram mdp_hist;
+extern struct completion mdp_hist_comp;
+extern boolean mdp_is_in_isr;
+extern uint32 mdp_intr_mask;
+extern spinlock_t mdp_spin_lock;
+
+
+#define MDP4_NONBLOCKING /* enable non blocking ioctl */
+
+#define MDP4_OVERLAYPROC0_BASE 0x10000
+#define MDP4_OVERLAYPROC1_BASE 0x18000
+
+#define MDP4_VIDEO_BASE 0x20000
+#define MDP4_VIDEO_OFF 0x10000
+
+#define MDP4_RGB_BASE 0x40000
+#define MDP4_RGB_OFF 0x10000
+
+enum { /* display */
+ PRIMARY_INTF_SEL,
+ SECONDARY_INTF_SEL,
+ EXTERNAL_INTF_SEL
+};
+
+enum {
+ LCDC_RGB_INTF,
+ DTV_INTF = LCDC_RGB_INTF,
+ MDDI_LCDC_INTF,
+ MDDI_INTF,
+ EBI2_INTF
+};
+
+enum {
+ MDDI_PRIMARY_SET,
+ MDDI_SECONDARY_SET,
+ MDDI_EXTERNAL_SET
+};
+
+enum {
+ EBI2_LCD0,
+ EBI2_LCD1
+};
+
+enum {
+ OVERLAY_MODE_NONE,
+ OVERLAY_MODE_BLT
+};
+
+enum {
+ OVERLAY_REFRESH_ON_DEMAND,
+ OVERLAY_REFRESH_VSYNC,
+ OVERLAY_REFRESH_VSYNC_HALF,
+ OVERLAY_REFRESH_VSYNC_QUARTER
+};
+
+enum {
+ OVERLAY_FRAMEBUF,
+ OVERLAY_DIRECTOUT
+};
+
+/* system interrupts */
+#define INTR_OVERLAY0_DONE BIT(0)
+#define INTR_OVERLAY1_DONE BIT(1)
+#define INTR_DMA_S_DONE BIT(2)
+#define INTR_DMA_E_DONE BIT(3)
+#define INTR_DMA_P_DONE BIT(4)
+#define INTR_VG1_HISTOGRAM BIT(5)
+#define INTR_VG2_HISTOGRAM BIT(6)
+#define INTR_PRIMARY_VSYNC BIT(7)
+#define INTR_PRIMARY_INTF_UDERRUN BIT(8)
+#define INTR_EXTERNAL_VSYNC BIT(9)
+#define INTR_EXTERNAL_INTF_UDERRUN BIT(10)
+#define INTR_DMA_P_HISTOGRAM BIT(17)
+
+/* histogram interrupts */
+#define INTR_HIST_DONE BIT(0)
+#define INTR_HIST_RESET_SEQ_DONE BIT(1)
+
+
+#ifdef CONFIG_FB_MSM_OVERLAY
+#define MDP4_ANY_INTR_MASK (INTR_OVERLAY0_DONE)
+#else
+#define MDP4_ANY_INTR_MASK (INTR_DMA_P_DONE)
+#endif
+
+enum {
+ OVERLAY_PIPE_RGB1,
+ OVERLAY_PIPE_RGB2,
+};
+
+enum {
+ OVERLAY_PIPE_VG1, /* video/graphic */
+ OVERLAY_PIPE_VG2
+};
+
+enum {
+ OVERLAY_TYPE_RGB,
+ OVERLAY_TYPE_VG /* video/graphic */
+};
+
+enum {
+ MDP4_MIXER0,
+ MDP4_MIXER1
+};
+
+#define MDP4_MAX_MIXER 2
+
+enum {
+ OVERLAY_PLANE_INTERLEAVED,
+ OVERLAY_PLANE_PLANAR,
+ OVERLAY_PLANE_PSEUDO_PLANAR
+};
+
+enum {
+ MDP4_MIXER_STAGE_UNUNSED, /* pipe not used */
+ MDP4_MIXER_STAGE_BASE,
+ MDP4_MIXER_STAGE0, /* zorder 0 */
+ MDP4_MIXER_STAGE1, /* zorder 1 */
+ MDP4_MIXER_STAGE2 /* zorder 2 */
+};
+
+#define MDP4_MAX_STAGE 4
+
+enum {
+ MDP4_FRAME_FORMAT_LINEAR,
+ MDP4_FRAME_FORMAT_ARGB_TILE,
+ MDP4_FRAME_FORMAT_VIDEO_SUPERTILE
+};
+
+enum {
+ MDP4_CHROMA_RGB,
+ MDP4_CHROMA_H2V1,
+ MDP4_CHROMA_H1V2,
+ MDP4_CHROMA_420
+};
+
+#define MDP4_BLEND_BG_TRANSP_EN BIT(9)
+#define MDP4_BLEND_FG_TRANSP_EN BIT(8)
+#define MDP4_BLEND_BG_MOD_ALPHA BIT(7)
+#define MDP4_BLEND_BG_INV_ALPHA BIT(6)
+#define MDP4_BLEND_BG_ALPHA_FG_CONST (0 << 4)
+#define MDP4_BLEND_BG_ALPHA_BG_CONST (1 << 4)
+#define MDP4_BLEND_BG_ALPHA_FG_PIXEL (2 << 4)
+#define MDP4_BLEND_BG_ALPHA_BG_PIXEL (3 << 4)
+#define MDP4_BLEND_FG_MOD_ALPHA BIT(3)
+#define MDP4_BLEND_FG_INV_ALPHA BIT(2)
+#define MDP4_BLEND_FG_ALPHA_FG_CONST (0 << 0)
+#define MDP4_BLEND_FG_ALPHA_BG_CONST (1 << 0)
+#define MDP4_BLEND_FG_ALPHA_FG_PIXEL (2 << 0)
+#define MDP4_BLEND_FG_ALPHA_BG_PIXEL (3 << 0)
+
+#define MDP4_FORMAT_SOLID_FILL BIT(22)
+#define MDP4_FORMAT_UNPACK_ALIGN_MSB BIT(18)
+#define MDP4_FORMAT_UNPACK_TIGHT BIT(17)
+#define MDP4_FORMAT_90_ROTATED BIT(12)
+#define MDP4_FORMAT_ALPHA_ENABLE BIT(8)
+
+#define MDP4_OP_DEINT_ODD_REF BIT(19)
+#define MDP4_OP_IGC_LUT_EN BIT(16)
+#define MDP4_OP_DITHER_EN BIT(15)
+#define MDP4_OP_FLIP_UD BIT(14)
+#define MDP4_OP_FLIP_LR BIT(13)
+#define MDP4_OP_CSC_EN BIT(11)
+#define MDP4_OP_SRC_DATA_YCBCR BIT(9)
+#define MDP4_OP_SCALEY_FIR (0 << 4)
+#define MDP4_OP_SCALEY_MN_PHASE (1 << 4)
+#define MDP4_OP_SCALEY_PIXEL_RPT (2 << 4)
+#define MDP4_OP_SCALEX_FIR (0 << 2)
+#define MDP4_OP_SCALEX_MN_PHASE (1 << 2)
+#define MDP4_OP_SCALEX_PIXEL_RPT (2 << 2)
+#define MDP4_OP_SCALEY_EN BIT(1)
+#define MDP4_OP_SCALEX_EN BIT(0)
+
+#define MDP4_PIPE_PER_MIXER 2
+
+#define MDP4_MAX_PLANE 4
+
+#define MDP4_MAX_VIDEO_PIPE 2
+#define MDP4_MAX_RGB_PIPE 2
+#define MDP4_MAX_OVERLAY_PIPE 16
+
+
+struct mdp4_overlay_pipe {
+ uint32 pipe_type; /* rgb, video/graphic */
+ uint32 pipe_num;
+ uint32 pipe_ndx;
+ uint32 mixer_num; /* which mixer used */
+ uint32 mixer_stage; /* which stage of mixer used */
+ uint32 src_format;
+ uint32 src_width; /* source img width */
+ uint32 src_height; /* source img height */
+ uint32 src_w; /* roi */
+ uint32 src_h; /* roi */
+ uint32 src_x; /* roi */
+ uint32 src_y; /* roi */
+ uint32 dst_w; /* roi */
+ uint32 dst_h; /* roi */
+ uint32 dst_x; /* roi */
+ uint32 dst_y; /* roi */
+ uint32 op_mode;
+ uint32 transp;
+ uint32 blend_op;
+ uint32 phasex_step;
+ uint32 phasey_step;
+ uint32 alpha;
+ uint32 is_fg; /* control alpha & color key */
+ uint32 srcp0_addr; /* interleave, luma */
+ uint32 srcp0_ystride;
+ uint32 srcp1_addr; /* pseudoplanar, chroma plane */
+ uint32 srcp1_ystride;
+ uint32 srcp2_addr; /* planar color 2*/
+ uint32 srcp2_ystride;
+ uint32 srcp3_addr; /* alpha/color 3 */
+ uint32 srcp3_ystride;
+ uint32 fetch_plane;
+ uint32 frame_format; /* video */
+ uint32 chroma_site; /* video */
+ uint32 chroma_sample; /* video */
+ uint32 solid_fill;
+ uint32 vc1_reduce; /* video */
+ uint32 fatch_planes; /* video */
+ uint32 unpack_align_msb;/* 0 to LSB, 1 to MSB */
+ uint32 unpack_tight;/* 0 for loose, 1 for tight */
+ uint32 unpack_count;/* 0 = 1 component, 1 = 2 component ... */
+ uint32 rotated_90; /* has been rotated 90 degree */
+ uint32 bpp; /* byte per pixel */
+ uint32 alpha_enable;/* source has alpha */
+ /*
+ * number of bits for source component,
+ * 0 = 1 bit, 1 = 2 bits, 2 = 6 bits, 3 = 8 bits
+ */
+ uint32 a_bit; /* component 3, alpha */
+ uint32 r_bit; /* component 2, R_Cr */
+ uint32 b_bit; /* component 1, B_Cb */
+ uint32 g_bit; /* component 0, G_lumz */
+ /*
+ * unpack pattern
+ * A = C3, R = C2, B = C1, G = C0
+ */
+ uint32 element3; /* 0 = C0, 1 = C1, 2 = C2, 3 = C3 */
+ uint32 element2; /* 0 = C0, 1 = C1, 2 = C2, 3 = C3 */
+ uint32 element1; /* 0 = C0, 1 = C1, 2 = C2, 3 = C3 */
+ uint32 element0; /* 0 = C0, 1 = C1, 2 = C2, 3 = C3 */
+ struct completion comp;
+ struct mdp_overlay req_data;
+};
+
+void mdp4_sw_reset(unsigned long bits);
+void mdp4_display_intf_sel(int output, unsigned long intf);
+void mdp4_overlay_cfg(int layer, int blt_mode, int refresh, int direct_out);
+void mdp4_ebi2_lcd_setup(int lcd, unsigned long base, int ystride);
+void mdp4_mddi_setup(int which, unsigned long id);
+unsigned long mdp4_display_status(void);
+void mdp4_enable_clk_irq(void);
+void mdp4_disable_clk_irq(void);
+void mdp4_dma_p_update(struct msm_fb_data_type *mfd);
+void mdp4_dma_s_update(struct msm_fb_data_type *mfd);
+void mdp_pipe_ctrl(MDP_BLOCK_TYPE block, MDP_BLOCK_POWER_STATE state,
+ boolean isr);
+void mdp4_pipe_kickoff(uint32 pipe, struct msm_fb_data_type *mfd);
+int mdp4_lcdc_on(struct platform_device *pdev);
+int mdp4_lcdc_off(struct platform_device *pdev);
+void mdp4_lcdc_update(struct msm_fb_data_type *mfd);
+void mdp4_intr_clear_set(ulong clear, ulong set);
+void mdp4_dma_p_cfg(void);
+void mdp4_hw_init(void);
+void mdp4_isr_read(int);
+void mdp4_clear_lcdc(void);
+void mdp4_mixer_blend_init(int mixer_num);
+void mdp4_vg_qseed_init(int vg_num);
+void mdp4_vg_csc_mv_setup(int vp_num);
+void mdp4_vg_csc_pre_bv_setup(int vp_num);
+void mdp4_vg_csc_post_bv_setup(int vp_num);
+void mdp4_vg_csc_pre_lv_setup(int vp_num);
+void mdp4_vg_csc_post_lv_setup(int vp_num);
+irqreturn_t mdp4_isr(int irq, void *ptr);
+void mdp4_overlay_format_to_pipe(uint32 format, struct mdp4_overlay_pipe *pipe);
+uint32 mdp4_overlay_format(struct mdp4_overlay_pipe *pipe);
+uint32 mdp4_overlay_unpack_pattern(struct mdp4_overlay_pipe *pipe);
+uint32 mdp4_overlay_op_mode(struct mdp4_overlay_pipe *pipe);
+void mdp4_lcdc_overlay(struct msm_fb_data_type *mfd);
+void mdp4_overlay_rgb_setup(struct mdp4_overlay_pipe *pipe);
+void mdp4_overlay_reg_flush(struct mdp4_overlay_pipe *pipe, int all);
+void mdp4_mixer_blend_setup(struct mdp4_overlay_pipe *pipe);
+void mdp4_mixer_stage_up(struct mdp4_overlay_pipe *pipe);
+void mdp4_mixer_stage_down(struct mdp4_overlay_pipe *pipe);
+int mdp4_mixer_stage_can_run(struct mdp4_overlay_pipe *pipe);
+void mdp4_overlayproc_cfg(struct mdp4_overlay_pipe *pipe);
+void mdp4_mddi_overlay(struct msm_fb_data_type *mfd);
+int mdp4_overlay_format2type(uint32 format);
+int mdp4_overlay_format2pipe(struct mdp4_overlay_pipe *pipe);
+int mdp4_overlay_get(struct fb_info *info, struct mdp_overlay *req);
+int mdp4_overlay_set(struct fb_info *info, struct mdp_overlay *req);
+int mdp4_overlay_unset(struct fb_info *info, int ndx);
+int mdp4_overlay_play(struct fb_info *info, struct msmfb_overlay_data *req,
+ struct file **pp_src_file);
+struct mdp4_overlay_pipe *mdp4_overlay_pipe_alloc(void);
+void mdp4_overlay_pipe_free(struct mdp4_overlay_pipe *pipe);
+void mdp4_overlay_dmap_cfg(struct msm_fb_data_type *mfd, int lcdc);
+void mdp4_overlay_dmap_xy(struct mdp4_overlay_pipe *pipe);
+int mdp4_overlay_active(int mixer);
+void mdp4_overlay0_done_lcdc(void);
+void mdp4_overlay0_done_mddi(void);
+void mdp4_mddi_overlay_restore(void);
+void mdp4_mddi_overlay_kickoff(struct msm_fb_data_type *mfd,
+ struct mdp4_overlay_pipe *pipe);
+void mdp4_rgb_igc_lut_setup(int num);
+void mdp4_vg_igc_lut_setup(int num);
+void mdp4_mixer_gc_lut_setup(int mixer_num);
+
+#ifdef CONFIG_DEBUG_FS
+int mdp4_debugfs_init(void);
+#endif
+
+int mdp_ppp_blit(struct fb_info *info, struct mdp_blit_req *req,
+ struct file **pp_src_file, struct file **pp_dst_file);
+
+#endif /* MDP_H */
diff --git a/drivers/staging/msm/mdp4_debugfs.c b/drivers/staging/msm/mdp4_debugfs.c
new file mode 100644
index 0000000..844d467
--- /dev/null
+++ b/drivers/staging/msm/mdp4_debugfs.c
@@ -0,0 +1,181 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/hrtimer.h>
+#include <linux/clk.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mdp4.h"
+
+
+#define MDP4_DEBUG_BUF 128
+
+
+static char mdp4_debug_buf[MDP4_DEBUG_BUF];
+static ulong mdp4_debug_offset;
+static ulong mdp4_base_addr;
+
+static int mdp4_offset_set(void *data, u64 val)
+{
+ mdp4_debug_offset = (int)val;
+ return 0;
+}
+
+static int mdp4_offset_get(void *data, u64 *val)
+{
+ *val = (u64)mdp4_debug_offset;
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(
+ mdp4_offset_fops,
+ mdp4_offset_get,
+ mdp4_offset_set,
+ "%llx\n");
+
+
+static int mdp4_debugfs_open(struct inode *inode, struct file *file)
+{
+ /* non-seekable */
+ file->f_mode &= ~(FMODE_LSEEK | FMODE_PREAD | FMODE_PWRITE);
+ return 0;
+}
+
+static int mdp4_debugfs_release(struct inode *inode, struct file *file)
+{
+ return 0;
+}
+
+static ssize_t mdp4_debugfs_write(
+ struct file *file,
+ const char __user *buff,
+ size_t count,
+ loff_t *ppos)
+{
+ int cnt;
+ unsigned int data;
+
+ printk(KERN_INFO "%s: offset=%d count=%d *ppos=%d\n",
+ __func__, (int)mdp4_debug_offset, (int)count, (int)*ppos);
+
+ if (count > sizeof(mdp4_debug_buf))
+ return -EFAULT;
+
+ if (copy_from_user(mdp4_debug_buf, buff, count))
+ return -EFAULT;
+
+
+ mdp4_debug_buf[count] = 0; /* end of string */
+
+ cnt = sscanf(mdp4_debug_buf, "%x", &data);
+ if (cnt < 1) {
+ printk(KERN_ERR "%s: sscanf failed cnt=%d" , __func__, cnt);
+ return -EINVAL;
+ }
+
+ writel(&data, mdp4_base_addr + mdp4_debug_offset);
+
+ return 0;
+}
+
+static ssize_t mdp4_debugfs_read(
+ struct file *file,
+ char __user *buff,
+ size_t count,
+ loff_t *ppos)
+{
+ int len = 0;
+ unsigned int data;
+
+ printk(KERN_INFO "%s: offset=%d count=%d *ppos=%d\n",
+ __func__, (int)mdp4_debug_offset, (int)count, (int)*ppos);
+
+ if (*ppos)
+ return 0; /* the end */
+
+ data = readl(mdp4_base_addr + mdp4_debug_offset);
+
+ len = snprintf(mdp4_debug_buf, 4, "%x\n", data);
+
+ if (len > 0) {
+ if (len > count)
+ len = count;
+ if (copy_to_user(buff, mdp4_debug_buf, len))
+ return -EFAULT;
+ }
+
+ printk(KERN_INFO "%s: len=%d\n", __func__, len);
+
+ if (len < 0)
+ return 0;
+
+ *ppos += len; /* increase offset */
+
+ return len;
+}
+
+static const struct file_operations mdp4_debugfs_fops = {
+ .open = mdp4_debugfs_open,
+ .release = mdp4_debugfs_release,
+ .read = mdp4_debugfs_read,
+ .write = mdp4_debugfs_write,
+};
+
+int mdp4_debugfs_init(void)
+{
+ struct dentry *dent = debugfs_create_dir("mdp4", NULL);
+
+ if (IS_ERR(dent)) {
+ printk(KERN_ERR "%s(%d): debugfs_create_dir fail, error %ld\n",
+ __FILE__, __LINE__, PTR_ERR(dent));
+ return -1;
+ }
+
+ if (debugfs_create_file("offset", 0644, dent, 0, &mdp4_offset_fops)
+ == NULL) {
+ printk(KERN_ERR "%s(%d): debugfs_create_file: offset fail\n",
+ __FILE__, __LINE__);
+ return -1;
+ }
+
+ if (debugfs_create_file("regs", 0644, dent, 0, &mdp4_debugfs_fops)
+ == NULL) {
+ printk(KERN_ERR "%s(%d): debugfs_create_file: regs fail\n",
+ __FILE__, __LINE__);
+ return -1;
+ }
+
+ mdp4_debug_offset = 0;
+ mdp4_base_addr = (ulong) msm_mdp_base; /* defined at msm_fb_def.h */
+
+ return 0;
+}
diff --git a/drivers/staging/msm/mdp4_overlay.c b/drivers/staging/msm/mdp4_overlay.c
new file mode 100644
index 0000000..304bb82
--- /dev/null
+++ b/drivers/staging/msm/mdp4_overlay.c
@@ -0,0 +1,1259 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/hrtimer.h>
+#include <linux/clk.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+#include <linux/fb.h>
+#include <msm_mdp.h>
+#include <linux/file.h>
+#include "android_pmem.h"
+#include <linux/major.h>
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/mutex.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mdp4.h"
+
+
+struct mdp4_overlay_ctrl {
+ struct mdp4_overlay_pipe plist[MDP4_MAX_OVERLAY_PIPE];
+ struct mdp4_overlay_pipe *stage[MDP4_MAX_MIXER][MDP4_MAX_STAGE];
+} mdp4_overlay_db;
+
+static struct mdp4_overlay_ctrl *ctrl = &mdp4_overlay_db;
+
+
+void mdp4_overlay_dmap_cfg(struct msm_fb_data_type *mfd, int lcdc)
+{
+ uint32 dma2_cfg_reg;
+
+ dma2_cfg_reg = DMA_DITHER_EN;
+
+ if (mfd->fb_imgType == MDP_BGR_565)
+ dma2_cfg_reg |= DMA_PACK_PATTERN_BGR;
+ else
+ dma2_cfg_reg |= DMA_PACK_PATTERN_RGB;
+
+
+ if (mfd->panel_info.bpp == 18) {
+ dma2_cfg_reg |= DMA_DSTC0G_6BITS | /* 666 18BPP */
+ DMA_DSTC1B_6BITS | DMA_DSTC2R_6BITS;
+ } else if (mfd->panel_info.bpp == 16) {
+ dma2_cfg_reg |= DMA_DSTC0G_6BITS | /* 565 16BPP */
+ DMA_DSTC1B_5BITS | DMA_DSTC2R_5BITS;
+ } else {
+ dma2_cfg_reg |= DMA_DSTC0G_8BITS | /* 888 16BPP */
+ DMA_DSTC1B_8BITS | DMA_DSTC2R_8BITS;
+ }
+
+ if (lcdc)
+ dma2_cfg_reg |= DMA_PACK_ALIGN_MSB;
+
+ /* dma2 config register */
+ MDP_OUTP(MDP_BASE + 0x90000, dma2_cfg_reg);
+
+}
+
+void mdp4_overlay_dmap_xy(struct mdp4_overlay_pipe *pipe)
+{
+
+ /* dma_p source */
+ MDP_OUTP(MDP_BASE + 0x90004,
+ (pipe->src_height << 16 | pipe->src_width));
+ MDP_OUTP(MDP_BASE + 0x90008, pipe->srcp0_addr);
+ MDP_OUTP(MDP_BASE + 0x9000c, pipe->srcp0_ystride);
+
+ /* dma_p dest */
+ MDP_OUTP(MDP_BASE + 0x90010, (pipe->dst_y << 16 | pipe->dst_x));
+}
+
+#define MDP4_VG_PHASE_STEP_DEFAULT 0x20000000
+#define MDP4_VG_PHASE_STEP_SHIFT 29
+
+static int mdp4_leading_0(uint32 num)
+{
+ uint32 bit = 0x80000000;
+ int i;
+
+ for (i = 0; i < 32; i++) {
+ if (bit & num)
+ return i;
+ bit >>= 1;
+ }
+
+ return i;
+}
+
+static uint32 mdp4_scale_phase_step(int f_num, uint32 src, uint32 dst)
+{
+ uint32 val;
+ int n;
+
+ n = mdp4_leading_0(src);
+ if (n > f_num)
+ n = f_num;
+ val = src << n; /* maximum to reduce lose of resolution */
+ val /= dst;
+ if (n < f_num) {
+ n = f_num - n;
+ val <<= n;
+ }
+
+ return val;
+}
+
+static void mdp4_scale_setup(struct mdp4_overlay_pipe *pipe)
+{
+
+ pipe->phasex_step = MDP4_VG_PHASE_STEP_DEFAULT;
+ pipe->phasey_step = MDP4_VG_PHASE_STEP_DEFAULT;
+
+ if (pipe->dst_h && pipe->src_h != pipe->dst_h) {
+ if (pipe->dst_h >= pipe->src_h * 8) /* too much */
+ return;
+ pipe->op_mode |= MDP4_OP_SCALEY_EN;
+
+ if (pipe->pipe_type == OVERLAY_TYPE_VG) {
+ if (pipe->dst_h <= (pipe->src_h / 4))
+ pipe->op_mode |= MDP4_OP_SCALEY_MN_PHASE;
+ else
+ pipe->op_mode |= MDP4_OP_SCALEY_FIR;
+ }
+
+ pipe->phasey_step = mdp4_scale_phase_step(29,
+ pipe->src_h, pipe->dst_h);
+ }
+
+ if (pipe->dst_w && pipe->src_w != pipe->dst_w) {
+ if (pipe->dst_w >= pipe->src_w * 8) /* too much */
+ return;
+ pipe->op_mode |= MDP4_OP_SCALEX_EN;
+
+ if (pipe->pipe_type == OVERLAY_TYPE_VG) {
+ if (pipe->dst_w <= (pipe->src_w / 4))
+ pipe->op_mode |= MDP4_OP_SCALEY_MN_PHASE;
+ else
+ pipe->op_mode |= MDP4_OP_SCALEY_FIR;
+ }
+
+ pipe->phasex_step = mdp4_scale_phase_step(29,
+ pipe->src_w, pipe->dst_w);
+ }
+}
+
+void mdp4_overlay_rgb_setup(struct mdp4_overlay_pipe *pipe)
+{
+ char *rgb_base;
+ uint32 src_size, src_xy, dst_size, dst_xy;
+ uint32 format, pattern;
+
+ rgb_base = MDP_BASE + MDP4_RGB_BASE;
+ rgb_base += (MDP4_RGB_OFF * pipe->pipe_num);
+
+ src_size = ((pipe->src_h << 16) | pipe->src_w);
+ src_xy = ((pipe->src_y << 16) | pipe->src_x);
+ dst_size = ((pipe->dst_h << 16) | pipe->dst_w);
+ dst_xy = ((pipe->dst_y << 16) | pipe->dst_x);
+
+ format = mdp4_overlay_format(pipe);
+ pattern = mdp4_overlay_unpack_pattern(pipe);
+
+ pipe->op_mode |= MDP4_OP_IGC_LUT_EN;
+
+ mdp4_scale_setup(pipe);
+
+ outpdw(rgb_base + 0x0000, src_size); /* MDP_RGB_SRC_SIZE */
+ outpdw(rgb_base + 0x0004, src_xy); /* MDP_RGB_SRC_XY */
+ outpdw(rgb_base + 0x0008, dst_size); /* MDP_RGB_DST_SIZE */
+ outpdw(rgb_base + 0x000c, dst_xy); /* MDP_RGB_DST_XY */
+
+ outpdw(rgb_base + 0x0010, pipe->srcp0_addr);
+ outpdw(rgb_base + 0x0040, pipe->srcp0_ystride);
+
+ outpdw(rgb_base + 0x0050, format);/* MDP_RGB_SRC_FORMAT */
+ outpdw(rgb_base + 0x0054, pattern);/* MDP_RGB_SRC_UNPACK_PATTERN */
+ outpdw(rgb_base + 0x0058, pipe->op_mode);/* MDP_RGB_OP_MODE */
+ outpdw(rgb_base + 0x005c, pipe->phasex_step);
+ outpdw(rgb_base + 0x0060, pipe->phasey_step);
+
+ /* 16 bytes-burst x 3 req <= 48 bytes */
+ outpdw(rgb_base + 0x1004, 0xc2); /* MDP_RGB_FETCH_CFG */
+}
+
+void mdp4_overlay_vg_setup(struct mdp4_overlay_pipe *pipe)
+{
+ char *vg_base;
+ uint32 frame_size, src_size, src_xy, dst_size, dst_xy;
+ uint32 format, pattern;
+
+ vg_base = MDP_BASE + MDP4_VIDEO_BASE;
+ vg_base += (MDP4_VIDEO_OFF * pipe->pipe_num);
+
+ frame_size = ((pipe->src_height << 16) | pipe->src_width);
+ src_size = ((pipe->src_h << 16) | pipe->src_w);
+ src_xy = ((pipe->src_y << 16) | pipe->src_x);
+ dst_size = ((pipe->dst_h << 16) | pipe->dst_w);
+ dst_xy = ((pipe->dst_y << 16) | pipe->dst_x);
+
+ format = mdp4_overlay_format(pipe);
+ pattern = mdp4_overlay_unpack_pattern(pipe);
+
+ pipe->op_mode |= (MDP4_OP_CSC_EN | MDP4_OP_SRC_DATA_YCBCR |
+ MDP4_OP_IGC_LUT_EN);
+
+ mdp4_scale_setup(pipe);
+
+ outpdw(vg_base + 0x0000, src_size); /* MDP_RGB_SRC_SIZE */
+ outpdw(vg_base + 0x0004, src_xy); /* MDP_RGB_SRC_XY */
+ outpdw(vg_base + 0x0008, dst_size); /* MDP_RGB_DST_SIZE */
+ outpdw(vg_base + 0x000c, dst_xy); /* MDP_RGB_DST_XY */
+ outpdw(vg_base + 0x0048, frame_size); /* TILE frame size */
+
+ /* luma component plane */
+ outpdw(vg_base + 0x0010, pipe->srcp0_addr);
+
+ /* chroma component plane */
+ outpdw(vg_base + 0x0014, pipe->srcp1_addr);
+
+ outpdw(vg_base + 0x0040,
+ pipe->srcp1_ystride << 16 | pipe->srcp0_ystride);
+
+ outpdw(vg_base + 0x0050, format); /* MDP_RGB_SRC_FORMAT */
+ outpdw(vg_base + 0x0054, pattern); /* MDP_RGB_SRC_UNPACK_PATTERN */
+ outpdw(vg_base + 0x0058, pipe->op_mode);/* MDP_RGB_OP_MODE */
+ outpdw(vg_base + 0x005c, pipe->phasex_step);
+ outpdw(vg_base + 0x0060, pipe->phasey_step);
+
+ if (pipe->op_mode & MDP4_OP_DITHER_EN) {
+ outpdw(vg_base + 0x0068,
+ pipe->r_bit << 4 | pipe->b_bit << 2 | pipe->g_bit);
+ }
+
+ /* 16 bytes-burst x 3 req <= 48 bytes */
+ outpdw(vg_base + 0x1004, 0xc2); /* MDP_VG_FETCH_CFG */
+}
+
+int mdp4_overlay_format2type(uint32 format)
+{
+ switch (format) {
+ case MDP_RGB_565:
+ case MDP_RGB_888:
+ case MDP_BGR_565:
+ case MDP_ARGB_8888:
+ case MDP_RGBA_8888:
+ case MDP_BGRA_8888:
+ return OVERLAY_TYPE_RGB;
+ case MDP_YCRYCB_H2V1:
+ case MDP_Y_CRCB_H2V1:
+ case MDP_Y_CBCR_H2V1:
+ case MDP_Y_CRCB_H2V2:
+ case MDP_Y_CBCR_H2V2:
+ case MDP_Y_CBCR_H2V2_TILE:
+ case MDP_Y_CRCB_H2V2_TILE:
+ return OVERLAY_TYPE_VG;
+ default:
+ return -ERANGE;
+ }
+
+}
+
+#define C3_ALPHA 3 /* alpha */
+#define C2_R_Cr 2 /* R/Cr */
+#define C1_B_Cb 1 /* B/Cb */
+#define C0_G_Y 0 /* G/luma */
+
+int mdp4_overlay_format2pipe(struct mdp4_overlay_pipe *pipe)
+{
+ switch (pipe->src_format) {
+ case MDP_RGB_565:
+ pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+ pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+ pipe->a_bit = 0;
+ pipe->r_bit = 1; /* R, 5 bits */
+ pipe->b_bit = 1; /* B, 5 bits */
+ pipe->g_bit = 2; /* G, 6 bits */
+ pipe->alpha_enable = 0;
+ pipe->unpack_tight = 1;
+ pipe->unpack_align_msb = 0;
+ pipe->unpack_count = 2;
+ pipe->element2 = C2_R_Cr; /* R */
+ pipe->element1 = C0_G_Y; /* G */
+ pipe->element0 = C1_B_Cb; /* B */
+ pipe->bpp = 2; /* 2 bpp */
+ break;
+ case MDP_RGB_888:
+ pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+ pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+ pipe->a_bit = 0;
+ pipe->r_bit = 3; /* R, 8 bits */
+ pipe->b_bit = 3; /* B, 8 bits */
+ pipe->g_bit = 3; /* G, 8 bits */
+ pipe->alpha_enable = 0;
+ pipe->unpack_tight = 1;
+ pipe->unpack_align_msb = 0;
+ pipe->unpack_count = 2;
+ pipe->element2 = C2_R_Cr; /* R */
+ pipe->element1 = C0_G_Y; /* G */
+ pipe->element0 = C1_B_Cb; /* B */
+ pipe->bpp = 3; /* 3 bpp */
+ break;
+ case MDP_BGR_565:
+ pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+ pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+ pipe->a_bit = 0;
+ pipe->r_bit = 1; /* R, 5 bits */
+ pipe->b_bit = 1; /* B, 5 bits */
+ pipe->g_bit = 2; /* G, 6 bits */
+ pipe->alpha_enable = 0;
+ pipe->unpack_tight = 1;
+ pipe->unpack_align_msb = 0;
+ pipe->unpack_count = 2;
+ pipe->element2 = C1_B_Cb; /* B */
+ pipe->element1 = C0_G_Y; /* G */
+ pipe->element0 = C2_R_Cr; /* R */
+ pipe->bpp = 2; /* 2 bpp */
+ break;
+ case MDP_ARGB_8888:
+ pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+ pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+ pipe->a_bit = 3; /* alpha, 4 bits */
+ pipe->r_bit = 3; /* R, 8 bits */
+ pipe->b_bit = 3; /* B, 8 bits */
+ pipe->g_bit = 3; /* G, 8 bits */
+ pipe->alpha_enable = 1;
+ pipe->unpack_tight = 1;
+ pipe->unpack_align_msb = 0;
+ pipe->unpack_count = 3;
+ pipe->element3 = C3_ALPHA; /* alpha */
+ pipe->element2 = C2_R_Cr; /* R */
+ pipe->element1 = C0_G_Y; /* G */
+ pipe->element0 = C1_B_Cb; /* B */
+ pipe->bpp = 4; /* 4 bpp */
+ break;
+ case MDP_RGBA_8888:
+ pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+ pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+ pipe->a_bit = 3; /* alpha, 4 bits */
+ pipe->r_bit = 3; /* R, 8 bits */
+ pipe->b_bit = 3; /* B, 8 bits */
+ pipe->g_bit = 3; /* G, 8 bits */
+ pipe->alpha_enable = 1;
+ pipe->unpack_tight = 1;
+ pipe->unpack_align_msb = 0;
+ pipe->unpack_count = 3;
+ pipe->element3 = C2_R_Cr; /* R */
+ pipe->element2 = C0_G_Y; /* G */
+ pipe->element1 = C1_B_Cb; /* B */
+ pipe->element0 = C3_ALPHA; /* alpha */
+ pipe->bpp = 4; /* 4 bpp */
+ break;
+ case MDP_BGRA_8888:
+ pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+ pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+ pipe->a_bit = 3; /* alpha, 4 bits */
+ pipe->r_bit = 3; /* R, 8 bits */
+ pipe->b_bit = 3; /* B, 8 bits */
+ pipe->g_bit = 3; /* G, 8 bits */
+ pipe->alpha_enable = 1;
+ pipe->unpack_tight = 1;
+ pipe->unpack_align_msb = 0;
+ pipe->unpack_count = 3;
+ pipe->element3 = C1_B_Cb; /* B */
+ pipe->element2 = C0_G_Y; /* G */
+ pipe->element1 = C2_R_Cr; /* R */
+ pipe->element0 = C3_ALPHA; /* alpha */
+ pipe->bpp = 4; /* 4 bpp */
+ break;
+ case MDP_YCRYCB_H2V1:
+ pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+ pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+ pipe->a_bit = 0; /* alpha, 4 bits */
+ pipe->r_bit = 3; /* R, 8 bits */
+ pipe->b_bit = 3; /* B, 8 bits */
+ pipe->g_bit = 3; /* G, 8 bits */
+ pipe->alpha_enable = 0;
+ pipe->unpack_tight = 1;
+ pipe->unpack_align_msb = 0;
+ pipe->unpack_count = 3;
+ pipe->element3 = C0_G_Y; /* G */
+ pipe->element2 = C2_R_Cr; /* R */
+ pipe->element1 = C0_G_Y; /* G */
+ pipe->element0 = C1_B_Cb; /* B */
+ pipe->bpp = 2; /* 2 bpp */
+ pipe->chroma_sample = MDP4_CHROMA_H2V1;
+ break;
+ case MDP_Y_CRCB_H2V1:
+ case MDP_Y_CBCR_H2V1:
+ case MDP_Y_CRCB_H2V2:
+ case MDP_Y_CBCR_H2V2:
+ pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+ pipe->fetch_plane = OVERLAY_PLANE_PSEUDO_PLANAR;
+ pipe->a_bit = 0;
+ pipe->r_bit = 3; /* R, 8 bits */
+ pipe->b_bit = 3; /* B, 8 bits */
+ pipe->g_bit = 3; /* G, 8 bits */
+ pipe->alpha_enable = 0;
+ pipe->unpack_tight = 1;
+ pipe->unpack_align_msb = 0;
+ pipe->unpack_count = 1; /* 2 */
+ pipe->element3 = C0_G_Y; /* not used */
+ pipe->element2 = C0_G_Y; /* not used */
+ if (pipe->src_format == MDP_Y_CRCB_H2V1) {
+ pipe->element1 = C2_R_Cr; /* R */
+ pipe->element0 = C1_B_Cb; /* B */
+ pipe->chroma_sample = MDP4_CHROMA_H2V1;
+ } else if (pipe->src_format == MDP_Y_CBCR_H2V1) {
+ pipe->element1 = C1_B_Cb; /* B */
+ pipe->element0 = C2_R_Cr; /* R */
+ pipe->chroma_sample = MDP4_CHROMA_H2V1;
+ } else if (pipe->src_format == MDP_Y_CRCB_H2V2) {
+ pipe->element1 = C2_R_Cr; /* R */
+ pipe->element0 = C1_B_Cb; /* B */
+ pipe->chroma_sample = MDP4_CHROMA_420;
+ } else if (pipe->src_format == MDP_Y_CBCR_H2V2) {
+ pipe->element1 = C1_B_Cb; /* B */
+ pipe->element0 = C2_R_Cr; /* R */
+ pipe->chroma_sample = MDP4_CHROMA_420;
+ }
+ pipe->bpp = 2; /* 2 bpp */
+ break;
+ case MDP_Y_CBCR_H2V2_TILE:
+ case MDP_Y_CRCB_H2V2_TILE:
+ pipe->frame_format = MDP4_FRAME_FORMAT_VIDEO_SUPERTILE;
+ pipe->fetch_plane = OVERLAY_PLANE_PSEUDO_PLANAR;
+ pipe->a_bit = 0;
+ pipe->r_bit = 3; /* R, 8 bits */
+ pipe->b_bit = 3; /* B, 8 bits */
+ pipe->g_bit = 3; /* G, 8 bits */
+ pipe->alpha_enable = 0;
+ pipe->unpack_tight = 1;
+ pipe->unpack_align_msb = 0;
+ pipe->unpack_count = 1; /* 2 */
+ pipe->element3 = C0_G_Y; /* not used */
+ pipe->element2 = C0_G_Y; /* not used */
+ if (pipe->src_format == MDP_Y_CRCB_H2V2_TILE) {
+ pipe->element1 = C2_R_Cr; /* R */
+ pipe->element0 = C1_B_Cb; /* B */
+ pipe->chroma_sample = MDP4_CHROMA_420;
+ } else if (pipe->src_format == MDP_Y_CBCR_H2V2_TILE) {
+ pipe->element1 = C1_B_Cb; /* B */
+ pipe->element0 = C2_R_Cr; /* R */
+ pipe->chroma_sample = MDP4_CHROMA_420;
+ }
+ pipe->bpp = 2; /* 2 bpp */
+ break;
+ default:
+ /* not likely */
+ return -ERANGE;
+ }
+
+ return 0;
+}
+
+/*
+ * color_key_convert: output with 12 bits color key
+ */
+static uint32 color_key_convert(int start, int num, uint32 color)
+{
+
+ uint32 data;
+
+ data = (color >> start) & ((1 << num) - 1);
+
+ if (num == 5)
+ data = (data << 7) + (data << 2) + (data >> 3);
+ else if (num == 6)
+ data = (data << 6) + data;
+ else /* 8 bits */
+ data = (data << 4) + (data >> 4);
+
+ return data;
+
+}
+
+void transp_color_key(int format, uint32 transp,
+ uint32 *c0, uint32 *c1, uint32 *c2)
+{
+ int b_start, g_start, r_start;
+ int b_num, g_num, r_num;
+
+ switch (format) {
+ case MDP_RGB_565:
+ b_start = 0;
+ g_start = 5;
+ r_start = 11;
+ r_num = 5;
+ g_num = 6;
+ b_num = 5;
+ break;
+ case MDP_RGB_888:
+ case MDP_XRGB_8888:
+ case MDP_ARGB_8888:
+ b_start = 0;
+ g_start = 8;
+ r_start = 16;
+ r_num = 8;
+ g_num = 8;
+ b_num = 8;
+ break;
+ case MDP_BGR_565:
+ b_start = 11;
+ g_start = 5;
+ r_start = 0;
+ r_num = 5;
+ g_num = 6;
+ b_num = 5;
+ break;
+ case MDP_Y_CBCR_H2V2:
+ case MDP_Y_CBCR_H2V1:
+ b_start = 8;
+ g_start = 16;
+ r_start = 0;
+ r_num = 8;
+ g_num = 8;
+ b_num = 8;
+ break;
+ case MDP_Y_CRCB_H2V2:
+ case MDP_Y_CRCB_H2V1:
+ b_start = 0;
+ g_start = 16;
+ r_start = 8;
+ r_num = 8;
+ g_num = 8;
+ b_num = 8;
+ break;
+ default:
+ b_start = 0;
+ g_start = 8;
+ r_start = 16;
+ r_num = 8;
+ g_num = 8;
+ b_num = 8;
+ break;
+ }
+
+ *c0 = color_key_convert(g_start, g_num, transp);
+ *c1 = color_key_convert(b_start, b_num, transp);
+ *c2 = color_key_convert(r_start, r_num, transp);
+}
+
+uint32 mdp4_overlay_format(struct mdp4_overlay_pipe *pipe)
+{
+ uint32 format;
+
+ format = 0;
+
+ if (pipe->solid_fill)
+ format |= MDP4_FORMAT_SOLID_FILL;
+
+ if (pipe->unpack_align_msb)
+ format |= MDP4_FORMAT_UNPACK_ALIGN_MSB;
+
+ if (pipe->unpack_tight)
+ format |= MDP4_FORMAT_UNPACK_TIGHT;
+
+ if (pipe->alpha_enable)
+ format |= MDP4_FORMAT_ALPHA_ENABLE;
+
+ format |= (pipe->unpack_count << 13);
+ format |= ((pipe->bpp - 1) << 9);
+ format |= (pipe->a_bit << 6);
+ format |= (pipe->r_bit << 4);
+ format |= (pipe->b_bit << 2);
+ format |= pipe->g_bit;
+
+ format |= (pipe->frame_format << 29);
+
+ if (pipe->fetch_plane == OVERLAY_PLANE_PSEUDO_PLANAR) {
+ /* video/graphic */
+ format |= (pipe->fetch_plane << 19);
+ format |= (pipe->chroma_site << 28);
+ format |= (pipe->chroma_sample << 26);
+ }
+
+ return format;
+}
+
+uint32 mdp4_overlay_unpack_pattern(struct mdp4_overlay_pipe *pipe)
+{
+ return (pipe->element3 << 24) | (pipe->element2 << 16) |
+ (pipe->element1 << 8) | pipe->element0;
+}
+
+void mdp4_overlayproc_cfg(struct mdp4_overlay_pipe *pipe)
+{
+ uint32 data;
+ char *overlay_base;
+
+ if (pipe->mixer_num == MDP4_MIXER1)
+ overlay_base = MDP_BASE + MDP4_OVERLAYPROC1_BASE;/* 0x18000 */
+ else
+ overlay_base = MDP_BASE + MDP4_OVERLAYPROC0_BASE;/* 0x10000 */
+
+ /* MDP_OVERLAYPROC_CFG */
+ outpdw(overlay_base + 0x0004, 0x01); /* directout */
+ data = pipe->src_height;
+ data <<= 16;
+ data |= pipe->src_width;
+ outpdw(overlay_base + 0x0008, data); /* ROI, height + width */
+ outpdw(overlay_base + 0x000c, pipe->srcp0_addr);
+ outpdw(overlay_base + 0x0010, pipe->srcp0_ystride);
+ outpdw(overlay_base + 0x0014, 0x4); /* GC_LUT_EN, 888 */
+}
+
+int mdp4_overlay_active(int mixer)
+{
+ uint32 data, mask, i;
+ int p1, p2;
+
+ data = inpdw(MDP_BASE + 0x10100);
+ p1 = 0;
+ p2 = 0;
+ for (i = 0; i < 8; i++) {
+ mask = data & 0x0f;
+ if (mask) {
+ if (mask <= 4)
+ p1++;
+ else
+ p2++;
+ }
+ data >>= 4;
+ }
+
+ if (mixer)
+ return p2;
+ else
+ return p1;
+}
+
+void mdp4_mixer_stage_up(struct mdp4_overlay_pipe *pipe)
+{
+ uint32 data, mask, snum, stage, mixer;
+
+ stage = pipe->mixer_stage;
+ mixer = pipe->mixer_num;
+
+ /* MDP_LAYERMIXER_IN_CFG, shard by both mixer 0 and 1 */
+ data = inpdw(MDP_BASE + 0x10100);
+
+ if (mixer == MDP4_MIXER1)
+ stage += 8;
+
+ if (pipe->pipe_type == OVERLAY_TYPE_VG) {/* VG1 and VG2 */
+ snum = 0;
+ snum += (4 * pipe->pipe_num);
+ } else {
+ snum = 8;
+ snum += (4 * pipe->pipe_num); /* RGB1 and RGB2 */
+ }
+
+ mask = 0x0f;
+ mask <<= snum;
+ stage <<= snum;
+ data &= ~mask; /* clear old bits */
+
+ data |= stage;
+
+ outpdw(MDP_BASE + 0x10100, data); /* MDP_LAYERMIXER_IN_CFG */
+
+ data = inpdw(MDP_BASE + 0x10100);
+
+ ctrl->stage[pipe->mixer_num][pipe->mixer_stage] = pipe; /* keep it */
+}
+
+void mdp4_mixer_stage_down(struct mdp4_overlay_pipe *pipe)
+{
+ uint32 data, mask, snum, stage, mixer;
+
+ stage = pipe->mixer_stage;
+ mixer = pipe->mixer_num;
+
+ if (pipe != ctrl->stage[mixer][stage]) /* not runing */
+ return;
+
+ /* MDP_LAYERMIXER_IN_CFG, shard by both mixer 0 and 1 */
+ data = inpdw(MDP_BASE + 0x10100);
+
+ if (mixer == MDP4_MIXER1)
+ stage += 8;
+
+ if (pipe->pipe_type == OVERLAY_TYPE_VG) {/* VG1 and VG2 */
+ snum = 0;
+ snum += (4 * pipe->pipe_num);
+ } else {
+ snum = 8;
+ snum += (4 * pipe->pipe_num); /* RGB1 and RGB2 */
+ }
+
+ mask = 0x0f;
+ mask <<= snum;
+ data &= ~mask; /* clear old bits */
+
+ outpdw(MDP_BASE + 0x10100, data); /* MDP_LAYERMIXER_IN_CFG */
+
+ data = inpdw(MDP_BASE + 0x10100);
+
+ ctrl->stage[pipe->mixer_num][pipe->mixer_stage] = NULL; /* clear it */
+}
+
+void mdp4_mixer_blend_setup(struct mdp4_overlay_pipe *pipe)
+{
+ unsigned char *overlay_base;
+ uint32 c0, c1, c2, blend_op;
+ int off;
+
+ if (pipe->mixer_num) /* mixer number, /dev/fb0, /dev/fb1 */
+ overlay_base = MDP_BASE + MDP4_OVERLAYPROC1_BASE;/* 0x18000 */
+ else
+ overlay_base = MDP_BASE + MDP4_OVERLAYPROC0_BASE;/* 0x10000 */
+
+ /* stage 0 to stage 2 */
+ off = 0x20 * (pipe->mixer_stage - MDP4_MIXER_STAGE0);
+
+ blend_op = 0;
+ if (pipe->alpha_enable) /* ARGB */
+ blend_op = MDP4_BLEND_FG_ALPHA_FG_PIXEL |
+ MDP4_BLEND_BG_ALPHA_FG_PIXEL;
+ else
+ blend_op = (MDP4_BLEND_BG_ALPHA_BG_CONST |
+ MDP4_BLEND_FG_ALPHA_FG_CONST);
+
+
+ if (pipe->alpha_enable == 0) { /* not ARGB */
+ if (pipe->is_fg) {
+ outpdw(overlay_base + off + 0x108, pipe->alpha);
+ outpdw(overlay_base + off + 0x10c, 0xff - pipe->alpha);
+ } else {
+ outpdw(overlay_base + off + 0x108, 0xff - pipe->alpha);
+ outpdw(overlay_base + off + 0x10c, pipe->alpha);
+ }
+ }
+
+ if (pipe->transp != MDP_TRANSP_NOP) {
+ transp_color_key(pipe->src_format, pipe->transp, &c0, &c1, &c2);
+ if (pipe->is_fg) {
+ blend_op |= MDP4_BLEND_FG_TRANSP_EN; /* Fg blocked */
+ /* lower limit */
+ if (c0 > 0x10)
+ c0 -= 0x10;
+ if (c1 > 0x10)
+ c1 -= 0x10;
+ if (c2 > 0x10)
+ c2 -= 0x10;
+ outpdw(overlay_base + off + 0x110,
+ (c1 << 16 | c0));/* low */
+ outpdw(overlay_base + off + 0x114, c2);/* low */
+ /* upper limit */
+ if ((c0 + 0x20) < 0x0fff)
+ c0 += 0x20;
+ else
+ c0 = 0x0fff;
+ if ((c1 + 0x20) < 0x0fff)
+ c1 += 0x20;
+ else
+ c1 = 0x0fff;
+ if ((c2 + 0x20) < 0x0fff)
+ c2 += 0x20;
+ else
+ c2 = 0x0fff;
+ outpdw(overlay_base + off + 0x118,
+ (c1 << 16 | c0));/* high */
+ outpdw(overlay_base + off + 0x11c, c2);/* high */
+ } else {
+ blend_op |= MDP4_BLEND_BG_TRANSP_EN; /* bg blocked */
+ /* lower limit */
+ if (c0 > 0x10)
+ c0 -= 0x10;
+ if (c1 > 0x10)
+ c1 -= 0x10;
+ if (c2 > 0x10)
+ c2 -= 0x10;
+ outpdw(overlay_base + 0x180,
+ (c1 << 16 | c0));/* low */
+ outpdw(overlay_base + 0x184, c2);/* low */
+ /* upper limit */
+ if ((c0 + 0x20) < 0x0fff)
+ c0 += 0x20;
+ else
+ c0 = 0x0fff;
+ if ((c1 + 0x20) < 0x0fff)
+ c1 += 0x20;
+ else
+ c1 = 0x0fff;
+ if ((c2 + 0x20) < 0x0fff)
+ c2 += 0x20;
+ else
+ c2 = 0x0fff;
+ outpdw(overlay_base + 0x188,
+ (c1 << 16 | c0));/* high */
+ outpdw(overlay_base + 0x18c, c2);/* high */
+ }
+ }
+ outpdw(overlay_base + off + 0x104, blend_op);
+}
+
+void mdp4_overlay_reg_flush(struct mdp4_overlay_pipe *pipe, int all)
+{
+ uint32 bits = 0;
+
+ if (pipe->mixer_num == MDP4_MIXER1)
+ bits |= 0x02;
+ else
+ bits |= 0x01;
+
+ if (all) {
+ if (pipe->pipe_type == OVERLAY_TYPE_RGB) {
+ if (pipe->pipe_num == OVERLAY_PIPE_RGB2)
+ bits |= 0x20;
+ else
+ bits |= 0x10;
+ } else {
+ if (pipe->pipe_num == OVERLAY_PIPE_VG2)
+ bits |= 0x08;
+ else
+ bits |= 0x04;
+ }
+ }
+
+ outpdw(MDP_BASE + 0x18000, bits); /* MDP_OVERLAY_REG_FLUSH */
+
+ while (inpdw(MDP_BASE + 0x18000) & bits) /* self clear when complete */
+ ;
+}
+
+struct mdp4_overlay_pipe *mdp4_overlay_ndx2pipe(int ndx)
+{
+ struct mdp4_overlay_pipe *pipe;
+
+ if (ndx == 0 || ndx >= MDP4_MAX_OVERLAY_PIPE)
+ return NULL;
+
+ pipe = &ctrl->plist[ndx - 1]; /* ndx start from 1 */
+
+ if (pipe->pipe_ndx == 0)
+ return NULL;
+
+ return pipe;
+}
+
+struct mdp4_overlay_pipe *mdp4_overlay_pipe_alloc(void)
+{
+ int i;
+ struct mdp4_overlay_pipe *pipe;
+
+ pipe = &ctrl->plist[0];
+ for (i = 0; i < MDP4_MAX_OVERLAY_PIPE; i++) {
+ if (pipe->pipe_ndx == 0) {
+ pipe->pipe_ndx = i + 1; /* start from 1 */
+ init_completion(&pipe->comp);
+ printk(KERN_INFO "mdp4_overlay_pipe_alloc: pipe=%x ndx=%d\n",
+ (int)pipe, pipe->pipe_ndx);
+ return pipe;
+ }
+ pipe++;
+ }
+
+ return NULL;
+}
+
+
+void mdp4_overlay_pipe_free(struct mdp4_overlay_pipe *pipe)
+{
+ printk(KERN_INFO "mdp4_overlay_pipe_free: pipe=%x ndx=%d\n",
+ (int)pipe, pipe->pipe_ndx);
+ memset(pipe, 0, sizeof(*pipe));
+}
+
+static int get_pipe_num(int ptype, int stage)
+{
+ if (ptype == OVERLAY_TYPE_RGB) {
+ if (stage == MDP4_MIXER_STAGE_BASE)
+ return OVERLAY_PIPE_RGB1;
+ else
+ return OVERLAY_PIPE_RGB2;
+ } else {
+ if (stage == MDP4_MIXER_STAGE0)
+ return OVERLAY_PIPE_VG1;
+ else
+ return OVERLAY_PIPE_VG2;
+ }
+}
+
+int mdp4_overlay_req_check(uint32 id, uint32 z_order, uint32 mixer)
+{
+ struct mdp4_overlay_pipe *pipe;
+
+ pipe = ctrl->stage[mixer][z_order];
+
+ if (pipe == NULL)
+ return 0;
+
+ if (pipe->pipe_ndx == id) /* same req, recycle */
+ return 0;
+
+ return -EPERM;
+}
+
+static int mdp4_overlay_req2pipe(struct mdp_overlay *req, int mixer,
+ struct mdp4_overlay_pipe **ppipe)
+{
+ struct mdp4_overlay_pipe *pipe;
+ int ret, ptype;
+
+ if (mixer >= MDP4_MAX_MIXER) {
+ printk(KERN_ERR "mpd_overlay_req2pipe: mixer out of range!\n");
+ return -ERANGE;
+ }
+
+ if (req->z_order < 0 || req->z_order > 2) {
+ printk(KERN_ERR "mpd_overlay_req2pipe: z_order=%d out of range!\n",
+ req->z_order);
+ return -ERANGE;
+ }
+
+ if (req->src_rect.h == 0 || req->src_rect.w == 0) {
+ printk(KERN_ERR "mpd_overlay_req2pipe: src img of zero size!\n");
+ return -EINVAL;
+ }
+
+ ret = mdp4_overlay_req_check(req->id, req->z_order, mixer);
+ if (ret < 0)
+ return ret;
+
+ ptype = mdp4_overlay_format2type(req->src.format);
+ if (ptype < 0)
+ return ptype;
+
+ if (req->id == MSMFB_NEW_REQUEST) /* new request */
+ pipe = mdp4_overlay_pipe_alloc();
+ else
+ pipe = mdp4_overlay_ndx2pipe(req->id);
+
+ if (pipe == NULL)
+ return -ENOMEM;
+
+ pipe->src_format = req->src.format;
+ ret = mdp4_overlay_format2pipe(pipe);
+
+ if (ret < 0)
+ return ret;
+
+ /*
+ * base layer == 1, reserved for frame buffer
+ * zorder 0 == stage 0 == 2
+ * zorder 1 == stage 1 == 3
+ * zorder 2 == stage 2 == 4
+ */
+ if (req->id == MSMFB_NEW_REQUEST) { /* new request */
+ pipe->mixer_stage = req->z_order + MDP4_MIXER_STAGE0;
+ pipe->pipe_type = ptype;
+ pipe->pipe_num = get_pipe_num(ptype, pipe->mixer_stage);
+ printk(KERN_INFO "mpd4_overlay_req2pipe: zorder=%d pipe_num=%d\n",
+ req->z_order, pipe->pipe_num);
+ }
+
+ pipe->src_width = req->src.width & 0x07ff; /* source img width */
+ pipe->src_height = req->src.height & 0x07ff; /* source img height */
+ pipe->src_h = req->src_rect.h & 0x07ff;
+ pipe->src_w = req->src_rect.w & 0x07ff;
+ pipe->src_y = req->src_rect.y & 0x07ff;
+ pipe->src_x = req->src_rect.x & 0x07ff;
+ pipe->dst_h = req->dst_rect.h & 0x07ff;
+ pipe->dst_w = req->dst_rect.w & 0x07ff;
+ pipe->dst_y = req->dst_rect.y & 0x07ff;
+ pipe->dst_x = req->dst_rect.x & 0x07ff;
+
+ if (req->flags & MDP_FLIP_LR)
+ pipe->op_mode |= MDP4_OP_FLIP_LR;
+
+ if (req->flags & MDP_FLIP_UD)
+ pipe->op_mode |= MDP4_OP_FLIP_UD;
+
+ if (req->flags & MDP_DITHER)
+ pipe->op_mode |= MDP4_OP_DITHER_EN;
+
+ if (req->flags & MDP_DEINTERLACE)
+ pipe->op_mode |= MDP4_OP_DEINT_ODD_REF;
+
+ pipe->is_fg = req->is_fg;/* control alpha and color key */
+
+ pipe->alpha = req->alpha & 0x0ff;
+
+ pipe->transp = req->transp_mask;
+
+ *ppipe = pipe;
+
+ return 0;
+}
+
+int get_img(struct msmfb_data *img, struct fb_info *info,
+ unsigned long *start, unsigned long *len, struct file **pp_file)
+{
+ int put_needed, ret = 0;
+ struct file *file;
+#ifdef CONFIG_ANDROID_PMEM
+ unsigned long vstart;
+#endif
+
+#ifdef CONFIG_ANDROID_PMEM
+ if (!get_pmem_file(img->memory_id, start, &vstart, len, pp_file))
+ return 0;
+#endif
+ file = fget_light(img->memory_id, &put_needed);
+ if (file == NULL)
+ return -1;
+
+ if (MAJOR(file->f_dentry->d_inode->i_rdev) == FB_MAJOR) {
+ *start = info->fix.smem_start;
+ *len = info->fix.smem_len;
+ *pp_file = file;
+ } else {
+ ret = -1;
+ fput_light(file, put_needed);
+ }
+ return ret;
+}
+int mdp4_overlay_get(struct fb_info *info, struct mdp_overlay *req)
+{
+ struct mdp4_overlay_pipe *pipe;
+
+ pipe = mdp4_overlay_ndx2pipe(req->id);
+ if (pipe == NULL)
+ return -ENODEV;
+
+ *req = pipe->req_data;
+
+ return 0;
+}
+
+int mdp4_overlay_set(struct fb_info *info, struct mdp_overlay *req)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+ int ret, mixer;
+ struct mdp4_overlay_pipe *pipe;
+ int lcdc;
+
+ if (mfd == NULL)
+ return -ENODEV;
+
+ if (req->src.format == MDP_FB_FORMAT)
+ req->src.format = mfd->fb_imgType;
+
+ if (mutex_lock_interruptible(&mfd->dma->ov_mutex))
+ return -EINTR;
+
+ mixer = info->node; /* minor number of char device */
+
+ ret = mdp4_overlay_req2pipe(req, mixer, &pipe);
+ if (ret < 0) {
+ mutex_unlock(&mfd->dma->ov_mutex);
+ return ret;
+ }
+
+ lcdc = inpdw(MDP_BASE + 0xc0000);
+
+ if (lcdc == 0) { /* mddi */
+ /* MDP cmd block enable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+ }
+
+ /* return id back to user */
+ req->id = pipe->pipe_ndx; /* pipe_ndx start from 1 */
+ pipe->req_data = *req; /* keep original req */
+
+ mutex_unlock(&mfd->dma->ov_mutex);
+
+ return 0;
+}
+
+int mdp4_overlay_unset(struct fb_info *info, int ndx)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+ struct mdp4_overlay_pipe *pipe;
+ int lcdc;
+
+ if (mfd == NULL)
+ return -ENODEV;
+
+ if (mutex_lock_interruptible(&mfd->dma->ov_mutex))
+ return -EINTR;
+
+ pipe = mdp4_overlay_ndx2pipe(ndx);
+
+ if (pipe == NULL) {
+ mutex_unlock(&mfd->dma->ov_mutex);
+ return -ENODEV;
+ }
+
+ lcdc = inpdw(MDP_BASE + 0xc0000);
+
+ mdp4_mixer_stage_down(pipe);
+
+ if (lcdc == 0) { /* mddi */
+ /* MDP cmd block disable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+ }
+
+ if (lcdc) /* LCDC mode */
+ mdp4_overlay_reg_flush(pipe, 0);
+
+ mdp4_overlay_pipe_free(pipe);
+
+ if (lcdc == 0) { /* mddi */
+ mdp4_mddi_overlay_restore();
+ }
+
+ mutex_unlock(&mfd->dma->ov_mutex);
+
+ return 0;
+}
+
+struct tile_desc {
+ uint32 width; /* tile's width */
+ uint32 height; /* tile's height */
+ uint32 row_tile_w; /* tiles per row's width */
+ uint32 row_tile_h; /* tiles per row's height */
+};
+
+void tile_samsung(struct tile_desc *tp)
+{
+ /*
+ * each row of samsung tile consists of two tiles in height
+ * and two tiles in width which means width should align to
+ * 64 x 2 bytes and height should align to 32 x 2 bytes.
+ * video decoder generate two tiles in width and one tile
+ * in height which ends up height align to 32 X 1 bytes.
+ */
+ tp->width = 64; /* 64 bytes */
+ tp->row_tile_w = 2; /* 2 tiles per row's width */
+ tp->height = 32; /* 32 bytes */
+ tp->row_tile_h = 1; /* 1 tiles per row's height */
+}
+
+uint32 tile_mem_size(struct mdp4_overlay_pipe *pipe, struct tile_desc *tp)
+{
+ uint32 tile_w, tile_h;
+ uint32 row_num_w, row_num_h;
+
+
+ tile_w = tp->width * tp->row_tile_w;
+ tile_h = tp->height * tp->row_tile_h;
+
+ row_num_w = (pipe->src_width + tile_w - 1) / tile_w;
+ row_num_h = (pipe->src_height + tile_h - 1) / tile_h;
+
+ return row_num_w * row_num_h * tile_w * tile_h;
+}
+
+int mdp4_overlay_play(struct fb_info *info, struct msmfb_overlay_data *req,
+ struct file **pp_src_file)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+ struct msmfb_data *img;
+ struct mdp4_overlay_pipe *pipe;
+ ulong start, addr;
+ ulong len = 0;
+ struct file *p_src_file = 0;
+ int lcdc;
+
+ if (mfd == NULL)
+ return -ENODEV;
+
+ pipe = mdp4_overlay_ndx2pipe(req->id);
+ if (pipe == NULL)
+ return -ENODEV;
+
+ if (mutex_lock_interruptible(&mfd->dma->ov_mutex))
+ return -EINTR;
+
+ img = &req->data;
+ get_img(img, info, &start, &len, &p_src_file);
+ if (len == 0) {
+ mutex_unlock(&mfd->dma->ov_mutex);
+ printk(KERN_ERR "mdp_overlay_play: could not retrieve"
+ " image from memory\n");
+ return -1;
+ }
+ *pp_src_file = p_src_file;
+
+ addr = start + img->offset;
+ pipe->srcp0_addr = addr;
+ pipe->srcp0_ystride = pipe->src_width * pipe->bpp;
+
+ if (pipe->fetch_plane == OVERLAY_PLANE_PSEUDO_PLANAR) {
+ if (pipe->frame_format == MDP4_FRAME_FORMAT_VIDEO_SUPERTILE) {
+ struct tile_desc tile;
+
+ tile_samsung(&tile);
+ pipe->srcp1_addr = addr + tile_mem_size(pipe, &tile);
+ } else
+ pipe->srcp1_addr = addr +
+ pipe->src_width * pipe->src_height;
+
+ pipe->srcp0_ystride = pipe->src_width;
+ pipe->srcp1_ystride = pipe->src_width;
+ }
+
+ lcdc = inpdw(MDP_BASE + 0xc0000);
+ lcdc &= 0x01; /* LCDC mode */
+
+ if (pipe->pipe_type == OVERLAY_TYPE_VG)
+ mdp4_overlay_vg_setup(pipe); /* video/graphic pipe */
+ else
+ mdp4_overlay_rgb_setup(pipe); /* rgb pipe */
+
+ mdp4_mixer_blend_setup(pipe);
+ mdp4_mixer_stage_up(pipe);
+
+ if (lcdc) { /* LCDC mode */
+ mdp4_overlay_reg_flush(pipe, 1);
+ }
+
+ if (lcdc) { /* LCDC mode */
+ if (pipe->mixer_stage != MDP4_MIXER_STAGE_BASE) { /* done */
+ mutex_unlock(&mfd->dma->ov_mutex);
+ return 0;
+ }
+ }
+
+ if (lcdc == 0) { /* MDDI mode */
+#ifdef MDP4_NONBLOCKING
+ if (mfd->panel_power_on)
+#else
+ if (!mfd->dma->busy && mfd->panel_power_on)
+#endif
+ mdp4_mddi_overlay_kickoff(mfd, pipe);
+ }
+
+ mutex_unlock(&mfd->dma->ov_mutex);
+
+ return 0;
+}
diff --git a/drivers/staging/msm/mdp4_overlay_lcdc.c b/drivers/staging/msm/mdp4_overlay_lcdc.c
new file mode 100644
index 0000000..a6ab8ec
--- /dev/null
+++ b/drivers/staging/msm/mdp4_overlay_lcdc.c
@@ -0,0 +1,313 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mdp4.h"
+
+#ifdef CONFIG_FB_MSM_MDP40
+#define LCDC_BASE 0xC0000
+#else
+#define LCDC_BASE 0xE0000
+#endif
+
+int first_pixel_start_x;
+int first_pixel_start_y;
+
+static struct mdp4_overlay_pipe *lcdc_pipe;
+
+int mdp_lcdc_on(struct platform_device *pdev)
+{
+ int lcdc_width;
+ int lcdc_height;
+ int lcdc_bpp;
+ int lcdc_border_clr;
+ int lcdc_underflow_clr;
+ int lcdc_hsync_skew;
+
+ int hsync_period;
+ int hsync_ctrl;
+ int vsync_period;
+ int display_hctl;
+ int display_v_start;
+ int display_v_end;
+ int active_hctl;
+ int active_h_start;
+ int active_h_end;
+ int active_v_start;
+ int active_v_end;
+ int ctrl_polarity;
+ int h_back_porch;
+ int h_front_porch;
+ int v_back_porch;
+ int v_front_porch;
+ int hsync_pulse_width;
+ int vsync_pulse_width;
+ int hsync_polarity;
+ int vsync_polarity;
+ int data_en_polarity;
+ int hsync_start_x;
+ int hsync_end_x;
+ uint8 *buf;
+ int bpp, ptype;
+ uint32 format;
+ struct fb_info *fbi;
+ struct fb_var_screeninfo *var;
+ struct msm_fb_data_type *mfd;
+ struct mdp4_overlay_pipe *pipe;
+ int ret;
+
+ mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+ if (!mfd)
+ return -ENODEV;
+
+ if (mfd->key != MFD_KEY)
+ return -EINVAL;
+
+ fbi = mfd->fbi;
+ var = &fbi->var;
+
+ /* MDP cmd block enable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+ bpp = fbi->var.bits_per_pixel / 8;
+ buf = (uint8 *) fbi->fix.smem_start;
+ buf += fbi->var.xoffset * bpp +
+ fbi->var.yoffset * fbi->fix.line_length;
+
+ if (bpp == 2)
+ format = MDP_RGB_565;
+ else if (bpp == 3)
+ format = MDP_RGB_888;
+ else
+ format = MDP_ARGB_8888;
+
+
+ if (lcdc_pipe == NULL) {
+ ptype = mdp4_overlay_format2type(format);
+ pipe = mdp4_overlay_pipe_alloc();
+ pipe->pipe_type = ptype;
+ /* use RGB1 pipe */
+ pipe->pipe_num = OVERLAY_PIPE_RGB1;
+ pipe->mixer_stage = MDP4_MIXER_STAGE_BASE;
+ pipe->mixer_num = MDP4_MIXER0;
+ pipe->src_format = format;
+ mdp4_overlay_format2pipe(pipe);
+
+ lcdc_pipe = pipe; /* keep it */
+ } else {
+ pipe = lcdc_pipe;
+ }
+
+ pipe->src_height = fbi->var.yres;
+ pipe->src_width = fbi->var.xres;
+ pipe->src_h = fbi->var.yres;
+ pipe->src_w = fbi->var.xres;
+ pipe->src_y = 0;
+ pipe->src_x = 0;
+ pipe->srcp0_addr = (uint32) buf;
+ pipe->srcp0_ystride = fbi->fix.line_length;
+
+ mdp4_overlay_dmap_xy(pipe);
+ mdp4_overlay_dmap_cfg(mfd, 1);
+
+ mdp4_overlay_rgb_setup(pipe);
+
+ mdp4_mixer_stage_up(pipe);
+
+ mdp4_overlayproc_cfg(pipe);
+
+ /*
+ * LCDC timing setting
+ */
+ h_back_porch = var->left_margin;
+ h_front_porch = var->right_margin;
+ v_back_porch = var->upper_margin;
+ v_front_porch = var->lower_margin;
+ hsync_pulse_width = var->hsync_len;
+ vsync_pulse_width = var->vsync_len;
+ lcdc_border_clr = mfd->panel_info.lcdc.border_clr;
+ lcdc_underflow_clr = mfd->panel_info.lcdc.underflow_clr;
+ lcdc_hsync_skew = mfd->panel_info.lcdc.hsync_skew;
+
+ lcdc_width = mfd->panel_info.xres;
+ lcdc_height = mfd->panel_info.yres;
+ lcdc_bpp = mfd->panel_info.bpp;
+
+ hsync_period =
+ hsync_pulse_width + h_back_porch + lcdc_width + h_front_porch;
+ hsync_ctrl = (hsync_period << 16) | hsync_pulse_width;
+ hsync_start_x = hsync_pulse_width + h_back_porch;
+ hsync_end_x = hsync_period - h_front_porch - 1;
+ display_hctl = (hsync_end_x << 16) | hsync_start_x;
+
+ vsync_period =
+ (vsync_pulse_width + v_back_porch + lcdc_height +
+ v_front_porch) * hsync_period;
+ display_v_start =
+ (vsync_pulse_width + v_back_porch) * hsync_period + lcdc_hsync_skew;
+ display_v_end =
+ vsync_period - (v_front_porch * hsync_period) + lcdc_hsync_skew - 1;
+
+ if (lcdc_width != var->xres) {
+ active_h_start = hsync_start_x + first_pixel_start_x;
+ active_h_end = active_h_start + var->xres - 1;
+ active_hctl =
+ ACTIVE_START_X_EN | (active_h_end << 16) | active_h_start;
+ } else {
+ active_hctl = 0;
+ }
+
+ if (lcdc_height != var->yres) {
+ active_v_start =
+ display_v_start + first_pixel_start_y * hsync_period;
+ active_v_end = active_v_start + (var->yres) * hsync_period - 1;
+ active_v_start |= ACTIVE_START_Y_EN;
+ } else {
+ active_v_start = 0;
+ active_v_end = 0;
+ }
+
+
+#ifdef CONFIG_FB_MSM_MDP40
+ hsync_polarity = 1;
+ vsync_polarity = 1;
+ lcdc_underflow_clr |= 0x80000000; /* enable recovery */
+#else
+ hsync_polarity = 0;
+ vsync_polarity = 0;
+#endif
+ data_en_polarity = 0;
+
+ ctrl_polarity =
+ (data_en_polarity << 2) | (vsync_polarity << 1) | (hsync_polarity);
+
+ MDP_OUTP(MDP_BASE + LCDC_BASE + 0x4, hsync_ctrl);
+ MDP_OUTP(MDP_BASE + LCDC_BASE + 0x8, vsync_period);
+ MDP_OUTP(MDP_BASE + LCDC_BASE + 0xc, vsync_pulse_width * hsync_period);
+ MDP_OUTP(MDP_BASE + LCDC_BASE + 0x10, display_hctl);
+ MDP_OUTP(MDP_BASE + LCDC_BASE + 0x14, display_v_start);
+ MDP_OUTP(MDP_BASE + LCDC_BASE + 0x18, display_v_end);
+ MDP_OUTP(MDP_BASE + LCDC_BASE + 0x28, lcdc_border_clr);
+ MDP_OUTP(MDP_BASE + LCDC_BASE + 0x2c, lcdc_underflow_clr);
+ MDP_OUTP(MDP_BASE + LCDC_BASE + 0x30, lcdc_hsync_skew);
+ MDP_OUTP(MDP_BASE + LCDC_BASE + 0x38, ctrl_polarity);
+ MDP_OUTP(MDP_BASE + LCDC_BASE + 0x1c, active_hctl);
+ MDP_OUTP(MDP_BASE + LCDC_BASE + 0x20, active_v_start);
+ MDP_OUTP(MDP_BASE + LCDC_BASE + 0x24, active_v_end);
+
+ ret = panel_next_on(pdev);
+ if (ret == 0) {
+ /* enable LCDC block */
+ MDP_OUTP(MDP_BASE + LCDC_BASE, 1);
+ mdp_pipe_ctrl(MDP_DMA2_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+ }
+ /* MDP cmd block disable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+ return ret;
+}
+
+int mdp_lcdc_off(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct mdp4_overlay_pipe *pipe;
+
+ /* MDP cmd block enable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+ MDP_OUTP(MDP_BASE + LCDC_BASE, 0);
+ /* MDP cmd block disable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+ mdp_pipe_ctrl(MDP_DMA2_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+ ret = panel_next_off(pdev);
+
+ /* delay to make sure the last frame finishes */
+ mdelay(100);
+
+ /* dis-engage rgb0 from mixer */
+ pipe = lcdc_pipe;
+ mdp4_mixer_stage_down(pipe);
+
+ return ret;
+}
+
+/*
+ * mdp4_overlay0_done_lcdc: called from isr
+ */
+void mdp4_overlay0_done_lcdc()
+{
+ complete(&lcdc_pipe->comp);
+}
+
+void mdp4_lcdc_overlay(struct msm_fb_data_type *mfd)
+{
+ struct fb_info *fbi = mfd->fbi;
+ uint8 *buf;
+ int bpp;
+ unsigned long flag;
+ struct mdp4_overlay_pipe *pipe;
+
+ if (!mfd->panel_power_on)
+ return;
+
+ /* no need to power on cmd block since it's lcdc mode */
+ bpp = fbi->var.bits_per_pixel / 8;
+ buf = (uint8 *) fbi->fix.smem_start;
+ buf += fbi->var.xoffset * bpp +
+ fbi->var.yoffset * fbi->fix.line_length;
+
+ mutex_lock(&mfd->dma->ov_mutex);
+
+ pipe = lcdc_pipe;
+ pipe->srcp0_addr = (uint32) buf;
+ mdp4_overlay_rgb_setup(pipe);
+ mdp4_overlay_reg_flush(pipe, 1); /* rgb1 and mixer0 */
+
+ /* enable irq */
+ spin_lock_irqsave(&mdp_spin_lock, flag);
+ mdp_enable_irq(MDP_OVERLAY0_TERM);
+ INIT_COMPLETION(lcdc_pipe->comp);
+ mfd->dma->waiting = TRUE;
+ outp32(MDP_INTR_CLEAR, INTR_OVERLAY0_DONE);
+ mdp_intr_mask |= INTR_OVERLAY0_DONE;
+ outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+ spin_unlock_irqrestore(&mdp_spin_lock, flag);
+ wait_for_completion_killable(&lcdc_pipe->comp);
+ mdp_disable_irq(MDP_OVERLAY0_TERM);
+
+ mutex_unlock(&mfd->dma->ov_mutex);
+}
diff --git a/drivers/staging/msm/mdp4_overlay_mddi.c b/drivers/staging/msm/mdp4_overlay_mddi.c
new file mode 100644
index 0000000..be1b287
--- /dev/null
+++ b/drivers/staging/msm/mdp4_overlay_mddi.c
@@ -0,0 +1,254 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mdp4.h"
+
+static struct mdp4_overlay_pipe *mddi_pipe;
+static struct mdp4_overlay_pipe *pending_pipe;
+static struct msm_fb_data_type *mddi_mfd;
+
+#define WHOLESCREEN
+
+void mdp4_overlay_update_lcd(struct msm_fb_data_type *mfd)
+{
+ MDPIBUF *iBuf = &mfd->ibuf;
+ uint8 *src;
+ int bpp, ptype;
+ uint32 format;
+ uint32 mddi_ld_param;
+ uint16 mddi_vdo_packet_reg;
+ struct mdp4_overlay_pipe *pipe;
+
+ if (mfd->key != MFD_KEY)
+ return;
+
+ mddi_mfd = mfd; /* keep it */
+
+ bpp = iBuf->bpp;
+
+ if (bpp == 2)
+ format = MDP_RGB_565;
+ else if (bpp == 3)
+ format = MDP_RGB_888;
+ else
+ format = MDP_ARGB_8888;
+
+ /* MDP cmd block enable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+ if (mddi_pipe == NULL) {
+ ptype = mdp4_overlay_format2type(format);
+ pipe = mdp4_overlay_pipe_alloc();
+ pipe->pipe_type = ptype;
+ /* use RGB1 pipe */
+ pipe->pipe_num = OVERLAY_PIPE_RGB1;
+ pipe->mixer_num = MDP4_MIXER0;
+ pipe->src_format = format;
+ mdp4_overlay_format2pipe(pipe);
+
+ mddi_pipe = pipe; /* keep it */
+
+ mddi_ld_param = 0;
+ mddi_vdo_packet_reg = mfd->panel_info.mddi.vdopkt;
+
+ if (mfd->panel_info.type == MDDI_PANEL) {
+ if (mfd->panel_info.pdest == DISPLAY_1)
+ mddi_ld_param = 0;
+ else
+ mddi_ld_param = 1;
+ } else {
+ mddi_ld_param = 2;
+ }
+
+ MDP_OUTP(MDP_BASE + 0x00090, mddi_ld_param);
+ MDP_OUTP(MDP_BASE + 0x00094,
+ (MDDI_VDO_PACKET_DESC << 16) | mddi_vdo_packet_reg);
+ } else {
+ pipe = mddi_pipe;
+ }
+
+
+ src = (uint8 *) iBuf->buf;
+
+#ifdef WHOLESCREEN
+ {
+ struct fb_info *fbi;
+
+ fbi = mfd->fbi;
+ pipe->src_height = fbi->var.yres;
+ pipe->src_width = fbi->var.xres;
+ pipe->src_h = fbi->var.yres;
+ pipe->src_w = fbi->var.xres;
+ pipe->src_y = 0;
+ pipe->src_x = 0;
+ pipe->dst_h = fbi->var.yres;
+ pipe->dst_w = fbi->var.xres;
+ pipe->dst_y = 0;
+ pipe->dst_x = 0;
+ pipe->srcp0_addr = (uint32)src;
+ pipe->srcp0_ystride = fbi->var.xres_virtual * bpp;
+ }
+
+#else
+ if (mdp4_overlay_active(MDP4_MIXER0)) {
+ struct fb_info *fbi;
+
+ fbi = mfd->fbi;
+ pipe->src_height = fbi->var.yres;
+ pipe->src_width = fbi->var.xres;
+ pipe->src_h = fbi->var.yres;
+ pipe->src_w = fbi->var.xres;
+ pipe->src_y = 0;
+ pipe->src_x = 0;
+ pipe->dst_h = fbi->var.yres;
+ pipe->dst_w = fbi->var.xres;
+ pipe->dst_y = 0;
+ pipe->dst_x = 0;
+ pipe->srcp0_addr = (uint32) src;
+ pipe->srcp0_ystride = fbi->var.xres_virtual * bpp;
+ } else {
+ /* starting input address */
+ src += (iBuf->dma_x + iBuf->dma_y * iBuf->ibuf_width) * bpp;
+
+ pipe->src_height = iBuf->dma_h;
+ pipe->src_width = iBuf->dma_w;
+ pipe->src_h = iBuf->dma_h;
+ pipe->src_w = iBuf->dma_w;
+ pipe->src_y = 0;
+ pipe->src_x = 0;
+ pipe->dst_h = iBuf->dma_h;
+ pipe->dst_w = iBuf->dma_w;
+ pipe->dst_y = iBuf->dma_y;
+ pipe->dst_x = iBuf->dma_x;
+ pipe->srcp0_addr = (uint32) src;
+ pipe->srcp0_ystride = iBuf->ibuf_width * bpp;
+ }
+#endif
+
+ pipe->mixer_stage = MDP4_MIXER_STAGE_BASE;
+
+ mdp4_overlay_rgb_setup(pipe);
+
+ mdp4_mixer_stage_up(pipe);
+
+ mdp4_overlayproc_cfg(pipe);
+
+ mdp4_overlay_dmap_xy(pipe);
+
+ mdp4_overlay_dmap_cfg(mfd, 0);
+
+ /* MDP cmd block disable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+}
+
+/*
+ * mdp4_overlay0_done_mddi: called from isr
+ */
+void mdp4_overlay0_done_mddi()
+{
+ if (pending_pipe)
+ complete(&pending_pipe->comp);
+}
+
+void mdp4_mddi_overlay_restore(void)
+{
+ /* mutex holded by caller */
+ mdp4_overlay_update_lcd(mddi_mfd);
+ mdp4_mddi_overlay_kickoff(mddi_mfd, mddi_pipe);
+}
+
+void mdp4_mddi_overlay_kickoff(struct msm_fb_data_type *mfd,
+ struct mdp4_overlay_pipe *pipe)
+{
+#ifdef MDP4_NONBLOCKING
+ unsigned long flag;
+
+ spin_lock_irqsave(&mdp_spin_lock, flag);
+ if (mfd->dma->busy == TRUE) {
+ INIT_COMPLETION(pipe->comp);
+ pending_pipe = pipe;
+ }
+ spin_unlock_irqrestore(&mdp_spin_lock, flag);
+
+ if (pending_pipe != NULL) {
+ /* wait until DMA finishes the current job */
+ wait_for_completion_killable(&pipe->comp);
+ pending_pipe = NULL;
+ }
+ down(&mfd->sem);
+ mdp_enable_irq(MDP_OVERLAY0_TERM);
+ mfd->dma->busy = TRUE;
+ /* start OVERLAY pipe */
+ mdp_pipe_kickoff(MDP_OVERLAY0_TERM, mfd);
+ up(&mfd->sem);
+#else
+ down(&mfd->sem);
+ mdp_enable_irq(MDP_OVERLAY0_TERM);
+ mfd->dma->busy = TRUE;
+ INIT_COMPLETION(pipe->comp);
+ pending_pipe = pipe;
+
+ /* start OVERLAY pipe */
+ mdp_pipe_kickoff(MDP_OVERLAY0_TERM, mfd);
+ up(&mfd->sem);
+
+ /* wait until DMA finishes the current job */
+ wait_for_completion_killable(&pipe->comp);
+ mdp_disable_irq(MDP_OVERLAY0_TERM);
+#endif
+
+}
+
+void mdp4_mddi_overlay(struct msm_fb_data_type *mfd)
+{
+ mutex_lock(&mfd->dma->ov_mutex);
+
+ if ((mfd) && (!mfd->dma->busy) && (mfd->panel_power_on)) {
+ mdp4_overlay_update_lcd(mfd);
+
+ mdp4_mddi_overlay_kickoff(mfd, mddi_pipe);
+
+ /* signal if pan function is waiting for the update completion */
+ if (mfd->pan_waiting) {
+ mfd->pan_waiting = FALSE;
+ complete(&mfd->pan_comp);
+ }
+ }
+
+ mutex_unlock(&mfd->dma->ov_mutex);
+}
diff --git a/drivers/staging/msm/mdp4_util.c b/drivers/staging/msm/mdp4_util.c
new file mode 100644
index 0000000..fd97f52
--- /dev/null
+++ b/drivers/staging/msm/mdp4_util.c
@@ -0,0 +1,1686 @@
+
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/hrtimer.h>
+#include <linux/clk.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mdp4.h"
+
+void mdp4_sw_reset(ulong bits)
+{
+ bits &= 0x1f; /* 5 bits */
+ outpdw(MDP_BASE + 0x001c, bits); /* MDP_SW_RESET */
+
+ while (inpdw(MDP_BASE + 0x001c) & bits) /* self clear when complete */
+ ;
+ MSM_FB_INFO("mdp4_sw_reset: 0x%x\n", (int)bits);
+}
+
+void mdp4_overlay_cfg(int overlayer, int blt_mode, int refresh, int direct_out)
+{
+ ulong bits = 0;
+
+ if (blt_mode)
+ bits |= (1 << 3);
+ refresh &= 0x03; /* 2 bites */
+ bits |= (refresh << 1);
+ direct_out &= 0x01;
+ bits |= direct_out;
+
+ if (overlayer == MDP4_MIXER0)
+ outpdw(MDP_BASE + 0x10004, bits); /* MDP_OVERLAY0_CFG */
+ else
+ outpdw(MDP_BASE + 0x18004, bits); /* MDP_OVERLAY1_CFG */
+
+ MSM_FB_INFO("mdp4_overlay_cfg: 0x%x\n", (int)inpdw(MDP_BASE + 0x10004));
+}
+
+void mdp4_display_intf_sel(int output, ulong intf)
+{
+ ulong bits, mask;
+
+ bits = inpdw(MDP_BASE + 0x0038); /* MDP_DISP_INTF_SEL */
+
+ mask = 0x03; /* 2 bits */
+ intf &= 0x03; /* 2 bits */
+
+ switch (output) {
+ case EXTERNAL_INTF_SEL:
+ intf <<= 4;
+ mask <<= 4;
+ break;
+ case SECONDARY_INTF_SEL:
+ intf &= 0x02; /* only MDDI and EBI2 support */
+ intf <<= 2;
+ mask <<= 2;
+ break;
+ default:
+ break;
+ }
+
+
+ bits &= ~mask;
+ bits |= intf;
+
+ outpdw(MDP_BASE + 0x0038, bits); /* MDP_DISP_INTF_SEL */
+
+ MSM_FB_INFO("mdp4_display_intf_sel: 0x%x\n", (int)inpdw(MDP_BASE + 0x0038));
+}
+
+unsigned long mdp4_display_status(void)
+{
+ return inpdw(MDP_BASE + 0x0018) & 0x3ff; /* MDP_DISPLAY_STATUS */
+}
+
+void mdp4_ebi2_lcd_setup(int lcd, ulong base, int ystride)
+{
+ /* always use memory map */
+ ystride &= 0x01fff; /* 13 bits */
+ if (lcd == EBI2_LCD0) {
+ outpdw(MDP_BASE + 0x0060, base);/* MDP_EBI2_LCD0 */
+ outpdw(MDP_BASE + 0x0068, ystride);/* MDP_EBI2_LCD0_YSTRIDE */
+ } else {
+ outpdw(MDP_BASE + 0x0064, base);/* MDP_EBI2_LCD1 */
+ outpdw(MDP_BASE + 0x006c, ystride);/* MDP_EBI2_LCD1_YSTRIDE */
+ }
+}
+
+void mdp4_mddi_setup(int mddi, unsigned long id)
+{
+ ulong bits;
+
+ if (mddi == MDDI_EXTERNAL_SET)
+ bits = 0x02;
+ else if (mddi == MDDI_SECONDARY_SET)
+ bits = 0x01;
+ else
+ bits = 0; /* PRIMARY_SET */
+
+ id <<= 16;
+
+ bits |= id;
+
+ outpdw(MDP_BASE + 0x0090, bits); /* MDP_MDDI_PARAM_WR_SEL */
+}
+
+int mdp_ppp_blit(struct fb_info *info, struct mdp_blit_req *req,
+ struct file **pp_src_file, struct file **pp_dst_file)
+{
+
+ /* not implemented yet */
+ return -1;
+}
+
+void mdp4_hw_init(void)
+{
+ ulong bits;
+
+ /* MDP cmd block enable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+#ifdef MDP4_ERROR
+ /*
+ * Issue software reset on DMA_P will casue DMA_P dma engine stall
+ * on LCDC mode. However DMA_P does not stall at MDDI mode.
+ * This need further investigation.
+ */
+ mdp4_sw_reset(0x17);
+#endif
+
+ mdp4_clear_lcdc();
+
+ mdp4_mixer_blend_init(0);
+ mdp4_mixer_blend_init(1);
+ mdp4_vg_qseed_init(0);
+ mdp4_vg_qseed_init(1);
+ mdp4_vg_csc_mv_setup(0);
+ mdp4_vg_csc_mv_setup(1);
+ mdp4_vg_csc_pre_bv_setup(0);
+ mdp4_vg_csc_pre_bv_setup(1);
+ mdp4_vg_csc_post_bv_setup(0);
+ mdp4_vg_csc_post_bv_setup(1);
+ mdp4_vg_csc_pre_lv_setup(0);
+ mdp4_vg_csc_pre_lv_setup(1);
+ mdp4_vg_csc_post_lv_setup(0);
+ mdp4_vg_csc_post_lv_setup(1);
+
+ mdp4_mixer_gc_lut_setup(0);
+ mdp4_mixer_gc_lut_setup(1);
+
+ mdp4_vg_igc_lut_setup(0);
+ mdp4_vg_igc_lut_setup(1);
+
+ mdp4_rgb_igc_lut_setup(0);
+ mdp4_rgb_igc_lut_setup(1);
+
+ outp32(MDP_EBI2_PORTMAP_MODE, 0x3);
+
+ /* system interrupts */
+
+ bits = mdp_intr_mask;
+ outpdw(MDP_BASE + 0x0050, bits);/* enable specififed interrupts */
+
+ /* histogram */
+ MDP_OUTP(MDP_BASE + 0x95010, 1); /* auto clear HIST */
+
+ /* enable histogram interrupts */
+ outpdw(MDP_BASE + 0x9501c, INTR_HIST_DONE);
+
+ /* For the max read pending cmd config below, if the MDP clock */
+ /* is less than the AXI clock, then we must use 3 pending */
+ /* pending requests. Otherwise, we should use 8 pending requests. */
+ /* In the future we should do this detection automatically. */
+
+ /* max read pending cmd config */
+ outpdw(MDP_BASE + 0x004c, 0x02222); /* 3 pending requests */
+
+ /* dma_p fetch config */
+ outpdw(MDP_BASE + 0x91004, 0x27); /* burst size of 8 */
+
+#ifndef CONFIG_FB_MSM_OVERLAY
+ /* both REFRESH_MODE and DIRECT_OUT are ignored at BLT mode */
+ mdp4_overlay_cfg(MDP4_MIXER0, OVERLAY_MODE_BLT, 0, 0);
+ mdp4_overlay_cfg(MDP4_MIXER1, OVERLAY_MODE_BLT, 0, 0);
+#endif
+
+ /* MDP cmd block disable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+}
+
+
+void mdp4_clear_lcdc(void)
+{
+ uint32 bits;
+
+ bits = inpdw(MDP_BASE + 0xc0000);
+ if (bits & 0x01) /* enabled already */
+ return;
+
+ outpdw(MDP_BASE + 0xc0004, 0); /* vsync ctrl out */
+ outpdw(MDP_BASE + 0xc0008, 0); /* vsync period */
+ outpdw(MDP_BASE + 0xc000c, 0); /* vsync pusle width */
+ outpdw(MDP_BASE + 0xc0010, 0); /* lcdc display HCTL */
+ outpdw(MDP_BASE + 0xc0014, 0); /* lcdc display v start */
+ outpdw(MDP_BASE + 0xc0018, 0); /* lcdc display v end */
+ outpdw(MDP_BASE + 0xc001c, 0); /* lcdc active hctl */
+ outpdw(MDP_BASE + 0xc0020, 0); /* lcdc active v start */
+ outpdw(MDP_BASE + 0xc0024, 0); /* lcdc active v end */
+ outpdw(MDP_BASE + 0xc0028, 0); /* lcdc board color */
+ outpdw(MDP_BASE + 0xc002c, 0); /* lcdc underflow ctrl */
+ outpdw(MDP_BASE + 0xc0030, 0); /* lcdc hsync skew */
+ outpdw(MDP_BASE + 0xc0034, 0); /* lcdc test ctl */
+ outpdw(MDP_BASE + 0xc0038, 0); /* lcdc ctl polarity */
+}
+
+static struct mdp_dma_data overlay1_data;
+static int intr_dma_p;
+static int intr_dma_s;
+static int intr_dma_e;
+static int intr_overlay0;
+static int intr_overlay1;
+
+irqreturn_t mdp4_isr(int irq, void *ptr)
+{
+ uint32 isr, mask, lcdc;
+ struct mdp_dma_data *dma;
+
+ mdp_is_in_isr = TRUE;
+
+ while (1) {
+ isr = inpdw(MDP_INTR_STATUS);
+ if (isr == 0)
+ break;
+
+ mask = inpdw(MDP_INTR_ENABLE);
+ outpdw(MDP_INTR_CLEAR, isr);
+
+ isr &= mask;
+
+ if (unlikely(isr == 0))
+ break;
+
+ if (isr & INTR_DMA_P_DONE) {
+ intr_dma_p++;
+ lcdc = inpdw(MDP_BASE + 0xc0000);
+ dma = &dma2_data;
+ if (lcdc & 0x01) { /* LCDC enable */
+ /* disable LCDC interrupt */
+ mdp_intr_mask &= ~INTR_DMA_P_DONE;
+ outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+ dma->waiting = FALSE;
+ } else {
+ dma->busy = FALSE;
+ mdp_pipe_ctrl(MDP_DMA2_BLOCK,
+ MDP_BLOCK_POWER_OFF, TRUE);
+ }
+ complete(&dma->comp);
+ }
+ if (isr & INTR_DMA_S_DONE) {
+ intr_dma_s++;
+ dma = &dma_s_data;
+ dma->busy = FALSE;
+ mdp_pipe_ctrl(MDP_DMA_S_BLOCK,
+ MDP_BLOCK_POWER_OFF, TRUE);
+ complete(&dma->comp);
+ }
+ if (isr & INTR_DMA_E_DONE) {
+ intr_dma_e++;
+ dma = &dma_e_data;
+ mdp_intr_mask &= ~INTR_DMA_E_DONE;
+ outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+ dma->busy = FALSE;
+
+ if (dma->waiting) {
+ dma->waiting = FALSE;
+ complete(&dma->comp);
+ }
+ }
+ if (isr & INTR_OVERLAY0_DONE) {
+ intr_overlay0++;
+ lcdc = inpdw(MDP_BASE + 0xc0000);
+ dma = &dma2_data;
+ if (lcdc & 0x01) { /* LCDC enable */
+ /* disable LCDC interrupt */
+ mdp_intr_mask &= ~INTR_OVERLAY0_DONE;
+ outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+ dma->waiting = FALSE;
+ mdp4_overlay0_done_lcdc();
+ } else { /* MDDI */
+ dma->busy = FALSE;
+#ifdef MDP4_NONBLOCKING
+ mdp_disable_irq_nolock(MDP_OVERLAY0_TERM);
+#endif
+ mdp_pipe_ctrl(MDP_OVERLAY0_BLOCK,
+ MDP_BLOCK_POWER_OFF, TRUE);
+ mdp4_overlay0_done_mddi();
+ }
+ }
+ if (isr & INTR_OVERLAY1_DONE) {
+ intr_overlay1++;
+ dma = &overlay1_data;
+ dma->busy = FALSE;
+ mdp_pipe_ctrl(MDP_OVERLAY1_BLOCK,
+ MDP_BLOCK_POWER_OFF, TRUE);
+ complete(&dma->comp);
+ }
+ if (isr & INTR_DMA_P_HISTOGRAM) {
+ isr = inpdw(MDP_DMA_P_HIST_INTR_STATUS);
+ mask = inpdw(MDP_DMA_P_HIST_INTR_ENABLE);
+ outpdw(MDP_DMA_P_HIST_INTR_CLEAR, isr);
+ isr &= mask;
+ if (isr & INTR_HIST_DONE) {
+ if (mdp_hist.r)
+ memcpy(mdp_hist.r, MDP_BASE + 0x95100,
+ mdp_hist.bin_cnt*4);
+ if (mdp_hist.g)
+ memcpy(mdp_hist.g, MDP_BASE + 0x95200,
+ mdp_hist.bin_cnt*4);
+ if (mdp_hist.b)
+ memcpy(mdp_hist.b, MDP_BASE + 0x95300,
+ mdp_hist.bin_cnt*4);
+ complete(&mdp_hist_comp);
+ }
+ }
+ }
+
+ mdp_is_in_isr = FALSE;
+
+ return IRQ_HANDLED;
+}
+
+
+/*
+ * QSEED tables
+ */
+
+static uint32 vg_qseed_table0[] = {
+ 0x5556aaff, 0x00000000, 0x00000000, 0x00000000
+};
+
+static uint32 vg_qseed_table1[] = {
+ 0x76543210, 0xfedcba98
+};
+
+static uint32 vg_qseed_table2[] = {
+ 0x02000000, 0x00000000, 0x02060ff2, 0x00000008,
+ 0x02090fe4, 0x00000013, 0x020a0fd9, 0x0ffc0021,
+ 0x02080fce, 0x0ffa0030, 0x02030fc5, 0x0ff60042,
+ 0x01fd0fbe, 0x0ff10054, 0x01f50fb6, 0x0fed0068,
+ 0x01e90fb1, 0x0fe60080, 0x01dc0fae, 0x0fe10095,
+ 0x01ca0fae, 0x0fda00ae, 0x01b70fad, 0x0fd600c6,
+ 0x01a40fad, 0x0fcf00e0, 0x018f0faf, 0x0fc800fa,
+ 0x01780fb1, 0x0fc30114, 0x015f0fb5, 0x0fbf012d,
+ 0x01490fb7, 0x0fb70149, 0x012d0fbf, 0x0fb5015f,
+ 0x01140fc3, 0x0fb10178, 0x00fa0fc8, 0x0faf018f,
+ 0x00e00fcf, 0x0fad01a4, 0x00c60fd6, 0x0fad01b7,
+ 0x00ae0fda, 0x0fae01ca, 0x00950fe1, 0x0fae01dc,
+ 0x00800fe6, 0x0fb101e9, 0x00680fed, 0x0fb601f5,
+ 0x00540ff1, 0x0fbe01fd, 0x00420ff6, 0x0fc50203,
+ 0x00300ffa, 0x0fce0208, 0x00210ffc, 0x0fd9020a,
+ 0x00130000, 0x0fe40209, 0x00080000, 0x0ff20206,
+ 0x02000000, 0x00000000, 0x02040ff2, 0x0000000a,
+ 0x02040fe4, 0x00000018, 0x02010fda, 0x0ffc0029,
+ 0x01fc0fcf, 0x0ffa003b, 0x01f30fc7, 0x0ff60050,
+ 0x01e90fc0, 0x0ff20065, 0x01dc0fba, 0x0fee007c,
+ 0x01cc0fb6, 0x0fe80096, 0x01ba0fb4, 0x0fe400ae,
+ 0x01a70fb4, 0x0fdd00c8, 0x018f0fb5, 0x0fda00e2,
+ 0x017a0fb5, 0x0fd400fd, 0x01630fb8, 0x0fce0117,
+ 0x014c0fba, 0x0fca0130, 0x01320fbf, 0x0fc70148,
+ 0x011b0fc1, 0x0fc10163, 0x01010fc8, 0x0fc00177,
+ 0x00e90fcd, 0x0fbd018d, 0x00d10fd1, 0x0fbc01a2,
+ 0x00ba0fd7, 0x0fbb01b4, 0x00a30fdd, 0x0fbc01c4,
+ 0x008e0fe1, 0x0fbd01d4, 0x00790fe7, 0x0fbe01e2,
+ 0x00670feb, 0x0fc001ee, 0x00540ff1, 0x0fc501f6,
+ 0x00430ff4, 0x0fcb01fe, 0x00340ff8, 0x0fd10203,
+ 0x00260ffb, 0x0fd80207, 0x001a0ffd, 0x0fe10208,
+ 0x000f0000, 0x0fea0207, 0x00060000, 0x0ff50205,
+ 0x02000000, 0x00000000, 0x02020ff2, 0x0000000c,
+ 0x02000fe4, 0x0000001c, 0x01fa0fda, 0x0ffc0030,
+ 0x01f10fd0, 0x0ffa0045, 0x01e50fc8, 0x0ff6005d,
+ 0x01d60fc3, 0x0ff30074, 0x01c60fbd, 0x0fef008e,
+ 0x01b30fba, 0x0fe900aa, 0x019e0fb9, 0x0fe500c4,
+ 0x01870fba, 0x0fe000df, 0x016f0fbb, 0x0fdd00f9,
+ 0x01580fbc, 0x0fd80114, 0x01400fbf, 0x0fd3012e,
+ 0x01280fc2, 0x0fd00146, 0x010f0fc6, 0x0fce015d,
+ 0x00f90fc9, 0x0fc90175, 0x00e00fcf, 0x0fc90188,
+ 0x00ca0fd4, 0x0fc6019c, 0x00b40fd8, 0x0fc601ae,
+ 0x009f0fdd, 0x0fc501bf, 0x008b0fe3, 0x0fc601cc,
+ 0x00780fe6, 0x0fc701db, 0x00660feb, 0x0fc801e7,
+ 0x00560fef, 0x0fcb01f0, 0x00460ff3, 0x0fcf01f8,
+ 0x00380ff6, 0x0fd401fe, 0x002c0ff9, 0x0fd90202,
+ 0x00200ffc, 0x0fdf0205, 0x00160ffe, 0x0fe60206,
+ 0x000c0000, 0x0fed0207, 0x00050000, 0x0ff70204,
+ 0x02000000, 0x00000000, 0x01fe0ff3, 0x0000000f,
+ 0x01f60fe5, 0x00000025, 0x01ea0fdb, 0x0ffd003e,
+ 0x01db0fd2, 0x0ffb0058, 0x01c80fcc, 0x0ff70075,
+ 0x01b50fc7, 0x0ff40090, 0x01a00fc3, 0x0ff000ad,
+ 0x01880fc1, 0x0feb00cc, 0x01700fc1, 0x0fe800e7,
+ 0x01550fc3, 0x0fe40104, 0x013b0fc5, 0x0fe2011e,
+ 0x01240fc6, 0x0fde0138, 0x010c0fca, 0x0fda0150,
+ 0x00f40fcd, 0x0fd90166, 0x00dd0fd1, 0x0fd7017b,
+ 0x00c80fd4, 0x0fd40190, 0x00b20fd9, 0x0fd401a1,
+ 0x009f0fdd, 0x0fd301b1, 0x008c0fe1, 0x0fd301c0,
+ 0x007b0fe5, 0x0fd301cd, 0x006a0fea, 0x0fd401d8,
+ 0x005c0fec, 0x0fd501e3, 0x004d0ff0, 0x0fd601ed,
+ 0x00410ff3, 0x0fd801f4, 0x00340ff7, 0x0fdb01fa,
+ 0x002a0ff9, 0x0fdf01fe, 0x00200ffb, 0x0fe30202,
+ 0x00180ffd, 0x0fe70204, 0x00100ffe, 0x0fed0205,
+ 0x00090000, 0x0ff20205, 0x00040000, 0x0ff90203,
+ 0x02000000, 0x00000000, 0x02050ff5, 0x00000006,
+ 0x02070fea, 0x0000000f, 0x02080fe1, 0x0ffd001a,
+ 0x02070fd8, 0x0ffb0026, 0x02030fd1, 0x0ff80034,
+ 0x01fe0fcb, 0x0ff40043, 0x01f60fc5, 0x0ff10054,
+ 0x01ee0fc0, 0x0feb0067, 0x01e20fbe, 0x0fe70079,
+ 0x01d40fbd, 0x0fe1008e, 0x01c40fbc, 0x0fdd00a3,
+ 0x01b40fbb, 0x0fd700ba, 0x01a20fbc, 0x0fd100d1,
+ 0x018d0fbd, 0x0fcd00e9, 0x01770fc0, 0x0fc80101,
+ 0x01630fc1, 0x0fc1011b, 0x01480fc7, 0x0fbf0132,
+ 0x01300fca, 0x0fba014c, 0x01170fce, 0x0fb80163,
+ 0x00fd0fd4, 0x0fb5017a, 0x00e20fda, 0x0fb5018f,
+ 0x00c80fdd, 0x0fb401a7, 0x00ae0fe4, 0x0fb401ba,
+ 0x00960fe8, 0x0fb601cc, 0x007c0fee, 0x0fba01dc,
+ 0x00650ff2, 0x0fc001e9, 0x00500ff6, 0x0fc701f3,
+ 0x003b0ffa, 0x0fcf01fc, 0x00290ffc, 0x0fda0201,
+ 0x00180000, 0x0fe40204, 0x000a0000, 0x0ff20204,
+ 0x02000000, 0x00000000, 0x02030ff5, 0x00000008,
+ 0x02030fea, 0x00000013, 0x02020fe1, 0x0ffd0020,
+ 0x01fc0fd9, 0x0ffc002f, 0x01f60fd2, 0x0ff80040,
+ 0x01ed0fcd, 0x0ff50051, 0x01e30fc7, 0x0ff10065,
+ 0x01d70fc3, 0x0fec007a, 0x01c60fc2, 0x0fe9008f,
+ 0x01b60fc1, 0x0fe300a6, 0x01a20fc1, 0x0fe000bd,
+ 0x018f0fc1, 0x0fdb00d5, 0x017b0fc2, 0x0fd500ee,
+ 0x01640fc4, 0x0fd20106, 0x014d0fc8, 0x0fce011d,
+ 0x01370fc9, 0x0fc90137, 0x011d0fce, 0x0fc8014d,
+ 0x01060fd2, 0x0fc40164, 0x00ee0fd5, 0x0fc2017b,
+ 0x00d50fdb, 0x0fc1018f, 0x00bd0fe0, 0x0fc101a2,
+ 0x00a60fe3, 0x0fc101b6, 0x008f0fe9, 0x0fc201c6,
+ 0x007a0fec, 0x0fc301d7, 0x00650ff1, 0x0fc701e3,
+ 0x00510ff5, 0x0fcd01ed, 0x00400ff8, 0x0fd201f6,
+ 0x002f0ffc, 0x0fd901fc, 0x00200ffd, 0x0fe10202,
+ 0x00130000, 0x0fea0203, 0x00080000, 0x0ff50203,
+ 0x02000000, 0x00000000, 0x02020ff5, 0x00000009,
+ 0x01ff0fea, 0x00000017, 0x01fb0fe2, 0x0ffd0026,
+ 0x01f30fda, 0x0ffc0037, 0x01ea0fd3, 0x0ff8004b,
+ 0x01df0fce, 0x0ff5005e, 0x01d10fc9, 0x0ff20074,
+ 0x01c10fc6, 0x0fed008c, 0x01ae0fc5, 0x0fea00a3,
+ 0x019b0fc5, 0x0fe500bb, 0x01850fc6, 0x0fe200d3,
+ 0x01700fc6, 0x0fde00ec, 0x015a0fc8, 0x0fd90105,
+ 0x01430fca, 0x0fd6011d, 0x012b0fcd, 0x0fd30135,
+ 0x01150fcf, 0x0fcf014d, 0x00fc0fd4, 0x0fce0162,
+ 0x00e50fd8, 0x0fcc0177, 0x00cf0fdb, 0x0fca018c,
+ 0x00b80fe0, 0x0fc9019f, 0x00a20fe5, 0x0fca01af,
+ 0x008e0fe8, 0x0fcb01bf, 0x00790fec, 0x0fcb01d0,
+ 0x00670fef, 0x0fcd01dd, 0x00550ff4, 0x0fd001e7,
+ 0x00440ff7, 0x0fd501f0, 0x00350ffa, 0x0fda01f7,
+ 0x00270ffc, 0x0fdf01fe, 0x001b0ffe, 0x0fe70200,
+ 0x00100000, 0x0fee0202, 0x00060000, 0x0ff70203,
+ 0x02000000, 0x00000000, 0x01ff0ff5, 0x0000000c,
+ 0x01f80fea, 0x0000001e, 0x01ef0fe2, 0x0ffd0032,
+ 0x01e20fdb, 0x0ffc0047, 0x01d30fd5, 0x0ff9005f,
+ 0x01c20fd1, 0x0ff60077, 0x01b00fcd, 0x0ff30090,
+ 0x019b0fcb, 0x0fef00ab, 0x01850fcb, 0x0fec00c4,
+ 0x016e0fcc, 0x0fe800de, 0x01550fcd, 0x0fe600f8,
+ 0x013f0fce, 0x0fe20111, 0x01280fd0, 0x0fdf0129,
+ 0x01110fd2, 0x0fdd0140, 0x00f90fd6, 0x0fdb0156,
+ 0x00e40fd8, 0x0fd8016c, 0x00cd0fdd, 0x0fd8017e,
+ 0x00b80fe0, 0x0fd60192, 0x00a40fe3, 0x0fd601a3,
+ 0x00910fe7, 0x0fd501b3, 0x007f0feb, 0x0fd601c0,
+ 0x006e0fed, 0x0fd701ce, 0x005d0ff1, 0x0fd701db,
+ 0x004f0ff3, 0x0fd901e5, 0x00400ff7, 0x0fdc01ed,
+ 0x00330ff9, 0x0fe001f4, 0x00280ffb, 0x0fe301fa,
+ 0x001d0ffd, 0x0fe801fe, 0x00140ffe, 0x0fed0201,
+ 0x000c0000, 0x0ff20202, 0x00050000, 0x0ff90202,
+ 0x02000000, 0x00000000, 0x02040ff7, 0x00000005,
+ 0x02070fed, 0x0000000c, 0x02060fe6, 0x0ffe0016,
+ 0x02050fdf, 0x0ffc0020, 0x02020fd9, 0x0ff9002c,
+ 0x01fe0fd4, 0x0ff60038, 0x01f80fcf, 0x0ff30046,
+ 0x01f00fcb, 0x0fef0056, 0x01e70fc8, 0x0feb0066,
+ 0x01db0fc7, 0x0fe60078, 0x01cc0fc6, 0x0fe3008b,
+ 0x01bf0fc5, 0x0fdd009f, 0x01ae0fc6, 0x0fd800b4,
+ 0x019c0fc6, 0x0fd400ca, 0x01880fc9, 0x0fcf00e0,
+ 0x01750fc9, 0x0fc900f9, 0x015d0fce, 0x0fc6010f,
+ 0x01460fd0, 0x0fc20128, 0x012e0fd3, 0x0fbf0140,
+ 0x01140fd8, 0x0fbc0158, 0x00f90fdd, 0x0fbb016f,
+ 0x00df0fe0, 0x0fba0187, 0x00c40fe5, 0x0fb9019e,
+ 0x00aa0fe9, 0x0fba01b3, 0x008e0fef, 0x0fbd01c6,
+ 0x00740ff3, 0x0fc301d6, 0x005d0ff6, 0x0fc801e5,
+ 0x00450ffa, 0x0fd001f1, 0x00300ffc, 0x0fda01fa,
+ 0x001c0000, 0x0fe40200, 0x000c0000, 0x0ff20202,
+ 0x02000000, 0x00000000, 0x02030ff7, 0x00000006,
+ 0x02020fee, 0x00000010, 0x02000fe7, 0x0ffe001b,
+ 0x01fe0fdf, 0x0ffc0027, 0x01f70fda, 0x0ffa0035,
+ 0x01f00fd5, 0x0ff70044, 0x01e70fd0, 0x0ff40055,
+ 0x01dd0fcd, 0x0fef0067, 0x01d00fcb, 0x0fec0079,
+ 0x01bf0fcb, 0x0fe8008e, 0x01af0fca, 0x0fe500a2,
+ 0x019f0fc9, 0x0fe000b8, 0x018c0fca, 0x0fdb00cf,
+ 0x01770fcc, 0x0fd800e5, 0x01620fce, 0x0fd400fc,
+ 0x014d0fcf, 0x0fcf0115, 0x01350fd3, 0x0fcd012b,
+ 0x011d0fd6, 0x0fca0143, 0x01050fd9, 0x0fc8015a,
+ 0x00ec0fde, 0x0fc60170, 0x00d30fe2, 0x0fc60185,
+ 0x00bb0fe5, 0x0fc5019b, 0x00a30fea, 0x0fc501ae,
+ 0x008c0fed, 0x0fc601c1, 0x00740ff2, 0x0fc901d1,
+ 0x005e0ff5, 0x0fce01df, 0x004b0ff8, 0x0fd301ea,
+ 0x00370ffc, 0x0fda01f3, 0x00260ffd, 0x0fe201fb,
+ 0x00170000, 0x0fea01ff, 0x00090000, 0x0ff50202,
+ 0x02000000, 0x00000000, 0x02010ff7, 0x00000008,
+ 0x01ff0fee, 0x00000013, 0x01fb0fe7, 0x0ffe0020,
+ 0x01f60fe0, 0x0ffc002e, 0x01ed0fda, 0x0ffa003f,
+ 0x01e40fd6, 0x0ff7004f, 0x01d80fd2, 0x0ff40062,
+ 0x01ca0fcf, 0x0ff00077, 0x01bb0fcd, 0x0fed008b,
+ 0x01a90fcd, 0x0fe900a1, 0x01960fcd, 0x0fe600b7,
+ 0x01830fcd, 0x0fe200ce, 0x016d0fcf, 0x0fde00e6,
+ 0x01580fd0, 0x0fdb00fd, 0x01410fd3, 0x0fd80114,
+ 0x012c0fd4, 0x0fd4012c, 0x01140fd8, 0x0fd30141,
+ 0x00fd0fdb, 0x0fd00158, 0x00e60fde, 0x0fcf016d,
+ 0x00ce0fe2, 0x0fcd0183, 0x00b70fe6, 0x0fcd0196,
+ 0x00a10fe9, 0x0fcd01a9, 0x008b0fed, 0x0fcd01bb,
+ 0x00770ff0, 0x0fcf01ca, 0x00620ff4, 0x0fd201d8,
+ 0x004f0ff7, 0x0fd601e4, 0x003f0ffa, 0x0fda01ed,
+ 0x002e0ffc, 0x0fe001f6, 0x00200ffe, 0x0fe701fb,
+ 0x00130000, 0x0fee01ff, 0x00080000, 0x0ff70201,
+ 0x02000000, 0x00000000, 0x01ff0ff7, 0x0000000a,
+ 0x01f90fee, 0x00000019, 0x01f10fe7, 0x0ffe002a,
+ 0x01e60fe1, 0x0ffd003c, 0x01d90fdc, 0x0ffa0051,
+ 0x01cc0fd8, 0x0ff70065, 0x01bb0fd5, 0x0ff5007b,
+ 0x01a80fd3, 0x0ff10094, 0x01950fd2, 0x0fef00aa,
+ 0x01800fd2, 0x0feb00c3, 0x016a0fd3, 0x0fe900da,
+ 0x01540fd3, 0x0fe600f3, 0x013f0fd5, 0x0fe2010a,
+ 0x01280fd7, 0x0fe00121, 0x01100fda, 0x0fde0138,
+ 0x00fb0fdb, 0x0fdb014f, 0x00e40fdf, 0x0fdb0162,
+ 0x00ce0fe2, 0x0fd90177, 0x00b90fe4, 0x0fd8018b,
+ 0x00a50fe8, 0x0fd8019b, 0x00910fec, 0x0fd801ab,
+ 0x007e0fee, 0x0fd801bc, 0x006c0ff2, 0x0fd901c9,
+ 0x005c0ff4, 0x0fda01d6, 0x004b0ff7, 0x0fdd01e1,
+ 0x003c0ff9, 0x0fe001eb, 0x002f0ffb, 0x0fe401f2,
+ 0x00230ffd, 0x0fe801f8, 0x00180ffe, 0x0fed01fd,
+ 0x000e0000, 0x0ff20200, 0x00060000, 0x0ff90201,
+ 0x02000000, 0x00000000, 0x02030ff9, 0x00000004,
+ 0x02050ff2, 0x00000009, 0x02050fed, 0x0ffe0010,
+ 0x02040fe7, 0x0ffd0018, 0x02020fe3, 0x0ffb0020,
+ 0x01fe0fdf, 0x0ff9002a, 0x01fa0fdb, 0x0ff70034,
+ 0x01f40fd8, 0x0ff30041, 0x01ed0fd6, 0x0ff0004d,
+ 0x01e30fd5, 0x0fec005c, 0x01d80fd4, 0x0fea006a,
+ 0x01cd0fd3, 0x0fe5007b, 0x01c00fd3, 0x0fe1008c,
+ 0x01b10fd3, 0x0fdd009f, 0x01a10fd4, 0x0fd900b2,
+ 0x01900fd4, 0x0fd400c8, 0x017b0fd7, 0x0fd100dd,
+ 0x01660fd9, 0x0fcd00f4, 0x01500fda, 0x0fca010c,
+ 0x01380fde, 0x0fc60124, 0x011e0fe2, 0x0fc5013b,
+ 0x01040fe4, 0x0fc30155, 0x00e70fe8, 0x0fc10170,
+ 0x00cc0feb, 0x0fc10188, 0x00ad0ff0, 0x0fc301a0,
+ 0x00900ff4, 0x0fc701b5, 0x00750ff7, 0x0fcc01c8,
+ 0x00580ffb, 0x0fd201db, 0x003e0ffd, 0x0fdb01ea,
+ 0x00250000, 0x0fe501f6, 0x000f0000, 0x0ff301fe,
+ 0x02000000, 0x00000000, 0x02020ff9, 0x00000005,
+ 0x02020ff2, 0x0000000c, 0x02010fed, 0x0ffe0014,
+ 0x01fe0fe8, 0x0ffd001d, 0x01fa0fe3, 0x0ffb0028,
+ 0x01f40fe0, 0x0ff90033, 0x01ed0fdc, 0x0ff70040,
+ 0x01e50fd9, 0x0ff3004f, 0x01db0fd7, 0x0ff1005d,
+ 0x01ce0fd7, 0x0fed006e, 0x01c00fd6, 0x0feb007f,
+ 0x01b30fd5, 0x0fe70091, 0x01a30fd6, 0x0fe300a4,
+ 0x01920fd6, 0x0fe000b8, 0x017e0fd8, 0x0fdd00cd,
+ 0x016c0fd8, 0x0fd800e4, 0x01560fdb, 0x0fd600f9,
+ 0x01400fdd, 0x0fd20111, 0x01290fdf, 0x0fd00128,
+ 0x01110fe2, 0x0fce013f, 0x00f80fe6, 0x0fcd0155,
+ 0x00de0fe8, 0x0fcc016e, 0x00c40fec, 0x0fcb0185,
+ 0x00ab0fef, 0x0fcb019b, 0x00900ff3, 0x0fcd01b0,
+ 0x00770ff6, 0x0fd101c2, 0x005f0ff9, 0x0fd501d3,
+ 0x00470ffc, 0x0fdb01e2, 0x00320ffd, 0x0fe201ef,
+ 0x001e0000, 0x0fea01f8, 0x000c0000, 0x0ff501ff,
+ 0x02000000, 0x00000000, 0x02010ff9, 0x00000006,
+ 0x02000ff2, 0x0000000e, 0x01fd0fed, 0x0ffe0018,
+ 0x01f80fe8, 0x0ffd0023, 0x01f20fe4, 0x0ffb002f,
+ 0x01eb0fe0, 0x0ff9003c, 0x01e10fdd, 0x0ff7004b,
+ 0x01d60fda, 0x0ff4005c, 0x01c90fd9, 0x0ff2006c,
+ 0x01bc0fd8, 0x0fee007e, 0x01ab0fd8, 0x0fec0091,
+ 0x019b0fd8, 0x0fe800a5, 0x018b0fd8, 0x0fe400b9,
+ 0x01770fd9, 0x0fe200ce, 0x01620fdb, 0x0fdf00e4,
+ 0x014f0fdb, 0x0fdb00fb, 0x01380fde, 0x0fda0110,
+ 0x01210fe0, 0x0fd70128, 0x010a0fe2, 0x0fd5013f,
+ 0x00f30fe6, 0x0fd30154, 0x00da0fe9, 0x0fd3016a,
+ 0x00c30feb, 0x0fd20180, 0x00aa0fef, 0x0fd20195,
+ 0x00940ff1, 0x0fd301a8, 0x007b0ff5, 0x0fd501bb,
+ 0x00650ff7, 0x0fd801cc, 0x00510ffa, 0x0fdc01d9,
+ 0x003c0ffd, 0x0fe101e6, 0x002a0ffe, 0x0fe701f1,
+ 0x00190000, 0x0fee01f9, 0x000a0000, 0x0ff701ff,
+ 0x02000000, 0x00000000, 0x01ff0ff9, 0x00000008,
+ 0x01fb0ff2, 0x00000013, 0x01f50fed, 0x0ffe0020,
+ 0x01ed0fe8, 0x0ffd002e, 0x01e30fe4, 0x0ffb003e,
+ 0x01d80fe1, 0x0ff9004e, 0x01cb0fde, 0x0ff70060,
+ 0x01bc0fdc, 0x0ff40074, 0x01ac0fdb, 0x0ff20087,
+ 0x019a0fdb, 0x0fef009c, 0x01870fdb, 0x0fed00b1,
+ 0x01740fdb, 0x0fea00c7, 0x01600fdc, 0x0fe700dd,
+ 0x014b0fdd, 0x0fe500f3, 0x01350fdf, 0x0fe30109,
+ 0x01200fe0, 0x0fe00120, 0x01090fe3, 0x0fdf0135,
+ 0x00f30fe5, 0x0fdd014b, 0x00dd0fe7, 0x0fdc0160,
+ 0x00c70fea, 0x0fdb0174, 0x00b10fed, 0x0fdb0187,
+ 0x009c0fef, 0x0fdb019a, 0x00870ff2, 0x0fdb01ac,
+ 0x00740ff4, 0x0fdc01bc, 0x00600ff7, 0x0fde01cb,
+ 0x004e0ff9, 0x0fe101d8, 0x003e0ffb, 0x0fe401e3,
+ 0x002e0ffd, 0x0fe801ed, 0x00200ffe, 0x0fed01f5,
+ 0x00130000, 0x0ff201fb, 0x00080000, 0x0ff901ff,
+ 0x02000000, 0x00000000, 0x02060ff2, 0x00000008,
+ 0x02090fe4, 0x00000013, 0x020a0fd9, 0x0ffc0021,
+ 0x02080fce, 0x0ffa0030, 0x02030fc5, 0x0ff60042,
+ 0x01fd0fbe, 0x0ff10054, 0x01f50fb6, 0x0fed0068,
+ 0x01e90fb1, 0x0fe60080, 0x01dc0fae, 0x0fe10095,
+ 0x01ca0fae, 0x0fda00ae, 0x01b70fad, 0x0fd600c6,
+ 0x01a40fad, 0x0fcf00e0, 0x018f0faf, 0x0fc800fa,
+ 0x01780fb1, 0x0fc30114, 0x015f0fb5, 0x0fbf012d,
+ 0x01490fb7, 0x0fb70149, 0x012d0fbf, 0x0fb5015f,
+ 0x01140fc3, 0x0fb10178, 0x00fa0fc8, 0x0faf018f,
+ 0x00e00fcf, 0x0fad01a4, 0x00c60fd6, 0x0fad01b7,
+ 0x00ae0fda, 0x0fae01ca, 0x00950fe1, 0x0fae01dc,
+ 0x00800fe6, 0x0fb101e9, 0x00680fed, 0x0fb601f5,
+ 0x00540ff1, 0x0fbe01fd, 0x00420ff6, 0x0fc50203,
+ 0x00300ffa, 0x0fce0208, 0x00210ffc, 0x0fd9020a,
+ 0x00130000, 0x0fe40209, 0x00080000, 0x0ff20206,
+ 0x02000000, 0x00000000, 0x02040ff2, 0x0000000a,
+ 0x02040fe4, 0x00000018, 0x02010fda, 0x0ffc0029,
+ 0x01fc0fcf, 0x0ffa003b, 0x01f30fc7, 0x0ff60050,
+ 0x01e90fc0, 0x0ff20065, 0x01dc0fba, 0x0fee007c,
+ 0x01cc0fb6, 0x0fe80096, 0x01ba0fb4, 0x0fe400ae,
+ 0x01a70fb4, 0x0fdd00c8, 0x018f0fb5, 0x0fda00e2,
+ 0x017a0fb5, 0x0fd400fd, 0x01630fb8, 0x0fce0117,
+ 0x014c0fba, 0x0fca0130, 0x01320fbf, 0x0fc70148,
+ 0x011b0fc1, 0x0fc10163, 0x01010fc8, 0x0fc00177,
+ 0x00e90fcd, 0x0fbd018d, 0x00d10fd1, 0x0fbc01a2,
+ 0x00ba0fd7, 0x0fbb01b4, 0x00a30fdd, 0x0fbc01c4,
+ 0x008e0fe1, 0x0fbd01d4, 0x00790fe7, 0x0fbe01e2,
+ 0x00670feb, 0x0fc001ee, 0x00540ff1, 0x0fc501f6,
+ 0x00430ff4, 0x0fcb01fe, 0x00340ff8, 0x0fd10203,
+ 0x00260ffb, 0x0fd80207, 0x001a0ffd, 0x0fe10208,
+ 0x000f0000, 0x0fea0207, 0x00060000, 0x0ff50205,
+ 0x02000000, 0x00000000, 0x02020ff2, 0x0000000c,
+ 0x02000fe4, 0x0000001c, 0x01fa0fda, 0x0ffc0030,
+ 0x01f10fd0, 0x0ffa0045, 0x01e50fc8, 0x0ff6005d,
+ 0x01d60fc3, 0x0ff30074, 0x01c60fbd, 0x0fef008e,
+ 0x01b30fba, 0x0fe900aa, 0x019e0fb9, 0x0fe500c4,
+ 0x01870fba, 0x0fe000df, 0x016f0fbb, 0x0fdd00f9,
+ 0x01580fbc, 0x0fd80114, 0x01400fbf, 0x0fd3012e,
+ 0x01280fc2, 0x0fd00146, 0x010f0fc6, 0x0fce015d,
+ 0x00f90fc9, 0x0fc90175, 0x00e00fcf, 0x0fc90188,
+ 0x00ca0fd4, 0x0fc6019c, 0x00b40fd8, 0x0fc601ae,
+ 0x009f0fdd, 0x0fc501bf, 0x008b0fe3, 0x0fc601cc,
+ 0x00780fe6, 0x0fc701db, 0x00660feb, 0x0fc801e7,
+ 0x00560fef, 0x0fcb01f0, 0x00460ff3, 0x0fcf01f8,
+ 0x00380ff6, 0x0fd401fe, 0x002c0ff9, 0x0fd90202,
+ 0x00200ffc, 0x0fdf0205, 0x00160ffe, 0x0fe60206,
+ 0x000c0000, 0x0fed0207, 0x00050000, 0x0ff70204,
+ 0x02000000, 0x00000000, 0x01fe0ff3, 0x0000000f,
+ 0x01f60fe5, 0x00000025, 0x01ea0fdb, 0x0ffd003e,
+ 0x01db0fd2, 0x0ffb0058, 0x01c80fcc, 0x0ff70075,
+ 0x01b50fc7, 0x0ff40090, 0x01a00fc3, 0x0ff000ad,
+ 0x01880fc1, 0x0feb00cc, 0x01700fc1, 0x0fe800e7,
+ 0x01550fc3, 0x0fe40104, 0x013b0fc5, 0x0fe2011e,
+ 0x01240fc6, 0x0fde0138, 0x010c0fca, 0x0fda0150,
+ 0x00f40fcd, 0x0fd90166, 0x00dd0fd1, 0x0fd7017b,
+ 0x00c80fd4, 0x0fd40190, 0x00b20fd9, 0x0fd401a1,
+ 0x009f0fdd, 0x0fd301b1, 0x008c0fe1, 0x0fd301c0,
+ 0x007b0fe5, 0x0fd301cd, 0x006a0fea, 0x0fd401d8,
+ 0x005c0fec, 0x0fd501e3, 0x004d0ff0, 0x0fd601ed,
+ 0x00410ff3, 0x0fd801f4, 0x00340ff7, 0x0fdb01fa,
+ 0x002a0ff9, 0x0fdf01fe, 0x00200ffb, 0x0fe30202,
+ 0x00180ffd, 0x0fe70204, 0x00100ffe, 0x0fed0205,
+ 0x00090000, 0x0ff20205, 0x00040000, 0x0ff90203,
+ 0x02000000, 0x00000000, 0x02050ff5, 0x00000006,
+ 0x02070fea, 0x0000000f, 0x02080fe1, 0x0ffd001a,
+ 0x02070fd8, 0x0ffb0026, 0x02030fd1, 0x0ff80034,
+ 0x01fe0fcb, 0x0ff40043, 0x01f60fc5, 0x0ff10054,
+ 0x01ee0fc0, 0x0feb0067, 0x01e20fbe, 0x0fe70079,
+ 0x01d40fbd, 0x0fe1008e, 0x01c40fbc, 0x0fdd00a3,
+ 0x01b40fbb, 0x0fd700ba, 0x01a20fbc, 0x0fd100d1,
+ 0x018d0fbd, 0x0fcd00e9, 0x01770fc0, 0x0fc80101,
+ 0x01630fc1, 0x0fc1011b, 0x01480fc7, 0x0fbf0132,
+ 0x01300fca, 0x0fba014c, 0x01170fce, 0x0fb80163,
+ 0x00fd0fd4, 0x0fb5017a, 0x00e20fda, 0x0fb5018f,
+ 0x00c80fdd, 0x0fb401a7, 0x00ae0fe4, 0x0fb401ba,
+ 0x00960fe8, 0x0fb601cc, 0x007c0fee, 0x0fba01dc,
+ 0x00650ff2, 0x0fc001e9, 0x00500ff6, 0x0fc701f3,
+ 0x003b0ffa, 0x0fcf01fc, 0x00290ffc, 0x0fda0201,
+ 0x00180000, 0x0fe40204, 0x000a0000, 0x0ff20204,
+ 0x02000000, 0x00000000, 0x02030ff5, 0x00000008,
+ 0x02030fea, 0x00000013, 0x02020fe1, 0x0ffd0020,
+ 0x01fc0fd9, 0x0ffc002f, 0x01f60fd2, 0x0ff80040,
+ 0x01ed0fcd, 0x0ff50051, 0x01e30fc7, 0x0ff10065,
+ 0x01d70fc3, 0x0fec007a, 0x01c60fc2, 0x0fe9008f,
+ 0x01b60fc1, 0x0fe300a6, 0x01a20fc1, 0x0fe000bd,
+ 0x018f0fc1, 0x0fdb00d5, 0x017b0fc2, 0x0fd500ee,
+ 0x01640fc4, 0x0fd20106, 0x014d0fc8, 0x0fce011d,
+ 0x01370fc9, 0x0fc90137, 0x011d0fce, 0x0fc8014d,
+ 0x01060fd2, 0x0fc40164, 0x00ee0fd5, 0x0fc2017b,
+ 0x00d50fdb, 0x0fc1018f, 0x00bd0fe0, 0x0fc101a2,
+ 0x00a60fe3, 0x0fc101b6, 0x008f0fe9, 0x0fc201c6,
+ 0x007a0fec, 0x0fc301d7, 0x00650ff1, 0x0fc701e3,
+ 0x00510ff5, 0x0fcd01ed, 0x00400ff8, 0x0fd201f6,
+ 0x002f0ffc, 0x0fd901fc, 0x00200ffd, 0x0fe10202,
+ 0x00130000, 0x0fea0203, 0x00080000, 0x0ff50203,
+ 0x02000000, 0x00000000, 0x02020ff5, 0x00000009,
+ 0x01ff0fea, 0x00000017, 0x01fb0fe2, 0x0ffd0026,
+ 0x01f30fda, 0x0ffc0037, 0x01ea0fd3, 0x0ff8004b,
+ 0x01df0fce, 0x0ff5005e, 0x01d10fc9, 0x0ff20074,
+ 0x01c10fc6, 0x0fed008c, 0x01ae0fc5, 0x0fea00a3,
+ 0x019b0fc5, 0x0fe500bb, 0x01850fc6, 0x0fe200d3,
+ 0x01700fc6, 0x0fde00ec, 0x015a0fc8, 0x0fd90105,
+ 0x01430fca, 0x0fd6011d, 0x012b0fcd, 0x0fd30135,
+ 0x01150fcf, 0x0fcf014d, 0x00fc0fd4, 0x0fce0162,
+ 0x00e50fd8, 0x0fcc0177, 0x00cf0fdb, 0x0fca018c,
+ 0x00b80fe0, 0x0fc9019f, 0x00a20fe5, 0x0fca01af,
+ 0x008e0fe8, 0x0fcb01bf, 0x00790fec, 0x0fcb01d0,
+ 0x00670fef, 0x0fcd01dd, 0x00550ff4, 0x0fd001e7,
+ 0x00440ff7, 0x0fd501f0, 0x00350ffa, 0x0fda01f7,
+ 0x00270ffc, 0x0fdf01fe, 0x001b0ffe, 0x0fe70200,
+ 0x00100000, 0x0fee0202, 0x00060000, 0x0ff70203,
+ 0x02000000, 0x00000000, 0x01ff0ff5, 0x0000000c,
+ 0x01f80fea, 0x0000001e, 0x01ef0fe2, 0x0ffd0032,
+ 0x01e20fdb, 0x0ffc0047, 0x01d30fd5, 0x0ff9005f,
+ 0x01c20fd1, 0x0ff60077, 0x01b00fcd, 0x0ff30090,
+ 0x019b0fcb, 0x0fef00ab, 0x01850fcb, 0x0fec00c4,
+ 0x016e0fcc, 0x0fe800de, 0x01550fcd, 0x0fe600f8,
+ 0x013f0fce, 0x0fe20111, 0x01280fd0, 0x0fdf0129,
+ 0x01110fd2, 0x0fdd0140, 0x00f90fd6, 0x0fdb0156,
+ 0x00e40fd8, 0x0fd8016c, 0x00cd0fdd, 0x0fd8017e,
+ 0x00b80fe0, 0x0fd60192, 0x00a40fe3, 0x0fd601a3,
+ 0x00910fe7, 0x0fd501b3, 0x007f0feb, 0x0fd601c0,
+ 0x006e0fed, 0x0fd701ce, 0x005d0ff1, 0x0fd701db,
+ 0x004f0ff3, 0x0fd901e5, 0x00400ff7, 0x0fdc01ed,
+ 0x00330ff9, 0x0fe001f4, 0x00280ffb, 0x0fe301fa,
+ 0x001d0ffd, 0x0fe801fe, 0x00140ffe, 0x0fed0201,
+ 0x000c0000, 0x0ff20202, 0x00050000, 0x0ff90202,
+ 0x02000000, 0x00000000, 0x02040ff7, 0x00000005,
+ 0x02070fed, 0x0000000c, 0x02060fe6, 0x0ffe0016,
+ 0x02050fdf, 0x0ffc0020, 0x02020fd9, 0x0ff9002c,
+ 0x01fe0fd4, 0x0ff60038, 0x01f80fcf, 0x0ff30046,
+ 0x01f00fcb, 0x0fef0056, 0x01e70fc8, 0x0feb0066,
+ 0x01db0fc7, 0x0fe60078, 0x01cc0fc6, 0x0fe3008b,
+ 0x01bf0fc5, 0x0fdd009f, 0x01ae0fc6, 0x0fd800b4,
+ 0x019c0fc6, 0x0fd400ca, 0x01880fc9, 0x0fcf00e0,
+ 0x01750fc9, 0x0fc900f9, 0x015d0fce, 0x0fc6010f,
+ 0x01460fd0, 0x0fc20128, 0x012e0fd3, 0x0fbf0140,
+ 0x01140fd8, 0x0fbc0158, 0x00f90fdd, 0x0fbb016f,
+ 0x00df0fe0, 0x0fba0187, 0x00c40fe5, 0x0fb9019e,
+ 0x00aa0fe9, 0x0fba01b3, 0x008e0fef, 0x0fbd01c6,
+ 0x00740ff3, 0x0fc301d6, 0x005d0ff6, 0x0fc801e5,
+ 0x00450ffa, 0x0fd001f1, 0x00300ffc, 0x0fda01fa,
+ 0x001c0000, 0x0fe40200, 0x000c0000, 0x0ff20202,
+ 0x02000000, 0x00000000, 0x02030ff7, 0x00000006,
+ 0x02020fee, 0x00000010, 0x02000fe7, 0x0ffe001b,
+ 0x01fe0fdf, 0x0ffc0027, 0x01f70fda, 0x0ffa0035,
+ 0x01f00fd5, 0x0ff70044, 0x01e70fd0, 0x0ff40055,
+ 0x01dd0fcd, 0x0fef0067, 0x01d00fcb, 0x0fec0079,
+ 0x01bf0fcb, 0x0fe8008e, 0x01af0fca, 0x0fe500a2,
+ 0x019f0fc9, 0x0fe000b8, 0x018c0fca, 0x0fdb00cf,
+ 0x01770fcc, 0x0fd800e5, 0x01620fce, 0x0fd400fc,
+ 0x014d0fcf, 0x0fcf0115, 0x01350fd3, 0x0fcd012b,
+ 0x011d0fd6, 0x0fca0143, 0x01050fd9, 0x0fc8015a,
+ 0x00ec0fde, 0x0fc60170, 0x00d30fe2, 0x0fc60185,
+ 0x00bb0fe5, 0x0fc5019b, 0x00a30fea, 0x0fc501ae,
+ 0x008c0fed, 0x0fc601c1, 0x00740ff2, 0x0fc901d1,
+ 0x005e0ff5, 0x0fce01df, 0x004b0ff8, 0x0fd301ea,
+ 0x00370ffc, 0x0fda01f3, 0x00260ffd, 0x0fe201fb,
+ 0x00170000, 0x0fea01ff, 0x00090000, 0x0ff50202,
+ 0x02000000, 0x00000000, 0x02010ff7, 0x00000008,
+ 0x01ff0fee, 0x00000013, 0x01fb0fe7, 0x0ffe0020,
+ 0x01f60fe0, 0x0ffc002e, 0x01ed0fda, 0x0ffa003f,
+ 0x01e40fd6, 0x0ff7004f, 0x01d80fd2, 0x0ff40062,
+ 0x01ca0fcf, 0x0ff00077, 0x01bb0fcd, 0x0fed008b,
+ 0x01a90fcd, 0x0fe900a1, 0x01960fcd, 0x0fe600b7,
+ 0x01830fcd, 0x0fe200ce, 0x016d0fcf, 0x0fde00e6,
+ 0x01580fd0, 0x0fdb00fd, 0x01410fd3, 0x0fd80114,
+ 0x012c0fd4, 0x0fd4012c, 0x01140fd8, 0x0fd30141,
+ 0x00fd0fdb, 0x0fd00158, 0x00e60fde, 0x0fcf016d,
+ 0x00ce0fe2, 0x0fcd0183, 0x00b70fe6, 0x0fcd0196,
+ 0x00a10fe9, 0x0fcd01a9, 0x008b0fed, 0x0fcd01bb,
+ 0x00770ff0, 0x0fcf01ca, 0x00620ff4, 0x0fd201d8,
+ 0x004f0ff7, 0x0fd601e4, 0x003f0ffa, 0x0fda01ed,
+ 0x002e0ffc, 0x0fe001f6, 0x00200ffe, 0x0fe701fb,
+ 0x00130000, 0x0fee01ff, 0x00080000, 0x0ff70201,
+ 0x02000000, 0x00000000, 0x01ff0ff7, 0x0000000a,
+ 0x01f90fee, 0x00000019, 0x01f10fe7, 0x0ffe002a,
+ 0x01e60fe1, 0x0ffd003c, 0x01d90fdc, 0x0ffa0051,
+ 0x01cc0fd8, 0x0ff70065, 0x01bb0fd5, 0x0ff5007b,
+ 0x01a80fd3, 0x0ff10094, 0x01950fd2, 0x0fef00aa,
+ 0x01800fd2, 0x0feb00c3, 0x016a0fd3, 0x0fe900da,
+ 0x01540fd3, 0x0fe600f3, 0x013f0fd5, 0x0fe2010a,
+ 0x01280fd7, 0x0fe00121, 0x01100fda, 0x0fde0138,
+ 0x00fb0fdb, 0x0fdb014f, 0x00e40fdf, 0x0fdb0162,
+ 0x00ce0fe2, 0x0fd90177, 0x00b90fe4, 0x0fd8018b,
+ 0x00a50fe8, 0x0fd8019b, 0x00910fec, 0x0fd801ab,
+ 0x007e0fee, 0x0fd801bc, 0x006c0ff2, 0x0fd901c9,
+ 0x005c0ff4, 0x0fda01d6, 0x004b0ff7, 0x0fdd01e1,
+ 0x003c0ff9, 0x0fe001eb, 0x002f0ffb, 0x0fe401f2,
+ 0x00230ffd, 0x0fe801f8, 0x00180ffe, 0x0fed01fd,
+ 0x000e0000, 0x0ff20200, 0x00060000, 0x0ff90201,
+ 0x02000000, 0x00000000, 0x02030ff9, 0x00000004,
+ 0x02050ff2, 0x00000009, 0x02050fed, 0x0ffe0010,
+ 0x02040fe7, 0x0ffd0018, 0x02020fe3, 0x0ffb0020,
+ 0x01fe0fdf, 0x0ff9002a, 0x01fa0fdb, 0x0ff70034,
+ 0x01f40fd8, 0x0ff30041, 0x01ed0fd6, 0x0ff0004d,
+ 0x01e30fd5, 0x0fec005c, 0x01d80fd4, 0x0fea006a,
+ 0x01cd0fd3, 0x0fe5007b, 0x01c00fd3, 0x0fe1008c,
+ 0x01b10fd3, 0x0fdd009f, 0x01a10fd4, 0x0fd900b2,
+ 0x01900fd4, 0x0fd400c8, 0x017b0fd7, 0x0fd100dd,
+ 0x01660fd9, 0x0fcd00f4, 0x01500fda, 0x0fca010c,
+ 0x01380fde, 0x0fc60124, 0x011e0fe2, 0x0fc5013b,
+ 0x01040fe4, 0x0fc30155, 0x00e70fe8, 0x0fc10170,
+ 0x00cc0feb, 0x0fc10188, 0x00ad0ff0, 0x0fc301a0,
+ 0x00900ff4, 0x0fc701b5, 0x00750ff7, 0x0fcc01c8,
+ 0x00580ffb, 0x0fd201db, 0x003e0ffd, 0x0fdb01ea,
+ 0x00250000, 0x0fe501f6, 0x000f0000, 0x0ff301fe,
+ 0x02000000, 0x00000000, 0x02020ff9, 0x00000005,
+ 0x02020ff2, 0x0000000c, 0x02010fed, 0x0ffe0014,
+ 0x01fe0fe8, 0x0ffd001d, 0x01fa0fe3, 0x0ffb0028,
+ 0x01f40fe0, 0x0ff90033, 0x01ed0fdc, 0x0ff70040,
+ 0x01e50fd9, 0x0ff3004f, 0x01db0fd7, 0x0ff1005d,
+ 0x01ce0fd7, 0x0fed006e, 0x01c00fd6, 0x0feb007f,
+ 0x01b30fd5, 0x0fe70091, 0x01a30fd6, 0x0fe300a4,
+ 0x01920fd6, 0x0fe000b8, 0x017e0fd8, 0x0fdd00cd,
+ 0x016c0fd8, 0x0fd800e4, 0x01560fdb, 0x0fd600f9,
+ 0x01400fdd, 0x0fd20111, 0x01290fdf, 0x0fd00128,
+ 0x01110fe2, 0x0fce013f, 0x00f80fe6, 0x0fcd0155,
+ 0x00de0fe8, 0x0fcc016e, 0x00c40fec, 0x0fcb0185,
+ 0x00ab0fef, 0x0fcb019b, 0x00900ff3, 0x0fcd01b0,
+ 0x00770ff6, 0x0fd101c2, 0x005f0ff9, 0x0fd501d3,
+ 0x00470ffc, 0x0fdb01e2, 0x00320ffd, 0x0fe201ef,
+ 0x001e0000, 0x0fea01f8, 0x000c0000, 0x0ff501ff,
+ 0x02000000, 0x00000000, 0x02010ff9, 0x00000006,
+ 0x02000ff2, 0x0000000e, 0x01fd0fed, 0x0ffe0018,
+ 0x01f80fe8, 0x0ffd0023, 0x01f20fe4, 0x0ffb002f,
+ 0x01eb0fe0, 0x0ff9003c, 0x01e10fdd, 0x0ff7004b,
+ 0x01d60fda, 0x0ff4005c, 0x01c90fd9, 0x0ff2006c,
+ 0x01bc0fd8, 0x0fee007e, 0x01ab0fd8, 0x0fec0091,
+ 0x019b0fd8, 0x0fe800a5, 0x018b0fd8, 0x0fe400b9,
+ 0x01770fd9, 0x0fe200ce, 0x01620fdb, 0x0fdf00e4,
+ 0x014f0fdb, 0x0fdb00fb, 0x01380fde, 0x0fda0110,
+ 0x01210fe0, 0x0fd70128, 0x010a0fe2, 0x0fd5013f,
+ 0x00f30fe6, 0x0fd30154, 0x00da0fe9, 0x0fd3016a,
+ 0x00c30feb, 0x0fd20180, 0x00aa0fef, 0x0fd20195,
+ 0x00940ff1, 0x0fd301a8, 0x007b0ff5, 0x0fd501bb,
+ 0x00650ff7, 0x0fd801cc, 0x00510ffa, 0x0fdc01d9,
+ 0x003c0ffd, 0x0fe101e6, 0x002a0ffe, 0x0fe701f1,
+ 0x00190000, 0x0fee01f9, 0x000a0000, 0x0ff701ff,
+ 0x02000000, 0x00000000, 0x01ff0ff9, 0x00000008,
+ 0x01fb0ff2, 0x00000013, 0x01f50fed, 0x0ffe0020,
+ 0x01ed0fe8, 0x0ffd002e, 0x01e30fe4, 0x0ffb003e,
+ 0x01d80fe1, 0x0ff9004e, 0x01cb0fde, 0x0ff70060,
+ 0x01bc0fdc, 0x0ff40074, 0x01ac0fdb, 0x0ff20087,
+ 0x019a0fdb, 0x0fef009c, 0x01870fdb, 0x0fed00b1,
+ 0x01740fdb, 0x0fea00c7, 0x01600fdc, 0x0fe700dd,
+ 0x014b0fdd, 0x0fe500f3, 0x01350fdf, 0x0fe30109,
+ 0x01200fe0, 0x0fe00120, 0x01090fe3, 0x0fdf0135,
+ 0x00f30fe5, 0x0fdd014b, 0x00dd0fe7, 0x0fdc0160,
+ 0x00c70fea, 0x0fdb0174, 0x00b10fed, 0x0fdb0187,
+ 0x009c0fef, 0x0fdb019a, 0x00870ff2, 0x0fdb01ac,
+ 0x00740ff4, 0x0fdc01bc, 0x00600ff7, 0x0fde01cb,
+ 0x004e0ff9, 0x0fe101d8, 0x003e0ffb, 0x0fe401e3,
+ 0x002e0ffd, 0x0fe801ed, 0x00200ffe, 0x0fed01f5,
+ 0x00130000, 0x0ff201fb, 0x00080000, 0x0ff901ff
+};
+
+
+#define MDP4_QSEED_TABLE0_OFF 0x8100
+#define MDP4_QSEED_TABLE1_OFF 0x8200
+#define MDP4_QSEED_TABLE2_OFF 0x9000
+
+void mdp4_vg_qseed_init(int vp_num)
+{
+ uint32 *off;
+ int i, voff;
+
+ voff = MDP4_VIDEO_OFF * vp_num;
+ off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+ MDP4_QSEED_TABLE0_OFF);
+ for (i = 0; i < (sizeof(vg_qseed_table0) / sizeof(uint32)); i++) {
+ outpdw(off, vg_qseed_table0[i]);
+ off++;
+ }
+
+ off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+ MDP4_QSEED_TABLE1_OFF);
+ for (i = 0; i < (sizeof(vg_qseed_table1) / sizeof(uint32)); i++) {
+ outpdw(off, vg_qseed_table1[i]);
+ off++;
+ }
+
+ off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+ MDP4_QSEED_TABLE2_OFF);
+ for (i = 0; i < (sizeof(vg_qseed_table2) / sizeof(uint32)); i++) {
+ outpdw(off, vg_qseed_table2[i]);
+ off++;
+ }
+
+}
+
+void mdp4_mixer_blend_init(mixer_num)
+{
+ unsigned char *overlay_base;
+ int off;
+
+ if (mixer_num) /* mixer number, /dev/fb0, /dev/fb1 */
+ overlay_base = MDP_BASE + MDP4_OVERLAYPROC1_BASE;/* 0x18000 */
+ else
+ overlay_base = MDP_BASE + MDP4_OVERLAYPROC0_BASE;/* 0x10000 */
+
+ /* stage 0 to stage 2 */
+ off = 0;
+ outpdw(overlay_base + off + 0x104, 0x010);
+ outpdw(overlay_base + off + 0x108, 0xff);/* FG */
+ outpdw(overlay_base + off + 0x10c, 0x00);/* BG */
+
+ off += 0x20;
+ outpdw(overlay_base + off + 0x104, 0x010);
+ outpdw(overlay_base + off + 0x108, 0xff);/* FG */
+ outpdw(overlay_base + off + 0x10c, 0x00);/* BG */
+
+ off += 0x20;
+ outpdw(overlay_base + off + 0x104, 0x010);
+ outpdw(overlay_base + off + 0x108, 0xff);/* FG */
+ outpdw(overlay_base + off + 0x10c, 0x00);/* BG */
+}
+
+
+static uint32 csc_matrix_tab[9] = {
+ 0x0254, 0x0000, 0x0331,
+ 0x0254, 0xff37, 0xfe60,
+ 0x0254, 0x0409, 0x0000
+};
+
+static uint32 csc_pre_bv_tab[3] = {0xfff0, 0xff80, 0xff80 };
+static uint32 csc_post_bv_tab[3] = {0, 0, 0 };
+
+static uint32 csc_pre_lv_tab[6] = {0, 0xff, 0, 0xff, 0, 0xff };
+static uint32 csc_post_lv_tab[6] = {0, 0xff, 0, 0xff, 0, 0xff };
+
+#define MDP4_CSC_MV_OFF 0x4400
+#define MDP4_CSC_PRE_BV_OFF 0x4500
+#define MDP4_CSC_POST_BV_OFF 0x4580
+#define MDP4_CSC_PRE_LV_OFF 0x4600
+#define MDP4_CSC_POST_LV_OFF 0x4680
+
+void mdp4_vg_csc_mv_setup(int vp_num)
+{
+ uint32 *off;
+ int i, voff;
+
+ voff = MDP4_VIDEO_OFF * vp_num;
+ off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+ MDP4_CSC_MV_OFF);
+ for (i = 0; i < 9; i++) {
+ outpdw(off, csc_matrix_tab[i]);
+ off++;
+ }
+}
+
+void mdp4_vg_csc_pre_bv_setup(int vp_num)
+{
+ uint32 *off;
+ int i, voff;
+
+ voff = MDP4_VIDEO_OFF * vp_num;
+ off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+ MDP4_CSC_PRE_BV_OFF);
+ for (i = 0; i < 3; i++) {
+ outpdw(off, csc_pre_bv_tab[i]);
+ off++;
+ }
+}
+
+void mdp4_vg_csc_post_bv_setup(int vp_num)
+{
+ uint32 *off;
+ int i, voff;
+
+ voff = MDP4_VIDEO_OFF * vp_num;
+ off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+ MDP4_CSC_POST_BV_OFF);
+ for (i = 0; i < 3; i++) {
+ outpdw(off, csc_post_bv_tab[i]);
+ off++;
+ }
+}
+
+void mdp4_vg_csc_pre_lv_setup(int vp_num)
+{
+ uint32 *off;
+ int i, voff;
+
+ voff = MDP4_VIDEO_OFF * vp_num;
+ off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+ MDP4_CSC_PRE_LV_OFF);
+
+ for (i = 0; i < 6; i++) {
+ outpdw(off, csc_pre_lv_tab[i]);
+ off++;
+ }
+}
+
+void mdp4_vg_csc_post_lv_setup(int vp_num)
+{
+ uint32 *off;
+ int i, voff;
+
+ voff = MDP4_VIDEO_OFF * vp_num;
+ off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+ MDP4_CSC_POST_LV_OFF);
+
+ for (i = 0; i < 6; i++) {
+ outpdw(off, csc_post_lv_tab[i]);
+ off++;
+ }
+}
+
+char gc_lut[] = {
+ 0x0, 0x1, 0x2, 0x2, 0x3, 0x4, 0x5, 0x6,
+ 0x6, 0x7, 0x8, 0x9, 0xA, 0xA, 0xB, 0xC,
+ 0xD, 0xD, 0xE, 0xF, 0xF, 0x10, 0x10, 0x11,
+ 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x15, 0x15,
+ 0x16, 0x16, 0x17, 0x17, 0x17, 0x18, 0x18, 0x19,
+ 0x19, 0x19, 0x1A, 0x1A, 0x1B, 0x1B, 0x1B, 0x1C,
+ 0x1C, 0x1D, 0x1D, 0x1D, 0x1E, 0x1E, 0x1E, 0x1F,
+ 0x1F, 0x1F, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21,
+ 0x22, 0x22, 0x22, 0x22, 0x23, 0x23, 0x23, 0x24,
+ 0x24, 0x24, 0x25, 0x25, 0x25, 0x25, 0x26, 0x26,
+ 0x26, 0x26, 0x27, 0x27, 0x27, 0x28, 0x28, 0x28,
+ 0x28, 0x29, 0x29, 0x29, 0x29, 0x2A, 0x2A, 0x2A,
+ 0x2A, 0x2B, 0x2B, 0x2B, 0x2B, 0x2B, 0x2C, 0x2C,
+ 0x2C, 0x2C, 0x2D, 0x2D, 0x2D, 0x2D, 0x2E, 0x2E,
+ 0x2E, 0x2E, 0x2E, 0x2F, 0x2F, 0x2F, 0x2F, 0x30,
+ 0x30, 0x30, 0x30, 0x30, 0x31, 0x31, 0x31, 0x31,
+ 0x31, 0x32, 0x32, 0x32, 0x32, 0x32, 0x33, 0x33,
+ 0x33, 0x33, 0x33, 0x34, 0x34, 0x34, 0x34, 0x34,
+ 0x35, 0x35, 0x35, 0x35, 0x35, 0x36, 0x36, 0x36,
+ 0x36, 0x36, 0x37, 0x37, 0x37, 0x37, 0x37, 0x37,
+ 0x38, 0x38, 0x38, 0x38, 0x38, 0x39, 0x39, 0x39,
+ 0x39, 0x39, 0x39, 0x3A, 0x3A, 0x3A, 0x3A, 0x3A,
+ 0x3A, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3C,
+ 0x3C, 0x3C, 0x3C, 0x3C, 0x3C, 0x3D, 0x3D, 0x3D,
+ 0x3D, 0x3D, 0x3D, 0x3E, 0x3E, 0x3E, 0x3E, 0x3E,
+ 0x3E, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x40,
+ 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x41, 0x41,
+ 0x41, 0x41, 0x41, 0x41, 0x42, 0x42, 0x42, 0x42,
+ 0x42, 0x42, 0x42, 0x43, 0x43, 0x43, 0x43, 0x43,
+ 0x43, 0x43, 0x44, 0x44, 0x44, 0x44, 0x44, 0x44,
+ 0x44, 0x45, 0x45, 0x45, 0x45, 0x45, 0x45, 0x45,
+ 0x46, 0x46, 0x46, 0x46, 0x46, 0x46, 0x46, 0x47,
+ 0x47, 0x47, 0x47, 0x47, 0x47, 0x47, 0x48, 0x48,
+ 0x48, 0x48, 0x48, 0x48, 0x48, 0x48, 0x49, 0x49,
+ 0x49, 0x49, 0x49, 0x49, 0x49, 0x4A, 0x4A, 0x4A,
+ 0x4A, 0x4A, 0x4A, 0x4A, 0x4A, 0x4B, 0x4B, 0x4B,
+ 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4C, 0x4C, 0x4C,
+ 0x4C, 0x4C, 0x4C, 0x4C, 0x4D, 0x4D, 0x4D, 0x4D,
+ 0x4D, 0x4D, 0x4D, 0x4D, 0x4E, 0x4E, 0x4E, 0x4E,
+ 0x4E, 0x4E, 0x4E, 0x4E, 0x4E, 0x4F, 0x4F, 0x4F,
+ 0x4F, 0x4F, 0x4F, 0x4F, 0x4F, 0x50, 0x50, 0x50,
+ 0x50, 0x50, 0x50, 0x50, 0x50, 0x51, 0x51, 0x51,
+ 0x51, 0x51, 0x51, 0x51, 0x51, 0x51, 0x52, 0x52,
+ 0x52, 0x52, 0x52, 0x52, 0x52, 0x52, 0x53, 0x53,
+ 0x53, 0x53, 0x53, 0x53, 0x53, 0x53, 0x53, 0x54,
+ 0x54, 0x54, 0x54, 0x54, 0x54, 0x54, 0x54, 0x54,
+ 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55,
+ 0x55, 0x56, 0x56, 0x56, 0x56, 0x56, 0x56, 0x56,
+ 0x56, 0x56, 0x57, 0x57, 0x57, 0x57, 0x57, 0x57,
+ 0x57, 0x57, 0x57, 0x58, 0x58, 0x58, 0x58, 0x58,
+ 0x58, 0x58, 0x58, 0x58, 0x58, 0x59, 0x59, 0x59,
+ 0x59, 0x59, 0x59, 0x59, 0x59, 0x59, 0x5A, 0x5A,
+ 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A,
+ 0x5B, 0x5B, 0x5B, 0x5B, 0x5B, 0x5B, 0x5B, 0x5B,
+ 0x5B, 0x5B, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C,
+ 0x5C, 0x5C, 0x5C, 0x5C, 0x5D, 0x5D, 0x5D, 0x5D,
+ 0x5D, 0x5D, 0x5D, 0x5D, 0x5D, 0x5D, 0x5E, 0x5E,
+ 0x5E, 0x5E, 0x5E, 0x5E, 0x5E, 0x5E, 0x5E, 0x5E,
+ 0x5F, 0x5F, 0x5F, 0x5F, 0x5F, 0x5F, 0x5F, 0x5F,
+ 0x5F, 0x5F, 0x60, 0x60, 0x60, 0x60, 0x60, 0x60,
+ 0x60, 0x60, 0x60, 0x60, 0x60, 0x61, 0x61, 0x61,
+ 0x61, 0x61, 0x61, 0x61, 0x61, 0x61, 0x61, 0x62,
+ 0x62, 0x62, 0x62, 0x62, 0x62, 0x62, 0x62, 0x62,
+ 0x62, 0x62, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
+ 0x63, 0x63, 0x63, 0x63, 0x63, 0x64, 0x64, 0x64,
+ 0x64, 0x64, 0x64, 0x64, 0x64, 0x64, 0x64, 0x64,
+ 0x65, 0x65, 0x65, 0x65, 0x65, 0x65, 0x65, 0x65,
+ 0x65, 0x65, 0x65, 0x66, 0x66, 0x66, 0x66, 0x66,
+ 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x67, 0x67,
+ 0x67, 0x67, 0x67, 0x67, 0x67, 0x67, 0x67, 0x67,
+ 0x67, 0x67, 0x68, 0x68, 0x68, 0x68, 0x68, 0x68,
+ 0x68, 0x68, 0x68, 0x68, 0x68, 0x69, 0x69, 0x69,
+ 0x69, 0x69, 0x69, 0x69, 0x69, 0x69, 0x69, 0x69,
+ 0x69, 0x6A, 0x6A, 0x6A, 0x6A, 0x6A, 0x6A, 0x6A,
+ 0x6A, 0x6A, 0x6A, 0x6A, 0x6A, 0x6B, 0x6B, 0x6B,
+ 0x6B, 0x6B, 0x6B, 0x6B, 0x6B, 0x6B, 0x6B, 0x6B,
+ 0x6B, 0x6C, 0x6C, 0x6C, 0x6C, 0x6C, 0x6C, 0x6C,
+ 0x6C, 0x6C, 0x6C, 0x6C, 0x6C, 0x6D, 0x6D, 0x6D,
+ 0x6D, 0x6D, 0x6D, 0x6D, 0x6D, 0x6D, 0x6D, 0x6D,
+ 0x6D, 0x6E, 0x6E, 0x6E, 0x6E, 0x6E, 0x6E, 0x6E,
+ 0x6E, 0x6E, 0x6E, 0x6E, 0x6E, 0x6F, 0x6F, 0x6F,
+ 0x6F, 0x6F, 0x6F, 0x6F, 0x6F, 0x6F, 0x6F, 0x6F,
+ 0x6F, 0x6F, 0x70, 0x70, 0x70, 0x70, 0x70, 0x70,
+ 0x70, 0x70, 0x70, 0x70, 0x70, 0x70, 0x71, 0x71,
+ 0x71, 0x71, 0x71, 0x71, 0x71, 0x71, 0x71, 0x71,
+ 0x71, 0x71, 0x71, 0x72, 0x72, 0x72, 0x72, 0x72,
+ 0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72,
+ 0x73, 0x73, 0x73, 0x73, 0x73, 0x73, 0x73, 0x73,
+ 0x73, 0x73, 0x73, 0x73, 0x73, 0x74, 0x74, 0x74,
+ 0x74, 0x74, 0x74, 0x74, 0x74, 0x74, 0x74, 0x74,
+ 0x74, 0x74, 0x75, 0x75, 0x75, 0x75, 0x75, 0x75,
+ 0x75, 0x75, 0x75, 0x75, 0x75, 0x75, 0x75, 0x75,
+ 0x76, 0x76, 0x76, 0x76, 0x76, 0x76, 0x76, 0x76,
+ 0x76, 0x76, 0x76, 0x76, 0x76, 0x77, 0x77, 0x77,
+ 0x77, 0x77, 0x77, 0x77, 0x77, 0x77, 0x77, 0x77,
+ 0x77, 0x77, 0x77, 0x78, 0x78, 0x78, 0x78, 0x78,
+ 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78,
+ 0x78, 0x79, 0x79, 0x79, 0x79, 0x79, 0x79, 0x79,
+ 0x79, 0x79, 0x79, 0x79, 0x79, 0x79, 0x7A, 0x7A,
+ 0x7A, 0x7A, 0x7A, 0x7A, 0x7A, 0x7A, 0x7A, 0x7A,
+ 0x7A, 0x7A, 0x7A, 0x7A, 0x7A, 0x7B, 0x7B, 0x7B,
+ 0x7B, 0x7B, 0x7B, 0x7B, 0x7B, 0x7B, 0x7B, 0x7B,
+ 0x7B, 0x7B, 0x7B, 0x7C, 0x7C, 0x7C, 0x7C, 0x7C,
+ 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, 0x7C,
+ 0x7C, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D,
+ 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D,
+ 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E,
+ 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7F, 0x7F,
+ 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F,
+ 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x80, 0x80, 0x80,
+ 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
+ 0x80, 0x80, 0x80, 0x80, 0x81, 0x81, 0x81, 0x81,
+ 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81,
+ 0x81, 0x81, 0x81, 0x82, 0x82, 0x82, 0x82, 0x82,
+ 0x82, 0x82, 0x82, 0x82, 0x82, 0x82, 0x82, 0x82,
+ 0x82, 0x82, 0x83, 0x83, 0x83, 0x83, 0x83, 0x83,
+ 0x83, 0x83, 0x83, 0x83, 0x83, 0x83, 0x83, 0x83,
+ 0x83, 0x83, 0x84, 0x84, 0x84, 0x84, 0x84, 0x84,
+ 0x84, 0x84, 0x84, 0x84, 0x84, 0x84, 0x84, 0x84,
+ 0x84, 0x85, 0x85, 0x85, 0x85, 0x85, 0x85, 0x85,
+ 0x85, 0x85, 0x85, 0x85, 0x85, 0x85, 0x85, 0x85,
+ 0x85, 0x86, 0x86, 0x86, 0x86, 0x86, 0x86, 0x86,
+ 0x86, 0x86, 0x86, 0x86, 0x86, 0x86, 0x86, 0x86,
+ 0x86, 0x87, 0x87, 0x87, 0x87, 0x87, 0x87, 0x87,
+ 0x87, 0x87, 0x87, 0x87, 0x87, 0x87, 0x87, 0x87,
+ 0x87, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+ 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+ 0x88, 0x89, 0x89, 0x89, 0x89, 0x89, 0x89, 0x89,
+ 0x89, 0x89, 0x89, 0x89, 0x89, 0x89, 0x89, 0x89,
+ 0x89, 0x8A, 0x8A, 0x8A, 0x8A, 0x8A, 0x8A, 0x8A,
+ 0x8A, 0x8A, 0x8A, 0x8A, 0x8A, 0x8A, 0x8A, 0x8A,
+ 0x8A, 0x8B, 0x8B, 0x8B, 0x8B, 0x8B, 0x8B, 0x8B,
+ 0x8B, 0x8B, 0x8B, 0x8B, 0x8B, 0x8B, 0x8B, 0x8B,
+ 0x8B, 0x8B, 0x8C, 0x8C, 0x8C, 0x8C, 0x8C, 0x8C,
+ 0x8C, 0x8C, 0x8C, 0x8C, 0x8C, 0x8C, 0x8C, 0x8C,
+ 0x8C, 0x8C, 0x8C, 0x8D, 0x8D, 0x8D, 0x8D, 0x8D,
+ 0x8D, 0x8D, 0x8D, 0x8D, 0x8D, 0x8D, 0x8D, 0x8D,
+ 0x8D, 0x8D, 0x8D, 0x8D, 0x8E, 0x8E, 0x8E, 0x8E,
+ 0x8E, 0x8E, 0x8E, 0x8E, 0x8E, 0x8E, 0x8E, 0x8E,
+ 0x8E, 0x8E, 0x8E, 0x8E, 0x8E, 0x8F, 0x8F, 0x8F,
+ 0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x8F,
+ 0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x90, 0x90,
+ 0x90, 0x90, 0x90, 0x90, 0x90, 0x90, 0x90, 0x90,
+ 0x90, 0x90, 0x90, 0x90, 0x90, 0x90, 0x90, 0x91,
+ 0x91, 0x91, 0x91, 0x91, 0x91, 0x91, 0x91, 0x91,
+ 0x91, 0x91, 0x91, 0x91, 0x91, 0x91, 0x91, 0x91,
+ 0x91, 0x92, 0x92, 0x92, 0x92, 0x92, 0x92, 0x92,
+ 0x92, 0x92, 0x92, 0x92, 0x92, 0x92, 0x92, 0x92,
+ 0x92, 0x92, 0x93, 0x93, 0x93, 0x93, 0x93, 0x93,
+ 0x93, 0x93, 0x93, 0x93, 0x93, 0x93, 0x93, 0x93,
+ 0x93, 0x93, 0x93, 0x93, 0x94, 0x94, 0x94, 0x94,
+ 0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x94,
+ 0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x95, 0x95,
+ 0x95, 0x95, 0x95, 0x95, 0x95, 0x95, 0x95, 0x95,
+ 0x95, 0x95, 0x95, 0x95, 0x95, 0x95, 0x95, 0x95,
+ 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96,
+ 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96,
+ 0x96, 0x96, 0x96, 0x97, 0x97, 0x97, 0x97, 0x97,
+ 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97,
+ 0x97, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x98,
+ 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98,
+ 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98,
+ 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99,
+ 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99,
+ 0x99, 0x99, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A,
+ 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A,
+ 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B,
+ 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B,
+ 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B,
+ 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C,
+ 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C,
+ 0x9C, 0x9C, 0x9C, 0x9C, 0x9D, 0x9D, 0x9D, 0x9D,
+ 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D,
+ 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9E,
+ 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E,
+ 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E,
+ 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F,
+ 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F,
+ 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0xA0, 0xA0,
+ 0xA0, 0xA0, 0xA0, 0xA0, 0xA0, 0xA0, 0xA0, 0xA0,
+ 0xA0, 0xA0, 0xA0, 0xA0, 0xA0, 0xA0, 0xA0, 0xA0,
+ 0xA0, 0xA0, 0xA1, 0xA1, 0xA1, 0xA1, 0xA1, 0xA1,
+ 0xA1, 0xA1, 0xA1, 0xA1, 0xA1, 0xA1, 0xA1, 0xA1,
+ 0xA1, 0xA1, 0xA1, 0xA1, 0xA1, 0xA1, 0xA2, 0xA2,
+ 0xA2, 0xA2, 0xA2, 0xA2, 0xA2, 0xA2, 0xA2, 0xA2,
+ 0xA2, 0xA2, 0xA2, 0xA2, 0xA2, 0xA2, 0xA2, 0xA2,
+ 0xA2, 0xA2, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3,
+ 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3,
+ 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA4, 0xA4,
+ 0xA4, 0xA4, 0xA4, 0xA4, 0xA4, 0xA4, 0xA4, 0xA4,
+ 0xA4, 0xA4, 0xA4, 0xA4, 0xA4, 0xA4, 0xA4, 0xA4,
+ 0xA4, 0xA4, 0xA4, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5,
+ 0xA5, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5,
+ 0xA5, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5,
+ 0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6,
+ 0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6,
+ 0xA6, 0xA6, 0xA6, 0xA6, 0xA7, 0xA7, 0xA7, 0xA7,
+ 0xA7, 0xA7, 0xA7, 0xA7, 0xA7, 0xA7, 0xA7, 0xA7,
+ 0xA7, 0xA7, 0xA7, 0xA7, 0xA7, 0xA7, 0xA7, 0xA7,
+ 0xA7, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8,
+ 0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8,
+ 0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA9,
+ 0xA9, 0xA9, 0xA9, 0xA9, 0xA9, 0xA9, 0xA9, 0xA9,
+ 0xA9, 0xA9, 0xA9, 0xA9, 0xA9, 0xA9, 0xA9, 0xA9,
+ 0xA9, 0xA9, 0xA9, 0xA9, 0xAA, 0xAA, 0xAA, 0xAA,
+ 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
+ 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
+ 0xAA, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB,
+ 0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB,
+ 0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAC,
+ 0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAC,
+ 0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAC,
+ 0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAD, 0xAD, 0xAD,
+ 0xAD, 0xAD, 0xAD, 0xAD, 0xAD, 0xAD, 0xAD, 0xAD,
+ 0xAD, 0xAD, 0xAD, 0xAD, 0xAD, 0xAD, 0xAD, 0xAD,
+ 0xAD, 0xAD, 0xAD, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE,
+ 0xAE, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE,
+ 0xAE, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE,
+ 0xAE, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF,
+ 0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF,
+ 0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xB0,
+ 0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0,
+ 0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0,
+ 0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB1, 0xB1,
+ 0xB1, 0xB1, 0xB1, 0xB1, 0xB1, 0xB1, 0xB1, 0xB1,
+ 0xB1, 0xB1, 0xB1, 0xB1, 0xB1, 0xB1, 0xB1, 0xB1,
+ 0xB1, 0xB1, 0xB1, 0xB1, 0xB2, 0xB2, 0xB2, 0xB2,
+ 0xB2, 0xB2, 0xB2, 0xB2, 0xB2, 0xB2, 0xB2, 0xB2,
+ 0xB2, 0xB2, 0xB2, 0xB2, 0xB2, 0xB2, 0xB2, 0xB2,
+ 0xB2, 0xB2, 0xB2, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3,
+ 0xB3, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3,
+ 0xB3, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3,
+ 0xB3, 0xB3, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4,
+ 0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4,
+ 0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4,
+ 0xB4, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5,
+ 0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5,
+ 0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5,
+ 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6,
+ 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6,
+ 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6,
+ 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7,
+ 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7,
+ 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB8,
+ 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8,
+ 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8,
+ 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB9,
+ 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9,
+ 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9,
+ 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xBA,
+ 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA,
+ 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA,
+ 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBB,
+ 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB,
+ 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB,
+ 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB,
+ 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC,
+ 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC,
+ 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC,
+ 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD,
+ 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD,
+ 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD,
+ 0xBD, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE,
+ 0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE,
+ 0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE,
+ 0xBE, 0xBE, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF,
+ 0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF,
+ 0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF,
+ 0xBF, 0xBF, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0,
+ 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0,
+ 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0,
+ 0xC0, 0xC0, 0xC0, 0xC0, 0xC1, 0xC1, 0xC1, 0xC1,
+ 0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC1,
+ 0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC1,
+ 0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC2, 0xC2, 0xC2,
+ 0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2,
+ 0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2,
+ 0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC3, 0xC3,
+ 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3,
+ 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3,
+ 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3,
+ 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4,
+ 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4,
+ 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4,
+ 0xC4, 0xC4, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5,
+ 0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5,
+ 0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5,
+ 0xC5, 0xC5, 0xC5, 0xC5, 0xC6, 0xC6, 0xC6, 0xC6,
+ 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6,
+ 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6,
+ 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC7, 0xC7,
+ 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7,
+ 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7,
+ 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7,
+ 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
+ 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
+ 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
+ 0xC8, 0xC8, 0xC8, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9,
+ 0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9,
+ 0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9,
+ 0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xCA, 0xCA,
+ 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA,
+ 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA,
+ 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA,
+ 0xCA, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB,
+ 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB,
+ 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB,
+ 0xCB, 0xCB, 0xCB, 0xCB, 0xCC, 0xCC, 0xCC, 0xCC,
+ 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC,
+ 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC,
+ 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCD,
+ 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD,
+ 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD,
+ 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD,
+ 0xCD, 0xCD, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE,
+ 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE,
+ 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE,
+ 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCF, 0xCF,
+ 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF,
+ 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF,
+ 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF,
+ 0xCF, 0xCF, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0,
+ 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0,
+ 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0,
+ 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD1, 0xD1, 0xD1,
+ 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1,
+ 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1,
+ 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1,
+ 0xD1, 0xD1, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2,
+ 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2,
+ 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2,
+ 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD3, 0xD3,
+ 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3,
+ 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3,
+ 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3,
+ 0xD3, 0xD3, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4,
+ 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4,
+ 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4,
+ 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD5,
+ 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5,
+ 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5,
+ 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5,
+ 0xD5, 0xD5, 0xD5, 0xD5, 0xD6, 0xD6, 0xD6, 0xD6,
+ 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6,
+ 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6,
+ 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6,
+ 0xD6, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7,
+ 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7,
+ 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7,
+ 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD8, 0xD8,
+ 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8,
+ 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8,
+ 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8,
+ 0xD8, 0xD8, 0xD8, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9,
+ 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9,
+ 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9,
+ 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9,
+ 0xD9, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA,
+ 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA,
+ 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA,
+ 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDB, 0xDB,
+ 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB,
+ 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB,
+ 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB,
+ 0xDB, 0xDB, 0xDB, 0xDB, 0xDC, 0xDC, 0xDC, 0xDC,
+ 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC,
+ 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC,
+ 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC,
+ 0xDC, 0xDC, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD,
+ 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD,
+ 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD,
+ 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD,
+ 0xDD, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE,
+ 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE,
+ 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE,
+ 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDF,
+ 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF,
+ 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF,
+ 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF,
+ 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xE0, 0xE0,
+ 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0,
+ 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0,
+ 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0,
+ 0xE0, 0xE0, 0xE0, 0xE0, 0xE1, 0xE1, 0xE1, 0xE1,
+ 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1,
+ 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1,
+ 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1,
+ 0xE1, 0xE1, 0xE1, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2,
+ 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2,
+ 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2,
+ 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2,
+ 0xE2, 0xE2, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3,
+ 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3,
+ 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3,
+ 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3,
+ 0xE3, 0xE3, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4,
+ 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4,
+ 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4,
+ 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4,
+ 0xE4, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5,
+ 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5,
+ 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5,
+ 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5,
+ 0xE5, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6,
+ 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6,
+ 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6,
+ 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6,
+ 0xE6, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7,
+ 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7,
+ 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7,
+ 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7,
+ 0xE7, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8,
+ 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8,
+ 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8,
+ 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8,
+ 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9,
+ 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9,
+ 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9,
+ 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9,
+ 0xE9, 0xE9, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA,
+ 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA,
+ 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA,
+ 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA,
+ 0xEA, 0xEA, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB,
+ 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB,
+ 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB,
+ 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB,
+ 0xEB, 0xEB, 0xEB, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC,
+ 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC,
+ 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC,
+ 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC,
+ 0xEC, 0xEC, 0xEC, 0xEC, 0xED, 0xED, 0xED, 0xED,
+ 0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED,
+ 0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED,
+ 0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED,
+ 0xED, 0xED, 0xED, 0xED, 0xED, 0xEE, 0xEE, 0xEE,
+ 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
+ 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
+ 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
+ 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEF, 0xEF,
+ 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF,
+ 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF,
+ 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF,
+ 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF,
+ 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
+ 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
+ 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
+ 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
+ 0xF0, 0xF0, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1,
+ 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1,
+ 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1,
+ 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1,
+ 0xF1, 0xF1, 0xF1, 0xF1, 0xF2, 0xF2, 0xF2, 0xF2,
+ 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2,
+ 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2,
+ 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2,
+ 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF3, 0xF3,
+ 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3,
+ 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3,
+ 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3,
+ 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3,
+ 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4,
+ 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4,
+ 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4,
+ 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4,
+ 0xF4, 0xF4, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5,
+ 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5,
+ 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5,
+ 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5,
+ 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF6, 0xF6, 0xF6,
+ 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6,
+ 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6,
+ 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6,
+ 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6,
+ 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7,
+ 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7,
+ 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7,
+ 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7,
+ 0xF7, 0xF7, 0xF7, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8,
+ 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8,
+ 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8,
+ 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8,
+ 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF9, 0xF9,
+ 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9,
+ 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9,
+ 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9,
+ 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9,
+ 0xF9, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA,
+ 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA,
+ 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA,
+ 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA,
+ 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFB, 0xFB, 0xFB,
+ 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB,
+ 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB,
+ 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB,
+ 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB,
+ 0xFB, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC,
+ 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC,
+ 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC,
+ 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC,
+ 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFD, 0xFD, 0xFD,
+ 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD,
+ 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD,
+ 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD,
+ 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD,
+ 0xFD, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE,
+ 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE,
+ 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE,
+ 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE,
+ 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+};
+
+void mdp4_mixer_gc_lut_setup(int mixer_num)
+{
+ unsigned char *base;
+ uint32 data;
+ char val;
+ int i, off;
+
+ if (mixer_num) /* mixer number, /dev/fb0, /dev/fb1 */
+ base = MDP_BASE + MDP4_OVERLAYPROC1_BASE;/* 0x18000 */
+ else
+ base = MDP_BASE + MDP4_OVERLAYPROC0_BASE;/* 0x10000 */
+
+ base += 0x4000; /* GC_LUT offset */
+
+ off = 0;
+ for (i = 0; i < 4096; i++) {
+ val = gc_lut[i];
+ data = (val << 16 | val << 8 | val); /* R, B, and G are same */
+ outpdw(base + off, data);
+ off += 4;
+ }
+}
+
+uint32 igc_video_lut[] = { /* non linear */
+ 0x0, 0x1, 0x2, 0x4, 0x5, 0x6, 0x7, 0x9,
+ 0xA, 0xB, 0xC, 0xE, 0xF, 0x10, 0x12, 0x14,
+ 0x15, 0x17, 0x19, 0x1B, 0x1D, 0x1F, 0x21, 0x23,
+ 0x25, 0x28, 0x2A, 0x2D, 0x30, 0x32, 0x35, 0x38,
+ 0x3B, 0x3E, 0x42, 0x45, 0x48, 0x4C, 0x4F, 0x53,
+ 0x57, 0x5B, 0x5F, 0x63, 0x67, 0x6B, 0x70, 0x74,
+ 0x79, 0x7E, 0x83, 0x88, 0x8D, 0x92, 0x97, 0x9C,
+ 0xA2, 0xA8, 0xAD, 0xB3, 0xB9, 0xBF, 0xC5, 0xCC,
+ 0xD2, 0xD8, 0xDF, 0xE6, 0xED, 0xF4, 0xFB, 0x102,
+ 0x109, 0x111, 0x118, 0x120, 0x128, 0x130, 0x138, 0x140,
+ 0x149, 0x151, 0x15A, 0x162, 0x16B, 0x174, 0x17D, 0x186,
+ 0x190, 0x199, 0x1A3, 0x1AC, 0x1B6, 0x1C0, 0x1CA, 0x1D5,
+ 0x1DF, 0x1EA, 0x1F4, 0x1FF, 0x20A, 0x215, 0x220, 0x22B,
+ 0x237, 0x242, 0x24E, 0x25A, 0x266, 0x272, 0x27F, 0x28B,
+ 0x298, 0x2A4, 0x2B1, 0x2BE, 0x2CB, 0x2D8, 0x2E6, 0x2F3,
+ 0x301, 0x30F, 0x31D, 0x32B, 0x339, 0x348, 0x356, 0x365,
+ 0x374, 0x383, 0x392, 0x3A1, 0x3B1, 0x3C0, 0x3D0, 0x3E0,
+ 0x3F0, 0x400, 0x411, 0x421, 0x432, 0x443, 0x454, 0x465,
+ 0x476, 0x487, 0x499, 0x4AB, 0x4BD, 0x4CF, 0x4E1, 0x4F3,
+ 0x506, 0x518, 0x52B, 0x53E, 0x551, 0x565, 0x578, 0x58C,
+ 0x5A0, 0x5B3, 0x5C8, 0x5DC, 0x5F0, 0x605, 0x61A, 0x62E,
+ 0x643, 0x659, 0x66E, 0x684, 0x699, 0x6AF, 0x6C5, 0x6DB,
+ 0x6F2, 0x708, 0x71F, 0x736, 0x74D, 0x764, 0x77C, 0x793,
+ 0x7AB, 0x7C3, 0x7DB, 0x7F3, 0x80B, 0x824, 0x83D, 0x855,
+ 0x86F, 0x888, 0x8A1, 0x8BB, 0x8D4, 0x8EE, 0x908, 0x923,
+ 0x93D, 0x958, 0x973, 0x98E, 0x9A9, 0x9C4, 0x9DF, 0x9FB,
+ 0xA17, 0xA33, 0xA4F, 0xA6C, 0xA88, 0xAA5, 0xAC2, 0xADF,
+ 0xAFC, 0xB19, 0xB37, 0xB55, 0xB73, 0xB91, 0xBAF, 0xBCE,
+ 0xBEC, 0xC0B, 0xC2A, 0xC4A, 0xC69, 0xC89, 0xCA8, 0xCC8,
+ 0xCE8, 0xD09, 0xD29, 0xD4A, 0xD6B, 0xD8C, 0xDAD, 0xDCF,
+ 0xDF0, 0xE12, 0xE34, 0xE56, 0xE79, 0xE9B, 0xEBE, 0xEE1,
+ 0xF04, 0xF27, 0xF4B, 0xF6E, 0xF92, 0xFB6, 0xFDB, 0xFFF,
+};
+
+void mdp4_vg_igc_lut_setup(int vp_num)
+{
+ unsigned char *base;
+ int i, voff, off;
+ uint32 data, val;
+
+ voff = MDP4_VIDEO_OFF * vp_num;
+ base = MDP_BASE + MDP4_VIDEO_BASE + voff + 0x5000;
+
+ off = 0;
+ for (i = 0; i < 256; i++) {
+ val = igc_video_lut[i];
+ data = (val << 16 | val); /* color 0 and 1 */
+ outpdw(base + off, data);
+ outpdw(base + off + 0x800, val); /* color 2 */
+ off += 4;
+ }
+}
+
+uint32 igc_rgb_lut[] = { /* linear */
+ 0x0, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70,
+ 0x80, 0x91, 0xA1, 0xB1, 0xC1, 0xD1, 0xE1, 0xF1,
+ 0x101, 0x111, 0x121, 0x131, 0x141, 0x151, 0x161, 0x171,
+ 0x181, 0x191, 0x1A2, 0x1B2, 0x1C2, 0x1D2, 0x1E2, 0x1F2,
+ 0x202, 0x212, 0x222, 0x232, 0x242, 0x252, 0x262, 0x272,
+ 0x282, 0x292, 0x2A2, 0x2B3, 0x2C3, 0x2D3, 0x2E3, 0x2F3,
+ 0x303, 0x313, 0x323, 0x333, 0x343, 0x353, 0x363, 0x373,
+ 0x383, 0x393, 0x3A3, 0x3B3, 0x3C4, 0x3D4, 0x3E4, 0x3F4,
+ 0x404, 0x414, 0x424, 0x434, 0x444, 0x454, 0x464, 0x474,
+ 0x484, 0x494, 0x4A4, 0x4B4, 0x4C4, 0x4D5, 0x4E5, 0x4F5,
+ 0x505, 0x515, 0x525, 0x535, 0x545, 0x555, 0x565, 0x575,
+ 0x585, 0x595, 0x5A5, 0x5B5, 0x5C5, 0x5D5, 0x5E6, 0x5F6,
+ 0x606, 0x616, 0x626, 0x636, 0x646, 0x656, 0x666, 0x676,
+ 0x686, 0x696, 0x6A6, 0x6B6, 0x6C6, 0x6D6, 0x6E6, 0x6F7,
+ 0x707, 0x717, 0x727, 0x737, 0x747, 0x757, 0x767, 0x777,
+ 0x787, 0x797, 0x7A7, 0x7B7, 0x7C7, 0x7D7, 0x7E7, 0x7F7,
+ 0x808, 0x818, 0x828, 0x838, 0x848, 0x858, 0x868, 0x878,
+ 0x888, 0x898, 0x8A8, 0x8B8, 0x8C8, 0x8D8, 0x8E8, 0x8F8,
+ 0x908, 0x919, 0x929, 0x939, 0x949, 0x959, 0x969, 0x979,
+ 0x989, 0x999, 0x9A9, 0x9B9, 0x9C9, 0x9D9, 0x9E9, 0x9F9,
+ 0xA09, 0xA19, 0xA2A, 0xA3A, 0xA4A, 0xA5A, 0xA6A, 0xA7A,
+ 0xA8A, 0xA9A, 0xAAA, 0xABA, 0xACA, 0xADA, 0xAEA, 0xAFA,
+ 0xB0A, 0xB1A, 0xB2A, 0xB3B, 0xB4B, 0xB5B, 0xB6B, 0xB7B,
+ 0xB8B, 0xB9B, 0xBAB, 0xBBB, 0xBCB, 0xBDB, 0xBEB, 0xBFB,
+ 0xC0B, 0xC1B, 0xC2B, 0xC3B, 0xC4C, 0xC5C, 0xC6C, 0xC7C,
+ 0xC8C, 0xC9C, 0xCAC, 0xCBC, 0xCCC, 0xCDC, 0xCEC, 0xCFC,
+ 0xD0C, 0xD1C, 0xD2C, 0xD3C, 0xD4C, 0xD5D, 0xD6D, 0xD7D,
+ 0xD8D, 0xD9D, 0xDAD, 0xDBD, 0xDCD, 0xDDD, 0xDED, 0xDFD,
+ 0xE0D, 0xE1D, 0xE2D, 0xE3D, 0xE4D, 0xE5D, 0xE6E, 0xE7E,
+ 0xE8E, 0xE9E, 0xEAE, 0xEBE, 0xECE, 0xEDE, 0xEEE, 0xEFE,
+ 0xF0E, 0xF1E, 0xF2E, 0xF3E, 0xF4E, 0xF5E, 0xF6E, 0xF7F,
+ 0xF8F, 0xF9F, 0xFAF, 0xFBF, 0xFCF, 0xFDF, 0xFEF, 0xFFF,
+};
+
+void mdp4_rgb_igc_lut_setup(int num)
+{
+ unsigned char *base;
+ int i, voff, off;
+ uint32 data, val;
+
+ voff = MDP4_RGB_OFF * num;
+ base = MDP_BASE + MDP4_RGB_BASE + voff + 0x5000;
+
+ off = 0;
+ for (i = 0; i < 256; i++) {
+ val = igc_rgb_lut[i];
+ data = (val << 16 | val); /* color 0 and 1 */
+ outpdw(base + off, data);
+ outpdw(base + off + 0x800, val); /* color 2 */
+ off += 4;
+ }
+}
diff --git a/drivers/staging/msm/mdp_cursor.c b/drivers/staging/msm/mdp_cursor.c
new file mode 100644
index 0000000..7d28f30
--- /dev/null
+++ b/drivers/staging/msm/mdp_cursor.c
@@ -0,0 +1,104 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+
+static int cursor_enabled;
+
+int mdp_hw_cursor_update(struct fb_info *info, struct fb_cursor *cursor)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+ struct fb_image *img = &cursor->image;
+ int calpha_en, transp_en;
+ int alpha;
+ int ret = 0;
+
+ if ((img->width > MDP_CURSOR_WIDTH) ||
+ (img->height > MDP_CURSOR_HEIGHT) ||
+ (img->depth != 32))
+ return -EINVAL;
+
+ if (cursor->set & FB_CUR_SETPOS)
+ MDP_OUTP(MDP_BASE + 0x9004c, (img->dy << 16) | img->dx);
+
+ if (cursor->set & FB_CUR_SETIMAGE) {
+ ret = copy_from_user(mfd->cursor_buf, img->data,
+ img->width*img->height*4);
+ if (ret)
+ return ret;
+
+ if (img->bg_color == 0xffffffff)
+ transp_en = 0;
+ else
+ transp_en = 1;
+
+ alpha = (img->fg_color & 0xff000000) >> 24;
+
+ if (alpha)
+ calpha_en = 0x2; /* xrgb */
+ else
+ calpha_en = 0x1; /* argb */
+
+ MDP_OUTP(MDP_BASE + 0x90044, (img->height << 16) | img->width);
+ MDP_OUTP(MDP_BASE + 0x90048, mfd->cursor_buf_phys);
+ /* order the writes the cursor_buf before updating the
+ * hardware */
+// dma_coherent_pre_ops();
+ MDP_OUTP(MDP_BASE + 0x90060,
+ (transp_en << 3) | (calpha_en << 1) |
+ (inp32(MDP_BASE + 0x90060) & 0x1));
+#ifdef CONFIG_FB_MSM_MDP40
+ MDP_OUTP(MDP_BASE + 0x90064, (alpha << 24));
+ MDP_OUTP(MDP_BASE + 0x90068, (0xffffff & img->bg_color));
+ MDP_OUTP(MDP_BASE + 0x9006C, (0xffffff & img->bg_color));
+#else
+ MDP_OUTP(MDP_BASE + 0x90064,
+ (alpha << 24) | (0xffffff & img->bg_color));
+ MDP_OUTP(MDP_BASE + 0x90068, 0);
+#endif
+ }
+
+ if ((cursor->enable) && (!cursor_enabled)) {
+ cursor_enabled = 1;
+ MDP_OUTP(MDP_BASE + 0x90060, inp32(MDP_BASE + 0x90060) | 0x1);
+ } else if ((!cursor->enable) && (cursor_enabled)) {
+ cursor_enabled = 0;
+ MDP_OUTP(MDP_BASE + 0x90060,
+ inp32(MDP_BASE + 0x90060) & (~0x1));
+ }
+
+ return 0;
+}
diff --git a/drivers/staging/msm/mdp_dma.c b/drivers/staging/msm/mdp_dma.c
new file mode 100644
index 0000000..639918b
--- /dev/null
+++ b/drivers/staging/msm/mdp_dma.c
@@ -0,0 +1,561 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mddihost.h"
+
+static uint32 mdp_last_dma2_update_width;
+static uint32 mdp_last_dma2_update_height;
+static uint32 mdp_curr_dma2_update_width;
+static uint32 mdp_curr_dma2_update_height;
+
+ktime_t mdp_dma2_last_update_time = { 0 };
+
+int mdp_lcd_rd_cnt_offset_slow = 20;
+int mdp_lcd_rd_cnt_offset_fast = 20;
+int mdp_vsync_usec_wait_line_too_short = 5;
+uint32 mdp_dma2_update_time_in_usec;
+uint32 mdp_total_vdopkts;
+
+extern u32 msm_fb_debug_enabled;
+extern struct workqueue_struct *mdp_dma_wq;
+
+int vsync_start_y_adjust = 4;
+
+static void mdp_dma2_update_lcd(struct msm_fb_data_type *mfd)
+{
+ MDPIBUF *iBuf = &mfd->ibuf;
+ int mddi_dest = FALSE;
+ uint32 outBpp = iBuf->bpp;
+ uint32 dma2_cfg_reg;
+ uint8 *src;
+ uint32 mddi_ld_param;
+ uint16 mddi_vdo_packet_reg;
+ struct msm_fb_panel_data *pdata =
+ (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data;
+ uint32 ystride = mfd->fbi->fix.line_length;
+
+ dma2_cfg_reg = DMA_PACK_TIGHT | DMA_PACK_ALIGN_LSB |
+ DMA_OUT_SEL_AHB | DMA_IBUF_NONCONTIGUOUS;
+
+#ifdef CONFIG_FB_MSM_MDP30
+ /*
+ * Software workaround: On 7x25/7x27, the MDP will not
+ * respond if dma_w is 1 pixel. Set the update width to
+ * 2 pixels and adjust the x offset if needed.
+ */
+ if (iBuf->dma_w == 1) {
+ iBuf->dma_w = 2;
+ if (iBuf->dma_x == (iBuf->ibuf_width - 2))
+ iBuf->dma_x--;
+ }
+#endif
+
+ if (mfd->fb_imgType == MDP_BGR_565)
+ dma2_cfg_reg |= DMA_PACK_PATTERN_BGR;
+ else
+ dma2_cfg_reg |= DMA_PACK_PATTERN_RGB;
+
+ if (outBpp == 4)
+ dma2_cfg_reg |= DMA_IBUF_C3ALPHA_EN;
+
+ if (outBpp == 2)
+ dma2_cfg_reg |= DMA_IBUF_FORMAT_RGB565;
+
+ mddi_ld_param = 0;
+ mddi_vdo_packet_reg = mfd->panel_info.mddi.vdopkt;
+
+ if ((mfd->panel_info.type == MDDI_PANEL) ||
+ (mfd->panel_info.type == EXT_MDDI_PANEL)) {
+ dma2_cfg_reg |= DMA_OUT_SEL_MDDI;
+ mddi_dest = TRUE;
+
+ if (mfd->panel_info.type == MDDI_PANEL) {
+ mdp_total_vdopkts++;
+ if (mfd->panel_info.pdest == DISPLAY_1) {
+ dma2_cfg_reg |= DMA_MDDI_DMAOUT_LCD_SEL_PRIMARY;
+ mddi_ld_param = 0;
+#ifdef MDDI_HOST_WINDOW_WORKAROUND
+ mddi_window_adjust(mfd, iBuf->dma_x,
+ iBuf->dma_w - 1, iBuf->dma_y,
+ iBuf->dma_h - 1);
+#endif
+ } else {
+ dma2_cfg_reg |=
+ DMA_MDDI_DMAOUT_LCD_SEL_SECONDARY;
+ mddi_ld_param = 1;
+#ifdef MDDI_HOST_WINDOW_WORKAROUND
+ mddi_window_adjust(mfd, iBuf->dma_x,
+ iBuf->dma_w - 1, iBuf->dma_y,
+ iBuf->dma_h - 1);
+#endif
+ }
+ } else {
+ dma2_cfg_reg |= DMA_MDDI_DMAOUT_LCD_SEL_EXTERNAL;
+ mddi_ld_param = 2;
+ }
+ } else {
+ if (mfd->panel_info.pdest == DISPLAY_1) {
+ dma2_cfg_reg |= DMA_AHBM_LCD_SEL_PRIMARY;
+ outp32(MDP_EBI2_LCD0, mfd->data_port_phys);
+ } else {
+ dma2_cfg_reg |= DMA_AHBM_LCD_SEL_SECONDARY;
+ outp32(MDP_EBI2_LCD1, mfd->data_port_phys);
+ }
+ }
+
+ dma2_cfg_reg |= DMA_DITHER_EN;
+
+ src = (uint8 *) iBuf->buf;
+ /* starting input address */
+ src += iBuf->dma_x * outBpp + iBuf->dma_y * ystride;
+
+ mdp_curr_dma2_update_width = iBuf->dma_w;
+ mdp_curr_dma2_update_height = iBuf->dma_h;
+
+ /* MDP cmd block enable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+#ifdef CONFIG_FB_MSM_MDP22
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0184,
+ (iBuf->dma_h << 16 | iBuf->dma_w));
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0188, src);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x018C, ystride);
+#else
+ MDP_OUTP(MDP_BASE + 0x90004, (iBuf->dma_h << 16 | iBuf->dma_w));
+ MDP_OUTP(MDP_BASE + 0x90008, src);
+ MDP_OUTP(MDP_BASE + 0x9000c, ystride);
+#endif
+
+ if (mfd->panel_info.bpp == 18) {
+ dma2_cfg_reg |= DMA_DSTC0G_6BITS | /* 666 18BPP */
+ DMA_DSTC1B_6BITS | DMA_DSTC2R_6BITS;
+ } else {
+ dma2_cfg_reg |= DMA_DSTC0G_6BITS | /* 565 16BPP */
+ DMA_DSTC1B_5BITS | DMA_DSTC2R_5BITS;
+ }
+
+ if (mddi_dest) {
+#ifdef CONFIG_FB_MSM_MDP22
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0194,
+ (iBuf->dma_y << 16) | iBuf->dma_x);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01a0, mddi_ld_param);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01a4,
+ (MDDI_VDO_PACKET_DESC << 16) | mddi_vdo_packet_reg);
+#else
+ MDP_OUTP(MDP_BASE + 0x90010, (iBuf->dma_y << 16) | iBuf->dma_x);
+ MDP_OUTP(MDP_BASE + 0x00090, mddi_ld_param);
+ MDP_OUTP(MDP_BASE + 0x00094,
+ (MDDI_VDO_PACKET_DESC << 16) | mddi_vdo_packet_reg);
+#endif
+ } else {
+ /* setting EBI2 LCDC write window */
+ pdata->set_rect(iBuf->dma_x, iBuf->dma_y, iBuf->dma_w,
+ iBuf->dma_h);
+ }
+
+ /* dma2 config register */
+#ifdef MDP_HW_VSYNC
+ MDP_OUTP(MDP_BASE + 0x90000, dma2_cfg_reg);
+
+ if ((mfd->use_mdp_vsync) &&
+ (mfd->ibuf.vsync_enable) && (mfd->panel_info.lcd.vsync_enable)) {
+ uint32 start_y;
+
+ if (vsync_start_y_adjust <= iBuf->dma_y)
+ start_y = iBuf->dma_y - vsync_start_y_adjust;
+ else
+ start_y =
+ (mfd->total_lcd_lines - 1) - (vsync_start_y_adjust -
+ iBuf->dma_y);
+
+ /*
+ * MDP VSYNC clock must be On by now so, we don't have to
+ * re-enable it
+ */
+ MDP_OUTP(MDP_BASE + 0x210, start_y);
+ MDP_OUTP(MDP_BASE + 0x20c, 1); /* enable prim vsync */
+ } else {
+ MDP_OUTP(MDP_BASE + 0x20c, 0); /* disable prim vsync */
+ }
+#else
+#ifdef CONFIG_FB_MSM_MDP22
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0180, dma2_cfg_reg);
+#else
+ MDP_OUTP(MDP_BASE + 0x90000, dma2_cfg_reg);
+#endif
+#endif /* MDP_HW_VSYNC */
+
+ /* MDP cmd block disable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+}
+
+static ktime_t vt = { 0 };
+int mdp_usec_diff_threshold = 100;
+int mdp_expected_usec_wait;
+
+enum hrtimer_restart mdp_dma2_vsync_hrtimer_handler(struct hrtimer *ht)
+{
+ struct msm_fb_data_type *mfd = NULL;
+
+ mfd = container_of(ht, struct msm_fb_data_type, dma_hrtimer);
+
+ mdp_pipe_kickoff(MDP_DMA2_TERM, mfd);
+
+ if (msm_fb_debug_enabled) {
+ ktime_t t;
+ int usec_diff;
+ int actual_wait;
+
+ t = ktime_get_real();
+
+ actual_wait =
+ (t.tv.sec - vt.tv.sec) * 1000000 + (t.tv.nsec -
+ vt.tv.nsec) / 1000;
+ usec_diff = actual_wait - mdp_expected_usec_wait;
+
+ if ((mdp_usec_diff_threshold < usec_diff) || (usec_diff < 0))
+ MSM_FB_DEBUG
+ ("HRT Diff = %d usec Exp=%d usec Act=%d usec\n",
+ usec_diff, mdp_expected_usec_wait, actual_wait);
+ }
+
+ return HRTIMER_NORESTART;
+}
+
+static void mdp_dma_schedule(struct msm_fb_data_type *mfd, uint32 term)
+{
+ /*
+ * dma2 configure VSYNC block
+ * vsync supported on Primary LCD only for now
+ */
+ int32 mdp_lcd_rd_cnt;
+ uint32 usec_wait_time;
+ uint32 start_y;
+
+ /*
+ * ToDo: if we can move HRT timer callback to workqueue, we can
+ * move DMA2 power on under mdp_pipe_kickoff().
+ * This will save a power for hrt time wait.
+ * However if the latency for context switch (hrt irq -> workqueue)
+ * is too big, we will miss the vsync timing.
+ */
+ if (term == MDP_DMA2_TERM)
+ mdp_pipe_ctrl(MDP_DMA2_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+ mdp_dma2_update_time_in_usec =
+ MDP_KTIME2USEC(mdp_dma2_last_update_time);
+
+ if ((!mfd->ibuf.vsync_enable) || (!mfd->panel_info.lcd.vsync_enable)
+ || (mfd->use_mdp_vsync)) {
+ mdp_pipe_kickoff(term, mfd);
+ return;
+ }
+ /* SW vsync logic starts here */
+
+ /* get current rd counter */
+ mdp_lcd_rd_cnt = mdp_get_lcd_line_counter(mfd);
+ if (mdp_dma2_update_time_in_usec != 0) {
+ uint32 num, den;
+
+ /*
+ * roi width boundary calculation to know the size of pixel
+ * width that MDP can send faster or slower than LCD read
+ * pointer
+ */
+
+ num = mdp_last_dma2_update_width * mdp_last_dma2_update_height;
+ den =
+ (((mfd->panel_info.lcd.refx100 * mfd->total_lcd_lines) /
+ 1000) * (mdp_dma2_update_time_in_usec / 100)) / 1000;
+
+ if (den == 0)
+ mfd->vsync_width_boundary[mdp_last_dma2_update_width] =
+ mfd->panel_info.xres + 1;
+ else
+ mfd->vsync_width_boundary[mdp_last_dma2_update_width] =
+ (int)(num / den);
+ }
+
+ if (mfd->vsync_width_boundary[mdp_last_dma2_update_width] >
+ mdp_curr_dma2_update_width) {
+ /* MDP wrp is faster than LCD rdp */
+ mdp_lcd_rd_cnt += mdp_lcd_rd_cnt_offset_fast;
+ } else {
+ /* MDP wrp is slower than LCD rdp */
+ mdp_lcd_rd_cnt -= mdp_lcd_rd_cnt_offset_slow;
+ }
+
+ if (mdp_lcd_rd_cnt < 0)
+ mdp_lcd_rd_cnt = mfd->total_lcd_lines + mdp_lcd_rd_cnt;
+ else if (mdp_lcd_rd_cnt > mfd->total_lcd_lines)
+ mdp_lcd_rd_cnt = mdp_lcd_rd_cnt - mfd->total_lcd_lines - 1;
+
+ /* get wrt pointer position */
+ start_y = mfd->ibuf.dma_y;
+
+ /* measure line difference between start_y and rd counter */
+ if (start_y > mdp_lcd_rd_cnt) {
+ /*
+ * *100 for lcd_ref_hzx100 was already multiplied by 100
+ * *1000000 is for usec conversion
+ */
+
+ if ((start_y - mdp_lcd_rd_cnt) <=
+ mdp_vsync_usec_wait_line_too_short)
+ usec_wait_time = 0;
+ else
+ usec_wait_time =
+ ((start_y -
+ mdp_lcd_rd_cnt) * 1000000) /
+ ((mfd->total_lcd_lines *
+ mfd->panel_info.lcd.refx100) / 100);
+ } else {
+ if ((start_y + (mfd->total_lcd_lines - mdp_lcd_rd_cnt)) <=
+ mdp_vsync_usec_wait_line_too_short)
+ usec_wait_time = 0;
+ else
+ usec_wait_time =
+ ((start_y +
+ (mfd->total_lcd_lines -
+ mdp_lcd_rd_cnt)) * 1000000) /
+ ((mfd->total_lcd_lines *
+ mfd->panel_info.lcd.refx100) / 100);
+ }
+
+ mdp_last_dma2_update_width = mdp_curr_dma2_update_width;
+ mdp_last_dma2_update_height = mdp_curr_dma2_update_height;
+
+ if (usec_wait_time == 0) {
+ mdp_pipe_kickoff(term, mfd);
+ } else {
+ ktime_t wait_time;
+
+ wait_time.tv.sec = 0;
+ wait_time.tv.nsec = usec_wait_time * 1000;
+
+ if (msm_fb_debug_enabled) {
+ vt = ktime_get_real();
+ mdp_expected_usec_wait = usec_wait_time;
+ }
+ hrtimer_start(&mfd->dma_hrtimer, wait_time, HRTIMER_MODE_REL);
+ }
+}
+
+#ifdef MDDI_HOST_WINDOW_WORKAROUND
+void mdp_dma2_update(struct msm_fb_data_type *mfd)
+{
+ MDPIBUF *iBuf;
+ uint32 upper_height;
+
+ if (mfd->panel.type == EXT_MDDI_PANEL) {
+ mdp_dma2_update_sub(mfd);
+ return;
+ }
+
+ iBuf = &mfd->ibuf;
+
+ upper_height =
+ (uint32) mddi_assign_pkt_height((uint16) iBuf->dma_w,
+ (uint16) iBuf->dma_h, 18);
+
+ if (upper_height >= iBuf->dma_h) {
+ mdp_dma2_update_sub(mfd);
+ } else {
+ MDPIBUF lower_height;
+
+ /* sending the upper region first */
+ lower_height = iBuf->dma_h - upper_height;
+ iBuf->dma_h = upper_height;
+ mdp_dma2_update_sub(mfd);
+
+ /* sending the lower region second */
+ iBuf->dma_h = lower_height;
+ iBuf->dma_y += lower_height;
+ iBuf->vsync_enable = FALSE;
+ mdp_dma2_update_sub(mfd);
+ }
+}
+
+void mdp_dma2_update_sub(struct msm_fb_data_type *mfd)
+#else
+void mdp_dma2_update(struct msm_fb_data_type *mfd)
+#endif
+{
+ down(&mfd->dma->mutex);
+ if ((mfd) && (!mfd->dma->busy) && (mfd->panel_power_on)) {
+ down(&mfd->sem);
+ mfd->ibuf_flushed = TRUE;
+ mdp_dma2_update_lcd(mfd);
+
+ mdp_enable_irq(MDP_DMA2_TERM);
+ mfd->dma->busy = TRUE;
+ INIT_COMPLETION(mfd->dma->comp);
+
+ /* schedule DMA to start */
+ mdp_dma_schedule(mfd, MDP_DMA2_TERM);
+ up(&mfd->sem);
+
+ /* wait until DMA finishes the current job */
+ wait_for_completion_killable(&mfd->dma->comp);
+ mdp_disable_irq(MDP_DMA2_TERM);
+
+ /* signal if pan function is waiting for the update completion */
+ if (mfd->pan_waiting) {
+ mfd->pan_waiting = FALSE;
+ complete(&mfd->pan_comp);
+ }
+ }
+ up(&mfd->dma->mutex);
+}
+
+void mdp_lcd_update_workqueue_handler(struct work_struct *work)
+{
+ struct msm_fb_data_type *mfd = NULL;
+
+ mfd = container_of(work, struct msm_fb_data_type, dma_update_worker);
+ if (mfd)
+ mfd->dma_fnc(mfd);
+}
+
+void mdp_set_dma_pan_info(struct fb_info *info, struct mdp_dirty_region *dirty,
+ boolean sync)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+ MDPIBUF *iBuf;
+ int bpp = info->var.bits_per_pixel / 8;
+
+ down(&mfd->sem);
+ iBuf = &mfd->ibuf;
+ iBuf->buf = (uint8 *) info->fix.smem_start;
+ iBuf->buf += info->var.xoffset * bpp +
+ info->var.yoffset * info->fix.line_length;
+
+ iBuf->ibuf_width = info->var.xres_virtual;
+ iBuf->bpp = bpp;
+
+ iBuf->vsync_enable = sync;
+
+ if (dirty) {
+ /*
+ * ToDo: dirty region check inside var.xoffset+xres
+ * <-> var.yoffset+yres
+ */
+ iBuf->dma_x = dirty->xoffset % info->var.xres;
+ iBuf->dma_y = dirty->yoffset % info->var.yres;
+ iBuf->dma_w = dirty->width;
+ iBuf->dma_h = dirty->height;
+ } else {
+ iBuf->dma_x = 0;
+ iBuf->dma_y = 0;
+ iBuf->dma_w = info->var.xres;
+ iBuf->dma_h = info->var.yres;
+ }
+ mfd->ibuf_flushed = FALSE;
+ up(&mfd->sem);
+}
+
+void mdp_set_offset_info(struct fb_info *info, uint32 addr, uint32 sync)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+ MDPIBUF *iBuf;
+
+ int bpp = info->var.bits_per_pixel / 8;
+
+ down(&mfd->sem);
+ iBuf = &mfd->ibuf;
+ iBuf->ibuf_width = info->var.xres_virtual;
+ iBuf->bpp = bpp;
+ iBuf->vsync_enable = sync;
+ iBuf->dma_x = 0;
+ iBuf->dma_y = 0;
+ iBuf->dma_w = info->var.xres;
+ iBuf->dma_h = info->var.yres;
+ iBuf->buf = (uint8 *) addr;
+
+ mfd->ibuf_flushed = FALSE;
+ up(&mfd->sem);
+}
+
+void mdp_dma_pan_update(struct fb_info *info)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+ MDPIBUF *iBuf;
+
+ iBuf = &mfd->ibuf;
+
+ if (mfd->sw_currently_refreshing) {
+ /* we need to wait for the pending update */
+ mfd->pan_waiting = TRUE;
+ if (!mfd->ibuf_flushed) {
+ wait_for_completion_killable(&mfd->pan_comp);
+ }
+ /* waiting for this update to complete */
+ mfd->pan_waiting = TRUE;
+ wait_for_completion_killable(&mfd->pan_comp);
+ } else
+ mfd->dma_fnc(mfd);
+}
+
+void mdp_refresh_screen(unsigned long data)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)data;
+
+ if ((mfd->sw_currently_refreshing) && (mfd->sw_refreshing_enable)) {
+ init_timer(&mfd->refresh_timer);
+ mfd->refresh_timer.function = mdp_refresh_screen;
+ mfd->refresh_timer.data = data;
+
+ if (mfd->dma->busy)
+ /* come back in 1 msec */
+ mfd->refresh_timer.expires = jiffies + (HZ / 1000);
+ else
+ mfd->refresh_timer.expires =
+ jiffies + mfd->refresh_timer_duration;
+
+ add_timer(&mfd->refresh_timer);
+
+ if (!mfd->dma->busy) {
+ if (!queue_work(mdp_dma_wq, &mfd->dma_update_worker)) {
+ MSM_FB_DEBUG("mdp_dma: can't queue_work! -> \
+ MDP/MDDI/LCD clock speed needs to be increased\n");
+ }
+ }
+ } else {
+ if (!mfd->hw_refresh)
+ complete(&mfd->refresher_comp);
+ }
+}
diff --git a/drivers/staging/msm/mdp_dma_lcdc.c b/drivers/staging/msm/mdp_dma_lcdc.c
new file mode 100644
index 0000000..b57fa1a
--- /dev/null
+++ b/drivers/staging/msm/mdp_dma_lcdc.c
@@ -0,0 +1,379 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mdp4.h"
+
+#ifdef CONFIG_FB_MSM_MDP40
+#define LCDC_BASE 0xC0000
+#define DTV_BASE 0xD0000
+#define DMA_E_BASE 0xB0000
+#else
+#define LCDC_BASE 0xE0000
+#endif
+
+#define DMA_P_BASE 0x90000
+
+extern spinlock_t mdp_spin_lock;
+#ifndef CONFIG_FB_MSM_MDP40
+extern uint32 mdp_intr_mask;
+#endif
+
+int first_pixel_start_x;
+int first_pixel_start_y;
+
+int mdp_lcdc_on(struct platform_device *pdev)
+{
+ int lcdc_width;
+ int lcdc_height;
+ int lcdc_bpp;
+ int lcdc_border_clr;
+ int lcdc_underflow_clr;
+ int lcdc_hsync_skew;
+
+ int hsync_period;
+ int hsync_ctrl;
+ int vsync_period;
+ int display_hctl;
+ int display_v_start;
+ int display_v_end;
+ int active_hctl;
+ int active_h_start;
+ int active_h_end;
+ int active_v_start;
+ int active_v_end;
+ int ctrl_polarity;
+ int h_back_porch;
+ int h_front_porch;
+ int v_back_porch;
+ int v_front_porch;
+ int hsync_pulse_width;
+ int vsync_pulse_width;
+ int hsync_polarity;
+ int vsync_polarity;
+ int data_en_polarity;
+ int hsync_start_x;
+ int hsync_end_x;
+ uint8 *buf;
+ int bpp;
+ uint32 dma2_cfg_reg;
+ struct fb_info *fbi;
+ struct fb_var_screeninfo *var;
+ struct msm_fb_data_type *mfd;
+ uint32 dma_base;
+ uint32 timer_base = LCDC_BASE;
+ uint32 block = MDP_DMA2_BLOCK;
+ int ret;
+
+ mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+ if (!mfd)
+ return -ENODEV;
+
+ if (mfd->key != MFD_KEY)
+ return -EINVAL;
+
+ fbi = mfd->fbi;
+ var = &fbi->var;
+
+ /* MDP cmd block enable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+ bpp = fbi->var.bits_per_pixel / 8;
+ buf = (uint8 *) fbi->fix.smem_start;
+ buf += fbi->var.xoffset * bpp + fbi->var.yoffset * fbi->fix.line_length;
+
+ dma2_cfg_reg = DMA_PACK_ALIGN_LSB | DMA_DITHER_EN | DMA_OUT_SEL_LCDC;
+
+ if (mfd->fb_imgType == MDP_BGR_565)
+ dma2_cfg_reg |= DMA_PACK_PATTERN_BGR;
+ else
+ dma2_cfg_reg |= DMA_PACK_PATTERN_RGB;
+
+ if (bpp == 2)
+ dma2_cfg_reg |= DMA_IBUF_FORMAT_RGB565;
+ else if (bpp == 3)
+ dma2_cfg_reg |= DMA_IBUF_FORMAT_RGB888;
+ else
+ dma2_cfg_reg |= DMA_IBUF_FORMAT_xRGB8888_OR_ARGB8888;
+
+ switch (mfd->panel_info.bpp) {
+ case 24:
+ dma2_cfg_reg |= DMA_DSTC0G_8BITS |
+ DMA_DSTC1B_8BITS | DMA_DSTC2R_8BITS;
+ break;
+
+ case 18:
+ dma2_cfg_reg |= DMA_DSTC0G_6BITS |
+ DMA_DSTC1B_6BITS | DMA_DSTC2R_6BITS;
+ break;
+
+ case 16:
+ dma2_cfg_reg |= DMA_DSTC0G_6BITS |
+ DMA_DSTC1B_5BITS | DMA_DSTC2R_5BITS;
+ break;
+
+ default:
+ printk(KERN_ERR "mdp lcdc can't support format %d bpp!\n",
+ mfd->panel_info.bpp);
+ return -ENODEV;
+ }
+
+ /* DMA register config */
+
+ dma_base = DMA_P_BASE;
+
+#ifdef CONFIG_FB_MSM_MDP40
+ if (mfd->panel.type == HDMI_PANEL)
+ dma_base = DMA_E_BASE;
+#endif
+
+ /* starting address */
+ MDP_OUTP(MDP_BASE + dma_base + 0x8, (uint32) buf);
+ /* active window width and height */
+ MDP_OUTP(MDP_BASE + dma_base + 0x4, ((fbi->var.yres) << 16) |
+ (fbi->var.xres));
+ /* buffer ystride */
+ MDP_OUTP(MDP_BASE + dma_base + 0xc, fbi->fix.line_length);
+ /* x/y coordinate = always 0 for lcdc */
+ MDP_OUTP(MDP_BASE + dma_base + 0x10, 0);
+ /* dma config */
+ MDP_OUTP(MDP_BASE + dma_base, dma2_cfg_reg);
+
+ /*
+ * LCDC timing setting
+ */
+ h_back_porch = var->left_margin;
+ h_front_porch = var->right_margin;
+ v_back_porch = var->upper_margin;
+ v_front_porch = var->lower_margin;
+ hsync_pulse_width = var->hsync_len;
+ vsync_pulse_width = var->vsync_len;
+ lcdc_border_clr = mfd->panel_info.lcdc.border_clr;
+ lcdc_underflow_clr = mfd->panel_info.lcdc.underflow_clr;
+ lcdc_hsync_skew = mfd->panel_info.lcdc.hsync_skew;
+
+ lcdc_width = mfd->panel_info.xres;
+ lcdc_height = mfd->panel_info.yres;
+ lcdc_bpp = mfd->panel_info.bpp;
+
+ hsync_period =
+ hsync_pulse_width + h_back_porch + lcdc_width + h_front_porch;
+ hsync_ctrl = (hsync_period << 16) | hsync_pulse_width;
+ hsync_start_x = hsync_pulse_width + h_back_porch;
+ hsync_end_x = hsync_period - h_front_porch - 1;
+ display_hctl = (hsync_end_x << 16) | hsync_start_x;
+
+ vsync_period =
+ (vsync_pulse_width + v_back_porch + lcdc_height +
+ v_front_porch) * hsync_period;
+ display_v_start =
+ (vsync_pulse_width + v_back_porch) * hsync_period + lcdc_hsync_skew;
+ display_v_end =
+ vsync_period - (v_front_porch * hsync_period) + lcdc_hsync_skew - 1;
+
+ if (lcdc_width != var->xres) {
+ active_h_start = hsync_start_x + first_pixel_start_x;
+ active_h_end = active_h_start + var->xres - 1;
+ active_hctl =
+ ACTIVE_START_X_EN | (active_h_end << 16) | active_h_start;
+ } else {
+ active_hctl = 0;
+ }
+
+ if (lcdc_height != var->yres) {
+ active_v_start =
+ display_v_start + first_pixel_start_y * hsync_period;
+ active_v_end = active_v_start + (var->yres) * hsync_period - 1;
+ active_v_start |= ACTIVE_START_Y_EN;
+ } else {
+ active_v_start = 0;
+ active_v_end = 0;
+ }
+
+
+#ifdef CONFIG_FB_MSM_MDP40
+ if (mfd->panel.type == HDMI_PANEL) {
+ block = MDP_DMA_E_BLOCK;
+ timer_base = DTV_BASE;
+ hsync_polarity = 0;
+ vsync_polarity = 0;
+ } else {
+ hsync_polarity = 1;
+ vsync_polarity = 1;
+ }
+
+ lcdc_underflow_clr |= 0x80000000; /* enable recovery */
+#else
+ hsync_polarity = 0;
+ vsync_polarity = 0;
+#endif
+ data_en_polarity = 0;
+
+ ctrl_polarity =
+ (data_en_polarity << 2) | (vsync_polarity << 1) | (hsync_polarity);
+
+ MDP_OUTP(MDP_BASE + timer_base + 0x4, hsync_ctrl);
+ MDP_OUTP(MDP_BASE + timer_base + 0x8, vsync_period);
+ MDP_OUTP(MDP_BASE + timer_base + 0xc, vsync_pulse_width * hsync_period);
+ if (timer_base == LCDC_BASE) {
+ MDP_OUTP(MDP_BASE + timer_base + 0x10, display_hctl);
+ MDP_OUTP(MDP_BASE + timer_base + 0x14, display_v_start);
+ MDP_OUTP(MDP_BASE + timer_base + 0x18, display_v_end);
+ MDP_OUTP(MDP_BASE + timer_base + 0x28, lcdc_border_clr);
+ MDP_OUTP(MDP_BASE + timer_base + 0x2c, lcdc_underflow_clr);
+ MDP_OUTP(MDP_BASE + timer_base + 0x30, lcdc_hsync_skew);
+ MDP_OUTP(MDP_BASE + timer_base + 0x38, ctrl_polarity);
+ MDP_OUTP(MDP_BASE + timer_base + 0x1c, active_hctl);
+ MDP_OUTP(MDP_BASE + timer_base + 0x20, active_v_start);
+ MDP_OUTP(MDP_BASE + timer_base + 0x24, active_v_end);
+ } else {
+ MDP_OUTP(MDP_BASE + timer_base + 0x18, display_hctl);
+ MDP_OUTP(MDP_BASE + timer_base + 0x1c, display_v_start);
+ MDP_OUTP(MDP_BASE + timer_base + 0x20, display_v_end);
+ MDP_OUTP(MDP_BASE + timer_base + 0x40, lcdc_border_clr);
+ MDP_OUTP(MDP_BASE + timer_base + 0x44, lcdc_underflow_clr);
+ MDP_OUTP(MDP_BASE + timer_base + 0x48, lcdc_hsync_skew);
+ MDP_OUTP(MDP_BASE + timer_base + 0x50, ctrl_polarity);
+ MDP_OUTP(MDP_BASE + timer_base + 0x2c, active_hctl);
+ MDP_OUTP(MDP_BASE + timer_base + 0x30, active_v_start);
+ MDP_OUTP(MDP_BASE + timer_base + 0x38, active_v_end);
+ }
+
+ ret = panel_next_on(pdev);
+ if (ret == 0) {
+ /* enable LCDC block */
+ MDP_OUTP(MDP_BASE + timer_base, 1);
+ mdp_pipe_ctrl(block, MDP_BLOCK_POWER_ON, FALSE);
+ }
+ /* MDP cmd block disable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+ return ret;
+}
+
+int mdp_lcdc_off(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct msm_fb_data_type *mfd;
+ uint32 timer_base = LCDC_BASE;
+ uint32 block = MDP_DMA2_BLOCK;
+
+ mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+#ifdef CONFIG_FB_MSM_MDP40
+ if (mfd->panel.type == HDMI_PANEL) {
+ block = MDP_DMA_E_BLOCK;
+ timer_base = DTV_BASE;
+ }
+#endif
+
+ /* MDP cmd block enable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+ MDP_OUTP(MDP_BASE + timer_base, 0);
+ /* MDP cmd block disable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+ mdp_pipe_ctrl(block, MDP_BLOCK_POWER_OFF, FALSE);
+
+ ret = panel_next_off(pdev);
+
+ /* delay to make sure the last frame finishes */
+ mdelay(100);
+
+ return ret;
+}
+
+void mdp_lcdc_update(struct msm_fb_data_type *mfd)
+{
+ struct fb_info *fbi = mfd->fbi;
+ uint8 *buf;
+ int bpp;
+ unsigned long flag;
+ uint32 dma_base;
+ int irq_block = MDP_DMA2_TERM;
+#ifdef CONFIG_FB_MSM_MDP40
+ int intr = INTR_DMA_P_DONE;
+#endif
+
+ if (!mfd->panel_power_on)
+ return;
+
+ /* no need to power on cmd block since it's lcdc mode */
+
+ if (!mfd->ibuf.visible_swapped) {
+ bpp = fbi->var.bits_per_pixel / 8;
+ buf = (uint8 *) fbi->fix.smem_start;
+ buf += fbi->var.xoffset * bpp +
+ fbi->var.yoffset * fbi->fix.line_length;
+ } else {
+ /* we've done something to update the pointer. */
+ bpp = mfd->ibuf.bpp;
+ buf = mfd->ibuf.buf;
+ }
+
+ dma_base = DMA_P_BASE;
+
+#ifdef CONFIG_FB_MSM_MDP40
+ if (mfd->panel.type == HDMI_PANEL) {
+ intr = INTR_DMA_E_DONE;
+ irq_block = MDP_DMA_E_TERM;
+ dma_base = DMA_E_BASE;
+ }
+#endif
+
+ /* starting address */
+ MDP_OUTP(MDP_BASE + dma_base + 0x8, (uint32) buf);
+
+ /* enable LCDC irq */
+ spin_lock_irqsave(&mdp_spin_lock, flag);
+ mdp_enable_irq(irq_block);
+ INIT_COMPLETION(mfd->dma->comp);
+ mfd->dma->waiting = TRUE;
+#ifdef CONFIG_FB_MSM_MDP40
+ outp32(MDP_INTR_CLEAR, intr);
+ mdp_intr_mask |= intr;
+ outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+#else
+ outp32(MDP_INTR_CLEAR, LCDC_FRAME_START);
+ mdp_intr_mask |= LCDC_FRAME_START;
+ outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+#endif
+ spin_unlock_irqrestore(&mdp_spin_lock, flag);
+
+ if (mfd->ibuf.vsync_enable)
+ wait_for_completion_killable(&mfd->dma->comp);
+ mdp_disable_irq(irq_block);
+}
diff --git a/drivers/staging/msm/mdp_dma_s.c b/drivers/staging/msm/mdp_dma_s.c
new file mode 100644
index 0000000..0c34a10
--- /dev/null
+++ b/drivers/staging/msm/mdp_dma_s.c
@@ -0,0 +1,139 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+
+static void mdp_dma_s_update_lcd(struct msm_fb_data_type *mfd)
+{
+ MDPIBUF *iBuf = &mfd->ibuf;
+ int mddi_dest = FALSE;
+ uint32 outBpp = iBuf->bpp;
+ uint32 dma_s_cfg_reg;
+ uint8 *src;
+ struct msm_fb_panel_data *pdata =
+ (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data;
+
+ dma_s_cfg_reg = DMA_PACK_TIGHT | DMA_PACK_ALIGN_LSB |
+ DMA_OUT_SEL_AHB | DMA_IBUF_NONCONTIGUOUS;
+
+ if (mfd->fb_imgType == MDP_BGR_565)
+ dma_s_cfg_reg |= DMA_PACK_PATTERN_BGR;
+ else
+ dma_s_cfg_reg |= DMA_PACK_PATTERN_RGB;
+
+ if (outBpp == 4)
+ dma_s_cfg_reg |= DMA_IBUF_C3ALPHA_EN;
+
+ if (outBpp == 2)
+ dma_s_cfg_reg |= DMA_IBUF_FORMAT_RGB565;
+
+ if (mfd->panel_info.pdest != DISPLAY_2) {
+ printk(KERN_ERR "error: non-secondary type through dma_s!\n");
+ return;
+ }
+
+ if (mfd->panel_info.type == MDDI_PANEL) {
+ dma_s_cfg_reg |= DMA_OUT_SEL_MDDI;
+ mddi_dest = TRUE;
+ } else {
+ dma_s_cfg_reg |= DMA_AHBM_LCD_SEL_SECONDARY;
+ outp32(MDP_EBI2_LCD1, mfd->data_port_phys);
+ }
+
+ dma_s_cfg_reg |= DMA_DITHER_EN;
+
+ src = (uint8 *) iBuf->buf;
+ /* starting input address */
+ src += (iBuf->dma_x + iBuf->dma_y * iBuf->ibuf_width) * outBpp;
+
+ /* MDP cmd block enable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+ /* PIXELSIZE */
+ MDP_OUTP(MDP_BASE + 0xa0004, (iBuf->dma_h << 16 | iBuf->dma_w));
+ MDP_OUTP(MDP_BASE + 0xa0008, src); /* ibuf address */
+ MDP_OUTP(MDP_BASE + 0xa000c, iBuf->ibuf_width * outBpp);/* ystride */
+
+ if (mfd->panel_info.bpp == 18) {
+ dma_s_cfg_reg |= DMA_DSTC0G_6BITS | /* 666 18BPP */
+ DMA_DSTC1B_6BITS | DMA_DSTC2R_6BITS;
+ } else {
+ dma_s_cfg_reg |= DMA_DSTC0G_6BITS | /* 565 16BPP */
+ DMA_DSTC1B_5BITS | DMA_DSTC2R_5BITS;
+ }
+
+ if (mddi_dest) {
+ MDP_OUTP(MDP_BASE + 0xa0010, (iBuf->dma_y << 16) | iBuf->dma_x);
+ MDP_OUTP(MDP_BASE + 0x00090, 1);
+ MDP_OUTP(MDP_BASE + 0x00094,
+ (MDDI_VDO_PACKET_DESC << 16) |
+ mfd->panel_info.mddi.vdopkt);
+ } else {
+ /* setting LCDC write window */
+ pdata->set_rect(iBuf->dma_x, iBuf->dma_y, iBuf->dma_w,
+ iBuf->dma_h);
+ }
+
+ MDP_OUTP(MDP_BASE + 0xa0000, dma_s_cfg_reg);
+
+ /* MDP cmd block disable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+ mdp_pipe_kickoff(MDP_DMA_S_TERM, mfd);
+}
+
+void mdp_dma_s_update(struct msm_fb_data_type *mfd)
+{
+ down(&mfd->dma->mutex);
+ if ((mfd) && (!mfd->dma->busy) && (mfd->panel_power_on)) {
+ down(&mfd->sem);
+ mdp_enable_irq(MDP_DMA_S_TERM);
+ mfd->dma->busy = TRUE;
+ INIT_COMPLETION(mfd->dma->comp);
+ mfd->ibuf_flushed = TRUE;
+ mdp_dma_s_update_lcd(mfd);
+ up(&mfd->sem);
+
+ /* wait until DMA finishes the current job */
+ wait_for_completion_killable(&mfd->dma->comp);
+ mdp_disable_irq(MDP_DMA_S_TERM);
+
+ /* signal if pan function is waiting for the update completion */
+ if (mfd->pan_waiting) {
+ mfd->pan_waiting = FALSE;
+ complete(&mfd->pan_comp);
+ }
+ }
+ up(&mfd->dma->mutex);
+}
diff --git a/drivers/staging/msm/mdp_dma_tv.c b/drivers/staging/msm/mdp_dma_tv.c
new file mode 100644
index 0000000..70989fb
--- /dev/null
+++ b/drivers/staging/msm/mdp_dma_tv.c
@@ -0,0 +1,142 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+#include <linux/delay.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+
+extern spinlock_t mdp_spin_lock;
+extern uint32 mdp_intr_mask;
+
+int mdp_dma3_on(struct platform_device *pdev)
+{
+ struct msm_fb_data_type *mfd;
+ struct fb_info *fbi;
+ uint8 *buf;
+ int bpp;
+ int ret = 0;
+
+ mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+ if (!mfd)
+ return -ENODEV;
+
+ if (mfd->key != MFD_KEY)
+ return -EINVAL;
+
+ fbi = mfd->fbi;
+ /* MDP cmd block enable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+ bpp = fbi->var.bits_per_pixel / 8;
+ buf = (uint8 *) fbi->fix.smem_start;
+ buf += fbi->var.xoffset * bpp +
+ fbi->var.yoffset * fbi->fix.line_length;
+
+ /* starting address[31..8] of Video frame buffer is CS0 */
+ MDP_OUTP(MDP_BASE + 0xC0008, (uint32) buf >> 3);
+
+ mdp_pipe_ctrl(MDP_DMA3_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+ MDP_OUTP(MDP_BASE + 0xC0004, 0x4c60674); /* flicker filter enabled */
+ MDP_OUTP(MDP_BASE + 0xC0010, 0x20); /* sobel treshold */
+
+ MDP_OUTP(MDP_BASE + 0xC0018, 0xeb0010); /* Y Max, Y min */
+ MDP_OUTP(MDP_BASE + 0xC001C, 0xf00010); /* Cb Max, Cb min */
+ MDP_OUTP(MDP_BASE + 0xC0020, 0xf00010); /* Cb Max, Cb min */
+
+ MDP_OUTP(MDP_BASE + 0xC000C, 0x67686970); /* add a few chars for CC */
+ MDP_OUTP(MDP_BASE + 0xC0000, 0x1); /* MDP tv out enable */
+
+ /* MDP cmd block disable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+ ret = panel_next_on(pdev);
+
+ return ret;
+}
+
+int mdp_dma3_off(struct platform_device *pdev)
+{
+ int ret = 0;
+
+ ret = panel_next_off(pdev);
+ if (ret)
+ return ret;
+
+ /* MDP cmd block enable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+ MDP_OUTP(MDP_BASE + 0xC0000, 0x0);
+ /* MDP cmd block disable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+ mdp_pipe_ctrl(MDP_DMA3_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+ /* delay to make sure the last frame finishes */
+ mdelay(100);
+
+ return ret;
+}
+
+void mdp_dma3_update(struct msm_fb_data_type *mfd)
+{
+ struct fb_info *fbi = mfd->fbi;
+ uint8 *buf;
+ int bpp;
+ unsigned long flag;
+
+ if (!mfd->panel_power_on)
+ return;
+
+ /* no need to power on cmd block since dma3 is running */
+ bpp = fbi->var.bits_per_pixel / 8;
+ buf = (uint8 *) fbi->fix.smem_start;
+ buf += fbi->var.xoffset * bpp +
+ fbi->var.yoffset * fbi->fix.line_length;
+ MDP_OUTP(MDP_BASE + 0xC0008, (uint32) buf >> 3);
+
+ spin_lock_irqsave(&mdp_spin_lock, flag);
+ mdp_enable_irq(MDP_DMA3_TERM);
+ INIT_COMPLETION(mfd->dma->comp);
+ mfd->dma->waiting = TRUE;
+
+ outp32(MDP_INTR_CLEAR, TV_OUT_DMA3_START);
+ mdp_intr_mask |= TV_OUT_DMA3_START;
+ outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+ spin_unlock_irqrestore(&mdp_spin_lock, flag);
+
+ wait_for_completion_killable(&mfd->dma->comp);
+ mdp_disable_irq(MDP_DMA3_TERM);
+}
diff --git a/drivers/staging/msm/mdp_hw_init.c b/drivers/staging/msm/mdp_hw_init.c
new file mode 100644
index 0000000..807362a
--- /dev/null
+++ b/drivers/staging/msm/mdp_hw_init.c
@@ -0,0 +1,720 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "mdp.h"
+
+/* mdp primary csc limit vector */
+uint32 mdp_plv[] = { 0x10, 0xeb, 0x10, 0xf0 };
+
+/* Color Coefficient matrix for YUV -> RGB */
+struct mdp_ccs mdp_ccs_yuv2rgb = {
+ MDP_CCS_YUV2RGB,
+ {
+ 0x254,
+ 0x000,
+ 0x331,
+ 0x254,
+ 0xff38,
+ 0xfe61,
+ 0x254,
+ 0x409,
+ 0x000,
+ },
+ {
+#ifdef CONFIG_FB_MSM_MDP31
+ 0x1f0,
+ 0x180,
+ 0x180
+#else
+ 0x10,
+ 0x80,
+ 0x80
+#endif
+ }
+};
+
+/* Color Coefficient matrix for RGB -> YUV */
+struct mdp_ccs mdp_ccs_rgb2yuv = {
+ MDP_CCS_RGB2YUV,
+ {
+ 0x83,
+ 0x102,
+ 0x32,
+ 0xffb5,
+ 0xff6c,
+ 0xe1,
+ 0xe1,
+ 0xff45,
+ 0xffdc,
+ },
+#ifdef CONFIG_FB_MSM_MDP31
+ {
+ 0x10,
+ 0x80,
+ 0x80
+ }
+#endif
+};
+
+static void mdp_load_lut_param(void)
+{
+ outpdw(MDP_BASE + 0x40800, 0x0);
+ outpdw(MDP_BASE + 0x40804, 0x151515);
+ outpdw(MDP_BASE + 0x40808, 0x1d1d1d);
+ outpdw(MDP_BASE + 0x4080c, 0x232323);
+ outpdw(MDP_BASE + 0x40810, 0x272727);
+ outpdw(MDP_BASE + 0x40814, 0x2b2b2b);
+ outpdw(MDP_BASE + 0x40818, 0x2f2f2f);
+ outpdw(MDP_BASE + 0x4081c, 0x333333);
+ outpdw(MDP_BASE + 0x40820, 0x363636);
+ outpdw(MDP_BASE + 0x40824, 0x393939);
+ outpdw(MDP_BASE + 0x40828, 0x3b3b3b);
+ outpdw(MDP_BASE + 0x4082c, 0x3e3e3e);
+ outpdw(MDP_BASE + 0x40830, 0x404040);
+ outpdw(MDP_BASE + 0x40834, 0x434343);
+ outpdw(MDP_BASE + 0x40838, 0x454545);
+ outpdw(MDP_BASE + 0x4083c, 0x474747);
+ outpdw(MDP_BASE + 0x40840, 0x494949);
+ outpdw(MDP_BASE + 0x40844, 0x4b4b4b);
+ outpdw(MDP_BASE + 0x40848, 0x4d4d4d);
+ outpdw(MDP_BASE + 0x4084c, 0x4f4f4f);
+ outpdw(MDP_BASE + 0x40850, 0x515151);
+ outpdw(MDP_BASE + 0x40854, 0x535353);
+ outpdw(MDP_BASE + 0x40858, 0x555555);
+ outpdw(MDP_BASE + 0x4085c, 0x565656);
+ outpdw(MDP_BASE + 0x40860, 0x585858);
+ outpdw(MDP_BASE + 0x40864, 0x5a5a5a);
+ outpdw(MDP_BASE + 0x40868, 0x5b5b5b);
+ outpdw(MDP_BASE + 0x4086c, 0x5d5d5d);
+ outpdw(MDP_BASE + 0x40870, 0x5e5e5e);
+ outpdw(MDP_BASE + 0x40874, 0x606060);
+ outpdw(MDP_BASE + 0x40878, 0x616161);
+ outpdw(MDP_BASE + 0x4087c, 0x636363);
+ outpdw(MDP_BASE + 0x40880, 0x646464);
+ outpdw(MDP_BASE + 0x40884, 0x666666);
+ outpdw(MDP_BASE + 0x40888, 0x676767);
+ outpdw(MDP_BASE + 0x4088c, 0x686868);
+ outpdw(MDP_BASE + 0x40890, 0x6a6a6a);
+ outpdw(MDP_BASE + 0x40894, 0x6b6b6b);
+ outpdw(MDP_BASE + 0x40898, 0x6c6c6c);
+ outpdw(MDP_BASE + 0x4089c, 0x6e6e6e);
+ outpdw(MDP_BASE + 0x408a0, 0x6f6f6f);
+ outpdw(MDP_BASE + 0x408a4, 0x707070);
+ outpdw(MDP_BASE + 0x408a8, 0x717171);
+ outpdw(MDP_BASE + 0x408ac, 0x727272);
+ outpdw(MDP_BASE + 0x408b0, 0x747474);
+ outpdw(MDP_BASE + 0x408b4, 0x757575);
+ outpdw(MDP_BASE + 0x408b8, 0x767676);
+ outpdw(MDP_BASE + 0x408bc, 0x777777);
+ outpdw(MDP_BASE + 0x408c0, 0x787878);
+ outpdw(MDP_BASE + 0x408c4, 0x797979);
+ outpdw(MDP_BASE + 0x408c8, 0x7a7a7a);
+ outpdw(MDP_BASE + 0x408cc, 0x7c7c7c);
+ outpdw(MDP_BASE + 0x408d0, 0x7d7d7d);
+ outpdw(MDP_BASE + 0x408d4, 0x7e7e7e);
+ outpdw(MDP_BASE + 0x408d8, 0x7f7f7f);
+ outpdw(MDP_BASE + 0x408dc, 0x808080);
+ outpdw(MDP_BASE + 0x408e0, 0x818181);
+ outpdw(MDP_BASE + 0x408e4, 0x828282);
+ outpdw(MDP_BASE + 0x408e8, 0x838383);
+ outpdw(MDP_BASE + 0x408ec, 0x848484);
+ outpdw(MDP_BASE + 0x408f0, 0x858585);
+ outpdw(MDP_BASE + 0x408f4, 0x868686);
+ outpdw(MDP_BASE + 0x408f8, 0x878787);
+ outpdw(MDP_BASE + 0x408fc, 0x888888);
+ outpdw(MDP_BASE + 0x40900, 0x898989);
+ outpdw(MDP_BASE + 0x40904, 0x8a8a8a);
+ outpdw(MDP_BASE + 0x40908, 0x8b8b8b);
+ outpdw(MDP_BASE + 0x4090c, 0x8c8c8c);
+ outpdw(MDP_BASE + 0x40910, 0x8d8d8d);
+ outpdw(MDP_BASE + 0x40914, 0x8e8e8e);
+ outpdw(MDP_BASE + 0x40918, 0x8f8f8f);
+ outpdw(MDP_BASE + 0x4091c, 0x8f8f8f);
+ outpdw(MDP_BASE + 0x40920, 0x909090);
+ outpdw(MDP_BASE + 0x40924, 0x919191);
+ outpdw(MDP_BASE + 0x40928, 0x929292);
+ outpdw(MDP_BASE + 0x4092c, 0x939393);
+ outpdw(MDP_BASE + 0x40930, 0x949494);
+ outpdw(MDP_BASE + 0x40934, 0x959595);
+ outpdw(MDP_BASE + 0x40938, 0x969696);
+ outpdw(MDP_BASE + 0x4093c, 0x969696);
+ outpdw(MDP_BASE + 0x40940, 0x979797);
+ outpdw(MDP_BASE + 0x40944, 0x989898);
+ outpdw(MDP_BASE + 0x40948, 0x999999);
+ outpdw(MDP_BASE + 0x4094c, 0x9a9a9a);
+ outpdw(MDP_BASE + 0x40950, 0x9b9b9b);
+ outpdw(MDP_BASE + 0x40954, 0x9c9c9c);
+ outpdw(MDP_BASE + 0x40958, 0x9c9c9c);
+ outpdw(MDP_BASE + 0x4095c, 0x9d9d9d);
+ outpdw(MDP_BASE + 0x40960, 0x9e9e9e);
+ outpdw(MDP_BASE + 0x40964, 0x9f9f9f);
+ outpdw(MDP_BASE + 0x40968, 0xa0a0a0);
+ outpdw(MDP_BASE + 0x4096c, 0xa0a0a0);
+ outpdw(MDP_BASE + 0x40970, 0xa1a1a1);
+ outpdw(MDP_BASE + 0x40974, 0xa2a2a2);
+ outpdw(MDP_BASE + 0x40978, 0xa3a3a3);
+ outpdw(MDP_BASE + 0x4097c, 0xa4a4a4);
+ outpdw(MDP_BASE + 0x40980, 0xa4a4a4);
+ outpdw(MDP_BASE + 0x40984, 0xa5a5a5);
+ outpdw(MDP_BASE + 0x40988, 0xa6a6a6);
+ outpdw(MDP_BASE + 0x4098c, 0xa7a7a7);
+ outpdw(MDP_BASE + 0x40990, 0xa7a7a7);
+ outpdw(MDP_BASE + 0x40994, 0xa8a8a8);
+ outpdw(MDP_BASE + 0x40998, 0xa9a9a9);
+ outpdw(MDP_BASE + 0x4099c, 0xaaaaaa);
+ outpdw(MDP_BASE + 0x409a0, 0xaaaaaa);
+ outpdw(MDP_BASE + 0x409a4, 0xababab);
+ outpdw(MDP_BASE + 0x409a8, 0xacacac);
+ outpdw(MDP_BASE + 0x409ac, 0xadadad);
+ outpdw(MDP_BASE + 0x409b0, 0xadadad);
+ outpdw(MDP_BASE + 0x409b4, 0xaeaeae);
+ outpdw(MDP_BASE + 0x409b8, 0xafafaf);
+ outpdw(MDP_BASE + 0x409bc, 0xafafaf);
+ outpdw(MDP_BASE + 0x409c0, 0xb0b0b0);
+ outpdw(MDP_BASE + 0x409c4, 0xb1b1b1);
+ outpdw(MDP_BASE + 0x409c8, 0xb2b2b2);
+ outpdw(MDP_BASE + 0x409cc, 0xb2b2b2);
+ outpdw(MDP_BASE + 0x409d0, 0xb3b3b3);
+ outpdw(MDP_BASE + 0x409d4, 0xb4b4b4);
+ outpdw(MDP_BASE + 0x409d8, 0xb4b4b4);
+ outpdw(MDP_BASE + 0x409dc, 0xb5b5b5);
+ outpdw(MDP_BASE + 0x409e0, 0xb6b6b6);
+ outpdw(MDP_BASE + 0x409e4, 0xb6b6b6);
+ outpdw(MDP_BASE + 0x409e8, 0xb7b7b7);
+ outpdw(MDP_BASE + 0x409ec, 0xb8b8b8);
+ outpdw(MDP_BASE + 0x409f0, 0xb8b8b8);
+ outpdw(MDP_BASE + 0x409f4, 0xb9b9b9);
+ outpdw(MDP_BASE + 0x409f8, 0xbababa);
+ outpdw(MDP_BASE + 0x409fc, 0xbababa);
+ outpdw(MDP_BASE + 0x40a00, 0xbbbbbb);
+ outpdw(MDP_BASE + 0x40a04, 0xbcbcbc);
+ outpdw(MDP_BASE + 0x40a08, 0xbcbcbc);
+ outpdw(MDP_BASE + 0x40a0c, 0xbdbdbd);
+ outpdw(MDP_BASE + 0x40a10, 0xbebebe);
+ outpdw(MDP_BASE + 0x40a14, 0xbebebe);
+ outpdw(MDP_BASE + 0x40a18, 0xbfbfbf);
+ outpdw(MDP_BASE + 0x40a1c, 0xc0c0c0);
+ outpdw(MDP_BASE + 0x40a20, 0xc0c0c0);
+ outpdw(MDP_BASE + 0x40a24, 0xc1c1c1);
+ outpdw(MDP_BASE + 0x40a28, 0xc1c1c1);
+ outpdw(MDP_BASE + 0x40a2c, 0xc2c2c2);
+ outpdw(MDP_BASE + 0x40a30, 0xc3c3c3);
+ outpdw(MDP_BASE + 0x40a34, 0xc3c3c3);
+ outpdw(MDP_BASE + 0x40a38, 0xc4c4c4);
+ outpdw(MDP_BASE + 0x40a3c, 0xc5c5c5);
+ outpdw(MDP_BASE + 0x40a40, 0xc5c5c5);
+ outpdw(MDP_BASE + 0x40a44, 0xc6c6c6);
+ outpdw(MDP_BASE + 0x40a48, 0xc6c6c6);
+ outpdw(MDP_BASE + 0x40a4c, 0xc7c7c7);
+ outpdw(MDP_BASE + 0x40a50, 0xc8c8c8);
+ outpdw(MDP_BASE + 0x40a54, 0xc8c8c8);
+ outpdw(MDP_BASE + 0x40a58, 0xc9c9c9);
+ outpdw(MDP_BASE + 0x40a5c, 0xc9c9c9);
+ outpdw(MDP_BASE + 0x40a60, 0xcacaca);
+ outpdw(MDP_BASE + 0x40a64, 0xcbcbcb);
+ outpdw(MDP_BASE + 0x40a68, 0xcbcbcb);
+ outpdw(MDP_BASE + 0x40a6c, 0xcccccc);
+ outpdw(MDP_BASE + 0x40a70, 0xcccccc);
+ outpdw(MDP_BASE + 0x40a74, 0xcdcdcd);
+ outpdw(MDP_BASE + 0x40a78, 0xcecece);
+ outpdw(MDP_BASE + 0x40a7c, 0xcecece);
+ outpdw(MDP_BASE + 0x40a80, 0xcfcfcf);
+ outpdw(MDP_BASE + 0x40a84, 0xcfcfcf);
+ outpdw(MDP_BASE + 0x40a88, 0xd0d0d0);
+ outpdw(MDP_BASE + 0x40a8c, 0xd0d0d0);
+ outpdw(MDP_BASE + 0x40a90, 0xd1d1d1);
+ outpdw(MDP_BASE + 0x40a94, 0xd2d2d2);
+ outpdw(MDP_BASE + 0x40a98, 0xd2d2d2);
+ outpdw(MDP_BASE + 0x40a9c, 0xd3d3d3);
+ outpdw(MDP_BASE + 0x40aa0, 0xd3d3d3);
+ outpdw(MDP_BASE + 0x40aa4, 0xd4d4d4);
+ outpdw(MDP_BASE + 0x40aa8, 0xd4d4d4);
+ outpdw(MDP_BASE + 0x40aac, 0xd5d5d5);
+ outpdw(MDP_BASE + 0x40ab0, 0xd6d6d6);
+ outpdw(MDP_BASE + 0x40ab4, 0xd6d6d6);
+ outpdw(MDP_BASE + 0x40ab8, 0xd7d7d7);
+ outpdw(MDP_BASE + 0x40abc, 0xd7d7d7);
+ outpdw(MDP_BASE + 0x40ac0, 0xd8d8d8);
+ outpdw(MDP_BASE + 0x40ac4, 0xd8d8d8);
+ outpdw(MDP_BASE + 0x40ac8, 0xd9d9d9);
+ outpdw(MDP_BASE + 0x40acc, 0xd9d9d9);
+ outpdw(MDP_BASE + 0x40ad0, 0xdadada);
+ outpdw(MDP_BASE + 0x40ad4, 0xdbdbdb);
+ outpdw(MDP_BASE + 0x40ad8, 0xdbdbdb);
+ outpdw(MDP_BASE + 0x40adc, 0xdcdcdc);
+ outpdw(MDP_BASE + 0x40ae0, 0xdcdcdc);
+ outpdw(MDP_BASE + 0x40ae4, 0xdddddd);
+ outpdw(MDP_BASE + 0x40ae8, 0xdddddd);
+ outpdw(MDP_BASE + 0x40aec, 0xdedede);
+ outpdw(MDP_BASE + 0x40af0, 0xdedede);
+ outpdw(MDP_BASE + 0x40af4, 0xdfdfdf);
+ outpdw(MDP_BASE + 0x40af8, 0xdfdfdf);
+ outpdw(MDP_BASE + 0x40afc, 0xe0e0e0);
+ outpdw(MDP_BASE + 0x40b00, 0xe0e0e0);
+ outpdw(MDP_BASE + 0x40b04, 0xe1e1e1);
+ outpdw(MDP_BASE + 0x40b08, 0xe1e1e1);
+ outpdw(MDP_BASE + 0x40b0c, 0xe2e2e2);
+ outpdw(MDP_BASE + 0x40b10, 0xe3e3e3);
+ outpdw(MDP_BASE + 0x40b14, 0xe3e3e3);
+ outpdw(MDP_BASE + 0x40b18, 0xe4e4e4);
+ outpdw(MDP_BASE + 0x40b1c, 0xe4e4e4);
+ outpdw(MDP_BASE + 0x40b20, 0xe5e5e5);
+ outpdw(MDP_BASE + 0x40b24, 0xe5e5e5);
+ outpdw(MDP_BASE + 0x40b28, 0xe6e6e6);
+ outpdw(MDP_BASE + 0x40b2c, 0xe6e6e6);
+ outpdw(MDP_BASE + 0x40b30, 0xe7e7e7);
+ outpdw(MDP_BASE + 0x40b34, 0xe7e7e7);
+ outpdw(MDP_BASE + 0x40b38, 0xe8e8e8);
+ outpdw(MDP_BASE + 0x40b3c, 0xe8e8e8);
+ outpdw(MDP_BASE + 0x40b40, 0xe9e9e9);
+ outpdw(MDP_BASE + 0x40b44, 0xe9e9e9);
+ outpdw(MDP_BASE + 0x40b48, 0xeaeaea);
+ outpdw(MDP_BASE + 0x40b4c, 0xeaeaea);
+ outpdw(MDP_BASE + 0x40b50, 0xebebeb);
+ outpdw(MDP_BASE + 0x40b54, 0xebebeb);
+ outpdw(MDP_BASE + 0x40b58, 0xececec);
+ outpdw(MDP_BASE + 0x40b5c, 0xececec);
+ outpdw(MDP_BASE + 0x40b60, 0xededed);
+ outpdw(MDP_BASE + 0x40b64, 0xededed);
+ outpdw(MDP_BASE + 0x40b68, 0xeeeeee);
+ outpdw(MDP_BASE + 0x40b6c, 0xeeeeee);
+ outpdw(MDP_BASE + 0x40b70, 0xefefef);
+ outpdw(MDP_BASE + 0x40b74, 0xefefef);
+ outpdw(MDP_BASE + 0x40b78, 0xf0f0f0);
+ outpdw(MDP_BASE + 0x40b7c, 0xf0f0f0);
+ outpdw(MDP_BASE + 0x40b80, 0xf1f1f1);
+ outpdw(MDP_BASE + 0x40b84, 0xf1f1f1);
+ outpdw(MDP_BASE + 0x40b88, 0xf2f2f2);
+ outpdw(MDP_BASE + 0x40b8c, 0xf2f2f2);
+ outpdw(MDP_BASE + 0x40b90, 0xf2f2f2);
+ outpdw(MDP_BASE + 0x40b94, 0xf3f3f3);
+ outpdw(MDP_BASE + 0x40b98, 0xf3f3f3);
+ outpdw(MDP_BASE + 0x40b9c, 0xf4f4f4);
+ outpdw(MDP_BASE + 0x40ba0, 0xf4f4f4);
+ outpdw(MDP_BASE + 0x40ba4, 0xf5f5f5);
+ outpdw(MDP_BASE + 0x40ba8, 0xf5f5f5);
+ outpdw(MDP_BASE + 0x40bac, 0xf6f6f6);
+ outpdw(MDP_BASE + 0x40bb0, 0xf6f6f6);
+ outpdw(MDP_BASE + 0x40bb4, 0xf7f7f7);
+ outpdw(MDP_BASE + 0x40bb8, 0xf7f7f7);
+ outpdw(MDP_BASE + 0x40bbc, 0xf8f8f8);
+ outpdw(MDP_BASE + 0x40bc0, 0xf8f8f8);
+ outpdw(MDP_BASE + 0x40bc4, 0xf9f9f9);
+ outpdw(MDP_BASE + 0x40bc8, 0xf9f9f9);
+ outpdw(MDP_BASE + 0x40bcc, 0xfafafa);
+ outpdw(MDP_BASE + 0x40bd0, 0xfafafa);
+ outpdw(MDP_BASE + 0x40bd4, 0xfafafa);
+ outpdw(MDP_BASE + 0x40bd8, 0xfbfbfb);
+ outpdw(MDP_BASE + 0x40bdc, 0xfbfbfb);
+ outpdw(MDP_BASE + 0x40be0, 0xfcfcfc);
+ outpdw(MDP_BASE + 0x40be4, 0xfcfcfc);
+ outpdw(MDP_BASE + 0x40be8, 0xfdfdfd);
+ outpdw(MDP_BASE + 0x40bec, 0xfdfdfd);
+ outpdw(MDP_BASE + 0x40bf0, 0xfefefe);
+ outpdw(MDP_BASE + 0x40bf4, 0xfefefe);
+ outpdw(MDP_BASE + 0x40bf8, 0xffffff);
+ outpdw(MDP_BASE + 0x40bfc, 0xffffff);
+ outpdw(MDP_BASE + 0x40c00, 0x0);
+ outpdw(MDP_BASE + 0x40c04, 0x0);
+ outpdw(MDP_BASE + 0x40c08, 0x0);
+ outpdw(MDP_BASE + 0x40c0c, 0x0);
+ outpdw(MDP_BASE + 0x40c10, 0x0);
+ outpdw(MDP_BASE + 0x40c14, 0x0);
+ outpdw(MDP_BASE + 0x40c18, 0x0);
+ outpdw(MDP_BASE + 0x40c1c, 0x0);
+ outpdw(MDP_BASE + 0x40c20, 0x0);
+ outpdw(MDP_BASE + 0x40c24, 0x0);
+ outpdw(MDP_BASE + 0x40c28, 0x0);
+ outpdw(MDP_BASE + 0x40c2c, 0x0);
+ outpdw(MDP_BASE + 0x40c30, 0x0);
+ outpdw(MDP_BASE + 0x40c34, 0x0);
+ outpdw(MDP_BASE + 0x40c38, 0x0);
+ outpdw(MDP_BASE + 0x40c3c, 0x0);
+ outpdw(MDP_BASE + 0x40c40, 0x10101);
+ outpdw(MDP_BASE + 0x40c44, 0x10101);
+ outpdw(MDP_BASE + 0x40c48, 0x10101);
+ outpdw(MDP_BASE + 0x40c4c, 0x10101);
+ outpdw(MDP_BASE + 0x40c50, 0x10101);
+ outpdw(MDP_BASE + 0x40c54, 0x10101);
+ outpdw(MDP_BASE + 0x40c58, 0x10101);
+ outpdw(MDP_BASE + 0x40c5c, 0x10101);
+ outpdw(MDP_BASE + 0x40c60, 0x10101);
+ outpdw(MDP_BASE + 0x40c64, 0x10101);
+ outpdw(MDP_BASE + 0x40c68, 0x20202);
+ outpdw(MDP_BASE + 0x40c6c, 0x20202);
+ outpdw(MDP_BASE + 0x40c70, 0x20202);
+ outpdw(MDP_BASE + 0x40c74, 0x20202);
+ outpdw(MDP_BASE + 0x40c78, 0x20202);
+ outpdw(MDP_BASE + 0x40c7c, 0x20202);
+ outpdw(MDP_BASE + 0x40c80, 0x30303);
+ outpdw(MDP_BASE + 0x40c84, 0x30303);
+ outpdw(MDP_BASE + 0x40c88, 0x30303);
+ outpdw(MDP_BASE + 0x40c8c, 0x30303);
+ outpdw(MDP_BASE + 0x40c90, 0x30303);
+ outpdw(MDP_BASE + 0x40c94, 0x40404);
+ outpdw(MDP_BASE + 0x40c98, 0x40404);
+ outpdw(MDP_BASE + 0x40c9c, 0x40404);
+ outpdw(MDP_BASE + 0x40ca0, 0x40404);
+ outpdw(MDP_BASE + 0x40ca4, 0x40404);
+ outpdw(MDP_BASE + 0x40ca8, 0x50505);
+ outpdw(MDP_BASE + 0x40cac, 0x50505);
+ outpdw(MDP_BASE + 0x40cb0, 0x50505);
+ outpdw(MDP_BASE + 0x40cb4, 0x50505);
+ outpdw(MDP_BASE + 0x40cb8, 0x60606);
+ outpdw(MDP_BASE + 0x40cbc, 0x60606);
+ outpdw(MDP_BASE + 0x40cc0, 0x60606);
+ outpdw(MDP_BASE + 0x40cc4, 0x70707);
+ outpdw(MDP_BASE + 0x40cc8, 0x70707);
+ outpdw(MDP_BASE + 0x40ccc, 0x70707);
+ outpdw(MDP_BASE + 0x40cd0, 0x70707);
+ outpdw(MDP_BASE + 0x40cd4, 0x80808);
+ outpdw(MDP_BASE + 0x40cd8, 0x80808);
+ outpdw(MDP_BASE + 0x40cdc, 0x80808);
+ outpdw(MDP_BASE + 0x40ce0, 0x90909);
+ outpdw(MDP_BASE + 0x40ce4, 0x90909);
+ outpdw(MDP_BASE + 0x40ce8, 0xa0a0a);
+ outpdw(MDP_BASE + 0x40cec, 0xa0a0a);
+ outpdw(MDP_BASE + 0x40cf0, 0xa0a0a);
+ outpdw(MDP_BASE + 0x40cf4, 0xb0b0b);
+ outpdw(MDP_BASE + 0x40cf8, 0xb0b0b);
+ outpdw(MDP_BASE + 0x40cfc, 0xb0b0b);
+ outpdw(MDP_BASE + 0x40d00, 0xc0c0c);
+ outpdw(MDP_BASE + 0x40d04, 0xc0c0c);
+ outpdw(MDP_BASE + 0x40d08, 0xd0d0d);
+ outpdw(MDP_BASE + 0x40d0c, 0xd0d0d);
+ outpdw(MDP_BASE + 0x40d10, 0xe0e0e);
+ outpdw(MDP_BASE + 0x40d14, 0xe0e0e);
+ outpdw(MDP_BASE + 0x40d18, 0xe0e0e);
+ outpdw(MDP_BASE + 0x40d1c, 0xf0f0f);
+ outpdw(MDP_BASE + 0x40d20, 0xf0f0f);
+ outpdw(MDP_BASE + 0x40d24, 0x101010);
+ outpdw(MDP_BASE + 0x40d28, 0x101010);
+ outpdw(MDP_BASE + 0x40d2c, 0x111111);
+ outpdw(MDP_BASE + 0x40d30, 0x111111);
+ outpdw(MDP_BASE + 0x40d34, 0x121212);
+ outpdw(MDP_BASE + 0x40d38, 0x121212);
+ outpdw(MDP_BASE + 0x40d3c, 0x131313);
+ outpdw(MDP_BASE + 0x40d40, 0x131313);
+ outpdw(MDP_BASE + 0x40d44, 0x141414);
+ outpdw(MDP_BASE + 0x40d48, 0x151515);
+ outpdw(MDP_BASE + 0x40d4c, 0x151515);
+ outpdw(MDP_BASE + 0x40d50, 0x161616);
+ outpdw(MDP_BASE + 0x40d54, 0x161616);
+ outpdw(MDP_BASE + 0x40d58, 0x171717);
+ outpdw(MDP_BASE + 0x40d5c, 0x171717);
+ outpdw(MDP_BASE + 0x40d60, 0x181818);
+ outpdw(MDP_BASE + 0x40d64, 0x191919);
+ outpdw(MDP_BASE + 0x40d68, 0x191919);
+ outpdw(MDP_BASE + 0x40d6c, 0x1a1a1a);
+ outpdw(MDP_BASE + 0x40d70, 0x1b1b1b);
+ outpdw(MDP_BASE + 0x40d74, 0x1b1b1b);
+ outpdw(MDP_BASE + 0x40d78, 0x1c1c1c);
+ outpdw(MDP_BASE + 0x40d7c, 0x1c1c1c);
+ outpdw(MDP_BASE + 0x40d80, 0x1d1d1d);
+ outpdw(MDP_BASE + 0x40d84, 0x1e1e1e);
+ outpdw(MDP_BASE + 0x40d88, 0x1f1f1f);
+ outpdw(MDP_BASE + 0x40d8c, 0x1f1f1f);
+ outpdw(MDP_BASE + 0x40d90, 0x202020);
+ outpdw(MDP_BASE + 0x40d94, 0x212121);
+ outpdw(MDP_BASE + 0x40d98, 0x212121);
+ outpdw(MDP_BASE + 0x40d9c, 0x222222);
+ outpdw(MDP_BASE + 0x40da0, 0x232323);
+ outpdw(MDP_BASE + 0x40da4, 0x242424);
+ outpdw(MDP_BASE + 0x40da8, 0x242424);
+ outpdw(MDP_BASE + 0x40dac, 0x252525);
+ outpdw(MDP_BASE + 0x40db0, 0x262626);
+ outpdw(MDP_BASE + 0x40db4, 0x272727);
+ outpdw(MDP_BASE + 0x40db8, 0x272727);
+ outpdw(MDP_BASE + 0x40dbc, 0x282828);
+ outpdw(MDP_BASE + 0x40dc0, 0x292929);
+ outpdw(MDP_BASE + 0x40dc4, 0x2a2a2a);
+ outpdw(MDP_BASE + 0x40dc8, 0x2b2b2b);
+ outpdw(MDP_BASE + 0x40dcc, 0x2c2c2c);
+ outpdw(MDP_BASE + 0x40dd0, 0x2c2c2c);
+ outpdw(MDP_BASE + 0x40dd4, 0x2d2d2d);
+ outpdw(MDP_BASE + 0x40dd8, 0x2e2e2e);
+ outpdw(MDP_BASE + 0x40ddc, 0x2f2f2f);
+ outpdw(MDP_BASE + 0x40de0, 0x303030);
+ outpdw(MDP_BASE + 0x40de4, 0x313131);
+ outpdw(MDP_BASE + 0x40de8, 0x323232);
+ outpdw(MDP_BASE + 0x40dec, 0x333333);
+ outpdw(MDP_BASE + 0x40df0, 0x333333);
+ outpdw(MDP_BASE + 0x40df4, 0x343434);
+ outpdw(MDP_BASE + 0x40df8, 0x353535);
+ outpdw(MDP_BASE + 0x40dfc, 0x363636);
+ outpdw(MDP_BASE + 0x40e00, 0x373737);
+ outpdw(MDP_BASE + 0x40e04, 0x383838);
+ outpdw(MDP_BASE + 0x40e08, 0x393939);
+ outpdw(MDP_BASE + 0x40e0c, 0x3a3a3a);
+ outpdw(MDP_BASE + 0x40e10, 0x3b3b3b);
+ outpdw(MDP_BASE + 0x40e14, 0x3c3c3c);
+ outpdw(MDP_BASE + 0x40e18, 0x3d3d3d);
+ outpdw(MDP_BASE + 0x40e1c, 0x3e3e3e);
+ outpdw(MDP_BASE + 0x40e20, 0x3f3f3f);
+ outpdw(MDP_BASE + 0x40e24, 0x404040);
+ outpdw(MDP_BASE + 0x40e28, 0x414141);
+ outpdw(MDP_BASE + 0x40e2c, 0x424242);
+ outpdw(MDP_BASE + 0x40e30, 0x434343);
+ outpdw(MDP_BASE + 0x40e34, 0x444444);
+ outpdw(MDP_BASE + 0x40e38, 0x464646);
+ outpdw(MDP_BASE + 0x40e3c, 0x474747);
+ outpdw(MDP_BASE + 0x40e40, 0x484848);
+ outpdw(MDP_BASE + 0x40e44, 0x494949);
+ outpdw(MDP_BASE + 0x40e48, 0x4a4a4a);
+ outpdw(MDP_BASE + 0x40e4c, 0x4b4b4b);
+ outpdw(MDP_BASE + 0x40e50, 0x4c4c4c);
+ outpdw(MDP_BASE + 0x40e54, 0x4d4d4d);
+ outpdw(MDP_BASE + 0x40e58, 0x4f4f4f);
+ outpdw(MDP_BASE + 0x40e5c, 0x505050);
+ outpdw(MDP_BASE + 0x40e60, 0x515151);
+ outpdw(MDP_BASE + 0x40e64, 0x525252);
+ outpdw(MDP_BASE + 0x40e68, 0x535353);
+ outpdw(MDP_BASE + 0x40e6c, 0x545454);
+ outpdw(MDP_BASE + 0x40e70, 0x565656);
+ outpdw(MDP_BASE + 0x40e74, 0x575757);
+ outpdw(MDP_BASE + 0x40e78, 0x585858);
+ outpdw(MDP_BASE + 0x40e7c, 0x595959);
+ outpdw(MDP_BASE + 0x40e80, 0x5b5b5b);
+ outpdw(MDP_BASE + 0x40e84, 0x5c5c5c);
+ outpdw(MDP_BASE + 0x40e88, 0x5d5d5d);
+ outpdw(MDP_BASE + 0x40e8c, 0x5e5e5e);
+ outpdw(MDP_BASE + 0x40e90, 0x606060);
+ outpdw(MDP_BASE + 0x40e94, 0x616161);
+ outpdw(MDP_BASE + 0x40e98, 0x626262);
+ outpdw(MDP_BASE + 0x40e9c, 0x646464);
+ outpdw(MDP_BASE + 0x40ea0, 0x656565);
+ outpdw(MDP_BASE + 0x40ea4, 0x666666);
+ outpdw(MDP_BASE + 0x40ea8, 0x686868);
+ outpdw(MDP_BASE + 0x40eac, 0x696969);
+ outpdw(MDP_BASE + 0x40eb0, 0x6a6a6a);
+ outpdw(MDP_BASE + 0x40eb4, 0x6c6c6c);
+ outpdw(MDP_BASE + 0x40eb8, 0x6d6d6d);
+ outpdw(MDP_BASE + 0x40ebc, 0x6f6f6f);
+ outpdw(MDP_BASE + 0x40ec0, 0x707070);
+ outpdw(MDP_BASE + 0x40ec4, 0x717171);
+ outpdw(MDP_BASE + 0x40ec8, 0x737373);
+ outpdw(MDP_BASE + 0x40ecc, 0x747474);
+ outpdw(MDP_BASE + 0x40ed0, 0x767676);
+ outpdw(MDP_BASE + 0x40ed4, 0x777777);
+ outpdw(MDP_BASE + 0x40ed8, 0x797979);
+ outpdw(MDP_BASE + 0x40edc, 0x7a7a7a);
+ outpdw(MDP_BASE + 0x40ee0, 0x7c7c7c);
+ outpdw(MDP_BASE + 0x40ee4, 0x7d7d7d);
+ outpdw(MDP_BASE + 0x40ee8, 0x7f7f7f);
+ outpdw(MDP_BASE + 0x40eec, 0x808080);
+ outpdw(MDP_BASE + 0x40ef0, 0x828282);
+ outpdw(MDP_BASE + 0x40ef4, 0x838383);
+ outpdw(MDP_BASE + 0x40ef8, 0x858585);
+ outpdw(MDP_BASE + 0x40efc, 0x868686);
+ outpdw(MDP_BASE + 0x40f00, 0x888888);
+ outpdw(MDP_BASE + 0x40f04, 0x898989);
+ outpdw(MDP_BASE + 0x40f08, 0x8b8b8b);
+ outpdw(MDP_BASE + 0x40f0c, 0x8d8d8d);
+ outpdw(MDP_BASE + 0x40f10, 0x8e8e8e);
+ outpdw(MDP_BASE + 0x40f14, 0x909090);
+ outpdw(MDP_BASE + 0x40f18, 0x919191);
+ outpdw(MDP_BASE + 0x40f1c, 0x939393);
+ outpdw(MDP_BASE + 0x40f20, 0x959595);
+ outpdw(MDP_BASE + 0x40f24, 0x969696);
+ outpdw(MDP_BASE + 0x40f28, 0x989898);
+ outpdw(MDP_BASE + 0x40f2c, 0x9a9a9a);
+ outpdw(MDP_BASE + 0x40f30, 0x9b9b9b);
+ outpdw(MDP_BASE + 0x40f34, 0x9d9d9d);
+ outpdw(MDP_BASE + 0x40f38, 0x9f9f9f);
+ outpdw(MDP_BASE + 0x40f3c, 0xa1a1a1);
+ outpdw(MDP_BASE + 0x40f40, 0xa2a2a2);
+ outpdw(MDP_BASE + 0x40f44, 0xa4a4a4);
+ outpdw(MDP_BASE + 0x40f48, 0xa6a6a6);
+ outpdw(MDP_BASE + 0x40f4c, 0xa7a7a7);
+ outpdw(MDP_BASE + 0x40f50, 0xa9a9a9);
+ outpdw(MDP_BASE + 0x40f54, 0xababab);
+ outpdw(MDP_BASE + 0x40f58, 0xadadad);
+ outpdw(MDP_BASE + 0x40f5c, 0xafafaf);
+ outpdw(MDP_BASE + 0x40f60, 0xb0b0b0);
+ outpdw(MDP_BASE + 0x40f64, 0xb2b2b2);
+ outpdw(MDP_BASE + 0x40f68, 0xb4b4b4);
+ outpdw(MDP_BASE + 0x40f6c, 0xb6b6b6);
+ outpdw(MDP_BASE + 0x40f70, 0xb8b8b8);
+ outpdw(MDP_BASE + 0x40f74, 0xbababa);
+ outpdw(MDP_BASE + 0x40f78, 0xbbbbbb);
+ outpdw(MDP_BASE + 0x40f7c, 0xbdbdbd);
+ outpdw(MDP_BASE + 0x40f80, 0xbfbfbf);
+ outpdw(MDP_BASE + 0x40f84, 0xc1c1c1);
+ outpdw(MDP_BASE + 0x40f88, 0xc3c3c3);
+ outpdw(MDP_BASE + 0x40f8c, 0xc5c5c5);
+ outpdw(MDP_BASE + 0x40f90, 0xc7c7c7);
+ outpdw(MDP_BASE + 0x40f94, 0xc9c9c9);
+ outpdw(MDP_BASE + 0x40f98, 0xcbcbcb);
+ outpdw(MDP_BASE + 0x40f9c, 0xcdcdcd);
+ outpdw(MDP_BASE + 0x40fa0, 0xcfcfcf);
+ outpdw(MDP_BASE + 0x40fa4, 0xd1d1d1);
+ outpdw(MDP_BASE + 0x40fa8, 0xd3d3d3);
+ outpdw(MDP_BASE + 0x40fac, 0xd5d5d5);
+ outpdw(MDP_BASE + 0x40fb0, 0xd7d7d7);
+ outpdw(MDP_BASE + 0x40fb4, 0xd9d9d9);
+ outpdw(MDP_BASE + 0x40fb8, 0xdbdbdb);
+ outpdw(MDP_BASE + 0x40fbc, 0xdddddd);
+ outpdw(MDP_BASE + 0x40fc0, 0xdfdfdf);
+ outpdw(MDP_BASE + 0x40fc4, 0xe1e1e1);
+ outpdw(MDP_BASE + 0x40fc8, 0xe3e3e3);
+ outpdw(MDP_BASE + 0x40fcc, 0xe5e5e5);
+ outpdw(MDP_BASE + 0x40fd0, 0xe7e7e7);
+ outpdw(MDP_BASE + 0x40fd4, 0xe9e9e9);
+ outpdw(MDP_BASE + 0x40fd8, 0xebebeb);
+ outpdw(MDP_BASE + 0x40fdc, 0xeeeeee);
+ outpdw(MDP_BASE + 0x40fe0, 0xf0f0f0);
+ outpdw(MDP_BASE + 0x40fe4, 0xf2f2f2);
+ outpdw(MDP_BASE + 0x40fe8, 0xf4f4f4);
+ outpdw(MDP_BASE + 0x40fec, 0xf6f6f6);
+ outpdw(MDP_BASE + 0x40ff0, 0xf8f8f8);
+ outpdw(MDP_BASE + 0x40ff4, 0xfbfbfb);
+ outpdw(MDP_BASE + 0x40ff8, 0xfdfdfd);
+ outpdw(MDP_BASE + 0x40ffc, 0xffffff);
+}
+
+#define IRQ_EN_1__MDP_IRQ___M 0x00000800
+
+void mdp_hw_init(void)
+{
+ int i;
+
+ /* MDP cmd block enable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+ /* debug interface write access */
+ outpdw(MDP_BASE + 0x60, 1);
+
+ outp32(MDP_INTR_ENABLE, MDP_ANY_INTR_MASK);
+ outp32(MDP_EBI2_PORTMAP_MODE, 0x3);
+ outpdw(MDP_CMD_DEBUG_ACCESS_BASE + 0x01f8, 0x0);
+ outpdw(MDP_CMD_DEBUG_ACCESS_BASE + 0x01fc, 0x0);
+ outpdw(MDP_BASE + 0x60, 0x1);
+ mdp_load_lut_param();
+
+ /*
+ * clear up unused fg/main registers
+ */
+ /* comp.plane 2&3 ystride */
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0120, 0x0);
+ /* unpacked pattern */
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x012c, 0x0);
+ /* unpacked pattern */
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0130, 0x0);
+ /* unpacked pattern */
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0134, 0x0);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0158, 0x0);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x15c, 0x0);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0160, 0x0);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0170, 0x0);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0174, 0x0);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x017c, 0x0);
+
+ /* comp.plane 2 */
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0114, 0x0);
+ /* comp.plane 3 */
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0118, 0x0);
+
+ /* clear up unused bg registers */
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01c8, 0);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01d0, 0);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01dc, 0);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01e0, 0);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01e4, 0);
+
+#ifndef CONFIG_FB_MSM_MDP22
+ MDP_OUTP(MDP_BASE + 0xE0000, 0);
+ MDP_OUTP(MDP_BASE + 0x100, 0xffffffff);
+ MDP_OUTP(MDP_BASE + 0x90070, 0);
+ MDP_OUTP(MDP_BASE + 0x94010, 1);
+ MDP_OUTP(MDP_BASE + 0x9401c, 2);
+#endif
+
+ /*
+ * limit vector
+ * pre gets applied before color matrix conversion
+ * post is after ccs
+ */
+ writel(mdp_plv[0], MDP_CSC_PRE_LV1n(0));
+ writel(mdp_plv[1], MDP_CSC_PRE_LV1n(1));
+ writel(mdp_plv[2], MDP_CSC_PRE_LV1n(2));
+ writel(mdp_plv[3], MDP_CSC_PRE_LV1n(3));
+
+#ifdef CONFIG_FB_MSM_MDP31
+ writel(mdp_plv[2], MDP_CSC_PRE_LV1n(4));
+ writel(mdp_plv[3], MDP_CSC_PRE_LV1n(5));
+
+ writel(0, MDP_CSC_POST_LV1n(0));
+ writel(0xff, MDP_CSC_POST_LV1n(1));
+ writel(0, MDP_CSC_POST_LV1n(2));
+ writel(0xff, MDP_CSC_POST_LV1n(3));
+ writel(0, MDP_CSC_POST_LV1n(4));
+ writel(0xff, MDP_CSC_POST_LV1n(5));
+
+ writel(0, MDP_CSC_PRE_LV2n(0));
+ writel(0xff, MDP_CSC_PRE_LV2n(1));
+ writel(0, MDP_CSC_PRE_LV2n(2));
+ writel(0xff, MDP_CSC_PRE_LV2n(3));
+ writel(0, MDP_CSC_PRE_LV2n(4));
+ writel(0xff, MDP_CSC_PRE_LV2n(5));
+
+ writel(mdp_plv[0], MDP_CSC_POST_LV2n(0));
+ writel(mdp_plv[1], MDP_CSC_POST_LV2n(1));
+ writel(mdp_plv[2], MDP_CSC_POST_LV2n(2));
+ writel(mdp_plv[3], MDP_CSC_POST_LV2n(3));
+ writel(mdp_plv[2], MDP_CSC_POST_LV2n(4));
+ writel(mdp_plv[3], MDP_CSC_POST_LV2n(5));
+#endif
+
+ /* primary forward matrix */
+ for (i = 0; i < MDP_CCS_SIZE; i++)
+ writel(mdp_ccs_rgb2yuv.ccs[i], MDP_CSC_PFMVn(i));
+
+#ifdef CONFIG_FB_MSM_MDP31
+ for (i = 0; i < MDP_BV_SIZE; i++)
+ writel(mdp_ccs_rgb2yuv.bv[i], MDP_CSC_POST_BV2n(i));
+
+ writel(0, MDP_CSC_PRE_BV2n(0));
+ writel(0, MDP_CSC_PRE_BV2n(1));
+ writel(0, MDP_CSC_PRE_BV2n(2));
+#endif
+ /* primary reverse matrix */
+ for (i = 0; i < MDP_CCS_SIZE; i++)
+ writel(mdp_ccs_yuv2rgb.ccs[i], MDP_CSC_PRMVn(i));
+
+ for (i = 0; i < MDP_BV_SIZE; i++)
+ writel(mdp_ccs_yuv2rgb.bv[i], MDP_CSC_PRE_BV1n(i));
+
+#ifdef CONFIG_FB_MSM_MDP31
+ writel(0, MDP_CSC_POST_BV1n(0));
+ writel(0, MDP_CSC_POST_BV1n(1));
+ writel(0, MDP_CSC_POST_BV1n(2));
+
+ outpdw(MDP_BASE + 0x30010, 0x03e0);
+ outpdw(MDP_BASE + 0x30014, 0x0360);
+ outpdw(MDP_BASE + 0x30018, 0x0120);
+ outpdw(MDP_BASE + 0x3001c, 0x0140);
+#endif
+ mdp_init_scale_table();
+
+#ifndef CONFIG_FB_MSM_MDP31
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0104,
+ ((16 << 6) << 16) | (16) << 6);
+#endif
+
+ /* MDP cmd block disable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+}
\ No newline at end of file
diff --git a/drivers/staging/msm/mdp_ppp.c b/drivers/staging/msm/mdp_ppp.c
new file mode 100644
index 0000000..c35a6ae
--- /dev/null
+++ b/drivers/staging/msm/mdp_ppp.c
@@ -0,0 +1,1502 @@
+/* drivers/video/msm/src/drv/mdp/mdp_ppp.c
+ *
+ * Copyright (C) 2007 Google Incorporated
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <msm_mdp.h>
+#include <linux/file.h>
+#include <linux/major.h>
+
+#include "linux/proc_fs.h"
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+
+#define MDP_IS_IMGTYPE_BAD(x) (((x) >= MDP_IMGTYPE_LIMIT) && \
+ (((x) < MDP_IMGTYPE2_START) || \
+ ((x) >= MDP_IMGTYPE_LIMIT2)))
+
+static uint32_t bytes_per_pixel[] = {
+ [MDP_RGB_565] = 2,
+ [MDP_RGB_888] = 3,
+ [MDP_XRGB_8888] = 4,
+ [MDP_ARGB_8888] = 4,
+ [MDP_RGBA_8888] = 4,
+ [MDP_BGRA_8888] = 4,
+ [MDP_Y_CBCR_H2V1] = 1,
+ [MDP_Y_CBCR_H2V2] = 1,
+ [MDP_Y_CRCB_H2V1] = 1,
+ [MDP_Y_CRCB_H2V2] = 1,
+ [MDP_YCRYCB_H2V1] = 2,
+ [MDP_BGR_565] = 2
+};
+
+extern uint32 mdp_plv[];
+extern struct semaphore mdp_ppp_mutex;
+
+uint32_t mdp_get_bytes_per_pixel(uint32_t format)
+{
+ uint32_t bpp = 0;
+ if (format < ARRAY_SIZE(bytes_per_pixel))
+ bpp = bytes_per_pixel[format];
+
+ BUG_ON(!bpp);
+ return bpp;
+}
+
+static uint32 mdp_conv_matx_rgb2yuv(uint32 input_pixel,
+ uint16 *matrix_and_bias_vector,
+ uint32 *clamp_vector,
+ uint32 *look_up_table)
+{
+ uint8 input_C2, input_C0, input_C1;
+ uint32 output;
+ int32 comp_C2, comp_C1, comp_C0, temp;
+ int32 temp1, temp2, temp3;
+ int32 matrix[9];
+ int32 bias_vector[3];
+ int32 Y_low_limit, Y_high_limit, C_low_limit, C_high_limit;
+ int32 i;
+ uint32 _is_lookup_table_enabled;
+
+ input_C2 = (input_pixel >> 16) & 0xFF;
+ input_C1 = (input_pixel >> 8) & 0xFF;
+ input_C0 = (input_pixel >> 0) & 0xFF;
+
+ comp_C0 = input_C0;
+ comp_C1 = input_C1;
+ comp_C2 = input_C2;
+
+ for (i = 0; i < 9; i++)
+ matrix[i] =
+ ((int32) (((int32) matrix_and_bias_vector[i]) << 20)) >> 20;
+
+ bias_vector[0] = (int32) (matrix_and_bias_vector[9] & 0xFF);
+ bias_vector[1] = (int32) (matrix_and_bias_vector[10] & 0xFF);
+ bias_vector[2] = (int32) (matrix_and_bias_vector[11] & 0xFF);
+
+ Y_low_limit = (int32) clamp_vector[0];
+ Y_high_limit = (int32) clamp_vector[1];
+ C_low_limit = (int32) clamp_vector[2];
+ C_high_limit = (int32) clamp_vector[3];
+
+ if (look_up_table == 0) /* check for NULL point */
+ _is_lookup_table_enabled = 0;
+ else
+ _is_lookup_table_enabled = 1;
+
+ if (_is_lookup_table_enabled == 1) {
+ comp_C2 = (look_up_table[comp_C2] >> 16) & 0xFF;
+ comp_C1 = (look_up_table[comp_C1] >> 8) & 0xFF;
+ comp_C0 = (look_up_table[comp_C0] >> 0) & 0xFF;
+ }
+ /*
+ * Color Conversion
+ * reorder input colors
+ */
+ temp = comp_C2;
+ comp_C2 = comp_C1;
+ comp_C1 = comp_C0;
+ comp_C0 = temp;
+
+ /* matrix multiplication */
+ temp1 = comp_C0 * matrix[0] + comp_C1 * matrix[1] + comp_C2 * matrix[2];
+ temp2 = comp_C0 * matrix[3] + comp_C1 * matrix[4] + comp_C2 * matrix[5];
+ temp3 = comp_C0 * matrix[6] + comp_C1 * matrix[7] + comp_C2 * matrix[8];
+
+ comp_C0 = temp1 + 0x100;
+ comp_C1 = temp2 + 0x100;
+ comp_C2 = temp3 + 0x100;
+
+ /* take interger part */
+ comp_C0 >>= 9;
+ comp_C1 >>= 9;
+ comp_C2 >>= 9;
+
+ /* post bias (+) */
+ comp_C0 += bias_vector[0];
+ comp_C1 += bias_vector[1];
+ comp_C2 += bias_vector[2];
+
+ /* limit pixel to 8-bit */
+ if (comp_C0 < 0)
+ comp_C0 = 0;
+
+ if (comp_C0 > 255)
+ comp_C0 = 255;
+
+ if (comp_C1 < 0)
+ comp_C1 = 0;
+
+ if (comp_C1 > 255)
+ comp_C1 = 255;
+
+ if (comp_C2 < 0)
+ comp_C2 = 0;
+
+ if (comp_C2 > 255)
+ comp_C2 = 255;
+
+ /* clamp */
+ if (comp_C0 < Y_low_limit)
+ comp_C0 = Y_low_limit;
+
+ if (comp_C0 > Y_high_limit)
+ comp_C0 = Y_high_limit;
+
+ if (comp_C1 < C_low_limit)
+ comp_C1 = C_low_limit;
+
+ if (comp_C1 > C_high_limit)
+ comp_C1 = C_high_limit;
+
+ if (comp_C2 < C_low_limit)
+ comp_C2 = C_low_limit;
+
+ if (comp_C2 > C_high_limit)
+ comp_C2 = C_high_limit;
+
+ output = (comp_C2 << 16) | (comp_C1 << 8) | comp_C0;
+ return output;
+}
+
+uint32 mdp_conv_matx_yuv2rgb(uint32 input_pixel,
+ uint16 *matrix_and_bias_vector,
+ uint32 *clamp_vector, uint32 *look_up_table)
+{
+ uint8 input_C2, input_C0, input_C1;
+ uint32 output;
+ int32 comp_C2, comp_C1, comp_C0, temp;
+ int32 temp1, temp2, temp3;
+ int32 matrix[9];
+ int32 bias_vector[3];
+ int32 Y_low_limit, Y_high_limit, C_low_limit, C_high_limit;
+ int32 i;
+ uint32 _is_lookup_table_enabled;
+
+ input_C2 = (input_pixel >> 16) & 0xFF;
+ input_C1 = (input_pixel >> 8) & 0xFF;
+ input_C0 = (input_pixel >> 0) & 0xFF;
+
+ comp_C0 = input_C0;
+ comp_C1 = input_C1;
+ comp_C2 = input_C2;
+
+ for (i = 0; i < 9; i++)
+ matrix[i] =
+ ((int32) (((int32) matrix_and_bias_vector[i]) << 20)) >> 20;
+
+ bias_vector[0] = (int32) (matrix_and_bias_vector[9] & 0xFF);
+ bias_vector[1] = (int32) (matrix_and_bias_vector[10] & 0xFF);
+ bias_vector[2] = (int32) (matrix_and_bias_vector[11] & 0xFF);
+
+ Y_low_limit = (int32) clamp_vector[0];
+ Y_high_limit = (int32) clamp_vector[1];
+ C_low_limit = (int32) clamp_vector[2];
+ C_high_limit = (int32) clamp_vector[3];
+
+ if (look_up_table == 0) /* check for NULL point */
+ _is_lookup_table_enabled = 0;
+ else
+ _is_lookup_table_enabled = 1;
+
+ /* clamp */
+ if (comp_C0 < Y_low_limit)
+ comp_C0 = Y_low_limit;
+
+ if (comp_C0 > Y_high_limit)
+ comp_C0 = Y_high_limit;
+
+ if (comp_C1 < C_low_limit)
+ comp_C1 = C_low_limit;
+
+ if (comp_C1 > C_high_limit)
+ comp_C1 = C_high_limit;
+
+ if (comp_C2 < C_low_limit)
+ comp_C2 = C_low_limit;
+
+ if (comp_C2 > C_high_limit)
+ comp_C2 = C_high_limit;
+
+ /*
+ * Color Conversion
+ * pre bias (-)
+ */
+ comp_C0 -= bias_vector[0];
+ comp_C1 -= bias_vector[1];
+ comp_C2 -= bias_vector[2];
+
+ /* matrix multiplication */
+ temp1 = comp_C0 * matrix[0] + comp_C1 * matrix[1] + comp_C2 * matrix[2];
+ temp2 = comp_C0 * matrix[3] + comp_C1 * matrix[4] + comp_C2 * matrix[5];
+ temp3 = comp_C0 * matrix[6] + comp_C1 * matrix[7] + comp_C2 * matrix[8];
+
+ comp_C0 = temp1 + 0x100;
+ comp_C1 = temp2 + 0x100;
+ comp_C2 = temp3 + 0x100;
+
+ /* take interger part */
+ comp_C0 >>= 9;
+ comp_C1 >>= 9;
+ comp_C2 >>= 9;
+
+ /* reorder output colors */
+ temp = comp_C0;
+ comp_C0 = comp_C1;
+ comp_C1 = comp_C2;
+ comp_C2 = temp;
+
+ /* limit pixel to 8-bit */
+ if (comp_C0 < 0)
+ comp_C0 = 0;
+
+ if (comp_C0 > 255)
+ comp_C0 = 255;
+
+ if (comp_C1 < 0)
+ comp_C1 = 0;
+
+ if (comp_C1 > 255)
+ comp_C1 = 255;
+
+ if (comp_C2 < 0)
+ comp_C2 = 0;
+
+ if (comp_C2 > 255)
+ comp_C2 = 255;
+
+ /* Look-up table */
+ if (_is_lookup_table_enabled == 1) {
+ comp_C2 = (look_up_table[comp_C2] >> 16) & 0xFF;
+ comp_C1 = (look_up_table[comp_C1] >> 8) & 0xFF;
+ comp_C0 = (look_up_table[comp_C0] >> 0) & 0xFF;
+ }
+
+ output = (comp_C2 << 16) | (comp_C1 << 8) | comp_C0;
+ return output;
+}
+
+static uint32 mdp_calc_tpval(MDPIMG *mdpImg)
+{
+ uint32 tpVal;
+ uint8 plane_tp;
+
+ tpVal = 0;
+ if ((mdpImg->imgType == MDP_RGB_565)
+ || (mdpImg->imgType == MDP_BGR_565)) {
+ /*
+ * transparent color conversion into 24 bpp
+ *
+ * C2R_8BIT
+ * left shift the entire bit and or it with the upper most bits
+ */
+ plane_tp = (uint8) ((mdpImg->tpVal & 0xF800) >> 11);
+ tpVal |= ((plane_tp << 3) | ((plane_tp & 0x1C) >> 2)) << 16;
+
+ /* C1B_8BIT */
+ plane_tp = (uint8) (mdpImg->tpVal & 0x1F);
+ tpVal |= ((plane_tp << 3) | ((plane_tp & 0x1C) >> 2)) << 8;
+
+ /* C0G_8BIT */
+ plane_tp = (uint8) ((mdpImg->tpVal & 0x7E0) >> 5);
+ tpVal |= ((plane_tp << 2) | ((plane_tp & 0x30) >> 4));
+ } else {
+ /* 24bit RGB to RBG conversion */
+
+ tpVal = (mdpImg->tpVal & 0xFF00) >> 8;
+ tpVal |= (mdpImg->tpVal & 0xFF) << 8;
+ tpVal |= (mdpImg->tpVal & 0xFF0000);
+ }
+
+ return tpVal;
+}
+
+static uint8 *mdp_get_chroma_addr(MDPIBUF *iBuf)
+{
+ uint8 *dest1;
+
+ dest1 = NULL;
+ switch (iBuf->ibuf_type) {
+ case MDP_Y_CBCR_H2V2:
+ case MDP_Y_CRCB_H2V2:
+ case MDP_Y_CBCR_H2V1:
+ case MDP_Y_CRCB_H2V1:
+ dest1 = (uint8 *) iBuf->buf;
+ dest1 += iBuf->ibuf_width * iBuf->ibuf_height * iBuf->bpp;
+ break;
+
+ default:
+ break;
+ }
+
+ return dest1;
+}
+
+static void mdp_ppp_setbg(MDPIBUF *iBuf)
+{
+ uint8 *bg0_addr;
+ uint8 *bg1_addr;
+ uint32 bg0_ystride, bg1_ystride;
+ uint32 ppp_src_cfg_reg, unpack_pattern;
+ int v_slice, h_slice;
+
+ v_slice = h_slice = 1;
+ bg0_addr = (uint8 *) iBuf->buf;
+ bg1_addr = mdp_get_chroma_addr(iBuf);
+
+ bg0_ystride = iBuf->ibuf_width * iBuf->bpp;
+ bg1_ystride = iBuf->ibuf_width * iBuf->bpp;
+
+ switch (iBuf->ibuf_type) {
+ case MDP_BGR_565:
+ case MDP_RGB_565:
+ /* 888 = 3bytes
+ * RGB = 3Components
+ * RGB interleaved
+ */
+ ppp_src_cfg_reg = PPP_SRC_C2R_5BITS | PPP_SRC_C0G_6BITS |
+ PPP_SRC_C1B_5BITS | PPP_SRC_BPP_INTERLVD_2BYTES |
+ PPP_SRC_INTERLVD_3COMPONENTS | PPP_SRC_UNPACK_TIGHT |
+ PPP_SRC_UNPACK_ALIGN_LSB |
+ PPP_SRC_FETCH_PLANES_INTERLVD;
+
+ if (iBuf->ibuf_type == MDP_RGB_565)
+ unpack_pattern =
+ MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 8);
+ else
+ unpack_pattern =
+ MDP_GET_PACK_PATTERN(0, CLR_B, CLR_G, CLR_R, 8);
+ break;
+
+ case MDP_RGB_888:
+ /*
+ * 888 = 3bytes
+ * RGB = 3Components
+ * RGB interleaved
+ */
+ ppp_src_cfg_reg = PPP_SRC_C2R_8BITS | PPP_SRC_C0G_8BITS |
+ PPP_SRC_C1B_8BITS | PPP_SRC_BPP_INTERLVD_3BYTES |
+ PPP_SRC_INTERLVD_3COMPONENTS | PPP_SRC_UNPACK_TIGHT |
+ PPP_SRC_UNPACK_ALIGN_LSB | PPP_SRC_FETCH_PLANES_INTERLVD;
+
+ unpack_pattern =
+ MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 8);
+ break;
+
+ case MDP_BGRA_8888:
+ case MDP_RGBA_8888:
+ case MDP_ARGB_8888:
+ case MDP_XRGB_8888:
+ /*
+ * 8888 = 4bytes
+ * ARGB = 4Components
+ * ARGB interleaved
+ */
+ ppp_src_cfg_reg = PPP_SRC_C2R_8BITS | PPP_SRC_C0G_8BITS |
+ PPP_SRC_C1B_8BITS | PPP_SRC_C3A_8BITS | PPP_SRC_C3_ALPHA_EN |
+ PPP_SRC_BPP_INTERLVD_4BYTES | PPP_SRC_INTERLVD_4COMPONENTS |
+ PPP_SRC_UNPACK_TIGHT | PPP_SRC_UNPACK_ALIGN_LSB |
+ PPP_SRC_FETCH_PLANES_INTERLVD;
+
+ if (iBuf->ibuf_type == MDP_BGRA_8888)
+ unpack_pattern =
+ MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_R, CLR_G, CLR_B,
+ 8);
+ else if (iBuf->ibuf_type == MDP_RGBA_8888)
+ unpack_pattern =
+ MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_B, CLR_G, CLR_R,
+ 8);
+ else
+ unpack_pattern =
+ MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_R, CLR_G, CLR_B,
+ 8);
+ break;
+
+ case MDP_Y_CBCR_H2V2:
+ case MDP_Y_CRCB_H2V2:
+ ppp_src_cfg_reg = PPP_SRC_C2R_8BITS |
+ PPP_SRC_C0G_8BITS |
+ PPP_SRC_C1B_8BITS |
+ PPP_SRC_C3A_8BITS |
+ PPP_SRC_BPP_INTERLVD_2BYTES |
+ PPP_SRC_INTERLVD_2COMPONENTS |
+ PPP_SRC_UNPACK_TIGHT |
+ PPP_SRC_UNPACK_ALIGN_LSB | PPP_SRC_FETCH_PLANES_PSEUDOPLNR;
+
+ if (iBuf->ibuf_type == MDP_Y_CBCR_H2V1)
+ unpack_pattern =
+ MDP_GET_PACK_PATTERN(0, 0, CLR_CB, CLR_CR, 8);
+ else
+ unpack_pattern =
+ MDP_GET_PACK_PATTERN(0, 0, CLR_CR, CLR_CB, 8);
+ v_slice = h_slice = 2;
+ break;
+
+ case MDP_YCRYCB_H2V1:
+ ppp_src_cfg_reg = PPP_SRC_C2R_8BITS |
+ PPP_SRC_C0G_8BITS |
+ PPP_SRC_C1B_8BITS |
+ PPP_SRC_C3A_8BITS |
+ PPP_SRC_BPP_INTERLVD_2BYTES |
+ PPP_SRC_INTERLVD_4COMPONENTS |
+ PPP_SRC_UNPACK_TIGHT | PPP_SRC_UNPACK_ALIGN_LSB;
+
+ unpack_pattern =
+ MDP_GET_PACK_PATTERN(CLR_Y, CLR_CR, CLR_Y, CLR_CB, 8);
+ h_slice = 2;
+ break;
+
+ case MDP_Y_CBCR_H2V1:
+ case MDP_Y_CRCB_H2V1:
+ ppp_src_cfg_reg = PPP_SRC_C2R_8BITS |
+ PPP_SRC_C0G_8BITS |
+ PPP_SRC_C1B_8BITS |
+ PPP_SRC_C3A_8BITS |
+ PPP_SRC_BPP_INTERLVD_2BYTES |
+ PPP_SRC_INTERLVD_2COMPONENTS |
+ PPP_SRC_UNPACK_TIGHT |
+ PPP_SRC_UNPACK_ALIGN_LSB | PPP_SRC_FETCH_PLANES_PSEUDOPLNR;
+
+ if (iBuf->ibuf_type == MDP_Y_CBCR_H2V1)
+ unpack_pattern =
+ MDP_GET_PACK_PATTERN(0, 0, CLR_CB, CLR_CR, 8);
+ else
+ unpack_pattern =
+ MDP_GET_PACK_PATTERN(0, 0, CLR_CR, CLR_CB, 8);
+ h_slice = 2;
+ break;
+
+ default:
+ return;
+ }
+
+ /* starting input address adjustment */
+ mdp_adjust_start_addr(&bg0_addr, &bg1_addr, v_slice, h_slice,
+ iBuf->roi.lcd_x, iBuf->roi.lcd_y,
+ iBuf->ibuf_width, iBuf->ibuf_height, iBuf->bpp,
+ iBuf, 1);
+
+ /*
+ * 0x01c0: background plane 0 addr
+ * 0x01c4: background plane 1 addr
+ * 0x01c8: background plane 2 addr
+ * 0x01cc: bg y stride for plane 0 and 1
+ * 0x01d0: bg y stride for plane 2
+ * 0x01d4: bg src PPP config
+ * 0x01d8: unpack pattern
+ */
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01c0, bg0_addr);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01c4, bg1_addr);
+
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01cc,
+ (bg1_ystride << 16) | bg0_ystride);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01d4, ppp_src_cfg_reg);
+
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01d8, unpack_pattern);
+}
+
+#define IS_PSEUDOPLNR(img) ((img == MDP_Y_CRCB_H2V2) | \
+ (img == MDP_Y_CBCR_H2V2) | \
+ (img == MDP_Y_CRCB_H2V1) | \
+ (img == MDP_Y_CBCR_H2V1))
+
+#define IMG_LEN(rect_h, w, rect_w, bpp) (((rect_h) * w) * bpp)
+
+#define Y_TO_CRCB_RATIO(format) \
+ ((format == MDP_Y_CBCR_H2V2 || format == MDP_Y_CRCB_H2V2) ? 2 :\
+ (format == MDP_Y_CBCR_H2V1 || format == MDP_Y_CRCB_H2V1) ? 1 : 1)
+
+static void get_len(struct mdp_img *img, struct mdp_rect *rect, uint32_t bpp,
+ uint32_t *len0, uint32_t *len1)
+{
+ *len0 = IMG_LEN(rect->h, img->width, rect->w, bpp);
+ if (IS_PSEUDOPLNR(img->format))
+ *len1 = *len0/Y_TO_CRCB_RATIO(img->format);
+ else
+ *len1 = 0;
+}
+
+static void flush_imgs(struct mdp_blit_req *req, int src_bpp, int dst_bpp,
+ struct file *p_src_file, struct file *p_dst_file)
+{
+#ifdef CONFIG_ANDROID_PMEM
+ uint32_t src0_len, src1_len, dst0_len, dst1_len;
+
+ /* flush src images to memory before dma to mdp */
+ get_len(&req->src, &req->src_rect, src_bpp,
+ &src0_len, &src1_len);
+
+ flush_pmem_file(p_src_file,
+ req->src.offset, src0_len);
+
+ if (IS_PSEUDOPLNR(req->src.format))
+ flush_pmem_file(p_src_file,
+ req->src.offset + src0_len, src1_len);
+
+ get_len(&req->dst, &req->dst_rect, dst_bpp, &dst0_len, &dst1_len);
+ flush_pmem_file(p_dst_file, req->dst.offset, dst0_len);
+
+ if (IS_PSEUDOPLNR(req->dst.format))
+ flush_pmem_file(p_dst_file,
+ req->dst.offset + dst0_len, dst1_len);
+#endif
+}
+
+static void mdp_start_ppp(struct msm_fb_data_type *mfd, MDPIBUF *iBuf,
+struct mdp_blit_req *req, struct file *p_src_file, struct file *p_dst_file)
+{
+ uint8 *src0, *src1;
+ uint8 *dest0, *dest1;
+ uint16 inpBpp;
+ uint32 dest0_ystride;
+ uint32 src_width;
+ uint32 src_height;
+ uint32 src0_ystride;
+ uint32 dst_roi_width;
+ uint32 dst_roi_height;
+ uint32 ppp_src_cfg_reg, ppp_operation_reg, ppp_dst_cfg_reg;
+ uint32 alpha, tpVal;
+ uint32 packPattern;
+ uint32 dst_packPattern;
+ boolean inputRGB, outputRGB, pseudoplanr_output;
+ int sv_slice, sh_slice;
+ int dv_slice, dh_slice;
+ boolean perPixelAlpha = FALSE;
+ boolean ppp_lookUp_enable = FALSE;
+
+ sv_slice = sh_slice = dv_slice = dh_slice = 1;
+ alpha = tpVal = 0;
+ src_width = iBuf->mdpImg.width;
+ src_height = iBuf->roi.y + iBuf->roi.height;
+ src1 = NULL;
+ dest1 = NULL;
+
+ inputRGB = outputRGB = TRUE;
+ pseudoplanr_output = FALSE;
+ ppp_operation_reg = 0;
+ ppp_dst_cfg_reg = 0;
+ ppp_src_cfg_reg = 0;
+
+ /* Wait for the pipe to clear */
+ do { } while (mdp_ppp_pipe_wait() <= 0);
+
+ /*
+ * destination config
+ */
+ switch (iBuf->ibuf_type) {
+ case MDP_RGB_888:
+ dst_packPattern =
+ MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 8);
+ ppp_dst_cfg_reg =
+ PPP_DST_C0G_8BIT | PPP_DST_C1B_8BIT | PPP_DST_C2R_8BIT |
+ PPP_DST_PACKET_CNT_INTERLVD_3ELEM | PPP_DST_PACK_TIGHT |
+ PPP_DST_PACK_ALIGN_LSB | PPP_DST_OUT_SEL_AXI |
+ PPP_DST_BPP_3BYTES | PPP_DST_PLANE_INTERLVD;
+ break;
+
+ case MDP_XRGB_8888:
+ case MDP_ARGB_8888:
+ case MDP_RGBA_8888:
+ if (iBuf->ibuf_type == MDP_BGRA_8888)
+ dst_packPattern =
+ MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_R, CLR_G, CLR_B,
+ 8);
+ else if (iBuf->ibuf_type == MDP_RGBA_8888)
+ dst_packPattern =
+ MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_B, CLR_G, CLR_R,
+ 8);
+ else
+ dst_packPattern =
+ MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_R, CLR_G, CLR_B,
+ 8);
+
+ ppp_dst_cfg_reg = PPP_DST_C0G_8BIT |
+ PPP_DST_C1B_8BIT |
+ PPP_DST_C2R_8BIT |
+ PPP_DST_C3A_8BIT |
+ PPP_DST_C3ALPHA_EN |
+ PPP_DST_PACKET_CNT_INTERLVD_4ELEM |
+ PPP_DST_PACK_TIGHT |
+ PPP_DST_PACK_ALIGN_LSB |
+ PPP_DST_OUT_SEL_AXI |
+ PPP_DST_BPP_4BYTES | PPP_DST_PLANE_INTERLVD;
+ break;
+
+ case MDP_Y_CBCR_H2V2:
+ case MDP_Y_CRCB_H2V2:
+ if (iBuf->ibuf_type == MDP_Y_CBCR_H2V2)
+ dst_packPattern =
+ MDP_GET_PACK_PATTERN(0, 0, CLR_CB, CLR_CR, 8);
+ else
+ dst_packPattern =
+ MDP_GET_PACK_PATTERN(0, 0, CLR_CR, CLR_CB, 8);
+
+ ppp_dst_cfg_reg = PPP_DST_C2R_8BIT |
+ PPP_DST_C0G_8BIT |
+ PPP_DST_C1B_8BIT |
+ PPP_DST_C3A_8BIT |
+ PPP_DST_PACKET_CNT_INTERLVD_2ELEM |
+ PPP_DST_PACK_TIGHT |
+ PPP_DST_PACK_ALIGN_LSB |
+ PPP_DST_OUT_SEL_AXI | PPP_DST_BPP_2BYTES;
+
+ ppp_operation_reg |= PPP_OP_DST_CHROMA_420;
+ outputRGB = FALSE;
+ pseudoplanr_output = TRUE;
+ /*
+ * vertically (y direction) and horizontally (x direction)
+ * sample reduction by 2
+ */
+
+ /*
+ * H2V2(YUV420) Cosite
+ *
+ * Y Y Y Y
+ * CbCr CbCr
+ * Y Y Y Y
+ * Y Y Y Y
+ * CbCr CbCr
+ * Y Y Y Y
+ */
+ dv_slice = dh_slice = 2;
+
+ /* (x,y) and (width,height) must be even numbern */
+ iBuf->roi.lcd_x = (iBuf->roi.lcd_x / 2) * 2;
+ iBuf->roi.dst_width = (iBuf->roi.dst_width / 2) * 2;
+ iBuf->roi.x = (iBuf->roi.x / 2) * 2;
+ iBuf->roi.width = (iBuf->roi.width / 2) * 2;
+
+ iBuf->roi.lcd_y = (iBuf->roi.lcd_y / 2) * 2;
+ iBuf->roi.dst_height = (iBuf->roi.dst_height / 2) * 2;
+ iBuf->roi.y = (iBuf->roi.y / 2) * 2;
+ iBuf->roi.height = (iBuf->roi.height / 2) * 2;
+ break;
+
+ case MDP_YCRYCB_H2V1:
+ dst_packPattern =
+ MDP_GET_PACK_PATTERN(CLR_Y, CLR_CR, CLR_Y, CLR_CB, 8);
+ ppp_dst_cfg_reg =
+ PPP_DST_C2R_8BIT | PPP_DST_C0G_8BIT | PPP_DST_C1B_8BIT |
+ PPP_DST_C3A_8BIT | PPP_DST_PACKET_CNT_INTERLVD_4ELEM |
+ PPP_DST_PACK_TIGHT | PPP_DST_PACK_ALIGN_LSB |
+ PPP_DST_OUT_SEL_AXI | PPP_DST_BPP_2BYTES |
+ PPP_DST_PLANE_INTERLVD;
+
+ ppp_operation_reg |= PPP_OP_DST_CHROMA_H2V1;
+ outputRGB = FALSE;
+ /*
+ * horizontally (x direction) sample reduction by 2
+ *
+ * H2V1(YUV422) Cosite
+ *
+ * YCbCr Y YCbCr Y
+ * YCbCr Y YCbCr Y
+ * YCbCr Y YCbCr Y
+ * YCbCr Y YCbCr Y
+ */
+ dh_slice = 2;
+
+ /*
+ * if it's TV-Out/MDP_YCRYCB_H2V1, let's go through the
+ * preloaded gamma setting of 2.2 when the content is
+ * non-linear ppp_lookUp_enable = TRUE;
+ */
+
+ /* x and width must be even number */
+ iBuf->roi.lcd_x = (iBuf->roi.lcd_x / 2) * 2;
+ iBuf->roi.dst_width = (iBuf->roi.dst_width / 2) * 2;
+ iBuf->roi.x = (iBuf->roi.x / 2) * 2;
+ iBuf->roi.width = (iBuf->roi.width / 2) * 2;
+ break;
+
+ case MDP_Y_CBCR_H2V1:
+ case MDP_Y_CRCB_H2V1:
+ if (iBuf->ibuf_type == MDP_Y_CBCR_H2V1)
+ dst_packPattern =
+ MDP_GET_PACK_PATTERN(0, 0, CLR_CB, CLR_CR, 8);
+ else
+ dst_packPattern =
+ MDP_GET_PACK_PATTERN(0, 0, CLR_CR, CLR_CB, 8);
+
+ ppp_dst_cfg_reg = PPP_DST_C2R_8BIT |
+ PPP_DST_C0G_8BIT |
+ PPP_DST_C1B_8BIT |
+ PPP_DST_C3A_8BIT |
+ PPP_DST_PACKET_CNT_INTERLVD_2ELEM |
+ PPP_DST_PACK_TIGHT |
+ PPP_DST_PACK_ALIGN_LSB |
+ PPP_DST_OUT_SEL_AXI | PPP_DST_BPP_2BYTES;
+
+ ppp_operation_reg |= PPP_OP_DST_CHROMA_H2V1;
+ outputRGB = FALSE;
+ pseudoplanr_output = TRUE;
+ /* horizontally (x direction) sample reduction by 2 */
+ dh_slice = 2;
+
+ /* x and width must be even number */
+ iBuf->roi.lcd_x = (iBuf->roi.lcd_x / 2) * 2;
+ iBuf->roi.dst_width = (iBuf->roi.dst_width / 2) * 2;
+ iBuf->roi.x = (iBuf->roi.x / 2) * 2;
+ iBuf->roi.width = (iBuf->roi.width / 2) * 2;
+ break;
+
+ case MDP_BGR_565:
+ case MDP_RGB_565:
+ default:
+ if (iBuf->ibuf_type == MDP_RGB_565)
+ dst_packPattern =
+ MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 8);
+ else
+ dst_packPattern =
+ MDP_GET_PACK_PATTERN(0, CLR_B, CLR_G, CLR_R, 8);
+
+ ppp_dst_cfg_reg = PPP_DST_C0G_6BIT |
+ PPP_DST_C1B_5BIT |
+ PPP_DST_C2R_5BIT |
+ PPP_DST_PACKET_CNT_INTERLVD_3ELEM |
+ PPP_DST_PACK_TIGHT |
+ PPP_DST_PACK_ALIGN_LSB |
+ PPP_DST_OUT_SEL_AXI |
+ PPP_DST_BPP_2BYTES | PPP_DST_PLANE_INTERLVD;
+ break;
+ }
+
+ /* source config */
+ switch (iBuf->mdpImg.imgType) {
+ case MDP_RGB_888:
+ inpBpp = 3;
+ /*
+ * 565 = 2bytes
+ * RGB = 3Components
+ * RGB interleaved
+ */
+ ppp_src_cfg_reg = PPP_SRC_C2R_8BITS | PPP_SRC_C0G_8BITS |
+ PPP_SRC_C1B_8BITS | PPP_SRC_BPP_INTERLVD_3BYTES |
+ PPP_SRC_INTERLVD_3COMPONENTS | PPP_SRC_UNPACK_TIGHT |
+ PPP_SRC_UNPACK_ALIGN_LSB |
+ PPP_SRC_FETCH_PLANES_INTERLVD;
+
+ packPattern = MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 8);
+
+ ppp_operation_reg |= PPP_OP_COLOR_SPACE_RGB |
+ PPP_OP_SRC_CHROMA_RGB | PPP_OP_DST_CHROMA_RGB;
+ break;
+
+ case MDP_BGRA_8888:
+ case MDP_RGBA_8888:
+ case MDP_ARGB_8888:
+ perPixelAlpha = TRUE;
+ case MDP_XRGB_8888:
+ inpBpp = 4;
+ /*
+ * 8888 = 4bytes
+ * ARGB = 4Components
+ * ARGB interleaved
+ */
+ ppp_src_cfg_reg = PPP_SRC_C2R_8BITS | PPP_SRC_C0G_8BITS |
+ PPP_SRC_C1B_8BITS | PPP_SRC_C3A_8BITS |
+ PPP_SRC_C3_ALPHA_EN | PPP_SRC_BPP_INTERLVD_4BYTES |
+ PPP_SRC_INTERLVD_4COMPONENTS | PPP_SRC_UNPACK_TIGHT |
+ PPP_SRC_UNPACK_ALIGN_LSB |
+ PPP_SRC_FETCH_PLANES_INTERLVD;
+
+ if (iBuf->mdpImg.imgType == MDP_BGRA_8888)
+ packPattern =
+ MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_R, CLR_G, CLR_B,
+ 8);
+ else if (iBuf->mdpImg.imgType == MDP_RGBA_8888)
+ packPattern =
+ MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_B, CLR_G, CLR_R,
+ 8);
+ else
+ packPattern =
+ MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_R, CLR_G, CLR_B,
+ 8);
+
+ ppp_operation_reg |= PPP_OP_COLOR_SPACE_RGB |
+ PPP_OP_SRC_CHROMA_RGB | PPP_OP_DST_CHROMA_RGB;
+ break;
+
+ case MDP_Y_CBCR_H2V2:
+ case MDP_Y_CRCB_H2V2:
+ inpBpp = 1;
+ src1 = (uint8 *) iBuf->mdpImg.cbcr_addr;
+
+ /*
+ * CbCr = 2bytes
+ * CbCr = 2Components
+ * Y+CbCr
+ */
+ ppp_src_cfg_reg = PPP_SRC_C2R_8BITS | PPP_SRC_C0G_8BITS |
+ PPP_SRC_C1B_8BITS | PPP_SRC_BPP_INTERLVD_2BYTES |
+ PPP_SRC_INTERLVD_2COMPONENTS | PPP_SRC_UNPACK_TIGHT |
+ PPP_SRC_UNPACK_ALIGN_LSB |
+ PPP_SRC_FETCH_PLANES_PSEUDOPLNR;
+
+ if (iBuf->mdpImg.imgType == MDP_Y_CRCB_H2V2)
+ packPattern =
+ MDP_GET_PACK_PATTERN(0, 0, CLR_CR, CLR_CB, 8);
+ else
+ packPattern =
+ MDP_GET_PACK_PATTERN(0, 0, CLR_CB, CLR_CR, 8);
+
+ ppp_operation_reg |= PPP_OP_COLOR_SPACE_YCBCR |
+ PPP_OP_SRC_CHROMA_420 |
+ PPP_OP_SRC_CHROMA_COSITE |
+ PPP_OP_DST_CHROMA_RGB | PPP_OP_DST_CHROMA_COSITE;
+
+ inputRGB = FALSE;
+ sh_slice = sv_slice = 2;
+ break;
+
+ case MDP_YCRYCB_H2V1:
+ inpBpp = 2;
+ ppp_src_cfg_reg = PPP_SRC_C2R_8BITS |
+ PPP_SRC_C0G_8BITS |
+ PPP_SRC_C1B_8BITS |
+ PPP_SRC_C3A_8BITS |
+ PPP_SRC_BPP_INTERLVD_2BYTES |
+ PPP_SRC_INTERLVD_4COMPONENTS |
+ PPP_SRC_UNPACK_TIGHT | PPP_SRC_UNPACK_ALIGN_LSB;
+
+ packPattern =
+ MDP_GET_PACK_PATTERN(CLR_Y, CLR_CR, CLR_Y, CLR_CB, 8);
+
+ ppp_operation_reg |= PPP_OP_SRC_CHROMA_H2V1 |
+ PPP_OP_SRC_CHROMA_COSITE | PPP_OP_DST_CHROMA_COSITE;
+
+ /*
+ * if it's TV-Out/MDP_YCRYCB_H2V1, let's go through the
+ * preloaded inverse gamma setting of 2.2 since they're
+ * symetric when the content is non-linear
+ * ppp_lookUp_enable = TRUE;
+ */
+
+ /* x and width must be even number */
+ iBuf->roi.lcd_x = (iBuf->roi.lcd_x / 2) * 2;
+ iBuf->roi.dst_width = (iBuf->roi.dst_width / 2) * 2;
+ iBuf->roi.x = (iBuf->roi.x / 2) * 2;
+ iBuf->roi.width = (iBuf->roi.width / 2) * 2;
+
+ inputRGB = FALSE;
+ sh_slice = 2;
+ break;
+
+ case MDP_Y_CBCR_H2V1:
+ case MDP_Y_CRCB_H2V1:
+ inpBpp = 1;
+ src1 = (uint8 *) iBuf->mdpImg.cbcr_addr;
+
+ ppp_src_cfg_reg = PPP_SRC_C2R_8BITS |
+ PPP_SRC_C0G_8BITS |
+ PPP_SRC_C1B_8BITS |
+ PPP_SRC_C3A_8BITS |
+ PPP_SRC_BPP_INTERLVD_2BYTES |
+ PPP_SRC_INTERLVD_2COMPONENTS |
+ PPP_SRC_UNPACK_TIGHT |
+ PPP_SRC_UNPACK_ALIGN_LSB | PPP_SRC_FETCH_PLANES_PSEUDOPLNR;
+
+ if (iBuf->mdpImg.imgType == MDP_Y_CBCR_H2V1)
+ packPattern =
+ MDP_GET_PACK_PATTERN(0, 0, CLR_CB, CLR_CR, 8);
+ else
+ packPattern =
+ MDP_GET_PACK_PATTERN(0, 0, CLR_CR, CLR_CB, 8);
+
+ ppp_operation_reg |= PPP_OP_SRC_CHROMA_H2V1 |
+ PPP_OP_SRC_CHROMA_COSITE | PPP_OP_DST_CHROMA_COSITE;
+ inputRGB = FALSE;
+ sh_slice = 2;
+ break;
+
+ case MDP_BGR_565:
+ case MDP_RGB_565:
+ default:
+ inpBpp = 2;
+ /*
+ * 565 = 2bytes
+ * RGB = 3Components
+ * RGB interleaved
+ */
+ ppp_src_cfg_reg = PPP_SRC_C2R_5BITS | PPP_SRC_C0G_6BITS |
+ PPP_SRC_C1B_5BITS | PPP_SRC_BPP_INTERLVD_2BYTES |
+ PPP_SRC_INTERLVD_3COMPONENTS | PPP_SRC_UNPACK_TIGHT |
+ PPP_SRC_UNPACK_ALIGN_LSB |
+ PPP_SRC_FETCH_PLANES_INTERLVD;
+
+ if (iBuf->mdpImg.imgType == MDP_RGB_565)
+ packPattern =
+ MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 8);
+ else
+ packPattern =
+ MDP_GET_PACK_PATTERN(0, CLR_B, CLR_G, CLR_R, 8);
+
+ ppp_operation_reg |= PPP_OP_COLOR_SPACE_RGB |
+ PPP_OP_SRC_CHROMA_RGB | PPP_OP_DST_CHROMA_RGB;
+ break;
+
+ }
+
+ if (pseudoplanr_output)
+ ppp_dst_cfg_reg |= PPP_DST_PLANE_PSEUDOPLN;
+
+ /* YCbCr to RGB color conversion flag */
+ if ((!inputRGB) && (outputRGB)) {
+ ppp_operation_reg |= PPP_OP_CONVERT_YCBCR2RGB |
+ PPP_OP_CONVERT_ON;
+
+ /*
+ * primary/secondary is sort of misleading term...but
+ * in mdp2.2/3.0 we only use primary matrix (forward/rev)
+ * in mdp3.1 we use set1(prim) and set2(secd)
+ */
+#ifdef CONFIG_FB_MSM_MDP31
+ ppp_operation_reg |= PPP_OP_CONVERT_MATRIX_SECONDARY |
+ PPP_OP_DST_RGB;
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0240, 0);
+#endif
+
+ if (ppp_lookUp_enable) {
+ ppp_operation_reg |= PPP_OP_LUT_C0_ON |
+ PPP_OP_LUT_C1_ON | PPP_OP_LUT_C2_ON;
+ }
+ }
+ /* RGB to YCbCr color conversion flag */
+ if ((inputRGB) && (!outputRGB)) {
+ ppp_operation_reg |= PPP_OP_CONVERT_RGB2YCBCR |
+ PPP_OP_CONVERT_ON;
+
+#ifdef CONFIG_FB_MSM_MDP31
+ ppp_operation_reg |= PPP_OP_CONVERT_MATRIX_PRIMARY |
+ PPP_OP_DST_YCBCR;
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0240, 0x1e);
+#endif
+
+ if (ppp_lookUp_enable) {
+ ppp_operation_reg |= PPP_OP_LUT_C0_ON |
+ PPP_OP_LUT_C1_ON | PPP_OP_LUT_C2_ON;
+ }
+ }
+ /* YCbCr to YCbCr color conversion flag */
+ if ((!inputRGB) && (!outputRGB)) {
+ if ((ppp_lookUp_enable) &&
+ (iBuf->mdpImg.imgType != iBuf->ibuf_type)) {
+ ppp_operation_reg |= PPP_OP_LUT_C0_ON;
+ }
+ }
+
+ ppp_src_cfg_reg |= (iBuf->roi.x % 2) ? PPP_SRC_BPP_ROI_ODD_X : 0;
+ ppp_src_cfg_reg |= (iBuf->roi.y % 2) ? PPP_SRC_BPP_ROI_ODD_Y : 0;
+
+ if (req->flags & MDP_DEINTERLACE)
+ ppp_operation_reg |= PPP_OP_DEINT_EN;
+
+ /* Dither at DMA side only since iBuf format is RGB888 */
+ if (iBuf->mdpImg.mdpOp & MDPOP_DITHER)
+ ppp_operation_reg |= PPP_OP_DITHER_EN;
+
+ if (iBuf->mdpImg.mdpOp & MDPOP_ROTATION) {
+ ppp_operation_reg |= PPP_OP_ROT_ON;
+
+ if (iBuf->mdpImg.mdpOp & MDPOP_ROT90) {
+ ppp_operation_reg |= PPP_OP_ROT_90;
+ }
+ if (iBuf->mdpImg.mdpOp & MDPOP_LR) {
+ ppp_operation_reg |= PPP_OP_FLIP_LR;
+ }
+ if (iBuf->mdpImg.mdpOp & MDPOP_UD) {
+ ppp_operation_reg |= PPP_OP_FLIP_UD;
+ }
+ }
+
+ src0_ystride = src_width * inpBpp;
+ dest0_ystride = iBuf->ibuf_width * iBuf->bpp;
+
+ /* no need to care about rotation since it's the real-XY. */
+ dst_roi_width = iBuf->roi.dst_width;
+ dst_roi_height = iBuf->roi.dst_height;
+
+ src0 = (uint8 *) iBuf->mdpImg.bmy_addr;
+ dest0 = (uint8 *) iBuf->buf;
+
+ /* Jumping from Y-Plane to Chroma Plane */
+ dest1 = mdp_get_chroma_addr(iBuf);
+
+ /* first pixel addr calculation */
+ mdp_adjust_start_addr(&src0, &src1, sv_slice, sh_slice, iBuf->roi.x,
+ iBuf->roi.y, src_width, src_height, inpBpp, iBuf,
+ 0);
+ mdp_adjust_start_addr(&dest0, &dest1, dv_slice, dh_slice,
+ iBuf->roi.lcd_x, iBuf->roi.lcd_y,
+ iBuf->ibuf_width, iBuf->ibuf_height, iBuf->bpp,
+ iBuf, 2);
+
+ /* set scale operation */
+ mdp_set_scale(iBuf, dst_roi_width, dst_roi_height,
+ inputRGB, outputRGB, &ppp_operation_reg);
+
+ /*
+ * setting background source for blending
+ */
+ mdp_set_blend_attr(iBuf, &alpha, &tpVal, perPixelAlpha,
+ &ppp_operation_reg);
+
+ if (ppp_operation_reg & PPP_OP_BLEND_ON) {
+ mdp_ppp_setbg(iBuf);
+
+ if (iBuf->ibuf_type == MDP_YCRYCB_H2V1) {
+ ppp_operation_reg |= PPP_OP_BG_CHROMA_H2V1;
+
+ if (iBuf->mdpImg.mdpOp & MDPOP_TRANSP) {
+ tpVal = mdp_conv_matx_rgb2yuv(tpVal,
+ (uint16 *) &
+ mdp_ccs_rgb2yuv,
+ &mdp_plv[0], NULL);
+ }
+ }
+ }
+
+ /*
+ * 0x0004: enable dbg bus
+ * 0x0100: "don't care" Edge Condit until scaling is on
+ * 0x0104: xrc tile x&y size u7.6 format = 7bit.6bit
+ * 0x0108: src pixel size
+ * 0x010c: component plane 0 starting address
+ * 0x011c: component plane 0 ystride
+ * 0x0124: PPP source config register
+ * 0x0128: unpacked pattern from lsb to msb (eg. RGB->BGR)
+ */
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0108, (iBuf->roi.height << 16 |
+ iBuf->roi.width));
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x010c, src0); /* comp.plane 0 */
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0110, src1); /* comp.plane 1 */
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x011c,
+ (src0_ystride << 16 | src0_ystride));
+
+ /* setup for rgb 565 */
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0124, ppp_src_cfg_reg);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0128, packPattern);
+ /*
+ * 0x0138: PPP destination operation register
+ * 0x014c: constant_alpha|transparent_color
+ * 0x0150: PPP destination config register
+ * 0x0154: PPP packing pattern
+ */
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0138, ppp_operation_reg);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x014c, alpha << 24 | tpVal);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0150, ppp_dst_cfg_reg);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0154, dst_packPattern);
+
+ /*
+ * 0x0164: ROI height and width
+ * 0x0168: Component Plane 0 starting addr
+ * 0x016c: Component Plane 1 starting addr
+ * 0x0178: Component Plane 1/0 y stride
+ */
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0164,
+ (dst_roi_height << 16 | dst_roi_width));
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0168, dest0);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x016c, dest1);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0178,
+ (dest0_ystride << 16 | dest0_ystride));
+
+ flush_imgs(req, inpBpp, iBuf->bpp, p_src_file, p_dst_file);
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+ mdp_ppp_process_curr_djob();
+#else
+ mdp_pipe_kickoff(MDP_PPP_TERM, mfd);
+#endif
+}
+
+static int mdp_ppp_verify_req(struct mdp_blit_req *req)
+{
+ u32 src_width, src_height, dst_width, dst_height;
+
+ if (req == NULL)
+ return -1;
+
+ if (MDP_IS_IMGTYPE_BAD(req->src.format) ||
+ MDP_IS_IMGTYPE_BAD(req->dst.format))
+ return -1;
+
+ if ((req->src.width == 0) || (req->src.height == 0) ||
+ (req->src_rect.w == 0) || (req->src_rect.h == 0) ||
+ (req->dst.width == 0) || (req->dst.height == 0) ||
+ (req->dst_rect.w == 0) || (req->dst_rect.h == 0))
+
+ return -1;
+
+ if (((req->src_rect.x + req->src_rect.w) > req->src.width) ||
+ ((req->src_rect.y + req->src_rect.h) > req->src.height))
+ return -1;
+
+ if (((req->dst_rect.x + req->dst_rect.w) > req->dst.width) ||
+ ((req->dst_rect.y + req->dst_rect.h) > req->dst.height))
+ return -1;
+
+ /*
+ * scaling range check
+ */
+ src_width = req->src_rect.w;
+ src_height = req->src_rect.h;
+
+ if (req->flags & MDP_ROT_90) {
+ dst_width = req->dst_rect.h;
+ dst_height = req->dst_rect.w;
+ } else {
+ dst_width = req->dst_rect.w;
+ dst_height = req->dst_rect.h;
+ }
+
+ switch (req->dst.format) {
+ case MDP_Y_CRCB_H2V2:
+ case MDP_Y_CBCR_H2V2:
+ src_width = (src_width / 2) * 2;
+ src_height = (src_height / 2) * 2;
+ dst_width = (src_width / 2) * 2;
+ dst_height = (src_height / 2) * 2;
+ break;
+
+ case MDP_Y_CRCB_H2V1:
+ case MDP_Y_CBCR_H2V1:
+ case MDP_YCRYCB_H2V1:
+ src_width = (src_width / 2) * 2;
+ dst_width = (src_width / 2) * 2;
+ break;
+
+ default:
+ break;
+ }
+
+ if (((MDP_SCALE_Q_FACTOR * dst_width) / src_width >
+ MDP_MAX_X_SCALE_FACTOR)
+ || ((MDP_SCALE_Q_FACTOR * dst_width) / src_width <
+ MDP_MIN_X_SCALE_FACTOR))
+ return -1;
+
+ if (((MDP_SCALE_Q_FACTOR * dst_height) / src_height >
+ MDP_MAX_Y_SCALE_FACTOR)
+ || ((MDP_SCALE_Q_FACTOR * dst_height) / src_height <
+ MDP_MIN_Y_SCALE_FACTOR))
+ return -1;
+
+ return 0;
+}
+
+/**
+ * get_gem_img() - retrieve drm obj's start address and size
+ * @img: contains drm file descriptor and gem handle
+ * @start: repository of starting address of drm obj allocated memory
+ * @len: repository of size of drm obj alloacted memory
+ *
+ **/
+int get_gem_img(struct mdp_img *img, unsigned long *start, unsigned long *len)
+{
+ panic("waaaaaaaah");
+ //return kgsl_gem_obj_addr(img->memory_id, (int)img->priv, start, len);
+}
+
+int get_img(struct mdp_img *img, struct fb_info *info, unsigned long *start,
+ unsigned long *len, struct file **pp_file)
+{
+ int put_needed, ret = 0;
+ struct file *file;
+ unsigned long vstart;
+#ifdef CONFIG_ANDROID_PMEM
+ if (!get_pmem_file(img->memory_id, start, &vstart, len, pp_file))
+ return 0;
+#endif
+ file = fget_light(img->memory_id, &put_needed);
+ if (file == NULL)
+ return -1;
+
+ if (MAJOR(file->f_dentry->d_inode->i_rdev) == FB_MAJOR) {
+ *start = info->fix.smem_start;
+ *len = info->fix.smem_len;
+ *pp_file = file;
+ } else {
+ ret = -1;
+ fput_light(file, put_needed);
+ }
+ return ret;
+}
+
+int mdp_ppp_blit(struct fb_info *info, struct mdp_blit_req *req,
+ struct file **pp_src_file, struct file **pp_dst_file)
+{
+ unsigned long src_start, dst_start;
+ unsigned long src_len = 0;
+ unsigned long dst_len = 0;
+ MDPIBUF iBuf;
+ u32 dst_width, dst_height;
+ struct file *p_src_file = 0 , *p_dst_file = 0;
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+ if (req->dst.format == MDP_FB_FORMAT)
+ req->dst.format = mfd->fb_imgType;
+ if (req->src.format == MDP_FB_FORMAT)
+ req->src.format = mfd->fb_imgType;
+
+ if (req->flags & MDP_BLIT_SRC_GEM) {
+ if (get_gem_img(&req->src, &src_start, &src_len) < 0)
+ return -1;
+ } else {
+ get_img(&req->src, info, &src_start, &src_len, &p_src_file);
+ }
+ if (src_len == 0) {
+ printk(KERN_ERR "mdp_ppp: could not retrieve image from "
+ "memory\n");
+ return -1;
+ }
+
+ if (req->flags & MDP_BLIT_DST_GEM) {
+ if (get_gem_img(&req->dst, &dst_start, &dst_len) < 0)
+ return -1;
+ } else {
+ get_img(&req->dst, info, &dst_start, &dst_len, &p_dst_file);
+ }
+ if (dst_len == 0) {
+ printk(KERN_ERR "mdp_ppp: could not retrieve image from "
+ "memory\n");
+ return -1;
+ }
+ *pp_src_file = p_src_file;
+ *pp_dst_file = p_dst_file;
+ if (mdp_ppp_verify_req(req)) {
+ printk(KERN_ERR "mdp_ppp: invalid image!\n");
+ return -1;
+ }
+
+ iBuf.ibuf_width = req->dst.width;
+ iBuf.ibuf_height = req->dst.height;
+ iBuf.bpp = bytes_per_pixel[req->dst.format];
+
+ iBuf.ibuf_type = req->dst.format;
+ iBuf.buf = (uint8 *) dst_start;
+ iBuf.buf += req->dst.offset;
+
+ iBuf.roi.lcd_x = req->dst_rect.x;
+ iBuf.roi.lcd_y = req->dst_rect.y;
+ iBuf.roi.dst_width = req->dst_rect.w;
+ iBuf.roi.dst_height = req->dst_rect.h;
+
+ iBuf.roi.x = req->src_rect.x;
+ iBuf.roi.width = req->src_rect.w;
+ iBuf.roi.y = req->src_rect.y;
+ iBuf.roi.height = req->src_rect.h;
+
+ iBuf.mdpImg.width = req->src.width;
+ iBuf.mdpImg.imgType = req->src.format;
+
+ iBuf.mdpImg.bmy_addr = (uint32 *) (src_start + req->src.offset);
+ iBuf.mdpImg.cbcr_addr =
+ (uint32 *) ((uint32) iBuf.mdpImg.bmy_addr +
+ req->src.width * req->src.height);
+
+ iBuf.mdpImg.mdpOp = MDPOP_NOP;
+
+ /* blending check */
+ if (req->transp_mask != MDP_TRANSP_NOP) {
+ iBuf.mdpImg.mdpOp |= MDPOP_TRANSP;
+ iBuf.mdpImg.tpVal = req->transp_mask;
+ iBuf.mdpImg.tpVal = mdp_calc_tpval(&iBuf.mdpImg);
+ }
+
+ req->alpha &= 0xff;
+ if (req->alpha < MDP_ALPHA_NOP) {
+ iBuf.mdpImg.mdpOp |= MDPOP_ALPHAB;
+ iBuf.mdpImg.alpha = req->alpha;
+ }
+
+ /* rotation check */
+ if (req->flags & MDP_FLIP_LR)
+ iBuf.mdpImg.mdpOp |= MDPOP_LR;
+ if (req->flags & MDP_FLIP_UD)
+ iBuf.mdpImg.mdpOp |= MDPOP_UD;
+ if (req->flags & MDP_ROT_90)
+ iBuf.mdpImg.mdpOp |= MDPOP_ROT90;
+ if (req->flags & MDP_DITHER)
+ iBuf.mdpImg.mdpOp |= MDPOP_DITHER;
+
+ if (req->flags & MDP_BLEND_FG_PREMULT) {
+#ifdef CONFIG_FB_MSM_MDP31
+ iBuf.mdpImg.mdpOp |= MDPOP_FG_PM_ALPHA;
+#else
+ return -EINVAL;
+#endif
+ }
+
+ if (req->flags & MDP_DEINTERLACE) {
+#ifdef CONFIG_FB_MSM_MDP31
+ if ((req->src.format != MDP_Y_CBCR_H2V2) &&
+ (req->src.format != MDP_Y_CRCB_H2V2))
+#endif
+ return -EINVAL;
+ }
+
+ /* scale check */
+ if (req->flags & MDP_ROT_90) {
+ dst_width = req->dst_rect.h;
+ dst_height = req->dst_rect.w;
+ } else {
+ dst_width = req->dst_rect.w;
+ dst_height = req->dst_rect.h;
+ }
+
+ if ((iBuf.roi.width != dst_width) || (iBuf.roi.height != dst_height))
+ iBuf.mdpImg.mdpOp |= MDPOP_ASCALE;
+
+ if (req->flags & MDP_BLUR) {
+#ifdef CONFIG_FB_MSM_MDP31
+ if (req->flags & MDP_SHARPENING)
+ printk(KERN_WARNING
+ "mdp: MDP_SHARPENING is set with MDP_BLUR!\n");
+ req->flags |= MDP_SHARPENING;
+ req->sharpening_strength = -127;
+#else
+ iBuf.mdpImg.mdpOp |= MDPOP_ASCALE | MDPOP_BLUR;
+
+#endif
+ }
+
+ if (req->flags & MDP_SHARPENING) {
+#ifdef CONFIG_FB_MSM_MDP31
+ if ((req->sharpening_strength > 127) ||
+ (req->sharpening_strength < -127)) {
+ printk(KERN_ERR
+ "%s: sharpening strength out of range\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ iBuf.mdpImg.mdpOp |= MDPOP_ASCALE | MDPOP_SHARPENING;
+ iBuf.mdpImg.sp_value = req->sharpening_strength & 0xff;
+#else
+ return -EINVAL;
+#endif
+ }
+
+ down(&mdp_ppp_mutex);
+ /* MDP cmd block enable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+#ifdef CONFIG_FB_MSM_MDP31
+ mdp_start_ppp(mfd, &iBuf, req, p_src_file, p_dst_file);
+#else
+ /* bg tile fetching HW workaround */
+ if (((iBuf.mdpImg.mdpOp & (MDPOP_TRANSP | MDPOP_ALPHAB)) ||
+ (req->src.format == MDP_ARGB_8888) ||
+ (req->src.format == MDP_BGRA_8888) ||
+ (req->src.format == MDP_RGBA_8888)) &&
+ (iBuf.mdpImg.mdpOp & MDPOP_ROT90) && (req->dst_rect.w <= 16)) {
+ int dst_h, src_w, i;
+
+ src_w = req->src_rect.w;
+ dst_h = iBuf.roi.dst_height;
+
+ for (i = 0; i < (req->dst_rect.h / 16); i++) {
+ /* this tile size */
+ iBuf.roi.dst_height = 16;
+ iBuf.roi.width =
+ (16 * req->src_rect.w) / req->dst_rect.h;
+
+ /* if it's out of scale range... */
+ if (((MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+ iBuf.roi.width) > MDP_MAX_X_SCALE_FACTOR)
+ iBuf.roi.width =
+ (MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+ MDP_MAX_X_SCALE_FACTOR;
+ else if (((MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+ iBuf.roi.width) < MDP_MIN_X_SCALE_FACTOR)
+ iBuf.roi.width =
+ (MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+ MDP_MIN_X_SCALE_FACTOR;
+
+ mdp_start_ppp(mfd, &iBuf, req, p_src_file, p_dst_file);
+
+ /* next tile location */
+ iBuf.roi.lcd_y += 16;
+ iBuf.roi.x += iBuf.roi.width;
+
+ /* this is for a remainder update */
+ dst_h -= 16;
+ src_w -= iBuf.roi.width;
+ }
+
+ if ((dst_h < 0) || (src_w < 0))
+ printk
+ ("msm_fb: mdp_blt_ex() unexpected result! line:%d\n",
+ __LINE__);
+
+ /* remainder update */
+ if ((dst_h > 0) && (src_w > 0)) {
+ u32 tmp_v;
+
+ iBuf.roi.dst_height = dst_h;
+ iBuf.roi.width = src_w;
+
+ if (((MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+ iBuf.roi.width) > MDP_MAX_X_SCALE_FACTOR) {
+ tmp_v =
+ (MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+ MDP_MAX_X_SCALE_FACTOR +
+ (MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) %
+ MDP_MAX_X_SCALE_FACTOR ? 1 : 0;
+
+ /* move x location as roi width gets bigger */
+ iBuf.roi.x -= tmp_v - iBuf.roi.width;
+ iBuf.roi.width = tmp_v;
+ } else
+ if (((MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+ iBuf.roi.width) < MDP_MIN_X_SCALE_FACTOR) {
+ tmp_v =
+ (MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+ MDP_MIN_X_SCALE_FACTOR +
+ (MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) %
+ MDP_MIN_X_SCALE_FACTOR ? 1 : 0;
+
+ /*
+ * we don't move x location for continuity of
+ * source image
+ */
+ iBuf.roi.width = tmp_v;
+ }
+
+ mdp_start_ppp(mfd, &iBuf, req, p_src_file, p_dst_file);
+ }
+ } else {
+ mdp_start_ppp(mfd, &iBuf, req, p_src_file, p_dst_file);
+ }
+#endif
+
+ /* MDP cmd block disable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+ up(&mdp_ppp_mutex);
+
+ return 0;
+}
diff --git a/drivers/staging/msm/mdp_ppp_dq.c b/drivers/staging/msm/mdp_ppp_dq.c
new file mode 100644
index 0000000..3dc1c0c
--- /dev/null
+++ b/drivers/staging/msm/mdp_ppp_dq.c
@@ -0,0 +1,347 @@
+/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "mdp.h"
+
+static boolean mdp_ppp_intr_flag = FALSE;
+static boolean mdp_ppp_busy_flag = FALSE;
+
+/* Queue to keep track of the completed jobs for cleaning */
+static LIST_HEAD(mdp_ppp_djob_clnrq);
+static DEFINE_SPINLOCK(mdp_ppp_djob_clnrq_lock);
+
+/* Worker to cleanup Display Jobs */
+static struct workqueue_struct *mdp_ppp_djob_clnr;
+
+/* Display Queue (DQ) for MDP PPP Block */
+static LIST_HEAD(mdp_ppp_dq);
+static DEFINE_SPINLOCK(mdp_ppp_dq_lock);
+
+/* Current Display Job for MDP PPP */
+static struct mdp_ppp_djob *curr_djob;
+
+/* Track ret code for the last opeartion */
+static int mdp_ppp_ret_code;
+
+inline int mdp_ppp_get_ret_code(void)
+{
+ return mdp_ppp_ret_code;
+}
+
+/* Push <Reg, Val> pair into DQ (if available) to later
+ * program the MDP PPP Block */
+inline void mdp_ppp_outdw(uint32_t addr, uint32_t data)
+{
+ if (curr_djob) {
+
+ /* get the last node of the list. */
+ struct mdp_ppp_roi_cmd_set *node =
+ list_entry(curr_djob->roi_cmd_list.prev,
+ struct mdp_ppp_roi_cmd_set, node);
+
+ /* If a node is already full, create a new one and add it to
+ * the list (roi_cmd_list).
+ */
+ if (node->ncmds == MDP_PPP_ROI_NODE_SIZE) {
+ node = kmalloc(sizeof(struct mdp_ppp_roi_cmd_set),
+ GFP_KERNEL);
+ if (!node) {
+ printk(KERN_ERR
+ "MDP_PPP: not enough memory.\n");
+ mdp_ppp_ret_code = -EINVAL;
+ return;
+ }
+
+ /* no ROI commands initially */
+ node->ncmds = 0;
+
+ /* add one node to roi_cmd_list. */
+ list_add_tail(&node->node, &curr_djob->roi_cmd_list);
+ }
+
+ /* register ROI commands */
+ node->cmd[node->ncmds].reg = addr;
+ node->cmd[node->ncmds].val = data;
+ node->ncmds++;
+ } else
+ /* program MDP PPP block now */
+ outpdw((addr), (data));
+}
+
+/* Initialize DQ */
+inline void mdp_ppp_dq_init(void)
+{
+ mdp_ppp_djob_clnr = create_singlethread_workqueue("MDPDJobClnrThrd");
+}
+
+/* Release resources of a job (DJob). */
+static void mdp_ppp_del_djob(struct mdp_ppp_djob *job)
+{
+ struct mdp_ppp_roi_cmd_set *node, *tmp;
+
+ /* release mem */
+ mdp_ppp_put_img(job->p_src_file, job->p_dst_file);
+
+ /* release roi_cmd_list */
+ list_for_each_entry_safe(node, tmp, &job->roi_cmd_list, node) {
+ list_del(&node->node);
+ kfree(node);
+ }
+
+ /* release job struct */
+ kfree(job);
+}
+
+/* Worker thread to reclaim resources once a display job is done */
+static void mdp_ppp_djob_cleaner(struct work_struct *work)
+{
+ struct mdp_ppp_djob *job;
+
+ MDP_PPP_DEBUG_MSG("mdp ppp display job cleaner started \n");
+
+ /* cleanup display job */
+ job = container_of(work, struct mdp_ppp_djob, cleaner.work);
+ if (likely(work && job))
+ mdp_ppp_del_djob(job);
+}
+
+/* Create a new Display Job (DJob) */
+inline struct mdp_ppp_djob *mdp_ppp_new_djob(void)
+{
+ struct mdp_ppp_djob *job;
+ struct mdp_ppp_roi_cmd_set *node;
+
+ /* create a new djob */
+ job = kmalloc(sizeof(struct mdp_ppp_djob), GFP_KERNEL);
+ if (!job)
+ return NULL;
+
+ /* add the first node to curr_djob->roi_cmd_list */
+ node = kmalloc(sizeof(struct mdp_ppp_roi_cmd_set), GFP_KERNEL);
+ if (!node) {
+ kfree(job);
+ return NULL;
+ }
+
+ /* make this current djob container to keep track of the curr djob not
+ * used in the async path i.e. no sync needed
+ *
+ * Should not contain any references from the past djob
+ */
+ BUG_ON(curr_djob);
+ curr_djob = job;
+ INIT_LIST_HEAD(&curr_djob->roi_cmd_list);
+
+ /* no ROI commands initially */
+ node->ncmds = 0;
+ INIT_LIST_HEAD(&node->node);
+ list_add_tail(&node->node, &curr_djob->roi_cmd_list);
+
+ /* register this djob with the djob cleaner
+ * initializes 'work' data struct
+ */
+ INIT_DELAYED_WORK(&curr_djob->cleaner, mdp_ppp_djob_cleaner);
+ INIT_LIST_HEAD(&curr_djob->entry);
+
+ curr_djob->p_src_file = 0;
+ curr_djob->p_dst_file = 0;
+
+ return job;
+}
+
+/* Undo the effect of mdp_ppp_new_djob() */
+inline void mdp_ppp_clear_curr_djob(void)
+{
+ if (likely(curr_djob)) {
+ mdp_ppp_del_djob(curr_djob);
+ curr_djob = NULL;
+ }
+}
+
+/* Cleanup dirty djobs */
+static void mdp_ppp_flush_dirty_djobs(void *cond)
+{
+ unsigned long flags;
+ struct mdp_ppp_djob *job;
+
+ /* Flush the jobs from the djob clnr queue */
+ while (cond && test_bit(0, (unsigned long *)cond)) {
+
+ /* Until we are done with the cleanup queue */
+ spin_lock_irqsave(&mdp_ppp_djob_clnrq_lock, flags);
+ if (list_empty(&mdp_ppp_djob_clnrq)) {
+ spin_unlock_irqrestore(&mdp_ppp_djob_clnrq_lock, flags);
+ break;
+ }
+
+ MDP_PPP_DEBUG_MSG("flushing djobs ... loop \n");
+
+ /* Retrieve the job that needs to be cleaned */
+ job = list_entry(mdp_ppp_djob_clnrq.next,
+ struct mdp_ppp_djob, entry);
+ list_del_init(&job->entry);
+ spin_unlock_irqrestore(&mdp_ppp_djob_clnrq_lock, flags);
+
+ /* Keep mem state coherent */
+ msm_fb_ensure_mem_coherency_after_dma(job->info, &job->req, 1);
+
+ /* Schedule jobs for cleanup
+ * A seperate worker thread does this */
+ queue_delayed_work(mdp_ppp_djob_clnr, &job->cleaner,
+ mdp_timer_duration);
+ }
+}
+
+/* If MDP PPP engine is busy, wait until it is available again */
+void mdp_ppp_wait(void)
+{
+ unsigned long flags;
+ int cond = 1;
+
+ /* keep flushing dirty djobs as long as MDP PPP engine is busy */
+ mdp_ppp_flush_dirty_djobs(&mdp_ppp_busy_flag);
+
+ /* block if MDP PPP engine is still busy */
+ spin_lock_irqsave(&mdp_ppp_dq_lock, flags);
+ if (test_bit(0, (unsigned long *)&mdp_ppp_busy_flag)) {
+
+ /* prepare for the wakeup event */
+ test_and_set_bit(0, (unsigned long *)&mdp_ppp_waiting);
+ INIT_COMPLETION(mdp_ppp_comp);
+ spin_unlock_irqrestore(&mdp_ppp_dq_lock, flags);
+
+ /* block uninterruptibly until available */
+ MDP_PPP_DEBUG_MSG("waiting for mdp... \n");
+ wait_for_completion_killable(&mdp_ppp_comp);
+
+ /* if MDP PPP engine is still free,
+ * disable INT_MDP if enabled
+ */
+ spin_lock_irqsave(&mdp_ppp_dq_lock, flags);
+ if (!test_bit(0, (unsigned long *)&mdp_ppp_busy_flag) &&
+ test_and_clear_bit(0, (unsigned long *)&mdp_ppp_intr_flag))
+ mdp_disable_irq(MDP_PPP_TERM);
+ }
+ spin_unlock_irqrestore(&mdp_ppp_dq_lock, flags);
+
+ /* flush remaining dirty djobs, if any */
+ mdp_ppp_flush_dirty_djobs(&cond);
+}
+
+/* Program MDP PPP block to process this ROI */
+static void mdp_ppp_process_roi(struct list_head *roi_cmd_list)
+{
+
+ /* program PPP engine with registered ROI commands */
+ struct mdp_ppp_roi_cmd_set *node;
+ list_for_each_entry(node, roi_cmd_list, node) {
+ int i = 0;
+ for (; i < node->ncmds; i++) {
+ MDP_PPP_DEBUG_MSG("%d: reg: 0x%x val: 0x%x \n",
+ i, node->cmd[i].reg, node->cmd[i].val);
+ outpdw(node->cmd[i].reg, node->cmd[i].val);
+ }
+ }
+
+ /* kickoff MDP PPP engine */
+ MDP_PPP_DEBUG_MSG("kicking off mdp \n");
+ outpdw(MDP_BASE + 0x30, 0x1000);
+}
+
+/* Submit this display job to MDP PPP engine */
+static void mdp_ppp_dispatch_djob(struct mdp_ppp_djob *job)
+{
+ /* enable INT_MDP if disabled */
+ if (!test_and_set_bit(0, (unsigned long *)&mdp_ppp_intr_flag))
+ mdp_enable_irq(MDP_PPP_TERM);
+
+ /* turn on PPP and CMD blocks */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+ mdp_pipe_ctrl(MDP_PPP_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+ /* process this ROI */
+ mdp_ppp_process_roi(&job->roi_cmd_list);
+}
+
+/* Enqueue this display job to be cleaned up later in "mdp_ppp_djob_done" */
+static inline void mdp_ppp_enqueue_djob(struct mdp_ppp_djob *job)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&mdp_ppp_dq_lock, flags);
+ list_add_tail(&job->entry, &mdp_ppp_dq);
+ spin_unlock_irqrestore(&mdp_ppp_dq_lock, flags);
+}
+
+/* First enqueue display job for cleanup and dispatch immediately
+ * if MDP PPP engine is free */
+void mdp_ppp_process_curr_djob(void)
+{
+ /* enqueue djob */
+ mdp_ppp_enqueue_djob(curr_djob);
+
+ /* dispatch now if MDP PPP engine is free */
+ if (!test_and_set_bit(0, (unsigned long *)&mdp_ppp_busy_flag))
+ mdp_ppp_dispatch_djob(curr_djob);
+
+ /* done with the current djob */
+ curr_djob = NULL;
+}
+
+/* Called from mdp_isr - cleanup finished job and start with next
+ * if available else set MDP PPP engine free */
+void mdp_ppp_djob_done(void)
+{
+ struct mdp_ppp_djob *curr, *next;
+ unsigned long flags;
+
+ /* dequeue current */
+ spin_lock_irqsave(&mdp_ppp_dq_lock, flags);
+ curr = list_entry(mdp_ppp_dq.next, struct mdp_ppp_djob, entry);
+ list_del_init(&curr->entry);
+ spin_unlock_irqrestore(&mdp_ppp_dq_lock, flags);
+
+ /* cleanup current - enqueue in the djob clnr queue */
+ spin_lock_irqsave(&mdp_ppp_djob_clnrq_lock, flags);
+ list_add_tail(&curr->entry, &mdp_ppp_djob_clnrq);
+ spin_unlock_irqrestore(&mdp_ppp_djob_clnrq_lock, flags);
+
+ /* grab next pending */
+ spin_lock_irqsave(&mdp_ppp_dq_lock, flags);
+ if (!list_empty(&mdp_ppp_dq)) {
+ next = list_entry(mdp_ppp_dq.next, struct mdp_ppp_djob,
+ entry);
+ spin_unlock_irqrestore(&mdp_ppp_dq_lock, flags);
+
+ /* process next in the queue */
+ mdp_ppp_process_roi(&next->roi_cmd_list);
+ } else {
+ /* no pending display job */
+ spin_unlock_irqrestore(&mdp_ppp_dq_lock, flags);
+
+ /* turn off PPP and CMD blocks - "in_isr" is TRUE */
+ mdp_pipe_ctrl(MDP_PPP_BLOCK, MDP_BLOCK_POWER_OFF, TRUE);
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, TRUE);
+
+ /* notify if waiting */
+ if (test_and_clear_bit(0, (unsigned long *)&mdp_ppp_waiting))
+ complete(&mdp_ppp_comp);
+
+ /* set free */
+ test_and_clear_bit(0, (unsigned long *)&mdp_ppp_busy_flag);
+ }
+}
diff --git a/drivers/staging/msm/mdp_ppp_dq.h b/drivers/staging/msm/mdp_ppp_dq.h
new file mode 100644
index 0000000..03e4e9a
--- /dev/null
+++ b/drivers/staging/msm/mdp_ppp_dq.h
@@ -0,0 +1,86 @@
+/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ * * Neither the name of Code Aurora Forum, Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MDP_PPP_DQ_H
+#define MDP_PPP_DQ_H
+
+#include "msm_fb_def.h"
+
+#define MDP_PPP_DEBUG_MSG MSM_FB_DEBUG
+
+/* The maximum number of <Reg,Val> pairs in an mdp_ppp_roi_cmd_set structure (a
+ * node)
+ */
+#define MDP_PPP_ROI_NODE_SIZE 32
+
+/* ROI config command (<Reg,Val> pair) for MDP PPP block */
+struct mdp_ppp_roi_cmd {
+ uint32_t reg;
+ uint32_t val;
+};
+
+/* ROI config commands for MDP PPP block are stored in a list of
+ * mdp_ppp_roi_cmd_set structures (nodes).
+ */
+struct mdp_ppp_roi_cmd_set {
+ struct list_head node;
+ uint32_t ncmds; /* number of commands in this set (node). */
+ struct mdp_ppp_roi_cmd cmd[MDP_PPP_ROI_NODE_SIZE];
+};
+
+/* MDP PPP Display Job (DJob) */
+struct mdp_ppp_djob {
+ struct list_head entry;
+ /* One ROI per MDP PPP DJob */
+ struct list_head roi_cmd_list;
+ struct mdp_blit_req req;
+ struct fb_info *info;
+ struct delayed_work cleaner;
+ struct file *p_src_file, *p_dst_file;
+};
+
+extern struct completion mdp_ppp_comp;
+extern boolean mdp_ppp_waiting;
+extern unsigned long mdp_timer_duration;
+
+unsigned int mdp_ppp_async_op_get(void);
+void mdp_ppp_async_op_set(unsigned int flag);
+void msm_fb_ensure_mem_coherency_after_dma(struct fb_info *info,
+ struct mdp_blit_req *req_list, int req_list_count);
+void mdp_ppp_put_img(struct file *p_src_file, struct file *p_dst_file);
+void mdp_ppp_dq_init(void);
+void mdp_ppp_outdw(uint32_t addr, uint32_t data);
+struct mdp_ppp_djob *mdp_ppp_new_djob(void);
+void mdp_ppp_clear_curr_djob(void);
+void mdp_ppp_process_curr_djob(void);
+int mdp_ppp_get_ret_code(void);
+void mdp_ppp_djob_done(void);
+void mdp_ppp_wait(void);
+
+#endif /* MDP_PPP_DQ_H */
diff --git a/drivers/staging/msm/mdp_ppp_v20.c b/drivers/staging/msm/mdp_ppp_v20.c
new file mode 100644
index 0000000..b5b7271
--- /dev/null
+++ b/drivers/staging/msm/mdp_ppp_v20.c
@@ -0,0 +1,2486 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include "linux/proc_fs.h"
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <asm/div64.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+
+static MDP_SCALE_MODE mdp_curr_up_scale_xy;
+static MDP_SCALE_MODE mdp_curr_down_scale_x;
+static MDP_SCALE_MODE mdp_curr_down_scale_y;
+
+static long long mdp_do_div(long long num, long long den)
+{
+ do_div(num, den);
+ return num;
+}
+
+struct mdp_table_entry mdp_gaussian_blur_table[] = {
+ /* max variance */
+ { 0x5fffc, 0x20000080 },
+ { 0x50280, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50284, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50288, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x5028c, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50290, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50294, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50298, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x5029c, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502a0, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502a4, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502a8, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502ac, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502b0, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502b4, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502b8, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502bc, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502c0, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502c4, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502c8, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502cc, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502d0, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502d4, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502d8, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502dc, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502e0, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502e4, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502e8, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502ec, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502f0, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502f4, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502f8, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x502fc, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50300, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50304, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50308, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x5030c, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50310, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50314, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50318, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x5031c, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50320, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50324, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50328, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x5032c, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50330, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50334, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50338, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x5033c, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50340, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50344, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50348, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x5034c, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50350, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50354, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50358, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x5035c, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50360, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50364, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50368, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x5036c, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50370, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50374, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x50378, 0x20000080 },
+ { 0x5fffc, 0x20000080 },
+ { 0x5037c, 0x20000080 },
+};
+
+static void load_scale_table(
+ struct mdp_table_entry *table, int len)
+{
+ int i;
+ for (i = 0; i < len; i++)
+ MDP_OUTP(MDP_BASE + table[i].reg, table[i].val);
+}
+
+static void mdp_load_pr_upscale_table(void)
+{
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50200, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50204, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50208, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5020c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50210, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50214, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50218, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5021c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50220, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50224, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50228, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5022c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50230, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50234, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50238, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5023c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50240, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50244, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50248, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x5024c, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50250, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50254, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50258, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x5025c, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50260, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50264, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50268, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x5026c, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50270, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50274, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50278, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x5027c, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_x_point2TOpoint4(void)
+{
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50280, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50284, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50288, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5028c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50290, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50294, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50298, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5029c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502a0, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502a4, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502a8, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502ac, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502b0, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502b4, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502b8, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502bc, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502c0, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502c4, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502c8, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502cc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502d0, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502d4, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502d8, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502dc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502e0, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502e4, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502e8, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502ec, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502f0, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502f4, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502f8, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502fc, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_y_point2TOpoint4(void)
+{
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50300, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50304, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50308, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5030c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50310, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50314, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50318, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5031c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50320, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50324, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50328, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5032c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50330, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50334, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50338, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5033c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50340, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50344, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50348, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x5034c, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50350, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50354, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50358, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x5035c, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50360, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50364, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50368, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x5036c, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50370, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50374, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50378, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x5037c, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_x_point4TOpoint6(void)
+{
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50280, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50284, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50288, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5028c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50290, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50294, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50298, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5029c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502a0, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502a4, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502a8, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502ac, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502b0, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502b4, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502b8, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502bc, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502c0, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502c4, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502c8, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502cc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502d0, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502d4, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502d8, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502dc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502e0, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502e4, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502e8, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502ec, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502f0, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502f4, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502f8, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502fc, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_y_point4TOpoint6(void)
+{
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50300, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50304, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50308, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5030c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50310, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50314, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50318, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5031c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50320, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50324, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50328, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5032c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50330, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50334, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50338, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5033c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50340, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50344, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50348, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x5034c, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50350, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50354, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50358, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x5035c, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50360, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50364, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50368, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x5036c, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50370, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50374, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50378, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x5037c, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_x_point6TOpoint8(void)
+{
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50280, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50284, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50288, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5028c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50290, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50294, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50298, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5029c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502a0, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502a4, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502a8, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502ac, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502b0, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502b4, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502b8, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502bc, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502c0, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502c4, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502c8, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502cc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502d0, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502d4, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502d8, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502dc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502e0, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502e4, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502e8, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502ec, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502f0, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502f4, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502f8, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502fc, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_y_point6TOpoint8(void)
+{
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50300, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50304, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50308, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5030c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50310, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50314, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50318, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5031c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50320, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50324, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50328, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5032c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50330, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50334, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50338, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5033c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50340, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50344, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50348, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x5034c, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50350, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50354, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50358, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x5035c, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50360, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50364, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50368, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x5036c, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50370, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50374, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50378, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x5037c, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_x_point8TO1(void)
+{
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50280, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50284, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50288, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5028c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50290, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50294, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50298, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5029c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502a0, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502a4, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502a8, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502ac, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502b0, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502b4, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502b8, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x502bc, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502c0, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502c4, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502c8, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502cc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502d0, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502d4, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502d8, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502dc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502e0, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502e4, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502e8, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502ec, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502f0, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502f4, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502f8, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x502fc, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_y_point8TO1(void)
+{
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50300, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50304, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50308, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5030c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50310, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50314, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50318, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5031c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50320, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50324, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50328, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5032c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50330, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50334, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50338, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5033c, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50340, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50344, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50348, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x5034c, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50350, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50354, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50358, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x5035c, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50360, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50364, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50368, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x5036c, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50370, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50374, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x50378, 0x0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+ MDP_OUTP(MDP_BASE + 0x5037c, 0x0);
+}
+
+static void mdp_load_bc_upscale_table(void)
+{
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50200, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xff80000d);
+ MDP_OUTP(MDP_BASE + 0x50204, 0x7ec003f9);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfec0001c);
+ MDP_OUTP(MDP_BASE + 0x50208, 0x7d4003f3);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe40002b);
+ MDP_OUTP(MDP_BASE + 0x5020c, 0x7b8003ed);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfd80003c);
+ MDP_OUTP(MDP_BASE + 0x50210, 0x794003e8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfcc0004d);
+ MDP_OUTP(MDP_BASE + 0x50214, 0x76c003e4);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfc40005f);
+ MDP_OUTP(MDP_BASE + 0x50218, 0x73c003e0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfb800071);
+ MDP_OUTP(MDP_BASE + 0x5021c, 0x708003de);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfac00085);
+ MDP_OUTP(MDP_BASE + 0x50220, 0x6d0003db);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfa000098);
+ MDP_OUTP(MDP_BASE + 0x50224, 0x698003d9);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf98000ac);
+ MDP_OUTP(MDP_BASE + 0x50228, 0x654003d8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf8c000c1);
+ MDP_OUTP(MDP_BASE + 0x5022c, 0x610003d7);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf84000d5);
+ MDP_OUTP(MDP_BASE + 0x50230, 0x5c8003d7);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf7c000e9);
+ MDP_OUTP(MDP_BASE + 0x50234, 0x580003d7);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf74000fd);
+ MDP_OUTP(MDP_BASE + 0x50238, 0x534003d8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6c00112);
+ MDP_OUTP(MDP_BASE + 0x5023c, 0x4e8003d8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6800126);
+ MDP_OUTP(MDP_BASE + 0x50240, 0x494003da);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf600013a);
+ MDP_OUTP(MDP_BASE + 0x50244, 0x448003db);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf600014d);
+ MDP_OUTP(MDP_BASE + 0x50248, 0x3f4003dd);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00160);
+ MDP_OUTP(MDP_BASE + 0x5024c, 0x3a4003df);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00172);
+ MDP_OUTP(MDP_BASE + 0x50250, 0x354003e1);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00184);
+ MDP_OUTP(MDP_BASE + 0x50254, 0x304003e3);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6000195);
+ MDP_OUTP(MDP_BASE + 0x50258, 0x2b0003e6);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf64001a6);
+ MDP_OUTP(MDP_BASE + 0x5025c, 0x260003e8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6c001b4);
+ MDP_OUTP(MDP_BASE + 0x50260, 0x214003eb);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf78001c2);
+ MDP_OUTP(MDP_BASE + 0x50264, 0x1c4003ee);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf80001cf);
+ MDP_OUTP(MDP_BASE + 0x50268, 0x17c003f1);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf90001db);
+ MDP_OUTP(MDP_BASE + 0x5026c, 0x134003f3);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfa0001e5);
+ MDP_OUTP(MDP_BASE + 0x50270, 0xf0003f6);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfb4001ee);
+ MDP_OUTP(MDP_BASE + 0x50274, 0xac003f9);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfcc001f5);
+ MDP_OUTP(MDP_BASE + 0x50278, 0x70003fb);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe4001fb);
+ MDP_OUTP(MDP_BASE + 0x5027c, 0x34003fe);
+}
+
+static void mdp_load_bc_downscale_table_x_point2TOpoint4(void)
+{
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ac00084);
+ MDP_OUTP(MDP_BASE + 0x50280, 0x23400083);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b000084);
+ MDP_OUTP(MDP_BASE + 0x50284, 0x23000083);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b400084);
+ MDP_OUTP(MDP_BASE + 0x50288, 0x23000082);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b400085);
+ MDP_OUTP(MDP_BASE + 0x5028c, 0x23000081);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b800085);
+ MDP_OUTP(MDP_BASE + 0x50290, 0x23000080);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1bc00086);
+ MDP_OUTP(MDP_BASE + 0x50294, 0x22c0007f);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1c000086);
+ MDP_OUTP(MDP_BASE + 0x50298, 0x2280007f);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1c400086);
+ MDP_OUTP(MDP_BASE + 0x5029c, 0x2280007e);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1c800086);
+ MDP_OUTP(MDP_BASE + 0x502a0, 0x2280007d);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1cc00086);
+ MDP_OUTP(MDP_BASE + 0x502a4, 0x2240007d);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1cc00087);
+ MDP_OUTP(MDP_BASE + 0x502a8, 0x2240007c);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d000087);
+ MDP_OUTP(MDP_BASE + 0x502ac, 0x2240007b);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d400087);
+ MDP_OUTP(MDP_BASE + 0x502b0, 0x2200007b);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d400088);
+ MDP_OUTP(MDP_BASE + 0x502b4, 0x22400079);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d800088);
+ MDP_OUTP(MDP_BASE + 0x502b8, 0x22400078);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1dc00088);
+ MDP_OUTP(MDP_BASE + 0x502bc, 0x22400077);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1dc00089);
+ MDP_OUTP(MDP_BASE + 0x502c0, 0x22000077);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1e000089);
+ MDP_OUTP(MDP_BASE + 0x502c4, 0x22000076);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1e400089);
+ MDP_OUTP(MDP_BASE + 0x502c8, 0x22000075);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ec00088);
+ MDP_OUTP(MDP_BASE + 0x502cc, 0x21c00075);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ec00089);
+ MDP_OUTP(MDP_BASE + 0x502d0, 0x21c00074);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f000089);
+ MDP_OUTP(MDP_BASE + 0x502d4, 0x21c00073);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f400089);
+ MDP_OUTP(MDP_BASE + 0x502d8, 0x21800073);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f40008a);
+ MDP_OUTP(MDP_BASE + 0x502dc, 0x21800072);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f80008a);
+ MDP_OUTP(MDP_BASE + 0x502e0, 0x21800071);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1fc0008a);
+ MDP_OUTP(MDP_BASE + 0x502e4, 0x21800070);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1fc0008b);
+ MDP_OUTP(MDP_BASE + 0x502e8, 0x2180006f);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x2000008c);
+ MDP_OUTP(MDP_BASE + 0x502ec, 0x2140006e);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x2040008c);
+ MDP_OUTP(MDP_BASE + 0x502f0, 0x2140006d);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x2080008c);
+ MDP_OUTP(MDP_BASE + 0x502f4, 0x2100006d);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x20c0008c);
+ MDP_OUTP(MDP_BASE + 0x502f8, 0x2100006c);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x20c0008d);
+ MDP_OUTP(MDP_BASE + 0x502fc, 0x2100006b);
+}
+
+static void mdp_load_bc_downscale_table_y_point2TOpoint4(void)
+{
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ac00084);
+ MDP_OUTP(MDP_BASE + 0x50300, 0x23400083);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b000084);
+ MDP_OUTP(MDP_BASE + 0x50304, 0x23000083);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b400084);
+ MDP_OUTP(MDP_BASE + 0x50308, 0x23000082);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b400085);
+ MDP_OUTP(MDP_BASE + 0x5030c, 0x23000081);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b800085);
+ MDP_OUTP(MDP_BASE + 0x50310, 0x23000080);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1bc00086);
+ MDP_OUTP(MDP_BASE + 0x50314, 0x22c0007f);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1c000086);
+ MDP_OUTP(MDP_BASE + 0x50318, 0x2280007f);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1c400086);
+ MDP_OUTP(MDP_BASE + 0x5031c, 0x2280007e);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1c800086);
+ MDP_OUTP(MDP_BASE + 0x50320, 0x2280007d);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1cc00086);
+ MDP_OUTP(MDP_BASE + 0x50324, 0x2240007d);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1cc00087);
+ MDP_OUTP(MDP_BASE + 0x50328, 0x2240007c);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d000087);
+ MDP_OUTP(MDP_BASE + 0x5032c, 0x2240007b);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d400087);
+ MDP_OUTP(MDP_BASE + 0x50330, 0x2200007b);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d400088);
+ MDP_OUTP(MDP_BASE + 0x50334, 0x22400079);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d800088);
+ MDP_OUTP(MDP_BASE + 0x50338, 0x22400078);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1dc00088);
+ MDP_OUTP(MDP_BASE + 0x5033c, 0x22400077);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1dc00089);
+ MDP_OUTP(MDP_BASE + 0x50340, 0x22000077);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1e000089);
+ MDP_OUTP(MDP_BASE + 0x50344, 0x22000076);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1e400089);
+ MDP_OUTP(MDP_BASE + 0x50348, 0x22000075);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ec00088);
+ MDP_OUTP(MDP_BASE + 0x5034c, 0x21c00075);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ec00089);
+ MDP_OUTP(MDP_BASE + 0x50350, 0x21c00074);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f000089);
+ MDP_OUTP(MDP_BASE + 0x50354, 0x21c00073);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f400089);
+ MDP_OUTP(MDP_BASE + 0x50358, 0x21800073);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f40008a);
+ MDP_OUTP(MDP_BASE + 0x5035c, 0x21800072);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f80008a);
+ MDP_OUTP(MDP_BASE + 0x50360, 0x21800071);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1fc0008a);
+ MDP_OUTP(MDP_BASE + 0x50364, 0x21800070);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1fc0008b);
+ MDP_OUTP(MDP_BASE + 0x50368, 0x2180006f);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x2000008c);
+ MDP_OUTP(MDP_BASE + 0x5036c, 0x2140006e);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x2040008c);
+ MDP_OUTP(MDP_BASE + 0x50370, 0x2140006d);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x2080008c);
+ MDP_OUTP(MDP_BASE + 0x50374, 0x2100006d);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x20c0008c);
+ MDP_OUTP(MDP_BASE + 0x50378, 0x2100006c);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x20c0008d);
+ MDP_OUTP(MDP_BASE + 0x5037c, 0x2100006b);
+}
+
+static void mdp_load_bc_downscale_table_x_point4TOpoint6(void)
+{
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x740008c);
+ MDP_OUTP(MDP_BASE + 0x50280, 0x33800088);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x800008e);
+ MDP_OUTP(MDP_BASE + 0x50284, 0x33400084);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x8400092);
+ MDP_OUTP(MDP_BASE + 0x50288, 0x33000080);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x9000094);
+ MDP_OUTP(MDP_BASE + 0x5028c, 0x3300007b);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x9c00098);
+ MDP_OUTP(MDP_BASE + 0x50290, 0x32400077);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xa40009b);
+ MDP_OUTP(MDP_BASE + 0x50294, 0x32000073);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xb00009d);
+ MDP_OUTP(MDP_BASE + 0x50298, 0x31c0006f);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xbc000a0);
+ MDP_OUTP(MDP_BASE + 0x5029c, 0x3140006b);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xc8000a2);
+ MDP_OUTP(MDP_BASE + 0x502a0, 0x31000067);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xd8000a5);
+ MDP_OUTP(MDP_BASE + 0x502a4, 0x30800062);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xe4000a8);
+ MDP_OUTP(MDP_BASE + 0x502a8, 0x2fc0005f);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xec000aa);
+ MDP_OUTP(MDP_BASE + 0x502ac, 0x2fc0005b);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf8000ad);
+ MDP_OUTP(MDP_BASE + 0x502b0, 0x2f400057);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x108000b0);
+ MDP_OUTP(MDP_BASE + 0x502b4, 0x2e400054);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x114000b2);
+ MDP_OUTP(MDP_BASE + 0x502b8, 0x2e000050);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x124000b4);
+ MDP_OUTP(MDP_BASE + 0x502bc, 0x2d80004c);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x130000b6);
+ MDP_OUTP(MDP_BASE + 0x502c0, 0x2d000049);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x140000b8);
+ MDP_OUTP(MDP_BASE + 0x502c4, 0x2c800045);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x150000b9);
+ MDP_OUTP(MDP_BASE + 0x502c8, 0x2c000042);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x15c000bd);
+ MDP_OUTP(MDP_BASE + 0x502cc, 0x2b40003e);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x16c000bf);
+ MDP_OUTP(MDP_BASE + 0x502d0, 0x2a80003b);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x17c000bf);
+ MDP_OUTP(MDP_BASE + 0x502d4, 0x2a000039);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x188000c2);
+ MDP_OUTP(MDP_BASE + 0x502d8, 0x29400036);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x19c000c4);
+ MDP_OUTP(MDP_BASE + 0x502dc, 0x28800032);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ac000c5);
+ MDP_OUTP(MDP_BASE + 0x502e0, 0x2800002f);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1bc000c7);
+ MDP_OUTP(MDP_BASE + 0x502e4, 0x2740002c);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1cc000c8);
+ MDP_OUTP(MDP_BASE + 0x502e8, 0x26c00029);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1dc000c9);
+ MDP_OUTP(MDP_BASE + 0x502ec, 0x26000027);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ec000cc);
+ MDP_OUTP(MDP_BASE + 0x502f0, 0x25000024);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x200000cc);
+ MDP_OUTP(MDP_BASE + 0x502f4, 0x24800021);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x210000cd);
+ MDP_OUTP(MDP_BASE + 0x502f8, 0x23800020);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x220000ce);
+ MDP_OUTP(MDP_BASE + 0x502fc, 0x2300001d);
+}
+
+static void mdp_load_bc_downscale_table_y_point4TOpoint6(void)
+{
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x740008c);
+ MDP_OUTP(MDP_BASE + 0x50300, 0x33800088);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x800008e);
+ MDP_OUTP(MDP_BASE + 0x50304, 0x33400084);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x8400092);
+ MDP_OUTP(MDP_BASE + 0x50308, 0x33000080);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x9000094);
+ MDP_OUTP(MDP_BASE + 0x5030c, 0x3300007b);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x9c00098);
+ MDP_OUTP(MDP_BASE + 0x50310, 0x32400077);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xa40009b);
+ MDP_OUTP(MDP_BASE + 0x50314, 0x32000073);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xb00009d);
+ MDP_OUTP(MDP_BASE + 0x50318, 0x31c0006f);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xbc000a0);
+ MDP_OUTP(MDP_BASE + 0x5031c, 0x3140006b);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xc8000a2);
+ MDP_OUTP(MDP_BASE + 0x50320, 0x31000067);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xd8000a5);
+ MDP_OUTP(MDP_BASE + 0x50324, 0x30800062);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xe4000a8);
+ MDP_OUTP(MDP_BASE + 0x50328, 0x2fc0005f);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xec000aa);
+ MDP_OUTP(MDP_BASE + 0x5032c, 0x2fc0005b);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf8000ad);
+ MDP_OUTP(MDP_BASE + 0x50330, 0x2f400057);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x108000b0);
+ MDP_OUTP(MDP_BASE + 0x50334, 0x2e400054);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x114000b2);
+ MDP_OUTP(MDP_BASE + 0x50338, 0x2e000050);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x124000b4);
+ MDP_OUTP(MDP_BASE + 0x5033c, 0x2d80004c);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x130000b6);
+ MDP_OUTP(MDP_BASE + 0x50340, 0x2d000049);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x140000b8);
+ MDP_OUTP(MDP_BASE + 0x50344, 0x2c800045);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x150000b9);
+ MDP_OUTP(MDP_BASE + 0x50348, 0x2c000042);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x15c000bd);
+ MDP_OUTP(MDP_BASE + 0x5034c, 0x2b40003e);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x16c000bf);
+ MDP_OUTP(MDP_BASE + 0x50350, 0x2a80003b);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x17c000bf);
+ MDP_OUTP(MDP_BASE + 0x50354, 0x2a000039);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x188000c2);
+ MDP_OUTP(MDP_BASE + 0x50358, 0x29400036);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x19c000c4);
+ MDP_OUTP(MDP_BASE + 0x5035c, 0x28800032);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ac000c5);
+ MDP_OUTP(MDP_BASE + 0x50360, 0x2800002f);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1bc000c7);
+ MDP_OUTP(MDP_BASE + 0x50364, 0x2740002c);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1cc000c8);
+ MDP_OUTP(MDP_BASE + 0x50368, 0x26c00029);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1dc000c9);
+ MDP_OUTP(MDP_BASE + 0x5036c, 0x26000027);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ec000cc);
+ MDP_OUTP(MDP_BASE + 0x50370, 0x25000024);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x200000cc);
+ MDP_OUTP(MDP_BASE + 0x50374, 0x24800021);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x210000cd);
+ MDP_OUTP(MDP_BASE + 0x50378, 0x23800020);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x220000ce);
+ MDP_OUTP(MDP_BASE + 0x5037c, 0x2300001d);
+}
+
+static void mdp_load_bc_downscale_table_x_point6TOpoint8(void)
+{
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000070);
+ MDP_OUTP(MDP_BASE + 0x50280, 0x4bc00068);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000078);
+ MDP_OUTP(MDP_BASE + 0x50284, 0x4bc00060);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000080);
+ MDP_OUTP(MDP_BASE + 0x50288, 0x4b800059);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000089);
+ MDP_OUTP(MDP_BASE + 0x5028c, 0x4b000052);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe400091);
+ MDP_OUTP(MDP_BASE + 0x50290, 0x4a80004b);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe40009a);
+ MDP_OUTP(MDP_BASE + 0x50294, 0x4a000044);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe8000a3);
+ MDP_OUTP(MDP_BASE + 0x50298, 0x4940003d);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfec000ac);
+ MDP_OUTP(MDP_BASE + 0x5029c, 0x48400037);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xff0000b4);
+ MDP_OUTP(MDP_BASE + 0x502a0, 0x47800031);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xff8000bd);
+ MDP_OUTP(MDP_BASE + 0x502a4, 0x4640002b);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xc5);
+ MDP_OUTP(MDP_BASE + 0x502a8, 0x45000026);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x8000ce);
+ MDP_OUTP(MDP_BASE + 0x502ac, 0x43800021);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x10000d6);
+ MDP_OUTP(MDP_BASE + 0x502b0, 0x4240001c);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x18000df);
+ MDP_OUTP(MDP_BASE + 0x502b4, 0x40800018);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x24000e6);
+ MDP_OUTP(MDP_BASE + 0x502b8, 0x3f000014);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x30000ee);
+ MDP_OUTP(MDP_BASE + 0x502bc, 0x3d400010);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x40000f5);
+ MDP_OUTP(MDP_BASE + 0x502c0, 0x3b80000c);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x50000fc);
+ MDP_OUTP(MDP_BASE + 0x502c4, 0x39800009);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x6000102);
+ MDP_OUTP(MDP_BASE + 0x502c8, 0x37c00006);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x7000109);
+ MDP_OUTP(MDP_BASE + 0x502cc, 0x35800004);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x840010e);
+ MDP_OUTP(MDP_BASE + 0x502d0, 0x33800002);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x9800114);
+ MDP_OUTP(MDP_BASE + 0x502d4, 0x31400000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xac00119);
+ MDP_OUTP(MDP_BASE + 0x502d8, 0x2f4003fe);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xc40011e);
+ MDP_OUTP(MDP_BASE + 0x502dc, 0x2d0003fc);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xdc00121);
+ MDP_OUTP(MDP_BASE + 0x502e0, 0x2b0003fb);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf400125);
+ MDP_OUTP(MDP_BASE + 0x502e4, 0x28c003fa);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x11000128);
+ MDP_OUTP(MDP_BASE + 0x502e8, 0x268003f9);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x12c0012a);
+ MDP_OUTP(MDP_BASE + 0x502ec, 0x244003f9);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1480012c);
+ MDP_OUTP(MDP_BASE + 0x502f0, 0x224003f8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1640012e);
+ MDP_OUTP(MDP_BASE + 0x502f4, 0x200003f8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1800012f);
+ MDP_OUTP(MDP_BASE + 0x502f8, 0x1e0003f8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1a00012f);
+ MDP_OUTP(MDP_BASE + 0x502fc, 0x1c0003f8);
+}
+
+static void mdp_load_bc_downscale_table_y_point6TOpoint8(void)
+{
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000070);
+ MDP_OUTP(MDP_BASE + 0x50300, 0x4bc00068);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000078);
+ MDP_OUTP(MDP_BASE + 0x50304, 0x4bc00060);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000080);
+ MDP_OUTP(MDP_BASE + 0x50308, 0x4b800059);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000089);
+ MDP_OUTP(MDP_BASE + 0x5030c, 0x4b000052);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe400091);
+ MDP_OUTP(MDP_BASE + 0x50310, 0x4a80004b);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe40009a);
+ MDP_OUTP(MDP_BASE + 0x50314, 0x4a000044);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe8000a3);
+ MDP_OUTP(MDP_BASE + 0x50318, 0x4940003d);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfec000ac);
+ MDP_OUTP(MDP_BASE + 0x5031c, 0x48400037);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xff0000b4);
+ MDP_OUTP(MDP_BASE + 0x50320, 0x47800031);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xff8000bd);
+ MDP_OUTP(MDP_BASE + 0x50324, 0x4640002b);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xc5);
+ MDP_OUTP(MDP_BASE + 0x50328, 0x45000026);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x8000ce);
+ MDP_OUTP(MDP_BASE + 0x5032c, 0x43800021);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x10000d6);
+ MDP_OUTP(MDP_BASE + 0x50330, 0x4240001c);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x18000df);
+ MDP_OUTP(MDP_BASE + 0x50334, 0x40800018);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x24000e6);
+ MDP_OUTP(MDP_BASE + 0x50338, 0x3f000014);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x30000ee);
+ MDP_OUTP(MDP_BASE + 0x5033c, 0x3d400010);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x40000f5);
+ MDP_OUTP(MDP_BASE + 0x50340, 0x3b80000c);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x50000fc);
+ MDP_OUTP(MDP_BASE + 0x50344, 0x39800009);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x6000102);
+ MDP_OUTP(MDP_BASE + 0x50348, 0x37c00006);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x7000109);
+ MDP_OUTP(MDP_BASE + 0x5034c, 0x35800004);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x840010e);
+ MDP_OUTP(MDP_BASE + 0x50350, 0x33800002);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x9800114);
+ MDP_OUTP(MDP_BASE + 0x50354, 0x31400000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xac00119);
+ MDP_OUTP(MDP_BASE + 0x50358, 0x2f4003fe);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xc40011e);
+ MDP_OUTP(MDP_BASE + 0x5035c, 0x2d0003fc);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xdc00121);
+ MDP_OUTP(MDP_BASE + 0x50360, 0x2b0003fb);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf400125);
+ MDP_OUTP(MDP_BASE + 0x50364, 0x28c003fa);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x11000128);
+ MDP_OUTP(MDP_BASE + 0x50368, 0x268003f9);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x12c0012a);
+ MDP_OUTP(MDP_BASE + 0x5036c, 0x244003f9);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1480012c);
+ MDP_OUTP(MDP_BASE + 0x50370, 0x224003f8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1640012e);
+ MDP_OUTP(MDP_BASE + 0x50374, 0x200003f8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1800012f);
+ MDP_OUTP(MDP_BASE + 0x50378, 0x1e0003f8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x1a00012f);
+ MDP_OUTP(MDP_BASE + 0x5037c, 0x1c0003f8);
+}
+
+static void mdp_load_bc_downscale_table_x_point8TO1(void)
+{
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50280, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xff80000d);
+ MDP_OUTP(MDP_BASE + 0x50284, 0x7ec003f9);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfec0001c);
+ MDP_OUTP(MDP_BASE + 0x50288, 0x7d4003f3);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe40002b);
+ MDP_OUTP(MDP_BASE + 0x5028c, 0x7b8003ed);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfd80003c);
+ MDP_OUTP(MDP_BASE + 0x50290, 0x794003e8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfcc0004d);
+ MDP_OUTP(MDP_BASE + 0x50294, 0x76c003e4);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfc40005f);
+ MDP_OUTP(MDP_BASE + 0x50298, 0x73c003e0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfb800071);
+ MDP_OUTP(MDP_BASE + 0x5029c, 0x708003de);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfac00085);
+ MDP_OUTP(MDP_BASE + 0x502a0, 0x6d0003db);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfa000098);
+ MDP_OUTP(MDP_BASE + 0x502a4, 0x698003d9);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf98000ac);
+ MDP_OUTP(MDP_BASE + 0x502a8, 0x654003d8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf8c000c1);
+ MDP_OUTP(MDP_BASE + 0x502ac, 0x610003d7);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf84000d5);
+ MDP_OUTP(MDP_BASE + 0x502b0, 0x5c8003d7);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf7c000e9);
+ MDP_OUTP(MDP_BASE + 0x502b4, 0x580003d7);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf74000fd);
+ MDP_OUTP(MDP_BASE + 0x502b8, 0x534003d8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6c00112);
+ MDP_OUTP(MDP_BASE + 0x502bc, 0x4e8003d8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6800126);
+ MDP_OUTP(MDP_BASE + 0x502c0, 0x494003da);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf600013a);
+ MDP_OUTP(MDP_BASE + 0x502c4, 0x448003db);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf600014d);
+ MDP_OUTP(MDP_BASE + 0x502c8, 0x3f4003dd);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00160);
+ MDP_OUTP(MDP_BASE + 0x502cc, 0x3a4003df);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00172);
+ MDP_OUTP(MDP_BASE + 0x502d0, 0x354003e1);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00184);
+ MDP_OUTP(MDP_BASE + 0x502d4, 0x304003e3);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6000195);
+ MDP_OUTP(MDP_BASE + 0x502d8, 0x2b0003e6);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf64001a6);
+ MDP_OUTP(MDP_BASE + 0x502dc, 0x260003e8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6c001b4);
+ MDP_OUTP(MDP_BASE + 0x502e0, 0x214003eb);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf78001c2);
+ MDP_OUTP(MDP_BASE + 0x502e4, 0x1c4003ee);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf80001cf);
+ MDP_OUTP(MDP_BASE + 0x502e8, 0x17c003f1);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf90001db);
+ MDP_OUTP(MDP_BASE + 0x502ec, 0x134003f3);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfa0001e5);
+ MDP_OUTP(MDP_BASE + 0x502f0, 0xf0003f6);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfb4001ee);
+ MDP_OUTP(MDP_BASE + 0x502f4, 0xac003f9);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfcc001f5);
+ MDP_OUTP(MDP_BASE + 0x502f8, 0x70003fb);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe4001fb);
+ MDP_OUTP(MDP_BASE + 0x502fc, 0x34003fe);
+}
+
+static void mdp_load_bc_downscale_table_y_point8TO1(void)
+{
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+ MDP_OUTP(MDP_BASE + 0x50300, 0x7fc00000);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xff80000d);
+ MDP_OUTP(MDP_BASE + 0x50304, 0x7ec003f9);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfec0001c);
+ MDP_OUTP(MDP_BASE + 0x50308, 0x7d4003f3);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe40002b);
+ MDP_OUTP(MDP_BASE + 0x5030c, 0x7b8003ed);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfd80003c);
+ MDP_OUTP(MDP_BASE + 0x50310, 0x794003e8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfcc0004d);
+ MDP_OUTP(MDP_BASE + 0x50314, 0x76c003e4);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfc40005f);
+ MDP_OUTP(MDP_BASE + 0x50318, 0x73c003e0);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfb800071);
+ MDP_OUTP(MDP_BASE + 0x5031c, 0x708003de);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfac00085);
+ MDP_OUTP(MDP_BASE + 0x50320, 0x6d0003db);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfa000098);
+ MDP_OUTP(MDP_BASE + 0x50324, 0x698003d9);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf98000ac);
+ MDP_OUTP(MDP_BASE + 0x50328, 0x654003d8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf8c000c1);
+ MDP_OUTP(MDP_BASE + 0x5032c, 0x610003d7);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf84000d5);
+ MDP_OUTP(MDP_BASE + 0x50330, 0x5c8003d7);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf7c000e9);
+ MDP_OUTP(MDP_BASE + 0x50334, 0x580003d7);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf74000fd);
+ MDP_OUTP(MDP_BASE + 0x50338, 0x534003d8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6c00112);
+ MDP_OUTP(MDP_BASE + 0x5033c, 0x4e8003d8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6800126);
+ MDP_OUTP(MDP_BASE + 0x50340, 0x494003da);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf600013a);
+ MDP_OUTP(MDP_BASE + 0x50344, 0x448003db);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf600014d);
+ MDP_OUTP(MDP_BASE + 0x50348, 0x3f4003dd);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00160);
+ MDP_OUTP(MDP_BASE + 0x5034c, 0x3a4003df);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00172);
+ MDP_OUTP(MDP_BASE + 0x50350, 0x354003e1);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00184);
+ MDP_OUTP(MDP_BASE + 0x50354, 0x304003e3);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6000195);
+ MDP_OUTP(MDP_BASE + 0x50358, 0x2b0003e6);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf64001a6);
+ MDP_OUTP(MDP_BASE + 0x5035c, 0x260003e8);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6c001b4);
+ MDP_OUTP(MDP_BASE + 0x50360, 0x214003eb);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf78001c2);
+ MDP_OUTP(MDP_BASE + 0x50364, 0x1c4003ee);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf80001cf);
+ MDP_OUTP(MDP_BASE + 0x50368, 0x17c003f1);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xf90001db);
+ MDP_OUTP(MDP_BASE + 0x5036c, 0x134003f3);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfa0001e5);
+ MDP_OUTP(MDP_BASE + 0x50370, 0xf0003f6);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfb4001ee);
+ MDP_OUTP(MDP_BASE + 0x50374, 0xac003f9);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfcc001f5);
+ MDP_OUTP(MDP_BASE + 0x50378, 0x70003fb);
+ MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe4001fb);
+ MDP_OUTP(MDP_BASE + 0x5037c, 0x34003fe);
+}
+
+static int mdp_get_edge_cond(MDPIBUF *iBuf, uint32 *dup, uint32 *dup2)
+{
+ uint32 reg;
+ uint32 dst_roi_width; /* Dimensions of DST ROI. */
+ uint32 dst_roi_height; /* Used to calculate scaling ratios. */
+
+ /*
+ * positions of the luma pixel(relative to the image ) required for
+ * scaling the ROI
+ */
+ int32 luma_interp_point_left = 0; /* left-most luma pixel needed */
+ int32 luma_interp_point_right = 0; /* right-most luma pixel needed */
+ int32 luma_interp_point_top = 0; /* top-most luma pixel needed */
+ int32 luma_interp_point_bottom = 0; /* bottom-most luma pixel needed */
+
+ /*
+ * positions of the chroma pixel(relative to the image ) required for
+ * interpolating a chroma value at all required luma positions
+ */
+ /* left-most chroma pixel needed */
+ int32 chroma_interp_point_left = 0;
+ /* right-most chroma pixel needed */
+ int32 chroma_interp_point_right = 0;
+ /* top-most chroma pixel needed */
+ int32 chroma_interp_point_top = 0;
+ /* bottom-most chroma pixel needed */
+ int32 chroma_interp_point_bottom = 0;
+
+ /*
+ * a rectangular region within the chroma plane of the "image".
+ * Chroma pixels falling inside of this rectangle belongs to the ROI
+ */
+ int32 chroma_bound_left = 0;
+ int32 chroma_bound_right = 0;
+ int32 chroma_bound_top = 0;
+ int32 chroma_bound_bottom = 0;
+
+ /*
+ * number of chroma pixels to replicate on the left, right,
+ * top and bottom edge of the ROI.
+ */
+ int32 chroma_repeat_left = 0;
+ int32 chroma_repeat_right = 0;
+ int32 chroma_repeat_top = 0;
+ int32 chroma_repeat_bottom = 0;
+
+ /*
+ * number of luma pixels to replicate on the left, right,
+ * top and bottom edge of the ROI.
+ */
+ int32 luma_repeat_left = 0;
+ int32 luma_repeat_right = 0;
+ int32 luma_repeat_top = 0;
+ int32 luma_repeat_bottom = 0;
+
+ boolean chroma_edge_enable;
+
+ uint32 _is_scale_enabled = 0;
+ uint32 _is_yuv_offsite_vertical = 0;
+
+ /* fg edge duplicate */
+ reg = 0x0;
+
+ if (iBuf->mdpImg.mdpOp & MDPOP_ASCALE) { /* if scaling enabled */
+
+ _is_scale_enabled = 1;
+
+ /*
+ * if rotation mode involves a 90 deg rotation, flip
+ * dst_roi_width with dst_roi_height.
+ * Scaling ratios is based on source ROI dimensions, and
+ * dst ROI dimensions before rotation.
+ */
+ if (iBuf->mdpImg.mdpOp & MDPOP_ROT90) {
+ dst_roi_width = iBuf->roi.dst_height;
+ dst_roi_height = iBuf->roi.dst_width;
+ } else {
+ dst_roi_width = iBuf->roi.dst_width;
+ dst_roi_height = iBuf->roi.dst_height;
+ }
+
+ /*
+ * Find out the luma pixels needed for scaling in the
+ * x direction (LEFT and RIGHT). Locations of pixels are
+ * relative to the ROI. Upper-left corner of ROI corresponds
+ * to coordinates (0,0). Also set the number of luma pixel
+ * to repeat.
+ */
+ if (iBuf->roi.width > 3 * dst_roi_width) {
+ /* scale factor < 1/3 */
+ luma_interp_point_left = 0;
+ luma_interp_point_right = (iBuf->roi.width - 1);
+ luma_repeat_left = 0;
+ luma_repeat_right = 0;
+ } else if (iBuf->roi.width == 3 * dst_roi_width) {
+ /* scale factor == 1/3 */
+ luma_interp_point_left = 0;
+ luma_interp_point_right = (iBuf->roi.width - 1) + 1;
+ luma_repeat_left = 0;
+ luma_repeat_right = 1;
+ } else if ((iBuf->roi.width > dst_roi_width) &&
+ (iBuf->roi.width < 3 * dst_roi_width)) {
+ /* 1/3 < scale factor < 1 */
+ luma_interp_point_left = -1;
+ luma_interp_point_right = (iBuf->roi.width - 1) + 1;
+ luma_repeat_left = 1;
+ luma_repeat_right = 1;
+ }
+
+ else if (iBuf->roi.width == dst_roi_width) {
+ /* scale factor == 1 */
+ luma_interp_point_left = -1;
+ luma_interp_point_right = (iBuf->roi.width - 1) + 2;
+ luma_repeat_left = 1;
+ luma_repeat_right = 2;
+ } else { /* (iBuf->roi.width < dst_roi_width) */
+ /* scale factor > 1 */
+ luma_interp_point_left = -2;
+ luma_interp_point_right = (iBuf->roi.width - 1) + 2;
+ luma_repeat_left = 2;
+ luma_repeat_right = 2;
+ }
+
+ /*
+ * Find out the number of pixels needed for scaling in the
+ * y direction (TOP and BOTTOM). Locations of pixels are
+ * relative to the ROI. Upper-left corner of ROI corresponds
+ * to coordinates (0,0). Also set the number of luma pixel
+ * to repeat.
+ */
+ if (iBuf->roi.height > 3 * dst_roi_height) {
+ /* scale factor < 1/3 */
+ luma_interp_point_top = 0;
+ luma_interp_point_bottom = (iBuf->roi.height - 1);
+ luma_repeat_top = 0;
+ luma_repeat_bottom = 0;
+ } else if (iBuf->roi.height == 3 * dst_roi_height) {
+ /* scale factor == 1/3 */
+ luma_interp_point_top = 0;
+ luma_interp_point_bottom = (iBuf->roi.height - 1) + 1;
+ luma_repeat_top = 0;
+ luma_repeat_bottom = 1;
+ } else if ((iBuf->roi.height > dst_roi_height) &&
+ (iBuf->roi.height < 3 * dst_roi_height)) {
+ /* 1/3 < scale factor < 1 */
+ luma_interp_point_top = -1;
+ luma_interp_point_bottom = (iBuf->roi.height - 1) + 1;
+ luma_repeat_top = 1;
+ luma_repeat_bottom = 1;
+ } else if (iBuf->roi.height == dst_roi_height) {
+ /* scale factor == 1 */
+ luma_interp_point_top = -1;
+ luma_interp_point_bottom = (iBuf->roi.height - 1) + 2;
+ luma_repeat_top = 1;
+ luma_repeat_bottom = 2;
+ } else { /* (iBuf->roi.height < dst_roi_height) */
+ /* scale factor > 1 */
+ luma_interp_point_top = -2;
+ luma_interp_point_bottom = (iBuf->roi.height - 1) + 2;
+ luma_repeat_top = 2;
+ luma_repeat_bottom = 2;
+ }
+ } /* if (iBuf->scale.scale_flag) */
+ else { /* scaling disabled */
+ /*
+ * Since no scaling needed, Tile Fetch does not require any
+ * more luma pixel than what the ROI contains.
+ */
+ luma_interp_point_left = (int32) 0;
+ luma_interp_point_right = (int32) (iBuf->roi.width - 1);
+ luma_interp_point_top = (int32) 0;
+ luma_interp_point_bottom = (int32) (iBuf->roi.height - 1);
+
+ luma_repeat_left = 0;
+ luma_repeat_right = 0;
+ luma_repeat_top = 0;
+ luma_repeat_bottom = 0;
+ }
+
+ /* After adding the ROI offsets, we have locations of
+ * luma_interp_points relative to the image.
+ */
+ luma_interp_point_left += (int32) (iBuf->roi.x);
+ luma_interp_point_right += (int32) (iBuf->roi.x);
+ luma_interp_point_top += (int32) (iBuf->roi.y);
+ luma_interp_point_bottom += (int32) (iBuf->roi.y);
+
+ /*
+ * After adding the ROI offsets, we have locations of
+ * chroma_interp_points relative to the image.
+ */
+ chroma_interp_point_left = luma_interp_point_left;
+ chroma_interp_point_right = luma_interp_point_right;
+ chroma_interp_point_top = luma_interp_point_top;
+ chroma_interp_point_bottom = luma_interp_point_bottom;
+
+ chroma_edge_enable = TRUE;
+ /* find out which chroma pixels are needed for chroma upsampling. */
+ switch (iBuf->mdpImg.imgType) {
+ /*
+ * cosite in horizontal axis
+ * fully sampled in vertical axis
+ */
+ case MDP_Y_CBCR_H2V1:
+ case MDP_Y_CRCB_H2V1:
+ case MDP_YCRYCB_H2V1:
+ /* floor( luma_interp_point_left / 2 ); */
+ chroma_interp_point_left = luma_interp_point_left >> 1;
+ /* floor( ( luma_interp_point_right + 1 ) / 2 ); */
+ chroma_interp_point_right = (luma_interp_point_right + 1) >> 1;
+
+ chroma_interp_point_top = luma_interp_point_top;
+ chroma_interp_point_bottom = luma_interp_point_bottom;
+ break;
+
+ /*
+ * cosite in horizontal axis
+ * offsite in vertical axis
+ */
+ case MDP_Y_CBCR_H2V2:
+ case MDP_Y_CRCB_H2V2:
+ /* floor( luma_interp_point_left / 2) */
+ chroma_interp_point_left = luma_interp_point_left >> 1;
+
+ /* floor( ( luma_interp_point_right + 1 )/ 2 ) */
+ chroma_interp_point_right = (luma_interp_point_right + 1) >> 1;
+
+ /* floor( (luma_interp_point_top - 1 ) / 2 ) */
+ chroma_interp_point_top = (luma_interp_point_top - 1) >> 1;
+
+ /* floor( ( luma_interp_point_bottom + 1 ) / 2 ) */
+ chroma_interp_point_bottom =
+ (luma_interp_point_bottom + 1) >> 1;
+
+ _is_yuv_offsite_vertical = 1;
+ break;
+
+ default:
+ chroma_edge_enable = FALSE;
+ chroma_interp_point_left = luma_interp_point_left;
+ chroma_interp_point_right = luma_interp_point_right;
+ chroma_interp_point_top = luma_interp_point_top;
+ chroma_interp_point_bottom = luma_interp_point_bottom;
+
+ break;
+ }
+
+ /* only if the image type is in YUV domain, we calculate chroma edge */
+ if (chroma_edge_enable) {
+ /* Defines which chroma pixels belongs to the roi */
+ switch (iBuf->mdpImg.imgType) {
+ /*
+ * Cosite in horizontal direction, and fully sampled
+ * in vertical direction.
+ */
+ case MDP_Y_CBCR_H2V1:
+ case MDP_Y_CRCB_H2V1:
+ case MDP_YCRYCB_H2V1:
+ /*
+ * width of chroma ROI is 1/2 of size of luma ROI
+ * height of chroma ROI same as size of luma ROI
+ */
+ chroma_bound_left = iBuf->roi.x / 2;
+
+ /* there are half as many chroma pixel as luma pixels */
+ chroma_bound_right =
+ (iBuf->roi.width + iBuf->roi.x - 1) / 2;
+ chroma_bound_top = iBuf->roi.y;
+ chroma_bound_bottom =
+ (iBuf->roi.height + iBuf->roi.y - 1);
+ break;
+
+ case MDP_Y_CBCR_H2V2:
+ case MDP_Y_CRCB_H2V2:
+ /*
+ * cosite in horizontal dir, and offsite in vertical dir
+ * width of chroma ROI is 1/2 of size of luma ROI
+ * height of chroma ROI is 1/2 of size of luma ROI
+ */
+
+ chroma_bound_left = iBuf->roi.x / 2;
+ chroma_bound_right =
+ (iBuf->roi.width + iBuf->roi.x - 1) / 2;
+ chroma_bound_top = iBuf->roi.y / 2;
+ chroma_bound_bottom =
+ (iBuf->roi.height + iBuf->roi.y - 1) / 2;
+ break;
+
+ default:
+ /*
+ * If no valid chroma sub-sampling format specified,
+ * assume 4:4:4 ( i.e. fully sampled). Set ROI
+ * boundaries for chroma same as ROI boundaries for
+ * luma.
+ */
+ chroma_bound_left = iBuf->roi.x;
+ chroma_bound_right = iBuf->roi.width + iBuf->roi.x - 1;
+ chroma_bound_top = iBuf->roi.y;
+ chroma_bound_bottom =
+ (iBuf->roi.height + iBuf->roi.y - 1);
+ break;
+ }
+
+ /*
+ * Knowing which chroma pixels are needed, and which chroma
+ * pixels belong to the ROI (i.e. available for fetching ),
+ * calculate how many chroma pixels Tile Fetch needs to
+ * duplicate. If any required chroma pixels falls outside
+ * of the ROI, Tile Fetch must obtain them by replicating
+ * pixels.
+ */
+ if (chroma_bound_left > chroma_interp_point_left)
+ chroma_repeat_left =
+ chroma_bound_left - chroma_interp_point_left;
+ else
+ chroma_repeat_left = 0;
+
+ if (chroma_interp_point_right > chroma_bound_right)
+ chroma_repeat_right =
+ chroma_interp_point_right - chroma_bound_right;
+ else
+ chroma_repeat_right = 0;
+
+ if (chroma_bound_top > chroma_interp_point_top)
+ chroma_repeat_top =
+ chroma_bound_top - chroma_interp_point_top;
+ else
+ chroma_repeat_top = 0;
+
+ if (chroma_interp_point_bottom > chroma_bound_bottom)
+ chroma_repeat_bottom =
+ chroma_interp_point_bottom - chroma_bound_bottom;
+ else
+ chroma_repeat_bottom = 0;
+
+ if (_is_scale_enabled && (iBuf->roi.height == 1)
+ && _is_yuv_offsite_vertical) {
+ chroma_repeat_bottom = 3;
+ chroma_repeat_top = 0;
+ }
+ }
+ /* make sure chroma repeats are non-negative */
+ if ((chroma_repeat_left < 0) || (chroma_repeat_right < 0) ||
+ (chroma_repeat_top < 0) || (chroma_repeat_bottom < 0))
+ return -1;
+
+ /* make sure chroma repeats are no larger than 3 pixels */
+ if ((chroma_repeat_left > 3) || (chroma_repeat_right > 3) ||
+ (chroma_repeat_top > 3) || (chroma_repeat_bottom > 3))
+ return -1;
+
+ /* make sure luma repeats are non-negative */
+ if ((luma_repeat_left < 0) || (luma_repeat_right < 0) ||
+ (luma_repeat_top < 0) || (luma_repeat_bottom < 0))
+ return -1;
+
+ /* make sure luma repeats are no larger than 3 pixels */
+ if ((luma_repeat_left > 3) || (luma_repeat_right > 3) ||
+ (luma_repeat_top > 3) || (luma_repeat_bottom > 3))
+ return -1;
+
+ /* write chroma_repeat_left to register */
+ reg |= (chroma_repeat_left & 3) << MDP_LEFT_CHROMA;
+
+ /* write chroma_repeat_right to register */
+ reg |= (chroma_repeat_right & 3) << MDP_RIGHT_CHROMA;
+
+ /* write chroma_repeat_top to register */
+ reg |= (chroma_repeat_top & 3) << MDP_TOP_CHROMA;
+
+ /* write chroma_repeat_bottom to register */
+ reg |= (chroma_repeat_bottom & 3) << MDP_BOTTOM_CHROMA;
+
+ /* write luma_repeat_left to register */
+ reg |= (luma_repeat_left & 3) << MDP_LEFT_LUMA;
+
+ /* write luma_repeat_right to register */
+ reg |= (luma_repeat_right & 3) << MDP_RIGHT_LUMA;
+
+ /* write luma_repeat_top to register */
+ reg |= (luma_repeat_top & 3) << MDP_TOP_LUMA;
+
+ /* write luma_repeat_bottom to register */
+ reg |= (luma_repeat_bottom & 3) << MDP_BOTTOM_LUMA;
+
+ /* done with reg */
+ *dup = reg;
+
+ /* bg edge duplicate */
+ reg = 0x0;
+
+ switch (iBuf->ibuf_type) {
+ case MDP_Y_CBCR_H2V2:
+ case MDP_Y_CRCB_H2V2:
+ /*
+ * Edge condition for MDP_Y_CRCB/CBCR_H2V2 cosite only.
+ * For 420 cosite, 1 chroma replicated on all sides except
+ * left, so reg 101b8 should be 0x0209. For 420 offsite,
+ * 1 chroma replicated all sides.
+ */
+ if (iBuf->roi.lcd_y == 0) {
+ reg |= BIT(MDP_TOP_CHROMA);
+ }
+
+ if ((iBuf->roi.lcd_y + iBuf->roi.dst_height) ==
+ iBuf->ibuf_height) {
+ reg |= BIT(MDP_BOTTOM_CHROMA);
+ }
+
+ if (((iBuf->roi.lcd_x + iBuf->roi.dst_width) ==
+ iBuf->ibuf_width) && ((iBuf->roi.dst_width % 2) == 0)) {
+ reg |= BIT(MDP_RIGHT_CHROMA);
+ }
+
+ break;
+
+ case MDP_Y_CBCR_H2V1:
+ case MDP_Y_CRCB_H2V1:
+ case MDP_YCRYCB_H2V1:
+ if (((iBuf->roi.lcd_x + iBuf->roi.dst_width) ==
+ iBuf->ibuf_width) && ((iBuf->roi.dst_width % 2) == 0)) {
+ reg |= BIT(MDP_RIGHT_CHROMA);
+ }
+ break;
+ default:
+ break;
+ }
+
+ *dup2 = reg;
+
+ return 0;
+}
+
+#define ADJUST_IP /* for 1/3 scale factor fix */
+
+static int mdp_calc_scale_params(
+/* ROI origin coordinate for the dimension */
+ uint32 org,
+/* src ROI dimension */
+ uint32 dim_in,
+/* scaled ROI dimension*/
+ uint32 dim_out,
+/* is this ROI width dimension? */
+ boolean is_W,
+/* initial phase location address */
+ int32 *phase_init_ptr,
+/* phase increment location address */
+ uint32 *phase_step_ptr,
+/* ROI start over-fetch location address */
+ uint32 *num_repl_beg_ptr,
+/* ROI end over-fetch location address */
+ uint32 *num_repl_end_ptr)
+{
+ boolean rpa_on = FALSE;
+ int init_phase = 0;
+ uint32 beg_of = 0;
+ uint32 end_of = 0;
+ uint64 numer = 0;
+ uint64 denom = 0;
+ /*uint64 inverter = 1; */
+ int64 point5 = 1;
+ int64 one = 1;
+ int64 k1, k2, k3, k4; /* linear equation coefficients */
+ uint64 int_mask;
+ uint64 fract_mask;
+ uint64 Os;
+ int64 Osprime;
+ int64 Od;
+ int64 Odprime;
+ int64 Oreq;
+ uint64 Es;
+ uint64 Ed;
+ uint64 Ereq;
+#ifdef ADJUST_IP
+ int64 IP64;
+ int64 delta;
+#endif
+ uint32 mult;
+
+ /*
+ * The phase accumulator should really be rational for all cases in a
+ * general purpose polyphase scaler for a tiled architecture with
+ * non-zero * origin capability because there is no way to represent
+ * certain scale factors in fixed point regardless of precision.
+ * The error incurred in attempting to use fixed point is most
+ * eggregious for SF where 1/SF is an integral multiple of 1/3.
+ *
+ * However, since the MDP2 has already been committed to HW, we
+ * only use the rational phase accumulator (RPA) when 1/SF is an
+ * integral multiple of 1/3. This will help minimize regressions in
+ * matching the HW to the C-Sim.
+ */
+ /*
+ * Set the RPA flag for this dimension.
+ *
+ * In order for 1/SF (dim_in/dim_out) to be an integral multiple of
+ * 1/3, dim_out must be an integral multiple of 3.
+ */
+ if (!(dim_out % 3)) {
+ mult = dim_out / 3;
+ rpa_on = (!(dim_in % mult));
+ }
+
+ numer = dim_out;
+ denom = dim_in;
+
+ /*
+ * convert to U30.34 before division
+ *
+ * The K vectors carry 4 extra bits of precision
+ * and are rounded.
+ *
+ * We initially go 5 bits over then round by adding
+ * 1 and right shifting by 1
+ * so final result is U31.33
+ */
+ numer <<= PQF_PLUS_5;
+
+ /* now calculate the scale factor (aka k3) */
+ k3 = ((mdp_do_div(numer, denom) + 1) >> 1);
+
+ /* check scale factor for legal range [0.25 - 4.0] */
+ if (((k3 >> 4) < (1LL << PQF_MINUS_2)) ||
+ ((k3 >> 4) > (1LL << PQF_PLUS_2))) {
+ return -1;
+ }
+
+ /* calculate inverse scale factor (aka k1) for phase init */
+ numer = dim_in;
+ denom = dim_out;
+ numer <<= PQF_PLUS_5;
+ k1 = ((mdp_do_div(numer, denom) + 1) >> 1);
+
+ /*
+ * calculate initial phase and ROI overfetch
+ */
+ /* convert point5 & one to S39.24 (will always be positive) */
+ point5 <<= (PQF_PLUS_4 - 1);
+ one <<= PQF_PLUS_4;
+ k2 = ((k1 - one) >> 1);
+ init_phase = (int)(k2 >> 4);
+ k4 = ((k3 - one) >> 1);
+ if (k3 == one) {
+ /* the simple case; SF = 1.0 */
+ beg_of = 1;
+ end_of = 2;
+ } else {
+ /* calculate the masks */
+ fract_mask = one - 1;
+ int_mask = ~fract_mask;
+
+ if (!rpa_on) {
+ /*
+ * FIXED POINT IMPLEMENTATION
+ */
+ if (!org) {
+ /* A fairly simple case; ROI origin = 0 */
+ if (k1 < one) {
+ /* upscaling */
+ beg_of = end_of = 2;
+ }
+ /* 0.33 <= SF < 1.0 */
+ else if (k1 < (3LL << PQF_PLUS_4))
+ beg_of = end_of = 1;
+ /* 0.33 == SF */
+ else if (k1 == (3LL << PQF_PLUS_4)) {
+ beg_of = 0;
+ end_of = 1;
+ }
+ /* 0.25 <= SF < 0.33 */
+ else
+ beg_of = end_of = 0;
+ } else {
+ /*
+ * The complicated case; ROI origin != 0
+ * init_phase needs to be adjusted
+ * OF is also position dependent
+ */
+
+ /* map (org - .5) into destination space */
+ Os = ((uint64) org << 1) - 1;
+ Od = ((k3 * Os) >> 1) + k4;
+
+ /* take the ceiling */
+ Odprime = (Od & int_mask);
+ if (Odprime != Od)
+ Odprime += one;
+
+ /* now map that back to source space */
+ Osprime = (k1 * (Odprime >> PQF_PLUS_4)) + k2;
+
+ /* then floor & decrement to calculate the required
+ starting coordinate */
+ Oreq = (Osprime & int_mask) - one;
+
+ /* calculate end coord in destination space then map to
+ source space */
+ Ed = Odprime +
+ ((uint64) dim_out << PQF_PLUS_4) - one;
+ Es = (k1 * (Ed >> PQF_PLUS_4)) + k2;
+
+ /* now floor & increment by 2 to calculate the required
+ ending coordinate */
+ Ereq = (Es & int_mask) + (one << 1);
+
+ /* calculate initial phase */
+#ifdef ADJUST_IP
+
+ IP64 = Osprime - Oreq;
+ delta = ((int64) (org) << PQF_PLUS_4) - Oreq;
+ IP64 -= delta;
+
+ /* limit to valid range before the left shift */
+ delta = (IP64 & (1LL << 63)) ? 4 : -4;
+ delta <<= PQF_PLUS_4;
+ while (abs((int)(IP64 >> PQF_PLUS_4)) > 4)
+ IP64 += delta;
+
+ /* right shift to account for extra bits of precision */
+ init_phase = (int)(IP64 >> 4);
+
+#else /* ADJUST_IP */
+
+ /* just calculate the real initial phase */
+ init_phase = (int)((Osprime - Oreq) >> 4);
+
+#endif /* ADJUST_IP */
+
+ /* calculate the overfetch */
+ beg_of = org - (uint32) (Oreq >> PQF_PLUS_4);
+ end_of =
+ (uint32) (Ereq >> PQF_PLUS_4) - (org +
+ dim_in -
+ 1);
+ }
+ } else {
+ /*
+ * RPA IMPLEMENTATION
+ *
+ * init_phase needs to be calculated in all RPA_on cases
+ * because it's a numerator, not a fixed point value.
+ */
+
+ /* map (org - .5) into destination space */
+ Os = ((uint64) org << PQF_PLUS_4) - point5;
+ Od = mdp_do_div((dim_out * (Os + point5)),
+ dim_in) - point5;
+
+ /* take the ceiling */
+ Odprime = (Od & int_mask);
+ if (Odprime != Od)
+ Odprime += one;
+
+ /* now map that back to source space */
+ Osprime =
+ mdp_do_div((dim_in * (Odprime + point5)),
+ dim_out) - point5;
+
+ /* then floor & decrement to calculate the required
+ starting coordinate */
+ Oreq = (Osprime & int_mask) - one;
+
+ /* calculate end coord in destination space then map to
+ source space */
+ Ed = Odprime + ((uint64) dim_out << PQF_PLUS_4) - one;
+ Es = mdp_do_div((dim_in * (Ed + point5)),
+ dim_out) - point5;
+
+ /* now floor & increment by 2 to calculate the required
+ ending coordinate */
+ Ereq = (Es & int_mask) + (one << 1);
+
+ /* calculate initial phase */
+
+#ifdef ADJUST_IP
+
+ IP64 = Osprime - Oreq;
+ delta = ((int64) (org) << PQF_PLUS_4) - Oreq;
+ IP64 -= delta;
+
+ /* limit to valid range before the left shift */
+ delta = (IP64 & (1LL << 63)) ? 4 : -4;
+ delta <<= PQF_PLUS_4;
+ while (abs((int)(IP64 >> PQF_PLUS_4)) > 4)
+ IP64 += delta;
+
+ /* right shift to account for extra bits of precision */
+ init_phase = (int)(IP64 >> 4);
+
+#else /* ADJUST_IP */
+
+ /* just calculate the real initial phase */
+ init_phase = (int)((Osprime - Oreq) >> 4);
+
+#endif /* ADJUST_IP */
+
+ /* calculate the overfetch */
+ beg_of = org - (uint32) (Oreq >> PQF_PLUS_4);
+ end_of =
+ (uint32) (Ereq >> PQF_PLUS_4) - (org + dim_in - 1);
+ }
+ }
+
+ /* return the scale parameters */
+ *phase_init_ptr = init_phase;
+ *phase_step_ptr = (uint32) (k1 >> 4);
+ *num_repl_beg_ptr = beg_of;
+ *num_repl_end_ptr = end_of;
+
+ return 0;
+}
+
+static uint8 *mdp_adjust_rot_addr(MDPIBUF *iBuf, uint8 *addr, uint32 uv)
+{
+ uint32 dest_ystride = iBuf->ibuf_width * iBuf->bpp;
+ uint32 h_slice = 1;
+
+ if (uv && ((iBuf->ibuf_type == MDP_Y_CBCR_H2V2) ||
+ (iBuf->ibuf_type == MDP_Y_CRCB_H2V2)))
+ h_slice = 2;
+
+ if (MDP_CHKBIT(iBuf->mdpImg.mdpOp, MDPOP_ROT90) ^
+ MDP_CHKBIT(iBuf->mdpImg.mdpOp, MDPOP_LR)) {
+ addr =
+ addr + (iBuf->roi.dst_width -
+ MIN(16, iBuf->roi.dst_width)) * iBuf->bpp;
+ }
+ if (MDP_CHKBIT(iBuf->mdpImg.mdpOp, MDPOP_UD)) {
+ addr =
+ addr + ((iBuf->roi.dst_height -
+ MIN(16, iBuf->roi.dst_height))/h_slice) * dest_ystride;
+ }
+
+ return addr;
+}
+
+void mdp_set_scale(MDPIBUF *iBuf,
+ uint32 dst_roi_width,
+ uint32 dst_roi_height,
+ boolean inputRGB, boolean outputRGB, uint32 *pppop_reg_ptr)
+{
+ uint32 dst_roi_width_scale;
+ uint32 dst_roi_height_scale;
+ boolean use_pr;
+ uint32 phasex_step = 0;
+ uint32 phasey_step = 0;
+ int32 phasex_init = 0;
+ int32 phasey_init = 0;
+ uint32 lines_dup = 0;
+ uint32 lines_dup_bg = 0;
+ uint32 dummy;
+ uint32 mdp_blur = 0;
+
+ if (iBuf->mdpImg.mdpOp & MDPOP_ASCALE) {
+ if (iBuf->mdpImg.mdpOp & MDPOP_ROT90) {
+ dst_roi_width_scale = dst_roi_height;
+ dst_roi_height_scale = dst_roi_width;
+ } else {
+ dst_roi_width_scale = dst_roi_width;
+ dst_roi_height_scale = dst_roi_height;
+ }
+
+ mdp_blur = iBuf->mdpImg.mdpOp & MDPOP_BLUR;
+
+ if ((dst_roi_width_scale != iBuf->roi.width) ||
+ (dst_roi_height_scale != iBuf->roi.height) ||
+ mdp_blur) {
+ *pppop_reg_ptr |=
+ (PPP_OP_SCALE_Y_ON | PPP_OP_SCALE_X_ON);
+
+ /* let's use SHIM logic to calculate the partial ROI scaling */
+#if 0
+ phasex_step =
+ (uint32) mdp_do_div(0x20000000 * iBuf->roi.width,
+ dst_roi_width_scale);
+ phasey_step =
+ (uint32) mdp_do_div(0x20000000 * iBuf->roi.height,
+ dst_roi_height_scale);
+
+/*
+ phasex_step= ((long long) iBuf->roi.width * 0x20000000)/dst_roi_width_scale;
+ phasey_step= ((long long)iBuf->roi.height * 0x20000000)/dst_roi_height_scale;
+*/
+
+ phasex_init =
+ (((long long)phasex_step - 0x20000000) >> 1);
+ phasey_init =
+ (((long long)phasey_step - 0x20000000) >> 1);
+
+#else
+ mdp_calc_scale_params(iBuf->roi.x, iBuf->roi.width,
+ dst_roi_width_scale, 1,
+ &phasex_init, &phasex_step,
+ &dummy, &dummy);
+ mdp_calc_scale_params(iBuf->roi.y, iBuf->roi.height,
+ dst_roi_height_scale, 0,
+ &phasey_init, &phasey_step,
+ &dummy, &dummy);
+#endif
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x013c,
+ phasex_init);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0140,
+ phasey_init);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0144,
+ phasex_step);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0148,
+ phasey_step);
+
+ use_pr = (inputRGB) && (outputRGB);
+
+ if ((dst_roi_width_scale > iBuf->roi.width) ||
+ (dst_roi_height_scale > iBuf->roi.height)) {
+ if ((use_pr)
+ && (mdp_curr_up_scale_xy !=
+ MDP_PR_SCALE_UP)) {
+ mdp_load_pr_upscale_table();
+ mdp_curr_up_scale_xy = MDP_PR_SCALE_UP;
+ } else if ((!use_pr)
+ && (mdp_curr_up_scale_xy !=
+ MDP_BC_SCALE_UP)) {
+ mdp_load_bc_upscale_table();
+ mdp_curr_up_scale_xy = MDP_BC_SCALE_UP;
+ }
+ }
+
+ if (mdp_blur) {
+ load_scale_table(mdp_gaussian_blur_table,
+ ARRAY_SIZE(mdp_gaussian_blur_table));
+ mdp_curr_down_scale_x = MDP_SCALE_BLUR;
+ mdp_curr_down_scale_y = MDP_SCALE_BLUR;
+ }
+
+ /* 0.2 < x <= 1 scaling factor */
+ if ((dst_roi_width_scale <= iBuf->roi.width) &&
+ !mdp_blur) {
+ if (((dst_roi_width_scale * 10) /
+ iBuf->roi.width) > 8) {
+ if ((use_pr)
+ && (mdp_curr_down_scale_x !=
+ MDP_PR_SCALE_POINT8_1)) {
+ mdp_load_pr_downscale_table_x_point8TO1
+ ();
+ mdp_curr_down_scale_x =
+ MDP_PR_SCALE_POINT8_1;
+ } else if ((!use_pr)
+ && (mdp_curr_down_scale_x !=
+ MDP_BC_SCALE_POINT8_1)) {
+ mdp_load_bc_downscale_table_x_point8TO1
+ ();
+ mdp_curr_down_scale_x =
+ MDP_BC_SCALE_POINT8_1;
+ }
+ } else
+ if (((dst_roi_width_scale * 10) /
+ iBuf->roi.width) > 6) {
+ if ((use_pr)
+ && (mdp_curr_down_scale_x !=
+ MDP_PR_SCALE_POINT6_POINT8)) {
+ mdp_load_pr_downscale_table_x_point6TOpoint8
+ ();
+ mdp_curr_down_scale_x =
+ MDP_PR_SCALE_POINT6_POINT8;
+ } else if ((!use_pr)
+ && (mdp_curr_down_scale_x !=
+ MDP_BC_SCALE_POINT6_POINT8))
+ {
+ mdp_load_bc_downscale_table_x_point6TOpoint8
+ ();
+ mdp_curr_down_scale_x =
+ MDP_BC_SCALE_POINT6_POINT8;
+ }
+ } else
+ if (((dst_roi_width_scale * 10) /
+ iBuf->roi.width) > 4) {
+ if ((use_pr)
+ && (mdp_curr_down_scale_x !=
+ MDP_PR_SCALE_POINT4_POINT6)) {
+ mdp_load_pr_downscale_table_x_point4TOpoint6
+ ();
+ mdp_curr_down_scale_x =
+ MDP_PR_SCALE_POINT4_POINT6;
+ } else if ((!use_pr)
+ && (mdp_curr_down_scale_x !=
+ MDP_BC_SCALE_POINT4_POINT6))
+ {
+ mdp_load_bc_downscale_table_x_point4TOpoint6
+ ();
+ mdp_curr_down_scale_x =
+ MDP_BC_SCALE_POINT4_POINT6;
+ }
+ } else {
+ if ((use_pr)
+ && (mdp_curr_down_scale_x !=
+ MDP_PR_SCALE_POINT2_POINT4)) {
+ mdp_load_pr_downscale_table_x_point2TOpoint4
+ ();
+ mdp_curr_down_scale_x =
+ MDP_PR_SCALE_POINT2_POINT4;
+ } else if ((!use_pr)
+ && (mdp_curr_down_scale_x !=
+ MDP_BC_SCALE_POINT2_POINT4))
+ {
+ mdp_load_bc_downscale_table_x_point2TOpoint4
+ ();
+ mdp_curr_down_scale_x =
+ MDP_BC_SCALE_POINT2_POINT4;
+ }
+ }
+ }
+ /* 0.2 < y <= 1 scaling factor */
+ if ((dst_roi_height_scale <= iBuf->roi.height) &&
+ !mdp_blur) {
+ if (((dst_roi_height_scale * 10) /
+ iBuf->roi.height) > 8) {
+ if ((use_pr)
+ && (mdp_curr_down_scale_y !=
+ MDP_PR_SCALE_POINT8_1)) {
+ mdp_load_pr_downscale_table_y_point8TO1
+ ();
+ mdp_curr_down_scale_y =
+ MDP_PR_SCALE_POINT8_1;
+ } else if ((!use_pr)
+ && (mdp_curr_down_scale_y !=
+ MDP_BC_SCALE_POINT8_1)) {
+ mdp_load_bc_downscale_table_y_point8TO1
+ ();
+ mdp_curr_down_scale_y =
+ MDP_BC_SCALE_POINT8_1;
+ }
+ } else
+ if (((dst_roi_height_scale * 10) /
+ iBuf->roi.height) > 6) {
+ if ((use_pr)
+ && (mdp_curr_down_scale_y !=
+ MDP_PR_SCALE_POINT6_POINT8)) {
+ mdp_load_pr_downscale_table_y_point6TOpoint8
+ ();
+ mdp_curr_down_scale_y =
+ MDP_PR_SCALE_POINT6_POINT8;
+ } else if ((!use_pr)
+ && (mdp_curr_down_scale_y !=
+ MDP_BC_SCALE_POINT6_POINT8))
+ {
+ mdp_load_bc_downscale_table_y_point6TOpoint8
+ ();
+ mdp_curr_down_scale_y =
+ MDP_BC_SCALE_POINT6_POINT8;
+ }
+ } else
+ if (((dst_roi_height_scale * 10) /
+ iBuf->roi.height) > 4) {
+ if ((use_pr)
+ && (mdp_curr_down_scale_y !=
+ MDP_PR_SCALE_POINT4_POINT6)) {
+ mdp_load_pr_downscale_table_y_point4TOpoint6
+ ();
+ mdp_curr_down_scale_y =
+ MDP_PR_SCALE_POINT4_POINT6;
+ } else if ((!use_pr)
+ && (mdp_curr_down_scale_y !=
+ MDP_BC_SCALE_POINT4_POINT6))
+ {
+ mdp_load_bc_downscale_table_y_point4TOpoint6
+ ();
+ mdp_curr_down_scale_y =
+ MDP_BC_SCALE_POINT4_POINT6;
+ }
+ } else {
+ if ((use_pr)
+ && (mdp_curr_down_scale_y !=
+ MDP_PR_SCALE_POINT2_POINT4)) {
+ mdp_load_pr_downscale_table_y_point2TOpoint4
+ ();
+ mdp_curr_down_scale_y =
+ MDP_PR_SCALE_POINT2_POINT4;
+ } else if ((!use_pr)
+ && (mdp_curr_down_scale_y !=
+ MDP_BC_SCALE_POINT2_POINT4))
+ {
+ mdp_load_bc_downscale_table_y_point2TOpoint4
+ ();
+ mdp_curr_down_scale_y =
+ MDP_BC_SCALE_POINT2_POINT4;
+ }
+ }
+ }
+ } else {
+ iBuf->mdpImg.mdpOp &= ~(MDPOP_ASCALE);
+ }
+ }
+ /* setting edge condition here after scaling check */
+ if (mdp_get_edge_cond(iBuf, &lines_dup, &lines_dup_bg))
+ printk(KERN_ERR "msm_fb: mdp_get_edge_cond() error!\n");
+
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01b8, lines_dup);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01bc, lines_dup_bg);
+}
+
+void mdp_init_scale_table(void)
+{
+ mdp_curr_up_scale_xy = MDP_INIT_SCALE;
+ mdp_curr_down_scale_x = MDP_INIT_SCALE;
+ mdp_curr_down_scale_y = MDP_INIT_SCALE;
+}
+
+void mdp_adjust_start_addr(uint8 **src0,
+ uint8 **src1,
+ int v_slice,
+ int h_slice,
+ int x,
+ int y,
+ uint32 width,
+ uint32 height, int bpp, MDPIBUF *iBuf, int layer)
+{
+ *src0 += (x + y * width) * bpp;
+
+ /* if it's dest/bg buffer, we need to adjust it for rotation */
+ if (layer != 0)
+ *src0 = mdp_adjust_rot_addr(iBuf, *src0, 0);
+
+ if (*src1) {
+ /*
+ * MDP_Y_CBCR_H2V2/MDP_Y_CRCB_H2V2 cosite for now
+ * we need to shift x direction same as y dir for offsite
+ */
+ *src1 +=
+ ((x / h_slice) * h_slice +
+ ((y == 0) ? 0 : ((y + 1) / v_slice - 1) * width)) * bpp;
+
+ /* if it's dest/bg buffer, we need to adjust it for rotation */
+ if (layer != 0)
+ *src1 = mdp_adjust_rot_addr(iBuf, *src1, 1);
+ }
+}
+
+void mdp_set_blend_attr(MDPIBUF *iBuf,
+ uint32 *alpha,
+ uint32 *tpVal,
+ uint32 perPixelAlpha, uint32 *pppop_reg_ptr)
+{
+ if (perPixelAlpha) {
+ *pppop_reg_ptr |= PPP_OP_ROT_ON |
+ PPP_OP_BLEND_ON | PPP_OP_BLEND_SRCPIXEL_ALPHA;
+ } else {
+ if ((iBuf->mdpImg.mdpOp & MDPOP_ALPHAB)
+ && (iBuf->mdpImg.alpha == 0xff)) {
+ iBuf->mdpImg.mdpOp &= ~(MDPOP_ALPHAB);
+ }
+
+ if ((iBuf->mdpImg.mdpOp & MDPOP_ALPHAB)
+ && (iBuf->mdpImg.mdpOp & MDPOP_TRANSP)) {
+ *pppop_reg_ptr |=
+ PPP_OP_ROT_ON | PPP_OP_BLEND_ON |
+ PPP_OP_BLEND_CONSTANT_ALPHA |
+ PPP_OP_BLEND_ALPHA_BLEND_NORMAL |
+ PPP_BLEND_CALPHA_TRNASP;
+
+ *alpha = iBuf->mdpImg.alpha;
+ *tpVal = iBuf->mdpImg.tpVal;
+ } else {
+ if (iBuf->mdpImg.mdpOp & MDPOP_TRANSP) {
+ *pppop_reg_ptr |= PPP_OP_ROT_ON |
+ PPP_OP_BLEND_ON |
+ PPP_OP_BLEND_SRCPIXEL_TRANSP;
+ *tpVal = iBuf->mdpImg.tpVal;
+ } else if (iBuf->mdpImg.mdpOp & MDPOP_ALPHAB) {
+ *pppop_reg_ptr |= PPP_OP_ROT_ON |
+ PPP_OP_BLEND_ON |
+ PPP_OP_BLEND_ALPHA_BLEND_NORMAL |
+ PPP_OP_BLEND_CONSTANT_ALPHA;
+ *alpha = iBuf->mdpImg.alpha;
+ }
+ }
+ }
+}
diff --git a/drivers/staging/msm/mdp_ppp_v31.c b/drivers/staging/msm/mdp_ppp_v31.c
new file mode 100644
index 0000000..76495db
--- /dev/null
+++ b/drivers/staging/msm/mdp_ppp_v31.c
@@ -0,0 +1,828 @@
+/* Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include "linux/proc_fs.h"
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <asm/div64.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+
+#define MDP_SCALE_COEFF_NUM 32
+#define MDP_SCALE_0P2_TO_0P4_INDEX 0
+#define MDP_SCALE_0P4_TO_0P6_INDEX 32
+#define MDP_SCALE_0P6_TO_0P8_INDEX 64
+#define MDP_SCALE_0P8_TO_8P0_INDEX 96
+#define MDP_SCALE_COEFF_MASK 0x3ff
+
+#define MDP_SCALE_PR 0
+#define MDP_SCALE_FIR 1
+
+static uint32 mdp_scale_0p8_to_8p0_mode;
+static uint32 mdp_scale_0p6_to_0p8_mode;
+static uint32 mdp_scale_0p4_to_0p6_mode;
+static uint32 mdp_scale_0p2_to_0p4_mode;
+
+/* -------- All scaling range, "pixel repeat" -------- */
+static int16 mdp_scale_pixel_repeat_C0[MDP_SCALE_COEFF_NUM] = {
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0
+};
+
+static int16 mdp_scale_pixel_repeat_C1[MDP_SCALE_COEFF_NUM] = {
+ 511, 511, 511, 511, 511, 511, 511, 511,
+ 511, 511, 511, 511, 511, 511, 511, 511,
+ 511, 511, 511, 511, 511, 511, 511, 511,
+ 511, 511, 511, 511, 511, 511, 511, 511
+};
+
+static int16 mdp_scale_pixel_repeat_C2[MDP_SCALE_COEFF_NUM] = {
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0
+};
+
+static int16 mdp_scale_pixel_repeat_C3[MDP_SCALE_COEFF_NUM] = {
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0
+};
+
+/* --------------------------- FIR ------------------------------------- */
+/* -------- Downscale, ranging from 0.8x to 8.0x of original size -------- */
+
+static int16 mdp_scale_0p8_to_8p0_C0[MDP_SCALE_COEFF_NUM] = {
+ 0, -7, -13, -19, -24, -28, -32, -34, -37, -39,
+ -40, -41, -41, -41, -40, -40, -38, -37, -35, -33,
+ -31, -29, -26, -24, -21, -18, -15, -13, -10, -7,
+ -5, -2
+};
+
+static int16 mdp_scale_0p8_to_8p0_C1[MDP_SCALE_COEFF_NUM] = {
+ 511, 507, 501, 494, 485, 475, 463, 450, 436, 422,
+ 405, 388, 370, 352, 333, 314, 293, 274, 253, 233,
+ 213, 193, 172, 152, 133, 113, 95, 77, 60, 43,
+ 28, 13
+};
+
+static int16 mdp_scale_0p8_to_8p0_C2[MDP_SCALE_COEFF_NUM] = {
+ 0, 13, 28, 43, 60, 77, 95, 113, 133, 152,
+ 172, 193, 213, 233, 253, 274, 294, 314, 333, 352,
+ 370, 388, 405, 422, 436, 450, 463, 475, 485, 494,
+ 501, 507,
+};
+
+static int16 mdp_scale_0p8_to_8p0_C3[MDP_SCALE_COEFF_NUM] = {
+ 0, -2, -5, -7, -10, -13, -15, -18, -21, -24,
+ -26, -29, -31, -33, -35, -37, -38, -40, -40, -41,
+ -41, -41, -40, -39, -37, -34, -32, -28, -24, -19,
+ -13, -7
+};
+
+/* -------- Downscale, ranging from 0.6x to 0.8x of original size -------- */
+
+static int16 mdp_scale_0p6_to_0p8_C0[MDP_SCALE_COEFF_NUM] = {
+ 104, 96, 89, 82, 75, 68, 61, 55, 49, 43,
+ 38, 33, 28, 24, 20, 16, 12, 9, 6, 4,
+ 2, 0, -2, -4, -5, -6, -7, -7, -8, -8,
+ -8, -8
+};
+
+static int16 mdp_scale_0p6_to_0p8_C1[MDP_SCALE_COEFF_NUM] = {
+ 303, 303, 302, 300, 298, 296, 293, 289, 286, 281,
+ 276, 270, 265, 258, 252, 245, 238, 230, 223, 214,
+ 206, 197, 189, 180, 172, 163, 154, 145, 137, 128,
+ 120, 112
+};
+
+static int16 mdp_scale_0p6_to_0p8_C2[MDP_SCALE_COEFF_NUM] = {
+ 112, 120, 128, 137, 145, 154, 163, 172, 180, 189,
+ 197, 206, 214, 223, 230, 238, 245, 252, 258, 265,
+ 270, 276, 281, 286, 289, 293, 296, 298, 300, 302,
+ 303, 303
+};
+
+static int16 mdp_scale_0p6_to_0p8_C3[MDP_SCALE_COEFF_NUM] = {
+ -8, -8, -8, -8, -7, -7, -6, -5, -4, -2,
+ 0, 2, 4, 6, 9, 12, 16, 20, 24, 28,
+ 33, 38, 43, 49, 55, 61, 68, 75, 82, 89,
+ 96, 104
+};
+
+/* -------- Downscale, ranging from 0.4x to 0.6x of original size -------- */
+
+static int16 mdp_scale_0p4_to_0p6_C0[MDP_SCALE_COEFF_NUM] = {
+ 136, 132, 128, 123, 119, 115, 111, 107, 103, 98,
+ 95, 91, 87, 84, 80, 76, 73, 69, 66, 62,
+ 59, 57, 54, 50, 47, 44, 41, 39, 36, 33,
+ 32, 29
+};
+
+static int16 mdp_scale_0p4_to_0p6_C1[MDP_SCALE_COEFF_NUM] = {
+ 206, 205, 204, 204, 201, 200, 199, 197, 196, 194,
+ 191, 191, 189, 185, 184, 182, 180, 178, 176, 173,
+ 170, 168, 165, 162, 160, 157, 155, 152, 148, 146,
+ 142, 140
+};
+
+static int16 mdp_scale_0p4_to_0p6_C2[MDP_SCALE_COEFF_NUM] = {
+ 140, 142, 146, 148, 152, 155, 157, 160, 162, 165,
+ 168, 170, 173, 176, 178, 180, 182, 184, 185, 189,
+ 191, 191, 194, 196, 197, 199, 200, 201, 204, 204,
+ 205, 206
+};
+
+static int16 mdp_scale_0p4_to_0p6_C3[MDP_SCALE_COEFF_NUM] = {
+ 29, 32, 33, 36, 39, 41, 44, 47, 50, 54,
+ 57, 59, 62, 66, 69, 73, 76, 80, 84, 87,
+ 91, 95, 98, 103, 107, 111, 115, 119, 123, 128,
+ 132, 136
+};
+
+/* -------- Downscale, ranging from 0.2x to 0.4x of original size -------- */
+
+static int16 mdp_scale_0p2_to_0p4_C0[MDP_SCALE_COEFF_NUM] = {
+ 131, 131, 130, 129, 128, 127, 127, 126, 125, 125,
+ 124, 123, 123, 121, 120, 119, 119, 118, 117, 117,
+ 116, 115, 115, 114, 113, 112, 111, 110, 109, 109,
+ 108, 107
+};
+
+static int16 mdp_scale_0p2_to_0p4_C1[MDP_SCALE_COEFF_NUM] = {
+ 141, 140, 140, 140, 140, 139, 138, 138, 138, 137,
+ 137, 137, 136, 137, 137, 137, 136, 136, 136, 135,
+ 135, 135, 134, 134, 134, 134, 134, 133, 133, 132,
+ 132, 132
+};
+
+static int16 mdp_scale_0p2_to_0p4_C2[MDP_SCALE_COEFF_NUM] = {
+ 132, 132, 132, 133, 133, 134, 134, 134, 134, 134,
+ 135, 135, 135, 136, 136, 136, 137, 137, 137, 136,
+ 137, 137, 137, 138, 138, 138, 139, 140, 140, 140,
+ 140, 141
+};
+
+static int16 mdp_scale_0p2_to_0p4_C3[MDP_SCALE_COEFF_NUM] = {
+ 107, 108, 109, 109, 110, 111, 112, 113, 114, 115,
+ 115, 116, 117, 117, 118, 119, 119, 120, 121, 123,
+ 123, 124, 125, 125, 126, 127, 127, 128, 129, 130,
+ 131, 131
+};
+
+static void mdp_update_scale_table(int index, int16 *c0, int16 *c1,
+ int16 *c2, int16 *c3)
+{
+ int i, val;
+
+ for (i = 0; i < MDP_SCALE_COEFF_NUM; i++) {
+ val =
+ ((MDP_SCALE_COEFF_MASK & c1[i]) << 16) |
+ (MDP_SCALE_COEFF_MASK & c0[i]);
+ MDP_OUTP(MDP_PPP_SCALE_COEFF_LSBn(index), val);
+ val =
+ ((MDP_SCALE_COEFF_MASK & c3[i]) << 16) |
+ (MDP_SCALE_COEFF_MASK & c2[i]);
+ MDP_OUTP(MDP_PPP_SCALE_COEFF_MSBn(index), val);
+ index++;
+ }
+}
+
+void mdp_init_scale_table(void)
+{
+ mdp_scale_0p2_to_0p4_mode = MDP_SCALE_FIR;
+ mdp_update_scale_table(MDP_SCALE_0P2_TO_0P4_INDEX,
+ mdp_scale_0p2_to_0p4_C0,
+ mdp_scale_0p2_to_0p4_C1,
+ mdp_scale_0p2_to_0p4_C2,
+ mdp_scale_0p2_to_0p4_C3);
+
+ mdp_scale_0p4_to_0p6_mode = MDP_SCALE_FIR;
+ mdp_update_scale_table(MDP_SCALE_0P4_TO_0P6_INDEX,
+ mdp_scale_0p4_to_0p6_C0,
+ mdp_scale_0p4_to_0p6_C1,
+ mdp_scale_0p4_to_0p6_C2,
+ mdp_scale_0p4_to_0p6_C3);
+
+ mdp_scale_0p6_to_0p8_mode = MDP_SCALE_FIR;
+ mdp_update_scale_table(MDP_SCALE_0P6_TO_0P8_INDEX,
+ mdp_scale_0p6_to_0p8_C0,
+ mdp_scale_0p6_to_0p8_C1,
+ mdp_scale_0p6_to_0p8_C2,
+ mdp_scale_0p6_to_0p8_C3);
+
+ mdp_scale_0p8_to_8p0_mode = MDP_SCALE_FIR;
+ mdp_update_scale_table(MDP_SCALE_0P8_TO_8P0_INDEX,
+ mdp_scale_0p8_to_8p0_C0,
+ mdp_scale_0p8_to_8p0_C1,
+ mdp_scale_0p8_to_8p0_C2,
+ mdp_scale_0p8_to_8p0_C3);
+}
+
+static long long mdp_do_div(long long num, long long den)
+{
+ do_div(num, den);
+ return num;
+}
+
+#define SCALER_PHASE_BITS 29
+#define HAL_MDP_PHASE_STEP_2P50 0x50000000
+#define HAL_MDP_PHASE_STEP_1P66 0x35555555
+#define HAL_MDP_PHASE_STEP_1P25 0x28000000
+
+struct phase_val {
+ int phase_init_x;
+ int phase_init_y;
+ int phase_step_x;
+ int phase_step_y;
+};
+
+static void mdp_calc_scaleInitPhase_3p1(uint32 in_w,
+ uint32 in_h,
+ uint32 out_w,
+ uint32 out_h,
+ boolean is_rotate,
+ boolean is_pp_x,
+ boolean is_pp_y, struct phase_val *pval)
+{
+ uint64 dst_ROI_width;
+ uint64 dst_ROI_height;
+ uint64 src_ROI_width;
+ uint64 src_ROI_height;
+
+ /*
+ * phase_step_x, phase_step_y, phase_init_x and phase_init_y
+ * are represented in fixed-point, unsigned 3.29 format
+ */
+ uint32 phase_step_x = 0;
+ uint32 phase_step_y = 0;
+ uint32 phase_init_x = 0;
+ uint32 phase_init_y = 0;
+ uint32 yscale_filter_sel, xscale_filter_sel;
+ uint32 scale_unit_sel_x, scale_unit_sel_y;
+
+ uint64 numerator, denominator;
+ uint64 temp_dim;
+
+ src_ROI_width = in_w;
+ src_ROI_height = in_h;
+ dst_ROI_width = out_w;
+ dst_ROI_height = out_h;
+
+ /* if there is a 90 degree rotation */
+ if (is_rotate) {
+ /* decide whether to use FIR or M/N for scaling */
+
+ /* if down-scaling by a factor smaller than 1/4 */
+ if (src_ROI_width > (4 * dst_ROI_height))
+ scale_unit_sel_x = 1; /* use M/N scalar */
+ else
+ scale_unit_sel_x = 0; /* use FIR scalar */
+
+ /* if down-scaling by a factor smaller than 1/4 */
+ if (src_ROI_height > (4 * dst_ROI_width))
+ scale_unit_sel_y = 1; /* use M/N scalar */
+ else
+ scale_unit_sel_y = 0; /* use FIR scalar */
+ } else {
+ /* decide whether to use FIR or M/N for scaling */
+
+ if (src_ROI_width > (4 * dst_ROI_width))
+ scale_unit_sel_x = 1; /* use M/N scalar */
+ else
+ scale_unit_sel_x = 0; /* use FIR scalar */
+
+ if (src_ROI_height > (4 * dst_ROI_height))
+ scale_unit_sel_y = 1; /* use M/N scalar */
+ else
+ scale_unit_sel_y = 0; /* use FIR scalar */
+
+ }
+
+ /* if there is a 90 degree rotation */
+ if (is_rotate) {
+ /* swap the width and height of dst ROI */
+ temp_dim = dst_ROI_width;
+ dst_ROI_width = dst_ROI_height;
+ dst_ROI_height = temp_dim;
+ }
+
+ /* calculate phase step for the x direction */
+
+ /* if destination is only 1 pixel wide, the value of phase_step_x
+ is unimportant. Assigning phase_step_x to src ROI width
+ as an arbitrary value. */
+ if (dst_ROI_width == 1)
+ phase_step_x = (uint32) ((src_ROI_width) << SCALER_PHASE_BITS);
+
+ /* if using FIR scalar */
+ else if (scale_unit_sel_x == 0) {
+
+ /* Calculate the quotient ( src_ROI_width - 1 ) / ( dst_ROI_width - 1)
+ with u3.29 precision. Quotient is rounded up to the larger
+ 29th decimal point. */
+ numerator = (src_ROI_width - 1) << SCALER_PHASE_BITS;
+ denominator = (dst_ROI_width - 1); /* never equals to 0 because of the "( dst_ROI_width == 1 ) case" */
+ phase_step_x = (uint32) mdp_do_div((numerator + denominator - 1), denominator); /* divide and round up to the larger 29th decimal point. */
+
+ }
+
+ /* if M/N scalar */
+ else if (scale_unit_sel_x == 1) {
+ /* Calculate the quotient ( src_ROI_width ) / ( dst_ROI_width)
+ with u3.29 precision. Quotient is rounded down to the
+ smaller 29th decimal point. */
+ numerator = (src_ROI_width) << SCALER_PHASE_BITS;
+ denominator = (dst_ROI_width);
+ phase_step_x = (uint32) mdp_do_div(numerator, denominator);
+ }
+ /* calculate phase step for the y direction */
+
+ /* if destination is only 1 pixel wide, the value of
+ phase_step_x is unimportant. Assigning phase_step_x
+ to src ROI width as an arbitrary value. */
+ if (dst_ROI_height == 1)
+ phase_step_y = (uint32) ((src_ROI_height) << SCALER_PHASE_BITS);
+
+ /* if FIR scalar */
+ else if (scale_unit_sel_y == 0) {
+ /* Calculate the quotient ( src_ROI_height - 1 ) / ( dst_ROI_height - 1)
+ with u3.29 precision. Quotient is rounded up to the larger
+ 29th decimal point. */
+ numerator = (src_ROI_height - 1) << SCALER_PHASE_BITS;
+ denominator = (dst_ROI_height - 1); /* never equals to 0 because of the "( dst_ROI_height == 1 )" case */
+ phase_step_y = (uint32) mdp_do_div((numerator + denominator - 1), denominator); /* Quotient is rounded up to the larger 29th decimal point. */
+
+ }
+
+ /* if M/N scalar */
+ else if (scale_unit_sel_y == 1) {
+ /* Calculate the quotient ( src_ROI_height ) / ( dst_ROI_height)
+ with u3.29 precision. Quotient is rounded down to the smaller
+ 29th decimal point. */
+ numerator = (src_ROI_height) << SCALER_PHASE_BITS;
+ denominator = (dst_ROI_height);
+ phase_step_y = (uint32) mdp_do_div(numerator, denominator);
+ }
+
+ /* decide which set of FIR coefficients to use */
+ if (phase_step_x > HAL_MDP_PHASE_STEP_2P50)
+ xscale_filter_sel = 0;
+ else if (phase_step_x > HAL_MDP_PHASE_STEP_1P66)
+ xscale_filter_sel = 1;
+ else if (phase_step_x > HAL_MDP_PHASE_STEP_1P25)
+ xscale_filter_sel = 2;
+ else
+ xscale_filter_sel = 3;
+
+ if (phase_step_y > HAL_MDP_PHASE_STEP_2P50)
+ yscale_filter_sel = 0;
+ else if (phase_step_y > HAL_MDP_PHASE_STEP_1P66)
+ yscale_filter_sel = 1;
+ else if (phase_step_y > HAL_MDP_PHASE_STEP_1P25)
+ yscale_filter_sel = 2;
+ else
+ yscale_filter_sel = 3;
+
+ /* calculate phase init for the x direction */
+
+ /* if using FIR scalar */
+ if (scale_unit_sel_x == 0) {
+ if (dst_ROI_width == 1)
+ phase_init_x =
+ (uint32) ((src_ROI_width - 1) << SCALER_PHASE_BITS);
+ else
+ phase_init_x = 0;
+
+ }
+ /* M over N scalar */
+ else if (scale_unit_sel_x == 1)
+ phase_init_x = 0;
+
+ /* calculate phase init for the y direction
+ if using FIR scalar */
+ if (scale_unit_sel_y == 0) {
+ if (dst_ROI_height == 1)
+ phase_init_y =
+ (uint32) ((src_ROI_height -
+ 1) << SCALER_PHASE_BITS);
+ else
+ phase_init_y = 0;
+
+ }
+ /* M over N scalar */
+ else if (scale_unit_sel_y == 1)
+ phase_init_y = 0;
+
+ /* write registers */
+ pval->phase_step_x = (uint32) phase_step_x;
+ pval->phase_step_y = (uint32) phase_step_y;
+ pval->phase_init_x = (uint32) phase_init_x;
+ pval->phase_init_y = (uint32) phase_init_y;
+
+ return;
+}
+
+void mdp_set_scale(MDPIBUF *iBuf,
+ uint32 dst_roi_width,
+ uint32 dst_roi_height,
+ boolean inputRGB, boolean outputRGB, uint32 *pppop_reg_ptr)
+{
+ uint32 dst_roi_width_scale;
+ uint32 dst_roi_height_scale;
+ struct phase_val pval;
+ boolean use_pr;
+ uint32 ppp_scale_config = 0;
+
+ if (!inputRGB)
+ ppp_scale_config |= BIT(6);
+
+ if (iBuf->mdpImg.mdpOp & MDPOP_ASCALE) {
+ if (iBuf->mdpImg.mdpOp & MDPOP_ROT90) {
+ dst_roi_width_scale = dst_roi_height;
+ dst_roi_height_scale = dst_roi_width;
+ } else {
+ dst_roi_width_scale = dst_roi_width;
+ dst_roi_height_scale = dst_roi_height;
+ }
+
+ if ((dst_roi_width_scale != iBuf->roi.width) ||
+ (dst_roi_height_scale != iBuf->roi.height) ||
+ (iBuf->mdpImg.mdpOp & MDPOP_SHARPENING)) {
+ *pppop_reg_ptr |=
+ (PPP_OP_SCALE_Y_ON | PPP_OP_SCALE_X_ON);
+
+ mdp_calc_scaleInitPhase_3p1(iBuf->roi.width,
+ iBuf->roi.height,
+ dst_roi_width,
+ dst_roi_height,
+ iBuf->mdpImg.
+ mdpOp & MDPOP_ROT90, 1, 1,
+ &pval);
+
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x013c,
+ pval.phase_init_x);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0140,
+ pval.phase_init_y);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0144,
+ pval.phase_step_x);
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0148,
+ pval.phase_step_y);
+
+ use_pr = (inputRGB) && (outputRGB);
+
+ /* x-direction */
+ if ((dst_roi_width_scale == iBuf->roi.width) &&
+ !(iBuf->mdpImg.mdpOp & MDPOP_SHARPENING)) {
+ *pppop_reg_ptr &= ~PPP_OP_SCALE_X_ON;
+ } else
+ if (((dst_roi_width_scale * 10) / iBuf->roi.width) >
+ 8) {
+ if ((use_pr)
+ && (mdp_scale_0p8_to_8p0_mode !=
+ MDP_SCALE_PR)) {
+ mdp_scale_0p8_to_8p0_mode =
+ MDP_SCALE_PR;
+ mdp_update_scale_table
+ (MDP_SCALE_0P8_TO_8P0_INDEX,
+ mdp_scale_pixel_repeat_C0,
+ mdp_scale_pixel_repeat_C1,
+ mdp_scale_pixel_repeat_C2,
+ mdp_scale_pixel_repeat_C3);
+ } else if ((!use_pr)
+ && (mdp_scale_0p8_to_8p0_mode !=
+ MDP_SCALE_FIR)) {
+ mdp_scale_0p8_to_8p0_mode =
+ MDP_SCALE_FIR;
+ mdp_update_scale_table
+ (MDP_SCALE_0P8_TO_8P0_INDEX,
+ mdp_scale_0p8_to_8p0_C0,
+ mdp_scale_0p8_to_8p0_C1,
+ mdp_scale_0p8_to_8p0_C2,
+ mdp_scale_0p8_to_8p0_C3);
+ }
+ ppp_scale_config |= (SCALE_U1_SET << 2);
+ } else
+ if (((dst_roi_width_scale * 10) / iBuf->roi.width) >
+ 6) {
+ if ((use_pr)
+ && (mdp_scale_0p6_to_0p8_mode !=
+ MDP_SCALE_PR)) {
+ mdp_scale_0p6_to_0p8_mode =
+ MDP_SCALE_PR;
+ mdp_update_scale_table
+ (MDP_SCALE_0P6_TO_0P8_INDEX,
+ mdp_scale_pixel_repeat_C0,
+ mdp_scale_pixel_repeat_C1,
+ mdp_scale_pixel_repeat_C2,
+ mdp_scale_pixel_repeat_C3);
+ } else if ((!use_pr)
+ && (mdp_scale_0p6_to_0p8_mode !=
+ MDP_SCALE_FIR)) {
+ mdp_scale_0p6_to_0p8_mode =
+ MDP_SCALE_FIR;
+ mdp_update_scale_table
+ (MDP_SCALE_0P6_TO_0P8_INDEX,
+ mdp_scale_0p6_to_0p8_C0,
+ mdp_scale_0p6_to_0p8_C1,
+ mdp_scale_0p6_to_0p8_C2,
+ mdp_scale_0p6_to_0p8_C3);
+ }
+ ppp_scale_config |= (SCALE_D2_SET << 2);
+ } else
+ if (((dst_roi_width_scale * 10) / iBuf->roi.width) >
+ 4) {
+ if ((use_pr)
+ && (mdp_scale_0p4_to_0p6_mode !=
+ MDP_SCALE_PR)) {
+ mdp_scale_0p4_to_0p6_mode =
+ MDP_SCALE_PR;
+ mdp_update_scale_table
+ (MDP_SCALE_0P4_TO_0P6_INDEX,
+ mdp_scale_pixel_repeat_C0,
+ mdp_scale_pixel_repeat_C1,
+ mdp_scale_pixel_repeat_C2,
+ mdp_scale_pixel_repeat_C3);
+ } else if ((!use_pr)
+ && (mdp_scale_0p4_to_0p6_mode !=
+ MDP_SCALE_FIR)) {
+ mdp_scale_0p4_to_0p6_mode =
+ MDP_SCALE_FIR;
+ mdp_update_scale_table
+ (MDP_SCALE_0P4_TO_0P6_INDEX,
+ mdp_scale_0p4_to_0p6_C0,
+ mdp_scale_0p4_to_0p6_C1,
+ mdp_scale_0p4_to_0p6_C2,
+ mdp_scale_0p4_to_0p6_C3);
+ }
+ ppp_scale_config |= (SCALE_D1_SET << 2);
+ } else
+ if (((dst_roi_width_scale * 4) / iBuf->roi.width) >=
+ 1) {
+ if ((use_pr)
+ && (mdp_scale_0p2_to_0p4_mode !=
+ MDP_SCALE_PR)) {
+ mdp_scale_0p2_to_0p4_mode =
+ MDP_SCALE_PR;
+ mdp_update_scale_table
+ (MDP_SCALE_0P2_TO_0P4_INDEX,
+ mdp_scale_pixel_repeat_C0,
+ mdp_scale_pixel_repeat_C1,
+ mdp_scale_pixel_repeat_C2,
+ mdp_scale_pixel_repeat_C3);
+ } else if ((!use_pr)
+ && (mdp_scale_0p2_to_0p4_mode !=
+ MDP_SCALE_FIR)) {
+ mdp_scale_0p2_to_0p4_mode =
+ MDP_SCALE_FIR;
+ mdp_update_scale_table
+ (MDP_SCALE_0P2_TO_0P4_INDEX,
+ mdp_scale_0p2_to_0p4_C0,
+ mdp_scale_0p2_to_0p4_C1,
+ mdp_scale_0p2_to_0p4_C2,
+ mdp_scale_0p2_to_0p4_C3);
+ }
+ ppp_scale_config |= (SCALE_D0_SET << 2);
+ } else
+ ppp_scale_config |= BIT(0);
+
+ /* y-direction */
+ if ((dst_roi_height_scale == iBuf->roi.height) &&
+ !(iBuf->mdpImg.mdpOp & MDPOP_SHARPENING)) {
+ *pppop_reg_ptr &= ~PPP_OP_SCALE_Y_ON;
+ } else if (((dst_roi_height_scale * 10) /
+ iBuf->roi.height) > 8) {
+ if ((use_pr)
+ && (mdp_scale_0p8_to_8p0_mode !=
+ MDP_SCALE_PR)) {
+ mdp_scale_0p8_to_8p0_mode =
+ MDP_SCALE_PR;
+ mdp_update_scale_table
+ (MDP_SCALE_0P8_TO_8P0_INDEX,
+ mdp_scale_pixel_repeat_C0,
+ mdp_scale_pixel_repeat_C1,
+ mdp_scale_pixel_repeat_C2,
+ mdp_scale_pixel_repeat_C3);
+ } else if ((!use_pr)
+ && (mdp_scale_0p8_to_8p0_mode !=
+ MDP_SCALE_FIR)) {
+ mdp_scale_0p8_to_8p0_mode =
+ MDP_SCALE_FIR;
+ mdp_update_scale_table
+ (MDP_SCALE_0P8_TO_8P0_INDEX,
+ mdp_scale_0p8_to_8p0_C0,
+ mdp_scale_0p8_to_8p0_C1,
+ mdp_scale_0p8_to_8p0_C2,
+ mdp_scale_0p8_to_8p0_C3);
+ }
+ ppp_scale_config |= (SCALE_U1_SET << 4);
+ } else
+ if (((dst_roi_height_scale * 10) /
+ iBuf->roi.height) > 6) {
+ if ((use_pr)
+ && (mdp_scale_0p6_to_0p8_mode !=
+ MDP_SCALE_PR)) {
+ mdp_scale_0p6_to_0p8_mode =
+ MDP_SCALE_PR;
+ mdp_update_scale_table
+ (MDP_SCALE_0P6_TO_0P8_INDEX,
+ mdp_scale_pixel_repeat_C0,
+ mdp_scale_pixel_repeat_C1,
+ mdp_scale_pixel_repeat_C2,
+ mdp_scale_pixel_repeat_C3);
+ } else if ((!use_pr)
+ && (mdp_scale_0p6_to_0p8_mode !=
+ MDP_SCALE_FIR)) {
+ mdp_scale_0p6_to_0p8_mode =
+ MDP_SCALE_FIR;
+ mdp_update_scale_table
+ (MDP_SCALE_0P6_TO_0P8_INDEX,
+ mdp_scale_0p6_to_0p8_C0,
+ mdp_scale_0p6_to_0p8_C1,
+ mdp_scale_0p6_to_0p8_C2,
+ mdp_scale_0p6_to_0p8_C3);
+ }
+ ppp_scale_config |= (SCALE_D2_SET << 4);
+ } else
+ if (((dst_roi_height_scale * 10) /
+ iBuf->roi.height) > 4) {
+ if ((use_pr)
+ && (mdp_scale_0p4_to_0p6_mode !=
+ MDP_SCALE_PR)) {
+ mdp_scale_0p4_to_0p6_mode =
+ MDP_SCALE_PR;
+ mdp_update_scale_table
+ (MDP_SCALE_0P4_TO_0P6_INDEX,
+ mdp_scale_pixel_repeat_C0,
+ mdp_scale_pixel_repeat_C1,
+ mdp_scale_pixel_repeat_C2,
+ mdp_scale_pixel_repeat_C3);
+ } else if ((!use_pr)
+ && (mdp_scale_0p4_to_0p6_mode !=
+ MDP_SCALE_FIR)) {
+ mdp_scale_0p4_to_0p6_mode =
+ MDP_SCALE_FIR;
+ mdp_update_scale_table
+ (MDP_SCALE_0P4_TO_0P6_INDEX,
+ mdp_scale_0p4_to_0p6_C0,
+ mdp_scale_0p4_to_0p6_C1,
+ mdp_scale_0p4_to_0p6_C2,
+ mdp_scale_0p4_to_0p6_C3);
+ }
+ ppp_scale_config |= (SCALE_D1_SET << 4);
+ } else
+ if (((dst_roi_height_scale * 4) /
+ iBuf->roi.height) >= 1) {
+ if ((use_pr)
+ && (mdp_scale_0p2_to_0p4_mode !=
+ MDP_SCALE_PR)) {
+ mdp_scale_0p2_to_0p4_mode =
+ MDP_SCALE_PR;
+ mdp_update_scale_table
+ (MDP_SCALE_0P2_TO_0P4_INDEX,
+ mdp_scale_pixel_repeat_C0,
+ mdp_scale_pixel_repeat_C1,
+ mdp_scale_pixel_repeat_C2,
+ mdp_scale_pixel_repeat_C3);
+ } else if ((!use_pr)
+ && (mdp_scale_0p2_to_0p4_mode !=
+ MDP_SCALE_FIR)) {
+ mdp_scale_0p2_to_0p4_mode =
+ MDP_SCALE_FIR;
+ mdp_update_scale_table
+ (MDP_SCALE_0P2_TO_0P4_INDEX,
+ mdp_scale_0p2_to_0p4_C0,
+ mdp_scale_0p2_to_0p4_C1,
+ mdp_scale_0p2_to_0p4_C2,
+ mdp_scale_0p2_to_0p4_C3);
+ }
+ ppp_scale_config |= (SCALE_D0_SET << 4);
+ } else
+ ppp_scale_config |= BIT(1);
+
+ if (iBuf->mdpImg.mdpOp & MDPOP_SHARPENING) {
+ ppp_scale_config |= BIT(7);
+ MDP_OUTP(MDP_BASE + 0x50020,
+ iBuf->mdpImg.sp_value);
+ }
+
+ MDP_OUTP(MDP_BASE + 0x10230, ppp_scale_config);
+ } else {
+ iBuf->mdpImg.mdpOp &= ~(MDPOP_ASCALE);
+ }
+ }
+}
+
+void mdp_adjust_start_addr(uint8 **src0,
+ uint8 **src1,
+ int v_slice,
+ int h_slice,
+ int x,
+ int y,
+ uint32 width,
+ uint32 height, int bpp, MDPIBUF *iBuf, int layer)
+{
+ switch (layer) {
+ case 0:
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0200, (y << 16) | (x));
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0208,
+ (height << 16) | (width));
+ break;
+
+ case 1:
+ /* MDP 3.1 HW bug workaround */
+ if (iBuf->ibuf_type == MDP_YCRYCB_H2V1) {
+ *src0 += (x + y * width) * bpp;
+ x = y = 0;
+ width = iBuf->roi.dst_width;
+ height = iBuf->roi.dst_height;
+ }
+
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0204, (y << 16) | (x));
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x020c,
+ (height << 16) | (width));
+ break;
+
+ case 2:
+ MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x019c, (y << 16) | (x));
+ break;
+ }
+}
+
+void mdp_set_blend_attr(MDPIBUF *iBuf,
+ uint32 *alpha,
+ uint32 *tpVal,
+ uint32 perPixelAlpha, uint32 *pppop_reg_ptr)
+{
+ int bg_alpha;
+
+ *alpha = iBuf->mdpImg.alpha;
+ *tpVal = iBuf->mdpImg.tpVal;
+
+ if (iBuf->mdpImg.mdpOp & MDPOP_FG_PM_ALPHA) {
+ *pppop_reg_ptr |= PPP_OP_ROT_ON |
+ PPP_OP_BLEND_ON | PPP_OP_BLEND_CONSTANT_ALPHA;
+
+ bg_alpha = PPP_BLEND_BG_USE_ALPHA_SEL |
+ PPP_BLEND_BG_ALPHA_REVERSE;
+
+ if (perPixelAlpha)
+ bg_alpha |= PPP_BLEND_BG_SRCPIXEL_ALPHA;
+ else
+ bg_alpha |= PPP_BLEND_BG_CONSTANT_ALPHA;
+
+ outpdw(MDP_BASE + 0x70010, bg_alpha);
+
+ if (iBuf->mdpImg.mdpOp & MDPOP_TRANSP)
+ *pppop_reg_ptr |= PPP_BLEND_CALPHA_TRNASP;
+ } else if (perPixelAlpha) {
+ *pppop_reg_ptr |= PPP_OP_ROT_ON |
+ PPP_OP_BLEND_ON | PPP_OP_BLEND_SRCPIXEL_ALPHA;
+ } else {
+ if ((iBuf->mdpImg.mdpOp & MDPOP_ALPHAB)
+ && (iBuf->mdpImg.alpha == 0xff)) {
+ iBuf->mdpImg.mdpOp &= ~(MDPOP_ALPHAB);
+ }
+
+ if ((iBuf->mdpImg.mdpOp & MDPOP_ALPHAB)
+ || (iBuf->mdpImg.mdpOp & MDPOP_TRANSP)) {
+ *pppop_reg_ptr |=
+ PPP_OP_ROT_ON | PPP_OP_BLEND_ON |
+ PPP_OP_BLEND_CONSTANT_ALPHA |
+ PPP_OP_BLEND_ALPHA_BLEND_NORMAL;
+ }
+
+ if (iBuf->mdpImg.mdpOp & MDPOP_TRANSP)
+ *pppop_reg_ptr |= PPP_BLEND_CALPHA_TRNASP;
+ }
+}
diff --git a/drivers/staging/msm/mdp_vsync.c b/drivers/staging/msm/mdp_vsync.c
new file mode 100644
index 0000000..bbd4560
--- /dev/null
+++ b/drivers/staging/msm/mdp_vsync.c
@@ -0,0 +1,389 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/hrtimer.h>
+#include <linux/vmalloc.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <mach/gpio.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mddihost.h"
+
+#ifdef CONFIG_FB_MSM_MDP40
+#define MDP_SYNC_CFG_0 0x100
+#define MDP_SYNC_STATUS_0 0x10c
+#define MDP_PRIM_VSYNC_OUT_CTRL 0x118
+#define MDP_PRIM_VSYNC_INIT_VAL 0x128
+#else
+#define MDP_SYNC_CFG_0 0x300
+#define MDP_SYNC_STATUS_0 0x30c
+#define MDP_PRIM_VSYNC_OUT_CTRL 0x318
+#define MDP_PRIM_VSYNC_INIT_VAL 0x328
+#endif
+
+extern mddi_lcd_type mddi_lcd_idx;
+extern spinlock_t mdp_spin_lock;
+extern struct workqueue_struct *mdp_vsync_wq;
+extern int lcdc_mode;
+extern int vsync_mode;
+
+#ifdef MDP_HW_VSYNC
+int vsync_above_th = 4;
+int vsync_start_th = 1;
+int vsync_load_cnt;
+
+struct clk *mdp_vsync_clk;
+
+void mdp_hw_vsync_clk_enable(struct msm_fb_data_type *mfd)
+{
+ if (mfd->use_mdp_vsync)
+ clk_enable(mdp_vsync_clk);
+}
+
+void mdp_hw_vsync_clk_disable(struct msm_fb_data_type *mfd)
+{
+ if (mfd->use_mdp_vsync)
+ clk_disable(mdp_vsync_clk);
+}
+#endif
+
+static void mdp_set_vsync(unsigned long data)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)data;
+ struct msm_fb_panel_data *pdata = NULL;
+
+ pdata = (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data;
+
+ if ((pdata) && (pdata->set_vsync_notifier == NULL))
+ return;
+
+ init_timer(&mfd->vsync_resync_timer);
+ mfd->vsync_resync_timer.function = mdp_set_vsync;
+ mfd->vsync_resync_timer.data = data;
+ mfd->vsync_resync_timer.expires =
+ jiffies + mfd->panel_info.lcd.vsync_notifier_period;
+ add_timer(&mfd->vsync_resync_timer);
+
+ if ((mfd->panel_info.lcd.vsync_enable) && (mfd->panel_power_on)
+ && (!mfd->vsync_handler_pending)) {
+ mfd->vsync_handler_pending = TRUE;
+ if (!queue_work(mdp_vsync_wq, &mfd->vsync_resync_worker)) {
+ MSM_FB_INFO
+ ("mdp_set_vsync: can't queue_work! -> needs to increase vsync_resync_timer_duration\n");
+ }
+ } else {
+ MSM_FB_DEBUG
+ ("mdp_set_vsync failed! EN:%d PWR:%d PENDING:%d\n",
+ mfd->panel_info.lcd.vsync_enable, mfd->panel_power_on,
+ mfd->vsync_handler_pending);
+ }
+}
+
+static void mdp_vsync_handler(void *data)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)data;
+
+ if (mfd->use_mdp_vsync) {
+#ifdef MDP_HW_VSYNC
+ if (mfd->panel_power_on)
+ MDP_OUTP(MDP_BASE + MDP_SYNC_STATUS_0, vsync_load_cnt);
+
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, TRUE);
+#endif
+ } else {
+ mfd->last_vsync_timetick = ktime_get_real();
+ }
+
+ mfd->vsync_handler_pending = FALSE;
+}
+
+irqreturn_t mdp_hw_vsync_handler_proxy(int irq, void *data)
+{
+ /*
+ * ToDo: tried enabling/disabling GPIO MDP HW VSYNC interrupt
+ * but getting inaccurate timing in mdp_vsync_handler()
+ * disable_irq(MDP_HW_VSYNC_IRQ);
+ */
+ mdp_vsync_handler(data);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef MDP_HW_VSYNC
+static void mdp_set_sync_cfg_0(struct msm_fb_data_type *mfd, int vsync_cnt)
+{
+ unsigned long cfg;
+
+ cfg = mfd->total_lcd_lines - 1;
+ cfg <<= MDP_SYNCFG_HGT_LOC;
+ if (mfd->panel_info.lcd.hw_vsync_mode)
+ cfg |= MDP_SYNCFG_VSYNC_EXT_EN;
+ cfg |= (MDP_SYNCFG_VSYNC_INT_EN | vsync_cnt);
+
+ MDP_OUTP(MDP_BASE + MDP_SYNC_CFG_0, cfg);
+}
+#endif
+
+void mdp_config_vsync(struct msm_fb_data_type *mfd)
+{
+
+ /* vsync on primary lcd only for now */
+ if ((mfd->dest != DISPLAY_LCD) || (mfd->panel_info.pdest != DISPLAY_1)
+ || (!vsync_mode)) {
+ goto err_handle;
+ }
+
+ if (mfd->panel_info.lcd.vsync_enable) {
+ mfd->total_porch_lines = mfd->panel_info.lcd.v_back_porch +
+ mfd->panel_info.lcd.v_front_porch +
+ mfd->panel_info.lcd.v_pulse_width;
+ mfd->total_lcd_lines =
+ mfd->panel_info.yres + mfd->total_porch_lines;
+ mfd->lcd_ref_usec_time =
+ 100000000 / mfd->panel_info.lcd.refx100;
+ mfd->vsync_handler_pending = FALSE;
+ mfd->last_vsync_timetick.tv.sec = 0;
+ mfd->last_vsync_timetick.tv.nsec = 0;
+
+#ifdef MDP_HW_VSYNC
+ if (mdp_vsync_clk == NULL)
+ mdp_vsync_clk = clk_get(NULL, "mdp_vsync_clk");
+
+ if (IS_ERR(mdp_vsync_clk)) {
+ printk(KERN_ERR "error: can't get mdp_vsync_clk!\n");
+ mfd->use_mdp_vsync = 0;
+ } else
+ mfd->use_mdp_vsync = 1;
+
+ if (mfd->use_mdp_vsync) {
+ uint32 vsync_cnt_cfg, vsync_cnt_cfg_dem;
+ uint32 mdp_vsync_clk_speed_hz;
+
+ mdp_vsync_clk_speed_hz = clk_get_rate(mdp_vsync_clk);
+
+ if (mdp_vsync_clk_speed_hz == 0) {
+ mfd->use_mdp_vsync = 0;
+ } else {
+ /*
+ * Do this calculation in 2 steps for
+ * rounding uint32 properly.
+ */
+ vsync_cnt_cfg_dem =
+ (mfd->panel_info.lcd.refx100 *
+ mfd->total_lcd_lines) / 100;
+ vsync_cnt_cfg =
+ (mdp_vsync_clk_speed_hz) /
+ vsync_cnt_cfg_dem;
+
+ /* MDP cmd block enable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON,
+ FALSE);
+ mdp_hw_vsync_clk_enable(mfd);
+
+ mdp_set_sync_cfg_0(mfd, vsync_cnt_cfg);
+
+ /*
+ * load the last line + 1 to be in the
+ * safety zone
+ */
+ vsync_load_cnt = mfd->panel_info.yres;
+
+ /* line counter init value at the next pulse */
+ MDP_OUTP(MDP_BASE + MDP_PRIM_VSYNC_INIT_VAL,
+ vsync_load_cnt);
+
+ /*
+ * external vsync source pulse width and
+ * polarity flip
+ */
+ MDP_OUTP(MDP_BASE + MDP_PRIM_VSYNC_OUT_CTRL,
+ BIT(30) | BIT(0));
+
+
+ /* threshold */
+ MDP_OUTP(MDP_BASE + 0x200,
+ (vsync_above_th << 16) |
+ (vsync_start_th));
+
+ mdp_hw_vsync_clk_disable(mfd);
+ /* MDP cmd block disable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK,
+ MDP_BLOCK_POWER_OFF, FALSE);
+ }
+ }
+#else
+ mfd->use_mdp_vsync = 0;
+ hrtimer_init(&mfd->dma_hrtimer, CLOCK_MONOTONIC,
+ HRTIMER_MODE_REL);
+ mfd->dma_hrtimer.function = mdp_dma2_vsync_hrtimer_handler;
+ mfd->vsync_width_boundary = vmalloc(mfd->panel_info.xres * 4);
+#endif
+
+ mfd->channel_irq = 0;
+ if (mfd->panel_info.lcd.hw_vsync_mode) {
+ u32 vsync_gpio = mfd->vsync_gpio;
+ u32 ret;
+
+ if (vsync_gpio == -1) {
+ MSM_FB_INFO("vsync_gpio not defined!\n");
+ goto err_handle;
+ }
+
+ ret = gpio_tlmm_config(GPIO_CFG
+ (vsync_gpio,
+ (mfd->use_mdp_vsync) ? 1 : 0,
+ GPIO_INPUT,
+ GPIO_PULL_DOWN,
+ GPIO_2MA),
+ GPIO_ENABLE);
+ if (ret)
+ goto err_handle;
+
+ if (!mfd->use_mdp_vsync) {
+ mfd->channel_irq = MSM_GPIO_TO_INT(vsync_gpio);
+ if (request_irq
+ (mfd->channel_irq,
+ &mdp_hw_vsync_handler_proxy,
+ IRQF_TRIGGER_FALLING, "VSYNC_GPIO",
+ (void *)mfd)) {
+ MSM_FB_INFO
+ ("irq=%d failed! vsync_gpio=%d\n",
+ mfd->channel_irq,
+ vsync_gpio);
+ goto err_handle;
+ }
+ }
+ }
+
+ mdp_set_vsync((unsigned long)mfd);
+ }
+
+ return;
+
+err_handle:
+ if (mfd->vsync_width_boundary)
+ vfree(mfd->vsync_width_boundary);
+ mfd->panel_info.lcd.vsync_enable = FALSE;
+ printk(KERN_ERR "%s: failed!\n", __func__);
+}
+
+void mdp_vsync_resync_workqueue_handler(struct work_struct *work)
+{
+ struct msm_fb_data_type *mfd = NULL;
+ int vsync_fnc_enabled = FALSE;
+ struct msm_fb_panel_data *pdata = NULL;
+
+ mfd = container_of(work, struct msm_fb_data_type, vsync_resync_worker);
+
+ if (mfd) {
+ if (mfd->panel_power_on) {
+ pdata =
+ (struct msm_fb_panel_data *)mfd->pdev->dev.
+ platform_data;
+
+ /*
+ * we need to turn on MDP power if it uses MDP vsync
+ * HW block in SW mode
+ */
+ if ((!mfd->panel_info.lcd.hw_vsync_mode) &&
+ (mfd->use_mdp_vsync) &&
+ (pdata) && (pdata->set_vsync_notifier != NULL)) {
+ /*
+ * enable pwr here since we can't enable it in
+ * vsync callback in isr mode
+ */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON,
+ FALSE);
+ }
+
+ if (pdata->set_vsync_notifier != NULL) {
+ vsync_fnc_enabled = TRUE;
+ pdata->set_vsync_notifier(mdp_vsync_handler,
+ (void *)mfd);
+ }
+ }
+ }
+
+ if ((mfd) && (!vsync_fnc_enabled))
+ mfd->vsync_handler_pending = FALSE;
+}
+
+boolean mdp_hw_vsync_set_handler(msm_fb_vsync_handler_type handler, void *data)
+{
+ /*
+ * ToDo: tried enabling/disabling GPIO MDP HW VSYNC interrupt
+ * but getting inaccurate timing in mdp_vsync_handler()
+ * enable_irq(MDP_HW_VSYNC_IRQ);
+ */
+
+ return TRUE;
+}
+
+uint32 mdp_get_lcd_line_counter(struct msm_fb_data_type *mfd)
+{
+ uint32 elapsed_usec_time;
+ uint32 lcd_line;
+ ktime_t last_vsync_timetick_local;
+ ktime_t curr_time;
+ unsigned long flag;
+
+ if ((!mfd->panel_info.lcd.vsync_enable) || (!vsync_mode))
+ return 0;
+
+ spin_lock_irqsave(&mdp_spin_lock, flag);
+ last_vsync_timetick_local = mfd->last_vsync_timetick;
+ spin_unlock_irqrestore(&mdp_spin_lock, flag);
+
+ curr_time = ktime_get_real();
+ elapsed_usec_time =
+ ((curr_time.tv.sec - last_vsync_timetick_local.tv.sec) * 1000000) +
+ ((curr_time.tv.nsec - last_vsync_timetick_local.tv.nsec) / 1000);
+
+ elapsed_usec_time = elapsed_usec_time % mfd->lcd_ref_usec_time;
+
+ /* lcd line calculation referencing to line counter = 0 */
+ lcd_line =
+ (elapsed_usec_time * mfd->total_lcd_lines) / mfd->lcd_ref_usec_time;
+
+ /* lcd line adjusment referencing to the actual line counter at vsync */
+ lcd_line =
+ (mfd->total_lcd_lines - mfd->panel_info.lcd.v_back_porch +
+ lcd_line) % (mfd->total_lcd_lines + 1);
+
+ if (lcd_line > mfd->total_lcd_lines) {
+ MSM_FB_INFO
+ ("mdp_get_lcd_line_counter: mdp_lcd_rd_cnt >= mfd->total_lcd_lines error!\n");
+ }
+
+ return lcd_line;
+}
diff --git a/drivers/staging/msm/memory.c b/drivers/staging/msm/memory.c
new file mode 100644
index 0000000..cc80fdf
--- /dev/null
+++ b/drivers/staging/msm/memory.c
@@ -0,0 +1,214 @@
+/* arch/arm/mach-msm/memory.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/mm_types.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+#include <asm/mach/map.h>
+#include "memory_ll.h"
+#include <asm/cacheflush.h>
+#if defined(CONFIG_MSM_NPA_REMOTE)
+#include "npa_remote.h"
+#include <linux/completion.h>
+#include <linux/err.h>
+#endif
+
+int arch_io_remap_pfn_range(struct vm_area_struct *vma, unsigned long addr,
+ unsigned long pfn, unsigned long size, pgprot_t prot)
+{
+ unsigned long pfn_addr = pfn << PAGE_SHIFT;
+/*
+ if ((pfn_addr >= 0x88000000) && (pfn_addr < 0xD0000000)) {
+ prot = pgprot_device(prot);
+ printk("remapping device %lx\n", prot);
+ }
+*/
+ panic("Memory remap PFN stuff not done\n");
+ return remap_pfn_range(vma, addr, pfn, size, prot);
+}
+
+void *zero_page_strongly_ordered;
+
+static void map_zero_page_strongly_ordered(void)
+{
+ if (zero_page_strongly_ordered)
+ return;
+/*
+ zero_page_strongly_ordered =
+ ioremap_strongly_ordered(page_to_pfn(empty_zero_page)
+ << PAGE_SHIFT, PAGE_SIZE);
+*/
+ panic("Strongly ordered memory functions not implemented\n");
+}
+
+void write_to_strongly_ordered_memory(void)
+{
+ map_zero_page_strongly_ordered();
+ *(int *)zero_page_strongly_ordered = 0;
+}
+EXPORT_SYMBOL(write_to_strongly_ordered_memory);
+
+void flush_axi_bus_buffer(void)
+{
+ __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
+ : : "r" (0) : "memory");
+ write_to_strongly_ordered_memory();
+}
+
+#define CACHE_LINE_SIZE 32
+
+/* These cache related routines make the assumption that the associated
+ * physical memory is contiguous. They will operate on all (L1
+ * and L2 if present) caches.
+ */
+void clean_and_invalidate_caches(unsigned long vstart,
+ unsigned long length, unsigned long pstart)
+{
+ unsigned long vaddr;
+
+ for (vaddr = vstart; vaddr < vstart + length; vaddr += CACHE_LINE_SIZE)
+ asm ("mcr p15, 0, %0, c7, c14, 1" : : "r" (vaddr));
+#ifdef CONFIG_OUTER_CACHE
+ outer_flush_range(pstart, pstart + length);
+#endif
+ asm ("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
+ asm ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
+
+ flush_axi_bus_buffer();
+}
+
+void clean_caches(unsigned long vstart,
+ unsigned long length, unsigned long pstart)
+{
+ unsigned long vaddr;
+
+ for (vaddr = vstart; vaddr < vstart + length; vaddr += CACHE_LINE_SIZE)
+ asm ("mcr p15, 0, %0, c7, c10, 1" : : "r" (vaddr));
+#ifdef CONFIG_OUTER_CACHE
+ outer_clean_range(pstart, pstart + length);
+#endif
+ asm ("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
+ asm ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
+
+ flush_axi_bus_buffer();
+}
+
+void invalidate_caches(unsigned long vstart,
+ unsigned long length, unsigned long pstart)
+{
+ unsigned long vaddr;
+
+ for (vaddr = vstart; vaddr < vstart + length; vaddr += CACHE_LINE_SIZE)
+ asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (vaddr));
+#ifdef CONFIG_OUTER_CACHE
+ outer_inv_range(pstart, pstart + length);
+#endif
+ asm ("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
+ asm ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
+
+ flush_axi_bus_buffer();
+}
+
+void *alloc_bootmem_aligned(unsigned long size, unsigned long alignment)
+{
+ void *unused_addr = NULL;
+ unsigned long addr, tmp_size, unused_size;
+
+ /* Allocate maximum size needed, see where it ends up.
+ * Then free it -- in this path there are no other allocators
+ * so we can depend on getting the same address back
+ * when we allocate a smaller piece that is aligned
+ * at the end (if necessary) and the piece we really want,
+ * then free the unused first piece.
+ */
+
+ tmp_size = size + alignment - PAGE_SIZE;
+ addr = (unsigned long)alloc_bootmem(tmp_size);
+ free_bootmem(__pa(addr), tmp_size);
+
+ unused_size = alignment - (addr % alignment);
+ if (unused_size)
+ unused_addr = alloc_bootmem(unused_size);
+
+ addr = (unsigned long)alloc_bootmem(size);
+ if (unused_size)
+ free_bootmem(__pa(unused_addr), unused_size);
+
+ return (void *)addr;
+}
+
+#if defined(CONFIG_MSM_NPA_REMOTE)
+struct npa_client *npa_memory_client;
+#endif
+
+static int change_memory_power_state(unsigned long start_pfn,
+ unsigned long nr_pages, int state)
+{
+#if defined(CONFIG_MSM_NPA_REMOTE)
+ static atomic_t node_created_flag = ATOMIC_INIT(1);
+#else
+ unsigned long start;
+ unsigned long size;
+ unsigned long virtual;
+#endif
+ int rc = 0;
+
+#if defined(CONFIG_MSM_NPA_REMOTE)
+ if (atomic_dec_and_test(&node_created_flag)) {
+ /* Create NPA 'required' client. */
+ npa_memory_client = npa_create_sync_client(NPA_MEMORY_NODE_NAME,
+ "memory node", NPA_CLIENT_REQUIRED);
+ if (IS_ERR(npa_memory_client)) {
+ rc = PTR_ERR(npa_memory_client);
+ return rc;
+ }
+ }
+
+ rc = npa_issue_required_request(npa_memory_client, state);
+#else
+ if (state == MEMORY_DEEP_POWERDOWN) {
+ /* simulate turning off memory by writing bit pattern into it */
+ start = start_pfn << PAGE_SHIFT;
+ size = nr_pages << PAGE_SHIFT;
+ virtual = __phys_to_virt(start);
+ memset((void *)virtual, 0x27, size);
+ }
+#endif
+ return rc;
+}
+
+int platform_physical_remove_pages(unsigned long start_pfn,
+ unsigned long nr_pages)
+{
+ return change_memory_power_state(start_pfn, nr_pages,
+ MEMORY_DEEP_POWERDOWN);
+}
+
+int platform_physical_add_pages(unsigned long start_pfn,
+ unsigned long nr_pages)
+{
+ return change_memory_power_state(start_pfn, nr_pages, MEMORY_ACTIVE);
+}
+
+int platform_physical_low_power_pages(unsigned long start_pfn,
+ unsigned long nr_pages)
+{
+ return change_memory_power_state(start_pfn, nr_pages,
+ MEMORY_SELF_REFRESH);
+}
diff --git a/drivers/staging/msm/memory_ll.h b/drivers/staging/msm/memory_ll.h
new file mode 100644
index 0000000..18a239a
--- /dev/null
+++ b/drivers/staging/msm/memory_ll.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef __ASM_ARCH_MEMORY_LL_H
+#define __ASM_ARCH_MEMORY_LL_H
+
+#define MAX_PHYSMEM_BITS 32
+#define SECTION_SIZE_BITS 25
+
+#define HAS_ARCH_IO_REMAP_PFN_RANGE
+
+#ifndef __ASSEMBLY__
+void *alloc_bootmem_aligned(unsigned long size, unsigned long alignment);
+void clean_and_invalidate_caches(unsigned long, unsigned long, unsigned long);
+void clean_caches(unsigned long, unsigned long, unsigned long);
+void invalidate_caches(unsigned long, unsigned long, unsigned long);
+int platform_physical_remove_pages(unsigned long, unsigned long);
+int platform_physical_add_pages(unsigned long, unsigned long);
+int platform_physical_low_power_pages(unsigned long, unsigned long);
+
+#ifdef CONFIG_ARCH_MSM_ARM11
+void write_to_strongly_ordered_memory(void);
+
+#include <asm/mach-types.h>
+
+#define arch_barrier_extra() do \
+ { if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) \
+ write_to_strongly_ordered_memory(); \
+ } while (0)
+#endif
+
+#ifdef CONFIG_CACHE_L2X0
+extern void l2x0_cache_sync(void);
+#define finish_arch_switch(prev) do { l2x0_cache_sync(); } while (0)
+#endif
+
+#endif
+
+#ifdef CONFIG_ARCH_MSM_SCORPION
+#define arch_has_speculative_dfetch() 1
+#endif
+
+#endif
+
+/* these correspond to values known by the modem */
+#define MEMORY_DEEP_POWERDOWN 0
+#define MEMORY_SELF_REFRESH 1
+#define MEMORY_ACTIVE 2
+
+#define NPA_MEMORY_NODE_NAME "/mem/ebi1/cs1"
diff --git a/drivers/staging/msm/msm_fb.c b/drivers/staging/msm/msm_fb.c
new file mode 100644
index 0000000..af5620e
--- /dev/null
+++ b/drivers/staging/msm/msm_fb.c
@@ -0,0 +1,2354 @@
+/*
+ *
+ * Core MSM framebuffer driver.
+ *
+ * Copyright (C) 2007 Google Incorporated
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include "msm_mdp.h"
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <mach/board.h>
+#include <linux/uaccess.h>
+
+#include <linux/workqueue.h>
+#include <linux/string.h>
+#include <linux/version.h>
+#include <linux/proc_fs.h>
+#include <linux/vmalloc.h>
+#include <linux/debugfs.h>
+#include <linux/console.h>
+#include <linux/leds.h>
+#include <asm/dma-mapping.h>
+
+
+#define MSM_FB_C
+#include "msm_fb.h"
+#include "mddihosti.h"
+#include "tvenc.h"
+#include "mdp.h"
+#include "mdp4.h"
+
+#ifdef CONFIG_FB_MSM_LOGO
+#define INIT_IMAGE_FILE "/logo.rle"
+extern int load_565rle_image(char *filename);
+#endif
+
+
+#define pgprot_noncached(prot) \
+ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
+#define pgprot_writecombine(prot) \
+ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
+#define pgprot_device(prot) \
+ __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_DEV_NONSHARED)
+#define pgprot_writethroughcache(prot) \
+ __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_WRITETHROUGH)
+#define pgprot_writebackcache(prot) \
+ __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_WRITEBACK)
+#define pgprot_writebackwacache(prot) \
+ __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_WRITEALLOC)
+
+static unsigned char *fbram;
+static unsigned char *fbram_phys;
+static int fbram_size;
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+
+int vsync_mode = 1;
+
+#define MAX_FBI_LIST 32
+static struct fb_info *fbi_list[MAX_FBI_LIST];
+static int fbi_list_index;
+
+static struct msm_fb_data_type *mfd_list[MAX_FBI_LIST];
+static int mfd_list_index;
+
+static u32 msm_fb_pseudo_palette[16] = {
+ 0x00000000, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff
+};
+
+u32 msm_fb_debug_enabled;
+/* Setting msm_fb_msg_level to 8 prints out ALL messages */
+u32 msm_fb_msg_level = 7;
+
+/* Setting mddi_msg_level to 8 prints out ALL messages */
+u32 mddi_msg_level = 5;
+
+extern int32 mdp_block_power_cnt[MDP_MAX_BLOCK];
+extern unsigned long mdp_timer_duration;
+
+static int msm_fb_register(struct msm_fb_data_type *mfd);
+static int msm_fb_open(struct fb_info *info, int user);
+static int msm_fb_release(struct fb_info *info, int user);
+static int msm_fb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info);
+static int msm_fb_stop_sw_refresher(struct msm_fb_data_type *mfd);
+int msm_fb_resume_sw_refresher(struct msm_fb_data_type *mfd);
+static int msm_fb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info);
+static int msm_fb_set_par(struct fb_info *info);
+static int msm_fb_blank_sub(int blank_mode, struct fb_info *info,
+ boolean op_enable);
+static int msm_fb_suspend_sub(struct msm_fb_data_type *mfd);
+static int msm_fb_resume_sub(struct msm_fb_data_type *mfd);
+static int msm_fb_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg);
+static int msm_fb_mmap(struct fb_info *info, struct vm_area_struct * vma);
+
+#ifdef MSM_FB_ENABLE_DBGFS
+
+#define MSM_FB_MAX_DBGFS 1024
+#define MAX_BACKLIGHT_BRIGHTNESS 255
+
+int msm_fb_debugfs_file_index;
+struct dentry *msm_fb_debugfs_root;
+struct dentry *msm_fb_debugfs_file[MSM_FB_MAX_DBGFS];
+
+struct dentry *msm_fb_get_debugfs_root(void)
+{
+ if (msm_fb_debugfs_root == NULL)
+ msm_fb_debugfs_root = debugfs_create_dir("msm_fb", NULL);
+
+ return msm_fb_debugfs_root;
+}
+
+void msm_fb_debugfs_file_create(struct dentry *root, const char *name,
+ u32 *var)
+{
+ if (msm_fb_debugfs_file_index >= MSM_FB_MAX_DBGFS)
+ return;
+
+ msm_fb_debugfs_file[msm_fb_debugfs_file_index++] =
+ debugfs_create_u32(name, S_IRUGO | S_IWUSR, root, var);
+}
+#endif
+
+int msm_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+ if (!mfd->cursor_update)
+ return -ENODEV;
+
+ return mfd->cursor_update(info, cursor);
+}
+
+static int msm_fb_resource_initialized;
+
+#ifndef CONFIG_FB_BACKLIGHT
+static int lcd_backlight_registered;
+
+static void msm_fb_set_bl_brightness(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct msm_fb_data_type *mfd = dev_get_drvdata(led_cdev->dev->parent);
+ int bl_lvl;
+
+ if (value > MAX_BACKLIGHT_BRIGHTNESS)
+ value = MAX_BACKLIGHT_BRIGHTNESS;
+
+ /* This maps android backlight level 0 to 255 into
+ driver backlight level 0 to bl_max with rounding */
+ bl_lvl = (2 * value * mfd->panel_info.bl_max + MAX_BACKLIGHT_BRIGHTNESS)
+ /(2 * MAX_BACKLIGHT_BRIGHTNESS);
+
+ if (!bl_lvl && value)
+ bl_lvl = 1;
+
+ msm_fb_set_backlight(mfd, bl_lvl, 1);
+}
+
+static struct led_classdev backlight_led = {
+ .name = "lcd-backlight",
+ .brightness = MAX_BACKLIGHT_BRIGHTNESS,
+ .brightness_set = msm_fb_set_bl_brightness,
+};
+#endif
+
+static struct msm_fb_platform_data *msm_fb_pdata;
+
+int msm_fb_detect_client(const char *name)
+{
+ int ret = -EPERM;
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+ u32 id;
+#endif
+
+ if (msm_fb_pdata && msm_fb_pdata->detect_client) {
+ ret = msm_fb_pdata->detect_client(name);
+
+ /* if it's non mddi panel, we need to pre-scan
+ mddi client to see if we can disable mddi host */
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+ if (!ret && msm_fb_pdata->mddi_prescan)
+ id = mddi_get_client_id();
+#endif
+ }
+
+ return ret;
+}
+
+static int msm_fb_probe(struct platform_device *pdev)
+{
+ struct msm_fb_data_type *mfd;
+ int rc;
+
+ MSM_FB_DEBUG("msm_fb_probe\n");
+
+ if ((pdev->id == 0) && (pdev->num_resources > 0)) {
+ msm_fb_pdata = pdev->dev.platform_data;
+ fbram_size =
+ pdev->resource[0].end - pdev->resource[0].start + 1;
+ fbram_phys = (char *)pdev->resource[0].start;
+ fbram = ioremap((unsigned long)fbram_phys, fbram_size);
+
+ if (!fbram) {
+ printk(KERN_ERR "fbram ioremap failed!\n");
+ return -ENOMEM;
+ }
+ MSM_FB_INFO("msm_fb_probe: phy_Addr = 0x%x virt = 0x%x\n",
+ (int)fbram_phys, (int)fbram);
+
+ msm_fb_resource_initialized = 1;
+ return 0;
+ }
+
+ if (!msm_fb_resource_initialized)
+ return -EPERM;
+
+ mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+ if (!mfd)
+ return -ENODEV;
+
+ if (mfd->key != MFD_KEY)
+ return -EINVAL;
+
+ if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+ return -ENOMEM;
+
+ mfd->panel_info.frame_count = 0;
+ mfd->bl_level = mfd->panel_info.bl_max;
+
+ if (mfd->panel_info.type == LCDC_PANEL)
+ mfd->allow_set_offset =
+ msm_fb_pdata->allow_set_offset != NULL ?
+ msm_fb_pdata->allow_set_offset() : 0;
+ else
+ mfd->allow_set_offset = 0;
+
+ rc = msm_fb_register(mfd);
+ if (rc)
+ return rc;
+
+#ifdef CONFIG_FB_BACKLIGHT
+ msm_fb_config_backlight(mfd);
+#else
+ /* android supports only one lcd-backlight/lcd for now */
+ if (!lcd_backlight_registered) {
+ if (led_classdev_register(&pdev->dev, &backlight_led))
+ printk(KERN_ERR "led_classdev_register failed\n");
+ else
+ lcd_backlight_registered = 1;
+ }
+#endif
+
+ pdev_list[pdev_list_cnt++] = pdev;
+ return 0;
+}
+
+static int msm_fb_remove(struct platform_device *pdev)
+{
+ struct msm_fb_data_type *mfd;
+
+ MSM_FB_DEBUG("msm_fb_remove\n");
+
+ mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+ if (!mfd)
+ return -ENODEV;
+
+ if (mfd->key != MFD_KEY)
+ return -EINVAL;
+
+ if (msm_fb_suspend_sub(mfd))
+ printk(KERN_ERR "msm_fb_remove: can't stop the device %d\n", mfd->index);
+
+ if (mfd->channel_irq != 0)
+ free_irq(mfd->channel_irq, (void *)mfd);
+
+ if (mfd->vsync_width_boundary)
+ vfree(mfd->vsync_width_boundary);
+
+ if (mfd->vsync_resync_timer.function)
+ del_timer(&mfd->vsync_resync_timer);
+
+ if (mfd->refresh_timer.function)
+ del_timer(&mfd->refresh_timer);
+
+ if (mfd->dma_hrtimer.function)
+ hrtimer_cancel(&mfd->dma_hrtimer);
+
+ /* remove /dev/fb* */
+ unregister_framebuffer(mfd->fbi);
+
+#ifdef CONFIG_FB_BACKLIGHT
+ /* remove /sys/class/backlight */
+ backlight_device_unregister(mfd->fbi->bl_dev);
+#else
+ if (lcd_backlight_registered) {
+ lcd_backlight_registered = 0;
+ led_classdev_unregister(&backlight_led);
+ }
+#endif
+
+#ifdef MSM_FB_ENABLE_DBGFS
+ if (mfd->sub_dir)
+ debugfs_remove(mfd->sub_dir);
+#endif
+
+ return 0;
+}
+
+#if defined(CONFIG_PM) && !defined(CONFIG_HAS_EARLYSUSPEND)
+static int msm_fb_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct msm_fb_data_type *mfd;
+ int ret = 0;
+
+ MSM_FB_DEBUG("msm_fb_suspend\n");
+
+ mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+ if ((!mfd) || (mfd->key != MFD_KEY))
+ return 0;
+
+ acquire_console_sem();
+ fb_set_suspend(mfd->fbi, 1);
+
+ ret = msm_fb_suspend_sub(mfd);
+ if (ret != 0) {
+ printk(KERN_ERR "msm_fb: failed to suspend! %d\n", ret);
+ fb_set_suspend(mfd->fbi, 0);
+ } else {
+ pdev->dev.power.power_state = state;
+ }
+
+ release_console_sem();
+ return ret;
+}
+#else
+#define msm_fb_suspend NULL
+#endif
+
+static int msm_fb_suspend_sub(struct msm_fb_data_type *mfd)
+{
+ int ret = 0;
+
+ if ((!mfd) || (mfd->key != MFD_KEY))
+ return 0;
+
+ /*
+ * suspend this channel
+ */
+ mfd->suspend.sw_refreshing_enable = mfd->sw_refreshing_enable;
+ mfd->suspend.op_enable = mfd->op_enable;
+ mfd->suspend.panel_power_on = mfd->panel_power_on;
+
+ if (mfd->op_enable) {
+ ret =
+ msm_fb_blank_sub(FB_BLANK_POWERDOWN, mfd->fbi,
+ mfd->suspend.op_enable);
+ if (ret) {
+ MSM_FB_INFO
+ ("msm_fb_suspend: can't turn off display!\n");
+ return ret;
+ }
+ mfd->op_enable = FALSE;
+ }
+ /*
+ * try to power down
+ */
+ mdp_pipe_ctrl(MDP_MASTER_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+ /*
+ * detach display channel irq if there's any
+ * or wait until vsync-resync completes
+ */
+ if ((mfd->dest == DISPLAY_LCD)) {
+ if (mfd->panel_info.lcd.vsync_enable) {
+ if (mfd->panel_info.lcd.hw_vsync_mode) {
+ if (mfd->channel_irq != 0)
+ disable_irq(mfd->channel_irq);
+ } else {
+ volatile boolean vh_pending;
+ do {
+ vh_pending = mfd->vsync_handler_pending;
+ } while (vh_pending);
+ }
+ }
+ }
+
+ return 0;
+}
+
+#if defined(CONFIG_PM) && !defined(CONFIG_HAS_EARLYSUSPEND)
+static int msm_fb_resume(struct platform_device *pdev)
+{
+ /* This resume function is called when interrupt is enabled.
+ */
+ int ret = 0;
+ struct msm_fb_data_type *mfd;
+
+ MSM_FB_DEBUG("msm_fb_resume\n");
+
+ mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+ if ((!mfd) || (mfd->key != MFD_KEY))
+ return 0;
+
+ acquire_console_sem();
+ ret = msm_fb_resume_sub(mfd);
+ pdev->dev.power.power_state = PMSG_ON;
+ fb_set_suspend(mfd->fbi, 1);
+ release_console_sem();
+
+ return ret;
+}
+#else
+#define msm_fb_resume NULL
+#endif
+
+static int msm_fb_resume_sub(struct msm_fb_data_type *mfd)
+{
+ int ret = 0;
+
+ if ((!mfd) || (mfd->key != MFD_KEY))
+ return 0;
+
+ /* attach display channel irq if there's any */
+ if (mfd->channel_irq != 0)
+ enable_irq(mfd->channel_irq);
+
+ /* resume state var recover */
+ mfd->sw_refreshing_enable = mfd->suspend.sw_refreshing_enable;
+ mfd->op_enable = mfd->suspend.op_enable;
+
+ if (mfd->suspend.panel_power_on) {
+ ret =
+ msm_fb_blank_sub(FB_BLANK_UNBLANK, mfd->fbi,
+ mfd->op_enable);
+ if (ret)
+ MSM_FB_INFO("msm_fb_resume: can't turn on display!\n");
+ }
+
+ return ret;
+}
+
+static struct platform_driver msm_fb_driver = {
+ .probe = msm_fb_probe,
+ .remove = msm_fb_remove,
+#ifndef CONFIG_HAS_EARLYSUSPEND
+ .suspend = msm_fb_suspend,
+ .resume = msm_fb_resume,
+#endif
+ .shutdown = NULL,
+ .driver = {
+ /* Driver name must match the device name added in platform.c. */
+ .name = "msm_fb",
+ },
+};
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void msmfb_early_suspend(struct early_suspend *h)
+{
+ struct msm_fb_data_type *mfd = container_of(h, struct msm_fb_data_type,
+ early_suspend);
+ msm_fb_suspend_sub(mfd);
+}
+
+static void msmfb_early_resume(struct early_suspend *h)
+{
+ struct msm_fb_data_type *mfd = container_of(h, struct msm_fb_data_type,
+ early_suspend);
+ msm_fb_resume_sub(mfd);
+}
+#endif
+
+void msm_fb_set_backlight(struct msm_fb_data_type *mfd, __u32 bkl_lvl, u32 save)
+{
+ struct msm_fb_panel_data *pdata;
+
+ pdata = (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data;
+
+ if ((pdata) && (pdata->set_backlight)) {
+ down(&mfd->sem);
+ if ((bkl_lvl != mfd->bl_level) || (!save)) {
+ u32 old_lvl;
+
+ old_lvl = mfd->bl_level;
+ mfd->bl_level = bkl_lvl;
+ pdata->set_backlight(mfd);
+
+ if (!save)
+ mfd->bl_level = old_lvl;
+ }
+ up(&mfd->sem);
+ }
+}
+
+static int msm_fb_blank_sub(int blank_mode, struct fb_info *info,
+ boolean op_enable)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+ struct msm_fb_panel_data *pdata = NULL;
+ int ret = 0;
+
+ if (!op_enable)
+ return -EPERM;
+
+ pdata = (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data;
+ if ((!pdata) || (!pdata->on) || (!pdata->off)) {
+ printk(KERN_ERR "msm_fb_blank_sub: no panel operation detected!\n");
+ return -ENODEV;
+ }
+
+ switch (blank_mode) {
+ case FB_BLANK_UNBLANK:
+ if (!mfd->panel_power_on) {
+ mdelay(100);
+ ret = pdata->on(mfd->pdev);
+ if (ret == 0) {
+ mfd->panel_power_on = TRUE;
+
+ msm_fb_set_backlight(mfd,
+ mfd->bl_level, 0);
+
+/* ToDo: possible conflict with android which doesn't expect sw refresher */
+/*
+ if (!mfd->hw_refresh)
+ {
+ if ((ret = msm_fb_resume_sw_refresher(mfd)) != 0)
+ {
+ MSM_FB_INFO("msm_fb_blank_sub: msm_fb_resume_sw_refresher failed = %d!\n",ret);
+ }
+ }
+*/
+ }
+ }
+ break;
+
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_NORMAL:
+ case FB_BLANK_POWERDOWN:
+ default:
+ if (mfd->panel_power_on) {
+ int curr_pwr_state;
+
+ mfd->op_enable = FALSE;
+ curr_pwr_state = mfd->panel_power_on;
+ mfd->panel_power_on = FALSE;
+
+ mdelay(100);
+ ret = pdata->off(mfd->pdev);
+ if (ret)
+ mfd->panel_power_on = curr_pwr_state;
+
+ msm_fb_set_backlight(mfd, 0, 0);
+ mfd->op_enable = TRUE;
+ }
+ break;
+ }
+
+ return ret;
+}
+
+static void msm_fb_fillrect(struct fb_info *info,
+ const struct fb_fillrect *rect)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+ cfb_fillrect(info, rect);
+ if (!mfd->hw_refresh && (info->var.yoffset == 0) &&
+ !mfd->sw_currently_refreshing) {
+ struct fb_var_screeninfo var;
+
+ var = info->var;
+ var.reserved[0] = 0x54445055;
+ var.reserved[1] = (rect->dy << 16) | (rect->dx);
+ var.reserved[2] = ((rect->dy + rect->height) << 16) |
+ (rect->dx + rect->width);
+
+ msm_fb_pan_display(&var, info);
+ }
+}
+
+static void msm_fb_copyarea(struct fb_info *info,
+ const struct fb_copyarea *area)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+ cfb_copyarea(info, area);
+ if (!mfd->hw_refresh && (info->var.yoffset == 0) &&
+ !mfd->sw_currently_refreshing) {
+ struct fb_var_screeninfo var;
+
+ var = info->var;
+ var.reserved[0] = 0x54445055;
+ var.reserved[1] = (area->dy << 16) | (area->dx);
+ var.reserved[2] = ((area->dy + area->height) << 16) |
+ (area->dx + area->width);
+
+ msm_fb_pan_display(&var, info);
+ }
+}
+
+static void msm_fb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+ cfb_imageblit(info, image);
+ if (!mfd->hw_refresh && (info->var.yoffset == 0) &&
+ !mfd->sw_currently_refreshing) {
+ struct fb_var_screeninfo var;
+
+ var = info->var;
+ var.reserved[0] = 0x54445055;
+ var.reserved[1] = (image->dy << 16) | (image->dx);
+ var.reserved[2] = ((image->dy + image->height) << 16) |
+ (image->dx + image->width);
+
+ msm_fb_pan_display(&var, info);
+ }
+}
+
+static int msm_fb_blank(int blank_mode, struct fb_info *info)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+ return msm_fb_blank_sub(blank_mode, info, mfd->op_enable);
+}
+
+static int msm_fb_set_lut(struct fb_cmap *cmap, struct fb_info *info)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+ if (!mfd->lut_update)
+ return -ENODEV;
+
+ mfd->lut_update(info, cmap);
+ return 0;
+}
+
+/*
+ * Custom Framebuffer mmap() function for MSM driver.
+ * Differs from standard mmap() function by allowing for customized
+ * page-protection.
+ */
+static int msm_fb_mmap(struct fb_info *info, struct vm_area_struct * vma)
+{
+ /* Get frame buffer memory range. */
+ unsigned long start = info->fix.smem_start;
+ u32 len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.smem_len);
+ unsigned long off = vma->vm_pgoff << PAGE_SHIFT;
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+ if (off >= len) {
+ /* memory mapped io */
+ off -= len;
+ if (info->var.accel_flags) {
+ mutex_unlock(&info->lock);
+ return -EINVAL;
+ }
+ start = info->fix.mmio_start;
+ len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.mmio_len);
+ }
+
+ /* Set VM flags. */
+ start &= PAGE_MASK;
+ if ((vma->vm_end - vma->vm_start + off) > len)
+ return -EINVAL;
+ off += start;
+ vma->vm_pgoff = off >> PAGE_SHIFT;
+ /* This is an IO map - tell maydump to skip this VMA */
+ vma->vm_flags |= VM_IO | VM_RESERVED;
+
+ /* Set VM page protection */
+ if (mfd->mdp_fb_page_protection == MDP_FB_PAGE_PROTECTION_WRITECOMBINE)
+ vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+ else if (mfd->mdp_fb_page_protection ==
+ MDP_FB_PAGE_PROTECTION_WRITETHROUGHCACHE)
+ vma->vm_page_prot = pgprot_writethroughcache(vma->vm_page_prot);
+ else if (mfd->mdp_fb_page_protection ==
+ MDP_FB_PAGE_PROTECTION_WRITEBACKCACHE)
+ vma->vm_page_prot = pgprot_writebackcache(vma->vm_page_prot);
+ else if (mfd->mdp_fb_page_protection ==
+ MDP_FB_PAGE_PROTECTION_WRITEBACKWACACHE)
+ vma->vm_page_prot = pgprot_writebackwacache(vma->vm_page_prot);
+ else
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+ /* Remap the frame buffer I/O range */
+ if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot))
+ return -EAGAIN;
+
+ return 0;
+}
+
+static struct fb_ops msm_fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_open = msm_fb_open,
+ .fb_release = msm_fb_release,
+ .fb_read = NULL,
+ .fb_write = NULL,
+ .fb_cursor = NULL,
+ .fb_check_var = msm_fb_check_var, /* vinfo check */
+ .fb_set_par = msm_fb_set_par, /* set the video mode according to info->var */
+ .fb_setcolreg = NULL, /* set color register */
+ .fb_blank = msm_fb_blank, /* blank display */
+ .fb_pan_display = msm_fb_pan_display, /* pan display */
+ .fb_fillrect = msm_fb_fillrect, /* Draws a rectangle */
+ .fb_copyarea = msm_fb_copyarea, /* Copy data from area to another */
+ .fb_imageblit = msm_fb_imageblit, /* Draws a image to the display */
+ .fb_rotate = NULL,
+ .fb_sync = NULL, /* wait for blit idle, optional */
+ .fb_ioctl = msm_fb_ioctl, /* perform fb specific ioctl (optional) */
+ .fb_mmap = msm_fb_mmap,
+};
+
+static int msm_fb_register(struct msm_fb_data_type *mfd)
+{
+ int ret = -ENODEV;
+ int bpp;
+ struct msm_panel_info *panel_info = &mfd->panel_info;
+ struct fb_info *fbi = mfd->fbi;
+ struct fb_fix_screeninfo *fix;
+ struct fb_var_screeninfo *var;
+ int *id;
+ int fbram_offset;
+
+ /*
+ * fb info initialization
+ */
+ fix = &fbi->fix;
+ var = &fbi->var;
+
+ fix->type_aux = 0; /* if type == FB_TYPE_INTERLEAVED_PLANES */
+ fix->visual = FB_VISUAL_TRUECOLOR; /* True Color */
+ fix->ywrapstep = 0; /* No support */
+ fix->mmio_start = 0; /* No MMIO Address */
+ fix->mmio_len = 0; /* No MMIO Address */
+ fix->accel = FB_ACCEL_NONE;/* FB_ACCEL_MSM needes to be added in fb.h */
+
+ var->xoffset = 0, /* Offset from virtual to visible */
+ var->yoffset = 0, /* resolution */
+ var->grayscale = 0, /* No graylevels */
+ var->nonstd = 0, /* standard pixel format */
+ var->activate = FB_ACTIVATE_VBL, /* activate it at vsync */
+ var->height = -1, /* height of picture in mm */
+ var->width = -1, /* width of picture in mm */
+ var->accel_flags = 0, /* acceleration flags */
+ var->sync = 0, /* see FB_SYNC_* */
+ var->rotate = 0, /* angle we rotate counter clockwise */
+ mfd->op_enable = FALSE;
+
+ switch (mfd->fb_imgType) {
+ case MDP_RGB_565:
+ fix->type = FB_TYPE_PACKED_PIXELS;
+ fix->xpanstep = 1;
+ fix->ypanstep = 1;
+ var->vmode = FB_VMODE_NONINTERLACED;
+ var->blue.offset = 0;
+ var->green.offset = 5;
+ var->red.offset = 11;
+ var->blue.length = 5;
+ var->green.length = 6;
+ var->red.length = 5;
+ var->blue.msb_right = 0;
+ var->green.msb_right = 0;
+ var->red.msb_right = 0;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ bpp = 2;
+ break;
+
+ case MDP_RGB_888:
+ fix->type = FB_TYPE_PACKED_PIXELS;
+ fix->xpanstep = 1;
+ fix->ypanstep = 1;
+ var->vmode = FB_VMODE_NONINTERLACED;
+ var->blue.offset = 0;
+ var->green.offset = 8;
+ var->red.offset = 16;
+ var->blue.length = 8;
+ var->green.length = 8;
+ var->red.length = 8;
+ var->blue.msb_right = 0;
+ var->green.msb_right = 0;
+ var->red.msb_right = 0;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ bpp = 3;
+ break;
+
+ case MDP_ARGB_8888:
+ fix->type = FB_TYPE_PACKED_PIXELS;
+ fix->xpanstep = 1;
+ fix->ypanstep = 1;
+ var->vmode = FB_VMODE_NONINTERLACED;
+ var->blue.offset = 0;
+ var->green.offset = 8;
+ var->red.offset = 16;
+ var->blue.length = 8;
+ var->green.length = 8;
+ var->red.length = 8;
+ var->blue.msb_right = 0;
+ var->green.msb_right = 0;
+ var->red.msb_right = 0;
+ var->transp.offset = 24;
+ var->transp.length = 8;
+ bpp = 3;
+ break;
+
+ case MDP_YCRYCB_H2V1:
+ /* ToDo: need to check TV-Out YUV422i framebuffer format */
+ /* we might need to create new type define */
+ fix->type = FB_TYPE_INTERLEAVED_PLANES;
+ fix->xpanstep = 2;
+ fix->ypanstep = 1;
+ var->vmode = FB_VMODE_NONINTERLACED;
+
+ /* how about R/G/B offset? */
+ var->blue.offset = 0;
+ var->green.offset = 5;
+ var->red.offset = 11;
+ var->blue.length = 5;
+ var->green.length = 6;
+ var->red.length = 5;
+ var->blue.msb_right = 0;
+ var->green.msb_right = 0;
+ var->red.msb_right = 0;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ bpp = 2;
+ break;
+
+ default:
+ MSM_FB_ERR("msm_fb_init: fb %d unkown image type!\n",
+ mfd->index);
+ return ret;
+ }
+
+ /* The adreno GPU hardware requires that the pitch be aligned to
+ 32 pixels for color buffers, so for the cases where the GPU
+ is writing directly to fb0, the framebuffer pitch
+ also needs to be 32 pixel aligned */
+
+ if (mfd->index == 0)
+ fix->line_length = ALIGN(panel_info->xres * bpp, 32);
+ else
+ fix->line_length = panel_info->xres * bpp;
+
+ fix->smem_len = fix->line_length * panel_info->yres * mfd->fb_page;
+
+ mfd->var_xres = panel_info->xres;
+ mfd->var_yres = panel_info->yres;
+
+ var->pixclock = mfd->panel_info.clk_rate;
+ mfd->var_pixclock = var->pixclock;
+
+ var->xres = panel_info->xres;
+ var->yres = panel_info->yres;
+ var->xres_virtual = panel_info->xres;
+ var->yres_virtual = panel_info->yres * mfd->fb_page;
+ var->bits_per_pixel = bpp * 8, /* FrameBuffer color depth */
+ /*
+ * id field for fb app
+ */
+ id = (int *)&mfd->panel;
+
+#if defined(CONFIG_FB_MSM_MDP22)
+ snprintf(fix->id, sizeof(fix->id), "msmfb22_%x", (__u32) *id);
+#elif defined(CONFIG_FB_MSM_MDP30)
+ snprintf(fix->id, sizeof(fix->id), "msmfb30_%x", (__u32) *id);
+#elif defined(CONFIG_FB_MSM_MDP31)
+ snprintf(fix->id, sizeof(fix->id), "msmfb31_%x", (__u32) *id);
+#elif defined(CONFIG_FB_MSM_MDP40)
+ snprintf(fix->id, sizeof(fix->id), "msmfb40_%x", (__u32) *id);
+#else
+ error CONFIG_FB_MSM_MDP undefined !
+#endif
+ fbi->fbops = &msm_fb_ops;
+ fbi->flags = FBINFO_FLAG_DEFAULT;
+ fbi->pseudo_palette = msm_fb_pseudo_palette;
+
+ mfd->ref_cnt = 0;
+ mfd->sw_currently_refreshing = FALSE;
+ mfd->sw_refreshing_enable = TRUE;
+ mfd->panel_power_on = FALSE;
+
+ mfd->pan_waiting = FALSE;
+ init_completion(&mfd->pan_comp);
+ init_completion(&mfd->refresher_comp);
+ init_MUTEX(&mfd->sem);
+
+ fbram_offset = PAGE_ALIGN((int)fbram)-(int)fbram;
+ fbram += fbram_offset;
+ fbram_phys += fbram_offset;
+ fbram_size -= fbram_offset;
+
+ if (fbram_size < fix->smem_len) {
+ printk(KERN_ERR "error: no more framebuffer memory!\n");
+ return -ENOMEM;
+ }
+
+ fbi->screen_base = fbram;
+ fbi->fix.smem_start = (unsigned long)fbram_phys;
+
+ memset(fbi->screen_base, 0x0, fix->smem_len);
+
+ mfd->op_enable = TRUE;
+ mfd->panel_power_on = FALSE;
+
+ /* cursor memory allocation */
+ if (mfd->cursor_update) {
+ mfd->cursor_buf = dma_alloc_coherent(NULL,
+ MDP_CURSOR_SIZE,
+ (dma_addr_t *) &mfd->cursor_buf_phys,
+ GFP_KERNEL);
+ if (!mfd->cursor_buf)
+ mfd->cursor_update = 0;
+ }
+
+ if (mfd->lut_update) {
+ ret = fb_alloc_cmap(&fbi->cmap, 256, 0);
+ if (ret)
+ printk(KERN_ERR "%s: fb_alloc_cmap() failed!\n",
+ __func__);
+ }
+
+ if (register_framebuffer(fbi) < 0) {
+ if (mfd->lut_update)
+ fb_dealloc_cmap(&fbi->cmap);
+
+ if (mfd->cursor_buf)
+ dma_free_coherent(NULL,
+ MDP_CURSOR_SIZE,
+ mfd->cursor_buf,
+ (dma_addr_t) mfd->cursor_buf_phys);
+
+ mfd->op_enable = FALSE;
+ return -EPERM;
+ }
+
+ fbram += fix->smem_len;
+ fbram_phys += fix->smem_len;
+ fbram_size -= fix->smem_len;
+
+ MSM_FB_INFO
+ ("FrameBuffer[%d] %dx%d size=%d bytes is registered successfully!\n",
+ mfd->index, fbi->var.xres, fbi->var.yres, fbi->fix.smem_len);
+
+#ifdef CONFIG_FB_MSM_LOGO
+ if (!load_565rle_image(INIT_IMAGE_FILE)) ; /* Flip buffer */
+#endif
+ ret = 0;
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+ mfd->early_suspend.suspend = msmfb_early_suspend;
+ mfd->early_suspend.resume = msmfb_early_resume;
+ mfd->early_suspend.level = EARLY_SUSPEND_LEVEL_DISABLE_FB - 2;
+ register_early_suspend(&mfd->early_suspend);
+#endif
+
+#ifdef MSM_FB_ENABLE_DBGFS
+ {
+ struct dentry *root;
+ struct dentry *sub_dir;
+ char sub_name[2];
+
+ root = msm_fb_get_debugfs_root();
+ if (root != NULL) {
+ sub_name[0] = (char)(mfd->index + 0x30);
+ sub_name[1] = '\0';
+ sub_dir = debugfs_create_dir(sub_name, root);
+ } else {
+ sub_dir = NULL;
+ }
+
+ mfd->sub_dir = sub_dir;
+
+ if (sub_dir) {
+ msm_fb_debugfs_file_create(sub_dir, "op_enable",
+ (u32 *) &mfd->op_enable);
+ msm_fb_debugfs_file_create(sub_dir, "panel_power_on",
+ (u32 *) &mfd->
+ panel_power_on);
+ msm_fb_debugfs_file_create(sub_dir, "ref_cnt",
+ (u32 *) &mfd->ref_cnt);
+ msm_fb_debugfs_file_create(sub_dir, "fb_imgType",
+ (u32 *) &mfd->fb_imgType);
+ msm_fb_debugfs_file_create(sub_dir,
+ "sw_currently_refreshing",
+ (u32 *) &mfd->
+ sw_currently_refreshing);
+ msm_fb_debugfs_file_create(sub_dir,
+ "sw_refreshing_enable",
+ (u32 *) &mfd->
+ sw_refreshing_enable);
+
+ msm_fb_debugfs_file_create(sub_dir, "xres",
+ (u32 *) &mfd->panel_info.
+ xres);
+ msm_fb_debugfs_file_create(sub_dir, "yres",
+ (u32 *) &mfd->panel_info.
+ yres);
+ msm_fb_debugfs_file_create(sub_dir, "bpp",
+ (u32 *) &mfd->panel_info.
+ bpp);
+ msm_fb_debugfs_file_create(sub_dir, "type",
+ (u32 *) &mfd->panel_info.
+ type);
+ msm_fb_debugfs_file_create(sub_dir, "wait_cycle",
+ (u32 *) &mfd->panel_info.
+ wait_cycle);
+ msm_fb_debugfs_file_create(sub_dir, "pdest",
+ (u32 *) &mfd->panel_info.
+ pdest);
+ msm_fb_debugfs_file_create(sub_dir, "backbuff",
+ (u32 *) &mfd->panel_info.
+ fb_num);
+ msm_fb_debugfs_file_create(sub_dir, "clk_rate",
+ (u32 *) &mfd->panel_info.
+ clk_rate);
+ msm_fb_debugfs_file_create(sub_dir, "frame_count",
+ (u32 *) &mfd->panel_info.
+ frame_count);
+
+
+ switch (mfd->dest) {
+ case DISPLAY_LCD:
+ msm_fb_debugfs_file_create(sub_dir,
+ "vsync_enable",
+ (u32 *)&mfd->panel_info.lcd.vsync_enable);
+ msm_fb_debugfs_file_create(sub_dir,
+ "refx100",
+ (u32 *) &mfd->panel_info.lcd. refx100);
+ msm_fb_debugfs_file_create(sub_dir,
+ "v_back_porch",
+ (u32 *) &mfd->panel_info.lcd.v_back_porch);
+ msm_fb_debugfs_file_create(sub_dir,
+ "v_front_porch",
+ (u32 *) &mfd->panel_info.lcd.v_front_porch);
+ msm_fb_debugfs_file_create(sub_dir,
+ "v_pulse_width",
+ (u32 *) &mfd->panel_info.lcd.v_pulse_width);
+ msm_fb_debugfs_file_create(sub_dir,
+ "hw_vsync_mode",
+ (u32 *) &mfd->panel_info.lcd.hw_vsync_mode);
+ msm_fb_debugfs_file_create(sub_dir,
+ "vsync_notifier_period", (u32 *)
+ &mfd->panel_info.lcd.vsync_notifier_period);
+ break;
+
+ case DISPLAY_LCDC:
+ msm_fb_debugfs_file_create(sub_dir,
+ "h_back_porch",
+ (u32 *) &mfd->panel_info.lcdc.h_back_porch);
+ msm_fb_debugfs_file_create(sub_dir,
+ "h_front_porch",
+ (u32 *) &mfd->panel_info.lcdc.h_front_porch);
+ msm_fb_debugfs_file_create(sub_dir,
+ "h_pulse_width",
+ (u32 *) &mfd->panel_info.lcdc.h_pulse_width);
+ msm_fb_debugfs_file_create(sub_dir,
+ "v_back_porch",
+ (u32 *) &mfd->panel_info.lcdc.v_back_porch);
+ msm_fb_debugfs_file_create(sub_dir,
+ "v_front_porch",
+ (u32 *) &mfd->panel_info.lcdc.v_front_porch);
+ msm_fb_debugfs_file_create(sub_dir,
+ "v_pulse_width",
+ (u32 *) &mfd->panel_info.lcdc.v_pulse_width);
+ msm_fb_debugfs_file_create(sub_dir,
+ "border_clr",
+ (u32 *) &mfd->panel_info.lcdc.border_clr);
+ msm_fb_debugfs_file_create(sub_dir,
+ "underflow_clr",
+ (u32 *) &mfd->panel_info.lcdc.underflow_clr);
+ msm_fb_debugfs_file_create(sub_dir,
+ "hsync_skew",
+ (u32 *) &mfd->panel_info.lcdc.hsync_skew);
+ break;
+
+ default:
+ break;
+ }
+ }
+ }
+#endif /* MSM_FB_ENABLE_DBGFS */
+
+ return ret;
+}
+
+static int msm_fb_open(struct fb_info *info, int user)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+ if (!mfd->ref_cnt) {
+ mdp_set_dma_pan_info(info, NULL, TRUE);
+
+ if (msm_fb_blank_sub(FB_BLANK_UNBLANK, info, mfd->op_enable)) {
+ printk(KERN_ERR "msm_fb_open: can't turn on display!\n");
+ return -1;
+ }
+ }
+
+ mfd->ref_cnt++;
+ return 0;
+}
+
+static int msm_fb_release(struct fb_info *info, int user)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+ int ret = 0;
+
+ if (!mfd->ref_cnt) {
+ MSM_FB_INFO("msm_fb_release: try to close unopened fb %d!\n",
+ mfd->index);
+ return -EINVAL;
+ }
+
+ mfd->ref_cnt--;
+
+ if (!mfd->ref_cnt) {
+ if ((ret =
+ msm_fb_blank_sub(FB_BLANK_POWERDOWN, info,
+ mfd->op_enable)) != 0) {
+ printk(KERN_ERR "msm_fb_release: can't turn off display!\n");
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+DECLARE_MUTEX(msm_fb_pan_sem);
+
+static int msm_fb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct mdp_dirty_region dirty;
+ struct mdp_dirty_region *dirtyPtr = NULL;
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+ if ((!mfd->op_enable) || (!mfd->panel_power_on))
+ return -EPERM;
+
+ if (var->xoffset > (info->var.xres_virtual - info->var.xres))
+ return -EINVAL;
+
+ if (var->yoffset > (info->var.yres_virtual - info->var.yres))
+ return -EINVAL;
+
+ if (info->fix.xpanstep)
+ info->var.xoffset =
+ (var->xoffset / info->fix.xpanstep) * info->fix.xpanstep;
+
+ if (info->fix.ypanstep)
+ info->var.yoffset =
+ (var->yoffset / info->fix.ypanstep) * info->fix.ypanstep;
+
+ /* "UPDT" */
+ if (var->reserved[0] == 0x54445055) {
+ dirty.xoffset = var->reserved[1] & 0xffff;
+ dirty.yoffset = (var->reserved[1] >> 16) & 0xffff;
+
+ if ((var->reserved[2] & 0xffff) <= dirty.xoffset)
+ return -EINVAL;
+ if (((var->reserved[2] >> 16) & 0xffff) <= dirty.yoffset)
+ return -EINVAL;
+
+ dirty.width = (var->reserved[2] & 0xffff) - dirty.xoffset;
+ dirty.height =
+ ((var->reserved[2] >> 16) & 0xffff) - dirty.yoffset;
+ info->var.yoffset = var->yoffset;
+
+ if (dirty.xoffset < 0)
+ return -EINVAL;
+
+ if (dirty.yoffset < 0)
+ return -EINVAL;
+
+ if ((dirty.xoffset + dirty.width) > info->var.xres)
+ return -EINVAL;
+
+ if ((dirty.yoffset + dirty.height) > info->var.yres)
+ return -EINVAL;
+
+ if ((dirty.width <= 0) || (dirty.height <= 0))
+ return -EINVAL;
+
+ dirtyPtr = &dirty;
+ }
+
+ /* Flip */
+ /* A constant value is used to indicate that we should change the DMA
+ output buffer instead of just panning */
+
+ if (var->reserved[0] == 0x466c6970) {
+ unsigned long length, address;
+ struct file *p_src_file;
+ struct mdp_img imgdata;
+ int bpp;
+
+ if (mfd->allow_set_offset) {
+ imgdata.memory_id = var->reserved[1];
+ imgdata.priv = var->reserved[2];
+
+ /* If there is no memory ID then we want to reset back
+ to the original fb visibility */
+ if (var->reserved[1]) {
+ if (var->reserved[4] == MDP_BLIT_SRC_GEM) {
+ panic("waaaaaaaaaaaaaah");
+ if ( /*get_gem_img(&imgdata,
+ (unsigned long *) &address,
+ &length)*/ -1 < 0) {
+ return -1;
+ }
+ } else {
+ /*get_img(&imgdata, info, &address,
+ &length, &p_src_file);*/
+ panic("waaaaaah");
+ }
+ mfd->ibuf.visible_swapped = TRUE;
+ } else {
+ /* Flip back to the original address
+ adjusted for xoffset and yoffset */
+
+ bpp = info->var.bits_per_pixel / 8;
+ address = (unsigned long) info->fix.smem_start;
+ address += info->var.xoffset * bpp +
+ info->var.yoffset * info->fix.line_length;
+
+ mfd->ibuf.visible_swapped = FALSE;
+ }
+
+ mdp_set_offset_info(info, address,
+ (var->activate == FB_ACTIVATE_VBL));
+
+ mfd->dma_fnc(mfd);
+ return 0;
+ } else
+ return -EINVAL;
+ }
+
+ down(&msm_fb_pan_sem);
+ mdp_set_dma_pan_info(info, dirtyPtr,
+ (var->activate == FB_ACTIVATE_VBL));
+ mdp_dma_pan_update(info);
+ up(&msm_fb_pan_sem);
+
+ ++mfd->panel_info.frame_count;
+ return 0;
+}
+
+static int msm_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+ if (var->rotate != FB_ROTATE_UR)
+ return -EINVAL;
+ if (var->grayscale != info->var.grayscale)
+ return -EINVAL;
+
+ switch (var->bits_per_pixel) {
+ case 16:
+ if ((var->green.offset != 5) ||
+ !((var->blue.offset == 11)
+ || (var->blue.offset == 0)) ||
+ !((var->red.offset == 11)
+ || (var->red.offset == 0)) ||
+ (var->blue.length != 5) ||
+ (var->green.length != 6) ||
+ (var->red.length != 5) ||
+ (var->blue.msb_right != 0) ||
+ (var->green.msb_right != 0) ||
+ (var->red.msb_right != 0) ||
+ (var->transp.offset != 0) ||
+ (var->transp.length != 0))
+ return -EINVAL;
+ break;
+
+ case 24:
+ if ((var->blue.offset != 0) ||
+ (var->green.offset != 8) ||
+ (var->red.offset != 16) ||
+ (var->blue.length != 8) ||
+ (var->green.length != 8) ||
+ (var->red.length != 8) ||
+ (var->blue.msb_right != 0) ||
+ (var->green.msb_right != 0) ||
+ (var->red.msb_right != 0) ||
+ !(((var->transp.offset == 0) &&
+ (var->transp.length == 0)) ||
+ ((var->transp.offset == 24) &&
+ (var->transp.length == 8))))
+ return -EINVAL;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ if ((var->xres_virtual <= 0) || (var->yres_virtual <= 0))
+ return -EINVAL;
+
+ if (info->fix.smem_len <
+ (var->xres_virtual*var->yres_virtual*(var->bits_per_pixel/8)))
+ return -EINVAL;
+
+ if ((var->xres == 0) || (var->yres == 0))
+ return -EINVAL;
+
+ if ((var->xres > mfd->panel_info.xres) ||
+ (var->yres > mfd->panel_info.yres))
+ return -EINVAL;
+
+ if (var->xoffset > (var->xres_virtual - var->xres))
+ return -EINVAL;
+
+ if (var->yoffset > (var->yres_virtual - var->yres))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int msm_fb_set_par(struct fb_info *info)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+ struct fb_var_screeninfo *var = &info->var;
+ int old_imgType;
+ int blank = 0;
+
+ old_imgType = mfd->fb_imgType;
+ switch (var->bits_per_pixel) {
+ case 16:
+ if (var->red.offset == 0)
+ mfd->fb_imgType = MDP_BGR_565;
+ else
+ mfd->fb_imgType = MDP_RGB_565;
+ break;
+
+ case 24:
+ if ((var->transp.offset == 0) && (var->transp.length == 0))
+ mfd->fb_imgType = MDP_RGB_888;
+ else if ((var->transp.offset == 24) &&
+ (var->transp.length == 8)) {
+ mfd->fb_imgType = MDP_ARGB_8888;
+ info->var.bits_per_pixel = 32;
+ }
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ if ((mfd->var_pixclock != var->pixclock) ||
+ (mfd->hw_refresh && ((mfd->fb_imgType != old_imgType) ||
+ (mfd->var_pixclock != var->pixclock) ||
+ (mfd->var_xres != var->xres) ||
+ (mfd->var_yres != var->yres)))) {
+ mfd->var_xres = var->xres;
+ mfd->var_yres = var->yres;
+ mfd->var_pixclock = var->pixclock;
+ blank = 1;
+ }
+
+ if (blank) {
+ msm_fb_blank_sub(FB_BLANK_POWERDOWN, info, mfd->op_enable);
+ msm_fb_blank_sub(FB_BLANK_UNBLANK, info, mfd->op_enable);
+ }
+
+ return 0;
+}
+
+static int msm_fb_stop_sw_refresher(struct msm_fb_data_type *mfd)
+{
+ if (mfd->hw_refresh)
+ return -EPERM;
+
+ if (mfd->sw_currently_refreshing) {
+ down(&mfd->sem);
+ mfd->sw_currently_refreshing = FALSE;
+ up(&mfd->sem);
+
+ /* wait until the refresher finishes the last job */
+ wait_for_completion_killable(&mfd->refresher_comp);
+ }
+
+ return 0;
+}
+
+int msm_fb_resume_sw_refresher(struct msm_fb_data_type *mfd)
+{
+ boolean do_refresh;
+
+ if (mfd->hw_refresh)
+ return -EPERM;
+
+ down(&mfd->sem);
+ if ((!mfd->sw_currently_refreshing) && (mfd->sw_refreshing_enable)) {
+ do_refresh = TRUE;
+ mfd->sw_currently_refreshing = TRUE;
+ } else {
+ do_refresh = FALSE;
+ }
+ up(&mfd->sem);
+
+ if (do_refresh)
+ mdp_refresh_screen((unsigned long)mfd);
+
+ return 0;
+}
+
+void mdp_ppp_put_img(struct file *p_src_file, struct file *p_dst_file)
+{
+#ifdef CONFIG_ANDROID_PMEM
+ if (p_src_file)
+ put_pmem_file(p_src_file);
+ if (p_dst_file)
+ put_pmem_file(p_dst_file);
+#endif
+}
+
+int mdp_blit(struct fb_info *info, struct mdp_blit_req *req)
+{
+ int ret;
+ struct file *p_src_file = 0, *p_dst_file = 0;
+ if (unlikely(req->src_rect.h == 0 || req->src_rect.w == 0)) {
+ printk(KERN_ERR "mpd_ppp: src img of zero size!\n");
+ return -EINVAL;
+ }
+ if (unlikely(req->dst_rect.h == 0 || req->dst_rect.w == 0))
+ return 0;
+
+ ret = mdp_ppp_blit(info, req, &p_src_file, &p_dst_file);
+ mdp_ppp_put_img(p_src_file, p_dst_file);
+ return ret;
+}
+
+typedef void (*msm_dma_barrier_function_pointer) (void *, size_t);
+
+static inline void msm_fb_dma_barrier_for_rect(struct fb_info *info,
+ struct mdp_img *img, struct mdp_rect *rect,
+ msm_dma_barrier_function_pointer dma_barrier_fp
+ )
+{
+ /*
+ * Compute the start and end addresses of the rectangles.
+ * NOTE: As currently implemented, the data between
+ * the end of one row and the start of the next is
+ * included in the address range rather than
+ * doing multiple calls for each row.
+ */
+
+ char * const pmem_start = info->screen_base;
+/* int bytes_per_pixel = mdp_get_bytes_per_pixel(img->format);
+ unsigned long start = (unsigned long)pmem_start + img->offset +
+ (img->width * rect->y + rect->x) * bytes_per_pixel;
+ size_t size = ((rect->h - 1) * img->width + rect->w) * bytes_per_pixel;
+ (*dma_barrier_fp) ((void *) start, size);
+*/
+ panic("waaaaah");
+}
+
+static inline void msm_dma_nc_pre(void)
+{
+ dmb();
+}
+static inline void msm_dma_wt_pre(void)
+{
+ dmb();
+}
+static inline void msm_dma_todevice_wb_pre(void *start, size_t size)
+{
+ #warning this
+// dma_cache_pre_ops(start, size, DMA_TO_DEVICE);
+}
+
+static inline void msm_dma_fromdevice_wb_pre(void *start, size_t size)
+{
+ #warning this
+// dma_cache_pre_ops(start, size, DMA_FROM_DEVICE);
+}
+
+static inline void msm_dma_nc_post(void)
+{
+ dmb();
+}
+
+static inline void msm_dma_fromdevice_wt_post(void *start, size_t size)
+{
+ #warning this
+// dma_cache_post_ops(start, size, DMA_FROM_DEVICE);
+}
+
+static inline void msm_dma_todevice_wb_post(void *start, size_t size)
+{
+ #warning this
+// dma_cache_post_ops(start, size, DMA_TO_DEVICE);
+}
+
+static inline void msm_dma_fromdevice_wb_post(void *start, size_t size)
+{
+ #warning this
+// dma_cache_post_ops(start, size, DMA_FROM_DEVICE);
+}
+
+/*
+ * Do the write barriers required to guarantee data is committed to RAM
+ * (from CPU cache or internal buffers) before a DMA operation starts.
+ * NOTE: As currently implemented, the data between
+ * the end of one row and the start of the next is
+ * included in the address range rather than
+ * doing multiple calls for each row.
+*/
+static void msm_fb_ensure_memory_coherency_before_dma(struct fb_info *info,
+ struct mdp_blit_req *req_list,
+ int req_list_count)
+{
+#ifdef CONFIG_ARCH_QSD8X50
+ int i;
+
+ /*
+ * Normally, do the requested barriers for each address
+ * range that corresponds to a rectangle.
+ *
+ * But if at least one write barrier is requested for data
+ * going to or from the device but no address range is
+ * needed for that barrier, then do the barrier, but do it
+ * only once, no matter how many requests there are.
+ */
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+ switch (mfd->mdp_fb_page_protection) {
+ default:
+ case MDP_FB_PAGE_PROTECTION_NONCACHED:
+ case MDP_FB_PAGE_PROTECTION_WRITECOMBINE:
+ /*
+ * The following barrier is only done at most once,
+ * since further calls would be redundant.
+ */
+ for (i = 0; i < req_list_count; i++) {
+ if (!(req_list[i].flags
+ & MDP_NO_DMA_BARRIER_START)) {
+ msm_dma_nc_pre();
+ break;
+ }
+ }
+ break;
+
+ case MDP_FB_PAGE_PROTECTION_WRITETHROUGHCACHE:
+ /*
+ * The following barrier is only done at most once,
+ * since further calls would be redundant.
+ */
+ for (i = 0; i < req_list_count; i++) {
+ if (!(req_list[i].flags
+ & MDP_NO_DMA_BARRIER_START)) {
+ msm_dma_wt_pre();
+ break;
+ }
+ }
+ break;
+
+ case MDP_FB_PAGE_PROTECTION_WRITEBACKCACHE:
+ case MDP_FB_PAGE_PROTECTION_WRITEBACKWACACHE:
+ for (i = 0; i < req_list_count; i++) {
+ if (!(req_list[i].flags &
+ MDP_NO_DMA_BARRIER_START)) {
+
+ msm_fb_dma_barrier_for_rect(info,
+ &(req_list[i].src),
+ &(req_list[i].src_rect),
+ msm_dma_todevice_wb_pre
+ );
+
+ msm_fb_dma_barrier_for_rect(info,
+ &(req_list[i].dst),
+ &(req_list[i].dst_rect),
+ msm_dma_todevice_wb_pre
+ );
+ }
+ }
+ break;
+ }
+#else
+ dmb();
+#endif
+}
+
+
+/*
+ * Do the write barriers required to guarantee data will be re-read from RAM by
+ * the CPU after a DMA operation ends.
+ * NOTE: As currently implemented, the data between
+ * the end of one row and the start of the next is
+ * included in the address range rather than
+ * doing multiple calls for each row.
+*/
+static void msm_fb_ensure_memory_coherency_after_dma(struct fb_info *info,
+ struct mdp_blit_req *req_list,
+ int req_list_count)
+{
+#ifdef CONFIG_ARCH_QSD8X50
+ int i;
+
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+ switch (mfd->mdp_fb_page_protection) {
+ default:
+ case MDP_FB_PAGE_PROTECTION_NONCACHED:
+ case MDP_FB_PAGE_PROTECTION_WRITECOMBINE:
+ /*
+ * The following barrier is only done at most once,
+ * since further calls would be redundant.
+ */
+ for (i = 0; i < req_list_count; i++) {
+ if (!(req_list[i].flags
+ & MDP_NO_DMA_BARRIER_END)) {
+ msm_dma_nc_post();
+ break;
+ }
+ }
+ break;
+
+ case MDP_FB_PAGE_PROTECTION_WRITETHROUGHCACHE:
+ for (i = 0; i < req_list_count; i++) {
+ if (!(req_list[i].flags &
+ MDP_NO_DMA_BARRIER_END)) {
+
+ msm_fb_dma_barrier_for_rect(info,
+ &(req_list[i].dst),
+ &(req_list[i].dst_rect),
+ msm_dma_fromdevice_wt_post
+ );
+ }
+ }
+ break;
+ case MDP_FB_PAGE_PROTECTION_WRITEBACKCACHE:
+ case MDP_FB_PAGE_PROTECTION_WRITEBACKWACACHE:
+ for (i = 0; i < req_list_count; i++) {
+ if (!(req_list[i].flags &
+ MDP_NO_DMA_BARRIER_END)) {
+
+ msm_fb_dma_barrier_for_rect(info,
+ &(req_list[i].dst),
+ &(req_list[i].dst_rect),
+ msm_dma_fromdevice_wb_post
+ );
+ }
+ }
+ break;
+ }
+#else
+ dmb();
+#endif
+}
+
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+void msm_fb_ensure_mem_coherency_after_dma(struct fb_info *info,
+ struct mdp_blit_req *req_list, int req_list_count)
+{
+ BUG_ON(!info);
+
+ /*
+ * Ensure that CPU cache and other internal CPU state is
+ * updated to reflect any change in memory modified by MDP blit
+ * DMA.
+ */
+ msm_fb_ensure_memory_coherency_after_dma(info,
+ req_list, req_list_count);
+}
+
+static int msmfb_async_blit(struct fb_info *info, void __user *p)
+{
+ /*
+ * CAUTION: The names of the struct types intentionally *DON'T* match
+ * the names of the variables declared -- they appear to be swapped.
+ * Read the code carefully and you should see that the variable names
+ * make sense.
+ */
+ const int MAX_LIST_WINDOW = 16;
+ struct mdp_blit_req req_list[MAX_LIST_WINDOW];
+ struct mdp_blit_req_list req_list_header;
+
+ int count, i, req_list_count;
+
+ /* Get the count size for the total BLIT request. */
+ if (copy_from_user(&req_list_header, p, sizeof(req_list_header)))
+ return -EFAULT;
+ p += sizeof(req_list_header);
+ count = req_list_header.count;
+ while (count > 0) {
+ /*
+ * Access the requests through a narrow window to decrease copy
+ * overhead and make larger requests accessible to the
+ * coherency management code.
+ * NOTE: The window size is intended to be larger than the
+ * typical request size, but not require more than 2
+ * kbytes of stack storage.
+ */
+ req_list_count = count;
+ if (req_list_count > MAX_LIST_WINDOW)
+ req_list_count = MAX_LIST_WINDOW;
+ if (copy_from_user(&req_list, p,
+ sizeof(struct mdp_blit_req)*req_list_count))
+ return -EFAULT;
+
+ /*
+ * Ensure that any data CPU may have previously written to
+ * internal state (but not yet committed to memory) is
+ * guaranteed to be committed to memory now.
+ */
+ msm_fb_ensure_memory_coherency_before_dma(info,
+ req_list, req_list_count);
+
+ /*
+ * Do the blit DMA, if required -- returning early only if
+ * there is a failure.
+ */
+ for (i = 0; i < req_list_count; i++) {
+ if (!(req_list[i].flags & MDP_NO_BLIT)) {
+ int ret = 0;
+ struct mdp_ppp_djob *job = NULL;
+
+ if (unlikely(req_list[i].src_rect.h == 0 ||
+ req_list[i].src_rect.w == 0)) {
+ MSM_FB_ERR("mpd_ppp: "
+ "src img of zero size!\n");
+ return -EINVAL;
+ }
+
+ if (unlikely(req_list[i].dst_rect.h == 0 ||
+ req_list[i].dst_rect.w == 0))
+ continue;
+
+ /* create a new display job */
+ job = mdp_ppp_new_djob();
+ if (unlikely(!job))
+ return -ENOMEM;
+
+ job->info = info;
+ memcpy(&job->req, &req_list[i],
+ sizeof(struct mdp_blit_req));
+
+ /* Do the actual blit. */
+ ret = mdp_ppp_blit(info, &job->req,
+ &job->p_src_file, &job->p_dst_file);
+
+ /*
+ * Note that early returns don't guarantee
+ * memory coherency.
+ */
+ if (ret || mdp_ppp_get_ret_code()) {
+ mdp_ppp_clear_curr_djob();
+ return ret;
+ }
+ }
+ }
+
+ /* Go to next window of requests. */
+ count -= req_list_count;
+ p += sizeof(struct mdp_blit_req)*req_list_count;
+ }
+ return 0;
+}
+#else
+
+/*
+ * NOTE: The userspace issues blit operations in a sequence, the sequence
+ * start with a operation marked START and ends in an operation marked
+ * END. It is guranteed by the userspace that all the blit operations
+ * between START and END are only within the regions of areas designated
+ * by the START and END operations and that the userspace doesnt modify
+ * those areas. Hence it would be enough to perform barrier/cache operations
+ * only on the START and END operations.
+ */
+static int msmfb_blit(struct fb_info *info, void __user *p)
+{
+ /*
+ * CAUTION: The names of the struct types intentionally *DON'T* match
+ * the names of the variables declared -- they appear to be swapped.
+ * Read the code carefully and you should see that the variable names
+ * make sense.
+ */
+ const int MAX_LIST_WINDOW = 16;
+ struct mdp_blit_req req_list[MAX_LIST_WINDOW];
+ struct mdp_blit_req_list req_list_header;
+
+ int count, i, req_list_count;
+
+ /* Get the count size for the total BLIT request. */
+ if (copy_from_user(&req_list_header, p, sizeof(req_list_header)))
+ return -EFAULT;
+ p += sizeof(req_list_header);
+ count = req_list_header.count;
+ while (count > 0) {
+ /*
+ * Access the requests through a narrow window to decrease copy
+ * overhead and make larger requests accessible to the
+ * coherency management code.
+ * NOTE: The window size is intended to be larger than the
+ * typical request size, but not require more than 2
+ * kbytes of stack storage.
+ */
+ req_list_count = count;
+ if (req_list_count > MAX_LIST_WINDOW)
+ req_list_count = MAX_LIST_WINDOW;
+ if (copy_from_user(&req_list, p,
+ sizeof(struct mdp_blit_req)*req_list_count))
+ return -EFAULT;
+
+ /*
+ * Ensure that any data CPU may have previously written to
+ * internal state (but not yet committed to memory) is
+ * guaranteed to be committed to memory now.
+ */
+ msm_fb_ensure_memory_coherency_before_dma(info,
+ req_list, req_list_count);
+
+ /*
+ * Do the blit DMA, if required -- returning early only if
+ * there is a failure.
+ */
+ for (i = 0; i < req_list_count; i++) {
+ if (!(req_list[i].flags & MDP_NO_BLIT)) {
+ /* Do the actual blit. */
+ int ret = mdp_blit(info, &(req_list[i]));
+
+ /*
+ * Note that early returns don't guarantee
+ * memory coherency.
+ */
+ if (ret)
+ return ret;
+ }
+ }
+
+ /*
+ * Ensure that CPU cache and other internal CPU state is
+ * updated to reflect any change in memory modified by MDP blit
+ * DMA.
+ */
+ msm_fb_ensure_memory_coherency_after_dma(info,
+ req_list,
+ req_list_count);
+
+ /* Go to next window of requests. */
+ count -= req_list_count;
+ p += sizeof(struct mdp_blit_req)*req_list_count;
+ }
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_FB_MSM_OVERLAY
+static int msmfb_overlay_get(struct fb_info *info, void __user *p)
+{
+ struct mdp_overlay req;
+ int ret;
+
+ if (copy_from_user(&req, p, sizeof(req)))
+ return -EFAULT;
+
+ ret = mdp4_overlay_get(info, &req);
+ if (ret) {
+ printk(KERN_ERR "%s: ioctl failed \n",
+ __func__);
+ return ret;
+ }
+ if (copy_to_user(p, &req, sizeof(req))) {
+ printk(KERN_ERR "%s: copy2user failed \n",
+ __func__);
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int msmfb_overlay_set(struct fb_info *info, void __user *p)
+{
+ struct mdp_overlay req;
+ int ret;
+
+ if (copy_from_user(&req, p, sizeof(req)))
+ return -EFAULT;
+
+ ret = mdp4_overlay_set(info, &req);
+ if (ret) {
+ printk(KERN_ERR "%s:ioctl failed \n",
+ __func__);
+ return ret;
+ }
+
+ if (copy_to_user(p, &req, sizeof(req))) {
+ printk(KERN_ERR "%s: copy2user failed \n",
+ __func__);
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int msmfb_overlay_unset(struct fb_info *info, unsigned long *argp)
+{
+ int ret, ndx;
+
+ ret = copy_from_user(&ndx, argp, sizeof(ndx));
+ if (ret) {
+ printk(KERN_ERR "%s:msmfb_overlay_unset ioctl failed \n",
+ __func__);
+ return ret;
+ }
+
+ return mdp4_overlay_unset(info, ndx);
+}
+
+static int msmfb_overlay_play(struct fb_info *info, unsigned long *argp)
+{
+ int ret;
+ struct msmfb_overlay_data req;
+ struct file *p_src_file = 0;
+
+ ret = copy_from_user(&req, argp, sizeof(req));
+ if (ret) {
+ printk(KERN_ERR "%s:msmfb_overlay_play ioctl failed \n",
+ __func__);
+ return ret;
+ }
+
+ ret = mdp4_overlay_play(info, &req, &p_src_file);
+
+ if (p_src_file)
+ put_pmem_file(p_src_file);
+
+ return ret;
+}
+
+#endif
+
+DECLARE_MUTEX(msm_fb_ioctl_ppp_sem);
+DEFINE_MUTEX(msm_fb_ioctl_lut_sem);
+DEFINE_MUTEX(msm_fb_ioctl_hist_sem);
+
+/* Set color conversion matrix from user space */
+
+#ifndef CONFIG_FB_MSM_MDP40
+static void msmfb_set_color_conv(struct mdp_ccs *p)
+{
+ int i;
+
+ if (p->direction == MDP_CCS_RGB2YUV) {
+ /* MDP cmd block enable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+ /* RGB->YUV primary forward matrix */
+ for (i = 0; i < MDP_CCS_SIZE; i++)
+ writel(p->ccs[i], MDP_CSC_PFMVn(i));
+
+ #ifdef CONFIG_FB_MSM_MDP31
+ for (i = 0; i < MDP_BV_SIZE; i++)
+ writel(p->bv[i], MDP_CSC_POST_BV2n(i));
+ #endif
+
+ /* MDP cmd block disable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+ } else {
+ /* MDP cmd block enable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+ /* YUV->RGB primary reverse matrix */
+ for (i = 0; i < MDP_CCS_SIZE; i++)
+ writel(p->ccs[i], MDP_CSC_PRMVn(i));
+ for (i = 0; i < MDP_BV_SIZE; i++)
+ writel(p->bv[i], MDP_CSC_PRE_BV1n(i));
+
+ /* MDP cmd block disable */
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+ }
+}
+#endif
+
+
+static int msm_fb_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg)
+{
+ struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+ void __user *argp = (void __user *)arg;
+ struct fb_cursor cursor;
+ struct fb_cmap cmap;
+ struct mdp_histogram hist;
+#ifndef CONFIG_FB_MSM_MDP40
+ struct mdp_ccs ccs_matrix;
+#endif
+ struct mdp_page_protection fb_page_protection;
+ int ret = 0;
+
+ if (!mfd->op_enable)
+ return -EPERM;
+
+ switch (cmd) {
+#ifdef CONFIG_FB_MSM_OVERLAY
+ case MSMFB_OVERLAY_GET:
+ down(&msm_fb_ioctl_ppp_sem);
+ ret = msmfb_overlay_get(info, argp);
+ up(&msm_fb_ioctl_ppp_sem);
+ break;
+ case MSMFB_OVERLAY_SET:
+ down(&msm_fb_ioctl_ppp_sem);
+ ret = msmfb_overlay_set(info, argp);
+ up(&msm_fb_ioctl_ppp_sem);
+ break;
+ case MSMFB_OVERLAY_UNSET:
+ down(&msm_fb_ioctl_ppp_sem);
+ ret = msmfb_overlay_unset(info, argp);
+ up(&msm_fb_ioctl_ppp_sem);
+ break;
+ case MSMFB_OVERLAY_PLAY:
+ down(&msm_fb_ioctl_ppp_sem);
+ ret = msmfb_overlay_play(info, argp);
+ up(&msm_fb_ioctl_ppp_sem);
+ break;
+#endif
+ case MSMFB_BLIT:
+ down(&msm_fb_ioctl_ppp_sem);
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+ ret = msmfb_async_blit(info, argp);
+ mdp_ppp_wait(); /* Wait for all blits to be finished. */
+#else
+ ret = msmfb_blit(info, argp);
+#endif
+ up(&msm_fb_ioctl_ppp_sem);
+
+ break;
+
+ /* Ioctl for setting ccs matrix from user space */
+ case MSMFB_SET_CCS_MATRIX:
+#ifndef CONFIG_FB_MSM_MDP40
+ ret = copy_from_user(&ccs_matrix, argp, sizeof(ccs_matrix));
+ if (ret) {
+ printk(KERN_ERR
+ "%s:MSMFB_SET_CCS_MATRIX ioctl failed \n",
+ __func__);
+ return ret;
+ }
+
+ down(&msm_fb_ioctl_ppp_sem);
+ if (ccs_matrix.direction == MDP_CCS_RGB2YUV)
+ mdp_ccs_rgb2yuv = ccs_matrix;
+ else
+ mdp_ccs_yuv2rgb = ccs_matrix;
+
+ msmfb_set_color_conv(&ccs_matrix) ;
+ up(&msm_fb_ioctl_ppp_sem);
+#else
+ ret = -EINVAL;
+#endif
+
+ break;
+
+ /* Ioctl for getting ccs matrix to user space */
+ case MSMFB_GET_CCS_MATRIX:
+#ifndef CONFIG_FB_MSM_MDP40
+ ret = copy_from_user(&ccs_matrix, argp, sizeof(ccs_matrix)) ;
+ if (ret) {
+ printk(KERN_ERR
+ "%s:MSMFB_GET_CCS_MATRIX ioctl failed \n",
+ __func__);
+ return ret;
+ }
+
+ down(&msm_fb_ioctl_ppp_sem);
+ if (ccs_matrix.direction == MDP_CCS_RGB2YUV)
+ ccs_matrix = mdp_ccs_rgb2yuv;
+ else
+ ccs_matrix = mdp_ccs_yuv2rgb;
+
+ ret = copy_to_user(argp, &ccs_matrix, sizeof(ccs_matrix));
+
+ if (ret) {
+ printk(KERN_ERR
+ "%s:MSMFB_GET_CCS_MATRIX ioctl failed \n",
+ __func__);
+ return ret ;
+ }
+ up(&msm_fb_ioctl_ppp_sem);
+#else
+ ret = -EINVAL;
+#endif
+
+ break;
+
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+ case MSMFB_ASYNC_BLIT:
+ down(&msm_fb_ioctl_ppp_sem);
+ ret = msmfb_async_blit(info, argp);
+ up(&msm_fb_ioctl_ppp_sem);
+ break;
+
+ case MSMFB_BLIT_FLUSH:
+ down(&msm_fb_ioctl_ppp_sem);
+ mdp_ppp_wait();
+ up(&msm_fb_ioctl_ppp_sem);
+ break;
+#endif
+
+ case MSMFB_GRP_DISP:
+#ifdef CONFIG_FB_MSM_MDP22
+ {
+ unsigned long grp_id;
+
+ ret = copy_from_user(&grp_id, argp, sizeof(grp_id));
+ if (ret)
+ return ret;
+
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+ writel(grp_id, MDP_FULL_BYPASS_WORD43);
+ mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF,
+ FALSE);
+ break;
+ }
+#else
+ return -EFAULT;
+#endif
+ case MSMFB_SUSPEND_SW_REFRESHER:
+ if (!mfd->panel_power_on)
+ return -EPERM;
+
+ mfd->sw_refreshing_enable = FALSE;
+ ret = msm_fb_stop_sw_refresher(mfd);
+ break;
+
+ case MSMFB_RESUME_SW_REFRESHER:
+ if (!mfd->panel_power_on)
+ return -EPERM;
+
+ mfd->sw_refreshing_enable = TRUE;
+ ret = msm_fb_resume_sw_refresher(mfd);
+ break;
+
+ case MSMFB_CURSOR:
+ ret = copy_from_user(&cursor, argp, sizeof(cursor));
+ if (ret)
+ return ret;
+
+ ret = msm_fb_cursor(info, &cursor);
+ break;
+
+ case MSMFB_SET_LUT:
+ ret = copy_from_user(&cmap, argp, sizeof(cmap));
+ if (ret)
+ return ret;
+
+ mutex_lock(&msm_fb_ioctl_lut_sem);
+ ret = msm_fb_set_lut(&cmap, info);
+ mutex_unlock(&msm_fb_ioctl_lut_sem);
+ break;
+
+ case MSMFB_HISTOGRAM:
+ if (!mfd->do_histogram)
+ return -ENODEV;
+
+ ret = copy_from_user(&hist, argp, sizeof(hist));
+ if (ret)
+ return ret;
+
+ mutex_lock(&msm_fb_ioctl_hist_sem);
+ ret = mfd->do_histogram(info, &hist);
+ mutex_unlock(&msm_fb_ioctl_hist_sem);
+ break;
+
+ case MSMFB_GET_PAGE_PROTECTION:
+ fb_page_protection.page_protection
+ = mfd->mdp_fb_page_protection;
+ ret = copy_to_user(argp, &fb_page_protection,
+ sizeof(fb_page_protection));
+ if (ret)
+ return ret;
+ break;
+
+ case MSMFB_SET_PAGE_PROTECTION:
+#ifdef CONFIG_ARCH_QSD8X50
+ ret = copy_from_user(&fb_page_protection, argp,
+ sizeof(fb_page_protection));
+ if (ret)
+ return ret;
+
+ /* Validate the proposed page protection settings. */
+ switch (fb_page_protection.page_protection) {
+ case MDP_FB_PAGE_PROTECTION_NONCACHED:
+ case MDP_FB_PAGE_PROTECTION_WRITECOMBINE:
+ case MDP_FB_PAGE_PROTECTION_WRITETHROUGHCACHE:
+ /* Write-back cache (read allocate) */
+ case MDP_FB_PAGE_PROTECTION_WRITEBACKCACHE:
+ /* Write-back cache (write allocate) */
+ case MDP_FB_PAGE_PROTECTION_WRITEBACKWACACHE:
+ mfd->mdp_fb_page_protection =
+ fb_page_protection.page_protection;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+#else
+ /*
+ * Don't allow caching until 7k DMA cache operations are
+ * available.
+ */
+ ret = -EINVAL;
+#endif
+ break;
+
+ default:
+ MSM_FB_INFO("MDP: unknown ioctl (cmd=%d) received!\n", cmd);
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static int msm_fb_register_driver(void)
+{
+ return platform_driver_register(&msm_fb_driver);
+}
+
+void msm_fb_add_device(struct platform_device *pdev)
+{
+ struct msm_fb_panel_data *pdata;
+ struct platform_device *this_dev = NULL;
+ struct fb_info *fbi;
+ struct msm_fb_data_type *mfd = NULL;
+ u32 type, id, fb_num;
+
+ if (!pdev)
+ return;
+ id = pdev->id;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata)
+ return;
+ type = pdata->panel_info.type;
+ fb_num = pdata->panel_info.fb_num;
+
+ if (fb_num <= 0)
+ return;
+
+ if (fbi_list_index >= MAX_FBI_LIST) {
+ printk(KERN_ERR "msm_fb: no more framebuffer info list!\n");
+ return;
+ }
+ /*
+ * alloc panel device data
+ */
+ this_dev = msm_fb_device_alloc(pdata, type, id);
+
+ if (!this_dev) {
+ printk(KERN_ERR
+ "%s: msm_fb_device_alloc failed!\n", __func__);
+ return;
+ }
+
+ /*
+ * alloc framebuffer info + par data
+ */
+ fbi = framebuffer_alloc(sizeof(struct msm_fb_data_type), NULL);
+ if (fbi == NULL) {
+ platform_device_put(this_dev);
+ printk(KERN_ERR "msm_fb: can't alloca framebuffer info data!\n");
+ return;
+ }
+
+ mfd = (struct msm_fb_data_type *)fbi->par;
+ mfd->key = MFD_KEY;
+ mfd->fbi = fbi;
+ mfd->panel.type = type;
+ mfd->panel.id = id;
+ mfd->fb_page = fb_num;
+ mfd->index = fbi_list_index;
+ mfd->mdp_fb_page_protection = MDP_FB_PAGE_PROTECTION_WRITECOMBINE;
+
+ /* link to the latest pdev */
+ mfd->pdev = this_dev;
+
+ mfd_list[mfd_list_index++] = mfd;
+ fbi_list[fbi_list_index++] = fbi;
+
+ /*
+ * set driver data
+ */
+ platform_set_drvdata(this_dev, mfd);
+
+ if (platform_device_add(this_dev)) {
+ printk(KERN_ERR "msm_fb: platform_device_add failed!\n");
+ platform_device_put(this_dev);
+ framebuffer_release(fbi);
+ fbi_list_index--;
+ return;
+ }
+}
+EXPORT_SYMBOL(msm_fb_add_device);
+
+int __init msm_fb_init(void)
+{
+ int rc = -ENODEV;
+
+ if (msm_fb_register_driver())
+ return rc;
+
+#ifdef MSM_FB_ENABLE_DBGFS
+ {
+ struct dentry *root;
+
+ if ((root = msm_fb_get_debugfs_root()) != NULL) {
+ msm_fb_debugfs_file_create(root,
+ "msm_fb_msg_printing_level",
+ (u32 *) &msm_fb_msg_level);
+ msm_fb_debugfs_file_create(root,
+ "mddi_msg_printing_level",
+ (u32 *) &mddi_msg_level);
+ msm_fb_debugfs_file_create(root, "msm_fb_debug_enabled",
+ (u32 *) &msm_fb_debug_enabled);
+ }
+ }
+#endif
+
+ return 0;
+}
+
+module_init(msm_fb_init);
diff --git a/drivers/staging/msm/msm_fb.h b/drivers/staging/msm/msm_fb.h
new file mode 100644
index 0000000..f939138
--- /dev/null
+++ b/drivers/staging/msm/msm_fb.h
@@ -0,0 +1,174 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Code Aurora nor
+ * the names of its contributors may be used to endorse or promote
+ * products derived from this software without specific prior written
+ * permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MSM_FB_H
+#define MSM_FB_H
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include "linux/proc_fs.h"
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <mach/board.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <mach/memory.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/hrtimer.h>
+
+#include <linux/fb.h>
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+#include <linux/earlysuspend.h>
+#endif
+
+#include "msm_fb_panel.h"
+#include "mdp.h"
+
+#define MSM_FB_DEFAULT_PAGE_SIZE 2
+#define MFD_KEY 0x11161126
+#define MSM_FB_MAX_DEV_LIST 32
+
+struct disp_info_type_suspend {
+ boolean op_enable;
+ boolean sw_refreshing_enable;
+ boolean panel_power_on;
+};
+
+struct msm_fb_data_type {
+ __u32 key;
+ __u32 index;
+ __u32 ref_cnt;
+ __u32 fb_page;
+
+ panel_id_type panel;
+ struct msm_panel_info panel_info;
+
+ DISP_TARGET dest;
+ struct fb_info *fbi;
+
+ boolean op_enable;
+ uint32 fb_imgType;
+ boolean sw_currently_refreshing;
+ boolean sw_refreshing_enable;
+ boolean hw_refresh;
+
+ MDPIBUF ibuf;
+ boolean ibuf_flushed;
+ struct timer_list refresh_timer;
+ struct completion refresher_comp;
+
+ boolean pan_waiting;
+ struct completion pan_comp;
+
+ /* vsync */
+ boolean use_mdp_vsync;
+ __u32 vsync_gpio;
+ __u32 total_lcd_lines;
+ __u32 total_porch_lines;
+ __u32 lcd_ref_usec_time;
+ __u32 refresh_timer_duration;
+
+ struct hrtimer dma_hrtimer;
+
+ boolean panel_power_on;
+ struct work_struct dma_update_worker;
+ struct semaphore sem;
+
+ struct timer_list vsync_resync_timer;
+ boolean vsync_handler_pending;
+ struct work_struct vsync_resync_worker;
+
+ ktime_t last_vsync_timetick;
+
+ __u32 *vsync_width_boundary;
+
+ unsigned int pmem_id;
+ struct disp_info_type_suspend suspend;
+
+ __u32 channel_irq;
+
+ struct mdp_dma_data *dma;
+ void (*dma_fnc) (struct msm_fb_data_type *mfd);
+ int (*cursor_update) (struct fb_info *info,
+ struct fb_cursor *cursor);
+ int (*lut_update) (struct fb_info *info,
+ struct fb_cmap *cmap);
+ int (*do_histogram) (struct fb_info *info,
+ struct mdp_histogram *hist);
+ void *cursor_buf;
+ void *cursor_buf_phys;
+
+ void *cmd_port;
+ void *data_port;
+ void *data_port_phys;
+
+ __u32 bl_level;
+
+ struct platform_device *pdev;
+
+ __u32 var_xres;
+ __u32 var_yres;
+ __u32 var_pixclock;
+
+#ifdef MSM_FB_ENABLE_DBGFS
+ struct dentry *sub_dir;
+#endif
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+ struct early_suspend early_suspend;
+ struct early_suspend mddi_early_suspend;
+ struct early_suspend mddi_ext_early_suspend;
+#endif
+ u32 mdp_fb_page_protection;
+ int allow_set_offset;
+};
+
+struct dentry *msm_fb_get_debugfs_root(void);
+void msm_fb_debugfs_file_create(struct dentry *root, const char *name,
+ u32 *var);
+void msm_fb_set_backlight(struct msm_fb_data_type *mfd, __u32 bkl_lvl,
+ u32 save);
+
+void msm_fb_add_device(struct platform_device *pdev);
+
+int msm_fb_detect_client(const char *name);
+
+#ifdef CONFIG_FB_BACKLIGHT
+void msm_fb_config_backlight(struct msm_fb_data_type *mfd);
+#endif
+
+#endif /* MSM_FB_H */
diff --git a/drivers/staging/msm/msm_fb_bl.c b/drivers/staging/msm/msm_fb_bl.c
new file mode 100644
index 0000000..033fc94
--- /dev/null
+++ b/drivers/staging/msm/msm_fb_bl.c
@@ -0,0 +1,79 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/string.h>
+#include <linux/version.h>
+#include <linux/backlight.h>
+
+#include "msm_fb.h"
+
+static int msm_fb_bl_get_brightness(struct backlight_device *pbd)
+{
+ return pbd->props.brightness;
+}
+
+static int msm_fb_bl_update_status(struct backlight_device *pbd)
+{
+ struct msm_fb_data_type *mfd = bl_get_data(pbd);
+ __u32 bl_lvl;
+
+ bl_lvl = pbd->props.brightness;
+ bl_lvl = mfd->fbi->bl_curve[bl_lvl];
+ msm_fb_set_backlight(mfd, bl_lvl, 1);
+ return 0;
+}
+
+static struct backlight_ops msm_fb_bl_ops = {
+ .get_brightness = msm_fb_bl_get_brightness,
+ .update_status = msm_fb_bl_update_status,
+};
+
+void msm_fb_config_backlight(struct msm_fb_data_type *mfd)
+{
+ struct msm_fb_panel_data *pdata;
+ struct backlight_device *pbd;
+ struct fb_info *fbi;
+ char name[16];
+
+ fbi = mfd->fbi;
+ pdata = (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data;
+
+ if ((pdata) && (pdata->set_backlight)) {
+ snprintf(name, sizeof(name), "msmfb_bl%d", mfd->index);
+ pbd =
+ backlight_device_register(name, fbi->dev, mfd,
+ &msm_fb_bl_ops);
+ if (!IS_ERR(pbd)) {
+ fbi->bl_dev = pbd;
+ fb_bl_default_curve(fbi,
+ 0,
+ mfd->panel_info.bl_min,
+ mfd->panel_info.bl_max);
+ pbd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
+ pbd->props.brightness = FB_BACKLIGHT_LEVELS - 1;
+ backlight_update_status(pbd);
+ } else {
+ fbi->bl_dev = NULL;
+ printk(KERN_ERR "msm_fb: backlight_device_register failed!\n");
+ }
+ }
+}
diff --git a/drivers/staging/msm/msm_fb_def.h b/drivers/staging/msm/msm_fb_def.h
new file mode 100644
index 0000000..6de4409
--- /dev/null
+++ b/drivers/staging/msm/msm_fb_def.h
@@ -0,0 +1,201 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Code Aurora nor
+ * the names of its contributors may be used to endorse or promote
+ * products derived from this software without specific prior written
+ * permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MSM_FB_DEF_H
+#define MSM_FB_DEF_H
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include "msm_mdp.h"
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/uaccess.h>
+#include <linux/workqueue.h>
+#include <linux/string.h>
+#include <linux/version.h>
+#include <linux/proc_fs.h>
+#include <linux/vmalloc.h>
+#include <linux/debugfs.h>
+#include <linux/console.h>
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include "linux/proc_fs.h"
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <linux/fb.h>
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/platform_device.h>
+
+typedef s64 int64;
+typedef s32 int32;
+typedef s16 int16;
+typedef s8 int8;
+
+typedef u64 uint64;
+typedef u32 uint32;
+typedef u16 uint16;
+typedef u8 uint8;
+
+typedef s32 int4;
+typedef s16 int2;
+typedef s8 int1;
+
+typedef u32 uint4;
+typedef u16 uint2;
+typedef u8 uint1;
+
+typedef u32 dword;
+typedef u16 word;
+typedef u8 byte;
+
+typedef unsigned int boolean;
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#define MSM_FB_ENABLE_DBGFS
+#define FEATURE_MDDI
+
+#define outp32(addr, val) writel(val, addr)
+#define outp16(addr, val) writew(val, addr)
+#define outp8(addr, val) writeb(val, addr)
+#define outp(addr, val) outp32(addr, val)
+
+#ifndef MAX
+#define MAX( x, y ) (((x) > (y)) ? (x) : (y))
+#endif
+
+#ifndef MIN
+#define MIN( x, y ) (((x) < (y)) ? (x) : (y))
+#endif
+
+/*--------------------------------------------------------------------------*/
+
+#define inp32(addr) readl(addr)
+#define inp16(addr) readw(addr)
+#define inp8(addr) readb(addr)
+#define inp(addr) inp32(addr)
+
+#define inpw(port) readw(port)
+#define outpw(port, val) writew(val, port)
+#define inpdw(port) readl(port)
+#define outpdw(port, val) writel(val, port)
+
+
+#define clk_busy_wait(x) msleep_interruptible((x)/1000)
+
+#define memory_barrier()
+
+#define assert(expr) \
+ if(!(expr)) { \
+ printk(KERN_ERR "msm_fb: assertion failed! %s,%s,%s,line=%d\n",\
+ #expr, __FILE__, __func__, __LINE__); \
+ }
+
+#define ASSERT(x) assert(x)
+
+#define DISP_EBI2_LOCAL_DEFINE
+#ifdef DISP_EBI2_LOCAL_DEFINE
+#define LCD_PRIM_BASE_PHYS 0x98000000
+#define LCD_SECD_BASE_PHYS 0x9c000000
+#define EBI2_PRIM_LCD_RS_PIN 0x20000
+#define EBI2_SECD_LCD_RS_PIN 0x20000
+
+#define EBI2_PRIM_LCD_CLR 0xC0
+#define EBI2_PRIM_LCD_SEL 0x40
+
+#define EBI2_SECD_LCD_CLR 0x300
+#define EBI2_SECD_LCD_SEL 0x100
+#endif
+
+extern u32 msm_fb_msg_level;
+
+/*
+ * Message printing priorities:
+ * LEVEL 0 KERN_EMERG (highest priority)
+ * LEVEL 1 KERN_ALERT
+ * LEVEL 2 KERN_CRIT
+ * LEVEL 3 KERN_ERR
+ * LEVEL 4 KERN_WARNING
+ * LEVEL 5 KERN_NOTICE
+ * LEVEL 6 KERN_INFO
+ * LEVEL 7 KERN_DEBUG (Lowest priority)
+ */
+#define MSM_FB_EMERG(msg, ...) \
+ if (msm_fb_msg_level > 0) \
+ printk(KERN_EMERG msg, ## __VA_ARGS__);
+#define MSM_FB_ALERT(msg, ...) \
+ if (msm_fb_msg_level > 1) \
+ printk(KERN_ALERT msg, ## __VA_ARGS__);
+#define MSM_FB_CRIT(msg, ...) \
+ if (msm_fb_msg_level > 2) \
+ printk(KERN_CRIT msg, ## __VA_ARGS__);
+#define MSM_FB_ERR(msg, ...) \
+ if (msm_fb_msg_level > 3) \
+ printk(KERN_ERR msg, ## __VA_ARGS__);
+#define MSM_FB_WARNING(msg, ...) \
+ if (msm_fb_msg_level > 4) \
+ printk(KERN_WARNING msg, ## __VA_ARGS__);
+#define MSM_FB_NOTICE(msg, ...) \
+ if (msm_fb_msg_level > 5) \
+ printk(KERN_NOTICE msg, ## __VA_ARGS__);
+#define MSM_FB_INFO(msg, ...) \
+ if (msm_fb_msg_level > 6) \
+ printk(KERN_INFO msg, ## __VA_ARGS__);
+#define MSM_FB_DEBUG(msg, ...) \
+ if (msm_fb_msg_level > 7) \
+ printk(KERN_DEBUG msg, ## __VA_ARGS__);
+
+#ifdef MSM_FB_C
+unsigned char *msm_mdp_base;
+unsigned char *msm_pmdh_base;
+unsigned char *msm_emdh_base;
+#else
+extern unsigned char *msm_mdp_base;
+extern unsigned char *msm_pmdh_base;
+extern unsigned char *msm_emdh_base;
+#endif
+
+#endif /* MSM_FB_DEF_H */
diff --git a/drivers/staging/msm/msm_fb_panel.c b/drivers/staging/msm/msm_fb_panel.c
new file mode 100644
index 0000000..b17a239
--- /dev/null
+++ b/drivers/staging/msm/msm_fb_panel.c
@@ -0,0 +1,136 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/uaccess.h>
+#include <linux/workqueue.h>
+#include <linux/string.h>
+#include <linux/version.h>
+#include <linux/proc_fs.h>
+#include <linux/vmalloc.h>
+#include <linux/debugfs.h>
+
+#include "msm_fb_panel.h"
+
+int panel_next_on(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct msm_fb_panel_data *pdata;
+ struct msm_fb_panel_data *next_pdata;
+ struct platform_device *next_pdev;
+
+ pdata = (struct msm_fb_panel_data *)pdev->dev.platform_data;
+
+ if (pdata) {
+ next_pdev = pdata->next;
+ if (next_pdev) {
+ next_pdata =
+ (struct msm_fb_panel_data *)next_pdev->dev.
+ platform_data;
+ if ((next_pdata) && (next_pdata->on))
+ ret = next_pdata->on(next_pdev);
+ }
+ }
+
+ return ret;
+}
+
+int panel_next_off(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct msm_fb_panel_data *pdata;
+ struct msm_fb_panel_data *next_pdata;
+ struct platform_device *next_pdev;
+
+ pdata = (struct msm_fb_panel_data *)pdev->dev.platform_data;
+
+ if (pdata) {
+ next_pdev = pdata->next;
+ if (next_pdev) {
+ next_pdata =
+ (struct msm_fb_panel_data *)next_pdev->dev.
+ platform_data;
+ if ((next_pdata) && (next_pdata->on))
+ ret = next_pdata->off(next_pdev);
+ }
+ }
+
+ return ret;
+}
+
+struct platform_device *msm_fb_device_alloc(struct msm_fb_panel_data *pdata,
+ u32 type, u32 id)
+{
+ struct platform_device *this_dev = NULL;
+ char dev_name[16];
+
+ switch (type) {
+ case EBI2_PANEL:
+ snprintf(dev_name, sizeof(dev_name), "ebi2_lcd");
+ break;
+
+ case MDDI_PANEL:
+ snprintf(dev_name, sizeof(dev_name), "mddi");
+ break;
+
+ case EXT_MDDI_PANEL:
+ snprintf(dev_name, sizeof(dev_name), "mddi_ext");
+ break;
+
+ case TV_PANEL:
+ snprintf(dev_name, sizeof(dev_name), "tvenc");
+ break;
+
+ case HDMI_PANEL:
+ case LCDC_PANEL:
+ snprintf(dev_name, sizeof(dev_name), "lcdc");
+ break;
+
+ default:
+ return NULL;
+ }
+
+ if (pdata != NULL)
+ pdata->next = NULL;
+ else
+ return NULL;
+
+ this_dev =
+ platform_device_alloc(dev_name, ((u32) type << 16) | (u32) id);
+
+ if (this_dev) {
+ if (platform_device_add_data
+ (this_dev, pdata, sizeof(struct msm_fb_panel_data))) {
+ printk
+ ("msm_fb_device_alloc: platform_device_add_data failed!\n");
+ platform_device_put(this_dev);
+ return NULL;
+ }
+ }
+
+ return this_dev;
+}
diff --git a/drivers/staging/msm/msm_fb_panel.h b/drivers/staging/msm/msm_fb_panel.h
new file mode 100644
index 0000000..ab45831
--- /dev/null
+++ b/drivers/staging/msm/msm_fb_panel.h
@@ -0,0 +1,145 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Code Aurora nor
+ * the names of its contributors may be used to endorse or promote
+ * products derived from this software without specific prior written
+ * permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MSM_FB_PANEL_H
+#define MSM_FB_PANEL_H
+
+#include "msm_fb_def.h"
+
+struct msm_fb_data_type;
+
+typedef void (*msm_fb_vsync_handler_type) (void *arg);
+
+/* panel id type */
+typedef struct panel_id_s {
+ uint16 id;
+ uint16 type;
+} panel_id_type;
+
+/* panel type list */
+#define NO_PANEL 0xffff /* No Panel */
+#define MDDI_PANEL 1 /* MDDI */
+#define EBI2_PANEL 2 /* EBI2 */
+#define LCDC_PANEL 3 /* internal LCDC type */
+#define EXT_MDDI_PANEL 4 /* Ext.MDDI */
+#define TV_PANEL 5 /* TV */
+#define HDMI_PANEL 6 /* HDMI TV */
+
+/* panel class */
+typedef enum {
+ DISPLAY_LCD = 0, /* lcd = ebi2/mddi */
+ DISPLAY_LCDC, /* lcdc */
+ DISPLAY_TV, /* TV Out */
+ DISPLAY_EXT_MDDI, /* External MDDI */
+} DISP_TARGET;
+
+/* panel device locaiton */
+typedef enum {
+ DISPLAY_1 = 0, /* attached as first device */
+ DISPLAY_2, /* attached on second device */
+ MAX_PHYS_TARGET_NUM,
+} DISP_TARGET_PHYS;
+
+/* panel info type */
+struct lcd_panel_info {
+ __u32 vsync_enable;
+ __u32 refx100;
+ __u32 v_back_porch;
+ __u32 v_front_porch;
+ __u32 v_pulse_width;
+ __u32 hw_vsync_mode;
+ __u32 vsync_notifier_period;
+};
+
+struct lcdc_panel_info {
+ __u32 h_back_porch;
+ __u32 h_front_porch;
+ __u32 h_pulse_width;
+ __u32 v_back_porch;
+ __u32 v_front_porch;
+ __u32 v_pulse_width;
+ __u32 border_clr;
+ __u32 underflow_clr;
+ __u32 hsync_skew;
+};
+
+struct mddi_panel_info {
+ __u32 vdopkt;
+};
+
+struct msm_panel_info {
+ __u32 xres;
+ __u32 yres;
+ __u32 bpp;
+ __u32 type;
+ __u32 wait_cycle;
+ DISP_TARGET_PHYS pdest;
+ __u32 bl_max;
+ __u32 bl_min;
+ __u32 fb_num;
+ __u32 clk_rate;
+ __u32 clk_min;
+ __u32 clk_max;
+ __u32 frame_count;
+
+ union {
+ struct mddi_panel_info mddi;
+ };
+
+ union {
+ struct lcd_panel_info lcd;
+ struct lcdc_panel_info lcdc;
+ };
+};
+
+struct msm_fb_panel_data {
+ struct msm_panel_info panel_info;
+ void (*set_rect) (int x, int y, int xres, int yres);
+ void (*set_vsync_notifier) (msm_fb_vsync_handler_type, void *arg);
+ void (*set_backlight) (struct msm_fb_data_type *);
+
+ /* function entry chain */
+ int (*on) (struct platform_device *pdev);
+ int (*off) (struct platform_device *pdev);
+ struct platform_device *next;
+};
+
+/*===========================================================================
+ FUNCTIONS PROTOTYPES
+============================================================================*/
+struct platform_device *msm_fb_device_alloc(struct msm_fb_panel_data *pdata,
+ u32 type, u32 id);
+int panel_next_on(struct platform_device *pdev);
+int panel_next_off(struct platform_device *pdev);
+
+int lcdc_device_register(struct msm_panel_info *pinfo);
+
+int mddi_toshiba_device_register(struct msm_panel_info *pinfo,
+ u32 channel, u32 panel);
+
+#endif /* MSM_FB_PANEL_H */
diff --git a/drivers/staging/msm/msm_mdp.h b/drivers/staging/msm/msm_mdp.h
new file mode 100644
index 0000000..2d5323f
--- /dev/null
+++ b/drivers/staging/msm/msm_mdp.h
@@ -0,0 +1,245 @@
+/* include/linux/msm_mdp.h
+ *
+ * Copyright (C) 2007 Google Incorporated
+ * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef _MSM_MDP_H_
+#define _MSM_MDP_H_
+
+#include <linux/types.h>
+#include <linux/fb.h>
+
+#define MSMFB_IOCTL_MAGIC 'm'
+#define MSMFB_GRP_DISP _IOW(MSMFB_IOCTL_MAGIC, 1, unsigned int)
+#define MSMFB_BLIT _IOW(MSMFB_IOCTL_MAGIC, 2, unsigned int)
+#define MSMFB_SUSPEND_SW_REFRESHER _IOW(MSMFB_IOCTL_MAGIC, 128, unsigned int)
+#define MSMFB_RESUME_SW_REFRESHER _IOW(MSMFB_IOCTL_MAGIC, 129, unsigned int)
+#define MSMFB_CURSOR _IOW(MSMFB_IOCTL_MAGIC, 130, struct fb_cursor)
+#define MSMFB_SET_LUT _IOW(MSMFB_IOCTL_MAGIC, 131, struct fb_cmap)
+#define MSMFB_HISTOGRAM _IOWR(MSMFB_IOCTL_MAGIC, 132, struct mdp_histogram)
+/* new ioctls's for set/get ccs matrix */
+#define MSMFB_GET_CCS_MATRIX _IOWR(MSMFB_IOCTL_MAGIC, 133, struct mdp_ccs)
+#define MSMFB_SET_CCS_MATRIX _IOW(MSMFB_IOCTL_MAGIC, 134, struct mdp_ccs)
+#define MSMFB_OVERLAY_SET _IOWR(MSMFB_IOCTL_MAGIC, 135, \
+ struct mdp_overlay)
+#define MSMFB_OVERLAY_UNSET _IOW(MSMFB_IOCTL_MAGIC, 136, unsigned int)
+#define MSMFB_OVERLAY_PLAY _IOW(MSMFB_IOCTL_MAGIC, 137, \
+ struct msmfb_overlay_data)
+#define MSMFB_GET_PAGE_PROTECTION _IOR(MSMFB_IOCTL_MAGIC, 138, \
+ struct mdp_page_protection)
+#define MSMFB_SET_PAGE_PROTECTION _IOW(MSMFB_IOCTL_MAGIC, 139, \
+ struct mdp_page_protection)
+#define MSMFB_OVERLAY_GET _IOR(MSMFB_IOCTL_MAGIC, 140, \
+ struct mdp_overlay)
+
+/* new ioctls for async MDP ops */
+#define MSMFB_ASYNC_BLIT _IOW(MSMFB_IOCTL_MAGIC, 141, unsigned int)
+#define MSMFB_BLIT_FLUSH _IOR(MSMFB_IOCTL_MAGIC, 142, unsigned int)
+
+#define MDP_IMGTYPE2_START 0x10000
+
+enum {
+ MDP_RGB_565, /* RGB 565 planer */
+ MDP_XRGB_8888, /* RGB 888 padded */
+ MDP_Y_CBCR_H2V2, /* Y and CbCr, pseudo planer w/ Cb is in MSB */
+ MDP_ARGB_8888, /* ARGB 888 */
+ MDP_RGB_888, /* RGB 888 planer */
+ MDP_Y_CRCB_H2V2, /* Y and CrCb, pseudo planer w/ Cr is in MSB */
+ MDP_YCRYCB_H2V1, /* YCrYCb interleave */
+ MDP_Y_CRCB_H2V1, /* Y and CrCb, pseduo planer w/ Cr is in MSB */
+ MDP_Y_CBCR_H2V1, /* Y and CrCb, pseduo planer w/ Cr is in MSB */
+ MDP_RGBA_8888, /* ARGB 888 */
+ MDP_BGRA_8888, /* ABGR 888 */
+ MDP_Y_CRCB_H2V2_TILE, /* Y and CrCb, pseudo planer tile */
+ MDP_Y_CBCR_H2V2_TILE, /* Y and CbCr, pseudo planer tile */
+ MDP_IMGTYPE_LIMIT,
+ MDP_BGR_565 = MDP_IMGTYPE2_START, /* BGR 565 planer */
+ MDP_FB_FORMAT, /* framebuffer format */
+ MDP_IMGTYPE_LIMIT2 /* Non valid image type after this enum */
+};
+
+enum {
+ PMEM_IMG,
+ FB_IMG,
+};
+
+/* mdp_blit_req flag values */
+#define MDP_ROT_NOP 0
+#define MDP_FLIP_LR 0x1
+#define MDP_FLIP_UD 0x2
+#define MDP_ROT_90 0x4
+#define MDP_ROT_180 (MDP_FLIP_UD|MDP_FLIP_LR)
+#define MDP_ROT_270 (MDP_ROT_90|MDP_FLIP_UD|MDP_FLIP_LR)
+#define MDP_DITHER 0x8
+#define MDP_BLUR 0x10
+#define MDP_BLEND_FG_PREMULT 0x20000
+
+#define MDP_DEINTERLACE 0x80000000
+#define MDP_SHARPENING 0x40000000
+
+#define MDP_NO_DMA_BARRIER_START 0x20000000
+#define MDP_NO_DMA_BARRIER_END 0x10000000
+#define MDP_NO_BLIT 0x08000000
+#define MDP_BLIT_WITH_DMA_BARRIERS 0x000
+#define MDP_BLIT_WITH_NO_DMA_BARRIERS \
+ (MDP_NO_DMA_BARRIER_START | MDP_NO_DMA_BARRIER_END)
+#define MDP_TRANSP_NOP 0xffffffff
+#define MDP_ALPHA_NOP 0xff
+
+#define MDP_BLIT_SRC_GEM 0x02000000 /* set for GEM, clear for PMEM */
+#define MDP_BLIT_DST_GEM 0x01000000 /* set for GEM, clear for PMEM */
+
+#define MDP_FB_PAGE_PROTECTION_NONCACHED (0)
+#define MDP_FB_PAGE_PROTECTION_WRITECOMBINE (1)
+#define MDP_FB_PAGE_PROTECTION_WRITETHROUGHCACHE (2)
+#define MDP_FB_PAGE_PROTECTION_WRITEBACKCACHE (3)
+#define MDP_FB_PAGE_PROTECTION_WRITEBACKWACACHE (4)
+/* Sentinel: Don't use! */
+#define MDP_FB_PAGE_PROTECTION_INVALID (5)
+/* Count of the number of MDP_FB_PAGE_PROTECTION_... values. */
+#define MDP_NUM_FB_PAGE_PROTECTION_VALUES (5)
+
+struct mdp_rect {
+ uint32_t x;
+ uint32_t y;
+ uint32_t w;
+ uint32_t h;
+};
+
+struct mdp_img {
+ uint32_t width;
+ uint32_t height;
+ uint32_t format;
+ uint32_t offset;
+ int memory_id; /* the file descriptor */
+ uint32_t priv;
+};
+
+/*
+ * {3x3} + {3} ccs matrix
+ */
+
+#define MDP_CCS_RGB2YUV 0
+#define MDP_CCS_YUV2RGB 1
+
+#define MDP_CCS_SIZE 9
+#define MDP_BV_SIZE 3
+
+struct mdp_ccs {
+ int direction; /* MDP_CCS_RGB2YUV or YUV2RGB */
+ uint16_t ccs[MDP_CCS_SIZE]; /* 3x3 color coefficients */
+ uint16_t bv[MDP_BV_SIZE]; /* 1x3 bias vector */
+};
+
+/* The version of the mdp_blit_req structure so that
+ * user applications can selectively decide which functionality
+ * to include
+ */
+
+#define MDP_BLIT_REQ_VERSION 2
+
+struct mdp_blit_req {
+ struct mdp_img src;
+ struct mdp_img dst;
+ struct mdp_rect src_rect;
+ struct mdp_rect dst_rect;
+ uint32_t alpha;
+ uint32_t transp_mask;
+ uint32_t flags;
+ int sharpening_strength; /* -127 <--> 127, default 64 */
+};
+
+struct mdp_blit_req_list {
+ uint32_t count;
+ struct mdp_blit_req req[];
+};
+
+struct msmfb_data {
+ uint32_t offset;
+ int memory_id;
+ int id;
+};
+
+#define MSMFB_NEW_REQUEST -1
+
+struct msmfb_overlay_data {
+ uint32_t id;
+ struct msmfb_data data;
+};
+
+struct msmfb_img {
+ uint32_t width;
+ uint32_t height;
+ uint32_t format;
+};
+
+struct mdp_overlay {
+ struct msmfb_img src;
+ struct mdp_rect src_rect;
+ struct mdp_rect dst_rect;
+ uint32_t z_order; /* stage number */
+ uint32_t is_fg; /* control alpha & transp */
+ uint32_t alpha;
+ uint32_t transp_mask;
+ uint32_t flags;
+ uint32_t id;
+ uint32_t user_data[8];
+};
+
+struct mdp_histogram {
+ uint32_t frame_cnt;
+ uint32_t bin_cnt;
+ uint32_t *r;
+ uint32_t *g;
+ uint32_t *b;
+};
+
+struct mdp_page_protection {
+ uint32_t page_protection;
+};
+
+
+struct msm_panel_common_pdata {
+ int gpio;
+ int (*backlight_level)(int level, int max, int min);
+ int (*pmic_backlight)(int level);
+ int (*panel_num)(void);
+ void (*panel_config_gpio)(int);
+ int *gpio_num;
+};
+
+struct lcdc_platform_data {
+ int (*lcdc_gpio_config)(int on);
+ void (*lcdc_power_save)(int);
+};
+
+struct tvenc_platform_data {
+ int (*pm_vid_en)(int on);
+};
+
+struct mddi_platform_data {
+ void (*mddi_power_save)(int on);
+ int (*mddi_sel_clk)(u32 *clk_rate);
+};
+
+struct msm_fb_platform_data {
+ int (*detect_client)(const char *name);
+ int mddi_prescan;
+ int (*allow_set_offset)(void);
+};
+
+struct msm_hdmi_platform_data {
+ int irq;
+ int (*cable_detect)(int insert);
+};
+
+#endif /*_MSM_MDP_H_*/
diff --git a/drivers/staging/msm/staging-devices.c b/drivers/staging/msm/staging-devices.c
new file mode 100644
index 0000000..0f8ec3e
--- /dev/null
+++ b/drivers/staging/msm/staging-devices.c
@@ -0,0 +1,323 @@
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/bootmem.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+
+#include <mach/board.h>
+#include <mach/irqs.h>
+#include <mach/sirc.h>
+#include <mach/gpio.h>
+
+#include "msm_mdp.h"
+#include "memory_ll.h"
+//#include "android_pmem.h"
+#include <mach/board.h>
+
+#ifdef CONFIG_MSM_SOC_REV_A
+#define MSM_SMI_BASE 0xE0000000
+#else
+#define MSM_SMI_BASE 0x00000000
+#endif
+
+
+#define TOUCHPAD_SUSPEND 34
+#define TOUCHPAD_IRQ 38
+
+#define MSM_PMEM_MDP_SIZE 0x1591000
+
+#ifdef CONFIG_MSM_SOC_REV_A
+#define SMEM_SPINLOCK_I2C "D:I2C02000021"
+#else
+#define SMEM_SPINLOCK_I2C "S:6"
+#endif
+
+#define MSM_PMEM_ADSP_SIZE 0x1C00000
+
+#define MSM_FB_SIZE 0x500000
+#define MSM_FB_SIZE_ST15 0x800000
+#define MSM_AUDIO_SIZE 0x80000
+#define MSM_GPU_PHYS_SIZE SZ_2M
+
+#ifdef CONFIG_MSM_SOC_REV_A
+#define MSM_SMI_BASE 0xE0000000
+#else
+#define MSM_SMI_BASE 0x00000000
+#endif
+
+#define MSM_SHARED_RAM_PHYS (MSM_SMI_BASE + 0x00100000)
+
+#define MSM_PMEM_SMI_BASE (MSM_SMI_BASE + 0x02B00000)
+#define MSM_PMEM_SMI_SIZE 0x01500000
+
+#define MSM_FB_BASE MSM_PMEM_SMI_BASE
+#define MSM_GPU_PHYS_BASE (MSM_FB_BASE + MSM_FB_SIZE)
+#define MSM_PMEM_SMIPOOL_BASE (MSM_GPU_PHYS_BASE + MSM_GPU_PHYS_SIZE)
+#define MSM_PMEM_SMIPOOL_SIZE (MSM_PMEM_SMI_SIZE - MSM_FB_SIZE \
+ - MSM_GPU_PHYS_SIZE)
+
+#if defined(CONFIG_FB_MSM_MDP40)
+#define MDP_BASE 0xA3F00000
+#define PMDH_BASE 0xAD600000
+#define EMDH_BASE 0xAD700000
+#define TVENC_BASE 0xAD400000
+#else
+#define MDP_BASE 0xAA200000
+#define PMDH_BASE 0xAA600000
+#define EMDH_BASE 0xAA700000
+#define TVENC_BASE 0xAA400000
+#endif
+
+#define PMEM_KERNEL_EBI1_SIZE (CONFIG_PMEM_KERNEL_SIZE * 1024 * 1024)
+
+static struct resource msm_fb_resources[] = {
+ {
+ .flags = IORESOURCE_DMA,
+ }
+};
+
+static struct resource msm_mdp_resources[] = {
+ {
+ .name = "mdp",
+ .start = MDP_BASE,
+ .end = MDP_BASE + 0x000F0000 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device msm_mdp_device = {
+ .name = "mdp",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(msm_mdp_resources),
+ .resource = msm_mdp_resources,
+};
+
+static struct platform_device msm_lcdc_device = {
+ .name = "lcdc",
+ .id = 0,
+};
+
+static int msm_fb_detect_panel(const char *name)
+{
+ int ret = -EPERM;
+
+ if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa()) {
+ if (!strncmp(name, "mddi_toshiba_wvga_pt", 20))
+ ret = 0;
+ else
+ ret = -ENODEV;
+ } else if ((machine_is_qsd8x50_surf() || machine_is_qsd8x50a_surf())
+ && !strcmp(name, "lcdc_external"))
+ ret = 0;
+ else if (0 /*machine_is_qsd8x50_grapefruit() */) {
+ if (!strcmp(name, "lcdc_grapefruit_vga"))
+ ret = 0;
+ else
+ ret = -ENODEV;
+ } else if (machine_is_qsd8x50_st1()) {
+ if (!strcmp(name, "lcdc_st1_wxga"))
+ ret = 0;
+ else
+ ret = -ENODEV;
+ } else if (machine_is_qsd8x50a_st1_5()) {
+ if (!strcmp(name, "lcdc_st15") ||
+ !strcmp(name, "hdmi_sii9022"))
+ ret = 0;
+ else
+ ret = -ENODEV;
+ }
+
+ return ret;
+}
+
+/* Only allow a small subset of machines to set the offset via
+ FB PAN_DISPLAY */
+
+static int msm_fb_allow_set_offset(void)
+{
+ return (machine_is_qsd8x50_st1() ||
+ machine_is_qsd8x50a_st1_5()) ? 1 : 0;
+}
+
+
+static struct msm_fb_platform_data msm_fb_pdata = {
+ .detect_client = msm_fb_detect_panel,
+ .allow_set_offset = msm_fb_allow_set_offset,
+};
+
+static struct platform_device msm_fb_device = {
+ .name = "msm_fb",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(msm_fb_resources),
+ .resource = msm_fb_resources,
+ .dev = {
+ .platform_data = &msm_fb_pdata,
+ }
+};
+
+static void __init qsd8x50_allocate_memory_regions(void)
+{
+ void *addr;
+ unsigned long size;
+ if (machine_is_qsd8x50a_st1_5())
+ size = MSM_FB_SIZE_ST15;
+ else
+ size = MSM_FB_SIZE;
+
+ addr = alloc_bootmem(size); // (void *)MSM_FB_BASE;
+ if (!addr)
+ printk("Failed to allocate bootmem for framebuffer\n");
+
+
+ msm_fb_resources[0].start = __pa(addr);
+ msm_fb_resources[0].end = msm_fb_resources[0].start + size - 1;
+ pr_info(KERN_ERR "using %lu bytes of SMI at %lx physical for fb\n",
+ size, (unsigned long)addr);
+}
+
+static int msm_fb_lcdc_gpio_config(int on)
+{
+// return 0;
+ if (machine_is_qsd8x50_st1()) {
+ if (on) {
+ gpio_set_value(32, 1);
+ mdelay(100);
+ gpio_set_value(20, 1);
+ gpio_set_value(17, 1);
+ gpio_set_value(19, 1);
+ } else {
+ gpio_set_value(17, 0);
+ gpio_set_value(19, 0);
+ gpio_set_value(20, 0);
+ mdelay(100);
+ gpio_set_value(32, 0);
+ }
+ } else if (machine_is_qsd8x50a_st1_5()) {
+ if (on) {
+ gpio_set_value(17, 1);
+ gpio_set_value(19, 1);
+ gpio_set_value(20, 1);
+ gpio_set_value(22, 0);
+ gpio_set_value(32, 1);
+ gpio_set_value(155, 1);
+ //st15_hdmi_power(1);
+ gpio_set_value(22, 1);
+
+ } else {
+ gpio_set_value(17, 0);
+ gpio_set_value(19, 0);
+ gpio_set_value(22, 0);
+ gpio_set_value(32, 0);
+ gpio_set_value(155, 0);
+ // st15_hdmi_power(0);
+ }
+ }
+ return 0;
+}
+
+
+static struct lcdc_platform_data lcdc_pdata = {
+ .lcdc_gpio_config = msm_fb_lcdc_gpio_config,
+};
+
+static struct msm_gpio msm_fb_st15_gpio_config_data[] = {
+ { GPIO_CFG(17, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_2MA), "lcdc_en0" },
+ { GPIO_CFG(19, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_2MA), "dat_pwr_sv" },
+ { GPIO_CFG(20, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_2MA), "lvds_pwr_dn" },
+ { GPIO_CFG(22, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_2MA), "lcdc_en1" },
+ { GPIO_CFG(32, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_2MA), "lcdc_en2" },
+ { GPIO_CFG(103, 0, GPIO_INPUT, GPIO_NO_PULL, GPIO_2MA), "hdmi_irq" },
+ { GPIO_CFG(155, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_2MA), "hdmi_3v3" },
+};
+
+static struct msm_panel_common_pdata mdp_pdata = {
+ .gpio = 98,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &msm_fb_device,
+};
+
+
+static void __init msm_register_device(struct platform_device *pdev, void *data)
+{
+ int ret;
+
+ pdev->dev.platform_data = data;
+
+ ret = platform_device_register(pdev);
+ if (ret)
+ dev_err(&pdev->dev,
+ "%s: platform_device_register() failed = %d\n",
+ __func__, ret);
+}
+
+void __init msm_fb_register_device(char *name, void *data)
+{
+ if (!strncmp(name, "mdp", 3))
+ msm_register_device(&msm_mdp_device, data);
+/*
+ else if (!strncmp(name, "pmdh", 4))
+ msm_register_device(&msm_mddi_device, data);
+ else if (!strncmp(name, "emdh", 4))
+ msm_register_device(&msm_mddi_ext_device, data);
+ else if (!strncmp(name, "ebi2", 4))
+ msm_register_device(&msm_ebi2_lcd_device, data);
+ else if (!strncmp(name, "tvenc", 5))
+ msm_register_device(&msm_tvenc_device, data);
+ else */
+
+ if (!strncmp(name, "lcdc", 4))
+ msm_register_device(&msm_lcdc_device, data);
+ /*else
+ printk(KERN_ERR "%s: unknown device! %s\n", __func__, name);
+*/
+}
+
+static void __init msm_fb_add_devices(void)
+{
+ int rc;
+ msm_fb_register_device("mdp", &mdp_pdata);
+// msm_fb_register_device("pmdh", &mddi_pdata);
+// msm_fb_register_device("emdh", &mddi_pdata);
+// msm_fb_register_device("tvenc", 0);
+
+ if (machine_is_qsd8x50a_st1_5()) {
+/* rc = st15_hdmi_vreg_init();
+ if (rc)
+ return;
+*/
+ rc = msm_gpios_request_enable(
+ msm_fb_st15_gpio_config_data,
+ ARRAY_SIZE(msm_fb_st15_gpio_config_data));
+ if (rc) {
+ printk(KERN_ERR "%s: unable to init lcdc gpios\n",
+ __func__);
+ return;
+ }
+ msm_fb_register_device("lcdc", &lcdc_pdata);
+ } else
+ msm_fb_register_device("lcdc", 0);
+}
+
+int __init staging_init_pmem(void)
+{
+ qsd8x50_allocate_memory_regions();
+ return 0;
+}
+
+int __init staging_init_devices(void)
+{
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ msm_fb_add_devices();
+ return 0;
+}
+
+arch_initcall(staging_init_pmem);
+arch_initcall(staging_init_devices);
diff --git a/drivers/staging/msm/tv_ntsc.c b/drivers/staging/msm/tv_ntsc.c
new file mode 100644
index 0000000..5eb6761
--- /dev/null
+++ b/drivers/staging/msm/tv_ntsc.c
@@ -0,0 +1,163 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+
+#include "msm_fb.h"
+#include "tvenc.h"
+
+#define NTSC_TV_DIMENSION_WIDTH 720
+#define NTSC_TV_DIMENSION_HEIGHT 480
+
+static int ntsc_off(struct platform_device *pdev);
+static int ntsc_on(struct platform_device *pdev);
+
+static int ntsc_on(struct platform_device *pdev)
+{
+ uint32 reg = 0;
+ int ret = 0;
+ struct msm_fb_data_type *mfd;
+
+ mfd = platform_get_drvdata(pdev);
+
+ if (!mfd)
+ return -ENODEV;
+
+ if (mfd->key != MFD_KEY)
+ return -EINVAL;
+
+ TV_OUT(TV_ENC_CTL, 0); /* disable TV encoder */
+
+ if (mfd->panel.id == NTSC_M) {
+ /* Cr gain 11, Cb gain C6, y_gain 97 */
+ TV_OUT(TV_GAIN, 0x0081B697);
+ } else {
+ /* Cr gain 11, Cb gain C6, y_gain 97 */
+ TV_OUT(TV_GAIN, 0x008bc4a3);
+ reg |= TVENC_CTL_NTSCJ_MODE;
+ }
+
+ TV_OUT(TV_CGMS, 0x0);
+ /* NTSC Timing */
+ TV_OUT(TV_SYNC_1, 0x0020009e);
+ TV_OUT(TV_SYNC_2, 0x011306B4);
+ TV_OUT(TV_SYNC_3, 0x0006000C);
+ TV_OUT(TV_SYNC_4, 0x0028020D);
+ TV_OUT(TV_SYNC_5, 0x005E02FB);
+ TV_OUT(TV_SYNC_6, 0x0006000C);
+ TV_OUT(TV_SYNC_7, 0x00000012);
+ TV_OUT(TV_BURST_V1, 0x0013020D);
+ TV_OUT(TV_BURST_V2, 0x0014020C);
+ TV_OUT(TV_BURST_V3, 0x0013020D);
+ TV_OUT(TV_BURST_V4, 0x0014020C);
+ TV_OUT(TV_BURST_H, 0x00AE00F2);
+ TV_OUT(TV_SOL_REQ_ODD, 0x00280208);
+ TV_OUT(TV_SOL_REQ_EVEN, 0x00290209);
+
+ reg |= TVENC_CTL_TV_MODE_NTSC_M_PAL60;
+
+ reg |= TVENC_CTL_Y_FILTER_EN |
+ TVENC_CTL_CR_FILTER_EN |
+ TVENC_CTL_CB_FILTER_EN | TVENC_CTL_SINX_FILTER_EN;
+#ifdef CONFIG_FB_MSM_TVOUT_SVIDEO
+ reg |= TVENC_CTL_S_VIDEO_EN;
+#endif
+
+ TV_OUT(TV_LEVEL, 0x00000000); /* DC offset to 0. */
+ TV_OUT(TV_OFFSET, 0x008080f0);
+
+#ifdef CONFIG_FB_MSM_MDP31
+ TV_OUT(TV_DAC_INTF, 0x29);
+#endif
+ TV_OUT(TV_ENC_CTL, reg);
+
+ reg |= TVENC_CTL_ENC_EN;
+ TV_OUT(TV_ENC_CTL, reg);
+
+ return ret;
+}
+
+static int ntsc_off(struct platform_device *pdev)
+{
+ TV_OUT(TV_ENC_CTL, 0); /* disable TV encoder */
+ return 0;
+}
+
+static int __init ntsc_probe(struct platform_device *pdev)
+{
+ msm_fb_add_device(pdev);
+
+ return 0;
+}
+
+static struct platform_driver this_driver = {
+ .probe = ntsc_probe,
+ .driver = {
+ .name = "tv_ntsc",
+ },
+};
+
+static struct msm_fb_panel_data ntsc_panel_data = {
+ .panel_info.xres = NTSC_TV_DIMENSION_WIDTH,
+ .panel_info.yres = NTSC_TV_DIMENSION_HEIGHT,
+ .panel_info.type = TV_PANEL,
+ .panel_info.pdest = DISPLAY_1,
+ .panel_info.wait_cycle = 0,
+ .panel_info.bpp = 16,
+ .panel_info.fb_num = 2,
+ .on = ntsc_on,
+ .off = ntsc_off,
+};
+
+static struct platform_device this_device = {
+ .name = "tv_ntsc",
+ .id = 0,
+ .dev = {
+ .platform_data = &ntsc_panel_data,
+ }
+};
+
+static int __init ntsc_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&this_driver);
+ if (!ret) {
+ ret = platform_device_register(&this_device);
+ if (ret)
+ platform_driver_unregister(&this_driver);
+ }
+
+ return ret;
+}
+
+module_init(ntsc_init);
\ No newline at end of file
diff --git a/drivers/staging/msm/tv_pal.c b/drivers/staging/msm/tv_pal.c
new file mode 100644
index 0000000..204da51
--- /dev/null
+++ b/drivers/staging/msm/tv_pal.c
@@ -0,0 +1,213 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+
+#include "msm_fb.h"
+#include "tvenc.h"
+
+#ifdef CONFIG_FB_MSM_TVOUT_PAL_M
+#define PAL_TV_DIMENSION_WIDTH 720
+#define PAL_TV_DIMENSION_HEIGHT 480
+#else
+#define PAL_TV_DIMENSION_WIDTH 720
+#define PAL_TV_DIMENSION_HEIGHT 576
+#endif
+
+static int pal_on(struct platform_device *pdev)
+{
+ uint32 reg = 0;
+ int ret = 0;
+ struct msm_fb_data_type *mfd;
+
+ mfd = platform_get_drvdata(pdev);
+
+ if (!mfd)
+ return -ENODEV;
+
+ if (mfd->key != MFD_KEY)
+ return -EINVAL;
+
+ TV_OUT(TV_ENC_CTL, 0); /* disable TV encoder */
+
+ switch (mfd->panel.id) {
+ case PAL_BDGHIN:
+ /* Cr gain 11, Cb gain C6, y_gain 97 */
+ TV_OUT(TV_GAIN, 0x0088c1a0);
+ TV_OUT(TV_CGMS, 0x00012345);
+ TV_OUT(TV_TEST_MUX, 0x0);
+ /* PAL Timing */
+ TV_OUT(TV_SYNC_1, 0x00180097);
+ TV_OUT(TV_SYNC_2, 0x011f06c0);
+ TV_OUT(TV_SYNC_3, 0x0005000a);
+ TV_OUT(TV_SYNC_4, 0x00320271);
+ TV_OUT(TV_SYNC_5, 0x005602f9);
+ TV_OUT(TV_SYNC_6, 0x0005000a);
+ TV_OUT(TV_SYNC_7, 0x0000000f);
+ TV_OUT(TV_BURST_V1, 0x0012026e);
+ TV_OUT(TV_BURST_V2, 0x0011026d);
+ TV_OUT(TV_BURST_V3, 0x00100270);
+ TV_OUT(TV_BURST_V4, 0x0013026f);
+ TV_OUT(TV_BURST_H, 0x00af00ea);
+ TV_OUT(TV_SOL_REQ_ODD, 0x0030026e);
+ TV_OUT(TV_SOL_REQ_EVEN, 0x0031026f);
+
+ reg |= TVENC_CTL_TV_MODE_PAL_BDGHIN;
+ break;
+ case PAL_M:
+ /* Cr gain 11, Cb gain C6, y_gain 97 */
+ TV_OUT(TV_GAIN, 0x0081b697);
+ TV_OUT(TV_CGMS, 0x000af317);
+ TV_OUT(TV_TEST_MUX, 0x000001c3);
+ TV_OUT(TV_TEST_MODE, 0x00000002);
+ /* PAL Timing */
+ TV_OUT(TV_SYNC_1, 0x0020009e);
+ TV_OUT(TV_SYNC_2, 0x011306b4);
+ TV_OUT(TV_SYNC_3, 0x0006000c);
+ TV_OUT(TV_SYNC_4, 0x0028020D);
+ TV_OUT(TV_SYNC_5, 0x005e02fb);
+ TV_OUT(TV_SYNC_6, 0x0006000c);
+ TV_OUT(TV_SYNC_7, 0x00000012);
+ TV_OUT(TV_BURST_V1, 0x0012020b);
+ TV_OUT(TV_BURST_V2, 0x0016020c);
+ TV_OUT(TV_BURST_V3, 0x00150209);
+ TV_OUT(TV_BURST_V4, 0x0013020c);
+ TV_OUT(TV_BURST_H, 0x00bf010b);
+ TV_OUT(TV_SOL_REQ_ODD, 0x00280208);
+ TV_OUT(TV_SOL_REQ_EVEN, 0x00290209);
+
+ reg |= TVENC_CTL_TV_MODE_PAL_M;
+ break;
+ case PAL_N:
+ /* Cr gain 11, Cb gain C6, y_gain 97 */
+ TV_OUT(TV_GAIN, 0x0081b697);
+ TV_OUT(TV_CGMS, 0x000af317);
+ TV_OUT(TV_TEST_MUX, 0x000001c3);
+ TV_OUT(TV_TEST_MODE, 0x00000002);
+ /* PAL Timing */
+ TV_OUT(TV_SYNC_1, 0x00180097);
+ TV_OUT(TV_SYNC_2, 0x12006c0);
+ TV_OUT(TV_SYNC_3, 0x0005000a);
+ TV_OUT(TV_SYNC_4, 0x00320271);
+ TV_OUT(TV_SYNC_5, 0x005602f9);
+ TV_OUT(TV_SYNC_6, 0x0005000a);
+ TV_OUT(TV_SYNC_7, 0x0000000f);
+ TV_OUT(TV_BURST_V1, 0x0012026e);
+ TV_OUT(TV_BURST_V2, 0x0011026d);
+ TV_OUT(TV_BURST_V3, 0x00100270);
+ TV_OUT(TV_BURST_V4, 0x0013026f);
+ TV_OUT(TV_BURST_H, 0x00af00fa);
+ TV_OUT(TV_SOL_REQ_ODD, 0x0030026e);
+ TV_OUT(TV_SOL_REQ_EVEN, 0x0031026f);
+
+ reg |= TVENC_CTL_TV_MODE_PAL_N;
+ break;
+
+ default:
+ return -ENODEV;
+ }
+
+ reg |= TVENC_CTL_Y_FILTER_EN |
+ TVENC_CTL_CR_FILTER_EN |
+ TVENC_CTL_CB_FILTER_EN | TVENC_CTL_SINX_FILTER_EN;
+#ifdef CONFIG_FB_MSM_TVOUT_SVIDEO
+ reg |= TVENC_CTL_S_VIDEO_EN;
+#endif
+
+ TV_OUT(TV_LEVEL, 0x00000000); /* DC offset to 0. */
+ TV_OUT(TV_OFFSET, 0x008080f0);
+
+#ifdef CONFIG_FB_MSM_MDP31
+ TV_OUT(TV_DAC_INTF, 0x29);
+#endif
+ TV_OUT(TV_ENC_CTL, reg);
+
+ reg |= TVENC_CTL_ENC_EN;
+ TV_OUT(TV_ENC_CTL, reg);
+
+ return ret;
+}
+
+static int pal_off(struct platform_device *pdev)
+{
+ TV_OUT(TV_ENC_CTL, 0); /* disable TV encoder */
+ return 0;
+}
+
+static int __init pal_probe(struct platform_device *pdev)
+{
+ msm_fb_add_device(pdev);
+
+ return 0;
+}
+
+static struct platform_driver this_driver = {
+ .probe = pal_probe,
+ .driver = {
+ .name = "tv_pal",
+ },
+};
+
+static struct msm_fb_panel_data pal_panel_data = {
+ .panel_info.xres = PAL_TV_DIMENSION_WIDTH,
+ .panel_info.yres = PAL_TV_DIMENSION_HEIGHT,
+ .panel_info.type = TV_PANEL,
+ .panel_info.pdest = DISPLAY_1,
+ .panel_info.wait_cycle = 0,
+ .panel_info.bpp = 16,
+ .panel_info.fb_num = 2,
+ .on = pal_on,
+ .off = pal_off,
+};
+
+static struct platform_device this_device = {
+ .name = "tv_pal",
+ .id = 0,
+ .dev = {
+ .platform_data = &pal_panel_data,
+ }
+};
+
+static int __init pal_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&this_driver);
+ if (!ret) {
+ ret = platform_device_register(&this_device);
+ if (ret)
+ platform_driver_unregister(&this_driver);
+ }
+
+ return ret;
+}
+
+module_init(pal_init);
diff --git a/drivers/staging/msm/tvenc.c b/drivers/staging/msm/tvenc.c
new file mode 100644
index 0000000..f41c5ac
--- /dev/null
+++ b/drivers/staging/msm/tvenc.c
@@ -0,0 +1,295 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/pm_qos_params.h>
+
+#define TVENC_C
+#include "tvenc.h"
+#include "msm_fb.h"
+
+static int tvenc_probe(struct platform_device *pdev);
+static int tvenc_remove(struct platform_device *pdev);
+
+static int tvenc_off(struct platform_device *pdev);
+static int tvenc_on(struct platform_device *pdev);
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+
+static struct clk *tvenc_clk;
+static struct clk *tvdac_clk;
+
+static struct platform_driver tvenc_driver = {
+ .probe = tvenc_probe,
+ .remove = tvenc_remove,
+ .suspend = NULL,
+// .suspend_late = NULL,
+// .resume_early = NULL,
+ .resume = NULL,
+ .shutdown = NULL,
+ .driver = {
+ .name = "tvenc",
+ },
+};
+
+static struct tvenc_platform_data *tvenc_pdata;
+
+static int tvenc_off(struct platform_device *pdev)
+{
+ int ret = 0;
+
+ ret = panel_next_off(pdev);
+
+ clk_disable(tvenc_clk);
+ clk_disable(tvdac_clk);
+
+ if (tvenc_pdata && tvenc_pdata->pm_vid_en)
+ ret = tvenc_pdata->pm_vid_en(0);
+
+ //pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ , "tvenc",
+ // PM_QOS_DEFAULT_VALUE);
+
+ if (ret)
+ printk(KERN_ERR "%s: pm_vid_en(off) failed! %d\n",
+ __func__, ret);
+
+ return ret;
+}
+
+static int tvenc_on(struct platform_device *pdev)
+{
+ int ret = 0;
+
+// pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ , "tvenc",
+// 128000);
+ if (tvenc_pdata && tvenc_pdata->pm_vid_en)
+ ret = tvenc_pdata->pm_vid_en(1);
+
+ if (ret) {
+ printk(KERN_ERR "%s: pm_vid_en(on) failed! %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ clk_enable(tvenc_clk);
+ clk_enable(tvdac_clk);
+
+ ret = panel_next_on(pdev);
+
+ return ret;
+}
+
+void tvenc_gen_test_pattern(struct msm_fb_data_type *mfd)
+{
+ uint32 reg = 0, i;
+
+ reg = readl(MSM_TV_ENC_CTL);
+ reg |= TVENC_CTL_TEST_PATT_EN;
+
+ for (i = 0; i < 3; i++) {
+ TV_OUT(TV_ENC_CTL, 0); /* disable TV encoder */
+
+ switch (i) {
+ /*
+ * TV Encoder - Color Bar Test Pattern
+ */
+ case 0:
+ reg |= TVENC_CTL_TPG_CLRBAR;
+ break;
+ /*
+ * TV Encoder - Red Frame Test Pattern
+ */
+ case 1:
+ reg |= TVENC_CTL_TPG_REDCLR;
+ break;
+ /*
+ * TV Encoder - Modulated Ramp Test Pattern
+ */
+ default:
+ reg |= TVENC_CTL_TPG_MODRAMP;
+ break;
+ }
+
+ TV_OUT(TV_ENC_CTL, reg);
+ mdelay(5000);
+
+ switch (i) {
+ /*
+ * TV Encoder - Color Bar Test Pattern
+ */
+ case 0:
+ reg &= ~TVENC_CTL_TPG_CLRBAR;
+ break;
+ /*
+ * TV Encoder - Red Frame Test Pattern
+ */
+ case 1:
+ reg &= ~TVENC_CTL_TPG_REDCLR;
+ break;
+ /*
+ * TV Encoder - Modulated Ramp Test Pattern
+ */
+ default:
+ reg &= ~TVENC_CTL_TPG_MODRAMP;
+ break;
+ }
+ }
+}
+
+static int tvenc_resource_initialized;
+
+static int tvenc_probe(struct platform_device *pdev)
+{
+ struct msm_fb_data_type *mfd;
+ struct platform_device *mdp_dev = NULL;
+ struct msm_fb_panel_data *pdata = NULL;
+ int rc;
+
+ if (pdev->id == 0) {
+ tvenc_base = ioremap(pdev->resource[0].start,
+ pdev->resource[0].end -
+ pdev->resource[0].start + 1);
+ if (!tvenc_base) {
+ printk(KERN_ERR
+ "tvenc_base ioremap failed!\n");
+ return -ENOMEM;
+ }
+ tvenc_pdata = pdev->dev.platform_data;
+ tvenc_resource_initialized = 1;
+ return 0;
+ }
+
+ if (!tvenc_resource_initialized)
+ return -EPERM;
+
+ mfd = platform_get_drvdata(pdev);
+
+ if (!mfd)
+ return -ENODEV;
+
+ if (mfd->key != MFD_KEY)
+ return -EINVAL;
+
+ if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+ return -ENOMEM;
+
+ if (tvenc_base == NULL)
+ return -ENOMEM;
+
+ mdp_dev = platform_device_alloc("mdp", pdev->id);
+ if (!mdp_dev)
+ return -ENOMEM;
+
+ /*
+ * link to the latest pdev
+ */
+ mfd->pdev = mdp_dev;
+ mfd->dest = DISPLAY_TV;
+
+ /*
+ * alloc panel device data
+ */
+ if (platform_device_add_data
+ (mdp_dev, pdev->dev.platform_data,
+ sizeof(struct msm_fb_panel_data))) {
+ printk(KERN_ERR "tvenc_probe: platform_device_add_data failed!\n");
+ platform_device_put(mdp_dev);
+ return -ENOMEM;
+ }
+ /*
+ * data chain
+ */
+ pdata = mdp_dev->dev.platform_data;
+ pdata->on = tvenc_on;
+ pdata->off = tvenc_off;
+ pdata->next = pdev;
+
+ /*
+ * get/set panel specific fb info
+ */
+ mfd->panel_info = pdata->panel_info;
+ mfd->fb_imgType = MDP_YCRYCB_H2V1;
+
+ /*
+ * set driver data
+ */
+ platform_set_drvdata(mdp_dev, mfd);
+
+ /*
+ * register in mdp driver
+ */
+ rc = platform_device_add(mdp_dev);
+ if (rc)
+ goto tvenc_probe_err;
+
+ pdev_list[pdev_list_cnt++] = pdev;
+ return 0;
+
+tvenc_probe_err:
+ platform_device_put(mdp_dev);
+ return rc;
+}
+
+static int tvenc_remove(struct platform_device *pdev)
+{
+// pm_qos_remove_requirement(PM_QOS_SYSTEM_BUS_FREQ , "tvenc");
+ return 0;
+}
+
+static int tvenc_register_driver(void)
+{
+ return platform_driver_register(&tvenc_driver);
+}
+
+static int __init tvenc_driver_init(void)
+{
+ tvenc_clk = clk_get(NULL, "tv_enc_clk");
+ tvdac_clk = clk_get(NULL, "tv_dac_clk");
+
+ if (IS_ERR(tvenc_clk)) {
+ printk(KERN_ERR "error: can't get tvenc_clk!\n");
+ return IS_ERR(tvenc_clk);
+ }
+
+ if (IS_ERR(tvdac_clk)) {
+ printk(KERN_ERR "error: can't get tvdac_clk!\n");
+ return IS_ERR(tvdac_clk);
+ }
+
+// pm_qos_add_requirement(PM_QOS_SYSTEM_BUS_FREQ , "tvenc",
+// PM_QOS_DEFAULT_VALUE);
+ return tvenc_register_driver();
+}
+
+module_init(tvenc_driver_init);
diff --git a/drivers/staging/msm/tvenc.h b/drivers/staging/msm/tvenc.h
new file mode 100644
index 0000000..a682dbe
--- /dev/null
+++ b/drivers/staging/msm/tvenc.h
@@ -0,0 +1,117 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Code Aurora nor
+ * the names of its contributors may be used to endorse or promote
+ * products derived from this software without specific prior written
+ * permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef TVENC_H
+#define TVENC_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+
+#include "msm_fb_panel.h"
+
+#define NTSC_M 0 /* North America, Korea */
+#define NTSC_J 1 /* Japan */
+#define PAL_BDGHIN 2 /* Non-argentina PAL-N */
+#define PAL_M 3 /* PAL-M */
+#define PAL_N 4 /* Argentina PAL-N */
+
+/* 3.57954545 Mhz */
+#define TVENC_CTL_TV_MODE_NTSC_M_PAL60 0
+/* 3.57961149 Mhz */
+#define TVENC_CTL_TV_MODE_PAL_M BIT(0)
+/*non-Argintina = 4.3361875 Mhz */
+#define TVENC_CTL_TV_MODE_PAL_BDGHIN BIT(1)
+/*Argentina = 3.582055625 Mhz */
+#define TVENC_CTL_TV_MODE_PAL_N (BIT(1)|BIT(0))
+
+#define TVENC_CTL_ENC_EN BIT(2)
+#define TVENC_CTL_CC_EN BIT(3)
+#define TVENC_CTL_CGMS_EN BIT(4)
+#define TVENC_CTL_MACRO_EN BIT(5)
+#define TVENC_CTL_Y_FILTER_W_NOTCH BIT(6)
+#define TVENC_CTL_Y_FILTER_WO_NOTCH 0
+#define TVENC_CTL_Y_FILTER_EN BIT(7)
+#define TVENC_CTL_CR_FILTER_EN BIT(8)
+#define TVENC_CTL_CB_FILTER_EN BIT(9)
+#define TVENC_CTL_SINX_FILTER_EN BIT(10)
+#define TVENC_CTL_TEST_PATT_EN BIT(11)
+#define TVENC_CTL_OUTPUT_INV BIT(12)
+#define TVENC_CTL_PAL60_MODE BIT(13)
+#define TVENC_CTL_NTSCJ_MODE BIT(14)
+#define TVENC_CTL_TPG_CLRBAR 0
+#define TVENC_CTL_TPG_MODRAMP BIT(15)
+#define TVENC_CTL_TPG_REDCLR BIT(16)
+#define TVENC_CTL_S_VIDEO_EN BIT(19)
+
+#ifdef TVENC_C
+void *tvenc_base;
+#else
+extern void *tvenc_base;
+#endif
+
+#define TV_OUT(reg, v) writel(v, tvenc_base + MSM_##reg)
+
+#define MSM_TV_ENC_CTL 0x00
+#define MSM_TV_LEVEL 0x04
+#define MSM_TV_GAIN 0x08
+#define MSM_TV_OFFSET 0x0c
+#define MSM_TV_CGMS 0x10
+#define MSM_TV_SYNC_1 0x14
+#define MSM_TV_SYNC_2 0x18
+#define MSM_TV_SYNC_3 0x1c
+#define MSM_TV_SYNC_4 0x20
+#define MSM_TV_SYNC_5 0x24
+#define MSM_TV_SYNC_6 0x28
+#define MSM_TV_SYNC_7 0x2c
+#define MSM_TV_BURST_V1 0x30
+#define MSM_TV_BURST_V2 0x34
+#define MSM_TV_BURST_V3 0x38
+#define MSM_TV_BURST_V4 0x3c
+#define MSM_TV_BURST_H 0x40
+#define MSM_TV_SOL_REQ_ODD 0x44
+#define MSM_TV_SOL_REQ_EVEN 0x48
+#define MSM_TV_DAC_CTL 0x4c
+#define MSM_TV_TEST_MUX 0x50
+#define MSM_TV_TEST_MODE 0x54
+#define MSM_TV_TEST_MISR_RESET 0x58
+#define MSM_TV_TEST_EXPORT_MISR 0x5c
+#define MSM_TV_TEST_MISR_CURR_VAL 0x60
+#define MSM_TV_TEST_SOF_CFG 0x64
+#define MSM_TV_DAC_INTF 0x100
+
+#endif /* TVENC_H */
diff --git a/drivers/staging/phison/Kconfig b/drivers/staging/phison/Kconfig
index d3c65d3..1b56119 100644
--- a/drivers/staging/phison/Kconfig
+++ b/drivers/staging/phison/Kconfig
@@ -1,5 +1,5 @@
config IDE_PHISON
tristate "PCIE ATA PS5000 IDE support"
- depends on PCI && ATA && ATA_SFF
+ depends on PCI && ATA && ATA_SFF && ATA_BMDMA
---help---
This is an experimental driver for PS5000 IDE driver.
diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index 9286e86..643b413 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -29,7 +29,6 @@
#include <linux/slab.h>
#include <linux/statfs.h>
#include <linux/writeback.h>
-#include <linux/quotaops.h>
#include "netfs.h"
@@ -880,7 +879,7 @@
/*
* We want fsync() to work on POHMELFS.
*/
-static int pohmelfs_fsync(struct file *file, struct dentry *dentry, int datasync)
+static int pohmelfs_fsync(struct file *file, int datasync)
{
struct inode *inode = file->f_mapping->host;
struct writeback_control wbc = {
@@ -969,13 +968,6 @@
goto err_out_exit;
}
- if ((attr->ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) ||
- (attr->ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid)) {
- err = dquot_transfer(inode, attr);
- if (err)
- goto err_out_exit;
- }
-
err = inode_setattr(inode, attr);
if (err) {
dprintk("%s: ino: %llu, failed to set the attributes.\n", __func__, POHMELFS_I(inode)->ino);
diff --git a/drivers/staging/rt2860/sta_ioctl.c b/drivers/staging/rt2860/sta_ioctl.c
index 112da7a..6b8268d 100644
--- a/drivers/staging/rt2860/sta_ioctl.c
+++ b/drivers/staging/rt2860/sta_ioctl.c
@@ -2522,6 +2522,8 @@
Status =
copy_to_user(erq->pointer, pAd->nickname,
erq->length);
+ if (Status)
+ Status = -EFAULT;
break;
}
case SIOCGIWRATE: /*get default bit rate (bps) */
diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c
index b740662..674769d 100644
--- a/drivers/staging/rt2860/usb_main_dev.c
+++ b/drivers/staging/rt2860/usb_main_dev.c
@@ -77,6 +77,7 @@
{USB_DEVICE(0x083A, 0x7522)}, /* Arcadyan */
{USB_DEVICE(0x0CDE, 0x0022)}, /* ZCOM */
{USB_DEVICE(0x0586, 0x3416)}, /* Zyxel */
+ {USB_DEVICE(0x0586, 0x341a)}, /* Zyxel NWD-270N */
{USB_DEVICE(0x0CDE, 0x0025)}, /* Zyxel */
{USB_DEVICE(0x1740, 0x9701)}, /* EnGenius */
{USB_DEVICE(0x1740, 0x9702)}, /* EnGenius */
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index dacefea..49ab9fa 100644
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -66,8 +66,6 @@
static int hwwep = 0;
static int channels = 0x3fff;
-#define eqMacAddr(a, b) (((a)[0] == (b)[0] && (a)[1] == (b)[1] && (a)[2] == (b)[2] && (a)[3] == (b)[3] && (a)[4] == (b)[4] && (a)[5] == (b)[5]) ? 1 : 0)
-#define cpMacAddr(des, src) ((des)[0] = (src)[0], (des)[1] = (src)[1], (des)[2] = (src)[2], (des)[3] = (src)[3], (des)[4] = (src)[4], (des)[5] = (src)[5])
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, rtl8180_pci_id_tbl);
MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c
index 447d647..1b68906 100644
--- a/drivers/staging/rtl8192su/r8192U_core.c
+++ b/drivers/staging/rtl8192su/r8192U_core.c
@@ -112,28 +112,29 @@
#define CAM_CONTENT_COUNT 8
static const struct usb_device_id rtl8192_usb_id_tbl[] = {
- /* Realtek */
- {USB_DEVICE(0x0bda, 0x8171)},
- {USB_DEVICE(0x0bda, 0x8192)},
- {USB_DEVICE(0x0bda, 0x8709)},
- /* Corega */
- {USB_DEVICE(0x07aa, 0x0043)},
- /* Belkin */
- {USB_DEVICE(0x050d, 0x805E)},
- {USB_DEVICE(0x050d, 0x815F)}, /* Belkin F5D8053 v6 */
- /* Sitecom */
- {USB_DEVICE(0x0df6, 0x0031)},
- {USB_DEVICE(0x0df6, 0x004b)}, /* WL-349 */
- /* EnGenius */
- {USB_DEVICE(0x1740, 0x9201)},
- /* Dlink */
- {USB_DEVICE(0x2001, 0x3301)},
- /* Zinwell */
- {USB_DEVICE(0x5a57, 0x0290)},
- /* Guillemot */
- {USB_DEVICE(0x06f8, 0xe031)},
- //92SU
+ {USB_DEVICE(0x0bda, 0x8171)}, /* Realtek */
{USB_DEVICE(0x0bda, 0x8172)},
+ {USB_DEVICE(0x0bda, 0x8173)},
+ {USB_DEVICE(0x0bda, 0x8174)},
+ {USB_DEVICE(0x0bda, 0x8712)},
+ {USB_DEVICE(0x0bda, 0x8713)},
+ {USB_DEVICE(0x07aa, 0x0047)},
+ {USB_DEVICE(0x07d1, 0x3303)},
+ {USB_DEVICE(0x07d1, 0x3302)},
+ {USB_DEVICE(0x07d1, 0x3300)},
+ {USB_DEVICE(0x1740, 0x9603)},
+ {USB_DEVICE(0x1740, 0x9605)},
+ {USB_DEVICE(0x050d, 0x815F)},
+ {USB_DEVICE(0x06f8, 0xe031)},
+ {USB_DEVICE(0x7392, 0x7611)},
+ {USB_DEVICE(0x7392, 0x7612)},
+ {USB_DEVICE(0x7392, 0x7622)},
+ {USB_DEVICE(0x0DF6, 0x0045)},
+ {USB_DEVICE(0x0E66, 0x0015)},
+ {USB_DEVICE(0x0E66, 0x0016)},
+ {USB_DEVICE(0x0b05, 0x1786)},
+ /* these are not in the official list */
+ {USB_DEVICE(0x0df6, 0x004b)}, /* WL-349 */
{}
};
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 2bede27..f38472c 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -121,6 +121,8 @@
{USB_DEVICE(0x2001, 0x3301)},
/* Zinwell */
{USB_DEVICE(0x5a57, 0x0290)},
+ /* LG */
+ {USB_DEVICE(0x043e, 0x7a01)},
{}
};
diff --git a/drivers/staging/sep/sep_driver.c b/drivers/staging/sep/sep_driver.c
index 0332c37..ecbde34 100644
--- a/drivers/staging/sep/sep_driver.c
+++ b/drivers/staging/sep/sep_driver.c
@@ -594,8 +594,10 @@
dbg("SEP Driver:--------> sep_allocate_data_pool_memory_handler start\n");
error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_alloc_t));
- if (error)
+ if (error) {
+ error = -EFAULT;
goto end_function;
+ }
/* allocate memory */
if ((sep->data_pool_bytes_allocated + command_args.num_bytes) > SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) {
@@ -609,8 +611,10 @@
/* write the memory back to the user space */
error = copy_to_user((void *) arg, (void *) &command_args, sizeof(struct sep_driver_alloc_t));
- if (error)
+ if (error) {
+ error = -EFAULT;
goto end_function;
+ }
/* set the allocation */
sep->data_pool_bytes_allocated += command_args.num_bytes;
@@ -661,6 +665,8 @@
}
/* copy the application data */
error = copy_from_user(virt_address, (void *) app_in_address, num_bytes);
+ if (error)
+ error = -EFAULT;
end_function:
dbg("SEP Driver:<-------- sep_write_into_data_pool_handler end\n");
return error;
@@ -711,6 +717,8 @@
/* copy the application data */
error = copy_to_user((void *) app_out_address, virt_address, num_bytes);
+ if (error)
+ error = -EFAULT;
end_function:
dbg("SEP Driver:<-------- sep_read_from_data_pool_handler end\n");
return error;
@@ -1448,8 +1456,10 @@
dbg("SEP Driver:--------> sep_create_sync_dma_tables_handler start\n");
error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_build_sync_table_t));
- if (error)
+ if (error) {
+ error = -EFAULT;
goto end_function;
+ }
edbg("app_in_address is %08lx\n", command_args.app_in_address);
edbg("app_out_address is %08lx\n", command_args.app_out_address);
@@ -1799,8 +1809,10 @@
goto end_function;
error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_build_flow_table_t));
- if (error)
+ if (error) {
+ error = -EFAULT;
goto end_function;
+ }
/* create flow tables */
error = sep_prepare_flow_dma_tables(sep, command_args.num_virtual_buffers, command_args.virt_buff_data_addr, flow_context_ptr, &first_table_data, &last_table_data, command_args.isKernelVirtualAddress);
@@ -1819,8 +1831,10 @@
/* send the parameters to user application */
error = copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_build_flow_table_t));
- if (error)
+ if (error) {
+ error = -EFAULT;
goto end_function_with_error;
+ }
/* all the flow created - update the flow entry with temp id */
flow_context_ptr->flow_id = SEP_TEMP_FLOW_ID;
@@ -1861,8 +1875,10 @@
/* get input parameters */
error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_add_flow_table_t));
- if (error)
+ if (error) {
+ error = -EFAULT;
goto end_function;
+ }
/* find the flow structure for the flow id */
flow_context_ptr = sep_find_flow_context(sep, command_args.flow_id);
@@ -1933,6 +1949,8 @@
/* send the parameters to user application */
error = copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_add_flow_table_t));
+ if (error)
+ error = -EFAULT;
end_function_with_error:
/* free the allocated tables */
sep_deallocated_flow_tables(&first_table_data);
@@ -1953,8 +1971,10 @@
dbg("SEP Driver:--------> sep_add_flow_tables_message_handler start\n");
error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_add_message_t));
- if (error)
+ if (error) {
+ error = -EFAULT;
goto end_function;
+ }
/* check input */
if (command_args.message_size_in_bytes > SEP_MAX_ADD_MESSAGE_LENGTH_IN_BYTES) {
@@ -1970,6 +1990,8 @@
/* copy the message into context */
flow_context_ptr->message_size_in_bytes = command_args.message_size_in_bytes;
error = copy_from_user(flow_context_ptr->message, (void *) command_args.message_address, command_args.message_size_in_bytes);
+ if (error)
+ error = -EFAULT;
end_function:
dbg("SEP Driver:<-------- sep_add_flow_tables_message_handler end\n");
return error;
@@ -1994,6 +2016,8 @@
/* send the parameters to user application */
error = copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_static_pool_addr_t));
+ if (error)
+ error = -EFAULT;
dbg("SEP Driver:<-------- sep_get_static_pool_addr_handler end\n");
return error;
}
@@ -2010,8 +2034,10 @@
dbg("SEP Driver:--------> sep_get_physical_mapped_offset_handler start\n");
error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_get_mapped_offset_t));
- if (error)
+ if (error) {
+ error = -EFAULT;
goto end_function;
+ }
if (command_args.physical_address < sep->shared_bus) {
error = -EINVAL;
@@ -2025,6 +2051,8 @@
/* send the parameters to user application */
error = copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_get_mapped_offset_t));
+ if (error)
+ error = -EFAULT;
end_function:
dbg("SEP Driver:<-------- sep_get_physical_mapped_offset_handler end\n");
return error;
@@ -2070,11 +2098,11 @@
error = 0;
error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_init_t));
-
- dbg("SEP Driver:--------> sep_init_handler - finished copy_from_user \n");
-
- if (error)
+ if (error) {
+ error = -EFAULT;
goto end_function;
+ }
+ dbg("SEP Driver:--------> sep_init_handler - finished copy_from_user\n");
/* PATCH - configure the DMA to single -burst instead of multi-burst */
/*sep_configure_dma_burst(); */
diff --git a/drivers/staging/tm6000/Kconfig b/drivers/staging/tm6000/Kconfig
index 5fe759c..3657e33 100644
--- a/drivers/staging/tm6000/Kconfig
+++ b/drivers/staging/tm6000/Kconfig
@@ -2,7 +2,8 @@
tristate "TV Master TM5600/6000/6010 driver"
depends on VIDEO_DEV && I2C && INPUT && USB && EXPERIMENTAL
select VIDEO_TUNER
- select TUNER_XC2028
+ select MEDIA_TUNER_XC2028
+ select MEDIA_TUNER_XC5000
select VIDEOBUF_VMALLOC
help
Support for TM5600/TM6000/TM6010 USB Device
diff --git a/drivers/staging/tm6000/tm6000-alsa.c b/drivers/staging/tm6000/tm6000-alsa.c
index bc89f9d..273e26e 100644
--- a/drivers/staging/tm6000/tm6000-alsa.c
+++ b/drivers/staging/tm6000/tm6000-alsa.c
@@ -15,6 +15,7 @@
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/usb.h>
+#include <linux/slab.h>
#include <asm/delay.h>
#include <sound/core.h>
@@ -410,5 +411,28 @@
snd_card_free(card);
return rc;
}
-EXPORT_SYMBOL_GPL(tm6000_audio_init);
+static int tm6000_audio_fini(struct tm6000_core *dev)
+{
+ return 0;
+}
+
+struct tm6000_ops audio_ops = {
+ .id = TM6000_AUDIO,
+ .name = "TM6000 Audio Extension",
+ .init = tm6000_audio_init,
+ .fini = tm6000_audio_fini,
+};
+
+static int __init tm6000_alsa_register(void)
+{
+ return tm6000_register_extension(&audio_ops);
+}
+
+static void __exit tm6000_alsa_unregister(void)
+{
+ tm6000_unregister_extension(&audio_ops);
+}
+
+module_init(tm6000_alsa_register);
+module_exit(tm6000_alsa_unregister);
diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c
index 6143e20..6a9ae40 100644
--- a/drivers/staging/tm6000/tm6000-cards.c
+++ b/drivers/staging/tm6000/tm6000-cards.c
@@ -24,6 +24,7 @@
#include <linux/i2c.h>
#include <linux/usb.h>
#include <linux/version.h>
+#include <linux/slab.h>
#include <media/v4l2-common.h>
#include <media/tuner.h>
#include <media/tvaudio.h>
@@ -363,13 +364,7 @@
tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
0x02, arg);
msleep(10);
- rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- TM6000_GPIO_CLK, 0);
- if (rc < 0)
- return rc;
- msleep(10);
- rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- TM6000_GPIO_CLK, 1);
+ rc = tm6000_i2c_reset(dev, 10);
break;
case XC2028_TUNER_RESET:
/* Reset codes during load firmware */
@@ -423,14 +418,7 @@
break;
case 2:
- rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- TM6000_GPIO_CLK, 0);
- if (rc < 0)
- return rc;
- msleep(100);
- rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- TM6000_GPIO_CLK, 1);
- msleep(100);
+ rc = tm6000_i2c_reset(dev, 100);
break;
}
}
@@ -563,7 +551,7 @@
switch (dev->tuner_type) {
case TUNER_XC2028:
- tun_setup.tuner_callback = tm6000_tuner_callback;;
+ tun_setup.tuner_callback = tm6000_tuner_callback;
break;
case TUNER_XC5000:
tun_setup.tuner_callback = tm6000_xc5000_callback;
@@ -692,6 +680,10 @@
if (rc < 0)
goto err;
+ tm6000_add_into_devlist(dev);
+
+ tm6000_init_extension(dev);
+
if (dev->caps.has_dvb) {
dev->dvb = kzalloc(sizeof(*(dev->dvb)), GFP_KERNEL);
if (!dev->dvb) {
@@ -921,6 +913,25 @@
}
#endif
+ if (dev->gpio.power_led) {
+ switch (dev->model) {
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ /* Power led off */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x01);
+ msleep(15);
+ break;
+ case TM6010_BOARD_BEHOLD_WANDER:
+ case TM6010_BOARD_BEHOLD_VOYAGER:
+ /* Power led off */
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x00);
+ msleep(15);
+ break;
+ }
+ }
tm6000_v4l2_unregister(dev);
tm6000_i2c_unregister(dev);
@@ -931,6 +942,9 @@
usb_put_dev(dev->udev);
+ tm6000_remove_from_devlist(dev);
+ tm6000_close_extension(dev);
+
mutex_unlock(&dev->lock);
kfree(dev);
}
diff --git a/drivers/staging/tm6000/tm6000-core.c b/drivers/staging/tm6000/tm6000-core.c
index bfbc53b..c3690e3 100644
--- a/drivers/staging/tm6000/tm6000-core.c
+++ b/drivers/staging/tm6000/tm6000-core.c
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/i2c.h>
#include "tm6000.h"
@@ -153,6 +154,22 @@
return buf[3] | buf[2] << 8 | buf[1] << 16 | buf[0] << 24;
}
+int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep)
+{
+ int rc;
+
+ rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 0);
+ if (rc < 0)
+ return rc;
+
+ msleep(tsleep);
+
+ rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 1);
+ msleep(tsleep);
+
+ return rc;
+}
+
void tm6000_set_fourcc_format(struct tm6000_core *dev)
{
if (dev->dev_type == TM6010) {
@@ -323,6 +340,12 @@
tm6000_set_standard (dev, &dev->norm);
tm6000_set_audio_bitrate (dev,48000);
+ /* switch dvb led off */
+ if (dev->gpio.dvb_led) {
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.dvb_led, 0x01);
+ }
+
return 0;
}
@@ -375,6 +398,13 @@
tm6000_set_reg (dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x00);
msleep(100);
}
+
+ /* switch dvb led on */
+ if (dev->gpio.dvb_led) {
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.dvb_led, 0x00);
+ }
+
return 0;
}
@@ -600,3 +630,95 @@
return val;
}
EXPORT_SYMBOL_GPL(tm6000_set_audio_bitrate);
+
+static LIST_HEAD(tm6000_devlist);
+static DEFINE_MUTEX(tm6000_devlist_mutex);
+
+/*
+ * tm6000_realease_resource()
+ */
+
+void tm6000_remove_from_devlist(struct tm6000_core *dev)
+{
+ mutex_lock(&tm6000_devlist_mutex);
+ list_del(&dev->devlist);
+ mutex_unlock(&tm6000_devlist_mutex);
+};
+
+void tm6000_add_into_devlist(struct tm6000_core *dev)
+{
+ mutex_lock(&tm6000_devlist_mutex);
+ list_add_tail(&dev->devlist, &tm6000_devlist);
+ mutex_unlock(&tm6000_devlist_mutex);
+};
+
+/*
+ * Extension interface
+ */
+
+static LIST_HEAD(tm6000_extension_devlist);
+static DEFINE_MUTEX(tm6000_extension_devlist_lock);
+
+int tm6000_register_extension(struct tm6000_ops *ops)
+{
+ struct tm6000_core *dev = NULL;
+
+ mutex_lock(&tm6000_devlist_mutex);
+ mutex_lock(&tm6000_extension_devlist_lock);
+ list_add_tail(&ops->next, &tm6000_extension_devlist);
+ list_for_each_entry(dev, &tm6000_devlist, devlist) {
+ if (dev)
+ ops->init(dev);
+ }
+ printk(KERN_INFO "tm6000: Initialized (%s) extension\n", ops->name);
+ mutex_unlock(&tm6000_extension_devlist_lock);
+ mutex_unlock(&tm6000_devlist_mutex);
+ return 0;
+}
+EXPORT_SYMBOL(tm6000_register_extension);
+
+void tm6000_unregister_extension(struct tm6000_ops *ops)
+{
+ struct tm6000_core *dev = NULL;
+
+ mutex_lock(&tm6000_devlist_mutex);
+ list_for_each_entry(dev, &tm6000_devlist, devlist) {
+ if (dev)
+ ops->fini(dev);
+ }
+
+ mutex_lock(&tm6000_extension_devlist_lock);
+ printk(KERN_INFO "tm6000: Remove (%s) extension\n", ops->name);
+ list_del(&ops->next);
+ mutex_unlock(&tm6000_extension_devlist_lock);
+ mutex_unlock(&tm6000_devlist_mutex);
+}
+EXPORT_SYMBOL(tm6000_unregister_extension);
+
+void tm6000_init_extension(struct tm6000_core *dev)
+{
+ struct tm6000_ops *ops = NULL;
+
+ mutex_lock(&tm6000_extension_devlist_lock);
+ if (!list_empty(&tm6000_extension_devlist)) {
+ list_for_each_entry(ops, &tm6000_extension_devlist, next) {
+ if (ops->init)
+ ops->init(dev);
+ }
+ }
+ mutex_unlock(&tm6000_extension_devlist_lock);
+}
+
+void tm6000_close_extension(struct tm6000_core *dev)
+{
+ struct tm6000_ops *ops = NULL;
+
+ mutex_lock(&tm6000_extension_devlist_lock);
+ if (!list_empty(&tm6000_extension_devlist)) {
+ list_for_each_entry(ops, &tm6000_extension_devlist, next) {
+ if (ops->fini)
+ ops->fini(dev);
+ }
+ }
+ mutex_unlock(&tm6000_extension_devlist_lock);
+}
diff --git a/drivers/staging/tm6000/tm6000-dvb.c b/drivers/staging/tm6000/tm6000-dvb.c
index eafc89c..86c1c8b 100644
--- a/drivers/staging/tm6000/tm6000-dvb.c
+++ b/drivers/staging/tm6000/tm6000-dvb.c
@@ -18,6 +18,7 @@
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include "tm6000.h"
@@ -28,6 +29,7 @@
#include <media/tuner.h>
#include "tuner-xc2028.h"
+#include "xc5000.h"
static void inline print_err_status (struct tm6000_core *dev,
int packet, int status)
@@ -100,7 +102,10 @@
printk(KERN_INFO "tm6000: got start stream request %s\n",__FUNCTION__);
- tm6000_init_digital_mode(dev);
+ if (dev->mode != TM6000_MODE_DIGITAL) {
+ tm6000_init_digital_mode(dev);
+ dev->mode = TM6000_MODE_DIGITAL;
+ }
dvb->bulk_urb = usb_alloc_urb(0, GFP_KERNEL);
if(dvb->bulk_urb == NULL) {
@@ -254,27 +259,55 @@
dvb->adapter.priv = dev;
if (dvb->frontend) {
- struct xc2028_config cfg = {
- .i2c_adap = &dev->i2c_adap,
- .i2c_addr = dev->tuner_addr,
- };
+ switch (dev->tuner_type) {
+ case TUNER_XC2028: {
+ struct xc2028_config cfg = {
+ .i2c_adap = &dev->i2c_adap,
+ .i2c_addr = dev->tuner_addr,
+ };
- dvb->frontend->callback = tm6000_tuner_callback;
- ret = dvb_register_frontend(&dvb->adapter, dvb->frontend);
- if (ret < 0) {
- printk(KERN_ERR
- "tm6000: couldn't register frontend\n");
- goto adapter_err;
- }
+ dvb->frontend->callback = tm6000_tuner_callback;
+ ret = dvb_register_frontend(&dvb->adapter, dvb->frontend);
+ if (ret < 0) {
+ printk(KERN_ERR
+ "tm6000: couldn't register frontend\n");
+ goto adapter_err;
+ }
- if (!dvb_attach(xc2028_attach, dvb->frontend, &cfg)) {
- printk(KERN_ERR "tm6000: couldn't register "
- "frontend (xc3028)\n");
- ret = -EINVAL;
- goto frontend_err;
+ if (!dvb_attach(xc2028_attach, dvb->frontend, &cfg)) {
+ printk(KERN_ERR "tm6000: couldn't register "
+ "frontend (xc3028)\n");
+ ret = -EINVAL;
+ goto frontend_err;
+ }
+ printk(KERN_INFO "tm6000: XC2028/3028 asked to be "
+ "attached to frontend!\n");
+ break;
+ }
+ case TUNER_XC5000: {
+ struct xc5000_config cfg = {
+ .i2c_address = dev->tuner_addr,
+ };
+
+ dvb->frontend->callback = tm6000_xc5000_callback;
+ ret = dvb_register_frontend(&dvb->adapter, dvb->frontend);
+ if (ret < 0) {
+ printk(KERN_ERR
+ "tm6000: couldn't register frontend\n");
+ goto adapter_err;
+ }
+
+ if (!dvb_attach(xc5000_attach, dvb->frontend, &dev->i2c_adap, &cfg)) {
+ printk(KERN_ERR "tm6000: couldn't register "
+ "frontend (xc5000)\n");
+ ret = -EINVAL;
+ goto frontend_err;
+ }
+ printk(KERN_INFO "tm6000: XC5000 asked to be "
+ "attached to frontend!\n");
+ break;
+ }
}
- printk(KERN_INFO "tm6000: XC2028/3028 asked to be "
- "attached to frontend!\n");
} else {
printk(KERN_ERR "tm6000: no frontend found\n");
}
diff --git a/drivers/staging/tm6000/tm6000-video.c b/drivers/staging/tm6000/tm6000-video.c
index f2b7fe4..56fa371 100644
--- a/drivers/staging/tm6000/tm6000-video.c
+++ b/drivers/staging/tm6000/tm6000-video.c
@@ -48,7 +48,7 @@
#define TM6000_MIN_BUF 4
#define TM6000_DEF_BUF 8
-#define TM6000_MAX_ISO_PACKETS 40 /* Max number of ISO packets */
+#define TM6000_MAX_ISO_PACKETS 46 /* Max number of ISO packets */
/* Declare static vars that will be used as parameters */
static unsigned int vid_limit = 16; /* Video memory limit, in Mb */
@@ -205,7 +205,11 @@
c = (header >> 24) & 0xff;
/* split the header fields */
- size = (((header & 0x7e) << 1) -1) *4;
+ size = ((header & 0x7e) << 1);
+
+ if (size > 0)
+ size -= 4;
+
block = (header >> 7) & 0xf;
field = (header >> 11) & 0x1;
line = (header >> 12) & 0x1ff;
@@ -307,10 +311,12 @@
case TM6000_URB_MSG_PTS:
break;
case TM6000_URB_MSG_AUDIO:
-/* Need some code to process audio */
-printk ("%ld: cmd=%s, size=%d\n", jiffies,
+ /* Need some code to process audio */
+ printk ("%ld: cmd=%s, size=%d\n", jiffies,
tm6000_msg_type[cmd],size);
break;
+ case TM6000_URB_MSG_VBI:
+ break;
default:
dprintk (dev, V4L2_DEBUG_ISOC, "cmd=%s, size=%d\n",
tm6000_msg_type[cmd],size);
@@ -333,14 +339,23 @@
return rc;
}
-static int copy_streams(u8 *data, u8 *out_p, unsigned long len,
- struct urb *urb, struct tm6000_buffer **buf)
+static int copy_streams(u8 *data, unsigned long len,
+ struct urb *urb)
{
struct tm6000_dmaqueue *dma_q = urb->context;
struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq);
u8 *ptr=data, *endp=data+len;
unsigned long header=0;
int rc=0;
+ struct tm6000_buffer *buf;
+ char *outp = NULL;
+
+ get_next_buf(dma_q, &buf);
+ if (buf)
+ outp = videobuf_to_vmalloc(&buf->vb);
+
+ if (!outp)
+ return 0;
for (ptr=data; ptr<endp;) {
if (!dev->isoc_ctl.cmd) {
@@ -388,14 +403,14 @@
}
HEADER:
/* Copy or continue last copy */
- rc=copy_packet(urb,header,&ptr,endp,out_p,buf);
+ rc=copy_packet(urb,header,&ptr,endp,outp,&buf);
if (rc<0) {
buf=NULL;
printk(KERN_ERR "tm6000: buffer underrun at %ld\n",
jiffies);
return rc;
}
- if (!*buf)
+ if (!buf)
return 0;
}
@@ -404,31 +419,40 @@
/*
* Identify the tm5600/6000 buffer header type and properly handles
*/
-static int copy_multiplexed(u8 *ptr, u8 *out_p, unsigned long len,
- struct urb *urb, struct tm6000_buffer **buf)
+static int copy_multiplexed(u8 *ptr, unsigned long len,
+ struct urb *urb)
{
struct tm6000_dmaqueue *dma_q = urb->context;
struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq);
unsigned int pos=dev->isoc_ctl.pos,cpysize;
int rc=1;
+ struct tm6000_buffer *buf;
+ char *outp = NULL;
+
+ get_next_buf(dma_q, &buf);
+ if (buf)
+ outp = videobuf_to_vmalloc(&buf->vb);
+
+ if (!outp)
+ return 0;
while (len>0) {
- cpysize=min(len,(*buf)->vb.size-pos);
-//printk("Copying %d bytes (max=%lu) from %p to %p[%u]\n",cpysize,(*buf)->vb.size,ptr,out_p,pos);
- memcpy(&out_p[pos], ptr, cpysize);
+ cpysize=min(len,buf->vb.size-pos);
+ //printk("Copying %d bytes (max=%lu) from %p to %p[%u]\n",cpysize,(*buf)->vb.size,ptr,out_p,pos);
+ memcpy(&outp[pos], ptr, cpysize);
pos+=cpysize;
ptr+=cpysize;
len-=cpysize;
- if (pos >= (*buf)->vb.size) {
+ if (pos >= buf->vb.size) {
pos=0;
/* Announces that a new buffer were filled */
- buffer_filled (dev, dma_q, *buf);
+ buffer_filled (dev, dma_q, buf);
dprintk(dev, V4L2_DEBUG_ISOC, "new buffer filled\n");
- get_next_buf (dma_q, buf);
- if (!*buf)
+ get_next_buf (dma_q, &buf);
+ if (!buf)
break;
- out_p = videobuf_to_vmalloc(&((*buf)->vb));
- if (!out_p)
+ outp = videobuf_to_vmalloc(&(buf->vb));
+ if (!outp)
return rc;
pos = 0;
}
@@ -487,52 +511,36 @@
struct tm6000_dmaqueue *dma_q = urb->context;
struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq);
struct tm6000_buffer *buf;
- int i, len=0, rc=1;
- int size;
- char *outp = NULL, *p;
- unsigned long copied;
+ int i, len=0, rc=1, status;
+ char *p;
- get_next_buf(dma_q, &buf);
- if (buf)
- outp = videobuf_to_vmalloc(&buf->vb);
-
- if (!outp)
- return 0;
-
- size = buf->vb.size;
-
- copied=0;
-
- if (urb->status<0) {
- print_err_status (dev,-1,urb->status);
+ if (urb->status < 0) {
+ print_err_status (dev, -1, urb->status);
return 0;
}
for (i = 0; i < urb->number_of_packets; i++) {
- int status = urb->iso_frame_desc[i].status;
+ status = urb->iso_frame_desc[i].status;
if (status<0) {
print_err_status (dev,i,status);
continue;
}
- len=urb->iso_frame_desc[i].actual_length;
+ len = urb->iso_frame_desc[i].actual_length;
-// if (len>=TM6000_URB_MSG_LEN) {
- p=urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+ if (len > 0) {
+ p = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
if (!urb->iso_frame_desc[i].status) {
- if ((buf->fmt->fourcc)==V4L2_PIX_FMT_TM6000) {
- rc=copy_multiplexed(p, outp, len, urb, &buf);
+ if ((dev->fourcc)==V4L2_PIX_FMT_TM6000) {
+ rc=copy_multiplexed(p, len, urb);
if (rc<=0)
return rc;
} else {
- copy_streams(p, outp, len, urb, &buf);
+ copy_streams(p, len, urb);
}
}
- copied += len;
- if (copied >= size || !buf)
- break;
-// }
+ }
}
return rc;
}
@@ -612,7 +620,7 @@
static int tm6000_prepare_isoc(struct tm6000_core *dev, unsigned int framesize)
{
struct tm6000_dmaqueue *dma_q = &dev->vidq;
- int i, j, sb_size, pipe, size, max_packets, num_bufs = 5;
+ int i, j, sb_size, pipe, size, max_packets, num_bufs = 8;
struct urb *urb;
/* De-allocates all pending stuff */
diff --git a/drivers/staging/tm6000/tm6000.h b/drivers/staging/tm6000/tm6000.h
index 6812d68..7bbaf26 100644
--- a/drivers/staging/tm6000/tm6000.h
+++ b/drivers/staging/tm6000/tm6000.h
@@ -168,6 +168,10 @@
struct i2c_adapter i2c_adap;
struct i2c_client i2c_client;
+
+ /* extension */
+ struct list_head devlist;
+
/* video for linux */
int users;
@@ -203,6 +207,16 @@
spinlock_t slock;
};
+#define TM6000_AUDIO 0x10
+
+struct tm6000_ops {
+ struct list_head next;
+ char *name;
+ int id;
+ int (*init)(struct tm6000_core *);
+ int (*fini)(struct tm6000_core *);
+};
+
struct tm6000_fh {
struct tm6000_core *dev;
@@ -232,6 +246,8 @@
int tm6000_get_reg16(struct tm6000_core *dev, u8 req, u16 value, u16 index);
int tm6000_get_reg32(struct tm6000_core *dev, u8 req, u16 value, u16 index);
int tm6000_set_reg (struct tm6000_core *dev, u8 req, u16 value, u16 index);
+int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep);
+
int tm6000_init (struct tm6000_core *dev);
int tm6000_init_analog_mode (struct tm6000_core *dev);
@@ -246,6 +262,13 @@
int tm6000_v4l2_exit(void);
void tm6000_set_fourcc_format(struct tm6000_core *dev);
+void tm6000_remove_from_devlist(struct tm6000_core *dev);
+void tm6000_add_into_devlist(struct tm6000_core *dev);
+int tm6000_register_extension(struct tm6000_ops *ops);
+void tm6000_unregister_extension(struct tm6000_ops *ops);
+void tm6000_init_extension(struct tm6000_core *dev);
+void tm6000_close_extension(struct tm6000_core *dev);
+
/* In tm6000-stds.c */
void tm6000_get_std_res(struct tm6000_core *dev);
int tm6000_set_standard (struct tm6000_core *dev, v4l2_std_id *norm);
@@ -275,7 +298,7 @@
int tm6000_queue_init(struct tm6000_core *dev);
/* In tm6000-alsa.c */
-int tm6000_audio_init(struct tm6000_core *dev, int idx);
+/*int tm6000_audio_init(struct tm6000_core *dev, int idx);*/
/* Debug stuff */
diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c
index 5240816..6a499f0 100644
--- a/drivers/staging/usbip/usbip_common.c
+++ b/drivers/staging/usbip/usbip_common.c
@@ -378,47 +378,67 @@
complete_and_exit(&ut->thread_done, 0);
}
+static void stop_rx_thread(struct usbip_device *ud)
+{
+ if (ud->tcp_rx.thread != NULL) {
+ send_sig(SIGKILL, ud->tcp_rx.thread, 1);
+ wait_for_completion(&ud->tcp_rx.thread_done);
+ usbip_udbg("rx_thread for ud %p has finished\n", ud);
+ }
+}
+
+static void stop_tx_thread(struct usbip_device *ud)
+{
+ if (ud->tcp_tx.thread != NULL) {
+ send_sig(SIGKILL, ud->tcp_tx.thread, 1);
+ wait_for_completion(&ud->tcp_tx.thread_done);
+ usbip_udbg("tx_thread for ud %p has finished\n", ud);
+ }
+}
+
int usbip_start_threads(struct usbip_device *ud)
{
/*
* threads are invoked per one device (per one connection).
*/
struct task_struct *th;
+ int err = 0;
th = kthread_run(usbip_thread, (void *)&ud->tcp_rx, "usbip");
if (IS_ERR(th)) {
printk(KERN_WARNING
"Unable to start control thread\n");
- return PTR_ERR(th);
+ err = PTR_ERR(th);
+ goto ust_exit;
}
+
th = kthread_run(usbip_thread, (void *)&ud->tcp_tx, "usbip");
if (IS_ERR(th)) {
printk(KERN_WARNING
"Unable to start control thread\n");
- return PTR_ERR(th);
+ err = PTR_ERR(th);
+ goto tx_thread_err;
}
/* confirm threads are starting */
wait_for_completion(&ud->tcp_rx.thread_done);
wait_for_completion(&ud->tcp_tx.thread_done);
+
return 0;
+
+tx_thread_err:
+ stop_rx_thread(ud);
+
+ust_exit:
+ return err;
}
EXPORT_SYMBOL_GPL(usbip_start_threads);
void usbip_stop_threads(struct usbip_device *ud)
{
/* kill threads related to this sdev, if v.c. exists */
- if (ud->tcp_rx.thread != NULL) {
- send_sig(SIGKILL, ud->tcp_rx.thread, 1);
- wait_for_completion(&ud->tcp_rx.thread_done);
- usbip_udbg("rx_thread for ud %p has finished\n", ud);
- }
-
- if (ud->tcp_tx.thread != NULL) {
- send_sig(SIGKILL, ud->tcp_tx.thread, 1);
- wait_for_completion(&ud->tcp_tx.thread_done);
- usbip_udbg("tx_thread for ud %p has finished\n", ud);
- }
+ stop_rx_thread(ud);
+ stop_tx_thread(ud);
}
EXPORT_SYMBOL_GPL(usbip_stop_threads);
diff --git a/drivers/staging/vme/bridges/vme_ca91cx42.c b/drivers/staging/vme/bridges/vme_ca91cx42.c
index 0c82eb4..0f9ea58 100644
--- a/drivers/staging/vme/bridges/vme_ca91cx42.c
+++ b/drivers/staging/vme/bridges/vme_ca91cx42.c
@@ -523,7 +523,7 @@
}
if (image->bus_resource.name == NULL) {
- image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_KERNEL);
+ image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC);
if (image->bus_resource.name == NULL) {
dev_err(ca91cx42_bridge->parent, "Unable to allocate "
"memory for resource name\n");
diff --git a/drivers/staging/vme/bridges/vme_tsi148.c b/drivers/staging/vme/bridges/vme_tsi148.c
index abe88a3..f09cac1 100644
--- a/drivers/staging/vme/bridges/vme_tsi148.c
+++ b/drivers/staging/vme/bridges/vme_tsi148.c
@@ -828,7 +828,7 @@
return 0;
if (image->bus_resource.name == NULL) {
- image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_KERNEL);
+ image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC);
if (image->bus_resource.name == NULL) {
dev_err(tsi148_bridge->parent, "Unable to allocate "
"memory for resource name\n");
diff --git a/drivers/staging/wlags49_h2/Kconfig b/drivers/staging/wlags49_h2/Kconfig
index b6fc2ca..3efcbf8 100644
--- a/drivers/staging/wlags49_h2/Kconfig
+++ b/drivers/staging/wlags49_h2/Kconfig
@@ -1,9 +1,11 @@
config WLAGS49_H2
tristate "Agere Systems HERMES II Wireless PC Card Model 0110"
- depends on WLAN && WIRELESS_EXT && PCMCIA
+ depends on WLAN && PCMCIA
+ select WIRELESS_EXT
select WEXT_SPY
+ select WEXT_PRIV
---help---
- Driver for wireless cards using Agere's HERMES II chipset
- which are identified with Manufacture ID: 0156,0003
- The software is a modified version of wl_lkm_722_abg.tar.gz
- from the Agere Systems website, addapted for Ubuntu 9.04.
+ Driver for wireless cards using Agere's HERMES II chipset
+ which are identified with Manufacture ID: 0156,0003
+ The software is a modified version of wl_lkm_722_abg.tar.gz
+ from the Agere Systems website, addapted for Ubuntu 9.04.
diff --git a/drivers/staging/wlags49_h2/wl_enc.c b/drivers/staging/wlags49_h2/wl_enc.c
index 48c44c8..26cf548 100644
--- a/drivers/staging/wlags49_h2/wl_enc.c
+++ b/drivers/staging/wlags49_h2/wl_enc.c
@@ -62,6 +62,7 @@
/*******************************************************************************
* include files
******************************************************************************/
+#include <linux/string.h>
#include <wl_version.h>
#include <debug.h>
diff --git a/drivers/staging/wlags49_h2/wl_sysfs.h b/drivers/staging/wlags49_h2/wl_sysfs.h
index 6d96d03..fa658c3 100644
--- a/drivers/staging/wlags49_h2/wl_sysfs.h
+++ b/drivers/staging/wlags49_h2/wl_sysfs.h
@@ -2,6 +2,6 @@
extern void register_wlags_sysfs(struct net_device *);
extern void unregister_wlags_sysfs(struct net_device *);
#else
-static void register_wlags_sysfs(struct net_device *) { return; };
-static void unregister_wlags_sysfs(struct net_device *) { return; };
+static inline void register_wlags_sysfs(struct net_device *net) { }
+static inline void unregister_wlags_sysfs(struct net_device *net) { }
#endif
diff --git a/drivers/staging/wlags49_h25/Kconfig b/drivers/staging/wlags49_h25/Kconfig
index dcc1709..bf5664a 100644
--- a/drivers/staging/wlags49_h25/Kconfig
+++ b/drivers/staging/wlags49_h25/Kconfig
@@ -1,9 +1,11 @@
config WLAGS49_H25
tristate "Linksys HERMES II.5 WCF54G_Wireless-G_CompactFlash_Card"
- depends on WLAN && WIRELESS_EXT && PCMCIA
+ depends on WLAN && PCMCIA
+ select WIRELESS_EXT
select WEXT_SPY
+ select WEXT_PRIV
---help---
- Driver for wireless cards using Agere's HERMES II.5 chipset
- which are identified with Manufacture ID: 0156,0004
- The software is a modified version of wl_lkm_722_abg.tar.gz
- from the Agere Systems website, addapted for Ubuntu 9.04.
+ Driver for wireless cards using Agere's HERMES II.5 chipset
+ which are identified with Manufacture ID: 0156,0004
+ The software is a modified version of wl_lkm_722_abg.tar.gz
+ from the Agere Systems website, addapted for Ubuntu 9.04.
diff --git a/drivers/staging/xgifb/Kconfig b/drivers/staging/xgifb/Kconfig
new file mode 100644
index 0000000..bb0ca59
--- /dev/null
+++ b/drivers/staging/xgifb/Kconfig
@@ -0,0 +1,11 @@
+config FB_XGI
+ tristate "XGI display support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This driver supports notebooks with XGI Z7,Z9,Z11 PCI chips.
+ Say Y if you have such a graphics card.
+ To compile this driver as a module, choose M here: the
+ module will be called xgifb.ko
diff --git a/drivers/staging/xgifb/Makefile b/drivers/staging/xgifb/Makefile
new file mode 100644
index 0000000..2a31770
--- /dev/null
+++ b/drivers/staging/xgifb/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_FB_XGI) += xgifb.o
+
+xgifb-objs := XGI_main_26.o XGI_accel.o vb_init.o vb_setmode.o vb_util.o vb_ext.o
+
diff --git a/drivers/staging/xgifb/TODO b/drivers/staging/xgifb/TODO
new file mode 100644
index 0000000..7d71019
--- /dev/null
+++ b/drivers/staging/xgifb/TODO
@@ -0,0 +1,15 @@
+This drivers still need a lot of work. I can list all cleanups to do but it's
+going to be long. So, I'm writing "cleanups" and not the list.
+
+Arnaud
+
+TODO:
+- clean ups
+- fix build warnings when module
+- sort out dup ids with SiS driver
+- remove useless/wrong/unused #ifdef/code/...
+- fix printk usages
+- get rid of non-linux related stuff
+
+Please send patches to:
+Arnaud Patard <apatard@mandriva.com>
diff --git a/drivers/staging/xgifb/XGI.h b/drivers/staging/xgifb/XGI.h
new file mode 100644
index 0000000..87803dd
--- /dev/null
+++ b/drivers/staging/xgifb/XGI.h
@@ -0,0 +1,10 @@
+#ifndef _XGI_H
+#define _XGI_H
+
+#if 1
+#define TWDEBUG(x)
+#else
+#define TWDEBUG(x) printk(KERN_INFO x "\n");
+#endif
+
+#endif
diff --git a/drivers/staging/xgifb/XGI_accel.c b/drivers/staging/xgifb/XGI_accel.c
new file mode 100644
index 0000000..86ec342
--- /dev/null
+++ b/drivers/staging/xgifb/XGI_accel.c
@@ -0,0 +1,596 @@
+/*
+ * XGI 300/630/730/540/315/550/650/740 frame buffer driver
+ * for Linux kernels 2.4.x and 2.5.x
+ *
+ * 2D acceleration part
+ *
+ * Based on the X driver's XGI300_accel.c which is
+ * Copyright Xavier Ducoin <x.ducoin@lectra.com>
+ * Copyright 2002 by Thomas Winischhofer, Vienna, Austria
+ * and XGI310_accel.c which is
+ * Copyright 2002 by Thomas Winischhofer, Vienna, Austria
+ *
+ * Author: Thomas Winischhofer <thomas@winischhofer.net>
+ * (see http://www.winischhofer.net/
+ * for more information and updates)
+ */
+
+//#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/console.h>
+#include <linux/selection.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/vt_kern.h>
+#include <linux/capability.h>
+#include <linux/fs.h>
+#include <linux/agp_backend.h>
+
+#include <linux/types.h>
+/*
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+#include <linux/XGIfb.h>
+#else
+#include <video/XGIfb.h>
+#endif
+*/
+#include <asm/io.h>
+
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+#include <video/fbcon.h>
+#include <video/fbcon-cfb8.h>
+#include <video/fbcon-cfb16.h>
+#include <video/fbcon-cfb24.h>
+#include <video/fbcon-cfb32.h>
+#endif
+
+#include "osdef.h"
+#include "vgatypes.h"
+#include "vb_struct.h"
+#include "XGIfb.h"
+#include "XGI_accel.h"
+
+
+extern struct video_info xgi_video_info;
+extern int XGIfb_accel;
+
+static const int XGIALUConv[] =
+{
+ 0x00, /* dest = 0; 0, GXclear, 0 */
+ 0x88, /* dest &= src; DSa, GXand, 0x1 */
+ 0x44, /* dest = src & ~dest; SDna, GXandReverse, 0x2 */
+ 0xCC, /* dest = src; S, GXcopy, 0x3 */
+ 0x22, /* dest &= ~src; DSna, GXandInverted, 0x4 */
+ 0xAA, /* dest = dest; D, GXnoop, 0x5 */
+ 0x66, /* dest = ^src; DSx, GXxor, 0x6 */
+ 0xEE, /* dest |= src; DSo, GXor, 0x7 */
+ 0x11, /* dest = ~src & ~dest; DSon, GXnor, 0x8 */
+ 0x99, /* dest ^= ~src ; DSxn, GXequiv, 0x9 */
+ 0x55, /* dest = ~dest; Dn, GXInvert, 0xA */
+ 0xDD, /* dest = src|~dest ; SDno, GXorReverse, 0xB */
+ 0x33, /* dest = ~src; Sn, GXcopyInverted, 0xC */
+ 0xBB, /* dest |= ~src; DSno, GXorInverted, 0xD */
+ 0x77, /* dest = ~src|~dest; DSan, GXnand, 0xE */
+ 0xFF, /* dest = 0xFF; 1, GXset, 0xF */
+};
+/* same ROP but with Pattern as Source */
+static const int XGIPatALUConv[] =
+{
+ 0x00, /* dest = 0; 0, GXclear, 0 */
+ 0xA0, /* dest &= src; DPa, GXand, 0x1 */
+ 0x50, /* dest = src & ~dest; PDna, GXandReverse, 0x2 */
+ 0xF0, /* dest = src; P, GXcopy, 0x3 */
+ 0x0A, /* dest &= ~src; DPna, GXandInverted, 0x4 */
+ 0xAA, /* dest = dest; D, GXnoop, 0x5 */
+ 0x5A, /* dest = ^src; DPx, GXxor, 0x6 */
+ 0xFA, /* dest |= src; DPo, GXor, 0x7 */
+ 0x05, /* dest = ~src & ~dest; DPon, GXnor, 0x8 */
+ 0xA5, /* dest ^= ~src ; DPxn, GXequiv, 0x9 */
+ 0x55, /* dest = ~dest; Dn, GXInvert, 0xA */
+ 0xF5, /* dest = src|~dest ; PDno, GXorReverse, 0xB */
+ 0x0F, /* dest = ~src; Pn, GXcopyInverted, 0xC */
+ 0xAF, /* dest |= ~src; DPno, GXorInverted, 0xD */
+ 0x5F, /* dest = ~src|~dest; DPan, GXnand, 0xE */
+ 0xFF, /* dest = 0xFF; 1, GXset, 0xF */
+};
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,34)
+static const unsigned char myrops[] = {
+ 3, 10, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3
+ };
+#endif
+
+/* 300 series */
+#if 0
+static void
+XGI300Sync(void)
+{
+ XGI300Idle
+}
+#endif
+static void
+XGI310Sync(void)
+{
+ XGI310Idle
+}
+#if 0
+static void
+XGI300SetupForScreenToScreenCopy(int xdir, int ydir, int rop,
+ unsigned int planemask, int trans_color)
+{
+ XGI300SetupDSTColorDepth(xgi_video_info.DstColor);
+ XGI300SetupSRCPitch(xgi_video_info.video_linelength)
+ XGI300SetupDSTRect(xgi_video_info.video_linelength, 0xFFF)
+
+ if(trans_color != -1) {
+ XGI300SetupROP(0x0A)
+ XGI300SetupSRCTrans(trans_color)
+ XGI300SetupCMDFlag(TRANSPARENT_BITBLT)
+ } else {
+ XGI300SetupROP(XGIALUConv[rop])
+ }
+ if(xdir > 0) {
+ XGI300SetupCMDFlag(X_INC)
+ }
+ if(ydir > 0) {
+ XGI300SetupCMDFlag(Y_INC)
+ }
+}
+
+static void
+XGI300SubsequentScreenToScreenCopy(int src_x, int src_y, int dst_x, int dst_y,
+ int width, int height)
+{
+ long srcbase, dstbase;
+
+ srcbase = dstbase = 0;
+ if (src_y >= 2048) {
+ srcbase = xgi_video_info.video_linelength * src_y;
+ src_y = 0;
+ }
+ if (dst_y >= 2048) {
+ dstbase = xgi_video_info.video_linelength * dst_y;
+ dst_y = 0;
+ }
+
+ XGI300SetupSRCBase(srcbase);
+ XGI300SetupDSTBase(dstbase);
+
+ if(!(xgi_video_info.CommandReg & X_INC)) {
+ src_x += width-1;
+ dst_x += width-1;
+ }
+ if(!(xgi_video_info.CommandReg & Y_INC)) {
+ src_y += height-1;
+ dst_y += height-1;
+ }
+ XGI300SetupRect(width, height)
+ XGI300SetupSRCXY(src_x, src_y)
+ XGI300SetupDSTXY(dst_x, dst_y)
+ XGI300DoCMD
+}
+
+static void
+XGI300SetupForSolidFill(int color, int rop, unsigned int planemask)
+{
+ XGI300SetupPATFG(color)
+ XGI300SetupDSTRect(xgi_video_info.video_linelength, 0xFFF)
+ XGI300SetupDSTColorDepth(xgi_video_info.DstColor);
+ XGI300SetupROP(XGIPatALUConv[rop])
+ XGI300SetupCMDFlag(PATFG)
+}
+
+static void
+XGI300SubsequentSolidFillRect(int x, int y, int w, int h)
+{
+ long dstbase;
+
+ dstbase = 0;
+ if(y >= 2048) {
+ dstbase = xgi_video_info.video_linelength * y;
+ y = 0;
+ }
+ XGI300SetupDSTBase(dstbase)
+ XGI300SetupDSTXY(x,y)
+ XGI300SetupRect(w,h)
+ XGI300SetupCMDFlag(X_INC | Y_INC | BITBLT)
+ XGI300DoCMD
+}
+#endif
+/* 310/325 series ------------------------------------------------ */
+
+static void
+XGI310SetupForScreenToScreenCopy(int xdir, int ydir, int rop,
+ unsigned int planemask, int trans_color)
+{
+ XGI310SetupDSTColorDepth(xgi_video_info.DstColor);
+ XGI310SetupSRCPitch(xgi_video_info.video_linelength)
+ XGI310SetupDSTRect(xgi_video_info.video_linelength, 0xFFF)
+ if (trans_color != -1) {
+ XGI310SetupROP(0x0A)
+ XGI310SetupSRCTrans(trans_color)
+ XGI310SetupCMDFlag(TRANSPARENT_BITBLT)
+ } else {
+ XGI310SetupROP(XGIALUConv[rop])
+ /* Set command - not needed, both 0 */
+ /* XGISetupCMDFlag(BITBLT | SRCVIDEO) */
+ }
+ XGI310SetupCMDFlag(xgi_video_info.XGI310_AccelDepth)
+ /* TW: The 310/325 series is smart enough to know the direction */
+}
+
+static void
+XGI310SubsequentScreenToScreenCopy(int src_x, int src_y, int dst_x, int dst_y,
+ int width, int height)
+{
+ long srcbase, dstbase;
+ int mymin, mymax;
+
+ srcbase = dstbase = 0;
+ mymin = min(src_y, dst_y);
+ mymax = max(src_y, dst_y);
+
+ /* Although the chip knows the direction to use
+ * if the source and destination areas overlap,
+ * that logic fails if we fiddle with the bitmap
+ * addresses. Therefore, we check if the source
+ * and destination blitting areas overlap and
+ * adapt the bitmap addresses synchronously
+ * if the coordinates exceed the valid range.
+ * The the areas do not overlap, we do our
+ * normal check.
+ */
+ if((mymax - mymin) < height) {
+ if((src_y >= 2048) || (dst_y >= 2048)) {
+ srcbase = xgi_video_info.video_linelength * mymin;
+ dstbase = xgi_video_info.video_linelength * mymin;
+ src_y -= mymin;
+ dst_y -= mymin;
+ }
+ } else {
+ if(src_y >= 2048) {
+ srcbase = xgi_video_info.video_linelength * src_y;
+ src_y = 0;
+ }
+ if(dst_y >= 2048) {
+ dstbase = xgi_video_info.video_linelength * dst_y;
+ dst_y = 0;
+ }
+ }
+
+ XGI310SetupSRCBase(srcbase);
+ XGI310SetupDSTBase(dstbase);
+ XGI310SetupRect(width, height)
+ XGI310SetupSRCXY(src_x, src_y)
+ XGI310SetupDSTXY(dst_x, dst_y)
+ XGI310DoCMD
+}
+
+static void
+XGI310SetupForSolidFill(int color, int rop, unsigned int planemask)
+{
+ XGI310SetupPATFG(color)
+ XGI310SetupDSTRect(xgi_video_info.video_linelength, 0xFFF)
+ XGI310SetupDSTColorDepth(xgi_video_info.DstColor);
+ XGI310SetupROP(XGIPatALUConv[rop])
+ XGI310SetupCMDFlag(PATFG | xgi_video_info.XGI310_AccelDepth)
+}
+
+static void
+XGI310SubsequentSolidFillRect(int x, int y, int w, int h)
+{
+ long dstbase;
+
+ dstbase = 0;
+ if(y >= 2048) {
+ dstbase = xgi_video_info.video_linelength * y;
+ y = 0;
+ }
+ XGI310SetupDSTBase(dstbase)
+ XGI310SetupDSTXY(x,y)
+ XGI310SetupRect(w,h)
+ XGI310SetupCMDFlag(BITBLT)
+ XGI310DoCMD
+}
+
+/* --------------------------------------------------------------------- */
+
+/* The exported routines */
+
+int XGIfb_initaccel(void)
+{
+#ifdef XGIFB_USE_SPINLOCKS
+ spin_lock_init(&xgi_video_info.lockaccel);
+#endif
+ return(0);
+}
+
+void XGIfb_syncaccel(void)
+{
+
+ XGI310Sync();
+
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,34) /* --- KERNEL 2.5.34 and later --- */
+
+int fbcon_XGI_sync(struct fb_info *info)
+{
+ if(!XGIfb_accel) return 0;
+ CRITFLAGS
+
+ XGI310Sync();
+
+ CRITEND
+ return 0;
+}
+
+void fbcon_XGI_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+ int col=0;
+ CRITFLAGS
+
+
+ if(!rect->width || !rect->height)
+ return;
+
+ if(!XGIfb_accel) {
+ cfb_fillrect(info, rect);
+ return;
+ }
+
+ switch(info->var.bits_per_pixel) {
+ case 8: col = rect->color;
+ break;
+ case 16: col = ((u32 *)(info->pseudo_palette))[rect->color];
+ break;
+ case 32: col = ((u32 *)(info->pseudo_palette))[rect->color];
+ break;
+ }
+
+
+ CRITBEGIN
+ XGI310SetupForSolidFill(col, myrops[rect->rop], 0);
+ XGI310SubsequentSolidFillRect(rect->dx, rect->dy, rect->width, rect->height);
+ CRITEND
+ XGI310Sync();
+
+
+}
+
+void fbcon_XGI_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+{
+ int xdir, ydir;
+ CRITFLAGS
+
+
+ if(!XGIfb_accel) {
+ cfb_copyarea(info, area);
+ return;
+ }
+
+ if(!area->width || !area->height)
+ return;
+
+ if(area->sx < area->dx) xdir = 0;
+ else xdir = 1;
+ if(area->sy < area->dy) ydir = 0;
+ else ydir = 1;
+
+ CRITBEGIN
+ XGI310SetupForScreenToScreenCopy(xdir, ydir, 3, 0, -1);
+ XGI310SubsequentScreenToScreenCopy(area->sx, area->sy, area->dx, area->dy, area->width, area->height);
+ CRITEND
+ XGI310Sync();
+
+}
+
+#endif
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,33) /* ------ KERNEL <2.5.34 ------ */
+
+void fbcon_XGI_bmove(struct display *p, int srcy, int srcx,
+ int dsty, int dstx, int height, int width)
+{
+ int xdir, ydir;
+ CRITFLAGS
+
+ if(!xgi_video_info.accel) {
+ switch(xgi_video_info.video_bpp) {
+ case 8:
+#ifdef FBCON_HAS_CFB8
+ fbcon_cfb8_bmove(p, srcy, srcx, dsty, dstx, height, width);
+#endif
+ break;
+ case 16:
+#ifdef FBCON_HAS_CFB16
+ fbcon_cfb16_bmove(p, srcy, srcx, dsty, dstx, height, width);
+#endif
+ break;
+ case 32:
+#ifdef FBCON_HAS_CFB32
+ fbcon_cfb32_bmove(p, srcy, srcx, dsty, dstx, height, width);
+#endif
+ break;
+ }
+ return;
+ }
+
+ srcx *= fontwidth(p);
+ srcy *= fontheight(p);
+ dstx *= fontwidth(p);
+ dsty *= fontheight(p);
+ width *= fontwidth(p);
+ height *= fontheight(p);
+
+ if(srcx < dstx) xdir = 0;
+ else xdir = 1;
+ if(srcy < dsty) ydir = 0;
+ else ydir = 1;
+
+
+ CRITBEGIN
+ XGI310SetupForScreenToScreenCopy(xdir, ydir, 3, 0, -1);
+ XGI310SubsequentScreenToScreenCopy(srcx, srcy, dstx, dsty, width, height);
+ CRITEND
+ XGI310Sync();
+#if 0
+ printk(KERN_INFO "XGI_bmove sx %d sy %d dx %d dy %d w %d h %d\n",
+ srcx, srcy, dstx, dsty, width, height);
+#endif
+
+}
+
+
+static void fbcon_XGI_clear(struct vc_data *conp, struct display *p,
+ int srcy, int srcx, int height, int width, int color)
+{
+ CRITFLAGS
+
+ srcx *= fontwidth(p);
+ srcy *= fontheight(p);
+ width *= fontwidth(p);
+ height *= fontheight(p);
+
+
+ CRITBEGIN
+ XGI310SetupForSolidFill(color, 3, 0);
+ XGI310SubsequentSolidFillRect(srcx, srcy, width, height);
+ CRITEND
+ XGI310Sync();
+
+}
+
+void fbcon_XGI_clear8(struct vc_data *conp, struct display *p,
+ int srcy, int srcx, int height, int width)
+{
+ u32 bgx;
+
+ if(!xgi_video_info.accel) {
+#ifdef FBCON_HAS_CFB8
+ fbcon_cfb8_clear(conp, p, srcy, srcx, height, width);
+#endif
+ return;
+ }
+
+ bgx = attr_bgcol_ec(p, conp);
+ fbcon_XGI_clear(conp, p, srcy, srcx, height, width, bgx);
+}
+
+void fbcon_XGI_clear16(struct vc_data *conp, struct display *p,
+ int srcy, int srcx, int height, int width)
+{
+ u32 bgx;
+ if(!xgi_video_info.accel) {
+#ifdef FBCON_HAS_CFB16
+ fbcon_cfb16_clear(conp, p, srcy, srcx, height, width);
+#endif
+ return;
+ }
+
+ bgx = ((u_int16_t*)p->dispsw_data)[attr_bgcol_ec(p, conp)];
+ fbcon_XGI_clear(conp, p, srcy, srcx, height, width, bgx);
+}
+
+void fbcon_XGI_clear32(struct vc_data *conp, struct display *p,
+ int srcy, int srcx, int height, int width)
+{
+ u32 bgx;
+
+ if(!xgi_video_info.accel) {
+#ifdef FBCON_HAS_CFB32
+ fbcon_cfb32_clear(conp, p, srcy, srcx, height, width);
+#endif
+ return;
+ }
+
+ bgx = ((u_int32_t*)p->dispsw_data)[attr_bgcol_ec(p, conp)];
+ fbcon_XGI_clear(conp, p, srcy, srcx, height, width, bgx);
+}
+
+void fbcon_XGI_revc(struct display *p, int srcx, int srcy)
+{
+ CRITFLAGS
+
+ if(!xgi_video_info.accel) {
+ switch(xgi_video_info.video_bpp) {
+ case 16:
+#ifdef FBCON_HAS_CFB16
+ fbcon_cfb16_revc(p, srcx, srcy);
+#endif
+ break;
+ case 32:
+#ifdef FBCON_HAS_CFB32
+ fbcon_cfb32_revc(p, srcx, srcy);
+#endif
+ break;
+ }
+ return;
+ }
+
+ srcx *= fontwidth(p);
+ srcy *= fontheight(p);
+
+
+ CRITBEGIN
+ XGI310SetupForSolidFill(0, 0x0a, 0);
+ XGI310SubsequentSolidFillRect(srcx, srcy, fontwidth(p), fontheight(p));
+ CRITEND
+ XGI310Sync();
+
+}
+
+#ifdef FBCON_HAS_CFB8
+struct display_switch fbcon_XGI8 = {
+ setup: fbcon_cfb8_setup,
+ bmove: fbcon_XGI_bmove,
+ clear: fbcon_XGI_clear8,
+ putc: fbcon_cfb8_putc,
+ putcs: fbcon_cfb8_putcs,
+ revc: fbcon_cfb8_revc,
+ clear_margins: fbcon_cfb8_clear_margins,
+ fontwidthmask: FONTWIDTH(4)|FONTWIDTH(8)|FONTWIDTH(12)|FONTWIDTH(16)
+};
+#endif
+#ifdef FBCON_HAS_CFB16
+struct display_switch fbcon_XGI16 = {
+ setup: fbcon_cfb16_setup,
+ bmove: fbcon_XGI_bmove,
+ clear: fbcon_XGI_clear16,
+ putc: fbcon_cfb16_putc,
+ putcs: fbcon_cfb16_putcs,
+ revc: fbcon_XGI_revc,
+ clear_margins: fbcon_cfb16_clear_margins,
+ fontwidthmask: FONTWIDTH(4)|FONTWIDTH(8)|FONTWIDTH(12)|FONTWIDTH(16)
+};
+#endif
+#ifdef FBCON_HAS_CFB32
+struct display_switch fbcon_XGI32 = {
+ setup: fbcon_cfb32_setup,
+ bmove: fbcon_XGI_bmove,
+ clear: fbcon_XGI_clear32,
+ putc: fbcon_cfb32_putc,
+ putcs: fbcon_cfb32_putcs,
+ revc: fbcon_XGI_revc,
+ clear_margins: fbcon_cfb32_clear_margins,
+ fontwidthmask: FONTWIDTH(4)|FONTWIDTH(8)|FONTWIDTH(12)|FONTWIDTH(16)
+};
+#endif
+
+#endif /* KERNEL VERSION */
+
+
diff --git a/drivers/staging/xgifb/XGI_accel.h b/drivers/staging/xgifb/XGI_accel.h
new file mode 100644
index 0000000..04e1267
--- /dev/null
+++ b/drivers/staging/xgifb/XGI_accel.h
@@ -0,0 +1,511 @@
+/*
+ * XGI 300/630/730/540/315/550/650/740 frame buffer driver
+ * for Linux kernels 2.4.x and 2.5.x
+ *
+ * 2D acceleration part
+ *
+ * Based on the X driver's XGI300_accel.h which is
+ * Copyright Xavier Ducoin <x.ducoin@lectra.com>
+ * Copyright 2002 by Thomas Winischhofer, Vienna, Austria
+ * and XGI310_accel.h which is
+ * Copyright 2002 by Thomas Winischhofer, Vienna, Austria
+ *
+ * Author: Thomas Winischhofer <thomas@winischhofer.net>:
+ * (see http://www.winischhofer.net/
+ * for more information and updates)
+ */
+
+#ifndef _XGIFB_ACCEL_H
+#define _XGIFB_ACCEL_H
+
+/* Guard accelerator accesses with spin_lock_irqsave? Works well without. */
+#undef XGIFB_USE_SPINLOCKS
+
+#ifdef XGIFB_USE_SPINLOCKS
+#include <linux/spinlock.h>
+#define CRITBEGIN spin_lock_irqsave(&xgi_video_info.lockaccel), critflags);
+#define CRITEND spin_unlock_irqrestore(&xgi_video_info.lockaccel), critflags);
+#define CRITFLAGS unsigned long critflags;
+#else
+#define CRITBEGIN
+#define CRITEND
+#define CRITFLAGS
+#endif
+
+/* Definitions for the XGI engine communication. */
+
+#define PATREGSIZE 384 /* Pattern register size. 384 bytes @ 0x8300 */
+#define BR(x) (0x8200 | (x) << 2)
+#define PBR(x) (0x8300 | (x) << 2)
+
+/* XGI300 engine commands */
+#define BITBLT 0x00000000 /* Blit */
+#define COLOREXP 0x00000001 /* Color expand */
+#define ENCOLOREXP 0x00000002 /* Enhanced color expand */
+#define MULTIPLE_SCANLINE 0x00000003 /* ? */
+#define LINE 0x00000004 /* Draw line */
+#define TRAPAZOID_FILL 0x00000005 /* Fill trapezoid */
+#define TRANSPARENT_BITBLT 0x00000006 /* Transparent Blit */
+
+/* Additional engine commands for 310/325 */
+#define ALPHA_BLEND 0x00000007 /* Alpha blend ? */
+#define A3D_FUNCTION 0x00000008 /* 3D command ? */
+#define CLEAR_Z_BUFFER 0x00000009 /* ? */
+#define GRADIENT_FILL 0x0000000A /* Gradient fill */
+#define STRETCH_BITBLT 0x0000000B /* Stretched Blit */
+
+/* source select */
+#define SRCVIDEO 0x00000000 /* source is video RAM */
+#define SRCSYSTEM 0x00000010 /* source is system memory */
+#define SRCCPUBLITBUF SRCSYSTEM /* source is CPU-driven BitBuffer (for color expand) */
+#define SRCAGP 0x00000020 /* source is AGP memory (?) */
+
+/* Pattern flags */
+#define PATFG 0x00000000 /* foreground color */
+#define PATPATREG 0x00000040 /* pattern in pattern buffer (0x8300) */
+#define PATMONO 0x00000080 /* mono pattern */
+
+/* blitting direction (300 series only) */
+#define X_INC 0x00010000
+#define X_DEC 0x00000000
+#define Y_INC 0x00020000
+#define Y_DEC 0x00000000
+
+/* Clipping flags */
+#define NOCLIP 0x00000000
+#define NOMERGECLIP 0x04000000
+#define CLIPENABLE 0x00040000
+#define CLIPWITHOUTMERGE 0x04040000
+
+/* Transparency */
+#define OPAQUE 0x00000000
+#define TRANSPARENT 0x00100000
+
+/* ? */
+#define DSTAGP 0x02000000
+#define DSTVIDEO 0x02000000
+
+/* Line */
+#define LINE_STYLE 0x00800000
+#define NO_RESET_COUNTER 0x00400000
+#define NO_LAST_PIXEL 0x00200000
+
+/* Subfunctions for Color/Enhanced Color Expansion (310/325 only) */
+#define COLOR_TO_MONO 0x00100000
+#define AA_TEXT 0x00200000
+
+/* Some general registers for 310/325 series */
+#define SRC_ADDR 0x8200
+#define SRC_PITCH 0x8204
+#define AGP_BASE 0x8206 /* color-depth dependent value */
+#define SRC_Y 0x8208
+#define SRC_X 0x820A
+#define DST_Y 0x820C
+#define DST_X 0x820E
+#define DST_ADDR 0x8210
+#define DST_PITCH 0x8214
+#define DST_HEIGHT 0x8216
+#define RECT_WIDTH 0x8218
+#define RECT_HEIGHT 0x821A
+#define PAT_FGCOLOR 0x821C
+#define PAT_BGCOLOR 0x8220
+#define SRC_FGCOLOR 0x8224
+#define SRC_BGCOLOR 0x8228
+#define MONO_MASK 0x822C
+#define LEFT_CLIP 0x8234
+#define TOP_CLIP 0x8236
+#define RIGHT_CLIP 0x8238
+#define BOTTOM_CLIP 0x823A
+#define COMMAND_READY 0x823C
+#define FIRE_TRIGGER 0x8240
+
+#define PATTERN_REG 0x8300 /* 384 bytes pattern buffer */
+
+/* Line registers */
+#define LINE_X0 SRC_Y
+#define LINE_X1 DST_Y
+#define LINE_Y0 SRC_X
+#define LINE_Y1 DST_X
+#define LINE_COUNT RECT_WIDTH
+#define LINE_STYLE_PERIOD RECT_HEIGHT
+#define LINE_STYLE_0 MONO_MASK
+#define LINE_STYLE_1 0x8230
+#define LINE_XN PATTERN_REG
+#define LINE_YN PATTERN_REG+2
+
+/* Transparent bitblit registers */
+#define TRANS_DST_KEY_HIGH PAT_FGCOLOR
+#define TRANS_DST_KEY_LOW PAT_BGCOLOR
+#define TRANS_SRC_KEY_HIGH SRC_FGCOLOR
+#define TRANS_SRC_KEY_LOW SRC_BGCOLOR
+
+/* Queue */
+#define Q_BASE_ADDR 0x85C0 /* Base address of software queue (?) */
+#define Q_WRITE_PTR 0x85C4 /* Current write pointer (?) */
+#define Q_READ_PTR 0x85C8 /* Current read pointer (?) */
+#define Q_STATUS 0x85CC /* queue status */
+
+
+#define MMIO_IN8(base, offset) \
+ *(volatile u8 *)(((u8*)(base)) + (offset))
+#define MMIO_IN16(base, offset) \
+ *(volatile u16 *)(void *)(((u8*)(base)) + (offset))
+#define MMIO_IN32(base, offset) \
+ *(volatile u32 *)(void *)(((u8*)(base)) + (offset))
+#define MMIO_OUT8(base, offset, val) \
+ *(volatile u8 *)(((u8*)(base)) + (offset)) = (val)
+#define MMIO_OUT16(base, offset, val) \
+ *(volatile u16 *)(void *)(((u8*)(base)) + (offset)) = (val)
+#define MMIO_OUT32(base, offset, val) \
+ *(volatile u32 *)(void *)(((u8*)(base)) + (offset)) = (val)
+
+
+
+/* ------------- XGI 300 series -------------- */
+
+/* Macros to do useful things with the XGI BitBLT engine */
+
+/* BR(16) (0x8420):
+
+ bit 31 2D engine: 1 is idle,
+ bit 30 3D engine: 1 is idle,
+ bit 29 Command queue: 1 is empty
+
+ bits 28:24: Current CPU driven BitBlt buffer stage bit[4:0]
+
+ bits 15:0: Current command queue length
+
+*/
+
+/* TW: BR(16)+2 = 0x8242 */
+
+int xgiCmdQueLen;
+
+#define XGI300Idle \
+ { \
+ while( (MMIO_IN16(xgi_video_info.mmio_vbase, BR(16)+2) & 0xE000) != 0xE000){}; \
+ while( (MMIO_IN16(xgi_video_info.mmio_vbase, BR(16)+2) & 0xE000) != 0xE000){}; \
+ while( (MMIO_IN16(xgi_video_info.mmio_vbase, BR(16)+2) & 0xE000) != 0xE000){}; \
+ xgiCmdQueLen=MMIO_IN16(xgi_video_info.mmio_vbase, 0x8240); \
+ }
+/* TW: (do three times, because 2D engine seems quite unsure about whether or not it's idle) */
+
+#define XGI300SetupSRCBase(base) \
+ if (xgiCmdQueLen <= 0) XGI300Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, BR(0), base);\
+ xgiCmdQueLen --;
+
+#define XGI300SetupSRCPitch(pitch) \
+ if (xgiCmdQueLen <= 0) XGI300Idle;\
+ MMIO_OUT16(xgi_video_info.mmio_vbase, BR(1), pitch);\
+ xgiCmdQueLen --;
+
+#define XGI300SetupSRCXY(x,y) \
+ if (xgiCmdQueLen <= 0) XGI300Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, BR(2), (x)<<16 | (y) );\
+ xgiCmdQueLen --;
+
+#define XGI300SetupDSTBase(base) \
+ if (xgiCmdQueLen <= 0) XGI300Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, BR(4), base);\
+ xgiCmdQueLen --;
+
+#define XGI300SetupDSTXY(x,y) \
+ if (xgiCmdQueLen <= 0) XGI300Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, BR(3), (x)<<16 | (y) );\
+ xgiCmdQueLen --;
+
+#define XGI300SetupDSTRect(x,y) \
+ if (xgiCmdQueLen <= 0) XGI300Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, BR(5), (y)<<16 | (x) );\
+ xgiCmdQueLen --;
+
+#define XGI300SetupDSTColorDepth(bpp) \
+ if (xgiCmdQueLen <= 0) XGI300Idle;\
+ MMIO_OUT16(xgi_video_info.mmio_vbase, BR(1)+2, bpp);\
+ xgiCmdQueLen --;
+
+#define XGI300SetupRect(w,h) \
+ if (xgiCmdQueLen <= 0) XGI300Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, BR(6), (h)<<16 | (w) );\
+ xgiCmdQueLen --;
+
+#define XGI300SetupPATFG(color) \
+ if (xgiCmdQueLen <= 0) XGI300Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, BR(7), color);\
+ xgiCmdQueLen --;
+
+#define XGI300SetupPATBG(color) \
+ if (xgiCmdQueLen <= 0) XGI300Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, BR(8), color);\
+ xgiCmdQueLen --;
+
+#define XGI300SetupSRCFG(color) \
+ if (xgiCmdQueLen <= 0) XGI300Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, BR(9), color);\
+ xgiCmdQueLen --;
+
+#define XGI300SetupSRCBG(color) \
+ if (xgiCmdQueLen <= 0) XGI300Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, BR(10), color);\
+ xgiCmdQueLen --;
+
+/* 0x8224 src colorkey high */
+/* 0x8228 src colorkey low */
+/* 0x821c dest colorkey high */
+/* 0x8220 dest colorkey low */
+#define XGI300SetupSRCTrans(color) \
+ if (xgiCmdQueLen <= 1) XGI300Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, 0x8224, color);\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, 0x8228, color);\
+ xgiCmdQueLen -= 2;
+
+#define XGI300SetupDSTTrans(color) \
+ if (xgiCmdQueLen <= 1) XGI300Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, 0x821C, color); \
+ MMIO_OUT32(xgi_video_info.mmio_vbase, 0x8220, color); \
+ xgiCmdQueLen -= 2;
+
+#define XGI300SetupMONOPAT(p0,p1) \
+ if (xgiCmdQueLen <= 1) XGI300Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, BR(11), p0);\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, BR(12), p1);\
+ xgiCmdQueLen -= 2;
+
+#define XGI300SetupClipLT(left,top) \
+ if (xgiCmdQueLen <= 0) XGI300Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, BR(13), ((left) & 0xFFFF) | (top)<<16 );\
+ xgiCmdQueLen--;
+
+#define XGI300SetupClipRB(right,bottom) \
+ if (xgiCmdQueLen <= 0) XGI300Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, BR(14), ((right) & 0xFFFF) | (bottom)<<16 );\
+ xgiCmdQueLen--;
+
+/* General */
+#define XGI300SetupROP(rop) \
+ xgi_video_info.CommandReg = (rop) << 8;
+
+#define XGI300SetupCMDFlag(flags) \
+ xgi_video_info.CommandReg |= (flags);
+
+#define XGI300DoCMD \
+ if (xgiCmdQueLen <= 1) XGI300Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, BR(15), xgi_video_info.CommandReg); \
+ MMIO_OUT32(xgi_video_info.mmio_vbase, BR(16), 0);\
+ xgiCmdQueLen -= 2;
+
+/* Line */
+#define XGI300SetupX0Y0(x,y) \
+ if (xgiCmdQueLen <= 0) XGI300Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, BR(2), (y)<<16 | (x) );\
+ xgiCmdQueLen--;
+
+#define XGI300SetupX1Y1(x,y) \
+ if (xgiCmdQueLen <= 0) XGI300Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, BR(3), (y)<<16 | (x) );\
+ xgiCmdQueLen--;
+
+#define XGI300SetupLineCount(c) \
+ if (xgiCmdQueLen <= 0) XGI300Idle;\
+ MMIO_OUT16(xgi_video_info.mmio_vbase, BR(6), c);\
+ xgiCmdQueLen--;
+
+#define XGI300SetupStylePeriod(p) \
+ if (xgiCmdQueLen <= 0) XGI300Idle;\
+ MMIO_OUT16(xgi_video_info.mmio_vbase, BR(6)+2, p);\
+ xgiCmdQueLen--;
+
+#define XGI300SetupStyleLow(ls) \
+ if (xgiCmdQueLen <= 0) XGI300Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, BR(11), ls);\
+ xgiCmdQueLen--;
+
+#define XGI300SetupStyleHigh(ls) \
+ if (xgiCmdQueLen <= 0) XGI300Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, BR(12), ls);\
+ xgiCmdQueLen--;
+
+
+
+/* ----------- XGI 310/325 series --------------- */
+
+/* Q_STATUS:
+ bit 31 = 1: All engines idle and all queues empty
+ bit 30 = 1: Hardware Queue (=HW CQ, 2D queue, 3D queue) empty
+ bit 29 = 1: 2D engine is idle
+ bit 28 = 1: 3D engine is idle
+ bit 27 = 1: HW command queue empty
+ bit 26 = 1: 2D queue empty
+ bit 25 = 1: 3D queue empty
+ bit 24 = 1: SW command queue empty
+ bits 23:16: 2D counter 3
+ bits 15:8: 2D counter 2
+ bits 7:0: 2D counter 1
+
+ Where is the command queue length (current amount of commands the queue
+ can accept) on the 310/325 series? (The current implementation is taken
+ from 300 series and certainly wrong...)
+*/
+
+/* TW: FIXME: xgiCmdQueLen is... where....? */
+#define XGI310Idle \
+ { \
+ while( (MMIO_IN16(xgi_video_info.mmio_vbase, Q_STATUS+2) & 0x8000) != 0x8000){}; \
+ while( (MMIO_IN16(xgi_video_info.mmio_vbase, Q_STATUS+2) & 0x8000) != 0x8000){}; \
+ xgiCmdQueLen=MMIO_IN16(xgi_video_info.mmio_vbase, Q_STATUS); \
+ }
+
+#define XGI310SetupSRCBase(base) \
+ if (xgiCmdQueLen <= 0) XGI310Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, SRC_ADDR, base);\
+ xgiCmdQueLen--;
+
+#define XGI310SetupSRCPitch(pitch) \
+ if (xgiCmdQueLen <= 0) XGI310Idle;\
+ MMIO_OUT16(xgi_video_info.mmio_vbase, SRC_PITCH, pitch);\
+ xgiCmdQueLen--;
+
+#define XGI310SetupSRCXY(x,y) \
+ if (xgiCmdQueLen <= 0) XGI310Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, SRC_Y, (x)<<16 | (y) );\
+ xgiCmdQueLen--;
+
+#define XGI310SetupDSTBase(base) \
+ if (xgiCmdQueLen <= 0) XGI310Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, DST_ADDR, base);\
+ xgiCmdQueLen--;
+
+#define XGI310SetupDSTXY(x,y) \
+ if (xgiCmdQueLen <= 0) XGI310Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, DST_Y, (x)<<16 | (y) );\
+ xgiCmdQueLen--;
+
+#define XGI310SetupDSTRect(x,y) \
+ if (xgiCmdQueLen <= 0) XGI310Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, DST_PITCH, (y)<<16 | (x) );\
+ xgiCmdQueLen--;
+
+#define XGI310SetupDSTColorDepth(bpp) \
+ if (xgiCmdQueLen <= 0) XGI310Idle;\
+ MMIO_OUT16(xgi_video_info.mmio_vbase, AGP_BASE, bpp);\
+ xgiCmdQueLen--;
+
+#define XGI310SetupRect(w,h) \
+ if (xgiCmdQueLen <= 0) XGI310Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, RECT_WIDTH, (h)<<16 | (w) );\
+ xgiCmdQueLen--;
+
+#define XGI310SetupPATFG(color) \
+ if (xgiCmdQueLen <= 0) XGI310Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, PAT_FGCOLOR, color);\
+ xgiCmdQueLen--;
+
+#define XGI310SetupPATBG(color) \
+ if (xgiCmdQueLen <= 0) XGI310Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, PAT_BGCOLOR, color);\
+ xgiCmdQueLen--;
+
+#define XGI310SetupSRCFG(color) \
+ if (xgiCmdQueLen <= 0) XGI310Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, SRC_FGCOLOR, color);\
+ xgiCmdQueLen--;
+
+#define XGI310SetupSRCBG(color) \
+ if (xgiCmdQueLen <= 0) XGI310Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, SRC_BGCOLOR, color);\
+ xgiCmdQueLen--;
+
+#define XGI310SetupSRCTrans(color) \
+ if (xgiCmdQueLen <= 1) XGI310Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, TRANS_SRC_KEY_HIGH, color);\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, TRANS_SRC_KEY_LOW, color);\
+ xgiCmdQueLen -= 2;
+
+#define XGI310SetupDSTTrans(color) \
+ if (xgiCmdQueLen <= 1) XGI310Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, TRANS_DST_KEY_HIGH, color); \
+ MMIO_OUT32(xgi_video_info.mmio_vbase, TRANS_DST_KEY_LOW, color); \
+ xgiCmdQueLen -= 2;
+
+#define XGI310SetupMONOPAT(p0,p1) \
+ if (xgiCmdQueLen <= 1) XGI310Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, MONO_MASK, p0);\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, MONO_MASK+4, p1);\
+ xgiCmdQueLen -= 2;
+
+#define XGI310SetupClipLT(left,top) \
+ if (xgiCmdQueLen <= 0) XGI310Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, LEFT_CLIP, ((left) & 0xFFFF) | (top)<<16 );\
+ xgiCmdQueLen--;
+
+#define XGI310SetupClipRB(right,bottom) \
+ if (xgiCmdQueLen <= 0) XGI310Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, RIGHT_CLIP, ((right) & 0xFFFF) | (bottom)<<16 );\
+ xgiCmdQueLen--;
+
+#define XGI310SetupROP(rop) \
+ xgi_video_info.CommandReg = (rop) << 8;
+
+#define XGI310SetupCMDFlag(flags) \
+ xgi_video_info.CommandReg |= (flags);
+
+#define XGI310DoCMD \
+ if (xgiCmdQueLen <= 1) XGI310Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, COMMAND_READY, xgi_video_info.CommandReg); \
+ MMIO_OUT32(xgi_video_info.mmio_vbase, FIRE_TRIGGER, 0); \
+ xgiCmdQueLen -= 2;
+
+#define XGI310SetupX0Y0(x,y) \
+ if (xgiCmdQueLen <= 0) XGI310Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, LINE_X0, (y)<<16 | (x) );\
+ xgiCmdQueLen--;
+
+#define XGI310SetupX1Y1(x,y) \
+ if (xgiCmdQueLen <= 0) XGI310Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, LINE_X1, (y)<<16 | (x) );\
+ xgiCmdQueLen--;
+
+#define XGI310SetupLineCount(c) \
+ if (xgiCmdQueLen <= 0) XGI310Idle;\
+ MMIO_OUT16(xgi_video_info.mmio_vbase, LINE_COUNT, c);\
+ xgiCmdQueLen--;
+
+#define XGI310SetupStylePeriod(p) \
+ if (xgiCmdQueLen <= 0) XGI310Idle;\
+ MMIO_OUT16(xgi_video_info.mmio_vbase, LINE_STYLE_PERIOD, p);\
+ xgiCmdQueLen--;
+
+#define XGI310SetupStyleLow(ls) \
+ if (xgiCmdQueLen <= 0) XGI310Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, LINE_STYLE_0, ls);\
+ xgiCmdQueLen--;
+
+#define XGI310SetupStyleHigh(ls) \
+ if (xgiCmdQueLen <= 0) XGI310Idle;\
+ MMIO_OUT32(xgi_video_info.mmio_vbase, LINE_STYLE_1, ls);\
+ xgiCmdQueLen--;
+
+int XGIfb_initaccel(void);
+void XGIfb_syncaccel(void);
+
+extern struct video_info xgi_video_info;
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,33)
+void fbcon_XGI_bmove(struct display *p, int srcy, int srcx, int dsty,
+ int dstx, int height, int width);
+void fbcon_XGI_revc(struct display *p, int srcy, int srcx);
+void fbcon_XGI_clear8(struct vc_data *conp, struct display *p, int srcy,
+ int srcx, int height, int width);
+void fbcon_XGI_clear16(struct vc_data *conp, struct display *p, int srcy,
+ int srcx, int height, int width);
+void fbcon_XGI_clear32(struct vc_data *conp, struct display *p, int srcy,
+ int srcx, int height, int width);
+#endif
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,34)
+extern int XGIfb_accel;
+void fbcon_XGI_fillrect(struct fb_info *info, const struct fb_fillrect *rect);
+void fbcon_XGI_copyarea(struct fb_info *info, const struct fb_copyarea *area);
+#endif
+
+#endif
diff --git a/drivers/staging/xgifb/XGI_main.h b/drivers/staging/xgifb/XGI_main.h
new file mode 100644
index 0000000..4f4171e
--- /dev/null
+++ b/drivers/staging/xgifb/XGI_main.h
@@ -0,0 +1,1023 @@
+#ifndef _XGIFB_MAIN
+#define _XGIFB_MAIN
+
+
+/* ------------------- Constant Definitions ------------------------- */
+
+
+#include "XGIfb.h"
+#include "vb_struct.h"
+#include "vb_def.h"
+
+//#define LINUXBIOS /* turn this on when compiling for LINUXBIOS */
+#define AGPOFF /* default is turn off AGP */
+
+#define XGIFAIL(x) do { printk(x "\n"); return -EINVAL; } while(0)
+
+#define VER_MAJOR 0
+#define VER_MINOR 8
+#define VER_LEVEL 1
+
+#define DRIVER_DESC "XGI Volari Frame Buffer Module Version 0.8.1"
+
+#ifndef PCI_VENDOR_ID_XG
+#define PCI_VENDOR_ID_XG 0x18CA
+#endif
+
+#ifndef PCI_DEVICE_ID_XG_40
+#define PCI_DEVICE_ID_XG_40 0x040
+#endif
+#ifndef PCI_DEVICE_ID_XG_41
+#define PCI_DEVICE_ID_XG_41 0x041
+#endif
+#ifndef PCI_DEVICE_ID_XG_42
+#define PCI_DEVICE_ID_XG_42 0x042
+#endif
+#ifndef PCI_DEVICE_ID_XG_20
+#define PCI_DEVICE_ID_XG_20 0x020
+#endif
+#ifndef PCI_DEVICE_ID_XG_27
+#define PCI_DEVICE_ID_XG_27 0x027
+#endif
+
+
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,8)
+#define XGI_IOTYPE1 void __iomem
+#define XGI_IOTYPE2 __iomem
+#define XGIINITSTATIC static
+#else
+#define XGI_IOTYPE1 unsigned char
+#define XGI_IOTYPE2
+#define XGIINITSTATIC
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+static struct pci_device_id __devinitdata xgifb_pci_table[] = {
+
+ { PCI_VENDOR_ID_XG, PCI_DEVICE_ID_XG_20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_XG, PCI_DEVICE_ID_XG_27, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+ { PCI_VENDOR_ID_XG, PCI_DEVICE_ID_XG_40, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
+ { PCI_VENDOR_ID_XG, PCI_DEVICE_ID_XG_42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, xgifb_pci_table);
+#endif
+/* To be included in fb.h */
+#ifndef FB_ACCEL_XGI_GLAMOUR_2
+#define FB_ACCEL_XGI_GLAMOUR_2 40 /* XGI 315, 650, 740 */
+#endif
+#ifndef FB_ACCEL_XGI_XABRE
+#define FB_ACCEL_XGI_XABRE 41 /* XGI 330 ("Xabre") */
+#endif
+
+#define MAX_ROM_SCAN 0x10000
+
+#define HW_CURSOR_CAP 0x80
+#define TURBO_QUEUE_CAP 0x40
+#define AGP_CMD_QUEUE_CAP 0x20
+#define VM_CMD_QUEUE_CAP 0x10
+#define MMIO_CMD_QUEUE_CAP 0x08
+
+
+
+/* For 315 series */
+
+#define COMMAND_QUEUE_AREA_SIZE 0x80000 /* 512K */
+#define COMMAND_QUEUE_THRESHOLD 0x1F
+
+
+/* TW */
+#define HW_CURSOR_AREA_SIZE_315 0x4000 /* 16K */
+#define HW_CURSOR_AREA_SIZE_300 0x1000 /* 4K */
+
+#define OH_ALLOC_SIZE 4000
+#define SENTINEL 0x7fffffff
+
+#define SEQ_ADR 0x14
+#define SEQ_DATA 0x15
+#define DAC_ADR 0x18
+#define DAC_DATA 0x19
+#define CRTC_ADR 0x24
+#define CRTC_DATA 0x25
+#define DAC2_ADR (0x16-0x30)
+#define DAC2_DATA (0x17-0x30)
+#define VB_PART1_ADR (0x04-0x30)
+#define VB_PART1_DATA (0x05-0x30)
+#define VB_PART2_ADR (0x10-0x30)
+#define VB_PART2_DATA (0x11-0x30)
+#define VB_PART3_ADR (0x12-0x30)
+#define VB_PART3_DATA (0x13-0x30)
+#define VB_PART4_ADR (0x14-0x30)
+#define VB_PART4_DATA (0x15-0x30)
+
+#define XGISR XGI_Pr.P3c4
+#define XGICR XGI_Pr.P3d4
+#define XGIDACA XGI_Pr.P3c8
+#define XGIDACD XGI_Pr.P3c9
+#define XGIPART1 XGI_Pr.Part1Port
+#define XGIPART2 XGI_Pr.Part2Port
+#define XGIPART3 XGI_Pr.Part3Port
+#define XGIPART4 XGI_Pr.Part4Port
+#define XGIPART5 XGI_Pr.Part5Port
+#define XGIDAC2A XGIPART5
+#define XGIDAC2D (XGIPART5 + 1)
+#define XGIMISCR (XGI_Pr.RelIO + 0x1c)
+#define XGIINPSTAT (XGI_Pr.RelIO + 0x2a)
+
+#define IND_XGI_PASSWORD 0x05 /* SRs */
+#define IND_XGI_COLOR_MODE 0x06
+#define IND_XGI_RAMDAC_CONTROL 0x07
+#define IND_XGI_DRAM_SIZE 0x14
+#define IND_XGI_SCRATCH_REG_16 0x16
+#define IND_XGI_SCRATCH_REG_17 0x17
+#define IND_XGI_SCRATCH_REG_1A 0x1A
+#define IND_XGI_MODULE_ENABLE 0x1E
+#define IND_XGI_PCI_ADDRESS_SET 0x20
+#define IND_XGI_TURBOQUEUE_ADR 0x26
+#define IND_XGI_TURBOQUEUE_SET 0x27
+#define IND_XGI_POWER_ON_TRAP 0x38
+#define IND_XGI_POWER_ON_TRAP2 0x39
+#define IND_XGI_CMDQUEUE_SET 0x26
+#define IND_XGI_CMDQUEUE_THRESHOLD 0x27
+
+#define IND_XGI_SCRATCH_REG_CR30 0x30 /* CRs */
+#define IND_XGI_SCRATCH_REG_CR31 0x31
+#define IND_XGI_SCRATCH_REG_CR32 0x32
+#define IND_XGI_SCRATCH_REG_CR33 0x33
+#define IND_XGI_LCD_PANEL 0x36
+#define IND_XGI_SCRATCH_REG_CR37 0x37
+#define IND_XGI_AGP_IO_PAD 0x48
+
+#define IND_BRI_DRAM_STATUS 0x63 /* PCI config memory size offset */
+
+#define MMIO_QUEUE_PHYBASE 0x85C0
+#define MMIO_QUEUE_WRITEPORT 0x85C4
+#define MMIO_QUEUE_READPORT 0x85C8
+
+#define IND_XGI_CRT2_WRITE_ENABLE_300 0x24
+#define IND_XGI_CRT2_WRITE_ENABLE_315 0x2F
+
+#define XGI_PASSWORD 0x86 /* SR05 */
+#define XGI_INTERLACED_MODE 0x20 /* SR06 */
+#define XGI_8BPP_COLOR_MODE 0x0
+#define XGI_15BPP_COLOR_MODE 0x1
+#define XGI_16BPP_COLOR_MODE 0x2
+#define XGI_32BPP_COLOR_MODE 0x4
+
+#define XGI_DRAM_SIZE_MASK 0xF0 /*SR14 */
+#define XGI_DRAM_SIZE_1MB 0x00
+#define XGI_DRAM_SIZE_2MB 0x01
+#define XGI_DRAM_SIZE_4MB 0x02
+#define XGI_DRAM_SIZE_8MB 0x03
+#define XGI_DRAM_SIZE_16MB 0x04
+#define XGI_DRAM_SIZE_32MB 0x05
+#define XGI_DRAM_SIZE_64MB 0x06
+#define XGI_DRAM_SIZE_128MB 0x07
+#define XGI_DRAM_SIZE_256MB 0x08
+#define XGI_DATA_BUS_MASK 0x02
+#define XGI_DATA_BUS_64 0x00
+#define XGI_DATA_BUS_128 0x01
+#define XGI_DUAL_CHANNEL_MASK 0x0C
+#define XGI_SINGLE_CHANNEL_1_RANK 0x0
+#define XGI_SINGLE_CHANNEL_2_RANK 0x1
+#define XGI_ASYM_DDR 0x02
+#define XGI_DUAL_CHANNEL_1_RANK 0x3
+
+#define XGI550_DRAM_SIZE_MASK 0x3F /* 550/650/740 SR14 */
+#define XGI550_DRAM_SIZE_4MB 0x00
+#define XGI550_DRAM_SIZE_8MB 0x01
+#define XGI550_DRAM_SIZE_16MB 0x03
+#define XGI550_DRAM_SIZE_24MB 0x05
+#define XGI550_DRAM_SIZE_32MB 0x07
+#define XGI550_DRAM_SIZE_64MB 0x0F
+#define XGI550_DRAM_SIZE_96MB 0x17
+#define XGI550_DRAM_SIZE_128MB 0x1F
+#define XGI550_DRAM_SIZE_256MB 0x3F
+
+#define XGI_SCRATCH_REG_1A_MASK 0x10
+
+#define XGI_ENABLE_2D 0x40 /* SR1E */
+
+#define XGI_MEM_MAP_IO_ENABLE 0x01 /* SR20 */
+#define XGI_PCI_ADDR_ENABLE 0x80
+
+#define XGI_AGP_CMDQUEUE_ENABLE 0x80 /* 315/650/740 SR26 */
+#define XGI_VRAM_CMDQUEUE_ENABLE 0x40
+#define XGI_MMIO_CMD_ENABLE 0x20
+#define XGI_CMD_QUEUE_SIZE_512k 0x00
+#define XGI_CMD_QUEUE_SIZE_1M 0x04
+#define XGI_CMD_QUEUE_SIZE_2M 0x08
+#define XGI_CMD_QUEUE_SIZE_4M 0x0C
+#define XGI_CMD_QUEUE_RESET 0x01
+#define XGI_CMD_AUTO_CORR 0x02
+
+#define XGI_SIMULTANEOUS_VIEW_ENABLE 0x01 /* CR30 */
+#define XGI_MODE_SELECT_CRT2 0x02
+#define XGI_VB_OUTPUT_COMPOSITE 0x04
+#define XGI_VB_OUTPUT_SVIDEO 0x08
+#define XGI_VB_OUTPUT_SCART 0x10
+#define XGI_VB_OUTPUT_LCD 0x20
+#define XGI_VB_OUTPUT_CRT2 0x40
+#define XGI_VB_OUTPUT_HIVISION 0x80
+
+#define XGI_VB_OUTPUT_DISABLE 0x20 /* CR31 */
+#define XGI_DRIVER_MODE 0x40
+
+#define XGI_VB_COMPOSITE 0x01 /* CR32 */
+#define XGI_VB_SVIDEO 0x02
+#define XGI_VB_SCART 0x04
+#define XGI_VB_LCD 0x08
+#define XGI_VB_CRT2 0x10
+#define XGI_CRT1 0x20
+#define XGI_VB_HIVISION 0x40
+#define XGI_VB_YPBPR 0x80
+#define XGI_VB_TV (XGI_VB_COMPOSITE | XGI_VB_SVIDEO | \
+ XGI_VB_SCART | XGI_VB_HIVISION|XGI_VB_YPBPR)
+
+#define XGI_EXTERNAL_CHIP_MASK 0x0E /* CR37 */
+#define XGI_EXTERNAL_CHIP_XGI301 0x01 /* in CR37 << 1 ! */
+#define XGI_EXTERNAL_CHIP_LVDS 0x02 /* in CR37 << 1 ! */
+#define XGI_EXTERNAL_CHIP_TRUMPION 0x03 /* in CR37 << 1 ! */
+#define XGI_EXTERNAL_CHIP_LVDS_CHRONTEL 0x04 /* in CR37 << 1 ! */
+#define XGI_EXTERNAL_CHIP_CHRONTEL 0x05 /* in CR37 << 1 ! */
+#define XGI310_EXTERNAL_CHIP_LVDS 0x02 /* in CR37 << 1 ! */
+#define XGI310_EXTERNAL_CHIP_LVDS_CHRONTEL 0x03 /* in CR37 << 1 ! */
+
+#define XGI_AGP_2X 0x20 /* CR48 */
+
+#define BRI_DRAM_SIZE_MASK 0x70 /* PCI bridge config data */
+#define BRI_DRAM_SIZE_2MB 0x00
+#define BRI_DRAM_SIZE_4MB 0x01
+#define BRI_DRAM_SIZE_8MB 0x02
+#define BRI_DRAM_SIZE_16MB 0x03
+#define BRI_DRAM_SIZE_32MB 0x04
+#define BRI_DRAM_SIZE_64MB 0x05
+
+#define HW_DEVICE_EXTENSION XGI_HW_DEVICE_INFO
+#define PHW_DEVICE_EXTENSION PXGI_HW_DEVICE_INFO
+
+#define SR_BUFFER_SIZE 5
+#define CR_BUFFER_SIZE 5
+
+/* Useful macros */
+#define inXGIREG(base) inb(base)
+#define outXGIREG(base,val) outb(val,base)
+#define orXGIREG(base,val) do { \
+ unsigned char __Temp = inb(base); \
+ outXGIREG(base, __Temp | (val)); \
+ } while (0)
+#define andXGIREG(base,val) do { \
+ unsigned char __Temp = inb(base); \
+ outXGIREG(base, __Temp & (val)); \
+ } while (0)
+#define inXGIIDXREG(base,idx,var) do { \
+ outb(idx,base); var=inb((base)+1); \
+ } while (0)
+#define outXGIIDXREG(base,idx,val) do { \
+ outb(idx,base); outb((val),(base)+1); \
+ } while (0)
+#define orXGIIDXREG(base,idx,val) do { \
+ unsigned char __Temp; \
+ outb(idx,base); \
+ __Temp = inb((base)+1)|(val); \
+ outXGIIDXREG(base,idx,__Temp); \
+ } while (0)
+#define andXGIIDXREG(base,idx,and) do { \
+ unsigned char __Temp; \
+ outb(idx,base); \
+ __Temp = inb((base)+1)&(and); \
+ outXGIIDXREG(base,idx,__Temp); \
+ } while (0)
+#define setXGIIDXREG(base,idx,and,or) do { \
+ unsigned char __Temp; \
+ outb(idx,base); \
+ __Temp = (inb((base)+1)&(and))|(or); \
+ outXGIIDXREG(base,idx,__Temp); \
+ } while (0)
+
+/* ------------------- Global Variables ----------------------------- */
+
+/* Fbcon variables */
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+static struct fb_info* fb_info;
+#else
+static struct fb_info XGI_fb_info;
+#endif
+
+
+static int video_type = FB_TYPE_PACKED_PIXELS;
+
+static struct fb_var_screeninfo default_var = {
+ .xres = 0,
+ .yres = 0,
+ .xres_virtual = 0,
+ .yres_virtual = 0,
+ .xoffset = 0,
+ .yoffset = 0,
+ .bits_per_pixel = 0,
+ .grayscale = 0,
+ .red = {0, 8, 0},
+ .green = {0, 8, 0},
+ .blue = {0, 8, 0},
+ .transp = {0, 0, 0},
+ .nonstd = 0,
+ .activate = FB_ACTIVATE_NOW,
+ .height = -1,
+ .width = -1,
+ .accel_flags = 0,
+ .pixclock = 0,
+ .left_margin = 0,
+ .right_margin = 0,
+ .upper_margin = 0,
+ .lower_margin = 0,
+ .hsync_len = 0,
+ .vsync_len = 0,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+ .reserved = {0, 0, 0, 0, 0, 0}
+#endif
+};
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+static struct fb_fix_screeninfo XGIfb_fix = {
+ .id = "XGI",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .xpanstep = 1,
+ .ypanstep = 1,
+};
+static char myid[20];
+static u32 pseudo_palette[17];
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+static struct display XGI_disp;
+
+static struct display_switch XGIfb_sw;
+
+static struct {
+ u16 blue, green, red, pad;
+} XGI_palette[256];
+
+static union {
+#ifdef FBCON_HAS_CFB16
+ u16 cfb16[16];
+#endif
+#ifdef FBCON_HAS_CFB32
+ u32 cfb32[16];
+#endif
+} XGI_fbcon_cmap;
+
+static int XGIfb_inverse = 0;
+#endif
+
+/* display status */
+static int XGIfb_off = 0;
+static int XGIfb_crt1off = 0;
+static int XGIfb_forcecrt1 = -1;
+static int XGIvga_enabled = 0;
+static int XGIfb_userom = 0;
+//static int XGIfb_useoem = -1;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+static int currcon = 0;
+#endif
+
+/* global flags */
+static int XGIfb_registered;
+static int XGIfb_tvmode = 0;
+static int XGIfb_mem = 0;
+static int XGIfb_pdc = 0;
+static int enable_dstn = 0;
+static int XGIfb_ypan = -1;
+
+
+int XGIfb_accel = 0;
+
+
+static int XGIfb_hwcursor_size = 0;
+static int XGIfb_CRT2_write_enable = 0;
+
+int XGIfb_crt2type = -1; /* TW: CRT2 type (for overriding autodetection) */
+int XGIfb_tvplug = -1; /* PR: Tv plug type (for overriding autodetection) */
+
+int XGIfb_queuemode = -1; /* TW: Use MMIO queue mode by default (310/325 series only) */
+
+unsigned char XGIfb_detectedpdc = 0;
+
+unsigned char XGIfb_detectedlcda = 0xff;
+
+
+
+
+/* TW: For ioctl XGIFB_GET_INFO */
+/* XGIfb_info XGIfbinfo; */
+
+/* TW: Hardware extension; contains data on hardware */
+HW_DEVICE_EXTENSION XGIhw_ext;
+
+/* TW: XGI private structure */
+VB_DEVICE_INFO XGI_Pr;
+
+/* card parameters */
+static unsigned long XGIfb_mmio_size = 0;
+static u8 XGIfb_caps = 0;
+
+typedef enum _XGI_CMDTYPE {
+ MMIO_CMD = 0,
+ AGP_CMD_QUEUE,
+ VM_CMD_QUEUE,
+} XGI_CMDTYPE;
+
+#define MD_XGI300 1
+#define MD_XGI315 2
+
+/* mode table */
+/* NOT const - will be patched for 1280x960 mode number chaos reasons */
+struct _XGIbios_mode {
+ char name[15];
+ u8 mode_no;
+ u16 vesa_mode_no_1; /* "XGI defined" VESA mode number */
+ u16 vesa_mode_no_2; /* Real VESA mode numbers */
+ u16 xres;
+ u16 yres;
+ u16 bpp;
+ u16 rate_idx;
+ u16 cols;
+ u16 rows;
+ u8 chipset;
+} XGIbios_mode[] = {
+#define MODE_INDEX_NONE 0 /* TW: index for mode=none */
+ {"none", 0xFF, 0x0000, 0x0000, 0, 0, 0, 0, 0, 0, MD_XGI300|MD_XGI315}, /* TW: for mode "none" */
+ {"320x240x16", 0x56, 0x0000, 0x0000, 320, 240, 16, 1, 40, 15, MD_XGI315},
+ {"320x480x8", 0x5A, 0x0000, 0x0000, 320, 480, 8, 1, 40, 30, MD_XGI315}, /* TW: FSTN */
+ {"320x480x16", 0x5B, 0x0000, 0x0000, 320, 480, 16, 1, 40, 30, MD_XGI315}, /* TW: FSTN */
+ {"640x480x8", 0x2E, 0x0101, 0x0101, 640, 480, 8, 1, 80, 30, MD_XGI300|MD_XGI315},
+ {"640x480x16", 0x44, 0x0111, 0x0111, 640, 480, 16, 1, 80, 30, MD_XGI300|MD_XGI315},
+ {"640x480x24", 0x62, 0x013a, 0x0112, 640, 480, 32, 1, 80, 30, MD_XGI300|MD_XGI315}, /* TW: That's for people who mix up color- and fb depth */
+ {"640x480x32", 0x62, 0x013a, 0x0112, 640, 480, 32, 1, 80, 30, MD_XGI300|MD_XGI315},
+ {"720x480x8", 0x31, 0x0000, 0x0000, 720, 480, 8, 1, 90, 30, MD_XGI300|MD_XGI315},
+ {"720x480x16", 0x33, 0x0000, 0x0000, 720, 480, 16, 1, 90, 30, MD_XGI300|MD_XGI315},
+ {"720x480x24", 0x35, 0x0000, 0x0000, 720, 480, 32, 1, 90, 30, MD_XGI300|MD_XGI315},
+ {"720x480x32", 0x35, 0x0000, 0x0000, 720, 480, 32, 1, 90, 30, MD_XGI300|MD_XGI315},
+ {"720x576x8", 0x32, 0x0000, 0x0000, 720, 576, 8, 1, 90, 36, MD_XGI300|MD_XGI315},
+ {"720x576x16", 0x34, 0x0000, 0x0000, 720, 576, 16, 1, 90, 36, MD_XGI300|MD_XGI315},
+ {"720x576x24", 0x36, 0x0000, 0x0000, 720, 576, 32, 1, 90, 36, MD_XGI300|MD_XGI315},
+ {"720x576x32", 0x36, 0x0000, 0x0000, 720, 576, 32, 1, 90, 36, MD_XGI300|MD_XGI315},
+ {"800x480x8", 0x70, 0x0000, 0x0000, 800, 480, 8, 1, 100, 30, MD_XGI300|MD_XGI315},
+ {"800x480x16", 0x7a, 0x0000, 0x0000, 800, 480, 16, 1, 100, 30, MD_XGI300|MD_XGI315},
+ {"800x480x24", 0x76, 0x0000, 0x0000, 800, 480, 32, 1, 100, 30, MD_XGI300|MD_XGI315},
+ {"800x480x32", 0x76, 0x0000, 0x0000, 800, 480, 32, 1, 100, 30, MD_XGI300|MD_XGI315},
+#define DEFAULT_MODE 21 /* TW: index for 800x600x8 */
+#define DEFAULT_LCDMODE 21 /* TW: index for 800x600x8 */
+#define DEFAULT_TVMODE 21 /* TW: index for 800x600x8 */
+ {"800x600x8", 0x30, 0x0103, 0x0103, 800, 600, 8, 1, 100, 37, MD_XGI300|MD_XGI315},
+ {"800x600x16", 0x47, 0x0114, 0x0114, 800, 600, 16, 1, 100, 37, MD_XGI300|MD_XGI315},
+ {"800x600x24", 0x63, 0x013b, 0x0115, 800, 600, 32, 1, 100, 37, MD_XGI300|MD_XGI315},
+ {"800x600x32", 0x63, 0x013b, 0x0115, 800, 600, 32, 1, 100, 37, MD_XGI300|MD_XGI315},
+ {"1024x576x8", 0x71, 0x0000, 0x0000, 1024, 576, 8, 1, 128, 36, MD_XGI300|MD_XGI315},
+ {"1024x576x16", 0x74, 0x0000, 0x0000, 1024, 576, 16, 1, 128, 36, MD_XGI300|MD_XGI315},
+ {"1024x576x24", 0x77, 0x0000, 0x0000, 1024, 576, 32, 1, 128, 36, MD_XGI300|MD_XGI315},
+ {"1024x576x32", 0x77, 0x0000, 0x0000, 1024, 576, 32, 1, 128, 36, MD_XGI300|MD_XGI315},
+ {"1024x600x8", 0x20, 0x0000, 0x0000, 1024, 600, 8, 1, 128, 37, MD_XGI300 }, /* TW: 300 series only */
+ {"1024x600x16", 0x21, 0x0000, 0x0000, 1024, 600, 16, 1, 128, 37, MD_XGI300 },
+ {"1024x600x24", 0x22, 0x0000, 0x0000, 1024, 600, 32, 1, 128, 37, MD_XGI300 },
+ {"1024x600x32", 0x22, 0x0000, 0x0000, 1024, 600, 32, 1, 128, 37, MD_XGI300 },
+ {"1024x768x8", 0x38, 0x0105, 0x0105, 1024, 768, 8, 1, 128, 48, MD_XGI300|MD_XGI315},
+ {"1024x768x16", 0x4A, 0x0117, 0x0117, 1024, 768, 16, 1, 128, 48, MD_XGI300|MD_XGI315},
+ {"1024x768x24", 0x64, 0x013c, 0x0118, 1024, 768, 32, 1, 128, 48, MD_XGI300|MD_XGI315},
+ {"1024x768x32", 0x64, 0x013c, 0x0118, 1024, 768, 32, 1, 128, 48, MD_XGI300|MD_XGI315},
+ {"1152x768x8", 0x23, 0x0000, 0x0000, 1152, 768, 8, 1, 144, 48, MD_XGI300 }, /* TW: 300 series only */
+ {"1152x768x16", 0x24, 0x0000, 0x0000, 1152, 768, 16, 1, 144, 48, MD_XGI300 },
+ {"1152x768x24", 0x25, 0x0000, 0x0000, 1152, 768, 32, 1, 144, 48, MD_XGI300 },
+ {"1152x768x32", 0x25, 0x0000, 0x0000, 1152, 768, 32, 1, 144, 48, MD_XGI300 },
+ {"1280x720x8", 0x79, 0x0000, 0x0000, 1280, 720, 8, 1, 160, 45, MD_XGI300|MD_XGI315},
+ {"1280x720x16", 0x75, 0x0000, 0x0000, 1280, 720, 16, 1, 160, 45, MD_XGI300|MD_XGI315},
+ {"1280x720x24", 0x78, 0x0000, 0x0000, 1280, 720, 32, 1, 160, 45, MD_XGI300|MD_XGI315},
+ {"1280x720x32", 0x78, 0x0000, 0x0000, 1280, 720, 32, 1, 160, 45, MD_XGI300|MD_XGI315},
+ {"1280x768x8", 0x23, 0x0000, 0x0000, 1280, 768, 8, 1, 160, 48, MD_XGI315}, /* TW: 310/325 series only */
+ {"1280x768x16", 0x24, 0x0000, 0x0000, 1280, 768, 16, 1, 160, 48, MD_XGI315},
+ {"1280x768x24", 0x25, 0x0000, 0x0000, 1280, 768, 32, 1, 160, 48, MD_XGI315},
+ {"1280x768x32", 0x25, 0x0000, 0x0000, 1280, 768, 32, 1, 160, 48, MD_XGI315},
+#define MODEINDEX_1280x960 48
+ {"1280x960x8", 0x7C, 0x0000, 0x0000, 1280, 960, 8, 1, 160, 60, MD_XGI300|MD_XGI315}, /* TW: Modenumbers being patched */
+ {"1280x960x16", 0x7D, 0x0000, 0x0000, 1280, 960, 16, 1, 160, 60, MD_XGI300|MD_XGI315},
+ {"1280x960x24", 0x7E, 0x0000, 0x0000, 1280, 960, 32, 1, 160, 60, MD_XGI300|MD_XGI315},
+ {"1280x960x32", 0x7E, 0x0000, 0x0000, 1280, 960, 32, 1, 160, 60, MD_XGI300|MD_XGI315},
+ {"1280x1024x8", 0x3A, 0x0107, 0x0107, 1280, 1024, 8, 1, 160, 64, MD_XGI300|MD_XGI315},
+ {"1280x1024x16", 0x4D, 0x011a, 0x011a, 1280, 1024, 16, 1, 160, 64, MD_XGI300|MD_XGI315},
+ {"1280x1024x24", 0x65, 0x013d, 0x011b, 1280, 1024, 32, 1, 160, 64, MD_XGI300|MD_XGI315},
+ {"1280x1024x32", 0x65, 0x013d, 0x011b, 1280, 1024, 32, 1, 160, 64, MD_XGI300|MD_XGI315},
+ {"1400x1050x8", 0x26, 0x0000, 0x0000, 1400, 1050, 8, 1, 175, 65, MD_XGI315}, /* TW: 310/325 series only */
+ {"1400x1050x16", 0x27, 0x0000, 0x0000, 1400, 1050, 16, 1, 175, 65, MD_XGI315},
+ {"1400x1050x24", 0x28, 0x0000, 0x0000, 1400, 1050, 32, 1, 175, 65, MD_XGI315},
+ {"1400x1050x32", 0x28, 0x0000, 0x0000, 1400, 1050, 32, 1, 175, 65, MD_XGI315},
+ {"1600x1200x8", 0x3C, 0x0130, 0x011c, 1600, 1200, 8, 1, 200, 75, MD_XGI300|MD_XGI315},
+ {"1600x1200x16", 0x3D, 0x0131, 0x011e, 1600, 1200, 16, 1, 200, 75, MD_XGI300|MD_XGI315},
+ {"1600x1200x24", 0x66, 0x013e, 0x011f, 1600, 1200, 32, 1, 200, 75, MD_XGI300|MD_XGI315},
+ {"1600x1200x32", 0x66, 0x013e, 0x011f, 1600, 1200, 32, 1, 200, 75, MD_XGI300|MD_XGI315},
+ {"1920x1440x8", 0x68, 0x013f, 0x0000, 1920, 1440, 8, 1, 240, 75, MD_XGI300|MD_XGI315},
+ {"1920x1440x16", 0x69, 0x0140, 0x0000, 1920, 1440, 16, 1, 240, 75, MD_XGI300|MD_XGI315},
+ {"1920x1440x24", 0x6B, 0x0141, 0x0000, 1920, 1440, 32, 1, 240, 75, MD_XGI300|MD_XGI315},
+ {"1920x1440x32", 0x6B, 0x0141, 0x0000, 1920, 1440, 32, 1, 240, 75, MD_XGI300|MD_XGI315},
+ {"2048x1536x8", 0x6c, 0x0000, 0x0000, 2048, 1536, 8, 1, 256, 96, MD_XGI315}, /* TW: 310/325 series only */
+ {"2048x1536x16", 0x6d, 0x0000, 0x0000, 2048, 1536, 16, 1, 256, 96, MD_XGI315},
+ {"2048x1536x24", 0x6e, 0x0000, 0x0000, 2048, 1536, 32, 1, 256, 96, MD_XGI315},
+ {"2048x1536x32", 0x6e, 0x0000, 0x0000, 2048, 1536, 32, 1, 256, 96, MD_XGI315},
+ {"\0", 0x00, 0, 0, 0, 0, 0, 0, 0}
+};
+
+/* mode-related variables */
+#ifdef MODULE
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+static int xgifb_mode_idx = 1;
+#else
+static int XGIfb_mode_idx = MODE_INDEX_NONE; /* Don't use a mode by default if we are a module */
+#endif
+#else
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+static int xgifb_mode_idx = -1; /* Use a default mode if we are inside the kernel */
+#else
+static int XGIfb_mode_idx = -1;
+#endif
+#endif
+u8 XGIfb_mode_no = 0;
+u8 XGIfb_rate_idx = 0;
+
+/* TW: CR36 evaluation */
+const USHORT XGI300paneltype[] =
+ { LCD_UNKNOWN, LCD_800x600, LCD_1024x768, LCD_1280x1024,
+ LCD_1280x960, LCD_640x480, LCD_1024x600, LCD_1152x768,
+ LCD_1024x768, LCD_1024x768, LCD_1024x768,
+ LCD_1024x768, LCD_1024x768, LCD_1024x768, LCD_1024x768 };
+
+const USHORT XGI310paneltype[] =
+ { LCD_UNKNOWN, LCD_800x600, LCD_1024x768, LCD_1280x1024,
+ LCD_640x480, LCD_1024x600, LCD_1152x864, LCD_1280x960,
+ LCD_1152x768, LCD_1400x1050,LCD_1280x768, LCD_1600x1200,
+ LCD_1024x768, LCD_1024x768, LCD_1024x768 };
+
+static const struct _XGI_crt2type {
+ char name[10];
+ int type_no;
+ int tvplug_no;
+} XGI_crt2type[] = {
+ {"NONE", 0, -1},
+ {"LCD", DISPTYPE_LCD, -1},
+ {"TV", DISPTYPE_TV, -1},
+ {"VGA", DISPTYPE_CRT2, -1},
+ {"SVIDEO", DISPTYPE_TV, TVPLUG_SVIDEO},
+ {"COMPOSITE", DISPTYPE_TV, TVPLUG_COMPOSITE},
+ {"SCART", DISPTYPE_TV, TVPLUG_SCART},
+ {"none", 0, -1},
+ {"lcd", DISPTYPE_LCD, -1},
+ {"tv", DISPTYPE_TV, -1},
+ {"vga", DISPTYPE_CRT2, -1},
+ {"svideo", DISPTYPE_TV, TVPLUG_SVIDEO},
+ {"composite", DISPTYPE_TV, TVPLUG_COMPOSITE},
+ {"scart", DISPTYPE_TV, TVPLUG_SCART},
+ {"\0", -1, -1}
+};
+
+/* Queue mode selection for 310 series */
+static const struct _XGI_queuemode {
+ char name[6];
+ int type_no;
+} XGI_queuemode[] = {
+ {"AGP", AGP_CMD_QUEUE},
+ {"VRAM", VM_CMD_QUEUE},
+ {"MMIO", MMIO_CMD},
+ {"agp", AGP_CMD_QUEUE},
+ {"vram", VM_CMD_QUEUE},
+ {"mmio", MMIO_CMD},
+ {"\0", -1}
+};
+
+/* TV standard */
+static const struct _XGI_tvtype {
+ char name[6];
+ int type_no;
+} XGI_tvtype[] = {
+ {"PAL", 1},
+ {"NTSC", 2},
+ {"pal", 1},
+ {"ntsc", 2},
+ {"\0", -1}
+};
+
+static const struct _XGI_vrate {
+ u16 idx;
+ u16 xres;
+ u16 yres;
+ u16 refresh;
+} XGIfb_vrate[] = {
+ {1, 640, 480, 60}, {2, 640, 480, 72}, {3, 640, 480, 75}, {4, 640, 480, 85},
+ {5, 640, 480,100}, {6, 640, 480, 120}, {7, 640, 480, 160}, {8, 640, 480, 200},
+ {1, 720, 480, 60},
+ {1, 720, 576, 58},
+ {1, 800, 480, 60}, {2, 800, 480, 75}, {3, 800, 480, 85},
+ {1, 800, 600, 60}, {2, 800, 600, 72}, {3, 800, 600, 75},
+ {4, 800, 600, 85}, {5, 800, 600, 100}, {6, 800, 600, 120}, {7, 800, 600, 160},
+ {1, 1024, 768, 60}, {2, 1024, 768, 70}, {3, 1024, 768, 75},
+ {4, 1024, 768, 85}, {5, 1024, 768, 100}, {6, 1024, 768, 120},
+ {1, 1024, 576, 60}, {2, 1024, 576, 75}, {3, 1024, 576, 85},
+ {1, 1024, 600, 60},
+ {1, 1152, 768, 60},
+ {1, 1280, 720, 60}, {2, 1280, 720, 75}, {3, 1280, 720, 85},
+ {1, 1280, 768, 60},
+ {1, 1280, 1024, 60}, {2, 1280, 1024, 75}, {3, 1280, 1024, 85},
+ {1, 1280, 960, 70},
+ {1, 1400, 1050, 60},
+ {1, 1600, 1200, 60}, {2, 1600, 1200, 65}, {3, 1600, 1200, 70}, {4, 1600, 1200, 75},
+ {5, 1600, 1200, 85}, {6, 1600, 1200, 100}, {7, 1600, 1200, 120},
+ {1, 1920, 1440, 60}, {2, 1920, 1440, 65}, {3, 1920, 1440, 70}, {4, 1920, 1440, 75},
+ {5, 1920, 1440, 85}, {6, 1920, 1440, 100},
+ {1, 2048, 1536, 60}, {2, 2048, 1536, 65}, {3, 2048, 1536, 70}, {4, 2048, 1536, 75},
+ {5, 2048, 1536, 85},
+ {0, 0, 0, 0}
+};
+
+static const struct _chswtable {
+ int subsysVendor;
+ int subsysCard;
+ char *vendorName;
+ char *cardName;
+} mychswtable[] = {
+ { 0x1631, 0x1002, "Mitachi", "0x1002" },
+ { 0, 0, "" , "" }
+};
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+/* Offscreen layout */
+typedef struct _XGI_GLYINFO {
+ unsigned char ch;
+ int fontwidth;
+ int fontheight;
+ u8 gmask[72];
+ int ngmask;
+} XGI_GLYINFO;
+#endif
+
+typedef struct _XGI_OH {
+ struct _XGI_OH *poh_next;
+ struct _XGI_OH *poh_prev;
+ unsigned long offset;
+ unsigned long size;
+} XGI_OH;
+
+typedef struct _XGI_OHALLOC {
+ struct _XGI_OHALLOC *poha_next;
+ XGI_OH aoh[1];
+} XGI_OHALLOC;
+
+typedef struct _XGI_HEAP {
+ XGI_OH oh_free;
+ XGI_OH oh_used;
+ XGI_OH *poh_freelist;
+ XGI_OHALLOC *poha_chain;
+ unsigned long max_freesize;
+} XGI_HEAP;
+
+static unsigned long XGIfb_hwcursor_vbase;
+
+static unsigned long XGIfb_heap_start;
+static unsigned long XGIfb_heap_end;
+static unsigned long XGIfb_heap_size;
+static XGI_HEAP XGIfb_heap;
+
+// Eden Chen
+static const struct _XGI_TV_filter {
+ u8 filter[9][4];
+} XGI_TV_filter[] = {
+ { {{0x00,0x00,0x00,0x40}, /* NTSCFilter_0 */
+ {0x00,0xE0,0x10,0x60},
+ {0x00,0xEE,0x10,0x44},
+ {0x00,0xF4,0x10,0x38},
+ {0xF8,0xF4,0x18,0x38},
+ {0xFC,0xFB,0x14,0x2A},
+ {0x00,0x00,0x10,0x20},
+ {0x00,0x04,0x10,0x18},
+ {0xFF,0xFF,0xFF,0xFF} }},
+ { {{0x00,0x00,0x00,0x40}, /* NTSCFilter_1 */
+ {0x00,0xE0,0x10,0x60},
+ {0x00,0xEE,0x10,0x44},
+ {0x00,0xF4,0x10,0x38},
+ {0xF8,0xF4,0x18,0x38},
+ {0xFC,0xFB,0x14,0x2A},
+ {0x00,0x00,0x10,0x20},
+ {0x00,0x04,0x10,0x18},
+ {0xFF,0xFF,0xFF,0xFF} }},
+ { {{0x00,0x00,0x00,0x40}, /* NTSCFilter_2 */
+ {0xF5,0xEE,0x1B,0x44},
+ {0xF8,0xF4,0x18,0x38},
+ {0xEB,0x04,0x25,0x18},
+ {0xF1,0x05,0x1F,0x16},
+ {0xF6,0x06,0x1A,0x14},
+ {0xFA,0x06,0x16,0x14},
+ {0x00,0x04,0x10,0x18},
+ {0xFF,0xFF,0xFF,0xFF} }},
+ { {{0x00,0x00,0x00,0x40}, /* NTSCFilter_3 */
+ {0xF1,0x04,0x1F,0x18},
+ {0xEE,0x0D,0x22,0x06},
+ {0xF7,0x06,0x19,0x14},
+ {0xF4,0x0B,0x1C,0x0A},
+ {0xFA,0x07,0x16,0x12},
+ {0xF9,0x0A,0x17,0x0C},
+ {0x00,0x07,0x10,0x12},
+ {0xFF,0xFF,0xFF,0xFF} }},
+ { {{0x00,0x00,0x00,0x40}, /* NTSCFilter_4 */
+ {0x00,0xE0,0x10,0x60},
+ {0x00,0xEE,0x10,0x44},
+ {0x00,0xF4,0x10,0x38},
+ {0xF8,0xF4,0x18,0x38},
+ {0xFC,0xFB,0x14,0x2A},
+ {0x00,0x00,0x10,0x20},
+ {0x00,0x04,0x10,0x18},
+ {0xFF,0xFF,0xFF,0xFF} }},
+ { {{0x00,0x00,0x00,0x40}, /* NTSCFilter_5 */
+ {0xF5,0xEE,0x1B,0x44},
+ {0xF8,0xF4,0x18,0x38},
+ {0xEB,0x04,0x25,0x18},
+ {0xF1,0x05,0x1F,0x16},
+ {0xF6,0x06,0x1A,0x14},
+ {0xFA,0x06,0x16,0x14},
+ {0x00,0x04,0x10,0x18},
+ {0xFF,0xFF,0xFF,0xFF} }},
+ { {{0x00,0x00,0x00,0x40}, /* NTSCFilter_6 */
+ {0xEB,0x04,0x25,0x18},
+ {0xE7,0x0E,0x29,0x04},
+ {0xEE,0x0C,0x22,0x08},
+ {0xF6,0x0B,0x1A,0x0A},
+ {0xF9,0x0A,0x17,0x0C},
+ {0xFC,0x0A,0x14,0x0C},
+ {0x00,0x08,0x10,0x10},
+ {0xFF,0xFF,0xFF,0xFF} }},
+ { {{0x00,0x00,0x00,0x40}, /* NTSCFilter_7 */
+ {0xEC,0x02,0x24,0x1C},
+ {0xF2,0x04,0x1E,0x18},
+ {0xEB,0x15,0x25,0xF6},
+ {0xF4,0x10,0x1C,0x00},
+ {0xF8,0x0F,0x18,0x02},
+ {0x00,0x04,0x10,0x18},
+ {0x01,0x06,0x0F,0x14},
+ {0xFF,0xFF,0xFF,0xFF} }},
+ { {{0x00,0x00,0x00,0x40}, /* PALFilter_0 */
+ {0x00,0xE0,0x10,0x60},
+ {0x00,0xEE,0x10,0x44},
+ {0x00,0xF4,0x10,0x38},
+ {0xF8,0xF4,0x18,0x38},
+ {0xFC,0xFB,0x14,0x2A},
+ {0x00,0x00,0x10,0x20},
+ {0x00,0x04,0x10,0x18},
+ {0xFF,0xFF,0xFF,0xFF} }},
+ { {{0x00,0x00,0x00,0x40}, /* PALFilter_1 */
+ {0x00,0xE0,0x10,0x60},
+ {0x00,0xEE,0x10,0x44},
+ {0x00,0xF4,0x10,0x38},
+ {0xF8,0xF4,0x18,0x38},
+ {0xFC,0xFB,0x14,0x2A},
+ {0x00,0x00,0x10,0x20},
+ {0x00,0x04,0x10,0x18},
+ {0xFF,0xFF,0xFF,0xFF} }},
+ { {{0x00,0x00,0x00,0x40}, /* PALFilter_2 */
+ {0xF5,0xEE,0x1B,0x44},
+ {0xF8,0xF4,0x18,0x38},
+ {0xF1,0xF7,0x01,0x32},
+ {0xF5,0xFB,0x1B,0x2A},
+ {0xF9,0xFF,0x17,0x22},
+ {0xFB,0x01,0x15,0x1E},
+ {0x00,0x04,0x10,0x18},
+ {0xFF,0xFF,0xFF,0xFF} }},
+ { {{0x00,0x00,0x00,0x40}, /* PALFilter_3 */
+ {0xF5,0xFB,0x1B,0x2A},
+ {0xEE,0xFE,0x22,0x24},
+ {0xF3,0x00,0x1D,0x20},
+ {0xF9,0x03,0x17,0x1A},
+ {0xFB,0x02,0x14,0x1E},
+ {0xFB,0x04,0x15,0x18},
+ {0x00,0x06,0x10,0x14},
+ {0xFF,0xFF,0xFF,0xFF} }},
+ { {{0x00,0x00,0x00,0x40}, /* PALFilter_4 */
+ {0x00,0xE0,0x10,0x60},
+ {0x00,0xEE,0x10,0x44},
+ {0x00,0xF4,0x10,0x38},
+ {0xF8,0xF4,0x18,0x38},
+ {0xFC,0xFB,0x14,0x2A},
+ {0x00,0x00,0x10,0x20},
+ {0x00,0x04,0x10,0x18},
+ {0xFF,0xFF,0xFF,0xFF} }},
+ { {{0x00,0x00,0x00,0x40}, /* PALFilter_5 */
+ {0xF5,0xEE,0x1B,0x44},
+ {0xF8,0xF4,0x18,0x38},
+ {0xF1,0xF7,0x1F,0x32},
+ {0xF5,0xFB,0x1B,0x2A},
+ {0xF9,0xFF,0x17,0x22},
+ {0xFB,0x01,0x15,0x1E},
+ {0x00,0x04,0x10,0x18},
+ {0xFF,0xFF,0xFF,0xFF} }},
+ { {{0x00,0x00,0x00,0x40}, /* PALFilter_6 */
+ {0xF5,0xEE,0x1B,0x2A},
+ {0xEE,0xFE,0x22,0x24},
+ {0xF3,0x00,0x1D,0x20},
+ {0xF9,0x03,0x17,0x1A},
+ {0xFB,0x02,0x14,0x1E},
+ {0xFB,0x04,0x15,0x18},
+ {0x00,0x06,0x10,0x14},
+ {0xFF,0xFF,0xFF,0xFF} }},
+ { {{0x00,0x00,0x00,0x40}, /* PALFilter_7 */
+ {0xF5,0xEE,0x1B,0x44},
+ {0xF8,0xF4,0x18,0x38},
+ {0xFC,0xFB,0x14,0x2A},
+ {0xEB,0x05,0x25,0x16},
+ {0xF1,0x05,0x1F,0x16},
+ {0xFA,0x07,0x16,0x12},
+ {0x00,0x07,0x10,0x12},
+ {0xFF,0xFF,0xFF,0xFF} }}
+};
+
+static int filter = -1;
+static unsigned char filter_tb;
+
+
+/* ---------------------- Routine prototypes ------------------------- */
+
+/* Interface used by the world */
+#ifndef MODULE
+XGIINITSTATIC int __init XGIfb_setup(char *options);
+#endif
+
+/* Interface to the low level console driver */
+
+
+
+/* fbdev routines */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+ int XGIfb_init(void);
+static int XGIfb_get_fix(struct fb_fix_screeninfo *fix,
+ int con,
+ struct fb_info *info);
+static int XGIfb_get_var(struct fb_var_screeninfo *var,
+ int con,
+ struct fb_info *info);
+static int XGIfb_set_var(struct fb_var_screeninfo *var,
+ int con,
+ struct fb_info *info);
+static void XGIfb_crtc_to_var(struct fb_var_screeninfo *var);
+static int XGIfb_get_cmap(struct fb_cmap *cmap,
+ int kspc,
+ int con,
+ struct fb_info *info);
+static int XGIfb_set_cmap(struct fb_cmap *cmap,
+ int kspc,
+ int con,
+ struct fb_info *info);
+static int XGIfb_update_var(int con,
+ struct fb_info *info);
+static int XGIfb_switch(int con,
+ struct fb_info *info);
+static void XGIfb_blank(int blank,
+ struct fb_info *info);
+static void XGIfb_set_disp(int con,
+ struct fb_var_screeninfo *var,
+ struct fb_info *info);
+static int XGI_getcolreg(unsigned regno, unsigned *red, unsigned *green,
+ unsigned *blue, unsigned *transp,
+ struct fb_info *fb_info);
+static void XGIfb_do_install_cmap(int con,
+ struct fb_info *info);
+static void XGI_get_glyph(struct fb_info *info,
+ XGI_GLYINFO *gly);
+static int XGIfb_mmap(struct fb_info *info, struct file *file,
+ struct vm_area_struct *vma);
+static int XGIfb_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg, int con,
+ struct fb_info *info);
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+XGIINITSTATIC int __init xgifb_init(void);
+static int XGIfb_set_par(struct fb_info *info);
+static int XGIfb_blank(int blank,
+ struct fb_info *info);
+/*static int XGIfb_mmap(struct fb_info *info, struct file *file,
+ struct vm_area_struct *vma);
+*/
+extern void fbcon_XGI_fillrect(struct fb_info *info,
+ const struct fb_fillrect *rect);
+extern void fbcon_XGI_copyarea(struct fb_info *info,
+ const struct fb_copyarea *area);
+#if 0
+extern void cfb_imageblit(struct fb_info *info,
+ const struct fb_image *image);
+#endif
+extern int fbcon_XGI_sync(struct fb_info *info);
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15)
+static int XGIfb_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg);
+#else
+static int XGIfb_ioctl(struct inode *inode,
+ struct file *file,
+ unsigned int cmd,
+ unsigned long arg,
+ struct fb_info *info);
+#endif
+
+/*
+extern int XGIfb_mode_rate_to_dclock(VB_DEVICE_INFO *XGI_Pr,
+ PXGI_HW_DEVICE_INFO HwDeviceExtension,
+ unsigned char modeno, unsigned char rateindex);
+extern int XGIfb_mode_rate_to_ddata(VB_DEVICE_INFO *XGI_Pr, PXGI_HW_DEVICE_INFO HwDeviceExtension,
+ unsigned char modeno, unsigned char rateindex,
+ unsigned int *left_margin, unsigned int *right_margin,
+ unsigned int *upper_margin, unsigned int *lower_margin,
+ unsigned int *hsync_len, unsigned int *vsync_len,
+ unsigned int *sync, unsigned int *vmode);
+*/
+#endif
+ extern BOOLEAN XGI_SearchModeID( USHORT ModeNo,USHORT *ModeIdIndex, PVB_DEVICE_INFO );
+static int XGIfb_get_fix(struct fb_fix_screeninfo *fix, int con,
+ struct fb_info *info);
+
+/* Internal 2D accelerator functions */
+extern int XGIfb_initaccel(void);
+extern void XGIfb_syncaccel(void);
+
+/* Internal general routines */
+static void XGIfb_search_mode(const char *name);
+static int XGIfb_validate_mode(int modeindex);
+static u8 XGIfb_search_refresh_rate(unsigned int rate);
+static int XGIfb_setcolreg(unsigned regno, unsigned red, unsigned green,
+ unsigned blue, unsigned transp,
+ struct fb_info *fb_info);
+static int XGIfb_do_set_var(struct fb_var_screeninfo *var, int isactive,
+ struct fb_info *info);
+static void XGIfb_pre_setmode(void);
+static void XGIfb_post_setmode(void);
+
+static BOOLEAN XGIfb_CheckVBRetrace(void);
+static BOOLEAN XGIfbcheckvretracecrt2(void);
+static BOOLEAN XGIfbcheckvretracecrt1(void);
+static BOOLEAN XGIfb_bridgeisslave(void);
+
+struct XGI_memreq {
+ unsigned long offset;
+ unsigned long size;
+};
+
+/* XGI-specific Export functions */
+void XGI_dispinfo(struct ap_data *rec);
+void XGI_malloc(struct XGI_memreq *req);
+void XGI_free(unsigned long base);
+
+/* Internal hardware access routines */
+void XGIfb_set_reg4(u16 port, unsigned long data);
+u32 XGIfb_get_reg3(u16 port);
+
+/* Chipset-dependent internal routines */
+
+
+static int XGIfb_get_dram_size(void);
+static void XGIfb_detect_VB(void);
+static void XGIfb_get_VB_type(void);
+static int XGIfb_has_VB(void);
+
+
+/* Internal heap routines */
+static int XGIfb_heap_init(void);
+static XGI_OH *XGIfb_poh_new_node(void);
+static XGI_OH *XGIfb_poh_allocate(unsigned long size);
+static void XGIfb_delete_node(XGI_OH *poh);
+static void XGIfb_insert_node(XGI_OH *pohList, XGI_OH *poh);
+static XGI_OH *XGIfb_poh_free(unsigned long base);
+static void XGIfb_free_node(XGI_OH *poh);
+
+/* Internal routines to access PCI configuration space */
+BOOLEAN XGIfb_query_VGA_config_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
+ unsigned long offset, unsigned long set, unsigned long *value);
+//BOOLEAN XGIfb_query_north_bridge_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
+// unsigned long offset, unsigned long set, unsigned long *value);
+
+
+/* Routines from init.c/init301.c */
+extern void InitTo330Pointer(UCHAR,PVB_DEVICE_INFO pVBInfo);
+extern BOOLEAN XGIInitNew(PXGI_HW_DEVICE_INFO HwDeviceExtension);
+extern BOOLEAN XGISetModeNew(PXGI_HW_DEVICE_INFO HwDeviceExtension, USHORT ModeNo);
+//extern void XGI_SetEnableDstn(VB_DEVICE_INFO *XGI_Pr);
+extern void XGI_LongWait(VB_DEVICE_INFO *XGI_Pr);
+extern USHORT XGI_GetRatePtrCRT2( PXGI_HW_DEVICE_INFO pXGIHWDE, USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo );
+/* TW: Chrontel TV functions */
+extern USHORT XGI_GetCH700x(VB_DEVICE_INFO *XGI_Pr, USHORT tempbx);
+extern void XGI_SetCH700x(VB_DEVICE_INFO *XGI_Pr, USHORT tempbx);
+extern USHORT XGI_GetCH701x(VB_DEVICE_INFO *XGI_Pr, USHORT tempbx);
+extern void XGI_SetCH701x(VB_DEVICE_INFO *XGI_Pr, USHORT tempbx);
+extern void XGI_SetCH70xxANDOR(VB_DEVICE_INFO *XGI_Pr, USHORT tempax,USHORT tempbh);
+extern void XGI_DDC2Delay(VB_DEVICE_INFO *XGI_Pr, USHORT delaytime);
+
+/* TW: Sensing routines */
+void XGI_Sense30x(void);
+int XGIDoSense(int tempbl, int tempbh, int tempcl, int tempch);
+
+extern XGI21_LVDSCapStruct XGI21_LCDCapList[13];
+#endif
diff --git a/drivers/staging/xgifb/XGI_main_26.c b/drivers/staging/xgifb/XGI_main_26.c
new file mode 100644
index 0000000..867012b
--- /dev/null
+++ b/drivers/staging/xgifb/XGI_main_26.c
@@ -0,0 +1,3773 @@
+/*
+ * XG20, XG21, XG40, XG42 frame buffer device
+ * for Linux kernels 2.5.x, 2.6.x
+ * Base on TW's sis fbdev code.
+ */
+
+//#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/console.h>
+#include <linux/selection.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+#include <linux/vt_kern.h>
+#include <linux/capability.h>
+#include <linux/fs.h>
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <linux/kernel.h>
+
+#include "osdef.h"
+
+
+#ifndef XGIFB_PAN
+#define XGIFB_PAN
+#endif
+
+#include <asm/io.h>
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
+
+#include "XGIfb.h"
+#include "vgatypes.h"
+#include "XGI_main.h"
+#include "vb_util.h"
+
+
+#define Index_CR_GPIO_Reg1 0x48
+#define Index_CR_GPIO_Reg2 0x49
+#define Index_CR_GPIO_Reg3 0x4a
+
+#define GPIOG_EN (1<<6)
+#define GPIOG_WRITE (1<<6)
+#define GPIOG_READ (1<<1)
+int XGIfb_GetXG21DefaultLVDSModeIdx(void);
+
+/* -------------------- Macro definitions ---------------------------- */
+
+#undef XGIFBDEBUG
+
+#ifdef XGIFBDEBUG
+#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , ## args)
+#else
+#define DPRINTK(fmt, args...)
+#endif
+
+#ifdef XGIFBDEBUG
+static void dumpVGAReg(void)
+{
+ u8 i,reg;
+
+outXGIIDXREG(XGISR, 0x05, 0x86);
+/*
+outXGIIDXREG(XGISR, 0x08, 0x4f);
+outXGIIDXREG(XGISR, 0x0f, 0x20);
+outXGIIDXREG(XGISR, 0x11, 0x4f);
+outXGIIDXREG(XGISR, 0x13, 0x45);
+outXGIIDXREG(XGISR, 0x14, 0x51);
+outXGIIDXREG(XGISR, 0x1e, 0x41);
+outXGIIDXREG(XGISR, 0x1f, 0x0);
+outXGIIDXREG(XGISR, 0x20, 0xa1);
+outXGIIDXREG(XGISR, 0x22, 0xfb);
+outXGIIDXREG(XGISR, 0x26, 0x22);
+outXGIIDXREG(XGISR, 0x3e, 0x07);
+*/
+
+//outXGIIDXREG(XGICR, 0x19, 0x00);
+//outXGIIDXREG(XGICR, 0x1a, 0x3C);
+//outXGIIDXREG(XGICR, 0x22, 0xff);
+//outXGIIDXREG(XGICR, 0x3D, 0x10);
+
+//outXGIIDXREG(XGICR, 0x4a, 0xf3);
+
+//outXGIIDXREG(XGICR, 0x57, 0x0);
+//outXGIIDXREG(XGICR, 0x7a, 0x2c);
+
+//outXGIIDXREG(XGICR, 0x82, 0xcc);
+//outXGIIDXREG(XGICR, 0x8c, 0x0);
+/*
+outXGIIDXREG(XGICR, 0x99, 0x1);
+outXGIIDXREG(XGICR, 0x41, 0x40);
+*/
+
+ for(i=0; i < 0x4f; i++)
+ {
+ inXGIIDXREG(XGISR, i, reg);
+ printk("\no 3c4 %x",i);
+ printk("\ni 3c5 => %x",reg);
+ }
+
+ for(i=0; i < 0xF0; i++)
+ {
+ inXGIIDXREG(XGICR, i, reg);
+ printk("\no 3d4 %x",i);
+ printk("\ni 3d5 => %x",reg);
+ }
+/*
+
+ outXGIIDXREG(XGIPART1,0x2F,1);
+ for(i=1; i < 0x50; i++)
+ {
+ inXGIIDXREG(XGIPART1, i, reg);
+ printk("\no d004 %x",i);
+ printk("\ni d005 => %x",reg);
+ }
+
+ for(i=0; i < 0x50; i++)
+ {
+ inXGIIDXREG(XGIPART2, i, reg);
+ printk("\no d010 %x",i);
+ printk("\ni d011 => %x",reg);
+ }
+ for(i=0; i < 0x50; i++)
+ {
+ inXGIIDXREG(XGIPART3, i, reg);
+ printk("\no d012 %x",i);
+ printk("\ni d013 => %x",reg);
+ }
+ for(i=0; i < 0x50; i++)
+ {
+ inXGIIDXREG(XGIPART4, i, reg);
+ printk("\no d014 %x",i);
+ printk("\ni d015 => %x",reg);
+ }
+*/
+}
+#else
+static inline void dumpVGAReg(void) {}
+#endif
+
+/* data for XGI components */
+struct video_info xgi_video_info;
+
+
+#if 1
+#define DEBUGPRN(x)
+#else
+#define DEBUGPRN(x) printk(KERN_INFO x "\n");
+#endif
+
+
+/* --------------- Hardware Access Routines -------------------------- */
+
+#ifdef LINUX_KERNEL
+int
+XGIfb_mode_rate_to_dclock(VB_DEVICE_INFO *XGI_Pr, PXGI_HW_DEVICE_INFO HwDeviceExtension,
+ unsigned char modeno, unsigned char rateindex)
+{
+ USHORT ModeNo = modeno;
+ USHORT ModeIdIndex = 0, ClockIndex = 0;
+ USHORT RefreshRateTableIndex = 0;
+
+ /*ULONG temp = 0;*/
+ int Clock;
+ XGI_Pr->ROMAddr = HwDeviceExtension->pjVirtualRomBase;
+ InitTo330Pointer( HwDeviceExtension->jChipType, XGI_Pr ) ;
+
+ RefreshRateTableIndex = XGI_GetRatePtrCRT2( HwDeviceExtension, ModeNo , ModeIdIndex, XGI_Pr ) ;
+
+/*
+ temp = XGI_SearchModeID( ModeNo , &ModeIdIndex, XGI_Pr ) ;
+ if(!temp) {
+ printk(KERN_ERR "Could not find mode %x\n", ModeNo);
+ return 65000;
+ }
+
+ RefreshRateTableIndex = XGI_Pr->EModeIDTable[ModeIdIndex].REFindex;
+ RefreshRateTableIndex += (rateindex - 1);
+
+*/
+ ClockIndex = XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
+ if(HwDeviceExtension->jChipType < XGI_315H) {
+ ClockIndex &= 0x3F;
+ }
+ Clock = XGI_Pr->VCLKData[ClockIndex].CLOCK * 1000 ;
+
+ return(Clock);
+}
+
+int
+XGIfb_mode_rate_to_ddata(VB_DEVICE_INFO *XGI_Pr, PXGI_HW_DEVICE_INFO HwDeviceExtension,
+ unsigned char modeno, unsigned char rateindex,
+ u32 *left_margin, u32 *right_margin,
+ u32 *upper_margin, u32 *lower_margin,
+ u32 *hsync_len, u32 *vsync_len,
+ u32 *sync, u32 *vmode)
+{
+ USHORT ModeNo = modeno;
+ USHORT ModeIdIndex = 0, index = 0;
+ USHORT RefreshRateTableIndex = 0;
+
+ unsigned short VRE, VBE, VRS, VBS, VDE, VT;
+ unsigned short HRE, HBE, HRS, HBS, HDE, HT;
+ unsigned char sr_data, cr_data, cr_data2;
+ unsigned long cr_data3;
+ int A, B, C, D, E, F, temp, j;
+ XGI_Pr->ROMAddr = HwDeviceExtension->pjVirtualRomBase;
+ InitTo330Pointer( HwDeviceExtension->jChipType, XGI_Pr ) ;
+ RefreshRateTableIndex = XGI_GetRatePtrCRT2( HwDeviceExtension, ModeNo , ModeIdIndex, XGI_Pr ) ;
+/*
+ temp = XGI_SearchModeID( ModeNo, &ModeIdIndex, XGI_Pr);
+ if(!temp) return 0;
+
+ RefreshRateTableIndex = XGI_Pr->EModeIDTable[ModeIdIndex].REFindex;
+ RefreshRateTableIndex += (rateindex - 1);
+*/
+ index = XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+
+ sr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[5];
+
+ cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[0];
+
+ /* Horizontal total */
+ HT = (cr_data & 0xff) |
+ ((unsigned short) (sr_data & 0x03) << 8);
+ A = HT + 5;
+
+ /*cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[1];
+
+ Horizontal display enable end
+ HDE = (cr_data & 0xff) |
+ ((unsigned short) (sr_data & 0x0C) << 6);*/
+ HDE = (XGI_Pr->RefIndex[RefreshRateTableIndex].XRes >> 3) -1;
+ E = HDE + 1;
+
+ cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[3];
+
+ /* Horizontal retrace (=sync) start */
+ HRS = (cr_data & 0xff) |
+ ((unsigned short) (sr_data & 0xC0) << 2);
+ F = HRS - E - 3;
+
+ cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[1];
+
+ /* Horizontal blank start */
+ HBS = (cr_data & 0xff) |
+ ((unsigned short) (sr_data & 0x30) << 4);
+
+ sr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[6];
+
+ cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[2];
+
+ cr_data2 = XGI_Pr->XGINEWUB_CRT1Table[index].CR[4];
+
+ /* Horizontal blank end */
+ HBE = (cr_data & 0x1f) |
+ ((unsigned short) (cr_data2 & 0x80) >> 2) |
+ ((unsigned short) (sr_data & 0x03) << 6);
+
+ /* Horizontal retrace (=sync) end */
+ HRE = (cr_data2 & 0x1f) | ((sr_data & 0x04) << 3);
+
+ temp = HBE - ((E - 1) & 255);
+ B = (temp > 0) ? temp : (temp + 256);
+
+ temp = HRE - ((E + F + 3) & 63);
+ C = (temp > 0) ? temp : (temp + 64);
+
+ D = B - F - C;
+
+ *left_margin = D * 8;
+ *right_margin = F * 8;
+ *hsync_len = C * 8;
+
+ sr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[14];
+
+ cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[8];
+
+ cr_data2 = XGI_Pr->XGINEWUB_CRT1Table[index].CR[9];
+
+ /* Vertical total */
+ VT = (cr_data & 0xFF) |
+ ((unsigned short) (cr_data2 & 0x01) << 8) |
+ ((unsigned short)(cr_data2 & 0x20) << 4) |
+ ((unsigned short) (sr_data & 0x01) << 10);
+ A = VT + 2;
+
+ //cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[10];
+
+ /* Vertical display enable end */
+/* VDE = (cr_data & 0xff) |
+ ((unsigned short) (cr_data2 & 0x02) << 7) |
+ ((unsigned short) (cr_data2 & 0x40) << 3) |
+ ((unsigned short) (sr_data & 0x02) << 9); */
+ VDE = XGI_Pr->RefIndex[RefreshRateTableIndex].YRes -1;
+ E = VDE + 1;
+
+ cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[10];
+
+ /* Vertical retrace (=sync) start */
+ VRS = (cr_data & 0xff) |
+ ((unsigned short) (cr_data2 & 0x04) << 6) |
+ ((unsigned short) (cr_data2 & 0x80) << 2) |
+ ((unsigned short) (sr_data & 0x08) << 7);
+ F = VRS + 1 - E;
+
+ cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[12];
+
+ cr_data3 = (XGI_Pr->XGINEWUB_CRT1Table[index].CR[14] & 0x80) << 5;
+
+ /* Vertical blank start */
+ VBS = (cr_data & 0xff) |
+ ((unsigned short) (cr_data2 & 0x08) << 5) |
+ ((unsigned short) (cr_data3 & 0x20) << 4) |
+ ((unsigned short) (sr_data & 0x04) << 8);
+
+ cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[13];
+
+ /* Vertical blank end */
+ VBE = (cr_data & 0xff) |
+ ((unsigned short) (sr_data & 0x10) << 4);
+ temp = VBE - ((E - 1) & 511);
+ B = (temp > 0) ? temp : (temp + 512);
+
+ cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[11];
+
+ /* Vertical retrace (=sync) end */
+ VRE = (cr_data & 0x0f) | ((sr_data & 0x20) >> 1);
+ temp = VRE - ((E + F - 1) & 31);
+ C = (temp > 0) ? temp : (temp + 32);
+
+ D = B - F - C;
+
+ *upper_margin = D;
+ *lower_margin = F;
+ *vsync_len = C;
+
+ if(XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_InfoFlag & 0x8000)
+ *sync &= ~FB_SYNC_VERT_HIGH_ACT;
+ else
+ *sync |= FB_SYNC_VERT_HIGH_ACT;
+
+ if(XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_InfoFlag & 0x4000)
+ *sync &= ~FB_SYNC_HOR_HIGH_ACT;
+ else
+ *sync |= FB_SYNC_HOR_HIGH_ACT;
+
+ *vmode = FB_VMODE_NONINTERLACED;
+ if(XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_InfoFlag & 0x0080)
+ *vmode = FB_VMODE_INTERLACED;
+ else {
+ j = 0;
+ while(XGI_Pr->EModeIDTable[j].Ext_ModeID != 0xff) {
+ if(XGI_Pr->EModeIDTable[j].Ext_ModeID ==
+ XGI_Pr->RefIndex[RefreshRateTableIndex].ModeID) {
+ if(XGI_Pr->EModeIDTable[j].Ext_ModeFlag & DoubleScanMode) {
+ *vmode = FB_VMODE_DOUBLE;
+ }
+ break;
+ }
+ j++;
+ }
+ }
+
+#if 0 /* That's bullshit, only the resolution needs to be shifted */
+ if((*vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) {
+ *upper_margin <<= 1;
+ *lower_margin <<= 1;
+ *vsync_len <<= 1;
+ } else if((*vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE) {
+ *upper_margin >>= 1;
+ *lower_margin >>= 1;
+ *vsync_len >>= 1;
+ }
+#endif
+
+ return 1;
+}
+
+#endif
+
+
+
+void XGIRegInit(VB_DEVICE_INFO *XGI_Pr, ULONG BaseAddr)
+{
+ XGI_Pr->RelIO = BaseAddr;
+ XGI_Pr->P3c4 = BaseAddr + 0x14;
+ XGI_Pr->P3d4 = BaseAddr + 0x24;
+ XGI_Pr->P3c0 = BaseAddr + 0x10;
+ XGI_Pr->P3ce = BaseAddr + 0x1e;
+ XGI_Pr->P3c2 = BaseAddr + 0x12;
+ XGI_Pr->P3ca = BaseAddr + 0x1a;
+ XGI_Pr->P3c6 = BaseAddr + 0x16;
+ XGI_Pr->P3c7 = BaseAddr + 0x17;
+ XGI_Pr->P3c8 = BaseAddr + 0x18;
+ XGI_Pr->P3c9 = BaseAddr + 0x19;
+ XGI_Pr->P3da = BaseAddr + 0x2A;
+ XGI_Pr->Part1Port = BaseAddr + XGI_CRT2_PORT_04; /* Digital video interface registers (LCD) */
+ XGI_Pr->Part2Port = BaseAddr + XGI_CRT2_PORT_10; /* 301 TV Encoder registers */
+ XGI_Pr->Part3Port = BaseAddr + XGI_CRT2_PORT_12; /* 301 Macrovision registers */
+ XGI_Pr->Part4Port = BaseAddr + XGI_CRT2_PORT_14; /* 301 VGA2 (and LCD) registers */
+ XGI_Pr->Part5Port = BaseAddr + XGI_CRT2_PORT_14+2; /* 301 palette address port registers */
+
+}
+
+
+void XGIfb_set_reg4(u16 port, unsigned long data)
+{
+ outl((u32) (data & 0xffffffff), port);
+}
+
+u32 XGIfb_get_reg3(u16 port)
+{
+ u32 data;
+
+ data = inl(port);
+ return (data);
+}
+
+/* ------------ Interface for init & mode switching code ------------- */
+
+BOOLEAN
+XGIfb_query_VGA_config_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
+ unsigned long offset, unsigned long set, unsigned long *value)
+{
+ static struct pci_dev *pdev = NULL;
+ static unsigned char init = 0, valid_pdev = 0;
+
+ if (!set)
+ DPRINTK("XGIfb: Get VGA offset 0x%lx\n", offset);
+ else
+ DPRINTK("XGIfb: Set offset 0x%lx to 0x%lx\n", offset, *value);
+
+ if (!init) {
+ init = TRUE;
+ pdev = pci_get_device(PCI_VENDOR_ID_XG, xgi_video_info.chip_id, pdev);
+ if (pdev) {
+ valid_pdev = TRUE;
+ pci_dev_put(pdev);
+ }
+ }
+
+ if (!valid_pdev) {
+ printk(KERN_DEBUG "XGIfb: Can't find XGI %d VGA device.\n",
+ xgi_video_info.chip_id);
+ return FALSE;
+ }
+
+ if (set == 0)
+ pci_read_config_dword(pdev, offset, (u32 *)value);
+ else
+ pci_write_config_dword(pdev, offset, (u32)(*value));
+
+ return TRUE;
+}
+
+/*BOOLEAN XGIfb_query_north_bridge_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
+ unsigned long offset, unsigned long set, unsigned long *value)
+{
+ static struct pci_dev *pdev = NULL;
+ static unsigned char init = 0, valid_pdev = 0;
+ u16 nbridge_id = 0;
+
+ if (!init) {
+ init = TRUE;
+ switch (xgi_video_info.chip) {
+ case XGI_540:
+ nbridge_id = PCI_DEVICE_ID_XG_540;
+ break;
+ case XGI_630:
+ nbridge_id = PCI_DEVICE_ID_XG_630;
+ break;
+ case XGI_730:
+ nbridge_id = PCI_DEVICE_ID_XG_730;
+ break;
+ case XGI_550:
+ nbridge_id = PCI_DEVICE_ID_XG_550;
+ break;
+ case XGI_650:
+ nbridge_id = PCI_DEVICE_ID_XG_650;
+ break;
+ case XGI_740:
+ nbridge_id = PCI_DEVICE_ID_XG_740;
+ break;
+ default:
+ nbridge_id = 0;
+ break;
+ }
+
+ pdev = pci_find_device(PCI_VENDOR_ID_SI, nbridge_id, pdev);
+ if (pdev)
+ valid_pdev = TRUE;
+ }
+
+ if (!valid_pdev) {
+ printk(KERN_DEBUG "XGIfb: Can't find XGI %d North Bridge device.\n",
+ nbridge_id);
+ return FALSE;
+ }
+
+ if (set == 0)
+ pci_read_config_dword(pdev, offset, (u32 *)value);
+ else
+ pci_write_config_dword(pdev, offset, (u32)(*value));
+
+ return TRUE;
+}
+*/
+/* ------------------ Internal helper routines ----------------- */
+
+static void XGIfb_search_mode(const char *name)
+{
+ int i = 0, j = 0, l;
+
+ if(name == NULL) {
+ printk(KERN_ERR "XGIfb: Internal error, using default mode.\n");
+ xgifb_mode_idx = DEFAULT_MODE;
+ if ((xgi_video_info.chip == XG21) && ((xgi_video_info.disp_state & DISPTYPE_DISP2) == DISPTYPE_LCD))
+ {
+ xgifb_mode_idx = XGIfb_GetXG21DefaultLVDSModeIdx();
+ }
+ return;
+ }
+
+
+ if (!strcmp(name, XGIbios_mode[MODE_INDEX_NONE].name)) {
+ printk(KERN_ERR "XGIfb: Mode 'none' not supported anymore. Using default.\n");
+ xgifb_mode_idx = DEFAULT_MODE;
+ if ((xgi_video_info.chip == XG21) && ((xgi_video_info.disp_state & DISPTYPE_DISP2) == DISPTYPE_LCD))
+ {
+ xgifb_mode_idx = XGIfb_GetXG21DefaultLVDSModeIdx();
+ }
+ return;
+ }
+
+ while(XGIbios_mode[i].mode_no != 0) {
+ l = min(strlen(name), strlen(XGIbios_mode[i].name));
+ if (!strncmp(name, XGIbios_mode[i].name, l)) {
+ xgifb_mode_idx = i;
+ j = 1;
+ break;
+ }
+ i++;
+ }
+ if(!j) printk(KERN_INFO "XGIfb: Invalid mode '%s'\n", name);
+}
+
+static void XGIfb_search_vesamode(unsigned int vesamode)
+{
+ int i = 0, j = 0;
+
+ if(vesamode == 0) {
+
+ printk(KERN_ERR "XGIfb: Mode 'none' not supported anymore. Using default.\n");
+ xgifb_mode_idx = DEFAULT_MODE;
+ if ((xgi_video_info.chip == XG21) && ((xgi_video_info.disp_state & DISPTYPE_DISP2) == DISPTYPE_LCD))
+ {
+ xgifb_mode_idx = XGIfb_GetXG21DefaultLVDSModeIdx();
+ }
+ return;
+ }
+
+ vesamode &= 0x1dff; /* Clean VESA mode number from other flags */
+
+ while(XGIbios_mode[i].mode_no != 0) {
+ if( (XGIbios_mode[i].vesa_mode_no_1 == vesamode) ||
+ (XGIbios_mode[i].vesa_mode_no_2 == vesamode) ) {
+ xgifb_mode_idx = i;
+ j = 1;
+ break;
+ }
+ i++;
+ }
+ if(!j) printk(KERN_INFO "XGIfb: Invalid VESA mode 0x%x'\n", vesamode);
+}
+
+int XGIfb_GetXG21LVDSData(void)
+{
+ u8 tmp;
+ unsigned char *pData;
+ int i,j,k;
+
+ inXGIIDXREG(XGISR,0x1e,tmp);
+ outXGIIDXREG(XGISR, 0x1e, tmp|4);
+
+ pData = xgi_video_info.mmio_vbase+0x20000;
+ if ((pData[0x0]==0x55) && (pData[0x1]==0xAA) && (pData[0x65] & 0x1))
+ {
+ i = pData[ 0x316 ] | ( pData[ 0x317 ] << 8 );
+ j = pData[ i-1 ] ;
+ if ( j == 0xff )
+ {
+ j = 1;
+ }
+ k = 0;
+ do
+ {
+ XGI21_LCDCapList[k].LVDS_Capability = pData[ i ] | ( pData[ i + 1 ] << 8 );
+ XGI21_LCDCapList[k].LVDSHT = pData[ i + 2 ] | ( pData[ i + 3 ] << 8 ) ;
+ XGI21_LCDCapList[k].LVDSVT = pData[ i + 4 ] | ( pData[ i + 5 ] << 8 );
+ XGI21_LCDCapList[k].LVDSHDE = pData[ i + 6 ] | ( pData[ i + 7 ] << 8 );
+ XGI21_LCDCapList[k].LVDSVDE = pData[ i + 8 ] | ( pData[ i + 9 ] << 8 );
+ XGI21_LCDCapList[k].LVDSHFP = pData[ i + 10 ] | ( pData[ i + 11 ] << 8 );
+ XGI21_LCDCapList[k].LVDSVFP = pData[ i + 12 ] | ( pData[ i + 13 ] << 8 );
+ XGI21_LCDCapList[k].LVDSHSYNC = pData[ i + 14 ] | ( pData[ i + 15 ] << 8 );
+ XGI21_LCDCapList[k].LVDSVSYNC = pData[ i + 16 ] | ( pData[ i + 17 ] << 8 );
+ XGI21_LCDCapList[k].VCLKData1 = pData[ i + 18 ] ;
+ XGI21_LCDCapList[k].VCLKData2 = pData[ i + 19 ] ;
+ XGI21_LCDCapList[k].PSC_S1 = pData[ i + 20 ] ;
+ XGI21_LCDCapList[k].PSC_S2 = pData[ i + 21 ] ;
+ XGI21_LCDCapList[k].PSC_S3 = pData[ i + 22 ] ;
+ XGI21_LCDCapList[k].PSC_S4 = pData[ i + 23 ] ;
+ XGI21_LCDCapList[k].PSC_S5 = pData[ i + 24 ] ;
+ i += 25;
+ j--;
+ k++;
+ } while ( (j>0) && ( k < (sizeof(XGI21_LCDCapList)/sizeof(XGI21_LVDSCapStruct)) ) );
+ return 1;
+ }
+ return 0;
+}
+
+int XGIfb_GetXG21DefaultLVDSModeIdx(void)
+{
+
+ int found_mode = 0;
+ int XGIfb_mode_idx = 0;
+
+ found_mode = 0;
+ while( (XGIbios_mode[XGIfb_mode_idx].mode_no != 0) &&
+ (XGIbios_mode[XGIfb_mode_idx].xres <= XGI21_LCDCapList[0].LVDSHDE) )
+ {
+ if( (XGIbios_mode[XGIfb_mode_idx].xres == XGI21_LCDCapList[0].LVDSHDE) &&
+ (XGIbios_mode[XGIfb_mode_idx].yres == XGI21_LCDCapList[0].LVDSVDE) &&
+ (XGIbios_mode[XGIfb_mode_idx].bpp == 8))
+ {
+ XGIfb_mode_no = XGIbios_mode[XGIfb_mode_idx].mode_no;
+ found_mode = 1;
+ break;
+ }
+ XGIfb_mode_idx++;
+ }
+ if (!found_mode)
+ XGIfb_mode_idx = 0;
+
+ return (XGIfb_mode_idx);
+}
+
+
+static int XGIfb_validate_mode(int myindex)
+{
+ u16 xres, yres;
+
+ if (xgi_video_info.chip == XG21)
+ {
+ if ((xgi_video_info.disp_state & DISPTYPE_DISP2) == DISPTYPE_LCD)
+ {
+ xres = XGI21_LCDCapList[0].LVDSHDE;
+ yres = XGI21_LCDCapList[0].LVDSVDE;
+ if(XGIbios_mode[myindex].xres > xres)
+ return(-1);
+ if(XGIbios_mode[myindex].yres > yres)
+ return(-1);
+ if ((XGIbios_mode[myindex].xres < xres) && (XGIbios_mode[myindex].yres < yres) )
+ {
+ if (XGIbios_mode[myindex].bpp > 8)
+ return(-1);
+ }
+
+ }
+ return(myindex);
+
+ }
+
+ /* FIXME: for now, all is valid on XG27 */
+ if (xgi_video_info.chip == XG27)
+ return(myindex);
+
+ if(!(XGIbios_mode[myindex].chipset & MD_XGI315))
+ return(-1);
+
+ switch (xgi_video_info.disp_state & DISPTYPE_DISP2) {
+ case DISPTYPE_LCD:
+ switch (XGIhw_ext.ulCRT2LCDType) {
+ case LCD_640x480:
+ xres = 640; yres = 480; break;
+ case LCD_800x600:
+ xres = 800; yres = 600; break;
+ case LCD_1024x600:
+ xres = 1024; yres = 600; break;
+ case LCD_1024x768:
+ xres = 1024; yres = 768; break;
+ case LCD_1152x768:
+ xres = 1152; yres = 768; break;
+ case LCD_1280x960:
+ xres = 1280; yres = 960; break;
+ case LCD_1280x768:
+ xres = 1280; yres = 768; break;
+ case LCD_1280x1024:
+ xres = 1280; yres = 1024; break;
+ case LCD_1400x1050:
+ xres = 1400; yres = 1050; break;
+ case LCD_1600x1200:
+ xres = 1600; yres = 1200; break;
+// case LCD_320x480: // TW: FSTN
+// xres = 320; yres = 480; break;
+ default:
+ xres = 0; yres = 0; break;
+ }
+ if(XGIbios_mode[myindex].xres > xres) {
+ return(-1);
+ }
+ if(XGIbios_mode[myindex].yres > yres) {
+ return(-1);
+ }
+ if((XGIhw_ext.ulExternalChip == 0x01) || // LVDS
+ (XGIhw_ext.ulExternalChip == 0x05)) // LVDS+Chrontel
+ {
+ switch (XGIbios_mode[myindex].xres) {
+ case 512:
+ if(XGIbios_mode[myindex].yres != 512) return -1;
+ if(XGIhw_ext.ulCRT2LCDType == LCD_1024x600) return -1;
+ break;
+ case 640:
+ if((XGIbios_mode[myindex].yres != 400) &&
+ (XGIbios_mode[myindex].yres != 480))
+ return -1;
+ break;
+ case 800:
+ if(XGIbios_mode[myindex].yres != 600) return -1;
+ break;
+ case 1024:
+ if((XGIbios_mode[myindex].yres != 600) &&
+ (XGIbios_mode[myindex].yres != 768))
+ return -1;
+ if((XGIbios_mode[myindex].yres == 600) &&
+ (XGIhw_ext.ulCRT2LCDType != LCD_1024x600))
+ return -1;
+ break;
+ case 1152:
+ if((XGIbios_mode[myindex].yres) != 768) return -1;
+ if(XGIhw_ext.ulCRT2LCDType != LCD_1152x768) return -1;
+ break;
+ case 1280:
+ if((XGIbios_mode[myindex].yres != 768) &&
+ (XGIbios_mode[myindex].yres != 1024))
+ return -1;
+ if((XGIbios_mode[myindex].yres == 768) &&
+ (XGIhw_ext.ulCRT2LCDType != LCD_1280x768))
+ return -1;
+ break;
+ case 1400:
+ if(XGIbios_mode[myindex].yres != 1050) return -1;
+ break;
+ case 1600:
+ if(XGIbios_mode[myindex].yres != 1200) return -1;
+ break;
+ default:
+ return -1;
+ }
+ } else {
+ switch (XGIbios_mode[myindex].xres) {
+ case 512:
+ if(XGIbios_mode[myindex].yres != 512) return -1;
+ break;
+ case 640:
+ if((XGIbios_mode[myindex].yres != 400) &&
+ (XGIbios_mode[myindex].yres != 480))
+ return -1;
+ break;
+ case 800:
+ if(XGIbios_mode[myindex].yres != 600) return -1;
+ break;
+ case 1024:
+ if(XGIbios_mode[myindex].yres != 768) return -1;
+ break;
+ case 1280:
+ if((XGIbios_mode[myindex].yres != 960) &&
+ (XGIbios_mode[myindex].yres != 1024))
+ return -1;
+ if(XGIbios_mode[myindex].yres == 960) {
+ if(XGIhw_ext.ulCRT2LCDType == LCD_1400x1050)
+ return -1;
+ }
+ break;
+ case 1400:
+ if(XGIbios_mode[myindex].yres != 1050) return -1;
+ break;
+ case 1600:
+ if(XGIbios_mode[myindex].yres != 1200) return -1;
+ break;
+ default:
+ return -1;
+ }
+ }
+ break;
+ case DISPTYPE_TV:
+ switch (XGIbios_mode[myindex].xres) {
+ case 512:
+ case 640:
+ case 800:
+ break;
+ case 720:
+ if (xgi_video_info.TV_type == TVMODE_NTSC) {
+ if (XGIbios_mode[myindex].yres != 480) {
+ return(-1);
+ }
+ } else if (xgi_video_info.TV_type == TVMODE_PAL) {
+ if (XGIbios_mode[myindex].yres != 576) {
+ return(-1);
+ }
+ }
+ // TW: LVDS/CHRONTEL does not support 720
+ if (xgi_video_info.hasVB == HASVB_LVDS_CHRONTEL ||
+ xgi_video_info.hasVB == HASVB_CHRONTEL) {
+ return(-1);
+ }
+ break;
+ case 1024:
+ if (xgi_video_info.TV_type == TVMODE_NTSC) {
+ if(XGIbios_mode[myindex].bpp == 32) {
+ return(-1);
+ }
+ }
+ // TW: LVDS/CHRONTEL only supports < 800 (1024 on 650/Ch7019)
+ if (xgi_video_info.hasVB == HASVB_LVDS_CHRONTEL ||
+ xgi_video_info.hasVB == HASVB_CHRONTEL) {
+ if(xgi_video_info.chip < XGI_315H) {
+ return(-1);
+ }
+ }
+ break;
+ default:
+ return(-1);
+ }
+ break;
+ case DISPTYPE_CRT2:
+ if(XGIbios_mode[myindex].xres > 1280) return -1;
+ break;
+ }
+ return(myindex);
+
+}
+
+static void XGIfb_search_crt2type(const char *name)
+{
+ int i = 0;
+
+ if(name == NULL)
+ return;
+
+ while(XGI_crt2type[i].type_no != -1) {
+ if (!strcmp(name, XGI_crt2type[i].name)) {
+ XGIfb_crt2type = XGI_crt2type[i].type_no;
+ XGIfb_tvplug = XGI_crt2type[i].tvplug_no;
+ break;
+ }
+ i++;
+ }
+ if(XGIfb_crt2type < 0)
+ printk(KERN_INFO "XGIfb: Invalid CRT2 type: %s\n", name);
+}
+
+static void XGIfb_search_queuemode(const char *name)
+{
+ int i = 0;
+
+ if(name == NULL)
+ return;
+
+ while (XGI_queuemode[i].type_no != -1) {
+ if (!strcmp(name, XGI_queuemode[i].name)) {
+ XGIfb_queuemode = XGI_queuemode[i].type_no;
+ break;
+ }
+ i++;
+ }
+ if (XGIfb_queuemode < 0)
+ printk(KERN_INFO "XGIfb: Invalid queuemode type: %s\n", name);
+}
+
+static u8 XGIfb_search_refresh_rate(unsigned int rate)
+{
+ u16 xres, yres;
+ int i = 0;
+
+ xres = XGIbios_mode[xgifb_mode_idx].xres;
+ yres = XGIbios_mode[xgifb_mode_idx].yres;
+
+ XGIfb_rate_idx = 0;
+ while ((XGIfb_vrate[i].idx != 0) && (XGIfb_vrate[i].xres <= xres)) {
+ if ((XGIfb_vrate[i].xres == xres) && (XGIfb_vrate[i].yres == yres)) {
+ if (XGIfb_vrate[i].refresh == rate) {
+ XGIfb_rate_idx = XGIfb_vrate[i].idx;
+ break;
+ } else if (XGIfb_vrate[i].refresh > rate) {
+ if ((XGIfb_vrate[i].refresh - rate) <= 3) {
+ DPRINTK("XGIfb: Adjusting rate from %d up to %d\n",
+ rate, XGIfb_vrate[i].refresh);
+ XGIfb_rate_idx = XGIfb_vrate[i].idx;
+ xgi_video_info.refresh_rate = XGIfb_vrate[i].refresh;
+ } else if (((rate - XGIfb_vrate[i-1].refresh) <= 2)
+ && (XGIfb_vrate[i].idx != 1)) {
+ DPRINTK("XGIfb: Adjusting rate from %d down to %d\n",
+ rate, XGIfb_vrate[i-1].refresh);
+ XGIfb_rate_idx = XGIfb_vrate[i-1].idx;
+ xgi_video_info.refresh_rate = XGIfb_vrate[i-1].refresh;
+ }
+ break;
+ } else if((rate - XGIfb_vrate[i].refresh) <= 2) {
+ DPRINTK("XGIfb: Adjusting rate from %d down to %d\n",
+ rate, XGIfb_vrate[i].refresh);
+ XGIfb_rate_idx = XGIfb_vrate[i].idx;
+ break;
+ }
+ }
+ i++;
+ }
+ if (XGIfb_rate_idx > 0) {
+ return XGIfb_rate_idx;
+ } else {
+ printk(KERN_INFO
+ "XGIfb: Unsupported rate %d for %dx%d\n", rate, xres, yres);
+ return 0;
+ }
+}
+
+static void XGIfb_search_tvstd(const char *name)
+{
+ int i = 0;
+
+ if(name == NULL)
+ return;
+
+ while (XGI_tvtype[i].type_no != -1) {
+ if (!strcmp(name, XGI_tvtype[i].name)) {
+ XGIfb_tvmode = XGI_tvtype[i].type_no;
+ break;
+ }
+ i++;
+ }
+}
+
+static BOOLEAN XGIfb_bridgeisslave(void)
+{
+ unsigned char usScratchP1_00;
+
+ if(xgi_video_info.hasVB == HASVB_NONE) return FALSE;
+
+ inXGIIDXREG(XGIPART1,0x00,usScratchP1_00);
+ if( (usScratchP1_00 & 0x50) == 0x10) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+static BOOLEAN XGIfbcheckvretracecrt1(void)
+{
+ unsigned char temp;
+
+ inXGIIDXREG(XGICR,0x17,temp);
+ if(!(temp & 0x80)) return FALSE;
+
+
+ inXGIIDXREG(XGISR,0x1f,temp);
+ if(temp & 0xc0) return FALSE;
+
+
+ if(inXGIREG(XGIINPSTAT) & 0x08) return TRUE;
+ else return FALSE;
+}
+
+static BOOLEAN XGIfbcheckvretracecrt2(void)
+{
+ unsigned char temp;
+ if(xgi_video_info.hasVB == HASVB_NONE) return FALSE;
+ inXGIIDXREG(XGIPART1, 0x30, temp);
+ if(temp & 0x02) return FALSE;
+ else return TRUE;
+}
+
+static BOOLEAN XGIfb_CheckVBRetrace(void)
+{
+ if(xgi_video_info.disp_state & DISPTYPE_DISP2) {
+ if(XGIfb_bridgeisslave()) {
+ return(XGIfbcheckvretracecrt1());
+ } else {
+ return(XGIfbcheckvretracecrt2());
+ }
+ }
+ return(XGIfbcheckvretracecrt1());
+}
+
+/* ----------- FBDev related routines for all series ----------- */
+
+
+static void XGIfb_bpp_to_var(struct fb_var_screeninfo *var)
+{
+ switch(var->bits_per_pixel) {
+ case 8:
+ var->red.offset = var->green.offset = var->blue.offset = 0;
+ var->red.length = var->green.length = var->blue.length = 6;
+ xgi_video_info.video_cmap_len = 256;
+ break;
+ case 16:
+ var->red.offset = 11;
+ var->red.length = 5;
+ var->green.offset = 5;
+ var->green.length = 6;
+ var->blue.offset = 0;
+ var->blue.length = 5;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ xgi_video_info.video_cmap_len = 16;
+ break;
+ case 32:
+ var->red.offset = 16;
+ var->red.length = 8;
+ var->green.offset = 8;
+ var->green.length = 8;
+ var->blue.offset = 0;
+ var->blue.length = 8;
+ var->transp.offset = 24;
+ var->transp.length = 8;
+ xgi_video_info.video_cmap_len = 16;
+ break;
+ }
+}
+
+
+
+static int XGIfb_do_set_var(struct fb_var_screeninfo *var, int isactive,
+ struct fb_info *info)
+{
+
+ unsigned int htotal = var->left_margin + var->xres +
+ var->right_margin + var->hsync_len;
+ unsigned int vtotal = var->upper_margin + var->yres +
+ var->lower_margin + var->vsync_len;
+#if defined(__powerpc__)
+ u8 sr_data, cr_data;
+#endif
+ unsigned int drate = 0, hrate = 0;
+ int found_mode = 0;
+ int old_mode;
+// unsigned char reg,reg1;
+
+ DEBUGPRN("Inside do_set_var");
+// printk(KERN_DEBUG "XGIfb:var->yres=%d, var->upper_margin=%d, var->lower_margin=%d, var->vsync_len=%d\n", var->yres,var->upper_margin,var->lower_margin,var->vsync_len);
+
+ info->var.xres_virtual = var->xres_virtual;
+ info->var.yres_virtual = var->yres_virtual;
+ info->var.bits_per_pixel = var->bits_per_pixel;
+
+ if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_NONINTERLACED)
+ vtotal <<= 1;
+ else if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE)
+ vtotal <<= 2;
+ else if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED)
+ {
+// vtotal <<= 1;
+// var->yres <<= 1;
+ }
+
+ if(!htotal || !vtotal) {
+ DPRINTK("XGIfb: Invalid 'var' information\n");
+ return -EINVAL;
+ }
+ printk(KERN_DEBUG "XGIfb: var->pixclock=%d, htotal=%d, vtotal=%d\n",
+ var->pixclock,htotal,vtotal);
+
+
+
+ if(var->pixclock && htotal && vtotal) {
+ drate = 1000000000 / var->pixclock;
+ hrate = (drate * 1000) / htotal;
+ xgi_video_info.refresh_rate = (unsigned int) (hrate * 2 / vtotal);
+ } else {
+ xgi_video_info.refresh_rate = 60;
+ }
+
+ printk(KERN_DEBUG "XGIfb: Change mode to %dx%dx%d-%dHz\n",
+ var->xres,var->yres,var->bits_per_pixel,xgi_video_info.refresh_rate);
+
+ old_mode = xgifb_mode_idx;
+ xgifb_mode_idx = 0;
+
+ while( (XGIbios_mode[xgifb_mode_idx].mode_no != 0) &&
+ (XGIbios_mode[xgifb_mode_idx].xres <= var->xres) ) {
+ if( (XGIbios_mode[xgifb_mode_idx].xres == var->xres) &&
+ (XGIbios_mode[xgifb_mode_idx].yres == var->yres) &&
+ (XGIbios_mode[xgifb_mode_idx].bpp == var->bits_per_pixel)) {
+ XGIfb_mode_no = XGIbios_mode[xgifb_mode_idx].mode_no;
+ found_mode = 1;
+ break;
+ }
+ xgifb_mode_idx++;
+ }
+
+ if(found_mode)
+ xgifb_mode_idx = XGIfb_validate_mode(xgifb_mode_idx);
+ else
+ xgifb_mode_idx = -1;
+
+ if(xgifb_mode_idx < 0) {
+ printk(KERN_ERR "XGIfb: Mode %dx%dx%d not supported\n", var->xres,
+ var->yres, var->bits_per_pixel);
+ xgifb_mode_idx = old_mode;
+ return -EINVAL;
+ }
+
+ if(XGIfb_search_refresh_rate(xgi_video_info.refresh_rate) == 0) {
+ XGIfb_rate_idx = XGIbios_mode[xgifb_mode_idx].rate_idx;
+ xgi_video_info.refresh_rate = 60;
+ }
+
+ if(isactive) {
+
+
+ XGIfb_pre_setmode();
+ if(XGISetModeNew( &XGIhw_ext, XGIfb_mode_no) == 0) {
+ printk(KERN_ERR "XGIfb: Setting mode[0x%x] failed\n", XGIfb_mode_no);
+ return -EINVAL;
+ }
+ info->fix.line_length = ((info->var.xres_virtual * info->var.bits_per_pixel)>>6);
+
+ outXGIIDXREG(XGISR,IND_XGI_PASSWORD,XGI_PASSWORD);
+
+ outXGIIDXREG(XGICR,0x13,(info->fix.line_length & 0x00ff));
+ outXGIIDXREG(XGISR,0x0E,(info->fix.line_length & 0xff00)>>8);
+
+ XGIfb_post_setmode();
+
+ DPRINTK("XGIfb: Set new mode: %dx%dx%d-%d \n",
+ XGIbios_mode[xgifb_mode_idx].xres,
+ XGIbios_mode[xgifb_mode_idx].yres,
+ XGIbios_mode[xgifb_mode_idx].bpp,
+ xgi_video_info.refresh_rate);
+
+ xgi_video_info.video_bpp = XGIbios_mode[xgifb_mode_idx].bpp;
+ xgi_video_info.video_vwidth = info->var.xres_virtual;
+ xgi_video_info.video_width = XGIbios_mode[xgifb_mode_idx].xres;
+ xgi_video_info.video_vheight = info->var.yres_virtual;
+ xgi_video_info.video_height = XGIbios_mode[xgifb_mode_idx].yres;
+ xgi_video_info.org_x = xgi_video_info.org_y = 0;
+ xgi_video_info.video_linelength = info->var.xres_virtual * (xgi_video_info.video_bpp >> 3);
+ xgi_video_info.accel = 0;
+ if(XGIfb_accel) {
+ xgi_video_info.accel = (var->accel_flags & FB_ACCELF_TEXT) ? -1 : 0;
+ }
+ switch(xgi_video_info.video_bpp)
+ {
+ case 8:
+ xgi_video_info.DstColor = 0x0000;
+ xgi_video_info.XGI310_AccelDepth = 0x00000000;
+ xgi_video_info.video_cmap_len = 256;
+#if defined(__powerpc__)
+ inXGIIDXREG (XGICR, 0x4D, cr_data);
+ outXGIIDXREG(XGICR, 0x4D, (cr_data & 0xE0));
+#endif
+ break;
+ case 16:
+ xgi_video_info.DstColor = 0x8000;
+ xgi_video_info.XGI310_AccelDepth = 0x00010000;
+#if defined(__powerpc__)
+ inXGIIDXREG (XGICR, 0x4D, cr_data);
+ outXGIIDXREG(XGICR, 0x4D, ((cr_data & 0xE0) | 0x0B));
+#endif
+ xgi_video_info.video_cmap_len = 16;
+ break;
+ case 32:
+ xgi_video_info.DstColor = 0xC000;
+ xgi_video_info.XGI310_AccelDepth = 0x00020000;
+ xgi_video_info.video_cmap_len = 16;
+#if defined(__powerpc__)
+ inXGIIDXREG (XGICR, 0x4D, cr_data);
+ outXGIIDXREG(XGICR, 0x4D, ((cr_data & 0xE0) | 0x15));
+#endif
+ break;
+ default:
+ xgi_video_info.video_cmap_len = 16;
+ printk(KERN_ERR "XGIfb: Unsupported depth %d", xgi_video_info.video_bpp);
+ xgi_video_info.accel = 0;
+ break;
+ }
+ }
+ XGIfb_bpp_to_var(var); /*update ARGB info*/
+ DEBUGPRN("End of do_set_var");
+
+ dumpVGAReg();
+ return 0;
+}
+
+#ifdef XGIFB_PAN
+static int XGIfb_pan_var(struct fb_var_screeninfo *var)
+{
+ unsigned int base;
+
+// printk("Inside pan_var");
+
+ if (var->xoffset > (var->xres_virtual - var->xres)) {
+// printk( "Pan: xo: %d xv %d xr %d\n",
+// var->xoffset, var->xres_virtual, var->xres);
+ return -EINVAL;
+ }
+ if(var->yoffset > (var->yres_virtual - var->yres)) {
+// printk( "Pan: yo: %d yv %d yr %d\n",
+// var->yoffset, var->yres_virtual, var->yres);
+ return -EINVAL;
+ }
+ base = var->yoffset * var->xres_virtual + var->xoffset;
+
+ /* calculate base bpp dep. */
+ switch(var->bits_per_pixel) {
+ case 16:
+ base >>= 1;
+ break;
+ case 32:
+ break;
+ case 8:
+ default:
+ base >>= 2;
+ break;
+ }
+
+ outXGIIDXREG(XGISR, IND_XGI_PASSWORD, XGI_PASSWORD);
+
+ outXGIIDXREG(XGICR, 0x0D, base & 0xFF);
+ outXGIIDXREG(XGICR, 0x0C, (base >> 8) & 0xFF);
+ outXGIIDXREG(XGISR, 0x0D, (base >> 16) & 0xFF);
+ outXGIIDXREG(XGISR, 0x37, (base >> 24) & 0x03);
+ setXGIIDXREG(XGISR, 0x37, 0xDF, (base >> 21) & 0x04);
+
+ if(xgi_video_info.disp_state & DISPTYPE_DISP2) {
+ orXGIIDXREG(XGIPART1, XGIfb_CRT2_write_enable, 0x01);
+ outXGIIDXREG(XGIPART1, 0x06, (base & 0xFF));
+ outXGIIDXREG(XGIPART1, 0x05, ((base >> 8) & 0xFF));
+ outXGIIDXREG(XGIPART1, 0x04, ((base >> 16) & 0xFF));
+ setXGIIDXREG(XGIPART1, 0x02, 0x7F, ((base >> 24) & 0x01) << 7);
+ }
+// printk("End of pan_var");
+ return 0;
+}
+#endif
+
+
+void XGI_dispinfo(struct ap_data *rec)
+{
+ rec->minfo.bpp = xgi_video_info.video_bpp;
+ rec->minfo.xres = xgi_video_info.video_width;
+ rec->minfo.yres = xgi_video_info.video_height;
+ rec->minfo.v_xres = xgi_video_info.video_vwidth;
+ rec->minfo.v_yres = xgi_video_info.video_vheight;
+ rec->minfo.org_x = xgi_video_info.org_x;
+ rec->minfo.org_y = xgi_video_info.org_y;
+ rec->minfo.vrate = xgi_video_info.refresh_rate;
+ rec->iobase = xgi_video_info.vga_base - 0x30;
+ rec->mem_size = xgi_video_info.video_size;
+ rec->disp_state = xgi_video_info.disp_state;
+ rec->version = (VER_MAJOR << 24) | (VER_MINOR << 16) | VER_LEVEL;
+ rec->hasVB = xgi_video_info.hasVB;
+ rec->TV_type = xgi_video_info.TV_type;
+ rec->TV_plug = xgi_video_info.TV_plug;
+ rec->chip = xgi_video_info.chip;
+}
+
+
+
+
+static int XGIfb_open(struct fb_info *info, int user)
+{
+ return 0;
+}
+
+static int XGIfb_release(struct fb_info *info, int user)
+{
+ return 0;
+}
+
+static int XGIfb_get_cmap_len(const struct fb_var_screeninfo *var)
+{
+ int rc = 16;
+
+ switch(var->bits_per_pixel) {
+ case 8:
+ rc = 256;
+ break;
+ case 16:
+ rc = 16;
+ break;
+ case 32:
+ rc = 16;
+ break;
+ }
+ return rc;
+}
+
+static int XGIfb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue,
+ unsigned transp, struct fb_info *info)
+{
+ if (regno >= XGIfb_get_cmap_len(&info->var))
+ return 1;
+
+ switch (info->var.bits_per_pixel) {
+ case 8:
+ outXGIREG(XGIDACA, regno);
+ outXGIREG(XGIDACD, (red >> 10));
+ outXGIREG(XGIDACD, (green >> 10));
+ outXGIREG(XGIDACD, (blue >> 10));
+ if (xgi_video_info.disp_state & DISPTYPE_DISP2) {
+ outXGIREG(XGIDAC2A, regno);
+ outXGIREG(XGIDAC2D, (red >> 8));
+ outXGIREG(XGIDAC2D, (green >> 8));
+ outXGIREG(XGIDAC2D, (blue >> 8));
+ }
+ break;
+ case 16:
+ ((u32 *)(info->pseudo_palette))[regno] =
+ ((red & 0xf800)) | ((green & 0xfc00) >> 5) | ((blue & 0xf800) >> 11);
+ break;
+ case 32:
+ red >>= 8;
+ green >>= 8;
+ blue >>= 8;
+ ((u32 *) (info->pseudo_palette))[regno] =
+ (red << 16) | (green << 8) | (blue);
+ break;
+ }
+ return 0;
+}
+
+static int XGIfb_set_par(struct fb_info *info)
+{
+ int err;
+
+// printk("XGIfb: inside set_par\n");
+ if((err = XGIfb_do_set_var(&info->var, 1, info)))
+ return err;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+ XGIfb_get_fix(&info->fix, info->currcon, info);
+#else
+ XGIfb_get_fix(&info->fix, -1, info);
+#endif
+// printk("XGIfb:end of set_par\n");
+ return 0;
+}
+
+static int XGIfb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ unsigned int htotal =
+ var->left_margin + var->xres + var->right_margin +
+ var->hsync_len;
+ unsigned int vtotal = 0;
+ unsigned int drate = 0, hrate = 0;
+ int found_mode = 0;
+ int refresh_rate, search_idx;
+
+ DEBUGPRN("Inside check_var");
+
+ if((var->vmode & FB_VMODE_MASK) == FB_VMODE_NONINTERLACED) {
+ vtotal = var->upper_margin + var->yres + var->lower_margin +
+ var->vsync_len;
+ vtotal <<= 1;
+ } else if((var->vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE) {
+ vtotal = var->upper_margin + var->yres + var->lower_margin +
+ var->vsync_len;
+ vtotal <<= 2;
+ } else if((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) {
+ vtotal = var->upper_margin + (var->yres/2) + var->lower_margin +
+ var->vsync_len;
+ } else vtotal = var->upper_margin + var->yres + var->lower_margin +
+ var->vsync_len;
+
+ if(!(htotal) || !(vtotal)) {
+ XGIFAIL("XGIfb: no valid timing data");
+ }
+
+
+ if(var->pixclock && htotal && vtotal) {
+ drate = 1000000000 / var->pixclock;
+ hrate = (drate * 1000) / htotal;
+ xgi_video_info.refresh_rate = (unsigned int) (hrate * 2 / vtotal);
+ printk(KERN_DEBUG \
+ "%s: pixclock = %d ,htotal=%d, vtotal=%d\n" \
+ "%s: drate=%d, hrate=%d, refresh_rate=%d\n",
+ __func__,var->pixclock, htotal, vtotal,
+ __func__, drate, hrate, xgi_video_info.refresh_rate);
+ } else {
+ xgi_video_info.refresh_rate = 60;
+ }
+
+/*
+ if((var->pixclock) && (htotal)) {
+ drate = 1E12 / var->pixclock;
+ hrate = drate / htotal;
+ refresh_rate = (unsigned int) (hrate / vtotal * 2 + 0.5);
+ } else refresh_rate = 60;
+*/
+ /* TW: Calculation wrong for 1024x600 - force it to 60Hz */
+ if((var->xres == 1024) && (var->yres == 600)) refresh_rate = 60;
+
+ search_idx = 0;
+ while((XGIbios_mode[search_idx].mode_no != 0) &&
+ (XGIbios_mode[search_idx].xres <= var->xres) ) {
+ if((XGIbios_mode[search_idx].xres == var->xres) &&
+ (XGIbios_mode[search_idx].yres == var->yres) &&
+ (XGIbios_mode[search_idx].bpp == var->bits_per_pixel)) {
+ if(XGIfb_validate_mode(search_idx) > 0) {
+ found_mode = 1;
+ break;
+ }
+ }
+ search_idx++;
+ }
+
+ if(!found_mode) {
+
+ printk(KERN_ERR "XGIfb: %dx%dx%d is no valid mode\n",
+ var->xres, var->yres, var->bits_per_pixel);
+
+ search_idx = 0;
+ while(XGIbios_mode[search_idx].mode_no != 0) {
+
+ if( (var->xres <= XGIbios_mode[search_idx].xres) &&
+ (var->yres <= XGIbios_mode[search_idx].yres) &&
+ (var->bits_per_pixel == XGIbios_mode[search_idx].bpp) ) {
+ if(XGIfb_validate_mode(search_idx) > 0) {
+ found_mode = 1;
+ break;
+ }
+ }
+ search_idx++;
+ }
+ if(found_mode) {
+ var->xres = XGIbios_mode[search_idx].xres;
+ var->yres = XGIbios_mode[search_idx].yres;
+ printk(KERN_DEBUG "XGIfb: Adapted to mode %dx%dx%d\n",
+ var->xres, var->yres, var->bits_per_pixel);
+
+ } else {
+ printk(KERN_ERR "XGIfb: Failed to find similar mode to %dx%dx%d\n",
+ var->xres, var->yres, var->bits_per_pixel);
+ return -EINVAL;
+ }
+ }
+
+ /* TW: TODO: Check the refresh rate */
+
+ /* Adapt RGB settings */
+ XGIfb_bpp_to_var(var);
+
+ /* Sanity check for offsets */
+ if (var->xoffset < 0)
+ var->xoffset = 0;
+ if (var->yoffset < 0)
+ var->yoffset = 0;
+
+
+ if(!XGIfb_ypan) {
+ if(var->xres != var->xres_virtual)
+ var->xres_virtual = var->xres;
+ if(var->yres != var->yres_virtual)
+ var->yres_virtual = var->yres;
+ }/* else {
+ // TW: Now patch yres_virtual if we use panning
+ // May I do this?
+ var->yres_virtual = xgi_video_info.heapstart / (var->xres * (var->bits_per_pixel >> 3));
+ if(var->yres_virtual <= var->yres) {
+ // TW: Paranoia check
+ var->yres_virtual = var->yres;
+ }
+ }*/
+
+ /* Truncate offsets to maximum if too high */
+ if (var->xoffset > var->xres_virtual - var->xres)
+ var->xoffset = var->xres_virtual - var->xres - 1;
+
+ if (var->yoffset > var->yres_virtual - var->yres)
+ var->yoffset = var->yres_virtual - var->yres - 1;
+
+ /* Set everything else to 0 */
+ var->red.msb_right =
+ var->green.msb_right =
+ var->blue.msb_right =
+ var->transp.offset = var->transp.length = var->transp.msb_right = 0;
+
+ DEBUGPRN("end of check_var");
+ return 0;
+}
+
+#ifdef XGIFB_PAN
+static int XGIfb_pan_display( struct fb_var_screeninfo *var,
+ struct fb_info* info)
+{
+ int err;
+
+// printk("\nInside pan_display:");
+
+ if (var->xoffset > (var->xres_virtual - var->xres))
+ return -EINVAL;
+ if (var->yoffset > (var->yres_virtual - var->yres))
+ return -EINVAL;
+
+ if (var->vmode & FB_VMODE_YWRAP) {
+ if (var->yoffset < 0
+ || var->yoffset >= info->var.yres_virtual
+ || var->xoffset) return -EINVAL;
+ } else {
+ if (var->xoffset + info->var.xres > info->var.xres_virtual ||
+ var->yoffset + info->var.yres > info->var.yres_virtual)
+ return -EINVAL;
+ }
+
+ if((err = XGIfb_pan_var(var)) < 0) return err;
+
+ info->var.xoffset = var->xoffset;
+ info->var.yoffset = var->yoffset;
+ if (var->vmode & FB_VMODE_YWRAP)
+ info->var.vmode |= FB_VMODE_YWRAP;
+ else
+ info->var.vmode &= ~FB_VMODE_YWRAP;
+
+// printk(" End of pan_display");
+ return 0;
+}
+#endif
+
+#if 0
+static int XGIfb_mmap(struct fb_info *info, struct file *file,
+ struct vm_area_struct *vma)
+{
+ unsigned long start;
+ unsigned long off;
+ u32 len, mmio_off;
+
+ DEBUGPRN("inside mmap");
+ if(vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) return -EINVAL;
+
+ off = vma->vm_pgoff << PAGE_SHIFT;
+
+ start = (unsigned long) xgi_video_info.video_base;
+ len = PAGE_ALIGN((start & ~PAGE_MASK) + xgi_video_info.video_size);
+ start &= PAGE_MASK;
+#if 0
+ if (off >= len) {
+ off -= len;
+#endif
+ /* By Jake Page: Treat mmap request with offset beyond heapstart
+ * as request for mapping the mmio area
+ */
+ #if 1
+ mmio_off = PAGE_ALIGN((start & ~PAGE_MASK) + xgi_video_info.heapstart);
+ if(off >= mmio_off) {
+ off -= mmio_off;
+ if(info->var.accel_flags) return -EINVAL;
+
+ start = (unsigned long) xgi_video_info.mmio_base;
+ len = PAGE_ALIGN((start & ~PAGE_MASK) + XGIfb_mmio_size);
+ }
+ start &= PAGE_MASK;
+ #endif
+ if((vma->vm_end - vma->vm_start + off) > len) return -EINVAL;
+
+ off += start;
+ vma->vm_pgoff = off >> PAGE_SHIFT;
+ vma->vm_flags |= VM_IO; /* by Jake Page; is that really needed? */
+
+#if defined(__i386__) || defined(__x86_64__)
+ if (boot_cpu_data.x86 > 3)
+ pgprot_val(vma->vm_page_prot) |= _PAGE_PCD;
+#endif
+ if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, vma->vm_end - vma->vm_start,
+ vma->vm_page_prot))
+ return -EAGAIN;
+
+ DEBUGPRN("end of mmap");
+ return 0;
+}
+#endif
+static int XGIfb_blank(int blank, struct fb_info *info)
+{
+ u8 reg;
+
+ inXGIIDXREG(XGICR, 0x17, reg);
+
+ if(blank > 0)
+ reg &= 0x7f;
+ else
+ reg |= 0x80;
+
+ outXGIIDXREG(XGICR, 0x17, reg);
+ outXGIIDXREG(XGISR, 0x00, 0x01); /* Synchronous Reset */
+ outXGIIDXREG(XGISR, 0x00, 0x03); /* End Reset */
+ return(0);
+}
+
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15)
+static int XGIfb_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg)
+#else
+static int XGIfb_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg,
+ struct fb_info *info)
+#endif
+
+{
+ DEBUGPRN("inside ioctl");
+ switch (cmd) {
+ case FBIO_ALLOC:
+ if (!capable(CAP_SYS_RAWIO))
+ return -EPERM;
+ XGI_malloc((struct XGI_memreq *) arg);
+ break;
+ case FBIO_FREE:
+ if (!capable(CAP_SYS_RAWIO))
+ return -EPERM;
+ XGI_free(*(unsigned long *) arg);
+ break;
+ case FBIOGET_HWCINFO:
+ {
+ unsigned long *hwc_offset = (unsigned long *) arg;
+
+ if (XGIfb_caps & HW_CURSOR_CAP)
+ *hwc_offset = XGIfb_hwcursor_vbase -
+ (unsigned long) xgi_video_info.video_vbase;
+ else
+ *hwc_offset = 0;
+
+ break;
+ }
+ case FBIOPUT_MODEINFO:
+ {
+ struct mode_info *x = (struct mode_info *)arg;
+
+ xgi_video_info.video_bpp = x->bpp;
+ xgi_video_info.video_width = x->xres;
+ xgi_video_info.video_height = x->yres;
+ xgi_video_info.video_vwidth = x->v_xres;
+ xgi_video_info.video_vheight = x->v_yres;
+ xgi_video_info.org_x = x->org_x;
+ xgi_video_info.org_y = x->org_y;
+ xgi_video_info.refresh_rate = x->vrate;
+ xgi_video_info.video_linelength = xgi_video_info.video_vwidth * (xgi_video_info.video_bpp >> 3);
+ switch(xgi_video_info.video_bpp) {
+ case 8:
+ xgi_video_info.DstColor = 0x0000;
+ xgi_video_info.XGI310_AccelDepth = 0x00000000;
+ xgi_video_info.video_cmap_len = 256;
+ break;
+ case 16:
+ xgi_video_info.DstColor = 0x8000;
+ xgi_video_info.XGI310_AccelDepth = 0x00010000;
+ xgi_video_info.video_cmap_len = 16;
+ break;
+ case 32:
+ xgi_video_info.DstColor = 0xC000;
+ xgi_video_info.XGI310_AccelDepth = 0x00020000;
+ xgi_video_info.video_cmap_len = 16;
+ break;
+ default:
+ xgi_video_info.video_cmap_len = 16;
+ printk(KERN_ERR "XGIfb: Unsupported accel depth %d", xgi_video_info.video_bpp);
+ xgi_video_info.accel = 0;
+ break;
+ }
+
+ break;
+ }
+ case FBIOGET_DISPINFO:
+ XGI_dispinfo((struct ap_data *)arg);
+ break;
+ case XGIFB_GET_INFO: /* TW: New for communication with X driver */
+ {
+ XGIfb_info *x = (XGIfb_info *)arg;
+
+ //x->XGIfb_id = XGIFB_ID;
+ x->XGIfb_version = VER_MAJOR;
+ x->XGIfb_revision = VER_MINOR;
+ x->XGIfb_patchlevel = VER_LEVEL;
+ x->chip_id = xgi_video_info.chip_id;
+ x->memory = xgi_video_info.video_size / 1024;
+ x->heapstart = xgi_video_info.heapstart / 1024;
+ x->fbvidmode = XGIfb_mode_no;
+ x->XGIfb_caps = XGIfb_caps;
+ x->XGIfb_tqlen = 512; /* yet unused */
+ x->XGIfb_pcibus = xgi_video_info.pcibus;
+ x->XGIfb_pcislot = xgi_video_info.pcislot;
+ x->XGIfb_pcifunc = xgi_video_info.pcifunc;
+ x->XGIfb_lcdpdc = XGIfb_detectedpdc;
+ x->XGIfb_lcda = XGIfb_detectedlcda;
+ break;
+ }
+ case XGIFB_GET_VBRSTATUS:
+ {
+ unsigned long *vbrstatus = (unsigned long *) arg;
+ if(XGIfb_CheckVBRetrace()) *vbrstatus = 1;
+ else *vbrstatus = 0;
+ }
+ default:
+ return -EINVAL;
+ }
+ DEBUGPRN("end of ioctl");
+ return 0;
+
+}
+
+
+
+/* ----------- FBDev related routines for all series ---------- */
+
+static int XGIfb_get_fix(struct fb_fix_screeninfo *fix, int con,
+ struct fb_info *info)
+{
+ DEBUGPRN("inside get_fix");
+ memset(fix, 0, sizeof(struct fb_fix_screeninfo));
+
+ strcpy(fix->id, myid);
+
+ fix->smem_start = xgi_video_info.video_base;
+
+ fix->smem_len = xgi_video_info.video_size;
+
+
+/* if((!XGIfb_mem) || (XGIfb_mem > (xgi_video_info.video_size/1024))) {
+ if (xgi_video_info.video_size > 0x1000000) {
+ fix->smem_len = 0xD00000;
+ } else if (xgi_video_info.video_size > 0x800000)
+ fix->smem_len = 0x800000;
+ else
+ fix->smem_len = 0x400000;
+ } else
+ fix->smem_len = XGIfb_mem * 1024;
+*/
+ fix->type = video_type;
+ fix->type_aux = 0;
+ if(xgi_video_info.video_bpp == 8)
+ fix->visual = FB_VISUAL_PSEUDOCOLOR;
+ else
+ fix->visual = FB_VISUAL_DIRECTCOLOR;
+ fix->xpanstep = 0;
+#ifdef XGIFB_PAN
+ if(XGIfb_ypan) fix->ypanstep = 1;
+#endif
+ fix->ywrapstep = 0;
+ fix->line_length = xgi_video_info.video_linelength;
+ fix->mmio_start = xgi_video_info.mmio_base;
+ fix->mmio_len = XGIfb_mmio_size;
+ if(xgi_video_info.chip >= XG40)
+ fix->accel = FB_ACCEL_XGI_XABRE;
+ else
+ fix->accel = FB_ACCEL_XGI_GLAMOUR_2;
+
+
+ DEBUGPRN("end of get_fix");
+ return 0;
+}
+
+
+static struct fb_ops XGIfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_open = XGIfb_open,
+ .fb_release = XGIfb_release,
+ .fb_check_var = XGIfb_check_var,
+ .fb_set_par = XGIfb_set_par,
+ .fb_setcolreg = XGIfb_setcolreg,
+#ifdef XGIFB_PAN
+ .fb_pan_display = XGIfb_pan_display,
+#endif
+ .fb_blank = XGIfb_blank,
+ .fb_fillrect = fbcon_XGI_fillrect,
+ .fb_copyarea = fbcon_XGI_copyarea,
+ .fb_imageblit = cfb_imageblit,
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15)
+ .fb_cursor = soft_cursor,
+#endif
+ .fb_sync = fbcon_XGI_sync,
+ .fb_ioctl = XGIfb_ioctl,
+// .fb_mmap = XGIfb_mmap,
+};
+
+/* ---------------- Chip generation dependent routines ---------------- */
+
+
+/* for XGI 315/550/650/740/330 */
+
+static int XGIfb_get_dram_size(void)
+{
+
+ u8 ChannelNum,tmp;
+ u8 reg = 0;
+
+ /* xorg driver sets 32MB * 1 channel */
+ if (xgi_video_info.chip == XG27)
+ outXGIIDXREG(XGISR, IND_XGI_DRAM_SIZE, 0x51);
+
+ inXGIIDXREG(XGISR, IND_XGI_DRAM_SIZE, reg);
+ switch ((reg & XGI_DRAM_SIZE_MASK) >> 4) {
+ case XGI_DRAM_SIZE_1MB:
+ xgi_video_info.video_size = 0x100000;
+ break;
+ case XGI_DRAM_SIZE_2MB:
+ xgi_video_info.video_size = 0x200000;
+ break;
+ case XGI_DRAM_SIZE_4MB:
+ xgi_video_info.video_size = 0x400000;
+ break;
+ case XGI_DRAM_SIZE_8MB:
+ xgi_video_info.video_size = 0x800000;
+ break;
+ case XGI_DRAM_SIZE_16MB:
+ xgi_video_info.video_size = 0x1000000;
+ break;
+ case XGI_DRAM_SIZE_32MB:
+ xgi_video_info.video_size = 0x2000000;
+ break;
+ case XGI_DRAM_SIZE_64MB:
+ xgi_video_info.video_size = 0x4000000;
+ break;
+ case XGI_DRAM_SIZE_128MB:
+ xgi_video_info.video_size = 0x8000000;
+ break;
+ case XGI_DRAM_SIZE_256MB:
+ xgi_video_info.video_size = 0x10000000;
+ break;
+ default:
+ return -1;
+ }
+
+ tmp = (reg & 0x0c) >> 2;
+ switch(xgi_video_info.chip)
+ {
+ case XG20:
+ case XG21:
+ case XG27:
+ ChannelNum = 1;
+ break;
+
+ case XG42:
+ if(reg & 0x04)
+ ChannelNum = 2;
+ else
+ ChannelNum = 1;
+ break;
+
+ case XG45:
+ if(tmp == 1)
+ ChannelNum = 2;
+ else
+ if(tmp == 2)
+ ChannelNum = 3;
+ else
+ if(tmp == 3)
+ ChannelNum = 4;
+ else
+ ChannelNum = 1;
+ break;
+
+ case XG40:
+ default:
+ if(tmp == 2)
+ ChannelNum = 2;
+ else
+ if(tmp == 3)
+ ChannelNum = 3;
+ else
+ ChannelNum = 1;
+ break;
+ }
+
+
+ xgi_video_info.video_size = xgi_video_info.video_size * ChannelNum;
+ //PLiad fixed for benchmarking and fb set
+ //xgi_video_info.video_size = 0x200000;//1024x768x16
+ //xgi_video_info.video_size = 0x1000000;//benchmark
+
+ printk("XGIfb: SR14=%x DramSzie %x ChannelNum %x\n",reg,xgi_video_info.video_size ,ChannelNum );
+ return 0;
+
+}
+
+static void XGIfb_detect_VB(void)
+{
+ u8 cr32, temp=0;
+
+ xgi_video_info.TV_plug = xgi_video_info.TV_type = 0;
+
+ switch(xgi_video_info.hasVB) {
+ case HASVB_LVDS_CHRONTEL:
+ case HASVB_CHRONTEL:
+ break;
+ case HASVB_301:
+ case HASVB_302:
+// XGI_Sense30x(); //Yi-Lin TV Sense?
+ break;
+ }
+
+ inXGIIDXREG(XGICR, IND_XGI_SCRATCH_REG_CR32, cr32);
+
+ if ((cr32 & XGI_CRT1) && !XGIfb_crt1off)
+ XGIfb_crt1off = 0;
+ else {
+ if (cr32 & 0x5F)
+ XGIfb_crt1off = 1;
+ else
+ XGIfb_crt1off = 0;
+ }
+
+ if (XGIfb_crt2type != -1)
+ /* TW: Override with option */
+ xgi_video_info.disp_state = XGIfb_crt2type;
+ else if (cr32 & XGI_VB_TV)
+ xgi_video_info.disp_state = DISPTYPE_TV;
+ else if (cr32 & XGI_VB_LCD)
+ xgi_video_info.disp_state = DISPTYPE_LCD;
+ else if (cr32 & XGI_VB_CRT2)
+ xgi_video_info.disp_state = DISPTYPE_CRT2;
+ else
+ xgi_video_info.disp_state = 0;
+
+ if(XGIfb_tvplug != -1)
+ /* PR/TW: Override with option */
+ xgi_video_info.TV_plug = XGIfb_tvplug;
+ else if (cr32 & XGI_VB_HIVISION) {
+ xgi_video_info.TV_type = TVMODE_HIVISION;
+ xgi_video_info.TV_plug = TVPLUG_SVIDEO;
+ }
+ else if (cr32 & XGI_VB_SVIDEO)
+ xgi_video_info.TV_plug = TVPLUG_SVIDEO;
+ else if (cr32 & XGI_VB_COMPOSITE)
+ xgi_video_info.TV_plug = TVPLUG_COMPOSITE;
+ else if (cr32 & XGI_VB_SCART)
+ xgi_video_info.TV_plug = TVPLUG_SCART;
+
+ if(xgi_video_info.TV_type == 0) {
+ /* TW: PAL/NTSC changed for 650 */
+ if((xgi_video_info.chip <= XGI_315PRO) || (xgi_video_info.chip >= XGI_330)) {
+
+ inXGIIDXREG(XGICR, 0x38, temp);
+ if(temp & 0x10)
+ xgi_video_info.TV_type = TVMODE_PAL;
+ else
+ xgi_video_info.TV_type = TVMODE_NTSC;
+
+ } else {
+
+ inXGIIDXREG(XGICR, 0x79, temp);
+ if(temp & 0x20)
+ xgi_video_info.TV_type = TVMODE_PAL;
+ else
+ xgi_video_info.TV_type = TVMODE_NTSC;
+ }
+ }
+
+ /* TW: Copy forceCRT1 option to CRT1off if option is given */
+ if (XGIfb_forcecrt1 != -1) {
+ if (XGIfb_forcecrt1) XGIfb_crt1off = 0;
+ else XGIfb_crt1off = 1;
+ }
+}
+
+static void XGIfb_get_VB_type(void)
+{
+ u8 reg;
+
+ if (!XGIfb_has_VB()) {
+ inXGIIDXREG(XGICR, IND_XGI_SCRATCH_REG_CR37, reg);
+ switch ((reg & XGI_EXTERNAL_CHIP_MASK) >> 1) {
+ case XGI310_EXTERNAL_CHIP_LVDS:
+ xgi_video_info.hasVB = HASVB_LVDS;
+ break;
+ case XGI310_EXTERNAL_CHIP_LVDS_CHRONTEL:
+ xgi_video_info.hasVB = HASVB_LVDS_CHRONTEL;
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+
+static int XGIfb_has_VB(void)
+{
+ u8 vb_chipid;
+
+ inXGIIDXREG(XGIPART4, 0x00, vb_chipid);
+ switch (vb_chipid) {
+ case 0x01:
+ xgi_video_info.hasVB = HASVB_301;
+ break;
+ case 0x02:
+ xgi_video_info.hasVB = HASVB_302;
+ break;
+ default:
+ xgi_video_info.hasVB = HASVB_NONE;
+ return FALSE;
+ }
+ return TRUE;
+}
+
+
+
+/* ------------------ Sensing routines ------------------ */
+
+/* TW: Determine and detect attached devices on XGI30x */
+int
+XGIDoSense(int tempbl, int tempbh, int tempcl, int tempch)
+{
+ int temp,i;
+
+ outXGIIDXREG(XGIPART4,0x11,tempbl);
+ temp = tempbh | tempcl;
+ setXGIIDXREG(XGIPART4,0x10,0xe0,temp);
+ for(i=0; i<10; i++) XGI_LongWait(&XGI_Pr);
+ tempch &= 0x7f;
+ inXGIIDXREG(XGIPART4,0x03,temp);
+ temp ^= 0x0e;
+ temp &= tempch;
+ return(temp);
+}
+
+void
+XGI_Sense30x(void)
+{
+ u8 backupP4_0d;
+ u8 testsvhs_tempbl, testsvhs_tempbh;
+ u8 testsvhs_tempcl, testsvhs_tempch;
+ u8 testcvbs_tempbl, testcvbs_tempbh;
+ u8 testcvbs_tempcl, testcvbs_tempch;
+ u8 testvga2_tempbl, testvga2_tempbh;
+ u8 testvga2_tempcl, testvga2_tempch;
+ int myflag, result;
+
+ inXGIIDXREG(XGIPART4,0x0d,backupP4_0d);
+ outXGIIDXREG(XGIPART4,0x0d,(backupP4_0d | 0x04));
+
+
+
+ testvga2_tempbh = 0x00; testvga2_tempbl = 0xd1;
+ testsvhs_tempbh = 0x00; testsvhs_tempbl = 0xb9;
+ testcvbs_tempbh = 0x00; testcvbs_tempbl = 0xb3;
+ if((XGIhw_ext.ujVBChipID != VB_CHIP_301) &&
+ (XGIhw_ext.ujVBChipID != VB_CHIP_302)) {
+ testvga2_tempbh = 0x01; testvga2_tempbl = 0x90;
+ testsvhs_tempbh = 0x01; testsvhs_tempbl = 0x6b;
+ testcvbs_tempbh = 0x01; testcvbs_tempbl = 0x74;
+ if(XGIhw_ext.ujVBChipID == VB_CHIP_301LV ||
+ XGIhw_ext.ujVBChipID == VB_CHIP_302LV) {
+ testvga2_tempbh = 0x00; testvga2_tempbl = 0x00;
+ testsvhs_tempbh = 0x02; testsvhs_tempbl = 0x00;
+ testcvbs_tempbh = 0x01; testcvbs_tempbl = 0x00;
+ }
+ }
+ if(XGIhw_ext.ujVBChipID != VB_CHIP_301LV &&
+ XGIhw_ext.ujVBChipID != VB_CHIP_302LV) {
+ inXGIIDXREG(XGIPART4,0x01,myflag);
+ if(myflag & 0x04) {
+ testvga2_tempbh = 0x00; testvga2_tempbl = 0xfd;
+ testsvhs_tempbh = 0x00; testsvhs_tempbl = 0xdd;
+ testcvbs_tempbh = 0x00; testcvbs_tempbl = 0xee;
+ }
+ }
+ if((XGIhw_ext.ujVBChipID == VB_CHIP_301LV) ||
+ (XGIhw_ext.ujVBChipID == VB_CHIP_302LV) ) {
+ testvga2_tempbh = 0x00; testvga2_tempbl = 0x00;
+ testvga2_tempch = 0x00; testvga2_tempcl = 0x00;
+ testsvhs_tempch = 0x04; testsvhs_tempcl = 0x08;
+ testcvbs_tempch = 0x08; testcvbs_tempcl = 0x08;
+ } else {
+ testvga2_tempch = 0x0e; testvga2_tempcl = 0x08;
+ testsvhs_tempch = 0x06; testsvhs_tempcl = 0x04;
+ testcvbs_tempch = 0x08; testcvbs_tempcl = 0x04;
+ }
+
+
+ if(testvga2_tempch || testvga2_tempcl || testvga2_tempbh || testvga2_tempbl) {
+ result = XGIDoSense(testvga2_tempbl, testvga2_tempbh,
+ testvga2_tempcl, testvga2_tempch);
+ if(result) {
+ printk(KERN_INFO "XGIfb: Detected secondary VGA connection\n");
+ orXGIIDXREG(XGICR, 0x32, 0x10);
+ }
+ }
+
+ result = XGIDoSense(testsvhs_tempbl, testsvhs_tempbh,
+ testsvhs_tempcl, testsvhs_tempch);
+ if(result) {
+ printk(KERN_INFO "XGIfb: Detected TV connected to SVHS output\n");
+ /* TW: So we can be sure that there IS a SVHS output */
+ xgi_video_info.TV_plug = TVPLUG_SVIDEO;
+ orXGIIDXREG(XGICR, 0x32, 0x02);
+ }
+
+ if(!result) {
+ result = XGIDoSense(testcvbs_tempbl, testcvbs_tempbh,
+ testcvbs_tempcl, testcvbs_tempch);
+ if(result) {
+ printk(KERN_INFO "XGIfb: Detected TV connected to CVBS output\n");
+ /* TW: So we can be sure that there IS a CVBS output */
+ xgi_video_info.TV_plug = TVPLUG_COMPOSITE;
+ orXGIIDXREG(XGICR, 0x32, 0x01);
+ }
+ }
+ XGIDoSense(0, 0, 0, 0);
+
+ outXGIIDXREG(XGIPART4,0x0d,backupP4_0d);
+}
+
+
+
+/* ------------------------ Heap routines -------------------------- */
+
+static int XGIfb_heap_init(void)
+{
+ XGI_OH *poh;
+ u8 temp=0;
+
+ int agp_enabled = 1;
+ u32 agp_size;
+ unsigned long *cmdq_baseport = 0;
+ unsigned long *read_port = 0;
+ unsigned long *write_port = 0;
+ XGI_CMDTYPE cmd_type;
+#ifndef AGPOFF
+ struct agp_kern_info *agp_info;
+ struct agp_memory *agp;
+ u32 agp_phys;
+#endif
+
+/* TW: The heap start is either set manually using the "mem" parameter, or
+ * defaults as follows:
+ * -) If more than 16MB videoRAM available, let our heap start at 12MB.
+ * -) If more than 8MB videoRAM available, let our heap start at 8MB.
+ * -) If 4MB or less is available, let it start at 4MB.
+ * This is for avoiding a clash with X driver which uses the beginning
+ * of the videoRAM. To limit size of X framebuffer, use Option MaxXFBMem
+ * in XF86Config-4.
+ * The heap start can also be specified by parameter "mem" when starting the XGIfb
+ * driver. XGIfb mem=1024 lets heap starts at 1MB, etc.
+ */
+ if ((!XGIfb_mem) || (XGIfb_mem > (xgi_video_info.video_size/1024))) {
+ if (xgi_video_info.video_size > 0x1000000) {
+ xgi_video_info.heapstart = 0xD00000;
+ } else if (xgi_video_info.video_size > 0x800000) {
+ xgi_video_info.heapstart = 0x800000;
+ } else {
+ xgi_video_info.heapstart = 0x400000;
+ }
+ } else {
+ xgi_video_info.heapstart = XGIfb_mem * 1024;
+ }
+ XGIfb_heap_start =
+ (unsigned long) (xgi_video_info.video_vbase + xgi_video_info.heapstart);
+ printk(KERN_INFO "XGIfb: Memory heap starting at %dK\n",
+ (int)(xgi_video_info.heapstart / 1024));
+
+ XGIfb_heap_end = (unsigned long) xgi_video_info.video_vbase + xgi_video_info.video_size;
+ XGIfb_heap_size = XGIfb_heap_end - XGIfb_heap_start;
+
+
+
+ /* TW: Now initialize the 310 series' command queue mode.
+ * On 310/325, there are three queue modes available which
+ * are chosen by setting bits 7:5 in SR26:
+ * 1. MMIO queue mode (bit 5, 0x20). The hardware will keep
+ * track of the queue, the FIFO, command parsing and so
+ * on. This is the one comparable to the 300 series.
+ * 2. VRAM queue mode (bit 6, 0x40). In this case, one will
+ * have to do queue management himself. Register 0x85c4 will
+ * hold the location of the next free queue slot, 0x85c8
+ * is the "queue read pointer" whose way of working is
+ * unknown to me. Anyway, this mode would require a
+ * translation of the MMIO commands to some kind of
+ * accelerator assembly and writing these commands
+ * to the memory location pointed to by 0x85c4.
+ * We will not use this, as nobody knows how this
+ * "assembly" works, and as it would require a complete
+ * re-write of the accelerator code.
+ * 3. AGP queue mode (bit 7, 0x80). Works as 2., but keeps the
+ * queue in AGP memory space.
+ *
+ * SR26 bit 4 is called "Bypass H/W queue".
+ * SR26 bit 1 is called "Enable Command Queue Auto Correction"
+ * SR26 bit 0 resets the queue
+ * Size of queue memory is encoded in bits 3:2 like this:
+ * 00 (0x00) 512K
+ * 01 (0x04) 1M
+ * 10 (0x08) 2M
+ * 11 (0x0C) 4M
+ * The queue location is to be written to 0x85C0.
+ *
+ */
+ cmdq_baseport = (unsigned long *)(xgi_video_info.mmio_vbase + MMIO_QUEUE_PHYBASE);
+ write_port = (unsigned long *)(xgi_video_info.mmio_vbase + MMIO_QUEUE_WRITEPORT);
+ read_port = (unsigned long *)(xgi_video_info.mmio_vbase + MMIO_QUEUE_READPORT);
+
+ DPRINTK("AGP base: 0x%p, read: 0x%p, write: 0x%p\n", cmdq_baseport, read_port, write_port);
+
+ agp_size = COMMAND_QUEUE_AREA_SIZE;
+
+#ifndef AGPOFF
+ if (XGIfb_queuemode == AGP_CMD_QUEUE) {
+ agp_info = vmalloc(sizeof(*agp_info));
+ memset((void*)agp_info, 0x00, sizeof(*agp_info));
+ agp_copy_info(agp_info);
+
+ agp_backend_acquire();
+
+ agp = agp_allocate_memory(COMMAND_QUEUE_AREA_SIZE/PAGE_SIZE,
+ AGP_NORMAL_MEMORY);
+ if (agp == NULL) {
+ DPRINTK("XGIfb: Allocating AGP buffer failed.\n");
+ agp_enabled = 0;
+ } else {
+ if (agp_bind_memory(agp, agp->pg_start) != 0) {
+ DPRINTK("XGIfb: AGP: Failed to bind memory\n");
+ /* TODO: Free AGP memory here */
+ agp_enabled = 0;
+ } else {
+ agp_enable(0);
+ }
+ }
+ }
+#else
+ agp_enabled = 0;
+#endif
+
+ /* TW: Now select the queue mode */
+
+ if ((agp_enabled) && (XGIfb_queuemode == AGP_CMD_QUEUE)) {
+ cmd_type = AGP_CMD_QUEUE;
+ printk(KERN_INFO "XGIfb: Using AGP queue mode\n");
+/* } else if (XGIfb_heap_size >= COMMAND_QUEUE_AREA_SIZE) */
+ } else if (XGIfb_queuemode == VM_CMD_QUEUE) {
+ cmd_type = VM_CMD_QUEUE;
+ printk(KERN_INFO "XGIfb: Using VRAM queue mode\n");
+ } else {
+ printk(KERN_INFO "XGIfb: Using MMIO queue mode\n");
+ cmd_type = MMIO_CMD;
+ }
+
+ switch (agp_size) {
+ case 0x80000:
+ temp = XGI_CMD_QUEUE_SIZE_512k;
+ break;
+ case 0x100000:
+ temp = XGI_CMD_QUEUE_SIZE_1M;
+ break;
+ case 0x200000:
+ temp = XGI_CMD_QUEUE_SIZE_2M;
+ break;
+ case 0x400000:
+ temp = XGI_CMD_QUEUE_SIZE_4M;
+ break;
+ }
+
+ switch (cmd_type) {
+ case AGP_CMD_QUEUE:
+#ifndef AGPOFF
+ DPRINTK("XGIfb: AGP buffer base = 0x%lx, offset = 0x%x, size = %dK\n",
+ agp_info->aper_base, agp->physical, agp_size/1024);
+
+ agp_phys = agp_info->aper_base + agp->physical;
+
+ outXGIIDXREG(XGICR, IND_XGI_AGP_IO_PAD, 0);
+ outXGIIDXREG(XGICR, IND_XGI_AGP_IO_PAD, XGI_AGP_2X);
+
+ outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_THRESHOLD, COMMAND_QUEUE_THRESHOLD);
+
+ outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_SET, XGI_CMD_QUEUE_RESET);
+
+ *write_port = *read_port;
+
+ temp |= XGI_AGP_CMDQUEUE_ENABLE;
+ outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_SET, temp);
+
+ *cmdq_baseport = agp_phys;
+
+ XGIfb_caps |= AGP_CMD_QUEUE_CAP;
+#endif
+ break;
+
+ case VM_CMD_QUEUE:
+ XGIfb_heap_end -= COMMAND_QUEUE_AREA_SIZE;
+ XGIfb_heap_size -= COMMAND_QUEUE_AREA_SIZE;
+
+ outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_THRESHOLD, COMMAND_QUEUE_THRESHOLD);
+
+ outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_SET, XGI_CMD_QUEUE_RESET);
+
+ *write_port = *read_port;
+
+ temp |= XGI_VRAM_CMDQUEUE_ENABLE;
+ outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_SET, temp);
+
+ *cmdq_baseport = xgi_video_info.video_size - COMMAND_QUEUE_AREA_SIZE;
+
+ XGIfb_caps |= VM_CMD_QUEUE_CAP;
+
+ DPRINTK("XGIfb: VM Cmd Queue offset = 0x%lx, size is %dK\n",
+ *cmdq_baseport, COMMAND_QUEUE_AREA_SIZE/1024);
+ break;
+
+ default: /* MMIO */
+
+// printk("%s:%d - I'm here\n", __FUNCTION__, __LINE__);
+ /* TW: This previously only wrote XGI_MMIO_CMD_ENABLE
+ * to IND_XGI_CMDQUEUE_SET. I doubt that this is
+ * enough. Reserve memory in any way.
+ */
+// FIXME XGIfb_heap_end -= COMMAND_QUEUE_AREA_SIZE;
+// FIXME XGIfb_heap_size -= COMMAND_QUEUE_AREA_SIZE;
+// FIXME
+// FIXME outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_THRESHOLD, COMMAND_QUEUE_THRESHOLD);
+// FIXME outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_SET, XGI_CMD_QUEUE_RESET);
+// FIXME
+// FIXME *write_port = *read_port;
+// FIXME
+// FIXME /* TW: Set Auto_Correction bit */
+// FIXME temp |= (XGI_MMIO_CMD_ENABLE | XGI_CMD_AUTO_CORR);
+// FIXME // FIXME outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_SET, temp);
+// FIXME
+// FIXME *cmdq_baseport = xgi_video_info.video_size - COMMAND_QUEUE_AREA_SIZE;
+// FIXME
+// FIXME XGIfb_caps |= MMIO_CMD_QUEUE_CAP;
+// FIXME
+// FIXME DPRINTK("XGIfb: MMIO Cmd Queue offset = 0x%lx, size is %dK\n",
+// FIXME *cmdq_baseport, COMMAND_QUEUE_AREA_SIZE/1024);
+ break;
+ }
+
+
+
+
+ /* TW: Now reserve memory for the HWCursor. It is always located at the very
+ top of the videoRAM, right below the TB memory area (if used). */
+ if (XGIfb_heap_size >= XGIfb_hwcursor_size) {
+ XGIfb_heap_end -= XGIfb_hwcursor_size;
+ XGIfb_heap_size -= XGIfb_hwcursor_size;
+ XGIfb_hwcursor_vbase = XGIfb_heap_end;
+
+ XGIfb_caps |= HW_CURSOR_CAP;
+
+ DPRINTK("XGIfb: Hardware Cursor start at 0x%lx, size is %dK\n",
+ XGIfb_heap_end, XGIfb_hwcursor_size/1024);
+ }
+
+ XGIfb_heap.poha_chain = NULL;
+ XGIfb_heap.poh_freelist = NULL;
+
+ poh = XGIfb_poh_new_node();
+
+ if(poh == NULL) return 1;
+
+ poh->poh_next = &XGIfb_heap.oh_free;
+ poh->poh_prev = &XGIfb_heap.oh_free;
+ poh->size = XGIfb_heap_end - XGIfb_heap_start + 1;
+ poh->offset = XGIfb_heap_start - (unsigned long) xgi_video_info.video_vbase;
+
+ DPRINTK("XGIfb: Heap start:0x%p, end:0x%p, len=%dk\n",
+ (char *) XGIfb_heap_start, (char *) XGIfb_heap_end,
+ (unsigned int) poh->size / 1024);
+
+ DPRINTK("XGIfb: First Node offset:0x%x, size:%dk\n",
+ (unsigned int) poh->offset, (unsigned int) poh->size / 1024);
+
+ XGIfb_heap.oh_free.poh_next = poh;
+ XGIfb_heap.oh_free.poh_prev = poh;
+ XGIfb_heap.oh_free.size = 0;
+ XGIfb_heap.max_freesize = poh->size;
+
+ XGIfb_heap.oh_used.poh_next = &XGIfb_heap.oh_used;
+ XGIfb_heap.oh_used.poh_prev = &XGIfb_heap.oh_used;
+ XGIfb_heap.oh_used.size = SENTINEL;
+
+ return 0;
+}
+
+static XGI_OH *XGIfb_poh_new_node(void)
+{
+ int i;
+ unsigned long cOhs;
+ XGI_OHALLOC *poha;
+ XGI_OH *poh;
+
+ if (XGIfb_heap.poh_freelist == NULL) {
+ poha = kmalloc(OH_ALLOC_SIZE, GFP_KERNEL);
+ if(!poha) return NULL;
+
+ poha->poha_next = XGIfb_heap.poha_chain;
+ XGIfb_heap.poha_chain = poha;
+
+ cOhs = (OH_ALLOC_SIZE - sizeof(XGI_OHALLOC)) / sizeof(XGI_OH) + 1;
+
+ poh = &poha->aoh[0];
+ for (i = cOhs - 1; i != 0; i--) {
+ poh->poh_next = poh + 1;
+ poh = poh + 1;
+ }
+
+ poh->poh_next = NULL;
+ XGIfb_heap.poh_freelist = &poha->aoh[0];
+ }
+
+ poh = XGIfb_heap.poh_freelist;
+ XGIfb_heap.poh_freelist = poh->poh_next;
+
+ return (poh);
+}
+
+static XGI_OH *XGIfb_poh_allocate(unsigned long size)
+{
+ XGI_OH *pohThis;
+ XGI_OH *pohRoot;
+ int bAllocated = 0;
+
+ if (size > XGIfb_heap.max_freesize) {
+ DPRINTK("XGIfb: Can't allocate %dk size on offscreen\n",
+ (unsigned int) size / 1024);
+ return (NULL);
+ }
+
+ pohThis = XGIfb_heap.oh_free.poh_next;
+
+ while (pohThis != &XGIfb_heap.oh_free) {
+ if (size <= pohThis->size) {
+ bAllocated = 1;
+ break;
+ }
+ pohThis = pohThis->poh_next;
+ }
+
+ if (!bAllocated) {
+ DPRINTK("XGIfb: Can't allocate %dk size on offscreen\n",
+ (unsigned int) size / 1024);
+ return (NULL);
+ }
+
+ if (size == pohThis->size) {
+ pohRoot = pohThis;
+ XGIfb_delete_node(pohThis);
+ } else {
+ pohRoot = XGIfb_poh_new_node();
+
+ if (pohRoot == NULL) {
+ return (NULL);
+ }
+
+ pohRoot->offset = pohThis->offset;
+ pohRoot->size = size;
+
+ pohThis->offset += size;
+ pohThis->size -= size;
+ }
+
+ XGIfb_heap.max_freesize -= size;
+
+ pohThis = &XGIfb_heap.oh_used;
+ XGIfb_insert_node(pohThis, pohRoot);
+
+ return (pohRoot);
+}
+
+static void XGIfb_delete_node(XGI_OH *poh)
+{
+ XGI_OH *poh_prev;
+ XGI_OH *poh_next;
+
+ poh_prev = poh->poh_prev;
+ poh_next = poh->poh_next;
+
+ poh_prev->poh_next = poh_next;
+ poh_next->poh_prev = poh_prev;
+
+}
+
+static void XGIfb_insert_node(XGI_OH *pohList, XGI_OH *poh)
+{
+ XGI_OH *pohTemp;
+
+ pohTemp = pohList->poh_next;
+
+ pohList->poh_next = poh;
+ pohTemp->poh_prev = poh;
+
+ poh->poh_prev = pohList;
+ poh->poh_next = pohTemp;
+}
+
+static XGI_OH *XGIfb_poh_free(unsigned long base)
+{
+ XGI_OH *pohThis;
+ XGI_OH *poh_freed;
+ XGI_OH *poh_prev;
+ XGI_OH *poh_next;
+ unsigned long ulUpper;
+ unsigned long ulLower;
+ int foundNode = 0;
+
+ poh_freed = XGIfb_heap.oh_used.poh_next;
+
+ while(poh_freed != &XGIfb_heap.oh_used) {
+ if(poh_freed->offset == base) {
+ foundNode = 1;
+ break;
+ }
+
+ poh_freed = poh_freed->poh_next;
+ }
+
+ if (!foundNode) return (NULL);
+
+ XGIfb_heap.max_freesize += poh_freed->size;
+
+ poh_prev = poh_next = NULL;
+ ulUpper = poh_freed->offset + poh_freed->size;
+ ulLower = poh_freed->offset;
+
+ pohThis = XGIfb_heap.oh_free.poh_next;
+
+ while (pohThis != &XGIfb_heap.oh_free) {
+ if (pohThis->offset == ulUpper) {
+ poh_next = pohThis;
+ }
+ else if ((pohThis->offset + pohThis->size) ==
+ ulLower) {
+ poh_prev = pohThis;
+ }
+ pohThis = pohThis->poh_next;
+ }
+
+ XGIfb_delete_node(poh_freed);
+
+ if (poh_prev && poh_next) {
+ poh_prev->size += (poh_freed->size + poh_next->size);
+ XGIfb_delete_node(poh_next);
+ XGIfb_free_node(poh_freed);
+ XGIfb_free_node(poh_next);
+ return (poh_prev);
+ }
+
+ if (poh_prev) {
+ poh_prev->size += poh_freed->size;
+ XGIfb_free_node(poh_freed);
+ return (poh_prev);
+ }
+
+ if (poh_next) {
+ poh_next->size += poh_freed->size;
+ poh_next->offset = poh_freed->offset;
+ XGIfb_free_node(poh_freed);
+ return (poh_next);
+ }
+
+ XGIfb_insert_node(&XGIfb_heap.oh_free, poh_freed);
+
+ return (poh_freed);
+}
+
+static void XGIfb_free_node(XGI_OH *poh)
+{
+ if(poh == NULL) return;
+
+ poh->poh_next = XGIfb_heap.poh_freelist;
+ XGIfb_heap.poh_freelist = poh;
+
+}
+
+void XGI_malloc(struct XGI_memreq *req)
+{
+ XGI_OH *poh;
+
+ poh = XGIfb_poh_allocate(req->size);
+
+ if(poh == NULL) {
+ req->offset = 0;
+ req->size = 0;
+ DPRINTK("XGIfb: Video RAM allocation failed\n");
+ } else {
+ DPRINTK("XGIfb: Video RAM allocation succeeded: 0x%p\n",
+ (char *) (poh->offset + (unsigned long) xgi_video_info.video_vbase));
+
+ req->offset = poh->offset;
+ req->size = poh->size;
+ }
+
+}
+
+void XGI_free(unsigned long base)
+{
+ XGI_OH *poh;
+
+ poh = XGIfb_poh_free(base);
+
+ if(poh == NULL) {
+ DPRINTK("XGIfb: XGIfb_poh_free() failed at base 0x%x\n",
+ (unsigned int) base);
+ }
+}
+
+/* --------------------- SetMode routines ------------------------- */
+
+static void XGIfb_pre_setmode(void)
+{
+ u8 cr30 = 0, cr31 = 0;
+
+ inXGIIDXREG(XGICR, 0x31, cr31);
+ cr31 &= ~0x60;
+
+ switch (xgi_video_info.disp_state & DISPTYPE_DISP2) {
+ case DISPTYPE_CRT2:
+ cr30 = (XGI_VB_OUTPUT_CRT2 | XGI_SIMULTANEOUS_VIEW_ENABLE);
+ cr31 |= XGI_DRIVER_MODE;
+ break;
+ case DISPTYPE_LCD:
+ cr30 = (XGI_VB_OUTPUT_LCD | XGI_SIMULTANEOUS_VIEW_ENABLE);
+ cr31 |= XGI_DRIVER_MODE;
+ break;
+ case DISPTYPE_TV:
+ if (xgi_video_info.TV_type == TVMODE_HIVISION)
+ cr30 = (XGI_VB_OUTPUT_HIVISION | XGI_SIMULTANEOUS_VIEW_ENABLE);
+ else if (xgi_video_info.TV_plug == TVPLUG_SVIDEO)
+ cr30 = (XGI_VB_OUTPUT_SVIDEO | XGI_SIMULTANEOUS_VIEW_ENABLE);
+ else if (xgi_video_info.TV_plug == TVPLUG_COMPOSITE)
+ cr30 = (XGI_VB_OUTPUT_COMPOSITE | XGI_SIMULTANEOUS_VIEW_ENABLE);
+ else if (xgi_video_info.TV_plug == TVPLUG_SCART)
+ cr30 = (XGI_VB_OUTPUT_SCART | XGI_SIMULTANEOUS_VIEW_ENABLE);
+ cr31 |= XGI_DRIVER_MODE;
+
+ if (XGIfb_tvmode == 1 || xgi_video_info.TV_type == TVMODE_PAL)
+ cr31 |= 0x01;
+ else
+ cr31 &= ~0x01;
+ break;
+ default: /* disable CRT2 */
+ cr30 = 0x00;
+ cr31 |= (XGI_DRIVER_MODE | XGI_VB_OUTPUT_DISABLE);
+ }
+
+ outXGIIDXREG(XGICR, IND_XGI_SCRATCH_REG_CR30, cr30);
+ outXGIIDXREG(XGICR, IND_XGI_SCRATCH_REG_CR31, cr31);
+ outXGIIDXREG(XGICR, IND_XGI_SCRATCH_REG_CR33, (XGIfb_rate_idx & 0x0F));
+
+ if(xgi_video_info.accel) XGIfb_syncaccel();
+
+
+}
+
+static void XGIfb_post_setmode(void)
+{
+ u8 reg;
+ BOOLEAN doit = TRUE;
+#if 0 /* TW: Wrong: Is not in MMIO space, but in RAM */
+ /* Backup mode number to MMIO space */
+ if(xgi_video_info.mmio_vbase) {
+ *(volatile u8 *)(((u8*)xgi_video_info.mmio_vbase) + 0x449) = (unsigned char)XGIfb_mode_no;
+ }
+#endif
+/* outXGIIDXREG(XGISR,IND_XGI_PASSWORD,XGI_PASSWORD);
+ outXGIIDXREG(XGICR,0x13,0x00);
+ setXGIIDXREG(XGISR,0x0E,0xF0,0x01);
+*test**/
+ if (xgi_video_info.video_bpp == 8) {
+ /* TW: We can't switch off CRT1 on LVDS/Chrontel in 8bpp Modes */
+ if ((xgi_video_info.hasVB == HASVB_LVDS) || (xgi_video_info.hasVB == HASVB_LVDS_CHRONTEL)) {
+ doit = FALSE;
+ }
+ /* TW: We can't switch off CRT1 on 301B-DH in 8bpp Modes if using LCD */
+ if (xgi_video_info.disp_state & DISPTYPE_LCD) {
+ doit = FALSE;
+ }
+ }
+
+ /* TW: We can't switch off CRT1 if bridge is in slave mode */
+ if(xgi_video_info.hasVB != HASVB_NONE) {
+ inXGIIDXREG(XGIPART1, 0x00, reg);
+
+
+ if((reg & 0x50) == 0x10) {
+ doit = FALSE;
+ }
+
+ } else XGIfb_crt1off = 0;
+
+ inXGIIDXREG(XGICR, 0x17, reg);
+ if((XGIfb_crt1off) && (doit))
+ reg &= ~0x80;
+ else
+ reg |= 0x80;
+ outXGIIDXREG(XGICR, 0x17, reg);
+
+ andXGIIDXREG(XGISR, IND_XGI_RAMDAC_CONTROL, ~0x04);
+
+ if((xgi_video_info.disp_state & DISPTYPE_TV) && (xgi_video_info.hasVB == HASVB_301)) {
+
+ inXGIIDXREG(XGIPART4, 0x01, reg);
+
+ if(reg < 0xB0) { /* Set filter for XGI301 */
+
+ switch (xgi_video_info.video_width) {
+ case 320:
+ filter_tb = (xgi_video_info.TV_type == TVMODE_NTSC) ? 4 : 12;
+ break;
+ case 640:
+ filter_tb = (xgi_video_info.TV_type == TVMODE_NTSC) ? 5 : 13;
+ break;
+ case 720:
+ filter_tb = (xgi_video_info.TV_type == TVMODE_NTSC) ? 6 : 14;
+ break;
+ case 800:
+ filter_tb = (xgi_video_info.TV_type == TVMODE_NTSC) ? 7 : 15;
+ break;
+ default:
+ filter = -1;
+ break;
+ }
+
+ orXGIIDXREG(XGIPART1, XGIfb_CRT2_write_enable, 0x01);
+
+ if(xgi_video_info.TV_type == TVMODE_NTSC) {
+
+ andXGIIDXREG(XGIPART2, 0x3a, 0x1f);
+
+ if (xgi_video_info.TV_plug == TVPLUG_SVIDEO) {
+
+ andXGIIDXREG(XGIPART2, 0x30, 0xdf);
+
+ } else if (xgi_video_info.TV_plug == TVPLUG_COMPOSITE) {
+
+ orXGIIDXREG(XGIPART2, 0x30, 0x20);
+
+ switch (xgi_video_info.video_width) {
+ case 640:
+ outXGIIDXREG(XGIPART2, 0x35, 0xEB);
+ outXGIIDXREG(XGIPART2, 0x36, 0x04);
+ outXGIIDXREG(XGIPART2, 0x37, 0x25);
+ outXGIIDXREG(XGIPART2, 0x38, 0x18);
+ break;
+ case 720:
+ outXGIIDXREG(XGIPART2, 0x35, 0xEE);
+ outXGIIDXREG(XGIPART2, 0x36, 0x0C);
+ outXGIIDXREG(XGIPART2, 0x37, 0x22);
+ outXGIIDXREG(XGIPART2, 0x38, 0x08);
+ break;
+ case 800:
+ outXGIIDXREG(XGIPART2, 0x35, 0xEB);
+ outXGIIDXREG(XGIPART2, 0x36, 0x15);
+ outXGIIDXREG(XGIPART2, 0x37, 0x25);
+ outXGIIDXREG(XGIPART2, 0x38, 0xF6);
+ break;
+ }
+ }
+
+ } else if(xgi_video_info.TV_type == TVMODE_PAL) {
+
+ andXGIIDXREG(XGIPART2, 0x3A, 0x1F);
+
+ if (xgi_video_info.TV_plug == TVPLUG_SVIDEO) {
+
+ andXGIIDXREG(XGIPART2, 0x30, 0xDF);
+
+ } else if (xgi_video_info.TV_plug == TVPLUG_COMPOSITE) {
+
+ orXGIIDXREG(XGIPART2, 0x30, 0x20);
+
+ switch (xgi_video_info.video_width) {
+ case 640:
+ outXGIIDXREG(XGIPART2, 0x35, 0xF1);
+ outXGIIDXREG(XGIPART2, 0x36, 0xF7);
+ outXGIIDXREG(XGIPART2, 0x37, 0x1F);
+ outXGIIDXREG(XGIPART2, 0x38, 0x32);
+ break;
+ case 720:
+ outXGIIDXREG(XGIPART2, 0x35, 0xF3);
+ outXGIIDXREG(XGIPART2, 0x36, 0x00);
+ outXGIIDXREG(XGIPART2, 0x37, 0x1D);
+ outXGIIDXREG(XGIPART2, 0x38, 0x20);
+ break;
+ case 800:
+ outXGIIDXREG(XGIPART2, 0x35, 0xFC);
+ outXGIIDXREG(XGIPART2, 0x36, 0xFB);
+ outXGIIDXREG(XGIPART2, 0x37, 0x14);
+ outXGIIDXREG(XGIPART2, 0x38, 0x2A);
+ break;
+ }
+ }
+ }
+
+ if ((filter >= 0) && (filter <=7)) {
+ DPRINTK("FilterTable[%d]-%d: %02x %02x %02x %02x\n", filter_tb, filter,
+ XGI_TV_filter[filter_tb].filter[filter][0],
+ XGI_TV_filter[filter_tb].filter[filter][1],
+ XGI_TV_filter[filter_tb].filter[filter][2],
+ XGI_TV_filter[filter_tb].filter[filter][3]
+ );
+ outXGIIDXREG(XGIPART2, 0x35, (XGI_TV_filter[filter_tb].filter[filter][0]));
+ outXGIIDXREG(XGIPART2, 0x36, (XGI_TV_filter[filter_tb].filter[filter][1]));
+ outXGIIDXREG(XGIPART2, 0x37, (XGI_TV_filter[filter_tb].filter[filter][2]));
+ outXGIIDXREG(XGIPART2, 0x38, (XGI_TV_filter[filter_tb].filter[filter][3]));
+ }
+
+ }
+
+ }
+
+}
+
+#ifndef MODULE
+XGIINITSTATIC int __init XGIfb_setup(char *options)
+{
+ char *this_opt;
+
+
+
+ xgi_video_info.refresh_rate = 0;
+
+ printk(KERN_INFO "XGIfb: Options %s\n", options);
+
+ if (!options || !*options)
+ return 0;
+
+ while((this_opt = strsep(&options, ",")) != NULL) {
+
+ if (!*this_opt) continue;
+
+ if (!strncmp(this_opt, "mode:", 5)) {
+ XGIfb_search_mode(this_opt + 5);
+ } else if (!strncmp(this_opt, "vesa:", 5)) {
+ XGIfb_search_vesamode(simple_strtoul(this_opt + 5, NULL, 0));
+ } else if (!strncmp(this_opt, "mode:", 5)) {
+ XGIfb_search_mode(this_opt + 5);
+ } else if (!strncmp(this_opt, "vesa:", 5)) {
+ XGIfb_search_vesamode(simple_strtoul(this_opt + 5, NULL, 0));
+ } else if (!strncmp(this_opt, "vrate:", 6)) {
+ xgi_video_info.refresh_rate = simple_strtoul(this_opt + 6, NULL, 0);
+ } else if (!strncmp(this_opt, "rate:", 5)) {
+ xgi_video_info.refresh_rate = simple_strtoul(this_opt + 5, NULL, 0);
+ } else if (!strncmp(this_opt, "off", 3)) {
+ XGIfb_off = 1;
+ } else if (!strncmp(this_opt, "crt1off", 7)) {
+ XGIfb_crt1off = 1;
+ } else if (!strncmp(this_opt, "filter:", 7)) {
+ filter = (int)simple_strtoul(this_opt + 7, NULL, 0);
+ } else if (!strncmp(this_opt, "forcecrt2type:", 14)) {
+ XGIfb_search_crt2type(this_opt + 14);
+ } else if (!strncmp(this_opt, "forcecrt1:", 10)) {
+ XGIfb_forcecrt1 = (int)simple_strtoul(this_opt + 10, NULL, 0);
+ } else if (!strncmp(this_opt, "tvmode:",7)) {
+ XGIfb_search_tvstd(this_opt + 7);
+ } else if (!strncmp(this_opt, "tvstandard:",11)) {
+ XGIfb_search_tvstd(this_opt + 7);
+ } else if (!strncmp(this_opt, "mem:",4)) {
+ XGIfb_mem = simple_strtoul(this_opt + 4, NULL, 0);
+ } else if (!strncmp(this_opt, "dstn", 4)) {
+ enable_dstn = 1;
+ /* TW: DSTN overrules forcecrt2type */
+ XGIfb_crt2type = DISPTYPE_LCD;
+ } else if (!strncmp(this_opt, "queuemode:", 10)) {
+ XGIfb_search_queuemode(this_opt + 10);
+ } else if (!strncmp(this_opt, "pdc:", 4)) {
+ XGIfb_pdc = simple_strtoul(this_opt + 4, NULL, 0);
+ if(XGIfb_pdc & ~0x3c) {
+ printk(KERN_INFO "XGIfb: Illegal pdc parameter\n");
+ XGIfb_pdc = 0;
+ }
+ } else if (!strncmp(this_opt, "noaccel", 7)) {
+ XGIfb_accel = 0;
+ } else if (!strncmp(this_opt, "noypan", 6)) {
+ XGIfb_ypan = 0;
+ } else if (!strncmp(this_opt, "userom:", 7)) {
+ XGIfb_userom = (int)simple_strtoul(this_opt + 7, NULL, 0);
+// } else if (!strncmp(this_opt, "useoem:", 7)) {
+// XGIfb_useoem = (int)simple_strtoul(this_opt + 7, NULL, 0);
+ } else {
+ XGIfb_search_mode(this_opt);
+// printk(KERN_INFO "XGIfb: Invalid option %s\n", this_opt);
+ }
+
+ /* TW: Acceleration only with MMIO mode */
+ if((XGIfb_queuemode != -1) && (XGIfb_queuemode != MMIO_CMD)) {
+ XGIfb_ypan = 0;
+ XGIfb_accel = 0;
+ }
+ /* TW: Panning only with acceleration */
+ if(XGIfb_accel == 0) XGIfb_ypan = 0;
+
+ }
+ printk("\nxgifb: outa xgifb_setup 3450");
+ return 0;
+}
+#endif
+
+static unsigned char VBIOS_BUF[65535];
+
+unsigned char* attempt_map_rom(struct pci_dev *dev,void *copy_address)
+{
+ u32 rom_size = 0;
+ u32 rom_address = 0;
+ int j;
+
+ /* Get the size of the expansion rom */
+ pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0xFFFFFFFF);
+ pci_read_config_dword(dev, PCI_ROM_ADDRESS, &rom_size);
+ if ((rom_size & 0x01) == 0)
+ {
+ printk("No ROM\n");
+ return NULL;
+ }
+
+ rom_size &= 0xFFFFF800;
+ rom_size = (~rom_size)+1;
+
+ rom_address = pci_resource_start(dev, 0);
+ if (rom_address == 0 || rom_address == 0xFFFFFFF0)
+ {
+ printk("No suitable rom address found\n"); return NULL;
+ }
+
+ printk("ROM Size is %dK, Address is %x\n", rom_size/1024, rom_address);
+
+ /* Map ROM */
+ pci_write_config_dword(dev, PCI_ROM_ADDRESS, rom_address | PCI_ROM_ADDRESS_ENABLE);
+
+ /* memcpy(copy_address, rom_address, rom_size); */
+ {
+ unsigned char *virt_addr = ioremap(rom_address, 0x8000000);
+
+ unsigned char *from = (unsigned char *)virt_addr;
+ unsigned char *to = (unsigned char *)copy_address;
+ for (j=0; j<65536 /*rom_size*/; j++) *to++ = *from++;
+ }
+
+ pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0);
+
+ printk("Copy is done\n");
+
+ return copy_address;
+}
+
+int __devinit xgifb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ u16 reg16;
+ u8 reg, reg1;
+ u8 CR48,CR38;
+ if (XGIfb_off)
+ return -ENXIO;
+
+ XGIfb_registered = 0;
+
+ memset(&XGIhw_ext, 0, sizeof(HW_DEVICE_EXTENSION));
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,3))
+ fb_info = framebuffer_alloc(sizeof(struct fb_info), &pdev->dev);
+ if(!fb_info) return -ENOMEM;
+#else
+ XGI_fb_info = kmalloc( sizeof(struct fb_info), GFP_KERNEL);
+ if(!XGI_fb_info) return -ENOMEM;
+ memset(XGI_fb_info, 0, sizeof(struct fb_info));
+#endif
+
+ xgi_video_info.chip_id = pdev->device;
+ pci_read_config_byte(pdev, PCI_REVISION_ID,&xgi_video_info.revision_id);
+ pci_read_config_word(pdev, PCI_COMMAND, ®16);
+ XGIhw_ext.jChipRevision = xgi_video_info.revision_id;
+ XGIvga_enabled = reg16 & 0x01;
+
+ xgi_video_info.pcibus = pdev->bus->number;
+ xgi_video_info.pcislot = PCI_SLOT(pdev->devfn);
+ xgi_video_info.pcifunc = PCI_FUNC(pdev->devfn);
+ xgi_video_info.subsysvendor = pdev->subsystem_vendor;
+ xgi_video_info.subsysdevice = pdev->subsystem_device;
+
+ xgi_video_info.video_base = pci_resource_start(pdev, 0);
+ xgi_video_info.mmio_base = pci_resource_start(pdev, 1);
+ XGIfb_mmio_size = pci_resource_len(pdev, 1);
+ xgi_video_info.vga_base = pci_resource_start(pdev, 2) + 0x30;
+ XGIhw_ext.pjIOAddress = (PUCHAR)xgi_video_info.vga_base;
+ //XGI_Pr.RelIO = ioremap(pci_resource_start(pdev, 2), 128) + 0x30;
+ printk("XGIfb: Relocate IO address: %lx [%08lx] \n", (unsigned long)pci_resource_start(pdev, 2), XGI_Pr.RelIO);
+
+ if (pci_enable_device(pdev))
+ return -EIO;
+
+ XGIRegInit(&XGI_Pr, (ULONG)XGIhw_ext.pjIOAddress);
+
+ outXGIIDXREG(XGISR, IND_XGI_PASSWORD, XGI_PASSWORD);
+ inXGIIDXREG(XGISR, IND_XGI_PASSWORD, reg1);
+
+ if(reg1 != 0xa1) /*I/O error */
+ {
+ printk("\nXGIfb: I/O error!!!");
+ return -EIO;
+ }
+
+ switch (xgi_video_info.chip_id) {
+ case PCI_DEVICE_ID_XG_20:
+ orXGIIDXREG(XGICR, Index_CR_GPIO_Reg3, GPIOG_EN);
+ inXGIIDXREG(XGICR, Index_CR_GPIO_Reg1, CR48);
+ if (CR48&GPIOG_READ)
+ xgi_video_info.chip = XG21;
+ else
+ xgi_video_info.chip = XG20;
+ XGIfb_hwcursor_size = HW_CURSOR_AREA_SIZE_315 * 2;
+ XGIfb_CRT2_write_enable = IND_XGI_CRT2_WRITE_ENABLE_315;
+ break;
+ case PCI_DEVICE_ID_XG_40:
+ xgi_video_info.chip = XG40;
+ XGIfb_hwcursor_size = HW_CURSOR_AREA_SIZE_315 * 2;
+ XGIfb_CRT2_write_enable = IND_XGI_CRT2_WRITE_ENABLE_315;
+ break;
+ case PCI_DEVICE_ID_XG_41:
+ xgi_video_info.chip = XG41;
+ XGIfb_hwcursor_size = HW_CURSOR_AREA_SIZE_315 * 2;
+ XGIfb_CRT2_write_enable = IND_XGI_CRT2_WRITE_ENABLE_315;
+ break;
+ case PCI_DEVICE_ID_XG_42:
+ xgi_video_info.chip = XG42;
+ XGIfb_hwcursor_size = HW_CURSOR_AREA_SIZE_315 * 2;
+ XGIfb_CRT2_write_enable = IND_XGI_CRT2_WRITE_ENABLE_315;
+ break;
+ case PCI_DEVICE_ID_XG_27:
+ xgi_video_info.chip = XG27;
+ XGIfb_hwcursor_size = HW_CURSOR_AREA_SIZE_315 * 2;
+ XGIfb_CRT2_write_enable = IND_XGI_CRT2_WRITE_ENABLE_315;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ printk("XGIfb:chipid = %x\n",xgi_video_info.chip);
+ XGIhw_ext.jChipType = xgi_video_info.chip;
+
+ switch (xgi_video_info.chip) {
+ case XG40:
+ case XG41:
+ case XG42:
+ case XG45:
+ case XG20:
+ case XG21:
+ case XG27:
+ XGIhw_ext.bIntegratedMMEnabled = TRUE;
+ break;
+
+ default:
+ break;
+ }
+
+
+ XGIhw_ext.pDevice = NULL;
+ if ((xgi_video_info.chip == XG21) || (XGIfb_userom))
+ {
+ XGIhw_ext.pjVirtualRomBase = attempt_map_rom(pdev, VBIOS_BUF);
+
+ if(XGIhw_ext.pjVirtualRomBase)
+ printk(KERN_INFO "XGIfb: Video ROM found and mapped to %p\n",XGIhw_ext.pjVirtualRomBase);
+ else
+ printk(KERN_INFO "XGIfb: Video ROM not found\n");
+ } else {
+ XGIhw_ext.pjVirtualRomBase = NULL;
+ printk(KERN_INFO "XGIfb: Video ROM usage disabled\n");
+ }
+ XGIhw_ext.pjCustomizedROMImage = NULL;
+ XGIhw_ext.bSkipDramSizing = 0;
+ XGIhw_ext.pQueryVGAConfigSpace = &XGIfb_query_VGA_config_space;
+// XGIhw_ext.pQueryNorthBridgeSpace = &XGIfb_query_north_bridge_space;
+ strcpy(XGIhw_ext.szVBIOSVer, "0.84");
+
+
+ XGIhw_ext.pSR = vmalloc(sizeof(XGI_DSReg) * SR_BUFFER_SIZE);
+ if (XGIhw_ext.pSR == NULL)
+ {
+ printk(KERN_ERR "XGIfb: Fatal error: Allocating SRReg space failed.\n");
+ return -ENODEV;
+ }
+ XGIhw_ext.pSR[0].jIdx = XGIhw_ext.pSR[0].jVal = 0xFF;
+
+ XGIhw_ext.pCR = vmalloc(sizeof(XGI_DSReg) * CR_BUFFER_SIZE);
+ if (XGIhw_ext.pCR == NULL)
+ {
+ vfree(XGIhw_ext.pSR);
+ printk(KERN_ERR "XGIfb: Fatal error: Allocating CRReg space failed.\n");
+ return -ENODEV;
+ }
+ XGIhw_ext.pCR[0].jIdx = XGIhw_ext.pCR[0].jVal = 0xFF;
+
+
+
+
+ if (!XGIvga_enabled)
+ {
+ /* Mapping Max FB Size for 315 Init */
+ XGIhw_ext.pjVideoMemoryAddress = ioremap(xgi_video_info.video_base, 0x10000000);
+ if((xgifb_mode_idx < 0) || ((XGIbios_mode[xgifb_mode_idx].mode_no) != 0xFF))
+ {
+#ifdef LINUXBIOS
+ printk("XGIfb: XGIInit() ...");
+ /* XGIInitNewt for LINUXBIOS only */
+ if(XGIInitNew(&XGIhw_ext))
+ {
+ printk("OK\n");
+ }
+ else
+ {
+ printk("Fail\n");
+ }
+#endif
+
+ outXGIIDXREG(XGISR, IND_XGI_PASSWORD, XGI_PASSWORD);
+
+
+ }
+ }
+#ifdef LINUXBIOS
+ else
+ {
+ XGIhw_ext.pjVideoMemoryAddress = ioremap(xgi_video_info.video_base, 0x10000000);
+ if((xgifb_mode_idx < 0) || ((XGIbios_mode[xgifb_mode_idx].mode_no) != 0xFF))
+ {
+
+ outXGIIDXREG(XGISR, IND_XGI_PASSWORD, XGI_PASSWORD);
+
+ // yilin Because no VBIOS DRAM Sizing, Dram size will error.
+ // Set SR13 ,14 temporarily for UDtech
+ outXGIIDXREG(XGISR, 0x13, 0x45);
+ outXGIIDXREG(XGISR, 0x14, 0x51);
+
+
+ }
+ }
+#endif
+ if (XGIfb_get_dram_size())
+ {
+ vfree(XGIhw_ext.pSR);
+ vfree(XGIhw_ext.pCR);
+ printk(KERN_INFO "XGIfb: Fatal error: Unable to determine RAM size.\n");
+ return -ENODEV;
+ }
+
+
+
+ if((xgifb_mode_idx < 0) || ((XGIbios_mode[xgifb_mode_idx].mode_no) != 0xFF))
+ {
+ /* Enable PCI_LINEAR_ADDRESSING and MMIO_ENABLE */
+ orXGIIDXREG(XGISR, IND_XGI_PCI_ADDRESS_SET, (XGI_PCI_ADDR_ENABLE | XGI_MEM_MAP_IO_ENABLE));
+ /* Enable 2D accelerator engine */
+ orXGIIDXREG(XGISR, IND_XGI_MODULE_ENABLE, XGI_ENABLE_2D);
+ }
+
+ XGIhw_ext.ulVideoMemorySize = xgi_video_info.video_size;
+
+ if (!request_mem_region(xgi_video_info.video_base, xgi_video_info.video_size, "XGIfb FB"))
+ { printk("unable request memory size %x",xgi_video_info.video_size);
+ printk(KERN_ERR "XGIfb: Fatal error: Unable to reserve frame buffer memory\n");
+ printk(KERN_ERR "XGIfb: Is there another framebuffer driver active?\n");
+ vfree(XGIhw_ext.pSR);
+ vfree(XGIhw_ext.pCR);
+ return -ENODEV;
+ }
+
+ if (!request_mem_region(xgi_video_info.mmio_base, XGIfb_mmio_size, "XGIfb MMIO"))
+ {
+ printk(KERN_ERR "XGIfb: Fatal error: Unable to reserve MMIO region\n");
+ release_mem_region(xgi_video_info.video_base, xgi_video_info.video_size);
+ vfree(XGIhw_ext.pSR);
+ vfree(XGIhw_ext.pCR);
+ return -ENODEV;
+ }
+
+ xgi_video_info.video_vbase = XGIhw_ext.pjVideoMemoryAddress =
+ ioremap(xgi_video_info.video_base, xgi_video_info.video_size);
+ xgi_video_info.mmio_vbase = ioremap(xgi_video_info.mmio_base, XGIfb_mmio_size);
+
+ printk(KERN_INFO "XGIfb: Framebuffer at 0x%lx, mapped to 0x%p, size %dk\n",
+ xgi_video_info.video_base, xgi_video_info.video_vbase,xgi_video_info.video_size / 1024);
+
+ printk(KERN_INFO "XGIfb: MMIO at 0x%lx, mapped to 0x%p, size %ldk\n",
+ xgi_video_info.mmio_base, xgi_video_info.mmio_vbase,XGIfb_mmio_size / 1024);
+ printk("XGIfb: XGIInitNew() ...");
+ if(XGIInitNew(&XGIhw_ext))
+ {
+ printk("OK\n");
+ }
+ else
+ {
+ printk("Fail\n");
+ }
+
+ if(XGIfb_heap_init())
+ {
+ printk(KERN_WARNING "XGIfb: Failed to initialize offscreen memory heap\n");
+ }
+
+
+ xgi_video_info.mtrr = (unsigned int) 0;
+
+ if((xgifb_mode_idx < 0) || ((XGIbios_mode[xgifb_mode_idx].mode_no) != 0xFF))
+ {
+ xgi_video_info.hasVB = HASVB_NONE;
+ if((xgi_video_info.chip == XG20)||(xgi_video_info.chip == XG27))
+ xgi_video_info.hasVB = HASVB_NONE;
+ else if(xgi_video_info.chip == XG21) {
+ inXGIIDXREG(XGICR,0x38,CR38);
+ if ((CR38&0xE0) == 0xC0) {
+ xgi_video_info.disp_state = DISPTYPE_LCD;
+ if (!XGIfb_GetXG21LVDSData()) {
+ int m;
+ for (m=0; m < sizeof(XGI21_LCDCapList)/sizeof(XGI21_LVDSCapStruct); m++) {
+ if ((XGI21_LCDCapList[m].LVDSHDE == XGIbios_mode[xgifb_mode_idx].xres) &&
+ (XGI21_LCDCapList[m].LVDSVDE == XGIbios_mode[xgifb_mode_idx].yres)) {
+ XGINew_SetReg1( XGI_Pr.P3d4 , 0x36, m) ;
+ }
+ }
+ }
+ }
+ else if ((CR38&0xE0) == 0x60)
+ xgi_video_info.hasVB = HASVB_CHRONTEL ;
+ else
+ xgi_video_info.hasVB = HASVB_NONE;
+ }
+ else
+ XGIfb_get_VB_type();
+
+ XGIhw_ext.ujVBChipID = VB_CHIP_UNKNOWN;
+
+ XGIhw_ext.ulExternalChip = 0;
+
+ switch (xgi_video_info.hasVB) {
+ case HASVB_301:
+ inXGIIDXREG(XGIPART4, 0x01, reg);
+ if (reg >= 0xE0) {
+ XGIhw_ext.ujVBChipID = VB_CHIP_302LV;
+ printk(KERN_INFO "XGIfb: XGI302LV bridge detected (revision 0x%02x)\n",reg);
+ } else if (reg >= 0xD0) {
+ XGIhw_ext.ujVBChipID = VB_CHIP_301LV;
+ printk(KERN_INFO "XGIfb: XGI301LV bridge detected (revision 0x%02x)\n",reg);
+ }
+ /* else if (reg >= 0xB0) {
+ XGIhw_ext.ujVBChipID = VB_CHIP_301B;
+ inXGIIDXREG(XGIPART4,0x23,reg1);
+ printk("XGIfb: XGI301B bridge detected\n");
+ }*/
+ else {
+ XGIhw_ext.ujVBChipID = VB_CHIP_301;
+ printk("XGIfb: XGI301 bridge detected\n");
+ }
+ break;
+ case HASVB_302:
+ inXGIIDXREG(XGIPART4, 0x01, reg);
+ if (reg >= 0xE0) {
+ XGIhw_ext.ujVBChipID = VB_CHIP_302LV;
+ printk(KERN_INFO "XGIfb: XGI302LV bridge detected (revision 0x%02x)\n",reg);
+ } else if (reg >= 0xD0) {
+ XGIhw_ext.ujVBChipID = VB_CHIP_301LV;
+ printk(KERN_INFO "XGIfb: XGI302LV bridge detected (revision 0x%02x)\n",reg);
+ } else if (reg >= 0xB0) {
+ inXGIIDXREG(XGIPART4,0x23,reg1);
+
+ XGIhw_ext.ujVBChipID = VB_CHIP_302B;
+
+ } else {
+ XGIhw_ext.ujVBChipID = VB_CHIP_302;
+ printk(KERN_INFO "XGIfb: XGI302 bridge detected\n");
+ }
+ break;
+ case HASVB_LVDS:
+ XGIhw_ext.ulExternalChip = 0x1;
+ printk(KERN_INFO "XGIfb: LVDS transmitter detected\n");
+ break;
+ case HASVB_TRUMPION:
+ XGIhw_ext.ulExternalChip = 0x2;
+ printk(KERN_INFO "XGIfb: Trumpion Zurac LVDS scaler detected\n");
+ break;
+ case HASVB_CHRONTEL:
+ XGIhw_ext.ulExternalChip = 0x4;
+ printk(KERN_INFO "XGIfb: Chrontel TV encoder detected\n");
+ break;
+ case HASVB_LVDS_CHRONTEL:
+ XGIhw_ext.ulExternalChip = 0x5;
+ printk(KERN_INFO "XGIfb: LVDS transmitter and Chrontel TV encoder detected\n");
+ break;
+ default:
+ printk(KERN_INFO "XGIfb: No or unknown bridge type detected\n");
+ break;
+ }
+
+ if (xgi_video_info.hasVB != HASVB_NONE) {
+ XGIfb_detect_VB();
+ }
+
+ if (xgi_video_info.disp_state & DISPTYPE_DISP2) {
+ if (XGIfb_crt1off)
+ xgi_video_info.disp_state |= DISPMODE_SINGLE;
+ else
+ xgi_video_info.disp_state |= (DISPMODE_MIRROR | DISPTYPE_CRT1);
+ } else {
+ xgi_video_info.disp_state = DISPMODE_SINGLE | DISPTYPE_CRT1;
+ }
+
+ if (xgi_video_info.disp_state & DISPTYPE_LCD) {
+ if (!enable_dstn) {
+ inXGIIDXREG(XGICR, IND_XGI_LCD_PANEL, reg);
+ reg &= 0x0f;
+ XGIhw_ext.ulCRT2LCDType = XGI310paneltype[reg];
+
+ } else {
+ // TW: FSTN/DSTN
+ XGIhw_ext.ulCRT2LCDType = LCD_320x480;
+ }
+ }
+
+ XGIfb_detectedpdc = 0;
+
+ XGIfb_detectedlcda = 0xff;
+#ifndef LINUXBIOS
+
+ /* TW: Try to find about LCDA */
+
+ if((XGIhw_ext.ujVBChipID == VB_CHIP_302B) ||
+ (XGIhw_ext.ujVBChipID == VB_CHIP_301LV) ||
+ (XGIhw_ext.ujVBChipID == VB_CHIP_302LV))
+ {
+ int tmp;
+ inXGIIDXREG(XGICR,0x34,tmp);
+ if(tmp <= 0x13)
+ {
+ // Currently on LCDA? (Some BIOSes leave CR38)
+ inXGIIDXREG(XGICR,0x38,tmp);
+ if((tmp & 0x03) == 0x03)
+ {
+// XGI_Pr.XGI_UseLCDA = TRUE;
+ }else
+ {
+ // Currently on LCDA? (Some newer BIOSes set D0 in CR35)
+ inXGIIDXREG(XGICR,0x35,tmp);
+ if(tmp & 0x01)
+ {
+// XGI_Pr.XGI_UseLCDA = TRUE;
+ }else
+ {
+ inXGIIDXREG(XGICR,0x30,tmp);
+ if(tmp & 0x20)
+ {
+ inXGIIDXREG(XGIPART1,0x13,tmp);
+ if(tmp & 0x04)
+ {
+// XGI_Pr.XGI_UseLCDA = TRUE;
+ }
+ }
+ }
+ }
+ }
+
+ }
+
+
+#endif
+
+ if (xgifb_mode_idx >= 0)
+ xgifb_mode_idx = XGIfb_validate_mode(xgifb_mode_idx);
+
+ if (xgifb_mode_idx < 0) {
+ switch (xgi_video_info.disp_state & DISPTYPE_DISP2) {
+ case DISPTYPE_LCD:
+ xgifb_mode_idx = DEFAULT_LCDMODE;
+ if (xgi_video_info.chip == XG21)
+ {
+ xgifb_mode_idx = XGIfb_GetXG21DefaultLVDSModeIdx();
+ }
+ break;
+ case DISPTYPE_TV:
+ xgifb_mode_idx = DEFAULT_TVMODE;
+ break;
+ default:
+ xgifb_mode_idx = DEFAULT_MODE;
+ break;
+ }
+ }
+
+ XGIfb_mode_no = XGIbios_mode[xgifb_mode_idx].mode_no;
+
+
+ if( xgi_video_info.refresh_rate == 0)
+ xgi_video_info.refresh_rate = 60; /*yilin set default refresh rate */
+ if(XGIfb_search_refresh_rate(xgi_video_info.refresh_rate) == 0)
+ {
+ XGIfb_rate_idx = XGIbios_mode[xgifb_mode_idx].rate_idx;
+ xgi_video_info.refresh_rate = 60;
+ }
+
+ xgi_video_info.video_bpp = XGIbios_mode[xgifb_mode_idx].bpp;
+ xgi_video_info.video_vwidth = xgi_video_info.video_width = XGIbios_mode[xgifb_mode_idx].xres;
+ xgi_video_info.video_vheight = xgi_video_info.video_height = XGIbios_mode[xgifb_mode_idx].yres;
+ xgi_video_info.org_x = xgi_video_info.org_y = 0;
+ xgi_video_info.video_linelength = xgi_video_info.video_width * (xgi_video_info.video_bpp >> 3);
+ switch(xgi_video_info.video_bpp) {
+ case 8:
+ xgi_video_info.DstColor = 0x0000;
+ xgi_video_info.XGI310_AccelDepth = 0x00000000;
+ xgi_video_info.video_cmap_len = 256;
+ break;
+ case 16:
+ xgi_video_info.DstColor = 0x8000;
+ xgi_video_info.XGI310_AccelDepth = 0x00010000;
+ xgi_video_info.video_cmap_len = 16;
+ break;
+ case 32:
+ xgi_video_info.DstColor = 0xC000;
+ xgi_video_info.XGI310_AccelDepth = 0x00020000;
+ xgi_video_info.video_cmap_len = 16;
+ break;
+ default:
+ xgi_video_info.video_cmap_len = 16;
+ printk(KERN_INFO "XGIfb: Unsupported depth %d", xgi_video_info.video_bpp);
+ break;
+ }
+
+
+
+ printk(KERN_INFO "XGIfb: Default mode is %dx%dx%d (%dHz)\n",
+ xgi_video_info.video_width, xgi_video_info.video_height, xgi_video_info.video_bpp,
+ xgi_video_info.refresh_rate);
+
+ default_var.xres = default_var.xres_virtual = xgi_video_info.video_width;
+ default_var.yres = default_var.yres_virtual = xgi_video_info.video_height;
+ default_var.bits_per_pixel = xgi_video_info.video_bpp;
+
+ XGIfb_bpp_to_var(&default_var);
+
+ default_var.pixclock = (u32) (1000000000 /
+ XGIfb_mode_rate_to_dclock(&XGI_Pr, &XGIhw_ext,
+ XGIfb_mode_no, XGIfb_rate_idx));
+
+ if(XGIfb_mode_rate_to_ddata(&XGI_Pr, &XGIhw_ext,
+ XGIfb_mode_no, XGIfb_rate_idx,
+ &default_var.left_margin, &default_var.right_margin,
+ &default_var.upper_margin, &default_var.lower_margin,
+ &default_var.hsync_len, &default_var.vsync_len,
+ &default_var.sync, &default_var.vmode)) {
+
+ if((default_var.vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) {
+ default_var.yres <<= 1;
+ default_var.yres_virtual <<= 1;
+ } else if((default_var.vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE) {
+ default_var.pixclock >>= 1;
+ default_var.yres >>= 1;
+ default_var.yres_virtual >>= 1;
+ }
+
+ }
+
+
+#if 0
+#ifdef XGIFB_PAN
+ if(XGIfb_ypan) {
+ default_var.yres_virtual =
+ xgi_video_info.heapstart / (default_var.xres * (default_var.bits_per_pixel >> 3));
+ if(default_var.yres_virtual <= default_var.yres) {
+ default_var.yres_virtual = default_var.yres;
+ }
+ }
+#endif
+#endif
+
+
+ xgi_video_info.accel = 0;
+ if(XGIfb_accel) {
+ xgi_video_info.accel = -1;
+ default_var.accel_flags |= FB_ACCELF_TEXT;
+ XGIfb_initaccel();
+ }
+
+ fb_info->flags = FBINFO_FLAG_DEFAULT;
+ fb_info->var = default_var;
+ fb_info->fix = XGIfb_fix;
+ fb_info->par = &xgi_video_info;
+ fb_info->screen_base = xgi_video_info.video_vbase;
+ fb_info->fbops = &XGIfb_ops;
+ XGIfb_get_fix(&fb_info->fix, -1, fb_info);
+ fb_info->pseudo_palette = pseudo_palette;
+
+ fb_alloc_cmap(&fb_info->cmap, 256 , 0);
+
+
+#ifdef CONFIG_MTRR
+ xgi_video_info.mtrr = mtrr_add((unsigned int) xgi_video_info.video_base,
+ (unsigned int) xgi_video_info.video_size,
+ MTRR_TYPE_WRCOMB, 1);
+ if(xgi_video_info.mtrr) {
+ printk(KERN_INFO "XGIfb: Added MTRRs\n");
+ }
+#endif
+
+ if(register_framebuffer(fb_info) < 0)
+ {
+ return -EINVAL;
+ }
+
+ XGIfb_registered = 1;
+
+ printk(KERN_INFO "XGIfb: Installed XGIFB_GET_INFO ioctl (%x)\n", XGIFB_GET_INFO);
+
+/* printk(KERN_INFO "XGIfb: 2D acceleration is %s, scrolling mode %s\n",
+ XGIfb_accel ? "enabled" : "disabled",
+ XGIfb_ypan ? "ypan" : "redraw");
+*/
+ printk(KERN_INFO "fb%d: %s frame buffer device, Version %d.%d.%02d\n",
+ fb_info->node, myid, VER_MAJOR, VER_MINOR, VER_LEVEL);
+
+
+ }
+
+ dumpVGAReg();
+
+ return 0;
+}
+
+
+/*****************************************************/
+/* PCI DEVICE HANDLING */
+/*****************************************************/
+
+static void __devexit xgifb_remove(struct pci_dev *pdev)
+{
+ /* Unregister the framebuffer */
+// if(xgi_video_info.registered) {
+ unregister_framebuffer(fb_info);
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,3))
+ framebuffer_release(fb_info);
+#else
+ kfree(fb_info);
+#endif
+// }
+
+ pci_set_drvdata(pdev, NULL);
+
+};
+
+static struct pci_driver xgifb_driver = {
+ .name = "xgifb",
+ .id_table = xgifb_pci_table,
+ .probe = xgifb_probe,
+ .remove = __devexit_p(xgifb_remove)
+};
+
+XGIINITSTATIC int __init xgifb_init(void)
+{
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,8)
+#ifndef MODULE
+ char *option = NULL;
+
+ if (fb_get_options("xgifb", &option))
+ return -ENODEV;
+ XGIfb_setup(option);
+#endif
+#endif
+ return(pci_register_driver(&xgifb_driver));
+}
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,8)
+#ifndef MODULE
+module_init(xgifb_init);
+#endif
+#endif
+
+/*****************************************************/
+/* MODULE */
+/*****************************************************/
+
+#ifdef MODULE
+
+static char *mode = NULL;
+static int vesa = 0;
+static unsigned int rate = 0;
+static unsigned int crt1off = 1;
+static unsigned int mem = 0;
+static char *forcecrt2type = NULL;
+static int forcecrt1 = -1;
+static int pdc = -1;
+static int pdc1 = -1;
+static int noaccel = -1;
+static int noypan = -1;
+static int nomax = -1;
+static int userom = -1;
+static int useoem = -1;
+static char *tvstandard = NULL;
+static int nocrt2rate = 0;
+static int scalelcd = -1;
+static char *specialtiming = NULL;
+static int lvdshl = -1;
+static int tvxposoffset = 0, tvyposoffset = 0;
+#if !defined(__i386__) && !defined(__x86_64__)
+static int resetcard = 0;
+static int videoram = 0;
+#endif
+
+MODULE_DESCRIPTION("Z7 Z9 Z9S Z11 framebuffer device driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("XGITECH , Others");
+
+
+
+module_param(mem, int, 0);
+module_param(noaccel, int, 0);
+module_param(noypan, int, 0);
+module_param(nomax, int, 0);
+module_param(userom, int, 0);
+module_param(useoem, int, 0);
+module_param(mode, charp, 0);
+module_param(vesa, int, 0);
+module_param(rate, int, 0);
+module_param(forcecrt1, int, 0);
+module_param(forcecrt2type, charp, 0);
+module_param(scalelcd, int, 0);
+module_param(pdc, int, 0);
+module_param(pdc1, int, 0);
+module_param(specialtiming, charp, 0);
+module_param(lvdshl, int, 0);
+module_param(tvstandard, charp, 0);
+module_param(tvxposoffset, int, 0);
+module_param(tvyposoffset, int, 0);
+module_param(filter, int, 0);
+module_param(nocrt2rate, int, 0);
+#if !defined(__i386__) && !defined(__x86_64__)
+module_param(resetcard, int, 0);
+module_param(videoram, int, 0);
+#endif
+
+
+MODULE_PARM_DESC(mem,
+ "\nDetermines the beginning of the video memory heap in KB. This heap is used\n"
+ "for video RAM management for eg. DRM/DRI. On 300 series, the default depends\n"
+ "on the amount of video RAM available. If 8MB of video RAM or less is available,\n"
+ "the heap starts at 4096KB, if between 8 and 16MB are available at 8192KB,\n"
+ "otherwise at 12288KB. On 315 and Xabre series, the heap size is 32KB by default.\n"
+ "The value is to be specified without 'KB' and must match the MaxXFBMem setting\n"
+ "for XFree86 4.x/X.org 6.7 and later.\n");
+
+MODULE_PARM_DESC(noaccel,
+ "\nIf set to anything other than 0, 2D acceleration will be disabled.\n"
+ "(default: 0)\n");
+
+MODULE_PARM_DESC(noypan,
+ "\nIf set to anything other than 0, y-panning will be disabled and scrolling\n"
+ "will be performed by redrawing the screen. (default: 0)\n");
+
+MODULE_PARM_DESC(nomax,
+ "\nIf y-panning is enabled, xgifb will by default use the entire available video\n"
+ "memory for the virtual screen in order to optimize scrolling performance. If\n"
+ "this is set to anything other than 0, xgifb will not do this and thereby \n"
+ "enable the user to positively specify a virtual Y size of the screen using\n"
+ "fbset. (default: 0)\n");
+
+
+
+MODULE_PARM_DESC(mode,
+ "\nSelects the desired default display mode in the format XxYxDepth,\n"
+ "eg. 1024x768x16. Other formats supported include XxY-Depth and\n"
+ "XxY-Depth@Rate. If the parameter is only one (decimal or hexadecimal)\n"
+ "number, it will be interpreted as a VESA mode number. (default: 800x600x8)\n");
+
+MODULE_PARM_DESC(vesa,
+ "\nSelects the desired default display mode by VESA defined mode number, eg.\n"
+ "0x117 (default: 0x0103)\n");
+
+
+MODULE_PARM_DESC(rate,
+ "\nSelects the desired vertical refresh rate for CRT1 (external VGA) in Hz.\n"
+ "If the mode is specified in the format XxY-Depth@Rate, this parameter\n"
+ "will be ignored (default: 60)\n");
+
+MODULE_PARM_DESC(forcecrt1,
+ "\nNormally, the driver autodetects whether or not CRT1 (external VGA) is \n"
+ "connected. With this option, the detection can be overridden (1=CRT1 ON,\n"
+ "0=CRT1 OFF) (default: [autodetected])\n");
+
+MODULE_PARM_DESC(forcecrt2type,
+ "\nIf this option is omitted, the driver autodetects CRT2 output devices, such as\n"
+ "LCD, TV or secondary VGA. With this option, this autodetection can be\n"
+ "overridden. Possible parameters are LCD, TV, VGA or NONE. NONE disables CRT2.\n"
+ "On systems with a SiS video bridge, parameters SVIDEO, COMPOSITE or SCART can\n"
+ "be used instead of TV to override the TV detection. Furthermore, on systems\n"
+ "with a SiS video bridge, SVIDEO+COMPOSITE, HIVISION, YPBPR480I, YPBPR480P,\n"
+ "YPBPR720P and YPBPR1080I are understood. However, whether or not these work\n"
+ "depends on the very hardware in use. (default: [autodetected])\n");
+
+MODULE_PARM_DESC(scalelcd,
+ "\nSetting this to 1 will force the driver to scale the LCD image to the panel's\n"
+ "native resolution. Setting it to 0 will disable scaling; LVDS panels will\n"
+ "show black bars around the image, TMDS panels will probably do the scaling\n"
+ "themselves. Default: 1 on LVDS panels, 0 on TMDS panels\n");
+
+MODULE_PARM_DESC(pdc,
+ "\nThis is for manually selecting the LCD panel delay compensation. The driver\n"
+ "should detect this correctly in most cases; however, sometimes this is not\n"
+ "possible. If you see 'small waves' on the LCD, try setting this to 4, 32 or 24\n"
+ "on a 300 series chipset; 6 on a 315 series chipset. If the problem persists,\n"
+ "try other values (on 300 series: between 4 and 60 in steps of 4; on 315 series:\n"
+ "any value from 0 to 31). (default: autodetected, if LCD is active during start)\n");
+
+MODULE_PARM_DESC(pdc1,
+ "\nThis is same as pdc, but for LCD-via CRT1. Hence, this is for the 315/330\n"
+ "series only. (default: autodetected if LCD is in LCD-via-CRT1 mode during\n"
+ "startup) - Note: currently, this has no effect because LCD-via-CRT1 is not\n"
+ "implemented yet.\n");
+
+MODULE_PARM_DESC(specialtiming,
+ "\nPlease refer to documentation for more information on this option.\n");
+
+MODULE_PARM_DESC(lvdshl,
+ "\nPlease refer to documentation for more information on this option.\n");
+
+MODULE_PARM_DESC(tvstandard,
+ "\nThis allows overriding the BIOS default for the TV standard. Valid choices are\n"
+ "pal, ntsc, palm and paln. (default: [auto; pal or ntsc only])\n");
+
+MODULE_PARM_DESC(tvxposoffset,
+ "\nRelocate TV output horizontally. Possible parameters: -32 through 32.\n"
+ "Default: 0\n");
+
+MODULE_PARM_DESC(tvyposoffset,
+ "\nRelocate TV output vertically. Possible parameters: -32 through 32.\n"
+ "Default: 0\n");
+
+MODULE_PARM_DESC(filter,
+ "\nSelects TV flicker filter type (only for systems with a SiS301 video bridge).\n"
+ "(Possible values 0-7, default: [no filter])\n");
+
+MODULE_PARM_DESC(nocrt2rate,
+ "\nSetting this to 1 will force the driver to use the default refresh rate for\n"
+ "CRT2 if CRT2 type is VGA. (default: 0, use same rate as CRT1)\n");
+
+
+
+
+int __init xgifb_init_module(void)
+{
+ printk("\nXGIfb_init_module");
+ if(mode)
+ XGIfb_search_mode(mode);
+ else if (vesa != -1)
+ XGIfb_search_vesamode(vesa);
+
+ return(xgifb_init());
+}
+
+static void __exit xgifb_remove_module(void)
+{
+ pci_unregister_driver(&xgifb_driver);
+ printk(KERN_DEBUG "xgifb: Module unloaded\n");
+}
+
+module_init(xgifb_init_module);
+module_exit(xgifb_remove_module);
+
+#endif /* /MODULE */
+
+EXPORT_SYMBOL(XGI_malloc);
+EXPORT_SYMBOL(XGI_free);
+
diff --git a/drivers/staging/xgifb/XGIfb.h b/drivers/staging/xgifb/XGIfb.h
new file mode 100644
index 0000000..41bf163
--- /dev/null
+++ b/drivers/staging/xgifb/XGIfb.h
@@ -0,0 +1,215 @@
+#ifndef _LINUX_XGIFB
+#define _LINUX_XGIFB
+#include <linux/spinlock.h>
+#include <asm/ioctl.h>
+#include <asm/types.h>
+
+#define DISPTYPE_CRT1 0x00000008L
+#define DISPTYPE_CRT2 0x00000004L
+#define DISPTYPE_LCD 0x00000002L
+#define DISPTYPE_TV 0x00000001L
+#define DISPTYPE_DISP1 DISPTYPE_CRT1
+#define DISPTYPE_DISP2 (DISPTYPE_CRT2 | DISPTYPE_LCD | DISPTYPE_TV)
+#define DISPMODE_SINGLE 0x00000020L
+#define DISPMODE_MIRROR 0x00000010L
+#define DISPMODE_DUALVIEW 0x00000040L
+
+#define HASVB_NONE 0x00
+#define HASVB_301 0x01
+#define HASVB_LVDS 0x02
+#define HASVB_TRUMPION 0x04
+#define HASVB_LVDS_CHRONTEL 0x10
+#define HASVB_302 0x20
+#define HASVB_303 0x40
+#define HASVB_CHRONTEL 0x80
+
+#ifndef XGIFB_ID
+#define XGIFB_ID 0x53495346 /* Identify myself with 'XGIF' */
+#endif
+
+typedef enum _XGI_CHIP_TYPE {
+ XGI_VGALegacy = 0,
+ XGI_300,
+ XGI_630,
+ XGI_730,
+ XGI_540,
+ XGI_315H,
+ XGI_315,
+ XGI_315PRO,
+ XGI_550,
+ XGI_640,
+ XGI_740,
+ XGI_650,
+ XGI_650M,
+ XGI_330 = 16,
+ XGI_660,
+ XGI_661,
+ XGI_760,
+ XG40 = 32,
+ XG41,
+ XG42,
+ XG45,
+ XG20 = 48,
+ XG21,
+ XG27,
+ MAX_XGI_CHIP
+} XGI_CHIP_TYPE;
+
+typedef enum _TVTYPE {
+ TVMODE_NTSC = 0,
+ TVMODE_PAL,
+ TVMODE_HIVISION,
+ TVTYPE_PALM, // vicki@030226
+ TVTYPE_PALN, // vicki@030226
+ TVTYPE_NTSCJ, // vicki@030226
+ TVMODE_TOTAL
+} XGI_TV_TYPE;
+
+
+typedef struct _XGIFB_INFO XGIfb_info;
+struct _XGIFB_INFO {
+
+unsigned long XGIfb_id;
+ int chip_id; /* PCI ID of detected chip */
+ int memory; /* video memory in KB which XGIfb manages */
+ int heapstart; /* heap start (= XGIfb "mem" argument) in KB */
+ unsigned char fbvidmode; /* current XGIfb mode */
+
+ unsigned char XGIfb_version;
+ unsigned char XGIfb_revision;
+ unsigned char XGIfb_patchlevel;
+
+ unsigned char XGIfb_caps; /* XGIfb capabilities */
+
+ int XGIfb_tqlen; /* turbo queue length (in KB) */
+
+ unsigned int XGIfb_pcibus; /* The card's PCI ID */
+ unsigned int XGIfb_pcislot;
+ unsigned int XGIfb_pcifunc;
+
+ unsigned char XGIfb_lcdpdc; /* PanelDelayCompensation */
+
+ unsigned char XGIfb_lcda; /* Detected status of LCDA for low res/text modes */
+
+ char reserved[235]; /* for future use */
+};
+
+
+
+
+typedef enum _TVPLUGTYPE { // vicki@030226
+// TVPLUG_Legacy = 0,
+// TVPLUG_COMPOSITE,
+// TVPLUG_SVIDEO,
+// TVPLUG_SCART,
+// TVPLUG_TOTAL
+ TVPLUG_UNKNOWN = 0,
+ TVPLUG_COMPOSITE = 1,
+ TVPLUG_SVIDEO = 2,
+ TVPLUG_COMPOSITE_AND_SVIDEO = 3,
+ TVPLUG_SCART = 4,
+ TVPLUG_YPBPR_525i = 5,
+ TVPLUG_YPBPR_525P = 6,
+ TVPLUG_YPBPR_750P = 7,
+ TVPLUG_YPBPR_1080i = 8,
+ TVPLUG_TOTAL
+} XGI_TV_PLUG;
+
+
+struct mode_info {
+ int bpp;
+ int xres;
+ int yres;
+ int v_xres;
+ int v_yres;
+ int org_x;
+ int org_y;
+ unsigned int vrate;
+};
+
+struct ap_data {
+ struct mode_info minfo;
+ unsigned long iobase;
+ unsigned int mem_size;
+ unsigned long disp_state;
+ XGI_CHIP_TYPE chip;
+ unsigned char hasVB;
+ XGI_TV_TYPE TV_type;
+ XGI_TV_PLUG TV_plug;
+ unsigned long version;
+ char reserved[256];
+};
+
+
+
+/* If changing this, vgatypes.h must also be changed (for X driver) */
+
+
+/*
+ * NOTE! The ioctl types used to be "size_t" by mistake, but were
+ * really meant to be __u32. Changed to "__u32" even though that
+ * changes the value on 64-bit architectures, because the value
+ * (with a 4-byte size) is also hardwired in vgatypes.h for user
+ * space exports. So "__u32" is actually more compatible, duh!
+ */
+#define XGIFB_GET_INFO _IOR('n',0xF8,__u32)
+#define XGIFB_GET_VBRSTATUS _IOR('n',0xF9,__u32)
+
+
+
+struct video_info{
+ int chip_id;
+ unsigned int video_size;
+ unsigned long video_base;
+ char * video_vbase;
+ unsigned long mmio_base;
+ char * mmio_vbase;
+ unsigned long vga_base;
+ unsigned long mtrr;
+ unsigned long heapstart;
+
+ int video_bpp;
+ int video_cmap_len;
+ int video_width;
+ int video_height;
+ int video_vwidth;
+ int video_vheight;
+ int org_x;
+ int org_y;
+ int video_linelength;
+ unsigned int refresh_rate;
+
+ unsigned long disp_state;
+ unsigned char hasVB;
+ unsigned char TV_type;
+ unsigned char TV_plug;
+
+ XGI_CHIP_TYPE chip;
+ unsigned char revision_id;
+
+ unsigned short DstColor;
+ unsigned long XGI310_AccelDepth;
+ unsigned long CommandReg;
+
+ spinlock_t lockaccel;
+
+ unsigned int pcibus;
+ unsigned int pcislot;
+ unsigned int pcifunc;
+
+ int accel;
+ unsigned short subsysvendor;
+ unsigned short subsysdevice;
+
+ char reserved[236];
+};
+
+
+extern struct video_info xgi_video_info;
+
+#ifdef __KERNEL__
+//extern void xgi_malloc(struct xgi_memreq *req);
+extern void xgi_free(unsigned long base);
+extern void xgi_dispinfo(struct ap_data *rec);
+#endif
+#endif
diff --git a/drivers/staging/xgifb/osdef.h b/drivers/staging/xgifb/osdef.h
new file mode 100644
index 0000000..4bc7d3a
--- /dev/null
+++ b/drivers/staging/xgifb/osdef.h
@@ -0,0 +1,153 @@
+#ifndef _OSDEF_H_
+#define _OSDEF_H_
+
+/* #define WINCE_HEADER*/
+/*#define WIN2000*/
+/* #define TC */
+#define LINUX_KERNEL
+/* #define LINUX_XF86 */
+
+/**********************************************************************/
+#ifdef LINUX_KERNEL
+//#include <linux/config.h>
+#endif
+
+
+/**********************************************************************/
+#ifdef TC
+#endif
+#ifdef WIN2000
+#endif
+#ifdef WINCE_HEADER
+#endif
+#ifdef LINUX_XF86
+#define LINUX
+#endif
+#ifdef LINUX_KERNEL
+#define LINUX
+#endif
+
+/**********************************************************************/
+#ifdef TC
+#define XGI_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize);
+#endif
+#ifdef WIN2000
+#define XGI_SetMemory(MemoryAddress,MemorySize,value) MemFill((PVOID) MemoryAddress,(ULONG) MemorySize,(UCHAR) value);
+#endif
+#ifdef WINCE_HEADER
+#define XGI_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize);
+#endif
+#ifdef LINUX_XF86
+#define XGI_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize)
+#endif
+#ifdef LINUX_KERNEL
+#define XGI_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize)
+#endif
+/**********************************************************************/
+
+/**********************************************************************/
+
+#ifdef TC
+#define XGI_MemoryCopy(Destination,Soruce,Length) memmove(Destination, Soruce, Length);
+#endif
+#ifdef WIN2000
+#define XGI_MemoryCopy(Destination,Soruce,Length) /*VideoPortMoveMemory((PUCHAR)Destination , Soruce,length);*/
+#endif
+#ifdef WINCE_HEADER
+#define XGI_MemoryCopy(Destination,Soruce,Length) memmove(Destination, Soruce, Length);
+#endif
+#ifdef LINUX_XF86
+#define XGI_MemoryCopy(Destination,Soruce,Length) memcpy(Destination,Soruce,Length)
+#endif
+#ifdef LINUX_KERNEL
+#define XGI_MemoryCopy(Destination,Soruce,Length) memcpy(Destination,Soruce,Length)
+#endif
+
+/**********************************************************************/
+
+#ifdef OutPortByte
+#undef OutPortByte
+#endif /* OutPortByte */
+
+#ifdef OutPortWord
+#undef OutPortWord
+#endif /* OutPortWord */
+
+#ifdef OutPortLong
+#undef OutPortLong
+#endif /* OutPortLong */
+
+#ifdef InPortByte
+#undef InPortByte
+#endif /* InPortByte */
+
+#ifdef InPortWord
+#undef InPortWord
+#endif /* InPortWord */
+
+#ifdef InPortLong
+#undef InPortLong
+#endif /* InPortLong */
+
+/**********************************************************************/
+/* TC */
+/**********************************************************************/
+
+#ifdef TC
+#define OutPortByte(p,v) outp((unsigned short)(p),(unsigned char)(v))
+#define OutPortWord(p,v) outp((unsigned short)(p),(unsigned short)(v))
+#define OutPortLong(p,v) outp((unsigned short)(p),(unsigned long)(v))
+#define InPortByte(p) inp((unsigned short)(p))
+#define InPortWord(p) inp((unsigned short)(p))
+#define InPortLong(p) ((inp((unsigned short)(p+2))<<16) | inp((unsigned short)(p)))
+#endif
+
+/**********************************************************************/
+/* LINUX XF86 */
+/**********************************************************************/
+
+#ifdef LINUX_XF86
+#define OutPortByte(p,v) outb((CARD16)(p),(CARD8)(v))
+#define OutPortWord(p,v) outw((CARD16)(p),(CARD16)(v))
+#define OutPortLong(p,v) outl((CARD16)(p),(CARD32)(v))
+#define InPortByte(p) inb((CARD16)(p))
+#define InPortWord(p) inw((CARD16)(p))
+#define InPortLong(p) inl((CARD16)(p))
+#endif
+
+#ifdef LINUX_KERNEL
+#define OutPortByte(p,v) outb((u8)(v),(p))
+#define OutPortWord(p,v) outw((u16)(v),(p))
+#define OutPortLong(p,v) outl((u32)(v),(p))
+#define InPortByte(p) inb(p)
+#define InPortWord(p) inw(p)
+#define InPortLong(p) inl(p)
+#endif
+
+/**********************************************************************/
+/* WIN 2000 */
+/**********************************************************************/
+
+#ifdef WIN2000
+#define OutPortByte(p,v) VideoPortWritePortUchar ((PUCHAR) (p), (UCHAR) (v))
+#define OutPortWord(p,v) VideoPortWritePortUshort((PUSHORT) (p), (USHORT) (v))
+#define OutPortLong(p,v) VideoPortWritePortUlong ((PULONG) (p), (ULONG) (v))
+#define InPortByte(p) VideoPortReadPortUchar ((PUCHAR) (p))
+#define InPortWord(p) VideoPortReadPortUshort ((PUSHORT) (p))
+#define InPortLong(p) VideoPortReadPortUlong ((PULONG) (p))
+#endif
+
+
+/**********************************************************************/
+/* WIN CE */
+/**********************************************************************/
+
+#ifdef WINCE_HEADER
+#define OutPortByte(p,v) WRITE_PORT_UCHAR ((PUCHAR) (p), (UCHAR) (v))
+#define OutPortWord(p,v) WRITE_PORT_USHORT((PUSHORT) (p), (USHORT) (v))
+#define OutPortLong(p,v) WRITE_PORT_ULONG ((PULONG) (p), (ULONG) (v))
+#define InPortByte(p) READ_PORT_UCHAR ((PUCHAR) (p))
+#define InPortWord(p) READ_PORT_USHORT ((PUSHORT) (p))
+#define InPortLong(p) READ_PORT_ULONG ((PULONG) (p))
+#endif
+#endif // _OSDEF_H_
diff --git a/drivers/staging/xgifb/vb_def.h b/drivers/staging/xgifb/vb_def.h
new file mode 100644
index 0000000..17a7ada
--- /dev/null
+++ b/drivers/staging/xgifb/vb_def.h
@@ -0,0 +1,1017 @@
+/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/xgi/initdef.h,v 1.4 2000/12/02 01:16:17 dawes Exp $ */
+#ifndef _INITDEF_
+#define _INITDEF_
+
+#ifndef NewScratch
+#define NewScratch
+#endif
+/* shampoo */
+#ifdef LINUX_KERNEL
+#define SEQ_ADDRESS_PORT 0x0014
+#define SEQ_DATA_PORT 0x0015
+#define MISC_OUTPUT_REG_READ_PORT 0x001C
+#define MISC_OUTPUT_REG_WRITE_PORT 0x0012
+#define GRAPH_DATA_PORT 0x1F
+#define GRAPH_ADDRESS_PORT 0x1E
+#define XGI_MASK_DUAL_CHIP 0x04 /* SR3A */
+#define CRTC_ADDRESS_PORT_COLOR 0x0024
+#define VIDEO_SUBSYSTEM_ENABLE_PORT 0x0013
+#define PCI_COMMAND 0x04
+#endif
+/* ~shampoo */
+
+
+#define VB_XGI301 0x0001 /*301b*/
+#define VB_XGI301B 0x0002
+#define VB_XGI302B 0x0004
+#define VB_XGI301LV 0x0008 /*301lv*/
+#define VB_XGI302LV 0x0010
+#define VB_XGI301C 0x0020 /* for 301C */
+#define VB_NoLCD 0x8000
+/*end 301b*/
+
+#define VB_YPbPrInfo 0x07 /*301lv*/
+#define VB_YPbPr525i 0x00
+#define VB_YPbPr525p 0x01
+#define VB_YPbPr750p 0x02
+#define VB_YPbPr1080i 0x03
+
+/* #define CRT1Len 17 */
+#define LVDSCRT1Len 15
+#define CHTVRegDataLen 5
+
+/* #define ModeInfoFlag 0x07 */
+/* #define IsTextMode 0x07 */
+/* #define ModeText 0x00 */
+/* #define ModeCGA 0x01 */
+/* #define ModeEGA 0x02 */
+/* #define ModeVGA 0x03 */
+/* #define Mode15Bpp 0x04 */
+/* #define Mode16Bpp 0x05 */
+/* #define Mode24Bpp 0x06 */
+/* #define Mode32Bpp 0x07 */
+
+/* #define DACInfoFlag 0x18 */
+/* #define MemoryInfoFlag 0x1E0 */
+/* #define MemorySizeShift 0x05 */
+
+#define Charx8Dot 0x0200
+#define LineCompareOff 0x0400
+#define CRT2Mode 0x0800
+#define HalfDCLK 0x1000
+#define NoSupportSimuTV 0x2000
+#define DoubleScanMode 0x8000
+
+#define SupportAllCRT2 0x0078
+#define SupportTV 0x0008
+#define SupportHiVisionTV 0x0010
+#define SupportLCD 0x0020
+#define SupportRAMDAC2 0x0040
+#define NoSupportTV 0x0070
+#define NoSupportHiVisionTV 0x0060
+#define NoSupportLCD 0x0058
+#define SupportCHTV 0x0800
+#define SupportCRT2in301C 0x0100 /* for 301C */
+#define SupportTV1024 0x0800 /*301b*/
+#define SupportYPbPr 0x1000 /*301lv*/
+#define InterlaceMode 0x0080
+#define SyncPP 0x0000
+#define SyncPN 0x4000
+#define SyncNP 0x8000
+/* #define SyncNN 0xc000 */
+#define ECLKindex0 0x0000
+#define ECLKindex1 0x0100
+#define ECLKindex2 0x0200
+#define ECLKindex3 0x0300
+#define ECLKindex4 0x0400
+
+#define SetSimuScanMode 0x0001
+#define SwitchToCRT2 0x0002
+/* #define SetCRT2ToTV 0x009C */
+#define SetCRT2ToAVIDEO 0x0004
+#define SetCRT2ToSVIDEO 0x0008
+#define SetCRT2ToSCART 0x0010
+#define SetCRT2ToLCD 0x0020
+#define SetCRT2ToRAMDAC 0x0040
+#define SetCRT2ToHiVisionTV 0x0080
+#define SetNTSCTV 0x0000
+/* #define SetPALTV 0x0100 */
+#define SetInSlaveMode 0x0200
+#define SetNotSimuMode 0x0400
+#define SetNotSimuTVMode 0x0400
+#define SetDispDevSwitch 0x0800
+#define LoadDACFlag 0x1000
+#define DisableCRT2Display 0x2000
+#define DriverMode 0x4000
+#define HotKeySwitch 0x8000
+#define SetCHTVOverScan 0x8000
+/* #define SetCRT2ToLCDA 0x8000 301b */
+#define PanelRGB18Bit 0x0100
+#define PanelRGB24Bit 0x0000
+
+#define TVOverScan 0x10
+#define TVOverScanShift 4
+#define ClearBufferFlag 0x20
+#define EnableDualEdge 0x01 /*301b*/
+#define SetToLCDA 0x02
+
+#define YPbPrModeInfo 0x38
+/* #define YPbPrMode525i 0x00 */
+/* #define YPbPrMode525p 0x08 */
+/* #define YPbPrMode750p 0x10 */
+/* #define YPbPrMode1080i 0x18 */
+
+#define SetSCARTOutput 0x01
+#define BoardTVType 0x02
+#define EnablePALMN 0x40
+/* #define ProgrammingCRT2 0x01 */
+/* #define TVSimuMode 0x02 */
+/* #define RPLLDIV2XO 0x04 */
+/* #define LCDVESATiming 0x08 */
+/* #define EnableLVDSDDA 0x10 */
+#define SetDispDevSwitchFlag 0x20
+#define CheckWinDos 0x40
+#define SetJDOSMode 0x80
+
+#define Panel320x480 0x07/*fstn*/
+/* [ycchen] 02/12/03 Modify for Multi-Sync. LCD Support */
+#define PanelResInfo 0x1F /* CR36 Panel Type/LCDResInfo */
+#define PanelRefInfo 0x60
+#define Panel800x600 0x01
+#define Panel1024x768 0x02
+#define Panel1024x768x75 0x22
+#define Panel1280x1024 0x03
+#define Panel1280x1024x75 0x23
+#define Panel640x480 0x04
+#define Panel1024x600 0x05
+#define Panel1152x864 0x06
+#define Panel1280x960 0x07
+#define Panel1152x768 0x08
+#define Panel1400x1050 0x09
+#define Panel1280x768 0x0A
+#define Panel1600x1200 0x0B
+
+#define PanelRef60Hz 0x00
+#define PanelRef75Hz 0x20
+#define LCDRGB18Bit 0x01
+
+#define ExtChipTrumpion 0x06
+#define ExtChipCH7005 0x08
+#define ExtChipMitacTV 0x0a
+#define LCDNonExpanding 0x10
+#define LCDNonExpandingShift 4
+#define LCDSync 0x20
+#define LCDSyncBit 0xe0
+#define LCDSyncShift 6
+
+/* #define DDC2DelayTime 300 */
+
+#define CRT2DisplayFlag 0x2000
+/* #define LCDDataLen 8 */
+/* #define HiTVDataLen 12 */
+/* #define TVDataLen 16 */
+/* #define SetPALTV 0x0100 */
+#define HalfDCLK 0x1000
+#define NTSCHT 1716
+#define NTSCVT 525
+#define PALHT 1728
+#define PALVT 625
+#define StHiTVHT 892
+#define StHiTVVT 1126
+#define StHiTextTVHT 1000
+#define StHiTextTVVT 1126
+#define ExtHiTVHT 2100
+#define ExtHiTVVT 1125
+
+#define St750pTVHT 1716
+#define St750pTVVT 525
+#define Ext750pTVHT 1716
+#define Ext750pTVVT 525
+#define St525pTVHT 1716
+#define St525pTVVT 525
+#define Ext525pTVHT 1716
+#define Ext525pTVVT 525
+#define St525iTVHT 1716
+#define St525iTVVT 525
+#define Ext525iTVHT 1716
+#define Ext525iTVVT 525
+
+#define VCLKStartFreq 25
+#define SoftDramType 0x80
+#define VCLK40 0x04
+
+#define VCLK162 0x21
+
+#define LCDRGB18Bit 0x01
+#define LoadDACFlag 0x1000
+#define AfterLockCRT2 0x4000
+#define SetCRT2ToAVIDEO 0x0004
+#define SetCRT2ToSCART 0x0010
+#define Ext2StructSize 5
+
+
+#define YPbPr525iVCLK 0x03B
+#define YPbPr525iVCLK_2 0x03A
+
+#define SwitchToCRT2 0x0002
+/* #define LCDVESATiming 0x08 */
+#define SetSCARTOutput 0x01
+#define AVIDEOSense 0x01
+#define SVIDEOSense 0x02
+#define SCARTSense 0x04
+#define LCDSense 0x08
+#define Monitor1Sense 0x20
+#define Monitor2Sense 0x10
+#define HiTVSense 0x40
+#define BoardTVType 0x02
+#define HotPlugFunction 0x08
+#define StStructSize 0x06
+
+
+#define XGI_CRT2_PORT_00 0x00 - 0x030
+#define XGI_CRT2_PORT_04 0x04 - 0x030
+#define XGI_CRT2_PORT_10 0x10 - 0x30
+#define XGI_CRT2_PORT_12 0x12 - 0x30
+#define XGI_CRT2_PORT_14 0x14 - 0x30
+
+
+#define LCDNonExpanding 0x10
+#define ADR_CRT2PtrData 0x20E
+#define offset_Zurac 0x210
+#define ADR_LVDSDesPtrData 0x212
+#define ADR_LVDSCRT1DataPtr 0x214
+#define ADR_CHTVVCLKPtr 0x216
+#define ADR_CHTVRegDataPtr 0x218
+
+#define LVDSDataLen 6
+/* #define EnableLVDSDDA 0x10 */
+/* #define LVDSDesDataLen 3 */
+#define ActiveNonExpanding 0x40
+#define ActiveNonExpandingShift 6
+/* #define ActivePAL 0x20 */
+#define ActivePALShift 5
+/* #define ModeSwitchStatus 0x0F */
+#define SoftTVType 0x40
+#define SoftSettingAddr 0x52
+#define ModeSettingAddr 0x53
+
+/* #define SelectCRT1Rate 0x4 */
+
+#define _PanelType00 0x00
+#define _PanelType01 0x08
+#define _PanelType02 0x10
+#define _PanelType03 0x18
+#define _PanelType04 0x20
+#define _PanelType05 0x28
+#define _PanelType06 0x30
+#define _PanelType07 0x38
+#define _PanelType08 0x40
+#define _PanelType09 0x48
+#define _PanelType0A 0x50
+#define _PanelType0B 0x58
+#define _PanelType0C 0x60
+#define _PanelType0D 0x68
+#define _PanelType0E 0x70
+#define _PanelType0F 0x78
+
+
+#define PRIMARY_VGA 0 /* 1: XGI is primary vga 0:XGI is secondary vga */
+#define BIOSIDCodeAddr 0x235
+#define OEMUtilIDCodeAddr 0x237
+#define VBModeIDTableAddr 0x239
+#define OEMTVPtrAddr 0x241
+#define PhaseTableAddr 0x243
+#define NTSCFilterTableAddr 0x245
+#define PALFilterTableAddr 0x247
+#define OEMLCDPtr_1Addr 0x249
+#define OEMLCDPtr_2Addr 0x24B
+#define LCDHPosTable_1Addr 0x24D
+#define LCDHPosTable_2Addr 0x24F
+#define LCDVPosTable_1Addr 0x251
+#define LCDVPosTable_2Addr 0x253
+#define OEMLCDPIDTableAddr 0x255
+
+#define VBModeStructSize 5
+#define PhaseTableSize 4
+#define FilterTableSize 4
+#define LCDHPosTableSize 7
+#define LCDVPosTableSize 5
+#define OEMLVDSPIDTableSize 4
+#define LVDSHPosTableSize 4
+#define LVDSVPosTableSize 6
+
+#define VB_ModeID 0
+#define VB_TVTableIndex 1
+#define VB_LCDTableIndex 2
+#define VB_LCDHIndex 3
+#define VB_LCDVIndex 4
+
+#define OEMLCDEnable 0x0001
+#define OEMLCDDelayEnable 0x0002
+#define OEMLCDPOSEnable 0x0004
+#define OEMTVEnable 0x0100
+#define OEMTVDelayEnable 0x0200
+#define OEMTVFlickerEnable 0x0400
+#define OEMTVPhaseEnable 0x0800
+#define OEMTVFilterEnable 0x1000
+
+#define OEMLCDPanelIDSupport 0x0080
+
+/* #define LCDVESATiming 0x0001 //LCD Info CR37 */
+/* #define EnableLVDSDDA 0x0002 */
+#define EnableScalingLCD 0x0008
+#define SetPWDEnable 0x0004
+#define SetLCDtoNonExpanding 0x0010
+/* #define SetLCDPolarity 0x00E0 */
+#define SetLCDDualLink 0x0100
+#define SetLCDLowResolution 0x0200
+#define SetLCDStdMode 0x0400
+#define SetTVStdMode 0x0200
+#define SetTVLowResolution 0x0400
+/* =============================================================
+ for 310
+============================================================== */
+#define SoftDRAMType 0x80
+#define SoftSetting_OFFSET 0x52
+#define SR07_OFFSET 0x7C
+#define SR15_OFFSET 0x7D
+#define SR16_OFFSET 0x81
+#define SR17_OFFSET 0x85
+#define SR19_OFFSET 0x8D
+#define SR1F_OFFSET 0x99
+#define SR21_OFFSET 0x9A
+#define SR22_OFFSET 0x9B
+#define SR23_OFFSET 0x9C
+#define SR24_OFFSET 0x9D
+#define SR25_OFFSET 0x9E
+#define SR31_OFFSET 0x9F
+#define SR32_OFFSET 0xA0
+#define SR33_OFFSET 0xA1
+
+#define CR40_OFFSET 0xA2
+#define SR25_1_OFFSET 0xF6
+#define CR49_OFFSET 0xF7
+
+#define VB310Data_1_2_Offset 0xB6
+#define VB310Data_4_D_Offset 0xB7
+#define VB310Data_4_E_Offset 0xB8
+#define VB310Data_4_10_Offset 0xBB
+
+#define RGBSenseDataOffset 0xBD
+#define YCSenseDataOffset 0xBF
+#define VideoSenseDataOffset 0xC1
+#define OutputSelectOffset 0xF3
+
+#define ECLK_MCLK_DISTANCE 0x14
+#define VBIOSTablePointerStart 0x200
+#define StandTablePtrOffset VBIOSTablePointerStart+0x02
+#define EModeIDTablePtrOffset VBIOSTablePointerStart+0x04
+#define CRT1TablePtrOffset VBIOSTablePointerStart+0x06
+#define ScreenOffsetPtrOffset VBIOSTablePointerStart+0x08
+#define VCLKDataPtrOffset VBIOSTablePointerStart+0x0A
+#define MCLKDataPtrOffset VBIOSTablePointerStart+0x0E
+#define CRT2PtrDataPtrOffset VBIOSTablePointerStart+0x10
+#define TVAntiFlickPtrOffset VBIOSTablePointerStart+0x12
+#define TVDelayPtr1Offset VBIOSTablePointerStart+0x14
+#define TVPhaseIncrPtr1Offset VBIOSTablePointerStart+0x16
+#define TVYFilterPtr1Offset VBIOSTablePointerStart+0x18
+#define LCDDelayPtr1Offset VBIOSTablePointerStart+0x20
+#define TVEdgePtr1Offset VBIOSTablePointerStart+0x24
+#define CRT2Delay1Offset VBIOSTablePointerStart+0x28
+#define LCDDataDesOffset VBIOSTablePointerStart-0x02
+#define LCDDataPtrOffset VBIOSTablePointerStart+0x2A
+#define LCDDesDataPtrOffset VBIOSTablePointerStart+0x2C
+#define LCDDataList VBIOSTablePointerStart+0x22 /* add for GetLCDPtr */
+#define TVDataList VBIOSTablePointerStart+0x36 /* add for GetTVPtr */
+/* */
+/* Modify from 310.inc */
+/* */
+/* */
+
+
+#define ShowMsgFlag 0x20 /* SoftSetting */
+#define ShowVESAFlag 0x10
+#define HotPlugFunction 0x08
+#define ModeSoftSetting 0x04
+#define TVSoftSetting 0x02
+#define LCDSoftSetting 0x01
+
+#define GatingCRTinLCDA 0x10
+#define SetHiTVOutput 0x08
+#define SetYPbPrOutput 0x04
+#define BoardTVType 0x02
+#define SetSCARTOutput 0x01
+
+#define ModeSettingYPbPr 0x02 /* TVModeSetting, Others as same as CR30 */
+
+/* TVModeSetting same as CR35 */
+
+/* LCDModeSetting same as CR37 */
+
+#define EnableNewTVFont 0x10 /* MiscCapability */
+
+#define EnableLCDOutput 0x80 /* LCDCfgSetting */
+
+#define SoftDRAMType 0x80 /* DRAMSetting */
+#define SoftDRAMConfig 0x40
+#define MosSelDRAMType 0x20
+#define SDRAM 000h
+#define SGRAM 0x01
+#define ESDRAM 0x02
+
+#define EnableAGPCfgSetting 0x01 /* AGPCfgSetting */
+
+/* ---------------- SetMode Stack */
+#define CRT1Len 15
+#define VCLKLen 4
+#define DefThreshold 0x0100
+#define ExtRegsSize (57+8+37+70+63+28+768+1)/64+1
+
+#define VGA_XGI315 0x0001 /* VGA Type Info */
+#define VGA_SNewis315e 0x0002 /* 315 series */
+#define VGA_XGI550 0x0004
+#define VGA_XGI640 0x0008
+#define VGA_XGI740 0x0010
+#define VGA_XGI650 0x0020
+#define VGA_XGI650M 0x0040
+#define VGA_XGI651 0x0080
+#define VGA_XGI340 0x0001 /* 340 series */
+#define VGA_XGI330 0x0001 /* 330 series */
+#define VGA_XGI660 0x0001 /* 660 series */
+
+#define VB_XGI301 0x0001 /* VB Type Info */
+#define VB_XGI301B 0x0002 /* 301 series */
+#define VB_XGI302B 0x0004
+#define VB_NoLCD 0x8000
+#define VB_XGI301LV 0x0008
+#define VB_XGI302LV 0x0010
+#define VB_LVDS_NS 0x0001 /* 3rd party chip */
+#define VB_CH7017 0x0002
+#define VB_CH7007 0x0080 /* [Billy] 07/05/03 */
+/* #define VB_LVDS_SI 0x0004 */
+
+#define ModeInfoFlag 0x0007
+#define IsTextMode 0x0007
+#define ModeText 0x0000
+#define ModeCGA 0x0001
+#define ModeEGA 0x0002 /* 16 colors mode */
+#define ModeVGA 0x0003 /* 256 colors mode */
+#define Mode15Bpp 0x0004 /* 15 Bpp Color Mode */
+#define Mode16Bpp 0x0005 /* 16 Bpp Color Mode */
+#define Mode24Bpp 0x0006 /* 24 Bpp Color Mode */
+#define Mode32Bpp 0x0007 /* 32 Bpp Color Mode */
+
+#define DACInfoFlag 0x0018
+#define MONODAC 0x0000
+#define CGADAC 0x0008
+#define EGADAC 0x0010
+#define VGADAC 0x0018
+
+#define MemoryInfoFlag 0x01e0
+#define MemorySizeShift 5
+#define Need1MSize 0x0000
+#define Need2MSize 0x0020
+#define Need4MSize 0x0060
+#define Need8MSize 0x00e0
+#define Need16MSize 0x01e0
+
+#define Charx8Dot 0x0200
+#define LineCompareOff 0x0400
+#define CRT2Mode 0x0800
+#define HalfDCLK 0x1000
+#define NoSupportSimuTV 0x2000
+#define DoubleScanMode 0x8000
+
+/* -------------- Ext_InfoFlag */
+#define SupportModeInfo 0x0007
+#define Support256 0x0003
+#define Support15Bpp 0x0004
+#define Support16Bpp 0x0005
+#define Support24Bpp 0x0006
+#define Support32Bpp 0x0007
+
+#define SupportAllCRT2 0x0078
+#define SupportTV 0x0008
+#define SupportHiVisionTV 0x0010
+#define SupportLCD 0x0020
+#define SupportRAMDAC2 0x0040
+#define NoSupportTV 0x0070
+#define NoSupportHiVisionTV 0x0060
+#define NoSupportLCD 0x0058
+#define SupportTV1024 0x0800 /* 301btest */
+#define SupportYPbPr 0x1000 /* 301lv */
+#define InterlaceMode 0x0080
+#define SyncPP 0x0000
+#define SyncPN 0x4000
+#define SyncNP 0x8000
+#define SyncNN 0xC000
+
+/* -------------- SetMode Stack/Scratch */
+#define SetSimuScanMode 0x0001 /* VBInfo/CR30 & CR31 */
+#define SwitchToCRT2 0x0002
+#define SetCRT2ToTV1 0x009C
+#define SetCRT2ToTV 0x089C
+#define SetCRT2ToAVIDEO 0x0004
+#define SetCRT2ToSVIDEO 0x0008
+#define SetCRT2ToSCART 0x0010
+#define SetCRT2ToLCD 0x0020
+#define SetCRT2ToRAMDAC 0x0040
+#define SetCRT2ToHiVisionTV 0x0080
+#define SetCRT2ToLCDA 0x0100
+#define SetInSlaveMode 0x0200
+#define SetNotSimuMode 0x0400
+#define HKEventMode 0x0800
+#define SetCRT2ToYPbPr 0x0800
+#define LoadDACFlag 0x1000
+#define DisableCRT2Display 0x2000
+#define DriverMode 0x4000
+#define SetCRT2ToDualEdge 0x8000
+#define HotKeySwitch 0x8000
+
+#define ProgrammingCRT2 0x0001 /* Set Flag */
+#define EnableVCMode 0x0002
+#define SetHKEventMode 0x0004
+#define ReserveTVOption 0x0008
+#define DisableRelocateIO 0x0010
+#define Win9xDOSMode 0x0020
+#define JDOSMode 0x0040
+/* #define SetWin9xforJap 0x0080 // not used now */
+/* #define SetWin9xforKorea 0x0100 // not used now */
+#define GatingCRT 0x0800
+#define DisableChB 0x1000
+#define EnableChB 0x2000
+#define DisableChA 0x4000
+#define EnableChA 0x8000
+
+#define SetNTSCTV 0x0000 /* TV Info */
+#define SetPALTV 0x0001
+#define SetNTSCJ 0x0002
+#define SetPALMTV 0x0004
+#define SetPALNTV 0x0008
+#define SetCHTVUnderScan 0x0000
+/* #define SetCHTVOverScan 0x0010 */
+#define SetYPbPrMode525i 0x0020
+#define SetYPbPrMode525p 0x0040
+#define SetYPbPrMode750p 0x0080
+#define SetYPbPrMode1080i 0x0100
+#define SetTVStdMode 0x0200
+#define SetTVLowResolution 0x0400
+#define SetTVSimuMode 0x0800
+#define TVSimuMode 0x0800
+#define RPLLDIV2XO 0x1000
+#define NTSC1024x768 0x2000
+#define SetTVLockMode 0x4000
+
+#define LCDVESATiming 0x0001 /* LCD Info/CR37 */
+#define EnableLVDSDDA 0x0002
+#define EnableScalingLCD 0x0008
+#define SetPWDEnable 0x0004
+#define SetLCDtoNonExpanding 0x0010
+#define SetLCDPolarity 0x00e0
+#define SetLCDDualLink 0x0100
+#define SetLCDLowResolution 0x0200
+#define SetLCDStdMode 0x0400
+
+#define DefaultLCDCap 0x80ea /* LCD Capability shampoo */
+#define RLVDSDHL00 0x0000
+#define RLVDSDHL01 0x0001
+#define RLVDSDHL10 0x0002 /* default */
+#define RLVDSDHL11 0x0003
+#define EnableLCD24bpp 0x0004 /* default */
+#define DisableLCD24bpp 0x0000
+#define RLVDSClkSFT0 0x0000
+#define RLVDSClkSFT1 0x0008 /* default */
+#define EnableLVDSDCBal 0x0010
+#define DisableLVDSDCBal 0x0000 /* default */
+#define SinglePolarity 0x0020 /* default */
+#define MultiPolarity 0x0000
+#define LCDPolarity 0x00c0 /* default: SyncNN */
+#define LCDSingleLink 0x0000 /* default */
+#define LCDDualLink 0x0100
+#define EnableSpectrum 0x0200
+#define DisableSpectrum 0x0000 /* default */
+#define PWDEnable 0x0400
+#define PWDDisable 0x0000 /* default */
+#define PWMEnable 0x0800
+#define PWMDisable 0x0000 /* default */
+#define EnableVBCLKDRVLOW 0x4000
+#define EnableVBCLKDRVHigh 0x0000 /* default */
+#define EnablePLLSPLOW 0x8000
+#define EnablePLLSPHigh 0x0000 /* default */
+
+#define LCDBToA 0x20 /* LCD SetFlag */
+#define StLCDBToA 0x40
+#define LockLCDBToA 0x80
+#define LCDToFull 0x10
+#define AVIDEOSense 0x01 /* CR32 */
+#define SVIDEOSense 0x02
+#define SCARTSense 0x04
+#define LCDSense 0x08
+#define Monitor2Sense 0x10
+#define Monitor1Sense 0x20
+#define HiTVSense 0x40
+
+#ifdef NewScratch
+#define YPbPrSense 0x80 /* NEW SCRATCH */
+#endif
+
+#define TVSense 0xc7
+
+#define TVOverScan 0x10 /* CR35 */
+#define TVOverScanShift 4
+
+#ifdef NewScratch
+#define NTSCMode 0x00
+#define PALMode 0x00
+#define NTSCJMode 0x02
+#define PALMNMode 0x0c
+#define YPbPrMode 0xe0
+#define YPbPrMode525i 0x00
+#define YPbPrMode525p 0x20
+#define YPbPrMode750p 0x40
+#define YPbPrMode1080i 0x60
+#else /* Old Scratch */
+#define ClearBufferFlag 0x20
+#endif
+
+
+#define LCDRGB18Bit 0x01 /* CR37 */
+#define LCDNonExpanding 0x10
+#define LCDNonExpandingShift 4
+#define LCDSync 0x20
+#define LCDSyncBit 0xe0 /* H/V polarity & sync ID */
+#define LCDSyncShift 6
+
+#ifdef NewScratch
+#define ScalingLCD 0x08
+#else /* Old Scratch */
+#define ExtChipType 0x0e
+#define ExtChip301 0x02
+#define ExtChipLVDS 0x04
+#define ExtChipCH7019 0x06
+#define ScalingLCD 0x10
+#endif
+
+#define EnableDualEdge 0x01 /* CR38 */
+#define SetToLCDA 0x02
+#ifdef NewScratch
+#define SetYPbPr 0x04
+#define DisableChannelA 0x08
+#define DisableChannelB 0x10
+#define ExtChipType 0xe0
+#define ExtChip301 0x20
+#define ExtChipLVDS 0x40
+#define ExtChipCH7019 0x60
+#else /* Old Scratch */
+#define YPbPrSense 0x04
+#define SetYPbPr 0x08
+#define YPbPrMode 0x30
+#define YPbPrMode525i 0x00
+#define YPbPrMode525p 0x10
+#define YPbPrMode750p 0x20
+#define YPbPrMode1080i 0x30
+#define PALMNMode 0xc0
+#endif
+
+#define BacklightControlBit 0x01 /* CR3A */
+#define Win9xforJap 0x40
+#define Win9xforKorea 0x80
+
+#define ForceMDBits 0x07 /* CR3B */
+#define ForceMD_JDOS 0x00
+#define ForceMD_640x400T 0x01
+#define ForceMD_640x350T 0x02
+#define ForceMD_720x400T 0x03
+#define ForceMD_640x480E 0x04
+#define ForceMD_640x400E 0x05
+#define ForceP1Bit 0x10
+#define ForceP2Bit 0x20
+#define EnableForceMDinBIOS 0x40
+#define EnableForceMDinDrv 0x80
+
+#ifdef NewScratch /* New Scratch */
+/* ---------------------- VUMA Information */
+#define LCDSettingFromCMOS 0x04 /* CR3C */
+#define TVSettingFromCMOS 0x08
+#define DisplayDeviceFromCMOS 0x10
+#define HKSupportInSBIOS 0x20
+#define OSDSupportInSBIOS 0x40
+#define DisableLogo 0x80
+
+/* ---------------------- HK Evnet Definition */
+#define HKEvent 0x0f /* CR3D */
+#define HK_ModeSwitch 0x01
+#define HK_Expanding 0x02
+#define HK_OverScan 0x03
+#define HK_Brightness 0x04
+#define HK_Contrast 0x05
+#define HK_Mute 0x06
+#define HK_Volume 0x07
+#define ModeSwitchStatus 0xf0
+#define ActiveCRT1 0x10
+#define ActiveLCD 0x0020
+#define ActiveTV 0x40
+#define ActiveCRT2 0x80
+
+#define TVSwitchStatus 0x1f /* CR3E */
+#define ActiveAVideo 0x01
+#define ActiveSVideo 0x02
+#define ActiveSCART 0x04
+#define ActiveHiTV 0x08
+#define ActiveYPbPr 0x10
+
+#define EnableHKEvent 0x01 /* CR3F */
+#define EnableOSDEvent 0x02
+#define StartOSDEvent 0x04
+#define IgnoreHKEvent 0x08
+#define IgnoreOSDEvent 0x10
+#else /* Old Scratch */
+#define OSD_SBIOS 0x02 /* SR17 */
+#define DisableLogo 0x04
+#define SelectKDOS 0x08
+#define KorWinMode 0x10
+#define KorMode3Bit 0x0020
+#define PSCCtrlBit 0x40
+#define NPSCCtrlBitShift 6
+#define BlueScreenBit 0x80
+
+#define HKEvent 0x0f /* CR79 */
+#define HK_ModeSwitch 0x01
+#define HK_Expanding 0x02
+#define HK_OverScan 0x03
+#define HK_Brightness 0x04
+#define HK_Contrast 0x05
+#define HK_Mute 0x06
+#define HK_Volume 0x07
+#define ActivePAL 0x0020
+#define ActivePALShift 5
+#define ActiveNonExpanding 0x40
+#define ActiveNonExpandingShift 6
+#define ActiveOverScan 0x80
+#define ActiveOverScanShift 7
+
+#define ModeSwitchStatus 0x0b /* SR15 */
+#define ActiveCRT1 0x01
+#define ActiveLCD 0x02
+#define ActiveCRT2 0x08
+
+#define TVSwitchStatus 0xf0 /* SR16 */
+#define TVConfigShift 3
+#define ActiveTV 0x01
+#define ActiveYPbPr 0x04
+#define ActiveAVideo 0x10
+#define ActiveSVideo 0x0020
+#define ActiveSCART 0x40
+#define ActiveHiTV 0x80
+
+#define EnableHKEvent 0x01 /* CR7A */
+#define EnableOSDEvent 0x02
+#define StartOSDEvent 0x04
+#define CMOSSupport 0x08
+#define HotKeySupport 0x10
+#define IngoreHKOSDEvent 0x20
+#endif
+
+/* //------------- Misc. Definition */
+#define SelectCRT1Rate 00h
+/* #define SelectCRT2Rate 04h */
+
+#define DDC1DelayTime 1000
+#ifdef TRUMPION
+#define DDC2DelayTime 15
+#else
+#define DDC2DelayTime 150
+#endif
+
+#define R_FACTOR 04Dh
+#define G_FACTOR 097h
+#define B_FACTOR 01Ch
+/* --------------------------------------------------------- */
+/* translated from asm code 301def.h */
+/* */
+/* --------------------------------------------------------- */
+#define LCDDataLen 8
+#define HiTVDataLen 12
+#define TVDataLen 12
+#define LVDSCRT1Len_H 8
+#define LVDSCRT1Len_V 7
+#define LVDSDataLen 6
+#define LVDSDesDataLen 6
+#define LCDDesDataLen 6
+#define LVDSDesDataLen2 8
+#define LCDDesDataLen2 8
+#define CHTVRegLen 16
+#define CHLVRegLen 12
+
+#define StHiTVHT 892
+#define StHiTVVT 1126
+#define StHiTextTVHT 1000
+#define StHiTextTVVT 1126
+#define ExtHiTVHT 2100
+#define ExtHiTVVT 1125
+#define NTSCHT 1716
+#define NTSCVT 525
+#define NTSC1024x768HT 1908
+#define NTSC1024x768VT 525
+#define PALHT 1728
+#define PALVT 625
+
+#define YPbPrTV525iHT 1716 /* YPbPr */
+#define YPbPrTV525iVT 525
+#define YPbPrTV525pHT 1716
+#define YPbPrTV525pVT 525
+#define YPbPrTV750pHT 1650
+#define YPbPrTV750pVT 750
+
+#define CRT2VCLKSel 0xc0
+
+#define CRT2Delay1 0x04 /* XGI301 */
+#define CRT2Delay2 0x0A /* 301B,302 */
+
+
+#define VCLK25_175 0x00
+#define VCLK28_322 0x01
+#define VCLK31_5 0x02
+#define VCLK36 0x03
+#define VCLK40 0x04
+#define VCLK43_163 0x05
+#define VCLK44_9 0x06
+#define VCLK49_5 0x07
+#define VCLK50 0x08
+#define VCLK52_406 0x09
+#define VCLK56_25 0x0A
+#define VCLK65 0x0B
+#define VCLK67_765 0x0C
+#define VCLK68_179 0x0D
+#define VCLK72_852 0x0E
+#define VCLK75 0x0F
+#define VCLK75_8 0x10
+#define VCLK78_75 0x11
+#define VCLK79_411 0x12
+#define VCLK83_95 0x13
+#define VCLK84_8 0x14
+#define VCLK86_6 0x15
+#define VCLK94_5 0x16
+#define VCLK104_998 0x17
+#define VCLK105_882 0x18
+#define VCLK108_2 0x19
+#define VCLK109_175 0x1A
+#define VCLK113_309 0x1B
+#define VCLK116_406 0x1C
+#define VCLK132_258 0x1D
+#define VCLK135_5 0x1E
+#define VCLK139_054 0x1F
+#define VCLK157_5 0x20
+#define VCLK162 0x21
+#define VCLK175 0x22
+#define VCLK189 0x23
+#define VCLK194_4 0x24
+#define VCLK202_5 0x25
+#define VCLK229_5 0x26
+#define VCLK234 0x27
+#define VCLK252_699 0x28
+#define VCLK254_817 0x29
+#define VCLK265_728 0x2A
+#define VCLK266_952 0x2B
+#define VCLK269_655 0x2C
+#define VCLK272_042 0x2D
+#define VCLK277_015 0x2E
+#define VCLK286_359 0x2F
+#define VCLK291_132 0x30
+#define VCLK291_766 0x31
+#define VCLK309_789 0x32
+#define VCLK315_195 0x33
+#define VCLK323_586 0x34
+#define VCLK330_615 0x35
+#define VCLK332_177 0x36
+#define VCLK340_477 0x37
+#define VCLK375_847 0x38
+#define VCLK388_631 0x39
+#define VCLK125_999 0x51
+#define VCLK148_5 0x52
+#define VCLK178_992 0x54
+#define VCLK217_325 0x55
+#define VCLK299_505 0x56
+#define YPbPr750pVCLK 0x57
+
+#define TVVCLKDIV2 0x3A
+#define TVVCLK 0x3B
+#define HiTVVCLKDIV2 0x3C
+#define HiTVVCLK 0x3D
+#define HiTVSimuVCLK 0x3E
+#define HiTVTextVCLK 0x3F
+#define VCLK39_77 0x40
+/* #define YPbPr750pVCLK 0x0F */
+#define YPbPr525pVCLK 0x3A
+/* #define ;;YPbPr525iVCLK 0x3B */
+/* #define ;;YPbPr525iVCLK_2 0x3A */
+#define NTSC1024VCLK 0x41
+#define VCLK25_175_41 0x42 /* ; ScaleLCD */
+#define VCLK25_175_42 0x43
+#define VCLK28_322_43 0x44
+#define VCLK40_44 0x45
+#define VCLKQVGA_1 0x46 /* ; QVGA */
+#define VCLKQVGA_2 0x47
+#define VCLKQVGA_3 0x48
+#define VCLK35_2 0x49 /* ; 800x480 */
+#define VCLK122_61 0x4A
+#define VCLK80_350 0x4B
+#define VCLK107_385 0x4C
+
+#define CHTVVCLK30_2 0x50 /* ;;CHTV */
+#define CHTVVCLK28_1 0x51
+#define CHTVVCLK43_6 0x52
+#define CHTVVCLK26_4 0x53
+#define CHTVVCLK24_6 0x54
+#define CHTVVCLK47_8 0x55
+#define CHTVVCLK31_5 0x56
+#define CHTVVCLK26_2 0x57
+#define CHTVVCLK39 0x58
+#define CHTVVCLK36 0x59
+
+#define CH7007TVVCLK30_2 0x00 /* [Billy] 2007/05/18 For CH7007 */
+#define CH7007TVVCLK28_1 0x01
+#define CH7007TVVCLK43_6 0x02
+#define CH7007TVVCLK26_4 0x03
+#define CH7007TVVCLK24_6 0x04
+#define CH7007TVVCLK47_8 0x05
+#define CH7007TVVCLK31_5 0x06
+#define CH7007TVVCLK26_2 0x07
+#define CH7007TVVCLK39 0x08
+#define CH7007TVVCLK36 0x09
+
+#define RES320x200 0x00
+#define RES320x240 0x01
+#define RES400x300 0x02
+#define RES512x384 0x03
+#define RES640x400 0x04
+#define RES640x480x60 0x05
+#define RES640x480x72 0x06
+#define RES640x480x75 0x07
+#define RES640x480x85 0x08
+#define RES640x480x100 0x09
+#define RES640x480x120 0x0A
+#define RES640x480x160 0x0B
+#define RES640x480x200 0x0C
+#define RES800x600x56 0x0D
+#define RES800x600x60 0x0E
+#define RES800x600x72 0x0F
+#define RES800x600x75 0x10
+#define RES800x600x85 0x11
+#define RES800x600x100 0x12
+#define RES800x600x120 0x13
+#define RES800x600x160 0x14
+#define RES1024x768x43 0x15
+#define RES1024x768x60 0x16
+#define RES1024x768x70 0x17
+#define RES1024x768x75 0x18
+#define RES1024x768x85 0x19
+#define RES1024x768x100 0x1A
+#define RES1024x768x120 0x1B
+#define RES1280x1024x43 0x1C
+#define RES1280x1024x60 0x1D
+#define RES1280x1024x75 0x1E
+#define RES1280x1024x85 0x1F
+#define RES1600x1200x60 0x20
+#define RES1600x1200x65 0x21
+#define RES1600x1200x70 0x22
+#define RES1600x1200x75 0x23
+#define RES1600x1200x85 0x24
+#define RES1600x1200x100 0x25
+#define RES1600x1200x120 0x26
+#define RES1920x1440x60 0x27
+#define RES1920x1440x65 0x28
+#define RES1920x1440x70 0x29
+#define RES1920x1440x75 0x2A
+#define RES1920x1440x85 0x2B
+#define RES1920x1440x100 0x2C
+#define RES2048x1536x60 0x2D
+#define RES2048x1536x65 0x2E
+#define RES2048x1536x70 0x2F
+#define RES2048x1536x75 0x30
+#define RES2048x1536x85 0x31
+#define RES800x480x60 0x32
+#define RES800x480x75 0x33
+#define RES800x480x85 0x34
+#define RES1024x576x60 0x35
+#define RES1024x576x75 0x36
+#define RES1024x576x85 0x37
+#define RES1280x720x60 0x38
+#define RES1280x720x75 0x39
+#define RES1280x720x85 0x3A
+#define RES1280x960x60 0x3B
+#define RES720x480x60 0x3C
+#define RES720x576x56 0x3D
+#define RES856x480x79I 0x3E
+#define RES856x480x60 0x3F
+#define RES1280x768x60 0x40
+#define RES1400x1050x60 0x41
+#define RES1152x864x60 0x42
+#define RES1152x864x75 0x43
+#define RES1024x768x160 0x44
+#define RES1280x960x75 0x45
+#define RES1280x960x85 0x46
+#define RES1280x960x120 0x47
+
+#define LFBDRAMTrap 0x30
+#endif
diff --git a/drivers/staging/xgifb/vb_ext.c b/drivers/staging/xgifb/vb_ext.c
new file mode 100644
index 0000000..49b39ee
--- /dev/null
+++ b/drivers/staging/xgifb/vb_ext.c
@@ -0,0 +1,1370 @@
+#include "osdef.h"
+
+
+
+
+#ifdef WIN2000
+
+#include <dderror.h>
+#include <devioctl.h>
+#include <miniport.h>
+#include <ntddvdeo.h>
+#include <video.h>
+#include "xgiv.h"
+#include "dd_i2c.h"
+#include "tools.h"
+#endif /* WIN2000 */
+
+#ifdef LINUX_XF86
+#include "xf86.h"
+#include "xf86PciInfo.h"
+#include "xgi.h"
+#include "xgi_regs.h"
+#endif
+
+#ifdef LINUX_KERNEL
+#include <linux/version.h>
+#include <asm/io.h>
+#include <linux/types.h>
+#include "XGIfb.h"
+/*#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+#include <video/XGIfb.h>
+#else
+#include <linux/XGIfb.h>
+#endif*/
+#endif
+
+
+
+#include "vb_def.h"
+#include "vgatypes.h"
+#include "vb_struct.h"
+#include "vb_util.h"
+#include "vb_setmode.h"
+#include "vb_ext.h"
+extern UCHAR XGI330_SoftSetting;
+extern UCHAR XGI330_OutputSelect;
+extern USHORT XGI330_RGBSenseData2;
+extern USHORT XGI330_YCSenseData2;
+extern USHORT XGI330_VideoSenseData2;
+#ifdef WIN2000
+extern UCHAR SenseCHTV(PHW_DEVICE_EXTENSION pHWDE); /* 2007/05/17 Billy */
+#endif
+void XGI_GetSenseStatus( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo );
+BOOLEAN XGINew_GetPanelID(PVB_DEVICE_INFO pVBInfo);
+USHORT XGINew_SenseLCD(PXGI_HW_DEVICE_INFO,PVB_DEVICE_INFO pVBInfo);
+BOOLEAN XGINew_GetLCDDDCInfo(PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
+void XGISetDPMS( PXGI_HW_DEVICE_INFO pXGIHWDE , ULONG VESA_POWER_STATE ) ;
+BOOLEAN XGINew_BridgeIsEnable(PXGI_HW_DEVICE_INFO,PVB_DEVICE_INFO pVBInfo );
+BOOLEAN XGINew_Sense(USHORT tempbx,USHORT tempcx, PVB_DEVICE_INFO pVBInfo);
+BOOLEAN XGINew_SenseHiTV( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo ) ;
+
+/**************************************************************
+ Dynamic Sense
+*************************************************************/
+
+void XGI_WaitDisplay(void);
+BOOLEAN XGI_Is301C(PVB_DEVICE_INFO);
+BOOLEAN XGI_Is301LV(PVB_DEVICE_INFO);
+
+#ifdef WIN2000
+UCHAR XGI_SenseLCD(PHW_DEVICE_EXTENSION, PVB_DEVICE_INFO);
+UCHAR XGI_GetLCDDDCInfo(PHW_DEVICE_EXTENSION,PVB_DEVICE_INFO);
+
+extern BOOL bGetDdcInfo(
+PHW_DEVICE_EXTENSION pHWDE,
+ULONG ulWhichOne,
+PUCHAR pjQueryBuffer,
+ULONG ulBufferSize
+ );
+
+#endif
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_Is301B */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGINew_Is301B( PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT flag ;
+
+ flag = XGINew_GetReg1( pVBInfo->Part4Port , 0x01 ) ;
+
+ if ( flag > 0x0B0 )
+ return( 0 ) ; /* 301b */
+ else
+ return( 1 ) ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_Is301C */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_Is301C( PVB_DEVICE_INFO pVBInfo )
+{
+ if ( ( XGINew_GetReg1( pVBInfo->Part4Port , 0x01 ) & 0xF0 ) == 0xC0 )
+ return( 1 ) ;
+
+ if ( XGINew_GetReg1( pVBInfo->Part4Port , 0x01 ) >= 0xD0 )
+ {
+ if ( XGINew_GetReg1( pVBInfo->Part4Port , 0x39 ) == 0xE0 )
+ return( 1 ) ;
+ }
+
+ return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_Is301LV */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_Is301LV( PVB_DEVICE_INFO pVBInfo )
+{
+ if ( XGINew_GetReg1( pVBInfo->Part4Port , 0x01 ) >= 0xD0 )
+ {
+ if ( XGINew_GetReg1( pVBInfo->Part4Port , 0x39 ) == 0xFF )
+ {
+ return( 1 ) ;
+ }
+ }
+ return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_Sense */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGINew_Sense( USHORT tempbx , USHORT tempcx, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT temp , i , tempch ;
+
+ temp = tempbx & 0xFF ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x11 , temp ) ;
+ temp = ( tempbx & 0xFF00 ) >> 8 ;
+ temp |= ( tempcx & 0x00FF ) ;
+ XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x10 , ~0x1F , temp ) ;
+
+ for( i = 0 ; i < 10 ; i++ )
+ XGI_LongWait( pVBInfo) ;
+
+ tempch = ( tempcx & 0x7F00 ) >> 8 ;
+ temp = XGINew_GetReg1( pVBInfo->Part4Port , 0x03 ) ;
+ temp = temp ^ ( 0x0E ) ;
+ temp &= tempch ;
+
+ if ( temp > 0 )
+ return( 1 ) ;
+ else
+ return( 0 ) ;
+}
+
+#ifdef WIN2000
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SenseLCD */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGI_SenseLCD( PHW_DEVICE_EXTENSION pHWDE, PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT tempax , tempbx , tempcx ;
+ UCHAR SoftSetting = XGI330_SoftSetting ;
+
+ if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV ) )
+ return( 1 ) ;
+
+
+ if ( SoftSetting & HotPlugFunction ) /* Hot Plug Detection */
+ {
+ XGINew_SetRegAND( pVBInfo->Part4Port , 0x0F , 0x3F ) ;
+ tempbx = 0 ;
+ tempcx = 0x9010 ;
+ if ( XGINew_Sense( tempbx , tempcx, pVBInfo ) )
+ return( 1 ) ;
+
+ return( 0 ) ;
+ }
+ else /* Get LCD Info from EDID */
+ return(XGI_GetLCDDDCInfo(pHWDE, pVBInfo));
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLCDDDCInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGI_GetLCDDDCInfo( PHW_DEVICE_EXTENSION pHWDE , PVB_DEVICE_INFO pVBInfo)
+{
+ UCHAR tempah , tempbl , tempbh ;
+ USHORT tempbx , temp ;
+ UCHAR pjEDIDBuf[ 256 ] ;
+ ULONG ulBufferSize = 256 ;
+ UCHAR bMASK_OUTPUTSTATE_CRT2LCD = 2 ; /* 0423 shampoo */
+
+ bGetDdcInfo( pHWDE , MASK_OUTPUTSTATE_CRT2LCD , pjEDIDBuf , ulBufferSize ) ;
+ if ( ( *( ( PULONG )pjEDIDBuf ) == 0xFFFFFF00 ) && ( *( ( PULONG )( pjEDIDBuf + 4 ) ) == 0x00FFFFFF ) )
+ {
+ tempah = Panel1024x768 ;
+ tempbl=( *( pjEDIDBuf + 0x3A ) ) & 0xf0 ;
+
+ if ( tempbl != 0x40 )
+ {
+ tempah = Panel1600x1200 ;
+ if ( tempbl != 0x60 )
+ {
+ tempah = Panel1280x1024 ;
+ tempbh = ( *( pjEDIDBuf + 0x3B ) ) ;
+ if ( tempbh != 0x00 )
+ {
+ tempah = Panel1280x960 ;
+ if ( tempbh != 0x0C0 )
+ {
+ tempbx = ( ( *( pjEDIDBuf + 0x24 ) ) << 8 ) | ( *( pjEDIDBuf + 0x23 ) ) ;
+ tempah = Panel1280x1024 ;
+ if ( !( tempbx & 0x0100 ) )
+ {
+ tempah = Panel1024x768 ;
+ if ( !( tempbx & 0x0E00 ) )
+ {
+ tempah = Panel1280x1024 ;
+ }
+ }
+ }
+
+ if ( tempbx & 0x00FF )
+ {
+ temp = ScalingLCD ;
+ XGINew_SetRegOR( pVBInfo->P3d4 , 0x37 , temp ) ;
+ }
+ }
+ }
+ }
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x36 , ( ~0x07 ) , tempah ) ;
+ tempah = ( ( *( pjEDIDBuf + 0x47 ) ) & 0x06 ) ; /* Polarity */
+ tempah = ( tempah ^ 0x06 ) << 4 ;
+ tempah |= LCDSync ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x37 , ( ~LCDSyncBit ) , tempah ) ;
+ tempbh= XGINew_GetReg1( pVBInfo->P3d4 , 0x36 ) ;
+ tempbh &= 0x07 ;
+ if ( tempbh == Panel1280x960 )
+ XGINew_SetRegAND( pVBInfo->P3d4 , 0x37 , 0x0E ) ;
+ }
+ else if ( *pjEDIDBuf == 0x20 )
+ {
+ tempah = Panel1024x768 ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x36 , ( ~0x07 ) , tempah ) ;
+ }
+ else
+ {
+ return( 0 ) ;
+ }
+
+ return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DySense */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_DySense( PHW_DEVICE_EXTENSION pHWDE , PUCHAR ujConnectStatus)
+{
+ UCHAR pre_CRD,pre_SR1E , pre_Part2_0 , pre_Part4_D ;
+ USHORT tempax , tempbx , tempcx , pushax , temp ;
+ VB_DEVICE_INFO VBINF;
+ PVB_DEVICE_INFO pVBInfo = &VBINF;
+ UCHAR OutputSelect = XGI330_OutputSelect ;
+ PXGI_HW_DEVICE_INFO HwDeviceExtension= pHWDE->pXGIHWDE ;
+ UCHAR bConnectStatus = 0 ;
+ pVBInfo->BaseAddr = HwDeviceExtension->pjIOAddress ;
+ pVBInfo->ROMAddr = pHWDE->pjVirtualRomBase ;
+
+ pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+ pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+ pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+ pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+ pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+ pushax = XGINew_GetReg1( pVBInfo->P3d4 , 0x17 ) ; /* 0512 Fix Dysense hanged */
+ temp = ( pushax & 0x00FF ) | 0x80 ;
+ XGINew_SetRegOR( pVBInfo->P3d4 , 0x17 , temp ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x05 , 0x86 ) ;
+ /* beginning of dynamic sense CRT1 */
+
+ pVBInfo->IF_DEF_CH7007 = 0;
+ if (pHWDE->bCH7007)
+ {
+ InitTo330Pointer( pHWDE->pXGIHWDE->jChipType, pVBInfo ) ;
+ HwDeviceExtension->pDevice = (PVOID)pHWDE;
+ pVBInfo->IF_DEF_CH7007 = 1;
+ /* [Billy] 2007/05/14 For CH7007 */
+ if ( pVBInfo->IF_DEF_CH7007 == 1 )
+ {
+ bConnectStatus = SenseCHTV(HwDeviceExtension->pDevice) ; /* 07/05/28 */
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , ~0x03 , (UCHAR)bConnectStatus ) ;
+ }
+ }
+ if(( pHWDE->jChipID >= XG40 ) || ( pHWDE->jChipID >= XG20 ))
+ {
+
+ if ( pHWDE->jChipID >= XG40 )
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x57 , 0x4A ) ; /* write sense pattern 30->4a */
+ else
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x57 , 0x5F ) ; /* write sense pattern */
+
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x53 , 0xFF , 0x02 ) ; /* enable sense DAC */
+ XGI_WaitDisply(pVBInfo) ;
+
+ if(XGINew_GetReg2( pVBInfo->P3c2 ) & 0x10 )
+ bConnectStatus |= Monitor1Sense ;
+
+ XGINew_SetRegAND( pVBInfo->P3d4 , 0x53 , 0xFD ) ; /* disable sense DAC */
+ XGINew_SetRegAND( pVBInfo->P3d4 , 0x57 , 0x00 ) ; /* clear sense pattern */
+
+
+ /* ---------- End of dynamic sense CRT1 ----------- */
+
+ /* ---------- beginning of dynamic sense VB ------------ */
+ pre_SR1E = XGINew_GetReg1( pVBInfo->P3c4 , 0x1E ) ;
+ XGINew_SetRegOR( pVBInfo->P3c4 , 0x1E , 0x20 ) ; /* Enable CRT2,work-a-round for 301B/301LV/302LV */
+ pre_Part2_0 = XGINew_GetReg1( pVBInfo->Part2Port , 0x00 ) ;
+ pre_Part4_D = XGINew_GetReg1( pVBInfo->Part4Port , 0x0D ) ;
+
+ if ( XGI_Is301C( pVBInfo ) ) /* 301C only */
+ XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x0D , ~0x07 , 0x01 ) ; /* Set Part4 0x0D D[2:0] to 001b */
+
+ /* tempax = 0 ; */
+ if ( !XGI_Is301LV( pVBInfo ) )
+ {
+ tempbx = XGI330_RGBSenseData2 ;
+ tempcx = 0x0E08 ;
+ if(XGINew_Sense( tempbx , tempcx, pVBInfo ) )
+ {
+ bConnectStatus |= Monitor2Sense ;
+ if ( OutputSelect & SetSCARTOutput )
+ {
+ bConnectStatus ^= ( Monitor2Sense | SCARTSense ) ;
+ }
+ }
+ }
+ if ( XGI_Is301C( pVBInfo ) ) /* 301C only */
+ XGINew_SetRegOR( pVBInfo->Part4Port , 0x0D , 0x04 ) ; /* Set Part4 0x0D D[2]=1 for dynamic sense */
+
+ if ( ( XGINew_Is301B( pVBInfo ) ) )
+ XGINew_SetRegOR( pVBInfo->Part2Port , 0x00 , 0x0C ) ; /* ????????? */
+
+ if ( XGINew_SenseHiTV( HwDeviceExtension , pVBInfo) ) /* add by kuku for Dysense HiTV //start */
+ {
+ bConnectStatus|= YPbPrSense ;
+ }
+ else
+ {
+ tempbx = XGI330_YCSenseData2 ; /* Y/C Sense Data Ptr */
+ tempcx = 0x0604 ;
+ if ( XGINew_Sense( tempbx , tempcx , pVBInfo) )
+ bConnectStatus |= SVIDEOSense ;
+
+ if ( OutputSelect & BoardTVType )
+ {
+ tempbx = XGI330_VideoSenseData2 ;
+ tempcx = 0x0804 ;
+ if ( XGINew_Sense(tempbx , tempcx, pVBInfo) )
+ bConnectStatus|= AVIDEOSense ;
+ }
+ else
+ {
+ if ( !( bConnectStatus & SVIDEOSense ) )
+ {
+ tempbx = XGI330_VideoSenseData2 ;
+ tempcx = 0x0804 ;
+ if ( XGINew_Sense( tempbx , tempcx, pVBInfo ) )
+ bConnectStatus |= AVIDEOSense ;
+ }
+ }
+ } /* end */
+ /* DySenseVBCnt */
+
+ tempbx = 0 ;
+ tempcx = 0 ;
+ XGINew_Sense(tempbx , tempcx, pVBInfo ) ;
+
+ if ( !( bConnectStatus & Monitor2Sense ) )
+ {
+ if ( XGI_SenseLCD( pHWDE , pVBInfo ) )
+ bConnectStatus |= LCDSense ;
+ }
+
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , ~( AVIDEOSense | SVIDEOSense | LCDSense | Monitor2Sense | Monitor1Sense ) , bConnectStatus ) ;
+
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x0D , pre_Part4_D ) ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x00 , pre_Part2_0 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x1E , pre_SR1E ) ;
+
+ if ( XGI_Is301C( pVBInfo ) ) /* 301C only */
+ {
+ tempax = XGINew_GetReg1( pVBInfo->Part2Port , 0x00 ) ;
+ if ( tempax & 0x20 )
+ {
+ /* Reset VBPro */
+ for( tempcx = 2 ; tempcx > 0 ; tempcx-- )
+ {
+ tempax ^= 0x20 ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x00 , tempax ) ;
+ }
+ }
+ }
+ /* End of dynamic sense VB */
+ }
+ else
+ {
+ XGI_SenseCRT1(pVBInfo) ;
+ XGI_GetSenseStatus( HwDeviceExtension, pVBInfo ) ; /* sense CRT2 */
+ bConnectStatus = XGINew_GetReg1( pVBInfo->P3d4 , 0x32 ) ;
+ }
+ temp = pushax & 0x00FF ; /* 0512 Fix Dysense hanged */
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x17 , temp ) ;
+ if ( bConnectStatus )
+ {
+ *ujConnectStatus = bConnectStatus ;
+ return( 1 ) ;
+ }
+ else
+ return( 0 ) ;
+}
+
+#endif /* WIN2000 */
+
+/* --------------------------------------------------------------------- */
+/* Function : XGISetDPMS */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+VOID XGISetDPMS( PXGI_HW_DEVICE_INFO pXGIHWDE , ULONG VESA_POWER_STATE )
+{
+ USHORT ModeNo, ModeIdIndex ;
+ UCHAR temp ;
+ VB_DEVICE_INFO VBINF;
+ PVB_DEVICE_INFO pVBInfo = &VBINF;
+ pVBInfo->BaseAddr = (ULONG)pXGIHWDE->pjIOAddress ;
+ pVBInfo->ROMAddr = pXGIHWDE->pjVirtualRomBase ;
+
+
+ pVBInfo->IF_DEF_LVDS = 0 ;
+ pVBInfo->IF_DEF_CH7005 = 0 ;
+ pVBInfo->IF_DEF_HiVision = 1 ;
+ pVBInfo->IF_DEF_LCDA = 1 ;
+ pVBInfo->IF_DEF_CH7017 = 0 ;
+ pVBInfo->IF_DEF_YPbPr = 1 ;
+ pVBInfo->IF_DEF_CRT2Monitor = 0 ;
+ pVBInfo->IF_DEF_VideoCapture = 0 ;
+ pVBInfo->IF_DEF_ScaleLCD = 0 ;
+ pVBInfo->IF_DEF_OEMUtil = 0 ;
+ pVBInfo->IF_DEF_PWD = 0 ;
+
+ InitTo330Pointer( pXGIHWDE->jChipType, pVBInfo ) ;
+ ReadVBIOSTablData( pXGIHWDE->jChipType , pVBInfo) ;
+
+ pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+ pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+ pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+ pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+ pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+ pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+ pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+ pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+ pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+ pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+ pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+ pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+ pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+ pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+ pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+ pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+ pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+
+ if ( pXGIHWDE->jChipType == XG27 )
+ {
+ if ( ( XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) & 0xE0 ) == 0xC0 )
+ {
+ if ( XGINew_GetReg1( pVBInfo->P3d4 , 0x30 ) & 0x20 )
+ {
+ pVBInfo->IF_DEF_LVDS = 1 ;
+ }
+ }
+ }
+
+ if ( pVBInfo->IF_DEF_CH7007 == 0 )
+ {
+ XGINew_SetModeScratch ( pXGIHWDE , pVBInfo ) ;
+ }
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x05 , 0x86 ) ; /* 1.Openkey */
+ XGI_UnLockCRT2( pXGIHWDE , pVBInfo) ;
+ ModeNo = XGINew_GetReg1( pVBInfo->P3d4 , 0x34 ) ;
+ XGI_SearchModeID( ModeNo , &ModeIdIndex, pVBInfo ) ;
+ XGI_GetVGAType( pXGIHWDE , pVBInfo ) ;
+
+ if ( ( pXGIHWDE->ujVBChipID == VB_CHIP_301 ) || ( pXGIHWDE->ujVBChipID == VB_CHIP_302 ) || ( pVBInfo->IF_DEF_CH7007 == 1 ))
+ {
+ XGI_GetVBType( pVBInfo ) ;
+ XGI_GetVBInfo( ModeNo , ModeIdIndex , pXGIHWDE, pVBInfo ) ;
+ XGI_GetTVInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+ XGI_GetLCDInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+ }
+
+ if ( VESA_POWER_STATE == 0x00000400 )
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x31 , ( UCHAR )( XGINew_GetReg1( pVBInfo->Part4Port , 0x31 ) & 0xFE ) ) ;
+ else
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x31 , ( UCHAR )( XGINew_GetReg1( pVBInfo->Part4Port , 0x31 ) | 0x01 ) ) ;
+
+ temp = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x1f ) ;
+ temp &= 0x3f ;
+ switch ( VESA_POWER_STATE )
+ {
+ case 0x00000000: /* on */
+ if ( ( pXGIHWDE->ujVBChipID == VB_CHIP_301 ) || ( pXGIHWDE->ujVBChipID == VB_CHIP_302 ) )
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x1f , ( UCHAR )( temp | 0x00 ) ) ;
+ XGI_EnableBridge( pXGIHWDE, pVBInfo ) ;
+ }
+ else
+ {
+ if ( pXGIHWDE->jChipType == XG21 )
+ {
+ if ( pVBInfo->IF_DEF_LVDS == 1 )
+ {
+ XGI_XG21BLSignalVDD( 0x01 , 0x01, pVBInfo ) ; /* LVDS VDD on */
+ XGI_XG21SetPanelDelay( 2,pVBInfo ) ;
+ }
+ }
+ if ( pXGIHWDE->jChipType == XG27 )
+ {
+ if ( pVBInfo->IF_DEF_LVDS == 1 )
+ {
+ XGI_XG27BLSignalVDD( 0x01 , 0x01, pVBInfo ) ; /* LVDS VDD on */
+ XGI_XG21SetPanelDelay( 2,pVBInfo ) ;
+ }
+ }
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x1F , ~0xC0 , 0x00 ) ;
+ XGINew_SetRegAND( pVBInfo->P3c4 , 0x01 , ~0x20 ) ; /* CRT on */
+
+ if ( pXGIHWDE->jChipType == XG21 )
+ {
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+ if ( temp & 0xE0 )
+ {
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x09 , ~0x80 , 0x80 ) ; /* DVO ON */
+ XGI_SetXG21FPBits( pVBInfo );
+ XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x20 ) ; /* Enable write GPIOF */
+ /*XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x48 , ~0x20 , 0x20 ) ;*/ /* LCD Display ON */
+ }
+ XGI_XG21BLSignalVDD( 0x20 , 0x20, pVBInfo ) ; /* LVDS signal on */
+ XGI_DisplayOn( pXGIHWDE, pVBInfo );
+ }
+ if ( pXGIHWDE->jChipType == XG27 )
+ {
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+ if ( temp & 0xE0 )
+ {
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x09 , ~0x80 , 0x80 ) ; /* DVO ON */
+ XGI_SetXG27FPBits( pVBInfo );
+ XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x20 ) ; /* Enable write GPIOF */
+ /*XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x48 , ~0x20 , 0x20 ) ;*/ /* LCD Display ON */
+ }
+ XGI_XG27BLSignalVDD( 0x20 , 0x20, pVBInfo ) ; /* LVDS signal on */
+ XGI_DisplayOn( pXGIHWDE, pVBInfo );
+ }
+ }
+ break ;
+ case 0x00000100: /* standby */
+ if ( pXGIHWDE->jChipType >= XG21 )
+ {
+ XGI_DisplayOff( pXGIHWDE, pVBInfo );
+ }
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x1f , ( UCHAR )( temp | 0x40 ) ) ;
+ break ;
+ case 0x00000200: /* suspend */
+ if ( pXGIHWDE->jChipType == XG21 )
+ {
+ XGI_DisplayOff( pXGIHWDE, pVBInfo );
+ XGI_XG21BLSignalVDD( 0x20 , 0x00, pVBInfo ) ; /* LVDS signal off */
+ }
+ if ( pXGIHWDE->jChipType == XG27 )
+ {
+ XGI_DisplayOff( pXGIHWDE, pVBInfo );
+ XGI_XG27BLSignalVDD( 0x20 , 0x00, pVBInfo ) ; /* LVDS signal off */
+ }
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x1f , ( UCHAR )( temp | 0x80 ) ) ;
+ break ;
+ case 0x00000400: /* off */
+ if ( (pXGIHWDE->ujVBChipID == VB_CHIP_301 ) || ( pXGIHWDE->ujVBChipID == VB_CHIP_302 ) )
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x1f , ( UCHAR )( temp | 0xc0 ) ) ;
+ XGI_DisableBridge( pXGIHWDE, pVBInfo ) ;
+ }
+ else
+ {
+ if ( pXGIHWDE->jChipType == XG21 )
+ {
+ XGI_DisplayOff( pXGIHWDE, pVBInfo );
+
+ XGI_XG21BLSignalVDD( 0x20 , 0x00, pVBInfo ) ; /* LVDS signal off */
+
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+ if ( temp & 0xE0 )
+ {
+ XGINew_SetRegAND( pVBInfo->P3c4 , 0x09 , ~0x80 ) ; /* DVO Off */
+ XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x20 ) ; /* Enable write GPIOF */
+ /*XGINew_SetRegAND( pVBInfo->P3d4 , 0x48 , ~0x20 ) ;*/ /* LCD Display OFF */
+ }
+ }
+ if ( pXGIHWDE->jChipType == XG27 )
+ {
+ XGI_DisplayOff( pXGIHWDE, pVBInfo );
+
+ XGI_XG27BLSignalVDD( 0x20 , 0x00, pVBInfo ) ; /* LVDS signal off */
+
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+ if ( temp & 0xE0 )
+ {
+ XGINew_SetRegAND( pVBInfo->P3c4 , 0x09 , ~0x80 ) ; /* DVO Off */
+ }
+ }
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x1F , ~0xC0 , 0xC0 ) ;
+ XGINew_SetRegOR( pVBInfo->P3c4 , 0x01 , 0x20 ) ; /* CRT Off */
+
+ if ( ( pXGIHWDE->jChipType == XG21 ) && ( pVBInfo->IF_DEF_LVDS == 1 ) )
+ {
+ XGI_XG21SetPanelDelay( 4,pVBInfo ) ;
+ XGI_XG21BLSignalVDD( 0x01 , 0x00, pVBInfo ) ; /* LVDS VDD off */
+ XGI_XG21SetPanelDelay( 5,pVBInfo ) ;
+ }
+ if ( ( pXGIHWDE->jChipType == XG27 ) && ( pVBInfo->IF_DEF_LVDS == 1 ) )
+ {
+ XGI_XG21SetPanelDelay( 4,pVBInfo ) ;
+ XGI_XG27BLSignalVDD( 0x01 , 0x00, pVBInfo ) ; /* LVDS VDD off */
+ XGI_XG21SetPanelDelay( 5,pVBInfo ) ;
+ }
+ }
+ break ;
+
+ default:
+ break ;
+ }
+ XGI_LockCRT2( pXGIHWDE , pVBInfo ) ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetSenseStatus */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetSenseStatus( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT tempax = 0 , tempbx , tempcx , temp ,
+ P2reg0 = 0 , SenseModeNo = 0 , OutputSelect = *pVBInfo->pOutputSelect ,
+ ModeIdIndex , i ;
+ pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+
+ if ( pVBInfo->IF_DEF_LVDS == 1 )
+ {
+ tempax = XGINew_GetReg1( pVBInfo->P3c4 , 0x1A ) ; /* ynlai 02/27/2002 */
+ tempbx = XGINew_GetReg1( pVBInfo->P3c4 , 0x1B ) ;
+ tempax = ( ( tempax & 0xFE ) >> 1 ) | ( tempbx << 8 ) ;
+ if ( tempax == 0x00 )
+ { /* Get Panel id from DDC */
+ temp = XGINew_GetLCDDDCInfo( HwDeviceExtension, pVBInfo ) ;
+ if ( temp == 1 )
+ { /* LCD connect */
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x39 , 0xFF , 0x01 ) ; /* set CR39 bit0="1" */
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x37 , 0xEF , 0x00 ) ; /* clean CR37 bit4="0" */
+ temp = LCDSense ;
+ }
+ else
+ { /* LCD don't connect */
+ temp = 0 ;
+ }
+ }
+ else
+ {
+ XGINew_GetPanelID(pVBInfo) ;
+ temp = LCDSense ;
+ }
+
+ tempbx = ~( LCDSense | AVIDEOSense | SVIDEOSense ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , tempbx , temp ) ;
+ }
+ else
+ { /* for 301 */
+ if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+ { /* for HiVision */
+ tempax = XGINew_GetReg1( pVBInfo->P3c4 , 0x38 ) ;
+ temp = tempax & 0x01 ;
+ tempax = XGINew_GetReg1( pVBInfo->P3c4 , 0x3A ) ;
+ temp = temp | ( tempax & 0x02 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , 0xA0 , temp ) ;
+ }
+ else
+ {
+ if ( XGI_BridgeIsOn( pVBInfo ) )
+ {
+ P2reg0 = XGINew_GetReg1( pVBInfo->Part2Port , 0x00 ) ;
+ if ( !XGINew_BridgeIsEnable( HwDeviceExtension, pVBInfo ) )
+ {
+ SenseModeNo = 0x2e ;
+ /* XGINew_SetReg1( pVBInfo->P3d4 , 0x30 , 0x41 ) ; */
+ /* XGISetModeNew( HwDeviceExtension , 0x2e ) ; // ynlai InitMode */
+
+ temp = XGI_SearchModeID( SenseModeNo , &ModeIdIndex, pVBInfo ) ;
+ XGI_GetVGAType( HwDeviceExtension , pVBInfo) ;
+ XGI_GetVBType( pVBInfo ) ;
+ pVBInfo->SetFlag = 0x00 ;
+ pVBInfo->ModeType = ModeVGA ;
+ pVBInfo->VBInfo = SetCRT2ToRAMDAC | LoadDACFlag | SetInSlaveMode ;
+ XGI_GetLCDInfo( 0x2e , ModeIdIndex, pVBInfo ) ;
+ XGI_GetTVInfo( 0x2e , ModeIdIndex, pVBInfo ) ;
+ XGI_EnableBridge( HwDeviceExtension, pVBInfo ) ;
+ XGI_SetCRT2Group301( SenseModeNo , HwDeviceExtension, pVBInfo ) ;
+ XGI_SetCRT2ModeRegs( 0x2e , HwDeviceExtension, pVBInfo ) ;
+ /* XGI_DisableBridge( HwDeviceExtension, pVBInfo ) ; */
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x01 , 0xDF , 0x20 ) ; /* Display Off 0212 */
+ for( i = 0 ; i < 20 ; i++ )
+ {
+ XGI_LongWait(pVBInfo) ;
+ }
+ }
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x00 , 0x1c ) ;
+ tempax = 0 ;
+ tempbx = *pVBInfo->pRGBSenseData ;
+
+ if ( !( XGINew_Is301B( pVBInfo ) ) )
+ {
+ tempbx = *pVBInfo->pRGBSenseData2 ;
+ }
+
+ tempcx = 0x0E08 ;
+ if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+ {
+ if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+ {
+ tempax |= Monitor2Sense ;
+ }
+ }
+
+ if ( pVBInfo->VBType & VB_XGI301C)
+ {
+ XGINew_SetRegOR( pVBInfo->Part4Port , 0x0d , 0x04 ) ;
+ }
+
+ if ( XGINew_SenseHiTV( HwDeviceExtension , pVBInfo) ) /* add by kuku for Multi-adapter sense HiTV */
+ {
+ tempax |= HiTVSense ;
+ if ( ( pVBInfo->VBType & VB_XGI301C ) )
+ {
+ tempax ^= ( HiTVSense | YPbPrSense ) ;
+ }
+ }
+
+ if ( !( tempax & ( HiTVSense | YPbPrSense ) ) ) /* start */
+ {
+
+ tempbx = *pVBInfo->pYCSenseData ;
+
+ if ( !( XGINew_Is301B( pVBInfo ) ) )
+ {
+ tempbx=*pVBInfo->pYCSenseData2;
+ }
+
+ tempcx = 0x0604 ;
+ if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+ {
+ if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+ {
+ tempax |= SVIDEOSense ;
+ }
+ }
+
+ if ( OutputSelect & BoardTVType )
+ {
+ tempbx = *pVBInfo->pVideoSenseData ;
+
+ if ( !( XGINew_Is301B( pVBInfo ) ) )
+ {
+ tempbx = *pVBInfo->pVideoSenseData2 ;
+ }
+
+ tempcx = 0x0804 ;
+ if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+ {
+ if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+ {
+ tempax |= AVIDEOSense ;
+ }
+ }
+ }
+ else
+ {
+ if ( !( tempax & SVIDEOSense ) )
+ {
+ tempbx = *pVBInfo->pVideoSenseData ;
+
+ if ( !( XGINew_Is301B( pVBInfo ) ) )
+ {
+ tempbx=*pVBInfo->pVideoSenseData2;
+ }
+
+ tempcx = 0x0804 ;
+ if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+ {
+ if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+ {
+ tempax |= AVIDEOSense ;
+ }
+ }
+ }
+ }
+ }
+ } /* end */
+ if ( !( tempax & Monitor2Sense ) )
+ {
+ if ( XGINew_SenseLCD( HwDeviceExtension, pVBInfo ) )
+ {
+ tempax |= LCDSense ;
+ }
+ }
+ tempbx = 0 ;
+ tempcx = 0 ;
+ XGINew_Sense(tempbx , tempcx, pVBInfo ) ;
+
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , ~0xDF , tempax ) ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x00 , P2reg0 ) ;
+
+ if ( !( P2reg0 & 0x20 ) )
+ {
+ pVBInfo->VBInfo = DisableCRT2Display ;
+ /* XGI_SetCRT2Group301( SenseModeNo , HwDeviceExtension, pVBInfo ) ; */
+ }
+ }
+ }
+ XGI_DisableBridge( HwDeviceExtension, pVBInfo ) ; /* shampoo 0226 */
+
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SenseLCD */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGINew_SenseLCD( PXGI_HW_DEVICE_INFO HwDeviceExtension ,PVB_DEVICE_INFO pVBInfo)
+{
+ /* USHORT SoftSetting ; */
+ USHORT temp ;
+
+ if ( ( HwDeviceExtension->jChipType >= XG20 ) || ( HwDeviceExtension->jChipType >= XG40 ) )
+ temp = 0 ;
+ else
+ temp=XGINew_GetPanelID(pVBInfo) ;
+
+ if( !temp )
+ temp = XGINew_GetLCDDDCInfo( HwDeviceExtension, pVBInfo ) ;
+
+ return( temp ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_GetLCDDDCInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGINew_GetLCDDDCInfo( PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT temp ;
+
+ /* add lcd sense */
+ if ( HwDeviceExtension->ulCRT2LCDType == LCD_UNKNOWN )
+ {
+ return( 0 ) ;
+ }
+ else
+ {
+ temp = ( USHORT )HwDeviceExtension->ulCRT2LCDType ;
+ switch( HwDeviceExtension->ulCRT2LCDType )
+ {
+ case LCD_INVALID:
+ case LCD_800x600:
+ case LCD_1024x768:
+ case LCD_1280x1024:
+ break ;
+
+ case LCD_640x480:
+ case LCD_1024x600:
+ case LCD_1152x864:
+ case LCD_1280x960:
+ case LCD_1152x768:
+ temp = 0 ;
+ break ;
+
+ case LCD_1400x1050:
+ case LCD_1280x768:
+ case LCD_1600x1200:
+ break ;
+
+ case LCD_1920x1440:
+ case LCD_2048x1536:
+ temp = 0 ;
+ break ;
+
+ default:
+ break ;
+ }
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x36 , 0xF0 , temp ) ;
+ return( 1 ) ;
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGINew_GetPanelID(PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT PanelTypeTable[ 16 ] = { SyncNN | PanelRGB18Bit | Panel800x600 | _PanelType00 ,
+ SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType01 ,
+ SyncNN | PanelRGB18Bit | Panel800x600 | _PanelType02 ,
+ SyncNN | PanelRGB18Bit | Panel640x480 | _PanelType03 ,
+ SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType04 ,
+ SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType05 ,
+ SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType06 ,
+ SyncNN | PanelRGB24Bit | Panel1024x768 | _PanelType07 ,
+ SyncNN | PanelRGB18Bit | Panel800x600 | _PanelType08 ,
+ SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType09 ,
+ SyncNN | PanelRGB18Bit | Panel800x600 | _PanelType0A ,
+ SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType0B ,
+ SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType0C ,
+ SyncNN | PanelRGB24Bit | Panel1024x768 | _PanelType0D ,
+ SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType0E ,
+ SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType0F } ;
+ USHORT tempax , tempbx , temp ;
+ /* USHORT return_flag ; */
+
+ tempax = XGINew_GetReg1( pVBInfo->P3c4 , 0x1A ) ;
+ tempbx = tempax & 0x1E ;
+
+ if ( tempax == 0 )
+ return( 0 ) ;
+ else
+ {
+/*
+ if ( !( tempax & 0x10 ) )
+ {
+ if ( pVBInfo->IF_DEF_LVDS == 1 )
+ {
+ tempbx = 0 ;
+ temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x38 ) ;
+ if ( temp & 0x40 )
+ tempbx |= 0x08 ;
+ if ( temp & 0x20 )
+ tempbx |= 0x02 ;
+ if ( temp & 0x01 )
+ tempbx |= 0x01 ;
+
+ temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x39 ) ;
+ if ( temp & 0x80 )
+ tempbx |= 0x04 ;
+ }
+ else
+ {
+ return( 0 ) ;
+ }
+ }
+*/
+
+ tempbx = tempbx >> 1 ;
+ temp = tempbx & 0x00F ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x36 , temp ) ;
+ tempbx-- ;
+ tempbx = PanelTypeTable[ tempbx ] ;
+
+ temp = ( tempbx & 0xFF00 ) >> 8 ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x37 , ~( LCDSyncBit | LCDRGB18Bit ) , temp ) ;
+ return( 1 ) ;
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_BridgeIsEnable */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGINew_BridgeIsEnable( PXGI_HW_DEVICE_INFO HwDeviceExtension ,PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT flag ;
+
+ if ( XGI_BridgeIsOn( pVBInfo ) == 0 )
+ {
+ flag = XGINew_GetReg1( pVBInfo->Part1Port , 0x0 ) ;
+
+ if ( flag & 0x050 )
+ {
+ return( 1 ) ;
+ }
+ else
+ {
+ return( 0 ) ;
+ }
+
+ }
+ return( 0 ) ;
+}
+
+/* ------------------------------------------------------ */
+/* Function : XGINew_SenseHiTV */
+/* Input : */
+/* Output : */
+/* Description : */
+/* ------------------------------------------------------ */
+BOOLEAN XGINew_SenseHiTV( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT tempbx , tempcx , temp , i , tempch;
+
+ tempbx = *pVBInfo->pYCSenseData2 ;
+
+ tempcx = 0x0604 ;
+
+ temp = tempbx & 0xFF ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x11 , temp ) ;
+ temp = ( tempbx & 0xFF00 ) >> 8 ;
+ temp |= ( tempcx & 0x00FF ) ;
+ XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x10 , ~0x1F , temp ) ;
+
+ for( i = 0 ; i < 10 ; i++ )
+ XGI_LongWait(pVBInfo) ;
+
+ tempch = ( tempcx & 0xFF00 ) >> 8;
+ temp = XGINew_GetReg1( pVBInfo->Part4Port , 0x03 ) ;
+ temp = temp ^ ( 0x0E ) ;
+ temp &= tempch ;
+
+ if ( temp != tempch )
+ return( 0 ) ;
+
+ tempbx = *pVBInfo->pVideoSenseData2 ;
+
+ tempcx = 0x0804 ;
+ temp = tempbx & 0xFF ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x11 , temp ) ;
+ temp = ( tempbx & 0xFF00 ) >> 8 ;
+ temp |= ( tempcx & 0x00FF ) ;
+ XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x10 , ~0x1F , temp ) ;
+
+ for( i = 0 ; i < 10 ; i++ )
+ XGI_LongWait(pVBInfo) ;
+
+ tempch = ( tempcx & 0xFF00 ) >> 8;
+ temp = XGINew_GetReg1( pVBInfo->Part4Port , 0x03 ) ;
+ temp = temp ^ ( 0x0E ) ;
+ temp &= tempch ;
+
+ if ( temp != tempch )
+ return( 0 ) ;
+ else
+ {
+ tempbx = 0x3FF ;
+ tempcx = 0x0804 ;
+ temp = tempbx & 0xFF ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x11 , temp ) ;
+ temp = ( tempbx & 0xFF00 ) >> 8 ;
+ temp |= ( tempcx & 0x00FF ) ;
+ XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x10 , ~0x1F , temp ) ;
+
+ for( i = 0 ; i < 10 ; i++ )
+ XGI_LongWait(pVBInfo) ;
+
+ tempch = ( tempcx & 0xFF00 ) >> 8;
+ temp = XGINew_GetReg1( pVBInfo->Part4Port , 0x03 ) ;
+ temp = temp ^ ( 0x0E ) ;
+ temp &= tempch ;
+
+ if ( temp != tempch )
+ return( 1 ) ;
+ else
+ return( 0 ) ;
+ }
+}
+
+
+
+/*
+;-----------------------------------------------------------------------------
+; Description: Get Panel support
+; O/P :
+; BL: Panel ID=81h for no scaler LVDS
+; BH: Panel enhanced Mode Count
+; CX: Panel H. resolution
+; DX: PAnel V. resolution
+;-----------------------------------------------------------------------------
+*/
+void XGI_XG21Fun14Sub70( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
+{
+
+ USHORT ModeIdIndex;
+ USHORT ModeNo;
+
+ USHORT EModeCount;
+ USHORT lvdstableindex;
+
+ lvdstableindex = XGI_GetLVDSOEMTableIndex( pVBInfo );
+ pBiosArguments->h.bl = 0x81;
+ pBiosArguments->x.cx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE;
+ pBiosArguments->x.dx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE;
+ EModeCount = 0;
+
+ pBiosArguments->x.ax = 0x0014;
+ for( ModeIdIndex = 0 ; ; ModeIdIndex ++ )
+ {
+ ModeNo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeID;
+ if ( pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeID == 0xFF )
+ {
+ pBiosArguments->h.bh = (UCHAR) EModeCount;
+ return;
+ }
+ if ( !XGI_XG21CheckLVDSMode( ModeNo , ModeIdIndex, pVBInfo) )
+ {
+ continue;
+ }
+ EModeCount++ ;
+ }
+}
+/*(
+;-----------------------------------------------------------------------------
+;
+; Description: Get Panel mode ID for enhanced mode
+; I/P : BH: EModeIndex ( which < Panel enhanced Mode Count )
+; O/P :
+; BL: Mode ID
+; CX: H. resolution of the assigned by the index
+; DX: V. resolution of the assigned by the index
+;
+;-----------------------------------------------------------------------------
+*/
+void XGI_XG21Fun14Sub71( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
+{
+
+ USHORT EModeCount;
+ USHORT ModeIdIndex,resindex;
+ USHORT ModeNo;
+ USHORT EModeIndex = pBiosArguments->h.bh;
+
+ EModeCount = 0;
+ for( ModeIdIndex = 0 ; ; ModeIdIndex ++ )
+ {
+ ModeNo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeID;
+ if ( pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeID == 0xFF )
+ {
+ pBiosArguments->x.ax = 0x0114;
+ return;
+ }
+ if ( !XGI_XG21CheckLVDSMode( ModeNo , ModeIdIndex, pVBInfo) )
+ {
+ continue;
+ }
+ if (EModeCount == EModeIndex)
+ {
+ resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+ pBiosArguments->h.bl = (UCHAR) ModeNo;
+ pBiosArguments->x.cx = pVBInfo->ModeResInfo[ resindex ].HTotal ; /* xres->ax */
+ pBiosArguments->x.dx = pVBInfo->ModeResInfo[ resindex ].VTotal ; /* yres->bx */
+ pBiosArguments->x.ax = 0x0014;
+ }
+ EModeCount++ ;
+
+ }
+
+}
+/*
+;-----------------------------------------------------------------------------
+;
+; Description: Validate Panel modes ID support
+; I/P :
+; BL: ModeID
+; O/P :
+; CX: H. resolution of the assigned by the index
+; DX: V. resolution of the assigned by the index
+;
+;-----------------------------------------------------------------------------
+*/
+void XGI_XG21Fun14Sub72( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
+{
+ USHORT ModeIdIndex,resindex;
+ USHORT ModeNo;
+
+
+ ModeNo = pBiosArguments->h.bl ;
+ XGI_SearchModeID( ModeNo, &ModeIdIndex, pVBInfo);
+ if ( !XGI_XG21CheckLVDSMode( ModeNo , ModeIdIndex, pVBInfo) )
+ {
+ pBiosArguments->x.cx = 0;
+ pBiosArguments->x.dx = 0;
+ pBiosArguments->x.ax = 0x0114;
+ return;
+ }
+ resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+ if ( ModeNo <= 0x13 )
+ {
+ pBiosArguments->x.cx = pVBInfo->StResInfo[ resindex ].HTotal ;
+ pBiosArguments->x.dx = pVBInfo->StResInfo[ resindex ].VTotal ;
+ }
+ else
+ {
+ pBiosArguments->x.cx = pVBInfo->ModeResInfo[ resindex ].HTotal ; /* xres->ax */
+ pBiosArguments->x.dx = pVBInfo->ModeResInfo[ resindex ].VTotal ; /* yres->bx */
+ }
+
+ pBiosArguments->x.ax = 0x0014;
+
+}
+
+/*
+;-----------------------------------------------------------------------------
+; Description: Get Customized Panel misc. information support
+; I/P : Select
+; to get panel horizontal timing
+; to get panel vertical timing
+; to get channel clock parameter
+; to get panel misc information
+;
+; O/P :
+; BL: for input Select = 0 ;
+; BX: *Value1 = Horizontal total
+; CX: *Value2 = Horizontal front porch
+; DX: *Value2 = Horizontal sync width
+; BL: for input Select = 1 ;
+; BX: *Value1 = Vertical total
+; CX: *Value2 = Vertical front porch
+; DX: *Value2 = Vertical sync width
+; BL: for input Select = 2 ;
+; BX: Value1 = The first CLK parameter
+; CX: Value2 = The second CLK parameter
+; BL: for input Select = 4 ;
+; BX[15]: *Value1 D[15] VESA V. Polarity
+; BX[14]: *Value1 D[14] VESA H. Polarity
+; BX[7]: *Value1 D[7] Panel V. Polarity
+; BX[6]: *Value1 D[6] Panel H. Polarity
+;-----------------------------------------------------------------------------
+*/
+void XGI_XG21Fun14Sub73( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
+{
+ UCHAR Select;
+
+ USHORT lvdstableindex;
+
+ lvdstableindex = XGI_GetLVDSOEMTableIndex( pVBInfo );
+ Select = pBiosArguments->h.bl;
+
+ switch (Select)
+ {
+ case 0:
+ pBiosArguments->x.bx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHT;
+ pBiosArguments->x.cx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHFP;
+ pBiosArguments->x.dx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHSYNC;
+ break;
+ case 1:
+ pBiosArguments->x.bx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVT;
+ pBiosArguments->x.cx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVFP;
+ pBiosArguments->x.dx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVSYNC;
+ break;
+ case 2:
+ pBiosArguments->x.bx = pVBInfo->XG21_LVDSCapList[lvdstableindex].VCLKData1;
+ pBiosArguments->x.cx = pVBInfo->XG21_LVDSCapList[lvdstableindex].VCLKData2;
+ break;
+ case 4:
+ pBiosArguments->x.bx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability;
+ break;
+ }
+
+ pBiosArguments->x.ax = 0x0014;
+}
+
+
+void XGI_XG21Fun14( PXGI_HW_DEVICE_INFO pXGIHWDE, PX86_REGS pBiosArguments)
+{
+ VB_DEVICE_INFO VBINF;
+ PVB_DEVICE_INFO pVBInfo = &VBINF;
+
+ pVBInfo->IF_DEF_LVDS = 0 ;
+ pVBInfo->IF_DEF_CH7005 = 0 ;
+ pVBInfo->IF_DEF_HiVision = 1 ;
+ pVBInfo->IF_DEF_LCDA = 1 ;
+ pVBInfo->IF_DEF_CH7017 = 0 ;
+ pVBInfo->IF_DEF_YPbPr = 1 ;
+ pVBInfo->IF_DEF_CRT2Monitor = 0 ;
+ pVBInfo->IF_DEF_VideoCapture = 0 ;
+ pVBInfo->IF_DEF_ScaleLCD = 0 ;
+ pVBInfo->IF_DEF_OEMUtil = 0 ;
+ pVBInfo->IF_DEF_PWD = 0 ;
+
+ InitTo330Pointer( pXGIHWDE->jChipType, pVBInfo ) ;
+ ReadVBIOSTablData( pXGIHWDE->jChipType , pVBInfo) ;
+
+ pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+ pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+ pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+ pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+ pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+ pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+ pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+ pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+ pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+ pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+ pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+ pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+ pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+ pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+ pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+ pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+ pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+
+ switch(pBiosArguments->x.ax)
+ {
+ case 0x1470:
+ XGI_XG21Fun14Sub70( pVBInfo , pBiosArguments ) ;
+ break;
+ case 0x1471:
+ XGI_XG21Fun14Sub71( pVBInfo , pBiosArguments ) ;
+ break;
+ case 0x1472:
+ XGI_XG21Fun14Sub72( pVBInfo , pBiosArguments ) ;
+ break;
+ case 0x1473:
+ XGI_XG21Fun14Sub73( pVBInfo , pBiosArguments ) ;
+ break;
+ }
+}
diff --git a/drivers/staging/xgifb/vb_ext.h b/drivers/staging/xgifb/vb_ext.h
new file mode 100644
index 0000000..9a72f5e
--- /dev/null
+++ b/drivers/staging/xgifb/vb_ext.h
@@ -0,0 +1,32 @@
+#ifndef _VBEXT_
+#define _VBEXT_
+
+struct DWORDREGS {
+ ULONG Eax, Ebx, Ecx, Edx, Esi, Edi, Ebp;
+};
+
+struct WORDREGS {
+ USHORT ax, hi_ax, bx, hi_bx, cx, hi_cx, dx, hi_dx, si, hi_si, di ,hi_di, bp, hi_bp;
+};
+
+struct BYTEREGS {
+ UCHAR al, ah, hi_al, hi_ah, bl, bh, hi_bl, hi_bh, cl, ch, hi_cl, hi_ch, dl, dh, hi_dl, hi_dh;
+};
+
+typedef union _X86_REGS {
+ struct DWORDREGS e;
+ struct WORDREGS x;
+ struct BYTEREGS h;
+} X86_REGS, *PX86_REGS;
+
+extern void XGI_XG21Fun14( PXGI_HW_DEVICE_INFO pXGIHWDE, PX86_REGS pBiosArguments);
+extern void XGISetDPMS( PXGI_HW_DEVICE_INFO pXGIHWDE , ULONG VESA_POWER_STATE ) ;
+extern void XGI_GetSenseStatus( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo );
+extern void XGINew_SetModeScratch ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo ) ;
+extern void ReadVBIOSTablData( UCHAR ChipType , PVB_DEVICE_INFO pVBInfo);
+extern USHORT XGINew_SenseLCD(PXGI_HW_DEVICE_INFO,PVB_DEVICE_INFO pVBInfo);
+#ifdef WIN2000
+extern BOOLEAN XGI_DySense( PHW_DEVICE_EXTENSION pHWDE , PUCHAR ujConnectStatus );
+#endif /* WIN2000 */
+
+#endif
diff --git a/drivers/staging/xgifb/vb_init.c b/drivers/staging/xgifb/vb_init.c
new file mode 100644
index 0000000..b85ca9b
--- /dev/null
+++ b/drivers/staging/xgifb/vb_init.c
@@ -0,0 +1,3444 @@
+#include "osdef.h"
+#include "vgatypes.h"
+
+
+#ifdef LINUX_KERNEL
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/delay.h> /* udelay */
+#include "XGIfb.h"
+/*#if LINUX_VERSxION_CODE >= KERNEL_VERSION(2,5,0)
+#include <video/XGIfb.h>
+#else
+#include <linux/XGIfb.h>
+#endif */
+#endif
+
+#ifdef WIN2000
+#include <dderror.h>
+#include <devioctl.h>
+#include <miniport.h>
+#include <ntddvdeo.h>
+#include <video.h>
+#include "xgiv.h"
+#include "dd_i2c.h"
+#include "tools.h"
+#endif
+
+#include "vb_def.h"
+#include "vb_struct.h"
+#include "vb_util.h"
+#include "vb_setmode.h"
+#include "vb_init.h"
+#include "vb_ext.h"
+
+#ifdef LINUX_XF86
+#include "xf86.h"
+#include "xf86PciInfo.h"
+#include "xgi.h"
+#include "xgi_regs.h"
+#endif
+
+#ifdef LINUX_KERNEL
+#include <asm/io.h>
+#include <linux/types.h>
+#endif
+
+
+
+
+UCHAR XGINew_ChannelAB,XGINew_DataBusWidth;
+
+USHORT XGINew_DRAMType[17][5]={{0x0C,0x0A,0x02,0x40,0x39},{0x0D,0x0A,0x01,0x40,0x48},
+ {0x0C,0x09,0x02,0x20,0x35},{0x0D,0x09,0x01,0x20,0x44},
+ {0x0C,0x08,0x02,0x10,0x31},{0x0D,0x08,0x01,0x10,0x40},
+ {0x0C,0x0A,0x01,0x20,0x34},{0x0C,0x09,0x01,0x08,0x32},
+ {0x0B,0x08,0x02,0x08,0x21},{0x0C,0x08,0x01,0x08,0x30},
+ {0x0A,0x08,0x02,0x04,0x11},{0x0B,0x0A,0x01,0x10,0x28},
+ {0x09,0x08,0x02,0x02,0x01},{0x0B,0x09,0x01,0x08,0x24},
+ {0x0B,0x08,0x01,0x04,0x20},{0x0A,0x08,0x01,0x02,0x10},
+ {0x09,0x08,0x01,0x01,0x00}};
+
+USHORT XGINew_SDRDRAM_TYPE[13][5]=
+{
+{ 2,12, 9,64,0x35},
+{ 1,13, 9,64,0x44},
+{ 2,12, 8,32,0x31},
+{ 2,11, 9,32,0x25},
+{ 1,12, 9,32,0x34},
+{ 1,13, 8,32,0x40},
+{ 2,11, 8,16,0x21},
+{ 1,12, 8,16,0x30},
+{ 1,11, 9,16,0x24},
+{ 1,11, 8, 8,0x20},
+{ 2, 9, 8, 4,0x01},
+{ 1,10, 8, 4,0x10},
+{ 1, 9, 8, 2,0x00}
+};
+
+USHORT XGINew_DDRDRAM_TYPE[4][5]=
+{
+{ 2,12, 9,64,0x35},
+{ 2,12, 8,32,0x31},
+{ 2,11, 8,16,0x21},
+{ 2, 9, 8, 4,0x01}
+};
+USHORT XGINew_DDRDRAM_TYPE340[4][5]=
+{
+{ 2,13, 9,64,0x45},
+{ 2,12, 9,32,0x35},
+{ 2,12, 8,16,0x31},
+{ 2,11, 8, 8,0x21}
+};
+USHORT XGINew_DDRDRAM_TYPE20[12][5]=
+{
+{ 2,14,11,128,0x5D},
+{ 2,14,10,64,0x59},
+{ 2,13,11,64,0x4D},
+{ 2,14, 9,32,0x55},
+{ 2,13,10,32,0x49},
+{ 2,12,11,32,0x3D},
+{ 2,14, 8,16,0x51},
+{ 2,13, 9,16,0x45},
+{ 2,12,10,16,0x39},
+{ 2,13, 8, 8,0x41},
+{ 2,12, 9, 8,0x35},
+{ 2,12, 8, 4,0x31}
+};
+
+void XGINew_SetDRAMSize_340(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO);
+void XGINew_SetDRAMSize_310(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO);
+void XGINew_SetMemoryClock(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+void XGINew_SetDRAMModeRegister(PVB_DEVICE_INFO );
+void XGINew_SetDRAMModeRegister340( PXGI_HW_DEVICE_INFO HwDeviceExtension );
+void XGINew_SetDRAMDefaultRegister340(PXGI_HW_DEVICE_INFO HwDeviceExtension, ULONG, PVB_DEVICE_INFO );
+UCHAR XGINew_GetXG20DRAMType( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo);
+BOOLEAN XGIInitNew( PXGI_HW_DEVICE_INFO HwDeviceExtension) ;
+
+int XGINew_DDRSizing340( PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO );
+void XGINew_DisableRefresh( PXGI_HW_DEVICE_INFO ,PVB_DEVICE_INFO) ;
+void XGINew_CheckBusWidth_310( PVB_DEVICE_INFO) ;
+int XGINew_SDRSizing(PVB_DEVICE_INFO);
+int XGINew_DDRSizing( PVB_DEVICE_INFO );
+void XGINew_EnableRefresh( PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO);
+int XGINew_RAMType; /*int ModeIDOffset,StandTable,CRT1Table,ScreenOffset,REFIndex;*/
+ULONG UNIROM; /* UNIROM */
+BOOLEAN ChkLFB( PVB_DEVICE_INFO );
+void XGINew_Delay15us(ULONG);
+void SetPowerConsume (PXGI_HW_DEVICE_INFO HwDeviceExtension,ULONG XGI_P3d4Port);
+void ReadVBIOSTablData( UCHAR ChipType , PVB_DEVICE_INFO pVBInfo);
+void XGINew_DDR1x_MRS_XG20( ULONG P3c4 , PVB_DEVICE_INFO pVBInfo);
+void XGINew_SetDRAMModeRegister_XG20( PXGI_HW_DEVICE_INFO HwDeviceExtension );
+void XGINew_SetDRAMModeRegister_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension );
+void XGINew_ChkSenseStatus ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo ) ;
+void XGINew_SetModeScratch ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo ) ;
+void XGINew_GetXG21Sense(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo) ;
+UCHAR GetXG21FPBits(PVB_DEVICE_INFO pVBInfo);
+void XGINew_GetXG27Sense(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo) ;
+UCHAR GetXG27FPBits(PVB_DEVICE_INFO pVBInfo);
+
+#ifdef WIN2000
+/* [Billy] 2007/05/20 For CH7007 */
+extern UCHAR CH7007TVReg_UNTSC[][8],CH7007TVReg_ONTSC[][8],CH7007TVReg_UPAL[][8],CH7007TVReg_OPAL[][8];
+extern UCHAR XGI7007_CHTVVCLKUNTSC[],XGI7007_CHTVVCLKONTSC[],XGI7007_CHTVVCLKUPAL[],XGI7007_CHTVVCLKOPAL[];
+#endif
+
+#ifdef LINUX_KERNEL
+void DelayUS(ULONG MicroSeconds)
+{
+ udelay(MicroSeconds);
+}
+#endif
+
+/* --------------------------------------------------------------------- */
+/* Function : XGIInitNew */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGIInitNew( PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+
+ VB_DEVICE_INFO VBINF;
+ PVB_DEVICE_INFO pVBInfo = &VBINF;
+ UCHAR i , temp = 0 , temp1 ;
+ // VBIOSVersion[ 5 ] ;
+ PUCHAR volatile pVideoMemory;
+
+ /* ULONG j, k ; */
+
+ PXGI_DSReg pSR ;
+
+ ULONG Temp ;
+
+ pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+
+ pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+
+ pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+
+ pVideoMemory = ( PUCHAR )pVBInfo->ROMAddr;
+
+
+// Newdebugcode( 0x99 ) ;
+
+
+ /* if ( pVBInfo->ROMAddr == 0 ) */
+ /* return( FALSE ) ; */
+
+ if ( pVBInfo->FBAddr == 0 )
+{
+ printk("\n pVBInfo->FBAddr == 0 ");
+ return( FALSE ) ;
+}
+printk("1");
+ if ( pVBInfo->BaseAddr == 0 )
+{
+ printk("\npVBInfo->BaseAddr == 0 ");
+ return( FALSE ) ;
+}
+printk("2");
+
+ XGINew_SetReg3( ( pVBInfo->BaseAddr + 0x12 ) , 0x67 ) ; /* 3c2 <- 67 ,ynlai */
+
+ pVBInfo->ISXPDOS = 0 ;
+printk("3");
+
+if ( !HwDeviceExtension->bIntegratedMMEnabled )
+{
+ return( FALSE ) ; /* alan */
+}
+printk("4");
+
+// XGI_MemoryCopy( VBIOSVersion , HwDeviceExtension->szVBIOSVer , 4 ) ;
+
+ // VBIOSVersion[ 4 ] = 0x0 ;
+
+ /* 09/07/99 modify by domao */
+
+ pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+ pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+ pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+ pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+ pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+ pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+ pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+ pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+ pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+ pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+ pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+ pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+ pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+ pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+ pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+ pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+ pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+printk("5");
+
+ if ( HwDeviceExtension->jChipType < XG20 ) /* kuku 2004/06/25 */
+ XGI_GetVBType( pVBInfo ) ; /* Run XGI_GetVBType before InitTo330Pointer */
+
+ InitTo330Pointer( HwDeviceExtension->jChipType, pVBInfo ) ;
+
+ /* ReadVBIOSData */
+ ReadVBIOSTablData( HwDeviceExtension->jChipType , pVBInfo) ;
+
+ /* 1.Openkey */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x05 , 0x86 ) ;
+printk("6");
+
+ /* GetXG21Sense (GPIO) */
+ if ( HwDeviceExtension->jChipType == XG21 )
+ {
+ XGINew_GetXG21Sense(HwDeviceExtension, pVBInfo) ;
+ }
+ if ( HwDeviceExtension->jChipType == XG27 )
+ {
+ XGINew_GetXG27Sense(HwDeviceExtension, pVBInfo) ;
+ }
+printk("7");
+
+ /* 2.Reset Extended register */
+
+ for( i = 0x06 ; i < 0x20 ; i++ )
+ XGINew_SetReg1( pVBInfo->P3c4 , i , 0 ) ;
+
+ for( i = 0x21 ; i <= 0x27 ; i++ )
+ XGINew_SetReg1( pVBInfo->P3c4 , i , 0 ) ;
+
+ /* for( i = 0x06 ; i <= 0x27 ; i++ ) */
+ /* XGINew_SetReg1( pVBInfo->P3c4 , i , 0 ) ; */
+
+printk("8");
+
+ if(( HwDeviceExtension->jChipType >= XG20 ) || ( HwDeviceExtension->jChipType >= XG40))
+ {
+ for( i = 0x31 ; i <= 0x3B ; i++ )
+ XGINew_SetReg1( pVBInfo->P3c4 , i , 0 ) ;
+ }
+ else
+ {
+ for( i = 0x31 ; i <= 0x3D ; i++ )
+ XGINew_SetReg1( pVBInfo->P3c4 , i , 0 ) ;
+ }
+printk("9");
+
+ if ( HwDeviceExtension->jChipType == XG42 ) /* [Hsuan] 2004/08/20 Auto over driver for XG42 */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x3B , 0xC0 ) ;
+
+ /* for( i = 0x30 ; i <= 0x3F ; i++ ) */
+ /* XGINew_SetReg1( pVBInfo->P3d4 , i , 0 ) ; */
+
+ for( i = 0x79 ; i <= 0x7C ; i++ )
+ XGINew_SetReg1( pVBInfo->P3d4 , i , 0 ) ; /* shampoo 0208 */
+
+printk("10");
+
+ if ( HwDeviceExtension->jChipType >= XG20 )
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x97 , *pVBInfo->pXGINew_CR97 ) ;
+
+ /* 3.SetMemoryClock
+
+ if ( HwDeviceExtension->jChipType >= XG40 )
+ XGINew_RAMType = ( int )XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo) ;
+
+ if ( HwDeviceExtension->jChipType < XG40 )
+ XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ; */
+
+printk("11");
+
+ /* 4.SetDefExt1Regs begin */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x07 , *pVBInfo->pSR07 ) ;
+ if ( HwDeviceExtension->jChipType == XG27 )
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x40 , *pVBInfo->pSR40 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x41 , *pVBInfo->pSR41 ) ;
+ }
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x11 , 0x0F ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x1F , *pVBInfo->pSR1F ) ;
+ /* XGINew_SetReg1( pVBInfo->P3c4 , 0x20 , 0x20 ) ; */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x20 , 0xA0 ) ; /* alan, 2001/6/26 Frame buffer can read/write SR20 */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x36 , 0x70 ) ; /* Hsuan, 2006/01/01 H/W request for slow corner chip */
+ if ( HwDeviceExtension->jChipType == XG27 ) /* Alan 12/07/2006 */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x36 , *pVBInfo->pSR36 ) ;
+
+ /* SR11 = 0x0F ; */
+ /* XGINew_SetReg1( pVBInfo->P3c4 , 0x11 , SR11 ) ; */
+
+printk("12");
+
+ if ( HwDeviceExtension->jChipType < XG20 ) /* kuku 2004/06/25 */
+ {
+// /* Set AGP Rate */
+// temp1 = XGINew_GetReg1( pVBInfo->P3c4 , 0x3B ) ;
+// temp1 &= 0x02 ;
+// if ( temp1 == 0x02 )
+// {
+// XGINew_SetReg4( 0xcf8 , 0x80000000 ) ;
+// ChipsetID = XGINew_GetReg3( 0x0cfc ) ;
+// XGINew_SetReg4( 0xcf8 , 0x8000002C ) ;
+// VendorID = XGINew_GetReg3( 0x0cfc ) ;
+// VendorID &= 0x0000FFFF ;
+// XGINew_SetReg4( 0xcf8 , 0x8001002C ) ;
+// GraphicVendorID = XGINew_GetReg3( 0x0cfc ) ;
+// GraphicVendorID &= 0x0000FFFF;
+//
+// if ( ChipsetID == 0x7301039 )
+/// XGINew_SetReg1( pVBInfo->P3d4 , 0x5F , 0x09 ) ;
+//
+// ChipsetID &= 0x0000FFFF ;
+///
+// if ( ( ChipsetID == 0x700E ) || ( ChipsetID == 0x1022 ) || ( ChipsetID == 0x1106 ) || ( ChipsetID == 0x10DE ) )
+// {
+// if ( ChipsetID == 0x1106 )
+// {
+// if ( ( VendorID == 0x1019 ) && ( GraphicVendorID == 0x1019 ) )
+// XGINew_SetReg1( pVBInfo->P3d4 , 0x5F , 0x0D ) ;
+// else
+// XGINew_SetReg1( pVBInfo->P3d4 , 0x5F , 0x0B ) ;
+// }
+// else
+// XGINew_SetReg1( pVBInfo->P3d4 , 0x5F , 0x0B ) ;
+// }
+// }
+
+printk("13");
+
+ if ( HwDeviceExtension->jChipType >= XG40 )
+ {
+ /* Set AGP customize registers (in SetDefAGPRegs) Start */
+ for( i = 0x47 ; i <= 0x4C ; i++ )
+ XGINew_SetReg1( pVBInfo->P3d4 , i , pVBInfo->AGPReg[ i - 0x47 ] ) ;
+
+ for( i = 0x70 ; i <= 0x71 ; i++ )
+ XGINew_SetReg1( pVBInfo->P3d4 , i , pVBInfo->AGPReg[ 6 + i - 0x70 ] ) ;
+
+ for( i = 0x74 ; i <= 0x77 ; i++ )
+ XGINew_SetReg1( pVBInfo->P3d4 , i , pVBInfo->AGPReg[ 8 + i - 0x74 ] ) ;
+ /* Set AGP customize registers (in SetDefAGPRegs) End */
+ /*[Hsuan]2004/12/14 AGP Input Delay Adjustment on 850 */
+// XGINew_SetReg4( 0xcf8 , 0x80000000 ) ;
+// ChipsetID = XGINew_GetReg3( 0x0cfc ) ;
+// if ( ChipsetID == 0x25308086 )
+// XGINew_SetReg1( pVBInfo->P3d4 , 0x77 , 0xF0 ) ;
+
+ HwDeviceExtension->pQueryVGAConfigSpace( HwDeviceExtension , 0x50 , 0 , &Temp ) ; /* Get */
+ Temp >>= 20 ;
+ Temp &= 0xF ;
+
+ if ( Temp == 1 )
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x48 , 0x20 ) ; /* CR48 */
+ }
+printk("14");
+
+ if ( HwDeviceExtension->jChipType < XG40 )
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x49 , pVBInfo->CR49[ 0 ] ) ;
+ } /* != XG20 */
+
+ /* Set PCI */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x23 , *pVBInfo->pSR23 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x24 , *pVBInfo->pSR24 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x25 , pVBInfo->SR25[ 0 ] ) ;
+printk("15");
+
+ if ( HwDeviceExtension->jChipType < XG20 ) /* kuku 2004/06/25 */
+ {
+ /* Set VB */
+ XGI_UnLockCRT2( HwDeviceExtension, pVBInfo) ;
+ XGINew_SetRegANDOR( pVBInfo->Part0Port , 0x3F , 0xEF , 0x00 ) ; /* alan, disable VideoCapture */
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x00 , 0x00 ) ;
+ temp1 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x7B ) ; /* chk if BCLK>=100MHz */
+ temp = ( UCHAR )( ( temp1 >> 4 ) & 0x0F ) ;
+
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x02 , ( *pVBInfo->pCRT2Data_1_2 ) ) ;
+
+printk("16");
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x2E , 0x08 ) ; /* use VB */
+ } /* != XG20 */
+
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x27 , 0x1F ) ;
+
+ if ( ( HwDeviceExtension->jChipType == XG42 ) && XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo) != 0 ) /* Not DDR */
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , ( *pVBInfo->pSR31 & 0x3F ) | 0x40 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x32 , ( *pVBInfo->pSR32 & 0xFC ) | 0x01 ) ;
+ }
+ else
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , *pVBInfo->pSR31 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x32 , *pVBInfo->pSR32 ) ;
+ }
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x33 , *pVBInfo->pSR33 ) ;
+printk("17");
+
+/*
+ if ( HwDeviceExtension->jChipType >= XG40 )
+ SetPowerConsume ( HwDeviceExtension , pVBInfo->P3c4); */
+
+ if ( HwDeviceExtension->jChipType < XG20 ) /* kuku 2004/06/25 */
+ {
+ if ( XGI_BridgeIsOn( pVBInfo ) == 1 )
+ {
+ if ( pVBInfo->IF_DEF_LVDS == 0 )
+ {
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x00 , 0x1C ) ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x0D , *pVBInfo->pCRT2Data_4_D ) ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x0E , *pVBInfo->pCRT2Data_4_E ) ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x10 , *pVBInfo->pCRT2Data_4_10 ) ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x0F , 0x3F ) ;
+ }
+
+ XGI_LockCRT2( HwDeviceExtension, pVBInfo ) ;
+ }
+ } /* != XG20 */
+printk("18");
+
+ if ( HwDeviceExtension->jChipType < XG40 )
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x83 , 0x00 ) ;
+printk("181");
+
+ if ( HwDeviceExtension->bSkipSense == FALSE )
+ {
+printk("182");
+
+ XGI_SenseCRT1(pVBInfo) ;
+
+printk("183");
+ /* XGINew_DetectMonitor( HwDeviceExtension ) ; */
+pVBInfo->IF_DEF_CH7007 = 0;
+ if ( ( HwDeviceExtension->jChipType == XG21 ) && (pVBInfo->IF_DEF_CH7007) )
+ {
+printk("184");
+ XGI_GetSenseStatus( HwDeviceExtension , pVBInfo ) ; /* sense CRT2 */
+printk("185");
+
+ }
+ if ( HwDeviceExtension->jChipType == XG21 )
+ {
+printk("186");
+
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , ~Monitor1Sense , Monitor1Sense ) ; /* Z9 default has CRT */
+ temp = GetXG21FPBits( pVBInfo ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x37 , ~0x01, temp ) ;
+printk("187");
+
+ }
+ if ( HwDeviceExtension->jChipType == XG27 )
+ {
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , ~Monitor1Sense , Monitor1Sense ) ; /* Z9 default has CRT */
+ temp = GetXG27FPBits( pVBInfo ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x37 , ~0x03, temp ) ;
+ }
+ }
+printk("19");
+
+ if ( HwDeviceExtension->jChipType >= XG40 )
+ {
+ if ( HwDeviceExtension->jChipType >= XG40 )
+ {
+ XGINew_RAMType = ( int )XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo ) ;
+ }
+
+ XGINew_SetDRAMDefaultRegister340( HwDeviceExtension , pVBInfo->P3d4, pVBInfo ) ;
+
+ if ( HwDeviceExtension->bSkipDramSizing == TRUE )
+ {
+ pSR = HwDeviceExtension->pSR ;
+ if ( pSR!=NULL )
+ {
+ while( pSR->jIdx != 0xFF )
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , pSR->jIdx , pSR->jVal ) ;
+ pSR++ ;
+ }
+ }
+ /* XGINew_SetDRAMModeRegister340( pVBInfo ) ; */
+ } /* SkipDramSizing */
+ else
+ {
+#if 0
+ if ( HwDeviceExtension->jChipType == XG20 )
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , pVBInfo->SR15[0][XGINew_RAMType] ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , pVBInfo->SR15[1][XGINew_RAMType] ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x20 , 0x20 ) ;
+ }
+ else
+#endif
+{
+printk("20");
+
+ XGINew_SetDRAMSize_340( HwDeviceExtension , pVBInfo) ;
+}
+printk("21");
+
+ }
+ } /* XG40 */
+
+printk("22");
+
+
+ /* SetDefExt2Regs begin */
+/*
+ AGP = 1 ;
+ temp =( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x3A ) ;
+ temp &= 0x30 ;
+ if ( temp == 0x30 )
+ AGP = 0 ;
+
+ if ( AGP == 0 )
+ *pVBInfo->pSR21 &= 0xEF ;
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , *pVBInfo->pSR21 ) ;
+ if ( AGP == 1 )
+ *pVBInfo->pSR22 &= 0x20 ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x22 , *pVBInfo->pSR22 ) ;
+*/
+
+// base = 0x80000000 ;
+// OutPortLong( 0xcf8 , base ) ;
+// Temp = ( InPortLong( 0xcfc ) & 0xFFFF ) ;
+// if ( Temp == 0x1039 )
+// {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x22 , ( UCHAR )( ( *pVBInfo->pSR22 ) & 0xFE ) ) ;
+// }
+// else
+// {
+// XGINew_SetReg1( pVBInfo->P3c4 , 0x22 , *pVBInfo->pSR22 ) ;
+// }
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , *pVBInfo->pSR21 ) ;
+
+printk("23");
+
+
+ XGINew_ChkSenseStatus ( HwDeviceExtension , pVBInfo ) ;
+ XGINew_SetModeScratch ( HwDeviceExtension , pVBInfo ) ;
+
+printk("24");
+
+
+XGINew_SetReg1( pVBInfo->P3d4 , 0x8c , 0x87);
+XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x31);
+printk("25");
+
+ return( TRUE ) ;
+} /* end of init */
+
+
+
+
+
+/* ============== alan ====================== */
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_GetXG20DRAMType */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGINew_GetXG20DRAMType( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+ UCHAR data, temp ;
+
+ if ( HwDeviceExtension->jChipType < XG20 )
+ {
+ if ( *pVBInfo->pSoftSetting & SoftDRAMType )
+ {
+ data = *pVBInfo->pSoftSetting & 0x07 ;
+ return( data ) ;
+ }
+ else
+ {
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x39 ) & 0x02 ;
+
+ if ( data == 0 )
+ data = ( XGINew_GetReg1( pVBInfo->P3c4 , 0x3A ) & 0x02 ) >> 1 ;
+
+ return( data ) ;
+ }
+ }
+ else if ( HwDeviceExtension->jChipType == XG27 )
+ {
+ if ( *pVBInfo->pSoftSetting & SoftDRAMType )
+ {
+ data = *pVBInfo->pSoftSetting & 0x07 ;
+ return( data ) ;
+ }
+ temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x3B ) ;
+
+ if (( temp & 0x88 )==0x80) /* SR3B[7][3]MAA15 MAA11 (Power on Trapping) */
+ data = 0 ; /*DDR*/
+ else
+ data = 1 ; /*DDRII*/
+ return( data ) ;
+ }
+ else if ( HwDeviceExtension->jChipType == XG21 )
+ {
+ XGINew_SetRegAND( pVBInfo->P3d4 , 0xB4 , ~0x02 ) ; /* Independent GPIO control */
+ DelayUS(800);
+ XGINew_SetRegOR( pVBInfo->P3d4 , 0x4A , 0x80 ) ; /* Enable GPIOH read */
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) ; /* GPIOF 0:DVI 1:DVO */
+// HOTPLUG_SUPPORT
+// for current XG20 & XG21, GPIOH is floating, driver will fix DDR temporarily
+ if ( temp & 0x01 ) /* DVI read GPIOH */
+ data = 1 ; /*DDRII*/
+ else
+ data = 0 ; /*DDR*/
+//~HOTPLUG_SUPPORT
+ XGINew_SetRegOR( pVBInfo->P3d4 , 0xB4 , 0x02 ) ;
+ return( data ) ;
+ }
+ else
+ {
+ data = XGINew_GetReg1( pVBInfo->P3d4 , 0x97 ) & 0x01 ;
+
+ if ( data == 1 )
+ data ++ ;
+
+ return( data );
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_Get310DRAMType */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGINew_Get310DRAMType(PVB_DEVICE_INFO pVBInfo)
+{
+ UCHAR data ;
+
+ /* index = XGINew_GetReg1( pVBInfo->P3c4 , 0x1A ) ; */
+ /* index &= 07 ; */
+
+ if ( *pVBInfo->pSoftSetting & SoftDRAMType )
+ data = *pVBInfo->pSoftSetting & 0x03 ;
+ else
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x3a ) & 0x03 ;
+
+ return( data ) ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_Delay15us */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+/*
+void XGINew_Delay15us(ULONG ulMicrsoSec)
+{
+}
+*/
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SDR_MRS */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SDR_MRS( PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT data ;
+
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x16 ) ;
+ data &= 0x3F ; /* SR16 D7=0,D6=0 */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ; /* enable mode register set(MRS) low */
+ /* XGINew_Delay15us( 0x100 ) ; */
+ data |= 0x80 ; /* SR16 D7=1,D6=0 */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ; /* enable mode register set(MRS) high */
+ /* XGINew_Delay15us( 0x100 ) ; */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR1x_MRS_340 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR1x_MRS_340( ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+{
+ XGINew_SetReg1( P3c4 , 0x18 , 0x01 ) ;
+ XGINew_SetReg1( P3c4 , 0x19 , 0x20 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+ if ( *pVBInfo->pXGINew_DRAMTypeDefinition != 0x0C ) /* Samsung F Die */
+ {
+ DelayUS( 3000 ) ; /* Delay 67 x 3 Delay15us */
+ XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;
+ XGINew_SetReg1( P3c4 , 0x19 , 0x20 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+ }
+
+ DelayUS( 60 ) ;
+ XGINew_SetReg1( P3c4 , 0x18 , pVBInfo->SR15[ 2 ][ XGINew_RAMType ] ) ; /* SR18 */
+ XGINew_SetReg1( P3c4 , 0x19 , 0x01 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , pVBInfo->SR16[ 0 ] ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , pVBInfo->SR16[ 1 ] ) ;
+ DelayUS( 1000 ) ;
+ XGINew_SetReg1( P3c4 , 0x1B , 0x03 ) ;
+ DelayUS( 500 ) ;
+ XGINew_SetReg1( P3c4 , 0x18 , pVBInfo->SR15[ 2 ][ XGINew_RAMType ] ) ; /* SR18 */
+ XGINew_SetReg1( P3c4 , 0x19 , 0x00 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , pVBInfo->SR16[ 2 ] ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , pVBInfo->SR16[ 3 ] ) ;
+ XGINew_SetReg1( P3c4 , 0x1B , 0x00 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR2x_MRS_340 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR2x_MRS_340( ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+{
+ XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;
+ XGINew_SetReg1( P3c4 , 0x19 , 0x20 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+ DelayUS( 60 ) ;
+ XGINew_SetReg1( P3c4 , 0x18 , pVBInfo->SR15[ 2 ][ XGINew_RAMType ] ) ; /* SR18 */
+ /* XGINew_SetReg1( P3c4 , 0x18 , 0x31 ) ; */
+ XGINew_SetReg1( P3c4 , 0x19 , 0x01 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+ DelayUS( 1000 ) ;
+ XGINew_SetReg1( P3c4 , 0x1B , 0x03 ) ;
+ DelayUS( 500 ) ;
+ /* XGINew_SetReg1( P3c4 , 0x18 , 0x31 ) ; */
+ XGINew_SetReg1( P3c4 , 0x18 , pVBInfo->SR15[ 2 ][ XGINew_RAMType ] ) ; /* SR18 */
+ XGINew_SetReg1( P3c4 , 0x19 , 0x00 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+ XGINew_SetReg1( P3c4 , 0x1B , 0x00 ) ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDRII_Bootup_XG27 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDRII_Bootup_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension , ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+{
+ ULONG P3d4 = P3c4 + 0x10 ;
+ XGINew_RAMType = ( int )XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo ) ;
+ XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
+
+ /* Set Double Frequency */
+ /* XGINew_SetReg1( P3d4 , 0x97 , 0x11 ) ; */ /* CR97 */
+ XGINew_SetReg1( P3d4 , 0x97 , *pVBInfo->pXGINew_CR97 ) ; /* CR97 */
+
+ DelayUS( 200 ) ;
+
+ XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ; /* Set SR18 */ //EMRS2
+ XGINew_SetReg1( P3c4 , 0x19 , 0x80 ) ; /* Set SR19 */
+ XGINew_SetReg1( P3c4 , 0x16 , 0x20 ) ; /* Set SR16 */
+ DelayUS( 15 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0xA0 ) ; /* Set SR16 */
+ DelayUS( 15 ) ;
+
+ XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ; /* Set SR18 */ //EMRS3
+ XGINew_SetReg1( P3c4 , 0x19 , 0xC0 ) ; /* Set SR19 */
+ XGINew_SetReg1( P3c4 , 0x16 , 0x20 ) ; /* Set SR16 */
+ DelayUS( 15 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0xA0 ) ; /* Set SR16 */
+ DelayUS( 15) ;
+
+ XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ; /* Set SR18 */ //EMRS1
+ XGINew_SetReg1( P3c4 , 0x19 , 0x40 ) ; /* Set SR19 */
+ XGINew_SetReg1( P3c4 , 0x16 , 0x20 ) ; /* Set SR16 */
+ DelayUS( 30 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0xA0 ) ; /* Set SR16 */
+ DelayUS( 15 ) ;
+
+ XGINew_SetReg1( P3c4 , 0x18 , 0x42 ) ; /* Set SR18 */ //MRS, DLL Enable
+ XGINew_SetReg1( P3c4 , 0x19 , 0x0A ) ; /* Set SR19 */
+ XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ; /* Set SR16 */
+ DelayUS( 30 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ; /* Set SR16 */
+ XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ; /* Set SR16 */
+ /* DelayUS( 15 ) ; */
+
+ XGINew_SetReg1( P3c4 , 0x1B , 0x04 ) ; /* Set SR1B */
+ DelayUS( 60 ) ;
+ XGINew_SetReg1( P3c4 , 0x1B , 0x00 ) ; /* Set SR1B */
+
+ XGINew_SetReg1( P3c4 , 0x18 , 0x42 ) ; /* Set SR18 */ //MRS, DLL Reset
+ XGINew_SetReg1( P3c4 , 0x19 , 0x08 ) ; /* Set SR19 */
+ XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ; /* Set SR16 */
+
+ DelayUS( 30 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x83 ) ; /* Set SR16 */
+ DelayUS( 15 ) ;
+
+ XGINew_SetReg1( P3c4 , 0x18 , 0x80 ) ; /* Set SR18 */ //MRS, ODT
+ XGINew_SetReg1( P3c4 , 0x19 , 0x46 ) ; /* Set SR19 */
+ XGINew_SetReg1( P3c4 , 0x16 , 0x20 ) ; /* Set SR16 */
+ DelayUS( 30 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0xA0 ) ; /* Set SR16 */
+ DelayUS( 15 ) ;
+
+ XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ; /* Set SR18 */ //EMRS
+ XGINew_SetReg1( P3c4 , 0x19 , 0x40 ) ; /* Set SR19 */
+ XGINew_SetReg1( P3c4 , 0x16 , 0x20 ) ; /* Set SR16 */
+ DelayUS( 30 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0xA0 ) ; /* Set SR16 */
+ DelayUS( 15 ) ;
+
+ XGINew_SetReg1( P3c4 , 0x1B , 0x04 ) ; /* Set SR1B refresh control 000:close; 010:open */
+ DelayUS( 200 ) ;
+
+
+}
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR2_MRS_XG20 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR2_MRS_XG20( PXGI_HW_DEVICE_INFO HwDeviceExtension , ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+{
+ ULONG P3d4 = P3c4 + 0x10 ;
+
+ XGINew_RAMType = ( int )XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo ) ;
+ XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
+
+ XGINew_SetReg1( P3d4 , 0x97 , 0x11 ) ; /* CR97 */
+
+ DelayUS( 200 ) ;
+ XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ; /* EMRS2 */
+ XGINew_SetReg1( P3c4 , 0x19 , 0x80 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+
+ XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ; /* EMRS3 */
+ XGINew_SetReg1( P3c4 , 0x19 , 0xC0 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+
+ XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ; /* EMRS1 */
+ XGINew_SetReg1( P3c4 , 0x19 , 0x40 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+
+ // XGINew_SetReg1( P3c4 , 0x18 , 0x52 ) ; /* MRS1 */
+ XGINew_SetReg1( P3c4 , 0x18 , 0x42 ) ; /* MRS1 */
+ XGINew_SetReg1( P3c4 , 0x19 , 0x02 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+
+ DelayUS( 15 ) ;
+ XGINew_SetReg1( P3c4 , 0x1B , 0x04 ) ; /* SR1B */
+ DelayUS( 30 ) ;
+ XGINew_SetReg1( P3c4 , 0x1B , 0x00 ) ; /* SR1B */
+ DelayUS( 100 ) ;
+
+ //XGINew_SetReg1( P3c4 , 0x18 , 0x52 ) ; /* MRS2 */
+ XGINew_SetReg1( P3c4 , 0x18 , 0x42 ) ; /* MRS1 */
+ XGINew_SetReg1( P3c4 , 0x19 , 0x00 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+
+ DelayUS( 200 ) ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR2_MRS_XG20 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR2_MRS_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension , ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+{
+ ULONG P3d4 = P3c4 + 0x10 ;
+
+ XGINew_RAMType = ( int )XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo ) ;
+ XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
+
+ XGINew_SetReg1( P3d4 , 0x97 , 0x11 ) ; /* CR97 */
+ DelayUS( 200 ) ;
+ XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ; /* EMRS2 */
+ XGINew_SetReg1( P3c4 , 0x19 , 0x80 ) ;
+
+ XGINew_SetReg1( P3c4 , 0x16 , 0x10 ) ;
+ DelayUS( 15 ) ; ////06/11/23 XG27 A0 for CKE enable
+ XGINew_SetReg1( P3c4 , 0x16 , 0x90 ) ;
+
+ XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ; /* EMRS3 */
+ XGINew_SetReg1( P3c4 , 0x19 , 0xC0 ) ;
+
+ XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+ DelayUS( 15 ) ; ////06/11/22 XG27 A0
+ XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+
+ XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ; /* EMRS1 */
+ XGINew_SetReg1( P3c4 , 0x19 , 0x40 ) ;
+
+ XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+ DelayUS( 15 ) ; ////06/11/22 XG27 A0
+ XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+ XGINew_SetReg1( P3c4 , 0x18 , 0x42 ) ; /* MRS1 */
+ XGINew_SetReg1( P3c4 , 0x19 , 0x06 ) ; ////[Billy]06/11/22 DLL Reset for XG27 Hynix DRAM
+
+ XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+ DelayUS( 15 ) ; ////06/11/23 XG27 A0
+ XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+ DelayUS( 30 ) ; ////06/11/23 XG27 A0 Start Auto-PreCharge
+ XGINew_SetReg1( P3c4 , 0x1B , 0x04 ) ; /* SR1B */
+ DelayUS( 60 ) ;
+ XGINew_SetReg1( P3c4 , 0x1B , 0x00 ) ; /* SR1B */
+
+
+ XGINew_SetReg1( P3c4 , 0x18 , 0x42 ) ; /* MRS1 */
+ XGINew_SetReg1( P3c4 , 0x19 , 0x04 ) ; //// DLL without Reset for XG27 Hynix DRAM
+
+ XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+ DelayUS( 30 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+ XGINew_SetReg1( P3c4 , 0x18 , 0x80 ); ////XG27 OCD ON
+ XGINew_SetReg1( P3c4 , 0x19 , 0x46 );
+
+ XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+ DelayUS( 30 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+ XGINew_SetReg1( P3c4 , 0x18 , 0x00 );
+ XGINew_SetReg1( P3c4 , 0x19 , 0x40 );
+
+ XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+ DelayUS( 30 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+ DelayUS( 15 ) ; ////Start Auto-PreCharge
+ XGINew_SetReg1( P3c4 , 0x1B , 0x04 ) ; /* SR1B */
+ DelayUS( 200 ) ;
+ XGINew_SetReg1( P3c4 , 0x1B , 0x03 ) ; /* SR1B */
+
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR1x_DefaultRegister */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR1x_DefaultRegister( PXGI_HW_DEVICE_INFO HwDeviceExtension , ULONG Port , PVB_DEVICE_INFO pVBInfo)
+{
+ ULONG P3d4 = Port ,
+ P3c4 = Port - 0x10 ;
+
+ if ( HwDeviceExtension->jChipType >= XG20 )
+ {
+ XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
+ XGINew_SetReg1( P3d4 , 0x82 , pVBInfo->CR40[ 11 ][ XGINew_RAMType ] ) ; /* CR82 */
+ XGINew_SetReg1( P3d4 , 0x85 , pVBInfo->CR40[ 12 ][ XGINew_RAMType ] ) ; /* CR85 */
+ XGINew_SetReg1( P3d4 , 0x86 , pVBInfo->CR40[ 13 ][ XGINew_RAMType ] ) ; /* CR86 */
+
+ XGINew_SetReg1( P3d4 , 0x98 , 0x01 ) ;
+ XGINew_SetReg1( P3d4 , 0x9A , 0x02 ) ;
+
+ XGINew_DDR1x_MRS_XG20( P3c4 , pVBInfo) ;
+ }
+ else
+ {
+ XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
+
+ switch( HwDeviceExtension->jChipType )
+ {
+ case XG41:
+ case XG42:
+ XGINew_SetReg1( P3d4 , 0x82 , pVBInfo->CR40[ 11 ][ XGINew_RAMType ] ) ; /* CR82 */
+ XGINew_SetReg1( P3d4 , 0x85 , pVBInfo->CR40[ 12 ][ XGINew_RAMType ] ) ; /* CR85 */
+ XGINew_SetReg1( P3d4 , 0x86 , pVBInfo->CR40[ 13 ][ XGINew_RAMType ] ) ; /* CR86 */
+ break ;
+ default:
+ XGINew_SetReg1( P3d4 , 0x82 , 0x88 ) ;
+ XGINew_SetReg1( P3d4 , 0x86 , 0x00 ) ;
+ XGINew_GetReg1( P3d4 , 0x86 ) ; /* Insert read command for delay */
+ XGINew_SetReg1( P3d4 , 0x86 , 0x88 ) ;
+ XGINew_GetReg1( P3d4 , 0x86 ) ;
+ XGINew_SetReg1( P3d4 , 0x86 , pVBInfo->CR40[ 13 ][ XGINew_RAMType ] ) ;
+ XGINew_SetReg1( P3d4 , 0x82 , 0x77 ) ;
+ XGINew_SetReg1( P3d4 , 0x85 , 0x00 ) ;
+ XGINew_GetReg1( P3d4 , 0x85 ) ; /* Insert read command for delay */
+ XGINew_SetReg1( P3d4 , 0x85 , 0x88 ) ;
+ XGINew_GetReg1( P3d4 , 0x85 ) ; /* Insert read command for delay */
+ XGINew_SetReg1( P3d4 , 0x85 , pVBInfo->CR40[ 12 ][ XGINew_RAMType ] ) ; /* CR85 */
+ XGINew_SetReg1( P3d4 , 0x82 , pVBInfo->CR40[ 11 ][ XGINew_RAMType ] ) ; /* CR82 */
+ break ;
+ }
+
+ XGINew_SetReg1( P3d4 , 0x97 , 0x00 ) ;
+ XGINew_SetReg1( P3d4 , 0x98 , 0x01 ) ;
+ XGINew_SetReg1( P3d4 , 0x9A , 0x02 ) ;
+ XGINew_DDR1x_MRS_340( P3c4 , pVBInfo ) ;
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR2x_DefaultRegister */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR2x_DefaultRegister( PXGI_HW_DEVICE_INFO HwDeviceExtension , ULONG Port ,PVB_DEVICE_INFO pVBInfo)
+{
+ ULONG P3d4 = Port ,
+ P3c4 = Port - 0x10 ;
+
+ XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
+
+ /* 20040906 Hsuan modify CR82, CR85, CR86 for XG42 */
+ switch( HwDeviceExtension->jChipType )
+ {
+ case XG41:
+ case XG42:
+ XGINew_SetReg1( P3d4 , 0x82 , pVBInfo->CR40[ 11 ][ XGINew_RAMType ] ) ; /* CR82 */
+ XGINew_SetReg1( P3d4 , 0x85 , pVBInfo->CR40[ 12 ][ XGINew_RAMType ] ) ; /* CR85 */
+ XGINew_SetReg1( P3d4 , 0x86 , pVBInfo->CR40[ 13 ][ XGINew_RAMType ] ) ; /* CR86 */
+ break ;
+ default:
+ /* keep following setting sequence, each setting in the same reg insert idle */
+ XGINew_SetReg1( P3d4 , 0x82 , 0x88 ) ;
+ XGINew_SetReg1( P3d4 , 0x86 , 0x00 ) ;
+ XGINew_GetReg1( P3d4 , 0x86 ) ; /* Insert read command for delay */
+ XGINew_SetReg1( P3d4 , 0x86 , 0x88 ) ;
+ XGINew_SetReg1( P3d4 , 0x82 , 0x77 ) ;
+ XGINew_SetReg1( P3d4 , 0x85 , 0x00 ) ;
+ XGINew_GetReg1( P3d4 , 0x85 ) ; /* Insert read command for delay */
+ XGINew_SetReg1( P3d4 , 0x85 , 0x88 ) ;
+ XGINew_GetReg1( P3d4 , 0x85 ) ; /* Insert read command for delay */
+ XGINew_SetReg1( P3d4 , 0x85 , pVBInfo->CR40[ 12 ][ XGINew_RAMType ] ) ; /* CR85 */
+ XGINew_SetReg1( P3d4 , 0x82 , pVBInfo->CR40[ 11 ][ XGINew_RAMType ] ) ; /* CR82 */
+ }
+ XGINew_SetReg1( P3d4 , 0x97 , 0x11 ) ;
+ if ( HwDeviceExtension->jChipType == XG42 )
+ {
+ XGINew_SetReg1( P3d4 , 0x98 , 0x01 ) ;
+ }
+ else
+ {
+ XGINew_SetReg1( P3d4 , 0x98 , 0x03 ) ;
+ }
+ XGINew_SetReg1( P3d4 , 0x9A , 0x02 ) ;
+
+ XGINew_DDR2x_MRS_340( P3c4 , pVBInfo ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR2_DefaultRegister */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR2_DefaultRegister( PXGI_HW_DEVICE_INFO HwDeviceExtension, ULONG Port , PVB_DEVICE_INFO pVBInfo)
+{
+ ULONG P3d4 = Port ,
+ P3c4 = Port - 0x10 ;
+
+ /* keep following setting sequence, each setting in the same reg insert idle */
+ XGINew_SetReg1( P3d4 , 0x82 , 0x77 ) ;
+ XGINew_SetReg1( P3d4 , 0x86 , 0x00 ) ;
+ XGINew_GetReg1( P3d4 , 0x86 ) ; /* Insert read command for delay */
+ XGINew_SetReg1( P3d4 , 0x86 , 0x88 ) ;
+ XGINew_GetReg1( P3d4 , 0x86 ) ; /* Insert read command for delay */
+ XGINew_SetReg1( P3d4 , 0x86 , pVBInfo->CR40[ 13 ][ XGINew_RAMType ] ) ; /* CR86 */
+ XGINew_SetReg1( P3d4 , 0x82 , 0x77 ) ;
+ XGINew_SetReg1( P3d4 , 0x85 , 0x00 ) ;
+ XGINew_GetReg1( P3d4 , 0x85 ) ; /* Insert read command for delay */
+ XGINew_SetReg1( P3d4 , 0x85 , 0x88 ) ;
+ XGINew_GetReg1( P3d4 , 0x85 ) ; /* Insert read command for delay */
+ XGINew_SetReg1( P3d4 , 0x85 , pVBInfo->CR40[ 12 ][ XGINew_RAMType ] ) ; /* CR85 */
+ if ( HwDeviceExtension->jChipType == XG27 )
+ XGINew_SetReg1( P3d4 , 0x82 , pVBInfo->CR40[ 11 ][ XGINew_RAMType ] ) ; /* CR82 */
+ else
+ XGINew_SetReg1( P3d4 , 0x82 , 0xA8 ) ; /* CR82 */
+
+ XGINew_SetReg1( P3d4 , 0x98 , 0x01 ) ;
+ XGINew_SetReg1( P3d4 , 0x9A , 0x02 ) ;
+ if ( HwDeviceExtension->jChipType == XG27 )
+ XGINew_DDRII_Bootup_XG27( HwDeviceExtension , P3c4 , pVBInfo) ;
+ else
+ XGINew_DDR2_MRS_XG20( HwDeviceExtension , P3c4, pVBInfo ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMDefaultRegister340 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetDRAMDefaultRegister340( PXGI_HW_DEVICE_INFO HwDeviceExtension , ULONG Port , PVB_DEVICE_INFO pVBInfo)
+{
+ UCHAR temp , temp1 , temp2 , temp3 ,
+ i , j , k ;
+
+ ULONG P3d4 = Port ,
+ P3c4 = Port - 0x10 ;
+
+ XGINew_SetReg1( P3d4 , 0x6D , pVBInfo->CR40[ 8 ][ XGINew_RAMType ] ) ;
+ XGINew_SetReg1( P3d4 , 0x68 , pVBInfo->CR40[ 5 ][ XGINew_RAMType ] ) ;
+ XGINew_SetReg1( P3d4 , 0x69 , pVBInfo->CR40[ 6 ][ XGINew_RAMType ] ) ;
+ XGINew_SetReg1( P3d4 , 0x6A , pVBInfo->CR40[ 7 ][ XGINew_RAMType ] ) ;
+
+ temp2 = 0 ;
+ for( i = 0 ; i < 4 ; i++ )
+ {
+ temp = pVBInfo->CR6B[ XGINew_RAMType ][ i ] ; /* CR6B DQS fine tune delay */
+ for( j = 0 ; j < 4 ; j++ )
+ {
+ temp1 = ( ( temp >> ( 2 * j ) ) & 0x03 ) << 2 ;
+ temp2 |= temp1 ;
+ XGINew_SetReg1( P3d4 , 0x6B , temp2 ) ;
+ XGINew_GetReg1( P3d4 , 0x6B ) ; /* Insert read command for delay */
+ temp2 &= 0xF0 ;
+ temp2 += 0x10 ;
+ }
+ }
+
+ temp2 = 0 ;
+ for( i = 0 ; i < 4 ; i++ )
+ {
+ temp = pVBInfo->CR6E[ XGINew_RAMType ][ i ] ; /* CR6E DQM fine tune delay */
+ for( j = 0 ; j < 4 ; j++ )
+ {
+ temp1 = ( ( temp >> ( 2 * j ) ) & 0x03 ) << 2 ;
+ temp2 |= temp1 ;
+ XGINew_SetReg1( P3d4 , 0x6E , temp2 ) ;
+ XGINew_GetReg1( P3d4 , 0x6E ) ; /* Insert read command for delay */
+ temp2 &= 0xF0 ;
+ temp2 += 0x10 ;
+ }
+ }
+
+ temp3 = 0 ;
+ for( k = 0 ; k < 4 ; k++ )
+ {
+ XGINew_SetRegANDOR( P3d4 , 0x6E , 0xFC , temp3 ) ; /* CR6E_D[1:0] select channel */
+ temp2 = 0 ;
+ for( i = 0 ; i < 8 ; i++ )
+ {
+ temp = pVBInfo->CR6F[ XGINew_RAMType ][ 8 * k + i ] ; /* CR6F DQ fine tune delay */
+ for( j = 0 ; j < 4 ; j++ )
+ {
+ temp1 = ( temp >> ( 2 * j ) ) & 0x03 ;
+ temp2 |= temp1 ;
+ XGINew_SetReg1( P3d4 , 0x6F , temp2 ) ;
+ XGINew_GetReg1( P3d4 , 0x6F ) ; /* Insert read command for delay */
+ temp2 &= 0xF8 ;
+ temp2 += 0x08 ;
+ }
+ }
+ temp3 += 0x01 ;
+ }
+
+ XGINew_SetReg1( P3d4 , 0x80 , pVBInfo->CR40[ 9 ][ XGINew_RAMType ] ) ; /* CR80 */
+ XGINew_SetReg1( P3d4 , 0x81 , pVBInfo->CR40[ 10 ][ XGINew_RAMType ] ) ; /* CR81 */
+
+ temp2 = 0x80 ;
+ temp = pVBInfo->CR89[ XGINew_RAMType ][ 0 ] ; /* CR89 terminator type select */
+ for( j = 0 ; j < 4 ; j++ )
+ {
+ temp1 = ( temp >> ( 2 * j ) ) & 0x03 ;
+ temp2 |= temp1 ;
+ XGINew_SetReg1( P3d4 , 0x89 , temp2 ) ;
+ XGINew_GetReg1( P3d4 , 0x89 ) ; /* Insert read command for delay */
+ temp2 &= 0xF0 ;
+ temp2 += 0x10 ;
+ }
+
+ temp = pVBInfo->CR89[ XGINew_RAMType ][ 1 ] ;
+ temp1 = temp & 0x03 ;
+ temp2 |= temp1 ;
+ XGINew_SetReg1( P3d4 , 0x89 , temp2 ) ;
+
+ temp = pVBInfo->CR40[ 3 ][ XGINew_RAMType ] ;
+ temp1 = temp & 0x0F ;
+ temp2 = ( temp >> 4 ) & 0x07 ;
+ temp3 = temp & 0x80 ;
+ XGINew_SetReg1( P3d4 , 0x45 , temp1 ) ; /* CR45 */
+ XGINew_SetReg1( P3d4 , 0x99 , temp2 ) ; /* CR99 */
+ XGINew_SetRegOR( P3d4 , 0x40 , temp3 ) ; /* CR40_D[7] */
+ XGINew_SetReg1( P3d4 , 0x41 , pVBInfo->CR40[ 0 ][ XGINew_RAMType ] ) ; /* CR41 */
+
+ if ( HwDeviceExtension->jChipType == XG27 )
+ XGINew_SetReg1( P3d4 , 0x8F , *pVBInfo->pCR8F ) ; /* CR8F */
+
+ for( j = 0 ; j <= 6 ; j++ )
+ XGINew_SetReg1( P3d4 , ( 0x90 + j ) , pVBInfo->CR40[ 14 + j ][ XGINew_RAMType ] ) ; /* CR90 - CR96 */
+
+ for( j = 0 ; j <= 2 ; j++ )
+ XGINew_SetReg1( P3d4 , ( 0xC3 + j ) , pVBInfo->CR40[ 21 + j ][ XGINew_RAMType ] ) ; /* CRC3 - CRC5 */
+
+ for( j = 0 ; j < 2 ; j++ )
+ XGINew_SetReg1( P3d4 , ( 0x8A + j ) , pVBInfo->CR40[ 1 + j ][ XGINew_RAMType ] ) ; /* CR8A - CR8B */
+
+ if ( ( HwDeviceExtension->jChipType == XG41 ) || ( HwDeviceExtension->jChipType == XG42 ) )
+ XGINew_SetReg1( P3d4 , 0x8C , 0x87 ) ;
+
+ XGINew_SetReg1( P3d4 , 0x59 , pVBInfo->CR40[ 4 ][ XGINew_RAMType ] ) ; /* CR59 */
+
+ XGINew_SetReg1( P3d4 , 0x83 , 0x09 ) ; /* CR83 */
+ XGINew_SetReg1( P3d4 , 0x87 , 0x00 ) ; /* CR87 */
+ XGINew_SetReg1( P3d4 , 0xCF , *pVBInfo->pCRCF ) ; /* CRCF */
+ if ( XGINew_RAMType )
+ {
+ //XGINew_SetReg1( P3c4 , 0x17 , 0xC0 ) ; /* SR17 DDRII */
+ XGINew_SetReg1( P3c4 , 0x17 , 0x80 ) ; /* SR17 DDRII */
+ if ( HwDeviceExtension->jChipType == XG27 )
+ XGINew_SetReg1( P3c4 , 0x17 , 0x02 ) ; /* SR17 DDRII */
+
+ }
+ else
+ XGINew_SetReg1( P3c4 , 0x17 , 0x00 ) ; /* SR17 DDR */
+ XGINew_SetReg1( P3c4 , 0x1A , 0x87 ) ; /* SR1A */
+
+ temp = XGINew_GetXG20DRAMType( HwDeviceExtension, pVBInfo) ;
+ if( temp == 0 )
+ XGINew_DDR1x_DefaultRegister( HwDeviceExtension, P3d4, pVBInfo ) ;
+ else
+ {
+ XGINew_SetReg1( P3d4 , 0xB0 , 0x80 ) ; /* DDRII Dual frequency mode */
+ XGINew_DDR2_DefaultRegister( HwDeviceExtension, P3d4, pVBInfo ) ;
+ }
+ XGINew_SetReg1( P3c4 , 0x1B , pVBInfo->SR15[ 3 ][ XGINew_RAMType ] ) ; /* SR1B */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR_MRS */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR_MRS(PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT data ;
+
+ PUCHAR volatile pVideoMemory = ( PUCHAR )pVBInfo->ROMAddr ;
+
+ /* SR16 <- 1F,DF,2F,AF */
+ /* yriver modified SR16 <- 0F,DF,0F,AF */
+ /* enable DLL of DDR SD/SGRAM , SR16 D4=1 */
+ data = pVideoMemory[ 0xFB ] ;
+ /* data = XGINew_GetReg1( pVBInfo->P3c4 , 0x16 ) ; */
+
+ data &= 0x0F ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+ data |= 0xC0 ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+ data &= 0x0F ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+ data |= 0x80 ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+ data &= 0x0F ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+ data |= 0xD0 ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+ data &= 0x0F ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+ data |= 0xA0 ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+/*
+ else {
+ data &= 0x0F;
+ data |= 0x10;
+ XGINew_SetReg1(pVBInfo->P3c4,0x16,data);
+
+ if (!(pVBInfo->SR15[1][XGINew_RAMType] & 0x10))
+ {
+ data &= 0x0F;
+ }
+
+ data |= 0xC0;
+ XGINew_SetReg1(pVBInfo->P3c4,0x16,data);
+
+
+ data &= 0x0F;
+ data |= 0x20;
+ XGINew_SetReg1(pVBInfo->P3c4,0x16,data);
+ if (!(pVBInfo->SR15[1][XGINew_RAMType] & 0x10))
+ {
+ data &= 0x0F;
+ }
+
+ data |= 0x80;
+ XGINew_SetReg1(pVBInfo->P3c4,0x16,data);
+ }
+*/
+}
+
+
+/* check if read cache pointer is correct */
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_VerifyMclk */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_VerifyMclk( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+ PUCHAR pVideoMemory = pVBInfo->FBAddr ;
+ UCHAR i , j ;
+ USHORT Temp , SR21 ;
+
+ pVideoMemory[ 0 ] = 0xaa ; /* alan */
+ pVideoMemory[ 16 ] = 0x55 ; /* note: PCI read cache is off */
+
+ if ( ( pVideoMemory[ 0 ] != 0xaa ) || ( pVideoMemory[ 16 ] != 0x55 ) )
+ {
+ for( i = 0 , j = 16 ; i < 2 ; i++ , j += 16 )
+ {
+ SR21 = XGINew_GetReg1( pVBInfo->P3c4 , 0x21 ) ;
+ Temp = SR21 & 0xFB ; /* disable PCI post write buffer empty gating */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , Temp ) ;
+
+ Temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x3C ) ;
+ Temp |= 0x01 ; /* MCLK reset */
+
+
+ Temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x3C ) ;
+ Temp &= 0xFE ; /* MCLK normal operation */
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , SR21 ) ;
+
+ pVideoMemory[ 16 + j ] = j ;
+ if ( pVideoMemory[ 16 + j ] == j )
+ {
+ pVideoMemory[ j ] = j ;
+ break ;
+ }
+ }
+ }
+}
+
+
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMSize_340 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetDRAMSize_340( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT data ;
+
+ pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+ pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+
+ XGISetModeNew( HwDeviceExtension , 0x2e ) ;
+
+
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x21 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , ( USHORT )( data & 0xDF ) ) ; /* disable read cache */
+ XGI_DisplayOff( HwDeviceExtension, pVBInfo );
+
+ /*data = XGINew_GetReg1( pVBInfo->P3c4 , 0x1 ) ;*/
+ /*data |= 0x20 ;*/
+ /*XGINew_SetReg1( pVBInfo->P3c4 , 0x01 , data ) ;*/ /* Turn OFF Display */
+ XGINew_DDRSizing340( HwDeviceExtension, pVBInfo ) ;
+ data=XGINew_GetReg1( pVBInfo->P3c4 , 0x21 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , ( USHORT )( data | 0x20 ) ) ; /* enable read cache */
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetDRAMSize_310( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT data ;
+ pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ,
+ pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+#ifdef XGI301
+ /* XGINew_SetReg1( pVBInfo->P3d4 , 0x30 , 0x40 ) ; */
+#endif
+
+#ifdef XGI302 /* alan,should change value */
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x30 , 0x4D ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x31 , 0xc0 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x34 , 0x3F ) ;
+#endif
+
+ XGISetModeNew( HwDeviceExtension , 0x2e ) ;
+
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x21 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , ( USHORT )( data & 0xDF ) ) ; /* disable read cache */
+
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x1 ) ;
+ data |= 0x20 ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x01 , data ) ; /* Turn OFF Display */
+
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x16 ) ;
+
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , ( USHORT )( data | 0x0F ) ) ; /* assume lowest speed DRAM */
+
+ XGINew_SetDRAMModeRegister( pVBInfo ) ;
+ XGINew_DisableRefresh( HwDeviceExtension, pVBInfo ) ;
+ XGINew_CheckBusWidth_310( pVBInfo) ;
+ XGINew_VerifyMclk( HwDeviceExtension, pVBInfo ) ; /* alan 2000/7/3 */
+
+
+
+ if ( XGINew_Get310DRAMType( pVBInfo ) < 2 )
+ {
+ XGINew_SDRSizing( pVBInfo ) ;
+ }
+ else
+ {
+ XGINew_DDRSizing( pVBInfo) ;
+ }
+
+
+
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , pVBInfo->SR15[ 1 ][ XGINew_RAMType ] ) ; /* restore SR16 */
+
+ XGINew_EnableRefresh( HwDeviceExtension, pVBInfo ) ;
+ data=XGINew_GetReg1( pVBInfo->P3c4 ,0x21 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , ( USHORT )( data | 0x20 ) ) ; /* enable read cache */
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMModeRegister340 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+
+void XGINew_SetDRAMModeRegister340( PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+ UCHAR data ;
+ VB_DEVICE_INFO VBINF;
+ PVB_DEVICE_INFO pVBInfo = &VBINF;
+ pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+ pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+ pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+ pVBInfo->ISXPDOS = 0 ;
+
+ pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+ pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+ pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+ pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+ pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+ pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+ pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+ pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+ pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+ pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+ pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+ pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+ pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+ pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+ pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+ pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+ pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+ if ( HwDeviceExtension->jChipType < XG20 ) /* kuku 2004/06/25 */
+ XGI_GetVBType( pVBInfo ) ; /* Run XGI_GetVBType before InitTo330Pointer */
+
+ InitTo330Pointer(HwDeviceExtension->jChipType,pVBInfo);
+
+ ReadVBIOSTablData( HwDeviceExtension->jChipType , pVBInfo) ;
+
+ if ( XGINew_GetXG20DRAMType( HwDeviceExtension, pVBInfo) == 0 )
+ {
+ data = ( XGINew_GetReg1( pVBInfo->P3c4 , 0x39 ) & 0x02 ) >> 1 ;
+ if ( data == 0x01 )
+ XGINew_DDR2x_MRS_340( pVBInfo->P3c4, pVBInfo ) ;
+ else
+ XGINew_DDR1x_MRS_340( pVBInfo->P3c4, pVBInfo ) ;
+ }
+ else
+ XGINew_DDR2_MRS_XG20( HwDeviceExtension, pVBInfo->P3c4, pVBInfo);
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , 0x03 ) ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMModeRegister */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetDRAMModeRegister( PVB_DEVICE_INFO pVBInfo)
+{
+ if ( XGINew_Get310DRAMType( pVBInfo ) < 2 )
+ {
+ XGINew_SDR_MRS(pVBInfo ) ;
+ }
+ else
+ {
+ /* SR16 <- 0F,CF,0F,8F */
+ XGINew_DDR_MRS( pVBInfo ) ;
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DisableRefresh */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DisableRefresh( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT data ;
+
+
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x1B ) ;
+ data &= 0xF8 ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , data ) ;
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_EnableRefresh */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_EnableRefresh( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , pVBInfo->SR15[ 3 ][ XGINew_RAMType ] ) ; /* SR1B */
+
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DisableChannelInterleaving */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DisableChannelInterleaving( int index , USHORT XGINew_DDRDRAM_TYPE[][ 5 ] , PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT data ;
+
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x15 ) ;
+ data &= 0x1F ;
+
+ switch( XGINew_DDRDRAM_TYPE[ index ][ 3 ] )
+ {
+ case 64:
+ data |= 0 ;
+ break ;
+ case 32:
+ data |= 0x20 ;
+ break ;
+ case 16:
+ data |= 0x40 ;
+ break ;
+ case 4:
+ data |= 0x60 ;
+ break ;
+ default:
+ break ;
+ }
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x15 , data ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMSizingType */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetDRAMSizingType( int index , USHORT DRAMTYPE_TABLE[][ 5 ] ,PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT data ;
+
+ data = DRAMTYPE_TABLE[ index ][ 4 ] ;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x13 , 0x80 , data ) ;
+ DelayUS( 15 ) ;
+ /* should delay 50 ns */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckBusWidth_310 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_CheckBusWidth_310( PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT data ;
+ PULONG volatile pVideoMemory ;
+
+ pVideoMemory = (PULONG) pVBInfo->FBAddr;
+
+ if ( XGINew_Get310DRAMType( pVBInfo ) < 2 )
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x00 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x12 ) ;
+ /* should delay */
+ XGINew_SDR_MRS( pVBInfo ) ;
+
+ XGINew_ChannelAB = 0 ;
+ XGINew_DataBusWidth = 128 ;
+ pVideoMemory[ 0 ] = 0x01234567L ;
+ pVideoMemory[ 1 ] = 0x456789ABL ;
+ pVideoMemory[ 2 ] = 0x89ABCDEFL ;
+ pVideoMemory[ 3 ] = 0xCDEF0123L ;
+ pVideoMemory[ 4 ] = 0x55555555L ;
+ pVideoMemory[ 5 ] = 0x55555555L ;
+ pVideoMemory[ 6 ] = 0xFFFFFFFFL ;
+ pVideoMemory[ 7 ] = 0xFFFFFFFFL ;
+
+ if ( ( pVideoMemory[ 3 ] != 0xCDEF0123L ) || ( pVideoMemory[ 2 ] != 0x89ABCDEFL ) )
+ {
+ /* ChannelA64Bit */
+ XGINew_DataBusWidth = 64 ;
+ XGINew_ChannelAB = 0 ;
+ data=XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , ( USHORT )( data & 0xFD ) ) ;
+ }
+
+ if ( ( pVideoMemory[ 1 ] != 0x456789ABL ) || ( pVideoMemory[ 0 ] != 0x01234567L ) )
+ {
+ /* ChannelB64Bit */
+ XGINew_DataBusWidth = 64 ;
+ XGINew_ChannelAB = 1 ;
+ data=XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , ( USHORT )( ( data & 0xFD ) | 0x01 ) ) ;
+ }
+
+ return ;
+ }
+ else
+ {
+ /* DDR Dual channel */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x00 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x02 ) ; /* Channel A, 64bit */
+ /* should delay */
+ XGINew_DDR_MRS( pVBInfo ) ;
+
+ XGINew_ChannelAB = 0 ;
+ XGINew_DataBusWidth = 64 ;
+ pVideoMemory[ 0 ] = 0x01234567L ;
+ pVideoMemory[ 1 ] = 0x456789ABL ;
+ pVideoMemory[ 2 ] = 0x89ABCDEFL ;
+ pVideoMemory[ 3 ] = 0xCDEF0123L ;
+ pVideoMemory[ 4 ] = 0x55555555L ;
+ pVideoMemory[ 5 ] = 0x55555555L ;
+ pVideoMemory[ 6 ] = 0xAAAAAAAAL ;
+ pVideoMemory[ 7 ] = 0xAAAAAAAAL ;
+
+ if ( pVideoMemory[ 1 ] == 0x456789ABL )
+ {
+ if ( pVideoMemory[ 0 ] == 0x01234567L )
+ {
+ /* Channel A 64bit */
+ return ;
+ }
+ }
+ else
+ {
+ if ( pVideoMemory[ 0 ] == 0x01234567L )
+ {
+ /* Channel A 32bit */
+ XGINew_DataBusWidth = 32 ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x00 ) ;
+ return ;
+ }
+ }
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x03 ) ; /* Channel B, 64bit */
+ XGINew_DDR_MRS( pVBInfo);
+
+ XGINew_ChannelAB = 1 ;
+ XGINew_DataBusWidth = 64 ;
+ pVideoMemory[ 0 ] = 0x01234567L ;
+ pVideoMemory[ 1 ] = 0x456789ABL ;
+ pVideoMemory[ 2 ] = 0x89ABCDEFL ;
+ pVideoMemory[ 3 ] = 0xCDEF0123L ;
+ pVideoMemory[ 4 ] = 0x55555555L ;
+ pVideoMemory[ 5 ] = 0x55555555L ;
+ pVideoMemory[ 6 ] = 0xAAAAAAAAL ;
+ pVideoMemory[ 7 ] = 0xAAAAAAAAL ;
+
+ if ( pVideoMemory[ 1 ] == 0x456789ABL )
+ {
+ /* Channel B 64 */
+ if ( pVideoMemory[ 0 ] == 0x01234567L )
+ {
+ /* Channel B 64bit */
+ return ;
+ }
+ else
+ {
+ /* error */
+ }
+ }
+ else
+ {
+ if ( pVideoMemory[ 0 ] == 0x01234567L )
+ {
+ /* Channel B 32 */
+ XGINew_DataBusWidth = 32 ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x01 ) ;
+ }
+ else
+ {
+ /* error */
+ }
+ }
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetRank */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_SetRank( int index , UCHAR RankNo , UCHAR XGINew_ChannelAB , USHORT DRAMTYPE_TABLE[][ 5 ] , PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT data ;
+ int RankSize ;
+
+ if ( ( RankNo == 2 ) && ( DRAMTYPE_TABLE[ index ][ 0 ] == 2 ) )
+ return 0 ;
+
+ RankSize = DRAMTYPE_TABLE[ index ][ 3 ] / 2 * XGINew_DataBusWidth / 32 ;
+
+ if ( ( RankNo * RankSize ) <= 128 )
+ {
+ data = 0 ;
+
+ while( ( RankSize >>= 1 ) > 0 )
+ {
+ data += 0x10 ;
+ }
+ data |= ( RankNo - 1 ) << 2 ;
+ data |= ( XGINew_DataBusWidth / 64 ) & 2 ;
+ data |= XGINew_ChannelAB ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , data ) ;
+ /* should delay */
+ XGINew_SDR_MRS( pVBInfo ) ;
+ return( 1 ) ;
+ }
+ else
+ return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDDRChannel */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_SetDDRChannel( int index , UCHAR ChannelNo , UCHAR XGINew_ChannelAB , USHORT DRAMTYPE_TABLE[][ 5 ] , PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT data ;
+ int RankSize ;
+
+ RankSize = DRAMTYPE_TABLE[index][3]/2 * XGINew_DataBusWidth/32;
+ /* RankSize = DRAMTYPE_TABLE[ index ][ 3 ] ; */
+ if ( ChannelNo * RankSize <= 128 )
+ {
+ data = 0 ;
+ while( ( RankSize >>= 1 ) > 0 )
+ {
+ data += 0x10 ;
+ }
+
+ if ( ChannelNo == 2 )
+ data |= 0x0C ;
+
+ data |= ( XGINew_DataBusWidth / 32 ) & 2 ;
+ data |= XGINew_ChannelAB ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , data ) ;
+ /* should delay */
+ XGINew_DDR_MRS( pVBInfo ) ;
+ return( 1 ) ;
+ }
+ else
+ return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckColumn */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_CheckColumn( int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+ int i ;
+ ULONG Increment , Position ;
+
+ /* Increment = 1 << ( DRAMTYPE_TABLE[ index ][ 2 ] + XGINew_DataBusWidth / 64 + 1 ) ; */
+ Increment = 1 << ( 10 + XGINew_DataBusWidth / 64 ) ;
+
+ for( i = 0 , Position = 0 ; i < 2 ; i++ )
+ {
+ *( ( PULONG )( pVBInfo->FBAddr + Position ) ) = Position ;
+ Position += Increment ;
+ }
+
+#ifdef WIN2000 /* chiawen for linux solution */
+ DelayUS( 100 ) ;
+#endif
+
+ for( i = 0 , Position = 0 ; i < 2 ; i++ )
+ {
+ /* if ( pVBInfo->FBAddr[ Position ] != Position ) */
+ if ( ( *( PULONG )( pVBInfo->FBAddr + Position ) ) != Position )
+ return( 0 ) ;
+ Position += Increment ;
+ }
+ return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckBanks */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_CheckBanks( int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+ int i ;
+ ULONG Increment , Position ;
+
+ Increment = 1 << ( DRAMTYPE_TABLE[ index ][ 2 ] + XGINew_DataBusWidth / 64 + 2 ) ;
+
+ for( i = 0 , Position = 0 ; i < 4 ; i++ )
+ {
+ /* pVBInfo->FBAddr[ Position ] = Position ; */
+ *( ( PULONG )( pVBInfo->FBAddr + Position ) ) = Position ;
+ Position += Increment ;
+ }
+
+ for( i = 0 , Position = 0 ; i < 4 ; i++ )
+ {
+ /* if (pVBInfo->FBAddr[ Position ] != Position ) */
+ if ( ( *( PULONG )( pVBInfo->FBAddr + Position ) ) != Position )
+ return( 0 ) ;
+ Position += Increment ;
+ }
+ return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckRank */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_CheckRank( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+ int i ;
+ ULONG Increment , Position ;
+
+ Increment = 1 << ( DRAMTYPE_TABLE[ index ][ 2 ] + DRAMTYPE_TABLE[ index ][ 1 ] +
+ DRAMTYPE_TABLE[ index ][ 0 ] + XGINew_DataBusWidth / 64 + RankNo ) ;
+
+ for( i = 0 , Position = 0 ; i < 2 ; i++ )
+ {
+ /* pVBInfo->FBAddr[ Position ] = Position ; */
+ /* *( ( PULONG )( pVBInfo->FBAddr ) ) = Position ; */
+ *( ( PULONG )( pVBInfo->FBAddr + Position ) ) = Position ;
+ Position += Increment ;
+ }
+
+ for( i = 0 , Position = 0 ; i < 2 ; i++ )
+ {
+ /* if ( pVBInfo->FBAddr[ Position ] != Position ) */
+ /* if ( ( *( PULONG )( pVBInfo->FBAddr ) ) != Position ) */
+ if ( ( *( PULONG )( pVBInfo->FBAddr + Position ) ) != Position )
+ return( 0 ) ;
+ Position += Increment ;
+ }
+ return( 1 );
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckDDRRank */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_CheckDDRRank( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+ ULONG Increment , Position ;
+ USHORT data ;
+
+ Increment = 1 << ( DRAMTYPE_TABLE[ index ][ 2 ] + DRAMTYPE_TABLE[ index ][ 1 ] +
+ DRAMTYPE_TABLE[ index ][ 0 ] + XGINew_DataBusWidth / 64 + RankNo ) ;
+
+ Increment += Increment / 2 ;
+
+ Position = 0;
+ *( ( PULONG )( pVBInfo->FBAddr + Position + 0 ) ) = 0x01234567 ;
+ *( ( PULONG )( pVBInfo->FBAddr + Position + 1 ) ) = 0x456789AB ;
+ *( ( PULONG )( pVBInfo->FBAddr + Position + 2 ) ) = 0x55555555 ;
+ *( ( PULONG )( pVBInfo->FBAddr + Position + 3 ) ) = 0x55555555 ;
+ *( ( PULONG )( pVBInfo->FBAddr + Position + 4 ) ) = 0xAAAAAAAA ;
+ *( ( PULONG )( pVBInfo->FBAddr + Position + 5 ) ) = 0xAAAAAAAA ;
+
+ if ( ( *( PULONG )( pVBInfo->FBAddr + 1 ) ) == 0x456789AB )
+ return( 1 ) ;
+
+ if ( ( *( PULONG )( pVBInfo->FBAddr + 0 ) ) == 0x01234567 )
+ return( 0 ) ;
+
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) ;
+ data &= 0xF3 ;
+ data |= 0x0E ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , data ) ;
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x15 ) ;
+ data += 0x20 ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x15 , data ) ;
+
+ return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckRanks */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_CheckRanks( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+ int r ;
+
+ for( r = RankNo ; r >= 1 ; r-- )
+ {
+ if ( !XGINew_CheckRank( r , index , DRAMTYPE_TABLE, pVBInfo ) )
+ return( 0 ) ;
+ }
+
+ if ( !XGINew_CheckBanks( index , DRAMTYPE_TABLE, pVBInfo ) )
+ return( 0 ) ;
+
+ if ( !XGINew_CheckColumn( index , DRAMTYPE_TABLE, pVBInfo ) )
+ return( 0 ) ;
+
+ return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckDDRRanks */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_CheckDDRRanks( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+ int r ;
+
+ for( r = RankNo ; r >= 1 ; r-- )
+ {
+ if ( !XGINew_CheckDDRRank( r , index , DRAMTYPE_TABLE, pVBInfo ) )
+ return( 0 ) ;
+ }
+
+ if ( !XGINew_CheckBanks( index , DRAMTYPE_TABLE, pVBInfo ) )
+ return( 0 ) ;
+
+ if ( !XGINew_CheckColumn( index , DRAMTYPE_TABLE, pVBInfo ) )
+ return( 0 ) ;
+
+ return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_SDRSizing(PVB_DEVICE_INFO pVBInfo)
+{
+ int i ;
+ UCHAR j ;
+
+ for( i = 0 ; i < 13 ; i++ )
+ {
+ XGINew_SetDRAMSizingType( i , XGINew_SDRDRAM_TYPE , pVBInfo) ;
+
+ for( j = 2 ; j > 0 ; j-- )
+ {
+ if ( !XGINew_SetRank( i , ( UCHAR )j , XGINew_ChannelAB , XGINew_SDRDRAM_TYPE , pVBInfo) )
+ continue ;
+ else
+ {
+ if ( XGINew_CheckRanks( j , i , XGINew_SDRDRAM_TYPE, pVBInfo) )
+ return( 1 ) ;
+ }
+ }
+ }
+ return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMSizeReg */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGINew_SetDRAMSizeReg( int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT data = 0 , memsize = 0 ;
+ int RankSize ;
+ UCHAR ChannelNo ;
+
+ RankSize = DRAMTYPE_TABLE[ index ][ 3 ] * XGINew_DataBusWidth / 32 ;
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x13 ) ;
+ data &= 0x80 ;
+
+ if ( data == 0x80 )
+ RankSize *= 2 ;
+
+ data = 0 ;
+
+ if( XGINew_ChannelAB == 3 )
+ ChannelNo = 4 ;
+ else
+ ChannelNo = XGINew_ChannelAB ;
+
+ if ( ChannelNo * RankSize <= 256 )
+ {
+ while( ( RankSize >>= 1 ) > 0 )
+ {
+ data += 0x10 ;
+ }
+
+ memsize = data >> 4 ;
+
+ /* [2004/03/25] Vicent, Fix DRAM Sizing Error */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , ( XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) & 0x0F ) | ( data & 0xF0 ) ) ;
+
+ /* data |= XGINew_ChannelAB << 2 ; */
+ /* data |= ( XGINew_DataBusWidth / 64 ) << 1 ; */
+ /* XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , data ) ; */
+
+ /* should delay */
+ /* XGINew_SetDRAMModeRegister340( pVBInfo ) ; */
+ }
+ return( memsize ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMSize20Reg */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGINew_SetDRAMSize20Reg( int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT data = 0 , memsize = 0 ;
+ int RankSize ;
+ UCHAR ChannelNo ;
+
+ RankSize = DRAMTYPE_TABLE[ index ][ 3 ] * XGINew_DataBusWidth / 8 ;
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x13 ) ;
+ data &= 0x80 ;
+
+ if ( data == 0x80 )
+ RankSize *= 2 ;
+
+ data = 0 ;
+
+ if( XGINew_ChannelAB == 3 )
+ ChannelNo = 4 ;
+ else
+ ChannelNo = XGINew_ChannelAB ;
+
+ if ( ChannelNo * RankSize <= 256 )
+ {
+ while( ( RankSize >>= 1 ) > 0 )
+ {
+ data += 0x10 ;
+ }
+
+ memsize = data >> 4 ;
+
+ /* [2004/03/25] Vicent, Fix DRAM Sizing Error */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , ( XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) & 0x0F ) | ( data & 0xF0 ) ) ;
+ DelayUS( 15 ) ;
+
+ /* data |= XGINew_ChannelAB << 2 ; */
+ /* data |= ( XGINew_DataBusWidth / 64 ) << 1 ; */
+ /* XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , data ) ; */
+
+ /* should delay */
+ /* XGINew_SetDRAMModeRegister340( pVBInfo ) ; */
+ }
+ return( memsize ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_ReadWriteRest */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_ReadWriteRest( USHORT StopAddr , USHORT StartAddr, PVB_DEVICE_INFO pVBInfo)
+{
+ int i ;
+ ULONG Position = 0 ;
+
+ *( ( PULONG )( pVBInfo->FBAddr + Position ) ) = Position ;
+
+ for( i = StartAddr ; i <= StopAddr ; i++ )
+ {
+ Position = 1 << i ;
+ *( ( PULONG )( pVBInfo->FBAddr + Position ) ) = Position ;
+ }
+
+ DelayUS( 500 ) ; /* [Vicent] 2004/04/16. Fix #1759 Memory Size error in Multi-Adapter. */
+
+ Position = 0 ;
+
+ if ( ( *( PULONG )( pVBInfo->FBAddr + Position ) ) != Position )
+ return( 0 ) ;
+
+ for( i = StartAddr ; i <= StopAddr ; i++ )
+ {
+ Position = 1 << i ;
+ if ( ( *( PULONG )( pVBInfo->FBAddr + Position ) ) != Position )
+ return( 0 ) ;
+ }
+ return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckFrequence */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGINew_CheckFrequence( PVB_DEVICE_INFO pVBInfo )
+{
+ UCHAR data ;
+
+ data = XGINew_GetReg1( pVBInfo->P3d4 , 0x97 ) ;
+
+ if ( ( data & 0x10 ) == 0 )
+ {
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x39 ) ;
+ data = ( data & 0x02 ) >> 1 ;
+ return( data ) ;
+ }
+ else
+ return( data & 0x01 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckChannel */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_CheckChannel( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+ UCHAR data;
+
+ switch( HwDeviceExtension->jChipType )
+ {
+ case XG20:
+ case XG21:
+ data = XGINew_GetReg1( pVBInfo->P3d4 , 0x97 ) ;
+ data = data & 0x01;
+ XGINew_ChannelAB = 1 ; /* XG20 "JUST" one channel */
+
+ if ( data == 0 ) /* Single_32_16 */
+ {
+
+ if (( HwDeviceExtension->ulVideoMemorySize - 1 ) > 0x1000000)
+ {
+
+ XGINew_DataBusWidth = 32 ; /* 32 bits */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xB1 ) ; /* 22bit + 2 rank + 32bit */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x52 ) ;
+ DelayUS( 15 ) ;
+
+ if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+ return ;
+
+ if (( HwDeviceExtension->ulVideoMemorySize - 1 ) > 0x800000)
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x31 ) ; /* 22bit + 1 rank + 32bit */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x42 ) ;
+ DelayUS( 15 ) ;
+
+ if ( XGINew_ReadWriteRest( 23 , 23 , pVBInfo ) == 1 )
+ return ;
+ }
+ }
+
+ if (( HwDeviceExtension->ulVideoMemorySize - 1 ) > 0x800000)
+ {
+ XGINew_DataBusWidth = 16 ; /* 16 bits */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xB1 ) ; /* 22bit + 2 rank + 16bit */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x41 ) ;
+ DelayUS( 15 ) ;
+
+ if ( XGINew_ReadWriteRest( 23 , 22 , pVBInfo ) == 1 )
+ return ;
+ else
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x31 ) ;
+ DelayUS( 15 ) ;
+ }
+
+ }
+ else /* Dual_16_8 */
+ {
+ if (( HwDeviceExtension->ulVideoMemorySize - 1 ) > 0x800000)
+ {
+
+ XGINew_DataBusWidth = 16 ; /* 16 bits */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xB1 ) ; /* (0x31:12x8x2) 22bit + 2 rank */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x41 ) ; /* 0x41:16Mx16 bit*/
+ DelayUS( 15 ) ;
+
+ if ( XGINew_ReadWriteRest( 23 , 22 , pVBInfo ) == 1 )
+ return ;
+
+ if (( HwDeviceExtension->ulVideoMemorySize - 1 ) > 0x400000)
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x31 ) ; /* (0x31:12x8x2) 22bit + 1 rank */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x31 ) ; /* 0x31:8Mx16 bit*/
+ DelayUS( 15 ) ;
+
+ if ( XGINew_ReadWriteRest( 22 , 22 , pVBInfo ) == 1 )
+ return ;
+ }
+ }
+
+
+ if (( HwDeviceExtension->ulVideoMemorySize - 1 ) > 0x400000)
+ {
+ XGINew_DataBusWidth = 8 ; /* 8 bits */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xB1 ) ; /* (0x31:12x8x2) 22bit + 2 rank */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x30 ) ; /* 0x30:8Mx8 bit*/
+ DelayUS( 15 ) ;
+
+ if ( XGINew_ReadWriteRest( 22 , 21 , pVBInfo ) == 1 )
+ return ;
+ else
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x31 ) ; /* (0x31:12x8x2) 22bit + 1 rank */
+ DelayUS( 15 ) ;
+ }
+ }
+ break ;
+
+ case XG27:
+ XGINew_DataBusWidth = 16 ; /* 16 bits */
+ XGINew_ChannelAB = 1 ; /* Single channel */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x51 ) ; /* 32Mx16 bit*/
+ break ;
+ case XG41:
+ if ( XGINew_CheckFrequence(pVBInfo) == 1 )
+ {
+ XGINew_DataBusWidth = 32 ; /* 32 bits */
+ XGINew_ChannelAB = 3 ; /* Quad Channel */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x4C ) ;
+
+ if ( XGINew_ReadWriteRest( 25 , 23 , pVBInfo ) == 1 )
+ return ;
+
+ XGINew_ChannelAB = 2 ; /* Dual channels */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x48 ) ;
+
+ if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+ return ;
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x49 ) ;
+
+ if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+ return ;
+
+ XGINew_ChannelAB = 3 ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x3C ) ;
+
+ if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+ return ;
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x38 ) ;
+
+ if ( XGINew_ReadWriteRest( 8 , 4 , pVBInfo ) == 1 )
+ return ;
+ else
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x39 ) ;
+ }
+ else
+ { /* DDR */
+ XGINew_DataBusWidth = 64 ; /* 64 bits */
+ XGINew_ChannelAB = 2 ; /* Dual channels */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x5A ) ;
+
+ if ( XGINew_ReadWriteRest( 25 , 24 , pVBInfo ) == 1 )
+ return ;
+
+ XGINew_ChannelAB = 1 ; /* Single channels */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x52 ) ;
+
+ if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+ return ;
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x53 ) ;
+
+ if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+ return ;
+
+ XGINew_ChannelAB = 2 ; /* Dual channels */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x4A ) ;
+
+ if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+ return ;
+
+ XGINew_ChannelAB = 1 ; /* Single channels */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x42 ) ;
+
+ if ( XGINew_ReadWriteRest( 8 , 4 , pVBInfo ) == 1 )
+ return ;
+ else
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x43 ) ;
+ }
+
+ break ;
+
+ case XG42:
+/*
+ XG42 SR14 D[3] Reserve
+ D[2] = 1, Dual Channel
+ = 0, Single Channel
+
+ It's Different from Other XG40 Series.
+*/
+ if ( XGINew_CheckFrequence(pVBInfo) == 1 ) /* DDRII, DDR2x */
+ {
+ XGINew_DataBusWidth = 32 ; /* 32 bits */
+ XGINew_ChannelAB = 2 ; /* 2 Channel */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x44 ) ;
+
+ if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+ return ;
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x34 ) ;
+ if ( XGINew_ReadWriteRest( 23 , 22 , pVBInfo ) == 1 )
+ return ;
+
+ XGINew_ChannelAB = 1 ; /* Single Channel */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x40 ) ;
+
+ if ( XGINew_ReadWriteRest( 23 , 22 , pVBInfo ) == 1 )
+ return ;
+ else
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x30 ) ;
+ }
+ }
+ else
+ { /* DDR */
+ XGINew_DataBusWidth = 64 ; /* 64 bits */
+ XGINew_ChannelAB = 1 ; /* 1 channels */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x52 ) ;
+
+ if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+ return ;
+ else
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x42 ) ;
+ }
+ }
+
+ break ;
+
+ default: /* XG40 */
+
+ if ( XGINew_CheckFrequence(pVBInfo) == 1 ) /* DDRII */
+ {
+ XGINew_DataBusWidth = 32 ; /* 32 bits */
+ XGINew_ChannelAB = 3 ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x4C ) ;
+
+ if ( XGINew_ReadWriteRest( 25 , 23 , pVBInfo ) == 1 )
+ return ;
+
+ XGINew_ChannelAB = 2 ; /* 2 channels */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x48 ) ;
+
+ if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+ return ;
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x3C ) ;
+
+ if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+ XGINew_ChannelAB = 3 ; /* 4 channels */
+ else
+ {
+ XGINew_ChannelAB = 2 ; /* 2 channels */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x38 ) ;
+ }
+ }
+ else
+ { /* DDR */
+ XGINew_DataBusWidth = 64 ; /* 64 bits */
+ XGINew_ChannelAB = 2 ; /* 2 channels */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x5A ) ;
+
+ if ( XGINew_ReadWriteRest( 25 , 24 , pVBInfo ) == 1 )
+ return ;
+ else
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x4A ) ;
+ }
+ }
+ break ;
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDRSizing340 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_DDRSizing340( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+ int i ;
+ USHORT memsize , addr ;
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x15 , 0x00 ) ; /* noninterleaving */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x1C , 0x00 ) ; /* nontiling */
+ XGINew_CheckChannel( HwDeviceExtension, pVBInfo ) ;
+
+
+ if ( HwDeviceExtension->jChipType >= XG20 )
+ {
+ for( i = 0 ; i < 12 ; i++ )
+ {
+ XGINew_SetDRAMSizingType( i , XGINew_DDRDRAM_TYPE20, pVBInfo ) ;
+ memsize = XGINew_SetDRAMSize20Reg( i , XGINew_DDRDRAM_TYPE20, pVBInfo ) ;
+ if ( memsize == 0 )
+ continue ;
+
+ addr = memsize + ( XGINew_ChannelAB - 2 ) + 20 ;
+ if ( ( HwDeviceExtension->ulVideoMemorySize - 1 ) < ( ULONG )( 1 << addr ) )
+ continue ;
+
+ if ( XGINew_ReadWriteRest( addr , 5, pVBInfo ) == 1 )
+ return( 1 ) ;
+ }
+ }
+ else
+ {
+ for( i = 0 ; i < 4 ; i++ )
+ {
+ XGINew_SetDRAMSizingType( i , XGINew_DDRDRAM_TYPE340, pVBInfo ) ;
+ memsize = XGINew_SetDRAMSizeReg( i , XGINew_DDRDRAM_TYPE340, pVBInfo ) ;
+
+ if ( memsize == 0 )
+ continue ;
+
+ addr = memsize + ( XGINew_ChannelAB - 2 ) + 20 ;
+ if ( ( HwDeviceExtension->ulVideoMemorySize - 1 ) < ( ULONG )( 1 << addr ) )
+ continue ;
+
+ if ( XGINew_ReadWriteRest( addr , 9, pVBInfo ) == 1 )
+ return( 1 ) ;
+ }
+ }
+ return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDRSizing */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_DDRSizing(PVB_DEVICE_INFO pVBInfo)
+{
+ int i ;
+ UCHAR j ;
+
+ for( i = 0 ; i < 4 ; i++ )
+ {
+ XGINew_SetDRAMSizingType( i , XGINew_DDRDRAM_TYPE, pVBInfo ) ;
+ XGINew_DisableChannelInterleaving( i , XGINew_DDRDRAM_TYPE , pVBInfo) ;
+ for( j = 2 ; j > 0 ; j-- )
+ {
+ XGINew_SetDDRChannel( i , j , XGINew_ChannelAB , XGINew_DDRDRAM_TYPE , pVBInfo ) ;
+ if ( !XGINew_SetRank( i , ( UCHAR )j , XGINew_ChannelAB , XGINew_DDRDRAM_TYPE, pVBInfo ) )
+ continue ;
+ else
+ {
+ if ( XGINew_CheckDDRRanks( j , i , XGINew_DDRDRAM_TYPE, pVBInfo ) )
+ return( 1 ) ;
+ }
+ }
+ }
+ return( 0 ) ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetMemoryClock */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetMemoryClock( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x28 , pVBInfo->MCLKData[ XGINew_RAMType ].SR28 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x29 , pVBInfo->MCLKData[ XGINew_RAMType ].SR29 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2A , pVBInfo->MCLKData[ XGINew_RAMType ].SR2A ) ;
+
+
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , pVBInfo->ECLKData[ XGINew_RAMType ].SR2E ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2F , pVBInfo->ECLKData[ XGINew_RAMType ].SR2F ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x30 , pVBInfo->ECLKData[ XGINew_RAMType ].SR30 ) ;
+
+ /* [Vicent] 2004/07/07, When XG42 ECLK = MCLK = 207MHz, Set SR32 D[1:0] = 10b */
+ /* [Hsuan] 2004/08/20, Modify SR32 value, when MCLK=207MHZ, ELCK=250MHz, Set SR32 D[1:0] = 10b */
+ if ( HwDeviceExtension->jChipType == XG42 )
+ {
+ if ( ( pVBInfo->MCLKData[ XGINew_RAMType ].SR28 == 0x1C ) && ( pVBInfo->MCLKData[ XGINew_RAMType ].SR29 == 0x01 )
+ && ( ( ( pVBInfo->ECLKData[ XGINew_RAMType ].SR2E == 0x1C ) && ( pVBInfo->ECLKData[ XGINew_RAMType ].SR2F == 0x01 ) )
+ || ( ( pVBInfo->ECLKData[ XGINew_RAMType ].SR2E == 0x22 ) && ( pVBInfo->ECLKData[ XGINew_RAMType ].SR2F == 0x01 ) ) ) )
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x32 , ( ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x32 ) & 0xFC ) | 0x02 ) ;
+ }
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : ChkLFB */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN ChkLFB( PVB_DEVICE_INFO pVBInfo )
+{
+ if ( LFBDRAMTrap & XGINew_GetReg1( pVBInfo->P3d4 , 0x78 ) )
+ return( TRUE ) ;
+ else
+ return( FALSE );
+}
+
+
+/* --------------------------------------------------------------------- */
+/* input : dx ,valid value : CR or second chip's CR */
+/* */
+/* SetPowerConsume : */
+/* Description: reduce 40/43 power consumption in first chip or */
+/* in second chip, assume CR A1 D[6]="1" in this case */
+/* output : none */
+/* --------------------------------------------------------------------- */
+void SetPowerConsume ( PXGI_HW_DEVICE_INFO HwDeviceExtension , ULONG XGI_P3d4Port )
+{
+ ULONG lTemp ;
+ UCHAR bTemp;
+
+ HwDeviceExtension->pQueryVGAConfigSpace( HwDeviceExtension , 0x08 , 0 , &lTemp ) ; /* Get */
+ if ((lTemp&0xFF)==0)
+ {
+ /* set CR58 D[5]=0 D[3]=0 */
+ XGINew_SetRegAND( XGI_P3d4Port , 0x58 , 0xD7 ) ;
+ bTemp = (UCHAR) XGINew_GetReg1( XGI_P3d4Port , 0xCB ) ;
+ if (bTemp&0x20)
+ {
+ if (!(bTemp&0x10))
+ {
+ XGINew_SetRegANDOR( XGI_P3d4Port , 0x58 , 0xD7 , 0x20 ) ; /* CR58 D[5]=1 D[3]=0 */
+ }
+ else
+ {
+ XGINew_SetRegANDOR( XGI_P3d4Port , 0x58 , 0xD7 , 0x08 ) ; /* CR58 D[5]=0 D[3]=1 */
+ }
+
+ }
+
+ }
+}
+
+
+
+#if defined(LINUX_XF86)||defined(LINUX_KERNEL)
+void XGINew_InitVBIOSData(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+
+ /* ULONG ROMAddr = (ULONG)HwDeviceExtension->pjVirtualRomBase; */
+ pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+ pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+ pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+ pVBInfo->ISXPDOS = 0 ;
+
+ pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+ pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+ pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+ pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+ pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+ pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+ pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+ pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+ pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+ pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+ pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+ pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+ pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+ pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+ pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+ pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+ pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+ if ( HwDeviceExtension->jChipType < XG20 ) /* kuku 2004/06/25 */
+ XGI_GetVBType( pVBInfo ) ; /* Run XGI_GetVBType before InitTo330Pointer */
+
+ switch(HwDeviceExtension->jChipType)
+ {
+ case XG40:
+ case XG41:
+ case XG42:
+ case XG20:
+ case XG21:
+ default:
+ InitTo330Pointer(HwDeviceExtension->jChipType,pVBInfo);
+ return ;
+ }
+
+}
+#endif /* For Linux */
+
+/* --------------------------------------------------------------------- */
+/* Function : ReadVBIOSTablData */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void ReadVBIOSTablData( UCHAR ChipType , PVB_DEVICE_INFO pVBInfo)
+{
+ PUCHAR volatile pVideoMemory = ( PUCHAR )pVBInfo->ROMAddr ;
+ ULONG i ;
+ UCHAR j , k ;
+#if 0
+ ULONG ii , jj ;
+ i = pVideoMemory[ 0x1CF ] | ( pVideoMemory[ 0x1D0 ] << 8 ) ; /* UniROM */
+ if ( i != 0 )
+ UNIROM = 1 ;
+
+ ii = 0x90 ;
+ for( jj = 0x00 ; jj < 0x08 ; jj++ )
+ {
+ pVBInfo->MCLKData[ jj ].SR28 = pVideoMemory[ ii ] ;
+ pVBInfo->MCLKData[ jj ].SR29 = pVideoMemory[ ii + 1] ;
+ pVBInfo->MCLKData[ jj ].SR2A = pVideoMemory[ ii + 2] ;
+ pVBInfo->MCLKData[ jj ].CLOCK = pVideoMemory[ ii + 3 ] | ( pVideoMemory[ ii + 4 ] << 8 ) ;
+ ii += 0x05 ;
+ }
+
+ ii = 0xB8 ;
+ for( jj = 0x00 ; jj < 0x08 ; jj++ )
+ {
+ pVBInfo->ECLKData[ jj ].SR2E = pVideoMemory[ ii ] ;
+ pVBInfo->ECLKData[ jj ].SR2F=pVideoMemory[ ii + 1 ] ;
+ pVBInfo->ECLKData[ jj ].SR30= pVideoMemory[ ii + 2 ] ;
+ pVBInfo->ECLKData[ jj ].CLOCK= pVideoMemory[ ii + 3 ] | ( pVideoMemory[ ii + 4 ] << 8 ) ;
+ ii += 0x05 ;
+ }
+
+ /* Volari customize data area start */
+ /* if ( ChipType == XG40 ) */
+ if ( ChipType >= XG40 )
+ {
+ ii = 0xE0 ;
+ for( jj = 0x00 ; jj < 0x03 ; jj++ )
+ {
+ pVBInfo->SR15[ jj ][ 0 ] = pVideoMemory[ ii ] ; /* SR13, SR14, and SR18 */
+ pVBInfo->SR15[ jj ][ 1 ] = pVideoMemory[ ii + 1 ] ;
+ pVBInfo->SR15[ jj ][ 2 ] = pVideoMemory[ ii + 2 ] ;
+ pVBInfo->SR15[ jj ][ 3 ] = pVideoMemory[ ii + 3 ] ;
+ pVBInfo->SR15[ jj ][ 4 ] = pVideoMemory[ ii + 4 ] ;
+ pVBInfo->SR15[ jj ][ 5 ] = pVideoMemory[ ii + 5 ] ;
+ pVBInfo->SR15[ jj ][ 6 ] = pVideoMemory[ ii + 6 ] ;
+ pVBInfo->SR15[ jj ][ 7 ] = pVideoMemory[ ii + 7 ] ;
+ ii += 0x08 ;
+ }
+ ii = 0x110 ;
+ jj = 0x03 ;
+ pVBInfo->SR15[ jj ][ 0 ] = pVideoMemory[ ii ] ; /* SR1B */
+ pVBInfo->SR15[ jj ][ 1 ] = pVideoMemory[ ii + 1 ] ;
+ pVBInfo->SR15[ jj ][ 2 ] = pVideoMemory[ ii + 2 ] ;
+ pVBInfo->SR15[ jj ][ 3 ] = pVideoMemory[ ii + 3 ] ;
+ pVBInfo->SR15[ jj ][ 4 ] = pVideoMemory[ ii + 4 ] ;
+ pVBInfo->SR15[ jj ][ 5 ] = pVideoMemory[ ii + 5 ] ;
+ pVBInfo->SR15[ jj ][ 6 ] = pVideoMemory[ ii + 6 ] ;
+ pVBInfo->SR15[ jj ][ 7 ] = pVideoMemory[ ii + 7 ] ;
+
+ *pVBInfo->pSR07 = pVideoMemory[ 0x74 ] ;
+ *pVBInfo->pSR1F = pVideoMemory[ 0x75 ] ;
+ *pVBInfo->pSR21 = pVideoMemory[ 0x76 ] ;
+ *pVBInfo->pSR22 = pVideoMemory[ 0x77 ] ;
+ *pVBInfo->pSR23 = pVideoMemory[ 0x78 ] ;
+ *pVBInfo->pSR24 = pVideoMemory[ 0x79 ] ;
+ pVBInfo->SR25[ 0 ] = pVideoMemory[ 0x7A ] ;
+ *pVBInfo->pSR31 = pVideoMemory[ 0x7B ] ;
+ *pVBInfo->pSR32 = pVideoMemory[ 0x7C ] ;
+ *pVBInfo->pSR33 = pVideoMemory[ 0x7D ] ;
+ ii = 0xF8 ;
+
+ for( jj = 0 ; jj < 3 ; jj++ )
+ {
+ pVBInfo->CR40[ jj ][ 0 ] = pVideoMemory[ ii ] ;
+ pVBInfo->CR40[ jj ][ 1 ] = pVideoMemory[ ii + 1 ] ;
+ pVBInfo->CR40[ jj ][ 2 ] = pVideoMemory[ ii + 2 ] ;
+ pVBInfo->CR40[ jj ][ 3 ] = pVideoMemory[ ii + 3 ] ;
+ pVBInfo->CR40[ jj ][ 4 ] = pVideoMemory[ ii + 4 ] ;
+ pVBInfo->CR40[ jj ][ 5 ] = pVideoMemory[ ii + 5 ] ;
+ pVBInfo->CR40[ jj ][ 6 ] = pVideoMemory[ ii + 6 ] ;
+ pVBInfo->CR40[ jj ][ 7 ] = pVideoMemory[ ii + 7 ] ;
+ ii += 0x08 ;
+ }
+
+ ii = 0x118 ;
+ for( j = 3 ; j < 24 ; j++ )
+ {
+ pVBInfo->CR40[ j ][ 0 ] = pVideoMemory[ ii ] ;
+ pVBInfo->CR40[ j ][ 1 ] = pVideoMemory[ ii + 1 ] ;
+ pVBInfo->CR40[ j ][ 2 ] = pVideoMemory[ ii + 2 ] ;
+ pVBInfo->CR40[ j ][ 3 ] = pVideoMemory[ ii + 3 ] ;
+ pVBInfo->CR40[ j ][ 4 ] = pVideoMemory[ ii + 4 ] ;
+ pVBInfo->CR40[ j ][ 5 ] = pVideoMemory[ ii + 5 ] ;
+ pVBInfo->CR40[ j ][ 6 ] = pVideoMemory[ ii + 6 ] ;
+ pVBInfo->CR40[ j ][ 7 ] = pVideoMemory[ ii + 7 ] ;
+ ii += 0x08 ;
+ }
+
+ i = pVideoMemory[ 0x1C0 ] | ( pVideoMemory[ 0x1C1 ] << 8 ) ;
+
+ for( j = 0 ; j < 8 ; j++ )
+ {
+ for( k = 0 ; k < 4 ; k++ )
+ pVBInfo->CR6B[ j ][ k ] = pVideoMemory[ i + 4 * j + k ] ;
+ }
+
+ i = pVideoMemory[ 0x1C2 ] | ( pVideoMemory[ 0x1C3 ] << 8 ) ;
+
+ for( j = 0 ; j < 8 ; j++ )
+ {
+ for( k = 0 ; k < 4 ; k++ )
+ pVBInfo->CR6E[ j ][ k ] = pVideoMemory[ i + 4 * j + k ] ;
+ }
+
+ i = pVideoMemory[ 0x1C4 ] | ( pVideoMemory[ 0x1C5 ] << 8 ) ;
+ for( j = 0 ; j < 8 ; j++ )
+ {
+ for( k = 0 ; k < 32 ; k++ )
+ pVBInfo->CR6F[ j ][ k ] = pVideoMemory[ i + 32 * j + k ] ;
+ }
+
+ i = pVideoMemory[ 0x1C6 ] | ( pVideoMemory[ 0x1C7 ] << 8 ) ;
+
+ for( j = 0 ; j < 8 ; j++ )
+ {
+ for( k = 0 ; k < 2 ; k++ )
+ pVBInfo->CR89[ j ][ k ] = pVideoMemory[ i + 2 * j + k ] ;
+ }
+
+ i = pVideoMemory[ 0x1C8 ] | ( pVideoMemory[ 0x1C9 ] << 8 ) ;
+ for( j = 0 ; j < 12 ; j++ )
+ pVBInfo->AGPReg[ j ] = pVideoMemory[ i + j ] ;
+
+ i = pVideoMemory[ 0x1CF ] | ( pVideoMemory[ 0x1D0 ] << 8 ) ;
+ for( j = 0 ; j < 4 ; j++ )
+ pVBInfo->SR16[ j ] = pVideoMemory[ i + j ] ;
+
+ if ( ChipType == XG21 )
+ {
+ if (pVideoMemory[ 0x67 ] & 0x80)
+ {
+ *pVBInfo->pDVOSetting = pVideoMemory[ 0x67 ];
+ }
+ if ( (pVideoMemory[ 0x67 ] & 0xC0) == 0xC0 )
+ {
+ *pVBInfo->pCR2E = pVideoMemory[ i + 4 ] ;
+ *pVBInfo->pCR2F = pVideoMemory[ i + 5 ] ;
+ *pVBInfo->pCR46 = pVideoMemory[ i + 6 ] ;
+ *pVBInfo->pCR47 = pVideoMemory[ i + 7 ] ;
+ }
+ }
+
+ if ( ChipType == XG27 )
+ {
+ jj = i+j;
+ for( i = 0 ; i <= 0xB ; i++,jj++ )
+ pVBInfo->pCRD0[i] = pVideoMemory[ jj ] ;
+ for( i = 0x0 ; i <= 0x1 ; i++,jj++ )
+ pVBInfo->pCRDE[i] = pVideoMemory[ jj ] ;
+
+ *pVBInfo->pSR40 = pVideoMemory[ jj ] ;
+ jj++;
+ *pVBInfo->pSR41 = pVideoMemory[ jj ] ;
+
+ if (pVideoMemory[ 0x67 ] & 0x80)
+ {
+ *pVBInfo->pDVOSetting = pVideoMemory[ 0x67 ];
+ }
+ if ( (pVideoMemory[ 0x67 ] & 0xC0) == 0xC0 )
+ {
+ jj++;
+ *pVBInfo->pCR2E = pVideoMemory[ jj ] ;
+ *pVBInfo->pCR2F = pVideoMemory[ jj + 1 ] ;
+ *pVBInfo->pCR46 = pVideoMemory[ jj + 2 ] ;
+ *pVBInfo->pCR47 = pVideoMemory[ jj + 3 ] ;
+ }
+
+ }
+
+ *pVBInfo->pCRCF = pVideoMemory[ 0x1CA ] ;
+ *pVBInfo->pXGINew_DRAMTypeDefinition = pVideoMemory[ 0x1CB ] ;
+ *pVBInfo->pXGINew_I2CDefinition = pVideoMemory[ 0x1D1 ] ;
+ if ( ChipType >= XG20 )
+ {
+ *pVBInfo->pXGINew_CR97 = pVideoMemory[ 0x1D2 ] ;
+ if ( ChipType == XG27 )
+ {
+ *pVBInfo->pSR36 = pVideoMemory[ 0x1D3 ] ;
+ *pVBInfo->pCR8F = pVideoMemory[ 0x1D5 ] ;
+ }
+ }
+
+ }
+#endif
+ /* Volari customize data area end */
+
+ if ( ChipType == XG21 )
+ {
+ pVBInfo->IF_DEF_LVDS = 0 ;
+ if (pVideoMemory[ 0x65 ] & 0x1)
+ {
+ pVBInfo->IF_DEF_LVDS = 1 ;
+ i = pVideoMemory[ 0x316 ] | ( pVideoMemory[ 0x317 ] << 8 );
+ j = pVideoMemory[ i-1 ] ;
+ if ( j != 0xff )
+ {
+ k = 0;
+ do
+ {
+ pVBInfo->XG21_LVDSCapList[k].LVDS_Capability = pVideoMemory[ i ] | ( pVideoMemory[ i + 1 ] << 8 );
+ pVBInfo->XG21_LVDSCapList[k].LVDSHT = pVideoMemory[ i + 2 ] | ( pVideoMemory[ i + 3 ] << 8 ) ;
+ pVBInfo->XG21_LVDSCapList[k].LVDSVT = pVideoMemory[ i + 4 ] | ( pVideoMemory[ i + 5 ] << 8 );
+ pVBInfo->XG21_LVDSCapList[k].LVDSHDE = pVideoMemory[ i + 6 ] | ( pVideoMemory[ i + 7 ] << 8 );
+ pVBInfo->XG21_LVDSCapList[k].LVDSVDE = pVideoMemory[ i + 8 ] | ( pVideoMemory[ i + 9 ] << 8 );
+ pVBInfo->XG21_LVDSCapList[k].LVDSHFP = pVideoMemory[ i + 10 ] | ( pVideoMemory[ i + 11 ] << 8 );
+ pVBInfo->XG21_LVDSCapList[k].LVDSVFP = pVideoMemory[ i + 12 ] | ( pVideoMemory[ i + 13 ] << 8 );
+ pVBInfo->XG21_LVDSCapList[k].LVDSHSYNC = pVideoMemory[ i + 14 ] | ( pVideoMemory[ i + 15 ] << 8 );
+ pVBInfo->XG21_LVDSCapList[k].LVDSVSYNC = pVideoMemory[ i + 16 ] | ( pVideoMemory[ i + 17 ] << 8 );
+ pVBInfo->XG21_LVDSCapList[k].VCLKData1 = pVideoMemory[ i + 18 ] ;
+ pVBInfo->XG21_LVDSCapList[k].VCLKData2 = pVideoMemory[ i + 19 ] ;
+ pVBInfo->XG21_LVDSCapList[k].PSC_S1 = pVideoMemory[ i + 20 ] ;
+ pVBInfo->XG21_LVDSCapList[k].PSC_S2 = pVideoMemory[ i + 21 ] ;
+ pVBInfo->XG21_LVDSCapList[k].PSC_S3 = pVideoMemory[ i + 22 ] ;
+ pVBInfo->XG21_LVDSCapList[k].PSC_S4 = pVideoMemory[ i + 23 ] ;
+ pVBInfo->XG21_LVDSCapList[k].PSC_S5 = pVideoMemory[ i + 24 ] ;
+ i += 25;
+ j--;
+ k++;
+ } while ( (j>0) && ( k < (sizeof(XGI21_LCDCapList)/sizeof(XGI21_LVDSCapStruct)) ) );
+ }
+ else
+ {
+ pVBInfo->XG21_LVDSCapList[0].LVDS_Capability = pVideoMemory[ i ] | ( pVideoMemory[ i + 1 ] << 8 );
+ pVBInfo->XG21_LVDSCapList[0].LVDSHT = pVideoMemory[ i + 2 ] | ( pVideoMemory[ i + 3 ] << 8 ) ;
+ pVBInfo->XG21_LVDSCapList[0].LVDSVT = pVideoMemory[ i + 4 ] | ( pVideoMemory[ i + 5 ] << 8 );
+ pVBInfo->XG21_LVDSCapList[0].LVDSHDE = pVideoMemory[ i + 6 ] | ( pVideoMemory[ i + 7 ] << 8 );
+ pVBInfo->XG21_LVDSCapList[0].LVDSVDE = pVideoMemory[ i + 8 ] | ( pVideoMemory[ i + 9 ] << 8 );
+ pVBInfo->XG21_LVDSCapList[0].LVDSHFP = pVideoMemory[ i + 10 ] | ( pVideoMemory[ i + 11 ] << 8 );
+ pVBInfo->XG21_LVDSCapList[0].LVDSVFP = pVideoMemory[ i + 12 ] | ( pVideoMemory[ i + 13 ] << 8 );
+ pVBInfo->XG21_LVDSCapList[0].LVDSHSYNC = pVideoMemory[ i + 14 ] | ( pVideoMemory[ i + 15 ] << 8 );
+ pVBInfo->XG21_LVDSCapList[0].LVDSVSYNC = pVideoMemory[ i + 16 ] | ( pVideoMemory[ i + 17 ] << 8 );
+ pVBInfo->XG21_LVDSCapList[0].VCLKData1 = pVideoMemory[ i + 18 ] ;
+ pVBInfo->XG21_LVDSCapList[0].VCLKData2 = pVideoMemory[ i + 19 ] ;
+ pVBInfo->XG21_LVDSCapList[0].PSC_S1 = pVideoMemory[ i + 20 ] ;
+ pVBInfo->XG21_LVDSCapList[0].PSC_S2 = pVideoMemory[ i + 21 ] ;
+ pVBInfo->XG21_LVDSCapList[0].PSC_S3 = pVideoMemory[ i + 22 ] ;
+ pVBInfo->XG21_LVDSCapList[0].PSC_S4 = pVideoMemory[ i + 23 ] ;
+ pVBInfo->XG21_LVDSCapList[0].PSC_S5 = pVideoMemory[ i + 24 ] ;
+ }
+ }
+ }
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR1x_MRS_XG20 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR1x_MRS_XG20( ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+{
+
+ XGINew_SetReg1( P3c4 , 0x18 , 0x01 ) ;
+ XGINew_SetReg1( P3c4 , 0x19 , 0x40 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+ DelayUS( 60 ) ;
+
+ XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;
+ XGINew_SetReg1( P3c4 , 0x19 , 0x40 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+ DelayUS( 60 ) ;
+ XGINew_SetReg1( P3c4 , 0x18 , pVBInfo->SR15[ 2 ][ XGINew_RAMType ] ) ; /* SR18 */
+ /* XGINew_SetReg1( P3c4 , 0x18 , 0x31 ) ; */
+ XGINew_SetReg1( P3c4 , 0x19 , 0x01 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x03 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x83 ) ;
+ DelayUS( 1000 ) ;
+ XGINew_SetReg1( P3c4 , 0x1B , 0x03 ) ;
+ DelayUS( 500 ) ;
+ /* XGINew_SetReg1( P3c4 , 0x18 , 0x31 ) ; */
+ XGINew_SetReg1( P3c4 , 0x18 , pVBInfo->SR15[ 2 ][ XGINew_RAMType ] ) ; /* SR18 */
+ XGINew_SetReg1( P3c4 , 0x19 , 0x00 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x03 ) ;
+ XGINew_SetReg1( P3c4 , 0x16 , 0x83 ) ;
+ XGINew_SetReg1( P3c4 , 0x1B , 0x00 ) ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMModeRegister_XG20 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetDRAMModeRegister_XG20( PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+ VB_DEVICE_INFO VBINF;
+ PVB_DEVICE_INFO pVBInfo = &VBINF;
+ pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+ pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+ pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+ pVBInfo->ISXPDOS = 0 ;
+
+ pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+ pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+ pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+ pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+ pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+ pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+ pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+ pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+ pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+ pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+ pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+ pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+ pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+ pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+ pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+ pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+ pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+
+ InitTo330Pointer(HwDeviceExtension->jChipType,pVBInfo);
+
+ ReadVBIOSTablData( HwDeviceExtension->jChipType , pVBInfo) ;
+
+ if ( XGINew_GetXG20DRAMType( HwDeviceExtension, pVBInfo) == 0 )
+ XGINew_DDR1x_MRS_XG20( pVBInfo->P3c4, pVBInfo ) ;
+ else
+ XGINew_DDR2_MRS_XG20( HwDeviceExtension , pVBInfo->P3c4 , pVBInfo ) ;
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , 0x03 ) ;
+}
+
+void XGINew_SetDRAMModeRegister_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+ VB_DEVICE_INFO VBINF;
+ PVB_DEVICE_INFO pVBInfo = &VBINF;
+ pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+ pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+ pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+ pVBInfo->ISXPDOS = 0 ;
+
+ pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+ pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+ pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+ pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+ pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+ pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+ pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+ pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+ pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+ pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+ pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+ pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+ pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+ pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+ pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+ pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+ pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+
+ InitTo330Pointer(HwDeviceExtension->jChipType,pVBInfo);
+
+ ReadVBIOSTablData( HwDeviceExtension->jChipType , pVBInfo) ;
+
+ if ( XGINew_GetXG20DRAMType( HwDeviceExtension, pVBInfo) == 0 )
+ XGINew_DDR1x_MRS_XG20( pVBInfo->P3c4, pVBInfo ) ;
+ else
+ //XGINew_DDR2_MRS_XG27( HwDeviceExtension , pVBInfo->P3c4 , pVBInfo ) ;
+ XGINew_DDRII_Bootup_XG27( HwDeviceExtension , pVBInfo->P3c4 , pVBInfo) ;
+
+ //XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , 0x03 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , pVBInfo->SR15[ 3 ][ XGINew_RAMType ] ) ; /* SR1B */
+
+}
+/*
+void XGINew_SetDRAMModeRegister_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+#ifndef LINUX_XF86
+ UCHAR data ;
+#endif
+ VB_DEVICE_INFO VBINF;
+ PVB_DEVICE_INFO pVBInfo = &VBINF;
+ pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+ pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+ pVBInfo->BaseAddr = HwDeviceExtension->pjIOAddress ;
+ pVBInfo->ISXPDOS = 0 ;
+
+ pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+ pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+ pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+ pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+ pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+ pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+ pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+ pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+ pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+ pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+ pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+ pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+ pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+ pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+ pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+ pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+ pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+
+ InitTo330Pointer(HwDeviceExtension->jChipType,pVBInfo);
+
+ ReadVBIOSTablData( HwDeviceExtension->jChipType , pVBInfo) ;
+
+ if ( XGINew_GetXG20DRAMType( HwDeviceExtension, pVBInfo) == 0 )
+ XGINew_DDR1x_MRS_XG20( pVBInfo->P3c4, pVBInfo ) ;
+ else
+ XGINew_DDR2_MRS_XG27( HwDeviceExtension , pVBInfo->P3c4 , pVBInfo ) ;
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , 0x03 ) ;
+}
+*/
+/* -------------------------------------------------------- */
+/* Function : XGINew_ChkSenseStatus */
+/* Input : */
+/* Output : */
+/* Description : */
+/* -------------------------------------------------------- */
+void XGINew_ChkSenseStatus ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT tempbx=0 , temp , tempcx , CR3CData;
+
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x32 ) ;
+
+ if ( temp & Monitor1Sense )
+ tempbx |= ActiveCRT1 ;
+ if ( temp & LCDSense )
+ tempbx |= ActiveLCD ;
+ if ( temp & Monitor2Sense )
+ tempbx |= ActiveCRT2 ;
+ if ( temp & TVSense )
+ {
+ tempbx |= ActiveTV ;
+ if ( temp & AVIDEOSense )
+ tempbx |= ( ActiveAVideo << 8 );
+ if ( temp & SVIDEOSense )
+ tempbx |= ( ActiveSVideo << 8 );
+ if ( temp & SCARTSense )
+ tempbx |= ( ActiveSCART << 8 );
+ if ( temp & HiTVSense )
+ tempbx |= ( ActiveHiTV << 8 );
+ if ( temp & YPbPrSense )
+ tempbx |= ( ActiveYPbPr << 8 );
+ }
+
+ tempcx = XGINew_GetReg1( pVBInfo->P3d4 , 0x3d ) ;
+ tempcx |= ( XGINew_GetReg1( pVBInfo->P3d4 , 0x3e ) << 8 ) ;
+
+ if ( tempbx & tempcx )
+ {
+ CR3CData = XGINew_GetReg1( pVBInfo->P3d4 , 0x3c ) ;
+ if ( !( CR3CData & DisplayDeviceFromCMOS ) )
+ {
+ tempcx = 0x1FF0 ;
+ if ( *pVBInfo->pSoftSetting & ModeSoftSetting )
+ {
+ tempbx = 0x1FF0 ;
+ }
+ }
+ }
+ else
+ {
+ tempcx = 0x1FF0 ;
+ if ( *pVBInfo->pSoftSetting & ModeSoftSetting )
+ {
+ tempbx = 0x1FF0 ;
+ }
+ }
+
+ tempbx &= tempcx ;
+ XGINew_SetReg1( pVBInfo->P3d4, 0x3d , ( tempbx & 0x00FF ) ) ;
+ XGINew_SetReg1( pVBInfo->P3d4, 0x3e , ( ( tempbx & 0xFF00 ) >> 8 )) ;
+}
+/* -------------------------------------------------------- */
+/* Function : XGINew_SetModeScratch */
+/* Input : */
+/* Output : */
+/* Description : */
+/* -------------------------------------------------------- */
+void XGINew_SetModeScratch ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT temp , tempcl = 0 , tempch = 0 , CR31Data , CR38Data;
+
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x3d ) ;
+ temp |= XGINew_GetReg1( pVBInfo->P3d4 , 0x3e ) << 8 ;
+ temp |= ( XGINew_GetReg1( pVBInfo->P3d4 , 0x31 ) & ( DriverMode >> 8) ) << 8 ;
+
+ if ( pVBInfo->IF_DEF_CRT2Monitor == 1)
+ {
+ if ( temp & ActiveCRT2 )
+ tempcl = SetCRT2ToRAMDAC ;
+ }
+
+ if ( temp & ActiveLCD )
+ {
+ tempcl |= SetCRT2ToLCD ;
+ if ( temp & DriverMode )
+ {
+ if ( temp & ActiveTV )
+ {
+ tempch = SetToLCDA | EnableDualEdge ;
+ temp ^= SetCRT2ToLCD ;
+
+ if ( ( temp >> 8 ) & ActiveAVideo )
+ tempcl |= SetCRT2ToAVIDEO ;
+ if ( ( temp >> 8 ) & ActiveSVideo )
+ tempcl |= SetCRT2ToSVIDEO ;
+ if ( ( temp >> 8 ) & ActiveSCART )
+ tempcl |= SetCRT2ToSCART ;
+
+ if ( pVBInfo->IF_DEF_HiVision == 1 )
+ {
+ if ( ( temp >> 8 ) & ActiveHiTV )
+ tempcl |= SetCRT2ToHiVisionTV ;
+ }
+
+ if ( pVBInfo->IF_DEF_YPbPr == 1 )
+ {
+ if ( ( temp >> 8 ) & ActiveYPbPr )
+ tempch |= SetYPbPr ;
+ }
+ }
+ }
+ }
+ else
+ {
+ if ( ( temp >> 8 ) & ActiveAVideo )
+ tempcl |= SetCRT2ToAVIDEO ;
+ if ( ( temp >> 8 ) & ActiveSVideo )
+ tempcl |= SetCRT2ToSVIDEO ;
+ if ( ( temp >> 8 ) & ActiveSCART )
+ tempcl |= SetCRT2ToSCART ;
+
+ if ( pVBInfo->IF_DEF_HiVision == 1 )
+ {
+ if ( ( temp >> 8 ) & ActiveHiTV )
+ tempcl |= SetCRT2ToHiVisionTV ;
+ }
+
+ if ( pVBInfo->IF_DEF_YPbPr == 1 )
+ {
+ if ( ( temp >> 8 ) & ActiveYPbPr )
+ tempch |= SetYPbPr ;
+ }
+ }
+
+
+ tempcl |= SetSimuScanMode ;
+ if ( (!( temp & ActiveCRT1 )) && ( ( temp & ActiveLCD ) || ( temp & ActiveTV ) || ( temp & ActiveCRT2 ) ) )
+ tempcl ^= ( SetSimuScanMode | SwitchToCRT2 ) ;
+ if ( ( temp & ActiveLCD ) && ( temp & ActiveTV ) )
+ tempcl ^= ( SetSimuScanMode | SwitchToCRT2 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4, 0x30 , tempcl ) ;
+
+ CR31Data = XGINew_GetReg1( pVBInfo->P3d4 , 0x31 ) ;
+ CR31Data &= ~( SetNotSimuMode >> 8 ) ;
+ if ( !( temp & ActiveCRT1 ) )
+ CR31Data |= ( SetNotSimuMode >> 8 ) ;
+ CR31Data &= ~( DisableCRT2Display >> 8 ) ;
+ if (!( ( temp & ActiveLCD ) || ( temp & ActiveTV ) || ( temp & ActiveCRT2 ) ) )
+ CR31Data |= ( DisableCRT2Display >> 8 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4, 0x31 , CR31Data ) ;
+
+ CR38Data = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+ CR38Data &= ~SetYPbPr ;
+ CR38Data |= tempch ;
+ XGINew_SetReg1( pVBInfo->P3d4, 0x38 , CR38Data ) ;
+
+}
+
+/* -------------------------------------------------------- */
+/* Function : XGINew_GetXG21Sense */
+/* Input : */
+/* Output : */
+/* Description : */
+/* -------------------------------------------------------- */
+void XGINew_GetXG21Sense(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+ UCHAR Temp;
+ PUCHAR volatile pVideoMemory = ( PUCHAR )pVBInfo->ROMAddr ;
+
+ pVBInfo->IF_DEF_LVDS = 0 ;
+
+#ifdef WIN2000
+ pVBInfo->IF_DEF_CH7007 = 0 ;
+ if ( ( pVideoMemory[ 0x65 ] & 0x02 ) ) /* For XG21 CH7007 */
+ {
+ /* VideoDebugPrint((0, "ReadVBIOSTablData: pVideoMemory[ 0x65 ] =%x\n",pVideoMemory[ 0x65 ])); */
+ pVBInfo->IF_DEF_CH7007 = 1 ; /* [Billy] 07/05/03 */
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x38 , ~0xE0 , 0x60 ) ; /* CH7007 on chip */
+ }
+ else
+#endif
+#if 1
+ if (( pVideoMemory[ 0x65 ] & 0x01 ) ) /* For XG21 LVDS */
+ {
+ pVBInfo->IF_DEF_LVDS = 1 ;
+ XGINew_SetRegOR( pVBInfo->P3d4 , 0x32 , LCDSense ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x38 , ~0xE0 , 0xC0 ) ; /* LVDS on chip */
+ }
+ else
+ {
+#endif
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x4A , ~0x03 , 0x03 ) ; /* Enable GPIOA/B read */
+ Temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) & 0xC0;
+ if ( Temp == 0xC0 )
+ { /* DVI & DVO GPIOA/B pull high */
+ XGINew_SenseLCD( HwDeviceExtension, pVBInfo ) ;
+ XGINew_SetRegOR( pVBInfo->P3d4 , 0x32 , LCDSense ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x4A , ~0x20 , 0x20 ) ; /* Enable read GPIOF */
+ Temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) & 0x04 ;
+ if ( !Temp )
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x38 , ~0xE0 , 0x80 ) ; /* TMDS on chip */
+ else
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x38 , ~0xE0 , 0xA0 ) ; /* Only DVO on chip */
+ XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x20 ) ; /* Disable read GPIOF */
+ }
+#if 1
+ }
+#endif
+}
+
+/* -------------------------------------------------------- */
+/* Function : XGINew_GetXG27Sense */
+/* Input : */
+/* Output : */
+/* Description : */
+/* -------------------------------------------------------- */
+void XGINew_GetXG27Sense(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+ UCHAR Temp,bCR4A;
+
+ pVBInfo->IF_DEF_LVDS = 0 ;
+ bCR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x4A , ~0x07 , 0x07 ) ; /* Enable GPIOA/B/C read */
+ Temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) & 0x07;
+ XGINew_SetReg1( pVBInfo->P3d4, 0x4A , bCR4A ) ;
+
+ if ( Temp <= 0x02 )
+ {
+ pVBInfo->IF_DEF_LVDS = 1 ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x38 , ~0xE0 , 0xC0 ) ; /* LVDS setting */
+ XGINew_SetReg1( pVBInfo->P3d4, 0x30 , 0x21 ) ;
+ }
+ else
+ {
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x38 , ~0xE0 , 0xA0 ) ; /* TMDS/DVO setting */
+ }
+ XGINew_SetRegOR( pVBInfo->P3d4 , 0x32 , LCDSense ) ;
+
+}
+
+UCHAR GetXG21FPBits(PVB_DEVICE_INFO pVBInfo)
+{
+ UCHAR CR38,CR4A,temp;
+
+ CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x4A , ~0x10 , 0x10 ) ; /* enable GPIOE read */
+ CR38 = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+ temp =0;
+ if ( ( CR38 & 0xE0 ) > 0x80 )
+ {
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) ;
+ temp &= 0x08;
+ temp >>= 3;
+ }
+
+ XGINew_SetReg1( pVBInfo->P3d4, 0x4A , CR4A ) ;
+
+ return temp;
+}
+
+UCHAR GetXG27FPBits(PVB_DEVICE_INFO pVBInfo)
+{
+ UCHAR CR4A,temp;
+
+ CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x4A , ~0x03 , 0x03 ) ; /* enable GPIOA/B/C read */
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) ;
+ if ( temp <= 2 )
+ {
+ temp &= 0x03;
+ }
+ else
+ {
+ temp = ((temp&0x04)>>1) || ((~temp)&0x01);
+ }
+ XGINew_SetReg1( pVBInfo->P3d4, 0x4A , CR4A ) ;
+
+ return temp;
+}
+
diff --git a/drivers/staging/xgifb/vb_init.h b/drivers/staging/xgifb/vb_init.h
new file mode 100644
index 0000000..1f39d9c
--- /dev/null
+++ b/drivers/staging/xgifb/vb_init.h
@@ -0,0 +1,7 @@
+#ifndef _VBINIT_
+#define _VBINIT_
+extern BOOLEAN XGIInitNew( PXGI_HW_DEVICE_INFO HwDeviceExtension ) ;
+extern XGI21_LVDSCapStruct XGI21_LCDCapList[13];
+
+#endif
+
diff --git a/drivers/staging/xgifb/vb_setmode.c b/drivers/staging/xgifb/vb_setmode.c
new file mode 100644
index 0000000..bd7f738
--- /dev/null
+++ b/drivers/staging/xgifb/vb_setmode.c
@@ -0,0 +1,10736 @@
+#include "osdef.h"
+
+#ifdef TC
+#include <stdio.h>
+#include <string.h>
+#include <conio.h>
+#include <dos.h>
+#endif
+
+
+#ifdef LINUX_XF86
+#include "xf86.h"
+#include "xf86PciInfo.h"
+#include "xgi.h"
+#include "xgi_regs.h"
+#endif
+
+#ifdef LINUX_KERNEL
+#include <asm/io.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include "XGIfb.h"
+/*#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+#include <video/XGIfb.h>
+#else
+#include <linux/XGIfb.h>
+#endif*/
+#endif
+
+#ifdef WIN2000
+#include <dderror.h>
+#include <devioctl.h>
+#include <miniport.h>
+#include <ntddvdeo.h>
+#include <video.h>
+
+#include "xgiv.h"
+#include "dd_i2c.h"
+#include "tools.h"
+#endif
+
+#include "vb_def.h"
+#include "vgatypes.h"
+#include "vb_struct.h"
+#include "vb_util.h"
+#include "vb_table.h"
+
+
+
+#define IndexMask 0xff
+#ifndef XGI_MASK_DUAL_CHIP
+#define XGI_MASK_DUAL_CHIP 0x04 /* SR3A */
+#endif
+
+
+
+BOOLEAN XGI_IsLCDDualLink(PVB_DEVICE_INFO pVBInfo);
+BOOLEAN XGI_SetCRT2Group301(USHORT ModeNo, PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
+BOOLEAN XGI_BacklightByDrv(PVB_DEVICE_INFO pVBInfo);
+
+BOOLEAN XGI_IsLCDON(PVB_DEVICE_INFO pVBInfo);
+BOOLEAN XGI_DisableChISLCD(PVB_DEVICE_INFO pVBInfo);
+BOOLEAN XGI_EnableChISLCD(PVB_DEVICE_INFO pVBInfo);
+BOOLEAN XGI_AjustCRT2Rate(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,USHORT *i, PVB_DEVICE_INFO pVBInfo);
+BOOLEAN XGI_SearchModeID( USHORT ModeNo,USHORT *ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+BOOLEAN XGI_GetLCDInfo(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+BOOLEAN XGISetModeNew( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo ) ;
+BOOLEAN XGI_BridgeIsOn(PVB_DEVICE_INFO pVBInfo);
+UCHAR XGI_GetModePtr( USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
+USHORT XGI_GetOffset(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
+USHORT XGI_GetRatePtrCRT2( PXGI_HW_DEVICE_INFO pXGIHWDE, USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo );
+USHORT XGI_GetResInfo(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+USHORT XGI_GetColorDepth(USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
+USHORT XGI_GetVGAHT2(PVB_DEVICE_INFO pVBInfo);
+USHORT XGI_GetVCLK2Ptr(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
+void XGI_VBLongWait(PVB_DEVICE_INFO pVBInfo);
+void XGI_SaveCRT2Info(USHORT ModeNo, PVB_DEVICE_INFO pVBInfo);
+void XGI_GetCRT2Data(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_GetCRT2ResInfo(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_PreSetGroup1(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_SetGroup1(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_SetLockRegs(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_SetLCDRegs(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_SetGroup2(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void XGI_SetGroup3(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_SetGroup4(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void XGI_SetGroup5(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void* XGI_GetLcdPtr(USHORT BX, USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void* XGI_GetTVPtr(USHORT BX, USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_FirePWDEnable(PVB_DEVICE_INFO pVBInfo);
+void XGI_EnableGatingCRT(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void XGI_DisableGatingCRT(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void XGI_SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+void XGI_SetPanelPower(USHORT tempah,USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+void XGI_EnablePWD( PVB_DEVICE_INFO pVBInfo);
+void XGI_DisablePWD( PVB_DEVICE_INFO pVBInfo);
+void XGI_AutoThreshold( PVB_DEVICE_INFO pVBInfo);
+void XGI_SetTap4Regs( PVB_DEVICE_INFO pVBInfo);
+
+void XGI_DisplayOn(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo);
+void XGI_DisplayOff( PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo );
+void XGI_SetCRT1Group(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
+void XGI_SetXG21CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_SetXG21LCD(PVB_DEVICE_INFO pVBInfo,USHORT RefreshRateTableIndex,USHORT ModeNo);
+void XGI_SetXG27CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_SetXG27LCD(PVB_DEVICE_INFO pVBInfo,USHORT RefreshRateTableIndex,USHORT ModeNo);
+void XGI_UpdateXG21CRTC(USHORT ModeNo, PVB_DEVICE_INFO pVBInfo, USHORT RefreshRateTableIndex);
+void XGI_WaitDisply(PVB_DEVICE_INFO pVBInfo);
+void XGI_SenseCRT1(PVB_DEVICE_INFO pVBInfo);
+void XGI_SetSeqRegs(USHORT ModeNo,USHORT StandTableIndex,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
+void XGI_SetMiscRegs(USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_SetCRTCRegs(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_SetATTRegs(USHORT ModeNo,USHORT StandTableIndex,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo );
+void XGI_SetGRCRegs(USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_ClearExt1Regs(PVB_DEVICE_INFO pVBInfo);
+
+void XGI_SetSync(USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo);
+void XGI_SetCRT1CRTC(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo,PXGI_HW_DEVICE_INFO HwDeviceExtension);
+void XGI_SetCRT1Timing_H(PVB_DEVICE_INFO pVBInfo,PXGI_HW_DEVICE_INFO HwDeviceExtension);
+void XGI_SetCRT1Timing_V(USHORT ModeIdIndex,USHORT ModeNo,PVB_DEVICE_INFO pVBInfo);
+void XGI_SetCRT1DE(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo);
+void XGI_SetCRT1VCLK(USHORT ModeNo,USHORT ModeIdIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_SetCRT1FIFO(USHORT ModeNo,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void XGI_SetCRT1ModeRegs(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo);
+void XGI_SetVCLKState(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo);
+
+void XGI_LoadDAC(USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
+void XGI_WriteDAC(USHORT dl, USHORT ah, USHORT al, USHORT dh, PVB_DEVICE_INFO pVBInfo);
+/*void XGI_ClearBuffer(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,PVB_DEVICE_INFO pVBInfo);*/
+void XGI_SetLCDAGroup(USHORT ModeNo,USHORT ModeIdIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
+void XGI_GetLVDSResInfo( USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
+void XGI_GetLVDSData(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo);
+void XGI_ModCRT1Regs(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
+void XGI_SetLVDSRegs(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo);
+void XGI_UpdateModeInfo(PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
+void XGI_GetVGAType(PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
+void XGI_GetVBType(PVB_DEVICE_INFO pVBInfo);
+void XGI_GetVBInfo(USHORT ModeNo,USHORT ModeIdIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
+void XGI_GetTVInfo(USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
+void XGI_SetCRT2ECLK( USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo);
+void InitTo330Pointer(UCHAR,PVB_DEVICE_INFO pVBInfo);
+void XGI_GetLCDSync(USHORT* HSyncWidth, USHORT* VSyncWidth, PVB_DEVICE_INFO pVBInfo);
+void XGI_DisableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void XGI_EnableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void XGI_SetCRT2VCLK(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_OEM310Setting(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_SetDelayComp(PVB_DEVICE_INFO pVBInfo);
+void XGI_SetLCDCap(PVB_DEVICE_INFO pVBInfo);
+void XGI_SetLCDCap_A(USHORT tempcx,PVB_DEVICE_INFO pVBInfo);
+void XGI_SetLCDCap_B(USHORT tempcx,PVB_DEVICE_INFO pVBInfo);
+void SetSpectrum(PVB_DEVICE_INFO pVBInfo);
+void XGI_SetAntiFlicker(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_SetEdgeEnhance(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_SetPhaseIncr(PVB_DEVICE_INFO pVBInfo);
+void XGI_SetYFilter(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_GetTVPtrIndex2(USHORT* tempbx,UCHAR* tempcl,UCHAR* tempch, PVB_DEVICE_INFO pVBInfo);
+USHORT XGI_GetTVPtrIndex( PVB_DEVICE_INFO pVBInfo );
+void XGI_SetCRT2ModeRegs(USHORT ModeNo,PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo );
+void XGI_CloseCRTC(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo);
+void XGI_OpenCRTC(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo);
+void XGI_GetRAMDAC2DATA(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_UnLockCRT2(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo);
+void XGI_LockCRT2(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo);
+void XGINew_EnableCRT2(PVB_DEVICE_INFO pVBInfo);
+void XGINew_LCD_Wait_Time(UCHAR DelayTime, PVB_DEVICE_INFO pVBInfo);
+void XGI_LongWait(PVB_DEVICE_INFO pVBInfo);
+void XGI_SetCRT1Offset( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo );
+void XGI_GetLCDVCLKPtr(UCHAR* di_0,UCHAR *di_1, PVB_DEVICE_INFO pVBInfo);
+UCHAR XGI_GetVCLKPtr(USHORT RefreshRateTableIndex,USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void XGI_GetVCLKLen(UCHAR tempal,UCHAR* di_0,UCHAR* di_1, PVB_DEVICE_INFO pVBInfo);
+USHORT XGI_GetLCDCapPtr(PVB_DEVICE_INFO pVBInfo);
+USHORT XGI_GetLCDCapPtr1(PVB_DEVICE_INFO pVBInfo);
+XGI301C_Tap4TimingStruct* XGI_GetTap4Ptr(USHORT tempcx, PVB_DEVICE_INFO pVBInfo);
+void XGI_SetXG21FPBits(PVB_DEVICE_INFO pVBInfo);
+void XGI_SetXG27FPBits(PVB_DEVICE_INFO pVBInfo);
+UCHAR XGI_XG21GetPSCValue(PVB_DEVICE_INFO pVBInfo);
+UCHAR XGI_XG27GetPSCValue(PVB_DEVICE_INFO pVBInfo);
+void XGI_XG21BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+void XGI_XG27BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+void XGI_XG21SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+BOOLEAN XGI_XG21CheckLVDSMode(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo );
+void XGI_SetXG21LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo );
+void XGI_SetXG27LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo );
+UCHAR XGI_SetDefaultVCLK( PVB_DEVICE_INFO pVBInfo );
+
+extern void ReadVBIOSTablData( UCHAR ChipType , PVB_DEVICE_INFO pVBInfo);
+#ifdef WIN2000
+/* [Billy] 2007/05/17 For CH7007 */
+extern UCHAR CH7007TVReg_UNTSC[][8],CH7007TVReg_ONTSC[][8],CH7007TVReg_UPAL[][8],CH7007TVReg_OPAL[][8];
+extern UCHAR CH7007TVCRT1UNTSC_H[][10],CH7007TVCRT1ONTSC_H[][10],CH7007TVCRT1UPAL_H[][10],CH7007TVCRT1OPAL_H[][10] ;
+extern UCHAR CH7007TVCRT1UNTSC_V[][10],CH7007TVCRT1ONTSC_V[][10],CH7007TVCRT1UPAL_V[][10],CH7007TVCRT1OPAL_V[][10] ;
+extern UCHAR XGI7007_CHTVVCLKUNTSC[],XGI7007_CHTVVCLKONTSC[],XGI7007_CHTVVCLKUPAL[],XGI7007_CHTVVCLKOPAL[];
+
+extern BOOLEAN XGI_XG21CheckCH7007TVMode(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo ) ;
+extern void SetCH7007Regs(PXGI_HW_DEVICE_INFO HwDeviceExtension, USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo ) ;
+extern VP_STATUS TurnOnCH7007(PHW_DEVICE_EXTENSION pHWDE) ;
+extern VP_STATUS TurnOffCH7007(PHW_DEVICE_EXTENSION pHWDE) ;
+extern BOOLEAN IsCH7007TVMode(PVB_DEVICE_INFO pVBInfo) ;
+#endif
+
+/* USHORT XGINew_flag_clearbuffer; 0: no clear frame buffer 1:clear frame buffer */
+
+
+
+
+
+USHORT XGINew_MDA_DAC[]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+ 0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+ 0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+ 0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+ 0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F};
+
+USHORT XGINew_CGA_DAC[]={0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
+ 0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
+ 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
+ 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
+ 0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
+ 0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
+ 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
+ 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F};
+
+USHORT XGINew_EGA_DAC[]={0x00,0x10,0x04,0x14,0x01,0x11,0x05,0x15,
+ 0x20,0x30,0x24,0x34,0x21,0x31,0x25,0x35,
+ 0x08,0x18,0x0C,0x1C,0x09,0x19,0x0D,0x1D,
+ 0x28,0x38,0x2C,0x3C,0x29,0x39,0x2D,0x3D,
+ 0x02,0x12,0x06,0x16,0x03,0x13,0x07,0x17,
+ 0x22,0x32,0x26,0x36,0x23,0x33,0x27,0x37,
+ 0x0A,0x1A,0x0E,0x1E,0x0B,0x1B,0x0F,0x1F,
+ 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F};
+
+USHORT XGINew_VGA_DAC[]={0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
+ 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
+ 0x00,0x05,0x08,0x0B,0x0E,0x11,0x14,0x18,
+ 0x1C,0x20,0x24,0x28,0x2D,0x32,0x38,0x3F,
+
+ 0x00,0x10,0x1F,0x2F,0x3F,0x1F,0x27,0x2F,
+ 0x37,0x3F,0x2D,0x31,0x36,0x3A,0x3F,0x00,
+ 0x07,0x0E,0x15,0x1C,0x0E,0x11,0x15,0x18,
+ 0x1C,0x14,0x16,0x18,0x1A,0x1C,0x00,0x04,
+ 0x08,0x0C,0x10,0x08,0x0A,0x0C,0x0E,0x10,
+ 0x0B,0x0C,0x0D,0x0F,0x10};
+
+
+/* --------------------------------------------------------------------- */
+/* Function : InitTo330Pointer */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void InitTo330Pointer( UCHAR ChipType ,PVB_DEVICE_INFO pVBInfo)
+{
+ pVBInfo->SModeIDTable = (XGI_StStruct *) XGI330_SModeIDTable ;
+ pVBInfo->StandTable = (XGI_StandTableStruct *) XGI330_StandTable ;
+ pVBInfo->EModeIDTable = (XGI_ExtStruct *) XGI330_EModeIDTable ;
+ pVBInfo->RefIndex = (XGI_Ext2Struct *) XGI330_RefIndex ;
+ pVBInfo->XGINEWUB_CRT1Table = (XGI_CRT1TableStruct *) XGI_CRT1Table ;
+
+ /* add for new UNIVGABIOS */
+ /* XGINew_UBLCDDataTable = (XGI_LCDDataTablStruct *) XGI_LCDDataTable ; */
+ /* XGINew_UBTVDataTable = (XGI_TVDataTablStruct *) XGI_TVDataTable ; */
+
+
+ if ( ChipType >= XG40 )
+ {
+ pVBInfo->MCLKData = (XGI_MCLKDataStruct *) XGI340New_MCLKData ;
+ pVBInfo->ECLKData = (XGI_ECLKDataStruct *) XGI340_ECLKData ;
+ }
+ else
+ {
+ pVBInfo->MCLKData = (XGI_MCLKDataStruct *) XGI330New_MCLKData ;
+ pVBInfo->ECLKData = (XGI_ECLKDataStruct *) XGI330_ECLKData ;
+ }
+
+ pVBInfo->VCLKData = (XGI_VCLKDataStruct *) XGI_VCLKData ;
+ pVBInfo->VBVCLKData = (XGI_VBVCLKDataStruct *) XGI_VBVCLKData ;
+ pVBInfo->ScreenOffset = XGI330_ScreenOffset ;
+ pVBInfo->StResInfo = (XGI_StResInfoStruct *) XGI330_StResInfo ;
+ pVBInfo->ModeResInfo = (XGI_ModeResInfoStruct *) XGI330_ModeResInfo ;
+
+ pVBInfo->pOutputSelect = &XGI330_OutputSelect ;
+ pVBInfo->pSoftSetting = &XGI330_SoftSetting ;
+ pVBInfo->pSR07 = &XGI330_SR07 ;
+ pVBInfo->LCDResInfo = 0 ;
+ pVBInfo->LCDTypeInfo = 0 ;
+ pVBInfo->LCDInfo = 0 ;
+ pVBInfo->VBInfo = 0 ;
+ pVBInfo->TVInfo = 0;
+
+
+ pVBInfo->SR15 = XGI340_SR13 ;
+ pVBInfo->CR40 = XGI340_cr41 ;
+ pVBInfo->SR25 = XGI330_sr25 ;
+ pVBInfo->pSR31 = &XGI330_sr31 ;
+ pVBInfo->pSR32 = &XGI330_sr32 ;
+ pVBInfo->CR6B = XGI340_CR6B ;
+ pVBInfo->CR6E = XGI340_CR6E ;
+ pVBInfo->CR6F = XGI340_CR6F ;
+ pVBInfo->CR89 = XGI340_CR89 ;
+ pVBInfo->AGPReg = XGI340_AGPReg ;
+ pVBInfo->SR16 = XGI340_SR16 ;
+ pVBInfo->pCRCF = &XG40_CRCF ;
+ pVBInfo->pXGINew_DRAMTypeDefinition = &XG40_DRAMTypeDefinition ;
+
+
+ pVBInfo->CR49 = XGI330_CR49 ;
+ pVBInfo->pSR1F = &XGI330_SR1F ;
+ pVBInfo->pSR21 = &XGI330_SR21 ;
+ pVBInfo->pSR22 = &XGI330_SR22 ;
+ pVBInfo->pSR23 = &XGI330_SR23 ;
+ pVBInfo->pSR24 = &XGI330_SR24 ;
+ pVBInfo->pSR33 = &XGI330_SR33 ;
+
+
+
+ pVBInfo->pCRT2Data_1_2 = &XGI330_CRT2Data_1_2 ;
+ pVBInfo->pCRT2Data_4_D = &XGI330_CRT2Data_4_D ;
+ pVBInfo->pCRT2Data_4_E = &XGI330_CRT2Data_4_E ;
+ pVBInfo->pCRT2Data_4_10 = &XGI330_CRT2Data_4_10 ;
+ pVBInfo->pRGBSenseData = &XGI330_RGBSenseData ;
+ pVBInfo->pVideoSenseData = &XGI330_VideoSenseData ;
+ pVBInfo->pYCSenseData = &XGI330_YCSenseData ;
+ pVBInfo->pRGBSenseData2 = &XGI330_RGBSenseData2 ;
+ pVBInfo->pVideoSenseData2 = &XGI330_VideoSenseData2 ;
+ pVBInfo->pYCSenseData2 = &XGI330_YCSenseData2 ;
+
+ pVBInfo->NTSCTiming = XGI330_NTSCTiming ;
+ pVBInfo->PALTiming = XGI330_PALTiming ;
+ pVBInfo->HiTVExtTiming = XGI330_HiTVExtTiming ;
+ pVBInfo->HiTVSt1Timing = XGI330_HiTVSt1Timing ;
+ pVBInfo->HiTVSt2Timing = XGI330_HiTVSt2Timing ;
+ pVBInfo->HiTVTextTiming = XGI330_HiTVTextTiming ;
+ pVBInfo->YPbPr750pTiming = XGI330_YPbPr750pTiming ;
+ pVBInfo->YPbPr525pTiming = XGI330_YPbPr525pTiming ;
+ pVBInfo->YPbPr525iTiming = XGI330_YPbPr525iTiming ;
+ pVBInfo->HiTVGroup3Data = XGI330_HiTVGroup3Data ;
+ pVBInfo->HiTVGroup3Simu = XGI330_HiTVGroup3Simu ;
+ pVBInfo->HiTVGroup3Text = XGI330_HiTVGroup3Text ;
+ pVBInfo->Ren525pGroup3 = XGI330_Ren525pGroup3 ;
+ pVBInfo->Ren750pGroup3 = XGI330_Ren750pGroup3 ;
+
+
+ pVBInfo->TimingH = (XGI_TimingHStruct *) XGI_TimingH ;
+ pVBInfo->TimingV = (XGI_TimingVStruct *) XGI_TimingV ;
+ pVBInfo->UpdateCRT1 = (XGI_XG21CRT1Struct *) XGI_UpdateCRT1Table ;
+
+ pVBInfo->CHTVVCLKUNTSC = XGI330_CHTVVCLKUNTSC ;
+ pVBInfo->CHTVVCLKONTSC = XGI330_CHTVVCLKONTSC ;
+ pVBInfo->CHTVVCLKUPAL = XGI330_CHTVVCLKUPAL ;
+ pVBInfo->CHTVVCLKOPAL = XGI330_CHTVVCLKOPAL ;
+
+ /* 310 customization related */
+ if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+ pVBInfo->LCDCapList = XGI_LCDDLCapList ;
+ else
+ pVBInfo->LCDCapList = XGI_LCDCapList ;
+
+ if ( ( ChipType == XG21 ) || ( ChipType == XG27 ) )
+ pVBInfo->XG21_LVDSCapList = XGI21_LCDCapList ;
+
+ pVBInfo->XGI_TVDelayList = XGI301TVDelayList ;
+ pVBInfo->XGI_TVDelayList2 = XGI301TVDelayList2 ;
+
+
+ pVBInfo->pXGINew_I2CDefinition = &XG40_I2CDefinition ;
+
+ if ( ChipType >= XG20 )
+ pVBInfo->pXGINew_CR97 = &XG20_CR97 ;
+
+ if ( ChipType == XG27 )
+ {
+ pVBInfo->MCLKData = (XGI_MCLKDataStruct *) XGI27New_MCLKData ;
+ pVBInfo->CR40 = XGI27_cr41 ;
+ pVBInfo->pXGINew_CR97 = &XG27_CR97 ;
+ pVBInfo->pSR36 = &XG27_SR36 ;
+ pVBInfo->pCR8F = &XG27_CR8F ;
+ pVBInfo->pCRD0 = XG27_CRD0 ;
+ pVBInfo->pCRDE = XG27_CRDE ;
+ pVBInfo->pSR40 = &XG27_SR40 ;
+ pVBInfo->pSR41 = &XG27_SR41 ;
+
+ }
+
+ if ( ChipType >= XG20 )
+ {
+ pVBInfo->pDVOSetting = &XG21_DVOSetting ;
+ pVBInfo->pCR2E = &XG21_CR2E ;
+ pVBInfo->pCR2F = &XG21_CR2F ;
+ pVBInfo->pCR46 = &XG21_CR46 ;
+ pVBInfo->pCR47 = &XG21_CR47 ;
+ }
+
+}
+
+
+
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGISetModeNew */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGISetModeNew( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo )
+{
+ USHORT ModeIdIndex ;
+ /* PUCHAR pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ; */
+ VB_DEVICE_INFO VBINF;
+ PVB_DEVICE_INFO pVBInfo = &VBINF;
+ pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+ pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+ pVBInfo->IF_DEF_LVDS = 0 ;
+ pVBInfo->IF_DEF_CH7005 = 0 ;
+ pVBInfo->IF_DEF_LCDA = 1 ;
+ pVBInfo->IF_DEF_CH7017 = 0 ;
+ pVBInfo->IF_DEF_CH7007 = 0 ; /* [Billy] 2007/05/14 */
+ pVBInfo->IF_DEF_VideoCapture = 0 ;
+ pVBInfo->IF_DEF_ScaleLCD = 0 ;
+ pVBInfo->IF_DEF_OEMUtil = 0 ;
+ pVBInfo->IF_DEF_PWD = 0 ;
+
+
+ if ( HwDeviceExtension->jChipType >= XG20 ) /* kuku 2004/06/25 */
+ {
+ pVBInfo->IF_DEF_YPbPr = 0 ;
+ pVBInfo->IF_DEF_HiVision = 0 ;
+ pVBInfo->IF_DEF_CRT2Monitor = 0 ;
+ pVBInfo->VBType = 0 ; /*set VBType default 0*/
+ }
+ else if ( HwDeviceExtension->jChipType >= XG40 )
+ {
+ pVBInfo->IF_DEF_YPbPr = 1 ;
+ pVBInfo->IF_DEF_HiVision = 1 ;
+ pVBInfo->IF_DEF_CRT2Monitor = 1 ;
+ }
+ else
+ {
+ pVBInfo->IF_DEF_YPbPr = 1 ;
+ pVBInfo->IF_DEF_HiVision = 1 ;
+ pVBInfo->IF_DEF_CRT2Monitor = 0 ;
+ }
+
+ pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+ pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+ pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+ pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+ pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+ pVBInfo->P3cc = pVBInfo->BaseAddr + 0x1C ;
+ pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+ pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+ pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+ pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+ pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+ pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+ pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+ pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+ pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+ pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+ pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+ pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+
+ if ( HwDeviceExtension->jChipType == XG21 ) /* for x86 Linux, XG21 LVDS */
+ {
+ if ( ( XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) & 0xE0 ) == 0xC0 )
+ {
+ pVBInfo->IF_DEF_LVDS = 1 ;
+ }
+ }
+ if ( HwDeviceExtension->jChipType == XG27 )
+ {
+ if ( ( XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) & 0xE0 ) == 0xC0 )
+ {
+ if ( XGINew_GetReg1( pVBInfo->P3d4 , 0x30 ) & 0x20 )
+ {
+ pVBInfo->IF_DEF_LVDS = 1 ;
+ }
+ }
+ }
+
+ if ( HwDeviceExtension->jChipType < XG20 ) /* kuku 2004/06/25 */
+ XGI_GetVBType( pVBInfo ) ;
+
+ InitTo330Pointer( HwDeviceExtension->jChipType, pVBInfo ) ;
+#ifdef WIN2000
+ ReadVBIOSTablData( HwDeviceExtension->jChipType , pVBInfo) ;
+#endif
+ if ( ModeNo & 0x80 )
+ {
+ ModeNo = ModeNo & 0x7F ;
+/* XGINew_flag_clearbuffer = 0 ; */
+ }
+/* else
+ {
+ XGINew_flag_clearbuffer = 1 ;
+ }
+*/
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x05 , 0x86 ) ;
+
+ if ( HwDeviceExtension->jChipType < XG20 ) /* kuku 2004/06/25 1.Openkey */
+ XGI_UnLockCRT2( HwDeviceExtension , pVBInfo ) ;
+
+ XGI_SearchModeID( ModeNo , &ModeIdIndex, pVBInfo ) ;
+
+ XGI_GetVGAType(HwDeviceExtension, pVBInfo) ;
+
+ if ( HwDeviceExtension->jChipType < XG20 ) /* kuku 2004/06/25 */
+ {
+ XGI_GetVBInfo(ModeNo , ModeIdIndex , HwDeviceExtension, pVBInfo ) ;
+ XGI_GetTVInfo(ModeNo , ModeIdIndex, pVBInfo ) ;
+ XGI_GetLCDInfo(ModeNo , ModeIdIndex, pVBInfo ) ;
+ XGI_DisableBridge( HwDeviceExtension,pVBInfo ) ;
+/* XGI_OpenCRTC( HwDeviceExtension, pVBInfo ) ; */
+
+ if ( pVBInfo->VBInfo & ( SetSimuScanMode | SetCRT2ToLCDA ) )
+ {
+ XGI_SetCRT1Group(HwDeviceExtension , ModeNo , ModeIdIndex, pVBInfo ) ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+ {
+ XGI_SetLCDAGroup(ModeNo , ModeIdIndex , HwDeviceExtension, pVBInfo ) ;
+ }
+ }
+ else
+ {
+ if ( !( pVBInfo->VBInfo & SwitchToCRT2) )
+ {
+ XGI_SetCRT1Group( HwDeviceExtension , ModeNo , ModeIdIndex, pVBInfo ) ;
+ if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+ {
+ XGI_SetLCDAGroup( ModeNo , ModeIdIndex , HwDeviceExtension, pVBInfo ) ;
+ }
+ }
+ }
+
+ if ( pVBInfo->VBInfo & ( SetSimuScanMode | SwitchToCRT2 ) )
+ {
+ switch( HwDeviceExtension->ujVBChipID )
+ {
+ case VB_CHIP_301:
+ XGI_SetCRT2Group301( ModeNo , HwDeviceExtension, pVBInfo ) ; /*add for CRT2 */
+ break ;
+
+ case VB_CHIP_302:
+ XGI_SetCRT2Group301(ModeNo , HwDeviceExtension, pVBInfo ) ; /*add for CRT2 */
+ break ;
+
+ default:
+ break ;
+ }
+ }
+
+ XGI_SetCRT2ModeRegs( ModeNo, HwDeviceExtension,pVBInfo ) ;
+ XGI_OEM310Setting( ModeNo, ModeIdIndex,pVBInfo ) ; /*0212*/
+ XGI_CloseCRTC( HwDeviceExtension, pVBInfo ) ;
+ XGI_EnableBridge( HwDeviceExtension ,pVBInfo) ;
+ } /* !XG20 */
+ else
+ {
+#ifdef WIN2000
+ if ( pVBInfo->IF_DEF_CH7007 == 1 )
+ {
+
+ VideoDebugPrint((0, "XGISetModeNew: pVBIfo->IF_DEF_CH7007==1\n"));
+ pVBInfo->VBType = VB_CH7007 ;
+ XGI_GetVBInfo(ModeNo , ModeIdIndex , HwDeviceExtension, pVBInfo ) ;
+ XGI_GetTVInfo(ModeNo , ModeIdIndex, pVBInfo ) ;
+ XGI_GetLCDInfo(ModeNo , ModeIdIndex, pVBInfo ) ;
+ if( !(XGI_XG21CheckCH7007TVMode(ModeNo, ModeIdIndex, pVBInfo )) )
+ {
+ return FALSE;
+ }
+ }
+#endif
+
+
+ if ( pVBInfo->IF_DEF_LVDS == 1 )
+ {
+ if ( !XGI_XG21CheckLVDSMode(ModeNo , ModeIdIndex, pVBInfo) )
+ {
+ return FALSE;
+ }
+ }
+
+ if ( ModeNo <= 0x13 )
+ {
+ pVBInfo->ModeType = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag & ModeInfoFlag;
+ }
+ else
+ {
+ pVBInfo->ModeType = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag & ModeInfoFlag;
+ }
+
+ pVBInfo->SetFlag = 0 ;
+ if ( pVBInfo->IF_DEF_CH7007 != 1 )
+ {
+ pVBInfo->VBInfo = DisableCRT2Display ;
+ }
+
+
+ XGI_DisplayOff(HwDeviceExtension, pVBInfo) ;
+
+ XGI_SetCRT1Group(HwDeviceExtension , ModeNo , ModeIdIndex, pVBInfo ) ;
+
+ XGI_DisplayOn( HwDeviceExtension, pVBInfo ) ;
+ /*
+ if( HwDeviceExtension->jChipType == XG21 )
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x09 , ~0x80 , 0x80 ) ;
+ */
+ }
+
+
+/*
+ if ( ModeNo <= 0x13 )
+ {
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+ }
+ else
+ {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+ }
+ pVBInfo->ModeType = modeflag&ModeInfoFlag ;
+ pVBInfo->SetFlag = 0x00 ;
+ pVBInfo->VBInfo = DisableCRT2Display ;
+ temp = XGINew_CheckMemorySize( HwDeviceExtension , ModeNo , ModeIdIndex, pVBInfo ) ;
+
+ if ( temp == 0 )
+ return( 0 ) ;
+
+ XGI_DisplayOff( HwDeviceExtension, pVBInfo) ;
+ XGI_SetCRT1Group( HwDeviceExtension , ModeNo , ModeIdIndex, pVBInfo ) ;
+ XGI_DisplayOn( HwDeviceExtension, pVBInfo) ;
+*/
+
+ XGI_UpdateModeInfo( HwDeviceExtension, pVBInfo ) ;
+
+ if ( HwDeviceExtension->jChipType < XG20 ) /* kuku 2004/06/25 */
+{
+ XGI_LockCRT2( HwDeviceExtension, pVBInfo ) ;
+}
+
+ return( TRUE ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1Group */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1Group( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT StandTableIndex ,
+ RefreshRateTableIndex ,
+ b3CC ,
+ temp ;
+
+ USHORT XGINew_P3cc = pVBInfo->P3cc;
+
+ /* XGINew_CRT1Mode = ModeNo ; // SaveModeID */
+ StandTableIndex = XGI_GetModePtr( ModeNo , ModeIdIndex, pVBInfo ) ;
+ /* XGI_SetBIOSData(ModeNo , ModeIdIndex ) ; */
+ /* XGI_ClearBankRegs( ModeNo , ModeIdIndex ) ; */
+ XGI_SetSeqRegs( ModeNo , StandTableIndex , ModeIdIndex, pVBInfo ) ;
+ XGI_SetMiscRegs( StandTableIndex, pVBInfo ) ;
+ XGI_SetCRTCRegs( HwDeviceExtension , StandTableIndex, pVBInfo) ;
+ XGI_SetATTRegs( ModeNo , StandTableIndex , ModeIdIndex, pVBInfo ) ;
+ XGI_SetGRCRegs( StandTableIndex, pVBInfo ) ;
+ XGI_ClearExt1Regs(pVBInfo) ;
+
+/* if ( pVBInfo->IF_DEF_ExpLink ) */
+ if ( HwDeviceExtension->jChipType == XG27 )
+ {
+ if ( pVBInfo->IF_DEF_LVDS == 0 )
+ {
+ XGI_SetDefaultVCLK( pVBInfo ) ;
+ }
+ }
+
+ temp = ~ProgrammingCRT2 ;
+ pVBInfo->SetFlag &= temp ;
+ pVBInfo->SelectCRT2Rate = 0 ;
+
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ if ( pVBInfo->VBInfo & ( SetSimuScanMode | SetCRT2ToLCDA | SetInSlaveMode ) )
+ {
+ pVBInfo->SetFlag |= ProgrammingCRT2 ;
+ }
+ }
+
+ RefreshRateTableIndex = XGI_GetRatePtrCRT2( HwDeviceExtension, ModeNo , ModeIdIndex, pVBInfo ) ;
+ if ( RefreshRateTableIndex != 0xFFFF )
+ {
+ XGI_SetSync( RefreshRateTableIndex, pVBInfo ) ;
+ XGI_SetCRT1CRTC( ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo, HwDeviceExtension ) ;
+ XGI_SetCRT1DE( HwDeviceExtension , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+ XGI_SetCRT1Offset( ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+ XGI_SetCRT1VCLK( ModeNo , ModeIdIndex , HwDeviceExtension , RefreshRateTableIndex, pVBInfo ) ;
+ }
+
+ if ( ( HwDeviceExtension->jChipType >= XG20 )&&
+ ( HwDeviceExtension->jChipType < XG27 ) ) /* fix H/W DCLK/2 bug */
+ {
+ if ( ( ModeNo == 0x00 ) | (ModeNo == 0x01) )
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , 0x4E) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , 0xE9) ;
+ b3CC =(UCHAR) XGINew_GetReg2(XGINew_P3cc) ;
+ XGINew_SetReg3(XGINew_P3cc , (b3CC |= 0x0C) ) ;
+ }
+ else if ( ( ModeNo == 0x04) | ( ModeNo == 0x05) | ( ModeNo == 0x0D) )
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , 0x1B) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , 0xE3) ;
+ b3CC = (UCHAR)XGINew_GetReg2(XGINew_P3cc) ;
+ XGINew_SetReg3(XGINew_P3cc , (b3CC |= 0x0C) ) ;
+ }
+ }
+
+ if ( HwDeviceExtension->jChipType >= XG21 )
+ {
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+ if ( temp & 0xA0 )
+ {
+
+ /*XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x20 ) ;*/ /* Enable write GPIOF */
+ /*XGINew_SetRegAND( pVBInfo->P3d4 , 0x48 , ~0x20 ) ;*/ /* P. DWN */
+ /* XG21 CRT1 Timing */
+ if ( HwDeviceExtension->jChipType == XG27 )
+ XGI_SetXG27CRTC( ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo );
+ else
+ XGI_SetXG21CRTC( ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo );
+
+ XGI_UpdateXG21CRTC( ModeNo , pVBInfo , RefreshRateTableIndex) ;
+
+ if ( HwDeviceExtension->jChipType == XG27 )
+ XGI_SetXG27LCD( pVBInfo , RefreshRateTableIndex , ModeNo );
+ else
+ XGI_SetXG21LCD( pVBInfo , RefreshRateTableIndex , ModeNo );
+
+ if ( pVBInfo->IF_DEF_LVDS == 1 )
+ {
+ if ( HwDeviceExtension->jChipType == XG27 )
+ XGI_SetXG27LVDSPara(ModeNo,ModeIdIndex, pVBInfo );
+ else
+ XGI_SetXG21LVDSPara(ModeNo,ModeIdIndex, pVBInfo );
+ }
+ /*XGINew_SetRegOR( pVBInfo->P3d4 , 0x48 , 0x20 ) ;*/ /* P. ON */
+ }
+ }
+
+ pVBInfo->SetFlag &= ( ~ProgrammingCRT2 ) ;
+ XGI_SetCRT1FIFO( ModeNo , HwDeviceExtension, pVBInfo ) ;
+ XGI_SetCRT1ModeRegs( HwDeviceExtension , ModeNo , ModeIdIndex , RefreshRateTableIndex , pVBInfo) ;
+
+
+ /* XGI_LoadCharacter(); //dif ifdef TVFont */
+
+ XGI_LoadDAC( ModeNo , ModeIdIndex, pVBInfo ) ;
+ /* XGI_ClearBuffer( HwDeviceExtension , ModeNo, pVBInfo ) ; */
+#ifdef WIN2000
+ if ( pVBInfo->IF_DEF_CH7007 == 1 ) /* [Billy] 2007/05/14 */
+ {
+ VideoDebugPrint((0, "XGI_SetCRT1Group: VBInfo->IF_DEF_CH7007==1\n"));
+ SetCH7007Regs(HwDeviceExtension, ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo ) ; /* 07/05/28 */
+ }
+#endif
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetModePtr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGI_GetModePtr( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ UCHAR index ;
+
+ if ( ModeNo <= 0x13 )
+ index = pVBInfo->SModeIDTable[ ModeIdIndex ].St_StTableIndex ;
+ else
+ {
+ if ( pVBInfo->ModeType <= 0x02 )
+ index = 0x1B ; /* 02 -> ModeEGA */
+ else
+ index = 0x0F ;
+ }
+ return( index ) ; /* Get pVBInfo->StandTable index */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetBIOSData */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+/*UCHAR XGI_SetBIOSData( USHORT ModeNo , USHORT ModeIdIndex )
+{
+ return( 0 ) ;
+}
+*/
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_ClearBankRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+/*UCHAR XGI_ClearBankRegs( USHORT ModeNo , USHORT ModeIdIndex )
+{
+ return( 0 ) ;
+}
+*/
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetSeqRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetSeqRegs( USHORT ModeNo , USHORT StandTableIndex , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ UCHAR tempah ,
+ SRdata ;
+
+ USHORT i ,
+ modeflag ;
+
+ if ( ModeNo <= 0x13 )
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+ else
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x00 , 0x03 ) ; /* Set SR0 */
+ tempah=pVBInfo->StandTable[ StandTableIndex ].SR[ 0 ] ;
+
+ i = SetCRT2ToLCDA ;
+ if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+ {
+ tempah |= 0x01 ;
+ }
+ else
+ {
+ if ( pVBInfo->VBInfo & ( SetCRT2ToTV | SetCRT2ToLCD ) )
+ {
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ tempah |= 0x01 ;
+ }
+ }
+
+ tempah |= 0x20 ; /* screen off */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x01 , tempah ) ; /* Set SR1 */
+
+ for( i = 02 ; i <= 04 ; i++ )
+ {
+ SRdata = pVBInfo->StandTable[ StandTableIndex ].SR[ i - 1 ] ; /* Get SR2,3,4 from file */
+ XGINew_SetReg1( pVBInfo->P3c4 , i , SRdata ) ; /* Set SR2 3 4 */
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetMiscRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetMiscRegs( USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ UCHAR Miscdata ;
+
+ Miscdata = pVBInfo->StandTable[ StandTableIndex ].MISC ; /* Get Misc from file */
+/*
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+ {
+ Miscdata |= 0x0C ;
+ }
+ }
+*/
+
+ XGINew_SetReg3( pVBInfo->P3c2 , Miscdata ) ; /* Set Misc(3c2) */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRTCRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRTCRegs( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ UCHAR CRTCdata ;
+ USHORT i ;
+
+ CRTCdata = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+ CRTCdata &= 0x7f ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , CRTCdata ) ; /* Unlock CRTC */
+
+ for( i = 0 ; i <= 0x18 ; i++ )
+ {
+ CRTCdata = pVBInfo->StandTable[ StandTableIndex ].CRTC[ i ] ; /* Get CRTC from file */
+ XGINew_SetReg1( pVBInfo->P3d4 , i , CRTCdata ) ; /* Set CRTC( 3d4 ) */
+ }
+/*
+ if ( ( HwDeviceExtension->jChipType == XGI_630 )&& ( HwDeviceExtension->jChipRevision == 0x30 ) )
+ {
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ {
+ if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToTV ) )
+ {
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x18 , 0xFE ) ;
+ }
+ }
+ }
+*/
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetATTRegs( USHORT ModeNo , USHORT StandTableIndex , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ UCHAR ARdata ;
+ USHORT i ,
+ modeflag ;
+
+ if ( ModeNo <= 0x13 )
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+ else
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+
+ for( i = 0 ; i <= 0x13 ; i++ )
+ {
+ ARdata = pVBInfo->StandTable[ StandTableIndex ].ATTR[ i ] ;
+ if ( modeflag & Charx8Dot ) /* ifndef Dot9 */
+ {
+ if ( i == 0x13 )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+ ARdata = 0 ;
+ else
+ {
+ if ( pVBInfo->VBInfo & ( SetCRT2ToTV | SetCRT2ToLCD ) )
+ {
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ ARdata = 0 ;
+ }
+ }
+ }
+ }
+
+ XGINew_GetReg2( pVBInfo->P3da ) ; /* reset 3da */
+ XGINew_SetReg3( pVBInfo->P3c0 , i ) ; /* set index */
+ XGINew_SetReg3( pVBInfo->P3c0 , ARdata ) ; /* set data */
+ }
+
+ XGINew_GetReg2( pVBInfo->P3da ) ; /* reset 3da */
+ XGINew_SetReg3( pVBInfo->P3c0 , 0x14 ) ; /* set index */
+ XGINew_SetReg3( pVBInfo->P3c0 , 0x00 ) ; /* set data */
+ XGINew_GetReg2( pVBInfo->P3da ) ; /* Enable Attribute */
+ XGINew_SetReg3( pVBInfo->P3c0 , 0x20 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetGRCRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetGRCRegs( USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ UCHAR GRdata ;
+ USHORT i ;
+
+ for( i = 0 ; i <= 0x08 ; i++ )
+ {
+ GRdata = pVBInfo->StandTable[ StandTableIndex ].GRC[ i ] ; /* Get GR from file */
+ XGINew_SetReg1( pVBInfo->P3ce , i , GRdata ) ; /* Set GR(3ce) */
+ }
+
+ if ( pVBInfo->ModeType > ModeVGA )
+ {
+ GRdata = ( UCHAR )XGINew_GetReg1( pVBInfo->P3ce , 0x05 ) ;
+ GRdata &= 0xBF ; /* 256 color disable */
+ XGINew_SetReg1( pVBInfo->P3ce , 0x05 , GRdata ) ;
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_ClearExt1Regs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_ClearExt1Regs(PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT i ;
+
+ for( i = 0x0A ; i <= 0x0E ; i++ )
+ XGINew_SetReg1( pVBInfo->P3c4 , i , 0x00 ) ; /* Clear SR0A-SR0E */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetDefaultVCLK */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGI_SetDefaultVCLK( PVB_DEVICE_INFO pVBInfo )
+{
+
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x31 , ~0x30 , 0x20 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , pVBInfo->VCLKData[ 0 ].SR2B ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , pVBInfo->VCLKData[ 0 ].SR2C ) ;
+
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x31 , ~0x30 , 0x10 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , pVBInfo->VCLKData[ 1 ].SR2B ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , pVBInfo->VCLKData[ 1 ].SR2C ) ;
+
+ XGINew_SetRegAND( pVBInfo->P3c4 , 0x31 , ~0x30 ) ;
+ return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetRatePtrCRT2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetRatePtrCRT2( PXGI_HW_DEVICE_INFO pXGIHWDE, USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ SHORT LCDRefreshIndex[] = { 0x00 , 0x00 , 0x03 , 0x01 } ,
+ LCDARefreshIndex[] = { 0x00 , 0x00 , 0x03 , 0x01 , 0x01 , 0x01 , 0x01 } ;
+
+ USHORT RefreshRateTableIndex , i ,
+ modeflag , index , temp ;
+
+ if ( ModeNo <= 0x13 )
+ {
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+ }
+ else
+ {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+ }
+
+ if ( pVBInfo->IF_DEF_CH7005 == 1 )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ if ( modeflag & HalfDCLK )
+ return( 0 ) ;
+ }
+ }
+
+ if ( ModeNo < 0x14 )
+ return( 0xFFFF ) ;
+
+ index = XGINew_GetReg1( pVBInfo->P3d4 , 0x33 ) ;
+ index = index >> pVBInfo->SelectCRT2Rate ;
+ index &= 0x0F ;
+
+ if ( pVBInfo->LCDInfo & LCDNonExpanding )
+ index = 0 ;
+
+ if ( index > 0 )
+ index-- ;
+
+ if ( pVBInfo->SetFlag & ProgrammingCRT2 )
+ {
+ if ( pVBInfo->IF_DEF_CH7005 == 1 )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ index = 0 ;
+ }
+ }
+
+ if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+ {
+ if( pVBInfo->IF_DEF_LVDS == 0 )
+ {
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ temp = LCDARefreshIndex[ pVBInfo->LCDResInfo & 0x0F ] ; /* 301b */
+ else
+ temp = LCDRefreshIndex[ pVBInfo->LCDResInfo & 0x0F ] ;
+
+ if ( index > temp )
+ {
+ index = temp ;
+ }
+ }
+ else
+ {
+ index = 0 ;
+ }
+ }
+ }
+
+ RefreshRateTableIndex = pVBInfo->EModeIDTable[ ModeIdIndex ].REFindex ;
+ ModeNo = pVBInfo->RefIndex[ RefreshRateTableIndex ].ModeID ;
+ if ( pXGIHWDE->jChipType >= XG20 ) /* for XG20, XG21, XG27 */
+ {
+ /*
+ if ( pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag & XG2xNotSupport )
+ {
+ index++;
+ }
+ */
+ if ( ( pVBInfo->RefIndex[ RefreshRateTableIndex ].XRes == 800 ) &&
+ ( pVBInfo->RefIndex[ RefreshRateTableIndex ].YRes == 600 ) )
+ {
+ index++;
+ }
+/* Alan 10/19/2007; do the similiar adjustment like XGISearchCRT1Rate() */
+ if ( ( pVBInfo->RefIndex[ RefreshRateTableIndex ].XRes == 1024 ) &&
+ ( pVBInfo->RefIndex[ RefreshRateTableIndex ].YRes == 768 ) )
+ {
+ index++;
+ }
+ if ( ( pVBInfo->RefIndex[ RefreshRateTableIndex ].XRes == 1280 ) &&
+ ( pVBInfo->RefIndex[ RefreshRateTableIndex ].YRes == 1024 ) )
+ {
+ index++;
+ }
+ }
+
+ i = 0 ;
+ do
+ {
+ if ( pVBInfo->RefIndex[ RefreshRateTableIndex + i ].ModeID != ModeNo )
+ break ;
+ temp = pVBInfo->RefIndex[ RefreshRateTableIndex + i ].Ext_InfoFlag ;
+ temp &= ModeInfoFlag ;
+ if ( temp < pVBInfo->ModeType )
+ break ;
+ i++ ;
+ index-- ;
+
+ } while( index != 0xFFFF ) ;
+ if ( !( pVBInfo->VBInfo & SetCRT2ToRAMDAC ) )
+ {
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ {
+ temp = pVBInfo->RefIndex[ RefreshRateTableIndex + i - 1 ].Ext_InfoFlag ;
+ if ( temp & InterlaceMode )
+ {
+ i++ ;
+ }
+ }
+ }
+ i-- ;
+ if ( ( pVBInfo->SetFlag & ProgrammingCRT2 ) )
+ {
+ temp = XGI_AjustCRT2Rate( ModeNo , ModeIdIndex , RefreshRateTableIndex , &i, pVBInfo) ;
+ }
+ return( RefreshRateTableIndex + i ) ; /*return(0x01|(temp1<<1)); */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_AjustCRT2Rate */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_AjustCRT2Rate( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex , USHORT *i, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT tempax ,
+ tempbx ,
+ resinfo ,
+ modeflag ,
+ infoflag ;
+
+ if ( ModeNo <= 0x13 )
+ {
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ; /* si+St_ModeFlag */
+ }
+ else
+ {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+ }
+
+ resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+ tempbx = pVBInfo->RefIndex[ RefreshRateTableIndex + ( *i ) ].ModeID ;
+ tempax = 0 ;
+
+ if ( pVBInfo->IF_DEF_LVDS == 0 )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+ {
+ tempax |= SupportRAMDAC2 ;
+
+ if ( pVBInfo->VBType & VB_XGI301C )
+ tempax |= SupportCRT2in301C ;
+ }
+
+ if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) /* 301b */
+ {
+ tempax |= SupportLCD ;
+
+ if ( pVBInfo->LCDResInfo != Panel1280x1024 )
+ {
+ if ( pVBInfo->LCDResInfo != Panel1280x960 )
+ {
+ if ( pVBInfo->LCDInfo & LCDNonExpanding )
+ {
+ if ( resinfo >= 9 )
+ {
+ tempax = 0 ;
+ return( 0 ) ;
+ }
+ }
+ }
+ }
+ }
+
+ if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV ) /* for HiTV */
+ {
+ if ( ( pVBInfo->VBType & VB_XGI301LV ) && ( pVBInfo->VBExtInfo == VB_YPbPr1080i ) )
+ {
+ tempax |= SupportYPbPr ;
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ {
+ if ( resinfo == 4 )
+ return( 0 ) ;
+
+ if ( resinfo == 3 )
+ return( 0 ) ;
+
+ if ( resinfo > 7 )
+ return( 0 ) ;
+ }
+ }
+ else
+ {
+ tempax |= SupportHiVisionTV ;
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ {
+ if ( resinfo == 4 )
+ return( 0 ) ;
+
+ if ( resinfo == 3 )
+ {
+ if ( pVBInfo->SetFlag & TVSimuMode )
+ return( 0 ) ;
+ }
+
+ if ( resinfo > 7 )
+ return( 0 ) ;
+ }
+ }
+ }
+ else
+ {
+ if ( pVBInfo->VBInfo & ( SetCRT2ToAVIDEO | SetCRT2ToSVIDEO | SetCRT2ToSCART | SetCRT2ToYPbPr | SetCRT2ToHiVisionTV ) )
+ {
+ tempax |= SupportTV ;
+
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ tempax |= SupportTV1024 ;
+ }
+
+ if ( !( pVBInfo->VBInfo & SetPALTV ) )
+ {
+ if ( modeflag & NoSupportSimuTV )
+ {
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ {
+ if ( !( pVBInfo->VBInfo & SetNotSimuMode ) )
+ {
+ return( 0 ) ;
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ else /* for LVDS */
+ {
+ if ( pVBInfo->IF_DEF_CH7005 == 1 )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ tempax |= SupportCHTV ;
+ }
+ }
+
+ if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+ {
+ tempax |= SupportLCD ;
+
+ if ( resinfo > 0x08 )
+ return( 0 ) ; /* 1024x768 */
+
+ if ( pVBInfo->LCDResInfo < Panel1024x768 )
+ {
+ if ( resinfo > 0x07 )
+ return( 0 ) ; /* 800x600 */
+
+ if ( resinfo == 0x04 )
+ return( 0 ) ; /* 512x384 */
+ }
+ }
+ }
+
+ for( ; pVBInfo->RefIndex[ RefreshRateTableIndex + ( *i ) ].ModeID == tempbx ; ( *i )-- )
+ {
+ infoflag = pVBInfo->RefIndex[ RefreshRateTableIndex + ( *i ) ].Ext_InfoFlag ;
+ if ( infoflag & tempax )
+ {
+ return( 1 ) ;
+ }
+ if ( ( *i ) == 0 )
+ break ;
+ }
+
+ for( ( *i ) = 0 ; ; ( *i )++ )
+ {
+ infoflag = pVBInfo->RefIndex[ RefreshRateTableIndex + ( *i ) ].Ext_InfoFlag ;
+ if ( pVBInfo->RefIndex[ RefreshRateTableIndex + ( *i ) ].ModeID != tempbx )
+ {
+ return( 0 ) ;
+ }
+
+ if ( infoflag & tempax )
+ {
+ return( 1 ) ;
+ }
+ }
+ return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetSync */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetSync(USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT sync ,
+ temp ;
+
+ sync = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag >> 8 ; /* di+0x00 */
+ sync &= 0xC0 ;
+ temp = 0x2F ;
+ temp |= sync ;
+ XGINew_SetReg3( pVBInfo->P3c2 , temp ) ; /* Set Misc(3c2) */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1CRTC */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1CRTC( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo, PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+ UCHAR index ,
+ data ;
+
+ USHORT i ;
+
+ index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ; /* Get index */
+ index = index&IndexMask ;
+
+ data =( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+ data &= 0x7F ;
+ XGINew_SetReg1(pVBInfo->P3d4,0x11,data); /* Unlock CRTC */
+
+ for( i = 0 ; i < 8 ; i++ )
+ pVBInfo->TimingH[ 0 ].data[ i ] = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ i ] ;
+
+ for( i = 0 ; i < 7 ; i++ )
+ pVBInfo->TimingV[ 0 ].data[ i ] = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ i + 8 ] ;
+
+ XGI_SetCRT1Timing_H( pVBInfo, HwDeviceExtension ) ;
+
+
+
+ XGI_SetCRT1Timing_V( ModeIdIndex , ModeNo, pVBInfo ) ;
+
+
+ if( pVBInfo->ModeType > 0x03 )
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x14 , 0x4F ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1Timing_H */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1Timing_H( PVB_DEVICE_INFO pVBInfo, PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+ UCHAR data , data1, pushax;
+ USHORT i , j ;
+
+ /* XGINew_SetReg1( pVBInfo->P3d4 , 0x51 , 0 ) ; */
+ /* XGINew_SetReg1( pVBInfo->P3d4 , 0x56 , 0 ) ; */
+ /* XGINew_SetRegANDOR( pVBInfo->P3d4 ,0x11 , 0x7f , 0x00 ) ; */
+
+ data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ; /* unlock cr0-7 */
+ data &= 0x7F ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , data ) ;
+
+ data = pVBInfo->TimingH[ 0 ].data[ 0 ] ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0 , data ) ;
+
+ for( i = 0x01 ; i <= 0x04 ; i++ )
+ {
+ data = pVBInfo->TimingH[ 0 ].data[ i ] ;
+ XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 1 ) , data ) ;
+ }
+
+ for( i = 0x05 ; i <= 0x06 ; i++ )
+ {
+ data = pVBInfo->TimingH[ 0 ].data[ i ];
+ XGINew_SetReg1( pVBInfo->P3c4 ,( USHORT )( i + 6 ) , data ) ;
+ }
+
+ j = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x0e ) ;
+ j &= 0x1F ;
+ data = pVBInfo->TimingH[ 0 ].data[ 7 ] ;
+ data &= 0xE0 ;
+ data |= j ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x0e , data ) ;
+
+ if ( HwDeviceExtension->jChipType >= XG20 )
+ {
+ data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x04 ) ;
+ data = data - 1 ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x04 , data ) ;
+ data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x05 ) ;
+ data1 = data ;
+ data1 &= 0xE0 ;
+ data &= 0x1F ;
+ if ( data == 0 )
+ {
+ pushax = data ;
+ data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x0c ) ;
+ data &= 0xFB ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x0c , data ) ;
+ data = pushax ;
+ }
+ data = data - 1 ;
+ data |= data1 ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x05 , data ) ;
+ data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x0e ) ;
+ data = data >> 5 ;
+ data = data + 3 ;
+ if ( data > 7 )
+ data = data - 7 ;
+ data = data << 5 ;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0e , ~0xE0 , data ) ;
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1Timing_V */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1Timing_V( USHORT ModeIdIndex , USHORT ModeNo,PVB_DEVICE_INFO pVBInfo )
+{
+ UCHAR data ;
+ USHORT i , j ;
+
+ /* XGINew_SetReg1( pVBInfo->P3d4 , 0x51 , 0 ) ; */
+ /* XGINew_SetReg1( pVBInfo->P3d4 , 0x56 , 0 ) ; */
+ /* XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x11 , 0x7f , 0x00 ) ; */
+
+ for( i = 0x00 ; i <= 0x01 ; i++ )
+ {
+ data = pVBInfo->TimingV[ 0 ].data[ i ] ;
+ XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 6 ) , data ) ;
+ }
+
+ for( i = 0x02 ; i <= 0x03 ; i++ )
+ {
+ data = pVBInfo->TimingV[ 0 ].data[ i ] ;
+ XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 0x0e ) , data ) ;
+ }
+
+ for( i = 0x04 ; i <= 0x05 ; i++ )
+ {
+ data = pVBInfo->TimingV[ 0 ].data[ i ] ;
+ XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 0x11 ) , data ) ;
+ }
+
+ j = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x0a ) ;
+ j &= 0xC0 ;
+ data = pVBInfo->TimingV[ 0 ].data[ 6 ] ;
+ data &= 0x3F ;
+ data |= j ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x0a , data ) ;
+
+ data = pVBInfo->TimingV[ 0 ].data[ 6 ] ;
+ data &= 0x80 ;
+ data = data >> 2 ;
+
+ if ( ModeNo <= 0x13 )
+ i = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+ else
+ i = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+
+ i &= DoubleScanMode ;
+ if ( i )
+ data |= 0x80 ;
+
+ j = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x09 ) ;
+ j &= 0x5F ;
+ data |= j ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x09 , data ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetXG21CRTC */
+/* Input : Stand or enhance CRTC table */
+/* Output : Fill CRT Hsync/Vsync to SR2E/SR2F/SR30/SR33/SR34/SR3F */
+/* Description : Set LCD timing */
+/* --------------------------------------------------------------------- */
+void XGI_SetXG21CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo)
+{
+ UCHAR StandTableIndex, index, Tempax, Tempbx, Tempcx, Tempdx ;
+ USHORT Temp1, Temp2, Temp3 ;
+
+ if ( ModeNo <= 0x13 )
+ {
+ StandTableIndex = XGI_GetModePtr( ModeNo , ModeIdIndex, pVBInfo ) ;
+ Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 4 ] ; /* CR04 HRS */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , Tempax ) ; /* SR2E [7:0]->HRS */
+ Tempbx = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 5 ] ; /* Tempbx: CR05 HRE */
+ Tempbx &= 0x1F ; /* Tempbx: HRE[4:0] */
+ Tempcx = Tempax ;
+ Tempcx &= 0xE0 ; /* Tempcx: HRS[7:5] */
+ Tempdx = Tempcx | Tempbx ; /* Tempdx(HRE): HRS[7:5]HRE[4:0] */
+ if ( Tempbx < ( Tempax & 0x1F ) ) /* IF HRE < HRS */
+ Tempdx |= 0x20 ; /* Tempdx: HRE = HRE + 0x20 */
+ Tempdx <<= 2 ; /* Tempdx << 2 */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2F , Tempdx ) ; /* SR2F [7:2]->HRE */
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x30 , 0xE3 , 00 ) ;
+
+ Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 16 ] ; /* Tempax: CR16 VRS */
+ Tempbx = Tempax ; /* Tempbx=Tempax */
+ Tempax &= 0x01 ; /* Tempax: VRS[0] */
+ XGINew_SetRegOR( pVBInfo->P3c4 , 0x33 , Tempax ) ; /* SR33[0]->VRS */
+ Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 7 ] ; /* Tempax: CR7 VRS */
+ Tempdx = Tempbx >> 1 ; /* Tempdx: VRS[7:1] */
+ Tempcx = Tempax & 0x04 ; /* Tempcx: CR7[2] */
+ Tempcx <<= 5 ; /* Tempcx[7]: VRS[8] */
+ Tempdx |= Tempcx ; /* Tempdx: VRS[8:1] */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , Tempdx ) ; /* SR34[7:0]: VRS[8:1] */
+
+ Temp1 = Tempcx << 1 ; /* Temp1[8]: VRS[8] UCHAR -> USHORT */
+ Temp1 |= Tempbx ; /* Temp1[8:0]: VRS[8:0] */
+ Tempax &= 0x80 ; /* Tempax[7]: CR7[7] */
+ Temp2 = Tempax << 2 ; /* Temp2[9]: VRS[9] */
+ Temp1 |= Temp2 ; /* Temp1[9:0]: VRS[9:0] */
+
+ Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 17 ] ; /* CR16 VRE */
+ Tempax &= 0x0F ; /* Tempax[3:0]: VRE[3:0] */
+ Temp2 = Temp1 & 0x3F0 ; /* Temp2[9:4]: VRS[9:4] */
+ Temp2 |= Tempax ; /* Temp2[9:0]: VRE[9:0] */
+ Temp3 = Temp1 & 0x0F ; /* Temp3[3:0]: VRS[3:0] */
+ if ( Tempax < Temp3 ) /* VRE[3:0]<VRS[3:0] */
+ Temp2 |= 0x10 ; /* Temp2: VRE + 0x10 */
+ Temp2 &= 0xFF ; /* Temp2[7:0]: VRE[7:0] */
+ Tempax = (UCHAR)Temp2 ; /* Tempax[7:0]: VRE[7:0] */
+ Tempax <<= 2 ; /* Tempax << 2: VRE[5:0] */
+ Temp1 &= 0x600 ; /* Temp1[10:9]: VRS[10:9] */
+ Temp1 >>= 9 ; /* [10:9]->[1:0] */
+ Tempbx = (UCHAR)Temp1 ; /* Tempbx[1:0]: VRS[10:9] */
+ Tempax |= Tempbx ; /* VRE[5:0]VRS[10:9] */
+ Tempax &= 0x7F ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x3F , Tempax ) ; /* SR3F D[7:2]->VRE D[1:0]->VRS */
+ }
+ else
+ {
+ index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+ Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 3 ] ; /* Tempax: CR4 HRS */
+ Tempcx = Tempax ; /* Tempcx: HRS */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , Tempax ) ; /* SR2E[7:0]->HRS */
+
+ Tempdx = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 5 ] ; /* SRB */
+ Tempdx &= 0xC0 ; /* Tempdx[7:6]: SRB[7:6] */
+ Temp1 = Tempdx ; /* Temp1[7:6]: HRS[9:8] */
+ Temp1 <<= 2 ; /* Temp1[9:8]: HRS[9:8] */
+ Temp1 |= Tempax ; /* Temp1[9:0]: HRS[9:0] */
+
+ Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 4 ] ; /* CR5 HRE */
+ Tempax &= 0x1F ; /* Tempax[4:0]: HRE[4:0] */
+
+ Tempbx = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 6 ] ; /* SRC */
+ Tempbx &= 0x04 ; /* Tempbx[2]: HRE[5] */
+ Tempbx <<= 3 ; /* Tempbx[5]: HRE[5] */
+ Tempax |= Tempbx ; /* Tempax[5:0]: HRE[5:0] */
+
+ Temp2 = Temp1 & 0x3C0 ; /* Temp2[9:6]: HRS[9:6] */
+ Temp2 |= Tempax ; /* Temp2[9:0]: HRE[9:0] */
+
+ Tempcx &= 0x3F ; /* Tempcx[5:0]: HRS[5:0] */
+ if( Tempax < Tempcx ) /* HRE < HRS */
+ Temp2 |= 0x40 ; /* Temp2 + 0x40 */
+
+ Temp2 &= 0xFF ;
+ Tempax = (UCHAR)Temp2 ; /* Tempax: HRE[7:0] */
+ Tempax <<= 2 ; /* Tempax[7:2]: HRE[5:0] */
+ Tempdx >>= 6 ; /* Tempdx[7:6]->[1:0] HRS[9:8] */
+ Tempax |= Tempdx ; /* HRE[5:0]HRS[9:8] */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2F , Tempax ) ; /* SR2F D[7:2]->HRE, D[1:0]->HRS */
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x30 , 0xE3 , 00 ) ;
+
+ Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 10 ] ; /* CR10 VRS */
+ Tempbx = Tempax ; /* Tempbx: VRS */
+ Tempax &= 0x01 ; /* Tempax[0]: VRS[0] */
+ XGINew_SetRegOR( pVBInfo->P3c4 , 0x33 , Tempax ) ; /* SR33[0]->VRS[0] */
+ Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 9 ] ; /* CR7[2][7] VRE */
+ Tempcx = Tempbx >> 1 ; /* Tempcx[6:0]: VRS[7:1] */
+ Tempdx = Tempax & 0x04 ; /* Tempdx[2]: CR7[2] */
+ Tempdx <<= 5 ; /* Tempdx[7]: VRS[8] */
+ Tempcx |= Tempdx ; /* Tempcx[7:0]: VRS[8:1] */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , Tempcx ) ; /* SR34[8:1]->VRS */
+
+ Temp1 = Tempdx ; /* Temp1[7]: Tempdx[7] */
+ Temp1 <<= 1 ; /* Temp1[8]: VRS[8] */
+ Temp1 |= Tempbx ; /* Temp1[8:0]: VRS[8:0] */
+ Tempax &= 0x80 ;
+ Temp2 = Tempax << 2 ; /* Temp2[9]: VRS[9] */
+ Temp1 |= Temp2 ; /* Temp1[9:0]: VRS[9:0] */
+ Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 14 ] ; /* Tempax: SRA */
+ Tempax &= 0x08 ; /* Tempax[3]: VRS[3] */
+ Temp2 = Tempax ;
+ Temp2 <<= 7 ; /* Temp2[10]: VRS[10] */
+ Temp1 |= Temp2 ; /* Temp1[10:0]: VRS[10:0] */
+
+ Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 11 ] ; /* Tempax: CR11 VRE */
+ Tempax &= 0x0F ; /* Tempax[3:0]: VRE[3:0] */
+ Tempbx = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 14 ] ; /* Tempbx: SRA */
+ Tempbx &= 0x20 ; /* Tempbx[5]: VRE[5] */
+ Tempbx >>= 1 ; /* Tempbx[4]: VRE[4] */
+ Tempax |= Tempbx ; /* Tempax[4:0]: VRE[4:0] */
+ Temp2 = Temp1 & 0x7E0 ; /* Temp2[10:5]: VRS[10:5] */
+ Temp2 |= Tempax ; /* Temp2[10:5]: VRE[10:5] */
+
+ Temp3 = Temp1 & 0x1F ; /* Temp3[4:0]: VRS[4:0] */
+ if ( Tempax < Temp3 ) /* VRE < VRS */
+ Temp2 |= 0x20 ; /* VRE + 0x20 */
+
+ Temp2 &= 0xFF ;
+ Tempax = (UCHAR)Temp2 ; /* Tempax: VRE[7:0] */
+ Tempax <<= 2 ; /* Tempax[7:0]; VRE[5:0]00 */
+ Temp1 &= 0x600 ; /* Temp1[10:9]: VRS[10:9] */
+ Temp1 >>= 9 ; /* Temp1[1:0]: VRS[10:9] */
+ Tempbx = (UCHAR)Temp1 ;
+ Tempax |= Tempbx ; /* Tempax[7:0]: VRE[5:0]VRS[10:9] */
+ Tempax &= 0x7F ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x3F , Tempax ) ; /* SR3F D[7:2]->VRE D[1:0]->VRS */
+ }
+}
+
+void XGI_SetXG27CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT StandTableIndex, index, Tempax, Tempbx, Tempcx, Tempdx ;
+
+ if ( ModeNo <= 0x13 )
+ {
+ StandTableIndex = XGI_GetModePtr( ModeNo , ModeIdIndex, pVBInfo ) ;
+ Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 4 ] ; /* CR04 HRS */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , Tempax ) ; /* SR2E [7:0]->HRS */
+ Tempbx = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 5 ] ; /* Tempbx: CR05 HRE */
+ Tempbx &= 0x1F ; /* Tempbx: HRE[4:0] */
+ Tempcx = Tempax ;
+ Tempcx &= 0xE0 ; /* Tempcx: HRS[7:5] */
+ Tempdx = Tempcx | Tempbx ; /* Tempdx(HRE): HRS[7:5]HRE[4:0] */
+ if ( Tempbx < ( Tempax & 0x1F ) ) /* IF HRE < HRS */
+ Tempdx |= 0x20 ; /* Tempdx: HRE = HRE + 0x20 */
+ Tempdx <<= 2 ; /* Tempdx << 2 */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2F , Tempdx ) ; /* SR2F [7:2]->HRE */
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x30 , 0xE3 , 00 ) ;
+
+ Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 16 ] ; /* Tempax: CR10 VRS */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , Tempax ) ; /* SR34[7:0]->VRS */
+ Tempcx = Tempax ; /* Tempcx=Tempax=VRS[7:0] */
+ Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 7 ] ; /* Tempax[7][2]: CR7[7][2] VRS[9][8] */
+ Tempbx = Tempax ; /* Tempbx=CR07 */
+ Tempax &= 0x04 ; /* Tempax[2]: CR07[2] VRS[8] */
+ Tempax >>= 2;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x01, Tempax ) ; /* SR35 D[0]->VRS D[8] */
+ Tempcx |= (Tempax << 8) ; /* Tempcx[8] |= VRS[8] */
+ Tempcx |= (Tempbx & 0x80)<<2; /* Tempcx[9] |= VRS[9] */
+
+
+ Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 17 ] ; /* CR11 VRE */
+ Tempax &= 0x0F ; /* Tempax: VRE[3:0] */
+ Tempbx = Tempcx ; /* Tempbx=Tempcx=VRS[9:0] */
+ Tempbx &= 0x3F0 ; /* Tempbx[9:4]: VRS[9:4] */
+ Tempbx |= Tempax ; /* Tempbx[9:0]: VRE[9:0] */
+ if ( Tempax <= (Tempcx & 0x0F) ) /* VRE[3:0]<=VRS[3:0] */
+ Tempbx |= 0x10 ; /* Tempbx: VRE + 0x10 */
+ Tempax = (UCHAR)Tempbx & 0xFF; /* Tempax[7:0]: VRE[7:0] */
+ Tempax <<= 2 ; /* Tempax << 2: VRE[5:0] */
+ Tempcx = (Tempcx&0x600)>>8; /* Tempcx VRS[10:9] */
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x3F , ~0xFC, Tempax ) ; /* SR3F D[7:2]->VRE D[5:0] */
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x06, Tempcx ) ; /* SR35 D[2:1]->VRS[10:9] */
+ }
+ else
+ {
+ index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+ Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 3 ] ; /* Tempax: CR4 HRS */
+ Tempbx = Tempax ; /* Tempbx: HRS[7:0] */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , Tempax ) ; /* SR2E[7:0]->HRS */
+
+ Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 5 ] ; /* SR0B */
+ Tempax &= 0xC0 ; /* Tempax[7:6]: SR0B[7:6]: HRS[9:8]*/
+ Tempbx |= (Tempax << 2); /* Tempbx: HRS[9:0] */
+
+ Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 4 ] ; /* CR5 HRE */
+ Tempax &= 0x1F ; /* Tempax[4:0]: HRE[4:0] */
+ Tempcx = Tempax ; /* Tempcx: HRE[4:0] */
+
+ Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 6 ] ; /* SRC */
+ Tempax &= 0x04 ; /* Tempax[2]: HRE[5] */
+ Tempax <<= 3 ; /* Tempax[5]: HRE[5] */
+ Tempcx |= Tempax ; /* Tempcx[5:0]: HRE[5:0] */
+
+ Tempbx = Tempbx & 0x3C0 ; /* Tempbx[9:6]: HRS[9:6] */
+ Tempbx |= Tempcx ; /* Tempbx: HRS[9:6]HRE[5:0] */
+
+ Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 3 ] ; /* Tempax: CR4 HRS */
+ Tempax &= 0x3F ; /* Tempax: HRS[5:0] */
+ if( Tempcx <= Tempax ) /* HRE[5:0] < HRS[5:0] */
+ Tempbx += 0x40 ; /* Tempbx= Tempbx + 0x40 : HRE[9:0]*/
+
+ Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 5 ] ; /* SR0B */
+ Tempax &= 0xC0 ; /* Tempax[7:6]: SR0B[7:6]: HRS[9:8]*/
+ Tempax >>= 6; /* Tempax[1:0]: HRS[9:8]*/
+ Tempax |= ((Tempbx << 2) & 0xFF); /* Tempax[7:2]: HRE[5:0] */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2F , Tempax ) ; /* SR2F [7:2][1:0]: HRE[5:0]HRS[9:8] */
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x30 , 0xE3 , 00 ) ;
+
+ Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 10 ] ; /* CR10 VRS */
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , Tempax ) ; /* SR34[7:0]->VRS[7:0] */
+
+ Tempcx = Tempax ; /* Tempcx <= VRS[7:0] */
+ Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 9 ] ; /* CR7[7][2] VRS[9][8] */
+ Tempbx = Tempax ; /* Tempbx <= CR07[7:0] */
+ Tempax = Tempax & 0x04 ; /* Tempax[2]: CR7[2]: VRS[8] */
+ Tempax >>= 2 ; /* Tempax[0]: VRS[8] */
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x01 , Tempax ) ; /* SR35[0]: VRS[8] */
+ Tempcx |= (Tempax<<8) ; /* Tempcx <= VRS[8:0] */
+ Tempcx |= ((Tempbx&0x80)<<2) ; /* Tempcx <= VRS[9:0] */
+ Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 14 ] ; /* Tempax: SR0A */
+ Tempax &= 0x08; /* SR0A[3] VRS[10] */
+ Tempcx |= (Tempax<<7) ; /* Tempcx <= VRS[10:0] */
+
+
+ Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 11 ] ; /* Tempax: CR11 VRE */
+ Tempax &= 0x0F ; /* Tempax[3:0]: VRE[3:0] */
+ Tempbx = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 14 ] ; /* Tempbx: SR0A */
+ Tempbx &= 0x20 ; /* Tempbx[5]: SR0A[5]: VRE[4] */
+ Tempbx >>= 1 ; /* Tempbx[4]: VRE[4] */
+ Tempax |= Tempbx ; /* Tempax[4:0]: VRE[4:0] */
+ Tempbx = Tempcx ; /* Tempbx: VRS[10:0] */
+ Tempbx &= 0x7E0 ; /* Tempbx[10:5]: VRS[10:5] */
+ Tempbx |= Tempax ; /* Tempbx: VRS[10:5]VRE[4:0] */
+
+ if ( Tempbx <= Tempcx ) /* VRE <= VRS */
+ Tempbx |= 0x20 ; /* VRE + 0x20 */
+
+ Tempax = (Tempbx<<2) & 0xFF ; /* Tempax: Tempax[7:0]; VRE[5:0]00 */
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x3F , ~0xFC , Tempax ) ; /* SR3F[7:2]:VRE[5:0] */
+ Tempax = Tempcx >> 8;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x07 , Tempax ) ; /* SR35[2:0]:VRS[10:8] */
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetXG21LCD */
+/* Input : */
+/* Output : FCLK duty cycle, FCLK delay compensation */
+/* Description : All values set zero */
+/* --------------------------------------------------------------------- */
+void XGI_SetXG21LCD(PVB_DEVICE_INFO pVBInfo,USHORT RefreshRateTableIndex,USHORT ModeNo)
+{
+ USHORT Data , Temp , b3CC ;
+ USHORT XGI_P3cc ;
+
+ XGI_P3cc = pVBInfo->P3cc ;
+
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x2E , 0x00 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x2F , 0x00 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x46 , 0x00 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x47 , 0x00 ) ;
+ if ( ((*pVBInfo->pDVOSetting)&0xC0) == 0xC0 )
+ {
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x2E , *pVBInfo->pCR2E ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x2F , *pVBInfo->pCR2F ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x46 , *pVBInfo->pCR46 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x47 , *pVBInfo->pCR47 ) ;
+ }
+
+ Temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x37 ) ;
+
+ if ( Temp & 0x01 )
+ {
+ XGINew_SetRegOR( pVBInfo->P3c4 , 0x06 , 0x40 ) ; /* 18 bits FP */
+ XGINew_SetRegOR( pVBInfo->P3c4 , 0x09 , 0x40 ) ;
+ }
+
+ XGINew_SetRegOR( pVBInfo->P3c4 , 0x1E , 0x01 ) ; /* Negative blank polarity */
+
+ XGINew_SetRegAND( pVBInfo->P3c4 , 0x30 , ~0x20 ) ;
+ XGINew_SetRegAND( pVBInfo->P3c4 , 0x35 , ~0x80 ) ;
+
+ if ( ModeNo <= 0x13 )
+ {
+ b3CC = (UCHAR) XGINew_GetReg2( XGI_P3cc ) ;
+ if ( b3CC & 0x40 )
+ XGINew_SetRegOR( pVBInfo->P3c4 , 0x30 , 0x20 ) ; /* Hsync polarity */
+ if ( b3CC & 0x80 )
+ XGINew_SetRegOR( pVBInfo->P3c4 , 0x35 , 0x80 ) ; /* Vsync polarity */
+ }
+ else
+ {
+ Data = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+ if ( Data & 0x4000 )
+ XGINew_SetRegOR( pVBInfo->P3c4 , 0x30 , 0x20 ) ; /* Hsync polarity */
+ if ( Data & 0x8000 )
+ XGINew_SetRegOR( pVBInfo->P3c4 , 0x35 , 0x80 ) ; /* Vsync polarity */
+ }
+}
+
+void XGI_SetXG27LCD(PVB_DEVICE_INFO pVBInfo,USHORT RefreshRateTableIndex,USHORT ModeNo)
+{
+ USHORT Data , Temp , b3CC ;
+ USHORT XGI_P3cc ;
+
+ XGI_P3cc = pVBInfo->P3cc ;
+
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x2E , 0x00 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x2F , 0x00 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x46 , 0x00 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x47 , 0x00 ) ;
+
+ Temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x37 ) ;
+ if ( ( Temp & 0x03 ) == 0 ) /* dual 12 */
+ {
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x46 , 0x13 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x47 , 0x13 ) ;
+ }
+
+ if ( ((*pVBInfo->pDVOSetting)&0xC0) == 0xC0 )
+ {
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x2E , *pVBInfo->pCR2E ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x2F , *pVBInfo->pCR2F ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x46 , *pVBInfo->pCR46 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x47 , *pVBInfo->pCR47 ) ;
+ }
+
+ XGI_SetXG27FPBits(pVBInfo);
+
+ XGINew_SetRegOR( pVBInfo->P3c4 , 0x1E , 0x01 ) ; /* Negative blank polarity */
+
+ XGINew_SetRegAND( pVBInfo->P3c4 , 0x30 , ~0x20 ) ; /* Hsync polarity */
+ XGINew_SetRegAND( pVBInfo->P3c4 , 0x35 , ~0x80 ) ; /* Vsync polarity */
+
+ if ( ModeNo <= 0x13 )
+ {
+ b3CC = (UCHAR) XGINew_GetReg2( XGI_P3cc ) ;
+ if ( b3CC & 0x40 )
+ XGINew_SetRegOR( pVBInfo->P3c4 , 0x30 , 0x20 ) ; /* Hsync polarity */
+ if ( b3CC & 0x80 )
+ XGINew_SetRegOR( pVBInfo->P3c4 , 0x35 , 0x80 ) ; /* Vsync polarity */
+ }
+ else
+ {
+ Data = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+ if ( Data & 0x4000 )
+ XGINew_SetRegOR( pVBInfo->P3c4 , 0x30 , 0x20 ) ; /* Hsync polarity */
+ if ( Data & 0x8000 )
+ XGINew_SetRegOR( pVBInfo->P3c4 , 0x35 , 0x80 ) ; /* Vsync polarity */
+ }
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_UpdateXG21CRTC */
+/* Input : */
+/* Output : CRT1 CRTC */
+/* Description : Modify CRT1 Hsync/Vsync to fix LCD mode timing */
+/* --------------------------------------------------------------------- */
+void XGI_UpdateXG21CRTC( USHORT ModeNo , PVB_DEVICE_INFO pVBInfo , USHORT RefreshRateTableIndex )
+{
+ int i , index = -1;
+
+ XGINew_SetRegAND( pVBInfo->P3d4 , 0x11 , 0x7F ) ; /* Unlock CR0~7 */
+ if ( ModeNo <= 0x13 )
+ {
+ for( i = 0 ; i < 12 ; i++ )
+ {
+ if ( ModeNo == pVBInfo->UpdateCRT1[ i ].ModeID )
+ index = i ;
+ }
+ }
+ else
+ {
+ if ( ModeNo == 0x2E && ( pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC == RES640x480x60 ) )
+ index = 12 ;
+ else if ( ModeNo == 0x2E && ( pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC == RES640x480x72 ) )
+ index = 13 ;
+ else if ( ModeNo == 0x2F )
+ index = 14 ;
+ else if ( ModeNo == 0x50 )
+ index = 15 ;
+ else if ( ModeNo == 0x59 )
+ index = 16 ;
+ }
+
+ if( index != -1 )
+ {
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x02 , pVBInfo->UpdateCRT1[ index ].CR02 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x03 , pVBInfo->UpdateCRT1[ index ].CR03 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x15 , pVBInfo->UpdateCRT1[ index ].CR15 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x16 , pVBInfo->UpdateCRT1[ index ].CR16 ) ;
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1DE */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1DE( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo,USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT resindex ,
+ tempax ,
+ tempbx ,
+ tempcx ,
+ temp ,
+ modeflag ;
+
+ UCHAR data ;
+
+ resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+
+ if ( ModeNo <= 0x13 )
+ {
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+ tempax = pVBInfo->StResInfo[ resindex ].HTotal ;
+ tempbx = pVBInfo->StResInfo[ resindex ].VTotal ;
+ }
+ else
+ {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+ tempax = pVBInfo->ModeResInfo[ resindex ].HTotal ;
+ tempbx = pVBInfo->ModeResInfo[ resindex ].VTotal ;
+ }
+
+ if ( modeflag & HalfDCLK )
+ tempax = tempax >> 1 ;
+
+ if ( ModeNo > 0x13 )
+ {
+ if ( modeflag & HalfDCLK )
+ tempax = tempax << 1 ;
+
+ temp = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+
+ if ( temp & InterlaceMode )
+ tempbx = tempbx >> 1 ;
+
+ if ( modeflag & DoubleScanMode )
+ tempbx = tempbx << 1 ;
+ }
+
+ tempcx = 8 ;
+
+ /* if ( !( modeflag & Charx8Dot ) ) */
+ /* tempcx = 9 ; */
+
+ tempax /= tempcx ;
+ tempax -= 1 ;
+ tempbx -= 1 ;
+ tempcx = tempax ;
+ temp = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+ data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+ data &= 0x7F ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , data ) ; /* Unlock CRTC */
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x01 , ( USHORT )( tempcx & 0xff ) ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x0b , ~0x0c , ( USHORT )( ( tempcx & 0x0ff00 ) >> 10 ) ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x12 , ( USHORT )( tempbx & 0xff ) ) ;
+ tempax = 0 ;
+ tempbx = tempbx >> 8 ;
+
+ if ( tempbx & 0x01 )
+ tempax |= 0x02 ;
+
+ if ( tempbx & 0x02 )
+ tempax |= 0x40 ;
+
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x42 , tempax ) ;
+ data =( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x07 ) ;
+ data &= 0xFF ;
+ tempax = 0 ;
+
+ if ( tempbx & 0x04 )
+ tempax |= 0x02 ;
+
+ XGINew_SetRegANDOR( pVBInfo->P3d4 ,0x0a , ~0x02 , tempax ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , temp ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetResInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetResInfo(USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT resindex ;
+
+ if ( ModeNo <= 0x13 )
+ {
+ resindex = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ; /* si+St_ResInfo */
+ }
+ else
+ {
+ resindex = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ; /* si+Ext_ResInfo */
+ }
+ return( resindex ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1Offset */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1Offset( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT temp ,
+ ah ,
+ al ,
+ temp2 ,
+ i ,
+ DisplayUnit ;
+
+ /* GetOffset */
+ temp = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeInfo ;
+ temp = temp >> 8 ;
+ temp = pVBInfo->ScreenOffset[ temp ] ;
+
+ temp2 = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+ temp2 &= InterlaceMode ;
+
+ if ( temp2 )
+ temp = temp << 1;
+
+ temp2 = pVBInfo->ModeType - ModeEGA ;
+
+ switch( temp2 )
+ {
+ case 0:
+ temp2 = 1 ;
+ break ;
+ case 1:
+ temp2 = 2 ;
+ break ;
+ case 2:
+ temp2 = 4 ;
+ break ;
+ case 3:
+ temp2 = 4 ;
+ break ;
+ case 4:
+ temp2 = 6 ;
+ break;
+ case 5:
+ temp2 = 8 ;
+ break ;
+ default:
+ break ;
+ }
+
+ if ( ( ModeNo >= 0x26 ) && ( ModeNo <= 0x28 ) )
+ temp = temp * temp2 + temp2 / 2 ;
+ else
+ temp *= temp2 ;
+
+ /* SetOffset */
+ DisplayUnit = temp ;
+ temp2 = temp ;
+ temp = temp >> 8 ; /* ah */
+ temp &= 0x0F ;
+ i = XGINew_GetReg1( pVBInfo->P3c4 , 0x0E ) ;
+ i &= 0xF0 ;
+ i |= temp ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x0E , i ) ;
+
+ temp =( UCHAR )temp2 ;
+ temp &= 0xFF ; /* al */
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x13 , temp ) ;
+
+ /* SetDisplayUnit */
+ temp2 = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+ temp2 &= InterlaceMode ;
+ if ( temp2 )
+ DisplayUnit >>= 1 ;
+
+ DisplayUnit = DisplayUnit << 5 ;
+ ah = ( DisplayUnit & 0xff00 ) >> 8 ;
+ al = DisplayUnit & 0x00ff ;
+ if ( al == 0 )
+ ah += 1 ;
+ else
+ ah += 2 ;
+
+ if ( HwDeviceExtension->jChipType >= XG20 )
+ if ( ( ModeNo == 0x4A ) | (ModeNo == 0x49 ) )
+ ah -= 1 ;
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x10 , ah ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1VCLK */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1VCLK( USHORT ModeNo , USHORT ModeIdIndex ,
+ PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ UCHAR index , data ;
+ USHORT vclkindex ;
+
+ if ( pVBInfo->IF_DEF_LVDS == 1 )
+ {
+ index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRTVCLK ;
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x31 ) & 0xCF ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , data ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , pVBInfo->VCLKData[ index ].SR2B ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , pVBInfo->VCLKData[ index ].SR2C ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2D , 0x01 ) ;
+ }
+ else if ( ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) ) && ( pVBInfo->VBInfo & SetCRT2ToLCDA ) )
+ {
+ vclkindex = XGI_GetVCLK2Ptr( ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x31 ) & 0xCF ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , data ) ;
+ data = pVBInfo->VBVCLKData[ vclkindex ].Part4_A ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , data ) ;
+ data = pVBInfo->VBVCLKData[ vclkindex ].Part4_B ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , data ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2D , 0x01 ) ;
+ }
+ else
+ {
+ index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRTVCLK ;
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x31 ) & 0xCF ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , data ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , pVBInfo->VCLKData[ index ].SR2B ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , pVBInfo->VCLKData[ index ].SR2C ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2D , 0x01 ) ;
+ }
+
+ if ( HwDeviceExtension->jChipType >= XG20 )
+ {
+ if ( pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag & HalfDCLK )
+ {
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x2B ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , data ) ;
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x2C ) ;
+ index = data ;
+ index &= 0xE0 ;
+ data &= 0x1F ;
+ data = data << 1 ;
+ data += 1 ;
+ data |= index ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , data ) ;
+ }
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1FIFO */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1FIFO( USHORT ModeNo , PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT data ;
+
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x3D ) ;
+ data &= 0xfe ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x3D , data ) ; /* diable auto-threshold */
+
+ if ( ModeNo > 0x13 )
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x08 , 0x34 ) ;
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x09 ) ;
+ data &= 0xC0 ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x09 , data | 0x30) ;
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x3D ) ;
+ data |= 0x01 ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x3D , data ) ;
+ }
+ else
+ {
+ if (HwDeviceExtension->jChipType == XG27)
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x08 , 0x0E ) ;
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x09 ) ;
+ data &= 0xC0 ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x09 , data | 0x20 ) ;
+ }
+ else
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x08 , 0xAE ) ;
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x09 ) ;
+ data &= 0xF0 ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x09 , data ) ;
+ }
+ }
+
+ if (HwDeviceExtension->jChipType == XG21)
+ {
+ XGI_SetXG21FPBits(pVBInfo); /* Fix SR9[7:6] can't read back */
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1ModeRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1ModeRegs( PXGI_HW_DEVICE_INFO HwDeviceExtension ,
+ USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT data ,
+ data2 ,
+ data3 ,
+ infoflag = 0 ,
+ modeflag ,
+ resindex ,
+ xres ;
+
+ if ( ModeNo > 0x13 )
+ {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+ infoflag = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+ }
+ else
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ; /* si+St_ModeFlag */
+
+ if ( XGINew_GetReg1( pVBInfo->P3d4 , 0x31 ) & 0x01 )
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x1F , 0x3F , 0x00 ) ;
+
+ if ( ModeNo > 0x13 )
+ data = infoflag ;
+ else
+ data = 0 ;
+
+ data2 = 0 ;
+
+ if ( ModeNo > 0x13 )
+ {
+ if ( pVBInfo->ModeType > 0x02 )
+ {
+ data2 |= 0x02 ;
+ data3 = pVBInfo->ModeType - ModeVGA ;
+ data3 = data3 << 2 ;
+ data2 |= data3 ;
+ }
+ }
+
+ data &= InterlaceMode ;
+
+ if ( data )
+ data2 |= 0x20 ;
+
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x06 , ~0x3F , data2 ) ;
+ /* XGINew_SetReg1(pVBInfo->P3c4,0x06,data2); */
+ resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+ if ( ModeNo <= 0x13 )
+ xres = pVBInfo->StResInfo[ resindex ].HTotal ;
+ else
+ xres = pVBInfo->ModeResInfo[ resindex ].HTotal ; /* xres->ax */
+
+ data = 0x0000 ;
+ if ( infoflag & InterlaceMode )
+ {
+ if ( xres == 1024 )
+ data = 0x0035 ;
+ else if ( xres == 1280 )
+ data = 0x0048 ;
+ }
+
+ data2 = data & 0x00FF ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x19 , 0xFF , data2 ) ;
+ data2 = ( data & 0xFF00 ) >> 8 ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x19 , 0xFC , data2 ) ;
+
+ if( modeflag & HalfDCLK )
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x01 , 0xF7 , 0x08 ) ;
+
+ data2 = 0 ;
+
+ if ( modeflag & LineCompareOff )
+ data2 |= 0x08 ;
+
+ if ( ModeNo > 0x13 )
+ {
+ if ( pVBInfo->ModeType == ModeEGA )
+ data2 |= 0x40 ;
+ }
+
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0F , ~0x48 , data2 ) ;
+ data = 0x60 ;
+ if ( pVBInfo->ModeType != ModeText )
+ {
+ data = data ^ 0x60 ;
+ if ( pVBInfo->ModeType != ModeEGA )
+ {
+ data = data ^ 0xA0 ;
+ }
+ }
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x21 , 0x1F , data ) ;
+
+ XGI_SetVCLKState( HwDeviceExtension , ModeNo , RefreshRateTableIndex, pVBInfo) ;
+
+ /* if(modeflag&HalfDCLK)//030305 fix lowresolution bug */
+ /* if(XGINew_IF_DEF_NEW_LOWRES) */
+ /* XGI_VesaLowResolution(ModeNo,ModeIdIndex);//030305 fix lowresolution bug */
+
+ data=XGINew_GetReg1( pVBInfo->P3d4 , 0x31 ) ;
+
+ if (HwDeviceExtension->jChipType == XG27 )
+ {
+ if ( data & 0x40 )
+ data = 0x2c ;
+ else
+ data = 0x6c ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x52 , data ) ;
+ XGINew_SetRegOR( pVBInfo->P3d4 , 0x51 , 0x10 ) ;
+ }
+ else
+ if (HwDeviceExtension->jChipType >= XG20 )
+ {
+ if ( data & 0x40 )
+ data = 0x33 ;
+ else
+ data = 0x73 ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x52 , data ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x51 , 0x02 ) ;
+ }
+ else
+ {
+ if ( data & 0x40 )
+ data = 0x2c ;
+ else
+ data = 0x6c ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x52 , data ) ;
+ }
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetVCLKState */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetVCLKState( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo , USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT data ,
+ data2 = 0 ;
+ SHORT VCLK ;
+
+ UCHAR index ;
+
+ if ( ModeNo <= 0x13 )
+ VCLK = 0 ;
+ else
+ {
+ index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRTVCLK ;
+ index &= IndexMask ;
+ VCLK = pVBInfo->VCLKData[ index ].CLOCK ;
+ }
+
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x32 ) ;
+ data &= 0xf3 ;
+ if ( VCLK >= 200 )
+ data |= 0x0c ; /* VCLK > 200 */
+
+ if ( HwDeviceExtension->jChipType >= XG20 )
+ data &= ~0x04 ; /* 2 pixel mode */
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x32 , data ) ;
+
+ if ( HwDeviceExtension->jChipType < XG20 )
+ {
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x1F ) ;
+ data &= 0xE7 ;
+ if ( VCLK < 200 )
+ data |= 0x10 ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x1F , data ) ;
+ }
+
+/* Jong for Adavantech LCD ripple issue
+ if ( ( VCLK >= 0 ) && ( VCLK < 135 ) )
+ data2 = 0x03 ;
+ else if ( ( VCLK >= 135 ) && ( VCLK < 160 ) )
+ data2 = 0x02 ;
+ else if ( ( VCLK >= 160 ) && ( VCLK < 260 ) )
+ data2 = 0x01 ;
+ else if ( VCLK > 260 )
+ data2 = 0x00 ;
+*/
+ data2 = 0x00 ;
+
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x07 , 0xFC , data2 ) ;
+ if (HwDeviceExtension->jChipType >= XG27 )
+ {
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x40 , 0xFC , data2&0x03 ) ;
+ }
+
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_VesaLowResolution */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+/*void XGI_VesaLowResolution( USHORT ModeNo , USHORT ModeIdIndex ,PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT modeflag;
+
+ if ( ModeNo > 0x13 )
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+ else
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+
+ if ( ModeNo > 0x13 )
+ {
+ if ( modeflag & DoubleScanMode )
+ {
+ if ( modeflag & HalfDCLK )
+ {
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ if ( !( pVBInfo->VBInfo & SetCRT2ToRAMDAC ) )
+ {
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ {
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x01 , 0xf7 , 0x00 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0f , 0x7f , 0x00 ) ;
+ return ;
+ }
+ }
+ }
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0f , 0xff , 0x80 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x01 , 0xf7 , 0x00 ) ;
+ return ;
+ }
+ }
+ }
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0f , 0x7f , 0x00 ) ;
+}
+*/
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_LoadDAC */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_LoadDAC( USHORT ModeNo , USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT data , data2 , time ,
+ i , j , k , m , n , o ,
+ si , di , bx , dl , al , ah , dh ,
+ *table = NULL ;
+
+ if ( ModeNo <= 0x13 )
+ data = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+ else
+ data = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+
+ data &= DACInfoFlag ;
+ time = 64 ;
+
+ if ( data == 0x00 )
+ table = XGINew_MDA_DAC ;
+ else if ( data == 0x08 )
+ table = XGINew_CGA_DAC ;
+ else if ( data == 0x10 )
+ table = XGINew_EGA_DAC ;
+ else if ( data == 0x18 )
+ {
+ time = 256 ;
+ table = XGINew_VGA_DAC ;
+ }
+
+ if ( time == 256 )
+ j = 16 ;
+ else
+ j = time ;
+
+ XGINew_SetReg3( pVBInfo->P3c6 , 0xFF ) ;
+ XGINew_SetReg3( pVBInfo->P3c8 , 0x00 ) ;
+
+ for( i = 0 ; i < j ; i++ )
+ {
+ data = table[ i ] ;
+
+ for( k = 0 ; k < 3 ; k++ )
+ {
+ data2 = 0 ;
+
+ if ( data & 0x01 )
+ data2 = 0x2A ;
+
+ if ( data & 0x02 )
+ data2 += 0x15 ;
+
+ XGINew_SetReg3( pVBInfo->P3c9 , data2 ) ;
+ data = data >> 2 ;
+ }
+ }
+
+ if ( time == 256 )
+ {
+ for( i = 16 ; i < 32 ; i++ )
+ {
+ data = table[ i ] ;
+
+ for( k = 0 ; k < 3 ; k++ )
+ XGINew_SetReg3( pVBInfo->P3c9 , data ) ;
+ }
+
+ si = 32 ;
+
+ for( m = 0 ; m < 9 ; m++ )
+ {
+ di = si ;
+ bx = si + 0x04 ;
+ dl = 0 ;
+
+ for( n = 0 ; n < 3 ; n++ )
+ {
+ for( o = 0 ; o < 5 ; o++ )
+ {
+ dh = table[ si ] ;
+ ah = table[ di ] ;
+ al = table[ bx ] ;
+ si++ ;
+ XGI_WriteDAC( dl , ah , al , dh, pVBInfo ) ;
+ }
+
+ si -= 2 ;
+
+ for( o = 0 ; o < 3 ; o++ )
+ {
+ dh = table[ bx ] ;
+ ah = table[ di ] ;
+ al = table[ si ] ;
+ si-- ;
+ XGI_WriteDAC( dl , ah , al , dh, pVBInfo ) ;
+ }
+
+ dl++ ;
+ }
+
+ si += 5 ;
+ }
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_WriteDAC */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_WriteDAC( USHORT dl , USHORT ah , USHORT al , USHORT dh,PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT temp , bh , bl ;
+
+ bh = ah ;
+ bl = al ;
+
+ if ( dl != 0 )
+ {
+ temp = bh ;
+ bh = dh ;
+ dh = temp ;
+ if ( dl == 1 )
+ {
+ temp = bl ;
+ bl = dh ;
+ dh = temp ;
+ }
+ else
+ {
+ temp = bl ;
+ bl = bh ;
+ bh = temp ;
+ }
+ }
+ XGINew_SetReg3( pVBInfo->P3c9 , ( USHORT )dh ) ;
+ XGINew_SetReg3( pVBInfo->P3c9 , ( USHORT )bh ) ;
+ XGINew_SetReg3( pVBInfo->P3c9 , ( USHORT )bl ) ;
+}
+
+#if 0
+/* --------------------------------------------------------------------- */
+/* Function : XGI_ClearBuffer */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_ClearBuffer( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo, PVB_DEVICE_INFO pVBInfo)
+{
+ PVOID VideoMemoryAddress = ( PVOID )HwDeviceExtension->pjVideoMemoryAddress ;
+ ULONG AdapterMemorySize = ( ULONG )HwDeviceExtension->ulVideoMemorySize ;
+ PUSHORT pBuffer ;
+#ifndef LINUX_XF86
+ int i ;
+#endif
+
+ if ( pVBInfo->ModeType >= ModeEGA )
+ {
+ if ( ModeNo > 0x13 )
+ {
+ AdapterMemorySize = 0x40000 ; /* clear 256k */
+ /* GetDRAMSize( HwDeviceExtension ) ; */
+ XGI_SetMemory( VideoMemoryAddress , AdapterMemorySize , 0 ) ;
+ }
+ else
+ {
+/*
+ pBuffer = VideoMemoryAddress ;
+ for( i = 0 ; i < 0x4000 ; i++ )
+ pBuffer[ i ] = 0x0000 ;
+*/
+ }
+ }
+ else
+ {
+ pBuffer = VideoMemoryAddress ;
+ if ( pVBInfo->ModeType < ModeCGA )
+ {
+/*
+ for ( i = 0 ; i < 0x4000 ; i++ )
+ pBuffer[ i ] = 0x0720 ;
+*/
+ }
+ else
+ XGI_SetMemory( VideoMemoryAddress , 0x8000 , 0 ) ;
+ }
+}
+
+#endif
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLCDAGroup */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetLCDAGroup( USHORT ModeNo , USHORT ModeIdIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT RefreshRateTableIndex ;
+ /* USHORT temp ; */
+
+ /* pVBInfo->SelectCRT2Rate = 0 ; */
+
+ pVBInfo->SetFlag |= ProgrammingCRT2 ;
+ RefreshRateTableIndex = XGI_GetRatePtrCRT2( HwDeviceExtension, ModeNo , ModeIdIndex, pVBInfo ) ;
+ XGI_GetLVDSResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+ XGI_GetLVDSData( ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo);
+ XGI_ModCRT1Regs( ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+ XGI_SetLVDSRegs( ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+ XGI_SetCRT2ECLK( ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLVDSResInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetLVDSResInfo( USHORT ModeNo , USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT resindex , xres , yres , modeflag ;
+
+ if ( ModeNo <= 0x13 )
+ {
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ; /* si+St_ResInfo */
+ }
+ else
+ {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ; /* si+Ext_ResInfo */
+ }
+
+
+ /* if ( ModeNo > 0x13 ) */
+ /* modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ; */
+ /* else */
+ /* modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ; */
+
+ if ( ModeNo <= 0x13 )
+ {
+ resindex = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ; /* si+St_ResInfo */
+ }
+ else
+ {
+ resindex = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ; /* si+Ext_ResInfo */
+ }
+
+ /* resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ; */
+
+ if ( ModeNo <= 0x13 )
+ {
+ xres = pVBInfo->StResInfo[ resindex ].HTotal ;
+ yres = pVBInfo->StResInfo[ resindex ].VTotal ;
+ }
+ else
+ {
+ xres = pVBInfo->ModeResInfo[ resindex ].HTotal ;
+ yres = pVBInfo->ModeResInfo[ resindex ].VTotal ;
+ }
+ if ( ModeNo > 0x13 )
+ {
+ if ( modeflag & HalfDCLK )
+ xres = xres << 1 ;
+
+ if ( modeflag & DoubleScanMode )
+ yres = yres << 1 ;
+ }
+ /* if ( modeflag & Charx8Dot ) */
+ /* { */
+
+ if ( xres == 720 )
+ xres = 640 ;
+
+ /* } */
+ pVBInfo->VGAHDE = xres ;
+ pVBInfo->HDE = xres ;
+ pVBInfo->VGAVDE = yres ;
+ pVBInfo->VDE = yres ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLVDSData */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetLVDSData( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT tempbx ;
+ XGI330_LVDSDataStruct *LCDPtr = NULL ;
+ XGI330_CHTVDataStruct *TVPtr = NULL ;
+
+ tempbx = 2 ;
+
+ if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+ {
+ LCDPtr = ( XGI330_LVDSDataStruct * )XGI_GetLcdPtr( tempbx, ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo) ;
+ pVBInfo->VGAHT = LCDPtr->VGAHT ;
+ pVBInfo->VGAVT = LCDPtr->VGAVT ;
+ pVBInfo->HT = LCDPtr->LCDHT ;
+ pVBInfo->VT = LCDPtr->LCDVT ;
+ }
+ if ( pVBInfo->IF_DEF_CH7017 == 1 )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ TVPtr = ( XGI330_CHTVDataStruct * )XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+ pVBInfo->VGAHT = TVPtr->VGAHT ;
+ pVBInfo->VGAVT = TVPtr->VGAVT ;
+ pVBInfo->HT = TVPtr->LCDHT ;
+ pVBInfo->VT = TVPtr->LCDVT ;
+ }
+ }
+
+ if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+ {
+ if ( !( pVBInfo->LCDInfo & ( SetLCDtoNonExpanding | EnableScalingLCD ) ) )
+ {
+ if ( ( pVBInfo->LCDResInfo == Panel1024x768 ) || ( pVBInfo->LCDResInfo == Panel1024x768x75 ) )
+ {
+ pVBInfo->HDE = 1024 ;
+ pVBInfo->VDE = 768 ;
+ }
+ else if ( ( pVBInfo->LCDResInfo == Panel1280x1024 ) || ( pVBInfo->LCDResInfo == Panel1280x1024x75 ) )
+ {
+ pVBInfo->HDE = 1280 ;
+ pVBInfo->VDE = 1024 ;
+ }
+ else if ( pVBInfo->LCDResInfo == Panel1400x1050 )
+ {
+ pVBInfo->HDE = 1400 ;
+ pVBInfo->VDE = 1050 ;
+ }
+ else
+ {
+ pVBInfo->HDE = 1600 ;
+ pVBInfo->VDE = 1200 ;
+ }
+ }
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_ModCRT1Regs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_ModCRT1Regs( USHORT ModeNo , USHORT ModeIdIndex ,
+ USHORT RefreshRateTableIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo )
+{
+ UCHAR index ;
+ USHORT tempbx , i ;
+ XGI_LVDSCRT1HDataStruct *LCDPtr = NULL ;
+ XGI_LVDSCRT1VDataStruct *LCDPtr1 =NULL ;
+ /* XGI330_CHTVDataStruct *TVPtr = NULL ; */
+ XGI_CH7007TV_TimingHStruct *CH7007TV_TimingHPtr = NULL;
+ XGI_CH7007TV_TimingVStruct *CH7007TV_TimingVPtr = NULL;
+
+ if( ModeNo <= 0x13 )
+ index = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ;
+ else
+ index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
+
+ index= index & IndexMask ;
+
+ if ( ( pVBInfo->IF_DEF_ScaleLCD == 0 ) || ( ( pVBInfo->IF_DEF_ScaleLCD == 1 ) && ( !( pVBInfo->LCDInfo & EnableScalingLCD ) ) ) )
+ {
+ tempbx = 0 ;
+
+ if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+ {
+ LCDPtr = ( XGI_LVDSCRT1HDataStruct * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+
+ for( i = 0 ; i < 8 ; i++ )
+ pVBInfo->TimingH[ 0 ].data[ i ] = LCDPtr[ 0 ].Reg[ i ] ;
+ }
+
+ if ( pVBInfo->IF_DEF_CH7007 == 1 )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ CH7007TV_TimingHPtr = ( XGI_CH7007TV_TimingHStruct *)XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+
+ for( i = 0 ; i < 8 ; i++ )
+ pVBInfo->TimingH[ 0 ].data[ i ] = CH7007TV_TimingHPtr[ 0 ].data[ i ] ;
+ }
+ }
+
+ /* if ( pVBInfo->IF_DEF_CH7017 == 1 )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ TVPtr = ( XGI330_CHTVDataStruct *)XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+ } */
+
+ XGI_SetCRT1Timing_H(pVBInfo,HwDeviceExtension) ;
+
+ if ( pVBInfo->IF_DEF_CH7007 == 1 )
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , CH7007TV_TimingHPtr[ 0 ].data[ 8 ] ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2F , CH7007TV_TimingHPtr[ 0 ].data[ 9 ] ) ;
+ }
+
+ tempbx = 1 ;
+
+ if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+ {
+ LCDPtr1 = ( XGI_LVDSCRT1VDataStruct * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+ for( i = 0 ; i < 7 ; i++ )
+ pVBInfo->TimingV[ 0 ].data[ i ] = LCDPtr1[ 0 ].Reg[ i ] ;
+ }
+
+ if ( pVBInfo->IF_DEF_CH7007 == 1 )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ CH7007TV_TimingVPtr = ( XGI_CH7007TV_TimingVStruct *)XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+
+ for( i = 0 ; i < 7 ; i++ )
+ pVBInfo->TimingV[ 0 ].data[ i ] = CH7007TV_TimingVPtr[ 0 ].data[ i ] ;
+ }
+ }
+ /* if ( pVBInfo->IF_DEF_CH7017 == 1 )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ TVPtr = ( XGI330_CHTVDataStruct *)XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+ } */
+
+ XGI_SetCRT1Timing_V( ModeIdIndex , ModeNo , pVBInfo) ;
+
+ if ( pVBInfo->IF_DEF_CH7007 == 1 )
+ {
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x33 , ~0x01 , CH7007TV_TimingVPtr[ 0 ].data[ 7 ]&0x01 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , CH7007TV_TimingVPtr[ 0 ].data[8 ] ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x3F , CH7007TV_TimingVPtr[ 0 ].data[9 ] ) ;
+
+ }
+ }
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLVDSRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetLVDSRegs( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT tempbx , tempax , tempcx , tempdx , push1 , push2 , modeflag ;
+ unsigned long temp , temp1 , temp2 , temp3 , push3 ;
+ XGI330_LCDDataDesStruct *LCDPtr = NULL ;
+ XGI330_LCDDataDesStruct2 *LCDPtr1 = NULL ;
+
+ if ( ModeNo > 0x13 )
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+ else
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+
+ if ( !( pVBInfo->SetFlag & Win9xDOSMode ) )
+ {
+ if ( ( pVBInfo->IF_DEF_CH7017 == 0 ) || ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) )
+ {
+ if ( pVBInfo->IF_DEF_OEMUtil == 1 )
+ {
+ tempbx = 8 ;
+ LCDPtr = ( XGI330_LCDDataDesStruct * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+ }
+
+ if ( ( pVBInfo->IF_DEF_OEMUtil == 0 ) || ( LCDPtr == 0 ) )
+ {
+ tempbx = 3 ;
+ if ( pVBInfo->LCDInfo & EnableScalingLCD )
+ LCDPtr1 = ( XGI330_LCDDataDesStruct2 * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+ else
+ LCDPtr = ( XGI330_LCDDataDesStruct * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+ }
+
+ XGI_GetLCDSync( &tempax , &tempbx ,pVBInfo) ;
+ push1 = tempbx ;
+ push2 = tempax ;
+
+ /* GetLCDResInfo */
+ if ( ( pVBInfo->LCDResInfo == Panel1024x768 ) || ( pVBInfo->LCDResInfo == Panel1024x768x75 ) )
+ {
+ tempax = 1024 ;
+ tempbx = 768 ;
+ }
+ else if ( ( pVBInfo->LCDResInfo == Panel1280x1024 ) || ( pVBInfo->LCDResInfo == Panel1280x1024x75 ) )
+ {
+ tempax = 1280 ;
+ tempbx = 1024 ;
+ }
+ else if ( pVBInfo->LCDResInfo == Panel1400x1050 )
+ {
+ tempax = 1400 ;
+ tempbx = 1050 ;
+ }
+ else
+ {
+ tempax = 1600 ;
+ tempbx = 1200 ;
+ }
+
+ if ( pVBInfo->LCDInfo & SetLCDtoNonExpanding )
+ {
+ pVBInfo->HDE=tempax;
+ pVBInfo->VDE=tempbx;
+ pVBInfo->VGAHDE=tempax;
+ pVBInfo->VGAVDE=tempbx;
+ }
+
+ if ( ( pVBInfo->IF_DEF_ScaleLCD == 1 ) && ( pVBInfo->LCDInfo & EnableScalingLCD ) )
+ {
+ tempax=pVBInfo->HDE;
+ tempbx=pVBInfo->VDE;
+ }
+
+ tempax = pVBInfo->HT ;
+
+ if ( pVBInfo->LCDInfo & EnableScalingLCD )
+ tempbx = LCDPtr1->LCDHDES ;
+ else
+ tempbx = LCDPtr->LCDHDES ;
+
+ tempcx = pVBInfo->HDE ;
+ tempbx = tempbx & 0x0fff ;
+ tempcx += tempbx ;
+
+ if ( tempcx >= tempax )
+ tempcx -= tempax ;
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x1A , tempbx & 0x07 ) ;
+
+ tempcx = tempcx >> 3 ;
+ tempbx = tempbx >> 3 ;
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x16 , ( USHORT )( tempbx & 0xff ) ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x17 , ( USHORT )( tempcx & 0xff ) ) ;
+
+ tempax = pVBInfo->HT ;
+
+ if ( pVBInfo->LCDInfo & EnableScalingLCD )
+ tempbx = LCDPtr1->LCDHRS ;
+ else
+ tempbx = LCDPtr->LCDHRS ;
+
+ tempcx = push2 ;
+
+ if ( pVBInfo->LCDInfo & EnableScalingLCD )
+ tempcx = LCDPtr1->LCDHSync ;
+
+ tempcx += tempbx ;
+
+ if ( tempcx >= tempax )
+ tempcx -= tempax ;
+
+ tempax = tempbx & 0x07 ;
+ tempax = tempax >> 5 ;
+ tempcx = tempcx >> 3 ;
+ tempbx = tempbx >> 3 ;
+
+ tempcx &= 0x1f ;
+ tempax |= tempcx ;
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x15 , tempax ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x14 , ( USHORT )( tempbx & 0xff ) ) ;
+
+ tempax = pVBInfo->VT ;
+ if ( pVBInfo->LCDInfo & EnableScalingLCD )
+ tempbx = LCDPtr1->LCDVDES ;
+ else
+ tempbx = LCDPtr->LCDVDES ;
+ tempcx = pVBInfo->VDE ;
+
+ tempbx = tempbx & 0x0fff ;
+ tempcx += tempbx ;
+ if ( tempcx >= tempax )
+ tempcx -= tempax ;
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x1b , ( USHORT )( tempbx & 0xff ) ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x1c , ( USHORT )( tempcx & 0xff ) ) ;
+
+ tempbx = ( tempbx >> 8 ) & 0x07 ;
+ tempcx = ( tempcx >> 8 ) & 0x07 ;
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x1d , ( USHORT )( ( tempcx << 3 ) | tempbx ) ) ;
+
+ tempax = pVBInfo->VT ;
+ if ( pVBInfo->LCDInfo & EnableScalingLCD )
+ tempbx = LCDPtr1->LCDVRS ;
+ else
+ tempbx = LCDPtr->LCDVRS ;
+
+ /* tempbx = tempbx >> 4 ; */
+ tempcx = push1 ;
+
+ if ( pVBInfo->LCDInfo & EnableScalingLCD )
+ tempcx = LCDPtr1->LCDVSync ;
+
+ tempcx += tempbx ;
+ if ( tempcx >= tempax )
+ tempcx -= tempax ;
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x18 , ( USHORT )( tempbx & 0xff ) ) ;
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x19 , ~0x0f , ( USHORT )( tempcx & 0x0f ) ) ;
+
+ tempax = ( ( tempbx >> 8 ) & 0x07 ) << 3 ;
+
+ tempbx = pVBInfo->VGAVDE ;
+ if ( tempbx != pVBInfo->VDE )
+ tempax |= 0x40 ;
+
+ if ( pVBInfo->LCDInfo & EnableLVDSDDA )
+ tempax |= 0x40 ;
+
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x1a , 0x07 , tempax ) ;
+
+ tempcx = pVBInfo->VGAVT ;
+ tempbx = pVBInfo->VDE ;
+ tempax = pVBInfo->VGAVDE ;
+ tempcx -= tempax ;
+
+ temp = tempax ; /* 0430 ylshieh */
+ temp1 = ( temp << 18 ) / tempbx ;
+
+ tempdx = ( USHORT )( ( temp << 18 ) % tempbx ) ;
+
+ if ( tempdx != 0 )
+ temp1 += 1 ;
+
+ temp2 = temp1 ;
+ push3 = temp2 ;
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x37 , ( USHORT )( temp2 & 0xff ) ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x36 , ( USHORT )( ( temp2 >> 8 ) & 0xff ) ) ;
+
+ tempbx = ( USHORT )( temp2 >> 16 ) ;
+ tempax = tempbx & 0x03 ;
+
+ tempbx = pVBInfo->VGAVDE ;
+ if ( tempbx == pVBInfo->VDE )
+ tempax |= 0x04 ;
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x35 , tempax ) ;
+
+ if ( pVBInfo->VBType & VB_XGI301C )
+ {
+ temp2 = push3 ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x3c , ( USHORT )( temp2 & 0xff ) ) ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x3b , ( USHORT )( ( temp2 >> 8 ) & 0xff ) ) ;
+ tempbx = ( USHORT )( temp2 >> 16 ) ;
+ XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x3a , ~0xc0 , ( USHORT )( ( tempbx & 0xff ) << 6 ) ) ;
+
+ tempcx = pVBInfo->VGAVDE ;
+ if ( tempcx == pVBInfo->VDE )
+ XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x30 , ~0x0c , 0x00 ) ;
+ else
+ XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x30 , ~0x0c , 0x08 ) ;
+ }
+
+ tempcx = pVBInfo->VGAHDE ;
+ tempbx = pVBInfo->HDE ;
+
+ temp1 = tempcx << 16 ;
+
+ tempax = ( USHORT )( temp1 / tempbx ) ;
+
+ if ( ( tempbx & 0xffff ) == ( tempcx & 0xffff ) )
+ tempax = 65535 ;
+
+ temp3 = tempax ;
+ temp1 = pVBInfo->VGAHDE << 16 ;
+
+ temp1 /= temp3 ;
+ temp3 = temp3 << 16 ;
+ temp1 -= 1 ;
+
+ temp3 = ( temp3 & 0xffff0000 ) + ( temp1 & 0xffff ) ;
+
+ tempax = ( USHORT )( temp3 & 0xff ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x1f , tempax ) ;
+
+ temp1 = pVBInfo->VGAVDE << 18 ;
+ temp1 = temp1 / push3 ;
+ tempbx = ( USHORT )( temp1 & 0xffff ) ;
+
+ if ( pVBInfo->LCDResInfo == Panel1024x768 )
+ tempbx -= 1 ;
+
+ tempax = ( ( tempbx >> 8 ) & 0xff ) << 3 ;
+ tempax |= ( USHORT )( ( temp3 >> 8 ) & 0x07 ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x20 , ( USHORT )( tempax & 0xff ) ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x21 , ( USHORT )( tempbx & 0xff ) ) ;
+
+ temp3 = temp3 >> 16 ;
+
+ if ( modeflag & HalfDCLK )
+ temp3 = temp3 >> 1 ;
+
+ XGINew_SetReg1(pVBInfo->Part1Port , 0x22 , ( USHORT )( ( temp3 >> 8 ) & 0xff ) ) ;
+ XGINew_SetReg1(pVBInfo->Part1Port , 0x23 , ( USHORT )( temp3 & 0xff ) ) ;
+ }
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT2ECLK */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT2ECLK( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ UCHAR di_0 , di_1 , tempal ;
+ int i ;
+
+ tempal = XGI_GetVCLKPtr( RefreshRateTableIndex , ModeNo , ModeIdIndex, pVBInfo ) ;
+ XGI_GetVCLKLen( tempal , &di_0 , &di_1, pVBInfo ) ;
+ XGI_GetLCDVCLKPtr( &di_0 , &di_1, pVBInfo ) ;
+
+ for( i = 0 ; i < 4 ; i++ )
+ {
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x31 , ~0x30 , ( USHORT )( 0x10 * i ) ) ;
+ if ( pVBInfo->IF_DEF_CH7007 == 1 )
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2b , di_0 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2c , di_1 ) ;
+ }
+ else if ( ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) ) && ( !( pVBInfo->VBInfo & SetInSlaveMode ) ) )
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2e , di_0 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2f , di_1 ) ;
+ }
+ else
+ {
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2b , di_0 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2c , di_1 ) ;
+ }
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_UpdateModeInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_UpdateModeInfo( PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT tempcl ,
+ tempch ,
+ temp ,
+ tempbl ,
+ tempax ;
+
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ tempcl = 0 ;
+ tempch = 0 ;
+ temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x01 ) ;
+
+ if ( !( temp & 0x20 ) )
+ {
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x17 ) ;
+ if ( temp & 0x80 )
+ {
+ if ( ( HwDeviceExtension->jChipType >= XG20 ) || ( HwDeviceExtension->jChipType >= XG40 ) )
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x53 ) ;
+ else
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x63 ) ;
+
+ if ( !( temp & 0x40 ) )
+ tempcl |= ActiveCRT1 ;
+ }
+ }
+
+ temp = XGINew_GetReg1( pVBInfo->Part1Port , 0x2e ) ;
+ temp &= 0x0f ;
+
+ if ( !( temp == 0x08 ) )
+ {
+ tempax = XGINew_GetReg1( pVBInfo->Part1Port , 0x13 ) ; /* Check ChannelA by Part1_13 [2003/10/03] */
+ if ( tempax & 0x04 )
+ tempcl = tempcl | ActiveLCD ;
+
+ temp &= 0x05 ;
+
+ if ( !( tempcl & ActiveLCD ) )
+ if ( temp == 0x01 )
+ tempcl |= ActiveCRT2 ;
+
+ if ( temp == 0x04 )
+ tempcl |= ActiveLCD ;
+
+ if ( temp == 0x05 )
+ {
+ temp = XGINew_GetReg1( pVBInfo->Part2Port , 0x00 ) ;
+
+ if( !( temp & 0x08 ) )
+ tempch |= ActiveAVideo ;
+
+ if ( !( temp & 0x04 ) )
+ tempch |= ActiveSVideo ;
+
+ if ( temp & 0x02 )
+ tempch |= ActiveSCART ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+ {
+ if ( temp & 0x01 )
+ tempch |= ActiveHiTV ;
+ }
+
+ if ( pVBInfo->VBInfo & SetCRT2ToYPbPr )
+ {
+ temp = XGINew_GetReg1( pVBInfo->Part2Port , 0x4d ) ;
+
+ if ( temp & 0x10 )
+ tempch |= ActiveYPbPr ;
+ }
+
+ if ( tempch != 0 )
+ tempcl |= ActiveTV ;
+ }
+ }
+
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x3d ) ;
+ if ( tempcl & ActiveLCD )
+ {
+ if ( ( pVBInfo->SetFlag & ReserveTVOption ) )
+ {
+ if ( temp & ActiveTV )
+ tempcl |= ActiveTV ;
+ }
+ }
+ temp = tempcl ;
+ tempbl = ~ModeSwitchStatus ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x3d , tempbl , temp ) ;
+
+ if ( !( pVBInfo->SetFlag & ReserveTVOption ) )
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x3e , tempch ) ;
+ }
+ else
+ {
+ return ;
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVGAType */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetVGAType( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+ /*
+ if ( HwDeviceExtension->jChipType >= XG20 )
+ {
+ pVBInfo->Set_VGAType = XG20;
+ }
+ else if ( HwDeviceExtension->jChipType >= XG40 )
+ {
+ pVBInfo->Set_VGAType = VGA_XGI340 ;
+ }
+ */
+ pVBInfo->Set_VGAType = HwDeviceExtension->jChipType;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVBType */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetVBType(PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT flag , tempbx , tempah ;
+
+ if ( pVBInfo->IF_DEF_CH7007 == 1 )
+ {
+ pVBInfo->VBType = VB_CH7007 ;
+ return;
+ }
+ if ( pVBInfo->IF_DEF_LVDS == 0 )
+ {
+ tempbx = VB_XGI302B ;
+ flag = XGINew_GetReg1( pVBInfo->Part4Port , 0x00 ) ;
+ if ( flag != 0x02 )
+ {
+ tempbx = VB_XGI301 ;
+ flag = XGINew_GetReg1( pVBInfo->Part4Port , 0x01 ) ;
+ if ( flag >= 0xB0 )
+ {
+ tempbx = VB_XGI301B ;
+ if ( flag >= 0xC0 )
+ {
+ tempbx = VB_XGI301C ;
+ if ( flag >= 0xD0 )
+ {
+ tempbx = VB_XGI301LV ;
+ if ( flag >= 0xE0 )
+ {
+ tempbx = VB_XGI302LV ;
+ tempah = XGINew_GetReg1( pVBInfo->Part4Port , 0x39 ) ;
+ if ( tempah != 0xFF )
+ tempbx = VB_XGI301C ;
+ }
+ }
+ }
+
+ if ( tempbx & ( VB_XGI301B | VB_XGI302B ) )
+ {
+ flag = XGINew_GetReg1( pVBInfo->Part4Port , 0x23 ) ;
+
+ if ( !( flag & 0x02 ) )
+ tempbx = tempbx | VB_NoLCD ;
+ }
+ }
+ }
+ pVBInfo->VBType = tempbx ;
+ }
+/*
+ else if ( pVBInfo->IF_DEF_CH7017 == 1 )
+ pVBInfo->VBType = VB_CH7017 ;
+ else //LVDS
+ pVBInfo->VBType = VB_LVDS_NS ;
+*/
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVBInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetVBInfo( USHORT ModeNo , USHORT ModeIdIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT tempax ,
+ push ,
+ tempbx ,
+ temp ,
+ modeflag ;
+
+ if ( ModeNo <= 0x13 )
+ {
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+ }
+ else
+ {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+ }
+
+ pVBInfo->SetFlag = 0 ;
+ pVBInfo->ModeType = modeflag & ModeInfoFlag ;
+ tempbx = 0 ;
+
+ if ( pVBInfo->VBType & 0xFFFF )
+ {
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x30 ) ; /* Check Display Device */
+ tempbx = tempbx | temp ;
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x31 ) ;
+ push = temp ;
+ push = push << 8 ;
+ tempax = temp << 8 ;
+ tempbx = tempbx | tempax ;
+ temp = ( SetCRT2ToDualEdge | SetCRT2ToYPbPr | SetCRT2ToLCDA | SetInSlaveMode | DisableCRT2Display ) ;
+ temp = 0xFFFF ^ temp ;
+ tempbx &= temp ;
+
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+
+ if ( pVBInfo->IF_DEF_LCDA == 1 )
+ {
+
+ if ( ( pVBInfo->Set_VGAType >= XG20 ) || ( pVBInfo->Set_VGAType >= XG40 ))
+ {
+ if ( pVBInfo->IF_DEF_LVDS == 0 )
+ {
+ /* if ( ( pVBInfo->VBType & VB_XGI302B ) || ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) || ( pVBInfo->VBType & VB_XGI301C ) ) */
+ if ( pVBInfo->VBType & ( VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ if ( temp & EnableDualEdge )
+ {
+ tempbx |= SetCRT2ToDualEdge ;
+
+ if ( temp & SetToLCDA )
+ tempbx |= SetCRT2ToLCDA ;
+ }
+ }
+ }
+ else if ( pVBInfo->IF_DEF_CH7017 == 1 )
+ {
+ if ( pVBInfo->VBType & VB_CH7017 )
+ {
+ if ( temp & EnableDualEdge )
+ {
+ tempbx |= SetCRT2ToDualEdge ;
+
+ if ( temp & SetToLCDA )
+ tempbx |= SetCRT2ToLCDA ;
+ }
+ }
+ }
+ }
+ }
+
+ if ( pVBInfo->IF_DEF_YPbPr == 1 )
+ {
+ if ( ( ( pVBInfo->IF_DEF_LVDS == 0 ) && ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) || ( pVBInfo->VBType & VB_XGI301C ) ) )
+ || ( ( pVBInfo->IF_DEF_CH7017 == 1 ) && ( pVBInfo->VBType&VB_CH7017 ) ) || ( (pVBInfo->IF_DEF_CH7007 == 1) && (pVBInfo->VBType&VB_CH7007) ) ) /* [Billy] 07/05/04 */
+ {
+ if ( temp & SetYPbPr ) /* temp = CR38 */
+ {
+ if ( pVBInfo->IF_DEF_HiVision == 1 )
+ {
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x35 ) ; /* shampoo add for new scratch */
+ temp &= YPbPrMode ;
+ tempbx |= SetCRT2ToHiVisionTV ;
+
+ if ( temp != YPbPrMode1080i ) {
+ tempbx &= ( ~SetCRT2ToHiVisionTV ) ;
+ tempbx |= SetCRT2ToYPbPr ; }
+ }
+
+ /* tempbx |= SetCRT2ToYPbPr ; */
+ }
+ }
+ }
+
+ tempax = push ; /* restore CR31 */
+
+ if ( pVBInfo->IF_DEF_LVDS == 0 )
+ {
+ if ( pVBInfo->IF_DEF_YPbPr == 1 )
+ {
+ if ( pVBInfo->IF_DEF_HiVision == 1 )
+ temp = 0x09FC ;
+ else
+ temp = 0x097C ;
+ }
+ else
+ {
+ if ( pVBInfo->IF_DEF_HiVision == 1 )
+ temp = 0x01FC ;
+ else
+ temp = 0x017C ;
+ }
+ }
+ else /* 3nd party chip */
+ {
+ if ( pVBInfo->IF_DEF_CH7017 == 1 )
+ temp = ( SetCRT2ToTV | SetCRT2ToLCD | SetCRT2ToLCDA ) ;
+ else if ( pVBInfo->IF_DEF_CH7007 == 1 ) /* [Billy] 07/05/03 */
+ {
+ temp = SetCRT2ToTV ;
+ }
+ else
+ temp = SetCRT2ToLCD ;
+ }
+
+ if ( !( tempbx & temp ) )
+ {
+ tempax |= DisableCRT2Display ;
+ tempbx = 0 ;
+ }
+
+ if ( pVBInfo->IF_DEF_LCDA == 1 ) /* Select Display Device */
+ {
+ if ( !( pVBInfo->VBType & VB_NoLCD ) )
+ {
+ if ( tempbx & SetCRT2ToLCDA )
+ {
+ if ( tempbx & SetSimuScanMode )
+ tempbx &= ( ~( SetCRT2ToLCD | SetCRT2ToRAMDAC | SwitchToCRT2 ) ) ;
+ else
+ tempbx &= ( ~( SetCRT2ToLCD | SetCRT2ToRAMDAC | SetCRT2ToTV | SwitchToCRT2 ) ) ;
+ }
+ }
+ }
+
+ /* shampoo add */
+ if ( !( tempbx & ( SwitchToCRT2 | SetSimuScanMode ) ) ) /* for driver abnormal */
+ {
+ if ( pVBInfo->IF_DEF_CRT2Monitor == 1 )
+ {
+ if ( tempbx & SetCRT2ToRAMDAC )
+ {
+ tempbx &= ( 0xFF00 | SetCRT2ToRAMDAC | SwitchToCRT2 | SetSimuScanMode ) ;
+ tempbx &= ( 0x00FF | ( ~SetCRT2ToYPbPr ) ) ;
+ }
+ }
+ else
+ tempbx &= ( ~( SetCRT2ToRAMDAC | SetCRT2ToLCD | SetCRT2ToTV ) ) ;
+ }
+
+ if ( !( pVBInfo->VBType & VB_NoLCD ) )
+ {
+ if ( tempbx & SetCRT2ToLCD )
+ {
+ tempbx &= ( 0xFF00 | SetCRT2ToLCD | SwitchToCRT2 | SetSimuScanMode ) ;
+ tempbx &= ( 0x00FF | ( ~SetCRT2ToYPbPr ) ) ;
+ }
+ }
+
+ if ( tempbx & SetCRT2ToSCART )
+ {
+ tempbx &= ( 0xFF00 | SetCRT2ToSCART | SwitchToCRT2 | SetSimuScanMode ) ;
+ tempbx &= ( 0x00FF | ( ~SetCRT2ToYPbPr ) ) ;
+ }
+
+ if ( pVBInfo->IF_DEF_YPbPr == 1 )
+ {
+ if ( tempbx & SetCRT2ToYPbPr )
+ tempbx &= ( 0xFF00 | SwitchToCRT2 | SetSimuScanMode ) ;
+ }
+
+ if ( pVBInfo->IF_DEF_HiVision == 1 )
+ {
+ if ( tempbx & SetCRT2ToHiVisionTV )
+ tempbx &= ( 0xFF00 | SetCRT2ToHiVisionTV | SwitchToCRT2 | SetSimuScanMode ) ;
+ }
+
+ if ( tempax & DisableCRT2Display ) /* Set Display Device Info */
+ {
+ if ( !( tempbx & ( SwitchToCRT2 | SetSimuScanMode ) ) )
+ tempbx = DisableCRT2Display ;
+ }
+
+ if ( !( tempbx & DisableCRT2Display ) )
+ {
+ if ( ( !( tempbx & DriverMode ) ) || ( !( modeflag & CRT2Mode ) ) )
+ {
+ if ( pVBInfo->IF_DEF_LCDA == 1 )
+ {
+ if ( !( tempbx & SetCRT2ToLCDA ) )
+ tempbx |= ( SetInSlaveMode | SetSimuScanMode ) ;
+ }
+
+ if ( pVBInfo->IF_DEF_VideoCapture == 1 )
+ {
+ if ( ( ( HwDeviceExtension->jChipType == XG40 ) && ( pVBInfo->Set_VGAType == XG40 ) )
+ || ( ( HwDeviceExtension->jChipType == XG41 ) && ( pVBInfo->Set_VGAType == XG41 ) )
+ || ( ( HwDeviceExtension->jChipType == XG42 ) && ( pVBInfo->Set_VGAType == XG42 ) )
+ || ( ( HwDeviceExtension->jChipType == XG45 ) && ( pVBInfo->Set_VGAType == XG45 ) ) )
+ {
+ if ( ModeNo <= 13 )
+ {
+ if ( !( tempbx & SetCRT2ToRAMDAC ) ) /*CRT2 not need to support*/
+ {
+ tempbx &= ( 0x00FF | ( ~SetInSlaveMode ) ) ;
+ pVBInfo->SetFlag |= EnableVCMode ;
+ }
+ }
+ }
+ }
+ }
+
+ /*LCD+TV can't support in slave mode (Force LCDA+TV->LCDB)*/
+ if ( ( tempbx & SetInSlaveMode ) && ( tempbx & SetCRT2ToLCDA ) )
+ {
+ tempbx ^= ( SetCRT2ToLCD | SetCRT2ToLCDA | SetCRT2ToDualEdge ) ;
+ pVBInfo->SetFlag |= ReserveTVOption ;
+ }
+ }
+ }
+
+ pVBInfo->VBInfo = tempbx ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetTVInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetTVInfo( USHORT ModeNo , USHORT ModeIdIndex ,PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT temp ,
+ tempbx = 0 ,
+ resinfo = 0 ,
+ modeflag ,
+ index1 ;
+
+ tempbx = 0 ;
+ resinfo = 0 ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ if ( ModeNo <= 0x13 )
+ {
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ; /* si+St_ModeFlag */
+ resinfo = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ; /* si+St_ResInfo */
+ }
+ else
+ {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+ resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ; /* si+Ext_ResInfo */
+ }
+
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x35 ) ;
+ tempbx = temp;
+ if ( tempbx & SetPALTV )
+ {
+ tempbx &= ( SetCHTVOverScan | SetPALMTV | SetPALNTV | SetPALTV ) ;
+ if ( tempbx & SetPALMTV )
+ tempbx &= ~SetPALTV ; /* set to NTSC if PAL-M */
+ }
+ else
+ tempbx &= ( SetCHTVOverScan | SetNTSCJ | SetPALTV ) ;
+/*
+ if ( pVBInfo->IF_DEF_LVDS == 0 )
+ {
+ index1 = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ; //PAL-M/PAL-N Info
+ temp2 = ( index1 & 0xC0 ) >> 5 ; //00:PAL, 01:PAL-M, 10:PAL-N
+ tempbx |= temp2 ;
+ if ( temp2 & 0x02 ) //PAL-M
+ tempbx &= ( ~SetPALTV ) ;
+ }
+*/
+ }
+
+ if ( pVBInfo->IF_DEF_CH7017 == 1 )
+ {
+ tempbx = XGINew_GetReg1( pVBInfo->P3d4 , 0x35 ) ;
+
+ if ( tempbx & TVOverScan )
+ tempbx |= SetCHTVOverScan ;
+ }
+
+ if ( pVBInfo->IF_DEF_CH7007 == 1 ) /* [Billy] 07/05/04 */
+ {
+ tempbx = XGINew_GetReg1( pVBInfo->P3d4 , 0x35 ) ;
+
+ if ( tempbx & TVOverScan )
+ {
+ tempbx |= SetCHTVOverScan ;
+ }
+ }
+
+
+ if ( pVBInfo->IF_DEF_LVDS == 0 )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToSCART )
+ tempbx |= SetPALTV ;
+ }
+
+ if ( pVBInfo->IF_DEF_YPbPr == 1 )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToYPbPr )
+ {
+ index1 = XGINew_GetReg1( pVBInfo->P3d4 , 0x35 ) ;
+ index1 &= YPbPrMode ;
+
+ if ( index1 == YPbPrMode525i )
+ tempbx |= SetYPbPrMode525i ;
+
+ if ( index1 == YPbPrMode525p )
+ tempbx = tempbx | SetYPbPrMode525p;
+ if ( index1 == YPbPrMode750p)
+ tempbx = tempbx | SetYPbPrMode750p;
+ }
+ }
+
+ if ( pVBInfo->IF_DEF_HiVision == 1 )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+ {
+ tempbx = tempbx | SetYPbPrMode1080i | SetPALTV ;
+ }
+ }
+
+ if ( pVBInfo->IF_DEF_LVDS == 0 )
+ { /* shampoo */
+ if ( ( pVBInfo->VBInfo & SetInSlaveMode ) && ( !( pVBInfo->VBInfo & SetNotSimuMode ) ) )
+ tempbx |= TVSimuMode ;
+
+ if ( !( tempbx & SetPALTV ) && ( modeflag > 13 ) && ( resinfo == 8 ) ) /* NTSC 1024x768, */
+ tempbx |= NTSC1024x768 ;
+
+ tempbx |= RPLLDIV2XO ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+ {
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ tempbx &=( ~RPLLDIV2XO ) ;
+ }
+ else
+ {
+ if ( tempbx & ( SetYPbPrMode525p | SetYPbPrMode750p ) )
+ tempbx &= ( ~RPLLDIV2XO ) ;
+ else if ( !( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) ) )
+ {
+ if ( tempbx & TVSimuMode )
+ tempbx &= ( ~RPLLDIV2XO ) ;
+ }
+ }
+ }
+ }
+ pVBInfo->TVInfo = tempbx ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLCDInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_GetLCDInfo( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT temp ,
+ tempax ,
+ tempbx ,
+ modeflag ,
+ resinfo = 0 ,
+ LCDIdIndex ;
+
+ pVBInfo->LCDResInfo = 0 ;
+ pVBInfo->LCDTypeInfo = 0 ;
+ pVBInfo->LCDInfo = 0 ;
+
+ if ( ModeNo <= 0x13 )
+ {
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ; /* si+St_ModeFlag // */
+ }
+ else
+ {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+ resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ; /* si+Ext_ResInfo// */
+ }
+
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x36 ) ; /* Get LCD Res.Info */
+ tempbx = temp & 0x0F ;
+
+ if ( tempbx == 0 )
+ tempbx = Panel1024x768 ; /* default */
+
+ /* LCD75 [2003/8/22] Vicent */
+ if ( ( tempbx == Panel1024x768 ) || ( tempbx == Panel1280x1024 ) )
+ {
+ if ( pVBInfo->VBInfo & DriverMode )
+ {
+ tempax = XGINew_GetReg1( pVBInfo->P3d4 , 0x33 ) ;
+ if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+ tempax &= 0x0F ;
+ else
+ tempax = tempax >> 4 ;
+
+ if ( ( resinfo == 6 ) || ( resinfo == 9 ) )
+ {
+ if ( tempax >= 3 )
+ tempbx |= PanelRef75Hz ;
+ }
+ else if ( ( resinfo == 7 ) || ( resinfo == 8 ) )
+ {
+ if ( tempax >= 4 )
+ tempbx |= PanelRef75Hz ;
+ }
+ }
+ }
+
+ pVBInfo->LCDResInfo = tempbx ;
+
+ /* End of LCD75 */
+
+ if( pVBInfo->IF_DEF_OEMUtil == 1 )
+ {
+ pVBInfo->LCDTypeInfo = ( temp & 0xf0 ) >> 4 ;
+ }
+
+ if ( !( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) )
+ {
+ return 0;
+ }
+
+ tempbx = 0 ;
+
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x37 ) ;
+
+ temp &= ( ScalingLCD | LCDNonExpanding | LCDSyncBit | SetPWDEnable ) ;
+
+ if ( ( pVBInfo->IF_DEF_ScaleLCD == 1 ) && ( temp & LCDNonExpanding ) )
+ temp &= ~EnableScalingLCD ;
+
+ tempbx |= temp ;
+
+ LCDIdIndex = XGI_GetLCDCapPtr1(pVBInfo) ;
+
+ tempax = pVBInfo->LCDCapList[ LCDIdIndex ].LCD_Capability ;
+
+ if ( pVBInfo->IF_DEF_LVDS == 0 ) /* shampoo */
+ {
+ if ( ( ( pVBInfo->VBType & VB_XGI302LV ) || ( pVBInfo->VBType & VB_XGI301C ) ) && ( tempax & LCDDualLink ) )
+ {
+ tempbx |= SetLCDDualLink ;
+ }
+ }
+
+ if ( pVBInfo->IF_DEF_CH7017 == 1 )
+ {
+ if ( tempax & LCDDualLink )
+ {
+ tempbx |= SetLCDDualLink ;
+ }
+ }
+
+ if ( pVBInfo->IF_DEF_LVDS == 0 )
+ {
+ if ( ( pVBInfo->LCDResInfo == Panel1400x1050 ) && ( pVBInfo->VBInfo & SetCRT2ToLCD ) && ( ModeNo > 0x13 ) && ( resinfo == 9 ) && ( !( tempbx & EnableScalingLCD ) ) )
+ tempbx |= SetLCDtoNonExpanding ; /* set to center in 1280x1024 LCDB for Panel1400x1050 */
+ }
+
+/*
+ if ( tempax & LCDBToA )
+ {
+ tempbx |= SetLCDBToA ;
+ }
+*/
+
+ if ( pVBInfo->IF_DEF_ExpLink == 1 )
+ {
+ if ( modeflag & HalfDCLK )
+ {
+ /* if ( !( pVBInfo->LCDInfo&LCDNonExpanding ) ) */
+ if ( !( tempbx & SetLCDtoNonExpanding ) )
+ {
+ tempbx |= EnableLVDSDDA ;
+ }
+ else
+ {
+ if ( ModeNo > 0x13 )
+ {
+ if ( pVBInfo->LCDResInfo == Panel1024x768 )
+ {
+ if ( resinfo == 4 )
+ { /* 512x384 */
+ tempbx |= EnableLVDSDDA ;
+ }
+ }
+ }
+ }
+ }
+ }
+
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ {
+ if ( pVBInfo->VBInfo & SetNotSimuMode )
+ {
+ tempbx |= LCDVESATiming ;
+ }
+ }
+ else
+ {
+ tempbx |= LCDVESATiming ;
+ }
+
+ pVBInfo->LCDInfo = tempbx ;
+
+ if ( pVBInfo->IF_DEF_PWD == 1 )
+ {
+ if ( pVBInfo->LCDInfo & SetPWDEnable )
+ {
+ if ( ( pVBInfo->VBType & VB_XGI302LV ) || ( pVBInfo->VBType & VB_XGI301C ) )
+ {
+ if ( !( tempax & PWDEnable ) )
+ {
+ pVBInfo->LCDInfo &= ~SetPWDEnable ;
+ }
+ }
+ }
+ }
+
+ if ( pVBInfo->IF_DEF_LVDS == 0 )
+ {
+ if ( tempax & ( LockLCDBToA | StLCDBToA ) )
+ {
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ {
+ if ( !( tempax & LockLCDBToA ) )
+ {
+ if ( ModeNo <= 0x13 )
+ {
+ pVBInfo->VBInfo &= ~( SetSimuScanMode | SetInSlaveMode | SetCRT2ToLCD ) ;
+ pVBInfo->VBInfo |= SetCRT2ToLCDA | SetCRT2ToDualEdge ;
+ }
+ }
+ }
+ }
+ }
+
+/*
+ if ( pVBInfo->IF_DEF_LVDS == 0 )
+ {
+ if ( tempax & ( LockLCDBToA | StLCDBToA ) )
+ {
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ {
+ if ( !( ( !( tempax & LockLCDBToA ) ) && ( ModeNo > 0x13 ) ) )
+ {
+ pVBInfo->VBInfo&=~(SetSimuScanMode|SetInSlaveMode|SetCRT2ToLCD);
+ pVBInfo->VBInfo|=SetCRT2ToLCDA|SetCRT2ToDualEdge;
+ }
+ }
+ }
+ }
+*/
+
+ return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SearchModeID */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_SearchModeID( USHORT ModeNo , USHORT *ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+
+#ifdef TC
+
+ if ( ModeNo <= 5 )
+ ModeNo |= 1 ;
+
+ if ( ModeNo <= 0x13 )
+ {
+ /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->SModeIDTable)/sizeof(XGI_StStruct);(*ModeIdIndex)++) */
+ for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
+ {
+ if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == ModeNo )
+ break ;
+ if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == 0xFF )
+ return( FALSE ) ;
+ }
+
+ VGA_INFO = ( PUCHAR )MK_FP( 0 , 0x489 ) ;
+
+ if ( ModeNo == 0x07 )
+ {
+ if ( ( *VGA_INFO & 0x10 ) != 0 )
+ ( *ModeIdIndex )++ ; /* 400 lines */
+ /* else 350 lines */
+ }
+
+ if ( ModeNo <= 3 )
+ {
+ if ( ( *VGA_INFO & 0x80 ) == 0 )
+ {
+ ( *ModeIdIndex )++ ;
+ if ( ( *VGA_INFO & 0x10 ) != 0 )
+ ( *ModeIdIndex )++ ; /* 400 lines */
+ /* else 350 lines */
+ }
+ /* else 200 lines */
+ }
+ }
+ else
+ {
+ /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->EModeIDTable)/sizeof(XGI_ExtStruct);(*ModeIdIndex)++) */
+ for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
+ {
+ if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == ModeNo )
+ break ;
+ if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == 0xFF )
+ return( FALSE ) ;
+ }
+ }
+
+
+#endif
+
+#ifdef WIN2000
+
+ if ( ModeNo <= 5 )
+ ModeNo |= 1 ;
+ if ( ModeNo <= 0x13 )
+ {
+ /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->SModeIDTable)/sizeof(XGI_StStruct);(*ModeIdIndex)++) */
+ for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
+ {
+ if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == ModeNo )
+ break ;
+ if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == 0xFF )
+ return( FALSE ) ;
+ }
+
+ if ( ModeNo == 0x07 )
+ ( *ModeIdIndex )++ ; /* 400 lines */
+
+ if ( ModeNo <=3 )
+ ( *ModeIdIndex ) += 2 ; /* 400 lines */
+ /* else 350 lines */
+ }
+ else
+ {
+ /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->EModeIDTable)/sizeof(XGI_ExtStruct);(*ModeIdIndex)++) */
+ for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
+ {
+ if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == ModeNo )
+ break ;
+ if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == 0xFF )
+ return( FALSE ) ;
+ }
+ }
+
+#endif
+
+#ifdef LINUX /* chiawen for linux solution */
+
+ if ( ModeNo <= 5 )
+ ModeNo |= 1 ;
+ if ( ModeNo <= 0x13 )
+ {
+ /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->SModeIDTable)/sizeof(XGI_StStruct);(*ModeIdIndex)++) */
+ for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
+ {
+ if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == ModeNo )
+ break ;
+ if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == 0xFF )
+ return( FALSE ) ;
+ }
+
+ if ( ModeNo == 0x07 )
+ ( *ModeIdIndex )++ ; /* 400 lines */
+
+ if ( ModeNo <= 3 )
+ ( *ModeIdIndex ) += 2 ; /* 400 lines */
+ /* else 350 lines */
+ }
+ else
+ {
+ /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->EModeIDTable)/sizeof(XGI_ExtStruct);(*ModeIdIndex)++) */
+ for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
+ {
+ if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == ModeNo )
+ break ;
+ if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == 0xFF )
+ return( FALSE ) ;
+ }
+ }
+
+#endif
+
+ return( TRUE ) ;
+}
+
+
+
+
+/* win2000 MM adapter not support standard mode! */
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGINew_CheckMemorySize(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT memorysize ,
+ modeflag ,
+ temp ,
+ temp1 ,
+ tmp ;
+
+/* if ( ( HwDeviceExtension->jChipType == XGI_650 ) ||
+ ( HwDeviceExtension->jChipType == XGI_650M ) )
+ {
+ return( TRUE ) ;
+ } */
+
+ if ( ModeNo <= 0x13 )
+ {
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+ }
+ else {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+ }
+
+ /* ModeType = modeflag&ModeInfoFlag ; // Get mode type */
+
+ memorysize = modeflag & MemoryInfoFlag ;
+ memorysize = memorysize > MemorySizeShift ;
+ memorysize++ ; /* Get memory size */
+
+ temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) ; /* Get DRAM Size */
+ tmp = temp ;
+
+ if ( HwDeviceExtension->jChipType == XG40 )
+ {
+ temp = 1 << ( ( temp & 0x0F0 ) >> 4 ) ; /* memory size per channel SR14[7:4] */
+ if ( ( tmp & 0x0c ) == 0x0C ) /* Qual channels */
+ {
+ temp <<= 2 ;
+ }
+ else if ( ( tmp & 0x0c ) == 0x08 ) /* Dual channels */
+ {
+ temp <<= 1 ;
+ }
+ }
+ else if ( HwDeviceExtension->jChipType == XG42 )
+ {
+ temp = 1 << ( ( temp & 0x0F0 ) >> 4 ) ; /* memory size per channel SR14[7:4] */
+ if ( ( tmp & 0x04 ) == 0x04 ) /* Dual channels */
+ {
+ temp <<= 1 ;
+ }
+ }
+ else if ( HwDeviceExtension->jChipType == XG45 )
+ {
+ temp = 1 << ( ( temp & 0x0F0 ) >> 4 ) ; /* memory size per channel SR14[7:4] */
+ if ( ( tmp & 0x0c ) == 0x0C ) /* Qual channels */
+ {
+ temp <<= 2 ;
+ }
+ else if ( ( tmp & 0x0c ) == 0x08 ) /* triple channels */
+ {
+ temp1 = temp ;
+ temp <<= 1 ;
+ temp += temp1 ;
+ }
+ else if ( ( tmp & 0x0c ) == 0x04 ) /* Dual channels */
+ {
+ temp <<= 1 ;
+ }
+ }
+ if ( temp < memorysize )
+ return( FALSE ) ;
+ else
+ return( TRUE ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_IsLowResolution */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+/*void XGINew_IsLowResolution( USHORT ModeNo , USHORT ModeIdIndex, BOOLEAN XGINew_CheckMemorySize(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT data ;
+ USHORT ModeFlag ;
+
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x0F ) ;
+ data &= 0x7F ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x0F , data ) ;
+
+ if ( ModeNo > 0x13 )
+ {
+ ModeFlag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+ if ( ( ModeFlag & HalfDCLK ) && ( ModeFlag & DoubleScanMode ) )
+ {
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x0F ) ;
+ data |= 0x80 ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x0F , data ) ;
+ data = XGINew_GetReg1( pVBInfo->P3c4 , 0x01 ) ;
+ data &= 0xF7 ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x01 , data ) ;
+ }
+ }
+}
+
+*/
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DisplayOn */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_DisplayOn( PXGI_HW_DEVICE_INFO pXGIHWDE , PVB_DEVICE_INFO pVBInfo )
+{
+
+ XGINew_SetRegANDOR(pVBInfo->P3c4,0x01,0xDF,0x00);
+ if ( pXGIHWDE->jChipType == XG21 )
+ {
+ if ( pVBInfo->IF_DEF_LVDS == 1 )
+ {
+ if (!(XGI_XG21GetPSCValue( pVBInfo )&0x1))
+ {
+ XGI_XG21BLSignalVDD( 0x01 , 0x01, pVBInfo ) ; /* LVDS VDD on */
+ XGI_XG21SetPanelDelay( 2,pVBInfo ) ;
+ }
+ if (!(XGI_XG21GetPSCValue( pVBInfo )&0x20))
+ {
+ XGI_XG21BLSignalVDD( 0x20 , 0x20, pVBInfo ) ; /* LVDS signal on */
+ }
+ XGI_XG21SetPanelDelay( 3,pVBInfo ) ;
+ XGI_XG21BLSignalVDD( 0x02 , 0x02, pVBInfo ) ; /* LVDS backlight on */
+ }
+ else
+ {
+ XGI_XG21BLSignalVDD( 0x20 , 0x20, pVBInfo ) ; /* DVO/DVI signal on */
+ }
+
+ }
+
+ if (pVBInfo->IF_DEF_CH7007 == 1) /* [Billy] 07/05/23 For CH7007 */
+ {
+#ifdef WIN2000
+ if ( IsCH7007TVMode( pVBInfo ) )
+ {
+ TurnOnCH7007(pXGIHWDE->pDevice) ; /* 07/05/28 */
+ }
+#endif
+
+ }
+
+
+ if ( pXGIHWDE->jChipType == XG27 )
+ {
+ if ( pVBInfo->IF_DEF_LVDS == 1 )
+ {
+ if (!(XGI_XG27GetPSCValue( pVBInfo )&0x1))
+ {
+ XGI_XG27BLSignalVDD( 0x01 , 0x01, pVBInfo ) ; /* LVDS VDD on */
+ XGI_XG21SetPanelDelay( 2,pVBInfo ) ;
+ }
+ if (!(XGI_XG27GetPSCValue( pVBInfo )&0x20))
+ {
+ XGI_XG27BLSignalVDD( 0x20 , 0x20, pVBInfo ) ; /* LVDS signal on */
+ }
+ XGI_XG21SetPanelDelay( 3,pVBInfo ) ;
+ XGI_XG27BLSignalVDD( 0x02 , 0x02, pVBInfo ) ; /* LVDS backlight on */
+ }
+ else
+ {
+ XGI_XG27BLSignalVDD( 0x20 , 0x20, pVBInfo ) ; /* DVO/DVI signal on */
+ }
+
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DisplayOff */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_DisplayOff( PXGI_HW_DEVICE_INFO pXGIHWDE , PVB_DEVICE_INFO pVBInfo )
+{
+
+ if ( pXGIHWDE->jChipType == XG21 )
+ {
+ if ( pVBInfo->IF_DEF_LVDS == 1 )
+ {
+ XGI_XG21BLSignalVDD( 0x02 , 0x00, pVBInfo ) ; /* LVDS backlight off */
+ XGI_XG21SetPanelDelay( 3,pVBInfo ) ;
+ }
+ else
+ {
+ XGI_XG21BLSignalVDD( 0x20 , 0x00, pVBInfo ) ; /* DVO/DVI signal off */
+ }
+ }
+
+ if (pVBInfo->IF_DEF_CH7007 == 1) /*[Billy] 07/05/23 For CH7007 */
+ {
+ /* if( IsCH7007TVMode( pVBInfo ) == 0 ) */
+ {
+#ifdef WIN2000
+ TurnOffCH7007(pXGIHWDE->pDevice) ; /* 07/05/28 */
+#endif
+ }
+ }
+
+
+ if ( pXGIHWDE->jChipType == XG27 )
+ {
+ if ((XGI_XG27GetPSCValue( pVBInfo )&0x2))
+ {
+ XGI_XG27BLSignalVDD( 0x02 , 0x00, pVBInfo ) ; /* LVDS backlight off */
+ XGI_XG21SetPanelDelay( 3,pVBInfo ) ;
+ }
+
+ if ( pVBInfo->IF_DEF_LVDS == 0 )
+ {
+ XGI_XG27BLSignalVDD( 0x20 , 0x00, pVBInfo ) ; /* DVO/DVI signal off */
+ }
+ }
+
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x01 , 0xDF , 0x20 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_WaitDisply */
+/* Input : */
+/* Output : */
+/* Description : chiawen for sensecrt1 */
+/* --------------------------------------------------------------------- */
+void XGI_WaitDisply( PVB_DEVICE_INFO pVBInfo )
+{
+ while( ( XGINew_GetReg2( pVBInfo->P3da ) & 0x01 ) )
+ break ;
+
+ while( !( XGINew_GetReg2( pVBInfo->P3da ) & 0x01 ) )
+ break ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SenseCRT1 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+
+void XGI_SenseCRT1( PVB_DEVICE_INFO pVBInfo )
+{
+ UCHAR CRTCData[ 17 ] = { 0x5F , 0x4F , 0x50 , 0x82 , 0x55 , 0x81 ,
+ 0x0B , 0x3E , 0xE9 , 0x0B , 0xDF , 0xE7 ,
+ 0x04 , 0x00 , 0x00 , 0x05 , 0x00 } ;
+
+ UCHAR SR01 = 0 , SR1F = 0 , SR07 = 0 , SR06 = 0 ;
+
+ UCHAR CR17 , CR63 , SR31 ;
+ USHORT temp ;
+ UCHAR DAC_TEST_PARMS[ 3 ] = { 0x0F , 0x0F , 0x0F } ;
+
+ int i ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x05 , 0x86 ) ;
+
+ /* [2004/05/06] Vicent to fix XG42 single LCD sense to CRT+LCD */
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x57 , 0x4A ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x53 , ( UCHAR )( XGINew_GetReg1( pVBInfo->P3d4 , 0x53 ) | 0x02 ) ) ;
+
+ SR31 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x31 ) ;
+ CR63 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x63 ) ;
+ SR01 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x01 ) ;
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x01 , ( UCHAR )( SR01 & 0xDF ) ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x63 , ( UCHAR )( CR63 & 0xBF ) ) ;
+
+ CR17 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x17 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x17 , ( UCHAR )( CR17 | 0x80 ) ) ;
+
+ SR1F = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x1F ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x1F , ( UCHAR )( SR1F | 0x04 ) ) ;
+
+ SR07 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x07 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x07 , ( UCHAR )( SR07 & 0xFB ) ) ;
+ SR06 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x06 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x06 , ( UCHAR )( SR06 & 0xC3 ) ) ;
+
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , 0x00 ) ;
+
+ for( i = 0 ; i < 8 ; i++ )
+ XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )i , CRTCData[ i ] ) ;
+
+ for( i = 8 ; i < 11 ; i++ )
+ XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 8 ) , CRTCData[ i ] ) ;
+
+ for( i = 11 ; i < 13 ; i++ )
+ XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 4 ) , CRTCData[ i ] ) ;
+
+ for( i = 13 ; i < 16 ; i++ )
+ XGINew_SetReg1( pVBInfo->P3c4 , ( USHORT )( i - 3 ) , CRTCData[ i ] ) ;
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x0E , ( UCHAR )( CRTCData[ 16 ] & 0xE0 ) ) ;
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , 0x00 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , 0x1B ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , 0xE1 ) ;
+
+ XGINew_SetReg3( pVBInfo->P3c8 , 0x00 ) ;
+
+ for( i = 0 ; i < 256 ; i++ )
+ {
+ XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , ( UCHAR )DAC_TEST_PARMS[ 0 ] ) ;
+ XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , ( UCHAR )DAC_TEST_PARMS[ 1 ] ) ;
+ XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , ( UCHAR )DAC_TEST_PARMS[ 2 ] ) ;
+ }
+
+ XGI_VBLongWait( pVBInfo ) ;
+ XGI_VBLongWait( pVBInfo ) ;
+ XGI_VBLongWait( pVBInfo ) ;
+
+ XGINew_LCD_Wait_Time( 0x01 , pVBInfo ) ;
+
+ XGI_WaitDisply( pVBInfo ) ;
+ temp = XGINew_GetReg2( pVBInfo->P3c2 ) ;
+
+ if( temp & 0x10 )
+ {
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , 0xDF , 0x20 ) ;
+ }
+ else
+ {
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , 0xDF , 0x00 ) ;
+ }
+
+ /* alan, avoid display something, set BLACK DAC if not restore DAC */
+ XGINew_SetReg3( pVBInfo->P3c8 , 0x00 ) ;
+
+ for( i = 0 ; i < 256 ; i++ )
+ {
+ XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , 0 ) ;
+ XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , 0 ) ;
+ XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , 0 ) ;
+ }
+
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x01 , SR01 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x63 , CR63 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , SR31 ) ;
+
+ /* [2004/05/11] Vicent */
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x53 , ( UCHAR )( XGINew_GetReg1( pVBInfo->P3d4 , 0x53 ) & 0xFD ) ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x1F , ( UCHAR ) SR1F ) ;
+}
+
+
+
+
+
+#ifdef TC
+/* --------------------------------------------------------------------- */
+/* Function : INT1AReturnCode */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int INT1AReturnCode( union REGS regs )
+{
+ if ( regs.x.cflag )
+ {
+ /* printf( "Error to find pci device!\n" ) ; */
+ return( 1 ) ;
+ }
+
+ switch(regs.h.ah)
+ {
+ case 0: return 0;
+ break ;
+ case 0x81:
+ printf( "Function not support\n" ) ;
+ break ;
+ case 0x83:
+ printf( "bad vendor id\n" ) ;
+ break ;
+ case 0x86:
+ printf( "device not found\n" ) ;
+ break ;
+ case 0x87:
+ printf( "bad register number\n" ) ;
+ break ;
+ case 0x88:
+ printf( "set failed\n" ) ;
+ break ;
+ case 0x89:
+ printf( "buffer too small" ) ;
+ break ;
+ default:
+ break ;
+ }
+ return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : FindPCIIOBase */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+unsigned FindPCIIOBase( unsigned index , unsigned deviceid )
+{
+ union REGS regs ;
+
+ regs.h.ah = 0xb1 ; /* PCI_FUNCTION_ID */
+ regs.h.al = 0x02 ; /* FIND_PCI_DEVICE */
+ regs.x.cx = deviceid ;
+ regs.x.dx = 0x1039 ;
+ regs.x.si = index ; /* find n-th device */
+
+ int86( 0x1A , ®s , ®s ) ;
+
+ if ( INT1AReturnCode( regs ) != 0 )
+ return( 0 ) ;
+
+ /* regs.h.bh bus number */
+ /* regs.h.bl device number */
+ regs.h.ah = 0xb1 ; /* PCI_FUNCTION_ID */
+ regs.h.al = 0x09 ; /* READ_CONFIG_WORD */
+ regs.x.cx = deviceid ;
+ regs.x.dx = 0x1039 ;
+ regs.x.di = 0x18 ; /* register number */
+ int86( 0x1A , ®s , ®s ) ;
+
+ if ( INT1AReturnCode( regs ) != 0 )
+ return( 0 ) ;
+
+ return( regs.x.cx ) ;
+}
+
+#endif
+
+
+
+#ifdef TC
+/* --------------------------------------------------------------------- */
+/* Function : main */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void main(int argc, char *argv[])
+{
+ XGI_HW_DEVICE_INFO HwDeviceExtension ;
+ USHORT temp ;
+ USHORT ModeNo ;
+
+ /* HwDeviceExtension.pjVirtualRomBase =(PUCHAR) MK_FP(0xC000,0); */
+ /* HwDeviceExtension.pjVideoMemoryAddress = (PUCHAR)MK_FP(0xA000,0); */
+
+
+ HwDeviceExtension.pjIOAddress = ( FindPCIIOBase( 0 ,0x6300 ) & 0xFF80 ) + 0x30 ;
+ HwDeviceExtension.jChipType = XGI_340 ;
+
+
+
+ /* HwDeviceExtension.pjIOAddress = ( FindPCIIOBase( 0 , 0x5315 ) & 0xFF80 ) + 0x30 ; */
+
+ HwDeviceExtension.pjIOAddress = ( FindPCIIOBase( 0 , 0x330 ) & 0xFF80 ) + 0x30 ;
+ HwDeviceExtension.jChipType = XGI_340 ;
+
+
+ HwDeviceExtension.ujVBChipID = VB_CHIP_301 ;
+ StrCpy(HwDeviceExtension.szVBIOSVer , "0.84" ) ;
+ HwDeviceExtension.bSkipDramSizing = FALSE ;
+ HwDeviceExtension.ulVideoMemorySize = 0 ;
+
+ if ( argc == 2 )
+ {
+ ModeNo = atoi( argv[ 1 ] ) ;
+ }
+ else
+ {
+ ModeNo = 0x2e ;
+ /* ModeNo = 0x37 ; 1024x768x 4bpp */
+ /* ModeNo = 0x38 ; 1024x768x 8bpp */
+ /* ModeNo = 0x4A ; 1024x768x 16bpp */
+ /* ModeNo = 0x47 ; 800x600x 16bpp */
+ }
+
+ /* XGIInitNew( &HwDeviceExtension ) ; */
+ XGISetModeNew( &HwDeviceExtension , ModeNo ) ;
+}
+#endif
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_WaitDisplay */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_WaitDisplay( PVB_DEVICE_INFO pVBInfo )
+{
+ while( !( XGINew_GetReg2( pVBInfo->P3da ) & 0x01 ) ) ;
+
+ while( XGINew_GetReg2( pVBInfo->P3da ) & 0x01 ) ;
+}
+
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT2Group301 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_SetCRT2Group301( USHORT ModeNo , PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT tempbx ,
+ ModeIdIndex ,
+ RefreshRateTableIndex ;
+
+ tempbx=pVBInfo->VBInfo ;
+ pVBInfo->SetFlag |= ProgrammingCRT2 ;
+ XGI_SearchModeID( ModeNo , &ModeIdIndex, pVBInfo ) ;
+ pVBInfo->SelectCRT2Rate = 4 ;
+ RefreshRateTableIndex = XGI_GetRatePtrCRT2( HwDeviceExtension, ModeNo , ModeIdIndex, pVBInfo ) ;
+ XGI_SaveCRT2Info( ModeNo, pVBInfo ) ;
+ XGI_GetCRT2ResInfo( ModeNo , ModeIdIndex, pVBInfo) ;
+ XGI_GetCRT2Data( ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+ XGI_PreSetGroup1( ModeNo , ModeIdIndex , HwDeviceExtension , RefreshRateTableIndex, pVBInfo ) ;
+ XGI_SetGroup1( ModeNo , ModeIdIndex , HwDeviceExtension , RefreshRateTableIndex, pVBInfo ) ;
+ XGI_SetLockRegs( ModeNo , ModeIdIndex , HwDeviceExtension , RefreshRateTableIndex, pVBInfo ) ;
+ XGI_SetGroup2( ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+ XGI_SetLCDRegs(ModeNo , ModeIdIndex , HwDeviceExtension , RefreshRateTableIndex, pVBInfo ) ;
+ XGI_SetTap4Regs(pVBInfo) ;
+ XGI_SetGroup3(ModeNo, ModeIdIndex, pVBInfo);
+ XGI_SetGroup4( ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+ XGI_SetCRT2VCLK( ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+ XGI_SetGroup5( ModeNo , ModeIdIndex, pVBInfo) ;
+ XGI_AutoThreshold( pVBInfo) ;
+ return 1 ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_AutoThreshold */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_AutoThreshold( PVB_DEVICE_INFO pVBInfo )
+{
+ if ( !( pVBInfo->SetFlag & Win9xDOSMode ) )
+ XGINew_SetRegOR( pVBInfo->Part1Port , 0x01 , 0x40 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SaveCRT2Info */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SaveCRT2Info( USHORT ModeNo , PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT temp1 ,
+ temp2 ;
+
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x34 , ModeNo ) ; /* reserve CR34 for CRT1 Mode No */
+ temp1 = ( pVBInfo->VBInfo&SetInSlaveMode ) >> 8 ;
+ temp2 = ~( SetInSlaveMode >> 8 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x31 , temp2 , temp1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetCRT2ResInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetCRT2ResInfo( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT xres ,
+ yres ,
+ modeflag ,
+ resindex ;
+
+ resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo) ;
+ if ( ModeNo <= 0x13 )
+ {
+ xres = pVBInfo->StResInfo[ resindex ].HTotal ;
+ yres = pVBInfo->StResInfo[ resindex ].VTotal ;
+ /* modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; si+St_ResInfo */
+ }
+ else
+ {
+ xres = pVBInfo->ModeResInfo[ resindex ].HTotal ; /* xres->ax */
+ yres = pVBInfo->ModeResInfo[ resindex ].VTotal ; /* yres->bx */
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex].Ext_ModeFlag ; /* si+St_ModeFlag */
+
+/* if ( pVBInfo->IF_DEF_FSTN )
+ {
+ xres *= 2 ;
+ yres *= 2 ;
+ }
+ else
+ {
+*/
+ if ( modeflag & HalfDCLK )
+ xres *= 2;
+
+ if ( modeflag & DoubleScanMode )
+ yres *= 2 ;
+/* } */
+ }
+
+ if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+ {
+ if ( pVBInfo->IF_DEF_LVDS == 0 )
+ {
+ if ( pVBInfo->LCDResInfo == Panel1600x1200 )
+ {
+ if ( !( pVBInfo->LCDInfo & LCDVESATiming ) )
+ {
+ if ( yres == 1024 )
+ yres = 1056 ;
+ }
+ }
+
+ if ( pVBInfo->LCDResInfo == Panel1280x1024 )
+ {
+ if ( yres == 400 )
+ yres = 405 ;
+ else if ( yres == 350 )
+ yres = 360 ;
+
+ if ( pVBInfo->LCDInfo & LCDVESATiming )
+ {
+ if ( yres == 360 )
+ yres = 375 ;
+ }
+ }
+
+ if ( pVBInfo->LCDResInfo == Panel1024x768 )
+ {
+ if ( !( pVBInfo->LCDInfo & LCDVESATiming ) )
+ {
+ if ( !( pVBInfo->LCDInfo & LCDNonExpanding ) )
+ {
+ if ( yres == 350 )
+ yres = 357 ;
+ else if ( yres == 400 )
+ yres = 420 ;
+ else if ( yres == 480 )
+ yres = 525 ;
+ }
+ }
+ }
+ }
+
+ if ( xres == 720 )
+ xres = 640 ;
+ }
+
+ pVBInfo->VGAHDE = xres ;
+ pVBInfo->HDE = xres ;
+ pVBInfo->VGAVDE = yres ;
+ pVBInfo->VDE = yres ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_IsLCDDualLink */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_IsLCDDualLink( PVB_DEVICE_INFO pVBInfo )
+{
+
+ if ( ( ( ( pVBInfo->VBInfo & SetCRT2ToLCD ) | SetCRT2ToLCDA ) ) && ( pVBInfo->LCDInfo & SetLCDDualLink ) ) /* shampoo0129 */
+ return ( 1 ) ;
+
+ return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetCRT2Data */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetCRT2Data( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT tempax = 0,
+ tempbx ,
+ modeflag ,
+ resinfo ;
+
+ XGI_LCDDataStruct *LCDPtr = NULL ;
+ XGI_TVDataStruct *TVPtr = NULL ;
+
+ if ( ModeNo <= 0x13 )
+ {
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ; /* si+St_ResInfo */
+ resinfo = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;
+ }
+ else
+ {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ; /* si+Ext_ResInfo */
+ resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+ }
+
+ pVBInfo->NewFlickerMode = 0 ;
+ pVBInfo->RVBHRS = 50 ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+ {
+ XGI_GetRAMDAC2DATA( ModeNo , ModeIdIndex , RefreshRateTableIndex,pVBInfo ) ;
+ return ;
+ }
+
+ tempbx = 4 ;
+
+ if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+ {
+ LCDPtr = (XGI_LCDDataStruct* )XGI_GetLcdPtr( tempbx, ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+
+ pVBInfo->RVBHCMAX = LCDPtr->RVBHCMAX ;
+ pVBInfo->RVBHCFACT = LCDPtr->RVBHCFACT ;
+ pVBInfo->VGAHT = LCDPtr->VGAHT ;
+ pVBInfo->VGAVT = LCDPtr->VGAVT ;
+ pVBInfo->HT = LCDPtr->LCDHT ;
+ pVBInfo->VT = LCDPtr->LCDVT ;
+
+ if ( pVBInfo->LCDResInfo == Panel1024x768 )
+ {
+ tempax = 1024 ;
+ tempbx = 768 ;
+
+ if ( !( pVBInfo->LCDInfo & LCDVESATiming ) )
+ {
+ if ( pVBInfo->VGAVDE == 357 )
+ tempbx = 527 ;
+ else if ( pVBInfo->VGAVDE == 420 )
+ tempbx = 620 ;
+ else if ( pVBInfo->VGAVDE == 525 )
+ tempbx = 775 ;
+ else if ( pVBInfo->VGAVDE == 600 )
+ tempbx = 775 ;
+ /* else if(pVBInfo->VGAVDE==350) tempbx=560; */
+ /* else if(pVBInfo->VGAVDE==400) tempbx=640; */
+ else
+ tempbx = 768 ;
+ }
+ else
+ tempbx = 768 ;
+ }
+ else if ( pVBInfo->LCDResInfo == Panel1024x768x75 )
+ {
+ tempax = 1024 ;
+ tempbx = 768 ;
+ }
+ else if ( pVBInfo->LCDResInfo == Panel1280x1024 )
+ {
+ tempax = 1280 ;
+ if ( pVBInfo->VGAVDE == 360 )
+ tempbx = 768 ;
+ else if ( pVBInfo->VGAVDE == 375 )
+ tempbx = 800 ;
+ else if ( pVBInfo->VGAVDE == 405 )
+ tempbx = 864 ;
+ else
+ tempbx = 1024 ;
+ }
+ else if ( pVBInfo->LCDResInfo == Panel1280x1024x75 )
+ {
+ tempax = 1280 ;
+ tempbx = 1024 ;
+ }
+ else if ( pVBInfo->LCDResInfo == Panel1280x960 )
+ {
+ tempax = 1280 ;
+ if ( pVBInfo->VGAVDE == 350 )
+ tempbx = 700 ;
+ else if ( pVBInfo->VGAVDE == 400 )
+ tempbx = 800 ;
+ else if ( pVBInfo->VGAVDE == 1024 )
+ tempbx = 960 ;
+ else
+ tempbx = 960 ;
+ }
+ else if ( pVBInfo->LCDResInfo == Panel1400x1050 )
+ {
+ tempax = 1400 ;
+ tempbx = 1050 ;
+
+ if ( pVBInfo->VGAVDE == 1024 )
+ {
+ tempax = 1280 ;
+ tempbx = 1024 ;
+ }
+ }
+ else if ( pVBInfo->LCDResInfo == Panel1600x1200 )
+ {
+ tempax = 1600 ;
+ tempbx = 1200 ; /* alan 10/14/2003 */
+ if ( !( pVBInfo->LCDInfo & LCDVESATiming ) )
+ {
+ if ( pVBInfo->VGAVDE == 350 )
+ tempbx = 875 ;
+ else if ( pVBInfo->VGAVDE == 400 )
+ tempbx = 1000 ;
+ }
+ }
+
+ if ( pVBInfo->LCDInfo & LCDNonExpanding )
+ {
+ tempax = pVBInfo->VGAHDE ;
+ tempbx = pVBInfo->VGAVDE ;
+ }
+
+ pVBInfo->HDE = tempax ;
+ pVBInfo->VDE = tempbx ;
+ return ;
+ }
+
+ if ( pVBInfo->VBInfo & ( SetCRT2ToTV ) )
+ {
+ tempbx = 4 ;
+ TVPtr = ( XGI_TVDataStruct * )XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+
+ pVBInfo->RVBHCMAX = TVPtr->RVBHCMAX ;
+ pVBInfo->RVBHCFACT = TVPtr->RVBHCFACT ;
+ pVBInfo->VGAHT = TVPtr->VGAHT ;
+ pVBInfo->VGAVT = TVPtr->VGAVT ;
+ pVBInfo->HDE = TVPtr->TVHDE ;
+ pVBInfo->VDE = TVPtr->TVVDE ;
+ pVBInfo->RVBHRS = TVPtr->RVBHRS ;
+ pVBInfo->NewFlickerMode = TVPtr->FlickerMode ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+ {
+ if ( resinfo == 0x08 )
+ pVBInfo->NewFlickerMode = 0x40 ;
+ else if ( resinfo == 0x09 )
+ pVBInfo->NewFlickerMode = 0x40 ;
+ else if ( resinfo == 0x12 )
+ pVBInfo->NewFlickerMode = 0x40 ;
+
+ if ( pVBInfo->VGAVDE == 350 )
+ pVBInfo->TVInfo |= TVSimuMode ;
+
+ tempax = ExtHiTVHT ;
+ tempbx = ExtHiTVVT ;
+
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ {
+ if ( pVBInfo->TVInfo & TVSimuMode )
+ {
+ tempax = StHiTVHT ;
+ tempbx = StHiTVVT ;
+
+ if ( !( modeflag & Charx8Dot ) )
+ {
+ tempax = StHiTextTVHT ;
+ tempbx = StHiTextTVVT ;
+ }
+ }
+ }
+ }
+ else if ( pVBInfo->VBInfo & SetCRT2ToYPbPr )
+ {
+ if ( pVBInfo->TVInfo & SetYPbPrMode750p )
+ {
+ tempax = YPbPrTV750pHT ; /* Ext750pTVHT */
+ tempbx = YPbPrTV750pVT ; /* Ext750pTVVT */
+ }
+
+ if ( pVBInfo->TVInfo & SetYPbPrMode525p )
+ {
+ tempax = YPbPrTV525pHT ; /* Ext525pTVHT */
+ tempbx = YPbPrTV525pVT ; /* Ext525pTVVT */
+ }
+ else if ( pVBInfo->TVInfo & SetYPbPrMode525i )
+ {
+ tempax = YPbPrTV525iHT ; /* Ext525iTVHT */
+ tempbx = YPbPrTV525iVT ; /* Ext525iTVVT */
+ if ( pVBInfo->TVInfo & NTSC1024x768 )
+ tempax = NTSC1024x768HT ;
+ }
+ }
+ else
+ {
+ tempax = PALHT ;
+ tempbx = PALVT ;
+ if ( !( pVBInfo->TVInfo & SetPALTV ) )
+ {
+ tempax = NTSCHT ;
+ tempbx = NTSCVT ;
+ if ( pVBInfo->TVInfo & NTSC1024x768 )
+ tempax = NTSC1024x768HT ;
+ }
+ }
+
+ pVBInfo->HT = tempax ;
+ pVBInfo->VT = tempbx ;
+ return ;
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT2VCLK */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT2VCLK( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ UCHAR di_0 ,
+ di_1 ,
+ tempal ;
+
+ tempal = XGI_GetVCLKPtr( RefreshRateTableIndex , ModeNo , ModeIdIndex, pVBInfo ) ;
+ XGI_GetVCLKLen( tempal, &di_0 , &di_1, pVBInfo ) ;
+ XGI_GetLCDVCLKPtr( &di_0 , &di_1, pVBInfo ) ;
+
+ if ( pVBInfo->VBType & VB_XGI301 ) /* shampoo 0129 */
+ { /* 301 */
+ XGINew_SetReg1(pVBInfo->Part4Port , 0x0A , 0x10 ) ;
+ XGINew_SetReg1(pVBInfo->Part4Port , 0x0B , di_1 ) ;
+ XGINew_SetReg1(pVBInfo->Part4Port , 0x0A , di_0 ) ;
+ }
+ else
+ { /* 301b/302b/301lv/302lv */
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x0A , di_0 ) ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x0B , di_1 ) ;
+ }
+
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x00 , 0x12 ) ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+ XGINew_SetRegOR( pVBInfo->Part4Port , 0x12 , 0x28 ) ;
+ else
+ XGINew_SetRegOR( pVBInfo->Part4Port , 0x12 , 0x08 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GETLCDVCLKPtr */
+/* Input : */
+/* Output : al -> VCLK Index */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetLCDVCLKPtr( UCHAR* di_0 , UCHAR *di_1, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT index ;
+
+ if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+ {
+ if ( pVBInfo->IF_DEF_ScaleLCD == 1 )
+ {
+ if ( pVBInfo->LCDInfo & EnableScalingLCD )
+ return ;
+ }
+
+ /* index = XGI_GetLCDCapPtr(pVBInfo) ; */
+ index = XGI_GetLCDCapPtr1( pVBInfo) ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+ { /* LCDB */
+ *di_0 = pVBInfo->LCDCapList[ index ].LCUCHAR_VCLKData1 ;
+ *di_1 = pVBInfo->LCDCapList[ index ].LCUCHAR_VCLKData2 ;
+ }
+ else
+ { /* LCDA */
+ *di_0 = pVBInfo->LCDCapList[ index ].LCDA_VCLKData1 ;
+ *di_1 = pVBInfo->LCDCapList[ index ].LCDA_VCLKData2 ;
+ }
+ }
+ return ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVCLKPtr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGI_GetVCLKPtr(USHORT RefreshRateTableIndex,USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+{
+
+ USHORT index ,
+ modeflag ;
+#ifndef LINUX_XF86
+ USHORT tempbx ;
+#endif
+
+ UCHAR tempal ;
+ UCHAR *CHTVVCLKPtr = NULL ;
+
+ if ( ModeNo <= 0x13 )
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ; /* si+St_ResInfo */
+ else
+ modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; /* si+Ext_ResInfo */
+
+
+ if ( ( pVBInfo->SetFlag & ProgrammingCRT2 ) && ( !( pVBInfo->LCDInfo & EnableScalingLCD ) ) )
+ { /* {LCDA/LCDB} */
+ index = XGI_GetLCDCapPtr(pVBInfo) ;
+ tempal = pVBInfo->LCDCapList[ index ].LCD_VCLK ;
+
+ if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+ return tempal ;
+
+ /* {TV} */
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV| VB_XGI302LV| VB_XGI301C ) )
+ {
+ if(pVBInfo->VBInfo&SetCRT2ToHiVisionTV)
+ {
+ tempal = HiTVVCLKDIV2;
+ if(!(pVBInfo->TVInfo & RPLLDIV2XO))
+ tempal = HiTVVCLK;
+ if(pVBInfo->TVInfo & TVSimuMode)
+ {
+ tempal = HiTVSimuVCLK;
+ if(!(modeflag & Charx8Dot))
+ tempal = HiTVTextVCLK;
+
+ }
+ return tempal;
+ }
+
+ if ( pVBInfo->TVInfo & SetYPbPrMode750p )
+ {
+ tempal = YPbPr750pVCLK ;
+ return tempal ;
+ }
+
+ if ( pVBInfo->TVInfo & SetYPbPrMode525p )
+ {
+ tempal = YPbPr525pVCLK ;
+ return tempal ;
+ }
+
+ tempal = NTSC1024VCLK ;
+
+ if ( !( pVBInfo->TVInfo & NTSC1024x768 ) )
+ {
+ tempal = TVVCLKDIV2 ;
+ if ( !( pVBInfo->TVInfo & RPLLDIV2XO ) )
+ tempal = TVVCLK ;
+ }
+
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ return tempal ;
+ }
+ /*else
+ if((pVBInfo->IF_DEF_CH7017==1)&&(pVBInfo->VBType&VB_CH7017))
+ {
+ if(ModeNo<=0x13)
+ *tempal = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC;
+ else
+ *tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
+ *tempal = *tempal & 0x1F;
+
+ tempbx = 0;
+ if(pVBInfo->TVInfo & SetPALTV)
+ tempbx = tempbx + 2;
+ if(pVBInfo->TVInfo & SetCHTVOverScan)
+ tempbx++;
+ tempbx = tempbx << 1;
+ } */
+ } /* {End of VB} */
+
+ if((pVBInfo->IF_DEF_CH7007==1)&&(pVBInfo->VBType&VB_CH7007)) /* [Billy] 07/05/08 CH7007 */
+ {
+ /* VideoDebugPrint((0, "XGI_GetVCLKPtr: pVBInfo->IF_DEF_CH7007==1\n")); */
+ if ( (pVBInfo->VBInfo & SetCRT2ToTV) )
+ {
+ if( ModeNo <= 0x13 )
+ {
+ tempal = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ;
+ }
+ else
+ {
+ tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
+ }
+
+ tempal = tempal & 0x0F;
+ tempbx = 0;
+
+ if(pVBInfo->TVInfo & SetPALTV)
+ {
+ tempbx = tempbx + 2;
+ }
+ if(pVBInfo->TVInfo & SetCHTVOverScan)
+ {
+ tempbx++;
+ }
+ /** tempbx = tempbx << 1; CH7007 ? **/
+
+/*[Billy]07/05/29 CH7007*/
+ if ( pVBInfo->IF_DEF_CH7007 == 1 )
+ {
+ switch( tempbx )
+ {
+ case 0:
+ CHTVVCLKPtr = XGI7007_CHTVVCLKUNTSC ;
+ break ;
+ case 1:
+ CHTVVCLKPtr = XGI7007_CHTVVCLKONTSC ;
+ break ;
+ case 2:
+ CHTVVCLKPtr = XGI7007_CHTVVCLKUPAL ;
+ break ;
+ case 3:
+ CHTVVCLKPtr = XGI7007_CHTVVCLKOPAL ;
+ break ;
+ default:
+ break ;
+
+ }
+ }
+ /*else
+ {
+ switch( tempbx )
+ {
+ case 0:
+ CHTVVCLKPtr = pVBInfo->CHTVVCLKUNTSC ;
+ break ;
+ case 1:
+ CHTVVCLKPtr = pVBInfo->CHTVVCLKONTSC ;
+ break ;
+ case 2:
+ CHTVVCLKPtr = pVBInfo->CHTVVCLKUPAL ;
+ break ;
+ case 3:
+ CHTVVCLKPtr = pVBInfo->CHTVVCLKOPAL ;
+ break ;
+ default:
+ break ;
+ }
+ }*/
+
+ tempal = CHTVVCLKPtr[ tempal ] ;
+ return tempal ;
+ }
+
+ }
+
+ tempal = ( UCHAR )XGINew_GetReg2( ( pVBInfo->P3ca + 0x02 ) ) ;
+ tempal = tempal >> 2 ;
+ tempal &= 0x03 ;
+
+ if ( ( pVBInfo->LCDInfo & EnableScalingLCD ) && ( modeflag & Charx8Dot ) ) /* for Dot8 Scaling LCD */
+ tempal = tempal ^ tempal ; /* ; set to VCLK25MHz always */
+
+ if ( ModeNo <= 0x13 )
+ return tempal ;
+
+ tempal = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRTVCLK ;
+ return tempal ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVCLKLen */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetVCLKLen(UCHAR tempal,UCHAR* di_0,UCHAR* di_1, PVB_DEVICE_INFO pVBInfo)
+{
+ if ( pVBInfo->IF_DEF_CH7007 == 1 ) /* [Billy] 2007/05/16 */
+ {
+ /* VideoDebugPrint((0, "XGI_GetVCLKLen: pVBInfo->IF_DEF_CH7007==1\n")); */
+ *di_0 = ( UCHAR )XGI_CH7007VCLKData[ tempal ].SR2B ;
+ *di_1 = ( UCHAR )XGI_CH7007VCLKData[ tempal ].SR2C ;
+ }
+ else if ( pVBInfo->VBType & ( VB_XGI301 | VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ if ( ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) ) && ( pVBInfo->SetFlag & ProgrammingCRT2 ) )
+ {
+ *di_0 = ( UCHAR )XGI_VBVCLKData[ tempal ].SR2B ;
+ *di_1 = XGI_VBVCLKData[ tempal ].SR2C ;
+ }
+ }
+ else
+ {
+ *di_0 = XGI_VCLKData[ tempal ].SR2B ;
+ *di_1 = XGI_VCLKData[ tempal ].SR2C ;
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT2Offset */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT2Offset( USHORT ModeNo ,
+ USHORT ModeIdIndex , USHORT RefreshRateTableIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT offset ;
+ UCHAR temp ;
+
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ {
+ return ;
+ }
+
+ offset = XGI_GetOffset( ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+ temp = ( UCHAR )( offset & 0xFF ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , temp ) ;
+ temp =( UCHAR)( ( offset & 0xFF00 ) >> 8 ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x09 , temp ) ;
+ temp =( UCHAR )( ( ( offset >> 3 ) & 0xFF ) + 1 ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x03 , temp ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetOffset */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetOffset(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT temp ,
+ colordepth ,
+ modeinfo ,
+ index ,
+ infoflag ,
+ ColorDepth[] = { 0x01 , 0x02 , 0x04 } ;
+
+ modeinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeInfo ;
+ if ( ModeNo <= 0x14 )
+ infoflag = 0 ;
+ else
+ infoflag = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+
+
+ index = ( modeinfo >> 8 ) & 0xFF ;
+
+ temp = pVBInfo->ScreenOffset[ index ] ;
+
+ if ( infoflag & InterlaceMode )
+ {
+ temp = temp << 1 ;
+ }
+
+ colordepth = XGI_GetColorDepth( ModeNo , ModeIdIndex, pVBInfo ) ;
+
+ if ( ( ModeNo >= 0x7C ) && ( ModeNo <= 0x7E ) )
+ {
+ temp = ModeNo - 0x7C ;
+ colordepth = ColorDepth[ temp ] ;
+ temp = 0x6B ;
+ if ( infoflag & InterlaceMode )
+ {
+ temp = temp << 1 ;
+ }
+ return( temp * colordepth ) ;
+ }
+ else
+ return( temp * colordepth ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT2FIFO */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT2FIFO( PVB_DEVICE_INFO pVBInfo)
+{
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x01 , 0x3B ) ; /* threshold high ,disable auto threshold */
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x02 , ~( 0x3F ) , 0x04 ) ; /* threshold low default 04h */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_PreSetGroup1 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_PreSetGroup1(USHORT ModeNo , USHORT ModeIdIndex ,PXGI_HW_DEVICE_INFO HwDeviceExtension,
+ USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT tempcx = 0 ,
+ CRT1Index = 0 ,
+ resinfo = 0 ;
+
+ if ( ModeNo > 0x13 )
+ {
+ CRT1Index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+ CRT1Index &= IndexMask ;
+ resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+ }
+
+ XGI_SetCRT2Offset( ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+ XGI_SetCRT2FIFO(pVBInfo) ;
+ /* XGI_SetCRT2Sync(ModeNo,RefreshRateTableIndex); */
+
+ for( tempcx = 4 ; tempcx < 7 ; tempcx++ )
+ {
+ XGINew_SetReg1( pVBInfo->Part1Port , tempcx , 0x0 ) ;
+ }
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x50 , 0x00 ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x02 , 0x44 ) ; /* temp 0206 */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetGroup1 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetGroup1( USHORT ModeNo , USHORT ModeIdIndex ,
+ PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT temp = 0 ,
+ tempax = 0 ,
+ tempbx = 0 ,
+ tempcx = 0 ,
+ pushbx = 0 ,
+ CRT1Index = 0 ,
+ modeflag ,
+ resinfo = 0 ;
+
+ if ( ModeNo > 0x13 )
+ {
+ CRT1Index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+ CRT1Index &= IndexMask ;
+ resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+ }
+
+ if ( ModeNo <= 0x13 )
+ {
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+ }
+ else
+ {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+ }
+
+ /* bainy change table name */
+ if ( modeflag & HalfDCLK )
+ {
+ temp = ( pVBInfo->VGAHT / 2 - 1 ) & 0x0FF ; /* BTVGA2HT 0x08,0x09 */
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , temp ) ;
+ temp = ( ( ( pVBInfo->VGAHT / 2 - 1 ) & 0xFF00 ) >> 8 ) << 4 ;
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x09 , ~0x0F0 , temp ) ;
+ temp = ( pVBInfo->VGAHDE / 2 + 16 ) & 0x0FF ; /* BTVGA2HDEE 0x0A,0x0C */
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x0A , temp ) ;
+ tempcx = ( ( pVBInfo->VGAHT - pVBInfo->VGAHDE ) / 2 ) >> 2 ;
+ pushbx = pVBInfo->VGAHDE / 2 + 16 ;
+ tempcx = tempcx >> 1 ;
+ tempbx = pushbx + tempcx ; /* bx BTVGA@HRS 0x0B,0x0C */
+ tempcx += tempbx ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+ {
+ tempbx = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 4 ] ;
+ tempbx |= ( ( pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 14 ] & 0xC0 ) << 2 ) ;
+ tempbx = ( tempbx - 3 ) << 3 ; /* (VGAHRS-3)*8 */
+ tempcx = pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[ 5 ] ;
+ tempcx &= 0x1F ;
+ temp = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 15 ] ;
+ temp = ( temp & 0x04 ) << ( 5 - 2 ) ; /* VGAHRE D[5] */
+ tempcx = ( ( tempcx | temp ) - 3 ) << 3 ; /* (VGAHRE-3)*8 */
+ }
+
+ tempbx += 4 ;
+ tempcx += 4 ;
+
+ if ( tempcx > ( pVBInfo->VGAHT / 2 ) )
+ tempcx = pVBInfo->VGAHT / 2 ;
+
+ temp = tempbx & 0x00FF ;
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x0B , temp ) ;
+ }
+ else
+ {
+ temp = ( pVBInfo->VGAHT - 1 ) & 0x0FF ; /* BTVGA2HT 0x08,0x09 */
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , temp ) ;
+ temp = ( ( ( pVBInfo->VGAHT - 1 ) & 0xFF00 ) >> 8 ) << 4 ;
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x09 , ~0x0F0 , temp ) ;
+ temp = ( pVBInfo->VGAHDE + 16 ) & 0x0FF ; /* BTVGA2HDEE 0x0A,0x0C */
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x0A , temp ) ;
+ tempcx = ( pVBInfo->VGAHT - pVBInfo->VGAHDE ) >> 2 ; /* cx */
+ pushbx = pVBInfo->VGAHDE + 16 ;
+ tempcx = tempcx >> 1 ;
+ tempbx = pushbx + tempcx ; /* bx BTVGA@HRS 0x0B,0x0C */
+ tempcx += tempbx ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+ {
+ tempbx = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 3 ] ;
+ tempbx |= ( ( pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 5 ] & 0xC0 ) << 2 ) ;
+ tempbx = ( tempbx - 3 ) << 3 ; /* (VGAHRS-3)*8 */
+ tempcx = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 4 ] ;
+ tempcx &= 0x1F ;
+ temp = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 6 ] ;
+ temp = ( temp & 0x04 ) << ( 5 - 2 ) ; /* VGAHRE D[5] */
+ tempcx = ( ( tempcx | temp ) - 3 ) << 3 ; /* (VGAHRE-3)*8 */
+ tempbx += 16 ;
+ tempcx += 16 ;
+ }
+
+ if ( tempcx > pVBInfo->VGAHT )
+ tempcx = pVBInfo->VGAHT ;
+
+ temp = tempbx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x0B , temp ) ;
+ }
+
+ tempax = ( tempax & 0x00FF ) | ( tempbx & 0xFF00 ) ;
+ tempbx = pushbx ;
+ tempbx = ( tempbx & 0x00FF ) | ( ( tempbx & 0xFF00 ) << 4 ) ;
+ tempax |= ( tempbx & 0xFF00 ) ;
+ temp = ( tempax & 0xFF00 ) >> 8 ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x0C , temp ) ;
+ temp = tempcx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x0D , temp ) ;
+ tempcx = ( pVBInfo->VGAVT - 1 ) ;
+ temp = tempcx & 0x00FF ;
+
+ if ( pVBInfo->IF_DEF_CH7005 == 1 )
+ {
+ if ( pVBInfo->VBInfo & 0x0C )
+ {
+ temp-- ;
+ }
+ }
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x0E , temp ) ;
+ tempbx = pVBInfo->VGAVDE - 1 ;
+ temp = tempbx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x0F , temp ) ;
+ temp = ( ( tempbx & 0xFF00 ) << 3 ) >> 8 ;
+ temp |= ( ( tempcx & 0xFF00 ) >> 8 ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x12 , temp ) ;
+
+ tempax = pVBInfo->VGAVDE ;
+ tempbx = pVBInfo->VGAVDE ;
+ tempcx = pVBInfo->VGAVT ;
+ tempbx = ( pVBInfo->VGAVT + pVBInfo->VGAVDE ) >> 1 ; /* BTVGA2VRS 0x10,0x11 */
+ tempcx = ( ( pVBInfo->VGAVT - pVBInfo->VGAVDE ) >> 4 ) + tempbx + 1 ; /* BTVGA2VRE 0x11 */
+
+ if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+ {
+ tempbx = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 10 ] ;
+ temp = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 9 ] ;
+
+ if ( temp & 0x04 )
+ tempbx |= 0x0100 ;
+
+ if ( temp & 0x080 )
+ tempbx |= 0x0200 ;
+
+ temp = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 14 ] ;
+
+ if ( temp & 0x08 )
+ tempbx |= 0x0400 ;
+
+ temp = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 11 ] ;
+ tempcx = ( tempcx & 0xFF00 ) | ( temp & 0x00FF ) ;
+ }
+
+ temp = tempbx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x10 , temp ) ;
+ temp = ( ( tempbx & 0xFF00 ) >> 8 ) << 4 ;
+ temp = ( ( tempcx & 0x000F ) | ( temp ) ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x11 , temp ) ;
+ tempax = 0 ;
+
+ if ( modeflag & DoubleScanMode )
+ tempax |= 0x80 ;
+
+ if ( modeflag & HalfDCLK )
+ tempax |= 0x40 ;
+
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2C , ~0x0C0 , tempax ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLockRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetLockRegs( USHORT ModeNo , USHORT ModeIdIndex ,
+ PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT push1 ,
+ push2 ,
+ tempax ,
+ tempbx = 0 ,
+ tempcx ,
+ temp ,
+ resinfo ,
+ modeflag ,
+ CRT1Index ;
+
+ if ( ModeNo <= 0x13 )
+ {
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ; /* si+St_ResInfo */
+ resinfo = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;
+ }
+ else
+ {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ; /* si+Ext_ResInfo */
+ resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+ CRT1Index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+ CRT1Index &= IndexMask;
+ }
+
+ if ( !( pVBInfo->VBInfo & SetInSlaveMode ) )
+ {
+ return ;
+ }
+
+ temp = 0xFF ; /* set MAX HT */
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x03 , temp ) ;
+ /* if ( modeflag & Charx8Dot ) tempcx = 0x08 ; */
+ /* else */
+ tempcx=0x08;
+
+ if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ modeflag |= Charx8Dot ;
+
+ tempax = pVBInfo->VGAHDE ; /* 0x04 Horizontal Display End */
+
+ if ( modeflag & HalfDCLK )
+ tempax = tempax >> 1 ;
+
+ tempax = ( tempax / tempcx ) - 1 ;
+ tempbx |= ( ( tempax & 0x00FF ) << 8 ) ;
+ temp = tempax & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x04 , temp ) ;
+
+ temp = ( tempbx & 0xFF00 ) >> 8 ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ if ( !( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) ) )
+ temp += 2 ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+ {
+ if ( pVBInfo->VBType & VB_XGI301LV )
+ {
+ if ( pVBInfo->VBExtInfo == VB_YPbPr1080i )
+ {
+ if ( resinfo == 7 )
+ temp -= 2 ;
+ }
+ }
+ else
+ if ( resinfo == 7 )
+ temp -= 2 ;
+ }
+ }
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x05 , temp ) ; /* 0x05 Horizontal Display Start */
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x06 , 0x03 ) ; /* 0x06 Horizontal Blank end */
+
+ if ( !( pVBInfo->VBInfo & DisableCRT2Display ) )
+ { /* 030226 bainy */
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ tempax = pVBInfo->VGAHT ;
+ else
+ tempax = XGI_GetVGAHT2( pVBInfo) ;
+ }
+
+ if ( tempax >= pVBInfo->VGAHT )
+ {
+ tempax = pVBInfo->VGAHT ;
+ }
+
+ if ( modeflag & HalfDCLK )
+ {
+ tempax = tempax >> 1 ;
+ }
+
+ tempax = ( tempax / tempcx ) - 5 ;
+ tempcx = tempax ; /* 20030401 0x07 horizontal Retrace Start */
+ if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+ {
+ temp = ( tempbx & 0x00FF ) - 1 ;
+ if ( !( modeflag & HalfDCLK ) )
+ {
+ temp -= 6 ;
+ if ( pVBInfo->TVInfo & TVSimuMode )
+ {
+ temp -= 4 ;
+ if ( ModeNo > 0x13 )
+ temp -= 10 ;
+ }
+ }
+ }
+ else
+ {
+ /* tempcx = tempbx & 0x00FF ; */
+ tempbx = ( tempbx & 0xFF00 ) >> 8 ;
+ tempcx = ( tempcx + tempbx ) >> 1 ;
+ temp = ( tempcx & 0x00FF ) + 2 ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ temp -= 1 ;
+ if ( !( modeflag & HalfDCLK ) )
+ {
+ if ( ( modeflag & Charx8Dot ) )
+ {
+ temp += 4 ;
+ if ( pVBInfo->VGAHDE >= 800 )
+ {
+ temp -= 6 ;
+ }
+ }
+ }
+ }
+ else
+ {
+ if ( !( modeflag & HalfDCLK ) )
+ {
+ temp -= 4 ;
+ if ( pVBInfo->LCDResInfo != Panel1280x960 )
+ {
+ if( pVBInfo->VGAHDE >= 800 )
+ {
+ temp -= 7 ;
+ if ( pVBInfo->ModeType == ModeEGA )
+ {
+ if ( pVBInfo->VGAVDE == 1024 )
+ {
+ temp += 15 ;
+ if ( pVBInfo->LCDResInfo != Panel1280x1024 )
+ {
+ temp += 7 ;
+ }
+ }
+ }
+
+ if ( pVBInfo->VGAHDE >= 1280 )
+ {
+ if ( pVBInfo->LCDResInfo != Panel1280x960 )
+ {
+ if ( pVBInfo->LCDInfo & LCDNonExpanding )
+ {
+ temp += 28 ;
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , temp ) ; /* 0x07 Horizontal Retrace Start */
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0 ) ; /* 0x08 Horizontal Retrace End */
+
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ if ( pVBInfo->TVInfo & TVSimuMode )
+ {
+ if ( ( ModeNo == 0x06 ) || ( ModeNo == 0x10 ) || ( ModeNo == 0x11 ) || ( ModeNo == 0x13 ) || ( ModeNo == 0x0F ) )
+ {
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x5b ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x03 ) ;
+ }
+
+ if ( ( ModeNo == 0x00 ) || ( ModeNo == 0x01 ) )
+ {
+ if ( pVBInfo->TVInfo & SetNTSCTV )
+ {
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x2A ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x61 ) ;
+ }
+ else
+ {
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x2A ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x41 ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x0C , 0xF0 ) ;
+ }
+ }
+
+ if ( ( ModeNo == 0x02 ) || ( ModeNo == 0x03 ) || ( ModeNo == 0x07 ) )
+ {
+ if ( pVBInfo->TVInfo & SetNTSCTV )
+ {
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x54 ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x00 ) ;
+ }
+ else
+ {
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x55 ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x00 ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x0C , 0xF0 ) ;
+ }
+ }
+
+ if ( ( ModeNo == 0x04 ) || ( ModeNo == 0x05 ) || ( ModeNo == 0x0D ) || ( ModeNo == 0x50 ) )
+ {
+ if ( pVBInfo->TVInfo & SetNTSCTV )
+ {
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x30 ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x03 ) ;
+ }
+ else
+ {
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x2f ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x02 ) ;
+ }
+ }
+ }
+ }
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x18 , 0x03 ) ; /* 0x18 SR0B */
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x19 , 0xF0 , 0x00 ) ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x09 , 0xFF ) ; /* 0x09 Set Max VT */
+
+ tempbx = pVBInfo->VGAVT ;
+ push1 = tempbx ;
+ tempcx = 0x121 ;
+ tempbx = pVBInfo->VGAVDE ; /* 0x0E Virtical Display End */
+
+ if ( tempbx == 357 )
+ tempbx = 350 ;
+ if ( tempbx == 360 )
+ tempbx =350 ;
+ if ( tempbx == 375 )
+ tempbx = 350 ;
+ if ( tempbx == 405 )
+ tempbx = 400 ;
+ if ( tempbx == 525 )
+ tempbx = 480 ;
+
+ push2 = tempbx ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+ {
+ if ( pVBInfo->LCDResInfo == Panel1024x768 )
+ {
+ if ( !( pVBInfo->LCDInfo & LCDVESATiming ) )
+ {
+ if ( tempbx == 350 )
+ tempbx += 5 ;
+ if ( tempbx == 480 )
+ tempbx += 5 ;
+ }
+ }
+ }
+ tempbx-- ;
+ temp = tempbx & 0x00FF ;
+ tempbx-- ;
+ temp = tempbx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x10 ,temp ) ; /* 0x10 vertical Blank Start */
+ tempbx = push2 ;
+ tempbx-- ;
+ temp = tempbx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x0E , temp ) ;
+
+ if ( tempbx & 0x0100 )
+ {
+ tempcx |= 0x0002 ;
+ }
+
+ tempax = 0x000B ;
+
+ if ( modeflag & DoubleScanMode )
+ {
+ tempax |= 0x08000 ;
+ }
+
+ if ( tempbx & 0x0200 )
+ {
+ tempcx |= 0x0040 ;
+ }
+
+ temp = ( tempax & 0xFF00 ) >> 8 ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x0B , temp ) ;
+
+ if ( tempbx & 0x0400 )
+ {
+ tempcx |= 0x0600 ;
+ }
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x11 , 0x00 ) ; /* 0x11 Vertival Blank End */
+
+ tempax = push1 ;
+ tempax -= tempbx ; /* 0x0C Vertical Retrace Start */
+ tempax = tempax >> 2 ;
+ push1 = tempax ; /* push ax */
+
+ if ( resinfo != 0x09 )
+ {
+ tempax = tempax << 1 ;
+ tempbx += tempax ;
+ }
+
+ if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+ {
+ if ( pVBInfo->VBType & VB_XGI301LV )
+ {
+ if ( pVBInfo->TVInfo & SetYPbPrMode1080i )
+ tempbx -= 10 ;
+ else
+ {
+ if ( pVBInfo->TVInfo & TVSimuMode )
+ {
+ if ( pVBInfo->TVInfo & SetPALTV )
+ {
+ if ( pVBInfo->VBType & VB_XGI301LV )
+ {
+ if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p | SetYPbPrMode1080i ) ) )
+ tempbx += 40 ;
+ }
+ else
+ tempbx += 40 ;
+ }
+ }
+ }
+ }
+ else
+ tempbx -= 10 ;
+ }
+ else
+ {
+ if ( pVBInfo->TVInfo & TVSimuMode )
+ {
+ if ( pVBInfo->TVInfo & SetPALTV )
+ {
+ if ( pVBInfo->VBType & VB_XGI301LV )
+ {
+ if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p | SetYPbPrMode1080i ) ) )
+ tempbx += 40 ;
+ }
+ else
+ tempbx += 40 ;
+ }
+ }
+ }
+ tempax = push1 ;
+ tempax = tempax >> 2 ;
+ tempax++ ;
+ tempax += tempbx ;
+ push1 = tempax ; /* push ax */
+
+ if ( ( pVBInfo->TVInfo & SetPALTV ) )
+ {
+ if ( tempbx <= 513 )
+ {
+ if ( tempax >= 513 )
+ {
+ tempbx = 513 ;
+ }
+ }
+ }
+
+ temp = tempbx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x0C , temp ) ;
+ tempbx-- ;
+ temp = tempbx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x10 , temp ) ;
+
+ if ( tempbx & 0x0100 )
+ {
+ tempcx |= 0x0008 ;
+ }
+
+ if ( tempbx & 0x0200 )
+ {
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x0B , 0x0FF , 0x20 ) ;
+ }
+
+ tempbx++ ;
+
+ if ( tempbx & 0x0100 )
+ {
+ tempcx |= 0x0004 ;
+ }
+
+ if ( tempbx & 0x0200 )
+ {
+ tempcx |= 0x0080 ;
+ }
+
+ if ( tempbx & 0x0400 )
+ {
+ tempcx |= 0x0C00 ;
+ }
+
+ tempbx = push1 ; /* pop ax */
+ temp = tempbx & 0x00FF ;
+ temp &= 0x0F ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x0D , temp ) ; /* 0x0D vertical Retrace End */
+
+ if ( tempbx & 0x0010 )
+ {
+ tempcx |= 0x2000 ;
+ }
+
+ temp = tempcx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x0A , temp ) ; /* 0x0A CR07 */
+ temp = ( tempcx & 0x0FF00 ) >> 8 ;
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x17 , temp ) ; /* 0x17 SR0A */
+ tempax = modeflag ;
+ temp = ( tempax & 0xFF00 ) >> 8 ;
+
+ temp = ( temp >> 1 ) & 0x09 ;
+
+ if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ temp |= 0x01 ;
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x16 , temp ) ; /* 0x16 SR01 */
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x0F , 0 ) ; /* 0x0F CR14 */
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x12 , 0 ) ; /* 0x12 CR17 */
+
+ if ( pVBInfo->LCDInfo & LCDRGB18Bit )
+ temp = 0x80 ;
+ else
+ temp = 0x00 ;
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x1A , temp ) ; /* 0x1A SR0E */
+
+ return ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetGroup2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetGroup2( USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex,
+ PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT i ,
+ j ,
+ tempax ,
+ tempbx ,
+ tempcx ,
+ temp ,
+ push1 ,
+ push2 ,
+ modeflag ,
+ resinfo ,
+ crt2crtc ;
+ UCHAR *TimingPoint ;
+
+ ULONG longtemp ,
+ tempeax ,
+ tempebx ,
+ temp2 ,
+ tempecx ;
+
+ if ( ModeNo <= 0x13 )
+ {
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ; /* si+St_ResInfo */
+ resinfo = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;
+ crt2crtc = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ;
+ }
+ else
+ {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ; /* si+Ext_ResInfo */
+ resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+ crt2crtc = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT2CRTC ;
+ }
+
+ tempax = 0 ;
+
+ if ( !( pVBInfo->VBInfo & SetCRT2ToAVIDEO ) )
+ tempax |= 0x0800 ;
+
+ if ( !( pVBInfo->VBInfo & SetCRT2ToSVIDEO ) )
+ tempax |= 0x0400 ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToSCART )
+ tempax |= 0x0200 ;
+
+ if ( !( pVBInfo->TVInfo & SetPALTV ) )
+ tempax |= 0x1000 ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+ tempax |= 0x0100 ;
+
+ if ( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) )
+ tempax &= 0xfe00 ;
+
+ tempax = ( tempax & 0xff00 ) >> 8 ;
+
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x0 , tempax ) ;
+ TimingPoint = pVBInfo->NTSCTiming ;
+
+ if ( pVBInfo->TVInfo & SetPALTV )
+ {
+ TimingPoint = pVBInfo->PALTiming ;
+ }
+
+ if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+ {
+ TimingPoint = pVBInfo->HiTVExtTiming ;
+
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ TimingPoint = pVBInfo->HiTVSt2Timing ;
+
+ if ( pVBInfo->SetFlag & TVSimuMode )
+ TimingPoint = pVBInfo->HiTVSt1Timing ;
+
+ if ( !(modeflag & Charx8Dot) )
+ TimingPoint = pVBInfo->HiTVTextTiming ;
+ }
+
+ if ( pVBInfo->VBInfo & SetCRT2ToYPbPr )
+ {
+ if ( pVBInfo->TVInfo & SetYPbPrMode525i )
+ TimingPoint = pVBInfo->YPbPr525iTiming ;
+
+ if ( pVBInfo->TVInfo & SetYPbPrMode525p )
+ TimingPoint = pVBInfo->YPbPr525pTiming ;
+
+ if ( pVBInfo->TVInfo & SetYPbPrMode750p )
+ TimingPoint = pVBInfo->YPbPr750pTiming ;
+ }
+
+ for( i = 0x01 , j = 0 ; i <= 0x2D ; i++ , j++ )
+ {
+ XGINew_SetReg1( pVBInfo->Part2Port , i , TimingPoint[ j ] ) ;
+ }
+
+ for( i = 0x39 ; i <= 0x45 ; i++ , j++ )
+ {
+ XGINew_SetReg1( pVBInfo->Part2Port , i , TimingPoint[ j ] ) ; /* di->temp2[j] */
+ }
+
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x3A , 0x1F , 0x00 ) ;
+ }
+
+ temp = pVBInfo->NewFlickerMode ;
+ temp &= 0x80 ;
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x0A , 0xFF , temp ) ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+ tempax = 950 ;
+
+ if ( pVBInfo->TVInfo & SetPALTV )
+ tempax = 520 ;
+ else
+ tempax = 440 ;
+
+ if ( pVBInfo->VDE <= tempax )
+ {
+ tempax -= pVBInfo->VDE ;
+ tempax = tempax >> 2 ;
+ tempax = ( tempax & 0x00FF ) | ( ( tempax & 0x00FF ) << 8 ) ;
+ push1 = tempax ;
+ temp = ( tempax & 0xFF00 ) >> 8 ;
+ temp += ( USHORT )TimingPoint[ 0 ] ;
+
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ if ( pVBInfo->VBInfo & ( SetCRT2ToAVIDEO | SetCRT2ToSVIDEO | SetCRT2ToSCART | SetCRT2ToYPbPr ) )
+ {
+ tempcx=pVBInfo->VGAHDE;
+ if ( tempcx >= 1024 )
+ {
+ temp = 0x17 ; /* NTSC */
+ if ( pVBInfo->TVInfo & SetPALTV )
+ temp = 0x19 ; /* PAL */
+ }
+ }
+ }
+
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x01 , temp ) ;
+ tempax = push1 ;
+ temp = ( tempax & 0xFF00 ) >> 8 ;
+ temp += TimingPoint[ 1 ] ;
+
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ if ( ( pVBInfo->VBInfo & ( SetCRT2ToAVIDEO | SetCRT2ToSVIDEO | SetCRT2ToSCART | SetCRT2ToYPbPr ) ) )
+ {
+ tempcx = pVBInfo->VGAHDE ;
+ if ( tempcx >= 1024 )
+ {
+ temp = 0x1D ; /* NTSC */
+ if ( pVBInfo->TVInfo & SetPALTV )
+ temp = 0x52 ; /* PAL */
+ }
+ }
+ }
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x02 , temp ) ;
+ }
+
+ /* 301b */
+ tempcx = pVBInfo->HT ;
+
+ if ( XGI_IsLCDDualLink( pVBInfo ) )
+ tempcx = tempcx >> 1 ;
+
+ tempcx -= 2 ;
+ temp = tempcx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x1B , temp ) ;
+
+ temp = ( tempcx & 0xFF00 ) >> 8 ;
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x1D , ~0x0F , temp ) ;
+
+ tempcx = pVBInfo->HT >> 1 ;
+ push1 = tempcx ; /* push cx */
+ tempcx += 7 ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+ {
+ tempcx -= 4 ;
+ }
+
+ temp = tempcx & 0x00FF ;
+ temp = temp << 4 ;
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x22 , 0x0F , temp ) ;
+
+ tempbx = TimingPoint[ j ] | ( ( TimingPoint[ j + 1 ] ) << 8 ) ;
+ tempbx += tempcx ;
+ push2 = tempbx ;
+ temp = tempbx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x24 , temp ) ;
+ temp = ( tempbx & 0xFF00 ) >> 8 ;
+ temp = temp << 4 ;
+ XGINew_SetRegANDOR(pVBInfo->Part2Port,0x25,0x0F,temp);
+
+ tempbx=push2;
+ tempbx=tempbx+8;
+ if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+ {
+ tempbx=tempbx-4;
+ tempcx=tempbx;
+ }
+
+ temp = ( tempbx & 0x00FF ) << 4 ;
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x29 , 0x0F , temp ) ;
+
+ j += 2 ;
+ tempcx += ( TimingPoint[ j ] | ( ( TimingPoint[ j + 1 ] ) << 8 ) ) ;
+ temp = tempcx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x27 , temp ) ;
+ temp = ( ( tempcx & 0xFF00 ) >> 8 ) << 4 ;
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x28 , 0x0F , temp ) ;
+
+ tempcx += 8 ;
+ if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+ {
+ tempcx -= 4 ;
+ }
+
+ temp = tempcx & 0xFF ;
+ temp = temp << 4 ;
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x2A , 0x0F , temp ) ;
+
+ tempcx = push1 ; /* pop cx */
+ j += 2 ;
+ temp = TimingPoint[ j ] | ( ( TimingPoint[ j + 1 ] ) << 8 ) ;
+ tempcx -= temp ;
+ temp = tempcx & 0x00FF ;
+ temp = temp << 4 ;
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x2D , 0x0F ,temp ) ;
+
+ tempcx -= 11 ;
+
+ if ( !( pVBInfo->VBInfo & SetCRT2ToTV ) )
+ {
+ tempax = XGI_GetVGAHT2( pVBInfo) ;
+ tempcx = tempax - 1 ;
+ }
+ temp = tempcx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x2E , temp ) ;
+
+ tempbx = pVBInfo->VDE ;
+
+ if ( pVBInfo->VGAVDE == 360 )
+ tempbx = 746 ;
+ if ( pVBInfo->VGAVDE == 375 )
+ tempbx = 746 ;
+ if ( pVBInfo->VGAVDE == 405 )
+ tempbx = 853 ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) ) )
+ tempbx = tempbx >> 1 ;
+ }
+ else
+ tempbx = tempbx >> 1 ;
+ }
+
+ tempbx -= 2 ;
+ temp = tempbx & 0x00FF ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+ {
+ if ( pVBInfo->VBType & VB_XGI301LV )
+ {
+ if ( pVBInfo->TVInfo & SetYPbPrMode1080i )
+ {
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ {
+ if ( ModeNo == 0x2f )
+ temp += 1 ;
+ }
+ }
+ }
+ else
+ {
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ {
+ if ( ModeNo == 0x2f )
+ temp += 1 ;
+ }
+ }
+ }
+
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x2F , temp ) ;
+
+ temp = ( tempcx & 0xFF00 ) >> 8 ;
+ temp |= ( ( tempbx & 0xFF00 ) >> 8 ) << 6 ;
+
+ if ( !( pVBInfo->VBInfo & SetCRT2ToHiVisionTV ) )
+ {
+ if ( pVBInfo->VBType & VB_XGI301LV )
+ {
+ if ( pVBInfo->TVInfo & SetYPbPrMode1080i )
+ {
+ temp |= 0x10 ;
+
+ if ( !( pVBInfo->VBInfo & SetCRT2ToSVIDEO ) )
+ temp |= 0x20 ;
+ }
+ }
+ else
+ {
+ temp |= 0x10 ;
+ if ( !( pVBInfo->VBInfo & SetCRT2ToSVIDEO ) )
+ temp |= 0x20 ;
+ }
+ }
+
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x30 , temp ) ;
+
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) ) /* TV gatingno */
+ {
+ tempbx = pVBInfo->VDE ;
+ tempcx = tempbx - 2 ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) ) )
+ tempbx = tempbx >> 1 ;
+ }
+
+ if ( pVBInfo->VBType & ( VB_XGI302LV | VB_XGI301C ) )
+ {
+ temp=0;
+ if( tempcx & 0x0400 )
+ temp |= 0x20 ;
+
+ if ( tempbx & 0x0400 )
+ temp |= 0x40 ;
+
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x10 , temp ) ;
+ }
+
+ temp = ( ( ( tempbx - 3 ) & 0x0300 ) >> 8 ) << 5 ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x46 , temp ) ;
+ temp = ( tempbx - 3 ) & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x47 , temp ) ;
+ }
+
+ tempbx = tempbx & 0x00FF ;
+
+ if ( !( modeflag & HalfDCLK ) )
+ {
+ tempcx = pVBInfo->VGAHDE ;
+ if ( tempcx >= pVBInfo->HDE )
+ {
+ tempbx |= 0x2000 ;
+ tempax &= 0x00FF ;
+ }
+ }
+
+ tempcx = 0x0101 ;
+
+ if( pVBInfo->VBInfo & SetCRT2ToTV ) { /*301b*/
+ if(pVBInfo->VGAHDE>=1024)
+ {
+ tempcx=0x1920;
+ if(pVBInfo->VGAHDE>=1280)
+ {
+ tempcx=0x1420;
+ tempbx=tempbx&0xDFFF;
+ }
+ }
+ }
+
+ if ( !( tempbx & 0x2000 ) )
+ {
+ if ( modeflag & HalfDCLK )
+ {
+ tempcx = ( tempcx & 0xFF00 ) | ( ( tempcx & 0x00FF ) << 1 ) ;
+ }
+
+ push1 = tempbx ;
+ tempeax = pVBInfo->VGAHDE ;
+ tempebx = ( tempcx & 0xFF00 ) >> 8 ;
+ longtemp = tempeax * tempebx ;
+ tempecx = tempcx & 0x00FF ;
+ longtemp = longtemp / tempecx ;
+
+ /* 301b */
+ tempecx = 8 * 1024 ;
+
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ tempecx = tempecx * 8 ;
+ }
+
+ longtemp = longtemp * tempecx ;
+ tempecx = pVBInfo->HDE ;
+ temp2 = longtemp % tempecx ;
+ tempeax = longtemp / tempecx ;
+ if ( temp2 != 0 )
+ {
+ tempeax += 1 ;
+ }
+
+ tempax = ( USHORT )tempeax ;
+
+ /* 301b */
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ tempcx = ( ( tempax & 0xFF00 ) >> 5 ) >> 8 ;
+ }
+ /* end 301b */
+
+ tempbx = push1 ;
+ tempbx =( USHORT )( ( ( tempeax & 0x0000FF00 ) & 0x1F00 ) | ( tempbx & 0x00FF ) ) ;
+ tempax =( USHORT )( ( ( tempeax & 0x000000FF ) << 8 ) | ( tempax & 0x00FF ) ) ;
+ temp = ( tempax & 0xFF00 ) >> 8 ;
+ }
+ else
+ {
+ temp = ( tempax & 0x00FF ) >> 8 ;
+ }
+
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x44 , temp ) ;
+ temp = ( tempbx & 0xFF00 ) >> 8 ;
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x45 , ~0x03F , temp ) ;
+ temp = tempcx & 0x00FF ;
+
+ if ( tempbx & 0x2000 )
+ temp = 0 ;
+
+ if ( !( pVBInfo->VBInfo & SetCRT2ToLCD ) )
+ temp |= 0x18 ;
+
+ XGINew_SetRegANDOR(pVBInfo->Part2Port,0x46,~0x1F,temp);
+ if ( pVBInfo->TVInfo & SetPALTV )
+ {
+ tempbx = 0x0382 ;
+ tempcx = 0x007e ;
+ }
+ else
+ {
+ tempbx = 0x0369 ;
+ tempcx = 0x0061 ;
+ }
+
+ temp = tempbx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x4b , temp ) ;
+ temp = tempcx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x4c , temp ) ;
+
+ temp = ( ( tempcx & 0xFF00 ) >> 8 ) & 0x03 ;
+ temp = temp << 2 ;
+ temp |= ( ( tempbx & 0xFF00 ) >> 8 ) & 0x03 ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToYPbPr )
+ {
+ temp |= 0x10 ;
+
+ if ( pVBInfo->TVInfo & SetYPbPrMode525p )
+ temp |= 0x20 ;
+
+ if ( pVBInfo->TVInfo & SetYPbPrMode750p )
+ temp |= 0x60 ;
+ }
+
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x4d , temp ) ;
+ temp=XGINew_GetReg1( pVBInfo->Part2Port , 0x43 ) ; /* 301b change */
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x43 , ( USHORT )( temp - 3 ) ) ;
+
+ if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) ) )
+ {
+ if ( pVBInfo->TVInfo & NTSC1024x768 )
+ {
+ TimingPoint = XGI_NTSC1024AdjTime ;
+ for( i = 0x1c , j = 0 ; i <= 0x30 ; i++ , j++ )
+ {
+ XGINew_SetReg1( pVBInfo->Part2Port , i , TimingPoint[ j ] ) ;
+ }
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x43 , 0x72 ) ;
+ }
+ }
+
+ /* [ycchen] 01/14/03 Modify for 301C PALM Support */
+ if ( pVBInfo->VBType & VB_XGI301C )
+ {
+ if ( pVBInfo->TVInfo & SetPALMTV )
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x4E , ~0x08 , 0x08 ) ; /* PALM Mode */
+ }
+
+ if ( pVBInfo->TVInfo & SetPALMTV )
+ {
+ tempax = ( UCHAR )XGINew_GetReg1( pVBInfo->Part2Port , 0x01 ) ;
+ tempax-- ;
+ XGINew_SetRegAND( pVBInfo->Part2Port , 0x01 , tempax ) ;
+
+ /* if ( !( pVBInfo->VBType & VB_XGI301C ) ) */
+ XGINew_SetRegAND( pVBInfo->Part2Port , 0x00 , 0xEF ) ;
+ }
+
+ if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+ {
+ if ( !( pVBInfo->VBInfo & SetInSlaveMode ) )
+ {
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x0B , 0x00 ) ;
+ }
+ }
+
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ return ;
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLCDRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetLCDRegs(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT push1 ,
+ push2 ,
+ pushbx ,
+ tempax ,
+ tempbx ,
+ tempcx ,
+ temp ,
+ tempah ,
+ tempbh ,
+ tempch ,
+ resinfo ,
+ modeflag ,
+ CRT1Index ;
+
+ XGI_LCDDesStruct *LCDBDesPtr = NULL ;
+
+
+ if ( ModeNo <= 0x13 )
+ {
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ; /* si+St_ResInfo */
+ resinfo = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;
+ }
+ else
+ {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ; /* si+Ext_ResInfo */
+ resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+ CRT1Index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+ CRT1Index &= IndexMask ;
+ }
+
+ if ( !( pVBInfo->VBInfo & SetCRT2ToLCD ) )
+ {
+ return ;
+ }
+
+ tempbx = pVBInfo->HDE ; /* RHACTE=HDE-1 */
+
+ if ( XGI_IsLCDDualLink( pVBInfo ) )
+ tempbx = tempbx >> 1 ;
+
+ tempbx -= 1 ;
+ temp = tempbx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x2C , temp ) ;
+ temp = ( tempbx & 0xFF00 ) >> 8 ;
+ temp = temp << 4 ;
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x2B , 0x0F , temp ) ;
+ temp = 0x01 ;
+
+ if ( pVBInfo->LCDResInfo == Panel1280x1024 )
+ {
+ if ( pVBInfo->ModeType == ModeEGA )
+ {
+ if ( pVBInfo->VGAHDE >= 1024 )
+ {
+ temp = 0x02 ;
+ if ( pVBInfo->LCDInfo & LCDVESATiming )
+ temp = 0x01 ;
+ }
+ }
+ }
+
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x0B , temp ) ;
+ tempbx = pVBInfo->VDE ; /* RTVACTEO=(VDE-1)&0xFF */
+ push1 = tempbx ;
+ tempbx-- ;
+ temp = tempbx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x03 , temp ) ;
+ temp = ( ( tempbx & 0xFF00 ) >> 8 ) & 0x07 ;
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x0C , ~0x07 , temp ) ;
+
+ tempcx = pVBInfo->VT - 1 ;
+ push2 = tempcx + 1 ;
+ temp = tempcx & 0x00FF ; /* RVTVT=VT-1 */
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x19 , temp ) ;
+ temp = ( tempcx & 0xFF00 ) >> 8 ;
+ temp = temp << 5 ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x1A , temp ) ;
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x09 , 0xF0 , 0x00 ) ;
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x0A , 0xF0 , 0x00 ) ;
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x17 , 0xFB , 0x00 ) ;
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x18 , 0xDF , 0x00 ) ;
+
+ /* Customized LCDB Des no add */
+ tempbx = 5 ;
+ LCDBDesPtr = ( XGI_LCDDesStruct * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+ tempah = pVBInfo->LCDResInfo ;
+ tempah &= PanelResInfo ;
+
+ if ( ( tempah == Panel1024x768 ) || ( tempah == Panel1024x768x75 ) )
+ {
+ tempbx = 1024 ;
+ tempcx = 768 ;
+ }
+ else if ( ( tempah == Panel1280x1024 ) || ( tempah == Panel1280x1024x75 ) )
+ {
+ tempbx = 1280 ;
+ tempcx = 1024 ;
+ }
+ else if ( tempah == Panel1400x1050 )
+ {
+ tempbx = 1400 ;
+ tempcx = 1050 ;
+ }
+ else
+ {
+ tempbx = 1600 ;
+ tempcx = 1200 ;
+ }
+
+ if ( pVBInfo->LCDInfo & EnableScalingLCD )
+ {
+ tempbx = pVBInfo->HDE ;
+ tempcx = pVBInfo->VDE ;
+ }
+
+ pushbx = tempbx ;
+ tempax = pVBInfo->VT ;
+ pVBInfo->LCDHDES = LCDBDesPtr->LCDHDES ;
+ pVBInfo->LCDHRS = LCDBDesPtr->LCDHRS ;
+ pVBInfo->LCDVDES = LCDBDesPtr->LCDVDES ;
+ pVBInfo->LCDVRS = LCDBDesPtr->LCDVRS ;
+ tempbx = pVBInfo->LCDVDES ;
+ tempcx += tempbx ;
+
+ if ( tempcx >= tempax )
+ tempcx -= tempax ; /* lcdvdes */
+
+ temp = tempbx & 0x00FF ; /* RVEQ1EQ=lcdvdes */
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x05 , temp ) ;
+ temp = tempcx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x06 , temp ) ;
+ tempch = ( ( tempcx & 0xFF00 ) >> 8 ) & 0x07 ;
+ tempbh = ( ( tempbx & 0xFF00 ) >> 8 ) & 0x07 ;
+ tempah = tempch ;
+ tempah = tempah << 3 ;
+ tempah |= tempbh ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x02 , tempah ) ;
+
+ /* getlcdsync() */
+ XGI_GetLCDSync( &tempax , &tempbx,pVBInfo ) ;
+ tempcx = tempbx ;
+ tempax = pVBInfo->VT ;
+ tempbx = pVBInfo->LCDVRS ;
+
+ /* if ( SetLCD_Info & EnableScalingLCD ) */
+ tempcx += tempbx ;
+ if ( tempcx >= tempax )
+ tempcx -= tempax ;
+
+ temp = tempbx & 0x00FF ; /* RTVACTEE=lcdvrs */
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x04 , temp ) ;
+ temp = ( tempbx & 0xFF00 ) >> 8 ;
+ temp = temp << 4 ;
+ temp |= ( tempcx & 0x000F ) ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x01 , temp ) ;
+ tempcx = pushbx ;
+ tempax = pVBInfo->HT ;
+ tempbx = pVBInfo->LCDHDES ;
+ tempbx &= 0x0FFF ;
+
+ if ( XGI_IsLCDDualLink( pVBInfo ) )
+ {
+ tempax = tempax >> 1 ;
+ tempbx = tempbx >> 1 ;
+ tempcx = tempcx >> 1 ;
+ }
+
+ if ( pVBInfo->VBType & VB_XGI302LV )
+ tempbx += 1 ;
+
+ if ( pVBInfo->VBType & VB_XGI301C ) /* tap4 */
+ tempbx += 1 ;
+
+ tempcx += tempbx ;
+
+ if ( tempcx >= tempax )
+ tempcx -= tempax ;
+
+ temp = tempbx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x1F , temp ) ; /* RHBLKE=lcdhdes */
+ temp = ( ( tempbx & 0xFF00 ) >> 8 ) << 4 ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x20 , temp ) ;
+ temp = tempcx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x23 , temp ) ; /* RHEQPLE=lcdhdee */
+ temp = ( tempcx & 0xFF00 ) >> 8 ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x25 , temp ) ;
+
+ /* getlcdsync() */
+ XGI_GetLCDSync( &tempax , &tempbx ,pVBInfo) ;
+ tempcx = tempax ;
+ tempax = pVBInfo->HT ;
+ tempbx = pVBInfo->LCDHRS ;
+ /* if ( SetLCD_Info & EnableScalingLCD) */
+ if ( XGI_IsLCDDualLink( pVBInfo) )
+ {
+ tempax = tempax >> 1 ;
+ tempbx = tempbx >> 1 ;
+ tempcx = tempcx >> 1 ;
+ }
+
+ if ( pVBInfo->VBType & VB_XGI302LV )
+ tempbx += 1 ;
+
+ tempcx += tempbx ;
+
+ if ( tempcx >= tempax )
+ tempcx -= tempax ;
+
+ temp = tempbx & 0x00FF ; /* RHBURSTS=lcdhrs */
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x1C , temp ) ;
+
+ temp = ( tempbx & 0xFF00 ) >> 8 ;
+ temp = temp << 4 ;
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x1D , ~0x0F0 , temp ) ;
+ temp = tempcx & 0x00FF ; /* RHSYEXP2S=lcdhre */
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x21 , temp ) ;
+
+ if ( !( pVBInfo->LCDInfo & LCDVESATiming ) )
+ {
+ if ( pVBInfo->VGAVDE == 525 )
+ {
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ temp = 0xC6 ;
+ }
+ else
+ temp = 0xC4 ;
+
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x2f , temp ) ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x30 , 0xB3 ) ;
+ }
+
+ if ( pVBInfo->VGAVDE == 420 )
+ {
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ temp = 0x4F ;
+ }
+ else
+ temp = 0x4E ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x2f , temp ) ;
+ }
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetTap4Ptr */
+/* Input : */
+/* Output : di -> Tap4 Reg. Setting Pointer */
+/* Description : */
+/* --------------------------------------------------------------------- */
+XGI301C_Tap4TimingStruct* XGI_GetTap4Ptr(USHORT tempcx, PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT tempax ,
+ tempbx ,
+ i ;
+
+ XGI301C_Tap4TimingStruct *Tap4TimingPtr ;
+
+ if ( tempcx == 0 )
+ {
+ tempax = pVBInfo->VGAHDE ;
+ tempbx = pVBInfo->HDE ;
+ }
+ else
+ {
+ tempax = pVBInfo->VGAVDE ;
+ tempbx = pVBInfo->VDE ;
+ }
+
+ if ( tempax < tempbx )
+ return &EnlargeTap4Timing[ 0 ] ;
+ else if( tempax == tempbx )
+ return &NoScaleTap4Timing[ 0 ] ; /* 1:1 */
+ else
+ Tap4TimingPtr = NTSCTap4Timing ; /* NTSC */
+
+ if ( pVBInfo->TVInfo & SetPALTV )
+ Tap4TimingPtr = PALTap4Timing ;
+
+
+ if ( pVBInfo->VBInfo & SetCRT2ToYPbPr )
+ {
+ if ( pVBInfo->TVInfo & SetYPbPrMode525i )
+ Tap4TimingPtr = YPbPr525iTap4Timing ;
+ if ( pVBInfo->TVInfo & SetYPbPrMode525p )
+ Tap4TimingPtr = YPbPr525pTap4Timing ;
+ if ( pVBInfo->TVInfo & SetYPbPrMode750p )
+ Tap4TimingPtr = YPbPr750pTap4Timing ;
+ }
+
+ if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+ Tap4TimingPtr = HiTVTap4Timing ;
+
+ i = 0 ;
+ while( Tap4TimingPtr[ i ].DE != 0xFFFF )
+ {
+ if ( Tap4TimingPtr[ i ].DE == tempax )
+ break ;
+ i++ ;
+ }
+ return &Tap4TimingPtr[ i ] ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetTap4Regs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetTap4Regs( PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT i ,
+ j ;
+
+ XGI301C_Tap4TimingStruct *Tap4TimingPtr ;
+
+ if ( !( pVBInfo->VBType & VB_XGI301C ) )
+ return ;
+
+#ifndef Tap4
+ XGINew_SetRegAND( pVBInfo->Part2Port , 0x4E , 0xEB ) ; /* Disable Tap4 */
+#else /* Tap4 Setting */
+
+ Tap4TimingPtr = XGI_GetTap4Ptr( 0 , pVBInfo) ; /* Set Horizontal Scaling */
+ for( i = 0x80 , j = 0 ; i <= 0xBF ; i++ , j++ )
+ XGINew_SetReg1( pVBInfo->Part2Port , i , Tap4TimingPtr->Reg[ j ] ) ;
+
+ if ( ( pVBInfo->VBInfo & SetCRT2ToTV ) && ( !( pVBInfo->VBInfo & SetCRT2ToHiVisionTV ) ) )
+ {
+ Tap4TimingPtr = XGI_GetTap4Ptr( 1 , pVBInfo); /* Set Vertical Scaling */
+ for( i = 0xC0 , j = 0 ; i < 0xFF ; i++ , j++ )
+ XGINew_SetReg1( pVBInfo->Part2Port , i , Tap4TimingPtr->Reg[ j ] ) ;
+ }
+
+ if ( ( pVBInfo->VBInfo & SetCRT2ToTV ) && ( !( pVBInfo->VBInfo & SetCRT2ToHiVisionTV ) ) )
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x4E , ~0x14 , 0x04 ) ; /* Enable V.Scaling */
+ else
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x4E , ~0x14 , 0x10 ) ; /* Enable H.Scaling */
+#endif
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetGroup3 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetGroup3(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT i;
+ UCHAR *tempdi;
+ USHORT modeflag;
+
+ if(ModeNo<=0x13)
+ {
+ modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; /* si+St_ResInfo */
+ }
+ else
+ {
+ modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag; /* si+Ext_ResInfo */
+ }
+
+
+ XGINew_SetReg1(pVBInfo->Part3Port,0x00,0x00);
+ if(pVBInfo->TVInfo&SetPALTV)
+ {
+ XGINew_SetReg1(pVBInfo->Part3Port,0x13,0xFA);
+ XGINew_SetReg1(pVBInfo->Part3Port,0x14,0xC8);
+ }
+ else
+ {
+ XGINew_SetReg1(pVBInfo->Part3Port,0x13,0xF5);
+ XGINew_SetReg1(pVBInfo->Part3Port,0x14,0xB7);
+ }
+
+ if(!(pVBInfo->VBInfo&SetCRT2ToTV))
+ {
+ return;
+ }
+
+ if(pVBInfo->TVInfo&SetPALMTV)
+ {
+ XGINew_SetReg1(pVBInfo->Part3Port,0x13,0xFA);
+ XGINew_SetReg1(pVBInfo->Part3Port,0x14,0xC8);
+ XGINew_SetReg1(pVBInfo->Part3Port,0x3D,0xA8);
+ }
+
+ if((pVBInfo->VBInfo&SetCRT2ToHiVisionTV)|| (pVBInfo->VBInfo&SetCRT2ToYPbPr))
+ {
+ if(pVBInfo->TVInfo & SetYPbPrMode525i)
+ {
+ return;
+ }
+ tempdi=pVBInfo->HiTVGroup3Data;
+ if(pVBInfo->SetFlag&TVSimuMode)
+ {
+ tempdi=pVBInfo->HiTVGroup3Simu;
+ if(!(modeflag&Charx8Dot))
+ {
+ tempdi=pVBInfo->HiTVGroup3Text;
+ }
+ }
+
+ if(pVBInfo->TVInfo & SetYPbPrMode525p)
+ {
+ tempdi=pVBInfo->Ren525pGroup3;
+ }
+ if(pVBInfo->TVInfo & SetYPbPrMode750p)
+ {
+ tempdi=pVBInfo->Ren750pGroup3;
+ }
+
+ for(i=0;i<=0x3E;i++)
+ {
+ XGINew_SetReg1(pVBInfo->Part3Port,i,tempdi[i]);
+ }
+ if(pVBInfo->VBType&VB_XGI301C) /* Marcovision */
+ {
+ if(pVBInfo->TVInfo & SetYPbPrMode525p)
+ {
+ XGINew_SetReg1(pVBInfo->Part3Port,0x28,0x3f);
+ }
+ }
+ }
+ return;
+} /* {end of XGI_SetGroup3} */
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetGroup4 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetGroup4(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT tempax ,
+ tempcx ,
+ tempbx ,
+ modeflag ,
+ temp ,
+ temp2 ;
+
+ ULONG tempebx ,
+ tempeax ,
+ templong ;
+
+
+ if ( ModeNo <= 0x13 )
+ {
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ; /* si+St_ResInfo */
+ }
+ else
+ {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ; /* si+Ext_ResInfo */
+ }
+
+ temp = pVBInfo->RVBHCFACT ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x13 , temp ) ;
+
+ tempbx = pVBInfo->RVBHCMAX ;
+ temp = tempbx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x14 , temp ) ;
+ temp2 = ( ( tempbx & 0xFF00 ) >> 8 ) << 7 ;
+ tempcx = pVBInfo->VGAHT - 1 ;
+ temp = tempcx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x16 , temp ) ;
+
+ temp =( ( tempcx & 0xFF00 ) >> 8 ) << 3 ;
+ temp2 |= temp ;
+
+ tempcx = pVBInfo->VGAVT - 1 ;
+ if ( !( pVBInfo->VBInfo & SetCRT2ToTV ) )
+ {
+ tempcx -= 5 ;
+ }
+
+ temp = tempcx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x17 , temp ) ;
+ temp = temp2 | ( ( tempcx & 0xFF00 ) >> 8 ) ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x15 , temp ) ;
+ XGINew_SetRegOR( pVBInfo->Part4Port , 0x0D , 0x08 ) ;
+ tempcx = pVBInfo->VBInfo ;
+ tempbx = pVBInfo->VGAHDE ;
+
+ if ( modeflag & HalfDCLK )
+ {
+ tempbx = tempbx >> 1 ;
+ }
+
+ if ( XGI_IsLCDDualLink( pVBInfo ) )
+ tempbx = tempbx >> 1 ;
+
+ if(tempcx&SetCRT2ToHiVisionTV)
+ {
+ temp=0;
+ if(tempbx<=1024)
+ temp=0xA0;
+ if(tempbx == 1280)
+ temp = 0xC0;
+ }
+ else if(tempcx&SetCRT2ToTV)
+ {
+ temp=0xA0;
+ if(tempbx <= 800)
+ temp=0x80;
+ }
+ else
+ {
+ temp=0x80;
+ if(pVBInfo->VBInfo&SetCRT2ToLCD)
+ {
+ temp=0;
+ if(tempbx>800)
+ temp=0x60;
+ }
+ }
+
+ if ( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) )
+ {
+ temp = 0x00 ;
+ if ( pVBInfo->VGAHDE == 1280 )
+ temp = 0x40 ;
+ if ( pVBInfo->VGAHDE == 1024 )
+ temp = 0x20 ;
+ }
+ XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x0E , ~0xEF , temp ) ;
+
+ tempebx = pVBInfo->VDE ;
+
+ if ( tempcx & SetCRT2ToHiVisionTV )
+ {
+ if ( !( temp & 0xE000 ) )
+ tempbx = tempbx >> 1 ;
+ }
+
+ tempcx = pVBInfo->RVBHRS ;
+ temp = tempcx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x18 , temp );
+
+ tempeax = pVBInfo->VGAVDE ;
+ tempcx |= 0x04000 ;
+
+
+ if ( tempeax <= tempebx )
+ {
+ tempcx=(tempcx&(~0x4000));
+ tempeax = pVBInfo->VGAVDE ;
+ }
+ else
+ {
+ tempeax -= tempebx ;
+ }
+
+
+ templong = ( tempeax * 256 * 1024 ) % tempebx ;
+ tempeax = ( tempeax * 256 * 1024 ) / tempebx ;
+ tempebx = tempeax ;
+
+ if ( templong != 0 )
+ {
+ tempebx++ ;
+ }
+
+
+ temp = ( USHORT )( tempebx & 0x000000FF ) ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x1B , temp ) ;
+
+ temp = ( USHORT )( ( tempebx & 0x0000FF00 ) >> 8 ) ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x1A , temp ) ;
+ tempbx = ( USHORT )( tempebx >> 16 ) ;
+ temp = tempbx & 0x00FF ;
+ temp = temp << 4 ;
+ temp |= ( ( tempcx & 0xFF00 ) >> 8 ) ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x19 , temp ) ;
+
+ /* 301b */
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ temp = 0x0028 ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x1C , temp ) ;
+ tempax = pVBInfo->VGAHDE ;
+ if ( modeflag & HalfDCLK )
+ {
+ tempax = tempax >> 1 ;
+ }
+
+ if ( XGI_IsLCDDualLink( pVBInfo ) )
+ tempax = tempax >> 1 ;
+
+ /* if((pVBInfo->VBInfo&(SetCRT2ToLCD))||((pVBInfo->TVInfo&SetYPbPrMode525p)||(pVBInfo->TVInfo&SetYPbPrMode750p))) { */
+ if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+ {
+ if ( tempax > 800 )
+ tempax -= 800 ;
+ }
+ else
+ {
+ if ( pVBInfo->VGAHDE > 800 )
+ {
+ if ( pVBInfo->VGAHDE == 1024 )
+ tempax = ( tempax * 25 / 32 ) - 1 ;
+ else
+ tempax = ( tempax * 20 / 32 ) - 1 ;
+ }
+ }
+ tempax -= 1 ;
+
+/*
+ if ( pVBInfo->VBInfo & ( SetCRT2ToTV | SetCRT2ToHiVisionTV ) )
+ {
+ if ( pVBInfo->VBType & VB_XGI301LV )
+ {
+ if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p | SetYPbPrMode1080i ) ) )
+ {
+ if ( pVBInfo->VGAHDE > 800 )
+ {
+ if ( pVBInfo->VGAHDE == 1024 )
+ tempax = ( tempax * 25 / 32 ) - 1 ;
+ else
+ tempax = ( tempax * 20 / 32 ) - 1 ;
+ }
+ }
+ }
+ else
+ {
+ if ( pVBInfo->VGAHDE > 800 )
+ {
+ if ( pVBInfo->VGAHDE == 1024 )
+ tempax = ( tempax * 25 / 32 ) - 1 ;
+ else
+ tempax = ( tempax * 20 / 32 ) - 1 ;
+ }
+ }
+ }
+*/
+
+ temp = ( tempax & 0xFF00 ) >> 8 ;
+ temp = ( ( temp & 0x0003 ) << 4 ) ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x1E , temp ) ;
+ temp = ( tempax & 0x00FF ) ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x1D , temp ) ;
+
+ if ( pVBInfo->VBInfo & ( SetCRT2ToTV | SetCRT2ToHiVisionTV ) )
+ {
+ if ( pVBInfo->VGAHDE > 800 )
+ {
+ XGINew_SetRegOR( pVBInfo->Part4Port , 0x1E , 0x08 ) ;
+ }
+ }
+ temp = 0x0036 ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ if ( !( pVBInfo->TVInfo & ( NTSC1024x768 | SetYPbPrMode525p | SetYPbPrMode750p | SetYPbPrMode1080i ) ) )
+ {
+ temp |= 0x0001 ;
+ if ( ( pVBInfo->VBInfo & SetInSlaveMode ) && ( !( pVBInfo->TVInfo & TVSimuMode ) ) )
+ temp &= ( ~0x0001 ) ;
+ }
+ }
+
+ XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x1F , 0x00C0 , temp ) ;
+ tempbx = pVBInfo->HT ;
+ if ( XGI_IsLCDDualLink( pVBInfo ) )
+ tempbx = tempbx >> 1 ;
+ tempbx = ( tempbx >> 1 ) - 2 ;
+ temp = ( ( tempbx & 0x0700 ) >> 8 ) << 3 ;
+ XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x21 , 0x00C0 , temp ) ;
+ temp = tempbx & 0x00FF ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x22 , temp ) ;
+ }
+ /* end 301b */
+
+ if ( pVBInfo->ISXPDOS == 0 )
+ XGI_SetCRT2VCLK( ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetGroup5 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetGroup5( USHORT ModeNo , USHORT ModeIdIndex , PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT Pindex ,
+ Pdata ;
+
+ Pindex = pVBInfo->Part5Port ;
+ Pdata = pVBInfo->Part5Port + 1 ;
+ if ( pVBInfo->ModeType == ModeVGA )
+ {
+ if ( !( pVBInfo->VBInfo & ( SetInSlaveMode | LoadDACFlag | CRT2DisplayFlag ) ) )
+ {
+ XGINew_EnableCRT2(pVBInfo) ;
+ /* LoadDAC2(pVBInfo->Part5Port,ModeNo,ModeIdIndex); */
+ }
+ }
+ return ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLcdPtr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void* XGI_GetLcdPtr( USHORT BX , USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT i ,
+ tempdx ,
+ tempcx ,
+ tempbx ,
+ tempal ,
+ modeflag ,
+ table ;
+
+ XGI330_LCDDataTablStruct *tempdi = 0 ;
+
+
+ tempbx = BX;
+
+ if ( ModeNo <= 0x13 )
+ {
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+ tempal = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ;
+ }
+ else
+ {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+ tempal = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT2CRTC ;
+ }
+
+ tempal = tempal & 0x0f ;
+
+ if ( tempbx <= 1 ) /* ExpLink */
+ {
+ if ( ModeNo <= 0x13 )
+ {
+ tempal = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ; /* find no Ext_CRT2CRTC2 */
+ }
+ else
+ {
+ tempal= pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT2CRTC ;
+ }
+
+ if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+ {
+ if ( ModeNo <= 0x13 )
+ tempal = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC2 ;
+ else
+ tempal= pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT2CRTC2 ;
+ }
+
+ if ( tempbx & 0x01 )
+ tempal = ( tempal >> 4 ) ;
+
+ tempal = ( tempal & 0x0f ) ;
+ }
+
+ tempcx = LCDLenList[ tempbx ] ; /* mov cl,byte ptr cs:LCDLenList[bx] */
+
+ if ( pVBInfo->LCDInfo & EnableScalingLCD ) /* ScaleLCD */
+ {
+ if ( ( tempbx == 5 ) || ( tempbx ) == 7 )
+ tempcx = LCDDesDataLen2 ;
+ else if ( ( tempbx == 3 ) || ( tempbx == 8 ) )
+ tempcx = LVDSDesDataLen2 ;
+ }
+ /* mov di, word ptr cs:LCDDataList[bx] */
+ /* tempdi=pVideoMemory[LCDDataList+tempbx*2]|(pVideoMemory[LCDDataList+tempbx*2+1]<<8); */
+
+ switch( tempbx )
+ {
+ case 0:
+ tempdi = XGI_EPLLCDCRT1Ptr_H ;
+ break ;
+ case 1:
+ tempdi = XGI_EPLLCDCRT1Ptr_V ;
+ break ;
+ case 2:
+ tempdi = XGI_EPLLCDDataPtr ;
+ break ;
+ case 3:
+ tempdi = XGI_EPLLCDDesDataPtr ;
+ break ;
+ case 4:
+ tempdi = XGI_LCDDataTable ;
+ break ;
+ case 5:
+ tempdi = XGI_LCDDesDataTable ;
+ break ;
+ case 6:
+ tempdi = XGI_EPLCHLCDRegPtr ;
+ break ;
+ case 7:
+ case 8:
+ case 9:
+ tempdi = 0 ;
+ break ;
+ default:
+ break ;
+ }
+
+ if ( tempdi == 0x00 ) /* OEMUtil */
+ return 0 ;
+
+ table = tempbx ;
+ i = 0 ;
+
+ while( tempdi[ i ].PANELID != 0xff )
+ {
+ tempdx = pVBInfo->LCDResInfo ;
+ if ( tempbx & 0x0080 ) /* OEMUtil */
+ {
+ tempbx &= ( ~0x0080 ) ;
+ tempdx = pVBInfo->LCDTypeInfo ;
+ }
+
+ if ( pVBInfo->LCDInfo & EnableScalingLCD )
+ tempdx &= ( ~PanelResInfo ) ;
+
+ if ( tempdi[ i ].PANELID == tempdx )
+ {
+ tempbx = tempdi[ i ].MASK ;
+ tempdx = pVBInfo->LCDInfo ;
+
+ if ( ModeNo <= 0x13 ) /* alan 09/10/2003 */
+ tempdx |= SetLCDStdMode ;
+
+ if ( modeflag & HalfDCLK )
+ tempdx |= SetLCDLowResolution ;
+
+ tempbx &= tempdx;
+ if ( tempbx == tempdi[ i ].CAP )
+ break ;
+ }
+ i++ ;
+ }
+
+ if ( table == 0 )
+ {
+ switch( tempdi[ i ].DATAPTR )
+ {
+ case 0:
+ return &XGI_LVDSCRT11024x768_1_H[ tempal ] ;
+ break ;
+ case 1:
+ return &XGI_LVDSCRT11024x768_2_H[ tempal ] ;
+ break ;
+ case 2:
+ return &XGI_LVDSCRT11280x1024_1_H[ tempal ] ;
+ break ;
+ case 3:
+ return &XGI_LVDSCRT11280x1024_2_H[ tempal ] ;
+ break ;
+ case 4:
+ return &XGI_LVDSCRT11400x1050_1_H[ tempal ] ;
+ break ;
+ case 5:
+ return &XGI_LVDSCRT11400x1050_2_H[ tempal ] ;
+ break ;
+ case 6:
+ return &XGI_LVDSCRT11600x1200_1_H[ tempal ] ;
+ break ;
+ case 7:
+ return &XGI_LVDSCRT11024x768_1_Hx75[ tempal ] ;
+ break ;
+ case 8:
+ return &XGI_LVDSCRT11024x768_2_Hx75[ tempal ] ;
+ break ;
+ case 9:
+ return &XGI_LVDSCRT11280x1024_1_Hx75[ tempal ] ;
+ break ;
+ case 10:
+ return &XGI_LVDSCRT11280x1024_2_Hx75[ tempal ] ;
+ break ;
+ default:
+ break ;
+ }
+ }
+ else if ( table == 1 )
+ {
+ switch( tempdi[ i ].DATAPTR )
+ {
+ case 0:
+ return &XGI_LVDSCRT11024x768_1_V[ tempal ] ;
+ break ;
+ case 1:
+ return &XGI_LVDSCRT11024x768_2_V[ tempal ] ;
+ break ;
+ case 2:
+ return &XGI_LVDSCRT11280x1024_1_V[ tempal ] ;
+ break ;
+ case 3:
+ return &XGI_LVDSCRT11280x1024_2_V[ tempal ] ;
+ break ;
+ case 4:
+ return &XGI_LVDSCRT11400x1050_1_V[ tempal ] ;
+ break ;
+ case 5:
+ return &XGI_LVDSCRT11400x1050_2_V[ tempal ] ;
+ break ;
+ case 6:
+ return &XGI_LVDSCRT11600x1200_1_V[ tempal ] ;
+ break ;
+ case 7:
+ return &XGI_LVDSCRT11024x768_1_Vx75[ tempal ] ;
+ break ;
+ case 8:
+ return &XGI_LVDSCRT11024x768_2_Vx75[ tempal ] ;
+ break ;
+ case 9:
+ return &XGI_LVDSCRT11280x1024_1_Vx75[ tempal ] ;
+ break ;
+ case 10:
+ return &XGI_LVDSCRT11280x1024_2_Vx75[ tempal ] ;
+ break ;
+ default:
+ break ;
+ }
+ }
+ else if ( table == 2 )
+ {
+ switch( tempdi[ i ].DATAPTR )
+ {
+ case 0:
+ return &XGI_LVDS1024x768Data_1[ tempal ] ;
+ break ;
+ case 1:
+ return &XGI_LVDS1024x768Data_2[ tempal ] ;
+ break ;
+ case 2:
+ return &XGI_LVDS1280x1024Data_1[ tempal ] ;
+ break ;
+ case 3:
+ return &XGI_LVDS1280x1024Data_2[ tempal ] ;
+ break ;
+ case 4:
+ return &XGI_LVDS1400x1050Data_1[ tempal ] ;
+ break ;
+ case 5:
+ return &XGI_LVDS1400x1050Data_2[ tempal ] ;
+ break ;
+ case 6:
+ return &XGI_LVDS1600x1200Data_1[ tempal ] ;
+ break ;
+ case 7:
+ return &XGI_LVDSNoScalingData[ tempal ] ;
+ break ;
+ case 8:
+ return &XGI_LVDS1024x768Data_1x75[ tempal ] ;
+ break ;
+ case 9:
+ return &XGI_LVDS1024x768Data_2x75[ tempal ] ;
+ break ;
+ case 10:
+ return &XGI_LVDS1280x1024Data_1x75[ tempal ] ;
+ break ;
+ case 11:
+ return &XGI_LVDS1280x1024Data_2x75[ tempal ] ;
+ break ;
+ case 12:
+ return &XGI_LVDSNoScalingDatax75[ tempal ] ;
+ break ;
+ default:
+ break ;
+ }
+ }
+ else if ( table == 3 )
+ {
+ switch( tempdi[ i ].DATAPTR )
+ {
+ case 0:
+ return &XGI_LVDS1024x768Des_1[ tempal ] ;
+ break ;
+ case 1:
+ return &XGI_LVDS1024x768Des_3[ tempal ] ;
+ break ;
+ case 2:
+ return &XGI_LVDS1024x768Des_2[ tempal ] ;
+ break ;
+ case 3:
+ return &XGI_LVDS1280x1024Des_1[ tempal ] ;
+ break ;
+ case 4:
+ return &XGI_LVDS1280x1024Des_2[ tempal ] ;
+ break ;
+ case 5:
+ return &XGI_LVDS1400x1050Des_1[ tempal ] ;
+ break ;
+ case 6:
+ return &XGI_LVDS1400x1050Des_2[ tempal ] ;
+ break ;
+ case 7:
+ return &XGI_LVDS1600x1200Des_1[ tempal ] ;
+ break ;
+ case 8:
+ return &XGI_LVDSNoScalingDesData[ tempal ] ;
+ break ;
+ case 9:
+ return &XGI_LVDS1024x768Des_1x75[ tempal ] ;
+ break ;
+ case 10:
+ return &XGI_LVDS1024x768Des_3x75[ tempal ] ;
+ break ;
+ case 11:
+ return &XGI_LVDS1024x768Des_2x75[ tempal ] ;
+ break;
+ case 12:
+ return &XGI_LVDS1280x1024Des_1x75[ tempal ] ;
+ break ;
+ case 13:
+ return &XGI_LVDS1280x1024Des_2x75[ tempal ] ;
+ break ;
+ case 14:
+ return &XGI_LVDSNoScalingDesDatax75[ tempal ] ;
+ break ;
+ default:
+ break ;
+ }
+ }
+ else if ( table == 4 )
+ {
+ switch( tempdi[ i ].DATAPTR )
+ {
+ case 0:
+ return &XGI_ExtLCD1024x768Data[ tempal ] ;
+ break ;
+ case 1:
+ return &XGI_StLCD1024x768Data[ tempal ] ;
+ break ;
+ case 2:
+ return &XGI_CetLCD1024x768Data[ tempal ] ;
+ break ;
+ case 3:
+ return &XGI_ExtLCD1280x1024Data[ tempal ] ;
+ break ;
+ case 4:
+ return &XGI_StLCD1280x1024Data[ tempal ] ;
+ break ;
+ case 5:
+ return &XGI_CetLCD1280x1024Data[ tempal ] ;
+ break ;
+ case 6:
+ return &XGI_ExtLCD1400x1050Data[ tempal ] ;
+ break ;
+ case 7:
+ return &XGI_StLCD1400x1050Data[ tempal ] ;
+ break ;
+ case 8:
+ return &XGI_CetLCD1400x1050Data[ tempal ] ;
+ break ;
+ case 9:
+ return &XGI_ExtLCD1600x1200Data[ tempal ] ;
+ break ;
+ case 10:
+ return &XGI_StLCD1600x1200Data[ tempal ] ;
+ break ;
+ case 11:
+ return &XGI_NoScalingData[ tempal ] ;
+ break ;
+ case 12:
+ return &XGI_ExtLCD1024x768x75Data[ tempal ] ;
+ break ;
+ case 13:
+ return &XGI_ExtLCD1024x768x75Data[ tempal ] ;
+ break ;
+ case 14:
+ return &XGI_CetLCD1024x768x75Data[ tempal ] ;
+ break ;
+ case 15:
+ return &XGI_ExtLCD1280x1024x75Data[ tempal ] ;
+ break ;
+ case 16:
+ return &XGI_StLCD1280x1024x75Data[ tempal ] ;
+ break;
+ case 17:
+ return &XGI_CetLCD1280x1024x75Data[ tempal ] ;
+ break;
+ case 18:
+ return &XGI_NoScalingDatax75[ tempal ] ;
+ break ;
+ default:
+ break ;
+ }
+ }
+ else if ( table == 5 )
+ {
+ switch( tempdi[ i ].DATAPTR )
+ {
+ case 0:
+ return &XGI_ExtLCDDes1024x768Data[ tempal ] ;
+ break ;
+ case 1:
+ return &XGI_StLCDDes1024x768Data[ tempal ] ;
+ break ;
+ case 2:
+ return &XGI_CetLCDDes1024x768Data[ tempal ] ;
+ break ;
+ case 3:
+ if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+ return &XGI_ExtLCDDLDes1280x1024Data[ tempal ] ;
+ else
+ return &XGI_ExtLCDDes1280x1024Data[ tempal ] ;
+ break ;
+ case 4:
+ if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+ return &XGI_StLCDDLDes1280x1024Data[ tempal ] ;
+ else
+ return &XGI_StLCDDes1280x1024Data[ tempal ] ;
+ break ;
+ case 5:
+ if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+ return &XGI_CetLCDDLDes1280x1024Data[ tempal ] ;
+ else
+ return &XGI_CetLCDDes1280x1024Data[ tempal ] ;
+ break ;
+ case 6:
+ if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+ return &XGI_ExtLCDDLDes1400x1050Data[ tempal ] ;
+ else
+ return &XGI_ExtLCDDes1400x1050Data[ tempal ] ;
+ break ;
+ case 7:
+ if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+ return &XGI_StLCDDLDes1400x1050Data[ tempal ] ;
+ else
+ return &XGI_StLCDDes1400x1050Data[ tempal ] ;
+ break ;
+ case 8:
+ return &XGI_CetLCDDes1400x1050Data[ tempal ] ;
+ break ;
+ case 9:
+ return &XGI_CetLCDDes1400x1050Data2[ tempal ] ;
+ break ;
+ case 10:
+ if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+ return &XGI_ExtLCDDLDes1600x1200Data[ tempal ] ;
+ else
+ return &XGI_ExtLCDDes1600x1200Data[ tempal ] ;
+ break ;
+ case 11:
+ if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+ return &XGI_StLCDDLDes1600x1200Data[ tempal ] ;
+ else
+ return &XGI_StLCDDes1600x1200Data[ tempal ] ;
+ break ;
+ case 12:
+ return &XGI_NoScalingDesData[ tempal ] ;
+ break;
+ case 13:
+ return &XGI_ExtLCDDes1024x768x75Data[ tempal ] ;
+ break ;
+ case 14:
+ return &XGI_StLCDDes1024x768x75Data[ tempal ] ;
+ break ;
+ case 15:
+ return &XGI_CetLCDDes1024x768x75Data[ tempal ] ;
+ break ;
+ case 16:
+ if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+ return &XGI_ExtLCDDLDes1280x1024x75Data[ tempal ] ;
+ else
+ return &XGI_ExtLCDDes1280x1024x75Data[ tempal ] ;
+ break ;
+ case 17:
+ if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+ return &XGI_StLCDDLDes1280x1024x75Data[ tempal ] ;
+ else
+ return &XGI_StLCDDes1280x1024x75Data[ tempal ] ;
+ break ;
+ case 18:
+ if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+ return &XGI_CetLCDDLDes1280x1024x75Data[ tempal ] ;
+ else
+ return &XGI_CetLCDDes1280x1024x75Data[ tempal ] ;
+ break ;
+ case 19:
+ return &XGI_NoScalingDesDatax75[ tempal ] ;
+ break ;
+ default:
+ break ;
+ }
+ }
+ else if ( table == 6 )
+ {
+ switch( tempdi[ i ].DATAPTR )
+ {
+ case 0:
+ return &XGI_CH7017LV1024x768[ tempal ] ;
+ break ;
+ case 1:
+ return &XGI_CH7017LV1400x1050[ tempal ] ;
+ break ;
+ default:
+ break ;
+ }
+ }
+ return 0 ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetTVPtr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void* XGI_GetTVPtr (USHORT BX,USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT i , tempdx , tempbx , tempal , modeflag , table ;
+ XGI330_TVDataTablStruct *tempdi = 0 ;
+
+ tempbx = BX ;
+
+ if ( ModeNo <= 0x13 )
+ {
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+ tempal = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ;
+ }
+ else
+ {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+ tempal = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT2CRTC ;
+ }
+
+ tempal = tempal & 0x3f ;
+ table = tempbx ;
+
+ switch( tempbx )
+ {
+ case 0:
+ tempdi = 0 ; /*EPLCHTVCRT1Ptr_H;*/
+ if ( pVBInfo->IF_DEF_CH7007 == 1 )
+ {
+ tempdi = XGI_EPLCHTVCRT1Ptr;
+ }
+ break ;
+ case 1:
+ tempdi = 0 ; /*EPLCHTVCRT1Ptr_V;*/
+ if ( pVBInfo->IF_DEF_CH7007 == 1 )
+ {
+ tempdi = XGI_EPLCHTVCRT1Ptr;
+ }
+ break ;
+ case 2:
+ tempdi = XGI_EPLCHTVDataPtr ;
+ break ;
+ case 3:
+ tempdi = 0 ;
+ break ;
+ case 4:
+ tempdi = XGI_TVDataTable ;
+ break ;
+ case 5:
+ tempdi = 0 ;
+ break ;
+ case 6:
+ tempdi = XGI_EPLCHTVRegPtr ;
+ break ;
+ default:
+ break ;
+ }
+
+ if ( tempdi == 0x00 ) /* OEMUtil */
+ return( 0 ) ;
+
+ tempdx = pVBInfo->TVInfo ;
+
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ tempdx = tempdx | SetTVLockMode ;
+
+ if ( modeflag & HalfDCLK )
+ tempdx = tempdx | SetTVLowResolution ;
+
+ i = 0 ;
+
+ while( tempdi[ i ].MASK != 0xffff )
+ {
+ if ( ( tempdx & tempdi[ i ].MASK ) == tempdi[ i ].CAP )
+ break ;
+ i++ ;
+ }
+
+ if ( table == 0x00 ) /* 07/05/22 */
+ {
+#ifdef WIN2000
+ if ( pVBInfo->IF_DEF_CH7007 == 1 )
+ {
+ switch( tempdi[ i ].DATAPTR )
+ {
+ case 0:
+ return &CH7007TVCRT1UNTSC_H[ tempal ] ;
+ break ;
+ case 1:
+ return &CH7007TVCRT1ONTSC_H[ tempal ] ;
+ break ;
+ case 2:
+ return &CH7007TVCRT1UPAL_H[ tempal ] ;
+ break ;
+ case 3:
+ return &CH7007TVCRT1OPAL_H[ tempal ] ;
+ break ;
+ default:
+ break ;
+ }
+ }
+#endif
+ }
+ else if ( table == 0x01 )
+ {
+#ifdef WIN2000
+ if ( pVBInfo->IF_DEF_CH7007 == 1 )
+ {
+ switch( tempdi[ i ].DATAPTR )
+ {
+ case 0:
+ return &CH7007TVCRT1UNTSC_V[ tempal ] ;
+ break ;
+ case 1:
+ return &CH7007TVCRT1ONTSC_V[ tempal ] ;
+ break ;
+ case 2:
+ return &CH7007TVCRT1UPAL_V[ tempal ] ;
+ break ;
+ case 3:
+ return &CH7007TVCRT1OPAL_V[ tempal ] ;
+ break ;
+ default:
+ break ;
+ }
+ }
+#endif
+ }
+ else if ( table == 0x04 )
+ {
+ switch( tempdi[ i ].DATAPTR )
+ {
+ case 0:
+ return &XGI_ExtPALData[ tempal ] ;
+ break ;
+ case 1:
+ return &XGI_ExtNTSCData[ tempal ] ;
+ break ;
+ case 2:
+ return &XGI_StPALData[ tempal ] ;
+ break ;
+ case 3:
+ return &XGI_StNTSCData[ tempal ] ;
+ break ;
+ case 4:
+ return &XGI_ExtHiTVData[ tempal ] ;
+ break ;
+ case 5:
+ return &XGI_St2HiTVData[ tempal ] ;
+ break ;
+ case 6:
+ return &XGI_ExtYPbPr525iData[ tempal ] ;
+ break ;
+ case 7:
+ return &XGI_ExtYPbPr525pData[ tempal ] ;
+ break ;
+ case 8:
+ return &XGI_ExtYPbPr750pData[ tempal ] ;
+ break ;
+ case 9:
+ return &XGI_StYPbPr525iData[ tempal ] ;
+ break ;
+ case 10:
+ return &XGI_StYPbPr525pData[ tempal ] ;
+ break ;
+ case 11:
+ return &XGI_StYPbPr750pData[ tempal ] ;
+ break;
+ case 12: /* avoid system hang */
+ return &XGI_ExtNTSCData[ tempal ] ;
+ break ;
+ case 13:
+ return &XGI_St1HiTVData[ tempal ] ;
+ break ;
+ default:
+ break ;
+ }
+ }
+ else if( table == 0x02 )
+ {
+ switch( tempdi[ i ].DATAPTR )
+ {
+ case 0:
+ return &XGI_CHTVUNTSCData[ tempal ] ;
+ break ;
+ case 1:
+ return &XGI_CHTVONTSCData[ tempal ] ;
+ break ;
+ case 2:
+ return &XGI_CHTVUPALData[ tempal ] ;
+ break ;
+ case 3:
+ return &XGI_CHTVOPALData[ tempal ] ;
+ break ;
+ default:
+ break ;
+ }
+ }
+ else if( table == 0x06 )
+ {
+#ifdef WIN2000
+ if ( pVBInfo->IF_DEF_CH7007 == 1 )
+ {
+ /* VideoDebugPrint((0, "XGI_GetTVPtr: pVBInfo->IF_DEF_CH7007==1\n")); */
+ switch( tempdi[ i ].DATAPTR )
+ {
+ case 0:
+ return &CH7007TVReg_UNTSC[ tempal ] ;
+ break ;
+ case 1:
+ return &CH7007TVReg_ONTSC[ tempal ] ;
+ break ;
+ case 2:
+ return &CH7007TVReg_UPAL[ tempal ] ;
+ break ;
+ case 3:
+ return &CH7007TVReg_OPAL[ tempal ] ;
+ break ;
+ default:
+ break ;
+ }
+ }
+ else
+ {
+ switch( tempdi[ i ].DATAPTR )
+ {
+ case 0:
+ return &XGI_CHTVRegUNTSC[ tempal ] ;
+ break ;
+ case 1:
+ return &XGI_CHTVRegONTSC[ tempal ] ;
+ break ;
+ case 2:
+ return &XGI_CHTVRegUPAL[ tempal ] ;
+ break ;
+ case 3:
+ return &XGI_CHTVRegOPAL[ tempal ] ;
+ break ;
+ default:
+ break ;
+ }
+ }
+#endif
+ }
+ return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_BacklightByDrv */
+/* Input : */
+/* Output : TRUE -> Skip backlight control */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_BacklightByDrv( PVB_DEVICE_INFO pVBInfo )
+{
+ UCHAR tempah ;
+
+ tempah = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x3A ) ;
+ if ( tempah & BacklightControlBit )
+ return TRUE ;
+ else
+ return FALSE ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_FirePWDDisable */
+/* Input : */
+/* Output : */
+/* Description : Turn off VDD & Backlight : Fire disable procedure */
+/* --------------------------------------------------------------------- */
+/*
+void XGI_FirePWDDisable( PVB_DEVICE_INFO pVBInfo )
+{
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x26 , 0x00 , 0xFC ) ;
+}
+*/
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_FirePWDEnable */
+/* Input : */
+/* Output : */
+/* Description : Turn on VDD & Backlight : Fire enable procedure */
+/* --------------------------------------------------------------------- */
+void XGI_FirePWDEnable(PVB_DEVICE_INFO pVBInfo )
+{
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x26 , 0x03 , 0xFC ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_EnableGatingCRT */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_EnableGatingCRT(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x63 , 0xBF , 0x40 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DisableGatingCRT */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_DisableGatingCRT(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x63 , 0xBF , 0x00 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetPanelDelay */
+/* Input : */
+/* Output : */
+/* Description : */
+/* I/P : bl : 1 ; T1 : the duration between CPL on and signal on */
+/* : bl : 2 ; T2 : the duration signal on and Vdd on */
+/* : bl : 3 ; T3 : the duration between CPL off and signal off */
+/* : bl : 4 ; T4 : the duration signal off and Vdd off */
+/* --------------------------------------------------------------------- */
+void XGI_SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT index ;
+
+ index = XGI_GetLCDCapPtr(pVBInfo) ;
+
+ if ( tempbl == 1 )
+ XGINew_LCD_Wait_Time( pVBInfo->LCDCapList[ index ].PSC_S1, pVBInfo ) ;
+
+ if ( tempbl == 2 )
+ XGINew_LCD_Wait_Time( pVBInfo->LCDCapList[ index ].PSC_S2, pVBInfo ) ;
+
+ if ( tempbl == 3 )
+ XGINew_LCD_Wait_Time( pVBInfo->LCDCapList[ index ].PSC_S3, pVBInfo ) ;
+
+ if ( tempbl == 4 )
+ XGINew_LCD_Wait_Time( pVBInfo->LCDCapList[ index ].PSC_S4, pVBInfo ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetPanelPower */
+/* Input : */
+/* Output : */
+/* Description : */
+/* I/O : ah = 0011b = 03h ; Backlight on, Power on */
+/* = 0111b = 07h ; Backlight on, Power off */
+/* = 1011b = 0Bh ; Backlight off, Power on */
+/* = 1111b = 0Fh ; Backlight off, Power off */
+/* --------------------------------------------------------------------- */
+void XGI_SetPanelPower(USHORT tempah,USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
+{
+ if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x26 , tempbl , tempah ) ;
+ else
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x11 , tempbl , tempah ) ;
+}
+
+UCHAR XG21GPIODataTransfer(UCHAR ujDate)
+{
+ UCHAR ujRet = 0;
+ UCHAR i = 0;
+
+ for (i=0; i<8; i++)
+ {
+ ujRet = ujRet << 1;
+ /* ujRet |= GETBITS(ujDate >> i, 0:0); */
+ ujRet |= (ujDate >> i) & 1;
+ }
+
+ return ujRet;
+}
+
+/*----------------------------------------------------------------------------*/
+/* output */
+/* bl[5] : LVDS signal */
+/* bl[1] : LVDS backlight */
+/* bl[0] : LVDS VDD */
+/*----------------------------------------------------------------------------*/
+UCHAR XGI_XG21GetPSCValue(PVB_DEVICE_INFO pVBInfo)
+{
+ UCHAR CR4A,temp;
+
+ CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+ XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x23 ) ; /* enable GPIO write */
+
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) ;
+
+ temp = XG21GPIODataTransfer(temp);
+ temp &= 0x23;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x4A , CR4A ) ;
+ return temp;
+}
+
+/*----------------------------------------------------------------------------*/
+/* output */
+/* bl[5] : LVDS signal */
+/* bl[1] : LVDS backlight */
+/* bl[0] : LVDS VDD */
+/*----------------------------------------------------------------------------*/
+UCHAR XGI_XG27GetPSCValue(PVB_DEVICE_INFO pVBInfo)
+{
+ UCHAR CR4A,CRB4,temp;
+
+ CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+ XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x0C ) ; /* enable GPIO write */
+
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) ;
+
+ temp &= 0x0C;
+ temp >>= 2;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x4A , CR4A ) ;
+ CRB4 = XGINew_GetReg1( pVBInfo->P3d4 , 0xB4 ) ;
+ temp |= ((CRB4&0x04)<<3);
+ return temp;
+}
+/*----------------------------------------------------------------------------*/
+/* input */
+/* bl[5] : 1;LVDS signal on */
+/* bl[1] : 1;LVDS backlight on */
+/* bl[0] : 1:LVDS VDD on */
+/* bh: 100000b : clear bit 5, to set bit5 */
+/* 000010b : clear bit 1, to set bit1 */
+/* 000001b : clear bit 0, to set bit0 */
+/*----------------------------------------------------------------------------*/
+void XGI_XG21BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
+{
+ UCHAR CR4A,temp;
+
+ CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+ tempbh &= 0x23;
+ tempbl &= 0x23;
+ XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~tempbh ) ; /* enable GPIO write */
+
+ if (tempbh&0x20)
+ {
+ temp = (tempbl>>4)&0x02;
+
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0xB4 , ~0x02 , temp) ; /* CR B4[1] */
+
+ }
+
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) ;
+
+ temp = XG21GPIODataTransfer(temp);
+ temp &= ~tempbh;
+ temp |= tempbl;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x48 , temp ) ;
+}
+
+void XGI_XG27BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
+{
+ UCHAR CR4A,temp;
+ USHORT tempbh0,tempbl0;
+
+ tempbh0 = tempbh;
+ tempbl0 = tempbl;
+ tempbh0 &= 0x20;
+ tempbl0 &= 0x20;
+ tempbh0 >>= 3;
+ tempbl0 >>= 3;
+
+ if (tempbh&0x20)
+ {
+ temp = (tempbl>>4)&0x02;
+
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0xB4 , ~0x02 , temp) ; /* CR B4[1] */
+
+ }
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0xB4 , ~tempbh0 , tempbl0 ) ;
+
+ CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+ tempbh &= 0x03;
+ tempbl &= 0x03;
+ tempbh <<= 2;
+ tempbl <<= 2; /* GPIOC,GPIOD */
+ XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~tempbh ) ; /* enable GPIO write */
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x48 , ~tempbh , tempbl ) ;
+}
+
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetLVDSOEMTableIndex(PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT index ;
+
+ index = XGINew_GetReg1( pVBInfo->P3d4 , 0x36 ) ;
+ if (index<sizeof(XGI21_LCDCapList)/sizeof(XGI21_LVDSCapStruct))
+ {
+ return index;
+ }
+ return 0;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_XG21SetPanelDelay */
+/* Input : */
+/* Output : */
+/* Description : */
+/* I/P : bl : 1 ; T1 : the duration between CPL on and signal on */
+/* : bl : 2 ; T2 : the duration signal on and Vdd on */
+/* : bl : 3 ; T3 : the duration between CPL off and signal off */
+/* : bl : 4 ; T4 : the duration signal off and Vdd off */
+/* --------------------------------------------------------------------- */
+void XGI_XG21SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT index ;
+
+ index = XGI_GetLVDSOEMTableIndex( pVBInfo );
+ if ( tempbl == 1 )
+ XGINew_LCD_Wait_Time( pVBInfo->XG21_LVDSCapList[ index ].PSC_S1, pVBInfo ) ;
+
+ if ( tempbl == 2 )
+ XGINew_LCD_Wait_Time( pVBInfo->XG21_LVDSCapList[ index ].PSC_S2, pVBInfo ) ;
+
+ if ( tempbl == 3 )
+ XGINew_LCD_Wait_Time( pVBInfo->XG21_LVDSCapList[ index ].PSC_S3, pVBInfo ) ;
+
+ if ( tempbl == 4 )
+ XGINew_LCD_Wait_Time( pVBInfo->XG21_LVDSCapList[ index ].PSC_S4, pVBInfo ) ;
+}
+
+BOOLEAN XGI_XG21CheckLVDSMode(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT xres ,
+ yres ,
+ colordepth ,
+ modeflag ,
+ resindex ,
+ lvdstableindex;
+
+ resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+ if ( ModeNo <= 0x13 )
+ {
+ xres = pVBInfo->StResInfo[ resindex ].HTotal ;
+ yres = pVBInfo->StResInfo[ resindex ].VTotal ;
+ modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; /* si+St_ResInfo */
+ }
+ else
+ {
+ xres = pVBInfo->ModeResInfo[ resindex ].HTotal ; /* xres->ax */
+ yres = pVBInfo->ModeResInfo[ resindex ].VTotal ; /* yres->bx */
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex].Ext_ModeFlag ; /* si+St_ModeFlag */
+ }
+
+ if ( !( modeflag & Charx8Dot ) )
+ {
+ xres /= 9;
+ xres *= 8;
+ }
+
+ if ( ModeNo > 0x13 )
+ {
+ if ( ( ModeNo>0x13 ) && ( modeflag & HalfDCLK ) )
+ {
+ xres *= 2 ;
+ }
+ if ( ( ModeNo>0x13 ) && ( modeflag & DoubleScanMode ) )
+ {
+ yres *= 2 ;
+ }
+ }
+
+ lvdstableindex = XGI_GetLVDSOEMTableIndex( pVBInfo );
+ if ( xres > (pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE) )
+ return FALSE;
+
+ if ( yres > (pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE) )
+ return FALSE;
+
+ if ( ModeNo > 0x13 )
+ {
+ if ( ( xres != (pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE) ) ||
+ ( yres != (pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE)) )
+ {
+ colordepth = XGI_GetColorDepth( ModeNo , ModeIdIndex, pVBInfo ) ;
+ if ( colordepth > 2 )
+ {
+ return FALSE;
+ }
+ }
+ }
+ return TRUE;
+}
+
+void XGI_SetXG21FPBits(PVB_DEVICE_INFO pVBInfo)
+{
+ UCHAR temp;
+
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x37 ) ; /* D[0] 1: 18bit */
+ temp = ( temp & 1 ) << 6;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x06 , ~0x40 , temp ) ; /* SR06[6] 18bit Dither */
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x09 , ~0xc0 , temp | 0x80 ) ; /* SR09[7] enable FP output, SR09[6] 1: sigle 18bits, 0: dual 12bits */
+
+}
+
+void XGI_SetXG27FPBits(PVB_DEVICE_INFO pVBInfo)
+{
+ UCHAR temp;
+
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x37 ) ; /* D[1:0] 01: 18bit, 00: dual 12, 10: single 24 */
+ temp = ( temp & 3 ) << 6;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x06 , ~0xc0 , temp & 0x80 ) ; /* SR06[7]0: dual 12/1: single 24 [6] 18bit Dither <= 0 h/w recommend */
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x09 , ~0xc0 , temp | 0x80 ) ; /* SR09[7] enable FP output, SR09[6] 1: sigle 18bits, 0: 24bits */
+
+}
+
+void XGI_SetXG21LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ UCHAR temp,Miscdata;
+ USHORT xres ,
+ yres ,
+ modeflag ,
+ resindex ,
+ lvdstableindex ;
+ USHORT LVDSHT,LVDSHBS,LVDSHRS,LVDSHRE,LVDSHBE;
+ USHORT LVDSVT,LVDSVBS,LVDSVRS,LVDSVRE,LVDSVBE;
+ USHORT value;
+
+ lvdstableindex = XGI_GetLVDSOEMTableIndex( pVBInfo );
+
+ temp = (UCHAR) ( ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability & (LCDPolarity << 8 ) ) >> 8 );
+ temp &= LCDPolarity;
+ Miscdata =(UCHAR) XGINew_GetReg2(pVBInfo->P3cc) ;
+
+ XGINew_SetReg3( pVBInfo->P3c2 , (Miscdata & 0x3F) | temp ) ;
+
+ temp = (UCHAR) ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability & LCDPolarity ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x80 , temp&0x80 ) ; /* SR35[7] FP VSync polarity */
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x30 , ~0x20 , (temp&0x40)>>1 ) ; /* SR30[5] FP HSync polarity */
+
+ XGI_SetXG21FPBits(pVBInfo);
+ resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+ if ( ModeNo <= 0x13 )
+ {
+ xres = pVBInfo->StResInfo[ resindex ].HTotal ;
+ yres = pVBInfo->StResInfo[ resindex ].VTotal ;
+ modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; /* si+St_ResInfo */
+ }
+ else
+ {
+ xres = pVBInfo->ModeResInfo[ resindex ].HTotal ; /* xres->ax */
+ yres = pVBInfo->ModeResInfo[ resindex ].VTotal ; /* yres->bx */
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex].Ext_ModeFlag ; /* si+St_ModeFlag */
+ }
+
+ if (!( modeflag & Charx8Dot ))
+ xres = xres * 8 / 9;
+
+ LVDSHT = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHT;
+
+ LVDSHBS = xres + ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE - xres ) / 2 ;
+ if ( ( ModeNo<=0x13 ) && ( modeflag & HalfDCLK ) )
+ {
+ LVDSHBS -= xres/4 ;
+ }
+ if (LVDSHBS > LVDSHT) LVDSHBS -= LVDSHT ;
+
+ LVDSHRS = LVDSHBS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHFP ;
+ if (LVDSHRS > LVDSHT) LVDSHRS -= LVDSHT ;
+
+ LVDSHRE = LVDSHRS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHSYNC ;
+ if (LVDSHRE > LVDSHT) LVDSHRE -= LVDSHT ;
+
+ LVDSHBE = LVDSHBS + LVDSHT - pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE ;
+
+ LVDSVT = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVT;
+
+ LVDSVBS = yres + ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE - yres ) / 2 ;
+ if ( ( ModeNo>0x13 ) && ( modeflag & DoubleScanMode ) )
+ {
+ LVDSVBS += yres/2 ;
+ }
+ if (LVDSVBS > LVDSVT) LVDSVBS -= LVDSVT ;
+
+ LVDSVRS = LVDSVBS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVFP ;
+ if (LVDSVRS > LVDSVT) LVDSVRS -= LVDSVT ;
+
+ LVDSVRE = LVDSVRS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVSYNC ;
+ if (LVDSVRE > LVDSVT) LVDSVRE -= LVDSVT ;
+
+ LVDSVBE = LVDSVBS + LVDSVT - pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE ;
+
+ temp = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , temp & 0x7f ) ; /* Unlock CRTC */
+
+ if (!( modeflag & Charx8Dot ))
+ {
+ XGINew_SetRegOR( pVBInfo->P3c4 , 0x1 , 0x1 ) ;
+ }
+
+ /* HT SR0B[1:0] CR00 */
+ value = ( LVDSHT >> 3 ) - 5;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0B , ~0x03 , ( value & 0x300 ) >> 8 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x0 , (value & 0xFF) ) ;
+
+ /* HBS SR0B[5:4] CR02 */
+ value = ( LVDSHBS >> 3 ) - 1;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0B , ~0x30 , ( value & 0x300 ) >> 4 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x2 , (value & 0xFF) ) ;
+
+ /* HBE SR0C[1:0] CR05[7] CR03[4:0] */
+ value = ( LVDSHBE >> 3 ) - 1;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0C , ~0x03 , ( value & 0xC0 ) >> 6 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x05 , ~0x80 , ( value & 0x20 ) << 2 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x03 , ~0x1F , value & 0x1F ) ;
+
+ /* HRS SR0B[7:6] CR04 */
+ value = ( LVDSHRS >> 3 ) + 2;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0B , ~0xC0 , ( value & 0x300 ) >> 2 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x4 , (value & 0xFF) ) ;
+
+ /* Panel HRS SR2F[1:0] SR2E[7:0] */
+ value--;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x2F , ~0x03 , ( value & 0x300 ) >> 8 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , (value & 0xFF) ) ;
+
+ /* HRE SR0C[2] CR05[4:0] */
+ value = ( LVDSHRE >> 3 ) + 2;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0C , ~0x04 , ( value & 0x20 ) >> 3 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x05 , ~0x1F , value & 0x1F ) ;
+
+ /* Panel HRE SR2F[7:2] */
+ value--;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x2F , ~0xFC , value << 2 ) ;
+
+ /* VT SR0A[0] CR07[5][0] CR06 */
+ value = LVDSVT - 2 ;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x01 , ( value & 0x400 ) >> 10 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x20 , ( value & 0x200 ) >> 4 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x01 , ( value & 0x100 ) >> 8 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x06 , (value & 0xFF) ) ;
+
+ /* VBS SR0A[2] CR09[5] CR07[3] CR15 */
+ value = LVDSVBS - 1 ;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x04 , ( value & 0x400 ) >> 8 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x09 , ~0x20 , ( value & 0x200 ) >> 4 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x08 , ( value & 0x100 ) >> 5 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x15 , (value & 0xFF) ) ;
+
+ /* VBE SR0A[4] CR16 */
+ value = LVDSVBE - 1;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x10 , ( value & 0x100 ) >> 4 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x16 , (value & 0xFF) ) ;
+
+ /* VRS SR0A[3] CR7[7][2] CR10 */
+ value = LVDSVRS - 1 ;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x08 , ( value & 0x400 ) >> 7 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x80 , ( value & 0x200 ) >> 2 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x04 , ( value & 0x100 ) >> 6 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x10 , (value & 0xFF) ) ;
+
+ /* Panel VRS SR3F[1:0] SR34[7:0] SR33[0] */
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x3F , ~0x03 , ( value & 0x600 ) >> 9 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , (value >> 1) & 0xFF ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x33 , ~0x01 , value & 0x01 ) ;
+
+ /* VRE SR0A[5] CR11[3:0] */
+ value = LVDSVRE - 1;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x20 , ( value & 0x10 ) << 1 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x11 , ~0x0F , value & 0x0F ) ;
+
+ /* Panel VRE SR3F[7:2] */ /* SR3F[7] has to be 0, h/w bug */
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x3F , ~0xFC , ( value << 2 ) & 0x7C ) ;
+
+ for ( temp=0, value = 0; temp < 3; temp++)
+ {
+
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x31 , ~0x30 , value ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , pVBInfo->XG21_LVDSCapList[lvdstableindex].VCLKData1) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , pVBInfo->XG21_LVDSCapList[lvdstableindex].VCLKData2) ;
+ value += 0x10;
+ }
+
+ if (!( modeflag & Charx8Dot ))
+ {
+ XGINew_GetReg2( pVBInfo->P3da ) ; /* reset 3da */
+ XGINew_SetReg3( pVBInfo->P3c0 , 0x13 ) ; /* set index */
+ XGINew_SetReg3( pVBInfo->P3c0 , 0x00 ) ; /* set data, panning = 0, shift left 1 dot*/
+
+ XGINew_GetReg2( pVBInfo->P3da ) ; /* Enable Attribute */
+ XGINew_SetReg3( pVBInfo->P3c0 , 0x20 ) ;
+
+ XGINew_GetReg2( pVBInfo->P3da ) ; /* reset 3da */
+ }
+
+
+}
+
+/* no shadow case */
+void XGI_SetXG27LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ UCHAR temp,Miscdata;
+ USHORT xres ,
+ yres ,
+ modeflag ,
+ resindex ,
+ lvdstableindex ;
+ USHORT LVDSHT,LVDSHBS,LVDSHRS,LVDSHRE,LVDSHBE;
+ USHORT LVDSVT,LVDSVBS,LVDSVRS,LVDSVRE,LVDSVBE;
+ USHORT value;
+
+ lvdstableindex = XGI_GetLVDSOEMTableIndex( pVBInfo );
+ temp = (UCHAR) ( ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability & (LCDPolarity << 8 ) ) >> 8 );
+ temp &= LCDPolarity;
+ Miscdata =(UCHAR) XGINew_GetReg2(pVBInfo->P3cc) ;
+
+ XGINew_SetReg3( pVBInfo->P3c2 , (Miscdata & 0x3F) | temp ) ;
+
+ temp = (UCHAR) ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability & LCDPolarity ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x80 , temp&0x80 ) ; /* SR35[7] FP VSync polarity */
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x30 , ~0x20 , (temp&0x40)>>1 ) ; /* SR30[5] FP HSync polarity */
+
+ XGI_SetXG27FPBits(pVBInfo);
+ resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+ if ( ModeNo <= 0x13 )
+ {
+ xres = pVBInfo->StResInfo[ resindex ].HTotal ;
+ yres = pVBInfo->StResInfo[ resindex ].VTotal ;
+ modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; /* si+St_ResInfo */
+ }
+ else
+ {
+ xres = pVBInfo->ModeResInfo[ resindex ].HTotal ; /* xres->ax */
+ yres = pVBInfo->ModeResInfo[ resindex ].VTotal ; /* yres->bx */
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex].Ext_ModeFlag ; /* si+St_ModeFlag */
+ }
+
+ if (!( modeflag & Charx8Dot ))
+ xres = xres * 8 / 9;
+
+ LVDSHT = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHT;
+
+ LVDSHBS = xres + ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE - xres ) / 2 ;
+ if ( ( ModeNo<=0x13 ) && ( modeflag & HalfDCLK ) )
+ {
+ LVDSHBS -= xres/4 ;
+ }
+ if (LVDSHBS > LVDSHT) LVDSHBS -= LVDSHT ;
+
+ LVDSHRS = LVDSHBS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHFP ;
+ if (LVDSHRS > LVDSHT) LVDSHRS -= LVDSHT ;
+
+ LVDSHRE = LVDSHRS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHSYNC ;
+ if (LVDSHRE > LVDSHT) LVDSHRE -= LVDSHT ;
+
+ LVDSHBE = LVDSHBS + LVDSHT - pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE ;
+
+ LVDSVT = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVT;
+
+ LVDSVBS = yres + ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE - yres ) / 2 ;
+ if ( ( ModeNo>0x13 ) && ( modeflag & DoubleScanMode ) )
+ {
+ LVDSVBS += yres/2 ;
+ }
+ if (LVDSVBS > LVDSVT) LVDSVBS -= LVDSVT ;
+
+ LVDSVRS = LVDSVBS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVFP ;
+ if (LVDSVRS > LVDSVT) LVDSVRS -= LVDSVT ;
+
+ LVDSVRE = LVDSVRS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVSYNC ;
+ if (LVDSVRE > LVDSVT) LVDSVRE -= LVDSVT ;
+
+ LVDSVBE = LVDSVBS + LVDSVT - pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE ;
+
+ temp = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , temp & 0x7f ) ; /* Unlock CRTC */
+
+ if (!( modeflag & Charx8Dot ))
+ {
+ XGINew_SetRegOR( pVBInfo->P3c4 , 0x1 , 0x1 ) ;
+ }
+
+ /* HT SR0B[1:0] CR00 */
+ value = ( LVDSHT >> 3 ) - 5;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0B , ~0x03 , ( value & 0x300 ) >> 8 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x0 , (value & 0xFF) ) ;
+
+ /* HBS SR0B[5:4] CR02 */
+ value = ( LVDSHBS >> 3 ) - 1;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0B , ~0x30 , ( value & 0x300 ) >> 4 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x2 , (value & 0xFF) ) ;
+
+ /* HBE SR0C[1:0] CR05[7] CR03[4:0] */
+ value = ( LVDSHBE >> 3 ) - 1;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0C , ~0x03 , ( value & 0xC0 ) >> 6 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x05 , ~0x80 , ( value & 0x20 ) << 2 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x03 , ~0x1F , value & 0x1F ) ;
+
+ /* HRS SR0B[7:6] CR04 */
+ value = ( LVDSHRS >> 3 ) + 2;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0B , ~0xC0 , ( value & 0x300 ) >> 2 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x4 , (value & 0xFF) ) ;
+
+ /* Panel HRS SR2F[1:0] SR2E[7:0] */
+ value--;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x2F , ~0x03 , ( value & 0x300 ) >> 8 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , (value & 0xFF) ) ;
+
+ /* HRE SR0C[2] CR05[4:0] */
+ value = ( LVDSHRE >> 3 ) + 2;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0C , ~0x04 , ( value & 0x20 ) >> 3 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x05 , ~0x1F , value & 0x1F ) ;
+
+ /* Panel HRE SR2F[7:2] */
+ value--;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x2F , ~0xFC , value << 2 ) ;
+
+ /* VT SR0A[0] CR07[5][0] CR06 */
+ value = LVDSVT - 2 ;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x01 , ( value & 0x400 ) >> 10 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x20 , ( value & 0x200 ) >> 4 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x01 , ( value & 0x100 ) >> 8 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x06 , (value & 0xFF) ) ;
+
+ /* VBS SR0A[2] CR09[5] CR07[3] CR15 */
+ value = LVDSVBS - 1 ;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x04 , ( value & 0x400 ) >> 8 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x09 , ~0x20 , ( value & 0x200 ) >> 4 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x08 , ( value & 0x100 ) >> 5 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x15 , (value & 0xFF) ) ;
+
+ /* VBE SR0A[4] CR16 */
+ value = LVDSVBE - 1;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x10 , ( value & 0x100 ) >> 4 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x16 , (value & 0xFF) ) ;
+
+ /* VRS SR0A[3] CR7[7][2] CR10 */
+ value = LVDSVRS - 1 ;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x08 , ( value & 0x400 ) >> 7 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x80 , ( value & 0x200 ) >> 2 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x04 , ( value & 0x100 ) >> 6 ) ;
+ XGINew_SetReg1( pVBInfo->P3d4 , 0x10 , (value & 0xFF) ) ;
+
+ /* Panel VRS SR35[2:0] SR34[7:0] */
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x07 , ( value & 0x700 ) >> 8 ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , value & 0xFF ) ;
+
+ /* VRE SR0A[5] CR11[3:0] */
+ value = LVDSVRE - 1;
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x20 , ( value & 0x10 ) << 1 ) ;
+ XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x11 , ~0x0F , value & 0x0F ) ;
+
+ /* Panel VRE SR3F[7:2] */
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x3F , ~0xFC , ( value << 2 ) & 0xFC ) ;
+
+ for ( temp=0, value = 0; temp < 3; temp++)
+ {
+
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x31 , ~0x30 , value ) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , pVBInfo->XG21_LVDSCapList[lvdstableindex].VCLKData1) ;
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , pVBInfo->XG21_LVDSCapList[lvdstableindex].VCLKData2) ;
+ value += 0x10;
+ }
+
+ if (!( modeflag & Charx8Dot ))
+ {
+ XGINew_GetReg2( pVBInfo->P3da ) ; /* reset 3da */
+ XGINew_SetReg3( pVBInfo->P3c0 , 0x13 ) ; /* set index */
+ XGINew_SetReg3( pVBInfo->P3c0 , 0x00 ) ; /* set data, panning = 0, shift left 1 dot*/
+
+ XGINew_GetReg2( pVBInfo->P3da ) ; /* Enable Attribute */
+ XGINew_SetReg3( pVBInfo->P3c0 , 0x20 ) ;
+
+ XGINew_GetReg2( pVBInfo->P3da ) ; /* reset 3da */
+ }
+
+
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_IsLCDON */
+/* Input : */
+/* Output : FALSE : Skip PSC Control */
+/* TRUE: Disable PSC */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_IsLCDON(PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT tempax ;
+
+ tempax = pVBInfo->VBInfo ;
+ if ( tempax & SetCRT2ToDualEdge )
+ return FALSE ;
+ else if ( tempax & ( DisableCRT2Display | SwitchToCRT2 | SetSimuScanMode ) )
+ return TRUE ;
+
+ return FALSE ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_EnablePWD */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_EnablePWD( PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT index ,
+ temp ;
+
+ index = XGI_GetLCDCapPtr(pVBInfo) ;
+ temp = pVBInfo->LCDCapList[ index ].PWD_2B ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x2B , temp ) ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x2C , pVBInfo->LCDCapList[ index ].PWD_2C ) ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x2D , pVBInfo->LCDCapList[ index ].PWD_2D ) ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x2E , pVBInfo->LCDCapList[ index ].PWD_2E ) ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x2F , pVBInfo->LCDCapList[ index ].PWD_2F ) ;
+ XGINew_SetRegOR( pVBInfo->Part4Port , 0x27 , 0x80 ) ; /* enable PWD */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DisablePWD */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_DisablePWD( PVB_DEVICE_INFO pVBInfo )
+{
+ XGINew_SetRegAND( pVBInfo->Part4Port , 0x27 , 0x7F ) ; /* disable PWD */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DisableChISLCD */
+/* Input : */
+/* Output : FALSE -> Not LCD Mode */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_DisableChISLCD(PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT tempbx ,
+ tempah ;
+
+ tempbx = pVBInfo->SetFlag & ( DisableChA | DisableChB ) ;
+ tempah = ~( ( USHORT )XGINew_GetReg1( pVBInfo->Part1Port , 0x2E ) ) ;
+
+ if ( tempbx & ( EnableChA | DisableChA ) )
+ {
+ if ( !( tempah & 0x08 ) ) /* Chk LCDA Mode */
+ return FALSE ;
+ }
+
+ if ( !( tempbx & ( EnableChB | DisableChB ) ) )
+ return FALSE ;
+
+ if ( tempah & 0x01 ) /* Chk LCDB Mode */
+ return TRUE ;
+
+ return FALSE ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_EnableChISLCD */
+/* Input : */
+/* Output : 0 -> Not LCD mode */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_EnableChISLCD(PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT tempbx ,
+ tempah ;
+
+
+ tempbx = pVBInfo->SetFlag & ( EnableChA | EnableChB ) ;
+ tempah = ~( ( USHORT )XGINew_GetReg1( pVBInfo->Part1Port , 0x2E ) ) ;
+
+ if ( tempbx & ( EnableChA | DisableChA ) )
+ {
+ if ( !( tempah & 0x08 ) ) /* Chk LCDA Mode */
+ return FALSE ;
+ }
+
+ if ( !( tempbx & ( EnableChB | DisableChB ) ) )
+ return FALSE ;
+
+ if ( tempah & 0x01 ) /* Chk LCDB Mode */
+ return TRUE ;
+
+ return FALSE ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLCDCapPtr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetLCDCapPtr( PVB_DEVICE_INFO pVBInfo )
+{
+ UCHAR tempal ,
+ tempah ,
+ tempbl ,
+ i ;
+
+ tempah = XGINew_GetReg1( pVBInfo->P3d4 , 0x36 ) ;
+ tempal = tempah & 0x0F ;
+ tempah = tempah & 0xF0 ;
+ i = 0 ;
+ tempbl = pVBInfo->LCDCapList[ i ].LCD_ID ;
+
+ while( tempbl != 0xFF )
+ {
+ if ( tempbl & 0x80 ) /* OEMUtil */
+ {
+ tempal = tempah ;
+ tempbl = tempbl & ~( 0x80 ) ;
+ }
+
+ if ( tempal == tempbl )
+ break ;
+
+ i++ ;
+
+ tempbl = pVBInfo->LCDCapList[ i ].LCD_ID ;
+ }
+
+ return i ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLCDCapPtr1 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetLCDCapPtr1( PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT tempah ,
+ tempal ,
+ tempbl ,
+ i ;
+
+ tempal = pVBInfo->LCDResInfo ;
+ tempah = pVBInfo->LCDTypeInfo ;
+
+ i = 0 ;
+ tempbl = pVBInfo->LCDCapList[ i ].LCD_ID;
+
+ while( tempbl != 0xFF )
+ {
+ if ( ( tempbl & 0x80 ) && ( tempbl != 0x80 ) )
+ {
+ tempal = tempah ;
+ tempbl &= ~0x80 ;
+ }
+
+ if ( tempal == tempbl )
+ break ;
+
+ i++ ;
+ tempbl = pVBInfo->LCDCapList[ i ].LCD_ID ;
+ }
+
+ if ( tempbl == 0xFF )
+ {
+ pVBInfo->LCDResInfo = Panel1024x768 ;
+ pVBInfo->LCDTypeInfo = 0 ;
+ i = 0 ;
+ }
+
+ return i ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLCDSync */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetLCDSync( USHORT* HSyncWidth , USHORT* VSyncWidth, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT Index ;
+
+ Index = XGI_GetLCDCapPtr(pVBInfo) ;
+ *HSyncWidth = pVBInfo->LCDCapList[ Index ].LCD_HSyncWidth ;
+ *VSyncWidth = pVBInfo->LCDCapList[ Index ].LCD_VSyncWidth ;
+
+ return ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_EnableBridge */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_EnableBridge( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT tempbl ,
+ tempah ;
+
+ if ( pVBInfo->SetFlag == Win9xDOSMode )
+ {
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ XGI_DisplayOn( HwDeviceExtension, pVBInfo) ;
+ return ;
+ }
+ else /* LVDS or CH7017 */
+ return ;
+ }
+
+
+ if ( HwDeviceExtension->jChipType < XG40 )
+ {
+ if ( !XGI_DisableChISLCD(pVBInfo) )
+ {
+ if ( ( XGI_EnableChISLCD(pVBInfo) ) || ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) )
+ {
+ if ( pVBInfo->LCDInfo & SetPWDEnable )
+ {
+ XGI_EnablePWD( pVBInfo);
+ }
+ else
+ {
+ pVBInfo->LCDInfo &= ( ~SetPWDEnable ) ;
+ if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ tempbl = 0xFD ;
+ tempah = 0x02 ;
+ }
+ else
+ {
+ tempbl = 0xFB ;
+ tempah = 0x00 ;
+ }
+
+ XGI_SetPanelPower( tempah , tempbl, pVBInfo ) ;
+ XGI_SetPanelDelay( 1,pVBInfo ) ;
+ }
+ }
+ }
+ } /* Not 340 */
+
+
+
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ if ( !( pVBInfo->SetFlag & DisableChA ) )
+ {
+ if ( pVBInfo->SetFlag & EnableChA )
+ {
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x1E , 0x20 ) ; /* Power on */
+ }
+ else
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToDualEdge ) /* SetCRT2ToLCDA ) */
+ {
+ XGINew_SetReg1(pVBInfo->Part1Port,0x1E,0x20); /* Power on */
+ }
+ }
+ }
+
+ if ( !( pVBInfo->SetFlag & DisableChB ) )
+ {
+ if ( ( pVBInfo->SetFlag & EnableChB ) || ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToTV | SetCRT2ToRAMDAC ) ) )
+ {
+ tempah = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x32 ) ;
+ tempah &= 0xDF;
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ {
+ if ( !( pVBInfo->VBInfo & SetCRT2ToRAMDAC ) )
+ tempah |= 0x20 ;
+ }
+ XGINew_SetReg1( pVBInfo->P3c4 , 0x32 , tempah ) ;
+ XGINew_SetRegOR( pVBInfo->P3c4 , 0x1E , 0x20 ) ;
+
+
+ tempah = ( UCHAR )XGINew_GetReg1( pVBInfo->Part1Port , 0x2E ) ;
+
+ if ( !( tempah & 0x80 ) )
+ XGINew_SetRegOR( pVBInfo->Part1Port , 0x2E , 0x80 ) ; /* BVBDOENABLE = 1 */
+
+ XGINew_SetRegAND( pVBInfo->Part1Port , 0x00 , 0x7F ) ; /* BScreenOFF = 0 */
+ }
+ }
+
+ if ( ( pVBInfo->SetFlag & ( EnableChA | EnableChB ) ) || ( !( pVBInfo->VBInfo & DisableCRT2Display ) ) )
+ {
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x00 , ~0xE0 , 0x20 ) ; /* shampoo 0129 */
+ if ( pVBInfo->VBType & ( VB_XGI302LV | VB_XGI301C ) )
+ {
+ if ( !XGI_DisableChISLCD(pVBInfo) )
+ {
+ if ( XGI_EnableChISLCD( pVBInfo) || ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) )
+ XGINew_SetRegAND( pVBInfo->Part4Port ,0x2A , 0x7F ) ; /* LVDS PLL power on */
+ }
+ XGINew_SetRegAND( pVBInfo->Part4Port , 0x30 , 0x7F ) ; /* LVDS Driver power on */
+ }
+ }
+
+ tempah = 0x00 ;
+
+ if ( !( pVBInfo->VBInfo & DisableCRT2Display ) )
+ {
+ tempah = 0xc0 ;
+
+ if ( !( pVBInfo->VBInfo & SetSimuScanMode ) )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToDualEdge )
+ {
+ tempah = tempah & 0x40;
+ if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+ tempah = tempah ^ 0xC0 ;
+
+ if ( pVBInfo->SetFlag & DisableChB )
+ tempah &= 0xBF ;
+
+ if ( pVBInfo->SetFlag & DisableChA )
+ tempah &= 0x7F ;
+
+ if ( pVBInfo->SetFlag & EnableChB )
+ tempah |= 0x40 ;
+
+ if ( pVBInfo->SetFlag & EnableChA )
+ tempah |= 0x80 ;
+ }
+ }
+ }
+ }
+
+ XGINew_SetRegOR( pVBInfo->Part4Port , 0x1F , tempah ) ; /* EnablePart4_1F */
+
+ if ( pVBInfo->SetFlag & Win9xDOSMode )
+ {
+ XGI_DisplayOn( HwDeviceExtension, pVBInfo) ;
+ return ;
+ }
+
+ if ( !( pVBInfo->SetFlag & DisableChA ) )
+ {
+ XGI_VBLongWait( pVBInfo) ;
+ if ( !( pVBInfo->SetFlag & GatingCRT ) )
+ {
+ XGI_DisableGatingCRT( HwDeviceExtension, pVBInfo ) ;
+ XGI_DisplayOn( HwDeviceExtension, pVBInfo) ;
+ XGI_VBLongWait( pVBInfo) ;
+ }
+ }
+ } /* 301 */
+ else /* LVDS */
+ {
+ if ( pVBInfo->VBInfo & ( SetCRT2ToTV | SetCRT2ToLCD | SetCRT2ToLCDA ) )
+ XGINew_SetRegOR( pVBInfo->Part1Port , 0x1E , 0x20 ) ; /* enable CRT2 */
+
+
+
+ tempah = ( UCHAR )XGINew_GetReg1( pVBInfo->Part1Port , 0x2E ) ;
+ if ( !( tempah & 0x80 ) )
+ XGINew_SetRegOR( pVBInfo->Part1Port , 0x2E , 0x80 ) ; /* BVBDOENABLE = 1 */
+
+ XGINew_SetRegAND(pVBInfo->Part1Port,0x00,0x7F);
+ XGI_DisplayOn( HwDeviceExtension, pVBInfo);
+ } /* End of VB */
+
+
+ if ( HwDeviceExtension->jChipType < XG40 )
+ {
+ if ( !XGI_EnableChISLCD(pVBInfo) )
+ {
+ if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+ {
+ if ( XGI_BacklightByDrv(pVBInfo) )
+ return ;
+ }
+ else
+ return ;
+ }
+
+ if ( pVBInfo->LCDInfo & SetPWDEnable )
+ {
+ XGI_FirePWDEnable(pVBInfo) ;
+ return ;
+ }
+
+ XGI_SetPanelDelay( 2,pVBInfo ) ;
+
+ if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ tempah = 0x01 ;
+ tempbl = 0xFE ; /* turn on backlght */
+ }
+ else
+ {
+ tempbl = 0xF7 ;
+ tempah = 0x00 ;
+ }
+ XGI_SetPanelPower( tempah , tempbl , pVBInfo) ;
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DisableBridge */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_DisableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT tempax ,
+ tempbx ,
+ tempah = 0 ,
+ tempbl = 0 ;
+
+ if ( pVBInfo->SetFlag == Win9xDOSMode )
+ return ;
+
+
+ if ( HwDeviceExtension->jChipType < XG40 )
+ {
+ if ( ( !( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) ) || ( XGI_DisableChISLCD(pVBInfo) ) )
+ {
+ if ( !XGI_IsLCDON(pVBInfo) )
+ {
+ if ( pVBInfo->LCDInfo & SetPWDEnable )
+ XGI_EnablePWD( pVBInfo) ;
+ else
+ {
+ pVBInfo->LCDInfo &= ~SetPWDEnable ;
+ XGI_DisablePWD(pVBInfo) ;
+ if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ tempbx = 0xFE ; /* not 01h */
+ tempax = 0 ;
+ }
+ else
+ {
+ tempbx = 0xF7 ; /* not 08h */
+ tempax = 0x08 ;
+ }
+ XGI_SetPanelPower( tempax , tempbx , pVBInfo) ;
+ XGI_SetPanelDelay( 3,pVBInfo ) ;
+ }
+ } /* end if(!XGI_IsLCDON(pVBInfo)) */
+ }
+ }
+
+/* if ( CH7017 )
+ {
+ if ( !( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2toLCDA ) ) || ( XGI_DisableChISLCD(pVBInfo) ) )
+ {
+ if ( !XGI_IsLCDON(pVBInfo) )
+ {
+ if ( DISCHARGE )
+ {
+ tempbx = XGINew_GetCH7005( 0x61 ) ;
+ if ( tempbx < 0x01 ) //first time we power up
+ XGINew_SetCH7005( 0x0066 ) ; //and disable power sequence
+ else
+ XGINew_SetCH7005( 0x5f66 ) ; //leave VDD on - disable power
+ }
+ }
+ }
+ } */
+
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B| VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ tempah = 0x3F ;
+ if ( !( pVBInfo->VBInfo & ( DisableCRT2Display | SetSimuScanMode ) ) )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToDualEdge )
+ {
+ tempah = 0x7F; /* Disable Channel A */
+ if ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) )
+ tempah = 0xBF ; /* Disable Channel B */
+
+ if ( pVBInfo->SetFlag & DisableChB )
+ tempah &= 0xBF ; /* force to disable Cahnnel */
+
+ if ( pVBInfo->SetFlag & DisableChA )
+ tempah &= 0x7F ; /* Force to disable Channel B */
+ }
+ }
+ }
+
+ XGINew_SetRegAND( pVBInfo->Part4Port , 0x1F , tempah ) ; /* disable part4_1f */
+
+ if ( pVBInfo->VBType & ( VB_XGI302LV | VB_XGI301C ) )
+ {
+ if ( ( ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) ) || ( XGI_DisableChISLCD(pVBInfo) ) || ( XGI_IsLCDON(pVBInfo) ) )
+ XGINew_SetRegOR( pVBInfo->Part4Port , 0x30 , 0x80 ) ; /* LVDS Driver power down */
+ }
+
+ if ( ( pVBInfo->SetFlag & DisableChA ) || ( pVBInfo->VBInfo & ( DisableCRT2Display | SetCRT2ToLCDA | SetSimuScanMode ) ) )
+ {
+ if ( pVBInfo->SetFlag & GatingCRT )
+ XGI_EnableGatingCRT( HwDeviceExtension, pVBInfo ) ;
+ XGI_DisplayOff( HwDeviceExtension, pVBInfo) ;
+ }
+
+ if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+ {
+ if ( ( pVBInfo->SetFlag & DisableChA ) || ( pVBInfo->VBInfo & SetCRT2ToLCDA ) )
+ XGINew_SetRegAND( pVBInfo->Part1Port , 0x1e , 0xdf ) ; /* Power down */
+ }
+
+ XGINew_SetRegAND( pVBInfo->P3c4 , 0x32 , 0xdf ) ; /* disable TV as primary VGA swap */
+
+ if ( ( pVBInfo->VBInfo & ( SetSimuScanMode | SetCRT2ToDualEdge ) ) )
+ XGINew_SetRegAND(pVBInfo->Part2Port,0x00,0xdf);
+
+ if ( ( pVBInfo->SetFlag & DisableChB ) || ( pVBInfo->VBInfo & ( DisableCRT2Display | SetSimuScanMode ) )
+ || ( ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) ) && ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToLCD | SetCRT2ToTV ) ) ) )
+ XGINew_SetRegOR( pVBInfo->Part1Port , 0x00 , 0x80 ) ; /* BScreenOff=1 */
+
+ if ( ( pVBInfo->SetFlag & DisableChB ) || ( pVBInfo->VBInfo & ( DisableCRT2Display | SetSimuScanMode ) )
+ || ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) ) || ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToLCD | SetCRT2ToTV ) ) )
+ {
+ tempah= XGINew_GetReg1( pVBInfo->Part1Port , 0x00 ) ; /* save Part1 index 0 */
+ XGINew_SetRegOR( pVBInfo->Part1Port , 0x00 , 0x10 ) ; /* BTDAC = 1, avoid VB reset */
+ XGINew_SetRegAND( pVBInfo->Part1Port , 0x1E , 0xDF ) ; /* disable CRT2 */
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x00 , tempah ) ; /* restore Part1 index 0 */
+ }
+ }
+ else /* {301} */
+ {
+ if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToTV ) )
+ {
+ XGINew_SetRegOR( pVBInfo->Part1Port , 0x00 , 0x80 ) ; /* BScreenOff=1 */
+ XGINew_SetRegAND( pVBInfo->Part1Port , 0x1E , 0xDF ) ; /* Disable CRT2 */
+ XGINew_SetRegAND( pVBInfo->P3c4 , 0x32 , 0xDF ) ; /* Disable TV asPrimary VGA swap */
+ }
+
+ if ( pVBInfo->VBInfo & ( DisableCRT2Display | SetCRT2ToLCDA | SetSimuScanMode ) )
+ XGI_DisplayOff( HwDeviceExtension, pVBInfo) ;
+ }
+
+
+
+
+ if ( HwDeviceExtension->jChipType < XG40 )
+ {
+ if ( !( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) || ( XGI_DisableChISLCD(pVBInfo) ) || ( XGI_IsLCDON(pVBInfo) ) )
+ {
+ if ( pVBInfo->LCDInfo & SetPWDEnable )
+ {
+ if ( pVBInfo->LCDInfo & SetPWDEnable )
+ XGI_BacklightByDrv(pVBInfo) ;
+ else
+ {
+ XGI_SetPanelDelay( 4 ,pVBInfo) ;
+ if ( pVBInfo->VBType & VB_XGI301LV )
+ {
+ tempbl = 0xFD ;
+ tempah = 0x00 ;
+ }
+ else
+ {
+ tempbl = 0xFB ;
+ tempah = 0x04 ;
+ }
+ }
+ }
+ XGI_SetPanelPower( tempah , tempbl , pVBInfo) ;
+ }
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetTVPtrIndex */
+/* Input : */
+/* Output : */
+/* Description : bx 0 : ExtNTSC */
+/* 1 : StNTSC */
+/* 2 : ExtPAL */
+/* 3 : StPAL */
+/* 4 : ExtHiTV */
+/* 5 : StHiTV */
+/* 6 : Ext525i */
+/* 7 : St525i */
+/* 8 : Ext525p */
+/* 9 : St525p */
+/* A : Ext750p */
+/* B : St750p */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetTVPtrIndex( PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT tempbx = 0 ;
+
+ if ( pVBInfo->TVInfo & SetPALTV )
+ tempbx = 2 ;
+ if ( pVBInfo->TVInfo & SetYPbPrMode1080i )
+ tempbx = 4 ;
+ if ( pVBInfo->TVInfo & SetYPbPrMode525i )
+ tempbx = 6 ;
+ if ( pVBInfo->TVInfo & SetYPbPrMode525p )
+ tempbx = 8 ;
+ if ( pVBInfo->TVInfo & SetYPbPrMode750p )
+ tempbx = 10 ;
+ if ( pVBInfo->TVInfo & TVSimuMode )
+ tempbx++ ;
+
+ return tempbx ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_OEM310Setting */
+/* Input : */
+/* Output : */
+/* Description : Customized Param. for 301 */
+/* --------------------------------------------------------------------- */
+void XGI_OEM310Setting( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+{
+ if ( pVBInfo->SetFlag & Win9xDOSMode )
+ return ;
+
+ /* GetPart1IO(); */
+ XGI_SetDelayComp(pVBInfo) ;
+
+ if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+ XGI_SetLCDCap(pVBInfo) ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ /* GetPart2IO() */
+ XGI_SetPhaseIncr(pVBInfo) ;
+ XGI_SetYFilter( ModeNo , ModeIdIndex,pVBInfo ) ;
+ XGI_SetAntiFlicker( ModeNo , ModeIdIndex,pVBInfo ) ;
+
+ if ( pVBInfo->VBType&VB_XGI301)
+ XGI_SetEdgeEnhance( ModeNo , ModeIdIndex ,pVBInfo) ;
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetDelayComp */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetDelayComp( PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT index ;
+
+ UCHAR tempah ,
+ tempbl ,
+ tempbh ;
+
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA | SetCRT2ToTV | SetCRT2ToRAMDAC ) )
+ {
+ tempbl = 0;
+ tempbh = 0;
+
+ index = XGI_GetTVPtrIndex(pVBInfo ) ; /* Get TV Delay */
+ tempbl = pVBInfo->XGI_TVDelayList[ index ] ;
+
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ tempbl = pVBInfo->XGI_TVDelayList2[ index ] ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToDualEdge )
+ tempbl = tempbl >> 4 ;
+/*
+ if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+ tempbl = CRT2Delay1 ; // Get CRT2 Delay
+
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ tempbl = CRT2Delay2 ;
+*/
+ if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+ {
+ index = XGI_GetLCDCapPtr(pVBInfo) ; /* Get LCD Delay */
+ tempbh=pVBInfo->LCDCapList[ index ].LCD_DelayCompensation ;
+
+ if ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) )
+ tempbl = tempbh ;
+ }
+
+ tempbl &= 0x0F ;
+ tempbh &= 0xF0 ;
+ tempah = XGINew_GetReg1( pVBInfo->Part1Port , 0x2D ) ;
+
+ if ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToLCD | SetCRT2ToTV ) ) /* Channel B */
+ {
+ tempah &= 0xF0 ;
+ tempah |= tempbl ;
+ }
+
+ if ( pVBInfo->VBInfo & SetCRT2ToLCDA ) /* Channel A */
+ {
+ tempah &= 0x0F ;
+ tempah |= tempbh ;
+ }
+ XGINew_SetReg1(pVBInfo->Part1Port,0x2D,tempah);
+ }
+ }
+ else if ( pVBInfo->IF_DEF_LVDS == 1 )
+ {
+ tempbl = 0;
+ tempbh = 0;
+ if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+ {
+ tempah = pVBInfo->LCDCapList[ XGI_GetLCDCapPtr(pVBInfo) ].LCD_DelayCompensation ; /* / Get LCD Delay */
+ tempah &= 0x0f ;
+ tempah = tempah << 4 ;
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2D , 0x0f , tempah ) ;
+ }
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLCDCap */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetLCDCap( PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT tempcx ;
+
+ tempcx = pVBInfo->LCDCapList[ XGI_GetLCDCapPtr(pVBInfo) ].LCD_Capability ;
+
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ { /* 301LV/302LV only */
+ /* Set 301LV Capability */
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x24 , ( UCHAR )( tempcx & 0x1F ) ) ;
+ }
+ /* VB Driving */
+ XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x0D , ~( ( EnableVBCLKDRVLOW | EnablePLLSPLOW ) >> 8 ) , ( USHORT )( ( tempcx & ( EnableVBCLKDRVLOW | EnablePLLSPLOW ) ) >> 8 ) ) ;
+ }
+
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+ XGI_SetLCDCap_B( tempcx,pVBInfo ) ;
+ else if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+ XGI_SetLCDCap_A( tempcx,pVBInfo ) ;
+
+ if ( pVBInfo->VBType & ( VB_XGI302LV | VB_XGI301C ) )
+ {
+ if ( tempcx & EnableSpectrum )
+ SetSpectrum( pVBInfo) ;
+ }
+ }
+ else /* LVDS,CH7017 */
+ XGI_SetLCDCap_A( tempcx, pVBInfo ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLCDCap_A */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetLCDCap_A(USHORT tempcx,PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT temp ;
+
+ temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x37 ) ;
+
+ if ( temp & LCDRGB18Bit )
+ {
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x19 , 0x0F , ( USHORT )( 0x20 | ( tempcx & 0x00C0 ) ) ) ; /* Enable Dither */
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x1A , 0x7F , 0x80 ) ;
+ }
+ else
+ {
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x19 , 0x0F , ( USHORT )( 0x30 | ( tempcx & 0x00C0 ) ) ) ;
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x1A , 0x7F , 0x00 ) ;
+ }
+
+/*
+ if ( tempcx & EnableLCD24bpp ) // 24bits
+ {
+ XGINew_SetRegANDOR(pVBInfo->Part1Port,0x19, 0x0F,(USHORT)(0x30|(tempcx&0x00C0)) );
+ XGINew_SetRegANDOR(pVBInfo->Part1Port,0x1A,0x7F,0x00);
+ }
+ else
+ {
+ XGINew_SetRegANDOR(pVBInfo->Part1Port,0x19, 0x0F,(USHORT)(0x20|(tempcx&0x00C0)) );//Enable Dither
+ XGINew_SetRegANDOR(pVBInfo->Part1Port,0x1A,0x7F,0x80);
+ }
+*/
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLCDCap_B */
+/* Input : cx -> LCD Capability */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetLCDCap_B(USHORT tempcx,PVB_DEVICE_INFO pVBInfo)
+{
+ if ( tempcx & EnableLCD24bpp ) /* 24bits */
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x1A , 0xE0 , ( USHORT )( ( ( tempcx & 0x00ff ) >> 6 ) | 0x0c ) ) ;
+ else
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x1A , 0xE0 , ( USHORT )( ( ( tempcx & 0x00ff ) >> 6 ) | 0x18 ) ) ; /* Enable Dither */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : SetSpectrum */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void SetSpectrum( PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT index ;
+
+ index = XGI_GetLCDCapPtr(pVBInfo) ;
+
+ XGINew_SetRegAND( pVBInfo->Part4Port , 0x30 , 0x8F ) ; /* disable down spectrum D[4] */
+ XGI_LongWait(pVBInfo) ;
+ XGINew_SetRegOR( pVBInfo->Part4Port , 0x30 , 0x20 ) ; /* reset spectrum */
+ XGI_LongWait(pVBInfo) ;
+
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x31 , pVBInfo->LCDCapList[ index ].Spectrum_31 ) ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x32 , pVBInfo->LCDCapList[ index ].Spectrum_32 ) ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x33 , pVBInfo->LCDCapList[ index ].Spectrum_33 ) ;
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x34 , pVBInfo->LCDCapList[ index ].Spectrum_34 ) ;
+ XGI_LongWait(pVBInfo) ;
+ XGINew_SetRegOR( pVBInfo->Part4Port , 0x30 , 0x40 ) ; /* enable spectrum */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetAntiFlicker */
+/* Input : */
+/* Output : */
+/* Description : Set TV Customized Param. */
+/* --------------------------------------------------------------------- */
+void XGI_SetAntiFlicker( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT tempbx ,
+ index ;
+
+ UCHAR tempah ;
+
+ if (pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) )
+ return ;
+
+ tempbx = XGI_GetTVPtrIndex(pVBInfo ) ;
+ tempbx &= 0xFE ;
+
+ if ( ModeNo <= 0x13 )
+ {
+ index = pVBInfo->SModeIDTable[ ModeIdIndex ].VB_StTVFlickerIndex ;
+ }
+ else
+ {
+ index = pVBInfo->EModeIDTable[ ModeIdIndex ].VB_ExtTVFlickerIndex ;
+ }
+
+ tempbx += index ;
+ tempah = TVAntiFlickList[ tempbx ] ;
+ tempah = tempah << 4 ;
+
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x0A , 0x8F , tempah ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetEdgeEnhance */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetEdgeEnhance( USHORT ModeNo , USHORT ModeIdIndex , PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT tempbx ,
+ index ;
+
+ UCHAR tempah ;
+
+
+ tempbx = XGI_GetTVPtrIndex(pVBInfo ) ;
+ tempbx &= 0xFE ;
+
+ if ( ModeNo <= 0x13 )
+ {
+ index = pVBInfo->SModeIDTable[ ModeIdIndex ].VB_StTVEdgeIndex ;
+ }
+ else
+ {
+ index = pVBInfo->EModeIDTable[ ModeIdIndex ].VB_ExtTVEdgeIndex ;
+ }
+
+ tempbx += index ;
+ tempah = TVEdgeList[ tempbx ] ;
+ tempah = tempah << 5 ;
+
+ XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x3A , 0x1F , tempah ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetPhaseIncr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetPhaseIncr( PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT tempbx ;
+
+ UCHAR tempcl ,
+ tempch ;
+
+ ULONG tempData ;
+
+ XGI_GetTVPtrIndex2( &tempbx , &tempcl , &tempch, pVBInfo ) ; /* bx, cl, ch */
+ tempData = TVPhaseList[ tempbx ] ;
+
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x31 , ( USHORT )( tempData & 0x000000FF ) ) ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x32 , ( USHORT )( ( tempData & 0x0000FF00 ) >> 8 ) ) ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x33 , ( USHORT )( ( tempData & 0x00FF0000 ) >> 16 ) ) ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x34 , ( USHORT )( ( tempData & 0xFF000000 ) >> 24 ) ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetYFilter */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetYFilter( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT tempbx ,
+ index ;
+
+ UCHAR tempcl ,
+ tempch ,
+ tempal ,
+ *filterPtr ;
+
+ XGI_GetTVPtrIndex2( &tempbx , &tempcl , &tempch, pVBInfo ) ; /* bx, cl, ch */
+
+ switch( tempbx )
+ {
+ case 0x00:
+ case 0x04:
+ filterPtr = NTSCYFilter1 ;
+ break ;
+
+ case 0x01:
+ filterPtr = PALYFilter1 ;
+ break ;
+
+ case 0x02:
+ case 0x05:
+ case 0x0D:
+ filterPtr = PALMYFilter1 ;
+ break ;
+
+ case 0x03:
+ filterPtr = PALNYFilter1 ;
+ break ;
+
+ case 0x08:
+ case 0x0C:
+ filterPtr = NTSCYFilter2 ;
+ break ;
+
+ case 0x0A:
+ filterPtr = PALMYFilter2 ;
+ break ;
+
+ case 0x0B:
+ filterPtr = PALNYFilter2 ;
+ break ;
+
+ case 0x09:
+ filterPtr = PALYFilter2 ;
+ break ;
+
+ default:
+ return ;
+ }
+
+ if ( ModeNo <= 0x13 )
+ tempal = pVBInfo->SModeIDTable[ ModeIdIndex ].VB_StTVYFilterIndex ;
+ else
+ tempal = pVBInfo->EModeIDTable[ ModeIdIndex ].VB_ExtTVYFilterIndex ;
+
+ if ( tempcl == 0 )
+ index = tempal * 4;
+ else
+ index = tempal * 7;
+
+ if ( ( tempcl == 0 ) && ( tempch == 1 ) )
+ {
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x35 , 0 ) ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x36 , 0 ) ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x37 , 0 ) ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x38 , filterPtr[ index++ ] ) ;
+ }
+ else
+ {
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x35 , filterPtr[ index++ ] ) ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x36 , filterPtr[ index++ ] ) ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x37 , filterPtr[ index++ ] ) ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x38 , filterPtr[ index++ ] ) ;
+ }
+
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x48 , filterPtr[ index++ ] ) ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x49 , filterPtr[ index++ ] ) ;
+ XGINew_SetReg1( pVBInfo->Part2Port , 0x4A , filterPtr[ index++ ] ) ;
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetTVPtrIndex2 */
+/* Input : */
+/* Output : bx 0 : NTSC */
+/* 1 : PAL */
+/* 2 : PALM */
+/* 3 : PALN */
+/* 4 : NTSC1024x768 */
+/* 5 : PAL-M 1024x768 */
+/* 6-7: reserved */
+/* cl 0 : YFilter1 */
+/* 1 : YFilter2 */
+/* ch 0 : 301A */
+/* 1 : 301B/302B/301LV/302LV */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetTVPtrIndex2(USHORT* tempbx,UCHAR* tempcl,UCHAR* tempch, PVB_DEVICE_INFO pVBInfo)
+{
+ *tempbx = 0 ;
+ *tempcl = 0 ;
+ *tempch = 0 ;
+
+ if ( pVBInfo->TVInfo & SetPALTV )
+ *tempbx = 1 ;
+
+ if ( pVBInfo->TVInfo & SetPALMTV )
+ *tempbx = 2 ;
+
+ if ( pVBInfo->TVInfo & SetPALNTV )
+ *tempbx = 3 ;
+
+ if ( pVBInfo->TVInfo & NTSC1024x768 )
+ {
+ *tempbx = 4 ;
+ if ( pVBInfo->TVInfo & SetPALMTV )
+ *tempbx = 5 ;
+ }
+
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ if ( ( !( pVBInfo->VBInfo & SetInSlaveMode ) ) || ( pVBInfo->TVInfo & TVSimuMode ) )
+ {
+ *tempbx += 8 ;
+ *tempcl += 1 ;
+ }
+ }
+
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ (*tempch)++ ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT2ModeRegs */
+/* Input : */
+/* Output : */
+/* Description : Origin code for crt2group */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT2ModeRegs(USHORT ModeNo,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT tempbl ;
+ SHORT tempcl ;
+
+ UCHAR tempah ;
+
+ /* XGINew_SetReg1( pVBInfo->Part1Port , 0x03 , 0x00 ) ; // fix write part1 index 0 BTDRAM bit Bug */
+ tempah=0;
+ if ( !( pVBInfo->VBInfo & DisableCRT2Display ) )
+ {
+ tempah=XGINew_GetReg1( pVBInfo->Part1Port , 0x00 ) ;
+ tempah &= ~0x10 ; /* BTRAMDAC */
+ tempah |= 0x40 ; /* BTRAM */
+
+ if ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToTV | SetCRT2ToLCD ) )
+ {
+ tempah=0x40; /* BTDRAM */
+ if ( ModeNo > 0x13 )
+ {
+ tempcl = pVBInfo->ModeType ;
+ tempcl -= ModeVGA ;
+ if ( tempcl >= 0 )
+ {
+ tempah = ( 0x008 >> tempcl ) ; /* BT Color */
+ if ( tempah == 0 )
+ tempah = 1 ;
+ tempah |= 0x040 ;
+ }
+ }
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ tempah ^= 0x50 ; /* BTDAC */
+ }
+ }
+
+/* 0210 shampoo
+ if ( pVBInfo->VBInfo & DisableCRT2Display )
+ {
+ tempah = 0 ;
+ }
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x00 , tempah ) ;
+ if ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToTV | SetCRT2ToLCD ) )
+ {
+ tempcl = pVBInfo->ModeType ;
+ if ( ModeNo > 0x13 )
+ {
+ tempcl -= ModeVGA ;
+ if ( ( tempcl > 0 ) || ( tempcl == 0 ) )
+ {
+ tempah=(0x008>>tempcl) ;
+ if ( tempah == 0 )
+ tempah = 1 ;
+ tempah |= 0x040;
+ }
+ }
+ else
+ {
+ tempah = 0x040 ;
+ }
+
+ if ( pVBInfo->VBInfo & SetInSlaveMode )
+ {
+ tempah = ( tempah ^ 0x050 ) ;
+ }
+ }
+*/
+
+ XGINew_SetReg1( pVBInfo->Part1Port , 0x00 , tempah ) ;
+ tempah = 0x08 ;
+ tempbl = 0xf0 ;
+
+ if ( pVBInfo->VBInfo & DisableCRT2Display )
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2e , tempbl , tempah ) ;
+ else
+ {
+ tempah = 0x00 ;
+ tempbl = 0xff ;
+
+ if ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToTV | SetCRT2ToLCD | SetCRT2ToLCDA ) )
+ {
+ if ( ( pVBInfo->VBInfo & SetCRT2ToLCDA ) && ( !( pVBInfo->VBInfo & SetSimuScanMode ) ) )
+ {
+ tempbl &= 0xf7 ;
+ tempah |= 0x01 ;
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2e , tempbl , tempah ) ;
+ }
+ else
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+ {
+ tempbl &= 0xf7 ;
+ tempah |= 0x01 ;
+ }
+
+ if ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToTV | SetCRT2ToLCD ) )
+ {
+ tempbl &= 0xf8 ;
+ tempah = 0x01 ;
+
+ if ( !( pVBInfo->VBInfo & SetInSlaveMode ) )
+ tempah |= 0x02 ;
+
+ if ( !( pVBInfo->VBInfo & SetCRT2ToRAMDAC ) )
+ {
+ tempah = tempah ^ 0x05 ;
+ if ( !( pVBInfo->VBInfo & SetCRT2ToLCD ) )
+ tempah = tempah ^ 0x01 ;
+ }
+
+ if ( !( pVBInfo->VBInfo & SetCRT2ToDualEdge ) )
+ tempah |= 0x08 ;
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2e , tempbl , tempah ) ;
+ }
+ else
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2e , tempbl , tempah ) ;
+ }
+ }
+ else
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2e , tempbl , tempah ) ;
+ }
+
+ if ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToTV | SetCRT2ToLCD | SetCRT2ToLCDA ) )
+ {
+ tempah &= ( ~0x08 ) ;
+ if ( ( pVBInfo->ModeType == ModeVGA ) && ( !( pVBInfo->VBInfo & SetInSlaveMode ) ) )
+ {
+ tempah |= 0x010 ;
+ }
+ tempah |= 0x080 ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ /* if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) ) ) */
+ /* { */
+ tempah |= 0x020 ;
+ if ( ModeNo > 0x13 )
+ {
+ if ( pVBInfo->VBInfo & DriverMode )
+ tempah = tempah ^ 0x20 ;
+ }
+ /* } */
+ }
+
+ XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x0D , ~0x0BF , tempah ) ;
+ tempah = 0 ;
+
+ if ( pVBInfo->LCDInfo & SetLCDDualLink )
+ tempah |= 0x40 ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ /* if ( ( !( pVBInfo->VBInfo & SetCRT2ToHiVisionTV ) ) && ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) ) ) ) */
+ /* { */
+ if ( pVBInfo->TVInfo & RPLLDIV2XO )
+ tempah |= 0x40 ;
+ /* } */
+ }
+
+ if ( ( pVBInfo->LCDResInfo == Panel1280x1024 ) || ( pVBInfo->LCDResInfo == Panel1280x1024x75 ) )
+ tempah |= 0x80 ;
+
+ if ( pVBInfo->LCDResInfo == Panel1280x960 )
+ tempah |= 0x80 ;
+
+ XGINew_SetReg1( pVBInfo->Part4Port , 0x0C , tempah ) ;
+ }
+
+ if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+ {
+ tempah = 0 ;
+ tempbl = 0xfb ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToDualEdge )
+ {
+ tempbl=0xff;
+ if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+ tempah |= 0x04 ; /* shampoo 0129 */
+ }
+
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x13 , tempbl , tempah ) ;
+ tempah = 0x00 ;
+ tempbl = 0xcf ;
+ if ( !( pVBInfo->VBInfo & DisableCRT2Display ) )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToDualEdge )
+ tempah |= 0x30 ;
+ }
+
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2c , tempbl , tempah ) ;
+ tempah = 0 ;
+ tempbl = 0x3f ;
+
+ if ( !( pVBInfo->VBInfo & DisableCRT2Display ) )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToDualEdge )
+ tempah |= 0xc0 ;
+ }
+ XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x21 , tempbl , tempah ) ;
+ }
+
+ tempah = 0 ;
+ tempbl = 0x7f ;
+ if ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) )
+ {
+ tempbl = 0xff ;
+ if ( !( pVBInfo->VBInfo & SetCRT2ToDualEdge ) )
+ tempah |= 0x80 ;
+ }
+
+ XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x23 , tempbl , tempah ) ;
+
+ if ( pVBInfo->VBType & ( VB_XGI302LV | VB_XGI301C ) )
+ {
+ if ( pVBInfo->LCDInfo & SetLCDDualLink )
+ {
+ XGINew_SetRegOR( pVBInfo->Part4Port , 0x27 , 0x20 ) ;
+ XGINew_SetRegOR( pVBInfo->Part4Port , 0x34 , 0x10 ) ;
+ }
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_CloseCRTC */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_CloseCRTC( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT tempbx ;
+
+ tempbx = 0 ;
+
+ if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+ tempbx = 0x08A0 ;
+
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_OpenCRTC */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_OpenCRTC( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT tempbx ;
+
+ tempbx = 0 ;
+
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetRAMDAC2DATA */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetRAMDAC2DATA(USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT tempax ,
+ tempbx ,
+ temp1 ,
+ temp2 ,
+ modeflag = 0 ,
+ tempcx ,
+ StandTableIndex ,
+ CRT1Index ;
+
+ pVBInfo->RVBHCMAX = 1 ;
+ pVBInfo->RVBHCFACT = 1 ;
+
+ if ( ModeNo <= 0x13 )
+ {
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+ StandTableIndex = XGI_GetModePtr( ModeNo , ModeIdIndex, pVBInfo ) ;
+ tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 0 ] ;
+ tempbx = pVBInfo->StandTable[StandTableIndex ].CRTC[ 6 ] ;
+ temp1 = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 7 ] ;
+ }
+ else
+ {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+ CRT1Index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+ CRT1Index &= IndexMask ;
+ temp1 = ( USHORT )pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 0 ] ;
+ temp2 = ( USHORT )pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 5 ] ;
+ tempax = ( temp1 & 0xFF ) | ( ( temp2 & 0x03 ) << 8 ) ;
+ tempbx = ( USHORT )pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 8 ] ;
+ tempcx = ( USHORT )pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 14 ] << 8 ;
+ tempcx &= 0x0100 ;
+ tempcx = tempcx << 2 ;
+ tempbx |= tempcx;
+ temp1 = ( USHORT )pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 9 ] ;
+ }
+
+ if ( temp1 & 0x01 )
+ tempbx |= 0x0100 ;
+
+ if ( temp1 & 0x20 )
+ tempbx |= 0x0200 ;
+ tempax += 5 ;
+
+ if ( modeflag & Charx8Dot )
+ tempax *= 8 ;
+ else
+ tempax *= 9 ;
+
+ pVBInfo->VGAHT = tempax ;
+ pVBInfo->HT = tempax ;
+ tempbx++ ;
+ pVBInfo->VGAVT = tempbx ;
+ pVBInfo->VT = tempbx ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetColorDepth */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetColorDepth(USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT ColorDepth[ 6 ] = { 1 , 2 , 4 , 4 , 6 , 8 } ;
+ SHORT index ;
+ USHORT modeflag ;
+
+ if ( ModeNo <= 0x13 )
+ {
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+ }
+ else
+ {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+ }
+
+ index=(modeflag&ModeInfoFlag)-ModeEGA;
+
+ if ( index < 0 )
+ index = 0 ;
+
+ return( ColorDepth[ index ] ) ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_UnLockCRT2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_UnLockCRT2( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2f , 0xFF , 0x01 ) ;
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_LockCRT2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_LockCRT2( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+
+ XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2F , 0xFE , 0x00 ) ;
+
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_EnableCRT2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_EnableCRT2( PVB_DEVICE_INFO pVBInfo)
+{
+ XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x1E , 0xFF , 0x20 ) ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_LCD_Wait_Time(UCHAR DelayTime, PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT i ,
+ j ;
+
+ ULONG temp ,
+ flag ;
+
+ flag = 0 ;
+//printk("XGINew_LCD_Wait_Time");
+//return;
+ for( i = 0 ; i < DelayTime ; i++ )
+ {
+ for( j = 0 ; j < 66 ; j++ )
+ {
+
+ temp = XGINew_GetReg3( 0x61 ) ;
+
+ //temp &= 0x10000000;
+ temp &= 0x10;
+ if ( temp == flag )
+ continue ;
+
+ flag = temp ;
+ }
+ }
+}
+
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_BridgeIsOn */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_BridgeIsOn( PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT flag ;
+
+ if ( pVBInfo->IF_DEF_LVDS == 1 )
+ {
+ return( 1 ) ;
+ }
+ else
+ {
+ flag = XGINew_GetReg1( pVBInfo->Part4Port , 0x00 ) ;
+ if ( ( flag == 1 ) || ( flag == 2 ) )
+ return( 1 ) ; /* 301b */
+ else
+ return( 0 ) ;
+ }
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_LongWait */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_LongWait(PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT i ;
+
+ i = XGINew_GetReg1( pVBInfo->P3c4 , 0x1F ) ;
+
+ if ( !( i & 0xC0 ) )
+ {
+ for( i = 0 ; i < 0xFFFF ; i++ )
+ {
+ if ( !( XGINew_GetReg2( pVBInfo->P3da ) & 0x08 ) )
+ break ;
+ }
+
+ for( i = 0 ; i < 0xFFFF ; i++ )
+ {
+ if ( ( XGINew_GetReg2( pVBInfo->P3da ) & 0x08 ) )
+ break ;
+ }
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_VBLongWait */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_VBLongWait( PVB_DEVICE_INFO pVBInfo )
+{
+ USHORT tempal ,
+ temp ,
+ i ,
+ j ;
+return ;
+ if ( !( pVBInfo->VBInfo & SetCRT2ToTV ) )
+ {
+ temp = 0 ;
+ for( i = 0 ; i < 3 ; i++ )
+ {
+ for( j = 0 ; j < 100 ; j++ )
+ {
+ tempal = XGINew_GetReg2( pVBInfo->P3da ) ;
+ if ( temp & 0x01 )
+ { /* VBWaitMode2 */
+ if ( ( tempal & 0x08 ) )
+ {
+ continue ;
+ }
+
+ if ( !( tempal & 0x08 ) )
+ {
+ break ;
+ }
+ }
+ else
+ { /* VBWaitMode1 */
+ if ( !( tempal & 0x08 ) )
+ {
+ continue ;
+ }
+
+ if ( ( tempal & 0x08 ) )
+ {
+ break ;
+ }
+ }
+ }
+ temp = temp ^ 0x01 ;
+ }
+ }
+ else
+ {
+ XGI_LongWait(pVBInfo) ;
+ }
+ return ;
+}
+
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVGAHT2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetVGAHT2( PVB_DEVICE_INFO pVBInfo )
+{
+ ULONG tempax ,
+ tempbx ;
+
+ tempbx = ( ( pVBInfo->VGAVT - pVBInfo->VGAVDE ) * pVBInfo->RVBHCMAX ) & 0xFFFF ;
+ tempax = ( pVBInfo->VT - pVBInfo->VDE ) * pVBInfo->RVBHCFACT ;
+ tempax = ( tempax * pVBInfo->HT ) /tempbx ;
+
+ return( ( USHORT )tempax ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVCLK2Ptr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetVCLK2Ptr( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension ,PVB_DEVICE_INFO pVBInfo)
+{
+ USHORT tempbx ;
+
+ USHORT LCDXlat1VCLK[ 4 ] = { VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 } ;
+ USHORT LCDXlat2VCLK[ 4 ] = { VCLK108_2 + 5 , VCLK108_2 + 5 , VCLK108_2 + 5 , VCLK108_2 + 5 } ;
+ USHORT LVDSXlat1VCLK[ 4 ] = { VCLK40 , VCLK40 , VCLK40 , VCLK40 } ;
+ USHORT LVDSXlat2VCLK[ 4 ] = { VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 } ;
+ USHORT LVDSXlat3VCLK[ 4 ] = { VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 } ;
+
+ USHORT CRT2Index , VCLKIndex ;
+ USHORT modeflag , resinfo ;
+ UCHAR *CHTVVCLKPtr = NULL ;
+
+ if ( ModeNo <= 0x13 )
+ {
+ modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ; /* si+St_ResInfo */
+ resinfo = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;
+ CRT2Index = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ;
+ }
+ else
+ {
+ modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ; /* si+Ext_ResInfo */
+ resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+ CRT2Index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT2CRTC ;
+ }
+
+ if ( pVBInfo->IF_DEF_LVDS == 0 )
+ {
+ CRT2Index = CRT2Index >> 6 ; /* for LCD */
+ if ( ( ( pVBInfo->VBInfo & SetCRT2ToLCD ) | SetCRT2ToLCDA ) ) /*301b*/
+ {
+ if ( pVBInfo->LCDResInfo != Panel1024x768 )
+ {
+ VCLKIndex = LCDXlat2VCLK[ CRT2Index ] ;
+ }
+ else
+ {
+ VCLKIndex = LCDXlat1VCLK[ CRT2Index ] ;
+ }
+ }
+ else /* for TV */
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+ {
+ if ( pVBInfo->SetFlag & RPLLDIV2XO )
+ {
+ VCLKIndex = HiTVVCLKDIV2 ;
+
+
+ VCLKIndex += 25 ;
+
+ }
+ else
+ {
+ VCLKIndex = HiTVVCLK ;
+
+
+ VCLKIndex += 25 ;
+
+ }
+
+ if ( pVBInfo->SetFlag & TVSimuMode )
+ {
+ if( modeflag & Charx8Dot )
+ {
+ VCLKIndex = HiTVSimuVCLK ;
+
+
+ VCLKIndex += 25 ;
+
+ }
+ else
+ {
+ VCLKIndex = HiTVTextVCLK ;
+
+
+ VCLKIndex += 25 ;
+
+ }
+ }
+
+ if ( pVBInfo->VBType & VB_XGI301LV ) /* 301lv */
+ {
+ if ( !( pVBInfo->VBExtInfo == VB_YPbPr1080i ) )
+ {
+ VCLKIndex = YPbPr750pVCLK ;
+ if ( !( pVBInfo->VBExtInfo == VB_YPbPr750p ) )
+ {
+ VCLKIndex = YPbPr525pVCLK ;
+ if ( !( pVBInfo->VBExtInfo == VB_YPbPr525p ) )
+ {
+ VCLKIndex = YPbPr525iVCLK_2 ;
+ if ( !( pVBInfo->SetFlag & RPLLDIV2XO ) )
+ VCLKIndex = YPbPr525iVCLK ;
+ }
+ }
+ }
+ }
+ }
+ else
+ {
+ if ( pVBInfo->VBInfo & SetCRT2ToTV )
+ {
+ if ( pVBInfo->SetFlag & RPLLDIV2XO )
+ {
+ VCLKIndex = TVVCLKDIV2 ;
+
+
+ VCLKIndex += 25 ;
+
+ }
+ else
+ {
+ VCLKIndex = TVVCLK ;
+
+
+ VCLKIndex += 25 ;
+
+ }
+ }
+ }
+ }
+ else
+ { /* for CRT2 */
+ VCLKIndex = ( UCHAR )XGINew_GetReg2( ( pVBInfo->P3ca + 0x02 ) ) ; /* Port 3cch */
+ VCLKIndex = ( ( VCLKIndex >> 2 ) & 0x03 ) ;
+ if ( ModeNo > 0x13 )
+ {
+ VCLKIndex = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRTVCLK ; /* di+Ext_CRTVCLK */
+ VCLKIndex &= IndexMask ;
+ }
+ }
+ }
+ }
+ else
+ { /* LVDS */
+ if ( ModeNo <= 0x13 )
+ VCLKIndex = CRT2Index ;
+ else
+ VCLKIndex = CRT2Index ;
+
+ if ( pVBInfo->IF_DEF_CH7005 == 1 )
+ {
+ if ( !( pVBInfo->VBInfo & SetCRT2ToLCD ) )
+ {
+ VCLKIndex &= 0x1f ;
+ tempbx = 0 ;
+
+ if ( pVBInfo->VBInfo & SetPALTV )
+ tempbx += 2 ;
+
+ if ( pVBInfo->VBInfo & SetCHTVOverScan )
+ tempbx += 1 ;
+
+ switch( tempbx )
+ {
+ case 0:
+ CHTVVCLKPtr = pVBInfo->CHTVVCLKUNTSC ;
+ break ;
+ case 1:
+ CHTVVCLKPtr = pVBInfo->CHTVVCLKONTSC ;
+ break;
+ case 2:
+ CHTVVCLKPtr = pVBInfo->CHTVVCLKUPAL ;
+ break ;
+ case 3:
+ CHTVVCLKPtr = pVBInfo->CHTVVCLKOPAL ;
+ break ;
+ default:
+ break ;
+ }
+
+ VCLKIndex = CHTVVCLKPtr[ VCLKIndex ] ;
+ }
+ }
+ else
+ {
+ VCLKIndex = VCLKIndex >> 6 ;
+ if ( ( pVBInfo->LCDResInfo == Panel800x600 ) || ( pVBInfo->LCDResInfo == Panel320x480 ) )
+ VCLKIndex = LVDSXlat1VCLK[ VCLKIndex ] ;
+ else if ( ( pVBInfo->LCDResInfo == Panel1024x768 ) || ( pVBInfo->LCDResInfo == Panel1024x768x75 ) )
+ VCLKIndex = LVDSXlat2VCLK[ VCLKIndex ] ;
+ else
+ VCLKIndex = LVDSXlat3VCLK[ VCLKIndex ] ;
+ }
+ }
+ /* VCLKIndex = VCLKIndex&IndexMask ; */
+
+
+
+ return( VCLKIndex ) ;
+}
+
diff --git a/drivers/staging/xgifb/vb_setmode.h b/drivers/staging/xgifb/vb_setmode.h
new file mode 100644
index 0000000..09753d7
--- /dev/null
+++ b/drivers/staging/xgifb/vb_setmode.h
@@ -0,0 +1,40 @@
+#ifndef _VBSETMODE_
+#define _VBSETMODE_
+
+extern void InitTo330Pointer(UCHAR,PVB_DEVICE_INFO);
+extern void XGI_UnLockCRT2(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern void XGI_LockCRT2(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern void XGI_LongWait( PVB_DEVICE_INFO );
+extern void XGI_SetCRT2ModeRegs(USHORT ModeNo,PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO );
+extern void XGI_DisableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern void XGI_EnableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern void XGI_DisplayOff( PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO );
+extern void XGI_DisplayOn( PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO );
+extern void XGI_GetVBType(PVB_DEVICE_INFO);
+extern void XGI_SenseCRT1(PVB_DEVICE_INFO );
+extern void XGI_GetVGAType(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern void XGI_GetVBInfo(USHORT ModeNo,USHORT ModeIdIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern void XGI_GetTVInfo(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO );
+extern void XGI_SetCRT1Offset(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern void XGI_SetLCDAGroup(USHORT ModeNo,USHORT ModeIdIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern void XGI_WaitDisply( PVB_DEVICE_INFO );
+extern USHORT XGI_GetResInfo(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+
+extern BOOLEAN XGISetModeNew( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo ) ;
+
+extern BOOLEAN XGI_SearchModeID( USHORT ModeNo,USHORT *ModeIdIndex, PVB_DEVICE_INFO );
+extern BOOLEAN XGI_GetLCDInfo(USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO );
+extern BOOLEAN XGI_BridgeIsOn( PVB_DEVICE_INFO );
+extern BOOLEAN XGI_SetCRT2Group301(USHORT ModeNo, PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO);
+extern USHORT XGI_GetRatePtrCRT2( PXGI_HW_DEVICE_INFO pXGIHWDE, USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO );
+
+extern void XGI_SetXG21FPBits(PVB_DEVICE_INFO pVBInfo);
+extern void XGI_SetXG27FPBits(PVB_DEVICE_INFO pVBInfo);
+extern void XGI_XG21BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+extern void XGI_XG27BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+extern void XGI_XG21SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+extern BOOLEAN XGI_XG21CheckLVDSMode(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo );
+extern void XGI_SetXG21LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo );
+extern USHORT XGI_GetLVDSOEMTableIndex(PVB_DEVICE_INFO pVBInfo);
+
+#endif
diff --git a/drivers/staging/xgifb/vb_struct.h b/drivers/staging/xgifb/vb_struct.h
new file mode 100644
index 0000000..bb25c0e
--- /dev/null
+++ b/drivers/staging/xgifb/vb_struct.h
@@ -0,0 +1,534 @@
+#ifndef _VB_STRUCT_
+#define _VB_STRUCT_
+
+#ifdef _INITNEW_
+#define EXTERN
+#else
+#define EXTERN extern
+#endif
+
+
+
+
+typedef struct _XGI_PanelDelayTblStruct
+{
+ UCHAR timer[2];
+} XGI_PanelDelayTblStruct;
+
+typedef struct _XGI_LCDDataStruct
+{
+ USHORT RVBHCMAX;
+ USHORT RVBHCFACT;
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT LCDHT;
+ USHORT LCDVT;
+} XGI_LCDDataStruct;
+
+
+typedef struct _XGI_LVDSCRT1HDataStruct
+{
+ UCHAR Reg[8];
+} XGI_LVDSCRT1HDataStruct;
+typedef struct _XGI_LVDSCRT1VDataStruct
+{
+ UCHAR Reg[7];
+} XGI_LVDSCRT1VDataStruct;
+
+
+typedef struct _XGI_TVDataStruct
+{
+ USHORT RVBHCMAX;
+ USHORT RVBHCFACT;
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT TVHDE;
+ USHORT TVVDE;
+ USHORT RVBHRS;
+ UCHAR FlickerMode;
+ USHORT HALFRVBHRS;
+ UCHAR RY1COE;
+ UCHAR RY2COE;
+ UCHAR RY3COE;
+ UCHAR RY4COE;
+} XGI_TVDataStruct;
+
+typedef struct _XGI_LVDSDataStruct
+{
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT LCDHT;
+ USHORT LCDVT;
+} XGI_LVDSDataStruct;
+
+typedef struct _XGI_LVDSDesStruct
+{
+ USHORT LCDHDES;
+ USHORT LCDVDES;
+} XGI_LVDSDesStruct;
+
+typedef struct _XGI_LVDSCRT1DataStruct
+{
+ UCHAR CR[15];
+} XGI_LVDSCRT1DataStruct;
+
+/*add for LCDA*/
+
+
+typedef struct _XGI_StStruct
+{
+ UCHAR St_ModeID;
+ USHORT St_ModeFlag;
+ UCHAR St_StTableIndex;
+ UCHAR St_CRT2CRTC;
+ UCHAR St_CRT2CRTC2;
+ UCHAR St_ResInfo;
+ UCHAR VB_StTVFlickerIndex;
+ UCHAR VB_StTVEdgeIndex;
+ UCHAR VB_StTVYFilterIndex;
+} XGI_StStruct;
+
+typedef struct _XGI_StandTableStruct
+{
+ UCHAR CRT_COLS;
+ UCHAR ROWS;
+ UCHAR CHAR_HEIGHT;
+ USHORT CRT_LEN;
+ UCHAR SR[4];
+ UCHAR MISC;
+ UCHAR CRTC[0x19];
+ UCHAR ATTR[0x14];
+ UCHAR GRC[9];
+} XGI_StandTableStruct;
+
+typedef struct _XGI_ExtStruct
+{
+ UCHAR Ext_ModeID;
+ USHORT Ext_ModeFlag;
+ USHORT Ext_ModeInfo;
+ USHORT Ext_Point;
+ USHORT Ext_VESAID;
+ UCHAR Ext_VESAMEMSize;
+ UCHAR Ext_RESINFO;
+ UCHAR VB_ExtTVFlickerIndex;
+ UCHAR VB_ExtTVEdgeIndex;
+ UCHAR VB_ExtTVYFilterIndex;
+ UCHAR REFindex;
+} XGI_ExtStruct;
+
+typedef struct _XGI_Ext2Struct
+{
+ USHORT Ext_InfoFlag;
+ UCHAR Ext_CRT1CRTC;
+ UCHAR Ext_CRTVCLK;
+ UCHAR Ext_CRT2CRTC;
+ UCHAR Ext_CRT2CRTC2;
+ UCHAR ModeID;
+ USHORT XRes;
+ USHORT YRes;
+ /* USHORT ROM_OFFSET; */
+} XGI_Ext2Struct;
+
+
+typedef struct _XGI_MCLKDataStruct
+{
+ UCHAR SR28,SR29,SR2A;
+ USHORT CLOCK;
+} XGI_MCLKDataStruct;
+
+typedef struct _XGI_ECLKDataStruct
+{
+ UCHAR SR2E,SR2F,SR30;
+ USHORT CLOCK;
+} XGI_ECLKDataStruct;
+
+typedef struct _XGI_VCLKDataStruct
+{
+ UCHAR SR2B,SR2C;
+ USHORT CLOCK;
+} XGI_VCLKDataStruct;
+
+typedef struct _XGI_VBVCLKDataStruct
+{
+ UCHAR Part4_A,Part4_B;
+ USHORT CLOCK;
+} XGI_VBVCLKDataStruct;
+
+typedef struct _XGI_StResInfoStruct
+{
+ USHORT HTotal;
+ USHORT VTotal;
+} XGI_StResInfoStruct;
+
+typedef struct _XGI_ModeResInfoStruct
+{
+ USHORT HTotal;
+ USHORT VTotal;
+ UCHAR XChar;
+ UCHAR YChar;
+} XGI_ModeResInfoStruct;
+
+typedef struct _XGI_LCDNBDesStruct
+{
+ UCHAR NB[12];
+} XGI_LCDNBDesStruct;
+ /*add for new UNIVGABIOS*/
+typedef struct _XGI_LCDDesStruct
+{
+ USHORT LCDHDES;
+ USHORT LCDHRS;
+ USHORT LCDVDES;
+ USHORT LCDVRS;
+} XGI_LCDDesStruct;
+
+typedef struct _XGI_LCDDataTablStruct
+{
+ UCHAR PANELID;
+ USHORT MASK;
+ USHORT CAP;
+ USHORT DATAPTR;
+} XGI_LCDDataTablStruct;
+
+typedef struct _XGI_TVTablDataStruct
+{
+ USHORT MASK;
+ USHORT CAP;
+ USHORT DATAPTR;
+} XGI_TVDataTablStruct;
+
+typedef struct _XGI330_LCDDesDataStruct
+{
+ USHORT LCDHDES;
+ USHORT LCDHRS;
+ USHORT LCDVDES;
+ USHORT LCDVRS;
+} XGI330_LCDDataDesStruct;
+
+
+typedef struct _XGI330_LVDSDataStruct
+{
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT LCDHT;
+ USHORT LCDVT;
+} XGI330_LVDSDataStruct;
+
+typedef struct _XGI330_LCDDesDataStruct2
+{
+ USHORT LCDHDES;
+ USHORT LCDHRS;
+ USHORT LCDVDES;
+ USHORT LCDVRS;
+ USHORT LCDHSync;
+ USHORT LCDVSync;
+} XGI330_LCDDataDesStruct2;
+
+typedef struct _XGI330_LCDDataStruct
+{
+ USHORT RVBHCMAX;
+ USHORT RVBHCFACT;
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT LCDHT;
+ USHORT LCDVT;
+} XGI330_LCDDataStruct;
+
+
+typedef struct _XGI330_TVDataStruct
+{
+ USHORT RVBHCMAX;
+ USHORT RVBHCFACT;
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT TVHDE;
+ USHORT TVVDE;
+ USHORT RVBHRS;
+ UCHAR FlickerMode;
+ USHORT HALFRVBHRS;
+} XGI330_TVDataStruct;
+
+typedef struct _XGI330_LCDDataTablStruct
+{
+ UCHAR PANELID;
+ USHORT MASK;
+ USHORT CAP;
+ USHORT DATAPTR;
+} XGI330_LCDDataTablStruct;
+
+typedef struct _XGI330_TVDataTablStruct
+{
+ USHORT MASK;
+ USHORT CAP;
+ USHORT DATAPTR;
+} XGI330_TVDataTablStruct;
+
+
+typedef struct _XGI330_CHTVDataStruct
+{
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT LCDHT;
+ USHORT LCDVT;
+} XGI330_CHTVDataStruct;
+
+typedef struct _XGI_TimingHStruct
+{
+ UCHAR data[8];
+} XGI_TimingHStruct;
+
+typedef struct _XGI_TimingVStruct
+{
+ UCHAR data[7];
+} XGI_TimingVStruct;
+
+typedef struct _XGI_CH7007TV_TimingHStruct
+{
+ UCHAR data[10];
+} XGI_CH7007TV_TimingHStruct;
+
+typedef struct _XGI_CH7007TV_TimingVStruct
+{
+ UCHAR data[10];
+} XGI_CH7007TV_TimingVStruct;
+
+typedef struct _XGI_XG21CRT1Struct
+{
+ UCHAR ModeID,CR02,CR03,CR15,CR16;
+} XGI_XG21CRT1Struct;
+
+typedef struct _XGI330_CHTVRegDataStruct
+{
+ UCHAR Reg[16];
+} XGI330_CHTVRegDataStruct;
+
+typedef struct _XGI330_LCDCapStruct
+{
+ UCHAR LCD_ID;
+ USHORT LCD_Capability;
+ UCHAR LCD_SetFlag;
+ UCHAR LCD_DelayCompensation;
+ UCHAR LCD_HSyncWidth;
+ UCHAR LCD_VSyncWidth;
+ UCHAR LCD_VCLK;
+ UCHAR LCDA_VCLKData1;
+ UCHAR LCDA_VCLKData2;
+ UCHAR LCUCHAR_VCLKData1;
+ UCHAR LCUCHAR_VCLKData2;
+ UCHAR PSC_S1;
+ UCHAR PSC_S2;
+ UCHAR PSC_S3;
+ UCHAR PSC_S4;
+ UCHAR PSC_S5;
+ UCHAR PWD_2B;
+ UCHAR PWD_2C;
+ UCHAR PWD_2D;
+ UCHAR PWD_2E;
+ UCHAR PWD_2F;
+ UCHAR Spectrum_31;
+ UCHAR Spectrum_32;
+ UCHAR Spectrum_33;
+ UCHAR Spectrum_34;
+} XGI330_LCDCapStruct;
+
+typedef struct _XGI21_LVDSCapStruct
+{
+ USHORT LVDS_Capability;
+ USHORT LVDSHT;
+ USHORT LVDSVT;
+ USHORT LVDSHDE;
+ USHORT LVDSVDE;
+ USHORT LVDSHFP;
+ USHORT LVDSVFP;
+ USHORT LVDSHSYNC;
+ USHORT LVDSVSYNC;
+ UCHAR VCLKData1;
+ UCHAR VCLKData2;
+ UCHAR PSC_S1;
+ UCHAR PSC_S2;
+ UCHAR PSC_S3;
+ UCHAR PSC_S4;
+ UCHAR PSC_S5;
+} XGI21_LVDSCapStruct;
+
+typedef struct _XGI_CRT1TableStruct
+{
+ UCHAR CR[16];
+} XGI_CRT1TableStruct;
+
+
+typedef struct _XGI330_VCLKDataStruct
+{
+ UCHAR SR2B,SR2C;
+ USHORT CLOCK;
+} XGI330_VCLKDataStruct;
+
+typedef struct _XGI301C_Tap4TimingStruct
+{
+ USHORT DE;
+ UCHAR Reg[64]; /* C0-FF */
+} XGI301C_Tap4TimingStruct;
+
+typedef struct _XGI_New_StandTableStruct
+{
+ UCHAR CRT_COLS;
+ UCHAR ROWS;
+ UCHAR CHAR_HEIGHT;
+ USHORT CRT_LEN;
+ UCHAR SR[4];
+ UCHAR MISC;
+ UCHAR CRTC[0x19];
+ UCHAR ATTR[0x14];
+ UCHAR GRC[9];
+} XGI_New_StandTableStruct;
+
+typedef UCHAR DRAM8Type[8];
+typedef UCHAR DRAM4Type[4];
+typedef UCHAR DRAM32Type[32];
+typedef UCHAR DRAM2Type[2];
+
+typedef struct _VB_DEVICE_INFO VB_DEVICE_INFO;
+typedef VB_DEVICE_INFO * PVB_DEVICE_INFO;
+
+struct _VB_DEVICE_INFO
+{
+ BOOLEAN ISXPDOS;
+ ULONG P3c4,P3d4,P3c0,P3ce,P3c2,P3cc;
+ ULONG P3ca,P3c6,P3c7,P3c8,P3c9,P3da;
+ ULONG Part0Port,Part1Port,Part2Port;
+ ULONG Part3Port,Part4Port,Part5Port;
+ USHORT RVBHCFACT,RVBHCMAX,RVBHRS;
+ USHORT VGAVT,VGAHT,VGAVDE,VGAHDE;
+ USHORT VT,HT,VDE,HDE;
+ USHORT LCDHRS,LCDVRS,LCDHDES,LCDVDES;
+
+ USHORT ModeType;
+ USHORT IF_DEF_LVDS,IF_DEF_TRUMPION,IF_DEF_DSTN;/* ,IF_DEF_FSTN; add for dstn */
+ USHORT IF_DEF_CRT2Monitor,IF_DEF_VideoCapture;
+ USHORT IF_DEF_LCDA,IF_DEF_CH7017,IF_DEF_YPbPr,IF_DEF_ScaleLCD,IF_DEF_OEMUtil,IF_DEF_PWD;
+ USHORT IF_DEF_ExpLink;
+ USHORT IF_DEF_CH7005,IF_DEF_HiVision;
+ USHORT IF_DEF_CH7007; /* Billy 2007/05/03 */
+ USHORT LCDResInfo,LCDTypeInfo, VBType;/*301b*/
+ USHORT VBInfo,TVInfo,LCDInfo, Set_VGAType;
+ USHORT VBExtInfo;/*301lv*/
+ USHORT SetFlag;
+ USHORT NewFlickerMode;
+ USHORT SelectCRT2Rate;
+
+ PUCHAR ROMAddr;
+ PUCHAR FBAddr;
+ ULONG BaseAddr;
+ ULONG RelIO;
+
+ DRAM4Type *CR6B;
+ DRAM4Type *CR6E;
+ DRAM32Type *CR6F;
+ DRAM2Type *CR89;
+
+ DRAM8Type *SR15; /* pointer : point to array */
+ DRAM8Type *CR40;
+ UCHAR *pSoftSetting;
+ UCHAR *pOutputSelect;
+
+ USHORT *pRGBSenseData;
+ USHORT *pRGBSenseData2; /*301b*/
+ USHORT *pVideoSenseData;
+ USHORT *pVideoSenseData2;
+ USHORT *pYCSenseData;
+ USHORT *pYCSenseData2;
+
+ UCHAR *pSR07;
+ UCHAR *CR49;
+ UCHAR *pSR1F;
+ UCHAR *AGPReg;
+ UCHAR *SR16;
+ UCHAR *pSR21;
+ UCHAR *pSR22;
+ UCHAR *pSR23;
+ UCHAR *pSR24;
+ UCHAR *SR25;
+ UCHAR *pSR31;
+ UCHAR *pSR32;
+ UCHAR *pSR33;
+ UCHAR *pSR36; /* alan 12/07/2006 */
+ UCHAR *pCRCF;
+ UCHAR *pCRD0; /* alan 12/07/2006 */
+ UCHAR *pCRDE; /* alan 12/07/2006 */
+ UCHAR *pCR8F; /* alan 12/07/2006 */
+ UCHAR *pSR40; /* alan 12/07/2006 */
+ UCHAR *pSR41; /* alan 12/07/2006 */
+ UCHAR *pDVOSetting;
+ UCHAR *pCR2E;
+ UCHAR *pCR2F;
+ UCHAR *pCR46;
+ UCHAR *pCR47;
+ UCHAR *pCRT2Data_1_2;
+ UCHAR *pCRT2Data_4_D;
+ UCHAR *pCRT2Data_4_E;
+ UCHAR *pCRT2Data_4_10;
+ XGI_MCLKDataStruct *MCLKData;
+ XGI_ECLKDataStruct *ECLKData;
+
+ UCHAR *XGI_TVDelayList;
+ UCHAR *XGI_TVDelayList2;
+ UCHAR *CHTVVCLKUNTSC;
+ UCHAR *CHTVVCLKONTSC;
+ UCHAR *CHTVVCLKUPAL;
+ UCHAR *CHTVVCLKOPAL;
+ UCHAR *NTSCTiming;
+ UCHAR *PALTiming;
+ UCHAR *HiTVExtTiming;
+ UCHAR *HiTVSt1Timing;
+ UCHAR *HiTVSt2Timing;
+ UCHAR *HiTVTextTiming;
+ UCHAR *YPbPr750pTiming;
+ UCHAR *YPbPr525pTiming;
+ UCHAR *YPbPr525iTiming;
+ UCHAR *HiTVGroup3Data;
+ UCHAR *HiTVGroup3Simu;
+ UCHAR *HiTVGroup3Text;
+ UCHAR *Ren525pGroup3;
+ UCHAR *Ren750pGroup3;
+ UCHAR *ScreenOffset;
+ UCHAR *pXGINew_DRAMTypeDefinition;
+ UCHAR *pXGINew_I2CDefinition ;
+ UCHAR *pXGINew_CR97 ;
+
+ XGI330_LCDCapStruct *LCDCapList;
+ XGI21_LVDSCapStruct *XG21_LVDSCapList;
+
+ XGI_TimingHStruct *TimingH;
+ XGI_TimingVStruct *TimingV;
+
+ XGI_StStruct *SModeIDTable;
+ XGI_StandTableStruct *StandTable;
+ XGI_ExtStruct *EModeIDTable;
+ XGI_Ext2Struct *RefIndex;
+ /* XGINew_CRT1TableStruct *CRT1Table; */
+ XGI_CRT1TableStruct *XGINEWUB_CRT1Table;
+ XGI_VCLKDataStruct *VCLKData;
+ XGI_VBVCLKDataStruct *VBVCLKData;
+ XGI_StResInfoStruct *StResInfo;
+ XGI_ModeResInfoStruct *ModeResInfo;
+ XGI_XG21CRT1Struct *UpdateCRT1;
+}; /* _VB_DEVICE_INFO */
+
+
+typedef struct
+{
+ USHORT Horizontal_ACTIVE;
+ USHORT Horizontal_FP;
+ USHORT Horizontal_SYNC;
+ USHORT Horizontal_BP;
+ USHORT Vertical_ACTIVE;
+ USHORT Vertical_FP;
+ USHORT Vertical_SYNC;
+ USHORT Vertical_BP;
+ double DCLK;
+ UCHAR FrameRate;
+ UCHAR Interlace;
+ USHORT Margin;
+} TimingInfo;
+
+#define _VB_STRUCT_
+#endif /* _VB_STRUCT_ */
diff --git a/drivers/staging/xgifb/vb_table.h b/drivers/staging/xgifb/vb_table.h
new file mode 100644
index 0000000..781caef
--- /dev/null
+++ b/drivers/staging/xgifb/vb_table.h
@@ -0,0 +1,4406 @@
+#define Tap4
+
+
+XGI_MCLKDataStruct XGI330New_MCLKData[]=
+{
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166},
+ { 0x7C,0x08,0x80,200},
+ { 0x79,0x06,0x80,250},
+ { 0x29,0x01,0x81,300},
+ { 0x29,0x01,0x81,300},
+ { 0x29,0x01,0x81,300},
+ { 0x29,0x01,0x81,300}
+};
+//yilin modify for xgi20
+XGI_MCLKDataStruct XGI340New_MCLKData[]=
+{
+ { 0x16,0x01,0x01,166},
+ { 0x19,0x02,0x01,124},
+ { 0x7C,0x08,0x01,200},
+ { 0x79,0x06,0x01,250},
+ { 0x29,0x01,0x81,301},
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166}
+};
+
+XGI_MCLKDataStruct XGI27New_MCLKData[]=
+{
+ { 0x5c,0x23,0x01,166},
+ { 0x19,0x02,0x01,124},
+ { 0x7C,0x08,0x80,200},
+ { 0x79,0x06,0x80,250},
+ { 0x29,0x01,0x81,300},
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166}
+};
+
+XGI_ECLKDataStruct XGI330_ECLKData[]=
+{
+ { 0x7c,0x08,0x01,200},
+ { 0x7c,0x08,0x01,200},
+ { 0x7C,0x08,0x80,200},
+ { 0x79,0x06,0x80,250},
+ { 0x29,0x01,0x81,300},
+ { 0x29,0x01,0x81,300},
+ { 0x29,0x01,0x81,300},
+ { 0x29,0x01,0x81,300}
+};
+//yilin modify for xgi20
+XGI_ECLKDataStruct XGI340_ECLKData[]=
+{
+ { 0x5c,0x23,0x01,166},
+ { 0x55,0x84,0x01,123},
+ { 0x7C,0x08,0x01,200},
+ { 0x79,0x06,0x01,250},
+ { 0x29,0x01,0x81,301},
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166}
+};
+
+
+
+UCHAR XGI340_SR13[4][8]={
+{0x35,0x45,0xb1,0x00,0x00,0x00,0x00,0x00},/* SR13 */
+{0x41,0x51,0x5c,0x00,0x00,0x00,0x00,0x00},/* SR14 */
+{0x31,0x42,0x42,0x00,0x00,0x00,0x00,0x00},/* SR18 */
+{0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00}/* SR1B */
+};
+
+UCHAR XGI340_cr41[24][8]=
+{{0x20,0x50,0x60,0x00,0x00,0x00,0x00,0x00},/* 0 CR41 */
+{0xc4,0x40,0x84,0x00,0x00,0x00,0x00,0x00},/* 1 CR8A */
+{0xc4,0x40,0x84,0x00,0x00,0x00,0x00,0x00},/* 2 CR8B */
+{0xb5,0xa4,0xa4,0x00,0x00,0x00,0x00,0x00},
+{0xf0,0xf0,0xf0,0x00,0x00,0x00,0x00,0x00},
+{0x90,0x90,0x24,0x00,0x00,0x00,0x00,0x00},/* 5 CR68 */
+{0x77,0x77,0x44,0x00,0x00,0x00,0x00,0x00},/* 6 CR69 */
+{0x77,0x77,0x44,0x00,0x00,0x00,0x00,0x00},/* 7 CR6A */
+{0xff,0xff,0xff,0x00,0x00,0x00,0x00,0x00},/* 8 CR6D */
+{0x55,0x55,0x55,0x00,0x00,0x00,0x00,0x00},/* 9 CR80 */
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/* 10 CR81 */
+{0x88,0xa8,0x48,0x00,0x00,0x00,0x00,0x00},/* 11 CR82 */
+{0x44,0x44,0x77,0x00,0x00,0x00,0x00,0x00},/* 12 CR85 */
+{0x48,0x48,0x88,0x00,0x00,0x00,0x00,0x00},/* 13 CR86 */
+{0x54,0x54,0x44,0x00,0x00,0x00,0x00,0x00},/* 14 CR90 */
+{0x54,0x54,0x44,0x00,0x00,0x00,0x00,0x00},/* 15 CR91 */
+{0x0a,0x0a,0x07,0x00,0x00,0x00,0x00,0x00},/* 16 CR92 */
+{0x44,0x44,0x44,0x00,0x00,0x00,0x00,0x00},/* 17 CR93 */
+{0x10,0x10,0x0A,0x00,0x00,0x00,0x00,0x00},/* 18 CR94 */
+{0x11,0x11,0x0a,0x00,0x00,0x00,0x00,0x00},/* 19 CR95 */
+{0x05,0x05,0x05,0x00,0x00,0x00,0x00,0x00},/* 20 CR96 */
+{0xf0,0xf0,0xf0,0x00,0x00,0x00,0x00,0x00},/* 21 CRC3 */
+{0x05,0x00,0x02,0x00,0x00,0x00,0x00,0x00},/* 22 CRC4 */
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}/* 23 CRC5 */
+};
+
+
+UCHAR XGI27_cr41[24][8]=
+{
+{0x20,0x40,0x60,0x00,0x00,0x00,0x00,0x00},/* 0 CR41 */
+{0xC4,0x40,0x84,0x00,0x00,0x00,0x00,0x00},/* 1 CR8A */
+{0xC4,0x40,0x84,0x00,0x00,0x00,0x00,0x00},/* 2 CR8B */
+{0xB5,0x13,0xa4,0x00,0x00,0x00,0x00,0x00},/* 3 CR40[7],CR99[2:0],CR45[3:0]*/
+{0xf0,0xf5,0xf0,0x00,0x00,0x00,0x00,0x00},/* 4 CR59 */
+{0x90,0x90,0x24,0x00,0x00,0x00,0x00,0x00},/* 5 CR68 */
+{0x77,0x67,0x44,0x00,0x00,0x00,0x00,0x00},/* 6 CR69 */
+{0x77,0x77,0x44,0x00,0x00,0x00,0x00,0x00},/* 7 CR6A */
+{0xff,0xff,0xff,0x00,0x00,0x00,0x00,0x00},/* 8 CR6D */
+{0x55,0x55,0x55,0x00,0x00,0x00,0x00,0x00},/* 9 CR80 */
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/* 10 CR81 */
+{0x88,0xcc,0x48,0x00,0x00,0x00,0x00,0x00},/* 11 CR82 */
+{0x44,0x88,0x77,0x00,0x00,0x00,0x00,0x00},/* 12 CR85 */
+{0x48,0x88,0x88,0x00,0x00,0x00,0x00,0x00},/* 13 CR86 */
+{0x54,0x32,0x44,0x00,0x00,0x00,0x00,0x00},/* 14 CR90 */
+{0x54,0x33,0x44,0x00,0x00,0x00,0x00,0x00},/* 15 CR91 */
+{0x0a,0x07,0x07,0x00,0x00,0x00,0x00,0x00},/* 16 CR92 */
+{0x44,0x63,0x44,0x00,0x00,0x00,0x00,0x00},/* 17 CR93 */
+{0x10,0x14,0x0A,0x00,0x00,0x00,0x00,0x00},/* 18 CR94 */
+{0x11,0x0B,0x0C,0x00,0x00,0x00,0x00,0x00},/* 19 CR95 */
+{0x05,0x22,0x05,0x00,0x00,0x00,0x00,0x00},/* 20 CR96 */
+{0xf0,0xf0,0x00,0x00,0x00,0x00,0x00,0x00},/* 21 CRC3 */
+{0x05,0x00,0x02,0x00,0x00,0x00,0x00,0x00},/* 22 CRC4 */
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}/* 23 CRC5 */
+};
+
+
+#if 0
+UCHAR XGI27_cr41[24][8]=
+{
+{0x20,0x60,0x60,0x00,0x00,0x00,0x00,0x00},/* 0 CR41 */
+{0x04,0x44,0x84,0x00,0x00,0x00,0x00,0x00},/* 1 CR8A */
+{0x04,0x40,0x84,0x00,0x00,0x00,0x00,0x00},/* 2 CR8B */
+{0xb5,0x03,0xa4,0x00,0x00,0x00,0x00,0x00},/* 3 CR40[7],CR99[2:0],CR45[3:0]*/
+{0xf0,0xf5,0xf0,0x00,0x00,0x00,0x00,0x00},/* 4 CR59 */
+{0xa4,0x1C,0x24,0x00,0x00,0x00,0x00,0x00},/* 5 CR68 */
+{0x77,0x77,0x44,0x00,0x00,0x00,0x00,0x00},/* 6 CR69 */
+{0x77,0x77,0x44,0x00,0x00,0x00,0x00,0x00},/* 7 CR6A */
+{0xff,0xff,0xff,0x00,0x00,0x00,0x00,0x00},/* 8 CR6D */
+{0x55,0x55,0x55,0x00,0x00,0x00,0x00,0x00},/* 9 CR80 */
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/* 10 CR81 */
+{0x48,0xa8,0x48,0x00,0x00,0x00,0x00,0x00},/* 11 CR82 */
+{0x77,0x88,0x77,0x00,0x00,0x00,0x00,0x00},/* 12 CR85 */
+{0x88,0x88,0x88,0x00,0x00,0x00,0x00,0x00},/* 13 CR86 */
+{0x44,0x32,0x44,0x00,0x00,0x00,0x00,0x00},/* 14 CR90 */
+{0x44,0x33,0x44,0x00,0x00,0x00,0x00,0x00},/* 15 CR91 */
+{0x07,0x07,0x07,0x00,0x00,0x00,0x00,0x00},/* 16 CR92 */
+{0x44,0x63,0x44,0x00,0x00,0x00,0x00,0x00},/* 17 CR93 */
+{0x0A,0x14,0x0A,0x00,0x00,0x00,0x00,0x00},/* 18 CR94 */
+{0x0C,0x0B,0x0C,0x00,0x00,0x00,0x00,0x00},/* 19 CR95 */
+{0x05,0x22,0x05,0x00,0x00,0x00,0x00,0x00},/* 20 CR96 */
+{0xf0,0xf0,0xf0,0x00,0x00,0x00,0x00,0x00},/* 21 CRC3 */
+{0x03,0x00,0x02,0x00,0x00,0x00,0x00,0x00},/* 22 CRC4 */
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}/* 23 CRC5 */
+};
+#endif
+UCHAR XGI340_CR6B[8][4]={
+{0xaa,0xaa,0xaa,0xaa},
+{0xaa,0xaa,0xaa,0xaa},
+{0xaa,0xaa,0xaa,0xaa},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00}
+};
+
+UCHAR XGI340_CR6E[8][4]={
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00}
+};
+
+UCHAR XGI340_CR6F[8][32]={
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}
+};
+
+UCHAR XGI340_CR89[8][2]={
+{0x00,0x00},
+{0x00,0x00},
+{0x00,0x00},
+{0x00,0x00},
+{0x00,0x00},
+{0x00,0x00},
+{0x00,0x00},
+{0x00,0x00}
+};
+ /* CR47,CR48,CR49,CR4A,CR4B,CR4C,CR70,CR71,CR74,CR75,CR76,CR77 */
+UCHAR XGI340_AGPReg[12]={0x28,0x23,0x00,0x20,0x00,0x20,0x00,0x05,0xd0,0x10,0x10,0x00};
+
+UCHAR XGI340_SR16[4]={0x03,0x83,0x03,0x83};
+
+UCHAR XGI330_SR15_1[8][8]={
+{0x0,0x0,0x00,0x00,0x20,0x20,0x00,0x00},
+{0x5,0x15,0x15,0x15,0x15,0x15,0x00,0x00},
+{0xba,0xba,0xba,0xba,0xBA,0xBA,0x00,0x00},
+{0x55,0x57,0x57,0xAB,0xAB,0xAB,0x00,0x00},
+{0x60,0x34,0x34,0x34,0x34,0x34,0x00,0x00},
+{0x0,0x80,0x80,0x80,0x83,0x83,0x00,0x00},
+{0x50,0x50,0x50,0x3C,0x3C,0x3C,0x00,0x00},
+{0x0,0xa5,0xfb,0xf6,0xF6,0xF6,0x00,0x00}
+};
+
+UCHAR XGI330_cr40_1[15][8]={
+{0x66,0x40,0x40,0x28,0x24,0x24,0x00,0x00},
+{0x66,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x0F,0x0F,0x00,0x00},
+{0x00,0xf0,0xf0,0xf0,0xF0,0xF0,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x10,0x10,0x10,0x10,0x20,0x20,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x88,0x88,0x88,0xAA,0xAC,0xAC,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x77,0x77,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0xA2,0x00,0x00,0xA2,0xA2,0x00,0x00},
+};
+
+UCHAR XGI330_sr25[]={0x00,0x0};
+UCHAR XGI330_sr31=0xc0;
+UCHAR XGI330_sr32=0x11;
+UCHAR XGI330_SR33=0x00;
+UCHAR XG40_CRCF=0x13;
+UCHAR XG40_DRAMTypeDefinition=0xFF ;
+
+XGI_StStruct XGI330_SModeIDTable[]=
+{
+ {0x01,0x9208,0x01,0x00,0x10,0x00,0x00,0x01,0x00},
+ {0x01,0x1210,0x14,0x01,0x00,0x01,0x00,0x01,0x00},
+ {0x01,0x1010,0x17,0x02,0x11,0x00,0x00,0x01,0x01},
+ {0x03,0x8208,0x03,0x00,0x14,0x00,0x00,0x01,0x02},
+ {0x03,0x0210,0x16,0x01,0x04,0x01,0x00,0x01,0x02},
+ {0x03,0x0010,0x18,0x02,0x15,0x00,0x00,0x01,0x03},
+ {0x05,0x9209,0x05,0x00,0x10,0x00,0x00,0x00,0x04},
+ {0x06,0x8209,0x06,0x00,0x14,0x00,0x00,0x00,0x05},
+ {0x07,0x0000,0x07,0x03,0x05,0x03,0x00,0x01,0x03},
+ {0x07,0x0000,0x19,0x02,0x15,0x02,0x00,0x01,0x03},
+ {0x0d,0x920a,0x0d,0x00,0x10,0x00,0x00,0x00,0x04},
+ {0x0e,0x820a,0x0e,0x00,0x14,0x00,0x00,0x00,0x05},
+ {0x0f,0x0202,0x11,0x01,0x04,0x01,0x00,0x00,0x05},
+ {0x10,0x0212,0x12,0x01,0x04,0x01,0x00,0x00,0x05},
+ {0x11,0x0212,0x1a,0x04,0x24,0x04,0x00,0x00,0x05},
+ {0x12,0x0212,0x1b,0x04,0x24,0x04,0x00,0x00,0x05},
+ {0x13,0x021b,0x1c,0x00,0x14,0x00,0x00,0x00,0x04},
+ {0x12,0x0010,0x18,0x02,0x24,0x02,0x00,0x00,0x05},/* St_CRT2CRTC2 not sure */
+ {0x12,0x0210,0x18,0x01,0x24,0x01,0x00,0x00,0x05},/* St_CRT2CRTC2 not sure */
+ {0xff,0x0000,0x00,0x00,0x00,0x00,0x00,0x00,0x00}
+};
+
+
+XGI_ExtStruct XGI330_EModeIDTable[]=
+{
+ {0x6a,0x2212,0x0407,0x3a81,0x0102,0x08,0x07,0x00,0x00,0x07,0x0e},
+ {0x2e,0x0a1b,0x0306,0x3a57,0x0101,0x08,0x06,0x00,0x00,0x05,0x06},
+ {0x2f,0x0a1b,0x0305,0x3a50,0x0100,0x08,0x05,0x00,0x00,0x05,0x05},
+ {0x30,0x2a1b,0x0407,0x3a81,0x0103,0x08,0x07,0x00,0x00,0x07,0x0e},
+ {0x31,0x0a1b,0x030d,0x3b85,0x0000,0x08,0x0d,0x00,0x00,0x06,0x3d},
+ {0x32,0x0a1b,0x0a0e,0x3b8c,0x0000,0x08,0x0e,0x00,0x00,0x06,0x3e},
+ {0x33,0x0a1d,0x0a0d,0x3b85,0x0000,0x08,0x0d,0x00,0x00,0x06,0x3d},
+ {0x34,0x2a1d,0x0a0e,0x3b8c,0x0000,0x08,0x0e,0x00,0x00,0x06,0x3e},
+ {0x35,0x0a1f,0x0a0d,0x3b85,0x0000,0x08,0x0d,0x00,0x00,0x06,0x3d},
+ {0x36,0x2a1f,0x0a0e,0x3b8c,0x0000,0x08,0x0e,0x00,0x00,0x06,0x3e},
+ {0x37,0x0212,0x0508,0x3aab,0x0104,0x08,0x08,0x00,0x00,0x00,0x16},
+ {0x38,0x0a1b,0x0508,0x3aab,0x0105,0x08,0x08,0x00,0x00,0x00,0x16},
+ {0x3a,0x0e3b,0x0609,0x3adc,0x0107,0x08,0x09,0x00,0x00,0x00,0x1e},
+ {0x3c,0x0e3b,0x070a,0x3af2,0x0130,0x08,0x0a,0x00,0x00,0x00,0x22}, /* mode 1600x1200 add CRT2MODE [2003/10/07] */
+ {0x3d,0x0e7d,0x070a,0x3af2,0x0131,0x08,0x0a,0x00,0x00,0x00,0x22}, /* mode 1600x1200 add CRT2MODE */
+ {0x40,0x9a1c,0x0000,0x3a34,0x010d,0x08,0x00,0x00,0x00,0x04,0x00},
+ {0x41,0x9a1d,0x0000,0x3a34,0x010e,0x08,0x00,0x00,0x00,0x04,0x00}, /* ModeIdIndex = 0x10 */
+ {0x43,0x0a1c,0x0306,0x3a57,0x0110,0x08,0x06,0x00,0x00,0x05,0x06},
+ {0x44,0x0a1d,0x0306,0x3a57,0x0111,0x08,0x06,0x00,0x00,0x05,0x06},
+ {0x46,0x2a1c,0x0407,0x3a81,0x0113,0x08,0x07,0x00,0x00,0x07,0x0e},
+ {0x47,0x2a1d,0x0407,0x3a81,0x0114,0x08,0x07,0x00,0x00,0x07,0x0e},
+ {0x49,0x0a3c,0x0508,0x3aab,0x0116,0x08,0x08,0x00,0x00,0x00,0x16},
+ {0x4a,0x0a3d,0x0508,0x3aab,0x0117,0x08,0x08,0x00,0x00,0x00,0x16},
+ {0x4c,0x0e7c,0x0609,0x3adc,0x0119,0x08,0x09,0x00,0x00,0x00,0x1e},
+ {0x4d,0x0e7d,0x0609,0x3adc,0x011a,0x08,0x09,0x00,0x00,0x00,0x1e},
+ {0x50,0x9a1b,0x0001,0x3a3b,0x0132,0x08,0x01,0x00,0x00,0x04,0x02},
+ {0x51,0xba1b,0x0103,0x3a42,0x0133,0x08,0x03,0x00,0x00,0x07,0x03},
+ {0x52,0x9a1b,0x0204,0x3a49,0x0134,0x08,0x04,0x00,0x00,0x00,0x04},
+ {0x56,0x9a1d,0x0001,0x3a3b,0x0135,0x08,0x01,0x00,0x00,0x04,0x02},
+ {0x57,0xba1d,0x0103,0x3a42,0x0136,0x08,0x03,0x00,0x00,0x07,0x03},
+ {0x58,0x9a1d,0x0204,0x3a49,0x0137,0x08,0x04,0x00,0x00,0x00,0x04},
+ {0x59,0x9a1b,0x0000,0x3a34,0x0138,0x08,0x00,0x00,0x00,0x04,0x00},
+ {0x5A,0x021b,0x0014,0x3b83,0x0138,0x08,0x01,0x00,0x00,0x04,0x3f}, /* ModeIdIndex = 0x20 */
+ {0x5B,0x0a1d,0x0014,0x3b83,0x0135,0x08,0x01,0x00,0x00,0x04,0x3f},
+ {0x5d,0x0a1d,0x0305,0x3a50,0x0139,0x08,0x05,0x00,0x00,0x07,0x05},
+ {0x62,0x0a3f,0x0306,0x3a57,0x013a,0x08,0x06,0x00,0x00,0x05,0x06},
+ {0x63,0x2a3f,0x0407,0x3a81,0x013b,0x08,0x07,0x00,0x00,0x07,0x0e},
+ {0x64,0x0a7f,0x0508,0x3aab,0x013c,0x08,0x08,0x00,0x00,0x00,0x16},
+ {0x65,0x0eff,0x0609,0x3adc,0x013d,0x08,0x09,0x00,0x00,0x00,0x1e},
+ {0x66,0x0eff,0x070a,0x3af2,0x013e,0x08,0x0a,0x00,0x00,0x00,0x22}, /* mode 1600x1200 add CRT2MODE */
+ {0x68,0x067b,0x080b,0x3b17,0x013f,0x08,0x0b,0x00,0x00,0x00,0x29},
+ {0x69,0x06fd,0x080b,0x3b17,0x0140,0x08,0x0b,0x00,0x00,0x00,0x29},
+ {0x6b,0x07ff,0x080b,0x3b17,0x0141,0x10,0x0b,0x00,0x00,0x00,0x29},
+ {0x6c,0x067b,0x090c,0x3b37,0x0000,0x08,0x0c,0x00,0x00,0x00,0x2f},
+ {0x6d,0x06fd,0x090c,0x3b37,0x0000,0x10,0x0c,0x00,0x00,0x00,0x2f},
+ {0x6e,0x07ff,0x090c,0x3b37,0x0000,0x10,0x0c,0x00,0x00,0x00,0x2f},
+ {0x70,0x2a1b,0x0410,0x3b52,0x0000,0x08,0x10,0x00,0x00,0x07,0x34},
+ {0x71,0x0a1b,0x0511,0x3b63,0x0000,0x08,0x11,0x00,0x00,0x00,0x37},
+ {0x74,0x0a1d,0x0511,0x3b63,0x0000,0x08,0x11,0x00,0x00,0x00,0x37}, /* ModeIdIndex = 0x30 */
+ {0x75,0x0a3d,0x0612,0x3b74,0x0000,0x08,0x12,0x00,0x00,0x00,0x3a},
+ {0x76,0x2a1f,0x0410,0x3b52,0x0000,0x08,0x10,0x00,0x00,0x07,0x34},
+ {0x77,0x0a1f,0x0511,0x3b63,0x0000,0x08,0x11,0x00,0x00,0x00,0x37},
+ {0x78,0x0a3f,0x0612,0x3b74,0x0000,0x08,0x12,0x00,0x00,0x00,0x3a},
+ {0x79,0x0a3b,0x0612,0x3b74,0x0000,0x08,0x12,0x00,0x00,0x00,0x3a},
+ {0x7a,0x2a1d,0x0410,0x3b52,0x0000,0x08,0x10,0x00,0x00,0x07,0x34},
+ {0x7b,0x0e3b,0x060f,0x3ad0,0x0000,0x08,0x0f,0x00,0x00,0x00,0x1d},
+ {0x7c,0x0e7d,0x060f,0x3ad0,0x0000,0x08,0x0f,0x00,0x00,0x00,0x1d},
+ {0x7d,0x0eff,0x060f,0x3ad0,0x0000,0x08,0x0f,0x00,0x00,0x00,0x1d},
+ {0x20,0x0e3b,0x0D16,0x49e0,0x0000,0x08,0x16,0x00,0x00,0x00,0x43},
+ {0x21,0x0e7d,0x0D16,0x49e0,0x0000,0x08,0x16,0x00,0x00,0x00,0x43},
+ {0x22,0x0eff,0x0D16,0x49e0,0x0000,0x08,0x16,0x00,0x00,0x00,0x43},
+ {0x23,0x0e3b,0x0614,0x49d5,0x0000,0x08,0x14,0x00,0x00,0x00,0x41},
+ {0x24,0x0e7d,0x0614,0x49d5,0x0000,0x08,0x14,0x00,0x00,0x00,0x41},
+ {0x25,0x0eff,0x0614,0x49d5,0x0000,0x08,0x14,0x00,0x00,0x00,0x41},
+ {0x26,0x063b,0x0c15,0x49dc,0x0000,0x08,0x15,0x00,0x00,0x00,0x42}, /* ModeIdIndex = 0x40 */
+ {0x27,0x067d,0x0c15,0x49dc,0x0000,0x08,0x15,0x00,0x00,0x00,0x42},
+ {0x28,0x06ff,0x0c15,0x49dc,0x0000,0x08,0x15,0x00,0x00,0x00,0x42},
+ {0xff,0x0000,0x0000,0x0000,0x0000,0x00,0x00,0x00,0x00,0x00,0x00}
+};
+
+XGI_StandTableStruct XGI330_StandTable[]=
+{
+/* MD_0_200 */
+ {
+ 0x28,0x18,0x08,0x0800,
+ {0x09,0x03,0x00,0x02},
+ 0x63,
+ {0x2d,0x27,0x28,0x90,0x2b,0xa0,0xbf,0x1f,
+ 0x00,0xc7,0x06,0x07,0x00,0x00,0x00,0x00,
+ 0x9c,0x8e,0x8f,0x14,0x1f,0x96,0xb9,0xa3,
+ 0xff},
+ {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+ 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+ 0x08,0x00,0x0f,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+ 0xff}
+ },
+/* MD_1_200 */
+ {
+ 0x28,0x18,0x08,0x0800,
+ {0x09,0x03,0x00,0x02},
+ 0x63,
+ {0x2d,0x27,0x28,0x90,0x2b,0xa0,0xbf,0x1f,
+ 0x00,0xc7,0x06,0x07,0x00,0x00,0x00,0x00,
+ 0x9c,0x8e,0x8f,0x14,0x1f,0x96,0xb9,0xa3,
+ 0xff},
+ {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+ 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+ 0x08,0x00,0x0f,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+ 0xff}
+ },
+/* MD_2_200 */
+ {
+ 0x50,0x18,0x08,0x1000,
+ {0x01,0x03,0x00,0x02},
+ 0x63,
+ {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+ 0x00,0xc7,0x06,0x07,0x00,0x00,0x00,0x00,
+ 0x9c,0x8e,0x8f,0x28,0x1f,0x96,0xb9,0xa3,
+ 0xff},
+ {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+ 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+ 0x08,0x00,0x0f,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+ 0xff}
+ },
+/* MD_3_200 */
+ {
+ 0x50,0x18,0x08,0x1000,
+ {0x01,0x03,0x00,0x02},
+ 0x63,
+ {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+ 0x00,0xc7,0x06,0x07,0x00,0x00,0x00,0x00,
+ 0x9c,0x8e,0x8f,0x28,0x1f,0x96,0xb9,0xa3,
+ 0xff},
+ {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+ 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+ 0x08,0x00,0x0f,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+ 0xff}
+ },
+/* MD_4 */
+ {
+ 0x28,0x18,0x08,0x4000,
+ {0x09,0x03,0x00,0x02},
+ 0x63,
+ {0x2d,0x27,0x28,0x90,0x2c,0x80,0xbf,0x1f,
+ 0x00,0xc1,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x9c,0x8e,0x8f,0x14,0x00,0x96,0xb9,0xa2,
+ 0xff},
+ {0x00,0x13,0x15,0x17,0x02,0x04,0x06,0x07,
+ 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+ 0x01,0x00,0x03,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x30,0x0f,0x00,
+ 0xff}
+ },
+/* MD_5 */
+ {
+ 0x28,0x18,0x08,0x4000,
+ {0x09,0x03,0x00,0x02},
+ 0x63,
+ {0x2d,0x27,0x28,0x90,0x2c,0x80,0xbf,0x1f,
+ 0x00,0xc1,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x9c,0x8e,0x8f,0x14,0x00,0x96,0xb9,0xa2,
+ 0xff},
+ {0x00,0x13,0x15,0x17,0x02,0x04,0x06,0x07,
+ 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+ 0x01,0x00,0x03,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x30,0x0f,0x00,
+ 0xff}
+ },
+/* MD_6 */
+ {
+ 0x50,0x18,0x08,0x4000,
+ {0x01,0x01,0x00,0x06},
+ 0x63,
+ {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+ 0x00,0xc1,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x9c,0x8e,0x8f,0x28,0x00,0x96,0xb9,0xc2,
+ 0xff},
+ {0x00,0x17,0x17,0x17,0x17,0x17,0x17,0x17,
+ 0x17,0x17,0x17,0x17,0x17,0x17,0x17,0x17,
+ 0x01,0x00,0x01,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x00,0x0d,0x00,
+ 0xff}
+ },
+/* MD_7 */
+ {
+ 0x50,0x18,0x0e,0x1000,
+ {0x00,0x03,0x00,0x03},
+ 0xa6,
+ {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+ 0x00,0x4d,0x0b,0x0c,0x00,0x00,0x00,0x00,
+ 0x83,0x85,0x5d,0x28,0x0d,0x63,0xba,0xa3,
+ 0xff},
+ {0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,
+ 0x10,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
+ 0x0e,0x00,0x0f,0x08},
+ {0x00,0x00,0x00,0x00,0x00,0x10,0x0a,0x00,
+ 0xff}
+ },
+/* MDA_DAC */
+ {
+ 0x00,0x00,0x00,0x0000,
+ {0x00,0x00,0x00,0x15},
+ 0x15,
+ {0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+ 0x15,0x15,0x15,0x15,0x15,0x15,0x3f,0x3f,
+ 0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,0x00,0x00,
+ 0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x15,0x15,0x15,
+ 0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+ 0x15,0x15,0x15,0x15},
+ {0x15,0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,
+ 0x3f}
+ },
+/* CGA_DAC */
+ {
+ 0x00,0x10,0x04,0x0114,
+ {0x11,0x09,0x15,0x00},
+ 0x10,
+ {0x04,0x14,0x01,0x11,0x09,0x15,0x2a,0x3a,
+ 0x2e,0x3e,0x2b,0x3b,0x2f,0x3f,0x2a,0x3a,
+ 0x2e,0x3e,0x2b,0x3b,0x2f,0x3f,0x00,0x10,
+ 0x04},
+ {0x14,0x01,0x11,0x09,0x15,0x00,0x10,0x04,
+ 0x14,0x01,0x11,0x09,0x15,0x2a,0x3a,0x2e,
+ 0x3e,0x2b,0x3b,0x2f},
+ {0x3f,0x2a,0x3a,0x2e,0x3e,0x2b,0x3b,0x2f,
+ 0x3f}
+ },
+/* EGA_DAC */
+ {
+ 0x00,0x10,0x04,0x0114,
+ {0x11,0x05,0x15,0x20},
+ 0x30,
+ {0x24,0x34,0x21,0x31,0x25,0x35,0x08,0x18,
+ 0x0c,0x1c,0x09,0x19,0x0d,0x1d,0x28,0x38,
+ 0x2c,0x3c,0x29,0x39,0x2d,0x3d,0x02,0x12,
+ 0x06},
+ {0x16,0x03,0x13,0x07,0x17,0x22,0x32,0x26,
+ 0x36,0x23,0x33,0x27,0x37,0x0a,0x1a,0x0e,
+ 0x1e,0x0b,0x1b,0x0f},
+ {0x1f,0x2a,0x3a,0x2e,0x3e,0x2b,0x3b,0x2f,
+ 0x3f}
+ },
+/* VGA_DAC */
+ {
+ 0x00,0x10,0x04,0x0114,
+ {0x11,0x09,0x15,0x2a},
+ 0x3a,
+ {0x2e,0x3e,0x2b,0x3b,0x2f,0x3f,0x00,0x05,
+ 0x08,0x0b,0x0e,0x11,0x14,0x18,0x1c,0x20,
+ 0x24,0x28,0x2d,0x32,0x38,0x3f,0x00,0x10,
+ 0x1f},
+ {0x2f,0x3f,0x1f,0x27,0x2f,0x37,0x3f,0x2d,
+ 0x31,0x36,0x3a,0x3f,0x00,0x07,0x0e,0x15,
+ 0x1c,0x0e,0x11,0x15},
+ {0x18,0x1c,0x14,0x16,0x18,0x1a,0x1c,0x00,
+ 0x04}
+ },
+ {
+ 0x08,0x0c,0x10,0x0a08,
+ {0x0c,0x0e,0x10,0x0b},
+ 0x0c,
+ {0x0d,0x0f,0x10,0x10,0x01,0x08,0x00,0x00,
+ 0x00,0x00,0x01,0x00,0x02,0x02,0x01,0x00,
+ 0x04,0x04,0x01,0x00,0x05,0x02,0x05,0x00,
+ 0x06},
+ {0x01,0x06,0x05,0x06,0x00,0x08,0x01,0x08,
+ 0x00,0x07,0x02,0x07,0x06,0x07,0x00,0x00,
+ 0x00,0x00,0x00,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00}
+ },
+/* MD_D */
+ {
+ 0x28,0x18,0x08,0x2000,
+ {0x09,0x0f,0x00,0x06},
+ 0x63,
+ {0x2d,0x27,0x28,0x90,0x2c,0x80,0xbf,0x1f,
+ 0x00,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x9c,0x8e,0x8f,0x14,0x00,0x96,0xb9,0xe3,
+ 0xff},
+ {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+ 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+ 0x01,0x00,0x0f,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x0f,
+ 0xff}
+ },
+/* MD_E */
+ {
+ 0x50,0x18,0x08,0x4000,
+ {0x01,0x0f,0x00,0x06},
+ 0x63,
+ {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+ 0x00,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x9c,0x8e,0x8f,0x28,0x00,0x96,0xb9,0xe3,
+ 0xff},
+ {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+ 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+ 0x01,0x00,0x0f,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x0f,
+ 0xff}
+ },
+/* ExtVGATable */
+ {
+ 0x00,0x00,0x00,0x0000,
+ {0x01,0x0f,0x00,0x0e},
+ 0x23,
+ {0x5f,0x4f,0x50,0x82,0x54,0x80,0x0b,0x3e,
+ 0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0xea,0x8c,0xdf,0x28,0x40,0xe7,0x04,0xa3,
+ 0xff},
+ {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+ 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f,
+ 0x01,0x00,0x00,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,
+ 0xff}
+ },
+/* ROM_SAVEPTR */
+ {
+ 0x9f,0x3b,0x00,0x00c0,
+ {0x00,0x00,0x00,0x00},
+ 0x00,
+ {0x00,0x00,0x00,0x00,0x00,0x00,0xbb,0x3f,
+ 0x00,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x1a,0x00,0xac,0x3e,0x00,0xc0,
+ 0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00}
+ },
+/* MD_F */
+ {
+ 0x50,0x18,0x0e,0x8000,
+ {0x01,0x0f,0x00,0x06},
+ 0xa2,
+ {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+ 0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x82,0x84,0x5d,0x28,0x0f,0x63,0xba,0xe3,
+ 0xff},
+ {0x00,0x08,0x00,0x00,0x18,0x18,0x00,0x00,
+ 0x00,0x08,0x00,0x00,0x00,0x18,0x00,0x00,
+ 0x0b,0x00,0x05,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x05,
+ 0xff}
+ },
+/* MD_10 */
+ {
+ 0x50,0x18,0x0e,0x8000,
+ {0x01,0x0f,0x00,0x06},
+ 0xa3,
+ {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+ 0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x82,0x84,0x5d,0x28,0x0f,0x63,0xba,0xe3,
+ 0xff},
+ {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+ 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+ 0x01,0x00,0x0f,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x0f,
+ 0xff}
+ },
+/* MD_0_350 */
+ {
+ 0x28,0x18,0x0e,0x0800,
+ {0x09,0x03,0x00,0x02},
+ 0xa3,
+ {0x2d,0x27,0x28,0x90,0x2b,0xb1,0xbf,0x1f,
+ 0x00,0x4d,0x0b,0x0c,0x00,0x00,0x00,0x00,
+ 0x83,0x85,0x5d,0x14,0x1f,0x63,0xba,0xa3,
+ 0xff},
+ {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+ 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+ 0x08,0x00,0x0f,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+ 0xff}
+ },
+/* MD_1_350 */
+ {
+ 0x28,0x18,0x0e,0x0800,
+ {0x09,0x03,0x00,0x02},
+ 0xa3,
+ {0x2d,0x27,0x28,0x90,0x2b,0xa0,0xbf,0x1f,
+ 0x00,0x4d,0x0b,0x0c,0x00,0x00,0x00,0x00,
+ 0x83,0x85,0x5d,0x14,0x1f,0x63,0xba,0xa3,
+ 0xff},
+ {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+ 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+ 0x08,0x00,0x0f,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+ 0xff}
+ },
+/* MD_2_350 */
+ {
+ 0x50,0x18,0x0e,0x1000,
+ {0x01,0x03,0x00,0x02},
+ 0xa3,
+ {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+ 0x00,0x4d,0x0b,0x0c,0x00,0x00,0x00,0x00,
+ 0x83,0x85,0x5d,0x28,0x1f,0x63,0xba,0xa3,
+ 0xff},
+ {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+ 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+ 0x08,0x00,0x0f,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+ 0xff}
+ },
+/* MD_3_350 */
+ {
+ 0x50,0x18,0x0e,0x1000,
+ {0x01,0x03,0x00,0x02},
+ 0xa3,
+ {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+ 0x00,0x4d,0x0b,0x0c,0x00,0x00,0x00,0x00,
+ 0x83,0x85,0x5d,0x28,0x1f,0x63,0xba,0xa3,
+ 0xff},
+ {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+ 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+ 0x08,0x00,0x0f,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+ 0xff}
+ },
+/* MD_0_1_400 */
+ {
+ 0x28,0x18,0x10,0x0800,
+ {0x08,0x03,0x00,0x02},
+ 0x67,
+ {0x2d,0x27,0x28,0x90,0x2b,0xb1,0xbf,0x1f,
+ 0x00,0x4f,0x0d,0x0e,0x00,0x00,0x00,0x00,
+ 0x9c,0x8e,0x8f,0x14,0x1f,0x96,0xb9,0xa3,
+ 0xff},
+ {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+ 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+ 0x0c,0x00,0x0f,0x08},
+ {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+ 0xff}
+ },
+/* MD_2_3_400 */
+ {
+ 0x50,0x18,0x10,0x1000,
+ {0x00,0x03,0x00,0x02},
+ 0x67,
+ {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+ 0x00,0x4f,0x0d,0x0e,0x00,0x00,0x00,0x00,
+ 0x9c,0x8e,0x8f,0x28,0x1f,0x96,0xb9,0xa3,
+ 0xff},
+ {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+ 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+ 0x0c,0x00,0x0f,0x08},
+ {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+ 0xff}
+ },
+/* MD_7_400 */
+ {
+ 0x50,0x18,0x10,0x1000,
+ {0x00,0x03,0x00,0x02},
+ 0x66,
+ {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+ 0x00,0x4f,0x0d,0x0e,0x00,0x00,0x00,0x00,
+ 0x9c,0x8e,0x8f,0x28,0x0f,0x96,0xb9,0xa3,
+ 0xff},
+ {0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,
+ 0x10,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
+ 0x0e,0x00,0x0f,0x08},
+ {0x00,0x00,0x00,0x00,0x00,0x10,0x0a,0x00,
+ 0xff}
+ },
+/* MD_11 */
+ {
+ 0x50,0x1d,0x10,0xa000,
+ {0x01,0x0f,0x00,0x06},
+ 0xe3,
+ {0x5f,0x4f,0x50,0x82,0x55,0x81,0x0b,0x3e,
+ 0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0xe9,0x8b,0xdf,0x28,0x00,0xe7,0x04,0xc3,
+ 0xff},
+ {0x00,0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,
+ 0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,
+ 0x01,0x00,0x0f,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x01,
+ 0xff}
+ },
+/* ExtEGATable */
+ {
+ 0x50,0x1d,0x10,0xa000,
+ {0x01,0x0f,0x00,0x06},
+ 0xe3,
+ {0x5f,0x4f,0x50,0x82,0x55,0x81,0x0b,0x3e,
+ 0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0xe9,0x8b,0xdf,0x28,0x00,0xe7,0x04,0xe3,
+ 0xff},
+ {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+ 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+ 0x01,0x00,0x0f,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x0f,
+ 0xff}
+ },
+/* MD_13 */
+ {
+ 0x28,0x18,0x08,0x2000,
+ {0x01,0x0f,0x00,0x0e},
+ 0x63,
+ {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+ 0x00,0x41,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x9c,0x8e,0x8f,0x28,0x40,0x96,0xb9,0xa3,
+ 0xff},
+ {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+ 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f,
+ 0x41,0x00,0x0f,0x00},
+ {0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,
+ 0xff}
+ }
+};
+
+XGI_TimingHStruct XGI_TimingH[]=
+{{{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}}};
+
+XGI_TimingVStruct XGI_TimingV[]=
+{{{0x00,0x00,0x00,0x00,0x00,0x00,0x00}}};
+
+XGI_XG21CRT1Struct XGI_UpdateCRT1Table[]=
+{
+ {0x01,0x27,0x91,0x8f,0xc0}, /* 00 */
+ {0x03,0x4f,0x83,0x8f,0xc0}, /* 01 */
+ {0x05,0x27,0x91,0x8f,0xc0}, /* 02 */
+ {0x06,0x4f,0x83,0x8f,0xc0}, /* 03 */
+ {0x07,0x4f,0x83,0x8f,0xc0}, /* 04 */
+ {0x0d,0x27,0x91,0x8f,0xc0}, /* 05 */
+ {0x0e,0x4f,0x83,0x8f,0xc0}, /* 06 */
+ {0x0f,0x4f,0x83,0x5d,0xc0}, /* 07 */
+ {0x10,0x4f,0x83,0x5d,0xc0}, /* 08 */
+ {0x11,0x4f,0x83,0xdf,0x0c}, /* 09 */
+ {0x12,0x4f,0x83,0xdf,0x0c}, /* 10 */
+ {0x13,0x4f,0x83,0x8f,0xc0}, /* 11 */
+ {0x2e,0x4f,0x83,0xdf,0x0c}, /* 12 */
+ {0x2e,0x4f,0x87,0xdf,0xc0}, /* 13 */
+ {0x2f,0x4f,0x83,0x8f,0xc0}, /* 14 */
+ {0x50,0x27,0x91,0xdf,0x0c}, /* 15 */
+ {0x59,0x27,0x91,0x8f,0xc0} /* 16 */
+};
+
+XGI_CRT1TableStruct XGI_CRT1Table[]=
+{
+ {{0x2d,0x28,0x90,0x2c,0x90,0x00,0x04,0x00,
+ 0xbf,0x1f,0x9c,0x8e,0x96,0xb9,0x30}}, /* 0x0 */
+ {{0x2d,0x28,0x90,0x2c,0x90,0x00,0x04,0x00,
+ 0x0b,0x3e,0xe9,0x8b,0xe7,0x04,0x00}}, /* 0x1 */
+ {{0x3D,0x31,0x81,0x37,0x1F,0x00,0x05,0x00,
+ 0x72,0xF0,0x58,0x8C,0x57,0x73,0xA0}}, /* 0x2 */
+ {{0x4F,0x3F,0x93,0x45,0x0D,0x00,0x01,0x00,
+ 0x24,0xF5,0x02,0x88,0xFF,0x25,0x90}}, /* 0x3 */
+ {{0x5F,0x50,0x82,0x55,0x81,0x00,0x05,0x00,
+ 0xBF,0x1F,0x9C,0x8E,0x96,0xB9,0x30}}, /* 0x4 */
+ {{0x5F,0x50,0x82,0x55,0x81,0x00,0x05,0x00,
+ 0x0B,0x3E,0xE9,0x8B,0xE7,0x04,0x00}}, /* 0x5 */
+ {{0x63,0x50,0x86,0x56,0x9B,0x00,0x01,0x00,
+ 0x06,0x3E,0xE8,0x8B,0xE7,0xFF,0x10}}, /* 0x6 */
+ {{0x64,0x4F,0x88,0x55,0x9D,0x00,0x01,0x00,
+ 0xF2,0x1F,0xE0,0x83,0xDF,0xF3,0x10}}, /* 0x7 */
+ {{0x63,0x4F,0x87,0x5A,0x81,0x00,0x05,0x00,
+ 0xFB,0x1F,0xE0,0x83,0xDF,0xFC,0x10}}, /* 0x8 */
+ {{0x65,0x4F,0x89,0x58,0x80,0x00,0x05,0x60,
+ 0xFB,0x1F,0xE0,0x83,0xDF,0xFC,0x80}}, /* 0x9 */
+ {{0x65,0x4F,0x89,0x58,0x80,0x00,0x05,0x60,
+ 0x01,0x3E,0xE0,0x83,0xDF,0x02,0x80}}, /* 0xa */
+ {{0x67,0x4F,0x8B,0x58,0x81,0x00,0x05,0x60,
+ 0x0D,0x3E,0xE0,0x83,0xDF,0x0E,0x90}}, /* 0xb */
+ {{0x65,0x4F,0x89,0x57,0x9F,0x00,0x01,0x00,
+ 0xFB,0x1F,0xE6,0x8A,0xDF,0xFC,0x10}}, /* 0xc */
+ {{0x7B,0x63,0x9F,0x6A,0x93,0x00,0x05,0x00, /* ; 0D (800x600,56Hz) */
+ 0x6F,0xF0,0x58,0x8A,0x57,0x70,0xA0}}, /* ; (VCLK 36.0MHz) */
+ {{0x7F,0x63,0x83,0x6C,0x1C,0x00,0x06,0x00, /* ; 0E (800x600,60Hz) */
+ 0x72,0xF0,0x58,0x8C,0x57,0x73,0xA0}}, /* ; (VCLK 40.0MHz) */
+ {{0x7D,0x63,0x81,0x6E,0x1D,0x00,0x06,0x00, /* ; 0F (800x600,72Hz) */
+ 0x98,0xF0,0x7C,0x82,0x57,0x99,0x80}}, /* ; (VCLK 50.0MHz) */
+ {{0x7F,0x63,0x83,0x69,0x13,0x00,0x06,0x00, /* ; 10 (800x600,75Hz) */
+ 0x6F,0xF0,0x58,0x8B,0x57,0x70,0xA0}}, /* ; (VCLK 49.5MHz) */
+ {{0x7E,0x63,0x82,0x6B,0x13,0x00,0x06,0x00, /* ; 11 (800x600,85Hz) */
+ 0x75,0xF0,0x58,0x8B,0x57,0x76,0xA0}}, /* ; (VCLK 56.25MHz) */
+ {{0x81,0x63,0x85,0x6D,0x18,0x00,0x06,0x60, /* ; 12 (800x600,100Hz) */
+ 0x7A,0xF0,0x58,0x8B,0x57,0x7B,0xA0}}, /* ; (VCLK 75.8MHz) */
+ {{0x83,0x63,0x87,0x6E,0x19,0x00,0x06,0x60, /* ; 13 (800x600,120Hz) */
+ 0x81,0xF0,0x58,0x8B,0x57,0x82,0xA0}}, /* ; (VCLK 79.411MHz) */
+ {{0x85,0x63,0x89,0x6F,0x1A,0x00,0x06,0x60, /* ; 14 (800x600,160Hz) */
+ 0x91,0xF0,0x58,0x8B,0x57,0x92,0xA0}}, /* ; (VCLK 105.822MHz) */
+ {{0x99,0x7F,0x9D,0x84,0x1A,0x00,0x02,0x00,
+ 0x96,0x1F,0x7F,0x83,0x7F,0x97,0x10}}, /* 0x15 */
+ {{0xA3,0x7F,0x87,0x86,0x97,0x00,0x02,0x00,
+ 0x24,0xF5,0x02,0x88,0xFF,0x25,0x90}}, /* 0x16 */
+ {{0xA1,0x7F,0x85,0x86,0x97,0x00,0x02,0x00,
+ 0x24,0xF5,0x02,0x88,0xFF,0x25,0x90}}, /* 0x17 */
+ {{0x9F,0x7F,0x83,0x85,0x91,0x00,0x02,0x00,
+ 0x1E,0xF5,0x00,0x83,0xFF,0x1F,0x90}}, /* 0x18 */
+ {{0xA7,0x7F,0x8B,0x89,0x95,0x00,0x02,0x00,
+ 0x26,0xF5,0x00,0x83,0xFF,0x27,0x90}}, /* 0x19 */
+ {{0xA9,0x7F,0x8D,0x8C,0x9A,0x00,0x02,0x62,
+ 0x2C,0xF5,0x00,0x83,0xFF,0x2D,0x14}}, /* 0x1a */
+ {{0xAB,0x7F,0x8F,0x8D,0x9B,0x00,0x02,0x62,
+ 0x35,0xF5,0x00,0x83,0xFF,0x36,0x14}}, /* 0x1b */
+ {{0xCF,0x9F,0x93,0xB2,0x01,0x00,0x03,0x00,
+ 0x14,0xBA,0x00,0x83,0xFF,0x15,0x00}}, /* 0x1c */
+ {{0xCE,0x9F,0x92,0xA9,0x17,0x00,0x07,0x00,
+ 0x28,0x5A,0x00,0x83,0xFF,0x29,0x89}}, /* 0x1d */
+ {{0xCE,0x9F,0x92,0xA5,0x17,0x00,0x07,0x00,
+ 0x28,0x5A,0x00,0x83,0xFF,0x29,0x89}}, /* 0x1e */
+ {{0xD3,0x9F,0x97,0xAB,0x1F,0x00,0x07,0x00,
+ 0x2E,0x5A,0x00,0x83,0xFF,0x2F,0x89}}, /* 0x1f */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+ 0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x20 */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+ 0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x21 */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+ 0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x22 */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+ 0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x23 */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+ 0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x24 */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+ 0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x25 */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+ 0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x26 */
+ {{0x40,0xEF,0x84,0x03,0x1D,0x41,0x01,0x00,
+ 0xDA,0x1F,0xA0,0x83,0x9F,0xDB,0x1F}}, /* 0x27 */
+ {{0x43,0xEF,0x87,0x06,0x00,0x41,0x05,0x62,
+ 0xD4,0x1F,0xA0,0x83,0x9F,0xD5,0x9F}}, /* 0x28 */
+ {{0x45,0xEF,0x89,0x07,0x01,0x41,0x05,0x62,
+ 0xD9,0x1F,0xA0,0x83,0x9F,0xDA,0x9F}}, /* 0x29 */
+ {{0x40,0xEF,0x84,0x03,0x1D,0x41,0x01,0x00,
+ 0xDA,0x1F,0xA0,0x83,0x9F,0xDB,0x1F}}, /* 0x2a */
+ {{0x40,0xEF,0x84,0x03,0x1D,0x41,0x01,0x00,
+ 0xDA,0x1F,0xA0,0x83,0x9F,0xDB,0x1F}}, /* 0x2b */
+ {{0x40,0xEF,0x84,0x03,0x1D,0x41,0x01,0x00,
+ 0xDA,0x1F,0xA0,0x83,0x9F,0xDB,0x1F}}, /* 0x2c */
+ {{0x59,0xFF,0x9D,0x17,0x13,0x41,0x05,0x44,
+ 0x33,0xBA,0x00,0x83,0xFF,0x34,0x0F}}, /* 0x2d */
+ {{0x5B,0xFF,0x9F,0x18,0x14,0x41,0x05,0x44,
+ 0x38,0xBA,0x00,0x83,0xFF,0x39,0x0F}}, /* 0x2e */
+ {{0x5B,0xFF,0x9F,0x18,0x14,0x41,0x05,0x44,
+ 0x3D,0xBA,0x00,0x83,0xFF,0x3E,0x0F}}, /* 0x2f */
+ {{0x5D,0xFF,0x81,0x19,0x95,0x41,0x05,0x44,
+ 0x41,0xBA,0x00,0x84,0xFF,0x42,0x0F}}, /* 0x30 */
+ {{0x55,0xFF,0x99,0x0D,0x0C,0x41,0x05,0x00,
+ 0x3E,0xBA,0x00,0x84,0xFF,0x3F,0x0F}}, /* 0x31 */
+ {{0x7F,0x63,0x83,0x6C,0x1C,0x00,0x06,0x00,
+ 0x72,0xBA,0x27,0x8B,0xDF,0x73,0x80}}, /* 0x32 */
+ {{0x7F,0x63,0x83,0x69,0x13,0x00,0x06,0x00,
+ 0x6F,0xBA,0x26,0x89,0xDF,0x6F,0x80}}, /* 0x33 */
+ {{0x7F,0x63,0x82,0x6B,0x13,0x00,0x06,0x00,
+ 0x75,0xBA,0x29,0x8C,0xDF,0x75,0x80}}, /* 0x34 */
+ {{0xA3,0x7F,0x87,0x86,0x97,0x00,0x02,0x00,
+ 0x24,0xF1,0xAF,0x85,0x3F,0x25,0xB0}}, /* 0x35 */
+ {{0x9F,0x7F,0x83,0x85,0x91,0x00,0x02,0x00,
+ 0x1E,0xF1,0xAD,0x81,0x3F,0x1F,0xB0}}, /* 0x36 */
+ {{0xA7,0x7F,0x88,0x89,0x15,0x00,0x02,0x00,
+ 0x26,0xF1,0xB1,0x85,0x3F,0x27,0xB0}}, /* 0x37 */
+ {{0xCE,0x9F,0x92,0xA9,0x17,0x00,0x07,0x00,
+ 0x28,0xC4,0x7A,0x8E,0xCF,0x29,0xA1}}, /* 0x38 */
+ {{0xCE,0x9F,0x92,0xA5,0x17,0x00,0x07,0x00,
+ 0x28,0xD4,0x7A,0x8E,0xCF,0x29,0xA1}}, /* 0x39 */
+ {{0xD3,0x9F,0x97,0xAB,0x1F,0x00,0x07,0x00,
+ 0x2E,0xD4,0x7D,0x81,0xCF,0x2F,0xA1}}, /* 0x3a */
+ {{0xDC,0x9F,0x00,0xAB,0x19,0x00,0x07,0x00,
+ 0xE6,0xEF,0xC0,0xC3,0xBF,0xE7,0x90}}, /* 0x3b */
+ {{0x6B,0x59,0x8F,0x5E,0x8C,0x00,0x05,0x00,
+ 0x0B,0x3E,0xE9,0x8B,0xE7,0x04,0x00}}, /* 0x3c */
+ {{0x7B,0x63,0x9F,0x6A,0x93,0x00,0x05,0x00,
+ 0x6F,0xF0,0x58,0x8A,0x57,0x70,0xA0}}, /* 0x3d */
+ {{0x86,0x6A,0x8a,0x74,0x06,0x00,0x02,0x00,
+ 0x8c,0x15,0x4f,0x83,0xef,0x8d,0x30}}, /* 0x3e */
+ {{0x81,0x6A,0x85,0x70,0x00,0x00,0x02,0x00,
+ 0x0f,0x3e,0xeb,0x8e,0xdf,0x10,0x00}}, /* 0x3f */
+ {{0xCE,0x9F,0x92,0xA9,0x17,0x00,0x07,0x00,
+ 0x20,0xF5,0x03,0x88,0xFF,0x21,0x90}}, /* 0x40 */
+ {{0xE6,0xAE,0x8A,0xBD,0x90,0x00,0x03,0x00,
+ 0x3D,0x10,0x1A,0x8D,0x19,0x3E,0x2F}}, /* 0x41 */
+ {{0xB9,0x8F,0x9D,0x9B,0x8A,0x00,0x06,0x00,
+ 0x7D,0xFF,0x60,0x83,0x5F,0x7E,0x90}}, /* 0x42 */
+ {{0xC3,0x8F,0x87,0x9B,0x0B,0x00,0x07,0x00,
+ 0x82,0xFF,0x60,0x83,0x5F,0x83,0x90}}, /* 0x43 */
+ {{0xAD,0x7F,0x91,0x8E,0x9C,0x00,0x02,0x82,
+ 0x49,0xF5,0x00,0x83,0xFF,0x4A,0x90}}, /* 0x44 */
+ {{0xCD,0x9F,0x91,0xA7,0x19,0x00,0x07,0x60,
+ 0xE6,0xFF,0xC0,0x83,0xBF,0xE7,0x90}}, /* 0x45 */
+ {{0xD3,0x9F,0x97,0xAB,0x1F,0x00,0x07,0x60,
+ 0xF1,0xFF,0xC0,0x83,0xBF,0xF2,0x90}}, /* 0x46 */
+ {{0xD7,0x9F,0x9B,0xAC,0x1E,0x00,0x07,0x00,
+ 0x03,0xDE,0xC0,0x84,0xBF,0x04,0x90}} /* 0x47 */
+};
+
+XGI330_CHTVRegDataStruct XGI_CHTVRegUNTSC[] = {
+ /* Index:000h,001h,002h,004h,003h,005h,006h,007h,008h,015h,01Fh,00Ch,00Dh,00Eh,00Fh,010h */
+ {{ 0x4A,0x77,0xBB,0x94,0x84,0x48,0xFE,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 00 (640x200,640x400) */
+ {{ 0x4A,0x77,0xBB,0x94,0x84,0x48,0xFE,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 01 (640x350) */
+ {{ 0x4A,0x77,0xBB,0x94,0x84,0x48,0xFE,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 02 (720x400) */
+ {{ 0x4A,0x77,0xBB,0x94,0x84,0x48,0xFE,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 03 (720x350) */
+ {{ 0x6A,0x77,0xBB,0x6E,0x84,0x2E,0x02,0x5A,0x04,0x00,0x80,0x20,0x7E,0x80,0x97,0x00 }},/* 04 (640x480) ;;5/6/02 */
+ {{ 0xCF,0x77,0xB7,0xC8,0x84,0x3B,0x02,0x5A,0x04,0x00,0x80,0x19,0x88,0xAE,0xA3,0x00 }},/* 05 (800x600) ;;1/12/02 */
+ {{ 0xEE,0x77,0xBB,0x66,0x87,0x32,0x01,0x5A,0x04,0x00,0x80,0x1B,0xD4,0x2F,0x6F,0x00 }}/* 06 (1024x768) ;;5/6/02 */
+ };
+
+XGI330_CHTVRegDataStruct XGI_CHTVRegONTSC[]= {
+ /* Index:000h,001h,002h,004h,003h,005h,006h,007h,008h,015h,01Fh,00Ch,00Dh,00Eh,00Fh,010h */
+ {{ 0x49,0x77,0xBB,0x7B,0x84,0x34,0x00,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 00 (640x200,640x400) */
+ {{ 0x49,0x77,0xBB,0x7B,0x84,0x34,0x00,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 01 (640x350) */
+ {{ 0x49,0x77,0xBB,0x7B,0x84,0x34,0x00,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 02 (720x400) */
+ {{ 0x49,0x77,0xBB,0x7B,0x84,0x34,0x00,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 03 (720x350) */
+ {{ 0x69,0x77,0xBB,0x6E,0x84,0x1E,0x00,0x5A,0x04,0x00,0x80,0x25,0x1A,0x80,0x26,0x00 }},/* 04 (640x480) ;;5/6/02 */
+ {{ 0xCE,0x77,0xB7,0xB6,0x83,0x2C,0x02,0x5A,0x04,0x00,0x80,0x1C,0x00,0x82,0x97,0x00 }},/* 05 (800x600) ;;5/6/02 */
+ {{ 0xED,0x77,0xBB,0x66,0x8C,0x21,0x02,0x5A,0x04,0x00,0x80,0x1F,0xA0,0x7E,0x73,0x00 }}/* 06 (1024x768) ;;5/6/02 */
+ };
+
+XGI330_CHTVRegDataStruct XGI_CHTVRegUPAL[]= {
+ /* Index:000h,001h,002h,004h,003h,005h,006h,007h,008h,015h,01Fh,00Ch,00Dh,00Eh,00Fh,010h */
+ {{ 0x41,0x7F,0xB7,0x34,0xAD,0x50,0x34,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* ; 00 (640x200,640x400) */
+ {{ 0x41,0x7F,0xB7,0x80,0x85,0x50,0x00,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* ; 01 (640x350) */
+ {{ 0x41,0x7F,0xB7,0x34,0xAD,0x50,0x34,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* ; 02 (720x400) */
+ {{ 0x41,0x7F,0xB7,0x12,0x85,0x50,0x00,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* ; 03 (720x350) */
+ {{ 0x61,0x7F,0xB7,0x99,0x84,0x35,0x04,0x5A,0x05,0x00,0x80,0x26,0x2A,0x55,0x5D,0x00 }},/* ; 04 (640x480) */
+ {{ 0xC3,0x7F,0xB7,0x7A,0x84,0x40,0x02,0x5A,0x05,0x00,0x80,0x1F,0x84,0x3D,0x28,0x00 }},/* ; 05 (800x600) ;;1/12/02 */
+ {{ 0xE5,0x7F,0xB7,0x1D,0xA7,0x3E,0x04,0x5A,0x05,0x00,0x80,0x20,0x3E,0xE4,0x22,0x00 }}/* ; 06 (1024x768) ;;1/12/02 */
+ };
+
+XGI330_CHTVRegDataStruct XGI_CHTVRegOPAL[]={
+ /* Index:000,0x01,0x02,0x04,0x03,0x05,0x06,0x07,0x08,0x15,0x1F,0x0C,0x0D,0x0E,0x0F,0x10h */
+ {{ 0x41,0x7F,0xB7,0x36,0xAD,0x50,0x34,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 00 (640x200,640x400) */
+ {{ 0x41,0x7F,0xB7,0x86,0x85,0x50,0x00,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 01 (640x350) */
+ {{ 0x41,0x7F,0xB7,0x36,0xAD,0x50,0x34,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 02 (720x400) */
+ {{ 0x41,0x7F,0xB7,0x86,0x85,0x50,0x00,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 03 (720x350) */
+ {{ 0x61,0x7F,0xB7,0x99,0x84,0x35,0x04,0x5A,0x05,0x00,0x80,0x26,0x2A,0x55,0x5D,0x00 }},/* 04 (640x480) */
+ {{ 0xC1,0x7F,0xB7,0x4D,0x8C,0x1E,0x31,0x5A,0x05,0x00,0x80,0x26,0x78,0x19,0x34,0x00 }},/* 05 (800x600) ;;1/12/02 */
+ {{ 0xE4,0x7F,0xB7,0x1E,0xAF,0x29,0x37,0x5A,0x05,0x00,0x80,0x25,0x8C,0xB2,0x2A,0x00 }}/* 06 (1024x768) ;;1/12/02 */
+ };
+
+UCHAR XGI_CH7017LV1024x768[]={0x60,0x02,0x00,0x07,0x40,0xED,0xA3,
+ 0xC8,0xC7,0xAC,0xE0,0x02};
+UCHAR XGI_CH7017LV1400x1050[]={0x60,0x03,0x11,0x00,0x40,0xE3,0xAD,
+ 0xDB,0xF6,0xAC,0xE0,0x02};
+
+
+/*add for new UNIVGABIOS*/
+XGI330_LCDDataStruct XGI_StLCD1024x768Data[]=
+{
+ { 62, 25, 800, 546,1344, 806},
+ { 32, 15, 930, 546,1344, 806},
+ { 62, 25, 800, 546,1344, 806}, /* chiawen for dot9 -> dot8 */
+ { 104, 45, 945, 496,1344, 806},
+ { 62, 25, 800, 546,1344, 806},
+ { 31, 18,1008, 624,1344, 806},
+ { 1, 1,1344, 806,1344, 806}
+};
+
+XGI330_LCDDataStruct XGI_ExtLCD1024x768Data[]=
+{
+ { 42, 25,1536, 419,1344, 806}, /* { 12, 5, 896, 512,1344, 806}, // alan 09/12/2003 */
+ { 48, 25,1536, 369,1344, 806}, /* { 12, 5, 896, 510,1344, 806}, // alan 09/12/2003 */
+ { 42, 25,1536, 419,1344, 806}, /* { 32, 15,1008, 505,1344, 806}, // alan 09/12/2003 */
+ { 48, 25,1536, 369,1344, 806}, /* { 32, 15,1008, 514,1344, 806}, // alan 09/12/2003 */
+ { 12, 5, 896, 500,1344, 806},
+ { 42, 25,1024, 625,1344, 806},
+ { 1, 1,1344, 806,1344, 806},
+ { 12, 5, 896, 500,1344, 806},
+ { 42, 25,1024, 625,1344, 806},
+ { 1, 1,1344, 806,1344, 806},
+ { 12, 5, 896, 500,1344, 806},
+ { 42, 25,1024, 625,1344, 806},
+ { 1, 1,1344, 806,1344, 806}
+};
+
+/*XGI330_LCDDataStruct XGI_St2LCD1024x768Data[]=
+{
+ { 62, 25, 800, 546,1344, 806},
+ { 32, 15, 930, 546,1344, 806},
+ { 62, 25, 800, 546,1344, 806},
+ { 104, 45, 945, 496,1344, 806},
+ { 62, 25, 800, 546,1344, 806},
+ { 31, 18,1008, 624,1344, 806},
+ { 1, 1,1344, 806,1344, 806}
+};*/
+
+XGI330_LCDDataStruct XGI_CetLCD1024x768Data[]=
+{
+ { 1,1,1344,806,1344,806 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+ { 1,1,1344,806,1344,806 }, /* 01 (320x350,640x350) */
+ { 1,1,1344,806,1344,806 }, /* 02 (360x400,720x400) */
+ { 1,1,1344,806,1344,806 }, /* 03 (720x350) */
+ { 1,1,1344,806,1344,806 }, /* 04 (640x480x60Hz) */
+ { 1,1,1344,806,1344,806 }, /* 05 (800x600x60Hz) */
+ { 1,1,1344,806,1344,806 } /* 06 (1024x768x60Hz) */
+};
+
+XGI330_LCDDataStruct XGI_StLCD1280x1024Data[]=
+{
+ { 22, 5, 800, 510,1650,1088},
+ { 22, 5, 800, 510,1650,1088},
+ { 176, 45, 900, 510,1650,1088},
+ { 176, 45, 900, 510,1650,1088},
+ { 22, 5, 800, 510,1650,1088},
+ { 13, 5,1024, 675,1560,1152},
+ { 16, 9,1266, 804,1688,1072},
+ { 1, 1,1688,1066,1688,1066}
+};
+
+XGI330_LCDDataStruct XGI_ExtLCD1280x1024Data[]=
+{
+ { 211, 60,1024, 501,1688,1066},
+ { 211, 60,1024, 508,1688,1066},
+ { 211, 60,1024, 501,1688,1066},
+ { 211, 60,1024, 508,1688,1066},
+ { 211, 60,1024, 500,1688,1066},
+ { 211, 75,1024, 625,1688,1066},
+ { 211, 120,1280, 798,1688,1066},
+ { 1, 1,1688,1066,1688,1066}
+};
+
+XGI330_LCDDataStruct XGI_St2LCD1280x1024Data[]=
+{
+ { 22, 5, 800, 510,1650,1088},
+ { 22, 5, 800, 510,1650,1088},
+ { 176, 45, 900, 510,1650,1088},
+ { 176, 45, 900, 510,1650,1088},
+ { 22, 5, 800, 510,1650,1088},
+ { 13, 5,1024, 675,1560,1152},
+ { 16, 9,1266, 804,1688,1072},
+ { 1, 1,1688,1066,1688,1066}
+};
+
+XGI330_LCDDataStruct XGI_CetLCD1280x1024Data[]=
+{
+ { 1,1,1688,1066,1688,1066 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 1,1,1688,1066,1688,1066 }, /* 01 (320x350,640x350) */
+ { 1,1,1688,1066,1688,1066 }, /* 02 (360x400,720x400) */
+ { 1,1,1688,1066,1688,1066 }, /* 03 (720x350) */
+ { 1,1,1688,1066,1688,1066 }, /* 04 (640x480x60Hz) */
+ { 1,1,1688,1066,1688,1066 }, /* 05 (800x600x60Hz) */
+ { 1,1,1688,1066,1688,1066 }, /* 06 (1024x768x60Hz) */
+ { 1,1,1688,1066,1688,1066 }, /* 07 (1280x1024x60Hz) */
+ { 1,1,1688,1066,1688,1066 } /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataStruct XGI_StLCD1400x1050Data[]=
+{
+ { 211,100,2100,408,1688,1066 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 211,64,1536,358,1688,1066 }, /* 01 (320x350,640x350) */
+ { 211,100,2100,408,1688,1066 }, /* 02 (360x400,720x400) */
+ { 211,64,1536,358,1688,1066 }, /* 03 (720x350) */
+ { 211,48,840,488,1688,1066 }, /* 04 (640x480x60Hz) */
+ { 211,72,1008,609,1688,1066 }, /* 05 (800x600x60Hz) */
+ { 211,128,1400,776,1688,1066 }, /* 06 (1024x768x60Hz) */
+ { 1,1,1688,1066,1688,1066 }, /* 07 (1280x1024x60Hz w/o Scaling) */
+ { 1,1,1688,1066,1688,1066 } /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataStruct XGI_ExtLCD1400x1050Data[]=
+{
+ { 211,100,2100,408,1688,1066 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 211,64,1536,358,1688,1066 }, /* 01 (320x350,640x350) */
+ { 211,100,2100,408,1688,1066 }, /* 02 (360x400,720x400) */
+ { 211,64,1536,358,1688,1066 }, /* 03 (720x350) */
+ { 211,48,840,488,1688,1066 }, /* 04 (640x480x60Hz) */
+ { 211,72,1008,609,1688,1066 }, /* 05 (800x600x60Hz) */
+ { 211,128,1400,776,1688,1066 }, /* 06 (1024x768x60Hz) */
+ { 1,1,1688,1066,1688,1066 }, /* 07 (1280x1024x60Hz w/o Scaling) */
+ { 1,1,1688,1066,1688,1066 } /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataStruct XGI_ExtLCD1600x1200Data[]=
+{
+ { 4,1,1620,420,2160,1250 }, /* { 3,1,2160,425,2160,1250 }, // 00 (320x200,320x400,640x200,640x400) // alan 10/14/2003 */
+ { 27,7,1920,375,2160,1250 }, /* 01 (320x350,640x350) */
+ { 4,1,1620,420,2160,1250 }, /* { 3,1,2160,425,2160,1250 }, // 02 (360x400,720x400) // alan 10/14/2003 */
+ { 27,7,1920,375,2160,1250 }, /* 03 (720x350) */
+ { 27,4,800,500,2160,1250 }, /* 04 (640x480x60Hz) */
+ { 4,1,1080,625,2160,1250 }, /* 05 (800x600x60Hz) */
+ { 5,2,1350,800,2160,1250 }, /* 06 (1024x768x60Hz) */
+ { 27,16,1500,1064,2160,1250 }, /* 07 (1280x1024x60Hz) */
+ { 9,7,1920,1106,2160,1250 }, /* 08 (1400x1050x60Hz) */
+ { 1,1,2160,1250,2160,1250 } /* 09 (1600x1200x60Hz) ;302lv */
+};
+
+XGI330_LCDDataStruct XGI_StLCD1600x1200Data[]=
+{
+ { 27,4,800,500,2160,1250 },/* 00 (320x200,320x400,640x200,640x400) */
+ { 27,4,800,500,2160,1250 },/* 01 (320x350,640x350) */
+ { 27,4,800,500,2160,1250 },/* 02 (360x400,720x400) */
+ { 27,4,800,500,2160,1250 },/* 03 (720x350) */
+ { 27,4,800,500,2160,1250 },/* 04 (320x240,640x480) */
+ { 4,1,1080,625,2160,1250 },/* 05 (400x300,800x600) */
+ { 5,2,1350,800,2160,1250 },/* 06 (512x384,1024x768) */
+ { 135,88,1600,1100,2160,1250 },/* 07 (1280x1024) */
+ { 1,1,1800,1500,2160,1250 },/* 08 (1400x1050) */
+ { 1,1,2160,1250,2160,1250 } /* 09 (1600x1200) */
+};
+
+XGI330_LCDDataStruct XGI_CetLCD1400x1050Data[]=
+{
+ { 1,1,1688,1066,1688,1066 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 1,1,1688,1066,1688,1066 }, /* 01 (320x350,640x350) */
+ { 1,1,1688,1066,1688,1066 }, /* 02 (360x400,720x400) */
+ { 1,1,1688,1066,1688,1066 }, /* 03 (720x350) */
+ { 1,1,1688,1066,1688,1066 }, /* 04 (640x480x60Hz) */
+ { 1,1,1688,1066,1688,1066 }, /* 05 (800x600x60Hz) */
+ { 1,1,1688,1066,1688,1066 }, /* 06 (1024x768x60Hz) */
+ { 1,1,1688,1066,1688,1066 }, /* 07 (1280x1024x60Hz) */
+ { 1,1,1688,1066,1688,1066 } /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataStruct XGI_NoScalingData[]=
+{
+ { 1, 1, 800, 449, 800, 449},
+ { 1, 1, 800, 449, 800, 449},
+ { 1, 1, 900, 449, 900, 449},
+ { 1, 1, 900, 449, 900, 449},
+ { 1, 1, 800, 525, 800, 525},
+ { 1, 1,1056, 628,1056, 628},
+ { 1, 1,1344, 806,1344, 806},
+ { 1, 1,1688,1066,1688,1066}
+};
+
+XGI330_LCDDataStruct XGI_ExtLCD1024x768x75Data[]=
+{
+ {42,25,1536,419,1344,806 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {48,25,1536,369,1344,806 }, /* ; 01 (320x350,640x350) */
+ {42,25,1536,419,1344,806 }, /* ; 02 (360x400,720x400) */
+ {48,25,1536,369,1344,806 }, /* ; 03 (720x350) */
+ {8,5,1312,500,1312,800 }, /* ; 04 (640x480x75Hz) */
+ {41,25,1024,625,1312,800 }, /* ; 05 (800x600x75Hz) */
+ {1,1,1312,800,1312,800 } /* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LCDDataStruct XGI_StLCD1024x768x75Data[]=
+{
+ {42,25,1536,419,1344,806 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {48,25,1536,369,1344,806 }, /* ; 01 (320x350,640x350) */
+ {42,25,1536,419,1344,806 }, /* ; 02 (360x400,720x400) */
+ {48,25,1536,369,1344,806 }, /* ; 03 (720x350) */
+ {8,5,1312,500,1312,800 }, /* ; 04 (640x480x75Hz) */
+ {41,25,1024,625,1312,800 }, /* ; 05 (800x600x75Hz) */
+ {1,1,1312,800,1312,800 } /* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LCDDataStruct XGI_CetLCD1024x768x75Data[]=
+{
+ {1,1,1312,800,1312,800}, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {1,1,1312,800,1312,800}, /* ; 01 (320x350,640x350) */
+ {1,1,1312,800,1312,800}, /* ; 02 (360x400,720x400) */
+ {1,1,1312,800,1312,800}, /* ; 03 (720x350) */
+ {1,1,1312,800,1312,800}, /* ; 04 (640x480x75Hz) */
+ {1,1,1312,800,1312,800}, /* ; 05 (800x600x75Hz) */
+ {1,1,1312,800,1312,800} /* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LCDDataStruct XGI_ExtLCD1280x1024x75Data[]=
+{
+ {211,60,1024,501,1688,1066 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {211,60,1024,508,1688,1066 }, /* ; 01 (320x350,640x350) */
+ {211,60,1024,501,1688,1066 }, /* ; 02 (360x400,720x400) */
+ {211,60,1024,508,1688,1066 }, /* ; 03 (720x350) */
+ {211,45,768,498,1688,1066 }, /* ; 04 (640x480x75Hz) */
+ {211,75,1024,625,1688,1066 }, /* ; 05 (800x600x75Hz) */
+ {211,120,1280,798,1688,1066 }, /* ; 06 (1024x768x75Hz) */
+ {1,1,1688,1066,1688,1066 } /* ; 07 (1280x1024x75Hz) */
+};
+
+XGI330_LCDDataStruct XGI_StLCD1280x1024x75Data[]=
+{
+ {211,60,1024,501,1688,1066 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {211,60,1024,508,1688,1066 }, /* ; 01 (320x350,640x350) */
+ {211,60,1024,501,1688,1066 }, /* ; 02 (360x400,720x400) */
+ {211,60,1024,508,1688,1066 }, /* ; 03 (720x350) */
+ {211,45,768,498,1688,1066 }, /* ; 04 (640x480x75Hz) */
+ {211,75,1024,625,1688,1066 }, /* ; 05 (800x600x75Hz) */
+ {211,120,1280,798,1688,1066}, /* ; 06 (1024x768x75Hz) */
+ {1,1,1688,1066,1688,1066 } /* ; 07 (1280x1024x75Hz) */
+};
+
+XGI330_LCDDataStruct XGI_CetLCD1280x1024x75Data[]=
+{
+ {1,1,1688,1066,1688,1066}, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {1,1,1688,1066,1688,1066}, /* ; 01 (320x350,640x350) */
+ {1,1,1688,1066,1688,1066}, /* ; 02 (360x400,720x400) */
+ {1,1,1688,1066,1688,1066}, /* ; 03 (720x350) */
+ {1,1,1688,1066,1688,1066}, /* ; 04 (640x480x75Hz) */
+ {1,1,1688,1066,1688,1066}, /* ; 05 (800x600x75Hz) */
+ {1,1,1688,1066,1688,1066}, /* ; 06 (1024x768x75Hz) */
+ {1,1,1688,1066,1688,1066} /* ; 07 (1280x1024x75Hz) */
+};
+
+XGI330_LCDDataStruct XGI_NoScalingDatax75[]=
+{
+ {1,1,800,449,800,449 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {1,1,800,449,800,449 }, /* ; 01 (320x350,640x350) */
+ {1,1,900,449,900,449 }, /* ; 02 (360x400,720x400) */
+ {1,1,900,449,900,449 }, /* ; 03 (720x350) */
+ {1,1,840,500,840,500 }, /* ; 04 (640x480x75Hz) */
+ {1,1,1056,625,1056,625 }, /* ; 05 (800x600x75Hz) */
+ {1,1,1312,800,1312,800 }, /* ; 06 (1024x768x75Hz) */
+ {1,1,1688,1066,1688,1066}, /* ; 07 (1280x1024x75Hz) */
+ {1,1,1688,1066,1688,1066}, /* ; 08 (1400x1050x75Hz) ;;[ycchen] 12/19/02 */
+ {1,1,2160,1250,2160,1250}, /* ; 09 (1600x1200x75Hz) */
+ {1,1,1688,806,1688,806 } /* ; 0A (1280x768x75Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_ExtLCDDes1024x768Data[]=
+{
+ { 9,1057,0, 771 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+ { 9,1057,0, 771 }, /* ; 01 (320x350,640x350) */
+ { 9,1057,0, 771 }, /* ; 02 (360x400,720x400) */
+ { 9,1057,0, 771 }, /* ; 03 (720x350) */
+ { 9,1057,0, 771 }, /* ; 04 (640x480x60Hz) */
+ { 9,1057,0, 771 }, /* ; 05 (800x600x60Hz) */
+ { 9,1057,805, 770 } /* ; 06 (1024x768x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_StLCDDes1024x768Data[]=
+{
+ { 9,1057,737,703 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+ { 9,1057,686,651 }, /* ; 01 (320x350,640x350) */
+ { 9,1057,737,703 }, /* ; 02 (360x400,720x400) */
+ { 9,1057,686,651 }, /* ; 03 (720x350) */
+ { 9,1057,776,741 }, /* ; 04 (640x480x60Hz) */
+ { 9,1057, 0 ,771 }, /* ; 05 (800x600x60Hz) */
+ { 9,1057,805,770 } /* ; 06 (1024x768x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_CetLCDDes1024x768Data[]=
+{
+ { 1152,856,622,587 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+ { 1152,856,597,562 }, /* ; 01 (320x350,640x350) */
+ { 1152,856,622,587 }, /* ; 02 (360x400,720x400) */
+ { 1152,856,597,562 }, /* ; 03 (720x350) */
+ { 1152,856,662,627 }, /* ; 04 (640x480x60Hz) */
+ { 1232,936,722,687 }, /* ; 05 (800x600x60Hz) */
+ { 0,1048,805,770 } /* ; 06 (1024x768x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_ExtLCDDLDes1280x1024Data[]=
+{
+ { 18,1346,981,940 },/* 00 (320x200,320x400,640x200,640x400) */
+ { 18,1346,926,865 },/* 01 (320x350,640x350) */
+ { 18,1346,981,940 },/* 02 (360x400,720x400) */
+ { 18,1346,926,865 },/* 03 (720x350) */
+ { 18,1346,0,1025 },/* 04 (640x480x60Hz) */
+ { 18,1346,0,1025 },/* 05 (800x600x60Hz) */
+ { 18,1346,1065,1024 },/* 06 (1024x768x60Hz) */
+ { 18,1346,1065,1024 }/* 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_StLCDDLDes1280x1024Data[]=
+{
+ { 18,1346,970,907 },/* 00 (320x200,320x400,640x200,640x400) */
+ { 18,1346,917,854 },/* 01 (320x350,640x350) */
+ { 18,1346,970,907 },/* 02 (360x400,720x400) */
+ { 18,1346,917,854 },/* 03 (720x350) */
+ { 18,1346,0,1025 },/* 04 (640x480x60Hz) */
+ { 18,1346,0,1025 },/* 05 (800x600x60Hz) */
+ { 18,1346,1065,1024 },/* 06 (1024x768x60Hz) */
+ { 18,1346,1065,1024 }/* 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_CetLCDDLDes1280x1024Data[]=
+{
+ { 1368,1008,752,711 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 1368,1008,729,688 }, /* 01 (320x350,640x350) */
+ { 1368,1008,752,711 }, /* 02 (360x400,720x400) */
+ { 1368,1008,729,688 }, /* 03 (720x350) */
+ { 1368,1008,794,753 }, /* 04 (640x480x60Hz) */
+ { 1448,1068,854,813 }, /* 05 (800x600x60Hz) */
+ { 1560,1200,938,897 }, /* 06 (1024x768x60Hz) */
+ { 18,1346,1065,1024 } /* 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_ExtLCDDes1280x1024Data[]=
+{
+ { 9,1337,981,940 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+ { 9,1337,926,884 }, /* ; 01 (320x350,640x350) alan, 2003/09/30 */
+ { 9,1337,981,940 }, /* ; 02 (360x400,720x400) */
+ { 9,1337,926,884 }, /* ; 03 (720x350) alan, 2003/09/30 */
+ { 9,1337,0,1025 }, /* ; 04 (640x480x60Hz) */
+ { 9,1337,0,1025 }, /* ; 05 (800x600x60Hz) */
+ { 9,1337,1065,1024 }, /* ; 06 (1024x768x60Hz) */
+ { 9,1337,1065,1024 } /* ; 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_StLCDDes1280x1024Data[]=
+{
+ { 9,1337,970,907 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+ { 9,1337,917,854 }, /* ; 01 (320x350,640x350) */
+ { 9,1337,970,907 }, /* ; 02 (360x400,720x400) */
+ { 9,1337,917,854 }, /* ; 03 (720x350) */
+ { 9,1337,0,1025 }, /* ; 04 (640x480x60Hz) */
+ { 9,1337,0,1025 }, /* ; 05 (800x600x60Hz) */
+ { 9,1337,1065,1024 }, /* ; 06 (1024x768x60Hz) */
+ { 9,1337,1065,1024 } /* ; 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_CetLCDDes1280x1024Data[]=
+{
+ { 1368,1008,752,711 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 1368,1008,729,688 }, /* 01 (320x350,640x350) */
+ { 1368,1008,752,711 }, /* 02 (360x400,720x400) */
+ { 1368,1008,729,688 }, /* 03 (720x350) */
+ { 1368,1008,794,753 }, /* 04 (640x480x60Hz) */
+ { 1448,1068,854,813 }, /* 05 (800x600x60Hz) */
+ { 1560,1200,938,897 }, /* 06 (1024x768x60Hz) */
+ { 9,1337,1065,1024 } /* 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_StLCDDLDes1400x1050Data[]=
+{
+ { 18,1464,0,1051 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 18,1464,0,1051 }, /* 01 (320x350,640x350) */
+ { 18,1464,0,1051 }, /* 02 (360x400,720x400) */
+ { 18,1464,0,1051 }, /* 03 (720x350) */
+ { 18,1464,0,1051 }, /* 04 (640x480x60Hz) */
+ { 18,1464,0,1051 }, /* 05 (800x600x60Hz) */
+ { 18,1464,0,1051 }, /* 06 (1024x768x60Hz) */
+ { 1646,1406,1053,1038 }, /* 07 (1280x1024x60Hz) */
+ { 18,1464,0,1051 } /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_ExtLCDDLDes1400x1050Data[]=
+{
+ { 18,1464,0,1051 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 18,1464,0,1051 }, /* 01 (320x350,640x350) */
+ { 18,1464,0,1051 }, /* 02 (360x400,720x400) */
+ { 18,1464,0,1051 }, /* 03 (720x350) */
+ { 18,1464,0,1051 }, /* 04 (640x480x60Hz) */
+ { 18,1464,0,1051 }, /* 05 (800x600x60Hz) */
+ { 18,1464,0,1051 }, /* 06 (1024x768x60Hz) */
+ { 1646,1406,1053,1038 }, /* 07 (1280x1024x60Hz) */
+ { 18,1464,0,1051 } /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_StLCDDes1400x1050Data[]=
+{
+ { 9,1455,0,1051 },/* 00 (320x200,320x400,640x200,640x400) */
+ { 9,1455,0,1051 },/* 01 (320x350,640x350) */
+ { 9,1455,0,1051 },/* 02 (360x400,720x400) */
+ { 9,1455,0,1051 },/* 03 (720x350) */
+ { 9,1455,0,1051 },/* 04 (640x480x60Hz) */
+ { 9,1455,0,1051 },/* 05 (800x600x60Hz) */
+ { 9,1455,0,1051 },/* 06 (1024x768x60Hz) */
+ { 1637,1397,1053,1038 },/* 07 (1280x1024x60Hz) */
+ { 9,1455,0,1051 } /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_ExtLCDDes1400x1050Data[]=
+{
+ { 9,1455,0,1051 },/* 00 (320x200,320x400,640x200,640x400) */
+ { 9,1455,0,1051 },/* 01 (320x350,640x350) */
+ { 9,1455,0,1051 },/* 02 (360x400,720x400) */
+ { 9,1455,0,1051 },/* 03 (720x350) */
+ { 9,1455,0,1051 },/* 04 (640x480x60Hz) */
+ { 9,1455,0,1051 },/* 05 (800x600x60Hz) */
+ { 9,1455,0,1051 },/* 06 (1024x768x60Hz) */
+ { 1637,1397,1053,1038 },/* 07 (1280x1024x60Hz) */
+ { 9,1455,0,1051 } /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_CetLCDDes1400x1050Data[]=
+{
+ { 1308,1068,781,766 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 1308,1068,781,766 }, /* 01 (320x350,640x350) */
+ { 1308,1068,781,766 }, /* 02 (360x400,720x400) */
+ { 1308,1068,781,766 }, /* 03 (720x350) */
+ { 1308,1068,781,766 }, /* 04 (640x480x60Hz) */
+ { 1388,1148,841,826 }, /* 05 (800x600x60Hz) */
+ { 1490,1250,925,910 }, /* 06 (1024x768x60Hz) */
+ { 1646,1406,1053,1038 }, /* 07 (1280x1024x60Hz) */
+ { 18,1464,0,1051 } /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_CetLCDDes1400x1050Data2[]=
+{
+ { 0,1448,0,1051 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 0,1448,0,1051 }, /* 01 (320x350,640x350) */
+ { 0,1448,0,1051 }, /* 02 (360x400,720x400) */
+ { 0,1448,0,1051 }, /* 03 (720x350) */
+ { 0,1448,0,1051 } /* 04 (640x480x60Hz) */
+};
+
+
+
+XGI330_LCDDataDesStruct XGI_ExtLCDDLDes1600x1200Data[]=
+{
+ { 18,1682,0,1201 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 18,1682,0,1201 }, /* 01 (320x350,640x350) */
+ { 18,1682,0,1201 }, /* 02 (360x400,720x400) */
+ { 18,1682,0,1201 }, /* 03 (720x350) */
+ { 18,1682,0,1201 }, /* 04 (640x480x60Hz) */
+ { 18,1682,0,1201 }, /* 05 (800x600x60Hz) */
+ { 18,1682,0,1201 }, /* 06 (1024x768x60Hz) */
+ { 18,1682,0,1201 }, /* 07 (1280x1024x60Hz) */
+ { 18,1682,0,1201 }, /* 08 (1400x1050x60Hz) */
+ { 18,1682,0,1201 } /* 09 (1600x1200x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_StLCDDLDes1600x1200Data[]=
+{
+ { 18,1682,1150,1101 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 18,1682,1083,1034 }, /* 01 (320x350,640x350) */
+ { 18,1682,1150,1101 }, /* 02 (360x400,720x400) */
+ { 18,1682,1083,1034 }, /* 03 (720x350) */
+ { 18,1682,0,1201 }, /* 04 (640x480x60Hz) */
+ { 18,1682,0,1201 }, /* 05 (800x600x60Hz) */
+ { 18,1682,0,1201 }, /* 06 (1024x768x60Hz) */
+ { 18,1682,1232,1183 }, /* 07 (1280x1024x60Hz) */
+ { 18,1682,0,1201 }, /* 08 (1400x1050x60Hz) */
+ { 18,1682,0,1201 } /* 09 (1600x1200x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_ExtLCDDes1600x1200Data[]=
+{
+ { 9,1673,0,1201 },/* 00 (320x200,320x400,640x200,640x400) */
+ { 9,1673,0,1201 },/* 01 (320x350,640x350) */
+ { 9,1673,0,1201 },/* 02 (360x400,720x400) */
+ { 9,1673,0,1201 },/* 03 (720x350) */
+ { 9,1673,0,1201 },/* 04 (640x480x60Hz) */
+ { 9,1673,0,1201 },/* 05 (800x600x60Hz) */
+ { 9,1673,0,1201 },/* 06 (1024x768x60Hz) */
+ { 9,1673,0,1201 },/* 07 (1280x1024x60Hz) */
+ { 9,1673,0,1201 },/* 08 (1400x1050x60Hz) */
+ { 9,1673,0,1201 } /* 09 (1600x1200x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_StLCDDes1600x1200Data[]=
+{
+ { 9,1673,1150,1101 },/* 00 (320x200,320x400,640x200,640x400) */
+ { 9,1673,1083,1034 },/* 01 (320x350,640x350) */
+ { 9,1673,1150,1101 },/* 02 (360x400,720x400) */
+ { 9,1673,1083,1034 },/* 03 (720x350) */
+ { 9,1673,0,1201 },/* 04 (640x480x60Hz) */
+ { 9,1673,0,1201 },/* 05 (800x600x60Hz) */
+ { 9,1673,0,1201 },/* 06 (1024x768x60Hz) */
+ { 9,1673,1232,1183 },/* 07 (1280x1024x60Hz) */
+ { 9,1673,0,1201 },/* 08 (1400x1050x60Hz) */
+ { 9,1673,0,1201 } /* 09 (1600x1200x60Hz) */
+};
+
+XGI330_LCDDataDesStruct2 XGI_NoScalingDesData[]=
+{
+ { 9,657,448,405,96,2 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 9,657,448,355,96,2 }, /* 01 (320x350,640x350) */
+ { 9,657,448,405,96,2 }, /* 02 (360x400,720x400) */
+ { 9,657,448,355,96,2 }, /* 03 (720x350) */
+ { 9,657,1,483,96,2 }, /* 04 (640x480x60Hz) */
+ { 9,849,627,600,128,4 }, /* 05 (800x600x60Hz) */
+ { 9,1057,805,770,0136,6 }, /* 06 (1024x768x60Hz) */
+ { 9,1337,0,1025,112,3 }, /* 07 (1280x1024x60Hz) */
+ { 9,1457,0,1051,112,3 }, /* 08 (1400x1050x60Hz) }, //;[ycchen] 12/19/02 */
+ { 9,1673,0,1201,192,3 }, /* 09 (1600x1200x60Hz) */
+ { 9,1337,0,771,112,6 } /* 0A (1280x768x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_ExtLCDDes1024x768x75Data[]= /* ;;1024x768x75Hz */
+{
+ {9,1049,0,769}, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {9,1049,0,769}, /* ; 01 (320x350,640x350) */
+ {9,1049,0,769}, /* ; 02 (360x400,720x400) */
+ {9,1049,0,769}, /* ; 03 (720x350) */
+ {9,1049,0,769}, /* ; 04 (640x480x75Hz) */
+ {9,1049,0,769}, /* ; 05 (800x600x75Hz) */
+ {9,1049,0,769} /* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_StLCDDes1024x768x75Data[]=
+{
+ {9,1049,0,769}, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {9,1049,0,769}, /* ; 01 (320x350,640x350) */
+ {9,1049,0,769}, /* ; 02 (360x400,720x400) */
+ {9,1049,0,769}, /* ; 03 (720x350) */
+ {9,1049,0,769}, /* ; 04 (640x480x75Hz) */
+ {9,1049,0,769}, /* ; 05 (800x600x75Hz) */
+ {9,1049,0,769} /* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_CetLCDDes1024x768x75Data[]= /* ;;1024x768x75Hz */
+{
+ {1152,856,622,587}, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {1152,856,597,562}, /* ; 01 (320x350,640x350) */
+ {1192,896,622,587}, /* ; 02 (360x400,720x400) */
+ {1192,896,597,562}, /* ; 03 (720x350) */
+ {1129,857,656,625}, /* ; 04 (640x480x75Hz) */
+ {1209,937,716,685}, /* ; 05 (800x600x75Hz) */
+ {9,1049,0,769} /* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_ExtLCDDLDes1280x1024x75Data[]= /* ;;1280x1024x75Hz */
+{
+ {18,1314,0,1025 },/* ; 00 (320x200,320x400,640x200,640x400) */
+ {18,1314,0,1025 },/* ; 01 (320x350,640x350) */
+ {18,1314,0,1025 },/* ; 02 (360x400,720x400) */
+ {18,1314,0,1025 },/* ; 03 (720x350) */
+ {18,1314,0,1025 },/* ; 04 (640x480x60Hz) */
+ {18,1314,0,1025 },/* ; 05 (800x600x60Hz) */
+ {18,1314,0,1025 },/* ; 06 (1024x768x60Hz) */
+ {18,1314,0,1025 }/* ; 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_StLCDDLDes1280x1024x75Data[]=
+{
+ {18,1314,0,1025 },/* ; 00 (320x200,320x400,640x200,640x400) */
+ {18,1314,0,1025 },/* ; 01 (320x350,640x350) */
+ {18,1314,0,1025 },/* ; 02 (360x400,720x400) */
+ {18,1314,0,1025 },/* ; 03 (720x350) */
+ {18,1314,0,1025 },/* ; 04 (640x480x60Hz) */
+ {18,1314,0,1025 },/* ; 05 (800x600x60Hz) */
+ {18,1314,0,1025 },/* ; 06 (1024x768x60Hz) */
+ {18,1314,0,1025 }/* ; 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_CetLCDDLDes1280x1024x75Data[]= /* 1280x1024x75Hz */
+{
+ {1368,1008,752,711}, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {1368,1008,729,688}, /* ; 01 (320x350,640x350) */
+ {1408,1048,752,711}, /* ; 02 (360x400,720x400) */
+ {1408,1048,729,688}, /* ; 03 (720x350) */
+ {1377,985,794,753}, /* ; 04 (640x480x75Hz) */
+ {1457,1065,854,813}, /* ; 05 (800x600x75Hz) */
+ {1569,1177,938,897}, /* ; 06 (1024x768x75Hz) */
+ {18,1314,0,1025} /* ; 07 (1280x1024x75Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_ExtLCDDes1280x1024x75Data[]= /* ;;1280x1024x75Hz */
+{
+ {9,1305,0,1025},/* ; 00 (320x200,320x400,640x200,640x400) */
+ {9,1305,0,1025},/* ; 01 (320x350,640x350) */
+ {9,1305,0,1025},/* ; 02 (360x400,720x400) */
+ {9,1305,0,1025},/* ; 03 (720x350) */
+ {9,1305,0,1025},/* ; 04 (640x480x60Hz) */
+ {9,1305,0,1025},/* ; 05 (800x600x60Hz) */
+ {9,1305,0,1025},/* ; 06 (1024x768x60Hz) */
+ {9,1305,0,1025} /* ; 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_StLCDDes1280x1024x75Data[]=
+{
+ {9,1305,0,1025},/* ; 00 (320x200,320x400,640x200,640x400) */
+ {9,1305,0,1025},/* ; 01 (320x350,640x350) */
+ {9,1305,0,1025},/* ; 02 (360x400,720x400) */
+ {9,1305,0,1025},/* ; 03 (720x350) */
+ {9,1305,0,1025},/* ; 04 (640x480x60Hz) */
+ {9,1305,0,1025},/* ; 05 (800x600x60Hz) */
+ {9,1305,0,1025},/* ; 06 (1024x768x60Hz) */
+ {9,1305,0,1025} /* ; 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_CetLCDDes1280x1024x75Data[]= /* 1280x1024x75Hz */
+{
+ {1368,1008,752,711}, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {1368,1008,729,688}, /* ; 01 (320x350,640x350) */
+ {1408,1048,752,711}, /* ; 02 (360x400,720x400) */
+ {1408,1048,729,688}, /* ; 03 (720x350) */
+ {1377,985,794,753}, /* ; 04 (640x480x75Hz) */
+ {1457,1065,854,813}, /* ; 05 (800x600x75Hz) */
+ {1569,1177,938,897}, /* ; 06 (1024x768x75Hz) */
+ {9,1305,0,1025} /* ; 07 (1280x1024x75Hz) */
+};
+
+XGI330_LCDDataDesStruct2 XGI_NoScalingDesDatax75[]= /* Scaling LCD 75Hz */
+{
+ {9,657,448,405,96,2}, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {9,657,448,355,96,2}, /* ; 01 (320x350,640x350) */
+ {9,738,448,405,108,2}, /* ; 02 (360x400,720x400) */
+ {9,738,448,355,108,2}, /* ; 03 (720x350) */
+ {9,665,0,481,64,3}, /* ; 04 (640x480x75Hz) */
+ {9,825,0,601,80,3}, /* ; 05 (800x600x75Hz) */
+ {9,1049,0,769,96,3}, /* ; 06 (1024x768x75Hz) */
+ {9,1305,0,1025,144,3}, /* ; 07 (1280x1024x75Hz) */
+ {9,1457,0,1051,112,3}, /* ; 08 (1400x1050x60Hz) ;;[ycchen] 12/19/02 */
+ {9,1673,0,1201,192,3}, /* ; 09 (1600x1200x75Hz) */
+ {9,1337,0,771,112,6} /* ; 0A (1280x768x60Hz) */
+};
+
+XGI330_TVDataStruct XGI_StPALData[]=
+{
+ { 1, 1, 864, 525,1270, 400, 100, 0, 760},
+ { 1, 1, 864, 525,1270, 350, 100, 0, 760},
+ { 1, 1, 864, 525,1270, 400, 0, 0, 720},
+ { 1, 1, 864, 525,1270, 350, 0, 0, 720},
+ { 1, 1, 864, 525,1270, 480, 50, 0, 760},
+ { 1, 1, 864, 525,1270, 600, 50, 0, 0}
+};
+
+XGI330_TVDataStruct XGI_ExtPALData[]=
+{
+ { 2, 1,1080, 463,1270, 500, 50, 0, 50},
+ { 15, 7,1152, 413,1270, 500, 50, 0, 50},
+ { 2, 1,1080, 463,1270, 500, 50, 0, 50},
+ { 15, 7,1152, 413,1270, 500, 50, 0, 50},
+ { 2, 1, 900, 543,1270, 500, 0, 0, 50},
+ { 4, 3,1080, 663,1270, 500, 438, 0, 438},
+ { 1, 1,1125, 831,1270, 500, 686, 0, 686}, /*301b*/
+ { 3, 2,1080, 619,1270, 540, 438, 0, 438}
+};
+
+XGI330_TVDataStruct XGI_StNTSCData[]=
+{
+ { 1, 1, 858, 525,1270, 400, 50, 0, 760},
+ { 1, 1, 858, 525,1270, 350, 50, 0, 640},
+ { 1, 1, 858, 525,1270, 400, 0, 0, 720},
+ { 1, 1, 858, 525,1270, 350, 0, 0, 720},
+ { 1, 1, 858, 525,1270, 480, 0, 0, 760}
+};
+
+XGI330_TVDataStruct XGI_ExtNTSCData[]=
+{
+ { 9, 5, 1001, 453,1270, 420, 171, 0, 171},
+ { 12, 5, 858, 403,1270, 420, 171, 0, 171},
+ { 9, 5, 1001, 453,1270, 420, 171, 0, 171},
+ { 12, 5, 858, 403,1270, 420, 171, 0, 171},
+ { 143, 80, 836, 523,1270, 420, 224, 0, 0},
+ { 143, 120,1008, 643,1270, 420, 0, 1, 0},
+ { 1, 1,1120, 821,1516, 420, 0, 1, 0}, /*301b*/
+ { 2, 1, 858, 503,1584, 480, 0, 1, 0},
+ { 3, 2,1001, 533,1270, 420, 0, 0, 0}
+};
+
+XGI330_TVDataStruct XGI_St1HiTVData[]=
+{
+ { 1,1,892,563,690,800,0,0,0 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 1,1,892,563,690,700,0,0,0 }, /* 01 (320x350,640x350) */
+ { 1,1,1000,563,785,800,0,0,0 }, /* 02 (360x400,720x400) */
+ { 1,1,1000,563,785,700,0,0,0 }, /* 03 (720x350) */
+ { 1,1,892,563,690,960,0,0,0 }, /* 04 (320x240,640x480) */
+ { 8,5,1050,683,1648,960,0x150,1,0 } /* 05 (400x300,800x600) */
+};
+
+XGI330_TVDataStruct XGI_St2HiTVData[]=
+{
+ { 3,1,840,483,1648,960,0x032,0,0 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 1,1,892,563,690,700,0,0,0 }, /* 01 (320x350,640x350) */
+ { 3,1,840,483,1648,960,0x032,0,0 }, /* 02 (360x400,720x400) */
+ { 1,1,1000,563,785,700,0,0,0 }, /* 03 (720x350) */
+ { 5,2,840,563,1648,960,0x08D,1,0 }, /* 04 (320x240,640x480) */
+ { 8,5,1050,683,1648,960,0x17C,1,0 } /* 05 (400x300,800x600) */
+
+};
+
+XGI330_TVDataStruct XGI_ExtHiTVData[]=
+{
+ { 6,1,840,563,1632,960,0,0,0 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 3,1,960,563,1632,960,0,0,0 }, /* 01 (320x350,640x350) */
+ { 3,1,840,483,1632,960,0,0,0 }, /* 02 (360x400,720x400) */
+ { 3,1,960,563,1632,960,0,0,0 }, /* 03 (720x350) */
+ { 5,1,840,563,1648,960,0x166,1,0 }, /* 04 (320x240,640x480) */
+ { 16,5,1050,683,1648,960,0x143,1,0 }, /* 05 (400x300,800x600) */
+ { 25,12,1260,851,1648,960,0x032,0,0 }, /* 06 (512x384,1024x768) */
+ { 5,4,1575,1124,1648,960,0x128,0,0 }, /* 07 (1280x1024) */
+ { 4,1,1050,563,1548,960,0x143,1,0 }, /* 08 (800x480) */
+ { 5,2,1400,659,1648,960,0x032,0,0 }, /* 09 (1024x576) */
+ { 8,5,1750,803,1648,960,0x128,0,0 } /* 0A (1280x720) */
+
+};
+
+XGI330_TVDataStruct XGI_ExtYPbPr525iData[]=
+{
+ { 9, 5, 1001, 453,1270, 420, 171, 0, 171},
+ { 12, 5, 858, 403,1270, 420, 171, 0, 171},
+ { 9, 5, 1001, 453,1270, 420, 171, 0, 171},
+ { 12, 5, 858, 403,1270, 420, 171, 0, 171},
+ { 143, 80, 836, 523,1250, 420, 224, 0, 0},
+ { 143, 120,1008, 643,1250, 420, 0, 1, 0},
+ { 1, 1,1120, 821,1516, 420, 0, 1, 0}, /*301b*/
+ { 2, 1, 858, 503,1584, 480, 0, 1, 0},
+ { 3, 2,1001, 533,1250, 420, 0, 0, 0}
+};
+
+XGI330_TVDataStruct XGI_StYPbPr525iData[]=
+{
+ { 1, 1, 858, 525,1270, 400, 50, 0, 760},
+ { 1, 1, 858, 525,1270, 350, 50, 0, 640},
+ { 1, 1, 858, 525,1270, 400, 0, 0, 720},
+ { 1, 1, 858, 525,1270, 350, 0, 0, 720},
+ { 1, 1, 858, 525,1270, 480, 0, 0, 760},
+};
+
+XGI330_TVDataStruct XGI_ExtYPbPr525pData[]=
+{
+ { 9, 5, 1001, 453,1270, 420, 171, 0, 171},
+ { 12, 5, 858, 403,1270, 420, 171, 0, 171},
+ { 9, 5, 1001, 453,1270, 420, 171, 0, 171},
+ { 12, 5, 858, 403,1270, 420, 171, 0, 171},
+ { 143, 80, 836, 523,1270, 420, 224, 0, 0},
+ { 143, 120,1008, 643,1270, 420, 0, 1, 0},
+ { 1, 1,1120, 821,1516, 420, 0, 1, 0}, /*301b*/
+ { 2, 1, 858, 503,1584, 480, 0, 1, 0},
+ { 3, 2,1001, 533,1270, 420, 0, 0, 0}
+ };
+
+XGI330_TVDataStruct XGI_StYPbPr525pData[]=
+{
+ { 1, 1,1716, 525,1270, 400, 50, 0, 760},
+ { 1, 1,1716, 525,1270, 350, 50, 0, 640},
+ { 1, 1,1716, 525,1270, 400, 0, 0, 720},
+ { 1, 1,1716, 525,1270, 350, 0, 0, 720},
+ { 1, 1,1716, 525,1270, 480, 0, 0, 760},
+};
+
+XGI330_TVDataStruct XGI_ExtYPbPr750pData[]=
+{
+ { 3, 1, 935, 470,1130, 680, 50, 0, 0}, /* 00 (320x200,320x400,640x200,640x400) */
+ { 24, 7, 935, 420,1130, 680, 50, 0, 0}, /* 01 (320x350,640x350) */
+ { 3, 1, 935, 470,1130, 680, 50, 0, 0}, /* 02 (360x400,720x400) */
+ { 24, 7, 935, 420,1130, 680, 50, 0, 0}, /* 03 (720x350) */
+ { 2, 1,1100, 590,1130, 640, 50, 0, 0}, /* 04 (320x240,640x480) */
+ { 3, 2,1210, 690,1130, 660, 50, 0, 0}, /* 05 (400x300,800x600) */
+ { 1, 1,1375, 878,1130, 640, 638, 0, 0}, /* 06 (1024x768) */
+ { 2, 1, 858, 503,1130, 480, 0, 1, 0}, /* 07 (720x480) */
+ { 5, 4,1815, 570,1130, 660, 50, 0, 0},
+ { 5, 3,1100, 686,1130, 640, 50, 1, 0},
+ { 10, 9,1320, 830,1130, 640, 50, 0, 0}
+};
+
+XGI330_TVDataStruct XGI_StYPbPr750pData[]=
+{
+ { 1, 1,1650, 750,1280, 400, 50, 0, 760},
+ { 1, 1,1650, 750,1280, 350, 50, 0, 640},
+ { 1, 1,1650, 750,1280, 400, 0, 0, 720},
+ { 1, 1,1650, 750,1280, 350, 0, 0, 720},
+ { 1, 1,1650, 750,1280, 480, 0, 0, 760},
+};
+
+UCHAR XGI330_NTSCTiming[] = {
+ 0x17,0x1d,0x03,0x09,0x05,0x06,0x0c,0x0c,
+ 0x94,0x49,0x01,0x0a,0x06,0x0d,0x04,0x0a,
+ 0x06,0x14,0x0d,0x04,0x0a,0x00,0x85,0x1b,
+ 0x0c,0x50,0x00,0x97,0x00,0xda,0x4a,0x17,
+ 0x7d,0x05,0x4b,0x00,0x00,0xe2,0x00,0x02,
+ 0x03,0x0a,0x65,0x9d,0x08,0x92,0x8f,0x40,
+ 0x60,0x80,0x14,0x90,0x8c,0x60,0x14,0x50,
+ 0x00,0x40,0x44,0x00,0xdb,0x02,0x3b,0x00};
+
+UCHAR XGI330_PALTiming[] = {
+ 0x21,0x5A,0x35,0x6e,0x04,0x38,0x3d,0x70,
+ 0x94,0x49,0x01,0x12,0x06,0x3e,0x35,0x6d,
+ 0x06,0x14,0x3e,0x35,0x6d,0x00,0x45,0x2b,
+ 0x70,0x50,0x00,0x9b,0x00,0xd9,0x5d,0x17,
+ 0x7d,0x05,0x45,0x00,0x00,0xe8,0x00,0x02,
+ 0x0d,0x00,0x68,0xb0,0x0b,0x92,0x8f,0x40,
+ 0x60,0x80,0x14,0x90,0x8c,0x60,0x14,0x63,
+ 0x00,0x40,0x3e,0x00,0xe1,0x02,0x28,0x00};
+
+UCHAR XGI330_HiTVExtTiming[] =
+{
+ 0x2D,0x60,0x2C,0x5F,0x08,0x31,0x3A,0x64,
+ 0x28,0x02,0x01,0x3D,0x06,0x3E,0x35,0x6D,
+ 0x06,0x14,0x3E,0x35,0x6D,0x00,0xC5,0x3F,
+ 0x64,0x90,0x33,0x8C,0x18,0x36,0x3E,0x13,
+ 0x2A,0xDE,0x2A,0x44,0x40,0x2A,0x44,0x40,
+ 0x8E,0x8E,0x82,0x07,0x0B,
+ 0x92,0x0F,0x40,0x60,0x80,0x14,0x90,0x8C,
+ 0x60,0x14,0x3D,0x63,0x4F,
+ 0x27,0x00,0xfc,0xff,0x6a,0x00
+
+};
+
+UCHAR XGI330_HiTVSt1Timing[] =
+{
+ 0x32,0x65,0x2C,0x5F,0x08,0x31,0x3A,0x65,
+ 0x28,0x02,0x01,0x3D,0x06,0x3E,0x35,0x6D,
+ 0x06,0x14,0x3E,0x35,0x6D,0x00,0xC5,0x3F,
+ 0x65,0x90,0x7B,0xA8,0x03,0xF0,0x87,0x03,
+ 0x11,0x15,0x11,0xCF,0x10,0x11,0xCF,0x10,
+ 0x35,0x35,0x3B,0x69,0x1D,
+ 0x92,0x0F,0x40,0x60,0x80,0x14,0x90,0x8C,
+ 0x60,0x04,0x86,0xAF,0x5D,
+ 0x0E,0x00,0xfc,0xff,0x2d,0x00
+};
+
+UCHAR XGI330_HiTVSt2Timing[] =
+{
+ 0x32,0x65,0x2C,0x5F,0x08,0x31,0x3A,0x64,
+ 0x28,0x02,0x01,0x3D,0x06,0x3E,0x35,0x6D,
+ 0x06,0x14,0x3E,0x35,0x6D,0x00,0xC5,0x3F,
+ 0x64,0x90,0x33,0x8C,0x18,0x36,0x3E,0x13,
+ 0x2A,0xDE,0x2A,0x44,0x40,0x2A,0x44,0x40,
+ 0x8E,0x8E,0x82,0x07,0x0B,
+ 0x92,0x0F,0x40,0x60,0x80,0x14,0x90,0x8C,
+ 0x60,0x14,0x3D,0x63,0x4F,
+ 0x27,0x00,0xFC,0xff,0x6a,0x00
+};
+
+UCHAR XGI330_HiTVTextTiming[] =
+{
+ 0x32,0x65,0x2C,0x5F,0x08,0x31,0x3A,0x65,
+ 0x28,0x02,0x01,0x3D,0x06,0x3E,0x35,0x6D,
+ 0x06,0x14,0x3E,0x35,0x6D,0x00,0xC5,0x3F,
+ 0x65,0x90,0xE7,0xBC,0x03,0x0C,0x97,0x03,
+ 0x14,0x78,0x14,0x08,0x20,0x14,0x08,0x20,
+ 0xC8,0xC8,0x3B,0xD2,0x26,
+ 0x92,0x0F,0x40,0x60,0x80,0x14,0x90,0x8C,
+ 0x60,0x04,0x96,0x72,0x5C,
+ 0x11,0x00,0xFC,0xFF,0x32,0x00
+};
+
+UCHAR XGI330_YPbPr750pTiming[] =
+{
+ 0x30,0x1d,0xe8,0x09,0x09,0xed,0x0c,0x0c,
+ 0x98,0x0a,0x01,0x0c,0x06,0x0d,0x04,0x0a,
+ 0x06,0x14,0x0d,0x04,0x0a,0x00,0x85,0x3f,
+ 0xed,0x50,0x70,0x9f,0x16,0x59,0x60,0x13,
+ 0x27,0x0b,0x27,0xfc,0x30,0x27,0x1c,0xb0,
+ 0x4b,0x4b,0x6f,0x2f,0x63,
+ 0x92,0x0F,0x40,0x60,0x80,0x14,0x90,0x8C,
+ 0x60,0x14,0x73,0x00,0x40,
+ 0x11,0x00,0xfc,0xff,0x32,0x00
+};
+
+UCHAR XGI330_YPbPr525pTiming[] =
+{
+ 0x3E,0x11,0x06,0x09,0x0b,0x0c,0x0c,0x0c,
+ 0x98,0x0a,0x01,0x0d,0x06,0x0d,0x04,0x0a,
+ 0x06,0x14,0x0d,0x04,0x0a,0x00,0x85,0x3f,
+ 0x0c,0x50,0xb2,0x9f,0x16,0x59,0x4f,0x13,
+ 0xad,0x11,0xad,0x1d,0x40,0x8a,0x3d,0xb8,
+ 0x51,0x5e,0x60,0x49,0x7d,
+ 0x92,0x0F,0x40,0x60,0x80,0x14,0x90,0x8C,
+ 0x60,0x14,0x4B,0x43,0x41,
+ 0x11,0x00,0xFC,0xFF,0x32,0x00
+};
+
+UCHAR XGI330_YPbPr525iTiming[] =
+{
+ 0x1B,0x21,0x03,0x09,0x05,0x06,0x0C,0x0C,
+ 0x94,0x49,0x01,0x0A,0x06,0x0D,0x04,0x0A,
+ 0x06,0x14,0x0D,0x04,0x0A,0x00,0x85,0x1B,
+ 0x0C,0x50,0x00,0x97,0x00,0xDA,0x4A,0x17,
+ 0x7D,0x05,0x4B,0x00,0x00,0xE2,0x00,0x02,
+ 0x03,0x0A,0x65,0x9D,0x08,
+ 0x92,0x8F,0x40,0x60,0x80,0x14,0x90,0x8C,
+ 0x60,0x14,0x4B,0x00,0x40,
+ 0x44,0x00,0xDB,0x02,0x3B,0x00
+
+};
+
+UCHAR XGI330_HiTVGroup3Data[] =
+{
+ 0x00,0x1A,0x22,0x63,0x62,0x22,0x08,0x5F,
+ 0x05,0x21,0xB2,0xB2,0x55,0x77,0x2A,0xA6,
+ 0x25,0x2F,0x47,0xFA,0xC8,0xFF,0x8E,0x20,
+ 0x8C,0x6E,0x60,0x2E,0x58,0x48,0x72,0x44,
+ 0x56,0x36,0x4F,0x6E,0x3F,0x80,0x00,0x80,
+ 0x4F,0x7F,0x03,0xA8,0x7D,0x20,0x1A,0xA9,
+ 0x14,0x05,0x03,0x7E,0x64,0x31,0x14,0x75,
+ 0x18,0x05,0x18,0x05,0x4C,0xA8,0x01
+};
+
+UCHAR XGI330_HiTVGroup3Simu[] =
+{
+ 0x00,0x1A,0x22,0x63,0x62,0x22,0x08,0x95,
+ 0xDB,0x20,0xB8,0xB8,0x55,0x47,0x2A,0xA6,
+ 0x25,0x2F,0x47,0xFA,0xC8,0xFF,0x8E,0x20,
+ 0x8C,0x6E,0x60,0x15,0x26,0xD3,0xE4,0x11,
+ 0x56,0x36,0x4F,0x6E,0x3F,0x80,0x00,0x80,
+ 0x67,0x36,0x01,0x47,0x0E,0x10,0xBE,0xB4,
+ 0x01,0x05,0x03,0x7E,0x65,0x31,0x14,0x75,
+ 0x18,0x05,0x18,0x05,0x4C,0xA8,0x01
+};
+
+UCHAR XGI330_HiTVGroup3Text[] =
+{
+ 0x00,0x1A,0x22,0x63,0x62,0x22,0x08,0xA7,
+ 0xF5,0x20,0xCE,0xCE,0x55,0x47,0x2A,0xA6,
+ 0x25,0x2F,0x47,0xFA,0xC8,0xFF,0x8E,0x20,
+ 0x8C,0x6E,0x60,0x18,0x2C,0x0C,0x20,0x22,
+ 0x56,0x36,0x4F,0x6E,0x3F,0x80,0x00,0x80,
+ 0x93,0x3C,0x01,0x50,0x2F,0x10,0xF4,0xCA,
+ 0x01,0x05,0x03,0x7E,0x65,0x31,0x14,0x75,
+ 0x18,0x05,0x18,0x05,0x4C,0xA8,0x01
+};
+
+UCHAR XGI330_Ren525pGroup3[] =
+{
+ 0x00,0x14,0x15,0x25,0x55,0x15,0x0b,0x13,
+ 0xB1,0x41,0x62,0x62,0xFF,0xF4,0x45,0xa6,
+ 0x25,0x2F,0x67,0xF6,0xbf,0xFF,0x8E,0x20,
+ 0xAC,0xDA,0x60,0xFe,0x6A,0x9A,0x06,0x10,
+ 0xd1,0x04,0x18,0x0a,0xFF,0x80,0x00,0x80,
+ 0x3c,0x77,0x00,0xEF,0xE0,0x10,0xB0,0xE0,
+ 0x10,0x4F,0x0F,0x0F,0x05,0x0F,0x08,0x6E,
+ 0x1a,0x1F,0x25,0x2a,0x4C,0xAA,0x01
+};
+
+UCHAR XGI330_Ren750pGroup3[] =
+{
+ 0x00,0x14,0x15,0x25,0x55,0x15,0x0b,0x7a,
+ 0x54,0x41,0xE7,0xE7,0xFF,0xF4,0x45,0xa6,
+ 0x25,0x2F,0x67,0xF6,0xbf,0xFF,0x8E,0x20,
+ 0xAC,0x6A,0x60,0x2b,0x52,0xCD,0x61,0x10,
+ 0x51,0x04,0x18,0x0a,0x1F,0x80,0x00,0x80,
+ 0xFF,0xA4,0x04,0x2B,0x94,0x21,0x72,0x94,
+ 0x26,0x05,0x01,0x0F,0xed,0x0F,0x0A,0x64,
+ 0x18,0x1D,0x23,0x28,0x4C,0xAA,0x01
+};
+
+XGI_PanelDelayTblStruct XGI330_PanelDelayTbl[]=
+{
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}}
+};
+
+XGI330_LVDSDataStruct XGI330_LVDS320x480Data_1[]=
+{
+ {848, 433,400,525},
+ {848, 389,400,525},
+ {848, 433,400,525},
+ {848, 389,400,525},
+ {848, 518,400, 525},
+ {1056, 628,400,525},
+ {400, 525,400,525},
+ {800, 449,1000, 644},
+ {800, 525,1000, 635}
+};
+
+XGI330_LVDSDataStruct XGI330_LVDS800x600Data_1[]=
+{
+ {848, 433,1060, 629},
+ {848, 389,1060, 629},
+ {848, 433,1060, 629},
+ {848, 389,1060, 629},
+ {848, 518,1060, 629},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {800, 449,1000, 644},
+ {800, 525,1000, 635}
+};
+
+XGI330_LVDSDataStruct XGI330_LVDS800x600Data_2[]=
+{
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {800, 449,1000, 644},
+ {800, 525,1000, 635}
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Data_1[]=
+{
+ { 960 , 438 , 1344 , 806 } , /* 00 (320x200,320x400,640x200,640x400) */
+ { 960 , 388 , 1344 , 806 } , /* 01 (320x350,640x350) */
+ { 1040, 438 , 1344 , 806 } , /* 02 (360x400,720x400) */
+ { 1040, 388 , 1344 , 806 } , /* 03 (720x350) */
+ { 960 , 518 , 1344 , 806 } , /* 04 (320x240,640x480) */
+ {1120 , 638 , 1344 , 806 } , /* 05 (400x300,800x600) */
+ {1344 , 806 , 1344 , 806 } /* 06 (512x384,1024x768) */
+};
+
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Data_2[]=
+{
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {800, 449,1280, 801},
+ {800, 525,1280, 813}
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1280x1024Data_1[]=
+{
+ {1048, 442,1688, 1066},
+ {1048, 392,1688, 1066},
+ {1048, 442,1688, 1066},
+ {1048, 392,1688, 1066},
+ {1048, 522,1688, 1066},
+ {1208, 642,1688, 1066},
+ {1432, 810,1688, 1066},
+ {1688, 1066,1688, 1066}
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1280x1024Data_2[]=
+{
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {800, 449,1280, 801},
+ {800, 525,1280, 813}
+};
+/*
+XGI330_LVDSDataStruct XGI_LVDS1280x768Data_1[]=
+{
+ {768,438,1408,806},
+ {768,388,1408,806},
+ {768,438,1408,806},
+ {768,388,1408,806},
+ {768,518,1408,806},
+ {928,638,1408,806},
+ {1408,806,1408,806},
+ {1408,806,1408,806},
+ {1408,806,1408,806}
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1280x768Data_2[]=
+{
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806}
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1280x768NData_1[]=
+{
+ {704, 438,1344, 806},
+ {704, 388,1344, 806},
+ {704, 438,1344, 806},
+ {704, 388,1344, 806},
+ {704, 518,1344, 806},
+ {864, 638,1344, 806},
+ {1088, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806}
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1280x768NData_2[]=
+{
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806}
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1280x768SData_1[]=
+{
+ {1048,438,1688,806},
+ {1048,388,1688,806},
+ {1148,438,1688,806},
+ {1148,388,1688,806},
+ {1048,518,1688,806},
+ {1208,638,1688,806},
+ {1432,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806}
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1280x768SData_2[]=
+{
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806}
+};
+*/
+XGI330_LVDSDataStruct XGI_LVDS1400x1050Data_1[]=
+{
+ {928,416,1688,1066},
+ {928,366,1688,1066},
+ {928,416,1688,1066},
+ {928,366,1688,1066},
+ {928,496,1688,1066},
+ {1088,616,1688,1066},
+ {1312,784,1688,1066},
+ {1568,1040,1688,1066},
+ {1688,1066,1688,1066}
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1400x1050Data_2[]=
+{
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066}
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1600x1200Data_1[]=
+{ /* ;;[ycchen] 12/05/02 LCDHTxLCDVT=2048x1320 */
+ { 1088,520,2048,1320 },/* 00 (320x200,320x400,640x200,640x400) */
+ { 1088,470,2048,1320 },/* 01 (320x350,640x350) */
+ { 1088,520,2048,1320 },/* 02 (360x400,720x400) */
+ { 1088,470,2048,1320 },/* 03 (720x350) */
+ { 1088,600,2048,1320 },/* 04 (320x240,640x480) */
+ { 1248,720,2048,1320 },/* 05 (400x300,800x600) */
+ { 1472,888,2048,1320 },/* 06 (512x384,1024x768) */
+ { 1728,1144,2048,1320 },/* 07 (640x512,1280x1024) */
+ { 1848,1170,2048,1320 },/* 08 (1400x1050) */
+ { 2048,1320,2048,1320 } /* 09 (1600x1200) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDSNoScalingData[]=
+{
+ { 800,449,800,449 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 800,449,800,449 }, /* 01 (320x350,640x350) */
+ { 800,449,800,449 }, /* 02 (360x400,720x400) */
+ { 800,449,800,449 }, /* 03 (720x350) */
+ { 800,525,800,525 }, /* 04 (640x480x60Hz) */
+ { 1056,628,1056,628 }, /* 05 (800x600x60Hz) */
+ { 1344,806,1344,806 }, /* 06 (1024x768x60Hz) */
+ { 1688,1066,1688,1066 }, /* 07 (1280x1024x60Hz) */
+ { 1688,1066,1688,1066 }, /* 08 (1400x1050x60Hz) ;;[ycchen] 12/19/02 */
+ { 2160,1250,2160,1250 }, /* 09 (1600x1200x60Hz) */
+ { 1688,806,1688,806 } /* 0A (1280x768x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Data_1x75[]=
+{
+ {960,438,1312,800 }, /* 00 (320x200,320x400,640x200,640x400) */
+ {960,388,1312,800 }, /* 01 (320x350,640x350) */
+ {1040,438,1312,800 }, /* 02 (360x400,720x400) */
+ {1040,388,1312,800 }, /* 03 (720x350) */
+ {928,512,1312,800 }, /* 04 (320x240,640x480) */
+ {1088,632,1312,800 }, /* 05 (400x300,800x600) */
+ {1312,800,1312,800 }, /* 06 (512x384,1024x768) */
+};
+
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Data_2x75[]=
+{
+ {1312,800,1312,800}, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {1312,800,1312,800}, /* ; 01 (320x350,640x350) */
+ {1312,800,1312,800}, /* ; 02 (360x400,720x400) */
+ {1312,800,1312,800}, /* ; 03 (720x350) */
+ {1312,800,1312,800}, /* ; 04 (320x240,640x480) */
+ {1312,800,1312,800}, /* ; 05 (400x300,800x600) */
+ {1312,800,1312,800}, /* ; 06 (512x384,1024x768) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1280x1024Data_1x75[]=
+{
+ {1048,442,1688,1066 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {1048,392,1688,1066 }, /* ; 01 (320x350,640x350) */
+ {1128,442,1688,1066 }, /* ; 02 (360x400,720x400) */
+ {1128,392,1688,1066 }, /* ; 03 (720x350) */
+ {1048,522,1688,1066 }, /* ; 04 (320x240,640x480) */
+ {1208,642,1688,1066 }, /* ; 05 (400x300,800x600) */
+ {1432,810,1688,1066 }, /* ; 06 (512x384,1024x768) */
+ {1688,1066,1688,1066 }, /* ; 06; 07 (640x512,1280x1024) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1280x1024Data_2x75[]=
+{
+ {1688,1066,1688,1066 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {1688,1066,1688,1066 }, /* ; 01 (320x350,640x350) */
+ {1688,1066,1688,1066 }, /* ; 02 (360x400,720x400) */
+ {1688,1066,1688,1066 }, /* ; 03 (720x350) */
+ {1688,1066,1688,1066 }, /* ; 04 (320x240,640x480) */
+ {1688,1066,1688,1066 }, /* ; 05 (400x300,800x600) */
+ {1688,1066,1688,1066 }, /* ; 06 (512x384,1024x768) */
+ {1688,1066,1688,1066 }, /* ; 06; 07 (640x512,1280x1024) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDSNoScalingDatax75[]=
+{
+ {800,449,800,449 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {800,449,800,449 }, /* ; 01 (320x350,640x350) */
+ {900,449,900,449 }, /* ; 02 (360x400,720x400) */
+ {900,449,900,449 }, /* ; 03 (720x350) */
+ {800,500,800,500 }, /* ; 04 (640x480x75Hz) */
+ {1056,625,1056,625 }, /* ; 05 (800x600x75Hz) */
+ {1312,800,1312,800 }, /* ; 06 (1024x768x75Hz) */
+ {1688,1066,1688,1066 }, /* ; 07 (1280x1024x75Hz) */
+ {1688,1066,1688,1066 }, /* ; 08 (1400x1050x75Hz) ;;[ycchen] 12/19/02 */
+ {2160,1250,2160,1250 }, /* ; 09 (1600x1200x75Hz) */
+ {1688,806,1688,806 }, /* ; 0A (1280x768x75Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Des_1[]=
+{
+ { 0,1048, 0, 771 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 0,1048, 0, 771 }, /* 01 (320x350,640x350) */
+ { 0,1048, 0, 771 }, /* 02 (360x400,720x400) */
+ { 0,1048, 0, 771 }, /* 03 (720x350) */
+ { 0,1048, 0, 771 }, /* 04 (640x480x60Hz) */
+ { 0,1048, 0, 771 }, /* 05 (800x600x60Hz) */
+ { 0,1048, 805, 770 } /* 06 (1024x768x60Hz) */
+} ;
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Des_2[]=
+{
+ { 1142, 856, 622, 587 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 1142, 856, 597, 562 }, /* 01 (320x350,640x350) */
+ { 1142, 856, 622, 587 }, /* 02 (360x400,720x400) */
+ { 1142, 856, 597, 562 }, /* 03 (720x350) */
+ { 1142,1048, 722, 687 }, /* 04 (640x480x60Hz) */
+ { 1232, 936, 722, 687 }, /* 05 (800x600x60Hz) */
+ { 0,1048, 805, 771 } /* 06 (1024x768x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Des_3[]=
+{
+ { 320, 24, 622, 587 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 320, 24, 597, 562 }, /* 01 (320x350,640x350) */
+ { 320, 24, 622, 587 }, /* 02 (360x400,720x400) */
+ { 320, 24, 597, 562 }, /* 03 (720x350) */
+ { 320, 24, 722, 687 } /* 04 (640x480x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_1[]=
+{
+ { 0,1328, 0, 1025 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 0,1328, 0, 1025 }, /* 01 (320x350,640x350) */
+ { 0,1328, 0, 1025 }, /* 02 (360x400,720x400) */
+ { 0,1328, 0, 1025 }, /* 03 (720x350) */
+ { 0,1328, 0, 1025 }, /* 04 (640x480x60Hz) */
+ { 0,1328, 0, 1025 }, /* 05 (800x600x60Hz) */
+ { 0,1328, 0, 1025 }, /* 06 (1024x768x60Hz) */
+ { 0,1328, 1065, 1024 } /* 07 (1280x1024x60Hz) */
+};
+
+ /* The Display setting for DE Mode Panel */
+XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_2[]=
+{
+ { 1368,1008,752,711 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 1368,1008,729,688 }, /* 01 (320x350,640x350) */
+ { 1408,1048,752,711 }, /* 02 (360x400,720x400) */
+ { 1408,1048,729,688 }, /* 03 (720x350) */
+ { 1368,1008,794,753 }, /* 04 (640x480x60Hz) */
+ { 1448,1068,854,813 }, /* 05 (800x600x60Hz) */
+ { 1560,1200,938,897 }, /* 06 (1024x768x60Hz) */
+ { 0000,1328,0,1025 } /* 07 (1280x1024x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1400x1050Des_1[]=
+{
+ { 0,1448,0,1051 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 0,1448,0,1051 }, /* 01 (320x350,640x350) */
+ { 0,1448,0,1051 }, /* 02 (360x400,720x400) */
+ { 0,1448,0,1051 }, /* 03 (720x350) */
+ { 0,1448,0,1051 }, /* 04 (640x480x60Hz) */
+ { 0,1448,0,1051 }, /* 05 (800x600x60Hz) */
+ { 0,1448,0,1051 }, /* 06 (1024x768x60Hz) */
+ { 0,1448,0,1051 }, /* 07 (1280x1024x60Hz) */
+ { 0,1448,0,1051 } /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1400x1050Des_2[]=
+{
+ { 1308,1068, 781, 766 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 1308,1068, 781, 766 }, /* 01 (320x350,640x350) */
+ { 1308,1068, 781, 766 }, /* 02 (360x400,720x400) */
+ { 1308,1068, 781, 766 }, /* 03 (720x350) */
+ { 1308,1068, 781, 766 }, /* 04 (640x480x60Hz) */
+ { 1388,1148, 841, 826 }, /* 05 (800x600x60Hz) */
+ { 1490,1250, 925, 910 }, /* 06 (1024x768x60Hz) */
+ { 1608,1368,1053,1038 }, /* 07 (1280x1024x60Hz) */
+ { 0,1448,0,1051 } /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1600x1200Des_1[]=
+{
+ { 0,1664,0,1201 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 0,1664,0,1201 }, /* 01 (320x350,640x350) */
+ { 0,1664,0,1201 }, /* 02 (360x400,720x400) */
+ { 0,1664,0,1201 }, /* 03 (720x350) */
+ { 0,1664,0,1201 }, /* 04 (640x480x60Hz) */
+ { 0,1664,0,1201 }, /* 05 (800x600x60Hz) */
+ { 0,1664,0,1201 }, /* 06 (1024x768x60Hz) */
+ { 0,1664,0,1201 }, /* 07 (1280x1024x60Hz) */
+ { 0,1664,0,1201 }, /* 08 (1400x1050x60Hz) */
+ { 0,1664,0,1201 } /* 09 (1600x1200x60Hz) */
+};
+
+
+
+XGI330_LCDDataDesStruct2 XGI_LVDSNoScalingDesData[]=
+{
+ { 0, 648, 448, 405, 96, 2 }, /* 00 (320x200,320x400,640x200,640x400) */
+ { 0, 648, 448, 355, 96, 2 }, /* 01 (320x350,640x350) */
+ { 0, 648, 448, 405, 96, 2 }, /* 02 (360x400,720x400) */
+ { 0, 648, 448, 355, 96, 2 }, /* 03 (720x350) */
+ { 0, 648, 1, 483, 96, 2 }, /* 04 (640x480x60Hz) */
+ { 0, 840, 627, 600, 128, 4 }, /* 05 (800x600x60Hz) */
+ { 0,1048, 805, 770, 136, 6 }, /* 06 (1024x768x60Hz) */
+ { 0,1328,0,1025, 112, 3 }, /* 07 (1280x1024x60Hz) */
+ { 0,1438,0,1051, 112, 3 }, /* 08 (1400x1050x60Hz) ;;[ycchen] 12/19/02 */
+ { 0,1664,0,1201, 192, 3 }, /* 09 (1600x1200x60Hz) */
+ { 0,1328,0,0771, 112, 6 } /* 0A (1280x768x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Des_1x75[]= /* ; 1024x768 Full-screen */
+{
+ {0,1040,0,769}, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {0,1040,0,769}, /* ; 01 (320x350,640x350) */
+ {0,1040,0,769}, /* ; 02 (360x400,720x400) */
+ {0,1040,0,769}, /* ; 03 (720x350) */
+ {0,1040,0,769}, /* ; 04 (640x480x75Hz) */
+ {0,1040,0,769}, /* ; 05 (800x600x75Hz) */
+ {0,1040,0,769} /* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Des_2x75[]= /* ; 1024x768 center-screen (Enh. Mode) */
+{
+ {1142, 856,622,587 }, /* 00 (320x200,320x400,640x200,640x400) */
+ {1142, 856,597,562 }, /* 01 (320x350,640x350) */
+ {1142, 856,622,587 }, /* 02 (360x400,720x400) */
+ {1142, 856,597,562 }, /* 03 (720x350) */
+ {1142,1048,722,687 }, /* 04 (640x480x60Hz) */
+ {1232, 936,722,687 }, /* 05 (800x600x60Hz) */
+ { 0,1048,805,771 } /* 06 (1024x768x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Des_3x75[]= /* ; 1024x768 center-screen (St.Mode) */
+{
+ {320,24,622,587 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {320,24,597,562 }, /* ; 01 (320x350,640x350) */
+ {320,24,622,587 }, /* ; 02 (360x400,720x400) */
+ {320,24,597,562 }, /* ; 03 (720x350) */
+ {320,24,722,687 } /* ; 04 (640x480x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_1x75[]=
+{
+ {0,1296,0,1025}, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {0,1296,0,1025}, /* ; 01 (320x350,640x350) */
+ {0,1296,0,1025}, /* ; 02 (360x400,720x400) */
+ {0,1296,0,1025}, /* ; 03 (720x350) */
+ {0,1296,0,1025}, /* ; 04 (640x480x75Hz) */
+ {0,1296,0,1025}, /* ; 05 (800x600x75Hz) */
+ {0,1296,0,1025}, /* ; 06 (1024x768x75Hz) */
+ {0,1296,0,1025} /* ; 07 (1280x1024x75Hz) */
+};
+
+/* The Display setting for DE Mode Panel */
+XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_2x75[]= /* [ycchen] 02/18/03 Set DE as default */
+{
+ {1368,976,752,711 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+ {1368,976,729,688 }, /* ; 01 (320x350,640x350) */
+ {1408,976,752,711 }, /* ; 02 (360x400,720x400) */
+ {1408,976,729,688 }, /* ; 03 (720x350) */
+ {1368,976,794,753 }, /* ; 04 (640x480x75Hz) */
+ {1448,1036,854,813}, /* ; 05 (800x600x75Hz) */
+ {1560,1168,938,897}, /* ; 06 (1024x768x75Hz) */
+ {0,1296,0,1025 } /* ; 07 (1280x1024x75Hz) */
+};
+
+XGI330_LCDDataDesStruct2 XGI_LVDSNoScalingDesDatax75[]= /* Scaling LCD 75Hz */
+{
+ { 0,648,448,405,96,2 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+ { 0,648,448,355,96,2 }, /* ; 01 (320x350,640x350) */
+ { 0,729,448,405,108,2 }, /* ; 02 (360x400,720x400) */
+ { 0,729,448,355,108,2 }, /* ; 03 (720x350) */
+ { 0,656,0,481,64,3 }, /* ; 04 (640x480x75Hz) */
+ { 0,816,0,601,80,3 }, /* ; 05 (800x600x75Hz) */
+ { 0,1040,0,769,96,3 }, /* ; 06 (1024x768x75Hz) */
+ { 0,1296,0,1025,144,3 }, /* ; 07 (1280x1024x75Hz) */
+ { 0,1448,0,1051,112,3 }, /* ; 08 (1400x1050x75Hz) ;;[ycchen] 12/19/02 */
+ { 0,1664,0,1201,192,3 }, /* ; 09 (1600x1200x75Hz) */
+ { 0,1328,0,771,112,6 } /* ; 0A (1280x768x75Hz) */
+};
+
+XGI330_LVDSDataStruct XGI330_LVDS640x480Data_1[]=
+{
+ {800, 449, 800, 449},
+ {800, 449, 800, 449},
+ {800, 449, 800, 449},
+ {800, 449, 800, 449},
+ {800, 525, 800, 525},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628}
+};
+
+XGI330_CHTVDataStruct XGI_CHTVUNTSCData[]=
+{
+ {840, 600, 840, 600},
+ {840, 600, 840, 600},
+ {840, 600, 840, 600},
+ {840, 600, 840, 600},
+ {784, 600, 784, 600},
+ {1064, 750,1064, 750}
+};
+
+XGI330_CHTVDataStruct XGI_CHTVONTSCData[]=
+{
+ {840, 525, 840, 525},
+ {840, 525, 840, 525},
+ {840, 525, 840, 525},
+ {840, 525, 840, 525},
+ {784, 525, 784, 525},
+ {1040, 700,1040, 700}
+};
+
+XGI330_CHTVDataStruct XGI_CHTVUPALData[]=
+{
+ {1008, 625,1008, 625},
+ {1008, 625,1008, 625},
+ {1008, 625,1008, 625},
+ {1008, 625,1008, 625},
+ {840, 750, 840, 750},
+ {936, 836, 936, 836}
+};
+
+XGI330_CHTVDataStruct XGI_CHTVOPALData[]=
+{
+ {1008, 625,1008, 625},
+ {1008, 625,1008, 625},
+ {1008, 625,1008, 625},
+ {1008, 625,1008, 625},
+ {840, 625, 840, 625},
+ {960, 750, 960, 750}
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_1_H[]=
+{
+ /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+ {{ 0x4B,0x27,0x8F,0x32,0x1B,0x00,0x45,0x00 }}, /* 00 (320x) */
+ {{ 0x4B,0x27,0x8F,0x2B,0x03,0x00,0x44,0x00 }}, /* 01 (360x) */
+ {{ 0x55,0x31,0x99,0x46,0x1D,0x00,0x55,0x00 }}, /* 02 (400x) */
+ {{ 0x63,0x3F,0x87,0x4A,0x93,0x00,0x01,0x00 }}, /* 03 (512x) */
+ {{ 0x73,0x4F,0x97,0x55,0x86,0x00,0x05,0x00 }}, /* 04 (640x) */
+ {{ 0x73,0x4F,0x97,0x55,0x86,0x00,0x05,0x00 }}, /* 05 (720x) */
+ {{ 0x87,0x63,0x8B,0x69,0x1A,0x00,0x26,0x00 }}, /* 06 (800x) */
+ {{ 0xA3,0x7F,0x87,0x86,0x97,0x00,0x02,0x00 }} /* 07 (1024x) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_1_H[]=
+{
+ /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+ {{ 0x56,0x27,0x9A,0x30,0x1E,0x00,0x05,0x00 }}, /* 00 (320x) */
+ {{ 0x56,0x27,0x9A,0x30,0x1E,0x00,0x05,0x00 }}, /* 01 (360x) */
+ {{ 0x60,0x31,0x84,0x3A,0x88,0x00,0x01,0x00 }}, /* 02 (400x) */
+ {{ 0x6E,0x3F,0x92,0x48,0x96,0x00,0x01,0x00 }}, /* 03 (512x) */
+ {{ 0x7E,0x4F,0x82,0x58,0x06,0x00,0x06,0x00 }}, /* 04 (640x) */
+ {{ 0x7E,0x4F,0x82,0x58,0x06,0x00,0x06,0x00 }}, /* 05 (720x) */
+ {{ 0x92,0x63,0x96,0x6C,0x1A,0x00,0x06,0x00 }}, /* 06 (800x) */
+ {{ 0xAE,0x7F,0x92,0x88,0x96,0x00,0x02,0x00 }}, /* 07 (1024x) */
+ {{ 0xCE,0x9F,0x92,0xA8,0x16,0x00,0x07,0x00 }} /* 08 (1280x) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_2_H[]=
+{
+ /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+ {{ 0x63,0x27,0x87,0x3B,0x8C,0x00,0x01,0x00 }}, /* 00 (320x) */
+ {{ 0x63,0x27,0x87,0x3B,0x8C,0x00,0x01,0x00 }}, /* 01 (360x) */
+ {{ 0x63,0x31,0x87,0x3D,0x8E,0x00,0x01,0x00 }}, /* 02 (400x) */
+ {{ 0x63,0x3F,0x87,0x45,0x96,0x00,0x01,0x00 }}, /* 03 (512x) */
+ {{ 0xA3,0x4F,0x87,0x6E,0x9F,0x00,0x06,0x00 }}, /* 04 (640x) */
+ {{ 0xA3,0x4F,0x87,0x6E,0x9F,0x00,0x06,0x00 }}, /* 05 (720x) */
+ {{ 0xA3,0x63,0x87,0x78,0x89,0x00,0x02,0x00 }}, /* 06 (800x) */
+ {{ 0xA3,0x7F,0x87,0x86,0x97,0x00,0x02,0x00 }} /* 07 (1024x) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_2_H[]=
+{
+ /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+ {{ 0x7E,0x3B,0x9A,0x44,0x12,0x00,0x01,0x00 }}, /* 00 (320x) */
+ {{ 0x7E,0x3B,0x9A,0x44,0x12,0x00,0x01,0x00 }}, /* 01 (360x) */
+ {{ 0x7E,0x40,0x84,0x49,0x91,0x00,0x01,0x00 }}, /* 02 (400x) */
+ {{ 0x7E,0x47,0x93,0x50,0x9E,0x00,0x01,0x00 }}, /* 03 (512x) */
+ {{ 0xCE,0x77,0x8A,0x80,0x8E,0x00,0x02,0x00 }}, /* 04 (640x) */
+ {{ 0xCE,0x77,0x8A,0x80,0x8E,0x00,0x02,0x00 }}, /* 05 (720x) */
+ {{ 0xCE,0x81,0x94,0x8A,0x98,0x00,0x02,0x00 }}, /* 06 (800x) */
+ {{ 0xCE,0x8F,0x82,0x98,0x06,0x00,0x07,0x00 }}, /* 07 (1024x) */
+ {{ 0xCE,0x9F,0x92,0xA8,0x16,0x00,0x07,0x00 }} /* 08 (1280x) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11400x1050_1_H[]=
+{ /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+ {{ 0x47,0x27,0x8B,0x2C,0x1A,0x00,0x05,0x00 }}, /* 00 (320x) */
+ {{ 0x47,0x27,0x8B,0x30,0x1E,0x00,0x05,0x00 }}, /* 01 (360x) */
+ {{ 0x51,0x31,0x95,0x36,0x04,0x00,0x01,0x00 }}, /* 02 (400x) */
+ {{ 0x5F,0x3F,0x83,0x44,0x92,0x00,0x01,0x00 }}, /* 03 (512x) */
+ {{ 0x6F,0x4F,0x93,0x54,0x82,0x00,0x05,0x00 }}, /* 04 (640x) */
+ {{ 0x6F,0x4F,0x93,0x54,0x82,0x00,0x05,0x00 }}, /* 05 (720x) */
+ {{ 0x83,0x63,0x87,0x68,0x16,0x00,0x06,0x00 }}, /* 06 (800x) */
+ {{ 0x9F,0x7F,0x83,0x84,0x92,0x00,0x02,0x00 }}, /* 07 (1024x) */
+ {{ 0xBF,0x9F,0x83,0xA4,0x12,0x00,0x07,0x00 }}, /* 08 (1280x) */
+ {{ 0xCE,0xAE,0x92,0xB3,0x01,0x00,0x03,0x00 }} /* 09 (1400x) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11400x1050_2_H[]=
+{ /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+ {{ 0x76,0x3F,0x83,0x45,0x8C,0x00,0x41,0x00 }}, /* 00 (320x) */
+ {{ 0x76,0x3F,0x83,0x45,0x8C,0x00,0x41,0x00 }}, /* 01 (360x) */
+ {{ 0x76,0x31,0x9A,0x48,0x9F,0x00,0x41,0x00 }}, /* 02 (400x) */
+ {{ 0x76,0x3F,0x9A,0x4F,0x96,0x00,0x41,0x00 }}, /* 03 (512x) */
+ {{ 0xCE,0x7E,0x82,0x87,0x9E,0x00,0x02,0x00 }}, /* 04 (640x) */
+ {{ 0xCE,0x7E,0x82,0x87,0x9E,0x00,0x02,0x00 }}, /* 05 (720x) */
+ {{ 0xCE,0x63,0x92,0x96,0x04,0x00,0x07,0x00 }}, /* 06 (800x) */
+ {{ 0xCE,0x7F,0x92,0xA4,0x12,0x00,0x07,0x00 }}, /* 07 (1024x) */
+ {{ 0xCE,0x9F,0x92,0xB4,0x02,0x00,0x03,0x00 }}, /* 08 (1280x) */
+ {{ 0xCE,0xAE,0x92,0xBC,0x0A,0x00,0x03,0x00 }} /* 09 (1400x) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11600x1200_1_H[]=
+/* ;302lv channelA [ycchen] 12/05/02 LCDHT=2048 */
+{ /* ; CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+ {{ 0x5B,0x27,0x9F,0x32,0x0A,0x00,0x01,0x00 }},/* 00 (320x) */
+ {{ 0x5B,0x27,0x9F,0x32,0x0A,0x00,0x01,0x00 }},/* 01 (360x) */
+ {{ 0x65,0x31,0x89,0x3C,0x94,0x00,0x01,0x00 }},/* 02 (400x) */
+ {{ 0x73,0x3F,0x97,0x4A,0x82,0x00,0x05,0x00 }},/* 03 (512x) */
+ {{ 0x83,0x4F,0x87,0x51,0x09,0x00,0x06,0x00 }},/* 04 (640x) */
+ {{ 0x83,0x4F,0x87,0x51,0x09,0x00,0x06,0x00 }},/* 05 (720x) */
+ {{ 0x97,0x63,0x9B,0x65,0x1D,0x00,0x06,0xF0 }},/* 06 (800x) */
+ {{ 0xB3,0x7F,0x97,0x81,0x99,0x00,0x02,0x00 }},/* 07 (1024x) */
+ {{ 0xD3,0x9F,0x97,0xA1,0x19,0x00,0x07,0x00 }},/* 08 (1280x) */
+ {{ 0xE2,0xAE,0x86,0xB9,0x91,0x00,0x03,0x00 }},/* 09 (1400x) */
+ {{ 0xFB,0xC7,0x9F,0xC9,0x81,0x00,0x07,0x00 }} /* 0A (1600x) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_1_V[]=
+{ /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A+CR09(5->7) */
+ {{ 0x97,0x1F,0x60,0x87,0x5D,0x83,0x10 }}, /* 00 (x350) */
+ {{ 0xB4,0x1F,0x92,0x89,0x8F,0xB5,0x30 }}, /* 01 (x400) */
+ {{ 0x04,0x3E,0xE2,0x89,0xDF,0x05,0x00 }}, /* 02 (x480) */
+ {{ 0x7C,0xF0,0x5A,0x8F,0x57,0x7D,0xA0 }}, /* 03 (x600) */
+ {{ 0x24,0xF5,0x02,0x88,0xFF,0x25,0x90 }} /* 04 (x768) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_2_V[]=
+{ /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+ {{ 0x24,0xBB,0x31,0x87,0x5D,0x25,0x30 }}, /* 00 (x350) */
+ {{ 0x24,0xBB,0x4A,0x80,0x8F,0x25,0x30 }}, /* 01 (x400) */
+ {{ 0x24,0xBB,0x72,0x88,0xDF,0x25,0x30 }}, /* 02 (x480) */
+ {{ 0x24,0xF1,0xAE,0x84,0x57,0x25,0xB0 }}, /* 03 (x600) */
+ {{ 0x24,0xF5,0x02,0x88,0xFF,0x25,0x90 }} /* 04 (x768) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_1_V[]=
+{ /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+ {{ 0x86,0x1F,0x5E,0x82,0x5D,0x87,0x00 }}, /* 00 (x350) */
+ {{ 0xB8,0x1F,0x90,0x84,0x8F,0xB9,0x30 }}, /* 01 (x400) */
+ {{ 0x08,0x3E,0xE0,0x84,0xDF,0x09,0x00 }}, /* 02 (x480) */
+ {{ 0x80,0xF0,0x58,0x8C,0x57,0x81,0xA0 }}, /* 03 (x600) */
+ {{ 0x28,0xF5,0x00,0x84,0xFF,0x29,0x90 }}, /* 04 (x768) */
+ {{ 0x28,0x5A,0x13,0x87,0xFF,0x29,0xA9 }} /* 05 (x1024) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_2_V[]=
+{ /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+ {{ 0x28,0xD2,0xAF,0x83,0xAE,0xD8,0xA1 }}, /* 00 (x350) */
+ {{ 0x28,0xD2,0xC8,0x8C,0xC7,0xF2,0x81 }}, /* 01 (x400) */
+ {{ 0x28,0xD2,0xF0,0x84,0xEF,0x1A,0xB1 }}, /* 02 (x480) */
+ {{ 0x28,0xDE,0x2C,0x8F,0x2B,0x56,0x91 }}, /* 03 (x600) */
+ {{ 0x28,0xDE,0x80,0x83,0x7F,0xAA,0x91 }}, /* 04 (x768) */
+ {{ 0x28,0x5A,0x13,0x87,0xFF,0x29,0xA9 }} /* 05 (x1024) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11400x1050_1_V[]=
+{ /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+ {{ 0x6C,0x1F,0x60,0x84,0x5D,0x6D,0x10 }}, /* 00 (x350) */
+ {{ 0x9E,0x1F,0x93,0x86,0x8F,0x9F,0x30 }}, /* 01 (x400) */
+ {{ 0xEE,0x1F,0xE2,0x86,0xDF,0xEF,0x10 }}, /* 02 (x480) */
+ {{ 0x66,0xF0,0x5A,0x8e,0x57,0x67,0xA0 }}, /* 03 (x600) */
+ {{ 0x0E,0xF5,0x02,0x86,0xFF,0x0F,0x90 }}, /* 04 (x768) */
+ {{ 0x0E,0x5A,0x02,0x86,0xFF,0x0F,0x89 }}, /* 05 (x1024) */
+ {{ 0x28,0x10,0x1A,0x80,0x19,0x29,0x0F }} /* 06 (x1050) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11400x1050_2_V[]=
+{ /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+ {{ 0x28,0x92,0xB6,0x83,0xB5,0xCF,0x81 }}, /* 00 (x350) */
+ {{ 0x28,0x92,0xD5,0x82,0xD4,0xEE,0x81 }}, /* 01 (x400) */
+ {{ 0x28,0x92,0xFD,0x8A,0xFC,0x16,0xB1 }}, /* 02 (x480) */
+ {{ 0x28,0xD4,0x39,0x86,0x57,0x29,0x81 }}, /* 03 (x600) */
+ {{ 0x28,0xD4,0x8D,0x9A,0xFF,0x29,0xA1 }}, /* 04 (x768) */
+ {{ 0x28,0x5A,0x0D,0x9A,0xFF,0x29,0xA9 }}, /* 05 (x1024) */
+ {{ 0x28,0x10,0x1A,0x87,0x19,0x29,0x8F }} /* 06 (x1050) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11600x1200_1_V[]=
+{
+ /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A+CR09(5->7) */
+ {{ 0xd4,0x1F,0x81,0x84,0x5D,0xd5,0x10 }}, /* 00 (x350) */
+ {{ 0x06,0x3e,0xb3,0x86,0x8F,0x07,0x20 }}, /* 01 (x400) */
+ {{ 0x56,0xba,0x03,0x86,0xDF,0x57,0x00 }}, /* 02 (x480) */
+ {{ 0xce,0xF0,0x7b,0x8e,0x57,0xcf,0xa0 }}, /* 03 (x600) */
+ {{ 0x76,0xF5,0x23,0x86,0xFF,0x77,0x90 }}, /* 04 (x768) */
+ {{ 0x76,0x5A,0x23,0x86,0xFF,0x77,0x89 }}, /* 05 (x1024) */
+ {{ 0x90,0x10,0x1A,0x8E,0x19,0x91,0x2F }}, /* 06 (x1050) */
+ {{ 0x26,0x11,0xd3,0x86,0xaF,0x27,0x3f }} /* 07 (x1200) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_1_Hx75[]=
+{ /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+ {{ 0x4B,0x27,0x8F,0x32,0x1B,0x00,0x45,0x00 }},/* ; 00 (320x) */
+ {{ 0x4B,0x27,0x8F,0x2B,0x03,0x00,0x44,0x00 }},/* ; 01 (360x) */
+ {{ 0x55,0x31,0x99,0x46,0x1D,0x00,0x55,0x00 }},/* ; 02 (400x) */
+ {{ 0x63,0x3F,0x87,0x4A,0x93,0x00,0x01,0x00 }},/* ; 03 (512x) */
+ {{ 0x6F,0x4F,0x93,0x54,0x80,0x00,0x05,0x00 }},/* ; 04 (640x) */
+ {{ 0x6F,0x4F,0x93,0x54,0x80,0x00,0x05,0x00 }},/* ; 05 (720x) */
+ {{ 0x83,0x63,0x87,0x68,0x14,0x00,0x26,0x00 }},/* ; 06 (800x) */
+ {{ 0x9F,0x7F,0x83,0x85,0x91,0x00,0x02,0x00 }} /* ; 07 (1024x) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_1_Vx75[]=
+{ /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A+CR09(5->7) */
+ {{ 0x97,0x1F,0x60,0x87,0x5D,0x83,0x10 }},/* ; 00 (x350) */
+ {{ 0xB4,0x1F,0x92,0x89,0x8F,0xB5,0x30 }},/* ; 01 (x400) */
+ {{ 0xFE,0x1F,0xE0,0x84,0xDF,0xFF,0x10 }},/* ; 02 (x480) */
+ {{ 0x76,0xF0,0x58,0x8C,0x57,0x77,0xA0 }},/* ; 03 (x600) */
+ {{ 0x1E,0xF5,0x00,0x83,0xFF,0x1F,0x90 }} /* ; 04 (x768) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_2_Hx75[]=
+{ /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+ {{ 0x63,0x27,0x87,0x3B,0x8C,0x00,0x01,0x00 }},/* ; 00 (320x) */
+ {{ 0x63,0x27,0x87,0x3B,0x8C,0x00,0x01,0x00 }},/* ; 01 (360x) */
+ {{ 0x63,0x31,0x87,0x3D,0x8E,0x00,0x01,0x00 }},/* ; 02 (400x) */
+ {{ 0x63,0x3F,0x87,0x45,0x96,0x00,0x01,0x00 }},/* ; 03 (512x) */
+ {{ 0xA3,0x4F,0x87,0x6E,0x9F,0x00,0x06,0x00 }},/* ; 04 (640x) */
+ {{ 0xA3,0x4F,0x87,0x6E,0x9F,0x00,0x06,0x00 }},/* ; 05 (720x) */
+ {{ 0xA3,0x63,0x87,0x78,0x89,0x00,0x02,0x00 }},/* ; 06 (800x) */
+ {{ 0xA3,0x7F,0x87,0x86,0x97,0x00,0x02,0x00 }} /* ; 07 (1024x) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_2_Vx75[]=
+{ /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+ {{ 0x24,0xBB,0x31,0x87,0x5D,0x25,0x30 }},/* ; 00 (x350) */
+ {{ 0x24,0xBB,0x4A,0x80,0x8F,0x25,0x30 }},/* ; 01 (x400) */
+ {{ 0x24,0xBB,0x72,0x88,0xDF,0x25,0x30 }},/* ; 02 (x480) */
+ {{ 0x24,0xF1,0xAE,0x84,0x57,0x25,0xB0 }},/* ; 03 (x600) */
+ {{ 0x24,0xF5,0x02,0x88,0xFF,0x25,0x90 }} /* ; 04 (x768) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_1_Hx75[]=
+{ /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+ {{ 0x56,0x27,0x9A,0x30,0x1E,0x00,0x05,0x00 }},/* ; 00 (320x) */
+ {{ 0x56,0x27,0x9A,0x30,0x1E,0x00,0x05,0x00 }},/* ; 01 (360x) */
+ {{ 0x60,0x31,0x84,0x3A,0x88,0x00,0x01,0x00 }},/* ; 02 (400x) */
+ {{ 0x6E,0x3F,0x92,0x48,0x96,0x00,0x01,0x00 }},/* ; 03 (512x) */
+ {{ 0x7E,0x4F,0x82,0x54,0x06,0x00,0x06,0x00 }},/* ; 04 (640x) */
+ {{ 0x7E,0x4F,0x82,0x54,0x06,0x00,0x06,0x00 }},/* ; 05 (720x) */
+ {{ 0x92,0x63,0x96,0x68,0x1A,0x00,0x06,0x00 }},/* ; 06 (800x) */
+ {{ 0xAE,0x7F,0x92,0x84,0x96,0x00,0x02,0x00 }},/* ; 07 (1024x) */
+ {{ 0xCE,0x9F,0x92,0xA5,0x17,0x00,0x07,0x00 }} /* ; 08 (1280x) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_1_Vx75[]=
+{ /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+ {{ 0x86,0xD1,0xBC,0x80,0xBB,0xE5,0x00 }},/* ; 00 (x350) */
+ {{ 0xB8,0x1F,0x90,0x84,0x8F,0xB9,0x30 }},/* ; 01 (x400) */
+ {{ 0x08,0x3E,0xE0,0x84,0xDF,0x09,0x00 }},/* ; 02 (x480) */
+ {{ 0x80,0xF0,0x58,0x8C,0x57,0x81,0xA0 }},/* ; 03 (x600) */
+ {{ 0x28,0xF5,0x00,0x84,0xFF,0x29,0x90 }},/* ; 04 (x768) */
+ {{ 0x28,0x5A,0x13,0x87,0xFF,0x29,0xA9 }} /* ; 05 (x1024) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_2_Hx75[]=
+{
+ /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+ {{ 0x7E,0x3B,0x9A,0x44,0x12,0x00,0x01,0x00 }},/* ; 00 (320x) */
+ {{ 0x7E,0x3B,0x9A,0x44,0x12,0x00,0x01,0x00 }},/* ; 01 (360x) */
+ {{ 0x7E,0x40,0x84,0x49,0x91,0x00,0x01,0x00 }},/* ; 02 (400x) */
+ {{ 0x7E,0x47,0x93,0x50,0x9E,0x00,0x01,0x00 }},/* ; 03 (512x) */
+ {{ 0xCE,0x77,0x8A,0x80,0x8E,0x00,0x02,0x00 }},/* ; 04 (640x) */
+ {{ 0xCE,0x77,0x8A,0x80,0x8E,0x00,0x02,0x00 }},/* ; 05 (720x) */
+ {{ 0xCE,0x81,0x94,0x8A,0x98,0x00,0x02,0x00 }},/* ; 06 (800x) */
+ {{ 0xCE,0x8F,0x82,0x98,0x06,0x00,0x07,0x00 }},/* ; 07 (1024x) */
+ {{ 0xCE,0x9F,0x92,0xA8,0x16,0x00,0x07,0x00 }} /* ; 08 (1280x) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_2_Vx75[]=
+{
+ /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+ {{ 0x28,0xD2,0xAF,0x83,0xAE,0xD8,0xA1 }},/* ; 00 (x350) */
+ {{ 0x28,0xD2,0xC8,0x8C,0xC7,0xF2,0x81 }},/* ; 01 (x400) */
+ {{ 0x28,0xD2,0xF0,0x84,0xEF,0x1A,0xB1 }},/* ; 02 (x480) */
+ {{ 0x28,0xDE,0x2C,0x8F,0x2B,0x56,0x91 }},/* ; 03 (x600) */
+ {{ 0x28,0xDE,0x80,0x83,0x7F,0xAA,0x91 }},/* ; 04 (x768) */
+ {{ 0x28,0x5A,0x13,0x87,0xFF,0x29,0xA9 }} /* ; 05 (x1024) */
+};
+
+XGI_LVDSCRT1DataStruct XGI_CHTVCRT1UNTSC[]=
+{
+ {{0x64,0x4f,0x88,0x56,0x9f,0x56,0x3e,
+ 0xe8,0x84,0x8f,0x57,0x20,0x00,0x01,0x00 }},
+ {{0x64,0x4f,0x88,0x56,0x9f,0x56,0x3e,
+ 0xd0,0x82,0x5d,0x57,0x00,0x00,0x01,0x00 }},
+ {{0x64,0x4f,0x88,0x56,0x9f,0x56,0x3e,
+ 0xe8,0x84,0x8f,0x57,0x20,0x00,0x01,0x00 }},
+ {{0x64,0x4f,0x88,0x56,0x9f,0x56,0x3e,
+ 0xd0,0x82,0x5d,0x57,0x00,0x00,0x01,0x00 }},
+ {{0x5d,0x4f,0x81,0x53,0x9c,0x56,0xba,
+ 0x18,0x84,0xdf,0x57,0x00,0x00,0x01,0x00 }},
+ {{0x80,0x63,0x84,0x6c,0x17,0xec,0xf0,
+ 0x90,0x8c,0x57,0xed,0x20,0x00,0x06,0x01 }}
+};
+
+XGI_LVDSCRT1DataStruct XGI_CHTVCRT1ONTSC[]=
+{
+ {{0x64,0x4f,0x88,0x5a,0x9f,0x0b,0x3e,
+ 0xc0,0x84,0x8f,0x0c,0x20,0x00,0x01,0x00 }},
+ {{0x64,0x4f,0x88,0x5a,0x9f,0x0b,0x3e,
+ 0xb0,0x8d,0x5d,0x0c,0x00,0x00,0x01,0x00 }},
+ {{0x64,0x4f,0x88,0x5a,0x9f,0x0b,0x3e,
+ 0xc0,0x84,0x8f,0x0c,0x20,0x00,0x01,0x00 }},
+ {{0x64,0x4f,0x88,0x5a,0x9f,0x0b,0x3e,
+ 0xb0,0x8d,0x5d,0x0c,0x00,0x00,0x01,0x00 }},
+ {{0x5d,0x4f,0x81,0x56,0x9c,0x0b,0x3e,
+ 0xe8,0x84,0xdf,0x0c,0x00,0x00,0x01,0x00 }},
+ {{0x7d,0x63,0x81,0x6a,0x16,0xba,0xf0,
+ 0x7f,0x86,0x57,0xbb,0x00,0x00,0x06,0x01 }}
+};
+
+XGI_LVDSCRT1DataStruct XGI_CHTVCRT1UPAL[]=
+{
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+ 0xf8,0x83,0x8f,0x70,0x20,0x00,0x05,0x00 }},
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+ 0xde,0x81,0x5d,0x70,0x00,0x00,0x05,0x00 }},
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+ 0xf8,0x83,0x8f,0x70,0x20,0x00,0x05,0x00 }},
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+ 0xde,0x81,0x5d,0x70,0x00,0x00,0x05,0x00 }},
+ {{0x64,0x4f,0x88,0x55,0x80,0xec,0xba,
+ 0x50,0x84,0xdf,0xed,0x00,0x00,0x05,0x00 }},
+ {{0x70,0x63,0x94,0x68,0x8d,0x42,0xf1,
+ 0xc8,0x8c,0x57,0xe9,0x20,0x00,0x05,0x01 }}
+};
+
+XGI_LVDSCRT1DataStruct XGI_CHTVCRT1OPAL[]=
+{
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+ 0xf0,0x83,0x8f,0x70,0x20,0x00,0x05,0x00 }},
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+ 0xde,0x81,0x5d,0x70,0x00,0x00,0x05,0x00 }},
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+ 0xf0,0x83,0x8f,0x70,0x20,0x00,0x05,0x00 }},
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+ 0xde,0x81,0x5d,0x70,0x00,0x00,0x05,0x00 }},
+ {{0x64,0x4f,0x88,0x55,0x80,0x6f,0xba,
+ 0x20,0x83,0xdf,0x70,0x00,0x00,0x05,0x00 }},
+ {{0x73,0x63,0x97,0x69,0x8e,0xec,0xf0,
+ 0x90,0x8c,0x57,0xed,0x20,0x00,0x05,0x01 }}
+};
+
+/*add for new UNIVGABIOS*/
+XGI330_LCDDataTablStruct XGI_LCDDataTable[]=
+{
+ {Panel1024x768,0x0019,0x0001,0}, /* XGI_ExtLCD1024x768Data */
+ {Panel1024x768,0x0019,0x0000,1}, /* XGI_StLCD1024x768Data */
+ {Panel1024x768,0x0018,0x0010,2}, /* XGI_CetLCD1024x768Data */
+ {Panel1280x1024,0x0019,0x0001,3}, /* XGI_ExtLCD1280x1024Data */
+ {Panel1280x1024,0x0019,0x0000,4}, /* XGI_StLCD1280x1024Data */
+ {Panel1280x1024,0x0018,0x0010,5}, /* XGI_CetLCD1280x1024Data */
+ {Panel1400x1050,0x0019,0x0001,6}, /* XGI_ExtLCD1400x1050Data */
+ {Panel1400x1050,0x0019,0x0000,7}, /* XGI_StLCD1400x1050Data */
+ {Panel1400x1050,0x0018,0x0010,8}, /* XGI_CetLCD1400x1050Data */
+ {Panel1600x1200,0x0019,0x0001,9}, /* XGI_ExtLCD1600x1200Data */
+ {Panel1600x1200,0x0019,0x0000,10}, /* XGI_StLCD1600x1200Data */
+ {PanelRef60Hz,0x0008,0x0008,11}, /* XGI_NoScalingData */
+ {Panel1024x768x75,0x0019,0x0001,12}, /* XGI_ExtLCD1024x768x75Data */
+ {Panel1024x768x75,0x0019,0x0000,13}, /* XGI_StLCD1024x768x75Data */
+ {Panel1024x768x75,0x0018,0x0010,14}, /* XGI_CetLCD1024x768x75Data */
+ {Panel1280x1024x75,0x0019,0x0001,15}, /* XGI_ExtLCD1280x1024x75Data */
+ {Panel1280x1024x75,0x0019,0x0000,16}, /* XGI_StLCD1280x1024x75Data */
+ {Panel1280x1024x75,0x0018,0x0010,17}, /* XGI_CetLCD1280x1024x75Data */
+ {PanelRef75Hz,0x0008,0x0008,18}, /* XGI_NoScalingDatax75 */
+ {0xFF,0x0000,0x0000,0} /* End of table */
+};
+
+XGI330_LCDDataTablStruct XGI_LCDDesDataTable[]=
+{
+ {Panel1024x768,0x0019,0x0001,0}, /* XGI_ExtLCDDes1024x768Data */
+ {Panel1024x768,0x0019,0x0000,1}, /* XGI_StLCDDes1024x768Data */
+ {Panel1024x768,0x0018,0x0010,2}, /* XGI_CetLCDDes1024x768Data */
+ {Panel1280x1024,0x0019,0x0001,3}, /* XGI_ExtLCDDes1280x1024Data */
+ {Panel1280x1024,0x0019,0x0000,4}, /* XGI_StLCDDes1280x1024Data */
+ {Panel1280x1024,0x0018,0x0010,5}, /* XGI_CetLCDDes1280x1024Data */
+ {Panel1400x1050,0x0019,0x0001,6}, /* XGI_ExtLCDDes1400x1050Data */
+ {Panel1400x1050,0x0019,0x0000,7}, /* XGI_StLCDDes1400x1050Data */
+ {Panel1400x1050,0x0418,0x0010,8}, /* XGI_CetLCDDes1400x1050Data */
+ {Panel1400x1050,0x0418,0x0410,9}, /* XGI_CetLCDDes1400x1050Data2 */
+ {Panel1600x1200,0x0019,0x0001,10}, /* XGI_ExtLCDDes1600x1200Data */
+ {Panel1600x1200,0x0019,0x0000,11}, /* XGI_StLCDDes1600x1200Data */
+ {PanelRef60Hz,0x0008,0x0008,12}, /* XGI_NoScalingDesData */
+ {Panel1024x768x75,0x0019,0x0001,13}, /* XGI_ExtLCDDes1024x768x75Data */
+ {Panel1024x768x75,0x0019,0x0000,14}, /* XGI_StLCDDes1024x768x75Data */
+ {Panel1024x768x75,0x0018,0x0010,15}, /* XGI_CetLCDDes1024x768x75Data */
+ {Panel1280x1024x75,0x0019,0x0001,16}, /* XGI_ExtLCDDes1280x1024x75Data */
+ {Panel1280x1024x75,0x0019,0x0000,17}, /* XGI_StLCDDes1280x1024x75Data */
+ {Panel1280x1024x75,0x0018,0x0010,18}, /* XGI_CetLCDDes1280x1024x75Data */
+ {PanelRef75Hz,0x0008,0x0008,19}, /* XGI_NoScalingDesDatax75 */
+ {0xFF,0x0000,0x0000,0}
+};
+
+XGI330_LCDDataTablStruct XGI_EPLLCDCRT1Ptr_H[]=
+{
+ {Panel1024x768,0x0018,0x0000,0}, /* XGI_LVDSCRT11024x768_1_H */
+ {Panel1024x768,0x0018,0x0010,1}, /* XGI_LVDSCRT11024x768_2_H */
+ {Panel1280x1024,0x0018,0x0000,2}, /* XGI_LVDSCRT11280x1024_1_H */
+ {Panel1280x1024,0x0018,0x0010,3}, /* XGI_LVDSCRT11280x1024_2_H */
+ {Panel1400x1050,0x0018,0x0000,4}, /* XGI_LVDSCRT11400x1050_1_H */
+ {Panel1400x1050,0x0018,0x0010,5}, /* XGI_LVDSCRT11400x1050_2_H */
+ {Panel1600x1200,0x0018,0x0000,6}, /* XGI_LVDSCRT11600x1200_1_H */
+ {Panel1024x768x75,0x0018,0x0000,7}, /* XGI_LVDSCRT11024x768_1_Hx75 */
+ {Panel1024x768x75,0x0018,0x0010,8}, /* XGI_LVDSCRT11024x768_2_Hx75 */
+ {Panel1280x1024x75,0x0018,0x0000,9}, /* XGI_LVDSCRT11280x1024_1_Hx75 */
+ {Panel1280x1024x75,0x0018,0x0010,10}, /* XGI_LVDSCRT11280x1024_2_Hx75 */
+ {0xFF,0x0000,0x0000,0}
+};
+
+XGI330_LCDDataTablStruct XGI_EPLLCDCRT1Ptr_V[]=
+{
+ {Panel1024x768,0x0018,0x0000,0}, /* XGI_LVDSCRT11024x768_1_V */
+ {Panel1024x768,0x0018,0x0010,1}, /* XGI_LVDSCRT11024x768_2_V */
+ {Panel1280x1024,0x0018,0x0000,2}, /* XGI_LVDSCRT11280x1024_1_V */
+ {Panel1280x1024,0x0018,0x0010,3}, /* XGI_LVDSCRT11280x1024_2_V */
+ {Panel1400x1050,0x0018,0x0000,4}, /* XGI_LVDSCRT11400x1050_1_V */
+ {Panel1400x1050,0x0018,0x0010,5}, /* XGI_LVDSCRT11400x1050_2_V */
+ {Panel1600x1200,0x0018,0x0000,6}, /* XGI_LVDSCRT11600x1200_1_V */
+ {Panel1024x768x75,0x0018,0x0000,7}, /* XGI_LVDSCRT11024x768_1_Vx75 */
+ {Panel1024x768x75,0x0018,0x0010,8}, /* XGI_LVDSCRT11024x768_2_Vx75 */
+ {Panel1280x1024x75,0x0018,0x0000,9}, /* XGI_LVDSCRT11280x1024_1_Vx75 */
+ {Panel1280x1024x75,0x0018,0x0010,10}, /* XGI_LVDSCRT11280x1024_2_Vx75 */
+ {0xFF,0x0000,0x0000,0}
+};
+
+XGI330_LCDDataTablStruct XGI_EPLLCDDataPtr[]=
+{
+ {Panel1024x768,0x0018,0x0000,0}, /* XGI_LVDS1024x768Data_1 */
+ {Panel1024x768,0x0018,0x0010,1}, /* XGI_LVDS1024x768Data_2 */
+ {Panel1280x1024,0x0018,0x0000,2}, /* XGI_LVDS1280x1024Data_1 */
+ {Panel1280x1024,0x0018,0x0010,3}, /* XGI_LVDS1280x1024Data_2 */
+ {Panel1400x1050,0x0018,0x0000,4}, /* XGI_LVDS1400x1050Data_1 */
+ {Panel1400x1050,0x0018,0x0010,5}, /* XGI_LVDS1400x1050Data_2 */
+ {Panel1600x1200,0x0018,0x0000,6}, /* XGI_LVDS1600x1200Data_1 */
+ {PanelRef60Hz,0x0008,0x0008,7}, /* XGI_LVDSNoScalingData */
+ {Panel1024x768x75,0x0018,0x0000,8}, /* XGI_LVDS1024x768Data_1x75 */
+ {Panel1024x768x75,0x0018,0x0010,9}, /* XGI_LVDS1024x768Data_2x75 */
+ {Panel1280x1024x75,0x0018,0x0000,10}, /* XGI_LVDS1280x1024Data_1x75 */
+ {Panel1280x1024x75,0x0018,0x0010,11}, /* XGI_LVDS1280x1024Data_2x75 */
+ {PanelRef75Hz,0x0008,0x0008,12}, /* XGI_LVDSNoScalingDatax75 */
+ {0xFF,0x0000,0x0000,0}
+};
+
+XGI330_LCDDataTablStruct XGI_EPLLCDDesDataPtr[]=
+{
+ {Panel1024x768,0x0018,0x0000,0}, /* XGI_LVDS1024x768Des_1 */
+ {Panel1024x768,0x0618,0x0410,1}, /* XGI_LVDS1024x768Des_3 */
+ {Panel1024x768,0x0018,0x0010,2}, /* XGI_LVDS1024x768Des_2 */
+ {Panel1280x1024,0x0018,0x0000,3}, /* XGI_LVDS1280x1024Des_1 */
+ {Panel1280x1024,0x0018,0x0010,4}, /* XGI_LVDS1280x1024Des_2 */
+ {Panel1400x1050,0x0018,0x0000,5}, /* XGI_LVDS1400x1050Des_1 */
+ {Panel1400x1050,0x0018,0x0010,6}, /* XGI_LVDS1400x1050Des_2 */
+ {Panel1600x1200,0x0018,0x0000,7}, /* XGI_LVDS1600x1200Des_1 */
+ {PanelRef60Hz,0x0008,0x0008,8}, /* XGI_LVDSNoScalingDesData */
+ {Panel1024x768x75,0x0018,0x0000,9}, /* XGI_LVDS1024x768Des_1x75 */
+ {Panel1024x768x75,0x0618,0x0410,10}, /* XGI_LVDS1024x768Des_3x75 */
+ {Panel1024x768x75,0x0018,0x0010,11}, /* XGI_LVDS1024x768Des_2x75 */
+ {Panel1280x1024x75,0x0018,0x0000,12}, /* XGI_LVDS1280x1024Des_1x75 */
+ {Panel1280x1024x75,0x0018,0x0010,13}, /* XGI_LVDS1280x1024Des_2x75 */
+ {PanelRef75Hz,0x0008,0x0008,14}, /* XGI_LVDSNoScalingDesDatax75 */
+ {0xFF,0x0000,0x0000,0}
+};
+
+XGI330_LCDDataTablStruct XGI_EPLCHLCDRegPtr[]=
+{
+ {Panel1024x768,0x0000,0x0000,0}, /* XGI_CH7017LV1024x768 */
+ {Panel1400x1050,0x0000,0x0000,1}, /* XGI_CH7017LV1400x1050 */
+ {0xFF,0x0000,0x0000,0}
+};
+
+XGI330_TVDataTablStruct XGI_TVDataTable[]=
+{
+ {0x09E1,0x0001,0}, /* XGI_ExtPALData */
+ {0x09E1,0x0000,1}, /* XGI_ExtNTSCData */
+ {0x09E1,0x0801,2}, /* XGI_StPALData */
+ {0x09E1,0x0800,3}, /* XGI_StNTSCData */
+ {0x49E0,0x0100,4}, /* XGI_ExtHiTVData */
+ {0x49E0,0x4100,5}, /* XGI_St2HiTVData */
+ {0x49E0,0x4900,13}, /* XGI_St1HiTVData */
+ {0x09E0,0x0020,6}, /* XGI_ExtYPbPr525iData */
+ {0x09E0,0x0040,7}, /* XGI_ExtYPbPr525pData */
+ {0x09E0,0x0080,8}, /* XGI_ExtYPbPr750pData */
+ {0x09E0,0x0820,9}, /* XGI_StYPbPr525iData */
+ {0x09E0,0x0840,10}, /* XGI_StYPbPr525pData */
+ {0x09E0,0x0880,11}, /* XGI_StYPbPr750pData */
+ {0xffff,0x0000,12} /* END */
+};
+
+USHORT TVLenList[]=
+{
+ LVDSCRT1Len_H,
+ LVDSCRT1Len_V,
+ LVDSDataLen,
+ 0,
+ TVDataLen,
+ 0,
+ 0,
+ CHTVRegLen
+} ;
+
+/* Chrontel 7017 TV CRT1 Timing List */
+XGI330_TVDataTablStruct XGI_EPLCHTVCRT1Ptr[]=
+{
+ {0x0011,0x0000,0}, /* XGI_CHTVCRT1UNTSC */
+ {0x0011,0x0010,1}, /* XGI_CHTVCRT1ONTSC */
+ {0x0011,0x0001,2}, /* XGI_CHTVCRT1UPAL */
+ {0x0011,0x0011,3}, /* XGI_CHTVCRT1OPAL */
+ {0xFFFF,0x0000,4}
+};
+
+/* ;;Chrontel 7017 TV Timing List */
+XGI330_TVDataTablStruct XGI_EPLCHTVDataPtr[]=
+{
+ {0x0011,0x0000,0}, /* XGI_CHTVUNTSCData */
+ {0x0011,0x0010,1}, /* XGI_CHTVONTSCData */
+ {0x0011,0x0001,2}, /* XGI_CHTVUPALData */
+ {0x0011,0x0011,3}, /* XGI_CHTVOPALData */
+ {0xFFFF,0x0000,4}
+};
+
+/* ;;Chrontel 7017 TV Reg. List */
+XGI330_TVDataTablStruct XGI_EPLCHTVRegPtr[]=
+{
+ {0x0011,0x0000,0}, /* XGI_CHTVRegUNTSC */
+ {0x0011,0x0010,1}, /* XGI_CHTVRegONTSC */
+ {0x0011,0x0001,2}, /* XGI_CHTVRegUPAL */
+ {0x0011,0x0011,3}, /* XGI_CHTVRegOPAL */
+ {0xFFFF,0x0000,4}
+};
+
+USHORT LCDLenList[]=
+{
+ LVDSCRT1Len_H,
+ LVDSCRT1Len_V,
+ LVDSDataLen,
+ LCDDesDataLen,
+ LCDDataLen,
+ LCDDesDataLen,
+ 0,
+ LCDDesDataLen,
+ LCDDesDataLen,
+ 0
+} ;
+
+XGI330_LCDCapStruct XGI660_LCDDLCapList[]= /* 660, Dual link */
+{
+/* LCDCap1024x768 */
+ {Panel1024x768, DefaultLCDCap, 0, 0x014, 0x88, 0x06, VCLK65,
+ 0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024 */
+ {Panel1280x1024, LCDDualLink+DefaultLCDCap, StLCDBToA, 0x053, 0x70, 0x03, VCLK108_2,
+ 0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1400x1050 */
+ {Panel1400x1050, LCDDualLink+DefaultLCDCap, StLCDBToA, 0x053, 0x70, 0x03, VCLK108_2,
+ 0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1600x1200 */
+ {Panel1600x1200, LCDDualLink+DefaultLCDCap, LCDToFull, 0x053, 0xC0, 0x03, VCLK162,
+ 0x43, 0x22, 0x70, 0x24, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1024x768x75 */
+ {Panel1024x768x75, DefaultLCDCap, 0, 0x014, 0x60, 0, VCLK78_75,
+ 0x2B, 0x61, 0x2B, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024x75 */
+ {Panel1280x1024x75, LCDDualLink+DefaultLCDCap, StLCDBToA, 0x053, 0x90, 0x03, VCLK135_5,
+ 0x54, 0x42, 0x4A, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCapDefault */
+ {0xFF, DefaultLCDCap, 0, 0x053, 0x88, 0x06, VCLK65,
+ 0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10}
+};
+
+XGI330_LCDCapStruct XGI_LCDDLCapList[]= /* Dual link only */
+{
+/* LCDCap1024x768 */
+ {Panel1024x768, DefaultLCDCap, 0, 0x012, 0x88, 0x06, VCLK65,
+ 0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024 */
+ {Panel1280x1024, LCDDualLink+DefaultLCDCap, StLCDBToA, 0x012, 0x70, 0x03, VCLK108_2,
+ 0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1400x1050 */
+ {Panel1400x1050, LCDDualLink+DefaultLCDCap, StLCDBToA, 0x012, 0x70, 0x03, VCLK108_2,
+ 0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1600x1200 */
+ {Panel1600x1200, LCDDualLink+DefaultLCDCap, LCDToFull, 0x012, 0xC0, 0x03, VCLK162,
+ 0x43, 0x22, 0x70, 0x24, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1024x768x75 */
+ {Panel1024x768x75, DefaultLCDCap, 0, 0x012, 0x60, 0, VCLK78_75,
+ 0x2B, 0x61, 0x2B, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024x75 */
+ {Panel1280x1024x75, LCDDualLink+DefaultLCDCap, StLCDBToA, 0x012, 0x90, 0x03, VCLK135_5,
+ 0x54, 0x42, 0x4A, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCapDefault */
+ {0xFF, DefaultLCDCap, 0, 0x012, 0x88, 0x06, VCLK65,
+ 0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10}
+};
+
+XGI330_LCDCapStruct XGI660_LCDCapList[]=
+{
+/* LCDCap1024x768 */
+ {Panel1024x768, DefaultLCDCap, 0, 0x014, 0x88, 0x06, VCLK65,
+ 0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024 */
+ {Panel1280x1024, DefaultLCDCap, StLCDBToA, 0x053, 0x70, 0x03, VCLK108_2,
+ 0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1400x1050 */
+ {Panel1400x1050, DefaultLCDCap, StLCDBToA, 0x053, 0x70, 0x03, VCLK108_2,
+ 0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1600x1200 */
+ {Panel1600x1200, DefaultLCDCap, LCDToFull, 0x053, 0xC0, 0x03, VCLK162,
+ 0x5A, 0x23, 0x5A, 0x23, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1024x768x75 */
+ {Panel1024x768x75, DefaultLCDCap, 0, 0x014, 0x60, 0, VCLK78_75,
+ 0x2B, 0x61, 0x2B, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024x75 */
+ {Panel1280x1024x75,+DefaultLCDCap, StLCDBToA, 0x053, 0x90, 0x03, VCLK135_5,
+ 0x54, 0x42, 0x4A, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCapDefault */
+ {0xFF, DefaultLCDCap, 0, 0x053, 0x88, 0x06, VCLK65,
+ 0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10}
+};
+
+XGI330_LCDCapStruct XGI_LCDCapList[]=
+{
+/* LCDCap1024x768 */
+ {Panel1024x768, DefaultLCDCap, 0, 0x012, 0x88, 0x06, VCLK65,
+ 0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024 */
+ {Panel1280x1024, DefaultLCDCap, StLCDBToA, 0x012, 0x70, 0x03, VCLK108_2,
+ 0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1400x1050 */
+ {Panel1400x1050, DefaultLCDCap, StLCDBToA, 0x012, 0x70, 0x03, VCLK108_2,
+ 0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1600x1200 */
+ {Panel1600x1200, DefaultLCDCap, LCDToFull, 0x012, 0xC0, 0x03, VCLK162,
+ 0x5A, 0x23, 0x5A, 0x23, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1024x768x75 */
+ {Panel1024x768x75, DefaultLCDCap, 0, 0x012, 0x60, 0, VCLK78_75,
+ 0x2B, 0x61, 0x2B, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024x75 */
+ {Panel1280x1024x75, DefaultLCDCap, StLCDBToA, 0x012, 0x90, 0x03, VCLK135_5,
+ 0x54, 0x42, 0x4A, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCapDefault */
+ {0xFF, DefaultLCDCap, 0, 0x012, 0x88, 0x06, VCLK65,
+ 0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+ 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10}
+};
+
+XGI21_LVDSCapStruct XGI21_LCDCapList[]=
+{
+ {DisableLCD24bpp + LCDPolarity,
+ 2160,1250,1600,1200, 64, 1, 192, 3,
+ 0x70,0x24,0x20,0x04,0x0A,0x02,0xC8
+ },
+ {DisableLCD24bpp + LCDPolarity,
+ 1688,1066,1280,1024, 48, 1, 112, 3,
+ 0x70,0x44,0x20,0x04,0x0A,0x02,0xC8
+ },
+ {DisableLCD24bpp + LCDPolarity + (LCDPolarity << 8),
+ 1344, 806,1024, 768, 24, 3, 136, 6,
+ 0x6C,0x65,0x20,0x04,0x0A,0x02,0xC8
+ },
+ {DisableLCD24bpp + LCDPolarity,
+ 1056, 628, 800, 600, 40, 1, 128, 4,
+ 0x42,0xE2,0x20,0x14,0x0A,0x02,0x00
+ },
+ {DisableLCD24bpp + LCDPolarity,
+ 928, 525, 800, 480, 40, 13, 48, 3,
+ 0x52,0xC5,0x20,0x14,0x0A,0x02,0x00
+ },
+ {DisableLCD24bpp + LCDPolarity + (LCDPolarity << 8),
+ 800, 525, 640, 480, 16, 10, 96, 2,
+ 0x1B,0xE1,0x20,0x04,0x0A,0x02,0xC8
+ }
+
+};
+
+XGI_Ext2Struct XGI330_RefIndex[]=
+{
+{Support32Bpp + SupportAllCRT2 + SyncPN, RES320x200, VCLK25_175, 0x00,0x10,0x59, 320, 200},/* 00 */
+{Support32Bpp + SupportAllCRT2 + SyncPN, RES320x200, VCLK25_175, 0x00,0x10,0x00, 320, 400},/* 01 */
+{Support32Bpp + SupportAllCRT2 + SyncNN, RES320x240, VCLK25_175, 0x04,0x20,0x50, 320, 240},/* 02 */
+{Support32Bpp + SupportAllCRT2 + SyncPP, RES400x300, VCLK40, 0x05,0x32,0x51, 400, 300},/* 03 */
+{Support32Bpp + NoSupportTV + SyncNN + SupportTV1024, RES512x384, VCLK65, 0x06,0x43,0x52, 512, 384},/* 04 */
+{Support32Bpp + SupportAllCRT2 + SyncPN, RES640x400, VCLK25_175, 0x00,0x14,0x2f, 640, 400},/* 05 */
+{Support32Bpp + SupportAllCRT2 + SyncNN, RES640x480x60, VCLK25_175, 0x04,0x24,0x2e, 640, 480},/* 06 640x480x60Hz (LCD 640x480x60z) */
+{Support32Bpp + NoSupportHiVisionTV + SyncNN, RES640x480x72, VCLK31_5, 0x04,0x24,0x2e, 640, 480},/* 07 640x480x72Hz (LCD 640x480x70Hz) */
+{Support32Bpp + NoSupportHiVisionTV + SyncNN, RES640x480x75, VCLK31_5, 0x47,0x24,0x2e, 640, 480},/* 08 640x480x75Hz (LCD 640x480x75Hz) */
+{Support32Bpp + SupportRAMDAC2 + SyncNN, RES640x480x85, VCLK36, 0x8A,0x24,0x2e, 640, 480},/* 09 640x480x85Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN, RES640x480x100, VCLK43_163, 0x00,0x24,0x2e, 640, 480},/* 0a 640x480x100Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN, RES640x480x120, VCLK52_406, 0x00,0x24,0x2e, 640, 480},/* 0b 640x480x120Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN, RES640x480x160, VCLK72_852, 0x00,0x24,0x2e, 640, 480},/* 0c 640x480x160Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncNN, RES640x480x200, VCLK86_6, 0x00,0x24,0x2e, 640, 480},/* 0d 640x480x200Hz */
+{Support32Bpp + NoSupportLCD + SyncPP, RES800x600x56, VCLK36, 0x05,0x36,0x6a, 800, 600},/* 0e 800x600x56Hz */
+{Support32Bpp + NoSupportTV + SyncPP, RES800x600x60, VCLK40, 0x05,0x36,0x6a, 800, 600},/* 0f 800x600x60Hz (LCD 800x600x60Hz) */
+{Support32Bpp + NoSupportHiVisionTV + SyncPP, RES800x600x72, VCLK50, 0x48,0x36,0x6a, 800, 600},/* 10 800x600x72Hz (LCD 800x600x70Hz) */
+{Support32Bpp + NoSupportHiVisionTV + SyncPP, RES800x600x75, VCLK49_5, 0x8B,0x36,0x6a, 800, 600},/* 11 800x600x75Hz (LCD 800x600x75Hz) */
+{Support32Bpp + SupportRAMDAC2 + SyncPP, RES800x600x85, VCLK56_25, 0x00,0x36,0x6a, 800, 600},/* 12 800x600x85Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN, RES800x600x100, VCLK68_179, 0x00,0x36,0x6a, 800, 600},/* 13 800x600x100Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN, RES800x600x120, VCLK83_95, 0x00,0x36,0x6a, 800, 600},/* 14 800x600x120Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN, RES800x600x160, VCLK116_406,0x00,0x36,0x6a, 800, 600},/* 15 800x600x160Hz */
+{Support32Bpp + InterlaceMode + SyncPP, RES1024x768x43, VCLK44_9, 0x00,0x47,0x37,1024, 768},/* 16 1024x768x43Hz */
+{Support32Bpp + NoSupportTV + SyncNN + SupportTV1024, RES1024x768x60, VCLK65, 0x06,0x47,0x37,1024, 768},/* 17 1024x768x60Hz (LCD 1024x768x60Hz) */
+{Support32Bpp + NoSupportHiVisionTV + SyncNN, RES1024x768x70, VCLK75, 0x49,0x47,0x37,1024, 768},/* 18 1024x768x70Hz (LCD 1024x768x70Hz) */
+{Support32Bpp + NoSupportHiVisionTV + SyncPP, RES1024x768x75, VCLK78_75, 0x00,0x47,0x37,1024, 768},/* 19 1024x768x75Hz (LCD 1024x768x75Hz) */
+{Support32Bpp + SupportRAMDAC2 + SyncPP, RES1024x768x85, VCLK94_5, 0x8C,0x47,0x37,1024, 768},/* 1a 1024x768x85Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN, RES1024x768x100, VCLK113_309,0x00,0x47,0x37,1024, 768},/* 1b 1024x768x100Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN, RES1024x768x120, VCLK139_054,0x00,0x47,0x37,1024, 768},/* 1c 1024x768x120Hz */
+{Support32Bpp + SupportLCD + SyncPP, RES1280x960x60, VCLK108_2, 0x08,0x58,0x7b,1280, 960},/* 1d 1280x960x60Hz */
+{Support32Bpp + InterlaceMode + SyncPP, RES1280x1024x43, VCLK78_75, 0x00,0x58,0x3a,1280,1024},/* 1e 1280x1024x43Hz */
+{Support32Bpp + NoSupportTV + SyncPP, RES1280x1024x60, VCLK108_2, 0x07,0x58,0x3a,1280,1024},/* 1f 1280x1024x60Hz (LCD 1280x1024x60Hz) */
+{Support32Bpp + NoSupportTV + SyncPP, RES1280x1024x75, VCLK135_5, 0x00,0x58,0x3a,1280,1024},/* 20 1280x1024x75Hz (LCD 1280x1024x75Hz) */
+{Support32Bpp + SyncPP, RES1280x1024x85, VCLK157_5, 0x00,0x58,0x3a,1280,1024},/* 21 1280x1024x85Hz */
+{Support32Bpp + SupportLCD + SyncPP + SupportCRT2in301C, RES1600x1200x60, VCLK162, 0x09,0x7A,0x3c,1600,1200},/* 22 1600x1200x60Hz */
+{Support32Bpp + SyncPP + SupportCRT2in301C, RES1600x1200x65, VCLK175, 0x00,0x69,0x3c,1600,1200},/* 23 1600x1200x65Hz */
+{Support32Bpp + SyncPP + SupportCRT2in301C, RES1600x1200x70, VCLK189, 0x00,0x69,0x3c,1600,1200},/* 24 1600x1200x70Hz */
+{Support32Bpp + SyncPP + SupportCRT2in301C, RES1600x1200x75, VCLK202_5, 0x00,0x69,0x3c,1600,1200},/* 25 1600x1200x75Hz */
+{Support32Bpp + SyncPP, RES1600x1200x85, VCLK229_5, 0x00,0x69,0x3c,1600,1200},/* 26 1600x1200x85Hz */
+{Support32Bpp + SyncPP, RES1600x1200x100,VCLK269_655,0x00,0x69,0x3c,1600,1200},/* 27 1600x1200x100Hz */
+{Support32Bpp + SyncPP, RES1600x1200x120,VCLK323_586,0x00,0x69,0x3c,1600,1200},/* 28 1600x1200x120Hz */
+{Support32Bpp + SupportLCD + SyncNP, RES1920x1440x60, VCLK234, 0x00,0x00,0x68,1920,1440},/* 29 1920x1440x60Hz */
+{Support32Bpp + SyncPN, RES1920x1440x65, VCLK254_817,0x00,0x00,0x68,1920,1440},/* 2a 1920x1440x65Hz */
+{Support32Bpp + SyncPN, RES1920x1440x70, VCLK277_015,0x00,0x00,0x68,1920,1440},/* 2b 1920x1440x70Hz */
+{Support32Bpp + SyncPN, RES1920x1440x75, VCLK291_132,0x00,0x00,0x68,1920,1440},/* 2c 1920x1440x75Hz */
+{Support32Bpp + SyncPN, RES1920x1440x85, VCLK330_615,0x00,0x00,0x68,1920,1440},/* 2d 1920x1440x85Hz */
+{Support16Bpp + SyncPN, RES1920x1440x100,VCLK388_631,0x00,0x00,0x68,1920,1440},/* 2e 1920x1440x100Hz */
+{Support32Bpp + SupportLCD + SyncPN, RES2048x1536x60, VCLK266_952,0x00,0x00,0x6c,2048,1536},/* 2f 2048x1536x60Hz */
+{Support32Bpp + SyncPN, RES2048x1536x65, VCLK291_766,0x00,0x00,0x6c,2048,1536},/* 30 2048x1536x65Hz */
+{Support32Bpp + SyncPN, RES2048x1536x70, VCLK315_195,0x00,0x00,0x6c,2048,1536},/* 31 2048x1536x70Hz */
+{Support32Bpp + SyncPN, RES2048x1536x75, VCLK340_477,0x00,0x00,0x6c,2048,1536},/* 32 2048x1536x75Hz */
+{Support16Bpp + SyncPN, RES2048x1536x85, VCLK375_847,0x00,0x00,0x6c,2048,1536},/* 33 2048x1536x85Hz */
+{Support32Bpp + SupportHiVisionTV + SupportRAMDAC2 + SyncPP + SupportYPbPr, RES800x480x60, VCLK39_77, 0x08,0x00,0x70, 800, 480},/* 34 800x480x60Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP, RES800x480x75, VCLK49_5, 0x08,0x00,0x70, 800, 480},/* 35 800x480x75Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP, RES800x480x85, VCLK56_25, 0x08,0x00,0x70, 800, 480},/* 36 800x480x85Hz */
+{Support32Bpp + SupportHiVisionTV + SupportRAMDAC2 + SyncPP + SupportYPbPr, RES1024x576x60, VCLK65, 0x09,0x00,0x71,1024, 576},/* 37 1024x576x60Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP, RES1024x576x75, VCLK78_75, 0x09,0x00,0x71,1024, 576},/* 38 1024x576x75Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP, RES1024x576x85, VCLK94_5, 0x09,0x00,0x71,1024, 576},/* 39 1024x576x85Hz */
+{Support32Bpp + SupportHiVisionTV + SupportRAMDAC2 + SyncPP + SupportYPbPr, RES1280x720x60, VCLK108_2, 0x0A,0x00,0x75,1280, 720},/* 3a 1280x720x60Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP, RES1280x720x75, VCLK135_5, 0x0A,0x00,0x75,1280, 720},/* 3b 1280x720x75Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP, RES1280x720x85, VCLK157_5, 0x0A,0x00,0x75,1280, 720},/* 3c 1280x720x85Hz */
+{Support32Bpp + SupportTV + SyncNN, RES720x480x60, VCLK28_322, 0x06,0x00,0x31, 720, 480},/* 3d 720x480x60Hz */
+{Support32Bpp + SupportTV + SyncPP, RES720x576x56, VCLK36, 0x06,0x00,0x32, 720, 576},/* 3e 720x576x56Hz */
+{Support32Bpp + InterlaceMode + NoSupportLCD + SyncPP, RES856x480x79I, VCLK35_2, 0x00,0x00,0x00, 856, 480},/* 3f 856x480x79I */
+{Support32Bpp + NoSupportLCD + SyncNN, RES856x480x60, VCLK35_2, 0x00,0x00,0x00, 856, 480},/* 40 856x480x60Hz */
+{Support32Bpp + NoSupportHiVisionTV + SyncPP, RES1280x768x60, VCLK79_411, 0x08,0x48,0x23,1280, 768},/* 41 1280x768x60Hz */
+{Support32Bpp + NoSupportHiVisionTV + SyncPP, RES1400x1050x60, VCLK122_61, 0x08,0x69,0x26,1400,1050},/* 42 1400x1050x60Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP, RES1152x864x60, VCLK80_350, 0x37,0x00,0x20,1152, 864},/* 43 1152x864x60Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP, RES1152x864x75, VCLK107_385,0x37,0x00,0x20,1152, 864},/* 44 1152x864x75Hz */
+{Support32Bpp + SupportLCD + SupportRAMDAC2 + SyncPP, RES1280x960x75, VCLK125_999,0x3A,0x88,0x7b,1280, 960},/* 45 1280x960x75Hz */
+{Support32Bpp + SupportLCD + SupportRAMDAC2 + SyncPP, RES1280x960x85, VCLK148_5, 0x0A,0x88,0x7b,1280, 960},/* 46 1280x960x85Hz */
+{Support32Bpp + SupportLCD + SupportRAMDAC2 + SyncPP, RES1280x960x120, VCLK217_325,0x3A,0x88,0x7b,1280, 960},/* 47 1280x960x120Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN, RES1024x768x160, VCLK139_054,0x30,0x47,0x37,1024, 768},/* 48 1024x768x160Hz */
+};
+
+
+
+XGI330_VCLKDataStruct XGI330_VCLKData[]=
+{
+ { 0x1b,0xe1, 25}, /* 0x0 */
+ { 0x4e,0xe4, 28}, /* 0x1 */
+ { 0x57,0xe4, 31}, /* 0x2 */
+ { 0xc3,0xc8, 36}, /* 0x3 */
+ { 0x42,0xe2, 40}, /* 0x4 */
+ { 0xfe,0xcd, 43}, /* 0x5 */
+ { 0x5d,0xc4, 44}, /* 0x6 */
+ { 0x52,0xe2, 49}, /* 0x7 */
+ { 0x53,0xe2, 50}, /* 0x8 */
+ { 0x74,0x67, 52}, /* 0x9 */
+ { 0x6d,0x66, 56}, /* 0xa */
+ { 0x6c,0xc3, 65}, /* 0xb */
+ { 0x46,0x44, 67}, /* 0xc */
+ { 0xb1,0x46, 68}, /* 0xd */
+ { 0xd3,0x4a, 72}, /* 0xe */
+ { 0x29,0x61, 75}, /* 0xf */
+ { 0x6e,0x46, 76}, /* 0x10 */
+ { 0x2b,0x61, 78}, /* 0x11 */
+ { 0x31,0x42, 79}, /* 0x12 */
+ { 0xab,0x44, 83}, /* 0x13 */
+ { 0x46,0x25, 84}, /* 0x14 */
+ { 0x78,0x29, 86}, /* 0x15 */
+ { 0x62,0x44, 94}, /* 0x16 */
+ { 0x2b,0x41,104}, /* 0x17 */
+ { 0x3a,0x23,105}, /* 0x18 */
+ { 0x70,0x44,108}, /* 0x19 */
+ { 0x3c,0x23,109}, /* 0x1a */
+ { 0x5e,0x43,113}, /* 0x1b */
+ { 0xbc,0x44,116}, /* 0x1c */
+ { 0xe0,0x46,132}, /* 0x1d */
+ { 0x54,0x42,135}, /* 0x1e */
+ { 0xea,0x2a,139}, /* 0x1f */
+ { 0x41,0x22,157}, /* 0x20 */
+ { 0x70,0x24,162}, /* 0x21 */
+ { 0x30,0x21,175}, /* 0x22 */
+ { 0x4e,0x22,189}, /* 0x23 */
+ { 0xde,0x26,194}, /* 0x24 */
+ { 0x62,0x06,202}, /* 0x25 */
+ { 0x3f,0x03,229}, /* 0x26 */
+ { 0xb8,0x06,234}, /* 0x27 */
+ { 0x34,0x02,253}, /* 0x28 */
+ { 0x58,0x04,255}, /* 0x29 */
+ { 0x24,0x01,265}, /* 0x2a */
+ { 0x9b,0x02,267}, /* 0x2b */
+ { 0x70,0x05,270}, /* 0x2c */
+ { 0x25,0x01,272}, /* 0x2d */
+ { 0x9c,0x02,277}, /* 0x2e */
+ { 0x27,0x01,286}, /* 0x2f */
+ { 0x3c,0x02,291}, /* 0x30 */
+ { 0xef,0x0a,292}, /* 0x31 */
+ { 0xf6,0x0a,310}, /* 0x32 */
+ { 0x95,0x01,315}, /* 0x33 */
+ { 0xf0,0x09,324}, /* 0x34 */
+ { 0xfe,0x0a,331}, /* 0x35 */
+ { 0xf3,0x09,332}, /* 0x36 */
+ { 0xea,0x08,340}, /* 0x37 */
+ { 0xe8,0x07,376}, /* 0x38 */
+ { 0xde,0x06,389}, /* 0x39 */
+ { 0x52,0x2a, 54}, /* 0x3a */
+ { 0x52,0x6a, 27}, /* 0x3b */
+ { 0x62,0x24, 70}, /* 0x3c */
+ { 0x62,0x64, 70}, /* 0x3d */
+ { 0xa8,0x4c, 30}, /* 0x3e */
+ { 0x20,0x26, 33}, /* 0x3f */
+ { 0x31,0xc2, 39}, /* 0x40 */
+ { 0x60,0x36, 30}, /* 0x41 */
+ { 0x40,0x4A, 28}, /* 0x42 */
+ { 0x9F,0x46, 44}, /* 0x43 */
+ { 0x97,0x2C, 26}, /* 0x44 */
+ { 0x44,0xE4, 25}, /* 0x45 */
+ { 0x7E,0x32, 47}, /* 0x46 */
+ { 0x08,0x24, 31}, /* 0x47 */
+ { 0x97,0x2c, 26}, /* 0x48 */
+ { 0xCE,0x3c, 39}, /* 0x49 */
+ { 0x52,0x4A, 36}, /* 0x4a */
+ { 0x2C,0x61, 95}, /* 0x4b */
+ { 0x78,0x27,108}, /* 0x4c */
+ { 0x66,0x43,123}, /* 0x4d */
+ { 0x2c,0x61, 80}, /* 0x4e */
+ { 0x3b,0x61,108} /* 0x4f */
+};
+
+XGI_VBVCLKDataStruct XGI330_VBVCLKData[]=
+{
+ { 0x1b,0xe1, 25}, /* 0x0 */
+ { 0x4e,0xe4, 28}, /* 0x1 */
+ { 0x57,0xe4, 31}, /* 0x2 */
+ { 0xc3,0xc8, 36}, /* 0x3 */
+ { 0x42,0x47, 40}, /* 0x4 */
+ { 0xfe,0xcd, 43}, /* 0x5 */
+ { 0x5d,0xc4, 44}, /* 0x6 */
+ { 0x52,0x47, 49}, /* 0x7 */
+ { 0x53,0x47, 50}, /* 0x8 */
+ { 0x74,0x67, 52}, /* 0x9 */
+ { 0x6d,0x66, 56}, /* 0xa */
+ { 0x5a,0x64, 65}, /* 0xb */
+ { 0x46,0x44, 67}, /* 0xc */
+ { 0xb1,0x46, 68}, /* 0xd */
+ { 0xd3,0x4a, 72}, /* 0xe */
+ { 0x29,0x61, 75}, /* 0xf */
+ { 0x6d,0x46, 75}, /* 0x10 */
+ { 0x41,0x43, 78}, /* 0x11 */
+ { 0x31,0x42, 79}, /* 0x12 */
+ { 0xab,0x44, 83}, /* 0x13 */
+ { 0x46,0x25, 84}, /* 0x14 */
+ { 0x78,0x29, 86}, /* 0x15 */
+ { 0x62,0x44, 94}, /* 0x16 */
+ { 0x2b,0x22,104}, /* 0x17 */
+ { 0x49,0x24,105}, /* 0x18 */
+ { 0xf8,0x2f,108}, /* 0x19 */
+ { 0x3c,0x23,109}, /* 0x1a */
+ { 0x5e,0x43,113}, /* 0x1b */
+ { 0xbc,0x44,116}, /* 0x1c */
+ { 0xe0,0x46,132}, /* 0x1d */
+ { 0xd4,0x28,135}, /* 0x1e */
+ { 0xea,0x2a,139}, /* 0x1f */
+ { 0x41,0x22,157}, /* 0x20 */
+ { 0x70,0x24,162}, /* 0x21 */
+ { 0x30,0x21,175}, /* 0x22 */
+ { 0x4e,0x22,189}, /* 0x23 */
+ { 0xde,0x26,194}, /* 0x24 */
+ { 0x70,0x07,202}, /* 0x25 */
+ { 0x3f,0x03,229}, /* 0x26 */
+ { 0xb8,0x06,234}, /* 0x27 */
+ { 0x34,0x02,253}, /* 0x28 */
+ { 0x58,0x04,255}, /* 0x29 */
+ { 0x24,0x01,265}, /* 0x2a */
+ { 0x9b,0x02,267}, /* 0x2b */
+ { 0x70,0x05,270}, /* 0x2c */
+ { 0x25,0x01,272}, /* 0x2d */
+ { 0x9c,0x02,277}, /* 0x2e */
+ { 0x27,0x01,286}, /* 0x2f */
+ { 0x3c,0x02,291}, /* 0x30 */
+ { 0xef,0x0a,292}, /* 0x31 */
+ { 0xf6,0x0a,310}, /* 0x32 */
+ { 0x95,0x01,315}, /* 0x33 */
+ { 0xf0,0x09,324}, /* 0x34 */
+ { 0xfe,0x0a,331}, /* 0x35 */
+ { 0xf3,0x09,332}, /* 0x36 */
+ { 0xea,0x08,340}, /* 0x37 */
+ { 0xe8,0x07,376}, /* 0x38 */
+ { 0xde,0x06,389}, /* 0x39 */
+ { 0x52,0x2a, 54}, /* 0x3a */
+ { 0x52,0x6a, 27}, /* 0x3b */
+ { 0x62,0x24, 70}, /* 0x3c */
+ { 0x62,0x64, 70}, /* 0x3d */
+ { 0xa8,0x4c, 30}, /* 0x3e */
+ { 0x20,0x26, 33}, /* 0x3f */
+ { 0x31,0xc2, 39}, /* 0x40 */
+ { 0x2e,0x48, 25}, /* 0x41 */
+ { 0x24,0x46, 25}, /* 0x42 */
+ { 0x26,0x64, 28}, /* 0x43 */
+ { 0x37,0x64, 40}, /* 0x44 */
+ { 0xa1,0x42,108}, /* 0x45 */
+ { 0x37,0x61,100}, /* 0x46 */
+ { 0x78,0x27,108}, /* 0x47 */
+ { 0x5e,0x64,68}, /* 0x48 chiawen for fuj1280x768*/
+ { 0x70,0x44,108}, /* 0x49 chiawen for 1400x1050*/
+};
+
+UCHAR XGI330_ScreenOffset[]={ 0x14,0x19,0x20,0x28,0x32,0x40,0x50,0x64,0x78,0x80,0x2d,0x35,0x57,0x48 };
+
+XGI_StResInfoStruct XGI330_StResInfo[]=
+{
+ { 640,400},
+ { 640,350},
+ { 720,400},
+ { 720,350},
+ { 640,480}
+};
+
+XGI_ModeResInfoStruct XGI330_ModeResInfo[]=
+{
+ { 320, 200, 8, 8},
+ { 320, 240, 8, 8},
+ { 320, 400, 8, 8},
+ { 400, 300, 8, 8},
+ { 512, 384, 8, 8},
+ { 640, 400, 8,16},
+ { 640, 480, 8,16},
+ { 800, 600, 8,16},
+ { 1024, 768, 8,16},
+ { 1280,1024, 8,16},
+ { 1600,1200, 8,16},
+ { 1920,1440, 8,16},
+ { 2048,1536, 8,16},
+ { 720, 480, 8,16},
+ { 720, 576, 8,16},
+ { 1280, 960, 8,16},
+ { 800, 480, 8,16},
+ { 1024, 576, 8,16},
+ { 1280, 720, 8,16},
+ { 856, 480, 8,16},
+ { 1280, 768, 8,16},
+ { 1400,1050, 8,16},
+ { 1152, 864, 8,16}
+};
+
+UCHAR XGI330_OutputSelect =0x40;
+UCHAR XGI330_SoftSetting = 0x30;
+UCHAR XGI330_SR07=0x18;
+UCHAR XGI330New_SR15[8][8]={
+{0x0,0x4,0x60,0x60},
+{0xf,0xf,0xf,0xf},
+{0xba,0xba,0xba,0xba},
+{0xa9,0xa9,0xac,0xac},
+{0xa0,0xa0,0xa0,0xa8},
+{0x0,0x0,0x2,0x2},
+{0x30,0x30,0x40,0x40},
+{0x0,0xa5,0xfb,0xf6}
+};
+
+UCHAR XGI330New_CR40[5][8]={
+{0x77,0x77,0x44,0x44},
+{0x77,0x77,0x44,0x44},
+{0x0,0x0,0x0,0x0},
+{0x5b,0x5b,0xab,0xab},
+{0x0,0x0,0xf0,0xf8}
+};
+
+UCHAR XGI330_CR49[]={0xaa,0x88};
+UCHAR XGI330_SR1F=0x0;
+UCHAR XGI330_SR21=0xa3;
+UCHAR XGI330_650_SR21=0xa7;
+UCHAR XGI330_SR22=0xfb;
+UCHAR XGI330_SR23=0xf6;
+UCHAR XGI330_SR24=0xd;
+
+UCHAR XGI660_SR21=0xa3;/* 2003.0312 */
+UCHAR XGI660_SR22=0xf3;/* 2003.0312 */
+
+UCHAR XGI330_LVDS_SR32=0x00; /* ynlai for 650 LVDS */
+UCHAR XGI330_LVDS_SR33=0x00; /* chiawen for 650 LVDS */
+UCHAR XGI330_650_SR31=0x40;
+UCHAR XGI330_650_SR33=0x04;
+UCHAR XGI330_CRT2Data_1_2 = 0x0;
+UCHAR XGI330_CRT2Data_4_D = 0x0;
+UCHAR XGI330_CRT2Data_4_E = 0x0;
+UCHAR XGI330_CRT2Data_4_10 = 0x80;
+USHORT XGI330_RGBSenseData = 0xd1;
+USHORT XGI330_VideoSenseData = 0xb9;
+USHORT XGI330_YCSenseData = 0xb3;
+USHORT XGI330_RGBSenseData2 = 0x0190; /*301b*/
+USHORT XGI330_VideoSenseData2 = 0x0110;
+USHORT XGI330_YCSenseData2 = 0x016B;
+UCHAR XGI330_NTSCPhase[] = {0x21,0xed,0x8a,0x8};
+UCHAR XGI330_PALPhase[] = {0x2a,0x5,0xd3,0x0};
+UCHAR XGI330_NTSCPhase2[] = {0x21,0xF0,0x7B,0xD6};/*301b*/
+UCHAR XGI330_PALPhase2[] = {0x2a,0x09,0x86,0xe9};
+UCHAR XGI330_PALMPhase[] = {0x21,0xE4,0x2E,0x9B}; /*palmn*/
+UCHAR XGI330_PALNPhase[] = {0x21,0xF4,0x3E,0xBA};
+UCHAR XG40_I2CDefinition = 0x00 ;
+UCHAR XG20_CR97 = 0x10 ;
+
+UCHAR XG21_DVOSetting = 0x00 ;
+UCHAR XG21_CR2E = 0x00 ;
+UCHAR XG21_CR2F = 0x00 ;
+UCHAR XG21_CR46 = 0x00 ;
+UCHAR XG21_CR47 = 0x00 ;
+
+UCHAR XG27_CR97 = 0xC1 ;
+UCHAR XG27_SR36 = 0x30 ;
+UCHAR XG27_CR8F = 0x0C ;
+UCHAR XG27_CRD0[] = {0,0,0,0,0,0,0,0x82,0x00,0x66,0x01,0x00} ;
+UCHAR XG27_CRDE[] = {0,0} ;
+UCHAR XG27_SR40 = 0x04 ;
+UCHAR XG27_SR41 = 0x00 ;
+
+UCHAR XGI330_CHTVVCLKUNTSC[]={0x00 };
+
+UCHAR XGI330_CHTVVCLKONTSC[]={0x00 };
+
+UCHAR XGI330_CHTVVCLKUPAL[]={0x00 };
+
+UCHAR XGI330_CHTVVCLKOPAL[]={0x00 };
+
+UCHAR XGI7007_CHTVVCLKUNTSC[]={CH7007TVVCLK30_2,
+ CH7007TVVCLK30_2,
+ CH7007TVVCLK30_2,
+ CH7007TVVCLK30_2,
+ CH7007TVVCLK28_1,
+ CH7007TVVCLK47_8
+ };
+
+UCHAR XGI7007_CHTVVCLKONTSC[]={CH7007TVVCLK26_4,
+ CH7007TVVCLK26_4,
+ CH7007TVVCLK26_4,
+ CH7007TVVCLK26_4,
+ CH7007TVVCLK24_6,
+ CH7007TVVCLK43_6
+ };
+
+UCHAR XGI7007_CHTVVCLKUPAL[]={CH7007TVVCLK31_5,
+ CH7007TVVCLK31_5,
+ CH7007TVVCLK31_5,
+ CH7007TVVCLK31_5,
+ CH7007TVVCLK26_2,
+ CH7007TVVCLK39
+ };
+
+UCHAR XGI7007_CHTVVCLKOPAL[]={CH7007TVVCLK31_5,
+ CH7007TVVCLK31_5,
+ CH7007TVVCLK31_5,
+ CH7007TVVCLK31_5,
+ CH7007TVVCLK26_2,
+ CH7007TVVCLK36
+ };
+
+XGI330_VCLKDataStruct XGI_CH7007VCLKData[]=
+{
+ { 0x60,0x36,30}, /* 0 30.2 MHZ */
+ { 0x40,0x4A,28}, /* 1 28.19 MHZ */
+ { 0x9F,0x46,44}, /* 2 43.6 MHZ */
+ { 0x97,0x2C,26}, /* 3 26.4 MHZ */
+ { 0x44,0xE4,25}, /* 4 24.6 MHZ */
+ { 0x7E,0x32,47}, /* 5 47.832 MHZ */
+ { 0x8A,0x24,31}, /* 6 31.5 MHZ */
+ { 0x97,0x2C,26}, /* 7 26.2 MHZ */
+ { 0xCE,0x3C,39}, /* 8 39 MHZ */
+ { 0x52,0x4A,36}, /* 9 36 MHZ */
+ { 0xFF,0x00,0 } /* End mark */
+};
+
+XGI330_VCLKDataStruct XGI_VCLKData[]=
+{
+ /* SR2B,SR2C,SR2D */
+ { 0x1B,0xE1,25 },/* 00 (25.175MHz) */
+
+ { 0x4E,0xE4,28 },/* 01 (28.322MHz) */
+
+ { 0x57,0xE4,31 },/* 02 (31.500MHz) */
+
+ { 0xC3,0xC8,36 },/* 03 (36.000MHz) */
+
+ { 0x42,0xE2,40 },/* 04 (40.000MHz) */
+
+ { 0xFE,0xCD,43 },/* 05 (43.163MHz) */
+
+ { 0x5D,0xC4,44 },/* 06 (44.900MHz) */
+
+ { 0x52,0xE2,49 },/* 07 (49.500MHz) */
+
+ { 0x53,0xE2,50 },/* 08 (50.000MHz) */
+
+ { 0x74,0x67,52 },/* 09 (52.406MHz) */
+
+ { 0x6D,0x66,56 },/* 0A (56.250MHz) */
+
+ { 0x6C,0xC3,65 },/* 0B (65.000MHz) */
+
+ { 0x46,0x44,67 },/* 0C (67.765MHz) */
+
+ { 0xB1,0x46,68 },/* 0D (68.179MHz) */
+
+ { 0xD3,0x4A,72 },/* 0E (72.852MHz) */
+
+ { 0x29,0x61,75 },/* 0F (75.000MHz) */
+
+ { 0x6E,0x46,76 },/* 10 (75.800MHz) */
+
+ { 0x2B,0x61,78 },/* 11 (78.750MHz) */
+
+ { 0x31,0x42,79 },/* 12 (79.411MHz) */
+
+ { 0xAB,0x44,83 },/* 13 (83.950MHz) */
+
+ { 0x46,0x25,84 },/* 14 (84.800MHz) */
+
+ { 0x78,0x29,86 },/* 15 (86.600MHz) */
+
+ { 0x62,0x44,94 },/* 16 (94.500MHz) */
+
+ { 0x2B,0x41,104 },/* 17 (104.998MHz) */
+
+ { 0x3A,0x23,105 },/* 18 (105.882MHz) */
+
+ { 0x70,0x44,108 },/* 19 (107.862MHz) */
+
+ { 0x3C,0x23,109 },/* 1A (109.175MHz) */
+
+ { 0x5E,0x43,113 },/* 1B (113.309MHz) */
+
+ { 0xBC,0x44,116 },/* 1C (116.406MHz) */
+
+ { 0xE0,0x46,132 },/* 1D (132.258MHz) */
+
+ { 0x54,0x42,135 },/* 1E (135.500MHz) */
+
+ { 0x9C,0x22,139 },/* 1F (139.275MHz) */
+
+ { 0x41,0x22,157 },/* 20 (157.500MHz) */
+
+ { 0x70,0x24,162 },/* 21 (161.793MHz) */
+
+ { 0x30,0x21,175 },/* 22 (175.000MHz) */
+
+ { 0x4E,0x22,189 },/* 23 (188.520MHz) */
+
+ { 0xDE,0x26,194 },/* 24 (194.400MHz) */
+
+ { 0x62,0x06,202 },/* 25 (202.500MHz) */
+
+ { 0x3F,0x03,229 },/* 26 (229.500MHz) */
+
+ { 0xB8,0x06,234 },/* 27 (233.178MHz) */
+
+ { 0x34,0x02,253 },/* 28 (252.699MHz) */
+
+ { 0x58,0x04,255 },/* 29 (254.817MHz) */
+
+ { 0x24,0x01,265 },/* 2A (265.728MHz) */
+
+ { 0x9B,0x02,267 },/* 2B (266.952MHz) */
+
+ { 0x70,0x05,270 },/* 2C (269.65567MHz) */
+
+ { 0x25,0x01,272 },/* 2D (272.04199MHz) */
+
+ { 0x9C,0x02,277 },/* 2E (277.015MHz) */
+
+ { 0x27,0x01,286 },/* 2F (286.359985MHz) */
+
+ { 0xB3,0x04,291 },/* 30 (291.13266MHz) */
+
+ { 0xBC,0x05,292 },/* 31 (291.766MHz) */
+
+ { 0xF6,0x0A,310 },/* 32 (309.789459MHz) */
+
+ { 0x95,0x01,315 },/* 33 (315.195MHz) */
+
+ { 0xF0,0x09,324 },/* 34 (323.586792MHz) */
+
+ { 0xFE,0x0A,331 },/* 35 (330.615631MHz) */
+
+ { 0xF3,0x09,332 },/* 36 (332.177612MHz) */
+
+ { 0x5E,0x03,340 },/* 37 (340.477MHz) */
+
+ { 0xE8,0x07,376 },/* 38 (375.847504MHz) */
+
+ { 0xDE, 0x06,389 },/* 39 (388.631439MHz) */
+
+ { 0x52,0x2A,54 },/* 3A (54.000MHz) */
+
+ { 0x52,0x6A,27 },/* 3B (27.000MHz) */
+
+ { 0x62,0x24,70 },/* 3C (70.874991MHz) */
+
+ { 0x62,0x64,70 },/* 3D (70.1048912MHz) */
+
+ { 0xA8,0x4C,30 },/* 3E (30.1048912MHz) */
+
+ { 0x20,0x26,33 },/* 3F (33.7499957MHz) */
+
+ { 0x31,0xc2,39 },/* 40 (39.77MHz) */
+
+ { 0x11,0x21,30 },/* 41 (30MHz) }// NTSC 1024X768 */
+
+ { 0x2E,0x48,25 },/* 42 (25.175MHz) }// ScaleLCD */
+
+ { 0x24,0x46,25 },/* 43 (25.175MHz) */
+
+ { 0x26,0x64,28 },/* 44 (28.322MHz) */
+
+ { 0x37,0x64,40 },/* 45 (40.000MHz) */
+
+ { 0xA1,0x42,108 },/* 46 (95.000MHz) }// QVGA */
+
+ { 0x37,0x61,100 },/* 47 (100.00MHz) */
+
+ { 0x78,0x27,108 },/* 48 (108.200MHz) */
+
+ { 0xBF,0xC8,35 },/* 49 (35.2MHz) */
+
+ { 0x66,0x43,123 },/* 4A (122.61Mhz) */
+
+ { 0x2C,0x61,80 },/* 4B (80.350Mhz) */
+
+ { 0x3B,0x61,108 },/* 4C (107.385Mhz) */
+
+
+/* { 0x60,0x36,30 },// 4D (30.200MHz) }// No use
+
+ { 0x60,0x36,30 },// 4E (30.200MHz) }// No use
+
+ { 0x60,0x36,30 },// 4F (30.200MHz) }// No use
+
+ { 0x60,0x36,30 },// 50 (30.200MHz) }// CHTV
+
+ { 0x40,0x4A,28 },// 51 (28.190MHz)
+
+ { 0x9F,0x46,44 },// 52 (43.600MHz)
+
+ { 0x97,0x2C,26 },// 53 (26.400MHz)
+
+ { 0x44,0xE4,25 },// 54 (24.600MHz)
+
+ { 0x7E,0x32,47 },// 55 (47.832MHz)
+
+ { 0x8A,0x24,31 },// 56 (31.500MHz)
+
+ { 0x97,0x2C,26 },// 57 (26.200MHz)
+
+ { 0xCE,0x3C,39 },// 58 (39.000MHz)
+
+ { 0x52,0x4A,36 },// 59 (36.000MHz)
+
+*/
+ { 0x69,0x61,191 }, /* 4D (190.96MHz ) */
+ { 0x4F,0x22,192 }, /* 4E (192.069MHz) */
+ { 0x28,0x26,322 }, /* 4F (322.273MHz) */
+ { 0x5C,0x6B,27 }, /* 50 (27.74HMz) */
+ { 0x57,0x24,126 }, /* 51 (125.999MHz) */
+ { 0x5C,0x42,148 }, /* 52 (148.5MHz) */
+ { 0x42,0x61,120 }, /* 53 (120.839MHz) */
+ { 0x62,0x61,178 }, /* 54 (178.992MHz) */
+ { 0x59,0x22,217 }, /* 55 (217.325MHz) */
+ { 0x29,0x01,300 }, /* 56 (299.505Mhz) */
+ { 0x52,0x63,74 }, /* 57 (74.25MHz) */
+
+
+ { 0xFF,0x00,0 }/* End mark */
+ } ;
+
+XGI330_VCLKDataStruct XGI_VBVCLKData[]=
+{
+ { 0x1B,0xE1,25 },/* 00 (25.175MHz) */
+
+ { 0x4E,0xE4,28 },/* 01 (28.322MHz) */
+
+ { 0x57,0xE4,31 },/* 02 (31.500MHz) */
+
+ { 0xC3,0xC8,36 },/* 03 (36.000MHz) */
+
+ { 0x42,0x47,40 },/* 04 (40.000MHz) */
+
+ { 0xFE,0xCD,43 },/* 05 (43.163MHz) */
+
+ { 0x5D,0xC4,44 },/* 06 (44.900MHz) */
+
+ { 0x52,0x47,49 },/* 07 (49.500MHz) */
+
+ { 0x53,0x47,50 },/* 08 (50.000MHz) */
+
+ { 0x74,0x67,52 },/* 09 (52.406MHz) */
+
+ { 0x6D,0x66,56 },/* 0A (56.250MHz) */
+
+ { 0x35,0x62,65 },/* 0B (65.000MHz) */
+
+ { 0x46,0x44,67 },/* 0C (67.765MHz) */
+
+ { 0xB1,0x46,68 },/* 0D (68.179MHz) */
+
+ { 0xD3,0x4A,72 },/* 0E (72.852MHz) */
+
+ { 0x29,0x61,75 },/* 0F (75.000MHz) */
+
+ { 0x6D,0x46,75 },/* 10 (75.800MHz) */
+
+ { 0x41,0x43,78 },/* 11 (78.750MHz) */
+
+ { 0x31,0x42,79 },/* 12 (79.411MHz) */
+
+ { 0xAB,0x44,83 },/* 13 (83.950MHz) */
+
+ { 0x46,0x25,84 },/* 14 (84.800MHz) */
+
+ { 0x78,0x29,86 },/* 15 (86.600MHz) */
+
+ { 0x62,0x44,94 },/* 16 (94.500MHz) */
+
+ { 0x2B,0x22,104 },/* 17 (104.998MHz) */
+
+ { 0x49,0x24,105 },/* 18 (105.882MHz) */
+
+ { 0xF8,0x2F,108 },/* 19 (108.279MHz) */
+
+ { 0x3C,0x23,109 },/* 1A (109.175MHz) */
+
+ { 0x5E,0x43,113 },/* 1B (113.309MHz) */
+
+ { 0xBC,0x44,116 },/* 1C (116.406MHz) */
+
+ { 0xE0,0x46,132 },/* 1D (132.258MHz) */
+
+ { 0xD4,0x28,135 },/* 1E (135.220MHz) */
+
+ { 0xEA,0x2A,139 },/* 1F (139.275MHz) */
+
+ { 0x41,0x22,157 },/* 20 (157.500MHz) */
+
+ { 0x70,0x24,162 },/* 21 (161.793MHz) */
+
+ { 0x30,0x21,175 },/* 22 (175.000MHz) */
+
+ { 0x4E,0x22,189 },/* 23 (188.520MHz) */
+
+ { 0xDE,0x26,194 },/* 24 (194.400MHz) */
+
+ { 0x70,0x07,202 },/* 25 (202.500MHz) */
+
+ { 0x3F,0x03,229 },/* 26 (229.500MHz) */
+
+ { 0xB8,0x06,234 },/* 27 (233.178MHz) */
+
+ { 0x34,0x02,253 },/* 28 (252.699997 MHz) */
+
+ { 0x58,0x04,255 },/* 29 (254.817MHz) */
+
+ { 0x24,0x01,265 },/* 2A (265.728MHz) */
+
+ { 0x9B,0x02,267 },/* 2B (266.952MHz) */
+
+ { 0x70,0x05,270 },/* 2C (269.65567 MHz) */
+
+ { 0x25,0x01,272 },/* 2D (272.041992 MHz) */
+
+ { 0x9C,0x02,277 },/* 2E (277.015MHz) */
+
+ { 0x27,0x01,286 },/* 2F (286.359985 MHz) */
+
+ { 0x3C,0x02,291 },/* 30 (291.132660 MHz) */
+
+ { 0xEF,0x0A,292 },/* 31 (291.766MHz) */
+
+ { 0xF6,0x0A,310 },/* 32 (309.789459 MHz) */
+
+ { 0x95,0x01,315 },/* 33 (315.195MHz) */
+
+ { 0xF0,0x09,324 },/* 34 (323.586792 MHz) */
+
+ { 0xFE,0x0A,331 },/* 35 (330.615631 MHz) */
+
+ { 0xF3,0x09,332 },/* 36 (332.177612 MHz) */
+
+ { 0xEA,0x08,340 },/* 37 (340.477MHz) */
+
+ { 0xE8,0x07,376 },/* 38 (375.847504 MHz) */
+
+ { 0xDE,0x06,389 },/* 39 (388.631439 MHz) */
+
+ { 0x52,0x2A,54 },/* 3A (54.000MHz) */
+
+ { 0x52,0x6A,27 },/* 3B (27.000MHz) */
+
+
+ { 0x62,0x24,70 },/* 3C (70.874991MHz) */
+
+
+ { 0x62,0x64,70 },/* 3D (70.1048912MHz) */
+
+ { 0xA8,0x4C,30 },/* 3E (30.1048912MHz) */
+
+ { 0x20,0x26,33 },/* 3F (33.7499957MHz) */
+
+ { 0x31,0xc2,39 },/* 40 (39.77MHz) */
+
+ { 0x11,0x21,30 },/* 41 (30MHz) }// NTSC 1024X768 */
+
+ { 0x2E,0x48,25 },/* 42 (25.175MHz) }// ScaleLCD */
+
+ { 0x24,0x46,25 },/* 43 (25.175MHz) */
+
+ { 0x26,0x64,28 },/* 44 (28.322MHz) */
+
+ { 0x37,0x64,40 },/* 45 (40.000MHz) */
+
+ { 0xA1,0x42,108 },/* 46 (95.000MHz) }// QVGA */
+
+ { 0x37,0x61,100 },/* 47 (100.00MHz) */
+
+ { 0x78,0x27,108 },/* 48 (108.200MHz) */
+
+ { 0xBF,0xC8,35 },/* 49 (35.2MHz) */
+
+ { 0x66,0x43,123 },/* 4A (122.61Mhz) */
+
+ { 0x2C,0x61,80 },/* 4B (80.350Mhz) */
+
+ { 0x3B,0x61,108 },/* 4C (107.385Mhz) */
+
+/*
+ { 0x60,0x36,30 },// 4D (30.200MHz) }// No use
+
+ { 0x60,0x36,30 },// 4E (30.200MHz) }// No use
+
+ { 0x60,0x36,30 },// 4F (30.200MHz) }// No use
+
+ { 0x60,0x36,30 },// 50 (30.200MHz) }// CHTV
+
+ { 0x40,0x4A,28 },// 51 (28.190MHz)
+
+ { 0x9F,0x46,44 },// 52 (43.600MHz)
+
+ { 0x97,0x2C,26 },// 53 (26.400MHz)
+
+ { 0x44,0xE4,25 },// 54 (24.600MHz)
+
+ { 0x7E,0x32,47 },// 55 (47.832MHz)
+
+ { 0x8A,0x24,31 },// 56 (31.500MHz)
+
+ { 0x97,0x2C,26 },// 57 (26.200MHz)
+
+ { 0xCE,0x3C,39 },// 58 (39.000MHz)
+
+ { 0x52,0x4A,36 },// 59 (36.000MHz)
+*/
+ { 0x69,0x61,191 }, /* 4D (190.96MHz ) */
+ { 0x4F,0x22,192 }, /* 4E (192.069MHz) */
+ { 0x28,0x26,322 }, /* 4F (322.273MHz) */
+ { 0x5C,0x6B,27 }, /* 50 (27.74HMz) */
+ { 0x57,0x24,126 }, /* 51 (125.999MHz) */
+ { 0x5C,0x42,148 }, /* 52 (148.5MHz) */
+ { 0x42,0x61,120 }, /* 53 (120.839MHz) */
+ { 0x62,0x61,178 }, /* 54 (178.992MHz) */
+ { 0x59,0x22,217 }, /* 55 (217.325MHz) */
+ { 0x29,0x01,300 }, /* 56 (299.505Mhz) */
+ { 0x52,0x63,74 }, /* 57 (74.25MHz) */
+
+
+ { 0xFF,0x00,0 } /* End mark */
+};
+
+UCHAR XGI660_TVDelayList[]=
+{
+ 0x44, /* ; 0 ExtNTSCDelay */
+ 0x44, /* ; 1 StNTSCDelay */
+ 0x44, /* ; 2 ExtPALDelay */
+ 0x44, /* ; 3 StPALDelay */
+ 0x44, /* ; 4 ExtHiTVDelay(1080i) */
+ 0x44, /* ; 5 StHiTVDelay(1080i) */
+ 0x44, /* ; 6 ExtYPbPrDelay(525i) */
+ 0x44, /* ; 7 StYPbPrDealy(525i) */
+ 0x44, /* ; 8 ExtYPbPrDelay(525p) */
+ 0x44, /* ; 9 StYPbPrDealy(525p) */
+ 0x44, /* ; A ExtYPbPrDelay(750p) */
+ 0x44 /* ; B StYPbPrDealy(750p) */
+};
+
+UCHAR XGI660_TVDelayList2[]=
+{
+ 0x44, /* ; 0 ExtNTSCDelay */
+ 0x44, /* ; 1 StNTSCDelay */
+ 0x44, /* ; 2 ExtPALDelay */
+ 0x44, /* ; 3 StPALDelay */
+ 0x44, /* ; 4 ExtHiTVDelay */
+ 0x44, /* ; 5 StHiTVDelay */
+ 0x44, /* ; 6 ExtYPbPrDelay(525i) */
+ 0x44, /* ; 7 StYPbPrDealy(525i) */
+ 0x44, /* ; 8 ExtYPbPrDelay(525p) */
+ 0x44, /* ; 9 StYPbPrDealy(525p) */
+ 0x44, /* ; A ExtYPbPrDelay(750p) */
+ 0x44 /* ; B StYPbPrDealy(750p) */
+};
+
+UCHAR XGI301TVDelayList[]=
+{
+ 0x22, /* ; 0 ExtNTSCDelay */
+ 0x22, /* ; 1 StNTSCDelay */
+ 0x22, /* ; 2 ExtPALDelay */
+ 0x22, /* ; 3 StPALDelay */
+ 0x88, /* ; 4 ExtHiTVDelay(1080i) */
+ 0xBB, /* ; 5 StHiTVDelay(1080i) */
+ 0x22, /* ; 6 ExtYPbPrDelay(525i) */
+ 0x22, /* ; 7 StYPbPrDealy(525i) */
+ 0x22, /* ; 8 ExtYPbPrDelay(525p) */
+ 0x22, /* ; 9 StYPbPrDealy(525p) */
+ 0x22, /* ; A ExtYPbPrDelay(750p) */
+ 0x22 /* B StYPbPrDealy(750p) */
+};
+
+UCHAR XGI301TVDelayList2[]=
+{
+ 0x22, /* ; 0 ExtNTSCDelay */
+ 0x22, /* ; 1 StNTSCDelay */
+ 0x22, /* ; 2 ExtPALDelay */
+ 0x22, /* ; 3 StPALDelay */
+ 0x22, /* ; 4 ExtHiTVDelay */
+ 0x22, /* ; 5 StHiTVDelay */
+ 0x22, /* ; 6 ExtYPbPrDelay(525i) */
+ 0x22, /* ; 7 StYPbPrDealy(525i) */
+ 0x22, /* ; 8 ExtYPbPrDelay(525p) */
+ 0x22, /* ; 9 StYPbPrDealy(525p) */
+ 0x22, /* ; A ExtYPbPrDelay(750p) */
+ 0x22 /* ; B StYPbPrDealy(750p) */
+};
+
+
+UCHAR TVAntiFlickList[]=
+{/* NTSCAntiFlicker */
+ 0x04, /* ; 0 Adaptive */
+ 0x00, /* ; 1 new anti-flicker ? */
+/* PALAntiFlicker */
+ 0x04, /* ; 0 Adaptive */
+ 0x08, /* ; 1 new anti-flicker ? */
+/* HiTVAntiFlicker */
+ 0x04, /* ; 0 ? */
+ 0x00 /* ; 1 new anti-flicker ? */
+};
+
+
+UCHAR TVEdgeList[]=
+{
+ 0x00, /* ; 0 NTSC No Edge enhance */
+ 0x04, /* ; 1 NTSC Adaptive Edge enhance */
+ 0x00, /* ; 0 PAL No Edge enhance */
+ 0x04, /* ; 1 PAL Adaptive Edge enhance */
+ 0x00, /* ; 0 HiTV */
+ 0x00 /* ; 1 HiTV */
+};
+
+ULONG TVPhaseList[]=
+{ 0x08BAED21, /* ; 0 NTSC phase */
+ 0x00E3052A, /* ; 1 PAL phase */
+ 0x9B2EE421, /* ; 2 PAL-M phase */
+ 0xBA3EF421, /* ; 3 PAL-N phase */
+ 0xA7A28B1E, /* ; 4 NTSC 1024x768 */
+ 0xE00A831E, /* ; 5 PAL-M 1024x768 */
+ 0x00000000, /* ; 6 reserved */
+ 0x00000000, /* ; 7 reserved */
+ 0xD67BF021, /* ; 8 NTSC phase */
+ 0xE986092A, /* ; 9 PAL phase */
+ 0xA4EFE621, /* ; A PAL-M phase */
+ 0x4694F621, /* ; B PAL-N phase */
+ 0x8BDE711C, /* ; C NTSC 1024x768 */
+ 0xE00A831E /* ; D PAL-M 1024x768 */
+};
+
+UCHAR NTSCYFilter1[]=
+{
+ 0x00,0xF4,0x10,0x38 ,/* 0 : 320x text mode */
+ 0x00,0xF4,0x10,0x38 ,/* 1 : 360x text mode */
+ 0xEB,0x04,0x25,0x18 ,/* 2 : 640x text mode */
+ 0xF1,0x04,0x1F,0x18 ,/* 3 : 720x text mode */
+ 0x00,0xF4,0x10,0x38 ,/* 4 : 320x gra. mode */
+ 0xEB,0x04,0x25,0x18 ,/* 5 : 640x gra. mode */
+ 0xEB,0x15,0x25,0xF6 /* 6 : 800x gra. mode */
+};
+
+UCHAR PALYFilter1[]=
+{
+ 0x00,0xF4,0x10,0x38, /* 0 : 320x text mode */
+ 0x00,0xF4,0x10,0x38 ,/* 1 : 360x text mode */
+ 0xF1,0xF7,0x1F,0x32 ,/* 2 : 640x text mode */
+ 0xF3,0x00,0x1D,0x20 ,/* 3 : 720x text mode */
+ 0x00,0xF4,0x10,0x38 ,/* 4 : 320x gra. mode */
+ 0xF1,0xF7,0x1F,0x32 ,/* 5 : 640x gra. mode */
+ 0xFC,0xFB,0x14,0x2A /* 6 : 800x gra. mode */
+};
+
+UCHAR PALMYFilter1[]=
+{
+ 0x00,0xF4,0x10,0x38, /* 0 : 320x text mode */
+ 0x00,0xF4,0x10,0x38, /* 1 : 360x text mode */
+ 0xEB,0x04,0x10,0x18, /* 2 : 640x text mode */
+ 0xF7,0x06,0x19,0x14, /* 3 : 720x text mode */
+ 0x00,0xF4,0x10,0x38, /* 4 : 320x gra. mode */
+ 0xEB,0x04,0x25,0x18, /* 5 : 640x gra. mode */
+ 0xEB,0x15,0x25,0xF6, /* 6 : 800x gra. mode */
+ 0xFF,0xFF,0xFF,0xFF /* End of Table */
+};
+
+UCHAR PALNYFilter1[]=
+{
+ 0x00,0xF4,0x10,0x38, /* 0 : 320x text mode */
+ 0x00,0xF4,0x10,0x38, /* 1 : 360x text mode */
+ 0xEB,0x04,0x10,0x18, /* 2 : 640x text mode */
+ 0xF7,0x06,0x19,0x14, /* 3 : 720x text mode */
+ 0x00,0xF4,0x10,0x38, /* 4 : 320x gra. mode */
+ 0xEB,0x04,0x25,0x18, /* 5 : 640x gra. mode */
+ 0xEB,0x15,0x25,0xF6, /* 6 : 800x gra. mode */
+ 0xFF,0xFF,0xFF,0xFF /* End of Table */
+};
+
+UCHAR NTSCYFilter2[]=
+{
+ 0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 0 : 320x text mode */
+ 0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 1 : 360x text mode */
+ 0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 2 : 640x text mode */
+ 0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 3 : 720x text mode */
+ 0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 4 : 320x gra. mode */
+ 0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 5 : 640x gra. mode */
+ 0x01,0x01,0xFC,0xF8,0x08,0x26,0x38, /* 6 : 800x gra. mode */
+ 0xFF,0xFF,0xFC,0x00,0x0F,0x22,0x28 /* 7 : 1024xgra. mode */
+};
+
+UCHAR PALYFilter2[]=
+{
+ 0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 0 : 320x text mode */
+ 0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 1 : 360x text mode */
+ 0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 2 : 640x text mode */
+ 0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 3 : 720x text mode */
+ 0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 4 : 320x gra. mode */
+ 0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 5 : 640x gra. mode */
+ 0x01,0x01,0xFC,0xF8,0x08,0x26,0x38, /* 6 : 800x gra. mode */
+ 0xFF,0xFF,0xFC,0x00,0x0F,0x22,0x28 /* 7 : 1024xgra. mode */
+};
+
+UCHAR PALMYFilter2[]=
+{
+ 0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 0 : 320x text mode */
+ 0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 1 : 360x text mode */
+ 0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 2 : 640x text mode */
+ 0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 3 : 720x text mode */
+ 0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 4 : 320x gra. mode */
+ 0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 5 : 640x gra. mode */
+ 0x01,0x01,0xFC,0xF8,0x08,0x26,0x38, /* 6 : 800x gra. mode */
+ 0xFF,0xFF,0xFC,0x00,0x0F,0x22,0x28 /* 7 : 1024xgra. mode */
+};
+
+UCHAR PALNYFilter2[]=
+{
+ 0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 0 : 320x text mode */
+ 0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 1 : 360x text mode */
+ 0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 2 : 640x text mode */
+ 0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 3 : 720x text mode */
+ 0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 4 : 320x gra. mode */
+ 0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 5 : 640x gra. mode */
+ 0x01,0x01,0xFC,0xF8,0x08,0x26,0x38, /* 6 : 800x gra. mode */
+ 0xFF,0xFF,0xFC,0x00,0x0F,0x22,0x28 /* 7 : 1024xgra. mode */
+};
+
+UCHAR XGI_NTSC1024AdjTime[]=
+{
+ 0xa7,0x07,0xf2,0x6e,0x17,0x8b,0x73,0x53,
+ 0x13,0x40,0x34,0xF4,0x63,0xBB,0xCC,0x7A,
+ 0x58,0xe4,0x73,0xd0,0x13
+};
+
+XGI301C_Tap4TimingStruct HiTVTap4Timing[]=
+{
+ {0,{
+ 0x00,0x20,0x00,0x00,0x7F,0x20,0x02,0x7F, /* ; C0-C7 */
+ 0x7D,0x20,0x04,0x7F,0x7D,0x1F,0x06,0x7E, /* ; C8-CF */
+ 0x7C,0x1D,0x09,0x7E,0x7C,0x1B,0x0B,0x7E, /* ; D0-D7 */
+ 0x7C,0x19,0x0E,0x7D,0x7C,0x17,0x11,0x7C, /* ; D8-DF */
+ 0x7C,0x14,0x14,0x7C,0x7C,0x11,0x17,0x7C, /* ; E0-E7 */
+ 0x7D,0x0E,0x19,0x7C,0x7E,0x0B,0x1B,0x7C, /* ; EA-EF */
+ 0x7E,0x09,0x1D,0x7C,0x7F,0x06,0x1F,0x7C, /* ; F0-F7 */
+ 0x7F,0x04,0x20,0x7D,0x00,0x02,0x20,0x7E /* ; F8-FF */
+ }
+ }
+};
+
+XGI301C_Tap4TimingStruct EnlargeTap4Timing[]=
+{
+ {0,{
+ 0x00,0x20,0x00,0x00,0x7F,0x20,0x02,0x7F, /* ; C0-C7 */
+ 0x7D,0x20,0x04,0x7F,0x7D,0x1F,0x06,0x7E, /* ; C8-CF */
+ 0x7C,0x1D,0x09,0x7E,0x7C,0x1B,0x0B,0x7E, /* ; D0-D7 */
+ 0x7C,0x19,0x0E,0x7D,0x7C,0x17,0x11,0x7C, /* ; D8-DF */
+ 0x7C,0x14,0x14,0x7C,0x7C,0x11,0x17,0x7C, /* ; E0-E7 */
+ 0x7D,0x0E,0x19,0x7C,0x7E,0x0B,0x1B,0x7C, /* ; EA-EF */
+ 0x7E,0x09,0x1D,0x7C,0x7F,0x06,0x1F,0x7C, /* ; F0-F7 */
+ 0x7F,0x04,0x20,0x7D,0x00,0x02,0x20,0x7E /* ; F8-FF */
+ }
+ }
+};
+
+XGI301C_Tap4TimingStruct NoScaleTap4Timing[]=
+{
+ {0,{
+ 0x00,0x20,0x00,0x00,0x7F,0x20,0x02,0x7F, /* ; C0-C7 */
+ 0x7D,0x20,0x04,0x7F,0x7D,0x1F,0x06,0x7E, /* ; C8-CF */
+ 0x7C,0x1D,0x09,0x7E,0x7C,0x1B,0x0B,0x7E, /* ; D0-D7 */
+ 0x7C,0x19,0x0E,0x7D,0x7C,0x17,0x11,0x7C, /* ; D8-DF */
+ 0x7C,0x14,0x14,0x7C,0x7C,0x11,0x17,0x7C, /* ; E0-E7 */
+ 0x7D,0x0E,0x19,0x7C,0x7E,0x0B,0x1B,0x7C, /* ; EA-EF */
+ 0x7E,0x09,0x1D,0x7C,0x7F,0x06,0x1F,0x7C, /* ; F0-F7 */
+ 0x7F,0x04,0x20,0x7D,0x00,0x02,0x20,0x7E /* ; F8-FF */
+ }
+ }
+};
+
+XGI301C_Tap4TimingStruct PALTap4Timing[]=
+{
+ {600, {
+ 0x05,0x19,0x05,0x7D,0x03,0x19,0x06,0x7E, /* ; C0-C7 */
+ 0x02,0x19,0x08,0x7D,0x01,0x18,0x0A,0x7D, /* ; C8-CF */
+ 0x00,0x18,0x0C,0x7C,0x7F,0x17,0x0E,0x7C, /* ; D0-D7 */
+ 0x7E,0x16,0x0F,0x7D,0x7E,0x14,0x11,0x7D, /* ; D8-DF */
+ 0x7D,0x13,0x13,0x7D,0x7D,0x11,0x14,0x7E, /* ; E0-E7 */
+ 0x7D,0x0F,0x16,0x7E,0x7D,0x0E,0x17,0x7E, /* ; EA-EF */
+ 0x7D,0x0C,0x18,0x7F,0x7D,0x0A,0x18,0x01, /* ; F0-F7 */
+ 0x7D,0x08,0x19,0x02,0x7D,0x06,0x19,0x04 /* ; F8-FF */
+ }
+ },
+ {768, {
+ 0x08,0x12,0x08,0x7E,0x07,0x12,0x09,0x7E, /* ; C0-C7 */
+ 0x06,0x12,0x0A,0x7E,0x05,0x11,0x0B,0x7F, /* ; C8-CF */
+ 0x04,0x11,0x0C,0x7F,0x03,0x11,0x0C,0x00, /* ; D0-D7 */
+ 0x03,0x10,0x0D,0x00,0x02,0x0F,0x0E,0x01, /* ; D8-DF */
+ 0x01,0x0F,0x0F,0x01,0x01,0x0E,0x0F,0x02, /* ; E0-E7 */
+ 0x00,0x0D,0x10,0x03,0x7F,0x0C,0x11,0x04, /* ; EA-EF */
+ 0x7F,0x0C,0x11,0x04,0x7F,0x0B,0x11,0x05, /* ; F0-F7 */
+ 0x7E,0x0A,0x12,0x06,0x7E,0x09,0x12,0x07 /* ; F8-FF */
+ }
+ },
+ {0xFFFF,
+ {
+ 0x04,0x1A,0x04,0x7E,0x02,0x1B,0x05,0x7E, /* ; C0-C7 */
+ 0x01,0x1A,0x07,0x7E,0x00,0x1A,0x09,0x7D, /* ; C8-CF */
+ 0x7F,0x19,0x0B,0x7D,0x7E,0x18,0x0D,0x7D, /* ; D0-D7 */
+ 0x7D,0x17,0x10,0x7C,0x7D,0x15,0x12,0x7C, /* ; D8-DF */
+ 0x7C,0x14,0x14,0x7C,0x7C,0x12,0x15,0x7D, /* ; E0-E7 */
+ 0x7C,0x10,0x17,0x7D,0x7C,0x0D,0x18,0x7F, /* ; EA-EF */
+ 0x7D,0x0B,0x19,0x7F,0x7D,0x09,0x1A,0x00, /* ; F0-F7 */
+ 0x7D,0x07,0x1A,0x02,0x7E,0x05,0x1B,0x02 /* ; F8-FF */
+ }
+ }
+};
+
+XGI301C_Tap4TimingStruct NTSCTap4Timing[]=
+{
+ {480, {
+ 0x04,0x1A,0x04,0x7E,0x03,0x1A,0x06,0x7D, /* ; C0-C7 */
+ 0x01,0x1A,0x08,0x7D,0x00,0x19,0x0A,0x7D, /* ; C8-CF */
+ 0x7F,0x19,0x0C,0x7C,0x7E,0x18,0x0E,0x7C, /* ; D0-D7 */
+ 0x7E,0x17,0x10,0x7B,0x7D,0x15,0x12,0x7C, /* ; D8-DF */
+ 0x7D,0x13,0x13,0x7D,0x7C,0x12,0x15,0x7D, /* ; E0-E7 */
+ 0x7C,0x10,0x17,0x7D,0x7C,0x0E,0x18,0x7E, /* ; EA-EF */
+ 0x7D,0x0C,0x19,0x7E,0x7D,0x0A,0x19,0x00, /* ; F0-F7 */
+ 0x7D,0x08,0x1A,0x01,0x7E,0x06,0x1A,0x02 /* ; F8-FF */
+ }
+ },
+ {600, {
+ 0x07,0x14,0x07,0x7E,0x06,0x14,0x09,0x7D, /* ; C0-C7 */
+ 0x05,0x14,0x0A,0x7D,0x04,0x13,0x0B,0x7E, /* ; C8-CF */
+ 0x03,0x13,0x0C,0x7E,0x02,0x12,0x0D,0x7F, /* ; D0-D7 */
+ 0x01,0x12,0x0E,0x7F,0x01,0x11,0x0F,0x7F, /* ; D8-DF */
+ 0x01,0x10,0x10,0x00,0x7F,0x0F,0x11,0x01, /* ; E0-E7 */
+ 0x7F,0x0E,0x12,0x01,0x7E,0x0D,0x12,0x03, /* ; EA-EF */
+ 0x7E,0x0C,0x13,0x03,0x7E,0x0B,0x13,0x04, /* ; F0-F7 */
+ 0x7E,0x0A,0x14,0x04,0x7D,0x09,0x14,0x06 /* ; F8-FF */
+ }
+ },
+ {0xFFFF,
+ {
+ 0x09,0x0F,0x09,0x7F,0x08,0x0F,0x09,0x00, /* ; C0-C7 */
+ 0x07,0x0F,0x0A,0x00,0x06,0x0F,0x0A,0x01, /* ; C8-CF */
+ 0x06,0x0E,0x0B,0x01,0x05,0x0E,0x0B,0x02, /* ; D0-D7 */
+ 0x04,0x0E,0x0C,0x02,0x04,0x0D,0x0C,0x03, /* ; D8-DF */
+ 0x03,0x0D,0x0D,0x03,0x02,0x0C,0x0D,0x05, /* ; E0-E7 */
+ 0x02,0x0C,0x0E,0x04,0x01,0x0B,0x0E,0x06, /* ; EA-EF */
+ 0x01,0x0B,0x0E,0x06,0x00,0x0A,0x0F,0x07, /* ; F0-F7 */
+ 0x00,0x0A,0x0F,0x07,0x00,0x09,0x0F,0x08 /* ; F8-FF */
+ }
+ }
+};
+
+XGI301C_Tap4TimingStruct YPbPr525pTap4Timing[]=
+{
+ {480, {
+ 0x04,0x1A,0x04,0x7E,0x03,0x1A,0x06,0x7D, /* ; C0-C7 */
+ 0x01,0x1A,0x08,0x7D,0x00,0x19,0x0A,0x7D, /* ; C8-CF */
+ 0x7F,0x19,0x0C,0x7C,0x7E,0x18,0x0E,0x7C, /* ; D0-D7 */
+ 0x7E,0x17,0x10,0x7B,0x7D,0x15,0x12,0x7C, /* ; D8-DF */
+ 0x7D,0x13,0x13,0x7D,0x7C,0x12,0x15,0x7D, /* ; E0-E7 */
+ 0x7C,0x10,0x17,0x7D,0x7C,0x0E,0x18,0x7E, /* ; EA-EF */
+ 0x7D,0x0C,0x19,0x7E,0x7D,0x0A,0x19,0x00, /* ; F0-F7 */
+ 0x7D,0x08,0x1A,0x01,0x7E,0x06,0x1A,0x02 /* ; F8-FF */
+ }
+ },
+ {600, {
+ 0x07,0x14,0x07,0x7E,0x06,0x14,0x09,0x7D, /* ; C0-C7 */
+ 0x05,0x14,0x0A,0x7D,0x04,0x13,0x0B,0x7E, /* ; C8-CF */
+ 0x03,0x13,0x0C,0x7E,0x02,0x12,0x0D,0x7F, /* ; D0-D7 */
+ 0x01,0x12,0x0E,0x7F,0x01,0x11,0x0F,0x7F, /* ; D8-DF */
+ 0x01,0x10,0x10,0x00,0x7F,0x0F,0x11,0x01, /* ; E0-E7 */
+ 0x7F,0x0E,0x12,0x01,0x7E,0x0D,0x12,0x03, /* ; EA-EF */
+ 0x7E,0x0C,0x13,0x03,0x7E,0x0B,0x13,0x04, /* ; F0-F7 */
+ 0x7E,0x0A,0x14,0x04,0x7D,0x09,0x14,0x06 /* ; F8-FF */
+ }
+ },
+ {0xFFFF,
+ {
+ 0x09,0x0F,0x09,0x7F,0x08,0x0F,0x09,0x00, /* ; C0-C7 */
+ 0x07,0x0F,0x0A,0x00,0x06,0x0F,0x0A,0x01, /* ; C8-CF */
+ 0x06,0x0E,0x0B,0x01,0x05,0x0E,0x0B,0x02, /* ; D0-D7 */
+ 0x04,0x0E,0x0C,0x02,0x04,0x0D,0x0C,0x03, /* ; D8-DF */
+ 0x03,0x0D,0x0D,0x03,0x02,0x0C,0x0D,0x05, /* ; E0-E7 */
+ 0x02,0x0C,0x0E,0x04,0x01,0x0B,0x0E,0x06, /* ; EA-EF */
+ 0x01,0x0B,0x0E,0x06,0x00,0x0A,0x0F,0x07, /* ; F0-F7 */
+ 0x00,0x0A,0x0F,0x07,0x00,0x09,0x0F,0x08 /* ; F8-FF */
+ }
+ }
+};
+
+XGI301C_Tap4TimingStruct YPbPr525iTap4Timing[]=
+{
+ {480, {
+ 0x04,0x1A,0x04,0x7E,0x03,0x1A,0x06,0x7D, /* ; C0-C7 */
+ 0x01,0x1A,0x08,0x7D,0x00,0x19,0x0A,0x7D, /* ; C8-CF */
+ 0x7F,0x19,0x0C,0x7C,0x7E,0x18,0x0E,0x7C, /* ; D0-D7 */
+ 0x7E,0x17,0x10,0x7B,0x7D,0x15,0x12,0x7C, /* ; D8-DF */
+ 0x7D,0x13,0x13,0x7D,0x7C,0x12,0x15,0x7D, /* ; E0-E7 */
+ 0x7C,0x10,0x17,0x7D,0x7C,0x0E,0x18,0x7E, /* ; EA-EF */
+ 0x7D,0x0C,0x19,0x7E,0x7D,0x0A,0x19,0x00, /* ; F0-F7 */
+ 0x7D,0x08,0x1A,0x01,0x7E,0x06,0x1A,0x02 /* ; F8-FF */
+ }
+ },
+ {600, {
+ 0x07,0x14,0x07,0x7E,0x06,0x14,0x09,0x7D, /* ; C0-C7 */
+ 0x05,0x14,0x0A,0x7D,0x04,0x13,0x0B,0x7E, /* ; C8-CF */
+ 0x03,0x13,0x0C,0x7E,0x02,0x12,0x0D,0x7F, /* ; D0-D7 */
+ 0x01,0x12,0x0E,0x7F,0x01,0x11,0x0F,0x7F, /* ; D8-DF */
+ 0x01,0x10,0x10,0x00,0x7F,0x0F,0x11,0x01, /* ; E0-E7 */
+ 0x7F,0x0E,0x12,0x01,0x7E,0x0D,0x12,0x03, /* ; EA-EF */
+ 0x7E,0x0C,0x13,0x03,0x7E,0x0B,0x13,0x04, /* ; F0-F7 */
+ 0x7E,0x0A,0x14,0x04,0x7D,0x09,0x14,0x06 /* ; F8-FF */
+ }
+ },
+ {0xFFFF,
+ {
+ 0x09,0x0F,0x09,0x7F,0x08,0x0F,0x09,0x00, /* ; C0-C7 */
+ 0x07,0x0F,0x0A,0x00,0x06,0x0F,0x0A,0x01, /* ; C8-CF */
+ 0x06,0x0E,0x0B,0x01,0x05,0x0E,0x0B,0x02, /* ; D0-D7 */
+ 0x04,0x0E,0x0C,0x02,0x04,0x0D,0x0C,0x03, /* ; D8-DF */
+ 0x03,0x0D,0x0D,0x03,0x02,0x0C,0x0D,0x05, /* ; E0-E7 */
+ 0x02,0x0C,0x0E,0x04,0x01,0x0B,0x0E,0x06, /* ; EA-EF */
+ 0x01,0x0B,0x0E,0x06,0x00,0x0A,0x0F,0x07, /* ; F0-F7 */
+ 0x00,0x0A,0x0F,0x07,0x00,0x09,0x0F,0x08 /* ; F8-FF */
+ }
+ }
+};
+
+XGI301C_Tap4TimingStruct YPbPr750pTap4Timing[]=
+{ {0xFFFF,
+ {
+ 0x05,0x19,0x05,0x7D,0x03,0x19,0x06,0x7E, /* ; C0-C7 */
+ 0x02,0x19,0x08,0x7D,0x01,0x18,0x0A,0x7D, /* ; C8-CF */
+ 0x00,0x18,0x0C,0x7C,0x7F,0x17,0x0E,0x7C, /* ; D0-D7 */
+ 0x7E,0x16,0x0F,0x7D,0x7E,0x14,0x11,0x7D, /* ; D8-DF */
+ 0x7D,0x13,0x13,0x7D,0x7D,0x11,0x14,0x7E, /* ; E0-E7 */
+ 0x7D,0x0F,0x16,0x7E,0x7D,0x0E,0x17,0x7E, /* ; EA-EF */
+ 0x7D,0x0C,0x18,0x7F,0x7D,0x0A,0x18,0x01, /* ; F0-F7 */
+ 0x7D,0x08,0x19,0x02,0x7D,0x06,0x19,0x04 /* F8-FF */
+ }
+ }
+};
diff --git a/drivers/staging/xgifb/vb_util.c b/drivers/staging/xgifb/vb_util.c
new file mode 100644
index 0000000..87531b4
--- /dev/null
+++ b/drivers/staging/xgifb/vb_util.c
@@ -0,0 +1,263 @@
+#include "osdef.h"
+#include "vb_def.h"
+#include "vgatypes.h"
+#include "vb_struct.h"
+
+#ifdef LINUX_KERNEL
+#include "XGIfb.h"
+#include <asm/io.h>
+#include <linux/types.h>
+#endif
+
+#ifdef TC
+#include <stdio.h>
+#include <string.h>
+#include <conio.h>
+#include <dos.h>
+#endif
+
+#ifdef WIN2000
+#include <dderror.h>
+#include <devioctl.h>
+#include <miniport.h>
+#include <ntddvdeo.h>
+#include <video.h>
+
+#include "xgiv.h"
+#include "dd_i2c.h"
+#include "tools.h"
+#endif
+
+#ifdef LINUX_XF86
+#include "xf86.h"
+#include "xf86PciInfo.h"
+#include "xgi.h"
+#include "xgi_regs.h"
+#endif
+
+
+
+
+void XGINew_SetReg1( ULONG , USHORT , USHORT ) ;
+void XGINew_SetReg2( ULONG , USHORT , USHORT ) ;
+void XGINew_SetReg3( ULONG , USHORT ) ;
+void XGINew_SetReg4( ULONG , ULONG ) ;
+UCHAR XGINew_GetReg1( ULONG , USHORT) ;
+UCHAR XGINew_GetReg2( ULONG ) ;
+ULONG XGINew_GetReg3( ULONG ) ;
+void XGINew_ClearDAC( PUCHAR ) ;
+void XGINew_SetRegANDOR(ULONG Port,USHORT Index,USHORT DataAND,USHORT DataOR);
+void XGINew_SetRegOR(ULONG Port,USHORT Index,USHORT DataOR);
+void XGINew_SetRegAND(ULONG Port,USHORT Index,USHORT DataAND);
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetReg1 */
+/* Input : */
+/* Output : */
+/* Description : SR CRTC GR */
+/* --------------------------------------------------------------------- */
+void XGINew_SetReg1( ULONG port , USHORT index , USHORT data )
+{
+#ifdef LINUX_XF86
+ OutPortByte( ( PUCHAR )(ULONG)port , index ) ;
+ OutPortByte( ( PUCHAR )(ULONG)port + 1 , data ) ;
+#else
+ OutPortByte( port , index ) ;
+ OutPortByte( port + 1 , data ) ;
+#endif
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetReg2 */
+/* Input : */
+/* Output : */
+/* Description : AR( 3C0 ) */
+/* --------------------------------------------------------------------- */
+/*void XGINew_SetReg2( ULONG port , USHORT index , USHORT data )
+{
+ InPortByte( ( PUCHAR )port + 0x3da - 0x3c0 ) ;
+ OutPortByte( XGINew_P3c0 , index ) ;
+ OutPortByte( XGINew_P3c0 , data ) ;
+ OutPortByte( XGINew_P3c0 , 0x20 ) ;
+}*/
+
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetReg3( ULONG port , USHORT data )
+{
+ OutPortByte( port , data ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetReg4 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetReg4( ULONG port , ULONG data )
+{
+ OutPortLong( port , data ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_GetReg1 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGINew_GetReg1( ULONG port , USHORT index )
+{
+ UCHAR data ;
+
+#ifdef LINUX_XF86
+ OutPortByte( ( PUCHAR )(ULONG)port , index ) ;
+ data = InPortByte( ( PUCHAR )(ULONG)port + 1 ) ;
+#else
+ OutPortByte( port , index ) ;
+ data = InPortByte( port + 1 ) ;
+#endif
+
+ return( data ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_GetReg2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGINew_GetReg2( ULONG port )
+{
+ UCHAR data ;
+
+ data = InPortByte( port ) ;
+
+ return( data ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_GetReg3 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+ULONG XGINew_GetReg3( ULONG port )
+{
+ ULONG data ;
+
+ data = InPortLong( port ) ;
+
+ return( data ) ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetRegANDOR */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetRegANDOR( ULONG Port , USHORT Index , USHORT DataAND , USHORT DataOR )
+{
+ USHORT temp ;
+
+ temp = XGINew_GetReg1( Port , Index ) ; /* XGINew_Part1Port index 02 */
+ temp = ( temp & ( DataAND ) ) | DataOR ;
+ XGINew_SetReg1( Port , Index , temp ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetRegAND */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetRegAND(ULONG Port,USHORT Index,USHORT DataAND)
+{
+ USHORT temp ;
+
+ temp = XGINew_GetReg1( Port , Index ) ; /* XGINew_Part1Port index 02 */
+ temp &= DataAND ;
+ XGINew_SetReg1( Port , Index , temp ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetRegOR */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetRegOR( ULONG Port , USHORT Index , USHORT DataOR )
+{
+ USHORT temp ;
+
+ temp = XGINew_GetReg1( Port , Index ) ; /* XGINew_Part1Port index 02 */
+ temp |= DataOR ;
+ XGINew_SetReg1( Port , Index , temp ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : NewDelaySecond */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void NewDelaySeconds( int seconds )
+{
+#ifdef WIN2000
+ int j ;
+#endif
+ int i ;
+
+
+ for( i = 0 ; i < seconds ; i++ )
+ {
+#ifdef TC
+ delay( 1000 ) ;
+#endif
+
+#ifdef WIN2000
+
+ for ( j = 0 ; j < 20000 ; j++ )
+ VideoPortStallExecution( 50 ) ;
+#endif
+
+#ifdef WINCE_HEADER
+#endif
+
+#ifdef LINUX_KERNEL
+#endif
+ }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : Newdebugcode */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void Newdebugcode( UCHAR code )
+{
+// OutPortByte ( 0x80 , code ) ;
+ /* OutPortByte ( 0x300 , code ) ; */
+ /* NewDelaySeconds( 0x3 ) ; */
+}
+
+
+
diff --git a/drivers/staging/xgifb/vb_util.h b/drivers/staging/xgifb/vb_util.h
new file mode 100644
index 0000000..91779d8
--- /dev/null
+++ b/drivers/staging/xgifb/vb_util.h
@@ -0,0 +1,15 @@
+#ifndef _VBUTIL_
+#define _VBUTIL_
+extern void NewDelaySeconds( int );
+extern void Newdebugcode( UCHAR );
+extern void XGINew_SetReg1(ULONG, USHORT, USHORT);
+extern void XGINew_SetReg3(ULONG, USHORT);
+extern UCHAR XGINew_GetReg1(ULONG, USHORT);
+extern UCHAR XGINew_GetReg2(ULONG);
+extern void XGINew_SetReg4(ULONG, ULONG);
+extern ULONG XGINew_GetReg3(ULONG);
+extern void XGINew_SetRegOR(ULONG Port,USHORT Index,USHORT DataOR);
+extern void XGINew_SetRegAND(ULONG Port,USHORT Index,USHORT DataAND);
+extern void XGINew_SetRegANDOR(ULONG Port,USHORT Index,USHORT DataAND,USHORT DataOR);
+#endif
+
diff --git a/drivers/staging/xgifb/vgatypes.h b/drivers/staging/xgifb/vgatypes.h
new file mode 100644
index 0000000..295ea86
--- /dev/null
+++ b/drivers/staging/xgifb/vgatypes.h
@@ -0,0 +1,325 @@
+
+#ifndef _VGATYPES_
+#define _VGATYPES_
+
+#include "osdef.h"
+
+#ifdef LINUX_XF86
+#include "xf86Version.h"
+#include "xf86Pci.h"
+#endif
+
+#ifdef LINUX_KERNEL /* We don't want the X driver to depend on kernel source */
+#include <linux/ioctl.h>
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+#ifndef CHAR
+typedef char CHAR;
+#endif
+
+#ifndef SHORT
+typedef short SHORT;
+#endif
+
+#ifndef LONG
+typedef long LONG;
+#endif
+
+#ifndef UCHAR
+typedef unsigned char UCHAR;
+#endif
+
+#ifndef USHORT
+typedef unsigned short USHORT;
+#endif
+
+#ifndef ULONG
+typedef unsigned long ULONG;
+#endif
+
+#ifndef PUCHAR
+typedef UCHAR *PUCHAR;
+#endif
+
+#ifndef PUSHORT
+typedef USHORT *PUSHORT;
+#endif
+
+#ifndef PLONGU
+typedef ULONG *PULONG;
+#endif
+
+#ifndef VOID
+typedef void VOID;
+#endif
+
+#ifndef PVOID
+typedef void *PVOID;
+#endif
+
+#ifndef BOOLEAN
+typedef UCHAR BOOLEAN;
+#endif
+/*
+#ifndef bool
+typedef UCHAR bool;
+#endif
+*/
+#ifdef LINUX_KERNEL
+typedef unsigned long XGIIOADDRESS;
+#endif
+
+#ifdef LINUX_XF86
+#if XF86_VERSION_CURRENT < XF86_VERSION_NUMERIC(4,2,0,0,0)
+typedef unsigned char IOADDRESS;
+typedef unsigned char XGIIOADDRESS;
+#else
+typedef IOADDRESS XGIIOADDRESS;
+#endif
+#endif
+
+#ifndef VBIOS_VER_MAX_LENGTH
+#define VBIOS_VER_MAX_LENGTH 4
+#endif
+
+#ifndef WIN2000
+
+#ifndef LINUX_KERNEL /* For the linux kernel, this is defined in xgifb.h */
+#ifndef XGI_CHIP_TYPE
+typedef enum _XGI_CHIP_TYPE {
+ XGI_VGALegacy = 0,
+#ifdef LINUX_XF86
+ XGI_530,
+ XGI_OLD,
+#endif
+ XGI_300,
+ XGI_630,
+ XGI_640,
+ XGI_315H,
+ XGI_315,
+ XGI_315PRO,
+ XGI_550,
+ XGI_650,
+ XGI_650M,
+ XGI_740,
+ XGI_330,
+ XGI_661,
+ XGI_660,
+ XGI_760,
+ XG40 = 32,
+ XG41,
+ XG42,
+ XG45,
+ XG20 = 48,
+ XG21,
+ XG27,
+ MAX_XGI_CHIP
+} XGI_CHIP_TYPE;
+#endif
+#endif
+
+#ifndef XGI_VB_CHIP_TYPE
+typedef enum _XGI_VB_CHIP_TYPE {
+ VB_CHIP_Legacy = 0,
+ VB_CHIP_301,
+ VB_CHIP_301B,
+ VB_CHIP_301LV,
+ VB_CHIP_302,
+ VB_CHIP_302B,
+ VB_CHIP_302LV,
+ VB_CHIP_301C,
+ VB_CHIP_302ELV,
+ VB_CHIP_UNKNOWN, /* other video bridge or no video bridge */
+ MAX_VB_CHIP
+} XGI_VB_CHIP_TYPE;
+#endif
+
+#ifndef XGI_LCD_TYPE
+typedef enum _XGI_LCD_TYPE {
+ LCD_INVALID = 0,
+ LCD_320x480, /* FSTN, DSTN */
+ LCD_640x480,
+ LCD_640x480_2, /* FSTN, DSTN */
+ LCD_640x480_3, /* FSTN, DSTN */
+ LCD_800x600,
+ LCD_848x480,
+ LCD_1024x600,
+ LCD_1024x768,
+ LCD_1152x768,
+ LCD_1152x864,
+ LCD_1280x720,
+ LCD_1280x768,
+ LCD_1280x800,
+ LCD_1280x960,
+ LCD_1280x1024,
+ LCD_1400x1050,
+ LCD_1600x1200,
+ LCD_1680x1050,
+ LCD_1920x1440,
+ LCD_2048x1536,
+ LCD_CUSTOM,
+ LCD_UNKNOWN
+} XGI_LCD_TYPE;
+#endif
+
+#endif /* not WIN2000 */
+
+#ifndef PXGI_DSReg
+typedef struct _XGI_DSReg
+{
+ UCHAR jIdx;
+ UCHAR jVal;
+} XGI_DSReg, *PXGI_DSReg;
+#endif
+
+#ifndef XGI_HW_DEVICE_INFO
+
+typedef struct _XGI_HW_DEVICE_INFO XGI_HW_DEVICE_INFO, *PXGI_HW_DEVICE_INFO;
+
+typedef BOOLEAN (*PXGI_QUERYSPACE) (PXGI_HW_DEVICE_INFO, ULONG, ULONG, ULONG *);
+
+struct _XGI_HW_DEVICE_INFO
+{
+ ULONG ulExternalChip; /* NO VB or other video bridge*/
+ /* if ujVBChipID = VB_CHIP_UNKNOWN, */
+#ifdef LINUX_XF86
+ PCITAG PciTag; /* PCI Tag */
+#endif
+
+ PUCHAR pjVirtualRomBase; /* ROM image */
+
+ BOOLEAN UseROM; /* Use the ROM image if provided */
+
+ PVOID pDevice;
+
+ PUCHAR pjVideoMemoryAddress;/* base virtual memory address */
+ /* of Linear VGA memory */
+
+ ULONG ulVideoMemorySize; /* size, in bytes, of the memory on the board */
+
+ PUCHAR pjIOAddress; /* base I/O address of VGA ports (0x3B0) */
+
+ PUCHAR pjCustomizedROMImage;
+
+ PUCHAR pj2ndVideoMemoryAddress;
+ ULONG ul2ndVideoMemorySize;
+
+ PUCHAR pj2ndIOAddress;
+/*#ifndef WIN2000
+ XGIIOADDRESS pjIOAddress; // base I/O address of VGA ports (0x3B0)
+#endif */
+ UCHAR jChipType; /* Used to Identify Graphics Chip */
+ /* defined in the data structure type */
+ /* "XGI_CHIP_TYPE" */
+
+ UCHAR jChipRevision; /* Used to Identify Graphics Chip Revision */
+
+ UCHAR ujVBChipID; /* the ID of video bridge */
+ /* defined in the data structure type */
+ /* "XGI_VB_CHIP_TYPE" */
+
+ BOOLEAN bNewScratch;
+
+ ULONG ulCRT2LCDType; /* defined in the data structure type */
+
+ ULONG usExternalChip; /* NO VB or other video bridge (other than */
+ /* video bridge) */
+
+ BOOLEAN bIntegratedMMEnabled;/* supporting integration MM enable */
+
+ BOOLEAN bSkipDramSizing; /* True: Skip video memory sizing. */
+
+ BOOLEAN bSkipSense;
+
+ BOOLEAN bIsPowerSaving; /* True: XGIInit() is invoked by power management,
+ otherwise by 2nd adapter's initialzation */
+
+ PXGI_DSReg pSR; /* restore SR registers in initial function. */
+ /* end data :(idx, val) = (FF, FF). */
+ /* Note : restore SR registers if */
+ /* bSkipDramSizing = TRUE */
+
+ PXGI_DSReg pCR; /* restore CR registers in initial function. */
+ /* end data :(idx, val) = (FF, FF) */
+ /* Note : restore cR registers if */
+ /* bSkipDramSizing = TRUE */
+/*
+#endif
+*/
+
+ PXGI_QUERYSPACE pQueryVGAConfigSpace;
+
+ PXGI_QUERYSPACE pQueryNorthBridgeSpace;
+
+ UCHAR szVBIOSVer[VBIOS_VER_MAX_LENGTH];
+
+};
+#endif
+
+/* Addtional IOCTL for communication xgifb <> X driver */
+/* If changing this, xgifb.h must also be changed (for xgifb) */
+
+#ifdef LINUX_XF86 /* We don't want the X driver to depend on the kernel source */
+
+/* ioctl for identifying and giving some info (esp. memory heap start) */
+#define XGIFB_GET_INFO 0x80046ef8 /* Wow, what a terrible hack... */
+
+/* Structure argument for XGIFB_GET_INFO ioctl */
+typedef struct _XGIFB_INFO xgifb_info, *pxgifb_info;
+
+struct _XGIFB_INFO {
+ CARD32 xgifb_id; /* for identifying xgifb */
+#ifndef XGIFB_ID
+#define XGIFB_ID 0x53495346 /* Identify myself with 'XGIF' */
+#endif
+ CARD32 chip_id; /* PCI ID of detected chip */
+ CARD32 memory; /* video memory in KB which xgifb manages */
+ CARD32 heapstart; /* heap start (= xgifb "mem" argument) in KB */
+ CARD8 fbvidmode; /* current xgifb mode */
+
+ CARD8 xgifb_version;
+ CARD8 xgifb_revision;
+ CARD8 xgifb_patchlevel;
+
+ CARD8 xgifb_caps; /* xgifb's capabilities */
+
+ CARD32 xgifb_tqlen; /* turbo queue length (in KB) */
+
+ CARD32 xgifb_pcibus; /* The card's PCI ID */
+ CARD32 xgifb_pcislot;
+ CARD32 xgifb_pcifunc;
+
+ CARD8 xgifb_lcdpdc;
+
+ CARD8 xgifb_lcda;
+
+ CARD32 xgifb_vbflags;
+ CARD32 xgifb_currentvbflags;
+
+ CARD32 xgifb_scalelcd;
+ CARD32 xgifb_specialtiming;
+
+ CARD8 xgifb_haveemi;
+ CARD8 xgifb_emi30,xgifb_emi31,xgifb_emi32,xgifb_emi33;
+ CARD8 xgifb_haveemilcd;
+
+ CARD8 xgifb_lcdpdca;
+
+ CARD8 reserved[212]; /* for future use */
+};
+#endif
+
+#endif
+
diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c
index e89304c..b53deee 100644
--- a/drivers/telephony/ixj.c
+++ b/drivers/telephony/ixj.c
@@ -5879,20 +5879,13 @@
static int ixj_build_filter_cadence(IXJ *j, IXJ_FILTER_CADENCE __user * cp)
{
IXJ_FILTER_CADENCE *lcp;
- lcp = kmalloc(sizeof(IXJ_FILTER_CADENCE), GFP_KERNEL);
- if (lcp == NULL) {
+ lcp = memdup_user(cp, sizeof(IXJ_FILTER_CADENCE));
+ if (IS_ERR(lcp)) {
if(ixjdebug & 0x0001) {
- printk(KERN_INFO "Could not allocate memory for cadence\n");
+ printk(KERN_INFO "Could not allocate memory for cadence or could not copy cadence to kernel\n");
}
- return -ENOMEM;
+ return PTR_ERR(lcp);
}
- if (copy_from_user(lcp, cp, sizeof(IXJ_FILTER_CADENCE))) {
- if(ixjdebug & 0x0001) {
- printk(KERN_INFO "Could not copy cadence to kernel\n");
- }
- kfree(lcp);
- return -EFAULT;
- }
if (lcp->filter > 5) {
if(ixjdebug & 0x0001) {
printk(KERN_INFO "Cadence out of range\n");
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 0c2f14f..61d7550 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1201,7 +1201,7 @@
if (rcv->urb == NULL) {
dev_dbg(&intf->dev,
"out of memory (read urbs usb_alloc_urb)\n");
- goto alloc_fail7;
+ goto alloc_fail6;
}
rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
@@ -1225,7 +1225,7 @@
if (snd->urb == NULL) {
dev_dbg(&intf->dev,
"out of memory (write urbs usb_alloc_urb)");
- goto alloc_fail7;
+ goto alloc_fail8;
}
if (usb_endpoint_xfer_int(epwrite))
@@ -1264,6 +1264,7 @@
i = device_create_file(&intf->dev,
&dev_attr_iCountryCodeRelDate);
if (i < 0) {
+ device_remove_file(&intf->dev, &dev_attr_wCountryCodes);
kfree(acm->country_codes);
goto skip_countries;
}
@@ -1300,6 +1301,7 @@
usb_free_urb(acm->wb[i].urb);
alloc_fail7:
acm_read_buffers_free(acm);
+alloc_fail6:
for (i = 0; i < num_rx_buf; i++)
usb_free_urb(acm->ru[i].urb);
usb_free_urb(acm->ctrlurb);
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index ded550e..a6bd53a 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1272,8 +1272,7 @@
static void choose_wakeup(struct usb_device *udev, pm_message_t msg)
{
- int w, i;
- struct usb_interface *intf;
+ int w;
/* Remote wakeup is needed only when we actually go to sleep.
* For things like FREEZE and QUIESCE, if the device is already
@@ -1285,16 +1284,10 @@
return;
}
- /* If remote wakeup is permitted, see whether any interface drivers
+ /* Enable remote wakeup if it is allowed, even if no interface drivers
* actually want it.
*/
- w = 0;
- if (device_may_wakeup(&udev->dev) && udev->actconfig) {
- for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
- intf = udev->actconfig->interface[i];
- w |= intf->needs_remote_wakeup;
- }
- }
+ w = device_may_wakeup(&udev->dev);
/* If the device is autosuspended with the wrong wakeup setting,
* autoresume now so the setting can be changed.
@@ -1328,6 +1321,7 @@
/* For all other calls, take the device back to full power and
* tell the PM core in case it was autosuspended previously.
+ * Unbind the interfaces that will need rebinding later.
*/
} else {
status = usb_resume_both(udev, msg);
@@ -1336,6 +1330,7 @@
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
udev->last_busy = jiffies;
+ do_unbind_rebind(udev, DO_REBIND);
}
}
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index a73e08f..fd4c36e 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -416,8 +416,11 @@
/* A length of zero means transfer the whole sg list */
len = length;
if (len == 0) {
- for_each_sg(sg, sg, nents, i)
- len += sg->length;
+ struct scatterlist *sg2;
+ int j;
+
+ for_each_sg(sg, sg2, nents, j)
+ len += sg2->length;
}
} else {
/*
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 649c0c5..591ae9f 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -295,6 +295,7 @@
boolean "S3C HS/OtG USB Device controller"
depends on S3C_DEV_USB_HSOTG
select USB_GADGET_S3C_HSOTG_PIO
+ select USB_GADGET_DUALSPEED
help
The Samsung S3C64XX USB2.0 high-speed gadget controller
integrated into the S3C64XX series SoC.
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index 43bf445..b91115f 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -101,7 +101,7 @@
static struct usb_audio_control mute_control = {
.list = LIST_HEAD_INIT(mute_control.list),
.name = "Mute Control",
- .type = UAC_MUTE_CONTROL,
+ .type = UAC_FU_MUTE,
/* Todo: add real Mute control code */
.set = generic_set_cmd,
.get = generic_get_cmd,
@@ -110,7 +110,7 @@
static struct usb_audio_control volume_control = {
.list = LIST_HEAD_INIT(volume_control.list),
.name = "Volume Control",
- .type = UAC_VOLUME_CONTROL,
+ .type = UAC_FU_VOLUME,
/* Todo: add real Volume control code */
.set = generic_set_cmd,
.get = generic_get_cmd,
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
index 38226e9..95dd466 100644
--- a/drivers/usb/gadget/f_eem.c
+++ b/drivers/usb/gadget/f_eem.c
@@ -469,8 +469,7 @@
crc = get_unaligned_le32(skb->data + len
- ETH_FCS_LEN);
crc2 = ~crc32_le(~0,
- skb->data,
- skb->len - ETH_FCS_LEN);
+ skb->data, len - ETH_FCS_LEN);
} else {
crc = get_unaligned_be32(skb->data + len
- ETH_FCS_LEN);
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index d69eccf..2aaa0f7 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -136,7 +136,7 @@
* handling setup requests immidiatelly user space may be so
* slow that another setup will be sent to the gadget but this
* time not to us but another function and then there could be
- * a race. Is taht the case? Or maybe we can use cdev->req
+ * a race. Is that the case? Or maybe we can use cdev->req
* after all, maybe we just need some spinlock for that? */
struct usb_request *ep0req; /* P: mutex */
struct completion ep0req_completion; /* P: mutex */
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 7d05a0b..4ce899c 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -321,8 +321,8 @@
/* Data shared by all the FSG instances. */
struct fsg_common {
struct usb_gadget *gadget;
- struct fsg_dev *fsg;
- struct fsg_dev *prev_fsg;
+ struct fsg_dev *fsg, *new_fsg;
+ wait_queue_head_t fsg_wait;
/* filesem protects: backing files in use */
struct rw_semaphore filesem;
@@ -351,7 +351,6 @@
enum fsg_state state; /* For exception handling */
unsigned int exception_req_tag;
- u8 config, new_config;
enum data_direction data_dir;
u32 data_size;
u32 data_size_from_cmnd;
@@ -595,7 +594,7 @@
u16 w_value = le16_to_cpu(ctrl->wValue);
u16 w_length = le16_to_cpu(ctrl->wLength);
- if (!fsg->common->config)
+ if (!fsg_is_set(fsg->common))
return -EOPNOTSUPP;
switch (ctrl->bRequest) {
@@ -2303,24 +2302,20 @@
return -ENOMEM;
}
-/*
- * Reset interface setting and re-init endpoint state (toggle etc).
- * Call with altsetting < 0 to disable the interface. The only other
- * available altsetting is 0, which enables the interface.
- */
-static int do_set_interface(struct fsg_common *common, int altsetting)
+/* Reset interface setting and re-init endpoint state (toggle etc). */
+static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg)
{
- int rc = 0;
- int i;
- const struct usb_endpoint_descriptor *d;
+ const struct usb_endpoint_descriptor *d;
+ struct fsg_dev *fsg;
+ int i, rc = 0;
if (common->running)
DBG(common, "reset interface\n");
reset:
/* Deallocate the requests */
- if (common->prev_fsg) {
- struct fsg_dev *fsg = common->prev_fsg;
+ if (common->fsg) {
+ fsg = common->fsg;
for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
struct fsg_buffhd *bh = &common->buffhds[i];
@@ -2345,88 +2340,53 @@
fsg->bulk_out_enabled = 0;
}
- common->prev_fsg = 0;
+ common->fsg = NULL;
+ wake_up(&common->fsg_wait);
}
common->running = 0;
- if (altsetting < 0 || rc != 0)
+ if (!new_fsg || rc)
return rc;
- DBG(common, "set interface %d\n", altsetting);
+ common->fsg = new_fsg;
+ fsg = common->fsg;
- if (fsg_is_set(common)) {
- struct fsg_dev *fsg = common->fsg;
- common->prev_fsg = common->fsg;
+ /* Enable the endpoints */
+ d = fsg_ep_desc(common->gadget,
+ &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc);
+ rc = enable_endpoint(common, fsg->bulk_in, d);
+ if (rc)
+ goto reset;
+ fsg->bulk_in_enabled = 1;
- /* Enable the endpoints */
- d = fsg_ep_desc(common->gadget,
- &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc);
- rc = enable_endpoint(common, fsg->bulk_in, d);
+ d = fsg_ep_desc(common->gadget,
+ &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc);
+ rc = enable_endpoint(common, fsg->bulk_out, d);
+ if (rc)
+ goto reset;
+ fsg->bulk_out_enabled = 1;
+ common->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize);
+ clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
+
+ /* Allocate the requests */
+ for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+ struct fsg_buffhd *bh = &common->buffhds[i];
+
+ rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
if (rc)
goto reset;
- fsg->bulk_in_enabled = 1;
-
- d = fsg_ep_desc(common->gadget,
- &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc);
- rc = enable_endpoint(common, fsg->bulk_out, d);
+ rc = alloc_request(common, fsg->bulk_out, &bh->outreq);
if (rc)
goto reset;
- fsg->bulk_out_enabled = 1;
- common->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize);
- clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
-
- /* Allocate the requests */
- for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
- struct fsg_buffhd *bh = &common->buffhds[i];
-
- rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
- if (rc)
- goto reset;
- rc = alloc_request(common, fsg->bulk_out, &bh->outreq);
- if (rc)
- goto reset;
- bh->inreq->buf = bh->outreq->buf = bh->buf;
- bh->inreq->context = bh->outreq->context = bh;
- bh->inreq->complete = bulk_in_complete;
- bh->outreq->complete = bulk_out_complete;
- }
-
- common->running = 1;
- for (i = 0; i < common->nluns; ++i)
- common->luns[i].unit_attention_data = SS_RESET_OCCURRED;
- return rc;
- } else {
- return -EIO;
- }
-}
-
-
-/*
- * Change our operational configuration. This code must agree with the code
- * that returns config descriptors, and with interface altsetting code.
- *
- * It's also responsible for power management interactions. Some
- * configurations might not work with our current power sources.
- * For now we just assume the gadget is always self-powered.
- */
-static int do_set_config(struct fsg_common *common, u8 new_config)
-{
- int rc = 0;
-
- /* Disable the single interface */
- if (common->config != 0) {
- DBG(common, "reset config\n");
- common->config = 0;
- rc = do_set_interface(common, -1);
+ bh->inreq->buf = bh->outreq->buf = bh->buf;
+ bh->inreq->context = bh->outreq->context = bh;
+ bh->inreq->complete = bulk_in_complete;
+ bh->outreq->complete = bulk_out_complete;
}
- /* Enable the interface */
- if (new_config != 0) {
- common->config = new_config;
- rc = do_set_interface(common, 0);
- if (rc != 0)
- common->config = 0; /* Reset on errors */
- }
+ common->running = 1;
+ for (i = 0; i < common->nluns; ++i)
+ common->luns[i].unit_attention_data = SS_RESET_OCCURRED;
return rc;
}
@@ -2437,9 +2397,7 @@
static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
{
struct fsg_dev *fsg = fsg_from_func(f);
- fsg->common->prev_fsg = fsg->common->fsg;
- fsg->common->fsg = fsg;
- fsg->common->new_config = 1;
+ fsg->common->new_fsg = fsg;
raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
return 0;
}
@@ -2447,9 +2405,7 @@
static void fsg_disable(struct usb_function *f)
{
struct fsg_dev *fsg = fsg_from_func(f);
- fsg->common->prev_fsg = fsg->common->fsg;
- fsg->common->fsg = fsg;
- fsg->common->new_config = 0;
+ fsg->common->new_fsg = NULL;
raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
}
@@ -2459,19 +2415,17 @@
static void handle_exception(struct fsg_common *common)
{
siginfo_t info;
- int sig;
int i;
struct fsg_buffhd *bh;
enum fsg_state old_state;
- u8 new_config;
struct fsg_lun *curlun;
unsigned int exception_req_tag;
- int rc;
/* Clear the existing signals. Anything but SIGUSR1 is converted
* into a high-priority EXIT exception. */
for (;;) {
- sig = dequeue_signal_lock(current, ¤t->blocked, &info);
+ int sig =
+ dequeue_signal_lock(current, ¤t->blocked, &info);
if (!sig)
break;
if (sig != SIGUSR1) {
@@ -2482,7 +2436,7 @@
}
/* Cancel all the pending transfers */
- if (fsg_is_set(common)) {
+ if (likely(common->fsg)) {
for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
bh = &common->buffhds[i];
if (bh->inreq_busy)
@@ -2523,7 +2477,6 @@
common->next_buffhd_to_fill = &common->buffhds[0];
common->next_buffhd_to_drain = &common->buffhds[0];
exception_req_tag = common->exception_req_tag;
- new_config = common->new_config;
old_state = common->state;
if (old_state == FSG_STATE_ABORT_BULK_OUT)
@@ -2573,12 +2526,12 @@
break;
case FSG_STATE_CONFIG_CHANGE:
- rc = do_set_config(common, new_config);
+ do_set_interface(common, common->new_fsg);
break;
case FSG_STATE_EXIT:
case FSG_STATE_TERMINATED:
- do_set_config(common, 0); /* Free resources */
+ do_set_interface(common, NULL); /* Free resources */
spin_lock_irq(&common->lock);
common->state = FSG_STATE_TERMINATED; /* Stop the thread */
spin_unlock_irq(&common->lock);
@@ -2863,6 +2816,7 @@
goto error_release;
}
init_completion(&common->thread_notifier);
+ init_waitqueue_head(&common->fsg_wait);
#undef OR
@@ -2957,9 +2911,17 @@
static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
{
struct fsg_dev *fsg = fsg_from_func(f);
+ struct fsg_common *common = fsg->common;
DBG(fsg, "unbind\n");
- fsg_common_put(fsg->common);
+ if (fsg->common->fsg == fsg) {
+ fsg->common->new_fsg = NULL;
+ raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
+ /* FIXME: make interruptible or killable somehow? */
+ wait_event(common->fsg_wait, common->fsg != fsg);
+ }
+
+ fsg_common_put(common);
usb_free_descriptors(fsg->function.descriptors);
usb_free_descriptors(fsg->function.hs_descriptors);
kfree(fsg);
@@ -2970,7 +2932,6 @@
{
struct fsg_dev *fsg = fsg_from_func(f);
struct usb_gadget *gadget = c->cdev->gadget;
- int rc;
int i;
struct usb_ep *ep;
@@ -2996,6 +2957,11 @@
ep->driver_data = fsg->common; /* claim the endpoint */
fsg->bulk_out = ep;
+ /* Copy descriptors */
+ f->descriptors = usb_copy_descriptors(fsg_fs_function);
+ if (unlikely(!f->descriptors))
+ return -ENOMEM;
+
if (gadget_is_dualspeed(gadget)) {
/* Assume endpoint addresses are the same for both speeds */
fsg_hs_bulk_in_desc.bEndpointAddress =
@@ -3003,16 +2969,17 @@
fsg_hs_bulk_out_desc.bEndpointAddress =
fsg_fs_bulk_out_desc.bEndpointAddress;
f->hs_descriptors = usb_copy_descriptors(fsg_hs_function);
- if (unlikely(!f->hs_descriptors))
+ if (unlikely(!f->hs_descriptors)) {
+ usb_free_descriptors(f->descriptors);
return -ENOMEM;
+ }
}
return 0;
autoconf_fail:
ERROR(fsg, "unable to autoconfigure all endpoints\n");
- rc = -ENOTSUPP;
- return rc;
+ return -ENOTSUPP;
}
@@ -3036,11 +3003,6 @@
fsg->function.name = FSG_DRIVER_DESC;
fsg->function.strings = fsg_strings_array;
- fsg->function.descriptors = usb_copy_descriptors(fsg_fs_function);
- if (unlikely(!fsg->function.descriptors)) {
- rc = -ENOMEM;
- goto error_free_fsg;
- }
fsg->function.bind = fsg_bind;
fsg->function.unbind = fsg_unbind;
fsg->function.setup = fsg_setup;
@@ -3056,19 +3018,9 @@
rc = usb_add_function(c, &fsg->function);
if (unlikely(rc))
- goto error_free_all;
-
- fsg_common_get(fsg->common);
- return 0;
-
-error_free_all:
- usb_free_descriptors(fsg->function.descriptors);
- /* fsg_bind() might have copied those; or maybe not? who cares
- * -- free it just in case. */
- usb_free_descriptors(fsg->function.hs_descriptors);
-error_free_fsg:
- kfree(fsg);
-
+ kfree(fsg);
+ else
+ fsg_common_get(fsg->common);
return rc;
}
diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c
index fc2611f..dbe6db0 100644
--- a/drivers/usb/gadget/f_uvc.c
+++ b/drivers/usb/gadget/f_uvc.c
@@ -28,7 +28,7 @@
#include "uvc.h"
-unsigned int uvc_trace_param;
+unsigned int uvc_gadget_trace_param;
/* --------------------------------------------------------------------------
* Function descriptors
@@ -656,6 +656,6 @@
return ret;
}
-module_param_named(trace, uvc_trace_param, uint, S_IRUGO|S_IWUSR);
+module_param_named(trace, uvc_gadget_trace_param, uint, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(trace, "Trace level bitmask");
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 2928523..82506ca 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -2400,7 +2400,7 @@
static struct qe_udc __devinit *qe_udc_config(struct of_device *ofdev)
{
struct qe_udc *udc;
- struct device_node *np = ofdev->node;
+ struct device_node *np = ofdev->dev.of_node;
unsigned int tmp_addr = 0;
struct usb_device_para __iomem *usbpram;
unsigned int i;
@@ -2525,7 +2525,7 @@
static int __devinit qe_udc_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
- struct device_node *np = ofdev->node;
+ struct device_node *np = ofdev->dev.of_node;
struct qe_ep *ep;
unsigned int ret = 0;
unsigned int i;
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index 4b0e4a0..d1af253 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -392,6 +392,17 @@
if (unlikely(ret < 0))
return ret;
+ /* After previous do_configs there may be some invalid
+ * pointers in c->interface array. This happens every time
+ * a user space function with fewer interfaces than a user
+ * space function that was run before the new one is run. The
+ * compasit's set_config() assumes that if there is no more
+ * then MAX_CONFIG_INTERFACES interfaces in a configuration
+ * then there is a NULL pointer after the last interface in
+ * c->interface array. We need to make sure this is true. */
+ if (c->next_interface_id < ARRAY_SIZE(c->interface))
+ c->interface[c->next_interface_id] = NULL;
+
return 0;
}
diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h
index 8b960de..c3caf1a 100644
--- a/drivers/usb/gadget/m66592-udc.h
+++ b/drivers/usb/gadget/m66592-udc.h
@@ -537,35 +537,35 @@
/*-------------------------------------------------------------------------*/
static inline u16 m66592_read(struct m66592 *m66592, unsigned long offset)
{
- return inw((unsigned long)m66592->reg + offset);
+ return ioread16(m66592->reg + offset);
}
static inline void m66592_read_fifo(struct m66592 *m66592,
unsigned long offset,
void *buf, unsigned long len)
{
- unsigned long fifoaddr = (unsigned long)m66592->reg + offset;
+ void __iomem *fifoaddr = m66592->reg + offset;
if (m66592->pdata->on_chip) {
len = (len + 3) / 4;
- insl(fifoaddr, buf, len);
+ ioread32_rep(fifoaddr, buf, len);
} else {
len = (len + 1) / 2;
- insw(fifoaddr, buf, len);
+ ioread16_rep(fifoaddr, buf, len);
}
}
static inline void m66592_write(struct m66592 *m66592, u16 val,
unsigned long offset)
{
- outw(val, (unsigned long)m66592->reg + offset);
+ iowrite16(val, m66592->reg + offset);
}
static inline void m66592_write_fifo(struct m66592 *m66592,
unsigned long offset,
void *buf, unsigned long len)
{
- unsigned long fifoaddr = (unsigned long)m66592->reg + offset;
+ void __iomem *fifoaddr = m66592->reg + offset;
if (m66592->pdata->on_chip) {
unsigned long count;
@@ -573,25 +573,25 @@
int i;
count = len / 4;
- outsl(fifoaddr, buf, count);
+ iowrite32_rep(fifoaddr, buf, count);
if (len & 0x00000003) {
pb = buf + count * 4;
for (i = 0; i < (len & 0x00000003); i++) {
if (m66592_read(m66592, M66592_CFBCFG)) /* le */
- outb(pb[i], fifoaddr + (3 - i));
+ iowrite8(pb[i], fifoaddr + (3 - i));
else
- outb(pb[i], fifoaddr + i);
+ iowrite8(pb[i], fifoaddr + i);
}
}
} else {
unsigned long odd = len & 0x0001;
len = len / 2;
- outsw(fifoaddr, buf, len);
+ iowrite16_rep(fifoaddr, buf, len);
if (odd) {
unsigned char *p = buf + len*2;
- outb(*p, fifoaddr);
+ iowrite8(*p, fifoaddr);
}
}
}
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 6b8bf8c..4c3ac5c 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -82,7 +82,7 @@
struct printer_dev {
spinlock_t lock; /* lock this structure */
/* lock buffer lists during read/write calls */
- spinlock_t lock_printer_io;
+ struct mutex lock_printer_io;
struct usb_gadget *gadget;
struct usb_request *req; /* for control responses */
u8 config;
@@ -567,7 +567,7 @@
DBG(dev, "printer_read trying to read %d bytes\n", (int)len);
- spin_lock(&dev->lock_printer_io);
+ mutex_lock(&dev->lock_printer_io);
spin_lock_irqsave(&dev->lock, flags);
/* We will use this flag later to check if a printer reset happened
@@ -601,7 +601,7 @@
* call or not.
*/
if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
- spin_unlock(&dev->lock_printer_io);
+ mutex_unlock(&dev->lock_printer_io);
return -EAGAIN;
}
@@ -648,7 +648,7 @@
if (dev->reset_printer) {
list_add(¤t_rx_req->list, &dev->rx_reqs);
spin_unlock_irqrestore(&dev->lock, flags);
- spin_unlock(&dev->lock_printer_io);
+ mutex_unlock(&dev->lock_printer_io);
return -EAGAIN;
}
@@ -673,7 +673,7 @@
dev->current_rx_buf = current_rx_buf;
spin_unlock_irqrestore(&dev->lock, flags);
- spin_unlock(&dev->lock_printer_io);
+ mutex_unlock(&dev->lock_printer_io);
DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied);
@@ -697,7 +697,7 @@
if (len == 0)
return -EINVAL;
- spin_lock(&dev->lock_printer_io);
+ mutex_lock(&dev->lock_printer_io);
spin_lock_irqsave(&dev->lock, flags);
/* Check if a printer reset happens while we have interrupts on */
@@ -713,7 +713,7 @@
* a NON-Blocking call or not.
*/
if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
- spin_unlock(&dev->lock_printer_io);
+ mutex_unlock(&dev->lock_printer_io);
return -EAGAIN;
}
@@ -752,7 +752,7 @@
if (copy_from_user(req->buf, buf, size)) {
list_add(&req->list, &dev->tx_reqs);
- spin_unlock(&dev->lock_printer_io);
+ mutex_unlock(&dev->lock_printer_io);
return bytes_copied;
}
@@ -766,14 +766,14 @@
if (dev->reset_printer) {
list_add(&req->list, &dev->tx_reqs);
spin_unlock_irqrestore(&dev->lock, flags);
- spin_unlock(&dev->lock_printer_io);
+ mutex_unlock(&dev->lock_printer_io);
return -EAGAIN;
}
if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) {
list_add(&req->list, &dev->tx_reqs);
spin_unlock_irqrestore(&dev->lock, flags);
- spin_unlock(&dev->lock_printer_io);
+ mutex_unlock(&dev->lock_printer_io);
return -EAGAIN;
}
@@ -782,7 +782,7 @@
}
spin_unlock_irqrestore(&dev->lock, flags);
- spin_unlock(&dev->lock_printer_io);
+ mutex_unlock(&dev->lock_printer_io);
DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied);
@@ -794,7 +794,7 @@
}
static int
-printer_fsync(struct file *fd, struct dentry *dentry, int datasync)
+printer_fsync(struct file *fd, int datasync)
{
struct printer_dev *dev = fd->private_data;
unsigned long flags;
@@ -820,11 +820,11 @@
unsigned long flags;
int status = 0;
- spin_lock(&dev->lock_printer_io);
+ mutex_lock(&dev->lock_printer_io);
spin_lock_irqsave(&dev->lock, flags);
setup_rx_reqs(dev);
spin_unlock_irqrestore(&dev->lock, flags);
- spin_unlock(&dev->lock_printer_io);
+ mutex_unlock(&dev->lock_printer_io);
poll_wait(fd, &dev->rx_wait, wait);
poll_wait(fd, &dev->tx_wait, wait);
@@ -1461,7 +1461,7 @@
}
spin_lock_init(&dev->lock);
- spin_lock_init(&dev->lock_printer_io);
+ mutex_init(&dev->lock_printer_io);
INIT_LIST_HEAD(&dev->tx_reqs);
INIT_LIST_HEAD(&dev->tx_reqs_active);
INIT_LIST_HEAD(&dev->rx_reqs);
@@ -1594,7 +1594,7 @@
{
int status;
- spin_lock(&usb_printer_gadget.lock_printer_io);
+ mutex_lock(&usb_printer_gadget.lock_printer_io);
class_destroy(usb_gadget_class);
unregister_chrdev_region(g_printer_devno, 2);
@@ -1602,6 +1602,6 @@
if (status)
ERROR(dev, "usb_gadget_unregister_driver %x\n", status);
- spin_unlock(&usb_printer_gadget.lock_printer_io);
+ mutex_unlock(&usb_printer_gadget.lock_printer_io);
}
module_exit(cleanup);
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 888d8f1..70a8178 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1500,7 +1500,7 @@
struct r8a66597 *r8a66597 = dev_get_drvdata(&pdev->dev);
del_timer_sync(&r8a66597->timer);
- iounmap((void *)r8a66597->reg);
+ iounmap(r8a66597->reg);
free_irq(platform_get_irq(pdev, 0), r8a66597);
r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
#ifdef CONFIG_HAVE_CLK
@@ -1578,7 +1578,7 @@
init_timer(&r8a66597->timer);
r8a66597->timer.function = r8a66597_timer;
r8a66597->timer.data = (unsigned long)r8a66597;
- r8a66597->reg = (unsigned long)reg;
+ r8a66597->reg = reg;
#ifdef CONFIG_HAVE_CLK
if (r8a66597->pdata->on_chip) {
diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h
index 9a537aa..f763b51 100644
--- a/drivers/usb/gadget/r8a66597-udc.h
+++ b/drivers/usb/gadget/r8a66597-udc.h
@@ -91,7 +91,7 @@
struct r8a66597 {
spinlock_t lock;
- unsigned long reg;
+ void __iomem *reg;
#ifdef CONFIG_HAVE_CLK
struct clk *clk;
@@ -127,7 +127,7 @@
static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset)
{
- return inw(r8a66597->reg + offset);
+ return ioread16(r8a66597->reg + offset);
}
static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
@@ -135,7 +135,7 @@
unsigned char *buf,
int len)
{
- unsigned long fifoaddr = r8a66597->reg + offset;
+ void __iomem *fifoaddr = r8a66597->reg + offset;
unsigned int data;
int i;
@@ -144,7 +144,7 @@
/* aligned buf case */
if (len >= 4 && !((unsigned long)buf & 0x03)) {
- insl(fifoaddr, buf, len / 4);
+ ioread32_rep(fifoaddr, buf, len / 4);
buf += len & ~0x03;
len &= 0x03;
}
@@ -152,7 +152,7 @@
/* unaligned buf case */
for (i = 0; i < len; i++) {
if (!(i & 0x03))
- data = inl(fifoaddr);
+ data = ioread32(fifoaddr);
buf[i] = (data >> ((i & 0x03) * 8)) & 0xff;
}
@@ -161,7 +161,7 @@
/* aligned buf case */
if (len >= 2 && !((unsigned long)buf & 0x01)) {
- insw(fifoaddr, buf, len / 2);
+ ioread16_rep(fifoaddr, buf, len / 2);
buf += len & ~0x01;
len &= 0x01;
}
@@ -169,7 +169,7 @@
/* unaligned buf case */
for (i = 0; i < len; i++) {
if (!(i & 0x01))
- data = inw(fifoaddr);
+ data = ioread16(fifoaddr);
buf[i] = (data >> ((i & 0x01) * 8)) & 0xff;
}
@@ -179,7 +179,7 @@
static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
unsigned long offset)
{
- outw(val, r8a66597->reg + offset);
+ iowrite16(val, r8a66597->reg + offset);
}
static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
@@ -187,21 +187,21 @@
unsigned char *buf,
int len)
{
- unsigned long fifoaddr = r8a66597->reg + offset;
+ void __iomem *fifoaddr = r8a66597->reg + offset;
int adj = 0;
int i;
if (r8a66597->pdata->on_chip) {
/* 32-bit access only if buf is 32-bit aligned */
if (len >= 4 && !((unsigned long)buf & 0x03)) {
- outsl(fifoaddr, buf, len / 4);
+ iowrite32_rep(fifoaddr, buf, len / 4);
buf += len & ~0x03;
len &= 0x03;
}
} else {
/* 16-bit access only if buf is 16-bit aligned */
if (len >= 2 && !((unsigned long)buf & 0x01)) {
- outsw(fifoaddr, buf, len / 2);
+ iowrite16_rep(fifoaddr, buf, len / 2);
buf += len & ~0x01;
len &= 0x01;
}
@@ -216,7 +216,7 @@
}
for (i = 0; i < len; i++)
- outb(buf[i], fifoaddr + adj - (i & adj));
+ iowrite8(buf[i], fifoaddr + adj - (i & adj));
}
static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 1f73b48..26193ec 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -297,6 +297,12 @@
*/
static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
{
+ unsigned int ep;
+ unsigned int addr;
+ unsigned int size;
+ int timeout;
+ u32 val;
+
/* the ryu 2.6.24 release ahs
writel(0x1C0, hsotg->regs + S3C_GRXFSIZ);
writel(S3C_GNPTXFSIZ_NPTxFStAddr(0x200) |
@@ -310,6 +316,51 @@
writel(S3C_GNPTXFSIZ_NPTxFStAddr(2048) |
S3C_GNPTXFSIZ_NPTxFDep(0x1C0),
hsotg->regs + S3C_GNPTXFSIZ);
+
+ /* arange all the rest of the TX FIFOs, as some versions of this
+ * block have overlapping default addresses. This also ensures
+ * that if the settings have been changed, then they are set to
+ * known values. */
+
+ /* start at the end of the GNPTXFSIZ, rounded up */
+ addr = 2048 + 1024;
+ size = 768;
+
+ /* currently we allocate TX FIFOs for all possible endpoints,
+ * and assume that they are all the same size. */
+
+ for (ep = 0; ep <= 15; ep++) {
+ val = addr;
+ val |= size << S3C_DPTXFSIZn_DPTxFSize_SHIFT;
+ addr += size;
+
+ writel(val, hsotg->regs + S3C_DPTXFSIZn(ep));
+ }
+
+ /* according to p428 of the design guide, we need to ensure that
+ * all fifos are flushed before continuing */
+
+ writel(S3C_GRSTCTL_TxFNum(0x10) | S3C_GRSTCTL_TxFFlsh |
+ S3C_GRSTCTL_RxFFlsh, hsotg->regs + S3C_GRSTCTL);
+
+ /* wait until the fifos are both flushed */
+ timeout = 100;
+ while (1) {
+ val = readl(hsotg->regs + S3C_GRSTCTL);
+
+ if ((val & (S3C_GRSTCTL_TxFFlsh | S3C_GRSTCTL_RxFFlsh)) == 0)
+ break;
+
+ if (--timeout == 0) {
+ dev_err(hsotg->dev,
+ "%s: timeout flushing fifos (GRSTCTL=%08x)\n",
+ __func__, val);
+ }
+
+ udelay(1);
+ }
+
+ dev_dbg(hsotg->dev, "FIFOs reset, timeout at %d\n", timeout);
}
/**
@@ -2574,6 +2625,9 @@
writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK,
hsotg->regs + S3C_DCTL);
+ /* must be at-least 3ms to allow bus to see disconnect */
+ msleep(3);
+
/* remove the soft-disconnect and let's go */
__bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
@@ -2730,6 +2784,9 @@
writel(0, hsotg->regs + S3C_DAINTMSK);
+ /* Be in disconnected state until gadget is registered */
+ __orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
+
if (0) {
/* post global nak until we're ready */
writel(S3C_DCTL_SGNPInNAK | S3C_DCTL_SGOUTNak,
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index d5f4c1d..e724a05 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1700,9 +1700,13 @@
if (!driver || driver != udc->driver || !driver->unbind)
return -EINVAL;
- dprintk(DEBUG_NORMAL,"usb_gadget_register_driver() '%s'\n",
+ dprintk(DEBUG_NORMAL, "usb_gadget_unregister_driver() '%s'\n",
driver->driver.name);
+ /* report disconnect */
+ if (driver->disconnect)
+ driver->disconnect(&udc->gadget);
+
driver->unbind(&udc->gadget);
device_del(&udc->gadget.dev);
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 16bdf77..3e8dcb5 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -536,17 +536,11 @@
list_move(&req->list, &port->read_pool);
}
- /* Push from tty to ldisc; this is immediate with low_latency, and
- * may trigger callbacks to this driver ... so drop the spinlock.
+ /* Push from tty to ldisc; without low_latency set this is handled by
+ * a workqueue, so we won't get callbacks and can hold port_lock
*/
if (tty && do_push) {
- spin_unlock_irq(&port->port_lock);
tty_flip_buffer_push(tty);
- wake_up_interruptible(&tty->read_wait);
- spin_lock_irq(&port->port_lock);
-
- /* tty may have been closed */
- tty = port->port_tty;
}
@@ -784,11 +778,6 @@
port->open_count = 1;
port->openclose = false;
- /* low_latency means ldiscs work in tasklet context, without
- * needing a workqueue schedule ... easier to keep up.
- */
- tty->low_latency = 1;
-
/* if connected, start the I/O stream */
if (port->port_usb) {
struct gserial *gser = port->port_usb;
@@ -1195,6 +1184,7 @@
n_ports = 0;
tty_unregister_driver(gs_tty_driver);
+ put_tty_driver(gs_tty_driver);
gs_tty_driver = NULL;
pr_debug("%s: cleaned up ttyGS* support\n", __func__);
diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
index 0a705e6..e92454c 100644
--- a/drivers/usb/gadget/uvc.h
+++ b/drivers/usb/gadget/uvc.h
@@ -107,11 +107,11 @@
#define UVC_WARN_MINMAX 0
#define UVC_WARN_PROBE_DEF 1
-extern unsigned int uvc_trace_param;
+extern unsigned int uvc_gadget_trace_param;
#define uvc_trace(flag, msg...) \
do { \
- if (uvc_trace_param & flag) \
+ if (uvc_gadget_trace_param & flag) \
printk(KERN_DEBUG "uvcvideo: " msg); \
} while (0)
@@ -220,16 +220,10 @@
#define to_uvc_file_handle(handle) \
container_of(handle, struct uvc_file_handle, vfh)
-extern struct v4l2_file_operations uvc_v4l2_fops;
-
/* ------------------------------------------------------------------------
* Functions
*/
-extern int uvc_video_enable(struct uvc_video *video, int enable);
-extern int uvc_video_init(struct uvc_video *video);
-extern int uvc_video_pump(struct uvc_video *video);
-
extern void uvc_endpoint_stream(struct uvc_device *dev);
extern void uvc_function_connect(struct uvc_device *uvc);
diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c
index 4389199..f7395ac 100644
--- a/drivers/usb/gadget/uvc_queue.c
+++ b/drivers/usb/gadget/uvc_queue.c
@@ -78,7 +78,8 @@
*
*/
-void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type)
+static void
+uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type)
{
mutex_init(&queue->mutex);
spin_lock_init(&queue->irqlock);
@@ -88,6 +89,28 @@
}
/*
+ * Free the video buffers.
+ *
+ * This function must be called with the queue lock held.
+ */
+static int uvc_free_buffers(struct uvc_video_queue *queue)
+{
+ unsigned int i;
+
+ for (i = 0; i < queue->count; ++i) {
+ if (queue->buffer[i].vma_use_count != 0)
+ return -EBUSY;
+ }
+
+ if (queue->count) {
+ vfree(queue->mem);
+ queue->count = 0;
+ }
+
+ return 0;
+}
+
+/*
* Allocate the video buffers.
*
* Pages are reserved to make sure they will not be swapped, as they will be
@@ -95,8 +118,9 @@
*
* Buffers will be individually mapped, so they must all be page aligned.
*/
-int uvc_alloc_buffers(struct uvc_video_queue *queue, unsigned int nbuffers,
- unsigned int buflength)
+static int
+uvc_alloc_buffers(struct uvc_video_queue *queue, unsigned int nbuffers,
+ unsigned int buflength)
{
unsigned int bufsize = PAGE_ALIGN(buflength);
unsigned int i;
@@ -150,28 +174,6 @@
return ret;
}
-/*
- * Free the video buffers.
- *
- * This function must be called with the queue lock held.
- */
-int uvc_free_buffers(struct uvc_video_queue *queue)
-{
- unsigned int i;
-
- for (i = 0; i < queue->count; ++i) {
- if (queue->buffer[i].vma_use_count != 0)
- return -EBUSY;
- }
-
- if (queue->count) {
- vfree(queue->mem);
- queue->count = 0;
- }
-
- return 0;
-}
-
static void __uvc_query_buffer(struct uvc_buffer *buf,
struct v4l2_buffer *v4l2_buf)
{
@@ -195,8 +197,8 @@
}
}
-int uvc_query_buffer(struct uvc_video_queue *queue,
- struct v4l2_buffer *v4l2_buf)
+static int
+uvc_query_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *v4l2_buf)
{
int ret = 0;
@@ -217,8 +219,8 @@
* Queue a video buffer. Attempting to queue a buffer that has already been
* queued will return -EINVAL.
*/
-int uvc_queue_buffer(struct uvc_video_queue *queue,
- struct v4l2_buffer *v4l2_buf)
+static int
+uvc_queue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *v4l2_buf)
{
struct uvc_buffer *buf;
unsigned long flags;
@@ -298,8 +300,9 @@
* Dequeue a video buffer. If nonblocking is false, block until a buffer is
* available.
*/
-int uvc_dequeue_buffer(struct uvc_video_queue *queue,
- struct v4l2_buffer *v4l2_buf, int nonblocking)
+static int
+uvc_dequeue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *v4l2_buf,
+ int nonblocking)
{
struct uvc_buffer *buf;
int ret = 0;
@@ -359,8 +362,9 @@
* This function implements video queue polling and is intended to be used by
* the device poll handler.
*/
-unsigned int uvc_queue_poll(struct uvc_video_queue *queue, struct file *file,
- poll_table *wait)
+static unsigned int
+uvc_queue_poll(struct uvc_video_queue *queue, struct file *file,
+ poll_table *wait)
{
struct uvc_buffer *buf;
unsigned int mask = 0;
@@ -407,7 +411,8 @@
* This function implements video buffer memory mapping and is intended to be
* used by the device mmap handler.
*/
-int uvc_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma)
+static int
+uvc_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma)
{
struct uvc_buffer *uninitialized_var(buffer);
struct page *page;
@@ -458,6 +463,42 @@
}
/*
+ * Cancel the video buffers queue.
+ *
+ * Cancelling the queue marks all buffers on the irq queue as erroneous,
+ * wakes them up and removes them from the queue.
+ *
+ * If the disconnect parameter is set, further calls to uvc_queue_buffer will
+ * fail with -ENODEV.
+ *
+ * This function acquires the irq spinlock and can be called from interrupt
+ * context.
+ */
+static void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect)
+{
+ struct uvc_buffer *buf;
+ unsigned long flags;
+
+ spin_lock_irqsave(&queue->irqlock, flags);
+ while (!list_empty(&queue->irqqueue)) {
+ buf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
+ queue);
+ list_del(&buf->queue);
+ buf->state = UVC_BUF_STATE_ERROR;
+ wake_up(&buf->wait);
+ }
+ /* This must be protected by the irqlock spinlock to avoid race
+ * conditions between uvc_queue_buffer and the disconnection event that
+ * could result in an interruptible wait in uvc_dequeue_buffer. Do not
+ * blindly replace this logic by checking for the UVC_DEV_DISCONNECTED
+ * state outside the queue code.
+ */
+ if (disconnect)
+ queue->flags |= UVC_QUEUE_DISCONNECTED;
+ spin_unlock_irqrestore(&queue->irqlock, flags);
+}
+
+/*
* Enable or disable the video buffers queue.
*
* The queue must be enabled before starting video acquisition and must be
@@ -474,7 +515,7 @@
* This function can't be called from interrupt context. Use
* uvc_queue_cancel() instead.
*/
-int uvc_queue_enable(struct uvc_video_queue *queue, int enable)
+static int uvc_queue_enable(struct uvc_video_queue *queue, int enable)
{
unsigned int i;
int ret = 0;
@@ -503,44 +544,8 @@
return ret;
}
-/*
- * Cancel the video buffers queue.
- *
- * Cancelling the queue marks all buffers on the irq queue as erroneous,
- * wakes them up and removes them from the queue.
- *
- * If the disconnect parameter is set, further calls to uvc_queue_buffer will
- * fail with -ENODEV.
- *
- * This function acquires the irq spinlock and can be called from interrupt
- * context.
- */
-void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect)
-{
- struct uvc_buffer *buf;
- unsigned long flags;
-
- spin_lock_irqsave(&queue->irqlock, flags);
- while (!list_empty(&queue->irqqueue)) {
- buf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
- queue);
- list_del(&buf->queue);
- buf->state = UVC_BUF_STATE_ERROR;
- wake_up(&buf->wait);
- }
- /* This must be protected by the irqlock spinlock to avoid race
- * conditions between uvc_queue_buffer and the disconnection event that
- * could result in an interruptible wait in uvc_dequeue_buffer. Do not
- * blindly replace this logic by checking for the UVC_DEV_DISCONNECTED
- * state outside the queue code.
- */
- if (disconnect)
- queue->flags |= UVC_QUEUE_DISCONNECTED;
- spin_unlock_irqrestore(&queue->irqlock, flags);
-}
-
-struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
- struct uvc_buffer *buf)
+static struct uvc_buffer *
+uvc_queue_next_buffer(struct uvc_video_queue *queue, struct uvc_buffer *buf)
{
struct uvc_buffer *nextbuf;
unsigned long flags;
@@ -568,7 +573,7 @@
return nextbuf;
}
-struct uvc_buffer *uvc_queue_head(struct uvc_video_queue *queue)
+static struct uvc_buffer *uvc_queue_head(struct uvc_video_queue *queue)
{
struct uvc_buffer *buf = NULL;
diff --git a/drivers/usb/gadget/uvc_queue.h b/drivers/usb/gadget/uvc_queue.h
index 7f5a33f..1812a8e 100644
--- a/drivers/usb/gadget/uvc_queue.h
+++ b/drivers/usb/gadget/uvc_queue.h
@@ -58,30 +58,10 @@
struct list_head irqqueue;
};
-extern void uvc_queue_init(struct uvc_video_queue *queue,
- enum v4l2_buf_type type);
-extern int uvc_alloc_buffers(struct uvc_video_queue *queue,
- unsigned int nbuffers, unsigned int buflength);
-extern int uvc_free_buffers(struct uvc_video_queue *queue);
-extern int uvc_query_buffer(struct uvc_video_queue *queue,
- struct v4l2_buffer *v4l2_buf);
-extern int uvc_queue_buffer(struct uvc_video_queue *queue,
- struct v4l2_buffer *v4l2_buf);
-extern int uvc_dequeue_buffer(struct uvc_video_queue *queue,
- struct v4l2_buffer *v4l2_buf, int nonblocking);
-extern int uvc_queue_enable(struct uvc_video_queue *queue, int enable);
-extern void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect);
-extern struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
- struct uvc_buffer *buf);
-extern unsigned int uvc_queue_poll(struct uvc_video_queue *queue,
- struct file *file, poll_table *wait);
-extern int uvc_queue_mmap(struct uvc_video_queue *queue,
- struct vm_area_struct *vma);
static inline int uvc_queue_streaming(struct uvc_video_queue *queue)
{
return queue->flags & UVC_QUEUE_STREAMING;
}
-extern struct uvc_buffer *uvc_queue_head(struct uvc_video_queue *queue);
#endif /* __KERNEL__ */
diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c
index a7989f2..2dcffda 100644
--- a/drivers/usb/gadget/uvc_v4l2.c
+++ b/drivers/usb/gadget/uvc_v4l2.c
@@ -363,7 +363,7 @@
return mask;
}
-struct v4l2_file_operations uvc_v4l2_fops = {
+static struct v4l2_file_operations uvc_v4l2_fops = {
.owner = THIS_MODULE,
.open = uvc_v4l2_open,
.release = uvc_v4l2_release,
diff --git a/drivers/usb/gadget/uvc_video.c b/drivers/usb/gadget/uvc_video.c
index de8cbc4..b08f354 100644
--- a/drivers/usb/gadget/uvc_video.c
+++ b/drivers/usb/gadget/uvc_video.c
@@ -271,7 +271,7 @@
* This function fills the available USB requests (listed in req_free) with
* video data from the queued buffers.
*/
-int
+static int
uvc_video_pump(struct uvc_video *video)
{
struct usb_request *req;
@@ -328,7 +328,7 @@
/*
* Enable or disable the video stream.
*/
-int
+static int
uvc_video_enable(struct uvc_video *video, int enable)
{
unsigned int i;
@@ -367,7 +367,7 @@
/*
* Initialize the UVC video stream.
*/
-int
+static int
uvc_video_init(struct uvc_video *video)
{
INIT_LIST_HEAD(&video->req_free);
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index 417fd68..f5f3030 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -28,10 +28,10 @@
#include "config.c"
#include "epautoconf.c"
-#include "f_uvc.c"
#include "uvc_queue.c"
-#include "uvc_v4l2.c"
#include "uvc_video.c"
+#include "uvc_v4l2.c"
+#include "f_uvc.c"
/* --------------------------------------------------------------------------
* Device descriptor
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index ef3e88f..a3ef2a9 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1135,7 +1135,7 @@
#ifdef CONFIG_XPS_USB_HCD_XILINX
#include "ehci-xilinx-of.c"
-#define OF_PLATFORM_DRIVER ehci_hcd_xilinx_of_driver
+#define XILINX_OF_PLATFORM_DRIVER ehci_hcd_xilinx_of_driver
#endif
#ifdef CONFIG_PLAT_ORION
@@ -1159,7 +1159,8 @@
#endif
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
+ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
+ !defined(XILINX_OF_PLATFORM_DRIVER)
#error "missing bus glue for ehci-hcd"
#endif
@@ -1213,10 +1214,20 @@
if (retval < 0)
goto clean3;
#endif
+
+#ifdef XILINX_OF_PLATFORM_DRIVER
+ retval = of_register_platform_driver(&XILINX_OF_PLATFORM_DRIVER);
+ if (retval < 0)
+ goto clean4;
+#endif
return retval;
+#ifdef XILINX_OF_PLATFORM_DRIVER
+ /* of_unregister_platform_driver(&XILINX_OF_PLATFORM_DRIVER); */
+clean4:
+#endif
#ifdef OF_PLATFORM_DRIVER
- /* of_unregister_platform_driver(&OF_PLATFORM_DRIVER); */
+ of_unregister_platform_driver(&OF_PLATFORM_DRIVER);
clean3:
#endif
#ifdef PS3_SYSTEM_BUS_DRIVER
@@ -1243,6 +1254,9 @@
static void __exit ehci_hcd_cleanup(void)
{
+#ifdef XILINX_OF_PLATFORM_DRIVER
+ of_unregister_platform_driver(&XILINX_OF_PLATFORM_DRIVER);
+#endif
#ifdef OF_PLATFORM_DRIVER
of_unregister_platform_driver(&OF_PLATFORM_DRIVER);
#endif
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index 544ccfd..bd40277 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -207,10 +207,17 @@
/* Initialize the transceiver */
if (pdata->otg) {
pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET;
- if (otg_init(pdata->otg) != 0)
- dev_err(dev, "unable to init transceiver\n");
- else if (otg_set_vbus(pdata->otg, 1) != 0)
+ ret = otg_init(pdata->otg);
+ if (ret) {
+ dev_err(dev, "unable to init transceiver, probably missing\n");
+ ret = -ENODEV;
+ goto err_add;
+ }
+ ret = otg_set_vbus(pdata->otg, 1);
+ if (ret) {
dev_err(dev, "unable to enable vbus on transceiver\n");
+ goto err_add;
+ }
}
priv->hcd = hcd;
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index 013972b..4899f45 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -151,7 +151,7 @@
static int __devinit
ehci_hcd_xilinx_of_probe(struct of_device *op, const struct of_device_id *match)
{
- struct device_node *dn = op->node;
+ struct device_node *dn = op->dev.of_node;
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
struct resource res;
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 20a0dfe..0587ad4 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2224,12 +2224,9 @@
/*-------------------------------------------------------------------------*/
-static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
+static void __isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
{
int tmp = 20;
- unsigned long flags;
-
- spin_lock_irqsave(&isp1362_hcd->lock, flags);
isp1362_write_reg16(isp1362_hcd, HCSWRES, HCSWRES_MAGIC);
isp1362_write_reg32(isp1362_hcd, HCCMDSTAT, OHCI_HCR);
@@ -2240,6 +2237,14 @@
}
if (!tmp)
pr_err("Software reset timeout\n");
+}
+
+static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&isp1362_hcd->lock, flags);
+ __isp1362_sw_reset(isp1362_hcd);
spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
}
@@ -2418,7 +2423,7 @@
if (isp1362_hcd->board && isp1362_hcd->board->reset)
isp1362_hcd->board->reset(hcd->self.controller, 1);
else
- isp1362_sw_reset(isp1362_hcd);
+ __isp1362_sw_reset(isp1362_hcd);
if (isp1362_hcd->board && isp1362_hcd->board->clock)
isp1362_hcd->board->clock(hcd->self.controller, 0);
diff --git a/drivers/usb/host/isp1362.h b/drivers/usb/host/isp1362.h
index 5151516..d995351 100644
--- a/drivers/usb/host/isp1362.h
+++ b/drivers/usb/host/isp1362.h
@@ -65,7 +65,7 @@
unsigned short *bp = (unsigned short *)buf;
while (len--) {
DUMMY_DELAY_ACCESS;
- *bp++ = inw((void *)addr);
+ *bp++ = inw(addr);
}
}
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 6db57ab..77be3c2 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -1065,7 +1065,7 @@
else if (speed == LSMODE)
rh->port |= USB_PORT_STAT_LOW_SPEED;
- rh->port &= USB_PORT_STAT_RESET;
+ rh->port &= ~USB_PORT_STAT_RESET;
rh->port |= USB_PORT_STAT_ENABLE;
}
@@ -2404,7 +2404,7 @@
del_timer_sync(&r8a66597->rh_timer);
usb_remove_hcd(hcd);
- iounmap((void *)r8a66597->reg);
+ iounmap(r8a66597->reg);
#ifdef CONFIG_HAVE_CLK
if (r8a66597->pdata->on_chip)
clk_put(r8a66597->clk);
@@ -2496,7 +2496,7 @@
init_timer(&r8a66597->rh_timer);
r8a66597->rh_timer.function = r8a66597_timer;
r8a66597->rh_timer.data = (unsigned long)r8a66597;
- r8a66597->reg = (unsigned long)reg;
+ r8a66597->reg = reg;
/* make sure no interrupts are pending */
ret = r8a66597_clock_enable(r8a66597);
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index 228e3fb..95d0f5a 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -112,7 +112,7 @@
struct r8a66597 {
spinlock_t lock;
- unsigned long reg;
+ void __iomem *reg;
#ifdef CONFIG_HAVE_CLK
struct clk *clk;
#endif
@@ -170,67 +170,67 @@
static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset)
{
- return inw(r8a66597->reg + offset);
+ return ioread16(r8a66597->reg + offset);
}
static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
unsigned long offset, u16 *buf,
int len)
{
- unsigned long fifoaddr = r8a66597->reg + offset;
+ void __iomem *fifoaddr = r8a66597->reg + offset;
unsigned long count;
if (r8a66597->pdata->on_chip) {
count = len / 4;
- insl(fifoaddr, buf, count);
+ ioread32_rep(fifoaddr, buf, count);
if (len & 0x00000003) {
- unsigned long tmp = inl(fifoaddr);
+ unsigned long tmp = ioread32(fifoaddr);
memcpy((unsigned char *)buf + count * 4, &tmp,
len & 0x03);
}
} else {
len = (len + 1) / 2;
- insw(fifoaddr, buf, len);
+ ioread16_rep(fifoaddr, buf, len);
}
}
static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
unsigned long offset)
{
- outw(val, r8a66597->reg + offset);
+ iowrite16(val, r8a66597->reg + offset);
}
static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
unsigned long offset, u16 *buf,
int len)
{
- unsigned long fifoaddr = r8a66597->reg + offset;
+ void __iomem *fifoaddr = r8a66597->reg + offset;
unsigned long count;
unsigned char *pb;
int i;
if (r8a66597->pdata->on_chip) {
count = len / 4;
- outsl(fifoaddr, buf, count);
+ iowrite32_rep(fifoaddr, buf, count);
if (len & 0x00000003) {
pb = (unsigned char *)buf + count * 4;
for (i = 0; i < (len & 0x00000003); i++) {
if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
- outb(pb[i], fifoaddr + i);
+ iowrite8(pb[i], fifoaddr + i);
else
- outb(pb[i], fifoaddr + 3 - i);
+ iowrite8(pb[i], fifoaddr + 3 - i);
}
}
} else {
int odd = len & 0x0001;
len = len / 2;
- outsw(fifoaddr, buf, len);
+ ioread16_rep(fifoaddr, buf, len);
if (unlikely(odd)) {
buf = &buf[len];
- outb((unsigned char)*buf, fifoaddr);
+ iowrite8((unsigned char)*buf, fifoaddr);
}
}
}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index edffd81..11482b6 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -78,6 +78,8 @@
xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
" endpoint cmd after reset endpoint\n");
}
+ if (pdev->vendor == PCI_VENDOR_ID_NEC)
+ xhci->quirks |= XHCI_NEC_HOST;
/* Make sure the HC is halted. */
retval = xhci_halt(xhci);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 36c858e..94e6934 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -182,8 +182,12 @@
* set, but other sections talk about dealing with the chain bit set. This was
* fixed in the 0.96 specification errata, but we have to assume that all 0.95
* xHCI hardware can't handle the chain bit being cleared on a link TRB.
+ *
+ * @more_trbs_coming: Will you enqueue more TRBs before calling
+ * prepare_transfer()?
*/
-static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
+static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
+ bool consumer, bool more_trbs_coming)
{
u32 chain;
union xhci_trb *next;
@@ -199,15 +203,28 @@
while (last_trb(xhci, ring, ring->enq_seg, next)) {
if (!consumer) {
if (ring != xhci->event_ring) {
- if (chain) {
- next->link.control |= TRB_CHAIN;
-
- /* Give this link TRB to the hardware */
- wmb();
- next->link.control ^= TRB_CYCLE;
- } else {
+ /*
+ * If the caller doesn't plan on enqueueing more
+ * TDs before ringing the doorbell, then we
+ * don't want to give the link TRB to the
+ * hardware just yet. We'll give the link TRB
+ * back in prepare_ring() just before we enqueue
+ * the TD at the top of the ring.
+ */
+ if (!chain && !more_trbs_coming)
break;
+
+ /* If we're not dealing with 0.95 hardware,
+ * carry over the chain bit of the previous TRB
+ * (which may mean the chain bit is cleared).
+ */
+ if (!xhci_link_trb_quirk(xhci)) {
+ next->link.control &= ~TRB_CHAIN;
+ next->link.control |= chain;
}
+ /* Give this link TRB to the hardware */
+ wmb();
+ next->link.control ^= TRB_CYCLE;
}
/* Toggle the cycle bit after the last ring segment. */
if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
@@ -1071,6 +1088,15 @@
xhci_warn(xhci, "Reset device command completion "
"for disabled slot %u\n", slot_id);
break;
+ case TRB_TYPE(TRB_NEC_GET_FW):
+ if (!(xhci->quirks & XHCI_NEC_HOST)) {
+ xhci->error_bitmask |= 1 << 6;
+ break;
+ }
+ xhci_dbg(xhci, "NEC firmware version %2x.%02x\n",
+ NEC_FW_MAJOR(event->status),
+ NEC_FW_MINOR(event->status));
+ break;
default:
/* Skip over unknown commands on the event ring */
xhci->error_bitmask |= 1 << 6;
@@ -1079,6 +1105,17 @@
inc_deq(xhci, xhci->cmd_ring, false);
}
+static void handle_vendor_event(struct xhci_hcd *xhci,
+ union xhci_trb *event)
+{
+ u32 trb_type;
+
+ trb_type = TRB_FIELD_TO_TYPE(event->generic.field[3]);
+ xhci_dbg(xhci, "Vendor specific event TRB type = %u\n", trb_type);
+ if (trb_type == TRB_NEC_CMD_COMP && (xhci->quirks & XHCI_NEC_HOST))
+ handle_cmd_completion(xhci, &event->event_cmd);
+}
+
static void handle_port_status(struct xhci_hcd *xhci,
union xhci_trb *event)
{
@@ -1659,7 +1696,10 @@
update_ptrs = 0;
break;
default:
- xhci->error_bitmask |= 1 << 3;
+ if ((event->event_cmd.flags & TRB_TYPE_BITMASK) >= TRB_TYPE(48))
+ handle_vendor_event(xhci, event);
+ else
+ xhci->error_bitmask |= 1 << 3;
}
/* Any of the above functions may drop and re-acquire the lock, so check
* to make sure a watchdog timer didn't mark the host as non-responsive.
@@ -1684,9 +1724,12 @@
/*
* Generic function for queueing a TRB on a ring.
* The caller must have checked to make sure there's room on the ring.
+ *
+ * @more_trbs_coming: Will you enqueue more TRBs before calling
+ * prepare_transfer()?
*/
static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
- bool consumer,
+ bool consumer, bool more_trbs_coming,
u32 field1, u32 field2, u32 field3, u32 field4)
{
struct xhci_generic_trb *trb;
@@ -1696,7 +1739,7 @@
trb->field[1] = field2;
trb->field[2] = field3;
trb->field[3] = field4;
- inc_enq(xhci, ring, consumer);
+ inc_enq(xhci, ring, consumer, more_trbs_coming);
}
/*
@@ -1965,6 +2008,7 @@
int trb_buff_len, this_sg_len, running_total;
bool first_trb;
u64 addr;
+ bool more_trbs_coming;
struct xhci_generic_trb *start_trb;
int start_cycle;
@@ -2050,7 +2094,11 @@
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);
- queue_trb(xhci, ep_ring, false,
+ if (num_trbs > 1)
+ more_trbs_coming = true;
+ else
+ more_trbs_coming = false;
+ queue_trb(xhci, ep_ring, false, more_trbs_coming,
lower_32_bits(addr),
upper_32_bits(addr),
length_field,
@@ -2101,6 +2149,7 @@
int num_trbs;
struct xhci_generic_trb *start_trb;
bool first_trb;
+ bool more_trbs_coming;
int start_cycle;
u32 field, length_field;
@@ -2189,7 +2238,11 @@
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);
- queue_trb(xhci, ep_ring, false,
+ if (num_trbs > 1)
+ more_trbs_coming = true;
+ else
+ more_trbs_coming = false;
+ queue_trb(xhci, ep_ring, false, more_trbs_coming,
lower_32_bits(addr),
upper_32_bits(addr),
length_field,
@@ -2268,7 +2321,7 @@
/* Queue setup TRB - see section 6.4.1.2.1 */
/* FIXME better way to translate setup_packet into two u32 fields? */
setup = (struct usb_ctrlrequest *) urb->setup_packet;
- queue_trb(xhci, ep_ring, false,
+ queue_trb(xhci, ep_ring, false, true,
/* FIXME endianness is probably going to bite my ass here. */
setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16,
setup->wIndex | setup->wLength << 16,
@@ -2284,7 +2337,7 @@
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType & USB_DIR_IN)
field |= TRB_DIR_IN;
- queue_trb(xhci, ep_ring, false,
+ queue_trb(xhci, ep_ring, false, true,
lower_32_bits(urb->transfer_dma),
upper_32_bits(urb->transfer_dma),
length_field,
@@ -2301,7 +2354,7 @@
field = 0;
else
field = TRB_DIR_IN;
- queue_trb(xhci, ep_ring, false,
+ queue_trb(xhci, ep_ring, false, false,
0,
0,
TRB_INTR_TARGET(0),
@@ -2338,7 +2391,7 @@
"unfailable commands failed.\n");
return -ENOMEM;
}
- queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
+ queue_trb(xhci, xhci->cmd_ring, false, false, field1, field2, field3,
field4 | xhci->cmd_ring->cycle_state);
return 0;
}
@@ -2378,6 +2431,12 @@
false);
}
+int xhci_queue_vendor_command(struct xhci_hcd *xhci,
+ u32 field1, u32 field2, u32 field3, u32 field4)
+{
+ return queue_command(xhci, field1, field2, field3, field4, false);
+}
+
/* Queue a reset device command TRB */
int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id)
{
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 40e0a0c..27345cd 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -106,6 +106,33 @@
}
/*
+ * Set the run bit and wait for the host to be running.
+ */
+int xhci_start(struct xhci_hcd *xhci)
+{
+ u32 temp;
+ int ret;
+
+ temp = xhci_readl(xhci, &xhci->op_regs->command);
+ temp |= (CMD_RUN);
+ xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
+ temp);
+ xhci_writel(xhci, temp, &xhci->op_regs->command);
+
+ /*
+ * Wait for the HCHalted Status bit to be 0 to indicate the host is
+ * running.
+ */
+ ret = handshake(xhci, &xhci->op_regs->status,
+ STS_HALT, 0, XHCI_MAX_HALT_USEC);
+ if (ret == -ETIMEDOUT)
+ xhci_err(xhci, "Host took too long to start, "
+ "waited %u microseconds.\n",
+ XHCI_MAX_HALT_USEC);
+ return ret;
+}
+
+/*
* Reset a halted HC, and set the internal HC state to HC_STATE_HALT.
*
* This resets pipelines, timers, counters, state machines, etc.
@@ -116,6 +143,7 @@
{
u32 command;
u32 state;
+ int ret;
state = xhci_readl(xhci, &xhci->op_regs->status);
if ((state & STS_HALT) == 0) {
@@ -130,7 +158,17 @@
/* XXX: Why does EHCI set this here? Shouldn't other code do this? */
xhci_to_hcd(xhci)->state = HC_STATE_HALT;
- return handshake(xhci, &xhci->op_regs->command, CMD_RESET, 0, 250 * 1000);
+ ret = handshake(xhci, &xhci->op_regs->command,
+ CMD_RESET, 0, 250 * 1000);
+ if (ret)
+ return ret;
+
+ xhci_dbg(xhci, "Wait for controller to be ready for doorbell rings\n");
+ /*
+ * xHCI cannot write to any doorbells or operational registers other
+ * than status until the "Controller Not Ready" flag is cleared.
+ */
+ return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000);
}
@@ -448,17 +486,20 @@
if (NUM_TEST_NOOPS > 0)
doorbell = xhci_setup_one_noop(xhci);
+ if (xhci->quirks & XHCI_NEC_HOST)
+ xhci_queue_vendor_command(xhci, 0, 0, 0,
+ TRB_TYPE(TRB_NEC_GET_FW));
- temp = xhci_readl(xhci, &xhci->op_regs->command);
- temp |= (CMD_RUN);
- xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
- temp);
- xhci_writel(xhci, temp, &xhci->op_regs->command);
- /* Flush PCI posted writes */
- temp = xhci_readl(xhci, &xhci->op_regs->command);
+ if (xhci_start(xhci)) {
+ xhci_halt(xhci);
+ return -ENODEV;
+ }
+
xhci_dbg(xhci, "// @%p = 0x%x\n", &xhci->op_regs->command, temp);
if (doorbell)
(*doorbell)(xhci);
+ if (xhci->quirks & XHCI_NEC_HOST)
+ xhci_ring_cmd_db(xhci);
xhci_dbg(xhci, "Finished xhci_run\n");
return 0;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index dada2fb..8b4b7d3 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -925,6 +925,7 @@
/* TRB bit mask */
#define TRB_TYPE_BITMASK (0xfc00)
#define TRB_TYPE(p) ((p) << 10)
+#define TRB_FIELD_TO_TYPE(p) (((p) & TRB_TYPE_BITMASK) >> 10)
/* TRB type IDs */
/* bulk, interrupt, isoc scatter/gather, and control data stage */
#define TRB_NORMAL 1
@@ -992,6 +993,14 @@
#define TRB_MFINDEX_WRAP 39
/* TRB IDs 40-47 reserved, 48-63 is vendor-defined */
+/* Nec vendor-specific command completion event. */
+#define TRB_NEC_CMD_COMP 48
+/* Get NEC firmware revision. */
+#define TRB_NEC_GET_FW 49
+
+#define NEC_FW_MINOR(p) (((p) >> 0) & 0xff)
+#define NEC_FW_MAJOR(p) (((p) >> 8) & 0xff)
+
/*
* TRBS_PER_SEGMENT must be a multiple of 4,
* since the command ring is 64-byte aligned.
@@ -1172,6 +1181,7 @@
unsigned int quirks;
#define XHCI_LINK_TRB_QUIRK (1 << 0)
#define XHCI_RESET_EP_QUIRK (1 << 1)
+#define XHCI_NEC_HOST (1 << 2)
};
/* For testing purposes */
@@ -1379,6 +1389,8 @@
int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id);
int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
u32 slot_id);
+int xhci_queue_vendor_command(struct xhci_hcd *xhci,
+ u32 field1, u32 field2, u32 field3, u32 field4);
int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
unsigned int ep_index);
int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index fad70bc..3b795c5 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -219,8 +219,8 @@
return 0;
}
#else
-#define musb_ulpi_read(a, b) NULL
-#define musb_ulpi_write(a, b, c) NULL
+#define musb_ulpi_read NULL
+#define musb_ulpi_write NULL
#endif
static struct otg_io_access_ops musb_ulpi_access = {
@@ -451,10 +451,6 @@
* @param power
*/
-#define STAGE0_MASK (MUSB_INTR_RESUME | MUSB_INTR_SESSREQ \
- | MUSB_INTR_VBUSERROR | MUSB_INTR_CONNECT \
- | MUSB_INTR_RESET)
-
static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
u8 devctl, u8 power)
{
@@ -642,7 +638,7 @@
handled = IRQ_HANDLED;
}
-
+#endif
if (int_usb & MUSB_INTR_SUSPEND) {
DBG(1, "SUSPEND (%s) devctl %02x power %02x\n",
otg_state_string(musb), devctl, power);
@@ -705,6 +701,7 @@
}
}
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
if (int_usb & MUSB_INTR_CONNECT) {
struct usb_hcd *hcd = musb_to_hcd(musb);
void __iomem *mbase = musb->mregs;
@@ -1597,7 +1594,7 @@
/* the core can interrupt us for multiple reasons; docs have
* a generic interrupt flowchart to follow
*/
- if (musb->int_usb & STAGE0_MASK)
+ if (musb->int_usb)
retval |= musb_stage0_irq(musb, musb->int_usb,
devctl, power);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index b22d02d..91d6779 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -470,7 +470,8 @@
struct musb_context_registers {
-#ifdef CONFIG_PM
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
u32 otg_sysconfig, otg_forcestandby;
#endif
u8 power;
@@ -484,7 +485,8 @@
struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
};
-#ifdef CONFIG_PM
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
extern void musb_platform_save_context(struct musb *musb,
struct musb_context_registers *musb_context);
extern void musb_platform_restore_context(struct musb *musb,
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 1008044..dc66e43 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -132,18 +132,9 @@
if (mode) {
csr |= 1 << MUSB_HSDMA_MODE1_SHIFT;
BUG_ON(len < packet_sz);
-
- if (packet_sz >= 64) {
- csr |= MUSB_HSDMA_BURSTMODE_INCR16
- << MUSB_HSDMA_BURSTMODE_SHIFT;
- } else if (packet_sz >= 32) {
- csr |= MUSB_HSDMA_BURSTMODE_INCR8
- << MUSB_HSDMA_BURSTMODE_SHIFT;
- } else if (packet_sz >= 16) {
- csr |= MUSB_HSDMA_BURSTMODE_INCR4
- << MUSB_HSDMA_BURSTMODE_SHIFT;
- }
}
+ csr |= MUSB_HSDMA_BURSTMODE_INCR16
+ << MUSB_HSDMA_BURSTMODE_SHIFT;
csr |= (musb_channel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT)
| (1 << MUSB_HSDMA_ENABLE_SHIFT)
diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c
index b1b3469..d331b22 100644
--- a/drivers/usb/otg/ulpi.c
+++ b/drivers/usb/otg/ulpi.c
@@ -59,12 +59,17 @@
static int ulpi_init(struct otg_transceiver *otg)
{
- int i, vid, pid;
+ int i, vid, pid, ret;
+ u32 ulpi_id = 0;
- vid = (otg_io_read(otg, ULPI_VENDOR_ID_HIGH) << 8) |
- otg_io_read(otg, ULPI_VENDOR_ID_LOW);
- pid = (otg_io_read(otg, ULPI_PRODUCT_ID_HIGH) << 8) |
- otg_io_read(otg, ULPI_PRODUCT_ID_LOW);
+ for (i = 0; i < 4; i++) {
+ ret = otg_io_read(otg, ULPI_PRODUCT_ID_HIGH - i);
+ if (ret < 0)
+ return ret;
+ ulpi_id = (ulpi_id << 8) | ret;
+ }
+ vid = ulpi_id & 0xffff;
+ pid = ulpi_id >> 16;
pr_info("ULPI transceiver vendor/product ID 0x%04x/0x%04x\n", vid, pid);
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 3edda3e..fd35f73 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -1239,8 +1239,7 @@
/* port and serial sanity check */
if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
- dev_err(&port->dev,
- "%s: port or port->private is NULL, status=%d\n",
+ pr_err("%s: port or port->private is NULL, status=%d\n",
__func__, status);
return;
}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 050211a..da7e334 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -653,7 +653,6 @@
{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) },
- { USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
@@ -2005,6 +2004,8 @@
"urb failed to set to rts/cts flow control\n");
}
+ /* raise DTR/RTS */
+ set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
} else {
/*
* Xon/Xoff code
@@ -2052,6 +2053,8 @@
}
}
+ /* lower DTR/RTS */
+ clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
}
return;
}
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 94d86c3..bbc159a 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -501,13 +501,6 @@
#define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */
/*
- * Contec products (http://www.contec.com)
- * Submitted by Daniel Sangorrin
- */
-#define CONTEC_VID 0x06CE /* Vendor ID */
-#define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */
-
-/*
* Definitions for B&B Electronics products.
*/
#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index f8424d1..585b7e6 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -730,7 +730,6 @@
mos7840_port = urb->context;
if (!mos7840_port) {
dbg("%s", "NULL mos7840_port pointer");
- mos7840_port->read_urb_busy = false;
return;
}
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 04bb759..93d72eb 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -139,6 +139,7 @@
"Could not set interface, error %d\n",
retval);
retval = -ENODEV;
+ kfree(data);
}
return retval;
}
@@ -155,6 +156,7 @@
"Could not set interface, error %d\n",
retval);
retval = -ENODEV;
+ kfree(data);
}
return retval;
}
@@ -163,6 +165,7 @@
default:
dev_err(&serial->dev->dev,
"unknown number of interfaces: %d\n", nintf);
+ kfree(data);
return -ENODEV;
}
diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index aa88911..d219070 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -98,7 +98,8 @@
static void handle_tx(struct vhost_net *net)
{
struct vhost_virtqueue *vq = &net->dev.vqs[VHOST_NET_VQ_TX];
- unsigned head, out, in, s;
+ unsigned out, in, s;
+ int head;
struct msghdr msg = {
.msg_name = NULL,
.msg_namelen = 0,
@@ -135,6 +136,9 @@
ARRAY_SIZE(vq->iov),
&out, &in,
NULL, NULL);
+ /* On error, stop handling until the next kick. */
+ if (unlikely(head < 0))
+ break;
/* Nothing new? Wait for eventfd to tell us they refilled. */
if (head == vq->num) {
wmem = atomic_read(&sock->sk->sk_wmem_alloc);
@@ -173,8 +177,8 @@
break;
}
if (err != len)
- pr_err("Truncated TX packet: "
- " len %d != %zd\n", err, len);
+ pr_debug("Truncated TX packet: "
+ " len %d != %zd\n", err, len);
vhost_add_used_and_signal(&net->dev, vq, head, 0);
total_len += len;
if (unlikely(total_len >= VHOST_NET_WEIGHT)) {
@@ -192,7 +196,8 @@
static void handle_rx(struct vhost_net *net)
{
struct vhost_virtqueue *vq = &net->dev.vqs[VHOST_NET_VQ_RX];
- unsigned head, out, in, log, s;
+ unsigned out, in, log, s;
+ int head;
struct vhost_log *vq_log;
struct msghdr msg = {
.msg_name = NULL,
@@ -228,6 +233,9 @@
ARRAY_SIZE(vq->iov),
&out, &in,
vq_log, &log);
+ /* On error, stop handling until the next kick. */
+ if (unlikely(head < 0))
+ break;
/* OK, now we need to know about added descriptors. */
if (head == vq->num) {
if (unlikely(vhost_enable_notify(vq))) {
@@ -267,8 +275,8 @@
}
/* TODO: Should check and handle checksum. */
if (err > len) {
- pr_err("Discarded truncated rx packet: "
- " len %d > %zd\n", err, len);
+ pr_debug("Discarded truncated rx packet: "
+ " len %d > %zd\n", err, len);
vhost_discard_vq_desc(vq);
continue;
}
@@ -526,11 +534,16 @@
rcu_assign_pointer(vq->private_data, sock);
vhost_net_enable_vq(n, vq);
done:
+ mutex_unlock(&vq->mutex);
+
if (oldsock) {
vhost_net_flush_vq(n, index);
fput(oldsock->file);
}
+ mutex_unlock(&n->dev.mutex);
+ return 0;
+
err_vq:
mutex_unlock(&vq->mutex);
err:
@@ -593,17 +606,17 @@
int r;
switch (ioctl) {
case VHOST_NET_SET_BACKEND:
- r = copy_from_user(&backend, argp, sizeof backend);
- if (r < 0)
- return r;
+ if (copy_from_user(&backend, argp, sizeof backend))
+ return -EFAULT;
return vhost_net_set_backend(n, backend.index, backend.fd);
case VHOST_GET_FEATURES:
features = VHOST_FEATURES;
- return copy_to_user(featurep, &features, sizeof features);
+ if (copy_to_user(featurep, &features, sizeof features))
+ return -EFAULT;
+ return 0;
case VHOST_SET_FEATURES:
- r = copy_from_user(&features, featurep, sizeof features);
- if (r < 0)
- return r;
+ if (copy_from_user(&features, featurep, sizeof features))
+ return -EFAULT;
if (features & ~VHOST_FEATURES)
return -EOPNOTSUPP;
return vhost_net_set_features(n, features);
@@ -637,7 +650,7 @@
};
static struct miscdevice vhost_net_misc = {
- VHOST_NET_MINOR,
+ MISC_DYNAMIC_MINOR,
"vhost-net",
&vhost_net_fops,
};
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index c6fb8e9..0b99783 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -320,10 +320,8 @@
{
struct vhost_memory mem, *newmem, *oldmem;
unsigned long size = offsetof(struct vhost_memory, regions);
- long r;
- r = copy_from_user(&mem, m, size);
- if (r)
- return r;
+ if (copy_from_user(&mem, m, size))
+ return -EFAULT;
if (mem.padding)
return -EOPNOTSUPP;
if (mem.nregions > VHOST_MEMORY_MAX_NREGIONS)
@@ -333,15 +331,16 @@
return -ENOMEM;
memcpy(newmem, &mem, size);
- r = copy_from_user(newmem->regions, m->regions,
- mem.nregions * sizeof *m->regions);
- if (r) {
+ if (copy_from_user(newmem->regions, m->regions,
+ mem.nregions * sizeof *m->regions)) {
kfree(newmem);
- return r;
+ return -EFAULT;
}
- if (!memory_access_ok(d, newmem, vhost_has_feature(d, VHOST_F_LOG_ALL)))
+ if (!memory_access_ok(d, newmem, vhost_has_feature(d, VHOST_F_LOG_ALL))) {
+ kfree(newmem);
return -EFAULT;
+ }
oldmem = d->memory;
rcu_assign_pointer(d->memory, newmem);
synchronize_rcu();
@@ -374,7 +373,7 @@
r = get_user(idx, idxp);
if (r < 0)
return r;
- if (idx > d->nvqs)
+ if (idx >= d->nvqs)
return -ENOBUFS;
vq = d->vqs + idx;
@@ -389,9 +388,10 @@
r = -EBUSY;
break;
}
- r = copy_from_user(&s, argp, sizeof s);
- if (r < 0)
+ if (copy_from_user(&s, argp, sizeof s)) {
+ r = -EFAULT;
break;
+ }
if (!s.num || s.num > 0xffff || (s.num & (s.num - 1))) {
r = -EINVAL;
break;
@@ -405,9 +405,10 @@
r = -EBUSY;
break;
}
- r = copy_from_user(&s, argp, sizeof s);
- if (r < 0)
+ if (copy_from_user(&s, argp, sizeof s)) {
+ r = -EFAULT;
break;
+ }
if (s.num > 0xffff) {
r = -EINVAL;
break;
@@ -419,12 +420,14 @@
case VHOST_GET_VRING_BASE:
s.index = idx;
s.num = vq->last_avail_idx;
- r = copy_to_user(argp, &s, sizeof s);
+ if (copy_to_user(argp, &s, sizeof s))
+ r = -EFAULT;
break;
case VHOST_SET_VRING_ADDR:
- r = copy_from_user(&a, argp, sizeof a);
- if (r < 0)
+ if (copy_from_user(&a, argp, sizeof a)) {
+ r = -EFAULT;
break;
+ }
if (a.flags & ~(0x1 << VHOST_VRING_F_LOG)) {
r = -EOPNOTSUPP;
break;
@@ -477,9 +480,10 @@
vq->used = (void __user *)(unsigned long)a.used_user_addr;
break;
case VHOST_SET_VRING_KICK:
- r = copy_from_user(&f, argp, sizeof f);
- if (r < 0)
+ if (copy_from_user(&f, argp, sizeof f)) {
+ r = -EFAULT;
break;
+ }
eventfp = f.fd == -1 ? NULL : eventfd_fget(f.fd);
if (IS_ERR(eventfp)) {
r = PTR_ERR(eventfp);
@@ -492,9 +496,10 @@
filep = eventfp;
break;
case VHOST_SET_VRING_CALL:
- r = copy_from_user(&f, argp, sizeof f);
- if (r < 0)
+ if (copy_from_user(&f, argp, sizeof f)) {
+ r = -EFAULT;
break;
+ }
eventfp = f.fd == -1 ? NULL : eventfd_fget(f.fd);
if (IS_ERR(eventfp)) {
r = PTR_ERR(eventfp);
@@ -510,9 +515,10 @@
filep = eventfp;
break;
case VHOST_SET_VRING_ERR:
- r = copy_from_user(&f, argp, sizeof f);
- if (r < 0)
+ if (copy_from_user(&f, argp, sizeof f)) {
+ r = -EFAULT;
break;
+ }
eventfp = f.fd == -1 ? NULL : eventfd_fget(f.fd);
if (IS_ERR(eventfp)) {
r = PTR_ERR(eventfp);
@@ -575,9 +581,10 @@
r = vhost_set_memory(d, argp);
break;
case VHOST_SET_LOG_BASE:
- r = copy_from_user(&p, argp, sizeof p);
- if (r < 0)
+ if (copy_from_user(&p, argp, sizeof p)) {
+ r = -EFAULT;
break;
+ }
if ((u64)(unsigned long)p != p) {
r = -EFAULT;
break;
@@ -729,12 +736,12 @@
mem = rcu_dereference(dev->memory);
while ((u64)len > s) {
u64 size;
- if (ret >= iov_size) {
+ if (unlikely(ret >= iov_size)) {
ret = -ENOBUFS;
break;
}
reg = find_region(mem, addr, len);
- if (!reg) {
+ if (unlikely(!reg)) {
ret = -EFAULT;
break;
}
@@ -773,18 +780,18 @@
return next;
}
-static unsigned get_indirect(struct vhost_dev *dev, struct vhost_virtqueue *vq,
- struct iovec iov[], unsigned int iov_size,
- unsigned int *out_num, unsigned int *in_num,
- struct vhost_log *log, unsigned int *log_num,
- struct vring_desc *indirect)
+static int get_indirect(struct vhost_dev *dev, struct vhost_virtqueue *vq,
+ struct iovec iov[], unsigned int iov_size,
+ unsigned int *out_num, unsigned int *in_num,
+ struct vhost_log *log, unsigned int *log_num,
+ struct vring_desc *indirect)
{
struct vring_desc desc;
unsigned int i = 0, count, found = 0;
int ret;
/* Sanity check */
- if (indirect->len % sizeof desc) {
+ if (unlikely(indirect->len % sizeof desc)) {
vq_err(vq, "Invalid length in indirect descriptor: "
"len 0x%llx not multiple of 0x%zx\n",
(unsigned long long)indirect->len,
@@ -794,7 +801,7 @@
ret = translate_desc(dev, indirect->addr, indirect->len, vq->indirect,
ARRAY_SIZE(vq->indirect));
- if (ret < 0) {
+ if (unlikely(ret < 0)) {
vq_err(vq, "Translation failure %d in indirect.\n", ret);
return ret;
}
@@ -806,7 +813,7 @@
count = indirect->len / sizeof desc;
/* Buffers are chained via a 16 bit next field, so
* we can have at most 2^16 of these. */
- if (count > USHRT_MAX + 1) {
+ if (unlikely(count > USHRT_MAX + 1)) {
vq_err(vq, "Indirect buffer length too big: %d\n",
indirect->len);
return -E2BIG;
@@ -814,19 +821,19 @@
do {
unsigned iov_count = *in_num + *out_num;
- if (++found > count) {
+ if (unlikely(++found > count)) {
vq_err(vq, "Loop detected: last one at %u "
"indirect size %u\n",
i, count);
return -EINVAL;
}
- if (memcpy_fromiovec((unsigned char *)&desc, vq->indirect,
- sizeof desc)) {
+ if (unlikely(memcpy_fromiovec((unsigned char *)&desc, vq->indirect,
+ sizeof desc))) {
vq_err(vq, "Failed indirect descriptor: idx %d, %zx\n",
i, (size_t)indirect->addr + i * sizeof desc);
return -EINVAL;
}
- if (desc.flags & VRING_DESC_F_INDIRECT) {
+ if (unlikely(desc.flags & VRING_DESC_F_INDIRECT)) {
vq_err(vq, "Nested indirect descriptor: idx %d, %zx\n",
i, (size_t)indirect->addr + i * sizeof desc);
return -EINVAL;
@@ -834,7 +841,7 @@
ret = translate_desc(dev, desc.addr, desc.len, iov + iov_count,
iov_size - iov_count);
- if (ret < 0) {
+ if (unlikely(ret < 0)) {
vq_err(vq, "Translation failure %d indirect idx %d\n",
ret, i);
return ret;
@@ -850,7 +857,7 @@
} else {
/* If it's an output descriptor, they're all supposed
* to come before any input descriptors. */
- if (*in_num) {
+ if (unlikely(*in_num)) {
vq_err(vq, "Indirect descriptor "
"has out after in: idx %d\n", i);
return -EINVAL;
@@ -866,12 +873,13 @@
* number of output then some number of input descriptors, it's actually two
* iovecs, but we pack them into one and note how many of each there were.
*
- * This function returns the descriptor number found, or vq->num (which
- * is never a valid descriptor number) if none was found. */
-unsigned vhost_get_vq_desc(struct vhost_dev *dev, struct vhost_virtqueue *vq,
- struct iovec iov[], unsigned int iov_size,
- unsigned int *out_num, unsigned int *in_num,
- struct vhost_log *log, unsigned int *log_num)
+ * This function returns the descriptor number found, or vq->num (which is
+ * never a valid descriptor number) if none was found. A negative code is
+ * returned on error. */
+int vhost_get_vq_desc(struct vhost_dev *dev, struct vhost_virtqueue *vq,
+ struct iovec iov[], unsigned int iov_size,
+ unsigned int *out_num, unsigned int *in_num,
+ struct vhost_log *log, unsigned int *log_num)
{
struct vring_desc desc;
unsigned int i, head, found = 0;
@@ -880,16 +888,16 @@
/* Check it isn't doing very strange things with descriptor numbers. */
last_avail_idx = vq->last_avail_idx;
- if (get_user(vq->avail_idx, &vq->avail->idx)) {
+ if (unlikely(get_user(vq->avail_idx, &vq->avail->idx))) {
vq_err(vq, "Failed to access avail idx at %p\n",
&vq->avail->idx);
- return vq->num;
+ return -EFAULT;
}
- if ((u16)(vq->avail_idx - last_avail_idx) > vq->num) {
+ if (unlikely((u16)(vq->avail_idx - last_avail_idx) > vq->num)) {
vq_err(vq, "Guest moved used index from %u to %u",
last_avail_idx, vq->avail_idx);
- return vq->num;
+ return -EFAULT;
}
/* If there's nothing new since last we looked, return invalid. */
@@ -901,18 +909,19 @@
/* Grab the next descriptor number they're advertising, and increment
* the index we've seen. */
- if (get_user(head, &vq->avail->ring[last_avail_idx % vq->num])) {
+ if (unlikely(get_user(head,
+ &vq->avail->ring[last_avail_idx % vq->num]))) {
vq_err(vq, "Failed to read head: idx %d address %p\n",
last_avail_idx,
&vq->avail->ring[last_avail_idx % vq->num]);
- return vq->num;
+ return -EFAULT;
}
/* If their number is silly, that's an error. */
- if (head >= vq->num) {
+ if (unlikely(head >= vq->num)) {
vq_err(vq, "Guest says index %u > %u is available",
head, vq->num);
- return vq->num;
+ return -EINVAL;
}
/* When we start there are none of either input nor output. */
@@ -923,41 +932,41 @@
i = head;
do {
unsigned iov_count = *in_num + *out_num;
- if (i >= vq->num) {
+ if (unlikely(i >= vq->num)) {
vq_err(vq, "Desc index is %u > %u, head = %u",
i, vq->num, head);
- return vq->num;
+ return -EINVAL;
}
- if (++found > vq->num) {
+ if (unlikely(++found > vq->num)) {
vq_err(vq, "Loop detected: last one at %u "
"vq size %u head %u\n",
i, vq->num, head);
- return vq->num;
+ return -EINVAL;
}
ret = copy_from_user(&desc, vq->desc + i, sizeof desc);
- if (ret) {
+ if (unlikely(ret)) {
vq_err(vq, "Failed to get descriptor: idx %d addr %p\n",
i, vq->desc + i);
- return vq->num;
+ return -EFAULT;
}
if (desc.flags & VRING_DESC_F_INDIRECT) {
ret = get_indirect(dev, vq, iov, iov_size,
out_num, in_num,
log, log_num, &desc);
- if (ret < 0) {
+ if (unlikely(ret < 0)) {
vq_err(vq, "Failure detected "
"in indirect descriptor at idx %d\n", i);
- return vq->num;
+ return ret;
}
continue;
}
ret = translate_desc(dev, desc.addr, desc.len, iov + iov_count,
iov_size - iov_count);
- if (ret < 0) {
+ if (unlikely(ret < 0)) {
vq_err(vq, "Translation failure %d descriptor idx %d\n",
ret, i);
- return vq->num;
+ return ret;
}
if (desc.flags & VRING_DESC_F_WRITE) {
/* If this is an input descriptor,
@@ -971,10 +980,10 @@
} else {
/* If it's an output descriptor, they're all supposed
* to come before any input descriptors. */
- if (*in_num) {
+ if (unlikely(*in_num)) {
vq_err(vq, "Descriptor has out after in: "
"idx %d\n", i);
- return vq->num;
+ return -EINVAL;
}
*out_num += ret;
}
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index 44591ba..11ee13d 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -120,10 +120,10 @@
int vhost_vq_access_ok(struct vhost_virtqueue *vq);
int vhost_log_access_ok(struct vhost_dev *);
-unsigned vhost_get_vq_desc(struct vhost_dev *, struct vhost_virtqueue *,
- struct iovec iov[], unsigned int iov_count,
- unsigned int *out_num, unsigned int *in_num,
- struct vhost_log *log, unsigned int *log_num);
+int vhost_get_vq_desc(struct vhost_dev *, struct vhost_virtqueue *,
+ struct iovec iov[], unsigned int iov_count,
+ unsigned int *out_num, unsigned int *in_num,
+ struct vhost_log *log, unsigned int *log_num);
void vhost_discard_vq_desc(struct vhost_virtqueue *);
int vhost_add_used(struct vhost_virtqueue *, unsigned int head, int len);
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 1e6fec4..3d94a14 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -8,6 +8,9 @@
config HAVE_FB_ATMEL
bool
+config HAVE_FB_IMX
+ bool
+
source "drivers/char/agp/Kconfig"
source "drivers/gpu/vga/Kconfig"
@@ -400,9 +403,6 @@
If you plan to use the LCD display with your SA-1100 system, say
Y here.
-config HAVE_FB_IMX
- bool
-
config FB_IMX
tristate "Motorola i.MX LCD support"
depends on FB && (HAVE_FB_IMX || ARCH_MX1 || ARCH_MX2)
diff --git a/drivers/video/aty/mach64_accel.c b/drivers/video/aty/mach64_accel.c
index 51fcc0a..e45833c 100644
--- a/drivers/video/aty/mach64_accel.c
+++ b/drivers/video/aty/mach64_accel.c
@@ -242,7 +242,7 @@
void atyfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
{
struct atyfb_par *par = (struct atyfb_par *) info->par;
- u32 color = rect->color, dx = rect->dx, width = rect->width, rotation = 0;
+ u32 color, dx = rect->dx, width = rect->width, rotation = 0;
if (par->asleep)
return;
@@ -253,8 +253,11 @@
return;
}
- color |= (rect->color << 8);
- color |= (rect->color << 16);
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
+ info->fix.visual == FB_VISUAL_DIRECTCOLOR)
+ color = ((u32 *)(info->pseudo_palette))[rect->color];
+ else
+ color = rect->color;
if (info->var.bits_per_pixel == 24) {
/* In 24 bpp, the engine is in 8 bpp - this requires that all */
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index 515cf19..c4e1764 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -2872,7 +2872,7 @@
}
#if 0
- /* Power down TV DAC, taht saves a significant amount of power,
+ /* Power down TV DAC, that saves a significant amount of power,
* we'll have something better once we actually have some TVOut
* support
*/
diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c
index 68d2518..38ffc3f 100644
--- a/drivers/video/backlight/88pm860x_bl.c
+++ b/drivers/video/backlight/88pm860x_bl.c
@@ -222,6 +222,7 @@
data->port = __check_device(pdata, name);
if (data->port < 0) {
dev_err(&pdev->dev, "wrong platform data is assigned");
+ kfree(data);
return -EINVAL;
}
@@ -266,6 +267,7 @@
backlight_update_status(bl);
return 0;
out:
+ backlight_device_unregister(bl);
kfree(data);
return ret;
}
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index c025c84..e54a337 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -8,12 +8,13 @@
Enable this to be able to choose the drivers for controlling the
backlight and the LCD panel on some platforms, for example on PDAs.
+if BACKLIGHT_LCD_SUPPORT
+
#
# LCD
#
config LCD_CLASS_DEVICE
tristate "Lowlevel LCD controls"
- depends on BACKLIGHT_LCD_SUPPORT
default m
help
This framework adds support for low-level control of LCD.
@@ -24,31 +25,32 @@
To have support for your specific LCD panel you will have to
select the proper drivers which depend on this option.
+if LCD_CLASS_DEVICE
+
config LCD_CORGI
tristate "LCD Panel support for SHARP corgi/spitz model"
- depends on LCD_CLASS_DEVICE && SPI_MASTER && PXA_SHARPSL
+ depends on SPI_MASTER && PXA_SHARPSL
help
Say y here to support the LCD panels usually found on SHARP
corgi (C7x0) and spitz (Cxx00) models.
config LCD_L4F00242T03
tristate "Epson L4F00242T03 LCD"
- depends on LCD_CLASS_DEVICE && SPI_MASTER && GENERIC_GPIO
+ depends on SPI_MASTER && GENERIC_GPIO
help
SPI driver for Epson L4F00242T03. This provides basic support
for init and powering the LCD up/down through a sysfs interface.
config LCD_LMS283GF05
tristate "Samsung LMS283GF05 LCD"
- depends on LCD_CLASS_DEVICE && SPI_MASTER && GENERIC_GPIO
+ depends on SPI_MASTER && GENERIC_GPIO
help
SPI driver for Samsung LMS283GF05. This provides basic support
for powering the LCD up/down through a sysfs interface.
config LCD_LTV350QV
tristate "Samsung LTV350QV LCD Panel"
- depends on LCD_CLASS_DEVICE && SPI_MASTER
- default n
+ depends on SPI_MASTER
help
If you have a Samsung LTV350QV LCD panel, say y to include a
power control driver for it. The panel starts up in power
@@ -59,60 +61,61 @@
config LCD_ILI9320
tristate
- depends on LCD_CLASS_DEVICE && BACKLIGHT_LCD_SUPPORT
- default n
help
If you have a panel based on the ILI9320 controller chip
then say y to include a power driver for it.
config LCD_TDO24M
tristate "Toppoly TDO24M and TDO35S LCD Panels support"
- depends on LCD_CLASS_DEVICE && SPI_MASTER
- default n
+ depends on SPI_MASTER
help
If you have a Toppoly TDO24M/TDO35S series LCD panel, say y here to
include the support for it.
config LCD_VGG2432A4
tristate "VGG2432A4 LCM device support"
- depends on BACKLIGHT_LCD_SUPPORT && LCD_CLASS_DEVICE && SPI_MASTER
+ depends on SPI_MASTER
select LCD_ILI9320
- default n
help
If you have a VGG2432A4 panel based on the ILI9320 controller chip
then say y to include a power driver for it.
config LCD_PLATFORM
tristate "Platform LCD controls"
- depends on LCD_CLASS_DEVICE
help
This driver provides a platform-device registered LCD power
control interface.
config LCD_TOSA
tristate "Sharp SL-6000 LCD Driver"
- depends on LCD_CLASS_DEVICE && SPI
- depends on MACH_TOSA
- default n
+ depends on SPI && MACH_TOSA
help
If you have an Sharp SL-6000 Zaurus say Y to enable a driver
for its LCD.
config LCD_HP700
tristate "HP Jornada 700 series LCD Driver"
- depends on LCD_CLASS_DEVICE
depends on SA1100_JORNADA720_SSP && !PREEMPT
default y
help
If you have an HP Jornada 700 series handheld (710/720/728)
say Y to enable LCD control driver.
+config LCD_S6E63M0
+ tristate "S6E63M0 AMOLED LCD Driver"
+ depends on SPI && BACKLIGHT_CLASS_DEVICE
+ default n
+ help
+ If you have an S6E63M0 LCD Panel, say Y to enable its
+ LCD control driver.
+
+endif # LCD_CLASS_DEVICE
+
#
# Backlight
#
config BACKLIGHT_CLASS_DEVICE
tristate "Lowlevel Backlight controls"
- depends on BACKLIGHT_LCD_SUPPORT
default m
help
This framework adds support for low-level control of the LCD
@@ -121,9 +124,11 @@
To have support for your specific LCD panel you will have to
select the proper drivers which depend on this option.
+if BACKLIGHT_CLASS_DEVICE
+
config BACKLIGHT_ATMEL_LCDC
bool "Atmel LCDC Contrast-as-Backlight control"
- depends on BACKLIGHT_CLASS_DEVICE && FB_ATMEL
+ depends on FB_ATMEL
default y if MACH_SAM9261EK || MACH_SAM9G10EK || MACH_SAM9263EK
help
This provides a backlight control internal to the Atmel LCDC
@@ -136,8 +141,7 @@
config BACKLIGHT_ATMEL_PWM
tristate "Atmel PWM backlight control"
- depends on BACKLIGHT_CLASS_DEVICE && ATMEL_PWM
- default n
+ depends on ATMEL_PWM
help
Say Y here if you want to use the PWM peripheral in Atmel AT91 and
AVR32 devices. This driver will need additional platform data to know
@@ -146,9 +150,18 @@
To compile this driver as a module, choose M here: the module will be
called atmel-pwm-bl.
+config BACKLIGHT_EP93XX
+ tristate "Cirrus EP93xx Backlight Driver"
+ depends on FB_EP93XX
+ help
+ If you have a LCD backlight connected to the BRIGHT output of
+ the EP93xx, say Y here to enable this driver.
+
+ To compile this driver as a module, choose M here: the module will
+ be called ep93xx_bl.
+
config BACKLIGHT_GENERIC
tristate "Generic (aka Sharp Corgi) Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE
default y
help
Say y to enable the generic platform backlight driver previously
@@ -157,7 +170,7 @@
config BACKLIGHT_LOCOMO
tristate "Sharp LOCOMO LCD/Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE && SHARP_LOCOMO
+ depends on SHARP_LOCOMO
default y
help
If you have a Sharp Zaurus SL-5500 (Collie) or SL-5600 (Poodle) say y to
@@ -165,7 +178,7 @@
config BACKLIGHT_OMAP1
tristate "OMAP1 PWL-based LCD Backlight"
- depends on BACKLIGHT_CLASS_DEVICE && ARCH_OMAP1
+ depends on ARCH_OMAP1
default y
help
This driver controls the LCD backlight level and power for
@@ -174,7 +187,7 @@
config BACKLIGHT_HP680
tristate "HP Jornada 680 Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE && SH_HP6XX
+ depends on SH_HP6XX
default y
help
If you have a HP Jornada 680, say y to enable the
@@ -182,7 +195,6 @@
config BACKLIGHT_HP700
tristate "HP Jornada 700 series Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE
depends on SA1100_JORNADA720_SSP && !PREEMPT
default y
help
@@ -191,76 +203,70 @@
config BACKLIGHT_PROGEAR
tristate "Frontpath ProGear Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE && PCI && X86
- default n
+ depends on PCI && X86
help
If you have a Frontpath ProGear say Y to enable the
backlight driver.
config BACKLIGHT_CARILLO_RANCH
tristate "Intel Carillo Ranch Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE && LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578
- default n
+ depends on LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578
help
If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
backlight driver.
config BACKLIGHT_PWM
tristate "Generic PWM based Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE && HAVE_PWM
+ depends on HAVE_PWM
help
If you have a LCD backlight adjustable by PWM, say Y to enable
this driver.
config BACKLIGHT_DA903X
tristate "Backlight Driver for DA9030/DA9034 using WLED"
- depends on BACKLIGHT_CLASS_DEVICE && PMIC_DA903X
+ depends on PMIC_DA903X
help
If you have a LCD backlight connected to the WLED output of DA9030
or DA9034 WLED output, say Y here to enable this driver.
config BACKLIGHT_MAX8925
tristate "Backlight driver for MAX8925"
- depends on BACKLIGHT_CLASS_DEVICE && MFD_MAX8925
+ depends on MFD_MAX8925
help
If you have a LCD backlight connected to the WLED output of MAX8925
WLED output, say Y here to enable this driver.
config BACKLIGHT_MBP_NVIDIA
tristate "MacBook Pro Nvidia Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE && X86
- default n
+ depends on X86
help
If you have an Apple Macbook Pro with Nvidia graphics hardware say Y
to enable a driver for its backlight
config BACKLIGHT_TOSA
tristate "Sharp SL-6000 Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE && I2C
- depends on MACH_TOSA && LCD_TOSA
- default n
+ depends on I2C && MACH_TOSA && LCD_TOSA
help
If you have an Sharp SL-6000 Zaurus say Y to enable a driver
for its backlight
config BACKLIGHT_SAHARA
tristate "Tabletkiosk Sahara Touch-iT Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE && X86
- default n
+ depends on X86
help
If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
backlight driver.
config BACKLIGHT_WM831X
tristate "WM831x PMIC Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE && MFD_WM831X
+ depends on MFD_WM831X
help
If you have a backlight driven by the ISINK and DCDC of a
WM831x PMIC say y to enable the backlight driver for it.
config BACKLIGHT_ADX
tristate "Avionic Design Xanthos Backlight Driver"
- depends on BACKLIGHT_CLASS_DEVICE && ARCH_PXA_ADX
+ depends on ARCH_PXA_ADX
default y
help
Say Y to enable the backlight driver on Avionic Design Xanthos-based
@@ -268,7 +274,7 @@
config BACKLIGHT_ADP5520
tristate "Backlight Driver for ADP5520/ADP5501 using WLED"
- depends on BACKLIGHT_CLASS_DEVICE && PMIC_ADP5520
+ depends on PMIC_ADP5520
help
If you have a LCD backlight connected to the BST/BL_SNK output of
ADP5520 or ADP5501, say Y here to enable this driver.
@@ -276,9 +282,31 @@
To compile this driver as a module, choose M here: the module will
be called adp5520_bl.
+config BACKLIGHT_ADP8860
+ tristate "Backlight Driver for ADP8860/ADP8861/ADP8863 using WLED"
+ depends on BACKLIGHT_CLASS_DEVICE && I2C
+ select NEW_LEDS
+ select LEDS_CLASS
+ help
+ If you have a LCD backlight connected to the ADP8860, ADP8861 or
+ ADP8863 say Y here to enable this driver.
+
+ To compile this driver as a module, choose M here: the module will
+ be called adp8860_bl.
+
config BACKLIGHT_88PM860X
tristate "Backlight Driver for 88PM8606 using WLED"
- depends on BACKLIGHT_CLASS_DEVICE && MFD_88PM860X
+ depends on MFD_88PM860X
help
Say Y to enable the backlight driver for Marvell 88PM8606.
+config BACKLIGHT_PCF50633
+ tristate "Backlight driver for NXP PCF50633 MFD"
+ depends on BACKLIGHT_CLASS_DEVICE && MFD_PCF50633
+ help
+ If you have a backlight driven by a NXP PCF50633 MFD, say Y here to
+ enable its driver.
+
+endif # BACKLIGHT_CLASS_DEVICE
+
+endif # BACKLIGHT_LCD_SUPPORT
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 09d1f14..44c0f81 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -11,9 +11,11 @@
obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o
obj-$(CONFIG_LCD_TDO24M) += tdo24m.o
obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o
+obj-$(CONFIG_LCD_S6E63M0) += s6e63m0.o
obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
+obj-$(CONFIG_BACKLIGHT_EP93XX) += ep93xx_bl.o
obj-$(CONFIG_BACKLIGHT_GENERIC) += generic_bl.o
obj-$(CONFIG_BACKLIGHT_HP700) += jornada720_bl.o
obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
@@ -30,5 +32,7 @@
obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o
obj-$(CONFIG_BACKLIGHT_ADX) += adx_bl.o
obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o
+obj-$(CONFIG_BACKLIGHT_ADP8860) += adp8860_bl.o
obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o
+obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
diff --git a/drivers/video/backlight/adp8860_bl.c b/drivers/video/backlight/adp8860_bl.c
new file mode 100644
index 0000000..3ec2460
--- /dev/null
+++ b/drivers/video/backlight/adp8860_bl.c
@@ -0,0 +1,836 @@
+/*
+ * Backlight driver for Analog Devices ADP8860 Backlight Devices
+ *
+ * Copyright 2009-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#include <linux/i2c/adp8860.h>
+#define ADP8860_EXT_FEATURES
+#define ADP8860_USE_LEDS
+
+#define ADP8860_MFDVID 0x00 /* Manufacturer and device ID */
+#define ADP8860_MDCR 0x01 /* Device mode and status */
+#define ADP8860_MDCR2 0x02 /* Device mode and Status Register 2 */
+#define ADP8860_INTR_EN 0x03 /* Interrupts enable */
+#define ADP8860_CFGR 0x04 /* Configuration register */
+#define ADP8860_BLSEN 0x05 /* Sink enable backlight or independent */
+#define ADP8860_BLOFF 0x06 /* Backlight off timeout */
+#define ADP8860_BLDIM 0x07 /* Backlight dim timeout */
+#define ADP8860_BLFR 0x08 /* Backlight fade in and out rates */
+#define ADP8860_BLMX1 0x09 /* Backlight (Brightness Level 1-daylight) maximum current */
+#define ADP8860_BLDM1 0x0A /* Backlight (Brightness Level 1-daylight) dim current */
+#define ADP8860_BLMX2 0x0B /* Backlight (Brightness Level 2-office) maximum current */
+#define ADP8860_BLDM2 0x0C /* Backlight (Brightness Level 2-office) dim current */
+#define ADP8860_BLMX3 0x0D /* Backlight (Brightness Level 3-dark) maximum current */
+#define ADP8860_BLDM3 0x0E /* Backlight (Brightness Level 3-dark) dim current */
+#define ADP8860_ISCFR 0x0F /* Independent sink current fade control register */
+#define ADP8860_ISCC 0x10 /* Independent sink current control register */
+#define ADP8860_ISCT1 0x11 /* Independent Sink Current Timer Register LED[7:5] */
+#define ADP8860_ISCT2 0x12 /* Independent Sink Current Timer Register LED[4:1] */
+#define ADP8860_ISCF 0x13 /* Independent sink current fade register */
+#define ADP8860_ISC7 0x14 /* Independent Sink Current LED7 */
+#define ADP8860_ISC6 0x15 /* Independent Sink Current LED6 */
+#define ADP8860_ISC5 0x16 /* Independent Sink Current LED5 */
+#define ADP8860_ISC4 0x17 /* Independent Sink Current LED4 */
+#define ADP8860_ISC3 0x18 /* Independent Sink Current LED3 */
+#define ADP8860_ISC2 0x19 /* Independent Sink Current LED2 */
+#define ADP8860_ISC1 0x1A /* Independent Sink Current LED1 */
+#define ADP8860_CCFG 0x1B /* Comparator configuration */
+#define ADP8860_CCFG2 0x1C /* Second comparator configuration */
+#define ADP8860_L2_TRP 0x1D /* L2 comparator reference */
+#define ADP8860_L2_HYS 0x1E /* L2 hysteresis */
+#define ADP8860_L3_TRP 0x1F /* L3 comparator reference */
+#define ADP8860_L3_HYS 0x20 /* L3 hysteresis */
+#define ADP8860_PH1LEVL 0x21 /* First phototransistor ambient light level-low byte register */
+#define ADP8860_PH1LEVH 0x22 /* First phototransistor ambient light level-high byte register */
+#define ADP8860_PH2LEVL 0x23 /* Second phototransistor ambient light level-low byte register */
+#define ADP8860_PH2LEVH 0x24 /* Second phototransistor ambient light level-high byte register */
+
+#define ADP8860_MANUFID 0x0 /* Analog Devices ADP8860 Manufacturer ID */
+#define ADP8861_MANUFID 0x4 /* Analog Devices ADP8861 Manufacturer ID */
+#define ADP8863_MANUFID 0x2 /* Analog Devices ADP8863 Manufacturer ID */
+
+#define ADP8860_DEVID(x) ((x) & 0xF)
+#define ADP8860_MANID(x) ((x) >> 4)
+
+/* MDCR Device mode and status */
+#define INT_CFG (1 << 6)
+#define NSTBY (1 << 5)
+#define DIM_EN (1 << 4)
+#define GDWN_DIS (1 << 3)
+#define SIS_EN (1 << 2)
+#define CMP_AUTOEN (1 << 1)
+#define BLEN (1 << 0)
+
+/* ADP8860_CCFG Main ALS comparator level enable */
+#define L3_EN (1 << 1)
+#define L2_EN (1 << 0)
+
+#define CFGR_BLV_SHIFT 3
+#define CFGR_BLV_MASK 0x3
+#define ADP8860_FLAG_LED_MASK 0xFF
+
+#define FADE_VAL(in, out) ((0xF & (in)) | ((0xF & (out)) << 4))
+#define BL_CFGR_VAL(law, blv) ((((blv) & CFGR_BLV_MASK) << CFGR_BLV_SHIFT) | ((0x3 & (law)) << 1))
+#define ALS_CCFG_VAL(filt) ((0x7 & filt) << 5)
+
+enum {
+ adp8860,
+ adp8861,
+ adp8863
+};
+
+struct adp8860_led {
+ struct led_classdev cdev;
+ struct work_struct work;
+ struct i2c_client *client;
+ enum led_brightness new_brightness;
+ int id;
+ int flags;
+};
+
+struct adp8860_bl {
+ struct i2c_client *client;
+ struct backlight_device *bl;
+ struct adp8860_led *led;
+ struct adp8860_backlight_platform_data *pdata;
+ struct mutex lock;
+ unsigned long cached_daylight_max;
+ int id;
+ int revid;
+ int current_brightness;
+ unsigned en_ambl_sens:1;
+ unsigned gdwn_dis:1;
+};
+
+static int adp8860_read(struct i2c_client *client, int reg, uint8_t *val)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed reading at 0x%02x\n", reg);
+ return ret;
+ }
+
+ *val = (uint8_t)ret;
+ return 0;
+}
+
+static int adp8860_write(struct i2c_client *client, u8 reg, u8 val)
+{
+ return i2c_smbus_write_byte_data(client, reg, val);
+}
+
+static int adp8860_set_bits(struct i2c_client *client, int reg, uint8_t bit_mask)
+{
+ struct adp8860_bl *data = i2c_get_clientdata(client);
+ uint8_t reg_val;
+ int ret;
+
+ mutex_lock(&data->lock);
+
+ ret = adp8860_read(client, reg, ®_val);
+
+ if (!ret && ((reg_val & bit_mask) == 0)) {
+ reg_val |= bit_mask;
+ ret = adp8860_write(client, reg, reg_val);
+ }
+
+ mutex_unlock(&data->lock);
+ return ret;
+}
+
+static int adp8860_clr_bits(struct i2c_client *client, int reg, uint8_t bit_mask)
+{
+ struct adp8860_bl *data = i2c_get_clientdata(client);
+ uint8_t reg_val;
+ int ret;
+
+ mutex_lock(&data->lock);
+
+ ret = adp8860_read(client, reg, ®_val);
+
+ if (!ret && (reg_val & bit_mask)) {
+ reg_val &= ~bit_mask;
+ ret = adp8860_write(client, reg, reg_val);
+ }
+
+ mutex_unlock(&data->lock);
+ return ret;
+}
+
+/*
+ * Independent sink / LED
+ */
+#if defined(ADP8860_USE_LEDS)
+static void adp8860_led_work(struct work_struct *work)
+{
+ struct adp8860_led *led = container_of(work, struct adp8860_led, work);
+ adp8860_write(led->client, ADP8860_ISC1 - led->id + 1,
+ led->new_brightness >> 1);
+}
+
+static void adp8860_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct adp8860_led *led;
+
+ led = container_of(led_cdev, struct adp8860_led, cdev);
+ led->new_brightness = value;
+ schedule_work(&led->work);
+}
+
+static int adp8860_led_setup(struct adp8860_led *led)
+{
+ struct i2c_client *client = led->client;
+ int ret = 0;
+
+ ret = adp8860_write(client, ADP8860_ISC1 - led->id + 1, 0);
+ ret |= adp8860_set_bits(client, ADP8860_ISCC, 1 << (led->id - 1));
+
+ if (led->id > 4)
+ ret |= adp8860_set_bits(client, ADP8860_ISCT1,
+ (led->flags & 0x3) << ((led->id - 5) * 2));
+ else
+ ret |= adp8860_set_bits(client, ADP8860_ISCT2,
+ (led->flags & 0x3) << ((led->id - 1) * 2));
+
+ return ret;
+}
+
+static int __devinit adp8860_led_probe(struct i2c_client *client)
+{
+ struct adp8860_backlight_platform_data *pdata =
+ client->dev.platform_data;
+ struct adp8860_bl *data = i2c_get_clientdata(client);
+ struct adp8860_led *led, *led_dat;
+ struct led_info *cur_led;
+ int ret, i;
+
+ led = kzalloc(sizeof(*led) * pdata->num_leds, GFP_KERNEL);
+ if (led == NULL) {
+ dev_err(&client->dev, "failed to alloc memory\n");
+ return -ENOMEM;
+ }
+
+ ret = adp8860_write(client, ADP8860_ISCFR, pdata->led_fade_law);
+ ret = adp8860_write(client, ADP8860_ISCT1,
+ (pdata->led_on_time & 0x3) << 6);
+ ret |= adp8860_write(client, ADP8860_ISCF,
+ FADE_VAL(pdata->led_fade_in, pdata->led_fade_out));
+
+ if (ret) {
+ dev_err(&client->dev, "failed to write\n");
+ goto err_free;
+ }
+
+ for (i = 0; i < pdata->num_leds; ++i) {
+ cur_led = &pdata->leds[i];
+ led_dat = &led[i];
+
+ led_dat->id = cur_led->flags & ADP8860_FLAG_LED_MASK;
+
+ if (led_dat->id > 7 || led_dat->id < 1) {
+ dev_err(&client->dev, "Invalid LED ID %d\n",
+ led_dat->id);
+ goto err;
+ }
+
+ if (pdata->bl_led_assign & (1 << (led_dat->id - 1))) {
+ dev_err(&client->dev, "LED %d used by Backlight\n",
+ led_dat->id);
+ goto err;
+ }
+
+ led_dat->cdev.name = cur_led->name;
+ led_dat->cdev.default_trigger = cur_led->default_trigger;
+ led_dat->cdev.brightness_set = adp8860_led_set;
+ led_dat->cdev.brightness = LED_OFF;
+ led_dat->flags = cur_led->flags >> FLAG_OFFT_SHIFT;
+ led_dat->client = client;
+ led_dat->new_brightness = LED_OFF;
+ INIT_WORK(&led_dat->work, adp8860_led_work);
+
+ ret = led_classdev_register(&client->dev, &led_dat->cdev);
+ if (ret) {
+ dev_err(&client->dev, "failed to register LED %d\n",
+ led_dat->id);
+ goto err;
+ }
+
+ ret = adp8860_led_setup(led_dat);
+ if (ret) {
+ dev_err(&client->dev, "failed to write\n");
+ i++;
+ goto err;
+ }
+ }
+
+ data->led = led;
+
+ return 0;
+
+ err:
+ for (i = i - 1; i >= 0; --i) {
+ led_classdev_unregister(&led[i].cdev);
+ cancel_work_sync(&led[i].work);
+ }
+
+ err_free:
+ kfree(led);
+
+ return ret;
+}
+
+static int __devexit adp8860_led_remove(struct i2c_client *client)
+{
+ struct adp8860_backlight_platform_data *pdata =
+ client->dev.platform_data;
+ struct adp8860_bl *data = i2c_get_clientdata(client);
+ int i;
+
+ for (i = 0; i < pdata->num_leds; i++) {
+ led_classdev_unregister(&data->led[i].cdev);
+ cancel_work_sync(&data->led[i].work);
+ }
+
+ kfree(data->led);
+ return 0;
+}
+#else
+static int __devinit adp8860_led_probe(struct i2c_client *client)
+{
+ return 0;
+}
+
+static int __devexit adp8860_led_remove(struct i2c_client *client)
+{
+ return 0;
+}
+#endif
+
+static int adp8860_bl_set(struct backlight_device *bl, int brightness)
+{
+ struct adp8860_bl *data = bl_get_data(bl);
+ struct i2c_client *client = data->client;
+ int ret = 0;
+
+ if (data->en_ambl_sens) {
+ if ((brightness > 0) && (brightness < ADP8860_MAX_BRIGHTNESS)) {
+ /* Disable Ambient Light auto adjust */
+ ret |= adp8860_clr_bits(client, ADP8860_MDCR,
+ CMP_AUTOEN);
+ ret |= adp8860_write(client, ADP8860_BLMX1, brightness);
+ } else {
+ /*
+ * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust
+ * restore daylight l1 sysfs brightness
+ */
+ ret |= adp8860_write(client, ADP8860_BLMX1,
+ data->cached_daylight_max);
+ ret |= adp8860_set_bits(client, ADP8860_MDCR,
+ CMP_AUTOEN);
+ }
+ } else
+ ret |= adp8860_write(client, ADP8860_BLMX1, brightness);
+
+ if (data->current_brightness && brightness == 0)
+ ret |= adp8860_set_bits(client,
+ ADP8860_MDCR, DIM_EN);
+ else if (data->current_brightness == 0 && brightness)
+ ret |= adp8860_clr_bits(client,
+ ADP8860_MDCR, DIM_EN);
+
+ if (!ret)
+ data->current_brightness = brightness;
+
+ return ret;
+}
+
+static int adp8860_bl_update_status(struct backlight_device *bl)
+{
+ int brightness = bl->props.brightness;
+ if (bl->props.power != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ return adp8860_bl_set(bl, brightness);
+}
+
+static int adp8860_bl_get_brightness(struct backlight_device *bl)
+{
+ struct adp8860_bl *data = bl_get_data(bl);
+
+ return data->current_brightness;
+}
+
+static const struct backlight_ops adp8860_bl_ops = {
+ .update_status = adp8860_bl_update_status,
+ .get_brightness = adp8860_bl_get_brightness,
+};
+
+static int adp8860_bl_setup(struct backlight_device *bl)
+{
+ struct adp8860_bl *data = bl_get_data(bl);
+ struct i2c_client *client = data->client;
+ struct adp8860_backlight_platform_data *pdata = data->pdata;
+ int ret = 0;
+
+ ret |= adp8860_write(client, ADP8860_BLSEN, ~pdata->bl_led_assign);
+ ret |= adp8860_write(client, ADP8860_BLMX1, pdata->l1_daylight_max);
+ ret |= adp8860_write(client, ADP8860_BLDM1, pdata->l1_daylight_dim);
+
+ if (data->en_ambl_sens) {
+ data->cached_daylight_max = pdata->l1_daylight_max;
+ ret |= adp8860_write(client, ADP8860_BLMX2,
+ pdata->l2_office_max);
+ ret |= adp8860_write(client, ADP8860_BLDM2,
+ pdata->l2_office_dim);
+ ret |= adp8860_write(client, ADP8860_BLMX3,
+ pdata->l3_dark_max);
+ ret |= adp8860_write(client, ADP8860_BLDM3,
+ pdata->l3_dark_dim);
+
+ ret |= adp8860_write(client, ADP8860_L2_TRP, pdata->l2_trip);
+ ret |= adp8860_write(client, ADP8860_L2_HYS, pdata->l2_hyst);
+ ret |= adp8860_write(client, ADP8860_L3_TRP, pdata->l3_trip);
+ ret |= adp8860_write(client, ADP8860_L3_HYS, pdata->l3_hyst);
+ ret |= adp8860_write(client, ADP8860_CCFG, L2_EN | L3_EN |
+ ALS_CCFG_VAL(pdata->abml_filt));
+ }
+
+ ret |= adp8860_write(client, ADP8860_CFGR,
+ BL_CFGR_VAL(pdata->bl_fade_law, 0));
+
+ ret |= adp8860_write(client, ADP8860_BLFR, FADE_VAL(pdata->bl_fade_in,
+ pdata->bl_fade_out));
+
+ ret |= adp8860_set_bits(client, ADP8860_MDCR, BLEN | DIM_EN | NSTBY |
+ (data->gdwn_dis ? GDWN_DIS : 0));
+
+ return ret;
+}
+
+static ssize_t adp8860_show(struct device *dev, char *buf, int reg)
+{
+ struct adp8860_bl *data = dev_get_drvdata(dev);
+ int error;
+ uint8_t reg_val;
+
+ mutex_lock(&data->lock);
+ error = adp8860_read(data->client, reg, ®_val);
+ mutex_unlock(&data->lock);
+
+ if (error < 0)
+ return error;
+
+ return sprintf(buf, "%u\n", reg_val);
+}
+
+static ssize_t adp8860_store(struct device *dev, const char *buf,
+ size_t count, int reg)
+{
+ struct adp8860_bl *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int ret;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ mutex_lock(&data->lock);
+ adp8860_write(data->client, reg, val);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t adp8860_bl_l3_dark_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8860_show(dev, buf, ADP8860_BLMX3);
+}
+
+static ssize_t adp8860_bl_l3_dark_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp8860_store(dev, buf, count, ADP8860_BLMX3);
+}
+
+static DEVICE_ATTR(l3_dark_max, 0664, adp8860_bl_l3_dark_max_show,
+ adp8860_bl_l3_dark_max_store);
+
+static ssize_t adp8860_bl_l2_office_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8860_show(dev, buf, ADP8860_BLMX2);
+}
+
+static ssize_t adp8860_bl_l2_office_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp8860_store(dev, buf, count, ADP8860_BLMX2);
+}
+static DEVICE_ATTR(l2_office_max, 0664, adp8860_bl_l2_office_max_show,
+ adp8860_bl_l2_office_max_store);
+
+static ssize_t adp8860_bl_l1_daylight_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8860_show(dev, buf, ADP8860_BLMX1);
+}
+
+static ssize_t adp8860_bl_l1_daylight_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct adp8860_bl *data = dev_get_drvdata(dev);
+
+ strict_strtoul(buf, 10, &data->cached_daylight_max);
+ return adp8860_store(dev, buf, count, ADP8860_BLMX1);
+}
+static DEVICE_ATTR(l1_daylight_max, 0664, adp8860_bl_l1_daylight_max_show,
+ adp8860_bl_l1_daylight_max_store);
+
+static ssize_t adp8860_bl_l3_dark_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8860_show(dev, buf, ADP8860_BLDM3);
+}
+
+static ssize_t adp8860_bl_l3_dark_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8860_store(dev, buf, count, ADP8860_BLDM3);
+}
+static DEVICE_ATTR(l3_dark_dim, 0664, adp8860_bl_l3_dark_dim_show,
+ adp8860_bl_l3_dark_dim_store);
+
+static ssize_t adp8860_bl_l2_office_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8860_show(dev, buf, ADP8860_BLDM2);
+}
+
+static ssize_t adp8860_bl_l2_office_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8860_store(dev, buf, count, ADP8860_BLDM2);
+}
+static DEVICE_ATTR(l2_office_dim, 0664, adp8860_bl_l2_office_dim_show,
+ adp8860_bl_l2_office_dim_store);
+
+static ssize_t adp8860_bl_l1_daylight_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8860_show(dev, buf, ADP8860_BLDM1);
+}
+
+static ssize_t adp8860_bl_l1_daylight_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8860_store(dev, buf, count, ADP8860_BLDM1);
+}
+static DEVICE_ATTR(l1_daylight_dim, 0664, adp8860_bl_l1_daylight_dim_show,
+ adp8860_bl_l1_daylight_dim_store);
+
+#ifdef ADP8860_EXT_FEATURES
+static ssize_t adp8860_bl_ambient_light_level_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct adp8860_bl *data = dev_get_drvdata(dev);
+ int error;
+ uint8_t reg_val;
+ uint16_t ret_val;
+
+ mutex_lock(&data->lock);
+ error = adp8860_read(data->client, ADP8860_PH1LEVL, ®_val);
+ ret_val = reg_val;
+ error |= adp8860_read(data->client, ADP8860_PH1LEVH, ®_val);
+ mutex_unlock(&data->lock);
+
+ if (error < 0)
+ return error;
+
+ /* Return 13-bit conversion value for the first light sensor */
+ ret_val += (reg_val & 0x1F) << 8;
+
+ return sprintf(buf, "%u\n", ret_val);
+}
+static DEVICE_ATTR(ambient_light_level, 0444,
+ adp8860_bl_ambient_light_level_show, NULL);
+
+static ssize_t adp8860_bl_ambient_light_zone_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct adp8860_bl *data = dev_get_drvdata(dev);
+ int error;
+ uint8_t reg_val;
+
+ mutex_lock(&data->lock);
+ error = adp8860_read(data->client, ADP8860_CFGR, ®_val);
+ mutex_unlock(&data->lock);
+
+ if (error < 0)
+ return error;
+
+ return sprintf(buf, "%u\n",
+ ((reg_val >> CFGR_BLV_SHIFT) & CFGR_BLV_MASK) + 1);
+}
+
+static ssize_t adp8860_bl_ambient_light_zone_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct adp8860_bl *data = dev_get_drvdata(dev);
+ unsigned long val;
+ uint8_t reg_val;
+ int ret;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ if (val == 0) {
+ /* Enable automatic ambient light sensing */
+ adp8860_set_bits(data->client, ADP8860_MDCR, CMP_AUTOEN);
+ } else if ((val > 0) && (val < 6)) {
+ /* Disable automatic ambient light sensing */
+ adp8860_clr_bits(data->client, ADP8860_MDCR, CMP_AUTOEN);
+
+ /* Set user supplied ambient light zone */
+ mutex_lock(&data->lock);
+ adp8860_read(data->client, ADP8860_CFGR, ®_val);
+ reg_val &= ~(CFGR_BLV_MASK << CFGR_BLV_SHIFT);
+ reg_val |= val << CFGR_BLV_SHIFT;
+ adp8860_write(data->client, ADP8860_CFGR, reg_val);
+ mutex_unlock(&data->lock);
+ }
+
+ return count;
+}
+static DEVICE_ATTR(ambient_light_zone, 0664,
+ adp8860_bl_ambient_light_zone_show,
+ adp8860_bl_ambient_light_zone_store);
+#endif
+
+static struct attribute *adp8860_bl_attributes[] = {
+ &dev_attr_l3_dark_max.attr,
+ &dev_attr_l3_dark_dim.attr,
+ &dev_attr_l2_office_max.attr,
+ &dev_attr_l2_office_dim.attr,
+ &dev_attr_l1_daylight_max.attr,
+ &dev_attr_l1_daylight_dim.attr,
+#ifdef ADP8860_EXT_FEATURES
+ &dev_attr_ambient_light_level.attr,
+ &dev_attr_ambient_light_zone.attr,
+#endif
+ NULL
+};
+
+static const struct attribute_group adp8860_bl_attr_group = {
+ .attrs = adp8860_bl_attributes,
+};
+
+static int __devinit adp8860_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct backlight_device *bl;
+ struct adp8860_bl *data;
+ struct adp8860_backlight_platform_data *pdata =
+ client->dev.platform_data;
+ struct backlight_properties props;
+ uint8_t reg_val;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+ return -EIO;
+ }
+
+ if (!pdata) {
+ dev_err(&client->dev, "no platform data?\n");
+ return -EINVAL;
+ }
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+
+ ret = adp8860_read(client, ADP8860_MFDVID, ®_val);
+ if (ret < 0)
+ goto out2;
+
+ switch (ADP8860_MANID(reg_val)) {
+ case ADP8863_MANUFID:
+ data->gdwn_dis = !!pdata->gdwn_dis;
+ case ADP8860_MANUFID:
+ data->en_ambl_sens = !!pdata->en_ambl_sens;
+ break;
+ case ADP8861_MANUFID:
+ data->gdwn_dis = !!pdata->gdwn_dis;
+ break;
+ default:
+ dev_err(&client->dev, "failed to probe\n");
+ ret = -ENODEV;
+ goto out2;
+ }
+
+ /* It's confirmed that the DEVID field is actually a REVID */
+
+ data->revid = ADP8860_DEVID(reg_val);
+ data->client = client;
+ data->pdata = pdata;
+ data->id = id->driver_data;
+ data->current_brightness = 0;
+ i2c_set_clientdata(client, data);
+
+ memset(&props, 0, sizeof(props));
+ props.max_brightness = ADP8860_MAX_BRIGHTNESS;
+
+ mutex_init(&data->lock);
+
+ bl = backlight_device_register(dev_driver_string(&client->dev),
+ &client->dev, data, &adp8860_bl_ops, &props);
+ if (IS_ERR(bl)) {
+ dev_err(&client->dev, "failed to register backlight\n");
+ ret = PTR_ERR(bl);
+ goto out2;
+ }
+
+ bl->props.max_brightness =
+ bl->props.brightness = ADP8860_MAX_BRIGHTNESS;
+
+ data->bl = bl;
+
+ if (data->en_ambl_sens)
+ ret = sysfs_create_group(&bl->dev.kobj,
+ &adp8860_bl_attr_group);
+
+ if (ret) {
+ dev_err(&client->dev, "failed to register sysfs\n");
+ goto out1;
+ }
+
+ ret = adp8860_bl_setup(bl);
+ if (ret) {
+ ret = -EIO;
+ goto out;
+ }
+
+ backlight_update_status(bl);
+
+ dev_info(&client->dev, "%s Rev.%d Backlight\n",
+ client->name, data->revid);
+
+ if (pdata->num_leds)
+ adp8860_led_probe(client);
+
+ return 0;
+
+out:
+ if (data->en_ambl_sens)
+ sysfs_remove_group(&data->bl->dev.kobj,
+ &adp8860_bl_attr_group);
+out1:
+ backlight_device_unregister(bl);
+out2:
+ kfree(data);
+
+ return ret;
+}
+
+static int __devexit adp8860_remove(struct i2c_client *client)
+{
+ struct adp8860_bl *data = i2c_get_clientdata(client);
+
+ adp8860_clr_bits(client, ADP8860_MDCR, NSTBY);
+
+ if (data->led)
+ adp8860_led_remove(client);
+
+ if (data->en_ambl_sens)
+ sysfs_remove_group(&data->bl->dev.kobj,
+ &adp8860_bl_attr_group);
+
+ backlight_device_unregister(data->bl);
+ kfree(data);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int adp8860_i2c_suspend(struct i2c_client *client, pm_message_t message)
+{
+ adp8860_clr_bits(client, ADP8860_MDCR, NSTBY);
+
+ return 0;
+}
+
+static int adp8860_i2c_resume(struct i2c_client *client)
+{
+ adp8860_set_bits(client, ADP8860_MDCR, NSTBY);
+
+ return 0;
+}
+#else
+#define adp8860_i2c_suspend NULL
+#define adp8860_i2c_resume NULL
+#endif
+
+static const struct i2c_device_id adp8860_id[] = {
+ { "adp8860", adp8860 },
+ { "adp8861", adp8861 },
+ { "adp8863", adp8863 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adp8860_id);
+
+static struct i2c_driver adp8860_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ },
+ .probe = adp8860_probe,
+ .remove = __devexit_p(adp8860_remove),
+ .suspend = adp8860_i2c_suspend,
+ .resume = adp8860_i2c_resume,
+ .id_table = adp8860_id,
+};
+
+static int __init adp8860_init(void)
+{
+ return i2c_add_driver(&adp8860_driver);
+}
+module_init(adp8860_init);
+
+static void __exit adp8860_exit(void)
+{
+ i2c_del_driver(&adp8860_driver);
+}
+module_exit(adp8860_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADP8860 Backlight driver");
+MODULE_ALIAS("i2c:adp8860-backlight");
diff --git a/drivers/video/backlight/adx_bl.c b/drivers/video/backlight/adx_bl.c
index 7f4a7c3..fe9af12 100644
--- a/drivers/video/backlight/adx_bl.c
+++ b/drivers/video/backlight/adx_bl.c
@@ -107,8 +107,8 @@
props.max_brightness = 0xff;
bldev = backlight_device_register(dev_name(&pdev->dev), &pdev->dev,
bl, &adx_backlight_ops, &props);
- if (!bldev) {
- ret = -ENOMEM;
+ if (IS_ERR(bldev)) {
+ ret = PTR_ERR(bldev);
goto out;
}
diff --git a/drivers/video/backlight/ep93xx_bl.c b/drivers/video/backlight/ep93xx_bl.c
new file mode 100644
index 0000000..b0cc491
--- /dev/null
+++ b/drivers/video/backlight/ep93xx_bl.c
@@ -0,0 +1,160 @@
+/*
+ * Driver for the Cirrus EP93xx lcd backlight
+ *
+ * Copyright (c) 2010 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver controls the pulse width modulated brightness control output,
+ * BRIGHT, on the Cirrus EP9307, EP9312, and EP9315 processors.
+ */
+
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+
+#include <mach/hardware.h>
+
+#define EP93XX_RASTER_REG(x) (EP93XX_RASTER_BASE + (x))
+#define EP93XX_RASTER_BRIGHTNESS EP93XX_RASTER_REG(0x20)
+
+#define EP93XX_MAX_COUNT 255
+#define EP93XX_MAX_BRIGHT 255
+#define EP93XX_DEF_BRIGHT 128
+
+struct ep93xxbl {
+ void __iomem *mmio;
+ int brightness;
+};
+
+static int ep93xxbl_set(struct backlight_device *bl, int brightness)
+{
+ struct ep93xxbl *ep93xxbl = bl_get_data(bl);
+
+ __raw_writel((brightness << 8) | EP93XX_MAX_COUNT, ep93xxbl->mmio);
+
+ ep93xxbl->brightness = brightness;
+
+ return 0;
+}
+
+static int ep93xxbl_update_status(struct backlight_device *bl)
+{
+ int brightness = bl->props.brightness;
+
+ if (bl->props.power != FB_BLANK_UNBLANK ||
+ bl->props.fb_blank != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ return ep93xxbl_set(bl, brightness);
+}
+
+static int ep93xxbl_get_brightness(struct backlight_device *bl)
+{
+ struct ep93xxbl *ep93xxbl = bl_get_data(bl);
+
+ return ep93xxbl->brightness;
+}
+
+static const struct backlight_ops ep93xxbl_ops = {
+ .update_status = ep93xxbl_update_status,
+ .get_brightness = ep93xxbl_get_brightness,
+};
+
+static int __init ep93xxbl_probe(struct platform_device *dev)
+{
+ struct ep93xxbl *ep93xxbl;
+ struct backlight_device *bl;
+ struct backlight_properties props;
+
+ ep93xxbl = devm_kzalloc(&dev->dev, sizeof(*ep93xxbl), GFP_KERNEL);
+ if (!ep93xxbl)
+ return -ENOMEM;
+
+ /*
+ * This register is located in the range already ioremap'ed by
+ * the framebuffer driver. A MFD driver seems a bit of overkill
+ * to handle this so use the static I/O mapping; this address
+ * is already virtual.
+ *
+ * NOTE: No locking is required; the framebuffer does not touch
+ * this register.
+ */
+ ep93xxbl->mmio = EP93XX_RASTER_BRIGHTNESS;
+
+ memset(&props, 0, sizeof(struct backlight_properties));
+ props.max_brightness = EP93XX_MAX_BRIGHT;
+ bl = backlight_device_register(dev->name, &dev->dev, ep93xxbl,
+ &ep93xxbl_ops, &props);
+ if (IS_ERR(bl))
+ return PTR_ERR(bl);
+
+ bl->props.brightness = EP93XX_DEF_BRIGHT;
+
+ platform_set_drvdata(dev, bl);
+
+ ep93xxbl_update_status(bl);
+
+ return 0;
+}
+
+static int ep93xxbl_remove(struct platform_device *dev)
+{
+ struct backlight_device *bl = platform_get_drvdata(dev);
+
+ backlight_device_unregister(bl);
+ platform_set_drvdata(dev, NULL);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ep93xxbl_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct backlight_device *bl = platform_get_drvdata(dev);
+
+ return ep93xxbl_set(bl, 0);
+}
+
+static int ep93xxbl_resume(struct platform_device *dev)
+{
+ struct backlight_device *bl = platform_get_drvdata(dev);
+
+ backlight_update_status(bl);
+ return 0;
+}
+#else
+#define ep93xxbl_suspend NULL
+#define ep93xxbl_resume NULL
+#endif
+
+static struct platform_driver ep93xxbl_driver = {
+ .driver = {
+ .name = "ep93xx-bl",
+ .owner = THIS_MODULE,
+ },
+ .probe = ep93xxbl_probe,
+ .remove = __devexit_p(ep93xxbl_remove),
+ .suspend = ep93xxbl_suspend,
+ .resume = ep93xxbl_resume,
+};
+
+static int __init ep93xxbl_init(void)
+{
+ return platform_driver_register(&ep93xxbl_driver);
+}
+module_init(ep93xxbl_init);
+
+static void __exit ep93xxbl_exit(void)
+{
+ platform_driver_unregister(&ep93xxbl_driver);
+}
+module_exit(ep93xxbl_exit);
+
+MODULE_DESCRIPTION("EP93xx Backlight Driver");
+MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ep93xx-bl");
diff --git a/drivers/video/backlight/l4f00242t03.c b/drivers/video/backlight/l4f00242t03.c
index bcdb12c..9093ef0 100644
--- a/drivers/video/backlight/l4f00242t03.c
+++ b/drivers/video/backlight/l4f00242t03.c
@@ -125,8 +125,7 @@
if (priv == NULL) {
dev_err(&spi->dev, "No memory for this device.\n");
- ret = -ENOMEM;
- goto err;
+ return -ENOMEM;
}
dev_set_drvdata(&spi->dev, priv);
@@ -139,7 +138,7 @@
if (ret) {
dev_err(&spi->dev,
"Unable to get the lcd l4f00242t03 reset gpio.\n");
- return ret;
+ goto err;
}
ret = gpio_direction_output(pdata->reset_gpio, 1);
@@ -151,7 +150,7 @@
if (ret) {
dev_err(&spi->dev,
"Unable to get the lcd l4f00242t03 data en gpio.\n");
- return ret;
+ goto err2;
}
ret = gpio_direction_output(pdata->data_enable_gpio, 0);
@@ -222,9 +221,9 @@
gpio_free(pdata->reset_gpio);
if (priv->io_reg)
- regulator_put(priv->core_reg);
- if (priv->core_reg)
regulator_put(priv->io_reg);
+ if (priv->core_reg)
+ regulator_put(priv->core_reg);
kfree(priv);
diff --git a/drivers/video/backlight/max8925_bl.c b/drivers/video/backlight/max8925_bl.c
index b5accc9..b2b2c7b 100644
--- a/drivers/video/backlight/max8925_bl.c
+++ b/drivers/video/backlight/max8925_bl.c
@@ -162,6 +162,7 @@
backlight_update_status(bl);
return 0;
out:
+ backlight_device_unregister(bl);
kfree(data);
return ret;
}
diff --git a/drivers/video/backlight/mbp_nvidia_bl.c b/drivers/video/backlight/mbp_nvidia_bl.c
index 1b5d3fe..9fb533f 100644
--- a/drivers/video/backlight/mbp_nvidia_bl.c
+++ b/drivers/video/backlight/mbp_nvidia_bl.c
@@ -141,7 +141,7 @@
.callback = mbp_dmi_match,
.ident = "MacBook 1,1",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
},
.driver_data = (void *)&intel_chipset_data,
@@ -184,6 +184,42 @@
},
{
.callback = mbp_dmi_match,
+ .ident = "MacBookPro 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro1,1"),
+ },
+ .driver_data = (void *)&intel_chipset_data,
+ },
+ {
+ .callback = mbp_dmi_match,
+ .ident = "MacBookPro 1,2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro1,2"),
+ },
+ .driver_data = (void *)&intel_chipset_data,
+ },
+ {
+ .callback = mbp_dmi_match,
+ .ident = "MacBookPro 2,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,1"),
+ },
+ .driver_data = (void *)&intel_chipset_data,
+ },
+ {
+ .callback = mbp_dmi_match,
+ .ident = "MacBookPro 2,2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2"),
+ },
+ .driver_data = (void *)&intel_chipset_data,
+ },
+ {
+ .callback = mbp_dmi_match,
.ident = "MacBookPro 3,1",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
@@ -238,6 +274,15 @@
},
{
.callback = mbp_dmi_match,
+ .ident = "MacBook 6,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook6,1"),
+ },
+ .driver_data = (void *)&nvidia_chipset_data,
+ },
+ {
+ .callback = mbp_dmi_match,
.ident = "MacBookAir 2,1",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
diff --git a/drivers/video/backlight/pcf50633-backlight.c b/drivers/video/backlight/pcf50633-backlight.c
new file mode 100644
index 0000000..3c424f7
--- /dev/null
+++ b/drivers/video/backlight/pcf50633-backlight.c
@@ -0,0 +1,190 @@
+/*
+ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ * PCF50633 backlight device driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include <linux/backlight.h>
+#include <linux/fb.h>
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/backlight.h>
+
+struct pcf50633_bl {
+ struct pcf50633 *pcf;
+ struct backlight_device *bl;
+
+ unsigned int brightness;
+ unsigned int brightness_limit;
+};
+
+/*
+ * pcf50633_bl_set_brightness_limit
+ *
+ * Update the brightness limit for the pc50633 backlight. The actual brightness
+ * will not go above the limit. This is useful to limit power drain for example
+ * on low battery.
+ *
+ * @dev: Pointer to a pcf50633 device
+ * @limit: The brightness limit. Valid values are 0-63
+ */
+int pcf50633_bl_set_brightness_limit(struct pcf50633 *pcf, unsigned int limit)
+{
+ struct pcf50633_bl *pcf_bl = platform_get_drvdata(pcf->bl_pdev);
+
+ if (!pcf_bl)
+ return -ENODEV;
+
+ pcf_bl->brightness_limit = limit & 0x3f;
+ backlight_update_status(pcf_bl->bl);
+
+ return 0;
+}
+
+static int pcf50633_bl_update_status(struct backlight_device *bl)
+{
+ struct pcf50633_bl *pcf_bl = bl_get_data(bl);
+ unsigned int new_brightness;
+
+
+ if (bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK) ||
+ bl->props.power != FB_BLANK_UNBLANK)
+ new_brightness = 0;
+ else if (bl->props.brightness < pcf_bl->brightness_limit)
+ new_brightness = bl->props.brightness;
+ else
+ new_brightness = pcf_bl->brightness_limit;
+
+
+ if (pcf_bl->brightness == new_brightness)
+ return 0;
+
+ if (new_brightness) {
+ pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDOUT,
+ new_brightness);
+ if (!pcf_bl->brightness)
+ pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDENA, 1);
+ } else {
+ pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDENA, 0);
+ }
+
+ pcf_bl->brightness = new_brightness;
+
+ return 0;
+}
+
+static int pcf50633_bl_get_brightness(struct backlight_device *bl)
+{
+ struct pcf50633_bl *pcf_bl = bl_get_data(bl);
+ return pcf_bl->brightness;
+}
+
+static const struct backlight_ops pcf50633_bl_ops = {
+ .get_brightness = pcf50633_bl_get_brightness,
+ .update_status = pcf50633_bl_update_status,
+ .options = BL_CORE_SUSPENDRESUME,
+};
+
+static int __devinit pcf50633_bl_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct pcf50633_bl *pcf_bl;
+ struct device *parent = pdev->dev.parent;
+ struct pcf50633_platform_data *pcf50633_data = parent->platform_data;
+ struct pcf50633_bl_platform_data *pdata = pcf50633_data->backlight_data;
+ struct backlight_properties bl_props;
+
+ pcf_bl = kzalloc(sizeof(*pcf_bl), GFP_KERNEL);
+ if (!pcf_bl)
+ return -ENOMEM;
+
+ bl_props.max_brightness = 0x3f;
+ bl_props.power = FB_BLANK_UNBLANK;
+
+ if (pdata) {
+ bl_props.brightness = pdata->default_brightness;
+ pcf_bl->brightness_limit = pdata->default_brightness_limit;
+ } else {
+ bl_props.brightness = 0x3f;
+ pcf_bl->brightness_limit = 0x3f;
+ }
+
+ pcf_bl->pcf = dev_to_pcf50633(pdev->dev.parent);
+
+ pcf_bl->bl = backlight_device_register(pdev->name, &pdev->dev, pcf_bl,
+ &pcf50633_bl_ops, &bl_props);
+
+ if (IS_ERR(pcf_bl->bl)) {
+ ret = PTR_ERR(pcf_bl->bl);
+ goto err_free;
+ }
+
+ platform_set_drvdata(pdev, pcf_bl);
+
+ pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDDIM, pdata->ramp_time);
+
+ /* Should be different from bl_props.brightness, so we do not exit
+ * update_status early the first time it's called */
+ pcf_bl->brightness = pcf_bl->bl->props.brightness + 1;
+
+ backlight_update_status(pcf_bl->bl);
+
+ return 0;
+
+err_free:
+ kfree(pcf_bl);
+
+ return ret;
+}
+
+static int __devexit pcf50633_bl_remove(struct platform_device *pdev)
+{
+ struct pcf50633_bl *pcf_bl = platform_get_drvdata(pdev);
+
+ backlight_device_unregister(pcf_bl->bl);
+
+ platform_set_drvdata(pdev, NULL);
+
+ kfree(pcf_bl);
+
+ return 0;
+}
+
+static struct platform_driver pcf50633_bl_driver = {
+ .probe = pcf50633_bl_probe,
+ .remove = __devexit_p(pcf50633_bl_remove),
+ .driver = {
+ .name = "pcf50633-backlight",
+ },
+};
+
+static int __init pcf50633_bl_init(void)
+{
+ return platform_driver_register(&pcf50633_bl_driver);
+}
+module_init(pcf50633_bl_init);
+
+static void __exit pcf50633_bl_exit(void)
+{
+ platform_driver_unregister(&pcf50633_bl_driver);
+}
+module_exit(pcf50633_bl_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("PCF50633 backlight driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcf50633-backlight");
diff --git a/drivers/video/backlight/s6e63m0.c b/drivers/video/backlight/s6e63m0.c
new file mode 100644
index 0000000..a3128c9
--- /dev/null
+++ b/drivers/video/backlight/s6e63m0.c
@@ -0,0 +1,920 @@
+/*
+ * S6E63M0 AMOLED LCD panel driver.
+ *
+ * Author: InKi Dae <inki.dae@samsung.com>
+ *
+ * Derived from drivers/video/omap/lcd-apollon.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/wait.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/lcd.h>
+#include <linux/backlight.h>
+
+#include "s6e63m0_gamma.h"
+
+#define SLEEPMSEC 0x1000
+#define ENDDEF 0x2000
+#define DEFMASK 0xFF00
+#define COMMAND_ONLY 0xFE
+#define DATA_ONLY 0xFF
+
+#define MIN_BRIGHTNESS 0
+#define MAX_BRIGHTNESS 10
+
+#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
+
+struct s6e63m0 {
+ struct device *dev;
+ struct spi_device *spi;
+ unsigned int power;
+ unsigned int current_brightness;
+ unsigned int gamma_mode;
+ unsigned int gamma_table_count;
+ struct lcd_device *ld;
+ struct backlight_device *bd;
+ struct lcd_platform_data *lcd_pd;
+};
+
+static const unsigned short SEQ_PANEL_CONDITION_SET[] = {
+ 0xF8, 0x01,
+ DATA_ONLY, 0x27,
+ DATA_ONLY, 0x27,
+ DATA_ONLY, 0x07,
+ DATA_ONLY, 0x07,
+ DATA_ONLY, 0x54,
+ DATA_ONLY, 0x9f,
+ DATA_ONLY, 0x63,
+ DATA_ONLY, 0x86,
+ DATA_ONLY, 0x1a,
+ DATA_ONLY, 0x33,
+ DATA_ONLY, 0x0d,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+
+ ENDDEF, 0x0000
+};
+
+static const unsigned short SEQ_DISPLAY_CONDITION_SET[] = {
+ 0xf2, 0x02,
+ DATA_ONLY, 0x03,
+ DATA_ONLY, 0x1c,
+ DATA_ONLY, 0x10,
+ DATA_ONLY, 0x10,
+
+ 0xf7, 0x03,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+
+ ENDDEF, 0x0000
+};
+
+static const unsigned short SEQ_GAMMA_SETTING[] = {
+ 0xfa, 0x00,
+ DATA_ONLY, 0x18,
+ DATA_ONLY, 0x08,
+ DATA_ONLY, 0x24,
+ DATA_ONLY, 0x64,
+ DATA_ONLY, 0x56,
+ DATA_ONLY, 0x33,
+ DATA_ONLY, 0xb6,
+ DATA_ONLY, 0xba,
+ DATA_ONLY, 0xa8,
+ DATA_ONLY, 0xac,
+ DATA_ONLY, 0xb1,
+ DATA_ONLY, 0x9d,
+ DATA_ONLY, 0xc1,
+ DATA_ONLY, 0xc1,
+ DATA_ONLY, 0xb7,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x9c,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x9f,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0xd6,
+
+ 0xfa, 0x01,
+
+ ENDDEF, 0x0000
+};
+
+static const unsigned short SEQ_ETC_CONDITION_SET[] = {
+ 0xf6, 0x00,
+ DATA_ONLY, 0x8c,
+ DATA_ONLY, 0x07,
+
+ 0xb3, 0xc,
+
+ 0xb5, 0x2c,
+ DATA_ONLY, 0x12,
+ DATA_ONLY, 0x0c,
+ DATA_ONLY, 0x0a,
+ DATA_ONLY, 0x10,
+ DATA_ONLY, 0x0e,
+ DATA_ONLY, 0x17,
+ DATA_ONLY, 0x13,
+ DATA_ONLY, 0x1f,
+ DATA_ONLY, 0x1a,
+ DATA_ONLY, 0x2a,
+ DATA_ONLY, 0x24,
+ DATA_ONLY, 0x1f,
+ DATA_ONLY, 0x1b,
+ DATA_ONLY, 0x1a,
+ DATA_ONLY, 0x17,
+
+ DATA_ONLY, 0x2b,
+ DATA_ONLY, 0x26,
+ DATA_ONLY, 0x22,
+ DATA_ONLY, 0x20,
+ DATA_ONLY, 0x3a,
+ DATA_ONLY, 0x34,
+ DATA_ONLY, 0x30,
+ DATA_ONLY, 0x2c,
+ DATA_ONLY, 0x29,
+ DATA_ONLY, 0x26,
+ DATA_ONLY, 0x25,
+ DATA_ONLY, 0x23,
+ DATA_ONLY, 0x21,
+ DATA_ONLY, 0x20,
+ DATA_ONLY, 0x1e,
+ DATA_ONLY, 0x1e,
+
+ 0xb6, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x11,
+ DATA_ONLY, 0x22,
+ DATA_ONLY, 0x33,
+ DATA_ONLY, 0x44,
+ DATA_ONLY, 0x44,
+ DATA_ONLY, 0x44,
+
+ DATA_ONLY, 0x55,
+ DATA_ONLY, 0x55,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+
+ 0xb7, 0x2c,
+ DATA_ONLY, 0x12,
+ DATA_ONLY, 0x0c,
+ DATA_ONLY, 0x0a,
+ DATA_ONLY, 0x10,
+ DATA_ONLY, 0x0e,
+ DATA_ONLY, 0x17,
+ DATA_ONLY, 0x13,
+ DATA_ONLY, 0x1f,
+ DATA_ONLY, 0x1a,
+ DATA_ONLY, 0x2a,
+ DATA_ONLY, 0x24,
+ DATA_ONLY, 0x1f,
+ DATA_ONLY, 0x1b,
+ DATA_ONLY, 0x1a,
+ DATA_ONLY, 0x17,
+
+ DATA_ONLY, 0x2b,
+ DATA_ONLY, 0x26,
+ DATA_ONLY, 0x22,
+ DATA_ONLY, 0x20,
+ DATA_ONLY, 0x3a,
+ DATA_ONLY, 0x34,
+ DATA_ONLY, 0x30,
+ DATA_ONLY, 0x2c,
+ DATA_ONLY, 0x29,
+ DATA_ONLY, 0x26,
+ DATA_ONLY, 0x25,
+ DATA_ONLY, 0x23,
+ DATA_ONLY, 0x21,
+ DATA_ONLY, 0x20,
+ DATA_ONLY, 0x1e,
+ DATA_ONLY, 0x1e,
+
+ 0xb8, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x11,
+ DATA_ONLY, 0x22,
+ DATA_ONLY, 0x33,
+ DATA_ONLY, 0x44,
+ DATA_ONLY, 0x44,
+ DATA_ONLY, 0x44,
+
+ DATA_ONLY, 0x55,
+ DATA_ONLY, 0x55,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+
+ 0xb9, 0x2c,
+ DATA_ONLY, 0x12,
+ DATA_ONLY, 0x0c,
+ DATA_ONLY, 0x0a,
+ DATA_ONLY, 0x10,
+ DATA_ONLY, 0x0e,
+ DATA_ONLY, 0x17,
+ DATA_ONLY, 0x13,
+ DATA_ONLY, 0x1f,
+ DATA_ONLY, 0x1a,
+ DATA_ONLY, 0x2a,
+ DATA_ONLY, 0x24,
+ DATA_ONLY, 0x1f,
+ DATA_ONLY, 0x1b,
+ DATA_ONLY, 0x1a,
+ DATA_ONLY, 0x17,
+
+ DATA_ONLY, 0x2b,
+ DATA_ONLY, 0x26,
+ DATA_ONLY, 0x22,
+ DATA_ONLY, 0x20,
+ DATA_ONLY, 0x3a,
+ DATA_ONLY, 0x34,
+ DATA_ONLY, 0x30,
+ DATA_ONLY, 0x2c,
+ DATA_ONLY, 0x29,
+ DATA_ONLY, 0x26,
+ DATA_ONLY, 0x25,
+ DATA_ONLY, 0x23,
+ DATA_ONLY, 0x21,
+ DATA_ONLY, 0x20,
+ DATA_ONLY, 0x1e,
+ DATA_ONLY, 0x1e,
+
+ 0xba, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x11,
+ DATA_ONLY, 0x22,
+ DATA_ONLY, 0x33,
+ DATA_ONLY, 0x44,
+ DATA_ONLY, 0x44,
+ DATA_ONLY, 0x44,
+
+ DATA_ONLY, 0x55,
+ DATA_ONLY, 0x55,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+ DATA_ONLY, 0x66,
+
+ 0xc1, 0x4d,
+ DATA_ONLY, 0x96,
+ DATA_ONLY, 0x1d,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x01,
+ DATA_ONLY, 0xdf,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x03,
+ DATA_ONLY, 0x1f,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x00,
+ DATA_ONLY, 0x03,
+ DATA_ONLY, 0x06,
+ DATA_ONLY, 0x09,
+ DATA_ONLY, 0x0d,
+ DATA_ONLY, 0x0f,
+ DATA_ONLY, 0x12,
+ DATA_ONLY, 0x15,
+ DATA_ONLY, 0x18,
+
+ 0xb2, 0x10,
+ DATA_ONLY, 0x10,
+ DATA_ONLY, 0x0b,
+ DATA_ONLY, 0x05,
+
+ ENDDEF, 0x0000
+};
+
+static const unsigned short SEQ_ACL_ON[] = {
+ /* ACL on */
+ 0xc0, 0x01,
+
+ ENDDEF, 0x0000
+};
+
+static const unsigned short SEQ_ACL_OFF[] = {
+ /* ACL off */
+ 0xc0, 0x00,
+
+ ENDDEF, 0x0000
+};
+
+static const unsigned short SEQ_ELVSS_ON[] = {
+ /* ELVSS on */
+ 0xb1, 0x0b,
+
+ ENDDEF, 0x0000
+};
+
+static const unsigned short SEQ_ELVSS_OFF[] = {
+ /* ELVSS off */
+ 0xb1, 0x0a,
+
+ ENDDEF, 0x0000
+};
+
+static const unsigned short SEQ_STAND_BY_OFF[] = {
+ 0x11, COMMAND_ONLY,
+
+ ENDDEF, 0x0000
+};
+
+static const unsigned short SEQ_STAND_BY_ON[] = {
+ 0x10, COMMAND_ONLY,
+
+ ENDDEF, 0x0000
+};
+
+static const unsigned short SEQ_DISPLAY_ON[] = {
+ 0x29, COMMAND_ONLY,
+
+ ENDDEF, 0x0000
+};
+
+
+static int s6e63m0_spi_write_byte(struct s6e63m0 *lcd, int addr, int data)
+{
+ u16 buf[1];
+ struct spi_message msg;
+
+ struct spi_transfer xfer = {
+ .len = 2,
+ .tx_buf = buf,
+ };
+
+ buf[0] = (addr << 8) | data;
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfer, &msg);
+
+ return spi_sync(lcd->spi, &msg);
+}
+
+static int s6e63m0_spi_write(struct s6e63m0 *lcd, unsigned char address,
+ unsigned char command)
+{
+ int ret = 0;
+
+ if (address != DATA_ONLY)
+ ret = s6e63m0_spi_write_byte(lcd, 0x0, address);
+ if (command != COMMAND_ONLY)
+ ret = s6e63m0_spi_write_byte(lcd, 0x1, command);
+
+ return ret;
+}
+
+static int s6e63m0_panel_send_sequence(struct s6e63m0 *lcd,
+ const unsigned short *wbuf)
+{
+ int ret = 0, i = 0;
+
+ while ((wbuf[i] & DEFMASK) != ENDDEF) {
+ if ((wbuf[i] & DEFMASK) != SLEEPMSEC) {
+ ret = s6e63m0_spi_write(lcd, wbuf[i], wbuf[i+1]);
+ if (ret)
+ break;
+ } else
+ udelay(wbuf[i+1]*1000);
+ i += 2;
+ }
+
+ return ret;
+}
+
+static int _s6e63m0_gamma_ctl(struct s6e63m0 *lcd, const unsigned int *gamma)
+{
+ unsigned int i = 0;
+ int ret = 0;
+
+ /* disable gamma table updating. */
+ ret = s6e63m0_spi_write(lcd, 0xfa, 0x00);
+ if (ret) {
+ dev_err(lcd->dev, "failed to disable gamma table updating.\n");
+ goto gamma_err;
+ }
+
+ for (i = 0 ; i < GAMMA_TABLE_COUNT; i++) {
+ ret = s6e63m0_spi_write(lcd, DATA_ONLY, gamma[i]);
+ if (ret) {
+ dev_err(lcd->dev, "failed to set gamma table.\n");
+ goto gamma_err;
+ }
+ }
+
+ /* update gamma table. */
+ ret = s6e63m0_spi_write(lcd, 0xfa, 0x01);
+ if (ret)
+ dev_err(lcd->dev, "failed to update gamma table.\n");
+
+gamma_err:
+ return ret;
+}
+
+static int s6e63m0_gamma_ctl(struct s6e63m0 *lcd, int gamma)
+{
+ int ret = 0;
+
+ ret = _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_22_table[gamma]);
+
+ return ret;
+}
+
+
+static int s6e63m0_ldi_init(struct s6e63m0 *lcd)
+{
+ int ret, i;
+ const unsigned short *init_seq[] = {
+ SEQ_PANEL_CONDITION_SET,
+ SEQ_DISPLAY_CONDITION_SET,
+ SEQ_GAMMA_SETTING,
+ SEQ_ETC_CONDITION_SET,
+ SEQ_ACL_ON,
+ SEQ_ELVSS_ON,
+ };
+
+ for (i = 0; i < ARRAY_SIZE(init_seq); i++) {
+ ret = s6e63m0_panel_send_sequence(lcd, init_seq[i]);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+static int s6e63m0_ldi_enable(struct s6e63m0 *lcd)
+{
+ int ret = 0, i;
+ const unsigned short *enable_seq[] = {
+ SEQ_STAND_BY_OFF,
+ SEQ_DISPLAY_ON,
+ };
+
+ for (i = 0; i < ARRAY_SIZE(enable_seq); i++) {
+ ret = s6e63m0_panel_send_sequence(lcd, enable_seq[i]);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+static int s6e63m0_ldi_disable(struct s6e63m0 *lcd)
+{
+ int ret;
+
+ ret = s6e63m0_panel_send_sequence(lcd, SEQ_STAND_BY_ON);
+
+ return ret;
+}
+
+static int s6e63m0_power_on(struct s6e63m0 *lcd)
+{
+ int ret = 0;
+ struct lcd_platform_data *pd = NULL;
+ struct backlight_device *bd = NULL;
+
+ pd = lcd->lcd_pd;
+ if (!pd) {
+ dev_err(lcd->dev, "platform data is NULL.\n");
+ return -EFAULT;
+ }
+
+ bd = lcd->bd;
+ if (!bd) {
+ dev_err(lcd->dev, "backlight device is NULL.\n");
+ return -EFAULT;
+ }
+
+ if (!pd->power_on) {
+ dev_err(lcd->dev, "power_on is NULL.\n");
+ return -EFAULT;
+ } else {
+ pd->power_on(lcd->ld, 1);
+ mdelay(pd->power_on_delay);
+ }
+
+ if (!pd->reset) {
+ dev_err(lcd->dev, "reset is NULL.\n");
+ return -EFAULT;
+ } else {
+ pd->reset(lcd->ld);
+ mdelay(pd->reset_delay);
+ }
+
+ ret = s6e63m0_ldi_init(lcd);
+ if (ret) {
+ dev_err(lcd->dev, "failed to initialize ldi.\n");
+ return ret;
+ }
+
+ ret = s6e63m0_ldi_enable(lcd);
+ if (ret) {
+ dev_err(lcd->dev, "failed to enable ldi.\n");
+ return ret;
+ }
+
+ /* set brightness to current value after power on or resume. */
+ ret = s6e63m0_gamma_ctl(lcd, bd->props.brightness);
+ if (ret) {
+ dev_err(lcd->dev, "lcd gamma setting failed.\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int s6e63m0_power_off(struct s6e63m0 *lcd)
+{
+ int ret = 0;
+ struct lcd_platform_data *pd = NULL;
+
+ pd = lcd->lcd_pd;
+ if (!pd) {
+ dev_err(lcd->dev, "platform data is NULL.\n");
+ return -EFAULT;
+ }
+
+ ret = s6e63m0_ldi_disable(lcd);
+ if (ret) {
+ dev_err(lcd->dev, "lcd setting failed.\n");
+ return -EIO;
+ }
+
+ mdelay(pd->power_off_delay);
+
+ if (!pd->power_on) {
+ dev_err(lcd->dev, "power_on is NULL.\n");
+ return -EFAULT;
+ } else
+ pd->power_on(lcd->ld, 0);
+
+ return 0;
+}
+
+static int s6e63m0_power(struct s6e63m0 *lcd, int power)
+{
+ int ret = 0;
+
+ if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
+ ret = s6e63m0_power_on(lcd);
+ else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
+ ret = s6e63m0_power_off(lcd);
+
+ if (!ret)
+ lcd->power = power;
+
+ return ret;
+}
+
+static int s6e63m0_set_power(struct lcd_device *ld, int power)
+{
+ struct s6e63m0 *lcd = lcd_get_data(ld);
+
+ if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN &&
+ power != FB_BLANK_NORMAL) {
+ dev_err(lcd->dev, "power value should be 0, 1 or 4.\n");
+ return -EINVAL;
+ }
+
+ return s6e63m0_power(lcd, power);
+}
+
+static int s6e63m0_get_power(struct lcd_device *ld)
+{
+ struct s6e63m0 *lcd = lcd_get_data(ld);
+
+ return lcd->power;
+}
+
+static int s6e63m0_get_brightness(struct backlight_device *bd)
+{
+ return bd->props.brightness;
+}
+
+static int s6e63m0_set_brightness(struct backlight_device *bd)
+{
+ int ret = 0, brightness = bd->props.brightness;
+ struct s6e63m0 *lcd = bl_get_data(bd);
+
+ if (brightness < MIN_BRIGHTNESS ||
+ brightness > bd->props.max_brightness) {
+ dev_err(&bd->dev, "lcd brightness should be %d to %d.\n",
+ MIN_BRIGHTNESS, MAX_BRIGHTNESS);
+ return -EINVAL;
+ }
+
+ ret = s6e63m0_gamma_ctl(lcd, bd->props.brightness);
+ if (ret) {
+ dev_err(&bd->dev, "lcd brightness setting failed.\n");
+ return -EIO;
+ }
+
+ return ret;
+}
+
+static struct lcd_ops s6e63m0_lcd_ops = {
+ .set_power = s6e63m0_set_power,
+ .get_power = s6e63m0_get_power,
+};
+
+static const struct backlight_ops s6e63m0_backlight_ops = {
+ .get_brightness = s6e63m0_get_brightness,
+ .update_status = s6e63m0_set_brightness,
+};
+
+static ssize_t s6e63m0_sysfs_show_gamma_mode(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct s6e63m0 *lcd = dev_get_drvdata(dev);
+ char temp[10];
+
+ switch (lcd->gamma_mode) {
+ case 0:
+ sprintf(temp, "2.2 mode\n");
+ strcat(buf, temp);
+ break;
+ case 1:
+ sprintf(temp, "1.9 mode\n");
+ strcat(buf, temp);
+ break;
+ case 2:
+ sprintf(temp, "1.7 mode\n");
+ strcat(buf, temp);
+ break;
+ default:
+ dev_info(dev, "gamma mode could be 0:2.2, 1:1.9 or 2:1.7)n");
+ break;
+ }
+
+ return strlen(buf);
+}
+
+static ssize_t s6e63m0_sysfs_store_gamma_mode(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct s6e63m0 *lcd = dev_get_drvdata(dev);
+ struct backlight_device *bd = NULL;
+ int brightness, rc;
+
+ rc = strict_strtoul(buf, 0, (unsigned long *)&lcd->gamma_mode);
+ if (rc < 0)
+ return rc;
+
+ bd = lcd->bd;
+
+ brightness = bd->props.brightness;
+
+ switch (lcd->gamma_mode) {
+ case 0:
+ _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_22_table[brightness]);
+ break;
+ case 1:
+ _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_19_table[brightness]);
+ break;
+ case 2:
+ _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_17_table[brightness]);
+ break;
+ default:
+ dev_info(dev, "gamma mode could be 0:2.2, 1:1.9 or 2:1.7\n");
+ _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_22_table[brightness]);
+ break;
+ }
+ return len;
+}
+
+static DEVICE_ATTR(gamma_mode, 0644,
+ s6e63m0_sysfs_show_gamma_mode, s6e63m0_sysfs_store_gamma_mode);
+
+static ssize_t s6e63m0_sysfs_show_gamma_table(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct s6e63m0 *lcd = dev_get_drvdata(dev);
+ char temp[3];
+
+ sprintf(temp, "%d\n", lcd->gamma_table_count);
+ strcpy(buf, temp);
+
+ return strlen(buf);
+}
+static DEVICE_ATTR(gamma_table, 0644,
+ s6e63m0_sysfs_show_gamma_table, NULL);
+
+static int __init s6e63m0_probe(struct spi_device *spi)
+{
+ int ret = 0;
+ struct s6e63m0 *lcd = NULL;
+ struct lcd_device *ld = NULL;
+ struct backlight_device *bd = NULL;
+
+ lcd = kzalloc(sizeof(struct s6e63m0), GFP_KERNEL);
+ if (!lcd)
+ return -ENOMEM;
+
+ /* s6e63m0 lcd panel uses 3-wire 9bits SPI Mode. */
+ spi->bits_per_word = 9;
+
+ ret = spi_setup(spi);
+ if (ret < 0) {
+ dev_err(&spi->dev, "spi setup failed.\n");
+ goto out_free_lcd;
+ }
+
+ lcd->spi = spi;
+ lcd->dev = &spi->dev;
+
+ lcd->lcd_pd = (struct lcd_platform_data *)spi->dev.platform_data;
+ if (!lcd->lcd_pd) {
+ dev_err(&spi->dev, "platform data is NULL.\n");
+ goto out_free_lcd;
+ }
+
+ ld = lcd_device_register("s6e63m0", &spi->dev, lcd, &s6e63m0_lcd_ops);
+ if (IS_ERR(ld)) {
+ ret = PTR_ERR(ld);
+ goto out_free_lcd;
+ }
+
+ lcd->ld = ld;
+
+ bd = backlight_device_register("s6e63m0bl-bl", &spi->dev, lcd,
+ &s6e63m0_backlight_ops, NULL);
+ if (IS_ERR(bd)) {
+ ret = PTR_ERR(bd);
+ goto out_lcd_unregister;
+ }
+
+ bd->props.max_brightness = MAX_BRIGHTNESS;
+ bd->props.brightness = MAX_BRIGHTNESS;
+ lcd->bd = bd;
+
+ /*
+ * it gets gamma table count available so it gets user
+ * know that.
+ */
+ lcd->gamma_table_count =
+ sizeof(gamma_table) / (MAX_GAMMA_LEVEL * sizeof(int));
+
+ ret = device_create_file(&(spi->dev), &dev_attr_gamma_mode);
+ if (ret < 0)
+ dev_err(&(spi->dev), "failed to add sysfs entries\n");
+
+ ret = device_create_file(&(spi->dev), &dev_attr_gamma_table);
+ if (ret < 0)
+ dev_err(&(spi->dev), "failed to add sysfs entries\n");
+
+ /*
+ * if lcd panel was on from bootloader like u-boot then
+ * do not lcd on.
+ */
+ if (!lcd->lcd_pd->lcd_enabled) {
+ /*
+ * if lcd panel was off from bootloader then
+ * current lcd status is powerdown and then
+ * it enables lcd panel.
+ */
+ lcd->power = FB_BLANK_POWERDOWN;
+
+ s6e63m0_power(lcd, FB_BLANK_UNBLANK);
+ } else
+ lcd->power = FB_BLANK_UNBLANK;
+
+ dev_set_drvdata(&spi->dev, lcd);
+
+ dev_info(&spi->dev, "s6e63m0 panel driver has been probed.\n");
+
+ return 0;
+
+out_lcd_unregister:
+ lcd_device_unregister(ld);
+out_free_lcd:
+ kfree(lcd);
+ return ret;
+}
+
+static int __devexit s6e63m0_remove(struct spi_device *spi)
+{
+ struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev);
+
+ s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
+ lcd_device_unregister(lcd->ld);
+ kfree(lcd);
+
+ return 0;
+}
+
+#if defined(CONFIG_PM)
+unsigned int before_power;
+
+static int s6e63m0_suspend(struct spi_device *spi, pm_message_t mesg)
+{
+ int ret = 0;
+ struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev);
+
+ dev_dbg(&spi->dev, "lcd->power = %d\n", lcd->power);
+
+ before_power = lcd->power;
+
+ /*
+ * when lcd panel is suspend, lcd panel becomes off
+ * regardless of status.
+ */
+ ret = s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
+
+ return ret;
+}
+
+static int s6e63m0_resume(struct spi_device *spi)
+{
+ int ret = 0;
+ struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev);
+
+ /*
+ * after suspended, if lcd panel status is FB_BLANK_UNBLANK
+ * (at that time, before_power is FB_BLANK_UNBLANK) then
+ * it changes that status to FB_BLANK_POWERDOWN to get lcd on.
+ */
+ if (before_power == FB_BLANK_UNBLANK)
+ lcd->power = FB_BLANK_POWERDOWN;
+
+ dev_dbg(&spi->dev, "before_power = %d\n", before_power);
+
+ ret = s6e63m0_power(lcd, before_power);
+
+ return ret;
+}
+#else
+#define s6e63m0_suspend NULL
+#define s6e63m0_resume NULL
+#endif
+
+/* Power down all displays on reboot, poweroff or halt. */
+static void s6e63m0_shutdown(struct spi_device *spi)
+{
+ struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev);
+
+ s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
+}
+
+static struct spi_driver s6e63m0_driver = {
+ .driver = {
+ .name = "s6e63m0",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = s6e63m0_probe,
+ .remove = __devexit_p(s6e63m0_remove),
+ .shutdown = s6e63m0_shutdown,
+ .suspend = s6e63m0_suspend,
+ .resume = s6e63m0_resume,
+};
+
+static int __init s6e63m0_init(void)
+{
+ return spi_register_driver(&s6e63m0_driver);
+}
+
+static void __exit s6e63m0_exit(void)
+{
+ spi_unregister_driver(&s6e63m0_driver);
+}
+
+module_init(s6e63m0_init);
+module_exit(s6e63m0_exit);
+
+MODULE_AUTHOR("InKi Dae <inki.dae@samsung.com>");
+MODULE_DESCRIPTION("S6E63M0 LCD Driver");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/video/backlight/s6e63m0_gamma.h b/drivers/video/backlight/s6e63m0_gamma.h
new file mode 100644
index 0000000..2c44bdb
--- /dev/null
+++ b/drivers/video/backlight/s6e63m0_gamma.h
@@ -0,0 +1,266 @@
+/* linux/drivers/video/samsung/s6e63m0_brightness.h
+ *
+ * Gamma level definitions.
+ *
+ * Copyright (c) 2009 Samsung Electronics
+ * InKi Dae <inki.dae@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _S6E63M0_BRIGHTNESS_H
+#define _S6E63M0_BRIGHTNESS_H
+
+#define MAX_GAMMA_LEVEL 11
+#define GAMMA_TABLE_COUNT 21
+
+/* gamma value: 2.2 */
+static const unsigned int s6e63m0_22_300[] = {
+ 0x18, 0x08, 0x24, 0x5f, 0x50, 0x2d, 0xB6,
+ 0xB9, 0xA7, 0xAd, 0xB1, 0x9f, 0xbe, 0xC0,
+ 0xB5, 0x00, 0xa0, 0x00, 0xa4, 0x00, 0xdb
+};
+
+static const unsigned int s6e63m0_22_280[] = {
+ 0x18, 0x08, 0x24, 0x64, 0x56, 0x33, 0xB6,
+ 0xBA, 0xA8, 0xAC, 0xB1, 0x9D, 0xC1, 0xC1,
+ 0xB7, 0x00, 0x9C, 0x00, 0x9F, 0x00, 0xD6
+};
+
+static const unsigned int s6e63m0_22_260[] = {
+ 0x18, 0x08, 0x24, 0x66, 0x58, 0x34, 0xB6,
+ 0xBA, 0xA7, 0xAF, 0xB3, 0xA0, 0xC1, 0xC2,
+ 0xB7, 0x00, 0x97, 0x00, 0x9A, 0x00, 0xD1
+
+};
+
+static const unsigned int s6e63m0_22_240[] = {
+ 0x18, 0x08, 0x24, 0x62, 0x54, 0x30, 0xB9,
+ 0xBB, 0xA9, 0xB0, 0xB3, 0xA1, 0xC1, 0xC3,
+ 0xB7, 0x00, 0x91, 0x00, 0x95, 0x00, 0xDA
+
+};
+static const unsigned int s6e63m0_22_220[] = {
+ 0x18, 0x08, 0x24, 0x63, 0x53, 0x31, 0xB8,
+ 0xBC, 0xA9, 0xB0, 0xB5, 0xA2, 0xC4, 0xC4,
+ 0xB8, 0x00, 0x8B, 0x00, 0x8E, 0x00, 0xC2
+};
+
+static const unsigned int s6e63m0_22_200[] = {
+ 0x18, 0x08, 0x24, 0x66, 0x55, 0x34, 0xBA,
+ 0xBD, 0xAB, 0xB1, 0xB5, 0xA3, 0xC5, 0xC6,
+ 0xB9, 0x00, 0x85, 0x00, 0x88, 0x00, 0xBA
+};
+
+static const unsigned int s6e63m0_22_170[] = {
+ 0x18, 0x08, 0x24, 0x69, 0x54, 0x37, 0xBB,
+ 0xBE, 0xAC, 0xB4, 0xB7, 0xA6, 0xC7, 0xC8,
+ 0xBC, 0x00, 0x7B, 0x00, 0x7E, 0x00, 0xAB
+};
+
+static const unsigned int s6e63m0_22_140[] = {
+ 0x18, 0x08, 0x24, 0x6C, 0x54, 0x3A, 0xBC,
+ 0xBF, 0xAC, 0xB7, 0xBB, 0xA9, 0xC9, 0xC9,
+ 0xBE, 0x00, 0x71, 0x00, 0x73, 0x00, 0x9E
+};
+
+static const unsigned int s6e63m0_22_110[] = {
+ 0x18, 0x08, 0x24, 0x70, 0x51, 0x3E, 0xBF,
+ 0xC1, 0xAF, 0xB9, 0xBC, 0xAB, 0xCC, 0xCC,
+ 0xC2, 0x00, 0x65, 0x00, 0x67, 0x00, 0x8D
+};
+
+static const unsigned int s6e63m0_22_90[] = {
+ 0x18, 0x08, 0x24, 0x73, 0x4A, 0x3D, 0xC0,
+ 0xC2, 0xB1, 0xBB, 0xBE, 0xAC, 0xCE, 0xCF,
+ 0xC5, 0x00, 0x5D, 0x00, 0x5E, 0x00, 0x82
+};
+
+static const unsigned int s6e63m0_22_30[] = {
+ 0x18, 0x08, 0x24, 0x78, 0xEC, 0x3D, 0xC8,
+ 0xC2, 0xB6, 0xC4, 0xC7, 0xB6, 0xD5, 0xD7,
+ 0xCC, 0x00, 0x39, 0x00, 0x36, 0x00, 0x51
+};
+
+/* gamma value: 1.9 */
+static const unsigned int s6e63m0_19_300[] = {
+ 0x18, 0x08, 0x24, 0x61, 0x5F, 0x39, 0xBA,
+ 0xBD, 0xAD, 0xB1, 0xB6, 0xA5, 0xC4, 0xC5,
+ 0xBC, 0x00, 0xA0, 0x00, 0xA4, 0x00, 0xDB
+};
+
+static const unsigned int s6e63m0_19_280[] = {
+ 0x18, 0x08, 0x24, 0x61, 0x60, 0x39, 0xBB,
+ 0xBE, 0xAD, 0xB2, 0xB6, 0xA6, 0xC5, 0xC7,
+ 0xBD, 0x00, 0x9B, 0x00, 0x9E, 0x00, 0xD5
+};
+
+static const unsigned int s6e63m0_19_260[] = {
+ 0x18, 0x08, 0x24, 0x63, 0x61, 0x3B, 0xBA,
+ 0xBE, 0xAC, 0xB3, 0xB8, 0xA7, 0xC6, 0xC8,
+ 0xBD, 0x00, 0x96, 0x00, 0x98, 0x00, 0xCF
+};
+
+static const unsigned int s6e63m0_19_240[] = {
+ 0x18, 0x08, 0x24, 0x67, 0x64, 0x3F, 0xBB,
+ 0xBE, 0xAD, 0xB3, 0xB9, 0xA7, 0xC8, 0xC9,
+ 0xBE, 0x00, 0x90, 0x00, 0x92, 0x00, 0xC8
+};
+
+static const unsigned int s6e63m0_19_220[] = {
+ 0x18, 0x08, 0x24, 0x68, 0x64, 0x40, 0xBC,
+ 0xBF, 0xAF, 0xB4, 0xBA, 0xA9, 0xC8, 0xCA,
+ 0xBE, 0x00, 0x8B, 0x00, 0x8C, 0x00, 0xC0
+};
+
+static const unsigned int s6e63m0_19_200[] = {
+ 0x18, 0x08, 0x24, 0x68, 0x64, 0x3F, 0xBE,
+ 0xC0, 0xB0, 0xB6, 0xBB, 0xAB, 0xC8, 0xCB,
+ 0xBF, 0x00, 0x85, 0x00, 0x86, 0x00, 0xB8
+};
+
+static const unsigned int s6e63m0_19_170[] = {
+ 0x18, 0x08, 0x24, 0x69, 0x64, 0x40, 0xBF,
+ 0xC1, 0xB0, 0xB9, 0xBE, 0xAD, 0xCB, 0xCD,
+ 0xC2, 0x00, 0x7A, 0x00, 0x7B, 0x00, 0xAA
+};
+
+static const unsigned int s6e63m0_19_140[] = {
+ 0x18, 0x08, 0x24, 0x6E, 0x65, 0x45, 0xC0,
+ 0xC3, 0xB2, 0xBA, 0xBE, 0xAE, 0xCD, 0xD0,
+ 0xC4, 0x00, 0x70, 0x00, 0x70, 0x00, 0x9C
+};
+
+static const unsigned int s6e63m0_19_110[] = {
+ 0x18, 0x08, 0x24, 0x6F, 0x65, 0x46, 0xC2,
+ 0xC4, 0xB3, 0xBF, 0xC2, 0xB2, 0xCF, 0xD1,
+ 0xC6, 0x00, 0x64, 0x00, 0x64, 0x00, 0x8D
+};
+
+static const unsigned int s6e63m0_19_90[] = {
+ 0x18, 0x08, 0x24, 0x74, 0x60, 0x4A, 0xC3,
+ 0xC6, 0xB5, 0xBF, 0xC3, 0xB2, 0xD2, 0xD3,
+ 0xC8, 0x00, 0x5B, 0x00, 0x5B, 0x00, 0x81
+};
+
+static const unsigned int s6e63m0_19_30[] = {
+ 0x18, 0x08, 0x24, 0x84, 0x45, 0x4F, 0xCA,
+ 0xCB, 0xBC, 0xC9, 0xCB, 0xBC, 0xDA, 0xDA,
+ 0xD0, 0x00, 0x35, 0x00, 0x34, 0x00, 0x4E
+};
+
+/* gamma value: 1.7 */
+static const unsigned int s6e63m0_17_300[] = {
+ 0x18, 0x08, 0x24, 0x70, 0x70, 0x4F, 0xBF,
+ 0xC2, 0xB2, 0xB8, 0xBC, 0xAC, 0xCB, 0xCD,
+ 0xC3, 0x00, 0xA0, 0x00, 0xA4, 0x00, 0xDB
+};
+
+static const unsigned int s6e63m0_17_280[] = {
+ 0x18, 0x08, 0x24, 0x71, 0x71, 0x50, 0xBF,
+ 0xC2, 0xB2, 0xBA, 0xBE, 0xAE, 0xCB, 0xCD,
+ 0xC3, 0x00, 0x9C, 0x00, 0x9F, 0x00, 0xD6
+};
+
+static const unsigned int s6e63m0_17_260[] = {
+ 0x18, 0x08, 0x24, 0x72, 0x72, 0x50, 0xC0,
+ 0xC3, 0xB4, 0xB9, 0xBE, 0xAE, 0xCC, 0xCF,
+ 0xC4, 0x00, 0x97, 0x00, 0x9A, 0x00, 0xD1
+};
+
+static const unsigned int s6e63m0_17_240[] = {
+ 0x18, 0x08, 0x24, 0x71, 0x72, 0x4F, 0xC2,
+ 0xC4, 0xB5, 0xBB, 0xBF, 0xB0, 0xCC, 0xCF,
+ 0xC3, 0x00, 0x91, 0x00, 0x95, 0x00, 0xCA
+};
+
+static const unsigned int s6e63m0_17_220[] = {
+ 0x18, 0x08, 0x24, 0x71, 0x73, 0x4F, 0xC2,
+ 0xC5, 0xB5, 0xBD, 0xC0, 0xB2, 0xCD, 0xD1,
+ 0xC5, 0x00, 0x8B, 0x00, 0x8E, 0x00, 0xC2
+};
+
+static const unsigned int s6e63m0_17_200[] = {
+ 0x18, 0x08, 0x24, 0x72, 0x75, 0x51, 0xC2,
+ 0xC6, 0xB5, 0xBF, 0xC1, 0xB3, 0xCE, 0xD1,
+ 0xC6, 0x00, 0x85, 0x00, 0x88, 0x00, 0xBA
+};
+
+static const unsigned int s6e63m0_17_170[] = {
+ 0x18, 0x08, 0x24, 0x75, 0x77, 0x54, 0xC3,
+ 0xC7, 0xB7, 0xC0, 0xC3, 0xB4, 0xD1, 0xD3,
+ 0xC9, 0x00, 0x7B, 0x00, 0x7E, 0x00, 0xAB
+};
+
+static const unsigned int s6e63m0_17_140[] = {
+ 0x18, 0x08, 0x24, 0x7B, 0x77, 0x58, 0xC3,
+ 0xC8, 0xB8, 0xC2, 0xC6, 0xB6, 0xD3, 0xD4,
+ 0xCA, 0x00, 0x71, 0x00, 0x73, 0x00, 0x9E
+};
+
+static const unsigned int s6e63m0_17_110[] = {
+ 0x18, 0x08, 0x24, 0x81, 0x7B, 0x5D, 0xC6,
+ 0xCA, 0xBB, 0xC3, 0xC7, 0xB8, 0xD6, 0xD8,
+ 0xCD, 0x00, 0x65, 0x00, 0x67, 0x00, 0x8D
+};
+
+static const unsigned int s6e63m0_17_90[] = {
+ 0x18, 0x08, 0x24, 0x82, 0x7A, 0x5B, 0xC8,
+ 0xCB, 0xBD, 0xC5, 0xCA, 0xBA, 0xD6, 0xD8,
+ 0xCE, 0x00, 0x5D, 0x00, 0x5E, 0x00, 0x82
+};
+
+static const unsigned int s6e63m0_17_30[] = {
+ 0x18, 0x08, 0x24, 0x8F, 0x73, 0x63, 0xD1,
+ 0xD0, 0xC5, 0xCC, 0xD1, 0xC2, 0xDE, 0xE0,
+ 0xD6, 0x00, 0x39, 0x00, 0x36, 0x00, 0x51
+};
+
+struct s6e63m0_gamma {
+ unsigned int *gamma_22_table[MAX_GAMMA_LEVEL];
+ unsigned int *gamma_19_table[MAX_GAMMA_LEVEL];
+ unsigned int *gamma_17_table[MAX_GAMMA_LEVEL];
+};
+
+static struct s6e63m0_gamma gamma_table = {
+ .gamma_22_table[0] = (unsigned int *)&s6e63m0_22_30,
+ .gamma_22_table[1] = (unsigned int *)&s6e63m0_22_90,
+ .gamma_22_table[2] = (unsigned int *)&s6e63m0_22_110,
+ .gamma_22_table[3] = (unsigned int *)&s6e63m0_22_140,
+ .gamma_22_table[4] = (unsigned int *)&s6e63m0_22_170,
+ .gamma_22_table[5] = (unsigned int *)&s6e63m0_22_200,
+ .gamma_22_table[6] = (unsigned int *)&s6e63m0_22_220,
+ .gamma_22_table[7] = (unsigned int *)&s6e63m0_22_240,
+ .gamma_22_table[8] = (unsigned int *)&s6e63m0_22_260,
+ .gamma_22_table[9] = (unsigned int *)&s6e63m0_22_280,
+ .gamma_22_table[10] = (unsigned int *)&s6e63m0_22_300,
+
+ .gamma_19_table[0] = (unsigned int *)&s6e63m0_19_30,
+ .gamma_19_table[1] = (unsigned int *)&s6e63m0_19_90,
+ .gamma_19_table[2] = (unsigned int *)&s6e63m0_19_110,
+ .gamma_19_table[3] = (unsigned int *)&s6e63m0_19_140,
+ .gamma_19_table[4] = (unsigned int *)&s6e63m0_19_170,
+ .gamma_19_table[5] = (unsigned int *)&s6e63m0_19_200,
+ .gamma_19_table[6] = (unsigned int *)&s6e63m0_19_220,
+ .gamma_19_table[7] = (unsigned int *)&s6e63m0_19_240,
+ .gamma_19_table[8] = (unsigned int *)&s6e63m0_19_260,
+ .gamma_19_table[9] = (unsigned int *)&s6e63m0_19_280,
+ .gamma_19_table[10] = (unsigned int *)&s6e63m0_19_300,
+
+ .gamma_17_table[0] = (unsigned int *)&s6e63m0_17_30,
+ .gamma_17_table[1] = (unsigned int *)&s6e63m0_17_90,
+ .gamma_17_table[2] = (unsigned int *)&s6e63m0_17_110,
+ .gamma_17_table[3] = (unsigned int *)&s6e63m0_17_140,
+ .gamma_17_table[4] = (unsigned int *)&s6e63m0_17_170,
+ .gamma_17_table[5] = (unsigned int *)&s6e63m0_17_200,
+ .gamma_17_table[6] = (unsigned int *)&s6e63m0_17_220,
+ .gamma_17_table[7] = (unsigned int *)&s6e63m0_17_240,
+ .gamma_17_table[8] = (unsigned int *)&s6e63m0_17_260,
+ .gamma_17_table[9] = (unsigned int *)&s6e63m0_17_280,
+ .gamma_17_table[10] = (unsigned int *)&s6e63m0_17_300,
+};
+
+#endif
+
diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c
index e03e60b..2a04b38 100644
--- a/drivers/video/backlight/tosa_bl.c
+++ b/drivers/video/backlight/tosa_bl.c
@@ -119,7 +119,6 @@
err_reg:
data->bl = NULL;
- i2c_set_clientdata(client, NULL);
err_gpio_dir:
gpio_free(TOSA_GPIO_BL_C20MA);
err_gpio_bl:
@@ -133,7 +132,6 @@
backlight_device_unregister(data->bl);
data->bl = NULL;
- i2c_set_clientdata(client, NULL);
gpio_free(TOSA_GPIO_BL_C20MA);
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index 23b2a8c..b020ba7 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -501,7 +501,9 @@
static int __devinit bfin_bf54x_probe(struct platform_device *pdev)
{
+#ifndef NO_BL_SUPPORT
struct backlight_properties props;
+#endif
struct bfin_bf54xfb_info *info;
struct fb_info *fbinfo;
int ret;
@@ -654,7 +656,8 @@
printk(KERN_ERR DRIVER_NAME
": unable to register backlight.\n");
ret = -EINVAL;
- goto out9;
+ unregister_framebuffer(fbinfo);
+ goto out8;
}
lcd_dev = lcd_device_register(DRIVER_NAME, &pdev->dev, NULL, &bfin_lcd_ops);
@@ -663,8 +666,6 @@
return 0;
-out9:
- unregister_framebuffer(fbinfo);
out8:
free_irq(info->irq, info);
out7:
diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c
index c2ec3dcd..7a50272 100644
--- a/drivers/video/bfin-t350mcqb-fb.c
+++ b/drivers/video/bfin-t350mcqb-fb.c
@@ -420,7 +420,9 @@
static int __devinit bfin_t350mcqb_probe(struct platform_device *pdev)
{
+#ifndef NO_BL_SUPPORT
struct backlight_properties props;
+#endif
struct bfin_t350mcqbfb_info *info;
struct fb_info *fbinfo;
int ret;
@@ -550,7 +552,8 @@
printk(KERN_ERR DRIVER_NAME
": unable to register backlight.\n");
ret = -EINVAL;
- goto out9;
+ unregister_framebuffer(fbinfo);
+ goto out8;
}
lcd_dev = lcd_device_register(DRIVER_NAME, NULL, &bfin_lcd_ops);
@@ -559,8 +562,6 @@
return 0;
-out9:
- unregister_framebuffer(fbinfo);
out8:
free_irq(info->irq, info);
out7:
diff --git a/drivers/video/bw2.c b/drivers/video/bw2.c
index 2c371c0..09f1b9b 100644
--- a/drivers/video/bw2.c
+++ b/drivers/video/bw2.c
@@ -275,7 +275,7 @@
static int __devinit bw2_probe(struct of_device *op, const struct of_device_id *match)
{
- struct device_node *dp = op->node;
+ struct device_node *dp = op->dev.of_node;
struct fb_info *info;
struct bw2_par *par;
int linebytes, err;
diff --git a/drivers/video/cg14.c b/drivers/video/cg14.c
index d12e05b..e5dc224 100644
--- a/drivers/video/cg14.c
+++ b/drivers/video/cg14.c
@@ -465,7 +465,7 @@
static int __devinit cg14_probe(struct of_device *op, const struct of_device_id *match)
{
- struct device_node *dp = op->node;
+ struct device_node *dp = op->dev.of_node;
struct fb_info *info;
struct cg14_par *par;
int is_8mb, linebytes, i, err;
diff --git a/drivers/video/cg3.c b/drivers/video/cg3.c
index b98f93f..558d73a 100644
--- a/drivers/video/cg3.c
+++ b/drivers/video/cg3.c
@@ -349,7 +349,7 @@
static int __devinit cg3_probe(struct of_device *op,
const struct of_device_id *match)
{
- struct device_node *dp = op->node;
+ struct device_node *dp = op->dev.of_node;
struct fb_info *info;
struct cg3_par *par;
int linebytes, err;
diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c
index 1105a59..6b93ef9 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fb_defio.c
@@ -66,7 +66,7 @@
return 0;
}
-int fb_deferred_io_fsync(struct file *file, struct dentry *dentry, int datasync)
+int fb_deferred_io_fsync(struct file *file, int datasync)
{
struct fb_info *info = file->private_data;
@@ -100,6 +100,16 @@
/* protect against the workqueue changing the page list */
mutex_lock(&fbdefio->lock);
+ /*
+ * We want the page to remain locked from ->page_mkwrite until
+ * the PTE is marked dirty to avoid page_mkclean() being called
+ * before the PTE is updated, which would leave the page ignored
+ * by defio.
+ * Do this by locking the page here and informing the caller
+ * about it with VM_FAULT_LOCKED.
+ */
+ lock_page(page);
+
/* we loop through the pagelist before adding in order
to keep the pagelist sorted */
list_for_each_entry(cur, &fbdefio->pagelist, lru) {
@@ -121,7 +131,7 @@
/* come back after delay to process the deferred IO */
schedule_delayed_work(&info->deferred_work, fbdefio->delay);
- return 0;
+ return VM_FAULT_LOCKED;
}
static const struct vm_operations_struct fb_deferred_io_vm_ops = {
@@ -155,41 +165,25 @@
{
struct fb_info *info = container_of(work, struct fb_info,
deferred_work.work);
+ struct list_head *node, *next;
+ struct page *cur;
struct fb_deferred_io *fbdefio = info->fbdefio;
- struct page *page, *tmp_page;
- struct list_head *node, *tmp_node;
- struct list_head non_dirty;
-
- INIT_LIST_HEAD(&non_dirty);
/* here we mkclean the pages, then do all deferred IO */
mutex_lock(&fbdefio->lock);
- list_for_each_entry_safe(page, tmp_page, &fbdefio->pagelist, lru) {
- lock_page(page);
- /*
- * The workqueue callback can be triggered after a
- * ->page_mkwrite() call but before the PTE has been marked
- * dirty. In this case page_mkclean() won't "rearm" the page.
- *
- * To avoid this, remove those "non-dirty" pages from the
- * pagelist before calling the driver's callback, then add
- * them back to get processed on the next work iteration.
- * At that time, their PTEs will hopefully be dirty for real.
- */
- if (!page_mkclean(page))
- list_move_tail(&page->lru, &non_dirty);
- unlock_page(page);
+ list_for_each_entry(cur, &fbdefio->pagelist, lru) {
+ lock_page(cur);
+ page_mkclean(cur);
+ unlock_page(cur);
}
/* driver's callback with pagelist */
fbdefio->deferred_io(info, &fbdefio->pagelist);
- /* clear the list... */
- list_for_each_safe(node, tmp_node, &fbdefio->pagelist) {
+ /* clear the list */
+ list_for_each_safe(node, next, &fbdefio->pagelist) {
list_del(node);
}
- /* ... and add back the "non-dirty" pages to the list */
- list_splice_tail(&non_dirty, &fbdefio->pagelist);
mutex_unlock(&fbdefio->lock);
}
@@ -218,7 +212,6 @@
void fb_deferred_io_cleanup(struct fb_info *info)
{
struct fb_deferred_io *fbdefio = info->fbdefio;
- struct list_head *node, *tmp_node;
struct page *page;
int i;
@@ -226,13 +219,6 @@
cancel_delayed_work(&info->deferred_work);
flush_scheduled_work();
- /* the list may have still some non-dirty pages at this point */
- mutex_lock(&fbdefio->lock);
- list_for_each_safe(node, tmp_node, &fbdefio->pagelist) {
- list_del(node);
- }
- mutex_unlock(&fbdefio->lock);
-
/* clear out the mapping that we setup */
for (i = 0 ; i < info->fix.smem_len; i += PAGE_SIZE) {
page = fb_deferred_io_page(info, i);
diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c
index 76e7dac..70b1d9d 100644
--- a/drivers/video/geode/gxfb_core.c
+++ b/drivers/video/geode/gxfb_core.c
@@ -40,7 +40,7 @@
static int vt_switch;
/* Modes relevant to the GX (taken from modedb.c) */
-static struct fb_videomode gx_modedb[] __initdata = {
+static struct fb_videomode gx_modedb[] __devinitdata = {
/* 640x480-60 VESA */
{ NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2,
0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
@@ -110,14 +110,15 @@
#ifdef CONFIG_OLPC
#include <asm/olpc.h>
-static struct fb_videomode gx_dcon_modedb[] __initdata = {
+static struct fb_videomode gx_dcon_modedb[] __devinitdata = {
/* The only mode the DCON has is 1200x900 */
{ NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
FB_VMODE_NONINTERLACED, 0 }
};
-static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
+static void __devinit get_modedb(struct fb_videomode **modedb,
+ unsigned int *size)
{
if (olpc_has_dcon()) {
*modedb = (struct fb_videomode *) gx_dcon_modedb;
@@ -129,7 +130,8 @@
}
#else
-static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
+static void __devinit get_modedb(struct fb_videomode **modedb,
+ unsigned int *size)
{
*modedb = (struct fb_videomode *) gx_modedb;
*size = ARRAY_SIZE(gx_modedb);
@@ -226,7 +228,8 @@
return gx_blank_display(info, blank_mode);
}
-static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *dev)
+static int __devinit gxfb_map_video_memory(struct fb_info *info,
+ struct pci_dev *dev)
{
struct gxfb_par *par = info->par;
int ret;
@@ -290,7 +293,7 @@
.fb_imageblit = cfb_imageblit,
};
-static struct fb_info * __init gxfb_init_fbinfo(struct device *dev)
+static struct fb_info *__devinit gxfb_init_fbinfo(struct device *dev)
{
struct gxfb_par *par;
struct fb_info *info;
@@ -371,7 +374,8 @@
}
#endif
-static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+static int __devinit gxfb_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
{
struct gxfb_par *par;
struct fb_info *info;
@@ -451,7 +455,7 @@
return ret;
}
-static void gxfb_remove(struct pci_dev *pdev)
+static void __devexit gxfb_remove(struct pci_dev *pdev)
{
struct fb_info *info = pci_get_drvdata(pdev);
struct gxfb_par *par = info->par;
diff --git a/drivers/video/geode/lxfb_core.c b/drivers/video/geode/lxfb_core.c
index 1a18da8..39bdbed 100644
--- a/drivers/video/geode/lxfb_core.c
+++ b/drivers/video/geode/lxfb_core.c
@@ -35,7 +35,7 @@
* we try to make it something sane - 640x480-60 is sane
*/
-static struct fb_videomode geode_modedb[] __initdata = {
+static struct fb_videomode geode_modedb[] __devinitdata = {
/* 640x480-60 */
{ NULL, 60, 640, 480, 39682, 48, 8, 25, 2, 88, 2,
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
@@ -219,14 +219,15 @@
#ifdef CONFIG_OLPC
#include <asm/olpc.h>
-static struct fb_videomode olpc_dcon_modedb[] __initdata = {
+static struct fb_videomode olpc_dcon_modedb[] __devinitdata = {
/* The only mode the DCON has is 1200x900 */
{ NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
FB_VMODE_NONINTERLACED, 0 }
};
-static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
+static void __devinit get_modedb(struct fb_videomode **modedb,
+ unsigned int *size)
{
if (olpc_has_dcon()) {
*modedb = (struct fb_videomode *) olpc_dcon_modedb;
@@ -238,7 +239,8 @@
}
#else
-static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
+static void __devinit get_modedb(struct fb_videomode **modedb,
+ unsigned int *size)
{
*modedb = (struct fb_videomode *) geode_modedb;
*size = ARRAY_SIZE(geode_modedb);
@@ -334,7 +336,7 @@
}
-static int __init lxfb_map_video_memory(struct fb_info *info,
+static int __devinit lxfb_map_video_memory(struct fb_info *info,
struct pci_dev *dev)
{
struct lxfb_par *par = info->par;
@@ -412,7 +414,7 @@
.fb_imageblit = cfb_imageblit,
};
-static struct fb_info * __init lxfb_init_fbinfo(struct device *dev)
+static struct fb_info * __devinit lxfb_init_fbinfo(struct device *dev)
{
struct lxfb_par *par;
struct fb_info *info;
@@ -496,7 +498,7 @@
#define lxfb_resume NULL
#endif
-static int __init lxfb_probe(struct pci_dev *pdev,
+static int __devinit lxfb_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct lxfb_par *par;
@@ -588,7 +590,7 @@
return ret;
}
-static void lxfb_remove(struct pci_dev *pdev)
+static void __devexit lxfb_remove(struct pci_dev *pdev)
{
struct fb_info *info = pci_get_drvdata(pdev);
struct lxfb_par *par = info->par;
diff --git a/drivers/video/leo.c b/drivers/video/leo.c
index 3d78953..9e8bf7d 100644
--- a/drivers/video/leo.c
+++ b/drivers/video/leo.c
@@ -550,7 +550,7 @@
static int __devinit leo_probe(struct of_device *op,
const struct of_device_id *match)
{
- struct device_node *dp = op->node;
+ struct device_node *dp = op->dev.of_node;
struct fb_info *info;
struct leo_par *par;
int linebytes, err;
diff --git a/drivers/video/mb862xx/mb862xxfb.c b/drivers/video/mb862xx/mb862xxfb.c
index 0540de4..4e2b8cc 100644
--- a/drivers/video/mb862xx/mb862xxfb.c
+++ b/drivers/video/mb862xx/mb862xxfb.c
@@ -553,7 +553,7 @@
static int __devinit of_platform_mb862xx_probe(struct of_device *ofdev,
const struct of_device_id *id)
{
- struct device_node *np = ofdev->node;
+ struct device_node *np = ofdev->dev.of_node;
struct device *dev = &ofdev->dev;
struct mb862xxfb_par *par;
struct fb_info *info;
diff --git a/drivers/video/nuc900fb.c b/drivers/video/nuc900fb.c
index d4cde79..81687ed 100644
--- a/drivers/video/nuc900fb.c
+++ b/drivers/video/nuc900fb.c
@@ -596,8 +596,6 @@
goto release_regs;
}
- nuc900_driver_clksrc_div(&pdev->dev, "ext", 0x2);
-
fbi->clk = clk_get(&pdev->dev, NULL);
if (!fbi->clk || IS_ERR(fbi->clk)) {
printk(KERN_ERR "nuc900-lcd:failed to get lcd clock source\n");
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index 43ab7d8..7767338 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -572,22 +572,12 @@
/* PM code called only in internal controller mode */
static void omap_lcdc_suspend(void)
{
- if (lcdc.update_mode == OMAPFB_AUTO_UPDATE) {
- disable_controller();
- omap_stop_lcd_dma();
- }
+ omap_lcdc_set_update_mode(OMAPFB_UPDATE_DISABLED);
}
static void omap_lcdc_resume(void)
{
- if (lcdc.update_mode == OMAPFB_AUTO_UPDATE) {
- setup_regs();
- load_palette();
- setup_lcd_dma();
- set_load_mode(OMAP_LCDC_LOAD_FRAME);
- enable_irqs(OMAP_LCDC_IRQ_DONE);
- enable_controller();
- }
+ omap_lcdc_set_update_mode(OMAPFB_AUTO_UPDATE);
}
static void omap_lcdc_get_caps(int plane, struct omapfb_caps *caps)
diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c
index 1162603..eada9f1 100644
--- a/drivers/video/omap/rfbi.c
+++ b/drivers/video/omap/rfbi.c
@@ -26,6 +26,7 @@
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#include "omapfb.h"
#include "dispc.h"
@@ -83,13 +84,13 @@
static int rfbi_get_clocks(void)
{
- rfbi.dss_ick = clk_get(&dispc.fbdev->dssdev->dev, "ick");
+ rfbi.dss_ick = clk_get(&rfbi.fbdev->dssdev->dev, "ick");
if (IS_ERR(rfbi.dss_ick)) {
dev_err(rfbi.fbdev->dev, "can't get ick\n");
return PTR_ERR(rfbi.dss_ick);
}
- rfbi.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "dss1_fck");
+ rfbi.dss1_fck = clk_get(&rfbi.fbdev->dssdev->dev, "dss1_fck");
if (IS_ERR(rfbi.dss1_fck)) {
dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n");
clk_put(rfbi.dss_ick);
diff --git a/drivers/video/p9100.c b/drivers/video/p9100.c
index c85dd40..6552751 100644
--- a/drivers/video/p9100.c
+++ b/drivers/video/p9100.c
@@ -251,7 +251,7 @@
static int __devinit p9100_probe(struct of_device *op, const struct of_device_id *match)
{
- struct device_node *dp = op->node;
+ struct device_node *dp = op->dev.of_node;
struct fb_info *info;
struct p9100_par *par;
int linebytes, err;
diff --git a/drivers/video/s3fb.c b/drivers/video/s3fb.c
index d4471b4..dce8c97 100644
--- a/drivers/video/s3fb.c
+++ b/drivers/video/s3fb.c
@@ -71,7 +71,8 @@
"S3 Trio64UV+", "S3 Trio64V2/DX", "S3 Trio64V2/GX",
"S3 Plato/PX", "S3 Aurora64VP", "S3 Virge",
"S3 Virge/VX", "S3 Virge/DX", "S3 Virge/GX",
- "S3 Virge/GX2", "S3 Virge/GX2P", "S3 Virge/GX2P"};
+ "S3 Virge/GX2", "S3 Virge/GX2P", "S3 Virge/GX2P",
+ "S3 Trio3D/1X", "S3 Trio3D/2X", "S3 Trio3D/2X"};
#define CHIP_UNKNOWN 0x00
#define CHIP_732_TRIO32 0x01
@@ -89,10 +90,14 @@
#define CHIP_356_VIRGE_GX2 0x0D
#define CHIP_357_VIRGE_GX2P 0x0E
#define CHIP_359_VIRGE_GX2P 0x0F
+#define CHIP_360_TRIO3D_1X 0x10
+#define CHIP_362_TRIO3D_2X 0x11
+#define CHIP_368_TRIO3D_2X 0x12
#define CHIP_XXX_TRIO 0x80
#define CHIP_XXX_TRIO64V2_DXGX 0x81
#define CHIP_XXX_VIRGE_DXGX 0x82
+#define CHIP_36X_TRIO3D_1X_2X 0x83
#define CHIP_UNDECIDED_FLAG 0x80
#define CHIP_MASK 0xFF
@@ -324,6 +329,7 @@
static void s3_set_pixclock(struct fb_info *info, u32 pixclock)
{
+ struct s3fb_info *par = info->par;
u16 m, n, r;
u8 regval;
int rv;
@@ -339,7 +345,13 @@
vga_w(NULL, VGA_MIS_W, regval | VGA_MIS_ENB_PLL_LOAD);
/* Set S3 clock registers */
- vga_wseq(NULL, 0x12, ((n - 2) | (r << 5)));
+ if (par->chip == CHIP_360_TRIO3D_1X ||
+ par->chip == CHIP_362_TRIO3D_2X ||
+ par->chip == CHIP_368_TRIO3D_2X) {
+ vga_wseq(NULL, 0x12, (n - 2) | ((r & 3) << 6)); /* n and two bits of r */
+ vga_wseq(NULL, 0x29, r >> 2); /* remaining highest bit of r */
+ } else
+ vga_wseq(NULL, 0x12, (n - 2) | (r << 5));
vga_wseq(NULL, 0x13, m - 2);
udelay(1000);
@@ -456,7 +468,7 @@
static int s3fb_set_par(struct fb_info *info)
{
struct s3fb_info *par = info->par;
- u32 value, mode, hmul, offset_value, screen_size, multiplex;
+ u32 value, mode, hmul, offset_value, screen_size, multiplex, dbytes;
u32 bpp = info->var.bits_per_pixel;
if (bpp != 0) {
@@ -518,7 +530,7 @@
svga_wcrt_mask(0x33, 0x00, 0x08); /* no DDR ? */
svga_wcrt_mask(0x43, 0x00, 0x01); /* no DDR ? */
- svga_wcrt_mask(0x5D, 0x00, 0x28); // Clear strange HSlen bits
+ svga_wcrt_mask(0x5D, 0x00, 0x28); /* Clear strange HSlen bits */
/* svga_wcrt_mask(0x58, 0x03, 0x03); */
@@ -530,10 +542,14 @@
pr_debug("fb%d: offset register : %d\n", info->node, offset_value);
svga_wcrt_multi(s3_offset_regs, offset_value);
- vga_wcrt(NULL, 0x54, 0x18); /* M parameter */
- vga_wcrt(NULL, 0x60, 0xff); /* N parameter */
- vga_wcrt(NULL, 0x61, 0xff); /* L parameter */
- vga_wcrt(NULL, 0x62, 0xff); /* L parameter */
+ if (par->chip != CHIP_360_TRIO3D_1X &&
+ par->chip != CHIP_362_TRIO3D_2X &&
+ par->chip != CHIP_368_TRIO3D_2X) {
+ vga_wcrt(NULL, 0x54, 0x18); /* M parameter */
+ vga_wcrt(NULL, 0x60, 0xff); /* N parameter */
+ vga_wcrt(NULL, 0x61, 0xff); /* L parameter */
+ vga_wcrt(NULL, 0x62, 0xff); /* L parameter */
+ }
vga_wcrt(NULL, 0x3A, 0x35);
svga_wattr(0x33, 0x00);
@@ -570,6 +586,16 @@
vga_wcrt(NULL, 0x66, 0x90);
}
+ if (par->chip == CHIP_360_TRIO3D_1X ||
+ par->chip == CHIP_362_TRIO3D_2X ||
+ par->chip == CHIP_368_TRIO3D_2X) {
+ dbytes = info->var.xres * ((bpp+7)/8);
+ vga_wcrt(NULL, 0x91, (dbytes + 7) / 8);
+ vga_wcrt(NULL, 0x90, (((dbytes + 7) / 8) >> 8) | 0x80);
+
+ vga_wcrt(NULL, 0x66, 0x81);
+ }
+
svga_wcrt_mask(0x31, 0x00, 0x40);
multiplex = 0;
hmul = 1;
@@ -615,11 +641,13 @@
break;
case 3:
pr_debug("fb%d: 8 bit pseudocolor\n", info->node);
- if (info->var.pixclock > 20000) {
- svga_wcrt_mask(0x50, 0x00, 0x30);
+ svga_wcrt_mask(0x50, 0x00, 0x30);
+ if (info->var.pixclock > 20000 ||
+ par->chip == CHIP_360_TRIO3D_1X ||
+ par->chip == CHIP_362_TRIO3D_2X ||
+ par->chip == CHIP_368_TRIO3D_2X)
svga_wcrt_mask(0x67, 0x00, 0xF0);
- } else {
- svga_wcrt_mask(0x50, 0x00, 0x30);
+ else {
svga_wcrt_mask(0x67, 0x10, 0xF0);
multiplex = 1;
}
@@ -634,7 +662,10 @@
} else {
svga_wcrt_mask(0x50, 0x10, 0x30);
svga_wcrt_mask(0x67, 0x30, 0xF0);
- hmul = 2;
+ if (par->chip != CHIP_360_TRIO3D_1X &&
+ par->chip != CHIP_362_TRIO3D_2X &&
+ par->chip != CHIP_368_TRIO3D_2X)
+ hmul = 2;
}
break;
case 5:
@@ -647,7 +678,10 @@
} else {
svga_wcrt_mask(0x50, 0x10, 0x30);
svga_wcrt_mask(0x67, 0x50, 0xF0);
- hmul = 2;
+ if (par->chip != CHIP_360_TRIO3D_1X &&
+ par->chip != CHIP_362_TRIO3D_2X &&
+ par->chip != CHIP_368_TRIO3D_2X)
+ hmul = 2;
}
break;
case 6:
@@ -866,6 +900,17 @@
return CHIP_385_VIRGE_GX;
}
+ if (chip == CHIP_36X_TRIO3D_1X_2X) {
+ switch (vga_rcrt(NULL, 0x2f)) {
+ case 0x00:
+ return CHIP_360_TRIO3D_1X;
+ case 0x01:
+ return CHIP_362_TRIO3D_2X;
+ case 0x02:
+ return CHIP_368_TRIO3D_2X;
+ }
+ }
+
return CHIP_UNKNOWN;
}
@@ -930,17 +975,32 @@
vga_wcrt(NULL, 0x38, 0x48);
vga_wcrt(NULL, 0x39, 0xA5);
- /* Find how many physical memory there is on card */
- /* 0x36 register is accessible even if other registers are locked */
- regval = vga_rcrt(NULL, 0x36);
- info->screen_size = s3_memsizes[regval >> 5] << 10;
- info->fix.smem_len = info->screen_size;
-
+ /* Identify chip type */
par->chip = id->driver_data & CHIP_MASK;
par->rev = vga_rcrt(NULL, 0x2f);
if (par->chip & CHIP_UNDECIDED_FLAG)
par->chip = s3_identification(par->chip);
+ /* Find how many physical memory there is on card */
+ /* 0x36 register is accessible even if other registers are locked */
+ regval = vga_rcrt(NULL, 0x36);
+ if (par->chip == CHIP_360_TRIO3D_1X ||
+ par->chip == CHIP_362_TRIO3D_2X ||
+ par->chip == CHIP_368_TRIO3D_2X) {
+ switch ((regval & 0xE0) >> 5) {
+ case 0: /* 8MB -- only 4MB usable for display */
+ case 1: /* 4MB with 32-bit bus */
+ case 2: /* 4MB */
+ info->screen_size = 4 << 20;
+ break;
+ case 6: /* 2MB */
+ info->screen_size = 2 << 20;
+ break;
+ }
+ } else
+ info->screen_size = s3_memsizes[regval >> 5] << 10;
+ info->fix.smem_len = info->screen_size;
+
/* Find MCLK frequency */
regval = vga_rseq(NULL, 0x10);
par->mclk_freq = ((vga_rseq(NULL, 0x11) + 2) * 14318) / ((regval & 0x1F) + 2);
@@ -1131,6 +1191,7 @@
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A10), .driver_data = CHIP_356_VIRGE_GX2},
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A11), .driver_data = CHIP_357_VIRGE_GX2P},
{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A12), .driver_data = CHIP_359_VIRGE_GX2P},
+ {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A13), .driver_data = CHIP_36X_TRIO3D_1X_2X},
{0, 0, 0, 0, 0, 0, 0}
};
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index e8c7699..12c451a 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -991,13 +991,13 @@
priv->ch[j].lcdc = priv;
memcpy(&priv->ch[j].cfg, &pdata->ch[i], sizeof(pdata->ch[i]));
- error = sh_mobile_lcdc_check_interface(&priv->ch[i]);
+ error = sh_mobile_lcdc_check_interface(&priv->ch[j]);
if (error) {
dev_err(&pdev->dev, "unsupported interface type\n");
goto err1;
}
- init_waitqueue_head(&priv->ch[i].frame_end_wait);
- init_completion(&priv->ch[i].vsync_completion);
+ init_waitqueue_head(&priv->ch[j].frame_end_wait);
+ init_completion(&priv->ch[j].vsync_completion);
priv->ch[j].pan_offset = 0;
switch (pdata->ch[i].chan) {
diff --git a/drivers/video/tcx.c b/drivers/video/tcx.c
index ef7a7bd..cc039b3 100644
--- a/drivers/video/tcx.c
+++ b/drivers/video/tcx.c
@@ -365,7 +365,7 @@
static int __devinit tcx_probe(struct of_device *op,
const struct of_device_id *match)
{
- struct device_node *dp = op->node;
+ struct device_node *dp = op->dev.of_node;
struct fb_info *info;
struct tcx_par *par;
int linebytes, i, err;
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 2bc40e6..1082541 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -578,14 +578,9 @@
break;
case VIAFB_SET_GAMMA_LUT:
- viafb_gamma_table = kmalloc(256 * sizeof(u32), GFP_KERNEL);
- if (!viafb_gamma_table)
- return -ENOMEM;
- if (copy_from_user(viafb_gamma_table, argp,
- 256 * sizeof(u32))) {
- kfree(viafb_gamma_table);
- return -EFAULT;
- }
+ viafb_gamma_table = memdup_user(argp, 256 * sizeof(u32));
+ if (IS_ERR(viafb_gamma_table))
+ return PTR_ERR(viafb_gamma_table);
viafb_set_gamma_table(viafb_bpp, viafb_gamma_table);
kfree(viafb_gamma_table);
break;
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 95896f3..ef8d9d5 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -636,6 +636,9 @@
INIT_LIST_HEAD(&vp_dev->virtqueues);
spin_lock_init(&vp_dev->lock);
+ /* Disable MSI/MSIX to bring device to a known good state. */
+ pci_msi_off(pci_dev);
+
/* enable the device */
err = pci_enable_device(pci_dev);
if (err)
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 1ca8890..afe7e21 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -119,7 +119,7 @@
desc = kmalloc((out + in) * sizeof(struct vring_desc), gfp);
if (!desc)
- return vq->vring.num;
+ return -ENOMEM;
/* Transfer entries from the sg list into the indirect page */
for (i = 0; i < out; i++) {
diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c
index 1cddf92..750bc52 100644
--- a/drivers/watchdog/at32ap700x_wdt.c
+++ b/drivers/watchdog/at32ap700x_wdt.c
@@ -346,9 +346,13 @@
} else {
wdt->users = 0;
}
- wdt->miscdev.minor = WATCHDOG_MINOR;
- wdt->miscdev.name = "watchdog";
- wdt->miscdev.fops = &at32_wdt_fops;
+
+ wdt->miscdev.minor = WATCHDOG_MINOR;
+ wdt->miscdev.name = "watchdog";
+ wdt->miscdev.fops = &at32_wdt_fops;
+ wdt->miscdev.parent = &pdev->dev;
+
+ platform_set_drvdata(pdev, wdt);
if (at32_wdt_settimeout(timeout)) {
at32_wdt_settimeout(TIMEOUT_DEFAULT);
@@ -360,17 +364,17 @@
ret = misc_register(&wdt->miscdev);
if (ret) {
dev_dbg(&pdev->dev, "failed to register wdt miscdev\n");
- goto err_iounmap;
+ goto err_register;
}
- platform_set_drvdata(pdev, wdt);
- wdt->miscdev.parent = &pdev->dev;
dev_info(&pdev->dev,
"AT32AP700X WDT at 0x%p, timeout %d sec (nowayout=%d)\n",
wdt->regs, wdt->timeout, nowayout);
return 0;
+err_register:
+ platform_set_drvdata(pdev, NULL);
err_iounmap:
iounmap(wdt->regs);
err_free:
diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c
index ca0f4c6..1df284f 100644
--- a/drivers/watchdog/gef_wdt.c
+++ b/drivers/watchdog/gef_wdt.c
@@ -273,7 +273,7 @@
bus_clk = freq;
/* Map devices registers into memory */
- gef_wdt_regs = of_iomap(dev->node, 0);
+ gef_wdt_regs = of_iomap(dev->dev.of_node, 0);
if (gef_wdt_regs == NULL)
return -ENOMEM;
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index ea25885..2ee7dac 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -330,7 +330,6 @@
}
static struct platform_driver imx2_wdt_driver = {
- .probe = imx2_wdt_probe,
.remove = __exit_p(imx2_wdt_remove),
.shutdown = imx2_wdt_shutdown,
.driver = {
diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c
index 6622335..4cda64d 100644
--- a/drivers/watchdog/mpc8xxx_wdt.c
+++ b/drivers/watchdog/mpc8xxx_wdt.c
@@ -189,7 +189,7 @@
const struct of_device_id *match)
{
int ret;
- struct device_node *np = ofdev->node;
+ struct device_node *np = ofdev->dev.of_node;
struct mpc8xxx_wdt_type *wdt_type = match->data;
u32 freq = fsl_get_sys_freq();
bool enabled;
diff --git a/drivers/watchdog/rdc321x_wdt.c b/drivers/watchdog/rdc321x_wdt.c
index 69c6adb..428f8a1 100644
--- a/drivers/watchdog/rdc321x_wdt.c
+++ b/drivers/watchdog/rdc321x_wdt.c
@@ -1,7 +1,7 @@
/*
* RDC321x watchdog driver
*
- * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2007-2010 Florian Fainelli <florian@openwrt.org>
*
* This driver is highly inspired from the cpu5_wdt driver
*
@@ -36,8 +36,7 @@
#include <linux/watchdog.h>
#include <linux/io.h>
#include <linux/uaccess.h>
-
-#include <asm/rdc321x_defs.h>
+#include <linux/mfd/rdc321x.h>
#define RDC_WDT_MASK 0x80000000 /* Mask */
#define RDC_WDT_EN 0x00800000 /* Enable bit */
@@ -63,6 +62,8 @@
int default_ticks;
unsigned long inuse;
spinlock_t lock;
+ struct pci_dev *sb_pdev;
+ int base_reg;
} rdc321x_wdt_device;
/* generic helper functions */
@@ -70,14 +71,18 @@
static void rdc321x_wdt_trigger(unsigned long unused)
{
unsigned long flags;
+ u32 val;
if (rdc321x_wdt_device.running)
ticks--;
/* keep watchdog alive */
spin_lock_irqsave(&rdc321x_wdt_device.lock, flags);
- outl(RDC_WDT_EN | inl(RDC3210_CFGREG_DATA),
- RDC3210_CFGREG_DATA);
+ pci_read_config_dword(rdc321x_wdt_device.sb_pdev,
+ rdc321x_wdt_device.base_reg, &val);
+ val |= RDC_WDT_EN;
+ pci_write_config_dword(rdc321x_wdt_device.sb_pdev,
+ rdc321x_wdt_device.base_reg, val);
spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags);
/* requeue?? */
@@ -105,10 +110,13 @@
/* Clear the timer */
spin_lock_irqsave(&rdc321x_wdt_device.lock, flags);
- outl(RDC_CLS_TMR, RDC3210_CFGREG_ADDR);
+ pci_write_config_dword(rdc321x_wdt_device.sb_pdev,
+ rdc321x_wdt_device.base_reg, RDC_CLS_TMR);
/* Enable watchdog and set the timeout to 81.92 us */
- outl(RDC_WDT_EN | RDC_WDT_CNT, RDC3210_CFGREG_DATA);
+ pci_write_config_dword(rdc321x_wdt_device.sb_pdev,
+ rdc321x_wdt_device.base_reg,
+ RDC_WDT_EN | RDC_WDT_CNT);
spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags);
mod_timer(&rdc321x_wdt_device.timer,
@@ -148,7 +156,7 @@
unsigned long arg)
{
void __user *argp = (void __user *)arg;
- unsigned int value;
+ u32 value;
static const struct watchdog_info ident = {
.options = WDIOF_CARDRESET,
.identity = "RDC321x WDT",
@@ -162,9 +170,10 @@
case WDIOC_GETSTATUS:
/* Read the value from the DATA register */
spin_lock_irqsave(&rdc321x_wdt_device.lock, flags);
- value = inl(RDC3210_CFGREG_DATA);
+ pci_read_config_dword(rdc321x_wdt_device.sb_pdev,
+ rdc321x_wdt_device.base_reg, &value);
spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags);
- if (copy_to_user(argp, &value, sizeof(int)))
+ if (copy_to_user(argp, &value, sizeof(u32)))
return -EFAULT;
break;
case WDIOC_GETSUPPORT:
@@ -219,17 +228,35 @@
static int __devinit rdc321x_wdt_probe(struct platform_device *pdev)
{
int err;
+ struct resource *r;
+ struct rdc321x_wdt_pdata *pdata;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data supplied\n");
+ return -ENODEV;
+ }
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_IO, "wdt-reg");
+ if (!r) {
+ dev_err(&pdev->dev, "failed to get wdt-reg resource\n");
+ return -ENODEV;
+ }
+
+ rdc321x_wdt_device.sb_pdev = pdata->sb_pdev;
+ rdc321x_wdt_device.base_reg = r->start;
err = misc_register(&rdc321x_wdt_misc);
if (err < 0) {
- printk(KERN_ERR PFX "watchdog misc_register failed\n");
+ dev_err(&pdev->dev, "misc_register failed\n");
return err;
}
spin_lock_init(&rdc321x_wdt_device.lock);
/* Reset the watchdog */
- outl(RDC_WDT_RST, RDC3210_CFGREG_DATA);
+ pci_write_config_dword(rdc321x_wdt_device.sb_pdev,
+ rdc321x_wdt_device.base_reg, RDC_WDT_RST);
init_completion(&rdc321x_wdt_device.stop);
rdc321x_wdt_device.queue = 0;
@@ -240,7 +267,7 @@
rdc321x_wdt_device.default_ticks = ticks;
- printk(KERN_INFO PFX "watchdog init success\n");
+ dev_info(&pdev->dev, "watchdog init success\n");
return 0;
}
diff --git a/drivers/watchdog/wm8350_wdt.c b/drivers/watchdog/wm8350_wdt.c
index 89dd7b0..b68d928 100644
--- a/drivers/watchdog/wm8350_wdt.c
+++ b/drivers/watchdog/wm8350_wdt.c
@@ -284,7 +284,7 @@
struct wm8350 *wm8350 = platform_get_drvdata(pdev);
if (!wm8350) {
- dev_err(wm8350->dev, "No driver data supplied\n");
+ pr_err("No driver data supplied\n");
return -ENODEV;
}
diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
index eab33f1..7b547f5 100644
--- a/drivers/xen/xenbus/xenbus_xs.c
+++ b/drivers/xen/xenbus/xenbus_xs.c
@@ -499,7 +499,7 @@
#define PRINTF_BUFFER_SIZE 4096
char *printf_buffer;
- printf_buffer = kmalloc(PRINTF_BUFFER_SIZE, GFP_KERNEL);
+ printf_buffer = kmalloc(PRINTF_BUFFER_SIZE, GFP_NOIO | __GFP_HIGH);
if (printf_buffer == NULL)
return -ENOMEM;
diff --git a/firmware/Makefile b/firmware/Makefile
index 243409f..020e629 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -83,6 +83,7 @@
fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
qlogic/12160.bin
fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
+fw-shipped-$(CONFIG_INFINIBAND_QIB) += qlogic/sd7220.fw
fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
diff --git a/firmware/WHENCE b/firmware/WHENCE
index e8e550f..ae5f8a4 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -858,3 +858,43 @@
Found in hex form in kernel source.
--------------------------------------------------------------------------
+
+Driver: ib_qib - QLogic Infiniband
+
+File: qlogic/sd7220.fw
+
+Licence:
+
+ * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+
+Found in hex form in kernel source.
+
+--------------------------------------------------------------------------
diff --git a/firmware/qlogic/sd7220.fw.ihex b/firmware/qlogic/sd7220.fw.ihex
new file mode 100644
index 0000000..a336363
--- /dev/null
+++ b/firmware/qlogic/sd7220.fw.ihex
@@ -0,0 +1,513 @@
+:10000000020A29020A87E5E630E6047F0180027FC2
+:1000100000E5E230E4047E0180027E00EE5F6008CD
+:1000200053F9F7E4F5FE80087F0A121731120EA289
+:1000300075FC08E4F5FDE5E720E70343F908220035
+:1000400001201100042000755101E4F552F553F52B
+:1000500052F57E7F04020438C2360552E552D3942D
+:100060000C4005755201D23690070C7407F0A3744A
+:10007000FFF0E4F50CA3F0900714F0A3F0750B204B
+:10008000F509E4F508E508D39430400302040412AE
+:100090000006150BE50870047F0180027F00E5096A
+:1000A00070047E0180027E00EE5F6005121871D23E
+:1000B0003553E1F7E5084509FFE50B25E025E02488
+:1000C00083F582E43407F583EFF085E220E552D32F
+:1000D0009401400D1219F3E054A064407003020330
+:1000E000FB53F9F8909470E4F0E0F510AF09121E9C
+:1000F000B3AF08EF4408F582758380E0F529EF443B
+:1001000007121A3CF5225440D39400401EE52954AE
+:10011000F070211219F3E04480F0E52254306508B4
+:1001200070091219F3E054BFF080091219F37440FA
+:10013000F00203FB121A127583AE74FFF0AF087E53
+:1001400000EF4407F582E0FDE50B25E025E0248182
+:10015000F582E43407F583EDF090070EE004F0EF4C
+:100160004407F582758398E0F528121A23400C1293
+:1001700019F3E04401121A320203F6AF087E00744C
+:1001800080CDEFCD8D82F583E030E00A1219F3E0E7
+:100190004420F00203FB1219F3E054DFF0EE44AE0A
+:1001A000121A4330E4030203FB749E121A0520E086
+:1001B000030203FB8F828E83E020E0030203FB1225
+:1001C00019F3E04410F0E5E320E708E508121A3AD5
+:1001D0004404F0AF087E00EF121A3A20E2341219FC
+:1001E000F3E04408F0E5E430E6047D0180027D00A0
+:1001F000E57EC3940450047C0180027C00EC4D60D9
+:1002000005C2350203FBEE44D2121A434440F00209
+:1002100003FB1219F3E054F7F0121A127583D2E0BF
+:1002200054BFF0900714E004F0E57E7003757E0182
+:10023000AF087E00121A2340121219F3E044011293
+:1002400019F2E05402121A320203FB1219F3E044CD
+:10025000021219F2E054FEF0C235EE448A8F82F5A4
+:1002600083E0F517548F4440F07490FCE508440790
+:10027000FDF5828C83E0543F900702F0E054C08D7E
+:10028000828C83F07492121A05900703121A197463
+:1002900082121A05900704121A1974B4121A0590E2
+:1002A0000705121A197494FEE5084406121A0AF595
+:1002B0001030E004D2378002C237E510547F8F82BD
+:1002C0008E83F0304430121A035480D394004004DB
+:1002D000D2398002C2398F828E83E04480F0121AB4
+:1002E000035440D394004004D23A8002C23A8F8231
+:1002F0008E83E04440F07492FEE5084406121A0A28
+:1003000030E704D2388002C2388F828E83E0547F77
+:10031000F0121E46E4F50A20030280033043031264
+:1003200019952002028003304203120C8F303006F0
+:10033000121995120C8F120D471219F3E054FBF0AD
+:10034000E50AC39401404643E1081219F3E044046E
+:10035000F0E5E420E72A121A127583D2E05408D39C
+:10036000940040047F0180027F00E50AC3940140AD
+:10037000047E0180027E00EF5E6005121DD78017AB
+:10038000121A127583D2E04408F00203FB121A120B
+:100390007583D2E054F7F0121E467F0812173174AD
+:1003A0008EFE121A128E83E0F51054FEF0E5104412
+:1003B00001FFE508FDED4407F582EFF0E51054FE7E
+:1003C000FFED4407F582EF121A11758386E04410A1
+:1003D000121A11E04410F01219F3E054FD4401FF29
+:1003E0001219F3EF121A3230320CE5084408F58284
+:1003F0007583827405F0AF0B1218D774102508F5B9
+:10040000080200850509E509D3940750030200821C
+:10041000E57ED3940040047F0180027F00E57EC327
+:1004200094FA50047E0180027E00EE5F6002057E39
+:1004300030350B43E1017F0912173102005853E1B7
+:10044000FE0200588E6A8F6B8C6C8D6D756E017517
+:100450006F01757001E4F573F574F57590072FF071
+:10046000F53CF53EF546F547F53DF53FF56FE56F93
+:10047000700FE56B456A12072A758380743AF08025
+:100480000912072A758380741AF0E4F56EC3743F6D
+:10049000956EFF120865758382EFF0121A4D1208EF
+:1004A000C6E533F01208FA1208B140E1E56F700BAF
+:1004B00012072A7583807436F0800912072A758323
+:1004C000807416F0756E0112072A7583B4E56EF01C
+:1004D000121A4D743F256EF582E43400F583E5333E
+:1004E000F074BF256EF582E434001208B140D8E400
+:1004F000F570F546F547F56E1208FAF583E0FE1241
+:1005000008C6E07C002400FFEC3EFEAD3BD3EF9D2F
+:10051000EE9C50047B0180027B00E57070047A0140
+:1005200080027A00EB5A6006856E46757001D3EF43
+:100530009DEE9C50047F0180027F00E570B40104B1
+:100540007E0180027E00EF5E6003856E47056EE5EA
+:100550006E647F70A3E5466005E547B47E0385467B
+:1005600047E56F7008854676854777800EC3747FB0
+:100570009546F578C3747F9547F579E56F7037E553
+:10058000466547700C757301757401F53CF53D8047
+:1005900035E4F54EC3E5479546F53CC313F57125A3
+:1005A00046F572C3943F4005E4F53D8040C3743F77
+:1005B0009572F53D8037E5466547700F7573017597
+:1005C0007501F53EF53F754E018022E4F54EC3E519
+:1005D000479546F53EC313F5712546F572D3943F12
+:1005E0005005E4F53F8006E57224C1F53F056FE54F
+:1005F0006FC39402500302046EE56D456C70028077
+:1006000004E574457590072FF07F01E53E6004E531
+:100610003C7014E4F53CF53DF53EF53F1208D27010
+:1006200004F00206A4807AE53CC3953E4007E53C11
+:10063000953EFF8006C3E53E953CFFE576D3957970
+:10064000400585767A800385797AE577C395785079
+:100650000585777B800385787BE57BD3957A403071
+:10066000E57B957AF53CF53EC3E57B957A900719D5
+:10067000F0E53CC313F571257AF572C3943F40054C
+:10068000E4F53D801FC3743F9572F53DF53F80143E
+:10069000E4F53CF53E900719F01208D27003F080A3
+:1006A000037401F01208657583D0E0540FFEAD3C71
+:1006B00070027E07BE0F027E80EEFBEFD39B74803C
+:1006C000F898401FE4F53CF53E1208D27003F08024
+:1006D000127401F0E508FBEB4407F5827583D2E064
+:1006E0004410F0E508FBEB4409F58275839EEDF0BC
+:1006F000EB4407F5827583CAEDF01208657583CC6B
+:10070000EFF022E5084407F5827583BCE054F0F071
+:10071000E5084407F5827583BEE054F0F0E508442F
+:1007200007F5827583C0E054F0F0E5084407F582D0
+:1007300022F0900728E0FEA3E0F5828E8322854216
+:100740004285414185404074C02FF58274023EF5D8
+:1007500083E542F074E02FF58274023EF58322E5D2
+:100760004229FDE433FCE53CC39DEC6480F87480D1
+:100770009822F583E0900722541FFDE0FAA3E0F5EC
+:10078000828A83EDF022900722E0FCA3E0F5828CC0
+:100790008322900724FFED4407CFF0A3EFF02285DA
+:1007A0003838853939853A3A74C02FF58274023E5B
+:1007B000F58322900726FFED4407CFF0A3EFF02248
+:1007C000F074A02FF58274023EF5832274C02511C7
+:1007D000F582E43401F5832274002511F582E434B6
+:1007E00002F5832274602511F582E43403F5832237
+:1007F00074802511F582E43403F5832274E0251119
+:10080000F582E43403F5832274402511F582E43443
+:1008100006F5832274802FF58274023EF58322AFA1
+:10082000087E00EF4407F58222F583E5824407F550
+:1008300082E540F02274402511F582E43402F5830C
+:100840002274C02511F582E43403F5832274002557
+:1008500011F582E43406F5832274202511F582E433
+:100860003406F58322E508FDED4407F58222E541D3
+:10087000F0E56564014564227E00FB7A00FD7C00A2
+:100880002274202511F582E434022274A02511F58A
+:1008900082E4340322853E42853F418F4022853CDD
+:1008A00042853D418F402275453F900720E4F0A3EB
+:1008B00022F583E532F0056EE56EC3944022F0E543
+:1008C000084406F582227400256EF582E43400F5B2
+:1008D0008322E56D456C90072F22E4F9E53CD39522
+:1008E0003E2274802EF582E43402F583E02274A067
+:1008F0002EF582E43402F583E0227480256EF582C1
+:10090000E43400222542FDE433FC22854242854145
+:100910004185404022ED4C60030209E5EF4E7037FF
+:10092000900726120789E0FD1207CCEDF09007280A
+:10093000120789E0FD1207D8EDF0120786E0541F78
+:10094000FD120881F583EDF0900724120789E05429
+:100950001FFD120835EDF0EF64044E703790072646
+:10096000120789E0FD1207E4EDF0900728120789CD
+:10097000E0FD1207F0EDF0120786E0541FFD1208AB
+:100980008BF583EDF0900724120789E0541FFD12C8
+:100990000841EDF0EF64014E70047D0180027D009E
+:1009A000EF64024E70047F0180027F00EF4D60789B
+:1009B000900726120735E0FF1207FCEF120731E01F
+:1009C000FF120808EFF0900722120735E0541FFFCE
+:1009D00012084DEFF0900724120735E0541FFF1264
+:1009E0000859EFF0221207CCE4F01207D8E4F01215
+:1009F0000881F583E4F01208357414F01207E4E47A
+:100A0000F01207F0E4F012088BF583E4F0120841CD
+:100A10007414F01207FCE4F0120808E4F012084D18
+:100A2000E4F01208597414F02253F9F775FC10E43D
+:100A3000F5FD75FE30F5FFE5E720E70343F908E52E
+:100A4000E620E70B78FFE4F6D8FD53E6FE80097850
+:100A500008E4F6D8FD53E6FE758180E4F5A8D2A837
+:100A6000C2A9D2AFE5E220E50520E602800343E11A
+:100A700002E5E220E00E9000007F007E08E4F0A393
+:100A8000DFFCDEFA020ADB43FA01C0E0C0F0C083FB
+:100A9000C082C0D0121CE7D0D0D082D083D0F0D09A
+:100AA000E053FAFE32021B55E493A3F8E493A3F655
+:100AB00008DFF98029E493A3F85407240CC8C33352
+:100AC000C4540F4420C8834004F456800146F6DF26
+:100AD000E4800B010204081020408090003FE47E77
+:100AE000019360C1A3FF543F30E509541FFEE49316
+:100AF000A360010ECF54C025E060AD40B880FE8CED
+:100B0000648D658A668B67E4F569EF4E7003021D9C
+:100B100055E4F568E5674566703212072A758390DB
+:100B2000E41207297583C2E41207297583C4E4120D
+:100B30000870702912072A758392E41207297583B9
+:100B4000C6E41207297583C8E4F0801190072612C5
+:100B50000735E41208707005120732E4F0121D55D3
+:100B6000121EBFE5674566703312072A758390E54C
+:100B7000411207297583C2E5411207297583C41202
+:100B8000086E702912072A758392E54012072975AD
+:100B900083C6E5401207297583C8800E9007261288
+:100BA000073512086E7006120732E540F0AF697E15
+:100BB00000AD67AC6612044412072A7583CAE0D3FD
+:100BC0009400500C0568E568C394055003020B14AB
+:100BD000228C608D611208DA7420400D2FF582742A
+:100BE000033EF583E53EF0800B2FF58274033EF55E
+:100BF00083E53CF0E53CD3953E403CE561456070C3
+:100C000010E9120904E53E120768403B120895807E
+:100C100018E53EC39538401D853E38E53E600585A4
+:100C20003F3980038539398F3A120814E53E12079F
+:100C3000C0E53FF0228043E5614560701912075F0F
+:100C4000400512089E802712090B120814E5421273
+:100C500007C0E541F022E53CC39538401D853C388E
+:100C6000E53C6005853D3980038539398F3A1208A6
+:100C700014E53C1207C0E53DF02285383885393946
+:100C8000853A3A120814E5381207C0E539F0227F98
+:100C900006121731121D23120E04120E33E0440AFD
+:100CA000F0748EFE120E04120E0BEFF0E52830E504
+:100CB00003D38001C3400575142080037514081206
+:100CC0000E0475838AE514F0B4FF05751280800662
+:100CD000E514C313F512E4F516F57F121936121355
+:100CE000A3E50AC3940150090516E516C394144000
+:100CF000EAE5E420E728120E047583D2E05408D315
+:100D0000940040047F0180027F00E50AC394014003
+:100D1000047E0180027E00EF5E6003121DD7E57F36
+:100D2000C394114014120E047583D2E04480F0E5A0
+:100D3000E420E70F121DD7800A120E047583D2E05B
+:100D4000547FF0121D2322748A850882F583E517EB
+:100D5000F0120E3AE4F0900702E0120E177583903D
+:100D6000EFF07492FEE5084407FFF5828E83E054AD
+:100D7000C0FD900703E0543F4D8F828E83F09007B3
+:100D800004E0120E17758382EFF0900705E0FFED87
+:100D90004407F5827583B4EF120E03758380E05427
+:100DA000BFF030370A120E91758394E04480F03022
+:100DB000380A120E91758392E04480F0E52830E401
+:100DC0001A20390A120E04758388E0547FF0203A05
+:100DD0000A120E04758388E054BFF0748CFE120E64
+:100DE000048E83E0540F120E03758386E054BFF027
+:100DF000E5084406120DFD75838AE4F022F582753C
+:100E00008382E4F0E5084407F582228E83E0F51042
+:100E100054FEF0E5104401FFE508FDED4407F582BE
+:100E200022E515C45407FFE508FDED4408F5827579
+:100E3000838222758380E04440F0E5084408F5820F
+:100E400075838A22E51625E025E024AFF582E43497
+:100E50001AF583E493F50D2243E11043E18053E159
+:100E6000FD85E11022E51625E025E024B2F582E4B7
+:100E7000341AF583E49322855582855483E515F071
+:100E800022E5E25420D3940022E5E25440D39400BA
+:100E900022E5084406F58222FDE508FBEB4407F550
+:100EA000822253F9F775FE3022EF4E70261207CCDE
+:100EB000E0FD90072612077B1207D8E0FD90072877
+:100EC00012077B120881120772120835E09007247E
+:100ED000120778EF64044E70291207E4E0FD9007D2
+:100EE0002612077B1207F0E0FD90072812077B12FD
+:100EF000088B120772120841E0541FFD900724125C
+:100F0000077BEF64014E70047D0180027D00EF6479
+:100F1000024E70047F0180027F00EF4D60351207A2
+:100F2000FCE0FF900726120789EFF0120808E0FFA7
+:100F3000900728120789EFF012084DE0541FFF12A6
+:100F40000786EFF0120859E0541FFF90072412079C
+:100F500089EFF022E4F553120E8140047F018002F4
+:100F60007F00120E8940047E0180027E00EE4F70E9
+:100F700003020FF685E11043E10253E10F85E11012
+:100F8000E4F551E5E3543FF552120E89401DAD5290
+:100F9000AF51121118EF600885E11043E140800B5A
+:100FA00053E1BF120E5812000680FBE5E3543FF5F3
+:100FB00051E5E4543FF552120E81401DAD52AF5140
+:100FC000121118EF600885E11043E120800B53E116
+:100FD000DF120E5812000680FB120E8140047F01C2
+:100FE00080027F00120E8940047E0180027E00EEA6
+:100FF0004F6003120E5B22120E21EFF012109122AD
+:1010000002110002104002109000000000000000D9
+:1010100001200120E4F5571216BD121644E4121007
+:10102000561214B7900726120735E4120731E4F080
+:101030001210561214B7900726120735E541120711
+:1010400031E540F0AF577E00AD567C00120444AF4E
+:10105000567E000211EEFF900720A3E0FDE4F55656
+:10106000F540FEFCAB56FA1211517F0F7D18E4F5E6
+:1010700056F540FEFCAB56FA121541AF567E0012F3
+:101080001AFFE4FFF5567D1FF540FEFCAB56FA2231
+:1010900022E4F555E508FD74A0F556ED4407F55733
+:1010A000E52830E503D38001C340057F28EF8004A5
+:1010B0007F14EFC313F554E4F9120E1875838EE014
+:1010C000F510CEEFCEEED394004026E51054FE127C
+:1010D0000E9875838EEDF0E5104401FDEB4407F5A5
+:1010E00082EDF0855782855683E030E301091E804A
+:1010F000D4C234E9C395544002D2342202000622FD
+:10110000303011901000E493F510901010E493F536
+:101110001012109012115022E4FCC3ED9FFAEFF56B
+:101120008375820079FFE493CC6CCCA3D9F8DAF60E
+:10113000E5E230E4028CE5ED24FFFFEF7582FFF578
+:1011400083E4936C70037F01227F00222211000050
+:10115000228E588F598C5A8D5B8A5C8B5D755E012F
+:10116000E4F55FF560F56212072A7583D0E0FFC4ED
+:10117000540FF561121EA585595ED3E55E955BE5BA
+:101180005A12076B504B1207037583BCE0455E1281
+:1011900007297583BEE0455E1207297583C0E045C7
+:1011A0005EF0AF5FE560120878120AFFAF627E0062
+:1011B000AD5DAC5C120444E561AF5E7E00B4030536
+:1011C000121E218007AD5DAC5C121317055E021183
+:1011D0007A1207037583BCE045401207297583BE68
+:1011E000E045401207297583C0E04540F0228E5843
+:1011F0008F59755A017901755B01E4FB12072A7555
+:1012000083AEE0541AFF120865E0C4135407FEEFE2
+:10121000700CEE6535700790072FE0B4010DAF3507
+:101220007E00120EA9CFEBCF021E60E55964024585
+:101230005870047F0180027F00E559455870047E94
+:101240000180027E00EE4F602385414985404BE5D9
+:10125000594558702CAF5AFECDE9CDFCAB59AA5870
+:10126000120AFFAF5B7E00121E608015AF5B7E002E
+:10127000121E60900726120735E549120731E54B2B
+:10128000F0E4FDAF35FEFC120915228C648D651269
+:1012900008DA403CE56545647010120904C3E53E78
+:1012A000120769403B1208958018E53EC395384007
+:1012B0001D853E38E53E6005853F39800385393917
+:1012C0008F3A1207A8E53E120753E53FF022803B14
+:1012D000E5654564701112075F400512089E801F86
+:1012E00012073EE541F022E53CC39538401D853CA0
+:1012F00038E53C6005853D3980038539398F3A12E0
+:1013000007A8E53C120753E53DF02212079FE53898
+:10131000120753E539F0228C638D641208DA403CE1
+:10132000E56445637010120904C3E53E1207694085
+:101330003B1208958018E53EC39538401D853E3820
+:10134000E53E6005853F3980038539398F3A1207BC
+:10135000A8E53E120753E53FF022803BE564456374
+:10136000701112075F400512089E801F12073EE5AC
+:1013700041F022E53CC39538401D853C38E53C6092
+:1013800005853D3980038539398F3A1207A8E53C38
+:10139000120753E53DF02212079FE538120753E587
+:1013A00039F022E50DFEE5088E544405F555751516
+:1013B0000FF582120E7A1217A320310575150380DE
+:1013C0000375150BE50AC39401503812142020311F
+:1013D0000605150515800415151515E50AC39401B4
+:1013E0005021121420203104051580021515E50A3C
+:1013F000C39401500E120E771217A3203105051564
+:10140000120E77E515B408047F0180027F00E51510
+:10141000B407047E0180027E00EE4F6002057F2249
+:10142000855582855483E515F01217A32212072AE9
+:101430007583AE74FF120729E0541AF534E0C41323
+:101440005407F53524FE602424FE603C24047063B8
+:1014500075312DE508FD74B612079274BC90072211
+:1014600012079574901207B37492803C75313AE577
+:1014700008FD74BA12079274C09007221207B6745E
+:10148000C41207B374C88020753135E508FD74B8FF
+:1014900012079274BEFFED4407900722CFF0A3EF2E
+:1014A000F074C21207B374C6FFED4407A3CFF0A3D4
+:1014B000EFF022753401228E588F598C5A8D5B8A39
+:1014C0005C8B5D755E01E4F55F121EA585595ED3E8
+:1014D000E55E955BE55A12076B5057E55D455C701C
+:1014E0003012072A758392E55E1207297583C6E5D7
+:1014F0005E1207297583C8E55E120729758390E59A
+:101500005E1207297583C2E55E1207297583C480C0
+:1015100003120732E55EF0AF5F7E00AD5DAC5C129A
+:101520000444AF5E7E00AD5DAC5C120BD1055E0283
+:1015300014CFAB5DAA5CAD5BAC5AAF59AE58021B81
+:10154000FB8C5C8D5D8A5E8B5F756001E4F561F5F7
+:1015500062F563121EA58F60D3E560955DE55C12B0
+:10156000076B5061E55F455E702712072A7583B6E9
+:10157000E5601207297583B8E5601207297583BAFB
+:10158000E560F0AF617E00E56212087A120AFF8022
+:1015900019900724120735E56012072975838EE438
+:1015A0001207297401120729E4F0AF637E00AD5FD2
+:1015B000AC5E120444AF607E00AD5FAC5E12128B75
+:1015C00005600215582290114DE49390072EF012F9
+:1015D000081F7583AEE0541AF5347067EF4407F5C1
+:1015E000827583CEE0FF1313135407F536540FD3DF
+:1015F0009400400612142D121BA9E536540F24FE48
+:10160000600C14600C146019240370378010021EE3
+:1016100091121E9112072A7583CEE054EFF0021D3D
+:10162000AE121014E4F555121D850555E555C39409
+:101630000540F412072A7583CEE054C7120729E04B
+:101640004408F022E4F558F559AF08EF4407F58255
+:101650007583D0E0FDC4540FF55AEF4407F5827549
+:1016600083807401F0120821758382E545F0EF4410
+:1016700007F58275838A74FFF0121A4D12072A75D6
+:1016800083BCE054EF1207297583BEE054EF1207C4
+:10169000297583C0E054EF1207297583BCE044101C
+:1016A0001207297583BEE044101207297583C0E034
+:1016B0004410F0AF58E559120878020AFFE4F558D3
+:1016C0007D01F559AF35FEFC12091512072A758305
+:1016D000B674101207297583B87410120729758320
+:1016E000BA74101207297583BC7410120729758308
+:1016F000BE74101207297583C074101207297583F0
+:1017000090E41207297583C2E41207297583C4E4A3
+:10171000120729758392E41207297583C6E412071C
+:10172000297583C8E4F0AF58FEE55912087A020A19
+:10173000FFE5E230E46CE5E754C064407064E5091D
+:10174000C45430FEE50825E025E054C04EFEEF54B9
+:101750003F4EFDE52BAE2A7802C333CE33CED8F907
+:10176000F5828E83EDF0E52BAE2A7802C333CE33BB
+:10177000CED8F9FFF5828E83A3E5FEF08F828E83AB
+:10178000A3A3E5FDF08F828E83A3A3A3E5FCF0C3A2
+:10179000E52B94FAE52A94005008052BE52B7002FE
+:1017A000052A22E4FFE4F558F556F5577482FC1239
+:1017B0000E048C83E0F510547FF0E5104480120E87
+:1017C00098EDF07E0A120E047583A0E020E026DE7C
+:1017D000F40557E55770020556E5142401FDE4337E
+:1017E000FCD3E5579DE5569C40D9E50A942050026C
+:1017F000050A43E108C231120E047583A6E05512B2
+:1018000065127003D23122C23122900726E0FAA37A
+:10181000E0F5828A83E0F541E539C395414026E54C
+:10182000399541C39FEE12076B40047C0180027C16
+:1018300000E541643F60047B0180027B00EC5B605B
+:101840002905418028C3E5419539C39FEE12076BF6
+:1018500040047F0180027F00E54160047E01800238
+:101860007E00EF5E600415418003853941853A4072
+:1018700022E5E230E460E5E130E25BE50970047FF7
+:101880000180027F00E50870047E0180027E00EE88
+:101890005F604353F9F8E5E230E43BE5E130E22EE6
+:1018A00043FA0253FAFBE4F510909470E510F0E56A
+:1018B000E130E2E7909470E06510600343FA0405BC
+:1018C00010909470E510F070E612000680E153FA73
+:1018D000FD53FAFB80C0228F54120006E5E130E090
+:1018E000047F0180027F00E57ED3940540047E01E1
+:1018F00080027E00EE4F603D855411E5E220E1322A
+:1019000074CE121A0530E7047D0180027D008F82BB
+:101910008E83E030E6047F0180027F00EF5D70156A
+:101920001215C674CE121A0530E607E04480F04363
+:10193000F98012187122120E44E51625E025E024E4
+:10194000B0F582E4341AF583E493F50FE51625E04B
+:1019500025E024B1F582E4341AF583E493F50E1200
+:101960000E65F510E50F54F0120E1775838CEFF02D
+:10197000E50F30E00C120E04758386E04440F080E1
+:101980000A120E04758386E054BFF0120E9175831F
+:1019900082E50EF0227F05121731120E04120E336B
+:1019A0007402F0748EFE120E04120E0BEFF0751519
+:1019B00070120FF72034057515108003751550123D
+:1019C0000FF72034047410800274F02515F51512F9
+:1019D0000E21EFF0121091203417E5156430600CE1
+:1019E00074102515F515B48003E4F515120E21EFDA
+:1019F000F022F0E50B25E025E02482F582E43407AF
+:101A0000F583227488FEE5084407FFF5828E83E0A3
+:101A100022F0E5084407F58222F0E054C08F828E60
+:101A200083F022EF4407F582758386E05410D39447
+:101A30000022F0900715E004F0224406F582758339
+:101A40009EE022FEEF4407F5828E83E022E49007B9
+:101A50002AF0A3F012072A758382E0547F12072927
+:101A6000E04480F01210FC12081F7583A0E020E013
+:101A70001A90072BE004F0700690072AE004F0901B
+:101A8000072AE0B410E1A3E0B400DCEE44A6FCEFCA
+:101A90004407F5828C83E0F532EE44A8FEEF44075C
+:101AA000F5828E83E0F5332201201100042000909E
+:101AB00000200F9200210F9400220F9600230F9810
+:101AC00000240F9A00250F9C00260F9E00270FA0D0
+:101AD000012001A2012101A4012201A6012301A8E4
+:101AE000012401AA012501AC012601AE012701B0A4
+:101AF000012801B400280FB640280FB8612801CB97
+:101B0000EFCBCAEECA7F01E4FDEB4A7024E508F58D
+:101B10008274B6120829E508F58274B8120829E51E
+:101B200008F58274BA1208297E007C00120AFF8030
+:101B300012900726120735E541F090072412073569
+:101B4000E540F012072A75838EE41207297401120A
+:101B50000729E4F022E4F526F52753E1FEF52A757E
+:101B60002B01F5087F0112173130301C901AA9E4BF
+:101B700093F510901FF9E493F510900041E493F56C
+:101B800010901ECAE493F5107F02121731120F5401
+:101B90007F03121731120006E5E230E70912100048
+:101BA00030300312110002004712081F7583D0E085
+:101BB000C4540FFD7543017544FF1208AA7404F064
+:101BC000753B01ED14600C14600B14600F2403705E
+:101BD0000B800980001208A704F080061208A77481
+:101BE00004F0EE4482FEEF4407F5828E83E5451251
+:101BF00008BE758382E531F002114C8E608F611250
+:101C00001EA5E4FFCEEDCEEED39561E56012076B25
+:101C1000403974202EF582E43403F583E07003FF2D
+:101C200080261208E2FDC39F401ECFEDCFEB4A7025
+:101C30000B8D421208EEF5418E40800C1208E2F541
+:101C4000381208EEF5398E3A1E80BC22755801E52F
+:101C500035700C1207CCE0F54A1207D8E0F54CE5D8
+:101C600035B4040C1207E4E0F54A1207F0E0F54C35
+:101C7000E535B401047F0180027F00E535B402043C
+:101C80007E0180027E00EE4F600C1207FCE0F54AF8
+:101C9000120808E0F54C85414985404B22755B01EF
+:101CA000900724120735E0541FFFD3940250048F8D
+:101CB000588005EF24FEF558EFC394184005755978
+:101CC000188004EF04F55985435AAF587E00AD598A
+:101CD0007C00AB5B7A00121541AF5A7E0012180AE5
+:101CE000AF5B7E00021AFFE5E230E70E121003C27E
+:101CF000303030031210FF203328E5E730E70512BB
+:101D00000EA2800DE5FEC394205006120EA243F9E8
+:101D100008E5F230E70353F97FE5F15470D39400FE
+:101D200050D822120E04758380E4F0E508440712AF
+:101D30000DFD758384120E02758386120E02758363
+:101D40008CE054F3120E0375838E120E0275839489
+:101D5000E054FBF02212072A75838EE412072974DF
+:101D600001120729E41208BE75838CE04420120892
+:101D7000BEE054DFF07484850882F583E0547FF080
+:101D8000E04480F022755601E4FDF557AF35FEFCC6
+:101D9000120915121C9D121E7A121C4CAF577E00A0
+:101DA000AD567C00120444AF567E000211EE75560B
+:101DB00001E4FDF557AF35FEFC120915121C9D120A
+:101DC0001E7A121C4CAF577E00AD567C00120444A4
+:101DD000AF567E000211EEE4F516120E44FEE50841
+:101DE0004405FF120E658F828E83F00516E516C33B
+:101DF000941440E6E508120E2BE4F022E4F558F5C1
+:101E000059F55AFFFEAD58FC1209157F047E00AD4E
+:101E1000587C001209157F027E00AD587C00020933
+:101E200015E53C253EFCE5422400FBE433FAECC317
+:101E30009BEA12076B400B8C42E53D253FF5418F35
+:101E4000402212090B227484F5188508198519821D
+:101E5000851883E0547FF0E04480F0E04480F02275
+:101E6000EF4E700B12072A7583D2E054DFF0221276
+:101E7000072A7583D2E04420F02275580190072686
+:101E8000120735E0543FF541120732E0543FF54068
+:101E900022755602E4F557121DFCAF577E00AD5671
+:101EA0007C00020444E4F542F541F540F538F5398B
+:101EB000F53A22EF5407FFE5F954F84FF5F9227F80
+:101EC00001E4FE0F0EBEFFFB2201200001042000F2
+:101ED0000000000000000000000000000000000002
+:101EE00000000000000000000000000000000000F2
+:101EF00000000000000000000000000000000000E2
+:101F000000000000000000000000000000000000D1
+:101F100000000000000000000000000000000000C1
+:101F200000000000000000000000000000000000B1
+:101F300000000000000000000000000000000000A1
+:101F40000000000000000000000000000000000091
+:101F50000000000000000000000000000000000081
+:101F60000000000000000000000000000000000071
+:101F70000000000000000000000000000000000061
+:101F80000000000000000000000000000000000051
+:101F90000000000000000000000000000000000041
+:101FA0000000000000000000000000000000000031
+:101FB0000000000000000000000000000000000021
+:101FC0000000000000000000000000000000000011
+:101FD0000000000000000000000000000000000001
+:101FE00000000000000000000000000000000000F1
+:101FF000000000000000000001201100042000810A
+:00000001FF
diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c
index 25b300e..2bedc6c 100644
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -257,15 +257,13 @@
return total;
}
-static int v9fs_file_fsync(struct file *filp, struct dentry *dentry,
- int datasync)
+static int v9fs_file_fsync(struct file *filp, int datasync)
{
struct p9_fid *fid;
struct p9_wstat wstat;
int retval;
- P9_DPRINTK(P9_DEBUG_VFS, "filp %p dentry %p datasync %x\n", filp,
- dentry, datasync);
+ P9_DPRINTK(P9_DEBUG_VFS, "filp %p datasync %x\n", filp, datasync);
fid = filp->private_data;
v9fs_blank_wstat(&wstat);
diff --git a/fs/adfs/dir.c b/fs/adfs/dir.c
index 23aa52f..f4287e4 100644
--- a/fs/adfs/dir.c
+++ b/fs/adfs/dir.c
@@ -197,7 +197,7 @@
.read = generic_read_dir,
.llseek = generic_file_llseek,
.readdir = adfs_readdir,
- .fsync = simple_fsync,
+ .fsync = generic_file_fsync,
};
static int
diff --git a/fs/adfs/file.c b/fs/adfs/file.c
index 005ea34..a36da53 100644
--- a/fs/adfs/file.c
+++ b/fs/adfs/file.c
@@ -26,7 +26,7 @@
.read = do_sync_read,
.aio_read = generic_file_aio_read,
.mmap = generic_file_mmap,
- .fsync = simple_fsync,
+ .fsync = generic_file_fsync,
.write = do_sync_write,
.aio_write = generic_file_aio_write,
.splice_read = generic_file_splice_read,
diff --git a/fs/adfs/inode.c b/fs/adfs/inode.c
index 0f5e309..6f850b0 100644
--- a/fs/adfs/inode.c
+++ b/fs/adfs/inode.c
@@ -322,8 +322,9 @@
if (error)
goto out;
+ /* XXX: this is missing some actual on-disk truncation.. */
if (ia_valid & ATTR_SIZE)
- error = vmtruncate(inode, attr->ia_size);
+ error = simple_setsize(inode, attr->ia_size);
if (error)
goto out;
diff --git a/fs/affs/affs.h b/fs/affs/affs.h
index 861dae6..f05b615 100644
--- a/fs/affs/affs.h
+++ b/fs/affs/affs.h
@@ -183,7 +183,7 @@
void affs_free_prealloc(struct inode *inode);
extern void affs_truncate(struct inode *);
-int affs_file_fsync(struct file *, struct dentry *, int);
+int affs_file_fsync(struct file *, int);
/* dir.c */
diff --git a/fs/affs/file.c b/fs/affs/file.c
index 184e55c..322710c 100644
--- a/fs/affs/file.c
+++ b/fs/affs/file.c
@@ -916,9 +916,9 @@
affs_free_prealloc(inode);
}
-int affs_file_fsync(struct file *filp, struct dentry *dentry, int datasync)
+int affs_file_fsync(struct file *filp, int datasync)
{
- struct inode * inode = dentry->d_inode;
+ struct inode *inode = filp->f_mapping->host;
int ret, err;
ret = write_inode_now(inode, 0);
diff --git a/fs/affs/namei.c b/fs/affs/namei.c
index d70bbba..914d1c0 100644
--- a/fs/affs/namei.c
+++ b/fs/affs/namei.c
@@ -224,7 +224,7 @@
affs_brelse(bh);
inode = affs_iget(sb, ino);
if (IS_ERR(inode))
- return ERR_PTR(PTR_ERR(inode));
+ return ERR_CAST(inode);
}
dentry->d_op = AFFS_SB(sb)->s_flags & SF_INTL ? &affs_intl_dentry_operations : &affs_dentry_operations;
d_add(dentry, inode);
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index 807f284..5f679b7 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -740,7 +740,7 @@
extern ssize_t afs_file_write(struct kiocb *, const struct iovec *,
unsigned long, loff_t);
extern int afs_writeback_all(struct afs_vnode *);
-extern int afs_fsync(struct file *, struct dentry *, int);
+extern int afs_fsync(struct file *, int);
/*****************************************************************************/
diff --git a/fs/afs/server.c b/fs/afs/server.c
index f490995..9fdc7fe 100644
--- a/fs/afs/server.c
+++ b/fs/afs/server.c
@@ -91,9 +91,10 @@
memcpy(&server->addr, addr, sizeof(struct in_addr));
server->addr.s_addr = addr->s_addr;
+ _leave(" = %p{%d}", server, atomic_read(&server->usage));
+ } else {
+ _leave(" = NULL [nomem]");
}
-
- _leave(" = %p{%d}", server, atomic_read(&server->usage));
return server;
}
diff --git a/fs/afs/write.c b/fs/afs/write.c
index 3bed54a..722743b 100644
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -680,7 +680,6 @@
{
struct address_space *mapping = vnode->vfs_inode.i_mapping;
struct writeback_control wbc = {
- .bdi = mapping->backing_dev_info,
.sync_mode = WB_SYNC_ALL,
.nr_to_write = LONG_MAX,
.range_cyclic = 1,
@@ -701,8 +700,9 @@
* - the return status from this call provides a reliable indication of
* whether any write errors occurred for this process.
*/
-int afs_fsync(struct file *file, struct dentry *dentry, int datasync)
+int afs_fsync(struct file *file, int datasync)
{
+ struct dentry *dentry = file->f_path.dentry;
struct afs_writeback *wb, *xwb;
struct afs_vnode *vnode = AFS_FS_I(dentry->d_inode);
int ret;
diff --git a/fs/aio.c b/fs/aio.c
index 1cf12b3..1ccf25c 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -36,6 +36,7 @@
#include <linux/blkdev.h>
#include <linux/mempool.h>
#include <linux/hash.h>
+#include <linux/compat.h>
#include <asm/kmap_types.h>
#include <asm/uaccess.h>
@@ -526,7 +527,7 @@
/* Complete the fput(s) */
if (req->ki_filp != NULL)
- __fput(req->ki_filp);
+ fput(req->ki_filp);
/* Link the iocb into the context's free list */
spin_lock_irq(&ctx->ctx_lock);
@@ -559,11 +560,11 @@
/*
* Try to optimize the aio and eventfd file* puts, by avoiding to
- * schedule work in case it is not __fput() time. In normal cases,
+ * schedule work in case it is not final fput() time. In normal cases,
* we would not be holding the last reference to the file*, so
* this function will be executed w/out any aio kthread wakeup.
*/
- if (unlikely(atomic_long_dec_and_test(&req->ki_filp->f_count))) {
+ if (unlikely(!fput_atomic(req->ki_filp))) {
get_ioctx(ctx);
spin_lock(&fput_lock);
list_add(&req->ki_list, &fput_head);
@@ -1384,13 +1385,22 @@
return ret;
}
-static ssize_t aio_setup_vectored_rw(int type, struct kiocb *kiocb)
+static ssize_t aio_setup_vectored_rw(int type, struct kiocb *kiocb, bool compat)
{
ssize_t ret;
- ret = rw_copy_check_uvector(type, (struct iovec __user *)kiocb->ki_buf,
- kiocb->ki_nbytes, 1,
- &kiocb->ki_inline_vec, &kiocb->ki_iovec);
+#ifdef CONFIG_COMPAT
+ if (compat)
+ ret = compat_rw_copy_check_uvector(type,
+ (struct compat_iovec __user *)kiocb->ki_buf,
+ kiocb->ki_nbytes, 1, &kiocb->ki_inline_vec,
+ &kiocb->ki_iovec);
+ else
+#endif
+ ret = rw_copy_check_uvector(type,
+ (struct iovec __user *)kiocb->ki_buf,
+ kiocb->ki_nbytes, 1, &kiocb->ki_inline_vec,
+ &kiocb->ki_iovec);
if (ret < 0)
goto out;
@@ -1420,7 +1430,7 @@
* Performs the initial checks and aio retry method
* setup for the kiocb at the time of io submission.
*/
-static ssize_t aio_setup_iocb(struct kiocb *kiocb)
+static ssize_t aio_setup_iocb(struct kiocb *kiocb, bool compat)
{
struct file *file = kiocb->ki_filp;
ssize_t ret = 0;
@@ -1469,7 +1479,7 @@
ret = security_file_permission(file, MAY_READ);
if (unlikely(ret))
break;
- ret = aio_setup_vectored_rw(READ, kiocb);
+ ret = aio_setup_vectored_rw(READ, kiocb, compat);
if (ret)
break;
ret = -EINVAL;
@@ -1483,7 +1493,7 @@
ret = security_file_permission(file, MAY_WRITE);
if (unlikely(ret))
break;
- ret = aio_setup_vectored_rw(WRITE, kiocb);
+ ret = aio_setup_vectored_rw(WRITE, kiocb, compat);
if (ret)
break;
ret = -EINVAL;
@@ -1548,7 +1558,8 @@
}
static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb,
- struct iocb *iocb, struct hlist_head *batch_hash)
+ struct iocb *iocb, struct hlist_head *batch_hash,
+ bool compat)
{
struct kiocb *req;
struct file *file;
@@ -1609,7 +1620,7 @@
req->ki_left = req->ki_nbytes = iocb->aio_nbytes;
req->ki_opcode = iocb->aio_lio_opcode;
- ret = aio_setup_iocb(req);
+ ret = aio_setup_iocb(req, compat);
if (ret)
goto out_put_req;
@@ -1637,20 +1648,8 @@
return ret;
}
-/* sys_io_submit:
- * Queue the nr iocbs pointed to by iocbpp for processing. Returns
- * the number of iocbs queued. May return -EINVAL if the aio_context
- * specified by ctx_id is invalid, if nr is < 0, if the iocb at
- * *iocbpp[0] is not properly initialized, if the operation specified
- * is invalid for the file descriptor in the iocb. May fail with
- * -EFAULT if any of the data structures point to invalid data. May
- * fail with -EBADF if the file descriptor specified in the first
- * iocb is invalid. May fail with -EAGAIN if insufficient resources
- * are available to queue any iocbs. Will return 0 if nr is 0. Will
- * fail with -ENOSYS if not implemented.
- */
-SYSCALL_DEFINE3(io_submit, aio_context_t, ctx_id, long, nr,
- struct iocb __user * __user *, iocbpp)
+long do_io_submit(aio_context_t ctx_id, long nr,
+ struct iocb __user *__user *iocbpp, bool compat)
{
struct kioctx *ctx;
long ret = 0;
@@ -1687,7 +1686,7 @@
break;
}
- ret = io_submit_one(ctx, user_iocb, &tmp, batch_hash);
+ ret = io_submit_one(ctx, user_iocb, &tmp, batch_hash, compat);
if (ret)
break;
}
@@ -1697,6 +1696,24 @@
return i ? i : ret;
}
+/* sys_io_submit:
+ * Queue the nr iocbs pointed to by iocbpp for processing. Returns
+ * the number of iocbs queued. May return -EINVAL if the aio_context
+ * specified by ctx_id is invalid, if nr is < 0, if the iocb at
+ * *iocbpp[0] is not properly initialized, if the operation specified
+ * is invalid for the file descriptor in the iocb. May fail with
+ * -EFAULT if any of the data structures point to invalid data. May
+ * fail with -EBADF if the file descriptor specified in the first
+ * iocb is invalid. May fail with -EAGAIN if insufficient resources
+ * are available to queue any iocbs. Will return 0 if nr is 0. Will
+ * fail with -ENOSYS if not implemented.
+ */
+SYSCALL_DEFINE3(io_submit, aio_context_t, ctx_id, long, nr,
+ struct iocb __user * __user *, iocbpp)
+{
+ return do_io_submit(ctx_id, nr, iocbpp, 0);
+}
+
/* lookup_kiocb
* Finds a given iocb for cancellation.
*/
diff --git a/fs/anon_inodes.c b/fs/anon_inodes.c
index 9bd4b38..e4b75d6 100644
--- a/fs/anon_inodes.c
+++ b/fs/anon_inodes.c
@@ -205,7 +205,7 @@
* that it already _is_ on the dirty list.
*/
inode->i_state = I_DIRTY;
- inode->i_mode = S_IFREG | S_IRUSR | S_IWUSR;
+ inode->i_mode = S_IRUSR | S_IWUSR;
inode->i_uid = current_fsuid();
inode->i_gid = current_fsgid();
inode->i_flags |= S_PRIVATE;
diff --git a/fs/attr.c b/fs/attr.c
index 0815e93..b4fa3b0 100644
--- a/fs/attr.c
+++ b/fs/attr.c
@@ -67,14 +67,14 @@
* @offset: the new size to assign to the inode
* @Returns: 0 on success, -ve errno on failure
*
+ * inode_newsize_ok must be called with i_mutex held.
+ *
* inode_newsize_ok will check filesystem limits and ulimits to check that the
* new inode size is within limits. inode_newsize_ok will also send SIGXFSZ
* when necessary. Caller must not proceed with inode size change if failure is
* returned. @inode must be a file (not directory), with appropriate
* permissions to allow truncate (inode_newsize_ok does NOT check these
* conditions).
- *
- * inode_newsize_ok must be called with i_mutex held.
*/
int inode_newsize_ok(const struct inode *inode, loff_t offset)
{
@@ -104,17 +104,25 @@
}
EXPORT_SYMBOL(inode_newsize_ok);
-int inode_setattr(struct inode * inode, struct iattr * attr)
+/**
+ * generic_setattr - copy simple metadata updates into the generic inode
+ * @inode: the inode to be updated
+ * @attr: the new attributes
+ *
+ * generic_setattr must be called with i_mutex held.
+ *
+ * generic_setattr updates the inode's metadata with that specified
+ * in attr. Noticably missing is inode size update, which is more complex
+ * as it requires pagecache updates. See simple_setsize.
+ *
+ * The inode is not marked as dirty after this operation. The rationale is
+ * that for "simple" filesystems, the struct inode is the inode storage.
+ * The caller is free to mark the inode dirty afterwards if needed.
+ */
+void generic_setattr(struct inode *inode, const struct iattr *attr)
{
unsigned int ia_valid = attr->ia_valid;
- if (ia_valid & ATTR_SIZE &&
- attr->ia_size != i_size_read(inode)) {
- int error = vmtruncate(inode, attr->ia_size);
- if (error)
- return error;
- }
-
if (ia_valid & ATTR_UID)
inode->i_uid = attr->ia_uid;
if (ia_valid & ATTR_GID)
@@ -135,6 +143,28 @@
mode &= ~S_ISGID;
inode->i_mode = mode;
}
+}
+EXPORT_SYMBOL(generic_setattr);
+
+/*
+ * note this function is deprecated, the new truncate sequence should be
+ * used instead -- see eg. simple_setsize, generic_setattr.
+ */
+int inode_setattr(struct inode *inode, const struct iattr *attr)
+{
+ unsigned int ia_valid = attr->ia_valid;
+
+ if (ia_valid & ATTR_SIZE &&
+ attr->ia_size != i_size_read(inode)) {
+ int error;
+
+ error = vmtruncate(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
+ generic_setattr(inode, attr);
+
mark_inode_dirty(inode);
return 0;
diff --git a/fs/autofs/root.c b/fs/autofs/root.c
index 8713c7c..9a0520b 100644
--- a/fs/autofs/root.c
+++ b/fs/autofs/root.c
@@ -28,6 +28,7 @@
static int autofs_root_ioctl(struct inode *, struct file *,unsigned int,unsigned long);
const struct file_operations autofs_root_operations = {
+ .llseek = generic_file_llseek,
.read = generic_read_dir,
.readdir = autofs_root_readdir,
.ioctl = autofs_root_ioctl,
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index d832062..ba4a38b 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -95,7 +95,7 @@
*/
static struct autofs_dev_ioctl *copy_dev_ioctl(struct autofs_dev_ioctl __user *in)
{
- struct autofs_dev_ioctl tmp, *ads;
+ struct autofs_dev_ioctl tmp;
if (copy_from_user(&tmp, in, sizeof(tmp)))
return ERR_PTR(-EFAULT);
@@ -103,16 +103,7 @@
if (tmp.size < sizeof(tmp))
return ERR_PTR(-EINVAL);
- ads = kmalloc(tmp.size, GFP_KERNEL);
- if (!ads)
- return ERR_PTR(-ENOMEM);
-
- if (copy_from_user(ads, in, tmp.size)) {
- kfree(ads);
- return ERR_PTR(-EFAULT);
- }
-
- return ads;
+ return memdup_user(in, tmp.size);
}
static inline void free_dev_ioctl(struct autofs_dev_ioctl *param)
diff --git a/fs/bad_inode.c b/fs/bad_inode.c
index a05287a..52e59bf 100644
--- a/fs/bad_inode.c
+++ b/fs/bad_inode.c
@@ -93,8 +93,7 @@
return -EIO;
}
-static int bad_file_fsync(struct file *file, struct dentry *dentry,
- int datasync)
+static int bad_file_fsync(struct file *file, int datasync)
{
return -EIO;
}
diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c
index 8f73841..d967e05 100644
--- a/fs/bfs/dir.c
+++ b/fs/bfs/dir.c
@@ -78,7 +78,7 @@
const struct file_operations bfs_dir_operations = {
.read = generic_read_dir,
.readdir = bfs_readdir,
- .fsync = simple_fsync,
+ .fsync = generic_file_fsync,
.llseek = generic_file_llseek,
};
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index 2c5f9a0..63039ed 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -990,10 +990,9 @@
/* clear any space allocated but not loaded */
if (phdr->p_filesz < phdr->p_memsz) {
- ret = clear_user((void *) (seg->addr + phdr->p_filesz),
- phdr->p_memsz - phdr->p_filesz);
- if (ret)
- return ret;
+ if (clear_user((void *) (seg->addr + phdr->p_filesz),
+ phdr->p_memsz - phdr->p_filesz))
+ return -EFAULT;
}
if (mm) {
@@ -1027,7 +1026,7 @@
struct elf32_fdpic_loadseg *seg;
struct elf32_phdr *phdr;
unsigned long load_addr, delta_vaddr;
- int loop, dvset, ret;
+ int loop, dvset;
load_addr = params->load_addr;
delta_vaddr = 0;
@@ -1127,9 +1126,8 @@
* PT_LOAD */
if (prot & PROT_WRITE && disp > 0) {
kdebug("clear[%d] ad=%lx sz=%lx", loop, maddr, disp);
- ret = clear_user((void __user *) maddr, disp);
- if (ret)
- return ret;
+ if (clear_user((void __user *) maddr, disp))
+ return -EFAULT;
maddr += disp;
}
@@ -1164,19 +1162,17 @@
if (prot & PROT_WRITE && excess1 > 0) {
kdebug("clear[%d] ad=%lx sz=%lx",
loop, maddr + phdr->p_filesz, excess1);
- ret = clear_user((void __user *) maddr + phdr->p_filesz,
- excess1);
- if (ret)
- return ret;
+ if (clear_user((void __user *) maddr + phdr->p_filesz,
+ excess1))
+ return -EFAULT;
}
#else
if (excess > 0) {
kdebug("clear[%d] ad=%lx sz=%lx",
loop, maddr + phdr->p_filesz, excess);
- ret = clear_user((void *) maddr + phdr->p_filesz, excess);
- if (ret)
- return ret;
+ if (clear_user((void *) maddr + phdr->p_filesz, excess))
+ return -EFAULT;
}
#endif
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 49566c1..811384b 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -56,16 +56,19 @@
#endif
/*
- * User data (stack, data section and bss) needs to be aligned
- * for the same reasons as SLAB memory is, and to the same amount.
- * Avoid duplicating architecture specific code by using the same
- * macro as with SLAB allocation:
+ * User data (data section and bss) needs to be aligned.
+ * We pick 0x20 here because it is the max value elf2flt has always
+ * used in producing FLAT files, and because it seems to be large
+ * enough to make all the gcc alignment related tests happy.
*/
-#ifdef ARCH_SLAB_MINALIGN
-#define FLAT_DATA_ALIGN (ARCH_SLAB_MINALIGN)
-#else
-#define FLAT_DATA_ALIGN (sizeof(void *))
-#endif
+#define FLAT_DATA_ALIGN (0x20)
+
+/*
+ * User data (stack) also needs to be aligned.
+ * Here we can be a bit looser than the data sections since this
+ * needs to only meet arch ABI requirements.
+ */
+#define FLAT_STACK_ALIGN max_t(unsigned long, sizeof(void *), ARCH_SLAB_MINALIGN)
#define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */
#define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */
@@ -129,7 +132,7 @@
sp = (unsigned long *)p;
sp -= (envc + argc + 2) + 1 + (flat_argvp_envp_on_stack() ? 2 : 0);
- sp = (unsigned long *) ((unsigned long)sp & -FLAT_DATA_ALIGN);
+ sp = (unsigned long *) ((unsigned long)sp & -FLAT_STACK_ALIGN);
argv = sp + 1 + (flat_argvp_envp_on_stack() ? 2 : 0);
envp = argv + (argc + 1);
@@ -589,7 +592,7 @@
if (IS_ERR_VALUE(result)) {
printk("Unable to read data+bss, errno %d\n", (int)-result);
do_munmap(current->mm, textpos, text_len);
- do_munmap(current->mm, realdatastart, data_len + extra);
+ do_munmap(current->mm, realdatastart, len);
ret = result;
goto err;
}
@@ -876,7 +879,7 @@
stack_len = TOP_OF_ARGS - bprm->p; /* the strings */
stack_len += (bprm->argc + 1) * sizeof(char *); /* the argv array */
stack_len += (bprm->envc + 1) * sizeof(char *); /* the envp array */
- stack_len += FLAT_DATA_ALIGN - 1; /* reserve for upcoming alignment */
+ stack_len += FLAT_STACK_ALIGN - 1; /* reserve for upcoming alignment */
res = load_flat_file(bprm, &libinfo, 0, &stack_len);
if (IS_ERR_VALUE(res))
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 26e5f50..99d6af8 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -172,8 +172,9 @@
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_mapping->host;
- return blockdev_direct_IO_no_locking(rw, iocb, inode, I_BDEV(inode),
- iov, offset, nr_segs, blkdev_get_blocks, NULL);
+ return blockdev_direct_IO_no_locking_newtrunc(rw, iocb, inode,
+ I_BDEV(inode), iov, offset, nr_segs,
+ blkdev_get_blocks, NULL);
}
int __sync_blockdev(struct block_device *bdev, int wait)
@@ -309,8 +310,8 @@
struct page **pagep, void **fsdata)
{
*pagep = NULL;
- return block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- blkdev_get_block);
+ return block_write_begin_newtrunc(file, mapping, pos, len, flags,
+ pagep, fsdata, blkdev_get_block);
}
static int blkdev_write_end(struct file *file, struct address_space *mapping,
@@ -358,12 +359,7 @@
return retval;
}
-/*
- * Filp is never NULL; the only case when ->fsync() is called with
- * NULL first argument is nfsd_sync_dir() and that's not a directory.
- */
-
-int blkdev_fsync(struct file *filp, struct dentry *dentry, int datasync)
+int blkdev_fsync(struct file *filp, int datasync)
{
struct inode *bd_inode = filp->f_mapping->host;
struct block_device *bdev = I_BDEV(bd_inode);
@@ -710,8 +706,13 @@
* @bdev is about to be opened exclusively. Check @bdev can be opened
* exclusively and mark that an exclusive open is in progress. Each
* successful call to this function must be matched with a call to
- * either bd_claim() or bd_abort_claiming(). If this function
- * succeeds, the matching bd_claim() is guaranteed to succeed.
+ * either bd_finish_claiming() or bd_abort_claiming() (which do not
+ * fail).
+ *
+ * This function is used to gain exclusive access to the block device
+ * without actually causing other exclusive open attempts to fail. It
+ * should be used when the open sequence itself requires exclusive
+ * access but may subsequently fail.
*
* CONTEXT:
* Might sleep.
@@ -738,6 +739,7 @@
return ERR_PTR(-ENXIO);
whole = bdget_disk(disk, 0);
+ module_put(disk->fops->owner);
put_disk(disk);
if (!whole)
return ERR_PTR(-ENOMEM);
@@ -786,15 +788,46 @@
__bd_abort_claiming(whole, holder); /* releases bdev_lock */
}
+/* increment holders when we have a legitimate claim. requires bdev_lock */
+static void __bd_claim(struct block_device *bdev, struct block_device *whole,
+ void *holder)
+{
+ /* note that for a whole device bd_holders
+ * will be incremented twice, and bd_holder will
+ * be set to bd_claim before being set to holder
+ */
+ whole->bd_holders++;
+ whole->bd_holder = bd_claim;
+ bdev->bd_holders++;
+ bdev->bd_holder = holder;
+}
+
+/**
+ * bd_finish_claiming - finish claiming a block device
+ * @bdev: block device of interest (passed to bd_start_claiming())
+ * @whole: whole block device returned by bd_start_claiming()
+ * @holder: holder trying to claim @bdev
+ *
+ * Finish a claiming block started by bd_start_claiming().
+ *
+ * CONTEXT:
+ * Grabs and releases bdev_lock.
+ */
+static void bd_finish_claiming(struct block_device *bdev,
+ struct block_device *whole, void *holder)
+{
+ spin_lock(&bdev_lock);
+ BUG_ON(!bd_may_claim(bdev, whole, holder));
+ __bd_claim(bdev, whole, holder);
+ __bd_abort_claiming(whole, holder); /* not actually an abort */
+}
+
/**
* bd_claim - claim a block device
* @bdev: block device to claim
* @holder: holder trying to claim @bdev
*
- * Try to claim @bdev which must have been opened successfully. This
- * function may be called with or without preceding
- * blk_start_claiming(). In the former case, this function is always
- * successful and terminates the claiming block.
+ * Try to claim @bdev which must have been opened successfully.
*
* CONTEXT:
* Might sleep.
@@ -810,23 +843,10 @@
might_sleep();
spin_lock(&bdev_lock);
-
res = bd_prepare_to_claim(bdev, whole, holder);
- if (res == 0) {
- /* note that for a whole device bd_holders
- * will be incremented twice, and bd_holder will
- * be set to bd_claim before being set to holder
- */
- whole->bd_holders++;
- whole->bd_holder = bd_claim;
- bdev->bd_holders++;
- bdev->bd_holder = holder;
- }
-
- if (whole->bd_claiming)
- __bd_abort_claiming(whole, holder); /* releases bdev_lock */
- else
- spin_unlock(&bdev_lock);
+ if (res == 0)
+ __bd_claim(bdev, whole, holder);
+ spin_unlock(&bdev_lock);
return res;
}
@@ -1480,7 +1500,7 @@
if (whole) {
if (res == 0)
- BUG_ON(bd_claim(bdev, filp) != 0);
+ bd_finish_claiming(bdev, whole, filp);
else
bd_abort_claiming(whole, filp);
}
@@ -1716,7 +1736,7 @@
if ((mode & FMODE_WRITE) && bdev_read_only(bdev))
goto out_blkdev_put;
- BUG_ON(bd_claim(bdev, holder) != 0);
+ bd_finish_claiming(bdev, whole, holder);
return bdev;
out_blkdev_put:
diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c
index 8d432cd..2222d16 100644
--- a/fs/btrfs/acl.c
+++ b/fs/btrfs/acl.c
@@ -60,6 +60,8 @@
size = __btrfs_getxattr(inode, name, value, size);
if (size > 0) {
acl = posix_acl_from_xattr(value, size);
+ if (IS_ERR(acl))
+ return acl;
set_cached_acl(inode, type, acl);
}
kfree(value);
@@ -160,6 +162,12 @@
int ret;
struct posix_acl *acl = NULL;
+ if (!is_owner_or_cap(dentry->d_inode))
+ return -EPERM;
+
+ if (!IS_POSIXACL(dentry->d_inode))
+ return -EOPNOTSUPP;
+
if (value) {
acl = posix_acl_from_xattr(value, size);
if (acl == NULL) {
diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c
index 462859a..7ec1409 100644
--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -377,6 +377,7 @@
if (!list_empty(&worker->pending) ||
!list_empty(&worker->prio_pending)) {
spin_unlock_irq(&worker->lock);
+ set_current_state(TASK_RUNNING);
goto again;
}
diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h
index 7a4dee1..6ad63f1 100644
--- a/fs/btrfs/btrfs_inode.h
+++ b/fs/btrfs/btrfs_inode.h
@@ -137,8 +137,8 @@
* of extent items we've reserved metadata for.
*/
spinlock_t accounting_lock;
+ atomic_t outstanding_extents;
int reserved_extents;
- int outstanding_extents;
/*
* ordered_data_close is set by truncate when a file that used
@@ -151,6 +151,7 @@
* of these.
*/
unsigned ordered_data_close:1;
+ unsigned orphan_meta_reserved:1;
unsigned dummy_inode:1;
/*
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 6795a71..c3df14c 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -280,7 +280,8 @@
static noinline int update_ref_for_cow(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct extent_buffer *buf,
- struct extent_buffer *cow)
+ struct extent_buffer *cow,
+ int *last_ref)
{
u64 refs;
u64 owner;
@@ -366,6 +367,7 @@
BUG_ON(ret);
}
clean_tree_block(trans, root, buf);
+ *last_ref = 1;
}
return 0;
}
@@ -392,6 +394,7 @@
struct btrfs_disk_key disk_key;
struct extent_buffer *cow;
int level;
+ int last_ref = 0;
int unlock_orig = 0;
u64 parent_start;
@@ -442,7 +445,10 @@
(unsigned long)btrfs_header_fsid(cow),
BTRFS_FSID_SIZE);
- update_ref_for_cow(trans, root, buf, cow);
+ update_ref_for_cow(trans, root, buf, cow, &last_ref);
+
+ if (root->ref_cows)
+ btrfs_reloc_cow_block(trans, root, buf, cow);
if (buf == root->node) {
WARN_ON(parent && parent != buf);
@@ -457,8 +463,8 @@
extent_buffer_get(cow);
spin_unlock(&root->node_lock);
- btrfs_free_tree_block(trans, root, buf->start, buf->len,
- parent_start, root->root_key.objectid, level);
+ btrfs_free_tree_block(trans, root, buf, parent_start,
+ last_ref);
free_extent_buffer(buf);
add_root_to_dirty_list(root);
} else {
@@ -473,8 +479,8 @@
btrfs_set_node_ptr_generation(parent, parent_slot,
trans->transid);
btrfs_mark_buffer_dirty(parent);
- btrfs_free_tree_block(trans, root, buf->start, buf->len,
- parent_start, root->root_key.objectid, level);
+ btrfs_free_tree_block(trans, root, buf, parent_start,
+ last_ref);
}
if (unlock_orig)
btrfs_tree_unlock(buf);
@@ -949,6 +955,22 @@
return bin_search(eb, key, level, slot);
}
+static void root_add_used(struct btrfs_root *root, u32 size)
+{
+ spin_lock(&root->accounting_lock);
+ btrfs_set_root_used(&root->root_item,
+ btrfs_root_used(&root->root_item) + size);
+ spin_unlock(&root->accounting_lock);
+}
+
+static void root_sub_used(struct btrfs_root *root, u32 size)
+{
+ spin_lock(&root->accounting_lock);
+ btrfs_set_root_used(&root->root_item,
+ btrfs_root_used(&root->root_item) - size);
+ spin_unlock(&root->accounting_lock);
+}
+
/* given a node and slot number, this reads the blocks it points to. The
* extent buffer is returned with a reference taken (but unlocked).
* NULL is returned on error.
@@ -1019,7 +1041,11 @@
btrfs_tree_lock(child);
btrfs_set_lock_blocking(child);
ret = btrfs_cow_block(trans, root, child, mid, 0, &child);
- BUG_ON(ret);
+ if (ret) {
+ btrfs_tree_unlock(child);
+ free_extent_buffer(child);
+ goto enospc;
+ }
spin_lock(&root->node_lock);
root->node = child;
@@ -1034,11 +1060,12 @@
btrfs_tree_unlock(mid);
/* once for the path */
free_extent_buffer(mid);
- ret = btrfs_free_tree_block(trans, root, mid->start, mid->len,
- 0, root->root_key.objectid, level);
+
+ root_sub_used(root, mid->len);
+ btrfs_free_tree_block(trans, root, mid, 0, 1);
/* once for the root ptr */
free_extent_buffer(mid);
- return ret;
+ return 0;
}
if (btrfs_header_nritems(mid) >
BTRFS_NODEPTRS_PER_BLOCK(root) / 4)
@@ -1088,23 +1115,16 @@
if (wret < 0 && wret != -ENOSPC)
ret = wret;
if (btrfs_header_nritems(right) == 0) {
- u64 bytenr = right->start;
- u32 blocksize = right->len;
-
clean_tree_block(trans, root, right);
btrfs_tree_unlock(right);
- free_extent_buffer(right);
- right = NULL;
wret = del_ptr(trans, root, path, level + 1, pslot +
1);
if (wret)
ret = wret;
- wret = btrfs_free_tree_block(trans, root,
- bytenr, blocksize, 0,
- root->root_key.objectid,
- level);
- if (wret)
- ret = wret;
+ root_sub_used(root, right->len);
+ btrfs_free_tree_block(trans, root, right, 0, 1);
+ free_extent_buffer(right);
+ right = NULL;
} else {
struct btrfs_disk_key right_key;
btrfs_node_key(right, &right_key, 0);
@@ -1136,21 +1156,15 @@
BUG_ON(wret == 1);
}
if (btrfs_header_nritems(mid) == 0) {
- /* we've managed to empty the middle node, drop it */
- u64 bytenr = mid->start;
- u32 blocksize = mid->len;
-
clean_tree_block(trans, root, mid);
btrfs_tree_unlock(mid);
- free_extent_buffer(mid);
- mid = NULL;
wret = del_ptr(trans, root, path, level + 1, pslot);
if (wret)
ret = wret;
- wret = btrfs_free_tree_block(trans, root, bytenr, blocksize,
- 0, root->root_key.objectid, level);
- if (wret)
- ret = wret;
+ root_sub_used(root, mid->len);
+ btrfs_free_tree_block(trans, root, mid, 0, 1);
+ free_extent_buffer(mid);
+ mid = NULL;
} else {
/* update the parent key to reflect our changes */
struct btrfs_disk_key mid_key;
@@ -1590,7 +1604,7 @@
btrfs_release_path(NULL, p);
ret = -EAGAIN;
- tmp = read_tree_block(root, blocknr, blocksize, gen);
+ tmp = read_tree_block(root, blocknr, blocksize, 0);
if (tmp) {
/*
* If the read above didn't mark this buffer up to date,
@@ -1740,7 +1754,6 @@
p->nodes[level + 1],
p->slots[level + 1], &b);
if (err) {
- free_extent_buffer(b);
ret = err;
goto done;
}
@@ -2076,6 +2089,8 @@
if (IS_ERR(c))
return PTR_ERR(c);
+ root_add_used(root, root->nodesize);
+
memset_extent_buffer(c, 0, 0, sizeof(struct btrfs_header));
btrfs_set_header_nritems(c, 1);
btrfs_set_header_level(c, level);
@@ -2134,6 +2149,7 @@
int nritems;
BUG_ON(!path->nodes[level]);
+ btrfs_assert_tree_locked(path->nodes[level]);
lower = path->nodes[level];
nritems = btrfs_header_nritems(lower);
BUG_ON(slot > nritems);
@@ -2202,6 +2218,8 @@
if (IS_ERR(split))
return PTR_ERR(split);
+ root_add_used(root, root->nodesize);
+
memset_extent_buffer(split, 0, 0, sizeof(struct btrfs_header));
btrfs_set_header_level(split, btrfs_header_level(c));
btrfs_set_header_bytenr(split, split->start);
@@ -2286,12 +2304,17 @@
return ret;
}
+/*
+ * min slot controls the lowest index we're willing to push to the
+ * right. We'll push up to and including min_slot, but no lower
+ */
static noinline int __push_leaf_right(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path,
int data_size, int empty,
struct extent_buffer *right,
- int free_space, u32 left_nritems)
+ int free_space, u32 left_nritems,
+ u32 min_slot)
{
struct extent_buffer *left = path->nodes[0];
struct extent_buffer *upper = path->nodes[1];
@@ -2309,7 +2332,7 @@
if (empty)
nr = 0;
else
- nr = 1;
+ nr = max_t(u32, 1, min_slot);
if (path->slots[0] >= left_nritems)
push_space += data_size;
@@ -2415,6 +2438,9 @@
if (left_nritems)
btrfs_mark_buffer_dirty(left);
+ else
+ clean_tree_block(trans, root, left);
+
btrfs_mark_buffer_dirty(right);
btrfs_item_key(right, &disk_key, 0);
@@ -2448,10 +2474,14 @@
*
* returns 1 if the push failed because the other node didn't have enough
* room, 0 if everything worked out and < 0 if there were major errors.
+ *
+ * this will push starting from min_slot to the end of the leaf. It won't
+ * push any slot lower than min_slot
*/
static int push_leaf_right(struct btrfs_trans_handle *trans, struct btrfs_root
- *root, struct btrfs_path *path, int data_size,
- int empty)
+ *root, struct btrfs_path *path,
+ int min_data_size, int data_size,
+ int empty, u32 min_slot)
{
struct extent_buffer *left = path->nodes[0];
struct extent_buffer *right;
@@ -2493,8 +2523,8 @@
if (left_nritems == 0)
goto out_unlock;
- return __push_leaf_right(trans, root, path, data_size, empty,
- right, free_space, left_nritems);
+ return __push_leaf_right(trans, root, path, min_data_size, empty,
+ right, free_space, left_nritems, min_slot);
out_unlock:
btrfs_tree_unlock(right);
free_extent_buffer(right);
@@ -2504,12 +2534,17 @@
/*
* push some data in the path leaf to the left, trying to free up at
* least data_size bytes. returns zero if the push worked, nonzero otherwise
+ *
+ * max_slot can put a limit on how far into the leaf we'll push items. The
+ * item at 'max_slot' won't be touched. Use (u32)-1 to make us do all the
+ * items
*/
static noinline int __push_leaf_left(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path, int data_size,
int empty, struct extent_buffer *left,
- int free_space, int right_nritems)
+ int free_space, u32 right_nritems,
+ u32 max_slot)
{
struct btrfs_disk_key disk_key;
struct extent_buffer *right = path->nodes[0];
@@ -2528,9 +2563,9 @@
slot = path->slots[1];
if (empty)
- nr = right_nritems;
+ nr = min(right_nritems, max_slot);
else
- nr = right_nritems - 1;
+ nr = min(right_nritems - 1, max_slot);
for (i = 0; i < nr; i++) {
item = btrfs_item_nr(right, i);
@@ -2660,6 +2695,8 @@
btrfs_mark_buffer_dirty(left);
if (right_nritems)
btrfs_mark_buffer_dirty(right);
+ else
+ clean_tree_block(trans, root, right);
btrfs_item_key(right, &disk_key, 0);
wret = fixup_low_keys(trans, root, path, &disk_key, 1);
@@ -2669,8 +2706,6 @@
/* then fixup the leaf pointer in the path */
if (path->slots[0] < push_items) {
path->slots[0] += old_left_nritems;
- if (btrfs_header_nritems(path->nodes[0]) == 0)
- clean_tree_block(trans, root, path->nodes[0]);
btrfs_tree_unlock(path->nodes[0]);
free_extent_buffer(path->nodes[0]);
path->nodes[0] = left;
@@ -2691,10 +2726,14 @@
/*
* push some data in the path leaf to the left, trying to free up at
* least data_size bytes. returns zero if the push worked, nonzero otherwise
+ *
+ * max_slot can put a limit on how far into the leaf we'll push items. The
+ * item at 'max_slot' won't be touched. Use (u32)-1 to make us push all the
+ * items
*/
static int push_leaf_left(struct btrfs_trans_handle *trans, struct btrfs_root
- *root, struct btrfs_path *path, int data_size,
- int empty)
+ *root, struct btrfs_path *path, int min_data_size,
+ int data_size, int empty, u32 max_slot)
{
struct extent_buffer *right = path->nodes[0];
struct extent_buffer *left;
@@ -2740,8 +2779,9 @@
goto out;
}
- return __push_leaf_left(trans, root, path, data_size,
- empty, left, free_space, right_nritems);
+ return __push_leaf_left(trans, root, path, min_data_size,
+ empty, left, free_space, right_nritems,
+ max_slot);
out:
btrfs_tree_unlock(left);
free_extent_buffer(left);
@@ -2834,6 +2874,64 @@
}
/*
+ * double splits happen when we need to insert a big item in the middle
+ * of a leaf. A double split can leave us with 3 mostly empty leaves:
+ * leaf: [ slots 0 - N] [ our target ] [ N + 1 - total in leaf ]
+ * A B C
+ *
+ * We avoid this by trying to push the items on either side of our target
+ * into the adjacent leaves. If all goes well we can avoid the double split
+ * completely.
+ */
+static noinline int push_for_double_split(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct btrfs_path *path,
+ int data_size)
+{
+ int ret;
+ int progress = 0;
+ int slot;
+ u32 nritems;
+
+ slot = path->slots[0];
+
+ /*
+ * try to push all the items after our slot into the
+ * right leaf
+ */
+ ret = push_leaf_right(trans, root, path, 1, data_size, 0, slot);
+ if (ret < 0)
+ return ret;
+
+ if (ret == 0)
+ progress++;
+
+ nritems = btrfs_header_nritems(path->nodes[0]);
+ /*
+ * our goal is to get our slot at the start or end of a leaf. If
+ * we've done so we're done
+ */
+ if (path->slots[0] == 0 || path->slots[0] == nritems)
+ return 0;
+
+ if (btrfs_leaf_free_space(root, path->nodes[0]) >= data_size)
+ return 0;
+
+ /* try to push all the items before our slot into the next leaf */
+ slot = path->slots[0];
+ ret = push_leaf_left(trans, root, path, 1, data_size, 0, slot);
+ if (ret < 0)
+ return ret;
+
+ if (ret == 0)
+ progress++;
+
+ if (progress)
+ return 0;
+ return 1;
+}
+
+/*
* split the path's leaf in two, making sure there is at least data_size
* available for the resulting leaf level of the path.
*
@@ -2855,6 +2953,7 @@
int wret;
int split;
int num_doubles = 0;
+ int tried_avoid_double = 0;
l = path->nodes[0];
slot = path->slots[0];
@@ -2863,12 +2962,14 @@
return -EOVERFLOW;
/* first try to make some room by pushing left and right */
- if (data_size && ins_key->type != BTRFS_DIR_ITEM_KEY) {
- wret = push_leaf_right(trans, root, path, data_size, 0);
+ if (data_size) {
+ wret = push_leaf_right(trans, root, path, data_size,
+ data_size, 0, 0);
if (wret < 0)
return wret;
if (wret) {
- wret = push_leaf_left(trans, root, path, data_size, 0);
+ wret = push_leaf_left(trans, root, path, data_size,
+ data_size, 0, (u32)-1);
if (wret < 0)
return wret;
}
@@ -2902,6 +3003,8 @@
if (mid != nritems &&
leaf_space_used(l, mid, nritems - mid) +
data_size > BTRFS_LEAF_DATA_SIZE(root)) {
+ if (data_size && !tried_avoid_double)
+ goto push_for_double;
split = 2;
}
}
@@ -2918,6 +3021,8 @@
if (mid != nritems &&
leaf_space_used(l, mid, nritems - mid) +
data_size > BTRFS_LEAF_DATA_SIZE(root)) {
+ if (data_size && !tried_avoid_double)
+ goto push_for_double;
split = 2 ;
}
}
@@ -2932,10 +3037,10 @@
right = btrfs_alloc_free_block(trans, root, root->leafsize, 0,
root->root_key.objectid,
&disk_key, 0, l->start, 0);
- if (IS_ERR(right)) {
- BUG_ON(1);
+ if (IS_ERR(right))
return PTR_ERR(right);
- }
+
+ root_add_used(root, root->leafsize);
memset_extent_buffer(right, 0, 0, sizeof(struct btrfs_header));
btrfs_set_header_bytenr(right, right->start);
@@ -2998,6 +3103,13 @@
}
return ret;
+
+push_for_double:
+ push_for_double_split(trans, root, path, data_size);
+ tried_avoid_double = 1;
+ if (btrfs_leaf_free_space(root, path->nodes[0]) >= data_size)
+ return 0;
+ goto again;
}
static noinline int setup_leaf_for_split(struct btrfs_trans_handle *trans,
@@ -3054,7 +3166,8 @@
btrfs_set_path_blocking(path);
ret = split_leaf(trans, root, &key, path, ins_len, 1);
- BUG_ON(ret);
+ if (ret)
+ goto err;
path->keep_locks = 0;
btrfs_unlock_up_safe(path, 1);
@@ -3796,9 +3909,10 @@
*/
btrfs_unlock_up_safe(path, 0);
- ret = btrfs_free_tree_block(trans, root, leaf->start, leaf->len,
- 0, root->root_key.objectid, 0);
- return ret;
+ root_sub_used(root, leaf->len);
+
+ btrfs_free_tree_block(trans, root, leaf, 0, 1);
+ return 0;
}
/*
* delete the item at the leaf level in path. If that empties
@@ -3865,6 +3979,8 @@
if (leaf == root->node) {
btrfs_set_header_level(leaf, 0);
} else {
+ btrfs_set_path_blocking(path);
+ clean_tree_block(trans, root, leaf);
ret = btrfs_del_leaf(trans, root, path, leaf);
BUG_ON(ret);
}
@@ -3890,13 +4006,15 @@
extent_buffer_get(leaf);
btrfs_set_path_blocking(path);
- wret = push_leaf_left(trans, root, path, 1, 1);
+ wret = push_leaf_left(trans, root, path, 1, 1,
+ 1, (u32)-1);
if (wret < 0 && wret != -ENOSPC)
ret = wret;
if (path->nodes[0] == leaf &&
btrfs_header_nritems(leaf)) {
- wret = push_leaf_right(trans, root, path, 1, 1);
+ wret = push_leaf_right(trans, root, path, 1,
+ 1, 1, 0);
if (wret < 0 && wret != -ENOSPC)
ret = wret;
}
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 746a724..29c2009 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -34,6 +34,7 @@
struct btrfs_trans_handle;
struct btrfs_transaction;
+struct btrfs_pending_snapshot;
extern struct kmem_cache *btrfs_trans_handle_cachep;
extern struct kmem_cache *btrfs_transaction_cachep;
extern struct kmem_cache *btrfs_bit_radix_cachep;
@@ -663,6 +664,7 @@
#define BTRFS_BLOCK_GROUP_RAID1 (1 << 4)
#define BTRFS_BLOCK_GROUP_DUP (1 << 5)
#define BTRFS_BLOCK_GROUP_RAID10 (1 << 6)
+#define BTRFS_NR_RAID_TYPES 5
struct btrfs_block_group_item {
__le64 used;
@@ -674,42 +676,46 @@
u64 flags;
u64 total_bytes; /* total bytes in the space */
- u64 bytes_used; /* total bytes used on disk */
+ u64 bytes_used; /* total bytes used,
+ this does't take mirrors into account */
u64 bytes_pinned; /* total bytes pinned, will be freed when the
transaction finishes */
u64 bytes_reserved; /* total bytes the allocator has reserved for
current allocations */
u64 bytes_readonly; /* total bytes that are read only */
- u64 bytes_super; /* total bytes reserved for the super blocks */
- u64 bytes_root; /* the number of bytes needed to commit a
- transaction */
+
u64 bytes_may_use; /* number of bytes that may be used for
delalloc/allocations */
- u64 bytes_delalloc; /* number of bytes currently reserved for
- delayed allocation */
+ u64 disk_used; /* total bytes used on disk */
int full; /* indicates that we cannot allocate any more
chunks for this space */
int force_alloc; /* set if we need to force a chunk alloc for
this space */
- int force_delalloc; /* make people start doing filemap_flush until
- we're under a threshold */
struct list_head list;
- /* for controlling how we free up space for allocations */
- wait_queue_head_t allocate_wait;
- wait_queue_head_t flush_wait;
- int allocating_chunk;
- int flushing;
-
/* for block groups in our same type */
- struct list_head block_groups;
+ struct list_head block_groups[BTRFS_NR_RAID_TYPES];
spinlock_t lock;
struct rw_semaphore groups_sem;
atomic_t caching_threads;
};
+struct btrfs_block_rsv {
+ u64 size;
+ u64 reserved;
+ u64 freed[2];
+ struct btrfs_space_info *space_info;
+ struct list_head list;
+ spinlock_t lock;
+ atomic_t usage;
+ unsigned int priority:8;
+ unsigned int durable:1;
+ unsigned int refill_used:1;
+ unsigned int full:1;
+};
+
/*
* free clusters are used to claim free space in relatively large chunks,
* allowing us to do less seeky writes. They are used for all metadata
@@ -760,6 +766,7 @@
spinlock_t lock;
u64 pinned;
u64 reserved;
+ u64 reserved_pinned;
u64 bytes_super;
u64 flags;
u64 sectorsize;
@@ -825,6 +832,22 @@
/* logical->physical extent mapping */
struct btrfs_mapping_tree mapping_tree;
+ /* block reservation for extent, checksum and root tree */
+ struct btrfs_block_rsv global_block_rsv;
+ /* block reservation for delay allocation */
+ struct btrfs_block_rsv delalloc_block_rsv;
+ /* block reservation for metadata operations */
+ struct btrfs_block_rsv trans_block_rsv;
+ /* block reservation for chunk tree */
+ struct btrfs_block_rsv chunk_block_rsv;
+
+ struct btrfs_block_rsv empty_block_rsv;
+
+ /* list of block reservations that cross multiple transactions */
+ struct list_head durable_block_rsv_list;
+
+ struct mutex durable_block_rsv_mutex;
+
u64 generation;
u64 last_trans_committed;
@@ -927,7 +950,6 @@
struct btrfs_workers endio_meta_write_workers;
struct btrfs_workers endio_write_workers;
struct btrfs_workers submit_workers;
- struct btrfs_workers enospc_workers;
/*
* fixup workers take dirty pages that didn't properly go through
* the cow mechanism and make them safe to write. It happens
@@ -943,6 +965,7 @@
int do_barriers;
int closing;
int log_root_recovering;
+ int enospc_unlink;
u64 total_pinned;
@@ -1012,6 +1035,9 @@
struct completion kobj_unregister;
struct mutex objectid_mutex;
+ spinlock_t accounting_lock;
+ struct btrfs_block_rsv *block_rsv;
+
struct mutex log_mutex;
wait_queue_head_t log_writer_wait;
wait_queue_head_t log_commit_wait[2];
@@ -1043,7 +1069,6 @@
int ref_cows;
int track_dirty;
int in_radix;
- int clean_orphans;
u64 defrag_trans_start;
struct btrfs_key defrag_progress;
@@ -1057,8 +1082,11 @@
struct list_head root_list;
- spinlock_t list_lock;
+ spinlock_t orphan_lock;
struct list_head orphan_list;
+ struct btrfs_block_rsv *orphan_block_rsv;
+ int orphan_item_inserted;
+ int orphan_cleanup_state;
spinlock_t inode_lock;
/* red-black tree that keeps track of in-memory inodes */
@@ -1965,6 +1993,9 @@
int btrfs_run_delayed_refs(struct btrfs_trans_handle *trans,
struct btrfs_root *root, unsigned long count);
int btrfs_lookup_extent(struct btrfs_root *root, u64 start, u64 len);
+int btrfs_lookup_extent_info(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root, u64 bytenr,
+ u64 num_bytes, u64 *refs, u64 *flags);
int btrfs_pin_extent(struct btrfs_root *root,
u64 bytenr, u64 num, int reserved);
int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans,
@@ -1984,10 +2015,10 @@
u64 parent, u64 root_objectid,
struct btrfs_disk_key *key, int level,
u64 hint, u64 empty_size);
-int btrfs_free_tree_block(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- u64 bytenr, u32 blocksize,
- u64 parent, u64 root_objectid, int level);
+void btrfs_free_tree_block(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct extent_buffer *buf,
+ u64 parent, int last_ref);
struct extent_buffer *btrfs_init_new_buffer(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 bytenr, u32 blocksize,
@@ -2041,27 +2072,49 @@
u64 size);
int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
struct btrfs_root *root, u64 group_start);
-int btrfs_prepare_block_group_relocation(struct btrfs_root *root,
- struct btrfs_block_group_cache *group);
-
u64 btrfs_reduce_alloc_profile(struct btrfs_root *root, u64 flags);
void btrfs_set_inode_space_info(struct btrfs_root *root, struct inode *ionde);
void btrfs_clear_space_info_full(struct btrfs_fs_info *info);
-
-int btrfs_reserve_metadata_space(struct btrfs_root *root, int num_items);
-int btrfs_unreserve_metadata_space(struct btrfs_root *root, int num_items);
-int btrfs_unreserve_metadata_for_delalloc(struct btrfs_root *root,
- struct inode *inode, int num_items);
-int btrfs_reserve_metadata_for_delalloc(struct btrfs_root *root,
- struct inode *inode, int num_items);
-int btrfs_check_data_free_space(struct btrfs_root *root, struct inode *inode,
- u64 bytes);
-void btrfs_free_reserved_data_space(struct btrfs_root *root,
- struct inode *inode, u64 bytes);
-void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode,
- u64 bytes);
-void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode,
- u64 bytes);
+int btrfs_check_data_free_space(struct inode *inode, u64 bytes);
+void btrfs_free_reserved_data_space(struct inode *inode, u64 bytes);
+int btrfs_trans_reserve_metadata(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ int num_items, int *retries);
+void btrfs_trans_release_metadata(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root);
+int btrfs_orphan_reserve_metadata(struct btrfs_trans_handle *trans,
+ struct inode *inode);
+void btrfs_orphan_release_metadata(struct inode *inode);
+int btrfs_snap_reserve_metadata(struct btrfs_trans_handle *trans,
+ struct btrfs_pending_snapshot *pending);
+int btrfs_delalloc_reserve_metadata(struct inode *inode, u64 num_bytes);
+void btrfs_delalloc_release_metadata(struct inode *inode, u64 num_bytes);
+int btrfs_delalloc_reserve_space(struct inode *inode, u64 num_bytes);
+void btrfs_delalloc_release_space(struct inode *inode, u64 num_bytes);
+void btrfs_init_block_rsv(struct btrfs_block_rsv *rsv);
+struct btrfs_block_rsv *btrfs_alloc_block_rsv(struct btrfs_root *root);
+void btrfs_free_block_rsv(struct btrfs_root *root,
+ struct btrfs_block_rsv *rsv);
+void btrfs_add_durable_block_rsv(struct btrfs_fs_info *fs_info,
+ struct btrfs_block_rsv *rsv);
+int btrfs_block_rsv_add(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct btrfs_block_rsv *block_rsv,
+ u64 num_bytes, int *retries);
+int btrfs_block_rsv_check(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct btrfs_block_rsv *block_rsv,
+ u64 min_reserved, int min_factor);
+int btrfs_block_rsv_migrate(struct btrfs_block_rsv *src_rsv,
+ struct btrfs_block_rsv *dst_rsv,
+ u64 num_bytes);
+void btrfs_block_rsv_release(struct btrfs_root *root,
+ struct btrfs_block_rsv *block_rsv,
+ u64 num_bytes);
+int btrfs_set_block_group_ro(struct btrfs_root *root,
+ struct btrfs_block_group_cache *cache);
+int btrfs_set_block_group_rw(struct btrfs_root *root,
+ struct btrfs_block_group_cache *cache);
/* ctree.c */
int btrfs_bin_search(struct extent_buffer *eb, struct btrfs_key *key,
int level, int *slot);
@@ -2152,7 +2205,8 @@
int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path);
int btrfs_prev_leaf(struct btrfs_root *root, struct btrfs_path *path);
int btrfs_leaf_free_space(struct btrfs_root *root, struct extent_buffer *leaf);
-int btrfs_drop_snapshot(struct btrfs_root *root, int update_ref);
+int btrfs_drop_snapshot(struct btrfs_root *root,
+ struct btrfs_block_rsv *block_rsv, int update_ref);
int btrfs_drop_subtree(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct extent_buffer *node,
@@ -2245,6 +2299,12 @@
struct btrfs_root *root,
const char *name, int name_len,
u64 inode_objectid, u64 ref_objectid, u64 *index);
+struct btrfs_inode_ref *
+btrfs_lookup_inode_ref(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct btrfs_path *path,
+ const char *name, int name_len,
+ u64 inode_objectid, u64 ref_objectid, int mod);
int btrfs_insert_empty_inode(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path, u64 objectid);
@@ -2257,6 +2317,8 @@
struct btrfs_root *root, u64 bytenr, u64 len);
int btrfs_lookup_bio_sums(struct btrfs_root *root, struct inode *inode,
struct bio *bio, u32 *dst);
+int btrfs_lookup_bio_sums_dio(struct btrfs_root *root, struct inode *inode,
+ struct bio *bio, u64 logical_offset, u32 *dst);
int btrfs_insert_file_extent(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 objectid, u64 pos,
@@ -2311,6 +2373,7 @@
u32 min_type);
int btrfs_start_delalloc_inodes(struct btrfs_root *root, int delay_iput);
+int btrfs_start_one_delalloc_inode(struct btrfs_root *root, int delay_iput);
int btrfs_set_extent_delalloc(struct inode *inode, u64 start, u64 end,
struct extent_state **cached_state);
int btrfs_writepages(struct address_space *mapping,
@@ -2349,10 +2412,20 @@
int btrfs_orphan_add(struct btrfs_trans_handle *trans, struct inode *inode);
int btrfs_orphan_del(struct btrfs_trans_handle *trans, struct inode *inode);
void btrfs_orphan_cleanup(struct btrfs_root *root);
+void btrfs_orphan_pre_snapshot(struct btrfs_trans_handle *trans,
+ struct btrfs_pending_snapshot *pending,
+ u64 *bytes_to_reserve);
+void btrfs_orphan_post_snapshot(struct btrfs_trans_handle *trans,
+ struct btrfs_pending_snapshot *pending);
+void btrfs_orphan_commit_root(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root);
int btrfs_cont_expand(struct inode *inode, loff_t size);
int btrfs_invalidate_inodes(struct btrfs_root *root);
void btrfs_add_delayed_iput(struct inode *inode);
void btrfs_run_delayed_iputs(struct btrfs_root *root);
+int btrfs_prealloc_file_range(struct inode *inode, int mode,
+ u64 start, u64 num_bytes, u64 min_size,
+ loff_t actual_len, u64 *alloc_hint);
extern const struct dentry_operations btrfs_dentry_operations;
/* ioctl.c */
@@ -2361,7 +2434,7 @@
void btrfs_inherit_iflags(struct inode *inode, struct inode *dir);
/* file.c */
-int btrfs_sync_file(struct file *file, struct dentry *dentry, int datasync);
+int btrfs_sync_file(struct file *file, int datasync);
int btrfs_drop_extent_cache(struct inode *inode, u64 start, u64 end,
int skip_pinned);
int btrfs_check_file(struct btrfs_root *root, struct inode *inode);
@@ -2409,4 +2482,12 @@
struct btrfs_root *root);
int btrfs_recover_relocation(struct btrfs_root *root);
int btrfs_reloc_clone_csums(struct inode *inode, u64 file_pos, u64 len);
+void btrfs_reloc_cow_block(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root, struct extent_buffer *buf,
+ struct extent_buffer *cow);
+void btrfs_reloc_pre_snapshot(struct btrfs_trans_handle *trans,
+ struct btrfs_pending_snapshot *pending,
+ u64 *bytes_to_reserve);
+void btrfs_reloc_post_snapshot(struct btrfs_trans_handle *trans,
+ struct btrfs_pending_snapshot *pending);
#endif
diff --git a/fs/btrfs/delayed-ref.c b/fs/btrfs/delayed-ref.c
index 902ce50..e807b14 100644
--- a/fs/btrfs/delayed-ref.c
+++ b/fs/btrfs/delayed-ref.c
@@ -319,107 +319,6 @@
}
/*
- * helper function to lookup reference count and flags of extent.
- *
- * the head node for delayed ref is used to store the sum of all the
- * reference count modifications queued up in the rbtree. the head
- * node may also store the extent flags to set. This way you can check
- * to see what the reference count and extent flags would be if all of
- * the delayed refs are not processed.
- */
-int btrfs_lookup_extent_info(struct btrfs_trans_handle *trans,
- struct btrfs_root *root, u64 bytenr,
- u64 num_bytes, u64 *refs, u64 *flags)
-{
- struct btrfs_delayed_ref_node *ref;
- struct btrfs_delayed_ref_head *head;
- struct btrfs_delayed_ref_root *delayed_refs;
- struct btrfs_path *path;
- struct btrfs_extent_item *ei;
- struct extent_buffer *leaf;
- struct btrfs_key key;
- u32 item_size;
- u64 num_refs;
- u64 extent_flags;
- int ret;
-
- path = btrfs_alloc_path();
- if (!path)
- return -ENOMEM;
-
- key.objectid = bytenr;
- key.type = BTRFS_EXTENT_ITEM_KEY;
- key.offset = num_bytes;
- delayed_refs = &trans->transaction->delayed_refs;
-again:
- ret = btrfs_search_slot(trans, root->fs_info->extent_root,
- &key, path, 0, 0);
- if (ret < 0)
- goto out;
-
- if (ret == 0) {
- leaf = path->nodes[0];
- item_size = btrfs_item_size_nr(leaf, path->slots[0]);
- if (item_size >= sizeof(*ei)) {
- ei = btrfs_item_ptr(leaf, path->slots[0],
- struct btrfs_extent_item);
- num_refs = btrfs_extent_refs(leaf, ei);
- extent_flags = btrfs_extent_flags(leaf, ei);
- } else {
-#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
- struct btrfs_extent_item_v0 *ei0;
- BUG_ON(item_size != sizeof(*ei0));
- ei0 = btrfs_item_ptr(leaf, path->slots[0],
- struct btrfs_extent_item_v0);
- num_refs = btrfs_extent_refs_v0(leaf, ei0);
- /* FIXME: this isn't correct for data */
- extent_flags = BTRFS_BLOCK_FLAG_FULL_BACKREF;
-#else
- BUG();
-#endif
- }
- BUG_ON(num_refs == 0);
- } else {
- num_refs = 0;
- extent_flags = 0;
- ret = 0;
- }
-
- spin_lock(&delayed_refs->lock);
- ref = find_ref_head(&delayed_refs->root, bytenr, NULL);
- if (ref) {
- head = btrfs_delayed_node_to_head(ref);
- if (!mutex_trylock(&head->mutex)) {
- atomic_inc(&ref->refs);
- spin_unlock(&delayed_refs->lock);
-
- btrfs_release_path(root->fs_info->extent_root, path);
-
- mutex_lock(&head->mutex);
- mutex_unlock(&head->mutex);
- btrfs_put_delayed_ref(ref);
- goto again;
- }
- if (head->extent_op && head->extent_op->update_flags)
- extent_flags |= head->extent_op->flags_to_set;
- else
- BUG_ON(num_refs == 0);
-
- num_refs += ref->ref_mod;
- mutex_unlock(&head->mutex);
- }
- WARN_ON(num_refs == 0);
- if (refs)
- *refs = num_refs;
- if (flags)
- *flags = extent_flags;
-out:
- spin_unlock(&delayed_refs->lock);
- btrfs_free_path(path);
- return ret;
-}
-
-/*
* helper function to update an extent delayed ref in the
* rbtree. existing and update must both have the same
* bytenr and parent
diff --git a/fs/btrfs/delayed-ref.h b/fs/btrfs/delayed-ref.h
index f6fc67d..50e3cf9 100644
--- a/fs/btrfs/delayed-ref.h
+++ b/fs/btrfs/delayed-ref.h
@@ -167,9 +167,6 @@
struct btrfs_delayed_ref_head *
btrfs_find_delayed_ref_head(struct btrfs_trans_handle *trans, u64 bytenr);
int btrfs_delayed_ref_pending(struct btrfs_trans_handle *trans, u64 bytenr);
-int btrfs_lookup_extent_info(struct btrfs_trans_handle *trans,
- struct btrfs_root *root, u64 bytenr,
- u64 num_bytes, u64 *refs, u64 *flags);
int btrfs_update_delayed_ref(struct btrfs_trans_handle *trans,
u64 bytenr, u64 num_bytes, u64 orig_parent,
u64 parent, u64 orig_ref_root, u64 ref_root,
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index feca041..34f7c37 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -74,6 +74,11 @@
int rw;
int mirror_num;
unsigned long bio_flags;
+ /*
+ * bio_offset is optional, can be used if the pages in the bio
+ * can't tell us where in the file the bio should go
+ */
+ u64 bio_offset;
struct btrfs_work work;
};
@@ -534,7 +539,8 @@
async = container_of(work, struct async_submit_bio, work);
fs_info = BTRFS_I(async->inode)->root->fs_info;
async->submit_bio_start(async->inode, async->rw, async->bio,
- async->mirror_num, async->bio_flags);
+ async->mirror_num, async->bio_flags,
+ async->bio_offset);
}
static void run_one_async_done(struct btrfs_work *work)
@@ -556,7 +562,8 @@
wake_up(&fs_info->async_submit_wait);
async->submit_bio_done(async->inode, async->rw, async->bio,
- async->mirror_num, async->bio_flags);
+ async->mirror_num, async->bio_flags,
+ async->bio_offset);
}
static void run_one_async_free(struct btrfs_work *work)
@@ -570,6 +577,7 @@
int btrfs_wq_submit_bio(struct btrfs_fs_info *fs_info, struct inode *inode,
int rw, struct bio *bio, int mirror_num,
unsigned long bio_flags,
+ u64 bio_offset,
extent_submit_bio_hook_t *submit_bio_start,
extent_submit_bio_hook_t *submit_bio_done)
{
@@ -592,6 +600,7 @@
async->work.flags = 0;
async->bio_flags = bio_flags;
+ async->bio_offset = bio_offset;
atomic_inc(&fs_info->nr_async_submits);
@@ -627,7 +636,8 @@
static int __btree_submit_bio_start(struct inode *inode, int rw,
struct bio *bio, int mirror_num,
- unsigned long bio_flags)
+ unsigned long bio_flags,
+ u64 bio_offset)
{
/*
* when we're called for a write, we're already in the async
@@ -638,7 +648,8 @@
}
static int __btree_submit_bio_done(struct inode *inode, int rw, struct bio *bio,
- int mirror_num, unsigned long bio_flags)
+ int mirror_num, unsigned long bio_flags,
+ u64 bio_offset)
{
/*
* when we're called for a write, we're already in the async
@@ -648,7 +659,8 @@
}
static int btree_submit_bio_hook(struct inode *inode, int rw, struct bio *bio,
- int mirror_num, unsigned long bio_flags)
+ int mirror_num, unsigned long bio_flags,
+ u64 bio_offset)
{
int ret;
@@ -671,6 +683,7 @@
*/
return btrfs_wq_submit_bio(BTRFS_I(inode)->root->fs_info,
inode, rw, bio, mirror_num, 0,
+ bio_offset,
__btree_submit_bio_start,
__btree_submit_bio_done);
}
@@ -894,7 +907,8 @@
root->ref_cows = 0;
root->track_dirty = 0;
root->in_radix = 0;
- root->clean_orphans = 0;
+ root->orphan_item_inserted = 0;
+ root->orphan_cleanup_state = 0;
root->fs_info = fs_info;
root->objectid = objectid;
@@ -903,13 +917,16 @@
root->name = NULL;
root->in_sysfs = 0;
root->inode_tree = RB_ROOT;
+ root->block_rsv = NULL;
+ root->orphan_block_rsv = NULL;
INIT_LIST_HEAD(&root->dirty_list);
INIT_LIST_HEAD(&root->orphan_list);
INIT_LIST_HEAD(&root->root_list);
spin_lock_init(&root->node_lock);
- spin_lock_init(&root->list_lock);
+ spin_lock_init(&root->orphan_lock);
spin_lock_init(&root->inode_lock);
+ spin_lock_init(&root->accounting_lock);
mutex_init(&root->objectid_mutex);
mutex_init(&root->log_mutex);
init_waitqueue_head(&root->log_writer_wait);
@@ -968,42 +985,6 @@
return 0;
}
-int btrfs_free_log_root_tree(struct btrfs_trans_handle *trans,
- struct btrfs_fs_info *fs_info)
-{
- struct extent_buffer *eb;
- struct btrfs_root *log_root_tree = fs_info->log_root_tree;
- u64 start = 0;
- u64 end = 0;
- int ret;
-
- if (!log_root_tree)
- return 0;
-
- while (1) {
- ret = find_first_extent_bit(&log_root_tree->dirty_log_pages,
- 0, &start, &end, EXTENT_DIRTY | EXTENT_NEW);
- if (ret)
- break;
-
- clear_extent_bits(&log_root_tree->dirty_log_pages, start, end,
- EXTENT_DIRTY | EXTENT_NEW, GFP_NOFS);
- }
- eb = fs_info->log_root_tree->node;
-
- WARN_ON(btrfs_header_level(eb) != 0);
- WARN_ON(btrfs_header_nritems(eb) != 0);
-
- ret = btrfs_free_reserved_extent(fs_info->tree_root,
- eb->start, eb->len);
- BUG_ON(ret);
-
- free_extent_buffer(eb);
- kfree(fs_info->log_root_tree);
- fs_info->log_root_tree = NULL;
- return 0;
-}
-
static struct btrfs_root *alloc_log_tree(struct btrfs_trans_handle *trans,
struct btrfs_fs_info *fs_info)
{
@@ -1191,19 +1172,23 @@
if (root)
return root;
- ret = btrfs_find_orphan_item(fs_info->tree_root, location->objectid);
- if (ret == 0)
- ret = -ENOENT;
- if (ret < 0)
- return ERR_PTR(ret);
-
root = btrfs_read_fs_root_no_radix(fs_info->tree_root, location);
if (IS_ERR(root))
return root;
- WARN_ON(btrfs_root_refs(&root->root_item) == 0);
set_anon_super(&root->anon_super, NULL);
+ if (btrfs_root_refs(&root->root_item) == 0) {
+ ret = -ENOENT;
+ goto fail;
+ }
+
+ ret = btrfs_find_orphan_item(fs_info->tree_root, location->objectid);
+ if (ret < 0)
+ goto fail;
+ if (ret == 0)
+ root->orphan_item_inserted = 1;
+
ret = radix_tree_preload(GFP_NOFS & ~__GFP_HIGHMEM);
if (ret)
goto fail;
@@ -1212,10 +1197,9 @@
ret = radix_tree_insert(&fs_info->fs_roots_radix,
(unsigned long)root->root_key.objectid,
root);
- if (ret == 0) {
+ if (ret == 0)
root->in_radix = 1;
- root->clean_orphans = 1;
- }
+
spin_unlock(&fs_info->fs_roots_radix_lock);
radix_tree_preload_end();
if (ret) {
@@ -1461,10 +1445,6 @@
struct btrfs_root *root = arg;
do {
- smp_mb();
- if (root->fs_info->closing)
- break;
-
vfs_check_frozen(root->fs_info->sb, SB_FREEZE_WRITE);
if (!(root->fs_info->sb->s_flags & MS_RDONLY) &&
@@ -1477,11 +1457,9 @@
if (freezing(current)) {
refrigerator();
} else {
- smp_mb();
- if (root->fs_info->closing)
- break;
set_current_state(TASK_INTERRUPTIBLE);
- schedule();
+ if (!kthread_should_stop())
+ schedule();
__set_current_state(TASK_RUNNING);
}
} while (!kthread_should_stop());
@@ -1493,36 +1471,40 @@
struct btrfs_root *root = arg;
struct btrfs_trans_handle *trans;
struct btrfs_transaction *cur;
+ u64 transid;
unsigned long now;
unsigned long delay;
int ret;
do {
- smp_mb();
- if (root->fs_info->closing)
- break;
-
delay = HZ * 30;
vfs_check_frozen(root->fs_info->sb, SB_FREEZE_WRITE);
mutex_lock(&root->fs_info->transaction_kthread_mutex);
- mutex_lock(&root->fs_info->trans_mutex);
+ spin_lock(&root->fs_info->new_trans_lock);
cur = root->fs_info->running_transaction;
if (!cur) {
- mutex_unlock(&root->fs_info->trans_mutex);
+ spin_unlock(&root->fs_info->new_trans_lock);
goto sleep;
}
now = get_seconds();
- if (now < cur->start_time || now - cur->start_time < 30) {
- mutex_unlock(&root->fs_info->trans_mutex);
+ if (!cur->blocked &&
+ (now < cur->start_time || now - cur->start_time < 30)) {
+ spin_unlock(&root->fs_info->new_trans_lock);
delay = HZ * 5;
goto sleep;
}
- mutex_unlock(&root->fs_info->trans_mutex);
- trans = btrfs_start_transaction(root, 1);
- ret = btrfs_commit_transaction(trans, root);
+ transid = cur->transid;
+ spin_unlock(&root->fs_info->new_trans_lock);
+ trans = btrfs_join_transaction(root, 1);
+ if (transid == trans->transid) {
+ ret = btrfs_commit_transaction(trans, root);
+ BUG_ON(ret);
+ } else {
+ btrfs_end_transaction(trans, root);
+ }
sleep:
wake_up_process(root->fs_info->cleaner_kthread);
mutex_unlock(&root->fs_info->transaction_kthread_mutex);
@@ -1530,10 +1512,10 @@
if (freezing(current)) {
refrigerator();
} else {
- if (root->fs_info->closing)
- break;
set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(delay);
+ if (!kthread_should_stop() &&
+ !btrfs_transaction_blocked(root->fs_info))
+ schedule_timeout(delay);
__set_current_state(TASK_RUNNING);
}
} while (!kthread_should_stop());
@@ -1620,6 +1602,13 @@
INIT_LIST_HEAD(&fs_info->dirty_cowonly_roots);
INIT_LIST_HEAD(&fs_info->space_info);
btrfs_mapping_init(&fs_info->mapping_tree);
+ btrfs_init_block_rsv(&fs_info->global_block_rsv);
+ btrfs_init_block_rsv(&fs_info->delalloc_block_rsv);
+ btrfs_init_block_rsv(&fs_info->trans_block_rsv);
+ btrfs_init_block_rsv(&fs_info->chunk_block_rsv);
+ btrfs_init_block_rsv(&fs_info->empty_block_rsv);
+ INIT_LIST_HEAD(&fs_info->durable_block_rsv_list);
+ mutex_init(&fs_info->durable_block_rsv_mutex);
atomic_set(&fs_info->nr_async_submits, 0);
atomic_set(&fs_info->async_delalloc_pages, 0);
atomic_set(&fs_info->async_submit_draining, 0);
@@ -1759,9 +1748,6 @@
min_t(u64, fs_devices->num_devices,
fs_info->thread_pool_size),
&fs_info->generic_worker);
- btrfs_init_workers(&fs_info->enospc_workers, "enospc",
- fs_info->thread_pool_size,
- &fs_info->generic_worker);
/* a higher idle thresh on the submit workers makes it much more
* likely that bios will be send down in a sane order to the
@@ -1809,7 +1795,6 @@
btrfs_start_workers(&fs_info->endio_meta_workers, 1);
btrfs_start_workers(&fs_info->endio_meta_write_workers, 1);
btrfs_start_workers(&fs_info->endio_write_workers, 1);
- btrfs_start_workers(&fs_info->enospc_workers, 1);
fs_info->bdi.ra_pages *= btrfs_super_num_devices(disk_super);
fs_info->bdi.ra_pages = max(fs_info->bdi.ra_pages,
@@ -1912,17 +1897,18 @@
csum_root->track_dirty = 1;
+ fs_info->generation = generation;
+ fs_info->last_trans_committed = generation;
+ fs_info->data_alloc_profile = (u64)-1;
+ fs_info->metadata_alloc_profile = (u64)-1;
+ fs_info->system_alloc_profile = fs_info->metadata_alloc_profile;
+
ret = btrfs_read_block_groups(extent_root);
if (ret) {
printk(KERN_ERR "Failed to read block groups: %d\n", ret);
goto fail_block_groups;
}
- fs_info->generation = generation;
- fs_info->last_trans_committed = generation;
- fs_info->data_alloc_profile = (u64)-1;
- fs_info->metadata_alloc_profile = (u64)-1;
- fs_info->system_alloc_profile = fs_info->metadata_alloc_profile;
fs_info->cleaner_kthread = kthread_run(cleaner_kthread, tree_root,
"btrfs-cleaner");
if (IS_ERR(fs_info->cleaner_kthread))
@@ -1955,8 +1941,11 @@
btrfs_level_size(tree_root,
btrfs_super_log_root_level(disk_super));
- log_tree_root = kzalloc(sizeof(struct btrfs_root),
- GFP_NOFS);
+ log_tree_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+ if (!log_tree_root) {
+ err = -ENOMEM;
+ goto fail_trans_kthread;
+ }
__setup_root(nodesize, leafsize, sectorsize, stripesize,
log_tree_root, fs_info, BTRFS_TREE_LOG_OBJECTID);
@@ -1977,6 +1966,9 @@
BUG_ON(ret);
if (!(sb->s_flags & MS_RDONLY)) {
+ ret = btrfs_cleanup_fs_roots(fs_info);
+ BUG_ON(ret);
+
ret = btrfs_recover_relocation(tree_root);
if (ret < 0) {
printk(KERN_WARNING
@@ -1993,6 +1985,10 @@
fs_info->fs_root = btrfs_read_fs_root_no_name(fs_info, &location);
if (!fs_info->fs_root)
goto fail_trans_kthread;
+ if (IS_ERR(fs_info->fs_root)) {
+ err = PTR_ERR(fs_info->fs_root);
+ goto fail_trans_kthread;
+ }
if (!(sb->s_flags & MS_RDONLY)) {
down_read(&fs_info->cleanup_work_sem);
@@ -2040,7 +2036,6 @@
btrfs_stop_workers(&fs_info->endio_meta_write_workers);
btrfs_stop_workers(&fs_info->endio_write_workers);
btrfs_stop_workers(&fs_info->submit_workers);
- btrfs_stop_workers(&fs_info->enospc_workers);
fail_iput:
invalidate_inode_pages2(fs_info->btree_inode->i_mapping);
iput(fs_info->btree_inode);
@@ -2405,11 +2400,11 @@
down_write(&root->fs_info->cleanup_work_sem);
up_write(&root->fs_info->cleanup_work_sem);
- trans = btrfs_start_transaction(root, 1);
+ trans = btrfs_join_transaction(root, 1);
ret = btrfs_commit_transaction(trans, root);
BUG_ON(ret);
/* run commit again to drop the original snapshot */
- trans = btrfs_start_transaction(root, 1);
+ trans = btrfs_join_transaction(root, 1);
btrfs_commit_transaction(trans, root);
ret = btrfs_write_and_wait_transaction(NULL, root);
BUG_ON(ret);
@@ -2426,15 +2421,15 @@
fs_info->closing = 1;
smp_mb();
- kthread_stop(root->fs_info->transaction_kthread);
- kthread_stop(root->fs_info->cleaner_kthread);
-
if (!(fs_info->sb->s_flags & MS_RDONLY)) {
ret = btrfs_commit_super(root);
if (ret)
printk(KERN_ERR "btrfs: commit super ret %d\n", ret);
}
+ kthread_stop(root->fs_info->transaction_kthread);
+ kthread_stop(root->fs_info->cleaner_kthread);
+
fs_info->closing = 2;
smp_mb();
@@ -2473,7 +2468,6 @@
btrfs_stop_workers(&fs_info->endio_meta_write_workers);
btrfs_stop_workers(&fs_info->endio_write_workers);
btrfs_stop_workers(&fs_info->submit_workers);
- btrfs_stop_workers(&fs_info->enospc_workers);
btrfs_close_devices(fs_info->fs_devices);
btrfs_mapping_tree_free(&fs_info->mapping_tree);
diff --git a/fs/btrfs/disk-io.h b/fs/btrfs/disk-io.h
index c958ecb..88e825a 100644
--- a/fs/btrfs/disk-io.h
+++ b/fs/btrfs/disk-io.h
@@ -87,7 +87,7 @@
int metadata);
int btrfs_wq_submit_bio(struct btrfs_fs_info *fs_info, struct inode *inode,
int rw, struct bio *bio, int mirror_num,
- unsigned long bio_flags,
+ unsigned long bio_flags, u64 bio_offset,
extent_submit_bio_hook_t *submit_bio_start,
extent_submit_bio_hook_t *submit_bio_done);
@@ -95,8 +95,6 @@
unsigned long btrfs_async_submit_limit(struct btrfs_fs_info *info);
int btrfs_write_tree_block(struct extent_buffer *buf);
int btrfs_wait_tree_block_writeback(struct extent_buffer *buf);
-int btrfs_free_log_root_tree(struct btrfs_trans_handle *trans,
- struct btrfs_fs_info *fs_info);
int btrfs_init_log_root_tree(struct btrfs_trans_handle *trans,
struct btrfs_fs_info *fs_info);
int btrfs_add_log_tree(struct btrfs_trans_handle *trans,
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index c6a4f45..32d0940 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -35,10 +35,9 @@
static int update_block_group(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
- u64 bytenr, u64 num_bytes, int alloc,
- int mark_free);
-static int update_reserved_extents(struct btrfs_block_group_cache *cache,
- u64 num_bytes, int reserve);
+ u64 bytenr, u64 num_bytes, int alloc);
+static int update_reserved_bytes(struct btrfs_block_group_cache *cache,
+ u64 num_bytes, int reserve, int sinfo);
static int __btrfs_free_extent(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 bytenr, u64 num_bytes, u64 parent,
@@ -61,12 +60,6 @@
static int do_chunk_alloc(struct btrfs_trans_handle *trans,
struct btrfs_root *extent_root, u64 alloc_bytes,
u64 flags, int force);
-static int pin_down_bytes(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- struct btrfs_path *path,
- u64 bytenr, u64 num_bytes,
- int is_data, int reserved,
- struct extent_buffer **must_clean);
static int find_next_key(struct btrfs_path *path, int level,
struct btrfs_key *key);
static void dump_space_info(struct btrfs_space_info *info, u64 bytes,
@@ -91,8 +84,12 @@
void btrfs_put_block_group(struct btrfs_block_group_cache *cache)
{
- if (atomic_dec_and_test(&cache->count))
+ if (atomic_dec_and_test(&cache->count)) {
+ WARN_ON(cache->pinned > 0);
+ WARN_ON(cache->reserved > 0);
+ WARN_ON(cache->reserved_pinned > 0);
kfree(cache);
+ }
}
/*
@@ -319,7 +316,7 @@
exclude_super_stripes(extent_root, block_group);
spin_lock(&block_group->space_info->lock);
- block_group->space_info->bytes_super += block_group->bytes_super;
+ block_group->space_info->bytes_readonly += block_group->bytes_super;
spin_unlock(&block_group->space_info->lock);
last = max_t(u64, block_group->key.objectid, BTRFS_SUPER_INFO_OFFSET);
@@ -507,6 +504,9 @@
struct list_head *head = &info->space_info;
struct btrfs_space_info *found;
+ flags &= BTRFS_BLOCK_GROUP_DATA | BTRFS_BLOCK_GROUP_SYSTEM |
+ BTRFS_BLOCK_GROUP_METADATA;
+
rcu_read_lock();
list_for_each_entry_rcu(found, head, list) {
if (found->flags == flags) {
@@ -610,6 +610,113 @@
}
/*
+ * helper function to lookup reference count and flags of extent.
+ *
+ * the head node for delayed ref is used to store the sum of all the
+ * reference count modifications queued up in the rbtree. the head
+ * node may also store the extent flags to set. This way you can check
+ * to see what the reference count and extent flags would be if all of
+ * the delayed refs are not processed.
+ */
+int btrfs_lookup_extent_info(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root, u64 bytenr,
+ u64 num_bytes, u64 *refs, u64 *flags)
+{
+ struct btrfs_delayed_ref_head *head;
+ struct btrfs_delayed_ref_root *delayed_refs;
+ struct btrfs_path *path;
+ struct btrfs_extent_item *ei;
+ struct extent_buffer *leaf;
+ struct btrfs_key key;
+ u32 item_size;
+ u64 num_refs;
+ u64 extent_flags;
+ int ret;
+
+ path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
+
+ key.objectid = bytenr;
+ key.type = BTRFS_EXTENT_ITEM_KEY;
+ key.offset = num_bytes;
+ if (!trans) {
+ path->skip_locking = 1;
+ path->search_commit_root = 1;
+ }
+again:
+ ret = btrfs_search_slot(trans, root->fs_info->extent_root,
+ &key, path, 0, 0);
+ if (ret < 0)
+ goto out_free;
+
+ if (ret == 0) {
+ leaf = path->nodes[0];
+ item_size = btrfs_item_size_nr(leaf, path->slots[0]);
+ if (item_size >= sizeof(*ei)) {
+ ei = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_extent_item);
+ num_refs = btrfs_extent_refs(leaf, ei);
+ extent_flags = btrfs_extent_flags(leaf, ei);
+ } else {
+#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
+ struct btrfs_extent_item_v0 *ei0;
+ BUG_ON(item_size != sizeof(*ei0));
+ ei0 = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_extent_item_v0);
+ num_refs = btrfs_extent_refs_v0(leaf, ei0);
+ /* FIXME: this isn't correct for data */
+ extent_flags = BTRFS_BLOCK_FLAG_FULL_BACKREF;
+#else
+ BUG();
+#endif
+ }
+ BUG_ON(num_refs == 0);
+ } else {
+ num_refs = 0;
+ extent_flags = 0;
+ ret = 0;
+ }
+
+ if (!trans)
+ goto out;
+
+ delayed_refs = &trans->transaction->delayed_refs;
+ spin_lock(&delayed_refs->lock);
+ head = btrfs_find_delayed_ref_head(trans, bytenr);
+ if (head) {
+ if (!mutex_trylock(&head->mutex)) {
+ atomic_inc(&head->node.refs);
+ spin_unlock(&delayed_refs->lock);
+
+ btrfs_release_path(root->fs_info->extent_root, path);
+
+ mutex_lock(&head->mutex);
+ mutex_unlock(&head->mutex);
+ btrfs_put_delayed_ref(&head->node);
+ goto again;
+ }
+ if (head->extent_op && head->extent_op->update_flags)
+ extent_flags |= head->extent_op->flags_to_set;
+ else
+ BUG_ON(num_refs == 0);
+
+ num_refs += head->node.ref_mod;
+ mutex_unlock(&head->mutex);
+ }
+ spin_unlock(&delayed_refs->lock);
+out:
+ WARN_ON(num_refs == 0);
+ if (refs)
+ *refs = num_refs;
+ if (flags)
+ *flags = extent_flags;
+out_free:
+ btrfs_free_path(path);
+ return ret;
+}
+
+/*
* Back reference rules. Back refs have three main goals:
*
* 1) differentiate between all holders of references to an extent so that
@@ -1871,7 +1978,6 @@
return ret;
}
-
/* helper function to actually process a single delayed ref entry */
static int run_one_delayed_ref(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
@@ -1891,32 +1997,14 @@
BUG_ON(extent_op);
head = btrfs_delayed_node_to_head(node);
if (insert_reserved) {
- int mark_free = 0;
- struct extent_buffer *must_clean = NULL;
-
- ret = pin_down_bytes(trans, root, NULL,
- node->bytenr, node->num_bytes,
- head->is_data, 1, &must_clean);
- if (ret > 0)
- mark_free = 1;
-
- if (must_clean) {
- clean_tree_block(NULL, root, must_clean);
- btrfs_tree_unlock(must_clean);
- free_extent_buffer(must_clean);
- }
+ btrfs_pin_extent(root, node->bytenr,
+ node->num_bytes, 1);
if (head->is_data) {
ret = btrfs_del_csums(trans, root,
node->bytenr,
node->num_bytes);
BUG_ON(ret);
}
- if (mark_free) {
- ret = btrfs_free_reserved_extent(root,
- node->bytenr,
- node->num_bytes);
- BUG_ON(ret);
- }
}
mutex_unlock(&head->mutex);
return 0;
@@ -2347,6 +2435,8 @@
ret = 0;
out:
btrfs_free_path(path);
+ if (root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID)
+ WARN_ON(ret > 0);
return ret;
}
@@ -2660,12 +2750,21 @@
struct btrfs_space_info **space_info)
{
struct btrfs_space_info *found;
+ int i;
+ int factor;
+
+ if (flags & (BTRFS_BLOCK_GROUP_DUP | BTRFS_BLOCK_GROUP_RAID1 |
+ BTRFS_BLOCK_GROUP_RAID10))
+ factor = 2;
+ else
+ factor = 1;
found = __find_space_info(info, flags);
if (found) {
spin_lock(&found->lock);
found->total_bytes += total_bytes;
found->bytes_used += bytes_used;
+ found->disk_used += bytes_used * factor;
found->full = 0;
spin_unlock(&found->lock);
*space_info = found;
@@ -2675,18 +2774,20 @@
if (!found)
return -ENOMEM;
- INIT_LIST_HEAD(&found->block_groups);
+ for (i = 0; i < BTRFS_NR_RAID_TYPES; i++)
+ INIT_LIST_HEAD(&found->block_groups[i]);
init_rwsem(&found->groups_sem);
- init_waitqueue_head(&found->flush_wait);
- init_waitqueue_head(&found->allocate_wait);
spin_lock_init(&found->lock);
- found->flags = flags;
+ found->flags = flags & (BTRFS_BLOCK_GROUP_DATA |
+ BTRFS_BLOCK_GROUP_SYSTEM |
+ BTRFS_BLOCK_GROUP_METADATA);
found->total_bytes = total_bytes;
found->bytes_used = bytes_used;
+ found->disk_used = bytes_used * factor;
found->bytes_pinned = 0;
found->bytes_reserved = 0;
found->bytes_readonly = 0;
- found->bytes_delalloc = 0;
+ found->bytes_may_use = 0;
found->full = 0;
found->force_alloc = 0;
*space_info = found;
@@ -2711,19 +2812,6 @@
}
}
-static void set_block_group_readonly(struct btrfs_block_group_cache *cache)
-{
- spin_lock(&cache->space_info->lock);
- spin_lock(&cache->lock);
- if (!cache->ro) {
- cache->space_info->bytes_readonly += cache->key.offset -
- btrfs_block_group_used(&cache->item);
- cache->ro = 1;
- }
- spin_unlock(&cache->lock);
- spin_unlock(&cache->space_info->lock);
-}
-
u64 btrfs_reduce_alloc_profile(struct btrfs_root *root, u64 flags)
{
u64 num_devices = root->fs_info->fs_devices->rw_devices;
@@ -2752,491 +2840,50 @@
return flags;
}
-static u64 btrfs_get_alloc_profile(struct btrfs_root *root, u64 data)
+static u64 get_alloc_profile(struct btrfs_root *root, u64 flags)
{
- struct btrfs_fs_info *info = root->fs_info;
- u64 alloc_profile;
+ if (flags & BTRFS_BLOCK_GROUP_DATA)
+ flags |= root->fs_info->avail_data_alloc_bits &
+ root->fs_info->data_alloc_profile;
+ else if (flags & BTRFS_BLOCK_GROUP_SYSTEM)
+ flags |= root->fs_info->avail_system_alloc_bits &
+ root->fs_info->system_alloc_profile;
+ else if (flags & BTRFS_BLOCK_GROUP_METADATA)
+ flags |= root->fs_info->avail_metadata_alloc_bits &
+ root->fs_info->metadata_alloc_profile;
+ return btrfs_reduce_alloc_profile(root, flags);
+}
- if (data) {
- alloc_profile = info->avail_data_alloc_bits &
- info->data_alloc_profile;
- data = BTRFS_BLOCK_GROUP_DATA | alloc_profile;
- } else if (root == root->fs_info->chunk_root) {
- alloc_profile = info->avail_system_alloc_bits &
- info->system_alloc_profile;
- data = BTRFS_BLOCK_GROUP_SYSTEM | alloc_profile;
- } else {
- alloc_profile = info->avail_metadata_alloc_bits &
- info->metadata_alloc_profile;
- data = BTRFS_BLOCK_GROUP_METADATA | alloc_profile;
- }
+static u64 btrfs_get_alloc_profile(struct btrfs_root *root, int data)
+{
+ u64 flags;
- return btrfs_reduce_alloc_profile(root, data);
+ if (data)
+ flags = BTRFS_BLOCK_GROUP_DATA;
+ else if (root == root->fs_info->chunk_root)
+ flags = BTRFS_BLOCK_GROUP_SYSTEM;
+ else
+ flags = BTRFS_BLOCK_GROUP_METADATA;
+
+ return get_alloc_profile(root, flags);
}
void btrfs_set_inode_space_info(struct btrfs_root *root, struct inode *inode)
{
- u64 alloc_target;
-
- alloc_target = btrfs_get_alloc_profile(root, 1);
BTRFS_I(inode)->space_info = __find_space_info(root->fs_info,
- alloc_target);
-}
-
-static u64 calculate_bytes_needed(struct btrfs_root *root, int num_items)
-{
- u64 num_bytes;
- int level;
-
- level = BTRFS_MAX_LEVEL - 2;
- /*
- * NOTE: these calculations are absolutely the worst possible case.
- * This assumes that _every_ item we insert will require a new leaf, and
- * that the tree has grown to its maximum level size.
- */
-
- /*
- * for every item we insert we could insert both an extent item and a
- * extent ref item. Then for ever item we insert, we will need to cow
- * both the original leaf, plus the leaf to the left and right of it.
- *
- * Unless we are talking about the extent root, then we just want the
- * number of items * 2, since we just need the extent item plus its ref.
- */
- if (root == root->fs_info->extent_root)
- num_bytes = num_items * 2;
- else
- num_bytes = (num_items + (2 * num_items)) * 3;
-
- /*
- * num_bytes is total number of leaves we could need times the leaf
- * size, and then for every leaf we could end up cow'ing 2 nodes per
- * level, down to the leaf level.
- */
- num_bytes = (num_bytes * root->leafsize) +
- (num_bytes * (level * 2)) * root->nodesize;
-
- return num_bytes;
-}
-
-/*
- * Unreserve metadata space for delalloc. If we have less reserved credits than
- * we have extents, this function does nothing.
- */
-int btrfs_unreserve_metadata_for_delalloc(struct btrfs_root *root,
- struct inode *inode, int num_items)
-{
- struct btrfs_fs_info *info = root->fs_info;
- struct btrfs_space_info *meta_sinfo;
- u64 num_bytes;
- u64 alloc_target;
- bool bug = false;
-
- /* get the space info for where the metadata will live */
- alloc_target = btrfs_get_alloc_profile(root, 0);
- meta_sinfo = __find_space_info(info, alloc_target);
-
- num_bytes = calculate_bytes_needed(root->fs_info->extent_root,
- num_items);
-
- spin_lock(&meta_sinfo->lock);
- spin_lock(&BTRFS_I(inode)->accounting_lock);
- if (BTRFS_I(inode)->reserved_extents <=
- BTRFS_I(inode)->outstanding_extents) {
- spin_unlock(&BTRFS_I(inode)->accounting_lock);
- spin_unlock(&meta_sinfo->lock);
- return 0;
- }
- spin_unlock(&BTRFS_I(inode)->accounting_lock);
-
- BTRFS_I(inode)->reserved_extents -= num_items;
- BUG_ON(BTRFS_I(inode)->reserved_extents < 0);
-
- if (meta_sinfo->bytes_delalloc < num_bytes) {
- bug = true;
- meta_sinfo->bytes_delalloc = 0;
- } else {
- meta_sinfo->bytes_delalloc -= num_bytes;
- }
- spin_unlock(&meta_sinfo->lock);
-
- BUG_ON(bug);
-
- return 0;
-}
-
-static void check_force_delalloc(struct btrfs_space_info *meta_sinfo)
-{
- u64 thresh;
-
- thresh = meta_sinfo->bytes_used + meta_sinfo->bytes_reserved +
- meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly +
- meta_sinfo->bytes_super + meta_sinfo->bytes_root +
- meta_sinfo->bytes_may_use;
-
- thresh = meta_sinfo->total_bytes - thresh;
- thresh *= 80;
- do_div(thresh, 100);
- if (thresh <= meta_sinfo->bytes_delalloc)
- meta_sinfo->force_delalloc = 1;
- else
- meta_sinfo->force_delalloc = 0;
-}
-
-struct async_flush {
- struct btrfs_root *root;
- struct btrfs_space_info *info;
- struct btrfs_work work;
-};
-
-static noinline void flush_delalloc_async(struct btrfs_work *work)
-{
- struct async_flush *async;
- struct btrfs_root *root;
- struct btrfs_space_info *info;
-
- async = container_of(work, struct async_flush, work);
- root = async->root;
- info = async->info;
-
- btrfs_start_delalloc_inodes(root, 0);
- wake_up(&info->flush_wait);
- btrfs_wait_ordered_extents(root, 0, 0);
-
- spin_lock(&info->lock);
- info->flushing = 0;
- spin_unlock(&info->lock);
- wake_up(&info->flush_wait);
-
- kfree(async);
-}
-
-static void wait_on_flush(struct btrfs_space_info *info)
-{
- DEFINE_WAIT(wait);
- u64 used;
-
- while (1) {
- prepare_to_wait(&info->flush_wait, &wait,
- TASK_UNINTERRUPTIBLE);
- spin_lock(&info->lock);
- if (!info->flushing) {
- spin_unlock(&info->lock);
- break;
- }
-
- used = info->bytes_used + info->bytes_reserved +
- info->bytes_pinned + info->bytes_readonly +
- info->bytes_super + info->bytes_root +
- info->bytes_may_use + info->bytes_delalloc;
- if (used < info->total_bytes) {
- spin_unlock(&info->lock);
- break;
- }
- spin_unlock(&info->lock);
- schedule();
- }
- finish_wait(&info->flush_wait, &wait);
-}
-
-static void flush_delalloc(struct btrfs_root *root,
- struct btrfs_space_info *info)
-{
- struct async_flush *async;
- bool wait = false;
-
- spin_lock(&info->lock);
-
- if (!info->flushing)
- info->flushing = 1;
- else
- wait = true;
-
- spin_unlock(&info->lock);
-
- if (wait) {
- wait_on_flush(info);
- return;
- }
-
- async = kzalloc(sizeof(*async), GFP_NOFS);
- if (!async)
- goto flush;
-
- async->root = root;
- async->info = info;
- async->work.func = flush_delalloc_async;
-
- btrfs_queue_worker(&root->fs_info->enospc_workers,
- &async->work);
- wait_on_flush(info);
- return;
-
-flush:
- btrfs_start_delalloc_inodes(root, 0);
- btrfs_wait_ordered_extents(root, 0, 0);
-
- spin_lock(&info->lock);
- info->flushing = 0;
- spin_unlock(&info->lock);
- wake_up(&info->flush_wait);
-}
-
-static int maybe_allocate_chunk(struct btrfs_root *root,
- struct btrfs_space_info *info)
-{
- struct btrfs_super_block *disk_super = &root->fs_info->super_copy;
- struct btrfs_trans_handle *trans;
- bool wait = false;
- int ret = 0;
- u64 min_metadata;
- u64 free_space;
-
- free_space = btrfs_super_total_bytes(disk_super);
- /*
- * we allow the metadata to grow to a max of either 10gb or 5% of the
- * space in the volume.
- */
- min_metadata = min((u64)10 * 1024 * 1024 * 1024,
- div64_u64(free_space * 5, 100));
- if (info->total_bytes >= min_metadata) {
- spin_unlock(&info->lock);
- return 0;
- }
-
- if (info->full) {
- spin_unlock(&info->lock);
- return 0;
- }
-
- if (!info->allocating_chunk) {
- info->force_alloc = 1;
- info->allocating_chunk = 1;
- } else {
- wait = true;
- }
-
- spin_unlock(&info->lock);
-
- if (wait) {
- wait_event(info->allocate_wait,
- !info->allocating_chunk);
- return 1;
- }
-
- trans = btrfs_start_transaction(root, 1);
- if (!trans) {
- ret = -ENOMEM;
- goto out;
- }
-
- ret = do_chunk_alloc(trans, root->fs_info->extent_root,
- 4096 + 2 * 1024 * 1024,
- info->flags, 0);
- btrfs_end_transaction(trans, root);
- if (ret)
- goto out;
-out:
- spin_lock(&info->lock);
- info->allocating_chunk = 0;
- spin_unlock(&info->lock);
- wake_up(&info->allocate_wait);
-
- if (ret)
- return 0;
- return 1;
-}
-
-/*
- * Reserve metadata space for delalloc.
- */
-int btrfs_reserve_metadata_for_delalloc(struct btrfs_root *root,
- struct inode *inode, int num_items)
-{
- struct btrfs_fs_info *info = root->fs_info;
- struct btrfs_space_info *meta_sinfo;
- u64 num_bytes;
- u64 used;
- u64 alloc_target;
- int flushed = 0;
- int force_delalloc;
-
- /* get the space info for where the metadata will live */
- alloc_target = btrfs_get_alloc_profile(root, 0);
- meta_sinfo = __find_space_info(info, alloc_target);
-
- num_bytes = calculate_bytes_needed(root->fs_info->extent_root,
- num_items);
-again:
- spin_lock(&meta_sinfo->lock);
-
- force_delalloc = meta_sinfo->force_delalloc;
-
- if (unlikely(!meta_sinfo->bytes_root))
- meta_sinfo->bytes_root = calculate_bytes_needed(root, 6);
-
- if (!flushed)
- meta_sinfo->bytes_delalloc += num_bytes;
-
- used = meta_sinfo->bytes_used + meta_sinfo->bytes_reserved +
- meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly +
- meta_sinfo->bytes_super + meta_sinfo->bytes_root +
- meta_sinfo->bytes_may_use + meta_sinfo->bytes_delalloc;
-
- if (used > meta_sinfo->total_bytes) {
- flushed++;
-
- if (flushed == 1) {
- if (maybe_allocate_chunk(root, meta_sinfo))
- goto again;
- flushed++;
- } else {
- spin_unlock(&meta_sinfo->lock);
- }
-
- if (flushed == 2) {
- filemap_flush(inode->i_mapping);
- goto again;
- } else if (flushed == 3) {
- flush_delalloc(root, meta_sinfo);
- goto again;
- }
- spin_lock(&meta_sinfo->lock);
- meta_sinfo->bytes_delalloc -= num_bytes;
- spin_unlock(&meta_sinfo->lock);
- printk(KERN_ERR "enospc, has %d, reserved %d\n",
- BTRFS_I(inode)->outstanding_extents,
- BTRFS_I(inode)->reserved_extents);
- dump_space_info(meta_sinfo, 0, 0);
- return -ENOSPC;
- }
-
- BTRFS_I(inode)->reserved_extents += num_items;
- check_force_delalloc(meta_sinfo);
- spin_unlock(&meta_sinfo->lock);
-
- if (!flushed && force_delalloc)
- filemap_flush(inode->i_mapping);
-
- return 0;
-}
-
-/*
- * unreserve num_items number of items worth of metadata space. This needs to
- * be paired with btrfs_reserve_metadata_space.
- *
- * NOTE: if you have the option, run this _AFTER_ you do a
- * btrfs_end_transaction, since btrfs_end_transaction will run delayed ref
- * oprations which will result in more used metadata, so we want to make sure we
- * can do that without issue.
- */
-int btrfs_unreserve_metadata_space(struct btrfs_root *root, int num_items)
-{
- struct btrfs_fs_info *info = root->fs_info;
- struct btrfs_space_info *meta_sinfo;
- u64 num_bytes;
- u64 alloc_target;
- bool bug = false;
-
- /* get the space info for where the metadata will live */
- alloc_target = btrfs_get_alloc_profile(root, 0);
- meta_sinfo = __find_space_info(info, alloc_target);
-
- num_bytes = calculate_bytes_needed(root, num_items);
-
- spin_lock(&meta_sinfo->lock);
- if (meta_sinfo->bytes_may_use < num_bytes) {
- bug = true;
- meta_sinfo->bytes_may_use = 0;
- } else {
- meta_sinfo->bytes_may_use -= num_bytes;
- }
- spin_unlock(&meta_sinfo->lock);
-
- BUG_ON(bug);
-
- return 0;
-}
-
-/*
- * Reserve some metadata space for use. We'll calculate the worste case number
- * of bytes that would be needed to modify num_items number of items. If we
- * have space, fantastic, if not, you get -ENOSPC. Please call
- * btrfs_unreserve_metadata_space when you are done for the _SAME_ number of
- * items you reserved, since whatever metadata you needed should have already
- * been allocated.
- *
- * This will commit the transaction to make more space if we don't have enough
- * metadata space. THe only time we don't do this is if we're reserving space
- * inside of a transaction, then we will just return -ENOSPC and it is the
- * callers responsibility to handle it properly.
- */
-int btrfs_reserve_metadata_space(struct btrfs_root *root, int num_items)
-{
- struct btrfs_fs_info *info = root->fs_info;
- struct btrfs_space_info *meta_sinfo;
- u64 num_bytes;
- u64 used;
- u64 alloc_target;
- int retries = 0;
-
- /* get the space info for where the metadata will live */
- alloc_target = btrfs_get_alloc_profile(root, 0);
- meta_sinfo = __find_space_info(info, alloc_target);
-
- num_bytes = calculate_bytes_needed(root, num_items);
-again:
- spin_lock(&meta_sinfo->lock);
-
- if (unlikely(!meta_sinfo->bytes_root))
- meta_sinfo->bytes_root = calculate_bytes_needed(root, 6);
-
- if (!retries)
- meta_sinfo->bytes_may_use += num_bytes;
-
- used = meta_sinfo->bytes_used + meta_sinfo->bytes_reserved +
- meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly +
- meta_sinfo->bytes_super + meta_sinfo->bytes_root +
- meta_sinfo->bytes_may_use + meta_sinfo->bytes_delalloc;
-
- if (used > meta_sinfo->total_bytes) {
- retries++;
- if (retries == 1) {
- if (maybe_allocate_chunk(root, meta_sinfo))
- goto again;
- retries++;
- } else {
- spin_unlock(&meta_sinfo->lock);
- }
-
- if (retries == 2) {
- flush_delalloc(root, meta_sinfo);
- goto again;
- }
- spin_lock(&meta_sinfo->lock);
- meta_sinfo->bytes_may_use -= num_bytes;
- spin_unlock(&meta_sinfo->lock);
-
- dump_space_info(meta_sinfo, 0, 0);
- return -ENOSPC;
- }
-
- check_force_delalloc(meta_sinfo);
- spin_unlock(&meta_sinfo->lock);
-
- return 0;
+ BTRFS_BLOCK_GROUP_DATA);
}
/*
* This will check the space that the inode allocates from to make sure we have
* enough space for bytes.
*/
-int btrfs_check_data_free_space(struct btrfs_root *root, struct inode *inode,
- u64 bytes)
+int btrfs_check_data_free_space(struct inode *inode, u64 bytes)
{
struct btrfs_space_info *data_sinfo;
+ struct btrfs_root *root = BTRFS_I(inode)->root;
u64 used;
- int ret = 0, committed = 0, flushed = 0;
+ int ret = 0, committed = 0;
/* make sure bytes are sectorsize aligned */
bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
@@ -3248,21 +2895,13 @@
again:
/* make sure we have enough space to handle the data first */
spin_lock(&data_sinfo->lock);
- used = data_sinfo->bytes_used + data_sinfo->bytes_delalloc +
- data_sinfo->bytes_reserved + data_sinfo->bytes_pinned +
- data_sinfo->bytes_readonly + data_sinfo->bytes_may_use +
- data_sinfo->bytes_super;
+ used = data_sinfo->bytes_used + data_sinfo->bytes_reserved +
+ data_sinfo->bytes_pinned + data_sinfo->bytes_readonly +
+ data_sinfo->bytes_may_use;
if (used + bytes > data_sinfo->total_bytes) {
struct btrfs_trans_handle *trans;
- if (!flushed) {
- spin_unlock(&data_sinfo->lock);
- flush_delalloc(root, data_sinfo);
- flushed = 1;
- goto again;
- }
-
/*
* if we don't have enough free bytes in this space then we need
* to alloc a new chunk.
@@ -3274,15 +2913,15 @@
spin_unlock(&data_sinfo->lock);
alloc:
alloc_target = btrfs_get_alloc_profile(root, 1);
- trans = btrfs_start_transaction(root, 1);
- if (!trans)
- return -ENOMEM;
+ trans = btrfs_join_transaction(root, 1);
+ if (IS_ERR(trans))
+ return PTR_ERR(trans);
ret = do_chunk_alloc(trans, root->fs_info->extent_root,
bytes + 2 * 1024 * 1024,
alloc_target, 0);
btrfs_end_transaction(trans, root);
- if (ret)
+ if (ret < 0)
return ret;
if (!data_sinfo) {
@@ -3297,25 +2936,26 @@
if (!committed && !root->fs_info->open_ioctl_trans) {
committed = 1;
trans = btrfs_join_transaction(root, 1);
- if (!trans)
- return -ENOMEM;
+ if (IS_ERR(trans))
+ return PTR_ERR(trans);
ret = btrfs_commit_transaction(trans, root);
if (ret)
return ret;
goto again;
}
- printk(KERN_ERR "no space left, need %llu, %llu delalloc bytes"
- ", %llu bytes_used, %llu bytes_reserved, "
- "%llu bytes_pinned, %llu bytes_readonly, %llu may use "
- "%llu total\n", (unsigned long long)bytes,
- (unsigned long long)data_sinfo->bytes_delalloc,
+#if 0 /* I hope we never need this code again, just in case */
+ printk(KERN_ERR "no space left, need %llu, %llu bytes_used, "
+ "%llu bytes_reserved, " "%llu bytes_pinned, "
+ "%llu bytes_readonly, %llu may use %llu total\n",
+ (unsigned long long)bytes,
(unsigned long long)data_sinfo->bytes_used,
(unsigned long long)data_sinfo->bytes_reserved,
(unsigned long long)data_sinfo->bytes_pinned,
(unsigned long long)data_sinfo->bytes_readonly,
(unsigned long long)data_sinfo->bytes_may_use,
(unsigned long long)data_sinfo->total_bytes);
+#endif
return -ENOSPC;
}
data_sinfo->bytes_may_use += bytes;
@@ -3326,12 +2966,13 @@
}
/*
- * if there was an error for whatever reason after calling
- * btrfs_check_data_free_space, call this so we can cleanup the counters.
+ * called when we are clearing an delalloc extent from the
+ * inode's io_tree or there was an error for whatever reason
+ * after calling btrfs_check_data_free_space
*/
-void btrfs_free_reserved_data_space(struct btrfs_root *root,
- struct inode *inode, u64 bytes)
+void btrfs_free_reserved_data_space(struct inode *inode, u64 bytes)
{
+ struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_space_info *data_sinfo;
/* make sure bytes are sectorsize aligned */
@@ -3344,48 +2985,6 @@
spin_unlock(&data_sinfo->lock);
}
-/* called when we are adding a delalloc extent to the inode's io_tree */
-void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode,
- u64 bytes)
-{
- struct btrfs_space_info *data_sinfo;
-
- /* get the space info for where this inode will be storing its data */
- data_sinfo = BTRFS_I(inode)->space_info;
-
- /* make sure we have enough space to handle the data first */
- spin_lock(&data_sinfo->lock);
- data_sinfo->bytes_delalloc += bytes;
-
- /*
- * we are adding a delalloc extent without calling
- * btrfs_check_data_free_space first. This happens on a weird
- * writepage condition, but shouldn't hurt our accounting
- */
- if (unlikely(bytes > BTRFS_I(inode)->reserved_bytes)) {
- data_sinfo->bytes_may_use -= BTRFS_I(inode)->reserved_bytes;
- BTRFS_I(inode)->reserved_bytes = 0;
- } else {
- data_sinfo->bytes_may_use -= bytes;
- BTRFS_I(inode)->reserved_bytes -= bytes;
- }
-
- spin_unlock(&data_sinfo->lock);
-}
-
-/* called when we are clearing an delalloc extent from the inode's io_tree */
-void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode,
- u64 bytes)
-{
- struct btrfs_space_info *info;
-
- info = BTRFS_I(inode)->space_info;
-
- spin_lock(&info->lock);
- info->bytes_delalloc -= bytes;
- spin_unlock(&info->lock);
-}
-
static void force_metadata_allocation(struct btrfs_fs_info *info)
{
struct list_head *head = &info->space_info;
@@ -3399,13 +2998,28 @@
rcu_read_unlock();
}
+static int should_alloc_chunk(struct btrfs_space_info *sinfo,
+ u64 alloc_bytes)
+{
+ u64 num_bytes = sinfo->total_bytes - sinfo->bytes_readonly;
+
+ if (sinfo->bytes_used + sinfo->bytes_reserved +
+ alloc_bytes + 256 * 1024 * 1024 < num_bytes)
+ return 0;
+
+ if (sinfo->bytes_used + sinfo->bytes_reserved +
+ alloc_bytes < div_factor(num_bytes, 8))
+ return 0;
+
+ return 1;
+}
+
static int do_chunk_alloc(struct btrfs_trans_handle *trans,
struct btrfs_root *extent_root, u64 alloc_bytes,
u64 flags, int force)
{
struct btrfs_space_info *space_info;
struct btrfs_fs_info *fs_info = extent_root->fs_info;
- u64 thresh;
int ret = 0;
mutex_lock(&fs_info->chunk_mutex);
@@ -3428,11 +3042,7 @@
goto out;
}
- thresh = space_info->total_bytes - space_info->bytes_readonly;
- thresh = div_factor(thresh, 8);
- if (!force &&
- (space_info->bytes_used + space_info->bytes_pinned +
- space_info->bytes_reserved + alloc_bytes) < thresh) {
+ if (!force && !should_alloc_chunk(space_info, alloc_bytes)) {
spin_unlock(&space_info->lock);
goto out;
}
@@ -3454,6 +3064,8 @@
spin_lock(&space_info->lock);
if (ret)
space_info->full = 1;
+ else
+ ret = 1;
space_info->force_alloc = 0;
spin_unlock(&space_info->lock);
out:
@@ -3461,13 +3073,713 @@
return ret;
}
+static int maybe_allocate_chunk(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct btrfs_space_info *sinfo, u64 num_bytes)
+{
+ int ret;
+ int end_trans = 0;
+
+ if (sinfo->full)
+ return 0;
+
+ spin_lock(&sinfo->lock);
+ ret = should_alloc_chunk(sinfo, num_bytes + 2 * 1024 * 1024);
+ spin_unlock(&sinfo->lock);
+ if (!ret)
+ return 0;
+
+ if (!trans) {
+ trans = btrfs_join_transaction(root, 1);
+ BUG_ON(IS_ERR(trans));
+ end_trans = 1;
+ }
+
+ ret = do_chunk_alloc(trans, root->fs_info->extent_root,
+ num_bytes + 2 * 1024 * 1024,
+ get_alloc_profile(root, sinfo->flags), 0);
+
+ if (end_trans)
+ btrfs_end_transaction(trans, root);
+
+ return ret == 1 ? 1 : 0;
+}
+
+/*
+ * shrink metadata reservation for delalloc
+ */
+static int shrink_delalloc(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root, u64 to_reclaim)
+{
+ struct btrfs_block_rsv *block_rsv;
+ u64 reserved;
+ u64 max_reclaim;
+ u64 reclaimed = 0;
+ int pause = 1;
+ int ret;
+
+ block_rsv = &root->fs_info->delalloc_block_rsv;
+ spin_lock(&block_rsv->lock);
+ reserved = block_rsv->reserved;
+ spin_unlock(&block_rsv->lock);
+
+ if (reserved == 0)
+ return 0;
+
+ max_reclaim = min(reserved, to_reclaim);
+
+ while (1) {
+ ret = btrfs_start_one_delalloc_inode(root, trans ? 1 : 0);
+ if (!ret) {
+ __set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(pause);
+ pause <<= 1;
+ if (pause > HZ / 10)
+ pause = HZ / 10;
+ } else {
+ pause = 1;
+ }
+
+ spin_lock(&block_rsv->lock);
+ if (reserved > block_rsv->reserved)
+ reclaimed = reserved - block_rsv->reserved;
+ reserved = block_rsv->reserved;
+ spin_unlock(&block_rsv->lock);
+
+ if (reserved == 0 || reclaimed >= max_reclaim)
+ break;
+
+ if (trans && trans->transaction->blocked)
+ return -EAGAIN;
+ }
+ return reclaimed >= to_reclaim;
+}
+
+static int should_retry_reserve(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct btrfs_block_rsv *block_rsv,
+ u64 num_bytes, int *retries)
+{
+ struct btrfs_space_info *space_info = block_rsv->space_info;
+ int ret;
+
+ if ((*retries) > 2)
+ return -ENOSPC;
+
+ ret = maybe_allocate_chunk(trans, root, space_info, num_bytes);
+ if (ret)
+ return 1;
+
+ if (trans && trans->transaction->in_commit)
+ return -ENOSPC;
+
+ ret = shrink_delalloc(trans, root, num_bytes);
+ if (ret)
+ return ret;
+
+ spin_lock(&space_info->lock);
+ if (space_info->bytes_pinned < num_bytes)
+ ret = 1;
+ spin_unlock(&space_info->lock);
+ if (ret)
+ return -ENOSPC;
+
+ (*retries)++;
+
+ if (trans)
+ return -EAGAIN;
+
+ trans = btrfs_join_transaction(root, 1);
+ BUG_ON(IS_ERR(trans));
+ ret = btrfs_commit_transaction(trans, root);
+ BUG_ON(ret);
+
+ return 1;
+}
+
+static int reserve_metadata_bytes(struct btrfs_block_rsv *block_rsv,
+ u64 num_bytes)
+{
+ struct btrfs_space_info *space_info = block_rsv->space_info;
+ u64 unused;
+ int ret = -ENOSPC;
+
+ spin_lock(&space_info->lock);
+ unused = space_info->bytes_used + space_info->bytes_reserved +
+ space_info->bytes_pinned + space_info->bytes_readonly;
+
+ if (unused < space_info->total_bytes)
+ unused = space_info->total_bytes - unused;
+ else
+ unused = 0;
+
+ if (unused >= num_bytes) {
+ if (block_rsv->priority >= 10) {
+ space_info->bytes_reserved += num_bytes;
+ ret = 0;
+ } else {
+ if ((unused + block_rsv->reserved) *
+ block_rsv->priority >=
+ (num_bytes + block_rsv->reserved) * 10) {
+ space_info->bytes_reserved += num_bytes;
+ ret = 0;
+ }
+ }
+ }
+ spin_unlock(&space_info->lock);
+
+ return ret;
+}
+
+static struct btrfs_block_rsv *get_block_rsv(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root)
+{
+ struct btrfs_block_rsv *block_rsv;
+ if (root->ref_cows)
+ block_rsv = trans->block_rsv;
+ else
+ block_rsv = root->block_rsv;
+
+ if (!block_rsv)
+ block_rsv = &root->fs_info->empty_block_rsv;
+
+ return block_rsv;
+}
+
+static int block_rsv_use_bytes(struct btrfs_block_rsv *block_rsv,
+ u64 num_bytes)
+{
+ int ret = -ENOSPC;
+ spin_lock(&block_rsv->lock);
+ if (block_rsv->reserved >= num_bytes) {
+ block_rsv->reserved -= num_bytes;
+ if (block_rsv->reserved < block_rsv->size)
+ block_rsv->full = 0;
+ ret = 0;
+ }
+ spin_unlock(&block_rsv->lock);
+ return ret;
+}
+
+static void block_rsv_add_bytes(struct btrfs_block_rsv *block_rsv,
+ u64 num_bytes, int update_size)
+{
+ spin_lock(&block_rsv->lock);
+ block_rsv->reserved += num_bytes;
+ if (update_size)
+ block_rsv->size += num_bytes;
+ else if (block_rsv->reserved >= block_rsv->size)
+ block_rsv->full = 1;
+ spin_unlock(&block_rsv->lock);
+}
+
+void block_rsv_release_bytes(struct btrfs_block_rsv *block_rsv,
+ struct btrfs_block_rsv *dest, u64 num_bytes)
+{
+ struct btrfs_space_info *space_info = block_rsv->space_info;
+
+ spin_lock(&block_rsv->lock);
+ if (num_bytes == (u64)-1)
+ num_bytes = block_rsv->size;
+ block_rsv->size -= num_bytes;
+ if (block_rsv->reserved >= block_rsv->size) {
+ num_bytes = block_rsv->reserved - block_rsv->size;
+ block_rsv->reserved = block_rsv->size;
+ block_rsv->full = 1;
+ } else {
+ num_bytes = 0;
+ }
+ spin_unlock(&block_rsv->lock);
+
+ if (num_bytes > 0) {
+ if (dest) {
+ block_rsv_add_bytes(dest, num_bytes, 0);
+ } else {
+ spin_lock(&space_info->lock);
+ space_info->bytes_reserved -= num_bytes;
+ spin_unlock(&space_info->lock);
+ }
+ }
+}
+
+static int block_rsv_migrate_bytes(struct btrfs_block_rsv *src,
+ struct btrfs_block_rsv *dst, u64 num_bytes)
+{
+ int ret;
+
+ ret = block_rsv_use_bytes(src, num_bytes);
+ if (ret)
+ return ret;
+
+ block_rsv_add_bytes(dst, num_bytes, 1);
+ return 0;
+}
+
+void btrfs_init_block_rsv(struct btrfs_block_rsv *rsv)
+{
+ memset(rsv, 0, sizeof(*rsv));
+ spin_lock_init(&rsv->lock);
+ atomic_set(&rsv->usage, 1);
+ rsv->priority = 6;
+ INIT_LIST_HEAD(&rsv->list);
+}
+
+struct btrfs_block_rsv *btrfs_alloc_block_rsv(struct btrfs_root *root)
+{
+ struct btrfs_block_rsv *block_rsv;
+ struct btrfs_fs_info *fs_info = root->fs_info;
+ u64 alloc_target;
+
+ block_rsv = kmalloc(sizeof(*block_rsv), GFP_NOFS);
+ if (!block_rsv)
+ return NULL;
+
+ btrfs_init_block_rsv(block_rsv);
+
+ alloc_target = btrfs_get_alloc_profile(root, 0);
+ block_rsv->space_info = __find_space_info(fs_info,
+ BTRFS_BLOCK_GROUP_METADATA);
+
+ return block_rsv;
+}
+
+void btrfs_free_block_rsv(struct btrfs_root *root,
+ struct btrfs_block_rsv *rsv)
+{
+ if (rsv && atomic_dec_and_test(&rsv->usage)) {
+ btrfs_block_rsv_release(root, rsv, (u64)-1);
+ if (!rsv->durable)
+ kfree(rsv);
+ }
+}
+
+/*
+ * make the block_rsv struct be able to capture freed space.
+ * the captured space will re-add to the the block_rsv struct
+ * after transaction commit
+ */
+void btrfs_add_durable_block_rsv(struct btrfs_fs_info *fs_info,
+ struct btrfs_block_rsv *block_rsv)
+{
+ block_rsv->durable = 1;
+ mutex_lock(&fs_info->durable_block_rsv_mutex);
+ list_add_tail(&block_rsv->list, &fs_info->durable_block_rsv_list);
+ mutex_unlock(&fs_info->durable_block_rsv_mutex);
+}
+
+int btrfs_block_rsv_add(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct btrfs_block_rsv *block_rsv,
+ u64 num_bytes, int *retries)
+{
+ int ret;
+
+ if (num_bytes == 0)
+ return 0;
+again:
+ ret = reserve_metadata_bytes(block_rsv, num_bytes);
+ if (!ret) {
+ block_rsv_add_bytes(block_rsv, num_bytes, 1);
+ return 0;
+ }
+
+ ret = should_retry_reserve(trans, root, block_rsv, num_bytes, retries);
+ if (ret > 0)
+ goto again;
+
+ return ret;
+}
+
+int btrfs_block_rsv_check(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct btrfs_block_rsv *block_rsv,
+ u64 min_reserved, int min_factor)
+{
+ u64 num_bytes = 0;
+ int commit_trans = 0;
+ int ret = -ENOSPC;
+
+ if (!block_rsv)
+ return 0;
+
+ spin_lock(&block_rsv->lock);
+ if (min_factor > 0)
+ num_bytes = div_factor(block_rsv->size, min_factor);
+ if (min_reserved > num_bytes)
+ num_bytes = min_reserved;
+
+ if (block_rsv->reserved >= num_bytes) {
+ ret = 0;
+ } else {
+ num_bytes -= block_rsv->reserved;
+ if (block_rsv->durable &&
+ block_rsv->freed[0] + block_rsv->freed[1] >= num_bytes)
+ commit_trans = 1;
+ }
+ spin_unlock(&block_rsv->lock);
+ if (!ret)
+ return 0;
+
+ if (block_rsv->refill_used) {
+ ret = reserve_metadata_bytes(block_rsv, num_bytes);
+ if (!ret) {
+ block_rsv_add_bytes(block_rsv, num_bytes, 0);
+ return 0;
+ }
+ }
+
+ if (commit_trans) {
+ if (trans)
+ return -EAGAIN;
+
+ trans = btrfs_join_transaction(root, 1);
+ BUG_ON(IS_ERR(trans));
+ ret = btrfs_commit_transaction(trans, root);
+ return 0;
+ }
+
+ WARN_ON(1);
+ printk(KERN_INFO"block_rsv size %llu reserved %llu freed %llu %llu\n",
+ block_rsv->size, block_rsv->reserved,
+ block_rsv->freed[0], block_rsv->freed[1]);
+
+ return -ENOSPC;
+}
+
+int btrfs_block_rsv_migrate(struct btrfs_block_rsv *src_rsv,
+ struct btrfs_block_rsv *dst_rsv,
+ u64 num_bytes)
+{
+ return block_rsv_migrate_bytes(src_rsv, dst_rsv, num_bytes);
+}
+
+void btrfs_block_rsv_release(struct btrfs_root *root,
+ struct btrfs_block_rsv *block_rsv,
+ u64 num_bytes)
+{
+ struct btrfs_block_rsv *global_rsv = &root->fs_info->global_block_rsv;
+ if (global_rsv->full || global_rsv == block_rsv ||
+ block_rsv->space_info != global_rsv->space_info)
+ global_rsv = NULL;
+ block_rsv_release_bytes(block_rsv, global_rsv, num_bytes);
+}
+
+/*
+ * helper to calculate size of global block reservation.
+ * the desired value is sum of space used by extent tree,
+ * checksum tree and root tree
+ */
+static u64 calc_global_metadata_size(struct btrfs_fs_info *fs_info)
+{
+ struct btrfs_space_info *sinfo;
+ u64 num_bytes;
+ u64 meta_used;
+ u64 data_used;
+ int csum_size = btrfs_super_csum_size(&fs_info->super_copy);
+#if 0
+ /*
+ * per tree used space accounting can be inaccuracy, so we
+ * can't rely on it.
+ */
+ spin_lock(&fs_info->extent_root->accounting_lock);
+ num_bytes = btrfs_root_used(&fs_info->extent_root->root_item);
+ spin_unlock(&fs_info->extent_root->accounting_lock);
+
+ spin_lock(&fs_info->csum_root->accounting_lock);
+ num_bytes += btrfs_root_used(&fs_info->csum_root->root_item);
+ spin_unlock(&fs_info->csum_root->accounting_lock);
+
+ spin_lock(&fs_info->tree_root->accounting_lock);
+ num_bytes += btrfs_root_used(&fs_info->tree_root->root_item);
+ spin_unlock(&fs_info->tree_root->accounting_lock);
+#endif
+ sinfo = __find_space_info(fs_info, BTRFS_BLOCK_GROUP_DATA);
+ spin_lock(&sinfo->lock);
+ data_used = sinfo->bytes_used;
+ spin_unlock(&sinfo->lock);
+
+ sinfo = __find_space_info(fs_info, BTRFS_BLOCK_GROUP_METADATA);
+ spin_lock(&sinfo->lock);
+ meta_used = sinfo->bytes_used;
+ spin_unlock(&sinfo->lock);
+
+ num_bytes = (data_used >> fs_info->sb->s_blocksize_bits) *
+ csum_size * 2;
+ num_bytes += div64_u64(data_used + meta_used, 50);
+
+ if (num_bytes * 3 > meta_used)
+ num_bytes = div64_u64(meta_used, 3);
+
+ return ALIGN(num_bytes, fs_info->extent_root->leafsize << 10);
+}
+
+static void update_global_block_rsv(struct btrfs_fs_info *fs_info)
+{
+ struct btrfs_block_rsv *block_rsv = &fs_info->global_block_rsv;
+ struct btrfs_space_info *sinfo = block_rsv->space_info;
+ u64 num_bytes;
+
+ num_bytes = calc_global_metadata_size(fs_info);
+
+ spin_lock(&block_rsv->lock);
+ spin_lock(&sinfo->lock);
+
+ block_rsv->size = num_bytes;
+
+ num_bytes = sinfo->bytes_used + sinfo->bytes_pinned +
+ sinfo->bytes_reserved + sinfo->bytes_readonly;
+
+ if (sinfo->total_bytes > num_bytes) {
+ num_bytes = sinfo->total_bytes - num_bytes;
+ block_rsv->reserved += num_bytes;
+ sinfo->bytes_reserved += num_bytes;
+ }
+
+ if (block_rsv->reserved >= block_rsv->size) {
+ num_bytes = block_rsv->reserved - block_rsv->size;
+ sinfo->bytes_reserved -= num_bytes;
+ block_rsv->reserved = block_rsv->size;
+ block_rsv->full = 1;
+ }
+#if 0
+ printk(KERN_INFO"global block rsv size %llu reserved %llu\n",
+ block_rsv->size, block_rsv->reserved);
+#endif
+ spin_unlock(&sinfo->lock);
+ spin_unlock(&block_rsv->lock);
+}
+
+static void init_global_block_rsv(struct btrfs_fs_info *fs_info)
+{
+ struct btrfs_space_info *space_info;
+
+ space_info = __find_space_info(fs_info, BTRFS_BLOCK_GROUP_SYSTEM);
+ fs_info->chunk_block_rsv.space_info = space_info;
+ fs_info->chunk_block_rsv.priority = 10;
+
+ space_info = __find_space_info(fs_info, BTRFS_BLOCK_GROUP_METADATA);
+ fs_info->global_block_rsv.space_info = space_info;
+ fs_info->global_block_rsv.priority = 10;
+ fs_info->global_block_rsv.refill_used = 1;
+ fs_info->delalloc_block_rsv.space_info = space_info;
+ fs_info->trans_block_rsv.space_info = space_info;
+ fs_info->empty_block_rsv.space_info = space_info;
+ fs_info->empty_block_rsv.priority = 10;
+
+ fs_info->extent_root->block_rsv = &fs_info->global_block_rsv;
+ fs_info->csum_root->block_rsv = &fs_info->global_block_rsv;
+ fs_info->dev_root->block_rsv = &fs_info->global_block_rsv;
+ fs_info->tree_root->block_rsv = &fs_info->global_block_rsv;
+ fs_info->chunk_root->block_rsv = &fs_info->chunk_block_rsv;
+
+ btrfs_add_durable_block_rsv(fs_info, &fs_info->global_block_rsv);
+
+ btrfs_add_durable_block_rsv(fs_info, &fs_info->delalloc_block_rsv);
+
+ update_global_block_rsv(fs_info);
+}
+
+static void release_global_block_rsv(struct btrfs_fs_info *fs_info)
+{
+ block_rsv_release_bytes(&fs_info->global_block_rsv, NULL, (u64)-1);
+ WARN_ON(fs_info->delalloc_block_rsv.size > 0);
+ WARN_ON(fs_info->delalloc_block_rsv.reserved > 0);
+ WARN_ON(fs_info->trans_block_rsv.size > 0);
+ WARN_ON(fs_info->trans_block_rsv.reserved > 0);
+ WARN_ON(fs_info->chunk_block_rsv.size > 0);
+ WARN_ON(fs_info->chunk_block_rsv.reserved > 0);
+}
+
+static u64 calc_trans_metadata_size(struct btrfs_root *root, int num_items)
+{
+ return (root->leafsize + root->nodesize * (BTRFS_MAX_LEVEL - 1)) *
+ 3 * num_items;
+}
+
+int btrfs_trans_reserve_metadata(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ int num_items, int *retries)
+{
+ u64 num_bytes;
+ int ret;
+
+ if (num_items == 0 || root->fs_info->chunk_root == root)
+ return 0;
+
+ num_bytes = calc_trans_metadata_size(root, num_items);
+ ret = btrfs_block_rsv_add(trans, root, &root->fs_info->trans_block_rsv,
+ num_bytes, retries);
+ if (!ret) {
+ trans->bytes_reserved += num_bytes;
+ trans->block_rsv = &root->fs_info->trans_block_rsv;
+ }
+ return ret;
+}
+
+void btrfs_trans_release_metadata(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root)
+{
+ if (!trans->bytes_reserved)
+ return;
+
+ BUG_ON(trans->block_rsv != &root->fs_info->trans_block_rsv);
+ btrfs_block_rsv_release(root, trans->block_rsv,
+ trans->bytes_reserved);
+ trans->bytes_reserved = 0;
+}
+
+int btrfs_orphan_reserve_metadata(struct btrfs_trans_handle *trans,
+ struct inode *inode)
+{
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ struct btrfs_block_rsv *src_rsv = get_block_rsv(trans, root);
+ struct btrfs_block_rsv *dst_rsv = root->orphan_block_rsv;
+
+ /*
+ * one for deleting orphan item, one for updating inode and
+ * two for calling btrfs_truncate_inode_items.
+ *
+ * btrfs_truncate_inode_items is a delete operation, it frees
+ * more space than it uses in most cases. So two units of
+ * metadata space should be enough for calling it many times.
+ * If all of the metadata space is used, we can commit
+ * transaction and use space it freed.
+ */
+ u64 num_bytes = calc_trans_metadata_size(root, 4);
+ return block_rsv_migrate_bytes(src_rsv, dst_rsv, num_bytes);
+}
+
+void btrfs_orphan_release_metadata(struct inode *inode)
+{
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ u64 num_bytes = calc_trans_metadata_size(root, 4);
+ btrfs_block_rsv_release(root, root->orphan_block_rsv, num_bytes);
+}
+
+int btrfs_snap_reserve_metadata(struct btrfs_trans_handle *trans,
+ struct btrfs_pending_snapshot *pending)
+{
+ struct btrfs_root *root = pending->root;
+ struct btrfs_block_rsv *src_rsv = get_block_rsv(trans, root);
+ struct btrfs_block_rsv *dst_rsv = &pending->block_rsv;
+ /*
+ * two for root back/forward refs, two for directory entries
+ * and one for root of the snapshot.
+ */
+ u64 num_bytes = calc_trans_metadata_size(root, 5);
+ dst_rsv->space_info = src_rsv->space_info;
+ return block_rsv_migrate_bytes(src_rsv, dst_rsv, num_bytes);
+}
+
+static u64 calc_csum_metadata_size(struct inode *inode, u64 num_bytes)
+{
+ return num_bytes >>= 3;
+}
+
+int btrfs_delalloc_reserve_metadata(struct inode *inode, u64 num_bytes)
+{
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ struct btrfs_block_rsv *block_rsv = &root->fs_info->delalloc_block_rsv;
+ u64 to_reserve;
+ int nr_extents;
+ int retries = 0;
+ int ret;
+
+ if (btrfs_transaction_in_commit(root->fs_info))
+ schedule_timeout(1);
+
+ num_bytes = ALIGN(num_bytes, root->sectorsize);
+again:
+ spin_lock(&BTRFS_I(inode)->accounting_lock);
+ nr_extents = atomic_read(&BTRFS_I(inode)->outstanding_extents) + 1;
+ if (nr_extents > BTRFS_I(inode)->reserved_extents) {
+ nr_extents -= BTRFS_I(inode)->reserved_extents;
+ to_reserve = calc_trans_metadata_size(root, nr_extents);
+ } else {
+ nr_extents = 0;
+ to_reserve = 0;
+ }
+
+ to_reserve += calc_csum_metadata_size(inode, num_bytes);
+ ret = reserve_metadata_bytes(block_rsv, to_reserve);
+ if (ret) {
+ spin_unlock(&BTRFS_I(inode)->accounting_lock);
+ ret = should_retry_reserve(NULL, root, block_rsv, to_reserve,
+ &retries);
+ if (ret > 0)
+ goto again;
+ return ret;
+ }
+
+ BTRFS_I(inode)->reserved_extents += nr_extents;
+ atomic_inc(&BTRFS_I(inode)->outstanding_extents);
+ spin_unlock(&BTRFS_I(inode)->accounting_lock);
+
+ block_rsv_add_bytes(block_rsv, to_reserve, 1);
+
+ if (block_rsv->size > 512 * 1024 * 1024)
+ shrink_delalloc(NULL, root, to_reserve);
+
+ return 0;
+}
+
+void btrfs_delalloc_release_metadata(struct inode *inode, u64 num_bytes)
+{
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ u64 to_free;
+ int nr_extents;
+
+ num_bytes = ALIGN(num_bytes, root->sectorsize);
+ atomic_dec(&BTRFS_I(inode)->outstanding_extents);
+
+ spin_lock(&BTRFS_I(inode)->accounting_lock);
+ nr_extents = atomic_read(&BTRFS_I(inode)->outstanding_extents);
+ if (nr_extents < BTRFS_I(inode)->reserved_extents) {
+ nr_extents = BTRFS_I(inode)->reserved_extents - nr_extents;
+ BTRFS_I(inode)->reserved_extents -= nr_extents;
+ } else {
+ nr_extents = 0;
+ }
+ spin_unlock(&BTRFS_I(inode)->accounting_lock);
+
+ to_free = calc_csum_metadata_size(inode, num_bytes);
+ if (nr_extents > 0)
+ to_free += calc_trans_metadata_size(root, nr_extents);
+
+ btrfs_block_rsv_release(root, &root->fs_info->delalloc_block_rsv,
+ to_free);
+}
+
+int btrfs_delalloc_reserve_space(struct inode *inode, u64 num_bytes)
+{
+ int ret;
+
+ ret = btrfs_check_data_free_space(inode, num_bytes);
+ if (ret)
+ return ret;
+
+ ret = btrfs_delalloc_reserve_metadata(inode, num_bytes);
+ if (ret) {
+ btrfs_free_reserved_data_space(inode, num_bytes);
+ return ret;
+ }
+
+ return 0;
+}
+
+void btrfs_delalloc_release_space(struct inode *inode, u64 num_bytes)
+{
+ btrfs_delalloc_release_metadata(inode, num_bytes);
+ btrfs_free_reserved_data_space(inode, num_bytes);
+}
+
static int update_block_group(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
- u64 bytenr, u64 num_bytes, int alloc,
- int mark_free)
+ u64 bytenr, u64 num_bytes, int alloc)
{
struct btrfs_block_group_cache *cache;
struct btrfs_fs_info *info = root->fs_info;
+ int factor;
u64 total = num_bytes;
u64 old_val;
u64 byte_in_group;
@@ -3486,6 +3798,12 @@
cache = btrfs_lookup_block_group(info, bytenr);
if (!cache)
return -1;
+ if (cache->flags & (BTRFS_BLOCK_GROUP_DUP |
+ BTRFS_BLOCK_GROUP_RAID1 |
+ BTRFS_BLOCK_GROUP_RAID10))
+ factor = 2;
+ else
+ factor = 1;
byte_in_group = bytenr - cache->key.objectid;
WARN_ON(byte_in_group > cache->key.offset);
@@ -3498,31 +3816,24 @@
old_val += num_bytes;
btrfs_set_block_group_used(&cache->item, old_val);
cache->reserved -= num_bytes;
- cache->space_info->bytes_used += num_bytes;
cache->space_info->bytes_reserved -= num_bytes;
- if (cache->ro)
- cache->space_info->bytes_readonly -= num_bytes;
+ cache->space_info->bytes_used += num_bytes;
+ cache->space_info->disk_used += num_bytes * factor;
spin_unlock(&cache->lock);
spin_unlock(&cache->space_info->lock);
} else {
old_val -= num_bytes;
- cache->space_info->bytes_used -= num_bytes;
- if (cache->ro)
- cache->space_info->bytes_readonly += num_bytes;
btrfs_set_block_group_used(&cache->item, old_val);
+ cache->pinned += num_bytes;
+ cache->space_info->bytes_pinned += num_bytes;
+ cache->space_info->bytes_used -= num_bytes;
+ cache->space_info->disk_used -= num_bytes * factor;
spin_unlock(&cache->lock);
spin_unlock(&cache->space_info->lock);
- if (mark_free) {
- int ret;
- ret = btrfs_discard_extent(root, bytenr,
- num_bytes);
- WARN_ON(ret);
-
- ret = btrfs_add_free_space(cache, bytenr,
- num_bytes);
- WARN_ON(ret);
- }
+ set_extent_dirty(info->pinned_extents,
+ bytenr, bytenr + num_bytes - 1,
+ GFP_NOFS | __GFP_NOFAIL);
}
btrfs_put_block_group(cache);
total -= num_bytes;
@@ -3546,18 +3857,10 @@
return bytenr;
}
-/*
- * this function must be called within transaction
- */
-int btrfs_pin_extent(struct btrfs_root *root,
- u64 bytenr, u64 num_bytes, int reserved)
+static int pin_down_extent(struct btrfs_root *root,
+ struct btrfs_block_group_cache *cache,
+ u64 bytenr, u64 num_bytes, int reserved)
{
- struct btrfs_fs_info *fs_info = root->fs_info;
- struct btrfs_block_group_cache *cache;
-
- cache = btrfs_lookup_block_group(fs_info, bytenr);
- BUG_ON(!cache);
-
spin_lock(&cache->space_info->lock);
spin_lock(&cache->lock);
cache->pinned += num_bytes;
@@ -3569,30 +3872,70 @@
spin_unlock(&cache->lock);
spin_unlock(&cache->space_info->lock);
- btrfs_put_block_group(cache);
-
- set_extent_dirty(fs_info->pinned_extents,
- bytenr, bytenr + num_bytes - 1, GFP_NOFS);
+ set_extent_dirty(root->fs_info->pinned_extents, bytenr,
+ bytenr + num_bytes - 1, GFP_NOFS | __GFP_NOFAIL);
return 0;
}
-static int update_reserved_extents(struct btrfs_block_group_cache *cache,
- u64 num_bytes, int reserve)
+/*
+ * this function must be called within transaction
+ */
+int btrfs_pin_extent(struct btrfs_root *root,
+ u64 bytenr, u64 num_bytes, int reserved)
{
- spin_lock(&cache->space_info->lock);
- spin_lock(&cache->lock);
- if (reserve) {
- cache->reserved += num_bytes;
- cache->space_info->bytes_reserved += num_bytes;
- } else {
- cache->reserved -= num_bytes;
- cache->space_info->bytes_reserved -= num_bytes;
- }
- spin_unlock(&cache->lock);
- spin_unlock(&cache->space_info->lock);
+ struct btrfs_block_group_cache *cache;
+
+ cache = btrfs_lookup_block_group(root->fs_info, bytenr);
+ BUG_ON(!cache);
+
+ pin_down_extent(root, cache, bytenr, num_bytes, reserved);
+
+ btrfs_put_block_group(cache);
return 0;
}
+/*
+ * update size of reserved extents. this function may return -EAGAIN
+ * if 'reserve' is true or 'sinfo' is false.
+ */
+static int update_reserved_bytes(struct btrfs_block_group_cache *cache,
+ u64 num_bytes, int reserve, int sinfo)
+{
+ int ret = 0;
+ if (sinfo) {
+ struct btrfs_space_info *space_info = cache->space_info;
+ spin_lock(&space_info->lock);
+ spin_lock(&cache->lock);
+ if (reserve) {
+ if (cache->ro) {
+ ret = -EAGAIN;
+ } else {
+ cache->reserved += num_bytes;
+ space_info->bytes_reserved += num_bytes;
+ }
+ } else {
+ if (cache->ro)
+ space_info->bytes_readonly += num_bytes;
+ cache->reserved -= num_bytes;
+ space_info->bytes_reserved -= num_bytes;
+ }
+ spin_unlock(&cache->lock);
+ spin_unlock(&space_info->lock);
+ } else {
+ spin_lock(&cache->lock);
+ if (cache->ro) {
+ ret = -EAGAIN;
+ } else {
+ if (reserve)
+ cache->reserved += num_bytes;
+ else
+ cache->reserved -= num_bytes;
+ }
+ spin_unlock(&cache->lock);
+ }
+ return ret;
+}
+
int btrfs_prepare_extent_commit(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
@@ -3621,6 +3964,8 @@
fs_info->pinned_extents = &fs_info->freed_extents[0];
up_write(&fs_info->extent_commit_sem);
+
+ update_global_block_rsv(fs_info);
return 0;
}
@@ -3647,14 +3992,21 @@
btrfs_add_free_space(cache, start, len);
}
+ start += len;
+
spin_lock(&cache->space_info->lock);
spin_lock(&cache->lock);
cache->pinned -= len;
cache->space_info->bytes_pinned -= len;
+ if (cache->ro) {
+ cache->space_info->bytes_readonly += len;
+ } else if (cache->reserved_pinned > 0) {
+ len = min(len, cache->reserved_pinned);
+ cache->reserved_pinned -= len;
+ cache->space_info->bytes_reserved += len;
+ }
spin_unlock(&cache->lock);
spin_unlock(&cache->space_info->lock);
-
- start += len;
}
if (cache)
@@ -3667,8 +4019,11 @@
{
struct btrfs_fs_info *fs_info = root->fs_info;
struct extent_io_tree *unpin;
+ struct btrfs_block_rsv *block_rsv;
+ struct btrfs_block_rsv *next_rsv;
u64 start;
u64 end;
+ int idx;
int ret;
if (fs_info->pinned_extents == &fs_info->freed_extents[0])
@@ -3689,59 +4044,30 @@
cond_resched();
}
- return ret;
-}
+ mutex_lock(&fs_info->durable_block_rsv_mutex);
+ list_for_each_entry_safe(block_rsv, next_rsv,
+ &fs_info->durable_block_rsv_list, list) {
-static int pin_down_bytes(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- struct btrfs_path *path,
- u64 bytenr, u64 num_bytes,
- int is_data, int reserved,
- struct extent_buffer **must_clean)
-{
- int err = 0;
- struct extent_buffer *buf;
-
- if (is_data)
- goto pinit;
-
- /*
- * discard is sloooow, and so triggering discards on
- * individual btree blocks isn't a good plan. Just
- * pin everything in discard mode.
- */
- if (btrfs_test_opt(root, DISCARD))
- goto pinit;
-
- buf = btrfs_find_tree_block(root, bytenr, num_bytes);
- if (!buf)
- goto pinit;
-
- /* we can reuse a block if it hasn't been written
- * and it is from this transaction. We can't
- * reuse anything from the tree log root because
- * it has tiny sub-transactions.
- */
- if (btrfs_buffer_uptodate(buf, 0) &&
- btrfs_try_tree_lock(buf)) {
- u64 header_owner = btrfs_header_owner(buf);
- u64 header_transid = btrfs_header_generation(buf);
- if (header_owner != BTRFS_TREE_LOG_OBJECTID &&
- header_transid == trans->transid &&
- !btrfs_header_flag(buf, BTRFS_HEADER_FLAG_WRITTEN)) {
- *must_clean = buf;
- return 1;
+ idx = trans->transid & 0x1;
+ if (block_rsv->freed[idx] > 0) {
+ block_rsv_add_bytes(block_rsv,
+ block_rsv->freed[idx], 0);
+ block_rsv->freed[idx] = 0;
}
- btrfs_tree_unlock(buf);
- }
- free_extent_buffer(buf);
-pinit:
- if (path)
- btrfs_set_path_blocking(path);
- /* unlocks the pinned mutex */
- btrfs_pin_extent(root, bytenr, num_bytes, reserved);
+ if (atomic_read(&block_rsv->usage) == 0) {
+ btrfs_block_rsv_release(root, block_rsv, (u64)-1);
- BUG_ON(err < 0);
+ if (block_rsv->freed[0] == 0 &&
+ block_rsv->freed[1] == 0) {
+ list_del_init(&block_rsv->list);
+ kfree(block_rsv);
+ }
+ } else {
+ btrfs_block_rsv_release(root, block_rsv, 0);
+ }
+ }
+ mutex_unlock(&fs_info->durable_block_rsv_mutex);
+
return 0;
}
@@ -3902,9 +4228,6 @@
BUG_ON(ret);
}
} else {
- int mark_free = 0;
- struct extent_buffer *must_clean = NULL;
-
if (found_extent) {
BUG_ON(is_data && refs_to_drop !=
extent_data_ref_count(root, path, iref));
@@ -3917,31 +4240,11 @@
}
}
- ret = pin_down_bytes(trans, root, path, bytenr,
- num_bytes, is_data, 0, &must_clean);
- if (ret > 0)
- mark_free = 1;
- BUG_ON(ret < 0);
- /*
- * it is going to be very rare for someone to be waiting
- * on the block we're freeing. del_items might need to
- * schedule, so rather than get fancy, just force it
- * to blocking here
- */
- if (must_clean)
- btrfs_set_lock_blocking(must_clean);
-
ret = btrfs_del_items(trans, extent_root, path, path->slots[0],
num_to_del);
BUG_ON(ret);
btrfs_release_path(extent_root, path);
- if (must_clean) {
- clean_tree_block(NULL, root, must_clean);
- btrfs_tree_unlock(must_clean);
- free_extent_buffer(must_clean);
- }
-
if (is_data) {
ret = btrfs_del_csums(trans, root, bytenr, num_bytes);
BUG_ON(ret);
@@ -3951,8 +4254,7 @@
(bytenr + num_bytes - 1) >> PAGE_CACHE_SHIFT);
}
- ret = update_block_group(trans, root, bytenr, num_bytes, 0,
- mark_free);
+ ret = update_block_group(trans, root, bytenr, num_bytes, 0);
BUG_ON(ret);
}
btrfs_free_path(path);
@@ -3960,7 +4262,7 @@
}
/*
- * when we free an extent, it is possible (and likely) that we free the last
+ * when we free an block, it is possible (and likely) that we free the last
* delayed ref for that extent as well. This searches the delayed ref tree for
* a given extent, and if there are no other delayed refs to be processed, it
* removes it from the tree.
@@ -3972,7 +4274,7 @@
struct btrfs_delayed_ref_root *delayed_refs;
struct btrfs_delayed_ref_node *ref;
struct rb_node *node;
- int ret;
+ int ret = 0;
delayed_refs = &trans->transaction->delayed_refs;
spin_lock(&delayed_refs->lock);
@@ -4024,17 +4326,100 @@
list_del_init(&head->cluster);
spin_unlock(&delayed_refs->lock);
- ret = run_one_delayed_ref(trans, root->fs_info->tree_root,
- &head->node, head->extent_op,
- head->must_insert_reserved);
- BUG_ON(ret);
+ BUG_ON(head->extent_op);
+ if (head->must_insert_reserved)
+ ret = 1;
+
+ mutex_unlock(&head->mutex);
btrfs_put_delayed_ref(&head->node);
- return 0;
+ return ret;
out:
spin_unlock(&delayed_refs->lock);
return 0;
}
+void btrfs_free_tree_block(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct extent_buffer *buf,
+ u64 parent, int last_ref)
+{
+ struct btrfs_block_rsv *block_rsv;
+ struct btrfs_block_group_cache *cache = NULL;
+ int ret;
+
+ if (root->root_key.objectid != BTRFS_TREE_LOG_OBJECTID) {
+ ret = btrfs_add_delayed_tree_ref(trans, buf->start, buf->len,
+ parent, root->root_key.objectid,
+ btrfs_header_level(buf),
+ BTRFS_DROP_DELAYED_REF, NULL);
+ BUG_ON(ret);
+ }
+
+ if (!last_ref)
+ return;
+
+ block_rsv = get_block_rsv(trans, root);
+ cache = btrfs_lookup_block_group(root->fs_info, buf->start);
+ if (block_rsv->space_info != cache->space_info)
+ goto out;
+
+ if (btrfs_header_generation(buf) == trans->transid) {
+ if (root->root_key.objectid != BTRFS_TREE_LOG_OBJECTID) {
+ ret = check_ref_cleanup(trans, root, buf->start);
+ if (!ret)
+ goto pin;
+ }
+
+ if (btrfs_header_flag(buf, BTRFS_HEADER_FLAG_WRITTEN)) {
+ pin_down_extent(root, cache, buf->start, buf->len, 1);
+ goto pin;
+ }
+
+ WARN_ON(test_bit(EXTENT_BUFFER_DIRTY, &buf->bflags));
+
+ btrfs_add_free_space(cache, buf->start, buf->len);
+ ret = update_reserved_bytes(cache, buf->len, 0, 0);
+ if (ret == -EAGAIN) {
+ /* block group became read-only */
+ update_reserved_bytes(cache, buf->len, 0, 1);
+ goto out;
+ }
+
+ ret = 1;
+ spin_lock(&block_rsv->lock);
+ if (block_rsv->reserved < block_rsv->size) {
+ block_rsv->reserved += buf->len;
+ ret = 0;
+ }
+ spin_unlock(&block_rsv->lock);
+
+ if (ret) {
+ spin_lock(&cache->space_info->lock);
+ cache->space_info->bytes_reserved -= buf->len;
+ spin_unlock(&cache->space_info->lock);
+ }
+ goto out;
+ }
+pin:
+ if (block_rsv->durable && !cache->ro) {
+ ret = 0;
+ spin_lock(&cache->lock);
+ if (!cache->ro) {
+ cache->reserved_pinned += buf->len;
+ ret = 1;
+ }
+ spin_unlock(&cache->lock);
+
+ if (ret) {
+ spin_lock(&block_rsv->lock);
+ block_rsv->freed[trans->transid & 0x1] += buf->len;
+ spin_unlock(&block_rsv->lock);
+ }
+ }
+out:
+ btrfs_put_block_group(cache);
+}
+
int btrfs_free_extent(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 bytenr, u64 num_bytes, u64 parent,
@@ -4056,8 +4441,6 @@
parent, root_objectid, (int)owner,
BTRFS_DROP_DELAYED_REF, NULL);
BUG_ON(ret);
- ret = check_ref_cleanup(trans, root, bytenr);
- BUG_ON(ret);
} else {
ret = btrfs_add_delayed_data_ref(trans, bytenr, num_bytes,
parent, root_objectid, owner,
@@ -4067,21 +4450,6 @@
return ret;
}
-int btrfs_free_tree_block(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- u64 bytenr, u32 blocksize,
- u64 parent, u64 root_objectid, int level)
-{
- u64 used;
- spin_lock(&root->node_lock);
- used = btrfs_root_used(&root->root_item) - blocksize;
- btrfs_set_root_used(&root->root_item, used);
- spin_unlock(&root->node_lock);
-
- return btrfs_free_extent(trans, root, bytenr, blocksize,
- parent, root_objectid, level, 0);
-}
-
static u64 stripe_align(struct btrfs_root *root, u64 val)
{
u64 mask = ((u64)root->stripesize - 1);
@@ -4134,6 +4502,22 @@
return 0;
}
+static int get_block_group_index(struct btrfs_block_group_cache *cache)
+{
+ int index;
+ if (cache->flags & BTRFS_BLOCK_GROUP_RAID10)
+ index = 0;
+ else if (cache->flags & BTRFS_BLOCK_GROUP_RAID1)
+ index = 1;
+ else if (cache->flags & BTRFS_BLOCK_GROUP_DUP)
+ index = 2;
+ else if (cache->flags & BTRFS_BLOCK_GROUP_RAID0)
+ index = 3;
+ else
+ index = 4;
+ return index;
+}
+
enum btrfs_loop_type {
LOOP_FIND_IDEAL = 0,
LOOP_CACHING_NOWAIT = 1,
@@ -4155,7 +4539,6 @@
u64 num_bytes, u64 empty_size,
u64 search_start, u64 search_end,
u64 hint_byte, struct btrfs_key *ins,
- u64 exclude_start, u64 exclude_nr,
int data)
{
int ret = 0;
@@ -4168,6 +4551,7 @@
struct btrfs_space_info *space_info;
int last_ptr_loop = 0;
int loop = 0;
+ int index = 0;
bool found_uncached_bg = false;
bool failed_cluster_refill = false;
bool failed_alloc = false;
@@ -4237,6 +4621,7 @@
btrfs_put_block_group(block_group);
up_read(&space_info->groups_sem);
} else {
+ index = get_block_group_index(block_group);
goto have_block_group;
}
} else if (block_group) {
@@ -4245,7 +4630,8 @@
}
search:
down_read(&space_info->groups_sem);
- list_for_each_entry(block_group, &space_info->block_groups, list) {
+ list_for_each_entry(block_group, &space_info->block_groups[index],
+ list) {
u64 offset;
int cached;
@@ -4436,23 +4822,6 @@
goto loop;
}
- if (exclude_nr > 0 &&
- (search_start + num_bytes > exclude_start &&
- search_start < exclude_start + exclude_nr)) {
- search_start = exclude_start + exclude_nr;
-
- btrfs_add_free_space(block_group, offset, num_bytes);
- /*
- * if search_start is still in this block group
- * then we just re-search this block group
- */
- if (search_start >= block_group->key.objectid &&
- search_start < (block_group->key.objectid +
- block_group->key.offset))
- goto have_block_group;
- goto loop;
- }
-
ins->objectid = search_start;
ins->offset = num_bytes;
@@ -4461,17 +4830,33 @@
search_start - offset);
BUG_ON(offset > search_start);
- update_reserved_extents(block_group, num_bytes, 1);
+ ret = update_reserved_bytes(block_group, num_bytes, 1,
+ (data & BTRFS_BLOCK_GROUP_DATA));
+ if (ret == -EAGAIN) {
+ btrfs_add_free_space(block_group, offset, num_bytes);
+ goto loop;
+ }
/* we are all good, lets return */
+ ins->objectid = search_start;
+ ins->offset = num_bytes;
+
+ if (offset < search_start)
+ btrfs_add_free_space(block_group, offset,
+ search_start - offset);
+ BUG_ON(offset > search_start);
break;
loop:
failed_cluster_refill = false;
failed_alloc = false;
+ BUG_ON(index != get_block_group_index(block_group));
btrfs_put_block_group(block_group);
}
up_read(&space_info->groups_sem);
+ if (!ins->objectid && ++index < BTRFS_NR_RAID_TYPES)
+ goto search;
+
/* LOOP_FIND_IDEAL, only search caching/cached bg's, and don't wait for
* for them to make caching progress. Also
* determine the best possible bg to cache
@@ -4485,6 +4870,7 @@
if (!ins->objectid && loop < LOOP_NO_EMPTY_SIZE &&
(found_uncached_bg || empty_size || empty_cluster ||
allowed_chunk_alloc)) {
+ index = 0;
if (loop == LOOP_FIND_IDEAL && found_uncached_bg) {
found_uncached_bg = false;
loop++;
@@ -4567,31 +4953,30 @@
int dump_block_groups)
{
struct btrfs_block_group_cache *cache;
+ int index = 0;
spin_lock(&info->lock);
printk(KERN_INFO "space_info has %llu free, is %sfull\n",
(unsigned long long)(info->total_bytes - info->bytes_used -
info->bytes_pinned - info->bytes_reserved -
- info->bytes_super),
+ info->bytes_readonly),
(info->full) ? "" : "not ");
- printk(KERN_INFO "space_info total=%llu, pinned=%llu, delalloc=%llu,"
- " may_use=%llu, used=%llu, root=%llu, super=%llu, reserved=%llu"
- "\n",
+ printk(KERN_INFO "space_info total=%llu, used=%llu, pinned=%llu, "
+ "reserved=%llu, may_use=%llu, readonly=%llu\n",
(unsigned long long)info->total_bytes,
- (unsigned long long)info->bytes_pinned,
- (unsigned long long)info->bytes_delalloc,
- (unsigned long long)info->bytes_may_use,
(unsigned long long)info->bytes_used,
- (unsigned long long)info->bytes_root,
- (unsigned long long)info->bytes_super,
- (unsigned long long)info->bytes_reserved);
+ (unsigned long long)info->bytes_pinned,
+ (unsigned long long)info->bytes_reserved,
+ (unsigned long long)info->bytes_may_use,
+ (unsigned long long)info->bytes_readonly);
spin_unlock(&info->lock);
if (!dump_block_groups)
return;
down_read(&info->groups_sem);
- list_for_each_entry(cache, &info->block_groups, list) {
+again:
+ list_for_each_entry(cache, &info->block_groups[index], list) {
spin_lock(&cache->lock);
printk(KERN_INFO "block group %llu has %llu bytes, %llu used "
"%llu pinned %llu reserved\n",
@@ -4603,6 +4988,8 @@
btrfs_dump_free_space(cache, bytes);
spin_unlock(&cache->lock);
}
+ if (++index < BTRFS_NR_RAID_TYPES)
+ goto again;
up_read(&info->groups_sem);
}
@@ -4628,9 +5015,8 @@
WARN_ON(num_bytes < root->sectorsize);
ret = find_free_extent(trans, root, num_bytes, empty_size,
- search_start, search_end, hint_byte, ins,
- trans->alloc_exclude_start,
- trans->alloc_exclude_nr, data);
+ search_start, search_end, hint_byte,
+ ins, data);
if (ret == -ENOSPC && num_bytes > min_alloc_size) {
num_bytes = num_bytes >> 1;
@@ -4668,7 +5054,7 @@
ret = btrfs_discard_extent(root, start, len);
btrfs_add_free_space(cache, start, len);
- update_reserved_extents(cache, len, 0);
+ update_reserved_bytes(cache, len, 0, 1);
btrfs_put_block_group(cache);
return ret;
@@ -4731,8 +5117,7 @@
btrfs_mark_buffer_dirty(path->nodes[0]);
btrfs_free_path(path);
- ret = update_block_group(trans, root, ins->objectid, ins->offset,
- 1, 0);
+ ret = update_block_group(trans, root, ins->objectid, ins->offset, 1);
if (ret) {
printk(KERN_ERR "btrfs update block group failed for %llu "
"%llu\n", (unsigned long long)ins->objectid,
@@ -4792,8 +5177,7 @@
btrfs_mark_buffer_dirty(leaf);
btrfs_free_path(path);
- ret = update_block_group(trans, root, ins->objectid, ins->offset,
- 1, 0);
+ ret = update_block_group(trans, root, ins->objectid, ins->offset, 1);
if (ret) {
printk(KERN_ERR "btrfs update block group failed for %llu "
"%llu\n", (unsigned long long)ins->objectid,
@@ -4869,73 +5253,14 @@
put_caching_control(caching_ctl);
}
- update_reserved_extents(block_group, ins->offset, 1);
+ ret = update_reserved_bytes(block_group, ins->offset, 1, 1);
+ BUG_ON(ret);
btrfs_put_block_group(block_group);
ret = alloc_reserved_file_extent(trans, root, 0, root_objectid,
0, owner, offset, ins, 1);
return ret;
}
-/*
- * finds a free extent and does all the dirty work required for allocation
- * returns the key for the extent through ins, and a tree buffer for
- * the first block of the extent through buf.
- *
- * returns 0 if everything worked, non-zero otherwise.
- */
-static int alloc_tree_block(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- u64 num_bytes, u64 parent, u64 root_objectid,
- struct btrfs_disk_key *key, int level,
- u64 empty_size, u64 hint_byte, u64 search_end,
- struct btrfs_key *ins)
-{
- int ret;
- u64 flags = 0;
-
- ret = btrfs_reserve_extent(trans, root, num_bytes, num_bytes,
- empty_size, hint_byte, search_end,
- ins, 0);
- if (ret)
- return ret;
-
- if (root_objectid == BTRFS_TREE_RELOC_OBJECTID) {
- if (parent == 0)
- parent = ins->objectid;
- flags |= BTRFS_BLOCK_FLAG_FULL_BACKREF;
- } else
- BUG_ON(parent > 0);
-
- if (root_objectid != BTRFS_TREE_LOG_OBJECTID) {
- struct btrfs_delayed_extent_op *extent_op;
- extent_op = kmalloc(sizeof(*extent_op), GFP_NOFS);
- BUG_ON(!extent_op);
- if (key)
- memcpy(&extent_op->key, key, sizeof(extent_op->key));
- else
- memset(&extent_op->key, 0, sizeof(extent_op->key));
- extent_op->flags_to_set = flags;
- extent_op->update_key = 1;
- extent_op->update_flags = 1;
- extent_op->is_data = 0;
-
- ret = btrfs_add_delayed_tree_ref(trans, ins->objectid,
- ins->offset, parent, root_objectid,
- level, BTRFS_ADD_DELAYED_EXTENT,
- extent_op);
- BUG_ON(ret);
- }
-
- if (root_objectid == root->root_key.objectid) {
- u64 used;
- spin_lock(&root->node_lock);
- used = btrfs_root_used(&root->root_item) + num_bytes;
- btrfs_set_root_used(&root->root_item, used);
- spin_unlock(&root->node_lock);
- }
- return ret;
-}
-
struct extent_buffer *btrfs_init_new_buffer(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 bytenr, u32 blocksize,
@@ -4974,8 +5299,45 @@
return buf;
}
+static struct btrfs_block_rsv *
+use_block_rsv(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root, u32 blocksize)
+{
+ struct btrfs_block_rsv *block_rsv;
+ int ret;
+
+ block_rsv = get_block_rsv(trans, root);
+
+ if (block_rsv->size == 0) {
+ ret = reserve_metadata_bytes(block_rsv, blocksize);
+ if (ret)
+ return ERR_PTR(ret);
+ return block_rsv;
+ }
+
+ ret = block_rsv_use_bytes(block_rsv, blocksize);
+ if (!ret)
+ return block_rsv;
+
+ WARN_ON(1);
+ printk(KERN_INFO"block_rsv size %llu reserved %llu freed %llu %llu\n",
+ block_rsv->size, block_rsv->reserved,
+ block_rsv->freed[0], block_rsv->freed[1]);
+
+ return ERR_PTR(-ENOSPC);
+}
+
+static void unuse_block_rsv(struct btrfs_block_rsv *block_rsv, u32 blocksize)
+{
+ block_rsv_add_bytes(block_rsv, blocksize, 0);
+ block_rsv_release_bytes(block_rsv, NULL, 0);
+}
+
/*
- * helper function to allocate a block for a given tree
+ * finds a free extent and does all the dirty work required for allocation
+ * returns the key for the extent through ins, and a tree buffer for
+ * the first block of the extent through buf.
+ *
* returns the tree buffer or NULL.
*/
struct extent_buffer *btrfs_alloc_free_block(struct btrfs_trans_handle *trans,
@@ -4985,18 +5347,53 @@
u64 hint, u64 empty_size)
{
struct btrfs_key ins;
- int ret;
+ struct btrfs_block_rsv *block_rsv;
struct extent_buffer *buf;
+ u64 flags = 0;
+ int ret;
- ret = alloc_tree_block(trans, root, blocksize, parent, root_objectid,
- key, level, empty_size, hint, (u64)-1, &ins);
+
+ block_rsv = use_block_rsv(trans, root, blocksize);
+ if (IS_ERR(block_rsv))
+ return ERR_CAST(block_rsv);
+
+ ret = btrfs_reserve_extent(trans, root, blocksize, blocksize,
+ empty_size, hint, (u64)-1, &ins, 0);
if (ret) {
- BUG_ON(ret > 0);
+ unuse_block_rsv(block_rsv, blocksize);
return ERR_PTR(ret);
}
buf = btrfs_init_new_buffer(trans, root, ins.objectid,
blocksize, level);
+ BUG_ON(IS_ERR(buf));
+
+ if (root_objectid == BTRFS_TREE_RELOC_OBJECTID) {
+ if (parent == 0)
+ parent = ins.objectid;
+ flags |= BTRFS_BLOCK_FLAG_FULL_BACKREF;
+ } else
+ BUG_ON(parent > 0);
+
+ if (root_objectid != BTRFS_TREE_LOG_OBJECTID) {
+ struct btrfs_delayed_extent_op *extent_op;
+ extent_op = kmalloc(sizeof(*extent_op), GFP_NOFS);
+ BUG_ON(!extent_op);
+ if (key)
+ memcpy(&extent_op->key, key, sizeof(extent_op->key));
+ else
+ memset(&extent_op->key, 0, sizeof(extent_op->key));
+ extent_op->flags_to_set = flags;
+ extent_op->update_key = 1;
+ extent_op->update_flags = 1;
+ extent_op->is_data = 0;
+
+ ret = btrfs_add_delayed_tree_ref(trans, ins.objectid,
+ ins.offset, parent, root_objectid,
+ level, BTRFS_ADD_DELAYED_EXTENT,
+ extent_op);
+ BUG_ON(ret);
+ }
return buf;
}
@@ -5321,7 +5718,7 @@
struct btrfs_path *path,
struct walk_control *wc)
{
- int ret = 0;
+ int ret;
int level = wc->level;
struct extent_buffer *eb = path->nodes[level];
u64 parent = 0;
@@ -5399,13 +5796,11 @@
btrfs_header_owner(path->nodes[level + 1]));
}
- ret = btrfs_free_extent(trans, root, eb->start, eb->len, parent,
- root->root_key.objectid, level, 0);
- BUG_ON(ret);
+ btrfs_free_tree_block(trans, root, eb, parent, wc->refs[level] == 1);
out:
wc->refs[level] = 0;
wc->flags[level] = 0;
- return ret;
+ return 0;
}
static noinline int walk_down_tree(struct btrfs_trans_handle *trans,
@@ -5483,7 +5878,8 @@
* also make sure backrefs for the shared block and all lower level
* blocks are properly updated.
*/
-int btrfs_drop_snapshot(struct btrfs_root *root, int update_ref)
+int btrfs_drop_snapshot(struct btrfs_root *root,
+ struct btrfs_block_rsv *block_rsv, int update_ref)
{
struct btrfs_path *path;
struct btrfs_trans_handle *trans;
@@ -5501,7 +5897,9 @@
wc = kzalloc(sizeof(*wc), GFP_NOFS);
BUG_ON(!wc);
- trans = btrfs_start_transaction(tree_root, 1);
+ trans = btrfs_start_transaction(tree_root, 0);
+ if (block_rsv)
+ trans->block_rsv = block_rsv;
if (btrfs_disk_key_objectid(&root_item->drop_progress) == 0) {
level = btrfs_header_level(root->node);
@@ -5589,22 +5987,16 @@
}
BUG_ON(wc->level == 0);
- if (trans->transaction->in_commit ||
- trans->transaction->delayed_refs.flushing) {
+ if (btrfs_should_end_transaction(trans, tree_root)) {
ret = btrfs_update_root(trans, tree_root,
&root->root_key,
root_item);
BUG_ON(ret);
- btrfs_end_transaction(trans, tree_root);
- trans = btrfs_start_transaction(tree_root, 1);
- } else {
- unsigned long update;
- update = trans->delayed_ref_updates;
- trans->delayed_ref_updates = 0;
- if (update)
- btrfs_run_delayed_refs(trans, tree_root,
- update);
+ btrfs_end_transaction_throttle(trans, tree_root);
+ trans = btrfs_start_transaction(tree_root, 0);
+ if (block_rsv)
+ trans->block_rsv = block_rsv;
}
}
btrfs_release_path(root, path);
@@ -5632,7 +6024,7 @@
kfree(root);
}
out:
- btrfs_end_transaction(trans, tree_root);
+ btrfs_end_transaction_throttle(trans, tree_root);
kfree(wc);
btrfs_free_path(path);
return err;
@@ -7228,48 +7620,80 @@
return flags;
}
-static int __alloc_chunk_for_shrink(struct btrfs_root *root,
- struct btrfs_block_group_cache *shrink_block_group,
- int force)
+static int set_block_group_ro(struct btrfs_block_group_cache *cache)
{
- struct btrfs_trans_handle *trans;
- u64 new_alloc_flags;
- u64 calc;
+ struct btrfs_space_info *sinfo = cache->space_info;
+ u64 num_bytes;
+ int ret = -ENOSPC;
- spin_lock(&shrink_block_group->lock);
- if (btrfs_block_group_used(&shrink_block_group->item) +
- shrink_block_group->reserved > 0) {
- spin_unlock(&shrink_block_group->lock);
+ if (cache->ro)
+ return 0;
- trans = btrfs_start_transaction(root, 1);
- spin_lock(&shrink_block_group->lock);
+ spin_lock(&sinfo->lock);
+ spin_lock(&cache->lock);
+ num_bytes = cache->key.offset - cache->reserved - cache->pinned -
+ cache->bytes_super - btrfs_block_group_used(&cache->item);
- new_alloc_flags = update_block_group_flags(root,
- shrink_block_group->flags);
- if (new_alloc_flags != shrink_block_group->flags) {
- calc =
- btrfs_block_group_used(&shrink_block_group->item);
- } else {
- calc = shrink_block_group->key.offset;
- }
- spin_unlock(&shrink_block_group->lock);
-
- do_chunk_alloc(trans, root->fs_info->extent_root,
- calc + 2 * 1024 * 1024, new_alloc_flags, force);
-
- btrfs_end_transaction(trans, root);
- } else
- spin_unlock(&shrink_block_group->lock);
- return 0;
+ if (sinfo->bytes_used + sinfo->bytes_reserved + sinfo->bytes_pinned +
+ sinfo->bytes_may_use + sinfo->bytes_readonly +
+ cache->reserved_pinned + num_bytes < sinfo->total_bytes) {
+ sinfo->bytes_readonly += num_bytes;
+ sinfo->bytes_reserved += cache->reserved_pinned;
+ cache->reserved_pinned = 0;
+ cache->ro = 1;
+ ret = 0;
+ }
+ spin_unlock(&cache->lock);
+ spin_unlock(&sinfo->lock);
+ return ret;
}
-
-int btrfs_prepare_block_group_relocation(struct btrfs_root *root,
- struct btrfs_block_group_cache *group)
+int btrfs_set_block_group_ro(struct btrfs_root *root,
+ struct btrfs_block_group_cache *cache)
{
- __alloc_chunk_for_shrink(root, group, 1);
- set_block_group_readonly(group);
+ struct btrfs_trans_handle *trans;
+ u64 alloc_flags;
+ int ret;
+
+ BUG_ON(cache->ro);
+
+ trans = btrfs_join_transaction(root, 1);
+ BUG_ON(IS_ERR(trans));
+
+ alloc_flags = update_block_group_flags(root, cache->flags);
+ if (alloc_flags != cache->flags)
+ do_chunk_alloc(trans, root, 2 * 1024 * 1024, alloc_flags, 1);
+
+ ret = set_block_group_ro(cache);
+ if (!ret)
+ goto out;
+ alloc_flags = get_alloc_profile(root, cache->space_info->flags);
+ ret = do_chunk_alloc(trans, root, 2 * 1024 * 1024, alloc_flags, 1);
+ if (ret < 0)
+ goto out;
+ ret = set_block_group_ro(cache);
+out:
+ btrfs_end_transaction(trans, root);
+ return ret;
+}
+
+int btrfs_set_block_group_rw(struct btrfs_root *root,
+ struct btrfs_block_group_cache *cache)
+{
+ struct btrfs_space_info *sinfo = cache->space_info;
+ u64 num_bytes;
+
+ BUG_ON(!cache->ro);
+
+ spin_lock(&sinfo->lock);
+ spin_lock(&cache->lock);
+ num_bytes = cache->key.offset - cache->reserved - cache->pinned -
+ cache->bytes_super - btrfs_block_group_used(&cache->item);
+ sinfo->bytes_readonly -= num_bytes;
+ cache->ro = 0;
+ spin_unlock(&cache->lock);
+ spin_unlock(&sinfo->lock);
return 0;
}
@@ -7436,17 +7860,33 @@
*/
synchronize_rcu();
+ release_global_block_rsv(info);
+
while(!list_empty(&info->space_info)) {
space_info = list_entry(info->space_info.next,
struct btrfs_space_info,
list);
-
+ if (space_info->bytes_pinned > 0 ||
+ space_info->bytes_reserved > 0) {
+ WARN_ON(1);
+ dump_space_info(space_info, 0, 0);
+ }
list_del(&space_info->list);
kfree(space_info);
}
return 0;
}
+static void __link_block_group(struct btrfs_space_info *space_info,
+ struct btrfs_block_group_cache *cache)
+{
+ int index = get_block_group_index(cache);
+
+ down_write(&space_info->groups_sem);
+ list_add_tail(&cache->list, &space_info->block_groups[index]);
+ up_write(&space_info->groups_sem);
+}
+
int btrfs_read_block_groups(struct btrfs_root *root)
{
struct btrfs_path *path;
@@ -7468,10 +7908,8 @@
while (1) {
ret = find_first_block_group(root, path, &key);
- if (ret > 0) {
- ret = 0;
- goto error;
- }
+ if (ret > 0)
+ break;
if (ret != 0)
goto error;
@@ -7480,7 +7918,7 @@
cache = kzalloc(sizeof(*cache), GFP_NOFS);
if (!cache) {
ret = -ENOMEM;
- break;
+ goto error;
}
atomic_set(&cache->count, 1);
@@ -7537,20 +7975,36 @@
BUG_ON(ret);
cache->space_info = space_info;
spin_lock(&cache->space_info->lock);
- cache->space_info->bytes_super += cache->bytes_super;
+ cache->space_info->bytes_readonly += cache->bytes_super;
spin_unlock(&cache->space_info->lock);
- down_write(&space_info->groups_sem);
- list_add_tail(&cache->list, &space_info->block_groups);
- up_write(&space_info->groups_sem);
+ __link_block_group(space_info, cache);
ret = btrfs_add_block_group_cache(root->fs_info, cache);
BUG_ON(ret);
set_avail_alloc_bits(root->fs_info, cache->flags);
if (btrfs_chunk_readonly(root, cache->key.objectid))
- set_block_group_readonly(cache);
+ set_block_group_ro(cache);
}
+
+ list_for_each_entry_rcu(space_info, &root->fs_info->space_info, list) {
+ if (!(get_alloc_profile(root, space_info->flags) &
+ (BTRFS_BLOCK_GROUP_RAID10 |
+ BTRFS_BLOCK_GROUP_RAID1 |
+ BTRFS_BLOCK_GROUP_DUP)))
+ continue;
+ /*
+ * avoid allocating from un-mirrored block group if there are
+ * mirrored block groups.
+ */
+ list_for_each_entry(cache, &space_info->block_groups[3], list)
+ set_block_group_ro(cache);
+ list_for_each_entry(cache, &space_info->block_groups[4], list)
+ set_block_group_ro(cache);
+ }
+
+ init_global_block_rsv(info);
ret = 0;
error:
btrfs_free_path(path);
@@ -7611,12 +8065,10 @@
BUG_ON(ret);
spin_lock(&cache->space_info->lock);
- cache->space_info->bytes_super += cache->bytes_super;
+ cache->space_info->bytes_readonly += cache->bytes_super;
spin_unlock(&cache->space_info->lock);
- down_write(&cache->space_info->groups_sem);
- list_add_tail(&cache->list, &cache->space_info->block_groups);
- up_write(&cache->space_info->groups_sem);
+ __link_block_group(cache->space_info, cache);
ret = btrfs_add_block_group_cache(root->fs_info, cache);
BUG_ON(ret);
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index d2d0368..d74e6af 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -135,7 +135,7 @@
return state;
}
-static void free_extent_state(struct extent_state *state)
+void free_extent_state(struct extent_state *state)
{
if (!state)
return;
@@ -335,21 +335,18 @@
}
static int set_state_cb(struct extent_io_tree *tree,
- struct extent_state *state,
- unsigned long bits)
+ struct extent_state *state, int *bits)
{
if (tree->ops && tree->ops->set_bit_hook) {
return tree->ops->set_bit_hook(tree->mapping->host,
- state->start, state->end,
- state->state, bits);
+ state, bits);
}
return 0;
}
static void clear_state_cb(struct extent_io_tree *tree,
- struct extent_state *state,
- unsigned long bits)
+ struct extent_state *state, int *bits)
{
if (tree->ops && tree->ops->clear_bit_hook)
tree->ops->clear_bit_hook(tree->mapping->host, state, bits);
@@ -367,9 +364,10 @@
*/
static int insert_state(struct extent_io_tree *tree,
struct extent_state *state, u64 start, u64 end,
- int bits)
+ int *bits)
{
struct rb_node *node;
+ int bits_to_set = *bits & ~EXTENT_CTLBITS;
int ret;
if (end < start) {
@@ -384,9 +382,9 @@
if (ret)
return ret;
- if (bits & EXTENT_DIRTY)
+ if (bits_to_set & EXTENT_DIRTY)
tree->dirty_bytes += end - start + 1;
- state->state |= bits;
+ state->state |= bits_to_set;
node = tree_insert(&tree->state, end, &state->rb_node);
if (node) {
struct extent_state *found;
@@ -456,13 +454,13 @@
* struct is freed and removed from the tree
*/
static int clear_state_bit(struct extent_io_tree *tree,
- struct extent_state *state, int bits, int wake,
- int delete)
+ struct extent_state *state,
+ int *bits, int wake)
{
- int bits_to_clear = bits & ~EXTENT_DO_ACCOUNTING;
+ int bits_to_clear = *bits & ~EXTENT_CTLBITS;
int ret = state->state & bits_to_clear;
- if ((bits & EXTENT_DIRTY) && (state->state & EXTENT_DIRTY)) {
+ if ((bits_to_clear & EXTENT_DIRTY) && (state->state & EXTENT_DIRTY)) {
u64 range = state->end - state->start + 1;
WARN_ON(range > tree->dirty_bytes);
tree->dirty_bytes -= range;
@@ -471,9 +469,8 @@
state->state &= ~bits_to_clear;
if (wake)
wake_up(&state->wq);
- if (delete || state->state == 0) {
+ if (state->state == 0) {
if (state->tree) {
- clear_state_cb(tree, state, state->state);
rb_erase(&state->rb_node, &tree->state);
state->tree = NULL;
free_extent_state(state);
@@ -514,6 +511,10 @@
int set = 0;
int clear = 0;
+ if (delete)
+ bits |= ~EXTENT_CTLBITS;
+ bits |= EXTENT_FIRST_DELALLOC;
+
if (bits & (EXTENT_IOBITS | EXTENT_BOUNDARY))
clear = 1;
again:
@@ -580,8 +581,7 @@
if (err)
goto out;
if (state->end <= end) {
- set |= clear_state_bit(tree, state, bits, wake,
- delete);
+ set |= clear_state_bit(tree, state, &bits, wake);
if (last_end == (u64)-1)
goto out;
start = last_end + 1;
@@ -602,7 +602,7 @@
if (wake)
wake_up(&state->wq);
- set |= clear_state_bit(tree, prealloc, bits, wake, delete);
+ set |= clear_state_bit(tree, prealloc, &bits, wake);
prealloc = NULL;
goto out;
@@ -613,7 +613,7 @@
else
next_node = NULL;
- set |= clear_state_bit(tree, state, bits, wake, delete);
+ set |= clear_state_bit(tree, state, &bits, wake);
if (last_end == (u64)-1)
goto out;
start = last_end + 1;
@@ -706,19 +706,19 @@
static int set_state_bits(struct extent_io_tree *tree,
struct extent_state *state,
- int bits)
+ int *bits)
{
int ret;
+ int bits_to_set = *bits & ~EXTENT_CTLBITS;
ret = set_state_cb(tree, state, bits);
if (ret)
return ret;
-
- if ((bits & EXTENT_DIRTY) && !(state->state & EXTENT_DIRTY)) {
+ if ((bits_to_set & EXTENT_DIRTY) && !(state->state & EXTENT_DIRTY)) {
u64 range = state->end - state->start + 1;
tree->dirty_bytes += range;
}
- state->state |= bits;
+ state->state |= bits_to_set;
return 0;
}
@@ -745,10 +745,9 @@
* [start, end] is inclusive This takes the tree lock.
*/
-static int set_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
- int bits, int exclusive_bits, u64 *failed_start,
- struct extent_state **cached_state,
- gfp_t mask)
+int set_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
+ int bits, int exclusive_bits, u64 *failed_start,
+ struct extent_state **cached_state, gfp_t mask)
{
struct extent_state *state;
struct extent_state *prealloc = NULL;
@@ -757,6 +756,7 @@
u64 last_start;
u64 last_end;
+ bits |= EXTENT_FIRST_DELALLOC;
again:
if (!prealloc && (mask & __GFP_WAIT)) {
prealloc = alloc_extent_state(mask);
@@ -778,7 +778,7 @@
*/
node = tree_search(tree, start);
if (!node) {
- err = insert_state(tree, prealloc, start, end, bits);
+ err = insert_state(tree, prealloc, start, end, &bits);
prealloc = NULL;
BUG_ON(err == -EEXIST);
goto out;
@@ -802,7 +802,7 @@
goto out;
}
- err = set_state_bits(tree, state, bits);
+ err = set_state_bits(tree, state, &bits);
if (err)
goto out;
@@ -852,7 +852,7 @@
if (err)
goto out;
if (state->end <= end) {
- err = set_state_bits(tree, state, bits);
+ err = set_state_bits(tree, state, &bits);
if (err)
goto out;
cache_state(state, cached_state);
@@ -877,7 +877,7 @@
else
this_end = last_start - 1;
err = insert_state(tree, prealloc, start, this_end,
- bits);
+ &bits);
BUG_ON(err == -EEXIST);
if (err) {
prealloc = NULL;
@@ -903,7 +903,7 @@
err = split_state(tree, state, prealloc, end + 1);
BUG_ON(err == -EEXIST);
- err = set_state_bits(tree, prealloc, bits);
+ err = set_state_bits(tree, prealloc, &bits);
if (err) {
prealloc = NULL;
goto out;
@@ -966,8 +966,7 @@
{
return clear_extent_bit(tree, start, end,
EXTENT_DIRTY | EXTENT_DELALLOC |
- EXTENT_DO_ACCOUNTING, 0, 0,
- NULL, mask);
+ EXTENT_DO_ACCOUNTING, 0, 0, NULL, mask);
}
int set_extent_new(struct extent_io_tree *tree, u64 start, u64 end,
@@ -1435,9 +1434,6 @@
if (op & EXTENT_CLEAR_DELALLOC)
clear_bits |= EXTENT_DELALLOC;
- if (op & EXTENT_CLEAR_ACCOUNTING)
- clear_bits |= EXTENT_DO_ACCOUNTING;
-
clear_extent_bit(tree, start, end, clear_bits, 1, 0, NULL, GFP_NOFS);
if (!(op & (EXTENT_CLEAR_UNLOCK_PAGE | EXTENT_CLEAR_DIRTY |
EXTENT_SET_WRITEBACK | EXTENT_END_WRITEBACK |
@@ -1916,7 +1912,7 @@
if (tree->ops && tree->ops->submit_bio_hook)
tree->ops->submit_bio_hook(page->mapping->host, rw, bio,
- mirror_num, bio_flags);
+ mirror_num, bio_flags, start);
else
submit_bio(rw, bio);
if (bio_flagged(bio, BIO_EOPNOTSUPP))
@@ -2020,6 +2016,7 @@
sector_t sector;
struct extent_map *em;
struct block_device *bdev;
+ struct btrfs_ordered_extent *ordered;
int ret;
int nr = 0;
size_t page_offset = 0;
@@ -2031,7 +2028,15 @@
set_page_extent_mapped(page);
end = page_end;
- lock_extent(tree, start, end, GFP_NOFS);
+ while (1) {
+ lock_extent(tree, start, end, GFP_NOFS);
+ ordered = btrfs_lookup_ordered_extent(inode, start);
+ if (!ordered)
+ break;
+ unlock_extent(tree, start, end, GFP_NOFS);
+ btrfs_start_ordered_extent(inode, ordered, 1);
+ btrfs_put_ordered_extent(ordered);
+ }
if (page->index == last_byte >> PAGE_CACHE_SHIFT) {
char *userpage;
@@ -2589,7 +2594,6 @@
.sync_io = wbc->sync_mode == WB_SYNC_ALL,
};
struct writeback_control wbc_writepages = {
- .bdi = wbc->bdi,
.sync_mode = wbc->sync_mode,
.older_than_this = NULL,
.nr_to_write = 64,
@@ -2623,7 +2627,6 @@
.sync_io = mode == WB_SYNC_ALL,
};
struct writeback_control wbc_writepages = {
- .bdi = inode->i_mapping->backing_dev_info,
.sync_mode = mode,
.older_than_this = NULL,
.nr_to_write = nr_pages * 2,
diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h
index bbab481..5691c7b 100644
--- a/fs/btrfs/extent_io.h
+++ b/fs/btrfs/extent_io.h
@@ -16,7 +16,9 @@
#define EXTENT_BOUNDARY (1 << 9)
#define EXTENT_NODATASUM (1 << 10)
#define EXTENT_DO_ACCOUNTING (1 << 11)
+#define EXTENT_FIRST_DELALLOC (1 << 12)
#define EXTENT_IOBITS (EXTENT_LOCKED | EXTENT_WRITEBACK)
+#define EXTENT_CTLBITS (EXTENT_DO_ACCOUNTING | EXTENT_FIRST_DELALLOC)
/* flags for bio submission */
#define EXTENT_BIO_COMPRESSED 1
@@ -47,7 +49,7 @@
typedef int (extent_submit_bio_hook_t)(struct inode *inode, int rw,
struct bio *bio, int mirror_num,
- unsigned long bio_flags);
+ unsigned long bio_flags, u64 bio_offset);
struct extent_io_ops {
int (*fill_delalloc)(struct inode *inode, struct page *locked_page,
u64 start, u64 end, int *page_started,
@@ -69,10 +71,10 @@
struct extent_state *state);
int (*writepage_end_io_hook)(struct page *page, u64 start, u64 end,
struct extent_state *state, int uptodate);
- int (*set_bit_hook)(struct inode *inode, u64 start, u64 end,
- unsigned long old, unsigned long bits);
+ int (*set_bit_hook)(struct inode *inode, struct extent_state *state,
+ int *bits);
int (*clear_bit_hook)(struct inode *inode, struct extent_state *state,
- unsigned long bits);
+ int *bits);
int (*merge_extent_hook)(struct inode *inode,
struct extent_state *new,
struct extent_state *other);
@@ -176,6 +178,7 @@
u64 *start, u64 search_end,
u64 max_bytes, unsigned long bits);
+void free_extent_state(struct extent_state *state);
int test_range_bit(struct extent_io_tree *tree, u64 start, u64 end,
int bits, int filled, struct extent_state *cached_state);
int clear_extent_bits(struct extent_io_tree *tree, u64 start, u64 end,
@@ -185,6 +188,9 @@
gfp_t mask);
int set_extent_bits(struct extent_io_tree *tree, u64 start, u64 end,
int bits, gfp_t mask);
+int set_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
+ int bits, int exclusive_bits, u64 *failed_start,
+ struct extent_state **cached_state, gfp_t mask);
int set_extent_uptodate(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask);
int set_extent_new(struct extent_io_tree *tree, u64 start, u64 end,
diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c
index 54a2550..a562a25 100644
--- a/fs/btrfs/file-item.c
+++ b/fs/btrfs/file-item.c
@@ -149,13 +149,14 @@
}
-int btrfs_lookup_bio_sums(struct btrfs_root *root, struct inode *inode,
- struct bio *bio, u32 *dst)
+static int __btrfs_lookup_bio_sums(struct btrfs_root *root,
+ struct inode *inode, struct bio *bio,
+ u64 logical_offset, u32 *dst, int dio)
{
u32 sum;
struct bio_vec *bvec = bio->bi_io_vec;
int bio_index = 0;
- u64 offset;
+ u64 offset = 0;
u64 item_start_offset = 0;
u64 item_last_offset = 0;
u64 disk_bytenr;
@@ -174,8 +175,11 @@
WARN_ON(bio->bi_vcnt <= 0);
disk_bytenr = (u64)bio->bi_sector << 9;
+ if (dio)
+ offset = logical_offset;
while (bio_index < bio->bi_vcnt) {
- offset = page_offset(bvec->bv_page) + bvec->bv_offset;
+ if (!dio)
+ offset = page_offset(bvec->bv_page) + bvec->bv_offset;
ret = btrfs_find_ordered_sum(inode, offset, disk_bytenr, &sum);
if (ret == 0)
goto found;
@@ -238,6 +242,7 @@
else
set_state_private(io_tree, offset, sum);
disk_bytenr += bvec->bv_len;
+ offset += bvec->bv_len;
bio_index++;
bvec++;
}
@@ -245,6 +250,18 @@
return 0;
}
+int btrfs_lookup_bio_sums(struct btrfs_root *root, struct inode *inode,
+ struct bio *bio, u32 *dst)
+{
+ return __btrfs_lookup_bio_sums(root, inode, bio, 0, dst, 0);
+}
+
+int btrfs_lookup_bio_sums_dio(struct btrfs_root *root, struct inode *inode,
+ struct bio *bio, u64 offset, u32 *dst)
+{
+ return __btrfs_lookup_bio_sums(root, inode, bio, offset, dst, 1);
+}
+
int btrfs_lookup_csums_range(struct btrfs_root *root, u64 start, u64 end,
struct list_head *list)
{
@@ -657,6 +674,9 @@
goto found;
}
ret = PTR_ERR(item);
+ if (ret != -EFBIG && ret != -ENOENT)
+ goto fail_unlock;
+
if (ret == -EFBIG) {
u32 item_size;
/* we found one, but it isn't big enough yet */
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 29ff749..e354c33 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -46,32 +46,42 @@
static noinline int btrfs_copy_from_user(loff_t pos, int num_pages,
int write_bytes,
struct page **prepared_pages,
- const char __user *buf)
+ struct iov_iter *i)
{
- long page_fault = 0;
- int i;
+ size_t copied;
+ int pg = 0;
int offset = pos & (PAGE_CACHE_SIZE - 1);
- for (i = 0; i < num_pages && write_bytes > 0; i++, offset = 0) {
+ while (write_bytes > 0) {
size_t count = min_t(size_t,
PAGE_CACHE_SIZE - offset, write_bytes);
- struct page *page = prepared_pages[i];
- fault_in_pages_readable(buf, count);
+ struct page *page = prepared_pages[pg];
+again:
+ if (unlikely(iov_iter_fault_in_readable(i, count)))
+ return -EFAULT;
/* Copy data from userspace to the current page */
- kmap(page);
- page_fault = __copy_from_user(page_address(page) + offset,
- buf, count);
+ copied = iov_iter_copy_from_user(page, i, offset, count);
+
/* Flush processor's dcache for this page */
flush_dcache_page(page);
- kunmap(page);
- buf += count;
- write_bytes -= count;
+ iov_iter_advance(i, copied);
+ write_bytes -= copied;
- if (page_fault)
- break;
+ if (unlikely(copied == 0)) {
+ count = min_t(size_t, PAGE_CACHE_SIZE - offset,
+ iov_iter_single_seg_count(i));
+ goto again;
+ }
+
+ if (unlikely(copied < PAGE_CACHE_SIZE - offset)) {
+ offset += copied;
+ } else {
+ pg++;
+ offset = 0;
+ }
}
- return page_fault ? -EFAULT : 0;
+ return 0;
}
/*
@@ -126,8 +136,7 @@
end_of_last_block = start_pos + num_bytes - 1;
err = btrfs_set_extent_delalloc(inode, start_pos, end_of_last_block,
NULL);
- if (err)
- return err;
+ BUG_ON(err);
for (i = 0; i < num_pages; i++) {
struct page *p = pages[i];
@@ -142,7 +151,7 @@
* at this time.
*/
}
- return err;
+ return 0;
}
/*
@@ -823,45 +832,46 @@
return 0;
}
-static ssize_t btrfs_file_write(struct file *file, const char __user *buf,
- size_t count, loff_t *ppos)
+static ssize_t btrfs_file_aio_write(struct kiocb *iocb,
+ const struct iovec *iov,
+ unsigned long nr_segs, loff_t pos)
{
- loff_t pos;
+ struct file *file = iocb->ki_filp;
+ struct inode *inode = fdentry(file)->d_inode;
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ struct page *pinned[2];
+ struct page **pages = NULL;
+ struct iov_iter i;
+ loff_t *ppos = &iocb->ki_pos;
loff_t start_pos;
ssize_t num_written = 0;
ssize_t err = 0;
+ size_t count;
+ size_t ocount;
int ret = 0;
- struct inode *inode = fdentry(file)->d_inode;
- struct btrfs_root *root = BTRFS_I(inode)->root;
- struct page **pages = NULL;
int nrptrs;
- struct page *pinned[2];
unsigned long first_index;
unsigned long last_index;
int will_write;
+ int buffered = 0;
will_write = ((file->f_flags & O_DSYNC) || IS_SYNC(inode) ||
(file->f_flags & O_DIRECT));
- nrptrs = min((count + PAGE_CACHE_SIZE - 1) / PAGE_CACHE_SIZE,
- PAGE_CACHE_SIZE / (sizeof(struct page *)));
pinned[0] = NULL;
pinned[1] = NULL;
- pos = *ppos;
start_pos = pos;
vfs_check_frozen(inode->i_sb, SB_FREEZE_WRITE);
- /* do the reserve before the mutex lock in case we have to do some
- * flushing. We wouldn't deadlock, but this is more polite.
- */
- err = btrfs_reserve_metadata_for_delalloc(root, inode, 1);
- if (err)
- goto out_nolock;
-
mutex_lock(&inode->i_mutex);
+ err = generic_segment_checks(iov, &nr_segs, &ocount, VERIFY_READ);
+ if (err)
+ goto out;
+ count = ocount;
+
current->backing_dev_info = inode->i_mapping->backing_dev_info;
err = generic_write_checks(file, &pos, &count, S_ISBLK(inode->i_mode));
if (err)
@@ -875,15 +885,53 @@
goto out;
file_update_time(file);
+ BTRFS_I(inode)->sequence++;
+ if (unlikely(file->f_flags & O_DIRECT)) {
+ num_written = generic_file_direct_write(iocb, iov, &nr_segs,
+ pos, ppos, count,
+ ocount);
+ /*
+ * the generic O_DIRECT will update in-memory i_size after the
+ * DIOs are done. But our endio handlers that update the on
+ * disk i_size never update past the in memory i_size. So we
+ * need one more update here to catch any additions to the
+ * file
+ */
+ if (inode->i_size != BTRFS_I(inode)->disk_i_size) {
+ btrfs_ordered_update_i_size(inode, inode->i_size, NULL);
+ mark_inode_dirty(inode);
+ }
+
+ if (num_written < 0) {
+ ret = num_written;
+ num_written = 0;
+ goto out;
+ } else if (num_written == count) {
+ /* pick up pos changes done by the generic code */
+ pos = *ppos;
+ goto out;
+ }
+ /*
+ * We are going to do buffered for the rest of the range, so we
+ * need to make sure to invalidate the buffered pages when we're
+ * done.
+ */
+ buffered = 1;
+ pos += num_written;
+ }
+
+ iov_iter_init(&i, iov, nr_segs, count, num_written);
+ nrptrs = min((iov_iter_count(&i) + PAGE_CACHE_SIZE - 1) /
+ PAGE_CACHE_SIZE, PAGE_CACHE_SIZE /
+ (sizeof(struct page *)));
pages = kmalloc(nrptrs * sizeof(struct page *), GFP_KERNEL);
/* generic_write_checks can change our pos */
start_pos = pos;
- BTRFS_I(inode)->sequence++;
first_index = pos >> PAGE_CACHE_SHIFT;
- last_index = (pos + count) >> PAGE_CACHE_SHIFT;
+ last_index = (pos + iov_iter_count(&i)) >> PAGE_CACHE_SHIFT;
/*
* there are lots of better ways to do this, but this code
@@ -900,7 +948,7 @@
unlock_page(pinned[0]);
}
}
- if ((pos + count) & (PAGE_CACHE_SIZE - 1)) {
+ if ((pos + iov_iter_count(&i)) & (PAGE_CACHE_SIZE - 1)) {
pinned[1] = grab_cache_page(inode->i_mapping, last_index);
if (!PageUptodate(pinned[1])) {
ret = btrfs_readpage(NULL, pinned[1]);
@@ -911,10 +959,10 @@
}
}
- while (count > 0) {
+ while (iov_iter_count(&i) > 0) {
size_t offset = pos & (PAGE_CACHE_SIZE - 1);
- size_t write_bytes = min(count, nrptrs *
- (size_t)PAGE_CACHE_SIZE -
+ size_t write_bytes = min(iov_iter_count(&i),
+ nrptrs * (size_t)PAGE_CACHE_SIZE -
offset);
size_t num_pages = (write_bytes + PAGE_CACHE_SIZE - 1) >>
PAGE_CACHE_SHIFT;
@@ -922,7 +970,7 @@
WARN_ON(num_pages > nrptrs);
memset(pages, 0, sizeof(struct page *) * nrptrs);
- ret = btrfs_check_data_free_space(root, inode, write_bytes);
+ ret = btrfs_delalloc_reserve_space(inode, write_bytes);
if (ret)
goto out;
@@ -930,26 +978,20 @@
pos, first_index, last_index,
write_bytes);
if (ret) {
- btrfs_free_reserved_data_space(root, inode,
- write_bytes);
+ btrfs_delalloc_release_space(inode, write_bytes);
goto out;
}
ret = btrfs_copy_from_user(pos, num_pages,
- write_bytes, pages, buf);
- if (ret) {
- btrfs_free_reserved_data_space(root, inode,
- write_bytes);
- btrfs_drop_pages(pages, num_pages);
- goto out;
+ write_bytes, pages, &i);
+ if (ret == 0) {
+ dirty_and_release_pages(NULL, root, file, pages,
+ num_pages, pos, write_bytes);
}
- ret = dirty_and_release_pages(NULL, root, file, pages,
- num_pages, pos, write_bytes);
btrfs_drop_pages(pages, num_pages);
if (ret) {
- btrfs_free_reserved_data_space(root, inode,
- write_bytes);
+ btrfs_delalloc_release_space(inode, write_bytes);
goto out;
}
@@ -965,8 +1007,6 @@
btrfs_throttle(root);
}
- buf += write_bytes;
- count -= write_bytes;
pos += write_bytes;
num_written += write_bytes;
@@ -976,9 +1016,7 @@
mutex_unlock(&inode->i_mutex);
if (ret)
err = ret;
- btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
-out_nolock:
kfree(pages);
if (pinned[0])
page_cache_release(pinned[0]);
@@ -1008,7 +1046,7 @@
num_written = err;
if ((file->f_flags & O_DSYNC) || IS_SYNC(inode)) {
- trans = btrfs_start_transaction(root, 1);
+ trans = btrfs_start_transaction(root, 0);
ret = btrfs_log_dentry_safe(trans, root,
file->f_dentry);
if (ret == 0) {
@@ -1023,7 +1061,7 @@
btrfs_end_transaction(trans, root);
}
}
- if (file->f_flags & O_DIRECT) {
+ if (file->f_flags & O_DIRECT && buffered) {
invalidate_mapping_pages(inode->i_mapping,
start_pos >> PAGE_CACHE_SHIFT,
(start_pos + num_written - 1) >> PAGE_CACHE_SHIFT);
@@ -1063,8 +1101,9 @@
* important optimization for directories because holding the mutex prevents
* new operations on the dir while we write to disk.
*/
-int btrfs_sync_file(struct file *file, struct dentry *dentry, int datasync)
+int btrfs_sync_file(struct file *file, int datasync)
{
+ struct dentry *dentry = file->f_path.dentry;
struct inode *inode = dentry->d_inode;
struct btrfs_root *root = BTRFS_I(inode)->root;
int ret = 0;
@@ -1101,12 +1140,12 @@
/*
* ok we haven't committed the transaction yet, lets do a commit
*/
- if (file && file->private_data)
+ if (file->private_data)
btrfs_ioctl_trans_end(file);
- trans = btrfs_start_transaction(root, 1);
- if (!trans) {
- ret = -ENOMEM;
+ trans = btrfs_start_transaction(root, 0);
+ if (IS_ERR(trans)) {
+ ret = PTR_ERR(trans);
goto out;
}
@@ -1151,17 +1190,25 @@
static int btrfs_file_mmap(struct file *filp, struct vm_area_struct *vma)
{
- vma->vm_ops = &btrfs_file_vm_ops;
+ struct address_space *mapping = filp->f_mapping;
+
+ if (!mapping->a_ops->readpage)
+ return -ENOEXEC;
+
file_accessed(filp);
+ vma->vm_ops = &btrfs_file_vm_ops;
+ vma->vm_flags |= VM_CAN_NONLINEAR;
+
return 0;
}
const struct file_operations btrfs_file_operations = {
.llseek = generic_file_llseek,
.read = do_sync_read,
+ .write = do_sync_write,
.aio_read = generic_file_aio_read,
.splice_read = generic_file_splice_read,
- .write = btrfs_file_write,
+ .aio_write = btrfs_file_aio_write,
.mmap = btrfs_file_mmap,
.open = generic_file_open,
.release = btrfs_release_file,
diff --git a/fs/btrfs/inode-item.c b/fs/btrfs/inode-item.c
index 72ce3c1..64f1150 100644
--- a/fs/btrfs/inode-item.c
+++ b/fs/btrfs/inode-item.c
@@ -49,6 +49,33 @@
return 0;
}
+struct btrfs_inode_ref *
+btrfs_lookup_inode_ref(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct btrfs_path *path,
+ const char *name, int name_len,
+ u64 inode_objectid, u64 ref_objectid, int mod)
+{
+ struct btrfs_key key;
+ struct btrfs_inode_ref *ref;
+ int ins_len = mod < 0 ? -1 : 0;
+ int cow = mod != 0;
+ int ret;
+
+ key.objectid = inode_objectid;
+ key.type = BTRFS_INODE_REF_KEY;
+ key.offset = ref_objectid;
+
+ ret = btrfs_search_slot(trans, root, &key, path, ins_len, cow);
+ if (ret < 0)
+ return ERR_PTR(ret);
+ if (ret > 0)
+ return NULL;
+ if (!find_name_in_backref(path, name, name_len, &ref))
+ return NULL;
+ return ref;
+}
+
int btrfs_del_inode_ref(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
const char *name, int name_len,
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index d601629..1bff92a 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -252,6 +252,7 @@
inline_len, compressed_size,
compressed_pages);
BUG_ON(ret);
+ btrfs_delalloc_release_metadata(inode, end + 1 - start);
btrfs_drop_extent_cache(inode, start, aligned_end - 1, 0);
return 0;
}
@@ -414,6 +415,7 @@
trans = btrfs_join_transaction(root, 1);
BUG_ON(!trans);
btrfs_set_trans_block_group(trans, inode);
+ trans->block_rsv = &root->fs_info->delalloc_block_rsv;
/* lets try to make an inline extent */
if (ret || total_in < (actual_end - start)) {
@@ -439,7 +441,6 @@
start, end, NULL,
EXTENT_CLEAR_UNLOCK_PAGE | EXTENT_CLEAR_DIRTY |
EXTENT_CLEAR_DELALLOC |
- EXTENT_CLEAR_ACCOUNTING |
EXTENT_SET_WRITEBACK | EXTENT_END_WRITEBACK);
btrfs_end_transaction(trans, root);
@@ -697,6 +698,38 @@
return 0;
}
+static u64 get_extent_allocation_hint(struct inode *inode, u64 start,
+ u64 num_bytes)
+{
+ struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
+ struct extent_map *em;
+ u64 alloc_hint = 0;
+
+ read_lock(&em_tree->lock);
+ em = search_extent_mapping(em_tree, start, num_bytes);
+ if (em) {
+ /*
+ * if block start isn't an actual block number then find the
+ * first block in this inode and use that as a hint. If that
+ * block is also bogus then just don't worry about it.
+ */
+ if (em->block_start >= EXTENT_MAP_LAST_BYTE) {
+ free_extent_map(em);
+ em = search_extent_mapping(em_tree, 0, 0);
+ if (em && em->block_start < EXTENT_MAP_LAST_BYTE)
+ alloc_hint = em->block_start;
+ if (em)
+ free_extent_map(em);
+ } else {
+ alloc_hint = em->block_start;
+ free_extent_map(em);
+ }
+ }
+ read_unlock(&em_tree->lock);
+
+ return alloc_hint;
+}
+
/*
* when extent_io.c finds a delayed allocation range in the file,
* the call backs end up in this code. The basic idea is to
@@ -734,6 +767,7 @@
trans = btrfs_join_transaction(root, 1);
BUG_ON(!trans);
btrfs_set_trans_block_group(trans, inode);
+ trans->block_rsv = &root->fs_info->delalloc_block_rsv;
actual_end = min_t(u64, isize, end + 1);
@@ -753,7 +787,6 @@
EXTENT_CLEAR_UNLOCK_PAGE |
EXTENT_CLEAR_UNLOCK |
EXTENT_CLEAR_DELALLOC |
- EXTENT_CLEAR_ACCOUNTING |
EXTENT_CLEAR_DIRTY |
EXTENT_SET_WRITEBACK |
EXTENT_END_WRITEBACK);
@@ -769,29 +802,7 @@
BUG_ON(disk_num_bytes >
btrfs_super_total_bytes(&root->fs_info->super_copy));
-
- read_lock(&BTRFS_I(inode)->extent_tree.lock);
- em = search_extent_mapping(&BTRFS_I(inode)->extent_tree,
- start, num_bytes);
- if (em) {
- /*
- * if block start isn't an actual block number then find the
- * first block in this inode and use that as a hint. If that
- * block is also bogus then just don't worry about it.
- */
- if (em->block_start >= EXTENT_MAP_LAST_BYTE) {
- free_extent_map(em);
- em = search_extent_mapping(em_tree, 0, 0);
- if (em && em->block_start < EXTENT_MAP_LAST_BYTE)
- alloc_hint = em->block_start;
- if (em)
- free_extent_map(em);
- } else {
- alloc_hint = em->block_start;
- free_extent_map(em);
- }
- }
- read_unlock(&BTRFS_I(inode)->extent_tree.lock);
+ alloc_hint = get_extent_allocation_hint(inode, start, num_bytes);
btrfs_drop_extent_cache(inode, start, start + num_bytes - 1, 0);
while (disk_num_bytes > 0) {
@@ -1174,6 +1185,13 @@
num_bytes, num_bytes, type);
BUG_ON(ret);
+ if (root->root_key.objectid ==
+ BTRFS_DATA_RELOC_TREE_OBJECTID) {
+ ret = btrfs_reloc_clone_csums(inode, cur_offset,
+ num_bytes);
+ BUG_ON(ret);
+ }
+
extent_clear_unlock_delalloc(inode, &BTRFS_I(inode)->io_tree,
cur_offset, cur_offset + num_bytes - 1,
locked_page, EXTENT_CLEAR_UNLOCK_PAGE |
@@ -1226,15 +1244,13 @@
}
static int btrfs_split_extent_hook(struct inode *inode,
- struct extent_state *orig, u64 split)
+ struct extent_state *orig, u64 split)
{
+ /* not delalloc, ignore it */
if (!(orig->state & EXTENT_DELALLOC))
return 0;
- spin_lock(&BTRFS_I(inode)->accounting_lock);
- BTRFS_I(inode)->outstanding_extents++;
- spin_unlock(&BTRFS_I(inode)->accounting_lock);
-
+ atomic_inc(&BTRFS_I(inode)->outstanding_extents);
return 0;
}
@@ -1252,10 +1268,7 @@
if (!(other->state & EXTENT_DELALLOC))
return 0;
- spin_lock(&BTRFS_I(inode)->accounting_lock);
- BTRFS_I(inode)->outstanding_extents--;
- spin_unlock(&BTRFS_I(inode)->accounting_lock);
-
+ atomic_dec(&BTRFS_I(inode)->outstanding_extents);
return 0;
}
@@ -1264,8 +1277,8 @@
* bytes in this file, and to maintain the list of inodes that
* have pending delalloc work to be done.
*/
-static int btrfs_set_bit_hook(struct inode *inode, u64 start, u64 end,
- unsigned long old, unsigned long bits)
+static int btrfs_set_bit_hook(struct inode *inode,
+ struct extent_state *state, int *bits)
{
/*
@@ -1273,17 +1286,18 @@
* but in this case, we are only testeing for the DELALLOC
* bit, which is only set or cleared with irqs on
*/
- if (!(old & EXTENT_DELALLOC) && (bits & EXTENT_DELALLOC)) {
+ if (!(state->state & EXTENT_DELALLOC) && (*bits & EXTENT_DELALLOC)) {
struct btrfs_root *root = BTRFS_I(inode)->root;
+ u64 len = state->end + 1 - state->start;
- spin_lock(&BTRFS_I(inode)->accounting_lock);
- BTRFS_I(inode)->outstanding_extents++;
- spin_unlock(&BTRFS_I(inode)->accounting_lock);
- btrfs_delalloc_reserve_space(root, inode, end - start + 1);
+ if (*bits & EXTENT_FIRST_DELALLOC)
+ *bits &= ~EXTENT_FIRST_DELALLOC;
+ else
+ atomic_inc(&BTRFS_I(inode)->outstanding_extents);
spin_lock(&root->fs_info->delalloc_lock);
- BTRFS_I(inode)->delalloc_bytes += end - start + 1;
- root->fs_info->delalloc_bytes += end - start + 1;
+ BTRFS_I(inode)->delalloc_bytes += len;
+ root->fs_info->delalloc_bytes += len;
if (list_empty(&BTRFS_I(inode)->delalloc_inodes)) {
list_add_tail(&BTRFS_I(inode)->delalloc_inodes,
&root->fs_info->delalloc_inodes);
@@ -1297,45 +1311,32 @@
* extent_io.c clear_bit_hook, see set_bit_hook for why
*/
static int btrfs_clear_bit_hook(struct inode *inode,
- struct extent_state *state, unsigned long bits)
+ struct extent_state *state, int *bits)
{
/*
* set_bit and clear bit hooks normally require _irqsave/restore
* but in this case, we are only testeing for the DELALLOC
* bit, which is only set or cleared with irqs on
*/
- if ((state->state & EXTENT_DELALLOC) && (bits & EXTENT_DELALLOC)) {
+ if ((state->state & EXTENT_DELALLOC) && (*bits & EXTENT_DELALLOC)) {
struct btrfs_root *root = BTRFS_I(inode)->root;
+ u64 len = state->end + 1 - state->start;
- if (bits & EXTENT_DO_ACCOUNTING) {
- spin_lock(&BTRFS_I(inode)->accounting_lock);
- WARN_ON(!BTRFS_I(inode)->outstanding_extents);
- BTRFS_I(inode)->outstanding_extents--;
- spin_unlock(&BTRFS_I(inode)->accounting_lock);
- btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
- }
+ if (*bits & EXTENT_FIRST_DELALLOC)
+ *bits &= ~EXTENT_FIRST_DELALLOC;
+ else if (!(*bits & EXTENT_DO_ACCOUNTING))
+ atomic_dec(&BTRFS_I(inode)->outstanding_extents);
+
+ if (*bits & EXTENT_DO_ACCOUNTING)
+ btrfs_delalloc_release_metadata(inode, len);
+
+ if (root->root_key.objectid != BTRFS_DATA_RELOC_TREE_OBJECTID)
+ btrfs_free_reserved_data_space(inode, len);
spin_lock(&root->fs_info->delalloc_lock);
- if (state->end - state->start + 1 >
- root->fs_info->delalloc_bytes) {
- printk(KERN_INFO "btrfs warning: delalloc account "
- "%llu %llu\n",
- (unsigned long long)
- state->end - state->start + 1,
- (unsigned long long)
- root->fs_info->delalloc_bytes);
- btrfs_delalloc_free_space(root, inode, (u64)-1);
- root->fs_info->delalloc_bytes = 0;
- BTRFS_I(inode)->delalloc_bytes = 0;
- } else {
- btrfs_delalloc_free_space(root, inode,
- state->end -
- state->start + 1);
- root->fs_info->delalloc_bytes -= state->end -
- state->start + 1;
- BTRFS_I(inode)->delalloc_bytes -= state->end -
- state->start + 1;
- }
+ root->fs_info->delalloc_bytes -= len;
+ BTRFS_I(inode)->delalloc_bytes -= len;
+
if (BTRFS_I(inode)->delalloc_bytes == 0 &&
!list_empty(&BTRFS_I(inode)->delalloc_inodes)) {
list_del_init(&BTRFS_I(inode)->delalloc_inodes);
@@ -1384,7 +1385,8 @@
*/
static int __btrfs_submit_bio_start(struct inode *inode, int rw,
struct bio *bio, int mirror_num,
- unsigned long bio_flags)
+ unsigned long bio_flags,
+ u64 bio_offset)
{
struct btrfs_root *root = BTRFS_I(inode)->root;
int ret = 0;
@@ -1403,7 +1405,8 @@
* are inserted into the btree
*/
static int __btrfs_submit_bio_done(struct inode *inode, int rw, struct bio *bio,
- int mirror_num, unsigned long bio_flags)
+ int mirror_num, unsigned long bio_flags,
+ u64 bio_offset)
{
struct btrfs_root *root = BTRFS_I(inode)->root;
return btrfs_map_bio(root, rw, bio, mirror_num, 1);
@@ -1414,7 +1417,8 @@
* on write, or reading the csums from the tree before a read
*/
static int btrfs_submit_bio_hook(struct inode *inode, int rw, struct bio *bio,
- int mirror_num, unsigned long bio_flags)
+ int mirror_num, unsigned long bio_flags,
+ u64 bio_offset)
{
struct btrfs_root *root = BTRFS_I(inode)->root;
int ret = 0;
@@ -1439,7 +1443,8 @@
/* we're doing a write, do the async checksumming */
return btrfs_wq_submit_bio(BTRFS_I(inode)->root->fs_info,
inode, rw, bio, mirror_num,
- bio_flags, __btrfs_submit_bio_start,
+ bio_flags, bio_offset,
+ __btrfs_submit_bio_start,
__btrfs_submit_bio_done);
}
@@ -1520,6 +1525,7 @@
goto again;
}
+ BUG();
btrfs_set_extent_delalloc(inode, page_start, page_end, &cached_state);
ClearPageChecked(page);
out:
@@ -1650,7 +1656,7 @@
static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end)
{
struct btrfs_root *root = BTRFS_I(inode)->root;
- struct btrfs_trans_handle *trans;
+ struct btrfs_trans_handle *trans = NULL;
struct btrfs_ordered_extent *ordered_extent = NULL;
struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
struct extent_state *cached_state = NULL;
@@ -1668,9 +1674,10 @@
ret = btrfs_ordered_update_i_size(inode, 0, ordered_extent);
if (!ret) {
trans = btrfs_join_transaction(root, 1);
+ btrfs_set_trans_block_group(trans, inode);
+ trans->block_rsv = &root->fs_info->delalloc_block_rsv;
ret = btrfs_update_inode(trans, root, inode);
BUG_ON(ret);
- btrfs_end_transaction(trans, root);
}
goto out;
}
@@ -1680,6 +1687,8 @@
0, &cached_state, GFP_NOFS);
trans = btrfs_join_transaction(root, 1);
+ btrfs_set_trans_block_group(trans, inode);
+ trans->block_rsv = &root->fs_info->delalloc_block_rsv;
if (test_bit(BTRFS_ORDERED_COMPRESSED, &ordered_extent->flags))
compressed = 1;
@@ -1711,12 +1720,13 @@
add_pending_csums(trans, inode, ordered_extent->file_offset,
&ordered_extent->list);
- /* this also removes the ordered extent from the tree */
btrfs_ordered_update_i_size(inode, 0, ordered_extent);
ret = btrfs_update_inode(trans, root, inode);
BUG_ON(ret);
- btrfs_end_transaction(trans, root);
out:
+ btrfs_delalloc_release_metadata(inode, ordered_extent->len);
+ if (trans)
+ btrfs_end_transaction(trans, root);
/* once for us */
btrfs_put_ordered_extent(ordered_extent);
/* once for the tree */
@@ -1838,7 +1848,7 @@
BTRFS_I(inode)->io_tree.ops->submit_bio_hook(inode, rw, bio,
failrec->last_mirror,
- failrec->bio_flags);
+ failrec->bio_flags, 0);
return 0;
}
@@ -1993,32 +2003,196 @@
}
/*
+ * calculate extra metadata reservation when snapshotting a subvolume
+ * contains orphan files.
+ */
+void btrfs_orphan_pre_snapshot(struct btrfs_trans_handle *trans,
+ struct btrfs_pending_snapshot *pending,
+ u64 *bytes_to_reserve)
+{
+ struct btrfs_root *root;
+ struct btrfs_block_rsv *block_rsv;
+ u64 num_bytes;
+ int index;
+
+ root = pending->root;
+ if (!root->orphan_block_rsv || list_empty(&root->orphan_list))
+ return;
+
+ block_rsv = root->orphan_block_rsv;
+
+ /* orphan block reservation for the snapshot */
+ num_bytes = block_rsv->size;
+
+ /*
+ * after the snapshot is created, COWing tree blocks may use more
+ * space than it frees. So we should make sure there is enough
+ * reserved space.
+ */
+ index = trans->transid & 0x1;
+ if (block_rsv->reserved + block_rsv->freed[index] < block_rsv->size) {
+ num_bytes += block_rsv->size -
+ (block_rsv->reserved + block_rsv->freed[index]);
+ }
+
+ *bytes_to_reserve += num_bytes;
+}
+
+void btrfs_orphan_post_snapshot(struct btrfs_trans_handle *trans,
+ struct btrfs_pending_snapshot *pending)
+{
+ struct btrfs_root *root = pending->root;
+ struct btrfs_root *snap = pending->snap;
+ struct btrfs_block_rsv *block_rsv;
+ u64 num_bytes;
+ int index;
+ int ret;
+
+ if (!root->orphan_block_rsv || list_empty(&root->orphan_list))
+ return;
+
+ /* refill source subvolume's orphan block reservation */
+ block_rsv = root->orphan_block_rsv;
+ index = trans->transid & 0x1;
+ if (block_rsv->reserved + block_rsv->freed[index] < block_rsv->size) {
+ num_bytes = block_rsv->size -
+ (block_rsv->reserved + block_rsv->freed[index]);
+ ret = btrfs_block_rsv_migrate(&pending->block_rsv,
+ root->orphan_block_rsv,
+ num_bytes);
+ BUG_ON(ret);
+ }
+
+ /* setup orphan block reservation for the snapshot */
+ block_rsv = btrfs_alloc_block_rsv(snap);
+ BUG_ON(!block_rsv);
+
+ btrfs_add_durable_block_rsv(root->fs_info, block_rsv);
+ snap->orphan_block_rsv = block_rsv;
+
+ num_bytes = root->orphan_block_rsv->size;
+ ret = btrfs_block_rsv_migrate(&pending->block_rsv,
+ block_rsv, num_bytes);
+ BUG_ON(ret);
+
+#if 0
+ /* insert orphan item for the snapshot */
+ WARN_ON(!root->orphan_item_inserted);
+ ret = btrfs_insert_orphan_item(trans, root->fs_info->tree_root,
+ snap->root_key.objectid);
+ BUG_ON(ret);
+ snap->orphan_item_inserted = 1;
+#endif
+}
+
+enum btrfs_orphan_cleanup_state {
+ ORPHAN_CLEANUP_STARTED = 1,
+ ORPHAN_CLEANUP_DONE = 2,
+};
+
+/*
+ * This is called in transaction commmit time. If there are no orphan
+ * files in the subvolume, it removes orphan item and frees block_rsv
+ * structure.
+ */
+void btrfs_orphan_commit_root(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root)
+{
+ int ret;
+
+ if (!list_empty(&root->orphan_list) ||
+ root->orphan_cleanup_state != ORPHAN_CLEANUP_DONE)
+ return;
+
+ if (root->orphan_item_inserted &&
+ btrfs_root_refs(&root->root_item) > 0) {
+ ret = btrfs_del_orphan_item(trans, root->fs_info->tree_root,
+ root->root_key.objectid);
+ BUG_ON(ret);
+ root->orphan_item_inserted = 0;
+ }
+
+ if (root->orphan_block_rsv) {
+ WARN_ON(root->orphan_block_rsv->size > 0);
+ btrfs_free_block_rsv(root, root->orphan_block_rsv);
+ root->orphan_block_rsv = NULL;
+ }
+}
+
+/*
* This creates an orphan entry for the given inode in case something goes
* wrong in the middle of an unlink/truncate.
+ *
+ * NOTE: caller of this function should reserve 5 units of metadata for
+ * this function.
*/
int btrfs_orphan_add(struct btrfs_trans_handle *trans, struct inode *inode)
{
struct btrfs_root *root = BTRFS_I(inode)->root;
- int ret = 0;
+ struct btrfs_block_rsv *block_rsv = NULL;
+ int reserve = 0;
+ int insert = 0;
+ int ret;
- spin_lock(&root->list_lock);
-
- /* already on the orphan list, we're good */
- if (!list_empty(&BTRFS_I(inode)->i_orphan)) {
- spin_unlock(&root->list_lock);
- return 0;
+ if (!root->orphan_block_rsv) {
+ block_rsv = btrfs_alloc_block_rsv(root);
+ BUG_ON(!block_rsv);
}
- list_add(&BTRFS_I(inode)->i_orphan, &root->orphan_list);
+ spin_lock(&root->orphan_lock);
+ if (!root->orphan_block_rsv) {
+ root->orphan_block_rsv = block_rsv;
+ } else if (block_rsv) {
+ btrfs_free_block_rsv(root, block_rsv);
+ block_rsv = NULL;
+ }
- spin_unlock(&root->list_lock);
+ if (list_empty(&BTRFS_I(inode)->i_orphan)) {
+ list_add(&BTRFS_I(inode)->i_orphan, &root->orphan_list);
+#if 0
+ /*
+ * For proper ENOSPC handling, we should do orphan
+ * cleanup when mounting. But this introduces backward
+ * compatibility issue.
+ */
+ if (!xchg(&root->orphan_item_inserted, 1))
+ insert = 2;
+ else
+ insert = 1;
+#endif
+ insert = 1;
+ } else {
+ WARN_ON(!BTRFS_I(inode)->orphan_meta_reserved);
+ }
- /*
- * insert an orphan item to track this unlinked/truncated file
- */
- ret = btrfs_insert_orphan_item(trans, root, inode->i_ino);
+ if (!BTRFS_I(inode)->orphan_meta_reserved) {
+ BTRFS_I(inode)->orphan_meta_reserved = 1;
+ reserve = 1;
+ }
+ spin_unlock(&root->orphan_lock);
- return ret;
+ if (block_rsv)
+ btrfs_add_durable_block_rsv(root->fs_info, block_rsv);
+
+ /* grab metadata reservation from transaction handle */
+ if (reserve) {
+ ret = btrfs_orphan_reserve_metadata(trans, inode);
+ BUG_ON(ret);
+ }
+
+ /* insert an orphan item to track this unlinked/truncated file */
+ if (insert >= 1) {
+ ret = btrfs_insert_orphan_item(trans, root, inode->i_ino);
+ BUG_ON(ret);
+ }
+
+ /* insert an orphan item to track subvolume contains orphan files */
+ if (insert >= 2) {
+ ret = btrfs_insert_orphan_item(trans, root->fs_info->tree_root,
+ root->root_key.objectid);
+ BUG_ON(ret);
+ }
+ return 0;
}
/*
@@ -2028,26 +2202,31 @@
int btrfs_orphan_del(struct btrfs_trans_handle *trans, struct inode *inode)
{
struct btrfs_root *root = BTRFS_I(inode)->root;
+ int delete_item = 0;
+ int release_rsv = 0;
int ret = 0;
- spin_lock(&root->list_lock);
-
- if (list_empty(&BTRFS_I(inode)->i_orphan)) {
- spin_unlock(&root->list_lock);
- return 0;
+ spin_lock(&root->orphan_lock);
+ if (!list_empty(&BTRFS_I(inode)->i_orphan)) {
+ list_del_init(&BTRFS_I(inode)->i_orphan);
+ delete_item = 1;
}
- list_del_init(&BTRFS_I(inode)->i_orphan);
- if (!trans) {
- spin_unlock(&root->list_lock);
- return 0;
+ if (BTRFS_I(inode)->orphan_meta_reserved) {
+ BTRFS_I(inode)->orphan_meta_reserved = 0;
+ release_rsv = 1;
+ }
+ spin_unlock(&root->orphan_lock);
+
+ if (trans && delete_item) {
+ ret = btrfs_del_orphan_item(trans, root, inode->i_ino);
+ BUG_ON(ret);
}
- spin_unlock(&root->list_lock);
+ if (release_rsv)
+ btrfs_orphan_release_metadata(inode);
- ret = btrfs_del_orphan_item(trans, root, inode->i_ino);
-
- return ret;
+ return 0;
}
/*
@@ -2064,7 +2243,7 @@
struct inode *inode;
int ret = 0, nr_unlink = 0, nr_truncate = 0;
- if (!xchg(&root->clean_orphans, 0))
+ if (cmpxchg(&root->orphan_cleanup_state, 0, ORPHAN_CLEANUP_STARTED))
return;
path = btrfs_alloc_path();
@@ -2117,16 +2296,15 @@
found_key.type = BTRFS_INODE_ITEM_KEY;
found_key.offset = 0;
inode = btrfs_iget(root->fs_info->sb, &found_key, root, NULL);
- if (IS_ERR(inode))
- break;
+ BUG_ON(IS_ERR(inode));
/*
* add this inode to the orphan list so btrfs_orphan_del does
* the proper thing when we hit it
*/
- spin_lock(&root->list_lock);
+ spin_lock(&root->orphan_lock);
list_add(&BTRFS_I(inode)->i_orphan, &root->orphan_list);
- spin_unlock(&root->list_lock);
+ spin_unlock(&root->orphan_lock);
/*
* if this is a bad inode, means we actually succeeded in
@@ -2135,7 +2313,7 @@
* do a destroy_inode
*/
if (is_bad_inode(inode)) {
- trans = btrfs_start_transaction(root, 1);
+ trans = btrfs_start_transaction(root, 0);
btrfs_orphan_del(trans, inode);
btrfs_end_transaction(trans, root);
iput(inode);
@@ -2153,13 +2331,23 @@
/* this will do delete_inode and everything for us */
iput(inode);
}
+ btrfs_free_path(path);
+
+ root->orphan_cleanup_state = ORPHAN_CLEANUP_DONE;
+
+ if (root->orphan_block_rsv)
+ btrfs_block_rsv_release(root, root->orphan_block_rsv,
+ (u64)-1);
+
+ if (root->orphan_block_rsv || root->orphan_item_inserted) {
+ trans = btrfs_join_transaction(root, 1);
+ btrfs_end_transaction(trans, root);
+ }
if (nr_unlink)
printk(KERN_INFO "btrfs: unlinked %d orphans\n", nr_unlink);
if (nr_truncate)
printk(KERN_INFO "btrfs: truncated %d orphans\n", nr_truncate);
-
- btrfs_free_path(path);
}
/*
@@ -2478,29 +2666,201 @@
return ret;
}
+/* helper to check if there is any shared block in the path */
+static int check_path_shared(struct btrfs_root *root,
+ struct btrfs_path *path)
+{
+ struct extent_buffer *eb;
+ int level;
+ int ret;
+ u64 refs = 1;
+
+ for (level = 0; level < BTRFS_MAX_LEVEL; level++) {
+ if (!path->nodes[level])
+ break;
+ eb = path->nodes[level];
+ if (!btrfs_block_can_be_shared(root, eb))
+ continue;
+ ret = btrfs_lookup_extent_info(NULL, root, eb->start, eb->len,
+ &refs, NULL);
+ if (refs > 1)
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * helper to start transaction for unlink and rmdir.
+ *
+ * unlink and rmdir are special in btrfs, they do not always free space.
+ * so in enospc case, we should make sure they will free space before
+ * allowing them to use the global metadata reservation.
+ */
+static struct btrfs_trans_handle *__unlink_start_trans(struct inode *dir,
+ struct dentry *dentry)
+{
+ struct btrfs_trans_handle *trans;
+ struct btrfs_root *root = BTRFS_I(dir)->root;
+ struct btrfs_path *path;
+ struct btrfs_inode_ref *ref;
+ struct btrfs_dir_item *di;
+ struct inode *inode = dentry->d_inode;
+ u64 index;
+ int check_link = 1;
+ int err = -ENOSPC;
+ int ret;
+
+ trans = btrfs_start_transaction(root, 10);
+ if (!IS_ERR(trans) || PTR_ERR(trans) != -ENOSPC)
+ return trans;
+
+ if (inode->i_ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID)
+ return ERR_PTR(-ENOSPC);
+
+ /* check if there is someone else holds reference */
+ if (S_ISDIR(inode->i_mode) && atomic_read(&inode->i_count) > 1)
+ return ERR_PTR(-ENOSPC);
+
+ if (atomic_read(&inode->i_count) > 2)
+ return ERR_PTR(-ENOSPC);
+
+ if (xchg(&root->fs_info->enospc_unlink, 1))
+ return ERR_PTR(-ENOSPC);
+
+ path = btrfs_alloc_path();
+ if (!path) {
+ root->fs_info->enospc_unlink = 0;
+ return ERR_PTR(-ENOMEM);
+ }
+
+ trans = btrfs_start_transaction(root, 0);
+ if (IS_ERR(trans)) {
+ btrfs_free_path(path);
+ root->fs_info->enospc_unlink = 0;
+ return trans;
+ }
+
+ path->skip_locking = 1;
+ path->search_commit_root = 1;
+
+ ret = btrfs_lookup_inode(trans, root, path,
+ &BTRFS_I(dir)->location, 0);
+ if (ret < 0) {
+ err = ret;
+ goto out;
+ }
+ if (ret == 0) {
+ if (check_path_shared(root, path))
+ goto out;
+ } else {
+ check_link = 0;
+ }
+ btrfs_release_path(root, path);
+
+ ret = btrfs_lookup_inode(trans, root, path,
+ &BTRFS_I(inode)->location, 0);
+ if (ret < 0) {
+ err = ret;
+ goto out;
+ }
+ if (ret == 0) {
+ if (check_path_shared(root, path))
+ goto out;
+ } else {
+ check_link = 0;
+ }
+ btrfs_release_path(root, path);
+
+ if (ret == 0 && S_ISREG(inode->i_mode)) {
+ ret = btrfs_lookup_file_extent(trans, root, path,
+ inode->i_ino, (u64)-1, 0);
+ if (ret < 0) {
+ err = ret;
+ goto out;
+ }
+ BUG_ON(ret == 0);
+ if (check_path_shared(root, path))
+ goto out;
+ btrfs_release_path(root, path);
+ }
+
+ if (!check_link) {
+ err = 0;
+ goto out;
+ }
+
+ di = btrfs_lookup_dir_item(trans, root, path, dir->i_ino,
+ dentry->d_name.name, dentry->d_name.len, 0);
+ if (IS_ERR(di)) {
+ err = PTR_ERR(di);
+ goto out;
+ }
+ if (di) {
+ if (check_path_shared(root, path))
+ goto out;
+ } else {
+ err = 0;
+ goto out;
+ }
+ btrfs_release_path(root, path);
+
+ ref = btrfs_lookup_inode_ref(trans, root, path,
+ dentry->d_name.name, dentry->d_name.len,
+ inode->i_ino, dir->i_ino, 0);
+ if (IS_ERR(ref)) {
+ err = PTR_ERR(ref);
+ goto out;
+ }
+ BUG_ON(!ref);
+ if (check_path_shared(root, path))
+ goto out;
+ index = btrfs_inode_ref_index(path->nodes[0], ref);
+ btrfs_release_path(root, path);
+
+ di = btrfs_lookup_dir_index_item(trans, root, path, dir->i_ino, index,
+ dentry->d_name.name, dentry->d_name.len, 0);
+ if (IS_ERR(di)) {
+ err = PTR_ERR(di);
+ goto out;
+ }
+ BUG_ON(ret == -ENOENT);
+ if (check_path_shared(root, path))
+ goto out;
+
+ err = 0;
+out:
+ btrfs_free_path(path);
+ if (err) {
+ btrfs_end_transaction(trans, root);
+ root->fs_info->enospc_unlink = 0;
+ return ERR_PTR(err);
+ }
+
+ trans->block_rsv = &root->fs_info->global_block_rsv;
+ return trans;
+}
+
+static void __unlink_end_trans(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root)
+{
+ if (trans->block_rsv == &root->fs_info->global_block_rsv) {
+ BUG_ON(!root->fs_info->enospc_unlink);
+ root->fs_info->enospc_unlink = 0;
+ }
+ btrfs_end_transaction_throttle(trans, root);
+}
+
static int btrfs_unlink(struct inode *dir, struct dentry *dentry)
{
- struct btrfs_root *root;
+ struct btrfs_root *root = BTRFS_I(dir)->root;
struct btrfs_trans_handle *trans;
struct inode *inode = dentry->d_inode;
int ret;
unsigned long nr = 0;
- root = BTRFS_I(dir)->root;
-
- /*
- * 5 items for unlink inode
- * 1 for orphan
- */
- ret = btrfs_reserve_metadata_space(root, 6);
- if (ret)
- return ret;
-
- trans = btrfs_start_transaction(root, 1);
- if (IS_ERR(trans)) {
- btrfs_unreserve_metadata_space(root, 6);
+ trans = __unlink_start_trans(dir, dentry);
+ if (IS_ERR(trans))
return PTR_ERR(trans);
- }
btrfs_set_trans_block_group(trans, dir);
@@ -2508,14 +2868,15 @@
ret = btrfs_unlink_inode(trans, root, dir, dentry->d_inode,
dentry->d_name.name, dentry->d_name.len);
+ BUG_ON(ret);
- if (inode->i_nlink == 0)
+ if (inode->i_nlink == 0) {
ret = btrfs_orphan_add(trans, inode);
+ BUG_ON(ret);
+ }
nr = trans->blocks_used;
-
- btrfs_end_transaction_throttle(trans, root);
- btrfs_unreserve_metadata_space(root, 6);
+ __unlink_end_trans(trans, root);
btrfs_btree_balance_dirty(root, nr);
return ret;
}
@@ -2587,7 +2948,6 @@
{
struct inode *inode = dentry->d_inode;
int err = 0;
- int ret;
struct btrfs_root *root = BTRFS_I(dir)->root;
struct btrfs_trans_handle *trans;
unsigned long nr = 0;
@@ -2596,15 +2956,9 @@
inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
return -ENOTEMPTY;
- ret = btrfs_reserve_metadata_space(root, 5);
- if (ret)
- return ret;
-
- trans = btrfs_start_transaction(root, 1);
- if (IS_ERR(trans)) {
- btrfs_unreserve_metadata_space(root, 5);
+ trans = __unlink_start_trans(dir, dentry);
+ if (IS_ERR(trans))
return PTR_ERR(trans);
- }
btrfs_set_trans_block_group(trans, dir);
@@ -2627,12 +2981,9 @@
btrfs_i_size_write(inode, 0);
out:
nr = trans->blocks_used;
- ret = btrfs_end_transaction_throttle(trans, root);
- btrfs_unreserve_metadata_space(root, 5);
+ __unlink_end_trans(trans, root);
btrfs_btree_balance_dirty(root, nr);
- if (ret && !err)
- err = ret;
return err;
}
@@ -3029,6 +3380,7 @@
if (pending_del_nr) {
ret = btrfs_del_items(trans, root, path, pending_del_slot,
pending_del_nr);
+ BUG_ON(ret);
}
btrfs_free_path(path);
return err;
@@ -3056,11 +3408,7 @@
if ((offset & (blocksize - 1)) == 0)
goto out;
- ret = btrfs_check_data_free_space(root, inode, PAGE_CACHE_SIZE);
- if (ret)
- goto out;
-
- ret = btrfs_reserve_metadata_for_delalloc(root, inode, 1);
+ ret = btrfs_delalloc_reserve_space(inode, PAGE_CACHE_SIZE);
if (ret)
goto out;
@@ -3068,8 +3416,7 @@
again:
page = grab_cache_page(mapping, index);
if (!page) {
- btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
- btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
+ btrfs_delalloc_release_space(inode, PAGE_CACHE_SIZE);
goto out;
}
@@ -3132,8 +3479,7 @@
out_unlock:
if (ret)
- btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
- btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
+ btrfs_delalloc_release_space(inode, PAGE_CACHE_SIZE);
unlock_page(page);
page_cache_release(page);
out:
@@ -3145,7 +3491,7 @@
struct btrfs_trans_handle *trans;
struct btrfs_root *root = BTRFS_I(inode)->root;
struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
- struct extent_map *em;
+ struct extent_map *em = NULL;
struct extent_state *cached_state = NULL;
u64 mask = root->sectorsize - 1;
u64 hole_start = (inode->i_size + mask) & ~mask;
@@ -3183,11 +3529,11 @@
u64 hint_byte = 0;
hole_size = last_byte - cur_offset;
- err = btrfs_reserve_metadata_space(root, 2);
- if (err)
+ trans = btrfs_start_transaction(root, 2);
+ if (IS_ERR(trans)) {
+ err = PTR_ERR(trans);
break;
-
- trans = btrfs_start_transaction(root, 1);
+ }
btrfs_set_trans_block_group(trans, inode);
err = btrfs_drop_extents(trans, inode, cur_offset,
@@ -3205,14 +3551,15 @@
last_byte - 1, 0);
btrfs_end_transaction(trans, root);
- btrfs_unreserve_metadata_space(root, 2);
}
free_extent_map(em);
+ em = NULL;
cur_offset = last_byte;
if (cur_offset >= block_end)
break;
}
+ free_extent_map(em);
unlock_extent_cached(io_tree, hole_start, block_end - 1, &cached_state,
GFP_NOFS);
return err;
@@ -3239,11 +3586,10 @@
}
}
- ret = btrfs_reserve_metadata_space(root, 1);
- if (ret)
- return ret;
+ trans = btrfs_start_transaction(root, 5);
+ if (IS_ERR(trans))
+ return PTR_ERR(trans);
- trans = btrfs_start_transaction(root, 1);
btrfs_set_trans_block_group(trans, inode);
ret = btrfs_orphan_add(trans, inode);
@@ -3251,7 +3597,6 @@
nr = trans->blocks_used;
btrfs_end_transaction(trans, root);
- btrfs_unreserve_metadata_space(root, 1);
btrfs_btree_balance_dirty(root, nr);
if (attr->ia_size > inode->i_size) {
@@ -3264,8 +3609,11 @@
i_size_write(inode, attr->ia_size);
btrfs_ordered_update_i_size(inode, inode->i_size, NULL);
- trans = btrfs_start_transaction(root, 1);
+ trans = btrfs_start_transaction(root, 0);
+ BUG_ON(IS_ERR(trans));
btrfs_set_trans_block_group(trans, inode);
+ trans->block_rsv = root->orphan_block_rsv;
+ BUG_ON(!trans->block_rsv);
ret = btrfs_update_inode(trans, root, inode);
BUG_ON(ret);
@@ -3345,10 +3693,21 @@
btrfs_i_size_write(inode, 0);
while (1) {
- trans = btrfs_start_transaction(root, 1);
+ trans = btrfs_start_transaction(root, 0);
+ BUG_ON(IS_ERR(trans));
btrfs_set_trans_block_group(trans, inode);
- ret = btrfs_truncate_inode_items(trans, root, inode, 0, 0);
+ trans->block_rsv = root->orphan_block_rsv;
+ ret = btrfs_block_rsv_check(trans, root,
+ root->orphan_block_rsv, 0, 5);
+ if (ret) {
+ BUG_ON(ret != -EAGAIN);
+ ret = btrfs_commit_transaction(trans, root);
+ BUG_ON(ret);
+ continue;
+ }
+
+ ret = btrfs_truncate_inode_items(trans, root, inode, 0, 0);
if (ret != -EAGAIN)
break;
@@ -3356,6 +3715,7 @@
btrfs_end_transaction(trans, root);
trans = NULL;
btrfs_btree_balance_dirty(root, nr);
+
}
if (ret == 0) {
@@ -3596,40 +3956,10 @@
return 0;
}
-static noinline void init_btrfs_i(struct inode *inode)
-{
- struct btrfs_inode *bi = BTRFS_I(inode);
-
- bi->generation = 0;
- bi->sequence = 0;
- bi->last_trans = 0;
- bi->last_sub_trans = 0;
- bi->logged_trans = 0;
- bi->delalloc_bytes = 0;
- bi->reserved_bytes = 0;
- bi->disk_i_size = 0;
- bi->flags = 0;
- bi->index_cnt = (u64)-1;
- bi->last_unlink_trans = 0;
- bi->ordered_data_close = 0;
- bi->force_compress = 0;
- extent_map_tree_init(&BTRFS_I(inode)->extent_tree, GFP_NOFS);
- extent_io_tree_init(&BTRFS_I(inode)->io_tree,
- inode->i_mapping, GFP_NOFS);
- extent_io_tree_init(&BTRFS_I(inode)->io_failure_tree,
- inode->i_mapping, GFP_NOFS);
- INIT_LIST_HEAD(&BTRFS_I(inode)->delalloc_inodes);
- INIT_LIST_HEAD(&BTRFS_I(inode)->ordered_operations);
- RB_CLEAR_NODE(&BTRFS_I(inode)->rb_node);
- btrfs_ordered_inode_tree_init(&BTRFS_I(inode)->ordered_tree);
- mutex_init(&BTRFS_I(inode)->log_mutex);
-}
-
static int btrfs_init_locked_inode(struct inode *inode, void *p)
{
struct btrfs_iget_args *args = p;
inode->i_ino = args->ino;
- init_btrfs_i(inode);
BTRFS_I(inode)->root = args->root;
btrfs_set_inode_space_info(args->root, inode);
return 0;
@@ -3692,8 +4022,6 @@
if (!inode)
return ERR_PTR(-ENOMEM);
- init_btrfs_i(inode);
-
BTRFS_I(inode)->root = root;
memcpy(&BTRFS_I(inode)->location, key, sizeof(*key));
BTRFS_I(inode)->dummy_inode = 1;
@@ -3950,7 +4278,7 @@
struct btrfs_trans_handle *trans;
int ret = 0;
- if (root->fs_info->btree_inode == inode)
+ if (BTRFS_I(inode)->dummy_inode)
return 0;
if (wbc->sync_mode == WB_SYNC_ALL) {
@@ -3971,10 +4299,38 @@
{
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_trans_handle *trans;
+ int ret;
+
+ if (BTRFS_I(inode)->dummy_inode)
+ return;
trans = btrfs_join_transaction(root, 1);
btrfs_set_trans_block_group(trans, inode);
- btrfs_update_inode(trans, root, inode);
+
+ ret = btrfs_update_inode(trans, root, inode);
+ if (ret && ret == -ENOSPC) {
+ /* whoops, lets try again with the full transaction */
+ btrfs_end_transaction(trans, root);
+ trans = btrfs_start_transaction(root, 1);
+ if (IS_ERR(trans)) {
+ if (printk_ratelimit()) {
+ printk(KERN_ERR "btrfs: fail to "
+ "dirty inode %lu error %ld\n",
+ inode->i_ino, PTR_ERR(trans));
+ }
+ return;
+ }
+ btrfs_set_trans_block_group(trans, inode);
+
+ ret = btrfs_update_inode(trans, root, inode);
+ if (ret) {
+ if (printk_ratelimit()) {
+ printk(KERN_ERR "btrfs: fail to "
+ "dirty inode %lu error %d\n",
+ inode->i_ino, ret);
+ }
+ }
+ }
btrfs_end_transaction(trans, root);
}
@@ -4092,7 +4448,6 @@
* btrfs_get_inode_index_count has an explanation for the magic
* number
*/
- init_btrfs_i(inode);
BTRFS_I(inode)->index_cnt = 2;
BTRFS_I(inode)->root = root;
BTRFS_I(inode)->generation = trans->transid;
@@ -4247,26 +4602,21 @@
if (!new_valid_dev(rdev))
return -EINVAL;
+ err = btrfs_find_free_objectid(NULL, root, dir->i_ino, &objectid);
+ if (err)
+ return err;
+
/*
* 2 for inode item and ref
* 2 for dir items
* 1 for xattr if selinux is on
*/
- err = btrfs_reserve_metadata_space(root, 5);
- if (err)
- return err;
+ trans = btrfs_start_transaction(root, 5);
+ if (IS_ERR(trans))
+ return PTR_ERR(trans);
- trans = btrfs_start_transaction(root, 1);
- if (!trans)
- goto fail;
btrfs_set_trans_block_group(trans, dir);
- err = btrfs_find_free_objectid(trans, root, dir->i_ino, &objectid);
- if (err) {
- err = -ENOSPC;
- goto out_unlock;
- }
-
inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
dentry->d_name.len,
dentry->d_parent->d_inode->i_ino, objectid,
@@ -4295,13 +4645,11 @@
out_unlock:
nr = trans->blocks_used;
btrfs_end_transaction_throttle(trans, root);
-fail:
- btrfs_unreserve_metadata_space(root, 5);
+ btrfs_btree_balance_dirty(root, nr);
if (drop_inode) {
inode_dec_link_count(inode);
iput(inode);
}
- btrfs_btree_balance_dirty(root, nr);
return err;
}
@@ -4311,32 +4659,26 @@
struct btrfs_trans_handle *trans;
struct btrfs_root *root = BTRFS_I(dir)->root;
struct inode *inode = NULL;
- int err;
int drop_inode = 0;
+ int err;
unsigned long nr = 0;
u64 objectid;
u64 index = 0;
+ err = btrfs_find_free_objectid(NULL, root, dir->i_ino, &objectid);
+ if (err)
+ return err;
/*
* 2 for inode item and ref
* 2 for dir items
* 1 for xattr if selinux is on
*/
- err = btrfs_reserve_metadata_space(root, 5);
- if (err)
- return err;
+ trans = btrfs_start_transaction(root, 5);
+ if (IS_ERR(trans))
+ return PTR_ERR(trans);
- trans = btrfs_start_transaction(root, 1);
- if (!trans)
- goto fail;
btrfs_set_trans_block_group(trans, dir);
- err = btrfs_find_free_objectid(trans, root, dir->i_ino, &objectid);
- if (err) {
- err = -ENOSPC;
- goto out_unlock;
- }
-
inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
dentry->d_name.len,
dentry->d_parent->d_inode->i_ino,
@@ -4368,8 +4710,6 @@
out_unlock:
nr = trans->blocks_used;
btrfs_end_transaction_throttle(trans, root);
-fail:
- btrfs_unreserve_metadata_space(root, 5);
if (drop_inode) {
inode_dec_link_count(inode);
iput(inode);
@@ -4396,21 +4736,21 @@
if (root->objectid != BTRFS_I(inode)->root->objectid)
return -EPERM;
- /*
- * 1 item for inode ref
- * 2 items for dir items
- */
- err = btrfs_reserve_metadata_space(root, 3);
- if (err)
- return err;
-
btrfs_inc_nlink(inode);
err = btrfs_set_inode_index(dir, &index);
if (err)
goto fail;
- trans = btrfs_start_transaction(root, 1);
+ /*
+ * 1 item for inode ref
+ * 2 items for dir items
+ */
+ trans = btrfs_start_transaction(root, 3);
+ if (IS_ERR(trans)) {
+ err = PTR_ERR(trans);
+ goto fail;
+ }
btrfs_set_trans_block_group(trans, dir);
atomic_inc(&inode->i_count);
@@ -4429,7 +4769,6 @@
nr = trans->blocks_used;
btrfs_end_transaction_throttle(trans, root);
fail:
- btrfs_unreserve_metadata_space(root, 3);
if (drop_inode) {
inode_dec_link_count(inode);
iput(inode);
@@ -4449,28 +4788,20 @@
u64 index = 0;
unsigned long nr = 1;
+ err = btrfs_find_free_objectid(NULL, root, dir->i_ino, &objectid);
+ if (err)
+ return err;
+
/*
* 2 items for inode and ref
* 2 items for dir items
* 1 for xattr if selinux is on
*/
- err = btrfs_reserve_metadata_space(root, 5);
- if (err)
- return err;
-
- trans = btrfs_start_transaction(root, 1);
- if (!trans) {
- err = -ENOMEM;
- goto out_unlock;
- }
+ trans = btrfs_start_transaction(root, 5);
+ if (IS_ERR(trans))
+ return PTR_ERR(trans);
btrfs_set_trans_block_group(trans, dir);
- err = btrfs_find_free_objectid(trans, root, dir->i_ino, &objectid);
- if (err) {
- err = -ENOSPC;
- goto out_fail;
- }
-
inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
dentry->d_name.len,
dentry->d_parent->d_inode->i_ino, objectid,
@@ -4510,9 +4841,6 @@
out_fail:
nr = trans->blocks_used;
btrfs_end_transaction_throttle(trans, root);
-
-out_unlock:
- btrfs_unreserve_metadata_space(root, 5);
if (drop_on_err)
iput(inode);
btrfs_btree_balance_dirty(root, nr);
@@ -4770,6 +5098,7 @@
}
flush_dcache_page(page);
} else if (create && PageUptodate(page)) {
+ WARN_ON(1);
if (!trans) {
kunmap(page);
free_extent_map(em);
@@ -4866,11 +5195,651 @@
return em;
}
+static struct extent_map *btrfs_new_extent_direct(struct inode *inode,
+ u64 start, u64 len)
+{
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ struct btrfs_trans_handle *trans;
+ struct extent_map *em;
+ struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
+ struct btrfs_key ins;
+ u64 alloc_hint;
+ int ret;
+
+ btrfs_drop_extent_cache(inode, start, start + len - 1, 0);
+
+ trans = btrfs_join_transaction(root, 0);
+ if (!trans)
+ return ERR_PTR(-ENOMEM);
+
+ trans->block_rsv = &root->fs_info->delalloc_block_rsv;
+
+ alloc_hint = get_extent_allocation_hint(inode, start, len);
+ ret = btrfs_reserve_extent(trans, root, len, root->sectorsize, 0,
+ alloc_hint, (u64)-1, &ins, 1);
+ if (ret) {
+ em = ERR_PTR(ret);
+ goto out;
+ }
+
+ em = alloc_extent_map(GFP_NOFS);
+ if (!em) {
+ em = ERR_PTR(-ENOMEM);
+ goto out;
+ }
+
+ em->start = start;
+ em->orig_start = em->start;
+ em->len = ins.offset;
+
+ em->block_start = ins.objectid;
+ em->block_len = ins.offset;
+ em->bdev = root->fs_info->fs_devices->latest_bdev;
+ set_bit(EXTENT_FLAG_PINNED, &em->flags);
+
+ while (1) {
+ write_lock(&em_tree->lock);
+ ret = add_extent_mapping(em_tree, em);
+ write_unlock(&em_tree->lock);
+ if (ret != -EEXIST)
+ break;
+ btrfs_drop_extent_cache(inode, start, start + em->len - 1, 0);
+ }
+
+ ret = btrfs_add_ordered_extent_dio(inode, start, ins.objectid,
+ ins.offset, ins.offset, 0);
+ if (ret) {
+ btrfs_free_reserved_extent(root, ins.objectid, ins.offset);
+ em = ERR_PTR(ret);
+ }
+out:
+ btrfs_end_transaction(trans, root);
+ return em;
+}
+
+/*
+ * returns 1 when the nocow is safe, < 1 on error, 0 if the
+ * block must be cow'd
+ */
+static noinline int can_nocow_odirect(struct btrfs_trans_handle *trans,
+ struct inode *inode, u64 offset, u64 len)
+{
+ struct btrfs_path *path;
+ int ret;
+ struct extent_buffer *leaf;
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ struct btrfs_file_extent_item *fi;
+ struct btrfs_key key;
+ u64 disk_bytenr;
+ u64 backref_offset;
+ u64 extent_end;
+ u64 num_bytes;
+ int slot;
+ int found_type;
+
+ path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
+
+ ret = btrfs_lookup_file_extent(trans, root, path, inode->i_ino,
+ offset, 0);
+ if (ret < 0)
+ goto out;
+
+ slot = path->slots[0];
+ if (ret == 1) {
+ if (slot == 0) {
+ /* can't find the item, must cow */
+ ret = 0;
+ goto out;
+ }
+ slot--;
+ }
+ ret = 0;
+ leaf = path->nodes[0];
+ btrfs_item_key_to_cpu(leaf, &key, slot);
+ if (key.objectid != inode->i_ino ||
+ key.type != BTRFS_EXTENT_DATA_KEY) {
+ /* not our file or wrong item type, must cow */
+ goto out;
+ }
+
+ if (key.offset > offset) {
+ /* Wrong offset, must cow */
+ goto out;
+ }
+
+ fi = btrfs_item_ptr(leaf, slot, struct btrfs_file_extent_item);
+ found_type = btrfs_file_extent_type(leaf, fi);
+ if (found_type != BTRFS_FILE_EXTENT_REG &&
+ found_type != BTRFS_FILE_EXTENT_PREALLOC) {
+ /* not a regular extent, must cow */
+ goto out;
+ }
+ disk_bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
+ backref_offset = btrfs_file_extent_offset(leaf, fi);
+
+ extent_end = key.offset + btrfs_file_extent_num_bytes(leaf, fi);
+ if (extent_end < offset + len) {
+ /* extent doesn't include our full range, must cow */
+ goto out;
+ }
+
+ if (btrfs_extent_readonly(root, disk_bytenr))
+ goto out;
+
+ /*
+ * look for other files referencing this extent, if we
+ * find any we must cow
+ */
+ if (btrfs_cross_ref_exist(trans, root, inode->i_ino,
+ key.offset - backref_offset, disk_bytenr))
+ goto out;
+
+ /*
+ * adjust disk_bytenr and num_bytes to cover just the bytes
+ * in this extent we are about to write. If there
+ * are any csums in that range we have to cow in order
+ * to keep the csums correct
+ */
+ disk_bytenr += backref_offset;
+ disk_bytenr += offset - key.offset;
+ num_bytes = min(offset + len, extent_end) - offset;
+ if (csum_exist_in_range(root, disk_bytenr, num_bytes))
+ goto out;
+ /*
+ * all of the above have passed, it is safe to overwrite this extent
+ * without cow
+ */
+ ret = 1;
+out:
+ btrfs_free_path(path);
+ return ret;
+}
+
+static int btrfs_get_blocks_direct(struct inode *inode, sector_t iblock,
+ struct buffer_head *bh_result, int create)
+{
+ struct extent_map *em;
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ u64 start = iblock << inode->i_blkbits;
+ u64 len = bh_result->b_size;
+ struct btrfs_trans_handle *trans;
+
+ em = btrfs_get_extent(inode, NULL, 0, start, len, 0);
+ if (IS_ERR(em))
+ return PTR_ERR(em);
+
+ /*
+ * Ok for INLINE and COMPRESSED extents we need to fallback on buffered
+ * io. INLINE is special, and we could probably kludge it in here, but
+ * it's still buffered so for safety lets just fall back to the generic
+ * buffered path.
+ *
+ * For COMPRESSED we _have_ to read the entire extent in so we can
+ * decompress it, so there will be buffering required no matter what we
+ * do, so go ahead and fallback to buffered.
+ *
+ * We return -ENOTBLK because thats what makes DIO go ahead and go back
+ * to buffered IO. Don't blame me, this is the price we pay for using
+ * the generic code.
+ */
+ if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags) ||
+ em->block_start == EXTENT_MAP_INLINE) {
+ free_extent_map(em);
+ return -ENOTBLK;
+ }
+
+ /* Just a good old fashioned hole, return */
+ if (!create && (em->block_start == EXTENT_MAP_HOLE ||
+ test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) {
+ free_extent_map(em);
+ /* DIO will do one hole at a time, so just unlock a sector */
+ unlock_extent(&BTRFS_I(inode)->io_tree, start,
+ start + root->sectorsize - 1, GFP_NOFS);
+ return 0;
+ }
+
+ /*
+ * We don't allocate a new extent in the following cases
+ *
+ * 1) The inode is marked as NODATACOW. In this case we'll just use the
+ * existing extent.
+ * 2) The extent is marked as PREALLOC. We're good to go here and can
+ * just use the extent.
+ *
+ */
+ if (!create) {
+ len = em->len - (start - em->start);
+ goto map;
+ }
+
+ if (test_bit(EXTENT_FLAG_PREALLOC, &em->flags) ||
+ ((BTRFS_I(inode)->flags & BTRFS_INODE_NODATACOW) &&
+ em->block_start != EXTENT_MAP_HOLE)) {
+ int type;
+ int ret;
+ u64 block_start;
+
+ if (test_bit(EXTENT_FLAG_PREALLOC, &em->flags))
+ type = BTRFS_ORDERED_PREALLOC;
+ else
+ type = BTRFS_ORDERED_NOCOW;
+ len = min(len, em->len - (start - em->start));
+ block_start = em->block_start + (start - em->start);
+
+ /*
+ * we're not going to log anything, but we do need
+ * to make sure the current transaction stays open
+ * while we look for nocow cross refs
+ */
+ trans = btrfs_join_transaction(root, 0);
+ if (!trans)
+ goto must_cow;
+
+ if (can_nocow_odirect(trans, inode, start, len) == 1) {
+ ret = btrfs_add_ordered_extent_dio(inode, start,
+ block_start, len, len, type);
+ btrfs_end_transaction(trans, root);
+ if (ret) {
+ free_extent_map(em);
+ return ret;
+ }
+ goto unlock;
+ }
+ btrfs_end_transaction(trans, root);
+ }
+must_cow:
+ /*
+ * this will cow the extent, reset the len in case we changed
+ * it above
+ */
+ len = bh_result->b_size;
+ free_extent_map(em);
+ em = btrfs_new_extent_direct(inode, start, len);
+ if (IS_ERR(em))
+ return PTR_ERR(em);
+ len = min(len, em->len - (start - em->start));
+unlock:
+ clear_extent_bit(&BTRFS_I(inode)->io_tree, start, start + len - 1,
+ EXTENT_LOCKED | EXTENT_DELALLOC | EXTENT_DIRTY, 1,
+ 0, NULL, GFP_NOFS);
+map:
+ bh_result->b_blocknr = (em->block_start + (start - em->start)) >>
+ inode->i_blkbits;
+ bh_result->b_size = len;
+ bh_result->b_bdev = em->bdev;
+ set_buffer_mapped(bh_result);
+ if (create && !test_bit(EXTENT_FLAG_PREALLOC, &em->flags))
+ set_buffer_new(bh_result);
+
+ free_extent_map(em);
+
+ return 0;
+}
+
+struct btrfs_dio_private {
+ struct inode *inode;
+ u64 logical_offset;
+ u64 disk_bytenr;
+ u64 bytes;
+ u32 *csums;
+ void *private;
+};
+
+static void btrfs_endio_direct_read(struct bio *bio, int err)
+{
+ struct bio_vec *bvec_end = bio->bi_io_vec + bio->bi_vcnt - 1;
+ struct bio_vec *bvec = bio->bi_io_vec;
+ struct btrfs_dio_private *dip = bio->bi_private;
+ struct inode *inode = dip->inode;
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ u64 start;
+ u32 *private = dip->csums;
+
+ start = dip->logical_offset;
+ do {
+ if (!(BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM)) {
+ struct page *page = bvec->bv_page;
+ char *kaddr;
+ u32 csum = ~(u32)0;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ kaddr = kmap_atomic(page, KM_IRQ0);
+ csum = btrfs_csum_data(root, kaddr + bvec->bv_offset,
+ csum, bvec->bv_len);
+ btrfs_csum_final(csum, (char *)&csum);
+ kunmap_atomic(kaddr, KM_IRQ0);
+ local_irq_restore(flags);
+
+ flush_dcache_page(bvec->bv_page);
+ if (csum != *private) {
+ printk(KERN_ERR "btrfs csum failed ino %lu off"
+ " %llu csum %u private %u\n",
+ inode->i_ino, (unsigned long long)start,
+ csum, *private);
+ err = -EIO;
+ }
+ }
+
+ start += bvec->bv_len;
+ private++;
+ bvec++;
+ } while (bvec <= bvec_end);
+
+ unlock_extent(&BTRFS_I(inode)->io_tree, dip->logical_offset,
+ dip->logical_offset + dip->bytes - 1, GFP_NOFS);
+ bio->bi_private = dip->private;
+
+ kfree(dip->csums);
+ kfree(dip);
+ dio_end_io(bio, err);
+}
+
+static void btrfs_endio_direct_write(struct bio *bio, int err)
+{
+ struct btrfs_dio_private *dip = bio->bi_private;
+ struct inode *inode = dip->inode;
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ struct btrfs_trans_handle *trans;
+ struct btrfs_ordered_extent *ordered = NULL;
+ struct extent_state *cached_state = NULL;
+ int ret;
+
+ if (err)
+ goto out_done;
+
+ ret = btrfs_dec_test_ordered_pending(inode, &ordered,
+ dip->logical_offset, dip->bytes);
+ if (!ret)
+ goto out_done;
+
+ BUG_ON(!ordered);
+
+ trans = btrfs_join_transaction(root, 1);
+ if (!trans) {
+ err = -ENOMEM;
+ goto out;
+ }
+ trans->block_rsv = &root->fs_info->delalloc_block_rsv;
+
+ if (test_bit(BTRFS_ORDERED_NOCOW, &ordered->flags)) {
+ ret = btrfs_ordered_update_i_size(inode, 0, ordered);
+ if (!ret)
+ ret = btrfs_update_inode(trans, root, inode);
+ err = ret;
+ goto out;
+ }
+
+ lock_extent_bits(&BTRFS_I(inode)->io_tree, ordered->file_offset,
+ ordered->file_offset + ordered->len - 1, 0,
+ &cached_state, GFP_NOFS);
+
+ if (test_bit(BTRFS_ORDERED_PREALLOC, &ordered->flags)) {
+ ret = btrfs_mark_extent_written(trans, inode,
+ ordered->file_offset,
+ ordered->file_offset +
+ ordered->len);
+ if (ret) {
+ err = ret;
+ goto out_unlock;
+ }
+ } else {
+ ret = insert_reserved_file_extent(trans, inode,
+ ordered->file_offset,
+ ordered->start,
+ ordered->disk_len,
+ ordered->len,
+ ordered->len,
+ 0, 0, 0,
+ BTRFS_FILE_EXTENT_REG);
+ unpin_extent_cache(&BTRFS_I(inode)->extent_tree,
+ ordered->file_offset, ordered->len);
+ if (ret) {
+ err = ret;
+ WARN_ON(1);
+ goto out_unlock;
+ }
+ }
+
+ add_pending_csums(trans, inode, ordered->file_offset, &ordered->list);
+ btrfs_ordered_update_i_size(inode, 0, ordered);
+ btrfs_update_inode(trans, root, inode);
+out_unlock:
+ unlock_extent_cached(&BTRFS_I(inode)->io_tree, ordered->file_offset,
+ ordered->file_offset + ordered->len - 1,
+ &cached_state, GFP_NOFS);
+out:
+ btrfs_delalloc_release_metadata(inode, ordered->len);
+ btrfs_end_transaction(trans, root);
+ btrfs_put_ordered_extent(ordered);
+ btrfs_put_ordered_extent(ordered);
+out_done:
+ bio->bi_private = dip->private;
+
+ kfree(dip->csums);
+ kfree(dip);
+ dio_end_io(bio, err);
+}
+
+static int __btrfs_submit_bio_start_direct_io(struct inode *inode, int rw,
+ struct bio *bio, int mirror_num,
+ unsigned long bio_flags, u64 offset)
+{
+ int ret;
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ ret = btrfs_csum_one_bio(root, inode, bio, offset, 1);
+ BUG_ON(ret);
+ return 0;
+}
+
+static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode,
+ loff_t file_offset)
+{
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ struct btrfs_dio_private *dip;
+ struct bio_vec *bvec = bio->bi_io_vec;
+ u64 start;
+ int skip_sum;
+ int write = rw & (1 << BIO_RW);
+ int ret = 0;
+
+ skip_sum = BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM;
+
+ dip = kmalloc(sizeof(*dip), GFP_NOFS);
+ if (!dip) {
+ ret = -ENOMEM;
+ goto free_ordered;
+ }
+ dip->csums = NULL;
+
+ if (!skip_sum) {
+ dip->csums = kmalloc(sizeof(u32) * bio->bi_vcnt, GFP_NOFS);
+ if (!dip->csums) {
+ ret = -ENOMEM;
+ goto free_ordered;
+ }
+ }
+
+ dip->private = bio->bi_private;
+ dip->inode = inode;
+ dip->logical_offset = file_offset;
+
+ start = dip->logical_offset;
+ dip->bytes = 0;
+ do {
+ dip->bytes += bvec->bv_len;
+ bvec++;
+ } while (bvec <= (bio->bi_io_vec + bio->bi_vcnt - 1));
+
+ dip->disk_bytenr = (u64)bio->bi_sector << 9;
+ bio->bi_private = dip;
+
+ if (write)
+ bio->bi_end_io = btrfs_endio_direct_write;
+ else
+ bio->bi_end_io = btrfs_endio_direct_read;
+
+ ret = btrfs_bio_wq_end_io(root->fs_info, bio, 0);
+ if (ret)
+ goto out_err;
+
+ if (write && !skip_sum) {
+ ret = btrfs_wq_submit_bio(BTRFS_I(inode)->root->fs_info,
+ inode, rw, bio, 0, 0,
+ dip->logical_offset,
+ __btrfs_submit_bio_start_direct_io,
+ __btrfs_submit_bio_done);
+ if (ret)
+ goto out_err;
+ return;
+ } else if (!skip_sum)
+ btrfs_lookup_bio_sums_dio(root, inode, bio,
+ dip->logical_offset, dip->csums);
+
+ ret = btrfs_map_bio(root, rw, bio, 0, 1);
+ if (ret)
+ goto out_err;
+ return;
+out_err:
+ kfree(dip->csums);
+ kfree(dip);
+free_ordered:
+ /*
+ * If this is a write, we need to clean up the reserved space and kill
+ * the ordered extent.
+ */
+ if (write) {
+ struct btrfs_ordered_extent *ordered;
+ ordered = btrfs_lookup_ordered_extent(inode,
+ dip->logical_offset);
+ if (!test_bit(BTRFS_ORDERED_PREALLOC, &ordered->flags) &&
+ !test_bit(BTRFS_ORDERED_NOCOW, &ordered->flags))
+ btrfs_free_reserved_extent(root, ordered->start,
+ ordered->disk_len);
+ btrfs_put_ordered_extent(ordered);
+ btrfs_put_ordered_extent(ordered);
+ }
+ bio_endio(bio, ret);
+}
+
+static ssize_t check_direct_IO(struct btrfs_root *root, int rw, struct kiocb *iocb,
+ const struct iovec *iov, loff_t offset,
+ unsigned long nr_segs)
+{
+ int seg;
+ size_t size;
+ unsigned long addr;
+ unsigned blocksize_mask = root->sectorsize - 1;
+ ssize_t retval = -EINVAL;
+ loff_t end = offset;
+
+ if (offset & blocksize_mask)
+ goto out;
+
+ /* Check the memory alignment. Blocks cannot straddle pages */
+ for (seg = 0; seg < nr_segs; seg++) {
+ addr = (unsigned long)iov[seg].iov_base;
+ size = iov[seg].iov_len;
+ end += size;
+ if ((addr & blocksize_mask) || (size & blocksize_mask))
+ goto out;
+ }
+ retval = 0;
+out:
+ return retval;
+}
static ssize_t btrfs_direct_IO(int rw, struct kiocb *iocb,
const struct iovec *iov, loff_t offset,
unsigned long nr_segs)
{
- return -EINVAL;
+ struct file *file = iocb->ki_filp;
+ struct inode *inode = file->f_mapping->host;
+ struct btrfs_ordered_extent *ordered;
+ struct extent_state *cached_state = NULL;
+ u64 lockstart, lockend;
+ ssize_t ret;
+ int writing = rw & WRITE;
+ int write_bits = 0;
+ size_t count = iov_length(iov, nr_segs);
+
+ if (check_direct_IO(BTRFS_I(inode)->root, rw, iocb, iov,
+ offset, nr_segs)) {
+ return 0;
+ }
+
+ lockstart = offset;
+ lockend = offset + count - 1;
+
+ if (writing) {
+ ret = btrfs_delalloc_reserve_space(inode, count);
+ if (ret)
+ goto out;
+ }
+
+ while (1) {
+ lock_extent_bits(&BTRFS_I(inode)->io_tree, lockstart, lockend,
+ 0, &cached_state, GFP_NOFS);
+ /*
+ * We're concerned with the entire range that we're going to be
+ * doing DIO to, so we need to make sure theres no ordered
+ * extents in this range.
+ */
+ ordered = btrfs_lookup_ordered_range(inode, lockstart,
+ lockend - lockstart + 1);
+ if (!ordered)
+ break;
+ unlock_extent_cached(&BTRFS_I(inode)->io_tree, lockstart, lockend,
+ &cached_state, GFP_NOFS);
+ btrfs_start_ordered_extent(inode, ordered, 1);
+ btrfs_put_ordered_extent(ordered);
+ cond_resched();
+ }
+
+ /*
+ * we don't use btrfs_set_extent_delalloc because we don't want
+ * the dirty or uptodate bits
+ */
+ if (writing) {
+ write_bits = EXTENT_DELALLOC | EXTENT_DO_ACCOUNTING;
+ ret = set_extent_bit(&BTRFS_I(inode)->io_tree, lockstart, lockend,
+ EXTENT_DELALLOC, 0, NULL, &cached_state,
+ GFP_NOFS);
+ if (ret) {
+ clear_extent_bit(&BTRFS_I(inode)->io_tree, lockstart,
+ lockend, EXTENT_LOCKED | write_bits,
+ 1, 0, &cached_state, GFP_NOFS);
+ goto out;
+ }
+ }
+
+ free_extent_state(cached_state);
+ cached_state = NULL;
+
+ ret = __blockdev_direct_IO(rw, iocb, inode,
+ BTRFS_I(inode)->root->fs_info->fs_devices->latest_bdev,
+ iov, offset, nr_segs, btrfs_get_blocks_direct, NULL,
+ btrfs_submit_direct, 0);
+
+ if (ret < 0 && ret != -EIOCBQUEUED) {
+ clear_extent_bit(&BTRFS_I(inode)->io_tree, offset,
+ offset + iov_length(iov, nr_segs) - 1,
+ EXTENT_LOCKED | write_bits, 1, 0,
+ &cached_state, GFP_NOFS);
+ } else if (ret >= 0 && ret < iov_length(iov, nr_segs)) {
+ /*
+ * We're falling back to buffered, unlock the section we didn't
+ * do IO on.
+ */
+ clear_extent_bit(&BTRFS_I(inode)->io_tree, offset + ret,
+ offset + iov_length(iov, nr_segs) - 1,
+ EXTENT_LOCKED | write_bits, 1, 0,
+ &cached_state, GFP_NOFS);
+ }
+out:
+ free_extent_state(cached_state);
+ return ret;
}
static int btrfs_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
@@ -5034,7 +6003,7 @@
u64 page_start;
u64 page_end;
- ret = btrfs_check_data_free_space(root, inode, PAGE_CACHE_SIZE);
+ ret = btrfs_delalloc_reserve_space(inode, PAGE_CACHE_SIZE);
if (ret) {
if (ret == -ENOMEM)
ret = VM_FAULT_OOM;
@@ -5043,13 +6012,6 @@
goto out;
}
- ret = btrfs_reserve_metadata_for_delalloc(root, inode, 1);
- if (ret) {
- btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
- ret = VM_FAULT_SIGBUS;
- goto out;
- }
-
ret = VM_FAULT_NOPAGE; /* make the VM retry the fault */
again:
lock_page(page);
@@ -5059,7 +6021,6 @@
if ((page->mapping != inode->i_mapping) ||
(page_start >= size)) {
- btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
/* page got truncated out from underneath us */
goto out_unlock;
}
@@ -5100,7 +6061,6 @@
unlock_extent_cached(io_tree, page_start, page_end,
&cached_state, GFP_NOFS);
ret = VM_FAULT_SIGBUS;
- btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
goto out_unlock;
}
ret = 0;
@@ -5127,10 +6087,10 @@
unlock_extent_cached(io_tree, page_start, page_end, &cached_state, GFP_NOFS);
out_unlock:
- btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
if (!ret)
return VM_FAULT_LOCKED;
unlock_page(page);
+ btrfs_delalloc_release_space(inode, PAGE_CACHE_SIZE);
out:
return ret;
}
@@ -5155,8 +6115,10 @@
btrfs_wait_ordered_range(inode, inode->i_size & (~mask), (u64)-1);
btrfs_ordered_update_i_size(inode, inode->i_size, NULL);
- trans = btrfs_start_transaction(root, 1);
+ trans = btrfs_start_transaction(root, 0);
+ BUG_ON(IS_ERR(trans));
btrfs_set_trans_block_group(trans, inode);
+ trans->block_rsv = root->orphan_block_rsv;
/*
* setattr is responsible for setting the ordered_data_close flag,
@@ -5179,6 +6141,23 @@
btrfs_add_ordered_operation(trans, root, inode);
while (1) {
+ if (!trans) {
+ trans = btrfs_start_transaction(root, 0);
+ BUG_ON(IS_ERR(trans));
+ btrfs_set_trans_block_group(trans, inode);
+ trans->block_rsv = root->orphan_block_rsv;
+ }
+
+ ret = btrfs_block_rsv_check(trans, root,
+ root->orphan_block_rsv, 0, 5);
+ if (ret) {
+ BUG_ON(ret != -EAGAIN);
+ ret = btrfs_commit_transaction(trans, root);
+ BUG_ON(ret);
+ trans = NULL;
+ continue;
+ }
+
ret = btrfs_truncate_inode_items(trans, root, inode,
inode->i_size,
BTRFS_EXTENT_DATA_KEY);
@@ -5190,10 +6169,8 @@
nr = trans->blocks_used;
btrfs_end_transaction(trans, root);
+ trans = NULL;
btrfs_btree_balance_dirty(root, nr);
-
- trans = btrfs_start_transaction(root, 1);
- btrfs_set_trans_block_group(trans, inode);
}
if (ret == 0 && inode->i_nlink > 0) {
@@ -5254,21 +6231,47 @@
struct inode *btrfs_alloc_inode(struct super_block *sb)
{
struct btrfs_inode *ei;
+ struct inode *inode;
ei = kmem_cache_alloc(btrfs_inode_cachep, GFP_NOFS);
if (!ei)
return NULL;
+
+ ei->root = NULL;
+ ei->space_info = NULL;
+ ei->generation = 0;
+ ei->sequence = 0;
ei->last_trans = 0;
ei->last_sub_trans = 0;
ei->logged_trans = 0;
- ei->outstanding_extents = 0;
- ei->reserved_extents = 0;
- ei->root = NULL;
+ ei->delalloc_bytes = 0;
+ ei->reserved_bytes = 0;
+ ei->disk_i_size = 0;
+ ei->flags = 0;
+ ei->index_cnt = (u64)-1;
+ ei->last_unlink_trans = 0;
+
spin_lock_init(&ei->accounting_lock);
+ atomic_set(&ei->outstanding_extents, 0);
+ ei->reserved_extents = 0;
+
+ ei->ordered_data_close = 0;
+ ei->orphan_meta_reserved = 0;
+ ei->dummy_inode = 0;
+ ei->force_compress = 0;
+
+ inode = &ei->vfs_inode;
+ extent_map_tree_init(&ei->extent_tree, GFP_NOFS);
+ extent_io_tree_init(&ei->io_tree, &inode->i_data, GFP_NOFS);
+ extent_io_tree_init(&ei->io_failure_tree, &inode->i_data, GFP_NOFS);
+ mutex_init(&ei->log_mutex);
btrfs_ordered_inode_tree_init(&ei->ordered_tree);
INIT_LIST_HEAD(&ei->i_orphan);
+ INIT_LIST_HEAD(&ei->delalloc_inodes);
INIT_LIST_HEAD(&ei->ordered_operations);
- return &ei->vfs_inode;
+ RB_CLEAR_NODE(&ei->rb_node);
+
+ return inode;
}
void btrfs_destroy_inode(struct inode *inode)
@@ -5278,6 +6281,8 @@
WARN_ON(!list_empty(&inode->i_dentry));
WARN_ON(inode->i_data.nrpages);
+ WARN_ON(atomic_read(&BTRFS_I(inode)->outstanding_extents));
+ WARN_ON(BTRFS_I(inode)->reserved_extents);
/*
* This can happen where we create an inode, but somebody else also
@@ -5298,13 +6303,13 @@
spin_unlock(&root->fs_info->ordered_extent_lock);
}
- spin_lock(&root->list_lock);
+ spin_lock(&root->orphan_lock);
if (!list_empty(&BTRFS_I(inode)->i_orphan)) {
printk(KERN_INFO "BTRFS: inode %lu still on the orphan list\n",
inode->i_ino);
list_del_init(&BTRFS_I(inode)->i_orphan);
}
- spin_unlock(&root->list_lock);
+ spin_unlock(&root->orphan_lock);
while (1) {
ordered = btrfs_lookup_first_ordered_extent(inode, (u64)-1);
@@ -5425,19 +6430,6 @@
if (S_ISDIR(old_inode->i_mode) && new_inode &&
new_inode->i_size > BTRFS_EMPTY_DIR_SIZE)
return -ENOTEMPTY;
-
- /*
- * We want to reserve the absolute worst case amount of items. So if
- * both inodes are subvols and we need to unlink them then that would
- * require 4 item modifications, but if they are both normal inodes it
- * would require 5 item modifications, so we'll assume their normal
- * inodes. So 5 * 2 is 10, plus 1 for the new link, so 11 total items
- * should cover the worst case number of items we'll modify.
- */
- ret = btrfs_reserve_metadata_space(root, 11);
- if (ret)
- return ret;
-
/*
* we're using rename to replace one file with another.
* and the replacement file is large. Start IO on it now so
@@ -5450,8 +6442,18 @@
/* close the racy window with snapshot create/destroy ioctl */
if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
down_read(&root->fs_info->subvol_sem);
+ /*
+ * We want to reserve the absolute worst case amount of items. So if
+ * both inodes are subvols and we need to unlink them then that would
+ * require 4 item modifications, but if they are both normal inodes it
+ * would require 5 item modifications, so we'll assume their normal
+ * inodes. So 5 * 2 is 10, plus 1 for the new link, so 11 total items
+ * should cover the worst case number of items we'll modify.
+ */
+ trans = btrfs_start_transaction(root, 20);
+ if (IS_ERR(trans))
+ return PTR_ERR(trans);
- trans = btrfs_start_transaction(root, 1);
btrfs_set_trans_block_group(trans, new_dir);
if (dest != root)
@@ -5550,7 +6552,6 @@
if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
up_read(&root->fs_info->subvol_sem);
- btrfs_unreserve_metadata_space(root, 11);
return ret;
}
@@ -5602,6 +6603,38 @@
return 0;
}
+int btrfs_start_one_delalloc_inode(struct btrfs_root *root, int delay_iput)
+{
+ struct btrfs_inode *binode;
+ struct inode *inode = NULL;
+
+ spin_lock(&root->fs_info->delalloc_lock);
+ while (!list_empty(&root->fs_info->delalloc_inodes)) {
+ binode = list_entry(root->fs_info->delalloc_inodes.next,
+ struct btrfs_inode, delalloc_inodes);
+ inode = igrab(&binode->vfs_inode);
+ if (inode) {
+ list_move_tail(&binode->delalloc_inodes,
+ &root->fs_info->delalloc_inodes);
+ break;
+ }
+
+ list_del_init(&binode->delalloc_inodes);
+ cond_resched_lock(&root->fs_info->delalloc_lock);
+ }
+ spin_unlock(&root->fs_info->delalloc_lock);
+
+ if (inode) {
+ write_inode_now(inode, 0);
+ if (delay_iput)
+ btrfs_add_delayed_iput(inode);
+ else
+ iput(inode);
+ return 1;
+ }
+ return 0;
+}
+
static int btrfs_symlink(struct inode *dir, struct dentry *dentry,
const char *symname)
{
@@ -5625,26 +6658,20 @@
if (name_len > BTRFS_MAX_INLINE_DATA_SIZE(root))
return -ENAMETOOLONG;
+ err = btrfs_find_free_objectid(NULL, root, dir->i_ino, &objectid);
+ if (err)
+ return err;
/*
* 2 items for inode item and ref
* 2 items for dir items
* 1 item for xattr if selinux is on
*/
- err = btrfs_reserve_metadata_space(root, 5);
- if (err)
- return err;
+ trans = btrfs_start_transaction(root, 5);
+ if (IS_ERR(trans))
+ return PTR_ERR(trans);
- trans = btrfs_start_transaction(root, 1);
- if (!trans)
- goto out_fail;
btrfs_set_trans_block_group(trans, dir);
- err = btrfs_find_free_objectid(trans, root, dir->i_ino, &objectid);
- if (err) {
- err = -ENOSPC;
- goto out_unlock;
- }
-
inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
dentry->d_name.len,
dentry->d_parent->d_inode->i_ino, objectid,
@@ -5716,8 +6743,6 @@
out_unlock:
nr = trans->blocks_used;
btrfs_end_transaction_throttle(trans, root);
-out_fail:
- btrfs_unreserve_metadata_space(root, 5);
if (drop_inode) {
inode_dec_link_count(inode);
iput(inode);
@@ -5726,33 +6751,28 @@
return err;
}
-static int prealloc_file_range(struct inode *inode, u64 start, u64 end,
- u64 alloc_hint, int mode, loff_t actual_len)
+int btrfs_prealloc_file_range(struct inode *inode, int mode,
+ u64 start, u64 num_bytes, u64 min_size,
+ loff_t actual_len, u64 *alloc_hint)
{
struct btrfs_trans_handle *trans;
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_key ins;
u64 cur_offset = start;
- u64 num_bytes = end - start;
int ret = 0;
- u64 i_size;
while (num_bytes > 0) {
- trans = btrfs_start_transaction(root, 1);
-
- ret = btrfs_reserve_extent(trans, root, num_bytes,
- root->sectorsize, 0, alloc_hint,
- (u64)-1, &ins, 1);
- if (ret) {
- WARN_ON(1);
- goto stop_trans;
+ trans = btrfs_start_transaction(root, 3);
+ if (IS_ERR(trans)) {
+ ret = PTR_ERR(trans);
+ break;
}
- ret = btrfs_reserve_metadata_space(root, 3);
+ ret = btrfs_reserve_extent(trans, root, num_bytes, min_size,
+ 0, *alloc_hint, (u64)-1, &ins, 1);
if (ret) {
- btrfs_free_reserved_extent(root, ins.objectid,
- ins.offset);
- goto stop_trans;
+ btrfs_end_transaction(trans, root);
+ break;
}
ret = insert_reserved_file_extent(trans, inode,
@@ -5766,34 +6786,27 @@
num_bytes -= ins.offset;
cur_offset += ins.offset;
- alloc_hint = ins.objectid + ins.offset;
+ *alloc_hint = ins.objectid + ins.offset;
inode->i_ctime = CURRENT_TIME;
BTRFS_I(inode)->flags |= BTRFS_INODE_PREALLOC;
if (!(mode & FALLOC_FL_KEEP_SIZE) &&
- (actual_len > inode->i_size) &&
- (cur_offset > inode->i_size)) {
-
+ (actual_len > inode->i_size) &&
+ (cur_offset > inode->i_size)) {
if (cur_offset > actual_len)
- i_size = actual_len;
+ i_size_write(inode, actual_len);
else
- i_size = cur_offset;
- i_size_write(inode, i_size);
- btrfs_ordered_update_i_size(inode, i_size, NULL);
+ i_size_write(inode, cur_offset);
+ i_size_write(inode, cur_offset);
+ btrfs_ordered_update_i_size(inode, cur_offset, NULL);
}
ret = btrfs_update_inode(trans, root, inode);
BUG_ON(ret);
btrfs_end_transaction(trans, root);
- btrfs_unreserve_metadata_space(root, 3);
}
return ret;
-
-stop_trans:
- btrfs_end_transaction(trans, root);
- return ret;
-
}
static long btrfs_fallocate(struct inode *inode, int mode,
@@ -5826,8 +6839,7 @@
goto out;
}
- ret = btrfs_check_data_free_space(BTRFS_I(inode)->root, inode,
- alloc_end - alloc_start);
+ ret = btrfs_check_data_free_space(inode, alloc_end - alloc_start);
if (ret)
goto out;
@@ -5872,16 +6884,16 @@
if (em->block_start == EXTENT_MAP_HOLE ||
(cur_offset >= inode->i_size &&
!test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) {
- ret = prealloc_file_range(inode,
- cur_offset, last_byte,
- alloc_hint, mode, offset+len);
+ ret = btrfs_prealloc_file_range(inode, mode, cur_offset,
+ last_byte - cur_offset,
+ 1 << inode->i_blkbits,
+ offset + len,
+ &alloc_hint);
if (ret < 0) {
free_extent_map(em);
break;
}
}
- if (em->block_start <= EXTENT_MAP_LAST_BYTE)
- alloc_hint = em->block_start;
free_extent_map(em);
cur_offset = last_byte;
@@ -5893,8 +6905,7 @@
unlock_extent_cached(&BTRFS_I(inode)->io_tree, alloc_start, locked_end,
&cached_state, GFP_NOFS);
- btrfs_free_reserved_data_space(BTRFS_I(inode)->root, inode,
- alloc_end - alloc_start);
+ btrfs_free_reserved_data_space(inode, alloc_end - alloc_start);
out:
mutex_unlock(&inode->i_mutex);
return ret;
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 97a9783..9254b3d 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -239,23 +239,19 @@
u64 new_dirid = BTRFS_FIRST_FREE_OBJECTID;
u64 index = 0;
+ ret = btrfs_find_free_objectid(NULL, root->fs_info->tree_root,
+ 0, &objectid);
+ if (ret)
+ return ret;
/*
* 1 - inode item
* 2 - refs
* 1 - root item
* 2 - dir items
*/
- ret = btrfs_reserve_metadata_space(root, 6);
- if (ret)
- return ret;
-
- trans = btrfs_start_transaction(root, 1);
- BUG_ON(!trans);
-
- ret = btrfs_find_free_objectid(trans, root->fs_info->tree_root,
- 0, &objectid);
- if (ret)
- goto fail;
+ trans = btrfs_start_transaction(root, 6);
+ if (IS_ERR(trans))
+ return PTR_ERR(trans);
leaf = btrfs_alloc_free_block(trans, root, root->leafsize,
0, objectid, NULL, 0, 0, 0);
@@ -345,13 +341,10 @@
err = btrfs_commit_transaction(trans, root);
if (err && !ret)
ret = err;
-
- btrfs_unreserve_metadata_space(root, 6);
return ret;
}
-static int create_snapshot(struct btrfs_root *root, struct dentry *dentry,
- char *name, int namelen)
+static int create_snapshot(struct btrfs_root *root, struct dentry *dentry)
{
struct inode *inode;
struct btrfs_pending_snapshot *pending_snapshot;
@@ -361,40 +354,33 @@
if (!root->ref_cows)
return -EINVAL;
- /*
- * 1 - inode item
- * 2 - refs
- * 1 - root item
- * 2 - dir items
- */
- ret = btrfs_reserve_metadata_space(root, 6);
+ pending_snapshot = kzalloc(sizeof(*pending_snapshot), GFP_NOFS);
+ if (!pending_snapshot)
+ return -ENOMEM;
+
+ btrfs_init_block_rsv(&pending_snapshot->block_rsv);
+ pending_snapshot->dentry = dentry;
+ pending_snapshot->root = root;
+
+ trans = btrfs_start_transaction(root->fs_info->extent_root, 5);
+ if (IS_ERR(trans)) {
+ ret = PTR_ERR(trans);
+ goto fail;
+ }
+
+ ret = btrfs_snap_reserve_metadata(trans, pending_snapshot);
+ BUG_ON(ret);
+
+ list_add(&pending_snapshot->list,
+ &trans->transaction->pending_snapshots);
+ ret = btrfs_commit_transaction(trans, root->fs_info->extent_root);
+ BUG_ON(ret);
+
+ ret = pending_snapshot->error;
if (ret)
goto fail;
- pending_snapshot = kzalloc(sizeof(*pending_snapshot), GFP_NOFS);
- if (!pending_snapshot) {
- ret = -ENOMEM;
- btrfs_unreserve_metadata_space(root, 6);
- goto fail;
- }
- pending_snapshot->name = kmalloc(namelen + 1, GFP_NOFS);
- if (!pending_snapshot->name) {
- ret = -ENOMEM;
- kfree(pending_snapshot);
- btrfs_unreserve_metadata_space(root, 6);
- goto fail;
- }
- memcpy(pending_snapshot->name, name, namelen);
- pending_snapshot->name[namelen] = '\0';
- pending_snapshot->dentry = dentry;
- trans = btrfs_start_transaction(root, 1);
- BUG_ON(!trans);
- pending_snapshot->root = root;
- list_add(&pending_snapshot->list,
- &trans->transaction->pending_snapshots);
- ret = btrfs_commit_transaction(trans, root);
- BUG_ON(ret);
- btrfs_unreserve_metadata_space(root, 6);
+ btrfs_orphan_cleanup(pending_snapshot->snap);
inode = btrfs_lookup_dentry(dentry->d_parent->d_inode, dentry);
if (IS_ERR(inode)) {
@@ -405,6 +391,7 @@
d_instantiate(dentry, inode);
ret = 0;
fail:
+ kfree(pending_snapshot);
return ret;
}
@@ -456,8 +443,7 @@
goto out_up_read;
if (snap_src) {
- error = create_snapshot(snap_src, dentry,
- name, namelen);
+ error = create_snapshot(snap_src, dentry);
} else {
error = create_subvol(BTRFS_I(dir)->root, dentry,
name, namelen);
@@ -601,19 +587,9 @@
if (range->flags & BTRFS_DEFRAG_RANGE_COMPRESS)
BTRFS_I(inode)->force_compress = 1;
- ret = btrfs_check_data_free_space(root, inode, PAGE_CACHE_SIZE);
- if (ret) {
- ret = -ENOSPC;
- break;
- }
-
- ret = btrfs_reserve_metadata_for_delalloc(root, inode, 1);
- if (ret) {
- btrfs_free_reserved_data_space(root, inode,
- PAGE_CACHE_SIZE);
- ret = -ENOSPC;
- break;
- }
+ ret = btrfs_delalloc_reserve_space(inode, PAGE_CACHE_SIZE);
+ if (ret)
+ goto err_unlock;
again:
if (inode->i_size == 0 ||
i > ((inode->i_size - 1) >> PAGE_CACHE_SHIFT)) {
@@ -622,8 +598,10 @@
}
page = grab_cache_page(inode->i_mapping, i);
- if (!page)
+ if (!page) {
+ ret = -ENOMEM;
goto err_reservations;
+ }
if (!PageUptodate(page)) {
btrfs_readpage(NULL, page);
@@ -631,6 +609,7 @@
if (!PageUptodate(page)) {
unlock_page(page);
page_cache_release(page);
+ ret = -EIO;
goto err_reservations;
}
}
@@ -644,8 +623,7 @@
wait_on_page_writeback(page);
if (PageDirty(page)) {
- btrfs_free_reserved_data_space(root, inode,
- PAGE_CACHE_SIZE);
+ btrfs_delalloc_release_space(inode, PAGE_CACHE_SIZE);
goto loop_unlock;
}
@@ -683,7 +661,6 @@
page_cache_release(page);
mutex_unlock(&inode->i_mutex);
- btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
balance_dirty_pages_ratelimited_nr(inode->i_mapping, 1);
i++;
}
@@ -713,9 +690,9 @@
return 0;
err_reservations:
+ btrfs_delalloc_release_space(inode, PAGE_CACHE_SIZE);
+err_unlock:
mutex_unlock(&inode->i_mutex);
- btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
- btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
return ret;
}
@@ -811,7 +788,7 @@
device->name, (unsigned long long)new_size);
if (new_size > old_size) {
- trans = btrfs_start_transaction(root, 1);
+ trans = btrfs_start_transaction(root, 0);
ret = btrfs_grow_device(trans, device, new_size);
btrfs_commit_transaction(trans, root);
} else {
@@ -1300,7 +1277,13 @@
if (err)
goto out_up_write;
- trans = btrfs_start_transaction(root, 1);
+ trans = btrfs_start_transaction(root, 0);
+ if (IS_ERR(trans)) {
+ err = PTR_ERR(trans);
+ goto out_up_write;
+ }
+ trans->block_rsv = &root->fs_info->global_block_rsv;
+
ret = btrfs_unlink_subvol(trans, root, dir,
dest->root_key.objectid,
dentry->d_name.name,
@@ -1314,10 +1297,12 @@
dest->root_item.drop_level = 0;
btrfs_set_root_refs(&dest->root_item, 0);
- ret = btrfs_insert_orphan_item(trans,
- root->fs_info->tree_root,
- dest->root_key.objectid);
- BUG_ON(ret);
+ if (!xchg(&dest->orphan_item_inserted, 1)) {
+ ret = btrfs_insert_orphan_item(trans,
+ root->fs_info->tree_root,
+ dest->root_key.objectid);
+ BUG_ON(ret);
+ }
ret = btrfs_commit_transaction(trans, root);
BUG_ON(ret);
@@ -1358,8 +1343,10 @@
ret = -EPERM;
goto out;
}
- btrfs_defrag_root(root, 0);
- btrfs_defrag_root(root->fs_info->extent_root, 0);
+ ret = btrfs_defrag_root(root, 0);
+ if (ret)
+ goto out;
+ ret = btrfs_defrag_root(root->fs_info->extent_root, 0);
break;
case S_IFREG:
if (!(file->f_mode & FMODE_WRITE)) {
@@ -1389,9 +1376,11 @@
/* the rest are all set to zero by kzalloc */
range->len = (u64)-1;
}
- btrfs_defrag_file(file, range);
+ ret = btrfs_defrag_file(file, range);
kfree(range);
break;
+ default:
+ ret = -EINVAL;
}
out:
mnt_drop_write(file->f_path.mnt);
@@ -1469,7 +1458,7 @@
*/
/* the destination must be opened for writing */
- if (!(file->f_mode & FMODE_WRITE))
+ if (!(file->f_mode & FMODE_WRITE) || (file->f_flags & O_APPEND))
return -EINVAL;
ret = mnt_want_write(file->f_path.mnt);
@@ -1522,7 +1511,7 @@
/* determine range to clone */
ret = -EINVAL;
- if (off >= src->i_size || off + len > src->i_size)
+ if (off + len > src->i_size || off + len < off)
goto out_unlock;
if (len == 0)
olen = len = src->i_size - off;
@@ -1550,12 +1539,6 @@
btrfs_wait_ordered_range(src, off, off+len);
}
- trans = btrfs_start_transaction(root, 1);
- BUG_ON(!trans);
-
- /* punch hole in destination first */
- btrfs_drop_extents(trans, inode, off, off + len, &hint_byte, 1);
-
/* clone data */
key.objectid = src->i_ino;
key.type = BTRFS_EXTENT_DATA_KEY;
@@ -1566,7 +1549,7 @@
* note the key will change type as we walk through the
* tree.
*/
- ret = btrfs_search_slot(trans, root, &key, path, 0, 0);
+ ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
if (ret < 0)
goto out;
@@ -1595,6 +1578,7 @@
u64 disko = 0, diskl = 0;
u64 datao = 0, datal = 0;
u8 comp;
+ u64 endoff;
size = btrfs_item_size_nr(leaf, slot);
read_extent_buffer(leaf, buf,
@@ -1629,12 +1613,31 @@
new_key.objectid = inode->i_ino;
new_key.offset = key.offset + destoff - off;
+ trans = btrfs_start_transaction(root, 1);
+ if (IS_ERR(trans)) {
+ ret = PTR_ERR(trans);
+ goto out;
+ }
+
if (type == BTRFS_FILE_EXTENT_REG ||
type == BTRFS_FILE_EXTENT_PREALLOC) {
+ if (off > key.offset) {
+ datao += off - key.offset;
+ datal -= off - key.offset;
+ }
+
+ if (key.offset + datal > off + len)
+ datal = off + len - key.offset;
+
+ ret = btrfs_drop_extents(trans, inode,
+ new_key.offset,
+ new_key.offset + datal,
+ &hint_byte, 1);
+ BUG_ON(ret);
+
ret = btrfs_insert_empty_item(trans, root, path,
&new_key, size);
- if (ret)
- goto out;
+ BUG_ON(ret);
leaf = path->nodes[0];
slot = path->slots[0];
@@ -1645,14 +1648,6 @@
extent = btrfs_item_ptr(leaf, slot,
struct btrfs_file_extent_item);
- if (off > key.offset) {
- datao += off - key.offset;
- datal -= off - key.offset;
- }
-
- if (key.offset + datal > off + len)
- datal = off + len - key.offset;
-
/* disko == 0 means it's a hole */
if (!disko)
datao = 0;
@@ -1683,14 +1678,21 @@
if (comp && (skip || trim)) {
ret = -EINVAL;
+ btrfs_end_transaction(trans, root);
goto out;
}
size -= skip + trim;
datal -= skip + trim;
+
+ ret = btrfs_drop_extents(trans, inode,
+ new_key.offset,
+ new_key.offset + datal,
+ &hint_byte, 1);
+ BUG_ON(ret);
+
ret = btrfs_insert_empty_item(trans, root, path,
&new_key, size);
- if (ret)
- goto out;
+ BUG_ON(ret);
if (skip) {
u32 start =
@@ -1708,8 +1710,26 @@
}
btrfs_mark_buffer_dirty(leaf);
- }
+ btrfs_release_path(root, path);
+ inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+
+ /*
+ * we round up to the block size at eof when
+ * determining which extents to clone above,
+ * but shouldn't round up the file size
+ */
+ endoff = new_key.offset + datal;
+ if (endoff > off+olen)
+ endoff = off+olen;
+ if (endoff > inode->i_size)
+ btrfs_i_size_write(inode, endoff);
+
+ BTRFS_I(inode)->flags = BTRFS_I(src)->flags;
+ ret = btrfs_update_inode(trans, root, inode);
+ BUG_ON(ret);
+ btrfs_end_transaction(trans, root);
+ }
next:
btrfs_release_path(root, path);
key.offset++;
@@ -1717,17 +1737,7 @@
ret = 0;
out:
btrfs_release_path(root, path);
- if (ret == 0) {
- inode->i_mtime = inode->i_ctime = CURRENT_TIME;
- if (destoff + olen > inode->i_size)
- btrfs_i_size_write(inode, destoff + olen);
- BTRFS_I(inode)->flags = BTRFS_I(src)->flags;
- ret = btrfs_update_inode(trans, root, inode);
- }
- btrfs_end_transaction(trans, root);
unlock_extent(&BTRFS_I(src)->io_tree, off, off+len, GFP_NOFS);
- if (ret)
- vmtruncate(inode, 0);
out_unlock:
mutex_unlock(&src->i_mutex);
mutex_unlock(&inode->i_mutex);
@@ -1845,7 +1855,7 @@
dir_id = btrfs_super_root_dir(&root->fs_info->super_copy);
di = btrfs_lookup_dir_item(trans, root->fs_info->tree_root, path,
dir_id, "default", 7, 1);
- if (!di) {
+ if (IS_ERR_OR_NULL(di)) {
btrfs_free_path(path);
btrfs_end_transaction(trans, root);
printk(KERN_ERR "Umm, you don't have the default dir item, "
diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c
index a127c0e..e56c72b 100644
--- a/fs/btrfs/ordered-data.c
+++ b/fs/btrfs/ordered-data.c
@@ -124,6 +124,15 @@
return 1;
}
+static int range_overlaps(struct btrfs_ordered_extent *entry, u64 file_offset,
+ u64 len)
+{
+ if (file_offset + len <= entry->file_offset ||
+ entry->file_offset + entry->len <= file_offset)
+ return 0;
+ return 1;
+}
+
/*
* look find the first ordered struct that has this offset, otherwise
* the first one less than this offset
@@ -161,8 +170,9 @@
* The tree is given a single reference on the ordered extent that was
* inserted.
*/
-int btrfs_add_ordered_extent(struct inode *inode, u64 file_offset,
- u64 start, u64 len, u64 disk_len, int type)
+static int __btrfs_add_ordered_extent(struct inode *inode, u64 file_offset,
+ u64 start, u64 len, u64 disk_len,
+ int type, int dio)
{
struct btrfs_ordered_inode_tree *tree;
struct rb_node *node;
@@ -182,6 +192,9 @@
if (type != BTRFS_ORDERED_IO_DONE && type != BTRFS_ORDERED_COMPLETE)
set_bit(type, &entry->flags);
+ if (dio)
+ set_bit(BTRFS_ORDERED_DIRECT, &entry->flags);
+
/* one ref for the tree */
atomic_set(&entry->refs, 1);
init_waitqueue_head(&entry->wait);
@@ -203,6 +216,20 @@
return 0;
}
+int btrfs_add_ordered_extent(struct inode *inode, u64 file_offset,
+ u64 start, u64 len, u64 disk_len, int type)
+{
+ return __btrfs_add_ordered_extent(inode, file_offset, start, len,
+ disk_len, type, 0);
+}
+
+int btrfs_add_ordered_extent_dio(struct inode *inode, u64 file_offset,
+ u64 start, u64 len, u64 disk_len, int type)
+{
+ return __btrfs_add_ordered_extent(inode, file_offset, start, len,
+ disk_len, type, 1);
+}
+
/*
* Add a struct btrfs_ordered_sum into the list of checksums to be inserted
* when an ordered extent is finished. If the list covers more than one
@@ -311,13 +338,6 @@
tree->last = NULL;
set_bit(BTRFS_ORDERED_COMPLETE, &entry->flags);
- spin_lock(&BTRFS_I(inode)->accounting_lock);
- WARN_ON(!BTRFS_I(inode)->outstanding_extents);
- BTRFS_I(inode)->outstanding_extents--;
- spin_unlock(&BTRFS_I(inode)->accounting_lock);
- btrfs_unreserve_metadata_for_delalloc(BTRFS_I(inode)->root,
- inode, 1);
-
spin_lock(&root->fs_info->ordered_extent_lock);
list_del_init(&entry->root_extent_list);
@@ -491,7 +511,8 @@
* start IO on any dirty ones so the wait doesn't stall waiting
* for pdflush to find them
*/
- filemap_fdatawrite_range(inode->i_mapping, start, end);
+ if (!test_bit(BTRFS_ORDERED_DIRECT, &entry->flags))
+ filemap_fdatawrite_range(inode->i_mapping, start, end);
if (wait) {
wait_event(entry->wait, test_bit(BTRFS_ORDERED_COMPLETE,
&entry->flags));
@@ -588,6 +609,47 @@
return entry;
}
+/* Since the DIO code tries to lock a wide area we need to look for any ordered
+ * extents that exist in the range, rather than just the start of the range.
+ */
+struct btrfs_ordered_extent *btrfs_lookup_ordered_range(struct inode *inode,
+ u64 file_offset,
+ u64 len)
+{
+ struct btrfs_ordered_inode_tree *tree;
+ struct rb_node *node;
+ struct btrfs_ordered_extent *entry = NULL;
+
+ tree = &BTRFS_I(inode)->ordered_tree;
+ spin_lock(&tree->lock);
+ node = tree_search(tree, file_offset);
+ if (!node) {
+ node = tree_search(tree, file_offset + len);
+ if (!node)
+ goto out;
+ }
+
+ while (1) {
+ entry = rb_entry(node, struct btrfs_ordered_extent, rb_node);
+ if (range_overlaps(entry, file_offset, len))
+ break;
+
+ if (entry->file_offset >= file_offset + len) {
+ entry = NULL;
+ break;
+ }
+ entry = NULL;
+ node = rb_next(node);
+ if (!node)
+ break;
+ }
+out:
+ if (entry)
+ atomic_inc(&entry->refs);
+ spin_unlock(&tree->lock);
+ return entry;
+}
+
/*
* lookup and return any extent before 'file_offset'. NULL is returned
* if none is found
diff --git a/fs/btrfs/ordered-data.h b/fs/btrfs/ordered-data.h
index c82f76a..8ac3654 100644
--- a/fs/btrfs/ordered-data.h
+++ b/fs/btrfs/ordered-data.h
@@ -72,6 +72,8 @@
#define BTRFS_ORDERED_PREALLOC 4 /* set when writing to prealloced extent */
+#define BTRFS_ORDERED_DIRECT 5 /* set when we're doing DIO with this extent */
+
struct btrfs_ordered_extent {
/* logical offset in the file */
u64 file_offset;
@@ -140,7 +142,9 @@
struct btrfs_ordered_extent **cached,
u64 file_offset, u64 io_size);
int btrfs_add_ordered_extent(struct inode *inode, u64 file_offset,
- u64 start, u64 len, u64 disk_len, int tyep);
+ u64 start, u64 len, u64 disk_len, int type);
+int btrfs_add_ordered_extent_dio(struct inode *inode, u64 file_offset,
+ u64 start, u64 len, u64 disk_len, int type);
int btrfs_add_ordered_sum(struct inode *inode,
struct btrfs_ordered_extent *entry,
struct btrfs_ordered_sum *sum);
@@ -151,6 +155,9 @@
int btrfs_wait_ordered_range(struct inode *inode, u64 start, u64 len);
struct btrfs_ordered_extent *
btrfs_lookup_first_ordered_extent(struct inode * inode, u64 file_offset);
+struct btrfs_ordered_extent *btrfs_lookup_ordered_range(struct inode *inode,
+ u64 file_offset,
+ u64 len);
int btrfs_ordered_update_i_size(struct inode *inode, u64 offset,
struct btrfs_ordered_extent *ordered);
int btrfs_find_ordered_sum(struct inode *inode, u64 offset, u64 disk_bytenr, u32 *sum);
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index e558dd9..b37d723 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -44,8 +44,12 @@
struct backref_node {
struct rb_node rb_node;
u64 bytenr;
- /* objectid tree block owner */
+
+ u64 new_bytenr;
+ /* objectid of tree block owner, can be not uptodate */
u64 owner;
+ /* link to pending, changed or detached list */
+ struct list_head list;
/* list of upper level blocks reference this block */
struct list_head upper;
/* list of child blocks in the cache */
@@ -56,9 +60,9 @@
struct extent_buffer *eb;
/* level of tree block */
unsigned int level:8;
- /* 1 if the block is root of old snapshot */
- unsigned int old_root:1;
- /* 1 if no child blocks in the cache */
+ /* is the block in non-reference counted tree */
+ unsigned int cowonly:1;
+ /* 1 if no child node in the cache */
unsigned int lowest:1;
/* is the extent buffer locked */
unsigned int locked:1;
@@ -66,6 +70,16 @@
unsigned int processed:1;
/* have backrefs of this block been checked */
unsigned int checked:1;
+ /*
+ * 1 if corresponding block has been cowed but some upper
+ * level block pointers may not point to the new location
+ */
+ unsigned int pending:1;
+ /*
+ * 1 if the backref node isn't connected to any other
+ * backref node.
+ */
+ unsigned int detached:1;
};
/*
@@ -74,7 +88,6 @@
struct backref_edge {
struct list_head list[2];
struct backref_node *node[2];
- u64 blockptr;
};
#define LOWER 0
@@ -83,9 +96,25 @@
struct backref_cache {
/* red black tree of all backref nodes in the cache */
struct rb_root rb_root;
- /* list of backref nodes with no child block in the cache */
+ /* for passing backref nodes to btrfs_reloc_cow_block */
+ struct backref_node *path[BTRFS_MAX_LEVEL];
+ /*
+ * list of blocks that have been cowed but some block
+ * pointers in upper level blocks may not reflect the
+ * new location
+ */
struct list_head pending[BTRFS_MAX_LEVEL];
- spinlock_t lock;
+ /* list of backref nodes with no child node */
+ struct list_head leaves;
+ /* list of blocks that have been cowed in current transaction */
+ struct list_head changed;
+ /* list of detached backref node. */
+ struct list_head detached;
+
+ u64 last_trans;
+
+ int nr_nodes;
+ int nr_edges;
};
/*
@@ -113,15 +142,6 @@
unsigned int key_ready:1;
};
-/* inode vector */
-#define INODEVEC_SIZE 16
-
-struct inodevec {
- struct list_head list;
- struct inode *inode[INODEVEC_SIZE];
- int nr;
-};
-
#define MAX_EXTENTS 128
struct file_extent_cluster {
@@ -138,36 +158,43 @@
struct btrfs_root *extent_root;
/* inode for moving data */
struct inode *data_inode;
- struct btrfs_workers workers;
+
+ struct btrfs_block_rsv *block_rsv;
+
+ struct backref_cache backref_cache;
+
+ struct file_extent_cluster cluster;
/* tree blocks have been processed */
struct extent_io_tree processed_blocks;
/* map start of tree root to corresponding reloc tree */
struct mapping_tree reloc_root_tree;
/* list of reloc trees */
struct list_head reloc_roots;
+ /* size of metadata reservation for merging reloc trees */
+ u64 merging_rsv_size;
+ /* size of relocated tree nodes */
+ u64 nodes_relocated;
+
u64 search_start;
u64 extents_found;
- u64 extents_skipped;
- int stage;
- int create_reloc_root;
+
+ int block_rsv_retries;
+
+ unsigned int stage:8;
+ unsigned int create_reloc_tree:1;
+ unsigned int merge_reloc_tree:1;
unsigned int found_file_extent:1;
- unsigned int found_old_snapshot:1;
+ unsigned int commit_transaction:1;
};
/* stages of data relocation */
#define MOVE_DATA_EXTENTS 0
#define UPDATE_DATA_PTRS 1
-/*
- * merge reloc tree to corresponding fs tree in worker threads
- */
-struct async_merge {
- struct btrfs_work work;
- struct reloc_control *rc;
- struct btrfs_root *root;
- struct completion *done;
- atomic_t *num_pending;
-};
+static void remove_backref_node(struct backref_cache *cache,
+ struct backref_node *node);
+static void __mark_block_processed(struct reloc_control *rc,
+ struct backref_node *node);
static void mapping_tree_init(struct mapping_tree *tree)
{
@@ -181,15 +208,80 @@
cache->rb_root = RB_ROOT;
for (i = 0; i < BTRFS_MAX_LEVEL; i++)
INIT_LIST_HEAD(&cache->pending[i]);
- spin_lock_init(&cache->lock);
+ INIT_LIST_HEAD(&cache->changed);
+ INIT_LIST_HEAD(&cache->detached);
+ INIT_LIST_HEAD(&cache->leaves);
}
-static void backref_node_init(struct backref_node *node)
+static void backref_cache_cleanup(struct backref_cache *cache)
{
- memset(node, 0, sizeof(*node));
- INIT_LIST_HEAD(&node->upper);
- INIT_LIST_HEAD(&node->lower);
- RB_CLEAR_NODE(&node->rb_node);
+ struct backref_node *node;
+ int i;
+
+ while (!list_empty(&cache->detached)) {
+ node = list_entry(cache->detached.next,
+ struct backref_node, list);
+ remove_backref_node(cache, node);
+ }
+
+ while (!list_empty(&cache->leaves)) {
+ node = list_entry(cache->leaves.next,
+ struct backref_node, lower);
+ remove_backref_node(cache, node);
+ }
+
+ cache->last_trans = 0;
+
+ for (i = 0; i < BTRFS_MAX_LEVEL; i++)
+ BUG_ON(!list_empty(&cache->pending[i]));
+ BUG_ON(!list_empty(&cache->changed));
+ BUG_ON(!list_empty(&cache->detached));
+ BUG_ON(!RB_EMPTY_ROOT(&cache->rb_root));
+ BUG_ON(cache->nr_nodes);
+ BUG_ON(cache->nr_edges);
+}
+
+static struct backref_node *alloc_backref_node(struct backref_cache *cache)
+{
+ struct backref_node *node;
+
+ node = kzalloc(sizeof(*node), GFP_NOFS);
+ if (node) {
+ INIT_LIST_HEAD(&node->list);
+ INIT_LIST_HEAD(&node->upper);
+ INIT_LIST_HEAD(&node->lower);
+ RB_CLEAR_NODE(&node->rb_node);
+ cache->nr_nodes++;
+ }
+ return node;
+}
+
+static void free_backref_node(struct backref_cache *cache,
+ struct backref_node *node)
+{
+ if (node) {
+ cache->nr_nodes--;
+ kfree(node);
+ }
+}
+
+static struct backref_edge *alloc_backref_edge(struct backref_cache *cache)
+{
+ struct backref_edge *edge;
+
+ edge = kzalloc(sizeof(*edge), GFP_NOFS);
+ if (edge)
+ cache->nr_edges++;
+ return edge;
+}
+
+static void free_backref_edge(struct backref_cache *cache,
+ struct backref_edge *edge)
+{
+ if (edge) {
+ cache->nr_edges--;
+ kfree(edge);
+ }
}
static struct rb_node *tree_insert(struct rb_root *root, u64 bytenr,
@@ -250,6 +342,7 @@
edges[idx++] = edge;
node = edge->node[UPPER];
}
+ BUG_ON(node->detached);
*index = idx;
return node;
}
@@ -281,13 +374,18 @@
return NULL;
}
+static void unlock_node_buffer(struct backref_node *node)
+{
+ if (node->locked) {
+ btrfs_tree_unlock(node->eb);
+ node->locked = 0;
+ }
+}
+
static void drop_node_buffer(struct backref_node *node)
{
if (node->eb) {
- if (node->locked) {
- btrfs_tree_unlock(node->eb);
- node->locked = 0;
- }
+ unlock_node_buffer(node);
free_extent_buffer(node->eb);
node->eb = NULL;
}
@@ -296,14 +394,14 @@
static void drop_backref_node(struct backref_cache *tree,
struct backref_node *node)
{
- BUG_ON(!node->lowest);
BUG_ON(!list_empty(&node->upper));
drop_node_buffer(node);
+ list_del(&node->list);
list_del(&node->lower);
-
- rb_erase(&node->rb_node, &tree->rb_root);
- kfree(node);
+ if (!RB_EMPTY_NODE(&node->rb_node))
+ rb_erase(&node->rb_node, &tree->rb_root);
+ free_backref_node(tree, node);
}
/*
@@ -318,27 +416,121 @@
if (!node)
return;
- BUG_ON(!node->lowest);
+ BUG_ON(!node->lowest && !node->detached);
while (!list_empty(&node->upper)) {
edge = list_entry(node->upper.next, struct backref_edge,
list[LOWER]);
upper = edge->node[UPPER];
list_del(&edge->list[LOWER]);
list_del(&edge->list[UPPER]);
- kfree(edge);
+ free_backref_edge(cache, edge);
+
+ if (RB_EMPTY_NODE(&upper->rb_node)) {
+ BUG_ON(!list_empty(&node->upper));
+ drop_backref_node(cache, node);
+ node = upper;
+ node->lowest = 1;
+ continue;
+ }
/*
- * add the node to pending list if no other
+ * add the node to leaf node list if no other
* child block cached.
*/
if (list_empty(&upper->lower)) {
- list_add_tail(&upper->lower,
- &cache->pending[upper->level]);
+ list_add_tail(&upper->lower, &cache->leaves);
upper->lowest = 1;
}
}
+
drop_backref_node(cache, node);
}
+static void update_backref_node(struct backref_cache *cache,
+ struct backref_node *node, u64 bytenr)
+{
+ struct rb_node *rb_node;
+ rb_erase(&node->rb_node, &cache->rb_root);
+ node->bytenr = bytenr;
+ rb_node = tree_insert(&cache->rb_root, node->bytenr, &node->rb_node);
+ BUG_ON(rb_node);
+}
+
+/*
+ * update backref cache after a transaction commit
+ */
+static int update_backref_cache(struct btrfs_trans_handle *trans,
+ struct backref_cache *cache)
+{
+ struct backref_node *node;
+ int level = 0;
+
+ if (cache->last_trans == 0) {
+ cache->last_trans = trans->transid;
+ return 0;
+ }
+
+ if (cache->last_trans == trans->transid)
+ return 0;
+
+ /*
+ * detached nodes are used to avoid unnecessary backref
+ * lookup. transaction commit changes the extent tree.
+ * so the detached nodes are no longer useful.
+ */
+ while (!list_empty(&cache->detached)) {
+ node = list_entry(cache->detached.next,
+ struct backref_node, list);
+ remove_backref_node(cache, node);
+ }
+
+ while (!list_empty(&cache->changed)) {
+ node = list_entry(cache->changed.next,
+ struct backref_node, list);
+ list_del_init(&node->list);
+ BUG_ON(node->pending);
+ update_backref_node(cache, node, node->new_bytenr);
+ }
+
+ /*
+ * some nodes can be left in the pending list if there were
+ * errors during processing the pending nodes.
+ */
+ for (level = 0; level < BTRFS_MAX_LEVEL; level++) {
+ list_for_each_entry(node, &cache->pending[level], list) {
+ BUG_ON(!node->pending);
+ if (node->bytenr == node->new_bytenr)
+ continue;
+ update_backref_node(cache, node, node->new_bytenr);
+ }
+ }
+
+ cache->last_trans = 0;
+ return 1;
+}
+
+static int should_ignore_root(struct btrfs_root *root)
+{
+ struct btrfs_root *reloc_root;
+
+ if (!root->ref_cows)
+ return 0;
+
+ reloc_root = root->reloc_root;
+ if (!reloc_root)
+ return 0;
+
+ if (btrfs_root_last_snapshot(&reloc_root->root_item) ==
+ root->fs_info->running_transaction->transid - 1)
+ return 0;
+ /*
+ * if there is reloc tree and it was created in previous
+ * transaction backref lookup can find the reloc tree,
+ * so backref node for the fs tree root is useless for
+ * relocation.
+ */
+ return 1;
+}
+
/*
* find reloc tree by address of tree root
*/
@@ -453,11 +645,12 @@
* for all upper level blocks that directly/indirectly reference the
* block are also cached.
*/
-static struct backref_node *build_backref_tree(struct reloc_control *rc,
- struct backref_cache *cache,
- struct btrfs_key *node_key,
- int level, u64 bytenr)
+static noinline_for_stack
+struct backref_node *build_backref_tree(struct reloc_control *rc,
+ struct btrfs_key *node_key,
+ int level, u64 bytenr)
{
+ struct backref_cache *cache = &rc->backref_cache;
struct btrfs_path *path1;
struct btrfs_path *path2;
struct extent_buffer *eb;
@@ -473,6 +666,8 @@
unsigned long end;
unsigned long ptr;
LIST_HEAD(list);
+ LIST_HEAD(useless);
+ int cowonly;
int ret;
int err = 0;
@@ -483,15 +678,13 @@
goto out;
}
- node = kmalloc(sizeof(*node), GFP_NOFS);
+ node = alloc_backref_node(cache);
if (!node) {
err = -ENOMEM;
goto out;
}
- backref_node_init(node);
node->bytenr = bytenr;
- node->owner = 0;
node->level = level;
node->lowest = 1;
cur = node;
@@ -587,17 +780,21 @@
#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
if (key.type == BTRFS_SHARED_BLOCK_REF_KEY ||
key.type == BTRFS_EXTENT_REF_V0_KEY) {
- if (key.objectid == key.offset &&
- key.type == BTRFS_EXTENT_REF_V0_KEY) {
+ if (key.type == BTRFS_EXTENT_REF_V0_KEY) {
struct btrfs_extent_ref_v0 *ref0;
ref0 = btrfs_item_ptr(eb, path1->slots[0],
struct btrfs_extent_ref_v0);
- root = find_tree_root(rc, eb, ref0);
- if (root)
- cur->root = root;
- else
- cur->old_root = 1;
- break;
+ if (key.objectid == key.offset) {
+ root = find_tree_root(rc, eb, ref0);
+ if (root && !should_ignore_root(root))
+ cur->root = root;
+ else
+ list_add(&cur->list, &useless);
+ break;
+ }
+ if (is_cowonly_root(btrfs_ref_root_v0(eb,
+ ref0)))
+ cur->cowonly = 1;
}
#else
BUG_ON(key.type == BTRFS_EXTENT_REF_V0_KEY);
@@ -614,22 +811,20 @@
break;
}
- edge = kzalloc(sizeof(*edge), GFP_NOFS);
+ edge = alloc_backref_edge(cache);
if (!edge) {
err = -ENOMEM;
goto out;
}
rb_node = tree_search(&cache->rb_root, key.offset);
if (!rb_node) {
- upper = kmalloc(sizeof(*upper), GFP_NOFS);
+ upper = alloc_backref_node(cache);
if (!upper) {
- kfree(edge);
+ free_backref_edge(cache, edge);
err = -ENOMEM;
goto out;
}
- backref_node_init(upper);
upper->bytenr = key.offset;
- upper->owner = 0;
upper->level = cur->level + 1;
/*
* backrefs for the upper level block isn't
@@ -639,11 +834,12 @@
} else {
upper = rb_entry(rb_node, struct backref_node,
rb_node);
+ BUG_ON(!upper->checked);
INIT_LIST_HEAD(&edge->list[UPPER]);
}
- list_add(&edge->list[LOWER], &cur->upper);
- edge->node[UPPER] = upper;
+ list_add_tail(&edge->list[LOWER], &cur->upper);
edge->node[LOWER] = cur;
+ edge->node[UPPER] = upper;
goto next;
} else if (key.type != BTRFS_TREE_BLOCK_REF_KEY) {
@@ -657,11 +853,17 @@
goto out;
}
+ if (!root->ref_cows)
+ cur->cowonly = 1;
+
if (btrfs_root_level(&root->root_item) == cur->level) {
/* tree root */
BUG_ON(btrfs_root_bytenr(&root->root_item) !=
cur->bytenr);
- cur->root = root;
+ if (should_ignore_root(root))
+ list_add(&cur->list, &useless);
+ else
+ cur->root = root;
break;
}
@@ -692,11 +894,14 @@
if (!path2->nodes[level]) {
BUG_ON(btrfs_root_bytenr(&root->root_item) !=
lower->bytenr);
- lower->root = root;
+ if (should_ignore_root(root))
+ list_add(&lower->list, &useless);
+ else
+ lower->root = root;
break;
}
- edge = kzalloc(sizeof(*edge), GFP_NOFS);
+ edge = alloc_backref_edge(cache);
if (!edge) {
err = -ENOMEM;
goto out;
@@ -705,16 +910,17 @@
eb = path2->nodes[level];
rb_node = tree_search(&cache->rb_root, eb->start);
if (!rb_node) {
- upper = kmalloc(sizeof(*upper), GFP_NOFS);
+ upper = alloc_backref_node(cache);
if (!upper) {
- kfree(edge);
+ free_backref_edge(cache, edge);
err = -ENOMEM;
goto out;
}
- backref_node_init(upper);
upper->bytenr = eb->start;
upper->owner = btrfs_header_owner(eb);
upper->level = lower->level + 1;
+ if (!root->ref_cows)
+ upper->cowonly = 1;
/*
* if we know the block isn't shared
@@ -744,10 +950,12 @@
rb_node);
BUG_ON(!upper->checked);
INIT_LIST_HEAD(&edge->list[UPPER]);
+ if (!upper->owner)
+ upper->owner = btrfs_header_owner(eb);
}
list_add_tail(&edge->list[LOWER], &lower->upper);
- edge->node[UPPER] = upper;
edge->node[LOWER] = lower;
+ edge->node[UPPER] = upper;
if (rb_node)
break;
@@ -785,8 +993,13 @@
* into the cache.
*/
BUG_ON(!node->checked);
- rb_node = tree_insert(&cache->rb_root, node->bytenr, &node->rb_node);
- BUG_ON(rb_node);
+ cowonly = node->cowonly;
+ if (!cowonly) {
+ rb_node = tree_insert(&cache->rb_root, node->bytenr,
+ &node->rb_node);
+ BUG_ON(rb_node);
+ list_add_tail(&node->lower, &cache->leaves);
+ }
list_for_each_entry(edge, &node->upper, list[LOWER])
list_add_tail(&edge->list[UPPER], &list);
@@ -795,6 +1008,14 @@
edge = list_entry(list.next, struct backref_edge, list[UPPER]);
list_del_init(&edge->list[UPPER]);
upper = edge->node[UPPER];
+ if (upper->detached) {
+ list_del(&edge->list[LOWER]);
+ lower = edge->node[LOWER];
+ free_backref_edge(cache, edge);
+ if (list_empty(&lower->upper))
+ list_add(&lower->list, &useless);
+ continue;
+ }
if (!RB_EMPTY_NODE(&upper->rb_node)) {
if (upper->lowest) {
@@ -807,25 +1028,69 @@
}
BUG_ON(!upper->checked);
- rb_node = tree_insert(&cache->rb_root, upper->bytenr,
- &upper->rb_node);
- BUG_ON(rb_node);
+ BUG_ON(cowonly != upper->cowonly);
+ if (!cowonly) {
+ rb_node = tree_insert(&cache->rb_root, upper->bytenr,
+ &upper->rb_node);
+ BUG_ON(rb_node);
+ }
list_add_tail(&edge->list[UPPER], &upper->lower);
list_for_each_entry(edge, &upper->upper, list[LOWER])
list_add_tail(&edge->list[UPPER], &list);
}
+ /*
+ * process useless backref nodes. backref nodes for tree leaves
+ * are deleted from the cache. backref nodes for upper level
+ * tree blocks are left in the cache to avoid unnecessary backref
+ * lookup.
+ */
+ while (!list_empty(&useless)) {
+ upper = list_entry(useless.next, struct backref_node, list);
+ list_del_init(&upper->list);
+ BUG_ON(!list_empty(&upper->upper));
+ if (upper == node)
+ node = NULL;
+ if (upper->lowest) {
+ list_del_init(&upper->lower);
+ upper->lowest = 0;
+ }
+ while (!list_empty(&upper->lower)) {
+ edge = list_entry(upper->lower.next,
+ struct backref_edge, list[UPPER]);
+ list_del(&edge->list[UPPER]);
+ list_del(&edge->list[LOWER]);
+ lower = edge->node[LOWER];
+ free_backref_edge(cache, edge);
+
+ if (list_empty(&lower->upper))
+ list_add(&lower->list, &useless);
+ }
+ __mark_block_processed(rc, upper);
+ if (upper->level > 0) {
+ list_add(&upper->list, &cache->detached);
+ upper->detached = 1;
+ } else {
+ rb_erase(&upper->rb_node, &cache->rb_root);
+ free_backref_node(cache, upper);
+ }
+ }
out:
btrfs_free_path(path1);
btrfs_free_path(path2);
if (err) {
- INIT_LIST_HEAD(&list);
+ while (!list_empty(&useless)) {
+ lower = list_entry(useless.next,
+ struct backref_node, upper);
+ list_del_init(&lower->upper);
+ }
upper = node;
+ INIT_LIST_HEAD(&list);
while (upper) {
if (RB_EMPTY_NODE(&upper->rb_node)) {
list_splice_tail(&upper->upper, &list);
- kfree(upper);
+ free_backref_node(cache, upper);
}
if (list_empty(&list))
@@ -833,15 +1098,104 @@
edge = list_entry(list.next, struct backref_edge,
list[LOWER]);
+ list_del(&edge->list[LOWER]);
upper = edge->node[UPPER];
- kfree(edge);
+ free_backref_edge(cache, edge);
}
return ERR_PTR(err);
}
+ BUG_ON(node && node->detached);
return node;
}
/*
+ * helper to add backref node for the newly created snapshot.
+ * the backref node is created by cloning backref node that
+ * corresponds to root of source tree
+ */
+static int clone_backref_node(struct btrfs_trans_handle *trans,
+ struct reloc_control *rc,
+ struct btrfs_root *src,
+ struct btrfs_root *dest)
+{
+ struct btrfs_root *reloc_root = src->reloc_root;
+ struct backref_cache *cache = &rc->backref_cache;
+ struct backref_node *node = NULL;
+ struct backref_node *new_node;
+ struct backref_edge *edge;
+ struct backref_edge *new_edge;
+ struct rb_node *rb_node;
+
+ if (cache->last_trans > 0)
+ update_backref_cache(trans, cache);
+
+ rb_node = tree_search(&cache->rb_root, src->commit_root->start);
+ if (rb_node) {
+ node = rb_entry(rb_node, struct backref_node, rb_node);
+ if (node->detached)
+ node = NULL;
+ else
+ BUG_ON(node->new_bytenr != reloc_root->node->start);
+ }
+
+ if (!node) {
+ rb_node = tree_search(&cache->rb_root,
+ reloc_root->commit_root->start);
+ if (rb_node) {
+ node = rb_entry(rb_node, struct backref_node,
+ rb_node);
+ BUG_ON(node->detached);
+ }
+ }
+
+ if (!node)
+ return 0;
+
+ new_node = alloc_backref_node(cache);
+ if (!new_node)
+ return -ENOMEM;
+
+ new_node->bytenr = dest->node->start;
+ new_node->level = node->level;
+ new_node->lowest = node->lowest;
+ new_node->root = dest;
+
+ if (!node->lowest) {
+ list_for_each_entry(edge, &node->lower, list[UPPER]) {
+ new_edge = alloc_backref_edge(cache);
+ if (!new_edge)
+ goto fail;
+
+ new_edge->node[UPPER] = new_node;
+ new_edge->node[LOWER] = edge->node[LOWER];
+ list_add_tail(&new_edge->list[UPPER],
+ &new_node->lower);
+ }
+ }
+
+ rb_node = tree_insert(&cache->rb_root, new_node->bytenr,
+ &new_node->rb_node);
+ BUG_ON(rb_node);
+
+ if (!new_node->lowest) {
+ list_for_each_entry(new_edge, &new_node->lower, list[UPPER]) {
+ list_add_tail(&new_edge->list[LOWER],
+ &new_edge->node[LOWER]->upper);
+ }
+ }
+ return 0;
+fail:
+ while (!list_empty(&new_node->lower)) {
+ new_edge = list_entry(new_node->lower.next,
+ struct backref_edge, list[UPPER]);
+ list_del(&new_edge->list[UPPER]);
+ free_backref_edge(cache, new_edge);
+ }
+ free_backref_node(cache, new_node);
+ return -ENOMEM;
+}
+
+/*
* helper to add 'address of tree root -> reloc tree' mapping
*/
static int __add_reloc_root(struct btrfs_root *root)
@@ -901,12 +1255,8 @@
return 0;
}
-/*
- * create reloc tree for a given fs tree. reloc tree is just a
- * snapshot of the fs tree with special root objectid.
- */
-int btrfs_init_reloc_root(struct btrfs_trans_handle *trans,
- struct btrfs_root *root)
+static struct btrfs_root *create_reloc_root(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root, u64 objectid)
{
struct btrfs_root *reloc_root;
struct extent_buffer *eb;
@@ -914,36 +1264,45 @@
struct btrfs_key root_key;
int ret;
- if (root->reloc_root) {
- reloc_root = root->reloc_root;
- reloc_root->last_trans = trans->transid;
- return 0;
- }
-
- if (!root->fs_info->reloc_ctl ||
- !root->fs_info->reloc_ctl->create_reloc_root ||
- root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID)
- return 0;
-
root_item = kmalloc(sizeof(*root_item), GFP_NOFS);
BUG_ON(!root_item);
root_key.objectid = BTRFS_TREE_RELOC_OBJECTID;
root_key.type = BTRFS_ROOT_ITEM_KEY;
- root_key.offset = root->root_key.objectid;
+ root_key.offset = objectid;
- ret = btrfs_copy_root(trans, root, root->commit_root, &eb,
- BTRFS_TREE_RELOC_OBJECTID);
- BUG_ON(ret);
+ if (root->root_key.objectid == objectid) {
+ /* called by btrfs_init_reloc_root */
+ ret = btrfs_copy_root(trans, root, root->commit_root, &eb,
+ BTRFS_TREE_RELOC_OBJECTID);
+ BUG_ON(ret);
- btrfs_set_root_last_snapshot(&root->root_item, trans->transid - 1);
+ btrfs_set_root_last_snapshot(&root->root_item,
+ trans->transid - 1);
+ } else {
+ /*
+ * called by btrfs_reloc_post_snapshot_hook.
+ * the source tree is a reloc tree, all tree blocks
+ * modified after it was created have RELOC flag
+ * set in their headers. so it's OK to not update
+ * the 'last_snapshot'.
+ */
+ ret = btrfs_copy_root(trans, root, root->node, &eb,
+ BTRFS_TREE_RELOC_OBJECTID);
+ BUG_ON(ret);
+ }
+
memcpy(root_item, &root->root_item, sizeof(*root_item));
- btrfs_set_root_refs(root_item, 1);
btrfs_set_root_bytenr(root_item, eb->start);
btrfs_set_root_level(root_item, btrfs_header_level(eb));
btrfs_set_root_generation(root_item, trans->transid);
- memset(&root_item->drop_progress, 0, sizeof(struct btrfs_disk_key));
- root_item->drop_level = 0;
+
+ if (root->root_key.objectid == objectid) {
+ btrfs_set_root_refs(root_item, 0);
+ memset(&root_item->drop_progress, 0,
+ sizeof(struct btrfs_disk_key));
+ root_item->drop_level = 0;
+ }
btrfs_tree_unlock(eb);
free_extent_buffer(eb);
@@ -957,6 +1316,37 @@
&root_key);
BUG_ON(IS_ERR(reloc_root));
reloc_root->last_trans = trans->transid;
+ return reloc_root;
+}
+
+/*
+ * create reloc tree for a given fs tree. reloc tree is just a
+ * snapshot of the fs tree with special root objectid.
+ */
+int btrfs_init_reloc_root(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root)
+{
+ struct btrfs_root *reloc_root;
+ struct reloc_control *rc = root->fs_info->reloc_ctl;
+ int clear_rsv = 0;
+
+ if (root->reloc_root) {
+ reloc_root = root->reloc_root;
+ reloc_root->last_trans = trans->transid;
+ return 0;
+ }
+
+ if (!rc || !rc->create_reloc_tree ||
+ root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID)
+ return 0;
+
+ if (!trans->block_rsv) {
+ trans->block_rsv = rc->block_rsv;
+ clear_rsv = 1;
+ }
+ reloc_root = create_reloc_root(trans, root, root->root_key.objectid);
+ if (clear_rsv)
+ trans->block_rsv = NULL;
__add_reloc_root(reloc_root);
root->reloc_root = reloc_root;
@@ -980,7 +1370,8 @@
reloc_root = root->reloc_root;
root_item = &reloc_root->root_item;
- if (btrfs_root_refs(root_item) == 0) {
+ if (root->fs_info->reloc_ctl->merge_reloc_tree &&
+ btrfs_root_refs(root_item) == 0) {
root->reloc_root = NULL;
del = 1;
}
@@ -1102,8 +1493,7 @@
goto out;
}
- if (new_bytenr)
- *new_bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
+ *new_bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
ret = 0;
out:
btrfs_free_path(path);
@@ -1114,19 +1504,18 @@
* update file extent items in the tree leaf to point to
* the new locations.
*/
-static int replace_file_extents(struct btrfs_trans_handle *trans,
- struct reloc_control *rc,
- struct btrfs_root *root,
- struct extent_buffer *leaf,
- struct list_head *inode_list)
+static noinline_for_stack
+int replace_file_extents(struct btrfs_trans_handle *trans,
+ struct reloc_control *rc,
+ struct btrfs_root *root,
+ struct extent_buffer *leaf)
{
struct btrfs_key key;
struct btrfs_file_extent_item *fi;
struct inode *inode = NULL;
- struct inodevec *ivec = NULL;
u64 parent;
u64 bytenr;
- u64 new_bytenr;
+ u64 new_bytenr = 0;
u64 num_bytes;
u64 end;
u32 nritems;
@@ -1166,21 +1555,12 @@
* to complete and drop the extent cache
*/
if (root->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID) {
- if (!ivec || ivec->nr == INODEVEC_SIZE) {
- ivec = kmalloc(sizeof(*ivec), GFP_NOFS);
- BUG_ON(!ivec);
- ivec->nr = 0;
- list_add_tail(&ivec->list, inode_list);
- }
if (first) {
inode = find_next_inode(root, key.objectid);
- if (inode)
- ivec->inode[ivec->nr++] = inode;
first = 0;
} else if (inode && inode->i_ino < key.objectid) {
+ btrfs_add_delayed_iput(inode);
inode = find_next_inode(root, key.objectid);
- if (inode)
- ivec->inode[ivec->nr++] = inode;
}
if (inode && inode->i_ino == key.objectid) {
end = key.offset +
@@ -1204,8 +1584,10 @@
ret = get_new_location(rc->data_inode, &new_bytenr,
bytenr, num_bytes);
- if (ret > 0)
+ if (ret > 0) {
+ WARN_ON(1);
continue;
+ }
BUG_ON(ret < 0);
btrfs_set_file_extent_disk_bytenr(leaf, fi, new_bytenr);
@@ -1225,6 +1607,8 @@
}
if (dirty)
btrfs_mark_buffer_dirty(leaf);
+ if (inode)
+ btrfs_add_delayed_iput(inode);
return 0;
}
@@ -1248,11 +1632,11 @@
* if no block got replaced, 0 is returned. if there are other
* errors, a negative error number is returned.
*/
-static int replace_path(struct btrfs_trans_handle *trans,
- struct btrfs_root *dest, struct btrfs_root *src,
- struct btrfs_path *path, struct btrfs_key *next_key,
- struct extent_buffer **leaf,
- int lowest_level, int max_level)
+static noinline_for_stack
+int replace_path(struct btrfs_trans_handle *trans,
+ struct btrfs_root *dest, struct btrfs_root *src,
+ struct btrfs_path *path, struct btrfs_key *next_key,
+ int lowest_level, int max_level)
{
struct extent_buffer *eb;
struct extent_buffer *parent;
@@ -1263,16 +1647,16 @@
u64 new_ptr_gen;
u64 last_snapshot;
u32 blocksize;
+ int cow = 0;
int level;
int ret;
int slot;
BUG_ON(src->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID);
BUG_ON(dest->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID);
- BUG_ON(lowest_level > 1 && leaf);
last_snapshot = btrfs_root_last_snapshot(&src->root_item);
-
+again:
slot = path->slots[lowest_level];
btrfs_node_key_to_cpu(path->nodes[lowest_level], &key, slot);
@@ -1286,8 +1670,10 @@
return 0;
}
- ret = btrfs_cow_block(trans, dest, eb, NULL, 0, &eb);
- BUG_ON(ret);
+ if (cow) {
+ ret = btrfs_cow_block(trans, dest, eb, NULL, 0, &eb);
+ BUG_ON(ret);
+ }
btrfs_set_lock_blocking(eb);
if (next_key) {
@@ -1331,7 +1717,7 @@
if (new_bytenr == 0 || old_ptr_gen > last_snapshot ||
memcmp_node_keys(parent, slot, path, level)) {
- if (level <= lowest_level && !leaf) {
+ if (level <= lowest_level) {
ret = 0;
break;
}
@@ -1339,16 +1725,12 @@
eb = read_tree_block(dest, old_bytenr, blocksize,
old_ptr_gen);
btrfs_tree_lock(eb);
- ret = btrfs_cow_block(trans, dest, eb, parent,
- slot, &eb);
- BUG_ON(ret);
- btrfs_set_lock_blocking(eb);
-
- if (level <= lowest_level) {
- *leaf = eb;
- ret = 0;
- break;
+ if (cow) {
+ ret = btrfs_cow_block(trans, dest, eb, parent,
+ slot, &eb);
+ BUG_ON(ret);
}
+ btrfs_set_lock_blocking(eb);
btrfs_tree_unlock(parent);
free_extent_buffer(parent);
@@ -1357,6 +1739,13 @@
continue;
}
+ if (!cow) {
+ btrfs_tree_unlock(parent);
+ free_extent_buffer(parent);
+ cow = 1;
+ goto again;
+ }
+
btrfs_node_key_to_cpu(path->nodes[level], &key,
path->slots[level]);
btrfs_release_path(src, path);
@@ -1562,20 +1951,6 @@
return 0;
}
-static void put_inodes(struct list_head *list)
-{
- struct inodevec *ivec;
- while (!list_empty(list)) {
- ivec = list_entry(list->next, struct inodevec, list);
- list_del(&ivec->list);
- while (ivec->nr > 0) {
- ivec->nr--;
- iput(ivec->inode[ivec->nr]);
- }
- kfree(ivec);
- }
-}
-
static int find_next_key(struct btrfs_path *path, int level,
struct btrfs_key *key)
@@ -1608,13 +1983,14 @@
struct btrfs_root *reloc_root;
struct btrfs_root_item *root_item;
struct btrfs_path *path;
- struct extent_buffer *leaf = NULL;
+ struct extent_buffer *leaf;
unsigned long nr;
int level;
int max_level;
int replaced = 0;
int ret;
int err = 0;
+ u32 min_reserved;
path = btrfs_alloc_path();
if (!path)
@@ -1648,34 +2024,23 @@
btrfs_unlock_up_safe(path, 0);
}
- if (level == 0 && rc->stage == UPDATE_DATA_PTRS) {
- trans = btrfs_start_transaction(root, 1);
-
- leaf = path->nodes[0];
- btrfs_item_key_to_cpu(leaf, &key, 0);
- btrfs_release_path(reloc_root, path);
-
- ret = btrfs_search_slot(trans, root, &key, path, 0, 1);
- if (ret < 0) {
- err = ret;
- goto out;
- }
-
- leaf = path->nodes[0];
- btrfs_unlock_up_safe(path, 1);
- ret = replace_file_extents(trans, rc, root, leaf,
- &inode_list);
- if (ret < 0)
- err = ret;
- goto out;
- }
-
+ min_reserved = root->nodesize * (BTRFS_MAX_LEVEL - 1) * 2;
memset(&next_key, 0, sizeof(next_key));
while (1) {
- leaf = NULL;
+ trans = btrfs_start_transaction(root, 0);
+ trans->block_rsv = rc->block_rsv;
+
+ ret = btrfs_block_rsv_check(trans, root, rc->block_rsv,
+ min_reserved, 0);
+ if (ret) {
+ BUG_ON(ret != -EAGAIN);
+ ret = btrfs_commit_transaction(trans, root);
+ BUG_ON(ret);
+ continue;
+ }
+
replaced = 0;
- trans = btrfs_start_transaction(root, 1);
max_level = level;
ret = walk_down_reloc_tree(reloc_root, path, &level);
@@ -1689,14 +2054,9 @@
if (!find_next_key(path, level, &key) &&
btrfs_comp_cpu_keys(&next_key, &key) >= 0) {
ret = 0;
- } else if (level == 1 && rc->stage == UPDATE_DATA_PTRS) {
- ret = replace_path(trans, root, reloc_root,
- path, &next_key, &leaf,
- level, max_level);
} else {
- ret = replace_path(trans, root, reloc_root,
- path, &next_key, NULL,
- level, max_level);
+ ret = replace_path(trans, root, reloc_root, path,
+ &next_key, level, max_level);
}
if (ret < 0) {
err = ret;
@@ -1708,16 +2068,6 @@
btrfs_node_key_to_cpu(path->nodes[level], &key,
path->slots[level]);
replaced = 1;
- } else if (leaf) {
- /*
- * no block got replaced, try replacing file extents
- */
- btrfs_item_key_to_cpu(leaf, &key, 0);
- ret = replace_file_extents(trans, rc, root, leaf,
- &inode_list);
- btrfs_tree_unlock(leaf);
- free_extent_buffer(leaf);
- BUG_ON(ret < 0);
}
ret = walk_up_reloc_tree(reloc_root, path, &level);
@@ -1734,15 +2084,10 @@
root_item->drop_level = level;
nr = trans->blocks_used;
- btrfs_end_transaction(trans, root);
+ btrfs_end_transaction_throttle(trans, root);
btrfs_btree_balance_dirty(root, nr);
- /*
- * put inodes outside transaction, otherwise we may deadlock.
- */
- put_inodes(&inode_list);
-
if (replaced && rc->stage == UPDATE_DATA_PTRS)
invalidate_extent_cache(root, &key, &next_key);
}
@@ -1765,87 +2110,125 @@
sizeof(root_item->drop_progress));
root_item->drop_level = 0;
btrfs_set_root_refs(root_item, 0);
+ btrfs_update_reloc_root(trans, root);
}
nr = trans->blocks_used;
- btrfs_end_transaction(trans, root);
+ btrfs_end_transaction_throttle(trans, root);
btrfs_btree_balance_dirty(root, nr);
- put_inodes(&inode_list);
-
if (replaced && rc->stage == UPDATE_DATA_PTRS)
invalidate_extent_cache(root, &key, &next_key);
return err;
}
-/*
- * callback for the work threads.
- * this function merges reloc tree with corresponding fs tree,
- * and then drops the reloc tree.
- */
-static void merge_func(struct btrfs_work *work)
+static noinline_for_stack
+int prepare_to_merge(struct reloc_control *rc, int err)
{
- struct btrfs_trans_handle *trans;
- struct btrfs_root *root;
+ struct btrfs_root *root = rc->extent_root;
struct btrfs_root *reloc_root;
- struct async_merge *async;
+ struct btrfs_trans_handle *trans;
+ LIST_HEAD(reloc_roots);
+ u64 num_bytes = 0;
+ int ret;
+ int retries = 0;
- async = container_of(work, struct async_merge, work);
- reloc_root = async->root;
+ mutex_lock(&root->fs_info->trans_mutex);
+ rc->merging_rsv_size += root->nodesize * (BTRFS_MAX_LEVEL - 1) * 2;
+ rc->merging_rsv_size += rc->nodes_relocated * 2;
+ mutex_unlock(&root->fs_info->trans_mutex);
+again:
+ if (!err) {
+ num_bytes = rc->merging_rsv_size;
+ ret = btrfs_block_rsv_add(NULL, root, rc->block_rsv,
+ num_bytes, &retries);
+ if (ret)
+ err = ret;
+ }
- if (btrfs_root_refs(&reloc_root->root_item) > 0) {
+ trans = btrfs_join_transaction(rc->extent_root, 1);
+
+ if (!err) {
+ if (num_bytes != rc->merging_rsv_size) {
+ btrfs_end_transaction(trans, rc->extent_root);
+ btrfs_block_rsv_release(rc->extent_root,
+ rc->block_rsv, num_bytes);
+ retries = 0;
+ goto again;
+ }
+ }
+
+ rc->merge_reloc_tree = 1;
+
+ while (!list_empty(&rc->reloc_roots)) {
+ reloc_root = list_entry(rc->reloc_roots.next,
+ struct btrfs_root, root_list);
+ list_del_init(&reloc_root->root_list);
+
root = read_fs_root(reloc_root->fs_info,
reloc_root->root_key.offset);
BUG_ON(IS_ERR(root));
BUG_ON(root->reloc_root != reloc_root);
- merge_reloc_root(async->rc, root);
-
- trans = btrfs_start_transaction(root, 1);
+ /*
+ * set reference count to 1, so btrfs_recover_relocation
+ * knows it should resumes merging
+ */
+ if (!err)
+ btrfs_set_root_refs(&reloc_root->root_item, 1);
btrfs_update_reloc_root(trans, root);
- btrfs_end_transaction(trans, root);
+
+ list_add(&reloc_root->root_list, &reloc_roots);
}
- btrfs_drop_snapshot(reloc_root, 0);
+ list_splice(&reloc_roots, &rc->reloc_roots);
- if (atomic_dec_and_test(async->num_pending))
- complete(async->done);
-
- kfree(async);
+ if (!err)
+ btrfs_commit_transaction(trans, rc->extent_root);
+ else
+ btrfs_end_transaction(trans, rc->extent_root);
+ return err;
}
-static int merge_reloc_roots(struct reloc_control *rc)
+static noinline_for_stack
+int merge_reloc_roots(struct reloc_control *rc)
{
- struct async_merge *async;
struct btrfs_root *root;
- struct completion done;
- atomic_t num_pending;
+ struct btrfs_root *reloc_root;
+ LIST_HEAD(reloc_roots);
+ int found = 0;
+ int ret;
+again:
+ root = rc->extent_root;
+ mutex_lock(&root->fs_info->trans_mutex);
+ list_splice_init(&rc->reloc_roots, &reloc_roots);
+ mutex_unlock(&root->fs_info->trans_mutex);
- init_completion(&done);
- atomic_set(&num_pending, 1);
+ while (!list_empty(&reloc_roots)) {
+ found = 1;
+ reloc_root = list_entry(reloc_roots.next,
+ struct btrfs_root, root_list);
- while (!list_empty(&rc->reloc_roots)) {
- root = list_entry(rc->reloc_roots.next,
- struct btrfs_root, root_list);
- list_del_init(&root->root_list);
+ if (btrfs_root_refs(&reloc_root->root_item) > 0) {
+ root = read_fs_root(reloc_root->fs_info,
+ reloc_root->root_key.offset);
+ BUG_ON(IS_ERR(root));
+ BUG_ON(root->reloc_root != reloc_root);
- async = kmalloc(sizeof(*async), GFP_NOFS);
- BUG_ON(!async);
- async->work.func = merge_func;
- async->work.flags = 0;
- async->rc = rc;
- async->root = root;
- async->done = &done;
- async->num_pending = &num_pending;
- atomic_inc(&num_pending);
- btrfs_queue_worker(&rc->workers, &async->work);
+ ret = merge_reloc_root(rc, root);
+ BUG_ON(ret);
+ } else {
+ list_del_init(&reloc_root->root_list);
+ }
+ btrfs_drop_snapshot(reloc_root, rc->block_rsv, 0);
}
- if (!atomic_dec_and_test(&num_pending))
- wait_for_completion(&done);
-
+ if (found) {
+ found = 0;
+ goto again;
+ }
BUG_ON(!RB_EMPTY_ROOT(&rc->reloc_root_tree.rb_root));
return 0;
}
@@ -1876,119 +2259,169 @@
return btrfs_record_root_in_trans(trans, root);
}
-/*
- * select one tree from trees that references the block.
- * for blocks in refernce counted trees, we preper reloc tree.
- * if no reloc tree found and reloc_only is true, NULL is returned.
- */
-static struct btrfs_root *__select_one_root(struct btrfs_trans_handle *trans,
- struct backref_node *node,
- struct backref_edge *edges[],
- int *nr, int reloc_only)
+static noinline_for_stack
+struct btrfs_root *select_reloc_root(struct btrfs_trans_handle *trans,
+ struct reloc_control *rc,
+ struct backref_node *node,
+ struct backref_edge *edges[], int *nr)
{
struct backref_node *next;
struct btrfs_root *root;
- int index;
- int loop = 0;
-again:
- index = 0;
+ int index = 0;
+
next = node;
while (1) {
cond_resched();
next = walk_up_backref(next, edges, &index);
root = next->root;
- if (!root) {
- BUG_ON(!node->old_root);
- goto skip;
- }
-
- /* no other choice for non-refernce counted tree */
- if (!root->ref_cows) {
- BUG_ON(reloc_only);
- break;
- }
+ BUG_ON(!root);
+ BUG_ON(!root->ref_cows);
if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID) {
record_reloc_root_in_trans(trans, root);
break;
}
- if (loop) {
- btrfs_record_root_in_trans(trans, root);
+ btrfs_record_root_in_trans(trans, root);
+ root = root->reloc_root;
+
+ if (next->new_bytenr != root->node->start) {
+ BUG_ON(next->new_bytenr);
+ BUG_ON(!list_empty(&next->list));
+ next->new_bytenr = root->node->start;
+ next->root = root;
+ list_add_tail(&next->list,
+ &rc->backref_cache.changed);
+ __mark_block_processed(rc, next);
break;
}
- if (reloc_only || next != node) {
- if (!root->reloc_root)
- btrfs_record_root_in_trans(trans, root);
- root = root->reloc_root;
- /*
- * if the reloc tree was created in current
- * transation, there is no node in backref tree
- * corresponds to the root of the reloc tree.
- */
- if (btrfs_root_last_snapshot(&root->root_item) ==
- trans->transid - 1)
- break;
- }
-skip:
+ WARN_ON(1);
root = NULL;
next = walk_down_backref(edges, &index);
if (!next || next->level <= node->level)
break;
}
+ if (!root)
+ return NULL;
- if (!root && !loop && !reloc_only) {
- loop = 1;
- goto again;
+ *nr = index;
+ next = node;
+ /* setup backref node path for btrfs_reloc_cow_block */
+ while (1) {
+ rc->backref_cache.path[next->level] = next;
+ if (--index < 0)
+ break;
+ next = edges[index]->node[UPPER];
}
-
- if (root)
- *nr = index;
- else
- *nr = 0;
-
return root;
}
+/*
+ * select a tree root for relocation. return NULL if the block
+ * is reference counted. we should use do_relocation() in this
+ * case. return a tree root pointer if the block isn't reference
+ * counted. return -ENOENT if the block is root of reloc tree.
+ */
static noinline_for_stack
struct btrfs_root *select_one_root(struct btrfs_trans_handle *trans,
struct backref_node *node)
{
+ struct backref_node *next;
+ struct btrfs_root *root;
+ struct btrfs_root *fs_root = NULL;
struct backref_edge *edges[BTRFS_MAX_LEVEL - 1];
- int nr;
- return __select_one_root(trans, node, edges, &nr, 0);
+ int index = 0;
+
+ next = node;
+ while (1) {
+ cond_resched();
+ next = walk_up_backref(next, edges, &index);
+ root = next->root;
+ BUG_ON(!root);
+
+ /* no other choice for non-refernce counted tree */
+ if (!root->ref_cows)
+ return root;
+
+ if (root->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID)
+ fs_root = root;
+
+ if (next != node)
+ return NULL;
+
+ next = walk_down_backref(edges, &index);
+ if (!next || next->level <= node->level)
+ break;
+ }
+
+ if (!fs_root)
+ return ERR_PTR(-ENOENT);
+ return fs_root;
}
static noinline_for_stack
-struct btrfs_root *select_reloc_root(struct btrfs_trans_handle *trans,
- struct backref_node *node,
- struct backref_edge *edges[], int *nr)
+u64 calcu_metadata_size(struct reloc_control *rc,
+ struct backref_node *node, int reserve)
{
- return __select_one_root(trans, node, edges, nr, 1);
+ struct backref_node *next = node;
+ struct backref_edge *edge;
+ struct backref_edge *edges[BTRFS_MAX_LEVEL - 1];
+ u64 num_bytes = 0;
+ int index = 0;
+
+ BUG_ON(reserve && node->processed);
+
+ while (next) {
+ cond_resched();
+ while (1) {
+ if (next->processed && (reserve || next != node))
+ break;
+
+ num_bytes += btrfs_level_size(rc->extent_root,
+ next->level);
+
+ if (list_empty(&next->upper))
+ break;
+
+ edge = list_entry(next->upper.next,
+ struct backref_edge, list[LOWER]);
+ edges[index++] = edge;
+ next = edge->node[UPPER];
+ }
+ next = walk_down_backref(edges, &index);
+ }
+ return num_bytes;
}
-static void grab_path_buffers(struct btrfs_path *path,
- struct backref_node *node,
- struct backref_edge *edges[], int nr)
+static int reserve_metadata_space(struct btrfs_trans_handle *trans,
+ struct reloc_control *rc,
+ struct backref_node *node)
{
- int i = 0;
- while (1) {
- drop_node_buffer(node);
- node->eb = path->nodes[node->level];
- BUG_ON(!node->eb);
- if (path->locks[node->level])
- node->locked = 1;
- path->nodes[node->level] = NULL;
- path->locks[node->level] = 0;
+ struct btrfs_root *root = rc->extent_root;
+ u64 num_bytes;
+ int ret;
- if (i >= nr)
- break;
+ num_bytes = calcu_metadata_size(rc, node, 1) * 2;
- edges[i]->blockptr = node->eb->start;
- node = edges[i]->node[UPPER];
- i++;
+ trans->block_rsv = rc->block_rsv;
+ ret = btrfs_block_rsv_add(trans, root, rc->block_rsv, num_bytes,
+ &rc->block_rsv_retries);
+ if (ret) {
+ if (ret == -EAGAIN)
+ rc->commit_transaction = 1;
+ return ret;
}
+
+ rc->block_rsv_retries = 0;
+ return 0;
+}
+
+static void release_metadata_space(struct reloc_control *rc,
+ struct backref_node *node)
+{
+ u64 num_bytes = calcu_metadata_size(rc, node, 0) * 2;
+ btrfs_block_rsv_release(rc->extent_root, rc->block_rsv, num_bytes);
}
/*
@@ -1999,6 +2432,7 @@
* in that case this function just updates pointers.
*/
static int do_relocation(struct btrfs_trans_handle *trans,
+ struct reloc_control *rc,
struct backref_node *node,
struct btrfs_key *key,
struct btrfs_path *path, int lowest)
@@ -2019,18 +2453,25 @@
BUG_ON(lowest && node->eb);
path->lowest_level = node->level + 1;
+ rc->backref_cache.path[node->level] = node;
list_for_each_entry(edge, &node->upper, list[LOWER]) {
cond_resched();
- if (node->eb && node->eb->start == edge->blockptr)
- continue;
upper = edge->node[UPPER];
- root = select_reloc_root(trans, upper, edges, &nr);
- if (!root)
- continue;
+ root = select_reloc_root(trans, rc, upper, edges, &nr);
+ BUG_ON(!root);
- if (upper->eb && !upper->locked)
+ if (upper->eb && !upper->locked) {
+ if (!lowest) {
+ ret = btrfs_bin_search(upper->eb, key,
+ upper->level, &slot);
+ BUG_ON(ret);
+ bytenr = btrfs_node_blockptr(upper->eb, slot);
+ if (node->eb->start == bytenr)
+ goto next;
+ }
drop_node_buffer(upper);
+ }
if (!upper->eb) {
ret = btrfs_search_slot(trans, root, key, path, 0, 1);
@@ -2040,11 +2481,17 @@
}
BUG_ON(ret > 0);
+ if (!upper->eb) {
+ upper->eb = path->nodes[upper->level];
+ path->nodes[upper->level] = NULL;
+ } else {
+ BUG_ON(upper->eb != path->nodes[upper->level]);
+ }
+
+ upper->locked = 1;
+ path->locks[upper->level] = 0;
+
slot = path->slots[upper->level];
-
- btrfs_unlock_up_safe(path, upper->level + 1);
- grab_path_buffers(path, upper, edges, nr);
-
btrfs_release_path(NULL, path);
} else {
ret = btrfs_bin_search(upper->eb, key, upper->level,
@@ -2053,14 +2500,11 @@
}
bytenr = btrfs_node_blockptr(upper->eb, slot);
- if (!lowest) {
- if (node->eb->start == bytenr) {
- btrfs_tree_unlock(upper->eb);
- upper->locked = 0;
- continue;
- }
+ if (lowest) {
+ BUG_ON(bytenr != node->bytenr);
} else {
- BUG_ON(node->bytenr != bytenr);
+ if (node->eb->start == bytenr)
+ goto next;
}
blocksize = btrfs_level_size(root, node->level);
@@ -2072,13 +2516,13 @@
if (!node->eb) {
ret = btrfs_cow_block(trans, root, eb, upper->eb,
slot, &eb);
+ btrfs_tree_unlock(eb);
+ free_extent_buffer(eb);
if (ret < 0) {
err = ret;
- break;
+ goto next;
}
- btrfs_set_lock_blocking(eb);
- node->eb = eb;
- node->locked = 1;
+ BUG_ON(node->eb != eb);
} else {
btrfs_set_node_blockptr(upper->eb, slot,
node->eb->start);
@@ -2096,67 +2540,80 @@
ret = btrfs_drop_subtree(trans, root, eb, upper->eb);
BUG_ON(ret);
}
- if (!lowest) {
- btrfs_tree_unlock(upper->eb);
- upper->locked = 0;
- }
+next:
+ if (!upper->pending)
+ drop_node_buffer(upper);
+ else
+ unlock_node_buffer(upper);
+ if (err)
+ break;
}
+
+ if (!err && node->pending) {
+ drop_node_buffer(node);
+ list_move_tail(&node->list, &rc->backref_cache.changed);
+ node->pending = 0;
+ }
+
path->lowest_level = 0;
+ BUG_ON(err == -ENOSPC);
return err;
}
static int link_to_upper(struct btrfs_trans_handle *trans,
+ struct reloc_control *rc,
struct backref_node *node,
struct btrfs_path *path)
{
struct btrfs_key key;
- if (!node->eb || list_empty(&node->upper))
- return 0;
btrfs_node_key_to_cpu(node->eb, &key, 0);
- return do_relocation(trans, node, &key, path, 0);
+ return do_relocation(trans, rc, node, &key, path, 0);
}
static int finish_pending_nodes(struct btrfs_trans_handle *trans,
- struct backref_cache *cache,
- struct btrfs_path *path)
+ struct reloc_control *rc,
+ struct btrfs_path *path, int err)
{
+ LIST_HEAD(list);
+ struct backref_cache *cache = &rc->backref_cache;
struct backref_node *node;
int level;
int ret;
- int err = 0;
for (level = 0; level < BTRFS_MAX_LEVEL; level++) {
while (!list_empty(&cache->pending[level])) {
node = list_entry(cache->pending[level].next,
- struct backref_node, lower);
- BUG_ON(node->level != level);
+ struct backref_node, list);
+ list_move_tail(&node->list, &list);
+ BUG_ON(!node->pending);
- ret = link_to_upper(trans, node, path);
- if (ret < 0)
- err = ret;
- /*
- * this remove the node from the pending list and
- * may add some other nodes to the level + 1
- * pending list
- */
- remove_backref_node(cache, node);
+ if (!err) {
+ ret = link_to_upper(trans, rc, node, path);
+ if (ret < 0)
+ err = ret;
+ }
}
+ list_splice_init(&list, &cache->pending[level]);
}
- BUG_ON(!RB_EMPTY_ROOT(&cache->rb_root));
return err;
}
static void mark_block_processed(struct reloc_control *rc,
- struct backref_node *node)
+ u64 bytenr, u32 blocksize)
+{
+ set_extent_bits(&rc->processed_blocks, bytenr, bytenr + blocksize - 1,
+ EXTENT_DIRTY, GFP_NOFS);
+}
+
+static void __mark_block_processed(struct reloc_control *rc,
+ struct backref_node *node)
{
u32 blocksize;
if (node->level == 0 ||
in_block_group(node->bytenr, rc->block_group)) {
blocksize = btrfs_level_size(rc->extent_root, node->level);
- set_extent_bits(&rc->processed_blocks, node->bytenr,
- node->bytenr + blocksize - 1, EXTENT_DIRTY,
- GFP_NOFS);
+ mark_block_processed(rc, node->bytenr, blocksize);
}
node->processed = 1;
}
@@ -2179,7 +2636,7 @@
if (next->processed)
break;
- mark_block_processed(rc, next);
+ __mark_block_processed(rc, next);
if (list_empty(&next->upper))
break;
@@ -2202,138 +2659,6 @@
return 0;
}
-/*
- * check if there are any file extent pointers in the leaf point to
- * data require processing
- */
-static int check_file_extents(struct reloc_control *rc,
- u64 bytenr, u32 blocksize, u64 ptr_gen)
-{
- struct btrfs_key found_key;
- struct btrfs_file_extent_item *fi;
- struct extent_buffer *leaf;
- u32 nritems;
- int i;
- int ret = 0;
-
- leaf = read_tree_block(rc->extent_root, bytenr, blocksize, ptr_gen);
-
- nritems = btrfs_header_nritems(leaf);
- for (i = 0; i < nritems; i++) {
- cond_resched();
- btrfs_item_key_to_cpu(leaf, &found_key, i);
- if (found_key.type != BTRFS_EXTENT_DATA_KEY)
- continue;
- fi = btrfs_item_ptr(leaf, i, struct btrfs_file_extent_item);
- if (btrfs_file_extent_type(leaf, fi) ==
- BTRFS_FILE_EXTENT_INLINE)
- continue;
- bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
- if (bytenr == 0)
- continue;
- if (in_block_group(bytenr, rc->block_group)) {
- ret = 1;
- break;
- }
- }
- free_extent_buffer(leaf);
- return ret;
-}
-
-/*
- * scan child blocks of a given block to find blocks require processing
- */
-static int add_child_blocks(struct btrfs_trans_handle *trans,
- struct reloc_control *rc,
- struct backref_node *node,
- struct rb_root *blocks)
-{
- struct tree_block *block;
- struct rb_node *rb_node;
- u64 bytenr;
- u64 ptr_gen;
- u32 blocksize;
- u32 nritems;
- int i;
- int err = 0;
-
- nritems = btrfs_header_nritems(node->eb);
- blocksize = btrfs_level_size(rc->extent_root, node->level - 1);
- for (i = 0; i < nritems; i++) {
- cond_resched();
- bytenr = btrfs_node_blockptr(node->eb, i);
- ptr_gen = btrfs_node_ptr_generation(node->eb, i);
- if (ptr_gen == trans->transid)
- continue;
- if (!in_block_group(bytenr, rc->block_group) &&
- (node->level > 1 || rc->stage == MOVE_DATA_EXTENTS))
- continue;
- if (tree_block_processed(bytenr, blocksize, rc))
- continue;
-
- readahead_tree_block(rc->extent_root,
- bytenr, blocksize, ptr_gen);
- }
-
- for (i = 0; i < nritems; i++) {
- cond_resched();
- bytenr = btrfs_node_blockptr(node->eb, i);
- ptr_gen = btrfs_node_ptr_generation(node->eb, i);
- if (ptr_gen == trans->transid)
- continue;
- if (!in_block_group(bytenr, rc->block_group) &&
- (node->level > 1 || rc->stage == MOVE_DATA_EXTENTS))
- continue;
- if (tree_block_processed(bytenr, blocksize, rc))
- continue;
- if (!in_block_group(bytenr, rc->block_group) &&
- !check_file_extents(rc, bytenr, blocksize, ptr_gen))
- continue;
-
- block = kmalloc(sizeof(*block), GFP_NOFS);
- if (!block) {
- err = -ENOMEM;
- break;
- }
- block->bytenr = bytenr;
- btrfs_node_key_to_cpu(node->eb, &block->key, i);
- block->level = node->level - 1;
- block->key_ready = 1;
- rb_node = tree_insert(blocks, block->bytenr, &block->rb_node);
- BUG_ON(rb_node);
- }
- if (err)
- free_block_list(blocks);
- return err;
-}
-
-/*
- * find adjacent blocks require processing
- */
-static noinline_for_stack
-int add_adjacent_blocks(struct btrfs_trans_handle *trans,
- struct reloc_control *rc,
- struct backref_cache *cache,
- struct rb_root *blocks, int level,
- struct backref_node **upper)
-{
- struct backref_node *node;
- int ret = 0;
-
- WARN_ON(!list_empty(&cache->pending[level]));
-
- if (list_empty(&cache->pending[level + 1]))
- return 1;
-
- node = list_entry(cache->pending[level + 1].next,
- struct backref_node, lower);
- if (node->eb)
- ret = add_child_blocks(trans, rc, node, blocks);
-
- *upper = node;
- return ret;
-}
-
static int get_tree_block_key(struct reloc_control *rc,
struct tree_block *block)
{
@@ -2371,40 +2696,53 @@
struct btrfs_path *path)
{
struct btrfs_root *root;
- int ret;
+ int release = 0;
+ int ret = 0;
- root = select_one_root(trans, node);
- if (unlikely(!root)) {
- rc->found_old_snapshot = 1;
- update_processed_blocks(rc, node);
+ if (!node)
return 0;
+
+ BUG_ON(node->processed);
+ root = select_one_root(trans, node);
+ if (root == ERR_PTR(-ENOENT)) {
+ update_processed_blocks(rc, node);
+ goto out;
}
- if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID) {
- ret = do_relocation(trans, node, key, path, 1);
- if (ret < 0)
+ if (!root || root->ref_cows) {
+ ret = reserve_metadata_space(trans, rc, node);
+ if (ret)
goto out;
- if (node->level == 0 && rc->stage == UPDATE_DATA_PTRS) {
- ret = replace_file_extents(trans, rc, root,
- node->eb, NULL);
- if (ret < 0)
- goto out;
+ release = 1;
+ }
+
+ if (root) {
+ if (root->ref_cows) {
+ BUG_ON(node->new_bytenr);
+ BUG_ON(!list_empty(&node->list));
+ btrfs_record_root_in_trans(trans, root);
+ root = root->reloc_root;
+ node->new_bytenr = root->node->start;
+ node->root = root;
+ list_add_tail(&node->list, &rc->backref_cache.changed);
+ } else {
+ path->lowest_level = node->level;
+ ret = btrfs_search_slot(trans, root, key, path, 0, 1);
+ btrfs_release_path(root, path);
+ if (ret > 0)
+ ret = 0;
}
- drop_node_buffer(node);
- } else if (!root->ref_cows) {
- path->lowest_level = node->level;
- ret = btrfs_search_slot(trans, root, key, path, 0, 1);
- btrfs_release_path(root, path);
- if (ret < 0)
- goto out;
- } else if (root != node->root) {
- WARN_ON(node->level > 0 || rc->stage != UPDATE_DATA_PTRS);
+ if (!ret)
+ update_processed_blocks(rc, node);
+ } else {
+ ret = do_relocation(trans, rc, node, key, path, 1);
}
-
- update_processed_blocks(rc, node);
- ret = 0;
out:
- drop_node_buffer(node);
+ if (ret || node->level == 0 || node->cowonly) {
+ if (release)
+ release_metadata_space(rc, node);
+ remove_backref_node(&rc->backref_cache, node);
+ }
return ret;
}
@@ -2415,12 +2753,10 @@
int relocate_tree_blocks(struct btrfs_trans_handle *trans,
struct reloc_control *rc, struct rb_root *blocks)
{
- struct backref_cache *cache;
struct backref_node *node;
struct btrfs_path *path;
struct tree_block *block;
struct rb_node *rb_node;
- int level = -1;
int ret;
int err = 0;
@@ -2428,21 +2764,9 @@
if (!path)
return -ENOMEM;
- cache = kmalloc(sizeof(*cache), GFP_NOFS);
- if (!cache) {
- btrfs_free_path(path);
- return -ENOMEM;
- }
-
- backref_cache_init(cache);
-
rb_node = rb_first(blocks);
while (rb_node) {
block = rb_entry(rb_node, struct tree_block, rb_node);
- if (level == -1)
- level = block->level;
- else
- BUG_ON(level != block->level);
if (!block->key_ready)
reada_tree_block(rc, block);
rb_node = rb_next(rb_node);
@@ -2460,7 +2784,7 @@
while (rb_node) {
block = rb_entry(rb_node, struct tree_block, rb_node);
- node = build_backref_tree(rc, cache, &block->key,
+ node = build_backref_tree(rc, &block->key,
block->level, block->bytenr);
if (IS_ERR(node)) {
err = PTR_ERR(node);
@@ -2470,82 +2794,65 @@
ret = relocate_tree_block(trans, rc, node, &block->key,
path);
if (ret < 0) {
- err = ret;
+ if (ret != -EAGAIN || rb_node == rb_first(blocks))
+ err = ret;
goto out;
}
- remove_backref_node(cache, node);
rb_node = rb_next(rb_node);
}
-
- if (level > 0)
- goto out;
-
- free_block_list(blocks);
-
- /*
- * now backrefs of some upper level tree blocks have been cached,
- * try relocating blocks referenced by these upper level blocks.
- */
- while (1) {
- struct backref_node *upper = NULL;
- if (trans->transaction->in_commit ||
- trans->transaction->delayed_refs.flushing)
- break;
-
- ret = add_adjacent_blocks(trans, rc, cache, blocks, level,
- &upper);
- if (ret < 0)
- err = ret;
- if (ret != 0)
- break;
-
- rb_node = rb_first(blocks);
- while (rb_node) {
- block = rb_entry(rb_node, struct tree_block, rb_node);
- if (trans->transaction->in_commit ||
- trans->transaction->delayed_refs.flushing)
- goto out;
- BUG_ON(!block->key_ready);
- node = build_backref_tree(rc, cache, &block->key,
- level, block->bytenr);
- if (IS_ERR(node)) {
- err = PTR_ERR(node);
- goto out;
- }
-
- ret = relocate_tree_block(trans, rc, node,
- &block->key, path);
- if (ret < 0) {
- err = ret;
- goto out;
- }
- remove_backref_node(cache, node);
- rb_node = rb_next(rb_node);
- }
- free_block_list(blocks);
-
- if (upper) {
- ret = link_to_upper(trans, upper, path);
- if (ret < 0) {
- err = ret;
- break;
- }
- remove_backref_node(cache, upper);
- }
- }
out:
free_block_list(blocks);
+ err = finish_pending_nodes(trans, rc, path, err);
- ret = finish_pending_nodes(trans, cache, path);
- if (ret < 0)
- err = ret;
-
- kfree(cache);
btrfs_free_path(path);
return err;
}
static noinline_for_stack
+int prealloc_file_extent_cluster(struct inode *inode,
+ struct file_extent_cluster *cluster)
+{
+ u64 alloc_hint = 0;
+ u64 start;
+ u64 end;
+ u64 offset = BTRFS_I(inode)->index_cnt;
+ u64 num_bytes;
+ int nr = 0;
+ int ret = 0;
+
+ BUG_ON(cluster->start != cluster->boundary[0]);
+ mutex_lock(&inode->i_mutex);
+
+ ret = btrfs_check_data_free_space(inode, cluster->end +
+ 1 - cluster->start);
+ if (ret)
+ goto out;
+
+ while (nr < cluster->nr) {
+ start = cluster->boundary[nr] - offset;
+ if (nr + 1 < cluster->nr)
+ end = cluster->boundary[nr + 1] - 1 - offset;
+ else
+ end = cluster->end - offset;
+
+ lock_extent(&BTRFS_I(inode)->io_tree, start, end, GFP_NOFS);
+ num_bytes = end + 1 - start;
+ ret = btrfs_prealloc_file_range(inode, 0, start,
+ num_bytes, num_bytes,
+ end + 1, &alloc_hint);
+ unlock_extent(&BTRFS_I(inode)->io_tree, start, end, GFP_NOFS);
+ if (ret)
+ break;
+ nr++;
+ }
+ btrfs_free_reserved_data_space(inode, cluster->end +
+ 1 - cluster->start);
+out:
+ mutex_unlock(&inode->i_mutex);
+ return ret;
+}
+
+static noinline_for_stack
int setup_extent_mapping(struct inode *inode, u64 start, u64 end,
u64 block_start)
{
@@ -2588,7 +2895,6 @@
u64 offset = BTRFS_I(inode)->index_cnt;
unsigned long index;
unsigned long last_index;
- unsigned int dirty_page = 0;
struct page *page;
struct file_ra_state *ra;
int nr = 0;
@@ -2601,21 +2907,24 @@
if (!ra)
return -ENOMEM;
- index = (cluster->start - offset) >> PAGE_CACHE_SHIFT;
- last_index = (cluster->end - offset) >> PAGE_CACHE_SHIFT;
-
- mutex_lock(&inode->i_mutex);
-
- i_size_write(inode, cluster->end + 1 - offset);
- ret = setup_extent_mapping(inode, cluster->start - offset,
- cluster->end - offset, cluster->start);
+ ret = prealloc_file_extent_cluster(inode, cluster);
if (ret)
- goto out_unlock;
+ goto out;
file_ra_state_init(ra, inode->i_mapping);
- WARN_ON(cluster->start != cluster->boundary[0]);
+ ret = setup_extent_mapping(inode, cluster->start - offset,
+ cluster->end - offset, cluster->start);
+ if (ret)
+ goto out;
+
+ index = (cluster->start - offset) >> PAGE_CACHE_SHIFT;
+ last_index = (cluster->end - offset) >> PAGE_CACHE_SHIFT;
while (index <= last_index) {
+ ret = btrfs_delalloc_reserve_metadata(inode, PAGE_CACHE_SIZE);
+ if (ret)
+ goto out;
+
page = find_lock_page(inode->i_mapping, index);
if (!page) {
page_cache_sync_readahead(inode->i_mapping,
@@ -2623,8 +2932,10 @@
last_index + 1 - index);
page = grab_cache_page(inode->i_mapping, index);
if (!page) {
+ btrfs_delalloc_release_metadata(inode,
+ PAGE_CACHE_SIZE);
ret = -ENOMEM;
- goto out_unlock;
+ goto out;
}
}
@@ -2640,8 +2951,10 @@
if (!PageUptodate(page)) {
unlock_page(page);
page_cache_release(page);
+ btrfs_delalloc_release_metadata(inode,
+ PAGE_CACHE_SIZE);
ret = -EIO;
- goto out_unlock;
+ goto out;
}
}
@@ -2660,10 +2973,9 @@
EXTENT_BOUNDARY, GFP_NOFS);
nr++;
}
- btrfs_set_extent_delalloc(inode, page_start, page_end, NULL);
+ btrfs_set_extent_delalloc(inode, page_start, page_end, NULL);
set_page_dirty(page);
- dirty_page++;
unlock_extent(&BTRFS_I(inode)->io_tree,
page_start, page_end, GFP_NOFS);
@@ -2671,20 +2983,11 @@
page_cache_release(page);
index++;
- if (nr < cluster->nr &&
- page_end + 1 + offset == cluster->boundary[nr]) {
- balance_dirty_pages_ratelimited_nr(inode->i_mapping,
- dirty_page);
- dirty_page = 0;
- }
- }
- if (dirty_page) {
- balance_dirty_pages_ratelimited_nr(inode->i_mapping,
- dirty_page);
+ balance_dirty_pages_ratelimited(inode->i_mapping);
+ btrfs_throttle(BTRFS_I(inode)->root);
}
WARN_ON(nr != cluster->nr);
-out_unlock:
- mutex_unlock(&inode->i_mutex);
+out:
kfree(ra);
return ret;
}
@@ -2870,9 +3173,6 @@
static int block_use_full_backref(struct reloc_control *rc,
struct extent_buffer *eb)
{
- struct btrfs_path *path;
- struct btrfs_extent_item *ei;
- struct btrfs_key key;
u64 flags;
int ret;
@@ -2880,28 +3180,14 @@
btrfs_header_backref_rev(eb) < BTRFS_MIXED_BACKREF_REV)
return 1;
- path = btrfs_alloc_path();
- BUG_ON(!path);
-
- key.objectid = eb->start;
- key.type = BTRFS_EXTENT_ITEM_KEY;
- key.offset = eb->len;
-
- path->search_commit_root = 1;
- path->skip_locking = 1;
- ret = btrfs_search_slot(NULL, rc->extent_root,
- &key, path, 0, 0);
+ ret = btrfs_lookup_extent_info(NULL, rc->extent_root,
+ eb->start, eb->len, NULL, &flags);
BUG_ON(ret);
- ei = btrfs_item_ptr(path->nodes[0], path->slots[0],
- struct btrfs_extent_item);
- flags = btrfs_extent_flags(path->nodes[0], ei);
- BUG_ON(!(flags & BTRFS_EXTENT_FLAG_TREE_BLOCK));
if (flags & BTRFS_BLOCK_FLAG_FULL_BACKREF)
ret = 1;
else
ret = 0;
- btrfs_free_path(path);
return ret;
}
@@ -3074,22 +3360,10 @@
struct btrfs_extent_inline_ref *iref;
unsigned long ptr;
unsigned long end;
- u32 blocksize;
+ u32 blocksize = btrfs_level_size(rc->extent_root, 0);
int ret;
int err = 0;
- ret = get_new_location(rc->data_inode, NULL, extent_key->objectid,
- extent_key->offset);
- BUG_ON(ret < 0);
- if (ret > 0) {
- /* the relocated data is fragmented */
- rc->extents_skipped++;
- btrfs_release_path(rc->extent_root, path);
- return 0;
- }
-
- blocksize = btrfs_level_size(rc->extent_root, 0);
-
eb = path->nodes[0];
ptr = btrfs_item_ptr_offset(eb, path->slots[0]);
end = ptr + btrfs_item_size_nr(eb, path->slots[0]);
@@ -3170,7 +3444,8 @@
*/
static noinline_for_stack
int find_next_extent(struct btrfs_trans_handle *trans,
- struct reloc_control *rc, struct btrfs_path *path)
+ struct reloc_control *rc, struct btrfs_path *path,
+ struct btrfs_key *extent_key)
{
struct btrfs_key key;
struct extent_buffer *leaf;
@@ -3225,6 +3500,7 @@
rc->search_start = end + 1;
} else {
rc->search_start = key.objectid + key.offset;
+ memcpy(extent_key, &key, sizeof(key));
return 0;
}
}
@@ -3262,12 +3538,49 @@
return 0;
}
+static noinline_for_stack
+int prepare_to_relocate(struct reloc_control *rc)
+{
+ struct btrfs_trans_handle *trans;
+ int ret;
+
+ rc->block_rsv = btrfs_alloc_block_rsv(rc->extent_root);
+ if (!rc->block_rsv)
+ return -ENOMEM;
+
+ /*
+ * reserve some space for creating reloc trees.
+ * btrfs_init_reloc_root will use them when there
+ * is no reservation in transaction handle.
+ */
+ ret = btrfs_block_rsv_add(NULL, rc->extent_root, rc->block_rsv,
+ rc->extent_root->nodesize * 256,
+ &rc->block_rsv_retries);
+ if (ret)
+ return ret;
+
+ rc->block_rsv->refill_used = 1;
+ btrfs_add_durable_block_rsv(rc->extent_root->fs_info, rc->block_rsv);
+
+ memset(&rc->cluster, 0, sizeof(rc->cluster));
+ rc->search_start = rc->block_group->key.objectid;
+ rc->extents_found = 0;
+ rc->nodes_relocated = 0;
+ rc->merging_rsv_size = 0;
+ rc->block_rsv_retries = 0;
+
+ rc->create_reloc_tree = 1;
+ set_reloc_control(rc);
+
+ trans = btrfs_join_transaction(rc->extent_root, 1);
+ btrfs_commit_transaction(trans, rc->extent_root);
+ return 0;
+}
static noinline_for_stack int relocate_block_group(struct reloc_control *rc)
{
struct rb_root blocks = RB_ROOT;
struct btrfs_key key;
- struct file_extent_cluster *cluster;
struct btrfs_trans_handle *trans = NULL;
struct btrfs_path *path;
struct btrfs_extent_item *ei;
@@ -3277,33 +3590,25 @@
int ret;
int err = 0;
- cluster = kzalloc(sizeof(*cluster), GFP_NOFS);
- if (!cluster)
+ path = btrfs_alloc_path();
+ if (!path)
return -ENOMEM;
- path = btrfs_alloc_path();
- if (!path) {
- kfree(cluster);
- return -ENOMEM;
+ ret = prepare_to_relocate(rc);
+ if (ret) {
+ err = ret;
+ goto out_free;
}
- rc->extents_found = 0;
- rc->extents_skipped = 0;
-
- rc->search_start = rc->block_group->key.objectid;
- clear_extent_bits(&rc->processed_blocks, 0, (u64)-1, EXTENT_DIRTY,
- GFP_NOFS);
-
- rc->create_reloc_root = 1;
- set_reloc_control(rc);
-
- trans = btrfs_start_transaction(rc->extent_root, 1);
- btrfs_commit_transaction(trans, rc->extent_root);
-
while (1) {
- trans = btrfs_start_transaction(rc->extent_root, 1);
+ trans = btrfs_start_transaction(rc->extent_root, 0);
- ret = find_next_extent(trans, rc, path);
+ if (update_backref_cache(trans, &rc->backref_cache)) {
+ btrfs_end_transaction(trans, rc->extent_root);
+ continue;
+ }
+
+ ret = find_next_extent(trans, rc, path, &key);
if (ret < 0)
err = ret;
if (ret != 0)
@@ -3313,9 +3618,7 @@
ei = btrfs_item_ptr(path->nodes[0], path->slots[0],
struct btrfs_extent_item);
- btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]);
- item_size = btrfs_item_size_nr(path->nodes[0],
- path->slots[0]);
+ item_size = btrfs_item_size_nr(path->nodes[0], path->slots[0]);
if (item_size >= sizeof(*ei)) {
flags = btrfs_extent_flags(path->nodes[0], ei);
ret = check_extent_flags(flags);
@@ -3356,73 +3659,100 @@
if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
ret = add_tree_block(rc, &key, path, &blocks);
} else if (rc->stage == UPDATE_DATA_PTRS &&
- (flags & BTRFS_EXTENT_FLAG_DATA)) {
+ (flags & BTRFS_EXTENT_FLAG_DATA)) {
ret = add_data_references(rc, &key, path, &blocks);
} else {
btrfs_release_path(rc->extent_root, path);
ret = 0;
}
if (ret < 0) {
- err = 0;
+ err = ret;
break;
}
if (!RB_EMPTY_ROOT(&blocks)) {
ret = relocate_tree_blocks(trans, rc, &blocks);
if (ret < 0) {
- err = ret;
- break;
+ if (ret != -EAGAIN) {
+ err = ret;
+ break;
+ }
+ rc->extents_found--;
+ rc->search_start = key.objectid;
}
}
- nr = trans->blocks_used;
- btrfs_end_transaction(trans, rc->extent_root);
+ ret = btrfs_block_rsv_check(trans, rc->extent_root,
+ rc->block_rsv, 0, 5);
+ if (ret < 0) {
+ if (ret != -EAGAIN) {
+ err = ret;
+ WARN_ON(1);
+ break;
+ }
+ rc->commit_transaction = 1;
+ }
+
+ if (rc->commit_transaction) {
+ rc->commit_transaction = 0;
+ ret = btrfs_commit_transaction(trans, rc->extent_root);
+ BUG_ON(ret);
+ } else {
+ nr = trans->blocks_used;
+ btrfs_end_transaction_throttle(trans, rc->extent_root);
+ btrfs_btree_balance_dirty(rc->extent_root, nr);
+ }
trans = NULL;
- btrfs_btree_balance_dirty(rc->extent_root, nr);
if (rc->stage == MOVE_DATA_EXTENTS &&
(flags & BTRFS_EXTENT_FLAG_DATA)) {
rc->found_file_extent = 1;
ret = relocate_data_extent(rc->data_inode,
- &key, cluster);
+ &key, &rc->cluster);
if (ret < 0) {
err = ret;
break;
}
}
}
- btrfs_free_path(path);
+
+ btrfs_release_path(rc->extent_root, path);
+ clear_extent_bits(&rc->processed_blocks, 0, (u64)-1, EXTENT_DIRTY,
+ GFP_NOFS);
if (trans) {
nr = trans->blocks_used;
- btrfs_end_transaction(trans, rc->extent_root);
+ btrfs_end_transaction_throttle(trans, rc->extent_root);
btrfs_btree_balance_dirty(rc->extent_root, nr);
}
if (!err) {
- ret = relocate_file_extent_cluster(rc->data_inode, cluster);
+ ret = relocate_file_extent_cluster(rc->data_inode,
+ &rc->cluster);
if (ret < 0)
err = ret;
}
- kfree(cluster);
+ rc->create_reloc_tree = 0;
+ set_reloc_control(rc);
- rc->create_reloc_root = 0;
- smp_mb();
+ backref_cache_cleanup(&rc->backref_cache);
+ btrfs_block_rsv_release(rc->extent_root, rc->block_rsv, (u64)-1);
- if (rc->extents_found > 0) {
- trans = btrfs_start_transaction(rc->extent_root, 1);
- btrfs_commit_transaction(trans, rc->extent_root);
- }
+ err = prepare_to_merge(rc, err);
merge_reloc_roots(rc);
+ rc->merge_reloc_tree = 0;
unset_reloc_control(rc);
+ btrfs_block_rsv_release(rc->extent_root, rc->block_rsv, (u64)-1);
/* get rid of pinned extents */
- trans = btrfs_start_transaction(rc->extent_root, 1);
+ trans = btrfs_join_transaction(rc->extent_root, 1);
btrfs_commit_transaction(trans, rc->extent_root);
-
+out_free:
+ btrfs_free_block_rsv(rc->extent_root, rc->block_rsv);
+ btrfs_free_path(path);
return err;
}
@@ -3448,7 +3778,8 @@
btrfs_set_inode_generation(leaf, item, 1);
btrfs_set_inode_size(leaf, item, 0);
btrfs_set_inode_mode(leaf, item, S_IFREG | 0600);
- btrfs_set_inode_flags(leaf, item, BTRFS_INODE_NOCOMPRESS);
+ btrfs_set_inode_flags(leaf, item, BTRFS_INODE_NOCOMPRESS |
+ BTRFS_INODE_PREALLOC);
btrfs_mark_buffer_dirty(leaf);
btrfs_release_path(root, path);
out:
@@ -3460,8 +3791,9 @@
* helper to create inode for data relocation.
* the inode is in data relocation tree and its link count is 0
*/
-static struct inode *create_reloc_inode(struct btrfs_fs_info *fs_info,
- struct btrfs_block_group_cache *group)
+static noinline_for_stack
+struct inode *create_reloc_inode(struct btrfs_fs_info *fs_info,
+ struct btrfs_block_group_cache *group)
{
struct inode *inode = NULL;
struct btrfs_trans_handle *trans;
@@ -3475,8 +3807,9 @@
if (IS_ERR(root))
return ERR_CAST(root);
- trans = btrfs_start_transaction(root, 1);
- BUG_ON(!trans);
+ trans = btrfs_start_transaction(root, 6);
+ if (IS_ERR(trans))
+ return ERR_CAST(trans);
err = btrfs_find_free_objectid(trans, root, objectid, &objectid);
if (err)
@@ -3496,7 +3829,6 @@
out:
nr = trans->blocks_used;
btrfs_end_transaction(trans, root);
-
btrfs_btree_balance_dirty(root, nr);
if (err) {
if (inode)
@@ -3506,6 +3838,21 @@
return inode;
}
+static struct reloc_control *alloc_reloc_control(void)
+{
+ struct reloc_control *rc;
+
+ rc = kzalloc(sizeof(*rc), GFP_NOFS);
+ if (!rc)
+ return NULL;
+
+ INIT_LIST_HEAD(&rc->reloc_roots);
+ backref_cache_init(&rc->backref_cache);
+ mapping_tree_init(&rc->reloc_root_tree);
+ extent_io_tree_init(&rc->processed_blocks, NULL, GFP_NOFS);
+ return rc;
+}
+
/*
* function to relocate all extents in a block group.
*/
@@ -3514,24 +3861,26 @@
struct btrfs_fs_info *fs_info = extent_root->fs_info;
struct reloc_control *rc;
int ret;
+ int rw = 0;
int err = 0;
- rc = kzalloc(sizeof(*rc), GFP_NOFS);
+ rc = alloc_reloc_control();
if (!rc)
return -ENOMEM;
- mapping_tree_init(&rc->reloc_root_tree);
- extent_io_tree_init(&rc->processed_blocks, NULL, GFP_NOFS);
- INIT_LIST_HEAD(&rc->reloc_roots);
+ rc->extent_root = extent_root;
rc->block_group = btrfs_lookup_block_group(fs_info, group_start);
BUG_ON(!rc->block_group);
- btrfs_init_workers(&rc->workers, "relocate",
- fs_info->thread_pool_size, NULL);
-
- rc->extent_root = extent_root;
- btrfs_prepare_block_group_relocation(extent_root, rc->block_group);
+ if (!rc->block_group->ro) {
+ ret = btrfs_set_block_group_ro(extent_root, rc->block_group);
+ if (ret) {
+ err = ret;
+ goto out;
+ }
+ rw = 1;
+ }
rc->data_inode = create_reloc_inode(fs_info, rc->block_group);
if (IS_ERR(rc->data_inode)) {
@@ -3548,9 +3897,6 @@
btrfs_wait_ordered_extents(fs_info->tree_root, 0, 0);
while (1) {
- rc->extents_found = 0;
- rc->extents_skipped = 0;
-
mutex_lock(&fs_info->cleaner_mutex);
btrfs_clean_old_snapshots(fs_info->tree_root);
@@ -3559,7 +3905,7 @@
mutex_unlock(&fs_info->cleaner_mutex);
if (ret < 0) {
err = ret;
- break;
+ goto out;
}
if (rc->extents_found == 0)
@@ -3573,18 +3919,6 @@
invalidate_mapping_pages(rc->data_inode->i_mapping,
0, -1);
rc->stage = UPDATE_DATA_PTRS;
- } else if (rc->stage == UPDATE_DATA_PTRS &&
- rc->extents_skipped >= rc->extents_found) {
- iput(rc->data_inode);
- rc->data_inode = create_reloc_inode(fs_info,
- rc->block_group);
- if (IS_ERR(rc->data_inode)) {
- err = PTR_ERR(rc->data_inode);
- rc->data_inode = NULL;
- break;
- }
- rc->stage = MOVE_DATA_EXTENTS;
- rc->found_file_extent = 0;
}
}
@@ -3597,8 +3931,9 @@
WARN_ON(rc->block_group->reserved > 0);
WARN_ON(btrfs_block_group_used(&rc->block_group->item) > 0);
out:
+ if (err && rw)
+ btrfs_set_block_group_rw(extent_root, rc->block_group);
iput(rc->data_inode);
- btrfs_stop_workers(&rc->workers);
btrfs_put_block_group(rc->block_group);
kfree(rc);
return err;
@@ -3609,7 +3944,7 @@
struct btrfs_trans_handle *trans;
int ret;
- trans = btrfs_start_transaction(root->fs_info->tree_root, 1);
+ trans = btrfs_start_transaction(root->fs_info->tree_root, 0);
memset(&root->root_item.drop_progress, 0,
sizeof(root->root_item.drop_progress));
@@ -3702,20 +4037,20 @@
if (list_empty(&reloc_roots))
goto out;
- rc = kzalloc(sizeof(*rc), GFP_NOFS);
+ rc = alloc_reloc_control();
if (!rc) {
err = -ENOMEM;
goto out;
}
- mapping_tree_init(&rc->reloc_root_tree);
- INIT_LIST_HEAD(&rc->reloc_roots);
- btrfs_init_workers(&rc->workers, "relocate",
- root->fs_info->thread_pool_size, NULL);
rc->extent_root = root->fs_info->extent_root;
set_reloc_control(rc);
+ trans = btrfs_join_transaction(rc->extent_root, 1);
+
+ rc->merge_reloc_tree = 1;
+
while (!list_empty(&reloc_roots)) {
reloc_root = list_entry(reloc_roots.next,
struct btrfs_root, root_list);
@@ -3735,20 +4070,16 @@
fs_root->reloc_root = reloc_root;
}
- trans = btrfs_start_transaction(rc->extent_root, 1);
btrfs_commit_transaction(trans, rc->extent_root);
merge_reloc_roots(rc);
unset_reloc_control(rc);
- trans = btrfs_start_transaction(rc->extent_root, 1);
+ trans = btrfs_join_transaction(rc->extent_root, 1);
btrfs_commit_transaction(trans, rc->extent_root);
out:
- if (rc) {
- btrfs_stop_workers(&rc->workers);
- kfree(rc);
- }
+ kfree(rc);
while (!list_empty(&reloc_roots)) {
reloc_root = list_entry(reloc_roots.next,
struct btrfs_root, root_list);
@@ -3814,3 +4145,130 @@
btrfs_put_ordered_extent(ordered);
return 0;
}
+
+void btrfs_reloc_cow_block(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root, struct extent_buffer *buf,
+ struct extent_buffer *cow)
+{
+ struct reloc_control *rc;
+ struct backref_node *node;
+ int first_cow = 0;
+ int level;
+ int ret;
+
+ rc = root->fs_info->reloc_ctl;
+ if (!rc)
+ return;
+
+ BUG_ON(rc->stage == UPDATE_DATA_PTRS &&
+ root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID);
+
+ level = btrfs_header_level(buf);
+ if (btrfs_header_generation(buf) <=
+ btrfs_root_last_snapshot(&root->root_item))
+ first_cow = 1;
+
+ if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID &&
+ rc->create_reloc_tree) {
+ WARN_ON(!first_cow && level == 0);
+
+ node = rc->backref_cache.path[level];
+ BUG_ON(node->bytenr != buf->start &&
+ node->new_bytenr != buf->start);
+
+ drop_node_buffer(node);
+ extent_buffer_get(cow);
+ node->eb = cow;
+ node->new_bytenr = cow->start;
+
+ if (!node->pending) {
+ list_move_tail(&node->list,
+ &rc->backref_cache.pending[level]);
+ node->pending = 1;
+ }
+
+ if (first_cow)
+ __mark_block_processed(rc, node);
+
+ if (first_cow && level > 0)
+ rc->nodes_relocated += buf->len;
+ }
+
+ if (level == 0 && first_cow && rc->stage == UPDATE_DATA_PTRS) {
+ ret = replace_file_extents(trans, rc, root, cow);
+ BUG_ON(ret);
+ }
+}
+
+/*
+ * called before creating snapshot. it calculates metadata reservation
+ * requried for relocating tree blocks in the snapshot
+ */
+void btrfs_reloc_pre_snapshot(struct btrfs_trans_handle *trans,
+ struct btrfs_pending_snapshot *pending,
+ u64 *bytes_to_reserve)
+{
+ struct btrfs_root *root;
+ struct reloc_control *rc;
+
+ root = pending->root;
+ if (!root->reloc_root)
+ return;
+
+ rc = root->fs_info->reloc_ctl;
+ if (!rc->merge_reloc_tree)
+ return;
+
+ root = root->reloc_root;
+ BUG_ON(btrfs_root_refs(&root->root_item) == 0);
+ /*
+ * relocation is in the stage of merging trees. the space
+ * used by merging a reloc tree is twice the size of
+ * relocated tree nodes in the worst case. half for cowing
+ * the reloc tree, half for cowing the fs tree. the space
+ * used by cowing the reloc tree will be freed after the
+ * tree is dropped. if we create snapshot, cowing the fs
+ * tree may use more space than it frees. so we need
+ * reserve extra space.
+ */
+ *bytes_to_reserve += rc->nodes_relocated;
+}
+
+/*
+ * called after snapshot is created. migrate block reservation
+ * and create reloc root for the newly created snapshot
+ */
+void btrfs_reloc_post_snapshot(struct btrfs_trans_handle *trans,
+ struct btrfs_pending_snapshot *pending)
+{
+ struct btrfs_root *root = pending->root;
+ struct btrfs_root *reloc_root;
+ struct btrfs_root *new_root;
+ struct reloc_control *rc;
+ int ret;
+
+ if (!root->reloc_root)
+ return;
+
+ rc = root->fs_info->reloc_ctl;
+ rc->merging_rsv_size += rc->nodes_relocated;
+
+ if (rc->merge_reloc_tree) {
+ ret = btrfs_block_rsv_migrate(&pending->block_rsv,
+ rc->block_rsv,
+ rc->nodes_relocated);
+ BUG_ON(ret);
+ }
+
+ new_root = pending->snap;
+ reloc_root = create_reloc_root(trans, root->reloc_root,
+ new_root->root_key.objectid);
+
+ __add_reloc_root(reloc_root);
+ new_root->reloc_root = reloc_root;
+
+ if (rc->create_reloc_tree) {
+ ret = clone_backref_node(trans, rc, root, reloc_root);
+ BUG_ON(ret);
+ }
+}
diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c
index 67fa2d2..2d958be 100644
--- a/fs/btrfs/root-tree.c
+++ b/fs/btrfs/root-tree.c
@@ -259,6 +259,8 @@
struct extent_buffer *leaf;
struct btrfs_path *path;
struct btrfs_key key;
+ struct btrfs_key root_key;
+ struct btrfs_root *root;
int err = 0;
int ret;
@@ -270,6 +272,9 @@
key.type = BTRFS_ORPHAN_ITEM_KEY;
key.offset = 0;
+ root_key.type = BTRFS_ROOT_ITEM_KEY;
+ root_key.offset = (u64)-1;
+
while (1) {
ret = btrfs_search_slot(NULL, tree_root, &key, path, 0, 0);
if (ret < 0) {
@@ -294,13 +299,25 @@
key.type != BTRFS_ORPHAN_ITEM_KEY)
break;
- ret = btrfs_find_dead_roots(tree_root, key.offset);
- if (ret) {
+ root_key.objectid = key.offset;
+ key.offset++;
+
+ root = btrfs_read_fs_root_no_name(tree_root->fs_info,
+ &root_key);
+ if (!IS_ERR(root))
+ continue;
+
+ ret = PTR_ERR(root);
+ if (ret != -ENOENT) {
err = ret;
break;
}
- key.offset++;
+ ret = btrfs_find_dead_roots(tree_root, root_key.objectid);
+ if (ret) {
+ err = ret;
+ break;
+ }
}
btrfs_free_path(path);
@@ -313,7 +330,6 @@
{
struct btrfs_path *path;
int ret;
- u32 refs;
struct btrfs_root_item *ri;
struct extent_buffer *leaf;
@@ -327,8 +343,6 @@
leaf = path->nodes[0];
ri = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_root_item);
- refs = btrfs_disk_root_refs(leaf, ri);
- BUG_ON(refs != 0);
ret = btrfs_del_item(trans, root, path);
out:
btrfs_free_path(path);
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 2909a03..f2393b3 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -360,6 +360,8 @@
*/
dir_id = btrfs_super_root_dir(&root->fs_info->super_copy);
di = btrfs_lookup_dir_item(NULL, root, path, dir_id, "default", 7, 0);
+ if (IS_ERR(di))
+ return ERR_CAST(di);
if (!di) {
/*
* Ok the default dir item isn't there. This is weird since
@@ -390,8 +392,8 @@
location.offset = 0;
inode = btrfs_iget(sb, &location, new_root, &new);
- if (!inode)
- return ERR_PTR(-ENOMEM);
+ if (IS_ERR(inode))
+ return ERR_CAST(inode);
/*
* If we're just mounting the root most subvol put the inode and return
@@ -498,7 +500,7 @@
btrfs_start_delalloc_inodes(root, 0);
btrfs_wait_ordered_extents(root, 0, 0);
- trans = btrfs_start_transaction(root, 1);
+ trans = btrfs_start_transaction(root, 0);
ret = btrfs_commit_transaction(trans, root);
return ret;
}
@@ -694,11 +696,11 @@
if (btrfs_super_log_root(&root->fs_info->super_copy) != 0)
return -EINVAL;
- /* recover relocation */
- ret = btrfs_recover_relocation(root);
+ ret = btrfs_cleanup_fs_roots(root->fs_info);
WARN_ON(ret);
- ret = btrfs_cleanup_fs_roots(root->fs_info);
+ /* recover relocation */
+ ret = btrfs_recover_relocation(root);
WARN_ON(ret);
sb->s_flags &= ~MS_RDONLY;
@@ -714,34 +716,18 @@
struct list_head *head = &root->fs_info->space_info;
struct btrfs_space_info *found;
u64 total_used = 0;
- u64 data_used = 0;
int bits = dentry->d_sb->s_blocksize_bits;
__be32 *fsid = (__be32 *)root->fs_info->fsid;
rcu_read_lock();
- list_for_each_entry_rcu(found, head, list) {
- if (found->flags & (BTRFS_BLOCK_GROUP_DUP|
- BTRFS_BLOCK_GROUP_RAID10|
- BTRFS_BLOCK_GROUP_RAID1)) {
- total_used += found->bytes_used;
- if (found->flags & BTRFS_BLOCK_GROUP_DATA)
- data_used += found->bytes_used;
- else
- data_used += found->total_bytes;
- }
-
- total_used += found->bytes_used;
- if (found->flags & BTRFS_BLOCK_GROUP_DATA)
- data_used += found->bytes_used;
- else
- data_used += found->total_bytes;
- }
+ list_for_each_entry_rcu(found, head, list)
+ total_used += found->disk_used;
rcu_read_unlock();
buf->f_namelen = BTRFS_NAME_LEN;
buf->f_blocks = btrfs_super_total_bytes(disk_super) >> bits;
buf->f_bfree = buf->f_blocks - (total_used >> bits);
- buf->f_bavail = buf->f_blocks - (data_used >> bits);
+ buf->f_bavail = buf->f_bfree;
buf->f_bsize = dentry->d_sb->s_blocksize;
buf->f_type = BTRFS_SUPER_MAGIC;
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 2cb1160..66e4c66 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -165,54 +165,89 @@
TRANS_USERSPACE,
};
-static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root,
- int num_blocks, int type)
+static int may_wait_transaction(struct btrfs_root *root, int type)
{
- struct btrfs_trans_handle *h =
- kmem_cache_alloc(btrfs_trans_handle_cachep, GFP_NOFS);
- int ret;
-
- mutex_lock(&root->fs_info->trans_mutex);
if (!root->fs_info->log_root_recovering &&
((type == TRANS_START && !root->fs_info->open_ioctl_trans) ||
type == TRANS_USERSPACE))
+ return 1;
+ return 0;
+}
+
+static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root,
+ u64 num_items, int type)
+{
+ struct btrfs_trans_handle *h;
+ struct btrfs_transaction *cur_trans;
+ int retries = 0;
+ int ret;
+again:
+ h = kmem_cache_alloc(btrfs_trans_handle_cachep, GFP_NOFS);
+ if (!h)
+ return ERR_PTR(-ENOMEM);
+
+ mutex_lock(&root->fs_info->trans_mutex);
+ if (may_wait_transaction(root, type))
wait_current_trans(root);
+
ret = join_transaction(root);
BUG_ON(ret);
- h->transid = root->fs_info->running_transaction->transid;
- h->transaction = root->fs_info->running_transaction;
- h->blocks_reserved = num_blocks;
+ cur_trans = root->fs_info->running_transaction;
+ cur_trans->use_count++;
+ mutex_unlock(&root->fs_info->trans_mutex);
+
+ h->transid = cur_trans->transid;
+ h->transaction = cur_trans;
h->blocks_used = 0;
h->block_group = 0;
- h->alloc_exclude_nr = 0;
- h->alloc_exclude_start = 0;
+ h->bytes_reserved = 0;
h->delayed_ref_updates = 0;
+ h->block_rsv = NULL;
+
+ smp_mb();
+ if (cur_trans->blocked && may_wait_transaction(root, type)) {
+ btrfs_commit_transaction(h, root);
+ goto again;
+ }
+
+ if (num_items > 0) {
+ ret = btrfs_trans_reserve_metadata(h, root, num_items,
+ &retries);
+ if (ret == -EAGAIN) {
+ btrfs_commit_transaction(h, root);
+ goto again;
+ }
+ if (ret < 0) {
+ btrfs_end_transaction(h, root);
+ return ERR_PTR(ret);
+ }
+ }
+
+ mutex_lock(&root->fs_info->trans_mutex);
+ record_root_in_trans(h, root);
+ mutex_unlock(&root->fs_info->trans_mutex);
if (!current->journal_info && type != TRANS_USERSPACE)
current->journal_info = h;
-
- root->fs_info->running_transaction->use_count++;
- record_root_in_trans(h, root);
- mutex_unlock(&root->fs_info->trans_mutex);
return h;
}
struct btrfs_trans_handle *btrfs_start_transaction(struct btrfs_root *root,
- int num_blocks)
+ int num_items)
{
- return start_transaction(root, num_blocks, TRANS_START);
+ return start_transaction(root, num_items, TRANS_START);
}
struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root,
int num_blocks)
{
- return start_transaction(root, num_blocks, TRANS_JOIN);
+ return start_transaction(root, 0, TRANS_JOIN);
}
struct btrfs_trans_handle *btrfs_start_ioctl_transaction(struct btrfs_root *r,
int num_blocks)
{
- return start_transaction(r, num_blocks, TRANS_USERSPACE);
+ return start_transaction(r, 0, TRANS_USERSPACE);
}
/* wait for a transaction commit to be fully complete */
@@ -286,10 +321,36 @@
mutex_unlock(&root->fs_info->trans_mutex);
}
+static int should_end_transaction(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root)
+{
+ int ret;
+ ret = btrfs_block_rsv_check(trans, root,
+ &root->fs_info->global_block_rsv, 0, 5);
+ return ret ? 1 : 0;
+}
+
+int btrfs_should_end_transaction(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root)
+{
+ struct btrfs_transaction *cur_trans = trans->transaction;
+ int updates;
+
+ if (cur_trans->blocked || cur_trans->delayed_refs.flushing)
+ return 1;
+
+ updates = trans->delayed_ref_updates;
+ trans->delayed_ref_updates = 0;
+ if (updates)
+ btrfs_run_delayed_refs(trans, root, updates);
+
+ return should_end_transaction(trans, root);
+}
+
static int __btrfs_end_transaction(struct btrfs_trans_handle *trans,
struct btrfs_root *root, int throttle)
{
- struct btrfs_transaction *cur_trans;
+ struct btrfs_transaction *cur_trans = trans->transaction;
struct btrfs_fs_info *info = root->fs_info;
int count = 0;
@@ -313,9 +374,21 @@
count++;
}
+ btrfs_trans_release_metadata(trans, root);
+
+ if (!root->fs_info->open_ioctl_trans &&
+ should_end_transaction(trans, root))
+ trans->transaction->blocked = 1;
+
+ if (cur_trans->blocked && !cur_trans->in_commit) {
+ if (throttle)
+ return btrfs_commit_transaction(trans, root);
+ else
+ wake_up_process(info->transaction_kthread);
+ }
+
mutex_lock(&info->trans_mutex);
- cur_trans = info->running_transaction;
- WARN_ON(cur_trans != trans->transaction);
+ WARN_ON(cur_trans != info->running_transaction);
WARN_ON(cur_trans->num_writers < 1);
cur_trans->num_writers--;
@@ -603,6 +676,7 @@
btrfs_free_log(trans, root);
btrfs_update_reloc_root(trans, root);
+ btrfs_orphan_commit_root(trans, root);
if (root->commit_root != root->node) {
switch_commit_root(root);
@@ -627,30 +701,30 @@
int btrfs_defrag_root(struct btrfs_root *root, int cacheonly)
{
struct btrfs_fs_info *info = root->fs_info;
- int ret;
struct btrfs_trans_handle *trans;
+ int ret;
unsigned long nr;
- smp_mb();
- if (root->defrag_running)
+ if (xchg(&root->defrag_running, 1))
return 0;
- trans = btrfs_start_transaction(root, 1);
+
while (1) {
- root->defrag_running = 1;
+ trans = btrfs_start_transaction(root, 0);
+ if (IS_ERR(trans))
+ return PTR_ERR(trans);
+
ret = btrfs_defrag_leaves(trans, root, cacheonly);
+
nr = trans->blocks_used;
btrfs_end_transaction(trans, root);
btrfs_btree_balance_dirty(info->tree_root, nr);
cond_resched();
- trans = btrfs_start_transaction(root, 1);
if (root->fs_info->closing || ret != -EAGAIN)
break;
}
root->defrag_running = 0;
- smp_mb();
- btrfs_end_transaction(trans, root);
- return 0;
+ return ret;
}
#if 0
@@ -758,47 +832,63 @@
struct btrfs_root *root = pending->root;
struct btrfs_root *parent_root;
struct inode *parent_inode;
+ struct dentry *dentry;
struct extent_buffer *tmp;
struct extent_buffer *old;
int ret;
- u64 objectid;
- int namelen;
+ int retries = 0;
+ u64 to_reserve = 0;
u64 index = 0;
-
- parent_inode = pending->dentry->d_parent->d_inode;
- parent_root = BTRFS_I(parent_inode)->root;
+ u64 objectid;
new_root_item = kmalloc(sizeof(*new_root_item), GFP_NOFS);
if (!new_root_item) {
- ret = -ENOMEM;
+ pending->error = -ENOMEM;
goto fail;
}
+
ret = btrfs_find_free_objectid(trans, tree_root, 0, &objectid);
- if (ret)
+ if (ret) {
+ pending->error = ret;
goto fail;
+ }
+
+ btrfs_reloc_pre_snapshot(trans, pending, &to_reserve);
+ btrfs_orphan_pre_snapshot(trans, pending, &to_reserve);
+
+ if (to_reserve > 0) {
+ ret = btrfs_block_rsv_add(trans, root, &pending->block_rsv,
+ to_reserve, &retries);
+ if (ret) {
+ pending->error = ret;
+ goto fail;
+ }
+ }
key.objectid = objectid;
- /* record when the snapshot was created in key.offset */
- key.offset = trans->transid;
- btrfs_set_key_type(&key, BTRFS_ROOT_ITEM_KEY);
+ key.offset = (u64)-1;
+ key.type = BTRFS_ROOT_ITEM_KEY;
- memcpy(&pending->root_key, &key, sizeof(key));
- pending->root_key.offset = (u64)-1;
+ trans->block_rsv = &pending->block_rsv;
+ dentry = pending->dentry;
+ parent_inode = dentry->d_parent->d_inode;
+ parent_root = BTRFS_I(parent_inode)->root;
record_root_in_trans(trans, parent_root);
+
/*
* insert the directory item
*/
- namelen = strlen(pending->name);
ret = btrfs_set_inode_index(parent_inode, &index);
BUG_ON(ret);
ret = btrfs_insert_dir_item(trans, parent_root,
- pending->name, namelen,
- parent_inode->i_ino,
- &pending->root_key, BTRFS_FT_DIR, index);
+ dentry->d_name.name, dentry->d_name.len,
+ parent_inode->i_ino, &key,
+ BTRFS_FT_DIR, index);
BUG_ON(ret);
- btrfs_i_size_write(parent_inode, parent_inode->i_size + namelen * 2);
+ btrfs_i_size_write(parent_inode, parent_inode->i_size +
+ dentry->d_name.len * 2);
ret = btrfs_update_inode(trans, parent_root, parent_inode);
BUG_ON(ret);
@@ -815,22 +905,32 @@
free_extent_buffer(old);
btrfs_set_root_node(new_root_item, tmp);
- ret = btrfs_insert_root(trans, root->fs_info->tree_root, &key,
- new_root_item);
- BUG_ON(ret);
+ /* record when the snapshot was created in key.offset */
+ key.offset = trans->transid;
+ ret = btrfs_insert_root(trans, tree_root, &key, new_root_item);
btrfs_tree_unlock(tmp);
free_extent_buffer(tmp);
-
- ret = btrfs_add_root_ref(trans, parent_root->fs_info->tree_root,
- pending->root_key.objectid,
- parent_root->root_key.objectid,
- parent_inode->i_ino, index, pending->name,
- namelen);
BUG_ON(ret);
+ /*
+ * insert root back/forward references
+ */
+ ret = btrfs_add_root_ref(trans, tree_root, objectid,
+ parent_root->root_key.objectid,
+ parent_inode->i_ino, index,
+ dentry->d_name.name, dentry->d_name.len);
+ BUG_ON(ret);
+
+ key.offset = (u64)-1;
+ pending->snap = btrfs_read_fs_root_no_name(root->fs_info, &key);
+ BUG_ON(IS_ERR(pending->snap));
+
+ btrfs_reloc_post_snapshot(trans, pending);
+ btrfs_orphan_post_snapshot(trans, pending);
fail:
kfree(new_root_item);
- return ret;
+ btrfs_block_rsv_release(root, &pending->block_rsv, (u64)-1);
+ return 0;
}
/*
@@ -878,6 +978,16 @@
return ret;
}
+int btrfs_transaction_blocked(struct btrfs_fs_info *info)
+{
+ int ret = 0;
+ spin_lock(&info->new_trans_lock);
+ if (info->running_transaction)
+ ret = info->running_transaction->blocked;
+ spin_unlock(&info->new_trans_lock);
+ return ret;
+}
+
int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
@@ -899,6 +1009,8 @@
ret = btrfs_run_delayed_refs(trans, root, 0);
BUG_ON(ret);
+ btrfs_trans_release_metadata(trans, root);
+
cur_trans = trans->transaction;
/*
* set the flushing flag so procs in this transaction have to
@@ -951,9 +1063,6 @@
snap_pending = 1;
WARN_ON(cur_trans != trans->transaction);
- prepare_to_wait(&cur_trans->writer_wait, &wait,
- TASK_UNINTERRUPTIBLE);
-
if (cur_trans->num_writers > 1)
timeout = MAX_SCHEDULE_TIMEOUT;
else if (should_grow)
@@ -976,6 +1085,9 @@
*/
btrfs_run_ordered_operations(root, 1);
+ prepare_to_wait(&cur_trans->writer_wait, &wait,
+ TASK_UNINTERRUPTIBLE);
+
smp_mb();
if (cur_trans->num_writers > 1 || should_grow)
schedule_timeout(timeout);
@@ -1103,9 +1215,9 @@
if (btrfs_header_backref_rev(root->node) <
BTRFS_MIXED_BACKREF_REV)
- btrfs_drop_snapshot(root, 0);
+ btrfs_drop_snapshot(root, NULL, 0);
else
- btrfs_drop_snapshot(root, 1);
+ btrfs_drop_snapshot(root, NULL, 1);
}
return 0;
}
diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h
index 93c7ccb..e104986 100644
--- a/fs/btrfs/transaction.h
+++ b/fs/btrfs/transaction.h
@@ -45,20 +45,23 @@
struct btrfs_trans_handle {
u64 transid;
+ u64 block_group;
+ u64 bytes_reserved;
unsigned long blocks_reserved;
unsigned long blocks_used;
- struct btrfs_transaction *transaction;
- u64 block_group;
- u64 alloc_exclude_start;
- u64 alloc_exclude_nr;
unsigned long delayed_ref_updates;
+ struct btrfs_transaction *transaction;
+ struct btrfs_block_rsv *block_rsv;
};
struct btrfs_pending_snapshot {
struct dentry *dentry;
struct btrfs_root *root;
- char *name;
- struct btrfs_key root_key;
+ struct btrfs_root *snap;
+ /* block reservation for the operation */
+ struct btrfs_block_rsv block_rsv;
+ /* extra metadata reseration for relocation */
+ int error;
struct list_head list;
};
@@ -85,11 +88,11 @@
int btrfs_end_transaction(struct btrfs_trans_handle *trans,
struct btrfs_root *root);
struct btrfs_trans_handle *btrfs_start_transaction(struct btrfs_root *root,
- int num_blocks);
+ int num_items);
struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root,
- int num_blocks);
+ int num_blocks);
struct btrfs_trans_handle *btrfs_start_ioctl_transaction(struct btrfs_root *r,
- int num_blocks);
+ int num_blocks);
int btrfs_write_and_wait_transaction(struct btrfs_trans_handle *trans,
struct btrfs_root *root);
int btrfs_commit_tree_roots(struct btrfs_trans_handle *trans,
@@ -103,6 +106,8 @@
struct btrfs_root *root);
int btrfs_end_transaction_throttle(struct btrfs_trans_handle *trans,
struct btrfs_root *root);
+int btrfs_should_end_transaction(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root);
void btrfs_throttle(struct btrfs_root *root);
int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans,
struct btrfs_root *root);
@@ -112,5 +117,6 @@
struct extent_io_tree *dirty_pages, int mark);
int btrfs_wait_marked_extents(struct btrfs_root *root,
struct extent_io_tree *dirty_pages, int mark);
+int btrfs_transaction_blocked(struct btrfs_fs_info *info);
int btrfs_transaction_in_commit(struct btrfs_fs_info *info);
#endif
diff --git a/fs/btrfs/tree-defrag.c b/fs/btrfs/tree-defrag.c
index b10eacd..f7ac8e0 100644
--- a/fs/btrfs/tree-defrag.c
+++ b/fs/btrfs/tree-defrag.c
@@ -117,13 +117,14 @@
path->nodes[1], 0,
cache_only, &last_ret,
&root->defrag_progress);
- WARN_ON(ret && ret != -EAGAIN);
+ if (ret) {
+ WARN_ON(ret == -EAGAIN);
+ goto out;
+ }
if (next_key_ret == 0) {
memcpy(&root->defrag_progress, &key, sizeof(key));
ret = -EAGAIN;
}
-
- btrfs_release_path(root, path);
out:
if (path)
btrfs_free_path(path);
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index af57dd2..fb102a9 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -135,6 +135,7 @@
struct btrfs_root *root)
{
int ret;
+ int err = 0;
mutex_lock(&root->log_mutex);
if (root->log_root) {
@@ -155,17 +156,19 @@
mutex_lock(&root->fs_info->tree_log_mutex);
if (!root->fs_info->log_root_tree) {
ret = btrfs_init_log_root_tree(trans, root->fs_info);
- BUG_ON(ret);
+ if (ret)
+ err = ret;
}
- if (!root->log_root) {
+ if (err == 0 && !root->log_root) {
ret = btrfs_add_log_tree(trans, root);
- BUG_ON(ret);
+ if (ret)
+ err = ret;
}
mutex_unlock(&root->fs_info->tree_log_mutex);
root->log_batch++;
atomic_inc(&root->log_writers);
mutex_unlock(&root->log_mutex);
- return 0;
+ return err;
}
/*
@@ -376,7 +379,7 @@
BUG_ON(ret);
}
} else if (ret) {
- BUG();
+ return ret;
}
dst_ptr = btrfs_item_ptr_offset(path->nodes[0],
path->slots[0]);
@@ -1699,9 +1702,9 @@
next = btrfs_find_create_tree_block(root, bytenr, blocksize);
- wc->process_func(root, next, wc, ptr_gen);
-
if (*level == 1) {
+ wc->process_func(root, next, wc, ptr_gen);
+
path->slots[*level]++;
if (wc->free) {
btrfs_read_buffer(next, ptr_gen);
@@ -1734,35 +1737,7 @@
WARN_ON(*level < 0);
WARN_ON(*level >= BTRFS_MAX_LEVEL);
- if (path->nodes[*level] == root->node)
- parent = path->nodes[*level];
- else
- parent = path->nodes[*level + 1];
-
- bytenr = path->nodes[*level]->start;
-
- blocksize = btrfs_level_size(root, *level);
- root_owner = btrfs_header_owner(parent);
- root_gen = btrfs_header_generation(parent);
-
- wc->process_func(root, path->nodes[*level], wc,
- btrfs_header_generation(path->nodes[*level]));
-
- if (wc->free) {
- next = path->nodes[*level];
- btrfs_tree_lock(next);
- clean_tree_block(trans, root, next);
- btrfs_set_lock_blocking(next);
- btrfs_wait_tree_block_writeback(next);
- btrfs_tree_unlock(next);
-
- WARN_ON(root_owner != BTRFS_TREE_LOG_OBJECTID);
- ret = btrfs_free_reserved_extent(root, bytenr, blocksize);
- BUG_ON(ret);
- }
- free_extent_buffer(path->nodes[*level]);
- path->nodes[*level] = NULL;
- *level += 1;
+ path->slots[*level] = btrfs_header_nritems(path->nodes[*level]);
cond_resched();
return 0;
@@ -1781,7 +1756,7 @@
for (i = *level; i < BTRFS_MAX_LEVEL - 1 && path->nodes[i]; i++) {
slot = path->slots[i];
- if (slot < btrfs_header_nritems(path->nodes[i]) - 1) {
+ if (slot + 1 < btrfs_header_nritems(path->nodes[i])) {
struct extent_buffer *node;
node = path->nodes[i];
path->slots[i]++;
@@ -2047,7 +2022,6 @@
mutex_unlock(&log_root_tree->log_mutex);
ret = update_log_root(trans, log);
- BUG_ON(ret);
mutex_lock(&log_root_tree->log_mutex);
if (atomic_dec_and_test(&log_root_tree->log_writers)) {
@@ -2056,6 +2030,15 @@
wake_up(&log_root_tree->log_writer_wait);
}
+ if (ret) {
+ BUG_ON(ret != -ENOSPC);
+ root->fs_info->last_trans_log_full_commit = trans->transid;
+ btrfs_wait_marked_extents(log, &log->dirty_log_pages, mark);
+ mutex_unlock(&log_root_tree->log_mutex);
+ ret = -EAGAIN;
+ goto out;
+ }
+
index2 = log_root_tree->log_transid % 2;
if (atomic_read(&log_root_tree->log_commit[index2])) {
btrfs_wait_marked_extents(log, &log->dirty_log_pages, mark);
@@ -2129,15 +2112,10 @@
return 0;
}
-/*
- * free all the extents used by the tree log. This should be called
- * at commit time of the full transaction
- */
-int btrfs_free_log(struct btrfs_trans_handle *trans, struct btrfs_root *root)
+static void free_log_tree(struct btrfs_trans_handle *trans,
+ struct btrfs_root *log)
{
int ret;
- struct btrfs_root *log;
- struct key;
u64 start;
u64 end;
struct walk_control wc = {
@@ -2145,10 +2123,6 @@
.process_func = process_one_buffer
};
- if (!root->log_root || root->fs_info->log_root_recovering)
- return 0;
-
- log = root->log_root;
ret = walk_log_tree(trans, log, &wc);
BUG_ON(ret);
@@ -2162,14 +2136,30 @@
EXTENT_DIRTY | EXTENT_NEW, GFP_NOFS);
}
- if (log->log_transid > 0) {
- ret = btrfs_del_root(trans, root->fs_info->log_root_tree,
- &log->root_key);
- BUG_ON(ret);
- }
- root->log_root = NULL;
free_extent_buffer(log->node);
kfree(log);
+}
+
+/*
+ * free all the extents used by the tree log. This should be called
+ * at commit time of the full transaction
+ */
+int btrfs_free_log(struct btrfs_trans_handle *trans, struct btrfs_root *root)
+{
+ if (root->log_root) {
+ free_log_tree(trans, root->log_root);
+ root->log_root = NULL;
+ }
+ return 0;
+}
+
+int btrfs_free_log_root_tree(struct btrfs_trans_handle *trans,
+ struct btrfs_fs_info *fs_info)
+{
+ if (fs_info->log_root_tree) {
+ free_log_tree(trans, fs_info->log_root_tree);
+ fs_info->log_root_tree = NULL;
+ }
return 0;
}
@@ -2203,6 +2193,7 @@
struct btrfs_dir_item *di;
struct btrfs_path *path;
int ret;
+ int err = 0;
int bytes_del = 0;
if (BTRFS_I(dir)->logged_trans < trans->transid)
@@ -2218,7 +2209,11 @@
path = btrfs_alloc_path();
di = btrfs_lookup_dir_item(trans, log, path, dir->i_ino,
name, name_len, -1);
- if (di && !IS_ERR(di)) {
+ if (IS_ERR(di)) {
+ err = PTR_ERR(di);
+ goto fail;
+ }
+ if (di) {
ret = btrfs_delete_one_dir_name(trans, log, path, di);
bytes_del += name_len;
BUG_ON(ret);
@@ -2226,7 +2221,11 @@
btrfs_release_path(log, path);
di = btrfs_lookup_dir_index_item(trans, log, path, dir->i_ino,
index, name, name_len, -1);
- if (di && !IS_ERR(di)) {
+ if (IS_ERR(di)) {
+ err = PTR_ERR(di);
+ goto fail;
+ }
+ if (di) {
ret = btrfs_delete_one_dir_name(trans, log, path, di);
bytes_del += name_len;
BUG_ON(ret);
@@ -2244,6 +2243,10 @@
btrfs_release_path(log, path);
ret = btrfs_search_slot(trans, log, &key, path, 0, 1);
+ if (ret < 0) {
+ err = ret;
+ goto fail;
+ }
if (ret == 0) {
struct btrfs_inode_item *item;
u64 i_size;
@@ -2261,9 +2264,13 @@
ret = 0;
btrfs_release_path(log, path);
}
-
+fail:
btrfs_free_path(path);
mutex_unlock(&BTRFS_I(dir)->log_mutex);
+ if (ret == -ENOSPC) {
+ root->fs_info->last_trans_log_full_commit = trans->transid;
+ ret = 0;
+ }
btrfs_end_log_trans(root);
return 0;
@@ -2291,6 +2298,10 @@
ret = btrfs_del_inode_ref(trans, log, name, name_len, inode->i_ino,
dirid, &index);
mutex_unlock(&BTRFS_I(inode)->log_mutex);
+ if (ret == -ENOSPC) {
+ root->fs_info->last_trans_log_full_commit = trans->transid;
+ ret = 0;
+ }
btrfs_end_log_trans(root);
return ret;
@@ -2318,7 +2329,8 @@
else
key.type = BTRFS_DIR_LOG_INDEX_KEY;
ret = btrfs_insert_empty_item(trans, log, path, &key, sizeof(*item));
- BUG_ON(ret);
+ if (ret)
+ return ret;
item = btrfs_item_ptr(path->nodes[0], path->slots[0],
struct btrfs_dir_log_item);
@@ -2343,6 +2355,7 @@
struct btrfs_key max_key;
struct btrfs_root *log = root->log_root;
struct extent_buffer *src;
+ int err = 0;
int ret;
int i;
int nritems;
@@ -2405,6 +2418,10 @@
ret = overwrite_item(trans, log, dst_path,
path->nodes[0], path->slots[0],
&tmp);
+ if (ret) {
+ err = ret;
+ goto done;
+ }
}
}
btrfs_release_path(root, path);
@@ -2432,7 +2449,10 @@
goto done;
ret = overwrite_item(trans, log, dst_path, src, i,
&min_key);
- BUG_ON(ret);
+ if (ret) {
+ err = ret;
+ goto done;
+ }
}
path->slots[0] = nritems;
@@ -2454,22 +2474,30 @@
ret = overwrite_item(trans, log, dst_path,
path->nodes[0], path->slots[0],
&tmp);
-
- BUG_ON(ret);
- last_offset = tmp.offset;
+ if (ret)
+ err = ret;
+ else
+ last_offset = tmp.offset;
goto done;
}
}
done:
- *last_offset_ret = last_offset;
btrfs_release_path(root, path);
btrfs_release_path(log, dst_path);
- /* insert the log range keys to indicate where the log is valid */
- ret = insert_dir_log_key(trans, log, path, key_type, inode->i_ino,
- first_offset, last_offset);
- BUG_ON(ret);
- return 0;
+ if (err == 0) {
+ *last_offset_ret = last_offset;
+ /*
+ * insert the log range keys to indicate where the log
+ * is valid
+ */
+ ret = insert_dir_log_key(trans, log, path, key_type,
+ inode->i_ino, first_offset,
+ last_offset);
+ if (ret)
+ err = ret;
+ }
+ return err;
}
/*
@@ -2501,7 +2529,8 @@
ret = log_dir_items(trans, root, inode, path,
dst_path, key_type, min_key,
&max_key);
- BUG_ON(ret);
+ if (ret)
+ return ret;
if (max_key == (u64)-1)
break;
min_key = max_key + 1;
@@ -2535,8 +2564,8 @@
while (1) {
ret = btrfs_search_slot(trans, log, &key, path, -1, 1);
-
- if (ret != 1)
+ BUG_ON(ret == 0);
+ if (ret < 0)
break;
if (path->slots[0] == 0)
@@ -2554,7 +2583,7 @@
btrfs_release_path(log, path);
}
btrfs_release_path(log, path);
- return 0;
+ return ret;
}
static noinline int copy_items(struct btrfs_trans_handle *trans,
@@ -2587,7 +2616,10 @@
}
ret = btrfs_insert_empty_items(trans, log, dst_path,
ins_keys, ins_sizes, nr);
- BUG_ON(ret);
+ if (ret) {
+ kfree(ins_data);
+ return ret;
+ }
for (i = 0; i < nr; i++, dst_path->slots[0]++) {
dst_offset = btrfs_item_ptr_offset(dst_path->nodes[0],
@@ -2660,16 +2692,17 @@
* we have to do this after the loop above to avoid changing the
* log tree while trying to change the log tree.
*/
+ ret = 0;
while (!list_empty(&ordered_sums)) {
struct btrfs_ordered_sum *sums = list_entry(ordered_sums.next,
struct btrfs_ordered_sum,
list);
- ret = btrfs_csum_file_blocks(trans, log, sums);
- BUG_ON(ret);
+ if (!ret)
+ ret = btrfs_csum_file_blocks(trans, log, sums);
list_del(&sums->list);
kfree(sums);
}
- return 0;
+ return ret;
}
/* log a single inode in the tree log.
@@ -2697,6 +2730,7 @@
struct btrfs_root *log = root->log_root;
struct extent_buffer *src = NULL;
u32 size;
+ int err = 0;
int ret;
int nritems;
int ins_start_slot = 0;
@@ -2739,7 +2773,10 @@
} else {
ret = btrfs_truncate_inode_items(trans, log, inode, 0, 0);
}
- BUG_ON(ret);
+ if (ret) {
+ err = ret;
+ goto out_unlock;
+ }
path->keep_locks = 1;
while (1) {
@@ -2768,7 +2805,10 @@
ret = copy_items(trans, log, dst_path, src, ins_start_slot,
ins_nr, inode_only);
- BUG_ON(ret);
+ if (ret) {
+ err = ret;
+ goto out_unlock;
+ }
ins_nr = 1;
ins_start_slot = path->slots[0];
next_slot:
@@ -2784,7 +2824,10 @@
ret = copy_items(trans, log, dst_path, src,
ins_start_slot,
ins_nr, inode_only);
- BUG_ON(ret);
+ if (ret) {
+ err = ret;
+ goto out_unlock;
+ }
ins_nr = 0;
}
btrfs_release_path(root, path);
@@ -2802,7 +2845,10 @@
ret = copy_items(trans, log, dst_path, src,
ins_start_slot,
ins_nr, inode_only);
- BUG_ON(ret);
+ if (ret) {
+ err = ret;
+ goto out_unlock;
+ }
ins_nr = 0;
}
WARN_ON(ins_nr);
@@ -2810,14 +2856,18 @@
btrfs_release_path(root, path);
btrfs_release_path(log, dst_path);
ret = log_directory_changes(trans, root, inode, path, dst_path);
- BUG_ON(ret);
+ if (ret) {
+ err = ret;
+ goto out_unlock;
+ }
}
BTRFS_I(inode)->logged_trans = trans->transid;
+out_unlock:
mutex_unlock(&BTRFS_I(inode)->log_mutex);
btrfs_free_path(path);
btrfs_free_path(dst_path);
- return 0;
+ return err;
}
/*
@@ -2942,10 +2992,13 @@
goto end_no_trans;
}
- start_log_trans(trans, root);
+ ret = start_log_trans(trans, root);
+ if (ret)
+ goto end_trans;
ret = btrfs_log_inode(trans, root, inode, inode_only);
- BUG_ON(ret);
+ if (ret)
+ goto end_trans;
/*
* for regular files, if its inode is already on disk, we don't
@@ -2955,8 +3008,10 @@
*/
if (S_ISREG(inode->i_mode) &&
BTRFS_I(inode)->generation <= last_committed &&
- BTRFS_I(inode)->last_unlink_trans <= last_committed)
- goto no_parent;
+ BTRFS_I(inode)->last_unlink_trans <= last_committed) {
+ ret = 0;
+ goto end_trans;
+ }
inode_only = LOG_INODE_EXISTS;
while (1) {
@@ -2970,15 +3025,21 @@
if (BTRFS_I(inode)->generation >
root->fs_info->last_trans_committed) {
ret = btrfs_log_inode(trans, root, inode, inode_only);
- BUG_ON(ret);
+ if (ret)
+ goto end_trans;
}
if (IS_ROOT(parent))
break;
parent = parent->d_parent;
}
-no_parent:
ret = 0;
+end_trans:
+ if (ret < 0) {
+ BUG_ON(ret != -ENOSPC);
+ root->fs_info->last_trans_log_full_commit = trans->transid;
+ ret = 1;
+ }
btrfs_end_log_trans(root);
end_no_trans:
return ret;
@@ -3020,7 +3081,7 @@
path = btrfs_alloc_path();
BUG_ON(!path);
- trans = btrfs_start_transaction(fs_info->tree_root, 1);
+ trans = btrfs_start_transaction(fs_info->tree_root, 0);
wc.trans = trans;
wc.pin = 1;
diff --git a/fs/btrfs/tree-log.h b/fs/btrfs/tree-log.h
index 0776eac..3dfae84 100644
--- a/fs/btrfs/tree-log.h
+++ b/fs/btrfs/tree-log.h
@@ -25,6 +25,8 @@
int btrfs_sync_log(struct btrfs_trans_handle *trans,
struct btrfs_root *root);
int btrfs_free_log(struct btrfs_trans_handle *trans, struct btrfs_root *root);
+int btrfs_free_log_root_tree(struct btrfs_trans_handle *trans,
+ struct btrfs_fs_info *fs_info);
int btrfs_recover_log_trees(struct btrfs_root *tree_root);
int btrfs_log_dentry_safe(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct dentry *dentry);
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 8db7b14..d6e3af8 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -1097,7 +1097,7 @@
if (!path)
return -ENOMEM;
- trans = btrfs_start_transaction(root, 1);
+ trans = btrfs_start_transaction(root, 0);
key.objectid = BTRFS_DEV_ITEMS_OBJECTID;
key.type = BTRFS_DEV_ITEM_KEY;
key.offset = device->devid;
@@ -1486,7 +1486,7 @@
goto error;
}
- trans = btrfs_start_transaction(root, 1);
+ trans = btrfs_start_transaction(root, 0);
lock_chunks(root);
device->barriers = 1;
@@ -1751,9 +1751,10 @@
/* step one, relocate all the extents inside this chunk */
ret = btrfs_relocate_block_group(extent_root, chunk_offset);
- BUG_ON(ret);
+ if (ret)
+ return ret;
- trans = btrfs_start_transaction(root, 1);
+ trans = btrfs_start_transaction(root, 0);
BUG_ON(!trans);
lock_chunks(root);
@@ -1925,7 +1926,7 @@
break;
BUG_ON(ret);
- trans = btrfs_start_transaction(dev_root, 1);
+ trans = btrfs_start_transaction(dev_root, 0);
BUG_ON(!trans);
ret = btrfs_grow_device(trans, device, old_size);
@@ -2094,11 +2095,7 @@
}
/* Shrinking succeeded, else we would be at "done". */
- trans = btrfs_start_transaction(root, 1);
- if (!trans) {
- ret = -ENOMEM;
- goto done;
- }
+ trans = btrfs_start_transaction(root, 0);
lock_chunks(root);
device->disk_total_bytes = new_size;
diff --git a/fs/btrfs/xattr.c b/fs/btrfs/xattr.c
index 59acd3e..88ecbb2 100644
--- a/fs/btrfs/xattr.c
+++ b/fs/btrfs/xattr.c
@@ -154,15 +154,10 @@
if (trans)
return do_setxattr(trans, inode, name, value, size, flags);
- ret = btrfs_reserve_metadata_space(root, 2);
- if (ret)
- return ret;
+ trans = btrfs_start_transaction(root, 2);
+ if (IS_ERR(trans))
+ return PTR_ERR(trans);
- trans = btrfs_start_transaction(root, 1);
- if (!trans) {
- ret = -ENOMEM;
- goto out;
- }
btrfs_set_trans_block_group(trans, inode);
ret = do_setxattr(trans, inode, name, value, size, flags);
@@ -174,7 +169,6 @@
BUG_ON(ret);
out:
btrfs_end_transaction_throttle(trans, root);
- btrfs_unreserve_metadata_space(root, 2);
return ret;
}
diff --git a/fs/buffer.c b/fs/buffer.c
index e8aa708..d54812b 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -1949,14 +1949,11 @@
}
/*
- * block_write_begin takes care of the basic task of block allocation and
- * bringing partial write blocks uptodate first.
- *
- * If *pagep is not NULL, then block_write_begin uses the locked page
- * at *pagep rather than allocating its own. In this case, the page will
- * not be unlocked or deallocated on failure.
+ * Filesystems implementing the new truncate sequence should use the
+ * _newtrunc postfix variant which won't incorrectly call vmtruncate.
+ * The filesystem needs to handle block truncation upon failure.
*/
-int block_write_begin(struct file *file, struct address_space *mapping,
+int block_write_begin_newtrunc(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata,
get_block_t *get_block)
@@ -1992,20 +1989,50 @@
unlock_page(page);
page_cache_release(page);
*pagep = NULL;
-
- /*
- * prepare_write() may have instantiated a few blocks
- * outside i_size. Trim these off again. Don't need
- * i_size_read because we hold i_mutex.
- */
- if (pos + len > inode->i_size)
- vmtruncate(inode, inode->i_size);
}
}
out:
return status;
}
+EXPORT_SYMBOL(block_write_begin_newtrunc);
+
+/*
+ * block_write_begin takes care of the basic task of block allocation and
+ * bringing partial write blocks uptodate first.
+ *
+ * If *pagep is not NULL, then block_write_begin uses the locked page
+ * at *pagep rather than allocating its own. In this case, the page will
+ * not be unlocked or deallocated on failure.
+ */
+int block_write_begin(struct file *file, struct address_space *mapping,
+ loff_t pos, unsigned len, unsigned flags,
+ struct page **pagep, void **fsdata,
+ get_block_t *get_block)
+{
+ int ret;
+
+ ret = block_write_begin_newtrunc(file, mapping, pos, len, flags,
+ pagep, fsdata, get_block);
+
+ /*
+ * prepare_write() may have instantiated a few blocks
+ * outside i_size. Trim these off again. Don't need
+ * i_size_read because we hold i_mutex.
+ *
+ * Filesystems which pass down their own page also cannot
+ * call into vmtruncate here because it would lead to lock
+ * inversion problems (*pagep is locked). This is a further
+ * example of where the old truncate sequence is inadequate.
+ */
+ if (unlikely(ret) && *pagep == NULL) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
+}
EXPORT_SYMBOL(block_write_begin);
int block_write_end(struct file *file, struct address_space *mapping,
@@ -2324,7 +2351,7 @@
* For moronic filesystems that do not allow holes in file.
* We may have to extend the file.
*/
-int cont_write_begin(struct file *file, struct address_space *mapping,
+int cont_write_begin_newtrunc(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata,
get_block_t *get_block, loff_t *bytes)
@@ -2345,11 +2372,30 @@
}
*pagep = NULL;
- err = block_write_begin(file, mapping, pos, len,
+ err = block_write_begin_newtrunc(file, mapping, pos, len,
flags, pagep, fsdata, get_block);
out:
return err;
}
+EXPORT_SYMBOL(cont_write_begin_newtrunc);
+
+int cont_write_begin(struct file *file, struct address_space *mapping,
+ loff_t pos, unsigned len, unsigned flags,
+ struct page **pagep, void **fsdata,
+ get_block_t *get_block, loff_t *bytes)
+{
+ int ret;
+
+ ret = cont_write_begin_newtrunc(file, mapping, pos, len, flags,
+ pagep, fsdata, get_block, bytes);
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
+
+ return ret;
+}
EXPORT_SYMBOL(cont_write_begin);
int block_prepare_write(struct page *page, unsigned from, unsigned to,
@@ -2381,7 +2427,7 @@
*
* We are not allowed to take the i_mutex here so we have to play games to
* protect against truncate races as the page could now be beyond EOF. Because
- * vmtruncate() writes the inode size before removing pages, once we have the
+ * truncate writes the inode size before removing pages, once we have the
* page lock we can determine safely if the page is beyond EOF. If it is not
* beyond EOF, then the page is guaranteed safe against truncation until we
* unlock the page.
@@ -2464,10 +2510,11 @@
}
/*
- * On entry, the page is fully not uptodate.
- * On exit the page is fully uptodate in the areas outside (from,to)
+ * Filesystems implementing the new truncate sequence should use the
+ * _newtrunc postfix variant which won't incorrectly call vmtruncate.
+ * The filesystem needs to handle block truncation upon failure.
*/
-int nobh_write_begin(struct file *file, struct address_space *mapping,
+int nobh_write_begin_newtrunc(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata,
get_block_t *get_block)
@@ -2500,8 +2547,8 @@
unlock_page(page);
page_cache_release(page);
*pagep = NULL;
- return block_write_begin(file, mapping, pos, len, flags, pagep,
- fsdata, get_block);
+ return block_write_begin_newtrunc(file, mapping, pos, len,
+ flags, pagep, fsdata, get_block);
}
if (PageMappedToDisk(page))
@@ -2605,8 +2652,34 @@
page_cache_release(page);
*pagep = NULL;
- if (pos + len > inode->i_size)
- vmtruncate(inode, inode->i_size);
+ return ret;
+}
+EXPORT_SYMBOL(nobh_write_begin_newtrunc);
+
+/*
+ * On entry, the page is fully not uptodate.
+ * On exit the page is fully uptodate in the areas outside (from,to)
+ */
+int nobh_write_begin(struct file *file, struct address_space *mapping,
+ loff_t pos, unsigned len, unsigned flags,
+ struct page **pagep, void **fsdata,
+ get_block_t *get_block)
+{
+ int ret;
+
+ ret = nobh_write_begin_newtrunc(file, mapping, pos, len, flags,
+ pagep, fsdata, get_block);
+
+ /*
+ * prepare_write() may have instantiated a few blocks
+ * outside i_size. Trim these off again. Don't need
+ * i_size_read because we hold i_mutex.
+ */
+ if (unlikely(ret)) {
+ loff_t isize = mapping->host->i_size;
+ if (pos + len > isize)
+ vmtruncate(mapping->host, isize);
+ }
return ret;
}
diff --git a/fs/ceph/auth.c b/fs/ceph/auth.c
index 9f46de2..89490be 100644
--- a/fs/ceph/auth.c
+++ b/fs/ceph/auth.c
@@ -1,7 +1,6 @@
#include "ceph_debug.h"
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/err.h>
#include <linux/slab.h>
@@ -217,8 +216,8 @@
if (ac->protocol != protocol) {
ret = ceph_auth_init_protocol(ac, protocol);
if (ret) {
- pr_err("error %d on auth method %s init\n",
- ret, ac->ops->name);
+ pr_err("error %d on auth protocol %d init\n",
+ ret, protocol);
goto out;
}
}
@@ -247,7 +246,7 @@
if (!ac->protocol)
return ceph_auth_build_hello(ac, msg_buf, msg_len);
BUG_ON(!ac->ops);
- if (!ac->ops->is_authenticated(ac))
+ if (ac->ops->should_authenticate(ac))
return ceph_build_auth_request(ac, msg_buf, msg_len);
return 0;
}
diff --git a/fs/ceph/auth.h b/fs/ceph/auth.h
index 4429a70..d38a2fb 100644
--- a/fs/ceph/auth.h
+++ b/fs/ceph/auth.h
@@ -24,6 +24,12 @@
int (*is_authenticated)(struct ceph_auth_client *ac);
/*
+ * true if we should (re)authenticate, e.g., when our tickets
+ * are getting old and crusty.
+ */
+ int (*should_authenticate)(struct ceph_auth_client *ac);
+
+ /*
* build requests and process replies during monitor
* handshake. if handle_reply returns -EAGAIN, we build
* another request.
diff --git a/fs/ceph/auth_none.c b/fs/ceph/auth_none.c
index 24407c1..ad1dc21 100644
--- a/fs/ceph/auth_none.c
+++ b/fs/ceph/auth_none.c
@@ -31,6 +31,13 @@
return !xi->starting;
}
+static int should_authenticate(struct ceph_auth_client *ac)
+{
+ struct ceph_auth_none_info *xi = ac->private;
+
+ return xi->starting;
+}
+
/*
* the generic auth code decode the global_id, and we carry no actual
* authenticate state, so nothing happens here.
@@ -98,6 +105,7 @@
.reset = reset,
.destroy = destroy,
.is_authenticated = is_authenticated,
+ .should_authenticate = should_authenticate,
.handle_reply = handle_reply,
.create_authorizer = ceph_auth_none_create_authorizer,
.destroy_authorizer = ceph_auth_none_destroy_authorizer,
diff --git a/fs/ceph/auth_x.c b/fs/ceph/auth_x.c
index 7b20623..6d44053 100644
--- a/fs/ceph/auth_x.c
+++ b/fs/ceph/auth_x.c
@@ -27,6 +27,17 @@
return (ac->want_keys & xi->have_keys) == ac->want_keys;
}
+static int ceph_x_should_authenticate(struct ceph_auth_client *ac)
+{
+ struct ceph_x_info *xi = ac->private;
+ int need;
+
+ ceph_x_validate_tickets(ac, &need);
+ dout("ceph_x_should_authenticate want=%d need=%d have=%d\n",
+ ac->want_keys, need, xi->have_keys);
+ return need != 0;
+}
+
static int ceph_x_encrypt_buflen(int ilen)
{
return sizeof(struct ceph_x_encrypt_header) + ilen + 16 +
@@ -482,7 +493,7 @@
return -EAGAIN;
}
- op = le32_to_cpu(head->op);
+ op = le16_to_cpu(head->op);
result = le32_to_cpu(head->result);
dout("handle_reply op %d result %d\n", op, result);
switch (op) {
@@ -602,6 +613,9 @@
remove_ticket_handler(ac, th);
}
+ if (xi->auth_authorizer.buf)
+ ceph_buffer_put(xi->auth_authorizer.buf);
+
kfree(ac->private);
ac->private = NULL;
}
@@ -620,6 +634,7 @@
static const struct ceph_auth_client_ops ceph_x_ops = {
.name = "x",
.is_authenticated = ceph_x_is_authenticated,
+ .should_authenticate = ceph_x_should_authenticate,
.build_request = ceph_x_build_request,
.handle_reply = ceph_x_handle_reply,
.create_authorizer = ceph_x_create_authorizer,
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 0dd0b81..74144d6 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -244,8 +244,14 @@
struct ceph_cap *cap = NULL;
/* temporary, until we do something about cap import/export */
- if (!ctx)
- return kmem_cache_alloc(ceph_cap_cachep, GFP_NOFS);
+ if (!ctx) {
+ cap = kmem_cache_alloc(ceph_cap_cachep, GFP_NOFS);
+ if (cap) {
+ caps_use_count++;
+ caps_total_count++;
+ }
+ return cap;
+ }
spin_lock(&caps_list_lock);
dout("get_cap ctx=%p (%d) %d = %d used + %d resv + %d avail\n",
@@ -981,6 +987,46 @@
return 0;
}
+static void __queue_cap_release(struct ceph_mds_session *session,
+ u64 ino, u64 cap_id, u32 migrate_seq,
+ u32 issue_seq)
+{
+ struct ceph_msg *msg;
+ struct ceph_mds_cap_release *head;
+ struct ceph_mds_cap_item *item;
+
+ spin_lock(&session->s_cap_lock);
+ BUG_ON(!session->s_num_cap_releases);
+ msg = list_first_entry(&session->s_cap_releases,
+ struct ceph_msg, list_head);
+
+ dout(" adding %llx release to mds%d msg %p (%d left)\n",
+ ino, session->s_mds, msg, session->s_num_cap_releases);
+
+ BUG_ON(msg->front.iov_len + sizeof(*item) > PAGE_CACHE_SIZE);
+ head = msg->front.iov_base;
+ head->num = cpu_to_le32(le32_to_cpu(head->num) + 1);
+ item = msg->front.iov_base + msg->front.iov_len;
+ item->ino = cpu_to_le64(ino);
+ item->cap_id = cpu_to_le64(cap_id);
+ item->migrate_seq = cpu_to_le32(migrate_seq);
+ item->seq = cpu_to_le32(issue_seq);
+
+ session->s_num_cap_releases--;
+
+ msg->front.iov_len += sizeof(*item);
+ if (le32_to_cpu(head->num) == CEPH_CAPS_PER_RELEASE) {
+ dout(" release msg %p full\n", msg);
+ list_move_tail(&msg->list_head, &session->s_cap_releases_done);
+ } else {
+ dout(" release msg %p at %d/%d (%d)\n", msg,
+ (int)le32_to_cpu(head->num),
+ (int)CEPH_CAPS_PER_RELEASE,
+ (int)msg->front.iov_len);
+ }
+ spin_unlock(&session->s_cap_lock);
+}
+
/*
* Queue cap releases when an inode is dropped from our cache. Since
* inode is about to be destroyed, there is no need for i_lock.
@@ -994,41 +1040,9 @@
while (p) {
struct ceph_cap *cap = rb_entry(p, struct ceph_cap, ci_node);
struct ceph_mds_session *session = cap->session;
- struct ceph_msg *msg;
- struct ceph_mds_cap_release *head;
- struct ceph_mds_cap_item *item;
- spin_lock(&session->s_cap_lock);
- BUG_ON(!session->s_num_cap_releases);
- msg = list_first_entry(&session->s_cap_releases,
- struct ceph_msg, list_head);
-
- dout(" adding %p release to mds%d msg %p (%d left)\n",
- inode, session->s_mds, msg, session->s_num_cap_releases);
-
- BUG_ON(msg->front.iov_len + sizeof(*item) > PAGE_CACHE_SIZE);
- head = msg->front.iov_base;
- head->num = cpu_to_le32(le32_to_cpu(head->num) + 1);
- item = msg->front.iov_base + msg->front.iov_len;
- item->ino = cpu_to_le64(ceph_ino(inode));
- item->cap_id = cpu_to_le64(cap->cap_id);
- item->migrate_seq = cpu_to_le32(cap->mseq);
- item->seq = cpu_to_le32(cap->issue_seq);
-
- session->s_num_cap_releases--;
-
- msg->front.iov_len += sizeof(*item);
- if (le32_to_cpu(head->num) == CEPH_CAPS_PER_RELEASE) {
- dout(" release msg %p full\n", msg);
- list_move_tail(&msg->list_head,
- &session->s_cap_releases_done);
- } else {
- dout(" release msg %p at %d/%d (%d)\n", msg,
- (int)le32_to_cpu(head->num),
- (int)CEPH_CAPS_PER_RELEASE,
- (int)msg->front.iov_len);
- }
- spin_unlock(&session->s_cap_lock);
+ __queue_cap_release(session, ceph_ino(inode), cap->cap_id,
+ cap->mseq, cap->issue_seq);
p = rb_next(p);
__ceph_remove_cap(cap);
}
@@ -1776,9 +1790,9 @@
spin_unlock(&ci->i_unsafe_lock);
}
-int ceph_fsync(struct file *file, struct dentry *dentry, int datasync)
+int ceph_fsync(struct file *file, int datasync)
{
- struct inode *inode = dentry->d_inode;
+ struct inode *inode = file->f_mapping->host;
struct ceph_inode_info *ci = ceph_inode(inode);
unsigned flush_tid;
int ret;
@@ -2655,7 +2669,7 @@
struct ceph_mds_caps *h;
int mds = session->s_mds;
int op;
- u32 seq;
+ u32 seq, mseq;
struct ceph_vino vino;
u64 cap_id;
u64 size, max_size;
@@ -2675,6 +2689,7 @@
vino.snap = CEPH_NOSNAP;
cap_id = le64_to_cpu(h->cap_id);
seq = le32_to_cpu(h->seq);
+ mseq = le32_to_cpu(h->migrate_seq);
size = le64_to_cpu(h->size);
max_size = le64_to_cpu(h->max_size);
@@ -2689,6 +2704,18 @@
vino.snap, inode);
if (!inode) {
dout(" i don't have ino %llx\n", vino.ino);
+
+ if (op == CEPH_CAP_OP_IMPORT)
+ __queue_cap_release(session, vino.ino, cap_id,
+ mseq, seq);
+
+ /*
+ * send any full release message to try to move things
+ * along for the mds (who clearly thinks we still have this
+ * cap).
+ */
+ ceph_add_cap_releases(mdsc, session, -1);
+ ceph_send_cap_releases(mdsc, session);
goto done;
}
@@ -2714,7 +2741,7 @@
spin_lock(&inode->i_lock);
cap = __get_cap_for_mds(ceph_inode(inode), mds);
if (!cap) {
- dout("no cap on %p ino %llx.%llx from mds%d, releasing\n",
+ dout(" no cap on %p ino %llx.%llx from mds%d\n",
inode, ceph_ino(inode), ceph_snap(inode), mds);
spin_unlock(&inode->i_lock);
goto done;
@@ -2865,18 +2892,19 @@
struct ceph_inode_info *ci = ceph_inode(inode);
struct ceph_cap *cap;
struct ceph_mds_request_release *rel = *p;
+ int used, dirty;
int ret = 0;
- int used = 0;
spin_lock(&inode->i_lock);
used = __ceph_caps_used(ci);
+ dirty = __ceph_caps_dirty(ci);
- dout("encode_inode_release %p mds%d used %s drop %s unless %s\n", inode,
- mds, ceph_cap_string(used), ceph_cap_string(drop),
+ dout("encode_inode_release %p mds%d used|dirty %s drop %s unless %s\n",
+ inode, mds, ceph_cap_string(used|dirty), ceph_cap_string(drop),
ceph_cap_string(unless));
- /* only drop unused caps */
- drop &= ~used;
+ /* only drop unused, clean caps */
+ drop &= ~(used | dirty);
cap = __get_cap_for_mds(ci, mds);
if (cap && __cap_is_valid(cap)) {
diff --git a/fs/ceph/ceph_fs.h b/fs/ceph/ceph_fs.h
index 3b9eeed..2fa992e 100644
--- a/fs/ceph/ceph_fs.h
+++ b/fs/ceph/ceph_fs.h
@@ -265,16 +265,17 @@
* - they also define the lock ordering by the MDS
* - a few of these are internal to the mds
*/
-#define CEPH_LOCK_DN 1
-#define CEPH_LOCK_ISNAP 2
-#define CEPH_LOCK_IVERSION 4 /* mds internal */
-#define CEPH_LOCK_IFILE 8 /* mds internal */
-#define CEPH_LOCK_IAUTH 32
-#define CEPH_LOCK_ILINK 64
-#define CEPH_LOCK_IDFT 128 /* dir frag tree */
-#define CEPH_LOCK_INEST 256 /* mds internal */
-#define CEPH_LOCK_IXATTR 512
-#define CEPH_LOCK_INO 2048 /* immutable inode bits; not a lock */
+#define CEPH_LOCK_DVERSION 1
+#define CEPH_LOCK_DN 2
+#define CEPH_LOCK_ISNAP 16
+#define CEPH_LOCK_IVERSION 32 /* mds internal */
+#define CEPH_LOCK_IFILE 64
+#define CEPH_LOCK_IAUTH 128
+#define CEPH_LOCK_ILINK 256
+#define CEPH_LOCK_IDFT 512 /* dir frag tree */
+#define CEPH_LOCK_INEST 1024 /* mds internal */
+#define CEPH_LOCK_IXATTR 2048
+#define CEPH_LOCK_INO 8192 /* immutable inode bits; not a lock */
/* client_session ops */
enum {
diff --git a/fs/ceph/crush/mapper.c b/fs/ceph/crush/mapper.c
index 9ba54ef..a4eec13 100644
--- a/fs/ceph/crush/mapper.c
+++ b/fs/ceph/crush/mapper.c
@@ -238,7 +238,7 @@
static int crush_bucket_choose(struct crush_bucket *in, int x, int r)
{
- dprintk("choose %d x=%d r=%d\n", in->id, x, r);
+ dprintk(" crush_bucket_choose %d x=%d r=%d\n", in->id, x, r);
switch (in->alg) {
case CRUSH_BUCKET_UNIFORM:
return bucket_uniform_choose((struct crush_bucket_uniform *)in,
@@ -264,7 +264,7 @@
*/
static int is_out(struct crush_map *map, __u32 *weight, int item, int x)
{
- if (weight[item] >= 0x1000)
+ if (weight[item] >= 0x10000)
return 0;
if (weight[item] == 0)
return 1;
@@ -305,7 +305,9 @@
int itemtype;
int collide, reject;
const int orig_tries = 5; /* attempts before we fall back to search */
- dprintk("choose bucket %d x %d outpos %d\n", bucket->id, x, outpos);
+
+ dprintk("CHOOSE%s bucket %d x %d outpos %d numrep %d\n", recurse_to_leaf ? "_LEAF" : "",
+ bucket->id, x, outpos, numrep);
for (rep = outpos; rep < numrep; rep++) {
/* keep trying until we get a non-out, non-colliding item */
@@ -366,6 +368,7 @@
BUG_ON(item >= 0 ||
(-1-item) >= map->max_buckets);
in = map->buckets[-1-item];
+ retry_bucket = 1;
continue;
}
@@ -377,15 +380,25 @@
}
}
- if (recurse_to_leaf &&
- item < 0 &&
- crush_choose(map, map->buckets[-1-item],
- weight,
- x, outpos+1, 0,
- out2, outpos,
- firstn, 0, NULL) <= outpos) {
- reject = 1;
- } else {
+ reject = 0;
+ if (recurse_to_leaf) {
+ if (item < 0) {
+ if (crush_choose(map,
+ map->buckets[-1-item],
+ weight,
+ x, outpos+1, 0,
+ out2, outpos,
+ firstn, 0,
+ NULL) <= outpos)
+ /* didn't get leaf */
+ reject = 1;
+ } else {
+ /* we already have a leaf! */
+ out2[outpos] = item;
+ }
+ }
+
+ if (!reject) {
/* out? */
if (itemtype == 0)
reject = is_out(map, weight,
@@ -424,12 +437,12 @@
continue;
}
- dprintk("choose got %d\n", item);
+ dprintk("CHOOSE got %d\n", item);
out[outpos] = item;
outpos++;
}
- dprintk("choose returns %d\n", outpos);
+ dprintk("CHOOSE returns %d\n", outpos);
return outpos;
}
diff --git a/fs/ceph/debugfs.c b/fs/ceph/debugfs.c
index 3be33fb..f2f5332 100644
--- a/fs/ceph/debugfs.c
+++ b/fs/ceph/debugfs.c
@@ -261,7 +261,7 @@
static int caps_show(struct seq_file *s, void *p)
{
- struct ceph_client *client = p;
+ struct ceph_client *client = s->private;
int total, avail, used, reserved, min;
ceph_reservation_status(client, &total, &avail, &used, &reserved, &min);
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index 4fd3090..f857193 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -587,7 +587,7 @@
CEPH_MDS_OP_LOOKUPSNAP : CEPH_MDS_OP_LOOKUP;
req = ceph_mdsc_create_request(mdsc, op, USE_ANY_MDS);
if (IS_ERR(req))
- return ERR_PTR(PTR_ERR(req));
+ return ERR_CAST(req);
req->r_dentry = dget(dentry);
req->r_num_caps = 2;
/* we only need inode linkage */
@@ -1107,10 +1107,9 @@
* an fsync() on a dir will wait for any uncommitted directory
* operations to commit.
*/
-static int ceph_dir_fsync(struct file *file, struct dentry *dentry,
- int datasync)
+static int ceph_dir_fsync(struct file *file, int datasync)
{
- struct inode *inode = dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct ceph_inode_info *ci = ceph_inode(inode);
struct list_head *head = &ci->i_unsafe_dirops;
struct ceph_mds_request *req;
diff --git a/fs/ceph/export.c b/fs/ceph/export.c
index 1744764..4480cb1 100644
--- a/fs/ceph/export.c
+++ b/fs/ceph/export.c
@@ -133,7 +133,7 @@
req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_LOOKUPHASH,
USE_ANY_MDS);
if (IS_ERR(req))
- return ERR_PTR(PTR_ERR(req));
+ return ERR_CAST(req);
req->r_ino1 = vino;
req->r_ino2.ino = cfh->parent_ino;
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 6512b67..6251a15 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -230,7 +230,7 @@
/* do the open */
req = prepare_open_request(dir->i_sb, flags, mode);
if (IS_ERR(req))
- return ERR_PTR(PTR_ERR(req));
+ return ERR_CAST(req);
req->r_dentry = dget(dentry);
req->r_num_caps = 2;
if (flags & O_CREAT) {
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index a81b8b6..8f9b9fe 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -69,7 +69,7 @@
BUG_ON(!S_ISDIR(parent->i_mode));
if (IS_ERR(inode))
- return ERR_PTR(PTR_ERR(inode));
+ return inode;
inode->i_mode = parent->i_mode;
inode->i_uid = parent->i_uid;
inode->i_gid = parent->i_gid;
@@ -827,7 +827,7 @@
spin_lock(&dcache_lock);
spin_lock(&dn->d_lock);
- list_move_tail(&dir->d_subdirs, &dn->d_u.d_child);
+ list_move(&dn->d_u.d_child, &dir->d_subdirs);
dout("set_dentry_offset %p %lld (%p %p)\n", dn, di->offset,
dn->d_u.d_child.prev, dn->d_u.d_child.next);
spin_unlock(&dn->d_lock);
@@ -854,8 +854,8 @@
d_drop(dn);
realdn = d_materialise_unique(dn, in);
if (IS_ERR(realdn)) {
- pr_err("splice_dentry error %p inode %p ino %llx.%llx\n",
- dn, in, ceph_vinop(in));
+ pr_err("splice_dentry error %ld %p inode %p ino %llx.%llx\n",
+ PTR_ERR(realdn), dn, in, ceph_vinop(in));
if (prehash)
*prehash = false; /* don't rehash on error */
dn = realdn; /* note realdn contains the error */
@@ -1234,18 +1234,23 @@
goto out;
}
dn = splice_dentry(dn, in, NULL);
+ if (IS_ERR(dn))
+ dn = NULL;
}
if (fill_inode(in, &rinfo->dir_in[i], NULL, session,
req->r_request_started, -1,
&req->r_caps_reservation) < 0) {
pr_err("fill_inode badness on %p\n", in);
- dput(dn);
- continue;
+ goto next_item;
}
- update_dentry_lease(dn, rinfo->dir_dlease[i],
- req->r_session, req->r_request_started);
- dput(dn);
+ if (dn)
+ update_dentry_lease(dn, rinfo->dir_dlease[i],
+ req->r_session,
+ req->r_request_started);
+next_item:
+ if (dn)
+ dput(dn);
}
req->r_did_prepopulate = true;
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 885aa57..416c08d 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -1066,9 +1066,9 @@
*
* Called under s_mutex.
*/
-static int add_cap_releases(struct ceph_mds_client *mdsc,
- struct ceph_mds_session *session,
- int extra)
+int ceph_add_cap_releases(struct ceph_mds_client *mdsc,
+ struct ceph_mds_session *session,
+ int extra)
{
struct ceph_msg *msg;
struct ceph_mds_cap_release *head;
@@ -1176,8 +1176,8 @@
/*
* called under s_mutex
*/
-static void send_cap_releases(struct ceph_mds_client *mdsc,
- struct ceph_mds_session *session)
+void ceph_send_cap_releases(struct ceph_mds_client *mdsc,
+ struct ceph_mds_session *session)
{
struct ceph_msg *msg;
@@ -1514,6 +1514,9 @@
ceph_encode_filepath(&p, end, ino1, path1);
ceph_encode_filepath(&p, end, ino2, path2);
+ /* make note of release offset, in case we need to replay */
+ req->r_request_release_offset = p - msg->front.iov_base;
+
/* cap releases */
releases = 0;
if (req->r_inode_drop)
@@ -1580,6 +1583,32 @@
dout("prepare_send_request %p tid %lld %s (attempt %d)\n", req,
req->r_tid, ceph_mds_op_name(req->r_op), req->r_attempts);
+ if (req->r_got_unsafe) {
+ /*
+ * Replay. Do not regenerate message (and rebuild
+ * paths, etc.); just use the original message.
+ * Rebuilding paths will break for renames because
+ * d_move mangles the src name.
+ */
+ msg = req->r_request;
+ rhead = msg->front.iov_base;
+
+ flags = le32_to_cpu(rhead->flags);
+ flags |= CEPH_MDS_FLAG_REPLAY;
+ rhead->flags = cpu_to_le32(flags);
+
+ if (req->r_target_inode)
+ rhead->ino = cpu_to_le64(ceph_ino(req->r_target_inode));
+
+ rhead->num_retry = req->r_attempts - 1;
+
+ /* remove cap/dentry releases from message */
+ rhead->num_releases = 0;
+ msg->hdr.front_len = cpu_to_le32(req->r_request_release_offset);
+ msg->front.iov_len = req->r_request_release_offset;
+ return 0;
+ }
+
if (req->r_request) {
ceph_msg_put(req->r_request);
req->r_request = NULL;
@@ -1601,13 +1630,9 @@
rhead->flags = cpu_to_le32(flags);
rhead->num_fwd = req->r_num_fwd;
rhead->num_retry = req->r_attempts - 1;
+ rhead->ino = 0;
dout(" r_locked_dir = %p\n", req->r_locked_dir);
-
- if (req->r_target_inode && req->r_got_unsafe)
- rhead->ino = cpu_to_le64(ceph_ino(req->r_target_inode));
- else
- rhead->ino = 0;
return 0;
}
@@ -1768,12 +1793,12 @@
mutex_unlock(&mdsc->mutex);
dout("do_request waiting\n");
if (req->r_timeout) {
- err = (long)wait_for_completion_interruptible_timeout(
+ err = (long)wait_for_completion_killable_timeout(
&req->r_completion, req->r_timeout);
if (err == 0)
err = -EIO;
} else {
- err = wait_for_completion_interruptible(&req->r_completion);
+ err = wait_for_completion_killable(&req->r_completion);
}
dout("do_request waited, got %d\n", err);
mutex_lock(&mdsc->mutex);
@@ -1980,7 +2005,7 @@
}
mutex_unlock(&mdsc->mutex);
- add_cap_releases(mdsc, req->r_session, -1);
+ ceph_add_cap_releases(mdsc, req->r_session, -1);
mutex_unlock(&session->s_mutex);
/* kick calling process */
@@ -2014,16 +2039,21 @@
mutex_lock(&mdsc->mutex);
req = __lookup_request(mdsc, tid);
if (!req) {
- dout("forward %llu to mds%d - req dne\n", tid, next_mds);
+ dout("forward tid %llu to mds%d - req dne\n", tid, next_mds);
goto out; /* dup reply? */
}
- if (fwd_seq <= req->r_num_fwd) {
- dout("forward %llu to mds%d - old seq %d <= %d\n",
+ if (req->r_aborted) {
+ dout("forward tid %llu aborted, unregistering\n", tid);
+ __unregister_request(mdsc, req);
+ } else if (fwd_seq <= req->r_num_fwd) {
+ dout("forward tid %llu to mds%d - old seq %d <= %d\n",
tid, next_mds, req->r_num_fwd, fwd_seq);
} else {
/* resend. forward race not possible; mds would drop */
- dout("forward %llu to mds%d (we resend)\n", tid, next_mds);
+ dout("forward tid %llu to mds%d (we resend)\n", tid, next_mds);
+ BUG_ON(req->r_err);
+ BUG_ON(req->r_got_result);
req->r_num_fwd = fwd_seq;
req->r_resend_mds = next_mds;
put_request_session(req);
@@ -2428,6 +2458,7 @@
struct ceph_dentry_info *di;
int mds = session->s_mds;
struct ceph_mds_lease *h = msg->front.iov_base;
+ u32 seq;
struct ceph_vino vino;
int mask;
struct qstr dname;
@@ -2441,6 +2472,7 @@
vino.ino = le64_to_cpu(h->ino);
vino.snap = CEPH_NOSNAP;
mask = le16_to_cpu(h->mask);
+ seq = le32_to_cpu(h->seq);
dname.name = (void *)h + sizeof(*h) + sizeof(u32);
dname.len = msg->front.iov_len - sizeof(*h) - sizeof(u32);
if (dname.len != get_unaligned_le32(h+1))
@@ -2451,8 +2483,9 @@
/* lookup inode */
inode = ceph_find_inode(sb, vino);
- dout("handle_lease '%s', mask %d, ino %llx %p\n",
- ceph_lease_op_name(h->action), mask, vino.ino, inode);
+ dout("handle_lease %s, mask %d, ino %llx %p %.*s\n",
+ ceph_lease_op_name(h->action), mask, vino.ino, inode,
+ dname.len, dname.name);
if (inode == NULL) {
dout("handle_lease no inode %llx\n", vino.ino);
goto release;
@@ -2477,7 +2510,8 @@
switch (h->action) {
case CEPH_MDS_LEASE_REVOKE:
if (di && di->lease_session == session) {
- h->seq = cpu_to_le32(di->lease_seq);
+ if (ceph_seq_cmp(di->lease_seq, seq) > 0)
+ h->seq = cpu_to_le32(di->lease_seq);
__ceph_mdsc_drop_dentry_lease(dentry);
}
release = 1;
@@ -2491,7 +2525,7 @@
unsigned long duration =
le32_to_cpu(h->duration_ms) * HZ / 1000;
- di->lease_seq = le32_to_cpu(h->seq);
+ di->lease_seq = seq;
dentry->d_time = di->lease_renew_from + duration;
di->lease_renew_after = di->lease_renew_from +
(duration >> 1);
@@ -2541,7 +2575,7 @@
return;
lease = msg->front.iov_base;
lease->action = action;
- lease->mask = cpu_to_le16(CEPH_LOCK_DN);
+ lease->mask = cpu_to_le16(1);
lease->ino = cpu_to_le64(ceph_vino(inode).ino);
lease->first = lease->last = cpu_to_le64(ceph_vino(inode).snap);
lease->seq = cpu_to_le32(seq);
@@ -2571,7 +2605,7 @@
BUG_ON(inode == NULL);
BUG_ON(dentry == NULL);
- BUG_ON(mask != CEPH_LOCK_DN);
+ BUG_ON(mask == 0);
/* is dentry lease valid? */
spin_lock(&dentry->d_lock);
@@ -2681,10 +2715,10 @@
send_renew_caps(mdsc, s);
else
ceph_con_keepalive(&s->s_con);
- add_cap_releases(mdsc, s, -1);
+ ceph_add_cap_releases(mdsc, s, -1);
if (s->s_state == CEPH_MDS_SESSION_OPEN ||
s->s_state == CEPH_MDS_SESSION_HUNG)
- send_cap_releases(mdsc, s);
+ ceph_send_cap_releases(mdsc, s);
mutex_unlock(&s->s_mutex);
ceph_put_mds_session(s);
@@ -2774,6 +2808,12 @@
drop_leases(mdsc);
ceph_flush_dirty_caps(mdsc);
wait_requests(mdsc);
+
+ /*
+ * wait for reply handlers to drop their request refs and
+ * their inode/dcache refs
+ */
+ ceph_msgr_flush();
}
/*
diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h
index d9936c4..952410c 100644
--- a/fs/ceph/mds_client.h
+++ b/fs/ceph/mds_client.h
@@ -188,6 +188,7 @@
int r_old_inode_drop, r_old_inode_unless;
struct ceph_msg *r_request; /* original request */
+ int r_request_release_offset;
struct ceph_msg *r_reply;
struct ceph_mds_reply_info_parsed r_reply_info;
int r_err;
@@ -322,6 +323,12 @@
kref_put(&req->r_kref, ceph_mdsc_release_request);
}
+extern int ceph_add_cap_releases(struct ceph_mds_client *mdsc,
+ struct ceph_mds_session *session,
+ int extra);
+extern void ceph_send_cap_releases(struct ceph_mds_client *mdsc,
+ struct ceph_mds_session *session);
+
extern void ceph_mdsc_pre_umount(struct ceph_mds_client *mdsc);
extern char *ceph_mdsc_build_path(struct dentry *dentry, int *plen, u64 *base,
diff --git a/fs/ceph/messenger.c b/fs/ceph/messenger.c
index 60b7483..15167b2 100644
--- a/fs/ceph/messenger.c
+++ b/fs/ceph/messenger.c
@@ -43,7 +43,8 @@
* nicely render a sockaddr as a string.
*/
#define MAX_ADDR_STR 20
-static char addr_str[MAX_ADDR_STR][40];
+#define MAX_ADDR_STR_LEN 60
+static char addr_str[MAX_ADDR_STR][MAX_ADDR_STR_LEN];
static DEFINE_SPINLOCK(addr_str_lock);
static int last_addr_str;
@@ -52,7 +53,6 @@
int i;
char *s;
struct sockaddr_in *in4 = (void *)ss;
- unsigned char *quad = (void *)&in4->sin_addr.s_addr;
struct sockaddr_in6 *in6 = (void *)ss;
spin_lock(&addr_str_lock);
@@ -64,25 +64,13 @@
switch (ss->ss_family) {
case AF_INET:
- sprintf(s, "%u.%u.%u.%u:%u",
- (unsigned int)quad[0],
- (unsigned int)quad[1],
- (unsigned int)quad[2],
- (unsigned int)quad[3],
- (unsigned int)ntohs(in4->sin_port));
+ snprintf(s, MAX_ADDR_STR_LEN, "%pI4:%u", &in4->sin_addr,
+ (unsigned int)ntohs(in4->sin_port));
break;
case AF_INET6:
- sprintf(s, "%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x:%u",
- in6->sin6_addr.s6_addr16[0],
- in6->sin6_addr.s6_addr16[1],
- in6->sin6_addr.s6_addr16[2],
- in6->sin6_addr.s6_addr16[3],
- in6->sin6_addr.s6_addr16[4],
- in6->sin6_addr.s6_addr16[5],
- in6->sin6_addr.s6_addr16[6],
- in6->sin6_addr.s6_addr16[7],
- (unsigned int)ntohs(in6->sin6_port));
+ snprintf(s, MAX_ADDR_STR_LEN, "[%pI6c]:%u", &in6->sin6_addr,
+ (unsigned int)ntohs(in6->sin6_port));
break;
default:
@@ -120,6 +108,12 @@
destroy_workqueue(ceph_msgr_wq);
}
+void ceph_msgr_flush()
+{
+ flush_workqueue(ceph_msgr_wq);
+}
+
+
/*
* socket callback functions
*/
@@ -209,12 +203,13 @@
*/
static struct socket *ceph_tcp_connect(struct ceph_connection *con)
{
- struct sockaddr *paddr = (struct sockaddr *)&con->peer_addr.in_addr;
+ struct sockaddr_storage *paddr = &con->peer_addr.in_addr;
struct socket *sock;
int ret;
BUG_ON(con->sock);
- ret = sock_create_kern(AF_INET, SOCK_STREAM, IPPROTO_TCP, &sock);
+ ret = sock_create_kern(con->peer_addr.in_addr.ss_family, SOCK_STREAM,
+ IPPROTO_TCP, &sock);
if (ret)
return ERR_PTR(ret);
con->sock = sock;
@@ -228,7 +223,8 @@
dout("connect %s\n", pr_addr(&con->peer_addr.in_addr));
- ret = sock->ops->connect(sock, paddr, sizeof(*paddr), O_NONBLOCK);
+ ret = sock->ops->connect(sock, (struct sockaddr *)paddr, sizeof(*paddr),
+ O_NONBLOCK);
if (ret == -EINPROGRESS) {
dout("connect %s EINPROGRESS sk_state = %u\n",
pr_addr(&con->peer_addr.in_addr),
@@ -651,7 +647,7 @@
dout("prepare_write_connect %p cseq=%d gseq=%d proto=%d\n", con,
con->connect_seq, global_seq, proto);
- con->out_connect.features = CEPH_FEATURE_SUPPORTED_CLIENT;
+ con->out_connect.features = cpu_to_le64(CEPH_FEATURE_SUPPORTED_CLIENT);
con->out_connect.host_type = cpu_to_le32(CEPH_ENTITY_TYPE_CLIENT);
con->out_connect.connect_seq = cpu_to_le32(con->connect_seq);
con->out_connect.global_seq = cpu_to_le32(global_seq);
@@ -1003,19 +999,32 @@
struct sockaddr_in *in4 = (void *)ss;
struct sockaddr_in6 *in6 = (void *)ss;
int port;
+ char delim = ',';
+
+ if (*p == '[') {
+ delim = ']';
+ p++;
+ }
memset(ss, 0, sizeof(*ss));
if (in4_pton(p, end - p, (u8 *)&in4->sin_addr.s_addr,
- ',', &ipend)) {
+ delim, &ipend))
ss->ss_family = AF_INET;
- } else if (in6_pton(p, end - p, (u8 *)&in6->sin6_addr.s6_addr,
- ',', &ipend)) {
+ else if (in6_pton(p, end - p, (u8 *)&in6->sin6_addr.s6_addr,
+ delim, &ipend))
ss->ss_family = AF_INET6;
- } else {
+ else
goto bad;
- }
p = ipend;
+ if (delim == ']') {
+ if (*p != ']') {
+ dout("missing matching ']'\n");
+ goto bad;
+ }
+ p++;
+ }
+
/* port? */
if (p < end && *p == ':') {
port = 0;
@@ -1049,7 +1058,7 @@
return 0;
bad:
- pr_err("parse_ips bad ip '%s'\n", c);
+ pr_err("parse_ips bad ip '%.*s'\n", (int)(end - c), c);
return -EINVAL;
}
@@ -1390,10 +1399,12 @@
if (!con->in_msg) {
dout("got hdr type %d front %d data %d\n", con->in_hdr.type,
con->in_hdr.front_len, con->in_hdr.data_len);
+ skip = 0;
con->in_msg = ceph_alloc_msg(con, &con->in_hdr, &skip);
if (skip) {
/* skip this message */
dout("alloc_msg said skip message\n");
+ BUG_ON(con->in_msg);
con->in_base_pos = -front_len - middle_len - data_len -
sizeof(m->footer);
con->in_tag = CEPH_MSGR_TAG_READY;
@@ -2007,20 +2018,20 @@
{
mutex_lock(&con->mutex);
if (!list_empty(&msg->list_head)) {
- dout("con_revoke %p msg %p\n", con, msg);
+ dout("con_revoke %p msg %p - was on queue\n", con, msg);
list_del_init(&msg->list_head);
ceph_msg_put(msg);
msg->hdr.seq = 0;
- if (con->out_msg == msg) {
- ceph_msg_put(con->out_msg);
- con->out_msg = NULL;
- }
+ }
+ if (con->out_msg == msg) {
+ dout("con_revoke %p msg %p - was sending\n", con, msg);
+ con->out_msg = NULL;
if (con->out_kvec_is_msg) {
con->out_skip = con->out_kvec_bytes;
con->out_kvec_is_msg = false;
}
- } else {
- dout("con_revoke %p msg %p - not queued (sent?)\n", con, msg);
+ ceph_msg_put(msg);
+ msg->hdr.seq = 0;
}
mutex_unlock(&con->mutex);
}
diff --git a/fs/ceph/messenger.h b/fs/ceph/messenger.h
index 00a9430..76fbc95 100644
--- a/fs/ceph/messenger.h
+++ b/fs/ceph/messenger.h
@@ -213,6 +213,7 @@
extern int ceph_msgr_init(void);
extern void ceph_msgr_exit(void);
+extern void ceph_msgr_flush(void);
extern struct ceph_messenger *ceph_messenger_create(
struct ceph_entity_addr *myaddr);
diff --git a/fs/ceph/mon_client.c b/fs/ceph/mon_client.c
index f6510a4..cc115ea 100644
--- a/fs/ceph/mon_client.c
+++ b/fs/ceph/mon_client.c
@@ -400,6 +400,8 @@
ceph_msg_put(req->reply);
if (req->request)
ceph_msg_put(req->request);
+
+ kfree(req);
}
static void put_generic_request(struct ceph_mon_generic_request *req)
@@ -704,8 +706,11 @@
struct ceph_msg *msg)
{
int ret;
+ int was_auth = 0;
mutex_lock(&monc->mutex);
+ if (monc->auth->ops)
+ was_auth = monc->auth->ops->is_authenticated(monc->auth);
monc->pending_auth = 0;
ret = ceph_handle_auth_reply(monc->auth, msg->front.iov_base,
msg->front.iov_len,
@@ -716,11 +721,12 @@
wake_up(&monc->client->auth_wq);
} else if (ret > 0) {
__send_prepared_auth_request(monc, ret);
- } else if (monc->auth->ops->is_authenticated(monc->auth)) {
+ } else if (!was_auth && monc->auth->ops->is_authenticated(monc->auth)) {
dout("authenticated, starting session\n");
monc->client->msgr->inst.name.type = CEPH_ENTITY_TYPE_CLIENT;
- monc->client->msgr->inst.name.num = monc->auth->global_id;
+ monc->client->msgr->inst.name.num =
+ cpu_to_le64(monc->auth->global_id);
__send_subscribe(monc);
__resend_generic_request(monc);
diff --git a/fs/ceph/osd_client.c b/fs/ceph/osd_client.c
index afa7bb3..92b7251 100644
--- a/fs/ceph/osd_client.c
+++ b/fs/ceph/osd_client.c
@@ -361,8 +361,13 @@
{
dout("put_osd %p %d -> %d\n", osd, atomic_read(&osd->o_ref),
atomic_read(&osd->o_ref) - 1);
- if (atomic_dec_and_test(&osd->o_ref))
+ if (atomic_dec_and_test(&osd->o_ref)) {
+ struct ceph_auth_client *ac = osd->o_osdc->client->monc.auth;
+
+ if (osd->o_authorizer)
+ ac->ops->destroy_authorizer(ac, osd->o_authorizer);
kfree(osd);
+ }
}
/*
@@ -1339,7 +1344,7 @@
int type = le16_to_cpu(msg->hdr.type);
if (!osd)
- return;
+ goto out;
osdc = osd->o_osdc;
switch (type) {
@@ -1354,6 +1359,7 @@
pr_err("received unknown message type %d %s\n", type,
ceph_msg_type_name(type));
}
+out:
ceph_msg_put(msg);
}
diff --git a/fs/ceph/osdmap.c b/fs/ceph/osdmap.c
index cfdd8f4..277f8b3 100644
--- a/fs/ceph/osdmap.c
+++ b/fs/ceph/osdmap.c
@@ -568,6 +568,7 @@
if (ev > CEPH_PG_POOL_VERSION) {
pr_warning("got unknown v %d > %d of ceph_pg_pool\n",
ev, CEPH_PG_POOL_VERSION);
+ kfree(pi);
goto bad;
}
__decode_pool(p, pi);
@@ -706,7 +707,8 @@
len, *p, end);
newcrush = crush_decode(*p, min(*p+len, end));
if (IS_ERR(newcrush))
- return ERR_PTR(PTR_ERR(newcrush));
+ return ERR_CAST(newcrush);
+ *p += len;
}
/* new flags? */
diff --git a/fs/ceph/super.c b/fs/ceph/super.c
index 7c663d9..fa87f51 100644
--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -89,7 +89,7 @@
buf->f_files = le64_to_cpu(st.num_objects);
buf->f_ffree = -1;
- buf->f_namelen = PATH_MAX;
+ buf->f_namelen = NAME_MAX;
buf->f_frsize = PAGE_CACHE_SIZE;
/* leave fsid little-endian, regardless of host endianness */
@@ -669,9 +669,17 @@
/* unmount */
ceph_mdsc_stop(&client->mdsc);
- ceph_monc_stop(&client->monc);
ceph_osdc_stop(&client->osdc);
+ /*
+ * make sure mds and osd connections close out before destroying
+ * the auth module, which is needed to free those connections'
+ * ceph_authorizers.
+ */
+ ceph_msgr_flush();
+
+ ceph_monc_stop(&client->monc);
+
ceph_adjust_min_caps(-client->min_caps);
ceph_debugfs_client_cleanup(client);
@@ -738,7 +746,7 @@
dout("open_root_inode opening '%s'\n", path);
req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_GETATTR, USE_ANY_MDS);
if (IS_ERR(req))
- return ERR_PTR(PTR_ERR(req));
+ return ERR_CAST(req);
req->r_path1 = kstrdup(path, GFP_NOFS);
req->r_ino1.ino = CEPH_INO_ROOT;
req->r_ino1.snap = CEPH_NOSNAP;
@@ -918,7 +926,7 @@
/*
* construct our own bdi so we can control readahead, etc.
*/
-static atomic_long_t bdi_seq = ATOMIC_INIT(0);
+static atomic_long_t bdi_seq = ATOMIC_LONG_INIT(0);
static int ceph_register_bdi(struct super_block *sb, struct ceph_client *client)
{
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index 3725c9e..10a4a40 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -10,7 +10,6 @@
#include <linux/fs.h>
#include <linux/mempool.h>
#include <linux/pagemap.h>
-#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/writeback.h>
#include <linux/slab.h>
@@ -811,7 +810,7 @@
extern void ceph_queue_caps_release(struct inode *inode);
extern int ceph_write_inode(struct inode *inode, struct writeback_control *wbc);
-extern int ceph_fsync(struct file *file, struct dentry *dentry, int datasync);
+extern int ceph_fsync(struct file *file, int datasync);
extern void ceph_kick_flushing_caps(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session);
extern int ceph_get_cap_mds(struct inode *inode);
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 78c02eb..2cb1a70 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -473,14 +473,24 @@
return 0;
}
+void cifs_drop_inode(struct inode *inode)
+{
+ struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
+ return generic_drop_inode(inode);
+
+ return generic_delete_inode(inode);
+}
+
static const struct super_operations cifs_super_ops = {
.put_super = cifs_put_super,
.statfs = cifs_statfs,
.alloc_inode = cifs_alloc_inode,
.destroy_inode = cifs_destroy_inode,
-/* .drop_inode = generic_delete_inode,
- .delete_inode = cifs_delete_inode, */ /* Do not need above two
- functions unless later we add lazy close of inodes or unless the
+ .drop_inode = cifs_drop_inode,
+/* .delete_inode = cifs_delete_inode, */ /* Do not need above
+ function unless later we add lazy close of inodes or unless the
kernel forgets to call us with the same number of releases (closes)
as opens */
.show_options = cifs_show_options,
@@ -913,7 +923,7 @@
goto out_unregister_filesystem;
#endif
#ifdef CONFIG_CIFS_DFS_UPCALL
- rc = register_key_type(&key_type_dns_resolver);
+ rc = cifs_init_dns_resolver();
if (rc)
goto out_unregister_key_type;
#endif
@@ -925,7 +935,7 @@
out_unregister_resolver_key:
#ifdef CONFIG_CIFS_DFS_UPCALL
- unregister_key_type(&key_type_dns_resolver);
+ cifs_exit_dns_resolver();
out_unregister_key_type:
#endif
#ifdef CONFIG_CIFS_UPCALL
@@ -951,7 +961,7 @@
cifs_proc_clean();
#ifdef CONFIG_CIFS_DFS_UPCALL
cifs_dfs_release_automount_timer();
- unregister_key_type(&key_type_dns_resolver);
+ cifs_exit_dns_resolver();
#endif
#ifdef CONFIG_CIFS_UPCALL
unregister_key_type(&cifs_spnego_key_type);
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 0242ff9..a7eb65c 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -84,7 +84,7 @@
extern ssize_t cifs_user_write(struct file *file, const char __user *write_data,
size_t write_size, loff_t *poffset);
extern int cifs_lock(struct file *, int, struct file_lock *);
-extern int cifs_fsync(struct file *, struct dentry *, int);
+extern int cifs_fsync(struct file *, int);
extern int cifs_flush(struct file *, fl_owner_t id);
extern int cifs_file_mmap(struct file * , struct vm_area_struct *);
extern const struct file_operations cifs_dir_ops;
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index fb1657e..fb6318b 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -106,7 +106,6 @@
__u16 fileHandle, struct file *file,
struct vfsmount *mnt, unsigned int oflags);
extern int cifs_posix_open(char *full_path, struct inode **pinode,
- struct vfsmount *mnt,
struct super_block *sb,
int mode, int oflags,
__u32 *poplock, __u16 *pnetfid, int xid);
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 391816b..e7ae78b 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -25,6 +25,7 @@
#include <linux/slab.h>
#include <linux/namei.h>
#include <linux/mount.h>
+#include <linux/file.h>
#include "cifsfs.h"
#include "cifspdu.h"
#include "cifsglob.h"
@@ -184,12 +185,13 @@
}
write_unlock(&GlobalSMBSeslock);
+ file->private_data = pCifsFile;
+
return pCifsFile;
}
int cifs_posix_open(char *full_path, struct inode **pinode,
- struct vfsmount *mnt, struct super_block *sb,
- int mode, int oflags,
+ struct super_block *sb, int mode, int oflags,
__u32 *poplock, __u16 *pnetfid, int xid)
{
int rc;
@@ -258,19 +260,6 @@
cifs_fattr_to_inode(*pinode, &fattr);
}
- /*
- * cifs_fill_filedata() takes care of setting cifsFileInfo pointer to
- * file->private_data.
- */
- if (mnt) {
- struct cifsFileInfo *pfile_info;
-
- pfile_info = cifs_new_fileinfo(*pinode, *pnetfid, NULL, mnt,
- oflags);
- if (pfile_info == NULL)
- rc = -ENOMEM;
- }
-
posix_open_ret:
kfree(presp_data);
return rc;
@@ -298,7 +287,6 @@
int create_options = CREATE_NOT_DIR;
__u32 oplock = 0;
int oflags;
- bool posix_create = false;
/*
* BB below access is probably too much for mknod to request
* but we have to do query and setpathinfo so requesting
@@ -339,7 +327,6 @@
(CIFS_UNIX_POSIX_PATH_OPS_CAP &
le64_to_cpu(tcon->fsUnixInfo.Capability))) {
rc = cifs_posix_open(full_path, &newinode,
- nd ? nd->path.mnt : NULL,
inode->i_sb, mode, oflags, &oplock, &fileHandle, xid);
/* EIO could indicate that (posix open) operation is not
supported, despite what server claimed in capability
@@ -347,7 +334,6 @@
handled in posix open */
if (rc == 0) {
- posix_create = true;
if (newinode == NULL) /* query inode info */
goto cifs_create_get_file_info;
else /* success, no need to query */
@@ -478,21 +464,28 @@
else
cFYI(1, "Create worked, get_inode_info failed rc = %d", rc);
- /* nfsd case - nfs srv does not set nd */
- if ((nd == NULL) || (!(nd->flags & LOOKUP_OPEN))) {
- /* mknod case - do not leave file open */
- CIFSSMBClose(xid, tcon, fileHandle);
- } else if (!(posix_create) && (newinode)) {
+ if (newinode && nd && (nd->flags & LOOKUP_OPEN)) {
struct cifsFileInfo *pfile_info;
- /*
- * cifs_fill_filedata() takes care of setting cifsFileInfo
- * pointer to file->private_data.
- */
- pfile_info = cifs_new_fileinfo(newinode, fileHandle, NULL,
+ struct file *filp;
+
+ filp = lookup_instantiate_filp(nd, direntry, generic_file_open);
+ if (IS_ERR(filp)) {
+ rc = PTR_ERR(filp);
+ CIFSSMBClose(xid, tcon, fileHandle);
+ goto cifs_create_out;
+ }
+
+ pfile_info = cifs_new_fileinfo(newinode, fileHandle, filp,
nd->path.mnt, oflags);
- if (pfile_info == NULL)
+ if (pfile_info == NULL) {
+ fput(filp);
+ CIFSSMBClose(xid, tcon, fileHandle);
rc = -ENOMEM;
+ }
+ } else {
+ CIFSSMBClose(xid, tcon, fileHandle);
}
+
cifs_create_out:
kfree(buf);
kfree(full_path);
@@ -636,6 +629,7 @@
bool posix_open = false;
struct cifs_sb_info *cifs_sb;
struct cifsTconInfo *pTcon;
+ struct cifsFileInfo *cfile;
struct inode *newInode = NULL;
char *full_path = NULL;
struct file *filp;
@@ -703,7 +697,7 @@
if (nd && !(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) &&
(nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open &&
(nd->intent.open.flags & O_CREAT)) {
- rc = cifs_posix_open(full_path, &newInode, nd->path.mnt,
+ rc = cifs_posix_open(full_path, &newInode,
parent_dir_inode->i_sb,
nd->intent.open.create_mode,
nd->intent.open.flags, &oplock,
@@ -733,8 +727,25 @@
else
direntry->d_op = &cifs_dentry_ops;
d_add(direntry, newInode);
- if (posix_open)
- filp = lookup_instantiate_filp(nd, direntry, NULL);
+ if (posix_open) {
+ filp = lookup_instantiate_filp(nd, direntry,
+ generic_file_open);
+ if (IS_ERR(filp)) {
+ rc = PTR_ERR(filp);
+ CIFSSMBClose(xid, pTcon, fileHandle);
+ goto lookup_out;
+ }
+
+ cfile = cifs_new_fileinfo(newInode, fileHandle, filp,
+ nd->path.mnt,
+ nd->intent.open.flags);
+ if (cfile == NULL) {
+ fput(filp);
+ CIFSSMBClose(xid, pTcon, fileHandle);
+ rc = -ENOMEM;
+ goto lookup_out;
+ }
+ }
/* since paths are not looked up by component - the parent
directories are presumed to be good here */
renew_parental_timestamps(direntry);
@@ -755,6 +766,7 @@
is a common return code */
}
+lookup_out:
kfree(full_path);
FreeXid(xid);
return ERR_PTR(rc);
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index 4db2c5e..49315cb 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -24,12 +24,16 @@
*/
#include <linux/slab.h>
+#include <linux/keyctl.h>
+#include <linux/key-type.h>
#include <keys/user-type.h>
#include "dns_resolve.h"
#include "cifsglob.h"
#include "cifsproto.h"
#include "cifs_debug.h"
+static const struct cred *dns_resolver_cache;
+
/* Checks if supplied name is IP address
* returns:
* 1 - name is IP
@@ -94,6 +98,7 @@
int
dns_resolve_server_name_to_ip(const char *unc, char **ip_addr)
{
+ const struct cred *saved_cred;
int rc = -EAGAIN;
struct key *rkey = ERR_PTR(-EAGAIN);
char *name;
@@ -133,8 +138,15 @@
goto skip_upcall;
}
+ saved_cred = override_creds(dns_resolver_cache);
rkey = request_key(&key_type_dns_resolver, name, "");
+ revert_creds(saved_cred);
if (!IS_ERR(rkey)) {
+ if (!(rkey->perm & KEY_USR_VIEW)) {
+ down_read(&rkey->sem);
+ rkey->perm |= KEY_USR_VIEW;
+ up_read(&rkey->sem);
+ }
len = rkey->type_data.x[0];
data = rkey->payload.data;
} else {
@@ -165,4 +177,61 @@
return rc;
}
+int __init cifs_init_dns_resolver(void)
+{
+ struct cred *cred;
+ struct key *keyring;
+ int ret;
+ printk(KERN_NOTICE "Registering the %s key type\n",
+ key_type_dns_resolver.name);
+
+ /* create an override credential set with a special thread keyring in
+ * which DNS requests are cached
+ *
+ * this is used to prevent malicious redirections from being installed
+ * with add_key().
+ */
+ cred = prepare_kernel_cred(NULL);
+ if (!cred)
+ return -ENOMEM;
+
+ keyring = key_alloc(&key_type_keyring, ".dns_resolver", 0, 0, cred,
+ (KEY_POS_ALL & ~KEY_POS_SETATTR) |
+ KEY_USR_VIEW | KEY_USR_READ,
+ KEY_ALLOC_NOT_IN_QUOTA);
+ if (IS_ERR(keyring)) {
+ ret = PTR_ERR(keyring);
+ goto failed_put_cred;
+ }
+
+ ret = key_instantiate_and_link(keyring, NULL, 0, NULL, NULL);
+ if (ret < 0)
+ goto failed_put_key;
+
+ ret = register_key_type(&key_type_dns_resolver);
+ if (ret < 0)
+ goto failed_put_key;
+
+ /* instruct request_key() to use this special keyring as a cache for
+ * the results it looks up */
+ cred->thread_keyring = keyring;
+ cred->jit_keyring = KEY_REQKEY_DEFL_THREAD_KEYRING;
+ dns_resolver_cache = cred;
+ return 0;
+
+failed_put_key:
+ key_put(keyring);
+failed_put_cred:
+ put_cred(cred);
+ return ret;
+}
+
+void __exit cifs_exit_dns_resolver(void)
+{
+ key_revoke(dns_resolver_cache->thread_keyring);
+ unregister_key_type(&key_type_dns_resolver);
+ put_cred(dns_resolver_cache);
+ printk(KERN_NOTICE "Unregistered %s key type\n",
+ key_type_dns_resolver.name);
+}
diff --git a/fs/cifs/dns_resolve.h b/fs/cifs/dns_resolve.h
index 966e928..26b9eaa 100644
--- a/fs/cifs/dns_resolve.h
+++ b/fs/cifs/dns_resolve.h
@@ -24,8 +24,8 @@
#define _DNS_RESOLVE_H
#ifdef __KERNEL__
-#include <linux/key-type.h>
-extern struct key_type key_type_dns_resolver;
+extern int __init cifs_init_dns_resolver(void);
+extern void __exit cifs_exit_dns_resolver(void);
extern int dns_resolve_server_name_to_ip(const char *unc, char **ip_addr);
#endif /* KERNEL */
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index a83541e..409e4f5 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -162,44 +162,12 @@
return 0;
}
-static struct cifsFileInfo *
-cifs_fill_filedata(struct file *file)
-{
- struct list_head *tmp;
- struct cifsFileInfo *pCifsFile = NULL;
- struct cifsInodeInfo *pCifsInode = NULL;
-
- /* search inode for this file and fill in file->private_data */
- pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
- read_lock(&GlobalSMBSeslock);
- list_for_each(tmp, &pCifsInode->openFileList) {
- pCifsFile = list_entry(tmp, struct cifsFileInfo, flist);
- if ((pCifsFile->pfile == NULL) &&
- (pCifsFile->pid == current->tgid)) {
- /* mode set in cifs_create */
-
- /* needed for writepage */
- pCifsFile->pfile = file;
- file->private_data = pCifsFile;
- break;
- }
- }
- read_unlock(&GlobalSMBSeslock);
-
- if (file->private_data != NULL) {
- return pCifsFile;
- } else if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL))
- cERROR(1, "could not find file instance for "
- "new file %p", file);
- return NULL;
-}
-
/* all arguments to this function must be checked for validity in caller */
-static inline int cifs_open_inode_helper(struct inode *inode, struct file *file,
- struct cifsInodeInfo *pCifsInode, struct cifsFileInfo *pCifsFile,
+static inline int cifs_open_inode_helper(struct inode *inode,
struct cifsTconInfo *pTcon, int *oplock, FILE_ALL_INFO *buf,
char *full_path, int xid)
{
+ struct cifsInodeInfo *pCifsInode = CIFS_I(inode);
struct timespec temp;
int rc;
@@ -213,36 +181,35 @@
/* if not oplocked, invalidate inode pages if mtime or file
size changed */
temp = cifs_NTtimeToUnix(buf->LastWriteTime);
- if (timespec_equal(&file->f_path.dentry->d_inode->i_mtime, &temp) &&
- (file->f_path.dentry->d_inode->i_size ==
+ if (timespec_equal(&inode->i_mtime, &temp) &&
+ (inode->i_size ==
(loff_t)le64_to_cpu(buf->EndOfFile))) {
cFYI(1, "inode unchanged on server");
} else {
- if (file->f_path.dentry->d_inode->i_mapping) {
+ if (inode->i_mapping) {
/* BB no need to lock inode until after invalidate
since namei code should already have it locked? */
- rc = filemap_write_and_wait(file->f_path.dentry->d_inode->i_mapping);
+ rc = filemap_write_and_wait(inode->i_mapping);
if (rc != 0)
- CIFS_I(file->f_path.dentry->d_inode)->write_behind_rc = rc;
+ pCifsInode->write_behind_rc = rc;
}
cFYI(1, "invalidating remote inode since open detected it "
"changed");
- invalidate_remote_inode(file->f_path.dentry->d_inode);
+ invalidate_remote_inode(inode);
}
client_can_cache:
if (pTcon->unix_ext)
- rc = cifs_get_inode_info_unix(&file->f_path.dentry->d_inode,
- full_path, inode->i_sb, xid);
+ rc = cifs_get_inode_info_unix(&inode, full_path, inode->i_sb,
+ xid);
else
- rc = cifs_get_inode_info(&file->f_path.dentry->d_inode,
- full_path, buf, inode->i_sb, xid, NULL);
+ rc = cifs_get_inode_info(&inode, full_path, buf, inode->i_sb,
+ xid, NULL);
if ((*oplock & 0xF) == OPLOCK_EXCLUSIVE) {
pCifsInode->clientCanCacheAll = true;
pCifsInode->clientCanCacheRead = true;
- cFYI(1, "Exclusive Oplock granted on inode %p",
- file->f_path.dentry->d_inode);
+ cFYI(1, "Exclusive Oplock granted on inode %p", inode);
} else if ((*oplock & 0xF) == OPLOCK_READ)
pCifsInode->clientCanCacheRead = true;
@@ -256,7 +223,7 @@
__u32 oplock;
struct cifs_sb_info *cifs_sb;
struct cifsTconInfo *tcon;
- struct cifsFileInfo *pCifsFile;
+ struct cifsFileInfo *pCifsFile = NULL;
struct cifsInodeInfo *pCifsInode;
char *full_path = NULL;
int desiredAccess;
@@ -270,12 +237,6 @@
tcon = cifs_sb->tcon;
pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
- pCifsFile = cifs_fill_filedata(file);
- if (pCifsFile) {
- rc = 0;
- FreeXid(xid);
- return rc;
- }
full_path = build_path_from_dentry(file->f_path.dentry);
if (full_path == NULL) {
@@ -299,8 +260,7 @@
int oflags = (int) cifs_posix_convert_flags(file->f_flags);
oflags |= SMB_O_CREAT;
/* can not refresh inode info since size could be stale */
- rc = cifs_posix_open(full_path, &inode, file->f_path.mnt,
- inode->i_sb,
+ rc = cifs_posix_open(full_path, &inode, inode->i_sb,
cifs_sb->mnt_file_mode /* ignored */,
oflags, &oplock, &netfid, xid);
if (rc == 0) {
@@ -308,9 +268,20 @@
/* no need for special case handling of setting mode
on read only files needed here */
- pCifsFile = cifs_fill_filedata(file);
- cifs_posix_open_inode_helper(inode, file, pCifsInode,
- oplock, netfid);
+ rc = cifs_posix_open_inode_helper(inode, file,
+ pCifsInode, oplock, netfid);
+ if (rc != 0) {
+ CIFSSMBClose(xid, tcon, netfid);
+ goto out;
+ }
+
+ pCifsFile = cifs_new_fileinfo(inode, netfid, file,
+ file->f_path.mnt,
+ oflags);
+ if (pCifsFile == NULL) {
+ CIFSSMBClose(xid, tcon, netfid);
+ rc = -ENOMEM;
+ }
goto out;
} else if ((rc == -EINVAL) || (rc == -EOPNOTSUPP)) {
if (tcon->ses->serverNOS)
@@ -391,17 +362,17 @@
goto out;
}
+ rc = cifs_open_inode_helper(inode, tcon, &oplock, buf, full_path, xid);
+ if (rc != 0)
+ goto out;
+
pCifsFile = cifs_new_fileinfo(inode, netfid, file, file->f_path.mnt,
file->f_flags);
- file->private_data = pCifsFile;
- if (file->private_data == NULL) {
+ if (pCifsFile == NULL) {
rc = -ENOMEM;
goto out;
}
- rc = cifs_open_inode_helper(inode, file, pCifsInode, pCifsFile, tcon,
- &oplock, buf, full_path, xid);
-
if (oplock & CIFS_CREATE_ACTION) {
/* time to set mode which we can not set earlier due to
problems creating new read-only files */
@@ -513,8 +484,7 @@
le64_to_cpu(tcon->fsUnixInfo.Capability))) {
int oflags = (int) cifs_posix_convert_flags(file->f_flags);
/* can not refresh inode info since size could be stale */
- rc = cifs_posix_open(full_path, NULL, file->f_path.mnt,
- inode->i_sb,
+ rc = cifs_posix_open(full_path, NULL, inode->i_sb,
cifs_sb->mnt_file_mode /* ignored */,
oflags, &oplock, &netfid, xid);
if (rc == 0) {
@@ -1676,7 +1646,7 @@
return rc;
}
-int cifs_fsync(struct file *file, struct dentry *dentry, int datasync)
+int cifs_fsync(struct file *file, int datasync)
{
int xid;
int rc = 0;
@@ -1688,7 +1658,7 @@
xid = GetXid();
cFYI(1, "Sync file - name: %s datasync: 0x%x",
- dentry->d_name.name, datasync);
+ file->f_path.dentry->d_name.name, datasync);
rc = filemap_write_and_wait(inode->i_mapping);
if (rc == 0) {
@@ -1952,6 +1922,7 @@
bytes_read -= PAGE_CACHE_SIZE;
continue;
}
+ page_cache_release(page);
target = kmap_atomic(page, KM_USER0);
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 62b324f..6f0683c 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -1401,6 +1401,10 @@
if (rc == 0 || rc != -ETXTBSY)
return rc;
+ /* open-file renames don't work across directories */
+ if (to_dentry->d_parent != from_dentry->d_parent)
+ return rc;
+
/* open the file to be renamed -- we need DELETE perms */
rc = CIFSSMBOpen(xid, pTcon, fromPath, FILE_OPEN, DELETE,
CREATE_NOT_DIR, &srcfid, &oplock, NULL,
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 7707389..0a57cb7 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -730,15 +730,7 @@
/* calculate session key */
setup_ntlmv2_rsp(ses, v2_sess_key, nls_cp);
- if (first_time) /* should this be moved into common code
- with similar ntlmv2 path? */
- /* cifs_calculate_ntlmv2_mac_key(ses->server->mac_signing_key,
- response BB FIXME, v2_sess_key); */
-
- /* copy session key */
-
- /* memcpy(bcc_ptr, (char *)ntlm_session_key,LM2_SESS_KEY_SIZE);
- bcc_ptr += LM2_SESS_KEY_SIZE; */
+ /* FIXME: calculate MAC key */
memcpy(bcc_ptr, (char *)v2_sess_key,
sizeof(struct ntlmv2_resp));
bcc_ptr += sizeof(struct ntlmv2_resp);
diff --git a/fs/coda/coda_int.h b/fs/coda/coda_int.h
index d99860a..6b443ff 100644
--- a/fs/coda/coda_int.h
+++ b/fs/coda/coda_int.h
@@ -11,8 +11,7 @@
void coda_destroy_inodecache(void);
int coda_init_inodecache(void);
-int coda_fsync(struct file *coda_file, struct dentry *coda_dentry,
- int datasync);
+int coda_fsync(struct file *coda_file, int datasync);
void coda_sysctl_init(void);
void coda_sysctl_clean(void);
diff --git a/fs/coda/file.c b/fs/coda/file.c
index 7196077..ad3cd2a 100644
--- a/fs/coda/file.c
+++ b/fs/coda/file.c
@@ -202,10 +202,10 @@
return 0;
}
-int coda_fsync(struct file *coda_file, struct dentry *coda_dentry, int datasync)
+int coda_fsync(struct file *coda_file, int datasync)
{
struct file *host_file;
- struct inode *coda_inode = coda_dentry->d_inode;
+ struct inode *coda_inode = coda_file->f_path.dentry->d_inode;
struct coda_file_info *cfi;
int err = 0;
diff --git a/fs/compat.c b/fs/compat.c
index 0544873..6490d21 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -568,6 +568,79 @@
return ret;
}
+/* A write operation does a read from user space and vice versa */
+#define vrfy_dir(type) ((type) == READ ? VERIFY_WRITE : VERIFY_READ)
+
+ssize_t compat_rw_copy_check_uvector(int type,
+ const struct compat_iovec __user *uvector, unsigned long nr_segs,
+ unsigned long fast_segs, struct iovec *fast_pointer,
+ struct iovec **ret_pointer)
+{
+ compat_ssize_t tot_len;
+ struct iovec *iov = *ret_pointer = fast_pointer;
+ ssize_t ret = 0;
+ int seg;
+
+ /*
+ * SuS says "The readv() function *may* fail if the iovcnt argument
+ * was less than or equal to 0, or greater than {IOV_MAX}. Linux has
+ * traditionally returned zero for zero segments, so...
+ */
+ if (nr_segs == 0)
+ goto out;
+
+ ret = -EINVAL;
+ if (nr_segs > UIO_MAXIOV || nr_segs < 0)
+ goto out;
+ if (nr_segs > fast_segs) {
+ ret = -ENOMEM;
+ iov = kmalloc(nr_segs*sizeof(struct iovec), GFP_KERNEL);
+ if (iov == NULL) {
+ *ret_pointer = fast_pointer;
+ goto out;
+ }
+ }
+ *ret_pointer = iov;
+
+ /*
+ * Single unix specification:
+ * We should -EINVAL if an element length is not >= 0 and fitting an
+ * ssize_t. The total length is fitting an ssize_t
+ *
+ * Be careful here because iov_len is a size_t not an ssize_t
+ */
+ tot_len = 0;
+ ret = -EINVAL;
+ for (seg = 0; seg < nr_segs; seg++) {
+ compat_ssize_t tmp = tot_len;
+ compat_uptr_t buf;
+ compat_ssize_t len;
+
+ if (__get_user(len, &uvector->iov_len) ||
+ __get_user(buf, &uvector->iov_base)) {
+ ret = -EFAULT;
+ goto out;
+ }
+ if (len < 0) /* size_t not fitting in compat_ssize_t .. */
+ goto out;
+ tot_len += len;
+ if (tot_len < tmp) /* maths overflow on the compat_ssize_t */
+ goto out;
+ if (!access_ok(vrfy_dir(type), compat_ptr(buf), len)) {
+ ret = -EFAULT;
+ goto out;
+ }
+ iov->iov_base = compat_ptr(buf);
+ iov->iov_len = (compat_size_t) len;
+ uvector++;
+ iov++;
+ }
+ ret = tot_len;
+
+out:
+ return ret;
+}
+
static inline long
copy_iocb(long nr, u32 __user *ptr32, struct iocb __user * __user *ptr64)
{
@@ -600,7 +673,7 @@
iocb64 = compat_alloc_user_space(nr * sizeof(*iocb64));
ret = copy_iocb(nr, iocb, iocb64);
if (!ret)
- ret = sys_io_submit(ctx_id, nr, iocb64);
+ ret = do_io_submit(ctx_id, nr, iocb64, 1);
return ret;
}
@@ -1077,70 +1150,21 @@
{
compat_ssize_t tot_len;
struct iovec iovstack[UIO_FASTIOV];
- struct iovec *iov=iovstack, *vector;
+ struct iovec *iov;
ssize_t ret;
- int seg;
io_fn_t fn;
iov_fn_t fnv;
- /*
- * SuS says "The readv() function *may* fail if the iovcnt argument
- * was less than or equal to 0, or greater than {IOV_MAX}. Linux has
- * traditionally returned zero for zero segments, so...
- */
- ret = 0;
- if (nr_segs == 0)
- goto out;
-
- /*
- * First get the "struct iovec" from user memory and
- * verify all the pointers
- */
ret = -EINVAL;
- if ((nr_segs > UIO_MAXIOV) || (nr_segs <= 0))
- goto out;
if (!file->f_op)
goto out;
- if (nr_segs > UIO_FASTIOV) {
- ret = -ENOMEM;
- iov = kmalloc(nr_segs*sizeof(struct iovec), GFP_KERNEL);
- if (!iov)
- goto out;
- }
+
ret = -EFAULT;
if (!access_ok(VERIFY_READ, uvector, nr_segs*sizeof(*uvector)))
goto out;
- /*
- * Single unix specification:
- * We should -EINVAL if an element length is not >= 0 and fitting an
- * ssize_t. The total length is fitting an ssize_t
- *
- * Be careful here because iov_len is a size_t not an ssize_t
- */
- tot_len = 0;
- vector = iov;
- ret = -EINVAL;
- for (seg = 0 ; seg < nr_segs; seg++) {
- compat_ssize_t tmp = tot_len;
- compat_ssize_t len;
- compat_uptr_t buf;
-
- if (__get_user(len, &uvector->iov_len) ||
- __get_user(buf, &uvector->iov_base)) {
- ret = -EFAULT;
- goto out;
- }
- if (len < 0) /* size_t not fitting an compat_ssize_t .. */
- goto out;
- tot_len += len;
- if (tot_len < tmp) /* maths overflow on the compat_ssize_t */
- goto out;
- vector->iov_base = compat_ptr(buf);
- vector->iov_len = (compat_size_t) len;
- uvector++;
- vector++;
- }
+ tot_len = compat_rw_copy_check_uvector(type, uvector, nr_segs,
+ UIO_FASTIOV, iovstack, &iov);
if (tot_len == 0) {
ret = 0;
goto out;
diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c
index c8af2d9..cf78d44 100644
--- a/fs/configfs/inode.c
+++ b/fs/configfs/inode.c
@@ -73,15 +73,6 @@
return -EINVAL;
sd_iattr = sd->s_iattr;
-
- error = inode_change_ok(inode, iattr);
- if (error)
- return error;
-
- error = inode_setattr(inode, iattr);
- if (error)
- return error;
-
if (!sd_iattr) {
/* setting attributes for the first time, allocate now */
sd_iattr = kzalloc(sizeof(struct iattr), GFP_KERNEL);
@@ -94,9 +85,12 @@
sd_iattr->ia_atime = sd_iattr->ia_mtime = sd_iattr->ia_ctime = CURRENT_TIME;
sd->s_iattr = sd_iattr;
}
-
/* attributes were changed atleast once in past */
+ error = simple_setattr(dentry, iattr);
+ if (error)
+ return error;
+
if (ia_valid & ATTR_UID)
sd_iattr->ia_uid = iattr->ia_uid;
if (ia_valid & ATTR_GID)
diff --git a/fs/dcache.c b/fs/dcache.c
index d96047b..86d4db1 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -590,6 +590,8 @@
up_read(&sb->s_umount);
}
spin_lock(&sb_lock);
+ /* lock was dropped, must reset next */
+ list_safe_reset_next(sb, n, s_list);
count -= pruned;
__put_super(sb);
/* more work left to do? */
@@ -894,7 +896,7 @@
*
* In this case we return -1 to tell the caller that we baled.
*/
-static int shrink_dcache_memory(int nr, gfp_t gfp_mask)
+static int shrink_dcache_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
{
if (nr) {
if (!(gfp_mask & __GFP_FS))
diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c
index 4d74fc7..0210898 100644
--- a/fs/debugfs/file.c
+++ b/fs/debugfs/file.c
@@ -277,8 +277,10 @@
DEFINE_SIMPLE_ATTRIBUTE(fops_x32_ro, debugfs_u32_get, NULL, "0x%08llx\n");
DEFINE_SIMPLE_ATTRIBUTE(fops_x32_wo, NULL, debugfs_u32_set, "0x%08llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_x64, debugfs_u64_get, debugfs_u64_set, "0x%016llx\n");
+
/*
- * debugfs_create_x{8,16,32} - create a debugfs file that is used to read and write an unsigned {8,16,32}-bit value
+ * debugfs_create_x{8,16,32,64} - create a debugfs file that is used to read and write an unsigned {8,16,32,64}-bit value
*
* These functions are exactly the same as the above functions (but use a hex
* output for the decimal challenged). For details look at the above unsigned
@@ -357,6 +359,23 @@
}
EXPORT_SYMBOL_GPL(debugfs_create_x32);
+/**
+ * debugfs_create_x64 - create a debugfs file that is used to read and write an unsigned 64-bit value
+ * @name: a pointer to a string containing the name of the file to create.
+ * @mode: the permission that the file should have
+ * @parent: a pointer to the parent dentry for this file. This should be a
+ * directory dentry if set. If this parameter is %NULL, then the
+ * file will be created in the root of the debugfs filesystem.
+ * @value: a pointer to the variable that the file should read to and write
+ * from.
+ */
+struct dentry *debugfs_create_x64(const char *name, mode_t mode,
+ struct dentry *parent, u64 *value)
+{
+ return debugfs_create_file(name, mode, parent, value, &fops_x64);
+}
+EXPORT_SYMBOL_GPL(debugfs_create_x64);
+
static int debugfs_size_t_set(void *data, u64 val)
{
diff --git a/fs/direct-io.c b/fs/direct-io.c
index e82adc2..7600aac 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -82,6 +82,8 @@
int reap_counter; /* rate limit reaping */
get_block_t *get_block; /* block mapping function */
dio_iodone_t *end_io; /* IO completion function */
+ dio_submit_t *submit_io; /* IO submition function */
+ loff_t logical_offset_in_bio; /* current first logical block in bio */
sector_t final_block_in_bio; /* current final block in bio + 1 */
sector_t next_block_for_io; /* next block to be put under IO,
in dio_blocks units */
@@ -96,6 +98,7 @@
unsigned cur_page_offset; /* Offset into it, in bytes */
unsigned cur_page_len; /* Nr of bytes at cur_page_offset */
sector_t cur_page_block; /* Where it starts */
+ loff_t cur_page_fs_offset; /* Offset in file */
/* BIO completion state */
spinlock_t bio_lock; /* protects BIO fields below */
@@ -300,6 +303,26 @@
spin_unlock_irqrestore(&dio->bio_lock, flags);
}
+/**
+ * dio_end_io - handle the end io action for the given bio
+ * @bio: The direct io bio thats being completed
+ * @error: Error if there was one
+ *
+ * This is meant to be called by any filesystem that uses their own dio_submit_t
+ * so that the DIO specific endio actions are dealt with after the filesystem
+ * has done it's completion work.
+ */
+void dio_end_io(struct bio *bio, int error)
+{
+ struct dio *dio = bio->bi_private;
+
+ if (dio->is_async)
+ dio_bio_end_aio(bio, error);
+ else
+ dio_bio_end_io(bio, error);
+}
+EXPORT_SYMBOL_GPL(dio_end_io);
+
static int
dio_bio_alloc(struct dio *dio, struct block_device *bdev,
sector_t first_sector, int nr_vecs)
@@ -316,6 +339,7 @@
bio->bi_end_io = dio_bio_end_io;
dio->bio = bio;
+ dio->logical_offset_in_bio = dio->cur_page_fs_offset;
return 0;
}
@@ -340,10 +364,15 @@
if (dio->is_async && dio->rw == READ)
bio_set_pages_dirty(bio);
- submit_bio(dio->rw, bio);
+ if (dio->submit_io)
+ dio->submit_io(dio->rw, bio, dio->inode,
+ dio->logical_offset_in_bio);
+ else
+ submit_bio(dio->rw, bio);
dio->bio = NULL;
dio->boundary = 0;
+ dio->logical_offset_in_bio = 0;
}
/*
@@ -603,10 +632,26 @@
int ret = 0;
if (dio->bio) {
+ loff_t cur_offset = dio->block_in_file << dio->blkbits;
+ loff_t bio_next_offset = dio->logical_offset_in_bio +
+ dio->bio->bi_size;
+
/*
- * See whether this new request is contiguous with the old
+ * See whether this new request is contiguous with the old.
+ *
+ * Btrfs cannot handl having logically non-contiguous requests
+ * submitted. For exmple if you have
+ *
+ * Logical: [0-4095][HOLE][8192-12287]
+ * Phyiscal: [0-4095] [4096-8181]
+ *
+ * We cannot submit those pages together as one BIO. So if our
+ * current logical offset in the file does not equal what would
+ * be the next logical offset in the bio, submit the bio we
+ * have.
*/
- if (dio->final_block_in_bio != dio->cur_page_block)
+ if (dio->final_block_in_bio != dio->cur_page_block ||
+ cur_offset != bio_next_offset)
dio_bio_submit(dio);
/*
* Submit now if the underlying fs is about to perform a
@@ -701,6 +746,7 @@
dio->cur_page_offset = offset;
dio->cur_page_len = len;
dio->cur_page_block = blocknr;
+ dio->cur_page_fs_offset = dio->block_in_file << dio->blkbits;
out:
return ret;
}
@@ -935,7 +981,7 @@
direct_io_worker(int rw, struct kiocb *iocb, struct inode *inode,
const struct iovec *iov, loff_t offset, unsigned long nr_segs,
unsigned blkbits, get_block_t get_block, dio_iodone_t end_io,
- struct dio *dio)
+ dio_submit_t submit_io, struct dio *dio)
{
unsigned long user_addr;
unsigned long flags;
@@ -952,6 +998,7 @@
dio->get_block = get_block;
dio->end_io = end_io;
+ dio->submit_io = submit_io;
dio->final_block_in_bio = -1;
dio->next_block_for_io = -1;
@@ -1008,7 +1055,7 @@
}
} /* end iovec loop */
- if (ret == -ENOTBLK && (rw & WRITE)) {
+ if (ret == -ENOTBLK) {
/*
* The remaining part of the request will be
* be handled by buffered I/O when we return
@@ -1087,30 +1134,11 @@
return ret;
}
-/*
- * This is a library function for use by filesystem drivers.
- *
- * The locking rules are governed by the flags parameter:
- * - if the flags value contains DIO_LOCKING we use a fancy locking
- * scheme for dumb filesystems.
- * For writes this function is called under i_mutex and returns with
- * i_mutex held, for reads, i_mutex is not held on entry, but it is
- * taken and dropped again before returning.
- * For reads and writes i_alloc_sem is taken in shared mode and released
- * on I/O completion (which may happen asynchronously after returning to
- * the caller).
- *
- * - if the flags value does NOT contain DIO_LOCKING we don't use any
- * internal locking but rather rely on the filesystem to synchronize
- * direct I/O reads/writes versus each other and truncate.
- * For reads and writes both i_mutex and i_alloc_sem are not held on
- * entry and are never taken.
- */
ssize_t
-__blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
+__blockdev_direct_IO_newtrunc(int rw, struct kiocb *iocb, struct inode *inode,
struct block_device *bdev, const struct iovec *iov, loff_t offset,
unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
- int flags)
+ dio_submit_t submit_io, int flags)
{
int seg;
size_t size;
@@ -1197,11 +1225,49 @@
(end > i_size_read(inode)));
retval = direct_io_worker(rw, iocb, inode, iov, offset,
- nr_segs, blkbits, get_block, end_io, dio);
+ nr_segs, blkbits, get_block, end_io,
+ submit_io, dio);
+out:
+ return retval;
+}
+EXPORT_SYMBOL(__blockdev_direct_IO_newtrunc);
+
+/*
+ * This is a library function for use by filesystem drivers.
+ *
+ * The locking rules are governed by the flags parameter:
+ * - if the flags value contains DIO_LOCKING we use a fancy locking
+ * scheme for dumb filesystems.
+ * For writes this function is called under i_mutex and returns with
+ * i_mutex held, for reads, i_mutex is not held on entry, but it is
+ * taken and dropped again before returning.
+ * For reads and writes i_alloc_sem is taken in shared mode and released
+ * on I/O completion (which may happen asynchronously after returning to
+ * the caller).
+ *
+ * - if the flags value does NOT contain DIO_LOCKING we don't use any
+ * internal locking but rather rely on the filesystem to synchronize
+ * direct I/O reads/writes versus each other and truncate.
+ * For reads and writes both i_mutex and i_alloc_sem are not held on
+ * entry and are never taken.
+ */
+ssize_t
+__blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
+ struct block_device *bdev, const struct iovec *iov, loff_t offset,
+ unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
+ dio_submit_t submit_io, int flags)
+{
+ ssize_t retval;
+
+ retval = __blockdev_direct_IO_newtrunc(rw, iocb, inode, bdev, iov,
+ offset, nr_segs, get_block, end_io, submit_io, flags);
/*
* In case of error extending write may have instantiated a few
* blocks outside i_size. Trim these off again for DIO_LOCKING.
+ * NOTE: DIO_NO_LOCK/DIO_OWN_LOCK callers have to handle this in
+ * their own manner. This is a further example of where the old
+ * truncate sequence is inadequate.
*
* NOTE: filesystems with their own locking have to handle this
* on their own.
@@ -1209,12 +1275,13 @@
if (flags & DIO_LOCKING) {
if (unlikely((rw & WRITE) && retval < 0)) {
loff_t isize = i_size_read(inode);
+ loff_t end = offset + iov_length(iov, nr_segs);
+
if (end > isize)
vmtruncate(inode, isize);
}
}
-out:
return retval;
}
EXPORT_SYMBOL(__blockdev_direct_IO);
diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c
index 3bdddbc..e8fcf4e 100644
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -274,7 +274,7 @@
}
static int
-ecryptfs_fsync(struct file *file, struct dentry *dentry, int datasync)
+ecryptfs_fsync(struct file *file, int datasync)
{
return vfs_fsync(ecryptfs_file_to_lower(file), datasync);
}
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 65dee2f..31ef525 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -805,7 +805,7 @@
- (ia->ia_size & ~PAGE_CACHE_MASK));
if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
- rc = vmtruncate(inode, ia->ia_size);
+ rc = simple_setsize(inode, ia->ia_size);
if (rc)
goto out;
lower_ia->ia_size = ia->ia_size;
@@ -830,7 +830,7 @@
goto out;
}
}
- vmtruncate(inode, ia->ia_size);
+ simple_setsize(inode, ia->ia_size);
rc = ecryptfs_write_inode_size_to_metadata(inode);
if (rc) {
printk(KERN_ERR "Problem with "
diff --git a/fs/exec.c b/fs/exec.c
index 9badbc0..e19de6a 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -768,7 +768,6 @@
struct signal_struct *sig = tsk->signal;
struct sighand_struct *oldsighand = tsk->sighand;
spinlock_t *lock = &oldsighand->siglock;
- int count;
if (thread_group_empty(tsk))
goto no_thread_group;
@@ -785,13 +784,13 @@
spin_unlock_irq(lock);
return -EAGAIN;
}
- sig->group_exit_task = tsk;
- zap_other_threads(tsk);
- /* Account for the thread group leader hanging around: */
- count = thread_group_leader(tsk) ? 1 : 2;
- sig->notify_count = count;
- while (atomic_read(&sig->count) > count) {
+ sig->group_exit_task = tsk;
+ sig->notify_count = zap_other_threads(tsk);
+ if (!thread_group_leader(tsk))
+ sig->notify_count--;
+
+ while (sig->notify_count) {
__set_current_state(TASK_UNINTERRUPTIBLE);
spin_unlock_irq(lock);
schedule();
@@ -1662,12 +1661,15 @@
struct task_struct *tsk = current;
struct mm_struct *mm = tsk->mm;
struct completion *vfork_done;
- int core_waiters;
+ int core_waiters = -EBUSY;
init_completion(&core_state->startup);
core_state->dumper.task = tsk;
core_state->dumper.next = NULL;
- core_waiters = zap_threads(tsk, mm, core_state, exit_code);
+
+ down_write(&mm->mmap_sem);
+ if (!mm->core_state)
+ core_waiters = zap_threads(tsk, mm, core_state, exit_code);
up_write(&mm->mmap_sem);
if (unlikely(core_waiters < 0))
@@ -1787,21 +1789,61 @@
}
+/*
+ * uhm_pipe_setup
+ * helper function to customize the process used
+ * to collect the core in userspace. Specifically
+ * it sets up a pipe and installs it as fd 0 (stdin)
+ * for the process. Returns 0 on success, or
+ * PTR_ERR on failure.
+ * Note that it also sets the core limit to 1. This
+ * is a special value that we use to trap recursive
+ * core dumps
+ */
+static int umh_pipe_setup(struct subprocess_info *info)
+{
+ struct file *rp, *wp;
+ struct fdtable *fdt;
+ struct coredump_params *cp = (struct coredump_params *)info->data;
+ struct files_struct *cf = current->files;
+
+ wp = create_write_pipe(0);
+ if (IS_ERR(wp))
+ return PTR_ERR(wp);
+
+ rp = create_read_pipe(wp, 0);
+ if (IS_ERR(rp)) {
+ free_write_pipe(wp);
+ return PTR_ERR(rp);
+ }
+
+ cp->file = wp;
+
+ sys_close(0);
+ fd_install(0, rp);
+ spin_lock(&cf->file_lock);
+ fdt = files_fdtable(cf);
+ FD_SET(0, fdt->open_fds);
+ FD_CLR(0, fdt->close_on_exec);
+ spin_unlock(&cf->file_lock);
+
+ /* and disallow core files too */
+ current->signal->rlim[RLIMIT_CORE] = (struct rlimit){1, 1};
+
+ return 0;
+}
+
void do_coredump(long signr, int exit_code, struct pt_regs *regs)
{
struct core_state core_state;
char corename[CORENAME_MAX_SIZE + 1];
struct mm_struct *mm = current->mm;
struct linux_binfmt * binfmt;
- struct inode * inode;
const struct cred *old_cred;
struct cred *cred;
int retval = 0;
int flag = 0;
- int ispipe = 0;
- char **helper_argv = NULL;
- int helper_argc = 0;
- int dump_count = 0;
+ int ispipe;
static atomic_t core_dump_count = ATOMIC_INIT(0);
struct coredump_params cprm = {
.signr = signr,
@@ -1820,23 +1862,12 @@
binfmt = mm->binfmt;
if (!binfmt || !binfmt->core_dump)
goto fail;
+ if (!__get_dumpable(cprm.mm_flags))
+ goto fail;
cred = prepare_creds();
- if (!cred) {
- retval = -ENOMEM;
+ if (!cred)
goto fail;
- }
-
- down_write(&mm->mmap_sem);
- /*
- * If another thread got here first, or we are not dumpable, bail out.
- */
- if (mm->core_state || !__get_dumpable(cprm.mm_flags)) {
- up_write(&mm->mmap_sem);
- put_cred(cred);
- goto fail;
- }
-
/*
* We cannot trust fsuid as being the "true" uid of the
* process nor do we know its entire history. We only know it
@@ -1849,10 +1880,8 @@
}
retval = coredump_wait(exit_code, &core_state);
- if (retval < 0) {
- put_cred(cred);
- goto fail;
- }
+ if (retval < 0)
+ goto fail_creds;
old_cred = override_creds(cred);
@@ -1870,19 +1899,19 @@
ispipe = format_corename(corename, signr);
unlock_kernel();
- if ((!ispipe) && (cprm.limit < binfmt->min_coredump))
- goto fail_unlock;
-
if (ispipe) {
- if (cprm.limit == 0) {
+ int dump_count;
+ char **helper_argv;
+
+ if (cprm.limit == 1) {
/*
* Normally core limits are irrelevant to pipes, since
* we're not writing to the file system, but we use
- * cprm.limit of 0 here as a speacial value. Any
- * non-zero limit gets set to RLIM_INFINITY below, but
+ * cprm.limit of 1 here as a speacial value. Any
+ * non-1 limit gets set to RLIM_INFINITY below, but
* a limit of 0 skips the dump. This is a consistent
* way to catch recursive crashes. We can still crash
- * if the core_pattern binary sets RLIM_CORE = !0
+ * if the core_pattern binary sets RLIM_CORE = !1
* but it runs as root, and can do lots of stupid things
* Note that we use task_tgid_vnr here to grab the pid
* of the process group leader. That way we get the
@@ -1890,11 +1919,12 @@
* core_pattern process dies.
*/
printk(KERN_WARNING
- "Process %d(%s) has RLIMIT_CORE set to 0\n",
+ "Process %d(%s) has RLIMIT_CORE set to 1\n",
task_tgid_vnr(current), current->comm);
printk(KERN_WARNING "Aborting core\n");
goto fail_unlock;
}
+ cprm.limit = RLIM_INFINITY;
dump_count = atomic_inc_return(&core_dump_count);
if (core_pipe_limit && (core_pipe_limit < dump_count)) {
@@ -1904,71 +1934,74 @@
goto fail_dropcount;
}
- helper_argv = argv_split(GFP_KERNEL, corename+1, &helper_argc);
+ helper_argv = argv_split(GFP_KERNEL, corename+1, NULL);
if (!helper_argv) {
printk(KERN_WARNING "%s failed to allocate memory\n",
__func__);
goto fail_dropcount;
}
- cprm.limit = RLIM_INFINITY;
-
- /* SIGPIPE can happen, but it's just never processed */
- if (call_usermodehelper_pipe(helper_argv[0], helper_argv, NULL,
- &cprm.file)) {
+ retval = call_usermodehelper_fns(helper_argv[0], helper_argv,
+ NULL, UMH_WAIT_EXEC, umh_pipe_setup,
+ NULL, &cprm);
+ argv_free(helper_argv);
+ if (retval) {
printk(KERN_INFO "Core dump to %s pipe failed\n",
corename);
- goto fail_dropcount;
+ goto close_fail;
}
- } else
+ } else {
+ struct inode *inode;
+
+ if (cprm.limit < binfmt->min_coredump)
+ goto fail_unlock;
+
cprm.file = filp_open(corename,
O_CREAT | 2 | O_NOFOLLOW | O_LARGEFILE | flag,
0600);
- if (IS_ERR(cprm.file))
- goto fail_dropcount;
- inode = cprm.file->f_path.dentry->d_inode;
- if (inode->i_nlink > 1)
- goto close_fail; /* multiple links - don't dump */
- if (!ispipe && d_unhashed(cprm.file->f_path.dentry))
- goto close_fail;
+ if (IS_ERR(cprm.file))
+ goto fail_unlock;
- /* AK: actually i see no reason to not allow this for named pipes etc.,
- but keep the previous behaviour for now. */
- if (!ispipe && !S_ISREG(inode->i_mode))
- goto close_fail;
- /*
- * Dont allow local users get cute and trick others to coredump
- * into their pre-created files:
- * Note, this is not relevant for pipes
- */
- if (!ispipe && (inode->i_uid != current_fsuid()))
- goto close_fail;
- if (!cprm.file->f_op)
- goto close_fail;
- if (!cprm.file->f_op->write)
- goto close_fail;
- if (!ispipe &&
- do_truncate(cprm.file->f_path.dentry, 0, 0, cprm.file) != 0)
- goto close_fail;
+ inode = cprm.file->f_path.dentry->d_inode;
+ if (inode->i_nlink > 1)
+ goto close_fail;
+ if (d_unhashed(cprm.file->f_path.dentry))
+ goto close_fail;
+ /*
+ * AK: actually i see no reason to not allow this for named
+ * pipes etc, but keep the previous behaviour for now.
+ */
+ if (!S_ISREG(inode->i_mode))
+ goto close_fail;
+ /*
+ * Dont allow local users get cute and trick others to coredump
+ * into their pre-created files.
+ */
+ if (inode->i_uid != current_fsuid())
+ goto close_fail;
+ if (!cprm.file->f_op || !cprm.file->f_op->write)
+ goto close_fail;
+ if (do_truncate(cprm.file->f_path.dentry, 0, 0, cprm.file))
+ goto close_fail;
+ }
retval = binfmt->core_dump(&cprm);
-
if (retval)
current->signal->group_exit_code |= 0x80;
-close_fail:
+
if (ispipe && core_pipe_limit)
wait_for_dump_helpers(cprm.file);
- filp_close(cprm.file, NULL);
+close_fail:
+ if (cprm.file)
+ filp_close(cprm.file, NULL);
fail_dropcount:
- if (dump_count)
+ if (ispipe)
atomic_dec(&core_dump_count);
fail_unlock:
- if (helper_argv)
- argv_free(helper_argv);
-
- revert_creds(old_cred);
- put_cred(cred);
coredump_finish(mm);
+ revert_creds(old_cred);
+fail_creds:
+ put_cred(cred);
fail:
return;
}
diff --git a/fs/exofs/file.c b/fs/exofs/file.c
index 839b9dc..fef6899 100644
--- a/fs/exofs/file.c
+++ b/fs/exofs/file.c
@@ -40,12 +40,11 @@
return 0;
}
-static int exofs_file_fsync(struct file *filp, struct dentry *dentry,
- int datasync)
+static int exofs_file_fsync(struct file *filp, int datasync)
{
int ret;
struct address_space *mapping = filp->f_mapping;
- struct inode *inode = dentry->d_inode;
+ struct inode *inode = mapping->host;
struct super_block *sb;
ret = filemap_write_and_wait(mapping);
@@ -66,7 +65,7 @@
static int exofs_flush(struct file *file, fl_owner_t id)
{
- exofs_file_fsync(file, file->f_path.dentry, 1);
+ exofs_file_fsync(file, 1);
/* TODO: Flush the OSD target */
return 0;
}
diff --git a/fs/ext2/acl.c b/fs/ext2/acl.c
index ca7e2a0..2bcc043 100644
--- a/fs/ext2/acl.c
+++ b/fs/ext2/acl.c
@@ -200,6 +200,7 @@
return error;
else {
inode->i_mode = mode;
+ inode->i_ctime = CURRENT_TIME_SEC;
mark_inode_dirty(inode);
if (error == 0)
acl = NULL;
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index 0b038e4..52b34f1 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -122,7 +122,6 @@
extern void ext2_delete_inode (struct inode *);
extern int ext2_sync_inode (struct inode *);
extern int ext2_get_block(struct inode *, sector_t, struct buffer_head *, int);
-extern void ext2_truncate (struct inode *);
extern int ext2_setattr (struct dentry *, struct iattr *);
extern void ext2_set_inode_flags(struct inode *inode);
extern void ext2_get_inode_flags(struct ext2_inode_info *);
@@ -155,7 +154,7 @@
extern const struct file_operations ext2_dir_operations;
/* file.c */
-extern int ext2_fsync(struct file *file, struct dentry *dentry, int datasync);
+extern int ext2_fsync(struct file *file, int datasync);
extern const struct inode_operations ext2_file_inode_operations;
extern const struct file_operations ext2_file_operations;
extern const struct file_operations ext2_xip_file_operations;
diff --git a/fs/ext2/file.c b/fs/ext2/file.c
index 5d198d0..49eec94 100644
--- a/fs/ext2/file.c
+++ b/fs/ext2/file.c
@@ -40,13 +40,13 @@
return 0;
}
-int ext2_fsync(struct file *file, struct dentry *dentry, int datasync)
+int ext2_fsync(struct file *file, int datasync)
{
int ret;
- struct super_block *sb = dentry->d_inode->i_sb;
+ struct super_block *sb = file->f_mapping->host->i_sb;
struct address_space *mapping = sb->s_bdev->bd_inode->i_mapping;
- ret = simple_fsync(file, dentry, datasync);
+ ret = generic_file_fsync(file, datasync);
if (ret == -EIO || test_and_clear_bit(AS_EIO, &mapping->flags)) {
/* We don't really know where the IO error happened... */
ext2_error(sb, __func__,
@@ -95,7 +95,6 @@
#endif
const struct inode_operations ext2_file_inode_operations = {
- .truncate = ext2_truncate,
#ifdef CONFIG_EXT2_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index 527c46d..3675088 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -54,6 +54,18 @@
inode->i_blocks - ea_blocks == 0);
}
+static void ext2_truncate_blocks(struct inode *inode, loff_t offset);
+
+static void ext2_write_failed(struct address_space *mapping, loff_t to)
+{
+ struct inode *inode = mapping->host;
+
+ if (to > inode->i_size) {
+ truncate_pagecache(inode, to, inode->i_size);
+ ext2_truncate_blocks(inode, inode->i_size);
+ }
+}
+
/*
* Called at the last iput() if i_nlink is zero.
*/
@@ -71,7 +83,7 @@
inode->i_size = 0;
if (inode->i_blocks)
- ext2_truncate (inode);
+ ext2_truncate_blocks(inode, 0);
ext2_free_inode (inode);
return;
@@ -757,8 +769,8 @@
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
- return block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- ext2_get_block);
+ return block_write_begin_newtrunc(file, mapping, pos, len, flags,
+ pagep, fsdata, ext2_get_block);
}
static int
@@ -766,8 +778,25 @@
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
+ int ret;
+
*pagep = NULL;
- return __ext2_write_begin(file, mapping, pos, len, flags, pagep,fsdata);
+ ret = __ext2_write_begin(file, mapping, pos, len, flags, pagep, fsdata);
+ if (ret < 0)
+ ext2_write_failed(mapping, pos + len);
+ return ret;
+}
+
+static int ext2_write_end(struct file *file, struct address_space *mapping,
+ loff_t pos, unsigned len, unsigned copied,
+ struct page *page, void *fsdata)
+{
+ int ret;
+
+ ret = generic_write_end(file, mapping, pos, len, copied, page, fsdata);
+ if (ret < len)
+ ext2_write_failed(mapping, pos + len);
+ return ret;
}
static int
@@ -775,13 +804,18 @@
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
+ int ret;
+
/*
* Dir-in-pagecache still uses ext2_write_begin. Would have to rework
* directory handling code to pass around offsets rather than struct
* pages in order to make this work easily.
*/
- return nobh_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- ext2_get_block);
+ ret = nobh_write_begin_newtrunc(file, mapping, pos, len, flags, pagep,
+ fsdata, ext2_get_block);
+ if (ret < 0)
+ ext2_write_failed(mapping, pos + len);
+ return ret;
}
static int ext2_nobh_writepage(struct page *page,
@@ -800,10 +834,15 @@
loff_t offset, unsigned long nr_segs)
{
struct file *file = iocb->ki_filp;
- struct inode *inode = file->f_mapping->host;
+ struct address_space *mapping = file->f_mapping;
+ struct inode *inode = mapping->host;
+ ssize_t ret;
- return blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
- offset, nr_segs, ext2_get_block, NULL);
+ ret = blockdev_direct_IO_newtrunc(rw, iocb, inode, inode->i_sb->s_bdev,
+ iov, offset, nr_segs, ext2_get_block, NULL);
+ if (ret < 0 && (rw & WRITE))
+ ext2_write_failed(mapping, offset + iov_length(iov, nr_segs));
+ return ret;
}
static int
@@ -818,7 +857,7 @@
.writepage = ext2_writepage,
.sync_page = block_sync_page,
.write_begin = ext2_write_begin,
- .write_end = generic_write_end,
+ .write_end = ext2_write_end,
.bmap = ext2_bmap,
.direct_IO = ext2_direct_IO,
.writepages = ext2_writepages,
@@ -1027,7 +1066,7 @@
ext2_free_data(inode, p, q);
}
-void ext2_truncate(struct inode *inode)
+static void __ext2_truncate_blocks(struct inode *inode, loff_t offset)
{
__le32 *i_data = EXT2_I(inode)->i_data;
struct ext2_inode_info *ei = EXT2_I(inode);
@@ -1039,27 +1078,8 @@
int n;
long iblock;
unsigned blocksize;
-
- if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
- S_ISLNK(inode->i_mode)))
- return;
- if (ext2_inode_is_fast_symlink(inode))
- return;
- if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
- return;
-
blocksize = inode->i_sb->s_blocksize;
- iblock = (inode->i_size + blocksize-1)
- >> EXT2_BLOCK_SIZE_BITS(inode->i_sb);
-
- if (mapping_is_xip(inode->i_mapping))
- xip_truncate_page(inode->i_mapping, inode->i_size);
- else if (test_opt(inode->i_sb, NOBH))
- nobh_truncate_page(inode->i_mapping,
- inode->i_size, ext2_get_block);
- else
- block_truncate_page(inode->i_mapping,
- inode->i_size, ext2_get_block);
+ iblock = (offset + blocksize-1) >> EXT2_BLOCK_SIZE_BITS(inode->i_sb);
n = ext2_block_to_path(inode, iblock, offsets, NULL);
if (n == 0)
@@ -1127,6 +1147,62 @@
ext2_discard_reservation(inode);
mutex_unlock(&ei->truncate_mutex);
+}
+
+static void ext2_truncate_blocks(struct inode *inode, loff_t offset)
+{
+ /*
+ * XXX: it seems like a bug here that we don't allow
+ * IS_APPEND inode to have blocks-past-i_size trimmed off.
+ * review and fix this.
+ *
+ * Also would be nice to be able to handle IO errors and such,
+ * but that's probably too much to ask.
+ */
+ if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
+ S_ISLNK(inode->i_mode)))
+ return;
+ if (ext2_inode_is_fast_symlink(inode))
+ return;
+ if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
+ return;
+ __ext2_truncate_blocks(inode, offset);
+}
+
+int ext2_setsize(struct inode *inode, loff_t newsize)
+{
+ loff_t oldsize;
+ int error;
+
+ error = inode_newsize_ok(inode, newsize);
+ if (error)
+ return error;
+
+ if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
+ S_ISLNK(inode->i_mode)))
+ return -EINVAL;
+ if (ext2_inode_is_fast_symlink(inode))
+ return -EINVAL;
+ if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
+ return -EPERM;
+
+ if (mapping_is_xip(inode->i_mapping))
+ error = xip_truncate_page(inode->i_mapping, newsize);
+ else if (test_opt(inode->i_sb, NOBH))
+ error = nobh_truncate_page(inode->i_mapping,
+ newsize, ext2_get_block);
+ else
+ error = block_truncate_page(inode->i_mapping,
+ newsize, ext2_get_block);
+ if (error)
+ return error;
+
+ oldsize = inode->i_size;
+ i_size_write(inode, newsize);
+ truncate_pagecache(inode, oldsize, newsize);
+
+ __ext2_truncate_blocks(inode, newsize);
+
inode->i_mtime = inode->i_ctime = CURRENT_TIME_SEC;
if (inode_needs_sync(inode)) {
sync_mapping_buffers(inode->i_mapping);
@@ -1134,6 +1210,8 @@
} else {
mark_inode_dirty(inode);
}
+
+ return 0;
}
static struct ext2_inode *ext2_get_inode(struct super_block *sb, ino_t ino,
@@ -1474,8 +1552,15 @@
if (error)
return error;
}
- error = inode_setattr(inode, iattr);
- if (!error && (iattr->ia_valid & ATTR_MODE))
+ if (iattr->ia_valid & ATTR_SIZE && iattr->ia_size != inode->i_size) {
+ error = ext2_setsize(inode, iattr->ia_size);
+ if (error)
+ return error;
+ }
+ generic_setattr(inode, iattr);
+ if (iattr->ia_valid & ATTR_MODE)
error = ext2_acl_chmod(inode);
+ mark_inode_dirty(inode);
+
return error;
}
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index 71e9eb1..7ff43f4 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -119,6 +119,8 @@
int i;
struct ext2_sb_info *sbi = EXT2_SB(sb);
+ dquot_disable(sb, -1, DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED);
+
if (sb->s_dirt)
ext2_write_super(sb);
@@ -1063,6 +1065,12 @@
sb->s_op = &ext2_sops;
sb->s_export_op = &ext2_export_ops;
sb->s_xattr = ext2_xattr_handlers;
+
+#ifdef CONFIG_QUOTA
+ sb->dq_op = &dquot_operations;
+ sb->s_qcop = &dquot_quotactl_ops;
+#endif
+
root = ext2_iget(sb, EXT2_ROOT_INO);
if (IS_ERR(root)) {
ret = PTR_ERR(root);
@@ -1241,6 +1249,7 @@
spin_unlock(&sbi->s_lock);
return 0;
}
+
/*
* OK, we are remounting a valid rw partition rdonly, so set
* the rdonly flag and then mark the partition as valid again.
@@ -1248,6 +1257,13 @@
es->s_state = cpu_to_le16(sbi->s_mount_state);
es->s_mtime = cpu_to_le32(get_seconds());
spin_unlock(&sbi->s_lock);
+
+ err = dquot_suspend(sb, -1);
+ if (err < 0) {
+ spin_lock(&sbi->s_lock);
+ goto restore_opts;
+ }
+
ext2_sync_super(sb, es, 1);
} else {
__le32 ret = EXT2_HAS_RO_COMPAT_FEATURE(sb,
@@ -1269,8 +1285,12 @@
if (!ext2_setup_super (sb, es, 0))
sb->s_flags &= ~MS_RDONLY;
spin_unlock(&sbi->s_lock);
+
ext2_write_super(sb);
+
+ dquot_resume(sb, -1);
}
+
return 0;
restore_opts:
sbi->s_mount_opt = old_opts.s_mount_opt;
diff --git a/fs/ext3/acl.c b/fs/ext3/acl.c
index 01552ab..8a11fe2 100644
--- a/fs/ext3/acl.c
+++ b/fs/ext3/acl.c
@@ -205,6 +205,7 @@
return error;
else {
inode->i_mode = mode;
+ inode->i_ctime = CURRENT_TIME_SEC;
ext3_mark_inode_dirty(handle, inode);
if (error == 0)
acl = NULL;
diff --git a/fs/ext3/dir.c b/fs/ext3/dir.c
index 373fa90..e2e72c3 100644
--- a/fs/ext3/dir.c
+++ b/fs/ext3/dir.c
@@ -297,7 +297,7 @@
kfree (old);
}
if (!parent)
- root->rb_node = NULL;
+ *root = RB_ROOT;
else if (parent->rb_left == n)
parent->rb_left = NULL;
else if (parent->rb_right == n)
diff --git a/fs/ext3/fsync.c b/fs/ext3/fsync.c
index fcf7487..d7e9f74 100644
--- a/fs/ext3/fsync.c
+++ b/fs/ext3/fsync.c
@@ -43,9 +43,9 @@
* inode to disk.
*/
-int ext3_sync_file(struct file * file, struct dentry *dentry, int datasync)
+int ext3_sync_file(struct file *file, int datasync)
{
- struct inode *inode = dentry->d_inode;
+ struct inode *inode = file->f_mapping->host;
struct ext3_inode_info *ei = EXT3_I(inode);
journal_t *journal = EXT3_SB(inode->i_sb)->s_journal;
int ret, needs_barrier = 0;
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 0fc1293..6c953bb 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -410,6 +410,8 @@
struct ext3_super_block *es = sbi->s_es;
int i, err;
+ dquot_disable(sb, -1, DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED);
+
lock_kernel();
ext3_xattr_put_super(sb);
@@ -748,7 +750,7 @@
static int ext3_mark_dquot_dirty(struct dquot *dquot);
static int ext3_write_info(struct super_block *sb, int type);
static int ext3_quota_on(struct super_block *sb, int type, int format_id,
- char *path, int remount);
+ char *path);
static int ext3_quota_on_mount(struct super_block *sb, int type);
static ssize_t ext3_quota_read(struct super_block *sb, int type, char *data,
size_t len, loff_t off);
@@ -767,12 +769,12 @@
static const struct quotactl_ops ext3_qctl_operations = {
.quota_on = ext3_quota_on,
- .quota_off = vfs_quota_off,
- .quota_sync = vfs_quota_sync,
- .get_info = vfs_get_dqinfo,
- .set_info = vfs_set_dqinfo,
- .get_dqblk = vfs_get_dqblk,
- .set_dqblk = vfs_set_dqblk
+ .quota_off = dquot_quota_off,
+ .quota_sync = dquot_quota_sync,
+ .get_info = dquot_get_dqinfo,
+ .set_info = dquot_set_dqinfo,
+ .get_dqblk = dquot_get_dqblk,
+ .set_dqblk = dquot_set_dqblk
};
#endif
@@ -1527,7 +1529,7 @@
/* Turn quotas off */
for (i = 0; i < MAXQUOTAS; i++) {
if (sb_dqopt(sb)->files[i])
- vfs_quota_off(sb, i, 0);
+ dquot_quota_off(sb, i);
}
#endif
sb->s_flags = s_flags; /* Restore MS_RDONLY status */
@@ -2551,6 +2553,7 @@
ext3_fsblk_t n_blocks_count = 0;
unsigned long old_sb_flags;
struct ext3_mount_options old_opts;
+ int enable_quota = 0;
int err;
#ifdef CONFIG_QUOTA
int i;
@@ -2597,6 +2600,10 @@
}
if (*flags & MS_RDONLY) {
+ err = dquot_suspend(sb, -1);
+ if (err < 0)
+ goto restore_opts;
+
/*
* First of all, the unconditional stuff we have to do
* to disable replay of the journal when we next remount
@@ -2651,6 +2658,7 @@
goto restore_opts;
if (!ext3_setup_super (sb, es, 0))
sb->s_flags &= ~MS_RDONLY;
+ enable_quota = 1;
}
}
#ifdef CONFIG_QUOTA
@@ -2662,6 +2670,9 @@
#endif
unlock_super(sb);
unlock_kernel();
+
+ if (enable_quota)
+ dquot_resume(sb, -1);
return 0;
restore_opts:
sb->s_flags = old_sb_flags;
@@ -2851,24 +2862,21 @@
*/
static int ext3_quota_on_mount(struct super_block *sb, int type)
{
- return vfs_quota_on_mount(sb, EXT3_SB(sb)->s_qf_names[type],
- EXT3_SB(sb)->s_jquota_fmt, type);
+ return dquot_quota_on_mount(sb, EXT3_SB(sb)->s_qf_names[type],
+ EXT3_SB(sb)->s_jquota_fmt, type);
}
/*
* Standard function to be called on quota_on
*/
static int ext3_quota_on(struct super_block *sb, int type, int format_id,
- char *name, int remount)
+ char *name)
{
int err;
struct path path;
if (!test_opt(sb, QUOTA))
return -EINVAL;
- /* When remounting, no checks are needed and in fact, name is NULL */
- if (remount)
- return vfs_quota_on(sb, type, format_id, name, remount);
err = kern_path(name, LOOKUP_FOLLOW, &path);
if (err)
@@ -2906,7 +2914,7 @@
}
}
- err = vfs_quota_on_path(sb, type, format_id, &path);
+ err = dquot_quota_on_path(sb, type, format_id, &path);
path_put(&path);
return err;
}
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index d2f37a5..95b7594 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -591,14 +591,15 @@
ret = ext4_mb_new_blocks(handle, &ar, errp);
if (count)
*count = ar.len;
-
/*
- * Account for the allocated meta blocks
+ * Account for the allocated meta blocks. We will never
+ * fail EDQUOT for metdata, but we do account for it.
*/
if (!(*errp) && EXT4_I(inode)->i_delalloc_reserved_flag) {
spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
EXT4_I(inode)->i_allocated_meta_blocks += ar.len;
spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
+ dquot_alloc_block_nofail(inode, ar.len);
}
return ret;
}
diff --git a/fs/ext4/block_validity.c b/fs/ext4/block_validity.c
index 538c486..5b6973f 100644
--- a/fs/ext4/block_validity.c
+++ b/fs/ext4/block_validity.c
@@ -72,9 +72,9 @@
else if (start_blk >= (entry->start_blk + entry->count))
n = &(*n)->rb_right;
else {
- if (start_blk + count > (entry->start_blk +
+ if (start_blk + count > (entry->start_blk +
entry->count))
- entry->count = (start_blk + count -
+ entry->count = (start_blk + count -
entry->start_blk);
new_node = *n;
new_entry = rb_entry(new_node, struct ext4_system_zone,
diff --git a/fs/ext4/dir.c b/fs/ext4/dir.c
index 86cb6d8..ea5e6cb 100644
--- a/fs/ext4/dir.c
+++ b/fs/ext4/dir.c
@@ -83,11 +83,10 @@
error_msg = "inode out of bounds";
if (error_msg != NULL)
- __ext4_error(dir->i_sb, function,
- "bad entry in directory #%lu: %s - block=%llu"
+ ext4_error_inode(function, dir,
+ "bad entry in directory: %s - block=%llu"
"offset=%u(%u), inode=%u, rec_len=%d, name_len=%d",
- dir->i_ino, error_msg,
- (unsigned long long) bh->b_blocknr,
+ error_msg, (unsigned long long) bh->b_blocknr,
(unsigned) (offset%bh->b_size), offset,
le32_to_cpu(de->inode),
rlen, de->name_len);
@@ -111,7 +110,7 @@
if (EXT4_HAS_COMPAT_FEATURE(inode->i_sb,
EXT4_FEATURE_COMPAT_DIR_INDEX) &&
- ((EXT4_I(inode)->i_flags & EXT4_INDEX_FL) ||
+ ((ext4_test_inode_flag(inode, EXT4_INODE_INDEX)) ||
((inode->i_size >> sb->s_blocksize_bits) == 1))) {
err = ext4_dx_readdir(filp, dirent, filldir);
if (err != ERR_BAD_DX_DIR) {
@@ -122,20 +121,20 @@
* We don't set the inode dirty flag since it's not
* critical that it get flushed back to the disk.
*/
- EXT4_I(filp->f_path.dentry->d_inode)->i_flags &= ~EXT4_INDEX_FL;
+ ext4_clear_inode_flag(filp->f_path.dentry->d_inode, EXT4_INODE_INDEX);
}
stored = 0;
offset = filp->f_pos & (sb->s_blocksize - 1);
while (!error && !stored && filp->f_pos < inode->i_size) {
- ext4_lblk_t blk = filp->f_pos >> EXT4_BLOCK_SIZE_BITS(sb);
- struct buffer_head map_bh;
+ struct ext4_map_blocks map;
struct buffer_head *bh = NULL;
- map_bh.b_state = 0;
- err = ext4_get_blocks(NULL, inode, blk, 1, &map_bh, 0);
+ map.m_lblk = filp->f_pos >> EXT4_BLOCK_SIZE_BITS(sb);
+ map.m_len = 1;
+ err = ext4_map_blocks(NULL, inode, &map, 0);
if (err > 0) {
- pgoff_t index = map_bh.b_blocknr >>
+ pgoff_t index = map.m_pblk >>
(PAGE_CACHE_SHIFT - inode->i_blkbits);
if (!ra_has_index(&filp->f_ra, index))
page_cache_sync_readahead(
@@ -143,7 +142,7 @@
&filp->f_ra, filp,
index, 1);
filp->f_ra.prev_pos = (loff_t)index << PAGE_CACHE_SHIFT;
- bh = ext4_bread(NULL, inode, blk, 0, &err);
+ bh = ext4_bread(NULL, inode, map.m_lblk, 0, &err);
}
/*
@@ -152,9 +151,8 @@
*/
if (!bh) {
if (!dir_has_error) {
- ext4_error(sb, "directory #%lu "
+ EXT4_ERROR_INODE(inode, "directory "
"contains a hole at offset %Lu",
- inode->i_ino,
(unsigned long long) filp->f_pos);
dir_has_error = 1;
}
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index bf938cf..19a4de5 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -29,6 +29,9 @@
#include <linux/wait.h>
#include <linux/blockgroup_lock.h>
#include <linux/percpu_counter.h>
+#ifdef __KERNEL__
+#include <linux/compat.h>
+#endif
/*
* The fourth extended filesystem constants/structures
@@ -54,10 +57,10 @@
#endif
#define EXT4_ERROR_INODE(inode, fmt, a...) \
- ext4_error_inode(__func__, (inode), (fmt), ## a);
+ ext4_error_inode(__func__, (inode), (fmt), ## a)
#define EXT4_ERROR_FILE(file, fmt, a...) \
- ext4_error_file(__func__, (file), (fmt), ## a);
+ ext4_error_file(__func__, (file), (fmt), ## a)
/* data type for block offset of block group */
typedef int ext4_grpblk_t;
@@ -72,7 +75,7 @@
typedef unsigned int ext4_group_t;
/*
- * Flags used in mballoc's allocation_context flags field.
+ * Flags used in mballoc's allocation_context flags field.
*
* Also used to show what's going on for debugging purposes when the
* flag field is exported via the traceport interface
@@ -126,6 +129,29 @@
};
/*
+ * Logical to physical block mapping, used by ext4_map_blocks()
+ *
+ * This structure is used to pass requests into ext4_map_blocks() as
+ * well as to store the information returned by ext4_map_blocks(). It
+ * takes less room on the stack than a struct buffer_head.
+ */
+#define EXT4_MAP_NEW (1 << BH_New)
+#define EXT4_MAP_MAPPED (1 << BH_Mapped)
+#define EXT4_MAP_UNWRITTEN (1 << BH_Unwritten)
+#define EXT4_MAP_BOUNDARY (1 << BH_Boundary)
+#define EXT4_MAP_UNINIT (1 << BH_Uninit)
+#define EXT4_MAP_FLAGS (EXT4_MAP_NEW | EXT4_MAP_MAPPED |\
+ EXT4_MAP_UNWRITTEN | EXT4_MAP_BOUNDARY |\
+ EXT4_MAP_UNINIT)
+
+struct ext4_map_blocks {
+ ext4_fsblk_t m_pblk;
+ ext4_lblk_t m_lblk;
+ unsigned int m_len;
+ unsigned int m_flags;
+};
+
+/*
* For delayed allocation tracking
*/
struct mpage_da_data {
@@ -321,6 +347,83 @@
return flags & EXT4_OTHER_FLMASK;
}
+/*
+ * Inode flags used for atomic set/get
+ */
+enum {
+ EXT4_INODE_SECRM = 0, /* Secure deletion */
+ EXT4_INODE_UNRM = 1, /* Undelete */
+ EXT4_INODE_COMPR = 2, /* Compress file */
+ EXT4_INODE_SYNC = 3, /* Synchronous updates */
+ EXT4_INODE_IMMUTABLE = 4, /* Immutable file */
+ EXT4_INODE_APPEND = 5, /* writes to file may only append */
+ EXT4_INODE_NODUMP = 6, /* do not dump file */
+ EXT4_INODE_NOATIME = 7, /* do not update atime */
+/* Reserved for compression usage... */
+ EXT4_INODE_DIRTY = 8,
+ EXT4_INODE_COMPRBLK = 9, /* One or more compressed clusters */
+ EXT4_INODE_NOCOMPR = 10, /* Don't compress */
+ EXT4_INODE_ECOMPR = 11, /* Compression error */
+/* End compression flags --- maybe not all used */
+ EXT4_INODE_INDEX = 12, /* hash-indexed directory */
+ EXT4_INODE_IMAGIC = 13, /* AFS directory */
+ EXT4_INODE_JOURNAL_DATA = 14, /* file data should be journaled */
+ EXT4_INODE_NOTAIL = 15, /* file tail should not be merged */
+ EXT4_INODE_DIRSYNC = 16, /* dirsync behaviour (directories only) */
+ EXT4_INODE_TOPDIR = 17, /* Top of directory hierarchies*/
+ EXT4_INODE_HUGE_FILE = 18, /* Set to each huge file */
+ EXT4_INODE_EXTENTS = 19, /* Inode uses extents */
+ EXT4_INODE_EA_INODE = 21, /* Inode used for large EA */
+ EXT4_INODE_EOFBLOCKS = 22, /* Blocks allocated beyond EOF */
+ EXT4_INODE_RESERVED = 31, /* reserved for ext4 lib */
+};
+
+#define TEST_FLAG_VALUE(FLAG) (EXT4_##FLAG##_FL == (1 << EXT4_INODE_##FLAG))
+#define CHECK_FLAG_VALUE(FLAG) if (!TEST_FLAG_VALUE(FLAG)) { \
+ printk(KERN_EMERG "EXT4 flag fail: " #FLAG ": %d %d\n", \
+ EXT4_##FLAG##_FL, EXT4_INODE_##FLAG); BUG_ON(1); }
+
+/*
+ * Since it's pretty easy to mix up bit numbers and hex values, and we
+ * can't do a compile-time test for ENUM values, we use a run-time
+ * test to make sure that EXT4_XXX_FL is consistent with respect to
+ * EXT4_INODE_XXX. If all is well the printk and BUG_ON will all drop
+ * out so it won't cost any extra space in the compiled kernel image.
+ * But it's important that these values are the same, since we are
+ * using EXT4_INODE_XXX to test for the flag values, but EXT4_XX_FL
+ * must be consistent with the values of FS_XXX_FL defined in
+ * include/linux/fs.h and the on-disk values found in ext2, ext3, and
+ * ext4 filesystems, and of course the values defined in e2fsprogs.
+ *
+ * It's not paranoia if the Murphy's Law really *is* out to get you. :-)
+ */
+static inline void ext4_check_flag_values(void)
+{
+ CHECK_FLAG_VALUE(SECRM);
+ CHECK_FLAG_VALUE(UNRM);
+ CHECK_FLAG_VALUE(COMPR);
+ CHECK_FLAG_VALUE(SYNC);
+ CHECK_FLAG_VALUE(IMMUTABLE);
+ CHECK_FLAG_VALUE(APPEND);
+ CHECK_FLAG_VALUE(NODUMP);
+ CHECK_FLAG_VALUE(NOATIME);
+ CHECK_FLAG_VALUE(DIRTY);
+ CHECK_FLAG_VALUE(COMPRBLK);
+ CHECK_FLAG_VALUE(NOCOMPR);
+ CHECK_FLAG_VALUE(ECOMPR);
+ CHECK_FLAG_VALUE(INDEX);
+ CHECK_FLAG_VALUE(IMAGIC);
+ CHECK_FLAG_VALUE(JOURNAL_DATA);
+ CHECK_FLAG_VALUE(NOTAIL);
+ CHECK_FLAG_VALUE(DIRSYNC);
+ CHECK_FLAG_VALUE(TOPDIR);
+ CHECK_FLAG_VALUE(HUGE_FILE);
+ CHECK_FLAG_VALUE(EXTENTS);
+ CHECK_FLAG_VALUE(EA_INODE);
+ CHECK_FLAG_VALUE(EOFBLOCKS);
+ CHECK_FLAG_VALUE(RESERVED);
+}
+
/* Used to pass group descriptor data when online resize is done */
struct ext4_new_group_input {
__u32 group; /* Group number for this data */
@@ -332,6 +435,18 @@
__u16 unused;
};
+#if defined(__KERNEL__) && defined(CONFIG_COMPAT)
+struct compat_ext4_new_group_input {
+ u32 group;
+ compat_u64 block_bitmap;
+ compat_u64 inode_bitmap;
+ compat_u64 inode_table;
+ u32 blocks_count;
+ u16 reserved_blocks;
+ u16 unused;
+};
+#endif
+
/* The struct ext4_new_group_input in kernel space, with free_blocks_count */
struct ext4_new_group_data {
__u32 group;
@@ -355,7 +470,7 @@
#define EXT4_GET_BLOCKS_CREATE_UNINIT_EXT (EXT4_GET_BLOCKS_UNINIT_EXT|\
EXT4_GET_BLOCKS_CREATE)
/* Caller is from the delayed allocation writeout path,
- so set the magic i_delalloc_reserve_flag after taking the
+ so set the magic i_delalloc_reserve_flag after taking the
inode allocation semaphore for */
#define EXT4_GET_BLOCKS_DELALLOC_RESERVE 0x0004
/* caller is from the direct IO path, request to creation of an
@@ -398,6 +513,7 @@
#define EXT4_IOC_ALLOC_DA_BLKS _IO('f', 12)
#define EXT4_IOC_MOVE_EXT _IOWR('f', 15, struct move_extent)
+#if defined(__KERNEL__) && defined(CONFIG_COMPAT)
/*
* ioctl commands in 32 bit emulation
*/
@@ -408,11 +524,13 @@
#define EXT4_IOC32_GETRSVSZ _IOR('f', 5, int)
#define EXT4_IOC32_SETRSVSZ _IOW('f', 6, int)
#define EXT4_IOC32_GROUP_EXTEND _IOW('f', 7, unsigned int)
+#define EXT4_IOC32_GROUP_ADD _IOW('f', 8, struct compat_ext4_new_group_input)
#ifdef CONFIG_JBD2_DEBUG
#define EXT4_IOC32_WAIT_FOR_READONLY _IOR('f', 99, int)
#endif
#define EXT4_IOC32_GETVERSION_OLD FS_IOC32_GETVERSION
#define EXT4_IOC32_SETVERSION_OLD FS_IOC32_SETVERSION
+#endif
/*
@@ -616,9 +734,8 @@
*/
struct ext4_inode_info {
__le32 i_data[15]; /* unconverted */
- __u32 i_flags;
- ext4_fsblk_t i_file_acl;
__u32 i_dtime;
+ ext4_fsblk_t i_file_acl;
/*
* i_block_group is the number of the block group which contains
@@ -629,6 +746,7 @@
*/
ext4_group_t i_block_group;
unsigned long i_state_flags; /* Dynamic state flags */
+ unsigned long i_flags;
ext4_lblk_t i_dir_start_lookup;
#ifdef CONFIG_EXT4_FS_XATTR
@@ -1062,22 +1180,25 @@
EXT4_STATE_DA_ALLOC_CLOSE, /* Alloc DA blks on close */
EXT4_STATE_EXT_MIGRATE, /* Inode is migrating */
EXT4_STATE_DIO_UNWRITTEN, /* need convert on dio done*/
+ EXT4_STATE_NEWENTRY, /* File just added to dir */
};
-static inline int ext4_test_inode_state(struct inode *inode, int bit)
-{
- return test_bit(bit, &EXT4_I(inode)->i_state_flags);
+#define EXT4_INODE_BIT_FNS(name, field) \
+static inline int ext4_test_inode_##name(struct inode *inode, int bit) \
+{ \
+ return test_bit(bit, &EXT4_I(inode)->i_##field); \
+} \
+static inline void ext4_set_inode_##name(struct inode *inode, int bit) \
+{ \
+ set_bit(bit, &EXT4_I(inode)->i_##field); \
+} \
+static inline void ext4_clear_inode_##name(struct inode *inode, int bit) \
+{ \
+ clear_bit(bit, &EXT4_I(inode)->i_##field); \
}
-static inline void ext4_set_inode_state(struct inode *inode, int bit)
-{
- set_bit(bit, &EXT4_I(inode)->i_state_flags);
-}
-
-static inline void ext4_clear_inode_state(struct inode *inode, int bit)
-{
- clear_bit(bit, &EXT4_I(inode)->i_state_flags);
-}
+EXT4_INODE_BIT_FNS(flag, flags)
+EXT4_INODE_BIT_FNS(state, state_flags)
#else
/* Assume that user mode programs are passing in an ext4fs superblock, not
* a kernel struct super_block. This will allow us to call the feature-test
@@ -1264,7 +1385,7 @@
#define is_dx(dir) (EXT4_HAS_COMPAT_FEATURE(dir->i_sb, \
EXT4_FEATURE_COMPAT_DIR_INDEX) && \
- (EXT4_I(dir)->i_flags & EXT4_INDEX_FL))
+ ext4_test_inode_flag((dir), EXT4_INODE_INDEX))
#define EXT4_DIR_LINK_MAX(dir) (!is_dx(dir) && (dir)->i_nlink >= EXT4_LINK_MAX)
#define EXT4_DIR_LINK_EMPTY(dir) ((dir)->i_nlink == 2 || (dir)->i_nlink == 1)
@@ -1398,7 +1519,7 @@
extern void ext4_htree_free_dir_info(struct dir_private_info *p);
/* fsync.c */
-extern int ext4_sync_file(struct file *, struct dentry *, int);
+extern int ext4_sync_file(struct file *, int);
/* hash.c */
extern int ext4fs_dirhash(const char *name, int len, struct
@@ -1678,6 +1799,7 @@
ext4_grpblk_t bb_first_free; /* first free block */
ext4_grpblk_t bb_free; /* total free blocks */
ext4_grpblk_t bb_fragments; /* nr of freespace fragments */
+ ext4_grpblk_t bb_largest_free_order;/* order of largest frag in BG */
struct list_head bb_prealloc_list;
#ifdef DOUBLE_CHECK
void *bb_bitmap;
@@ -1772,9 +1894,8 @@
extern int ext4_ext_writepage_trans_blocks(struct inode *, int);
extern int ext4_ext_index_trans_blocks(struct inode *inode, int nrblocks,
int chunk);
-extern int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
- ext4_lblk_t iblock, unsigned int max_blocks,
- struct buffer_head *bh_result, int flags);
+extern int ext4_ext_map_blocks(handle_t *handle, struct inode *inode,
+ struct ext4_map_blocks *map, int flags);
extern void ext4_ext_truncate(struct inode *);
extern void ext4_ext_init(struct super_block *);
extern void ext4_ext_release(struct super_block *);
@@ -1782,6 +1903,8 @@
loff_t len);
extern int ext4_convert_unwritten_extents(struct inode *inode, loff_t offset,
ssize_t len);
+extern int ext4_map_blocks(handle_t *handle, struct inode *inode,
+ struct ext4_map_blocks *map, int flags);
extern int ext4_get_blocks(handle_t *handle, struct inode *inode,
sector_t block, unsigned int max_blocks,
struct buffer_head *bh, int flags);
diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h
index b79ad51..dade0c0 100644
--- a/fs/ext4/ext4_jbd2.h
+++ b/fs/ext4/ext4_jbd2.h
@@ -273,7 +273,7 @@
return 1;
if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA)
return 1;
- if (EXT4_I(inode)->i_flags & EXT4_JOURNAL_DATA_FL)
+ if (ext4_test_inode_flag(inode, EXT4_INODE_JOURNAL_DATA))
return 1;
return 0;
}
@@ -284,7 +284,7 @@
return 0;
if (!S_ISREG(inode->i_mode))
return 0;
- if (EXT4_I(inode)->i_flags & EXT4_JOURNAL_DATA_FL)
+ if (ext4_test_inode_flag(inode, EXT4_INODE_JOURNAL_DATA))
return 0;
if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA)
return 1;
@@ -297,7 +297,7 @@
return 0;
if (EXT4_JOURNAL(inode) == NULL)
return 1;
- if (EXT4_I(inode)->i_flags & EXT4_JOURNAL_DATA_FL)
+ if (ext4_test_inode_flag(inode, EXT4_INODE_JOURNAL_DATA))
return 0;
if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_WRITEBACK_DATA)
return 1;
@@ -321,7 +321,7 @@
return 0;
if (!S_ISREG(inode->i_mode))
return 0;
- if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL))
+ if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
return 0;
if (ext4_should_journal_data(inode))
return 0;
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 236b834..377309c 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -107,11 +107,8 @@
if (err <= 0)
return err;
err = ext4_truncate_restart_trans(handle, inode, needed);
- /*
- * We have dropped i_data_sem so someone might have cached again
- * an extent we are going to truncate.
- */
- ext4_ext_invalidate_cache(inode);
+ if (err == 0)
+ err = -EAGAIN;
return err;
}
@@ -185,10 +182,10 @@
if (flex_size >= EXT4_FLEX_SIZE_DIR_ALLOC_SCHEME) {
/*
* If there are at least EXT4_FLEX_SIZE_DIR_ALLOC_SCHEME
- * block groups per flexgroup, reserve the first block
- * group for directories and special files. Regular
+ * block groups per flexgroup, reserve the first block
+ * group for directories and special files. Regular
* files will start at the second block group. This
- * tends to speed up directory access and improves
+ * tends to speed up directory access and improves
* fsck times.
*/
block_group &= ~(flex_size-1);
@@ -439,10 +436,10 @@
return 0;
corrupted:
- __ext4_error(inode->i_sb, function,
- "bad header/extent in inode #%lu: %s - magic %x, "
+ ext4_error_inode(function, inode,
+ "bad header/extent: %s - magic %x, "
"entries %u, max %u(%u), depth %u(%u)",
- inode->i_ino, error_msg, le16_to_cpu(eh->eh_magic),
+ error_msg, le16_to_cpu(eh->eh_magic),
le16_to_cpu(eh->eh_entries), le16_to_cpu(eh->eh_max),
max, le16_to_cpu(eh->eh_depth), depth);
@@ -1622,9 +1619,7 @@
merge_done = 1;
WARN_ON(eh->eh_entries == 0);
if (!eh->eh_entries)
- ext4_error(inode->i_sb,
- "inode#%lu, eh->eh_entries = 0!",
- inode->i_ino);
+ EXT4_ERROR_INODE(inode, "eh->eh_entries = 0!");
}
return merge_done;
@@ -2039,7 +2034,7 @@
struct ext4_ext_cache *cex;
int ret = EXT4_EXT_CACHE_NO;
- /*
+ /*
* We borrow i_block_reservation_lock to protect i_cached_extent
*/
spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
@@ -2361,7 +2356,7 @@
int depth = ext_depth(inode);
struct ext4_ext_path *path;
handle_t *handle;
- int i = 0, err = 0;
+ int i, err;
ext_debug("truncate since %u\n", start);
@@ -2370,23 +2365,26 @@
if (IS_ERR(handle))
return PTR_ERR(handle);
+again:
ext4_ext_invalidate_cache(inode);
/*
* We start scanning from right side, freeing all the blocks
* after i_size and walking into the tree depth-wise.
*/
+ depth = ext_depth(inode);
path = kzalloc(sizeof(struct ext4_ext_path) * (depth + 1), GFP_NOFS);
if (path == NULL) {
ext4_journal_stop(handle);
return -ENOMEM;
}
+ path[0].p_depth = depth;
path[0].p_hdr = ext_inode_hdr(inode);
if (ext4_ext_check(inode, path[0].p_hdr, depth)) {
err = -EIO;
goto out;
}
- path[0].p_depth = depth;
+ i = err = 0;
while (i >= 0 && err == 0) {
if (i == depth) {
@@ -2480,6 +2478,8 @@
out:
ext4_ext_drop_refs(path);
kfree(path);
+ if (err == -EAGAIN)
+ goto again;
ext4_journal_stop(handle);
return err;
@@ -2544,7 +2544,7 @@
/* FIXME!! we need to try to merge to left or right after zero-out */
static int ext4_ext_zeroout(struct inode *inode, struct ext4_extent *ex)
{
- int ret = -EIO;
+ int ret;
struct bio *bio;
int blkbits, blocksize;
sector_t ee_pblock;
@@ -2568,6 +2568,9 @@
len = ee_len;
bio = bio_alloc(GFP_NOIO, len);
+ if (!bio)
+ return -ENOMEM;
+
bio->bi_sector = ee_pblock;
bio->bi_bdev = inode->i_sb->s_bdev;
@@ -2595,22 +2598,20 @@
submit_bio(WRITE, bio);
wait_for_completion(&event);
- if (test_bit(BIO_UPTODATE, &bio->bi_flags))
- ret = 0;
- else {
- ret = -EIO;
- break;
+ if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) {
+ bio_put(bio);
+ return -EIO;
}
bio_put(bio);
ee_len -= done;
ee_pblock += done << (blkbits - 9);
}
- return ret;
+ return 0;
}
#define EXT4_EXT_ZERO_LEN 7
/*
- * This function is called by ext4_ext_get_blocks() if someone tries to write
+ * This function is called by ext4_ext_map_blocks() if someone tries to write
* to an uninitialized extent. It may result in splitting the uninitialized
* extent into multiple extents (upto three - one initialized and two
* uninitialized).
@@ -2620,39 +2621,55 @@
* c> Splits in three extents: Somone is writing in middle of the extent
*/
static int ext4_ext_convert_to_initialized(handle_t *handle,
- struct inode *inode,
- struct ext4_ext_path *path,
- ext4_lblk_t iblock,
- unsigned int max_blocks)
+ struct inode *inode,
+ struct ext4_map_blocks *map,
+ struct ext4_ext_path *path)
{
struct ext4_extent *ex, newex, orig_ex;
struct ext4_extent *ex1 = NULL;
struct ext4_extent *ex2 = NULL;
struct ext4_extent *ex3 = NULL;
struct ext4_extent_header *eh;
- ext4_lblk_t ee_block;
+ ext4_lblk_t ee_block, eof_block;
unsigned int allocated, ee_len, depth;
ext4_fsblk_t newblock;
int err = 0;
int ret = 0;
+ int may_zeroout;
+
+ ext_debug("ext4_ext_convert_to_initialized: inode %lu, logical"
+ "block %llu, max_blocks %u\n", inode->i_ino,
+ (unsigned long long)map->m_lblk, map->m_len);
+
+ eof_block = (inode->i_size + inode->i_sb->s_blocksize - 1) >>
+ inode->i_sb->s_blocksize_bits;
+ if (eof_block < map->m_lblk + map->m_len)
+ eof_block = map->m_lblk + map->m_len;
depth = ext_depth(inode);
eh = path[depth].p_hdr;
ex = path[depth].p_ext;
ee_block = le32_to_cpu(ex->ee_block);
ee_len = ext4_ext_get_actual_len(ex);
- allocated = ee_len - (iblock - ee_block);
- newblock = iblock - ee_block + ext_pblock(ex);
+ allocated = ee_len - (map->m_lblk - ee_block);
+ newblock = map->m_lblk - ee_block + ext_pblock(ex);
+
ex2 = ex;
orig_ex.ee_block = ex->ee_block;
orig_ex.ee_len = cpu_to_le16(ee_len);
ext4_ext_store_pblock(&orig_ex, ext_pblock(ex));
+ /*
+ * It is safe to convert extent to initialized via explicit
+ * zeroout only if extent is fully insde i_size or new_size.
+ */
+ may_zeroout = ee_block + ee_len <= eof_block;
+
err = ext4_ext_get_access(handle, inode, path + depth);
if (err)
goto out;
/* If extent has less than 2*EXT4_EXT_ZERO_LEN zerout directly */
- if (ee_len <= 2*EXT4_EXT_ZERO_LEN) {
+ if (ee_len <= 2*EXT4_EXT_ZERO_LEN && may_zeroout) {
err = ext4_ext_zeroout(inode, &orig_ex);
if (err)
goto fix_extent_len;
@@ -2665,10 +2682,10 @@
return allocated;
}
- /* ex1: ee_block to iblock - 1 : uninitialized */
- if (iblock > ee_block) {
+ /* ex1: ee_block to map->m_lblk - 1 : uninitialized */
+ if (map->m_lblk > ee_block) {
ex1 = ex;
- ex1->ee_len = cpu_to_le16(iblock - ee_block);
+ ex1->ee_len = cpu_to_le16(map->m_lblk - ee_block);
ext4_ext_mark_uninitialized(ex1);
ex2 = &newex;
}
@@ -2677,15 +2694,15 @@
* we insert ex3, if ex1 is NULL. This is to avoid temporary
* overlap of blocks.
*/
- if (!ex1 && allocated > max_blocks)
- ex2->ee_len = cpu_to_le16(max_blocks);
+ if (!ex1 && allocated > map->m_len)
+ ex2->ee_len = cpu_to_le16(map->m_len);
/* ex3: to ee_block + ee_len : uninitialised */
- if (allocated > max_blocks) {
+ if (allocated > map->m_len) {
unsigned int newdepth;
/* If extent has less than EXT4_EXT_ZERO_LEN zerout directly */
- if (allocated <= EXT4_EXT_ZERO_LEN) {
+ if (allocated <= EXT4_EXT_ZERO_LEN && may_zeroout) {
/*
- * iblock == ee_block is handled by the zerouout
+ * map->m_lblk == ee_block is handled by the zerouout
* at the beginning.
* Mark first half uninitialized.
* Mark second half initialized and zero out the
@@ -2698,7 +2715,7 @@
ext4_ext_dirty(handle, inode, path + depth);
ex3 = &newex;
- ex3->ee_block = cpu_to_le32(iblock);
+ ex3->ee_block = cpu_to_le32(map->m_lblk);
ext4_ext_store_pblock(ex3, newblock);
ex3->ee_len = cpu_to_le16(allocated);
err = ext4_ext_insert_extent(handle, inode, path,
@@ -2711,7 +2728,7 @@
ex->ee_len = orig_ex.ee_len;
ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
ext4_ext_dirty(handle, inode, path + depth);
- /* blocks available from iblock */
+ /* blocks available from map->m_lblk */
return allocated;
} else if (err)
@@ -2733,8 +2750,8 @@
*/
depth = ext_depth(inode);
ext4_ext_drop_refs(path);
- path = ext4_ext_find_extent(inode,
- iblock, path);
+ path = ext4_ext_find_extent(inode, map->m_lblk,
+ path);
if (IS_ERR(path)) {
err = PTR_ERR(path);
return err;
@@ -2754,12 +2771,12 @@
return allocated;
}
ex3 = &newex;
- ex3->ee_block = cpu_to_le32(iblock + max_blocks);
- ext4_ext_store_pblock(ex3, newblock + max_blocks);
- ex3->ee_len = cpu_to_le16(allocated - max_blocks);
+ ex3->ee_block = cpu_to_le32(map->m_lblk + map->m_len);
+ ext4_ext_store_pblock(ex3, newblock + map->m_len);
+ ex3->ee_len = cpu_to_le16(allocated - map->m_len);
ext4_ext_mark_uninitialized(ex3);
err = ext4_ext_insert_extent(handle, inode, path, ex3, 0);
- if (err == -ENOSPC) {
+ if (err == -ENOSPC && may_zeroout) {
err = ext4_ext_zeroout(inode, &orig_ex);
if (err)
goto fix_extent_len;
@@ -2769,7 +2786,7 @@
ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
ext4_ext_dirty(handle, inode, path + depth);
/* zeroed the full extent */
- /* blocks available from iblock */
+ /* blocks available from map->m_lblk */
return allocated;
} else if (err)
@@ -2783,11 +2800,13 @@
* update the extent length after successful insert of the
* split extent
*/
- orig_ex.ee_len = cpu_to_le16(ee_len -
- ext4_ext_get_actual_len(ex3));
+ ee_len -= ext4_ext_get_actual_len(ex3);
+ orig_ex.ee_len = cpu_to_le16(ee_len);
+ may_zeroout = ee_block + ee_len <= eof_block;
+
depth = newdepth;
ext4_ext_drop_refs(path);
- path = ext4_ext_find_extent(inode, iblock, path);
+ path = ext4_ext_find_extent(inode, map->m_lblk, path);
if (IS_ERR(path)) {
err = PTR_ERR(path);
goto out;
@@ -2801,14 +2820,14 @@
if (err)
goto out;
- allocated = max_blocks;
+ allocated = map->m_len;
/* If extent has less than EXT4_EXT_ZERO_LEN and we are trying
* to insert a extent in the middle zerout directly
* otherwise give the extent a chance to merge to left
*/
if (le16_to_cpu(orig_ex.ee_len) <= EXT4_EXT_ZERO_LEN &&
- iblock != ee_block) {
+ map->m_lblk != ee_block && may_zeroout) {
err = ext4_ext_zeroout(inode, &orig_ex);
if (err)
goto fix_extent_len;
@@ -2818,7 +2837,7 @@
ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
ext4_ext_dirty(handle, inode, path + depth);
/* zero out the first half */
- /* blocks available from iblock */
+ /* blocks available from map->m_lblk */
return allocated;
}
}
@@ -2829,12 +2848,12 @@
*/
if (ex1 && ex1 != ex) {
ex1 = ex;
- ex1->ee_len = cpu_to_le16(iblock - ee_block);
+ ex1->ee_len = cpu_to_le16(map->m_lblk - ee_block);
ext4_ext_mark_uninitialized(ex1);
ex2 = &newex;
}
- /* ex2: iblock to iblock + maxblocks-1 : initialised */
- ex2->ee_block = cpu_to_le32(iblock);
+ /* ex2: map->m_lblk to map->m_lblk + maxblocks-1 : initialised */
+ ex2->ee_block = cpu_to_le32(map->m_lblk);
ext4_ext_store_pblock(ex2, newblock);
ex2->ee_len = cpu_to_le16(allocated);
if (ex2 != ex)
@@ -2877,7 +2896,7 @@
goto out;
insert:
err = ext4_ext_insert_extent(handle, inode, path, &newex, 0);
- if (err == -ENOSPC) {
+ if (err == -ENOSPC && may_zeroout) {
err = ext4_ext_zeroout(inode, &orig_ex);
if (err)
goto fix_extent_len;
@@ -2904,7 +2923,7 @@
}
/*
- * This function is called by ext4_ext_get_blocks() from
+ * This function is called by ext4_ext_map_blocks() from
* ext4_get_blocks_dio_write() when DIO to write
* to an uninitialized extent.
*
@@ -2927,9 +2946,8 @@
*/
static int ext4_split_unwritten_extents(handle_t *handle,
struct inode *inode,
+ struct ext4_map_blocks *map,
struct ext4_ext_path *path,
- ext4_lblk_t iblock,
- unsigned int max_blocks,
int flags)
{
struct ext4_extent *ex, newex, orig_ex;
@@ -2937,41 +2955,55 @@
struct ext4_extent *ex2 = NULL;
struct ext4_extent *ex3 = NULL;
struct ext4_extent_header *eh;
- ext4_lblk_t ee_block;
+ ext4_lblk_t ee_block, eof_block;
unsigned int allocated, ee_len, depth;
ext4_fsblk_t newblock;
int err = 0;
+ int may_zeroout;
- ext_debug("ext4_split_unwritten_extents: inode %lu,"
- "iblock %llu, max_blocks %u\n", inode->i_ino,
- (unsigned long long)iblock, max_blocks);
+ ext_debug("ext4_split_unwritten_extents: inode %lu, logical"
+ "block %llu, max_blocks %u\n", inode->i_ino,
+ (unsigned long long)map->m_lblk, map->m_len);
+
+ eof_block = (inode->i_size + inode->i_sb->s_blocksize - 1) >>
+ inode->i_sb->s_blocksize_bits;
+ if (eof_block < map->m_lblk + map->m_len)
+ eof_block = map->m_lblk + map->m_len;
+
depth = ext_depth(inode);
eh = path[depth].p_hdr;
ex = path[depth].p_ext;
ee_block = le32_to_cpu(ex->ee_block);
ee_len = ext4_ext_get_actual_len(ex);
- allocated = ee_len - (iblock - ee_block);
- newblock = iblock - ee_block + ext_pblock(ex);
+ allocated = ee_len - (map->m_lblk - ee_block);
+ newblock = map->m_lblk - ee_block + ext_pblock(ex);
+
ex2 = ex;
orig_ex.ee_block = ex->ee_block;
orig_ex.ee_len = cpu_to_le16(ee_len);
ext4_ext_store_pblock(&orig_ex, ext_pblock(ex));
/*
+ * It is safe to convert extent to initialized via explicit
+ * zeroout only if extent is fully insde i_size or new_size.
+ */
+ may_zeroout = ee_block + ee_len <= eof_block;
+
+ /*
* If the uninitialized extent begins at the same logical
* block where the write begins, and the write completely
* covers the extent, then we don't need to split it.
*/
- if ((iblock == ee_block) && (allocated <= max_blocks))
+ if ((map->m_lblk == ee_block) && (allocated <= map->m_len))
return allocated;
err = ext4_ext_get_access(handle, inode, path + depth);
if (err)
goto out;
- /* ex1: ee_block to iblock - 1 : uninitialized */
- if (iblock > ee_block) {
+ /* ex1: ee_block to map->m_lblk - 1 : uninitialized */
+ if (map->m_lblk > ee_block) {
ex1 = ex;
- ex1->ee_len = cpu_to_le16(iblock - ee_block);
+ ex1->ee_len = cpu_to_le16(map->m_lblk - ee_block);
ext4_ext_mark_uninitialized(ex1);
ex2 = &newex;
}
@@ -2980,18 +3012,18 @@
* we insert ex3, if ex1 is NULL. This is to avoid temporary
* overlap of blocks.
*/
- if (!ex1 && allocated > max_blocks)
- ex2->ee_len = cpu_to_le16(max_blocks);
+ if (!ex1 && allocated > map->m_len)
+ ex2->ee_len = cpu_to_le16(map->m_len);
/* ex3: to ee_block + ee_len : uninitialised */
- if (allocated > max_blocks) {
+ if (allocated > map->m_len) {
unsigned int newdepth;
ex3 = &newex;
- ex3->ee_block = cpu_to_le32(iblock + max_blocks);
- ext4_ext_store_pblock(ex3, newblock + max_blocks);
- ex3->ee_len = cpu_to_le16(allocated - max_blocks);
+ ex3->ee_block = cpu_to_le32(map->m_lblk + map->m_len);
+ ext4_ext_store_pblock(ex3, newblock + map->m_len);
+ ex3->ee_len = cpu_to_le16(allocated - map->m_len);
ext4_ext_mark_uninitialized(ex3);
err = ext4_ext_insert_extent(handle, inode, path, ex3, flags);
- if (err == -ENOSPC) {
+ if (err == -ENOSPC && may_zeroout) {
err = ext4_ext_zeroout(inode, &orig_ex);
if (err)
goto fix_extent_len;
@@ -3001,7 +3033,7 @@
ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
ext4_ext_dirty(handle, inode, path + depth);
/* zeroed the full extent */
- /* blocks available from iblock */
+ /* blocks available from map->m_lblk */
return allocated;
} else if (err)
@@ -3015,11 +3047,13 @@
* update the extent length after successful insert of the
* split extent
*/
- orig_ex.ee_len = cpu_to_le16(ee_len -
- ext4_ext_get_actual_len(ex3));
+ ee_len -= ext4_ext_get_actual_len(ex3);
+ orig_ex.ee_len = cpu_to_le16(ee_len);
+ may_zeroout = ee_block + ee_len <= eof_block;
+
depth = newdepth;
ext4_ext_drop_refs(path);
- path = ext4_ext_find_extent(inode, iblock, path);
+ path = ext4_ext_find_extent(inode, map->m_lblk, path);
if (IS_ERR(path)) {
err = PTR_ERR(path);
goto out;
@@ -3033,7 +3067,7 @@
if (err)
goto out;
- allocated = max_blocks;
+ allocated = map->m_len;
}
/*
* If there was a change of depth as part of the
@@ -3042,15 +3076,15 @@
*/
if (ex1 && ex1 != ex) {
ex1 = ex;
- ex1->ee_len = cpu_to_le16(iblock - ee_block);
+ ex1->ee_len = cpu_to_le16(map->m_lblk - ee_block);
ext4_ext_mark_uninitialized(ex1);
ex2 = &newex;
}
/*
- * ex2: iblock to iblock + maxblocks-1 : to be direct IO written,
- * uninitialised still.
+ * ex2: map->m_lblk to map->m_lblk + map->m_len-1 : to be written
+ * using direct I/O, uninitialised still.
*/
- ex2->ee_block = cpu_to_le32(iblock);
+ ex2->ee_block = cpu_to_le32(map->m_lblk);
ext4_ext_store_pblock(ex2, newblock);
ex2->ee_len = cpu_to_le16(allocated);
ext4_ext_mark_uninitialized(ex2);
@@ -3062,7 +3096,7 @@
goto out;
insert:
err = ext4_ext_insert_extent(handle, inode, path, &newex, flags);
- if (err == -ENOSPC) {
+ if (err == -ENOSPC && may_zeroout) {
err = ext4_ext_zeroout(inode, &orig_ex);
if (err)
goto fix_extent_len;
@@ -3152,10 +3186,9 @@
static int
ext4_ext_handle_uninitialized_extents(handle_t *handle, struct inode *inode,
- ext4_lblk_t iblock, unsigned int max_blocks,
+ struct ext4_map_blocks *map,
struct ext4_ext_path *path, int flags,
- unsigned int allocated, struct buffer_head *bh_result,
- ext4_fsblk_t newblock)
+ unsigned int allocated, ext4_fsblk_t newblock)
{
int ret = 0;
int err = 0;
@@ -3163,15 +3196,14 @@
ext_debug("ext4_ext_handle_uninitialized_extents: inode %lu, logical"
"block %llu, max_blocks %u, flags %d, allocated %u",
- inode->i_ino, (unsigned long long)iblock, max_blocks,
+ inode->i_ino, (unsigned long long)map->m_lblk, map->m_len,
flags, allocated);
ext4_ext_show_leaf(inode, path);
/* get_block() before submit the IO, split the extent */
if ((flags & EXT4_GET_BLOCKS_PRE_IO)) {
- ret = ext4_split_unwritten_extents(handle,
- inode, path, iblock,
- max_blocks, flags);
+ ret = ext4_split_unwritten_extents(handle, inode, map,
+ path, flags);
/*
* Flag the inode(non aio case) or end_io struct (aio case)
* that this IO needs to convertion to written when IO is
@@ -3182,7 +3214,7 @@
else
ext4_set_inode_state(inode, EXT4_STATE_DIO_UNWRITTEN);
if (ext4_should_dioread_nolock(inode))
- set_buffer_uninit(bh_result);
+ map->m_flags |= EXT4_MAP_UNINIT;
goto out;
}
/* IO end_io complete, convert the filled extent to written */
@@ -3210,14 +3242,12 @@
* the buffer head will be unmapped so that
* a read from the block returns 0s.
*/
- set_buffer_unwritten(bh_result);
+ map->m_flags |= EXT4_MAP_UNWRITTEN;
goto out1;
}
/* buffered write, writepage time, convert*/
- ret = ext4_ext_convert_to_initialized(handle, inode,
- path, iblock,
- max_blocks);
+ ret = ext4_ext_convert_to_initialized(handle, inode, map, path);
if (ret >= 0)
ext4_update_inode_fsync_trans(handle, inode, 1);
out:
@@ -3226,7 +3256,7 @@
goto out2;
} else
allocated = ret;
- set_buffer_new(bh_result);
+ map->m_flags |= EXT4_MAP_NEW;
/*
* if we allocated more blocks than requested
* we need to make sure we unmap the extra block
@@ -3234,11 +3264,11 @@
* unmapped later when we find the buffer_head marked
* new.
*/
- if (allocated > max_blocks) {
+ if (allocated > map->m_len) {
unmap_underlying_metadata_blocks(inode->i_sb->s_bdev,
- newblock + max_blocks,
- allocated - max_blocks);
- allocated = max_blocks;
+ newblock + map->m_len,
+ allocated - map->m_len);
+ allocated = map->m_len;
}
/*
@@ -3252,13 +3282,13 @@
ext4_da_update_reserve_space(inode, allocated, 0);
map_out:
- set_buffer_mapped(bh_result);
+ map->m_flags |= EXT4_MAP_MAPPED;
out1:
- if (allocated > max_blocks)
- allocated = max_blocks;
+ if (allocated > map->m_len)
+ allocated = map->m_len;
ext4_ext_show_leaf(inode, path);
- bh_result->b_bdev = inode->i_sb->s_bdev;
- bh_result->b_blocknr = newblock;
+ map->m_pblk = newblock;
+ map->m_len = allocated;
out2:
if (path) {
ext4_ext_drop_refs(path);
@@ -3284,26 +3314,23 @@
*
* return < 0, error case.
*/
-int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
- ext4_lblk_t iblock,
- unsigned int max_blocks, struct buffer_head *bh_result,
- int flags)
+int ext4_ext_map_blocks(handle_t *handle, struct inode *inode,
+ struct ext4_map_blocks *map, int flags)
{
struct ext4_ext_path *path = NULL;
struct ext4_extent_header *eh;
struct ext4_extent newex, *ex, *last_ex;
ext4_fsblk_t newblock;
- int err = 0, depth, ret, cache_type;
+ int i, err = 0, depth, ret, cache_type;
unsigned int allocated = 0;
struct ext4_allocation_request ar;
ext4_io_end_t *io = EXT4_I(inode)->cur_aio_dio;
- __clear_bit(BH_New, &bh_result->b_state);
ext_debug("blocks %u/%u requested for inode %lu\n",
- iblock, max_blocks, inode->i_ino);
+ map->m_lblk, map->m_len, inode->i_ino);
/* check in cache */
- cache_type = ext4_ext_in_cache(inode, iblock, &newex);
+ cache_type = ext4_ext_in_cache(inode, map->m_lblk, &newex);
if (cache_type) {
if (cache_type == EXT4_EXT_CACHE_GAP) {
if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) {
@@ -3316,12 +3343,12 @@
/* we should allocate requested block */
} else if (cache_type == EXT4_EXT_CACHE_EXTENT) {
/* block is already allocated */
- newblock = iblock
+ newblock = map->m_lblk
- le32_to_cpu(newex.ee_block)
+ ext_pblock(&newex);
/* number of remaining blocks in the extent */
allocated = ext4_ext_get_actual_len(&newex) -
- (iblock - le32_to_cpu(newex.ee_block));
+ (map->m_lblk - le32_to_cpu(newex.ee_block));
goto out;
} else {
BUG();
@@ -3329,7 +3356,7 @@
}
/* find extent for this block */
- path = ext4_ext_find_extent(inode, iblock, NULL);
+ path = ext4_ext_find_extent(inode, map->m_lblk, NULL);
if (IS_ERR(path)) {
err = PTR_ERR(path);
path = NULL;
@@ -3345,8 +3372,9 @@
*/
if (unlikely(path[depth].p_ext == NULL && depth != 0)) {
EXT4_ERROR_INODE(inode, "bad extent address "
- "iblock: %d, depth: %d pblock %lld",
- iblock, depth, path[depth].p_block);
+ "lblock: %lu, depth: %d pblock %lld",
+ (unsigned long) map->m_lblk, depth,
+ path[depth].p_block);
err = -EIO;
goto out2;
}
@@ -3364,12 +3392,12 @@
*/
ee_len = ext4_ext_get_actual_len(ex);
/* if found extent covers block, simply return it */
- if (in_range(iblock, ee_block, ee_len)) {
- newblock = iblock - ee_block + ee_start;
+ if (in_range(map->m_lblk, ee_block, ee_len)) {
+ newblock = map->m_lblk - ee_block + ee_start;
/* number of remaining blocks in the extent */
- allocated = ee_len - (iblock - ee_block);
- ext_debug("%u fit into %u:%d -> %llu\n", iblock,
- ee_block, ee_len, newblock);
+ allocated = ee_len - (map->m_lblk - ee_block);
+ ext_debug("%u fit into %u:%d -> %llu\n", map->m_lblk,
+ ee_block, ee_len, newblock);
/* Do not put uninitialized extent in the cache */
if (!ext4_ext_is_uninitialized(ex)) {
@@ -3379,8 +3407,8 @@
goto out;
}
ret = ext4_ext_handle_uninitialized_extents(handle,
- inode, iblock, max_blocks, path,
- flags, allocated, bh_result, newblock);
+ inode, map, path, flags, allocated,
+ newblock);
return ret;
}
}
@@ -3394,7 +3422,7 @@
* put just found gap into cache to speed up
* subsequent requests
*/
- ext4_ext_put_gap_in_cache(inode, path, iblock);
+ ext4_ext_put_gap_in_cache(inode, path, map->m_lblk);
goto out2;
}
/*
@@ -3402,11 +3430,11 @@
*/
/* find neighbour allocated blocks */
- ar.lleft = iblock;
+ ar.lleft = map->m_lblk;
err = ext4_ext_search_left(inode, path, &ar.lleft, &ar.pleft);
if (err)
goto out2;
- ar.lright = iblock;
+ ar.lright = map->m_lblk;
err = ext4_ext_search_right(inode, path, &ar.lright, &ar.pright);
if (err)
goto out2;
@@ -3417,26 +3445,26 @@
* EXT_INIT_MAX_LEN and for an uninitialized extent this limit is
* EXT_UNINIT_MAX_LEN.
*/
- if (max_blocks > EXT_INIT_MAX_LEN &&
+ if (map->m_len > EXT_INIT_MAX_LEN &&
!(flags & EXT4_GET_BLOCKS_UNINIT_EXT))
- max_blocks = EXT_INIT_MAX_LEN;
- else if (max_blocks > EXT_UNINIT_MAX_LEN &&
+ map->m_len = EXT_INIT_MAX_LEN;
+ else if (map->m_len > EXT_UNINIT_MAX_LEN &&
(flags & EXT4_GET_BLOCKS_UNINIT_EXT))
- max_blocks = EXT_UNINIT_MAX_LEN;
+ map->m_len = EXT_UNINIT_MAX_LEN;
- /* Check if we can really insert (iblock)::(iblock+max_blocks) extent */
- newex.ee_block = cpu_to_le32(iblock);
- newex.ee_len = cpu_to_le16(max_blocks);
+ /* Check if we can really insert (m_lblk)::(m_lblk + m_len) extent */
+ newex.ee_block = cpu_to_le32(map->m_lblk);
+ newex.ee_len = cpu_to_le16(map->m_len);
err = ext4_ext_check_overlap(inode, &newex, path);
if (err)
allocated = ext4_ext_get_actual_len(&newex);
else
- allocated = max_blocks;
+ allocated = map->m_len;
/* allocate new block */
ar.inode = inode;
- ar.goal = ext4_ext_find_goal(inode, path, iblock);
- ar.logical = iblock;
+ ar.goal = ext4_ext_find_goal(inode, path, map->m_lblk);
+ ar.logical = map->m_lblk;
ar.len = allocated;
if (S_ISREG(inode->i_mode))
ar.flags = EXT4_MB_HINT_DATA;
@@ -3470,21 +3498,33 @@
EXT4_STATE_DIO_UNWRITTEN);
}
if (ext4_should_dioread_nolock(inode))
- set_buffer_uninit(bh_result);
+ map->m_flags |= EXT4_MAP_UNINIT;
}
- if (unlikely(EXT4_I(inode)->i_flags & EXT4_EOFBLOCKS_FL)) {
+ if (unlikely(ext4_test_inode_flag(inode, EXT4_INODE_EOFBLOCKS))) {
if (unlikely(!eh->eh_entries)) {
EXT4_ERROR_INODE(inode,
- "eh->eh_entries == 0 ee_block %d",
- ex->ee_block);
+ "eh->eh_entries == 0 and "
+ "EOFBLOCKS_FL set");
err = -EIO;
goto out2;
}
last_ex = EXT_LAST_EXTENT(eh);
- if (iblock + ar.len > le32_to_cpu(last_ex->ee_block)
- + ext4_ext_get_actual_len(last_ex))
- EXT4_I(inode)->i_flags &= ~EXT4_EOFBLOCKS_FL;
+ /*
+ * If the current leaf block was reached by looking at
+ * the last index block all the way down the tree, and
+ * we are extending the inode beyond the last extent
+ * in the current leaf block, then clear the
+ * EOFBLOCKS_FL flag.
+ */
+ for (i = depth-1; i >= 0; i--) {
+ if (path[i].p_idx != EXT_LAST_INDEX(path[i].p_hdr))
+ break;
+ }
+ if ((i < 0) &&
+ (map->m_lblk + ar.len > le32_to_cpu(last_ex->ee_block) +
+ ext4_ext_get_actual_len(last_ex)))
+ ext4_clear_inode_flag(inode, EXT4_INODE_EOFBLOCKS);
}
err = ext4_ext_insert_extent(handle, inode, path, &newex, flags);
if (err) {
@@ -3500,9 +3540,9 @@
/* previous routine could use block we allocated */
newblock = ext_pblock(&newex);
allocated = ext4_ext_get_actual_len(&newex);
- if (allocated > max_blocks)
- allocated = max_blocks;
- set_buffer_new(bh_result);
+ if (allocated > map->m_len)
+ allocated = map->m_len;
+ map->m_flags |= EXT4_MAP_NEW;
/*
* Update reserved blocks/metadata blocks after successful
@@ -3516,18 +3556,18 @@
* when it is _not_ an uninitialized extent.
*/
if ((flags & EXT4_GET_BLOCKS_UNINIT_EXT) == 0) {
- ext4_ext_put_in_cache(inode, iblock, allocated, newblock,
+ ext4_ext_put_in_cache(inode, map->m_lblk, allocated, newblock,
EXT4_EXT_CACHE_EXTENT);
ext4_update_inode_fsync_trans(handle, inode, 1);
} else
ext4_update_inode_fsync_trans(handle, inode, 0);
out:
- if (allocated > max_blocks)
- allocated = max_blocks;
+ if (allocated > map->m_len)
+ allocated = map->m_len;
ext4_ext_show_leaf(inode, path);
- set_buffer_mapped(bh_result);
- bh_result->b_bdev = inode->i_sb->s_bdev;
- bh_result->b_blocknr = newblock;
+ map->m_flags |= EXT4_MAP_MAPPED;
+ map->m_pblk = newblock;
+ map->m_len = allocated;
out2:
if (path) {
ext4_ext_drop_refs(path);
@@ -3625,7 +3665,7 @@
* can proceed even if the new size is the same as i_size.
*/
if (new_size > i_size_read(inode))
- EXT4_I(inode)->i_flags |= EXT4_EOFBLOCKS_FL;
+ ext4_set_inode_flag(inode, EXT4_INODE_EOFBLOCKS);
}
}
@@ -3640,55 +3680,57 @@
long ext4_fallocate(struct inode *inode, int mode, loff_t offset, loff_t len)
{
handle_t *handle;
- ext4_lblk_t block;
loff_t new_size;
unsigned int max_blocks;
int ret = 0;
int ret2 = 0;
int retries = 0;
- struct buffer_head map_bh;
+ struct ext4_map_blocks map;
unsigned int credits, blkbits = inode->i_blkbits;
/*
* currently supporting (pre)allocate mode for extent-based
* files _only_
*/
- if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL))
+ if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
return -EOPNOTSUPP;
/* preallocation to directories is currently not supported */
if (S_ISDIR(inode->i_mode))
return -ENODEV;
- block = offset >> blkbits;
+ map.m_lblk = offset >> blkbits;
/*
* We can't just convert len to max_blocks because
* If blocksize = 4096 offset = 3072 and len = 2048
*/
max_blocks = (EXT4_BLOCK_ALIGN(len + offset, blkbits) >> blkbits)
- - block;
+ - map.m_lblk;
/*
* credits to insert 1 extent into extent tree
*/
credits = ext4_chunk_trans_blocks(inode, max_blocks);
mutex_lock(&inode->i_mutex);
+ ret = inode_newsize_ok(inode, (len + offset));
+ if (ret) {
+ mutex_unlock(&inode->i_mutex);
+ return ret;
+ }
retry:
while (ret >= 0 && ret < max_blocks) {
- block = block + ret;
- max_blocks = max_blocks - ret;
+ map.m_lblk = map.m_lblk + ret;
+ map.m_len = max_blocks = max_blocks - ret;
handle = ext4_journal_start(inode, credits);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
break;
}
- map_bh.b_state = 0;
- ret = ext4_get_blocks(handle, inode, block,
- max_blocks, &map_bh,
+ ret = ext4_map_blocks(handle, inode, &map,
EXT4_GET_BLOCKS_CREATE_UNINIT_EXT);
if (ret <= 0) {
#ifdef EXT4FS_DEBUG
WARN_ON(ret <= 0);
- printk(KERN_ERR "%s: ext4_ext_get_blocks "
+ printk(KERN_ERR "%s: ext4_ext_map_blocks "
"returned error inode#%lu, block=%u, "
"max_blocks=%u", __func__,
inode->i_ino, block, max_blocks);
@@ -3697,14 +3739,14 @@
ret2 = ext4_journal_stop(handle);
break;
}
- if ((block + ret) >= (EXT4_BLOCK_ALIGN(offset + len,
+ if ((map.m_lblk + ret) >= (EXT4_BLOCK_ALIGN(offset + len,
blkbits) >> blkbits))
new_size = offset + len;
else
- new_size = (block + ret) << blkbits;
+ new_size = (map.m_lblk + ret) << blkbits;
ext4_falloc_update_inode(inode, mode, new_size,
- buffer_new(&map_bh));
+ (map.m_flags & EXT4_MAP_NEW));
ext4_mark_inode_dirty(handle, inode);
ret2 = ext4_journal_stop(handle);
if (ret2)
@@ -3733,42 +3775,39 @@
ssize_t len)
{
handle_t *handle;
- ext4_lblk_t block;
unsigned int max_blocks;
int ret = 0;
int ret2 = 0;
- struct buffer_head map_bh;
+ struct ext4_map_blocks map;
unsigned int credits, blkbits = inode->i_blkbits;
- block = offset >> blkbits;
+ map.m_lblk = offset >> blkbits;
/*
* We can't just convert len to max_blocks because
* If blocksize = 4096 offset = 3072 and len = 2048
*/
- max_blocks = (EXT4_BLOCK_ALIGN(len + offset, blkbits) >> blkbits)
- - block;
+ max_blocks = ((EXT4_BLOCK_ALIGN(len + offset, blkbits) >> blkbits) -
+ map.m_lblk);
/*
* credits to insert 1 extent into extent tree
*/
credits = ext4_chunk_trans_blocks(inode, max_blocks);
while (ret >= 0 && ret < max_blocks) {
- block = block + ret;
- max_blocks = max_blocks - ret;
+ map.m_lblk += ret;
+ map.m_len = (max_blocks -= ret);
handle = ext4_journal_start(inode, credits);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
break;
}
- map_bh.b_state = 0;
- ret = ext4_get_blocks(handle, inode, block,
- max_blocks, &map_bh,
+ ret = ext4_map_blocks(handle, inode, &map,
EXT4_GET_BLOCKS_IO_CONVERT_EXT);
if (ret <= 0) {
WARN_ON(ret <= 0);
- printk(KERN_ERR "%s: ext4_ext_get_blocks "
+ printk(KERN_ERR "%s: ext4_ext_map_blocks "
"returned error inode#%lu, block=%u, "
"max_blocks=%u", __func__,
- inode->i_ino, block, max_blocks);
+ inode->i_ino, map.m_lblk, map.m_len);
}
ext4_mark_inode_dirty(handle, inode);
ret2 = ext4_journal_stop(handle);
@@ -3898,7 +3937,7 @@
int error = 0;
/* fallback to generic here if not in extents fmt */
- if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL))
+ if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
return generic_block_fiemap(inode, fieinfo, start, len,
ext4_get_block);
diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index d0776e4..5313ae4 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -66,7 +66,7 @@
* is smaller than s_maxbytes, which is for extent-mapped files.
*/
- if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)) {
+ if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) {
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
size_t length = iov_length(iov, nr_segs);
diff --git a/fs/ext4/fsync.c b/fs/ext4/fsync.c
index ef3d980..592adf2 100644
--- a/fs/ext4/fsync.c
+++ b/fs/ext4/fsync.c
@@ -35,6 +35,29 @@
#include <trace/events/ext4.h>
/*
+ * If we're not journaling and this is a just-created file, we have to
+ * sync our parent directory (if it was freshly created) since
+ * otherwise it will only be written by writeback, leaving a huge
+ * window during which a crash may lose the file. This may apply for
+ * the parent directory's parent as well, and so on recursively, if
+ * they are also freshly created.
+ */
+static void ext4_sync_parent(struct inode *inode)
+{
+ struct dentry *dentry = NULL;
+
+ while (inode && ext4_test_inode_state(inode, EXT4_STATE_NEWENTRY)) {
+ ext4_clear_inode_state(inode, EXT4_STATE_NEWENTRY);
+ dentry = list_entry(inode->i_dentry.next,
+ struct dentry, d_alias);
+ if (!dentry || !dentry->d_parent || !dentry->d_parent->d_inode)
+ break;
+ inode = dentry->d_parent->d_inode;
+ sync_mapping_buffers(inode->i_mapping);
+ }
+}
+
+/*
* akpm: A new design for ext4_sync_file().
*
* This is only called from sys_fsync(), sys_fdatasync() and sys_msync().
@@ -48,9 +71,9 @@
* i_mutex lock is held when entering and exiting this function
*/
-int ext4_sync_file(struct file *file, struct dentry *dentry, int datasync)
+int ext4_sync_file(struct file *file, int datasync)
{
- struct inode *inode = dentry->d_inode;
+ struct inode *inode = file->f_mapping->host;
struct ext4_inode_info *ei = EXT4_I(inode);
journal_t *journal = EXT4_SB(inode->i_sb)->s_journal;
int ret;
@@ -58,7 +81,7 @@
J_ASSERT(ext4_journal_current_handle() == NULL);
- trace_ext4_sync_file(file, dentry, datasync);
+ trace_ext4_sync_file(file, datasync);
if (inode->i_sb->s_flags & MS_RDONLY)
return 0;
@@ -66,9 +89,13 @@
ret = flush_completed_IO(inode);
if (ret < 0)
return ret;
-
- if (!journal)
- return simple_fsync(file, dentry, datasync);
+
+ if (!journal) {
+ ret = generic_file_fsync(file, datasync);
+ if (!ret && !list_empty(&inode->i_dentry))
+ ext4_sync_parent(inode);
+ return ret;
+ }
/*
* data=writeback,ordered:
@@ -102,7 +129,7 @@
(journal->j_flags & JBD2_BARRIER))
blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL,
NULL, BLKDEV_IFL_WAIT);
- jbd2_log_wait_commit(journal, commit_tid);
+ ret = jbd2_log_wait_commit(journal, commit_tid);
} else if (journal->j_flags & JBD2_BARRIER)
blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL,
BLKDEV_IFL_WAIT);
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index 1a0e183..25c4b31 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -240,56 +240,49 @@
if (fatal)
goto error_return;
- /* Ok, now we can actually update the inode bitmaps.. */
- cleared = ext4_clear_bit_atomic(ext4_group_lock_ptr(sb, block_group),
- bit, bitmap_bh->b_data);
- if (!cleared)
- ext4_error(sb, "bit already cleared for inode %lu", ino);
- else {
- gdp = ext4_get_group_desc(sb, block_group, &bh2);
-
+ fatal = -ESRCH;
+ gdp = ext4_get_group_desc(sb, block_group, &bh2);
+ if (gdp) {
BUFFER_TRACE(bh2, "get_write_access");
fatal = ext4_journal_get_write_access(handle, bh2);
- if (fatal) goto error_return;
-
- if (gdp) {
- ext4_lock_group(sb, block_group);
- count = ext4_free_inodes_count(sb, gdp) + 1;
- ext4_free_inodes_set(sb, gdp, count);
- if (is_directory) {
- count = ext4_used_dirs_count(sb, gdp) - 1;
- ext4_used_dirs_set(sb, gdp, count);
- if (sbi->s_log_groups_per_flex) {
- ext4_group_t f;
-
- f = ext4_flex_group(sbi, block_group);
- atomic_dec(&sbi->s_flex_groups[f].used_dirs);
- }
-
- }
- gdp->bg_checksum = ext4_group_desc_csum(sbi,
- block_group, gdp);
- ext4_unlock_group(sb, block_group);
- percpu_counter_inc(&sbi->s_freeinodes_counter);
- if (is_directory)
- percpu_counter_dec(&sbi->s_dirs_counter);
-
- if (sbi->s_log_groups_per_flex) {
- ext4_group_t f;
-
- f = ext4_flex_group(sbi, block_group);
- atomic_inc(&sbi->s_flex_groups[f].free_inodes);
- }
- }
- BUFFER_TRACE(bh2, "call ext4_handle_dirty_metadata");
- err = ext4_handle_dirty_metadata(handle, NULL, bh2);
- if (!fatal) fatal = err;
}
- BUFFER_TRACE(bitmap_bh, "call ext4_handle_dirty_metadata");
- err = ext4_handle_dirty_metadata(handle, NULL, bitmap_bh);
- if (!fatal)
- fatal = err;
- sb->s_dirt = 1;
+ ext4_lock_group(sb, block_group);
+ cleared = ext4_clear_bit(bit, bitmap_bh->b_data);
+ if (fatal || !cleared) {
+ ext4_unlock_group(sb, block_group);
+ goto out;
+ }
+
+ count = ext4_free_inodes_count(sb, gdp) + 1;
+ ext4_free_inodes_set(sb, gdp, count);
+ if (is_directory) {
+ count = ext4_used_dirs_count(sb, gdp) - 1;
+ ext4_used_dirs_set(sb, gdp, count);
+ percpu_counter_dec(&sbi->s_dirs_counter);
+ }
+ gdp->bg_checksum = ext4_group_desc_csum(sbi, block_group, gdp);
+ ext4_unlock_group(sb, block_group);
+
+ percpu_counter_inc(&sbi->s_freeinodes_counter);
+ if (sbi->s_log_groups_per_flex) {
+ ext4_group_t f = ext4_flex_group(sbi, block_group);
+
+ atomic_inc(&sbi->s_flex_groups[f].free_inodes);
+ if (is_directory)
+ atomic_dec(&sbi->s_flex_groups[f].used_dirs);
+ }
+ BUFFER_TRACE(bh2, "call ext4_handle_dirty_metadata");
+ fatal = ext4_handle_dirty_metadata(handle, NULL, bh2);
+out:
+ if (cleared) {
+ BUFFER_TRACE(bitmap_bh, "call ext4_handle_dirty_metadata");
+ err = ext4_handle_dirty_metadata(handle, NULL, bitmap_bh);
+ if (!fatal)
+ fatal = err;
+ sb->s_dirt = 1;
+ } else
+ ext4_error(sb, "bit already cleared for inode %lu", ino);
+
error_return:
brelse(bitmap_bh);
ext4_std_error(sb, fatal);
@@ -499,7 +492,7 @@
if (S_ISDIR(mode) &&
((parent == sb->s_root->d_inode) ||
- (EXT4_I(parent)->i_flags & EXT4_TOPDIR_FL))) {
+ (ext4_test_inode_flag(parent, EXT4_INODE_TOPDIR)))) {
int best_ndir = inodes_per_group;
int ret = -1;
@@ -1041,7 +1034,7 @@
if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_EXTENTS)) {
/* set extent flag only for directory, file and normal symlink*/
if (S_ISDIR(mode) || S_ISREG(mode) || S_ISLNK(mode)) {
- EXT4_I(inode)->i_flags |= EXT4_EXTENTS_FL;
+ ext4_set_inode_flag(inode, EXT4_INODE_EXTENTS);
ext4_ext_tree_init(handle, inode);
}
}
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 3e0f6af..42272d6 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -149,7 +149,7 @@
int ret;
/*
- * Drop i_data_sem to avoid deadlock with ext4_get_blocks At this
+ * Drop i_data_sem to avoid deadlock with ext4_map_blocks. At this
* moment, get_block can be called only for blocks inside i_size since
* page cache has been already dropped and writes are blocked by
* i_mutex. So we can safely drop the i_data_sem here.
@@ -348,9 +348,8 @@
if (blk &&
unlikely(!ext4_data_block_valid(EXT4_SB(inode->i_sb),
blk, 1))) {
- __ext4_error(inode->i_sb, function,
- "invalid block reference %u "
- "in inode #%lu", blk, inode->i_ino);
+ ext4_error_inode(function, inode,
+ "invalid block reference %u", blk);
return -EIO;
}
}
@@ -785,7 +784,7 @@
/* Allocation failed, free what we already allocated */
ext4_free_blocks(handle, inode, 0, new_blocks[0], 1, 0);
for (i = 1; i <= n ; i++) {
- /*
+ /*
* branch[i].bh is newly allocated, so there is no
* need to revoke the block, which is why we don't
* need to set EXT4_FREE_BLOCKS_METADATA.
@@ -875,7 +874,7 @@
err_out:
for (i = 1; i <= num; i++) {
- /*
+ /*
* branch[i].bh is newly allocated, so there is no
* need to revoke the block, which is why we don't
* need to set EXT4_FREE_BLOCKS_METADATA.
@@ -890,9 +889,9 @@
}
/*
- * The ext4_ind_get_blocks() function handles non-extents inodes
+ * The ext4_ind_map_blocks() function handles non-extents inodes
* (i.e., using the traditional indirect/double-indirect i_blocks
- * scheme) for ext4_get_blocks().
+ * scheme) for ext4_map_blocks().
*
* Allocation strategy is simple: if we have to allocate something, we will
* have to go the whole way to leaf. So let's do it before attaching anything
@@ -917,9 +916,8 @@
* down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system
* blocks.
*/
-static int ext4_ind_get_blocks(handle_t *handle, struct inode *inode,
- ext4_lblk_t iblock, unsigned int maxblocks,
- struct buffer_head *bh_result,
+static int ext4_ind_map_blocks(handle_t *handle, struct inode *inode,
+ struct ext4_map_blocks *map,
int flags)
{
int err = -EIO;
@@ -933,9 +931,9 @@
int count = 0;
ext4_fsblk_t first_block = 0;
- J_ASSERT(!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL));
+ J_ASSERT(!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)));
J_ASSERT(handle != NULL || (flags & EXT4_GET_BLOCKS_CREATE) == 0);
- depth = ext4_block_to_path(inode, iblock, offsets,
+ depth = ext4_block_to_path(inode, map->m_lblk, offsets,
&blocks_to_boundary);
if (depth == 0)
@@ -946,10 +944,9 @@
/* Simplest case - block found, no allocation needed */
if (!partial) {
first_block = le32_to_cpu(chain[depth - 1].key);
- clear_buffer_new(bh_result);
count++;
/*map more blocks*/
- while (count < maxblocks && count <= blocks_to_boundary) {
+ while (count < map->m_len && count <= blocks_to_boundary) {
ext4_fsblk_t blk;
blk = le32_to_cpu(*(chain[depth-1].p + count));
@@ -969,7 +966,7 @@
/*
* Okay, we need to do block allocation.
*/
- goal = ext4_find_goal(inode, iblock, partial);
+ goal = ext4_find_goal(inode, map->m_lblk, partial);
/* the number of blocks need to allocate for [d,t]indirect blocks */
indirect_blks = (chain + depth) - partial - 1;
@@ -979,11 +976,11 @@
* direct blocks to allocate for this branch.
*/
count = ext4_blks_to_allocate(partial, indirect_blks,
- maxblocks, blocks_to_boundary);
+ map->m_len, blocks_to_boundary);
/*
* Block out ext4_truncate while we alter the tree
*/
- err = ext4_alloc_branch(handle, inode, iblock, indirect_blks,
+ err = ext4_alloc_branch(handle, inode, map->m_lblk, indirect_blks,
&count, goal,
offsets + (partial - chain), partial);
@@ -995,18 +992,20 @@
* may need to return -EAGAIN upwards in the worst case. --sct
*/
if (!err)
- err = ext4_splice_branch(handle, inode, iblock,
+ err = ext4_splice_branch(handle, inode, map->m_lblk,
partial, indirect_blks, count);
if (err)
goto cleanup;
- set_buffer_new(bh_result);
+ map->m_flags |= EXT4_MAP_NEW;
ext4_update_inode_fsync_trans(handle, inode, 1);
got_it:
- map_bh(bh_result, inode->i_sb, le32_to_cpu(chain[depth-1].key));
+ map->m_flags |= EXT4_MAP_MAPPED;
+ map->m_pblk = le32_to_cpu(chain[depth-1].key);
+ map->m_len = count;
if (count > blocks_to_boundary)
- set_buffer_boundary(bh_result);
+ map->m_flags |= EXT4_MAP_BOUNDARY;
err = count;
/* Clean up and exit */
partial = chain + depth - 1; /* the whole chain */
@@ -1016,7 +1015,6 @@
brelse(partial->bh);
partial--;
}
- BUFFER_TRACE(bh_result, "returned");
out:
return err;
}
@@ -1061,7 +1059,7 @@
*/
static int ext4_calc_metadata_amount(struct inode *inode, sector_t lblock)
{
- if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)
+ if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
return ext4_ext_calc_metadata_amount(inode, lblock);
return ext4_indirect_calc_metadata_amount(inode, lblock);
@@ -1076,7 +1074,6 @@
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
struct ext4_inode_info *ei = EXT4_I(inode);
- int mdb_free = 0, allocated_meta_blocks = 0;
spin_lock(&ei->i_block_reservation_lock);
trace_ext4_da_update_reserve_space(inode, used);
@@ -1091,11 +1088,10 @@
/* Update per-inode reservations */
ei->i_reserved_data_blocks -= used;
- used += ei->i_allocated_meta_blocks;
ei->i_reserved_meta_blocks -= ei->i_allocated_meta_blocks;
- allocated_meta_blocks = ei->i_allocated_meta_blocks;
+ percpu_counter_sub(&sbi->s_dirtyblocks_counter,
+ used + ei->i_allocated_meta_blocks);
ei->i_allocated_meta_blocks = 0;
- percpu_counter_sub(&sbi->s_dirtyblocks_counter, used);
if (ei->i_reserved_data_blocks == 0) {
/*
@@ -1103,30 +1099,23 @@
* only when we have written all of the delayed
* allocation blocks.
*/
- mdb_free = ei->i_reserved_meta_blocks;
+ percpu_counter_sub(&sbi->s_dirtyblocks_counter,
+ ei->i_reserved_meta_blocks);
ei->i_reserved_meta_blocks = 0;
ei->i_da_metadata_calc_len = 0;
- percpu_counter_sub(&sbi->s_dirtyblocks_counter, mdb_free);
}
spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
- /* Update quota subsystem */
- if (quota_claim) {
+ /* Update quota subsystem for data blocks */
+ if (quota_claim)
dquot_claim_block(inode, used);
- if (mdb_free)
- dquot_release_reservation_block(inode, mdb_free);
- } else {
+ else {
/*
* We did fallocate with an offset that is already delayed
* allocated. So on delayed allocated writeback we should
- * not update the quota for allocated blocks. But then
- * converting an fallocate region to initialized region would
- * have caused a metadata allocation. So claim quota for
- * that
+ * not re-claim the quota for fallocated blocks.
*/
- if (allocated_meta_blocks)
- dquot_claim_block(inode, allocated_meta_blocks);
- dquot_release_reservation_block(inode, mdb_free + used);
+ dquot_release_reservation_block(inode, used);
}
/*
@@ -1139,15 +1128,15 @@
ext4_discard_preallocations(inode);
}
-static int check_block_validity(struct inode *inode, const char *msg,
- sector_t logical, sector_t phys, int len)
+static int check_block_validity(struct inode *inode, const char *func,
+ struct ext4_map_blocks *map)
{
- if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), phys, len)) {
- __ext4_error(inode->i_sb, msg,
- "inode #%lu logical block %llu mapped to %llu "
- "(size %d)", inode->i_ino,
- (unsigned long long) logical,
- (unsigned long long) phys, len);
+ if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), map->m_pblk,
+ map->m_len)) {
+ ext4_error_inode(func, inode,
+ "lblock %lu mapped to illegal pblock %llu "
+ "(length %d)", (unsigned long) map->m_lblk,
+ map->m_pblk, map->m_len);
return -EIO;
}
return 0;
@@ -1212,15 +1201,15 @@
}
/*
- * The ext4_get_blocks() function tries to look up the requested blocks,
+ * The ext4_map_blocks() function tries to look up the requested blocks,
* and returns if the blocks are already mapped.
*
* Otherwise it takes the write lock of the i_data_sem and allocate blocks
* and store the allocated blocks in the result buffer head and mark it
* mapped.
*
- * If file type is extents based, it will call ext4_ext_get_blocks(),
- * Otherwise, call with ext4_ind_get_blocks() to handle indirect mapping
+ * If file type is extents based, it will call ext4_ext_map_blocks(),
+ * Otherwise, call with ext4_ind_map_blocks() to handle indirect mapping
* based files
*
* On success, it returns the number of blocks being mapped or allocate.
@@ -1233,35 +1222,29 @@
*
* It returns the error in case of allocation failure.
*/
-int ext4_get_blocks(handle_t *handle, struct inode *inode, sector_t block,
- unsigned int max_blocks, struct buffer_head *bh,
- int flags)
+int ext4_map_blocks(handle_t *handle, struct inode *inode,
+ struct ext4_map_blocks *map, int flags)
{
int retval;
- clear_buffer_mapped(bh);
- clear_buffer_unwritten(bh);
-
- ext_debug("ext4_get_blocks(): inode %lu, flag %d, max_blocks %u,"
- "logical block %lu\n", inode->i_ino, flags, max_blocks,
- (unsigned long)block);
+ map->m_flags = 0;
+ ext_debug("ext4_map_blocks(): inode %lu, flag %d, max_blocks %u,"
+ "logical block %lu\n", inode->i_ino, flags, map->m_len,
+ (unsigned long) map->m_lblk);
/*
* Try to see if we can get the block without requesting a new
* file system block.
*/
down_read((&EXT4_I(inode)->i_data_sem));
- if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) {
- retval = ext4_ext_get_blocks(handle, inode, block, max_blocks,
- bh, 0);
+ if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) {
+ retval = ext4_ext_map_blocks(handle, inode, map, 0);
} else {
- retval = ext4_ind_get_blocks(handle, inode, block, max_blocks,
- bh, 0);
+ retval = ext4_ind_map_blocks(handle, inode, map, 0);
}
up_read((&EXT4_I(inode)->i_data_sem));
- if (retval > 0 && buffer_mapped(bh)) {
- int ret = check_block_validity(inode, "file system corruption",
- block, bh->b_blocknr, retval);
+ if (retval > 0 && map->m_flags & EXT4_MAP_MAPPED) {
+ int ret = check_block_validity(inode, __func__, map);
if (ret != 0)
return ret;
}
@@ -1277,7 +1260,7 @@
* ext4_ext_get_block() returns th create = 0
* with buffer head unmapped.
*/
- if (retval > 0 && buffer_mapped(bh))
+ if (retval > 0 && map->m_flags & EXT4_MAP_MAPPED)
return retval;
/*
@@ -1290,7 +1273,7 @@
* of BH_Unwritten and BH_Mapped flags being simultaneously
* set on the buffer_head.
*/
- clear_buffer_unwritten(bh);
+ map->m_flags &= ~EXT4_MAP_UNWRITTEN;
/*
* New blocks allocate and/or writing to uninitialized extent
@@ -1312,14 +1295,12 @@
* We need to check for EXT4 here because migrate
* could have changed the inode type in between
*/
- if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) {
- retval = ext4_ext_get_blocks(handle, inode, block, max_blocks,
- bh, flags);
+ if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) {
+ retval = ext4_ext_map_blocks(handle, inode, map, flags);
} else {
- retval = ext4_ind_get_blocks(handle, inode, block,
- max_blocks, bh, flags);
+ retval = ext4_ind_map_blocks(handle, inode, map, flags);
- if (retval > 0 && buffer_new(bh)) {
+ if (retval > 0 && map->m_flags & EXT4_MAP_NEW) {
/*
* We allocated new blocks which will result in
* i_data's format changing. Force the migrate
@@ -1342,10 +1323,10 @@
EXT4_I(inode)->i_delalloc_reserved_flag = 0;
up_write((&EXT4_I(inode)->i_data_sem));
- if (retval > 0 && buffer_mapped(bh)) {
- int ret = check_block_validity(inode, "file system "
- "corruption after allocation",
- block, bh->b_blocknr, retval);
+ if (retval > 0 && map->m_flags & EXT4_MAP_MAPPED) {
+ int ret = check_block_validity(inode,
+ "ext4_map_blocks_after_alloc",
+ map);
if (ret != 0)
return ret;
}
@@ -1355,109 +1336,109 @@
/* Maximum number of blocks we map for direct IO at once. */
#define DIO_MAX_BLOCKS 4096
-int ext4_get_block(struct inode *inode, sector_t iblock,
- struct buffer_head *bh_result, int create)
+static int _ext4_get_block(struct inode *inode, sector_t iblock,
+ struct buffer_head *bh, int flags)
{
handle_t *handle = ext4_journal_current_handle();
+ struct ext4_map_blocks map;
int ret = 0, started = 0;
- unsigned max_blocks = bh_result->b_size >> inode->i_blkbits;
int dio_credits;
- if (create && !handle) {
+ map.m_lblk = iblock;
+ map.m_len = bh->b_size >> inode->i_blkbits;
+
+ if (flags && !handle) {
/* Direct IO write... */
- if (max_blocks > DIO_MAX_BLOCKS)
- max_blocks = DIO_MAX_BLOCKS;
- dio_credits = ext4_chunk_trans_blocks(inode, max_blocks);
+ if (map.m_len > DIO_MAX_BLOCKS)
+ map.m_len = DIO_MAX_BLOCKS;
+ dio_credits = ext4_chunk_trans_blocks(inode, map.m_len);
handle = ext4_journal_start(inode, dio_credits);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
- goto out;
+ return ret;
}
started = 1;
}
- ret = ext4_get_blocks(handle, inode, iblock, max_blocks, bh_result,
- create ? EXT4_GET_BLOCKS_CREATE : 0);
+ ret = ext4_map_blocks(handle, inode, &map, flags);
if (ret > 0) {
- bh_result->b_size = (ret << inode->i_blkbits);
+ map_bh(bh, inode->i_sb, map.m_pblk);
+ bh->b_state = (bh->b_state & ~EXT4_MAP_FLAGS) | map.m_flags;
+ bh->b_size = inode->i_sb->s_blocksize * map.m_len;
ret = 0;
}
if (started)
ext4_journal_stop(handle);
-out:
return ret;
}
+int ext4_get_block(struct inode *inode, sector_t iblock,
+ struct buffer_head *bh, int create)
+{
+ return _ext4_get_block(inode, iblock, bh,
+ create ? EXT4_GET_BLOCKS_CREATE : 0);
+}
+
/*
* `handle' can be NULL if create is zero
*/
struct buffer_head *ext4_getblk(handle_t *handle, struct inode *inode,
ext4_lblk_t block, int create, int *errp)
{
- struct buffer_head dummy;
+ struct ext4_map_blocks map;
+ struct buffer_head *bh;
int fatal = 0, err;
- int flags = 0;
J_ASSERT(handle != NULL || create == 0);
- dummy.b_state = 0;
- dummy.b_blocknr = -1000;
- buffer_trace_init(&dummy.b_history);
- if (create)
- flags |= EXT4_GET_BLOCKS_CREATE;
- err = ext4_get_blocks(handle, inode, block, 1, &dummy, flags);
- /*
- * ext4_get_blocks() returns number of blocks mapped. 0 in
- * case of a HOLE.
- */
- if (err > 0) {
- if (err > 1)
- WARN_ON(1);
- err = 0;
- }
- *errp = err;
- if (!err && buffer_mapped(&dummy)) {
- struct buffer_head *bh;
- bh = sb_getblk(inode->i_sb, dummy.b_blocknr);
- if (!bh) {
- *errp = -EIO;
- goto err;
- }
- if (buffer_new(&dummy)) {
- J_ASSERT(create != 0);
- J_ASSERT(handle != NULL);
+ map.m_lblk = block;
+ map.m_len = 1;
+ err = ext4_map_blocks(handle, inode, &map,
+ create ? EXT4_GET_BLOCKS_CREATE : 0);
- /*
- * Now that we do not always journal data, we should
- * keep in mind whether this should always journal the
- * new buffer as metadata. For now, regular file
- * writes use ext4_get_block instead, so it's not a
- * problem.
- */
- lock_buffer(bh);
- BUFFER_TRACE(bh, "call get_create_access");
- fatal = ext4_journal_get_create_access(handle, bh);
- if (!fatal && !buffer_uptodate(bh)) {
- memset(bh->b_data, 0, inode->i_sb->s_blocksize);
- set_buffer_uptodate(bh);
- }
- unlock_buffer(bh);
- BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata");
- err = ext4_handle_dirty_metadata(handle, inode, bh);
- if (!fatal)
- fatal = err;
- } else {
- BUFFER_TRACE(bh, "not a new buffer");
- }
- if (fatal) {
- *errp = fatal;
- brelse(bh);
- bh = NULL;
- }
- return bh;
+ if (err < 0)
+ *errp = err;
+ if (err <= 0)
+ return NULL;
+ *errp = 0;
+
+ bh = sb_getblk(inode->i_sb, map.m_pblk);
+ if (!bh) {
+ *errp = -EIO;
+ return NULL;
}
-err:
- return NULL;
+ if (map.m_flags & EXT4_MAP_NEW) {
+ J_ASSERT(create != 0);
+ J_ASSERT(handle != NULL);
+
+ /*
+ * Now that we do not always journal data, we should
+ * keep in mind whether this should always journal the
+ * new buffer as metadata. For now, regular file
+ * writes use ext4_get_block instead, so it's not a
+ * problem.
+ */
+ lock_buffer(bh);
+ BUFFER_TRACE(bh, "call get_create_access");
+ fatal = ext4_journal_get_create_access(handle, bh);
+ if (!fatal && !buffer_uptodate(bh)) {
+ memset(bh->b_data, 0, inode->i_sb->s_blocksize);
+ set_buffer_uptodate(bh);
+ }
+ unlock_buffer(bh);
+ BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata");
+ err = ext4_handle_dirty_metadata(handle, inode, bh);
+ if (!fatal)
+ fatal = err;
+ } else {
+ BUFFER_TRACE(bh, "not a new buffer");
+ }
+ if (fatal) {
+ *errp = fatal;
+ brelse(bh);
+ bh = NULL;
+ }
+ return bh;
}
struct buffer_head *ext4_bread(handle_t *handle, struct inode *inode,
@@ -1860,7 +1841,7 @@
int retries = 0;
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
struct ext4_inode_info *ei = EXT4_I(inode);
- unsigned long md_needed, md_reserved;
+ unsigned long md_needed;
int ret;
/*
@@ -1870,22 +1851,24 @@
*/
repeat:
spin_lock(&ei->i_block_reservation_lock);
- md_reserved = ei->i_reserved_meta_blocks;
md_needed = ext4_calc_metadata_amount(inode, lblock);
trace_ext4_da_reserve_space(inode, md_needed);
spin_unlock(&ei->i_block_reservation_lock);
/*
- * Make quota reservation here to prevent quota overflow
- * later. Real quota accounting is done at pages writeout
- * time.
+ * We will charge metadata quota at writeout time; this saves
+ * us from metadata over-estimation, though we may go over by
+ * a small amount in the end. Here we just reserve for data.
*/
- ret = dquot_reserve_block(inode, md_needed + 1);
+ ret = dquot_reserve_block(inode, 1);
if (ret)
return ret;
-
+ /*
+ * We do still charge estimated metadata to the sb though;
+ * we cannot afford to run out of free blocks.
+ */
if (ext4_claim_free_blocks(sbi, md_needed + 1)) {
- dquot_release_reservation_block(inode, md_needed + 1);
+ dquot_release_reservation_block(inode, 1);
if (ext4_should_retry_alloc(inode->i_sb, &retries)) {
yield();
goto repeat;
@@ -1910,6 +1893,7 @@
spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
+ trace_ext4_da_release_space(inode, to_free);
if (unlikely(to_free > ei->i_reserved_data_blocks)) {
/*
* if there aren't enough reserved blocks, then the
@@ -1932,12 +1916,13 @@
* only when we have written all of the delayed
* allocation blocks.
*/
- to_free += ei->i_reserved_meta_blocks;
+ percpu_counter_sub(&sbi->s_dirtyblocks_counter,
+ ei->i_reserved_meta_blocks);
ei->i_reserved_meta_blocks = 0;
ei->i_da_metadata_calc_len = 0;
}
- /* update fs dirty blocks counter */
+ /* update fs dirty data blocks counter */
percpu_counter_sub(&sbi->s_dirtyblocks_counter, to_free);
spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
@@ -2042,28 +2027,23 @@
/*
* mpage_put_bnr_to_bhs - walk blocks and assign them actual numbers
*
- * @mpd->inode - inode to walk through
- * @exbh->b_blocknr - first block on a disk
- * @exbh->b_size - amount of space in bytes
- * @logical - first logical block to start assignment with
- *
* the function goes through all passed space and put actual disk
* block numbers into buffer heads, dropping BH_Delay and BH_Unwritten
*/
-static void mpage_put_bnr_to_bhs(struct mpage_da_data *mpd, sector_t logical,
- struct buffer_head *exbh)
+static void mpage_put_bnr_to_bhs(struct mpage_da_data *mpd,
+ struct ext4_map_blocks *map)
{
struct inode *inode = mpd->inode;
struct address_space *mapping = inode->i_mapping;
- int blocks = exbh->b_size >> inode->i_blkbits;
- sector_t pblock = exbh->b_blocknr, cur_logical;
+ int blocks = map->m_len;
+ sector_t pblock = map->m_pblk, cur_logical;
struct buffer_head *head, *bh;
pgoff_t index, end;
struct pagevec pvec;
int nr_pages, i;
- index = logical >> (PAGE_CACHE_SHIFT - inode->i_blkbits);
- end = (logical + blocks - 1) >> (PAGE_CACHE_SHIFT - inode->i_blkbits);
+ index = map->m_lblk >> (PAGE_CACHE_SHIFT - inode->i_blkbits);
+ end = (map->m_lblk + blocks - 1) >> (PAGE_CACHE_SHIFT - inode->i_blkbits);
cur_logical = index << (PAGE_CACHE_SHIFT - inode->i_blkbits);
pagevec_init(&pvec, 0);
@@ -2090,17 +2070,16 @@
/* skip blocks out of the range */
do {
- if (cur_logical >= logical)
+ if (cur_logical >= map->m_lblk)
break;
cur_logical++;
} while ((bh = bh->b_this_page) != head);
do {
- if (cur_logical >= logical + blocks)
+ if (cur_logical >= map->m_lblk + blocks)
break;
- if (buffer_delay(bh) ||
- buffer_unwritten(bh)) {
+ if (buffer_delay(bh) || buffer_unwritten(bh)) {
BUG_ON(bh->b_bdev != inode->i_sb->s_bdev);
@@ -2119,7 +2098,7 @@
} else if (buffer_mapped(bh))
BUG_ON(bh->b_blocknr != pblock);
- if (buffer_uninit(exbh))
+ if (map->m_flags & EXT4_MAP_UNINIT)
set_buffer_uninit(bh);
cur_logical++;
pblock++;
@@ -2130,21 +2109,6 @@
}
-/*
- * __unmap_underlying_blocks - just a helper function to unmap
- * set of blocks described by @bh
- */
-static inline void __unmap_underlying_blocks(struct inode *inode,
- struct buffer_head *bh)
-{
- struct block_device *bdev = inode->i_sb->s_bdev;
- int blocks, i;
-
- blocks = bh->b_size >> inode->i_blkbits;
- for (i = 0; i < blocks; i++)
- unmap_underlying_metadata(bdev, bh->b_blocknr + i);
-}
-
static void ext4_da_block_invalidatepages(struct mpage_da_data *mpd,
sector_t logical, long blk_cnt)
{
@@ -2206,7 +2170,7 @@
static int mpage_da_map_blocks(struct mpage_da_data *mpd)
{
int err, blks, get_blocks_flags;
- struct buffer_head new;
+ struct ext4_map_blocks map;
sector_t next = mpd->b_blocknr;
unsigned max_blocks = mpd->b_size >> mpd->inode->i_blkbits;
loff_t disksize = EXT4_I(mpd->inode)->i_disksize;
@@ -2247,15 +2211,15 @@
* EXT4_GET_BLOCKS_DELALLOC_RESERVE so the delalloc accounting
* variables are updated after the blocks have been allocated.
*/
- new.b_state = 0;
+ map.m_lblk = next;
+ map.m_len = max_blocks;
get_blocks_flags = EXT4_GET_BLOCKS_CREATE;
if (ext4_should_dioread_nolock(mpd->inode))
get_blocks_flags |= EXT4_GET_BLOCKS_IO_CREATE_EXT;
if (mpd->b_state & (1 << BH_Delay))
get_blocks_flags |= EXT4_GET_BLOCKS_DELALLOC_RESERVE;
- blks = ext4_get_blocks(handle, mpd->inode, next, max_blocks,
- &new, get_blocks_flags);
+ blks = ext4_map_blocks(handle, mpd->inode, &map, get_blocks_flags);
if (blks < 0) {
err = blks;
/*
@@ -2282,7 +2246,7 @@
ext4_msg(mpd->inode->i_sb, KERN_CRIT,
"delayed block allocation failed for inode %lu at "
"logical offset %llu with max blocks %zd with "
- "error %d\n", mpd->inode->i_ino,
+ "error %d", mpd->inode->i_ino,
(unsigned long long) next,
mpd->b_size >> mpd->inode->i_blkbits, err);
printk(KERN_CRIT "This should not happen!! "
@@ -2297,10 +2261,13 @@
}
BUG_ON(blks == 0);
- new.b_size = (blks << mpd->inode->i_blkbits);
+ if (map.m_flags & EXT4_MAP_NEW) {
+ struct block_device *bdev = mpd->inode->i_sb->s_bdev;
+ int i;
- if (buffer_new(&new))
- __unmap_underlying_blocks(mpd->inode, &new);
+ for (i = 0; i < map.m_len; i++)
+ unmap_underlying_metadata(bdev, map.m_pblk + i);
+ }
/*
* If blocks are delayed marked, we need to
@@ -2308,7 +2275,7 @@
*/
if ((mpd->b_state & (1 << BH_Delay)) ||
(mpd->b_state & (1 << BH_Unwritten)))
- mpage_put_bnr_to_bhs(mpd, next, &new);
+ mpage_put_bnr_to_bhs(mpd, &map);
if (ext4_should_order_data(mpd->inode)) {
err = ext4_jbd2_file_inode(handle, mpd->inode);
@@ -2349,8 +2316,17 @@
sector_t next;
int nrblocks = mpd->b_size >> mpd->inode->i_blkbits;
+ /*
+ * XXX Don't go larger than mballoc is willing to allocate
+ * This is a stopgap solution. We eventually need to fold
+ * mpage_da_submit_io() into this function and then call
+ * ext4_get_blocks() multiple times in a loop
+ */
+ if (nrblocks >= 8*1024*1024/mpd->inode->i_sb->s_blocksize)
+ goto flush_it;
+
/* check if thereserved journal credits might overflow */
- if (!(EXT4_I(mpd->inode)->i_flags & EXT4_EXTENTS_FL)) {
+ if (!(ext4_test_inode_flag(mpd->inode, EXT4_INODE_EXTENTS))) {
if (nrblocks >= EXT4_MAX_TRANS_DATA) {
/*
* With non-extent format we are limited by the journal
@@ -2423,17 +2399,6 @@
struct buffer_head *bh, *head;
sector_t logical;
- if (mpd->io_done) {
- /*
- * Rest of the page in the page_vec
- * redirty then and skip then. We will
- * try to write them again after
- * starting a new transaction
- */
- redirty_page_for_writepage(wbc, page);
- unlock_page(page);
- return MPAGE_DA_EXTENT_TAIL;
- }
/*
* Can we merge this page to current extent?
*/
@@ -2528,8 +2493,9 @@
* initialized properly.
*/
static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock,
- struct buffer_head *bh_result, int create)
+ struct buffer_head *bh, int create)
{
+ struct ext4_map_blocks map;
int ret = 0;
sector_t invalid_block = ~((sector_t) 0xffff);
@@ -2537,16 +2503,22 @@
invalid_block = ~0;
BUG_ON(create == 0);
- BUG_ON(bh_result->b_size != inode->i_sb->s_blocksize);
+ BUG_ON(bh->b_size != inode->i_sb->s_blocksize);
+
+ map.m_lblk = iblock;
+ map.m_len = 1;
/*
* first, we need to know whether the block is allocated already
* preallocated blocks are unmapped but should treated
* the same as allocated blocks.
*/
- ret = ext4_get_blocks(NULL, inode, iblock, 1, bh_result, 0);
- if ((ret == 0) && !buffer_delay(bh_result)) {
- /* the block isn't (pre)allocated yet, let's reserve space */
+ ret = ext4_map_blocks(NULL, inode, &map, 0);
+ if (ret < 0)
+ return ret;
+ if (ret == 0) {
+ if (buffer_delay(bh))
+ return 0; /* Not sure this could or should happen */
/*
* XXX: __block_prepare_write() unmaps passed block,
* is it OK?
@@ -2556,26 +2528,26 @@
/* not enough space to reserve */
return ret;
- map_bh(bh_result, inode->i_sb, invalid_block);
- set_buffer_new(bh_result);
- set_buffer_delay(bh_result);
- } else if (ret > 0) {
- bh_result->b_size = (ret << inode->i_blkbits);
- if (buffer_unwritten(bh_result)) {
- /* A delayed write to unwritten bh should
- * be marked new and mapped. Mapped ensures
- * that we don't do get_block multiple times
- * when we write to the same offset and new
- * ensures that we do proper zero out for
- * partial write.
- */
- set_buffer_new(bh_result);
- set_buffer_mapped(bh_result);
- }
- ret = 0;
+ map_bh(bh, inode->i_sb, invalid_block);
+ set_buffer_new(bh);
+ set_buffer_delay(bh);
+ return 0;
}
- return ret;
+ map_bh(bh, inode->i_sb, map.m_pblk);
+ bh->b_state = (bh->b_state & ~EXT4_MAP_FLAGS) | map.m_flags;
+
+ if (buffer_unwritten(bh)) {
+ /* A delayed write to unwritten bh should be marked
+ * new and mapped. Mapped ensures that we don't do
+ * get_block multiple times when we write to the same
+ * offset and new ensures that we do proper zero out
+ * for partial write.
+ */
+ set_buffer_new(bh);
+ set_buffer_mapped(bh);
+ }
+ return 0;
}
/*
@@ -2597,21 +2569,8 @@
static int noalloc_get_block_write(struct inode *inode, sector_t iblock,
struct buffer_head *bh_result, int create)
{
- int ret = 0;
- unsigned max_blocks = bh_result->b_size >> inode->i_blkbits;
-
BUG_ON(bh_result->b_size != inode->i_sb->s_blocksize);
-
- /*
- * we don't want to do block allocation in writepage
- * so call get_block_wrap with create = 0
- */
- ret = ext4_get_blocks(NULL, inode, iblock, max_blocks, bh_result, 0);
- if (ret > 0) {
- bh_result->b_size = (ret << inode->i_blkbits);
- ret = 0;
- }
- return ret;
+ return _ext4_get_block(inode, iblock, bh_result, 0);
}
static int bget_one(handle_t *handle, struct buffer_head *bh)
@@ -2821,13 +2780,131 @@
* number of contiguous block. So we will limit
* number of contiguous block to a sane value
*/
- if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) &&
+ if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) &&
(max_blocks > EXT4_MAX_TRANS_DATA))
max_blocks = EXT4_MAX_TRANS_DATA;
return ext4_chunk_trans_blocks(inode, max_blocks);
}
+/*
+ * write_cache_pages_da - walk the list of dirty pages of the given
+ * address space and call the callback function (which usually writes
+ * the pages).
+ *
+ * This is a forked version of write_cache_pages(). Differences:
+ * Range cyclic is ignored.
+ * no_nrwrite_index_update is always presumed true
+ */
+static int write_cache_pages_da(struct address_space *mapping,
+ struct writeback_control *wbc,
+ struct mpage_da_data *mpd)
+{
+ int ret = 0;
+ int done = 0;
+ struct pagevec pvec;
+ int nr_pages;
+ pgoff_t index;
+ pgoff_t end; /* Inclusive */
+ long nr_to_write = wbc->nr_to_write;
+
+ pagevec_init(&pvec, 0);
+ index = wbc->range_start >> PAGE_CACHE_SHIFT;
+ end = wbc->range_end >> PAGE_CACHE_SHIFT;
+
+ while (!done && (index <= end)) {
+ int i;
+
+ nr_pages = pagevec_lookup_tag(&pvec, mapping, &index,
+ PAGECACHE_TAG_DIRTY,
+ min(end - index, (pgoff_t)PAGEVEC_SIZE-1) + 1);
+ if (nr_pages == 0)
+ break;
+
+ for (i = 0; i < nr_pages; i++) {
+ struct page *page = pvec.pages[i];
+
+ /*
+ * At this point, the page may be truncated or
+ * invalidated (changing page->mapping to NULL), or
+ * even swizzled back from swapper_space to tmpfs file
+ * mapping. However, page->index will not change
+ * because we have a reference on the page.
+ */
+ if (page->index > end) {
+ done = 1;
+ break;
+ }
+
+ lock_page(page);
+
+ /*
+ * Page truncated or invalidated. We can freely skip it
+ * then, even for data integrity operations: the page
+ * has disappeared concurrently, so there could be no
+ * real expectation of this data interity operation
+ * even if there is now a new, dirty page at the same
+ * pagecache address.
+ */
+ if (unlikely(page->mapping != mapping)) {
+continue_unlock:
+ unlock_page(page);
+ continue;
+ }
+
+ if (!PageDirty(page)) {
+ /* someone wrote it for us */
+ goto continue_unlock;
+ }
+
+ if (PageWriteback(page)) {
+ if (wbc->sync_mode != WB_SYNC_NONE)
+ wait_on_page_writeback(page);
+ else
+ goto continue_unlock;
+ }
+
+ BUG_ON(PageWriteback(page));
+ if (!clear_page_dirty_for_io(page))
+ goto continue_unlock;
+
+ ret = __mpage_da_writepage(page, wbc, mpd);
+ if (unlikely(ret)) {
+ if (ret == AOP_WRITEPAGE_ACTIVATE) {
+ unlock_page(page);
+ ret = 0;
+ } else {
+ done = 1;
+ break;
+ }
+ }
+
+ if (nr_to_write > 0) {
+ nr_to_write--;
+ if (nr_to_write == 0 &&
+ wbc->sync_mode == WB_SYNC_NONE) {
+ /*
+ * We stop writing back only if we are
+ * not doing integrity sync. In case of
+ * integrity sync we have to keep going
+ * because someone may be concurrently
+ * dirtying pages, and we might have
+ * synced a lot of newly appeared dirty
+ * pages, but have not synced all of the
+ * old dirty pages.
+ */
+ done = 1;
+ break;
+ }
+ }
+ }
+ pagevec_release(&pvec);
+ cond_resched();
+ }
+ return ret;
+}
+
+
static int ext4_da_writepages(struct address_space *mapping,
struct writeback_control *wbc)
{
@@ -2836,7 +2913,6 @@
handle_t *handle = NULL;
struct mpage_da_data mpd;
struct inode *inode = mapping->host;
- int no_nrwrite_index_update;
int pages_written = 0;
long pages_skipped;
unsigned int max_pages;
@@ -2916,12 +2992,6 @@
mpd.wbc = wbc;
mpd.inode = mapping->host;
- /*
- * we don't want write_cache_pages to update
- * nr_to_write and writeback_index
- */
- no_nrwrite_index_update = wbc->no_nrwrite_index_update;
- wbc->no_nrwrite_index_update = 1;
pages_skipped = wbc->pages_skipped;
retry:
@@ -2941,7 +3011,7 @@
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
ext4_msg(inode->i_sb, KERN_CRIT, "%s: jbd2_start: "
- "%ld pages, ino %lu; err %d\n", __func__,
+ "%ld pages, ino %lu; err %d", __func__,
wbc->nr_to_write, inode->i_ino, ret);
goto out_writepages;
}
@@ -2963,8 +3033,7 @@
mpd.io_done = 0;
mpd.pages_written = 0;
mpd.retval = 0;
- ret = write_cache_pages(mapping, wbc, __mpage_da_writepage,
- &mpd);
+ ret = write_cache_pages_da(mapping, wbc, &mpd);
/*
* If we have a contiguous extent of pages and we
* haven't done the I/O yet, map the blocks and submit
@@ -3016,7 +3085,7 @@
if (pages_skipped != wbc->pages_skipped)
ext4_msg(inode->i_sb, KERN_CRIT,
"This should not happen leaving %s "
- "with nr_to_write = %ld ret = %d\n",
+ "with nr_to_write = %ld ret = %d",
__func__, wbc->nr_to_write, ret);
/* Update index */
@@ -3030,8 +3099,6 @@
mapping->writeback_index = index;
out_writepages:
- if (!no_nrwrite_index_update)
- wbc->no_nrwrite_index_update = 0;
wbc->nr_to_write -= nr_to_writebump;
wbc->range_start = range_start;
trace_ext4_da_writepages_result(inode, wbc, ret, pages_written);
@@ -3076,7 +3143,7 @@
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
- int ret, retries = 0, quota_retries = 0;
+ int ret, retries = 0;
struct page *page;
pgoff_t index;
unsigned from, to;
@@ -3135,22 +3202,6 @@
if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
goto retry;
-
- if ((ret == -EDQUOT) &&
- EXT4_I(inode)->i_reserved_meta_blocks &&
- (quota_retries++ < 3)) {
- /*
- * Since we often over-estimate the number of meta
- * data blocks required, we may sometimes get a
- * spurios out of quota error even though there would
- * be enough space once we write the data blocks and
- * find out how many meta data blocks were _really_
- * required. So try forcing the inode write to see if
- * that helps.
- */
- write_inode_now(inode, (quota_retries == 3));
- goto retry;
- }
out:
return ret;
}
@@ -3546,46 +3597,18 @@
return ret;
}
+/*
+ * ext4_get_block used when preparing for a DIO write or buffer write.
+ * We allocate an uinitialized extent if blocks haven't been allocated.
+ * The extent will be converted to initialized after the IO is complete.
+ */
static int ext4_get_block_write(struct inode *inode, sector_t iblock,
struct buffer_head *bh_result, int create)
{
- handle_t *handle = ext4_journal_current_handle();
- int ret = 0;
- unsigned max_blocks = bh_result->b_size >> inode->i_blkbits;
- int dio_credits;
- int started = 0;
-
ext4_debug("ext4_get_block_write: inode %lu, create flag %d\n",
inode->i_ino, create);
- /*
- * ext4_get_block in prepare for a DIO write or buffer write.
- * We allocate an uinitialized extent if blocks haven't been allocated.
- * The extent will be converted to initialized after IO complete.
- */
- create = EXT4_GET_BLOCKS_IO_CREATE_EXT;
-
- if (!handle) {
- if (max_blocks > DIO_MAX_BLOCKS)
- max_blocks = DIO_MAX_BLOCKS;
- dio_credits = ext4_chunk_trans_blocks(inode, max_blocks);
- handle = ext4_journal_start(inode, dio_credits);
- if (IS_ERR(handle)) {
- ret = PTR_ERR(handle);
- goto out;
- }
- started = 1;
- }
-
- ret = ext4_get_blocks(handle, inode, iblock, max_blocks, bh_result,
- create);
- if (ret > 0) {
- bh_result->b_size = (ret << inode->i_blkbits);
- ret = 0;
- }
- if (started)
- ext4_journal_stop(handle);
-out:
- return ret;
+ return _ext4_get_block(inode, iblock, bh_result,
+ EXT4_GET_BLOCKS_IO_CREATE_EXT);
}
static void dump_completed_IO(struct inode * inode)
@@ -3973,7 +3996,7 @@
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_mapping->host;
- if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)
+ if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
return ext4_ext_direct_IO(rw, iocb, iov, offset, nr_segs);
return ext4_ind_direct_IO(rw, iocb, iov, offset, nr_segs);
@@ -4302,10 +4325,9 @@
if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), block_to_free,
count)) {
- ext4_error(inode->i_sb, "inode #%lu: "
- "attempt to clear blocks %llu len %lu, invalid",
- inode->i_ino, (unsigned long long) block_to_free,
- count);
+ EXT4_ERROR_INODE(inode, "attempt to clear invalid "
+ "blocks %llu len %lu",
+ (unsigned long long) block_to_free, count);
return 1;
}
@@ -4410,11 +4432,10 @@
if ((EXT4_JOURNAL(inode) == NULL) || bh2jh(this_bh))
ext4_handle_dirty_metadata(handle, inode, this_bh);
else
- ext4_error(inode->i_sb,
- "circular indirect block detected, "
- "inode=%lu, block=%llu",
- inode->i_ino,
- (unsigned long long) this_bh->b_blocknr);
+ EXT4_ERROR_INODE(inode,
+ "circular indirect block detected at "
+ "block %llu",
+ (unsigned long long) this_bh->b_blocknr);
}
}
@@ -4452,11 +4473,10 @@
if (!ext4_data_block_valid(EXT4_SB(inode->i_sb),
nr, 1)) {
- ext4_error(inode->i_sb,
- "indirect mapped block in inode "
- "#%lu invalid (level %d, blk #%lu)",
- inode->i_ino, depth,
- (unsigned long) nr);
+ EXT4_ERROR_INODE(inode,
+ "invalid indirect mapped "
+ "block %lu (level %d)",
+ (unsigned long) nr, depth);
break;
}
@@ -4468,9 +4488,9 @@
* (should be rare).
*/
if (!bh) {
- ext4_error(inode->i_sb,
- "Read failure, inode=%lu, block=%llu",
- inode->i_ino, nr);
+ EXT4_ERROR_INODE(inode,
+ "Read failure block=%llu",
+ (unsigned long long) nr);
continue;
}
@@ -4612,12 +4632,12 @@
if (!ext4_can_truncate(inode))
return;
- EXT4_I(inode)->i_flags &= ~EXT4_EOFBLOCKS_FL;
+ ext4_clear_inode_flag(inode, EXT4_INODE_EOFBLOCKS);
if (inode->i_size == 0 && !test_opt(inode->i_sb, NO_AUTO_DA_ALLOC))
ext4_set_inode_state(inode, EXT4_STATE_DA_ALLOC_CLOSE);
- if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) {
+ if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) {
ext4_ext_truncate(inode);
return;
}
@@ -4785,8 +4805,8 @@
bh = sb_getblk(sb, block);
if (!bh) {
- ext4_error(sb, "unable to read inode block - "
- "inode=%lu, block=%llu", inode->i_ino, block);
+ EXT4_ERROR_INODE(inode, "unable to read inode block - "
+ "block %llu", block);
return -EIO;
}
if (!buffer_uptodate(bh)) {
@@ -4884,8 +4904,8 @@
submit_bh(READ_META, bh);
wait_on_buffer(bh);
if (!buffer_uptodate(bh)) {
- ext4_error(sb, "unable to read inode block - inode=%lu,"
- " block=%llu", inode->i_ino, block);
+ EXT4_ERROR_INODE(inode, "unable to read inode "
+ "block %llu", block);
brelse(bh);
return -EIO;
}
@@ -4922,20 +4942,26 @@
/* Propagate flags from i_flags to EXT4_I(inode)->i_flags */
void ext4_get_inode_flags(struct ext4_inode_info *ei)
{
- unsigned int flags = ei->vfs_inode.i_flags;
+ unsigned int vfs_fl;
+ unsigned long old_fl, new_fl;
- ei->i_flags &= ~(EXT4_SYNC_FL|EXT4_APPEND_FL|
- EXT4_IMMUTABLE_FL|EXT4_NOATIME_FL|EXT4_DIRSYNC_FL);
- if (flags & S_SYNC)
- ei->i_flags |= EXT4_SYNC_FL;
- if (flags & S_APPEND)
- ei->i_flags |= EXT4_APPEND_FL;
- if (flags & S_IMMUTABLE)
- ei->i_flags |= EXT4_IMMUTABLE_FL;
- if (flags & S_NOATIME)
- ei->i_flags |= EXT4_NOATIME_FL;
- if (flags & S_DIRSYNC)
- ei->i_flags |= EXT4_DIRSYNC_FL;
+ do {
+ vfs_fl = ei->vfs_inode.i_flags;
+ old_fl = ei->i_flags;
+ new_fl = old_fl & ~(EXT4_SYNC_FL|EXT4_APPEND_FL|
+ EXT4_IMMUTABLE_FL|EXT4_NOATIME_FL|
+ EXT4_DIRSYNC_FL);
+ if (vfs_fl & S_SYNC)
+ new_fl |= EXT4_SYNC_FL;
+ if (vfs_fl & S_APPEND)
+ new_fl |= EXT4_APPEND_FL;
+ if (vfs_fl & S_IMMUTABLE)
+ new_fl |= EXT4_IMMUTABLE_FL;
+ if (vfs_fl & S_NOATIME)
+ new_fl |= EXT4_NOATIME_FL;
+ if (vfs_fl & S_DIRSYNC)
+ new_fl |= EXT4_DIRSYNC_FL;
+ } while (cmpxchg(&ei->i_flags, old_fl, new_fl) != old_fl);
}
static blkcnt_t ext4_inode_blocks(struct ext4_inode *raw_inode,
@@ -5096,8 +5122,8 @@
ret = 0;
if (ei->i_file_acl &&
!ext4_data_block_valid(EXT4_SB(sb), ei->i_file_acl, 1)) {
- ext4_error(sb, "bad extended attribute block %llu inode #%lu",
- ei->i_file_acl, inode->i_ino);
+ EXT4_ERROR_INODE(inode, "bad extended attribute block %llu",
+ ei->i_file_acl);
ret = -EIO;
goto bad_inode;
} else if (ei->i_flags & EXT4_EXTENTS_FL) {
@@ -5142,8 +5168,7 @@
new_decode_dev(le32_to_cpu(raw_inode->i_block[1])));
} else {
ret = -EIO;
- ext4_error(inode->i_sb, "bogus i_mode (%o) for inode=%lu",
- inode->i_mode, inode->i_ino);
+ EXT4_ERROR_INODE(inode, "bogus i_mode (%o)", inode->i_mode);
goto bad_inode;
}
brelse(iloc.bh);
@@ -5172,7 +5197,7 @@
*/
raw_inode->i_blocks_lo = cpu_to_le32(i_blocks);
raw_inode->i_blocks_high = 0;
- ei->i_flags &= ~EXT4_HUGE_FILE_FL;
+ ext4_clear_inode_flag(inode, EXT4_INODE_HUGE_FILE);
return 0;
}
if (!EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_HUGE_FILE))
@@ -5185,9 +5210,9 @@
*/
raw_inode->i_blocks_lo = cpu_to_le32(i_blocks);
raw_inode->i_blocks_high = cpu_to_le16(i_blocks >> 32);
- ei->i_flags &= ~EXT4_HUGE_FILE_FL;
+ ext4_clear_inode_flag(inode, EXT4_INODE_HUGE_FILE);
} else {
- ei->i_flags |= EXT4_HUGE_FILE_FL;
+ ext4_set_inode_flag(inode, EXT4_INODE_HUGE_FILE);
/* i_block is stored in file system block size */
i_blocks = i_blocks >> (inode->i_blkbits - 9);
raw_inode->i_blocks_lo = cpu_to_le32(i_blocks);
@@ -5381,9 +5406,9 @@
if (wbc->sync_mode == WB_SYNC_ALL)
sync_dirty_buffer(iloc.bh);
if (buffer_req(iloc.bh) && !buffer_uptodate(iloc.bh)) {
- ext4_error(inode->i_sb, "IO error syncing inode, "
- "inode=%lu, block=%llu", inode->i_ino,
- (unsigned long long)iloc.bh->b_blocknr);
+ EXT4_ERROR_INODE(inode,
+ "IO error syncing inode (block=%llu)",
+ (unsigned long long) iloc.bh->b_blocknr);
err = -EIO;
}
brelse(iloc.bh);
@@ -5455,7 +5480,7 @@
}
if (attr->ia_valid & ATTR_SIZE) {
- if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)) {
+ if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) {
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
if (attr->ia_size > sbi->s_bitmap_maxbytes) {
@@ -5468,7 +5493,7 @@
if (S_ISREG(inode->i_mode) &&
attr->ia_valid & ATTR_SIZE &&
(attr->ia_size < inode->i_size ||
- (EXT4_I(inode)->i_flags & EXT4_EOFBLOCKS_FL))) {
+ (ext4_test_inode_flag(inode, EXT4_INODE_EOFBLOCKS)))) {
handle_t *handle;
handle = ext4_journal_start(inode, 3);
@@ -5500,7 +5525,7 @@
}
}
/* ext4_truncate will clear the flag */
- if ((EXT4_I(inode)->i_flags & EXT4_EOFBLOCKS_FL))
+ if ((ext4_test_inode_flag(inode, EXT4_INODE_EOFBLOCKS)))
ext4_truncate(inode);
}
@@ -5576,7 +5601,7 @@
static int ext4_index_trans_blocks(struct inode *inode, int nrblocks, int chunk)
{
- if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL))
+ if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
return ext4_indirect_trans_blocks(inode, nrblocks, chunk);
return ext4_ext_index_trans_blocks(inode, nrblocks, chunk);
}
@@ -5911,9 +5936,9 @@
*/
if (val)
- EXT4_I(inode)->i_flags |= EXT4_JOURNAL_DATA_FL;
+ ext4_set_inode_flag(inode, EXT4_INODE_JOURNAL_DATA);
else
- EXT4_I(inode)->i_flags &= ~EXT4_JOURNAL_DATA_FL;
+ ext4_clear_inode_flag(inode, EXT4_INODE_JOURNAL_DATA);
ext4_set_aops(inode);
jbd2_journal_unlock_updates(journal);
diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index 016d024..bf5ae88 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -258,7 +258,7 @@
if (me.moved_len > 0)
file_remove_suid(donor_filp);
- if (copy_to_user((struct move_extent __user *)arg,
+ if (copy_to_user((struct move_extent __user *)arg,
&me, sizeof(me)))
err = -EFAULT;
mext_out:
@@ -373,7 +373,30 @@
case EXT4_IOC32_SETRSVSZ:
cmd = EXT4_IOC_SETRSVSZ;
break;
- case EXT4_IOC_GROUP_ADD:
+ case EXT4_IOC32_GROUP_ADD: {
+ struct compat_ext4_new_group_input __user *uinput;
+ struct ext4_new_group_input input;
+ mm_segment_t old_fs;
+ int err;
+
+ uinput = compat_ptr(arg);
+ err = get_user(input.group, &uinput->group);
+ err |= get_user(input.block_bitmap, &uinput->block_bitmap);
+ err |= get_user(input.inode_bitmap, &uinput->inode_bitmap);
+ err |= get_user(input.inode_table, &uinput->inode_table);
+ err |= get_user(input.blocks_count, &uinput->blocks_count);
+ err |= get_user(input.reserved_blocks,
+ &uinput->reserved_blocks);
+ if (err)
+ return -EFAULT;
+ old_fs = get_fs();
+ set_fs(KERNEL_DS);
+ err = ext4_ioctl(file, EXT4_IOC_GROUP_ADD,
+ (unsigned long) &input);
+ set_fs(old_fs);
+ return err;
+ }
+ case EXT4_IOC_MOVE_EXT:
break;
default:
return -ENOIOCTLCMD;
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index b423a36..12b3bc0 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -658,6 +658,27 @@
}
}
+/*
+ * Cache the order of the largest free extent we have available in this block
+ * group.
+ */
+static void
+mb_set_largest_free_order(struct super_block *sb, struct ext4_group_info *grp)
+{
+ int i;
+ int bits;
+
+ grp->bb_largest_free_order = -1; /* uninit */
+
+ bits = sb->s_blocksize_bits + 1;
+ for (i = bits; i >= 0; i--) {
+ if (grp->bb_counters[i] > 0) {
+ grp->bb_largest_free_order = i;
+ break;
+ }
+ }
+}
+
static noinline_for_stack
void ext4_mb_generate_buddy(struct super_block *sb,
void *buddy, void *bitmap, ext4_group_t group)
@@ -700,6 +721,7 @@
*/
grp->bb_free = free;
}
+ mb_set_largest_free_order(sb, grp);
clear_bit(EXT4_GROUP_INFO_NEED_INIT_BIT, &(grp->bb_state));
@@ -725,6 +747,9 @@
* contain blocks_per_page (PAGE_CACHE_SIZE / blocksize) blocks.
* So it can have information regarding groups_per_page which
* is blocks_per_page/2
+ *
+ * Locking note: This routine takes the block group lock of all groups
+ * for this page; do not hold this lock when calling this routine!
*/
static int ext4_mb_init_cache(struct page *page, char *incore)
@@ -865,6 +890,7 @@
BUG_ON(incore == NULL);
mb_debug(1, "put buddy for group %u in page %lu/%x\n",
group, page->index, i * blocksize);
+ trace_ext4_mb_buddy_bitmap_load(sb, group);
grinfo = ext4_get_group_info(sb, group);
grinfo->bb_fragments = 0;
memset(grinfo->bb_counters, 0,
@@ -882,6 +908,7 @@
BUG_ON(incore != NULL);
mb_debug(1, "put bitmap for group %u in page %lu/%x\n",
group, page->index, i * blocksize);
+ trace_ext4_mb_bitmap_load(sb, group);
/* see comments in ext4_mb_put_pa() */
ext4_lock_group(sb, group);
@@ -910,6 +937,11 @@
return err;
}
+/*
+ * Locking note: This routine calls ext4_mb_init_cache(), which takes the
+ * block group lock of all groups for this page; do not hold the BG lock when
+ * calling this routine!
+ */
static noinline_for_stack
int ext4_mb_init_group(struct super_block *sb, ext4_group_t group)
{
@@ -1004,6 +1036,11 @@
return ret;
}
+/*
+ * Locking note: This routine calls ext4_mb_init_cache(), which takes the
+ * block group lock of all groups for this page; do not hold the BG lock when
+ * calling this routine!
+ */
static noinline_for_stack int
ext4_mb_load_buddy(struct super_block *sb, ext4_group_t group,
struct ext4_buddy *e4b)
@@ -1150,7 +1187,7 @@
return ret;
}
-static void ext4_mb_release_desc(struct ext4_buddy *e4b)
+static void ext4_mb_unload_buddy(struct ext4_buddy *e4b)
{
if (e4b->bd_bitmap_page)
page_cache_release(e4b->bd_bitmap_page);
@@ -1299,6 +1336,7 @@
buddy = buddy2;
} while (1);
}
+ mb_set_largest_free_order(sb, e4b->bd_info);
mb_check_buddy(e4b);
}
@@ -1427,6 +1465,7 @@
e4b->bd_info->bb_counters[ord]++;
e4b->bd_info->bb_counters[ord]++;
}
+ mb_set_largest_free_order(e4b->bd_sb, e4b->bd_info);
mb_set_bits(EXT4_MB_BITMAP(e4b), ex->fe_start, len0);
mb_check_buddy(e4b);
@@ -1617,7 +1656,7 @@
}
ext4_unlock_group(ac->ac_sb, group);
- ext4_mb_release_desc(e4b);
+ ext4_mb_unload_buddy(e4b);
return 0;
}
@@ -1672,7 +1711,7 @@
ext4_mb_use_best_found(ac, e4b);
}
ext4_unlock_group(ac->ac_sb, group);
- ext4_mb_release_desc(e4b);
+ ext4_mb_unload_buddy(e4b);
return 0;
}
@@ -1821,16 +1860,22 @@
}
}
+/* This is now called BEFORE we load the buddy bitmap. */
static int ext4_mb_good_group(struct ext4_allocation_context *ac,
ext4_group_t group, int cr)
{
unsigned free, fragments;
- unsigned i, bits;
int flex_size = ext4_flex_bg_size(EXT4_SB(ac->ac_sb));
struct ext4_group_info *grp = ext4_get_group_info(ac->ac_sb, group);
BUG_ON(cr < 0 || cr >= 4);
- BUG_ON(EXT4_MB_GRP_NEED_INIT(grp));
+
+ /* We only do this if the grp has never been initialized */
+ if (unlikely(EXT4_MB_GRP_NEED_INIT(grp))) {
+ int ret = ext4_mb_init_group(ac->ac_sb, group);
+ if (ret)
+ return 0;
+ }
free = grp->bb_free;
fragments = grp->bb_fragments;
@@ -1843,17 +1888,16 @@
case 0:
BUG_ON(ac->ac_2order == 0);
+ if (grp->bb_largest_free_order < ac->ac_2order)
+ return 0;
+
/* Avoid using the first bg of a flexgroup for data files */
if ((ac->ac_flags & EXT4_MB_HINT_DATA) &&
(flex_size >= EXT4_FLEX_SIZE_DIR_ALLOC_SCHEME) &&
((group % flex_size) == 0))
return 0;
- bits = ac->ac_sb->s_blocksize_bits + 1;
- for (i = ac->ac_2order; i <= bits; i++)
- if (grp->bb_counters[i] > 0)
- return 1;
- break;
+ return 1;
case 1:
if ((free / fragments) >= ac->ac_g_ex.fe_len)
return 1;
@@ -1964,7 +2008,7 @@
sbi = EXT4_SB(sb);
ngroups = ext4_get_groups_count(sb);
/* non-extent files are limited to low blocks/groups */
- if (!(EXT4_I(ac->ac_inode)->i_flags & EXT4_EXTENTS_FL))
+ if (!(ext4_test_inode_flag(ac->ac_inode, EXT4_INODE_EXTENTS)))
ngroups = sbi->s_blockfile_groups;
BUG_ON(ac->ac_status == AC_STATUS_FOUND);
@@ -2024,15 +2068,11 @@
group = ac->ac_g_ex.fe_group;
for (i = 0; i < ngroups; group++, i++) {
- struct ext4_group_info *grp;
- struct ext4_group_desc *desc;
-
if (group == ngroups)
group = 0;
- /* quick check to skip empty groups */
- grp = ext4_get_group_info(sb, group);
- if (grp->bb_free == 0)
+ /* This now checks without needing the buddy page */
+ if (!ext4_mb_good_group(ac, group, cr))
continue;
err = ext4_mb_load_buddy(sb, group, &e4b);
@@ -2040,15 +2080,18 @@
goto out;
ext4_lock_group(sb, group);
+
+ /*
+ * We need to check again after locking the
+ * block group
+ */
if (!ext4_mb_good_group(ac, group, cr)) {
- /* someone did allocation from this group */
ext4_unlock_group(sb, group);
- ext4_mb_release_desc(&e4b);
+ ext4_mb_unload_buddy(&e4b);
continue;
}
ac->ac_groups_scanned++;
- desc = ext4_get_group_desc(sb, group, NULL);
if (cr == 0)
ext4_mb_simple_scan_group(ac, &e4b);
else if (cr == 1 &&
@@ -2058,7 +2101,7 @@
ext4_mb_complex_scan_group(ac, &e4b);
ext4_unlock_group(sb, group);
- ext4_mb_release_desc(&e4b);
+ ext4_mb_unload_buddy(&e4b);
if (ac->ac_status != AC_STATUS_CONTINUE)
break;
@@ -2148,7 +2191,7 @@
ext4_lock_group(sb, group);
memcpy(&sg, ext4_get_group_info(sb, group), i);
ext4_unlock_group(sb, group);
- ext4_mb_release_desc(&e4b);
+ ext4_mb_unload_buddy(&e4b);
seq_printf(seq, "#%-5u: %-5u %-5u %-5u [", group, sg.info.bb_free,
sg.info.bb_fragments, sg.info.bb_first_free);
@@ -2255,6 +2298,7 @@
INIT_LIST_HEAD(&meta_group_info[i]->bb_prealloc_list);
init_rwsem(&meta_group_info[i]->alloc_sem);
meta_group_info[i]->bb_free_root = RB_ROOT;
+ meta_group_info[i]->bb_largest_free_order = -1; /* uninit */
#ifdef DOUBLE_CHECK
{
@@ -2536,6 +2580,7 @@
entry->count, entry->group, entry);
if (test_opt(sb, DISCARD)) {
+ int ret;
ext4_fsblk_t discard_block;
discard_block = entry->start_blk +
@@ -2543,7 +2588,12 @@
trace_ext4_discard_blocks(sb,
(unsigned long long)discard_block,
entry->count);
- sb_issue_discard(sb, discard_block, entry->count);
+ ret = sb_issue_discard(sb, discard_block, entry->count);
+ if (ret == EOPNOTSUPP) {
+ ext4_warning(sb,
+ "discard not supported, disabling");
+ clear_opt(EXT4_SB(sb)->s_mount_opt, DISCARD);
+ }
}
err = ext4_mb_load_buddy(sb, entry->group, &e4b);
@@ -2568,7 +2618,7 @@
}
ext4_unlock_group(sb, entry->group);
kmem_cache_free(ext4_free_ext_cachep, entry);
- ext4_mb_release_desc(&e4b);
+ ext4_mb_unload_buddy(&e4b);
}
mb_debug(1, "freed %u blocks in %u structures\n", count, count2);
@@ -2641,7 +2691,7 @@
void exit_ext4_mballoc(void)
{
- /*
+ /*
* Wait for completion of call_rcu()'s on ext4_pspace_cachep
* before destroying the slab cache.
*/
@@ -2981,7 +3031,7 @@
if (sbi->s_mb_stats && ac->ac_g_ex.fe_len > 1) {
atomic_inc(&sbi->s_bal_reqs);
atomic_add(ac->ac_b_ex.fe_len, &sbi->s_bal_allocated);
- if (ac->ac_o_ex.fe_len >= ac->ac_g_ex.fe_len)
+ if (ac->ac_b_ex.fe_len >= ac->ac_o_ex.fe_len)
atomic_inc(&sbi->s_bal_success);
atomic_add(ac->ac_found, &sbi->s_bal_ex_scanned);
if (ac->ac_g_ex.fe_start == ac->ac_b_ex.fe_start &&
@@ -3123,7 +3173,7 @@
continue;
/* non-extent files can't have physical blocks past 2^32 */
- if (!(EXT4_I(ac->ac_inode)->i_flags & EXT4_EXTENTS_FL) &&
+ if (!(ext4_test_inode_flag(ac->ac_inode, EXT4_INODE_EXTENTS)) &&
pa->pa_pstart + pa->pa_len > EXT4_MAX_BLOCK_FILE_PHYS)
continue;
@@ -3280,7 +3330,7 @@
spin_unlock(&pa->pa_lock);
grp_blk = pa->pa_pstart;
- /*
+ /*
* If doing group-based preallocation, pa_pstart may be in the
* next group when pa is used up
*/
@@ -3697,7 +3747,7 @@
ext4_unlock_group(sb, group);
if (ac)
kmem_cache_free(ext4_ac_cachep, ac);
- ext4_mb_release_desc(&e4b);
+ ext4_mb_unload_buddy(&e4b);
put_bh(bitmap_bh);
return free;
}
@@ -3801,7 +3851,7 @@
if (bitmap_bh == NULL) {
ext4_error(sb, "Error reading block bitmap for %u",
group);
- ext4_mb_release_desc(&e4b);
+ ext4_mb_unload_buddy(&e4b);
continue;
}
@@ -3810,7 +3860,7 @@
ext4_mb_release_inode_pa(&e4b, bitmap_bh, pa, ac);
ext4_unlock_group(sb, group);
- ext4_mb_release_desc(&e4b);
+ ext4_mb_unload_buddy(&e4b);
put_bh(bitmap_bh);
list_del(&pa->u.pa_tmp_list);
@@ -4074,7 +4124,7 @@
ext4_mb_release_group_pa(&e4b, pa, ac);
ext4_unlock_group(sb, group);
- ext4_mb_release_desc(&e4b);
+ ext4_mb_unload_buddy(&e4b);
list_del(&pa->u.pa_tmp_list);
call_rcu(&(pa)->u.pa_rcu, ext4_mb_pa_callback);
}
@@ -4484,12 +4534,12 @@
if (!bh)
tbh = sb_find_get_block(inode->i_sb,
block + i);
- ext4_forget(handle, flags & EXT4_FREE_BLOCKS_METADATA,
+ ext4_forget(handle, flags & EXT4_FREE_BLOCKS_METADATA,
inode, tbh, block + i);
}
}
- /*
+ /*
* We need to make sure we don't reuse the freed block until
* after the transaction is committed, which we can do by
* treating the block as metadata, below. We make an
@@ -4610,7 +4660,7 @@
atomic_add(count, &sbi->s_flex_groups[flex_group].free_blocks);
}
- ext4_mb_release_desc(&e4b);
+ ext4_mb_unload_buddy(&e4b);
freed += count;
diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c
index 34dcfc5..6f3a27e 100644
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -475,7 +475,7 @@
*/
if (!EXT4_HAS_INCOMPAT_FEATURE(inode->i_sb,
EXT4_FEATURE_INCOMPAT_EXTENTS) ||
- (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL))
+ (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
return -EINVAL;
if (S_ISLNK(inode->i_mode) && inode->i_blocks == 0)
diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c
index d1fc662..52abfa1 100644
--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -482,6 +482,7 @@
int depth = ext_depth(orig_inode);
int ret;
+ start_ext.ee_block = end_ext.ee_block = 0;
o_start = o_end = oext = orig_path[depth].p_ext;
oext_alen = ext4_ext_get_actual_len(oext);
start_ext.ee_len = end_ext.ee_len = 0;
@@ -529,7 +530,7 @@
* new_ext |-------|
*/
if (le32_to_cpu(oext->ee_block) + oext_alen - 1 < new_ext_end) {
- ext4_error(orig_inode->i_sb,
+ EXT4_ERROR_INODE(orig_inode,
"new_ext_end(%u) should be less than or equal to "
"oext->ee_block(%u) + oext_alen(%d) - 1",
new_ext_end, le32_to_cpu(oext->ee_block),
@@ -692,12 +693,12 @@
while (1) {
/* The extent for donor must be found. */
if (!dext) {
- ext4_error(donor_inode->i_sb,
+ EXT4_ERROR_INODE(donor_inode,
"The extent for donor must be found");
*err = -EIO;
goto out;
} else if (donor_off != le32_to_cpu(tmp_dext.ee_block)) {
- ext4_error(donor_inode->i_sb,
+ EXT4_ERROR_INODE(donor_inode,
"Donor offset(%u) and the first block of donor "
"extent(%u) should be equal",
donor_off,
@@ -959,6 +960,9 @@
return -EINVAL;
}
+ if (IS_IMMUTABLE(donor_inode) || IS_APPEND(donor_inode))
+ return -EPERM;
+
/* Ext4 move extent does not support swapfile */
if (IS_SWAPFILE(orig_inode) || IS_SWAPFILE(donor_inode)) {
ext4_debug("ext4 move extent: The argument files should "
@@ -976,11 +980,11 @@
}
/* Ext4 move extent supports only extent based file */
- if (!(EXT4_I(orig_inode)->i_flags & EXT4_EXTENTS_FL)) {
+ if (!(ext4_test_inode_flag(orig_inode, EXT4_INODE_EXTENTS))) {
ext4_debug("ext4 move extent: orig file is not extents "
"based file [ino:orig %lu]\n", orig_inode->i_ino);
return -EOPNOTSUPP;
- } else if (!(EXT4_I(donor_inode)->i_flags & EXT4_EXTENTS_FL)) {
+ } else if (!(ext4_test_inode_flag(donor_inode, EXT4_INODE_EXTENTS))) {
ext4_debug("ext4 move extent: donor file is not extents "
"based file [ino:donor %lu]\n", donor_inode->i_ino);
return -EOPNOTSUPP;
@@ -1354,7 +1358,7 @@
if (ret1 < 0)
break;
if (*moved_len > len) {
- ext4_error(orig_inode->i_sb,
+ EXT4_ERROR_INODE(orig_inode,
"We replaced blocks too much! "
"sum of replaced: %llu requested: %llu",
*moved_len, len);
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 0c070fa..a43e661 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -187,7 +187,7 @@
return blocksize;
return (len & 65532) | ((len & 3) << 16);
}
-
+
__le16 ext4_rec_len_to_disk(unsigned len, unsigned blocksize)
{
if ((len > blocksize) || (blocksize > (1 << 18)) || (len & 3))
@@ -197,7 +197,7 @@
if (len == blocksize) {
if (blocksize == 65536)
return cpu_to_le16(EXT4_MAX_REC_LEN);
- else
+ else
return cpu_to_le16(0);
}
return cpu_to_le16((len & 65532) | ((len >> 16) & 3));
@@ -349,7 +349,7 @@
brelse(bh);
}
if (bcount)
- printk(KERN_DEBUG "%snames %u, fullness %u (%u%%)\n",
+ printk(KERN_DEBUG "%snames %u, fullness %u (%u%%)\n",
levels ? "" : " ", names, space/bcount,
(space/bcount)*100/blocksize);
return (struct stats) { names, space, bcount};
@@ -653,10 +653,10 @@
int ret, err;
__u32 hashval;
- dxtrace(printk(KERN_DEBUG "In htree_fill_tree, start hash: %x:%x\n",
+ dxtrace(printk(KERN_DEBUG "In htree_fill_tree, start hash: %x:%x\n",
start_hash, start_minor_hash));
dir = dir_file->f_path.dentry->d_inode;
- if (!(EXT4_I(dir)->i_flags & EXT4_INDEX_FL)) {
+ if (!(ext4_test_inode_flag(dir, EXT4_INODE_INDEX))) {
hinfo.hash_version = EXT4_SB(dir->i_sb)->s_def_hash_version;
if (hinfo.hash_version <= DX_HASH_TEA)
hinfo.hash_version +=
@@ -801,7 +801,7 @@
{
if (!EXT4_HAS_COMPAT_FEATURE(inode->i_sb,
EXT4_FEATURE_COMPAT_DIR_INDEX))
- EXT4_I(inode)->i_flags &= ~EXT4_INDEX_FL;
+ ext4_clear_inode_flag(inode, EXT4_INODE_INDEX);
}
/*
@@ -943,8 +943,8 @@
wait_on_buffer(bh);
if (!buffer_uptodate(bh)) {
/* read error, skip block & hope for the best */
- ext4_error(sb, "reading directory #%lu offset %lu",
- dir->i_ino, (unsigned long)block);
+ EXT4_ERROR_INODE(dir, "reading directory lblock %lu",
+ (unsigned long) block);
brelse(bh);
goto next;
}
@@ -1066,15 +1066,15 @@
__u32 ino = le32_to_cpu(de->inode);
brelse(bh);
if (!ext4_valid_inum(dir->i_sb, ino)) {
- ext4_error(dir->i_sb, "bad inode number: %u", ino);
+ EXT4_ERROR_INODE(dir, "bad inode number: %u", ino);
return ERR_PTR(-EIO);
}
inode = ext4_iget(dir->i_sb, ino);
if (unlikely(IS_ERR(inode))) {
if (PTR_ERR(inode) == -ESTALE) {
- ext4_error(dir->i_sb,
- "deleted inode referenced: %u",
- ino);
+ EXT4_ERROR_INODE(dir,
+ "deleted inode referenced: %u",
+ ino);
return ERR_PTR(-EIO);
} else {
return ERR_CAST(inode);
@@ -1104,8 +1104,8 @@
brelse(bh);
if (!ext4_valid_inum(child->d_inode->i_sb, ino)) {
- ext4_error(child->d_inode->i_sb,
- "bad inode number: %u", ino);
+ EXT4_ERROR_INODE(child->d_inode,
+ "bad parent inode number: %u", ino);
return ERR_PTR(-EIO);
}
@@ -1141,7 +1141,7 @@
unsigned rec_len = 0;
while (count--) {
- struct ext4_dir_entry_2 *de = (struct ext4_dir_entry_2 *)
+ struct ext4_dir_entry_2 *de = (struct ext4_dir_entry_2 *)
(from + (map->offs<<2));
rec_len = EXT4_DIR_REC_LEN(de->name_len);
memcpy (to, de, rec_len);
@@ -1404,9 +1404,7 @@
de = (struct ext4_dir_entry_2 *)((char *)fde +
ext4_rec_len_from_disk(fde->rec_len, blocksize));
if ((char *) de >= (((char *) root) + blocksize)) {
- ext4_error(dir->i_sb,
- "invalid rec_len for '..' in inode %lu",
- dir->i_ino);
+ EXT4_ERROR_INODE(dir, "invalid rec_len for '..'");
brelse(bh);
return -EIO;
}
@@ -1418,7 +1416,7 @@
brelse(bh);
return retval;
}
- EXT4_I(dir)->i_flags |= EXT4_INDEX_FL;
+ ext4_set_inode_flag(dir, EXT4_INODE_INDEX);
data1 = bh2->b_data;
memcpy (data1, de, len);
@@ -1491,7 +1489,7 @@
retval = ext4_dx_add_entry(handle, dentry, inode);
if (!retval || (retval != ERR_BAD_DX_DIR))
return retval;
- EXT4_I(dir)->i_flags &= ~EXT4_INDEX_FL;
+ ext4_clear_inode_flag(dir, EXT4_INODE_INDEX);
dx_fallback++;
ext4_mark_inode_dirty(handle, dir);
}
@@ -1519,6 +1517,8 @@
de->rec_len = ext4_rec_len_to_disk(blocksize, blocksize);
retval = add_dirent_to_buf(handle, dentry, inode, de, bh);
brelse(bh);
+ if (retval == 0)
+ ext4_set_inode_state(inode, EXT4_STATE_NEWENTRY);
return retval;
}
@@ -1915,9 +1915,8 @@
if (inode->i_size < EXT4_DIR_REC_LEN(1) + EXT4_DIR_REC_LEN(2) ||
!(bh = ext4_bread(NULL, inode, 0, 0, &err))) {
if (err)
- ext4_error(inode->i_sb,
- "error %d reading directory #%lu offset 0",
- err, inode->i_ino);
+ EXT4_ERROR_INODE(inode,
+ "error %d reading directory lblock 0", err);
else
ext4_warning(inode->i_sb,
"bad directory (dir #%lu) - no data block",
@@ -1941,17 +1940,17 @@
de = ext4_next_entry(de1, sb->s_blocksize);
while (offset < inode->i_size) {
if (!bh ||
- (void *) de >= (void *) (bh->b_data+sb->s_blocksize)) {
+ (void *) de >= (void *) (bh->b_data+sb->s_blocksize)) {
+ unsigned int lblock;
err = 0;
brelse(bh);
- bh = ext4_bread(NULL, inode,
- offset >> EXT4_BLOCK_SIZE_BITS(sb), 0, &err);
+ lblock = offset >> EXT4_BLOCK_SIZE_BITS(sb);
+ bh = ext4_bread(NULL, inode, lblock, 0, &err);
if (!bh) {
if (err)
- ext4_error(sb,
- "error %d reading directory"
- " #%lu offset %u",
- err, inode->i_ino, offset);
+ EXT4_ERROR_INODE(inode,
+ "error %d reading directory "
+ "lblock %u", err, lblock);
offset += sb->s_blocksize;
continue;
}
@@ -2297,7 +2296,7 @@
}
} else {
/* clear the extent format for fast symlink */
- EXT4_I(inode)->i_flags &= ~EXT4_EXTENTS_FL;
+ ext4_clear_inode_flag(inode, EXT4_INODE_EXTENTS);
inode->i_op = &ext4_fast_symlink_inode_operations;
memcpy((char *)&EXT4_I(inode)->i_data, symname, l);
inode->i_size = l-1;
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index 5692c48..6df797e 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -911,7 +911,8 @@
percpu_counter_add(&sbi->s_freeinodes_counter,
EXT4_INODES_PER_GROUP(sb));
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG)) {
+ if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG) &&
+ sbi->s_log_groups_per_flex) {
ext4_group_t flex_group;
flex_group = ext4_flex_group(sbi, input->group);
atomic_add(input->free_blocks_count,
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index e14d22c..4e8983a 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -241,6 +241,7 @@
if (sb->s_flags & MS_RDONLY)
return ERR_PTR(-EROFS);
+ vfs_check_frozen(sb, SB_FREEZE_WRITE);
/* Special case here: if the journal has aborted behind our
* backs (eg. EIO in the commit thread), then we still need to
* take the FS itself readonly cleanly. */
@@ -645,6 +646,8 @@
struct ext4_super_block *es = sbi->s_es;
int i, err;
+ dquot_disable(sb, -1, DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED);
+
flush_workqueue(sbi->dio_unwritten_wq);
destroy_workqueue(sbi->dio_unwritten_wq);
@@ -941,6 +944,8 @@
seq_puts(seq, test_opt(sb, BARRIER) ? "1" : "0");
if (test_opt(sb, JOURNAL_ASYNC_COMMIT))
seq_puts(seq, ",journal_async_commit");
+ else if (test_opt(sb, JOURNAL_CHECKSUM))
+ seq_puts(seq, ",journal_checksum");
if (test_opt(sb, NOBH))
seq_puts(seq, ",nobh");
if (test_opt(sb, I_VERSION))
@@ -1059,7 +1064,7 @@
static int ext4_mark_dquot_dirty(struct dquot *dquot);
static int ext4_write_info(struct super_block *sb, int type);
static int ext4_quota_on(struct super_block *sb, int type, int format_id,
- char *path, int remount);
+ char *path);
static int ext4_quota_on_mount(struct super_block *sb, int type);
static ssize_t ext4_quota_read(struct super_block *sb, int type, char *data,
size_t len, loff_t off);
@@ -1081,12 +1086,12 @@
static const struct quotactl_ops ext4_qctl_operations = {
.quota_on = ext4_quota_on,
- .quota_off = vfs_quota_off,
- .quota_sync = vfs_quota_sync,
- .get_info = vfs_get_dqinfo,
- .set_info = vfs_set_dqinfo,
- .get_dqblk = vfs_get_dqblk,
- .set_dqblk = vfs_set_dqblk
+ .quota_off = dquot_quota_off,
+ .quota_sync = dquot_quota_sync,
+ .get_info = dquot_get_dqinfo,
+ .set_info = dquot_set_dqinfo,
+ .get_dqblk = dquot_get_dqblk,
+ .set_dqblk = dquot_set_dqblk
};
#endif
@@ -2051,7 +2056,7 @@
/* Turn quotas off */
for (i = 0; i < MAXQUOTAS; i++) {
if (sb_dqopt(sb)->files[i])
- vfs_quota_off(sb, i, 0);
+ dquot_quota_off(sb, i);
}
#endif
sb->s_flags = s_flags; /* Restore MS_RDONLY status */
@@ -2213,7 +2218,7 @@
struct ext4_attr {
struct attribute attr;
ssize_t (*show)(struct ext4_attr *, struct ext4_sb_info *, char *);
- ssize_t (*store)(struct ext4_attr *, struct ext4_sb_info *,
+ ssize_t (*store)(struct ext4_attr *, struct ext4_sb_info *,
const char *, size_t);
int offset;
};
@@ -2430,6 +2435,7 @@
__releases(kernel_lock)
__acquires(kernel_lock)
{
+ char *orig_data = kstrdup(data, GFP_KERNEL);
struct buffer_head *bh;
struct ext4_super_block *es = NULL;
struct ext4_sb_info *sbi;
@@ -2793,24 +2799,6 @@
get_random_bytes(&sbi->s_next_generation, sizeof(u32));
spin_lock_init(&sbi->s_next_gen_lock);
- err = percpu_counter_init(&sbi->s_freeblocks_counter,
- ext4_count_free_blocks(sb));
- if (!err) {
- err = percpu_counter_init(&sbi->s_freeinodes_counter,
- ext4_count_free_inodes(sb));
- }
- if (!err) {
- err = percpu_counter_init(&sbi->s_dirs_counter,
- ext4_count_dirs(sb));
- }
- if (!err) {
- err = percpu_counter_init(&sbi->s_dirtyblocks_counter, 0);
- }
- if (err) {
- ext4_msg(sb, KERN_ERR, "insufficient memory");
- goto failed_mount3;
- }
-
sbi->s_stripe = ext4_get_stripe_size(sbi);
sbi->s_max_writeback_mb_bump = 128;
@@ -2910,6 +2898,20 @@
set_task_ioprio(sbi->s_journal->j_task, journal_ioprio);
no_journal:
+ err = percpu_counter_init(&sbi->s_freeblocks_counter,
+ ext4_count_free_blocks(sb));
+ if (!err)
+ err = percpu_counter_init(&sbi->s_freeinodes_counter,
+ ext4_count_free_inodes(sb));
+ if (!err)
+ err = percpu_counter_init(&sbi->s_dirs_counter,
+ ext4_count_dirs(sb));
+ if (!err)
+ err = percpu_counter_init(&sbi->s_dirtyblocks_counter, 0);
+ if (err) {
+ ext4_msg(sb, KERN_ERR, "insufficient memory");
+ goto failed_mount_wq;
+ }
if (test_opt(sb, NOBH)) {
if (!(test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_WRITEBACK_DATA)) {
ext4_msg(sb, KERN_WARNING, "Ignoring nobh option - "
@@ -3001,7 +3003,7 @@
err = ext4_setup_system_zone(sb);
if (err) {
ext4_msg(sb, KERN_ERR, "failed to initialize system "
- "zone (%d)\n", err);
+ "zone (%d)", err);
goto failed_mount4;
}
@@ -3040,9 +3042,11 @@
} else
descr = "out journal";
- ext4_msg(sb, KERN_INFO, "mounted filesystem with%s", descr);
+ ext4_msg(sb, KERN_INFO, "mounted filesystem with%s. "
+ "Opts: %s", descr, orig_data);
lock_kernel();
+ kfree(orig_data);
return 0;
cantfind_ext4:
@@ -3059,6 +3063,10 @@
jbd2_journal_destroy(sbi->s_journal);
sbi->s_journal = NULL;
}
+ percpu_counter_destroy(&sbi->s_freeblocks_counter);
+ percpu_counter_destroy(&sbi->s_freeinodes_counter);
+ percpu_counter_destroy(&sbi->s_dirs_counter);
+ percpu_counter_destroy(&sbi->s_dirtyblocks_counter);
failed_mount3:
if (sbi->s_flex_groups) {
if (is_vmalloc_addr(sbi->s_flex_groups))
@@ -3066,10 +3074,6 @@
else
kfree(sbi->s_flex_groups);
}
- percpu_counter_destroy(&sbi->s_freeblocks_counter);
- percpu_counter_destroy(&sbi->s_freeinodes_counter);
- percpu_counter_destroy(&sbi->s_dirs_counter);
- percpu_counter_destroy(&sbi->s_dirtyblocks_counter);
failed_mount2:
for (i = 0; i < db_count; i++)
brelse(sbi->s_group_desc[i]);
@@ -3089,6 +3093,7 @@
kfree(sbi->s_blockgroup_lock);
kfree(sbi);
lock_kernel();
+ kfree(orig_data);
return ret;
}
@@ -3380,7 +3385,7 @@
if (!(sb->s_flags & MS_RDONLY))
es->s_wtime = cpu_to_le32(get_seconds());
es->s_kbytes_written =
- cpu_to_le64(EXT4_SB(sb)->s_kbytes_written +
+ cpu_to_le64(EXT4_SB(sb)->s_kbytes_written +
((part_stat_read(sb->s_bdev->bd_part, sectors[1]) -
EXT4_SB(sb)->s_sectors_written_start) >> 1));
ext4_free_blocks_count_set(es, percpu_counter_sum_positive(
@@ -3485,8 +3490,10 @@
return 0;
journal = EXT4_SB(sb)->s_journal;
- if (journal)
+ if (journal) {
+ vfs_check_frozen(sb, SB_FREEZE_WRITE);
ret = ext4_journal_force_commit(journal);
+ }
return ret;
}
@@ -3535,18 +3542,16 @@
* the journal.
*/
error = jbd2_journal_flush(journal);
- if (error < 0) {
- out:
- jbd2_journal_unlock_updates(journal);
- return error;
- }
+ if (error < 0)
+ goto out;
/* Journal blocked and flushed, clear needs_recovery flag. */
EXT4_CLEAR_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
error = ext4_commit_super(sb, 1);
- if (error)
- goto out;
- return 0;
+out:
+ /* we rely on s_frozen to stop further updates */
+ jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
+ return error;
}
/*
@@ -3563,7 +3568,6 @@
EXT4_SET_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
ext4_commit_super(sb, 1);
unlock_super(sb);
- jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
return 0;
}
@@ -3574,12 +3578,14 @@
ext4_fsblk_t n_blocks_count = 0;
unsigned long old_sb_flags;
struct ext4_mount_options old_opts;
+ int enable_quota = 0;
ext4_group_t g;
unsigned int journal_ioprio = DEFAULT_JOURNAL_IOPRIO;
int err;
#ifdef CONFIG_QUOTA
int i;
#endif
+ char *orig_data = kstrdup(data, GFP_KERNEL);
lock_kernel();
@@ -3630,6 +3636,10 @@
}
if (*flags & MS_RDONLY) {
+ err = dquot_suspend(sb, -1);
+ if (err < 0)
+ goto restore_opts;
+
/*
* First of all, the unconditional stuff we have to do
* to disable replay of the journal when we next remount
@@ -3698,6 +3708,7 @@
goto restore_opts;
if (!ext4_setup_super(sb, es, 0))
sb->s_flags &= ~MS_RDONLY;
+ enable_quota = 1;
}
}
ext4_setup_system_zone(sb);
@@ -3713,6 +3724,11 @@
#endif
unlock_super(sb);
unlock_kernel();
+ if (enable_quota)
+ dquot_resume(sb, -1);
+
+ ext4_msg(sb, KERN_INFO, "re-mounted. Opts: %s", orig_data);
+ kfree(orig_data);
return 0;
restore_opts:
@@ -3734,6 +3750,7 @@
#endif
unlock_super(sb);
unlock_kernel();
+ kfree(orig_data);
return err;
}
@@ -3906,24 +3923,21 @@
*/
static int ext4_quota_on_mount(struct super_block *sb, int type)
{
- return vfs_quota_on_mount(sb, EXT4_SB(sb)->s_qf_names[type],
- EXT4_SB(sb)->s_jquota_fmt, type);
+ return dquot_quota_on_mount(sb, EXT4_SB(sb)->s_qf_names[type],
+ EXT4_SB(sb)->s_jquota_fmt, type);
}
/*
* Standard function to be called on quota_on
*/
static int ext4_quota_on(struct super_block *sb, int type, int format_id,
- char *name, int remount)
+ char *name)
{
int err;
struct path path;
if (!test_opt(sb, QUOTA))
return -EINVAL;
- /* When remounting, no checks are needed and in fact, name is NULL */
- if (remount)
- return vfs_quota_on(sb, type, format_id, name, remount);
err = kern_path(name, LOOKUP_FOLLOW, &path);
if (err)
@@ -3962,7 +3976,7 @@
}
}
- err = vfs_quota_on_path(sb, type, format_id, &path);
+ err = dquot_quota_on_path(sb, type, format_id, &path);
path_put(&path);
return err;
}
@@ -4141,6 +4155,7 @@
{
int err;
+ ext4_check_flag_values();
err = init_ext4_system_zone();
if (err)
return err;
diff --git a/fs/ext4/symlink.c b/fs/ext4/symlink.c
index 00740cb..ed9354a 100644
--- a/fs/ext4/symlink.c
+++ b/fs/ext4/symlink.c
@@ -34,6 +34,7 @@
.readlink = generic_readlink,
.follow_link = page_follow_link_light,
.put_link = page_put_link,
+ .setattr = ext4_setattr,
#ifdef CONFIG_EXT4_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
@@ -45,6 +46,7 @@
const struct inode_operations ext4_fast_symlink_inode_operations = {
.readlink = generic_readlink,
.follow_link = ext4_follow_link,
+ .setattr = ext4_setattr,
#ifdef CONFIG_EXT4_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index 2de0e95..0433800 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -228,9 +228,8 @@
atomic_read(&(bh->b_count)), le32_to_cpu(BHDR(bh)->h_refcount));
if (ext4_xattr_check_block(bh)) {
bad_block:
- ext4_error(inode->i_sb,
- "inode %lu: bad block %llu", inode->i_ino,
- EXT4_I(inode)->i_file_acl);
+ EXT4_ERROR_INODE(inode, "bad block %llu",
+ EXT4_I(inode)->i_file_acl);
error = -EIO;
goto cleanup;
}
@@ -372,9 +371,8 @@
ea_bdebug(bh, "b_count=%d, refcount=%d",
atomic_read(&(bh->b_count)), le32_to_cpu(BHDR(bh)->h_refcount));
if (ext4_xattr_check_block(bh)) {
- ext4_error(inode->i_sb,
- "inode %lu: bad block %llu", inode->i_ino,
- EXT4_I(inode)->i_file_acl);
+ EXT4_ERROR_INODE(inode, "bad block %llu",
+ EXT4_I(inode)->i_file_acl);
error = -EIO;
goto cleanup;
}
@@ -666,8 +664,8 @@
atomic_read(&(bs->bh->b_count)),
le32_to_cpu(BHDR(bs->bh)->h_refcount));
if (ext4_xattr_check_block(bs->bh)) {
- ext4_error(sb, "inode %lu: bad block %llu",
- inode->i_ino, EXT4_I(inode)->i_file_acl);
+ EXT4_ERROR_INODE(inode, "bad block %llu",
+ EXT4_I(inode)->i_file_acl);
error = -EIO;
goto cleanup;
}
@@ -820,7 +818,7 @@
EXT4_I(inode)->i_block_group);
/* non-extent files can't have physical blocks past 2^32 */
- if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL))
+ if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
goal = goal & EXT4_MAX_BLOCK_FILE_PHYS;
block = ext4_new_meta_blocks(handle, inode,
@@ -828,7 +826,7 @@
if (error)
goto cleanup;
- if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL))
+ if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
BUG_ON(block > EXT4_MAX_BLOCK_FILE_PHYS);
ea_idebug(inode, "creating block %d", block);
@@ -880,8 +878,8 @@
goto cleanup;
bad_block:
- ext4_error(inode->i_sb, "inode %lu: bad block %llu",
- inode->i_ino, EXT4_I(inode)->i_file_acl);
+ EXT4_ERROR_INODE(inode, "bad block %llu",
+ EXT4_I(inode)->i_file_acl);
goto cleanup;
#undef header
@@ -1194,8 +1192,8 @@
if (!bh)
goto cleanup;
if (ext4_xattr_check_block(bh)) {
- ext4_error(inode->i_sb, "inode %lu: bad block %llu",
- inode->i_ino, EXT4_I(inode)->i_file_acl);
+ EXT4_ERROR_INODE(inode, "bad block %llu",
+ EXT4_I(inode)->i_file_acl);
error = -EIO;
goto cleanup;
}
@@ -1372,14 +1370,14 @@
goto cleanup;
bh = sb_bread(inode->i_sb, EXT4_I(inode)->i_file_acl);
if (!bh) {
- ext4_error(inode->i_sb, "inode %lu: block %llu read error",
- inode->i_ino, EXT4_I(inode)->i_file_acl);
+ EXT4_ERROR_INODE(inode, "block %llu read error",
+ EXT4_I(inode)->i_file_acl);
goto cleanup;
}
if (BHDR(bh)->h_magic != cpu_to_le32(EXT4_XATTR_MAGIC) ||
BHDR(bh)->h_blocks != cpu_to_le32(1)) {
- ext4_error(inode->i_sb, "inode %lu: bad block %llu",
- inode->i_ino, EXT4_I(inode)->i_file_acl);
+ EXT4_ERROR_INODE(inode, "bad block %llu",
+ EXT4_I(inode)->i_file_acl);
goto cleanup;
}
ext4_xattr_release_block(handle, inode, bh);
@@ -1504,9 +1502,8 @@
}
bh = sb_bread(inode->i_sb, ce->e_block);
if (!bh) {
- ext4_error(inode->i_sb,
- "inode %lu: block %lu read error",
- inode->i_ino, (unsigned long) ce->e_block);
+ EXT4_ERROR_INODE(inode, "block %lu read error",
+ (unsigned long) ce->e_block);
} else if (le32_to_cpu(BHDR(bh)->h_refcount) >=
EXT4_XATTR_REFCOUNT_MAX) {
ea_idebug(inode, "block %lu refcount %d>=%d",
diff --git a/fs/fat/fat.h b/fs/fat/fat.h
index 53dba57..27ac257 100644
--- a/fs/fat/fat.h
+++ b/fs/fat/fat.h
@@ -306,11 +306,11 @@
extern const struct file_operations fat_file_operations;
extern const struct inode_operations fat_file_inode_operations;
extern int fat_setattr(struct dentry * dentry, struct iattr * attr);
-extern void fat_truncate(struct inode *inode);
+extern int fat_setsize(struct inode *inode, loff_t offset);
+extern void fat_truncate_blocks(struct inode *inode, loff_t offset);
extern int fat_getattr(struct vfsmount *mnt, struct dentry *dentry,
struct kstat *stat);
-extern int fat_file_fsync(struct file *file, struct dentry *dentry,
- int datasync);
+extern int fat_file_fsync(struct file *file, int datasync);
/* fat/inode.c */
extern void fat_attach(struct inode *inode, loff_t i_pos);
diff --git a/fs/fat/file.c b/fs/fat/file.c
index a14c2f6..990dfae 100644
--- a/fs/fat/file.c
+++ b/fs/fat/file.c
@@ -149,12 +149,12 @@
return 0;
}
-int fat_file_fsync(struct file *filp, struct dentry *dentry, int datasync)
+int fat_file_fsync(struct file *filp, int datasync)
{
- struct inode *inode = dentry->d_inode;
+ struct inode *inode = filp->f_mapping->host;
int res, err;
- res = simple_fsync(filp, dentry, datasync);
+ res = generic_file_fsync(filp, datasync);
err = sync_mapping_buffers(MSDOS_SB(inode->i_sb)->fat_inode->i_mapping);
return res ? res : err;
@@ -283,7 +283,7 @@
return fat_free_clusters(inode, free_start);
}
-void fat_truncate(struct inode *inode)
+void fat_truncate_blocks(struct inode *inode, loff_t offset)
{
struct msdos_sb_info *sbi = MSDOS_SB(inode->i_sb);
const unsigned int cluster_size = sbi->cluster_size;
@@ -293,10 +293,10 @@
* This protects against truncating a file bigger than it was then
* trying to write into the hole.
*/
- if (MSDOS_I(inode)->mmu_private > inode->i_size)
- MSDOS_I(inode)->mmu_private = inode->i_size;
+ if (MSDOS_I(inode)->mmu_private > offset)
+ MSDOS_I(inode)->mmu_private = offset;
- nr_clusters = (inode->i_size + (cluster_size - 1)) >> sbi->cluster_bits;
+ nr_clusters = (offset + (cluster_size - 1)) >> sbi->cluster_bits;
fat_free(inode, nr_clusters);
fat_flush_inodes(inode->i_sb, inode, NULL);
@@ -364,6 +364,18 @@
return 0;
}
+int fat_setsize(struct inode *inode, loff_t offset)
+{
+ int error;
+
+ error = simple_setsize(inode, offset);
+ if (error)
+ return error;
+ fat_truncate_blocks(inode, offset);
+
+ return error;
+}
+
#define TIMES_SET_FLAGS (ATTR_MTIME_SET | ATTR_ATIME_SET | ATTR_TIMES_SET)
/* valid file mode bits */
#define FAT_VALID_MODE (S_IFREG | S_IFDIR | S_IRWXUGO)
@@ -378,7 +390,8 @@
/*
* Expand the file. Since inode_setattr() updates ->i_size
* before calling the ->truncate(), but FAT needs to fill the
- * hole before it.
+ * hole before it. XXX: this is no longer true with new truncate
+ * sequence.
*/
if (attr->ia_valid & ATTR_SIZE) {
if (attr->ia_size > inode->i_size) {
@@ -427,15 +440,20 @@
attr->ia_valid &= ~ATTR_MODE;
}
- if (attr->ia_valid)
- error = inode_setattr(inode, attr);
+ if (attr->ia_valid & ATTR_SIZE) {
+ error = fat_setsize(inode, attr->ia_size);
+ if (error)
+ goto out;
+ }
+
+ generic_setattr(inode, attr);
+ mark_inode_dirty(inode);
out:
return error;
}
EXPORT_SYMBOL_GPL(fat_setattr);
const struct inode_operations fat_file_inode_operations = {
- .truncate = fat_truncate,
.setattr = fat_setattr,
.getattr = fat_getattr,
};
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index ed33904..7bf45ae 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -142,14 +142,29 @@
return mpage_readpages(mapping, pages, nr_pages, fat_get_block);
}
+static void fat_write_failed(struct address_space *mapping, loff_t to)
+{
+ struct inode *inode = mapping->host;
+
+ if (to > inode->i_size) {
+ truncate_pagecache(inode, to, inode->i_size);
+ fat_truncate_blocks(inode, inode->i_size);
+ }
+}
+
static int fat_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
+ int err;
+
*pagep = NULL;
- return cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- fat_get_block,
+ err = cont_write_begin_newtrunc(file, mapping, pos, len, flags,
+ pagep, fsdata, fat_get_block,
&MSDOS_I(mapping->host)->mmu_private);
+ if (err < 0)
+ fat_write_failed(mapping, pos + len);
+ return err;
}
static int fat_write_end(struct file *file, struct address_space *mapping,
@@ -159,6 +174,8 @@
struct inode *inode = mapping->host;
int err;
err = generic_write_end(file, mapping, pos, len, copied, pagep, fsdata);
+ if (err < len)
+ fat_write_failed(mapping, pos + len);
if (!(err < 0) && !(MSDOS_I(inode)->i_attrs & ATTR_ARCH)) {
inode->i_mtime = inode->i_ctime = CURRENT_TIME_SEC;
MSDOS_I(inode)->i_attrs |= ATTR_ARCH;
@@ -172,7 +189,9 @@
loff_t offset, unsigned long nr_segs)
{
struct file *file = iocb->ki_filp;
- struct inode *inode = file->f_mapping->host;
+ struct address_space *mapping = file->f_mapping;
+ struct inode *inode = mapping->host;
+ ssize_t ret;
if (rw == WRITE) {
/*
@@ -193,8 +212,12 @@
* FAT need to use the DIO_LOCKING for avoiding the race
* condition of fat_get_block() and ->truncate().
*/
- return blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
- offset, nr_segs, fat_get_block, NULL);
+ ret = blockdev_direct_IO_newtrunc(rw, iocb, inode, inode->i_sb->s_bdev,
+ iov, offset, nr_segs, fat_get_block, NULL);
+ if (ret < 0 && (rw & WRITE))
+ fat_write_failed(mapping, offset + iov_length(iov, nr_segs));
+
+ return ret;
}
static sector_t _fat_bmap(struct address_space *mapping, sector_t block)
@@ -429,7 +452,7 @@
{
truncate_inode_pages(&inode->i_data, 0);
inode->i_size = 0;
- fat_truncate(inode);
+ fat_truncate_blocks(inode, 0);
clear_inode(inode);
}
diff --git a/fs/fcntl.c b/fs/fcntl.c
index f74d270..9d175d6 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -274,7 +274,7 @@
ret = copy_from_user(&owner, owner_p, sizeof(owner));
if (ret)
- return ret;
+ return -EFAULT;
switch (owner.type) {
case F_OWNER_TID:
@@ -332,8 +332,11 @@
}
read_unlock(&filp->f_owner.lock);
- if (!ret)
+ if (!ret) {
ret = copy_to_user(owner_p, &owner, sizeof(owner));
+ if (ret)
+ ret = -EFAULT;
+ }
return ret;
}
@@ -730,12 +733,14 @@
{
while (fa) {
struct fown_struct *fown;
+ unsigned long flags;
+
if (fa->magic != FASYNC_MAGIC) {
printk(KERN_ERR "kill_fasync: bad magic number in "
"fasync_struct!\n");
return;
}
- spin_lock(&fa->fa_lock);
+ spin_lock_irqsave(&fa->fa_lock, flags);
if (fa->fa_file) {
fown = &fa->fa_file->f_owner;
/* Don't send SIGURG to processes which have not set a
@@ -744,7 +749,7 @@
if (!(sig == SIGURG && fown->signum == 0))
send_sigio(fown, fa->fa_fd, band);
}
- spin_unlock(&fa->fa_lock);
+ spin_unlock_irqrestore(&fa->fa_lock, flags);
fa = rcu_dereference(fa->fa_next);
}
}
diff --git a/fs/file_table.c b/fs/file_table.c
index 32d12b7..5c7d10e 100644
--- a/fs/file_table.c
+++ b/fs/file_table.c
@@ -194,14 +194,6 @@
}
EXPORT_SYMBOL(alloc_file);
-void fput(struct file *file)
-{
- if (atomic_long_dec_and_test(&file->f_count))
- __fput(file);
-}
-
-EXPORT_SYMBOL(fput);
-
/**
* drop_file_write_access - give up ability to write to a file
* @file: the file to which we will stop writing
@@ -227,10 +219,9 @@
}
EXPORT_SYMBOL_GPL(drop_file_write_access);
-/* __fput is called from task context when aio completion releases the last
- * last use of a struct file *. Do not use otherwise.
+/* the real guts of fput() - releasing the last reference to file
*/
-void __fput(struct file *file)
+static void __fput(struct file *file)
{
struct dentry *dentry = file->f_path.dentry;
struct vfsmount *mnt = file->f_path.mnt;
@@ -268,6 +259,14 @@
mntput(mnt);
}
+void fput(struct file *file)
+{
+ if (atomic_long_dec_and_test(&file->f_count))
+ __fput(file);
+}
+
+EXPORT_SYMBOL(fput);
+
struct file *fget(unsigned int fd)
{
struct file *file;
diff --git a/fs/freevxfs/vxfs_lookup.c b/fs/freevxfs/vxfs_lookup.c
index aee049c..0ec7bb2 100644
--- a/fs/freevxfs/vxfs_lookup.c
+++ b/fs/freevxfs/vxfs_lookup.c
@@ -57,6 +57,8 @@
};
const struct file_operations vxfs_dir_operations = {
+ .llseek = generic_file_llseek,
+ .read = generic_read_dir,
.readdir = vxfs_readdir,
};
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index ea8592b..d5be169 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -38,52 +38,18 @@
/*
* Passed into wb_writeback(), essentially a subset of writeback_control
*/
-struct wb_writeback_args {
+struct wb_writeback_work {
long nr_pages;
struct super_block *sb;
enum writeback_sync_modes sync_mode;
unsigned int for_kupdate:1;
unsigned int range_cyclic:1;
unsigned int for_background:1;
- unsigned int sb_pinned:1;
-};
-/*
- * Work items for the bdi_writeback threads
- */
-struct bdi_work {
struct list_head list; /* pending work list */
- struct rcu_head rcu_head; /* for RCU free/clear of work */
-
- unsigned long seen; /* threads that have seen this work */
- atomic_t pending; /* number of threads still to do work */
-
- struct wb_writeback_args args; /* writeback arguments */
-
- unsigned long state; /* flag bits, see WS_* */
+ struct completion *done; /* set if the caller waits */
};
-enum {
- WS_USED_B = 0,
- WS_ONSTACK_B,
-};
-
-#define WS_USED (1 << WS_USED_B)
-#define WS_ONSTACK (1 << WS_ONSTACK_B)
-
-static inline bool bdi_work_on_stack(struct bdi_work *work)
-{
- return test_bit(WS_ONSTACK_B, &work->state);
-}
-
-static inline void bdi_work_init(struct bdi_work *work,
- struct wb_writeback_args *args)
-{
- INIT_RCU_HEAD(&work->rcu_head);
- work->args = *args;
- work->state = WS_USED;
-}
-
/**
* writeback_in_progress - determine whether there is writeback in progress
* @bdi: the device's backing_dev_info structure.
@@ -96,76 +62,11 @@
return !list_empty(&bdi->work_list);
}
-static void bdi_work_clear(struct bdi_work *work)
+static void bdi_queue_work(struct backing_dev_info *bdi,
+ struct wb_writeback_work *work)
{
- clear_bit(WS_USED_B, &work->state);
- smp_mb__after_clear_bit();
- /*
- * work can have disappeared at this point. bit waitq functions
- * should be able to tolerate this, provided bdi_sched_wait does
- * not dereference it's pointer argument.
- */
- wake_up_bit(&work->state, WS_USED_B);
-}
-
-static void bdi_work_free(struct rcu_head *head)
-{
- struct bdi_work *work = container_of(head, struct bdi_work, rcu_head);
-
- if (!bdi_work_on_stack(work))
- kfree(work);
- else
- bdi_work_clear(work);
-}
-
-static void wb_work_complete(struct bdi_work *work)
-{
- const enum writeback_sync_modes sync_mode = work->args.sync_mode;
- int onstack = bdi_work_on_stack(work);
-
- /*
- * For allocated work, we can clear the done/seen bit right here.
- * For on-stack work, we need to postpone both the clear and free
- * to after the RCU grace period, since the stack could be invalidated
- * as soon as bdi_work_clear() has done the wakeup.
- */
- if (!onstack)
- bdi_work_clear(work);
- if (sync_mode == WB_SYNC_NONE || onstack)
- call_rcu(&work->rcu_head, bdi_work_free);
-}
-
-static void wb_clear_pending(struct bdi_writeback *wb, struct bdi_work *work)
-{
- /*
- * The caller has retrieved the work arguments from this work,
- * drop our reference. If this is the last ref, delete and free it
- */
- if (atomic_dec_and_test(&work->pending)) {
- struct backing_dev_info *bdi = wb->bdi;
-
- spin_lock(&bdi->wb_lock);
- list_del_rcu(&work->list);
- spin_unlock(&bdi->wb_lock);
-
- wb_work_complete(work);
- }
-}
-
-static void bdi_queue_work(struct backing_dev_info *bdi, struct bdi_work *work)
-{
- work->seen = bdi->wb_mask;
- BUG_ON(!work->seen);
- atomic_set(&work->pending, bdi->wb_cnt);
- BUG_ON(!bdi->wb_cnt);
-
- /*
- * list_add_tail_rcu() contains the necessary barriers to
- * make sure the above stores are seen before the item is
- * noticed on the list
- */
spin_lock(&bdi->wb_lock);
- list_add_tail_rcu(&work->list, &bdi->work_list);
+ list_add_tail(&work->list, &bdi->work_list);
spin_unlock(&bdi->wb_lock);
/*
@@ -182,107 +83,59 @@
}
}
-/*
- * Used for on-stack allocated work items. The caller needs to wait until
- * the wb threads have acked the work before it's safe to continue.
- */
-static void bdi_wait_on_work_clear(struct bdi_work *work)
+static void
+__bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages,
+ bool range_cyclic, bool for_background)
{
- wait_on_bit(&work->state, WS_USED_B, bdi_sched_wait,
- TASK_UNINTERRUPTIBLE);
-}
-
-static void bdi_alloc_queue_work(struct backing_dev_info *bdi,
- struct wb_writeback_args *args,
- int wait)
-{
- struct bdi_work *work;
+ struct wb_writeback_work *work;
/*
* This is WB_SYNC_NONE writeback, so if allocation fails just
* wakeup the thread for old dirty data writeback
*/
- work = kmalloc(sizeof(*work), GFP_ATOMIC);
- if (work) {
- bdi_work_init(work, args);
- bdi_queue_work(bdi, work);
- if (wait)
- bdi_wait_on_work_clear(work);
- } else {
- struct bdi_writeback *wb = &bdi->wb;
-
- if (wb->task)
- wake_up_process(wb->task);
+ work = kzalloc(sizeof(*work), GFP_ATOMIC);
+ if (!work) {
+ if (bdi->wb.task)
+ wake_up_process(bdi->wb.task);
+ return;
}
-}
-/**
- * bdi_sync_writeback - start and wait for writeback
- * @bdi: the backing device to write from
- * @sb: write inodes from this super_block
- *
- * Description:
- * This does WB_SYNC_ALL data integrity writeback and waits for the
- * IO to complete. Callers must hold the sb s_umount semaphore for
- * reading, to avoid having the super disappear before we are done.
- */
-static void bdi_sync_writeback(struct backing_dev_info *bdi,
- struct super_block *sb)
-{
- struct wb_writeback_args args = {
- .sb = sb,
- .sync_mode = WB_SYNC_ALL,
- .nr_pages = LONG_MAX,
- .range_cyclic = 0,
- /*
- * Setting sb_pinned is not necessary for WB_SYNC_ALL, but
- * lets make it explicitly clear.
- */
- .sb_pinned = 1,
- };
- struct bdi_work work;
+ work->sync_mode = WB_SYNC_NONE;
+ work->nr_pages = nr_pages;
+ work->range_cyclic = range_cyclic;
+ work->for_background = for_background;
- bdi_work_init(&work, &args);
- work.state |= WS_ONSTACK;
-
- bdi_queue_work(bdi, &work);
- bdi_wait_on_work_clear(&work);
+ bdi_queue_work(bdi, work);
}
/**
* bdi_start_writeback - start writeback
* @bdi: the backing device to write from
- * @sb: write inodes from this super_block
* @nr_pages: the number of pages to write
- * @sb_locked: caller already holds sb umount sem.
*
* Description:
* This does WB_SYNC_NONE opportunistic writeback. The IO is only
* started when this function returns, we make no guarentees on
- * completion. Caller specifies whether sb umount sem is held already or not.
+ * completion. Caller need not hold sb s_umount semaphore.
*
*/
-void bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb,
- long nr_pages, int sb_locked)
+void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages)
{
- struct wb_writeback_args args = {
- .sb = sb,
- .sync_mode = WB_SYNC_NONE,
- .nr_pages = nr_pages,
- .range_cyclic = 1,
- .sb_pinned = sb_locked,
- };
+ __bdi_start_writeback(bdi, nr_pages, true, false);
+}
- /*
- * We treat @nr_pages=0 as the special case to do background writeback,
- * ie. to sync pages until the background dirty threshold is reached.
- */
- if (!nr_pages) {
- args.nr_pages = LONG_MAX;
- args.for_background = 1;
- }
-
- bdi_alloc_queue_work(bdi, &args, sb_locked);
+/**
+ * bdi_start_background_writeback - start background writeback
+ * @bdi: the backing device to write from
+ *
+ * Description:
+ * This does WB_SYNC_NONE background writeback. The IO is only
+ * started when this function returns, we make no guarentees on
+ * completion. Caller need not hold sb s_umount semaphore.
+ */
+void bdi_start_background_writeback(struct backing_dev_info *bdi)
+{
+ __bdi_start_writeback(bdi, LONG_MAX, true, true);
}
/*
@@ -572,75 +425,69 @@
return ret;
}
-static void unpin_sb_for_writeback(struct super_block *sb)
-{
- up_read(&sb->s_umount);
- put_super(sb);
-}
-
-enum sb_pin_state {
- SB_PINNED,
- SB_NOT_PINNED,
- SB_PIN_FAILED
-};
-
/*
- * For WB_SYNC_NONE writeback, the caller does not have the sb pinned
+ * For background writeback the caller does not have the sb pinned
* before calling writeback. So make sure that we do pin it, so it doesn't
* go away while we are writing inodes from it.
*/
-static enum sb_pin_state pin_sb_for_writeback(struct writeback_control *wbc,
- struct super_block *sb)
+static bool pin_sb_for_writeback(struct super_block *sb)
{
- /*
- * Caller must already hold the ref for this
- */
- if (wbc->sync_mode == WB_SYNC_ALL || wbc->sb_pinned) {
- WARN_ON(!rwsem_is_locked(&sb->s_umount));
- return SB_NOT_PINNED;
- }
spin_lock(&sb_lock);
+ if (list_empty(&sb->s_instances)) {
+ spin_unlock(&sb_lock);
+ return false;
+ }
+
sb->s_count++;
+ spin_unlock(&sb_lock);
+
if (down_read_trylock(&sb->s_umount)) {
- if (sb->s_root) {
- spin_unlock(&sb_lock);
- return SB_PINNED;
- }
- /*
- * umounted, drop rwsem again and fall through to failure
- */
+ if (sb->s_root)
+ return true;
up_read(&sb->s_umount);
}
- sb->s_count--;
- spin_unlock(&sb_lock);
- return SB_PIN_FAILED;
+
+ put_super(sb);
+ return false;
}
/*
* Write a portion of b_io inodes which belong to @sb.
- * If @wbc->sb != NULL, then find and write all such
+ *
+ * If @only_this_sb is true, then find and write all such
* inodes. Otherwise write only ones which go sequentially
* in reverse order.
+ *
* Return 1, if the caller writeback routine should be
* interrupted. Otherwise return 0.
*/
-static int writeback_sb_inodes(struct super_block *sb,
- struct bdi_writeback *wb,
- struct writeback_control *wbc)
+static int writeback_sb_inodes(struct super_block *sb, struct bdi_writeback *wb,
+ struct writeback_control *wbc, bool only_this_sb)
{
while (!list_empty(&wb->b_io)) {
long pages_skipped;
struct inode *inode = list_entry(wb->b_io.prev,
struct inode, i_list);
- if (wbc->sb && sb != inode->i_sb) {
- /* super block given and doesn't
- match, skip this inode */
- redirty_tail(inode);
- continue;
- }
- if (sb != inode->i_sb)
- /* finish with this superblock */
+
+ if (inode->i_sb != sb) {
+ if (only_this_sb) {
+ /*
+ * We only want to write back data for this
+ * superblock, move all inodes not belonging
+ * to it back onto the dirty list.
+ */
+ redirty_tail(inode);
+ continue;
+ }
+
+ /*
+ * The inode belongs to a different superblock.
+ * Bounce back to the caller to unpin this and
+ * pin the next superblock.
+ */
return 0;
+ }
+
if (inode->i_state & (I_NEW | I_WILL_FREE)) {
requeue_io(inode);
continue;
@@ -678,8 +525,8 @@
return 1;
}
-static void writeback_inodes_wb(struct bdi_writeback *wb,
- struct writeback_control *wbc)
+void writeback_inodes_wb(struct bdi_writeback *wb,
+ struct writeback_control *wbc)
{
int ret = 0;
@@ -692,24 +539,14 @@
struct inode *inode = list_entry(wb->b_io.prev,
struct inode, i_list);
struct super_block *sb = inode->i_sb;
- enum sb_pin_state state;
- if (wbc->sb && sb != wbc->sb) {
- /* super block given and doesn't
- match, skip this inode */
- redirty_tail(inode);
- continue;
- }
- state = pin_sb_for_writeback(wbc, sb);
-
- if (state == SB_PIN_FAILED) {
+ if (!pin_sb_for_writeback(sb)) {
requeue_io(inode);
continue;
}
- ret = writeback_sb_inodes(sb, wb, wbc);
+ ret = writeback_sb_inodes(sb, wb, wbc, false);
+ drop_super(sb);
- if (state == SB_PINNED)
- unpin_sb_for_writeback(sb);
if (ret)
break;
}
@@ -717,11 +554,17 @@
/* Leave any unwritten inodes on b_io */
}
-void writeback_inodes_wbc(struct writeback_control *wbc)
+static void __writeback_inodes_sb(struct super_block *sb,
+ struct bdi_writeback *wb, struct writeback_control *wbc)
{
- struct backing_dev_info *bdi = wbc->bdi;
+ WARN_ON(!rwsem_is_locked(&sb->s_umount));
- writeback_inodes_wb(&bdi->wb, wbc);
+ wbc->wb_start = jiffies; /* livelock avoidance */
+ spin_lock(&inode_lock);
+ if (!wbc->for_kupdate || list_empty(&wb->b_io))
+ queue_io(wb, wbc->older_than_this);
+ writeback_sb_inodes(sb, wb, wbc, true);
+ spin_unlock(&inode_lock);
}
/*
@@ -759,17 +602,14 @@
* all dirty pages if they are all attached to "old" mappings.
*/
static long wb_writeback(struct bdi_writeback *wb,
- struct wb_writeback_args *args)
+ struct wb_writeback_work *work)
{
struct writeback_control wbc = {
- .bdi = wb->bdi,
- .sb = args->sb,
- .sync_mode = args->sync_mode,
+ .sync_mode = work->sync_mode,
.older_than_this = NULL,
- .for_kupdate = args->for_kupdate,
- .for_background = args->for_background,
- .range_cyclic = args->range_cyclic,
- .sb_pinned = args->sb_pinned,
+ .for_kupdate = work->for_kupdate,
+ .for_background = work->for_background,
+ .range_cyclic = work->range_cyclic,
};
unsigned long oldest_jif;
long wrote = 0;
@@ -789,21 +629,24 @@
/*
* Stop writeback when nr_pages has been consumed
*/
- if (args->nr_pages <= 0)
+ if (work->nr_pages <= 0)
break;
/*
* For background writeout, stop when we are below the
* background dirty threshold
*/
- if (args->for_background && !over_bground_thresh())
+ if (work->for_background && !over_bground_thresh())
break;
wbc.more_io = 0;
wbc.nr_to_write = MAX_WRITEBACK_PAGES;
wbc.pages_skipped = 0;
- writeback_inodes_wb(wb, &wbc);
- args->nr_pages -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
+ if (work->sb)
+ __writeback_inodes_sb(work->sb, wb, &wbc);
+ else
+ writeback_inodes_wb(wb, &wbc);
+ work->nr_pages -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
wrote += MAX_WRITEBACK_PAGES - wbc.nr_to_write;
/*
@@ -839,31 +682,21 @@
}
/*
- * Return the next bdi_work struct that hasn't been processed by this
- * wb thread yet. ->seen is initially set for each thread that exists
- * for this device, when a thread first notices a piece of work it
- * clears its bit. Depending on writeback type, the thread will notify
- * completion on either receiving the work (WB_SYNC_NONE) or after
- * it is done (WB_SYNC_ALL).
+ * Return the next wb_writeback_work struct that hasn't been processed yet.
*/
-static struct bdi_work *get_next_work_item(struct backing_dev_info *bdi,
- struct bdi_writeback *wb)
+static struct wb_writeback_work *
+get_next_work_item(struct backing_dev_info *bdi, struct bdi_writeback *wb)
{
- struct bdi_work *work, *ret = NULL;
+ struct wb_writeback_work *work = NULL;
- rcu_read_lock();
-
- list_for_each_entry_rcu(work, &bdi->work_list, list) {
- if (!test_bit(wb->nr, &work->seen))
- continue;
- clear_bit(wb->nr, &work->seen);
-
- ret = work;
- break;
+ spin_lock(&bdi->wb_lock);
+ if (!list_empty(&bdi->work_list)) {
+ work = list_entry(bdi->work_list.next,
+ struct wb_writeback_work, list);
+ list_del_init(&work->list);
}
-
- rcu_read_unlock();
- return ret;
+ spin_unlock(&bdi->wb_lock);
+ return work;
}
static long wb_check_old_data_flush(struct bdi_writeback *wb)
@@ -888,14 +721,14 @@
(inodes_stat.nr_inodes - inodes_stat.nr_unused);
if (nr_pages) {
- struct wb_writeback_args args = {
+ struct wb_writeback_work work = {
.nr_pages = nr_pages,
.sync_mode = WB_SYNC_NONE,
.for_kupdate = 1,
.range_cyclic = 1,
};
- return wb_writeback(wb, &args);
+ return wb_writeback(wb, &work);
}
return 0;
@@ -907,36 +740,27 @@
long wb_do_writeback(struct bdi_writeback *wb, int force_wait)
{
struct backing_dev_info *bdi = wb->bdi;
- struct bdi_work *work;
+ struct wb_writeback_work *work;
long wrote = 0;
while ((work = get_next_work_item(bdi, wb)) != NULL) {
- struct wb_writeback_args args = work->args;
- int post_clear;
-
/*
* Override sync mode, in case we must wait for completion
+ * because this thread is exiting now.
*/
if (force_wait)
- work->args.sync_mode = args.sync_mode = WB_SYNC_ALL;
+ work->sync_mode = WB_SYNC_ALL;
- post_clear = WB_SYNC_ALL || args.sb_pinned;
+ wrote += wb_writeback(wb, work);
/*
- * If this isn't a data integrity operation, just notify
- * that we have seen this work and we are now starting it.
+ * Notify the caller of completion if this is a synchronous
+ * work item, otherwise just free it.
*/
- if (!post_clear)
- wb_clear_pending(wb, work);
-
- wrote += wb_writeback(wb, &args);
-
- /*
- * This is a data integrity writeback, so only do the
- * notification when we have completed the work.
- */
- if (post_clear)
- wb_clear_pending(wb, work);
+ if (work->done)
+ complete(work->done);
+ else
+ kfree(work);
}
/*
@@ -993,40 +817,25 @@
}
/*
- * Schedule writeback for all backing devices. This does WB_SYNC_NONE
- * writeback, for integrity writeback see bdi_sync_writeback().
- */
-static void bdi_writeback_all(struct super_block *sb, long nr_pages)
-{
- struct wb_writeback_args args = {
- .sb = sb,
- .nr_pages = nr_pages,
- .sync_mode = WB_SYNC_NONE,
- };
- struct backing_dev_info *bdi;
-
- rcu_read_lock();
-
- list_for_each_entry_rcu(bdi, &bdi_list, bdi_list) {
- if (!bdi_has_dirty_io(bdi))
- continue;
-
- bdi_alloc_queue_work(bdi, &args, 0);
- }
-
- rcu_read_unlock();
-}
-
-/*
* Start writeback of `nr_pages' pages. If `nr_pages' is zero, write back
* the whole world.
*/
void wakeup_flusher_threads(long nr_pages)
{
- if (nr_pages == 0)
+ struct backing_dev_info *bdi;
+
+ if (!nr_pages) {
nr_pages = global_page_state(NR_FILE_DIRTY) +
global_page_state(NR_UNSTABLE_NFS);
- bdi_writeback_all(NULL, nr_pages);
+ }
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(bdi, &bdi_list, bdi_list) {
+ if (!bdi_has_dirty_io(bdi))
+ continue;
+ __bdi_start_writeback(bdi, nr_pages, false, false);
+ }
+ rcu_read_unlock();
}
static noinline void block_dump___mark_inode_dirty(struct inode *inode)
@@ -1220,18 +1029,6 @@
iput(old_inode);
}
-static void __writeback_inodes_sb(struct super_block *sb, int sb_locked)
-{
- unsigned long nr_dirty = global_page_state(NR_FILE_DIRTY);
- unsigned long nr_unstable = global_page_state(NR_UNSTABLE_NFS);
- long nr_to_write;
-
- nr_to_write = nr_dirty + nr_unstable +
- (inodes_stat.nr_inodes - inodes_stat.nr_unused);
-
- bdi_start_writeback(sb->s_bdi, sb, nr_to_write, sb_locked);
-}
-
/**
* writeback_inodes_sb - writeback dirty inodes from given super_block
* @sb: the superblock
@@ -1243,23 +1040,26 @@
*/
void writeback_inodes_sb(struct super_block *sb)
{
- __writeback_inodes_sb(sb, 0);
+ unsigned long nr_dirty = global_page_state(NR_FILE_DIRTY);
+ unsigned long nr_unstable = global_page_state(NR_UNSTABLE_NFS);
+ DECLARE_COMPLETION_ONSTACK(done);
+ struct wb_writeback_work work = {
+ .sb = sb,
+ .sync_mode = WB_SYNC_NONE,
+ .done = &done,
+ };
+
+ WARN_ON(!rwsem_is_locked(&sb->s_umount));
+
+ work.nr_pages = nr_dirty + nr_unstable +
+ (inodes_stat.nr_inodes - inodes_stat.nr_unused);
+
+ bdi_queue_work(sb->s_bdi, &work);
+ wait_for_completion(&done);
}
EXPORT_SYMBOL(writeback_inodes_sb);
/**
- * writeback_inodes_sb_locked - writeback dirty inodes from given super_block
- * @sb: the superblock
- *
- * Like writeback_inodes_sb(), except the caller already holds the
- * sb umount sem.
- */
-void writeback_inodes_sb_locked(struct super_block *sb)
-{
- __writeback_inodes_sb(sb, 1);
-}
-
-/**
* writeback_inodes_sb_if_idle - start writeback if none underway
* @sb: the superblock
*
@@ -1269,7 +1069,9 @@
int writeback_inodes_sb_if_idle(struct super_block *sb)
{
if (!writeback_in_progress(sb->s_bdi)) {
+ down_read(&sb->s_umount);
writeback_inodes_sb(sb);
+ up_read(&sb->s_umount);
return 1;
} else
return 0;
@@ -1285,7 +1087,20 @@
*/
void sync_inodes_sb(struct super_block *sb)
{
- bdi_sync_writeback(sb->s_bdi, sb);
+ DECLARE_COMPLETION_ONSTACK(done);
+ struct wb_writeback_work work = {
+ .sb = sb,
+ .sync_mode = WB_SYNC_ALL,
+ .nr_pages = LONG_MAX,
+ .range_cyclic = 0,
+ .done = &done,
+ };
+
+ WARN_ON(!rwsem_is_locked(&sb->s_umount));
+
+ bdi_queue_work(sb->s_bdi, &work);
+ wait_for_completion(&done);
+
wait_sb_inodes(sb);
}
EXPORT_SYMBOL(sync_inodes_sb);
diff --git a/fs/fscache/object-list.c b/fs/fscache/object-list.c
index 1e1f286..4a8eb31 100644
--- a/fs/fscache/object-list.c
+++ b/fs/fscache/object-list.c
@@ -103,7 +103,7 @@
/* banners (can't represent line 0 by pos 0 as that would involve
* returning a NULL pointer) */
if (pos == 0)
- return (struct fscache_object *) ++(*_pos);
+ return (struct fscache_object *)(long)++(*_pos);
if (pos < 3)
return (struct fscache_object *)pos;
diff --git a/fs/fscache/page.c b/fs/fscache/page.c
index 47aefd3..723b889 100644
--- a/fs/fscache/page.c
+++ b/fs/fscache/page.c
@@ -710,30 +710,26 @@
goto superseded;
}
- if (page) {
- radix_tree_tag_set(&cookie->stores, page->index,
- FSCACHE_COOKIE_STORING_TAG);
- radix_tree_tag_clear(&cookie->stores, page->index,
- FSCACHE_COOKIE_PENDING_TAG);
- }
+ radix_tree_tag_set(&cookie->stores, page->index,
+ FSCACHE_COOKIE_STORING_TAG);
+ radix_tree_tag_clear(&cookie->stores, page->index,
+ FSCACHE_COOKIE_PENDING_TAG);
spin_unlock(&cookie->stores_lock);
spin_unlock(&object->lock);
- if (page) {
- fscache_set_op_state(&op->op, "Store");
- fscache_stat(&fscache_n_store_pages);
- fscache_stat(&fscache_n_cop_write_page);
- ret = object->cache->ops->write_page(op, page);
- fscache_stat_d(&fscache_n_cop_write_page);
- fscache_set_op_state(&op->op, "EndWrite");
- fscache_end_page_write(object, page);
- if (ret < 0) {
- fscache_set_op_state(&op->op, "Abort");
- fscache_abort_object(object);
- } else {
- fscache_enqueue_operation(&op->op);
- }
+ fscache_set_op_state(&op->op, "Store");
+ fscache_stat(&fscache_n_store_pages);
+ fscache_stat(&fscache_n_cop_write_page);
+ ret = object->cache->ops->write_page(op, page);
+ fscache_stat_d(&fscache_n_cop_write_page);
+ fscache_set_op_state(&op->op, "EndWrite");
+ fscache_end_page_write(object, page);
+ if (ret < 0) {
+ fscache_set_op_state(&op->op, "Abort");
+ fscache_abort_object(object);
+ } else {
+ fscache_enqueue_operation(&op->op);
}
_leave("");
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index e53df5e..9424796 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -16,6 +16,9 @@
#include <linux/pagemap.h>
#include <linux/file.h>
#include <linux/slab.h>
+#include <linux/pipe_fs_i.h>
+#include <linux/swap.h>
+#include <linux/splice.h>
MODULE_ALIAS_MISCDEV(FUSE_MINOR);
MODULE_ALIAS("devname:fuse");
@@ -499,6 +502,9 @@
int write;
struct fuse_req *req;
const struct iovec *iov;
+ struct pipe_buffer *pipebufs;
+ struct pipe_buffer *currbuf;
+ struct pipe_inode_info *pipe;
unsigned long nr_segs;
unsigned long seglen;
unsigned long addr;
@@ -506,16 +512,16 @@
void *mapaddr;
void *buf;
unsigned len;
+ unsigned move_pages:1;
};
static void fuse_copy_init(struct fuse_copy_state *cs, struct fuse_conn *fc,
- int write, struct fuse_req *req,
+ int write,
const struct iovec *iov, unsigned long nr_segs)
{
memset(cs, 0, sizeof(*cs));
cs->fc = fc;
cs->write = write;
- cs->req = req;
cs->iov = iov;
cs->nr_segs = nr_segs;
}
@@ -523,7 +529,18 @@
/* Unmap and put previous page of userspace buffer */
static void fuse_copy_finish(struct fuse_copy_state *cs)
{
- if (cs->mapaddr) {
+ if (cs->currbuf) {
+ struct pipe_buffer *buf = cs->currbuf;
+
+ if (!cs->write) {
+ buf->ops->unmap(cs->pipe, buf, cs->mapaddr);
+ } else {
+ kunmap_atomic(cs->mapaddr, KM_USER0);
+ buf->len = PAGE_SIZE - cs->len;
+ }
+ cs->currbuf = NULL;
+ cs->mapaddr = NULL;
+ } else if (cs->mapaddr) {
kunmap_atomic(cs->mapaddr, KM_USER0);
if (cs->write) {
flush_dcache_page(cs->pg);
@@ -545,26 +562,61 @@
unlock_request(cs->fc, cs->req);
fuse_copy_finish(cs);
- if (!cs->seglen) {
- BUG_ON(!cs->nr_segs);
- cs->seglen = cs->iov[0].iov_len;
- cs->addr = (unsigned long) cs->iov[0].iov_base;
- cs->iov++;
- cs->nr_segs--;
+ if (cs->pipebufs) {
+ struct pipe_buffer *buf = cs->pipebufs;
+
+ if (!cs->write) {
+ err = buf->ops->confirm(cs->pipe, buf);
+ if (err)
+ return err;
+
+ BUG_ON(!cs->nr_segs);
+ cs->currbuf = buf;
+ cs->mapaddr = buf->ops->map(cs->pipe, buf, 1);
+ cs->len = buf->len;
+ cs->buf = cs->mapaddr + buf->offset;
+ cs->pipebufs++;
+ cs->nr_segs--;
+ } else {
+ struct page *page;
+
+ if (cs->nr_segs == cs->pipe->buffers)
+ return -EIO;
+
+ page = alloc_page(GFP_HIGHUSER);
+ if (!page)
+ return -ENOMEM;
+
+ buf->page = page;
+ buf->offset = 0;
+ buf->len = 0;
+
+ cs->currbuf = buf;
+ cs->mapaddr = kmap_atomic(page, KM_USER0);
+ cs->buf = cs->mapaddr;
+ cs->len = PAGE_SIZE;
+ cs->pipebufs++;
+ cs->nr_segs++;
+ }
+ } else {
+ if (!cs->seglen) {
+ BUG_ON(!cs->nr_segs);
+ cs->seglen = cs->iov[0].iov_len;
+ cs->addr = (unsigned long) cs->iov[0].iov_base;
+ cs->iov++;
+ cs->nr_segs--;
+ }
+ err = get_user_pages_fast(cs->addr, 1, cs->write, &cs->pg);
+ if (err < 0)
+ return err;
+ BUG_ON(err != 1);
+ offset = cs->addr % PAGE_SIZE;
+ cs->mapaddr = kmap_atomic(cs->pg, KM_USER0);
+ cs->buf = cs->mapaddr + offset;
+ cs->len = min(PAGE_SIZE - offset, cs->seglen);
+ cs->seglen -= cs->len;
+ cs->addr += cs->len;
}
- down_read(¤t->mm->mmap_sem);
- err = get_user_pages(current, current->mm, cs->addr, 1, cs->write, 0,
- &cs->pg, NULL);
- up_read(¤t->mm->mmap_sem);
- if (err < 0)
- return err;
- BUG_ON(err != 1);
- offset = cs->addr % PAGE_SIZE;
- cs->mapaddr = kmap_atomic(cs->pg, KM_USER0);
- cs->buf = cs->mapaddr + offset;
- cs->len = min(PAGE_SIZE - offset, cs->seglen);
- cs->seglen -= cs->len;
- cs->addr += cs->len;
return lock_request(cs->fc, cs->req);
}
@@ -586,23 +638,178 @@
return ncpy;
}
+static int fuse_check_page(struct page *page)
+{
+ if (page_mapcount(page) ||
+ page->mapping != NULL ||
+ page_count(page) != 1 ||
+ (page->flags & PAGE_FLAGS_CHECK_AT_PREP &
+ ~(1 << PG_locked |
+ 1 << PG_referenced |
+ 1 << PG_uptodate |
+ 1 << PG_lru |
+ 1 << PG_active |
+ 1 << PG_reclaim))) {
+ printk(KERN_WARNING "fuse: trying to steal weird page\n");
+ printk(KERN_WARNING " page=%p index=%li flags=%08lx, count=%i, mapcount=%i, mapping=%p\n", page, page->index, page->flags, page_count(page), page_mapcount(page), page->mapping);
+ return 1;
+ }
+ return 0;
+}
+
+static int fuse_try_move_page(struct fuse_copy_state *cs, struct page **pagep)
+{
+ int err;
+ struct page *oldpage = *pagep;
+ struct page *newpage;
+ struct pipe_buffer *buf = cs->pipebufs;
+ struct address_space *mapping;
+ pgoff_t index;
+
+ unlock_request(cs->fc, cs->req);
+ fuse_copy_finish(cs);
+
+ err = buf->ops->confirm(cs->pipe, buf);
+ if (err)
+ return err;
+
+ BUG_ON(!cs->nr_segs);
+ cs->currbuf = buf;
+ cs->len = buf->len;
+ cs->pipebufs++;
+ cs->nr_segs--;
+
+ if (cs->len != PAGE_SIZE)
+ goto out_fallback;
+
+ if (buf->ops->steal(cs->pipe, buf) != 0)
+ goto out_fallback;
+
+ newpage = buf->page;
+
+ if (WARN_ON(!PageUptodate(newpage)))
+ return -EIO;
+
+ ClearPageMappedToDisk(newpage);
+
+ if (fuse_check_page(newpage) != 0)
+ goto out_fallback_unlock;
+
+ mapping = oldpage->mapping;
+ index = oldpage->index;
+
+ /*
+ * This is a new and locked page, it shouldn't be mapped or
+ * have any special flags on it
+ */
+ if (WARN_ON(page_mapped(oldpage)))
+ goto out_fallback_unlock;
+ if (WARN_ON(page_has_private(oldpage)))
+ goto out_fallback_unlock;
+ if (WARN_ON(PageDirty(oldpage) || PageWriteback(oldpage)))
+ goto out_fallback_unlock;
+ if (WARN_ON(PageMlocked(oldpage)))
+ goto out_fallback_unlock;
+
+ remove_from_page_cache(oldpage);
+ page_cache_release(oldpage);
+
+ err = add_to_page_cache_locked(newpage, mapping, index, GFP_KERNEL);
+ if (err) {
+ printk(KERN_WARNING "fuse_try_move_page: failed to add page");
+ goto out_fallback_unlock;
+ }
+ page_cache_get(newpage);
+
+ if (!(buf->flags & PIPE_BUF_FLAG_LRU))
+ lru_cache_add_file(newpage);
+
+ err = 0;
+ spin_lock(&cs->fc->lock);
+ if (cs->req->aborted)
+ err = -ENOENT;
+ else
+ *pagep = newpage;
+ spin_unlock(&cs->fc->lock);
+
+ if (err) {
+ unlock_page(newpage);
+ page_cache_release(newpage);
+ return err;
+ }
+
+ unlock_page(oldpage);
+ page_cache_release(oldpage);
+ cs->len = 0;
+
+ return 0;
+
+out_fallback_unlock:
+ unlock_page(newpage);
+out_fallback:
+ cs->mapaddr = buf->ops->map(cs->pipe, buf, 1);
+ cs->buf = cs->mapaddr + buf->offset;
+
+ err = lock_request(cs->fc, cs->req);
+ if (err)
+ return err;
+
+ return 1;
+}
+
+static int fuse_ref_page(struct fuse_copy_state *cs, struct page *page,
+ unsigned offset, unsigned count)
+{
+ struct pipe_buffer *buf;
+
+ if (cs->nr_segs == cs->pipe->buffers)
+ return -EIO;
+
+ unlock_request(cs->fc, cs->req);
+ fuse_copy_finish(cs);
+
+ buf = cs->pipebufs;
+ page_cache_get(page);
+ buf->page = page;
+ buf->offset = offset;
+ buf->len = count;
+
+ cs->pipebufs++;
+ cs->nr_segs++;
+ cs->len = 0;
+
+ return 0;
+}
+
/*
* Copy a page in the request to/from the userspace buffer. Must be
* done atomically
*/
-static int fuse_copy_page(struct fuse_copy_state *cs, struct page *page,
+static int fuse_copy_page(struct fuse_copy_state *cs, struct page **pagep,
unsigned offset, unsigned count, int zeroing)
{
+ int err;
+ struct page *page = *pagep;
+
if (page && zeroing && count < PAGE_SIZE) {
void *mapaddr = kmap_atomic(page, KM_USER1);
memset(mapaddr, 0, PAGE_SIZE);
kunmap_atomic(mapaddr, KM_USER1);
}
while (count) {
- if (!cs->len) {
- int err = fuse_copy_fill(cs);
- if (err)
- return err;
+ if (cs->write && cs->pipebufs && page) {
+ return fuse_ref_page(cs, page, offset, count);
+ } else if (!cs->len) {
+ if (cs->move_pages && page &&
+ offset == 0 && count == PAGE_SIZE) {
+ err = fuse_try_move_page(cs, pagep);
+ if (err <= 0)
+ return err;
+ } else {
+ err = fuse_copy_fill(cs);
+ if (err)
+ return err;
+ }
}
if (page) {
void *mapaddr = kmap_atomic(page, KM_USER1);
@@ -627,8 +834,10 @@
unsigned count = min(nbytes, (unsigned) PAGE_SIZE - offset);
for (i = 0; i < req->num_pages && (nbytes || zeroing); i++) {
- struct page *page = req->pages[i];
- int err = fuse_copy_page(cs, page, offset, count, zeroing);
+ int err;
+
+ err = fuse_copy_page(cs, &req->pages[i], offset, count,
+ zeroing);
if (err)
return err;
@@ -705,11 +914,10 @@
*
* Called with fc->lock held, releases it
*/
-static int fuse_read_interrupt(struct fuse_conn *fc, struct fuse_req *req,
- const struct iovec *iov, unsigned long nr_segs)
+static int fuse_read_interrupt(struct fuse_conn *fc, struct fuse_copy_state *cs,
+ size_t nbytes, struct fuse_req *req)
__releases(&fc->lock)
{
- struct fuse_copy_state cs;
struct fuse_in_header ih;
struct fuse_interrupt_in arg;
unsigned reqsize = sizeof(ih) + sizeof(arg);
@@ -725,14 +933,13 @@
arg.unique = req->in.h.unique;
spin_unlock(&fc->lock);
- if (iov_length(iov, nr_segs) < reqsize)
+ if (nbytes < reqsize)
return -EINVAL;
- fuse_copy_init(&cs, fc, 1, NULL, iov, nr_segs);
- err = fuse_copy_one(&cs, &ih, sizeof(ih));
+ err = fuse_copy_one(cs, &ih, sizeof(ih));
if (!err)
- err = fuse_copy_one(&cs, &arg, sizeof(arg));
- fuse_copy_finish(&cs);
+ err = fuse_copy_one(cs, &arg, sizeof(arg));
+ fuse_copy_finish(cs);
return err ? err : reqsize;
}
@@ -746,18 +953,13 @@
* request_end(). Otherwise add it to the processing list, and set
* the 'sent' flag.
*/
-static ssize_t fuse_dev_read(struct kiocb *iocb, const struct iovec *iov,
- unsigned long nr_segs, loff_t pos)
+static ssize_t fuse_dev_do_read(struct fuse_conn *fc, struct file *file,
+ struct fuse_copy_state *cs, size_t nbytes)
{
int err;
struct fuse_req *req;
struct fuse_in *in;
- struct fuse_copy_state cs;
unsigned reqsize;
- struct file *file = iocb->ki_filp;
- struct fuse_conn *fc = fuse_get_conn(file);
- if (!fc)
- return -EPERM;
restart:
spin_lock(&fc->lock);
@@ -777,7 +979,7 @@
if (!list_empty(&fc->interrupts)) {
req = list_entry(fc->interrupts.next, struct fuse_req,
intr_entry);
- return fuse_read_interrupt(fc, req, iov, nr_segs);
+ return fuse_read_interrupt(fc, cs, nbytes, req);
}
req = list_entry(fc->pending.next, struct fuse_req, list);
@@ -787,7 +989,7 @@
in = &req->in;
reqsize = in->h.len;
/* If request is too large, reply with an error and restart the read */
- if (iov_length(iov, nr_segs) < reqsize) {
+ if (nbytes < reqsize) {
req->out.h.error = -EIO;
/* SETXATTR is special, since it may contain too large data */
if (in->h.opcode == FUSE_SETXATTR)
@@ -796,12 +998,12 @@
goto restart;
}
spin_unlock(&fc->lock);
- fuse_copy_init(&cs, fc, 1, req, iov, nr_segs);
- err = fuse_copy_one(&cs, &in->h, sizeof(in->h));
+ cs->req = req;
+ err = fuse_copy_one(cs, &in->h, sizeof(in->h));
if (!err)
- err = fuse_copy_args(&cs, in->numargs, in->argpages,
+ err = fuse_copy_args(cs, in->numargs, in->argpages,
(struct fuse_arg *) in->args, 0);
- fuse_copy_finish(&cs);
+ fuse_copy_finish(cs);
spin_lock(&fc->lock);
req->locked = 0;
if (req->aborted) {
@@ -829,6 +1031,110 @@
return err;
}
+static ssize_t fuse_dev_read(struct kiocb *iocb, const struct iovec *iov,
+ unsigned long nr_segs, loff_t pos)
+{
+ struct fuse_copy_state cs;
+ struct file *file = iocb->ki_filp;
+ struct fuse_conn *fc = fuse_get_conn(file);
+ if (!fc)
+ return -EPERM;
+
+ fuse_copy_init(&cs, fc, 1, iov, nr_segs);
+
+ return fuse_dev_do_read(fc, file, &cs, iov_length(iov, nr_segs));
+}
+
+static int fuse_dev_pipe_buf_steal(struct pipe_inode_info *pipe,
+ struct pipe_buffer *buf)
+{
+ return 1;
+}
+
+static const struct pipe_buf_operations fuse_dev_pipe_buf_ops = {
+ .can_merge = 0,
+ .map = generic_pipe_buf_map,
+ .unmap = generic_pipe_buf_unmap,
+ .confirm = generic_pipe_buf_confirm,
+ .release = generic_pipe_buf_release,
+ .steal = fuse_dev_pipe_buf_steal,
+ .get = generic_pipe_buf_get,
+};
+
+static ssize_t fuse_dev_splice_read(struct file *in, loff_t *ppos,
+ struct pipe_inode_info *pipe,
+ size_t len, unsigned int flags)
+{
+ int ret;
+ int page_nr = 0;
+ int do_wakeup = 0;
+ struct pipe_buffer *bufs;
+ struct fuse_copy_state cs;
+ struct fuse_conn *fc = fuse_get_conn(in);
+ if (!fc)
+ return -EPERM;
+
+ bufs = kmalloc(pipe->buffers * sizeof (struct pipe_buffer), GFP_KERNEL);
+ if (!bufs)
+ return -ENOMEM;
+
+ fuse_copy_init(&cs, fc, 1, NULL, 0);
+ cs.pipebufs = bufs;
+ cs.pipe = pipe;
+ ret = fuse_dev_do_read(fc, in, &cs, len);
+ if (ret < 0)
+ goto out;
+
+ ret = 0;
+ pipe_lock(pipe);
+
+ if (!pipe->readers) {
+ send_sig(SIGPIPE, current, 0);
+ if (!ret)
+ ret = -EPIPE;
+ goto out_unlock;
+ }
+
+ if (pipe->nrbufs + cs.nr_segs > pipe->buffers) {
+ ret = -EIO;
+ goto out_unlock;
+ }
+
+ while (page_nr < cs.nr_segs) {
+ int newbuf = (pipe->curbuf + pipe->nrbufs) & (pipe->buffers - 1);
+ struct pipe_buffer *buf = pipe->bufs + newbuf;
+
+ buf->page = bufs[page_nr].page;
+ buf->offset = bufs[page_nr].offset;
+ buf->len = bufs[page_nr].len;
+ buf->ops = &fuse_dev_pipe_buf_ops;
+
+ pipe->nrbufs++;
+ page_nr++;
+ ret += buf->len;
+
+ if (pipe->inode)
+ do_wakeup = 1;
+ }
+
+out_unlock:
+ pipe_unlock(pipe);
+
+ if (do_wakeup) {
+ smp_mb();
+ if (waitqueue_active(&pipe->wait))
+ wake_up_interruptible(&pipe->wait);
+ kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
+ }
+
+out:
+ for (; page_nr < cs.nr_segs; page_nr++)
+ page_cache_release(bufs[page_nr].page);
+
+ kfree(bufs);
+ return ret;
+}
+
static int fuse_notify_poll(struct fuse_conn *fc, unsigned int size,
struct fuse_copy_state *cs)
{
@@ -988,23 +1294,17 @@
* it from the list and copy the rest of the buffer to the request.
* The request is finished by calling request_end()
*/
-static ssize_t fuse_dev_write(struct kiocb *iocb, const struct iovec *iov,
- unsigned long nr_segs, loff_t pos)
+static ssize_t fuse_dev_do_write(struct fuse_conn *fc,
+ struct fuse_copy_state *cs, size_t nbytes)
{
int err;
- size_t nbytes = iov_length(iov, nr_segs);
struct fuse_req *req;
struct fuse_out_header oh;
- struct fuse_copy_state cs;
- struct fuse_conn *fc = fuse_get_conn(iocb->ki_filp);
- if (!fc)
- return -EPERM;
- fuse_copy_init(&cs, fc, 0, NULL, iov, nr_segs);
if (nbytes < sizeof(struct fuse_out_header))
return -EINVAL;
- err = fuse_copy_one(&cs, &oh, sizeof(oh));
+ err = fuse_copy_one(cs, &oh, sizeof(oh));
if (err)
goto err_finish;
@@ -1017,7 +1317,7 @@
* and error contains notification code.
*/
if (!oh.unique) {
- err = fuse_notify(fc, oh.error, nbytes - sizeof(oh), &cs);
+ err = fuse_notify(fc, oh.error, nbytes - sizeof(oh), cs);
return err ? err : nbytes;
}
@@ -1036,7 +1336,7 @@
if (req->aborted) {
spin_unlock(&fc->lock);
- fuse_copy_finish(&cs);
+ fuse_copy_finish(cs);
spin_lock(&fc->lock);
request_end(fc, req);
return -ENOENT;
@@ -1053,7 +1353,7 @@
queue_interrupt(fc, req);
spin_unlock(&fc->lock);
- fuse_copy_finish(&cs);
+ fuse_copy_finish(cs);
return nbytes;
}
@@ -1061,11 +1361,13 @@
list_move(&req->list, &fc->io);
req->out.h = oh;
req->locked = 1;
- cs.req = req;
+ cs->req = req;
+ if (!req->out.page_replace)
+ cs->move_pages = 0;
spin_unlock(&fc->lock);
- err = copy_out_args(&cs, &req->out, nbytes);
- fuse_copy_finish(&cs);
+ err = copy_out_args(cs, &req->out, nbytes);
+ fuse_copy_finish(cs);
spin_lock(&fc->lock);
req->locked = 0;
@@ -1081,10 +1383,101 @@
err_unlock:
spin_unlock(&fc->lock);
err_finish:
- fuse_copy_finish(&cs);
+ fuse_copy_finish(cs);
return err;
}
+static ssize_t fuse_dev_write(struct kiocb *iocb, const struct iovec *iov,
+ unsigned long nr_segs, loff_t pos)
+{
+ struct fuse_copy_state cs;
+ struct fuse_conn *fc = fuse_get_conn(iocb->ki_filp);
+ if (!fc)
+ return -EPERM;
+
+ fuse_copy_init(&cs, fc, 0, iov, nr_segs);
+
+ return fuse_dev_do_write(fc, &cs, iov_length(iov, nr_segs));
+}
+
+static ssize_t fuse_dev_splice_write(struct pipe_inode_info *pipe,
+ struct file *out, loff_t *ppos,
+ size_t len, unsigned int flags)
+{
+ unsigned nbuf;
+ unsigned idx;
+ struct pipe_buffer *bufs;
+ struct fuse_copy_state cs;
+ struct fuse_conn *fc;
+ size_t rem;
+ ssize_t ret;
+
+ fc = fuse_get_conn(out);
+ if (!fc)
+ return -EPERM;
+
+ bufs = kmalloc(pipe->buffers * sizeof (struct pipe_buffer), GFP_KERNEL);
+ if (!bufs)
+ return -ENOMEM;
+
+ pipe_lock(pipe);
+ nbuf = 0;
+ rem = 0;
+ for (idx = 0; idx < pipe->nrbufs && rem < len; idx++)
+ rem += pipe->bufs[(pipe->curbuf + idx) & (pipe->buffers - 1)].len;
+
+ ret = -EINVAL;
+ if (rem < len) {
+ pipe_unlock(pipe);
+ goto out;
+ }
+
+ rem = len;
+ while (rem) {
+ struct pipe_buffer *ibuf;
+ struct pipe_buffer *obuf;
+
+ BUG_ON(nbuf >= pipe->buffers);
+ BUG_ON(!pipe->nrbufs);
+ ibuf = &pipe->bufs[pipe->curbuf];
+ obuf = &bufs[nbuf];
+
+ if (rem >= ibuf->len) {
+ *obuf = *ibuf;
+ ibuf->ops = NULL;
+ pipe->curbuf = (pipe->curbuf + 1) & (pipe->buffers - 1);
+ pipe->nrbufs--;
+ } else {
+ ibuf->ops->get(pipe, ibuf);
+ *obuf = *ibuf;
+ obuf->flags &= ~PIPE_BUF_FLAG_GIFT;
+ obuf->len = rem;
+ ibuf->offset += obuf->len;
+ ibuf->len -= obuf->len;
+ }
+ nbuf++;
+ rem -= obuf->len;
+ }
+ pipe_unlock(pipe);
+
+ fuse_copy_init(&cs, fc, 0, NULL, nbuf);
+ cs.pipebufs = bufs;
+ cs.pipe = pipe;
+
+ if (flags & SPLICE_F_MOVE)
+ cs.move_pages = 1;
+
+ ret = fuse_dev_do_write(fc, &cs, len);
+
+ for (idx = 0; idx < nbuf; idx++) {
+ struct pipe_buffer *buf = &bufs[idx];
+ buf->ops->release(pipe, buf);
+ }
+out:
+ kfree(bufs);
+ return ret;
+}
+
static unsigned fuse_dev_poll(struct file *file, poll_table *wait)
{
unsigned mask = POLLOUT | POLLWRNORM;
@@ -1226,8 +1619,10 @@
.llseek = no_llseek,
.read = do_sync_read,
.aio_read = fuse_dev_read,
+ .splice_read = fuse_dev_splice_read,
.write = do_sync_write,
.aio_write = fuse_dev_write,
+ .splice_write = fuse_dev_splice_write,
.poll = fuse_dev_poll,
.release = fuse_dev_release,
.fasync = fuse_dev_fasync,
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 4787ae6..3cdc5f7 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -1156,10 +1156,9 @@
return 0;
}
-static int fuse_dir_fsync(struct file *file, struct dentry *de, int datasync)
+static int fuse_dir_fsync(struct file *file, int datasync)
{
- /* nfsd can call this with no file */
- return file ? fuse_fsync_common(file, de, datasync, 1) : 0;
+ return fuse_fsync_common(file, datasync, 1);
}
static bool update_mtime(unsigned ivalid)
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index a9f5e13..ada0ade 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -351,10 +351,9 @@
fuse_release_nowrite(inode);
}
-int fuse_fsync_common(struct file *file, struct dentry *de, int datasync,
- int isdir)
+int fuse_fsync_common(struct file *file, int datasync, int isdir)
{
- struct inode *inode = de->d_inode;
+ struct inode *inode = file->f_mapping->host;
struct fuse_conn *fc = get_fuse_conn(inode);
struct fuse_file *ff = file->private_data;
struct fuse_req *req;
@@ -403,9 +402,9 @@
return err;
}
-static int fuse_fsync(struct file *file, struct dentry *de, int datasync)
+static int fuse_fsync(struct file *file, int datasync)
{
- return fuse_fsync_common(file, de, datasync, 0);
+ return fuse_fsync_common(file, datasync, 0);
}
void fuse_read_fill(struct fuse_req *req, struct file *file, loff_t pos,
@@ -517,18 +516,27 @@
int i;
size_t count = req->misc.read.in.size;
size_t num_read = req->out.args[0].size;
- struct inode *inode = req->pages[0]->mapping->host;
+ struct address_space *mapping = NULL;
- /*
- * Short read means EOF. If file size is larger, truncate it
- */
- if (!req->out.h.error && num_read < count) {
- loff_t pos = page_offset(req->pages[0]) + num_read;
- fuse_read_update_size(inode, pos, req->misc.read.attr_ver);
+ for (i = 0; mapping == NULL && i < req->num_pages; i++)
+ mapping = req->pages[i]->mapping;
+
+ if (mapping) {
+ struct inode *inode = mapping->host;
+
+ /*
+ * Short read means EOF. If file size is larger, truncate it
+ */
+ if (!req->out.h.error && num_read < count) {
+ loff_t pos;
+
+ pos = page_offset(req->pages[0]) + num_read;
+ fuse_read_update_size(inode, pos,
+ req->misc.read.attr_ver);
+ }
+ fuse_invalidate_attr(inode); /* atime changed */
}
- fuse_invalidate_attr(inode); /* atime changed */
-
for (i = 0; i < req->num_pages; i++) {
struct page *page = req->pages[i];
if (!req->out.h.error)
@@ -536,6 +544,7 @@
else
SetPageError(page);
unlock_page(page);
+ page_cache_release(page);
}
if (req->ff)
fuse_file_put(req->ff);
@@ -550,6 +559,7 @@
req->out.argpages = 1;
req->out.page_zeroing = 1;
+ req->out.page_replace = 1;
fuse_read_fill(req, file, pos, count, FUSE_READ);
req->misc.read.attr_ver = fuse_get_attr_version(fc);
if (fc->async_read) {
@@ -589,6 +599,7 @@
return PTR_ERR(req);
}
}
+ page_cache_get(page);
req->pages[req->num_pages] = page;
req->num_pages++;
return 0;
@@ -994,10 +1005,7 @@
nbytes = min_t(size_t, nbytes, FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT);
npages = (nbytes + offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
npages = clamp(npages, 1, FUSE_MAX_PAGES_PER_REQ);
- down_read(¤t->mm->mmap_sem);
- npages = get_user_pages(current, current->mm, user_addr, npages, !write,
- 0, req->pages, NULL);
- up_read(¤t->mm->mmap_sem);
+ npages = get_user_pages_fast(user_addr, npages, !write, req->pages);
if (npages < 0)
return npages;
@@ -1580,9 +1588,9 @@
while (iov_iter_count(&ii)) {
struct page *page = pages[page_idx++];
size_t todo = min_t(size_t, PAGE_SIZE, iov_iter_count(&ii));
- void *kaddr, *map;
+ void *kaddr;
- kaddr = map = kmap(page);
+ kaddr = kmap(page);
while (todo) {
char __user *uaddr = ii.iov->iov_base + ii.iov_offset;
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 01cc462..8f309f0 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -177,6 +177,9 @@
/** Zero partially or not copied pages */
unsigned page_zeroing:1;
+ /** Pages may be replaced with new ones */
+ unsigned page_replace:1;
+
/** Number or arguments */
unsigned numargs;
@@ -568,8 +571,7 @@
/**
* Send FSYNC or FSYNCDIR request
*/
-int fuse_fsync_common(struct file *file, struct dentry *de, int datasync,
- int isdir);
+int fuse_fsync_common(struct file *file, int datasync, int isdir);
/**
* Notify poll wakeup
diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c
index a739a0a..9f8b525 100644
--- a/fs/gfs2/aops.c
+++ b/fs/gfs2/aops.c
@@ -700,8 +700,14 @@
return 0;
page_cache_release(page);
+
+ /*
+ * XXX(hch): the call below should probably be replaced with
+ * a call to the gfs2-specific truncate blocks helper to actually
+ * release disk blocks..
+ */
if (pos + len > ip->i_inode.i_size)
- vmtruncate(&ip->i_inode, ip->i_inode.i_size);
+ simple_setsize(&ip->i_inode, ip->i_inode.i_size);
out_endtrans:
gfs2_trans_end(sdp);
out_trans_fail:
diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index 4a48c0f..84da64b 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -1041,6 +1041,7 @@
if (gfs2_is_stuffed(ip)) {
u64 dsize = size + sizeof(struct gfs2_inode);
+ ip->i_disksize = size;
ip->i_inode.i_mtime = ip->i_inode.i_ctime = CURRENT_TIME;
gfs2_trans_add_bh(ip->i_gl, dibh, 1);
gfs2_dinode_out(ip, dibh->b_data);
diff --git a/fs/gfs2/dir.c b/fs/gfs2/dir.c
index 8295c5b..26ca336 100644
--- a/fs/gfs2/dir.c
+++ b/fs/gfs2/dir.c
@@ -392,7 +392,7 @@
unsigned totlen = be16_to_cpu(dent->de_rec_len);
if (gfs2_dirent_sentinel(dent))
- actual = GFS2_DIRENT_SIZE(0);
+ actual = 0;
if (totlen - actual >= required)
return 1;
return 0;
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index b20bfcc..ed9a94f 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -554,9 +554,9 @@
* Returns: errno
*/
-static int gfs2_fsync(struct file *file, struct dentry *dentry, int datasync)
+static int gfs2_fsync(struct file *file, int datasync)
{
- struct inode *inode = dentry->d_inode;
+ struct inode *inode = file->f_mapping->host;
int sync_state = inode->i_state & (I_DIRTY_SYNC|I_DIRTY_DATASYNC);
int ret = 0;
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index ddcdbf4..0898f3e 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -706,8 +706,18 @@
{
unsigned long delay = 0;
struct gfs2_glock *gl = container_of(work, struct gfs2_glock, gl_work.work);
+ struct gfs2_holder *gh;
int drop_ref = 0;
+ if (unlikely(test_bit(GLF_FROZEN, &gl->gl_flags))) {
+ spin_lock(&gl->gl_spin);
+ gh = find_first_waiter(gl);
+ if (gh && (gh->gh_flags & LM_FLAG_NOEXP) &&
+ test_and_clear_bit(GLF_FROZEN, &gl->gl_flags))
+ set_bit(GLF_REPLY_PENDING, &gl->gl_flags);
+ spin_unlock(&gl->gl_spin);
+ }
+
if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags)) {
finish_xmote(gl, gl->gl_reply);
drop_ref = 1;
@@ -1348,7 +1358,7 @@
}
-static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask)
+static int gfs2_shrink_glock_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
{
struct gfs2_glock *gl;
int may_demote;
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index b5612cb..f03afd9 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -169,7 +169,7 @@
{
struct inode *inode;
struct gfs2_inode *ip;
- struct gfs2_glock *io_gl;
+ struct gfs2_glock *io_gl = NULL;
int error;
inode = gfs2_iget(sb, no_addr);
@@ -198,6 +198,7 @@
ip->i_iopen_gh.gh_gl->gl_object = ip;
gfs2_glock_put(io_gl);
+ io_gl = NULL;
if ((type == DT_UNKNOWN) && (no_formal_ino == 0))
goto gfs2_nfsbypass;
@@ -228,7 +229,8 @@
fail_glock:
gfs2_glock_dq(&ip->i_iopen_gh);
fail_iopen:
- gfs2_glock_put(io_gl);
+ if (io_gl)
+ gfs2_glock_put(io_gl);
fail_put:
if (inode->i_state & I_NEW)
ip->i_gl->gl_object = NULL;
@@ -256,7 +258,7 @@
{
struct gfs2_sbd *sdp;
struct gfs2_inode *ip;
- struct gfs2_glock *io_gl;
+ struct gfs2_glock *io_gl = NULL;
int error;
struct gfs2_holder gh;
struct inode *inode;
@@ -293,6 +295,7 @@
ip->i_iopen_gh.gh_gl->gl_object = ip;
gfs2_glock_put(io_gl);
+ io_gl = NULL;
inode->i_mode = DT2IF(DT_UNKNOWN);
@@ -319,7 +322,8 @@
fail_glock:
gfs2_glock_dq(&ip->i_iopen_gh);
fail_iopen:
- gfs2_glock_put(io_gl);
+ if (io_gl)
+ gfs2_glock_put(io_gl);
fail_put:
ip->i_gl->gl_object = NULL;
gfs2_glock_put(ip->i_gl);
diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c
index 4e64352..98cdd05 100644
--- a/fs/gfs2/ops_inode.c
+++ b/fs/gfs2/ops_inode.c
@@ -1071,6 +1071,9 @@
return error;
}
+/*
+ * XXX: should be changed to have proper ordering by opencoding simple_setsize
+ */
static int setattr_size(struct inode *inode, struct iattr *attr)
{
struct gfs2_inode *ip = GFS2_I(inode);
@@ -1081,7 +1084,7 @@
error = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);
if (error)
return error;
- error = vmtruncate(inode, attr->ia_size);
+ error = simple_setsize(inode, attr->ia_size);
gfs2_trans_end(sdp);
if (error)
return error;
diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index 49667d6..8f02d3d 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -77,7 +77,7 @@
static atomic_t qd_lru_count = ATOMIC_INIT(0);
static DEFINE_SPINLOCK(qd_lru_lock);
-int gfs2_shrink_qd_memory(int nr, gfp_t gfp_mask)
+int gfs2_shrink_qd_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
{
struct gfs2_quota_data *qd;
struct gfs2_sbd *sdp;
@@ -694,10 +694,8 @@
if (!buffer_mapped(bh))
goto unlock_out;
/* If it's a newly allocated disk block for quota, zero it */
- if (buffer_new(bh)) {
- memset(bh->b_data, 0, bh->b_size);
- set_buffer_uptodate(bh);
- }
+ if (buffer_new(bh))
+ zero_user(page, pos - blocksize, bh->b_size);
}
if (PageUptodate(page))
@@ -723,7 +721,7 @@
/* If quota straddles page boundary, we need to update the rest of the
* quota at the beginning of the next page */
- if (offset != 0) { /* first page, offset is closer to PAGE_CACHE_SIZE */
+ if ((offset + sizeof(struct gfs2_quota)) > PAGE_CACHE_SIZE) {
ptr = ptr + nbytes;
nbytes = sizeof(struct gfs2_quota) - nbytes;
offset = 0;
diff --git a/fs/gfs2/quota.h b/fs/gfs2/quota.h
index 195f60c..e7d236c 100644
--- a/fs/gfs2/quota.h
+++ b/fs/gfs2/quota.h
@@ -51,7 +51,7 @@
return ret;
}
-extern int gfs2_shrink_qd_memory(int nr, gfp_t gfp_mask);
+extern int gfs2_shrink_qd_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask);
extern const struct quotactl_ops gfs2_quotactl_ops;
#endif /* __QUOTA_DOT_H__ */
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 3a029d8..87ac189 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -411,9 +411,9 @@
return 0;
}
-int hostfs_fsync(struct file *file, struct dentry *dentry, int datasync)
+int hostfs_fsync(struct file *file, int datasync)
{
- return fsync_file(HOSTFS_I(dentry->d_inode)->fd, datasync);
+ return fsync_file(HOSTFS_I(file->f_mapping->host)->fd, datasync);
}
static const struct file_operations hostfs_file_fops = {
diff --git a/fs/hpfs/file.c b/fs/hpfs/file.c
index 3efabff..a9ae9bf 100644
--- a/fs/hpfs/file.c
+++ b/fs/hpfs/file.c
@@ -19,9 +19,9 @@
return 0;
}
-int hpfs_file_fsync(struct file *file, struct dentry *dentry, int datasync)
+int hpfs_file_fsync(struct file *file, int datasync)
{
- /*return file_fsync(file, dentry);*/
+ /*return file_fsync(file, datasync);*/
return 0; /* Don't fsync :-) */
}
diff --git a/fs/hpfs/hpfs_fn.h b/fs/hpfs/hpfs_fn.h
index 97bf738..75f9d43 100644
--- a/fs/hpfs/hpfs_fn.h
+++ b/fs/hpfs/hpfs_fn.h
@@ -268,7 +268,7 @@
/* file.c */
-int hpfs_file_fsync(struct file *, struct dentry *, int);
+int hpfs_file_fsync(struct file *, int);
extern const struct file_operations hpfs_file_ops;
extern const struct inode_operations hpfs_file_iops;
extern const struct address_space_operations hpfs_aops;
diff --git a/fs/hppfs/hppfs.c b/fs/hppfs/hppfs.c
index 2e4dfa8..826c3f9 100644
--- a/fs/hppfs/hppfs.c
+++ b/fs/hppfs/hppfs.c
@@ -587,7 +587,7 @@
return err;
}
-static int hppfs_fsync(struct file *file, struct dentry *dentry, int datasync)
+static int hppfs_fsync(struct file *file, int datasync)
{
return 0;
}
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index a0bbd3d..a4e9a7e 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -688,7 +688,7 @@
const struct file_operations hugetlbfs_file_operations = {
.read = hugetlbfs_read,
.mmap = hugetlbfs_file_mmap,
- .fsync = simple_sync_file,
+ .fsync = noop_fsync,
.get_unmapped_area = hugetlb_get_unmapped_area,
};
diff --git a/fs/inode.c b/fs/inode.c
index 2bee20a..722860b 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -512,7 +512,7 @@
* This function is passed the number of inodes to scan, and it returns the
* total number of remaining possibly-reclaimable inodes.
*/
-static int shrink_icache_memory(int nr, gfp_t gfp_mask)
+static int shrink_icache_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
{
if (nr) {
/*
diff --git a/fs/isofs/dir.c b/fs/isofs/dir.c
index b9ab69b..e0aca9a 100644
--- a/fs/isofs/dir.c
+++ b/fs/isofs/dir.c
@@ -272,6 +272,7 @@
const struct file_operations isofs_dir_operations =
{
+ .llseek = generic_file_llseek,
.read = generic_read_dir,
.readdir = isofs_readdir,
};
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index bc2ff59..0368808 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -297,7 +297,6 @@
struct page *new_page;
unsigned int new_offset;
struct buffer_head *bh_in = jh2bh(jh_in);
- struct jbd2_buffer_trigger_type *triggers;
journal_t *journal = transaction->t_journal;
/*
@@ -328,21 +327,21 @@
done_copy_out = 1;
new_page = virt_to_page(jh_in->b_frozen_data);
new_offset = offset_in_page(jh_in->b_frozen_data);
- triggers = jh_in->b_frozen_triggers;
} else {
new_page = jh2bh(jh_in)->b_page;
new_offset = offset_in_page(jh2bh(jh_in)->b_data);
- triggers = jh_in->b_triggers;
}
mapped_data = kmap_atomic(new_page, KM_USER0);
/*
- * Fire any commit trigger. Do this before checking for escaping,
- * as the trigger may modify the magic offset. If a copy-out
- * happens afterwards, it will have the correct data in the buffer.
+ * Fire data frozen trigger if data already wasn't frozen. Do this
+ * before checking for escaping, as the trigger may modify the magic
+ * offset. If a copy-out happens afterwards, it will have the correct
+ * data in the buffer.
*/
- jbd2_buffer_commit_trigger(jh_in, mapped_data + new_offset,
- triggers);
+ if (!done_copy_out)
+ jbd2_buffer_frozen_trigger(jh_in, mapped_data + new_offset,
+ jh_in->b_triggers);
/*
* Check for escaping
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index bfc70f5..b8e0806 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -725,6 +725,9 @@
page = jh2bh(jh)->b_page;
offset = ((unsigned long) jh2bh(jh)->b_data) & ~PAGE_MASK;
source = kmap_atomic(page, KM_USER0);
+ /* Fire data frozen trigger just before we copy the data */
+ jbd2_buffer_frozen_trigger(jh, source + offset,
+ jh->b_triggers);
memcpy(jh->b_frozen_data, source+offset, jh2bh(jh)->b_size);
kunmap_atomic(source, KM_USER0);
@@ -963,15 +966,15 @@
jh->b_triggers = type;
}
-void jbd2_buffer_commit_trigger(struct journal_head *jh, void *mapped_data,
+void jbd2_buffer_frozen_trigger(struct journal_head *jh, void *mapped_data,
struct jbd2_buffer_trigger_type *triggers)
{
struct buffer_head *bh = jh2bh(jh);
- if (!triggers || !triggers->t_commit)
+ if (!triggers || !triggers->t_frozen)
return;
- triggers->t_commit(triggers, bh, mapped_data, bh->b_size);
+ triggers->t_frozen(triggers, bh, mapped_data, bh->b_size);
}
void jbd2_buffer_abort_trigger(struct journal_head *jh,
@@ -1311,7 +1314,6 @@
if (handle->h_sync)
transaction->t_synchronous_commit = 1;
current->journal_info = NULL;
- spin_lock(&journal->j_state_lock);
spin_lock(&transaction->t_handle_lock);
transaction->t_outstanding_credits -= handle->h_buffer_credits;
transaction->t_updates--;
@@ -1340,8 +1342,7 @@
jbd_debug(2, "transaction too old, requesting commit for "
"handle %p\n", handle);
/* This is non-blocking */
- __jbd2_log_start_commit(journal, transaction->t_tid);
- spin_unlock(&journal->j_state_lock);
+ jbd2_log_start_commit(journal, transaction->t_tid);
/*
* Special case: JBD2_SYNC synchronous updates require us
@@ -1351,7 +1352,6 @@
err = jbd2_log_wait_commit(journal, tid);
} else {
spin_unlock(&transaction->t_handle_lock);
- spin_unlock(&journal->j_state_lock);
}
lock_map_release(&handle->h_lockdep_map);
diff --git a/fs/jffs2/acl.c b/fs/jffs2/acl.c
index a33aab6..54a92fd 100644
--- a/fs/jffs2/acl.c
+++ b/fs/jffs2/acl.c
@@ -234,8 +234,9 @@
if (inode->i_mode != mode) {
struct iattr attr;
- attr.ia_valid = ATTR_MODE;
+ attr.ia_valid = ATTR_MODE | ATTR_CTIME;
attr.ia_mode = mode;
+ attr.ia_ctime = CURRENT_TIME_SEC;
rc = jffs2_do_setattr(inode, &attr);
if (rc < 0)
return rc;
diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index 7aa4417..166062a 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -222,15 +222,18 @@
dir_i->i_mtime = dir_i->i_ctime = ITIME(je32_to_cpu(ri->ctime));
jffs2_free_raw_inode(ri);
- d_instantiate(dentry, inode);
D1(printk(KERN_DEBUG "jffs2_create: Created ino #%lu with mode %o, nlink %d(%d). nrpages %ld\n",
inode->i_ino, inode->i_mode, inode->i_nlink,
f->inocache->pino_nlink, inode->i_mapping->nrpages));
+
+ d_instantiate(dentry, inode);
+ unlock_new_inode(inode);
return 0;
fail:
make_bad_inode(inode);
+ unlock_new_inode(inode);
iput(inode);
jffs2_free_raw_inode(ri);
return ret;
@@ -360,8 +363,8 @@
/* Eeek. Wave bye bye */
mutex_unlock(&f->sem);
jffs2_complete_reservation(c);
- jffs2_clear_inode(inode);
- return PTR_ERR(fn);
+ ret = PTR_ERR(fn);
+ goto fail;
}
/* We use f->target field to store the target path. */
@@ -370,8 +373,8 @@
printk(KERN_WARNING "Can't allocate %d bytes of memory\n", targetlen + 1);
mutex_unlock(&f->sem);
jffs2_complete_reservation(c);
- jffs2_clear_inode(inode);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto fail;
}
memcpy(f->target, target, targetlen + 1);
@@ -386,30 +389,24 @@
jffs2_complete_reservation(c);
ret = jffs2_init_security(inode, dir_i);
- if (ret) {
- jffs2_clear_inode(inode);
- return ret;
- }
+ if (ret)
+ goto fail;
+
ret = jffs2_init_acl_post(inode);
- if (ret) {
- jffs2_clear_inode(inode);
- return ret;
- }
+ if (ret)
+ goto fail;
ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &alloclen,
ALLOC_NORMAL, JFFS2_SUMMARY_DIRENT_SIZE(namelen));
- if (ret) {
- /* Eep. */
- jffs2_clear_inode(inode);
- return ret;
- }
+ if (ret)
+ goto fail;
rd = jffs2_alloc_raw_dirent();
if (!rd) {
/* Argh. Now we treat it like a normal delete */
jffs2_complete_reservation(c);
- jffs2_clear_inode(inode);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto fail;
}
dir_f = JFFS2_INODE_INFO(dir_i);
@@ -437,8 +434,8 @@
jffs2_complete_reservation(c);
jffs2_free_raw_dirent(rd);
mutex_unlock(&dir_f->sem);
- jffs2_clear_inode(inode);
- return PTR_ERR(fd);
+ ret = PTR_ERR(fd);
+ goto fail;
}
dir_i->i_mtime = dir_i->i_ctime = ITIME(je32_to_cpu(rd->mctime));
@@ -453,7 +450,14 @@
jffs2_complete_reservation(c);
d_instantiate(dentry, inode);
+ unlock_new_inode(inode);
return 0;
+
+ fail:
+ make_bad_inode(inode);
+ unlock_new_inode(inode);
+ iput(inode);
+ return ret;
}
@@ -519,8 +523,8 @@
/* Eeek. Wave bye bye */
mutex_unlock(&f->sem);
jffs2_complete_reservation(c);
- jffs2_clear_inode(inode);
- return PTR_ERR(fn);
+ ret = PTR_ERR(fn);
+ goto fail;
}
/* No data here. Only a metadata node, which will be
obsoleted by the first data write
@@ -531,30 +535,24 @@
jffs2_complete_reservation(c);
ret = jffs2_init_security(inode, dir_i);
- if (ret) {
- jffs2_clear_inode(inode);
- return ret;
- }
+ if (ret)
+ goto fail;
+
ret = jffs2_init_acl_post(inode);
- if (ret) {
- jffs2_clear_inode(inode);
- return ret;
- }
+ if (ret)
+ goto fail;
ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &alloclen,
ALLOC_NORMAL, JFFS2_SUMMARY_DIRENT_SIZE(namelen));
- if (ret) {
- /* Eep. */
- jffs2_clear_inode(inode);
- return ret;
- }
+ if (ret)
+ goto fail;
rd = jffs2_alloc_raw_dirent();
if (!rd) {
/* Argh. Now we treat it like a normal delete */
jffs2_complete_reservation(c);
- jffs2_clear_inode(inode);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto fail;
}
dir_f = JFFS2_INODE_INFO(dir_i);
@@ -582,8 +580,8 @@
jffs2_complete_reservation(c);
jffs2_free_raw_dirent(rd);
mutex_unlock(&dir_f->sem);
- jffs2_clear_inode(inode);
- return PTR_ERR(fd);
+ ret = PTR_ERR(fd);
+ goto fail;
}
dir_i->i_mtime = dir_i->i_ctime = ITIME(je32_to_cpu(rd->mctime));
@@ -599,7 +597,14 @@
jffs2_complete_reservation(c);
d_instantiate(dentry, inode);
+ unlock_new_inode(inode);
return 0;
+
+ fail:
+ make_bad_inode(inode);
+ unlock_new_inode(inode);
+ iput(inode);
+ return ret;
}
static int jffs2_rmdir (struct inode *dir_i, struct dentry *dentry)
@@ -693,8 +698,8 @@
/* Eeek. Wave bye bye */
mutex_unlock(&f->sem);
jffs2_complete_reservation(c);
- jffs2_clear_inode(inode);
- return PTR_ERR(fn);
+ ret = PTR_ERR(fn);
+ goto fail;
}
/* No data here. Only a metadata node, which will be
obsoleted by the first data write
@@ -705,30 +710,24 @@
jffs2_complete_reservation(c);
ret = jffs2_init_security(inode, dir_i);
- if (ret) {
- jffs2_clear_inode(inode);
- return ret;
- }
+ if (ret)
+ goto fail;
+
ret = jffs2_init_acl_post(inode);
- if (ret) {
- jffs2_clear_inode(inode);
- return ret;
- }
+ if (ret)
+ goto fail;
ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &alloclen,
ALLOC_NORMAL, JFFS2_SUMMARY_DIRENT_SIZE(namelen));
- if (ret) {
- /* Eep. */
- jffs2_clear_inode(inode);
- return ret;
- }
+ if (ret)
+ goto fail;
rd = jffs2_alloc_raw_dirent();
if (!rd) {
/* Argh. Now we treat it like a normal delete */
jffs2_complete_reservation(c);
- jffs2_clear_inode(inode);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto fail;
}
dir_f = JFFS2_INODE_INFO(dir_i);
@@ -759,8 +758,8 @@
jffs2_complete_reservation(c);
jffs2_free_raw_dirent(rd);
mutex_unlock(&dir_f->sem);
- jffs2_clear_inode(inode);
- return PTR_ERR(fd);
+ ret = PTR_ERR(fd);
+ goto fail;
}
dir_i->i_mtime = dir_i->i_ctime = ITIME(je32_to_cpu(rd->mctime));
@@ -775,8 +774,14 @@
jffs2_complete_reservation(c);
d_instantiate(dentry, inode);
-
+ unlock_new_inode(inode);
return 0;
+
+ fail:
+ make_bad_inode(inode);
+ unlock_new_inode(inode);
+ iput(inode);
+ return ret;
}
static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c
index e7291c1..8134970 100644
--- a/fs/jffs2/file.c
+++ b/fs/jffs2/file.c
@@ -26,9 +26,9 @@
struct page **pagep, void **fsdata);
static int jffs2_readpage (struct file *filp, struct page *pg);
-int jffs2_fsync(struct file *filp, struct dentry *dentry, int datasync)
+int jffs2_fsync(struct file *filp, int datasync)
{
- struct inode *inode = dentry->d_inode;
+ struct inode *inode = filp->f_mapping->host;
struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
/* Trigger GC to flush any pending writes for this inode */
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 86e0821..459d39d 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -169,13 +169,13 @@
mutex_unlock(&f->sem);
jffs2_complete_reservation(c);
- /* We have to do the vmtruncate() without f->sem held, since
+ /* We have to do the simple_setsize() without f->sem held, since
some pages may be locked and waiting for it in readpage().
We are protected from a simultaneous write() extending i_size
back past iattr->ia_size, because do_truncate() holds the
generic inode semaphore. */
if (ivalid & ATTR_SIZE && inode->i_size > iattr->ia_size) {
- vmtruncate(inode, iattr->ia_size);
+ simple_setsize(inode, iattr->ia_size);
inode->i_blocks = (inode->i_size + 511) >> 9;
}
@@ -465,7 +465,12 @@
inode->i_blocks = 0;
inode->i_size = 0;
- insert_inode_hash(inode);
+ if (insert_inode_locked(inode) < 0) {
+ make_bad_inode(inode);
+ unlock_new_inode(inode);
+ iput(inode);
+ return ERR_PTR(-EINVAL);
+ }
return inode;
}
diff --git a/fs/jffs2/os-linux.h b/fs/jffs2/os-linux.h
index 035a767..4791aac 100644
--- a/fs/jffs2/os-linux.h
+++ b/fs/jffs2/os-linux.h
@@ -158,7 +158,7 @@
extern const struct file_operations jffs2_file_operations;
extern const struct inode_operations jffs2_file_inode_operations;
extern const struct address_space_operations jffs2_file_address_operations;
-int jffs2_fsync(struct file *, struct dentry *, int);
+int jffs2_fsync(struct file *, int);
int jffs2_do_readpage_unlock (struct inode *inode, struct page *pg);
/* ioctl.c */
diff --git a/fs/jffs2/xattr.c b/fs/jffs2/xattr.c
index a2d58c9..d258e26 100644
--- a/fs/jffs2/xattr.c
+++ b/fs/jffs2/xattr.c
@@ -626,7 +626,7 @@
static int check_xattr_ref_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic)
{
- /* success of check_xattr_ref_inode() means taht inode (ic) dose not have
+ /* success of check_xattr_ref_inode() means that inode (ic) dose not have
* duplicate name/value pairs. If duplicate name/value pair would be found,
* one will be removed.
*/
diff --git a/fs/jfs/file.c b/fs/jfs/file.c
index 85d9ec6..127263c 100644
--- a/fs/jfs/file.c
+++ b/fs/jfs/file.c
@@ -27,9 +27,9 @@
#include "jfs_acl.h"
#include "jfs_debug.h"
-int jfs_fsync(struct file *file, struct dentry *dentry, int datasync)
+int jfs_fsync(struct file *file, int datasync)
{
- struct inode *inode = dentry->d_inode;
+ struct inode *inode = file->f_mapping->host;
int rc = 0;
if (!(inode->i_state & I_DIRTY) ||
diff --git a/fs/jfs/jfs_inode.h b/fs/jfs/jfs_inode.h
index 9e6bda3..11042b1 100644
--- a/fs/jfs/jfs_inode.h
+++ b/fs/jfs/jfs_inode.h
@@ -21,7 +21,7 @@
struct fid;
extern struct inode *ialloc(struct inode *, umode_t);
-extern int jfs_fsync(struct file *, struct dentry *, int);
+extern int jfs_fsync(struct file *, int);
extern long jfs_ioctl(struct file *, unsigned int, unsigned long);
extern long jfs_compat_ioctl(struct file *, unsigned int, unsigned long);
extern struct inode *jfs_iget(struct super_block *, unsigned long);
diff --git a/fs/jfs/super.c b/fs/jfs/super.c
index b66832a..b38f96b 100644
--- a/fs/jfs/super.c
+++ b/fs/jfs/super.c
@@ -179,6 +179,8 @@
jfs_info("In jfs_put_super");
+ dquot_disable(sb, -1, DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED);
+
lock_kernel();
rc = jfs_umount(sb);
@@ -396,10 +398,20 @@
JFS_SBI(sb)->flag = flag;
ret = jfs_mount_rw(sb, 1);
+
+ /* mark the fs r/w for quota activity */
+ sb->s_flags &= ~MS_RDONLY;
+
unlock_kernel();
+ dquot_resume(sb, -1);
return ret;
}
if ((!(sb->s_flags & MS_RDONLY)) && (*flags & MS_RDONLY)) {
+ rc = dquot_suspend(sb, -1);
+ if (rc < 0) {
+ unlock_kernel();
+ return rc;
+ }
rc = jfs_umount_rw(sb);
JFS_SBI(sb)->flag = flag;
unlock_kernel();
@@ -469,6 +481,10 @@
*/
sb->s_op = &jfs_super_operations;
sb->s_export_op = &jfs_export_operations;
+#ifdef CONFIG_QUOTA
+ sb->dq_op = &dquot_operations;
+ sb->s_qcop = &dquot_quotactl_ops;
+#endif
/*
* Initialize direct-mapping inode/address-space
diff --git a/fs/libfs.c b/fs/libfs.c
index 232bea4..dcaf972 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -8,6 +8,7 @@
#include <linux/slab.h>
#include <linux/mount.h>
#include <linux/vfs.h>
+#include <linux/quotaops.h>
#include <linux/mutex.h>
#include <linux/exportfs.h>
#include <linux/writeback.h>
@@ -58,11 +59,6 @@
return NULL;
}
-int simple_sync_file(struct file * file, struct dentry *dentry, int datasync)
-{
- return 0;
-}
-
int dcache_dir_open(struct inode *inode, struct file *file)
{
static struct qstr cursor_name = {.len = 1, .name = "."};
@@ -190,7 +186,7 @@
.llseek = dcache_dir_lseek,
.read = generic_read_dir,
.readdir = dcache_readdir,
- .fsync = simple_sync_file,
+ .fsync = noop_fsync,
};
const struct inode_operations simple_dir_inode_operations = {
@@ -330,6 +326,81 @@
return 0;
}
+/**
+ * simple_setsize - handle core mm and vfs requirements for file size change
+ * @inode: inode
+ * @newsize: new file size
+ *
+ * Returns 0 on success, -error on failure.
+ *
+ * simple_setsize must be called with inode_mutex held.
+ *
+ * simple_setsize will check that the requested new size is OK (see
+ * inode_newsize_ok), and then will perform the necessary i_size update
+ * and pagecache truncation (if necessary). It will be typically be called
+ * from the filesystem's setattr function when ATTR_SIZE is passed in.
+ *
+ * The inode itself must have correct permissions and attributes to allow
+ * i_size to be changed, this function then just checks that the new size
+ * requested is valid.
+ *
+ * In the case of simple in-memory filesystems with inodes stored solely
+ * in the inode cache, and file data in the pagecache, nothing more needs
+ * to be done to satisfy a truncate request. Filesystems with on-disk
+ * blocks for example will need to free them in the case of truncate, in
+ * that case it may be easier not to use simple_setsize (but each of its
+ * components will likely be required at some point to update pagecache
+ * and inode etc).
+ */
+int simple_setsize(struct inode *inode, loff_t newsize)
+{
+ loff_t oldsize;
+ int error;
+
+ error = inode_newsize_ok(inode, newsize);
+ if (error)
+ return error;
+
+ oldsize = inode->i_size;
+ i_size_write(inode, newsize);
+ truncate_pagecache(inode, oldsize, newsize);
+
+ return error;
+}
+EXPORT_SYMBOL(simple_setsize);
+
+/**
+ * simple_setattr - setattr for simple in-memory filesystem
+ * @dentry: dentry
+ * @iattr: iattr structure
+ *
+ * Returns 0 on success, -error on failure.
+ *
+ * simple_setattr implements setattr for an in-memory filesystem which
+ * does not store its own file data or metadata (eg. uses the page cache
+ * and inode cache as its data store).
+ */
+int simple_setattr(struct dentry *dentry, struct iattr *iattr)
+{
+ struct inode *inode = dentry->d_inode;
+ int error;
+
+ error = inode_change_ok(inode, iattr);
+ if (error)
+ return error;
+
+ if (iattr->ia_valid & ATTR_SIZE) {
+ error = simple_setsize(inode, iattr->ia_size);
+ if (error)
+ return error;
+ }
+
+ generic_setattr(inode, iattr);
+
+ return error;
+}
+EXPORT_SYMBOL(simple_setattr);
+
int simple_readpage(struct file *file, struct page *page)
{
clear_highpage(page);
@@ -418,7 +489,8 @@
* unique inode values later for this filesystem, then you must take care
* to pass it an appropriate max_reserved value to avoid collisions.
*/
-int simple_fill_super(struct super_block *s, int magic, struct tree_descr *files)
+int simple_fill_super(struct super_block *s, unsigned long magic,
+ struct tree_descr *files)
{
struct inode *inode;
struct dentry *root;
@@ -851,13 +923,22 @@
}
EXPORT_SYMBOL_GPL(generic_fh_to_parent);
-int simple_fsync(struct file *file, struct dentry *dentry, int datasync)
+/**
+ * generic_file_fsync - generic fsync implementation for simple filesystems
+ * @file: file to synchronize
+ * @datasync: only synchronize essential metadata if true
+ *
+ * This is a generic implementation of the fsync method for simple
+ * filesystems which track all non-inode metadata in the buffers list
+ * hanging off the address_space structure.
+ */
+int generic_file_fsync(struct file *file, int datasync)
{
struct writeback_control wbc = {
.sync_mode = WB_SYNC_ALL,
.nr_to_write = 0, /* metadata-only; caller takes care of data */
};
- struct inode *inode = dentry->d_inode;
+ struct inode *inode = file->f_mapping->host;
int err;
int ret;
@@ -872,7 +953,15 @@
ret = err;
return ret;
}
-EXPORT_SYMBOL(simple_fsync);
+EXPORT_SYMBOL(generic_file_fsync);
+
+/*
+ * No-op implementation of ->fsync for in-memory filesystems.
+ */
+int noop_fsync(struct file *file, int datasync)
+{
+ return 0;
+}
EXPORT_SYMBOL(dcache_dir_close);
EXPORT_SYMBOL(dcache_dir_lseek);
@@ -895,7 +984,7 @@
EXPORT_SYMBOL(simple_rename);
EXPORT_SYMBOL(simple_rmdir);
EXPORT_SYMBOL(simple_statfs);
-EXPORT_SYMBOL(simple_sync_file);
+EXPORT_SYMBOL(noop_fsync);
EXPORT_SYMBOL(simple_unlink);
EXPORT_SYMBOL(simple_read_from_buffer);
EXPORT_SYMBOL(simple_write_to_buffer);
diff --git a/fs/logfs/file.c b/fs/logfs/file.c
index 0de5240..abe1caf 100644
--- a/fs/logfs/file.c
+++ b/fs/logfs/file.c
@@ -219,9 +219,9 @@
}
}
-int logfs_fsync(struct file *file, struct dentry *dentry, int datasync)
+int logfs_fsync(struct file *file, int datasync)
{
- struct super_block *sb = dentry->d_inode->i_sb;
+ struct super_block *sb = file->f_mapping->host->i_sb;
logfs_write_anchor(sb);
return 0;
diff --git a/fs/logfs/logfs.h b/fs/logfs/logfs.h
index 1a9db84..c838c4d 100644
--- a/fs/logfs/logfs.h
+++ b/fs/logfs/logfs.h
@@ -506,7 +506,7 @@
int logfs_readpage(struct file *file, struct page *page);
int logfs_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
unsigned long arg);
-int logfs_fsync(struct file *file, struct dentry *dentry, int datasync);
+int logfs_fsync(struct file *file, int datasync);
/* gc.c */
u32 get_best_cand(struct super_block *sb, struct candidate_list *list, u32 *ec);
diff --git a/fs/mbcache.c b/fs/mbcache.c
index ec88ff3..e28f21b 100644
--- a/fs/mbcache.c
+++ b/fs/mbcache.c
@@ -115,7 +115,7 @@
* What the mbcache registers as to get shrunk dynamically.
*/
-static int mb_cache_shrink_fn(int nr_to_scan, gfp_t gfp_mask);
+static int mb_cache_shrink_fn(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask);
static struct shrinker mb_cache_shrinker = {
.shrink = mb_cache_shrink_fn,
@@ -191,13 +191,14 @@
* This function is called by the kernel memory management when memory
* gets low.
*
+ * @shrink: (ignored)
* @nr_to_scan: Number of objects to scan
* @gfp_mask: (ignored)
*
* Returns the number of objects which are present in the cache.
*/
static int
-mb_cache_shrink_fn(int nr_to_scan, gfp_t gfp_mask)
+mb_cache_shrink_fn(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
{
LIST_HEAD(free_list);
struct list_head *l, *ltmp;
diff --git a/fs/minix/dir.c b/fs/minix/dir.c
index 6198731..1dbf921 100644
--- a/fs/minix/dir.c
+++ b/fs/minix/dir.c
@@ -22,7 +22,7 @@
.llseek = generic_file_llseek,
.read = generic_read_dir,
.readdir = minix_readdir,
- .fsync = simple_fsync,
+ .fsync = generic_file_fsync,
};
static inline void dir_put_page(struct page *page)
@@ -72,16 +72,9 @@
{
struct address_space *mapping = dir->i_mapping;
struct page *page = read_mapping_page(mapping, n, NULL);
- if (!IS_ERR(page)) {
+ if (!IS_ERR(page))
kmap(page);
- if (!PageUptodate(page))
- goto fail;
- }
return page;
-
-fail:
- dir_put_page(page);
- return ERR_PTR(-EIO);
}
static inline void *minix_next_entry(void *de, struct minix_sb_info *sbi)
diff --git a/fs/minix/file.c b/fs/minix/file.c
index 3eec3e6..d5320ff 100644
--- a/fs/minix/file.c
+++ b/fs/minix/file.c
@@ -19,7 +19,7 @@
.write = do_sync_write,
.aio_write = generic_file_aio_write,
.mmap = generic_file_mmap,
- .fsync = simple_fsync,
+ .fsync = generic_file_fsync,
.splice_read = generic_file_splice_read,
};
diff --git a/fs/minix/itree_v2.c b/fs/minix/itree_v2.c
index f230109..13487ad 100644
--- a/fs/minix/itree_v2.c
+++ b/fs/minix/itree_v2.c
@@ -20,6 +20,9 @@
return (block_t *)minix_i(inode)->u.i2_data;
}
+#define DIRCOUNT 7
+#define INDIRCOUNT(sb) (1 << ((sb)->s_blocksize_bits - 2))
+
static int block_to_path(struct inode * inode, long block, int offsets[DEPTH])
{
int n = 0;
@@ -34,21 +37,21 @@
printk("MINIX-fs: block_to_path: "
"block %ld too big on dev %s\n",
block, bdevname(sb->s_bdev, b));
- } else if (block < 7) {
+ } else if (block < DIRCOUNT) {
offsets[n++] = block;
- } else if ((block -= 7) < 256) {
- offsets[n++] = 7;
+ } else if ((block -= DIRCOUNT) < INDIRCOUNT(sb)) {
+ offsets[n++] = DIRCOUNT;
offsets[n++] = block;
- } else if ((block -= 256) < 256*256) {
- offsets[n++] = 8;
- offsets[n++] = block>>8;
- offsets[n++] = block & 255;
+ } else if ((block -= INDIRCOUNT(sb)) < INDIRCOUNT(sb) * INDIRCOUNT(sb)) {
+ offsets[n++] = DIRCOUNT + 1;
+ offsets[n++] = block / INDIRCOUNT(sb);
+ offsets[n++] = block % INDIRCOUNT(sb);
} else {
- block -= 256*256;
- offsets[n++] = 9;
- offsets[n++] = block>>16;
- offsets[n++] = (block>>8) & 255;
- offsets[n++] = block & 255;
+ block -= INDIRCOUNT(sb) * INDIRCOUNT(sb);
+ offsets[n++] = DIRCOUNT + 2;
+ offsets[n++] = (block / INDIRCOUNT(sb)) / INDIRCOUNT(sb);
+ offsets[n++] = (block / INDIRCOUNT(sb)) % INDIRCOUNT(sb);
+ offsets[n++] = block % INDIRCOUNT(sb);
}
return n;
}
diff --git a/fs/namei.c b/fs/namei.c
index 48e1f60..868d0cb 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1621,6 +1621,7 @@
case LAST_DOTDOT:
follow_dotdot(nd);
dir = nd->path.dentry;
+ case LAST_DOT:
if (nd->path.mnt->mnt_sb->s_type->fs_flags & FS_REVAL_DOT) {
if (!dir->d_op->d_revalidate(dir, nd)) {
error = -ESTALE;
@@ -1628,7 +1629,6 @@
}
}
/* fallthrough */
- case LAST_DOT:
case LAST_ROOT:
if (open_flag & O_CREAT)
goto exit;
diff --git a/fs/ncpfs/dir.c b/fs/ncpfs/dir.c
index 92dde6f..9578cbe 100644
--- a/fs/ncpfs/dir.c
+++ b/fs/ncpfs/dir.c
@@ -49,6 +49,7 @@
const struct file_operations ncp_dir_operations =
{
+ .llseek = generic_file_llseek,
.read = generic_read_dir,
.readdir = ncp_readdir,
.unlocked_ioctl = ncp_ioctl,
diff --git a/fs/ncpfs/file.c b/fs/ncpfs/file.c
index b938708..3639cc5 100644
--- a/fs/ncpfs/file.c
+++ b/fs/ncpfs/file.c
@@ -22,7 +22,7 @@
#include <linux/ncp_fs.h>
#include "ncplib_kernel.h"
-static int ncp_fsync(struct file *file, struct dentry *dentry, int datasync)
+static int ncp_fsync(struct file *file, int datasync)
{
return 0;
}
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index 7ec9b34..d25b525 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -1286,6 +1286,55 @@
#endif /* CONFIG_NFS_V4_1 */
}
+static int nfs4_server_common_setup(struct nfs_server *server,
+ struct nfs_fh *mntfh)
+{
+ struct nfs_fattr *fattr;
+ int error;
+
+ BUG_ON(!server->nfs_client);
+ BUG_ON(!server->nfs_client->rpc_ops);
+ BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
+
+ fattr = nfs_alloc_fattr();
+ if (fattr == NULL)
+ return -ENOMEM;
+
+ /* We must ensure the session is initialised first */
+ error = nfs4_init_session(server);
+ if (error < 0)
+ goto out;
+
+ /* Probe the root fh to retrieve its FSID and filehandle */
+ error = nfs4_get_rootfh(server, mntfh);
+ if (error < 0)
+ goto out;
+
+ dprintk("Server FSID: %llx:%llx\n",
+ (unsigned long long) server->fsid.major,
+ (unsigned long long) server->fsid.minor);
+ dprintk("Mount FH: %d\n", mntfh->size);
+
+ nfs4_session_set_rwsize(server);
+
+ error = nfs_probe_fsinfo(server, mntfh, fattr);
+ if (error < 0)
+ goto out;
+
+ if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN)
+ server->namelen = NFS4_MAXNAMLEN;
+
+ spin_lock(&nfs_client_lock);
+ list_add_tail(&server->client_link, &server->nfs_client->cl_superblocks);
+ list_add_tail(&server->master_link, &nfs_volume_list);
+ spin_unlock(&nfs_client_lock);
+
+ server->mount_time = jiffies;
+out:
+ nfs_free_fattr(fattr);
+ return error;
+}
+
/*
* Create a version 4 volume record
*/
@@ -1346,7 +1395,6 @@
struct nfs_server *nfs4_create_server(const struct nfs_parsed_mount_data *data,
struct nfs_fh *mntfh)
{
- struct nfs_fattr *fattr;
struct nfs_server *server;
int error;
@@ -1356,55 +1404,19 @@
if (!server)
return ERR_PTR(-ENOMEM);
- error = -ENOMEM;
- fattr = nfs_alloc_fattr();
- if (fattr == NULL)
- goto error;
-
/* set up the general RPC client */
error = nfs4_init_server(server, data);
if (error < 0)
goto error;
- BUG_ON(!server->nfs_client);
- BUG_ON(!server->nfs_client->rpc_ops);
- BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
-
- error = nfs4_init_session(server);
+ error = nfs4_server_common_setup(server, mntfh);
if (error < 0)
goto error;
- /* Probe the root fh to retrieve its FSID */
- error = nfs4_get_rootfh(server, mntfh);
- if (error < 0)
- goto error;
-
- dprintk("Server FSID: %llx:%llx\n",
- (unsigned long long) server->fsid.major,
- (unsigned long long) server->fsid.minor);
- dprintk("Mount FH: %d\n", mntfh->size);
-
- nfs4_session_set_rwsize(server);
-
- error = nfs_probe_fsinfo(server, mntfh, fattr);
- if (error < 0)
- goto error;
-
- if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN)
- server->namelen = NFS4_MAXNAMLEN;
-
- spin_lock(&nfs_client_lock);
- list_add_tail(&server->client_link, &server->nfs_client->cl_superblocks);
- list_add_tail(&server->master_link, &nfs_volume_list);
- spin_unlock(&nfs_client_lock);
-
- server->mount_time = jiffies;
dprintk("<-- nfs4_create_server() = %p\n", server);
- nfs_free_fattr(fattr);
return server;
error:
- nfs_free_fattr(fattr);
nfs_free_server(server);
dprintk("<-- nfs4_create_server() = error %d\n", error);
return ERR_PTR(error);
@@ -1418,7 +1430,6 @@
{
struct nfs_client *parent_client;
struct nfs_server *server, *parent_server;
- struct nfs_fattr *fattr;
int error;
dprintk("--> nfs4_create_referral_server()\n");
@@ -1427,11 +1438,6 @@
if (!server)
return ERR_PTR(-ENOMEM);
- error = -ENOMEM;
- fattr = nfs_alloc_fattr();
- if (fattr == NULL)
- goto error;
-
parent_server = NFS_SB(data->sb);
parent_client = parent_server->nfs_client;
@@ -1456,40 +1462,14 @@
if (error < 0)
goto error;
- BUG_ON(!server->nfs_client);
- BUG_ON(!server->nfs_client->rpc_ops);
- BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
-
- /* Probe the root fh to retrieve its FSID and filehandle */
- error = nfs4_get_rootfh(server, mntfh);
+ error = nfs4_server_common_setup(server, mntfh);
if (error < 0)
goto error;
- /* probe the filesystem info for this server filesystem */
- error = nfs_probe_fsinfo(server, mntfh, fattr);
- if (error < 0)
- goto error;
-
- if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN)
- server->namelen = NFS4_MAXNAMLEN;
-
- dprintk("Referral FSID: %llx:%llx\n",
- (unsigned long long) server->fsid.major,
- (unsigned long long) server->fsid.minor);
-
- spin_lock(&nfs_client_lock);
- list_add_tail(&server->client_link, &server->nfs_client->cl_superblocks);
- list_add_tail(&server->master_link, &nfs_volume_list);
- spin_unlock(&nfs_client_lock);
-
- server->mount_time = jiffies;
-
- nfs_free_fattr(fattr);
dprintk("<-- nfs_create_referral_server() = %p\n", server);
return server;
error:
- nfs_free_fattr(fattr);
nfs_free_server(server);
dprintk("<-- nfs4_create_referral_server() = error %d\n", error);
return ERR_PTR(error);
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index ee9a179..e60416d 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -53,7 +53,7 @@
static int nfs_mknod(struct inode *, struct dentry *, int, dev_t);
static int nfs_rename(struct inode *, struct dentry *,
struct inode *, struct dentry *);
-static int nfs_fsync_dir(struct file *, struct dentry *, int);
+static int nfs_fsync_dir(struct file *, int);
static loff_t nfs_llseek_dir(struct file *, loff_t, int);
const struct file_operations nfs_dir_operations = {
@@ -641,8 +641,10 @@
* All directory operations under NFS are synchronous, so fsync()
* is a dummy operation.
*/
-static int nfs_fsync_dir(struct file *filp, struct dentry *dentry, int datasync)
+static int nfs_fsync_dir(struct file *filp, int datasync)
{
+ struct dentry *dentry = filp->f_path.dentry;
+
dfprintk(FILE, "NFS: fsync dir(%s/%s) datasync %d\n",
dentry->d_parent->d_name.name, dentry->d_name.name,
datasync);
@@ -1708,7 +1710,7 @@
}
}
-int nfs_access_cache_shrinker(int nr_to_scan, gfp_t gfp_mask)
+int nfs_access_cache_shrinker(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
{
LIST_HEAD(head);
struct nfs_inode *nfsi;
@@ -1741,6 +1743,7 @@
clear_bit(NFS_INO_ACL_LRU_SET, &nfsi->flags);
smp_mb__after_clear_bit();
}
+ spin_unlock(&inode->i_lock);
}
spin_unlock(&nfs_access_lru_lock);
nfs_access_free_list(&head);
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index cac96bc..36a5e74 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -53,7 +53,7 @@
static ssize_t nfs_file_write(struct kiocb *, const struct iovec *iov,
unsigned long nr_segs, loff_t pos);
static int nfs_file_flush(struct file *, fl_owner_t id);
-static int nfs_file_fsync(struct file *, struct dentry *dentry, int datasync);
+static int nfs_file_fsync(struct file *, int datasync);
static int nfs_check_flags(int flags);
static int nfs_lock(struct file *filp, int cmd, struct file_lock *fl);
static int nfs_flock(struct file *filp, int cmd, struct file_lock *fl);
@@ -322,8 +322,9 @@
* whether any write errors occurred for this process.
*/
static int
-nfs_file_fsync(struct file *file, struct dentry *dentry, int datasync)
+nfs_file_fsync(struct file *file, int datasync)
{
+ struct dentry *dentry = file->f_path.dentry;
struct nfs_open_context *ctx = nfs_file_open_context(file);
struct inode *inode = dentry->d_inode;
diff --git a/fs/nfs/getroot.c b/fs/nfs/getroot.c
index 7428f7d..a70e446 100644
--- a/fs/nfs/getroot.c
+++ b/fs/nfs/getroot.c
@@ -146,7 +146,7 @@
goto out;
}
- if (!(fsinfo.fattr->valid & NFS_ATTR_FATTR_MODE)
+ if (!(fsinfo.fattr->valid & NFS_ATTR_FATTR_TYPE)
|| !S_ISDIR(fsinfo.fattr->mode)) {
printk(KERN_ERR "nfs4_get_rootfh:"
" getroot encountered non-directory\n");
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index d8bd619..e70f44b 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -205,7 +205,8 @@
void nfs_close_context(struct nfs_open_context *ctx, int is_sync);
/* dir.c */
-extern int nfs_access_cache_shrinker(int nr_to_scan, gfp_t gfp_mask);
+extern int nfs_access_cache_shrinker(struct shrinker *shrink,
+ int nr_to_scan, gfp_t gfp_mask);
/* inode.c */
extern struct workqueue_struct *nfsiod_workqueue;
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 6bdef28..65c8dae 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -862,8 +862,8 @@
bmval1 |= FATTR4_WORD1_TIME_ACCESS_SET;
*p++ = cpu_to_be32(NFS4_SET_TO_CLIENT_TIME);
*p++ = cpu_to_be32(0);
- *p++ = cpu_to_be32(iap->ia_mtime.tv_sec);
- *p++ = cpu_to_be32(iap->ia_mtime.tv_nsec);
+ *p++ = cpu_to_be32(iap->ia_atime.tv_sec);
+ *p++ = cpu_to_be32(iap->ia_atime.tv_nsec);
}
else if (iap->ia_valid & ATTR_ATIME) {
bmval1 |= FATTR4_WORD1_TIME_ACCESS_SET;
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 04214fc..f9df16d 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -570,6 +570,22 @@
nfs_show_mountd_netid(m, nfss, showdefaults);
}
+#ifdef CONFIG_NFS_V4
+static void nfs_show_nfsv4_options(struct seq_file *m, struct nfs_server *nfss,
+ int showdefaults)
+{
+ struct nfs_client *clp = nfss->nfs_client;
+
+ seq_printf(m, ",clientaddr=%s", clp->cl_ipaddr);
+ seq_printf(m, ",minorversion=%u", clp->cl_minorversion);
+}
+#else
+static void nfs_show_nfsv4_options(struct seq_file *m, struct nfs_server *nfss,
+ int showdefaults)
+{
+}
+#endif
+
/*
* Describe the mount options in force on this server representation
*/
@@ -631,11 +647,9 @@
if (version != 4)
nfs_show_mountd_options(m, nfss, showdefaults);
+ else
+ nfs_show_nfsv4_options(m, nfss, showdefaults);
-#ifdef CONFIG_NFS_V4
- if (clp->rpc_ops->version == 4)
- seq_printf(m, ",clientaddr=%s", clp->cl_ipaddr);
-#endif
if (nfss->options & NFS_OPTION_FSCACHE)
seq_printf(m, ",fsc");
}
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 3aea3ca..91679e2 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -1386,7 +1386,7 @@
int res = 0;
if (!nfs_commit_set_lock(NFS_I(inode), may_wait))
- goto out;
+ goto out_mark_dirty;
spin_lock(&inode->i_lock);
res = nfs_scan_commit(inode, &head, 0, 0);
spin_unlock(&inode->i_lock);
@@ -1398,9 +1398,18 @@
wait_on_bit(&NFS_I(inode)->flags, NFS_INO_COMMIT,
nfs_wait_bit_killable,
TASK_KILLABLE);
+ else
+ goto out_mark_dirty;
} else
nfs_commit_clear_lock(NFS_I(inode));
-out:
+ return res;
+ /* Note: If we exit without ensuring that the commit is complete,
+ * we must mark the inode as dirty. Otherwise, future calls to
+ * sync_inode() with the WB_SYNC_ALL flag set will fail to ensure
+ * that the data is on the disk.
+ */
+out_mark_dirty:
+ __mark_inode_dirty(inode, I_DIRTY_DATASYNC);
return res;
}
@@ -1509,14 +1518,17 @@
};
int ret;
- while(PagePrivate(page)) {
+ for (;;) {
wait_on_page_writeback(page);
if (clear_page_dirty_for_io(page)) {
ret = nfs_writepage_locked(page, &wbc);
if (ret < 0)
goto out_error;
+ continue;
}
- ret = sync_inode(inode, &wbc);
+ if (!PagePrivate(page))
+ break;
+ ret = nfs_commit_inode(inode, FLUSH_SYNC);
if (ret < 0)
goto out_error;
}
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 12f7109..4a27347 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -4122,8 +4122,8 @@
nfs4_lock_state();
nfs4_release_reclaim();
__nfs4_state_shutdown();
- nfsd4_destroy_callback_queue();
nfs4_unlock_state();
+ nfsd4_destroy_callback_queue();
}
/*
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index ebbf3b6..3c11112 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -443,8 +443,7 @@
if (size_change)
put_write_access(inode);
if (!err)
- if (EX_ISSYNC(fhp->fh_export))
- write_inode_now(inode, 1);
+ commit_metadata(fhp);
out:
return err;
diff --git a/fs/nilfs2/btree.h b/fs/nilfs2/btree.h
index af638d5..43c8c5b 100644
--- a/fs/nilfs2/btree.h
+++ b/fs/nilfs2/btree.h
@@ -75,8 +75,6 @@
extern struct kmem_cache *nilfs_btree_path_cache;
-int nilfs_btree_path_cache_init(void);
-void nilfs_btree_path_cache_destroy(void);
int nilfs_btree_init(struct nilfs_bmap *);
int nilfs_btree_convert_and_insert(struct nilfs_bmap *, __u64, __u64,
const __u64 *, const __u64 *, int);
diff --git a/fs/nilfs2/file.c b/fs/nilfs2/file.c
index 30292df..c9a30d7 100644
--- a/fs/nilfs2/file.c
+++ b/fs/nilfs2/file.c
@@ -27,7 +27,7 @@
#include "nilfs.h"
#include "segment.h"
-int nilfs_sync_file(struct file *file, struct dentry *dentry, int datasync)
+int nilfs_sync_file(struct file *file, int datasync)
{
/*
* Called from fsync() system call
@@ -37,7 +37,7 @@
* This function should be implemented when the writeback function
* will be implemented.
*/
- struct inode *inode = dentry->d_inode;
+ struct inode *inode = file->f_mapping->host;
int err;
if (!nilfs_inode_dirty(inode))
diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h
index 8723e5b..47d6d79 100644
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -228,7 +228,7 @@
struct page *, struct inode *);
/* file.c */
-extern int nilfs_sync_file(struct file *, struct dentry *, int);
+extern int nilfs_sync_file(struct file *, int);
/* ioctl.c */
long nilfs_ioctl(struct file *, unsigned int, unsigned long);
diff --git a/fs/nilfs2/segbuf.h b/fs/nilfs2/segbuf.h
index fdf1c3b..85fbb66 100644
--- a/fs/nilfs2/segbuf.h
+++ b/fs/nilfs2/segbuf.h
@@ -127,8 +127,6 @@
extern struct kmem_cache *nilfs_segbuf_cachep;
-int __init nilfs_init_segbuf_cache(void);
-void nilfs_destroy_segbuf_cache(void);
struct nilfs_segment_buffer *nilfs_segbuf_new(struct super_block *);
void nilfs_segbuf_free(struct nilfs_segment_buffer *);
void nilfs_segbuf_map(struct nilfs_segment_buffer *, __u64, unsigned long,
diff --git a/fs/nilfs2/segment.h b/fs/nilfs2/segment.h
index dca1423..01e20db 100644
--- a/fs/nilfs2/segment.h
+++ b/fs/nilfs2/segment.h
@@ -221,8 +221,6 @@
extern struct kmem_cache *nilfs_transaction_cachep;
/* segment.c */
-extern int nilfs_init_transaction_cache(void);
-extern void nilfs_destroy_transaction_cache(void);
extern void nilfs_relax_pressure_in_lock(struct super_block *);
extern int nilfs_construct_segment(struct super_block *);
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index 03b34b7..414ef68 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -1130,13 +1130,13 @@
static void nilfs_destroy_cachep(void)
{
- if (nilfs_inode_cachep)
+ if (nilfs_inode_cachep)
kmem_cache_destroy(nilfs_inode_cachep);
- if (nilfs_transaction_cachep)
+ if (nilfs_transaction_cachep)
kmem_cache_destroy(nilfs_transaction_cachep);
- if (nilfs_segbuf_cachep)
+ if (nilfs_segbuf_cachep)
kmem_cache_destroy(nilfs_segbuf_cachep);
- if (nilfs_btree_path_cache)
+ if (nilfs_btree_path_cache)
kmem_cache_destroy(nilfs_btree_path_cache);
}
diff --git a/fs/ntfs/dir.c b/fs/ntfs/dir.c
index fe44d3f..0f48e7c 100644
--- a/fs/ntfs/dir.c
+++ b/fs/ntfs/dir.c
@@ -1527,10 +1527,9 @@
* this problem for now. We do write the $BITMAP attribute if it is present
* which is the important one for a directory so things are not too bad.
*/
-static int ntfs_dir_fsync(struct file *filp, struct dentry *dentry,
- int datasync)
+static int ntfs_dir_fsync(struct file *filp, int datasync)
{
- struct inode *bmp_vi, *vi = dentry->d_inode;
+ struct inode *bmp_vi, *vi = filp->f_mapping->host;
int err, ret;
ntfs_attr na;
diff --git a/fs/ntfs/file.c b/fs/ntfs/file.c
index a1924a0..113ebd9 100644
--- a/fs/ntfs/file.c
+++ b/fs/ntfs/file.c
@@ -2133,7 +2133,6 @@
/**
* ntfs_file_fsync - sync a file to disk
* @filp: file to be synced
- * @dentry: dentry describing the file to sync
* @datasync: if non-zero only flush user data and not metadata
*
* Data integrity sync of a file to disk. Used for fsync, fdatasync, and msync
@@ -2149,19 +2148,15 @@
* Also, if @datasync is true, we do not wait on the inode to be written out
* but we always wait on the page cache pages to be written out.
*
- * Note: In the past @filp could be NULL so we ignore it as we don't need it
- * anyway.
- *
* Locking: Caller must hold i_mutex on the inode.
*
* TODO: We should probably also write all attribute/index inodes associated
* with this inode but since we have no simple way of getting to them we ignore
* this problem for now.
*/
-static int ntfs_file_fsync(struct file *filp, struct dentry *dentry,
- int datasync)
+static int ntfs_file_fsync(struct file *filp, int datasync)
{
- struct inode *vi = dentry->d_inode;
+ struct inode *vi = filp->f_mapping->host;
int err, ret = 0;
ntfs_debug("Entering for inode 0x%lx.", vi->i_ino);
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index 3623ca2..356e976 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -196,15 +196,14 @@
dump_stack();
goto bail;
}
-
- past_eof = ocfs2_blocks_for_bytes(inode->i_sb, i_size_read(inode));
- mlog(0, "Inode %lu, past_eof = %llu\n", inode->i_ino,
- (unsigned long long)past_eof);
-
- if (create && (iblock >= past_eof))
- set_buffer_new(bh_result);
}
+ past_eof = ocfs2_blocks_for_bytes(inode->i_sb, i_size_read(inode));
+ mlog(0, "Inode %lu, past_eof = %llu\n", inode->i_ino,
+ (unsigned long long)past_eof);
+ if (create && (iblock >= past_eof))
+ set_buffer_new(bh_result);
+
bail:
if (err < 0)
err = -EIO;
@@ -459,36 +458,6 @@
return ret;
}
-handle_t *ocfs2_start_walk_page_trans(struct inode *inode,
- struct page *page,
- unsigned from,
- unsigned to)
-{
- struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
- handle_t *handle;
- int ret = 0;
-
- handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
- if (IS_ERR(handle)) {
- ret = -ENOMEM;
- mlog_errno(ret);
- goto out;
- }
-
- if (ocfs2_should_order_data(inode)) {
- ret = ocfs2_jbd2_file_inode(handle, inode);
- if (ret < 0)
- mlog_errno(ret);
- }
-out:
- if (ret) {
- if (!IS_ERR(handle))
- ocfs2_commit_trans(osb, handle);
- handle = ERR_PTR(ret);
- }
- return handle;
-}
-
static sector_t ocfs2_bmap(struct address_space *mapping, sector_t block)
{
sector_t status;
@@ -1131,23 +1100,37 @@
*/
static int ocfs2_grab_pages_for_write(struct address_space *mapping,
struct ocfs2_write_ctxt *wc,
- u32 cpos, loff_t user_pos, int new,
+ u32 cpos, loff_t user_pos,
+ unsigned user_len, int new,
struct page *mmap_page)
{
int ret = 0, i;
- unsigned long start, target_index, index;
+ unsigned long start, target_index, end_index, index;
struct inode *inode = mapping->host;
+ loff_t last_byte;
target_index = user_pos >> PAGE_CACHE_SHIFT;
/*
* Figure out how many pages we'll be manipulating here. For
* non allocating write, we just change the one
- * page. Otherwise, we'll need a whole clusters worth.
+ * page. Otherwise, we'll need a whole clusters worth. If we're
+ * writing past i_size, we only need enough pages to cover the
+ * last page of the write.
*/
if (new) {
wc->w_num_pages = ocfs2_pages_per_cluster(inode->i_sb);
start = ocfs2_align_clusters_to_page_index(inode->i_sb, cpos);
+ /*
+ * We need the index *past* the last page we could possibly
+ * touch. This is the page past the end of the write or
+ * i_size, whichever is greater.
+ */
+ last_byte = max(user_pos + user_len, i_size_read(inode));
+ BUG_ON(last_byte < 1);
+ end_index = ((last_byte - 1) >> PAGE_CACHE_SHIFT) + 1;
+ if ((start + wc->w_num_pages) > end_index)
+ wc->w_num_pages = end_index - start;
} else {
wc->w_num_pages = 1;
start = target_index;
@@ -1620,21 +1603,20 @@
* write path can treat it as an non-allocating write, which has no
* special case code for sparse/nonsparse files.
*/
-static int ocfs2_expand_nonsparse_inode(struct inode *inode, loff_t pos,
- unsigned len,
+static int ocfs2_expand_nonsparse_inode(struct inode *inode,
+ struct buffer_head *di_bh,
+ loff_t pos, unsigned len,
struct ocfs2_write_ctxt *wc)
{
int ret;
- struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
loff_t newsize = pos + len;
- if (ocfs2_sparse_alloc(osb))
- return 0;
+ BUG_ON(ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)));
if (newsize <= i_size_read(inode))
return 0;
- ret = ocfs2_extend_no_holes(inode, newsize, pos);
+ ret = ocfs2_extend_no_holes(inode, di_bh, newsize, pos);
if (ret)
mlog_errno(ret);
@@ -1644,6 +1626,18 @@
return ret;
}
+static int ocfs2_zero_tail(struct inode *inode, struct buffer_head *di_bh,
+ loff_t pos)
+{
+ int ret = 0;
+
+ BUG_ON(!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)));
+ if (pos > i_size_read(inode))
+ ret = ocfs2_zero_extend(inode, di_bh, pos);
+
+ return ret;
+}
+
int ocfs2_write_begin_nolock(struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata,
@@ -1679,7 +1673,11 @@
}
}
- ret = ocfs2_expand_nonsparse_inode(inode, pos, len, wc);
+ if (ocfs2_sparse_alloc(osb))
+ ret = ocfs2_zero_tail(inode, di_bh, pos);
+ else
+ ret = ocfs2_expand_nonsparse_inode(inode, di_bh, pos, len,
+ wc);
if (ret) {
mlog_errno(ret);
goto out;
@@ -1789,7 +1787,7 @@
* that we can zero and flush if we error after adding the
* extent.
*/
- ret = ocfs2_grab_pages_for_write(mapping, wc, wc->w_cpos, pos,
+ ret = ocfs2_grab_pages_for_write(mapping, wc, wc->w_cpos, pos, len,
cluster_of_pages, mmap_page);
if (ret) {
mlog_errno(ret);
diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c
index 6b5a492..153abb5 100644
--- a/fs/ocfs2/dlm/dlmdomain.c
+++ b/fs/ocfs2/dlm/dlmdomain.c
@@ -1671,7 +1671,7 @@
struct dlm_ctxt *dlm = NULL;
struct dlm_ctxt *new_ctxt = NULL;
- if (strlen(domain) > O2NM_MAX_NAME_LEN) {
+ if (strlen(domain) >= O2NM_MAX_NAME_LEN) {
ret = -ENAMETOOLONG;
mlog(ML_ERROR, "domain name length too long\n");
goto leave;
@@ -1709,6 +1709,7 @@
}
if (dlm_protocol_compare(&dlm->fs_locking_proto, fs_proto)) {
+ spin_unlock(&dlm_domain_lock);
mlog(ML_ERROR,
"Requested locking protocol version is not "
"compatible with already registered domain "
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index 4a7506a..94b97fc 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -2808,14 +2808,8 @@
mlog(0, "trying again...\n");
goto again;
}
- /* now that we are sure the MIGRATING state is there, drop
- * the unneded state which blocked threads trying to DIRTY */
- spin_lock(&res->spinlock);
- BUG_ON(!(res->state & DLM_LOCK_RES_BLOCK_DIRTY));
- BUG_ON(!(res->state & DLM_LOCK_RES_MIGRATING));
- res->state &= ~DLM_LOCK_RES_BLOCK_DIRTY;
- spin_unlock(&res->spinlock);
+ ret = 0;
/* did the target go down or die? */
spin_lock(&dlm->spinlock);
if (!test_bit(target, dlm->domain_map)) {
@@ -2826,9 +2820,21 @@
spin_unlock(&dlm->spinlock);
/*
+ * if target is down, we need to clear DLM_LOCK_RES_BLOCK_DIRTY for
+ * another try; otherwise, we are sure the MIGRATING state is there,
+ * drop the unneded state which blocked threads trying to DIRTY
+ */
+ spin_lock(&res->spinlock);
+ BUG_ON(!(res->state & DLM_LOCK_RES_BLOCK_DIRTY));
+ res->state &= ~DLM_LOCK_RES_BLOCK_DIRTY;
+ if (!ret)
+ BUG_ON(!(res->state & DLM_LOCK_RES_MIGRATING));
+ spin_unlock(&res->spinlock);
+
+ /*
* at this point:
*
- * o the DLM_LOCK_RES_MIGRATING flag is set
+ * o the DLM_LOCK_RES_MIGRATING flag is set if target not down
* o there are no pending asts on this lockres
* o all processes trying to reserve an ast on this
* lockres must wait for the MIGRATING flag to clear
diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c
index f8b75ce..9dfaac7 100644
--- a/fs/ocfs2/dlm/dlmrecovery.c
+++ b/fs/ocfs2/dlm/dlmrecovery.c
@@ -463,7 +463,7 @@
if (dlm->reco.dead_node == O2NM_INVALID_NODE_NUM) {
int bit;
- bit = find_next_bit (dlm->recovery_map, O2NM_MAX_NODES+1, 0);
+ bit = find_next_bit (dlm->recovery_map, O2NM_MAX_NODES, 0);
if (bit >= O2NM_MAX_NODES || bit < 0)
dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM);
else
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 97e54b9..2b10b36 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -175,13 +175,12 @@
return 0;
}
-static int ocfs2_sync_file(struct file *file,
- struct dentry *dentry,
- int datasync)
+static int ocfs2_sync_file(struct file *file, int datasync)
{
int err = 0;
journal_t *journal;
- struct inode *inode = dentry->d_inode;
+ struct dentry *dentry = file->f_path.dentry;
+ struct inode *inode = file->f_mapping->host;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
mlog_entry("(0x%p, 0x%p, %d, '%.*s')\n", file, dentry, datasync,
@@ -725,28 +724,55 @@
return status;
}
+/*
+ * While a write will already be ordering the data, a truncate will not.
+ * Thus, we need to explicitly order the zeroed pages.
+ */
+static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode)
+{
+ struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
+ handle_t *handle = NULL;
+ int ret = 0;
+
+ if (!ocfs2_should_order_data(inode))
+ goto out;
+
+ handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
+ if (IS_ERR(handle)) {
+ ret = -ENOMEM;
+ mlog_errno(ret);
+ goto out;
+ }
+
+ ret = ocfs2_jbd2_file_inode(handle, inode);
+ if (ret < 0)
+ mlog_errno(ret);
+
+out:
+ if (ret) {
+ if (!IS_ERR(handle))
+ ocfs2_commit_trans(osb, handle);
+ handle = ERR_PTR(ret);
+ }
+ return handle;
+}
+
/* Some parts of this taken from generic_cont_expand, which turned out
* to be too fragile to do exactly what we need without us having to
* worry about recursive locking in ->write_begin() and ->write_end(). */
-static int ocfs2_write_zero_page(struct inode *inode,
- u64 size)
+static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from,
+ u64 abs_to)
{
struct address_space *mapping = inode->i_mapping;
struct page *page;
- unsigned long index;
- unsigned int offset;
+ unsigned long index = abs_from >> PAGE_CACHE_SHIFT;
handle_t *handle = NULL;
- int ret;
+ int ret = 0;
+ unsigned zero_from, zero_to, block_start, block_end;
- offset = (size & (PAGE_CACHE_SIZE-1)); /* Within page */
- /* ugh. in prepare/commit_write, if from==to==start of block, we
- ** skip the prepare. make sure we never send an offset for the start
- ** of a block
- */
- if ((offset & (inode->i_sb->s_blocksize - 1)) == 0) {
- offset++;
- }
- index = size >> PAGE_CACHE_SHIFT;
+ BUG_ON(abs_from >= abs_to);
+ BUG_ON(abs_to > (((u64)index + 1) << PAGE_CACHE_SHIFT));
+ BUG_ON(abs_from & (inode->i_blkbits - 1));
page = grab_cache_page(mapping, index);
if (!page) {
@@ -755,31 +781,56 @@
goto out;
}
- ret = ocfs2_prepare_write_nolock(inode, page, offset, offset);
- if (ret < 0) {
- mlog_errno(ret);
- goto out_unlock;
- }
+ /* Get the offsets within the page that we want to zero */
+ zero_from = abs_from & (PAGE_CACHE_SIZE - 1);
+ zero_to = abs_to & (PAGE_CACHE_SIZE - 1);
+ if (!zero_to)
+ zero_to = PAGE_CACHE_SIZE;
- if (ocfs2_should_order_data(inode)) {
- handle = ocfs2_start_walk_page_trans(inode, page, offset,
- offset);
- if (IS_ERR(handle)) {
- ret = PTR_ERR(handle);
- handle = NULL;
+ mlog(0,
+ "abs_from = %llu, abs_to = %llu, index = %lu, zero_from = %u, zero_to = %u\n",
+ (unsigned long long)abs_from, (unsigned long long)abs_to,
+ index, zero_from, zero_to);
+
+ /* We know that zero_from is block aligned */
+ for (block_start = zero_from; block_start < zero_to;
+ block_start = block_end) {
+ block_end = block_start + (1 << inode->i_blkbits);
+
+ /*
+ * block_start is block-aligned. Bump it by one to
+ * force ocfs2_{prepare,commit}_write() to zero the
+ * whole block.
+ */
+ ret = ocfs2_prepare_write_nolock(inode, page,
+ block_start + 1,
+ block_start + 1);
+ if (ret < 0) {
+ mlog_errno(ret);
goto out_unlock;
}
- }
- /* must not update i_size! */
- ret = block_commit_write(page, offset, offset);
- if (ret < 0)
- mlog_errno(ret);
- else
- ret = 0;
+ if (!handle) {
+ handle = ocfs2_zero_start_ordered_transaction(inode);
+ if (IS_ERR(handle)) {
+ ret = PTR_ERR(handle);
+ handle = NULL;
+ break;
+ }
+ }
+
+ /* must not update i_size! */
+ ret = block_commit_write(page, block_start + 1,
+ block_start + 1);
+ if (ret < 0)
+ mlog_errno(ret);
+ else
+ ret = 0;
+ }
if (handle)
ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
+
out_unlock:
unlock_page(page);
page_cache_release(page);
@@ -787,22 +838,114 @@
return ret;
}
-static int ocfs2_zero_extend(struct inode *inode,
- u64 zero_to_size)
+/*
+ * Find the next range to zero. We do this in terms of bytes because
+ * that's what ocfs2_zero_extend() wants, and it is dealing with the
+ * pagecache. We may return multiple extents.
+ *
+ * zero_start and zero_end are ocfs2_zero_extend()s current idea of what
+ * needs to be zeroed. range_start and range_end return the next zeroing
+ * range. A subsequent call should pass the previous range_end as its
+ * zero_start. If range_end is 0, there's nothing to do.
+ *
+ * Unwritten extents are skipped over. Refcounted extents are CoWd.
+ */
+static int ocfs2_zero_extend_get_range(struct inode *inode,
+ struct buffer_head *di_bh,
+ u64 zero_start, u64 zero_end,
+ u64 *range_start, u64 *range_end)
{
- int ret = 0;
- u64 start_off;
- struct super_block *sb = inode->i_sb;
+ int rc = 0, needs_cow = 0;
+ u32 p_cpos, zero_clusters = 0;
+ u32 zero_cpos =
+ zero_start >> OCFS2_SB(inode->i_sb)->s_clustersize_bits;
+ u32 last_cpos = ocfs2_clusters_for_bytes(inode->i_sb, zero_end);
+ unsigned int num_clusters = 0;
+ unsigned int ext_flags = 0;
- start_off = ocfs2_align_bytes_to_blocks(sb, i_size_read(inode));
- while (start_off < zero_to_size) {
- ret = ocfs2_write_zero_page(inode, start_off);
- if (ret < 0) {
- mlog_errno(ret);
+ while (zero_cpos < last_cpos) {
+ rc = ocfs2_get_clusters(inode, zero_cpos, &p_cpos,
+ &num_clusters, &ext_flags);
+ if (rc) {
+ mlog_errno(rc);
goto out;
}
- start_off += sb->s_blocksize;
+ if (p_cpos && !(ext_flags & OCFS2_EXT_UNWRITTEN)) {
+ zero_clusters = num_clusters;
+ if (ext_flags & OCFS2_EXT_REFCOUNTED)
+ needs_cow = 1;
+ break;
+ }
+
+ zero_cpos += num_clusters;
+ }
+ if (!zero_clusters) {
+ *range_end = 0;
+ goto out;
+ }
+
+ while ((zero_cpos + zero_clusters) < last_cpos) {
+ rc = ocfs2_get_clusters(inode, zero_cpos + zero_clusters,
+ &p_cpos, &num_clusters,
+ &ext_flags);
+ if (rc) {
+ mlog_errno(rc);
+ goto out;
+ }
+
+ if (!p_cpos || (ext_flags & OCFS2_EXT_UNWRITTEN))
+ break;
+ if (ext_flags & OCFS2_EXT_REFCOUNTED)
+ needs_cow = 1;
+ zero_clusters += num_clusters;
+ }
+ if ((zero_cpos + zero_clusters) > last_cpos)
+ zero_clusters = last_cpos - zero_cpos;
+
+ if (needs_cow) {
+ rc = ocfs2_refcount_cow(inode, di_bh, zero_cpos, zero_clusters,
+ UINT_MAX);
+ if (rc) {
+ mlog_errno(rc);
+ goto out;
+ }
+ }
+
+ *range_start = ocfs2_clusters_to_bytes(inode->i_sb, zero_cpos);
+ *range_end = ocfs2_clusters_to_bytes(inode->i_sb,
+ zero_cpos + zero_clusters);
+
+out:
+ return rc;
+}
+
+/*
+ * Zero one range returned from ocfs2_zero_extend_get_range(). The caller
+ * has made sure that the entire range needs zeroing.
+ */
+static int ocfs2_zero_extend_range(struct inode *inode, u64 range_start,
+ u64 range_end)
+{
+ int rc = 0;
+ u64 next_pos;
+ u64 zero_pos = range_start;
+
+ mlog(0, "range_start = %llu, range_end = %llu\n",
+ (unsigned long long)range_start,
+ (unsigned long long)range_end);
+ BUG_ON(range_start >= range_end);
+
+ while (zero_pos < range_end) {
+ next_pos = (zero_pos & PAGE_CACHE_MASK) + PAGE_CACHE_SIZE;
+ if (next_pos > range_end)
+ next_pos = range_end;
+ rc = ocfs2_write_zero_page(inode, zero_pos, next_pos);
+ if (rc < 0) {
+ mlog_errno(rc);
+ break;
+ }
+ zero_pos = next_pos;
/*
* Very large extends have the potential to lock up
@@ -811,16 +954,63 @@
cond_resched();
}
-out:
+ return rc;
+}
+
+int ocfs2_zero_extend(struct inode *inode, struct buffer_head *di_bh,
+ loff_t zero_to_size)
+{
+ int ret = 0;
+ u64 zero_start, range_start = 0, range_end = 0;
+ struct super_block *sb = inode->i_sb;
+
+ zero_start = ocfs2_align_bytes_to_blocks(sb, i_size_read(inode));
+ mlog(0, "zero_start %llu for i_size %llu\n",
+ (unsigned long long)zero_start,
+ (unsigned long long)i_size_read(inode));
+ while (zero_start < zero_to_size) {
+ ret = ocfs2_zero_extend_get_range(inode, di_bh, zero_start,
+ zero_to_size,
+ &range_start,
+ &range_end);
+ if (ret) {
+ mlog_errno(ret);
+ break;
+ }
+ if (!range_end)
+ break;
+ /* Trim the ends */
+ if (range_start < zero_start)
+ range_start = zero_start;
+ if (range_end > zero_to_size)
+ range_end = zero_to_size;
+
+ ret = ocfs2_zero_extend_range(inode, range_start,
+ range_end);
+ if (ret) {
+ mlog_errno(ret);
+ break;
+ }
+ zero_start = range_end;
+ }
+
return ret;
}
-int ocfs2_extend_no_holes(struct inode *inode, u64 new_i_size, u64 zero_to)
+int ocfs2_extend_no_holes(struct inode *inode, struct buffer_head *di_bh,
+ u64 new_i_size, u64 zero_to)
{
int ret;
u32 clusters_to_add;
struct ocfs2_inode_info *oi = OCFS2_I(inode);
+ /*
+ * Only quota files call this without a bh, and they can't be
+ * refcounted.
+ */
+ BUG_ON(!di_bh && (oi->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL));
+ BUG_ON(!di_bh && !(oi->ip_flags & OCFS2_INODE_SYSTEM_FILE));
+
clusters_to_add = ocfs2_clusters_for_bytes(inode->i_sb, new_i_size);
if (clusters_to_add < oi->ip_clusters)
clusters_to_add = 0;
@@ -841,7 +1031,7 @@
* still need to zero the area between the old i_size and the
* new i_size.
*/
- ret = ocfs2_zero_extend(inode, zero_to);
+ ret = ocfs2_zero_extend(inode, di_bh, zero_to);
if (ret < 0)
mlog_errno(ret);
@@ -863,27 +1053,15 @@
goto out;
if (i_size_read(inode) == new_i_size)
- goto out;
+ goto out;
BUG_ON(new_i_size < i_size_read(inode));
/*
- * Fall through for converting inline data, even if the fs
- * supports sparse files.
- *
- * The check for inline data here is legal - nobody can add
- * the feature since we have i_mutex. We must check it again
- * after acquiring ip_alloc_sem though, as paths like mmap
- * might have raced us to converting the inode to extents.
- */
- if (!(oi->ip_dyn_features & OCFS2_INLINE_DATA_FL)
- && ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
- goto out_update_size;
-
- /*
* The alloc sem blocks people in read/write from reading our
* allocation until we're done changing it. We depend on
* i_mutex to block other extend/truncate calls while we're
- * here.
+ * here. We even have to hold it for sparse files because there
+ * might be some tail zeroing.
*/
down_write(&oi->ip_alloc_sem);
@@ -900,14 +1078,16 @@
ret = ocfs2_convert_inline_data_to_extents(inode, di_bh);
if (ret) {
up_write(&oi->ip_alloc_sem);
-
mlog_errno(ret);
goto out;
}
}
- if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
- ret = ocfs2_extend_no_holes(inode, new_i_size, new_i_size);
+ if (ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
+ ret = ocfs2_zero_extend(inode, di_bh, new_i_size);
+ else
+ ret = ocfs2_extend_no_holes(inode, di_bh, new_i_size,
+ new_i_size);
up_write(&oi->ip_alloc_sem);
@@ -1053,7 +1233,7 @@
}
/*
- * This will intentionally not wind up calling vmtruncate(),
+ * This will intentionally not wind up calling simple_setsize(),
* since all the work for a size change has been done above.
* Otherwise, we could get into problems with truncate as
* ip_alloc_sem is used there to protect against i_size
@@ -2119,9 +2299,13 @@
* direct write may have instantiated a few
* blocks outside i_size. Trim these off again.
* Don't need i_size_read because we hold i_mutex.
+ *
+ * XXX(hch): this looks buggy because ocfs2 did not
+ * actually implement ->truncate. Take a look at
+ * the new truncate sequence and update this accordingly
*/
if (*ppos + count > inode->i_size)
- vmtruncate(inode, inode->i_size);
+ simple_setsize(inode, inode->i_size);
ret = written;
goto out_dio;
}
diff --git a/fs/ocfs2/file.h b/fs/ocfs2/file.h
index d66cf4f..97bf761 100644
--- a/fs/ocfs2/file.h
+++ b/fs/ocfs2/file.h
@@ -54,8 +54,10 @@
int ocfs2_simple_size_update(struct inode *inode,
struct buffer_head *di_bh,
u64 new_i_size);
-int ocfs2_extend_no_holes(struct inode *inode, u64 new_i_size,
- u64 zero_to);
+int ocfs2_extend_no_holes(struct inode *inode, struct buffer_head *di_bh,
+ u64 new_i_size, u64 zero_to);
+int ocfs2_zero_extend(struct inode *inode, struct buffer_head *di_bh,
+ loff_t zero_to);
int ocfs2_setattr(struct dentry *dentry, struct iattr *attr);
int ocfs2_getattr(struct vfsmount *mnt, struct dentry *dentry,
struct kstat *stat);
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index 47878cf..625de9d 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -472,7 +472,7 @@
return container_of(triggers, struct ocfs2_triggers, ot_triggers);
}
-static void ocfs2_commit_trigger(struct jbd2_buffer_trigger_type *triggers,
+static void ocfs2_frozen_trigger(struct jbd2_buffer_trigger_type *triggers,
struct buffer_head *bh,
void *data, size_t size)
{
@@ -491,7 +491,7 @@
* Quota blocks have their own trigger because the struct ocfs2_block_check
* offset depends on the blocksize.
*/
-static void ocfs2_dq_commit_trigger(struct jbd2_buffer_trigger_type *triggers,
+static void ocfs2_dq_frozen_trigger(struct jbd2_buffer_trigger_type *triggers,
struct buffer_head *bh,
void *data, size_t size)
{
@@ -511,7 +511,7 @@
* Directory blocks also have their own trigger because the
* struct ocfs2_block_check offset depends on the blocksize.
*/
-static void ocfs2_db_commit_trigger(struct jbd2_buffer_trigger_type *triggers,
+static void ocfs2_db_frozen_trigger(struct jbd2_buffer_trigger_type *triggers,
struct buffer_head *bh,
void *data, size_t size)
{
@@ -544,7 +544,7 @@
static struct ocfs2_triggers di_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_dinode, i_check),
@@ -552,7 +552,7 @@
static struct ocfs2_triggers eb_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_extent_block, h_check),
@@ -560,7 +560,7 @@
static struct ocfs2_triggers rb_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_refcount_block, rf_check),
@@ -568,7 +568,7 @@
static struct ocfs2_triggers gd_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_group_desc, bg_check),
@@ -576,14 +576,14 @@
static struct ocfs2_triggers db_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_db_commit_trigger,
+ .t_frozen = ocfs2_db_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
};
static struct ocfs2_triggers xb_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_xattr_block, xb_check),
@@ -591,14 +591,14 @@
static struct ocfs2_triggers dq_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_dq_commit_trigger,
+ .t_frozen = ocfs2_dq_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
};
static struct ocfs2_triggers dr_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_dx_root_block, dr_check),
@@ -606,7 +606,7 @@
static struct ocfs2_triggers dl_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_dx_leaf, dl_check),
@@ -1936,7 +1936,7 @@
mutex_lock(&os->os_lock);
ocfs2_queue_orphan_scan(osb);
if (atomic_read(&os->os_state) == ORPHAN_SCAN_ACTIVE)
- schedule_delayed_work(&os->os_orphan_scan_work,
+ queue_delayed_work(ocfs2_wq, &os->os_orphan_scan_work,
ocfs2_orphan_scan_timeout());
mutex_unlock(&os->os_lock);
}
@@ -1976,8 +1976,8 @@
atomic_set(&os->os_state, ORPHAN_SCAN_INACTIVE);
else {
atomic_set(&os->os_state, ORPHAN_SCAN_ACTIVE);
- schedule_delayed_work(&os->os_orphan_scan_work,
- ocfs2_orphan_scan_timeout());
+ queue_delayed_work(ocfs2_wq, &os->os_orphan_scan_work,
+ ocfs2_orphan_scan_timeout());
}
}
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index 3d74196..ec6adbf 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -118,6 +118,7 @@
{
unsigned int la_mb;
unsigned int gd_mb;
+ unsigned int la_max_mb;
unsigned int megs_per_slot;
struct super_block *sb = osb->sb;
@@ -182,6 +183,12 @@
if (megs_per_slot < la_mb)
la_mb = megs_per_slot;
+ /* We can't store more bits than we can in a block. */
+ la_max_mb = ocfs2_clusters_to_megabytes(osb->sb,
+ ocfs2_local_alloc_size(sb) * 8);
+ if (la_mb > la_max_mb)
+ la_mb = la_max_mb;
+
return la_mb;
}
diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index 2bb35fe..4607923 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -775,7 +775,7 @@
* locking allocators ranks above a transaction start
*/
WARN_ON(journal_current_handle());
- status = ocfs2_extend_no_holes(gqinode,
+ status = ocfs2_extend_no_holes(gqinode, NULL,
gqinode->i_size + (need_alloc << sb->s_blocksize_bits),
gqinode->i_size);
if (status < 0)
diff --git a/fs/ocfs2/quota_local.c b/fs/ocfs2/quota_local.c
index 8bd70d4..dc78764 100644
--- a/fs/ocfs2/quota_local.c
+++ b/fs/ocfs2/quota_local.c
@@ -971,7 +971,7 @@
u64 p_blkno;
/* We are protected by dqio_sem so no locking needed */
- status = ocfs2_extend_no_holes(lqinode,
+ status = ocfs2_extend_no_holes(lqinode, NULL,
lqinode->i_size + 2 * sb->s_blocksize,
lqinode->i_size);
if (status < 0) {
@@ -1114,7 +1114,7 @@
return ocfs2_local_quota_add_chunk(sb, type, offset);
/* We are protected by dqio_sem so no locking needed */
- status = ocfs2_extend_no_holes(lqinode,
+ status = ocfs2_extend_no_holes(lqinode, NULL,
lqinode->i_size + sb->s_blocksize,
lqinode->i_size);
if (status < 0) {
diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c
index 4793f36..3ac5aa7 100644
--- a/fs/ocfs2/refcounttree.c
+++ b/fs/ocfs2/refcounttree.c
@@ -2931,6 +2931,12 @@
offset = ((loff_t)cpos) << OCFS2_SB(sb)->s_clustersize_bits;
end = offset + (new_len << OCFS2_SB(sb)->s_clustersize_bits);
+ /*
+ * We only duplicate pages until we reach the page contains i_size - 1.
+ * So trim 'end' to i_size.
+ */
+ if (end > i_size_read(context->inode))
+ end = i_size_read(context->inode);
while (offset < end) {
page_index = offset >> PAGE_CACHE_SHIFT;
@@ -4166,6 +4172,12 @@
struct inode *inode = old_dentry->d_inode;
struct buffer_head *new_bh = NULL;
+ if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_SYSTEM_FILE) {
+ ret = -EINVAL;
+ mlog_errno(ret);
+ goto out;
+ }
+
ret = filemap_fdatawrite(inode->i_mapping);
if (ret) {
mlog_errno(ret);
diff --git a/fs/ocfs2/reservations.c b/fs/ocfs2/reservations.c
index 4065002..d8b6e42 100644
--- a/fs/ocfs2/reservations.c
+++ b/fs/ocfs2/reservations.c
@@ -26,7 +26,6 @@
#include <linux/fs.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/highmem.h>
#include <linux/bitops.h>
#include <linux/list.h>
diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c
index f4c2a9e..a8e6a95 100644
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -741,7 +741,7 @@
le16_to_cpu(bg->bg_free_bits_count));
le32_add_cpu(&cl->cl_recs[alloc_rec].c_total,
le16_to_cpu(bg->bg_bits));
- cl->cl_recs[alloc_rec].c_blkno = cpu_to_le64(bg->bg_blkno);
+ cl->cl_recs[alloc_rec].c_blkno = bg->bg_blkno;
if (le16_to_cpu(cl->cl_next_free_rec) < le16_to_cpu(cl->cl_count))
le16_add_cpu(&cl->cl_next_free_rec, 1);
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 2c26ce2..0eaa929 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -879,13 +879,15 @@
if (!OCFS2_HAS_RO_COMPAT_FEATURE(sb, feature[type]))
continue;
if (unsuspend)
- status = vfs_quota_enable(
- sb_dqopt(sb)->files[type],
- type, QFMT_OCFS2,
- DQUOT_SUSPENDED);
- else
- status = vfs_quota_disable(sb, type,
- DQUOT_SUSPENDED);
+ status = dquot_resume(sb, type);
+ else {
+ struct ocfs2_mem_dqinfo *oinfo;
+
+ /* Cancel periodic syncing before suspending */
+ oinfo = sb_dqinfo(sb, type)->dqi_priv;
+ cancel_delayed_work_sync(&oinfo->dqi_sync_work);
+ status = dquot_suspend(sb, type);
+ }
if (status < 0)
break;
}
@@ -916,8 +918,8 @@
status = -ENOENT;
goto out_quota_off;
}
- status = vfs_quota_enable(inode[type], type, QFMT_OCFS2,
- DQUOT_USAGE_ENABLED);
+ status = dquot_enable(inode[type], type, QFMT_OCFS2,
+ DQUOT_USAGE_ENABLED);
if (status < 0)
goto out_quota_off;
}
@@ -952,8 +954,8 @@
/* Turn off quotas. This will remove all dquot structures from
* memory and so they will be automatically synced to global
* quota files */
- vfs_quota_disable(sb, type, DQUOT_USAGE_ENABLED |
- DQUOT_LIMITS_ENABLED);
+ dquot_disable(sb, type, DQUOT_USAGE_ENABLED |
+ DQUOT_LIMITS_ENABLED);
if (!inode)
continue;
iput(inode);
@@ -962,7 +964,7 @@
/* Handle quota on quotactl */
static int ocfs2_quota_on(struct super_block *sb, int type, int format_id,
- char *path, int remount)
+ char *path)
{
unsigned int feature[MAXQUOTAS] = { OCFS2_FEATURE_RO_COMPAT_USRQUOTA,
OCFS2_FEATURE_RO_COMPAT_GRPQUOTA};
@@ -970,30 +972,24 @@
if (!OCFS2_HAS_RO_COMPAT_FEATURE(sb, feature[type]))
return -EINVAL;
- if (remount)
- return 0; /* Just ignore it has been handled in
- * ocfs2_remount() */
- return vfs_quota_enable(sb_dqopt(sb)->files[type], type,
- format_id, DQUOT_LIMITS_ENABLED);
+ return dquot_enable(sb_dqopt(sb)->files[type], type,
+ format_id, DQUOT_LIMITS_ENABLED);
}
/* Handle quota off quotactl */
-static int ocfs2_quota_off(struct super_block *sb, int type, int remount)
+static int ocfs2_quota_off(struct super_block *sb, int type)
{
- if (remount)
- return 0; /* Ignore now and handle later in
- * ocfs2_remount() */
- return vfs_quota_disable(sb, type, DQUOT_LIMITS_ENABLED);
+ return dquot_disable(sb, type, DQUOT_LIMITS_ENABLED);
}
static const struct quotactl_ops ocfs2_quotactl_ops = {
.quota_on = ocfs2_quota_on,
.quota_off = ocfs2_quota_off,
- .quota_sync = vfs_quota_sync,
- .get_info = vfs_get_dqinfo,
- .set_info = vfs_set_dqinfo,
- .get_dqblk = vfs_get_dqblk,
- .set_dqblk = vfs_set_dqblk,
+ .quota_sync = dquot_quota_sync,
+ .get_info = dquot_get_dqinfo,
+ .set_info = dquot_set_dqinfo,
+ .get_dqblk = dquot_get_dqblk,
+ .set_dqblk = dquot_set_dqblk,
};
static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index e97b348..d03469f 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -709,7 +709,7 @@
struct ocfs2_xattr_value_buf *vb,
struct ocfs2_xattr_set_ctxt *ctxt)
{
- int status = 0;
+ int status = 0, credits;
handle_t *handle = ctxt->handle;
enum ocfs2_alloc_restarted why;
u32 prev_clusters, logical_start = le32_to_cpu(vb->vb_xv->xr_clusters);
@@ -719,39 +719,55 @@
ocfs2_init_xattr_value_extent_tree(&et, INODE_CACHE(inode), vb);
- status = vb->vb_access(handle, INODE_CACHE(inode), vb->vb_bh,
- OCFS2_JOURNAL_ACCESS_WRITE);
- if (status < 0) {
- mlog_errno(status);
- goto leave;
+ while (clusters_to_add) {
+ status = vb->vb_access(handle, INODE_CACHE(inode), vb->vb_bh,
+ OCFS2_JOURNAL_ACCESS_WRITE);
+ if (status < 0) {
+ mlog_errno(status);
+ break;
+ }
+
+ prev_clusters = le32_to_cpu(vb->vb_xv->xr_clusters);
+ status = ocfs2_add_clusters_in_btree(handle,
+ &et,
+ &logical_start,
+ clusters_to_add,
+ 0,
+ ctxt->data_ac,
+ ctxt->meta_ac,
+ &why);
+ if ((status < 0) && (status != -EAGAIN)) {
+ if (status != -ENOSPC)
+ mlog_errno(status);
+ break;
+ }
+
+ ocfs2_journal_dirty(handle, vb->vb_bh);
+
+ clusters_to_add -= le32_to_cpu(vb->vb_xv->xr_clusters) -
+ prev_clusters;
+
+ if (why != RESTART_NONE && clusters_to_add) {
+ /*
+ * We can only fail in case the alloc file doesn't give
+ * up enough clusters.
+ */
+ BUG_ON(why == RESTART_META);
+
+ mlog(0, "restarting xattr value extension for %u"
+ " clusters,.\n", clusters_to_add);
+ credits = ocfs2_calc_extend_credits(inode->i_sb,
+ &vb->vb_xv->xr_list,
+ clusters_to_add);
+ status = ocfs2_extend_trans(handle, credits);
+ if (status < 0) {
+ status = -ENOMEM;
+ mlog_errno(status);
+ break;
+ }
+ }
}
- prev_clusters = le32_to_cpu(vb->vb_xv->xr_clusters);
- status = ocfs2_add_clusters_in_btree(handle,
- &et,
- &logical_start,
- clusters_to_add,
- 0,
- ctxt->data_ac,
- ctxt->meta_ac,
- &why);
- if (status < 0) {
- mlog_errno(status);
- goto leave;
- }
-
- ocfs2_journal_dirty(handle, vb->vb_bh);
-
- clusters_to_add -= le32_to_cpu(vb->vb_xv->xr_clusters) - prev_clusters;
-
- /*
- * We should have already allocated enough space before the transaction,
- * so no need to restart.
- */
- BUG_ON(why != RESTART_NONE || clusters_to_add);
-
-leave:
-
return status;
}
@@ -6788,16 +6804,15 @@
return ret;
}
-static int ocfs2_reflink_xattr_buckets(handle_t *handle,
+static int ocfs2_reflink_xattr_bucket(handle_t *handle,
u64 blkno, u64 new_blkno, u32 clusters,
+ u32 *cpos, int num_buckets,
struct ocfs2_alloc_context *meta_ac,
struct ocfs2_alloc_context *data_ac,
struct ocfs2_reflink_xattr_tree_args *args)
{
int i, j, ret = 0;
struct super_block *sb = args->reflink->old_inode->i_sb;
- u32 bpc = ocfs2_xattr_buckets_per_cluster(OCFS2_SB(sb));
- u32 num_buckets = clusters * bpc;
int bpb = args->old_bucket->bu_blocks;
struct ocfs2_xattr_value_buf vb = {
.vb_access = ocfs2_journal_access,
@@ -6816,14 +6831,6 @@
break;
}
- /*
- * The real bucket num in this series of blocks is stored
- * in the 1st bucket.
- */
- if (i == 0)
- num_buckets = le16_to_cpu(
- bucket_xh(args->old_bucket)->xh_num_buckets);
-
ret = ocfs2_xattr_bucket_journal_access(handle,
args->new_bucket,
OCFS2_JOURNAL_ACCESS_CREATE);
@@ -6837,6 +6844,18 @@
bucket_block(args->old_bucket, j),
sb->s_blocksize);
+ /*
+ * Record the start cpos so that we can use it to initialize
+ * our xattr tree we also set the xh_num_bucket for the new
+ * bucket.
+ */
+ if (i == 0) {
+ *cpos = le32_to_cpu(bucket_xh(args->new_bucket)->
+ xh_entries[0].xe_name_hash);
+ bucket_xh(args->new_bucket)->xh_num_buckets =
+ cpu_to_le16(num_buckets);
+ }
+
ocfs2_xattr_bucket_journal_dirty(handle, args->new_bucket);
ret = ocfs2_reflink_xattr_header(handle, args->reflink,
@@ -6866,6 +6885,7 @@
}
ocfs2_xattr_bucket_journal_dirty(handle, args->new_bucket);
+
ocfs2_xattr_bucket_relse(args->old_bucket);
ocfs2_xattr_bucket_relse(args->new_bucket);
}
@@ -6874,6 +6894,75 @@
ocfs2_xattr_bucket_relse(args->new_bucket);
return ret;
}
+
+static int ocfs2_reflink_xattr_buckets(handle_t *handle,
+ struct inode *inode,
+ struct ocfs2_reflink_xattr_tree_args *args,
+ struct ocfs2_extent_tree *et,
+ struct ocfs2_alloc_context *meta_ac,
+ struct ocfs2_alloc_context *data_ac,
+ u64 blkno, u32 cpos, u32 len)
+{
+ int ret, first_inserted = 0;
+ u32 p_cluster, num_clusters, reflink_cpos = 0;
+ u64 new_blkno;
+ unsigned int num_buckets, reflink_buckets;
+ unsigned int bpc =
+ ocfs2_xattr_buckets_per_cluster(OCFS2_SB(inode->i_sb));
+
+ ret = ocfs2_read_xattr_bucket(args->old_bucket, blkno);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
+ num_buckets = le16_to_cpu(bucket_xh(args->old_bucket)->xh_num_buckets);
+ ocfs2_xattr_bucket_relse(args->old_bucket);
+
+ while (len && num_buckets) {
+ ret = ocfs2_claim_clusters(handle, data_ac,
+ 1, &p_cluster, &num_clusters);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
+
+ new_blkno = ocfs2_clusters_to_blocks(inode->i_sb, p_cluster);
+ reflink_buckets = min(num_buckets, bpc * num_clusters);
+
+ ret = ocfs2_reflink_xattr_bucket(handle, blkno,
+ new_blkno, num_clusters,
+ &reflink_cpos, reflink_buckets,
+ meta_ac, data_ac, args);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
+
+ /*
+ * For the 1st allocated cluster, we make it use the same cpos
+ * so that the xattr tree looks the same as the original one
+ * in the most case.
+ */
+ if (!first_inserted) {
+ reflink_cpos = cpos;
+ first_inserted = 1;
+ }
+ ret = ocfs2_insert_extent(handle, et, reflink_cpos, new_blkno,
+ num_clusters, 0, meta_ac);
+ if (ret)
+ mlog_errno(ret);
+
+ mlog(0, "insert new xattr extent rec start %llu len %u to %u\n",
+ (unsigned long long)new_blkno, num_clusters, reflink_cpos);
+
+ len -= num_clusters;
+ blkno += ocfs2_clusters_to_blocks(inode->i_sb, num_clusters);
+ num_buckets -= reflink_buckets;
+ }
+out:
+ return ret;
+}
+
/*
* Create the same xattr extent record in the new inode's xattr tree.
*/
@@ -6885,8 +6974,6 @@
void *para)
{
int ret, credits = 0;
- u32 p_cluster, num_clusters;
- u64 new_blkno;
handle_t *handle;
struct ocfs2_reflink_xattr_tree_args *args =
(struct ocfs2_reflink_xattr_tree_args *)para;
@@ -6895,6 +6982,9 @@
struct ocfs2_alloc_context *data_ac = NULL;
struct ocfs2_extent_tree et;
+ mlog(0, "reflink xattr buckets %llu len %u\n",
+ (unsigned long long)blkno, len);
+
ocfs2_init_xattr_tree_extent_tree(&et,
INODE_CACHE(args->reflink->new_inode),
args->new_blk_bh);
@@ -6914,32 +7004,12 @@
goto out;
}
- ret = ocfs2_claim_clusters(handle, data_ac,
- len, &p_cluster, &num_clusters);
- if (ret) {
- mlog_errno(ret);
- goto out_commit;
- }
-
- new_blkno = ocfs2_clusters_to_blocks(osb->sb, p_cluster);
-
- mlog(0, "reflink xattr buckets %llu to %llu, len %u\n",
- (unsigned long long)blkno, (unsigned long long)new_blkno, len);
- ret = ocfs2_reflink_xattr_buckets(handle, blkno, new_blkno, len,
- meta_ac, data_ac, args);
- if (ret) {
- mlog_errno(ret);
- goto out_commit;
- }
-
- mlog(0, "insert new xattr extent rec start %llu len %u to %u\n",
- (unsigned long long)new_blkno, len, cpos);
- ret = ocfs2_insert_extent(handle, &et, cpos, new_blkno,
- len, 0, meta_ac);
+ ret = ocfs2_reflink_xattr_buckets(handle, inode, args, &et,
+ meta_ac, data_ac,
+ blkno, cpos, len);
if (ret)
mlog_errno(ret);
-out_commit:
ocfs2_commit_trans(osb, handle);
out:
diff --git a/fs/omfs/file.c b/fs/omfs/file.c
index 399487c..6e7a329 100644
--- a/fs/omfs/file.c
+++ b/fs/omfs/file.c
@@ -329,7 +329,7 @@
.aio_read = generic_file_aio_read,
.aio_write = generic_file_aio_write,
.mmap = generic_file_mmap,
- .fsync = simple_fsync,
+ .fsync = generic_file_fsync,
.splice_read = generic_file_splice_read,
};
diff --git a/fs/partitions/ibm.c b/fs/partitions/ibm.c
index 3e73de5..fc84976 100644
--- a/fs/partitions/ibm.c
+++ b/fs/partitions/ibm.c
@@ -74,6 +74,7 @@
} *label;
unsigned char *data;
Sector sect;
+ sector_t labelsect;
res = 0;
blocksize = bdev_logical_block_size(bdev);
@@ -98,10 +99,19 @@
goto out_freeall;
/*
+ * Special case for FBA disks: label sector does not depend on
+ * blocksize.
+ */
+ if ((info->cu_type == 0x6310 && info->dev_type == 0x9336) ||
+ (info->cu_type == 0x3880 && info->dev_type == 0x3370))
+ labelsect = info->label_block;
+ else
+ labelsect = info->label_block * (blocksize >> 9);
+
+ /*
* Get volume label, extract name and type.
*/
- data = read_part_sector(state, info->label_block*(blocksize/512),
- §);
+ data = read_part_sector(state, labelsect, §);
if (data == NULL)
goto out_readerr;
diff --git a/fs/pipe.c b/fs/pipe.c
index d79872e..279eef9 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -26,9 +26,14 @@
/*
* The max size that a non-root user is allowed to grow the pipe. Can
- * be set by root in /proc/sys/fs/pipe-max-pages
+ * be set by root in /proc/sys/fs/pipe-max-size
*/
-unsigned int pipe_max_pages = PIPE_DEF_BUFFERS * 16;
+unsigned int pipe_max_size = 1048576;
+
+/*
+ * Minimum pipe size, as required by POSIX
+ */
+unsigned int pipe_min_size = PAGE_SIZE;
/*
* We use a start+len construction, which provides full use of the
@@ -230,6 +235,7 @@
return kmap(buf->page);
}
+EXPORT_SYMBOL(generic_pipe_buf_map);
/**
* generic_pipe_buf_unmap - unmap a previously mapped pipe buffer
@@ -249,6 +255,7 @@
} else
kunmap(buf->page);
}
+EXPORT_SYMBOL(generic_pipe_buf_unmap);
/**
* generic_pipe_buf_steal - attempt to take ownership of a &pipe_buffer
@@ -279,6 +286,7 @@
return 1;
}
+EXPORT_SYMBOL(generic_pipe_buf_steal);
/**
* generic_pipe_buf_get - get a reference to a &struct pipe_buffer
@@ -294,6 +302,7 @@
{
page_cache_get(buf->page);
}
+EXPORT_SYMBOL(generic_pipe_buf_get);
/**
* generic_pipe_buf_confirm - verify contents of the pipe buffer
@@ -309,6 +318,7 @@
{
return 0;
}
+EXPORT_SYMBOL(generic_pipe_buf_confirm);
/**
* generic_pipe_buf_release - put a reference to a &struct pipe_buffer
@@ -323,6 +333,7 @@
{
page_cache_release(buf->page);
}
+EXPORT_SYMBOL(generic_pipe_buf_release);
static const struct pipe_buf_operations anon_pipe_buf_ops = {
.can_merge = 1,
@@ -1112,26 +1123,20 @@
* Allocate a new array of pipe buffers and copy the info over. Returns the
* pipe size if successful, or return -ERROR on error.
*/
-static long pipe_set_size(struct pipe_inode_info *pipe, unsigned long arg)
+static long pipe_set_size(struct pipe_inode_info *pipe, unsigned long nr_pages)
{
struct pipe_buffer *bufs;
/*
- * Must be a power-of-2 currently
- */
- if (!is_power_of_2(arg))
- return -EINVAL;
-
- /*
* We can shrink the pipe, if arg >= pipe->nrbufs. Since we don't
* expect a lot of shrink+grow operations, just free and allocate
* again like we would do for growing. If the pipe currently
* contains more buffers than arg, then return busy.
*/
- if (arg < pipe->nrbufs)
+ if (nr_pages < pipe->nrbufs)
return -EBUSY;
- bufs = kcalloc(arg, sizeof(struct pipe_buffer), GFP_KERNEL);
+ bufs = kcalloc(nr_pages, sizeof(struct pipe_buffer), GFP_KERNEL);
if (unlikely(!bufs))
return -ENOMEM;
@@ -1140,20 +1145,56 @@
* and adjust the indexes.
*/
if (pipe->nrbufs) {
- const unsigned int tail = pipe->nrbufs & (pipe->buffers - 1);
- const unsigned int head = pipe->nrbufs - tail;
+ unsigned int tail;
+ unsigned int head;
+ tail = pipe->curbuf + pipe->nrbufs;
+ if (tail < pipe->buffers)
+ tail = 0;
+ else
+ tail &= (pipe->buffers - 1);
+
+ head = pipe->nrbufs - tail;
if (head)
memcpy(bufs, pipe->bufs + pipe->curbuf, head * sizeof(struct pipe_buffer));
if (tail)
- memcpy(bufs + head, pipe->bufs + pipe->curbuf, tail * sizeof(struct pipe_buffer));
+ memcpy(bufs + head, pipe->bufs, tail * sizeof(struct pipe_buffer));
}
pipe->curbuf = 0;
kfree(pipe->bufs);
pipe->bufs = bufs;
- pipe->buffers = arg;
- return arg;
+ pipe->buffers = nr_pages;
+ return nr_pages * PAGE_SIZE;
+}
+
+/*
+ * Currently we rely on the pipe array holding a power-of-2 number
+ * of pages.
+ */
+static inline unsigned int round_pipe_size(unsigned int size)
+{
+ unsigned long nr_pages;
+
+ nr_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
+ return roundup_pow_of_two(nr_pages) << PAGE_SHIFT;
+}
+
+/*
+ * This should work even if CONFIG_PROC_FS isn't set, as proc_dointvec_minmax
+ * will return an error.
+ */
+int pipe_proc_fn(struct ctl_table *table, int write, void __user *buf,
+ size_t *lenp, loff_t *ppos)
+{
+ int ret;
+
+ ret = proc_dointvec_minmax(table, write, buf, lenp, ppos);
+ if (ret < 0 || !write)
+ return ret;
+
+ pipe_max_size = round_pipe_size(pipe_max_size);
+ return ret;
}
long pipe_fcntl(struct file *file, unsigned int cmd, unsigned long arg)
@@ -1168,25 +1209,32 @@
mutex_lock(&pipe->inode->i_mutex);
switch (cmd) {
- case F_SETPIPE_SZ:
- if (!capable(CAP_SYS_ADMIN) && arg > pipe_max_pages)
- return -EINVAL;
- /*
- * The pipe needs to be at least 2 pages large to
- * guarantee POSIX behaviour.
- */
- if (arg < 2)
- return -EINVAL;
- ret = pipe_set_size(pipe, arg);
+ case F_SETPIPE_SZ: {
+ unsigned int size, nr_pages;
+
+ size = round_pipe_size(arg);
+ nr_pages = size >> PAGE_SHIFT;
+
+ ret = -EINVAL;
+ if (!nr_pages)
+ goto out;
+
+ if (!capable(CAP_SYS_RESOURCE) && size > pipe_max_size) {
+ ret = -EPERM;
+ goto out;
+ }
+ ret = pipe_set_size(pipe, nr_pages);
break;
+ }
case F_GETPIPE_SZ:
- ret = pipe->buffers;
+ ret = pipe->buffers * PAGE_SIZE;
break;
default:
ret = -EINVAL;
break;
}
+out:
mutex_unlock(&pipe->inode->i_mutex);
return ret;
}
diff --git a/fs/proc/array.c b/fs/proc/array.c
index 885ab55..9b58d38 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -267,7 +267,7 @@
shpending = p->signal->shared_pending.signal;
blocked = p->blocked;
collect_sigign_sigcatch(p, &ignored, &caught);
- num_threads = atomic_read(&p->signal->count);
+ num_threads = get_nr_threads(p);
rcu_read_lock(); /* FIXME: is this correct? */
qsize = atomic_read(&__task_cred(p)->user->sigpending);
rcu_read_unlock();
@@ -410,7 +410,7 @@
tty_nr = new_encode_dev(tty_devnum(sig->tty));
}
- num_threads = atomic_read(&sig->count);
+ num_threads = get_nr_threads(task);
collect_sigign_sigcatch(task, &sigign, &sigcatch);
cmin_flt = sig->cmin_flt;
diff --git a/fs/proc/base.c b/fs/proc/base.c
index c7f9f23..acb7ef8 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -166,18 +166,6 @@
return result;
}
-static int get_nr_threads(struct task_struct *tsk)
-{
- unsigned long flags;
- int count = 0;
-
- if (lock_task_sighand(tsk, &flags)) {
- count = atomic_read(&tsk->signal->count);
- unlock_task_sighand(tsk, &flags);
- }
- return count;
-}
-
static int proc_cwd_link(struct inode *inode, struct path *path)
{
struct task_struct *task = get_proc_task(inode);
@@ -2444,7 +2432,7 @@
const struct pid_entry *p = ptr;
struct inode *inode;
struct proc_inode *ei;
- struct dentry *error = ERR_PTR(-EINVAL);
+ struct dentry *error;
/* Allocate the inode */
error = ERR_PTR(-ENOMEM);
@@ -2794,7 +2782,7 @@
struct dentry *proc_pid_lookup(struct inode *dir, struct dentry * dentry, struct nameidata *nd)
{
- struct dentry *result = ERR_PTR(-ENOENT);
+ struct dentry *result;
struct task_struct *task;
unsigned tgid;
struct pid_namespace *ns;
diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index 43c1274..2791907 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -343,21 +343,6 @@
/*
* Return an inode number between PROC_DYNAMIC_FIRST and
* 0xffffffff, or zero on failure.
- *
- * Current inode allocations in the proc-fs (hex-numbers):
- *
- * 00000000 reserved
- * 00000001-00000fff static entries (goners)
- * 001 root-ino
- *
- * 00001000-00001fff unused
- * 0001xxxx-7fffxxxx pid-dir entries for pid 1-7fff
- * 80000000-efffffff unused
- * f0000000-ffffffff dynamic entries
- *
- * Goal:
- * Once we split the thing into several virtual filesystems,
- * we will get rid of magical ranges (and this comment, BTW).
*/
static unsigned int get_inode_number(void)
{
diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c
index c837a77..6f37c39 100644
--- a/fs/proc/kcore.c
+++ b/fs/proc/kcore.c
@@ -588,7 +588,7 @@
*/
static void __init proc_kcore_text_init(void)
{
- kclist_add(&kcore_text, _stext, _end - _stext, KCORE_TEXT);
+ kclist_add(&kcore_text, _text, _end - _text, KCORE_TEXT);
}
#else
static void __init proc_kcore_text_init(void)
diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c
index ce94801..d9396a4 100644
--- a/fs/proc/proc_devtree.c
+++ b/fs/proc/proc_devtree.c
@@ -209,6 +209,9 @@
for (pp = np->properties; pp != NULL; pp = pp->next) {
p = pp->name;
+ if (strchr(p, '/'))
+ continue;
+
if (duplicate_name(de, p))
p = fixup_name(np, de, p);
diff --git a/fs/proc/root.c b/fs/proc/root.c
index 757c069..4258384 100644
--- a/fs/proc/root.c
+++ b/fs/proc/root.c
@@ -110,7 +110,6 @@
if (err)
return;
proc_mnt = kern_mount_data(&proc_fs_type, &init_pid_ns);
- err = PTR_ERR(proc_mnt);
if (IS_ERR(proc_mnt)) {
unregister_filesystem(&proc_fs_type);
return;
diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c
index 46d4b5d..cb6306e 100644
--- a/fs/proc/task_nommu.c
+++ b/fs/proc/task_nommu.c
@@ -122,11 +122,20 @@
return size;
}
+static void pad_len_spaces(struct seq_file *m, int len)
+{
+ len = 25 + sizeof(void*) * 6 - len;
+ if (len < 1)
+ len = 1;
+ seq_printf(m, "%*c", len, ' ');
+}
+
/*
* display a single VMA to a sequenced file
*/
static int nommu_vma_show(struct seq_file *m, struct vm_area_struct *vma)
{
+ struct mm_struct *mm = vma->vm_mm;
unsigned long ino = 0;
struct file *file;
dev_t dev = 0;
@@ -155,11 +164,14 @@
MAJOR(dev), MINOR(dev), ino, &len);
if (file) {
- len = 25 + sizeof(void *) * 6 - len;
- if (len < 1)
- len = 1;
- seq_printf(m, "%*c", len, ' ');
+ pad_len_spaces(m, len);
seq_path(m, &file->f_path, "");
+ } else if (mm) {
+ if (vma->vm_start <= mm->start_stack &&
+ vma->vm_end >= mm->start_stack) {
+ pad_len_spaces(m, len);
+ seq_puts(m, "[stack]");
+ }
}
seq_putc(m, '\n');
diff --git a/fs/qnx4/dir.c b/fs/qnx4/dir.c
index 6f30c3d..6e8fc62 100644
--- a/fs/qnx4/dir.c
+++ b/fs/qnx4/dir.c
@@ -77,9 +77,10 @@
const struct file_operations qnx4_dir_operations =
{
+ .llseek = generic_file_llseek,
.read = generic_read_dir,
.readdir = qnx4_readdir,
- .fsync = simple_fsync,
+ .fsync = generic_file_fsync,
};
const struct inode_operations qnx4_dir_inode_operations =
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 655a4c5..437d2ca 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -228,10 +228,6 @@
struct dqstats dqstats;
EXPORT_SYMBOL(dqstats);
-#ifdef CONFIG_SMP
-struct dqstats *dqstats_pcpu;
-EXPORT_SYMBOL(dqstats_pcpu);
-#endif
static qsize_t inode_get_rsv_space(struct inode *inode);
static void __dquot_initialize(struct inode *inode, int type);
@@ -584,7 +580,7 @@
}
EXPORT_SYMBOL(dquot_scan_active);
-int vfs_quota_sync(struct super_block *sb, int type, int wait)
+int dquot_quota_sync(struct super_block *sb, int type, int wait)
{
struct list_head *dirty;
struct dquot *dquot;
@@ -656,7 +652,7 @@
return 0;
}
-EXPORT_SYMBOL(vfs_quota_sync);
+EXPORT_SYMBOL(dquot_quota_sync);
/* Free unused dquots from cache */
static void prune_dqcache(int count)
@@ -676,35 +672,20 @@
}
}
-static int dqstats_read(unsigned int type)
-{
- int count = 0;
-#ifdef CONFIG_SMP
- int cpu;
- for_each_possible_cpu(cpu)
- count += per_cpu_ptr(dqstats_pcpu, cpu)->stat[type];
- /* Statistics reading is racy, but absolute accuracy isn't required */
- if (count < 0)
- count = 0;
-#else
- count = dqstats.stat[type];
-#endif
- return count;
-}
-
/*
* This is called from kswapd when we think we need some
* more memory
*/
-
-static int shrink_dqcache_memory(int nr, gfp_t gfp_mask)
+static int shrink_dqcache_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
{
if (nr) {
spin_lock(&dq_list_lock);
prune_dqcache(nr);
spin_unlock(&dq_list_lock);
}
- return (dqstats_read(DQST_FREE_DQUOTS)/100) * sysctl_vfs_cache_pressure;
+ return ((unsigned)
+ percpu_counter_read_positive(&dqstats.counter[DQST_FREE_DQUOTS])
+ /100) * sysctl_vfs_cache_pressure;
}
static struct shrinker dqcache_shrinker = {
@@ -1514,11 +1495,13 @@
/*
* This operation can block, but only after everything is updated
*/
-int __dquot_alloc_space(struct inode *inode, qsize_t number,
- int warn, int reserve)
+int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags)
{
int cnt, ret = 0;
char warntype[MAXQUOTAS];
+ int warn = flags & DQUOT_SPACE_WARN;
+ int reserve = flags & DQUOT_SPACE_RESERVE;
+ int nofail = flags & DQUOT_SPACE_NOFAIL;
/*
* First test before acquiring mutex - solves deadlocks when we
@@ -1539,7 +1522,7 @@
continue;
ret = check_bdq(inode->i_dquot[cnt], number, !warn,
warntype+cnt);
- if (ret) {
+ if (ret && !nofail) {
spin_unlock(&dq_data_lock);
goto out_flush_warn;
}
@@ -1638,10 +1621,11 @@
/*
* This operation can block, but only after everything is updated
*/
-void __dquot_free_space(struct inode *inode, qsize_t number, int reserve)
+void __dquot_free_space(struct inode *inode, qsize_t number, int flags)
{
unsigned int cnt;
char warntype[MAXQUOTAS];
+ int reserve = flags & DQUOT_SPACE_RESERVE;
/* First test before acquiring mutex - solves deadlocks when we
* re-enter the quota code and are already holding the mutex */
@@ -1812,7 +1796,7 @@
if (iattr->ia_valid & ATTR_UID && iattr->ia_uid != inode->i_uid)
transfer_to[USRQUOTA] = dqget(sb, iattr->ia_uid, USRQUOTA);
if (iattr->ia_valid & ATTR_GID && iattr->ia_gid != inode->i_gid)
- transfer_to[GRPQUOTA] = dqget(sb, iattr->ia_uid, GRPQUOTA);
+ transfer_to[GRPQUOTA] = dqget(sb, iattr->ia_gid, GRPQUOTA);
ret = __dquot_transfer(inode, transfer_to);
dqput_all(transfer_to);
@@ -1847,6 +1831,7 @@
.alloc_dquot = dquot_alloc,
.destroy_dquot = dquot_destroy,
};
+EXPORT_SYMBOL(dquot_operations);
/*
* Generic helper for ->open on filesystems supporting disk quotas.
@@ -1865,7 +1850,7 @@
/*
* Turn quota off on a device. type == -1 ==> quotaoff for all types (umount)
*/
-int vfs_quota_disable(struct super_block *sb, int type, unsigned int flags)
+int dquot_disable(struct super_block *sb, int type, unsigned int flags)
{
int cnt, ret = 0;
struct quota_info *dqopt = sb_dqopt(sb);
@@ -1995,14 +1980,15 @@
}
return ret;
}
-EXPORT_SYMBOL(vfs_quota_disable);
+EXPORT_SYMBOL(dquot_disable);
-int vfs_quota_off(struct super_block *sb, int type, int remount)
+int dquot_quota_off(struct super_block *sb, int type)
{
- return vfs_quota_disable(sb, type, remount ? DQUOT_SUSPENDED :
- (DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED));
+ return dquot_disable(sb, type,
+ DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED);
}
-EXPORT_SYMBOL(vfs_quota_off);
+EXPORT_SYMBOL(dquot_quota_off);
+
/*
* Turn quotas on on a device
*/
@@ -2120,36 +2106,43 @@
}
/* Reenable quotas on remount RW */
-static int vfs_quota_on_remount(struct super_block *sb, int type)
+int dquot_resume(struct super_block *sb, int type)
{
struct quota_info *dqopt = sb_dqopt(sb);
struct inode *inode;
- int ret;
+ int ret = 0, cnt;
unsigned int flags;
- mutex_lock(&dqopt->dqonoff_mutex);
- if (!sb_has_quota_suspended(sb, type)) {
- mutex_unlock(&dqopt->dqonoff_mutex);
- return 0;
- }
- inode = dqopt->files[type];
- dqopt->files[type] = NULL;
- spin_lock(&dq_state_lock);
- flags = dqopt->flags & dquot_state_flag(DQUOT_USAGE_ENABLED |
- DQUOT_LIMITS_ENABLED, type);
- dqopt->flags &= ~dquot_state_flag(DQUOT_STATE_FLAGS, type);
- spin_unlock(&dq_state_lock);
- mutex_unlock(&dqopt->dqonoff_mutex);
+ for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
+ if (type != -1 && cnt != type)
+ continue;
- flags = dquot_generic_flag(flags, type);
- ret = vfs_load_quota_inode(inode, type, dqopt->info[type].dqi_fmt_id,
- flags);
- iput(inode);
+ mutex_lock(&dqopt->dqonoff_mutex);
+ if (!sb_has_quota_suspended(sb, cnt)) {
+ mutex_unlock(&dqopt->dqonoff_mutex);
+ continue;
+ }
+ inode = dqopt->files[cnt];
+ dqopt->files[cnt] = NULL;
+ spin_lock(&dq_state_lock);
+ flags = dqopt->flags & dquot_state_flag(DQUOT_USAGE_ENABLED |
+ DQUOT_LIMITS_ENABLED,
+ cnt);
+ dqopt->flags &= ~dquot_state_flag(DQUOT_STATE_FLAGS, cnt);
+ spin_unlock(&dq_state_lock);
+ mutex_unlock(&dqopt->dqonoff_mutex);
+
+ flags = dquot_generic_flag(flags, cnt);
+ ret = vfs_load_quota_inode(inode, cnt,
+ dqopt->info[cnt].dqi_fmt_id, flags);
+ iput(inode);
+ }
return ret;
}
+EXPORT_SYMBOL(dquot_resume);
-int vfs_quota_on_path(struct super_block *sb, int type, int format_id,
+int dquot_quota_on_path(struct super_block *sb, int type, int format_id,
struct path *path)
{
int error = security_quota_on(path->dentry);
@@ -2164,40 +2157,36 @@
DQUOT_LIMITS_ENABLED);
return error;
}
-EXPORT_SYMBOL(vfs_quota_on_path);
+EXPORT_SYMBOL(dquot_quota_on_path);
-int vfs_quota_on(struct super_block *sb, int type, int format_id, char *name,
- int remount)
+int dquot_quota_on(struct super_block *sb, int type, int format_id, char *name)
{
struct path path;
int error;
- if (remount)
- return vfs_quota_on_remount(sb, type);
-
error = kern_path(name, LOOKUP_FOLLOW, &path);
if (!error) {
- error = vfs_quota_on_path(sb, type, format_id, &path);
+ error = dquot_quota_on_path(sb, type, format_id, &path);
path_put(&path);
}
return error;
}
-EXPORT_SYMBOL(vfs_quota_on);
+EXPORT_SYMBOL(dquot_quota_on);
/*
* More powerful function for turning on quotas allowing setting
* of individual quota flags
*/
-int vfs_quota_enable(struct inode *inode, int type, int format_id,
- unsigned int flags)
+int dquot_enable(struct inode *inode, int type, int format_id,
+ unsigned int flags)
{
int ret = 0;
struct super_block *sb = inode->i_sb;
struct quota_info *dqopt = sb_dqopt(sb);
/* Just unsuspend quotas? */
- if (flags & DQUOT_SUSPENDED)
- return vfs_quota_on_remount(sb, type);
+ BUG_ON(flags & DQUOT_SUSPENDED);
+
if (!flags)
return 0;
/* Just updating flags needed? */
@@ -2229,13 +2218,13 @@
load_quota:
return vfs_load_quota_inode(inode, type, format_id, flags);
}
-EXPORT_SYMBOL(vfs_quota_enable);
+EXPORT_SYMBOL(dquot_enable);
/*
* This function is used when filesystem needs to initialize quotas
* during mount time.
*/
-int vfs_quota_on_mount(struct super_block *sb, char *qf_name,
+int dquot_quota_on_mount(struct super_block *sb, char *qf_name,
int format_id, int type)
{
struct dentry *dentry;
@@ -2261,24 +2250,7 @@
dput(dentry);
return error;
}
-EXPORT_SYMBOL(vfs_quota_on_mount);
-
-/* Wrapper to turn on quotas when remounting rw */
-int vfs_dq_quota_on_remount(struct super_block *sb)
-{
- int cnt;
- int ret = 0, err;
-
- if (!sb->s_qcop || !sb->s_qcop->quota_on)
- return -ENOSYS;
- for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
- err = sb->s_qcop->quota_on(sb, cnt, 0, NULL, 1);
- if (err < 0 && !ret)
- ret = err;
- }
- return ret;
-}
-EXPORT_SYMBOL(vfs_dq_quota_on_remount);
+EXPORT_SYMBOL(dquot_quota_on_mount);
static inline qsize_t qbtos(qsize_t blocks)
{
@@ -2313,8 +2285,8 @@
spin_unlock(&dq_data_lock);
}
-int vfs_get_dqblk(struct super_block *sb, int type, qid_t id,
- struct fs_disk_quota *di)
+int dquot_get_dqblk(struct super_block *sb, int type, qid_t id,
+ struct fs_disk_quota *di)
{
struct dquot *dquot;
@@ -2326,7 +2298,7 @@
return 0;
}
-EXPORT_SYMBOL(vfs_get_dqblk);
+EXPORT_SYMBOL(dquot_get_dqblk);
#define VFS_FS_DQ_MASK \
(FS_DQ_BCOUNT | FS_DQ_BSOFT | FS_DQ_BHARD | \
@@ -2425,7 +2397,7 @@
return 0;
}
-int vfs_set_dqblk(struct super_block *sb, int type, qid_t id,
+int dquot_set_dqblk(struct super_block *sb, int type, qid_t id,
struct fs_disk_quota *di)
{
struct dquot *dquot;
@@ -2441,10 +2413,10 @@
out:
return rc;
}
-EXPORT_SYMBOL(vfs_set_dqblk);
+EXPORT_SYMBOL(dquot_set_dqblk);
/* Generic routine for getting common part of quota file information */
-int vfs_get_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii)
+int dquot_get_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii)
{
struct mem_dqinfo *mi;
@@ -2463,10 +2435,10 @@
mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex);
return 0;
}
-EXPORT_SYMBOL(vfs_get_dqinfo);
+EXPORT_SYMBOL(dquot_get_dqinfo);
/* Generic routine for setting common part of quota file information */
-int vfs_set_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii)
+int dquot_set_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii)
{
struct mem_dqinfo *mi;
int err = 0;
@@ -2493,27 +2465,27 @@
mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex);
return err;
}
-EXPORT_SYMBOL(vfs_set_dqinfo);
+EXPORT_SYMBOL(dquot_set_dqinfo);
-const struct quotactl_ops vfs_quotactl_ops = {
- .quota_on = vfs_quota_on,
- .quota_off = vfs_quota_off,
- .quota_sync = vfs_quota_sync,
- .get_info = vfs_get_dqinfo,
- .set_info = vfs_set_dqinfo,
- .get_dqblk = vfs_get_dqblk,
- .set_dqblk = vfs_set_dqblk
+const struct quotactl_ops dquot_quotactl_ops = {
+ .quota_on = dquot_quota_on,
+ .quota_off = dquot_quota_off,
+ .quota_sync = dquot_quota_sync,
+ .get_info = dquot_get_dqinfo,
+ .set_info = dquot_set_dqinfo,
+ .get_dqblk = dquot_get_dqblk,
+ .set_dqblk = dquot_set_dqblk
};
-
+EXPORT_SYMBOL(dquot_quotactl_ops);
static int do_proc_dqstats(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
-#ifdef CONFIG_SMP
- /* Update global table */
unsigned int type = (int *)table->data - dqstats.stat;
- dqstats.stat[type] = dqstats_read(type);
-#endif
+
+ /* Update global table */
+ dqstats.stat[type] =
+ percpu_counter_sum_positive(&dqstats.counter[type]);
return proc_dointvec(table, write, buffer, lenp, ppos);
}
@@ -2606,7 +2578,7 @@
static int __init dquot_init(void)
{
- int i;
+ int i, ret;
unsigned long nr_hash, order;
printk(KERN_NOTICE "VFS: Disk quotas %s\n", __DQUOT_VERSION__);
@@ -2624,12 +2596,11 @@
if (!dquot_hash)
panic("Cannot create dquot hash table");
-#ifdef CONFIG_SMP
- dqstats_pcpu = alloc_percpu(struct dqstats);
- if (!dqstats_pcpu)
- panic("Cannot create dquot stats table");
-#endif
- memset(&dqstats, 0, sizeof(struct dqstats));
+ for (i = 0; i < _DQST_DQSTAT_LAST; i++) {
+ ret = percpu_counter_init(&dqstats.counter[i], 0);
+ if (ret)
+ panic("Cannot create dquot stat counters");
+ }
/* Find power-of-two hlist_heads which can fit into allocation */
nr_hash = (1UL << order) * PAGE_SIZE / sizeof(struct hlist_head);
diff --git a/fs/quota/quota.c b/fs/quota/quota.c
index ce3dfd0..b299961 100644
--- a/fs/quota/quota.c
+++ b/fs/quota/quota.c
@@ -73,7 +73,7 @@
if (IS_ERR(pathname))
return PTR_ERR(pathname);
if (sb->s_qcop->quota_on)
- ret = sb->s_qcop->quota_on(sb, type, id, pathname, 0);
+ ret = sb->s_qcop->quota_on(sb, type, id, pathname);
putname(pathname);
return ret;
}
@@ -260,7 +260,7 @@
case Q_QUOTAOFF:
if (!sb->s_qcop->quota_off)
return -ENOSYS;
- return sb->s_qcop->quota_off(sb, type, 0);
+ return sb->s_qcop->quota_off(sb, type);
case Q_GETFMT:
return quota_getfmt(sb, type, addr);
case Q_GETINFO:
diff --git a/fs/ramfs/file-mmu.c b/fs/ramfs/file-mmu.c
index 78f613c..4884ac5 100644
--- a/fs/ramfs/file-mmu.c
+++ b/fs/ramfs/file-mmu.c
@@ -43,12 +43,13 @@
.write = do_sync_write,
.aio_write = generic_file_aio_write,
.mmap = generic_file_mmap,
- .fsync = simple_sync_file,
+ .fsync = noop_fsync,
.splice_read = generic_file_splice_read,
.splice_write = generic_file_splice_write,
.llseek = generic_file_llseek,
};
const struct inode_operations ramfs_file_inode_operations = {
+ .setattr = simple_setattr,
.getattr = simple_getattr,
};
diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c
index 5ea4ad8..d532c20 100644
--- a/fs/ramfs/file-nommu.c
+++ b/fs/ramfs/file-nommu.c
@@ -42,7 +42,7 @@
.aio_read = generic_file_aio_read,
.write = do_sync_write,
.aio_write = generic_file_aio_write,
- .fsync = simple_sync_file,
+ .fsync = noop_fsync,
.splice_read = generic_file_splice_read,
.splice_write = generic_file_splice_write,
.llseek = generic_file_llseek,
@@ -146,7 +146,7 @@
return ret;
}
- ret = vmtruncate(inode, newsize);
+ ret = simple_setsize(inode, newsize);
return ret;
}
@@ -169,7 +169,8 @@
/* pick out size-changing events */
if (ia->ia_valid & ATTR_SIZE) {
- loff_t size = i_size_read(inode);
+ loff_t size = inode->i_size;
+
if (ia->ia_size != size) {
ret = ramfs_nommu_resize(inode, ia->ia_size, size);
if (ret < 0 || ia->ia_valid == ATTR_SIZE)
@@ -182,7 +183,7 @@
}
}
- ret = inode_setattr(inode, ia);
+ generic_setattr(inode, ia);
out:
ia->ia_valid = old_ia_valid;
return ret;
diff --git a/fs/read_write.c b/fs/read_write.c
index 113386d..9c04852 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -97,6 +97,23 @@
}
EXPORT_SYMBOL(generic_file_llseek);
+/**
+ * noop_llseek - No Operation Performed llseek implementation
+ * @file: file structure to seek on
+ * @offset: file offset to seek to
+ * @origin: type of seek
+ *
+ * This is an implementation of ->llseek useable for the rare special case when
+ * userspace expects the seek to succeed but the (device) file is actually not
+ * able to perform the seek. In this case you use noop_llseek() instead of
+ * falling back to the default implementation of ->llseek.
+ */
+loff_t noop_llseek(struct file *file, loff_t offset, int origin)
+{
+ return file->f_pos;
+}
+EXPORT_SYMBOL(noop_llseek);
+
loff_t no_llseek(struct file *file, loff_t offset, int origin)
{
return -ESPIPE;
diff --git a/fs/reiserfs/dir.c b/fs/reiserfs/dir.c
index 0793044..198dabf 100644
--- a/fs/reiserfs/dir.c
+++ b/fs/reiserfs/dir.c
@@ -14,10 +14,10 @@
extern const struct reiserfs_key MIN_KEY;
static int reiserfs_readdir(struct file *, void *, filldir_t);
-static int reiserfs_dir_fsync(struct file *filp, struct dentry *dentry,
- int datasync);
+static int reiserfs_dir_fsync(struct file *filp, int datasync);
const struct file_operations reiserfs_dir_operations = {
+ .llseek = generic_file_llseek,
.read = generic_read_dir,
.readdir = reiserfs_readdir,
.fsync = reiserfs_dir_fsync,
@@ -27,10 +27,9 @@
#endif
};
-static int reiserfs_dir_fsync(struct file *filp, struct dentry *dentry,
- int datasync)
+static int reiserfs_dir_fsync(struct file *filp, int datasync)
{
- struct inode *inode = dentry->d_inode;
+ struct inode *inode = filp->f_mapping->host;
int err;
reiserfs_write_lock(inode->i_sb);
err = reiserfs_commit_for_inode(inode);
diff --git a/fs/reiserfs/file.c b/fs/reiserfs/file.c
index 9977df9..b82cdd8 100644
--- a/fs/reiserfs/file.c
+++ b/fs/reiserfs/file.c
@@ -134,10 +134,9 @@
* be removed...
*/
-static int reiserfs_sync_file(struct file *filp,
- struct dentry *dentry, int datasync)
+static int reiserfs_sync_file(struct file *filp, int datasync)
{
- struct inode *inode = dentry->d_inode;
+ struct inode *inode = filp->f_mapping->host;
int err;
int barrier_done;
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 59125fb..9822fa1 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -158,6 +158,7 @@
#ifdef CONFIG_QUOTA
int i;
int ms_active_set;
+ int quota_enabled[MAXQUOTAS];
#endif
/* compose key to look for "save" links */
@@ -179,8 +180,15 @@
}
/* Turn on quotas so that they are updated correctly */
for (i = 0; i < MAXQUOTAS; i++) {
+ quota_enabled[i] = 1;
if (REISERFS_SB(s)->s_qf_names[i]) {
- int ret = reiserfs_quota_on_mount(s, i);
+ int ret;
+
+ if (sb_has_quota_active(s, i)) {
+ quota_enabled[i] = 0;
+ continue;
+ }
+ ret = reiserfs_quota_on_mount(s, i);
if (ret < 0)
reiserfs_warning(s, "reiserfs-2500",
"cannot turn on journaled "
@@ -304,8 +312,8 @@
#ifdef CONFIG_QUOTA
/* Turn quotas off */
for (i = 0; i < MAXQUOTAS; i++) {
- if (sb_dqopt(s)->files[i])
- vfs_quota_off(s, i, 0);
+ if (sb_dqopt(s)->files[i] && quota_enabled[i])
+ dquot_quota_off(s, i);
}
if (ms_active_set)
/* Restore the flag back */
@@ -466,6 +474,8 @@
struct reiserfs_transaction_handle th;
th.t_trans_id = 0;
+ dquot_disable(s, -1, DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED);
+
reiserfs_write_lock(s);
if (s->s_dirt)
@@ -620,7 +630,7 @@
static int reiserfs_release_dquot(struct dquot *);
static int reiserfs_mark_dquot_dirty(struct dquot *);
static int reiserfs_write_info(struct super_block *, int);
-static int reiserfs_quota_on(struct super_block *, int, int, char *, int);
+static int reiserfs_quota_on(struct super_block *, int, int, char *);
static const struct dquot_operations reiserfs_quota_operations = {
.write_dquot = reiserfs_write_dquot,
@@ -634,12 +644,12 @@
static const struct quotactl_ops reiserfs_qctl_operations = {
.quota_on = reiserfs_quota_on,
- .quota_off = vfs_quota_off,
- .quota_sync = vfs_quota_sync,
- .get_info = vfs_get_dqinfo,
- .set_info = vfs_set_dqinfo,
- .get_dqblk = vfs_get_dqblk,
- .set_dqblk = vfs_set_dqblk,
+ .quota_off = dquot_quota_off,
+ .quota_sync = dquot_quota_sync,
+ .get_info = dquot_get_dqinfo,
+ .set_info = dquot_set_dqinfo,
+ .get_dqblk = dquot_get_dqblk,
+ .set_dqblk = dquot_set_dqblk,
};
#endif
@@ -1242,6 +1252,11 @@
if (s->s_flags & MS_RDONLY)
/* it is read-only already */
goto out_ok;
+
+ err = dquot_suspend(s, -1);
+ if (err < 0)
+ goto out_err;
+
/* try to remount file system with read-only permissions */
if (sb_umount_state(rs) == REISERFS_VALID_FS
|| REISERFS_SB(s)->s_mount_state != REISERFS_VALID_FS) {
@@ -1295,6 +1310,7 @@
s->s_dirt = 0;
if (!(*mount_flags & MS_RDONLY)) {
+ dquot_resume(s, -1);
finish_unfinished(s);
reiserfs_xattr_init(s, *mount_flags);
}
@@ -2022,15 +2038,15 @@
*/
static int reiserfs_quota_on_mount(struct super_block *sb, int type)
{
- return vfs_quota_on_mount(sb, REISERFS_SB(sb)->s_qf_names[type],
- REISERFS_SB(sb)->s_jquota_fmt, type);
+ return dquot_quota_on_mount(sb, REISERFS_SB(sb)->s_qf_names[type],
+ REISERFS_SB(sb)->s_jquota_fmt, type);
}
/*
* Standard function to be called on quota_on
*/
static int reiserfs_quota_on(struct super_block *sb, int type, int format_id,
- char *name, int remount)
+ char *name)
{
int err;
struct path path;
@@ -2039,9 +2055,7 @@
if (!(REISERFS_SB(sb)->s_mount_opt & (1 << REISERFS_QUOTA)))
return -EINVAL;
- /* No more checks needed? Path and format_id are bogus anyway... */
- if (remount)
- return vfs_quota_on(sb, type, format_id, name, 1);
+
err = kern_path(name, LOOKUP_FOLLOW, &path);
if (err)
return err;
@@ -2085,7 +2099,7 @@
if (err)
goto out;
}
- err = vfs_quota_on_path(sb, type, format_id, &path);
+ err = dquot_quota_on_path(sb, type, format_id, &path);
out:
path_put(&path);
return err;
diff --git a/fs/smbfs/dir.c b/fs/smbfs/dir.c
index 6c97842..00a70ca 100644
--- a/fs/smbfs/dir.c
+++ b/fs/smbfs/dir.c
@@ -37,6 +37,7 @@
const struct file_operations smb_dir_operations =
{
+ .llseek = generic_file_llseek,
.read = generic_read_dir,
.readdir = smb_readdir,
.unlocked_ioctl = smb_ioctl,
diff --git a/fs/smbfs/file.c b/fs/smbfs/file.c
index 84ecf0e..8e187a0 100644
--- a/fs/smbfs/file.c
+++ b/fs/smbfs/file.c
@@ -28,8 +28,9 @@
#include "proto.h"
static int
-smb_fsync(struct file *file, struct dentry * dentry, int datasync)
+smb_fsync(struct file *file, int datasync)
{
+ struct dentry *dentry = file->f_path.dentry;
struct smb_sb_info *server = server_from_dentry(dentry);
int result;
diff --git a/fs/smbfs/inode.c b/fs/smbfs/inode.c
index dfa1d67..9551cb6 100644
--- a/fs/smbfs/inode.c
+++ b/fs/smbfs/inode.c
@@ -714,7 +714,7 @@
error = server->ops->truncate(inode, attr->ia_size);
if (error)
goto out;
- error = vmtruncate(inode, attr->ia_size);
+ error = simple_setsize(inode, attr->ia_size);
if (error)
goto out;
refresh = 1;
diff --git a/fs/splice.c b/fs/splice.c
index ac22b00..efdbfec 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -354,7 +354,7 @@
break;
error = add_to_page_cache_lru(page, mapping, index,
- mapping_gfp_mask(mapping));
+ GFP_KERNEL);
if (unlikely(error)) {
page_cache_release(page);
if (error == -EEXIST)
@@ -1282,7 +1282,8 @@
{
struct file *file = sd->u.file;
- return do_splice_from(pipe, file, &sd->pos, sd->total_len, sd->flags);
+ return do_splice_from(pipe, file, &file->f_pos, sd->total_len,
+ sd->flags);
}
/**
@@ -1371,8 +1372,7 @@
if (off_in)
return -ESPIPE;
if (off_out) {
- if (!out->f_op || !out->f_op->llseek ||
- out->f_op->llseek == no_llseek)
+ if (!(out->f_mode & FMODE_PWRITE))
return -EINVAL;
if (copy_from_user(&offset, off_out, sizeof(loff_t)))
return -EFAULT;
@@ -1392,8 +1392,7 @@
if (off_out)
return -ESPIPE;
if (off_in) {
- if (!in->f_op || !in->f_op->llseek ||
- in->f_op->llseek == no_llseek)
+ if (!(in->f_mode & FMODE_PREAD))
return -EINVAL;
if (copy_from_user(&offset, off_in, sizeof(loff_t)))
return -EFAULT;
diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig
index 25a00d1..cc6ce8a 100644
--- a/fs/squashfs/Kconfig
+++ b/fs/squashfs/Kconfig
@@ -26,6 +26,17 @@
If unsure, say N.
+config SQUASHFS_XATTRS
+ bool "Squashfs XATTR support"
+ depends on SQUASHFS
+ default n
+ help
+ Saying Y here includes support for extended attributes (xattrs).
+ Xattrs are name:value pairs associated with inodes by
+ the kernel or by users (see the attr(5) manual page).
+
+ If unsure, say N.
+
config SQUASHFS_EMBEDDED
bool "Additional option for memory-constrained systems"
diff --git a/fs/squashfs/Makefile b/fs/squashfs/Makefile
index df8a19e..2cee3e9 100644
--- a/fs/squashfs/Makefile
+++ b/fs/squashfs/Makefile
@@ -5,3 +5,5 @@
obj-$(CONFIG_SQUASHFS) += squashfs.o
squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
squashfs-y += namei.o super.o symlink.o zlib_wrapper.o decompressor.o
+squashfs-$(CONFIG_SQUASHFS_XATTRS) += xattr.o xattr_id.o
+
diff --git a/fs/squashfs/inode.c b/fs/squashfs/inode.c
index 49daaf6..62e63ad 100644
--- a/fs/squashfs/inode.c
+++ b/fs/squashfs/inode.c
@@ -40,11 +40,13 @@
#include <linux/fs.h>
#include <linux/vfs.h>
+#include <linux/xattr.h>
#include "squashfs_fs.h"
#include "squashfs_fs_sb.h"
#include "squashfs_fs_i.h"
#include "squashfs.h"
+#include "xattr.h"
/*
* Initialise VFS inode with the base inode information common to all
@@ -111,6 +113,7 @@
int err, type, offset = SQUASHFS_INODE_OFFSET(ino);
union squashfs_inode squashfs_ino;
struct squashfs_base_inode *sqshb_ino = &squashfs_ino.base;
+ int xattr_id = SQUASHFS_INVALID_XATTR;
TRACE("Entered squashfs_read_inode\n");
@@ -199,8 +202,10 @@
frag_offset = 0;
}
+ xattr_id = le32_to_cpu(sqsh_ino->xattr);
inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
inode->i_size = le64_to_cpu(sqsh_ino->file_size);
+ inode->i_op = &squashfs_inode_ops;
inode->i_fop = &generic_ro_fops;
inode->i_mode |= S_IFREG;
inode->i_blocks = ((inode->i_size -
@@ -251,6 +256,7 @@
if (err < 0)
goto failed_read;
+ xattr_id = le32_to_cpu(sqsh_ino->xattr);
inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
inode->i_size = le32_to_cpu(sqsh_ino->file_size);
inode->i_op = &squashfs_dir_inode_ops;
@@ -280,21 +286,33 @@
inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
inode->i_size = le32_to_cpu(sqsh_ino->symlink_size);
- inode->i_op = &page_symlink_inode_operations;
+ inode->i_op = &squashfs_symlink_inode_ops;
inode->i_data.a_ops = &squashfs_symlink_aops;
inode->i_mode |= S_IFLNK;
squashfs_i(inode)->start = block;
squashfs_i(inode)->offset = offset;
+ if (type == SQUASHFS_LSYMLINK_TYPE) {
+ __le32 xattr;
+
+ err = squashfs_read_metadata(sb, NULL, &block,
+ &offset, inode->i_size);
+ if (err < 0)
+ goto failed_read;
+ err = squashfs_read_metadata(sb, &xattr, &block,
+ &offset, sizeof(xattr));
+ if (err < 0)
+ goto failed_read;
+ xattr_id = le32_to_cpu(xattr);
+ }
+
TRACE("Symbolic link inode %x:%x, start_block %llx, offset "
"%x\n", SQUASHFS_INODE_BLK(ino), offset,
block, offset);
break;
}
case SQUASHFS_BLKDEV_TYPE:
- case SQUASHFS_CHRDEV_TYPE:
- case SQUASHFS_LBLKDEV_TYPE:
- case SQUASHFS_LCHRDEV_TYPE: {
+ case SQUASHFS_CHRDEV_TYPE: {
struct squashfs_dev_inode *sqsh_ino = &squashfs_ino.dev;
unsigned int rdev;
@@ -315,10 +333,32 @@
SQUASHFS_INODE_BLK(ino), offset, rdev);
break;
}
+ case SQUASHFS_LBLKDEV_TYPE:
+ case SQUASHFS_LCHRDEV_TYPE: {
+ struct squashfs_ldev_inode *sqsh_ino = &squashfs_ino.ldev;
+ unsigned int rdev;
+
+ err = squashfs_read_metadata(sb, sqsh_ino, &block, &offset,
+ sizeof(*sqsh_ino));
+ if (err < 0)
+ goto failed_read;
+
+ if (type == SQUASHFS_LCHRDEV_TYPE)
+ inode->i_mode |= S_IFCHR;
+ else
+ inode->i_mode |= S_IFBLK;
+ xattr_id = le32_to_cpu(sqsh_ino->xattr);
+ inode->i_op = &squashfs_inode_ops;
+ inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
+ rdev = le32_to_cpu(sqsh_ino->rdev);
+ init_special_inode(inode, inode->i_mode, new_decode_dev(rdev));
+
+ TRACE("Device inode %x:%x, rdev %x\n",
+ SQUASHFS_INODE_BLK(ino), offset, rdev);
+ break;
+ }
case SQUASHFS_FIFO_TYPE:
- case SQUASHFS_SOCKET_TYPE:
- case SQUASHFS_LFIFO_TYPE:
- case SQUASHFS_LSOCKET_TYPE: {
+ case SQUASHFS_SOCKET_TYPE: {
struct squashfs_ipc_inode *sqsh_ino = &squashfs_ino.ipc;
err = squashfs_read_metadata(sb, sqsh_ino, &block, &offset,
@@ -334,14 +374,52 @@
init_special_inode(inode, inode->i_mode, 0);
break;
}
+ case SQUASHFS_LFIFO_TYPE:
+ case SQUASHFS_LSOCKET_TYPE: {
+ struct squashfs_lipc_inode *sqsh_ino = &squashfs_ino.lipc;
+
+ err = squashfs_read_metadata(sb, sqsh_ino, &block, &offset,
+ sizeof(*sqsh_ino));
+ if (err < 0)
+ goto failed_read;
+
+ if (type == SQUASHFS_LFIFO_TYPE)
+ inode->i_mode |= S_IFIFO;
+ else
+ inode->i_mode |= S_IFSOCK;
+ xattr_id = le32_to_cpu(sqsh_ino->xattr);
+ inode->i_op = &squashfs_inode_ops;
+ inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
+ init_special_inode(inode, inode->i_mode, 0);
+ break;
+ }
default:
ERROR("Unknown inode type %d in squashfs_iget!\n", type);
return -EINVAL;
}
+ if (xattr_id != SQUASHFS_INVALID_XATTR && msblk->xattr_id_table) {
+ err = squashfs_xattr_lookup(sb, xattr_id,
+ &squashfs_i(inode)->xattr_count,
+ &squashfs_i(inode)->xattr_size,
+ &squashfs_i(inode)->xattr);
+ if (err < 0)
+ goto failed_read;
+ inode->i_blocks += ((squashfs_i(inode)->xattr_size - 1) >> 9)
+ + 1;
+ } else
+ squashfs_i(inode)->xattr_count = 0;
+
return 0;
failed_read:
ERROR("Unable to read inode 0x%llx\n", ino);
return err;
}
+
+
+const struct inode_operations squashfs_inode_ops = {
+ .getxattr = generic_getxattr,
+ .listxattr = squashfs_listxattr
+};
+
diff --git a/fs/squashfs/namei.c b/fs/squashfs/namei.c
index 5266bd8..7a9464d 100644
--- a/fs/squashfs/namei.c
+++ b/fs/squashfs/namei.c
@@ -57,11 +57,13 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/dcache.h>
+#include <linux/xattr.h>
#include "squashfs_fs.h"
#include "squashfs_fs_sb.h"
#include "squashfs_fs_i.h"
#include "squashfs.h"
+#include "xattr.h"
/*
* Lookup name in the directory index, returning the location of the metadata
@@ -237,5 +239,7 @@
const struct inode_operations squashfs_dir_inode_ops = {
- .lookup = squashfs_lookup
+ .lookup = squashfs_lookup,
+ .getxattr = generic_getxattr,
+ .listxattr = squashfs_listxattr
};
diff --git a/fs/squashfs/squashfs.h b/fs/squashfs/squashfs.h
index fe2587a..733a17c 100644
--- a/fs/squashfs/squashfs.h
+++ b/fs/squashfs/squashfs.h
@@ -73,8 +73,11 @@
unsigned int);
extern int squashfs_read_inode(struct inode *, long long);
+/* xattr.c */
+extern ssize_t squashfs_listxattr(struct dentry *, char *, size_t);
+
/*
- * Inodes, files and decompressor operations
+ * Inodes, files, decompressor and xattr operations
*/
/* dir.c */
@@ -86,11 +89,18 @@
/* file.c */
extern const struct address_space_operations squashfs_aops;
+/* inode.c */
+extern const struct inode_operations squashfs_inode_ops;
+
/* namei.c */
extern const struct inode_operations squashfs_dir_inode_ops;
/* symlink.c */
extern const struct address_space_operations squashfs_symlink_aops;
+extern const struct inode_operations squashfs_symlink_inode_ops;
+
+/* xattr.c */
+extern const struct xattr_handler *squashfs_xattr_handlers[];
/* zlib_wrapper.c */
extern const struct squashfs_decompressor squashfs_zlib_comp_ops;
diff --git a/fs/squashfs/squashfs_fs.h b/fs/squashfs/squashfs_fs.h
index 7902424..8eabb80 100644
--- a/fs/squashfs/squashfs_fs.h
+++ b/fs/squashfs/squashfs_fs.h
@@ -46,6 +46,7 @@
#define SQUASHFS_NAME_LEN 256
#define SQUASHFS_INVALID_FRAG (0xffffffffU)
+#define SQUASHFS_INVALID_XATTR (0xffffffffU)
#define SQUASHFS_INVALID_BLK (-1LL)
/* Filesystem flags */
@@ -96,6 +97,13 @@
#define SQUASHFS_LFIFO_TYPE 13
#define SQUASHFS_LSOCKET_TYPE 14
+/* Xattr types */
+#define SQUASHFS_XATTR_USER 0
+#define SQUASHFS_XATTR_TRUSTED 1
+#define SQUASHFS_XATTR_SECURITY 2
+#define SQUASHFS_XATTR_VALUE_OOL 256
+#define SQUASHFS_XATTR_PREFIX_MASK 0xff
+
/* Flag whether block is compressed or uncompressed, bit is set if block is
* uncompressed */
#define SQUASHFS_COMPRESSED_BIT (1 << 15)
@@ -174,6 +182,24 @@
#define SQUASHFS_ID_BLOCK_BYTES(A) (SQUASHFS_ID_BLOCKS(A) *\
sizeof(u64))
+/* xattr id lookup table defines */
+#define SQUASHFS_XATTR_BYTES(A) ((A) * sizeof(struct squashfs_xattr_id))
+
+#define SQUASHFS_XATTR_BLOCK(A) (SQUASHFS_XATTR_BYTES(A) / \
+ SQUASHFS_METADATA_SIZE)
+
+#define SQUASHFS_XATTR_BLOCK_OFFSET(A) (SQUASHFS_XATTR_BYTES(A) % \
+ SQUASHFS_METADATA_SIZE)
+
+#define SQUASHFS_XATTR_BLOCKS(A) ((SQUASHFS_XATTR_BYTES(A) + \
+ SQUASHFS_METADATA_SIZE - 1) / \
+ SQUASHFS_METADATA_SIZE)
+
+#define SQUASHFS_XATTR_BLOCK_BYTES(A) (SQUASHFS_XATTR_BLOCKS(A) *\
+ sizeof(u64))
+#define SQUASHFS_XATTR_BLK(A) ((unsigned int) ((A) >> 16))
+
+#define SQUASHFS_XATTR_OFFSET(A) ((unsigned int) ((A) & 0xffff))
/* cached data constants for filesystem */
#define SQUASHFS_CACHED_BLKS 8
@@ -228,7 +254,7 @@
__le64 root_inode;
__le64 bytes_used;
__le64 id_table_start;
- __le64 xattr_table_start;
+ __le64 xattr_id_table_start;
__le64 inode_table_start;
__le64 directory_table_start;
__le64 fragment_table_start;
@@ -261,6 +287,17 @@
__le32 nlink;
};
+struct squashfs_lipc_inode {
+ __le16 inode_type;
+ __le16 mode;
+ __le16 uid;
+ __le16 guid;
+ __le32 mtime;
+ __le32 inode_number;
+ __le32 nlink;
+ __le32 xattr;
+};
+
struct squashfs_dev_inode {
__le16 inode_type;
__le16 mode;
@@ -272,6 +309,18 @@
__le32 rdev;
};
+struct squashfs_ldev_inode {
+ __le16 inode_type;
+ __le16 mode;
+ __le16 uid;
+ __le16 guid;
+ __le32 mtime;
+ __le32 inode_number;
+ __le32 nlink;
+ __le32 rdev;
+ __le32 xattr;
+};
+
struct squashfs_symlink_inode {
__le16 inode_type;
__le16 mode;
@@ -349,12 +398,14 @@
union squashfs_inode {
struct squashfs_base_inode base;
struct squashfs_dev_inode dev;
+ struct squashfs_ldev_inode ldev;
struct squashfs_symlink_inode symlink;
struct squashfs_reg_inode reg;
struct squashfs_lreg_inode lreg;
struct squashfs_dir_inode dir;
struct squashfs_ldir_inode ldir;
struct squashfs_ipc_inode ipc;
+ struct squashfs_lipc_inode lipc;
};
struct squashfs_dir_entry {
@@ -377,4 +428,27 @@
unsigned int unused;
};
+struct squashfs_xattr_entry {
+ __le16 type;
+ __le16 size;
+ char data[0];
+};
+
+struct squashfs_xattr_val {
+ __le32 vsize;
+ char value[0];
+};
+
+struct squashfs_xattr_id {
+ __le64 xattr;
+ __le32 count;
+ __le32 size;
+};
+
+struct squashfs_xattr_id_table {
+ __le64 xattr_table_start;
+ __le32 xattr_ids;
+ __le32 unused;
+};
+
#endif
diff --git a/fs/squashfs/squashfs_fs_i.h b/fs/squashfs/squashfs_fs_i.h
index fbfca30..d3e3a37 100644
--- a/fs/squashfs/squashfs_fs_i.h
+++ b/fs/squashfs/squashfs_fs_i.h
@@ -26,6 +26,9 @@
struct squashfs_inode_info {
u64 start;
int offset;
+ u64 xattr;
+ unsigned int xattr_size;
+ int xattr_count;
union {
struct {
u64 fragment_block;
diff --git a/fs/squashfs/squashfs_fs_sb.h b/fs/squashfs/squashfs_fs_sb.h
index 2e77dc5..d9037a5 100644
--- a/fs/squashfs/squashfs_fs_sb.h
+++ b/fs/squashfs/squashfs_fs_sb.h
@@ -61,6 +61,7 @@
int next_meta_index;
__le64 *id_table;
__le64 *fragment_index;
+ __le64 *xattr_id_table;
struct mutex read_data_mutex;
struct mutex meta_index_mutex;
struct meta_index *meta_index;
@@ -68,9 +69,11 @@
__le64 *inode_lookup_table;
u64 inode_table;
u64 directory_table;
+ u64 xattr_table;
unsigned int block_size;
unsigned short block_log;
long long bytes_used;
unsigned int inodes;
+ int xattr_ids;
};
#endif
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index 48b6f4a..88b4f86 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -36,12 +36,14 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/magic.h>
+#include <linux/xattr.h>
#include "squashfs_fs.h"
#include "squashfs_fs_sb.h"
#include "squashfs_fs_i.h"
#include "squashfs.h"
#include "decompressor.h"
+#include "xattr.h"
static struct file_system_type squashfs_fs_type;
static const struct super_operations squashfs_super_ops;
@@ -82,7 +84,7 @@
long long root_inode;
unsigned short flags;
unsigned int fragments;
- u64 lookup_table_start;
+ u64 lookup_table_start, xattr_id_table_start;
int err;
TRACE("Entered squashfs_fill_superblock\n");
@@ -139,13 +141,6 @@
if (msblk->decompressor == NULL)
goto failed_mount;
- /*
- * Check if there's xattrs in the filesystem. These are not
- * supported in this version, so warn that they will be ignored.
- */
- if (le64_to_cpu(sblk->xattr_table_start) != SQUASHFS_INVALID_BLK)
- ERROR("Xattrs in filesystem, these will be ignored\n");
-
/* Check the filesystem does not extend beyond the end of the
block device */
msblk->bytes_used = le64_to_cpu(sblk->bytes_used);
@@ -253,7 +248,7 @@
allocate_lookup_table:
lookup_table_start = le64_to_cpu(sblk->lookup_table_start);
if (lookup_table_start == SQUASHFS_INVALID_BLK)
- goto allocate_root;
+ goto allocate_xattr_table;
/* Allocate and read inode lookup table */
msblk->inode_lookup_table = squashfs_read_inode_lookup_table(sb,
@@ -266,6 +261,21 @@
sb->s_export_op = &squashfs_export_ops;
+allocate_xattr_table:
+ sb->s_xattr = squashfs_xattr_handlers;
+ xattr_id_table_start = le64_to_cpu(sblk->xattr_id_table_start);
+ if (xattr_id_table_start == SQUASHFS_INVALID_BLK)
+ goto allocate_root;
+
+ /* Allocate and read xattr id lookup table */
+ msblk->xattr_id_table = squashfs_read_xattr_id_table(sb,
+ xattr_id_table_start, &msblk->xattr_table, &msblk->xattr_ids);
+ if (IS_ERR(msblk->xattr_id_table)) {
+ err = PTR_ERR(msblk->xattr_id_table);
+ msblk->xattr_id_table = NULL;
+ if (err != -ENOTSUPP)
+ goto failed_mount;
+ }
allocate_root:
root = new_inode(sb);
if (!root) {
@@ -301,6 +311,7 @@
kfree(msblk->inode_lookup_table);
kfree(msblk->fragment_index);
kfree(msblk->id_table);
+ kfree(msblk->xattr_id_table);
kfree(sb->s_fs_info);
sb->s_fs_info = NULL;
kfree(sblk);
@@ -355,6 +366,7 @@
kfree(sbi->fragment_index);
kfree(sbi->meta_index);
kfree(sbi->inode_lookup_table);
+ kfree(sbi->xattr_id_table);
kfree(sb->s_fs_info);
sb->s_fs_info = NULL;
}
diff --git a/fs/squashfs/symlink.c b/fs/squashfs/symlink.c
index 32b911f..ec86434 100644
--- a/fs/squashfs/symlink.c
+++ b/fs/squashfs/symlink.c
@@ -35,11 +35,13 @@
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/pagemap.h>
+#include <linux/xattr.h>
#include "squashfs_fs.h"
#include "squashfs_fs_sb.h"
#include "squashfs_fs_i.h"
#include "squashfs.h"
+#include "xattr.h"
static int squashfs_symlink_readpage(struct file *file, struct page *page)
{
@@ -114,3 +116,12 @@
const struct address_space_operations squashfs_symlink_aops = {
.readpage = squashfs_symlink_readpage
};
+
+const struct inode_operations squashfs_symlink_inode_ops = {
+ .readlink = generic_readlink,
+ .follow_link = page_follow_link_light,
+ .put_link = page_put_link,
+ .getxattr = generic_getxattr,
+ .listxattr = squashfs_listxattr
+};
+
diff --git a/fs/squashfs/xattr.c b/fs/squashfs/xattr.c
new file mode 100644
index 0000000..c7655e8
--- /dev/null
+++ b/fs/squashfs/xattr.c
@@ -0,0 +1,323 @@
+/*
+ * Squashfs - a compressed read only filesystem for Linux
+ *
+ * Copyright (c) 2010
+ * Phillip Lougher <phillip@lougher.demon.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2,
+ * or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * xattr_id.c
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/fs.h>
+#include <linux/vfs.h>
+#include <linux/xattr.h>
+#include <linux/slab.h>
+
+#include "squashfs_fs.h"
+#include "squashfs_fs_sb.h"
+#include "squashfs_fs_i.h"
+#include "squashfs.h"
+
+static const struct xattr_handler *squashfs_xattr_handler(int);
+
+ssize_t squashfs_listxattr(struct dentry *d, char *buffer,
+ size_t buffer_size)
+{
+ struct inode *inode = d->d_inode;
+ struct super_block *sb = inode->i_sb;
+ struct squashfs_sb_info *msblk = sb->s_fs_info;
+ u64 start = SQUASHFS_XATTR_BLK(squashfs_i(inode)->xattr)
+ + msblk->xattr_table;
+ int offset = SQUASHFS_XATTR_OFFSET(squashfs_i(inode)->xattr);
+ int count = squashfs_i(inode)->xattr_count;
+ size_t rest = buffer_size;
+ int err;
+
+ /* check that the file system has xattrs */
+ if (msblk->xattr_id_table == NULL)
+ return -EOPNOTSUPP;
+
+ /* loop reading each xattr name */
+ while (count--) {
+ struct squashfs_xattr_entry entry;
+ struct squashfs_xattr_val val;
+ const struct xattr_handler *handler;
+ int name_size, prefix_size = 0;
+
+ err = squashfs_read_metadata(sb, &entry, &start, &offset,
+ sizeof(entry));
+ if (err < 0)
+ goto failed;
+
+ name_size = le16_to_cpu(entry.size);
+ handler = squashfs_xattr_handler(le16_to_cpu(entry.type));
+ if (handler)
+ prefix_size = handler->list(d, buffer, rest, NULL,
+ name_size, handler->flags);
+ if (prefix_size) {
+ if (buffer) {
+ if (prefix_size + name_size + 1 > rest) {
+ err = -ERANGE;
+ goto failed;
+ }
+ buffer += prefix_size;
+ }
+ err = squashfs_read_metadata(sb, buffer, &start,
+ &offset, name_size);
+ if (err < 0)
+ goto failed;
+ if (buffer) {
+ buffer[name_size] = '\0';
+ buffer += name_size + 1;
+ }
+ rest -= prefix_size + name_size + 1;
+ } else {
+ /* no handler or insuffficient privileges, so skip */
+ err = squashfs_read_metadata(sb, NULL, &start,
+ &offset, name_size);
+ if (err < 0)
+ goto failed;
+ }
+
+
+ /* skip remaining xattr entry */
+ err = squashfs_read_metadata(sb, &val, &start, &offset,
+ sizeof(val));
+ if (err < 0)
+ goto failed;
+
+ err = squashfs_read_metadata(sb, NULL, &start, &offset,
+ le32_to_cpu(val.vsize));
+ if (err < 0)
+ goto failed;
+ }
+ err = buffer_size - rest;
+
+failed:
+ return err;
+}
+
+
+static int squashfs_xattr_get(struct inode *inode, int name_index,
+ const char *name, void *buffer, size_t buffer_size)
+{
+ struct super_block *sb = inode->i_sb;
+ struct squashfs_sb_info *msblk = sb->s_fs_info;
+ u64 start = SQUASHFS_XATTR_BLK(squashfs_i(inode)->xattr)
+ + msblk->xattr_table;
+ int offset = SQUASHFS_XATTR_OFFSET(squashfs_i(inode)->xattr);
+ int count = squashfs_i(inode)->xattr_count;
+ int name_len = strlen(name);
+ int err, vsize;
+ char *target = kmalloc(name_len, GFP_KERNEL);
+
+ if (target == NULL)
+ return -ENOMEM;
+
+ /* loop reading each xattr name */
+ for (; count; count--) {
+ struct squashfs_xattr_entry entry;
+ struct squashfs_xattr_val val;
+ int type, prefix, name_size;
+
+ err = squashfs_read_metadata(sb, &entry, &start, &offset,
+ sizeof(entry));
+ if (err < 0)
+ goto failed;
+
+ name_size = le16_to_cpu(entry.size);
+ type = le16_to_cpu(entry.type);
+ prefix = type & SQUASHFS_XATTR_PREFIX_MASK;
+
+ if (prefix == name_index && name_size == name_len)
+ err = squashfs_read_metadata(sb, target, &start,
+ &offset, name_size);
+ else
+ err = squashfs_read_metadata(sb, NULL, &start,
+ &offset, name_size);
+ if (err < 0)
+ goto failed;
+
+ if (prefix == name_index && name_size == name_len &&
+ strncmp(target, name, name_size) == 0) {
+ /* found xattr */
+ if (type & SQUASHFS_XATTR_VALUE_OOL) {
+ __le64 xattr;
+ /* val is a reference to the real location */
+ err = squashfs_read_metadata(sb, &val, &start,
+ &offset, sizeof(val));
+ if (err < 0)
+ goto failed;
+ err = squashfs_read_metadata(sb, &xattr, &start,
+ &offset, sizeof(xattr));
+ if (err < 0)
+ goto failed;
+ xattr = le64_to_cpu(xattr);
+ start = SQUASHFS_XATTR_BLK(xattr) +
+ msblk->xattr_table;
+ offset = SQUASHFS_XATTR_OFFSET(xattr);
+ }
+ /* read xattr value */
+ err = squashfs_read_metadata(sb, &val, &start, &offset,
+ sizeof(val));
+ if (err < 0)
+ goto failed;
+
+ vsize = le32_to_cpu(val.vsize);
+ if (buffer) {
+ if (vsize > buffer_size) {
+ err = -ERANGE;
+ goto failed;
+ }
+ err = squashfs_read_metadata(sb, buffer, &start,
+ &offset, vsize);
+ if (err < 0)
+ goto failed;
+ }
+ break;
+ }
+
+ /* no match, skip remaining xattr entry */
+ err = squashfs_read_metadata(sb, &val, &start, &offset,
+ sizeof(val));
+ if (err < 0)
+ goto failed;
+ err = squashfs_read_metadata(sb, NULL, &start, &offset,
+ le32_to_cpu(val.vsize));
+ if (err < 0)
+ goto failed;
+ }
+ err = count ? vsize : -ENODATA;
+
+failed:
+ kfree(target);
+ return err;
+}
+
+
+/*
+ * User namespace support
+ */
+static size_t squashfs_user_list(struct dentry *d, char *list, size_t list_size,
+ const char *name, size_t name_len, int type)
+{
+ if (list && XATTR_USER_PREFIX_LEN <= list_size)
+ memcpy(list, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN);
+ return XATTR_USER_PREFIX_LEN;
+}
+
+static int squashfs_user_get(struct dentry *d, const char *name, void *buffer,
+ size_t size, int type)
+{
+ if (name[0] == '\0')
+ return -EINVAL;
+
+ return squashfs_xattr_get(d->d_inode, SQUASHFS_XATTR_USER, name,
+ buffer, size);
+}
+
+static const struct xattr_handler squashfs_xattr_user_handler = {
+ .prefix = XATTR_USER_PREFIX,
+ .list = squashfs_user_list,
+ .get = squashfs_user_get
+};
+
+/*
+ * Trusted namespace support
+ */
+static size_t squashfs_trusted_list(struct dentry *d, char *list,
+ size_t list_size, const char *name, size_t name_len, int type)
+{
+ if (!capable(CAP_SYS_ADMIN))
+ return 0;
+
+ if (list && XATTR_TRUSTED_PREFIX_LEN <= list_size)
+ memcpy(list, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN);
+ return XATTR_TRUSTED_PREFIX_LEN;
+}
+
+static int squashfs_trusted_get(struct dentry *d, const char *name,
+ void *buffer, size_t size, int type)
+{
+ if (name[0] == '\0')
+ return -EINVAL;
+
+ return squashfs_xattr_get(d->d_inode, SQUASHFS_XATTR_TRUSTED, name,
+ buffer, size);
+}
+
+static const struct xattr_handler squashfs_xattr_trusted_handler = {
+ .prefix = XATTR_TRUSTED_PREFIX,
+ .list = squashfs_trusted_list,
+ .get = squashfs_trusted_get
+};
+
+/*
+ * Security namespace support
+ */
+static size_t squashfs_security_list(struct dentry *d, char *list,
+ size_t list_size, const char *name, size_t name_len, int type)
+{
+ if (list && XATTR_SECURITY_PREFIX_LEN <= list_size)
+ memcpy(list, XATTR_SECURITY_PREFIX, XATTR_SECURITY_PREFIX_LEN);
+ return XATTR_SECURITY_PREFIX_LEN;
+}
+
+static int squashfs_security_get(struct dentry *d, const char *name,
+ void *buffer, size_t size, int type)
+{
+ if (name[0] == '\0')
+ return -EINVAL;
+
+ return squashfs_xattr_get(d->d_inode, SQUASHFS_XATTR_SECURITY, name,
+ buffer, size);
+}
+
+static const struct xattr_handler squashfs_xattr_security_handler = {
+ .prefix = XATTR_SECURITY_PREFIX,
+ .list = squashfs_security_list,
+ .get = squashfs_security_get
+};
+
+static inline const struct xattr_handler *squashfs_xattr_handler(int type)
+{
+ if (type & ~(SQUASHFS_XATTR_PREFIX_MASK | SQUASHFS_XATTR_VALUE_OOL))
+ /* ignore unrecognised type */
+ return NULL;
+
+ switch (type & SQUASHFS_XATTR_PREFIX_MASK) {
+ case SQUASHFS_XATTR_USER:
+ return &squashfs_xattr_user_handler;
+ case SQUASHFS_XATTR_TRUSTED:
+ return &squashfs_xattr_trusted_handler;
+ case SQUASHFS_XATTR_SECURITY:
+ return &squashfs_xattr_security_handler;
+ default:
+ /* ignore unrecognised type */
+ return NULL;
+ }
+}
+
+const struct xattr_handler *squashfs_xattr_handlers[] = {
+ &squashfs_xattr_user_handler,
+ &squashfs_xattr_trusted_handler,
+ &squashfs_xattr_security_handler,
+ NULL
+};
+
diff --git a/fs/squashfs/xattr.h b/fs/squashfs/xattr.h
new file mode 100644
index 0000000..9da071a
--- /dev/null
+++ b/fs/squashfs/xattr.h
@@ -0,0 +1,46 @@
+/*
+ * Squashfs - a compressed read only filesystem for Linux
+ *
+ * Copyright (c) 2010
+ * Phillip Lougher <phillip@lougher.demon.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2,
+ * or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * xattr.h
+ */
+
+#ifdef CONFIG_SQUASHFS_XATTRS
+extern __le64 *squashfs_read_xattr_id_table(struct super_block *, u64,
+ u64 *, int *);
+extern int squashfs_xattr_lookup(struct super_block *, unsigned int, int *,
+ int *, unsigned long long *);
+#else
+static inline __le64 *squashfs_read_xattr_id_table(struct super_block *sb,
+ u64 start, u64 *xattr_table_start, int *xattr_ids)
+{
+ ERROR("Xattrs in filesystem, these will be ignored\n");
+ return ERR_PTR(-ENOTSUPP);
+}
+
+static inline int squashfs_xattr_lookup(struct super_block *sb,
+ unsigned int index, int *count, int *size,
+ unsigned long long *xattr)
+{
+ return 0;
+}
+#define squashfs_listxattr NULL
+#define generic_getxattr NULL
+#define squashfs_xattr_handlers NULL
+#endif
diff --git a/fs/squashfs/xattr_id.c b/fs/squashfs/xattr_id.c
new file mode 100644
index 0000000..cfb4110
--- /dev/null
+++ b/fs/squashfs/xattr_id.c
@@ -0,0 +1,100 @@
+/*
+ * Squashfs - a compressed read only filesystem for Linux
+ *
+ * Copyright (c) 2010
+ * Phillip Lougher <phillip@lougher.demon.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2,
+ * or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * xattr_id.c
+ */
+
+/*
+ * This file implements code to map the 32-bit xattr id stored in the inode
+ * into the on disk location of the xattr data.
+ */
+
+#include <linux/fs.h>
+#include <linux/vfs.h>
+#include <linux/slab.h>
+
+#include "squashfs_fs.h"
+#include "squashfs_fs_sb.h"
+#include "squashfs_fs_i.h"
+#include "squashfs.h"
+
+/*
+ * Map xattr id using the xattr id look up table
+ */
+int squashfs_xattr_lookup(struct super_block *sb, unsigned int index,
+ int *count, unsigned int *size, unsigned long long *xattr)
+{
+ struct squashfs_sb_info *msblk = sb->s_fs_info;
+ int block = SQUASHFS_XATTR_BLOCK(index);
+ int offset = SQUASHFS_XATTR_BLOCK_OFFSET(index);
+ u64 start_block = le64_to_cpu(msblk->xattr_id_table[block]);
+ struct squashfs_xattr_id id;
+ int err;
+
+ err = squashfs_read_metadata(sb, &id, &start_block, &offset,
+ sizeof(id));
+ if (err < 0)
+ return err;
+
+ *xattr = le64_to_cpu(id.xattr);
+ *size = le32_to_cpu(id.size);
+ *count = le32_to_cpu(id.count);
+ return 0;
+}
+
+
+/*
+ * Read uncompressed xattr id lookup table indexes from disk into memory
+ */
+__le64 *squashfs_read_xattr_id_table(struct super_block *sb, u64 start,
+ u64 *xattr_table_start, int *xattr_ids)
+{
+ unsigned int len;
+ __le64 *xid_table;
+ struct squashfs_xattr_id_table id_table;
+ int err;
+
+ err = squashfs_read_table(sb, &id_table, start, sizeof(id_table));
+ if (err < 0) {
+ ERROR("unable to read xattr id table\n");
+ return ERR_PTR(err);
+ }
+ *xattr_table_start = le64_to_cpu(id_table.xattr_table_start);
+ *xattr_ids = le32_to_cpu(id_table.xattr_ids);
+ len = SQUASHFS_XATTR_BLOCK_BYTES(*xattr_ids);
+
+ TRACE("In read_xattr_index_table, length %d\n", len);
+
+ /* Allocate xattr id lookup table indexes */
+ xid_table = kmalloc(len, GFP_KERNEL);
+ if (xid_table == NULL) {
+ ERROR("Failed to allocate xattr id index table\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ err = squashfs_read_table(sb, xid_table, start + sizeof(id_table), len);
+ if (err < 0) {
+ ERROR("unable to read xattr id index table\n");
+ kfree(xid_table);
+ return ERR_PTR(err);
+ }
+
+ return xid_table;
+}
diff --git a/fs/super.c b/fs/super.c
index 69688b1..938119a 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -24,7 +24,6 @@
#include <linux/slab.h>
#include <linux/acct.h>
#include <linux/blkdev.h>
-#include <linux/quotaops.h>
#include <linux/mount.h>
#include <linux/security.h>
#include <linux/writeback.h> /* for the emergency remount stuff */
@@ -94,8 +93,6 @@
init_rwsem(&s->s_dquot.dqptr_sem);
init_waitqueue_head(&s->s_wait_unfrozen);
s->s_maxbytes = MAX_NON_LFS;
- s->dq_op = sb_dquot_ops;
- s->s_qcop = sb_quotactl_ops;
s->s_op = &default_op;
s->s_time_gran = 1000000000;
}
@@ -160,7 +157,6 @@
{
struct file_system_type *fs = s->s_type;
if (atomic_dec_and_test(&s->s_active)) {
- vfs_dq_off(s, 0);
fs->kill_sb(s);
put_filesystem(fs);
put_super(s);
@@ -378,6 +374,8 @@
up_read(&sb->s_umount);
spin_lock(&sb_lock);
+ /* lock was dropped, must reset next */
+ list_safe_reset_next(sb, n, s_list);
__put_super(sb);
}
}
@@ -409,6 +407,8 @@
up_read(&sb->s_umount);
spin_lock(&sb_lock);
+ /* lock was dropped, must reset next */
+ list_safe_reset_next(sb, n, s_list);
__put_super(sb);
}
spin_unlock(&sb_lock);
@@ -524,7 +524,7 @@
int do_remount_sb(struct super_block *sb, int flags, void *data, int force)
{
int retval;
- int remount_rw, remount_ro;
+ int remount_ro;
if (sb->s_frozen != SB_UNFROZEN)
return -EBUSY;
@@ -540,7 +540,6 @@
sync_filesystem(sb);
remount_ro = (flags & MS_RDONLY) && !(sb->s_flags & MS_RDONLY);
- remount_rw = !(flags & MS_RDONLY) && (sb->s_flags & MS_RDONLY);
/* If we are remounting RDONLY and current sb is read/write,
make sure there are no rw files opened */
@@ -549,9 +548,6 @@
mark_files_ro(sb);
else if (!fs_may_remount_ro(sb))
return -EBUSY;
- retval = vfs_dq_off(sb, 1);
- if (retval < 0 && retval != -ENOSYS)
- return -EBUSY;
}
if (sb->s_op->remount_fs) {
@@ -560,8 +556,7 @@
return retval;
}
sb->s_flags = (sb->s_flags & ~MS_RMT_MASK) | (flags & MS_RMT_MASK);
- if (remount_rw)
- vfs_dq_quota_on_remount(sb);
+
/*
* Some filesystems modify their metadata via some other path than the
* bdev buffer cache (eg. use a private mapping, or directories in
@@ -594,6 +589,8 @@
}
up_write(&sb->s_umount);
spin_lock(&sb_lock);
+ /* lock was dropped, must reset next */
+ list_safe_reset_next(sb, n, s_list);
__put_super(sb);
}
spin_unlock(&sb_lock);
@@ -946,8 +943,8 @@
EXPORT_SYMBOL_GPL(vfs_kern_mount);
/**
- * freeze_super -- lock the filesystem and force it into a consistent state
- * @super: the super to lock
+ * freeze_super - lock the filesystem and force it into a consistent state
+ * @sb: the super to lock
*
* Syncs the super to make sure the filesystem is consistent and calls the fs's
* freeze_fs. Subsequent calls to this without first thawing the fs will return
diff --git a/fs/sync.c b/fs/sync.c
index e8cbd41..15aa6f0 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -42,7 +42,7 @@
if (wait)
sync_inodes_sb(sb);
else
- writeback_inodes_sb_locked(sb);
+ writeback_inodes_sb(sb);
if (sb->s_op->sync_fs)
sb->s_op->sync_fs(sb, wait);
@@ -130,12 +130,10 @@
/*
* Generic function to fsync a file.
- *
- * filp may be NULL if called via the msync of a vma.
*/
-int file_fsync(struct file *filp, struct dentry *dentry, int datasync)
+int file_fsync(struct file *filp, int datasync)
{
- struct inode * inode = dentry->d_inode;
+ struct inode *inode = filp->f_mapping->host;
struct super_block * sb;
int ret, err;
@@ -183,7 +181,7 @@
* livelocks in fsync_buffers_list().
*/
mutex_lock(&mapping->host->i_mutex);
- err = file->f_op->fsync(file, file->f_path.dentry, datasync);
+ err = file->f_op->fsync(file, datasync);
if (!ret)
ret = err;
mutex_unlock(&mapping->host->i_mutex);
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index bbd77e9..0835a3b 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -117,13 +117,13 @@
if (error)
goto out;
- iattr->ia_valid &= ~ATTR_SIZE; /* ignore size changes */
-
- error = inode_setattr(inode, iattr);
+ error = sysfs_sd_setattr(sd, iattr);
if (error)
goto out;
- error = sysfs_sd_setattr(sd, iattr);
+ /* this ignores size changes */
+ generic_setattr(inode, iattr);
+
out:
mutex_unlock(&sysfs_mutex);
return error;
diff --git a/fs/sysv/dir.c b/fs/sysv/dir.c
index 1dabed2..79941e4 100644
--- a/fs/sysv/dir.c
+++ b/fs/sysv/dir.c
@@ -24,7 +24,7 @@
.llseek = generic_file_llseek,
.read = generic_read_dir,
.readdir = sysv_readdir,
- .fsync = simple_fsync,
+ .fsync = generic_file_fsync,
};
static inline void dir_put_page(struct page *page)
diff --git a/fs/sysv/file.c b/fs/sysv/file.c
index 96340c0..750cc22 100644
--- a/fs/sysv/file.c
+++ b/fs/sysv/file.c
@@ -26,7 +26,7 @@
.write = do_sync_write,
.aio_write = generic_file_aio_write,
.mmap = generic_file_mmap,
- .fsync = simple_fsync,
+ .fsync = generic_file_fsync,
.splice_read = generic_file_splice_read,
};
diff --git a/fs/sysv/ialloc.c b/fs/sysv/ialloc.c
index bbd69bd..fcc498e 100644
--- a/fs/sysv/ialloc.c
+++ b/fs/sysv/ialloc.c
@@ -25,6 +25,7 @@
#include <linux/stat.h>
#include <linux/string.h>
#include <linux/buffer_head.h>
+#include <linux/writeback.h>
#include "sysv.h"
/* We don't trust the value of
@@ -139,6 +140,9 @@
struct inode *inode;
sysv_ino_t ino;
unsigned count;
+ struct writeback_control wbc = {
+ .sync_mode = WB_SYNC_NONE
+ };
inode = new_inode(sb);
if (!inode)
@@ -168,7 +172,7 @@
insert_inode_hash(inode);
mark_inode_dirty(inode);
- sysv_write_inode(inode, 0); /* ensure inode not allocated again */
+ sysv_write_inode(inode, &wbc); /* ensure inode not allocated again */
mark_inode_dirty(inode); /* cleared by sysv_write_inode() */
/* That's it. */
unlock_super(sb);
diff --git a/fs/sysv/inode.c b/fs/sysv/inode.c
index 4573734..d4a5380 100644
--- a/fs/sysv/inode.c
+++ b/fs/sysv/inode.c
@@ -43,6 +43,7 @@
* then attach current time stamp.
* But if the filesystem was marked clean, keep it clean.
*/
+ sb->s_dirt = 0;
old_time = fs32_to_cpu(sbi, *sbi->s_sb_time);
if (sbi->s_type == FSTYPE_SYSV4) {
if (*sbi->s_sb_state == cpu_to_fs32(sbi, 0x7c269d38 - old_time))
diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c
index 076ca50..c8ff0d1 100644
--- a/fs/ubifs/budget.c
+++ b/fs/ubifs/budget.c
@@ -62,7 +62,9 @@
*/
static void shrink_liability(struct ubifs_info *c, int nr_to_write)
{
+ down_read(&c->vfs_sb->s_umount);
writeback_inodes_sb(c->vfs_sb);
+ up_read(&c->vfs_sb->s_umount);
}
/**
diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c
index 5692cf7..12f445c 100644
--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -967,12 +967,15 @@
* the page locked, and it locks @ui_mutex. However, write-back does take inode
* @i_mutex, which means other VFS operations may be run on this inode at the
* same time. And the problematic one is truncation to smaller size, from where
- * we have to call 'vmtruncate()', which first changes @inode->i_size, then
+ * we have to call 'simple_setsize()', which first changes @inode->i_size, then
* drops the truncated pages. And while dropping the pages, it takes the page
- * lock. This means that 'do_truncation()' cannot call 'vmtruncate()' with
+ * lock. This means that 'do_truncation()' cannot call 'simple_setsize()' with
* @ui_mutex locked, because it would deadlock with 'ubifs_writepage()'. This
* means that @inode->i_size is changed while @ui_mutex is unlocked.
*
+ * XXX: with the new truncate the above is not true anymore, the simple_setsize
+ * calls can be replaced with the individual components.
+ *
* But in 'ubifs_writepage()' we have to guarantee that we do not write beyond
* inode size. How do we do this if @inode->i_size may became smaller while we
* are in the middle of 'ubifs_writepage()'? The UBIFS solution is the
@@ -1125,7 +1128,7 @@
budgeted = 0;
}
- err = vmtruncate(inode, new_size);
+ err = simple_setsize(inode, new_size);
if (err)
goto out_budg;
@@ -1214,7 +1217,7 @@
if (attr->ia_valid & ATTR_SIZE) {
dbg_gen("size %lld -> %lld", inode->i_size, new_size);
- err = vmtruncate(inode, new_size);
+ err = simple_setsize(inode, new_size);
if (err)
goto out;
}
@@ -1223,7 +1226,7 @@
if (attr->ia_valid & ATTR_SIZE) {
/* Truncation changes inode [mc]time */
inode->i_mtime = inode->i_ctime = ubifs_current_time(inode);
- /* 'vmtruncate()' changed @i_size, update @ui_size */
+ /* 'simple_setsize()' changed @i_size, update @ui_size */
ui->ui_size = inode->i_size;
}
@@ -1304,9 +1307,9 @@
return NULL;
}
-int ubifs_fsync(struct file *file, struct dentry *dentry, int datasync)
+int ubifs_fsync(struct file *file, int datasync)
{
- struct inode *inode = dentry->d_inode;
+ struct inode *inode = file->f_mapping->host;
struct ubifs_info *c = inode->i_sb->s_fs_info;
int err;
diff --git a/fs/ubifs/shrinker.c b/fs/ubifs/shrinker.c
index 02feb59..0b20111 100644
--- a/fs/ubifs/shrinker.c
+++ b/fs/ubifs/shrinker.c
@@ -277,7 +277,7 @@
return 0;
}
-int ubifs_shrinker(int nr, gfp_t gfp_mask)
+int ubifs_shrinker(struct shrinker *shrink, int nr, gfp_t gfp_mask)
{
int freed, contention = 0;
long clean_zn_cnt = atomic_long_read(&ubifs_clean_zn_cnt);
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index bd2542d..0431087 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -379,7 +379,7 @@
* The @ui_size is a "shadow" variable for @inode->i_size and UBIFS uses
* @ui_size instead of @inode->i_size. The reason for this is that UBIFS cannot
* make sure @inode->i_size is always changed under @ui_mutex, because it
- * cannot call 'vmtruncate()' with @ui_mutex locked, because it would deadlock
+ * cannot call 'simple_setsize()' with @ui_mutex locked, because it would deadlock
* with 'ubifs_writepage()' (see file.c). All the other inode fields are
* changed under @ui_mutex, so they do not need "shadow" fields. Note, one
* could consider to rework locking and base it on "shadow" fields.
@@ -1575,7 +1575,7 @@
int ubifs_tnc_end_commit(struct ubifs_info *c);
/* shrinker.c */
-int ubifs_shrinker(int nr_to_scan, gfp_t gfp_mask);
+int ubifs_shrinker(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask);
/* commit.c */
int ubifs_bg_thread(void *info);
@@ -1678,7 +1678,7 @@
int ubifs_calc_dark(const struct ubifs_info *c, int spc);
/* file.c */
-int ubifs_fsync(struct file *file, struct dentry *dentry, int datasync);
+int ubifs_fsync(struct file *file, int datasync);
int ubifs_setattr(struct dentry *dentry, struct iattr *attr);
/* dir.c */
diff --git a/fs/udf/balloc.c b/fs/udf/balloc.c
index 9a9378b..b608efa 100644
--- a/fs/udf/balloc.c
+++ b/fs/udf/balloc.c
@@ -21,7 +21,6 @@
#include "udfdecl.h"
-#include <linux/quotaops.h>
#include <linux/buffer_head.h>
#include <linux/bitops.h>
@@ -159,8 +158,6 @@
udf_debug("byte=%2x\n",
((char *)bh->b_data)[(bit + i) >> 3]);
} else {
- if (inode)
- dquot_free_block(inode, 1);
udf_add_free_space(sb, sbi->s_partition, 1);
}
}
@@ -210,15 +207,8 @@
bit = block % (sb->s_blocksize << 3);
while (bit < (sb->s_blocksize << 3) && block_count > 0) {
- if (!udf_test_bit(bit, bh->b_data))
+ if (!udf_clear_bit(bit, bh->b_data))
goto out;
- else if (dquot_prealloc_block(inode, 1))
- goto out;
- else if (!udf_clear_bit(bit, bh->b_data)) {
- udf_debug("bit already cleared for block %d\n", bit);
- dquot_free_block(inode, 1);
- goto out;
- }
block_count--;
alloc_count++;
bit++;
@@ -338,20 +328,6 @@
}
got_block:
-
- /*
- * Check quota for allocation of this block.
- */
- if (inode) {
- int ret = dquot_alloc_block(inode, 1);
-
- if (ret) {
- mutex_unlock(&sbi->s_alloc_mutex);
- *err = ret;
- return 0;
- }
- }
-
newblock = bit + (block_group << (sb->s_blocksize_bits + 3)) -
(sizeof(struct spaceBitmapDesc) << 3);
@@ -401,10 +377,6 @@
}
iinfo = UDF_I(table);
- /* We do this up front - There are some error conditions that
- could occure, but.. oh well */
- if (inode)
- dquot_free_block(inode, count);
udf_add_free_space(sb, sbi->s_partition, count);
start = bloc->logicalBlockNum + offset;
@@ -649,10 +621,7 @@
epos.offset -= adsize;
alloc_count = (elen >> sb->s_blocksize_bits);
- if (inode && dquot_prealloc_block(inode,
- alloc_count > block_count ? block_count : alloc_count))
- alloc_count = 0;
- else if (alloc_count > block_count) {
+ if (alloc_count > block_count) {
alloc_count = block_count;
eloc.logicalBlockNum += alloc_count;
elen -= (alloc_count << sb->s_blocksize_bits);
@@ -752,14 +721,6 @@
newblock = goal_eloc.logicalBlockNum;
goal_eloc.logicalBlockNum++;
goal_elen -= sb->s_blocksize;
- if (inode) {
- *err = dquot_alloc_block(inode, 1);
- if (*err) {
- brelse(goal_epos.bh);
- mutex_unlock(&sbi->s_alloc_mutex);
- return 0;
- }
- }
if (goal_elen)
udf_write_aext(table, &goal_epos, &goal_eloc, goal_elen, 1);
diff --git a/fs/udf/dir.c b/fs/udf/dir.c
index 3a84455..51552bf 100644
--- a/fs/udf/dir.c
+++ b/fs/udf/dir.c
@@ -207,8 +207,9 @@
/* readdir and lookup functions */
const struct file_operations udf_dir_operations = {
+ .llseek = generic_file_llseek,
.read = generic_read_dir,
.readdir = udf_readdir,
.unlocked_ioctl = udf_ioctl,
- .fsync = simple_fsync,
+ .fsync = generic_file_fsync,
};
diff --git a/fs/udf/file.c b/fs/udf/file.c
index baae3a7..94e06d6 100644
--- a/fs/udf/file.c
+++ b/fs/udf/file.c
@@ -34,7 +34,6 @@
#include <linux/errno.h>
#include <linux/smp_lock.h>
#include <linux/pagemap.h>
-#include <linux/quotaops.h>
#include <linux/buffer_head.h>
#include <linux/aio.h>
#include <linux/smp_lock.h>
@@ -219,39 +218,16 @@
.read = do_sync_read,
.aio_read = generic_file_aio_read,
.unlocked_ioctl = udf_ioctl,
- .open = dquot_file_open,
+ .open = generic_file_open,
.mmap = generic_file_mmap,
.write = do_sync_write,
.aio_write = udf_file_aio_write,
.release = udf_release_file,
- .fsync = simple_fsync,
+ .fsync = generic_file_fsync,
.splice_read = generic_file_splice_read,
.llseek = generic_file_llseek,
};
-int udf_setattr(struct dentry *dentry, struct iattr *iattr)
-{
- struct inode *inode = dentry->d_inode;
- int error;
-
- error = inode_change_ok(inode, iattr);
- if (error)
- return error;
-
- if (is_quota_modification(inode, iattr))
- dquot_initialize(inode);
-
- if ((iattr->ia_valid & ATTR_UID && iattr->ia_uid != inode->i_uid) ||
- (iattr->ia_valid & ATTR_GID && iattr->ia_gid != inode->i_gid)) {
- error = dquot_transfer(inode, iattr);
- if (error)
- return error;
- }
-
- return inode_setattr(inode, iattr);
-}
-
const struct inode_operations udf_file_inode_operations = {
.truncate = udf_truncate,
- .setattr = udf_setattr,
};
diff --git a/fs/udf/ialloc.c b/fs/udf/ialloc.c
index 2b5586c..18cd711 100644
--- a/fs/udf/ialloc.c
+++ b/fs/udf/ialloc.c
@@ -20,7 +20,6 @@
#include "udfdecl.h"
#include <linux/fs.h>
-#include <linux/quotaops.h>
#include <linux/sched.h>
#include <linux/slab.h>
@@ -32,13 +31,6 @@
struct super_block *sb = inode->i_sb;
struct udf_sb_info *sbi = UDF_SB(sb);
- /*
- * Note: we must free any quota before locking the superblock,
- * as writing the quota to disk may need the lock as well.
- */
- dquot_free_inode(inode);
- dquot_drop(inode);
-
clear_inode(inode);
mutex_lock(&sbi->s_alloc_mutex);
@@ -61,7 +53,7 @@
struct super_block *sb = dir->i_sb;
struct udf_sb_info *sbi = UDF_SB(sb);
struct inode *inode;
- int block, ret;
+ int block;
uint32_t start = UDF_I(dir)->i_location.logicalBlockNum;
struct udf_inode_info *iinfo;
struct udf_inode_info *dinfo = UDF_I(dir);
@@ -146,17 +138,6 @@
insert_inode_hash(inode);
mark_inode_dirty(inode);
- dquot_initialize(inode);
- ret = dquot_alloc_inode(inode);
- if (ret) {
- dquot_drop(inode);
- inode->i_flags |= S_NOQUOTA;
- inode->i_nlink = 0;
- iput(inode);
- *err = ret;
- return NULL;
- }
-
*err = 0;
return inode;
}
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index 8a3fbd1..124852b 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -36,7 +36,6 @@
#include <linux/pagemap.h>
#include <linux/buffer_head.h>
#include <linux/writeback.h>
-#include <linux/quotaops.h>
#include <linux/slab.h>
#include <linux/crc-itu-t.h>
@@ -71,9 +70,6 @@
void udf_delete_inode(struct inode *inode)
{
- if (!is_bad_inode(inode))
- dquot_initialize(inode);
-
truncate_inode_pages(&inode->i_data, 0);
if (is_bad_inode(inode))
@@ -113,7 +109,6 @@
(unsigned long long)iinfo->i_lenExtents);
}
- dquot_drop(inode);
kfree(iinfo->i_ext.i_data);
iinfo->i_ext.i_data = NULL;
}
diff --git a/fs/udf/namei.c b/fs/udf/namei.c
index 585f733..bf5fc67 100644
--- a/fs/udf/namei.c
+++ b/fs/udf/namei.c
@@ -27,7 +27,6 @@
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/slab.h>
-#include <linux/quotaops.h>
#include <linux/smp_lock.h>
#include <linux/buffer_head.h>
#include <linux/sched.h>
@@ -563,8 +562,6 @@
int err;
struct udf_inode_info *iinfo;
- dquot_initialize(dir);
-
lock_kernel();
inode = udf_new_inode(dir, mode, &err);
if (!inode) {
@@ -617,8 +614,6 @@
if (!old_valid_dev(rdev))
return -EINVAL;
- dquot_initialize(dir);
-
lock_kernel();
err = -EIO;
inode = udf_new_inode(dir, mode, &err);
@@ -664,8 +659,6 @@
struct udf_inode_info *dinfo = UDF_I(dir);
struct udf_inode_info *iinfo;
- dquot_initialize(dir);
-
lock_kernel();
err = -EMLINK;
if (dir->i_nlink >= (256 << sizeof(dir->i_nlink)) - 1)
@@ -800,8 +793,6 @@
struct fileIdentDesc *fi, cfi;
struct kernel_lb_addr tloc;
- dquot_initialize(dir);
-
retval = -ENOENT;
lock_kernel();
fi = udf_find_entry(dir, &dentry->d_name, &fibh, &cfi);
@@ -848,8 +839,6 @@
struct fileIdentDesc cfi;
struct kernel_lb_addr tloc;
- dquot_initialize(dir);
-
retval = -ENOENT;
lock_kernel();
fi = udf_find_entry(dir, &dentry->d_name, &fibh, &cfi);
@@ -904,8 +893,6 @@
struct buffer_head *bh;
struct udf_inode_info *iinfo;
- dquot_initialize(dir);
-
lock_kernel();
inode = udf_new_inode(dir, S_IFLNK | S_IRWXUGO, &err);
if (!inode)
@@ -1075,8 +1062,6 @@
int err;
struct buffer_head *bh;
- dquot_initialize(dir);
-
lock_kernel();
if (inode->i_nlink >= (256 << sizeof(inode->i_nlink)) - 1) {
unlock_kernel();
@@ -1139,9 +1124,6 @@
struct kernel_lb_addr tloc;
struct udf_inode_info *old_iinfo = UDF_I(old_inode);
- dquot_initialize(old_dir);
- dquot_initialize(new_dir);
-
lock_kernel();
ofi = udf_find_entry(old_dir, &old_dentry->d_name, &ofibh, &ocfi);
if (ofi) {
@@ -1387,7 +1369,6 @@
const struct inode_operations udf_dir_inode_operations = {
.lookup = udf_lookup,
.create = udf_create,
- .setattr = udf_setattr,
.link = udf_link,
.unlink = udf_unlink,
.symlink = udf_symlink,
@@ -1400,5 +1381,4 @@
.readlink = generic_readlink,
.follow_link = page_follow_link_light,
.put_link = page_put_link,
- .setattr = udf_setattr,
};
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 1e4543c..612d1e2 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -557,6 +557,7 @@
{
struct udf_options uopt;
struct udf_sb_info *sbi = UDF_SB(sb);
+ int error = 0;
uopt.flags = sbi->s_flags;
uopt.uid = sbi->s_uid;
@@ -582,17 +583,17 @@
*flags |= MS_RDONLY;
}
- if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) {
- unlock_kernel();
- return 0;
- }
+ if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY))
+ goto out_unlock;
+
if (*flags & MS_RDONLY)
udf_close_lvid(sb);
else
udf_open_lvid(sb);
+out_unlock:
unlock_kernel();
- return 0;
+ return error;
}
/* Check Volume Structure Descriptors (ECMA 167 2/9.1) */
@@ -1939,7 +1940,7 @@
/* Fill in the rest of the superblock */
sb->s_op = &udf_sb_ops;
sb->s_export_op = &udf_export_ops;
- sb->dq_op = NULL;
+
sb->s_dirt = 0;
sb->s_magic = UDF_SUPER_MAGIC;
sb->s_time_gran = 1000;
diff --git a/fs/udf/udfdecl.h b/fs/udf/udfdecl.h
index 9079ff7..2bac035 100644
--- a/fs/udf/udfdecl.h
+++ b/fs/udf/udfdecl.h
@@ -131,7 +131,6 @@
/* file.c */
extern long udf_ioctl(struct file *, unsigned int, unsigned long);
-extern int udf_setattr(struct dentry *dentry, struct iattr *iattr);
/* inode.c */
extern struct inode *udf_iget(struct super_block *, struct kernel_lb_addr *);
extern int udf_sync_inode(struct inode *);
diff --git a/fs/ufs/balloc.c b/fs/ufs/balloc.c
index 5cfa4d8..048484f 100644
--- a/fs/ufs/balloc.c
+++ b/fs/ufs/balloc.c
@@ -12,7 +12,6 @@
#include <linux/stat.h>
#include <linux/time.h>
#include <linux/string.h>
-#include <linux/quotaops.h>
#include <linux/buffer_head.h>
#include <linux/capability.h>
#include <linux/bitops.h>
@@ -85,9 +84,6 @@
"bit already cleared for fragment %u", i);
}
- dquot_free_block(inode, count);
-
-
fs32_add(sb, &ucg->cg_cs.cs_nffree, count);
uspi->cs_total.cs_nffree += count;
fs32_add(sb, &UFS_SB(sb)->fs_cs(cgno).cs_nffree, count);
@@ -195,7 +191,6 @@
ubh_setblock(UCPI_UBH(ucpi), ucpi->c_freeoff, blkno);
if ((UFS_SB(sb)->s_flags & UFS_CG_MASK) == UFS_CG_44BSD)
ufs_clusteracct (sb, ucpi, blkno, 1);
- dquot_free_block(inode, uspi->s_fpb);
fs32_add(sb, &ucg->cg_cs.cs_nbfree, 1);
uspi->cs_total.cs_nbfree++;
@@ -511,7 +506,6 @@
struct ufs_cg_private_info * ucpi;
struct ufs_cylinder_group * ucg;
unsigned cgno, fragno, fragoff, count, fragsize, i;
- int ret;
UFSD("ENTER, fragment %llu, oldcount %u, newcount %u\n",
(unsigned long long)fragment, oldcount, newcount);
@@ -557,11 +551,6 @@
fs32_add(sb, &ucg->cg_frsum[fragsize - count], 1);
for (i = oldcount; i < newcount; i++)
ubh_clrbit (UCPI_UBH(ucpi), ucpi->c_freeoff, fragno + i);
- ret = dquot_alloc_block(inode, count);
- if (ret) {
- *err = ret;
- return 0;
- }
fs32_sub(sb, &ucg->cg_cs.cs_nffree, count);
fs32_sub(sb, &UFS_SB(sb)->fs_cs(cgno).cs_nffree, count);
@@ -598,7 +587,6 @@
struct ufs_cylinder_group * ucg;
unsigned oldcg, i, j, k, allocsize;
u64 result;
- int ret;
UFSD("ENTER, ino %lu, cgno %u, goal %llu, count %u\n",
inode->i_ino, cgno, (unsigned long long)goal, count);
@@ -667,7 +655,6 @@
for (i = count; i < uspi->s_fpb; i++)
ubh_setbit (UCPI_UBH(ucpi), ucpi->c_freeoff, goal + i);
i = uspi->s_fpb - count;
- dquot_free_block(inode, i);
fs32_add(sb, &ucg->cg_cs.cs_nffree, i);
uspi->cs_total.cs_nffree += i;
@@ -679,11 +666,6 @@
result = ufs_bitmap_search (sb, ucpi, goal, allocsize);
if (result == INVBLOCK)
return 0;
- ret = dquot_alloc_block(inode, count);
- if (ret) {
- *err = ret;
- return 0;
- }
for (i = 0; i < count; i++)
ubh_clrbit (UCPI_UBH(ucpi), ucpi->c_freeoff, result + i);
@@ -718,7 +700,6 @@
struct ufs_super_block_first * usb1;
struct ufs_cylinder_group * ucg;
u64 result, blkno;
- int ret;
UFSD("ENTER, goal %llu\n", (unsigned long long)goal);
@@ -752,11 +733,6 @@
ubh_clrblock (UCPI_UBH(ucpi), ucpi->c_freeoff, blkno);
if ((UFS_SB(sb)->s_flags & UFS_CG_MASK) == UFS_CG_44BSD)
ufs_clusteracct (sb, ucpi, blkno, -1);
- ret = dquot_alloc_block(inode, uspi->s_fpb);
- if (ret) {
- *err = ret;
- return INVBLOCK;
- }
fs32_sub(sb, &ucg->cg_cs.cs_nbfree, 1);
uspi->cs_total.cs_nbfree--;
diff --git a/fs/ufs/dir.c b/fs/ufs/dir.c
index 317a0d4..ec78475 100644
--- a/fs/ufs/dir.c
+++ b/fs/ufs/dir.c
@@ -666,6 +666,6 @@
const struct file_operations ufs_dir_operations = {
.read = generic_read_dir,
.readdir = ufs_readdir,
- .fsync = simple_fsync,
+ .fsync = generic_file_fsync,
.llseek = generic_file_llseek,
};
diff --git a/fs/ufs/file.c b/fs/ufs/file.c
index a8962ce..33afa20 100644
--- a/fs/ufs/file.c
+++ b/fs/ufs/file.c
@@ -24,7 +24,6 @@
*/
#include <linux/fs.h>
-#include <linux/quotaops.h>
#include "ufs_fs.h"
#include "ufs.h"
@@ -41,7 +40,7 @@
.write = do_sync_write,
.aio_write = generic_file_aio_write,
.mmap = generic_file_mmap,
- .open = dquot_file_open,
- .fsync = simple_fsync,
+ .open = generic_file_open,
+ .fsync = generic_file_fsync,
.splice_read = generic_file_splice_read,
};
diff --git a/fs/ufs/ialloc.c b/fs/ufs/ialloc.c
index 3a959d5..594480e 100644
--- a/fs/ufs/ialloc.c
+++ b/fs/ufs/ialloc.c
@@ -27,7 +27,6 @@
#include <linux/time.h>
#include <linux/stat.h>
#include <linux/string.h>
-#include <linux/quotaops.h>
#include <linux/buffer_head.h>
#include <linux/sched.h>
#include <linux/bitops.h>
@@ -95,9 +94,6 @@
is_directory = S_ISDIR(inode->i_mode);
- dquot_free_inode(inode);
- dquot_drop(inode);
-
clear_inode (inode);
if (ubh_isclr (UCPI_UBH(ucpi), ucpi->c_iusedoff, bit))
@@ -347,21 +343,12 @@
unlock_super (sb);
- dquot_initialize(inode);
- err = dquot_alloc_inode(inode);
- if (err) {
- dquot_drop(inode);
- goto fail_without_unlock;
- }
-
UFSD("allocating inode %lu\n", inode->i_ino);
UFSD("EXIT\n");
return inode;
fail_remove_inode:
unlock_super(sb);
-fail_without_unlock:
- inode->i_flags |= S_NOQUOTA;
inode->i_nlink = 0;
iput(inode);
UFSD("EXIT (FAILED): err %d\n", err);
diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c
index cffa756..73fe773 100644
--- a/fs/ufs/inode.c
+++ b/fs/ufs/inode.c
@@ -37,7 +37,6 @@
#include <linux/smp_lock.h>
#include <linux/buffer_head.h>
#include <linux/writeback.h>
-#include <linux/quotaops.h>
#include "ufs_fs.h"
#include "ufs.h"
@@ -910,9 +909,6 @@
{
loff_t old_i_size;
- if (!is_bad_inode(inode))
- dquot_initialize(inode);
-
truncate_inode_pages(&inode->i_data, 0);
if (is_bad_inode(inode))
goto no_delete;
diff --git a/fs/ufs/namei.c b/fs/ufs/namei.c
index eabc02e..b056f02 100644
--- a/fs/ufs/namei.c
+++ b/fs/ufs/namei.c
@@ -30,7 +30,6 @@
#include <linux/time.h>
#include <linux/fs.h>
#include <linux/smp_lock.h>
-#include <linux/quotaops.h>
#include "ufs_fs.h"
#include "ufs.h"
@@ -86,8 +85,6 @@
UFSD("BEGIN\n");
- dquot_initialize(dir);
-
inode = ufs_new_inode(dir, mode);
err = PTR_ERR(inode);
@@ -112,8 +109,6 @@
if (!old_valid_dev(rdev))
return -EINVAL;
- dquot_initialize(dir);
-
inode = ufs_new_inode(dir, mode);
err = PTR_ERR(inode);
if (!IS_ERR(inode)) {
@@ -138,8 +133,6 @@
if (l > sb->s_blocksize)
goto out_notlocked;
- dquot_initialize(dir);
-
lock_kernel();
inode = ufs_new_inode(dir, S_IFLNK | S_IRWXUGO);
err = PTR_ERR(inode);
@@ -185,8 +178,6 @@
return -EMLINK;
}
- dquot_initialize(dir);
-
inode->i_ctime = CURRENT_TIME_SEC;
inode_inc_link_count(inode);
atomic_inc(&inode->i_count);
@@ -204,8 +195,6 @@
if (dir->i_nlink >= UFS_LINK_MAX)
goto out;
- dquot_initialize(dir);
-
lock_kernel();
inode_inc_link_count(dir);
@@ -250,8 +239,6 @@
struct page *page;
int err = -ENOENT;
- dquot_initialize(dir);
-
de = ufs_find_entry(dir, &dentry->d_name, &page);
if (!de)
goto out;
@@ -296,9 +283,6 @@
struct ufs_dir_entry *old_de;
int err = -ENOENT;
- dquot_initialize(old_dir);
- dquot_initialize(new_dir);
-
old_de = ufs_find_entry(old_dir, &old_dentry->d_name, &old_page);
if (!old_de)
goto out;
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index 14743d9..3ec5a9e 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -77,7 +77,6 @@
#include <linux/errno.h>
#include <linux/fs.h>
-#include <linux/quotaops.h>
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/stat.h>
@@ -918,6 +917,7 @@
sbi->s_bytesex = BYTESEX_LE;
switch ((uspi->fs_magic = fs32_to_cpu(sb, usb3->fs_magic))) {
case UFS_MAGIC:
+ case UFS_MAGIC_BW:
case UFS2_MAGIC:
case UFS_MAGIC_LFN:
case UFS_MAGIC_FEA:
@@ -927,6 +927,7 @@
sbi->s_bytesex = BYTESEX_BE;
switch ((uspi->fs_magic = fs32_to_cpu(sb, usb3->fs_magic))) {
case UFS_MAGIC:
+ case UFS_MAGIC_BW:
case UFS2_MAGIC:
case UFS_MAGIC_LFN:
case UFS_MAGIC_FEA:
@@ -1045,7 +1046,7 @@
*/
sb->s_op = &ufs_super_ops;
sb->s_export_op = &ufs_export_ops;
- sb->dq_op = NULL; /***/
+
sb->s_magic = fs32_to_cpu(sb, usb3->fs_magic);
uspi->s_sblkno = fs32_to_cpu(sb, usb1->fs_sblkno);
@@ -1435,126 +1436,19 @@
kmem_cache_destroy(ufs_inode_cachep);
}
-static void ufs_clear_inode(struct inode *inode)
-{
- dquot_drop(inode);
-}
-
-#ifdef CONFIG_QUOTA
-static ssize_t ufs_quota_read(struct super_block *, int, char *,size_t, loff_t);
-static ssize_t ufs_quota_write(struct super_block *, int, const char *, size_t, loff_t);
-#endif
-
static const struct super_operations ufs_super_ops = {
.alloc_inode = ufs_alloc_inode,
.destroy_inode = ufs_destroy_inode,
.write_inode = ufs_write_inode,
.delete_inode = ufs_delete_inode,
- .clear_inode = ufs_clear_inode,
.put_super = ufs_put_super,
.write_super = ufs_write_super,
.sync_fs = ufs_sync_fs,
.statfs = ufs_statfs,
.remount_fs = ufs_remount,
.show_options = ufs_show_options,
-#ifdef CONFIG_QUOTA
- .quota_read = ufs_quota_read,
- .quota_write = ufs_quota_write,
-#endif
};
-#ifdef CONFIG_QUOTA
-
-/* Read data from quotafile - avoid pagecache and such because we cannot afford
- * acquiring the locks... As quota files are never truncated and quota code
- * itself serializes the operations (and noone else should touch the files)
- * we don't have to be afraid of races */
-static ssize_t ufs_quota_read(struct super_block *sb, int type, char *data,
- size_t len, loff_t off)
-{
- struct inode *inode = sb_dqopt(sb)->files[type];
- sector_t blk = off >> sb->s_blocksize_bits;
- int err = 0;
- int offset = off & (sb->s_blocksize - 1);
- int tocopy;
- size_t toread;
- struct buffer_head *bh;
- loff_t i_size = i_size_read(inode);
-
- if (off > i_size)
- return 0;
- if (off+len > i_size)
- len = i_size-off;
- toread = len;
- while (toread > 0) {
- tocopy = sb->s_blocksize - offset < toread ?
- sb->s_blocksize - offset : toread;
-
- bh = ufs_bread(inode, blk, 0, &err);
- if (err)
- return err;
- if (!bh) /* A hole? */
- memset(data, 0, tocopy);
- else {
- memcpy(data, bh->b_data+offset, tocopy);
- brelse(bh);
- }
- offset = 0;
- toread -= tocopy;
- data += tocopy;
- blk++;
- }
- return len;
-}
-
-/* Write to quotafile */
-static ssize_t ufs_quota_write(struct super_block *sb, int type,
- const char *data, size_t len, loff_t off)
-{
- struct inode *inode = sb_dqopt(sb)->files[type];
- sector_t blk = off >> sb->s_blocksize_bits;
- int err = 0;
- int offset = off & (sb->s_blocksize - 1);
- int tocopy;
- size_t towrite = len;
- struct buffer_head *bh;
-
- mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA);
- while (towrite > 0) {
- tocopy = sb->s_blocksize - offset < towrite ?
- sb->s_blocksize - offset : towrite;
-
- bh = ufs_bread(inode, blk, 1, &err);
- if (!bh)
- goto out;
- lock_buffer(bh);
- memcpy(bh->b_data+offset, data, tocopy);
- flush_dcache_page(bh->b_page);
- set_buffer_uptodate(bh);
- mark_buffer_dirty(bh);
- unlock_buffer(bh);
- brelse(bh);
- offset = 0;
- towrite -= tocopy;
- data += tocopy;
- blk++;
- }
-out:
- if (len == towrite) {
- mutex_unlock(&inode->i_mutex);
- return err;
- }
- if (inode->i_size < off+len-towrite)
- i_size_write(inode, off+len-towrite);
- inode->i_version++;
- inode->i_mtime = inode->i_ctime = CURRENT_TIME_SEC;
- mark_inode_dirty(inode);
- mutex_unlock(&inode->i_mutex);
- return len - towrite;
-}
-
-#endif
-
static int ufs_get_sb(struct file_system_type *fs_type,
int flags, const char *dev_name, void *data, struct vfsmount *mnt)
{
diff --git a/fs/ufs/truncate.c b/fs/ufs/truncate.c
index f294c44..589e01a 100644
--- a/fs/ufs/truncate.c
+++ b/fs/ufs/truncate.c
@@ -44,7 +44,6 @@
#include <linux/buffer_head.h>
#include <linux/blkdev.h>
#include <linux/sched.h>
-#include <linux/quotaops.h>
#include "ufs_fs.h"
#include "ufs.h"
@@ -501,12 +500,10 @@
return err;
}
-
/*
- * We don't define our `inode->i_op->truncate', and call it here,
- * because of:
- * - there is no way to know old size
- * - there is no way inform user about error, if it happens in `truncate'
+ * TODO:
+ * - truncate case should use proper ordering instead of using
+ * simple_setsize
*/
int ufs_setattr(struct dentry *dentry, struct iattr *attr)
{
@@ -518,19 +515,10 @@
if (error)
return error;
- if (is_quota_modification(inode, attr))
- dquot_initialize(inode);
-
- if ((ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) ||
- (ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid)) {
- error = dquot_transfer(inode, attr);
- if (error)
- return error;
- }
if (ia_valid & ATTR_SIZE && attr->ia_size != inode->i_size) {
loff_t old_i_size = inode->i_size;
- error = vmtruncate(inode, attr->ia_size);
+ error = simple_setsize(inode, attr->ia_size);
if (error)
return error;
error = ufs_truncate(inode, old_i_size);
diff --git a/fs/ufs/ufs_fs.h b/fs/ufs/ufs_fs.h
index 6943ec6..8aba544 100644
--- a/fs/ufs/ufs_fs.h
+++ b/fs/ufs/ufs_fs.h
@@ -48,6 +48,7 @@
#define UFS_SECTOR_SIZE 512
#define UFS_SECTOR_BITS 9
#define UFS_MAGIC 0x00011954
+#define UFS_MAGIC_BW 0x0f242697
#define UFS2_MAGIC 0x19540119
#define UFS_CIGAM 0x54190100 /* byteswapped MAGIC */
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index 089eaca..34640d6 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -1333,6 +1333,21 @@
trace_xfs_writepage(inode, page, 0);
/*
+ * Refuse to write the page out if we are called from reclaim context.
+ *
+ * This is primarily to avoid stack overflows when called from deep
+ * used stacks in random callers for direct reclaim, but disabling
+ * reclaim for kswap is a nice side-effect as kswapd causes rather
+ * suboptimal I/O patters, too.
+ *
+ * This should really be done by the core VM, but until that happens
+ * filesystems like XFS, btrfs and ext4 have to take care of this
+ * by themselves.
+ */
+ if (current->flags & PF_MEMALLOC)
+ goto out_fail;
+
+ /*
* We need a transaction if:
* 1. There are delalloc buffers on the page
* 2. The page is uptodate and we have unmapped buffers
@@ -1366,14 +1381,6 @@
if (!page_has_buffers(page))
create_empty_buffers(page, 1 << inode->i_blkbits, 0);
-
- /*
- * VM calculation for nr_to_write seems off. Bump it way
- * up, this gets simple streaming writes zippy again.
- * To be reviewed again after Jens' writeback changes.
- */
- wbc->nr_to_write *= 4;
-
/*
* Convert delayed allocate, unwritten or unmapped space
* to real space and flush out to disk.
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index 649ade8..2ee3f7a 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -45,7 +45,7 @@
static kmem_zone_t *xfs_buf_zone;
STATIC int xfsbufd(void *);
-STATIC int xfsbufd_wakeup(int, gfp_t);
+STATIC int xfsbufd_wakeup(struct shrinker *, int, gfp_t);
STATIC void xfs_buf_delwri_queue(xfs_buf_t *, int);
static struct shrinker xfs_buf_shake = {
.shrink = xfsbufd_wakeup,
@@ -340,7 +340,7 @@
__func__, gfp_mask);
XFS_STATS_INC(xb_page_retries);
- xfsbufd_wakeup(0, gfp_mask);
+ xfsbufd_wakeup(NULL, 0, gfp_mask);
congestion_wait(BLK_RW_ASYNC, HZ/50);
goto retry;
}
@@ -1762,6 +1762,7 @@
STATIC int
xfsbufd_wakeup(
+ struct shrinker *shrink,
int priority,
gfp_t mask)
{
diff --git a/fs/xfs/linux-2.6/xfs_export.c b/fs/xfs/linux-2.6/xfs_export.c
index 846b75a..e7839ee 100644
--- a/fs/xfs/linux-2.6/xfs_export.c
+++ b/fs/xfs/linux-2.6/xfs_export.c
@@ -128,13 +128,12 @@
return ERR_PTR(-ESTALE);
/*
- * The XFS_IGET_BULKSTAT means that an invalid inode number is just
- * fine and not an indication of a corrupted filesystem. Because
- * clients can send any kind of invalid file handle, e.g. after
- * a restore on the server we have to deal with this case gracefully.
+ * The XFS_IGET_UNTRUSTED means that an invalid inode number is just
+ * fine and not an indication of a corrupted filesystem as clients can
+ * send invalid file handles and we have to handle it gracefully..
*/
- error = xfs_iget(mp, NULL, ino, XFS_IGET_BULKSTAT,
- XFS_ILOCK_SHARED, &ip, 0);
+ error = xfs_iget(mp, NULL, ino, XFS_IGET_UNTRUSTED,
+ XFS_ILOCK_SHARED, &ip);
if (error) {
/*
* EINVAL means the inode cluster doesn't exist anymore.
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index d8fb1b5..257a56b 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -100,10 +100,10 @@
STATIC int
xfs_file_fsync(
struct file *file,
- struct dentry *dentry,
int datasync)
{
- struct xfs_inode *ip = XFS_I(dentry->d_inode);
+ struct inode *inode = file->f_mapping->host;
+ struct xfs_inode *ip = XFS_I(inode);
struct xfs_trans *tp;
int error = 0;
int log_flushed = 0;
@@ -140,8 +140,8 @@
* might gets cleared when the inode gets written out via the AIL
* or xfs_iflush_cluster.
*/
- if (((dentry->d_inode->i_state & I_DIRTY_DATASYNC) ||
- ((dentry->d_inode->i_state & I_DIRTY_SYNC) && !datasync)) &&
+ if (((inode->i_state & I_DIRTY_DATASYNC) ||
+ ((inode->i_state & I_DIRTY_SYNC) && !datasync)) &&
ip->i_update_core) {
/*
* Kick off a transaction to log the inode core to get the
@@ -868,7 +868,7 @@
mutex_lock(&inode->i_mutex);
xfs_ilock(ip, iolock);
- error2 = -xfs_file_fsync(file, file->f_path.dentry,
+ error2 = -xfs_file_fsync(file,
(file->f_flags & __O_SYNC) ? 0 : 1);
if (!error)
error = error2;
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index 699b60c..e59a810 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -679,10 +679,9 @@
error = xfs_bulkstat_single(mp, &inlast,
bulkreq.ubuffer, &done);
else /* XFS_IOC_FSBULKSTAT */
- error = xfs_bulkstat(mp, &inlast, &count,
- (bulkstat_one_pf)xfs_bulkstat_one, NULL,
- sizeof(xfs_bstat_t), bulkreq.ubuffer,
- BULKSTAT_FG_QUICK, &done);
+ error = xfs_bulkstat(mp, &inlast, &count, xfs_bulkstat_one,
+ sizeof(xfs_bstat_t), bulkreq.ubuffer,
+ &done);
if (error)
return -error;
diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/linux-2.6/xfs_ioctl32.c
index 9287135..52ed49e 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl32.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl32.c
@@ -237,15 +237,12 @@
xfs_ino_t ino, /* inode number to get data for */
void __user *buffer, /* buffer to place output in */
int ubsize, /* size of buffer */
- void *private_data, /* my private data */
- xfs_daddr_t bno, /* starting bno of inode cluster */
int *ubused, /* bytes used by me */
- void *dibuff, /* on-disk inode buffer */
int *stat) /* BULKSTAT_RV_... */
{
return xfs_bulkstat_one_int(mp, ino, buffer, ubsize,
- xfs_bulkstat_one_fmt_compat, bno,
- ubused, dibuff, stat);
+ xfs_bulkstat_one_fmt_compat,
+ ubused, stat);
}
/* copied from xfs_ioctl.c */
@@ -298,13 +295,11 @@
int res;
error = xfs_bulkstat_one_compat(mp, inlast, bulkreq.ubuffer,
- sizeof(compat_xfs_bstat_t),
- NULL, 0, NULL, NULL, &res);
+ sizeof(compat_xfs_bstat_t), 0, &res);
} else if (cmd == XFS_IOC_FSBULKSTAT_32) {
error = xfs_bulkstat(mp, &inlast, &count,
- xfs_bulkstat_one_compat, NULL,
- sizeof(compat_xfs_bstat_t), bulkreq.ubuffer,
- BULKSTAT_FG_QUICK, &done);
+ xfs_bulkstat_one_compat, sizeof(compat_xfs_bstat_t),
+ bulkreq.ubuffer, &done);
} else
error = XFS_ERROR(EINVAL);
if (error)
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 9c8019c..44f0b2d 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -585,11 +585,20 @@
bf.l_len = len;
xfs_ilock(ip, XFS_IOLOCK_EXCL);
+
+ /* check the new inode size is valid before allocating */
+ if (!(mode & FALLOC_FL_KEEP_SIZE) &&
+ offset + len > i_size_read(inode)) {
+ new_size = offset + len;
+ error = inode_newsize_ok(inode, new_size);
+ if (error)
+ goto out_unlock;
+ }
+
error = -xfs_change_file_space(ip, XFS_IOC_RESVSP, &bf,
0, XFS_ATTR_NOLOCK);
- if (!error && !(mode & FALLOC_FL_KEEP_SIZE) &&
- offset + len > i_size_read(inode))
- new_size = offset + len;
+ if (error)
+ goto out_unlock;
/* Change file size if needed */
if (new_size) {
@@ -600,6 +609,7 @@
error = -xfs_setattr(ip, &iattr, XFS_ATTR_NOLOCK);
}
+out_unlock:
xfs_iunlock(ip, XFS_IOLOCK_EXCL);
out_error:
return error;
diff --git a/fs/xfs/linux-2.6/xfs_quotaops.c b/fs/xfs/linux-2.6/xfs_quotaops.c
index 9ac8aea..067cafb 100644
--- a/fs/xfs/linux-2.6/xfs_quotaops.c
+++ b/fs/xfs/linux-2.6/xfs_quotaops.c
@@ -23,7 +23,6 @@
#include "xfs_ag.h"
#include "xfs_mount.h"
#include "xfs_quota.h"
-#include "xfs_log.h"
#include "xfs_trans.h"
#include "xfs_bmap_btree.h"
#include "xfs_inode.h"
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index f2d1718..80938c7 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -1883,7 +1883,6 @@
goto out_cleanup_procfs;
vfs_initquota();
- xfs_inode_shrinker_init();
error = register_filesystem(&xfs_fs_type);
if (error)
@@ -1911,7 +1910,6 @@
{
vfs_exitquota();
unregister_filesystem(&xfs_fs_type);
- xfs_inode_shrinker_destroy();
xfs_sysctl_unregister();
xfs_cleanup_procfs();
xfs_buf_terminate();
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index 3884e20..a51a07c 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -144,6 +144,41 @@
return last_error;
}
+/*
+ * Select the next per-ag structure to iterate during the walk. The reclaim
+ * walk is optimised only to walk AGs with reclaimable inodes in them.
+ */
+static struct xfs_perag *
+xfs_inode_ag_iter_next_pag(
+ struct xfs_mount *mp,
+ xfs_agnumber_t *first,
+ int tag)
+{
+ struct xfs_perag *pag = NULL;
+
+ if (tag == XFS_ICI_RECLAIM_TAG) {
+ int found;
+ int ref;
+
+ spin_lock(&mp->m_perag_lock);
+ found = radix_tree_gang_lookup_tag(&mp->m_perag_tree,
+ (void **)&pag, *first, 1, tag);
+ if (found <= 0) {
+ spin_unlock(&mp->m_perag_lock);
+ return NULL;
+ }
+ *first = pag->pag_agno + 1;
+ /* open coded pag reference increment */
+ ref = atomic_inc_return(&pag->pag_ref);
+ spin_unlock(&mp->m_perag_lock);
+ trace_xfs_perag_get_reclaim(mp, pag->pag_agno, ref, _RET_IP_);
+ } else {
+ pag = xfs_perag_get(mp, *first);
+ (*first)++;
+ }
+ return pag;
+}
+
int
xfs_inode_ag_iterator(
struct xfs_mount *mp,
@@ -154,20 +189,15 @@
int exclusive,
int *nr_to_scan)
{
+ struct xfs_perag *pag;
int error = 0;
int last_error = 0;
xfs_agnumber_t ag;
int nr;
nr = nr_to_scan ? *nr_to_scan : INT_MAX;
- for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) {
- struct xfs_perag *pag;
-
- pag = xfs_perag_get(mp, ag);
- if (!pag->pag_ici_init) {
- xfs_perag_put(pag);
- continue;
- }
+ ag = 0;
+ while ((pag = xfs_inode_ag_iter_next_pag(mp, &ag, tag))) {
error = xfs_inode_ag_walk(mp, pag, execute, flags, tag,
exclusive, &nr);
xfs_perag_put(pag);
@@ -644,6 +674,17 @@
radix_tree_tag_set(&pag->pag_ici_root,
XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino),
XFS_ICI_RECLAIM_TAG);
+
+ if (!pag->pag_ici_reclaimable) {
+ /* propagate the reclaim tag up into the perag radix tree */
+ spin_lock(&ip->i_mount->m_perag_lock);
+ radix_tree_tag_set(&ip->i_mount->m_perag_tree,
+ XFS_INO_TO_AGNO(ip->i_mount, ip->i_ino),
+ XFS_ICI_RECLAIM_TAG);
+ spin_unlock(&ip->i_mount->m_perag_lock);
+ trace_xfs_perag_set_reclaim(ip->i_mount, pag->pag_agno,
+ -1, _RET_IP_);
+ }
pag->pag_ici_reclaimable++;
}
@@ -678,6 +719,16 @@
radix_tree_tag_clear(&pag->pag_ici_root,
XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG);
pag->pag_ici_reclaimable--;
+ if (!pag->pag_ici_reclaimable) {
+ /* clear the reclaim tag from the perag radix tree */
+ spin_lock(&ip->i_mount->m_perag_lock);
+ radix_tree_tag_clear(&ip->i_mount->m_perag_tree,
+ XFS_INO_TO_AGNO(ip->i_mount, ip->i_ino),
+ XFS_ICI_RECLAIM_TAG);
+ spin_unlock(&ip->i_mount->m_perag_lock);
+ trace_xfs_perag_clear_reclaim(ip->i_mount, pag->pag_agno,
+ -1, _RET_IP_);
+ }
}
/*
@@ -832,88 +883,52 @@
/*
* Shrinker infrastructure.
- *
- * This is all far more complex than it needs to be. It adds a global list of
- * mounts because the shrinkers can only call a global context. We need to make
- * the shrinkers pass a context to avoid the need for global state.
*/
-static LIST_HEAD(xfs_mount_list);
-static struct rw_semaphore xfs_mount_list_lock;
-
static int
xfs_reclaim_inode_shrink(
+ struct shrinker *shrink,
int nr_to_scan,
gfp_t gfp_mask)
{
struct xfs_mount *mp;
struct xfs_perag *pag;
xfs_agnumber_t ag;
- int reclaimable = 0;
+ int reclaimable;
+ mp = container_of(shrink, struct xfs_mount, m_inode_shrink);
if (nr_to_scan) {
if (!(gfp_mask & __GFP_FS))
return -1;
- down_read(&xfs_mount_list_lock);
- list_for_each_entry(mp, &xfs_mount_list, m_mplist) {
- xfs_inode_ag_iterator(mp, xfs_reclaim_inode, 0,
+ xfs_inode_ag_iterator(mp, xfs_reclaim_inode, 0,
XFS_ICI_RECLAIM_TAG, 1, &nr_to_scan);
- if (nr_to_scan <= 0)
- break;
- }
- up_read(&xfs_mount_list_lock);
- }
+ /* if we don't exhaust the scan, don't bother coming back */
+ if (nr_to_scan > 0)
+ return -1;
+ }
- down_read(&xfs_mount_list_lock);
- list_for_each_entry(mp, &xfs_mount_list, m_mplist) {
- for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) {
-
- pag = xfs_perag_get(mp, ag);
- if (!pag->pag_ici_init) {
- xfs_perag_put(pag);
- continue;
- }
- reclaimable += pag->pag_ici_reclaimable;
- xfs_perag_put(pag);
- }
+ reclaimable = 0;
+ ag = 0;
+ while ((pag = xfs_inode_ag_iter_next_pag(mp, &ag,
+ XFS_ICI_RECLAIM_TAG))) {
+ reclaimable += pag->pag_ici_reclaimable;
+ xfs_perag_put(pag);
}
- up_read(&xfs_mount_list_lock);
return reclaimable;
}
-static struct shrinker xfs_inode_shrinker = {
- .shrink = xfs_reclaim_inode_shrink,
- .seeks = DEFAULT_SEEKS,
-};
-
-void __init
-xfs_inode_shrinker_init(void)
-{
- init_rwsem(&xfs_mount_list_lock);
- register_shrinker(&xfs_inode_shrinker);
-}
-
-void
-xfs_inode_shrinker_destroy(void)
-{
- ASSERT(list_empty(&xfs_mount_list));
- unregister_shrinker(&xfs_inode_shrinker);
-}
-
void
xfs_inode_shrinker_register(
struct xfs_mount *mp)
{
- down_write(&xfs_mount_list_lock);
- list_add_tail(&mp->m_mplist, &xfs_mount_list);
- up_write(&xfs_mount_list_lock);
+ mp->m_inode_shrink.shrink = xfs_reclaim_inode_shrink;
+ mp->m_inode_shrink.seeks = DEFAULT_SEEKS;
+ register_shrinker(&mp->m_inode_shrink);
}
void
xfs_inode_shrinker_unregister(
struct xfs_mount *mp)
{
- down_write(&xfs_mount_list_lock);
- list_del(&mp->m_mplist);
- up_write(&xfs_mount_list_lock);
+ unregister_shrinker(&mp->m_inode_shrink);
}
diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h
index cdcbaac..e28139a 100644
--- a/fs/xfs/linux-2.6/xfs_sync.h
+++ b/fs/xfs/linux-2.6/xfs_sync.h
@@ -55,8 +55,6 @@
int (*execute)(struct xfs_inode *ip, struct xfs_perag *pag, int flags),
int flags, int tag, int write_lock, int *nr_to_scan);
-void xfs_inode_shrinker_init(void);
-void xfs_inode_shrinker_destroy(void);
void xfs_inode_shrinker_register(struct xfs_mount *mp);
void xfs_inode_shrinker_unregister(struct xfs_mount *mp);
diff --git a/fs/xfs/linux-2.6/xfs_trace.c b/fs/xfs/linux-2.6/xfs_trace.c
index 207fa77..d12be84 100644
--- a/fs/xfs/linux-2.6/xfs_trace.c
+++ b/fs/xfs/linux-2.6/xfs_trace.c
@@ -50,7 +50,6 @@
#include "quota/xfs_dquot_item.h"
#include "quota/xfs_dquot.h"
#include "xfs_log_recover.h"
-#include "xfs_buf_item.h"
#include "xfs_inode_item.h"
/*
diff --git a/fs/xfs/linux-2.6/xfs_trace.h b/fs/xfs/linux-2.6/xfs_trace.h
index ff6bc79..3028206 100644
--- a/fs/xfs/linux-2.6/xfs_trace.h
+++ b/fs/xfs/linux-2.6/xfs_trace.h
@@ -82,33 +82,6 @@
)
)
-#define DEFINE_PERAG_REF_EVENT(name) \
-TRACE_EVENT(name, \
- TP_PROTO(struct xfs_mount *mp, xfs_agnumber_t agno, int refcount, \
- unsigned long caller_ip), \
- TP_ARGS(mp, agno, refcount, caller_ip), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_agnumber_t, agno) \
- __field(int, refcount) \
- __field(unsigned long, caller_ip) \
- ), \
- TP_fast_assign( \
- __entry->dev = mp->m_super->s_dev; \
- __entry->agno = agno; \
- __entry->refcount = refcount; \
- __entry->caller_ip = caller_ip; \
- ), \
- TP_printk("dev %d:%d agno %u refcount %d caller %pf", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->agno, \
- __entry->refcount, \
- (char *)__entry->caller_ip) \
-);
-
-DEFINE_PERAG_REF_EVENT(xfs_perag_get)
-DEFINE_PERAG_REF_EVENT(xfs_perag_put)
-
#define DEFINE_ATTR_LIST_EVENT(name) \
DEFINE_EVENT(xfs_attr_list_class, name, \
TP_PROTO(struct xfs_attr_list_context *ctx), \
@@ -122,6 +95,40 @@
DEFINE_ATTR_LIST_EVENT(xfs_attr_list_wrong_blk);
DEFINE_ATTR_LIST_EVENT(xfs_attr_list_notfound);
+DECLARE_EVENT_CLASS(xfs_perag_class,
+ TP_PROTO(struct xfs_mount *mp, xfs_agnumber_t agno, int refcount,
+ unsigned long caller_ip),
+ TP_ARGS(mp, agno, refcount, caller_ip),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_agnumber_t, agno)
+ __field(int, refcount)
+ __field(unsigned long, caller_ip)
+ ),
+ TP_fast_assign(
+ __entry->dev = mp->m_super->s_dev;
+ __entry->agno = agno;
+ __entry->refcount = refcount;
+ __entry->caller_ip = caller_ip;
+ ),
+ TP_printk("dev %d:%d agno %u refcount %d caller %pf",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->agno,
+ __entry->refcount,
+ (char *)__entry->caller_ip)
+);
+
+#define DEFINE_PERAG_REF_EVENT(name) \
+DEFINE_EVENT(xfs_perag_class, name, \
+ TP_PROTO(struct xfs_mount *mp, xfs_agnumber_t agno, int refcount, \
+ unsigned long caller_ip), \
+ TP_ARGS(mp, agno, refcount, caller_ip))
+DEFINE_PERAG_REF_EVENT(xfs_perag_get);
+DEFINE_PERAG_REF_EVENT(xfs_perag_get_reclaim);
+DEFINE_PERAG_REF_EVENT(xfs_perag_put);
+DEFINE_PERAG_REF_EVENT(xfs_perag_set_reclaim);
+DEFINE_PERAG_REF_EVENT(xfs_perag_clear_reclaim);
+
TRACE_EVENT(xfs_attr_list_node_descend,
TP_PROTO(struct xfs_attr_list_context *ctx,
struct xfs_da_node_entry *btree),
@@ -775,165 +782,181 @@
DEFINE_LOGGRANT_EVENT(xfs_log_ungrant_exit);
DEFINE_LOGGRANT_EVENT(xfs_log_ungrant_sub);
-#define DEFINE_RW_EVENT(name) \
-TRACE_EVENT(name, \
- TP_PROTO(struct xfs_inode *ip, size_t count, loff_t offset, int flags), \
- TP_ARGS(ip, count, offset, flags), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_ino_t, ino) \
- __field(xfs_fsize_t, size) \
- __field(xfs_fsize_t, new_size) \
- __field(loff_t, offset) \
- __field(size_t, count) \
- __field(int, flags) \
- ), \
- TP_fast_assign( \
- __entry->dev = VFS_I(ip)->i_sb->s_dev; \
- __entry->ino = ip->i_ino; \
- __entry->size = ip->i_d.di_size; \
- __entry->new_size = ip->i_new_size; \
- __entry->offset = offset; \
- __entry->count = count; \
- __entry->flags = flags; \
- ), \
- TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx " \
- "offset 0x%llx count 0x%zx ioflags %s", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->ino, \
- __entry->size, \
- __entry->new_size, \
- __entry->offset, \
- __entry->count, \
- __print_flags(__entry->flags, "|", XFS_IO_FLAGS)) \
+DECLARE_EVENT_CLASS(xfs_file_class,
+ TP_PROTO(struct xfs_inode *ip, size_t count, loff_t offset, int flags),
+ TP_ARGS(ip, count, offset, flags),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ __field(xfs_fsize_t, size)
+ __field(xfs_fsize_t, new_size)
+ __field(loff_t, offset)
+ __field(size_t, count)
+ __field(int, flags)
+ ),
+ TP_fast_assign(
+ __entry->dev = VFS_I(ip)->i_sb->s_dev;
+ __entry->ino = ip->i_ino;
+ __entry->size = ip->i_d.di_size;
+ __entry->new_size = ip->i_new_size;
+ __entry->offset = offset;
+ __entry->count = count;
+ __entry->flags = flags;
+ ),
+ TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx "
+ "offset 0x%llx count 0x%zx ioflags %s",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino,
+ __entry->size,
+ __entry->new_size,
+ __entry->offset,
+ __entry->count,
+ __print_flags(__entry->flags, "|", XFS_IO_FLAGS))
)
+
+#define DEFINE_RW_EVENT(name) \
+DEFINE_EVENT(xfs_file_class, name, \
+ TP_PROTO(struct xfs_inode *ip, size_t count, loff_t offset, int flags), \
+ TP_ARGS(ip, count, offset, flags))
DEFINE_RW_EVENT(xfs_file_read);
DEFINE_RW_EVENT(xfs_file_buffered_write);
DEFINE_RW_EVENT(xfs_file_direct_write);
DEFINE_RW_EVENT(xfs_file_splice_read);
DEFINE_RW_EVENT(xfs_file_splice_write);
+DECLARE_EVENT_CLASS(xfs_page_class,
+ TP_PROTO(struct inode *inode, struct page *page, unsigned long off),
+ TP_ARGS(inode, page, off),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ __field(pgoff_t, pgoff)
+ __field(loff_t, size)
+ __field(unsigned long, offset)
+ __field(int, delalloc)
+ __field(int, unmapped)
+ __field(int, unwritten)
+ ),
+ TP_fast_assign(
+ int delalloc = -1, unmapped = -1, unwritten = -1;
-#define DEFINE_PAGE_EVENT(name) \
-TRACE_EVENT(name, \
- TP_PROTO(struct inode *inode, struct page *page, unsigned long off), \
- TP_ARGS(inode, page, off), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_ino_t, ino) \
- __field(pgoff_t, pgoff) \
- __field(loff_t, size) \
- __field(unsigned long, offset) \
- __field(int, delalloc) \
- __field(int, unmapped) \
- __field(int, unwritten) \
- ), \
- TP_fast_assign( \
- int delalloc = -1, unmapped = -1, unwritten = -1; \
- \
- if (page_has_buffers(page)) \
- xfs_count_page_state(page, &delalloc, \
- &unmapped, &unwritten); \
- __entry->dev = inode->i_sb->s_dev; \
- __entry->ino = XFS_I(inode)->i_ino; \
- __entry->pgoff = page_offset(page); \
- __entry->size = i_size_read(inode); \
- __entry->offset = off; \
- __entry->delalloc = delalloc; \
- __entry->unmapped = unmapped; \
- __entry->unwritten = unwritten; \
- ), \
- TP_printk("dev %d:%d ino 0x%llx pgoff 0x%lx size 0x%llx offset %lx " \
- "delalloc %d unmapped %d unwritten %d", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->ino, \
- __entry->pgoff, \
- __entry->size, \
- __entry->offset, \
- __entry->delalloc, \
- __entry->unmapped, \
- __entry->unwritten) \
+ if (page_has_buffers(page))
+ xfs_count_page_state(page, &delalloc,
+ &unmapped, &unwritten);
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->ino = XFS_I(inode)->i_ino;
+ __entry->pgoff = page_offset(page);
+ __entry->size = i_size_read(inode);
+ __entry->offset = off;
+ __entry->delalloc = delalloc;
+ __entry->unmapped = unmapped;
+ __entry->unwritten = unwritten;
+ ),
+ TP_printk("dev %d:%d ino 0x%llx pgoff 0x%lx size 0x%llx offset %lx "
+ "delalloc %d unmapped %d unwritten %d",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino,
+ __entry->pgoff,
+ __entry->size,
+ __entry->offset,
+ __entry->delalloc,
+ __entry->unmapped,
+ __entry->unwritten)
)
+
+#define DEFINE_PAGE_EVENT(name) \
+DEFINE_EVENT(xfs_page_class, name, \
+ TP_PROTO(struct inode *inode, struct page *page, unsigned long off), \
+ TP_ARGS(inode, page, off))
DEFINE_PAGE_EVENT(xfs_writepage);
DEFINE_PAGE_EVENT(xfs_releasepage);
DEFINE_PAGE_EVENT(xfs_invalidatepage);
-#define DEFINE_IOMAP_EVENT(name) \
-TRACE_EVENT(name, \
- TP_PROTO(struct xfs_inode *ip, xfs_off_t offset, ssize_t count, \
- int flags, struct xfs_bmbt_irec *irec), \
- TP_ARGS(ip, offset, count, flags, irec), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_ino_t, ino) \
- __field(loff_t, size) \
- __field(loff_t, new_size) \
- __field(loff_t, offset) \
- __field(size_t, count) \
- __field(int, flags) \
- __field(xfs_fileoff_t, startoff) \
- __field(xfs_fsblock_t, startblock) \
- __field(xfs_filblks_t, blockcount) \
- ), \
- TP_fast_assign( \
- __entry->dev = VFS_I(ip)->i_sb->s_dev; \
- __entry->ino = ip->i_ino; \
- __entry->size = ip->i_d.di_size; \
- __entry->new_size = ip->i_new_size; \
- __entry->offset = offset; \
- __entry->count = count; \
- __entry->flags = flags; \
- __entry->startoff = irec ? irec->br_startoff : 0; \
- __entry->startblock = irec ? irec->br_startblock : 0; \
- __entry->blockcount = irec ? irec->br_blockcount : 0; \
- ), \
- TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx " \
- "offset 0x%llx count %zd flags %s " \
- "startoff 0x%llx startblock %lld blockcount 0x%llx", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->ino, \
- __entry->size, \
- __entry->new_size, \
- __entry->offset, \
- __entry->count, \
- __print_flags(__entry->flags, "|", BMAPI_FLAGS), \
- __entry->startoff, \
- (__int64_t)__entry->startblock, \
- __entry->blockcount) \
+DECLARE_EVENT_CLASS(xfs_iomap_class,
+ TP_PROTO(struct xfs_inode *ip, xfs_off_t offset, ssize_t count,
+ int flags, struct xfs_bmbt_irec *irec),
+ TP_ARGS(ip, offset, count, flags, irec),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ __field(loff_t, size)
+ __field(loff_t, new_size)
+ __field(loff_t, offset)
+ __field(size_t, count)
+ __field(int, flags)
+ __field(xfs_fileoff_t, startoff)
+ __field(xfs_fsblock_t, startblock)
+ __field(xfs_filblks_t, blockcount)
+ ),
+ TP_fast_assign(
+ __entry->dev = VFS_I(ip)->i_sb->s_dev;
+ __entry->ino = ip->i_ino;
+ __entry->size = ip->i_d.di_size;
+ __entry->new_size = ip->i_new_size;
+ __entry->offset = offset;
+ __entry->count = count;
+ __entry->flags = flags;
+ __entry->startoff = irec ? irec->br_startoff : 0;
+ __entry->startblock = irec ? irec->br_startblock : 0;
+ __entry->blockcount = irec ? irec->br_blockcount : 0;
+ ),
+ TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx "
+ "offset 0x%llx count %zd flags %s "
+ "startoff 0x%llx startblock %lld blockcount 0x%llx",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino,
+ __entry->size,
+ __entry->new_size,
+ __entry->offset,
+ __entry->count,
+ __print_flags(__entry->flags, "|", BMAPI_FLAGS),
+ __entry->startoff,
+ (__int64_t)__entry->startblock,
+ __entry->blockcount)
)
+
+#define DEFINE_IOMAP_EVENT(name) \
+DEFINE_EVENT(xfs_iomap_class, name, \
+ TP_PROTO(struct xfs_inode *ip, xfs_off_t offset, ssize_t count, \
+ int flags, struct xfs_bmbt_irec *irec), \
+ TP_ARGS(ip, offset, count, flags, irec))
DEFINE_IOMAP_EVENT(xfs_iomap_enter);
DEFINE_IOMAP_EVENT(xfs_iomap_found);
DEFINE_IOMAP_EVENT(xfs_iomap_alloc);
-#define DEFINE_SIMPLE_IO_EVENT(name) \
-TRACE_EVENT(name, \
- TP_PROTO(struct xfs_inode *ip, xfs_off_t offset, ssize_t count), \
- TP_ARGS(ip, offset, count), \
- TP_STRUCT__entry( \
- __field(dev_t, dev) \
- __field(xfs_ino_t, ino) \
- __field(loff_t, size) \
- __field(loff_t, new_size) \
- __field(loff_t, offset) \
- __field(size_t, count) \
- ), \
- TP_fast_assign( \
- __entry->dev = VFS_I(ip)->i_sb->s_dev; \
- __entry->ino = ip->i_ino; \
- __entry->size = ip->i_d.di_size; \
- __entry->new_size = ip->i_new_size; \
- __entry->offset = offset; \
- __entry->count = count; \
- ), \
- TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx " \
- "offset 0x%llx count %zd", \
- MAJOR(__entry->dev), MINOR(__entry->dev), \
- __entry->ino, \
- __entry->size, \
- __entry->new_size, \
- __entry->offset, \
- __entry->count) \
+DECLARE_EVENT_CLASS(xfs_simple_io_class,
+ TP_PROTO(struct xfs_inode *ip, xfs_off_t offset, ssize_t count),
+ TP_ARGS(ip, offset, count),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ __field(loff_t, size)
+ __field(loff_t, new_size)
+ __field(loff_t, offset)
+ __field(size_t, count)
+ ),
+ TP_fast_assign(
+ __entry->dev = VFS_I(ip)->i_sb->s_dev;
+ __entry->ino = ip->i_ino;
+ __entry->size = ip->i_d.di_size;
+ __entry->new_size = ip->i_new_size;
+ __entry->offset = offset;
+ __entry->count = count;
+ ),
+ TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx "
+ "offset 0x%llx count %zd",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino,
+ __entry->size,
+ __entry->new_size,
+ __entry->offset,
+ __entry->count)
);
+
+#define DEFINE_SIMPLE_IO_EVENT(name) \
+DEFINE_EVENT(xfs_simple_io_class, name, \
+ TP_PROTO(struct xfs_inode *ip, xfs_off_t offset, ssize_t count), \
+ TP_ARGS(ip, offset, count))
DEFINE_SIMPLE_IO_EVENT(xfs_delalloc_enospc);
DEFINE_SIMPLE_IO_EVENT(xfs_unwritten_convert);
diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c
index 38e7641..67c0183 100644
--- a/fs/xfs/quota/xfs_qm.c
+++ b/fs/xfs/quota/xfs_qm.c
@@ -69,7 +69,7 @@
STATIC int xfs_qm_init_quotainos(xfs_mount_t *);
STATIC int xfs_qm_init_quotainfo(xfs_mount_t *);
-STATIC int xfs_qm_shake(int, gfp_t);
+STATIC int xfs_qm_shake(struct shrinker *, int, gfp_t);
static struct shrinker xfs_qm_shaker = {
.shrink = xfs_qm_shake,
@@ -249,8 +249,10 @@
if (!xfs_Gqm) {
xfs_Gqm = xfs_Gqm_init();
- if (!xfs_Gqm)
+ if (!xfs_Gqm) {
+ mutex_unlock(&xfs_Gqm_lock);
return ENOMEM;
+ }
}
/*
@@ -1630,10 +1632,7 @@
xfs_ino_t ino, /* inode number to get data for */
void __user *buffer, /* not used */
int ubsize, /* not used */
- void *private_data, /* not used */
- xfs_daddr_t bno, /* starting block of inode cluster */
int *ubused, /* not used */
- void *dip, /* on-disk inode pointer (not used) */
int *res) /* result code value */
{
xfs_inode_t *ip;
@@ -1658,7 +1657,7 @@
* the case in all other instances. It's OK that we do this because
* quotacheck is done only at mount time.
*/
- if ((error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_EXCL, &ip, bno))) {
+ if ((error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_EXCL, &ip))) {
*res = BULKSTAT_RV_NOTHING;
return error;
}
@@ -1794,12 +1793,13 @@
* Iterate thru all the inodes in the file system,
* adjusting the corresponding dquot counters in core.
*/
- if ((error = xfs_bulkstat(mp, &lastino, &count,
- xfs_qm_dqusage_adjust, NULL,
- structsz, NULL, BULKSTAT_FG_IGET, &done)))
+ error = xfs_bulkstat(mp, &lastino, &count,
+ xfs_qm_dqusage_adjust,
+ structsz, NULL, &done);
+ if (error)
break;
- } while (! done);
+ } while (!done);
/*
* We've made all the changes that we need to make incore.
@@ -1887,14 +1887,14 @@
mp->m_sb.sb_uquotino != NULLFSINO) {
ASSERT(mp->m_sb.sb_uquotino > 0);
if ((error = xfs_iget(mp, NULL, mp->m_sb.sb_uquotino,
- 0, 0, &uip, 0)))
+ 0, 0, &uip)))
return XFS_ERROR(error);
}
if (XFS_IS_OQUOTA_ON(mp) &&
mp->m_sb.sb_gquotino != NULLFSINO) {
ASSERT(mp->m_sb.sb_gquotino > 0);
if ((error = xfs_iget(mp, NULL, mp->m_sb.sb_gquotino,
- 0, 0, &gip, 0))) {
+ 0, 0, &gip))) {
if (uip)
IRELE(uip);
return XFS_ERROR(error);
@@ -2117,7 +2117,10 @@
*/
/* ARGSUSED */
STATIC int
-xfs_qm_shake(int nr_to_scan, gfp_t gfp_mask)
+xfs_qm_shake(
+ struct shrinker *shrink,
+ int nr_to_scan,
+ gfp_t gfp_mask)
{
int ndqused, nfree, n;
diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c
index 92b002f..b448776 100644
--- a/fs/xfs/quota/xfs_qm_syscalls.c
+++ b/fs/xfs/quota/xfs_qm_syscalls.c
@@ -262,7 +262,7 @@
}
if ((flags & XFS_DQ_USER) && mp->m_sb.sb_uquotino != NULLFSINO) {
- error = xfs_iget(mp, NULL, mp->m_sb.sb_uquotino, 0, 0, &qip, 0);
+ error = xfs_iget(mp, NULL, mp->m_sb.sb_uquotino, 0, 0, &qip);
if (!error) {
error = xfs_truncate_file(mp, qip);
IRELE(qip);
@@ -271,7 +271,7 @@
if ((flags & (XFS_DQ_GROUP|XFS_DQ_PROJ)) &&
mp->m_sb.sb_gquotino != NULLFSINO) {
- error2 = xfs_iget(mp, NULL, mp->m_sb.sb_gquotino, 0, 0, &qip, 0);
+ error2 = xfs_iget(mp, NULL, mp->m_sb.sb_gquotino, 0, 0, &qip);
if (!error2) {
error2 = xfs_truncate_file(mp, qip);
IRELE(qip);
@@ -417,12 +417,12 @@
}
if (!uip && mp->m_sb.sb_uquotino != NULLFSINO) {
if (xfs_iget(mp, NULL, mp->m_sb.sb_uquotino,
- 0, 0, &uip, 0) == 0)
+ 0, 0, &uip) == 0)
tempuqip = B_TRUE;
}
if (!gip && mp->m_sb.sb_gquotino != NULLFSINO) {
if (xfs_iget(mp, NULL, mp->m_sb.sb_gquotino,
- 0, 0, &gip, 0) == 0)
+ 0, 0, &gip) == 0)
tempgqip = B_TRUE;
}
if (uip) {
@@ -1109,10 +1109,7 @@
xfs_ino_t ino, /* inode number to get data for */
void __user *buffer, /* not used */
int ubsize, /* not used */
- void *private_data, /* not used */
- xfs_daddr_t bno, /* starting block of inode cluster */
int *ubused, /* not used */
- void *dip, /* not used */
int *res) /* bulkstat result code */
{
xfs_inode_t *ip;
@@ -1134,7 +1131,7 @@
ipreleased = B_FALSE;
again:
lock_flags = XFS_ILOCK_SHARED;
- if ((error = xfs_iget(mp, NULL, ino, 0, lock_flags, &ip, bno))) {
+ if ((error = xfs_iget(mp, NULL, ino, 0, lock_flags, &ip))) {
*res = BULKSTAT_RV_NOTHING;
return (error);
}
@@ -1205,15 +1202,15 @@
* Iterate thru all the inodes in the file system,
* adjusting the corresponding dquot counters
*/
- if ((error = xfs_bulkstat(mp, &lastino, &count,
- xfs_qm_internalqcheck_adjust, NULL,
- 0, NULL, BULKSTAT_FG_IGET, &done))) {
+ error = xfs_bulkstat(mp, &lastino, &count,
+ xfs_qm_internalqcheck_adjust,
+ 0, NULL, &done);
+ if (error) {
+ cmn_err(CE_DEBUG, "Bulkstat returned error 0x%x", error);
break;
}
- } while (! done);
- if (error) {
- cmn_err(CE_DEBUG, "Bulkstat returned error 0x%x", error);
- }
+ } while (!done);
+
cmn_err(CE_DEBUG, "Checking results against system dquots");
for (i = 0; i < qmtest_hashmask; i++) {
xfs_dqtest_t *d, *n;
diff --git a/fs/xfs/xfs_ag.h b/fs/xfs/xfs_ag.h
index 401f364..4917d4e 100644
--- a/fs/xfs/xfs_ag.h
+++ b/fs/xfs/xfs_ag.h
@@ -227,7 +227,6 @@
atomic_t pagf_fstrms; /* # of filestreams active in this AG */
- int pag_ici_init; /* incore inode cache initialised */
rwlock_t pag_ici_lock; /* incore inode lock */
struct radix_tree_root pag_ici_root; /* incore inode cache root */
int pag_ici_reclaimable; /* reclaimable inodes */
diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c
index 5bba29a..7f159d2 100644
--- a/fs/xfs/xfs_dfrag.c
+++ b/fs/xfs/xfs_dfrag.c
@@ -69,7 +69,9 @@
goto out;
}
- if (!(file->f_mode & FMODE_WRITE) || (file->f_flags & O_APPEND)) {
+ if (!(file->f_mode & FMODE_WRITE) ||
+ !(file->f_mode & FMODE_READ) ||
+ (file->f_flags & O_APPEND)) {
error = XFS_ERROR(EBADF);
goto out_put_file;
}
@@ -81,6 +83,7 @@
}
if (!(tmp_file->f_mode & FMODE_WRITE) ||
+ !(tmp_file->f_mode & FMODE_READ) ||
(tmp_file->f_flags & O_APPEND)) {
error = XFS_ERROR(EBADF);
goto out_put_tmp_file;
diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c
index 9d884c1..c7142a0 100644
--- a/fs/xfs/xfs_ialloc.c
+++ b/fs/xfs/xfs_ialloc.c
@@ -1203,6 +1203,63 @@
return error;
}
+STATIC int
+xfs_imap_lookup(
+ struct xfs_mount *mp,
+ struct xfs_trans *tp,
+ xfs_agnumber_t agno,
+ xfs_agino_t agino,
+ xfs_agblock_t agbno,
+ xfs_agblock_t *chunk_agbno,
+ xfs_agblock_t *offset_agbno,
+ int flags)
+{
+ struct xfs_inobt_rec_incore rec;
+ struct xfs_btree_cur *cur;
+ struct xfs_buf *agbp;
+ xfs_agino_t startino;
+ int error;
+ int i;
+
+ error = xfs_ialloc_read_agi(mp, tp, agno, &agbp);
+ if (error) {
+ xfs_fs_cmn_err(CE_ALERT, mp, "xfs_imap: "
+ "xfs_ialloc_read_agi() returned "
+ "error %d, agno %d",
+ error, agno);
+ return error;
+ }
+
+ /*
+ * derive and lookup the exact inode record for the given agino. If the
+ * record cannot be found, then it's an invalid inode number and we
+ * should abort.
+ */
+ cur = xfs_inobt_init_cursor(mp, tp, agbp, agno);
+ startino = agino & ~(XFS_IALLOC_INODES(mp) - 1);
+ error = xfs_inobt_lookup(cur, startino, XFS_LOOKUP_EQ, &i);
+ if (!error) {
+ if (i)
+ error = xfs_inobt_get_rec(cur, &rec, &i);
+ if (!error && i == 0)
+ error = EINVAL;
+ }
+
+ xfs_trans_brelse(tp, agbp);
+ xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR);
+ if (error)
+ return error;
+
+ /* for untrusted inodes check it is allocated first */
+ if ((flags & XFS_IGET_UNTRUSTED) &&
+ (rec.ir_free & XFS_INOBT_MASK(agino - rec.ir_startino)))
+ return EINVAL;
+
+ *chunk_agbno = XFS_AGINO_TO_AGBNO(mp, rec.ir_startino);
+ *offset_agbno = agbno - *chunk_agbno;
+ return 0;
+}
+
/*
* Return the location of the inode in imap, for mapping it into a buffer.
*/
@@ -1235,8 +1292,11 @@
if (agno >= mp->m_sb.sb_agcount || agbno >= mp->m_sb.sb_agblocks ||
ino != XFS_AGINO_TO_INO(mp, agno, agino)) {
#ifdef DEBUG
- /* no diagnostics for bulkstat, ino comes from userspace */
- if (flags & XFS_IGET_BULKSTAT)
+ /*
+ * Don't output diagnostic information for untrusted inodes
+ * as they can be invalid without implying corruption.
+ */
+ if (flags & XFS_IGET_UNTRUSTED)
return XFS_ERROR(EINVAL);
if (agno >= mp->m_sb.sb_agcount) {
xfs_fs_cmn_err(CE_ALERT, mp,
@@ -1263,6 +1323,23 @@
return XFS_ERROR(EINVAL);
}
+ blks_per_cluster = XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_blocklog;
+
+ /*
+ * For bulkstat and handle lookups, we have an untrusted inode number
+ * that we have to verify is valid. We cannot do this just by reading
+ * the inode buffer as it may have been unlinked and removed leaving
+ * inodes in stale state on disk. Hence we have to do a btree lookup
+ * in all cases where an untrusted inode number is passed.
+ */
+ if (flags & XFS_IGET_UNTRUSTED) {
+ error = xfs_imap_lookup(mp, tp, agno, agino, agbno,
+ &chunk_agbno, &offset_agbno, flags);
+ if (error)
+ return error;
+ goto out_map;
+ }
+
/*
* If the inode cluster size is the same as the blocksize or
* smaller we get to the buffer by simple arithmetics.
@@ -1277,24 +1354,6 @@
return 0;
}
- blks_per_cluster = XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_blocklog;
-
- /*
- * If we get a block number passed from bulkstat we can use it to
- * find the buffer easily.
- */
- if (imap->im_blkno) {
- offset = XFS_INO_TO_OFFSET(mp, ino);
- ASSERT(offset < mp->m_sb.sb_inopblock);
-
- cluster_agbno = xfs_daddr_to_agbno(mp, imap->im_blkno);
- offset += (agbno - cluster_agbno) * mp->m_sb.sb_inopblock;
-
- imap->im_len = XFS_FSB_TO_BB(mp, blks_per_cluster);
- imap->im_boffset = (ushort)(offset << mp->m_sb.sb_inodelog);
- return 0;
- }
-
/*
* If the inode chunks are aligned then use simple maths to
* find the location. Otherwise we have to do a btree
@@ -1304,50 +1363,13 @@
offset_agbno = agbno & mp->m_inoalign_mask;
chunk_agbno = agbno - offset_agbno;
} else {
- xfs_btree_cur_t *cur; /* inode btree cursor */
- xfs_inobt_rec_incore_t chunk_rec;
- xfs_buf_t *agbp; /* agi buffer */
- int i; /* temp state */
-
- error = xfs_ialloc_read_agi(mp, tp, agno, &agbp);
- if (error) {
- xfs_fs_cmn_err(CE_ALERT, mp, "xfs_imap: "
- "xfs_ialloc_read_agi() returned "
- "error %d, agno %d",
- error, agno);
- return error;
- }
-
- cur = xfs_inobt_init_cursor(mp, tp, agbp, agno);
- error = xfs_inobt_lookup(cur, agino, XFS_LOOKUP_LE, &i);
- if (error) {
- xfs_fs_cmn_err(CE_ALERT, mp, "xfs_imap: "
- "xfs_inobt_lookup() failed");
- goto error0;
- }
-
- error = xfs_inobt_get_rec(cur, &chunk_rec, &i);
- if (error) {
- xfs_fs_cmn_err(CE_ALERT, mp, "xfs_imap: "
- "xfs_inobt_get_rec() failed");
- goto error0;
- }
- if (i == 0) {
-#ifdef DEBUG
- xfs_fs_cmn_err(CE_ALERT, mp, "xfs_imap: "
- "xfs_inobt_get_rec() failed");
-#endif /* DEBUG */
- error = XFS_ERROR(EINVAL);
- }
- error0:
- xfs_trans_brelse(tp, agbp);
- xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR);
+ error = xfs_imap_lookup(mp, tp, agno, agino, agbno,
+ &chunk_agbno, &offset_agbno, flags);
if (error)
return error;
- chunk_agbno = XFS_AGINO_TO_AGBNO(mp, chunk_rec.ir_startino);
- offset_agbno = agbno - chunk_agbno;
}
+out_map:
ASSERT(agbno >= chunk_agbno);
cluster_agbno = chunk_agbno +
((offset_agbno / blks_per_cluster) * blks_per_cluster);
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index 6845db9..8f8b91b 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -259,7 +259,6 @@
xfs_trans_t *tp,
xfs_ino_t ino,
struct xfs_inode **ipp,
- xfs_daddr_t bno,
int flags,
int lock_flags)
{
@@ -272,7 +271,7 @@
if (!ip)
return ENOMEM;
- error = xfs_iread(mp, tp, ip, bno, flags);
+ error = xfs_iread(mp, tp, ip, flags);
if (error)
goto out_destroy;
@@ -358,8 +357,6 @@
* within the file system for the inode being requested.
* lock_flags -- flags indicating how to lock the inode. See the comment
* for xfs_ilock() for a list of valid values.
- * bno -- the block number starting the buffer containing the inode,
- * if known (as by bulkstat), else 0.
*/
int
xfs_iget(
@@ -368,8 +365,7 @@
xfs_ino_t ino,
uint flags,
uint lock_flags,
- xfs_inode_t **ipp,
- xfs_daddr_t bno)
+ xfs_inode_t **ipp)
{
xfs_inode_t *ip;
int error;
@@ -382,9 +378,6 @@
/* get the perag structure and ensure that it's inode capable */
pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ino));
- if (!pag->pagi_inodeok)
- return EINVAL;
- ASSERT(pag->pag_ici_init);
agino = XFS_INO_TO_AGINO(mp, ino);
again:
@@ -400,7 +393,7 @@
read_unlock(&pag->pag_ici_lock);
XFS_STATS_INC(xs_ig_missed);
- error = xfs_iget_cache_miss(mp, pag, tp, ino, &ip, bno,
+ error = xfs_iget_cache_miss(mp, pag, tp, ino, &ip,
flags, lock_flags);
if (error)
goto out_error_or_again;
@@ -744,30 +737,24 @@
}
#ifdef DEBUG
-/*
- * Debug-only routine, without additional rw_semaphore APIs, we can
- * now only answer requests regarding whether we hold the lock for write
- * (reader state is outside our visibility, we only track writer state).
- *
- * Note: this means !xfs_isilocked would give false positives, so don't do that.
- */
int
xfs_isilocked(
xfs_inode_t *ip,
uint lock_flags)
{
- if ((lock_flags & (XFS_ILOCK_EXCL|XFS_ILOCK_SHARED)) ==
- XFS_ILOCK_EXCL) {
- if (!ip->i_lock.mr_writer)
- return 0;
+ if (lock_flags & (XFS_ILOCK_EXCL|XFS_ILOCK_SHARED)) {
+ if (!(lock_flags & XFS_ILOCK_SHARED))
+ return !!ip->i_lock.mr_writer;
+ return rwsem_is_locked(&ip->i_lock.mr_lock);
}
- if ((lock_flags & (XFS_IOLOCK_EXCL|XFS_IOLOCK_SHARED)) ==
- XFS_IOLOCK_EXCL) {
- if (!ip->i_iolock.mr_writer)
- return 0;
+ if (lock_flags & (XFS_IOLOCK_EXCL|XFS_IOLOCK_SHARED)) {
+ if (!(lock_flags & XFS_IOLOCK_SHARED))
+ return !!ip->i_iolock.mr_writer;
+ return rwsem_is_locked(&ip->i_iolock.mr_lock);
}
- return 1;
+ ASSERT(0);
+ return 0;
}
#endif
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index 8cd6e8d..b76a829 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -177,7 +177,7 @@
if (unlikely(XFS_TEST_ERROR(!di_ok, mp,
XFS_ERRTAG_ITOBP_INOTOBP,
XFS_RANDOM_ITOBP_INOTOBP))) {
- if (iget_flags & XFS_IGET_BULKSTAT) {
+ if (iget_flags & XFS_IGET_UNTRUSTED) {
xfs_trans_brelse(tp, bp);
return XFS_ERROR(EINVAL);
}
@@ -787,7 +787,6 @@
xfs_mount_t *mp,
xfs_trans_t *tp,
xfs_inode_t *ip,
- xfs_daddr_t bno,
uint iget_flags)
{
xfs_buf_t *bp;
@@ -797,11 +796,9 @@
/*
* Fill in the location information in the in-core inode.
*/
- ip->i_imap.im_blkno = bno;
error = xfs_imap(mp, tp, ip->i_ino, &ip->i_imap, iget_flags);
if (error)
return error;
- ASSERT(bno == 0 || bno == ip->i_imap.im_blkno);
/*
* Get pointers to the on-disk inode and the buffer containing it.
@@ -1940,10 +1937,10 @@
int blks_per_cluster;
int nbufs;
int ninodes;
- int i, j, found, pre_flushed;
+ int i, j;
xfs_daddr_t blkno;
xfs_buf_t *bp;
- xfs_inode_t *ip, **ip_found;
+ xfs_inode_t *ip;
xfs_inode_log_item_t *iip;
xfs_log_item_t *lip;
struct xfs_perag *pag;
@@ -1960,89 +1957,29 @@
nbufs = XFS_IALLOC_BLOCKS(mp) / blks_per_cluster;
}
- ip_found = kmem_alloc(ninodes * sizeof(xfs_inode_t *), KM_NOFS);
-
for (j = 0; j < nbufs; j++, inum += ninodes) {
+ int found = 0;
+
blkno = XFS_AGB_TO_DADDR(mp, XFS_INO_TO_AGNO(mp, inum),
XFS_INO_TO_AGBNO(mp, inum));
-
/*
- * Look for each inode in memory and attempt to lock it,
- * we can be racing with flush and tail pushing here.
- * any inode we get the locks on, add to an array of
- * inode items to process later.
- *
- * The get the buffer lock, we could beat a flush
- * or tail pushing thread to the lock here, in which
- * case they will go looking for the inode buffer
- * and fail, we need some other form of interlock
- * here.
+ * We obtain and lock the backing buffer first in the process
+ * here, as we have to ensure that any dirty inode that we
+ * can't get the flush lock on is attached to the buffer.
+ * If we scan the in-memory inodes first, then buffer IO can
+ * complete before we get a lock on it, and hence we may fail
+ * to mark all the active inodes on the buffer stale.
*/
- found = 0;
- for (i = 0; i < ninodes; i++) {
- read_lock(&pag->pag_ici_lock);
- ip = radix_tree_lookup(&pag->pag_ici_root,
- XFS_INO_TO_AGINO(mp, (inum + i)));
-
- /* Inode not in memory or we found it already,
- * nothing to do
- */
- if (!ip || xfs_iflags_test(ip, XFS_ISTALE)) {
- read_unlock(&pag->pag_ici_lock);
- continue;
- }
-
- if (xfs_inode_clean(ip)) {
- read_unlock(&pag->pag_ici_lock);
- continue;
- }
-
- /* If we can get the locks then add it to the
- * list, otherwise by the time we get the bp lock
- * below it will already be attached to the
- * inode buffer.
- */
-
- /* This inode will already be locked - by us, lets
- * keep it that way.
- */
-
- if (ip == free_ip) {
- if (xfs_iflock_nowait(ip)) {
- xfs_iflags_set(ip, XFS_ISTALE);
- if (xfs_inode_clean(ip)) {
- xfs_ifunlock(ip);
- } else {
- ip_found[found++] = ip;
- }
- }
- read_unlock(&pag->pag_ici_lock);
- continue;
- }
-
- if (xfs_ilock_nowait(ip, XFS_ILOCK_EXCL)) {
- if (xfs_iflock_nowait(ip)) {
- xfs_iflags_set(ip, XFS_ISTALE);
-
- if (xfs_inode_clean(ip)) {
- xfs_ifunlock(ip);
- xfs_iunlock(ip, XFS_ILOCK_EXCL);
- } else {
- ip_found[found++] = ip;
- }
- } else {
- xfs_iunlock(ip, XFS_ILOCK_EXCL);
- }
- }
- read_unlock(&pag->pag_ici_lock);
- }
-
- bp = xfs_trans_get_buf(tp, mp->m_ddev_targp, blkno,
+ bp = xfs_trans_get_buf(tp, mp->m_ddev_targp, blkno,
mp->m_bsize * blks_per_cluster,
XBF_LOCK);
- pre_flushed = 0;
+ /*
+ * Walk the inodes already attached to the buffer and mark them
+ * stale. These will all have the flush locks held, so an
+ * in-memory inode walk can't lock them.
+ */
lip = XFS_BUF_FSPRIVATE(bp, xfs_log_item_t *);
while (lip) {
if (lip->li_type == XFS_LI_INODE) {
@@ -2053,21 +1990,64 @@
&iip->ili_flush_lsn,
&iip->ili_item.li_lsn);
xfs_iflags_set(iip->ili_inode, XFS_ISTALE);
- pre_flushed++;
+ found++;
}
lip = lip->li_bio_list;
}
- for (i = 0; i < found; i++) {
- ip = ip_found[i];
- iip = ip->i_itemp;
+ /*
+ * For each inode in memory attempt to add it to the inode
+ * buffer and set it up for being staled on buffer IO
+ * completion. This is safe as we've locked out tail pushing
+ * and flushing by locking the buffer.
+ *
+ * We have already marked every inode that was part of a
+ * transaction stale above, which means there is no point in
+ * even trying to lock them.
+ */
+ for (i = 0; i < ninodes; i++) {
+ read_lock(&pag->pag_ici_lock);
+ ip = radix_tree_lookup(&pag->pag_ici_root,
+ XFS_INO_TO_AGINO(mp, (inum + i)));
+ /* Inode not in memory or stale, nothing to do */
+ if (!ip || xfs_iflags_test(ip, XFS_ISTALE)) {
+ read_unlock(&pag->pag_ici_lock);
+ continue;
+ }
+
+ /* don't try to lock/unlock the current inode */
+ if (ip != free_ip &&
+ !xfs_ilock_nowait(ip, XFS_ILOCK_EXCL)) {
+ read_unlock(&pag->pag_ici_lock);
+ continue;
+ }
+ read_unlock(&pag->pag_ici_lock);
+
+ if (!xfs_iflock_nowait(ip)) {
+ if (ip != free_ip)
+ xfs_iunlock(ip, XFS_ILOCK_EXCL);
+ continue;
+ }
+
+ xfs_iflags_set(ip, XFS_ISTALE);
+ if (xfs_inode_clean(ip)) {
+ ASSERT(ip != free_ip);
+ xfs_ifunlock(ip);
+ xfs_iunlock(ip, XFS_ILOCK_EXCL);
+ continue;
+ }
+
+ iip = ip->i_itemp;
if (!iip) {
+ /* inode with unlogged changes only */
+ ASSERT(ip != free_ip);
ip->i_update_core = 0;
xfs_ifunlock(ip);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
continue;
}
+ found++;
iip->ili_last_fields = iip->ili_format.ilf_fields;
iip->ili_format.ilf_fields = 0;
@@ -2078,17 +2058,16 @@
xfs_buf_attach_iodone(bp,
(void(*)(xfs_buf_t*,xfs_log_item_t*))
xfs_istale_done, (xfs_log_item_t *)iip);
- if (ip != free_ip) {
+
+ if (ip != free_ip)
xfs_iunlock(ip, XFS_ILOCK_EXCL);
- }
}
- if (found || pre_flushed)
+ if (found)
xfs_trans_stale_inode_buf(tp, bp);
xfs_trans_binval(tp, bp);
}
- kmem_free(ip_found);
xfs_perag_put(pag);
}
@@ -2649,8 +2628,6 @@
int i;
pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ip->i_ino));
- ASSERT(pag->pagi_inodeok);
- ASSERT(pag->pag_ici_init);
inodes_per_cluster = XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog;
ilist_size = inodes_per_cluster * sizeof(xfs_inode_t *);
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index 9965e40..78550df 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -442,7 +442,7 @@
* xfs_iget.c prototypes.
*/
int xfs_iget(struct xfs_mount *, struct xfs_trans *, xfs_ino_t,
- uint, uint, xfs_inode_t **, xfs_daddr_t);
+ uint, uint, xfs_inode_t **);
void xfs_iput(xfs_inode_t *, uint);
void xfs_iput_new(xfs_inode_t *, uint);
void xfs_ilock(xfs_inode_t *, uint);
@@ -500,7 +500,7 @@
* Flags for xfs_iget()
*/
#define XFS_IGET_CREATE 0x1
-#define XFS_IGET_BULKSTAT 0x2
+#define XFS_IGET_UNTRUSTED 0x2
int xfs_inotobp(struct xfs_mount *, struct xfs_trans *,
xfs_ino_t, struct xfs_dinode **,
@@ -509,7 +509,7 @@
struct xfs_inode *, struct xfs_dinode **,
struct xfs_buf **, uint);
int xfs_iread(struct xfs_mount *, struct xfs_trans *,
- struct xfs_inode *, xfs_daddr_t, uint);
+ struct xfs_inode *, uint);
void xfs_dinode_to_disk(struct xfs_dinode *,
struct xfs_icdinode *);
void xfs_idestroy_fork(struct xfs_inode *, int);
diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c
index b1b801e..2b86f86 100644
--- a/fs/xfs/xfs_itable.c
+++ b/fs/xfs/xfs_itable.c
@@ -49,24 +49,40 @@
(ino == mp->m_sb.sb_uquotino || ino == mp->m_sb.sb_gquotino)));
}
-STATIC int
-xfs_bulkstat_one_iget(
- xfs_mount_t *mp, /* mount point for filesystem */
- xfs_ino_t ino, /* inode number to get data for */
- xfs_daddr_t bno, /* starting bno of inode cluster */
- xfs_bstat_t *buf, /* return buffer */
- int *stat) /* BULKSTAT_RV_... */
+/*
+ * Return stat information for one inode.
+ * Return 0 if ok, else errno.
+ */
+int
+xfs_bulkstat_one_int(
+ struct xfs_mount *mp, /* mount point for filesystem */
+ xfs_ino_t ino, /* inode to get data for */
+ void __user *buffer, /* buffer to place output in */
+ int ubsize, /* size of buffer */
+ bulkstat_one_fmt_pf formatter, /* formatter, copy to user */
+ int *ubused, /* bytes used by me */
+ int *stat) /* BULKSTAT_RV_... */
{
- xfs_icdinode_t *dic; /* dinode core info pointer */
- xfs_inode_t *ip; /* incore inode pointer */
- struct inode *inode;
- int error;
+ struct xfs_icdinode *dic; /* dinode core info pointer */
+ struct xfs_inode *ip; /* incore inode pointer */
+ struct inode *inode;
+ struct xfs_bstat *buf; /* return buffer */
+ int error = 0; /* error value */
+
+ *stat = BULKSTAT_RV_NOTHING;
+
+ if (!buffer || xfs_internal_inum(mp, ino))
+ return XFS_ERROR(EINVAL);
+
+ buf = kmem_alloc(sizeof(*buf), KM_SLEEP | KM_MAYFAIL);
+ if (!buf)
+ return XFS_ERROR(ENOMEM);
error = xfs_iget(mp, NULL, ino,
- XFS_IGET_BULKSTAT, XFS_ILOCK_SHARED, &ip, bno);
+ XFS_IGET_UNTRUSTED, XFS_ILOCK_SHARED, &ip);
if (error) {
*stat = BULKSTAT_RV_NOTHING;
- return error;
+ goto out_free;
}
ASSERT(ip != NULL);
@@ -127,79 +143,18 @@
buf->bs_blocks = dic->di_nblocks + ip->i_delayed_blks;
break;
}
-
xfs_iput(ip, XFS_ILOCK_SHARED);
+
+ error = formatter(buffer, ubsize, ubused, buf);
+
+ if (!error)
+ *stat = BULKSTAT_RV_DIDONE;
+
+ out_free:
+ kmem_free(buf);
return error;
}
-STATIC void
-xfs_bulkstat_one_dinode(
- xfs_mount_t *mp, /* mount point for filesystem */
- xfs_ino_t ino, /* inode number to get data for */
- xfs_dinode_t *dic, /* dinode inode pointer */
- xfs_bstat_t *buf) /* return buffer */
-{
- /*
- * The inode format changed when we moved the link count and
- * made it 32 bits long. If this is an old format inode,
- * convert it in memory to look like a new one. If it gets
- * flushed to disk we will convert back before flushing or
- * logging it. We zero out the new projid field and the old link
- * count field. We'll handle clearing the pad field (the remains
- * of the old uuid field) when we actually convert the inode to
- * the new format. We don't change the version number so that we
- * can distinguish this from a real new format inode.
- */
- if (dic->di_version == 1) {
- buf->bs_nlink = be16_to_cpu(dic->di_onlink);
- buf->bs_projid = 0;
- } else {
- buf->bs_nlink = be32_to_cpu(dic->di_nlink);
- buf->bs_projid = be16_to_cpu(dic->di_projid);
- }
-
- buf->bs_ino = ino;
- buf->bs_mode = be16_to_cpu(dic->di_mode);
- buf->bs_uid = be32_to_cpu(dic->di_uid);
- buf->bs_gid = be32_to_cpu(dic->di_gid);
- buf->bs_size = be64_to_cpu(dic->di_size);
- buf->bs_atime.tv_sec = be32_to_cpu(dic->di_atime.t_sec);
- buf->bs_atime.tv_nsec = be32_to_cpu(dic->di_atime.t_nsec);
- buf->bs_mtime.tv_sec = be32_to_cpu(dic->di_mtime.t_sec);
- buf->bs_mtime.tv_nsec = be32_to_cpu(dic->di_mtime.t_nsec);
- buf->bs_ctime.tv_sec = be32_to_cpu(dic->di_ctime.t_sec);
- buf->bs_ctime.tv_nsec = be32_to_cpu(dic->di_ctime.t_nsec);
- buf->bs_xflags = xfs_dic2xflags(dic);
- buf->bs_extsize = be32_to_cpu(dic->di_extsize) << mp->m_sb.sb_blocklog;
- buf->bs_extents = be32_to_cpu(dic->di_nextents);
- buf->bs_gen = be32_to_cpu(dic->di_gen);
- memset(buf->bs_pad, 0, sizeof(buf->bs_pad));
- buf->bs_dmevmask = be32_to_cpu(dic->di_dmevmask);
- buf->bs_dmstate = be16_to_cpu(dic->di_dmstate);
- buf->bs_aextents = be16_to_cpu(dic->di_anextents);
- buf->bs_forkoff = XFS_DFORK_BOFF(dic);
-
- switch (dic->di_format) {
- case XFS_DINODE_FMT_DEV:
- buf->bs_rdev = xfs_dinode_get_rdev(dic);
- buf->bs_blksize = BLKDEV_IOSIZE;
- buf->bs_blocks = 0;
- break;
- case XFS_DINODE_FMT_LOCAL:
- case XFS_DINODE_FMT_UUID:
- buf->bs_rdev = 0;
- buf->bs_blksize = mp->m_sb.sb_blocksize;
- buf->bs_blocks = 0;
- break;
- case XFS_DINODE_FMT_EXTENTS:
- case XFS_DINODE_FMT_BTREE:
- buf->bs_rdev = 0;
- buf->bs_blksize = mp->m_sb.sb_blocksize;
- buf->bs_blocks = be64_to_cpu(dic->di_nblocks);
- break;
- }
-}
-
/* Return 0 on success or positive error */
STATIC int
xfs_bulkstat_one_fmt(
@@ -217,118 +172,17 @@
return 0;
}
-/*
- * Return stat information for one inode.
- * Return 0 if ok, else errno.
- */
-int /* error status */
-xfs_bulkstat_one_int(
- xfs_mount_t *mp, /* mount point for filesystem */
- xfs_ino_t ino, /* inode number to get data for */
- void __user *buffer, /* buffer to place output in */
- int ubsize, /* size of buffer */
- bulkstat_one_fmt_pf formatter, /* formatter, copy to user */
- xfs_daddr_t bno, /* starting bno of inode cluster */
- int *ubused, /* bytes used by me */
- void *dibuff, /* on-disk inode buffer */
- int *stat) /* BULKSTAT_RV_... */
-{
- xfs_bstat_t *buf; /* return buffer */
- int error = 0; /* error value */
- xfs_dinode_t *dip; /* dinode inode pointer */
-
- dip = (xfs_dinode_t *)dibuff;
- *stat = BULKSTAT_RV_NOTHING;
-
- if (!buffer || xfs_internal_inum(mp, ino))
- return XFS_ERROR(EINVAL);
-
- buf = kmem_alloc(sizeof(*buf), KM_SLEEP);
-
- if (dip == NULL) {
- /* We're not being passed a pointer to a dinode. This happens
- * if BULKSTAT_FG_IGET is selected. Do the iget.
- */
- error = xfs_bulkstat_one_iget(mp, ino, bno, buf, stat);
- if (error)
- goto out_free;
- } else {
- xfs_bulkstat_one_dinode(mp, ino, dip, buf);
- }
-
- error = formatter(buffer, ubsize, ubused, buf);
- if (error)
- goto out_free;
-
- *stat = BULKSTAT_RV_DIDONE;
-
- out_free:
- kmem_free(buf);
- return error;
-}
-
int
xfs_bulkstat_one(
xfs_mount_t *mp, /* mount point for filesystem */
xfs_ino_t ino, /* inode number to get data for */
void __user *buffer, /* buffer to place output in */
int ubsize, /* size of buffer */
- void *private_data, /* my private data */
- xfs_daddr_t bno, /* starting bno of inode cluster */
int *ubused, /* bytes used by me */
- void *dibuff, /* on-disk inode buffer */
int *stat) /* BULKSTAT_RV_... */
{
return xfs_bulkstat_one_int(mp, ino, buffer, ubsize,
- xfs_bulkstat_one_fmt, bno,
- ubused, dibuff, stat);
-}
-
-/*
- * Test to see whether we can use the ondisk inode directly, based
- * on the given bulkstat flags, filling in dipp accordingly.
- * Returns zero if the inode is dodgey.
- */
-STATIC int
-xfs_bulkstat_use_dinode(
- xfs_mount_t *mp,
- int flags,
- xfs_buf_t *bp,
- int clustidx,
- xfs_dinode_t **dipp)
-{
- xfs_dinode_t *dip;
- unsigned int aformat;
-
- *dipp = NULL;
- if (!bp || (flags & BULKSTAT_FG_IGET))
- return 1;
- dip = (xfs_dinode_t *)
- xfs_buf_offset(bp, clustidx << mp->m_sb.sb_inodelog);
- /*
- * Check the buffer containing the on-disk inode for di_mode == 0.
- * This is to prevent xfs_bulkstat from picking up just reclaimed
- * inodes that have their in-core state initialized but not flushed
- * to disk yet. This is a temporary hack that would require a proper
- * fix in the future.
- */
- if (be16_to_cpu(dip->di_magic) != XFS_DINODE_MAGIC ||
- !XFS_DINODE_GOOD_VERSION(dip->di_version) ||
- !dip->di_mode)
- return 0;
- if (flags & BULKSTAT_FG_QUICK) {
- *dipp = dip;
- return 1;
- }
- /* BULKSTAT_FG_INLINE: if attr fork is local, or not there, use it */
- aformat = dip->di_aformat;
- if ((XFS_DFORK_Q(dip) == 0) ||
- (aformat == XFS_DINODE_FMT_LOCAL) ||
- (aformat == XFS_DINODE_FMT_EXTENTS && !dip->di_anextents)) {
- *dipp = dip;
- return 1;
- }
- return 1;
+ xfs_bulkstat_one_fmt, ubused, stat);
}
#define XFS_BULKSTAT_UBLEFT(ubleft) ((ubleft) >= statstruct_size)
@@ -342,10 +196,8 @@
xfs_ino_t *lastinop, /* last inode returned */
int *ubcountp, /* size of buffer/count returned */
bulkstat_one_pf formatter, /* func that'd fill a single buf */
- void *private_data,/* private data for formatter */
size_t statstruct_size, /* sizeof struct filling */
char __user *ubuffer, /* buffer with inode stats */
- int flags, /* defined in xfs_itable.h */
int *done) /* 1 if there are more stats to get */
{
xfs_agblock_t agbno=0;/* allocation group block number */
@@ -380,14 +232,12 @@
int ubelem; /* spaces used in user's buffer */
int ubused; /* bytes used by formatter */
xfs_buf_t *bp; /* ptr to on-disk inode cluster buf */
- xfs_dinode_t *dip; /* ptr into bp for specific inode */
/*
* Get the last inode value, see if there's nothing to do.
*/
ino = (xfs_ino_t)*lastinop;
lastino = ino;
- dip = NULL;
agno = XFS_INO_TO_AGNO(mp, ino);
agino = XFS_INO_TO_AGINO(mp, ino);
if (agno >= mp->m_sb.sb_agcount ||
@@ -612,37 +462,6 @@
irbp->ir_startino) +
((chunkidx & nimask) >>
mp->m_sb.sb_inopblog);
-
- if (flags & (BULKSTAT_FG_QUICK |
- BULKSTAT_FG_INLINE)) {
- int offset;
-
- ino = XFS_AGINO_TO_INO(mp, agno,
- agino);
- bno = XFS_AGB_TO_DADDR(mp, agno,
- agbno);
-
- /*
- * Get the inode cluster buffer
- */
- if (bp)
- xfs_buf_relse(bp);
-
- error = xfs_inotobp(mp, NULL, ino, &dip,
- &bp, &offset,
- XFS_IGET_BULKSTAT);
-
- if (!error)
- clustidx = offset / mp->m_sb.sb_inodesize;
- if (XFS_TEST_ERROR(error != 0,
- mp, XFS_ERRTAG_BULKSTAT_READ_CHUNK,
- XFS_RANDOM_BULKSTAT_READ_CHUNK)) {
- bp = NULL;
- ubleft = 0;
- rval = error;
- break;
- }
- }
}
ino = XFS_AGINO_TO_INO(mp, agno, agino);
bno = XFS_AGB_TO_DADDR(mp, agno, agbno);
@@ -658,35 +477,13 @@
* when the chunk is used up.
*/
irbp->ir_freecount++;
- if (!xfs_bulkstat_use_dinode(mp, flags, bp,
- clustidx, &dip)) {
- lastino = ino;
- continue;
- }
- /*
- * If we need to do an iget, cannot hold bp.
- * Drop it, until starting the next cluster.
- */
- if ((flags & BULKSTAT_FG_INLINE) && !dip) {
- if (bp)
- xfs_buf_relse(bp);
- bp = NULL;
- }
/*
* Get the inode and fill in a single buffer.
- * BULKSTAT_FG_QUICK uses dip to fill it in.
- * BULKSTAT_FG_IGET uses igets.
- * BULKSTAT_FG_INLINE uses dip if we have an
- * inline attr fork, else igets.
- * See: xfs_bulkstat_one & xfs_dm_bulkstat_one.
- * This is also used to count inodes/blks, etc
- * in xfs_qm_quotacheck.
*/
ubused = statstruct_size;
- error = formatter(mp, ino, ubufp,
- ubleft, private_data,
- bno, &ubused, dip, &fmterror);
+ error = formatter(mp, ino, ubufp, ubleft,
+ &ubused, &fmterror);
if (fmterror == BULKSTAT_RV_NOTHING) {
if (error && error != ENOENT &&
error != EINVAL) {
@@ -778,8 +575,7 @@
*/
ino = (xfs_ino_t)*lastinop;
- error = xfs_bulkstat_one(mp, ino, buffer, sizeof(xfs_bstat_t),
- NULL, 0, NULL, NULL, &res);
+ error = xfs_bulkstat_one(mp, ino, buffer, sizeof(xfs_bstat_t), 0, &res);
if (error) {
/*
* Special case way failed, do it the "long" way
@@ -788,8 +584,7 @@
(*lastinop)--;
count = 1;
if (xfs_bulkstat(mp, lastinop, &count, xfs_bulkstat_one,
- NULL, sizeof(xfs_bstat_t), buffer,
- BULKSTAT_FG_IGET, done))
+ sizeof(xfs_bstat_t), buffer, done))
return error;
if (count == 0 || (xfs_ino_t)*lastinop != ino)
return error == EFSCORRUPTED ?
diff --git a/fs/xfs/xfs_itable.h b/fs/xfs/xfs_itable.h
index 20792bf..97295d9 100644
--- a/fs/xfs/xfs_itable.h
+++ b/fs/xfs/xfs_itable.h
@@ -27,10 +27,7 @@
xfs_ino_t ino,
void __user *buffer,
int ubsize,
- void *private_data,
- xfs_daddr_t bno,
int *ubused,
- void *dip,
int *stat);
/*
@@ -41,13 +38,6 @@
#define BULKSTAT_RV_GIVEUP 2
/*
- * Values for bulkstat flag argument.
- */
-#define BULKSTAT_FG_IGET 0x1 /* Go through the buffer cache */
-#define BULKSTAT_FG_QUICK 0x2 /* No iget, walk the dinode cluster */
-#define BULKSTAT_FG_INLINE 0x4 /* No iget if inline attrs */
-
-/*
* Return stat information in bulk (by-inode) for the filesystem.
*/
int /* error status */
@@ -56,10 +46,8 @@
xfs_ino_t *lastino, /* last inode returned */
int *count, /* size of buffer/count returned */
bulkstat_one_pf formatter, /* func that'd fill a single buf */
- void *private_data, /* private data for formatter */
size_t statstruct_size,/* sizeof struct that we're filling */
char __user *ubuffer,/* buffer with inode stats */
- int flags, /* flag to control access method */
int *done); /* 1 if there are more stats to get */
int
@@ -82,9 +70,7 @@
void __user *buffer,
int ubsize,
bulkstat_one_fmt_pf formatter,
- xfs_daddr_t bno,
int *ubused,
- void *dibuff,
int *stat);
int
@@ -93,10 +79,7 @@
xfs_ino_t ino,
void __user *buffer,
int ubsize,
- void *private_data,
- xfs_daddr_t bno,
int *ubused,
- void *dibuff,
int *stat);
typedef int (*inumbers_fmt_pf)(
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 14a69ae..9ac5cfa 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -132,15 +132,10 @@
int nbblks,
xfs_buf_t *bp)
{
- xfs_daddr_t offset;
- xfs_caddr_t ptr;
+ xfs_daddr_t offset = blk_no & ((xfs_daddr_t)log->l_sectBBsize - 1);
- offset = blk_no & ((xfs_daddr_t) log->l_sectBBsize - 1);
- ptr = XFS_BUF_PTR(bp) + BBTOB(offset);
-
- ASSERT(ptr + BBTOB(nbblks) <= XFS_BUF_PTR(bp) + XFS_BUF_SIZE(bp));
-
- return ptr;
+ ASSERT(BBTOB(offset + nbblks) <= XFS_BUF_SIZE(bp));
+ return XFS_BUF_PTR(bp) + BBTOB(offset);
}
@@ -3203,7 +3198,7 @@
int error;
ino = XFS_AGINO_TO_INO(mp, agno, agino);
- error = xfs_iget(mp, NULL, ino, 0, 0, &ip, 0);
+ error = xfs_iget(mp, NULL, ino, 0, 0, &ip);
if (error)
goto fail;
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index d7bf38c..69f62d8 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -268,10 +268,10 @@
#if XFS_BIG_BLKNOS /* Limited by ULONG_MAX of page cache index */
if (nblocks >> (PAGE_CACHE_SHIFT - sbp->sb_blocklog) > ULONG_MAX)
- return E2BIG;
+ return EFBIG;
#else /* Limited by UINT_MAX of sectors */
if (nblocks << (sbp->sb_blocklog - BBSHIFT) > UINT_MAX)
- return E2BIG;
+ return EFBIG;
#endif
return 0;
}
@@ -393,7 +393,7 @@
xfs_sb_validate_fsb_count(sbp, sbp->sb_rblocks)) {
xfs_fs_mount_cmn_err(flags,
"file system too large to be mounted on this system.");
- return XFS_ERROR(E2BIG);
+ return XFS_ERROR(EFBIG);
}
if (unlikely(sbp->sb_inprogress)) {
@@ -413,17 +413,6 @@
return 0;
}
-STATIC void
-xfs_initialize_perag_icache(
- xfs_perag_t *pag)
-{
- if (!pag->pag_ici_init) {
- rwlock_init(&pag->pag_ici_lock);
- INIT_RADIX_TREE(&pag->pag_ici_root, GFP_ATOMIC);
- pag->pag_ici_init = 1;
- }
-}
-
int
xfs_initialize_perag(
xfs_mount_t *mp,
@@ -436,13 +425,8 @@
xfs_agino_t agino;
xfs_ino_t ino;
xfs_sb_t *sbp = &mp->m_sb;
- xfs_ino_t max_inum = XFS_MAXINUMBER_32;
int error = -ENOMEM;
- /* Check to see if the filesystem can overflow 32 bit inodes */
- agino = XFS_OFFBNO_TO_AGINO(mp, sbp->sb_agblocks - 1, 0);
- ino = XFS_AGINO_TO_INO(mp, agcount - 1, agino);
-
/*
* Walk the current per-ag tree so we don't try to initialise AGs
* that already exist (growfs case). Allocate and insert all the
@@ -456,11 +440,18 @@
}
if (!first_initialised)
first_initialised = index;
+
pag = kmem_zalloc(sizeof(*pag), KM_MAYFAIL);
if (!pag)
goto out_unwind;
+ pag->pag_agno = index;
+ pag->pag_mount = mp;
+ rwlock_init(&pag->pag_ici_lock);
+ INIT_RADIX_TREE(&pag->pag_ici_root, GFP_ATOMIC);
+
if (radix_tree_preload(GFP_NOFS))
goto out_unwind;
+
spin_lock(&mp->m_perag_lock);
if (radix_tree_insert(&mp->m_perag_tree, index, pag)) {
BUG();
@@ -469,25 +460,26 @@
error = -EEXIST;
goto out_unwind;
}
- pag->pag_agno = index;
- pag->pag_mount = mp;
spin_unlock(&mp->m_perag_lock);
radix_tree_preload_end();
}
- /* Clear the mount flag if no inode can overflow 32 bits
- * on this filesystem, or if specifically requested..
+ /*
+ * If we mount with the inode64 option, or no inode overflows
+ * the legacy 32-bit address space clear the inode32 option.
*/
- if ((mp->m_flags & XFS_MOUNT_SMALL_INUMS) && ino > max_inum) {
- mp->m_flags |= XFS_MOUNT_32BITINODES;
- } else {
- mp->m_flags &= ~XFS_MOUNT_32BITINODES;
- }
+ agino = XFS_OFFBNO_TO_AGINO(mp, sbp->sb_agblocks - 1, 0);
+ ino = XFS_AGINO_TO_INO(mp, agcount - 1, agino);
- /* If we can overflow then setup the ag headers accordingly */
+ if ((mp->m_flags & XFS_MOUNT_SMALL_INUMS) && ino > XFS_MAXINUMBER_32)
+ mp->m_flags |= XFS_MOUNT_32BITINODES;
+ else
+ mp->m_flags &= ~XFS_MOUNT_32BITINODES;
+
if (mp->m_flags & XFS_MOUNT_32BITINODES) {
- /* Calculate how much should be reserved for inodes to
- * meet the max inode percentage.
+ /*
+ * Calculate how much should be reserved for inodes to meet
+ * the max inode percentage.
*/
if (mp->m_maxicount) {
__uint64_t icount;
@@ -500,30 +492,28 @@
} else {
max_metadata = agcount;
}
+
for (index = 0; index < agcount; index++) {
ino = XFS_AGINO_TO_INO(mp, index, agino);
- if (ino > max_inum) {
+ if (ino > XFS_MAXINUMBER_32) {
index++;
break;
}
- /* This ag is preferred for inodes */
pag = xfs_perag_get(mp, index);
pag->pagi_inodeok = 1;
if (index < max_metadata)
pag->pagf_metadata = 1;
- xfs_initialize_perag_icache(pag);
xfs_perag_put(pag);
}
} else {
- /* Setup default behavior for smaller filesystems */
for (index = 0; index < agcount; index++) {
pag = xfs_perag_get(mp, index);
pag->pagi_inodeok = 1;
- xfs_initialize_perag_icache(pag);
xfs_perag_put(pag);
}
}
+
if (maxagi)
*maxagi = index;
return 0;
@@ -1009,7 +999,7 @@
d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks);
if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_dblocks) {
cmn_err(CE_WARN, "XFS: size check 1 failed");
- return XFS_ERROR(E2BIG);
+ return XFS_ERROR(EFBIG);
}
error = xfs_read_buf(mp, mp->m_ddev_targp,
d - XFS_FSS_TO_BB(mp, 1),
@@ -1019,7 +1009,7 @@
} else {
cmn_err(CE_WARN, "XFS: size check 2 failed");
if (error == ENOSPC)
- error = XFS_ERROR(E2BIG);
+ error = XFS_ERROR(EFBIG);
return error;
}
@@ -1027,7 +1017,7 @@
d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_logblocks);
if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_logblocks) {
cmn_err(CE_WARN, "XFS: size check 3 failed");
- return XFS_ERROR(E2BIG);
+ return XFS_ERROR(EFBIG);
}
error = xfs_read_buf(mp, mp->m_logdev_targp,
d - XFS_FSB_TO_BB(mp, 1),
@@ -1037,7 +1027,7 @@
} else {
cmn_err(CE_WARN, "XFS: size check 3 failed");
if (error == ENOSPC)
- error = XFS_ERROR(E2BIG);
+ error = XFS_ERROR(EFBIG);
return error;
}
}
@@ -1254,7 +1244,7 @@
* Allocate and initialize the per-ag data.
*/
spin_lock_init(&mp->m_perag_lock);
- INIT_RADIX_TREE(&mp->m_perag_tree, GFP_NOFS);
+ INIT_RADIX_TREE(&mp->m_perag_tree, GFP_ATOMIC);
error = xfs_initialize_perag(mp, sbp->sb_agcount, &mp->m_maxagi);
if (error) {
cmn_err(CE_WARN, "XFS: Failed per-ag init: %d", error);
@@ -1310,7 +1300,7 @@
* Get and sanity-check the root inode.
* Save the pointer to it in the mount structure.
*/
- error = xfs_iget(mp, NULL, sbp->sb_rootino, 0, XFS_ILOCK_EXCL, &rip, 0);
+ error = xfs_iget(mp, NULL, sbp->sb_rootino, 0, XFS_ILOCK_EXCL, &rip);
if (error) {
cmn_err(CE_WARN, "XFS: failed to read root inode");
goto out_log_dealloc;
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index 1d2c7ee..5761087 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -259,7 +259,7 @@
wait_queue_head_t m_wait_single_sync_task;
__int64_t m_update_flags; /* sb flags we need to update
on the next remount,rw */
- struct list_head m_mplist; /* inode shrinker mount list */
+ struct shrinker m_inode_shrink; /* inode reclaim shrinker */
} xfs_mount_t;
/*
diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c
index 6be05f7..a2d32ce 100644
--- a/fs/xfs/xfs_rtalloc.c
+++ b/fs/xfs/xfs_rtalloc.c
@@ -2247,7 +2247,7 @@
cmn_err(CE_WARN, "XFS: realtime mount -- %llu != %llu",
(unsigned long long) XFS_BB_TO_FSB(mp, d),
(unsigned long long) mp->m_sb.sb_rblocks);
- return XFS_ERROR(E2BIG);
+ return XFS_ERROR(EFBIG);
}
error = xfs_read_buf(mp, mp->m_rtdev_targp,
d - XFS_FSB_TO_BB(mp, 1),
@@ -2256,7 +2256,7 @@
cmn_err(CE_WARN,
"XFS: realtime mount -- xfs_read_buf failed, returned %d", error);
if (error == ENOSPC)
- return XFS_ERROR(E2BIG);
+ return XFS_ERROR(EFBIG);
return error;
}
xfs_buf_relse(bp);
@@ -2277,12 +2277,12 @@
sbp = &mp->m_sb;
if (sbp->sb_rbmino == NULLFSINO)
return 0;
- error = xfs_iget(mp, NULL, sbp->sb_rbmino, 0, 0, &mp->m_rbmip, 0);
+ error = xfs_iget(mp, NULL, sbp->sb_rbmino, 0, 0, &mp->m_rbmip);
if (error)
return error;
ASSERT(mp->m_rbmip != NULL);
ASSERT(sbp->sb_rsumino != NULLFSINO);
- error = xfs_iget(mp, NULL, sbp->sb_rsumino, 0, 0, &mp->m_rsumip, 0);
+ error = xfs_iget(mp, NULL, sbp->sb_rsumino, 0, 0, &mp->m_rsumip);
if (error) {
IRELE(mp->m_rbmip);
return error;
diff --git a/fs/xfs/xfs_rtalloc.h b/fs/xfs/xfs_rtalloc.h
index b2d67ad..ff614c2 100644
--- a/fs/xfs/xfs_rtalloc.h
+++ b/fs/xfs/xfs_rtalloc.h
@@ -147,7 +147,16 @@
# define xfs_rtfree_extent(t,b,l) (ENOSYS)
# define xfs_rtpick_extent(m,t,l,rb) (ENOSYS)
# define xfs_growfs_rt(mp,in) (ENOSYS)
-# define xfs_rtmount_init(m) (((mp)->m_sb.sb_rblocks == 0)? 0 : (ENOSYS))
+static inline int /* error */
+xfs_rtmount_init(
+ xfs_mount_t *mp) /* file system mount structure */
+{
+ if (mp->m_sb.sb_rblocks == 0)
+ return 0;
+
+ cmn_err(CE_WARN, "XFS: Not built with CONFIG_XFS_RT");
+ return ENOSYS;
+}
# define xfs_rtmount_inodes(m) (((mp)->m_sb.sb_rblocks == 0)? 0 : (ENOSYS))
# define xfs_rtunmount_inodes(m)
#endif /* CONFIG_XFS_RT */
diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c
index ce558ef..28547df 100644
--- a/fs/xfs/xfs_trans.c
+++ b/fs/xfs/xfs_trans.c
@@ -48,134 +48,489 @@
kmem_zone_t *xfs_trans_zone;
+
/*
- * Reservation functions here avoid a huge stack in xfs_trans_init
- * due to register overflow from temporaries in the calculations.
+ * Various log reservation values.
+ *
+ * These are based on the size of the file system block because that is what
+ * most transactions manipulate. Each adds in an additional 128 bytes per
+ * item logged to try to account for the overhead of the transaction mechanism.
+ *
+ * Note: Most of the reservations underestimate the number of allocation
+ * groups into which they could free extents in the xfs_bmap_finish() call.
+ * This is because the number in the worst case is quite high and quite
+ * unusual. In order to fix this we need to change xfs_bmap_finish() to free
+ * extents in only a single AG at a time. This will require changes to the
+ * EFI code as well, however, so that the EFI for the extents not freed is
+ * logged again in each transaction. See SGI PV #261917.
+ *
+ * Reservation functions here avoid a huge stack in xfs_trans_init due to
+ * register overflow from temporaries in the calculations.
+ */
+
+
+/*
+ * In a write transaction we can allocate a maximum of 2
+ * extents. This gives:
+ * the inode getting the new extents: inode size
+ * the inode's bmap btree: max depth * block size
+ * the agfs of the ags from which the extents are allocated: 2 * sector
+ * the superblock free block counter: sector size
+ * the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
+ * And the bmap_finish transaction can free bmap blocks in a join:
+ * the agfs of the ags containing the blocks: 2 * sector size
+ * the agfls of the ags containing the blocks: 2 * sector size
+ * the super block free block counter: sector size
+ * the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
*/
STATIC uint
-xfs_calc_write_reservation(xfs_mount_t *mp)
+xfs_calc_write_reservation(
+ struct xfs_mount *mp)
{
- return XFS_CALC_WRITE_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+ return XFS_DQUOT_LOGRES(mp) +
+ MAX((mp->m_sb.sb_inodesize +
+ XFS_FSB_TO_B(mp, XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK)) +
+ 2 * mp->m_sb.sb_sectsize +
+ mp->m_sb.sb_sectsize +
+ XFS_ALLOCFREE_LOG_RES(mp, 2) +
+ 128 * (4 + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK) +
+ XFS_ALLOCFREE_LOG_COUNT(mp, 2))),
+ (2 * mp->m_sb.sb_sectsize +
+ 2 * mp->m_sb.sb_sectsize +
+ mp->m_sb.sb_sectsize +
+ XFS_ALLOCFREE_LOG_RES(mp, 2) +
+ 128 * (5 + XFS_ALLOCFREE_LOG_COUNT(mp, 2))));
}
+/*
+ * In truncating a file we free up to two extents at once. We can modify:
+ * the inode being truncated: inode size
+ * the inode's bmap btree: (max depth + 1) * block size
+ * And the bmap_finish transaction can free the blocks and bmap blocks:
+ * the agf for each of the ags: 4 * sector size
+ * the agfl for each of the ags: 4 * sector size
+ * the super block to reflect the freed blocks: sector size
+ * worst case split in allocation btrees per extent assuming 4 extents:
+ * 4 exts * 2 trees * (2 * max depth - 1) * block size
+ * the inode btree: max depth * blocksize
+ * the allocation btrees: 2 trees * (max depth - 1) * block size
+ */
STATIC uint
-xfs_calc_itruncate_reservation(xfs_mount_t *mp)
+xfs_calc_itruncate_reservation(
+ struct xfs_mount *mp)
{
- return XFS_CALC_ITRUNCATE_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+ return XFS_DQUOT_LOGRES(mp) +
+ MAX((mp->m_sb.sb_inodesize +
+ XFS_FSB_TO_B(mp, XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK) + 1) +
+ 128 * (2 + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK))),
+ (4 * mp->m_sb.sb_sectsize +
+ 4 * mp->m_sb.sb_sectsize +
+ mp->m_sb.sb_sectsize +
+ XFS_ALLOCFREE_LOG_RES(mp, 4) +
+ 128 * (9 + XFS_ALLOCFREE_LOG_COUNT(mp, 4)) +
+ 128 * 5 +
+ XFS_ALLOCFREE_LOG_RES(mp, 1) +
+ 128 * (2 + XFS_IALLOC_BLOCKS(mp) + mp->m_in_maxlevels +
+ XFS_ALLOCFREE_LOG_COUNT(mp, 1))));
}
+/*
+ * In renaming a files we can modify:
+ * the four inodes involved: 4 * inode size
+ * the two directory btrees: 2 * (max depth + v2) * dir block size
+ * the two directory bmap btrees: 2 * max depth * block size
+ * And the bmap_finish transaction can free dir and bmap blocks (two sets
+ * of bmap blocks) giving:
+ * the agf for the ags in which the blocks live: 3 * sector size
+ * the agfl for the ags in which the blocks live: 3 * sector size
+ * the superblock for the free block count: sector size
+ * the allocation btrees: 3 exts * 2 trees * (2 * max depth - 1) * block size
+ */
STATIC uint
-xfs_calc_rename_reservation(xfs_mount_t *mp)
+xfs_calc_rename_reservation(
+ struct xfs_mount *mp)
{
- return XFS_CALC_RENAME_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+ return XFS_DQUOT_LOGRES(mp) +
+ MAX((4 * mp->m_sb.sb_inodesize +
+ 2 * XFS_DIROP_LOG_RES(mp) +
+ 128 * (4 + 2 * XFS_DIROP_LOG_COUNT(mp))),
+ (3 * mp->m_sb.sb_sectsize +
+ 3 * mp->m_sb.sb_sectsize +
+ mp->m_sb.sb_sectsize +
+ XFS_ALLOCFREE_LOG_RES(mp, 3) +
+ 128 * (7 + XFS_ALLOCFREE_LOG_COUNT(mp, 3))));
}
+/*
+ * For creating a link to an inode:
+ * the parent directory inode: inode size
+ * the linked inode: inode size
+ * the directory btree could split: (max depth + v2) * dir block size
+ * the directory bmap btree could join or split: (max depth + v2) * blocksize
+ * And the bmap_finish transaction can free some bmap blocks giving:
+ * the agf for the ag in which the blocks live: sector size
+ * the agfl for the ag in which the blocks live: sector size
+ * the superblock for the free block count: sector size
+ * the allocation btrees: 2 trees * (2 * max depth - 1) * block size
+ */
STATIC uint
-xfs_calc_link_reservation(xfs_mount_t *mp)
+xfs_calc_link_reservation(
+ struct xfs_mount *mp)
{
- return XFS_CALC_LINK_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+ return XFS_DQUOT_LOGRES(mp) +
+ MAX((mp->m_sb.sb_inodesize +
+ mp->m_sb.sb_inodesize +
+ XFS_DIROP_LOG_RES(mp) +
+ 128 * (2 + XFS_DIROP_LOG_COUNT(mp))),
+ (mp->m_sb.sb_sectsize +
+ mp->m_sb.sb_sectsize +
+ mp->m_sb.sb_sectsize +
+ XFS_ALLOCFREE_LOG_RES(mp, 1) +
+ 128 * (3 + XFS_ALLOCFREE_LOG_COUNT(mp, 1))));
}
+/*
+ * For removing a directory entry we can modify:
+ * the parent directory inode: inode size
+ * the removed inode: inode size
+ * the directory btree could join: (max depth + v2) * dir block size
+ * the directory bmap btree could join or split: (max depth + v2) * blocksize
+ * And the bmap_finish transaction can free the dir and bmap blocks giving:
+ * the agf for the ag in which the blocks live: 2 * sector size
+ * the agfl for the ag in which the blocks live: 2 * sector size
+ * the superblock for the free block count: sector size
+ * the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
+ */
STATIC uint
-xfs_calc_remove_reservation(xfs_mount_t *mp)
+xfs_calc_remove_reservation(
+ struct xfs_mount *mp)
{
- return XFS_CALC_REMOVE_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+ return XFS_DQUOT_LOGRES(mp) +
+ MAX((mp->m_sb.sb_inodesize +
+ mp->m_sb.sb_inodesize +
+ XFS_DIROP_LOG_RES(mp) +
+ 128 * (2 + XFS_DIROP_LOG_COUNT(mp))),
+ (2 * mp->m_sb.sb_sectsize +
+ 2 * mp->m_sb.sb_sectsize +
+ mp->m_sb.sb_sectsize +
+ XFS_ALLOCFREE_LOG_RES(mp, 2) +
+ 128 * (5 + XFS_ALLOCFREE_LOG_COUNT(mp, 2))));
}
+/*
+ * For symlink we can modify:
+ * the parent directory inode: inode size
+ * the new inode: inode size
+ * the inode btree entry: 1 block
+ * the directory btree: (max depth + v2) * dir block size
+ * the directory inode's bmap btree: (max depth + v2) * block size
+ * the blocks for the symlink: 1 kB
+ * Or in the first xact we allocate some inodes giving:
+ * the agi and agf of the ag getting the new inodes: 2 * sectorsize
+ * the inode blocks allocated: XFS_IALLOC_BLOCKS * blocksize
+ * the inode btree: max depth * blocksize
+ * the allocation btrees: 2 trees * (2 * max depth - 1) * block size
+ */
STATIC uint
-xfs_calc_symlink_reservation(xfs_mount_t *mp)
+xfs_calc_symlink_reservation(
+ struct xfs_mount *mp)
{
- return XFS_CALC_SYMLINK_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+ return XFS_DQUOT_LOGRES(mp) +
+ MAX((mp->m_sb.sb_inodesize +
+ mp->m_sb.sb_inodesize +
+ XFS_FSB_TO_B(mp, 1) +
+ XFS_DIROP_LOG_RES(mp) +
+ 1024 +
+ 128 * (4 + XFS_DIROP_LOG_COUNT(mp))),
+ (2 * mp->m_sb.sb_sectsize +
+ XFS_FSB_TO_B(mp, XFS_IALLOC_BLOCKS(mp)) +
+ XFS_FSB_TO_B(mp, mp->m_in_maxlevels) +
+ XFS_ALLOCFREE_LOG_RES(mp, 1) +
+ 128 * (2 + XFS_IALLOC_BLOCKS(mp) + mp->m_in_maxlevels +
+ XFS_ALLOCFREE_LOG_COUNT(mp, 1))));
}
+/*
+ * For create we can modify:
+ * the parent directory inode: inode size
+ * the new inode: inode size
+ * the inode btree entry: block size
+ * the superblock for the nlink flag: sector size
+ * the directory btree: (max depth + v2) * dir block size
+ * the directory inode's bmap btree: (max depth + v2) * block size
+ * Or in the first xact we allocate some inodes giving:
+ * the agi and agf of the ag getting the new inodes: 2 * sectorsize
+ * the superblock for the nlink flag: sector size
+ * the inode blocks allocated: XFS_IALLOC_BLOCKS * blocksize
+ * the inode btree: max depth * blocksize
+ * the allocation btrees: 2 trees * (max depth - 1) * block size
+ */
STATIC uint
-xfs_calc_create_reservation(xfs_mount_t *mp)
+xfs_calc_create_reservation(
+ struct xfs_mount *mp)
{
- return XFS_CALC_CREATE_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+ return XFS_DQUOT_LOGRES(mp) +
+ MAX((mp->m_sb.sb_inodesize +
+ mp->m_sb.sb_inodesize +
+ mp->m_sb.sb_sectsize +
+ XFS_FSB_TO_B(mp, 1) +
+ XFS_DIROP_LOG_RES(mp) +
+ 128 * (3 + XFS_DIROP_LOG_COUNT(mp))),
+ (3 * mp->m_sb.sb_sectsize +
+ XFS_FSB_TO_B(mp, XFS_IALLOC_BLOCKS(mp)) +
+ XFS_FSB_TO_B(mp, mp->m_in_maxlevels) +
+ XFS_ALLOCFREE_LOG_RES(mp, 1) +
+ 128 * (2 + XFS_IALLOC_BLOCKS(mp) + mp->m_in_maxlevels +
+ XFS_ALLOCFREE_LOG_COUNT(mp, 1))));
}
+/*
+ * Making a new directory is the same as creating a new file.
+ */
STATIC uint
-xfs_calc_mkdir_reservation(xfs_mount_t *mp)
+xfs_calc_mkdir_reservation(
+ struct xfs_mount *mp)
{
- return XFS_CALC_MKDIR_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+ return xfs_calc_create_reservation(mp);
}
+/*
+ * In freeing an inode we can modify:
+ * the inode being freed: inode size
+ * the super block free inode counter: sector size
+ * the agi hash list and counters: sector size
+ * the inode btree entry: block size
+ * the on disk inode before ours in the agi hash list: inode cluster size
+ * the inode btree: max depth * blocksize
+ * the allocation btrees: 2 trees * (max depth - 1) * block size
+ */
STATIC uint
-xfs_calc_ifree_reservation(xfs_mount_t *mp)
+xfs_calc_ifree_reservation(
+ struct xfs_mount *mp)
{
- return XFS_CALC_IFREE_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+ return XFS_DQUOT_LOGRES(mp) +
+ mp->m_sb.sb_inodesize +
+ mp->m_sb.sb_sectsize +
+ mp->m_sb.sb_sectsize +
+ XFS_FSB_TO_B(mp, 1) +
+ MAX((__uint16_t)XFS_FSB_TO_B(mp, 1),
+ XFS_INODE_CLUSTER_SIZE(mp)) +
+ 128 * 5 +
+ XFS_ALLOCFREE_LOG_RES(mp, 1) +
+ 128 * (2 + XFS_IALLOC_BLOCKS(mp) + mp->m_in_maxlevels +
+ XFS_ALLOCFREE_LOG_COUNT(mp, 1));
}
+/*
+ * When only changing the inode we log the inode and possibly the superblock
+ * We also add a bit of slop for the transaction stuff.
+ */
STATIC uint
-xfs_calc_ichange_reservation(xfs_mount_t *mp)
+xfs_calc_ichange_reservation(
+ struct xfs_mount *mp)
{
- return XFS_CALC_ICHANGE_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+ return XFS_DQUOT_LOGRES(mp) +
+ mp->m_sb.sb_inodesize +
+ mp->m_sb.sb_sectsize +
+ 512;
+
}
+/*
+ * Growing the data section of the filesystem.
+ * superblock
+ * agi and agf
+ * allocation btrees
+ */
STATIC uint
-xfs_calc_growdata_reservation(xfs_mount_t *mp)
+xfs_calc_growdata_reservation(
+ struct xfs_mount *mp)
{
- return XFS_CALC_GROWDATA_LOG_RES(mp);
+ return mp->m_sb.sb_sectsize * 3 +
+ XFS_ALLOCFREE_LOG_RES(mp, 1) +
+ 128 * (3 + XFS_ALLOCFREE_LOG_COUNT(mp, 1));
}
+/*
+ * Growing the rt section of the filesystem.
+ * In the first set of transactions (ALLOC) we allocate space to the
+ * bitmap or summary files.
+ * superblock: sector size
+ * agf of the ag from which the extent is allocated: sector size
+ * bmap btree for bitmap/summary inode: max depth * blocksize
+ * bitmap/summary inode: inode size
+ * allocation btrees for 1 block alloc: 2 * (2 * maxdepth - 1) * blocksize
+ */
STATIC uint
-xfs_calc_growrtalloc_reservation(xfs_mount_t *mp)
+xfs_calc_growrtalloc_reservation(
+ struct xfs_mount *mp)
{
- return XFS_CALC_GROWRTALLOC_LOG_RES(mp);
+ return 2 * mp->m_sb.sb_sectsize +
+ XFS_FSB_TO_B(mp, XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK)) +
+ mp->m_sb.sb_inodesize +
+ XFS_ALLOCFREE_LOG_RES(mp, 1) +
+ 128 * (3 + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK) +
+ XFS_ALLOCFREE_LOG_COUNT(mp, 1));
}
+/*
+ * Growing the rt section of the filesystem.
+ * In the second set of transactions (ZERO) we zero the new metadata blocks.
+ * one bitmap/summary block: blocksize
+ */
STATIC uint
-xfs_calc_growrtzero_reservation(xfs_mount_t *mp)
+xfs_calc_growrtzero_reservation(
+ struct xfs_mount *mp)
{
- return XFS_CALC_GROWRTZERO_LOG_RES(mp);
+ return mp->m_sb.sb_blocksize + 128;
}
+/*
+ * Growing the rt section of the filesystem.
+ * In the third set of transactions (FREE) we update metadata without
+ * allocating any new blocks.
+ * superblock: sector size
+ * bitmap inode: inode size
+ * summary inode: inode size
+ * one bitmap block: blocksize
+ * summary blocks: new summary size
+ */
STATIC uint
-xfs_calc_growrtfree_reservation(xfs_mount_t *mp)
+xfs_calc_growrtfree_reservation(
+ struct xfs_mount *mp)
{
- return XFS_CALC_GROWRTFREE_LOG_RES(mp);
+ return mp->m_sb.sb_sectsize +
+ 2 * mp->m_sb.sb_inodesize +
+ mp->m_sb.sb_blocksize +
+ mp->m_rsumsize +
+ 128 * 5;
}
+/*
+ * Logging the inode modification timestamp on a synchronous write.
+ * inode
+ */
STATIC uint
-xfs_calc_swrite_reservation(xfs_mount_t *mp)
+xfs_calc_swrite_reservation(
+ struct xfs_mount *mp)
{
- return XFS_CALC_SWRITE_LOG_RES(mp);
+ return mp->m_sb.sb_inodesize + 128;
}
+/*
+ * Logging the inode mode bits when writing a setuid/setgid file
+ * inode
+ */
STATIC uint
xfs_calc_writeid_reservation(xfs_mount_t *mp)
{
- return XFS_CALC_WRITEID_LOG_RES(mp);
+ return mp->m_sb.sb_inodesize + 128;
}
+/*
+ * Converting the inode from non-attributed to attributed.
+ * the inode being converted: inode size
+ * agf block and superblock (for block allocation)
+ * the new block (directory sized)
+ * bmap blocks for the new directory block
+ * allocation btrees
+ */
STATIC uint
-xfs_calc_addafork_reservation(xfs_mount_t *mp)
+xfs_calc_addafork_reservation(
+ struct xfs_mount *mp)
{
- return XFS_CALC_ADDAFORK_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+ return XFS_DQUOT_LOGRES(mp) +
+ mp->m_sb.sb_inodesize +
+ mp->m_sb.sb_sectsize * 2 +
+ mp->m_dirblksize +
+ XFS_FSB_TO_B(mp, XFS_DAENTER_BMAP1B(mp, XFS_DATA_FORK) + 1) +
+ XFS_ALLOCFREE_LOG_RES(mp, 1) +
+ 128 * (4 + XFS_DAENTER_BMAP1B(mp, XFS_DATA_FORK) + 1 +
+ XFS_ALLOCFREE_LOG_COUNT(mp, 1));
}
+/*
+ * Removing the attribute fork of a file
+ * the inode being truncated: inode size
+ * the inode's bmap btree: max depth * block size
+ * And the bmap_finish transaction can free the blocks and bmap blocks:
+ * the agf for each of the ags: 4 * sector size
+ * the agfl for each of the ags: 4 * sector size
+ * the super block to reflect the freed blocks: sector size
+ * worst case split in allocation btrees per extent assuming 4 extents:
+ * 4 exts * 2 trees * (2 * max depth - 1) * block size
+ */
STATIC uint
-xfs_calc_attrinval_reservation(xfs_mount_t *mp)
+xfs_calc_attrinval_reservation(
+ struct xfs_mount *mp)
{
- return XFS_CALC_ATTRINVAL_LOG_RES(mp);
+ return MAX((mp->m_sb.sb_inodesize +
+ XFS_FSB_TO_B(mp, XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK)) +
+ 128 * (1 + XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK))),
+ (4 * mp->m_sb.sb_sectsize +
+ 4 * mp->m_sb.sb_sectsize +
+ mp->m_sb.sb_sectsize +
+ XFS_ALLOCFREE_LOG_RES(mp, 4) +
+ 128 * (9 + XFS_ALLOCFREE_LOG_COUNT(mp, 4))));
}
+/*
+ * Setting an attribute.
+ * the inode getting the attribute
+ * the superblock for allocations
+ * the agfs extents are allocated from
+ * the attribute btree * max depth
+ * the inode allocation btree
+ * Since attribute transaction space is dependent on the size of the attribute,
+ * the calculation is done partially at mount time and partially at runtime.
+ */
STATIC uint
-xfs_calc_attrset_reservation(xfs_mount_t *mp)
+xfs_calc_attrset_reservation(
+ struct xfs_mount *mp)
{
- return XFS_CALC_ATTRSET_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+ return XFS_DQUOT_LOGRES(mp) +
+ mp->m_sb.sb_inodesize +
+ mp->m_sb.sb_sectsize +
+ XFS_FSB_TO_B(mp, XFS_DA_NODE_MAXDEPTH) +
+ 128 * (2 + XFS_DA_NODE_MAXDEPTH);
}
+/*
+ * Removing an attribute.
+ * the inode: inode size
+ * the attribute btree could join: max depth * block size
+ * the inode bmap btree could join or split: max depth * block size
+ * And the bmap_finish transaction can free the attr blocks freed giving:
+ * the agf for the ag in which the blocks live: 2 * sector size
+ * the agfl for the ag in which the blocks live: 2 * sector size
+ * the superblock for the free block count: sector size
+ * the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
+ */
STATIC uint
-xfs_calc_attrrm_reservation(xfs_mount_t *mp)
+xfs_calc_attrrm_reservation(
+ struct xfs_mount *mp)
{
- return XFS_CALC_ATTRRM_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+ return XFS_DQUOT_LOGRES(mp) +
+ MAX((mp->m_sb.sb_inodesize +
+ XFS_FSB_TO_B(mp, XFS_DA_NODE_MAXDEPTH) +
+ XFS_FSB_TO_B(mp, XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK)) +
+ 128 * (1 + XFS_DA_NODE_MAXDEPTH +
+ XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK))),
+ (2 * mp->m_sb.sb_sectsize +
+ 2 * mp->m_sb.sb_sectsize +
+ mp->m_sb.sb_sectsize +
+ XFS_ALLOCFREE_LOG_RES(mp, 2) +
+ 128 * (5 + XFS_ALLOCFREE_LOG_COUNT(mp, 2))));
}
+/*
+ * Clearing a bad agino number in an agi hash bucket.
+ */
STATIC uint
-xfs_calc_clear_agi_bucket_reservation(xfs_mount_t *mp)
+xfs_calc_clear_agi_bucket_reservation(
+ struct xfs_mount *mp)
{
- return XFS_CALC_CLEAR_AGI_BUCKET_LOG_RES(mp);
+ return mp->m_sb.sb_sectsize + 128;
}
/*
@@ -184,11 +539,10 @@
*/
void
xfs_trans_init(
- xfs_mount_t *mp)
+ struct xfs_mount *mp)
{
- xfs_trans_reservations_t *resp;
+ struct xfs_trans_reservations *resp = &mp->m_reservations;
- resp = &(mp->m_reservations);
resp->tr_write = xfs_calc_write_reservation(mp);
resp->tr_itruncate = xfs_calc_itruncate_reservation(mp);
resp->tr_rename = xfs_calc_rename_reservation(mp);
diff --git a/fs/xfs/xfs_trans.h b/fs/xfs/xfs_trans.h
index 8c69e78..e639e8e 100644
--- a/fs/xfs/xfs_trans.h
+++ b/fs/xfs/xfs_trans.h
@@ -300,24 +300,6 @@
/*
- * Various log reservation values.
- * These are based on the size of the file system block
- * because that is what most transactions manipulate.
- * Each adds in an additional 128 bytes per item logged to
- * try to account for the overhead of the transaction mechanism.
- *
- * Note:
- * Most of the reservations underestimate the number of allocation
- * groups into which they could free extents in the xfs_bmap_finish()
- * call. This is because the number in the worst case is quite high
- * and quite unusual. In order to fix this we need to change
- * xfs_bmap_finish() to free extents in only a single AG at a time.
- * This will require changes to the EFI code as well, however, so that
- * the EFI for the extents not freed is logged again in each transaction.
- * See bug 261917.
- */
-
-/*
* Per-extent log reservation for the allocation btree changes
* involved in freeing or allocating an extent.
* 2 trees * (2 blocks/level * max depth - 1) * block size
@@ -341,429 +323,36 @@
(XFS_DAENTER_BLOCKS(mp, XFS_DATA_FORK) + \
XFS_DAENTER_BMAPS(mp, XFS_DATA_FORK) + 1)
-/*
- * In a write transaction we can allocate a maximum of 2
- * extents. This gives:
- * the inode getting the new extents: inode size
- * the inode's bmap btree: max depth * block size
- * the agfs of the ags from which the extents are allocated: 2 * sector
- * the superblock free block counter: sector size
- * the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
- * And the bmap_finish transaction can free bmap blocks in a join:
- * the agfs of the ags containing the blocks: 2 * sector size
- * the agfls of the ags containing the blocks: 2 * sector size
- * the super block free block counter: sector size
- * the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
- */
-#define XFS_CALC_WRITE_LOG_RES(mp) \
- (MAX( \
- ((mp)->m_sb.sb_inodesize + \
- XFS_FSB_TO_B((mp), XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK)) + \
- (2 * (mp)->m_sb.sb_sectsize) + \
- (mp)->m_sb.sb_sectsize + \
- XFS_ALLOCFREE_LOG_RES(mp, 2) + \
- (128 * (4 + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK) + XFS_ALLOCFREE_LOG_COUNT(mp, 2)))),\
- ((2 * (mp)->m_sb.sb_sectsize) + \
- (2 * (mp)->m_sb.sb_sectsize) + \
- (mp)->m_sb.sb_sectsize + \
- XFS_ALLOCFREE_LOG_RES(mp, 2) + \
- (128 * (5 + XFS_ALLOCFREE_LOG_COUNT(mp, 2))))))
#define XFS_WRITE_LOG_RES(mp) ((mp)->m_reservations.tr_write)
-
-/*
- * In truncating a file we free up to two extents at once. We can modify:
- * the inode being truncated: inode size
- * the inode's bmap btree: (max depth + 1) * block size
- * And the bmap_finish transaction can free the blocks and bmap blocks:
- * the agf for each of the ags: 4 * sector size
- * the agfl for each of the ags: 4 * sector size
- * the super block to reflect the freed blocks: sector size
- * worst case split in allocation btrees per extent assuming 4 extents:
- * 4 exts * 2 trees * (2 * max depth - 1) * block size
- * the inode btree: max depth * blocksize
- * the allocation btrees: 2 trees * (max depth - 1) * block size
- */
-#define XFS_CALC_ITRUNCATE_LOG_RES(mp) \
- (MAX( \
- ((mp)->m_sb.sb_inodesize + \
- XFS_FSB_TO_B((mp), XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK) + 1) + \
- (128 * (2 + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK)))), \
- ((4 * (mp)->m_sb.sb_sectsize) + \
- (4 * (mp)->m_sb.sb_sectsize) + \
- (mp)->m_sb.sb_sectsize + \
- XFS_ALLOCFREE_LOG_RES(mp, 4) + \
- (128 * (9 + XFS_ALLOCFREE_LOG_COUNT(mp, 4))) + \
- (128 * 5) + \
- XFS_ALLOCFREE_LOG_RES(mp, 1) + \
- (128 * (2 + XFS_IALLOC_BLOCKS(mp) + (mp)->m_in_maxlevels + \
- XFS_ALLOCFREE_LOG_COUNT(mp, 1))))))
-
#define XFS_ITRUNCATE_LOG_RES(mp) ((mp)->m_reservations.tr_itruncate)
-
-/*
- * In renaming a files we can modify:
- * the four inodes involved: 4 * inode size
- * the two directory btrees: 2 * (max depth + v2) * dir block size
- * the two directory bmap btrees: 2 * max depth * block size
- * And the bmap_finish transaction can free dir and bmap blocks (two sets
- * of bmap blocks) giving:
- * the agf for the ags in which the blocks live: 3 * sector size
- * the agfl for the ags in which the blocks live: 3 * sector size
- * the superblock for the free block count: sector size
- * the allocation btrees: 3 exts * 2 trees * (2 * max depth - 1) * block size
- */
-#define XFS_CALC_RENAME_LOG_RES(mp) \
- (MAX( \
- ((4 * (mp)->m_sb.sb_inodesize) + \
- (2 * XFS_DIROP_LOG_RES(mp)) + \
- (128 * (4 + 2 * XFS_DIROP_LOG_COUNT(mp)))), \
- ((3 * (mp)->m_sb.sb_sectsize) + \
- (3 * (mp)->m_sb.sb_sectsize) + \
- (mp)->m_sb.sb_sectsize + \
- XFS_ALLOCFREE_LOG_RES(mp, 3) + \
- (128 * (7 + XFS_ALLOCFREE_LOG_COUNT(mp, 3))))))
-
#define XFS_RENAME_LOG_RES(mp) ((mp)->m_reservations.tr_rename)
-
-/*
- * For creating a link to an inode:
- * the parent directory inode: inode size
- * the linked inode: inode size
- * the directory btree could split: (max depth + v2) * dir block size
- * the directory bmap btree could join or split: (max depth + v2) * blocksize
- * And the bmap_finish transaction can free some bmap blocks giving:
- * the agf for the ag in which the blocks live: sector size
- * the agfl for the ag in which the blocks live: sector size
- * the superblock for the free block count: sector size
- * the allocation btrees: 2 trees * (2 * max depth - 1) * block size
- */
-#define XFS_CALC_LINK_LOG_RES(mp) \
- (MAX( \
- ((mp)->m_sb.sb_inodesize + \
- (mp)->m_sb.sb_inodesize + \
- XFS_DIROP_LOG_RES(mp) + \
- (128 * (2 + XFS_DIROP_LOG_COUNT(mp)))), \
- ((mp)->m_sb.sb_sectsize + \
- (mp)->m_sb.sb_sectsize + \
- (mp)->m_sb.sb_sectsize + \
- XFS_ALLOCFREE_LOG_RES(mp, 1) + \
- (128 * (3 + XFS_ALLOCFREE_LOG_COUNT(mp, 1))))))
-
#define XFS_LINK_LOG_RES(mp) ((mp)->m_reservations.tr_link)
-
-/*
- * For removing a directory entry we can modify:
- * the parent directory inode: inode size
- * the removed inode: inode size
- * the directory btree could join: (max depth + v2) * dir block size
- * the directory bmap btree could join or split: (max depth + v2) * blocksize
- * And the bmap_finish transaction can free the dir and bmap blocks giving:
- * the agf for the ag in which the blocks live: 2 * sector size
- * the agfl for the ag in which the blocks live: 2 * sector size
- * the superblock for the free block count: sector size
- * the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
- */
-#define XFS_CALC_REMOVE_LOG_RES(mp) \
- (MAX( \
- ((mp)->m_sb.sb_inodesize + \
- (mp)->m_sb.sb_inodesize + \
- XFS_DIROP_LOG_RES(mp) + \
- (128 * (2 + XFS_DIROP_LOG_COUNT(mp)))), \
- ((2 * (mp)->m_sb.sb_sectsize) + \
- (2 * (mp)->m_sb.sb_sectsize) + \
- (mp)->m_sb.sb_sectsize + \
- XFS_ALLOCFREE_LOG_RES(mp, 2) + \
- (128 * (5 + XFS_ALLOCFREE_LOG_COUNT(mp, 2))))))
-
#define XFS_REMOVE_LOG_RES(mp) ((mp)->m_reservations.tr_remove)
-
-/*
- * For symlink we can modify:
- * the parent directory inode: inode size
- * the new inode: inode size
- * the inode btree entry: 1 block
- * the directory btree: (max depth + v2) * dir block size
- * the directory inode's bmap btree: (max depth + v2) * block size
- * the blocks for the symlink: 1 kB
- * Or in the first xact we allocate some inodes giving:
- * the agi and agf of the ag getting the new inodes: 2 * sectorsize
- * the inode blocks allocated: XFS_IALLOC_BLOCKS * blocksize
- * the inode btree: max depth * blocksize
- * the allocation btrees: 2 trees * (2 * max depth - 1) * block size
- */
-#define XFS_CALC_SYMLINK_LOG_RES(mp) \
- (MAX( \
- ((mp)->m_sb.sb_inodesize + \
- (mp)->m_sb.sb_inodesize + \
- XFS_FSB_TO_B(mp, 1) + \
- XFS_DIROP_LOG_RES(mp) + \
- 1024 + \
- (128 * (4 + XFS_DIROP_LOG_COUNT(mp)))), \
- (2 * (mp)->m_sb.sb_sectsize + \
- XFS_FSB_TO_B((mp), XFS_IALLOC_BLOCKS((mp))) + \
- XFS_FSB_TO_B((mp), (mp)->m_in_maxlevels) + \
- XFS_ALLOCFREE_LOG_RES(mp, 1) + \
- (128 * (2 + XFS_IALLOC_BLOCKS(mp) + (mp)->m_in_maxlevels + \
- XFS_ALLOCFREE_LOG_COUNT(mp, 1))))))
-
#define XFS_SYMLINK_LOG_RES(mp) ((mp)->m_reservations.tr_symlink)
-
-/*
- * For create we can modify:
- * the parent directory inode: inode size
- * the new inode: inode size
- * the inode btree entry: block size
- * the superblock for the nlink flag: sector size
- * the directory btree: (max depth + v2) * dir block size
- * the directory inode's bmap btree: (max depth + v2) * block size
- * Or in the first xact we allocate some inodes giving:
- * the agi and agf of the ag getting the new inodes: 2 * sectorsize
- * the superblock for the nlink flag: sector size
- * the inode blocks allocated: XFS_IALLOC_BLOCKS * blocksize
- * the inode btree: max depth * blocksize
- * the allocation btrees: 2 trees * (max depth - 1) * block size
- */
-#define XFS_CALC_CREATE_LOG_RES(mp) \
- (MAX( \
- ((mp)->m_sb.sb_inodesize + \
- (mp)->m_sb.sb_inodesize + \
- (mp)->m_sb.sb_sectsize + \
- XFS_FSB_TO_B(mp, 1) + \
- XFS_DIROP_LOG_RES(mp) + \
- (128 * (3 + XFS_DIROP_LOG_COUNT(mp)))), \
- (3 * (mp)->m_sb.sb_sectsize + \
- XFS_FSB_TO_B((mp), XFS_IALLOC_BLOCKS((mp))) + \
- XFS_FSB_TO_B((mp), (mp)->m_in_maxlevels) + \
- XFS_ALLOCFREE_LOG_RES(mp, 1) + \
- (128 * (2 + XFS_IALLOC_BLOCKS(mp) + (mp)->m_in_maxlevels + \
- XFS_ALLOCFREE_LOG_COUNT(mp, 1))))))
-
#define XFS_CREATE_LOG_RES(mp) ((mp)->m_reservations.tr_create)
-
-/*
- * Making a new directory is the same as creating a new file.
- */
-#define XFS_CALC_MKDIR_LOG_RES(mp) XFS_CALC_CREATE_LOG_RES(mp)
-
#define XFS_MKDIR_LOG_RES(mp) ((mp)->m_reservations.tr_mkdir)
-
-/*
- * In freeing an inode we can modify:
- * the inode being freed: inode size
- * the super block free inode counter: sector size
- * the agi hash list and counters: sector size
- * the inode btree entry: block size
- * the on disk inode before ours in the agi hash list: inode cluster size
- * the inode btree: max depth * blocksize
- * the allocation btrees: 2 trees * (max depth - 1) * block size
- */
-#define XFS_CALC_IFREE_LOG_RES(mp) \
- ((mp)->m_sb.sb_inodesize + \
- (mp)->m_sb.sb_sectsize + \
- (mp)->m_sb.sb_sectsize + \
- XFS_FSB_TO_B((mp), 1) + \
- MAX((__uint16_t)XFS_FSB_TO_B((mp), 1), XFS_INODE_CLUSTER_SIZE(mp)) + \
- (128 * 5) + \
- XFS_ALLOCFREE_LOG_RES(mp, 1) + \
- (128 * (2 + XFS_IALLOC_BLOCKS(mp) + (mp)->m_in_maxlevels + \
- XFS_ALLOCFREE_LOG_COUNT(mp, 1))))
-
-
#define XFS_IFREE_LOG_RES(mp) ((mp)->m_reservations.tr_ifree)
-
-/*
- * When only changing the inode we log the inode and possibly the superblock
- * We also add a bit of slop for the transaction stuff.
- */
-#define XFS_CALC_ICHANGE_LOG_RES(mp) ((mp)->m_sb.sb_inodesize + \
- (mp)->m_sb.sb_sectsize + 512)
-
#define XFS_ICHANGE_LOG_RES(mp) ((mp)->m_reservations.tr_ichange)
-
-/*
- * Growing the data section of the filesystem.
- * superblock
- * agi and agf
- * allocation btrees
- */
-#define XFS_CALC_GROWDATA_LOG_RES(mp) \
- ((mp)->m_sb.sb_sectsize * 3 + \
- XFS_ALLOCFREE_LOG_RES(mp, 1) + \
- (128 * (3 + XFS_ALLOCFREE_LOG_COUNT(mp, 1))))
-
#define XFS_GROWDATA_LOG_RES(mp) ((mp)->m_reservations.tr_growdata)
-
-/*
- * Growing the rt section of the filesystem.
- * In the first set of transactions (ALLOC) we allocate space to the
- * bitmap or summary files.
- * superblock: sector size
- * agf of the ag from which the extent is allocated: sector size
- * bmap btree for bitmap/summary inode: max depth * blocksize
- * bitmap/summary inode: inode size
- * allocation btrees for 1 block alloc: 2 * (2 * maxdepth - 1) * blocksize
- */
-#define XFS_CALC_GROWRTALLOC_LOG_RES(mp) \
- (2 * (mp)->m_sb.sb_sectsize + \
- XFS_FSB_TO_B((mp), XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK)) + \
- (mp)->m_sb.sb_inodesize + \
- XFS_ALLOCFREE_LOG_RES(mp, 1) + \
- (128 * \
- (3 + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK) + \
- XFS_ALLOCFREE_LOG_COUNT(mp, 1))))
-
#define XFS_GROWRTALLOC_LOG_RES(mp) ((mp)->m_reservations.tr_growrtalloc)
-
-/*
- * Growing the rt section of the filesystem.
- * In the second set of transactions (ZERO) we zero the new metadata blocks.
- * one bitmap/summary block: blocksize
- */
-#define XFS_CALC_GROWRTZERO_LOG_RES(mp) \
- ((mp)->m_sb.sb_blocksize + 128)
-
#define XFS_GROWRTZERO_LOG_RES(mp) ((mp)->m_reservations.tr_growrtzero)
-
-/*
- * Growing the rt section of the filesystem.
- * In the third set of transactions (FREE) we update metadata without
- * allocating any new blocks.
- * superblock: sector size
- * bitmap inode: inode size
- * summary inode: inode size
- * one bitmap block: blocksize
- * summary blocks: new summary size
- */
-#define XFS_CALC_GROWRTFREE_LOG_RES(mp) \
- ((mp)->m_sb.sb_sectsize + \
- 2 * (mp)->m_sb.sb_inodesize + \
- (mp)->m_sb.sb_blocksize + \
- (mp)->m_rsumsize + \
- (128 * 5))
-
#define XFS_GROWRTFREE_LOG_RES(mp) ((mp)->m_reservations.tr_growrtfree)
-
-/*
- * Logging the inode modification timestamp on a synchronous write.
- * inode
- */
-#define XFS_CALC_SWRITE_LOG_RES(mp) \
- ((mp)->m_sb.sb_inodesize + 128)
-
#define XFS_SWRITE_LOG_RES(mp) ((mp)->m_reservations.tr_swrite)
-
/*
* Logging the inode timestamps on an fsync -- same as SWRITE
* as long as SWRITE logs the entire inode core
*/
#define XFS_FSYNC_TS_LOG_RES(mp) ((mp)->m_reservations.tr_swrite)
-
-/*
- * Logging the inode mode bits when writing a setuid/setgid file
- * inode
- */
-#define XFS_CALC_WRITEID_LOG_RES(mp) \
- ((mp)->m_sb.sb_inodesize + 128)
-
#define XFS_WRITEID_LOG_RES(mp) ((mp)->m_reservations.tr_swrite)
-
-/*
- * Converting the inode from non-attributed to attributed.
- * the inode being converted: inode size
- * agf block and superblock (for block allocation)
- * the new block (directory sized)
- * bmap blocks for the new directory block
- * allocation btrees
- */
-#define XFS_CALC_ADDAFORK_LOG_RES(mp) \
- ((mp)->m_sb.sb_inodesize + \
- (mp)->m_sb.sb_sectsize * 2 + \
- (mp)->m_dirblksize + \
- XFS_FSB_TO_B(mp, (XFS_DAENTER_BMAP1B(mp, XFS_DATA_FORK) + 1)) + \
- XFS_ALLOCFREE_LOG_RES(mp, 1) + \
- (128 * (4 + (XFS_DAENTER_BMAP1B(mp, XFS_DATA_FORK) + 1) + \
- XFS_ALLOCFREE_LOG_COUNT(mp, 1))))
-
#define XFS_ADDAFORK_LOG_RES(mp) ((mp)->m_reservations.tr_addafork)
-
-/*
- * Removing the attribute fork of a file
- * the inode being truncated: inode size
- * the inode's bmap btree: max depth * block size
- * And the bmap_finish transaction can free the blocks and bmap blocks:
- * the agf for each of the ags: 4 * sector size
- * the agfl for each of the ags: 4 * sector size
- * the super block to reflect the freed blocks: sector size
- * worst case split in allocation btrees per extent assuming 4 extents:
- * 4 exts * 2 trees * (2 * max depth - 1) * block size
- */
-#define XFS_CALC_ATTRINVAL_LOG_RES(mp) \
- (MAX( \
- ((mp)->m_sb.sb_inodesize + \
- XFS_FSB_TO_B((mp), XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK)) + \
- (128 * (1 + XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK)))), \
- ((4 * (mp)->m_sb.sb_sectsize) + \
- (4 * (mp)->m_sb.sb_sectsize) + \
- (mp)->m_sb.sb_sectsize + \
- XFS_ALLOCFREE_LOG_RES(mp, 4) + \
- (128 * (9 + XFS_ALLOCFREE_LOG_COUNT(mp, 4))))))
-
#define XFS_ATTRINVAL_LOG_RES(mp) ((mp)->m_reservations.tr_attrinval)
-
-/*
- * Setting an attribute.
- * the inode getting the attribute
- * the superblock for allocations
- * the agfs extents are allocated from
- * the attribute btree * max depth
- * the inode allocation btree
- * Since attribute transaction space is dependent on the size of the attribute,
- * the calculation is done partially at mount time and partially at runtime.
- */
-#define XFS_CALC_ATTRSET_LOG_RES(mp) \
- ((mp)->m_sb.sb_inodesize + \
- (mp)->m_sb.sb_sectsize + \
- XFS_FSB_TO_B((mp), XFS_DA_NODE_MAXDEPTH) + \
- (128 * (2 + XFS_DA_NODE_MAXDEPTH)))
-
#define XFS_ATTRSET_LOG_RES(mp, ext) \
((mp)->m_reservations.tr_attrset + \
(ext * (mp)->m_sb.sb_sectsize) + \
(ext * XFS_FSB_TO_B((mp), XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK))) + \
(128 * (ext + (ext * XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK)))))
-
-/*
- * Removing an attribute.
- * the inode: inode size
- * the attribute btree could join: max depth * block size
- * the inode bmap btree could join or split: max depth * block size
- * And the bmap_finish transaction can free the attr blocks freed giving:
- * the agf for the ag in which the blocks live: 2 * sector size
- * the agfl for the ag in which the blocks live: 2 * sector size
- * the superblock for the free block count: sector size
- * the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
- */
-#define XFS_CALC_ATTRRM_LOG_RES(mp) \
- (MAX( \
- ((mp)->m_sb.sb_inodesize + \
- XFS_FSB_TO_B((mp), XFS_DA_NODE_MAXDEPTH) + \
- XFS_FSB_TO_B((mp), XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK)) + \
- (128 * (1 + XFS_DA_NODE_MAXDEPTH + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK)))), \
- ((2 * (mp)->m_sb.sb_sectsize) + \
- (2 * (mp)->m_sb.sb_sectsize) + \
- (mp)->m_sb.sb_sectsize + \
- XFS_ALLOCFREE_LOG_RES(mp, 2) + \
- (128 * (5 + XFS_ALLOCFREE_LOG_COUNT(mp, 2))))))
-
#define XFS_ATTRRM_LOG_RES(mp) ((mp)->m_reservations.tr_attrrm)
-
-/*
- * Clearing a bad agino number in an agi hash bucket.
- */
-#define XFS_CALC_CLEAR_AGI_BUCKET_LOG_RES(mp) \
- ((mp)->m_sb.sb_sectsize + 128)
-
#define XFS_CLEAR_AGI_BUCKET_LOG_RES(mp) ((mp)->m_reservations.tr_clearagi)
diff --git a/fs/xfs/xfs_trans_inode.c b/fs/xfs/xfs_trans_inode.c
index 785ff10..2559dfe 100644
--- a/fs/xfs/xfs_trans_inode.c
+++ b/fs/xfs/xfs_trans_inode.c
@@ -62,7 +62,7 @@
{
int error;
- error = xfs_iget(mp, tp, ino, flags, lock_flags, ipp, 0);
+ error = xfs_iget(mp, tp, ino, flags, lock_flags, ipp);
if (!error && tp)
xfs_trans_ijoin(tp, *ipp, lock_flags);
return error;
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 9d376be..c164683 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -267,7 +267,7 @@
if (code) {
ASSERT(tp == NULL);
lock_flags &= ~XFS_ILOCK_EXCL;
- ASSERT(lock_flags == XFS_IOLOCK_EXCL);
+ ASSERT(lock_flags == XFS_IOLOCK_EXCL || !need_iolock);
goto error_return;
}
tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_SIZE);
@@ -1269,7 +1269,7 @@
if (error)
goto out;
- error = xfs_iget(dp->i_mount, NULL, inum, 0, 0, ipp, 0);
+ error = xfs_iget(dp->i_mount, NULL, inum, 0, 0, ipp);
if (error)
goto out_free_name;
diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h
index 5958d78..17714be 100644
--- a/include/acpi/acexcep.h
+++ b/include/acpi/acexcep.h
@@ -212,7 +212,7 @@
"AE_NO_GLOBAL_LOCK",
"AE_ABORT_METHOD",
"AE_SAME_HANDLER",
- "AE_WAKE_ONLY_GPE",
+ "AE_NO_HANDLER",
"AE_OWNER_ID_LIMIT"
};
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 7bf83dd..baacd98 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -373,7 +373,7 @@
struct acpi_pci_id id;
struct pci_bus *bus;
u16 segment;
- u8 bus_nr;
+ struct resource secondary; /* downstream bus range */
u32 osc_support_set; /* _OSC state of support bits */
u32 osc_control_set; /* _OSC state of control bits */
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index 4f7b448..23d78b4 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -104,8 +104,7 @@
/* Arch-defined function to add a bus to the system */
-struct pci_bus *pci_acpi_scan_root(struct acpi_device *device, int domain,
- int bus);
+struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root);
void pci_acpi_crs_quirks(void);
/* --------------------------------------------------------------------------
diff --git a/include/acpi/acpi_hest.h b/include/acpi/acpi_hest.h
deleted file mode 100644
index 63194d0..0000000
--- a/include/acpi/acpi_hest.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __ACPI_HEST_H
-#define __ACPI_HEST_H
-
-#include <linux/pci.h>
-
-#ifdef CONFIG_ACPI
-extern int acpi_hest_firmware_first_pci(struct pci_dev *pci);
-#else
-static inline int acpi_hest_firmware_first_pci(struct pci_dev *pci) { return 0; }
-#endif
-
-#endif
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 0e4ab1f..1371cc9 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -69,6 +69,7 @@
extern u32 acpi_gbl_trace_flags;
extern u8 acpi_gbl_enable_aml_debug_object;
extern u8 acpi_gbl_copy_dsdt_locally;
+extern u8 acpi_gbl_truncate_io_addresses;
extern u32 acpi_current_gpe_count;
extern struct acpi_table_fadt acpi_gbl_FADT;
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index bade172..d55f4a7 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -663,10 +663,11 @@
#define ACPI_GPE_MAX 0xFF
#define ACPI_NUM_GPE 256
-/* Actions for acpi_set_gpe */
+/* Actions for acpi_set_gpe and acpi_hw_low_set_gpe */
#define ACPI_GPE_ENABLE 0
#define ACPI_GPE_DISABLE 1
+#define ACPI_GPE_COND_ENABLE 2
/* gpe_types for acpi_enable_gpe and acpi_disable_gpe */
diff --git a/include/acpi/apei.h b/include/acpi/apei.h
new file mode 100644
index 0000000..b336502
--- /dev/null
+++ b/include/acpi/apei.h
@@ -0,0 +1,34 @@
+/*
+ * apei.h - ACPI Platform Error Interface
+ */
+
+#ifndef ACPI_APEI_H
+#define ACPI_APEI_H
+
+#include <linux/acpi.h>
+#include <linux/cper.h>
+#include <asm/ioctls.h>
+
+#define APEI_ERST_INVALID_RECORD_ID 0xffffffffffffffffULL
+
+#define APEI_ERST_CLEAR_RECORD _IOW('E', 1, u64)
+#define APEI_ERST_GET_RECORD_COUNT _IOR('E', 2, u32)
+
+#ifdef __KERNEL__
+
+extern int hest_disable;
+extern int erst_disable;
+
+typedef int (*apei_hest_func_t)(struct acpi_hest_header *hest_hdr, void *data);
+int apei_hest_parse(apei_hest_func_t func, void *data);
+
+int erst_write(const struct cper_record_header *record);
+ssize_t erst_get_record_count(void);
+int erst_get_next_record_id(u64 *record_id);
+ssize_t erst_read(u64 record_id, struct cper_record_header *record,
+ size_t buflen);
+ssize_t erst_read_next(struct cper_record_header *record, size_t buflen);
+int erst_clear(u64 record_id);
+
+#endif
+#endif
diff --git a/include/acpi/atomicio.h b/include/acpi/atomicio.h
new file mode 100644
index 0000000..8b9fb4b
--- /dev/null
+++ b/include/acpi/atomicio.h
@@ -0,0 +1,10 @@
+#ifndef ACPI_ATOMIC_IO_H
+#define ACPI_ATOMIC_IO_H
+
+int acpi_pre_map_gar(struct acpi_generic_address *reg);
+int acpi_post_unmap_gar(struct acpi_generic_address *reg);
+
+int acpi_atomic_read(u64 *val, struct acpi_generic_address *reg);
+int acpi_atomic_write(u64 val, struct acpi_generic_address *reg);
+
+#endif
diff --git a/include/acpi/hed.h b/include/acpi/hed.h
new file mode 100644
index 0000000..46e1249
--- /dev/null
+++ b/include/acpi/hed.h
@@ -0,0 +1,18 @@
+/*
+ * hed.h - ACPI Hardware Error Device
+ *
+ * Copyright (C) 2009, Intel Corp.
+ * Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This file is released under the GPLv2.
+ */
+
+#ifndef ACPI_HED_H
+#define ACPI_HED_H
+
+#include <linux/notifier.h>
+
+int register_acpi_hed_notifier(struct notifier_block *nb);
+void unregister_acpi_hed_notifier(struct notifier_block *nb);
+
+#endif
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 86825dd..da565a4 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -52,17 +52,6 @@
u64 address;
} __attribute__ ((packed));
-struct acpi_processor_cx_policy {
- u32 count;
- struct acpi_processor_cx *state;
- struct {
- u32 time;
- u32 ticks;
- u32 count;
- u32 bm;
- } threshold;
-};
-
struct acpi_processor_cx {
u8 valid;
u8 type;
@@ -74,8 +63,6 @@
u32 power;
u32 usage;
u64 time;
- struct acpi_processor_cx_policy promotion;
- struct acpi_processor_cx_policy demotion;
char desc[ACPI_CX_DESC_LEN];
};
diff --git a/include/acpi/video.h b/include/acpi/video.h
index cf7be3d..551793c 100644
--- a/include/acpi/video.h
+++ b/include/acpi/video.h
@@ -1,12 +1,28 @@
#ifndef __ACPI_VIDEO_H
#define __ACPI_VIDEO_H
+#define ACPI_VIDEO_DISPLAY_CRT 1
+#define ACPI_VIDEO_DISPLAY_TV 2
+#define ACPI_VIDEO_DISPLAY_DVI 3
+#define ACPI_VIDEO_DISPLAY_LCD 4
+
+#define ACPI_VIDEO_DISPLAY_LEGACY_MONITOR 0x0100
+#define ACPI_VIDEO_DISPLAY_LEGACY_PANEL 0x0110
+#define ACPI_VIDEO_DISPLAY_LEGACY_TV 0x0200
+
#if (defined CONFIG_ACPI_VIDEO || defined CONFIG_ACPI_VIDEO_MODULE)
extern int acpi_video_register(void);
extern void acpi_video_unregister(void);
+extern int acpi_video_get_edid(struct acpi_device *device, int type,
+ int device_id, void **edid);
#else
static inline int acpi_video_register(void) { return 0; }
static inline void acpi_video_unregister(void) { return; }
+static inline int acpi_video_get_edid(struct acpi_device *device, int type,
+ int device_id, void **edid)
+{
+ return -ENODEV;
+}
#endif
#endif
diff --git a/include/asm-generic/dma-mapping-common.h b/include/asm-generic/dma-mapping-common.h
index 6920695..0c80bb3 100644
--- a/include/asm-generic/dma-mapping-common.h
+++ b/include/asm-generic/dma-mapping-common.h
@@ -123,15 +123,7 @@
size_t size,
enum dma_data_direction dir)
{
- struct dma_map_ops *ops = get_dma_ops(dev);
-
- BUG_ON(!valid_dma_direction(dir));
- if (ops->sync_single_range_for_cpu) {
- ops->sync_single_range_for_cpu(dev, addr, offset, size, dir);
- debug_dma_sync_single_range_for_cpu(dev, addr, offset, size, dir);
-
- } else
- dma_sync_single_for_cpu(dev, addr + offset, size, dir);
+ dma_sync_single_for_cpu(dev, addr + offset, size, dir);
}
static inline void dma_sync_single_range_for_device(struct device *dev,
@@ -140,15 +132,7 @@
size_t size,
enum dma_data_direction dir)
{
- struct dma_map_ops *ops = get_dma_ops(dev);
-
- BUG_ON(!valid_dma_direction(dir));
- if (ops->sync_single_range_for_device) {
- ops->sync_single_range_for_device(dev, addr, offset, size, dir);
- debug_dma_sync_single_range_for_device(dev, addr, offset, size, dir);
-
- } else
- dma_sync_single_for_device(dev, addr + offset, size, dir);
+ dma_sync_single_for_device(dev, addr + offset, size, dir);
}
static inline void
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 979c6a5..4f3d75e 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -60,7 +60,9 @@
* @names: if set, must be an array of strings to use as alternative
* names for the GPIOs in this chip. Any entry in the array
* may be NULL if there is no alias for the GPIO, however the
- * array must be @ngpio entries long.
+ * array must be @ngpio entries long. A name can include a single printk
+ * format specifier for an unsigned int. It is substituted by the actual
+ * number of the gpio.
*
* A gpio_chip can help platforms abstract various sources of GPIOs so
* they can all be accessed through a common programing interface.
@@ -88,6 +90,9 @@
unsigned offset);
int (*direction_output)(struct gpio_chip *chip,
unsigned offset, int value);
+ int (*set_debounce)(struct gpio_chip *chip,
+ unsigned offset, unsigned debounce);
+
void (*set)(struct gpio_chip *chip,
unsigned offset, int value);
@@ -98,7 +103,7 @@
struct gpio_chip *chip);
int base;
u16 ngpio;
- char **names;
+ const char *const *names;
unsigned can_sleep:1;
unsigned exported:1;
};
@@ -121,6 +126,8 @@
extern int gpio_direction_input(unsigned gpio);
extern int gpio_direction_output(unsigned gpio, int value);
+extern int gpio_set_debounce(unsigned gpio, unsigned debounce);
+
extern int gpio_get_value_cansleep(unsigned gpio);
extern void gpio_set_value_cansleep(unsigned gpio, int value);
diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h
index 04f91c2..b5043a9 100644
--- a/include/asm-generic/percpu.h
+++ b/include/asm-generic/percpu.h
@@ -80,7 +80,7 @@
#ifndef PER_CPU_BASE_SECTION
#ifdef CONFIG_SMP
-#define PER_CPU_BASE_SECTION ".data.percpu"
+#define PER_CPU_BASE_SECTION ".data..percpu"
#else
#define PER_CPU_BASE_SECTION ".data"
#endif
@@ -92,15 +92,15 @@
#define PER_CPU_SHARED_ALIGNED_SECTION ""
#define PER_CPU_ALIGNED_SECTION ""
#else
-#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
-#define PER_CPU_ALIGNED_SECTION ".shared_aligned"
+#define PER_CPU_SHARED_ALIGNED_SECTION "..shared_aligned"
+#define PER_CPU_ALIGNED_SECTION "..shared_aligned"
#endif
-#define PER_CPU_FIRST_SECTION ".first"
+#define PER_CPU_FIRST_SECTION "..first"
#else
#define PER_CPU_SHARED_ALIGNED_SECTION ""
-#define PER_CPU_ALIGNED_SECTION ".shared_aligned"
+#define PER_CPU_ALIGNED_SECTION "..shared_aligned"
#define PER_CPU_FIRST_SECTION ""
#endif
diff --git a/include/asm-generic/scatterlist.h b/include/asm-generic/scatterlist.h
index 8b94544..5de0735 100644
--- a/include/asm-generic/scatterlist.h
+++ b/include/asm-generic/scatterlist.h
@@ -11,7 +11,9 @@
unsigned int offset;
unsigned int length;
dma_addr_t dma_address;
+#ifdef CONFIG_NEED_SG_DMA_LENGTH
unsigned int dma_length;
+#endif
};
/*
@@ -22,22 +24,11 @@
* is 0.
*/
#define sg_dma_address(sg) ((sg)->dma_address)
-#ifndef sg_dma_len
-/*
- * Normally, you have an iommu on 64 bit machines, but not on 32 bit
- * machines. Architectures that are differnt should override this.
- */
-#if __BITS_PER_LONG == 64
+
+#ifdef CONFIG_NEED_SG_DMA_LENGTH
#define sg_dma_len(sg) ((sg)->dma_length)
#else
#define sg_dma_len(sg) ((sg)->length)
-#endif /* 64 bit */
-#endif /* sg_dma_len */
-
-#ifndef ISA_DMA_THRESHOLD
-#define ISA_DMA_THRESHOLD (~0UL)
#endif
-#define ARCH_HAS_SG_CHAIN
-
#endif /* __ASM_GENERIC_SCATTERLIST_H */
diff --git a/include/asm-generic/topology.h b/include/asm-generic/topology.h
index 510df36..fd60700 100644
--- a/include/asm-generic/topology.h
+++ b/include/asm-generic/topology.h
@@ -34,6 +34,9 @@
#ifndef cpu_to_node
#define cpu_to_node(cpu) ((void)(cpu),0)
#endif
+#ifndef cpu_to_mem
+#define cpu_to_mem(cpu) ((void)(cpu),0)
+#endif
#ifndef parent_node
#define parent_node(node) ((void)(node),0)
#endif
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 67e6520..48c5299 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -175,25 +175,25 @@
#define NOSAVE_DATA \
. = ALIGN(PAGE_SIZE); \
VMLINUX_SYMBOL(__nosave_begin) = .; \
- *(.data.nosave) \
+ *(.data..nosave) \
. = ALIGN(PAGE_SIZE); \
VMLINUX_SYMBOL(__nosave_end) = .;
#define PAGE_ALIGNED_DATA(page_align) \
. = ALIGN(page_align); \
- *(.data.page_aligned)
+ *(.data..page_aligned)
#define READ_MOSTLY_DATA(align) \
. = ALIGN(align); \
- *(.data.read_mostly)
+ *(.data..read_mostly)
#define CACHELINE_ALIGNED_DATA(align) \
. = ALIGN(align); \
- *(.data.cacheline_aligned)
+ *(.data..cacheline_aligned)
#define INIT_TASK_DATA(align) \
. = ALIGN(align); \
- *(.data.init_task)
+ *(.data..init_task)
/*
* Read only Data
@@ -247,10 +247,10 @@
} \
\
/* RapidIO route ops */ \
- .rio_route : AT(ADDR(.rio_route) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start_rio_route_ops) = .; \
- *(.rio_route_ops) \
- VMLINUX_SYMBOL(__end_rio_route_ops) = .; \
+ .rio_ops : AT(ADDR(.rio_ops) - LOAD_OFFSET) { \
+ VMLINUX_SYMBOL(__start_rio_switch_ops) = .; \
+ *(.rio_switch_ops) \
+ VMLINUX_SYMBOL(__end_rio_switch_ops) = .; \
} \
\
TRACEDATA \
@@ -435,7 +435,7 @@
*/
#define INIT_TASK_DATA_SECTION(align) \
. = ALIGN(align); \
- .data.init_task : { \
+ .data..init_task : { \
INIT_TASK_DATA(align) \
}
@@ -499,7 +499,7 @@
#define BSS(bss_align) \
. = ALIGN(bss_align); \
.bss : AT(ADDR(.bss) - LOAD_OFFSET) { \
- *(.bss.page_aligned) \
+ *(.bss..page_aligned) \
*(.dynbss) \
*(.bss) \
*(COMMON) \
@@ -666,16 +666,16 @@
*/
#define PERCPU_VADDR(vaddr, phdr) \
VMLINUX_SYMBOL(__per_cpu_load) = .; \
- .data.percpu vaddr : AT(VMLINUX_SYMBOL(__per_cpu_load) \
+ .data..percpu vaddr : AT(VMLINUX_SYMBOL(__per_cpu_load) \
- LOAD_OFFSET) { \
VMLINUX_SYMBOL(__per_cpu_start) = .; \
- *(.data.percpu.first) \
- *(.data.percpu.page_aligned) \
- *(.data.percpu) \
- *(.data.percpu.shared_aligned) \
+ *(.data..percpu..first) \
+ *(.data..percpu..page_aligned) \
+ *(.data..percpu) \
+ *(.data..percpu..shared_aligned) \
VMLINUX_SYMBOL(__per_cpu_end) = .; \
} phdr \
- . = VMLINUX_SYMBOL(__per_cpu_load) + SIZEOF(.data.percpu);
+ . = VMLINUX_SYMBOL(__per_cpu_load) + SIZEOF(.data..percpu);
/**
* PERCPU - define output section for percpu area, simple version
@@ -687,18 +687,18 @@
*
* This macro is equivalent to ALIGN(align); PERCPU_VADDR( , ) except
* that __per_cpu_load is defined as a relative symbol against
- * .data.percpu which is required for relocatable x86_32
+ * .data..percpu which is required for relocatable x86_32
* configuration.
*/
#define PERCPU(align) \
. = ALIGN(align); \
- .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { \
+ .data..percpu : AT(ADDR(.data..percpu) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__per_cpu_load) = .; \
VMLINUX_SYMBOL(__per_cpu_start) = .; \
- *(.data.percpu.first) \
- *(.data.percpu.page_aligned) \
- *(.data.percpu) \
- *(.data.percpu.shared_aligned) \
+ *(.data..percpu..first) \
+ *(.data..percpu..page_aligned) \
+ *(.data..percpu) \
+ *(.data..percpu..shared_aligned) \
VMLINUX_SYMBOL(__per_cpu_end) = .; \
}
diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h
index dc5873c..1121f77 100644
--- a/include/drm/drm_crtc_helper.h
+++ b/include/drm/drm_crtc_helper.h
@@ -130,4 +130,7 @@
extern void drm_kms_helper_poll_init(struct drm_device *dev);
extern void drm_kms_helper_poll_fini(struct drm_device *dev);
extern void drm_helper_hpd_irq_event(struct drm_device *dev);
+
+extern void drm_kms_helper_poll_disable(struct drm_device *dev);
+extern void drm_kms_helper_poll_enable(struct drm_device *dev);
#endif
diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h
index b64a8d7..7f0028e 100644
--- a/include/drm/i915_drm.h
+++ b/include/drm/i915_drm.h
@@ -275,6 +275,7 @@
#define I915_PARAM_HAS_OVERLAY 7
#define I915_PARAM_HAS_PAGEFLIPPING 8
#define I915_PARAM_HAS_EXECBUF2 9
+#define I915_PARAM_HAS_BSD 10
typedef struct drm_i915_getparam {
int param;
@@ -616,7 +617,9 @@
__u32 num_cliprects;
/** This is a struct drm_clip_rect *cliprects */
__u64 cliprects_ptr;
- __u64 flags; /* currently unused */
+#define I915_EXEC_RENDER (1<<0)
+#define I915_EXEC_BSD (1<<1)
+ __u64 flags;
__u64 rsvd1;
__u64 rsvd2;
};
diff --git a/include/drm/nouveau_drm.h b/include/drm/nouveau_drm.h
index a6a9f4a..fe917de 100644
--- a/include/drm/nouveau_drm.h
+++ b/include/drm/nouveau_drm.h
@@ -79,6 +79,7 @@
#define NOUVEAU_GETPARAM_CHIPSET_ID 11
#define NOUVEAU_GETPARAM_VM_VRAM_BASE 12
#define NOUVEAU_GETPARAM_GRAPH_UNITS 13
+#define NOUVEAU_GETPARAM_PTIMER_TIME 14
struct drm_nouveau_getparam {
uint64_t param;
uint64_t value;
diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h
index 3ff9fc0..5347063 100644
--- a/include/drm/radeon_drm.h
+++ b/include/drm/radeon_drm.h
@@ -903,6 +903,7 @@
#define RADEON_INFO_NUM_Z_PIPES 0x02
#define RADEON_INFO_ACCEL_WORKING 0x03
#define RADEON_INFO_CRTC_FROM_ID 0x04
+#define RADEON_INFO_ACCEL_WORKING2 0x05
struct drm_radeon_info {
uint32_t request;
diff --git a/include/drm/ttm/ttm_page_alloc.h b/include/drm/ttm/ttm_page_alloc.h
index 8bb4de5..1168214 100644
--- a/include/drm/ttm/ttm_page_alloc.h
+++ b/include/drm/ttm/ttm_page_alloc.h
@@ -56,10 +56,6 @@
enum ttm_caching_state cstate);
/**
* Initialize pool allocator.
- *
- * Pool allocator is internaly reference counted so it can be initialized
- * multiple times but ttm_page_alloc_fini has to be called same number of
- * times.
*/
int ttm_page_alloc_init(struct ttm_mem_global *glob, unsigned max_pages);
/**
diff --git a/include/drm/vmwgfx_drm.h b/include/drm/vmwgfx_drm.h
index c7645f4..4d08423 100644
--- a/include/drm/vmwgfx_drm.h
+++ b/include/drm/vmwgfx_drm.h
@@ -50,6 +50,8 @@
#define DRM_VMW_EXECBUF 12
#define DRM_VMW_FIFO_DEBUG 13
#define DRM_VMW_FENCE_WAIT 14
+/* guarded by minor version >= 2 */
+#define DRM_VMW_UPDATE_LAYOUT 15
/*************************************************************************/
@@ -585,4 +587,28 @@
* sure that the stream has been stopped.
*/
+/*************************************************************************/
+/**
+ * DRM_VMW_UPDATE_LAYOUT - Update layout
+ *
+ * Updates the prefered modes and connection status for connectors. The
+ * command conisits of one drm_vmw_update_layout_arg pointing out a array
+ * of num_outputs drm_vmw_rect's.
+ */
+
+/**
+ * struct drm_vmw_update_layout_arg
+ *
+ * @num_outputs: number of active
+ * @rects: pointer to array of drm_vmw_rect
+ *
+ * Input argument to the DRM_VMW_UPDATE_LAYOUT Ioctl.
+ */
+
+struct drm_vmw_update_layout_arg {
+ uint32_t num_outputs;
+ uint32_t pad64;
+ uint64_t rects;
+};
+
#endif
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 3da73f5..224a38c 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -248,11 +248,12 @@
int acpi_check_mem_region(resource_size_t start, resource_size_t n,
const char *name);
+int acpi_resources_are_enforced(void);
+
#ifdef CONFIG_PM_SLEEP
void __init acpi_no_s4_hw_signature(void);
void __init acpi_old_suspend_ordering(void);
void __init acpi_s4_no_nvs(void);
-void __init acpi_set_sci_en_on_resume(void);
#endif /* CONFIG_PM_SLEEP */
struct acpi_osc_context {
diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h
index 9101ed6..09ea4a1 100644
--- a/include/linux/agp_backend.h
+++ b/include/linux/agp_backend.h
@@ -79,7 +79,6 @@
u32 physical;
bool is_bound;
bool is_flushed;
- bool vmalloc_flag;
/* list of agp_memory mapped to the aperture */
struct list_head mapped_list;
/* DMA-mapped addresses */
diff --git a/include/linux/aio.h b/include/linux/aio.h
index 811dbb3..7a8db41 100644
--- a/include/linux/aio.h
+++ b/include/linux/aio.h
@@ -212,6 +212,8 @@
extern int aio_complete(struct kiocb *iocb, long res, long res2);
struct mm_struct;
extern void exit_aio(struct mm_struct *mm);
+extern long do_io_submit(aio_context_t ctx_id, long nr,
+ struct iocb __user *__user *iocbpp, bool compat);
#else
static inline ssize_t wait_on_sync_kiocb(struct kiocb *iocb) { return 0; }
static inline int aio_put_req(struct kiocb *iocb) { return 0; }
@@ -219,6 +221,9 @@
static inline int aio_complete(struct kiocb *iocb, long res, long res2) { return 0; }
struct mm_struct;
static inline void exit_aio(struct mm_struct *mm) { }
+static inline long do_io_submit(aio_context_t ctx_id, long nr,
+ struct iocb __user * __user *iocbpp,
+ bool compat) { return 0; }
#endif /* CONFIG_AIO */
static inline struct kiocb *list_kiocb(struct list_head *h)
diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h
new file mode 100644
index 0000000..cbee7de
--- /dev/null
+++ b/include/linux/amba/pl330.h
@@ -0,0 +1,45 @@
+/* linux/include/linux/amba/pl330.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __AMBA_PL330_H_
+#define __AMBA_PL330_H_
+
+#include <asm/hardware/pl330.h>
+
+struct dma_pl330_peri {
+ /*
+ * Peri_Req i/f of the DMAC that is
+ * peripheral could be reached from.
+ */
+ u8 peri_id; /* {0, 31} */
+ enum pl330_reqtype rqtype;
+
+ /* For M->D and D->M Channels */
+ int burst_sz; /* in power of 2 */
+ dma_addr_t fifo_addr;
+};
+
+struct dma_pl330_platdata {
+ /*
+ * Number of valid peripherals connected to DMAC.
+ * This may be different from the value read from
+ * CR0, as the PL330 implementation might have 'holes'
+ * in the peri list or the peri could also be reached
+ * from another DMAC which the platform prefers.
+ */
+ u8 nr_valid_peri;
+ /* Array of valid peripherals */
+ struct dma_pl330_peri *peri;
+ /* Bytes to allocate for MC buffer */
+ unsigned mcbuf_sz;
+};
+
+#endif /* __AMBA_PL330_H_ */
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index e6e0cb5..e9aec0d 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -82,8 +82,6 @@
struct bdi_writeback wb; /* default writeback info for this bdi */
spinlock_t wb_lock; /* protects update side of wb_list */
struct list_head wb_list; /* the flusher threads hanging off this bdi */
- unsigned long wb_mask; /* bitmask of registered tasks */
- unsigned int wb_cnt; /* number of registered tasks */
struct list_head work_list;
@@ -105,8 +103,8 @@
int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
void bdi_unregister(struct backing_dev_info *bdi);
int bdi_setup_and_register(struct backing_dev_info *, char *, unsigned int);
-void bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb,
- long nr_pages, int sb_locked);
+void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages);
+void bdi_start_background_writeback(struct backing_dev_info *bdi);
int bdi_writeback_task(struct bdi_writeback *wb);
int bdi_has_dirty_io(struct backing_dev_info *bdi);
void bdi_arm_supers_timer(void);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 8b7f5e09..09a8402 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1211,14 +1211,23 @@
int kblockd_schedule_work(struct request_queue *q, struct work_struct *work);
#ifdef CONFIG_BLK_CGROUP
+/*
+ * This should not be using sched_clock(). A real patch is in progress
+ * to fix this up, until that is in place we need to disable preemption
+ * around sched_clock() in this function and set_io_start_time_ns().
+ */
static inline void set_start_time_ns(struct request *req)
{
+ preempt_disable();
req->start_time_ns = sched_clock();
+ preempt_enable();
}
static inline void set_io_start_time_ns(struct request *req)
{
+ preempt_disable();
req->io_start_time_ns = sched_clock();
+ preempt_enable();
}
static inline uint64_t rq_start_time_ns(struct request *req)
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
index 16ed028..1b9ba19 100644
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -203,6 +203,9 @@
int block_read_full_page(struct page*, get_block_t*);
int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
unsigned long from);
+int block_write_begin_newtrunc(struct file *, struct address_space *,
+ loff_t, unsigned, unsigned,
+ struct page **, void **, get_block_t*);
int block_write_begin(struct file *, struct address_space *,
loff_t, unsigned, unsigned,
struct page **, void **, get_block_t*);
@@ -214,6 +217,9 @@
struct page *, void *);
void page_zero_new_buffers(struct page *page, unsigned from, unsigned to);
int block_prepare_write(struct page*, unsigned, unsigned, get_block_t*);
+int cont_write_begin_newtrunc(struct file *, struct address_space *, loff_t,
+ unsigned, unsigned, struct page **, void **,
+ get_block_t *, loff_t *);
int cont_write_begin(struct file *, struct address_space *, loff_t,
unsigned, unsigned, struct page **, void **,
get_block_t *, loff_t *);
@@ -224,7 +230,10 @@
void block_sync_page(struct page *);
sector_t generic_block_bmap(struct address_space *, sector_t, get_block_t *);
int block_truncate_page(struct address_space *, loff_t, get_block_t *);
-int file_fsync(struct file *, struct dentry *, int);
+int file_fsync(struct file *, int);
+int nobh_write_begin_newtrunc(struct file *, struct address_space *,
+ loff_t, unsigned, unsigned,
+ struct page **, void **, get_block_t*);
int nobh_write_begin(struct file *, struct address_space *,
loff_t, unsigned, unsigned,
struct page **, void **, get_block_t*);
diff --git a/include/linux/byteorder/big_endian.h b/include/linux/byteorder/big_endian.h
index d53a67d..3c80fd7 100644
--- a/include/linux/byteorder/big_endian.h
+++ b/include/linux/byteorder/big_endian.h
@@ -7,9 +7,6 @@
#ifndef __BIG_ENDIAN_BITFIELD
#define __BIG_ENDIAN_BITFIELD
#endif
-#ifndef __BYTE_ORDER
-#define __BYTE_ORDER __BIG_ENDIAN
-#endif
#include <linux/types.h>
#include <linux/swab.h>
diff --git a/include/linux/byteorder/little_endian.h b/include/linux/byteorder/little_endian.h
index f7f8ad1..83195fb 100644
--- a/include/linux/byteorder/little_endian.h
+++ b/include/linux/byteorder/little_endian.h
@@ -7,9 +7,6 @@
#ifndef __LITTLE_ENDIAN_BITFIELD
#define __LITTLE_ENDIAN_BITFIELD
#endif
-#ifndef __BYTE_ORDER
-#define __BYTE_ORDER __LITTLE_ENDIAN
-#endif
#include <linux/types.h>
#include <linux/swab.h>
diff --git a/include/linux/cache.h b/include/linux/cache.h
index 97e2488..4c57065 100644
--- a/include/linux/cache.h
+++ b/include/linux/cache.h
@@ -31,7 +31,7 @@
#ifndef __cacheline_aligned
#define __cacheline_aligned \
__attribute__((__aligned__(SMP_CACHE_BYTES), \
- __section__(".data.cacheline_aligned")))
+ __section__(".data..cacheline_aligned")))
#endif /* __cacheline_aligned */
#ifndef __cacheline_aligned_in_smp
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index 8f78073..e3d00fd 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -397,7 +397,7 @@
* This callback must be implemented, if you want provide
* notification functionality.
*/
- int (*unregister_event)(struct cgroup *cgrp, struct cftype *cft,
+ void (*unregister_event)(struct cgroup *cgrp, struct cftype *cft,
struct eventfd_ctx *eventfd);
};
@@ -525,13 +525,21 @@
return cgrp->subsys[subsys_id];
}
-static inline struct cgroup_subsys_state *task_subsys_state(
- struct task_struct *task, int subsys_id)
+/*
+ * function to get the cgroup_subsys_state which allows for extra
+ * rcu_dereference_check() conditions, such as locks used during the
+ * cgroup_subsys::attach() methods.
+ */
+#define task_subsys_state_check(task, subsys_id, __c) \
+ rcu_dereference_check(task->cgroups->subsys[subsys_id], \
+ rcu_read_lock_held() || \
+ lockdep_is_held(&task->alloc_lock) || \
+ cgroup_lock_is_held() || (__c))
+
+static inline struct cgroup_subsys_state *
+task_subsys_state(struct task_struct *task, int subsys_id)
{
- return rcu_dereference_check(task->cgroups->subsys[subsys_id],
- rcu_read_lock_held() ||
- lockdep_is_held(&task->alloc_lock) ||
- cgroup_lock_is_held());
+ return task_subsys_state_check(task, subsys_id, false);
}
static inline struct cgroup* task_cgroup(struct task_struct *task,
diff --git a/include/linux/compat.h b/include/linux/compat.h
index 717c691..168f7da 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -356,5 +356,9 @@
asmlinkage long compat_sys_openat(unsigned int dfd, const char __user *filename,
int flags, int mode);
+extern ssize_t compat_rw_copy_check_uvector(int type,
+ const struct compat_iovec __user *uvector, unsigned long nr_segs,
+ unsigned long fast_segs, struct iovec *fast_pointer,
+ struct iovec **ret_pointer);
#endif /* CONFIG_COMPAT */
#endif /* _LINUX_COMPAT_H */
diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
index 73dcf80..0da5b18 100644
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -58,8 +58,12 @@
* naked functions because then mcount is called without stack and frame pointer
* being set up and there is no chance to restore the lr register to the value
* before mcount was called.
+ *
+ * The asm() bodies of naked functions often depend on standard calling conventions,
+ * therefore they must be noinline and noclone. GCC 4.[56] currently fail to enforce
+ * this, so we must do so ourselves. See GCC PR44290.
*/
-#define __naked __attribute__((naked)) notrace
+#define __naked __attribute__((naked)) noinline __noclone notrace
#define __noreturn __attribute__((noreturn))
@@ -85,3 +89,7 @@
#define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h)
#define gcc_header(x) _gcc_header(x)
#include gcc_header(__GNUC__)
+
+#if !defined(__noclone)
+#define __noclone /* not needed */
+#endif
diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h
index 94dea3f..fcfa5b9 100644
--- a/include/linux/compiler-gcc4.h
+++ b/include/linux/compiler-gcc4.h
@@ -48,6 +48,10 @@
* unreleased. Really, we need to have autoconf for the kernel.
*/
#define unreachable() __builtin_unreachable()
+
+/* Mark a function definition as prohibited from being cloned. */
+#define __noclone __attribute__((__noclone__))
+
#endif
#endif
diff --git a/include/linux/completion.h b/include/linux/completion.h
index 4a6b604..51e3145 100644
--- a/include/linux/completion.h
+++ b/include/linux/completion.h
@@ -83,6 +83,8 @@
unsigned long timeout);
extern unsigned long wait_for_completion_interruptible_timeout(
struct completion *x, unsigned long timeout);
+extern unsigned long wait_for_completion_killable_timeout(
+ struct completion *x, unsigned long timeout);
extern bool try_wait_for_completion(struct completion *x);
extern bool completion_done(struct completion *x);
diff --git a/include/linux/cper.h b/include/linux/cper.h
new file mode 100644
index 0000000..4b38f90
--- /dev/null
+++ b/include/linux/cper.h
@@ -0,0 +1,314 @@
+/*
+ * UEFI Common Platform Error Record
+ *
+ * Copyright (C) 2010, Intel Corp.
+ * Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef LINUX_CPER_H
+#define LINUX_CPER_H
+
+#include <linux/uuid.h>
+
+/* CPER record signature and the size */
+#define CPER_SIG_RECORD "CPER"
+#define CPER_SIG_SIZE 4
+/* Used in signature_end field in struct cper_record_header */
+#define CPER_SIG_END 0xffffffff
+
+/*
+ * CPER record header revision, used in revision field in struct
+ * cper_record_header
+ */
+#define CPER_RECORD_REV 0x0100
+
+/*
+ * Severity difinition for error_severity in struct cper_record_header
+ * and section_severity in struct cper_section_descriptor
+ */
+#define CPER_SER_RECOVERABLE 0x0
+#define CPER_SER_FATAL 0x1
+#define CPER_SER_CORRECTED 0x2
+#define CPER_SER_INFORMATIONAL 0x3
+
+/*
+ * Validation bits difinition for validation_bits in struct
+ * cper_record_header. If set, corresponding fields in struct
+ * cper_record_header contain valid information.
+ *
+ * corresponds platform_id
+ */
+#define CPER_VALID_PLATFORM_ID 0x0001
+/* corresponds timestamp */
+#define CPER_VALID_TIMESTAMP 0x0002
+/* corresponds partition_id */
+#define CPER_VALID_PARTITION_ID 0x0004
+
+/*
+ * Notification type used to generate error record, used in
+ * notification_type in struct cper_record_header
+ *
+ * Corrected Machine Check
+ */
+#define CPER_NOTIFY_CMC \
+ UUID_LE(0x2DCE8BB1, 0xBDD7, 0x450e, 0xB9, 0xAD, 0x9C, 0xF4, \
+ 0xEB, 0xD4, 0xF8, 0x90)
+/* Corrected Platform Error */
+#define CPER_NOTIFY_CPE \
+ UUID_LE(0x4E292F96, 0xD843, 0x4a55, 0xA8, 0xC2, 0xD4, 0x81, \
+ 0xF2, 0x7E, 0xBE, 0xEE)
+/* Machine Check Exception */
+#define CPER_NOTIFY_MCE \
+ UUID_LE(0xE8F56FFE, 0x919C, 0x4cc5, 0xBA, 0x88, 0x65, 0xAB, \
+ 0xE1, 0x49, 0x13, 0xBB)
+/* PCI Express Error */
+#define CPER_NOTIFY_PCIE \
+ UUID_LE(0xCF93C01F, 0x1A16, 0x4dfc, 0xB8, 0xBC, 0x9C, 0x4D, \
+ 0xAF, 0x67, 0xC1, 0x04)
+/* INIT Record (for IPF) */
+#define CPER_NOTIFY_INIT \
+ UUID_LE(0xCC5263E8, 0x9308, 0x454a, 0x89, 0xD0, 0x34, 0x0B, \
+ 0xD3, 0x9B, 0xC9, 0x8E)
+/* Non-Maskable Interrupt */
+#define CPER_NOTIFY_NMI \
+ UUID_LE(0x5BAD89FF, 0xB7E6, 0x42c9, 0x81, 0x4A, 0xCF, 0x24, \
+ 0x85, 0xD6, 0xE9, 0x8A)
+/* BOOT Error Record */
+#define CPER_NOTIFY_BOOT \
+ UUID_LE(0x3D61A466, 0xAB40, 0x409a, 0xA6, 0x98, 0xF3, 0x62, \
+ 0xD4, 0x64, 0xB3, 0x8F)
+/* DMA Remapping Error */
+#define CPER_NOTIFY_DMAR \
+ UUID_LE(0x667DD791, 0xC6B3, 0x4c27, 0x8A, 0x6B, 0x0F, 0x8E, \
+ 0x72, 0x2D, 0xEB, 0x41)
+
+/*
+ * Flags bits definitions for flags in struct cper_record_header
+ * If set, the error has been recovered
+ */
+#define CPER_HW_ERROR_FLAGS_RECOVERED 0x1
+/* If set, the error is for previous boot */
+#define CPER_HW_ERROR_FLAGS_PREVERR 0x2
+/* If set, the error is injected for testing */
+#define CPER_HW_ERROR_FLAGS_SIMULATED 0x4
+
+/*
+ * CPER section header revision, used in revision field in struct
+ * cper_section_descriptor
+ */
+#define CPER_SEC_REV 0x0100
+
+/*
+ * Validation bits difinition for validation_bits in struct
+ * cper_section_descriptor. If set, corresponding fields in struct
+ * cper_section_descriptor contain valid information.
+ *
+ * corresponds fru_id
+ */
+#define CPER_SEC_VALID_FRU_ID 0x1
+/* corresponds fru_text */
+#define CPER_SEC_VALID_FRU_TEXT 0x2
+
+/*
+ * Flags bits definitions for flags in struct cper_section_descriptor
+ *
+ * If set, the section is associated with the error condition
+ * directly, and should be focused on
+ */
+#define CPER_SEC_PRIMARY 0x0001
+/*
+ * If set, the error was not contained within the processor or memory
+ * hierarchy and the error may have propagated to persistent storage
+ * or network
+ */
+#define CPER_SEC_CONTAINMENT_WARNING 0x0002
+/* If set, the component must be re-initialized or re-enabled prior to use */
+#define CPER_SEC_RESET 0x0004
+/* If set, Linux may choose to discontinue use of the resource */
+#define CPER_SEC_ERROR_THRESHOLD_EXCEEDED 0x0008
+/*
+ * If set, resource could not be queried for error information due to
+ * conflicts with other system software or resources. Some fields of
+ * the section will be invalid
+ */
+#define CPER_SEC_RESOURCE_NOT_ACCESSIBLE 0x0010
+/*
+ * If set, action has been taken to ensure error containment (such as
+ * poisoning data), but the error has not been fully corrected and the
+ * data has not been consumed. Linux may choose to take further
+ * corrective action before the data is consumed
+ */
+#define CPER_SEC_LATENT_ERROR 0x0020
+
+/*
+ * Section type definitions, used in section_type field in struct
+ * cper_section_descriptor
+ *
+ * Processor Generic
+ */
+#define CPER_SEC_PROC_GENERIC \
+ UUID_LE(0x9876CCAD, 0x47B4, 0x4bdb, 0xB6, 0x5E, 0x16, 0xF1, \
+ 0x93, 0xC4, 0xF3, 0xDB)
+/* Processor Specific: X86/X86_64 */
+#define CPER_SEC_PROC_IA \
+ UUID_LE(0xDC3EA0B0, 0xA144, 0x4797, 0xB9, 0x5B, 0x53, 0xFA, \
+ 0x24, 0x2B, 0x6E, 0x1D)
+/* Processor Specific: IA64 */
+#define CPER_SEC_PROC_IPF \
+ UUID_LE(0xE429FAF1, 0x3CB7, 0x11D4, 0x0B, 0xCA, 0x07, 0x00, \
+ 0x80, 0xC7, 0x3C, 0x88, 0x81)
+/* Platform Memory */
+#define CPER_SEC_PLATFORM_MEM \
+ UUID_LE(0xA5BC1114, 0x6F64, 0x4EDE, 0xB8, 0x63, 0x3E, 0x83, \
+ 0xED, 0x7C, 0x83, 0xB1)
+#define CPER_SEC_PCIE \
+ UUID_LE(0xD995E954, 0xBBC1, 0x430F, 0xAD, 0x91, 0xB4, 0x4D, \
+ 0xCB, 0x3C, 0x6F, 0x35)
+/* Firmware Error Record Reference */
+#define CPER_SEC_FW_ERR_REC_REF \
+ UUID_LE(0x81212A96, 0x09ED, 0x4996, 0x94, 0x71, 0x8D, 0x72, \
+ 0x9C, 0x8E, 0x69, 0xED)
+/* PCI/PCI-X Bus */
+#define CPER_SEC_PCI_X_BUS \
+ UUID_LE(0xC5753963, 0x3B84, 0x4095, 0xBF, 0x78, 0xED, 0xDA, \
+ 0xD3, 0xF9, 0xC9, 0xDD)
+/* PCI Component/Device */
+#define CPER_SEC_PCI_DEV \
+ UUID_LE(0xEB5E4685, 0xCA66, 0x4769, 0xB6, 0xA2, 0x26, 0x06, \
+ 0x8B, 0x00, 0x13, 0x26)
+#define CPER_SEC_DMAR_GENERIC \
+ UUID_LE(0x5B51FEF7, 0xC79D, 0x4434, 0x8F, 0x1B, 0xAA, 0x62, \
+ 0xDE, 0x3E, 0x2C, 0x64)
+/* Intel VT for Directed I/O specific DMAr */
+#define CPER_SEC_DMAR_VT \
+ UUID_LE(0x71761D37, 0x32B2, 0x45cd, 0xA7, 0xD0, 0xB0, 0xFE, \
+ 0xDD, 0x93, 0xE8, 0xCF)
+/* IOMMU specific DMAr */
+#define CPER_SEC_DMAR_IOMMU \
+ UUID_LE(0x036F84E1, 0x7F37, 0x428c, 0xA7, 0x9E, 0x57, 0x5F, \
+ 0xDF, 0xAA, 0x84, 0xEC)
+
+/*
+ * All tables and structs must be byte-packed to match CPER
+ * specification, since the tables are provided by the system BIOS
+ */
+#pragma pack(1)
+
+struct cper_record_header {
+ char signature[CPER_SIG_SIZE]; /* must be CPER_SIG_RECORD */
+ __u16 revision; /* must be CPER_RECORD_REV */
+ __u32 signature_end; /* must be CPER_SIG_END */
+ __u16 section_count;
+ __u32 error_severity;
+ __u32 validation_bits;
+ __u32 record_length;
+ __u64 timestamp;
+ uuid_le platform_id;
+ uuid_le partition_id;
+ uuid_le creator_id;
+ uuid_le notification_type;
+ __u64 record_id;
+ __u32 flags;
+ __u64 persistence_information;
+ __u8 reserved[12]; /* must be zero */
+};
+
+struct cper_section_descriptor {
+ __u32 section_offset; /* Offset in bytes of the
+ * section body from the base
+ * of the record header */
+ __u32 section_length;
+ __u16 revision; /* must be CPER_RECORD_REV */
+ __u8 validation_bits;
+ __u8 reserved; /* must be zero */
+ __u32 flags;
+ uuid_le section_type;
+ uuid_le fru_id;
+ __u32 section_severity;
+ __u8 fru_text[20];
+};
+
+/* Generic Processor Error Section */
+struct cper_sec_proc_generic {
+ __u64 validation_bits;
+ __u8 proc_type;
+ __u8 proc_isa;
+ __u8 proc_error_type;
+ __u8 operation;
+ __u8 flags;
+ __u8 level;
+ __u16 reserved;
+ __u64 cpu_version;
+ char cpu_brand[128];
+ __u64 proc_id;
+ __u64 target_addr;
+ __u64 requestor_id;
+ __u64 responder_id;
+ __u64 ip;
+};
+
+/* IA32/X64 Processor Error Section */
+struct cper_sec_proc_ia {
+ __u64 validation_bits;
+ __u8 lapic_id;
+ __u8 cpuid[48];
+};
+
+/* IA32/X64 Processor Error Infomation Structure */
+struct cper_ia_err_info {
+ uuid_le err_type;
+ __u64 validation_bits;
+ __u64 check_info;
+ __u64 target_id;
+ __u64 requestor_id;
+ __u64 responder_id;
+ __u64 ip;
+};
+
+/* IA32/X64 Processor Context Information Structure */
+struct cper_ia_proc_ctx {
+ __u16 reg_ctx_type;
+ __u16 reg_arr_size;
+ __u32 msr_addr;
+ __u64 mm_reg_addr;
+};
+
+/* Memory Error Section */
+struct cper_sec_mem_err {
+ __u64 validation_bits;
+ __u64 error_status;
+ __u64 physical_addr;
+ __u64 physical_addr_mask;
+ __u16 node;
+ __u16 card;
+ __u16 module;
+ __u16 bank;
+ __u16 device;
+ __u16 row;
+ __u16 column;
+ __u16 bit_pos;
+ __u64 requestor_id;
+ __u64 responder_id;
+ __u64 target_id;
+ __u8 error_type;
+};
+
+/* Reset to default packing */
+#pragma pack()
+
+u64 cper_next_record_id(void);
+
+#endif
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index dcf77fa..55215cc 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -125,6 +125,7 @@
#ifdef CONFIG_CPU_IDLE
extern int cpuidle_register_driver(struct cpuidle_driver *drv);
+struct cpuidle_driver *cpuidle_get_driver(void);
extern void cpuidle_unregister_driver(struct cpuidle_driver *drv);
extern int cpuidle_register_device(struct cpuidle_device *dev);
extern void cpuidle_unregister_device(struct cpuidle_device *dev);
@@ -137,16 +138,17 @@
#else
static inline int cpuidle_register_driver(struct cpuidle_driver *drv)
-{return 0;}
+{return -ENODEV; }
+static inline struct cpuidle_driver *cpuidle_get_driver(void) {return NULL; }
static inline void cpuidle_unregister_driver(struct cpuidle_driver *drv) { }
static inline int cpuidle_register_device(struct cpuidle_device *dev)
-{return 0;}
+{return -ENODEV; }
static inline void cpuidle_unregister_device(struct cpuidle_device *dev) { }
static inline void cpuidle_pause_and_lock(void) { }
static inline void cpuidle_resume_and_unlock(void) { }
static inline int cpuidle_enable_device(struct cpuidle_device *dev)
-{return 0;}
+{return -ENODEV; }
static inline void cpuidle_disable_device(struct cpuidle_device *dev) { }
#endif
diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h
index 20b51ca..457ed76 100644
--- a/include/linux/cpuset.h
+++ b/include/linux/cpuset.h
@@ -69,6 +69,7 @@
struct task_struct *task);
extern int cpuset_mem_spread_node(void);
+extern int cpuset_slab_spread_node(void);
static inline int cpuset_do_page_mem_spread(void)
{
@@ -194,6 +195,11 @@
return 0;
}
+static inline int cpuset_slab_spread_node(void)
+{
+ return 0;
+}
+
static inline int cpuset_do_page_mem_spread(void)
{
return 0;
diff --git a/include/linux/cred.h b/include/linux/cred.h
index 52507c3..75c0fa8 100644
--- a/include/linux/cred.h
+++ b/include/linux/cred.h
@@ -156,7 +156,6 @@
extern struct cred *cred_alloc_blank(void);
extern struct cred *prepare_creds(void);
extern struct cred *prepare_exec_creds(void);
-extern struct cred *prepare_usermodehelper_creds(void);
extern int commit_creds(struct cred *);
extern void abort_creds(struct cred *);
extern const struct cred *override_creds(const struct cred *);
diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h
index fc1b930..e7d9b20 100644
--- a/include/linux/debugfs.h
+++ b/include/linux/debugfs.h
@@ -63,6 +63,8 @@
struct dentry *parent, u16 *value);
struct dentry *debugfs_create_x32(const char *name, mode_t mode,
struct dentry *parent, u32 *value);
+struct dentry *debugfs_create_x64(const char *name, mode_t mode,
+ struct dentry *parent, u64 *value);
struct dentry *debugfs_create_size_t(const char *name, mode_t mode,
struct dentry *parent, size_t *value);
struct dentry *debugfs_create_bool(const char *name, mode_t mode,
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index ca32ed7..89b7e1a 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -40,16 +40,6 @@
void (*sync_single_for_device)(struct device *dev,
dma_addr_t dma_handle, size_t size,
enum dma_data_direction dir);
- void (*sync_single_range_for_cpu)(struct device *dev,
- dma_addr_t dma_handle,
- unsigned long offset,
- size_t size,
- enum dma_data_direction dir);
- void (*sync_single_range_for_device)(struct device *dev,
- dma_addr_t dma_handle,
- unsigned long offset,
- size_t size,
- enum dma_data_direction dir);
void (*sync_sg_for_cpu)(struct device *dev,
struct scatterlist *sg, int nents,
enum dma_data_direction dir);
@@ -105,21 +95,6 @@
#include <asm-generic/dma-mapping-broken.h>
#endif
-/* for backwards compatibility, removed soon */
-static inline void __deprecated dma_sync_single(struct device *dev,
- dma_addr_t addr, size_t size,
- enum dma_data_direction dir)
-{
- dma_sync_single_for_cpu(dev, addr, size, dir);
-}
-
-static inline void __deprecated dma_sync_sg(struct device *dev,
- struct scatterlist *sg, int nelems,
- enum dma_data_direction dir)
-{
- dma_sync_sg_for_cpu(dev, sg, nelems, dir);
-}
-
static inline u64 dma_get_mask(struct device *dev)
{
if (dev && dev->dma_mask && *dev->dma_mask)
diff --git a/include/linux/drbd.h b/include/linux/drbd.h
index 6853052..b8d2516 100644
--- a/include/linux/drbd.h
+++ b/include/linux/drbd.h
@@ -53,7 +53,7 @@
extern const char *drbd_buildtag(void);
-#define REL_VERSION "8.3.8rc1"
+#define REL_VERSION "8.3.8"
#define API_VERSION 88
#define PRO_VERSION_MIN 86
#define PRO_VERSION_MAX 94
diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h
index b3cd4de..52c0da4 100644
--- a/include/linux/dynamic_debug.h
+++ b/include/linux/dynamic_debug.h
@@ -40,7 +40,7 @@
const char *modname);
#if defined(CONFIG_DYNAMIC_DEBUG)
-extern int ddebug_remove_module(char *mod_name);
+extern int ddebug_remove_module(const char *mod_name);
#define __dynamic_dbg_enabled(dd) ({ \
int __ret = 0; \
@@ -73,7 +73,7 @@
#else
-static inline int ddebug_remove_module(char *mod)
+static inline int ddebug_remove_module(const char *mod)
{
return 0;
}
diff --git a/include/linux/edac_mce.h b/include/linux/edac_mce.h
new file mode 100644
index 0000000..f974fc0
--- /dev/null
+++ b/include/linux/edac_mce.h
@@ -0,0 +1,31 @@
+/* Provides edac interface to mcelog events
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2.
+ *
+ * Copyright (c) 2009 by:
+ * Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * Red Hat Inc. http://www.redhat.com
+ */
+
+#if defined(CONFIG_EDAC_MCE) || \
+ (defined(CONFIG_EDAC_MCE_MODULE) && defined(MODULE))
+
+#include <asm/mce.h>
+#include <linux/list.h>
+
+struct edac_mce {
+ struct list_head list;
+
+ void *priv;
+ int (*check_error)(void *priv, struct mce *mce);
+};
+
+int edac_mce_register(struct edac_mce *edac_mce);
+void edac_mce_unregister(struct edac_mce *edac_mce);
+int edac_mce_parse(struct mce *mce);
+
+#else
+#define edac_mce_parse(mce) (0)
+#endif
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 276b40a..b4207ca 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -379,6 +379,8 @@
__u32 flow_type;
/* The rx flow hash value or the rule DB size */
__u64 data;
+ /* The following fields are not valid and must not be used for
+ * the ETHTOOL_{G,X}RXFH commands. */
struct ethtool_rx_flow_spec fs;
__u32 rule_cnt;
__u32 rule_locs[0];
diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h
index 5f494b4..7fc62d4 100644
--- a/include/linux/ext3_fs.h
+++ b/include/linux/ext3_fs.h
@@ -868,7 +868,7 @@
extern void ext3_htree_free_dir_info(struct dir_private_info *p);
/* fsync.c */
-extern int ext3_sync_file (struct file *, struct dentry *, int);
+extern int ext3_sync_file(struct file *, int);
/* hash.c */
extern int ext3fs_dirhash(const char *name, int len, struct
diff --git a/include/linux/fb.h b/include/linux/fb.h
index f3793eb..e7445df 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -4,8 +4,6 @@
#include <linux/types.h>
#include <linux/i2c.h>
-struct dentry;
-
/* Definitions of frame buffers */
#define FB_MAX 32 /* sufficient for now */
@@ -788,8 +786,6 @@
#define FBINFO_MISC_USEREVENT 0x10000 /* event request
from userspace */
#define FBINFO_MISC_TILEBLITTING 0x20000 /* use tile blitting */
-#define FBINFO_MISC_FIRMWARE 0x40000 /* a replaceable firmware
- inited framebuffer */
/* A driver may set this flag to indicate that it does want a set_par to be
* called every time when fbcon_switch is executed. The advantage is that with
@@ -803,6 +799,8 @@
*/
#define FBINFO_MISC_ALWAYS_SETPAR 0x40000
+/* where the fb is a firmware driver, and can be replaced with a proper one */
+#define FBINFO_MISC_FIRMWARE 0x80000
/*
* Host and GPU endianness differ.
*/
@@ -875,6 +873,8 @@
static inline struct apertures_struct *alloc_apertures(unsigned int max_num) {
struct apertures_struct *a = kzalloc(sizeof(struct apertures_struct)
+ max_num * sizeof(struct aperture), GFP_KERNEL);
+ if (!a)
+ return NULL;
a->count = max_num;
return a;
}
@@ -1017,8 +1017,7 @@
struct inode *inode,
struct file *file);
extern void fb_deferred_io_cleanup(struct fb_info *info);
-extern int fb_deferred_io_fsync(struct file *file, struct dentry *dentry,
- int datasync);
+extern int fb_deferred_io_fsync(struct file *file, int datasync);
static inline bool fb_be_math(struct fb_info *info)
{
diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h
index 013dc52..d147461 100644
--- a/include/linux/fdtable.h
+++ b/include/linux/fdtable.h
@@ -61,7 +61,8 @@
(rcu_dereference_check((fdtfd), \
rcu_read_lock_held() || \
lockdep_is_held(&(files)->file_lock) || \
- atomic_read(&(files)->count) == 1))
+ atomic_read(&(files)->count) == 1 || \
+ rcu_my_thread_group_empty()))
#define files_fdtable(files) \
(rcu_dereference_check_fdtable((files), (files)->fdt))
diff --git a/include/linux/file.h b/include/linux/file.h
index 5555508..b1e1297 100644
--- a/include/linux/file.h
+++ b/include/linux/file.h
@@ -11,7 +11,6 @@
struct file;
-extern void __fput(struct file *);
extern void fput(struct file *);
extern void drop_file_write_access(struct file *file);
diff --git a/include/linux/firewire.h b/include/linux/firewire.h
index 4bd94bf..72e2b8a 100644
--- a/include/linux/firewire.h
+++ b/include/linux/firewire.h
@@ -55,13 +55,11 @@
#define CSR_DESCRIPTOR 0x01
#define CSR_VENDOR 0x03
#define CSR_HARDWARE_VERSION 0x04
-#define CSR_NODE_CAPABILITIES 0x0c
#define CSR_UNIT 0x11
#define CSR_SPECIFIER_ID 0x12
#define CSR_VERSION 0x13
#define CSR_DEPENDENT_INFO 0x14
#define CSR_MODEL 0x17
-#define CSR_INSTANCE 0x18
#define CSR_DIRECTORY_ID 0x20
struct fw_csr_iterator {
@@ -89,7 +87,6 @@
int current_tlabel;
u64 tlabel_mask;
struct list_head transaction_list;
- struct timer_list flush_timer;
unsigned long reset_jiffies;
unsigned long long guid;
@@ -290,6 +287,8 @@
int tlabel;
int timestamp;
struct list_head link;
+ struct fw_card *card;
+ struct timer_list split_timeout_timer;
struct fw_packet packet;
diff --git a/include/linux/fs.h b/include/linux/fs.h
index b336cb9..68ca1b0 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -954,6 +954,7 @@
#define file_list_unlock() spin_unlock(&files_lock);
#define get_file(x) atomic_long_inc(&(x)->f_count)
+#define fput_atomic(x) atomic_long_add_unless(&(x)->f_count, -1, 1)
#define file_count(x) atomic_long_read(&(x)->f_count)
#ifdef CONFIG_DEBUG_WRITECOUNT
@@ -1497,7 +1498,7 @@
int (*open) (struct inode *, struct file *);
int (*flush) (struct file *, fl_owner_t id);
int (*release) (struct inode *, struct file *);
- int (*fsync) (struct file *, struct dentry *, int datasync);
+ int (*fsync) (struct file *, int datasync);
int (*aio_fsync) (struct kiocb *, int datasync);
int (*fasync) (int, struct file *, int);
int (*lock) (struct file *, int, struct file_lock *);
@@ -1782,6 +1783,19 @@
struct vfsmount *mnt);
extern void simple_set_mnt(struct vfsmount *mnt, struct super_block *sb);
+static inline void sb_mark_dirty(struct super_block *sb)
+{
+ sb->s_dirt = 1;
+}
+static inline void sb_mark_clean(struct super_block *sb)
+{
+ sb->s_dirt = 0;
+}
+static inline int sb_is_dirty(struct super_block *sb)
+{
+ return sb->s_dirt;
+}
+
/* Alas, no aliases. Too much hassle with bringing module.h everywhere */
#define fops_get(fops) \
(((fops) && try_module_get((fops)->owner) ? (fops) : NULL))
@@ -2212,7 +2226,7 @@
/* fs/block_dev.c */
extern ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos);
-extern int blkdev_fsync(struct file *filp, struct dentry *dentry, int datasync);
+extern int blkdev_fsync(struct file *filp, int datasync);
/* fs/splice.c */
extern ssize_t generic_file_splice_read(struct file *, loff_t *,
@@ -2228,6 +2242,7 @@
extern void
file_ra_state_init(struct file_ra_state *ra, struct address_space *mapping);
+extern loff_t noop_llseek(struct file *file, loff_t offset, int origin);
extern loff_t no_llseek(struct file *file, loff_t offset, int origin);
extern loff_t generic_file_llseek(struct file *file, loff_t offset, int origin);
extern loff_t generic_file_llseek_unlocked(struct file *file, loff_t offset,
@@ -2250,10 +2265,19 @@
#endif
#ifdef CONFIG_BLOCK
+struct bio;
+typedef void (dio_submit_t)(int rw, struct bio *bio, struct inode *inode,
+ loff_t file_offset);
+void dio_end_io(struct bio *bio, int error);
+
+ssize_t __blockdev_direct_IO_newtrunc(int rw, struct kiocb *iocb, struct inode *inode,
+ struct block_device *bdev, const struct iovec *iov, loff_t offset,
+ unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
+ dio_submit_t submit_io, int lock_type);
ssize_t __blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
struct block_device *bdev, const struct iovec *iov, loff_t offset,
unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
- int lock_type);
+ dio_submit_t submit_io, int lock_type);
enum {
/* need locking between buffered and direct access */
@@ -2263,13 +2287,31 @@
DIO_SKIP_HOLES = 0x02,
};
+static inline ssize_t blockdev_direct_IO_newtrunc(int rw, struct kiocb *iocb,
+ struct inode *inode, struct block_device *bdev, const struct iovec *iov,
+ loff_t offset, unsigned long nr_segs, get_block_t get_block,
+ dio_iodone_t end_io)
+{
+ return __blockdev_direct_IO_newtrunc(rw, iocb, inode, bdev, iov, offset,
+ nr_segs, get_block, end_io, NULL,
+ DIO_LOCKING | DIO_SKIP_HOLES);
+}
+
+static inline ssize_t blockdev_direct_IO_no_locking_newtrunc(int rw, struct kiocb *iocb,
+ struct inode *inode, struct block_device *bdev, const struct iovec *iov,
+ loff_t offset, unsigned long nr_segs, get_block_t get_block,
+ dio_iodone_t end_io)
+{
+ return __blockdev_direct_IO_newtrunc(rw, iocb, inode, bdev, iov, offset,
+ nr_segs, get_block, end_io, NULL, 0);
+}
static inline ssize_t blockdev_direct_IO(int rw, struct kiocb *iocb,
struct inode *inode, struct block_device *bdev, const struct iovec *iov,
loff_t offset, unsigned long nr_segs, get_block_t get_block,
dio_iodone_t end_io)
{
return __blockdev_direct_IO(rw, iocb, inode, bdev, iov, offset,
- nr_segs, get_block, end_io,
+ nr_segs, get_block, end_io, NULL,
DIO_LOCKING | DIO_SKIP_HOLES);
}
@@ -2279,7 +2321,7 @@
dio_iodone_t end_io)
{
return __blockdev_direct_IO(rw, iocb, inode, bdev, iov, offset,
- nr_segs, get_block, end_io, 0);
+ nr_segs, get_block, end_io, NULL, 0);
}
#endif
@@ -2335,13 +2377,15 @@
extern int dcache_dir_close(struct inode *, struct file *);
extern loff_t dcache_dir_lseek(struct file *, loff_t, int);
extern int dcache_readdir(struct file *, void *, filldir_t);
+extern int simple_setattr(struct dentry *, struct iattr *);
extern int simple_getattr(struct vfsmount *, struct dentry *, struct kstat *);
extern int simple_statfs(struct dentry *, struct kstatfs *);
extern int simple_link(struct dentry *, struct inode *, struct dentry *);
extern int simple_unlink(struct inode *, struct dentry *);
extern int simple_rmdir(struct inode *, struct dentry *);
extern int simple_rename(struct inode *, struct dentry *, struct inode *, struct dentry *);
-extern int simple_sync_file(struct file *, struct dentry *, int);
+extern int simple_setsize(struct inode *, loff_t);
+extern int noop_fsync(struct file *, int);
extern int simple_empty(struct dentry *);
extern int simple_readpage(struct file *file, struct page *page);
extern int simple_write_begin(struct file *file, struct address_space *mapping,
@@ -2357,7 +2401,7 @@
extern const struct inode_operations simple_dir_inode_operations;
struct tree_descr { char *name; const struct file_operations *ops; int mode; };
struct dentry *d_alloc_name(struct dentry *, const char *);
-extern int simple_fill_super(struct super_block *, int, struct tree_descr *);
+extern int simple_fill_super(struct super_block *, unsigned long, struct tree_descr *);
extern int simple_pin_fs(struct file_system_type *, struct vfsmount **mount, int *count);
extern void simple_release_fs(struct vfsmount **mount, int *count);
@@ -2366,7 +2410,7 @@
extern ssize_t simple_write_to_buffer(void *to, size_t available, loff_t *ppos,
const void __user *from, size_t count);
-extern int simple_fsync(struct file *, struct dentry *, int);
+extern int generic_file_fsync(struct file *, int);
#ifdef CONFIG_MIGRATION
extern int buffer_migrate_page(struct address_space *,
@@ -2377,7 +2421,8 @@
extern int inode_change_ok(const struct inode *, struct iattr *);
extern int inode_newsize_ok(const struct inode *, loff_t offset);
-extern int __must_check inode_setattr(struct inode *, struct iattr *);
+extern int __must_check inode_setattr(struct inode *, const struct iattr *);
+extern void generic_setattr(struct inode *inode, const struct iattr *attr);
extern void file_update_time(struct file *file);
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
index c082f22..3167f2d 100644
--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -73,18 +73,25 @@
};
+struct trace_event;
+
typedef enum print_line_t (*trace_print_func)(struct trace_iterator *iter,
- int flags);
-struct trace_event {
- struct hlist_node node;
- struct list_head list;
- int type;
+ int flags, struct trace_event *event);
+
+struct trace_event_functions {
trace_print_func trace;
trace_print_func raw;
trace_print_func hex;
trace_print_func binary;
};
+struct trace_event {
+ struct hlist_node node;
+ struct list_head list;
+ int type;
+ struct trace_event_functions *funcs;
+};
+
extern int register_ftrace_event(struct trace_event *event);
extern int unregister_ftrace_event(struct trace_event *event);
@@ -116,28 +123,70 @@
struct event_filter;
+enum trace_reg {
+ TRACE_REG_REGISTER,
+ TRACE_REG_UNREGISTER,
+ TRACE_REG_PERF_REGISTER,
+ TRACE_REG_PERF_UNREGISTER,
+};
+
+struct ftrace_event_call;
+
+struct ftrace_event_class {
+ char *system;
+ void *probe;
+#ifdef CONFIG_PERF_EVENTS
+ void *perf_probe;
+#endif
+ int (*reg)(struct ftrace_event_call *event,
+ enum trace_reg type);
+ int (*define_fields)(struct ftrace_event_call *);
+ struct list_head *(*get_fields)(struct ftrace_event_call *);
+ struct list_head fields;
+ int (*raw_init)(struct ftrace_event_call *);
+};
+
+enum {
+ TRACE_EVENT_FL_ENABLED_BIT,
+ TRACE_EVENT_FL_FILTERED_BIT,
+};
+
+enum {
+ TRACE_EVENT_FL_ENABLED = (1 << TRACE_EVENT_FL_ENABLED_BIT),
+ TRACE_EVENT_FL_FILTERED = (1 << TRACE_EVENT_FL_FILTERED_BIT),
+};
+
struct ftrace_event_call {
struct list_head list;
+ struct ftrace_event_class *class;
char *name;
- char *system;
struct dentry *dir;
- struct trace_event *event;
- int enabled;
- int (*regfunc)(struct ftrace_event_call *);
- void (*unregfunc)(struct ftrace_event_call *);
- int id;
+ struct trace_event event;
const char *print_fmt;
- int (*raw_init)(struct ftrace_event_call *);
- int (*define_fields)(struct ftrace_event_call *);
- struct list_head fields;
- int filter_active;
struct event_filter *filter;
void *mod;
void *data;
+ /*
+ * 32 bit flags:
+ * bit 1: enabled
+ * bit 2: filter_active
+ *
+ * Changes to flags must hold the event_mutex.
+ *
+ * Note: Reads of flags do not hold the event_mutex since
+ * they occur in critical sections. But the way flags
+ * is currently used, these changes do no affect the code
+ * except that when a change is made, it may have a slight
+ * delay in propagating the changes to other CPUs due to
+ * caching and such.
+ */
+ unsigned int flags;
+
+#ifdef CONFIG_PERF_EVENTS
int perf_refcount;
- int (*perf_event_enable)(struct ftrace_event_call *);
- void (*perf_event_disable)(struct ftrace_event_call *);
+ struct hlist_head *perf_events;
+#endif
};
#define PERF_MAX_TRACE_SIZE 2048
@@ -194,24 +243,22 @@
DECLARE_PER_CPU(struct pt_regs, perf_trace_regs);
-extern int perf_trace_enable(int event_id);
-extern void perf_trace_disable(int event_id);
-extern int ftrace_profile_set_filter(struct perf_event *event, int event_id,
+extern int perf_trace_init(struct perf_event *event);
+extern void perf_trace_destroy(struct perf_event *event);
+extern int perf_trace_enable(struct perf_event *event);
+extern void perf_trace_disable(struct perf_event *event);
+extern int ftrace_profile_set_filter(struct perf_event *event, int event_id,
char *filter_str);
extern void ftrace_profile_free_filter(struct perf_event *event);
-extern void *
-perf_trace_buf_prepare(int size, unsigned short type, int *rctxp,
- unsigned long *irq_flags);
+extern void *perf_trace_buf_prepare(int size, unsigned short type,
+ struct pt_regs *regs, int *rctxp);
static inline void
perf_trace_buf_submit(void *raw_data, int size, int rctx, u64 addr,
- u64 count, unsigned long irq_flags, struct pt_regs *regs)
+ u64 count, struct pt_regs *regs, void *head)
{
- struct trace_entry *entry = raw_data;
-
- perf_tp_event(entry->type, addr, count, raw_data, size, regs);
+ perf_tp_event(addr, count, raw_data, size, regs, head);
perf_swevent_put_recursion_context(rctx);
- local_irq_restore(irq_flags);
}
#endif
diff --git a/include/linux/fuse.h b/include/linux/fuse.h
index 3e2925a..88e0eb5 100644
--- a/include/linux/fuse.h
+++ b/include/linux/fuse.h
@@ -34,6 +34,9 @@
* 7.13
* - make max number of background requests and congestion threshold
* tunables
+ *
+ * 7.14
+ * - add splice support to fuse device
*/
#ifndef _LINUX_FUSE_H
@@ -65,7 +68,7 @@
#define FUSE_KERNEL_VERSION 7
/** Minor version number of this interface */
-#define FUSE_KERNEL_MINOR_VERSION 13
+#define FUSE_KERNEL_MINOR_VERSION 14
/** The node ID of the root inode */
#define FUSE_ROOT_ID 1
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index 4e949a5..03f616b 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -51,6 +51,11 @@
return -ENOSYS;
}
+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
+{
+ return -ENOSYS;
+}
+
static inline int gpio_get_value(unsigned gpio)
{
/* GPIO can never have been requested or set as {in,out}put */
diff --git a/include/linux/i2c/adp8860.h b/include/linux/i2c/adp8860.h
new file mode 100644
index 0000000..0b4d398
--- /dev/null
+++ b/include/linux/i2c/adp8860.h
@@ -0,0 +1,154 @@
+/*
+ * Definitions and platform data for Analog Devices
+ * Backlight drivers ADP8860
+ *
+ * Copyright 2009-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __LINUX_I2C_ADP8860_H
+#define __LINUX_I2C_ADP8860_H
+
+#include <linux/leds.h>
+#include <linux/types.h>
+
+#define ID_ADP8860 8860
+
+#define ADP8860_MAX_BRIGHTNESS 0x7F
+#define FLAG_OFFT_SHIFT 8
+
+/*
+ * LEDs subdevice platform data
+ */
+
+#define ADP8860_LED_DIS_BLINK (0 << FLAG_OFFT_SHIFT)
+#define ADP8860_LED_OFFT_600ms (1 << FLAG_OFFT_SHIFT)
+#define ADP8860_LED_OFFT_1200ms (2 << FLAG_OFFT_SHIFT)
+#define ADP8860_LED_OFFT_1800ms (3 << FLAG_OFFT_SHIFT)
+
+#define ADP8860_LED_ONT_200ms 0
+#define ADP8860_LED_ONT_600ms 1
+#define ADP8860_LED_ONT_800ms 2
+#define ADP8860_LED_ONT_1200ms 3
+
+#define ADP8860_LED_D7 (7)
+#define ADP8860_LED_D6 (6)
+#define ADP8860_LED_D5 (5)
+#define ADP8860_LED_D4 (4)
+#define ADP8860_LED_D3 (3)
+#define ADP8860_LED_D2 (2)
+#define ADP8860_LED_D1 (1)
+
+/*
+ * Backlight subdevice platform data
+ */
+
+#define ADP8860_BL_D7 (1 << 6)
+#define ADP8860_BL_D6 (1 << 5)
+#define ADP8860_BL_D5 (1 << 4)
+#define ADP8860_BL_D4 (1 << 3)
+#define ADP8860_BL_D3 (1 << 2)
+#define ADP8860_BL_D2 (1 << 1)
+#define ADP8860_BL_D1 (1 << 0)
+
+#define ADP8860_FADE_T_DIS 0 /* Fade Timer Disabled */
+#define ADP8860_FADE_T_300ms 1 /* 0.3 Sec */
+#define ADP8860_FADE_T_600ms 2
+#define ADP8860_FADE_T_900ms 3
+#define ADP8860_FADE_T_1200ms 4
+#define ADP8860_FADE_T_1500ms 5
+#define ADP8860_FADE_T_1800ms 6
+#define ADP8860_FADE_T_2100ms 7
+#define ADP8860_FADE_T_2400ms 8
+#define ADP8860_FADE_T_2700ms 9
+#define ADP8860_FADE_T_3000ms 10
+#define ADP8860_FADE_T_3500ms 11
+#define ADP8860_FADE_T_4000ms 12
+#define ADP8860_FADE_T_4500ms 13
+#define ADP8860_FADE_T_5000ms 14
+#define ADP8860_FADE_T_5500ms 15 /* 5.5 Sec */
+
+#define ADP8860_FADE_LAW_LINEAR 0
+#define ADP8860_FADE_LAW_SQUARE 1
+#define ADP8860_FADE_LAW_CUBIC1 2
+#define ADP8860_FADE_LAW_CUBIC2 3
+
+#define ADP8860_BL_AMBL_FILT_80ms 0 /* Light sensor filter time */
+#define ADP8860_BL_AMBL_FILT_160ms 1
+#define ADP8860_BL_AMBL_FILT_320ms 2
+#define ADP8860_BL_AMBL_FILT_640ms 3
+#define ADP8860_BL_AMBL_FILT_1280ms 4
+#define ADP8860_BL_AMBL_FILT_2560ms 5
+#define ADP8860_BL_AMBL_FILT_5120ms 6
+#define ADP8860_BL_AMBL_FILT_10240ms 7 /* 10.24 sec */
+
+/*
+ * Blacklight current 0..30mA
+ */
+#define ADP8860_BL_CUR_mA(I) ((I * 127) / 30)
+
+/*
+ * L2 comparator current 0..1106uA
+ */
+#define ADP8860_L2_COMP_CURR_uA(I) ((I * 255) / 1106)
+
+/*
+ * L3 comparator current 0..138uA
+ */
+#define ADP8860_L3_COMP_CURR_uA(I) ((I * 255) / 138)
+
+struct adp8860_backlight_platform_data {
+ u8 bl_led_assign; /* 1 = Backlight 0 = Individual LED */
+
+ u8 bl_fade_in; /* Backlight Fade-In Timer */
+ u8 bl_fade_out; /* Backlight Fade-Out Timer */
+ u8 bl_fade_law; /* fade-on/fade-off transfer characteristic */
+
+ u8 en_ambl_sens; /* 1 = enable ambient light sensor */
+ u8 abml_filt; /* Light sensor filter time */
+
+ u8 l1_daylight_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l1_daylight_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l2_office_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l2_office_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l3_dark_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l3_dark_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+
+ u8 l2_trip; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+ u8 l2_hyst; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+ u8 l3_trip; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+ u8 l3_hyst; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+
+ /**
+ * Independent Current Sinks / LEDS
+ * Sinks not assigned to the Backlight can be exposed to
+ * user space using the LEDS CLASS interface
+ */
+
+ int num_leds;
+ struct led_info *leds;
+ u8 led_fade_in; /* LED Fade-In Timer */
+ u8 led_fade_out; /* LED Fade-Out Timer */
+ u8 led_fade_law; /* fade-on/fade-off transfer characteristic */
+ u8 led_on_time;
+
+ /**
+ * Gain down disable. Setting this option does not allow the
+ * charge pump to switch to lower gains. NOT AVAILABLE on ADP8860
+ * 1 = the charge pump doesn't switch down in gain until all LEDs are 0.
+ * The charge pump switches up in gain as needed. This feature is
+ * useful if the ADP8863 charge pump is used to drive an external load.
+ * This feature must be used when utilizing small fly capacitors
+ * (0402 or smaller).
+ * 0 = the charge pump automatically switches up and down in gain.
+ * This provides optimal efficiency, but is not suitable for driving
+ * loads that are not connected through the ADP8863 diode drivers.
+ * Additionally, the charge pump fly capacitors should be low ESR
+ * and sized 0603 or greater.
+ */
+
+ u8 gdwn_dis;
+};
+
+#endif /* __LINUX_I2C_ADP8860_H */
diff --git a/include/linux/i2c/max732x.h b/include/linux/i2c/max732x.h
index e103366..c04bac8 100644
--- a/include/linux/i2c/max732x.h
+++ b/include/linux/i2c/max732x.h
@@ -7,6 +7,9 @@
/* number of the first GPIO */
unsigned gpio_base;
+ /* interrupt base */
+ int irq_base;
+
void *context; /* param to setup/teardown */
int (*setup)(struct i2c_client *client,
diff --git a/include/linux/i2c/pca953x.h b/include/linux/i2c/pca953x.h
index d5c5a60..139ba52 100644
--- a/include/linux/i2c/pca953x.h
+++ b/include/linux/i2c/pca953x.h
@@ -24,7 +24,7 @@
int (*teardown)(struct i2c_client *client,
unsigned gpio, unsigned ngpio,
void *context);
- char **names;
+ const char *const *names;
};
#endif /* _LINUX_PCA953X_H */
diff --git a/include/linux/i8042.h b/include/linux/i8042.h
index 9bf6870..a986ff5 100644
--- a/include/linux/i8042.h
+++ b/include/linux/i8042.h
@@ -46,31 +46,31 @@
#else
-void i8042_lock_chip(void)
+static inline void i8042_lock_chip(void)
{
}
-void i8042_unlock_chip(void)
+static inline void i8042_unlock_chip(void)
{
}
-int i8042_command(unsigned char *param, int command)
+static inline int i8042_command(unsigned char *param, int command)
{
return -ENODEV;
}
-bool i8042_check_port_owner(const struct serio *serio)
+static inline bool i8042_check_port_owner(const struct serio *serio)
{
return false;
}
-int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
+static inline int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
struct serio *serio))
{
return -ENODEV;
}
-int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
+static inline int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
struct serio *serio))
{
return -ENODEV;
diff --git a/include/linux/init.h b/include/linux/init.h
index ab1d31f..de99430 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -301,7 +301,7 @@
#endif
/* Data marked not to be saved by software suspend */
-#define __nosavedata __section(.data.nosave)
+#define __nosavedata __section(.data..nosave)
/* This means "can be init if no module support, otherwise module load
may call it." */
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 7996fc2..1f43fa5 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -16,7 +16,7 @@
extern struct fs_struct init_fs;
#define INIT_SIGNALS(sig) { \
- .count = ATOMIC_INIT(1), \
+ .nr_threads = 1, \
.wait_chldexit = __WAIT_QUEUE_HEAD_INITIALIZER(sig.wait_chldexit),\
.shared_pending = { \
.list = LIST_HEAD_INIT(sig.shared_pending.list), \
@@ -35,7 +35,7 @@
#define INIT_SIGHAND(sighand) { \
.count = ATOMIC_INIT(1), \
- .action = { { { .sa_handler = NULL, } }, }, \
+ .action = { { { .sa_handler = SIG_DFL, } }, }, \
.siglock = __SPIN_LOCK_UNLOCKED(sighand.siglock), \
.signalfd_wqh = __WAIT_QUEUE_HEAD_INITIALIZER(sighand.signalfd_wqh), \
}
@@ -45,9 +45,9 @@
#define INIT_STRUCT_PID { \
.count = ATOMIC_INIT(1), \
.tasks = { \
- { .first = &init_task.pids[PIDTYPE_PID].node }, \
- { .first = &init_task.pids[PIDTYPE_PGID].node }, \
- { .first = &init_task.pids[PIDTYPE_SID].node }, \
+ { .first = NULL }, \
+ { .first = NULL }, \
+ { .first = NULL }, \
}, \
.level = 0, \
.numbers = { { \
@@ -61,7 +61,7 @@
{ \
.node = { \
.next = NULL, \
- .pprev = &init_struct_pid.tasks[type].first, \
+ .pprev = NULL, \
}, \
.pid = &init_struct_pid, \
}
@@ -163,6 +163,7 @@
[PIDTYPE_PGID] = INIT_PID_LINK(PIDTYPE_PGID), \
[PIDTYPE_SID] = INIT_PID_LINK(PIDTYPE_SID), \
}, \
+ .thread_group = LIST_HEAD_INIT(tsk.thread_group), \
.dirties = INIT_PROP_LOCAL_SINGLE(dirties), \
INIT_IDS \
INIT_PERF_EVENTS(tsk) \
@@ -182,7 +183,7 @@
}
/* Attach to the init_task data structure for proper alignment */
-#define __init_task_data __attribute__((__section__(".data.init_task")))
+#define __init_task_data __attribute__((__section__(".data..init_task")))
#endif
diff --git a/include/linux/input.h b/include/linux/input.h
index 83524e4..6fcc910 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -1155,7 +1155,7 @@
int sync;
- int abs[ABS_MAX + 1];
+ int abs[ABS_CNT];
int rep[REP_MAX + 1];
unsigned long key[BITS_TO_LONGS(KEY_CNT)];
@@ -1163,11 +1163,11 @@
unsigned long snd[BITS_TO_LONGS(SND_CNT)];
unsigned long sw[BITS_TO_LONGS(SW_CNT)];
- int absmax[ABS_MAX + 1];
- int absmin[ABS_MAX + 1];
- int absfuzz[ABS_MAX + 1];
- int absflat[ABS_MAX + 1];
- int absres[ABS_MAX + 1];
+ int absmax[ABS_CNT];
+ int absmin[ABS_CNT];
+ int absfuzz[ABS_CNT];
+ int absflat[ABS_CNT];
+ int absres[ABS_CNT];
int (*open)(struct input_dev *dev);
void (*close)(struct input_dev *dev);
diff --git a/include/linux/input/tps6507x-ts.h b/include/linux/input/tps6507x-ts.h
new file mode 100644
index 0000000..ab14403
--- /dev/null
+++ b/include/linux/input/tps6507x-ts.h
@@ -0,0 +1,24 @@
+/* linux/i2c/tps6507x-ts.h
+ *
+ * Functions to access TPS65070 touch screen chip.
+ *
+ * Copyright (c) 2009 RidgeRun (todd.fischer@ridgerun.com)
+ *
+ *
+ * For licencing details see kernel-base/COPYING
+ */
+
+#ifndef __LINUX_I2C_TPS6507X_TS_H
+#define __LINUX_I2C_TPS6507X_TS_H
+
+/* Board specific touch screen initial values */
+struct touchscreen_init_data {
+ int poll_period; /* ms */
+ int vref; /* non-zero to leave vref on */
+ __u16 min_pressure; /* min reading to be treated as a touch */
+ __u16 vendor;
+ __u16 product;
+ __u16 version;
+};
+
+#endif /* __LINUX_I2C_TPS6507X_TS_H */
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index a0bb301..64d5291 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -7,7 +7,6 @@
struct cfq_queue;
struct cfq_io_context {
void *key;
- unsigned long dead_key;
struct cfq_queue *cfqq[2];
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index a4d2e9f..adf832d 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -1026,11 +1026,12 @@
struct jbd2_buffer_trigger_type {
/*
- * Fired just before a buffer is written to the journal.
- * mapped_data is a mapped buffer that is the frozen data for
- * commit.
+ * Fired a the moment data to write to the journal are known to be
+ * stable - so either at the moment b_frozen_data is created or just
+ * before a buffer is written to the journal. mapped_data is a mapped
+ * buffer that is the frozen data for commit.
*/
- void (*t_commit)(struct jbd2_buffer_trigger_type *type,
+ void (*t_frozen)(struct jbd2_buffer_trigger_type *type,
struct buffer_head *bh, void *mapped_data,
size_t size);
@@ -1042,7 +1043,7 @@
struct buffer_head *bh);
};
-extern void jbd2_buffer_commit_trigger(struct journal_head *jh,
+extern void jbd2_buffer_frozen_trigger(struct journal_head *jh,
void *mapped_data,
struct jbd2_buffer_trigger_type *triggers);
extern void jbd2_buffer_abort_trigger(struct journal_head *jh,
diff --git a/include/linux/joystick.h b/include/linux/joystick.h
index 9e20c29..47199b1 100644
--- a/include/linux/joystick.h
+++ b/include/linux/joystick.h
@@ -64,8 +64,8 @@
#define JSIOCSCORR _IOW('j', 0x21, struct js_corr) /* set correction values */
#define JSIOCGCORR _IOR('j', 0x22, struct js_corr) /* get correction values */
-#define JSIOCSAXMAP _IOW('j', 0x31, __u8[ABS_MAX + 1]) /* set axis mapping */
-#define JSIOCGAXMAP _IOR('j', 0x32, __u8[ABS_MAX + 1]) /* get axis mapping */
+#define JSIOCSAXMAP _IOW('j', 0x31, __u8[ABS_CNT]) /* set axis mapping */
+#define JSIOCGAXMAP _IOR('j', 0x32, __u8[ABS_CNT]) /* get axis mapping */
#define JSIOCSBTNMAP _IOW('j', 0x33, __u16[KEY_MAX - BTN_MISC + 1]) /* set button mapping */
#define JSIOCGBTNMAP _IOR('j', 0x34, __u16[KEY_MAX - BTN_MISC + 1]) /* get button mapping */
diff --git a/include/linux/kmod.h b/include/linux/kmod.h
index facb27f..6efd7a7 100644
--- a/include/linux/kmod.h
+++ b/include/linux/kmod.h
@@ -23,6 +23,7 @@
#include <linux/stddef.h>
#include <linux/errno.h>
#include <linux/compiler.h>
+#include <linux/workqueue.h>
#define KMOD_PATH_LEN 256
@@ -45,19 +46,6 @@
struct key;
struct file;
-struct subprocess_info;
-
-/* Allocate a subprocess_info structure */
-struct subprocess_info *call_usermodehelper_setup(char *path, char **argv,
- char **envp, gfp_t gfp_mask);
-
-/* Set various pieces of state into the subprocess_info structure */
-void call_usermodehelper_setkeys(struct subprocess_info *info,
- struct key *session_keyring);
-int call_usermodehelper_stdinpipe(struct subprocess_info *sub_info,
- struct file **filp);
-void call_usermodehelper_setcleanup(struct subprocess_info *info,
- void (*cleanup)(char **argv, char **envp));
enum umh_wait {
UMH_NO_WAIT = -1, /* don't wait at all */
@@ -65,6 +53,29 @@
UMH_WAIT_PROC = 1, /* wait for the process to complete */
};
+struct subprocess_info {
+ struct work_struct work;
+ struct completion *complete;
+ char *path;
+ char **argv;
+ char **envp;
+ enum umh_wait wait;
+ int retval;
+ int (*init)(struct subprocess_info *info);
+ void (*cleanup)(struct subprocess_info *info);
+ void *data;
+};
+
+/* Allocate a subprocess_info structure */
+struct subprocess_info *call_usermodehelper_setup(char *path, char **argv,
+ char **envp, gfp_t gfp_mask);
+
+/* Set various pieces of state into the subprocess_info structure */
+void call_usermodehelper_setfns(struct subprocess_info *info,
+ int (*init)(struct subprocess_info *info),
+ void (*cleanup)(struct subprocess_info *info),
+ void *data);
+
/* Actually execute the sub-process */
int call_usermodehelper_exec(struct subprocess_info *info, enum umh_wait wait);
@@ -73,38 +84,33 @@
void call_usermodehelper_freeinfo(struct subprocess_info *info);
static inline int
-call_usermodehelper(char *path, char **argv, char **envp, enum umh_wait wait)
+call_usermodehelper_fns(char *path, char **argv, char **envp,
+ enum umh_wait wait,
+ int (*init)(struct subprocess_info *info),
+ void (*cleanup)(struct subprocess_info *), void *data)
{
struct subprocess_info *info;
gfp_t gfp_mask = (wait == UMH_NO_WAIT) ? GFP_ATOMIC : GFP_KERNEL;
info = call_usermodehelper_setup(path, argv, envp, gfp_mask);
+
if (info == NULL)
return -ENOMEM;
+
+ call_usermodehelper_setfns(info, init, cleanup, data);
+
return call_usermodehelper_exec(info, wait);
}
static inline int
-call_usermodehelper_keys(char *path, char **argv, char **envp,
- struct key *session_keyring, enum umh_wait wait)
+call_usermodehelper(char *path, char **argv, char **envp, enum umh_wait wait)
{
- struct subprocess_info *info;
- gfp_t gfp_mask = (wait == UMH_NO_WAIT) ? GFP_ATOMIC : GFP_KERNEL;
-
- info = call_usermodehelper_setup(path, argv, envp, gfp_mask);
- if (info == NULL)
- return -ENOMEM;
-
- call_usermodehelper_setkeys(info, session_keyring);
- return call_usermodehelper_exec(info, wait);
+ return call_usermodehelper_fns(path, argv, envp, wait,
+ NULL, NULL, NULL);
}
extern void usermodehelper_init(void);
-struct file;
-extern int call_usermodehelper_pipe(char *path, char *argv[], char *envp[],
- struct file **filp);
-
extern int usermodehelper_disable(void);
extern void usermodehelper_enable(void);
diff --git a/include/linux/lcd.h b/include/linux/lcd.h
index c67feca..8877123 100644
--- a/include/linux/lcd.h
+++ b/include/linux/lcd.h
@@ -69,6 +69,29 @@
struct device dev;
};
+struct lcd_platform_data {
+ /* reset lcd panel device. */
+ int (*reset)(struct lcd_device *ld);
+ /* on or off to lcd panel. if 'enable' is 0 then
+ lcd power off and 1, lcd power on. */
+ int (*power_on)(struct lcd_device *ld, int enable);
+
+ /* it indicates whether lcd panel was enabled
+ from bootloader or not. */
+ int lcd_enabled;
+ /* it means delay for stable time when it becomes low to high
+ or high to low that is dependent on whether reset gpio is
+ low active or high active. */
+ unsigned int reset_delay;
+ /* stable time needing to become lcd power on. */
+ unsigned int power_on_delay;
+ /* stable time needing to become lcd power off. */
+ unsigned int power_off_delay;
+
+ /* it could be used for any purpose. */
+ void *pdata;
+};
+
static inline void lcd_set_power(struct lcd_device *ld, int power)
{
mutex_lock(&ld->update_lock);
diff --git a/include/linux/leds.h b/include/linux/leds.h
index d8bf966..ba6986a 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -149,14 +149,18 @@
unsigned default_state : 2;
/* default_state should be one of LEDS_GPIO_DEFSTATE_(ON|OFF|KEEP) */
};
-#define LEDS_GPIO_DEFSTATE_OFF 0
-#define LEDS_GPIO_DEFSTATE_ON 1
-#define LEDS_GPIO_DEFSTATE_KEEP 2
+#define LEDS_GPIO_DEFSTATE_OFF 0
+#define LEDS_GPIO_DEFSTATE_ON 1
+#define LEDS_GPIO_DEFSTATE_KEEP 2
struct gpio_led_platform_data {
int num_leds;
struct gpio_led *leds;
- int (*gpio_blink_set)(unsigned gpio,
+
+#define GPIO_LED_NO_BLINK_LOW 0 /* No blink GPIO state low */
+#define GPIO_LED_NO_BLINK_HIGH 1 /* No blink GPIO state high */
+#define GPIO_LED_BLINK 2 /* Plase, blink */
+ int (*gpio_blink_set)(unsigned gpio, int state,
unsigned long *delay_on,
unsigned long *delay_off);
};
diff --git a/include/linux/libata.h b/include/linux/libata.h
index ee84e7e..b85f3ff 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -386,6 +386,7 @@
ATA_HORKAGE_1_5_GBPS = (1 << 13), /* force 1.5 Gbps */
ATA_HORKAGE_NOSETXFER = (1 << 14), /* skip SETXFER, SATA only */
ATA_HORKAGE_BROKEN_FPDMA_AA = (1 << 15), /* skip AA */
+ ATA_HORKAGE_DUMP_ID = (1 << 16), /* dump IDENTIFY data */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
@@ -513,7 +514,9 @@
void __iomem *command_addr;
void __iomem *altstatus_addr;
void __iomem *ctl_addr;
+#ifdef CONFIG_ATA_BMDMA
void __iomem *bmdma_addr;
+#endif /* CONFIG_ATA_BMDMA */
void __iomem *scr_addr;
};
#endif /* CONFIG_ATA_SFF */
@@ -721,8 +724,10 @@
u8 ctl; /* cache of ATA control register */
u8 last_ctl; /* Cache last written value */
struct delayed_work sff_pio_task;
+#ifdef CONFIG_ATA_BMDMA
struct ata_bmdma_prd *bmdma_prd; /* BMDMA SG list */
dma_addr_t bmdma_prd_dma; /* and its DMA mapping */
+#endif /* CONFIG_ATA_BMDMA */
#endif /* CONFIG_ATA_SFF */
unsigned int pio_mask;
@@ -856,10 +861,12 @@
void (*sff_irq_clear)(struct ata_port *);
void (*sff_drain_fifo)(struct ata_queued_cmd *qc);
+#ifdef CONFIG_ATA_BMDMA
void (*bmdma_setup)(struct ata_queued_cmd *qc);
void (*bmdma_start)(struct ata_queued_cmd *qc);
void (*bmdma_stop)(struct ata_queued_cmd *qc);
u8 (*bmdma_status)(struct ata_port *ap);
+#endif /* CONFIG_ATA_BMDMA */
#endif /* CONFIG_ATA_SFF */
ssize_t (*em_show)(struct ata_port *ap, char *buf);
@@ -1016,6 +1023,7 @@
extern int ata_std_bios_param(struct scsi_device *sdev,
struct block_device *bdev,
sector_t capacity, int geom[]);
+extern void ata_scsi_unlock_native_capacity(struct scsi_device *sdev);
extern int ata_scsi_slave_config(struct scsi_device *sdev);
extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
@@ -1167,6 +1175,7 @@
.slave_configure = ata_scsi_slave_config, \
.slave_destroy = ata_scsi_slave_destroy, \
.bios_param = ata_std_bios_param, \
+ .unlock_native_capacity = ata_scsi_unlock_native_capacity, \
.sdev_attrs = ata_common_sdev_attrs
#define ATA_NCQ_SHT(drv_name) \
@@ -1555,7 +1564,6 @@
#ifdef CONFIG_ATA_SFF
extern const struct ata_port_operations ata_sff_port_ops;
-extern const struct ata_port_operations ata_bmdma_port_ops;
extern const struct ata_port_operations ata_bmdma32_port_ops;
/* PIO only, sg_tablesize and dma_boundary limits can be removed */
@@ -1564,11 +1572,6 @@
.sg_tablesize = LIBATA_MAX_PRD, \
.dma_boundary = ATA_DMA_BOUNDARY
-#define ATA_BMDMA_SHT(drv_name) \
- ATA_BASE_SHT(drv_name), \
- .sg_tablesize = LIBATA_MAX_PRD, \
- .dma_boundary = ATA_DMA_BOUNDARY
-
extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device);
extern u8 ata_sff_check_status(struct ata_port *ap);
extern void ata_sff_pause(struct ata_port *ap);
@@ -1593,7 +1596,7 @@
extern void ata_sff_queue_pio_task(struct ata_port *ap, unsigned long delay);
extern unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc);
extern bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc);
-extern unsigned int ata_sff_host_intr(struct ata_port *ap,
+extern unsigned int ata_sff_port_intr(struct ata_port *ap,
struct ata_queued_cmd *qc);
extern irqreturn_t ata_sff_interrupt(int irq, void *dev_instance);
extern void ata_sff_lost_interrupt(struct ata_port *ap);
@@ -1625,11 +1628,24 @@
struct scsi_host_template *sht, void *host_priv, int hflags);
#endif /* CONFIG_PCI */
+#ifdef CONFIG_ATA_BMDMA
+
+extern const struct ata_port_operations ata_bmdma_port_ops;
+
+#define ATA_BMDMA_SHT(drv_name) \
+ ATA_BASE_SHT(drv_name), \
+ .sg_tablesize = LIBATA_MAX_PRD, \
+ .dma_boundary = ATA_DMA_BOUNDARY
+
extern void ata_bmdma_qc_prep(struct ata_queued_cmd *qc);
extern unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc);
extern void ata_bmdma_dumb_qc_prep(struct ata_queued_cmd *qc);
+extern unsigned int ata_bmdma_port_intr(struct ata_port *ap,
+ struct ata_queued_cmd *qc);
+extern irqreturn_t ata_bmdma_interrupt(int irq, void *dev_instance);
extern void ata_bmdma_error_handler(struct ata_port *ap);
extern void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc);
+extern void ata_bmdma_irq_clear(struct ata_port *ap);
extern void ata_bmdma_setup(struct ata_queued_cmd *qc);
extern void ata_bmdma_start(struct ata_queued_cmd *qc);
extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
@@ -1640,7 +1656,15 @@
#ifdef CONFIG_PCI
extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
extern void ata_pci_bmdma_init(struct ata_host *host);
+extern int ata_pci_bmdma_prepare_host(struct pci_dev *pdev,
+ const struct ata_port_info * const * ppi,
+ struct ata_host **r_host);
+extern int ata_pci_bmdma_init_one(struct pci_dev *pdev,
+ const struct ata_port_info * const * ppi,
+ struct scsi_host_template *sht,
+ void *host_priv, int hflags);
#endif /* CONFIG_PCI */
+#endif /* CONFIG_ATA_BMDMA */
/**
* ata_sff_busy_wait - Wait for a port status register
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index 5126cce..7135ebc 100644
--- a/include/linux/linkage.h
+++ b/include/linux/linkage.h
@@ -18,8 +18,8 @@
# define asmregparm
#endif
-#define __page_aligned_data __section(.data.page_aligned) __aligned(PAGE_SIZE)
-#define __page_aligned_bss __section(.bss.page_aligned) __aligned(PAGE_SIZE)
+#define __page_aligned_data __section(.data..page_aligned) __aligned(PAGE_SIZE)
+#define __page_aligned_bss __section(.bss..page_aligned) __aligned(PAGE_SIZE)
/*
* For assembly routines.
@@ -27,8 +27,8 @@
* Note when using these that you must specify the appropriate
* alignment directives yourself
*/
-#define __PAGE_ALIGNED_DATA .section ".data.page_aligned", "aw"
-#define __PAGE_ALIGNED_BSS .section ".bss.page_aligned", "aw"
+#define __PAGE_ALIGNED_DATA .section ".data..page_aligned", "aw"
+#define __PAGE_ALIGNED_BSS .section ".bss..page_aligned", "aw"
/*
* This is used by architectures to keep arguments on the stack
diff --git a/include/linux/list.h b/include/linux/list.h
index 8392884..5d57a3a 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -544,6 +544,21 @@
&pos->member != (head); \
pos = n, n = list_entry(n->member.prev, typeof(*n), member))
+/**
+ * list_safe_reset_next - reset a stale list_for_each_entry_safe loop
+ * @pos: the loop cursor used in the list_for_each_entry_safe loop
+ * @n: temporary storage used in list_for_each_entry_safe
+ * @member: the name of the list_struct within the struct.
+ *
+ * list_safe_reset_next is not safe to use in general if the list may be
+ * modified concurrently (eg. the lock is dropped in the loop body). An
+ * exception to this is if the cursor element (pos) is pinned in the list,
+ * and list_safe_reset_next is called after re-taking the lock and before
+ * completing the current iteration of the loop body.
+ */
+#define list_safe_reset_next(pos, n, member) \
+ n = list_entry(pos->member.next, typeof(*pos), member)
+
/*
* Double linked lists with a single pointer list head.
* Mostly useful for hash tables where the two pointer list head is
diff --git a/include/linux/lmb.h b/include/linux/lmb.h
deleted file mode 100644
index f3d1433..0000000
--- a/include/linux/lmb.h
+++ /dev/null
@@ -1,89 +0,0 @@
-#ifndef _LINUX_LMB_H
-#define _LINUX_LMB_H
-#ifdef __KERNEL__
-
-/*
- * Logical memory blocks.
- *
- * Copyright (C) 2001 Peter Bergner, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-
-#define MAX_LMB_REGIONS 128
-
-struct lmb_property {
- u64 base;
- u64 size;
-};
-
-struct lmb_region {
- unsigned long cnt;
- u64 size;
- struct lmb_property region[MAX_LMB_REGIONS+1];
-};
-
-struct lmb {
- unsigned long debug;
- u64 rmo_size;
- struct lmb_region memory;
- struct lmb_region reserved;
-};
-
-extern struct lmb lmb;
-
-extern void __init lmb_init(void);
-extern void __init lmb_analyze(void);
-extern long lmb_add(u64 base, u64 size);
-extern long lmb_remove(u64 base, u64 size);
-extern long __init lmb_free(u64 base, u64 size);
-extern long __init lmb_reserve(u64 base, u64 size);
-extern u64 __init lmb_alloc_nid(u64 size, u64 align, int nid,
- u64 (*nid_range)(u64, u64, int *));
-extern u64 __init lmb_alloc(u64 size, u64 align);
-extern u64 __init lmb_alloc_base(u64 size,
- u64, u64 max_addr);
-extern u64 __init __lmb_alloc_base(u64 size,
- u64 align, u64 max_addr);
-extern u64 __init lmb_phys_mem_size(void);
-extern u64 lmb_end_of_DRAM(void);
-extern void __init lmb_enforce_memory_limit(u64 memory_limit);
-extern int __init lmb_is_reserved(u64 addr);
-extern int lmb_is_region_reserved(u64 base, u64 size);
-extern int lmb_find(struct lmb_property *res);
-
-extern void lmb_dump_all(void);
-
-static inline u64
-lmb_size_bytes(struct lmb_region *type, unsigned long region_nr)
-{
- return type->region[region_nr].size;
-}
-static inline u64
-lmb_size_pages(struct lmb_region *type, unsigned long region_nr)
-{
- return lmb_size_bytes(type, region_nr) >> PAGE_SHIFT;
-}
-static inline u64
-lmb_start_pfn(struct lmb_region *type, unsigned long region_nr)
-{
- return type->region[region_nr].base >> PAGE_SHIFT;
-}
-static inline u64
-lmb_end_pfn(struct lmb_region *type, unsigned long region_nr)
-{
- return lmb_start_pfn(type, region_nr) +
- lmb_size_pages(type, region_nr);
-}
-
-#include <asm/lmb.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_LMB_H */
diff --git a/include/linux/memblock.h b/include/linux/memblock.h
new file mode 100644
index 0000000..a59faf2
--- /dev/null
+++ b/include/linux/memblock.h
@@ -0,0 +1,89 @@
+#ifndef _LINUX_MEMBLOCK_H
+#define _LINUX_MEMBLOCK_H
+#ifdef __KERNEL__
+
+/*
+ * Logical memory blocks.
+ *
+ * Copyright (C) 2001 Peter Bergner, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#define MAX_MEMBLOCK_REGIONS 128
+
+struct memblock_property {
+ u64 base;
+ u64 size;
+};
+
+struct memblock_region {
+ unsigned long cnt;
+ u64 size;
+ struct memblock_property region[MAX_MEMBLOCK_REGIONS+1];
+};
+
+struct memblock {
+ unsigned long debug;
+ u64 rmo_size;
+ struct memblock_region memory;
+ struct memblock_region reserved;
+};
+
+extern struct memblock memblock;
+
+extern void __init memblock_init(void);
+extern void __init memblock_analyze(void);
+extern long memblock_add(u64 base, u64 size);
+extern long memblock_remove(u64 base, u64 size);
+extern long __init memblock_free(u64 base, u64 size);
+extern long __init memblock_reserve(u64 base, u64 size);
+extern u64 __init memblock_alloc_nid(u64 size, u64 align, int nid,
+ u64 (*nid_range)(u64, u64, int *));
+extern u64 __init memblock_alloc(u64 size, u64 align);
+extern u64 __init memblock_alloc_base(u64 size,
+ u64, u64 max_addr);
+extern u64 __init __memblock_alloc_base(u64 size,
+ u64 align, u64 max_addr);
+extern u64 __init memblock_phys_mem_size(void);
+extern u64 memblock_end_of_DRAM(void);
+extern void __init memblock_enforce_memory_limit(u64 memory_limit);
+extern int __init memblock_is_reserved(u64 addr);
+extern int memblock_is_region_reserved(u64 base, u64 size);
+extern int memblock_find(struct memblock_property *res);
+
+extern void memblock_dump_all(void);
+
+static inline u64
+memblock_size_bytes(struct memblock_region *type, unsigned long region_nr)
+{
+ return type->region[region_nr].size;
+}
+static inline u64
+memblock_size_pages(struct memblock_region *type, unsigned long region_nr)
+{
+ return memblock_size_bytes(type, region_nr) >> PAGE_SHIFT;
+}
+static inline u64
+memblock_start_pfn(struct memblock_region *type, unsigned long region_nr)
+{
+ return type->region[region_nr].base >> PAGE_SHIFT;
+}
+static inline u64
+memblock_end_pfn(struct memblock_region *type, unsigned long region_nr)
+{
+ return memblock_start_pfn(type, region_nr) +
+ memblock_size_pages(type, region_nr);
+}
+
+#include <asm/memblock.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_MEMBLOCK_H */
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 0589479..9411d32 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -90,7 +90,8 @@
extern struct cgroup_subsys_state *mem_cgroup_css(struct mem_cgroup *mem);
extern int
-mem_cgroup_prepare_migration(struct page *page, struct mem_cgroup **ptr);
+mem_cgroup_prepare_migration(struct page *page,
+ struct page *newpage, struct mem_cgroup **ptr);
extern void mem_cgroup_end_migration(struct mem_cgroup *mem,
struct page *oldpage, struct page *newpage);
@@ -227,7 +228,8 @@
}
static inline int
-mem_cgroup_prepare_migration(struct page *page, struct mem_cgroup **ptr)
+mem_cgroup_prepare_migration(struct page *page, struct page *newpage,
+ struct mem_cgroup **ptr)
{
return 0;
}
diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h
index e3c4ff8..bfd23be 100644
--- a/include/linux/mfd/88pm860x.h
+++ b/include/linux/mfd/88pm860x.h
@@ -370,7 +370,7 @@
unsigned char);
extern int pm860x_device_init(struct pm860x_chip *chip,
- struct pm860x_platform_data *pdata);
-extern void pm860x_device_exit(struct pm860x_chip *chip);
+ struct pm860x_platform_data *pdata) __devinit ;
+extern void pm860x_device_exit(struct pm860x_chip *chip) __devexit ;
#endif /* __LINUX_MFD_88PM860X_H */
diff --git a/include/linux/mfd/ab3100.h b/include/linux/mfd/ab3100.h
deleted file mode 100644
index 9a881c3..0000000
--- a/include/linux/mfd/ab3100.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * AB3100 core access functions
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#include <linux/device.h>
-#include <linux/regulator/machine.h>
-
-#ifndef MFD_AB3100_H
-#define MFD_AB3100_H
-
-#define ABUNKNOWN 0
-#define AB3000 1
-#define AB3100 2
-
-/*
- * AB3100, EVENTA1, A2 and A3 event register flags
- * these are catenated into a single 32-bit flag in the code
- * for event notification broadcasts.
- */
-#define AB3100_EVENTA1_ONSWA (0x01<<16)
-#define AB3100_EVENTA1_ONSWB (0x02<<16)
-#define AB3100_EVENTA1_ONSWC (0x04<<16)
-#define AB3100_EVENTA1_DCIO (0x08<<16)
-#define AB3100_EVENTA1_OVER_TEMP (0x10<<16)
-#define AB3100_EVENTA1_SIM_OFF (0x20<<16)
-#define AB3100_EVENTA1_VBUS (0x40<<16)
-#define AB3100_EVENTA1_VSET_USB (0x80<<16)
-
-#define AB3100_EVENTA2_READY_TX (0x01<<8)
-#define AB3100_EVENTA2_READY_RX (0x02<<8)
-#define AB3100_EVENTA2_OVERRUN_ERROR (0x04<<8)
-#define AB3100_EVENTA2_FRAMING_ERROR (0x08<<8)
-#define AB3100_EVENTA2_CHARG_OVERCURRENT (0x10<<8)
-#define AB3100_EVENTA2_MIDR (0x20<<8)
-#define AB3100_EVENTA2_BATTERY_REM (0x40<<8)
-#define AB3100_EVENTA2_ALARM (0x80<<8)
-
-#define AB3100_EVENTA3_ADC_TRIG5 (0x01)
-#define AB3100_EVENTA3_ADC_TRIG4 (0x02)
-#define AB3100_EVENTA3_ADC_TRIG3 (0x04)
-#define AB3100_EVENTA3_ADC_TRIG2 (0x08)
-#define AB3100_EVENTA3_ADC_TRIGVBAT (0x10)
-#define AB3100_EVENTA3_ADC_TRIGVTX (0x20)
-#define AB3100_EVENTA3_ADC_TRIG1 (0x40)
-#define AB3100_EVENTA3_ADC_TRIG0 (0x80)
-
-/* AB3100, STR register flags */
-#define AB3100_STR_ONSWA (0x01)
-#define AB3100_STR_ONSWB (0x02)
-#define AB3100_STR_ONSWC (0x04)
-#define AB3100_STR_DCIO (0x08)
-#define AB3100_STR_BOOT_MODE (0x10)
-#define AB3100_STR_SIM_OFF (0x20)
-#define AB3100_STR_BATT_REMOVAL (0x40)
-#define AB3100_STR_VBUS (0x80)
-
-/*
- * AB3100 contains 8 regulators, one external regulator controller
- * and a buck converter, further the LDO E and buck converter can
- * have separate settings if they are in sleep mode, this is
- * modeled as a separate regulator.
- */
-#define AB3100_NUM_REGULATORS 10
-
-/**
- * struct ab3100
- * @access_mutex: lock out concurrent accesses to the AB3100 registers
- * @dev: pointer to the containing device
- * @i2c_client: I2C client for this chip
- * @testreg_client: secondary client for test registers
- * @chip_name: name of this chip variant
- * @chip_id: 8 bit chip ID for this chip variant
- * @event_subscribers: event subscribers are listed here
- * @startup_events: a copy of the first reading of the event registers
- * @startup_events_read: whether the first events have been read
- *
- * This struct is PRIVATE and devices using it should NOT
- * access ANY fields. It is used as a token for calling the
- * AB3100 functions.
- */
-struct ab3100 {
- struct mutex access_mutex;
- struct device *dev;
- struct i2c_client *i2c_client;
- struct i2c_client *testreg_client;
- char chip_name[32];
- u8 chip_id;
- struct blocking_notifier_head event_subscribers;
- u32 startup_events;
- bool startup_events_read;
-};
-
-/**
- * struct ab3100_platform_data
- * Data supplied to initialize board connections to the AB3100
- * @reg_constraints: regulator constraints for target board
- * the order of these constraints are: LDO A, C, D, E,
- * F, G, H, K, EXT and BUCK.
- * @reg_initvals: initial values for the regulator registers
- * plus two sleep settings for LDO E and the BUCK converter.
- * exactly AB3100_NUM_REGULATORS+2 values must be sent in.
- * Order: LDO A, C, E, E sleep, F, G, H, K, EXT, BUCK,
- * BUCK sleep, LDO D. (LDO D need to be initialized last.)
- * @external_voltage: voltage level of the external regulator.
- */
-struct ab3100_platform_data {
- struct regulator_init_data reg_constraints[AB3100_NUM_REGULATORS];
- u8 reg_initvals[AB3100_NUM_REGULATORS+2];
- int external_voltage;
-};
-
-int ab3100_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval);
-int ab3100_get_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 *regval);
-int ab3100_get_register_page_interruptible(struct ab3100 *ab3100,
- u8 first_reg, u8 *regvals, u8 numregs);
-int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100,
- u8 reg, u8 andmask, u8 ormask);
-u8 ab3100_get_chip_type(struct ab3100 *ab3100);
-int ab3100_event_register(struct ab3100 *ab3100,
- struct notifier_block *nb);
-int ab3100_event_unregister(struct ab3100 *ab3100,
- struct notifier_block *nb);
-int ab3100_event_registers_startup_state_get(struct ab3100 *ab3100,
- u32 *fatevent);
-
-#endif
diff --git a/include/linux/mfd/ab4500.h b/include/linux/mfd/ab4500.h
deleted file mode 100644
index a42a703..0000000
--- a/include/linux/mfd/ab4500.h
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson
- *
- * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- * AB4500 device core funtions, for client access
- */
-#ifndef MFD_AB4500_H
-#define MFD_AB4500_H
-
-#include <linux/device.h>
-
-/*
- * AB4500 bank addresses
- */
-#define AB4500_SYS_CTRL1_BLOCK 0x1
-#define AB4500_SYS_CTRL2_BLOCK 0x2
-#define AB4500_REGU_CTRL1 0x3
-#define AB4500_REGU_CTRL2 0x4
-#define AB4500_USB 0x5
-#define AB4500_TVOUT 0x6
-#define AB4500_DBI 0x7
-#define AB4500_ECI_AV_ACC 0x8
-#define AB4500_RESERVED 0x9
-#define AB4500_GPADC 0xA
-#define AB4500_CHARGER 0xB
-#define AB4500_GAS_GAUGE 0xC
-#define AB4500_AUDIO 0xD
-#define AB4500_INTERRUPT 0xE
-#define AB4500_RTC 0xF
-#define AB4500_MISC 0x10
-#define AB4500_DEBUG 0x12
-#define AB4500_PROD_TEST 0x13
-#define AB4500_OTP_EMUL 0x15
-
-/*
- * System control 1 register offsets.
- * Bank = 0x01
- */
-#define AB4500_TURNON_STAT_REG 0x0100
-#define AB4500_RESET_STAT_REG 0x0101
-#define AB4500_PONKEY1_PRESS_STAT_REG 0x0102
-
-#define AB4500_FSM_STAT1_REG 0x0140
-#define AB4500_FSM_STAT2_REG 0x0141
-#define AB4500_SYSCLK_REQ_STAT_REG 0x0142
-#define AB4500_USB_STAT1_REG 0x0143
-#define AB4500_USB_STAT2_REG 0x0144
-#define AB4500_STATUS_SPARE1_REG 0x0145
-#define AB4500_STATUS_SPARE2_REG 0x0146
-
-#define AB4500_CTRL1_REG 0x0180
-#define AB4500_CTRL2_REG 0x0181
-
-/*
- * System control 2 register offsets.
- * bank = 0x02
- */
-#define AB4500_CTRL3_REG 0x0200
-#define AB4500_MAIN_WDOG_CTRL_REG 0x0201
-#define AB4500_MAIN_WDOG_TIMER_REG 0x0202
-#define AB4500_LOW_BAT_REG 0x0203
-#define AB4500_BATT_OK_REG 0x0204
-#define AB4500_SYSCLK_TIMER_REG 0x0205
-#define AB4500_SMPSCLK_CTRL_REG 0x0206
-#define AB4500_SMPSCLK_SEL1_REG 0x0207
-#define AB4500_SMPSCLK_SEL2_REG 0x0208
-#define AB4500_SMPSCLK_SEL3_REG 0x0209
-#define AB4500_SYSULPCLK_CONF_REG 0x020A
-#define AB4500_SYSULPCLK_CTRL1_REG 0x020B
-#define AB4500_SYSCLK_CTRL_REG 0x020C
-#define AB4500_SYSCLK_REQ1_VALID_REG 0x020D
-#define AB4500_SYSCLK_REQ_VALID_REG 0x020E
-#define AB4500_SYSCTRL_SPARE_REG 0x020F
-#define AB4500_PAD_CONF_REG 0x0210
-
-/*
- * Regu control1 register offsets
- * Bank = 0x03
- */
-#define AB4500_REGU_SERIAL_CTRL1_REG 0x0300
-#define AB4500_REGU_SERIAL_CTRL2_REG 0x0301
-#define AB4500_REGU_SERIAL_CTRL3_REG 0x0302
-#define AB4500_REGU_REQ_CTRL1_REG 0x0303
-#define AB4500_REGU_REQ_CTRL2_REG 0x0304
-#define AB4500_REGU_REQ_CTRL3_REG 0x0305
-#define AB4500_REGU_REQ_CTRL4_REG 0x0306
-#define AB4500_REGU_MISC1_REG 0x0380
-#define AB4500_REGU_OTGSUPPLY_CTRL_REG 0x0381
-#define AB4500_REGU_VUSB_CTRL_REG 0x0382
-#define AB4500_REGU_VAUDIO_SUPPLY_REG 0x0383
-#define AB4500_REGU_CTRL1_SPARE_REG 0x0384
-
-/*
- * Regu control2 Vmod register offsets
- */
-#define AB4500_REGU_VMOD_REGU_REG 0x0440
-#define AB4500_REGU_VMOD_SEL1_REG 0x0441
-#define AB4500_REGU_VMOD_SEL2_REG 0x0442
-#define AB4500_REGU_CTRL_DISCH_REG 0x0443
-#define AB4500_REGU_CTRL_DISCH2_REG 0x0444
-
-/*
- * USB/ULPI register offsets
- * Bank : 0x5
- */
-#define AB4500_USB_LINE_STAT_REG 0x0580
-#define AB4500_USB_LINE_CTRL1_REG 0x0581
-#define AB4500_USB_LINE_CTRL2_REG 0x0582
-#define AB4500_USB_LINE_CTRL3_REG 0x0583
-#define AB4500_USB_LINE_CTRL4_REG 0x0584
-#define AB4500_USB_LINE_CTRL5_REG 0x0585
-#define AB4500_USB_OTG_CTRL_REG 0x0587
-#define AB4500_USB_OTG_STAT_REG 0x0588
-#define AB4500_USB_OTG_STAT_REG 0x0588
-#define AB4500_USB_CTRL_SPARE_REG 0x0589
-#define AB4500_USB_PHY_CTRL_REG 0x058A
-
-/*
- * TVOUT / CTRL register offsets
- * Bank : 0x06
- */
-#define AB4500_TVOUT_CTRL_REG 0x0680
-
-/*
- * DBI register offsets
- * Bank : 0x07
- */
-#define AB4500_DBI_REG1_REG 0x0700
-#define AB4500_DBI_REG2_REG 0x0701
-
-/*
- * ECI regsiter offsets
- * Bank : 0x08
- */
-#define AB4500_ECI_CTRL_REG 0x0800
-#define AB4500_ECI_HOOKLEVEL_REG 0x0801
-#define AB4500_ECI_DATAOUT_REG 0x0802
-#define AB4500_ECI_DATAIN_REG 0x0803
-
-/*
- * AV Connector register offsets
- * Bank : 0x08
- */
-#define AB4500_AV_CONN_REG 0x0840
-
-/*
- * Accessory detection register offsets
- * Bank : 0x08
- */
-#define AB4500_ACC_DET_DB1_REG 0x0880
-#define AB4500_ACC_DET_DB2_REG 0x0881
-
-/*
- * GPADC register offsets
- * Bank : 0x0A
- */
-#define AB4500_GPADC_CTRL1_REG 0x0A00
-#define AB4500_GPADC_CTRL2_REG 0x0A01
-#define AB4500_GPADC_CTRL3_REG 0x0A02
-#define AB4500_GPADC_AUTO_TIMER_REG 0x0A03
-#define AB4500_GPADC_STAT_REG 0x0A04
-#define AB4500_GPADC_MANDATAL_REG 0x0A05
-#define AB4500_GPADC_MANDATAH_REG 0x0A06
-#define AB4500_GPADC_AUTODATAL_REG 0x0A07
-#define AB4500_GPADC_AUTODATAH_REG 0x0A08
-#define AB4500_GPADC_MUX_CTRL_REG 0x0A09
-
-/*
- * Charger / status register offfsets
- * Bank : 0x0B
- */
-#define AB4500_CH_STATUS1_REG 0x0B00
-#define AB4500_CH_STATUS2_REG 0x0B01
-#define AB4500_CH_USBCH_STAT1_REG 0x0B02
-#define AB4500_CH_USBCH_STAT2_REG 0x0B03
-#define AB4500_CH_FSM_STAT_REG 0x0B04
-#define AB4500_CH_STAT_REG 0x0B05
-
-/*
- * Charger / control register offfsets
- * Bank : 0x0B
- */
-#define AB4500_CH_VOLT_LVL_REG 0x0B40
-
-/*
- * Charger / main control register offfsets
- * Bank : 0x0B
- */
-#define AB4500_MCH_CTRL1 0x0B80
-#define AB4500_MCH_CTRL2 0x0B81
-#define AB4500_MCH_IPT_CURLVL_REG 0x0B82
-#define AB4500_CH_WD_REG 0x0B83
-
-/*
- * Charger / USB control register offsets
- * Bank : 0x0B
- */
-#define AB4500_USBCH_CTRL1_REG 0x0BC0
-#define AB4500_USBCH_CTRL2_REG 0x0BC1
-#define AB4500_USBCH_IPT_CRNTLVL_REG 0x0BC2
-
-/*
- * RTC bank register offsets
- * Bank : 0xF
- */
-#define AB4500_RTC_SOFF_STAT_REG 0x0F00
-#define AB4500_RTC_CC_CONF_REG 0x0F01
-#define AB4500_RTC_READ_REQ_REG 0x0F02
-#define AB4500_RTC_WATCH_TSECMID_REG 0x0F03
-#define AB4500_RTC_WATCH_TSECHI_REG 0x0F04
-#define AB4500_RTC_WATCH_TMIN_LOW_REG 0x0F05
-#define AB4500_RTC_WATCH_TMIN_MID_REG 0x0F06
-#define AB4500_RTC_WATCH_TMIN_HI_REG 0x0F07
-#define AB4500_RTC_ALRM_MIN_LOW_REG 0x0F08
-#define AB4500_RTC_ALRM_MIN_MID_REG 0x0F09
-#define AB4500_RTC_ALRM_MIN_HI_REG 0x0F0A
-#define AB4500_RTC_STAT_REG 0x0F0B
-#define AB4500_RTC_BKUP_CHG_REG 0x0F0C
-#define AB4500_RTC_FORCE_BKUP_REG 0x0F0D
-#define AB4500_RTC_CALIB_REG 0x0F0E
-#define AB4500_RTC_SWITCH_STAT_REG 0x0F0F
-
-/*
- * PWM Out generators
- * Bank: 0x10
- */
-#define AB4500_PWM_OUT_CTRL1_REG 0x1060
-#define AB4500_PWM_OUT_CTRL2_REG 0x1061
-#define AB4500_PWM_OUT_CTRL3_REG 0x1062
-#define AB4500_PWM_OUT_CTRL4_REG 0x1063
-#define AB4500_PWM_OUT_CTRL5_REG 0x1064
-#define AB4500_PWM_OUT_CTRL6_REG 0x1065
-#define AB4500_PWM_OUT_CTRL7_REG 0x1066
-
-#define AB4500_I2C_PAD_CTRL_REG 0x1067
-#define AB4500_REV_REG 0x1080
-
-/**
- * struct ab4500
- * @spi: spi device structure
- * @tx_buf: transmit buffer
- * @rx_buf: receive buffer
- * @lock: sync primitive
- */
-struct ab4500 {
- struct spi_device *spi;
- unsigned long tx_buf[4];
- unsigned long rx_buf[4];
- struct mutex lock;
-};
-
-int ab4500_write(struct ab4500 *ab4500, unsigned char block,
- unsigned long addr, unsigned char data);
-int ab4500_read(struct ab4500 *ab4500, unsigned char block,
- unsigned long addr);
-
-#endif /* MFD_AB4500_H */
diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h
new file mode 100644
index 0000000..b63ff3b
--- /dev/null
+++ b/include/linux/mfd/ab8500.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ */
+#ifndef MFD_AB8500_H
+#define MFD_AB8500_H
+
+#include <linux/device.h>
+
+/*
+ * Interrupts
+ */
+
+#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0
+#define AB8500_INT_UN_PLUG_TV_DET 1
+#define AB8500_INT_PLUG_TV_DET 2
+#define AB8500_INT_TEMP_WARM 3
+#define AB8500_INT_PON_KEY2DB_F 4
+#define AB8500_INT_PON_KEY2DB_R 5
+#define AB8500_INT_PON_KEY1DB_F 6
+#define AB8500_INT_PON_KEY1DB_R 7
+#define AB8500_INT_BATT_OVV 8
+#define AB8500_INT_MAIN_CH_UNPLUG_DET 10
+#define AB8500_INT_MAIN_CH_PLUG_DET 11
+#define AB8500_INT_USB_ID_DET_F 12
+#define AB8500_INT_USB_ID_DET_R 13
+#define AB8500_INT_VBUS_DET_F 14
+#define AB8500_INT_VBUS_DET_R 15
+#define AB8500_INT_VBUS_CH_DROP_END 16
+#define AB8500_INT_RTC_60S 17
+#define AB8500_INT_RTC_ALARM 18
+#define AB8500_INT_BAT_CTRL_INDB 20
+#define AB8500_INT_CH_WD_EXP 21
+#define AB8500_INT_VBUS_OVV 22
+#define AB8500_INT_MAIN_CH_DROP_END 23
+#define AB8500_INT_CCN_CONV_ACC 24
+#define AB8500_INT_INT_AUD 25
+#define AB8500_INT_CCEOC 26
+#define AB8500_INT_CC_INT_CALIB 27
+#define AB8500_INT_LOW_BAT_F 28
+#define AB8500_INT_LOW_BAT_R 29
+#define AB8500_INT_BUP_CHG_NOT_OK 30
+#define AB8500_INT_BUP_CHG_OK 31
+#define AB8500_INT_GP_HW_ADC_CONV_END 32
+#define AB8500_INT_ACC_DETECT_1DB_F 33
+#define AB8500_INT_ACC_DETECT_1DB_R 34
+#define AB8500_INT_ACC_DETECT_22DB_F 35
+#define AB8500_INT_ACC_DETECT_22DB_R 36
+#define AB8500_INT_ACC_DETECT_21DB_F 37
+#define AB8500_INT_ACC_DETECT_21DB_R 38
+#define AB8500_INT_GP_SW_ADC_CONV_END 39
+#define AB8500_INT_BTEMP_LOW 72
+#define AB8500_INT_BTEMP_LOW_MEDIUM 73
+#define AB8500_INT_BTEMP_MEDIUM_HIGH 74
+#define AB8500_INT_BTEMP_HIGH 75
+#define AB8500_INT_USB_CHARGER_NOT_OK 81
+#define AB8500_INT_ID_WAKEUP_R 82
+#define AB8500_INT_ID_DET_R1R 84
+#define AB8500_INT_ID_DET_R2R 85
+#define AB8500_INT_ID_DET_R3R 86
+#define AB8500_INT_ID_DET_R4R 87
+#define AB8500_INT_ID_WAKEUP_F 88
+#define AB8500_INT_ID_DET_R1F 90
+#define AB8500_INT_ID_DET_R2F 91
+#define AB8500_INT_ID_DET_R3F 92
+#define AB8500_INT_ID_DET_R4F 93
+#define AB8500_INT_USB_CHG_DET_DONE 94
+#define AB8500_INT_USB_CH_TH_PROT_F 96
+#define AB8500_INT_USB_CH_TH_PROP_R 97
+#define AB8500_INT_MAIN_CH_TH_PROP_F 98
+#define AB8500_INT_MAIN_CH_TH_PROT_R 99
+#define AB8500_INT_USB_CHARGER_NOT_OKF 103
+
+#define AB8500_NR_IRQS 104
+#define AB8500_NUM_IRQ_REGS 13
+
+/**
+ * struct ab8500 - ab8500 internal structure
+ * @dev: parent device
+ * @lock: read/write operations lock
+ * @irq_lock: genirq bus lock
+ * @revision: chip revision
+ * @irq: irq line
+ * @write: register write
+ * @read: register read
+ * @rx_buf: rx buf for SPI
+ * @tx_buf: tx buf for SPI
+ * @mask: cache of IRQ regs for bus lock
+ * @oldmask: cache of previous IRQ regs for bus lock
+ */
+struct ab8500 {
+ struct device *dev;
+ struct mutex lock;
+ struct mutex irq_lock;
+ int revision;
+ int irq_base;
+ int irq;
+
+ int (*write) (struct ab8500 *a8500, u16 addr, u8 data);
+ int (*read) (struct ab8500 *a8500, u16 addr);
+
+ unsigned long tx_buf[4];
+ unsigned long rx_buf[4];
+
+ u8 mask[AB8500_NUM_IRQ_REGS];
+ u8 oldmask[AB8500_NUM_IRQ_REGS];
+};
+
+/**
+ * struct ab8500_platform_data - AB8500 platform data
+ * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
+ * @init: board-specific initialization after detection of ab8500
+ */
+struct ab8500_platform_data {
+ int irq_base;
+ void (*init) (struct ab8500 *);
+};
+
+extern int ab8500_write(struct ab8500 *a8500, u16 addr, u8 data);
+extern int ab8500_read(struct ab8500 *a8500, u16 addr);
+extern int ab8500_set_bits(struct ab8500 *a8500, u16 addr, u8 mask, u8 data);
+
+extern int __devinit ab8500_init(struct ab8500 *ab8500);
+extern int __devexit ab8500_exit(struct ab8500 *ab8500);
+
+#endif /* MFD_AB8500_H */
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
new file mode 100644
index 0000000..390726f
--- /dev/null
+++ b/include/linux/mfd/abx500.h
@@ -0,0 +1,233 @@
+/*
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * AB3100 core access functions
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * ABX500 core access functions.
+ * The abx500 interface is used for the Analog Baseband chip
+ * ab3100, ab3550, ab5500 and possibly comming. It is not used for
+ * ab4500 and ab8500 since they are another family of chip.
+ *
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com>
+ * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
+ * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+
+#include <linux/device.h>
+#include <linux/regulator/machine.h>
+
+#ifndef MFD_ABX500_H
+#define MFD_ABX500_H
+
+#define AB3100_P1A 0xc0
+#define AB3100_P1B 0xc1
+#define AB3100_P1C 0xc2
+#define AB3100_P1D 0xc3
+#define AB3100_P1E 0xc4
+#define AB3100_P1F 0xc5
+#define AB3100_P1G 0xc6
+#define AB3100_R2A 0xc7
+#define AB3100_R2B 0xc8
+#define AB3550_P1A 0x10
+#define AB5500_1_0 0x20
+#define AB5500_2_0 0x21
+#define AB5500_2_1 0x22
+
+/*
+ * AB3100, EVENTA1, A2 and A3 event register flags
+ * these are catenated into a single 32-bit flag in the code
+ * for event notification broadcasts.
+ */
+#define AB3100_EVENTA1_ONSWA (0x01<<16)
+#define AB3100_EVENTA1_ONSWB (0x02<<16)
+#define AB3100_EVENTA1_ONSWC (0x04<<16)
+#define AB3100_EVENTA1_DCIO (0x08<<16)
+#define AB3100_EVENTA1_OVER_TEMP (0x10<<16)
+#define AB3100_EVENTA1_SIM_OFF (0x20<<16)
+#define AB3100_EVENTA1_VBUS (0x40<<16)
+#define AB3100_EVENTA1_VSET_USB (0x80<<16)
+
+#define AB3100_EVENTA2_READY_TX (0x01<<8)
+#define AB3100_EVENTA2_READY_RX (0x02<<8)
+#define AB3100_EVENTA2_OVERRUN_ERROR (0x04<<8)
+#define AB3100_EVENTA2_FRAMING_ERROR (0x08<<8)
+#define AB3100_EVENTA2_CHARG_OVERCURRENT (0x10<<8)
+#define AB3100_EVENTA2_MIDR (0x20<<8)
+#define AB3100_EVENTA2_BATTERY_REM (0x40<<8)
+#define AB3100_EVENTA2_ALARM (0x80<<8)
+
+#define AB3100_EVENTA3_ADC_TRIG5 (0x01)
+#define AB3100_EVENTA3_ADC_TRIG4 (0x02)
+#define AB3100_EVENTA3_ADC_TRIG3 (0x04)
+#define AB3100_EVENTA3_ADC_TRIG2 (0x08)
+#define AB3100_EVENTA3_ADC_TRIGVBAT (0x10)
+#define AB3100_EVENTA3_ADC_TRIGVTX (0x20)
+#define AB3100_EVENTA3_ADC_TRIG1 (0x40)
+#define AB3100_EVENTA3_ADC_TRIG0 (0x80)
+
+/* AB3100, STR register flags */
+#define AB3100_STR_ONSWA (0x01)
+#define AB3100_STR_ONSWB (0x02)
+#define AB3100_STR_ONSWC (0x04)
+#define AB3100_STR_DCIO (0x08)
+#define AB3100_STR_BOOT_MODE (0x10)
+#define AB3100_STR_SIM_OFF (0x20)
+#define AB3100_STR_BATT_REMOVAL (0x40)
+#define AB3100_STR_VBUS (0x80)
+
+/*
+ * AB3100 contains 8 regulators, one external regulator controller
+ * and a buck converter, further the LDO E and buck converter can
+ * have separate settings if they are in sleep mode, this is
+ * modeled as a separate regulator.
+ */
+#define AB3100_NUM_REGULATORS 10
+
+/**
+ * struct ab3100
+ * @access_mutex: lock out concurrent accesses to the AB3100 registers
+ * @dev: pointer to the containing device
+ * @i2c_client: I2C client for this chip
+ * @testreg_client: secondary client for test registers
+ * @chip_name: name of this chip variant
+ * @chip_id: 8 bit chip ID for this chip variant
+ * @event_subscribers: event subscribers are listed here
+ * @startup_events: a copy of the first reading of the event registers
+ * @startup_events_read: whether the first events have been read
+ *
+ * This struct is PRIVATE and devices using it should NOT
+ * access ANY fields. It is used as a token for calling the
+ * AB3100 functions.
+ */
+struct ab3100 {
+ struct mutex access_mutex;
+ struct device *dev;
+ struct i2c_client *i2c_client;
+ struct i2c_client *testreg_client;
+ char chip_name[32];
+ u8 chip_id;
+ struct blocking_notifier_head event_subscribers;
+ u8 startup_events[3];
+ bool startup_events_read;
+};
+
+/**
+ * struct ab3100_platform_data
+ * Data supplied to initialize board connections to the AB3100
+ * @reg_constraints: regulator constraints for target board
+ * the order of these constraints are: LDO A, C, D, E,
+ * F, G, H, K, EXT and BUCK.
+ * @reg_initvals: initial values for the regulator registers
+ * plus two sleep settings for LDO E and the BUCK converter.
+ * exactly AB3100_NUM_REGULATORS+2 values must be sent in.
+ * Order: LDO A, C, E, E sleep, F, G, H, K, EXT, BUCK,
+ * BUCK sleep, LDO D. (LDO D need to be initialized last.)
+ * @external_voltage: voltage level of the external regulator.
+ */
+struct ab3100_platform_data {
+ struct regulator_init_data reg_constraints[AB3100_NUM_REGULATORS];
+ u8 reg_initvals[AB3100_NUM_REGULATORS+2];
+ int external_voltage;
+};
+
+int ab3100_event_register(struct ab3100 *ab3100,
+ struct notifier_block *nb);
+int ab3100_event_unregister(struct ab3100 *ab3100,
+ struct notifier_block *nb);
+
+/* AB3550, STR register flags */
+#define AB3550_STR_ONSWA (0x01)
+#define AB3550_STR_ONSWB (0x02)
+#define AB3550_STR_ONSWC (0x04)
+#define AB3550_STR_DCIO (0x08)
+#define AB3550_STR_BOOT_MODE (0x10)
+#define AB3550_STR_SIM_OFF (0x20)
+#define AB3550_STR_BATT_REMOVAL (0x40)
+#define AB3550_STR_VBUS (0x80)
+
+/* Interrupt mask registers */
+#define AB3550_IMR1 0x29
+#define AB3550_IMR2 0x2a
+#define AB3550_IMR3 0x2b
+#define AB3550_IMR4 0x2c
+#define AB3550_IMR5 0x2d
+
+enum ab3550_devid {
+ AB3550_DEVID_ADC,
+ AB3550_DEVID_DAC,
+ AB3550_DEVID_LEDS,
+ AB3550_DEVID_POWER,
+ AB3550_DEVID_REGULATORS,
+ AB3550_DEVID_SIM,
+ AB3550_DEVID_UART,
+ AB3550_DEVID_RTC,
+ AB3550_DEVID_CHARGER,
+ AB3550_DEVID_FUELGAUGE,
+ AB3550_DEVID_VIBRATOR,
+ AB3550_DEVID_CODEC,
+ AB3550_NUM_DEVICES,
+};
+
+/**
+ * struct abx500_init_setting
+ * Initial value of the registers for driver to use during setup.
+ */
+struct abx500_init_settings {
+ u8 bank;
+ u8 reg;
+ u8 setting;
+};
+
+/**
+ * struct ab3550_platform_data
+ * Data supplied to initialize board connections to the AB3550
+ */
+struct ab3550_platform_data {
+ struct {unsigned int base; unsigned int count; } irq;
+ void *dev_data[AB3550_NUM_DEVICES];
+ size_t dev_data_sz[AB3550_NUM_DEVICES];
+ struct abx500_init_settings *init_settings;
+ unsigned int init_settings_sz;
+};
+
+int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
+ u8 value);
+int abx500_get_register_interruptible(struct device *dev, u8 bank, u8 reg,
+ u8 *value);
+int abx500_get_register_page_interruptible(struct device *dev, u8 bank,
+ u8 first_reg, u8 *regvals, u8 numregs);
+int abx500_set_register_page_interruptible(struct device *dev, u8 bank,
+ u8 first_reg, u8 *regvals, u8 numregs);
+/**
+ * abx500_mask_and_set_register_inerruptible() - Modifies selected bits of a
+ * target register
+ *
+ * @dev: The AB sub device.
+ * @bank: The i2c bank number.
+ * @bitmask: The bit mask to use.
+ * @bitvalues: The new bit values.
+ *
+ * Updates the value of an AB register:
+ * value -> ((value & ~bitmask) | (bitvalues & bitmask))
+ */
+int abx500_mask_and_set_register_interruptible(struct device *dev, u8 bank,
+ u8 reg, u8 bitmask, u8 bitvalues);
+int abx500_get_chip_id(struct device *dev);
+int abx500_event_registers_startup_state_get(struct device *dev, u8 *event);
+int abx500_startup_irq_enabled(struct device *dev, unsigned int irq);
+
+struct abx500_ops {
+ int (*get_chip_id) (struct device *);
+ int (*get_register) (struct device *, u8, u8, u8 *);
+ int (*set_register) (struct device *, u8, u8, u8);
+ int (*get_register_page) (struct device *, u8, u8, u8 *, u8);
+ int (*set_register_page) (struct device *, u8, u8, u8 *, u8);
+ int (*mask_and_set_register) (struct device *, u8, u8, u8, u8);
+ int (*event_registers_startup_state_get) (struct device *, u8 *);
+ int (*startup_irq_enabled) (struct device *, unsigned int);
+};
+
+int abx500_register_ops(struct device *core_dev, struct abx500_ops *ops);
+#endif
diff --git a/include/linux/mfd/janz.h b/include/linux/mfd/janz.h
new file mode 100644
index 0000000..e9994c4
--- /dev/null
+++ b/include/linux/mfd/janz.h
@@ -0,0 +1,54 @@
+/*
+ * Common Definitions for Janz MODULbus devices
+ *
+ * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef JANZ_H
+#define JANZ_H
+
+struct janz_platform_data {
+ /* MODULbus Module Number */
+ unsigned int modno;
+};
+
+/* PLX bridge chip onboard registers */
+struct janz_cmodio_onboard_regs {
+ u8 unused1;
+
+ /*
+ * Read access: interrupt status
+ * Write access: interrupt disable
+ */
+ u8 int_disable;
+ u8 unused2;
+
+ /*
+ * Read access: MODULbus number (hex switch)
+ * Write access: interrupt enable
+ */
+ u8 int_enable;
+ u8 unused3;
+
+ /* write-only */
+ u8 reset_assert;
+ u8 unused4;
+
+ /* write-only */
+ u8 reset_deassert;
+ u8 unused5;
+
+ /* read-write access to serial EEPROM */
+ u8 eep;
+ u8 unused6;
+
+ /* write-only access to EEPROM chip select */
+ u8 enid;
+};
+
+#endif /* JANZ_H */
diff --git a/include/linux/mfd/mc13783.h b/include/linux/mfd/mc13783.h
index 8895d9d..4a894f6 100644
--- a/include/linux/mfd/mc13783.h
+++ b/include/linux/mfd/mc13783.h
@@ -64,6 +64,70 @@
MC13783_ADC0_TSMOD1 | \
MC13783_ADC0_TSMOD2)
+struct mc13783_led_platform_data {
+#define MC13783_LED_MD 0
+#define MC13783_LED_AD 1
+#define MC13783_LED_KP 2
+#define MC13783_LED_R1 3
+#define MC13783_LED_G1 4
+#define MC13783_LED_B1 5
+#define MC13783_LED_R2 6
+#define MC13783_LED_G2 7
+#define MC13783_LED_B2 8
+#define MC13783_LED_R3 9
+#define MC13783_LED_G3 10
+#define MC13783_LED_B3 11
+#define MC13783_LED_MAX MC13783_LED_B3
+ int id;
+ const char *name;
+ const char *default_trigger;
+
+/* Three or two bits current selection depending on the led */
+ char max_current;
+};
+
+struct mc13783_leds_platform_data {
+ int num_leds;
+ struct mc13783_led_platform_data *led;
+
+#define MC13783_LED_TRIODE_MD (1 << 0)
+#define MC13783_LED_TRIODE_AD (1 << 1)
+#define MC13783_LED_TRIODE_KP (1 << 2)
+#define MC13783_LED_BOOST_EN (1 << 3)
+#define MC13783_LED_TC1HALF (1 << 4)
+#define MC13783_LED_SLEWLIMTC (1 << 5)
+#define MC13783_LED_SLEWLIMBL (1 << 6)
+#define MC13783_LED_TRIODE_TC1 (1 << 7)
+#define MC13783_LED_TRIODE_TC2 (1 << 8)
+#define MC13783_LED_TRIODE_TC3 (1 << 9)
+ int flags;
+
+#define MC13783_LED_AB_DISABLED 0
+#define MC13783_LED_AB_MD1 1
+#define MC13783_LED_AB_MD12 2
+#define MC13783_LED_AB_MD123 3
+#define MC13783_LED_AB_MD1234 4
+#define MC13783_LED_AB_MD1234_AD1 5
+#define MC13783_LED_AB_MD1234_AD12 6
+#define MC13783_LED_AB_MD1_AD 7
+ char abmode;
+
+#define MC13783_LED_ABREF_200MV 0
+#define MC13783_LED_ABREF_400MV 1
+#define MC13783_LED_ABREF_600MV 2
+#define MC13783_LED_ABREF_800MV 3
+ char abref;
+
+#define MC13783_LED_PERIOD_10MS 0
+#define MC13783_LED_PERIOD_100MS 1
+#define MC13783_LED_PERIOD_500MS 2
+#define MC13783_LED_PERIOD_2S 3
+ char bl_period;
+ char tc1_period;
+ char tc2_period;
+ char tc3_period;
+};
+
/* to be cleaned up */
struct regulator_init_data;
@@ -80,12 +144,14 @@
struct mc13783_platform_data {
int num_regulators;
struct mc13783_regulator_init_data *regulators;
+ struct mc13783_leds_platform_data *leds;
#define MC13783_USE_TOUCHSCREEN (1 << 0)
#define MC13783_USE_CODEC (1 << 1)
#define MC13783_USE_ADC (1 << 2)
#define MC13783_USE_RTC (1 << 3)
#define MC13783_USE_REGULATOR (1 << 4)
+#define MC13783_USE_LED (1 << 5)
unsigned int flags;
};
diff --git a/include/linux/mfd/pcf50633/backlight.h b/include/linux/mfd/pcf50633/backlight.h
new file mode 100644
index 0000000..83747e2
--- /dev/null
+++ b/include/linux/mfd/pcf50633/backlight.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ * PCF50633 backlight device driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __LINUX_MFD_PCF50633_BACKLIGHT
+#define __LINUX_MFD_PCF50633_BACKLIGHT
+
+/*
+* @default_brightness: Backlight brightness is initialized to this value
+*
+* Brightness to be used after the driver has been probed.
+* Valid range 0-63.
+*
+* @default_brightness_limit: The actual brightness is limited by this value
+*
+* Brightness limit to be used after the driver has been probed. This is useful
+* when it is not known how much power is available for the backlight during
+* probe.
+* Valid range 0-63. Can be changed later with pcf50633_bl_set_brightness_limit.
+*
+* @ramp_time: Display ramp time when changing brightness
+*
+* When changing the backlights brightness the change is not instant, instead
+* it fades smooth from one state to another. This value specifies how long
+* the fade should take. The lower the value the higher the fade time.
+* Valid range 0-255
+*/
+struct pcf50633_bl_platform_data {
+ unsigned int default_brightness;
+ unsigned int default_brightness_limit;
+ uint8_t ramp_time;
+};
+
+
+struct pcf50633;
+
+int pcf50633_bl_set_brightness_limit(struct pcf50633 *pcf, unsigned int limit);
+
+#endif
+
diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h
index 3398bd9..ad411a7 100644
--- a/include/linux/mfd/pcf50633/core.h
+++ b/include/linux/mfd/pcf50633/core.h
@@ -18,6 +18,7 @@
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/power_supply.h>
+#include <linux/mfd/pcf50633/backlight.h>
struct pcf50633;
@@ -43,6 +44,8 @@
void (*force_shutdown)(struct pcf50633 *);
u8 resumers[5];
+
+ struct pcf50633_bl_platform_data *backlight_data;
};
struct pcf50633_irq {
@@ -152,6 +155,7 @@
struct platform_device *mbc_pdev;
struct platform_device *adc_pdev;
struct platform_device *input_pdev;
+ struct platform_device *bl_pdev;
struct platform_device *regulator_pdev[PCF50633_NUM_REGULATORS];
};
diff --git a/include/linux/mfd/rdc321x.h b/include/linux/mfd/rdc321x.h
new file mode 100644
index 0000000..4bdf19c
--- /dev/null
+++ b/include/linux/mfd/rdc321x.h
@@ -0,0 +1,26 @@
+#ifndef __RDC321X_MFD_H
+#define __RDC321X_MFD_H
+
+#include <linux/types.h>
+#include <linux/pci.h>
+
+/* Offsets to be accessed in the southbridge PCI
+ * device configuration register */
+#define RDC321X_WDT_CTRL 0x44
+#define RDC321X_GPIO_CTRL_REG1 0x48
+#define RDC321X_GPIO_DATA_REG1 0x4c
+#define RDC321X_GPIO_CTRL_REG2 0x84
+#define RDC321X_GPIO_DATA_REG2 0x88
+
+#define RDC321X_MAX_GPIO 58
+
+struct rdc321x_gpio_pdata {
+ struct pci_dev *sb_pdev;
+ unsigned max_gpios;
+};
+
+struct rdc321x_wdt_pdata {
+ struct pci_dev *sb_pdev;
+};
+
+#endif /* __RDC321X_MFD_H */
diff --git a/include/linux/mfd/tc35892.h b/include/linux/mfd/tc35892.h
new file mode 100644
index 0000000..e47f770
--- /dev/null
+++ b/include/linux/mfd/tc35892.h
@@ -0,0 +1,132 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ */
+
+#ifndef __LINUX_MFD_TC35892_H
+#define __LINUX_MFD_TC35892_H
+
+#include <linux/device.h>
+
+#define TC35892_RSTCTRL_IRQRST (1 << 4)
+#define TC35892_RSTCTRL_TIMRST (1 << 3)
+#define TC35892_RSTCTRL_ROTRST (1 << 2)
+#define TC35892_RSTCTRL_KBDRST (1 << 1)
+#define TC35892_RSTCTRL_GPIRST (1 << 0)
+
+#define TC35892_IRQST 0x91
+
+#define TC35892_MANFCODE_MAGIC 0x03
+#define TC35892_MANFCODE 0x80
+#define TC35892_VERSION 0x81
+#define TC35892_IOCFG 0xA7
+
+#define TC35892_CLKMODE 0x88
+#define TC35892_CLKCFG 0x89
+#define TC35892_CLKEN 0x8A
+
+#define TC35892_RSTCTRL 0x82
+#define TC35892_EXTRSTN 0x83
+#define TC35892_RSTINTCLR 0x84
+
+#define TC35892_GPIOIS0 0xC9
+#define TC35892_GPIOIS1 0xCA
+#define TC35892_GPIOIS2 0xCB
+#define TC35892_GPIOIBE0 0xCC
+#define TC35892_GPIOIBE1 0xCD
+#define TC35892_GPIOIBE2 0xCE
+#define TC35892_GPIOIEV0 0xCF
+#define TC35892_GPIOIEV1 0xD0
+#define TC35892_GPIOIEV2 0xD1
+#define TC35892_GPIOIE0 0xD2
+#define TC35892_GPIOIE1 0xD3
+#define TC35892_GPIOIE2 0xD4
+#define TC35892_GPIORIS0 0xD6
+#define TC35892_GPIORIS1 0xD7
+#define TC35892_GPIORIS2 0xD8
+#define TC35892_GPIOMIS0 0xD9
+#define TC35892_GPIOMIS1 0xDA
+#define TC35892_GPIOMIS2 0xDB
+#define TC35892_GPIOIC0 0xDC
+#define TC35892_GPIOIC1 0xDD
+#define TC35892_GPIOIC2 0xDE
+
+#define TC35892_GPIODATA0 0xC0
+#define TC35892_GPIOMASK0 0xc1
+#define TC35892_GPIODATA1 0xC2
+#define TC35892_GPIOMASK1 0xc3
+#define TC35892_GPIODATA2 0xC4
+#define TC35892_GPIOMASK2 0xC5
+
+#define TC35892_GPIODIR0 0xC6
+#define TC35892_GPIODIR1 0xC7
+#define TC35892_GPIODIR2 0xC8
+
+#define TC35892_GPIOSYNC0 0xE6
+#define TC35892_GPIOSYNC1 0xE7
+#define TC35892_GPIOSYNC2 0xE8
+
+#define TC35892_GPIOWAKE0 0xE9
+#define TC35892_GPIOWAKE1 0xEA
+#define TC35892_GPIOWAKE2 0xEB
+
+#define TC35892_GPIOODM0 0xE0
+#define TC35892_GPIOODE0 0xE1
+#define TC35892_GPIOODM1 0xE2
+#define TC35892_GPIOODE1 0xE3
+#define TC35892_GPIOODM2 0xE4
+#define TC35892_GPIOODE2 0xE5
+
+#define TC35892_INT_GPIIRQ 0
+#define TC35892_INT_TI0IRQ 1
+#define TC35892_INT_TI1IRQ 2
+#define TC35892_INT_TI2IRQ 3
+#define TC35892_INT_ROTIRQ 5
+#define TC35892_INT_KBDIRQ 6
+#define TC35892_INT_PORIRQ 7
+
+#define TC35892_NR_INTERNAL_IRQS 8
+#define TC35892_INT_GPIO(x) (TC35892_NR_INTERNAL_IRQS + (x))
+
+struct tc35892 {
+ struct mutex lock;
+ struct device *dev;
+ struct i2c_client *i2c;
+
+ int irq_base;
+ int num_gpio;
+ struct tc35892_platform_data *pdata;
+};
+
+extern int tc35892_reg_write(struct tc35892 *tc35892, u8 reg, u8 data);
+extern int tc35892_reg_read(struct tc35892 *tc35892, u8 reg);
+extern int tc35892_block_read(struct tc35892 *tc35892, u8 reg, u8 length,
+ u8 *values);
+extern int tc35892_block_write(struct tc35892 *tc35892, u8 reg, u8 length,
+ const u8 *values);
+extern int tc35892_set_bits(struct tc35892 *tc35892, u8 reg, u8 mask, u8 val);
+
+/**
+ * struct tc35892_gpio_platform_data - TC35892 GPIO platform data
+ * @gpio_base: first gpio number assigned to TC35892. A maximum of
+ * %TC35892_NR_GPIOS GPIOs will be allocated.
+ */
+struct tc35892_gpio_platform_data {
+ int gpio_base;
+};
+
+/**
+ * struct tc35892_platform_data - TC35892 platform data
+ * @irq_base: base IRQ number. %TC35892_NR_IRQS irqs will be used.
+ * @gpio: GPIO-specific platform data
+ */
+struct tc35892_platform_data {
+ int irq_base;
+ struct tc35892_gpio_platform_data *gpio;
+};
+
+#define TC35892_NR_GPIOS 24
+#define TC35892_NR_IRQS TC35892_INT_GPIO(TC35892_NR_GPIOS)
+
+#endif
diff --git a/include/linux/mfd/tps6507x.h b/include/linux/mfd/tps6507x.h
new file mode 100644
index 0000000..c923e48
--- /dev/null
+++ b/include/linux/mfd/tps6507x.h
@@ -0,0 +1,169 @@
+/* linux/mfd/tps6507x.h
+ *
+ * Functions to access TPS65070 power management chip.
+ *
+ * Copyright (c) 2009 RidgeRun (todd.fischer@ridgerun.com)
+ *
+ *
+ * For licencing details see kernel-base/COPYING
+ */
+
+#ifndef __LINUX_MFD_TPS6507X_H
+#define __LINUX_MFD_TPS6507X_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Registers, all 8 bits
+ * ----------------------------------------------------------------------------
+ */
+
+
+/* Register definitions */
+#define TPS6507X_REG_PPATH1 0X01
+#define TPS6507X_CHG_USB BIT(7)
+#define TPS6507X_CHG_AC BIT(6)
+#define TPS6507X_CHG_USB_PW_ENABLE BIT(5)
+#define TPS6507X_CHG_AC_PW_ENABLE BIT(4)
+#define TPS6507X_CHG_AC_CURRENT BIT(2)
+#define TPS6507X_CHG_USB_CURRENT BIT(0)
+
+#define TPS6507X_REG_INT 0X02
+#define TPS6507X_REG_MASK_AC_USB BIT(7)
+#define TPS6507X_REG_MASK_TSC BIT(6)
+#define TPS6507X_REG_MASK_PB_IN BIT(5)
+#define TPS6507X_REG_TSC_INT BIT(3)
+#define TPS6507X_REG_PB_IN_INT BIT(2)
+#define TPS6507X_REG_AC_USB_APPLIED BIT(1)
+#define TPS6507X_REG_AC_USB_REMOVED BIT(0)
+
+#define TPS6507X_REG_CHGCONFIG0 0X03
+
+#define TPS6507X_REG_CHGCONFIG1 0X04
+#define TPS6507X_CON_CTRL1_DCDC1_ENABLE BIT(4)
+#define TPS6507X_CON_CTRL1_DCDC2_ENABLE BIT(3)
+#define TPS6507X_CON_CTRL1_DCDC3_ENABLE BIT(2)
+#define TPS6507X_CON_CTRL1_LDO1_ENABLE BIT(1)
+#define TPS6507X_CON_CTRL1_LDO2_ENABLE BIT(0)
+
+#define TPS6507X_REG_CHGCONFIG2 0X05
+
+#define TPS6507X_REG_CHGCONFIG3 0X06
+
+#define TPS6507X_REG_ADCONFIG 0X07
+#define TPS6507X_ADCONFIG_AD_ENABLE BIT(7)
+#define TPS6507X_ADCONFIG_START_CONVERSION BIT(6)
+#define TPS6507X_ADCONFIG_CONVERSION_DONE BIT(5)
+#define TPS6507X_ADCONFIG_VREF_ENABLE BIT(4)
+#define TPS6507X_ADCONFIG_INPUT_AD_IN1 0
+#define TPS6507X_ADCONFIG_INPUT_AD_IN2 1
+#define TPS6507X_ADCONFIG_INPUT_AD_IN3 2
+#define TPS6507X_ADCONFIG_INPUT_AD_IN4 3
+#define TPS6507X_ADCONFIG_INPUT_TS_PIN 4
+#define TPS6507X_ADCONFIG_INPUT_BAT_CURRENT 5
+#define TPS6507X_ADCONFIG_INPUT_AC_VOLTAGE 6
+#define TPS6507X_ADCONFIG_INPUT_SYS_VOLTAGE 7
+#define TPS6507X_ADCONFIG_INPUT_CHARGER_VOLTAGE 8
+#define TPS6507X_ADCONFIG_INPUT_BAT_VOLTAGE 9
+#define TPS6507X_ADCONFIG_INPUT_THRESHOLD_VOLTAGE 10
+#define TPS6507X_ADCONFIG_INPUT_ISET1_VOLTAGE 11
+#define TPS6507X_ADCONFIG_INPUT_ISET2_VOLTAGE 12
+#define TPS6507X_ADCONFIG_INPUT_REAL_TSC 14
+#define TPS6507X_ADCONFIG_INPUT_TSC 15
+
+#define TPS6507X_REG_TSCMODE 0X08
+#define TPS6507X_TSCMODE_X_POSITION 0
+#define TPS6507X_TSCMODE_Y_POSITION 1
+#define TPS6507X_TSCMODE_PRESSURE 2
+#define TPS6507X_TSCMODE_X_PLATE 3
+#define TPS6507X_TSCMODE_Y_PLATE 4
+#define TPS6507X_TSCMODE_STANDBY 5
+#define TPS6507X_TSCMODE_ADC_INPUT 6
+#define TPS6507X_TSCMODE_DISABLE 7
+
+#define TPS6507X_REG_ADRESULT_1 0X09
+
+#define TPS6507X_REG_ADRESULT_2 0X0A
+#define TPS6507X_REG_ADRESULT_2_MASK (BIT(1) | BIT(0))
+
+#define TPS6507X_REG_PGOOD 0X0B
+
+#define TPS6507X_REG_PGOODMASK 0X0C
+
+#define TPS6507X_REG_CON_CTRL1 0X0D
+#define TPS6507X_CON_CTRL1_DCDC1_ENABLE BIT(4)
+#define TPS6507X_CON_CTRL1_DCDC2_ENABLE BIT(3)
+#define TPS6507X_CON_CTRL1_DCDC3_ENABLE BIT(2)
+#define TPS6507X_CON_CTRL1_LDO1_ENABLE BIT(1)
+#define TPS6507X_CON_CTRL1_LDO2_ENABLE BIT(0)
+
+#define TPS6507X_REG_CON_CTRL2 0X0E
+
+#define TPS6507X_REG_CON_CTRL3 0X0F
+
+#define TPS6507X_REG_DEFDCDC1 0X10
+#define TPS6507X_DEFDCDC1_DCDC1_EXT_ADJ_EN BIT(7)
+#define TPS6507X_DEFDCDC1_DCDC1_MASK 0X3F
+
+#define TPS6507X_REG_DEFDCDC2_LOW 0X11
+#define TPS6507X_DEFDCDC2_LOW_DCDC2_MASK 0X3F
+
+#define TPS6507X_REG_DEFDCDC2_HIGH 0X12
+#define TPS6507X_DEFDCDC2_HIGH_DCDC2_MASK 0X3F
+
+#define TPS6507X_REG_DEFDCDC3_LOW 0X13
+#define TPS6507X_DEFDCDC3_LOW_DCDC3_MASK 0X3F
+
+#define TPS6507X_REG_DEFDCDC3_HIGH 0X14
+#define TPS6507X_DEFDCDC3_HIGH_DCDC3_MASK 0X3F
+
+#define TPS6507X_REG_DEFSLEW 0X15
+
+#define TPS6507X_REG_LDO_CTRL1 0X16
+#define TPS6507X_REG_LDO_CTRL1_LDO1_MASK 0X0F
+
+#define TPS6507X_REG_DEFLDO2 0X17
+#define TPS6507X_REG_DEFLDO2_LDO2_MASK 0X3F
+
+#define TPS6507X_REG_WLED_CTRL1 0X18
+
+#define TPS6507X_REG_WLED_CTRL2 0X19
+
+/* VDCDC MASK */
+#define TPS6507X_DEFDCDCX_DCDC_MASK 0X3F
+
+#define TPS6507X_MAX_REGISTER 0X19
+
+/**
+ * struct tps6507x_board - packages regulator and touchscreen init data
+ * @tps6507x_regulator_data: regulator initialization values
+ *
+ * Board data may be used to initialize regulator and touchscreen.
+ */
+
+struct tps6507x_board {
+ struct regulator_init_data *tps6507x_pmic_init_data;
+ struct touchscreen_init_data *tps6507x_ts_init_data;
+};
+
+/**
+ * struct tps6507x_dev - tps6507x sub-driver chip access routines
+ * @read_dev() - I2C register read function
+ * @write_dev() - I2C register write function
+ *
+ * Device data may be used to access the TPS6507x chip
+ */
+
+struct tps6507x_dev {
+ struct device *dev;
+ struct i2c_client *i2c_client;
+ int (*read_dev)(struct tps6507x_dev *tps6507x, char reg, int size,
+ void *dest);
+ int (*write_dev)(struct tps6507x_dev *tps6507x, char reg, int size,
+ void *src);
+
+ /* Client devices */
+ struct tps6507x_pmic *pmic;
+ struct tps6507x_ts *ts;
+};
+
+#endif /* __LINUX_MFD_TPS6507X_H */
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index 5915f6e..eb5bd4e 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -256,8 +256,9 @@
int irq_masks_cache[WM831X_NUM_IRQ_REGS]; /* Cached hardware value */
/* Chip revision based flags */
- unsigned has_gpio_ena:1; /* Has GPIO enable bit */
- unsigned has_cs_sts:1; /* Has current sink status bit */
+ unsigned has_gpio_ena:1; /* Has GPIO enable bit */
+ unsigned has_cs_sts:1; /* Has current sink status bit */
+ unsigned charger_irq_wake:1; /* Are charger IRQs a wake source? */
int num_gpio;
diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h
index b631c46..f6c9b7d 100644
--- a/include/linux/miscdevice.h
+++ b/include/linux/miscdevice.h
@@ -3,6 +3,12 @@
#include <linux/module.h>
#include <linux/major.h>
+/*
+ * These allocations are managed by device@lanana.org. If you use an
+ * entry that is not in assigned your entry may well be moved and
+ * reassigned, or set dynamic if a fixed value is not justified.
+ */
+
#define PSMOUSE_MINOR 1
#define MS_BUSMOUSE_MINOR 2
#define ATIXL_BUSMOUSE_MINOR 3
@@ -30,7 +36,6 @@
#define HPET_MINOR 228
#define FUSE_MINOR 229
#define KVM_MINOR 232
-#define VHOST_NET_MINOR 233
#define BTRFS_MINOR 234
#define AUTOFS_MINOR 235
#define MISC_DYNAMIC_MINOR 255
diff --git a/include/linux/mm.h b/include/linux/mm.h
index b969efb..a2b4804 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -999,7 +999,7 @@
* querying the cache size, so a fastpath for that case is appropriate.
*/
struct shrinker {
- int (*shrink)(int nr_to_scan, gfp_t gfp_mask);
+ int (*shrink)(struct shrinker *, int nr_to_scan, gfp_t gfp_mask);
int seeks; /* seeks to recreate an obj */
/* These are for internal use */
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 3196c84..f65913c 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -230,7 +230,7 @@
#define mmc_classdev(x) (&(x)->class_dev)
#define mmc_hostname(x) (dev_name(&(x)->class_dev))
-extern int mmc_suspend_host(struct mmc_host *, pm_message_t);
+extern int mmc_suspend_host(struct mmc_host *);
extern int mmc_resume_host(struct mmc_host *);
extern void mmc_power_save_host(struct mmc_host *host);
diff --git a/include/linux/mmc/sdhci-spear.h b/include/linux/mmc/sdhci-spear.h
new file mode 100644
index 0000000..9188c97
--- /dev/null
+++ b/include/linux/mmc/sdhci-spear.h
@@ -0,0 +1,42 @@
+/*
+ * include/linux/mmc/sdhci-spear.h
+ *
+ * SDHCI declarations specific to ST SPEAr platform
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef MMC_SDHCI_SPEAR_H
+#define MMC_SDHCI_SPEAR_H
+
+#include <linux/platform_device.h>
+/*
+ * struct sdhci_plat_data: spear sdhci platform data structure
+ *
+ * @card_power_gpio: gpio pin for enabling/disabling power to sdhci socket
+ * @power_active_high: if set, enable power to sdhci socket by setting
+ * card_power_gpio
+ * @power_always_enb: If set, then enable power on probe, otherwise enable only
+ * on card insertion and disable on card removal.
+ * card_int_gpio: gpio pin used for card detection
+ */
+struct sdhci_plat_data {
+ int card_power_gpio;
+ int power_active_high;
+ int power_always_enb;
+ int card_int_gpio;
+};
+
+/* This function is used to set platform_data field of pdev->dev */
+static inline void
+sdhci_set_plat_data(struct platform_device *pdev, struct sdhci_plat_data *data)
+{
+ pdev->dev.platform_data = data;
+}
+
+#endif /* MMC_SDHCI_SPEAR_H */
diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h
index c6c0cce..31baaf8 100644
--- a/include/linux/mmc/sdio_func.h
+++ b/include/linux/mmc/sdio_func.h
@@ -145,6 +145,9 @@
extern void sdio_writel(struct sdio_func *func, u32 b,
unsigned int addr, int *err_ret);
+extern u8 sdio_writeb_readb(struct sdio_func *func, u8 write_byte,
+ unsigned int addr, int *err_ret);
+
extern int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr,
void *src, int count);
extern int sdio_writesb(struct sdio_func *func, unsigned int addr,
diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h
new file mode 100644
index 0000000..d4a2ebb
--- /dev/null
+++ b/include/linux/mmc/sh_mmcif.h
@@ -0,0 +1,200 @@
+/*
+ * include/linux/mmc/sh_mmcif.h
+ *
+ * platform data for eMMC driver
+ *
+ * Copyright (C) 2010 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ */
+
+#ifndef __SH_MMCIF_H__
+#define __SH_MMCIF_H__
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+/*
+ * MMCIF : CE_CLK_CTRL [19:16]
+ * 1000 : Peripheral clock / 512
+ * 0111 : Peripheral clock / 256
+ * 0110 : Peripheral clock / 128
+ * 0101 : Peripheral clock / 64
+ * 0100 : Peripheral clock / 32
+ * 0011 : Peripheral clock / 16
+ * 0010 : Peripheral clock / 8
+ * 0001 : Peripheral clock / 4
+ * 0000 : Peripheral clock / 2
+ * 1111 : Peripheral clock (sup_pclk set '1')
+ */
+
+struct sh_mmcif_plat_data {
+ void (*set_pwr)(struct platform_device *pdev, int state);
+ void (*down_pwr)(struct platform_device *pdev);
+ u8 sup_pclk; /* 1 :SH7757, 0: SH7724/SH7372 */
+ unsigned long caps;
+ u32 ocr;
+};
+
+#define MMCIF_CE_CMD_SET 0x00000000
+#define MMCIF_CE_ARG 0x00000008
+#define MMCIF_CE_ARG_CMD12 0x0000000C
+#define MMCIF_CE_CMD_CTRL 0x00000010
+#define MMCIF_CE_BLOCK_SET 0x00000014
+#define MMCIF_CE_CLK_CTRL 0x00000018
+#define MMCIF_CE_BUF_ACC 0x0000001C
+#define MMCIF_CE_RESP3 0x00000020
+#define MMCIF_CE_RESP2 0x00000024
+#define MMCIF_CE_RESP1 0x00000028
+#define MMCIF_CE_RESP0 0x0000002C
+#define MMCIF_CE_RESP_CMD12 0x00000030
+#define MMCIF_CE_DATA 0x00000034
+#define MMCIF_CE_INT 0x00000040
+#define MMCIF_CE_INT_MASK 0x00000044
+#define MMCIF_CE_HOST_STS1 0x00000048
+#define MMCIF_CE_HOST_STS2 0x0000004C
+#define MMCIF_CE_VERSION 0x0000007C
+
+extern inline u32 sh_mmcif_readl(void __iomem *addr, int reg)
+{
+ return readl(addr + reg);
+}
+
+extern inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val)
+{
+ writel(val, addr + reg);
+}
+
+#define SH_MMCIF_BBS 512 /* boot block size */
+
+extern inline void sh_mmcif_boot_cmd_send(void __iomem *base,
+ unsigned long cmd, unsigned long arg)
+{
+ sh_mmcif_writel(base, MMCIF_CE_INT, 0);
+ sh_mmcif_writel(base, MMCIF_CE_ARG, arg);
+ sh_mmcif_writel(base, MMCIF_CE_CMD_SET, cmd);
+}
+
+extern inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask)
+{
+ unsigned long tmp;
+ int cnt;
+
+ for (cnt = 0; cnt < 1000000; cnt++) {
+ tmp = sh_mmcif_readl(base, MMCIF_CE_INT);
+ if (tmp & mask) {
+ sh_mmcif_writel(base, MMCIF_CE_INT, tmp & ~mask);
+ return 0;
+ }
+ }
+
+ return -1;
+}
+
+extern inline int sh_mmcif_boot_cmd(void __iomem *base,
+ unsigned long cmd, unsigned long arg)
+{
+ sh_mmcif_boot_cmd_send(base, cmd, arg);
+ return sh_mmcif_boot_cmd_poll(base, 0x00010000);
+}
+
+extern inline int sh_mmcif_boot_do_read_single(void __iomem *base,
+ unsigned int block_nr,
+ unsigned long *buf)
+{
+ int k;
+
+ /* CMD13 - Status */
+ sh_mmcif_boot_cmd(base, 0x0d400000, 0x00010000);
+
+ if (sh_mmcif_readl(base, MMCIF_CE_RESP0) != 0x0900)
+ return -1;
+
+ /* CMD17 - Read */
+ sh_mmcif_boot_cmd(base, 0x11480000, block_nr * SH_MMCIF_BBS);
+ if (sh_mmcif_boot_cmd_poll(base, 0x00100000) < 0)
+ return -1;
+
+ for (k = 0; k < (SH_MMCIF_BBS / 4); k++)
+ buf[k] = sh_mmcif_readl(base, MMCIF_CE_DATA);
+
+ return 0;
+}
+
+extern inline int sh_mmcif_boot_do_read(void __iomem *base,
+ unsigned long first_block,
+ unsigned long nr_blocks,
+ void *buf)
+{
+ unsigned long k;
+ int ret = 0;
+
+ /* CMD16 - Set the block size */
+ sh_mmcif_boot_cmd(base, 0x10400000, SH_MMCIF_BBS);
+
+ for (k = 0; !ret && k < nr_blocks; k++)
+ ret = sh_mmcif_boot_do_read_single(base, first_block + k,
+ buf + (k * SH_MMCIF_BBS));
+
+ return ret;
+}
+
+extern inline void sh_mmcif_boot_init(void __iomem *base)
+{
+ unsigned long tmp;
+
+ /* reset */
+ tmp = sh_mmcif_readl(base, MMCIF_CE_VERSION);
+ sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp | 0x80000000);
+ sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp & ~0x80000000);
+
+ /* byte swap */
+ sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, 0x00010000);
+
+ /* Set block size in MMCIF hardware */
+ sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS);
+
+ /* Enable the clock, set it to Bus clock/256 (about 325Khz)*/
+ sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01072fff);
+
+ /* CMD0 */
+ sh_mmcif_boot_cmd(base, 0x00000040, 0);
+
+ /* CMD1 - Get OCR */
+ do {
+ sh_mmcif_boot_cmd(base, 0x01405040, 0x40300000); /* CMD1 */
+ } while ((sh_mmcif_readl(base, MMCIF_CE_RESP0) & 0x80000000)
+ != 0x80000000);
+
+ /* CMD2 - Get CID */
+ sh_mmcif_boot_cmd(base, 0x02806040, 0);
+
+ /* CMD3 - Set card relative address */
+ sh_mmcif_boot_cmd(base, 0x03400040, 0x00010000);
+}
+
+extern inline void sh_mmcif_boot_slurp(void __iomem *base,
+ unsigned char *buf,
+ unsigned long no_bytes)
+{
+ unsigned long tmp;
+
+ /* In data transfer mode: Set clock to Bus clock/4 (about 20Mhz) */
+ sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01012fff);
+
+ /* CMD9 - Get CSD */
+ sh_mmcif_boot_cmd(base, 0x09806000, 0x00010000);
+
+ /* CMD7 - Select the card */
+ sh_mmcif_boot_cmd(base, 0x07400000, 0x00010000);
+
+ tmp = no_bytes / SH_MMCIF_BBS;
+ tmp += (no_bytes % SH_MMCIF_BBS) ? 1 : 0;
+
+ sh_mmcif_boot_do_read(base, 512, tmp, buf);
+}
+
+#endif /* __SH_MMCIF_H__ */
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 0fa4913..b4d109e 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -671,6 +671,12 @@
static inline void memory_present(int nid, unsigned long start, unsigned long end) {}
#endif
+#ifdef CONFIG_HAVE_MEMORYLESS_NODES
+int local_memory_node(int node_id);
+#else
+static inline int local_memory_node(int node_id) { return node_id; };
+#endif
+
#ifdef CONFIG_NEED_NODE_MEMMAP_SIZE
unsigned long __init node_memmap_size_bytes(int, unsigned long, unsigned long);
#endif
diff --git a/include/linux/module.h b/include/linux/module.h
index 6914fca..8a6b9fd 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -181,6 +181,13 @@
void *__symbol_get_gpl(const char *symbol);
#define symbol_get(x) ((typeof(&x))(__symbol_get(MODULE_SYMBOL_PREFIX #x)))
+/* modules using other modules: kdb wants to see this. */
+struct module_use {
+ struct list_head source_list;
+ struct list_head target_list;
+ struct module *source, *target;
+};
+
#ifndef __GENKSYMS__
#ifdef CONFIG_MODVERSIONS
/* Mark the CRC weak since genksyms apparently decides not to
@@ -359,7 +366,9 @@
#ifdef CONFIG_MODULE_UNLOAD
/* What modules depend on me? */
- struct list_head modules_which_use_me;
+ struct list_head source_list;
+ /* What modules do I depend on? */
+ struct list_head target_list;
/* Who is waiting for us to be unloaded */
struct task_struct *waiter;
@@ -663,43 +672,10 @@
#endif /* CONFIG_MODULES */
-struct device_driver;
#ifdef CONFIG_SYSFS
-struct module;
-
extern struct kset *module_kset;
extern struct kobj_type module_ktype;
extern int module_sysfs_initialized;
-
-int mod_sysfs_init(struct module *mod);
-int mod_sysfs_setup(struct module *mod,
- struct kernel_param *kparam,
- unsigned int num_params);
-int module_add_modinfo_attrs(struct module *mod);
-void module_remove_modinfo_attrs(struct module *mod);
-
-#else /* !CONFIG_SYSFS */
-
-static inline int mod_sysfs_init(struct module *mod)
-{
- return 0;
-}
-
-static inline int mod_sysfs_setup(struct module *mod,
- struct kernel_param *kparam,
- unsigned int num_params)
-{
- return 0;
-}
-
-static inline int module_add_modinfo_attrs(struct module *mod)
-{
- return 0;
-}
-
-static inline void module_remove_modinfo_attrs(struct module *mod)
-{ }
-
#endif /* CONFIG_SYSFS */
#define symbol_request(x) try_then_request_module(symbol_get(x), "symbol:" #x)
diff --git a/include/linux/mv643xx_eth.h b/include/linux/mv643xx_eth.h
index cbbbe9b..30b0c4e 100644
--- a/include/linux/mv643xx_eth.h
+++ b/include/linux/mv643xx_eth.h
@@ -19,6 +19,11 @@
struct mbus_dram_target_info *dram;
struct platform_device *shared_smi;
unsigned int t_clk;
+ /*
+ * Max packet size for Tx IP/Layer 4 checksum, when set to 0, default
+ * limit of 9KiB will be used.
+ */
+ int tx_csum_limit;
};
#define MV643XX_ETH_PHY_ADDR_DEFAULT 0
diff --git a/include/linux/net.h b/include/linux/net.h
index 2b4deee..dee0b11 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -129,10 +129,9 @@
* @type: socket type (%SOCK_STREAM, etc)
* @flags: socket flags (%SOCK_ASYNC_NOSPACE, etc)
* @ops: protocol specific socket operations
- * @fasync_list: Asynchronous wake up list
* @file: File back pointer for gc
* @sk: internal networking protocol agnostic socket representation
- * @wait: wait queue for several uses
+ * @wq: wait queue for several uses
*/
struct socket {
socket_state state;
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 40291f3..b21e405 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1656,6 +1656,9 @@
return (dev->num_tx_queues > 1);
}
+extern void netif_set_real_num_tx_queues(struct net_device *dev,
+ unsigned int txq);
+
/* Use this variant when it is known for sure that it
* is executing from hardware interrupt context or with hardware interrupts
* disabled.
@@ -2329,7 +2332,7 @@
#endif
#if defined(VERBOSE_DEBUG)
-#define netif_vdbg netdev_dbg
+#define netif_vdbg netif_dbg
#else
#define netif_vdbg(priv, type, dev, format, args...) \
({ \
diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index c00cc0c..24e5d01 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -397,7 +397,7 @@
* @stacksize jumps (number of user chains) can possibly be made.
*/
unsigned int stacksize;
- unsigned int *stackptr;
+ unsigned int __percpu *stackptr;
void ***jumpstack;
/* ipt_entry tables: one per CPU */
/* Note : this field MUST be the last one, see XT_TABLE_INFO_SZ */
diff --git a/include/linux/notifier.h b/include/linux/notifier.h
index 7c36096..540703b 100644
--- a/include/linux/notifier.h
+++ b/include/linux/notifier.h
@@ -164,7 +164,10 @@
/* Encapsulate (negative) errno value (in particular, NOTIFY_BAD <=> EPERM). */
static inline int notifier_from_errno(int err)
{
- return NOTIFY_STOP_MASK | (NOTIFY_OK - err);
+ if (err)
+ return NOTIFY_STOP_MASK | (NOTIFY_OK - err);
+
+ return NOTIFY_OK;
}
/* Restore (negative) errno value from notify return value. */
diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h
index aef22ae..5bb13b3 100644
--- a/include/linux/page_cgroup.h
+++ b/include/linux/page_cgroup.h
@@ -40,6 +40,7 @@
PCG_USED, /* this object is in use. */
PCG_ACCT_LRU, /* page has been accounted for */
PCG_FILE_MAPPED, /* page is accounted as "mapped" */
+ PCG_MIGRATION, /* under page migration */
};
#define TESTPCGFLAG(uname, lname) \
@@ -79,6 +80,10 @@
CLEARPCGFLAG(FileMapped, FILE_MAPPED)
TESTPCGFLAG(FileMapped, FILE_MAPPED)
+SETPCGFLAG(Migration, MIGRATION)
+CLEARPCGFLAG(Migration, MIGRATION)
+TESTPCGFLAG(Migration, MIGRATION)
+
static inline int page_cgroup_nid(struct page_cgroup *pc)
{
return page_to_nid(pc->page);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index a327322..f26fda7 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -288,6 +288,7 @@
*/
unsigned int irq;
struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */
+ resource_size_t fw_addr[DEVICE_COUNT_RESOURCE]; /* FW-assigned addr */
/* These fields are used by common fixups */
unsigned int transparent:1; /* Transparent PCI bridge */
@@ -311,7 +312,8 @@
unsigned int is_virtfn:1;
unsigned int reset_fn:1;
unsigned int is_hotplug_bridge:1;
- unsigned int aer_firmware_first:1;
+ unsigned int __aer_firmware_first_valid:1;
+ unsigned int __aer_firmware_first:1;
pci_dev_flags_t dev_flags;
atomic_t enable_cnt; /* pci_enable_device has been called */
@@ -631,6 +633,7 @@
/* Generic PCI functions used internally */
+void pcibios_scan_specific_bus(int busn);
extern struct pci_bus *pci_find_bus(int domain, int busnr);
void pci_bus_add_devices(const struct pci_bus *bus);
struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus,
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index ae66851..3bedcc1 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1261,6 +1261,7 @@
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE 0x0759
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_SMBUS 0x07D8
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP79_SMBUS 0x0AA2
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA 0x0D85
#define PCI_VENDOR_ID_IMS 0x10e0
#define PCI_DEVICE_ID_IMS_TT128 0x9128
@@ -2321,6 +2322,7 @@
#define PCI_VENDOR_ID_JMICRON 0x197B
#define PCI_DEVICE_ID_JMICRON_JMB360 0x2360
#define PCI_DEVICE_ID_JMICRON_JMB361 0x2361
+#define PCI_DEVICE_ID_JMICRON_JMB362 0x2362
#define PCI_DEVICE_ID_JMICRON_JMB363 0x2363
#define PCI_DEVICE_ID_JMICRON_JMB365 0x2365
#define PCI_DEVICE_ID_JMICRON_JMB366 0x2366
@@ -2532,11 +2534,63 @@
#define PCI_DEVICE_ID_INTEL_ICH9_6 0x2930
#define PCI_DEVICE_ID_INTEL_ICH9_7 0x2916
#define PCI_DEVICE_ID_INTEL_ICH9_8 0x2918
+#define PCI_DEVICE_ID_INTEL_I7_MCR 0x2c18
+#define PCI_DEVICE_ID_INTEL_I7_MC_TAD 0x2c19
+#define PCI_DEVICE_ID_INTEL_I7_MC_RAS 0x2c1a
+#define PCI_DEVICE_ID_INTEL_I7_MC_TEST 0x2c1c
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_CTRL 0x2c20
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_ADDR 0x2c21
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_RANK 0x2c22
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_TC 0x2c23
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_CTRL 0x2c28
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_ADDR 0x2c29
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_RANK 0x2c2a
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_TC 0x2c2b
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_CTRL 0x2c30
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR 0x2c31
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK 0x2c32
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC 0x2c33
+#define PCI_DEVICE_ID_INTEL_I7_NONCORE 0x2c41
+#define PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT 0x2c40
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE 0x2c50
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT 0x2c51
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2 0x2c70
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_SAD 0x2c81
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0 0x2c90
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_PHY0 0x2c91
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR 0x2c98
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD 0x2c99
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST 0x2c9C
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL 0x2ca0
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR 0x2ca1
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK 0x2ca2
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC 0x2ca3
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL 0x2ca8
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR 0x2ca9
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK 0x2caa
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC 0x2cab
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2 0x2d98
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2 0x2d99
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2 0x2d9a
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2 0x2d9c
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2 0x2da0
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2 0x2da1
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2 0x2da2
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2 0x2da3
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2 0x2da8
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2 0x2da9
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2 0x2daa
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2 0x2dab
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2 0x2db0
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2 0x2db1
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2 0x2db2
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2 0x2db3
#define PCI_DEVICE_ID_INTEL_82855PM_HB 0x3340
#define PCI_DEVICE_ID_INTEL_IOAT_TBG4 0x3429
#define PCI_DEVICE_ID_INTEL_IOAT_TBG5 0x342a
#define PCI_DEVICE_ID_INTEL_IOAT_TBG6 0x342b
#define PCI_DEVICE_ID_INTEL_IOAT_TBG7 0x342c
+#define PCI_DEVICE_ID_INTEL_X58_HUB_MGMT 0x342e
#define PCI_DEVICE_ID_INTEL_IOAT_TBG0 0x3430
#define PCI_DEVICE_ID_INTEL_IOAT_TBG1 0x3431
#define PCI_DEVICE_ID_INTEL_IOAT_TBG2 0x3432
diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h
index 68567c0..ce2dc65 100644
--- a/include/linux/percpu-defs.h
+++ b/include/linux/percpu-defs.h
@@ -131,11 +131,11 @@
* Declaration/definition used for per-CPU variables that must be page aligned.
*/
#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name) \
- DECLARE_PER_CPU_SECTION(type, name, ".page_aligned") \
+ DECLARE_PER_CPU_SECTION(type, name, "..page_aligned") \
__aligned(PAGE_SIZE)
#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \
- DEFINE_PER_CPU_SECTION(type, name, ".page_aligned") \
+ DEFINE_PER_CPU_SECTION(type, name, "..page_aligned") \
__aligned(PAGE_SIZE)
/*
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 3fd5c82..5d0266d 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -485,6 +485,7 @@
#include <linux/ftrace.h>
#include <linux/cpu.h>
#include <asm/atomic.h>
+#include <asm/local.h>
#define PERF_MAX_STACK_DEPTH 255
@@ -584,24 +585,22 @@
struct file;
struct perf_mmap_data {
+ atomic_t refcount;
struct rcu_head rcu_head;
#ifdef CONFIG_PERF_USE_VMALLOC
struct work_struct work;
+ int page_order; /* allocation order */
#endif
- int data_order;
int nr_pages; /* nr of data pages */
int writable; /* are we writable */
- int nr_locked; /* nr pages mlocked */
atomic_t poll; /* POLL_ for wakeups */
- atomic_t events; /* event_id limit */
- atomic_long_t head; /* write position */
- atomic_long_t done_head; /* completed head */
-
- atomic_t lock; /* concurrent writes */
- atomic_t wakeup; /* needs a wakeup */
- atomic_t lost; /* nr records lost */
+ local_t head; /* write position */
+ local_t nest; /* nested writers */
+ local_t events; /* event limit */
+ local_t wakeup; /* wakeup stamp */
+ local_t lost; /* nr records lost */
long watermark; /* wakeup watermark */
@@ -632,6 +631,9 @@
struct rcu_head rcu_head;
};
+#define PERF_ATTACH_CONTEXT 0x01
+#define PERF_ATTACH_GROUP 0x02
+
/**
* struct perf_event - performance event kernel representation:
*/
@@ -644,10 +646,10 @@
int nr_siblings;
int group_flags;
struct perf_event *group_leader;
- struct perf_event *output;
const struct pmu *pmu;
enum perf_event_active_state state;
+ unsigned int attach_state;
atomic64_t count;
/*
@@ -705,6 +707,8 @@
/* mmap bits */
struct mutex mmap_mutex;
atomic_t mmap_count;
+ int mmap_locked;
+ struct user_struct *mmap_user;
struct perf_mmap_data *data;
/* poll related */
@@ -728,6 +732,7 @@
perf_overflow_handler_t overflow_handler;
#ifdef CONFIG_EVENT_TRACING
+ struct ftrace_event_call *tp_event;
struct event_filter *filter;
#endif
@@ -803,11 +808,12 @@
struct perf_output_handle {
struct perf_event *event;
struct perf_mmap_data *data;
- unsigned long head;
- unsigned long offset;
+ unsigned long wakeup;
+ unsigned long size;
+ void *addr;
+ int page;
int nmi;
int sample;
- int locked;
};
#ifdef CONFIG_PERF_EVENTS
@@ -993,8 +999,9 @@
}
extern void perf_event_init(void);
-extern void perf_tp_event(int event_id, u64 addr, u64 count, void *record,
- int entry_size, struct pt_regs *regs);
+extern void perf_tp_event(u64 addr, u64 count, void *record,
+ int entry_size, struct pt_regs *regs,
+ struct hlist_head *head);
extern void perf_bp_event(struct perf_event *event, void *data);
#ifndef perf_misc_flags
diff --git a/include/linux/personality.h b/include/linux/personality.h
index 1261208..eec3bae 100644
--- a/include/linux/personality.h
+++ b/include/linux/personality.h
@@ -12,7 +12,7 @@
extern int register_exec_domain(struct exec_domain *);
extern int unregister_exec_domain(struct exec_domain *);
-extern int __set_personality(unsigned long);
+extern int __set_personality(unsigned int);
#endif /* __KERNEL__ */
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
index 16de393..4457969 100644
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -139,7 +139,9 @@
void pipe_unlock(struct pipe_inode_info *);
void pipe_double_lock(struct pipe_inode_info *, struct pipe_inode_info *);
-extern unsigned int pipe_max_pages;
+extern unsigned int pipe_max_size, pipe_min_size;
+int pipe_proc_fn(struct ctl_table *, int, void __user *, size_t *, loff_t *);
+
/* Drop the inode semaphore and wait for a pipe event, atomically */
void pipe_wait(struct pipe_inode_info *pipe);
diff --git a/include/linux/quota.h b/include/linux/quota.h
index 7126a15..94c1f03 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -174,8 +174,7 @@
#include <linux/rwsem.h>
#include <linux/spinlock.h>
#include <linux/wait.h>
-#include <linux/percpu.h>
-#include <linux/smp.h>
+#include <linux/percpu_counter.h>
#include <linux/dqblk_xfs.h>
#include <linux/dqblk_v1.h>
@@ -254,6 +253,7 @@
struct dqstats {
int stat[_DQST_DQSTAT_LAST];
+ struct percpu_counter counter[_DQST_DQSTAT_LAST];
};
extern struct dqstats *dqstats_pcpu;
@@ -261,20 +261,12 @@
static inline void dqstats_inc(unsigned int type)
{
-#ifdef CONFIG_SMP
- per_cpu_ptr(dqstats_pcpu, smp_processor_id())->stat[type]++;
-#else
- dqstats.stat[type]++;
-#endif
+ percpu_counter_inc(&dqstats.counter[type]);
}
static inline void dqstats_dec(unsigned int type)
{
-#ifdef CONFIG_SMP
- per_cpu_ptr(dqstats_pcpu, smp_processor_id())->stat[type]--;
-#else
- dqstats.stat[type]--;
-#endif
+ percpu_counter_dec(&dqstats.counter[type]);
}
#define DQ_MOD_B 0 /* dquot modified since read */
@@ -332,8 +324,8 @@
/* Operations handling requests from userspace */
struct quotactl_ops {
- int (*quota_on)(struct super_block *, int, int, char *, int);
- int (*quota_off)(struct super_block *, int, int);
+ int (*quota_on)(struct super_block *, int, int, char *);
+ int (*quota_off)(struct super_block *, int);
int (*quota_sync)(struct super_block *, int, int);
int (*get_info)(struct super_block *, int, struct if_dqinfo *);
int (*set_info)(struct super_block *, int, struct if_dqinfo *);
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index 370abb1..aa36793 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -9,6 +9,10 @@
#include <linux/fs.h>
+#define DQUOT_SPACE_WARN 0x1
+#define DQUOT_SPACE_RESERVE 0x2
+#define DQUOT_SPACE_NOFAIL 0x4
+
static inline struct quota_info *sb_dqopt(struct super_block *sb)
{
return &sb->s_dquot;
@@ -41,15 +45,22 @@
struct dquot *dquot_alloc(struct super_block *sb, int type);
void dquot_destroy(struct dquot *dquot);
-int __dquot_alloc_space(struct inode *inode, qsize_t number,
- int warn, int reserve);
-void __dquot_free_space(struct inode *inode, qsize_t number, int reserve);
+int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags);
+void __dquot_free_space(struct inode *inode, qsize_t number, int flags);
int dquot_alloc_inode(const struct inode *inode);
int dquot_claim_space_nodirty(struct inode *inode, qsize_t number);
void dquot_free_inode(const struct inode *inode);
+int dquot_disable(struct super_block *sb, int type, unsigned int flags);
+/* Suspend quotas on remount RO */
+static inline int dquot_suspend(struct super_block *sb, int type)
+{
+ return dquot_disable(sb, type, DQUOT_SUSPENDED);
+}
+int dquot_resume(struct super_block *sb, int type);
+
int dquot_commit(struct dquot *dquot);
int dquot_acquire(struct dquot *dquot);
int dquot_release(struct dquot *dquot);
@@ -58,27 +69,25 @@
int dquot_file_open(struct inode *inode, struct file *file);
-int vfs_quota_on(struct super_block *sb, int type, int format_id,
- char *path, int remount);
-int vfs_quota_enable(struct inode *inode, int type, int format_id,
+int dquot_quota_on(struct super_block *sb, int type, int format_id,
+ char *path);
+int dquot_enable(struct inode *inode, int type, int format_id,
unsigned int flags);
-int vfs_quota_on_path(struct super_block *sb, int type, int format_id,
+int dquot_quota_on_path(struct super_block *sb, int type, int format_id,
struct path *path);
-int vfs_quota_on_mount(struct super_block *sb, char *qf_name,
+int dquot_quota_on_mount(struct super_block *sb, char *qf_name,
int format_id, int type);
-int vfs_quota_off(struct super_block *sb, int type, int remount);
-int vfs_quota_disable(struct super_block *sb, int type, unsigned int flags);
-int vfs_quota_sync(struct super_block *sb, int type, int wait);
-int vfs_get_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
-int vfs_set_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
-int vfs_get_dqblk(struct super_block *sb, int type, qid_t id,
+int dquot_quota_off(struct super_block *sb, int type);
+int dquot_quota_sync(struct super_block *sb, int type, int wait);
+int dquot_get_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
+int dquot_set_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
+int dquot_get_dqblk(struct super_block *sb, int type, qid_t id,
struct fs_disk_quota *di);
-int vfs_set_dqblk(struct super_block *sb, int type, qid_t id,
+int dquot_set_dqblk(struct super_block *sb, int type, qid_t id,
struct fs_disk_quota *di);
int __dquot_transfer(struct inode *inode, struct dquot **transfer_to);
int dquot_transfer(struct inode *inode, struct iattr *iattr);
-int vfs_dq_quota_on_remount(struct super_block *sb);
static inline struct mem_dqinfo *sb_dqinfo(struct super_block *sb, int type)
{
@@ -145,20 +154,7 @@
* Operations supported for diskquotas.
*/
extern const struct dquot_operations dquot_operations;
-extern const struct quotactl_ops vfs_quotactl_ops;
-
-#define sb_dquot_ops (&dquot_operations)
-#define sb_quotactl_ops (&vfs_quotactl_ops)
-
-/* Cannot be called inside a transaction */
-static inline int vfs_dq_off(struct super_block *sb, int remount)
-{
- int ret = -ENOSYS;
-
- if (sb->s_qcop && sb->s_qcop->quota_off)
- ret = sb->s_qcop->quota_off(sb, -1, remount);
- return ret;
-}
+extern const struct quotactl_ops dquot_quotactl_ops;
#else
@@ -203,12 +199,6 @@
return 0;
}
-/*
- * NO-OP when quota not configured.
- */
-#define sb_dquot_ops (NULL)
-#define sb_quotactl_ops (NULL)
-
static inline void dquot_initialize(struct inode *inode)
{
}
@@ -226,33 +216,23 @@
{
}
-static inline int vfs_dq_off(struct super_block *sb, int remount)
-{
- return 0;
-}
-
-static inline int vfs_dq_quota_on_remount(struct super_block *sb)
-{
- return 0;
-}
-
static inline int dquot_transfer(struct inode *inode, struct iattr *iattr)
{
return 0;
}
static inline int __dquot_alloc_space(struct inode *inode, qsize_t number,
- int warn, int reserve)
+ int flags)
{
- if (!reserve)
+ if (!(flags & DQUOT_SPACE_RESERVE))
inode_add_bytes(inode, number);
return 0;
}
static inline void __dquot_free_space(struct inode *inode, qsize_t number,
- int reserve)
+ int flags)
{
- if (!reserve)
+ if (!(flags & DQUOT_SPACE_RESERVE))
inode_sub_bytes(inode, number);
}
@@ -262,13 +242,35 @@
return 0;
}
+static inline int dquot_disable(struct super_block *sb, int type,
+ unsigned int flags)
+{
+ return 0;
+}
+
+static inline int dquot_suspend(struct super_block *sb, int type)
+{
+ return 0;
+}
+
+static inline int dquot_resume(struct super_block *sb, int type)
+{
+ return 0;
+}
+
#define dquot_file_open generic_file_open
#endif /* CONFIG_QUOTA */
static inline int dquot_alloc_space_nodirty(struct inode *inode, qsize_t nr)
{
- return __dquot_alloc_space(inode, nr, 1, 0);
+ return __dquot_alloc_space(inode, nr, DQUOT_SPACE_WARN);
+}
+
+static inline void dquot_alloc_space_nofail(struct inode *inode, qsize_t nr)
+{
+ __dquot_alloc_space(inode, nr, DQUOT_SPACE_WARN|DQUOT_SPACE_NOFAIL);
+ mark_inode_dirty(inode);
}
static inline int dquot_alloc_space(struct inode *inode, qsize_t nr)
@@ -286,6 +288,11 @@
return dquot_alloc_space_nodirty(inode, nr << inode->i_blkbits);
}
+static inline void dquot_alloc_block_nofail(struct inode *inode, qsize_t nr)
+{
+ dquot_alloc_space_nofail(inode, nr << inode->i_blkbits);
+}
+
static inline int dquot_alloc_block(struct inode *inode, qsize_t nr)
{
return dquot_alloc_space(inode, nr << inode->i_blkbits);
@@ -293,7 +300,7 @@
static inline int dquot_prealloc_block_nodirty(struct inode *inode, qsize_t nr)
{
- return __dquot_alloc_space(inode, nr << inode->i_blkbits, 0, 0);
+ return __dquot_alloc_space(inode, nr << inode->i_blkbits, 0);
}
static inline int dquot_prealloc_block(struct inode *inode, qsize_t nr)
@@ -308,7 +315,8 @@
static inline int dquot_reserve_block(struct inode *inode, qsize_t nr)
{
- return __dquot_alloc_space(inode, nr << inode->i_blkbits, 1, 1);
+ return __dquot_alloc_space(inode, nr << inode->i_blkbits,
+ DQUOT_SPACE_WARN|DQUOT_SPACE_RESERVE);
}
static inline int dquot_claim_block(struct inode *inode, qsize_t nr)
@@ -345,7 +353,7 @@
static inline void dquot_release_reservation_block(struct inode *inode,
qsize_t nr)
{
- __dquot_free_space(inode, nr << inode->i_blkbits, 1);
+ __dquot_free_space(inode, nr << inode->i_blkbits, DQUOT_SPACE_RESERVE);
}
#endif /* _LINUX_QUOTAOPS_ */
diff --git a/include/linux/random.h b/include/linux/random.h
index 25d02fe..fb7ab9d 100644
--- a/include/linux/random.h
+++ b/include/linux/random.h
@@ -40,6 +40,10 @@
__u32 buf[0];
};
+struct rnd_state {
+ __u32 s1, s2, s3;
+};
+
/* Exported functions */
#ifdef __KERNEL__
@@ -74,6 +78,30 @@
u32 random32(void);
void srandom32(u32 seed);
+u32 prandom32(struct rnd_state *);
+
+/*
+ * Handle minimum values for seeds
+ */
+static inline u32 __seed(u32 x, u32 m)
+{
+ return (x < m) ? x + m : x;
+}
+
+/**
+ * prandom32_seed - set seed for prandom32().
+ * @state: pointer to state structure to receive the seed.
+ * @seed: arbitrary 64-bit value to use as a seed.
+ */
+static inline void prandom32_seed(struct rnd_state *state, u64 seed)
+{
+ u32 i = (seed >> 32) ^ (seed << 10) ^ seed;
+
+ state->s1 = __seed(i, 1);
+ state->s2 = __seed(i, 7);
+ state->s3 = __seed(i, 15);
+}
+
#endif /* __KERNEL___ */
#endif /* _LINUX_RANDOM_H */
diff --git a/include/linux/rbtree.h b/include/linux/rbtree.h
index fe1872e..7066acb 100644
--- a/include/linux/rbtree.h
+++ b/include/linux/rbtree.h
@@ -110,7 +110,6 @@
struct rb_root
{
struct rb_node *rb_node;
- void (*augment_cb)(struct rb_node *node);
};
@@ -130,9 +129,7 @@
rb->rb_parent_color = (rb->rb_parent_color & ~1) | color;
}
-#define RB_ROOT (struct rb_root) { NULL, NULL, }
-#define RB_AUGMENT_ROOT(x) (struct rb_root) { NULL, x}
-
+#define RB_ROOT (struct rb_root) { NULL, }
#define rb_entry(ptr, type, member) container_of(ptr, type, member)
#define RB_EMPTY_ROOT(root) ((root)->rb_node == NULL)
@@ -142,6 +139,14 @@
extern void rb_insert_color(struct rb_node *, struct rb_root *);
extern void rb_erase(struct rb_node *, struct rb_root *);
+typedef void (*rb_augment_f)(struct rb_node *node, void *data);
+
+extern void rb_augment_insert(struct rb_node *node,
+ rb_augment_f func, void *data);
+extern struct rb_node *rb_augment_erase_begin(struct rb_node *node);
+extern void rb_augment_erase_end(struct rb_node *node,
+ rb_augment_f func, void *data);
+
/* Find logical next and previous nodes in a tree */
extern struct rb_node *rb_next(const struct rb_node *);
extern struct rb_node *rb_prev(const struct rb_node *);
diff --git a/include/linux/rio.h b/include/linux/rio.h
index dc0c755..bd6eb0e 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -64,10 +64,13 @@
#define RIO_INB_MBOX_RESOURCE 1
#define RIO_OUTB_MBOX_RESOURCE 2
+#define RIO_PW_MSG_SIZE 64
+
extern struct bus_type rio_bus_type;
extern struct list_head rio_devices; /* list of all devices */
struct rio_mport;
+union rio_pw_msg;
/**
* struct rio_dev - RIO device info
@@ -85,11 +88,15 @@
* @swpinfo: Switch port info
* @src_ops: Source operation capabilities
* @dst_ops: Destination operation capabilities
+ * @comp_tag: RIO component tag
+ * @phys_efptr: RIO device extended features pointer
+ * @em_efptr: RIO Error Management features pointer
* @dma_mask: Mask of bits of RIO address this device implements
* @rswitch: Pointer to &struct rio_switch if valid for this device
* @driver: Driver claiming this device
* @dev: Device model device
* @riores: RIO resources this device owns
+ * @pwcback: port-write callback function for this device
* @destid: Network destination ID
*/
struct rio_dev {
@@ -107,11 +114,15 @@
u32 swpinfo; /* Only used for switches */
u32 src_ops;
u32 dst_ops;
+ u32 comp_tag;
+ u32 phys_efptr;
+ u32 em_efptr;
u64 dma_mask;
struct rio_switch *rswitch; /* RIO switch info */
struct rio_driver *driver; /* RIO driver claiming this device */
struct device dev; /* LDM device structure */
struct resource riores[RIO_MAX_DEV_RESOURCES];
+ int (*pwcback) (struct rio_dev *rdev, union rio_pw_msg *msg, int step);
u16 destid;
};
@@ -211,8 +222,14 @@
* @hopcount: Hopcount to this switch
* @destid: Associated destid in the path
* @route_table: Copy of switch routing table
+ * @port_ok: Status of each port (one bit per port) - OK=1 or UNINIT=0
* @add_entry: Callback for switch-specific route add function
* @get_entry: Callback for switch-specific route get function
+ * @clr_table: Callback for switch-specific clear route table function
+ * @set_domain: Callback for switch-specific domain setting function
+ * @get_domain: Callback for switch-specific domain get function
+ * @em_init: Callback for switch-specific error management initialization function
+ * @em_handle: Callback for switch-specific error management handler function
*/
struct rio_switch {
struct list_head node;
@@ -220,10 +237,19 @@
u16 hopcount;
u16 destid;
u8 *route_table;
+ u32 port_ok;
int (*add_entry) (struct rio_mport * mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 route_port);
int (*get_entry) (struct rio_mport * mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 * route_port);
+ int (*clr_table) (struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table);
+ int (*set_domain) (struct rio_mport *mport, u16 destid, u8 hopcount,
+ u8 sw_domain);
+ int (*get_domain) (struct rio_mport *mport, u16 destid, u8 hopcount,
+ u8 *sw_domain);
+ int (*em_init) (struct rio_dev *dev);
+ int (*em_handle) (struct rio_dev *dev, u8 swport);
};
/* Low-level architecture-dependent routines */
@@ -235,6 +261,7 @@
* @cread: Callback to perform network read of config space.
* @cwrite: Callback to perform network write of config space.
* @dsend: Callback to send a doorbell message.
+ * @pwenable: Callback to enable/disable port-write message handling.
*/
struct rio_ops {
int (*lcread) (struct rio_mport *mport, int index, u32 offset, int len,
@@ -246,6 +273,7 @@
int (*cwrite) (struct rio_mport *mport, int index, u16 destid,
u8 hopcount, u32 offset, int len, u32 data);
int (*dsend) (struct rio_mport *mport, int index, u16 destid, u16 data);
+ int (*pwenable) (struct rio_mport *mport, int enable);
};
#define RIO_RESOURCE_MEM 0x00000100
@@ -302,21 +330,28 @@
};
/**
- * struct rio_route_ops - Per-switch route operations
+ * struct rio_switch_ops - Per-switch operations
* @vid: RIO vendor ID
* @did: RIO device ID
- * @add_hook: Callback that adds a route entry
- * @get_hook: Callback that gets a route entry
+ * @init_hook: Callback that performs switch device initialization
*
- * Defines the operations that are necessary to manipulate the route
- * tables for a particular RIO switch device.
+ * Defines the operations that are necessary to initialize/control
+ * a particular RIO switch device.
*/
-struct rio_route_ops {
+struct rio_switch_ops {
u16 vid, did;
- int (*add_hook) (struct rio_mport * mport, u16 destid, u8 hopcount,
- u16 table, u16 route_destid, u8 route_port);
- int (*get_hook) (struct rio_mport * mport, u16 destid, u8 hopcount,
- u16 table, u16 route_destid, u8 * route_port);
+ int (*init_hook) (struct rio_dev *rdev, int do_enum);
+};
+
+union rio_pw_msg {
+ struct {
+ u32 comptag; /* Component Tag CSR */
+ u32 errdetect; /* Port N Error Detect CSR */
+ u32 is_port; /* Implementation specific + PortID */
+ u32 ltlerrdet; /* LTL Error Detect CSR */
+ u32 padding[12];
+ } em;
+ u32 raw[RIO_PW_MSG_SIZE/sizeof(u32)];
};
/* Architecture and hardware-specific functions */
diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h
index c93a58a..edc55da 100644
--- a/include/linux/rio_drv.h
+++ b/include/linux/rio_drv.h
@@ -413,6 +413,12 @@
int rio_request_region(struct rio_dev *, int, char *);
void rio_release_region(struct rio_dev *, int);
+/* Port-Write management */
+extern int rio_request_inb_pwrite(struct rio_dev *,
+ int (*)(struct rio_dev *, union rio_pw_msg*, int));
+extern int rio_release_inb_pwrite(struct rio_dev *);
+extern int rio_inb_pwrite_handler(union rio_pw_msg *pw_msg);
+
/* LDM support */
int rio_register_driver(struct rio_driver *);
void rio_unregister_driver(struct rio_driver *);
diff --git a/include/linux/rio_ids.h b/include/linux/rio_ids.h
index 919d4e0..db50e1c 100644
--- a/include/linux/rio_ids.h
+++ b/include/linux/rio_ids.h
@@ -20,5 +20,19 @@
#define RIO_VID_TUNDRA 0x000d
#define RIO_DID_TSI500 0x0500
+#define RIO_DID_TSI568 0x0568
+#define RIO_DID_TSI572 0x0572
+#define RIO_DID_TSI574 0x0574
+#define RIO_DID_TSI576 0x0578 /* Same ID as Tsi578 */
+#define RIO_DID_TSI577 0x0577
+#define RIO_DID_TSI578 0x0578
+
+#define RIO_VID_IDT 0x0038
+#define RIO_DID_IDT70K200 0x0310
+#define RIO_DID_IDTCPS8 0x035c
+#define RIO_DID_IDTCPS12 0x035d
+#define RIO_DID_IDTCPS16 0x035b
+#define RIO_DID_IDTCPS6Q 0x035f
+#define RIO_DID_IDTCPS10Q 0x035e
#endif /* LINUX_RIO_IDS_H */
diff --git a/include/linux/rio_regs.h b/include/linux/rio_regs.h
index 326540f..aedee04 100644
--- a/include/linux/rio_regs.h
+++ b/include/linux/rio_regs.h
@@ -39,6 +39,8 @@
#define RIO_PEF_INB_MBOX2 0x00200000 /* [II] Mailbox 2 */
#define RIO_PEF_INB_MBOX3 0x00100000 /* [II] Mailbox 3 */
#define RIO_PEF_INB_DOORBELL 0x00080000 /* [II] Doorbells */
+#define RIO_PEF_EXT_RT 0x00000200 /* [III, 1.3] Extended route table support */
+#define RIO_PEF_STD_RT 0x00000100 /* [III, 1.3] Standard route table support */
#define RIO_PEF_CTLS 0x00000010 /* [III] CTLS */
#define RIO_PEF_EXT_FEATURES 0x00000008 /* [I] EFT_PTR valid */
#define RIO_PEF_ADDR_66 0x00000004 /* [I] 66 bits */
@@ -91,7 +93,10 @@
#define RIO_OPS_ATOMIC_CLR 0x00000010 /* [I] Atomic clr op */
#define RIO_OPS_PORT_WRITE 0x00000004 /* [I] Port-write op */
- /* 0x20-0x3c *//* Reserved */
+ /* 0x20-0x30 *//* Reserved */
+
+#define RIO_SWITCH_RT_LIMIT 0x34 /* [III, 1.3] Switch Route Table Destination ID Limit CAR */
+#define RIO_RT_MAX_DESTID 0x0000ffff
#define RIO_MBOX_CSR 0x40 /* [II] Mailbox CSR */
#define RIO_MBOX0_AVAIL 0x80000000 /* [II] Mbox 0 avail */
@@ -153,7 +158,11 @@
#define RIO_HOST_DID_LOCK_CSR 0x68 /* [III] Host Base Device ID Lock CSR */
#define RIO_COMPONENT_TAG_CSR 0x6c /* [III] Component Tag CSR */
- /* 0x70-0xf8 *//* Reserved */
+#define RIO_STD_RTE_CONF_DESTID_SEL_CSR 0x70
+#define RIO_STD_RTE_CONF_PORT_SEL_CSR 0x74
+#define RIO_STD_RTE_DEFAULT_PORT 0x78
+
+ /* 0x7c-0xf8 *//* Reserved */
/* 0x100-0xfff8 *//* [I] Extended Features Space */
/* 0x10000-0xfffff8 *//* [I] Implementation-defined Space */
@@ -183,9 +192,14 @@
#define RIO_EFB_PAR_EP_ID 0x0001 /* [IV] LP/LVDS EP Devices */
#define RIO_EFB_PAR_EP_REC_ID 0x0002 /* [IV] LP/LVDS EP Recovery Devices */
#define RIO_EFB_PAR_EP_FREE_ID 0x0003 /* [IV] LP/LVDS EP Free Devices */
+#define RIO_EFB_SER_EP_ID_V13P 0x0001 /* [VI] LP/Serial EP Devices, RapidIO Spec ver 1.3 and above */
+#define RIO_EFB_SER_EP_REC_ID_V13P 0x0002 /* [VI] LP/Serial EP Recovery Devices, RapidIO Spec ver 1.3 and above */
+#define RIO_EFB_SER_EP_FREE_ID_V13P 0x0003 /* [VI] LP/Serial EP Free Devices, RapidIO Spec ver 1.3 and above */
#define RIO_EFB_SER_EP_ID 0x0004 /* [VI] LP/Serial EP Devices */
#define RIO_EFB_SER_EP_REC_ID 0x0005 /* [VI] LP/Serial EP Recovery Devices */
#define RIO_EFB_SER_EP_FREE_ID 0x0006 /* [VI] LP/Serial EP Free Devices */
+#define RIO_EFB_SER_EP_FREC_ID 0x0009 /* [VI] LP/Serial EP Free Recovery Devices */
+#define RIO_EFB_ERR_MGMNT 0x0007 /* [VIII] Error Management Extensions */
/*
* Physical 8/16 LP-LVDS
@@ -201,15 +215,71 @@
#define RIO_PORT_MNT_HEADER 0x0000
#define RIO_PORT_REQ_CTL_CSR 0x0020
#define RIO_PORT_RSP_CTL_CSR 0x0024 /* 0x0001/0x0002 */
+#define RIO_PORT_LINKTO_CTL_CSR 0x0020 /* Serial */
+#define RIO_PORT_RSPTO_CTL_CSR 0x0024 /* Serial */
#define RIO_PORT_GEN_CTL_CSR 0x003c
#define RIO_PORT_GEN_HOST 0x80000000
#define RIO_PORT_GEN_MASTER 0x40000000
#define RIO_PORT_GEN_DISCOVERED 0x20000000
#define RIO_PORT_N_MNT_REQ_CSR(x) (0x0040 + x*0x20) /* 0x0002 */
#define RIO_PORT_N_MNT_RSP_CSR(x) (0x0044 + x*0x20) /* 0x0002 */
+#define RIO_PORT_N_MNT_RSP_RVAL 0x80000000 /* Response Valid */
+#define RIO_PORT_N_MNT_RSP_ASTAT 0x000003e0 /* ackID Status */
+#define RIO_PORT_N_MNT_RSP_LSTAT 0x0000001f /* Link Status */
#define RIO_PORT_N_ACK_STS_CSR(x) (0x0048 + x*0x20) /* 0x0002 */
-#define RIO_PORT_N_ERR_STS_CSR(x) (0x58 + x*0x20)
-#define PORT_N_ERR_STS_PORT_OK 0x00000002
-#define RIO_PORT_N_CTL_CSR(x) (0x5c + x*0x20)
+#define RIO_PORT_N_ACK_CLEAR 0x80000000
+#define RIO_PORT_N_ACK_INBOUND 0x1f000000
+#define RIO_PORT_N_ACK_OUTSTAND 0x00001f00
+#define RIO_PORT_N_ACK_OUTBOUND 0x0000001f
+#define RIO_PORT_N_ERR_STS_CSR(x) (0x0058 + x*0x20)
+#define RIO_PORT_N_ERR_STS_PW_OUT_ES 0x00010000 /* Output Error-stopped */
+#define RIO_PORT_N_ERR_STS_PW_INP_ES 0x00000100 /* Input Error-stopped */
+#define RIO_PORT_N_ERR_STS_PW_PEND 0x00000010 /* Port-Write Pending */
+#define RIO_PORT_N_ERR_STS_PORT_ERR 0x00000004
+#define RIO_PORT_N_ERR_STS_PORT_OK 0x00000002
+#define RIO_PORT_N_ERR_STS_PORT_UNINIT 0x00000001
+#define RIO_PORT_N_ERR_STS_CLR_MASK 0x07120204
+#define RIO_PORT_N_CTL_CSR(x) (0x005c + x*0x20)
+#define RIO_PORT_N_CTL_PWIDTH 0xc0000000
+#define RIO_PORT_N_CTL_PWIDTH_1 0x00000000
+#define RIO_PORT_N_CTL_PWIDTH_4 0x40000000
+#define RIO_PORT_N_CTL_P_TYP_SER 0x00000001
+#define RIO_PORT_N_CTL_LOCKOUT 0x00000002
+#define RIO_PORT_N_CTL_EN_RX_SER 0x00200000
+#define RIO_PORT_N_CTL_EN_TX_SER 0x00400000
+#define RIO_PORT_N_CTL_EN_RX_PAR 0x08000000
+#define RIO_PORT_N_CTL_EN_TX_PAR 0x40000000
+
+/*
+ * Error Management Extensions (RapidIO 1.3+, Part 8)
+ *
+ * Extended Features Block ID=0x0007
+ */
+
+/* General EM Registers (Common for all Ports) */
+
+#define RIO_EM_EFB_HEADER 0x000 /* Error Management Extensions Block Header */
+#define RIO_EM_LTL_ERR_DETECT 0x008 /* Logical/Transport Layer Error Detect CSR */
+#define RIO_EM_LTL_ERR_EN 0x00c /* Logical/Transport Layer Error Enable CSR */
+#define RIO_EM_LTL_HIADDR_CAP 0x010 /* Logical/Transport Layer High Address Capture CSR */
+#define RIO_EM_LTL_ADDR_CAP 0x014 /* Logical/Transport Layer Address Capture CSR */
+#define RIO_EM_LTL_DEVID_CAP 0x018 /* Logical/Transport Layer Device ID Capture CSR */
+#define RIO_EM_LTL_CTRL_CAP 0x01c /* Logical/Transport Layer Control Capture CSR */
+#define RIO_EM_PW_TGT_DEVID 0x028 /* Port-write Target deviceID CSR */
+#define RIO_EM_PKT_TTL 0x02c /* Packet Time-to-live CSR */
+
+/* Per-Port EM Registers */
+
+#define RIO_EM_PN_ERR_DETECT(x) (0x040 + x*0x40) /* Port N Error Detect CSR */
+#define REM_PED_IMPL_SPEC 0x80000000
+#define REM_PED_LINK_TO 0x00000001
+#define RIO_EM_PN_ERRRATE_EN(x) (0x044 + x*0x40) /* Port N Error Rate Enable CSR */
+#define RIO_EM_PN_ATTRIB_CAP(x) (0x048 + x*0x40) /* Port N Attributes Capture CSR */
+#define RIO_EM_PN_PKT_CAP_0(x) (0x04c + x*0x40) /* Port N Packet/Control Symbol Capture 0 CSR */
+#define RIO_EM_PN_PKT_CAP_1(x) (0x050 + x*0x40) /* Port N Packet Capture 1 CSR */
+#define RIO_EM_PN_PKT_CAP_2(x) (0x054 + x*0x40) /* Port N Packet Capture 2 CSR */
+#define RIO_EM_PN_PKT_CAP_3(x) (0x058 + x*0x40) /* Port N Packet Capture 3 CSR */
+#define RIO_EM_PN_ERRRATE(x) (0x068 + x*0x40) /* Port N Error Rate CSR */
+#define RIO_EM_PN_ERRRATE_TR(x) (0x06c + x*0x40) /* Port N Error Rate Threshold CSR */
#endif /* LINUX_RIO_REGS_H */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index c0151ff..747fcae 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -139,7 +139,7 @@
extern unsigned long nr_running(void);
extern unsigned long nr_uninterruptible(void);
extern unsigned long nr_iowait(void);
-extern unsigned long nr_iowait_cpu(void);
+extern unsigned long nr_iowait_cpu(int cpu);
extern unsigned long this_cpu_load(void);
@@ -268,7 +268,6 @@
extern void init_idle_bootup_task(struct task_struct *idle);
extern int runqueue_is_locked(int cpu);
-extern void task_rq_unlock_wait(struct task_struct *p);
extern cpumask_var_t nohz_cpu_mask;
#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ)
@@ -527,8 +526,9 @@
* the locking of signal_struct.
*/
struct signal_struct {
- atomic_t count;
+ atomic_t sigcnt;
atomic_t live;
+ int nr_threads;
wait_queue_head_t wait_chldexit; /* for wait4() */
@@ -1423,6 +1423,7 @@
nodemask_t mems_allowed; /* Protected by alloc_lock */
int mems_allowed_change_disable;
int cpuset_mem_spread_rotor;
+ int cpuset_slab_spread_rotor;
#endif
#ifdef CONFIG_CGROUPS
/* Control Group info protected by css_set_lock */
@@ -2035,7 +2036,7 @@
extern void __wake_up_parent(struct task_struct *p, struct task_struct *parent);
extern void force_sig(int, struct task_struct *);
extern int send_sig(int, struct task_struct *, int);
-extern void zap_other_threads(struct task_struct *p);
+extern int zap_other_threads(struct task_struct *p);
extern struct sigqueue *sigqueue_alloc(void);
extern void sigqueue_free(struct sigqueue *);
extern int send_sigqueue(struct sigqueue *, struct task_struct *, int group);
@@ -2100,7 +2101,6 @@
extern void exit_thread(void);
extern void exit_files(struct task_struct *);
-extern void __cleanup_signal(struct signal_struct *);
extern void __cleanup_sighand(struct sighand_struct *);
extern void exit_itimers(struct signal_struct *);
@@ -2147,6 +2147,11 @@
#define while_each_thread(g, t) \
while ((t = next_thread(t)) != g)
+static inline int get_nr_threads(struct task_struct *tsk)
+{
+ return tsk->signal->nr_threads;
+}
+
/* de_thread depends on thread_group_leader not being a pid based check */
#define thread_group_leader(p) (p == p->group_leader)
@@ -2393,10 +2398,6 @@
spin_lock_init(&sig->cputimer.lock);
}
-static inline void thread_group_cputime_free(struct signal_struct *sig)
-{
-}
-
/*
* Reevaluate whether the task has signals pending delivery.
* Wake the task if so.
diff --git a/include/linux/sdhci-pltfm.h b/include/linux/sdhci-pltfm.h
new file mode 100644
index 0000000..0239bd7
--- /dev/null
+++ b/include/linux/sdhci-pltfm.h
@@ -0,0 +1,35 @@
+/*
+ * Platform data declarations for the sdhci-pltfm driver.
+ *
+ * Copyright (c) 2010 MontaVista Software, LLC.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef _SDHCI_PLTFM_H
+#define _SDHCI_PLTFM_H
+
+struct sdhci_ops;
+struct sdhci_host;
+
+/**
+ * struct sdhci_pltfm_data - SDHCI platform-specific information & hooks
+ * @ops: optional pointer to the platform-provided SDHCI ops
+ * @quirks: optional SDHCI quirks
+ * @init: optional hook that is called during device probe, before the
+ * driver tries to access any SDHCI registers
+ * @exit: optional hook that is called during device removal
+ */
+struct sdhci_pltfm_data {
+ struct sdhci_ops *ops;
+ unsigned int quirks;
+ int (*init)(struct sdhci_host *host);
+ void (*exit)(struct sdhci_host *host);
+};
+
+#endif /* _SDHCI_PLTFM_H */
diff --git a/include/linux/sem.h b/include/linux/sem.h
index 8a4adbe..f2961af 100644
--- a/include/linux/sem.h
+++ b/include/linux/sem.h
@@ -79,6 +79,7 @@
#ifdef __KERNEL__
#include <asm/atomic.h>
#include <linux/rcupdate.h>
+#include <linux/cache.h>
struct task_struct;
@@ -91,7 +92,8 @@
/* One sem_array data structure for each set of semaphores in the system. */
struct sem_array {
- struct kern_ipc_perm sem_perm; /* permissions .. see ipc.h */
+ struct kern_ipc_perm ____cacheline_aligned_in_smp
+ sem_perm; /* permissions .. see ipc.h */
time_t sem_otime; /* last semop time */
time_t sem_ctime; /* last change time */
struct sem *sem_base; /* ptr to first semaphore in array */
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index f5364a1..baed212 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -2,9 +2,7 @@
#define __LINUX_SERIAL_SCI_H
#include <linux/serial_core.h>
-#ifdef CONFIG_SERIAL_SH_SCI_DMA
-#include <asm/dmaengine.h>
-#endif
+#include <linux/sh_dma.h>
/*
* Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts)
diff --git a/include/linux/sfi.h b/include/linux/sfi.h
index 9a6f760..0299b4c 100644
--- a/include/linux/sfi.h
+++ b/include/linux/sfi.h
@@ -73,6 +73,8 @@
#define SFI_SIG_SPIB "SPIB"
#define SFI_SIG_I2CB "I2CB"
#define SFI_SIG_GPEM "GPEM"
+#define SFI_SIG_DEVS "DEVS"
+#define SFI_SIG_GPIO "GPIO"
#define SFI_SIGNATURE_SIZE 4
#define SFI_OEM_ID_SIZE 6
@@ -145,6 +147,27 @@
u32 irq;
} __packed;
+struct sfi_device_table_entry {
+ u8 type; /* bus type, I2C, SPI or ...*/
+#define SFI_DEV_TYPE_SPI 0
+#define SFI_DEV_TYPE_I2C 1
+#define SFI_DEV_TYPE_UART 2
+#define SFI_DEV_TYPE_HSI 3
+#define SFI_DEV_TYPE_IPC 4
+
+ u8 host_num; /* attached to host 0, 1...*/
+ u16 addr;
+ u8 irq;
+ u32 max_freq;
+ char name[16];
+} __packed;
+
+struct sfi_gpio_table_entry {
+ char controller_name[16];
+ u16 pin_no;
+ char pin_name[16];
+} __packed;
+
struct sfi_spi_table_entry {
u16 host_num; /* attached to host 0, 1...*/
u16 cs; /* chip select */
@@ -166,7 +189,6 @@
u16 phys_id; /* physical GPE id */
} __packed;
-
typedef int (*sfi_table_handler) (struct sfi_table_header *table);
#ifdef CONFIG_SFI
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 7cdfb4d..f89e7fd 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -380,7 +380,10 @@
kmemcheck_bitfield_begin(flags2);
__u16 queue_mapping:16;
#ifdef CONFIG_IPV6_NDISC_NODETYPE
- __u8 ndisc_nodetype:2;
+ __u8 ndisc_nodetype:2,
+ deliver_no_wcard:1;
+#else
+ __u8 deliver_no_wcard:1;
#endif
kmemcheck_bitfield_end(flags2);
@@ -501,7 +504,7 @@
return __alloc_skb(size, priority, 1, -1);
}
-extern int skb_recycle_check(struct sk_buff *skb, int skb_size);
+extern bool skb_recycle_check(struct sk_buff *skb, int skb_size);
extern struct sk_buff *skb_morph(struct sk_buff *dst, struct sk_buff *src);
extern struct sk_buff *skb_clone(struct sk_buff *skb,
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
index 55695c8..4ba59cf 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -75,12 +75,6 @@
int offset; /* Free pointer offset. */
struct kmem_cache_order_objects oo;
- /*
- * Avoid an extra cache line for UP, SMP and for the node local to
- * struct kmem_cache.
- */
- struct kmem_cache_node local_node;
-
/* Allocation and freeing of slabs */
struct kmem_cache_order_objects max;
struct kmem_cache_order_objects min;
@@ -102,6 +96,9 @@
*/
int remote_node_defrag_ratio;
struct kmem_cache_node *node[MAX_NUMNODES];
+#else
+ /* Avoid an extra cache line for UP */
+ struct kmem_cache_node local_node;
#endif
};
@@ -140,7 +137,7 @@
#ifdef CONFIG_ZONE_DMA
#define SLUB_DMA __GFP_DMA
/* Reserve extra caches for potential DMA use */
-#define KMALLOC_CACHES (2 * SLUB_PAGE_SHIFT - 6)
+#define KMALLOC_CACHES (2 * SLUB_PAGE_SHIFT)
#else
/* Disable DMA functionality */
#define SLUB_DMA (__force gfp_t)0
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index 89fac6a..f885465 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -60,7 +60,7 @@
/*
* Must define these before including other files, inline functions need them
*/
-#define LOCK_SECTION_NAME ".text.lock."KBUILD_BASENAME
+#define LOCK_SECTION_NAME ".text..lock."KBUILD_BASENAME
#define LOCK_SECTION_START(extra) \
".subsection 1\n\t" \
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 5e781d8..bc7d6bb 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -256,22 +256,22 @@
static inline bool system_entering_hibernation(void) { return false; }
#endif /* CONFIG_HIBERNATION */
-#ifdef CONFIG_HIBERNATION_NVS
-extern int hibernate_nvs_register(unsigned long start, unsigned long size);
-extern int hibernate_nvs_alloc(void);
-extern void hibernate_nvs_free(void);
-extern void hibernate_nvs_save(void);
-extern void hibernate_nvs_restore(void);
-#else /* CONFIG_HIBERNATION_NVS */
-static inline int hibernate_nvs_register(unsigned long a, unsigned long b)
+#ifdef CONFIG_SUSPEND_NVS
+extern int suspend_nvs_register(unsigned long start, unsigned long size);
+extern int suspend_nvs_alloc(void);
+extern void suspend_nvs_free(void);
+extern void suspend_nvs_save(void);
+extern void suspend_nvs_restore(void);
+#else /* CONFIG_SUSPEND_NVS */
+static inline int suspend_nvs_register(unsigned long a, unsigned long b)
{
return 0;
}
-static inline int hibernate_nvs_alloc(void) { return 0; }
-static inline void hibernate_nvs_free(void) {}
-static inline void hibernate_nvs_save(void) {}
-static inline void hibernate_nvs_restore(void) {}
-#endif /* CONFIG_HIBERNATION_NVS */
+static inline int suspend_nvs_alloc(void) { return 0; }
+static inline void suspend_nvs_free(void) {}
+static inline void suspend_nvs_save(void) {}
+static inline void suspend_nvs_restore(void) {}
+#endif /* CONFIG_SUSPEND_NVS */
#ifdef CONFIG_PM_SLEEP
void save_processor_state(void);
diff --git a/include/linux/swap.h b/include/linux/swap.h
index b6b6143..ff4acea 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -282,6 +282,11 @@
extern int shmem_unuse(swp_entry_t entry, struct page *page);
#endif /* CONFIG_MMU */
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
+extern void mem_cgroup_get_shmem_target(struct inode *inode, pgoff_t pgoff,
+ struct page **pagep, swp_entry_t *ent);
+#endif
+
extern void swap_unplug_io_fn(struct backing_dev_info *, struct page *);
#ifdef CONFIG_SWAP
diff --git a/include/linux/swiotlb.h b/include/linux/swiotlb.h
index febedcf..81a4e21 100644
--- a/include/linux/swiotlb.h
+++ b/include/linux/swiotlb.h
@@ -73,16 +73,6 @@
swiotlb_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg,
int nelems, enum dma_data_direction dir);
-extern void
-swiotlb_sync_single_range_for_cpu(struct device *hwdev, dma_addr_t dev_addr,
- unsigned long offset, size_t size,
- enum dma_data_direction dir);
-
-extern void
-swiotlb_sync_single_range_for_device(struct device *hwdev, dma_addr_t dev_addr,
- unsigned long offset, size_t size,
- enum dma_data_direction dir);
-
extern int
swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr);
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 057929b..13ebb54 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -103,22 +103,6 @@
#define __SC_TEST5(t5, a5, ...) __SC_TEST(t5); __SC_TEST4(__VA_ARGS__)
#define __SC_TEST6(t6, a6, ...) __SC_TEST(t6); __SC_TEST5(__VA_ARGS__)
-#ifdef CONFIG_PERF_EVENTS
-
-#define TRACE_SYS_ENTER_PERF_INIT(sname) \
- .perf_event_enable = perf_sysenter_enable, \
- .perf_event_disable = perf_sysenter_disable,
-
-#define TRACE_SYS_EXIT_PERF_INIT(sname) \
- .perf_event_enable = perf_sysexit_enable, \
- .perf_event_disable = perf_sysexit_disable,
-#else
-#define TRACE_SYS_ENTER_PERF(sname)
-#define TRACE_SYS_ENTER_PERF_INIT(sname)
-#define TRACE_SYS_EXIT_PERF(sname)
-#define TRACE_SYS_EXIT_PERF_INIT(sname)
-#endif /* CONFIG_PERF_EVENTS */
-
#ifdef CONFIG_FTRACE_SYSCALLS
#define __SC_STR_ADECL1(t, a) #a
#define __SC_STR_ADECL2(t, a, ...) #a, __SC_STR_ADECL1(__VA_ARGS__)
@@ -134,54 +118,45 @@
#define __SC_STR_TDECL5(t, a, ...) #t, __SC_STR_TDECL4(__VA_ARGS__)
#define __SC_STR_TDECL6(t, a, ...) #t, __SC_STR_TDECL5(__VA_ARGS__)
+extern struct ftrace_event_class event_class_syscall_enter;
+extern struct ftrace_event_class event_class_syscall_exit;
+extern struct trace_event_functions enter_syscall_print_funcs;
+extern struct trace_event_functions exit_syscall_print_funcs;
+
#define SYSCALL_TRACE_ENTER_EVENT(sname) \
- static const struct syscall_metadata __syscall_meta_##sname; \
+ static struct syscall_metadata \
+ __attribute__((__aligned__(4))) __syscall_meta_##sname; \
static struct ftrace_event_call \
__attribute__((__aligned__(4))) event_enter_##sname; \
- static struct trace_event enter_syscall_print_##sname = { \
- .trace = print_syscall_enter, \
- }; \
static struct ftrace_event_call __used \
__attribute__((__aligned__(4))) \
__attribute__((section("_ftrace_events"))) \
event_enter_##sname = { \
.name = "sys_enter"#sname, \
- .system = "syscalls", \
- .event = &enter_syscall_print_##sname, \
- .raw_init = init_syscall_trace, \
- .define_fields = syscall_enter_define_fields, \
- .regfunc = reg_event_syscall_enter, \
- .unregfunc = unreg_event_syscall_enter, \
+ .class = &event_class_syscall_enter, \
+ .event.funcs = &enter_syscall_print_funcs, \
.data = (void *)&__syscall_meta_##sname,\
- TRACE_SYS_ENTER_PERF_INIT(sname) \
}
#define SYSCALL_TRACE_EXIT_EVENT(sname) \
- static const struct syscall_metadata __syscall_meta_##sname; \
+ static struct syscall_metadata \
+ __attribute__((__aligned__(4))) __syscall_meta_##sname; \
static struct ftrace_event_call \
__attribute__((__aligned__(4))) event_exit_##sname; \
- static struct trace_event exit_syscall_print_##sname = { \
- .trace = print_syscall_exit, \
- }; \
static struct ftrace_event_call __used \
__attribute__((__aligned__(4))) \
__attribute__((section("_ftrace_events"))) \
event_exit_##sname = { \
.name = "sys_exit"#sname, \
- .system = "syscalls", \
- .event = &exit_syscall_print_##sname, \
- .raw_init = init_syscall_trace, \
- .define_fields = syscall_exit_define_fields, \
- .regfunc = reg_event_syscall_exit, \
- .unregfunc = unreg_event_syscall_exit, \
+ .class = &event_class_syscall_exit, \
+ .event.funcs = &exit_syscall_print_funcs, \
.data = (void *)&__syscall_meta_##sname,\
- TRACE_SYS_EXIT_PERF_INIT(sname) \
}
#define SYSCALL_METADATA(sname, nb) \
SYSCALL_TRACE_ENTER_EVENT(sname); \
SYSCALL_TRACE_EXIT_EVENT(sname); \
- static const struct syscall_metadata __used \
+ static struct syscall_metadata __used \
__attribute__((__aligned__(4))) \
__attribute__((section("__syscalls_metadata"))) \
__syscall_meta_##sname = { \
@@ -191,12 +166,14 @@
.args = args_##sname, \
.enter_event = &event_enter_##sname, \
.exit_event = &event_exit_##sname, \
+ .enter_fields = LIST_HEAD_INIT(__syscall_meta_##sname.enter_fields), \
+ .exit_fields = LIST_HEAD_INIT(__syscall_meta_##sname.exit_fields), \
};
#define SYSCALL_DEFINE0(sname) \
SYSCALL_TRACE_ENTER_EVENT(_##sname); \
SYSCALL_TRACE_EXIT_EVENT(_##sname); \
- static const struct syscall_metadata __used \
+ static struct syscall_metadata __used \
__attribute__((__aligned__(4))) \
__attribute__((section("__syscalls_metadata"))) \
__syscall_meta__##sname = { \
@@ -204,6 +181,8 @@
.nb_args = 0, \
.enter_event = &event_enter__##sname, \
.exit_event = &event_exit__##sname, \
+ .enter_fields = LIST_HEAD_INIT(__syscall_meta__##sname.enter_fields), \
+ .exit_fields = LIST_HEAD_INIT(__syscall_meta__##sname.exit_fields), \
}; \
asmlinkage long sys_##sname(void)
#else
@@ -312,7 +291,7 @@
cap_user_data_t dataptr);
asmlinkage long sys_capset(cap_user_header_t header,
const cap_user_data_t data);
-asmlinkage long sys_personality(u_long personality);
+asmlinkage long sys_personality(unsigned int personality);
asmlinkage long sys_sigpending(old_sigset_t __user *set);
asmlinkage long sys_sigprocmask(int how, old_sigset_t __user *set,
diff --git a/include/linux/sysrq.h b/include/linux/sysrq.h
index 4496322..609e8ca 100644
--- a/include/linux/sysrq.h
+++ b/include/linux/sysrq.h
@@ -45,6 +45,7 @@
*/
void handle_sysrq(int key, struct tty_struct *tty);
+void __handle_sysrq(int key, struct tty_struct *tty, int check_mask);
int register_sysrq_key(int key, struct sysrq_key_op *op);
int unregister_sysrq_key(int key, struct sysrq_key_op *op);
struct sysrq_key_op *__sysrq_get_key_op(int key);
diff --git a/include/linux/threads.h b/include/linux/threads.h
index 052b12b..383ab95 100644
--- a/include/linux/threads.h
+++ b/include/linux/threads.h
@@ -33,4 +33,13 @@
#define PID_MAX_LIMIT (CONFIG_BASE_SMALL ? PAGE_SIZE * 8 : \
(sizeof(long) > 4 ? 4 * 1024 * 1024 : PID_MAX_DEFAULT))
+/*
+ * Define a minimum number of pids per cpu. Heuristically based
+ * on original pid max of 32k for 32 cpus. Also, increase the
+ * minimum settable value for pid_max on the running system based
+ * on similar defaults. See kernel/pid.c:pidmap_init() for details.
+ */
+#define PIDS_PER_CPU_DEFAULT 1024
+#define PIDS_PER_CPU_MIN 8
+
#endif
diff --git a/include/linux/topology.h b/include/linux/topology.h
index 5b81156..c44df50 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -31,6 +31,7 @@
#include <linux/bitops.h>
#include <linux/mmzone.h>
#include <linux/smp.h>
+#include <linux/percpu.h>
#include <asm/topology.h>
#ifndef node_has_online_mem
@@ -203,8 +204,114 @@
#ifndef SD_NODE_INIT
#error Please define an appropriate SD_NODE_INIT in include/asm/topology.h!!!
#endif
+
#endif /* CONFIG_NUMA */
+#ifdef CONFIG_USE_PERCPU_NUMA_NODE_ID
+DECLARE_PER_CPU(int, numa_node);
+
+#ifndef numa_node_id
+/* Returns the number of the current Node. */
+static inline int numa_node_id(void)
+{
+ return __this_cpu_read(numa_node);
+}
+#endif
+
+#ifndef cpu_to_node
+static inline int cpu_to_node(int cpu)
+{
+ return per_cpu(numa_node, cpu);
+}
+#endif
+
+#ifndef set_numa_node
+static inline void set_numa_node(int node)
+{
+ percpu_write(numa_node, node);
+}
+#endif
+
+#ifndef set_cpu_numa_node
+static inline void set_cpu_numa_node(int cpu, int node)
+{
+ per_cpu(numa_node, cpu) = node;
+}
+#endif
+
+#else /* !CONFIG_USE_PERCPU_NUMA_NODE_ID */
+
+/* Returns the number of the current Node. */
+#ifndef numa_node_id
+static inline int numa_node_id(void)
+{
+ return cpu_to_node(raw_smp_processor_id());
+}
+#endif
+
+#endif /* [!]CONFIG_USE_PERCPU_NUMA_NODE_ID */
+
+#ifdef CONFIG_HAVE_MEMORYLESS_NODES
+
+/*
+ * N.B., Do NOT reference the '_numa_mem_' per cpu variable directly.
+ * It will not be defined when CONFIG_HAVE_MEMORYLESS_NODES is not defined.
+ * Use the accessor functions set_numa_mem(), numa_mem_id() and cpu_to_mem().
+ */
+DECLARE_PER_CPU(int, _numa_mem_);
+
+#ifndef set_numa_mem
+static inline void set_numa_mem(int node)
+{
+ percpu_write(_numa_mem_, node);
+}
+#endif
+
+#ifndef numa_mem_id
+/* Returns the number of the nearest Node with memory */
+static inline int numa_mem_id(void)
+{
+ return __this_cpu_read(_numa_mem_);
+}
+#endif
+
+#ifndef cpu_to_mem
+static inline int cpu_to_mem(int cpu)
+{
+ return per_cpu(_numa_mem_, cpu);
+}
+#endif
+
+#ifndef set_cpu_numa_mem
+static inline void set_cpu_numa_mem(int cpu, int node)
+{
+ per_cpu(_numa_mem_, cpu) = node;
+}
+#endif
+
+#else /* !CONFIG_HAVE_MEMORYLESS_NODES */
+
+static inline void set_numa_mem(int node) {}
+
+static inline void set_cpu_numa_mem(int cpu, int node) {}
+
+#ifndef numa_mem_id
+/* Returns the number of the nearest Node with memory */
+static inline int numa_mem_id(void)
+{
+ return numa_node_id();
+}
+#endif
+
+#ifndef cpu_to_mem
+static inline int cpu_to_mem(int cpu)
+{
+ return cpu_to_node(cpu);
+}
+#endif
+
+#endif /* [!]CONFIG_HAVE_MEMORYLESS_NODES */
+
#ifndef topology_physical_package_id
#define topology_physical_package_id(cpu) ((void)(cpu), -1)
#endif
@@ -218,9 +325,4 @@
#define topology_core_cpumask(cpu) cpumask_of(cpu)
#endif
-/* Returns the number of the current Node. */
-#ifndef numa_node_id
-#define numa_node_id() (cpu_to_node(raw_smp_processor_id()))
-#endif
-
#endif /* _LINUX_TOPOLOGY_H */
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index 1d85f9a..103d1b6 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -14,18 +14,24 @@
* See the file COPYING for more details.
*/
+#include <linux/errno.h>
#include <linux/types.h>
#include <linux/rcupdate.h>
struct module;
struct tracepoint;
+struct tracepoint_func {
+ void *func;
+ void *data;
+};
+
struct tracepoint {
const char *name; /* Tracepoint name */
int state; /* State. */
void (*regfunc)(void);
void (*unregfunc)(void);
- void **funcs;
+ struct tracepoint_func *funcs;
} __attribute__((aligned(32))); /*
* Aligned on 32 bytes because it is
* globally visible and gcc happily
@@ -37,16 +43,19 @@
* Connect a probe to a tracepoint.
* Internal API, should not be used directly.
*/
-extern int tracepoint_probe_register(const char *name, void *probe);
+extern int tracepoint_probe_register(const char *name, void *probe, void *data);
/*
* Disconnect a probe from a tracepoint.
* Internal API, should not be used directly.
*/
-extern int tracepoint_probe_unregister(const char *name, void *probe);
+extern int
+tracepoint_probe_unregister(const char *name, void *probe, void *data);
-extern int tracepoint_probe_register_noupdate(const char *name, void *probe);
-extern int tracepoint_probe_unregister_noupdate(const char *name, void *probe);
+extern int tracepoint_probe_register_noupdate(const char *name, void *probe,
+ void *data);
+extern int tracepoint_probe_unregister_noupdate(const char *name, void *probe,
+ void *data);
extern void tracepoint_probe_update_all(void);
struct tracepoint_iter {
@@ -102,17 +111,27 @@
/*
* it_func[0] is never NULL because there is at least one element in the array
* when the array itself is non NULL.
+ *
+ * Note, the proto and args passed in includes "__data" as the first parameter.
+ * The reason for this is to handle the "void" prototype. If a tracepoint
+ * has a "void" prototype, then it is invalid to declare a function
+ * as "(void *, void)". The DECLARE_TRACE_NOARGS() will pass in just
+ * "void *data", where as the DECLARE_TRACE() will pass in "void *data, proto".
*/
#define __DO_TRACE(tp, proto, args) \
do { \
- void **it_func; \
+ struct tracepoint_func *it_func_ptr; \
+ void *it_func; \
+ void *__data; \
\
rcu_read_lock_sched_notrace(); \
- it_func = rcu_dereference_sched((tp)->funcs); \
- if (it_func) { \
+ it_func_ptr = rcu_dereference_sched((tp)->funcs); \
+ if (it_func_ptr) { \
do { \
- ((void(*)(proto))(*it_func))(args); \
- } while (*(++it_func)); \
+ it_func = (it_func_ptr)->func; \
+ __data = (it_func_ptr)->data; \
+ ((void(*)(proto))(it_func))(args); \
+ } while ((++it_func_ptr)->func); \
} \
rcu_read_unlock_sched_notrace(); \
} while (0)
@@ -122,24 +141,32 @@
* not add unwanted padding between the beginning of the section and the
* structure. Force alignment to the same alignment as the section start.
*/
-#define DECLARE_TRACE(name, proto, args) \
+#define __DECLARE_TRACE(name, proto, args, data_proto, data_args) \
extern struct tracepoint __tracepoint_##name; \
static inline void trace_##name(proto) \
{ \
if (unlikely(__tracepoint_##name.state)) \
__DO_TRACE(&__tracepoint_##name, \
- TP_PROTO(proto), TP_ARGS(args)); \
+ TP_PROTO(data_proto), \
+ TP_ARGS(data_args)); \
} \
- static inline int register_trace_##name(void (*probe)(proto)) \
+ static inline int \
+ register_trace_##name(void (*probe)(data_proto), void *data) \
{ \
- return tracepoint_probe_register(#name, (void *)probe); \
+ return tracepoint_probe_register(#name, (void *)probe, \
+ data); \
} \
- static inline int unregister_trace_##name(void (*probe)(proto)) \
+ static inline int \
+ unregister_trace_##name(void (*probe)(data_proto), void *data) \
{ \
- return tracepoint_probe_unregister(#name, (void *)probe);\
+ return tracepoint_probe_unregister(#name, (void *)probe, \
+ data); \
+ } \
+ static inline void \
+ check_trace_callback_type_##name(void (*cb)(data_proto)) \
+ { \
}
-
#define DEFINE_TRACE_FN(name, reg, unreg) \
static const char __tpstrtab_##name[] \
__attribute__((section("__tracepoints_strings"))) = #name; \
@@ -156,18 +183,23 @@
EXPORT_SYMBOL(__tracepoint_##name)
#else /* !CONFIG_TRACEPOINTS */
-#define DECLARE_TRACE(name, proto, args) \
- static inline void _do_trace_##name(struct tracepoint *tp, proto) \
- { } \
+#define __DECLARE_TRACE(name, proto, args, data_proto, data_args) \
static inline void trace_##name(proto) \
{ } \
- static inline int register_trace_##name(void (*probe)(proto)) \
+ static inline int \
+ register_trace_##name(void (*probe)(data_proto), \
+ void *data) \
{ \
return -ENOSYS; \
} \
- static inline int unregister_trace_##name(void (*probe)(proto)) \
+ static inline int \
+ unregister_trace_##name(void (*probe)(data_proto), \
+ void *data) \
{ \
return -ENOSYS; \
+ } \
+ static inline void check_trace_callback_type_##name(void (*cb)(data_proto)) \
+ { \
}
#define DEFINE_TRACE_FN(name, reg, unreg)
@@ -176,6 +208,29 @@
#define EXPORT_TRACEPOINT_SYMBOL(name)
#endif /* CONFIG_TRACEPOINTS */
+
+/*
+ * The need for the DECLARE_TRACE_NOARGS() is to handle the prototype
+ * (void). "void" is a special value in a function prototype and can
+ * not be combined with other arguments. Since the DECLARE_TRACE()
+ * macro adds a data element at the beginning of the prototype,
+ * we need a way to differentiate "(void *data, proto)" from
+ * "(void *data, void)". The second prototype is invalid.
+ *
+ * DECLARE_TRACE_NOARGS() passes "void" as the tracepoint prototype
+ * and "void *__data" as the callback prototype.
+ *
+ * DECLARE_TRACE() passes "proto" as the tracepoint protoype and
+ * "void *__data, proto" as the callback prototype.
+ */
+#define DECLARE_TRACE_NOARGS(name) \
+ __DECLARE_TRACE(name, void, , void *__data, __data)
+
+#define DECLARE_TRACE(name, proto, args) \
+ __DECLARE_TRACE(name, PARAMS(proto), PARAMS(args), \
+ PARAMS(void *__data, proto), \
+ PARAMS(__data, args))
+
#endif /* DECLARE_TRACE */
#ifndef TRACE_EVENT
diff --git a/include/linux/uinput.h b/include/linux/uinput.h
index 15ddd44..60c81da 100644
--- a/include/linux/uinput.h
+++ b/include/linux/uinput.h
@@ -166,11 +166,11 @@
struct uinput_user_dev {
char name[UINPUT_MAX_NAME_SIZE];
struct input_id id;
- int ff_effects_max;
- int absmax[ABS_MAX + 1];
- int absmin[ABS_MAX + 1];
- int absfuzz[ABS_MAX + 1];
- int absflat[ABS_MAX + 1];
+ int ff_effects_max;
+ int absmax[ABS_CNT];
+ int absmin[ABS_CNT];
+ int absfuzz[ABS_CNT];
+ int absflat[ABS_CNT];
};
#endif /* __UINPUT_H_ */
diff --git a/include/linux/usb/audio-v2.h b/include/linux/usb/audio-v2.h
index 2389f93..383b94b 100644
--- a/include/linux/usb/audio-v2.h
+++ b/include/linux/usb/audio-v2.h
@@ -18,6 +18,16 @@
/* v1.0 and v2.0 of this standard have many things in common. For the rest
* of the definitions, please refer to audio.h */
+static inline bool uac2_control_is_readable(u32 bmControls, u8 control)
+{
+ return (bmControls >> (control * 2)) & 0x1;
+}
+
+static inline bool uac2_control_is_writeable(u32 bmControls, u8 control)
+{
+ return (bmControls >> (control * 2)) & 0x2;
+}
+
/* 4.7.2.1 Clock Source Descriptor */
struct uac_clock_source_descriptor {
@@ -31,6 +41,13 @@
__u8 iClockSource;
} __attribute__((packed));
+/* bmAttribute fields */
+#define UAC_CLOCK_SOURCE_TYPE_EXT 0x0
+#define UAC_CLOCK_SOURCE_TYPE_INT_FIXED 0x1
+#define UAC_CLOCK_SOURCE_TYPE_INT_VAR 0x2
+#define UAC_CLOCK_SOURCE_TYPE_INT_PROG 0x3
+#define UAC_CLOCK_SOURCE_SYNCED_TO_SOF (1 << 2)
+
/* 4.7.2.2 Clock Source Descriptor */
struct uac_clock_selector_descriptor {
@@ -39,8 +56,20 @@
__u8 bDescriptorSubtype;
__u8 bClockID;
__u8 bNrInPins;
- __u8 bmControls;
__u8 baCSourceID[];
+ /* bmControls, bAssocTerminal and iClockSource omitted */
+} __attribute__((packed));
+
+/* 4.7.2.3 Clock Multiplier Descriptor */
+
+struct uac_clock_multiplier_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bClockID;
+ __u8 bCSourceID;
+ __u8 bmControls;
+ __u8 iClockMultiplier;
} __attribute__((packed));
/* 4.7.2.4 Input terminal descriptor */
@@ -105,6 +134,22 @@
__u8 iChannelNames;
} __attribute__((packed));
+/* 4.10.1.2 Class-Specific AS Isochronous Audio Data Endpoint Descriptor */
+
+struct uac2_iso_endpoint_descriptor {
+ __u8 bLength; /* in bytes: 8 */
+ __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */
+ __u8 bDescriptorSubtype; /* EP_GENERAL */
+ __u8 bmAttributes;
+ __u8 bmControls;
+ __u8 bLockDelayUnits;
+ __le16 wLockDelay;
+} __attribute__((packed));
+
+#define UAC2_CONTROL_PITCH (3 << 0)
+#define UAC2_CONTROL_DATA_OVERRUN (3 << 2)
+#define UAC2_CONTROL_DATA_UNDERRUN (3 << 4)
+
/* 6.1 Interrupt Data Message */
#define UAC2_INTERRUPT_DATA_MSG_VENDOR (1 << 0)
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
index 5d646c3..c51200c 100644
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -47,6 +47,15 @@
#define UAC_FORMAT_TYPE 0x02
#define UAC_FORMAT_SPECIFIC 0x03
+/* A.7 Processing Unit Process Types */
+#define UAC_PROCESS_UNDEFINED 0x00
+#define UAC_PROCESS_UP_DOWNMIX 0x01
+#define UAC_PROCESS_DOLBY_PROLOGIC 0x02
+#define UAC_PROCESS_STEREO_EXTENDER 0x03
+#define UAC_PROCESS_REVERB 0x04
+#define UAC_PROCESS_CHORUS 0x05
+#define UAC_PROCESS_DYN_RANGE_COMP 0x06
+
/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */
#define UAC_EP_GENERAL 0x01
@@ -73,6 +82,60 @@
#define UAC_GET_STAT 0xff
+/* A.10 Control Selector Codes */
+
+/* A.10.1 Terminal Control Selectors */
+#define UAC_TERM_COPY_PROTECT 0x01
+
+/* A.10.2 Feature Unit Control Selectors */
+#define UAC_FU_MUTE 0x01
+#define UAC_FU_VOLUME 0x02
+#define UAC_FU_BASS 0x03
+#define UAC_FU_MID 0x04
+#define UAC_FU_TREBLE 0x05
+#define UAC_FU_GRAPHIC_EQUALIZER 0x06
+#define UAC_FU_AUTOMATIC_GAIN 0x07
+#define UAC_FU_DELAY 0x08
+#define UAC_FU_BASS_BOOST 0x09
+#define UAC_FU_LOUDNESS 0x0a
+
+#define UAC_CONTROL_BIT(CS) (1 << ((CS) - 1))
+
+/* A.10.3.1 Up/Down-mix Processing Unit Controls Selectors */
+#define UAC_UD_ENABLE 0x01
+#define UAC_UD_MODE_SELECT 0x02
+
+/* A.10.3.2 Dolby Prologic (tm) Processing Unit Controls Selectors */
+#define UAC_DP_ENABLE 0x01
+#define UAC_DP_MODE_SELECT 0x02
+
+/* A.10.3.3 3D Stereo Extender Processing Unit Control Selectors */
+#define UAC_3D_ENABLE 0x01
+#define UAC_3D_SPACE 0x02
+
+/* A.10.3.4 Reverberation Processing Unit Control Selectors */
+#define UAC_REVERB_ENABLE 0x01
+#define UAC_REVERB_LEVEL 0x02
+#define UAC_REVERB_TIME 0x03
+#define UAC_REVERB_FEEDBACK 0x04
+
+/* A.10.3.5 Chorus Processing Unit Control Selectors */
+#define UAC_CHORUS_ENABLE 0x01
+#define UAC_CHORUS_LEVEL 0x02
+#define UAC_CHORUS_RATE 0x03
+#define UAC_CHORUS_DEPTH 0x04
+
+/* A.10.3.6 Dynamic Range Compressor Unit Control Selectors */
+#define UAC_DCR_ENABLE 0x01
+#define UAC_DCR_RATE 0x02
+#define UAC_DCR_MAXAMPL 0x03
+#define UAC_DCR_THRESHOLD 0x04
+#define UAC_DCR_ATTACK_TIME 0x05
+#define UAC_DCR_RELEASE_TIME 0x06
+
+/* A.10.4 Extension Unit Control Selectors */
+#define UAC_XU_ENABLE 0x01
+
/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */
#define UAC_MS_HEADER 0x01
#define UAC_MIDI_IN_JACK 0x02
@@ -244,7 +307,7 @@
static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc)
{
__u8 *raw = (__u8 *) desc;
- return raw[9 + desc->bLength - 1];
+ return raw[desc->bLength - 1];
}
/* 4.3.2.5 Feature Unit Descriptor */
@@ -463,31 +526,6 @@
#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02
#define UAC_EP_CS_ATTR_FILL_MAX 0x80
-/* A.10.2 Feature Unit Control Selectors */
-
-#define UAC_FU_CONTROL_UNDEFINED 0x00
-#define UAC_MUTE_CONTROL 0x01
-#define UAC_VOLUME_CONTROL 0x02
-#define UAC_BASS_CONTROL 0x03
-#define UAC_MID_CONTROL 0x04
-#define UAC_TREBLE_CONTROL 0x05
-#define UAC_GRAPHIC_EQUALIZER_CONTROL 0x06
-#define UAC_AUTOMATIC_GAIN_CONTROL 0x07
-#define UAC_DELAY_CONTROL 0x08
-#define UAC_BASS_BOOST_CONTROL 0x09
-#define UAC_LOUDNESS_CONTROL 0x0a
-
-#define UAC_FU_MUTE (1 << (UAC_MUTE_CONTROL - 1))
-#define UAC_FU_VOLUME (1 << (UAC_VOLUME_CONTROL - 1))
-#define UAC_FU_BASS (1 << (UAC_BASS_CONTROL - 1))
-#define UAC_FU_MID (1 << (UAC_MID_CONTROL - 1))
-#define UAC_FU_TREBLE (1 << (UAC_TREBLE_CONTROL - 1))
-#define UAC_FU_GRAPHIC_EQ (1 << (UAC_GRAPHIC_EQUALIZER_CONTROL - 1))
-#define UAC_FU_AUTO_GAIN (1 << (UAC_AUTOMATIC_GAIN_CONTROL - 1))
-#define UAC_FU_DELAY (1 << (UAC_DELAY_CONTROL - 1))
-#define UAC_FU_BASS_BOOST (1 << (UAC_BASS_BOOST_CONTROL - 1))
-#define UAC_FU_LOUDNESS (1 << (UAC_LOUDNESS_CONTROL - 1))
-
/* status word format (3.7.1.1) */
#define UAC1_STATUS_TYPE_ORIG_MASK 0x0f
diff --git a/include/linux/uuid.h b/include/linux/uuid.h
new file mode 100644
index 0000000..5b7efbf
--- /dev/null
+++ b/include/linux/uuid.h
@@ -0,0 +1,70 @@
+/*
+ * UUID/GUID definition
+ *
+ * Copyright (C) 2010, Intel Corp.
+ * Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation;
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _LINUX_UUID_H_
+#define _LINUX_UUID_H_
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+typedef struct {
+ __u8 b[16];
+} uuid_le;
+
+typedef struct {
+ __u8 b[16];
+} uuid_be;
+
+#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \
+((uuid_le) \
+{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
+ (b) & 0xff, ((b) >> 8) & 0xff, \
+ (c) & 0xff, ((c) >> 8) & 0xff, \
+ (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
+
+#define UUID_BE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \
+((uuid_be) \
+{{ ((a) >> 24) & 0xff, ((a) >> 16) & 0xff, ((a) >> 8) & 0xff, (a) & 0xff, \
+ ((b) >> 8) & 0xff, (b) & 0xff, \
+ ((c) >> 8) & 0xff, (c) & 0xff, \
+ (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
+
+#define NULL_UUID_LE \
+ UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00)
+
+#define NULL_UUID_BE \
+ UUID_BE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00)
+
+static inline int uuid_le_cmp(const uuid_le u1, const uuid_le u2)
+{
+ return memcmp(&u1, &u2, sizeof(uuid_le));
+}
+
+static inline int uuid_be_cmp(const uuid_be u1, const uuid_be u2)
+{
+ return memcmp(&u1, &u2, sizeof(uuid_be));
+}
+
+extern void uuid_le_gen(uuid_le *u);
+extern void uuid_be_gen(uuid_be *u);
+
+#endif
diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h
index 2dfaa29..814f294 100644
--- a/include/linux/vgaarb.h
+++ b/include/linux/vgaarb.h
@@ -5,9 +5,31 @@
* (C) Copyright 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
* (C) Copyright 2007 Paulo R. Zanoni <przanoni@gmail.com>
* (C) Copyright 2007, 2009 Tiago Vignatti <vignatti@freedesktop.org>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS
+ * IN THE SOFTWARE.
+ *
*/
#ifndef LINUX_VGA_H
+#define LINUX_VGA_H
#include <asm/vga.h>
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index cc97d6c..c24eca7 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -27,10 +27,6 @@
* in a manner such that unspecified fields are set to zero.
*/
struct writeback_control {
- struct backing_dev_info *bdi; /* If !NULL, only write back this
- queue */
- struct super_block *sb; /* if !NULL, only write inodes from
- this super_block */
enum writeback_sync_modes sync_mode;
unsigned long *older_than_this; /* If !NULL, only write back inodes
older than this */
@@ -56,24 +52,6 @@
unsigned for_reclaim:1; /* Invoked from the page allocator */
unsigned range_cyclic:1; /* range_start is cyclic */
unsigned more_io:1; /* more io to be dispatched */
- /*
- * write_cache_pages() won't update wbc->nr_to_write and
- * mapping->writeback_index if no_nrwrite_index_update
- * is set. write_cache_pages() may write more than we
- * requested and we want to make sure nr_to_write and
- * writeback_index are updated in a consistent manner
- * so we use a single control to update them
- */
- unsigned no_nrwrite_index_update:1;
-
- /*
- * For WB_SYNC_ALL, the sb must always be pinned. For WB_SYNC_NONE,
- * the writeback code will pin the sb for the caller. However,
- * for eg umount, the caller does WB_SYNC_NONE but already has
- * the sb pinned. If the below is set, caller already has the
- * sb pinned.
- */
- unsigned sb_pinned:1;
};
/*
@@ -82,10 +60,10 @@
struct bdi_writeback;
int inode_wait(void *);
void writeback_inodes_sb(struct super_block *);
-void writeback_inodes_sb_locked(struct super_block *);
int writeback_inodes_sb_if_idle(struct super_block *);
void sync_inodes_sb(struct super_block *);
-void writeback_inodes_wbc(struct writeback_control *wbc);
+void writeback_inodes_wb(struct bdi_writeback *wb,
+ struct writeback_control *wbc);
long wb_do_writeback(struct bdi_writeback *wb, int force_wait);
void wakeup_flusher_threads(long nr_pages);
diff --git a/include/math-emu/op-common.h b/include/math-emu/op-common.h
index fd88226..9696a5e 100644
--- a/include/math-emu/op-common.h
+++ b/include/math-emu/op-common.h
@@ -799,7 +799,7 @@
X##_e -= (_FP_W_TYPE_SIZE - rsize); \
X##_e = rsize - X##_e - 1; \
\
- if (_FP_FRACBITS_##fs < rsize && _FP_WFRACBITS_##fs < X##_e) \
+ if (_FP_FRACBITS_##fs < rsize && _FP_WFRACBITS_##fs <= X##_e) \
__FP_FRAC_SRS_1(ur_, (X##_e - _FP_WFRACBITS_##fs + 1), rsize);\
_FP_FRAC_DISASSEMBLE_##wc(X, ur_, rsize); \
if ((_FP_WFRACBITS_##fs - X##_e - 1) > 0) \
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 5833966..c78e99a 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -55,7 +55,8 @@
#define RC_MAP_AVERMEDIA_A16D "rc-avermedia-a16d"
#define RC_MAP_AVERMEDIA_CARDBUS "rc-avermedia-cardbus"
#define RC_MAP_AVERMEDIA_DVBT "rc-avermedia-dvbt"
-#define RC_MAP_AVERMEDIA_M135A_RM_JX "rc-avermedia-m135a-rm-jx"
+#define RC_MAP_AVERMEDIA_M135A "rc-avermedia-m135a"
+#define RC_MAP_AVERMEDIA_M733A_RM_K6 "rc-avermedia-m733a-rm-k6"
#define RC_MAP_AVERMEDIA "rc-avermedia"
#define RC_MAP_AVERTV_303 "rc-avertv-303"
#define RC_MAP_BEHOLD_COLUMBUS "rc-behold-columbus"
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index c9a5bbf..b8289c2 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -66,7 +66,7 @@
* .get_formats() fail, .put_formats() will not be called at all, the
* failing .get_formats() must then clean up internally.
*/
- int (*get_formats)(struct soc_camera_device *, int,
+ int (*get_formats)(struct soc_camera_device *, unsigned int,
struct soc_camera_format_xlate *);
void (*put_formats)(struct soc_camera_device *);
int (*cropcap)(struct soc_camera_device *, struct v4l2_cropcap *);
diff --git a/include/media/tuner.h b/include/media/tuner.h
index 5505c53..51811eac 100644
--- a/include/media/tuner.h
+++ b/include/media/tuner.h
@@ -130,6 +130,7 @@
#define TUNER_PHILIPS_CU1216L 82
#define TUNER_NXP_TDA18271 83
#define TUNER_SONY_BTF_PXN01Z 84
+#define TUNER_PHILIPS_FQ1236_MK5 85 /* NTSC, TDA9885, no FM radio */
/* tv card specific */
#define TDA9887_PRESENT (1<<0)
diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
index 0dbe02a..865cda7 100644
--- a/include/media/v4l2-mediabus.h
+++ b/include/media/v4l2-mediabus.h
@@ -40,6 +40,7 @@
V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_LE,
V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE,
V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_BE,
+ V4L2_MBUS_FMT_SGRBG8_1X8,
};
/**
@@ -58,4 +59,24 @@
enum v4l2_colorspace colorspace;
};
+static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt,
+ const struct v4l2_mbus_framefmt *mbus_fmt)
+{
+ pix_fmt->width = mbus_fmt->width;
+ pix_fmt->height = mbus_fmt->height;
+ pix_fmt->field = mbus_fmt->field;
+ pix_fmt->colorspace = mbus_fmt->colorspace;
+}
+
+static inline void v4l2_fill_mbus_format(struct v4l2_mbus_framefmt *mbus_fmt,
+ const struct v4l2_pix_format *pix_fmt,
+ enum v4l2_mbus_pixelcode code)
+{
+ mbus_fmt->width = pix_fmt->width;
+ mbus_fmt->height = pix_fmt->height;
+ mbus_fmt->field = pix_fmt->field;
+ mbus_fmt->colorspace = pix_fmt->colorspace;
+ mbus_fmt->code = code;
+}
+
#endif
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index a888893..02c6f4d 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -246,7 +246,7 @@
struct v4l2_dv_timings *timings);
int (*g_dv_timings)(struct v4l2_subdev *sd,
struct v4l2_dv_timings *timings);
- int (*enum_mbus_fmt)(struct v4l2_subdev *sd, int index,
+ int (*enum_mbus_fmt)(struct v4l2_subdev *sd, unsigned int index,
enum v4l2_mbus_pixelcode *code);
int (*g_mbus_fmt)(struct v4l2_subdev *sd,
struct v4l2_mbus_framefmt *fmt);
diff --git a/include/net/cls_cgroup.h b/include/net/cls_cgroup.h
index 6cf4486..726cc35 100644
--- a/include/net/cls_cgroup.h
+++ b/include/net/cls_cgroup.h
@@ -39,7 +39,7 @@
static inline u32 task_cls_classid(struct task_struct *p)
{
int id;
- u32 classid;
+ u32 classid = 0;
if (in_interrupt())
return 0;
diff --git a/include/net/dst.h b/include/net/dst.h
index 612069b..81d1413 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -250,11 +250,11 @@
* Linux networking. Thus, destinations are stackable.
*/
-static inline struct dst_entry *dst_pop(struct dst_entry *dst)
+static inline struct dst_entry *skb_dst_pop(struct sk_buff *skb)
{
- struct dst_entry *child = dst_clone(dst->child);
+ struct dst_entry *child = skb_dst(skb)->child;
- dst_release(dst);
+ skb_dst_drop(skb);
return child;
}
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index 03ca5d8..433604b 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -313,12 +313,24 @@
extern void tcf_destroy(struct tcf_proto *tp);
extern void tcf_destroy_chain(struct tcf_proto **fl);
-/* Reset all TX qdiscs of a device. */
+/* Reset all TX qdiscs greater then index of a device. */
+static inline void qdisc_reset_all_tx_gt(struct net_device *dev, unsigned int i)
+{
+ struct Qdisc *qdisc;
+
+ for (; i < dev->num_tx_queues; i++) {
+ qdisc = netdev_get_tx_queue(dev, i)->qdisc;
+ if (qdisc) {
+ spin_lock_bh(qdisc_lock(qdisc));
+ qdisc_reset(qdisc);
+ spin_unlock_bh(qdisc_lock(qdisc));
+ }
+ }
+}
+
static inline void qdisc_reset_all_tx(struct net_device *dev)
{
- unsigned int i;
- for (i = 0; i < dev->num_tx_queues; i++)
- qdisc_reset(netdev_get_tx_queue(dev, i)->qdisc);
+ qdisc_reset_all_tx_gt(dev, 0);
}
/* Are all TX queues of the device empty? */
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 6173c61..4b86011 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -876,7 +876,7 @@
/* Reference counting. */
atomic_t refcnt;
- int dead:1,
+ __u32 dead:1,
/* RTO-Pending : A flag used to track if one of the DATA
* chunks sent to this address is currently being
* used to compute a RTT. If this flag is 0,
diff --git a/include/net/snmp.h b/include/net/snmp.h
index 92456f1..899003d 100644
--- a/include/net/snmp.h
+++ b/include/net/snmp.h
@@ -134,7 +134,7 @@
#define SNMP_ADD_STATS_USER(mib, field, addend) \
this_cpu_add(mib[1]->mibs[field], addend)
#define SNMP_ADD_STATS(mib, field, addend) \
- this_cpu_add(mib[0]->mibs[field], addend)
+ this_cpu_add(mib[!in_softirq()]->mibs[field], addend)
/*
* Use "__typeof__(*mib[0]) *ptr" instead of "__typeof__(mib[0]) ptr"
* to make @ptr a non-percpu pointer.
diff --git a/include/net/sock.h b/include/net/sock.h
index d2a71b0..0a691ea 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1026,15 +1026,23 @@
SINGLE_DEPTH_NESTING)
#define bh_unlock_sock(__sk) spin_unlock(&((__sk)->sk_lock.slock))
-static inline void lock_sock_bh(struct sock *sk)
+extern bool lock_sock_fast(struct sock *sk);
+/**
+ * unlock_sock_fast - complement of lock_sock_fast
+ * @sk: socket
+ * @slow: slow mode
+ *
+ * fast unlock socket for user context.
+ * If slow mode is on, we call regular release_sock()
+ */
+static inline void unlock_sock_fast(struct sock *sk, bool slow)
{
- spin_lock_bh(&sk->sk_lock.slock);
+ if (slow)
+ release_sock(sk);
+ else
+ spin_unlock_bh(&sk->sk_lock.slock);
}
-static inline void unlock_sock_bh(struct sock *sk)
-{
- spin_unlock_bh(&sk->sk_lock.slock);
-}
extern struct sock *sk_alloc(struct net *net, int family,
gfp_t priority,
@@ -1216,12 +1224,7 @@
static inline int sk_tx_queue_get(const struct sock *sk)
{
- return sk->sk_tx_queue_mapping;
-}
-
-static inline bool sk_tx_queue_recorded(const struct sock *sk)
-{
- return (sk && sk->sk_tx_queue_mapping >= 0);
+ return sk ? sk->sk_tx_queue_mapping : -1;
}
static inline void sk_set_socket(struct sock *sk, struct socket *sock)
@@ -1516,20 +1519,7 @@
extern int sock_queue_rcv_skb(struct sock *sk, struct sk_buff *skb);
-static inline int sock_queue_err_skb(struct sock *sk, struct sk_buff *skb)
-{
- /* Cast skb->rcvbuf to unsigned... It's pointless, but reduces
- number of warnings when compiling with -W --ANK
- */
- if (atomic_read(&sk->sk_rmem_alloc) + skb->truesize >=
- (unsigned)sk->sk_rcvbuf)
- return -ENOMEM;
- skb_set_owner_r(skb, sk);
- skb_queue_tail(&sk->sk_error_queue, skb);
- if (!sock_flag(sk, SOCK_DEAD))
- sk->sk_data_ready(sk, skb->len);
- return 0;
-}
+extern int sock_queue_err_skb(struct sock *sk, struct sk_buff *skb);
/*
* Recover an error report and clear atomically
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 1913af6..fc8f36d 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -1586,7 +1586,7 @@
static inline int xfrm_mark_get(struct nlattr **attrs, struct xfrm_mark *m)
{
if (attrs[XFRMA_MARK])
- memcpy(m, nla_data(attrs[XFRMA_MARK]), sizeof(m));
+ memcpy(m, nla_data(attrs[XFRMA_MARK]), sizeof(struct xfrm_mark));
else
m->v = m->m = 0;
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index c50a97f..b7bdecb 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -327,6 +327,14 @@
sector_t, int []);
/*
+ * This function is called when one or more partitions on the
+ * device reach beyond the end of the device.
+ *
+ * Status: OPTIONAL
+ */
+ void (*unlock_native_capacity)(struct scsi_device *);
+
+ /*
* Can be used to export driver statistics and other infos to the
* world outside the kernel ie. userspace and it also provides an
* interface to feed the driver with information.
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
index 2aa6aa3..f3865c7 100644
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -306,7 +306,6 @@
__field( int, pages_written )
__field( long, pages_skipped )
__field( char, more_io )
- __field( char, no_nrwrite_index_update )
__field( pgoff_t, writeback_index )
),
@@ -317,16 +316,14 @@
__entry->pages_written = pages_written;
__entry->pages_skipped = wbc->pages_skipped;
__entry->more_io = wbc->more_io;
- __entry->no_nrwrite_index_update = wbc->no_nrwrite_index_update;
__entry->writeback_index = inode->i_mapping->writeback_index;
),
- TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld more_io %d no_nrwrite_index_update %d writeback_index %lu",
+ TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld more_io %d writeback_index %lu",
jbd2_dev_to_name(__entry->dev),
(unsigned long) __entry->ino, __entry->ret,
__entry->pages_written, __entry->pages_skipped,
__entry->more_io,
- __entry->no_nrwrite_index_update,
(unsigned long) __entry->writeback_index)
);
@@ -353,7 +350,7 @@
jbd2_dev_to_name(__entry->dev), __entry->blk, __entry->count)
);
-TRACE_EVENT(ext4_mb_new_inode_pa,
+DECLARE_EVENT_CLASS(ext4__mb_new_pa,
TP_PROTO(struct ext4_allocation_context *ac,
struct ext4_prealloc_space *pa),
@@ -381,32 +378,20 @@
__entry->pa_pstart, __entry->pa_len, __entry->pa_lstart)
);
-TRACE_EVENT(ext4_mb_new_group_pa,
+DEFINE_EVENT(ext4__mb_new_pa, ext4_mb_new_inode_pa,
+
TP_PROTO(struct ext4_allocation_context *ac,
struct ext4_prealloc_space *pa),
- TP_ARGS(ac, pa),
+ TP_ARGS(ac, pa)
+);
- TP_STRUCT__entry(
- __field( dev_t, dev )
- __field( ino_t, ino )
- __field( __u64, pa_pstart )
- __field( __u32, pa_len )
- __field( __u64, pa_lstart )
+DEFINE_EVENT(ext4__mb_new_pa, ext4_mb_new_group_pa,
- ),
+ TP_PROTO(struct ext4_allocation_context *ac,
+ struct ext4_prealloc_space *pa),
- TP_fast_assign(
- __entry->dev = ac->ac_sb->s_dev;
- __entry->ino = ac->ac_inode->i_ino;
- __entry->pa_pstart = pa->pa_pstart;
- __entry->pa_len = pa->pa_len;
- __entry->pa_lstart = pa->pa_lstart;
- ),
-
- TP_printk("dev %s ino %lu pstart %llu len %u lstart %llu",
- jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
- __entry->pa_pstart, __entry->pa_len, __entry->pa_lstart)
+ TP_ARGS(ac, pa)
);
TRACE_EVENT(ext4_mb_release_inode_pa,
@@ -618,9 +603,9 @@
);
TRACE_EVENT(ext4_sync_file,
- TP_PROTO(struct file *file, struct dentry *dentry, int datasync),
+ TP_PROTO(struct file *file, int datasync),
- TP_ARGS(file, dentry, datasync),
+ TP_ARGS(file, datasync),
TP_STRUCT__entry(
__field( dev_t, dev )
@@ -630,6 +615,8 @@
),
TP_fast_assign(
+ struct dentry *dentry = file->f_path.dentry;
+
__entry->dev = dentry->d_inode->i_sb->s_dev;
__entry->ino = dentry->d_inode->i_ino;
__entry->datasync = datasync;
@@ -790,7 +777,7 @@
__entry->result_len, __entry->result_logical)
);
-TRACE_EVENT(ext4_mballoc_discard,
+DECLARE_EVENT_CLASS(ext4__mballoc,
TP_PROTO(struct ext4_allocation_context *ac),
TP_ARGS(ac),
@@ -819,33 +806,18 @@
__entry->result_len, __entry->result_logical)
);
-TRACE_EVENT(ext4_mballoc_free,
+DEFINE_EVENT(ext4__mballoc, ext4_mballoc_discard,
+
TP_PROTO(struct ext4_allocation_context *ac),
- TP_ARGS(ac),
+ TP_ARGS(ac)
+);
- TP_STRUCT__entry(
- __field( dev_t, dev )
- __field( ino_t, ino )
- __field( __u32, result_logical )
- __field( int, result_start )
- __field( __u32, result_group )
- __field( int, result_len )
- ),
+DEFINE_EVENT(ext4__mballoc, ext4_mballoc_free,
- TP_fast_assign(
- __entry->dev = ac->ac_inode->i_sb->s_dev;
- __entry->ino = ac->ac_inode->i_ino;
- __entry->result_logical = ac->ac_b_ex.fe_logical;
- __entry->result_start = ac->ac_b_ex.fe_start;
- __entry->result_group = ac->ac_b_ex.fe_group;
- __entry->result_len = ac->ac_b_ex.fe_len;
- ),
+ TP_PROTO(struct ext4_allocation_context *ac),
- TP_printk("dev %s inode %lu extent %u/%d/%u@%u ",
- jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
- __entry->result_group, __entry->result_start,
- __entry->result_len, __entry->result_logical)
+ TP_ARGS(ac)
);
TRACE_EVENT(ext4_forget,
@@ -974,6 +946,39 @@
__entry->reserved_meta_blocks, __entry->allocated_meta_blocks)
);
+DECLARE_EVENT_CLASS(ext4__bitmap_load,
+ TP_PROTO(struct super_block *sb, unsigned long group),
+
+ TP_ARGS(sb, group),
+
+ TP_STRUCT__entry(
+ __field( dev_t, dev )
+ __field( __u32, group )
+
+ ),
+
+ TP_fast_assign(
+ __entry->dev = sb->s_dev;
+ __entry->group = group;
+ ),
+
+ TP_printk("dev %s group %u",
+ jbd2_dev_to_name(__entry->dev), __entry->group)
+);
+
+DEFINE_EVENT(ext4__bitmap_load, ext4_mb_bitmap_load,
+
+ TP_PROTO(struct super_block *sb, unsigned long group),
+
+ TP_ARGS(sb, group)
+);
+
+DEFINE_EVENT(ext4__bitmap_load, ext4_mb_buddy_bitmap_load,
+
+ TP_PROTO(struct super_block *sb, unsigned long group),
+
+ TP_ARGS(sb, group)
+);
#endif /* _TRACE_EXT4_H */
diff --git a/include/trace/events/sched.h b/include/trace/events/sched.h
index 4f733ec..b9e1dd6 100644
--- a/include/trace/events/sched.h
+++ b/include/trace/events/sched.h
@@ -115,6 +115,23 @@
TP_PROTO(struct task_struct *p, int success),
TP_ARGS(p, success));
+#ifdef CREATE_TRACE_POINTS
+static inline long __trace_sched_switch_state(struct task_struct *p)
+{
+ long state = p->state;
+
+#ifdef CONFIG_PREEMPT
+ /*
+ * For all intents and purposes a preempted task is a running task.
+ */
+ if (task_thread_info(p)->preempt_count & PREEMPT_ACTIVE)
+ state = TASK_RUNNING;
+#endif
+
+ return state;
+}
+#endif
+
/*
* Tracepoint for task switches, performed by the scheduler:
*/
@@ -139,7 +156,7 @@
memcpy(__entry->next_comm, next->comm, TASK_COMM_LEN);
__entry->prev_pid = prev->pid;
__entry->prev_prio = prev->prio;
- __entry->prev_state = prev->state;
+ __entry->prev_state = __trace_sched_switch_state(prev);
memcpy(__entry->prev_comm, prev->comm, TASK_COMM_LEN);
__entry->next_pid = next->pid;
__entry->next_prio = next->prio;
diff --git a/include/trace/events/signal.h b/include/trace/events/signal.h
index 814566c..17df434 100644
--- a/include/trace/events/signal.h
+++ b/include/trace/events/signal.h
@@ -10,7 +10,8 @@
#define TP_STORE_SIGINFO(__entry, info) \
do { \
- if (info == SEND_SIG_NOINFO) { \
+ if (info == SEND_SIG_NOINFO || \
+ info == SEND_SIG_FORCED) { \
__entry->errno = 0; \
__entry->code = SI_USER; \
} else if (info == SEND_SIG_PRIV) { \
diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h
index 88c59c1..5a64905 100644
--- a/include/trace/ftrace.h
+++ b/include/trace/ftrace.h
@@ -62,10 +62,13 @@
struct trace_entry ent; \
tstruct \
char __data[0]; \
- };
+ }; \
+ \
+ static struct ftrace_event_class event_class_##name;
+
#undef DEFINE_EVENT
#define DEFINE_EVENT(template, name, proto, args) \
- static struct ftrace_event_call \
+ static struct ftrace_event_call __used \
__attribute__((__aligned__(4))) event_##name
#undef DEFINE_EVENT_PRINT
@@ -147,7 +150,7 @@
*
* entry = iter->ent;
*
- * if (entry->type != event_<call>.id) {
+ * if (entry->type != event_<call>->event.type) {
* WARN_ON_ONCE(1);
* return TRACE_TYPE_UNHANDLED;
* }
@@ -206,18 +209,22 @@
#undef DECLARE_EVENT_CLASS
#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print) \
static notrace enum print_line_t \
-ftrace_raw_output_id_##call(int event_id, const char *name, \
- struct trace_iterator *iter, int flags) \
+ftrace_raw_output_##call(struct trace_iterator *iter, int flags, \
+ struct trace_event *trace_event) \
{ \
+ struct ftrace_event_call *event; \
struct trace_seq *s = &iter->seq; \
struct ftrace_raw_##call *field; \
struct trace_entry *entry; \
struct trace_seq *p; \
int ret; \
\
+ event = container_of(trace_event, struct ftrace_event_call, \
+ event); \
+ \
entry = iter->ent; \
\
- if (entry->type != event_id) { \
+ if (entry->type != event->event.type) { \
WARN_ON_ONCE(1); \
return TRACE_TYPE_UNHANDLED; \
} \
@@ -226,7 +233,7 @@
\
p = &get_cpu_var(ftrace_event_seq); \
trace_seq_init(p); \
- ret = trace_seq_printf(s, "%s: ", name); \
+ ret = trace_seq_printf(s, "%s: ", event->name); \
if (ret) \
ret = trace_seq_printf(s, print); \
put_cpu(); \
@@ -234,21 +241,16 @@
return TRACE_TYPE_PARTIAL_LINE; \
\
return TRACE_TYPE_HANDLED; \
-}
-
-#undef DEFINE_EVENT
-#define DEFINE_EVENT(template, name, proto, args) \
-static notrace enum print_line_t \
-ftrace_raw_output_##name(struct trace_iterator *iter, int flags) \
-{ \
- return ftrace_raw_output_id_##template(event_##name.id, \
- #name, iter, flags); \
-}
+} \
+static struct trace_event_functions ftrace_event_type_funcs_##call = { \
+ .trace = ftrace_raw_output_##call, \
+};
#undef DEFINE_EVENT_PRINT
#define DEFINE_EVENT_PRINT(template, call, proto, args, print) \
static notrace enum print_line_t \
-ftrace_raw_output_##call(struct trace_iterator *iter, int flags) \
+ftrace_raw_output_##call(struct trace_iterator *iter, int flags, \
+ struct trace_event *event) \
{ \
struct trace_seq *s = &iter->seq; \
struct ftrace_raw_##template *field; \
@@ -258,7 +260,7 @@
\
entry = iter->ent; \
\
- if (entry->type != event_##call.id) { \
+ if (entry->type != event_##call.event.type) { \
WARN_ON_ONCE(1); \
return TRACE_TYPE_UNHANDLED; \
} \
@@ -275,7 +277,10 @@
return TRACE_TYPE_PARTIAL_LINE; \
\
return TRACE_TYPE_HANDLED; \
-}
+} \
+static struct trace_event_functions ftrace_event_type_funcs_##call = { \
+ .trace = ftrace_raw_output_##call, \
+};
#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
@@ -381,80 +386,18 @@
#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
-#ifdef CONFIG_PERF_EVENTS
-
-/*
- * Generate the functions needed for tracepoint perf_event support.
- *
- * NOTE: The insertion profile callback (ftrace_profile_<call>) is defined later
- *
- * static int ftrace_profile_enable_<call>(void)
- * {
- * return register_trace_<call>(ftrace_profile_<call>);
- * }
- *
- * static void ftrace_profile_disable_<call>(void)
- * {
- * unregister_trace_<call>(ftrace_profile_<call>);
- * }
- *
- */
-
-#undef DECLARE_EVENT_CLASS
-#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print)
-
-#undef DEFINE_EVENT
-#define DEFINE_EVENT(template, name, proto, args) \
- \
-static void perf_trace_##name(proto); \
- \
-static notrace int \
-perf_trace_enable_##name(struct ftrace_event_call *unused) \
-{ \
- return register_trace_##name(perf_trace_##name); \
-} \
- \
-static notrace void \
-perf_trace_disable_##name(struct ftrace_event_call *unused) \
-{ \
- unregister_trace_##name(perf_trace_##name); \
-}
-
-#undef DEFINE_EVENT_PRINT
-#define DEFINE_EVENT_PRINT(template, name, proto, args, print) \
- DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args))
-
-#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
-
-#endif /* CONFIG_PERF_EVENTS */
-
/*
* Stage 4 of the trace events.
*
* Override the macros in <trace/trace_events.h> to include the following:
*
- * static void ftrace_event_<call>(proto)
- * {
- * event_trace_printk(_RET_IP_, "<call>: " <fmt>);
- * }
- *
- * static int ftrace_reg_event_<call>(struct ftrace_event_call *unused)
- * {
- * return register_trace_<call>(ftrace_event_<call>);
- * }
- *
- * static void ftrace_unreg_event_<call>(struct ftrace_event_call *unused)
- * {
- * unregister_trace_<call>(ftrace_event_<call>);
- * }
- *
- *
* For those macros defined with TRACE_EVENT:
*
* static struct ftrace_event_call event_<call>;
*
- * static void ftrace_raw_event_<call>(proto)
+ * static void ftrace_raw_event_<call>(void *__data, proto)
* {
+ * struct ftrace_event_call *event_call = __data;
* struct ftrace_data_offsets_<call> __maybe_unused __data_offsets;
* struct ring_buffer_event *event;
* struct ftrace_raw_<call> *entry; <-- defined in stage 1
@@ -469,7 +412,7 @@
* __data_size = ftrace_get_offsets_<call>(&__data_offsets, args);
*
* event = trace_current_buffer_lock_reserve(&buffer,
- * event_<call>.id,
+ * event_<call>->event.type,
* sizeof(*entry) + __data_size,
* irq_flags, pc);
* if (!event)
@@ -484,43 +427,42 @@
* event, irq_flags, pc);
* }
*
- * static int ftrace_raw_reg_event_<call>(struct ftrace_event_call *unused)
- * {
- * return register_trace_<call>(ftrace_raw_event_<call>);
- * }
- *
- * static void ftrace_unreg_event_<call>(struct ftrace_event_call *unused)
- * {
- * unregister_trace_<call>(ftrace_raw_event_<call>);
- * }
- *
* static struct trace_event ftrace_event_type_<call> = {
* .trace = ftrace_raw_output_<call>, <-- stage 2
* };
*
* static const char print_fmt_<call>[] = <TP_printk>;
*
+ * static struct ftrace_event_class __used event_class_<template> = {
+ * .system = "<system>",
+ * .define_fields = ftrace_define_fields_<call>,
+ * .fields = LIST_HEAD_INIT(event_class_##call.fields),
+ * .raw_init = trace_event_raw_init,
+ * .probe = ftrace_raw_event_##call,
+ * };
+ *
* static struct ftrace_event_call __used
* __attribute__((__aligned__(4)))
* __attribute__((section("_ftrace_events"))) event_<call> = {
* .name = "<call>",
- * .system = "<system>",
- * .raw_init = trace_event_raw_init,
- * .regfunc = ftrace_reg_event_<call>,
- * .unregfunc = ftrace_unreg_event_<call>,
+ * .class = event_class_<template>,
+ * .event = &ftrace_event_type_<call>,
* .print_fmt = print_fmt_<call>,
- * .define_fields = ftrace_define_fields_<call>,
- * }
+ * };
*
*/
#ifdef CONFIG_PERF_EVENTS
+#define _TRACE_PERF_PROTO(call, proto) \
+ static notrace void \
+ perf_trace_##call(void *__data, proto);
+
#define _TRACE_PERF_INIT(call) \
- .perf_event_enable = perf_trace_enable_##call, \
- .perf_event_disable = perf_trace_disable_##call,
+ .perf_probe = perf_trace_##call,
#else
+#define _TRACE_PERF_PROTO(call, proto)
#define _TRACE_PERF_INIT(call)
#endif /* CONFIG_PERF_EVENTS */
@@ -554,9 +496,9 @@
#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print) \
\
static notrace void \
-ftrace_raw_event_id_##call(struct ftrace_event_call *event_call, \
- proto) \
+ftrace_raw_event_##call(void *__data, proto) \
{ \
+ struct ftrace_event_call *event_call = __data; \
struct ftrace_data_offsets_##call __maybe_unused __data_offsets;\
struct ring_buffer_event *event; \
struct ftrace_raw_##call *entry; \
@@ -571,7 +513,7 @@
__data_size = ftrace_get_offsets_##call(&__data_offsets, args); \
\
event = trace_current_buffer_lock_reserve(&buffer, \
- event_call->id, \
+ event_call->event.type, \
sizeof(*entry) + __data_size, \
irq_flags, pc); \
if (!event) \
@@ -586,34 +528,21 @@
trace_nowake_buffer_unlock_commit(buffer, \
event, irq_flags, pc); \
}
+/*
+ * The ftrace_test_probe is compiled out, it is only here as a build time check
+ * to make sure that if the tracepoint handling changes, the ftrace probe will
+ * fail to compile unless it too is updated.
+ */
#undef DEFINE_EVENT
#define DEFINE_EVENT(template, call, proto, args) \
- \
-static notrace void ftrace_raw_event_##call(proto) \
+static inline void ftrace_test_probe_##call(void) \
{ \
- ftrace_raw_event_id_##template(&event_##call, args); \
-} \
- \
-static notrace int \
-ftrace_raw_reg_event_##call(struct ftrace_event_call *unused) \
-{ \
- return register_trace_##call(ftrace_raw_event_##call); \
-} \
- \
-static notrace void \
-ftrace_raw_unreg_event_##call(struct ftrace_event_call *unused) \
-{ \
- unregister_trace_##call(ftrace_raw_event_##call); \
-} \
- \
-static struct trace_event ftrace_event_type_##call = { \
- .trace = ftrace_raw_output_##call, \
-};
+ check_trace_callback_type_##call(ftrace_raw_event_##template); \
+}
#undef DEFINE_EVENT_PRINT
-#define DEFINE_EVENT_PRINT(template, name, proto, args, print) \
- DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args))
+#define DEFINE_EVENT_PRINT(template, name, proto, args, print)
#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
@@ -630,7 +559,16 @@
#undef DECLARE_EVENT_CLASS
#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print) \
-static const char print_fmt_##call[] = print;
+_TRACE_PERF_PROTO(call, PARAMS(proto)); \
+static const char print_fmt_##call[] = print; \
+static struct ftrace_event_class __used event_class_##call = { \
+ .system = __stringify(TRACE_SYSTEM), \
+ .define_fields = ftrace_define_fields_##call, \
+ .fields = LIST_HEAD_INIT(event_class_##call.fields),\
+ .raw_init = trace_event_raw_init, \
+ .probe = ftrace_raw_event_##call, \
+ _TRACE_PERF_INIT(call) \
+};
#undef DEFINE_EVENT
#define DEFINE_EVENT(template, call, proto, args) \
@@ -639,15 +577,10 @@
__attribute__((__aligned__(4))) \
__attribute__((section("_ftrace_events"))) event_##call = { \
.name = #call, \
- .system = __stringify(TRACE_SYSTEM), \
- .event = &ftrace_event_type_##call, \
- .raw_init = trace_event_raw_init, \
- .regfunc = ftrace_raw_reg_event_##call, \
- .unregfunc = ftrace_raw_unreg_event_##call, \
+ .class = &event_class_##template, \
+ .event.funcs = &ftrace_event_type_funcs_##template, \
.print_fmt = print_fmt_##template, \
- .define_fields = ftrace_define_fields_##template, \
- _TRACE_PERF_INIT(call) \
-}
+};
#undef DEFINE_EVENT_PRINT
#define DEFINE_EVENT_PRINT(template, call, proto, args, print) \
@@ -658,14 +591,9 @@
__attribute__((__aligned__(4))) \
__attribute__((section("_ftrace_events"))) event_##call = { \
.name = #call, \
- .system = __stringify(TRACE_SYSTEM), \
- .event = &ftrace_event_type_##call, \
- .raw_init = trace_event_raw_init, \
- .regfunc = ftrace_raw_reg_event_##call, \
- .unregfunc = ftrace_raw_unreg_event_##call, \
+ .class = &event_class_##template, \
+ .event.funcs = &ftrace_event_type_funcs_##call, \
.print_fmt = print_fmt_##call, \
- .define_fields = ftrace_define_fields_##template, \
- _TRACE_PERF_INIT(call) \
}
#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
@@ -765,17 +693,20 @@
#undef DECLARE_EVENT_CLASS
#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print) \
static notrace void \
-perf_trace_templ_##call(struct ftrace_event_call *event_call, \
- struct pt_regs *__regs, proto) \
+perf_trace_##call(void *__data, proto) \
{ \
+ struct ftrace_event_call *event_call = __data; \
struct ftrace_data_offsets_##call __maybe_unused __data_offsets;\
struct ftrace_raw_##call *entry; \
+ struct pt_regs __regs; \
u64 __addr = 0, __count = 1; \
- unsigned long irq_flags; \
+ struct hlist_head *head; \
int __entry_size; \
int __data_size; \
int rctx; \
\
+ perf_fetch_caller_regs(&__regs, 1); \
+ \
__data_size = ftrace_get_offsets_##call(&__data_offsets, args); \
__entry_size = ALIGN(__data_size + sizeof(*entry) + sizeof(u32),\
sizeof(u64)); \
@@ -784,32 +715,34 @@
if (WARN_ONCE(__entry_size > PERF_MAX_TRACE_SIZE, \
"profile buffer not large enough")) \
return; \
+ \
entry = (struct ftrace_raw_##call *)perf_trace_buf_prepare( \
- __entry_size, event_call->id, &rctx, &irq_flags); \
+ __entry_size, event_call->event.type, &__regs, &rctx); \
if (!entry) \
return; \
+ \
tstruct \
\
{ assign; } \
\
+ head = this_cpu_ptr(event_call->perf_events); \
perf_trace_buf_submit(entry, __entry_size, rctx, __addr, \
- __count, irq_flags, __regs); \
+ __count, &__regs, head); \
}
+/*
+ * This part is compiled out, it is only here as a build time check
+ * to make sure that if the tracepoint handling changes, the
+ * perf probe will fail to compile unless it too is updated.
+ */
#undef DEFINE_EVENT
#define DEFINE_EVENT(template, call, proto, args) \
-static notrace void perf_trace_##call(proto) \
+static inline void perf_test_probe_##call(void) \
{ \
- struct ftrace_event_call *event_call = &event_##call; \
- struct pt_regs *__regs = &get_cpu_var(perf_trace_regs); \
- \
- perf_fetch_caller_regs(__regs, 1); \
- \
- perf_trace_templ_##template(event_call, __regs, args); \
- \
- put_cpu_var(perf_trace_regs); \
+ check_trace_callback_type_##call(perf_trace_##template); \
}
+
#undef DEFINE_EVENT_PRINT
#define DEFINE_EVENT_PRINT(template, name, proto, args, print) \
DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args))
diff --git a/include/trace/syscall.h b/include/trace/syscall.h
index e5e5f48..257e089 100644
--- a/include/trace/syscall.h
+++ b/include/trace/syscall.h
@@ -25,6 +25,8 @@
int nb_args;
const char **types;
const char **args;
+ struct list_head enter_fields;
+ struct list_head exit_fields;
struct ftrace_event_call *enter_event;
struct ftrace_event_call *exit_event;
@@ -34,16 +36,16 @@
extern unsigned long arch_syscall_addr(int nr);
extern int init_syscall_trace(struct ftrace_event_call *call);
-extern int syscall_enter_define_fields(struct ftrace_event_call *call);
-extern int syscall_exit_define_fields(struct ftrace_event_call *call);
extern int reg_event_syscall_enter(struct ftrace_event_call *call);
extern void unreg_event_syscall_enter(struct ftrace_event_call *call);
extern int reg_event_syscall_exit(struct ftrace_event_call *call);
extern void unreg_event_syscall_exit(struct ftrace_event_call *call);
extern int
ftrace_format_syscall(struct ftrace_event_call *call, struct trace_seq *s);
-enum print_line_t print_syscall_enter(struct trace_iterator *iter, int flags);
-enum print_line_t print_syscall_exit(struct trace_iterator *iter, int flags);
+enum print_line_t print_syscall_enter(struct trace_iterator *iter, int flags,
+ struct trace_event *event);
+enum print_line_t print_syscall_exit(struct trace_iterator *iter, int flags,
+ struct trace_event *event);
#endif
#ifdef CONFIG_PERF_EVENTS
diff --git a/init/Kconfig b/init/Kconfig
index 2cce9f3..5cff9a9 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -76,6 +76,14 @@
variables passed to init from the kernel command line.
+config CROSS_COMPILE
+ string "Cross-compiler tool prefix"
+ help
+ Same as running 'make CROSS_COMPILE=prefix-' but stored for
+ default make runs in this kernel build directory. You don't
+ need to set this unless you want the configured kernel build
+ directory to select the cross-compiler automatically.
+
config LOCALVERSION
string "Local version - append to kernel release"
help
diff --git a/init/main.c b/init/main.c
index 3bdb152..a42fdf4 100644
--- a/init/main.c
+++ b/init/main.c
@@ -125,7 +125,9 @@
#ifdef CONFIG_SMP
/* Setup configured maximum number of CPUs to activate */
-unsigned int __initdata setup_max_cpus = NR_CPUS;
+unsigned int setup_max_cpus = NR_CPUS;
+EXPORT_SYMBOL(setup_max_cpus);
+
/*
* Setup routine for controlling SMP activation
@@ -422,18 +424,26 @@
* gcc-3.4 accidentally inlines this function, so use noinline.
*/
+static __initdata DECLARE_COMPLETION(kthreadd_done);
+
static noinline void __init_refok rest_init(void)
__releases(kernel_lock)
{
int pid;
rcu_scheduler_starting();
+ /*
+ * We need to spawn init first so that it obtains pid 1, however
+ * the init task will end up wanting to create kthreads, which, if
+ * we schedule it before we create kthreadd, will OOPS.
+ */
kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND);
numa_default_policy();
pid = kernel_thread(kthreadd, NULL, CLONE_FS | CLONE_FILES);
rcu_read_lock();
kthreadd_task = find_task_by_pid_ns(pid, &init_pid_ns);
rcu_read_unlock();
+ complete(&kthreadd_done);
unlock_kernel();
/*
@@ -855,6 +865,10 @@
static int __init kernel_init(void * unused)
{
+ /*
+ * Wait until kthreadd is all set-up.
+ */
+ wait_for_completion(&kthreadd_done);
lock_kernel();
/*
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 5108232..c93fd3f 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -176,7 +176,6 @@
}
return inode;
out_inode:
- make_bad_inode(inode);
iput(inode);
return NULL;
}
diff --git a/ipc/sem.c b/ipc/sem.c
index dbef95b..40a8f46 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -3,56 +3,6 @@
* Copyright (C) 1992 Krishna Balasubramanian
* Copyright (C) 1995 Eric Schenk, Bruno Haible
*
- * IMPLEMENTATION NOTES ON CODE REWRITE (Eric Schenk, January 1995):
- * This code underwent a massive rewrite in order to solve some problems
- * with the original code. In particular the original code failed to
- * wake up processes that were waiting for semval to go to 0 if the
- * value went to 0 and was then incremented rapidly enough. In solving
- * this problem I have also modified the implementation so that it
- * processes pending operations in a FIFO manner, thus give a guarantee
- * that processes waiting for a lock on the semaphore won't starve
- * unless another locking process fails to unlock.
- * In addition the following two changes in behavior have been introduced:
- * - The original implementation of semop returned the value
- * last semaphore element examined on success. This does not
- * match the manual page specifications, and effectively
- * allows the user to read the semaphore even if they do not
- * have read permissions. The implementation now returns 0
- * on success as stated in the manual page.
- * - There is some confusion over whether the set of undo adjustments
- * to be performed at exit should be done in an atomic manner.
- * That is, if we are attempting to decrement the semval should we queue
- * up and wait until we can do so legally?
- * The original implementation attempted to do this.
- * The current implementation does not do so. This is because I don't
- * think it is the right thing (TM) to do, and because I couldn't
- * see a clean way to get the old behavior with the new design.
- * The POSIX standard and SVID should be consulted to determine
- * what behavior is mandated.
- *
- * Further notes on refinement (Christoph Rohland, December 1998):
- * - The POSIX standard says, that the undo adjustments simply should
- * redo. So the current implementation is o.K.
- * - The previous code had two flaws:
- * 1) It actively gave the semaphore to the next waiting process
- * sleeping on the semaphore. Since this process did not have the
- * cpu this led to many unnecessary context switches and bad
- * performance. Now we only check which process should be able to
- * get the semaphore and if this process wants to reduce some
- * semaphore value we simply wake it up without doing the
- * operation. So it has to try to get it later. Thus e.g. the
- * running process may reacquire the semaphore during the current
- * time slice. If it only waits for zero or increases the semaphore,
- * we do the operation in advance and wake it up.
- * 2) It did not wake up all zero waiting processes. We try to do
- * better but only get the semops right which only wait for zero or
- * increase. If there are decrement operations in the operations
- * array we do the same as before.
- *
- * With the incarnation of O(1) scheduler, it becomes unnecessary to perform
- * check/retry algorithm for waking up blocked processes as the new scheduler
- * is better at handling thread switch than the old one.
- *
* /proc/sysvipc/sem support (c) 1999 Dragos Acostachioaie <dragos@iname.com>
*
* SMP-threaded, sysctl's added
@@ -61,6 +11,8 @@
* (c) 2001 Red Hat Inc
* Lockless wakeup
* (c) 2003 Manfred Spraul <manfred@colorfullife.com>
+ * Further wakeup optimizations, documentation
+ * (c) 2010 Manfred Spraul <manfred@colorfullife.com>
*
* support for audit of ipc object properties and permission changes
* Dustin Kirkland <dustin.kirkland@us.ibm.com>
@@ -68,6 +20,57 @@
* namespaces support
* OpenVZ, SWsoft Inc.
* Pavel Emelianov <xemul@openvz.org>
+ *
+ * Implementation notes: (May 2010)
+ * This file implements System V semaphores.
+ *
+ * User space visible behavior:
+ * - FIFO ordering for semop() operations (just FIFO, not starvation
+ * protection)
+ * - multiple semaphore operations that alter the same semaphore in
+ * one semop() are handled.
+ * - sem_ctime (time of last semctl()) is updated in the IPC_SET, SETVAL and
+ * SETALL calls.
+ * - two Linux specific semctl() commands: SEM_STAT, SEM_INFO.
+ * - undo adjustments at process exit are limited to 0..SEMVMX.
+ * - namespace are supported.
+ * - SEMMSL, SEMMNS, SEMOPM and SEMMNI can be configured at runtine by writing
+ * to /proc/sys/kernel/sem.
+ * - statistics about the usage are reported in /proc/sysvipc/sem.
+ *
+ * Internals:
+ * - scalability:
+ * - all global variables are read-mostly.
+ * - semop() calls and semctl(RMID) are synchronized by RCU.
+ * - most operations do write operations (actually: spin_lock calls) to
+ * the per-semaphore array structure.
+ * Thus: Perfect SMP scaling between independent semaphore arrays.
+ * If multiple semaphores in one array are used, then cache line
+ * trashing on the semaphore array spinlock will limit the scaling.
+ * - semncnt and semzcnt are calculated on demand in count_semncnt() and
+ * count_semzcnt()
+ * - the task that performs a successful semop() scans the list of all
+ * sleeping tasks and completes any pending operations that can be fulfilled.
+ * Semaphores are actively given to waiting tasks (necessary for FIFO).
+ * (see update_queue())
+ * - To improve the scalability, the actual wake-up calls are performed after
+ * dropping all locks. (see wake_up_sem_queue_prepare(),
+ * wake_up_sem_queue_do())
+ * - All work is done by the waker, the woken up task does not have to do
+ * anything - not even acquiring a lock or dropping a refcount.
+ * - A woken up task may not even touch the semaphore array anymore, it may
+ * have been destroyed already by a semctl(RMID).
+ * - The synchronizations between wake-ups due to a timeout/signal and a
+ * wake-up due to a completed semaphore operation is achieved by using an
+ * intermediate state (IN_WAKEUP).
+ * - UNDO values are stored in an array (one per process and per
+ * semaphore array, lazily allocated). For backwards compatibility, multiple
+ * modes for the UNDO variables are supported (per process, per thread)
+ * (see copy_semundo, CLONE_SYSVSEM)
+ * - There are two lists of the pending operations: a per-array list
+ * and per-semaphore list (stored in the array). This allows to achieve FIFO
+ * ordering without always scanning all pending operations.
+ * The worst-case behavior is nevertheless O(N^2) for N wakeups.
*/
#include <linux/slab.h>
@@ -381,7 +384,6 @@
sop--;
}
- sma->sem_otime = get_seconds();
return 0;
out_of_range:
@@ -404,25 +406,51 @@
return result;
}
-/*
- * Wake up a process waiting on the sem queue with a given error.
- * The queue is invalid (may not be accessed) after the function returns.
+/** wake_up_sem_queue_prepare(q, error): Prepare wake-up
+ * @q: queue entry that must be signaled
+ * @error: Error value for the signal
+ *
+ * Prepare the wake-up of the queue entry q.
*/
-static void wake_up_sem_queue(struct sem_queue *q, int error)
+static void wake_up_sem_queue_prepare(struct list_head *pt,
+ struct sem_queue *q, int error)
{
- /*
- * Hold preempt off so that we don't get preempted and have the
- * wakee busy-wait until we're scheduled back on. We're holding
- * locks here so it may not strictly be needed, however if the
- * locks become preemptible then this prevents such a problem.
- */
- preempt_disable();
+ if (list_empty(pt)) {
+ /*
+ * Hold preempt off so that we don't get preempted and have the
+ * wakee busy-wait until we're scheduled back on.
+ */
+ preempt_disable();
+ }
q->status = IN_WAKEUP;
- wake_up_process(q->sleeper);
- /* hands-off: q can disappear immediately after writing q->status. */
- smp_wmb();
- q->status = error;
- preempt_enable();
+ q->pid = error;
+
+ list_add_tail(&q->simple_list, pt);
+}
+
+/**
+ * wake_up_sem_queue_do(pt) - do the actual wake-up
+ * @pt: list of tasks to be woken up
+ *
+ * Do the actual wake-up.
+ * The function is called without any locks held, thus the semaphore array
+ * could be destroyed already and the tasks can disappear as soon as the
+ * status is set to the actual return code.
+ */
+static void wake_up_sem_queue_do(struct list_head *pt)
+{
+ struct sem_queue *q, *t;
+ int did_something;
+
+ did_something = !list_empty(pt);
+ list_for_each_entry_safe(q, t, pt, simple_list) {
+ wake_up_process(q->sleeper);
+ /* q can disappear immediately after writing q->status. */
+ smp_wmb();
+ q->status = q->pid;
+ }
+ if (did_something)
+ preempt_enable();
}
static void unlink_queue(struct sem_array *sma, struct sem_queue *q)
@@ -434,22 +462,90 @@
sma->complex_count--;
}
+/** check_restart(sma, q)
+ * @sma: semaphore array
+ * @q: the operation that just completed
+ *
+ * update_queue is O(N^2) when it restarts scanning the whole queue of
+ * waiting operations. Therefore this function checks if the restart is
+ * really necessary. It is called after a previously waiting operation
+ * was completed.
+ */
+static int check_restart(struct sem_array *sma, struct sem_queue *q)
+{
+ struct sem *curr;
+ struct sem_queue *h;
+
+ /* if the operation didn't modify the array, then no restart */
+ if (q->alter == 0)
+ return 0;
+
+ /* pending complex operations are too difficult to analyse */
+ if (sma->complex_count)
+ return 1;
+
+ /* we were a sleeping complex operation. Too difficult */
+ if (q->nsops > 1)
+ return 1;
+
+ curr = sma->sem_base + q->sops[0].sem_num;
+
+ /* No-one waits on this queue */
+ if (list_empty(&curr->sem_pending))
+ return 0;
+
+ /* the new semaphore value */
+ if (curr->semval) {
+ /* It is impossible that someone waits for the new value:
+ * - q is a previously sleeping simple operation that
+ * altered the array. It must be a decrement, because
+ * simple increments never sleep.
+ * - The value is not 0, thus wait-for-zero won't proceed.
+ * - If there are older (higher priority) decrements
+ * in the queue, then they have observed the original
+ * semval value and couldn't proceed. The operation
+ * decremented to value - thus they won't proceed either.
+ */
+ BUG_ON(q->sops[0].sem_op >= 0);
+ return 0;
+ }
+ /*
+ * semval is 0. Check if there are wait-for-zero semops.
+ * They must be the first entries in the per-semaphore simple queue
+ */
+ h = list_first_entry(&curr->sem_pending, struct sem_queue, simple_list);
+ BUG_ON(h->nsops != 1);
+ BUG_ON(h->sops[0].sem_num != q->sops[0].sem_num);
+
+ /* Yes, there is a wait-for-zero semop. Restart */
+ if (h->sops[0].sem_op == 0)
+ return 1;
+
+ /* Again - no-one is waiting for the new value. */
+ return 0;
+}
+
/**
* update_queue(sma, semnum): Look for tasks that can be completed.
* @sma: semaphore array.
* @semnum: semaphore that was modified.
+ * @pt: list head for the tasks that must be woken up.
*
* update_queue must be called after a semaphore in a semaphore array
* was modified. If multiple semaphore were modified, then @semnum
* must be set to -1.
+ * The tasks that must be woken up are added to @pt. The return code
+ * is stored in q->pid.
+ * The function return 1 if at least one semop was completed successfully.
*/
-static void update_queue(struct sem_array *sma, int semnum)
+static int update_queue(struct sem_array *sma, int semnum, struct list_head *pt)
{
struct sem_queue *q;
struct list_head *walk;
struct list_head *pending_list;
int offset;
+ int semop_completed = 0;
/* if there are complex operations around, then knowing the semaphore
* that was modified doesn't help us. Assume that multiple semaphores
@@ -469,7 +565,7 @@
again:
walk = pending_list->next;
while (walk != pending_list) {
- int error, alter;
+ int error, restart;
q = (struct sem_queue *)((char *)walk - offset);
walk = walk->next;
@@ -494,22 +590,58 @@
unlink_queue(sma, q);
- /*
- * The next operation that must be checked depends on the type
- * of the completed operation:
- * - if the operation modified the array, then restart from the
- * head of the queue and check for threads that might be
- * waiting for the new semaphore values.
- * - if the operation didn't modify the array, then just
- * continue.
- */
- alter = q->alter;
- wake_up_sem_queue(q, error);
- if (alter && !error)
+ if (error) {
+ restart = 0;
+ } else {
+ semop_completed = 1;
+ restart = check_restart(sma, q);
+ }
+
+ wake_up_sem_queue_prepare(pt, q, error);
+ if (restart)
goto again;
}
+ return semop_completed;
}
+/**
+ * do_smart_update(sma, sops, nsops, otime, pt) - optimized update_queue
+ * @sma: semaphore array
+ * @sops: operations that were performed
+ * @nsops: number of operations
+ * @otime: force setting otime
+ * @pt: list head of the tasks that must be woken up.
+ *
+ * do_smart_update() does the required called to update_queue, based on the
+ * actual changes that were performed on the semaphore array.
+ * Note that the function does not do the actual wake-up: the caller is
+ * responsible for calling wake_up_sem_queue_do(@pt).
+ * It is safe to perform this call after dropping all locks.
+ */
+static void do_smart_update(struct sem_array *sma, struct sembuf *sops, int nsops,
+ int otime, struct list_head *pt)
+{
+ int i;
+
+ if (sma->complex_count || sops == NULL) {
+ if (update_queue(sma, -1, pt))
+ otime = 1;
+ goto done;
+ }
+
+ for (i = 0; i < nsops; i++) {
+ if (sops[i].sem_op > 0 ||
+ (sops[i].sem_op < 0 &&
+ sma->sem_base[sops[i].sem_num].semval == 0))
+ if (update_queue(sma, sops[i].sem_num, pt))
+ otime = 1;
+ }
+done:
+ if (otime)
+ sma->sem_otime = get_seconds();
+}
+
+
/* The following counts are associated to each semaphore:
* semncnt number of tasks waiting on semval being nonzero
* semzcnt number of tasks waiting on semval being zero
@@ -572,6 +704,7 @@
struct sem_undo *un, *tu;
struct sem_queue *q, *tq;
struct sem_array *sma = container_of(ipcp, struct sem_array, sem_perm);
+ struct list_head tasks;
/* Free the existing undo structures for this semaphore set. */
assert_spin_locked(&sma->sem_perm.lock);
@@ -585,15 +718,17 @@
}
/* Wake up all pending processes and let them fail with EIDRM. */
+ INIT_LIST_HEAD(&tasks);
list_for_each_entry_safe(q, tq, &sma->sem_pending, list) {
unlink_queue(sma, q);
- wake_up_sem_queue(q, -EIDRM);
+ wake_up_sem_queue_prepare(&tasks, q, -EIDRM);
}
/* Remove the semaphore set from the IDR */
sem_rmid(ns, sma);
sem_unlock(sma);
+ wake_up_sem_queue_do(&tasks);
ns->used_sems -= sma->sem_nsems;
security_sem_free(sma);
ipc_rcu_putref(sma);
@@ -715,11 +850,13 @@
ushort fast_sem_io[SEMMSL_FAST];
ushort* sem_io = fast_sem_io;
int nsems;
+ struct list_head tasks;
sma = sem_lock_check(ns, semid);
if (IS_ERR(sma))
return PTR_ERR(sma);
+ INIT_LIST_HEAD(&tasks);
nsems = sma->sem_nsems;
err = -EACCES;
@@ -807,7 +944,7 @@
}
sma->sem_ctime = get_seconds();
/* maybe some queued-up processes were waiting for this */
- update_queue(sma, -1);
+ do_smart_update(sma, NULL, 0, 0, &tasks);
err = 0;
goto out_unlock;
}
@@ -849,13 +986,15 @@
curr->sempid = task_tgid_vnr(current);
sma->sem_ctime = get_seconds();
/* maybe some queued-up processes were waiting for this */
- update_queue(sma, semnum);
+ do_smart_update(sma, NULL, 0, 0, &tasks);
err = 0;
goto out_unlock;
}
}
out_unlock:
sem_unlock(sma);
+ wake_up_sem_queue_do(&tasks);
+
out_free:
if(sem_io != fast_sem_io)
ipc_free(sem_io, sizeof(ushort)*nsems);
@@ -1069,7 +1208,7 @@
/* step 1: figure out the size of the semaphore array */
sma = sem_lock_check(ns, semid);
if (IS_ERR(sma))
- return ERR_PTR(PTR_ERR(sma));
+ return ERR_CAST(sma);
nsems = sma->sem_nsems;
sem_getref_and_unlock(sma);
@@ -1117,6 +1256,33 @@
return un;
}
+
+/**
+ * get_queue_result - Retrieve the result code from sem_queue
+ * @q: Pointer to queue structure
+ *
+ * Retrieve the return code from the pending queue. If IN_WAKEUP is found in
+ * q->status, then we must loop until the value is replaced with the final
+ * value: This may happen if a task is woken up by an unrelated event (e.g.
+ * signal) and in parallel the task is woken up by another task because it got
+ * the requested semaphores.
+ *
+ * The function can be called with or without holding the semaphore spinlock.
+ */
+static int get_queue_result(struct sem_queue *q)
+{
+ int error;
+
+ error = q->status;
+ while (unlikely(error == IN_WAKEUP)) {
+ cpu_relax();
+ error = q->status;
+ }
+
+ return error;
+}
+
+
SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
unsigned, nsops, const struct timespec __user *, timeout)
{
@@ -1129,6 +1295,7 @@
struct sem_queue queue;
unsigned long jiffies_left = 0;
struct ipc_namespace *ns;
+ struct list_head tasks;
ns = current->nsproxy->ipc_ns;
@@ -1177,6 +1344,8 @@
} else
un = NULL;
+ INIT_LIST_HEAD(&tasks);
+
sma = sem_lock_check(ns, semid);
if (IS_ERR(sma)) {
if (un)
@@ -1225,7 +1394,7 @@
error = try_atomic_semop (sma, sops, nsops, un, task_tgid_vnr(current));
if (error <= 0) {
if (alter && error == 0)
- update_queue(sma, (nsops == 1) ? sops[0].sem_num : -1);
+ do_smart_update(sma, sops, nsops, 1, &tasks);
goto out_unlock_free;
}
@@ -1267,15 +1436,18 @@
else
schedule();
- error = queue.status;
- while(unlikely(error == IN_WAKEUP)) {
- cpu_relax();
- error = queue.status;
- }
+ error = get_queue_result(&queue);
if (error != -EINTR) {
/* fast path: update_queue already obtained all requested
- * resources */
+ * resources.
+ * Perform a smp_mb(): User space could assume that semop()
+ * is a memory barrier: Without the mb(), the cpu could
+ * speculatively read in user space stale data that was
+ * overwritten by the previous owner of the semaphore.
+ */
+ smp_mb();
+
goto out_free;
}
@@ -1285,10 +1457,12 @@
goto out_free;
}
+ error = get_queue_result(&queue);
+
/*
* If queue.status != -EINTR we are woken up by another process
*/
- error = queue.status;
+
if (error != -EINTR) {
goto out_unlock_free;
}
@@ -1302,6 +1476,8 @@
out_unlock_free:
sem_unlock(sma);
+
+ wake_up_sem_queue_do(&tasks);
out_free:
if(sops != fast_sops)
kfree(sops);
@@ -1362,6 +1538,7 @@
for (;;) {
struct sem_array *sma;
struct sem_undo *un;
+ struct list_head tasks;
int semid;
int i;
@@ -1425,10 +1602,11 @@
semaphore->sempid = task_tgid_vnr(current);
}
}
- sma->sem_otime = get_seconds();
/* maybe some queued-up processes were waiting for this */
- update_queue(sma, -1);
+ INIT_LIST_HEAD(&tasks);
+ do_smart_update(sma, NULL, 0, 1, &tasks);
sem_unlock(sma);
+ wake_up_sem_queue_do(&tasks);
call_rcu(&un->rcu, free_un);
}
diff --git a/ipc/shm.c b/ipc/shm.c
index 1a314c8..52ed77e 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -273,16 +273,13 @@
return 0;
}
-static int shm_fsync(struct file *file, struct dentry *dentry, int datasync)
+static int shm_fsync(struct file *file, int datasync)
{
- int (*fsync) (struct file *, struct dentry *, int datasync);
struct shm_file_data *sfd = shm_file_data(file);
- int ret = -EINVAL;
- fsync = sfd->file->f_op->fsync;
- if (fsync)
- ret = fsync(sfd->file, sfd->file->f_path.dentry, datasync);
- return ret;
+ if (!sfd->file->f_op->fsync)
+ return -EINVAL;
+ return sfd->file->f_op->fsync(sfd->file, datasync);
}
static unsigned long shm_get_unmapped_area(struct file *file,
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 2917750..3ac6f5b 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -2994,7 +2994,6 @@
remove);
struct cgroup *cgrp = event->cgrp;
- /* TODO: check return code */
event->cft->unregister_event(cgrp, event->cft, event->eventfd);
eventfd_ctx_put(event->eventfd);
@@ -4599,7 +4598,7 @@
parent_css = parent->subsys[subsys_id];
child_css = child->subsys[subsys_id];
parent_id = parent_css->id;
- depth = parent_id->depth;
+ depth = parent_id->depth + 1;
child_id = get_new_cssid(ss, depth);
if (IS_ERR(child_id))
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 124ad9d..97d1b42 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -20,13 +20,29 @@
/* Serializes the updates to cpu_online_mask, cpu_present_mask */
static DEFINE_MUTEX(cpu_add_remove_lock);
-static __cpuinitdata RAW_NOTIFIER_HEAD(cpu_chain);
+/*
+ * The following two API's must be used when attempting
+ * to serialize the updates to cpu_online_mask, cpu_present_mask.
+ */
+void cpu_maps_update_begin(void)
+{
+ mutex_lock(&cpu_add_remove_lock);
+}
+
+void cpu_maps_update_done(void)
+{
+ mutex_unlock(&cpu_add_remove_lock);
+}
+
+static RAW_NOTIFIER_HEAD(cpu_chain);
/* If set, cpu_up and cpu_down will return -EBUSY and do nothing.
* Should always be manipulated under cpu_add_remove_lock
*/
static int cpu_hotplug_disabled;
+#ifdef CONFIG_HOTPLUG_CPU
+
static struct {
struct task_struct *active_writer;
struct mutex lock; /* Synchronizes accesses to refcount, */
@@ -41,8 +57,6 @@
.refcount = 0,
};
-#ifdef CONFIG_HOTPLUG_CPU
-
void get_online_cpus(void)
{
might_sleep();
@@ -67,22 +81,6 @@
}
EXPORT_SYMBOL_GPL(put_online_cpus);
-#endif /* CONFIG_HOTPLUG_CPU */
-
-/*
- * The following two API's must be used when attempting
- * to serialize the updates to cpu_online_mask, cpu_present_mask.
- */
-void cpu_maps_update_begin(void)
-{
- mutex_lock(&cpu_add_remove_lock);
-}
-
-void cpu_maps_update_done(void)
-{
- mutex_unlock(&cpu_add_remove_lock);
-}
-
/*
* This ensures that the hotplug operation can begin only when the
* refcount goes to zero.
@@ -124,6 +122,12 @@
cpu_hotplug.active_writer = NULL;
mutex_unlock(&cpu_hotplug.lock);
}
+
+#else /* #if CONFIG_HOTPLUG_CPU */
+static void cpu_hotplug_begin(void) {}
+static void cpu_hotplug_done(void) {}
+#endif /* #esle #if CONFIG_HOTPLUG_CPU */
+
/* Need to know about CPUs going up/down? */
int __ref register_cpu_notifier(struct notifier_block *nb)
{
@@ -134,8 +138,29 @@
return ret;
}
+static int __cpu_notify(unsigned long val, void *v, int nr_to_call,
+ int *nr_calls)
+{
+ int ret;
+
+ ret = __raw_notifier_call_chain(&cpu_chain, val, v, nr_to_call,
+ nr_calls);
+
+ return notifier_to_errno(ret);
+}
+
+static int cpu_notify(unsigned long val, void *v)
+{
+ return __cpu_notify(val, v, -1, NULL);
+}
+
#ifdef CONFIG_HOTPLUG_CPU
+static void cpu_notify_nofail(unsigned long val, void *v)
+{
+ BUG_ON(cpu_notify(val, v));
+}
+
EXPORT_SYMBOL(register_cpu_notifier);
void __ref unregister_cpu_notifier(struct notifier_block *nb)
@@ -181,8 +206,7 @@
if (err < 0)
return err;
- raw_notifier_call_chain(&cpu_chain, CPU_DYING | param->mod,
- param->hcpu);
+ cpu_notify(CPU_DYING | param->mod, param->hcpu);
if (task_cpu(param->caller) == cpu)
move_task_off_dead_cpu(cpu, param->caller);
@@ -212,17 +236,14 @@
cpu_hotplug_begin();
set_cpu_active(cpu, false);
- err = __raw_notifier_call_chain(&cpu_chain, CPU_DOWN_PREPARE | mod,
- hcpu, -1, &nr_calls);
- if (err == NOTIFY_BAD) {
+ err = __cpu_notify(CPU_DOWN_PREPARE | mod, hcpu, -1, &nr_calls);
+ if (err) {
set_cpu_active(cpu, true);
nr_calls--;
- __raw_notifier_call_chain(&cpu_chain, CPU_DOWN_FAILED | mod,
- hcpu, nr_calls, NULL);
+ __cpu_notify(CPU_DOWN_FAILED | mod, hcpu, nr_calls, NULL);
printk("%s: attempt to take down CPU %u failed\n",
__func__, cpu);
- err = -EINVAL;
goto out_release;
}
@@ -230,9 +251,7 @@
if (err) {
set_cpu_active(cpu, true);
/* CPU didn't die: tell everyone. Can't complain. */
- if (raw_notifier_call_chain(&cpu_chain, CPU_DOWN_FAILED | mod,
- hcpu) == NOTIFY_BAD)
- BUG();
+ cpu_notify_nofail(CPU_DOWN_FAILED | mod, hcpu);
goto out_release;
}
@@ -246,19 +265,14 @@
__cpu_die(cpu);
/* CPU is completely dead: tell everyone. Too late to complain. */
- if (raw_notifier_call_chain(&cpu_chain, CPU_DEAD | mod,
- hcpu) == NOTIFY_BAD)
- BUG();
+ cpu_notify_nofail(CPU_DEAD | mod, hcpu);
check_for_tasks(cpu);
out_release:
cpu_hotplug_done();
- if (!err) {
- if (raw_notifier_call_chain(&cpu_chain, CPU_POST_DEAD | mod,
- hcpu) == NOTIFY_BAD)
- BUG();
- }
+ if (!err)
+ cpu_notify_nofail(CPU_POST_DEAD | mod, hcpu);
return err;
}
@@ -293,13 +307,11 @@
return -EINVAL;
cpu_hotplug_begin();
- ret = __raw_notifier_call_chain(&cpu_chain, CPU_UP_PREPARE | mod, hcpu,
- -1, &nr_calls);
- if (ret == NOTIFY_BAD) {
+ ret = __cpu_notify(CPU_UP_PREPARE | mod, hcpu, -1, &nr_calls);
+ if (ret) {
nr_calls--;
printk("%s: attempt to bring up CPU %u failed\n",
__func__, cpu);
- ret = -EINVAL;
goto out_notify;
}
@@ -312,12 +324,11 @@
set_cpu_active(cpu, true);
/* Now call notifier in preparation. */
- raw_notifier_call_chain(&cpu_chain, CPU_ONLINE | mod, hcpu);
+ cpu_notify(CPU_ONLINE | mod, hcpu);
out_notify:
if (ret != 0)
- __raw_notifier_call_chain(&cpu_chain,
- CPU_UP_CANCELED | mod, hcpu, nr_calls, NULL);
+ __cpu_notify(CPU_UP_CANCELED | mod, hcpu, nr_calls, NULL);
cpu_hotplug_done();
return ret;
@@ -383,7 +394,7 @@
int disable_nonboot_cpus(void)
{
- int cpu, first_cpu, error;
+ int cpu, first_cpu, error = 0;
cpu_maps_update_begin();
first_cpu = cpumask_first(cpu_online_mask);
@@ -481,7 +492,7 @@
if (frozen_cpus != NULL && cpumask_test_cpu(cpu, frozen_cpus))
val = CPU_STARTING_FROZEN;
#endif /* CONFIG_PM_SLEEP_SMP */
- raw_notifier_call_chain(&cpu_chain, val, (void *)(long)cpu);
+ cpu_notify(val, (void *)(long)cpu);
}
#endif /* CONFIG_SMP */
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 61d6af7..02b9611 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -2469,7 +2469,8 @@
}
/**
- * cpuset_mem_spread_node() - On which node to begin search for a page
+ * cpuset_mem_spread_node() - On which node to begin search for a file page
+ * cpuset_slab_spread_node() - On which node to begin search for a slab page
*
* If a task is marked PF_SPREAD_PAGE or PF_SPREAD_SLAB (as for
* tasks in a cpuset with is_spread_page or is_spread_slab set),
@@ -2494,16 +2495,27 @@
* See kmem_cache_alloc_node().
*/
-int cpuset_mem_spread_node(void)
+static int cpuset_spread_node(int *rotor)
{
int node;
- node = next_node(current->cpuset_mem_spread_rotor, current->mems_allowed);
+ node = next_node(*rotor, current->mems_allowed);
if (node == MAX_NUMNODES)
node = first_node(current->mems_allowed);
- current->cpuset_mem_spread_rotor = node;
+ *rotor = node;
return node;
}
+
+int cpuset_mem_spread_node(void)
+{
+ return cpuset_spread_node(¤t->cpuset_mem_spread_rotor);
+}
+
+int cpuset_slab_spread_node(void)
+{
+ return cpuset_spread_node(¤t->cpuset_slab_spread_rotor);
+}
+
EXPORT_SYMBOL_GPL(cpuset_mem_spread_node);
/**
diff --git a/kernel/cred.c b/kernel/cred.c
index 2c24870..a2d5504 100644
--- a/kernel/cred.c
+++ b/kernel/cred.c
@@ -347,66 +347,6 @@
}
/*
- * prepare new credentials for the usermode helper dispatcher
- */
-struct cred *prepare_usermodehelper_creds(void)
-{
-#ifdef CONFIG_KEYS
- struct thread_group_cred *tgcred = NULL;
-#endif
- struct cred *new;
-
-#ifdef CONFIG_KEYS
- tgcred = kzalloc(sizeof(*new->tgcred), GFP_ATOMIC);
- if (!tgcred)
- return NULL;
-#endif
-
- new = kmem_cache_alloc(cred_jar, GFP_ATOMIC);
- if (!new)
- goto free_tgcred;
-
- kdebug("prepare_usermodehelper_creds() alloc %p", new);
-
- memcpy(new, &init_cred, sizeof(struct cred));
-
- atomic_set(&new->usage, 1);
- set_cred_subscribers(new, 0);
- get_group_info(new->group_info);
- get_uid(new->user);
-
-#ifdef CONFIG_KEYS
- new->thread_keyring = NULL;
- new->request_key_auth = NULL;
- new->jit_keyring = KEY_REQKEY_DEFL_DEFAULT;
-
- atomic_set(&tgcred->usage, 1);
- spin_lock_init(&tgcred->lock);
- new->tgcred = tgcred;
-#endif
-
-#ifdef CONFIG_SECURITY
- new->security = NULL;
-#endif
- if (security_prepare_creds(new, &init_cred, GFP_ATOMIC) < 0)
- goto error;
- validate_creds(new);
-
- BUG_ON(atomic_read(&new->usage) != 1);
- return new;
-
-error:
- put_cred(new);
- return NULL;
-
-free_tgcred:
-#ifdef CONFIG_KEYS
- kfree(tgcred);
-#endif
- return NULL;
-}
-
-/*
* Copy credentials for the new process created by fork()
*
* We share if we can, but under some circumstances we have to generate a new
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 5cb7cd1..8bc5eef 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -605,13 +605,13 @@
if (dbg_kdb_mode) {
kgdb_connected = 1;
error = kdb_stub(ks);
+ kgdb_connected = 0;
} else {
error = gdb_serial_stub(ks);
}
if (error == DBG_PASS_EVENT) {
dbg_kdb_mode = !dbg_kdb_mode;
- kgdb_connected = 0;
} else if (error == DBG_SWITCH_CPU_EVENT) {
dbg_cpu_switch(cpu, dbg_switch_cpu);
goto cpu_loop;
diff --git a/kernel/debug/gdbstub.c b/kernel/debug/gdbstub.c
index 4b17b32..e8fd686 100644
--- a/kernel/debug/gdbstub.c
+++ b/kernel/debug/gdbstub.c
@@ -621,10 +621,8 @@
switch (remcom_in_buffer[1]) {
case 's':
case 'f':
- if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10)) {
- error_packet(remcom_out_buffer, -EINVAL);
+ if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10))
break;
- }
i = 0;
remcom_out_buffer[0] = 'm';
@@ -665,10 +663,9 @@
pack_threadid(remcom_out_buffer + 2, thref);
break;
case 'T':
- if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16)) {
- error_packet(remcom_out_buffer, -EINVAL);
+ if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16))
break;
- }
+
ks->threadid = 0;
ptr = remcom_in_buffer + 17;
kgdb_hex2long(&ptr, &ks->threadid);
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index b724c79..ebe4a28 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -1820,9 +1820,8 @@
{
if (argc != 1)
return KDB_ARGCOUNT;
- sysrq_toggle_support(1);
kdb_trap_printk++;
- handle_sysrq(*argv[1], NULL);
+ __handle_sysrq(*argv[1], NULL, 0);
kdb_trap_printk--;
return 0;
@@ -1857,12 +1856,6 @@
}
#if defined(CONFIG_MODULES)
-/* modules using other modules */
-struct module_use {
- struct list_head list;
- struct module *module_which_uses;
-};
-
/*
* kdb_lsmod - This function implements the 'lsmod' command. Lists
* currently loaded kernel modules.
@@ -1889,14 +1882,15 @@
kdb_printf(" (Loading)");
else
kdb_printf(" (Live)");
+ kdb_printf(" 0x%p", mod->module_core);
#ifdef CONFIG_MODULE_UNLOAD
{
struct module_use *use;
kdb_printf(" [ ");
- list_for_each_entry(use, &mod->modules_which_use_me,
- list)
- kdb_printf("%s ", use->module_which_uses->name);
+ list_for_each_entry(use, &mod->source_list,
+ source_list)
+ kdb_printf("%s ", use->target->name);
kdb_printf("]\n");
}
#endif
@@ -2297,6 +2291,9 @@
while (va) {
char buf[80];
+ if (KDB_FLAG(CMD_INTERRUPT))
+ return 0;
+
sprintf(buf, "%s " kdb_machreg_fmt "\n", command, va);
diag = kdb_parse(buf);
if (diag)
diff --git a/kernel/early_res.c b/kernel/early_res.c
index 31aa933..7bfae88 100644
--- a/kernel/early_res.c
+++ b/kernel/early_res.c
@@ -7,6 +7,8 @@
#include <linux/bootmem.h>
#include <linux/mm.h>
#include <linux/early_res.h>
+#include <linux/slab.h>
+#include <linux/kmemleak.h>
/*
* Early reserved memory areas.
@@ -319,6 +321,8 @@
struct early_res *r;
int i;
+ kmemleak_free_part(__va(start), end - start);
+
i = find_overlapped_early(start, end);
r = &early_res[i];
if (i >= max_early_res || r->end != end || r->start != start)
@@ -333,6 +337,8 @@
struct early_res *r;
int i;
+ kmemleak_free_part(__va(start), end - start);
+
if (start == end)
return;
diff --git a/kernel/exec_domain.c b/kernel/exec_domain.c
index c35452c..dd62f8e 100644
--- a/kernel/exec_domain.c
+++ b/kernel/exec_domain.c
@@ -27,7 +27,7 @@
static DEFINE_RWLOCK(exec_domains_lock);
-static u_long ident_map[32] = {
+static unsigned long ident_map[32] = {
0, 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
@@ -56,10 +56,10 @@
}
static struct exec_domain *
-lookup_exec_domain(u_long personality)
+lookup_exec_domain(unsigned int personality)
{
- struct exec_domain * ep;
- u_long pers = personality(personality);
+ unsigned int pers = personality(personality);
+ struct exec_domain *ep;
read_lock(&exec_domains_lock);
for (ep = exec_domains; ep; ep = ep->next) {
@@ -70,7 +70,7 @@
#ifdef CONFIG_MODULES
read_unlock(&exec_domains_lock);
- request_module("personality-%ld", pers);
+ request_module("personality-%d", pers);
read_lock(&exec_domains_lock);
for (ep = exec_domains; ep; ep = ep->next) {
@@ -135,7 +135,7 @@
}
int
-__set_personality(u_long personality)
+__set_personality(unsigned int personality)
{
struct exec_domain *ep, *oep;
@@ -188,9 +188,9 @@
module_init(proc_execdomains_init);
#endif
-SYSCALL_DEFINE1(personality, u_long, personality)
+SYSCALL_DEFINE1(personality, unsigned int, personality)
{
- u_long old = current->personality;
+ unsigned int old = current->personality;
if (personality != 0xffffffff) {
set_personality(personality);
@@ -198,7 +198,7 @@
return -EINVAL;
}
- return (long)old;
+ return old;
}
diff --git a/kernel/exit.c b/kernel/exit.c
index 019a284..ceffc67 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -58,11 +58,11 @@
static void exit_mm(struct task_struct * tsk);
-static void __unhash_process(struct task_struct *p)
+static void __unhash_process(struct task_struct *p, bool group_dead)
{
nr_threads--;
detach_pid(p, PIDTYPE_PID);
- if (thread_group_leader(p)) {
+ if (group_dead) {
detach_pid(p, PIDTYPE_PGID);
detach_pid(p, PIDTYPE_SID);
@@ -79,10 +79,9 @@
static void __exit_signal(struct task_struct *tsk)
{
struct signal_struct *sig = tsk->signal;
+ bool group_dead = thread_group_leader(tsk);
struct sighand_struct *sighand;
-
- BUG_ON(!sig);
- BUG_ON(!atomic_read(&sig->count));
+ struct tty_struct *uninitialized_var(tty);
sighand = rcu_dereference_check(tsk->sighand,
rcu_read_lock_held() ||
@@ -90,14 +89,16 @@
spin_lock(&sighand->siglock);
posix_cpu_timers_exit(tsk);
- if (atomic_dec_and_test(&sig->count))
+ if (group_dead) {
posix_cpu_timers_exit_group(tsk);
- else {
+ tty = sig->tty;
+ sig->tty = NULL;
+ } else {
/*
* If there is any task waiting for the group exit
* then notify it:
*/
- if (sig->group_exit_task && atomic_read(&sig->count) == sig->notify_count)
+ if (sig->notify_count > 0 && !--sig->notify_count)
wake_up_process(sig->group_exit_task);
if (tsk == sig->curr_target)
@@ -123,32 +124,24 @@
sig->oublock += task_io_get_oublock(tsk);
task_io_accounting_add(&sig->ioac, &tsk->ioac);
sig->sum_sched_runtime += tsk->se.sum_exec_runtime;
- sig = NULL; /* Marker for below. */
}
- __unhash_process(tsk);
+ sig->nr_threads--;
+ __unhash_process(tsk, group_dead);
/*
* Do this under ->siglock, we can race with another thread
* doing sigqueue_free() if we have SIGQUEUE_PREALLOC signals.
*/
flush_sigqueue(&tsk->pending);
-
- tsk->signal = NULL;
tsk->sighand = NULL;
spin_unlock(&sighand->siglock);
__cleanup_sighand(sighand);
clear_tsk_thread_flag(tsk,TIF_SIGPENDING);
- if (sig) {
+ if (group_dead) {
flush_sigqueue(&sig->shared_pending);
- taskstats_tgid_free(sig);
- /*
- * Make sure ->signal can't go away under rq->lock,
- * see account_group_exec_runtime().
- */
- task_rq_unlock_wait(tsk);
- __cleanup_signal(sig);
+ tty_kref_put(tty);
}
}
@@ -856,12 +849,9 @@
tsk->exit_state = signal == DEATH_REAP ? EXIT_DEAD : EXIT_ZOMBIE;
- /* mt-exec, de_thread() is waiting for us */
- if (thread_group_leader(tsk) &&
- tsk->signal->group_exit_task &&
- tsk->signal->notify_count < 0)
+ /* mt-exec, de_thread() is waiting for group leader */
+ if (unlikely(tsk->signal->notify_count < 0))
wake_up_process(tsk->signal->group_exit_task);
-
write_unlock_irq(&tasklist_lock);
tracehook_report_death(tsk, signal, cookie, group_dead);
diff --git a/kernel/fork.c b/kernel/fork.c
index 4d57d9e..b6cce14 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -165,6 +165,18 @@
}
EXPORT_SYMBOL(free_task);
+static inline void free_signal_struct(struct signal_struct *sig)
+{
+ taskstats_tgid_free(sig);
+ kmem_cache_free(signal_cachep, sig);
+}
+
+static inline void put_signal_struct(struct signal_struct *sig)
+{
+ if (atomic_dec_and_test(&sig->sigcnt))
+ free_signal_struct(sig);
+}
+
void __put_task_struct(struct task_struct *tsk)
{
WARN_ON(!tsk->exit_state);
@@ -173,6 +185,7 @@
exit_creds(tsk);
delayacct_tsk_free(tsk);
+ put_signal_struct(tsk->signal);
if (!profile_handoff_task(tsk))
free_task(tsk);
@@ -864,8 +877,9 @@
if (!sig)
return -ENOMEM;
- atomic_set(&sig->count, 1);
+ sig->nr_threads = 1;
atomic_set(&sig->live, 1);
+ atomic_set(&sig->sigcnt, 1);
init_waitqueue_head(&sig->wait_chldexit);
if (clone_flags & CLONE_NEWPID)
sig->flags |= SIGNAL_UNKILLABLE;
@@ -889,13 +903,6 @@
return 0;
}
-void __cleanup_signal(struct signal_struct *sig)
-{
- thread_group_cputime_free(sig);
- tty_kref_put(sig->tty);
- kmem_cache_free(signal_cachep, sig);
-}
-
static void copy_flags(unsigned long clone_flags, struct task_struct *p)
{
unsigned long new_flags = p->flags;
@@ -1245,8 +1252,9 @@
}
if (clone_flags & CLONE_THREAD) {
- atomic_inc(¤t->signal->count);
+ current->signal->nr_threads++;
atomic_inc(¤t->signal->live);
+ atomic_inc(¤t->signal->sigcnt);
p->group_leader = current->group_leader;
list_add_tail_rcu(&p->thread_group, &p->group_leader->thread_group);
}
@@ -1259,7 +1267,6 @@
p->nsproxy->pid_ns->child_reaper = p;
p->signal->leader_pid = pid;
- tty_kref_put(p->signal->tty);
p->signal->tty = tty_kref_get(current->signal->tty);
attach_pid(p, PIDTYPE_PGID, task_pgrp(current));
attach_pid(p, PIDTYPE_SID, task_session(current));
@@ -1292,7 +1299,7 @@
mmput(p->mm);
bad_fork_cleanup_signal:
if (!(clone_flags & CLONE_THREAD))
- __cleanup_signal(p->signal);
+ free_signal_struct(p->signal);
bad_fork_cleanup_sighand:
__cleanup_sighand(p->sighand);
bad_fork_cleanup_fs:
@@ -1327,6 +1334,16 @@
return regs;
}
+static inline void init_idle_pids(struct pid_link *links)
+{
+ enum pid_type type;
+
+ for (type = PIDTYPE_PID; type < PIDTYPE_MAX; ++type) {
+ INIT_HLIST_NODE(&links[type].node); /* not really needed */
+ links[type].pid = &init_struct_pid;
+ }
+}
+
struct task_struct * __cpuinit fork_idle(int cpu)
{
struct task_struct *task;
@@ -1334,8 +1351,10 @@
task = copy_process(CLONE_VM, 0, idle_regs(®s), 0, NULL,
&init_struct_pid, 0);
- if (!IS_ERR(task))
+ if (!IS_ERR(task)) {
+ init_idle_pids(task->pids);
init_idle(task, cpu);
+ }
return task;
}
@@ -1507,14 +1526,6 @@
*flags_ptr |= CLONE_SIGHAND;
/*
- * If unsharing signal handlers and the task was created
- * using CLONE_THREAD, then must unshare the thread
- */
- if ((*flags_ptr & CLONE_SIGHAND) &&
- (atomic_read(¤t->signal->count) > 1))
- *flags_ptr |= CLONE_THREAD;
-
- /*
* If unsharing namespace, must also unshare filesystem information.
*/
if (*flags_ptr & CLONE_NEWNS)
diff --git a/kernel/futex.c b/kernel/futex.c
index e7a35f1..6a3a5fa 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -429,20 +429,11 @@
static struct task_struct * futex_find_get_task(pid_t pid)
{
struct task_struct *p;
- const struct cred *cred = current_cred(), *pcred;
rcu_read_lock();
p = find_task_by_vpid(pid);
- if (!p) {
- p = ERR_PTR(-ESRCH);
- } else {
- pcred = __task_cred(p);
- if (cred->euid != pcred->euid &&
- cred->euid != pcred->uid)
- p = ERR_PTR(-ESRCH);
- else
- get_task_struct(p);
- }
+ if (p)
+ get_task_struct(p);
rcu_read_unlock();
@@ -564,8 +555,8 @@
if (!pid)
return -ESRCH;
p = futex_find_get_task(pid);
- if (IS_ERR(p))
- return PTR_ERR(p);
+ if (!p)
+ return -ESRCH;
/*
* We need to look at the task state flags to figure out,
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index b9b134b..5c69e99 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -89,7 +89,7 @@
do {
seq = read_seqbegin(&xtime_lock);
- xts = current_kernel_time();
+ xts = __current_kernel_time();
tom = wall_to_monotonic;
} while (read_seqretry(&xtime_lock, seq));
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 3164ba7..e149748 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -456,6 +456,9 @@
/* note that IRQF_TRIGGER_MASK == IRQ_TYPE_SENSE_MASK */
desc->status &= ~(IRQ_LEVEL | IRQ_TYPE_SENSE_MASK);
desc->status |= flags;
+
+ if (chip != desc->chip)
+ irq_chip_set_defaults(desc->chip);
}
return ret;
diff --git a/kernel/kexec.c b/kernel/kexec.c
index 474a847..131b170 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -1089,9 +1089,10 @@
size_t crash_get_memory_size(void)
{
- size_t size;
+ size_t size = 0;
mutex_lock(&kexec_mutex);
- size = crashk_res.end - crashk_res.start + 1;
+ if (crashk_res.end != crashk_res.start)
+ size = crashk_res.end - crashk_res.start + 1;
mutex_unlock(&kexec_mutex);
return size;
}
@@ -1134,7 +1135,7 @@
free_reserved_phys_range(end, crashk_res.end);
- if (start == end)
+ if ((start == end) && (crashk_res.parent != NULL))
release_resource(&crashk_res);
crashk_res.end = end - 1;
diff --git a/kernel/kmod.c b/kernel/kmod.c
index bf0e231..6e9b196 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -116,27 +116,16 @@
trace_module_request(module_name, wait, _RET_IP_);
- ret = call_usermodehelper(modprobe_path, argv, envp,
- wait ? UMH_WAIT_PROC : UMH_WAIT_EXEC);
+ ret = call_usermodehelper_fns(modprobe_path, argv, envp,
+ wait ? UMH_WAIT_PROC : UMH_WAIT_EXEC,
+ NULL, NULL, NULL);
+
atomic_dec(&kmod_concurrent);
return ret;
}
EXPORT_SYMBOL(__request_module);
#endif /* CONFIG_MODULES */
-struct subprocess_info {
- struct work_struct work;
- struct completion *complete;
- struct cred *cred;
- char *path;
- char **argv;
- char **envp;
- enum umh_wait wait;
- int retval;
- struct file *stdin;
- void (*cleanup)(char **argv, char **envp);
-};
-
/*
* This is the task which runs the usermode application
*/
@@ -145,36 +134,10 @@
struct subprocess_info *sub_info = data;
int retval;
- BUG_ON(atomic_read(&sub_info->cred->usage) != 1);
-
- /* Unblock all signals */
spin_lock_irq(¤t->sighand->siglock);
flush_signal_handlers(current, 1);
- sigemptyset(¤t->blocked);
- recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- /* Install the credentials */
- commit_creds(sub_info->cred);
- sub_info->cred = NULL;
-
- /* Install input pipe when needed */
- if (sub_info->stdin) {
- struct files_struct *f = current->files;
- struct fdtable *fdt;
- /* no races because files should be private here */
- sys_close(0);
- fd_install(0, sub_info->stdin);
- spin_lock(&f->file_lock);
- fdt = files_fdtable(f);
- FD_SET(0, fdt->open_fds);
- FD_CLR(0, fdt->close_on_exec);
- spin_unlock(&f->file_lock);
-
- /* and disallow core files too */
- current->signal->rlim[RLIMIT_CORE] = (struct rlimit){0, 0};
- }
-
/* We can run anywhere, unlike our parent keventd(). */
set_cpus_allowed_ptr(current, cpu_all_mask);
@@ -184,9 +147,16 @@
*/
set_user_nice(current, 0);
+ if (sub_info->init) {
+ retval = sub_info->init(sub_info);
+ if (retval)
+ goto fail;
+ }
+
retval = kernel_execve(sub_info->path, sub_info->argv, sub_info->envp);
/* Exec failed? */
+fail:
sub_info->retval = retval;
do_exit(0);
}
@@ -194,9 +164,7 @@
void call_usermodehelper_freeinfo(struct subprocess_info *info)
{
if (info->cleanup)
- (*info->cleanup)(info->argv, info->envp);
- if (info->cred)
- put_cred(info->cred);
+ (*info->cleanup)(info);
kfree(info);
}
EXPORT_SYMBOL(call_usermodehelper_freeinfo);
@@ -207,16 +175,16 @@
struct subprocess_info *sub_info = data;
pid_t pid;
- /* Install a handler: if SIGCLD isn't handled sys_wait4 won't
- * populate the status, but will return -ECHILD. */
- allow_signal(SIGCHLD);
+ /* If SIGCLD is ignored sys_wait4 won't populate the status. */
+ spin_lock_irq(¤t->sighand->siglock);
+ current->sighand->action[SIGCHLD-1].sa.sa_handler = SIG_DFL;
+ spin_unlock_irq(¤t->sighand->siglock);
pid = kernel_thread(____call_usermodehelper, sub_info, SIGCHLD);
if (pid < 0) {
sub_info->retval = pid;
} else {
- int ret;
-
+ int ret = -ECHILD;
/*
* Normally it is bogus to call wait4() from in-kernel because
* wait4() wants to write the exit code to a userspace address.
@@ -237,10 +205,7 @@
sub_info->retval = ret;
}
- if (sub_info->wait == UMH_NO_WAIT)
- call_usermodehelper_freeinfo(sub_info);
- else
- complete(sub_info->complete);
+ complete(sub_info->complete);
return 0;
}
@@ -249,15 +214,13 @@
{
struct subprocess_info *sub_info =
container_of(work, struct subprocess_info, work);
- pid_t pid;
enum umh_wait wait = sub_info->wait;
-
- BUG_ON(atomic_read(&sub_info->cred->usage) != 1);
+ pid_t pid;
/* CLONE_VFORK: wait until the usermode helper has execve'd
* successfully We need the data structures to stay around
* until that is done. */
- if (wait == UMH_WAIT_PROC || wait == UMH_NO_WAIT)
+ if (wait == UMH_WAIT_PROC)
pid = kernel_thread(wait_for_helper, sub_info,
CLONE_FS | CLONE_FILES | SIGCHLD);
else
@@ -266,15 +229,16 @@
switch (wait) {
case UMH_NO_WAIT:
+ call_usermodehelper_freeinfo(sub_info);
break;
case UMH_WAIT_PROC:
if (pid > 0)
break;
- sub_info->retval = pid;
/* FALLTHROUGH */
-
case UMH_WAIT_EXEC:
+ if (pid < 0)
+ sub_info->retval = pid;
complete(sub_info->complete);
}
}
@@ -376,80 +340,37 @@
sub_info->path = path;
sub_info->argv = argv;
sub_info->envp = envp;
- sub_info->cred = prepare_usermodehelper_creds();
- if (!sub_info->cred) {
- kfree(sub_info);
- return NULL;
- }
-
out:
return sub_info;
}
EXPORT_SYMBOL(call_usermodehelper_setup);
/**
- * call_usermodehelper_setkeys - set the session keys for usermode helper
- * @info: a subprocess_info returned by call_usermodehelper_setup
- * @session_keyring: the session keyring for the process
- */
-void call_usermodehelper_setkeys(struct subprocess_info *info,
- struct key *session_keyring)
-{
-#ifdef CONFIG_KEYS
- struct thread_group_cred *tgcred = info->cred->tgcred;
- key_put(tgcred->session_keyring);
- tgcred->session_keyring = key_get(session_keyring);
-#else
- BUG();
-#endif
-}
-EXPORT_SYMBOL(call_usermodehelper_setkeys);
-
-/**
- * call_usermodehelper_setcleanup - set a cleanup function
+ * call_usermodehelper_setfns - set a cleanup/init function
* @info: a subprocess_info returned by call_usermodehelper_setup
* @cleanup: a cleanup function
+ * @init: an init function
+ * @data: arbitrary context sensitive data
*
- * The cleanup function is just befor ethe subprocess_info is about to
+ * The init function is used to customize the helper process prior to
+ * exec. A non-zero return code causes the process to error out, exit,
+ * and return the failure to the calling process
+ *
+ * The cleanup function is just before ethe subprocess_info is about to
* be freed. This can be used for freeing the argv and envp. The
* Function must be runnable in either a process context or the
* context in which call_usermodehelper_exec is called.
*/
-void call_usermodehelper_setcleanup(struct subprocess_info *info,
- void (*cleanup)(char **argv, char **envp))
+void call_usermodehelper_setfns(struct subprocess_info *info,
+ int (*init)(struct subprocess_info *info),
+ void (*cleanup)(struct subprocess_info *info),
+ void *data)
{
info->cleanup = cleanup;
+ info->init = init;
+ info->data = data;
}
-EXPORT_SYMBOL(call_usermodehelper_setcleanup);
-
-/**
- * call_usermodehelper_stdinpipe - set up a pipe to be used for stdin
- * @sub_info: a subprocess_info returned by call_usermodehelper_setup
- * @filp: set to the write-end of a pipe
- *
- * This constructs a pipe, and sets the read end to be the stdin of the
- * subprocess, and returns the write-end in *@filp.
- */
-int call_usermodehelper_stdinpipe(struct subprocess_info *sub_info,
- struct file **filp)
-{
- struct file *f;
-
- f = create_write_pipe(0);
- if (IS_ERR(f))
- return PTR_ERR(f);
- *filp = f;
-
- f = create_read_pipe(f, 0);
- if (IS_ERR(f)) {
- free_write_pipe(*filp);
- return PTR_ERR(f);
- }
- sub_info->stdin = f;
-
- return 0;
-}
-EXPORT_SYMBOL(call_usermodehelper_stdinpipe);
+EXPORT_SYMBOL(call_usermodehelper_setfns);
/**
* call_usermodehelper_exec - start a usermode application
@@ -469,9 +390,6 @@
DECLARE_COMPLETION_ONSTACK(done);
int retval = 0;
- BUG_ON(atomic_read(&sub_info->cred->usage) != 1);
- validate_creds(sub_info->cred);
-
helper_lock();
if (sub_info->path[0] == '\0')
goto out;
@@ -498,41 +416,6 @@
}
EXPORT_SYMBOL(call_usermodehelper_exec);
-/**
- * call_usermodehelper_pipe - call a usermode helper process with a pipe stdin
- * @path: path to usermode executable
- * @argv: arg vector for process
- * @envp: environment for process
- * @filp: set to the write-end of a pipe
- *
- * This is a simple wrapper which executes a usermode-helper function
- * with a pipe as stdin. It is implemented entirely in terms of
- * lower-level call_usermodehelper_* functions.
- */
-int call_usermodehelper_pipe(char *path, char **argv, char **envp,
- struct file **filp)
-{
- struct subprocess_info *sub_info;
- int ret;
-
- sub_info = call_usermodehelper_setup(path, argv, envp, GFP_KERNEL);
- if (sub_info == NULL)
- return -ENOMEM;
-
- ret = call_usermodehelper_stdinpipe(sub_info, filp);
- if (ret < 0) {
- call_usermodehelper_freeinfo(sub_info);
- return ret;
- }
-
- ret = call_usermodehelper_exec(sub_info, UMH_WAIT_EXEC);
- if (ret < 0) /* Failed to execute helper, close pipe */
- filp_close(*filp, NULL);
-
- return ret;
-}
-EXPORT_SYMBOL(call_usermodehelper_pipe);
-
void __init usermodehelper_init(void)
{
khelper_wq = create_singlethread_workqueue("khelper");
diff --git a/kernel/module.c b/kernel/module.c
index 333fbcc..5d2d281 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -72,7 +72,11 @@
/* If this is set, the section belongs in the init part of the module */
#define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
-/* List of modules, protected by module_mutex or preempt_disable
+/*
+ * Mutex protects:
+ * 1) List of modules (also safely readable with preempt_disable),
+ * 2) module_use links,
+ * 3) module_addr_min/module_addr_max.
* (delete uses stop_machine/add uses RCU list operations). */
DEFINE_MUTEX(module_mutex);
EXPORT_SYMBOL_GPL(module_mutex);
@@ -90,7 +94,8 @@
static BLOCKING_NOTIFIER_HEAD(module_notify_list);
-/* Bounds of module allocation, for speeding __module_address */
+/* Bounds of module allocation, for speeding __module_address.
+ * Protected by module_mutex. */
static unsigned long module_addr_min = -1UL, module_addr_max = 0;
int register_module_notifier(struct notifier_block * nb)
@@ -329,7 +334,7 @@
}
/* Find a symbol and return it, along with, (optional) crc and
- * (optional) module which owns it */
+ * (optional) module which owns it. Needs preempt disabled or module_mutex. */
const struct kernel_symbol *find_symbol(const char *name,
struct module **owner,
const unsigned long **crc,
@@ -403,7 +408,7 @@
Elf_Shdr *sechdrs,
const char *secstrings)
{
- return find_sec(hdr, sechdrs, secstrings, ".data.percpu");
+ return find_sec(hdr, sechdrs, secstrings, ".data..percpu");
}
static void percpu_modcopy(struct module *mod,
@@ -523,7 +528,8 @@
{
int cpu;
- INIT_LIST_HEAD(&mod->modules_which_use_me);
+ INIT_LIST_HEAD(&mod->source_list);
+ INIT_LIST_HEAD(&mod->target_list);
for_each_possible_cpu(cpu) {
per_cpu_ptr(mod->refptr, cpu)->incs = 0;
per_cpu_ptr(mod->refptr, cpu)->decs = 0;
@@ -535,20 +541,13 @@
mod->waiter = current;
}
-/* modules using other modules */
-struct module_use
-{
- struct list_head list;
- struct module *module_which_uses;
-};
-
/* Does a already use b? */
static int already_uses(struct module *a, struct module *b)
{
struct module_use *use;
- list_for_each_entry(use, &b->modules_which_use_me, list) {
- if (use->module_which_uses == a) {
+ list_for_each_entry(use, &b->source_list, source_list) {
+ if (use->source == a) {
DEBUGP("%s uses %s!\n", a->name, b->name);
return 1;
}
@@ -557,62 +556,68 @@
return 0;
}
-/* Module a uses b */
-int use_module(struct module *a, struct module *b)
+/*
+ * Module a uses b
+ * - we add 'a' as a "source", 'b' as a "target" of module use
+ * - the module_use is added to the list of 'b' sources (so
+ * 'b' can walk the list to see who sourced them), and of 'a'
+ * targets (so 'a' can see what modules it targets).
+ */
+static int add_module_usage(struct module *a, struct module *b)
{
struct module_use *use;
- int no_warn, err;
-
- if (b == NULL || already_uses(a, b)) return 1;
-
- /* If we're interrupted or time out, we fail. */
- if (wait_event_interruptible_timeout(
- module_wq, (err = strong_try_module_get(b)) != -EBUSY,
- 30 * HZ) <= 0) {
- printk("%s: gave up waiting for init of module %s.\n",
- a->name, b->name);
- return 0;
- }
-
- /* If strong_try_module_get() returned a different error, we fail. */
- if (err)
- return 0;
DEBUGP("Allocating new usage for %s.\n", a->name);
use = kmalloc(sizeof(*use), GFP_ATOMIC);
if (!use) {
- printk("%s: out of memory loading\n", a->name);
- module_put(b);
- return 0;
+ printk(KERN_WARNING "%s: out of memory loading\n", a->name);
+ return -ENOMEM;
}
- use->module_which_uses = a;
- list_add(&use->list, &b->modules_which_use_me);
- no_warn = sysfs_create_link(b->holders_dir, &a->mkobj.kobj, a->name);
- return 1;
+ use->source = a;
+ use->target = b;
+ list_add(&use->source_list, &b->source_list);
+ list_add(&use->target_list, &a->target_list);
+ return 0;
}
-EXPORT_SYMBOL_GPL(use_module);
+
+/* Module a uses b: caller needs module_mutex() */
+int ref_module(struct module *a, struct module *b)
+{
+ int err;
+
+ if (b == NULL || already_uses(a, b))
+ return 0;
+
+ /* If module isn't available, we fail. */
+ err = strong_try_module_get(b);
+ if (err)
+ return err;
+
+ err = add_module_usage(a, b);
+ if (err) {
+ module_put(b);
+ return err;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ref_module);
/* Clear the unload stuff of the module. */
static void module_unload_free(struct module *mod)
{
- struct module *i;
+ struct module_use *use, *tmp;
- list_for_each_entry(i, &modules, list) {
- struct module_use *use;
-
- list_for_each_entry(use, &i->modules_which_use_me, list) {
- if (use->module_which_uses == mod) {
- DEBUGP("%s unusing %s\n", mod->name, i->name);
- module_put(i);
- list_del(&use->list);
- kfree(use);
- sysfs_remove_link(i->holders_dir, mod->name);
- /* There can be at most one match. */
- break;
- }
- }
+ mutex_lock(&module_mutex);
+ list_for_each_entry_safe(use, tmp, &mod->target_list, target_list) {
+ struct module *i = use->target;
+ DEBUGP("%s unusing %s\n", mod->name, i->name);
+ module_put(i);
+ list_del(&use->source_list);
+ list_del(&use->target_list);
+ kfree(use);
}
+ mutex_unlock(&module_mutex);
}
#ifdef CONFIG_MODULE_FORCE_UNLOAD
@@ -735,7 +740,7 @@
goto out;
}
- if (!list_empty(&mod->modules_which_use_me)) {
+ if (!list_empty(&mod->source_list)) {
/* Other modules depend on us: get rid of them first. */
ret = -EWOULDBLOCK;
goto out;
@@ -779,13 +784,14 @@
blocking_notifier_call_chain(&module_notify_list,
MODULE_STATE_GOING, mod);
async_synchronize_full();
- mutex_lock(&module_mutex);
+
/* Store the name of the last unloaded module for diagnostic purposes */
strlcpy(last_unloaded_module, mod->name, sizeof(last_unloaded_module));
ddebug_remove_module(mod->name);
- free_module(mod);
- out:
+ free_module(mod);
+ return 0;
+out:
mutex_unlock(&module_mutex);
return ret;
}
@@ -799,9 +805,9 @@
/* Always include a trailing , so userspace can differentiate
between this and the old multi-field proc format. */
- list_for_each_entry(use, &mod->modules_which_use_me, list) {
+ list_for_each_entry(use, &mod->source_list, source_list) {
printed_something = 1;
- seq_printf(m, "%s,", use->module_which_uses->name);
+ seq_printf(m, "%s,", use->source->name);
}
if (mod->init != NULL && mod->exit == NULL) {
@@ -880,11 +886,11 @@
{
}
-int use_module(struct module *a, struct module *b)
+int ref_module(struct module *a, struct module *b)
{
- return strong_try_module_get(b) == 0;
+ return strong_try_module_get(b);
}
-EXPORT_SYMBOL_GPL(use_module);
+EXPORT_SYMBOL_GPL(ref_module);
static inline void module_unload_init(struct module *mod)
{
@@ -1001,6 +1007,8 @@
{
const unsigned long *crc;
+ /* Since this should be found in kernel (which can't be removed),
+ * no locking is necessary. */
if (!find_symbol(MODULE_SYMBOL_PREFIX "module_layout", NULL,
&crc, true, false))
BUG();
@@ -1043,29 +1051,62 @@
}
#endif /* CONFIG_MODVERSIONS */
-/* Resolve a symbol for this module. I.e. if we find one, record usage.
- Must be holding module_mutex. */
+/* Resolve a symbol for this module. I.e. if we find one, record usage. */
static const struct kernel_symbol *resolve_symbol(Elf_Shdr *sechdrs,
unsigned int versindex,
const char *name,
- struct module *mod)
+ struct module *mod,
+ char ownername[])
{
struct module *owner;
const struct kernel_symbol *sym;
const unsigned long *crc;
+ int err;
+ mutex_lock(&module_mutex);
sym = find_symbol(name, &owner, &crc,
!(mod->taints & (1 << TAINT_PROPRIETARY_MODULE)), true);
- /* use_module can fail due to OOM,
- or module initialization or unloading */
- if (sym) {
- if (!check_version(sechdrs, versindex, name, mod, crc, owner)
- || !use_module(mod, owner))
- sym = NULL;
+ if (!sym)
+ goto unlock;
+
+ if (!check_version(sechdrs, versindex, name, mod, crc, owner)) {
+ sym = ERR_PTR(-EINVAL);
+ goto getname;
}
+
+ err = ref_module(mod, owner);
+ if (err) {
+ sym = ERR_PTR(err);
+ goto getname;
+ }
+
+getname:
+ /* We must make copy under the lock if we failed to get ref. */
+ strncpy(ownername, module_name(owner), MODULE_NAME_LEN);
+unlock:
+ mutex_unlock(&module_mutex);
return sym;
}
+static const struct kernel_symbol *resolve_symbol_wait(Elf_Shdr *sechdrs,
+ unsigned int versindex,
+ const char *name,
+ struct module *mod)
+{
+ const struct kernel_symbol *ksym;
+ char ownername[MODULE_NAME_LEN];
+
+ if (wait_event_interruptible_timeout(module_wq,
+ !IS_ERR(ksym = resolve_symbol(sechdrs, versindex, name,
+ mod, ownername)) ||
+ PTR_ERR(ksym) != -EBUSY,
+ 30 * HZ) <= 0) {
+ printk(KERN_WARNING "%s: gave up waiting for init of module %s.\n",
+ mod->name, ownername);
+ }
+ return ksym;
+}
+
/*
* /sys/module/foo/sections stuff
* J. Corbet <corbet@lwn.net>
@@ -1295,7 +1336,34 @@
#endif
#ifdef CONFIG_SYSFS
-int module_add_modinfo_attrs(struct module *mod)
+static void add_usage_links(struct module *mod)
+{
+#ifdef CONFIG_MODULE_UNLOAD
+ struct module_use *use;
+ int nowarn;
+
+ mutex_lock(&module_mutex);
+ list_for_each_entry(use, &mod->target_list, target_list) {
+ nowarn = sysfs_create_link(use->target->holders_dir,
+ &mod->mkobj.kobj, mod->name);
+ }
+ mutex_unlock(&module_mutex);
+#endif
+}
+
+static void del_usage_links(struct module *mod)
+{
+#ifdef CONFIG_MODULE_UNLOAD
+ struct module_use *use;
+
+ mutex_lock(&module_mutex);
+ list_for_each_entry(use, &mod->target_list, target_list)
+ sysfs_remove_link(use->target->holders_dir, mod->name);
+ mutex_unlock(&module_mutex);
+#endif
+}
+
+static int module_add_modinfo_attrs(struct module *mod)
{
struct module_attribute *attr;
struct module_attribute *temp_attr;
@@ -1321,7 +1389,7 @@
return error;
}
-void module_remove_modinfo_attrs(struct module *mod)
+static void module_remove_modinfo_attrs(struct module *mod)
{
struct module_attribute *attr;
int i;
@@ -1337,7 +1405,7 @@
kfree(mod->modinfo_attrs);
}
-int mod_sysfs_init(struct module *mod)
+static int mod_sysfs_init(struct module *mod)
{
int err;
struct kobject *kobj;
@@ -1371,12 +1439,16 @@
return err;
}
-int mod_sysfs_setup(struct module *mod,
+static int mod_sysfs_setup(struct module *mod,
struct kernel_param *kparam,
unsigned int num_params)
{
int err;
+ err = mod_sysfs_init(mod);
+ if (err)
+ goto out;
+
mod->holders_dir = kobject_create_and_add("holders", &mod->mkobj.kobj);
if (!mod->holders_dir) {
err = -ENOMEM;
@@ -1391,6 +1463,8 @@
if (err)
goto out_unreg_param;
+ add_usage_links(mod);
+
kobject_uevent(&mod->mkobj.kobj, KOBJ_ADD);
return 0;
@@ -1400,6 +1474,7 @@
kobject_put(mod->holders_dir);
out_unreg:
kobject_put(&mod->mkobj.kobj);
+out:
return err;
}
@@ -1410,14 +1485,40 @@
#else /* CONFIG_SYSFS */
+static inline int mod_sysfs_init(struct module *mod)
+{
+ return 0;
+}
+
+static inline int mod_sysfs_setup(struct module *mod,
+ struct kernel_param *kparam,
+ unsigned int num_params)
+{
+ return 0;
+}
+
+static inline int module_add_modinfo_attrs(struct module *mod)
+{
+ return 0;
+}
+
+static inline void module_remove_modinfo_attrs(struct module *mod)
+{
+}
+
static void mod_sysfs_fini(struct module *mod)
{
}
+static void del_usage_links(struct module *mod)
+{
+}
+
#endif /* CONFIG_SYSFS */
static void mod_kobject_remove(struct module *mod)
{
+ del_usage_links(mod);
module_remove_modinfo_attrs(mod);
module_param_sysfs_remove(mod);
kobject_put(mod->mkobj.drivers_dir);
@@ -1436,13 +1537,15 @@
return 0;
}
-/* Free a module, remove from lists, etc (must hold module_mutex). */
+/* Free a module, remove from lists, etc. */
static void free_module(struct module *mod)
{
trace_module_free(mod);
/* Delete from various lists */
+ mutex_lock(&module_mutex);
stop_machine(__unlink_module, mod, NULL);
+ mutex_unlock(&module_mutex);
remove_notes_attrs(mod);
remove_sect_attrs(mod);
mod_kobject_remove(mod);
@@ -1493,6 +1596,8 @@
/*
* Ensure that an exported symbol [global namespace] does not already exist
* in the kernel or in some other module's exported symbol table.
+ *
+ * You must hold the module_mutex.
*/
static int verify_export_symbols(struct module *mod)
{
@@ -1558,21 +1663,23 @@
break;
case SHN_UNDEF:
- ksym = resolve_symbol(sechdrs, versindex,
- strtab + sym[i].st_name, mod);
+ ksym = resolve_symbol_wait(sechdrs, versindex,
+ strtab + sym[i].st_name,
+ mod);
/* Ok if resolved. */
- if (ksym) {
+ if (ksym && !IS_ERR(ksym)) {
sym[i].st_value = ksym->value;
break;
}
/* Ok if weak. */
- if (ELF_ST_BIND(sym[i].st_info) == STB_WEAK)
+ if (!ksym && ELF_ST_BIND(sym[i].st_info) == STB_WEAK)
break;
- printk(KERN_WARNING "%s: Unknown symbol %s\n",
- mod->name, strtab + sym[i].st_name);
- ret = -ENOENT;
+ printk(KERN_WARNING "%s: Unknown symbol %s (err %li)\n",
+ mod->name, strtab + sym[i].st_name,
+ PTR_ERR(ksym));
+ ret = PTR_ERR(ksym) ?: -ENOENT;
break;
default:
@@ -1955,16 +2062,24 @@
#endif
}
+static void dynamic_debug_remove(struct _ddebug *debug)
+{
+ if (debug)
+ ddebug_remove_module(debug->modname);
+}
+
static void *module_alloc_update_bounds(unsigned long size)
{
void *ret = module_alloc(size);
if (ret) {
+ mutex_lock(&module_mutex);
/* Update module bounds. */
if ((unsigned long)ret < module_addr_min)
module_addr_min = (unsigned long)ret;
if ((unsigned long)ret + size > module_addr_max)
module_addr_max = (unsigned long)ret + size;
+ mutex_unlock(&module_mutex);
}
return ret;
}
@@ -2014,6 +2129,9 @@
long err = 0;
void *ptr = NULL; /* Stops spurious gcc warning */
unsigned long symoffs, stroffs, *strmap;
+ void __percpu *percpu;
+ struct _ddebug *debug = NULL;
+ unsigned int num_debug = 0;
mm_segment_t old_fs;
@@ -2138,11 +2256,6 @@
goto free_mod;
}
- if (find_module(mod->name)) {
- err = -EEXIST;
- goto free_mod;
- }
-
mod->state = MODULE_STATE_COMING;
/* Allow arches to frob section contents and sizes. */
@@ -2158,6 +2271,8 @@
goto free_mod;
sechdrs[pcpuindex].sh_flags &= ~(unsigned long)SHF_ALLOC;
}
+ /* Keep this around for failure path. */
+ percpu = mod_percpu(mod);
/* Determine total sizes, and put offsets in sh_entsize. For now
this is done generically; there doesn't appear to be any
@@ -2231,11 +2346,6 @@
/* Now we've moved module, initialize linked lists, etc. */
module_unload_init(mod);
- /* add kobject, so we can reference it. */
- err = mod_sysfs_init(mod);
- if (err)
- goto free_unload;
-
/* Set up license info based on the info section */
set_license(mod, get_modinfo(sechdrs, infoindex, "license"));
@@ -2360,11 +2470,6 @@
goto cleanup;
}
- /* Find duplicate symbols */
- err = verify_export_symbols(mod);
- if (err < 0)
- goto cleanup;
-
/* Set up and sort exception table */
mod->extable = section_objs(hdr, sechdrs, secstrings, "__ex_table",
sizeof(*mod->extable), &mod->num_exentries);
@@ -2379,15 +2484,9 @@
kfree(strmap);
strmap = NULL;
- if (!mod->taints) {
- struct _ddebug *debug;
- unsigned int num_debug;
-
+ if (!mod->taints)
debug = section_objs(hdr, sechdrs, secstrings, "__verbose",
sizeof(*debug), &num_debug);
- if (debug)
- dynamic_debug_setup(debug, num_debug);
- }
err = module_finalize(hdr, sechdrs, mod);
if (err < 0)
@@ -2423,7 +2522,22 @@
* function to insert in a way safe to concurrent readers.
* The mutex protects against concurrent writers.
*/
+ mutex_lock(&module_mutex);
+ if (find_module(mod->name)) {
+ err = -EEXIST;
+ goto unlock;
+ }
+
+ if (debug)
+ dynamic_debug_setup(debug, num_debug);
+
+ /* Find duplicate symbols */
+ err = verify_export_symbols(mod);
+ if (err < 0)
+ goto ddebug;
+
list_add_rcu(&mod->list, &modules);
+ mutex_unlock(&module_mutex);
err = parse_args(mod->name, mod->args, mod->kp, mod->num_kp, NULL);
if (err < 0)
@@ -2432,6 +2546,7 @@
err = mod_sysfs_setup(mod, mod->kp, mod->num_kp);
if (err < 0)
goto unlink;
+
add_sect_attrs(mod, hdr->e_shnum, secstrings, sechdrs);
add_notes_attrs(mod, hdr->e_shnum, secstrings, sechdrs);
@@ -2444,15 +2559,17 @@
return mod;
unlink:
+ mutex_lock(&module_mutex);
/* Unlink carefully: kallsyms could be walking list. */
list_del_rcu(&mod->list);
+ ddebug:
+ dynamic_debug_remove(debug);
+ unlock:
+ mutex_unlock(&module_mutex);
synchronize_sched();
module_arch_cleanup(mod);
cleanup:
free_modinfo(mod);
- kobject_del(&mod->mkobj.kobj);
- kobject_put(&mod->mkobj.kobj);
- free_unload:
module_unload_free(mod);
#if defined(CONFIG_MODULE_UNLOAD)
free_percpu(mod->refptr);
@@ -2463,7 +2580,7 @@
module_free(mod, mod->module_core);
/* mod will be freed with core. Don't access it beyond this line! */
free_percpu:
- percpu_modfree(mod);
+ free_percpu(percpu);
free_mod:
kfree(args);
kfree(strmap);
@@ -2499,19 +2616,10 @@
if (!capable(CAP_SYS_MODULE) || modules_disabled)
return -EPERM;
- /* Only one module load at a time, please */
- if (mutex_lock_interruptible(&module_mutex) != 0)
- return -EINTR;
-
/* Do all the hard work */
mod = load_module(umod, len, uargs);
- if (IS_ERR(mod)) {
- mutex_unlock(&module_mutex);
+ if (IS_ERR(mod))
return PTR_ERR(mod);
- }
-
- /* Drop lock so they can recurse */
- mutex_unlock(&module_mutex);
blocking_notifier_call_chain(&module_notify_list,
MODULE_STATE_COMING, mod);
@@ -2528,9 +2636,7 @@
module_put(mod);
blocking_notifier_call_chain(&module_notify_list,
MODULE_STATE_GOING, mod);
- mutex_lock(&module_mutex);
free_module(mod);
- mutex_unlock(&module_mutex);
wake_up(&module_wq);
return ret;
}
diff --git a/kernel/mutex.c b/kernel/mutex.c
index 632f04c..4c0b7b3 100644
--- a/kernel/mutex.c
+++ b/kernel/mutex.c
@@ -172,6 +172,13 @@
struct thread_info *owner;
/*
+ * If we own the BKL, then don't spin. The owner of
+ * the mutex might be waiting on us to release the BKL.
+ */
+ if (unlikely(current->lock_depth >= 0))
+ break;
+
+ /*
* If there's an owner, wait for it to either
* release the lock or go to sleep.
*/
diff --git a/kernel/padata.c b/kernel/padata.c
index b1c9857..fdd8ae6 100644
--- a/kernel/padata.c
+++ b/kernel/padata.c
@@ -659,7 +659,7 @@
err = __padata_add_cpu(pinst, cpu);
mutex_unlock(&pinst->lock);
if (err)
- return NOTIFY_BAD;
+ return notifier_from_errno(err);
break;
case CPU_DOWN_PREPARE:
@@ -670,7 +670,7 @@
err = __padata_remove_cpu(pinst, cpu);
mutex_unlock(&pinst->lock);
if (err)
- return NOTIFY_BAD;
+ return notifier_from_errno(err);
break;
case CPU_UP_CANCELED:
diff --git a/kernel/panic.c b/kernel/panic.c
index dbe13db..3b16cd9 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -87,6 +87,7 @@
*/
preempt_disable();
+ console_verbose();
bust_spinlocks(1);
va_start(args, fmt);
vsnprintf(buf, sizeof(buf), fmt, args);
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index a4fa381..ff86c55 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -283,14 +283,15 @@
static void
list_add_event(struct perf_event *event, struct perf_event_context *ctx)
{
- struct perf_event *group_leader = event->group_leader;
+ WARN_ON_ONCE(event->attach_state & PERF_ATTACH_CONTEXT);
+ event->attach_state |= PERF_ATTACH_CONTEXT;
/*
- * Depending on whether it is a standalone or sibling event,
- * add it straight to the context's event list, or to the group
- * leader's sibling list:
+ * If we're a stand alone event or group leader, we go to the context
+ * list, group events are kept attached to the group so that
+ * perf_group_detach can, at all times, locate all siblings.
*/
- if (group_leader == event) {
+ if (event->group_leader == event) {
struct list_head *list;
if (is_software_event(event))
@@ -298,13 +299,6 @@
list = ctx_group_list(event, ctx);
list_add_tail(&event->group_entry, list);
- } else {
- if (group_leader->group_flags & PERF_GROUP_SOFTWARE &&
- !is_software_event(event))
- group_leader->group_flags &= ~PERF_GROUP_SOFTWARE;
-
- list_add_tail(&event->group_entry, &group_leader->sibling_list);
- group_leader->nr_siblings++;
}
list_add_rcu(&event->event_entry, &ctx->event_list);
@@ -313,6 +307,24 @@
ctx->nr_stat++;
}
+static void perf_group_attach(struct perf_event *event)
+{
+ struct perf_event *group_leader = event->group_leader;
+
+ WARN_ON_ONCE(event->attach_state & PERF_ATTACH_GROUP);
+ event->attach_state |= PERF_ATTACH_GROUP;
+
+ if (group_leader == event)
+ return;
+
+ if (group_leader->group_flags & PERF_GROUP_SOFTWARE &&
+ !is_software_event(event))
+ group_leader->group_flags &= ~PERF_GROUP_SOFTWARE;
+
+ list_add_tail(&event->group_entry, &group_leader->sibling_list);
+ group_leader->nr_siblings++;
+}
+
/*
* Remove a event from the lists for its context.
* Must be called with ctx->mutex and ctx->lock held.
@@ -320,17 +332,22 @@
static void
list_del_event(struct perf_event *event, struct perf_event_context *ctx)
{
- if (list_empty(&event->group_entry))
+ /*
+ * We can have double detach due to exit/hot-unplug + close.
+ */
+ if (!(event->attach_state & PERF_ATTACH_CONTEXT))
return;
+
+ event->attach_state &= ~PERF_ATTACH_CONTEXT;
+
ctx->nr_events--;
if (event->attr.inherit_stat)
ctx->nr_stat--;
- list_del_init(&event->group_entry);
list_del_rcu(&event->event_entry);
- if (event->group_leader != event)
- event->group_leader->nr_siblings--;
+ if (event->group_leader == event)
+ list_del_init(&event->group_entry);
update_group_times(event);
@@ -345,21 +362,39 @@
event->state = PERF_EVENT_STATE_OFF;
}
-static void
-perf_destroy_group(struct perf_event *event, struct perf_event_context *ctx)
+static void perf_group_detach(struct perf_event *event)
{
struct perf_event *sibling, *tmp;
+ struct list_head *list = NULL;
+
+ /*
+ * We can have double detach due to exit/hot-unplug + close.
+ */
+ if (!(event->attach_state & PERF_ATTACH_GROUP))
+ return;
+
+ event->attach_state &= ~PERF_ATTACH_GROUP;
+
+ /*
+ * If this is a sibling, remove it from its group.
+ */
+ if (event->group_leader != event) {
+ list_del_init(&event->group_entry);
+ event->group_leader->nr_siblings--;
+ return;
+ }
+
+ if (!list_empty(&event->group_entry))
+ list = &event->group_entry;
/*
* If this was a group event with sibling events then
* upgrade the siblings to singleton events by adding them
- * to the context list directly:
+ * to whatever list we are on.
*/
list_for_each_entry_safe(sibling, tmp, &event->sibling_list, group_entry) {
- struct list_head *list;
-
- list = ctx_group_list(event, ctx);
- list_move_tail(&sibling->group_entry, list);
+ if (list)
+ list_move_tail(&sibling->group_entry, list);
sibling->group_leader = sibling;
/* Inherit group flags from the previous leader */
@@ -652,8 +687,11 @@
if (txn)
pmu->start_txn(pmu);
- if (event_sched_in(group_event, cpuctx, ctx))
+ if (event_sched_in(group_event, cpuctx, ctx)) {
+ if (txn)
+ pmu->cancel_txn(pmu);
return -EAGAIN;
+ }
/*
* Schedule in siblings as one group (if any):
@@ -675,9 +713,6 @@
}
group_error:
- if (txn)
- pmu->cancel_txn(pmu);
-
/*
* Groups can be scheduled in as one unit only, so undo any
* partial group before returning:
@@ -689,6 +724,9 @@
}
event_sched_out(group_event, cpuctx, ctx);
+ if (txn)
+ pmu->cancel_txn(pmu);
+
return -EAGAIN;
}
@@ -727,6 +765,7 @@
struct perf_event_context *ctx)
{
list_add_event(event, ctx);
+ perf_group_attach(event);
event->tstamp_enabled = ctx->time;
event->tstamp_running = ctx->time;
event->tstamp_stopped = ctx->time;
@@ -1468,6 +1507,9 @@
divisor = nsec * frequency;
}
+ if (!divisor)
+ return dividend;
+
return div64_u64(dividend, divisor);
}
@@ -1490,7 +1532,7 @@
static void perf_adjust_period(struct perf_event *event, u64 nsec, u64 count)
{
struct hw_perf_event *hwc = &event->hw;
- u64 period, sample_period;
+ s64 period, sample_period;
s64 delta;
period = perf_calculate_period(event, nsec, count);
@@ -1841,6 +1883,7 @@
}
static void perf_pending_sync(struct perf_event *event);
+static void perf_mmap_data_put(struct perf_mmap_data *data);
static void free_event(struct perf_event *event)
{
@@ -1856,9 +1899,9 @@
atomic_dec(&nr_task_events);
}
- if (event->output) {
- fput(event->output->filp);
- event->output = NULL;
+ if (event->data) {
+ perf_mmap_data_put(event->data);
+ event->data = NULL;
}
if (event->destroy)
@@ -1893,8 +1936,8 @@
*/
mutex_lock_nested(&ctx->mutex, SINGLE_DEPTH_NESTING);
raw_spin_lock_irq(&ctx->lock);
+ perf_group_detach(event);
list_del_event(event, ctx);
- perf_destroy_group(event, ctx);
raw_spin_unlock_irq(&ctx->lock);
mutex_unlock(&ctx->mutex);
@@ -2175,7 +2218,27 @@
return ret;
}
-static int perf_event_set_output(struct perf_event *event, int output_fd);
+static const struct file_operations perf_fops;
+
+static struct perf_event *perf_fget_light(int fd, int *fput_needed)
+{
+ struct file *file;
+
+ file = fget_light(fd, fput_needed);
+ if (!file)
+ return ERR_PTR(-EBADF);
+
+ if (file->f_op != &perf_fops) {
+ fput_light(file, *fput_needed);
+ *fput_needed = 0;
+ return ERR_PTR(-EBADF);
+ }
+
+ return file->private_data;
+}
+
+static int perf_event_set_output(struct perf_event *event,
+ struct perf_event *output_event);
static int perf_event_set_filter(struct perf_event *event, void __user *arg);
static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
@@ -2202,7 +2265,23 @@
return perf_event_period(event, (u64 __user *)arg);
case PERF_EVENT_IOC_SET_OUTPUT:
- return perf_event_set_output(event, arg);
+ {
+ struct perf_event *output_event = NULL;
+ int fput_needed = 0;
+ int ret;
+
+ if (arg != -1) {
+ output_event = perf_fget_light(arg, &fput_needed);
+ if (IS_ERR(output_event))
+ return PTR_ERR(output_event);
+ }
+
+ ret = perf_event_set_output(event, output_event);
+ if (output_event)
+ fput_light(output_event->filp, fput_needed);
+
+ return ret;
+ }
case PERF_EVENT_IOC_SET_FILTER:
return perf_event_set_filter(event, (void __user *)arg);
@@ -2297,11 +2376,6 @@
rcu_read_unlock();
}
-static unsigned long perf_data_size(struct perf_mmap_data *data)
-{
- return data->nr_pages << (PAGE_SHIFT + data->data_order);
-}
-
#ifndef CONFIG_PERF_USE_VMALLOC
/*
@@ -2320,6 +2394,19 @@
return virt_to_page(data->data_pages[pgoff - 1]);
}
+static void *perf_mmap_alloc_page(int cpu)
+{
+ struct page *page;
+ int node;
+
+ node = (cpu == -1) ? cpu : cpu_to_node(cpu);
+ page = alloc_pages_node(node, GFP_KERNEL | __GFP_ZERO, 0);
+ if (!page)
+ return NULL;
+
+ return page_address(page);
+}
+
static struct perf_mmap_data *
perf_mmap_data_alloc(struct perf_event *event, int nr_pages)
{
@@ -2327,8 +2414,6 @@
unsigned long size;
int i;
- WARN_ON(atomic_read(&event->mmap_count));
-
size = sizeof(struct perf_mmap_data);
size += nr_pages * sizeof(void *);
@@ -2336,17 +2421,16 @@
if (!data)
goto fail;
- data->user_page = (void *)get_zeroed_page(GFP_KERNEL);
+ data->user_page = perf_mmap_alloc_page(event->cpu);
if (!data->user_page)
goto fail_user_page;
for (i = 0; i < nr_pages; i++) {
- data->data_pages[i] = (void *)get_zeroed_page(GFP_KERNEL);
+ data->data_pages[i] = perf_mmap_alloc_page(event->cpu);
if (!data->data_pages[i])
goto fail_data_pages;
}
- data->data_order = 0;
data->nr_pages = nr_pages;
return data;
@@ -2382,6 +2466,11 @@
kfree(data);
}
+static inline int page_order(struct perf_mmap_data *data)
+{
+ return 0;
+}
+
#else
/*
@@ -2390,10 +2479,15 @@
* Required for architectures that have d-cache aliasing issues.
*/
+static inline int page_order(struct perf_mmap_data *data)
+{
+ return data->page_order;
+}
+
static struct page *
perf_mmap_to_page(struct perf_mmap_data *data, unsigned long pgoff)
{
- if (pgoff > (1UL << data->data_order))
+ if (pgoff > (1UL << page_order(data)))
return NULL;
return vmalloc_to_page((void *)data->user_page + pgoff * PAGE_SIZE);
@@ -2413,7 +2507,7 @@
int i, nr;
data = container_of(work, struct perf_mmap_data, work);
- nr = 1 << data->data_order;
+ nr = 1 << page_order(data);
base = data->user_page;
for (i = 0; i < nr + 1; i++)
@@ -2435,8 +2529,6 @@
unsigned long size;
void *all_buf;
- WARN_ON(atomic_read(&event->mmap_count));
-
size = sizeof(struct perf_mmap_data);
size += sizeof(void *);
@@ -2452,7 +2544,7 @@
data->user_page = all_buf;
data->data_pages[0] = all_buf + PAGE_SIZE;
- data->data_order = ilog2(nr_pages);
+ data->page_order = ilog2(nr_pages);
data->nr_pages = 1;
return data;
@@ -2466,6 +2558,11 @@
#endif
+static unsigned long perf_data_size(struct perf_mmap_data *data)
+{
+ return data->nr_pages << (PAGE_SHIFT + page_order(data));
+}
+
static int perf_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
{
struct perf_event *event = vma->vm_file->private_data;
@@ -2506,8 +2603,6 @@
{
long max_size = perf_data_size(data);
- atomic_set(&data->lock, -1);
-
if (event->attr.watermark) {
data->watermark = min_t(long, max_size,
event->attr.wakeup_watermark);
@@ -2516,7 +2611,7 @@
if (!data->watermark)
data->watermark = max_size / 2;
-
+ atomic_set(&data->refcount, 1);
rcu_assign_pointer(event->data, data);
}
@@ -2528,13 +2623,26 @@
perf_mmap_data_free(data);
}
-static void perf_mmap_data_release(struct perf_event *event)
+static struct perf_mmap_data *perf_mmap_data_get(struct perf_event *event)
{
- struct perf_mmap_data *data = event->data;
+ struct perf_mmap_data *data;
- WARN_ON(atomic_read(&event->mmap_count));
+ rcu_read_lock();
+ data = rcu_dereference(event->data);
+ if (data) {
+ if (!atomic_inc_not_zero(&data->refcount))
+ data = NULL;
+ }
+ rcu_read_unlock();
- rcu_assign_pointer(event->data, NULL);
+ return data;
+}
+
+static void perf_mmap_data_put(struct perf_mmap_data *data)
+{
+ if (!atomic_dec_and_test(&data->refcount))
+ return;
+
call_rcu(&data->rcu_head, perf_mmap_data_free_rcu);
}
@@ -2549,15 +2657,18 @@
{
struct perf_event *event = vma->vm_file->private_data;
- WARN_ON_ONCE(event->ctx->parent_ctx);
if (atomic_dec_and_mutex_lock(&event->mmap_count, &event->mmap_mutex)) {
unsigned long size = perf_data_size(event->data);
- struct user_struct *user = current_user();
+ struct user_struct *user = event->mmap_user;
+ struct perf_mmap_data *data = event->data;
atomic_long_sub((size >> PAGE_SHIFT) + 1, &user->locked_vm);
- vma->vm_mm->locked_vm -= event->data->nr_locked;
- perf_mmap_data_release(event);
+ vma->vm_mm->locked_vm -= event->mmap_locked;
+ rcu_assign_pointer(event->data, NULL);
mutex_unlock(&event->mmap_mutex);
+
+ perf_mmap_data_put(data);
+ free_uid(user);
}
}
@@ -2580,6 +2691,14 @@
long user_extra, extra;
int ret = 0;
+ /*
+ * Don't allow mmap() of inherited per-task counters. This would
+ * create a performance issue due to all children writing to the
+ * same buffer.
+ */
+ if (event->cpu == -1 && event->attr.inherit)
+ return -EINVAL;
+
if (!(vma->vm_flags & VM_SHARED))
return -EINVAL;
@@ -2601,13 +2720,10 @@
WARN_ON_ONCE(event->ctx->parent_ctx);
mutex_lock(&event->mmap_mutex);
- if (event->output) {
- ret = -EINVAL;
- goto unlock;
- }
-
- if (atomic_inc_not_zero(&event->mmap_count)) {
- if (nr_pages != event->data->nr_pages)
+ if (event->data) {
+ if (event->data->nr_pages == nr_pages)
+ atomic_inc(&event->data->refcount);
+ else
ret = -EINVAL;
goto unlock;
}
@@ -2639,21 +2755,23 @@
WARN_ON(event->data);
data = perf_mmap_data_alloc(event, nr_pages);
- ret = -ENOMEM;
- if (!data)
+ if (!data) {
+ ret = -ENOMEM;
goto unlock;
+ }
- ret = 0;
perf_mmap_data_init(event, data);
-
- atomic_set(&event->mmap_count, 1);
- atomic_long_add(user_extra, &user->locked_vm);
- vma->vm_mm->locked_vm += extra;
- event->data->nr_locked = extra;
if (vma->vm_flags & VM_WRITE)
event->data->writable = 1;
+ atomic_long_add(user_extra, &user->locked_vm);
+ event->mmap_locked = extra;
+ event->mmap_user = get_current_user();
+ vma->vm_mm->locked_vm += event->mmap_locked;
+
unlock:
+ if (!ret)
+ atomic_inc(&event->mmap_count);
mutex_unlock(&event->mmap_mutex);
vma->vm_flags |= VM_RESERVED;
@@ -2885,127 +3003,87 @@
}
/*
- * Curious locking construct.
- *
* We need to ensure a later event_id doesn't publish a head when a former
- * event_id isn't done writing. However since we need to deal with NMIs we
+ * event isn't done writing. However since we need to deal with NMIs we
* cannot fully serialize things.
*
- * What we do is serialize between CPUs so we only have to deal with NMI
- * nesting on a single CPU.
- *
* We only publish the head (and generate a wakeup) when the outer-most
- * event_id completes.
+ * event completes.
*/
-static void perf_output_lock(struct perf_output_handle *handle)
+static void perf_output_get_handle(struct perf_output_handle *handle)
{
struct perf_mmap_data *data = handle->data;
- int cur, cpu = get_cpu();
- handle->locked = 0;
-
- for (;;) {
- cur = atomic_cmpxchg(&data->lock, -1, cpu);
- if (cur == -1) {
- handle->locked = 1;
- break;
- }
- if (cur == cpu)
- break;
-
- cpu_relax();
- }
+ preempt_disable();
+ local_inc(&data->nest);
+ handle->wakeup = local_read(&data->wakeup);
}
-static void perf_output_unlock(struct perf_output_handle *handle)
+static void perf_output_put_handle(struct perf_output_handle *handle)
{
struct perf_mmap_data *data = handle->data;
unsigned long head;
- int cpu;
-
- data->done_head = data->head;
-
- if (!handle->locked)
- goto out;
again:
- /*
- * The xchg implies a full barrier that ensures all writes are done
- * before we publish the new head, matched by a rmb() in userspace when
- * reading this position.
- */
- while ((head = atomic_long_xchg(&data->done_head, 0)))
- data->user_page->data_head = head;
+ head = local_read(&data->head);
/*
- * NMI can happen here, which means we can miss a done_head update.
+ * IRQ/NMI can happen here, which means we can miss a head update.
*/
- cpu = atomic_xchg(&data->lock, -1);
- WARN_ON_ONCE(cpu != smp_processor_id());
+ if (!local_dec_and_test(&data->nest))
+ goto out;
/*
- * Therefore we have to validate we did not indeed do so.
+ * Publish the known good head. Rely on the full barrier implied
+ * by atomic_dec_and_test() order the data->head read and this
+ * write.
*/
- if (unlikely(atomic_long_read(&data->done_head))) {
- /*
- * Since we had it locked, we can lock it again.
- */
- while (atomic_cmpxchg(&data->lock, -1, cpu) != -1)
- cpu_relax();
+ data->user_page->data_head = head;
+ /*
+ * Now check if we missed an update, rely on the (compiler)
+ * barrier in atomic_dec_and_test() to re-read data->head.
+ */
+ if (unlikely(head != local_read(&data->head))) {
+ local_inc(&data->nest);
goto again;
}
- if (atomic_xchg(&data->wakeup, 0))
+ if (handle->wakeup != local_read(&data->wakeup))
perf_output_wakeup(handle);
-out:
- put_cpu();
+
+ out:
+ preempt_enable();
}
-void perf_output_copy(struct perf_output_handle *handle,
+__always_inline void perf_output_copy(struct perf_output_handle *handle,
const void *buf, unsigned int len)
{
- unsigned int pages_mask;
- unsigned long offset;
- unsigned int size;
- void **pages;
-
- offset = handle->offset;
- pages_mask = handle->data->nr_pages - 1;
- pages = handle->data->data_pages;
-
do {
- unsigned long page_offset;
- unsigned long page_size;
- int nr;
+ unsigned long size = min_t(unsigned long, handle->size, len);
- nr = (offset >> PAGE_SHIFT) & pages_mask;
- page_size = 1UL << (handle->data->data_order + PAGE_SHIFT);
- page_offset = offset & (page_size - 1);
- size = min_t(unsigned int, page_size - page_offset, len);
+ memcpy(handle->addr, buf, size);
- memcpy(pages[nr] + page_offset, buf, size);
+ len -= size;
+ handle->addr += size;
+ buf += size;
+ handle->size -= size;
+ if (!handle->size) {
+ struct perf_mmap_data *data = handle->data;
- len -= size;
- buf += size;
- offset += size;
+ handle->page++;
+ handle->page &= data->nr_pages - 1;
+ handle->addr = data->data_pages[handle->page];
+ handle->size = PAGE_SIZE << page_order(data);
+ }
} while (len);
-
- handle->offset = offset;
-
- /*
- * Check we didn't copy past our reservation window, taking the
- * possible unsigned int wrap into account.
- */
- WARN_ON_ONCE(((long)(handle->head - handle->offset)) < 0);
}
int perf_output_begin(struct perf_output_handle *handle,
struct perf_event *event, unsigned int size,
int nmi, int sample)
{
- struct perf_event *output_event;
struct perf_mmap_data *data;
unsigned long tail, offset, head;
int have_lost;
@@ -3022,10 +3100,6 @@
if (event->parent)
event = event->parent;
- output_event = rcu_dereference(event->output);
- if (output_event)
- event = output_event;
-
data = rcu_dereference(event->data);
if (!data)
goto out;
@@ -3036,13 +3110,13 @@
handle->sample = sample;
if (!data->nr_pages)
- goto fail;
+ goto out;
- have_lost = atomic_read(&data->lost);
+ have_lost = local_read(&data->lost);
if (have_lost)
size += sizeof(lost_event);
- perf_output_lock(handle);
+ perf_output_get_handle(handle);
do {
/*
@@ -3052,24 +3126,28 @@
*/
tail = ACCESS_ONCE(data->user_page->data_tail);
smp_rmb();
- offset = head = atomic_long_read(&data->head);
+ offset = head = local_read(&data->head);
head += size;
if (unlikely(!perf_output_space(data, tail, offset, head)))
goto fail;
- } while (atomic_long_cmpxchg(&data->head, offset, head) != offset);
+ } while (local_cmpxchg(&data->head, offset, head) != offset);
- handle->offset = offset;
- handle->head = head;
+ if (head - local_read(&data->wakeup) > data->watermark)
+ local_add(data->watermark, &data->wakeup);
- if (head - tail > data->watermark)
- atomic_set(&data->wakeup, 1);
+ handle->page = offset >> (PAGE_SHIFT + page_order(data));
+ handle->page &= data->nr_pages - 1;
+ handle->size = offset & ((PAGE_SIZE << page_order(data)) - 1);
+ handle->addr = data->data_pages[handle->page];
+ handle->addr += handle->size;
+ handle->size = (PAGE_SIZE << page_order(data)) - handle->size;
if (have_lost) {
lost_event.header.type = PERF_RECORD_LOST;
lost_event.header.misc = 0;
lost_event.header.size = sizeof(lost_event);
lost_event.id = event->id;
- lost_event.lost = atomic_xchg(&data->lost, 0);
+ lost_event.lost = local_xchg(&data->lost, 0);
perf_output_put(handle, lost_event);
}
@@ -3077,8 +3155,8 @@
return 0;
fail:
- atomic_inc(&data->lost);
- perf_output_unlock(handle);
+ local_inc(&data->lost);
+ perf_output_put_handle(handle);
out:
rcu_read_unlock();
@@ -3093,14 +3171,14 @@
int wakeup_events = event->attr.wakeup_events;
if (handle->sample && wakeup_events) {
- int events = atomic_inc_return(&data->events);
+ int events = local_inc_return(&data->events);
if (events >= wakeup_events) {
- atomic_sub(wakeup_events, &data->events);
- atomic_set(&data->wakeup, 1);
+ local_sub(wakeup_events, &data->events);
+ local_inc(&data->wakeup);
}
}
- perf_output_unlock(handle);
+ perf_output_put_handle(handle);
rcu_read_unlock();
}
@@ -3436,22 +3514,13 @@
{
struct perf_output_handle handle;
struct task_struct *task = task_event->task;
- unsigned long flags;
int size, ret;
- /*
- * If this CPU attempts to acquire an rq lock held by a CPU spinning
- * in perf_output_lock() from interrupt context, it's game over.
- */
- local_irq_save(flags);
-
size = task_event->event_id.header.size;
ret = perf_output_begin(&handle, event, size, 0, 0);
- if (ret) {
- local_irq_restore(flags);
+ if (ret)
return;
- }
task_event->event_id.pid = perf_event_pid(event, task);
task_event->event_id.ppid = perf_event_pid(event, current);
@@ -3462,7 +3531,6 @@
perf_output_put(&handle, task_event->event_id);
perf_output_end(&handle);
- local_irq_restore(flags);
}
static int perf_event_task_match(struct perf_event *event)
@@ -3990,13 +4058,6 @@
}
}
-static void perf_swevent_unthrottle(struct perf_event *event)
-{
- /*
- * Nothing to do, we already reset hwc->interrupts.
- */
-}
-
static void perf_swevent_add(struct perf_event *event, u64 nr,
int nmi, struct perf_sample_data *data,
struct pt_regs *regs)
@@ -4020,9 +4081,6 @@
perf_swevent_overflow(event, 0, nmi, data, regs);
}
-static int perf_tp_event_match(struct perf_event *event,
- struct perf_sample_data *data);
-
static int perf_exclude_event(struct perf_event *event,
struct pt_regs *regs)
{
@@ -4052,10 +4110,6 @@
if (perf_exclude_event(event, regs))
return 0;
- if (event->attr.type == PERF_TYPE_TRACEPOINT &&
- !perf_tp_event_match(event, data))
- return 0;
-
return 1;
}
@@ -4066,19 +4120,46 @@
return hash_64(val, SWEVENT_HLIST_BITS);
}
-static struct hlist_head *
-find_swevent_head(struct perf_cpu_context *ctx, u64 type, u32 event_id)
+static inline struct hlist_head *
+__find_swevent_head(struct swevent_hlist *hlist, u64 type, u32 event_id)
{
- u64 hash;
- struct swevent_hlist *hlist;
+ u64 hash = swevent_hash(type, event_id);
- hash = swevent_hash(type, event_id);
+ return &hlist->heads[hash];
+}
+
+/* For the read side: events when they trigger */
+static inline struct hlist_head *
+find_swevent_head_rcu(struct perf_cpu_context *ctx, u64 type, u32 event_id)
+{
+ struct swevent_hlist *hlist;
hlist = rcu_dereference(ctx->swevent_hlist);
if (!hlist)
return NULL;
- return &hlist->heads[hash];
+ return __find_swevent_head(hlist, type, event_id);
+}
+
+/* For the event head insertion and removal in the hlist */
+static inline struct hlist_head *
+find_swevent_head(struct perf_cpu_context *ctx, struct perf_event *event)
+{
+ struct swevent_hlist *hlist;
+ u32 event_id = event->attr.config;
+ u64 type = event->attr.type;
+
+ /*
+ * Event scheduling is always serialized against hlist allocation
+ * and release. Which makes the protected version suitable here.
+ * The context lock guarantees that.
+ */
+ hlist = rcu_dereference_protected(ctx->swevent_hlist,
+ lockdep_is_held(&event->ctx->lock));
+ if (!hlist)
+ return NULL;
+
+ return __find_swevent_head(hlist, type, event_id);
}
static void do_perf_sw_event(enum perf_type_id type, u32 event_id,
@@ -4095,7 +4176,7 @@
rcu_read_lock();
- head = find_swevent_head(cpuctx, type, event_id);
+ head = find_swevent_head_rcu(cpuctx, type, event_id);
if (!head)
goto end;
@@ -4110,7 +4191,7 @@
int perf_swevent_get_recursion_context(void)
{
- struct perf_cpu_context *cpuctx = &get_cpu_var(perf_cpu_context);
+ struct perf_cpu_context *cpuctx = &__get_cpu_var(perf_cpu_context);
int rctx;
if (in_nmi())
@@ -4122,10 +4203,8 @@
else
rctx = 0;
- if (cpuctx->recursion[rctx]) {
- put_cpu_var(perf_cpu_context);
+ if (cpuctx->recursion[rctx])
return -1;
- }
cpuctx->recursion[rctx]++;
barrier();
@@ -4139,7 +4218,6 @@
struct perf_cpu_context *cpuctx = &__get_cpu_var(perf_cpu_context);
barrier();
cpuctx->recursion[rctx]--;
- put_cpu_var(perf_cpu_context);
}
EXPORT_SYMBOL_GPL(perf_swevent_put_recursion_context);
@@ -4150,6 +4228,7 @@
struct perf_sample_data data;
int rctx;
+ preempt_disable_notrace();
rctx = perf_swevent_get_recursion_context();
if (rctx < 0)
return;
@@ -4159,6 +4238,7 @@
do_perf_sw_event(PERF_TYPE_SOFTWARE, event_id, nr, nmi, &data, regs);
perf_swevent_put_recursion_context(rctx);
+ preempt_enable_notrace();
}
static void perf_swevent_read(struct perf_event *event)
@@ -4178,7 +4258,7 @@
perf_swevent_set_period(event);
}
- head = find_swevent_head(cpuctx, event->attr.type, event->attr.config);
+ head = find_swevent_head(cpuctx, event);
if (WARN_ON_ONCE(!head))
return -EINVAL;
@@ -4192,11 +4272,22 @@
hlist_del_rcu(&event->hlist_entry);
}
+static void perf_swevent_void(struct perf_event *event)
+{
+}
+
+static int perf_swevent_int(struct perf_event *event)
+{
+ return 0;
+}
+
static const struct pmu perf_ops_generic = {
.enable = perf_swevent_enable,
.disable = perf_swevent_disable,
+ .start = perf_swevent_int,
+ .stop = perf_swevent_void,
.read = perf_swevent_read,
- .unthrottle = perf_swevent_unthrottle,
+ .unthrottle = perf_swevent_void, /* hwc->interrupts already reset */
};
/*
@@ -4366,6 +4457,14 @@
.read = task_clock_perf_event_read,
};
+/* Deref the hlist from the update side */
+static inline struct swevent_hlist *
+swevent_hlist_deref(struct perf_cpu_context *cpuctx)
+{
+ return rcu_dereference_protected(cpuctx->swevent_hlist,
+ lockdep_is_held(&cpuctx->hlist_mutex));
+}
+
static void swevent_hlist_release_rcu(struct rcu_head *rcu_head)
{
struct swevent_hlist *hlist;
@@ -4376,12 +4475,11 @@
static void swevent_hlist_release(struct perf_cpu_context *cpuctx)
{
- struct swevent_hlist *hlist;
+ struct swevent_hlist *hlist = swevent_hlist_deref(cpuctx);
- if (!cpuctx->swevent_hlist)
+ if (!hlist)
return;
- hlist = cpuctx->swevent_hlist;
rcu_assign_pointer(cpuctx->swevent_hlist, NULL);
call_rcu(&hlist->rcu_head, swevent_hlist_release_rcu);
}
@@ -4418,7 +4516,7 @@
mutex_lock(&cpuctx->hlist_mutex);
- if (!cpuctx->swevent_hlist && cpu_online(cpu)) {
+ if (!swevent_hlist_deref(cpuctx) && cpu_online(cpu)) {
struct swevent_hlist *hlist;
hlist = kzalloc(sizeof(*hlist), GFP_KERNEL);
@@ -4467,25 +4565,16 @@
#ifdef CONFIG_EVENT_TRACING
-void perf_tp_event(int event_id, u64 addr, u64 count, void *record,
- int entry_size, struct pt_regs *regs)
-{
- struct perf_sample_data data;
- struct perf_raw_record raw = {
- .size = entry_size,
- .data = record,
- };
+static const struct pmu perf_ops_tracepoint = {
+ .enable = perf_trace_enable,
+ .disable = perf_trace_disable,
+ .start = perf_swevent_int,
+ .stop = perf_swevent_void,
+ .read = perf_swevent_read,
+ .unthrottle = perf_swevent_void,
+};
- perf_sample_data_init(&data, addr);
- data.raw = &raw;
-
- /* Trace events already protected against recursion */
- do_perf_sw_event(PERF_TYPE_TRACEPOINT, event_id, count, 1,
- &data, regs);
-}
-EXPORT_SYMBOL_GPL(perf_tp_event);
-
-static int perf_tp_event_match(struct perf_event *event,
+static int perf_tp_filter_match(struct perf_event *event,
struct perf_sample_data *data)
{
void *record = data->raw->data;
@@ -4495,10 +4584,49 @@
return 0;
}
+static int perf_tp_event_match(struct perf_event *event,
+ struct perf_sample_data *data,
+ struct pt_regs *regs)
+{
+ /*
+ * All tracepoints are from kernel-space.
+ */
+ if (event->attr.exclude_kernel)
+ return 0;
+
+ if (!perf_tp_filter_match(event, data))
+ return 0;
+
+ return 1;
+}
+
+void perf_tp_event(u64 addr, u64 count, void *record, int entry_size,
+ struct pt_regs *regs, struct hlist_head *head)
+{
+ struct perf_sample_data data;
+ struct perf_event *event;
+ struct hlist_node *node;
+
+ struct perf_raw_record raw = {
+ .size = entry_size,
+ .data = record,
+ };
+
+ perf_sample_data_init(&data, addr);
+ data.raw = &raw;
+
+ rcu_read_lock();
+ hlist_for_each_entry_rcu(event, node, head, hlist_entry) {
+ if (perf_tp_event_match(event, &data, regs))
+ perf_swevent_add(event, count, 1, &data, regs);
+ }
+ rcu_read_unlock();
+}
+EXPORT_SYMBOL_GPL(perf_tp_event);
+
static void tp_perf_event_destroy(struct perf_event *event)
{
- perf_trace_disable(event->attr.config);
- swevent_hlist_put(event);
+ perf_trace_destroy(event);
}
static const struct pmu *tp_perf_event_init(struct perf_event *event)
@@ -4514,17 +4642,13 @@
!capable(CAP_SYS_ADMIN))
return ERR_PTR(-EPERM);
- if (perf_trace_enable(event->attr.config))
+ err = perf_trace_init(event);
+ if (err)
return NULL;
event->destroy = tp_perf_event_destroy;
- err = swevent_hlist_get(event);
- if (err) {
- perf_trace_disable(event->attr.config);
- return ERR_PTR(err);
- }
- return &perf_ops_generic;
+ return &perf_ops_tracepoint;
}
static int perf_event_set_filter(struct perf_event *event, void __user *arg)
@@ -4552,12 +4676,6 @@
#else
-static int perf_tp_event_match(struct perf_event *event,
- struct perf_sample_data *data)
-{
- return 1;
-}
-
static const struct pmu *tp_perf_event_init(struct perf_event *event)
{
return NULL;
@@ -4886,54 +5004,53 @@
goto out;
}
-static int perf_event_set_output(struct perf_event *event, int output_fd)
+static int
+perf_event_set_output(struct perf_event *event, struct perf_event *output_event)
{
- struct perf_event *output_event = NULL;
- struct file *output_file = NULL;
- struct perf_event *old_output;
- int fput_needed = 0;
+ struct perf_mmap_data *data = NULL, *old_data = NULL;
int ret = -EINVAL;
- if (!output_fd)
+ if (!output_event)
goto set;
- output_file = fget_light(output_fd, &fput_needed);
- if (!output_file)
- return -EBADF;
-
- if (output_file->f_op != &perf_fops)
+ /* don't allow circular references */
+ if (event == output_event)
goto out;
- output_event = output_file->private_data;
-
- /* Don't chain output fds */
- if (output_event->output)
+ /*
+ * Don't allow cross-cpu buffers
+ */
+ if (output_event->cpu != event->cpu)
goto out;
- /* Don't set an output fd when we already have an output channel */
- if (event->data)
+ /*
+ * If its not a per-cpu buffer, it must be the same task.
+ */
+ if (output_event->cpu == -1 && output_event->ctx != event->ctx)
goto out;
- atomic_long_inc(&output_file->f_count);
-
set:
mutex_lock(&event->mmap_mutex);
- old_output = event->output;
- rcu_assign_pointer(event->output, output_event);
- mutex_unlock(&event->mmap_mutex);
+ /* Can't redirect output if we've got an active mmap() */
+ if (atomic_read(&event->mmap_count))
+ goto unlock;
- if (old_output) {
- /*
- * we need to make sure no existing perf_output_*()
- * is still referencing this event.
- */
- synchronize_rcu();
- fput(old_output->filp);
+ if (output_event) {
+ /* get the buffer we want to redirect to */
+ data = perf_mmap_data_get(output_event);
+ if (!data)
+ goto unlock;
}
+ old_data = event->data;
+ rcu_assign_pointer(event->data, data);
ret = 0;
+unlock:
+ mutex_unlock(&event->mmap_mutex);
+
+ if (old_data)
+ perf_mmap_data_put(old_data);
out:
- fput_light(output_file, fput_needed);
return ret;
}
@@ -4949,13 +5066,13 @@
struct perf_event_attr __user *, attr_uptr,
pid_t, pid, int, cpu, int, group_fd, unsigned long, flags)
{
- struct perf_event *event, *group_leader;
+ struct perf_event *event, *group_leader = NULL, *output_event = NULL;
struct perf_event_attr attr;
struct perf_event_context *ctx;
struct file *event_file = NULL;
struct file *group_file = NULL;
+ int event_fd;
int fput_needed = 0;
- int fput_needed2 = 0;
int err;
/* for future expandability... */
@@ -4976,26 +5093,38 @@
return -EINVAL;
}
+ event_fd = get_unused_fd_flags(O_RDWR);
+ if (event_fd < 0)
+ return event_fd;
+
/*
* Get the target context (task or percpu):
*/
ctx = find_get_context(pid, cpu);
- if (IS_ERR(ctx))
- return PTR_ERR(ctx);
+ if (IS_ERR(ctx)) {
+ err = PTR_ERR(ctx);
+ goto err_fd;
+ }
+
+ if (group_fd != -1) {
+ group_leader = perf_fget_light(group_fd, &fput_needed);
+ if (IS_ERR(group_leader)) {
+ err = PTR_ERR(group_leader);
+ goto err_put_context;
+ }
+ group_file = group_leader->filp;
+ if (flags & PERF_FLAG_FD_OUTPUT)
+ output_event = group_leader;
+ if (flags & PERF_FLAG_FD_NO_GROUP)
+ group_leader = NULL;
+ }
/*
* Look up the group leader (we will attach this event to it):
*/
- group_leader = NULL;
- if (group_fd != -1 && !(flags & PERF_FLAG_FD_NO_GROUP)) {
+ if (group_leader) {
err = -EINVAL;
- group_file = fget_light(group_fd, &fput_needed);
- if (!group_file)
- goto err_put_context;
- if (group_file->f_op != &perf_fops)
- goto err_put_context;
- group_leader = group_file->private_data;
/*
* Do not allow a recursive hierarchy (this new sibling
* becoming part of another group-sibling):
@@ -5017,22 +5146,21 @@
event = perf_event_alloc(&attr, cpu, ctx, group_leader,
NULL, NULL, GFP_KERNEL);
- err = PTR_ERR(event);
- if (IS_ERR(event))
+ if (IS_ERR(event)) {
+ err = PTR_ERR(event);
goto err_put_context;
+ }
- err = anon_inode_getfd("[perf_event]", &perf_fops, event, O_RDWR);
- if (err < 0)
- goto err_free_put_context;
-
- event_file = fget_light(err, &fput_needed2);
- if (!event_file)
- goto err_free_put_context;
-
- if (flags & PERF_FLAG_FD_OUTPUT) {
- err = perf_event_set_output(event, group_fd);
+ if (output_event) {
+ err = perf_event_set_output(event, output_event);
if (err)
- goto err_fput_free_put_context;
+ goto err_free_put_context;
+ }
+
+ event_file = anon_inode_getfile("[perf_event]", &perf_fops, event, O_RDWR);
+ if (IS_ERR(event_file)) {
+ err = PTR_ERR(event_file);
+ goto err_free_put_context;
}
event->filp = event_file;
@@ -5048,19 +5176,23 @@
list_add_tail(&event->owner_entry, ¤t->perf_event_list);
mutex_unlock(¤t->perf_event_mutex);
-err_fput_free_put_context:
- fput_light(event_file, fput_needed2);
+ /*
+ * Drop the reference on the group_event after placing the
+ * new event on the sibling_list. This ensures destruction
+ * of the group leader will find the pointer to itself in
+ * perf_group_detach().
+ */
+ fput_light(group_file, fput_needed);
+ fd_install(event_fd, event_file);
+ return event_fd;
err_free_put_context:
- if (err < 0)
- free_event(event);
-
+ free_event(event);
err_put_context:
- if (err < 0)
- put_ctx(ctx);
-
fput_light(group_file, fput_needed);
-
+ put_ctx(ctx);
+err_fd:
+ put_unused_fd(event_fd);
return err;
}
@@ -5371,6 +5503,7 @@
fput(parent->filp);
+ perf_group_detach(event);
list_del_event(event, ctx);
free_event(event);
}
diff --git a/kernel/pid.c b/kernel/pid.c
index aebb30d..e9fd8c1 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -513,6 +513,13 @@
void __init pidmap_init(void)
{
+ /* bump default and minimum pid_max based on number of cpus */
+ pid_max = min(pid_max_max, max_t(int, pid_max,
+ PIDS_PER_CPU_DEFAULT * num_possible_cpus()));
+ pid_max_min = max_t(int, pid_max_min,
+ PIDS_PER_CPU_MIN * num_possible_cpus());
+ pr_info("pid_max: default: %u minimum: %u\n", pid_max, pid_max_min);
+
init_pid_ns.pidmap[0].page = kzalloc(PAGE_SIZE, GFP_KERNEL);
/* Reserve PID 0. We never call free_pidmap(0) */
set_bit(0, init_pid_ns.pidmap[0].page);
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index 00bb252..9829646 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -363,7 +363,7 @@
}
} else {
read_lock(&tasklist_lock);
- if (thread_group_leader(p) && p->signal) {
+ if (thread_group_leader(p) && p->sighand) {
error =
cpu_clock_sample_group(which_clock,
p, &rtn);
@@ -439,7 +439,7 @@
if (likely(p != NULL)) {
read_lock(&tasklist_lock);
- if (unlikely(p->signal == NULL)) {
+ if (unlikely(p->sighand == NULL)) {
/*
* We raced with the reaping of the task.
* The deletion should have cleared us off the list.
@@ -691,10 +691,10 @@
read_lock(&tasklist_lock);
/*
* We need the tasklist_lock to protect against reaping that
- * clears p->signal. If p has just been reaped, we can no
+ * clears p->sighand. If p has just been reaped, we can no
* longer get any information about it at all.
*/
- if (unlikely(p->signal == NULL)) {
+ if (unlikely(p->sighand == NULL)) {
read_unlock(&tasklist_lock);
put_task_struct(p);
timer->it.cpu.task = NULL;
@@ -863,7 +863,7 @@
clear_dead = p->exit_state;
} else {
read_lock(&tasklist_lock);
- if (unlikely(p->signal == NULL)) {
+ if (unlikely(p->sighand == NULL)) {
/*
* The process has been reaped.
* We can't even collect a sample any more.
@@ -1199,7 +1199,7 @@
spin_lock(&p->sighand->siglock);
} else {
read_lock(&tasklist_lock);
- if (unlikely(p->signal == NULL)) {
+ if (unlikely(p->sighand == NULL)) {
/*
* The process has been reaped.
* We can't even collect a sample any more.
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 00d1fda..ad72342 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -559,14 +559,7 @@
new_timer->it_id = (timer_t) new_timer_id;
new_timer->it_clock = which_clock;
new_timer->it_overrun = -1;
- error = CLOCK_DISPATCH(which_clock, timer_create, (new_timer));
- if (error)
- goto out;
- /*
- * return the timer_id now. The next step is hard to
- * back out if there is an error.
- */
if (copy_to_user(created_timer_id,
&new_timer_id, sizeof (new_timer_id))) {
error = -EFAULT;
@@ -597,6 +590,10 @@
new_timer->sigq->info.si_tid = new_timer->it_id;
new_timer->sigq->info.si_code = SI_TIMER;
+ error = CLOCK_DISPATCH(which_clock, timer_create, (new_timer));
+ if (error)
+ goto out;
+
spin_lock_irq(¤t->sighand->siglock);
new_timer->it_signal = current->signal;
list_add(&new_timer->list, ¤t->signal->posix_timers);
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 5c36ea9..ca6066a 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -99,9 +99,13 @@
depends on PM_ADVANCED_DEBUG
default n
+config SUSPEND_NVS
+ bool
+
config SUSPEND
bool "Suspend to RAM and standby"
depends on PM && ARCH_SUSPEND_POSSIBLE
+ select SUSPEND_NVS if HAS_IOMEM
default y
---help---
Allow the system to enter sleep states in which main memory is
@@ -130,13 +134,10 @@
Turning OFF this setting is NOT recommended! If in doubt, say Y.
-config HIBERNATION_NVS
- bool
-
config HIBERNATION
bool "Hibernation (aka 'suspend to disk')"
depends on PM && SWAP && ARCH_HIBERNATION_POSSIBLE
- select HIBERNATION_NVS if HAS_IOMEM
+ select SUSPEND_NVS if HAS_IOMEM
---help---
Enable the suspend to disk (STD) functionality, which is usually
called "hibernation" in user interfaces. STD checkpoints the
diff --git a/kernel/power/Makefile b/kernel/power/Makefile
index 524e058..f9063c6 100644
--- a/kernel/power/Makefile
+++ b/kernel/power/Makefile
@@ -10,6 +10,6 @@
obj-$(CONFIG_PM_TEST_SUSPEND) += suspend_test.o
obj-$(CONFIG_HIBERNATION) += hibernate.o snapshot.o swap.o user.o \
block_io.o
-obj-$(CONFIG_HIBERNATION_NVS) += hibernate_nvs.o
+obj-$(CONFIG_SUSPEND_NVS) += nvs.o
obj-$(CONFIG_MAGIC_SYSRQ) += poweroff.o
diff --git a/kernel/power/hibernate_nvs.c b/kernel/power/nvs.c
similarity index 80%
rename from kernel/power/hibernate_nvs.c
rename to kernel/power/nvs.c
index fdcad9e..1836db6 100644
--- a/kernel/power/hibernate_nvs.c
+++ b/kernel/power/nvs.c
@@ -15,7 +15,7 @@
/*
* Platforms, like ACPI, may want us to save some memory used by them during
- * hibernation and to restore the contents of this memory during the subsequent
+ * suspend and to restore the contents of this memory during the subsequent
* resume. The code below implements a mechanism allowing us to do that.
*/
@@ -30,7 +30,7 @@
static LIST_HEAD(nvs_list);
/**
- * hibernate_nvs_register - register platform NVS memory region to save
+ * suspend_nvs_register - register platform NVS memory region to save
* @start - physical address of the region
* @size - size of the region
*
@@ -38,7 +38,7 @@
* things so that the data from page-aligned addresses in this region will
* be copied into separate RAM pages.
*/
-int hibernate_nvs_register(unsigned long start, unsigned long size)
+int suspend_nvs_register(unsigned long start, unsigned long size)
{
struct nvs_page *entry, *next;
@@ -68,9 +68,9 @@
}
/**
- * hibernate_nvs_free - free data pages allocated for saving NVS regions
+ * suspend_nvs_free - free data pages allocated for saving NVS regions
*/
-void hibernate_nvs_free(void)
+void suspend_nvs_free(void)
{
struct nvs_page *entry;
@@ -86,16 +86,16 @@
}
/**
- * hibernate_nvs_alloc - allocate memory necessary for saving NVS regions
+ * suspend_nvs_alloc - allocate memory necessary for saving NVS regions
*/
-int hibernate_nvs_alloc(void)
+int suspend_nvs_alloc(void)
{
struct nvs_page *entry;
list_for_each_entry(entry, &nvs_list, node) {
entry->data = (void *)__get_free_page(GFP_KERNEL);
if (!entry->data) {
- hibernate_nvs_free();
+ suspend_nvs_free();
return -ENOMEM;
}
}
@@ -103,9 +103,9 @@
}
/**
- * hibernate_nvs_save - save NVS memory regions
+ * suspend_nvs_save - save NVS memory regions
*/
-void hibernate_nvs_save(void)
+void suspend_nvs_save(void)
{
struct nvs_page *entry;
@@ -119,12 +119,12 @@
}
/**
- * hibernate_nvs_restore - restore NVS memory regions
+ * suspend_nvs_restore - restore NVS memory regions
*
* This function is going to be called with interrupts disabled, so it
* cannot iounmap the virtual addresses used to access the NVS region.
*/
-void hibernate_nvs_restore(void)
+void suspend_nvs_restore(void)
{
struct nvs_page *entry;
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index 56e7dbb..f37cb7d 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -16,6 +16,12 @@
#include <linux/cpu.h>
#include <linux/syscalls.h>
#include <linux/gfp.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
#include "power.h"
diff --git a/kernel/profile.c b/kernel/profile.c
index dfadc5b..b22a899 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -365,14 +365,14 @@
switch (action) {
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
- node = cpu_to_node(cpu);
+ node = cpu_to_mem(cpu);
per_cpu(cpu_profile_flip, cpu) = 0;
if (!per_cpu(cpu_profile_hits, cpu)[1]) {
page = alloc_pages_exact_node(node,
GFP_KERNEL | __GFP_ZERO,
0);
if (!page)
- return NOTIFY_BAD;
+ return notifier_from_errno(-ENOMEM);
per_cpu(cpu_profile_hits, cpu)[1] = page_address(page);
}
if (!per_cpu(cpu_profile_hits, cpu)[0]) {
@@ -388,7 +388,7 @@
page = virt_to_page(per_cpu(cpu_profile_hits, cpu)[1]);
per_cpu(cpu_profile_hits, cpu)[1] = NULL;
__free_page(page);
- return NOTIFY_BAD;
+ return notifier_from_errno(-ENOMEM);
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
if (prof_cpu_mask != NULL)
@@ -567,7 +567,7 @@
int cpu;
for_each_online_cpu(cpu) {
- int node = cpu_to_node(cpu);
+ int node = cpu_to_mem(cpu);
struct page *page;
page = alloc_pages_exact_node(node,
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 6af9cdd..74a3d69 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -594,6 +594,32 @@
ret = ptrace_detach(child, data);
break;
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+ case PTRACE_GETFDPIC: {
+ struct mm_struct *mm = get_task_mm(child);
+ unsigned long tmp = 0;
+
+ ret = -ESRCH;
+ if (!mm)
+ break;
+
+ switch (addr) {
+ case PTRACE_GETFDPIC_EXEC:
+ tmp = mm->context.exec_fdpic_loadmap;
+ break;
+ case PTRACE_GETFDPIC_INTERP:
+ tmp = mm->context.interp_fdpic_loadmap;
+ break;
+ default:
+ break;
+ }
+ mmput(mm);
+
+ ret = put_user(tmp, (unsigned long __user *) data);
+ break;
+ }
+#endif
+
#ifdef PTRACE_SINGLESTEP
case PTRACE_SINGLESTEP:
#endif
diff --git a/kernel/relay.c b/kernel/relay.c
index 4268287..c7cf397 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -539,7 +539,7 @@
"relay_hotcpu_callback: cpu %d buffer "
"creation failed\n", hotcpu);
mutex_unlock(&relay_channels_mutex);
- return NOTIFY_BAD;
+ return notifier_from_errno(-ENOMEM);
}
}
mutex_unlock(&relay_channels_mutex);
diff --git a/kernel/sched.c b/kernel/sched.c
index 054a601..f52a880 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -306,52 +306,6 @@
*/
struct task_group init_task_group;
-/* return group to which a task belongs */
-static inline struct task_group *task_group(struct task_struct *p)
-{
- struct task_group *tg;
-
-#ifdef CONFIG_CGROUP_SCHED
- tg = container_of(task_subsys_state(p, cpu_cgroup_subsys_id),
- struct task_group, css);
-#else
- tg = &init_task_group;
-#endif
- return tg;
-}
-
-/* Change a task's cfs_rq and parent entity if it moves across CPUs/groups */
-static inline void set_task_rq(struct task_struct *p, unsigned int cpu)
-{
- /*
- * Strictly speaking this rcu_read_lock() is not needed since the
- * task_group is tied to the cgroup, which in turn can never go away
- * as long as there are tasks attached to it.
- *
- * However since task_group() uses task_subsys_state() which is an
- * rcu_dereference() user, this quiets CONFIG_PROVE_RCU.
- */
- rcu_read_lock();
-#ifdef CONFIG_FAIR_GROUP_SCHED
- p->se.cfs_rq = task_group(p)->cfs_rq[cpu];
- p->se.parent = task_group(p)->se[cpu];
-#endif
-
-#ifdef CONFIG_RT_GROUP_SCHED
- p->rt.rt_rq = task_group(p)->rt_rq[cpu];
- p->rt.parent = task_group(p)->rt_se[cpu];
-#endif
- rcu_read_unlock();
-}
-
-#else
-
-static inline void set_task_rq(struct task_struct *p, unsigned int cpu) { }
-static inline struct task_group *task_group(struct task_struct *p)
-{
- return NULL;
-}
-
#endif /* CONFIG_CGROUP_SCHED */
/* CFS-related fields in a runqueue */
@@ -544,6 +498,8 @@
struct root_domain *rd;
struct sched_domain *sd;
+ unsigned long cpu_power;
+
unsigned char idle_at_tick;
/* For active balancing */
int post_schedule;
@@ -642,6 +598,49 @@
#define cpu_curr(cpu) (cpu_rq(cpu)->curr)
#define raw_rq() (&__raw_get_cpu_var(runqueues))
+#ifdef CONFIG_CGROUP_SCHED
+
+/*
+ * Return the group to which this tasks belongs.
+ *
+ * We use task_subsys_state_check() and extend the RCU verification
+ * with lockdep_is_held(&task_rq(p)->lock) because cpu_cgroup_attach()
+ * holds that lock for each task it moves into the cgroup. Therefore
+ * by holding that lock, we pin the task to the current cgroup.
+ */
+static inline struct task_group *task_group(struct task_struct *p)
+{
+ struct cgroup_subsys_state *css;
+
+ css = task_subsys_state_check(p, cpu_cgroup_subsys_id,
+ lockdep_is_held(&task_rq(p)->lock));
+ return container_of(css, struct task_group, css);
+}
+
+/* Change a task's cfs_rq and parent entity if it moves across CPUs/groups */
+static inline void set_task_rq(struct task_struct *p, unsigned int cpu)
+{
+#ifdef CONFIG_FAIR_GROUP_SCHED
+ p->se.cfs_rq = task_group(p)->cfs_rq[cpu];
+ p->se.parent = task_group(p)->se[cpu];
+#endif
+
+#ifdef CONFIG_RT_GROUP_SCHED
+ p->rt.rt_rq = task_group(p)->rt_rq[cpu];
+ p->rt.parent = task_group(p)->rt_se[cpu];
+#endif
+}
+
+#else /* CONFIG_CGROUP_SCHED */
+
+static inline void set_task_rq(struct task_struct *p, unsigned int cpu) { }
+static inline struct task_group *task_group(struct task_struct *p)
+{
+ return NULL;
+}
+
+#endif /* CONFIG_CGROUP_SCHED */
+
inline void update_rq_clock(struct rq *rq)
{
if (!rq->skip_clock_update)
@@ -969,14 +968,6 @@
}
}
-void task_rq_unlock_wait(struct task_struct *p)
-{
- struct rq *rq = task_rq(p);
-
- smp_mb(); /* spin-unlock-wait is not a full memory barrier */
- raw_spin_unlock_wait(&rq->lock);
-}
-
static void __task_rq_unlock(struct rq *rq)
__releases(rq->lock)
{
@@ -1263,6 +1254,12 @@
s64 period = sched_avg_period();
while ((s64)(rq->clock - rq->age_stamp) > period) {
+ /*
+ * Inline assembly required to prevent the compiler
+ * optimising this loop into a divmod call.
+ * See __iter_div_u64_rem() for another example of this.
+ */
+ asm("" : "+rm" (rq->age_stamp));
rq->age_stamp += period;
rq->rt_avg /= 2;
}
@@ -1507,24 +1504,9 @@
return max(rq->cpu_load[type-1], total);
}
-static struct sched_group *group_of(int cpu)
-{
- struct sched_domain *sd = rcu_dereference_sched(cpu_rq(cpu)->sd);
-
- if (!sd)
- return NULL;
-
- return sd->groups;
-}
-
static unsigned long power_of(int cpu)
{
- struct sched_group *group = group_of(cpu);
-
- if (!group)
- return SCHED_LOAD_SCALE;
-
- return group->cpu_power;
+ return cpu_rq(cpu)->cpu_power;
}
static int task_hot(struct task_struct *p, u64 now, struct sched_domain *sd);
@@ -1681,9 +1663,6 @@
static void update_h_load(long cpu)
{
- if (root_task_group_empty())
- return;
-
walk_tg_tree(tg_load_down, tg_nop, (void *)cpu);
}
@@ -1862,8 +1841,8 @@
static void set_load_weight(struct task_struct *p)
{
if (task_has_rt_policy(p)) {
- p->se.load.weight = prio_to_weight[0] * 2;
- p->se.load.inv_weight = prio_to_wmult[0] >> 1;
+ p->se.load.weight = 0;
+ p->se.load.inv_weight = WMULT_CONST;
return;
}
@@ -2515,7 +2494,16 @@
if (p->sched_class->task_fork)
p->sched_class->task_fork(p);
+ /*
+ * The child is not yet in the pid-hash so no cgroup attach races,
+ * and the cgroup is pinned to this child due to cgroup_fork()
+ * is ran before sched_fork().
+ *
+ * Silence PROVE_RCU.
+ */
+ rcu_read_lock();
set_task_cpu(p, cpu);
+ rcu_read_unlock();
#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
if (likely(sched_info_on()))
@@ -2885,9 +2873,9 @@
return sum;
}
-unsigned long nr_iowait_cpu(void)
+unsigned long nr_iowait_cpu(int cpu)
{
- struct rq *this = this_rq();
+ struct rq *this = cpu_rq(cpu);
return atomic_read(&this->nr_iowait);
}
@@ -4062,6 +4050,23 @@
EXPORT_SYMBOL(wait_for_completion_killable);
/**
+ * wait_for_completion_killable_timeout: - waits for completion of a task (w/(to,killable))
+ * @x: holds the state of this particular completion
+ * @timeout: timeout value in jiffies
+ *
+ * This waits for either a completion of a specific task to be
+ * signaled or for a specified timeout to expire. It can be
+ * interrupted by a kill signal. The timeout is in jiffies.
+ */
+unsigned long __sched
+wait_for_completion_killable_timeout(struct completion *x,
+ unsigned long timeout)
+{
+ return wait_for_common(x, timeout, TASK_KILLABLE);
+}
+EXPORT_SYMBOL(wait_for_completion_killable_timeout);
+
+/**
* try_wait_for_completion - try to decrement a completion without blocking
* @x: completion structure
*
@@ -4469,16 +4474,6 @@
}
if (user) {
-#ifdef CONFIG_RT_GROUP_SCHED
- /*
- * Do not allow realtime tasks into groups that have no runtime
- * assigned.
- */
- if (rt_bandwidth_enabled() && rt_policy(policy) &&
- task_group(p)->rt_bandwidth.rt_runtime == 0)
- return -EPERM;
-#endif
-
retval = security_task_setscheduler(p, policy, param);
if (retval)
return retval;
@@ -4494,6 +4489,22 @@
* runqueue lock must be held.
*/
rq = __task_rq_lock(p);
+
+#ifdef CONFIG_RT_GROUP_SCHED
+ if (user) {
+ /*
+ * Do not allow realtime tasks into groups that have no runtime
+ * assigned.
+ */
+ if (rt_bandwidth_enabled() && rt_policy(policy) &&
+ task_group(p)->rt_bandwidth.rt_runtime == 0) {
+ __task_rq_unlock(rq);
+ raw_spin_unlock_irqrestore(&p->pi_lock, flags);
+ return -EPERM;
+ }
+ }
+#endif
+
/* recheck policy now with rq lock held */
if (unlikely(oldpolicy != -1 && oldpolicy != p->policy)) {
policy = oldpolicy = -1;
@@ -7596,6 +7607,7 @@
#ifdef CONFIG_SMP
rq->sd = NULL;
rq->rd = NULL;
+ rq->cpu_power = SCHED_LOAD_SCALE;
rq->post_schedule = 0;
rq->active_balance = 0;
rq->next_balance = jiffies;
diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c
index 87a330a..3556539 100644
--- a/kernel/sched_debug.c
+++ b/kernel/sched_debug.c
@@ -381,15 +381,9 @@
void proc_sched_show_task(struct task_struct *p, struct seq_file *m)
{
unsigned long nr_switches;
- unsigned long flags;
- int num_threads = 1;
- if (lock_task_sighand(p, &flags)) {
- num_threads = atomic_read(&p->signal->count);
- unlock_task_sighand(p, &flags);
- }
-
- SEQ_printf(m, "%s (%d, #threads: %d)\n", p->comm, p->pid, num_threads);
+ SEQ_printf(m, "%s (%d, #threads: %d)\n", p->comm, p->pid,
+ get_nr_threads(p));
SEQ_printf(m,
"---------------------------------------------------------\n");
#define __P(F) \
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 217e4a9..a878b53 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -1225,7 +1225,6 @@
unsigned long this_load, load;
int idx, this_cpu, prev_cpu;
unsigned long tl_per_task;
- unsigned int imbalance;
struct task_group *tg;
unsigned long weight;
int balanced;
@@ -1241,6 +1240,7 @@
* effect of the currently running task from the load
* of the current CPU:
*/
+ rcu_read_lock();
if (sync) {
tg = task_group(current);
weight = current->se.load.weight;
@@ -1252,8 +1252,6 @@
tg = task_group(p);
weight = p->se.load.weight;
- imbalance = 100 + (sd->imbalance_pct - 100) / 2;
-
/*
* In low-load situations, where prev_cpu is idle and this_cpu is idle
* due to the sync cause above having dropped this_load to 0, we'll
@@ -1263,9 +1261,22 @@
* Otherwise check if either cpus are near enough in load to allow this
* task to be woken on this_cpu.
*/
- balanced = !this_load ||
- 100*(this_load + effective_load(tg, this_cpu, weight, weight)) <=
- imbalance*(load + effective_load(tg, prev_cpu, 0, weight));
+ if (this_load) {
+ unsigned long this_eff_load, prev_eff_load;
+
+ this_eff_load = 100;
+ this_eff_load *= power_of(prev_cpu);
+ this_eff_load *= this_load +
+ effective_load(tg, this_cpu, weight, weight);
+
+ prev_eff_load = 100 + (sd->imbalance_pct - 100) / 2;
+ prev_eff_load *= power_of(this_cpu);
+ prev_eff_load *= load + effective_load(tg, prev_cpu, 0, weight);
+
+ balanced = this_eff_load <= prev_eff_load;
+ } else
+ balanced = true;
+ rcu_read_unlock();
/*
* If the currently running task will sleep within
@@ -2298,6 +2309,7 @@
if (!power)
power = 1;
+ cpu_rq(cpu)->cpu_power = power;
sdg->cpu_power = power;
}
diff --git a/kernel/signal.c b/kernel/signal.c
index 825a3f2..906ae5a 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -642,7 +642,7 @@
static int check_kill_permission(int sig, struct siginfo *info,
struct task_struct *t)
{
- const struct cred *cred = current_cred(), *tcred;
+ const struct cred *cred, *tcred;
struct pid *sid;
int error;
@@ -656,8 +656,10 @@
if (error)
return error;
+ cred = current_cred();
tcred = __task_cred(t);
- if ((cred->euid ^ tcred->suid) &&
+ if (!same_thread_group(current, t) &&
+ (cred->euid ^ tcred->suid) &&
(cred->euid ^ tcred->uid) &&
(cred->uid ^ tcred->suid) &&
(cred->uid ^ tcred->uid) &&
@@ -1083,23 +1085,24 @@
/*
* Nuke all other threads in the group.
*/
-void zap_other_threads(struct task_struct *p)
+int zap_other_threads(struct task_struct *p)
{
- struct task_struct *t;
+ struct task_struct *t = p;
+ int count = 0;
p->signal->group_stop_count = 0;
- for (t = next_thread(p); t != p; t = next_thread(t)) {
- /*
- * Don't bother with already dead threads
- */
+ while_each_thread(p, t) {
+ count++;
+
+ /* Don't bother with already dead threads */
if (t->exit_state)
continue;
-
- /* SIGKILL will be handled before any pending SIGSTOP */
sigaddset(&t->pending.signal, SIGKILL);
signal_wake_up(t, 1);
}
+
+ return count;
}
struct sighand_struct *lock_task_sighand(struct task_struct *tsk, unsigned long *flags)
diff --git a/kernel/smp.c b/kernel/smp.c
index 3fc6973..75c970c 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -52,7 +52,7 @@
case CPU_UP_PREPARE_FROZEN:
if (!zalloc_cpumask_var_node(&cfd->cpumask, GFP_KERNEL,
cpu_to_node(cpu)))
- return NOTIFY_BAD;
+ return notifier_from_errno(-ENOMEM);
break;
#ifdef CONFIG_HOTPLUG_CPU
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 0db913a..07b4f1b 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -808,7 +808,7 @@
p = kthread_create(run_ksoftirqd, hcpu, "ksoftirqd/%d", hotcpu);
if (IS_ERR(p)) {
printk("ksoftirqd for %i failed\n", hotcpu);
- return NOTIFY_BAD;
+ return notifier_from_errno(PTR_ERR(p));
}
kthread_bind(p, hotcpu);
per_cpu(ksoftirqd, hotcpu) = p;
@@ -850,7 +850,7 @@
void *cpu = (void *)(long)smp_processor_id();
int err = cpu_callback(&cpu_nfb, CPU_UP_PREPARE, cpu);
- BUG_ON(err == NOTIFY_BAD);
+ BUG_ON(err != NOTIFY_OK);
cpu_callback(&cpu_nfb, CPU_ONLINE, cpu);
register_cpu_notifier(&cpu_nfb);
return 0;
diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c
index b4e7431..70f8d90 100644
--- a/kernel/stop_machine.c
+++ b/kernel/stop_machine.c
@@ -321,7 +321,7 @@
#ifdef CONFIG_HOTPLUG_CPU
case CPU_UP_CANCELED:
- case CPU_DEAD:
+ case CPU_POST_DEAD:
{
struct cpu_stop_work *work;
diff --git a/kernel/sys.c b/kernel/sys.c
index 0d36d88..e83ddbb 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1632,9 +1632,9 @@
char poweroff_cmd[POWEROFF_CMD_PATH_LEN] = "/sbin/poweroff";
-static void argv_cleanup(char **argv, char **envp)
+static void argv_cleanup(struct subprocess_info *info)
{
- argv_free(argv);
+ argv_free(info->argv);
}
/**
@@ -1668,7 +1668,7 @@
goto out;
}
- call_usermodehelper_setcleanup(info, argv_cleanup);
+ call_usermodehelper_setfns(info, NULL, argv_cleanup, NULL);
ret = call_usermodehelper_exec(info, UMH_NO_WAIT);
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 997080f..d24f761 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1471,12 +1471,12 @@
},
#endif
{
- .procname = "pipe-max-pages",
- .data = &pipe_max_pages,
+ .procname = "pipe-max-size",
+ .data = &pipe_max_size,
.maxlen = sizeof(int),
.mode = 0644,
- .proc_handler = &proc_dointvec_minmax,
- .extra1 = &two,
+ .proc_handler = &pipe_proc_fn,
+ .extra1 = &pipe_min_size,
},
/*
* NOTE: do not add new entries to this table unless you have read
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 1d7b9bc..813993b 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -154,14 +154,14 @@
* Updates the per cpu time idle statistics counters
*/
static void
-update_ts_time_stats(struct tick_sched *ts, ktime_t now, u64 *last_update_time)
+update_ts_time_stats(int cpu, struct tick_sched *ts, ktime_t now, u64 *last_update_time)
{
ktime_t delta;
if (ts->idle_active) {
delta = ktime_sub(now, ts->idle_entrytime);
ts->idle_sleeptime = ktime_add(ts->idle_sleeptime, delta);
- if (nr_iowait_cpu() > 0)
+ if (nr_iowait_cpu(cpu) > 0)
ts->iowait_sleeptime = ktime_add(ts->iowait_sleeptime, delta);
ts->idle_entrytime = now;
}
@@ -175,19 +175,19 @@
{
struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
- update_ts_time_stats(ts, now, NULL);
+ update_ts_time_stats(cpu, ts, now, NULL);
ts->idle_active = 0;
sched_clock_idle_wakeup_event(0);
}
-static ktime_t tick_nohz_start_idle(struct tick_sched *ts)
+static ktime_t tick_nohz_start_idle(int cpu, struct tick_sched *ts)
{
ktime_t now;
now = ktime_get();
- update_ts_time_stats(ts, now, NULL);
+ update_ts_time_stats(cpu, ts, now, NULL);
ts->idle_entrytime = now;
ts->idle_active = 1;
@@ -216,7 +216,7 @@
if (!tick_nohz_enabled)
return -1;
- update_ts_time_stats(ts, ktime_get(), last_update_time);
+ update_ts_time_stats(cpu, ts, ktime_get(), last_update_time);
return ktime_to_us(ts->idle_sleeptime);
}
@@ -242,7 +242,7 @@
if (!tick_nohz_enabled)
return -1;
- update_ts_time_stats(ts, ktime_get(), last_update_time);
+ update_ts_time_stats(cpu, ts, ktime_get(), last_update_time);
return ktime_to_us(ts->iowait_sleeptime);
}
@@ -284,7 +284,7 @@
*/
ts->inidle = 1;
- now = tick_nohz_start_idle(ts);
+ now = tick_nohz_start_idle(cpu, ts);
/*
* If this cpu is offline and it is the one which updates
@@ -315,9 +315,6 @@
goto end;
}
- if (nohz_ratelimit(cpu))
- goto end;
-
ts->idle_calls++;
/* Read jiffies and the time when jiffies were updated last */
do {
@@ -328,7 +325,7 @@
} while (read_seqretry(&xtime_lock, seq));
if (rcu_needs_cpu(cpu) || printk_needs_cpu(cpu) ||
- arch_needs_cpu(cpu)) {
+ arch_needs_cpu(cpu) || nohz_ratelimit(cpu)) {
next_jiffies = last_jiffies + 1;
delta_jiffies = 1;
} else {
diff --git a/kernel/timer.c b/kernel/timer.c
index be394af..ee305c8 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -752,11 +752,15 @@
expires_limit = expires;
- if (timer->slack > -1)
+ if (timer->slack >= 0) {
expires_limit = expires + timer->slack;
- else if (time_after(expires, jiffies)) /* auto slack: use 0.4% */
- expires_limit = expires + (expires - jiffies)/256;
+ } else {
+ unsigned long now = jiffies;
+ /* No slack, if already expired else auto slack 0.4% */
+ if (time_after(expires, now))
+ expires_limit = expires + (expires - now)/256;
+ }
mask = expires ^ expires_limit;
if (mask == 0)
return expires;
@@ -1680,11 +1684,14 @@
unsigned long action, void *hcpu)
{
long cpu = (long)hcpu;
+ int err;
+
switch(action) {
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
- if (init_timers_cpu(cpu) < 0)
- return NOTIFY_BAD;
+ err = init_timers_cpu(cpu);
+ if (err < 0)
+ return notifier_from_errno(err);
break;
#ifdef CONFIG_HOTPLUG_CPU
case CPU_DEAD:
@@ -1710,7 +1717,7 @@
init_timer_stats();
- BUG_ON(err == NOTIFY_BAD);
+ BUG_ON(err != NOTIFY_OK);
register_cpu_notifier(&timers_nb);
open_softirq(TIMER_SOFTIRQ, run_timer_softirq);
}
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index b3bc91a..638711c 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -675,28 +675,33 @@
}
}
-static void blk_add_trace_rq_abort(struct request_queue *q, struct request *rq)
+static void blk_add_trace_rq_abort(void *ignore,
+ struct request_queue *q, struct request *rq)
{
blk_add_trace_rq(q, rq, BLK_TA_ABORT);
}
-static void blk_add_trace_rq_insert(struct request_queue *q, struct request *rq)
+static void blk_add_trace_rq_insert(void *ignore,
+ struct request_queue *q, struct request *rq)
{
blk_add_trace_rq(q, rq, BLK_TA_INSERT);
}
-static void blk_add_trace_rq_issue(struct request_queue *q, struct request *rq)
+static void blk_add_trace_rq_issue(void *ignore,
+ struct request_queue *q, struct request *rq)
{
blk_add_trace_rq(q, rq, BLK_TA_ISSUE);
}
-static void blk_add_trace_rq_requeue(struct request_queue *q,
+static void blk_add_trace_rq_requeue(void *ignore,
+ struct request_queue *q,
struct request *rq)
{
blk_add_trace_rq(q, rq, BLK_TA_REQUEUE);
}
-static void blk_add_trace_rq_complete(struct request_queue *q,
+static void blk_add_trace_rq_complete(void *ignore,
+ struct request_queue *q,
struct request *rq)
{
blk_add_trace_rq(q, rq, BLK_TA_COMPLETE);
@@ -724,34 +729,40 @@
!bio_flagged(bio, BIO_UPTODATE), 0, NULL);
}
-static void blk_add_trace_bio_bounce(struct request_queue *q, struct bio *bio)
+static void blk_add_trace_bio_bounce(void *ignore,
+ struct request_queue *q, struct bio *bio)
{
blk_add_trace_bio(q, bio, BLK_TA_BOUNCE);
}
-static void blk_add_trace_bio_complete(struct request_queue *q, struct bio *bio)
+static void blk_add_trace_bio_complete(void *ignore,
+ struct request_queue *q, struct bio *bio)
{
blk_add_trace_bio(q, bio, BLK_TA_COMPLETE);
}
-static void blk_add_trace_bio_backmerge(struct request_queue *q,
+static void blk_add_trace_bio_backmerge(void *ignore,
+ struct request_queue *q,
struct bio *bio)
{
blk_add_trace_bio(q, bio, BLK_TA_BACKMERGE);
}
-static void blk_add_trace_bio_frontmerge(struct request_queue *q,
+static void blk_add_trace_bio_frontmerge(void *ignore,
+ struct request_queue *q,
struct bio *bio)
{
blk_add_trace_bio(q, bio, BLK_TA_FRONTMERGE);
}
-static void blk_add_trace_bio_queue(struct request_queue *q, struct bio *bio)
+static void blk_add_trace_bio_queue(void *ignore,
+ struct request_queue *q, struct bio *bio)
{
blk_add_trace_bio(q, bio, BLK_TA_QUEUE);
}
-static void blk_add_trace_getrq(struct request_queue *q,
+static void blk_add_trace_getrq(void *ignore,
+ struct request_queue *q,
struct bio *bio, int rw)
{
if (bio)
@@ -765,7 +776,8 @@
}
-static void blk_add_trace_sleeprq(struct request_queue *q,
+static void blk_add_trace_sleeprq(void *ignore,
+ struct request_queue *q,
struct bio *bio, int rw)
{
if (bio)
@@ -779,7 +791,7 @@
}
}
-static void blk_add_trace_plug(struct request_queue *q)
+static void blk_add_trace_plug(void *ignore, struct request_queue *q)
{
struct blk_trace *bt = q->blk_trace;
@@ -787,7 +799,7 @@
__blk_add_trace(bt, 0, 0, 0, BLK_TA_PLUG, 0, 0, NULL);
}
-static void blk_add_trace_unplug_io(struct request_queue *q)
+static void blk_add_trace_unplug_io(void *ignore, struct request_queue *q)
{
struct blk_trace *bt = q->blk_trace;
@@ -800,7 +812,7 @@
}
}
-static void blk_add_trace_unplug_timer(struct request_queue *q)
+static void blk_add_trace_unplug_timer(void *ignore, struct request_queue *q)
{
struct blk_trace *bt = q->blk_trace;
@@ -813,7 +825,8 @@
}
}
-static void blk_add_trace_split(struct request_queue *q, struct bio *bio,
+static void blk_add_trace_split(void *ignore,
+ struct request_queue *q, struct bio *bio,
unsigned int pdu)
{
struct blk_trace *bt = q->blk_trace;
@@ -829,6 +842,7 @@
/**
* blk_add_trace_remap - Add a trace for a remap operation
+ * @ignore: trace callback data parameter (not used)
* @q: queue the io is for
* @bio: the source bio
* @dev: target device
@@ -839,8 +853,9 @@
* it spans a stripe (or similar). Add a trace for that action.
*
**/
-static void blk_add_trace_remap(struct request_queue *q, struct bio *bio,
- dev_t dev, sector_t from)
+static void blk_add_trace_remap(void *ignore,
+ struct request_queue *q, struct bio *bio,
+ dev_t dev, sector_t from)
{
struct blk_trace *bt = q->blk_trace;
struct blk_io_trace_remap r;
@@ -859,6 +874,7 @@
/**
* blk_add_trace_rq_remap - Add a trace for a request-remap operation
+ * @ignore: trace callback data parameter (not used)
* @q: queue the io is for
* @rq: the source request
* @dev: target device
@@ -869,7 +885,8 @@
* Add a trace for that action.
*
**/
-static void blk_add_trace_rq_remap(struct request_queue *q,
+static void blk_add_trace_rq_remap(void *ignore,
+ struct request_queue *q,
struct request *rq, dev_t dev,
sector_t from)
{
@@ -921,64 +938,64 @@
{
int ret;
- ret = register_trace_block_rq_abort(blk_add_trace_rq_abort);
+ ret = register_trace_block_rq_abort(blk_add_trace_rq_abort, NULL);
WARN_ON(ret);
- ret = register_trace_block_rq_insert(blk_add_trace_rq_insert);
+ ret = register_trace_block_rq_insert(blk_add_trace_rq_insert, NULL);
WARN_ON(ret);
- ret = register_trace_block_rq_issue(blk_add_trace_rq_issue);
+ ret = register_trace_block_rq_issue(blk_add_trace_rq_issue, NULL);
WARN_ON(ret);
- ret = register_trace_block_rq_requeue(blk_add_trace_rq_requeue);
+ ret = register_trace_block_rq_requeue(blk_add_trace_rq_requeue, NULL);
WARN_ON(ret);
- ret = register_trace_block_rq_complete(blk_add_trace_rq_complete);
+ ret = register_trace_block_rq_complete(blk_add_trace_rq_complete, NULL);
WARN_ON(ret);
- ret = register_trace_block_bio_bounce(blk_add_trace_bio_bounce);
+ ret = register_trace_block_bio_bounce(blk_add_trace_bio_bounce, NULL);
WARN_ON(ret);
- ret = register_trace_block_bio_complete(blk_add_trace_bio_complete);
+ ret = register_trace_block_bio_complete(blk_add_trace_bio_complete, NULL);
WARN_ON(ret);
- ret = register_trace_block_bio_backmerge(blk_add_trace_bio_backmerge);
+ ret = register_trace_block_bio_backmerge(blk_add_trace_bio_backmerge, NULL);
WARN_ON(ret);
- ret = register_trace_block_bio_frontmerge(blk_add_trace_bio_frontmerge);
+ ret = register_trace_block_bio_frontmerge(blk_add_trace_bio_frontmerge, NULL);
WARN_ON(ret);
- ret = register_trace_block_bio_queue(blk_add_trace_bio_queue);
+ ret = register_trace_block_bio_queue(blk_add_trace_bio_queue, NULL);
WARN_ON(ret);
- ret = register_trace_block_getrq(blk_add_trace_getrq);
+ ret = register_trace_block_getrq(blk_add_trace_getrq, NULL);
WARN_ON(ret);
- ret = register_trace_block_sleeprq(blk_add_trace_sleeprq);
+ ret = register_trace_block_sleeprq(blk_add_trace_sleeprq, NULL);
WARN_ON(ret);
- ret = register_trace_block_plug(blk_add_trace_plug);
+ ret = register_trace_block_plug(blk_add_trace_plug, NULL);
WARN_ON(ret);
- ret = register_trace_block_unplug_timer(blk_add_trace_unplug_timer);
+ ret = register_trace_block_unplug_timer(blk_add_trace_unplug_timer, NULL);
WARN_ON(ret);
- ret = register_trace_block_unplug_io(blk_add_trace_unplug_io);
+ ret = register_trace_block_unplug_io(blk_add_trace_unplug_io, NULL);
WARN_ON(ret);
- ret = register_trace_block_split(blk_add_trace_split);
+ ret = register_trace_block_split(blk_add_trace_split, NULL);
WARN_ON(ret);
- ret = register_trace_block_remap(blk_add_trace_remap);
+ ret = register_trace_block_remap(blk_add_trace_remap, NULL);
WARN_ON(ret);
- ret = register_trace_block_rq_remap(blk_add_trace_rq_remap);
+ ret = register_trace_block_rq_remap(blk_add_trace_rq_remap, NULL);
WARN_ON(ret);
}
static void blk_unregister_tracepoints(void)
{
- unregister_trace_block_rq_remap(blk_add_trace_rq_remap);
- unregister_trace_block_remap(blk_add_trace_remap);
- unregister_trace_block_split(blk_add_trace_split);
- unregister_trace_block_unplug_io(blk_add_trace_unplug_io);
- unregister_trace_block_unplug_timer(blk_add_trace_unplug_timer);
- unregister_trace_block_plug(blk_add_trace_plug);
- unregister_trace_block_sleeprq(blk_add_trace_sleeprq);
- unregister_trace_block_getrq(blk_add_trace_getrq);
- unregister_trace_block_bio_queue(blk_add_trace_bio_queue);
- unregister_trace_block_bio_frontmerge(blk_add_trace_bio_frontmerge);
- unregister_trace_block_bio_backmerge(blk_add_trace_bio_backmerge);
- unregister_trace_block_bio_complete(blk_add_trace_bio_complete);
- unregister_trace_block_bio_bounce(blk_add_trace_bio_bounce);
- unregister_trace_block_rq_complete(blk_add_trace_rq_complete);
- unregister_trace_block_rq_requeue(blk_add_trace_rq_requeue);
- unregister_trace_block_rq_issue(blk_add_trace_rq_issue);
- unregister_trace_block_rq_insert(blk_add_trace_rq_insert);
- unregister_trace_block_rq_abort(blk_add_trace_rq_abort);
+ unregister_trace_block_rq_remap(blk_add_trace_rq_remap, NULL);
+ unregister_trace_block_remap(blk_add_trace_remap, NULL);
+ unregister_trace_block_split(blk_add_trace_split, NULL);
+ unregister_trace_block_unplug_io(blk_add_trace_unplug_io, NULL);
+ unregister_trace_block_unplug_timer(blk_add_trace_unplug_timer, NULL);
+ unregister_trace_block_plug(blk_add_trace_plug, NULL);
+ unregister_trace_block_sleeprq(blk_add_trace_sleeprq, NULL);
+ unregister_trace_block_getrq(blk_add_trace_getrq, NULL);
+ unregister_trace_block_bio_queue(blk_add_trace_bio_queue, NULL);
+ unregister_trace_block_bio_frontmerge(blk_add_trace_bio_frontmerge, NULL);
+ unregister_trace_block_bio_backmerge(blk_add_trace_bio_backmerge, NULL);
+ unregister_trace_block_bio_complete(blk_add_trace_bio_complete, NULL);
+ unregister_trace_block_bio_bounce(blk_add_trace_bio_bounce, NULL);
+ unregister_trace_block_rq_complete(blk_add_trace_rq_complete, NULL);
+ unregister_trace_block_rq_requeue(blk_add_trace_rq_requeue, NULL);
+ unregister_trace_block_rq_issue(blk_add_trace_rq_issue, NULL);
+ unregister_trace_block_rq_insert(blk_add_trace_rq_insert, NULL);
+ unregister_trace_block_rq_abort(blk_add_trace_rq_abort, NULL);
tracepoint_synchronize_unregister();
}
@@ -1321,7 +1338,7 @@
}
static enum print_line_t blk_trace_event_print(struct trace_iterator *iter,
- int flags)
+ int flags, struct trace_event *event)
{
return print_one_line(iter, false);
}
@@ -1343,7 +1360,8 @@
}
static enum print_line_t
-blk_trace_event_print_binary(struct trace_iterator *iter, int flags)
+blk_trace_event_print_binary(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
return blk_trace_synthesize_old_trace(iter) ?
TRACE_TYPE_HANDLED : TRACE_TYPE_PARTIAL_LINE;
@@ -1381,12 +1399,16 @@
.set_flag = blk_tracer_set_flag,
};
-static struct trace_event trace_blk_event = {
- .type = TRACE_BLK,
+static struct trace_event_functions trace_blk_event_funcs = {
.trace = blk_trace_event_print,
.binary = blk_trace_event_print_binary,
};
+static struct trace_event trace_blk_event = {
+ .type = TRACE_BLK,
+ .funcs = &trace_blk_event_funcs,
+};
+
static int __init init_blk_tracer(void)
{
if (!register_ftrace_event(&trace_blk_event)) {
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 32837e1..6d2cb14 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -3234,7 +3234,8 @@
}
static void
-ftrace_graph_probe_sched_switch(struct task_struct *prev, struct task_struct *next)
+ftrace_graph_probe_sched_switch(void *ignore,
+ struct task_struct *prev, struct task_struct *next)
{
unsigned long long timestamp;
int index;
@@ -3288,7 +3289,7 @@
} while (ret == -EAGAIN);
if (!ret) {
- ret = register_trace_sched_switch(ftrace_graph_probe_sched_switch);
+ ret = register_trace_sched_switch(ftrace_graph_probe_sched_switch, NULL);
if (ret)
pr_info("ftrace_graph: Couldn't activate tracepoint"
" probe to kernel_sched_switch\n");
@@ -3364,7 +3365,7 @@
ftrace_graph_entry = ftrace_graph_entry_stub;
ftrace_shutdown(FTRACE_STOP_FUNC_RET);
unregister_pm_notifier(&ftrace_suspend_notifier);
- unregister_trace_sched_switch(ftrace_graph_probe_sched_switch);
+ unregister_trace_sched_switch(ftrace_graph_probe_sched_switch, NULL);
out:
mutex_unlock(&ftrace_lock);
diff --git a/kernel/trace/kmemtrace.c b/kernel/trace/kmemtrace.c
index a91da69..bbfc1bb 100644
--- a/kernel/trace/kmemtrace.c
+++ b/kernel/trace/kmemtrace.c
@@ -95,7 +95,8 @@
trace_wake_up();
}
-static void kmemtrace_kmalloc(unsigned long call_site,
+static void kmemtrace_kmalloc(void *ignore,
+ unsigned long call_site,
const void *ptr,
size_t bytes_req,
size_t bytes_alloc,
@@ -105,7 +106,8 @@
bytes_req, bytes_alloc, gfp_flags, -1);
}
-static void kmemtrace_kmem_cache_alloc(unsigned long call_site,
+static void kmemtrace_kmem_cache_alloc(void *ignore,
+ unsigned long call_site,
const void *ptr,
size_t bytes_req,
size_t bytes_alloc,
@@ -115,7 +117,8 @@
bytes_req, bytes_alloc, gfp_flags, -1);
}
-static void kmemtrace_kmalloc_node(unsigned long call_site,
+static void kmemtrace_kmalloc_node(void *ignore,
+ unsigned long call_site,
const void *ptr,
size_t bytes_req,
size_t bytes_alloc,
@@ -126,7 +129,8 @@
bytes_req, bytes_alloc, gfp_flags, node);
}
-static void kmemtrace_kmem_cache_alloc_node(unsigned long call_site,
+static void kmemtrace_kmem_cache_alloc_node(void *ignore,
+ unsigned long call_site,
const void *ptr,
size_t bytes_req,
size_t bytes_alloc,
@@ -137,12 +141,14 @@
bytes_req, bytes_alloc, gfp_flags, node);
}
-static void kmemtrace_kfree(unsigned long call_site, const void *ptr)
+static void
+kmemtrace_kfree(void *ignore, unsigned long call_site, const void *ptr)
{
kmemtrace_free(KMEMTRACE_TYPE_KMALLOC, call_site, ptr);
}
-static void kmemtrace_kmem_cache_free(unsigned long call_site, const void *ptr)
+static void kmemtrace_kmem_cache_free(void *ignore,
+ unsigned long call_site, const void *ptr)
{
kmemtrace_free(KMEMTRACE_TYPE_CACHE, call_site, ptr);
}
@@ -151,34 +157,34 @@
{
int err;
- err = register_trace_kmalloc(kmemtrace_kmalloc);
+ err = register_trace_kmalloc(kmemtrace_kmalloc, NULL);
if (err)
return err;
- err = register_trace_kmem_cache_alloc(kmemtrace_kmem_cache_alloc);
+ err = register_trace_kmem_cache_alloc(kmemtrace_kmem_cache_alloc, NULL);
if (err)
return err;
- err = register_trace_kmalloc_node(kmemtrace_kmalloc_node);
+ err = register_trace_kmalloc_node(kmemtrace_kmalloc_node, NULL);
if (err)
return err;
- err = register_trace_kmem_cache_alloc_node(kmemtrace_kmem_cache_alloc_node);
+ err = register_trace_kmem_cache_alloc_node(kmemtrace_kmem_cache_alloc_node, NULL);
if (err)
return err;
- err = register_trace_kfree(kmemtrace_kfree);
+ err = register_trace_kfree(kmemtrace_kfree, NULL);
if (err)
return err;
- err = register_trace_kmem_cache_free(kmemtrace_kmem_cache_free);
+ err = register_trace_kmem_cache_free(kmemtrace_kmem_cache_free, NULL);
return err;
}
static void kmemtrace_stop_probes(void)
{
- unregister_trace_kmalloc(kmemtrace_kmalloc);
- unregister_trace_kmem_cache_alloc(kmemtrace_kmem_cache_alloc);
- unregister_trace_kmalloc_node(kmemtrace_kmalloc_node);
- unregister_trace_kmem_cache_alloc_node(kmemtrace_kmem_cache_alloc_node);
- unregister_trace_kfree(kmemtrace_kfree);
- unregister_trace_kmem_cache_free(kmemtrace_kmem_cache_free);
+ unregister_trace_kmalloc(kmemtrace_kmalloc, NULL);
+ unregister_trace_kmem_cache_alloc(kmemtrace_kmem_cache_alloc, NULL);
+ unregister_trace_kmalloc_node(kmemtrace_kmalloc_node, NULL);
+ unregister_trace_kmem_cache_alloc_node(kmemtrace_kmem_cache_alloc_node, NULL);
+ unregister_trace_kfree(kmemtrace_kfree, NULL);
+ unregister_trace_kmem_cache_free(kmemtrace_kmem_cache_free, NULL);
}
static int kmem_trace_init(struct trace_array *tr)
@@ -237,7 +243,8 @@
};
static enum print_line_t
-kmemtrace_print_alloc(struct trace_iterator *iter, int flags)
+kmemtrace_print_alloc(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
struct trace_seq *s = &iter->seq;
struct kmemtrace_alloc_entry *entry;
@@ -257,7 +264,8 @@
}
static enum print_line_t
-kmemtrace_print_free(struct trace_iterator *iter, int flags)
+kmemtrace_print_free(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
struct trace_seq *s = &iter->seq;
struct kmemtrace_free_entry *entry;
@@ -275,7 +283,8 @@
}
static enum print_line_t
-kmemtrace_print_alloc_user(struct trace_iterator *iter, int flags)
+kmemtrace_print_alloc_user(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
struct trace_seq *s = &iter->seq;
struct kmemtrace_alloc_entry *entry;
@@ -309,7 +318,8 @@
}
static enum print_line_t
-kmemtrace_print_free_user(struct trace_iterator *iter, int flags)
+kmemtrace_print_free_user(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
struct trace_seq *s = &iter->seq;
struct kmemtrace_free_entry *entry;
@@ -463,18 +473,26 @@
}
}
-static struct trace_event kmem_trace_alloc = {
- .type = TRACE_KMEM_ALLOC,
+static struct trace_event_functions kmem_trace_alloc_funcs = {
.trace = kmemtrace_print_alloc,
.binary = kmemtrace_print_alloc_user,
};
-static struct trace_event kmem_trace_free = {
- .type = TRACE_KMEM_FREE,
+static struct trace_event kmem_trace_alloc = {
+ .type = TRACE_KMEM_ALLOC,
+ .funcs = &kmem_trace_alloc_funcs,
+};
+
+static struct trace_event_functions kmem_trace_free_funcs = {
.trace = kmemtrace_print_free,
.binary = kmemtrace_print_free_user,
};
+static struct trace_event kmem_trace_free = {
+ .type = TRACE_KMEM_FREE,
+ .funcs = &kmem_trace_free_funcs,
+};
+
static struct tracer kmem_tracer __read_mostly = {
.name = "kmemtrace",
.init = kmem_trace_init,
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 7f6059c..1da7b6e 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -1768,6 +1768,14 @@
* must fill the old tail_page with padding.
*/
if (tail >= BUF_PAGE_SIZE) {
+ /*
+ * If the page was filled, then we still need
+ * to update the real_end. Reset it to zero
+ * and the reader will ignore it.
+ */
+ if (tail == BUF_PAGE_SIZE)
+ tail_page->real_end = 0;
+
local_sub(length, &tail_page->write);
return;
}
@@ -3894,12 +3902,12 @@
ret = read;
cpu_buffer->lost_events = 0;
+
+ commit = local_read(&bpage->commit);
/*
* Set a flag in the commit field if we lost events
*/
if (missed_events) {
- commit = local_read(&bpage->commit);
-
/* If there is room at the end of the page to save the
* missed events, then record it there.
*/
@@ -3907,10 +3915,17 @@
memcpy(&bpage->data[commit], &missed_events,
sizeof(missed_events));
local_add(RB_MISSED_STORED, &bpage->commit);
+ commit += sizeof(missed_events);
}
local_add(RB_MISSED_EVENTS, &bpage->commit);
}
+ /*
+ * This page may be off to user land. Zero it out here.
+ */
+ if (commit < BUF_PAGE_SIZE)
+ memset(&bpage->data[commit], 0, BUF_PAGE_SIZE - commit);
+
out_unlock:
spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 8a76339..086d363 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1936,7 +1936,7 @@
}
if (event)
- return event->trace(iter, sym_flags);
+ return event->funcs->trace(iter, sym_flags, event);
if (!trace_seq_printf(s, "Unknown type %d\n", entry->type))
goto partial;
@@ -1962,7 +1962,7 @@
event = ftrace_find_event(entry->type);
if (event)
- return event->raw(iter, 0);
+ return event->funcs->raw(iter, 0, event);
if (!trace_seq_printf(s, "%d ?\n", entry->type))
goto partial;
@@ -1989,7 +1989,7 @@
event = ftrace_find_event(entry->type);
if (event) {
- enum print_line_t ret = event->hex(iter, 0);
+ enum print_line_t ret = event->funcs->hex(iter, 0, event);
if (ret != TRACE_TYPE_HANDLED)
return ret;
}
@@ -2014,7 +2014,8 @@
}
event = ftrace_find_event(entry->type);
- return event ? event->binary(iter, 0) : TRACE_TYPE_HANDLED;
+ return event ? event->funcs->binary(iter, 0, event) :
+ TRACE_TYPE_HANDLED;
}
int trace_empty(struct trace_iterator *iter)
@@ -3665,7 +3666,6 @@
size_t count, loff_t *ppos)
{
struct ftrace_buffer_info *info = filp->private_data;
- unsigned int pos;
ssize_t ret;
size_t size;
@@ -3692,11 +3692,6 @@
if (ret < 0)
return 0;
- pos = ring_buffer_page_len(info->spare);
-
- if (pos < PAGE_SIZE)
- memset(info->spare + pos, 0, PAGE_SIZE - pos);
-
read:
size = PAGE_SIZE - info->read;
if (size > count)
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index d1ce0be..2cd9639 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -405,12 +405,12 @@
void __trace_stack(struct trace_array *tr, unsigned long flags, int skip,
int pc);
#else
-static inline void ftrace_trace_stack(struct trace_array *tr,
+static inline void ftrace_trace_stack(struct ring_buffer *buffer,
unsigned long flags, int skip, int pc)
{
}
-static inline void ftrace_trace_userstack(struct trace_array *tr,
+static inline void ftrace_trace_userstack(struct ring_buffer *buffer,
unsigned long flags, int pc)
{
}
@@ -778,12 +778,15 @@
struct trace_seq *s);
extern int filter_assign_type(const char *type);
+struct list_head *
+trace_get_fields(struct ftrace_event_call *event_call);
+
static inline int
filter_check_discard(struct ftrace_event_call *call, void *rec,
struct ring_buffer *buffer,
struct ring_buffer_event *event)
{
- if (unlikely(call->filter_active) &&
+ if (unlikely(call->flags & TRACE_EVENT_FL_FILTERED) &&
!filter_match_preds(call->filter, rec)) {
ring_buffer_discard_commit(buffer, event);
return 1;
diff --git a/kernel/trace/trace_branch.c b/kernel/trace/trace_branch.c
index b9bc4d4..8d3538b 100644
--- a/kernel/trace/trace_branch.c
+++ b/kernel/trace/trace_branch.c
@@ -143,7 +143,7 @@
}
static enum print_line_t trace_branch_print(struct trace_iterator *iter,
- int flags)
+ int flags, struct trace_event *event)
{
struct trace_branch *field;
@@ -167,9 +167,13 @@
" |\n");
}
+static struct trace_event_functions trace_branch_funcs = {
+ .trace = trace_branch_print,
+};
+
static struct trace_event trace_branch_event = {
.type = TRACE_BRANCH,
- .trace = trace_branch_print,
+ .funcs = &trace_branch_funcs,
};
static struct tracer branch_trace __read_mostly =
diff --git a/kernel/trace/trace_event_perf.c b/kernel/trace/trace_event_perf.c
index 0565bb4..8a2b73f 100644
--- a/kernel/trace/trace_event_perf.c
+++ b/kernel/trace/trace_event_perf.c
@@ -9,13 +9,9 @@
#include <linux/kprobes.h>
#include "trace.h"
-DEFINE_PER_CPU(struct pt_regs, perf_trace_regs);
-EXPORT_PER_CPU_SYMBOL_GPL(perf_trace_regs);
-
EXPORT_SYMBOL_GPL(perf_arch_fetch_caller_regs);
-static char *perf_trace_buf;
-static char *perf_trace_buf_nmi;
+static char *perf_trace_buf[4];
/*
* Force it to be aligned to unsigned long to avoid misaligned accesses
@@ -27,57 +23,84 @@
/* Count the events in use (per event id, not per instance) */
static int total_ref_count;
-static int perf_trace_event_enable(struct ftrace_event_call *event)
+static int perf_trace_event_init(struct ftrace_event_call *tp_event,
+ struct perf_event *p_event)
{
- char *buf;
+ struct hlist_head *list;
int ret = -ENOMEM;
+ int cpu;
- if (event->perf_refcount++ > 0)
+ p_event->tp_event = tp_event;
+ if (tp_event->perf_refcount++ > 0)
return 0;
+ list = alloc_percpu(struct hlist_head);
+ if (!list)
+ goto fail;
+
+ for_each_possible_cpu(cpu)
+ INIT_HLIST_HEAD(per_cpu_ptr(list, cpu));
+
+ tp_event->perf_events = list;
+
if (!total_ref_count) {
- buf = (char *)alloc_percpu(perf_trace_t);
- if (!buf)
- goto fail_buf;
+ char *buf;
+ int i;
- rcu_assign_pointer(perf_trace_buf, buf);
+ for (i = 0; i < 4; i++) {
+ buf = (char *)alloc_percpu(perf_trace_t);
+ if (!buf)
+ goto fail;
- buf = (char *)alloc_percpu(perf_trace_t);
- if (!buf)
- goto fail_buf_nmi;
-
- rcu_assign_pointer(perf_trace_buf_nmi, buf);
+ perf_trace_buf[i] = buf;
+ }
}
- ret = event->perf_event_enable(event);
- if (!ret) {
- total_ref_count++;
- return 0;
- }
+ if (tp_event->class->reg)
+ ret = tp_event->class->reg(tp_event, TRACE_REG_PERF_REGISTER);
+ else
+ ret = tracepoint_probe_register(tp_event->name,
+ tp_event->class->perf_probe,
+ tp_event);
-fail_buf_nmi:
+ if (ret)
+ goto fail;
+
+ total_ref_count++;
+ return 0;
+
+fail:
if (!total_ref_count) {
- free_percpu(perf_trace_buf_nmi);
- free_percpu(perf_trace_buf);
- perf_trace_buf_nmi = NULL;
- perf_trace_buf = NULL;
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ free_percpu(perf_trace_buf[i]);
+ perf_trace_buf[i] = NULL;
+ }
}
-fail_buf:
- event->perf_refcount--;
+
+ if (!--tp_event->perf_refcount) {
+ free_percpu(tp_event->perf_events);
+ tp_event->perf_events = NULL;
+ }
return ret;
}
-int perf_trace_enable(int event_id)
+int perf_trace_init(struct perf_event *p_event)
{
- struct ftrace_event_call *event;
+ struct ftrace_event_call *tp_event;
+ int event_id = p_event->attr.config;
int ret = -EINVAL;
mutex_lock(&event_mutex);
- list_for_each_entry(event, &ftrace_events, list) {
- if (event->id == event_id && event->perf_event_enable &&
- try_module_get(event->mod)) {
- ret = perf_trace_event_enable(event);
+ list_for_each_entry(tp_event, &ftrace_events, list) {
+ if (tp_event->event.type == event_id &&
+ tp_event->class &&
+ (tp_event->class->perf_probe ||
+ tp_event->class->reg) &&
+ try_module_get(tp_event->mod)) {
+ ret = perf_trace_event_init(tp_event, p_event);
break;
}
}
@@ -86,90 +109,87 @@
return ret;
}
-static void perf_trace_event_disable(struct ftrace_event_call *event)
+int perf_trace_enable(struct perf_event *p_event)
{
- char *buf, *nmi_buf;
+ struct ftrace_event_call *tp_event = p_event->tp_event;
+ struct hlist_head *list;
- if (--event->perf_refcount > 0)
- return;
+ list = tp_event->perf_events;
+ if (WARN_ON_ONCE(!list))
+ return -EINVAL;
- event->perf_event_disable(event);
+ list = this_cpu_ptr(list);
+ hlist_add_head_rcu(&p_event->hlist_entry, list);
- if (!--total_ref_count) {
- buf = perf_trace_buf;
- rcu_assign_pointer(perf_trace_buf, NULL);
-
- nmi_buf = perf_trace_buf_nmi;
- rcu_assign_pointer(perf_trace_buf_nmi, NULL);
-
- /*
- * Ensure every events in profiling have finished before
- * releasing the buffers
- */
- synchronize_sched();
-
- free_percpu(buf);
- free_percpu(nmi_buf);
- }
+ return 0;
}
-void perf_trace_disable(int event_id)
+void perf_trace_disable(struct perf_event *p_event)
{
- struct ftrace_event_call *event;
+ hlist_del_rcu(&p_event->hlist_entry);
+}
+
+void perf_trace_destroy(struct perf_event *p_event)
+{
+ struct ftrace_event_call *tp_event = p_event->tp_event;
+ int i;
mutex_lock(&event_mutex);
- list_for_each_entry(event, &ftrace_events, list) {
- if (event->id == event_id) {
- perf_trace_event_disable(event);
- module_put(event->mod);
- break;
+ if (--tp_event->perf_refcount > 0)
+ goto out;
+
+ if (tp_event->class->reg)
+ tp_event->class->reg(tp_event, TRACE_REG_PERF_UNREGISTER);
+ else
+ tracepoint_probe_unregister(tp_event->name,
+ tp_event->class->perf_probe,
+ tp_event);
+
+ /*
+ * Ensure our callback won't be called anymore. See
+ * tracepoint_probe_unregister() and __DO_TRACE().
+ */
+ synchronize_sched();
+
+ free_percpu(tp_event->perf_events);
+ tp_event->perf_events = NULL;
+
+ if (!--total_ref_count) {
+ for (i = 0; i < 4; i++) {
+ free_percpu(perf_trace_buf[i]);
+ perf_trace_buf[i] = NULL;
}
}
+out:
mutex_unlock(&event_mutex);
}
__kprobes void *perf_trace_buf_prepare(int size, unsigned short type,
- int *rctxp, unsigned long *irq_flags)
+ struct pt_regs *regs, int *rctxp)
{
struct trace_entry *entry;
- char *trace_buf, *raw_data;
- int pc, cpu;
+ unsigned long flags;
+ char *raw_data;
+ int pc;
BUILD_BUG_ON(PERF_MAX_TRACE_SIZE % sizeof(unsigned long));
pc = preempt_count();
- /* Protect the per cpu buffer, begin the rcu read side */
- local_irq_save(*irq_flags);
-
*rctxp = perf_swevent_get_recursion_context();
if (*rctxp < 0)
- goto err_recursion;
+ return NULL;
- cpu = smp_processor_id();
-
- if (in_nmi())
- trace_buf = rcu_dereference_sched(perf_trace_buf_nmi);
- else
- trace_buf = rcu_dereference_sched(perf_trace_buf);
-
- if (!trace_buf)
- goto err;
-
- raw_data = per_cpu_ptr(trace_buf, cpu);
+ raw_data = this_cpu_ptr(perf_trace_buf[*rctxp]);
/* zero the dead bytes from align to not leak stack to user */
memset(&raw_data[size - sizeof(u64)], 0, sizeof(u64));
entry = (struct trace_entry *)raw_data;
- tracing_generic_entry_update(entry, *irq_flags, pc);
+ local_save_flags(flags);
+ tracing_generic_entry_update(entry, flags, pc);
entry->type = type;
return raw_data;
-err:
- perf_swevent_put_recursion_context(*rctxp);
-err_recursion:
- local_irq_restore(*irq_flags);
- return NULL;
}
EXPORT_SYMBOL_GPL(perf_trace_buf_prepare);
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index c697c70..53cffc0 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -29,11 +29,23 @@
LIST_HEAD(ftrace_events);
+struct list_head *
+trace_get_fields(struct ftrace_event_call *event_call)
+{
+ if (!event_call->class->get_fields)
+ return &event_call->class->fields;
+ return event_call->class->get_fields(event_call);
+}
+
int trace_define_field(struct ftrace_event_call *call, const char *type,
const char *name, int offset, int size, int is_signed,
int filter_type)
{
struct ftrace_event_field *field;
+ struct list_head *head;
+
+ if (WARN_ON(!call->class))
+ return 0;
field = kzalloc(sizeof(*field), GFP_KERNEL);
if (!field)
@@ -56,7 +68,8 @@
field->size = size;
field->is_signed = is_signed;
- list_add(&field->link, &call->fields);
+ head = trace_get_fields(call);
+ list_add(&field->link, head);
return 0;
@@ -94,8 +107,10 @@
void trace_destroy_fields(struct ftrace_event_call *call)
{
struct ftrace_event_field *field, *next;
+ struct list_head *head;
- list_for_each_entry_safe(field, next, &call->fields, link) {
+ head = trace_get_fields(call);
+ list_for_each_entry_safe(field, next, head, link) {
list_del(&field->link);
kfree(field->type);
kfree(field->name);
@@ -107,11 +122,9 @@
{
int id;
- id = register_ftrace_event(call->event);
+ id = register_ftrace_event(&call->event);
if (!id)
return -ENODEV;
- call->id = id;
- INIT_LIST_HEAD(&call->fields);
return 0;
}
@@ -124,23 +137,33 @@
switch (enable) {
case 0:
- if (call->enabled) {
- call->enabled = 0;
+ if (call->flags & TRACE_EVENT_FL_ENABLED) {
+ call->flags &= ~TRACE_EVENT_FL_ENABLED;
tracing_stop_cmdline_record();
- call->unregfunc(call);
+ if (call->class->reg)
+ call->class->reg(call, TRACE_REG_UNREGISTER);
+ else
+ tracepoint_probe_unregister(call->name,
+ call->class->probe,
+ call);
}
break;
case 1:
- if (!call->enabled) {
+ if (!(call->flags & TRACE_EVENT_FL_ENABLED)) {
tracing_start_cmdline_record();
- ret = call->regfunc(call);
+ if (call->class->reg)
+ ret = call->class->reg(call, TRACE_REG_REGISTER);
+ else
+ ret = tracepoint_probe_register(call->name,
+ call->class->probe,
+ call);
if (ret) {
tracing_stop_cmdline_record();
pr_info("event trace: Could not enable event "
"%s\n", call->name);
break;
}
- call->enabled = 1;
+ call->flags |= TRACE_EVENT_FL_ENABLED;
}
break;
}
@@ -171,15 +194,16 @@
mutex_lock(&event_mutex);
list_for_each_entry(call, &ftrace_events, list) {
- if (!call->name || !call->regfunc)
+ if (!call->name || !call->class ||
+ (!call->class->probe && !call->class->reg))
continue;
if (match &&
strcmp(match, call->name) != 0 &&
- strcmp(match, call->system) != 0)
+ strcmp(match, call->class->system) != 0)
continue;
- if (sub && strcmp(sub, call->system) != 0)
+ if (sub && strcmp(sub, call->class->system) != 0)
continue;
if (event && strcmp(event, call->name) != 0)
@@ -297,7 +321,7 @@
* The ftrace subsystem is for showing formats only.
* They can not be enabled or disabled via the event files.
*/
- if (call->regfunc)
+ if (call->class && (call->class->probe || call->class->reg))
return call;
}
@@ -328,7 +352,7 @@
(*pos)++;
list_for_each_entry_continue(call, &ftrace_events, list) {
- if (call->enabled)
+ if (call->flags & TRACE_EVENT_FL_ENABLED)
return call;
}
@@ -355,8 +379,8 @@
{
struct ftrace_event_call *call = v;
- if (strcmp(call->system, TRACE_SYSTEM) != 0)
- seq_printf(m, "%s:", call->system);
+ if (strcmp(call->class->system, TRACE_SYSTEM) != 0)
+ seq_printf(m, "%s:", call->class->system);
seq_printf(m, "%s\n", call->name);
return 0;
@@ -387,7 +411,7 @@
struct ftrace_event_call *call = filp->private_data;
char *buf;
- if (call->enabled)
+ if (call->flags & TRACE_EVENT_FL_ENABLED)
buf = "1\n";
else
buf = "0\n";
@@ -450,10 +474,11 @@
mutex_lock(&event_mutex);
list_for_each_entry(call, &ftrace_events, list) {
- if (!call->name || !call->regfunc)
+ if (!call->name || !call->class ||
+ (!call->class->probe && !call->class->reg))
continue;
- if (system && strcmp(call->system, system) != 0)
+ if (system && strcmp(call->class->system, system) != 0)
continue;
/*
@@ -461,7 +486,7 @@
* or if all events or cleared, or if we have
* a mixture.
*/
- set |= (1 << !!call->enabled);
+ set |= (1 << !!(call->flags & TRACE_EVENT_FL_ENABLED));
/*
* If we have a mixture, no need to look further.
@@ -525,6 +550,7 @@
{
struct ftrace_event_call *call = filp->private_data;
struct ftrace_event_field *field;
+ struct list_head *head;
struct trace_seq *s;
int common_field_count = 5;
char *buf;
@@ -540,10 +566,11 @@
trace_seq_init(s);
trace_seq_printf(s, "name: %s\n", call->name);
- trace_seq_printf(s, "ID: %d\n", call->id);
+ trace_seq_printf(s, "ID: %d\n", call->event.type);
trace_seq_printf(s, "format:\n");
- list_for_each_entry_reverse(field, &call->fields, link) {
+ head = trace_get_fields(call);
+ list_for_each_entry_reverse(field, head, link) {
/*
* Smartly shows the array type(except dynamic array).
* Normal:
@@ -613,7 +640,7 @@
return -ENOMEM;
trace_seq_init(s);
- trace_seq_printf(s, "%d\n", call->id);
+ trace_seq_printf(s, "%d\n", call->event.type);
r = simple_read_from_buffer(ubuf, cnt, ppos,
s->buffer, s->len);
@@ -919,14 +946,15 @@
const struct file_operations *filter,
const struct file_operations *format)
{
+ struct list_head *head;
int ret;
/*
* If the trace point header did not define TRACE_SYSTEM
* then the system would be called "TRACE_SYSTEM".
*/
- if (strcmp(call->system, TRACE_SYSTEM) != 0)
- d_events = event_subsystem_dir(call->system, d_events);
+ if (strcmp(call->class->system, TRACE_SYSTEM) != 0)
+ d_events = event_subsystem_dir(call->class->system, d_events);
call->dir = debugfs_create_dir(call->name, d_events);
if (!call->dir) {
@@ -935,22 +963,31 @@
return -1;
}
- if (call->regfunc)
+ if (call->class->probe || call->class->reg)
trace_create_file("enable", 0644, call->dir, call,
enable);
- if (call->id && call->perf_event_enable)
+#ifdef CONFIG_PERF_EVENTS
+ if (call->event.type && (call->class->perf_probe || call->class->reg))
trace_create_file("id", 0444, call->dir, call,
id);
+#endif
- if (call->define_fields) {
- ret = trace_define_common_fields(call);
- if (!ret)
- ret = call->define_fields(call);
- if (ret < 0) {
- pr_warning("Could not initialize trace point"
- " events/%s\n", call->name);
- return ret;
+ if (call->class->define_fields) {
+ /*
+ * Other events may have the same class. Only update
+ * the fields if they are not already defined.
+ */
+ head = trace_get_fields(call);
+ if (list_empty(head)) {
+ ret = trace_define_common_fields(call);
+ if (!ret)
+ ret = call->class->define_fields(call);
+ if (ret < 0) {
+ pr_warning("Could not initialize trace point"
+ " events/%s\n", call->name);
+ return ret;
+ }
}
trace_create_file("filter", 0644, call->dir, call,
filter);
@@ -970,8 +1007,8 @@
if (!call->name)
return -EINVAL;
- if (call->raw_init) {
- ret = call->raw_init(call);
+ if (call->class->raw_init) {
+ ret = call->class->raw_init(call);
if (ret < 0) {
if (ret != -ENOSYS)
pr_warning("Could not initialize trace "
@@ -1035,13 +1072,13 @@
static void __trace_remove_event_call(struct ftrace_event_call *call)
{
ftrace_event_enable_disable(call, 0);
- if (call->event)
- __unregister_ftrace_event(call->event);
+ if (call->event.funcs)
+ __unregister_ftrace_event(&call->event);
debugfs_remove_recursive(call->dir);
list_del(&call->list);
trace_destroy_fields(call);
destroy_preds(call);
- remove_subsystem_dir(call->system);
+ remove_subsystem_dir(call->class->system);
}
/* Remove an event_call */
@@ -1132,8 +1169,8 @@
/* The linker may leave blanks */
if (!call->name)
continue;
- if (call->raw_init) {
- ret = call->raw_init(call);
+ if (call->class->raw_init) {
+ ret = call->class->raw_init(call);
if (ret < 0) {
if (ret != -ENOSYS)
pr_warning("Could not initialize trace "
@@ -1286,8 +1323,8 @@
/* The linker may leave blanks */
if (!call->name)
continue;
- if (call->raw_init) {
- ret = call->raw_init(call);
+ if (call->class->raw_init) {
+ ret = call->class->raw_init(call);
if (ret < 0) {
if (ret != -ENOSYS)
pr_warning("Could not initialize trace "
@@ -1388,8 +1425,8 @@
list_for_each_entry(call, &ftrace_events, list) {
- /* Only test those that have a regfunc */
- if (!call->regfunc)
+ /* Only test those that have a probe */
+ if (!call->class || !call->class->probe)
continue;
/*
@@ -1399,8 +1436,8 @@
* syscalls as we test.
*/
#ifndef CONFIG_EVENT_TRACE_TEST_SYSCALLS
- if (call->system &&
- strcmp(call->system, "syscalls") == 0)
+ if (call->class->system &&
+ strcmp(call->class->system, "syscalls") == 0)
continue;
#endif
@@ -1410,7 +1447,7 @@
* If an event is already enabled, someone is using
* it and the self test should not be on.
*/
- if (call->enabled) {
+ if (call->flags & TRACE_EVENT_FL_ENABLED) {
pr_warning("Enabled event during self test!\n");
WARN_ON_ONCE(1);
continue;
diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c
index 58092d8..57bb1bb 100644
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -500,8 +500,10 @@
find_event_field(struct ftrace_event_call *call, char *name)
{
struct ftrace_event_field *field;
+ struct list_head *head;
- list_for_each_entry(field, &call->fields, link) {
+ head = trace_get_fields(call);
+ list_for_each_entry(field, head, link) {
if (!strcmp(field->name, name))
return field;
}
@@ -545,7 +547,7 @@
struct event_filter *filter = call->filter;
int i;
- call->filter_active = 0;
+ call->flags &= ~TRACE_EVENT_FL_FILTERED;
filter->n_preds = 0;
for (i = 0; i < MAX_FILTER_PRED; i++)
@@ -572,7 +574,7 @@
{
__free_preds(call->filter);
call->filter = NULL;
- call->filter_active = 0;
+ call->flags &= ~TRACE_EVENT_FL_FILTERED;
}
static struct event_filter *__alloc_preds(void)
@@ -611,7 +613,7 @@
if (call->filter)
return 0;
- call->filter_active = 0;
+ call->flags &= ~TRACE_EVENT_FL_FILTERED;
call->filter = __alloc_preds();
if (IS_ERR(call->filter))
return PTR_ERR(call->filter);
@@ -625,10 +627,10 @@
int err;
list_for_each_entry(call, &ftrace_events, list) {
- if (!call->define_fields)
+ if (!call->class || !call->class->define_fields)
continue;
- if (strcmp(call->system, system->name) != 0)
+ if (strcmp(call->class->system, system->name) != 0)
continue;
err = init_preds(call);
@@ -644,10 +646,10 @@
struct ftrace_event_call *call;
list_for_each_entry(call, &ftrace_events, list) {
- if (!call->define_fields)
+ if (!call->class || !call->class->define_fields)
continue;
- if (strcmp(call->system, system->name) != 0)
+ if (strcmp(call->class->system, system->name) != 0)
continue;
filter_disable_preds(call);
@@ -1249,10 +1251,10 @@
list_for_each_entry(call, &ftrace_events, list) {
struct event_filter *filter = call->filter;
- if (!call->define_fields)
+ if (!call->class || !call->class->define_fields)
continue;
- if (strcmp(call->system, system->name) != 0)
+ if (strcmp(call->class->system, system->name) != 0)
continue;
/* try to see if the filter can be applied */
@@ -1266,7 +1268,7 @@
if (err)
filter_disable_preds(call);
else {
- call->filter_active = 1;
+ call->flags |= TRACE_EVENT_FL_FILTERED;
replace_filter_string(filter, filter_string);
}
fail = false;
@@ -1315,7 +1317,7 @@
if (err)
append_filter_err(ps, call->filter);
else
- call->filter_active = 1;
+ call->flags |= TRACE_EVENT_FL_FILTERED;
out:
filter_opstack_clear(ps);
postfix_clear(ps);
@@ -1393,7 +1395,7 @@
mutex_lock(&event_mutex);
list_for_each_entry(call, &ftrace_events, list) {
- if (call->id == event_id)
+ if (call->event.type == event_id)
break;
}
diff --git a/kernel/trace/trace_export.c b/kernel/trace/trace_export.c
index e091f64..8536e2a 100644
--- a/kernel/trace/trace_export.c
+++ b/kernel/trace/trace_export.c
@@ -127,7 +127,7 @@
static int ftrace_raw_init_event(struct ftrace_event_call *call)
{
- INIT_LIST_HEAD(&call->fields);
+ INIT_LIST_HEAD(&call->class->fields);
return 0;
}
@@ -153,17 +153,21 @@
#define F_printk(fmt, args...) #fmt ", " __stringify(args)
#undef FTRACE_ENTRY
-#define FTRACE_ENTRY(call, struct_name, type, tstruct, print) \
+#define FTRACE_ENTRY(call, struct_name, etype, tstruct, print) \
+ \
+struct ftrace_event_class event_class_ftrace_##call = { \
+ .system = __stringify(TRACE_SYSTEM), \
+ .define_fields = ftrace_define_fields_##call, \
+ .raw_init = ftrace_raw_init_event, \
+}; \
\
struct ftrace_event_call __used \
__attribute__((__aligned__(4))) \
__attribute__((section("_ftrace_events"))) event_##call = { \
.name = #call, \
- .id = type, \
- .system = __stringify(TRACE_SYSTEM), \
- .raw_init = ftrace_raw_init_event, \
+ .event.type = etype, \
+ .class = &event_class_ftrace_##call, \
.print_fmt = print, \
- .define_fields = ftrace_define_fields_##call, \
}; \
#include "trace_entries.h"
diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c
index dd11c83..79f4bac 100644
--- a/kernel/trace/trace_functions_graph.c
+++ b/kernel/trace/trace_functions_graph.c
@@ -1025,7 +1025,7 @@
if (!event)
return TRACE_TYPE_UNHANDLED;
- ret = event->trace(iter, sym_flags);
+ ret = event->funcs->trace(iter, sym_flags, event);
if (ret != TRACE_TYPE_HANDLED)
return ret;
}
@@ -1112,7 +1112,8 @@
}
static enum print_line_t
-print_graph_function_event(struct trace_iterator *iter, int flags)
+print_graph_function_event(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
return print_graph_function(iter);
}
@@ -1225,14 +1226,18 @@
}
}
+static struct trace_event_functions graph_functions = {
+ .trace = print_graph_function_event,
+};
+
static struct trace_event graph_trace_entry_event = {
.type = TRACE_GRAPH_ENT,
- .trace = print_graph_function_event,
+ .funcs = &graph_functions,
};
static struct trace_event graph_trace_ret_event = {
.type = TRACE_GRAPH_RET,
- .trace = print_graph_function_event,
+ .funcs = &graph_functions
};
static struct tracer graph_trace __read_mostly = {
diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index a751432..f52b5f5 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -324,8 +324,8 @@
unsigned long nhit;
unsigned int flags; /* For TP_FLAG_* */
const char *symbol; /* symbol name */
+ struct ftrace_event_class class;
struct ftrace_event_call call;
- struct trace_event event;
ssize_t size; /* trace entry size */
unsigned int nr_args;
struct probe_arg args[];
@@ -404,6 +404,7 @@
goto error;
}
+ tp->call.class = &tp->class;
tp->call.name = kstrdup(event, GFP_KERNEL);
if (!tp->call.name)
goto error;
@@ -413,8 +414,8 @@
goto error;
}
- tp->call.system = kstrdup(group, GFP_KERNEL);
- if (!tp->call.system)
+ tp->class.system = kstrdup(group, GFP_KERNEL);
+ if (!tp->class.system)
goto error;
INIT_LIST_HEAD(&tp->list);
@@ -443,7 +444,7 @@
for (i = 0; i < tp->nr_args; i++)
free_probe_arg(&tp->args[i]);
- kfree(tp->call.system);
+ kfree(tp->call.class->system);
kfree(tp->call.name);
kfree(tp->symbol);
kfree(tp);
@@ -456,7 +457,7 @@
list_for_each_entry(tp, &probe_list, list)
if (strcmp(tp->call.name, event) == 0 &&
- strcmp(tp->call.system, group) == 0)
+ strcmp(tp->call.class->system, group) == 0)
return tp;
return NULL;
}
@@ -481,7 +482,7 @@
mutex_lock(&probe_lock);
/* register as an event */
- old_tp = find_probe_event(tp->call.name, tp->call.system);
+ old_tp = find_probe_event(tp->call.name, tp->call.class->system);
if (old_tp) {
/* delete old event */
unregister_trace_probe(old_tp);
@@ -904,7 +905,7 @@
int i;
seq_printf(m, "%c", probe_is_return(tp) ? 'r' : 'p');
- seq_printf(m, ":%s/%s", tp->call.system, tp->call.name);
+ seq_printf(m, ":%s/%s", tp->call.class->system, tp->call.name);
if (!tp->symbol)
seq_printf(m, " 0x%p", tp->rp.kp.addr);
@@ -1061,8 +1062,8 @@
size = sizeof(*entry) + tp->size;
- event = trace_current_buffer_lock_reserve(&buffer, call->id, size,
- irq_flags, pc);
+ event = trace_current_buffer_lock_reserve(&buffer, call->event.type,
+ size, irq_flags, pc);
if (!event)
return;
@@ -1094,8 +1095,8 @@
size = sizeof(*entry) + tp->size;
- event = trace_current_buffer_lock_reserve(&buffer, call->id, size,
- irq_flags, pc);
+ event = trace_current_buffer_lock_reserve(&buffer, call->event.type,
+ size, irq_flags, pc);
if (!event)
return;
@@ -1112,18 +1113,17 @@
/* Event entry printers */
enum print_line_t
-print_kprobe_event(struct trace_iterator *iter, int flags)
+print_kprobe_event(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
struct kprobe_trace_entry_head *field;
struct trace_seq *s = &iter->seq;
- struct trace_event *event;
struct trace_probe *tp;
u8 *data;
int i;
field = (struct kprobe_trace_entry_head *)iter->ent;
- event = ftrace_find_event(field->ent.type);
- tp = container_of(event, struct trace_probe, event);
+ tp = container_of(event, struct trace_probe, call.event);
if (!trace_seq_printf(s, "%s: (", tp->call.name))
goto partial;
@@ -1149,18 +1149,17 @@
}
enum print_line_t
-print_kretprobe_event(struct trace_iterator *iter, int flags)
+print_kretprobe_event(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
struct kretprobe_trace_entry_head *field;
struct trace_seq *s = &iter->seq;
- struct trace_event *event;
struct trace_probe *tp;
u8 *data;
int i;
field = (struct kretprobe_trace_entry_head *)iter->ent;
- event = ftrace_find_event(field->ent.type);
- tp = container_of(event, struct trace_probe, event);
+ tp = container_of(event, struct trace_probe, call.event);
if (!trace_seq_printf(s, "%s: (", tp->call.name))
goto partial;
@@ -1217,8 +1216,6 @@
static int probe_event_raw_init(struct ftrace_event_call *event_call)
{
- INIT_LIST_HEAD(&event_call->fields);
-
return 0;
}
@@ -1341,9 +1338,9 @@
struct trace_probe *tp = container_of(kp, struct trace_probe, rp.kp);
struct ftrace_event_call *call = &tp->call;
struct kprobe_trace_entry_head *entry;
+ struct hlist_head *head;
u8 *data;
int size, __size, i;
- unsigned long irq_flags;
int rctx;
__size = sizeof(*entry) + tp->size;
@@ -1353,7 +1350,7 @@
"profile buffer not large enough"))
return;
- entry = perf_trace_buf_prepare(size, call->id, &rctx, &irq_flags);
+ entry = perf_trace_buf_prepare(size, call->event.type, regs, &rctx);
if (!entry)
return;
@@ -1362,7 +1359,8 @@
for (i = 0; i < tp->nr_args; i++)
call_fetch(&tp->args[i].fetch, regs, data + tp->args[i].offset);
- perf_trace_buf_submit(entry, size, rctx, entry->ip, 1, irq_flags, regs);
+ head = this_cpu_ptr(call->perf_events);
+ perf_trace_buf_submit(entry, size, rctx, entry->ip, 1, regs, head);
}
/* Kretprobe profile handler */
@@ -1372,9 +1370,9 @@
struct trace_probe *tp = container_of(ri->rp, struct trace_probe, rp);
struct ftrace_event_call *call = &tp->call;
struct kretprobe_trace_entry_head *entry;
+ struct hlist_head *head;
u8 *data;
int size, __size, i;
- unsigned long irq_flags;
int rctx;
__size = sizeof(*entry) + tp->size;
@@ -1384,7 +1382,7 @@
"profile buffer not large enough"))
return;
- entry = perf_trace_buf_prepare(size, call->id, &rctx, &irq_flags);
+ entry = perf_trace_buf_prepare(size, call->event.type, regs, &rctx);
if (!entry)
return;
@@ -1394,8 +1392,8 @@
for (i = 0; i < tp->nr_args; i++)
call_fetch(&tp->args[i].fetch, regs, data + tp->args[i].offset);
- perf_trace_buf_submit(entry, size, rctx, entry->ret_ip, 1,
- irq_flags, regs);
+ head = this_cpu_ptr(call->perf_events);
+ perf_trace_buf_submit(entry, size, rctx, entry->ret_ip, 1, regs, head);
}
static int probe_perf_enable(struct ftrace_event_call *call)
@@ -1425,6 +1423,26 @@
}
#endif /* CONFIG_PERF_EVENTS */
+static __kprobes
+int kprobe_register(struct ftrace_event_call *event, enum trace_reg type)
+{
+ switch (type) {
+ case TRACE_REG_REGISTER:
+ return probe_event_enable(event);
+ case TRACE_REG_UNREGISTER:
+ probe_event_disable(event);
+ return 0;
+
+#ifdef CONFIG_PERF_EVENTS
+ case TRACE_REG_PERF_REGISTER:
+ return probe_perf_enable(event);
+ case TRACE_REG_PERF_UNREGISTER:
+ probe_perf_disable(event);
+ return 0;
+#endif
+ }
+ return 0;
+}
static __kprobes
int kprobe_dispatcher(struct kprobe *kp, struct pt_regs *regs)
@@ -1454,6 +1472,14 @@
return 0; /* We don't tweek kernel, so just return 0 */
}
+static struct trace_event_functions kretprobe_funcs = {
+ .trace = print_kretprobe_event
+};
+
+static struct trace_event_functions kprobe_funcs = {
+ .trace = print_kprobe_event
+};
+
static int register_probe_event(struct trace_probe *tp)
{
struct ftrace_event_call *call = &tp->call;
@@ -1461,36 +1487,31 @@
/* Initialize ftrace_event_call */
if (probe_is_return(tp)) {
- tp->event.trace = print_kretprobe_event;
- call->raw_init = probe_event_raw_init;
- call->define_fields = kretprobe_event_define_fields;
+ INIT_LIST_HEAD(&call->class->fields);
+ call->event.funcs = &kretprobe_funcs;
+ call->class->raw_init = probe_event_raw_init;
+ call->class->define_fields = kretprobe_event_define_fields;
} else {
- tp->event.trace = print_kprobe_event;
- call->raw_init = probe_event_raw_init;
- call->define_fields = kprobe_event_define_fields;
+ INIT_LIST_HEAD(&call->class->fields);
+ call->event.funcs = &kprobe_funcs;
+ call->class->raw_init = probe_event_raw_init;
+ call->class->define_fields = kprobe_event_define_fields;
}
if (set_print_fmt(tp) < 0)
return -ENOMEM;
- call->event = &tp->event;
- call->id = register_ftrace_event(&tp->event);
- if (!call->id) {
+ ret = register_ftrace_event(&call->event);
+ if (!ret) {
kfree(call->print_fmt);
return -ENODEV;
}
- call->enabled = 0;
- call->regfunc = probe_event_enable;
- call->unregfunc = probe_event_disable;
-
-#ifdef CONFIG_PERF_EVENTS
- call->perf_event_enable = probe_perf_enable;
- call->perf_event_disable = probe_perf_disable;
-#endif
+ call->flags = 0;
+ call->class->reg = kprobe_register;
call->data = tp;
ret = trace_add_event_call(call);
if (ret) {
pr_info("Failed to register kprobe event: %s\n", call->name);
kfree(call->print_fmt);
- unregister_ftrace_event(&tp->event);
+ unregister_ftrace_event(&call->event);
}
return ret;
}
diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c
index ab13d70..57c1b45 100644
--- a/kernel/trace/trace_output.c
+++ b/kernel/trace/trace_output.c
@@ -742,6 +742,9 @@
if (WARN_ON(!event))
goto out;
+ if (WARN_ON(!event->funcs))
+ goto out;
+
INIT_LIST_HEAD(&event->list);
if (!event->type) {
@@ -774,14 +777,14 @@
goto out;
}
- if (event->trace == NULL)
- event->trace = trace_nop_print;
- if (event->raw == NULL)
- event->raw = trace_nop_print;
- if (event->hex == NULL)
- event->hex = trace_nop_print;
- if (event->binary == NULL)
- event->binary = trace_nop_print;
+ if (event->funcs->trace == NULL)
+ event->funcs->trace = trace_nop_print;
+ if (event->funcs->raw == NULL)
+ event->funcs->raw = trace_nop_print;
+ if (event->funcs->hex == NULL)
+ event->funcs->hex = trace_nop_print;
+ if (event->funcs->binary == NULL)
+ event->funcs->binary = trace_nop_print;
key = event->type & (EVENT_HASHSIZE - 1);
@@ -823,13 +826,15 @@
* Standard events
*/
-enum print_line_t trace_nop_print(struct trace_iterator *iter, int flags)
+enum print_line_t trace_nop_print(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
return TRACE_TYPE_HANDLED;
}
/* TRACE_FN */
-static enum print_line_t trace_fn_trace(struct trace_iterator *iter, int flags)
+static enum print_line_t trace_fn_trace(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
struct ftrace_entry *field;
struct trace_seq *s = &iter->seq;
@@ -856,7 +861,8 @@
return TRACE_TYPE_PARTIAL_LINE;
}
-static enum print_line_t trace_fn_raw(struct trace_iterator *iter, int flags)
+static enum print_line_t trace_fn_raw(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
struct ftrace_entry *field;
@@ -870,7 +876,8 @@
return TRACE_TYPE_HANDLED;
}
-static enum print_line_t trace_fn_hex(struct trace_iterator *iter, int flags)
+static enum print_line_t trace_fn_hex(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
struct ftrace_entry *field;
struct trace_seq *s = &iter->seq;
@@ -883,7 +890,8 @@
return TRACE_TYPE_HANDLED;
}
-static enum print_line_t trace_fn_bin(struct trace_iterator *iter, int flags)
+static enum print_line_t trace_fn_bin(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
struct ftrace_entry *field;
struct trace_seq *s = &iter->seq;
@@ -896,14 +904,18 @@
return TRACE_TYPE_HANDLED;
}
-static struct trace_event trace_fn_event = {
- .type = TRACE_FN,
+static struct trace_event_functions trace_fn_funcs = {
.trace = trace_fn_trace,
.raw = trace_fn_raw,
.hex = trace_fn_hex,
.binary = trace_fn_bin,
};
+static struct trace_event trace_fn_event = {
+ .type = TRACE_FN,
+ .funcs = &trace_fn_funcs,
+};
+
/* TRACE_CTX an TRACE_WAKE */
static enum print_line_t trace_ctxwake_print(struct trace_iterator *iter,
char *delim)
@@ -932,13 +944,14 @@
return TRACE_TYPE_HANDLED;
}
-static enum print_line_t trace_ctx_print(struct trace_iterator *iter, int flags)
+static enum print_line_t trace_ctx_print(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
return trace_ctxwake_print(iter, "==>");
}
static enum print_line_t trace_wake_print(struct trace_iterator *iter,
- int flags)
+ int flags, struct trace_event *event)
{
return trace_ctxwake_print(iter, " +");
}
@@ -966,12 +979,14 @@
return TRACE_TYPE_HANDLED;
}
-static enum print_line_t trace_ctx_raw(struct trace_iterator *iter, int flags)
+static enum print_line_t trace_ctx_raw(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
return trace_ctxwake_raw(iter, 0);
}
-static enum print_line_t trace_wake_raw(struct trace_iterator *iter, int flags)
+static enum print_line_t trace_wake_raw(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
return trace_ctxwake_raw(iter, '+');
}
@@ -1000,18 +1015,20 @@
return TRACE_TYPE_HANDLED;
}
-static enum print_line_t trace_ctx_hex(struct trace_iterator *iter, int flags)
+static enum print_line_t trace_ctx_hex(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
return trace_ctxwake_hex(iter, 0);
}
-static enum print_line_t trace_wake_hex(struct trace_iterator *iter, int flags)
+static enum print_line_t trace_wake_hex(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
return trace_ctxwake_hex(iter, '+');
}
static enum print_line_t trace_ctxwake_bin(struct trace_iterator *iter,
- int flags)
+ int flags, struct trace_event *event)
{
struct ctx_switch_entry *field;
struct trace_seq *s = &iter->seq;
@@ -1028,25 +1045,33 @@
return TRACE_TYPE_HANDLED;
}
-static struct trace_event trace_ctx_event = {
- .type = TRACE_CTX,
+static struct trace_event_functions trace_ctx_funcs = {
.trace = trace_ctx_print,
.raw = trace_ctx_raw,
.hex = trace_ctx_hex,
.binary = trace_ctxwake_bin,
};
-static struct trace_event trace_wake_event = {
- .type = TRACE_WAKE,
+static struct trace_event trace_ctx_event = {
+ .type = TRACE_CTX,
+ .funcs = &trace_ctx_funcs,
+};
+
+static struct trace_event_functions trace_wake_funcs = {
.trace = trace_wake_print,
.raw = trace_wake_raw,
.hex = trace_wake_hex,
.binary = trace_ctxwake_bin,
};
+static struct trace_event trace_wake_event = {
+ .type = TRACE_WAKE,
+ .funcs = &trace_wake_funcs,
+};
+
/* TRACE_SPECIAL */
static enum print_line_t trace_special_print(struct trace_iterator *iter,
- int flags)
+ int flags, struct trace_event *event)
{
struct special_entry *field;
@@ -1062,7 +1087,7 @@
}
static enum print_line_t trace_special_hex(struct trace_iterator *iter,
- int flags)
+ int flags, struct trace_event *event)
{
struct special_entry *field;
struct trace_seq *s = &iter->seq;
@@ -1077,7 +1102,7 @@
}
static enum print_line_t trace_special_bin(struct trace_iterator *iter,
- int flags)
+ int flags, struct trace_event *event)
{
struct special_entry *field;
struct trace_seq *s = &iter->seq;
@@ -1091,18 +1116,22 @@
return TRACE_TYPE_HANDLED;
}
-static struct trace_event trace_special_event = {
- .type = TRACE_SPECIAL,
+static struct trace_event_functions trace_special_funcs = {
.trace = trace_special_print,
.raw = trace_special_print,
.hex = trace_special_hex,
.binary = trace_special_bin,
};
+static struct trace_event trace_special_event = {
+ .type = TRACE_SPECIAL,
+ .funcs = &trace_special_funcs,
+};
+
/* TRACE_STACK */
static enum print_line_t trace_stack_print(struct trace_iterator *iter,
- int flags)
+ int flags, struct trace_event *event)
{
struct stack_entry *field;
struct trace_seq *s = &iter->seq;
@@ -1130,17 +1159,21 @@
return TRACE_TYPE_PARTIAL_LINE;
}
-static struct trace_event trace_stack_event = {
- .type = TRACE_STACK,
+static struct trace_event_functions trace_stack_funcs = {
.trace = trace_stack_print,
.raw = trace_special_print,
.hex = trace_special_hex,
.binary = trace_special_bin,
};
+static struct trace_event trace_stack_event = {
+ .type = TRACE_STACK,
+ .funcs = &trace_stack_funcs,
+};
+
/* TRACE_USER_STACK */
static enum print_line_t trace_user_stack_print(struct trace_iterator *iter,
- int flags)
+ int flags, struct trace_event *event)
{
struct userstack_entry *field;
struct trace_seq *s = &iter->seq;
@@ -1159,17 +1192,22 @@
return TRACE_TYPE_PARTIAL_LINE;
}
-static struct trace_event trace_user_stack_event = {
- .type = TRACE_USER_STACK,
+static struct trace_event_functions trace_user_stack_funcs = {
.trace = trace_user_stack_print,
.raw = trace_special_print,
.hex = trace_special_hex,
.binary = trace_special_bin,
};
+static struct trace_event trace_user_stack_event = {
+ .type = TRACE_USER_STACK,
+ .funcs = &trace_user_stack_funcs,
+};
+
/* TRACE_BPRINT */
static enum print_line_t
-trace_bprint_print(struct trace_iterator *iter, int flags)
+trace_bprint_print(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
struct trace_entry *entry = iter->ent;
struct trace_seq *s = &iter->seq;
@@ -1194,7 +1232,8 @@
static enum print_line_t
-trace_bprint_raw(struct trace_iterator *iter, int flags)
+trace_bprint_raw(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
struct bprint_entry *field;
struct trace_seq *s = &iter->seq;
@@ -1213,16 +1252,19 @@
return TRACE_TYPE_PARTIAL_LINE;
}
-
-static struct trace_event trace_bprint_event = {
- .type = TRACE_BPRINT,
+static struct trace_event_functions trace_bprint_funcs = {
.trace = trace_bprint_print,
.raw = trace_bprint_raw,
};
+static struct trace_event trace_bprint_event = {
+ .type = TRACE_BPRINT,
+ .funcs = &trace_bprint_funcs,
+};
+
/* TRACE_PRINT */
static enum print_line_t trace_print_print(struct trace_iterator *iter,
- int flags)
+ int flags, struct trace_event *event)
{
struct print_entry *field;
struct trace_seq *s = &iter->seq;
@@ -1241,7 +1283,8 @@
return TRACE_TYPE_PARTIAL_LINE;
}
-static enum print_line_t trace_print_raw(struct trace_iterator *iter, int flags)
+static enum print_line_t trace_print_raw(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
struct print_entry *field;
@@ -1256,12 +1299,16 @@
return TRACE_TYPE_PARTIAL_LINE;
}
-static struct trace_event trace_print_event = {
- .type = TRACE_PRINT,
+static struct trace_event_functions trace_print_funcs = {
.trace = trace_print_print,
.raw = trace_print_raw,
};
+static struct trace_event trace_print_event = {
+ .type = TRACE_PRINT,
+ .funcs = &trace_print_funcs,
+};
+
static struct trace_event *events[] __initdata = {
&trace_fn_event,
diff --git a/kernel/trace/trace_output.h b/kernel/trace/trace_output.h
index 9d91c72..c038eba 100644
--- a/kernel/trace/trace_output.h
+++ b/kernel/trace/trace_output.h
@@ -25,7 +25,7 @@
extern struct trace_event *ftrace_find_event(int type);
extern enum print_line_t trace_nop_print(struct trace_iterator *iter,
- int flags);
+ int flags, struct trace_event *event);
extern int
trace_print_lat_fmt(struct trace_seq *s, struct trace_entry *entry);
diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c
index a55fccf..8f758d0 100644
--- a/kernel/trace/trace_sched_switch.c
+++ b/kernel/trace/trace_sched_switch.c
@@ -50,7 +50,7 @@
}
static void
-probe_sched_switch(struct task_struct *prev, struct task_struct *next)
+probe_sched_switch(void *ignore, struct task_struct *prev, struct task_struct *next)
{
struct trace_array_cpu *data;
unsigned long flags;
@@ -108,7 +108,7 @@
}
static void
-probe_sched_wakeup(struct task_struct *wakee, int success)
+probe_sched_wakeup(void *ignore, struct task_struct *wakee, int success)
{
struct trace_array_cpu *data;
unsigned long flags;
@@ -138,21 +138,21 @@
{
int ret;
- ret = register_trace_sched_wakeup(probe_sched_wakeup);
+ ret = register_trace_sched_wakeup(probe_sched_wakeup, NULL);
if (ret) {
pr_info("wakeup trace: Couldn't activate tracepoint"
" probe to kernel_sched_wakeup\n");
return ret;
}
- ret = register_trace_sched_wakeup_new(probe_sched_wakeup);
+ ret = register_trace_sched_wakeup_new(probe_sched_wakeup, NULL);
if (ret) {
pr_info("wakeup trace: Couldn't activate tracepoint"
" probe to kernel_sched_wakeup_new\n");
goto fail_deprobe;
}
- ret = register_trace_sched_switch(probe_sched_switch);
+ ret = register_trace_sched_switch(probe_sched_switch, NULL);
if (ret) {
pr_info("sched trace: Couldn't activate tracepoint"
" probe to kernel_sched_switch\n");
@@ -161,17 +161,17 @@
return ret;
fail_deprobe_wake_new:
- unregister_trace_sched_wakeup_new(probe_sched_wakeup);
+ unregister_trace_sched_wakeup_new(probe_sched_wakeup, NULL);
fail_deprobe:
- unregister_trace_sched_wakeup(probe_sched_wakeup);
+ unregister_trace_sched_wakeup(probe_sched_wakeup, NULL);
return ret;
}
static void tracing_sched_unregister(void)
{
- unregister_trace_sched_switch(probe_sched_switch);
- unregister_trace_sched_wakeup_new(probe_sched_wakeup);
- unregister_trace_sched_wakeup(probe_sched_wakeup);
+ unregister_trace_sched_switch(probe_sched_switch, NULL);
+ unregister_trace_sched_wakeup_new(probe_sched_wakeup, NULL);
+ unregister_trace_sched_wakeup(probe_sched_wakeup, NULL);
}
static void tracing_start_sched_switch(void)
diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c
index 8052446..0e73bc2 100644
--- a/kernel/trace/trace_sched_wakeup.c
+++ b/kernel/trace/trace_sched_wakeup.c
@@ -98,7 +98,8 @@
return 1;
}
-static void probe_wakeup_migrate_task(struct task_struct *task, int cpu)
+static void
+probe_wakeup_migrate_task(void *ignore, struct task_struct *task, int cpu)
{
if (task != wakeup_task)
return;
@@ -107,7 +108,8 @@
}
static void notrace
-probe_wakeup_sched_switch(struct task_struct *prev, struct task_struct *next)
+probe_wakeup_sched_switch(void *ignore,
+ struct task_struct *prev, struct task_struct *next)
{
struct trace_array_cpu *data;
cycle_t T0, T1, delta;
@@ -199,7 +201,7 @@
}
static void
-probe_wakeup(struct task_struct *p, int success)
+probe_wakeup(void *ignore, struct task_struct *p, int success)
{
struct trace_array_cpu *data;
int cpu = smp_processor_id();
@@ -263,28 +265,28 @@
{
int ret;
- ret = register_trace_sched_wakeup(probe_wakeup);
+ ret = register_trace_sched_wakeup(probe_wakeup, NULL);
if (ret) {
pr_info("wakeup trace: Couldn't activate tracepoint"
" probe to kernel_sched_wakeup\n");
return;
}
- ret = register_trace_sched_wakeup_new(probe_wakeup);
+ ret = register_trace_sched_wakeup_new(probe_wakeup, NULL);
if (ret) {
pr_info("wakeup trace: Couldn't activate tracepoint"
" probe to kernel_sched_wakeup_new\n");
goto fail_deprobe;
}
- ret = register_trace_sched_switch(probe_wakeup_sched_switch);
+ ret = register_trace_sched_switch(probe_wakeup_sched_switch, NULL);
if (ret) {
pr_info("sched trace: Couldn't activate tracepoint"
" probe to kernel_sched_switch\n");
goto fail_deprobe_wake_new;
}
- ret = register_trace_sched_migrate_task(probe_wakeup_migrate_task);
+ ret = register_trace_sched_migrate_task(probe_wakeup_migrate_task, NULL);
if (ret) {
pr_info("wakeup trace: Couldn't activate tracepoint"
" probe to kernel_sched_migrate_task\n");
@@ -311,19 +313,19 @@
return;
fail_deprobe_wake_new:
- unregister_trace_sched_wakeup_new(probe_wakeup);
+ unregister_trace_sched_wakeup_new(probe_wakeup, NULL);
fail_deprobe:
- unregister_trace_sched_wakeup(probe_wakeup);
+ unregister_trace_sched_wakeup(probe_wakeup, NULL);
}
static void stop_wakeup_tracer(struct trace_array *tr)
{
tracer_enabled = 0;
unregister_ftrace_function(&trace_ops);
- unregister_trace_sched_switch(probe_wakeup_sched_switch);
- unregister_trace_sched_wakeup_new(probe_wakeup);
- unregister_trace_sched_wakeup(probe_wakeup);
- unregister_trace_sched_migrate_task(probe_wakeup_migrate_task);
+ unregister_trace_sched_switch(probe_wakeup_sched_switch, NULL);
+ unregister_trace_sched_wakeup_new(probe_wakeup, NULL);
+ unregister_trace_sched_wakeup(probe_wakeup, NULL);
+ unregister_trace_sched_migrate_task(probe_wakeup_migrate_task, NULL);
}
static int __wakeup_tracer_init(struct trace_array *tr)
diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c
index 4d6d711..34e3580 100644
--- a/kernel/trace/trace_syscalls.c
+++ b/kernel/trace/trace_syscalls.c
@@ -15,6 +15,54 @@
static DECLARE_BITMAP(enabled_enter_syscalls, NR_syscalls);
static DECLARE_BITMAP(enabled_exit_syscalls, NR_syscalls);
+static int syscall_enter_register(struct ftrace_event_call *event,
+ enum trace_reg type);
+static int syscall_exit_register(struct ftrace_event_call *event,
+ enum trace_reg type);
+
+static int syscall_enter_define_fields(struct ftrace_event_call *call);
+static int syscall_exit_define_fields(struct ftrace_event_call *call);
+
+static struct list_head *
+syscall_get_enter_fields(struct ftrace_event_call *call)
+{
+ struct syscall_metadata *entry = call->data;
+
+ return &entry->enter_fields;
+}
+
+static struct list_head *
+syscall_get_exit_fields(struct ftrace_event_call *call)
+{
+ struct syscall_metadata *entry = call->data;
+
+ return &entry->exit_fields;
+}
+
+struct trace_event_functions enter_syscall_print_funcs = {
+ .trace = print_syscall_enter,
+};
+
+struct trace_event_functions exit_syscall_print_funcs = {
+ .trace = print_syscall_exit,
+};
+
+struct ftrace_event_class event_class_syscall_enter = {
+ .system = "syscalls",
+ .reg = syscall_enter_register,
+ .define_fields = syscall_enter_define_fields,
+ .get_fields = syscall_get_enter_fields,
+ .raw_init = init_syscall_trace,
+};
+
+struct ftrace_event_class event_class_syscall_exit = {
+ .system = "syscalls",
+ .reg = syscall_exit_register,
+ .define_fields = syscall_exit_define_fields,
+ .get_fields = syscall_get_exit_fields,
+ .raw_init = init_syscall_trace,
+};
+
extern unsigned long __start_syscalls_metadata[];
extern unsigned long __stop_syscalls_metadata[];
@@ -53,7 +101,8 @@
}
enum print_line_t
-print_syscall_enter(struct trace_iterator *iter, int flags)
+print_syscall_enter(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
struct trace_seq *s = &iter->seq;
struct trace_entry *ent = iter->ent;
@@ -68,7 +117,7 @@
if (!entry)
goto end;
- if (entry->enter_event->id != ent->type) {
+ if (entry->enter_event->event.type != ent->type) {
WARN_ON_ONCE(1);
goto end;
}
@@ -105,7 +154,8 @@
}
enum print_line_t
-print_syscall_exit(struct trace_iterator *iter, int flags)
+print_syscall_exit(struct trace_iterator *iter, int flags,
+ struct trace_event *event)
{
struct trace_seq *s = &iter->seq;
struct trace_entry *ent = iter->ent;
@@ -123,7 +173,7 @@
return TRACE_TYPE_HANDLED;
}
- if (entry->exit_event->id != ent->type) {
+ if (entry->exit_event->event.type != ent->type) {
WARN_ON_ONCE(1);
return TRACE_TYPE_UNHANDLED;
}
@@ -205,7 +255,7 @@
kfree(call->print_fmt);
}
-int syscall_enter_define_fields(struct ftrace_event_call *call)
+static int syscall_enter_define_fields(struct ftrace_event_call *call)
{
struct syscall_trace_enter trace;
struct syscall_metadata *meta = call->data;
@@ -228,7 +278,7 @@
return ret;
}
-int syscall_exit_define_fields(struct ftrace_event_call *call)
+static int syscall_exit_define_fields(struct ftrace_event_call *call)
{
struct syscall_trace_exit trace;
int ret;
@@ -243,7 +293,7 @@
return ret;
}
-void ftrace_syscall_enter(struct pt_regs *regs, long id)
+void ftrace_syscall_enter(void *ignore, struct pt_regs *regs, long id)
{
struct syscall_trace_enter *entry;
struct syscall_metadata *sys_data;
@@ -265,7 +315,7 @@
size = sizeof(*entry) + sizeof(unsigned long) * sys_data->nb_args;
event = trace_current_buffer_lock_reserve(&buffer,
- sys_data->enter_event->id, size, 0, 0);
+ sys_data->enter_event->event.type, size, 0, 0);
if (!event)
return;
@@ -278,7 +328,7 @@
trace_current_buffer_unlock_commit(buffer, event, 0, 0);
}
-void ftrace_syscall_exit(struct pt_regs *regs, long ret)
+void ftrace_syscall_exit(void *ignore, struct pt_regs *regs, long ret)
{
struct syscall_trace_exit *entry;
struct syscall_metadata *sys_data;
@@ -297,7 +347,7 @@
return;
event = trace_current_buffer_lock_reserve(&buffer,
- sys_data->exit_event->id, sizeof(*entry), 0, 0);
+ sys_data->exit_event->event.type, sizeof(*entry), 0, 0);
if (!event)
return;
@@ -320,7 +370,7 @@
return -ENOSYS;
mutex_lock(&syscall_trace_lock);
if (!sys_refcount_enter)
- ret = register_trace_sys_enter(ftrace_syscall_enter);
+ ret = register_trace_sys_enter(ftrace_syscall_enter, NULL);
if (!ret) {
set_bit(num, enabled_enter_syscalls);
sys_refcount_enter++;
@@ -340,7 +390,7 @@
sys_refcount_enter--;
clear_bit(num, enabled_enter_syscalls);
if (!sys_refcount_enter)
- unregister_trace_sys_enter(ftrace_syscall_enter);
+ unregister_trace_sys_enter(ftrace_syscall_enter, NULL);
mutex_unlock(&syscall_trace_lock);
}
@@ -354,7 +404,7 @@
return -ENOSYS;
mutex_lock(&syscall_trace_lock);
if (!sys_refcount_exit)
- ret = register_trace_sys_exit(ftrace_syscall_exit);
+ ret = register_trace_sys_exit(ftrace_syscall_exit, NULL);
if (!ret) {
set_bit(num, enabled_exit_syscalls);
sys_refcount_exit++;
@@ -374,7 +424,7 @@
sys_refcount_exit--;
clear_bit(num, enabled_exit_syscalls);
if (!sys_refcount_exit)
- unregister_trace_sys_exit(ftrace_syscall_exit);
+ unregister_trace_sys_exit(ftrace_syscall_exit, NULL);
mutex_unlock(&syscall_trace_lock);
}
@@ -434,11 +484,11 @@
static int sys_perf_refcount_enter;
static int sys_perf_refcount_exit;
-static void perf_syscall_enter(struct pt_regs *regs, long id)
+static void perf_syscall_enter(void *ignore, struct pt_regs *regs, long id)
{
struct syscall_metadata *sys_data;
struct syscall_trace_enter *rec;
- unsigned long flags;
+ struct hlist_head *head;
int syscall_nr;
int rctx;
int size;
@@ -461,14 +511,16 @@
return;
rec = (struct syscall_trace_enter *)perf_trace_buf_prepare(size,
- sys_data->enter_event->id, &rctx, &flags);
+ sys_data->enter_event->event.type, regs, &rctx);
if (!rec)
return;
rec->nr = syscall_nr;
syscall_get_arguments(current, regs, 0, sys_data->nb_args,
(unsigned long *)&rec->args);
- perf_trace_buf_submit(rec, size, rctx, 0, 1, flags, regs);
+
+ head = this_cpu_ptr(sys_data->enter_event->perf_events);
+ perf_trace_buf_submit(rec, size, rctx, 0, 1, regs, head);
}
int perf_sysenter_enable(struct ftrace_event_call *call)
@@ -480,7 +532,7 @@
mutex_lock(&syscall_trace_lock);
if (!sys_perf_refcount_enter)
- ret = register_trace_sys_enter(perf_syscall_enter);
+ ret = register_trace_sys_enter(perf_syscall_enter, NULL);
if (ret) {
pr_info("event trace: Could not activate"
"syscall entry trace point");
@@ -502,15 +554,15 @@
sys_perf_refcount_enter--;
clear_bit(num, enabled_perf_enter_syscalls);
if (!sys_perf_refcount_enter)
- unregister_trace_sys_enter(perf_syscall_enter);
+ unregister_trace_sys_enter(perf_syscall_enter, NULL);
mutex_unlock(&syscall_trace_lock);
}
-static void perf_syscall_exit(struct pt_regs *regs, long ret)
+static void perf_syscall_exit(void *ignore, struct pt_regs *regs, long ret)
{
struct syscall_metadata *sys_data;
struct syscall_trace_exit *rec;
- unsigned long flags;
+ struct hlist_head *head;
int syscall_nr;
int rctx;
int size;
@@ -536,14 +588,15 @@
return;
rec = (struct syscall_trace_exit *)perf_trace_buf_prepare(size,
- sys_data->exit_event->id, &rctx, &flags);
+ sys_data->exit_event->event.type, regs, &rctx);
if (!rec)
return;
rec->nr = syscall_nr;
rec->ret = syscall_get_return_value(current, regs);
- perf_trace_buf_submit(rec, size, rctx, 0, 1, flags, regs);
+ head = this_cpu_ptr(sys_data->exit_event->perf_events);
+ perf_trace_buf_submit(rec, size, rctx, 0, 1, regs, head);
}
int perf_sysexit_enable(struct ftrace_event_call *call)
@@ -555,7 +608,7 @@
mutex_lock(&syscall_trace_lock);
if (!sys_perf_refcount_exit)
- ret = register_trace_sys_exit(perf_syscall_exit);
+ ret = register_trace_sys_exit(perf_syscall_exit, NULL);
if (ret) {
pr_info("event trace: Could not activate"
"syscall exit trace point");
@@ -577,9 +630,50 @@
sys_perf_refcount_exit--;
clear_bit(num, enabled_perf_exit_syscalls);
if (!sys_perf_refcount_exit)
- unregister_trace_sys_exit(perf_syscall_exit);
+ unregister_trace_sys_exit(perf_syscall_exit, NULL);
mutex_unlock(&syscall_trace_lock);
}
#endif /* CONFIG_PERF_EVENTS */
+static int syscall_enter_register(struct ftrace_event_call *event,
+ enum trace_reg type)
+{
+ switch (type) {
+ case TRACE_REG_REGISTER:
+ return reg_event_syscall_enter(event);
+ case TRACE_REG_UNREGISTER:
+ unreg_event_syscall_enter(event);
+ return 0;
+
+#ifdef CONFIG_PERF_EVENTS
+ case TRACE_REG_PERF_REGISTER:
+ return perf_sysenter_enable(event);
+ case TRACE_REG_PERF_UNREGISTER:
+ perf_sysenter_disable(event);
+ return 0;
+#endif
+ }
+ return 0;
+}
+
+static int syscall_exit_register(struct ftrace_event_call *event,
+ enum trace_reg type)
+{
+ switch (type) {
+ case TRACE_REG_REGISTER:
+ return reg_event_syscall_exit(event);
+ case TRACE_REG_UNREGISTER:
+ unreg_event_syscall_exit(event);
+ return 0;
+
+#ifdef CONFIG_PERF_EVENTS
+ case TRACE_REG_PERF_REGISTER:
+ return perf_sysexit_enable(event);
+ case TRACE_REG_PERF_UNREGISTER:
+ perf_sysexit_disable(event);
+ return 0;
+#endif
+ }
+ return 0;
+}
diff --git a/kernel/trace/trace_workqueue.c b/kernel/trace/trace_workqueue.c
index cc2d2fa..a7cc379 100644
--- a/kernel/trace/trace_workqueue.c
+++ b/kernel/trace/trace_workqueue.c
@@ -49,7 +49,8 @@
/* Insertion of a work */
static void
-probe_workqueue_insertion(struct task_struct *wq_thread,
+probe_workqueue_insertion(void *ignore,
+ struct task_struct *wq_thread,
struct work_struct *work)
{
int cpu = cpumask_first(&wq_thread->cpus_allowed);
@@ -70,7 +71,8 @@
/* Execution of a work */
static void
-probe_workqueue_execution(struct task_struct *wq_thread,
+probe_workqueue_execution(void *ignore,
+ struct task_struct *wq_thread,
struct work_struct *work)
{
int cpu = cpumask_first(&wq_thread->cpus_allowed);
@@ -90,7 +92,8 @@
}
/* Creation of a cpu workqueue thread */
-static void probe_workqueue_creation(struct task_struct *wq_thread, int cpu)
+static void probe_workqueue_creation(void *ignore,
+ struct task_struct *wq_thread, int cpu)
{
struct cpu_workqueue_stats *cws;
unsigned long flags;
@@ -114,7 +117,8 @@
}
/* Destruction of a cpu workqueue thread */
-static void probe_workqueue_destruction(struct task_struct *wq_thread)
+static void
+probe_workqueue_destruction(void *ignore, struct task_struct *wq_thread)
{
/* Workqueue only execute on one cpu */
int cpu = cpumask_first(&wq_thread->cpus_allowed);
@@ -259,19 +263,19 @@
{
int ret, cpu;
- ret = register_trace_workqueue_insertion(probe_workqueue_insertion);
+ ret = register_trace_workqueue_insertion(probe_workqueue_insertion, NULL);
if (ret)
goto out;
- ret = register_trace_workqueue_execution(probe_workqueue_execution);
+ ret = register_trace_workqueue_execution(probe_workqueue_execution, NULL);
if (ret)
goto no_insertion;
- ret = register_trace_workqueue_creation(probe_workqueue_creation);
+ ret = register_trace_workqueue_creation(probe_workqueue_creation, NULL);
if (ret)
goto no_execution;
- ret = register_trace_workqueue_destruction(probe_workqueue_destruction);
+ ret = register_trace_workqueue_destruction(probe_workqueue_destruction, NULL);
if (ret)
goto no_creation;
@@ -283,11 +287,11 @@
return 0;
no_creation:
- unregister_trace_workqueue_creation(probe_workqueue_creation);
+ unregister_trace_workqueue_creation(probe_workqueue_creation, NULL);
no_execution:
- unregister_trace_workqueue_execution(probe_workqueue_execution);
+ unregister_trace_workqueue_execution(probe_workqueue_execution, NULL);
no_insertion:
- unregister_trace_workqueue_insertion(probe_workqueue_insertion);
+ unregister_trace_workqueue_insertion(probe_workqueue_insertion, NULL);
out:
pr_warning("trace_workqueue: unable to trace workqueues\n");
diff --git a/kernel/tracepoint.c b/kernel/tracepoint.c
index cc89be5..c77f3ec 100644
--- a/kernel/tracepoint.c
+++ b/kernel/tracepoint.c
@@ -54,7 +54,7 @@
*/
struct tracepoint_entry {
struct hlist_node hlist;
- void **funcs;
+ struct tracepoint_func *funcs;
int refcount; /* Number of times armed. 0 if disarmed. */
char name[0];
};
@@ -64,12 +64,12 @@
struct rcu_head rcu;
struct list_head list;
} u;
- void *probes[0];
+ struct tracepoint_func probes[0];
};
static inline void *allocate_probes(int count)
{
- struct tp_probes *p = kmalloc(count * sizeof(void *)
+ struct tp_probes *p = kmalloc(count * sizeof(struct tracepoint_func)
+ sizeof(struct tp_probes), GFP_KERNEL);
return p == NULL ? NULL : p->probes;
}
@@ -79,7 +79,7 @@
kfree(container_of(head, struct tp_probes, u.rcu));
}
-static inline void release_probes(void *old)
+static inline void release_probes(struct tracepoint_func *old)
{
if (old) {
struct tp_probes *tp_probes = container_of(old,
@@ -95,15 +95,16 @@
if (!tracepoint_debug || !entry->funcs)
return;
- for (i = 0; entry->funcs[i]; i++)
- printk(KERN_DEBUG "Probe %d : %p\n", i, entry->funcs[i]);
+ for (i = 0; entry->funcs[i].func; i++)
+ printk(KERN_DEBUG "Probe %d : %p\n", i, entry->funcs[i].func);
}
-static void *
-tracepoint_entry_add_probe(struct tracepoint_entry *entry, void *probe)
+static struct tracepoint_func *
+tracepoint_entry_add_probe(struct tracepoint_entry *entry,
+ void *probe, void *data)
{
int nr_probes = 0;
- void **old, **new;
+ struct tracepoint_func *old, *new;
WARN_ON(!probe);
@@ -111,8 +112,9 @@
old = entry->funcs;
if (old) {
/* (N -> N+1), (N != 0, 1) probes */
- for (nr_probes = 0; old[nr_probes]; nr_probes++)
- if (old[nr_probes] == probe)
+ for (nr_probes = 0; old[nr_probes].func; nr_probes++)
+ if (old[nr_probes].func == probe &&
+ old[nr_probes].data == data)
return ERR_PTR(-EEXIST);
}
/* + 2 : one for new probe, one for NULL func */
@@ -120,9 +122,10 @@
if (new == NULL)
return ERR_PTR(-ENOMEM);
if (old)
- memcpy(new, old, nr_probes * sizeof(void *));
- new[nr_probes] = probe;
- new[nr_probes + 1] = NULL;
+ memcpy(new, old, nr_probes * sizeof(struct tracepoint_func));
+ new[nr_probes].func = probe;
+ new[nr_probes].data = data;
+ new[nr_probes + 1].func = NULL;
entry->refcount = nr_probes + 1;
entry->funcs = new;
debug_print_probes(entry);
@@ -130,10 +133,11 @@
}
static void *
-tracepoint_entry_remove_probe(struct tracepoint_entry *entry, void *probe)
+tracepoint_entry_remove_probe(struct tracepoint_entry *entry,
+ void *probe, void *data)
{
int nr_probes = 0, nr_del = 0, i;
- void **old, **new;
+ struct tracepoint_func *old, *new;
old = entry->funcs;
@@ -142,8 +146,10 @@
debug_print_probes(entry);
/* (N -> M), (N > 1, M >= 0) probes */
- for (nr_probes = 0; old[nr_probes]; nr_probes++) {
- if ((!probe || old[nr_probes] == probe))
+ for (nr_probes = 0; old[nr_probes].func; nr_probes++) {
+ if (!probe ||
+ (old[nr_probes].func == probe &&
+ old[nr_probes].data == data))
nr_del++;
}
@@ -160,10 +166,11 @@
new = allocate_probes(nr_probes - nr_del + 1);
if (new == NULL)
return ERR_PTR(-ENOMEM);
- for (i = 0; old[i]; i++)
- if ((probe && old[i] != probe))
+ for (i = 0; old[i].func; i++)
+ if (probe &&
+ (old[i].func != probe || old[i].data != data))
new[j++] = old[i];
- new[nr_probes - nr_del] = NULL;
+ new[nr_probes - nr_del].func = NULL;
entry->refcount = nr_probes - nr_del;
entry->funcs = new;
}
@@ -315,18 +322,19 @@
module_update_tracepoints();
}
-static void *tracepoint_add_probe(const char *name, void *probe)
+static struct tracepoint_func *
+tracepoint_add_probe(const char *name, void *probe, void *data)
{
struct tracepoint_entry *entry;
- void *old;
+ struct tracepoint_func *old;
entry = get_tracepoint(name);
if (!entry) {
entry = add_tracepoint(name);
if (IS_ERR(entry))
- return entry;
+ return (struct tracepoint_func *)entry;
}
- old = tracepoint_entry_add_probe(entry, probe);
+ old = tracepoint_entry_add_probe(entry, probe, data);
if (IS_ERR(old) && !entry->refcount)
remove_tracepoint(entry);
return old;
@@ -340,12 +348,12 @@
* Returns 0 if ok, error value on error.
* The probe address must at least be aligned on the architecture pointer size.
*/
-int tracepoint_probe_register(const char *name, void *probe)
+int tracepoint_probe_register(const char *name, void *probe, void *data)
{
- void *old;
+ struct tracepoint_func *old;
mutex_lock(&tracepoints_mutex);
- old = tracepoint_add_probe(name, probe);
+ old = tracepoint_add_probe(name, probe, data);
mutex_unlock(&tracepoints_mutex);
if (IS_ERR(old))
return PTR_ERR(old);
@@ -356,15 +364,16 @@
}
EXPORT_SYMBOL_GPL(tracepoint_probe_register);
-static void *tracepoint_remove_probe(const char *name, void *probe)
+static struct tracepoint_func *
+tracepoint_remove_probe(const char *name, void *probe, void *data)
{
struct tracepoint_entry *entry;
- void *old;
+ struct tracepoint_func *old;
entry = get_tracepoint(name);
if (!entry)
return ERR_PTR(-ENOENT);
- old = tracepoint_entry_remove_probe(entry, probe);
+ old = tracepoint_entry_remove_probe(entry, probe, data);
if (IS_ERR(old))
return old;
if (!entry->refcount)
@@ -382,12 +391,12 @@
* itself uses stop_machine(), which insures that every preempt disabled section
* have finished.
*/
-int tracepoint_probe_unregister(const char *name, void *probe)
+int tracepoint_probe_unregister(const char *name, void *probe, void *data)
{
- void *old;
+ struct tracepoint_func *old;
mutex_lock(&tracepoints_mutex);
- old = tracepoint_remove_probe(name, probe);
+ old = tracepoint_remove_probe(name, probe, data);
mutex_unlock(&tracepoints_mutex);
if (IS_ERR(old))
return PTR_ERR(old);
@@ -418,12 +427,13 @@
*
* caller must call tracepoint_probe_update_all()
*/
-int tracepoint_probe_register_noupdate(const char *name, void *probe)
+int tracepoint_probe_register_noupdate(const char *name, void *probe,
+ void *data)
{
- void *old;
+ struct tracepoint_func *old;
mutex_lock(&tracepoints_mutex);
- old = tracepoint_add_probe(name, probe);
+ old = tracepoint_add_probe(name, probe, data);
if (IS_ERR(old)) {
mutex_unlock(&tracepoints_mutex);
return PTR_ERR(old);
@@ -441,12 +451,13 @@
*
* caller must call tracepoint_probe_update_all()
*/
-int tracepoint_probe_unregister_noupdate(const char *name, void *probe)
+int tracepoint_probe_unregister_noupdate(const char *name, void *probe,
+ void *data)
{
- void *old;
+ struct tracepoint_func *old;
mutex_lock(&tracepoints_mutex);
- old = tracepoint_remove_probe(name, probe);
+ old = tracepoint_remove_probe(name, probe, data);
if (IS_ERR(old)) {
mutex_unlock(&tracepoints_mutex);
return PTR_ERR(old);
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 77dabbf..327d2de 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -1110,7 +1110,7 @@
unsigned int cpu = (unsigned long)hcpu;
struct cpu_workqueue_struct *cwq;
struct workqueue_struct *wq;
- int ret = NOTIFY_OK;
+ int err = 0;
action &= ~CPU_TASKS_FROZEN;
@@ -1124,12 +1124,13 @@
switch (action) {
case CPU_UP_PREPARE:
- if (!create_workqueue_thread(cwq, cpu))
+ err = create_workqueue_thread(cwq, cpu);
+ if (!err)
break;
printk(KERN_ERR "workqueue [%s] for %i failed\n",
wq->name, cpu);
action = CPU_UP_CANCELED;
- ret = NOTIFY_BAD;
+ err = -ENOMEM;
goto undo;
case CPU_ONLINE:
@@ -1150,7 +1151,7 @@
cpumask_clear_cpu(cpu, cpu_populated_map);
}
- return ret;
+ return notifier_from_errno(err);
}
#ifdef CONFIG_SMP
diff --git a/lib/Kconfig b/lib/Kconfig
index 170d8ca..5b916bc 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -181,9 +181,6 @@
config CHECK_SIGNATURE
bool
-config HAVE_LMB
- boolean
-
config CPUMASK_OFFSTACK
bool "Force CPU masks off stack" if DEBUG_PER_CPU_MAPS
help
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 2312089..e722e9d 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -898,6 +898,18 @@
Documentation on how to use the module can be found in
Documentation/fault-injection/provoke-crashes.txt
+config CPU_NOTIFIER_ERROR_INJECT
+ tristate "CPU notifier error injection module"
+ depends on HOTPLUG_CPU && DEBUG_KERNEL
+ help
+ This option provides a kernel module that can be used to test
+ the error handling of the cpu notifiers
+
+ To compile this code as a module, choose M here: the module will
+ be called cpu-notifier-error-inject.
+
+ If unsure, say N.
+
config FAULT_INJECTION
bool "Fault-injection framework"
depends on DEBUG_KERNEL
diff --git a/lib/Makefile b/lib/Makefile
index 9e6d3c2..0bfabba 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -21,7 +21,7 @@
obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \
bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \
- string_helpers.o gcd.o lcm.o list_sort.o
+ string_helpers.o gcd.o lcm.o list_sort.o uuid.o
ifeq ($(CONFIG_DEBUG_KOBJECT),y)
CFLAGS_kobject.o += -DDEBUG
@@ -85,11 +85,10 @@
obj-$(CONFIG_SWIOTLB) += swiotlb.o
obj-$(CONFIG_IOMMU_HELPER) += iommu-helper.o
obj-$(CONFIG_FAULT_INJECTION) += fault-inject.o
+obj-$(CONFIG_CPU_NOTIFIER_ERROR_INJECT) += cpu-notifier-error-inject.o
lib-$(CONFIG_GENERIC_BUG) += bug.o
-obj-$(CONFIG_HAVE_LMB) += lmb.o
-
obj-$(CONFIG_HAVE_ARCH_TRACEHOOK) += syscall.o
obj-$(CONFIG_DYNAMIC_DEBUG) += dynamic_debug.o
diff --git a/lib/atomic64_test.c b/lib/atomic64_test.c
index 65e482c..250ed11 100644
--- a/lib/atomic64_test.c
+++ b/lib/atomic64_test.c
@@ -9,6 +9,7 @@
* (at your option) any later version.
*/
#include <linux/init.h>
+#include <linux/kernel.h>
#include <asm/atomic.h>
#define INIT(c) do { atomic64_set(&v, c); r = c; } while (0)
@@ -112,7 +113,8 @@
r += one;
BUG_ON(v.counter != r);
-#if defined(CONFIG_X86) || defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(_ASM_GENERIC_ATOMIC64_H)
+#if defined(CONFIG_X86) || defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \
+ defined(CONFIG_S390) || defined(_ASM_GENERIC_ATOMIC64_H)
INIT(onestwos);
BUG_ON(atomic64_dec_if_positive(&v) != (onestwos - 1));
r -= one;
diff --git a/lib/cpu-notifier-error-inject.c b/lib/cpu-notifier-error-inject.c
new file mode 100644
index 0000000..4dc2032
--- /dev/null
+++ b/lib/cpu-notifier-error-inject.c
@@ -0,0 +1,63 @@
+#include <linux/kernel.h>
+#include <linux/cpu.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+
+static int priority;
+static int cpu_up_prepare_error;
+static int cpu_down_prepare_error;
+
+module_param(priority, int, 0);
+MODULE_PARM_DESC(priority, "specify cpu notifier priority");
+
+module_param(cpu_up_prepare_error, int, 0644);
+MODULE_PARM_DESC(cpu_up_prepare_error,
+ "specify error code to inject CPU_UP_PREPARE action");
+
+module_param(cpu_down_prepare_error, int, 0644);
+MODULE_PARM_DESC(cpu_down_prepare_error,
+ "specify error code to inject CPU_DOWN_PREPARE action");
+
+static int err_inject_cpu_callback(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ int err = 0;
+
+ switch (action) {
+ case CPU_UP_PREPARE:
+ case CPU_UP_PREPARE_FROZEN:
+ err = cpu_up_prepare_error;
+ break;
+ case CPU_DOWN_PREPARE:
+ case CPU_DOWN_PREPARE_FROZEN:
+ err = cpu_down_prepare_error;
+ break;
+ }
+ if (err)
+ printk(KERN_INFO "Injecting error (%d) at cpu notifier\n", err);
+
+ return notifier_from_errno(err);
+}
+
+static struct notifier_block err_inject_cpu_notifier = {
+ .notifier_call = err_inject_cpu_callback,
+};
+
+static int err_inject_init(void)
+{
+ err_inject_cpu_notifier.priority = priority;
+
+ return register_hotcpu_notifier(&err_inject_cpu_notifier);
+}
+
+static void err_inject_exit(void)
+{
+ unregister_hotcpu_notifier(&err_inject_cpu_notifier);
+}
+
+module_init(err_inject_init);
+module_exit(err_inject_exit);
+
+MODULE_DESCRIPTION("CPU notifier error injection module");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>");
diff --git a/lib/crc32.c b/lib/crc32.c
index 3087ed8..4855995 100644
--- a/lib/crc32.c
+++ b/lib/crc32.c
@@ -50,7 +50,7 @@
static inline u32
crc32_body(u32 crc, unsigned char const *buf, size_t len, const u32 (*tab)[256])
{
-# if __BYTE_ORDER == __LITTLE_ENDIAN
+# ifdef __LITTLE_ENDIAN
# define DO_CRC(x) crc = tab[0][(crc ^ (x)) & 255] ^ (crc >> 8)
# define DO_CRC4 crc = tab[3][(crc) & 255] ^ \
tab[2][(crc >> 8) & 255] ^ \
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 3df8eb1..02afc25 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -692,7 +692,7 @@
* Called in response to a module being unloaded. Removes
* any ddebug_table's which point at the module.
*/
-int ddebug_remove_module(char *mod_name)
+int ddebug_remove_module(const char *mod_name)
{
struct ddebug_table *dt, *nextdt;
int ret = -ENOENT;
diff --git a/lib/genalloc.c b/lib/genalloc.c
index 736c3b0..1923f14 100644
--- a/lib/genalloc.c
+++ b/lib/genalloc.c
@@ -128,7 +128,6 @@
chunk = list_entry(_chunk, struct gen_pool_chunk, next_chunk);
end_bit = (chunk->end_addr - chunk->start_addr) >> order;
- end_bit -= nbits + 1;
spin_lock_irqsave(&chunk->lock, flags);
start_bit = bitmap_find_next_zero_area(chunk->bits, end_bit, 0,
diff --git a/lib/idr.c b/lib/idr.c
index 422a9d5..7f1a4f0 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -445,6 +445,7 @@
void idr_remove_all(struct idr *idp)
{
int n, id, max;
+ int bt_mask;
struct idr_layer *p;
struct idr_layer *pa[MAX_LEVEL];
struct idr_layer **paa = &pa[0];
@@ -462,8 +463,10 @@
p = p->ary[(id >> n) & IDR_MASK];
}
+ bt_mask = id;
id += 1 << n;
- while (n < fls(id)) {
+ /* Get the highest bit that the above add changed from 0->1. */
+ while (n < fls(id ^ bt_mask)) {
if (p)
free_layer(p);
n += IDR_BITS;
@@ -599,7 +602,7 @@
/* find first ent */
n = idp->layers * IDR_BITS;
max = 1 << n;
- p = rcu_dereference(idp->top);
+ p = rcu_dereference_raw(idp->top);
if (!p)
return NULL;
@@ -607,7 +610,7 @@
while (n > 0 && p) {
n -= IDR_BITS;
*paa++ = p;
- p = rcu_dereference(p->ary[(id >> n) & IDR_MASK]);
+ p = rcu_dereference_raw(p->ary[(id >> n) & IDR_MASK]);
}
if (p) {
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index 59c1551..b935795 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -83,6 +83,7 @@
return ret;
}
+#ifdef CONFIG_NET
static int kobj_bcast_filter(struct sock *dsk, struct sk_buff *skb, void *data)
{
struct kobject *kobj = data;
@@ -98,6 +99,7 @@
return 0;
}
+#endif
static int kobj_usermode_filter(struct kobject *kobj)
{
@@ -378,6 +380,7 @@
if (!ue_sk->sk) {
printk(KERN_ERR
"kobject_uevent: unable to create netlink socket!\n");
+ kfree(ue_sk);
return -ENODEV;
}
mutex_lock(&uevent_sock_mutex);
diff --git a/lib/lmb.c b/lib/lmb.c
deleted file mode 100644
index b1fc526..0000000
--- a/lib/lmb.c
+++ /dev/null
@@ -1,541 +0,0 @@
-/*
- * Procedures for maintaining information about logical memory blocks.
- *
- * Peter Bergner, IBM Corp. June 2001.
- * Copyright (C) 2001 Peter Bergner.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/lmb.h>
-
-#define LMB_ALLOC_ANYWHERE 0
-
-struct lmb lmb;
-
-static int lmb_debug;
-
-static int __init early_lmb(char *p)
-{
- if (p && strstr(p, "debug"))
- lmb_debug = 1;
- return 0;
-}
-early_param("lmb", early_lmb);
-
-static void lmb_dump(struct lmb_region *region, char *name)
-{
- unsigned long long base, size;
- int i;
-
- pr_info(" %s.cnt = 0x%lx\n", name, region->cnt);
-
- for (i = 0; i < region->cnt; i++) {
- base = region->region[i].base;
- size = region->region[i].size;
-
- pr_info(" %s[0x%x]\t0x%016llx - 0x%016llx, 0x%llx bytes\n",
- name, i, base, base + size - 1, size);
- }
-}
-
-void lmb_dump_all(void)
-{
- if (!lmb_debug)
- return;
-
- pr_info("LMB configuration:\n");
- pr_info(" rmo_size = 0x%llx\n", (unsigned long long)lmb.rmo_size);
- pr_info(" memory.size = 0x%llx\n", (unsigned long long)lmb.memory.size);
-
- lmb_dump(&lmb.memory, "memory");
- lmb_dump(&lmb.reserved, "reserved");
-}
-
-static unsigned long lmb_addrs_overlap(u64 base1, u64 size1, u64 base2,
- u64 size2)
-{
- return ((base1 < (base2 + size2)) && (base2 < (base1 + size1)));
-}
-
-static long lmb_addrs_adjacent(u64 base1, u64 size1, u64 base2, u64 size2)
-{
- if (base2 == base1 + size1)
- return 1;
- else if (base1 == base2 + size2)
- return -1;
-
- return 0;
-}
-
-static long lmb_regions_adjacent(struct lmb_region *rgn,
- unsigned long r1, unsigned long r2)
-{
- u64 base1 = rgn->region[r1].base;
- u64 size1 = rgn->region[r1].size;
- u64 base2 = rgn->region[r2].base;
- u64 size2 = rgn->region[r2].size;
-
- return lmb_addrs_adjacent(base1, size1, base2, size2);
-}
-
-static void lmb_remove_region(struct lmb_region *rgn, unsigned long r)
-{
- unsigned long i;
-
- for (i = r; i < rgn->cnt - 1; i++) {
- rgn->region[i].base = rgn->region[i + 1].base;
- rgn->region[i].size = rgn->region[i + 1].size;
- }
- rgn->cnt--;
-}
-
-/* Assumption: base addr of region 1 < base addr of region 2 */
-static void lmb_coalesce_regions(struct lmb_region *rgn,
- unsigned long r1, unsigned long r2)
-{
- rgn->region[r1].size += rgn->region[r2].size;
- lmb_remove_region(rgn, r2);
-}
-
-void __init lmb_init(void)
-{
- /* Create a dummy zero size LMB which will get coalesced away later.
- * This simplifies the lmb_add() code below...
- */
- lmb.memory.region[0].base = 0;
- lmb.memory.region[0].size = 0;
- lmb.memory.cnt = 1;
-
- /* Ditto. */
- lmb.reserved.region[0].base = 0;
- lmb.reserved.region[0].size = 0;
- lmb.reserved.cnt = 1;
-}
-
-void __init lmb_analyze(void)
-{
- int i;
-
- lmb.memory.size = 0;
-
- for (i = 0; i < lmb.memory.cnt; i++)
- lmb.memory.size += lmb.memory.region[i].size;
-}
-
-static long lmb_add_region(struct lmb_region *rgn, u64 base, u64 size)
-{
- unsigned long coalesced = 0;
- long adjacent, i;
-
- if ((rgn->cnt == 1) && (rgn->region[0].size == 0)) {
- rgn->region[0].base = base;
- rgn->region[0].size = size;
- return 0;
- }
-
- /* First try and coalesce this LMB with another. */
- for (i = 0; i < rgn->cnt; i++) {
- u64 rgnbase = rgn->region[i].base;
- u64 rgnsize = rgn->region[i].size;
-
- if ((rgnbase == base) && (rgnsize == size))
- /* Already have this region, so we're done */
- return 0;
-
- adjacent = lmb_addrs_adjacent(base, size, rgnbase, rgnsize);
- if (adjacent > 0) {
- rgn->region[i].base -= size;
- rgn->region[i].size += size;
- coalesced++;
- break;
- } else if (adjacent < 0) {
- rgn->region[i].size += size;
- coalesced++;
- break;
- }
- }
-
- if ((i < rgn->cnt - 1) && lmb_regions_adjacent(rgn, i, i+1)) {
- lmb_coalesce_regions(rgn, i, i+1);
- coalesced++;
- }
-
- if (coalesced)
- return coalesced;
- if (rgn->cnt >= MAX_LMB_REGIONS)
- return -1;
-
- /* Couldn't coalesce the LMB, so add it to the sorted table. */
- for (i = rgn->cnt - 1; i >= 0; i--) {
- if (base < rgn->region[i].base) {
- rgn->region[i+1].base = rgn->region[i].base;
- rgn->region[i+1].size = rgn->region[i].size;
- } else {
- rgn->region[i+1].base = base;
- rgn->region[i+1].size = size;
- break;
- }
- }
-
- if (base < rgn->region[0].base) {
- rgn->region[0].base = base;
- rgn->region[0].size = size;
- }
- rgn->cnt++;
-
- return 0;
-}
-
-long lmb_add(u64 base, u64 size)
-{
- struct lmb_region *_rgn = &lmb.memory;
-
- /* On pSeries LPAR systems, the first LMB is our RMO region. */
- if (base == 0)
- lmb.rmo_size = size;
-
- return lmb_add_region(_rgn, base, size);
-
-}
-
-static long __lmb_remove(struct lmb_region *rgn, u64 base, u64 size)
-{
- u64 rgnbegin, rgnend;
- u64 end = base + size;
- int i;
-
- rgnbegin = rgnend = 0; /* supress gcc warnings */
-
- /* Find the region where (base, size) belongs to */
- for (i=0; i < rgn->cnt; i++) {
- rgnbegin = rgn->region[i].base;
- rgnend = rgnbegin + rgn->region[i].size;
-
- if ((rgnbegin <= base) && (end <= rgnend))
- break;
- }
-
- /* Didn't find the region */
- if (i == rgn->cnt)
- return -1;
-
- /* Check to see if we are removing entire region */
- if ((rgnbegin == base) && (rgnend == end)) {
- lmb_remove_region(rgn, i);
- return 0;
- }
-
- /* Check to see if region is matching at the front */
- if (rgnbegin == base) {
- rgn->region[i].base = end;
- rgn->region[i].size -= size;
- return 0;
- }
-
- /* Check to see if the region is matching at the end */
- if (rgnend == end) {
- rgn->region[i].size -= size;
- return 0;
- }
-
- /*
- * We need to split the entry - adjust the current one to the
- * beginging of the hole and add the region after hole.
- */
- rgn->region[i].size = base - rgn->region[i].base;
- return lmb_add_region(rgn, end, rgnend - end);
-}
-
-long lmb_remove(u64 base, u64 size)
-{
- return __lmb_remove(&lmb.memory, base, size);
-}
-
-long __init lmb_free(u64 base, u64 size)
-{
- return __lmb_remove(&lmb.reserved, base, size);
-}
-
-long __init lmb_reserve(u64 base, u64 size)
-{
- struct lmb_region *_rgn = &lmb.reserved;
-
- BUG_ON(0 == size);
-
- return lmb_add_region(_rgn, base, size);
-}
-
-long lmb_overlaps_region(struct lmb_region *rgn, u64 base, u64 size)
-{
- unsigned long i;
-
- for (i = 0; i < rgn->cnt; i++) {
- u64 rgnbase = rgn->region[i].base;
- u64 rgnsize = rgn->region[i].size;
- if (lmb_addrs_overlap(base, size, rgnbase, rgnsize))
- break;
- }
-
- return (i < rgn->cnt) ? i : -1;
-}
-
-static u64 lmb_align_down(u64 addr, u64 size)
-{
- return addr & ~(size - 1);
-}
-
-static u64 lmb_align_up(u64 addr, u64 size)
-{
- return (addr + (size - 1)) & ~(size - 1);
-}
-
-static u64 __init lmb_alloc_nid_unreserved(u64 start, u64 end,
- u64 size, u64 align)
-{
- u64 base, res_base;
- long j;
-
- base = lmb_align_down((end - size), align);
- while (start <= base) {
- j = lmb_overlaps_region(&lmb.reserved, base, size);
- if (j < 0) {
- /* this area isn't reserved, take it */
- if (lmb_add_region(&lmb.reserved, base, size) < 0)
- base = ~(u64)0;
- return base;
- }
- res_base = lmb.reserved.region[j].base;
- if (res_base < size)
- break;
- base = lmb_align_down(res_base - size, align);
- }
-
- return ~(u64)0;
-}
-
-static u64 __init lmb_alloc_nid_region(struct lmb_property *mp,
- u64 (*nid_range)(u64, u64, int *),
- u64 size, u64 align, int nid)
-{
- u64 start, end;
-
- start = mp->base;
- end = start + mp->size;
-
- start = lmb_align_up(start, align);
- while (start < end) {
- u64 this_end;
- int this_nid;
-
- this_end = nid_range(start, end, &this_nid);
- if (this_nid == nid) {
- u64 ret = lmb_alloc_nid_unreserved(start, this_end,
- size, align);
- if (ret != ~(u64)0)
- return ret;
- }
- start = this_end;
- }
-
- return ~(u64)0;
-}
-
-u64 __init lmb_alloc_nid(u64 size, u64 align, int nid,
- u64 (*nid_range)(u64 start, u64 end, int *nid))
-{
- struct lmb_region *mem = &lmb.memory;
- int i;
-
- BUG_ON(0 == size);
-
- size = lmb_align_up(size, align);
-
- for (i = 0; i < mem->cnt; i++) {
- u64 ret = lmb_alloc_nid_region(&mem->region[i],
- nid_range,
- size, align, nid);
- if (ret != ~(u64)0)
- return ret;
- }
-
- return lmb_alloc(size, align);
-}
-
-u64 __init lmb_alloc(u64 size, u64 align)
-{
- return lmb_alloc_base(size, align, LMB_ALLOC_ANYWHERE);
-}
-
-u64 __init lmb_alloc_base(u64 size, u64 align, u64 max_addr)
-{
- u64 alloc;
-
- alloc = __lmb_alloc_base(size, align, max_addr);
-
- if (alloc == 0)
- panic("ERROR: Failed to allocate 0x%llx bytes below 0x%llx.\n",
- (unsigned long long) size, (unsigned long long) max_addr);
-
- return alloc;
-}
-
-u64 __init __lmb_alloc_base(u64 size, u64 align, u64 max_addr)
-{
- long i, j;
- u64 base = 0;
- u64 res_base;
-
- BUG_ON(0 == size);
-
- size = lmb_align_up(size, align);
-
- /* On some platforms, make sure we allocate lowmem */
- /* Note that LMB_REAL_LIMIT may be LMB_ALLOC_ANYWHERE */
- if (max_addr == LMB_ALLOC_ANYWHERE)
- max_addr = LMB_REAL_LIMIT;
-
- for (i = lmb.memory.cnt - 1; i >= 0; i--) {
- u64 lmbbase = lmb.memory.region[i].base;
- u64 lmbsize = lmb.memory.region[i].size;
-
- if (lmbsize < size)
- continue;
- if (max_addr == LMB_ALLOC_ANYWHERE)
- base = lmb_align_down(lmbbase + lmbsize - size, align);
- else if (lmbbase < max_addr) {
- base = min(lmbbase + lmbsize, max_addr);
- base = lmb_align_down(base - size, align);
- } else
- continue;
-
- while (base && lmbbase <= base) {
- j = lmb_overlaps_region(&lmb.reserved, base, size);
- if (j < 0) {
- /* this area isn't reserved, take it */
- if (lmb_add_region(&lmb.reserved, base, size) < 0)
- return 0;
- return base;
- }
- res_base = lmb.reserved.region[j].base;
- if (res_base < size)
- break;
- base = lmb_align_down(res_base - size, align);
- }
- }
- return 0;
-}
-
-/* You must call lmb_analyze() before this. */
-u64 __init lmb_phys_mem_size(void)
-{
- return lmb.memory.size;
-}
-
-u64 lmb_end_of_DRAM(void)
-{
- int idx = lmb.memory.cnt - 1;
-
- return (lmb.memory.region[idx].base + lmb.memory.region[idx].size);
-}
-
-/* You must call lmb_analyze() after this. */
-void __init lmb_enforce_memory_limit(u64 memory_limit)
-{
- unsigned long i;
- u64 limit;
- struct lmb_property *p;
-
- if (!memory_limit)
- return;
-
- /* Truncate the lmb regions to satisfy the memory limit. */
- limit = memory_limit;
- for (i = 0; i < lmb.memory.cnt; i++) {
- if (limit > lmb.memory.region[i].size) {
- limit -= lmb.memory.region[i].size;
- continue;
- }
-
- lmb.memory.region[i].size = limit;
- lmb.memory.cnt = i + 1;
- break;
- }
-
- if (lmb.memory.region[0].size < lmb.rmo_size)
- lmb.rmo_size = lmb.memory.region[0].size;
-
- memory_limit = lmb_end_of_DRAM();
-
- /* And truncate any reserves above the limit also. */
- for (i = 0; i < lmb.reserved.cnt; i++) {
- p = &lmb.reserved.region[i];
-
- if (p->base > memory_limit)
- p->size = 0;
- else if ((p->base + p->size) > memory_limit)
- p->size = memory_limit - p->base;
-
- if (p->size == 0) {
- lmb_remove_region(&lmb.reserved, i);
- i--;
- }
- }
-}
-
-int __init lmb_is_reserved(u64 addr)
-{
- int i;
-
- for (i = 0; i < lmb.reserved.cnt; i++) {
- u64 upper = lmb.reserved.region[i].base +
- lmb.reserved.region[i].size - 1;
- if ((addr >= lmb.reserved.region[i].base) && (addr <= upper))
- return 1;
- }
- return 0;
-}
-
-int lmb_is_region_reserved(u64 base, u64 size)
-{
- return lmb_overlaps_region(&lmb.reserved, base, size);
-}
-
-/*
- * Given a <base, len>, find which memory regions belong to this range.
- * Adjust the request and return a contiguous chunk.
- */
-int lmb_find(struct lmb_property *res)
-{
- int i;
- u64 rstart, rend;
-
- rstart = res->base;
- rend = rstart + res->size - 1;
-
- for (i = 0; i < lmb.memory.cnt; i++) {
- u64 start = lmb.memory.region[i].base;
- u64 end = start + lmb.memory.region[i].size - 1;
-
- if (start > rend)
- return -1;
-
- if ((end >= rstart) && (start < rend)) {
- /* adjust the request */
- if (rstart < start)
- rstart = start;
- if (rend > end)
- rend = end;
- res->base = rstart;
- res->size = rend - rstart + 1;
- return 0;
- }
- }
- return -1;
-}
diff --git a/lib/radix-tree.c b/lib/radix-tree.c
index 2a087e0..05da38b 100644
--- a/lib/radix-tree.c
+++ b/lib/radix-tree.c
@@ -656,7 +656,7 @@
*
* Returns: the index of the hole if found, otherwise returns an index
* outside of the set specified (in which case 'index - return >= max_scan'
- * will be true). In rare cases of wrap-around, LONG_MAX will be returned.
+ * will be true). In rare cases of wrap-around, ULONG_MAX will be returned.
*
* radix_tree_next_hole may be called under rcu_read_lock. However, like
* radix_tree_gang_lookup, this will not atomically search a snapshot of
@@ -674,7 +674,7 @@
if (!radix_tree_lookup(root, index))
break;
index--;
- if (index == LONG_MAX)
+ if (index == ULONG_MAX)
break;
}
diff --git a/lib/random32.c b/lib/random32.c
index 217d5c4..870dc3f 100644
--- a/lib/random32.c
+++ b/lib/random32.c
@@ -39,13 +39,16 @@
#include <linux/jiffies.h>
#include <linux/random.h>
-struct rnd_state {
- u32 s1, s2, s3;
-};
-
static DEFINE_PER_CPU(struct rnd_state, net_rand_state);
-static u32 __random32(struct rnd_state *state)
+/**
+ * prandom32 - seeded pseudo-random number generator.
+ * @state: pointer to state structure holding seeded state.
+ *
+ * This is used for pseudo-randomness with no outside seeding.
+ * For more random results, use random32().
+ */
+u32 prandom32(struct rnd_state *state)
{
#define TAUSWORTHE(s,a,b,c,d) ((s&c)<<d) ^ (((s <<a) ^ s)>>b)
@@ -55,14 +58,7 @@
return (state->s1 ^ state->s2 ^ state->s3);
}
-
-/*
- * Handle minimum values for seeds
- */
-static inline u32 __seed(u32 x, u32 m)
-{
- return (x < m) ? x + m : x;
-}
+EXPORT_SYMBOL(prandom32);
/**
* random32 - pseudo random number generator
@@ -75,7 +71,7 @@
{
unsigned long r;
struct rnd_state *state = &get_cpu_var(net_rand_state);
- r = __random32(state);
+ r = prandom32(state);
put_cpu_var(state);
return r;
}
@@ -118,12 +114,12 @@
state->s3 = __seed(LCG(state->s2), 15);
/* "warm it up" */
- __random32(state);
- __random32(state);
- __random32(state);
- __random32(state);
- __random32(state);
- __random32(state);
+ prandom32(state);
+ prandom32(state);
+ prandom32(state);
+ prandom32(state);
+ prandom32(state);
+ prandom32(state);
}
return 0;
}
@@ -147,7 +143,7 @@
state->s3 = __seed(seeds[2], 15);
/* mix it in */
- __random32(state);
+ prandom32(state);
}
return 0;
}
diff --git a/lib/rbtree.c b/lib/rbtree.c
index 15e10b1..4693f79 100644
--- a/lib/rbtree.c
+++ b/lib/rbtree.c
@@ -44,11 +44,6 @@
else
root->rb_node = right;
rb_set_parent(node, right);
-
- if (root->augment_cb) {
- root->augment_cb(node);
- root->augment_cb(right);
- }
}
static void __rb_rotate_right(struct rb_node *node, struct rb_root *root)
@@ -72,20 +67,12 @@
else
root->rb_node = left;
rb_set_parent(node, left);
-
- if (root->augment_cb) {
- root->augment_cb(node);
- root->augment_cb(left);
- }
}
void rb_insert_color(struct rb_node *node, struct rb_root *root)
{
struct rb_node *parent, *gparent;
- if (root->augment_cb)
- root->augment_cb(node);
-
while ((parent = rb_parent(node)) && rb_is_red(parent))
{
gparent = rb_parent(parent);
@@ -240,15 +227,12 @@
else
{
struct rb_node *old = node, *left;
- int old_parent_cb = 0;
- int successor_parent_cb = 0;
node = node->rb_right;
while ((left = node->rb_left) != NULL)
node = left;
if (rb_parent(old)) {
- old_parent_cb = 1;
if (rb_parent(old)->rb_left == old)
rb_parent(old)->rb_left = node;
else
@@ -263,10 +247,8 @@
if (parent == old) {
parent = node;
} else {
- successor_parent_cb = 1;
if (child)
rb_set_parent(child, parent);
-
parent->rb_left = child;
node->rb_right = old->rb_right;
@@ -277,24 +259,6 @@
node->rb_left = old->rb_left;
rb_set_parent(old->rb_left, node);
- if (root->augment_cb) {
- /*
- * Here, three different nodes can have new children.
- * The parent of the successor node that was selected
- * to replace the node to be erased.
- * The node that is getting erased and is now replaced
- * by its successor.
- * The parent of the node getting erased-replaced.
- */
- if (successor_parent_cb)
- root->augment_cb(parent);
-
- root->augment_cb(node);
-
- if (old_parent_cb)
- root->augment_cb(rb_parent(old));
- }
-
goto color;
}
@@ -303,19 +267,15 @@
if (child)
rb_set_parent(child, parent);
-
- if (parent) {
+ if (parent)
+ {
if (parent->rb_left == node)
parent->rb_left = child;
else
parent->rb_right = child;
-
- if (root->augment_cb)
- root->augment_cb(parent);
-
- } else {
- root->rb_node = child;
}
+ else
+ root->rb_node = child;
color:
if (color == RB_BLACK)
@@ -323,6 +283,74 @@
}
EXPORT_SYMBOL(rb_erase);
+static void rb_augment_path(struct rb_node *node, rb_augment_f func, void *data)
+{
+ struct rb_node *parent;
+
+up:
+ func(node, data);
+ parent = rb_parent(node);
+ if (!parent)
+ return;
+
+ if (node == parent->rb_left && parent->rb_right)
+ func(parent->rb_right, data);
+ else if (parent->rb_left)
+ func(parent->rb_left, data);
+
+ node = parent;
+ goto up;
+}
+
+/*
+ * after inserting @node into the tree, update the tree to account for
+ * both the new entry and any damage done by rebalance
+ */
+void rb_augment_insert(struct rb_node *node, rb_augment_f func, void *data)
+{
+ if (node->rb_left)
+ node = node->rb_left;
+ else if (node->rb_right)
+ node = node->rb_right;
+
+ rb_augment_path(node, func, data);
+}
+
+/*
+ * before removing the node, find the deepest node on the rebalance path
+ * that will still be there after @node gets removed
+ */
+struct rb_node *rb_augment_erase_begin(struct rb_node *node)
+{
+ struct rb_node *deepest;
+
+ if (!node->rb_right && !node->rb_left)
+ deepest = rb_parent(node);
+ else if (!node->rb_right)
+ deepest = node->rb_left;
+ else if (!node->rb_left)
+ deepest = node->rb_right;
+ else {
+ deepest = rb_next(node);
+ if (deepest->rb_right)
+ deepest = deepest->rb_right;
+ else if (rb_parent(deepest) != node)
+ deepest = rb_parent(deepest);
+ }
+
+ return deepest;
+}
+
+/*
+ * after removal, update the tree to account for the removed entry
+ * and any rebalance damage.
+ */
+void rb_augment_erase_end(struct rb_node *node, rb_augment_f func, void *data)
+{
+ if (node)
+ rb_augment_path(node, func, data);
+}
+
/*
* This function returns the first node (in sort order) of the tree.
*/
diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index 5fddf72..a009055 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -757,37 +757,6 @@
EXPORT_SYMBOL(swiotlb_sync_single_for_device);
/*
- * Same as above, but for a sub-range of the mapping.
- */
-static void
-swiotlb_sync_single_range(struct device *hwdev, dma_addr_t dev_addr,
- unsigned long offset, size_t size,
- int dir, int target)
-{
- swiotlb_sync_single(hwdev, dev_addr + offset, size, dir, target);
-}
-
-void
-swiotlb_sync_single_range_for_cpu(struct device *hwdev, dma_addr_t dev_addr,
- unsigned long offset, size_t size,
- enum dma_data_direction dir)
-{
- swiotlb_sync_single_range(hwdev, dev_addr, offset, size, dir,
- SYNC_FOR_CPU);
-}
-EXPORT_SYMBOL_GPL(swiotlb_sync_single_range_for_cpu);
-
-void
-swiotlb_sync_single_range_for_device(struct device *hwdev, dma_addr_t dev_addr,
- unsigned long offset, size_t size,
- enum dma_data_direction dir)
-{
- swiotlb_sync_single_range(hwdev, dev_addr, offset, size, dir,
- SYNC_FOR_DEVICE);
-}
-EXPORT_SYMBOL_GPL(swiotlb_sync_single_range_for_device);
-
-/*
* Map a set of buffers described by scatterlist in streaming mode for DMA.
* This is the scatter-gather version of the above swiotlb_map_page
* interface. Here the scatter gather list elements are each tagged with the
diff --git a/lib/uuid.c b/lib/uuid.c
new file mode 100644
index 0000000..8fadd7c
--- /dev/null
+++ b/lib/uuid.c
@@ -0,0 +1,53 @@
+/*
+ * Unified UUID/GUID definition
+ *
+ * Copyright (C) 2009, Intel Corp.
+ * Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation;
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/uuid.h>
+#include <linux/random.h>
+
+static void __uuid_gen_common(__u8 b[16])
+{
+ int i;
+ u32 r;
+
+ for (i = 0; i < 4; i++) {
+ r = random32();
+ memcpy(b + i * 4, &r, 4);
+ }
+ /* reversion 0b10 */
+ b[8] = (b[8] & 0x3F) | 0x80;
+}
+
+void uuid_le_gen(uuid_le *lu)
+{
+ __uuid_gen_common(lu->b);
+ /* version 4 : random generation */
+ lu->b[7] = (lu->b[7] & 0x0F) | 0x40;
+}
+EXPORT_SYMBOL_GPL(uuid_le_gen);
+
+void uuid_be_gen(uuid_be *bu)
+{
+ __uuid_gen_common(bu->b);
+ /* version 4 : random generation */
+ bu->b[6] = (bu->b[6] & 0x0F) | 0x40;
+}
+EXPORT_SYMBOL_GPL(uuid_be_gen);
diff --git a/mm/Kconfig b/mm/Kconfig
index 527136b..f4e516e 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -128,6 +128,9 @@
pfn_to_page and page_to_pfn operations. This is the most
efficient option when sufficient kernel resources are available.
+config HAVE_MEMBLOCK
+ boolean
+
# eventually, we can have this option just 'select SPARSEMEM'
config MEMORY_HOTPLUG
bool "Allow for memory hot-add"
diff --git a/mm/Makefile b/mm/Makefile
index 8982504..34b2546 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -15,6 +15,8 @@
$(mmu-y)
obj-y += init-mm.o
+obj-$(CONFIG_HAVE_MEMBLOCK) += memblock.o
+
obj-$(CONFIG_BOUNCE) += bounce.o
obj-$(CONFIG_SWAP) += page_io.o swap_state.o swapfile.o thrash.o
obj-$(CONFIG_HAS_DMA) += dmapool.o
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 660a87a..123bcef 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -104,15 +104,13 @@
"b_more_io: %8lu\n"
"bdi_list: %8u\n"
"state: %8lx\n"
- "wb_mask: %8lx\n"
- "wb_list: %8u\n"
- "wb_cnt: %8u\n",
+ "wb_list: %8u\n",
(unsigned long) K(bdi_stat(bdi, BDI_WRITEBACK)),
(unsigned long) K(bdi_stat(bdi, BDI_RECLAIMABLE)),
K(bdi_thresh), K(dirty_thresh),
K(background_thresh), nr_wb, nr_dirty, nr_io, nr_more_io,
- !list_empty(&bdi->bdi_list), bdi->state, bdi->wb_mask,
- !list_empty(&bdi->wb_list), bdi->wb_cnt);
+ !list_empty(&bdi->bdi_list), bdi->state,
+ !list_empty(&bdi->wb_list));
#undef K
return 0;
@@ -340,14 +338,13 @@
static void bdi_flush_io(struct backing_dev_info *bdi)
{
struct writeback_control wbc = {
- .bdi = bdi,
.sync_mode = WB_SYNC_NONE,
.older_than_this = NULL,
.range_cyclic = 1,
.nr_to_write = 1024,
};
- writeback_inodes_wbc(&wbc);
+ writeback_inodes_wb(&bdi->wb, &wbc);
}
/*
@@ -675,12 +672,6 @@
bdi_wb_init(&bdi->wb, bdi);
- /*
- * Just one thread support for now, hard code mask and count
- */
- bdi->wb_mask = 1;
- bdi->wb_cnt = 1;
-
for (i = 0; i < NR_BDI_STAT_ITEMS; i++) {
err = percpu_counter_init(&bdi->bdi_stat[i], 0);
if (err)
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 58c66cc..142c84a 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -833,15 +833,24 @@
void * __init __alloc_bootmem_node(pg_data_t *pgdat, unsigned long size,
unsigned long align, unsigned long goal)
{
+ void *ptr;
+
if (WARN_ON_ONCE(slab_is_available()))
return kzalloc_node(size, GFP_NOWAIT, pgdat->node_id);
#ifdef CONFIG_NO_BOOTMEM
- return __alloc_memory_core_early(pgdat->node_id, size, align,
+ ptr = __alloc_memory_core_early(pgdat->node_id, size, align,
+ goal, -1ULL);
+ if (ptr)
+ return ptr;
+
+ ptr = __alloc_memory_core_early(MAX_NUMNODES, size, align,
goal, -1ULL);
#else
- return ___alloc_bootmem_node(pgdat->bdata, size, align, goal, 0);
+ ptr = ___alloc_bootmem_node(pgdat->bdata, size, align, goal, 0);
#endif
+
+ return ptr;
}
void * __init __alloc_bootmem_node_high(pg_data_t *pgdat, unsigned long size,
@@ -977,14 +986,21 @@
void * __init __alloc_bootmem_low_node(pg_data_t *pgdat, unsigned long size,
unsigned long align, unsigned long goal)
{
+ void *ptr;
+
if (WARN_ON_ONCE(slab_is_available()))
return kzalloc_node(size, GFP_NOWAIT, pgdat->node_id);
#ifdef CONFIG_NO_BOOTMEM
- return __alloc_memory_core_early(pgdat->node_id, size, align,
+ ptr = __alloc_memory_core_early(pgdat->node_id, size, align,
+ goal, ARCH_LOW_ADDRESS_LIMIT);
+ if (ptr)
+ return ptr;
+ ptr = __alloc_memory_core_early(MAX_NUMNODES, size, align,
goal, ARCH_LOW_ADDRESS_LIMIT);
#else
- return ___alloc_bootmem_node(pgdat->bdata, size, align,
+ ptr = ___alloc_bootmem_node(pgdat->bdata, size, align,
goal, ARCH_LOW_ADDRESS_LIMIT);
#endif
+ return ptr;
}
diff --git a/mm/filemap.c b/mm/filemap.c
index 88d7196..20e5642 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -151,6 +151,7 @@
spin_unlock_irq(&mapping->tree_lock);
mem_cgroup_uncharge_cache_page(page);
}
+EXPORT_SYMBOL(remove_from_page_cache);
static int sync_page(void *word)
{
@@ -1105,6 +1106,12 @@
}
readpage:
+ /*
+ * A previous I/O error may have been due to temporary
+ * failures, eg. multipath errors.
+ * PG_error will be set again if readpage fails.
+ */
+ ClearPageError(page);
/* Start the actual read. The read will unlock the page. */
error = mapping->a_ops->readpage(filp, page);
@@ -1269,7 +1276,7 @@
{
struct file *filp = iocb->ki_filp;
ssize_t retval;
- unsigned long seg;
+ unsigned long seg = 0;
size_t count;
loff_t *ppos = &iocb->ki_pos;
@@ -1296,21 +1303,47 @@
retval = mapping->a_ops->direct_IO(READ, iocb,
iov, pos, nr_segs);
}
- if (retval > 0)
+ if (retval > 0) {
*ppos = pos + retval;
- if (retval) {
+ count -= retval;
+ }
+
+ /*
+ * Btrfs can have a short DIO read if we encounter
+ * compressed extents, so if there was an error, or if
+ * we've already read everything we wanted to, or if
+ * there was a short read because we hit EOF, go ahead
+ * and return. Otherwise fallthrough to buffered io for
+ * the rest of the read.
+ */
+ if (retval < 0 || !count || *ppos >= size) {
file_accessed(filp);
goto out;
}
}
}
+ count = retval;
for (seg = 0; seg < nr_segs; seg++) {
read_descriptor_t desc;
+ loff_t offset = 0;
+
+ /*
+ * If we did a short DIO read we need to skip the section of the
+ * iov that we've already read data into.
+ */
+ if (count) {
+ if (count > iov[seg].iov_len) {
+ count -= iov[seg].iov_len;
+ continue;
+ }
+ offset = count;
+ count = 0;
+ }
desc.written = 0;
- desc.arg.buf = iov[seg].iov_base;
- desc.count = iov[seg].iov_len;
+ desc.arg.buf = iov[seg].iov_base + offset;
+ desc.count = iov[seg].iov_len - offset;
if (desc.count == 0)
continue;
desc.error = 0;
diff --git a/mm/memblock.c b/mm/memblock.c
new file mode 100644
index 0000000..3024eb3
--- /dev/null
+++ b/mm/memblock.c
@@ -0,0 +1,541 @@
+/*
+ * Procedures for maintaining information about logical memory blocks.
+ *
+ * Peter Bergner, IBM Corp. June 2001.
+ * Copyright (C) 2001 Peter Bergner.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/memblock.h>
+
+#define MEMBLOCK_ALLOC_ANYWHERE 0
+
+struct memblock memblock;
+
+static int memblock_debug;
+
+static int __init early_memblock(char *p)
+{
+ if (p && strstr(p, "debug"))
+ memblock_debug = 1;
+ return 0;
+}
+early_param("memblock", early_memblock);
+
+static void memblock_dump(struct memblock_region *region, char *name)
+{
+ unsigned long long base, size;
+ int i;
+
+ pr_info(" %s.cnt = 0x%lx\n", name, region->cnt);
+
+ for (i = 0; i < region->cnt; i++) {
+ base = region->region[i].base;
+ size = region->region[i].size;
+
+ pr_info(" %s[0x%x]\t0x%016llx - 0x%016llx, 0x%llx bytes\n",
+ name, i, base, base + size - 1, size);
+ }
+}
+
+void memblock_dump_all(void)
+{
+ if (!memblock_debug)
+ return;
+
+ pr_info("MEMBLOCK configuration:\n");
+ pr_info(" rmo_size = 0x%llx\n", (unsigned long long)memblock.rmo_size);
+ pr_info(" memory.size = 0x%llx\n", (unsigned long long)memblock.memory.size);
+
+ memblock_dump(&memblock.memory, "memory");
+ memblock_dump(&memblock.reserved, "reserved");
+}
+
+static unsigned long memblock_addrs_overlap(u64 base1, u64 size1, u64 base2,
+ u64 size2)
+{
+ return ((base1 < (base2 + size2)) && (base2 < (base1 + size1)));
+}
+
+static long memblock_addrs_adjacent(u64 base1, u64 size1, u64 base2, u64 size2)
+{
+ if (base2 == base1 + size1)
+ return 1;
+ else if (base1 == base2 + size2)
+ return -1;
+
+ return 0;
+}
+
+static long memblock_regions_adjacent(struct memblock_region *rgn,
+ unsigned long r1, unsigned long r2)
+{
+ u64 base1 = rgn->region[r1].base;
+ u64 size1 = rgn->region[r1].size;
+ u64 base2 = rgn->region[r2].base;
+ u64 size2 = rgn->region[r2].size;
+
+ return memblock_addrs_adjacent(base1, size1, base2, size2);
+}
+
+static void memblock_remove_region(struct memblock_region *rgn, unsigned long r)
+{
+ unsigned long i;
+
+ for (i = r; i < rgn->cnt - 1; i++) {
+ rgn->region[i].base = rgn->region[i + 1].base;
+ rgn->region[i].size = rgn->region[i + 1].size;
+ }
+ rgn->cnt--;
+}
+
+/* Assumption: base addr of region 1 < base addr of region 2 */
+static void memblock_coalesce_regions(struct memblock_region *rgn,
+ unsigned long r1, unsigned long r2)
+{
+ rgn->region[r1].size += rgn->region[r2].size;
+ memblock_remove_region(rgn, r2);
+}
+
+void __init memblock_init(void)
+{
+ /* Create a dummy zero size MEMBLOCK which will get coalesced away later.
+ * This simplifies the memblock_add() code below...
+ */
+ memblock.memory.region[0].base = 0;
+ memblock.memory.region[0].size = 0;
+ memblock.memory.cnt = 1;
+
+ /* Ditto. */
+ memblock.reserved.region[0].base = 0;
+ memblock.reserved.region[0].size = 0;
+ memblock.reserved.cnt = 1;
+}
+
+void __init memblock_analyze(void)
+{
+ int i;
+
+ memblock.memory.size = 0;
+
+ for (i = 0; i < memblock.memory.cnt; i++)
+ memblock.memory.size += memblock.memory.region[i].size;
+}
+
+static long memblock_add_region(struct memblock_region *rgn, u64 base, u64 size)
+{
+ unsigned long coalesced = 0;
+ long adjacent, i;
+
+ if ((rgn->cnt == 1) && (rgn->region[0].size == 0)) {
+ rgn->region[0].base = base;
+ rgn->region[0].size = size;
+ return 0;
+ }
+
+ /* First try and coalesce this MEMBLOCK with another. */
+ for (i = 0; i < rgn->cnt; i++) {
+ u64 rgnbase = rgn->region[i].base;
+ u64 rgnsize = rgn->region[i].size;
+
+ if ((rgnbase == base) && (rgnsize == size))
+ /* Already have this region, so we're done */
+ return 0;
+
+ adjacent = memblock_addrs_adjacent(base, size, rgnbase, rgnsize);
+ if (adjacent > 0) {
+ rgn->region[i].base -= size;
+ rgn->region[i].size += size;
+ coalesced++;
+ break;
+ } else if (adjacent < 0) {
+ rgn->region[i].size += size;
+ coalesced++;
+ break;
+ }
+ }
+
+ if ((i < rgn->cnt - 1) && memblock_regions_adjacent(rgn, i, i+1)) {
+ memblock_coalesce_regions(rgn, i, i+1);
+ coalesced++;
+ }
+
+ if (coalesced)
+ return coalesced;
+ if (rgn->cnt >= MAX_MEMBLOCK_REGIONS)
+ return -1;
+
+ /* Couldn't coalesce the MEMBLOCK, so add it to the sorted table. */
+ for (i = rgn->cnt - 1; i >= 0; i--) {
+ if (base < rgn->region[i].base) {
+ rgn->region[i+1].base = rgn->region[i].base;
+ rgn->region[i+1].size = rgn->region[i].size;
+ } else {
+ rgn->region[i+1].base = base;
+ rgn->region[i+1].size = size;
+ break;
+ }
+ }
+
+ if (base < rgn->region[0].base) {
+ rgn->region[0].base = base;
+ rgn->region[0].size = size;
+ }
+ rgn->cnt++;
+
+ return 0;
+}
+
+long memblock_add(u64 base, u64 size)
+{
+ struct memblock_region *_rgn = &memblock.memory;
+
+ /* On pSeries LPAR systems, the first MEMBLOCK is our RMO region. */
+ if (base == 0)
+ memblock.rmo_size = size;
+
+ return memblock_add_region(_rgn, base, size);
+
+}
+
+static long __memblock_remove(struct memblock_region *rgn, u64 base, u64 size)
+{
+ u64 rgnbegin, rgnend;
+ u64 end = base + size;
+ int i;
+
+ rgnbegin = rgnend = 0; /* supress gcc warnings */
+
+ /* Find the region where (base, size) belongs to */
+ for (i=0; i < rgn->cnt; i++) {
+ rgnbegin = rgn->region[i].base;
+ rgnend = rgnbegin + rgn->region[i].size;
+
+ if ((rgnbegin <= base) && (end <= rgnend))
+ break;
+ }
+
+ /* Didn't find the region */
+ if (i == rgn->cnt)
+ return -1;
+
+ /* Check to see if we are removing entire region */
+ if ((rgnbegin == base) && (rgnend == end)) {
+ memblock_remove_region(rgn, i);
+ return 0;
+ }
+
+ /* Check to see if region is matching at the front */
+ if (rgnbegin == base) {
+ rgn->region[i].base = end;
+ rgn->region[i].size -= size;
+ return 0;
+ }
+
+ /* Check to see if the region is matching at the end */
+ if (rgnend == end) {
+ rgn->region[i].size -= size;
+ return 0;
+ }
+
+ /*
+ * We need to split the entry - adjust the current one to the
+ * beginging of the hole and add the region after hole.
+ */
+ rgn->region[i].size = base - rgn->region[i].base;
+ return memblock_add_region(rgn, end, rgnend - end);
+}
+
+long memblock_remove(u64 base, u64 size)
+{
+ return __memblock_remove(&memblock.memory, base, size);
+}
+
+long __init memblock_free(u64 base, u64 size)
+{
+ return __memblock_remove(&memblock.reserved, base, size);
+}
+
+long __init memblock_reserve(u64 base, u64 size)
+{
+ struct memblock_region *_rgn = &memblock.reserved;
+
+ BUG_ON(0 == size);
+
+ return memblock_add_region(_rgn, base, size);
+}
+
+long memblock_overlaps_region(struct memblock_region *rgn, u64 base, u64 size)
+{
+ unsigned long i;
+
+ for (i = 0; i < rgn->cnt; i++) {
+ u64 rgnbase = rgn->region[i].base;
+ u64 rgnsize = rgn->region[i].size;
+ if (memblock_addrs_overlap(base, size, rgnbase, rgnsize))
+ break;
+ }
+
+ return (i < rgn->cnt) ? i : -1;
+}
+
+static u64 memblock_align_down(u64 addr, u64 size)
+{
+ return addr & ~(size - 1);
+}
+
+static u64 memblock_align_up(u64 addr, u64 size)
+{
+ return (addr + (size - 1)) & ~(size - 1);
+}
+
+static u64 __init memblock_alloc_nid_unreserved(u64 start, u64 end,
+ u64 size, u64 align)
+{
+ u64 base, res_base;
+ long j;
+
+ base = memblock_align_down((end - size), align);
+ while (start <= base) {
+ j = memblock_overlaps_region(&memblock.reserved, base, size);
+ if (j < 0) {
+ /* this area isn't reserved, take it */
+ if (memblock_add_region(&memblock.reserved, base, size) < 0)
+ base = ~(u64)0;
+ return base;
+ }
+ res_base = memblock.reserved.region[j].base;
+ if (res_base < size)
+ break;
+ base = memblock_align_down(res_base - size, align);
+ }
+
+ return ~(u64)0;
+}
+
+static u64 __init memblock_alloc_nid_region(struct memblock_property *mp,
+ u64 (*nid_range)(u64, u64, int *),
+ u64 size, u64 align, int nid)
+{
+ u64 start, end;
+
+ start = mp->base;
+ end = start + mp->size;
+
+ start = memblock_align_up(start, align);
+ while (start < end) {
+ u64 this_end;
+ int this_nid;
+
+ this_end = nid_range(start, end, &this_nid);
+ if (this_nid == nid) {
+ u64 ret = memblock_alloc_nid_unreserved(start, this_end,
+ size, align);
+ if (ret != ~(u64)0)
+ return ret;
+ }
+ start = this_end;
+ }
+
+ return ~(u64)0;
+}
+
+u64 __init memblock_alloc_nid(u64 size, u64 align, int nid,
+ u64 (*nid_range)(u64 start, u64 end, int *nid))
+{
+ struct memblock_region *mem = &memblock.memory;
+ int i;
+
+ BUG_ON(0 == size);
+
+ size = memblock_align_up(size, align);
+
+ for (i = 0; i < mem->cnt; i++) {
+ u64 ret = memblock_alloc_nid_region(&mem->region[i],
+ nid_range,
+ size, align, nid);
+ if (ret != ~(u64)0)
+ return ret;
+ }
+
+ return memblock_alloc(size, align);
+}
+
+u64 __init memblock_alloc(u64 size, u64 align)
+{
+ return memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ANYWHERE);
+}
+
+u64 __init memblock_alloc_base(u64 size, u64 align, u64 max_addr)
+{
+ u64 alloc;
+
+ alloc = __memblock_alloc_base(size, align, max_addr);
+
+ if (alloc == 0)
+ panic("ERROR: Failed to allocate 0x%llx bytes below 0x%llx.\n",
+ (unsigned long long) size, (unsigned long long) max_addr);
+
+ return alloc;
+}
+
+u64 __init __memblock_alloc_base(u64 size, u64 align, u64 max_addr)
+{
+ long i, j;
+ u64 base = 0;
+ u64 res_base;
+
+ BUG_ON(0 == size);
+
+ size = memblock_align_up(size, align);
+
+ /* On some platforms, make sure we allocate lowmem */
+ /* Note that MEMBLOCK_REAL_LIMIT may be MEMBLOCK_ALLOC_ANYWHERE */
+ if (max_addr == MEMBLOCK_ALLOC_ANYWHERE)
+ max_addr = MEMBLOCK_REAL_LIMIT;
+
+ for (i = memblock.memory.cnt - 1; i >= 0; i--) {
+ u64 memblockbase = memblock.memory.region[i].base;
+ u64 memblocksize = memblock.memory.region[i].size;
+
+ if (memblocksize < size)
+ continue;
+ if (max_addr == MEMBLOCK_ALLOC_ANYWHERE)
+ base = memblock_align_down(memblockbase + memblocksize - size, align);
+ else if (memblockbase < max_addr) {
+ base = min(memblockbase + memblocksize, max_addr);
+ base = memblock_align_down(base - size, align);
+ } else
+ continue;
+
+ while (base && memblockbase <= base) {
+ j = memblock_overlaps_region(&memblock.reserved, base, size);
+ if (j < 0) {
+ /* this area isn't reserved, take it */
+ if (memblock_add_region(&memblock.reserved, base, size) < 0)
+ return 0;
+ return base;
+ }
+ res_base = memblock.reserved.region[j].base;
+ if (res_base < size)
+ break;
+ base = memblock_align_down(res_base - size, align);
+ }
+ }
+ return 0;
+}
+
+/* You must call memblock_analyze() before this. */
+u64 __init memblock_phys_mem_size(void)
+{
+ return memblock.memory.size;
+}
+
+u64 memblock_end_of_DRAM(void)
+{
+ int idx = memblock.memory.cnt - 1;
+
+ return (memblock.memory.region[idx].base + memblock.memory.region[idx].size);
+}
+
+/* You must call memblock_analyze() after this. */
+void __init memblock_enforce_memory_limit(u64 memory_limit)
+{
+ unsigned long i;
+ u64 limit;
+ struct memblock_property *p;
+
+ if (!memory_limit)
+ return;
+
+ /* Truncate the memblock regions to satisfy the memory limit. */
+ limit = memory_limit;
+ for (i = 0; i < memblock.memory.cnt; i++) {
+ if (limit > memblock.memory.region[i].size) {
+ limit -= memblock.memory.region[i].size;
+ continue;
+ }
+
+ memblock.memory.region[i].size = limit;
+ memblock.memory.cnt = i + 1;
+ break;
+ }
+
+ if (memblock.memory.region[0].size < memblock.rmo_size)
+ memblock.rmo_size = memblock.memory.region[0].size;
+
+ memory_limit = memblock_end_of_DRAM();
+
+ /* And truncate any reserves above the limit also. */
+ for (i = 0; i < memblock.reserved.cnt; i++) {
+ p = &memblock.reserved.region[i];
+
+ if (p->base > memory_limit)
+ p->size = 0;
+ else if ((p->base + p->size) > memory_limit)
+ p->size = memory_limit - p->base;
+
+ if (p->size == 0) {
+ memblock_remove_region(&memblock.reserved, i);
+ i--;
+ }
+ }
+}
+
+int __init memblock_is_reserved(u64 addr)
+{
+ int i;
+
+ for (i = 0; i < memblock.reserved.cnt; i++) {
+ u64 upper = memblock.reserved.region[i].base +
+ memblock.reserved.region[i].size - 1;
+ if ((addr >= memblock.reserved.region[i].base) && (addr <= upper))
+ return 1;
+ }
+ return 0;
+}
+
+int memblock_is_region_reserved(u64 base, u64 size)
+{
+ return memblock_overlaps_region(&memblock.reserved, base, size);
+}
+
+/*
+ * Given a <base, len>, find which memory regions belong to this range.
+ * Adjust the request and return a contiguous chunk.
+ */
+int memblock_find(struct memblock_property *res)
+{
+ int i;
+ u64 rstart, rend;
+
+ rstart = res->base;
+ rend = rstart + res->size - 1;
+
+ for (i = 0; i < memblock.memory.cnt; i++) {
+ u64 start = memblock.memory.region[i].base;
+ u64 end = start + memblock.memory.region[i].size - 1;
+
+ if (start > rend)
+ return -1;
+
+ if ((end >= rstart) && (start < rend)) {
+ /* adjust the request */
+ if (rstart < start)
+ rstart = start;
+ if (rend > end)
+ rend = end;
+ res->base = rstart;
+ res->size = rend - rstart + 1;
+ return 0;
+ }
+ }
+ return -1;
+}
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index c8569bc..20a8193 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -149,16 +149,35 @@
u64 threshold;
};
+/* For threshold */
struct mem_cgroup_threshold_ary {
/* An array index points to threshold just below usage. */
- atomic_t current_threshold;
+ int current_threshold;
/* Size of entries[] */
unsigned int size;
/* Array of thresholds */
struct mem_cgroup_threshold entries[0];
};
+struct mem_cgroup_thresholds {
+ /* Primary thresholds array */
+ struct mem_cgroup_threshold_ary *primary;
+ /*
+ * Spare threshold array.
+ * This is needed to make mem_cgroup_unregister_event() "never fail".
+ * It must be able to store at least primary->size - 1 entries.
+ */
+ struct mem_cgroup_threshold_ary *spare;
+};
+
+/* for OOM */
+struct mem_cgroup_eventfd_list {
+ struct list_head list;
+ struct eventfd_ctx *eventfd;
+};
+
static void mem_cgroup_threshold(struct mem_cgroup *mem);
+static void mem_cgroup_oom_notify(struct mem_cgroup *mem);
/*
* The memory controller data structure. The memory controller controls both
@@ -207,6 +226,8 @@
atomic_t refcnt;
unsigned int swappiness;
+ /* OOM-Killer disable */
+ int oom_kill_disable;
/* set when res.limit == memsw.limit */
bool memsw_is_minimum;
@@ -215,17 +236,19 @@
struct mutex thresholds_lock;
/* thresholds for memory usage. RCU-protected */
- struct mem_cgroup_threshold_ary *thresholds;
+ struct mem_cgroup_thresholds thresholds;
/* thresholds for mem+swap usage. RCU-protected */
- struct mem_cgroup_threshold_ary *memsw_thresholds;
+ struct mem_cgroup_thresholds memsw_thresholds;
+
+ /* For oom notifier event fd */
+ struct list_head oom_notify;
/*
* Should we move charges of a task when a task is moved into this
* mem_cgroup ? And what type of charges should we move ?
*/
unsigned long move_charge_at_immigrate;
-
/*
* percpu counter.
*/
@@ -239,6 +262,7 @@
*/
enum move_type {
MOVE_CHARGE_TYPE_ANON, /* private anonymous page and swap of it */
+ MOVE_CHARGE_TYPE_FILE, /* file page(including tmpfs) and swap of it */
NR_MOVE_TYPE,
};
@@ -255,6 +279,18 @@
.waitq = __WAIT_QUEUE_HEAD_INITIALIZER(mc.waitq),
};
+static bool move_anon(void)
+{
+ return test_bit(MOVE_CHARGE_TYPE_ANON,
+ &mc.to->move_charge_at_immigrate);
+}
+
+static bool move_file(void)
+{
+ return test_bit(MOVE_CHARGE_TYPE_FILE,
+ &mc.to->move_charge_at_immigrate);
+}
+
/*
* Maximum loops in mem_cgroup_hierarchical_reclaim(), used for soft
* limit reclaim to prevent infinite loops, if they ever occur.
@@ -282,9 +318,12 @@
/* for encoding cft->private value on file */
#define _MEM (0)
#define _MEMSWAP (1)
+#define _OOM_TYPE (2)
#define MEMFILE_PRIVATE(x, val) (((x) << 16) | (val))
#define MEMFILE_TYPE(val) (((val) >> 16) & 0xffff)
#define MEMFILE_ATTR(val) ((val) & 0xffff)
+/* Used for OOM nofiier */
+#define OOM_CONTROL (0)
/*
* Reclaim flags for mem_cgroup_hierarchical_reclaim
@@ -1293,14 +1332,62 @@
static DEFINE_MUTEX(memcg_oom_mutex);
static DECLARE_WAIT_QUEUE_HEAD(memcg_oom_waitq);
+struct oom_wait_info {
+ struct mem_cgroup *mem;
+ wait_queue_t wait;
+};
+
+static int memcg_oom_wake_function(wait_queue_t *wait,
+ unsigned mode, int sync, void *arg)
+{
+ struct mem_cgroup *wake_mem = (struct mem_cgroup *)arg;
+ struct oom_wait_info *oom_wait_info;
+
+ oom_wait_info = container_of(wait, struct oom_wait_info, wait);
+
+ if (oom_wait_info->mem == wake_mem)
+ goto wakeup;
+ /* if no hierarchy, no match */
+ if (!oom_wait_info->mem->use_hierarchy || !wake_mem->use_hierarchy)
+ return 0;
+ /*
+ * Both of oom_wait_info->mem and wake_mem are stable under us.
+ * Then we can use css_is_ancestor without taking care of RCU.
+ */
+ if (!css_is_ancestor(&oom_wait_info->mem->css, &wake_mem->css) &&
+ !css_is_ancestor(&wake_mem->css, &oom_wait_info->mem->css))
+ return 0;
+
+wakeup:
+ return autoremove_wake_function(wait, mode, sync, arg);
+}
+
+static void memcg_wakeup_oom(struct mem_cgroup *mem)
+{
+ /* for filtering, pass "mem" as argument. */
+ __wake_up(&memcg_oom_waitq, TASK_NORMAL, 0, mem);
+}
+
+static void memcg_oom_recover(struct mem_cgroup *mem)
+{
+ if (atomic_read(&mem->oom_lock))
+ memcg_wakeup_oom(mem);
+}
+
/*
* try to call OOM killer. returns false if we should exit memory-reclaim loop.
*/
bool mem_cgroup_handle_oom(struct mem_cgroup *mem, gfp_t mask)
{
- DEFINE_WAIT(wait);
- bool locked;
+ struct oom_wait_info owait;
+ bool locked, need_to_kill;
+ owait.mem = mem;
+ owait.wait.flags = 0;
+ owait.wait.func = memcg_oom_wake_function;
+ owait.wait.private = current;
+ INIT_LIST_HEAD(&owait.wait.task_list);
+ need_to_kill = true;
/* At first, try to OOM lock hierarchy under mem.*/
mutex_lock(&memcg_oom_mutex);
locked = mem_cgroup_oom_lock(mem);
@@ -1309,32 +1396,23 @@
* accounting. So, UNINTERRUPTIBLE is appropriate. But SIGKILL
* under OOM is always welcomed, use TASK_KILLABLE here.
*/
- if (!locked)
- prepare_to_wait(&memcg_oom_waitq, &wait, TASK_KILLABLE);
+ prepare_to_wait(&memcg_oom_waitq, &owait.wait, TASK_KILLABLE);
+ if (!locked || mem->oom_kill_disable)
+ need_to_kill = false;
+ if (locked)
+ mem_cgroup_oom_notify(mem);
mutex_unlock(&memcg_oom_mutex);
- if (locked)
+ if (need_to_kill) {
+ finish_wait(&memcg_oom_waitq, &owait.wait);
mem_cgroup_out_of_memory(mem, mask);
- else {
+ } else {
schedule();
- finish_wait(&memcg_oom_waitq, &wait);
+ finish_wait(&memcg_oom_waitq, &owait.wait);
}
mutex_lock(&memcg_oom_mutex);
mem_cgroup_oom_unlock(mem);
- /*
- * Here, we use global waitq .....more fine grained waitq ?
- * Assume following hierarchy.
- * A/
- * 01
- * 02
- * assume OOM happens both in A and 01 at the same time. Tthey are
- * mutually exclusive by lock. (kill in 01 helps A.)
- * When we use per memcg waitq, we have to wake up waiters on A and 02
- * in addtion to waiters on 01. We use global waitq for avoiding mess.
- * It will not be a big problem.
- * (And a task may be moved to other groups while it's waiting for OOM.)
- */
- wake_up_all(&memcg_oom_waitq);
+ memcg_wakeup_oom(mem);
mutex_unlock(&memcg_oom_mutex);
if (test_thread_flag(TIF_MEMDIE) || fatal_signal_pending(current))
@@ -2118,15 +2196,6 @@
/* If swapout, usage of swap doesn't decrease */
if (!do_swap_account || ctype == MEM_CGROUP_CHARGE_TYPE_SWAPOUT)
uncharge_memsw = false;
- /*
- * do_batch > 0 when unmapping pages or inode invalidate/truncate.
- * In those cases, all pages freed continously can be expected to be in
- * the same cgroup and we have chance to coalesce uncharges.
- * But we do uncharge one by one if this is killed by OOM(TIF_MEMDIE)
- * because we want to do uncharge as soon as possible.
- */
- if (!current->memcg_batch.do_batch || test_thread_flag(TIF_MEMDIE))
- goto direct_uncharge;
batch = ¤t->memcg_batch;
/*
@@ -2137,6 +2206,17 @@
if (!batch->memcg)
batch->memcg = mem;
/*
+ * do_batch > 0 when unmapping pages or inode invalidate/truncate.
+ * In those cases, all pages freed continously can be expected to be in
+ * the same cgroup and we have chance to coalesce uncharges.
+ * But we do uncharge one by one if this is killed by OOM(TIF_MEMDIE)
+ * because we want to do uncharge as soon as possible.
+ */
+
+ if (!batch->do_batch || test_thread_flag(TIF_MEMDIE))
+ goto direct_uncharge;
+
+ /*
* In typical case, batch->memcg == mem. This means we can
* merge a series of uncharges to an uncharge of res_counter.
* If not, we uncharge res_counter ony by one.
@@ -2152,6 +2232,8 @@
res_counter_uncharge(&mem->res, PAGE_SIZE);
if (uncharge_memsw)
res_counter_uncharge(&mem->memsw, PAGE_SIZE);
+ if (unlikely(batch->memcg != mem))
+ memcg_oom_recover(mem);
return;
}
@@ -2188,7 +2270,8 @@
switch (ctype) {
case MEM_CGROUP_CHARGE_TYPE_MAPPED:
case MEM_CGROUP_CHARGE_TYPE_DROP:
- if (page_mapped(page))
+ /* See mem_cgroup_prepare_migration() */
+ if (page_mapped(page) || PageCgroupMigration(pc))
goto unlock_out;
break;
case MEM_CGROUP_CHARGE_TYPE_SWAPOUT:
@@ -2288,6 +2371,7 @@
res_counter_uncharge(&batch->memcg->res, batch->bytes);
if (batch->memsw_bytes)
res_counter_uncharge(&batch->memcg->memsw, batch->memsw_bytes);
+ memcg_oom_recover(batch->memcg);
/* forget this pointer (for sanity check) */
batch->memcg = NULL;
}
@@ -2410,10 +2494,12 @@
* Before starting migration, account PAGE_SIZE to mem_cgroup that the old
* page belongs to.
*/
-int mem_cgroup_prepare_migration(struct page *page, struct mem_cgroup **ptr)
+int mem_cgroup_prepare_migration(struct page *page,
+ struct page *newpage, struct mem_cgroup **ptr)
{
struct page_cgroup *pc;
struct mem_cgroup *mem = NULL;
+ enum charge_type ctype;
int ret = 0;
if (mem_cgroup_disabled())
@@ -2424,69 +2510,125 @@
if (PageCgroupUsed(pc)) {
mem = pc->mem_cgroup;
css_get(&mem->css);
+ /*
+ * At migrating an anonymous page, its mapcount goes down
+ * to 0 and uncharge() will be called. But, even if it's fully
+ * unmapped, migration may fail and this page has to be
+ * charged again. We set MIGRATION flag here and delay uncharge
+ * until end_migration() is called
+ *
+ * Corner Case Thinking
+ * A)
+ * When the old page was mapped as Anon and it's unmap-and-freed
+ * while migration was ongoing.
+ * If unmap finds the old page, uncharge() of it will be delayed
+ * until end_migration(). If unmap finds a new page, it's
+ * uncharged when it make mapcount to be 1->0. If unmap code
+ * finds swap_migration_entry, the new page will not be mapped
+ * and end_migration() will find it(mapcount==0).
+ *
+ * B)
+ * When the old page was mapped but migraion fails, the kernel
+ * remaps it. A charge for it is kept by MIGRATION flag even
+ * if mapcount goes down to 0. We can do remap successfully
+ * without charging it again.
+ *
+ * C)
+ * The "old" page is under lock_page() until the end of
+ * migration, so, the old page itself will not be swapped-out.
+ * If the new page is swapped out before end_migraton, our
+ * hook to usual swap-out path will catch the event.
+ */
+ if (PageAnon(page))
+ SetPageCgroupMigration(pc);
}
unlock_page_cgroup(pc);
+ /*
+ * If the page is not charged at this point,
+ * we return here.
+ */
+ if (!mem)
+ return 0;
*ptr = mem;
- if (mem) {
- ret = __mem_cgroup_try_charge(NULL, GFP_KERNEL, ptr, false);
- css_put(&mem->css);
+ ret = __mem_cgroup_try_charge(NULL, GFP_KERNEL, ptr, false);
+ css_put(&mem->css);/* drop extra refcnt */
+ if (ret || *ptr == NULL) {
+ if (PageAnon(page)) {
+ lock_page_cgroup(pc);
+ ClearPageCgroupMigration(pc);
+ unlock_page_cgroup(pc);
+ /*
+ * The old page may be fully unmapped while we kept it.
+ */
+ mem_cgroup_uncharge_page(page);
+ }
+ return -ENOMEM;
}
+ /*
+ * We charge new page before it's used/mapped. So, even if unlock_page()
+ * is called before end_migration, we can catch all events on this new
+ * page. In the case new page is migrated but not remapped, new page's
+ * mapcount will be finally 0 and we call uncharge in end_migration().
+ */
+ pc = lookup_page_cgroup(newpage);
+ if (PageAnon(page))
+ ctype = MEM_CGROUP_CHARGE_TYPE_MAPPED;
+ else if (page_is_file_cache(page))
+ ctype = MEM_CGROUP_CHARGE_TYPE_CACHE;
+ else
+ ctype = MEM_CGROUP_CHARGE_TYPE_SHMEM;
+ __mem_cgroup_commit_charge(mem, pc, ctype);
return ret;
}
/* remove redundant charge if migration failed*/
void mem_cgroup_end_migration(struct mem_cgroup *mem,
- struct page *oldpage, struct page *newpage)
+ struct page *oldpage, struct page *newpage)
{
- struct page *target, *unused;
+ struct page *used, *unused;
struct page_cgroup *pc;
- enum charge_type ctype;
if (!mem)
return;
+ /* blocks rmdir() */
cgroup_exclude_rmdir(&mem->css);
/* at migration success, oldpage->mapping is NULL. */
if (oldpage->mapping) {
- target = oldpage;
- unused = NULL;
+ used = oldpage;
+ unused = newpage;
} else {
- target = newpage;
+ used = newpage;
unused = oldpage;
}
-
- if (PageAnon(target))
- ctype = MEM_CGROUP_CHARGE_TYPE_MAPPED;
- else if (page_is_file_cache(target))
- ctype = MEM_CGROUP_CHARGE_TYPE_CACHE;
- else
- ctype = MEM_CGROUP_CHARGE_TYPE_SHMEM;
-
- /* unused page is not on radix-tree now. */
- if (unused)
- __mem_cgroup_uncharge_common(unused, ctype);
-
- pc = lookup_page_cgroup(target);
/*
- * __mem_cgroup_commit_charge() check PCG_USED bit of page_cgroup.
- * So, double-counting is effectively avoided.
+ * We disallowed uncharge of pages under migration because mapcount
+ * of the page goes down to zero, temporarly.
+ * Clear the flag and check the page should be charged.
*/
- __mem_cgroup_commit_charge(mem, pc, ctype);
+ pc = lookup_page_cgroup(oldpage);
+ lock_page_cgroup(pc);
+ ClearPageCgroupMigration(pc);
+ unlock_page_cgroup(pc);
+ if (unused != oldpage)
+ pc = lookup_page_cgroup(unused);
+ __mem_cgroup_uncharge_common(unused, MEM_CGROUP_CHARGE_TYPE_FORCE);
+
+ pc = lookup_page_cgroup(used);
/*
- * Both of oldpage and newpage are still under lock_page().
- * Then, we don't have to care about race in radix-tree.
- * But we have to be careful that this page is unmapped or not.
- *
- * There is a case for !page_mapped(). At the start of
- * migration, oldpage was mapped. But now, it's zapped.
- * But we know *target* page is not freed/reused under us.
- * mem_cgroup_uncharge_page() does all necessary checks.
+ * If a page is a file cache, radix-tree replacement is very atomic
+ * and we can skip this check. When it was an Anon page, its mapcount
+ * goes down to 0. But because we added MIGRATION flage, it's not
+ * uncharged yet. There are several case but page->mapcount check
+ * and USED bit check in mem_cgroup_uncharge_page() will do enough
+ * check. (see prepare_charge() also)
*/
- if (ctype == MEM_CGROUP_CHARGE_TYPE_MAPPED)
- mem_cgroup_uncharge_page(target);
+ if (PageAnon(used))
+ mem_cgroup_uncharge_page(used);
/*
- * At migration, we may charge account against cgroup which has no tasks
+ * At migration, we may charge account against cgroup which has no
+ * tasks.
* So, rmdir()->pre_destroy() can be called while we do this charge.
* In that case, we need to call pre_destroy() again. check it here.
*/
@@ -2524,10 +2666,11 @@
unsigned long long val)
{
int retry_count;
- u64 memswlimit;
+ u64 memswlimit, memlimit;
int ret = 0;
int children = mem_cgroup_count_children(memcg);
u64 curusage, oldusage;
+ int enlarge;
/*
* For keeping hierarchical_reclaim simple, how long we should retry
@@ -2538,6 +2681,7 @@
oldusage = res_counter_read_u64(&memcg->res, RES_USAGE);
+ enlarge = 0;
while (retry_count) {
if (signal_pending(current)) {
ret = -EINTR;
@@ -2555,6 +2699,11 @@
mutex_unlock(&set_limit_mutex);
break;
}
+
+ memlimit = res_counter_read_u64(&memcg->res, RES_LIMIT);
+ if (memlimit < val)
+ enlarge = 1;
+
ret = res_counter_set_limit(&memcg->res, val);
if (!ret) {
if (memswlimit == val)
@@ -2576,6 +2725,8 @@
else
oldusage = curusage;
}
+ if (!ret && enlarge)
+ memcg_oom_recover(memcg);
return ret;
}
@@ -2584,9 +2735,10 @@
unsigned long long val)
{
int retry_count;
- u64 memlimit, oldusage, curusage;
+ u64 memlimit, memswlimit, oldusage, curusage;
int children = mem_cgroup_count_children(memcg);
int ret = -EBUSY;
+ int enlarge = 0;
/* see mem_cgroup_resize_res_limit */
retry_count = children * MEM_CGROUP_RECLAIM_RETRIES;
@@ -2608,6 +2760,9 @@
mutex_unlock(&set_limit_mutex);
break;
}
+ memswlimit = res_counter_read_u64(&memcg->memsw, RES_LIMIT);
+ if (memswlimit < val)
+ enlarge = 1;
ret = res_counter_set_limit(&memcg->memsw, val);
if (!ret) {
if (memlimit == val)
@@ -2630,6 +2785,8 @@
else
oldusage = curusage;
}
+ if (!ret && enlarge)
+ memcg_oom_recover(memcg);
return ret;
}
@@ -2821,6 +2978,7 @@
if (ret)
break;
}
+ memcg_oom_recover(mem);
/* it seems parent cgroup doesn't have enough mem */
if (ret == -ENOMEM)
goto try_to_free;
@@ -3311,9 +3469,9 @@
rcu_read_lock();
if (!swap)
- t = rcu_dereference(memcg->thresholds);
+ t = rcu_dereference(memcg->thresholds.primary);
else
- t = rcu_dereference(memcg->memsw_thresholds);
+ t = rcu_dereference(memcg->memsw_thresholds.primary);
if (!t)
goto unlock;
@@ -3325,7 +3483,7 @@
* If it's not true, a threshold was crossed after last
* call of __mem_cgroup_threshold().
*/
- i = atomic_read(&t->current_threshold);
+ i = t->current_threshold;
/*
* Iterate backward over array of thresholds starting from
@@ -3349,7 +3507,7 @@
eventfd_signal(t->entries[i].eventfd, 1);
/* Update current_threshold */
- atomic_set(&t->current_threshold, i - 1);
+ t->current_threshold = i - 1;
unlock:
rcu_read_unlock();
}
@@ -3369,106 +3527,117 @@
return _a->threshold - _b->threshold;
}
-static int mem_cgroup_register_event(struct cgroup *cgrp, struct cftype *cft,
- struct eventfd_ctx *eventfd, const char *args)
+static int mem_cgroup_oom_notify_cb(struct mem_cgroup *mem, void *data)
+{
+ struct mem_cgroup_eventfd_list *ev;
+
+ list_for_each_entry(ev, &mem->oom_notify, list)
+ eventfd_signal(ev->eventfd, 1);
+ return 0;
+}
+
+static void mem_cgroup_oom_notify(struct mem_cgroup *mem)
+{
+ mem_cgroup_walk_tree(mem, NULL, mem_cgroup_oom_notify_cb);
+}
+
+static int mem_cgroup_usage_register_event(struct cgroup *cgrp,
+ struct cftype *cft, struct eventfd_ctx *eventfd, const char *args)
{
struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
- struct mem_cgroup_threshold_ary *thresholds, *thresholds_new;
+ struct mem_cgroup_thresholds *thresholds;
+ struct mem_cgroup_threshold_ary *new;
int type = MEMFILE_TYPE(cft->private);
u64 threshold, usage;
- int size;
- int i, ret;
+ int i, size, ret;
ret = res_counter_memparse_write_strategy(args, &threshold);
if (ret)
return ret;
mutex_lock(&memcg->thresholds_lock);
+
if (type == _MEM)
- thresholds = memcg->thresholds;
+ thresholds = &memcg->thresholds;
else if (type == _MEMSWAP)
- thresholds = memcg->memsw_thresholds;
+ thresholds = &memcg->memsw_thresholds;
else
BUG();
usage = mem_cgroup_usage(memcg, type == _MEMSWAP);
/* Check if a threshold crossed before adding a new one */
- if (thresholds)
+ if (thresholds->primary)
__mem_cgroup_threshold(memcg, type == _MEMSWAP);
- if (thresholds)
- size = thresholds->size + 1;
- else
- size = 1;
+ size = thresholds->primary ? thresholds->primary->size + 1 : 1;
/* Allocate memory for new array of thresholds */
- thresholds_new = kmalloc(sizeof(*thresholds_new) +
- size * sizeof(struct mem_cgroup_threshold),
+ new = kmalloc(sizeof(*new) + size * sizeof(struct mem_cgroup_threshold),
GFP_KERNEL);
- if (!thresholds_new) {
+ if (!new) {
ret = -ENOMEM;
goto unlock;
}
- thresholds_new->size = size;
+ new->size = size;
/* Copy thresholds (if any) to new array */
- if (thresholds)
- memcpy(thresholds_new->entries, thresholds->entries,
- thresholds->size *
+ if (thresholds->primary) {
+ memcpy(new->entries, thresholds->primary->entries, (size - 1) *
sizeof(struct mem_cgroup_threshold));
+ }
+
/* Add new threshold */
- thresholds_new->entries[size - 1].eventfd = eventfd;
- thresholds_new->entries[size - 1].threshold = threshold;
+ new->entries[size - 1].eventfd = eventfd;
+ new->entries[size - 1].threshold = threshold;
/* Sort thresholds. Registering of new threshold isn't time-critical */
- sort(thresholds_new->entries, size,
- sizeof(struct mem_cgroup_threshold),
+ sort(new->entries, size, sizeof(struct mem_cgroup_threshold),
compare_thresholds, NULL);
/* Find current threshold */
- atomic_set(&thresholds_new->current_threshold, -1);
+ new->current_threshold = -1;
for (i = 0; i < size; i++) {
- if (thresholds_new->entries[i].threshold < usage) {
+ if (new->entries[i].threshold < usage) {
/*
- * thresholds_new->current_threshold will not be used
- * until rcu_assign_pointer(), so it's safe to increment
+ * new->current_threshold will not be used until
+ * rcu_assign_pointer(), so it's safe to increment
* it here.
*/
- atomic_inc(&thresholds_new->current_threshold);
+ ++new->current_threshold;
}
}
- if (type == _MEM)
- rcu_assign_pointer(memcg->thresholds, thresholds_new);
- else
- rcu_assign_pointer(memcg->memsw_thresholds, thresholds_new);
+ /* Free old spare buffer and save old primary buffer as spare */
+ kfree(thresholds->spare);
+ thresholds->spare = thresholds->primary;
- /* To be sure that nobody uses thresholds before freeing it */
+ rcu_assign_pointer(thresholds->primary, new);
+
+ /* To be sure that nobody uses thresholds */
synchronize_rcu();
- kfree(thresholds);
unlock:
mutex_unlock(&memcg->thresholds_lock);
return ret;
}
-static int mem_cgroup_unregister_event(struct cgroup *cgrp, struct cftype *cft,
- struct eventfd_ctx *eventfd)
+static void mem_cgroup_usage_unregister_event(struct cgroup *cgrp,
+ struct cftype *cft, struct eventfd_ctx *eventfd)
{
struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
- struct mem_cgroup_threshold_ary *thresholds, *thresholds_new;
+ struct mem_cgroup_thresholds *thresholds;
+ struct mem_cgroup_threshold_ary *new;
int type = MEMFILE_TYPE(cft->private);
u64 usage;
- int size = 0;
- int i, j, ret;
+ int i, j, size;
mutex_lock(&memcg->thresholds_lock);
if (type == _MEM)
- thresholds = memcg->thresholds;
+ thresholds = &memcg->thresholds;
else if (type == _MEMSWAP)
- thresholds = memcg->memsw_thresholds;
+ thresholds = &memcg->memsw_thresholds;
else
BUG();
@@ -3484,59 +3653,138 @@
__mem_cgroup_threshold(memcg, type == _MEMSWAP);
/* Calculate new number of threshold */
- for (i = 0; i < thresholds->size; i++) {
- if (thresholds->entries[i].eventfd != eventfd)
+ size = 0;
+ for (i = 0; i < thresholds->primary->size; i++) {
+ if (thresholds->primary->entries[i].eventfd != eventfd)
size++;
}
+ new = thresholds->spare;
+
/* Set thresholds array to NULL if we don't have thresholds */
if (!size) {
- thresholds_new = NULL;
- goto assign;
+ kfree(new);
+ new = NULL;
+ goto swap_buffers;
}
- /* Allocate memory for new array of thresholds */
- thresholds_new = kmalloc(sizeof(*thresholds_new) +
- size * sizeof(struct mem_cgroup_threshold),
- GFP_KERNEL);
- if (!thresholds_new) {
- ret = -ENOMEM;
- goto unlock;
- }
- thresholds_new->size = size;
+ new->size = size;
/* Copy thresholds and find current threshold */
- atomic_set(&thresholds_new->current_threshold, -1);
- for (i = 0, j = 0; i < thresholds->size; i++) {
- if (thresholds->entries[i].eventfd == eventfd)
+ new->current_threshold = -1;
+ for (i = 0, j = 0; i < thresholds->primary->size; i++) {
+ if (thresholds->primary->entries[i].eventfd == eventfd)
continue;
- thresholds_new->entries[j] = thresholds->entries[i];
- if (thresholds_new->entries[j].threshold < usage) {
+ new->entries[j] = thresholds->primary->entries[i];
+ if (new->entries[j].threshold < usage) {
/*
- * thresholds_new->current_threshold will not be used
+ * new->current_threshold will not be used
* until rcu_assign_pointer(), so it's safe to increment
* it here.
*/
- atomic_inc(&thresholds_new->current_threshold);
+ ++new->current_threshold;
}
j++;
}
-assign:
- if (type == _MEM)
- rcu_assign_pointer(memcg->thresholds, thresholds_new);
- else
- rcu_assign_pointer(memcg->memsw_thresholds, thresholds_new);
+swap_buffers:
+ /* Swap primary and spare array */
+ thresholds->spare = thresholds->primary;
+ rcu_assign_pointer(thresholds->primary, new);
- /* To be sure that nobody uses thresholds before freeing it */
+ /* To be sure that nobody uses thresholds */
synchronize_rcu();
- kfree(thresholds);
-unlock:
mutex_unlock(&memcg->thresholds_lock);
+}
- return ret;
+static int mem_cgroup_oom_register_event(struct cgroup *cgrp,
+ struct cftype *cft, struct eventfd_ctx *eventfd, const char *args)
+{
+ struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
+ struct mem_cgroup_eventfd_list *event;
+ int type = MEMFILE_TYPE(cft->private);
+
+ BUG_ON(type != _OOM_TYPE);
+ event = kmalloc(sizeof(*event), GFP_KERNEL);
+ if (!event)
+ return -ENOMEM;
+
+ mutex_lock(&memcg_oom_mutex);
+
+ event->eventfd = eventfd;
+ list_add(&event->list, &memcg->oom_notify);
+
+ /* already in OOM ? */
+ if (atomic_read(&memcg->oom_lock))
+ eventfd_signal(eventfd, 1);
+ mutex_unlock(&memcg_oom_mutex);
+
+ return 0;
+}
+
+static void mem_cgroup_oom_unregister_event(struct cgroup *cgrp,
+ struct cftype *cft, struct eventfd_ctx *eventfd)
+{
+ struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
+ struct mem_cgroup_eventfd_list *ev, *tmp;
+ int type = MEMFILE_TYPE(cft->private);
+
+ BUG_ON(type != _OOM_TYPE);
+
+ mutex_lock(&memcg_oom_mutex);
+
+ list_for_each_entry_safe(ev, tmp, &mem->oom_notify, list) {
+ if (ev->eventfd == eventfd) {
+ list_del(&ev->list);
+ kfree(ev);
+ }
+ }
+
+ mutex_unlock(&memcg_oom_mutex);
+}
+
+static int mem_cgroup_oom_control_read(struct cgroup *cgrp,
+ struct cftype *cft, struct cgroup_map_cb *cb)
+{
+ struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
+
+ cb->fill(cb, "oom_kill_disable", mem->oom_kill_disable);
+
+ if (atomic_read(&mem->oom_lock))
+ cb->fill(cb, "under_oom", 1);
+ else
+ cb->fill(cb, "under_oom", 0);
+ return 0;
+}
+
+/*
+ */
+static int mem_cgroup_oom_control_write(struct cgroup *cgrp,
+ struct cftype *cft, u64 val)
+{
+ struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
+ struct mem_cgroup *parent;
+
+ /* cannot set to root cgroup and only 0 and 1 are allowed */
+ if (!cgrp->parent || !((val == 0) || (val == 1)))
+ return -EINVAL;
+
+ parent = mem_cgroup_from_cont(cgrp->parent);
+
+ cgroup_lock();
+ /* oom-kill-disable is a flag for subhierarchy. */
+ if ((parent->use_hierarchy) ||
+ (mem->use_hierarchy && !list_empty(&cgrp->children))) {
+ cgroup_unlock();
+ return -EINVAL;
+ }
+ mem->oom_kill_disable = val;
+ if (!val)
+ memcg_oom_recover(mem);
+ cgroup_unlock();
+ return 0;
}
static struct cftype mem_cgroup_files[] = {
@@ -3544,8 +3792,8 @@
.name = "usage_in_bytes",
.private = MEMFILE_PRIVATE(_MEM, RES_USAGE),
.read_u64 = mem_cgroup_read,
- .register_event = mem_cgroup_register_event,
- .unregister_event = mem_cgroup_unregister_event,
+ .register_event = mem_cgroup_usage_register_event,
+ .unregister_event = mem_cgroup_usage_unregister_event,
},
{
.name = "max_usage_in_bytes",
@@ -3594,6 +3842,14 @@
.read_u64 = mem_cgroup_move_charge_read,
.write_u64 = mem_cgroup_move_charge_write,
},
+ {
+ .name = "oom_control",
+ .read_map = mem_cgroup_oom_control_read,
+ .write_u64 = mem_cgroup_oom_control_write,
+ .register_event = mem_cgroup_oom_register_event,
+ .unregister_event = mem_cgroup_oom_unregister_event,
+ .private = MEMFILE_PRIVATE(_OOM_TYPE, OOM_CONTROL),
+ },
};
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
@@ -3602,8 +3858,8 @@
.name = "memsw.usage_in_bytes",
.private = MEMFILE_PRIVATE(_MEMSWAP, RES_USAGE),
.read_u64 = mem_cgroup_read,
- .register_event = mem_cgroup_register_event,
- .unregister_event = mem_cgroup_unregister_event,
+ .register_event = mem_cgroup_usage_register_event,
+ .unregister_event = mem_cgroup_usage_unregister_event,
},
{
.name = "memsw.max_usage_in_bytes",
@@ -3831,6 +4087,7 @@
} else {
parent = mem_cgroup_from_cont(cont->parent);
mem->use_hierarchy = parent->use_hierarchy;
+ mem->oom_kill_disable = parent->oom_kill_disable;
}
if (parent && parent->use_hierarchy) {
@@ -3849,6 +4106,7 @@
}
mem->last_scanned_child = 0;
spin_lock_init(&mem->reclaim_param_lock);
+ INIT_LIST_HEAD(&mem->oom_notify);
if (parent)
mem->swappiness = get_swappiness(parent);
@@ -3976,6 +4234,80 @@
MC_TARGET_SWAP,
};
+static struct page *mc_handle_present_pte(struct vm_area_struct *vma,
+ unsigned long addr, pte_t ptent)
+{
+ struct page *page = vm_normal_page(vma, addr, ptent);
+
+ if (!page || !page_mapped(page))
+ return NULL;
+ if (PageAnon(page)) {
+ /* we don't move shared anon */
+ if (!move_anon() || page_mapcount(page) > 2)
+ return NULL;
+ } else if (!move_file())
+ /* we ignore mapcount for file pages */
+ return NULL;
+ if (!get_page_unless_zero(page))
+ return NULL;
+
+ return page;
+}
+
+static struct page *mc_handle_swap_pte(struct vm_area_struct *vma,
+ unsigned long addr, pte_t ptent, swp_entry_t *entry)
+{
+ int usage_count;
+ struct page *page = NULL;
+ swp_entry_t ent = pte_to_swp_entry(ptent);
+
+ if (!move_anon() || non_swap_entry(ent))
+ return NULL;
+ usage_count = mem_cgroup_count_swap_user(ent, &page);
+ if (usage_count > 1) { /* we don't move shared anon */
+ if (page)
+ put_page(page);
+ return NULL;
+ }
+ if (do_swap_account)
+ entry->val = ent.val;
+
+ return page;
+}
+
+static struct page *mc_handle_file_pte(struct vm_area_struct *vma,
+ unsigned long addr, pte_t ptent, swp_entry_t *entry)
+{
+ struct page *page = NULL;
+ struct inode *inode;
+ struct address_space *mapping;
+ pgoff_t pgoff;
+
+ if (!vma->vm_file) /* anonymous vma */
+ return NULL;
+ if (!move_file())
+ return NULL;
+
+ inode = vma->vm_file->f_path.dentry->d_inode;
+ mapping = vma->vm_file->f_mapping;
+ if (pte_none(ptent))
+ pgoff = linear_page_index(vma, addr);
+ else /* pte_file(ptent) is true */
+ pgoff = pte_to_pgoff(ptent);
+
+ /* page is moved even if it's not RSS of this task(page-faulted). */
+ if (!mapping_cap_swap_backed(mapping)) { /* normal file */
+ page = find_get_page(mapping, pgoff);
+ } else { /* shmem/tmpfs file. we should take account of swap too. */
+ swp_entry_t ent;
+ mem_cgroup_get_shmem_target(inode, pgoff, &page, &ent);
+ if (do_swap_account)
+ entry->val = ent.val;
+ }
+
+ return page;
+}
+
static int is_target_pte_for_mc(struct vm_area_struct *vma,
unsigned long addr, pte_t ptent, union mc_target *target)
{
@@ -3983,43 +4315,16 @@
struct page_cgroup *pc;
int ret = 0;
swp_entry_t ent = { .val = 0 };
- int usage_count = 0;
- bool move_anon = test_bit(MOVE_CHARGE_TYPE_ANON,
- &mc.to->move_charge_at_immigrate);
- if (!pte_present(ptent)) {
- /* TODO: handle swap of shmes/tmpfs */
- if (pte_none(ptent) || pte_file(ptent))
- return 0;
- else if (is_swap_pte(ptent)) {
- ent = pte_to_swp_entry(ptent);
- if (!move_anon || non_swap_entry(ent))
- return 0;
- usage_count = mem_cgroup_count_swap_user(ent, &page);
- }
- } else {
- page = vm_normal_page(vma, addr, ptent);
- if (!page || !page_mapped(page))
- return 0;
- /*
- * TODO: We don't move charges of file(including shmem/tmpfs)
- * pages for now.
- */
- if (!move_anon || !PageAnon(page))
- return 0;
- if (!get_page_unless_zero(page))
- return 0;
- usage_count = page_mapcount(page);
- }
- if (usage_count > 1) {
- /*
- * TODO: We don't move charges of shared(used by multiple
- * processes) pages for now.
- */
- if (page)
- put_page(page);
+ if (pte_present(ptent))
+ page = mc_handle_present_pte(vma, addr, ptent);
+ else if (is_swap_pte(ptent))
+ page = mc_handle_swap_pte(vma, addr, ptent, &ent);
+ else if (pte_none(ptent) || pte_file(ptent))
+ page = mc_handle_file_pte(vma, addr, ptent, &ent);
+
+ if (!page && !ent.val)
return 0;
- }
if (page) {
pc = lookup_page_cgroup(page);
/*
@@ -4035,8 +4340,8 @@
if (!ret || !target)
put_page(page);
}
- /* throught */
- if (ent.val && do_swap_account && !ret &&
+ /* There is a swap entry and a page doesn't exist or isn't charged */
+ if (ent.val && !ret &&
css_id(&mc.from->css) == lookup_swap_cgroup(ent)) {
ret = MC_TARGET_SWAP;
if (target)
@@ -4077,9 +4382,6 @@
};
if (is_vm_hugetlb_page(vma))
continue;
- /* TODO: We don't move charges of shmem/tmpfs pages for now. */
- if (vma->vm_flags & VM_SHARED)
- continue;
walk_page_range(vma->vm_start, vma->vm_end,
&mem_cgroup_count_precharge_walk);
}
@@ -4102,6 +4404,7 @@
if (mc.precharge) {
__mem_cgroup_cancel_charge(mc.to, mc.precharge);
mc.precharge = 0;
+ memcg_oom_recover(mc.to);
}
/*
* we didn't uncharge from mc.from at mem_cgroup_move_account(), so
@@ -4110,6 +4413,7 @@
if (mc.moved_charge) {
__mem_cgroup_cancel_charge(mc.from, mc.moved_charge);
mc.moved_charge = 0;
+ memcg_oom_recover(mc.from);
}
/* we must fixup refcnts and charges */
if (mc.moved_swap) {
@@ -4274,9 +4578,6 @@
};
if (is_vm_hugetlb_page(vma))
continue;
- /* TODO: We don't move charges of shmem/tmpfs pages for now. */
- if (vma->vm_flags & VM_SHARED)
- continue;
ret = walk_page_range(vma->vm_start, vma->vm_end,
&mem_cgroup_move_charge_walk);
if (ret)
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 7575101..5bc0a96 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2094,27 +2094,29 @@
NODEMASK_SCRATCH(scratch);
if (!scratch)
- return;
+ goto put_mpol;
/* contextualize the tmpfs mount point mempolicy */
new = mpol_new(mpol->mode, mpol->flags, &mpol->w.user_nodemask);
if (IS_ERR(new))
- goto put_free; /* no valid nodemask intersection */
+ goto free_scratch; /* no valid nodemask intersection */
task_lock(current);
ret = mpol_set_nodemask(new, &mpol->w.user_nodemask, scratch);
task_unlock(current);
- mpol_put(mpol); /* drop our ref on sb mpol */
if (ret)
- goto put_free;
+ goto put_new;
/* Create pseudo-vma that contains just the policy */
memset(&pvma, 0, sizeof(struct vm_area_struct));
pvma.vm_end = TASK_SIZE; /* policy covers entire file */
mpol_set_shared_policy(sp, &pvma, new); /* adds ref */
-put_free:
+put_new:
mpol_put(new); /* drop initial ref */
+free_scratch:
NODEMASK_SCRATCH_FREE(scratch);
+put_mpol:
+ mpol_put(mpol); /* drop our incoming ref on sb mpol */
}
}
diff --git a/mm/migrate.c b/mm/migrate.c
index 09e2471..4205b1d 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -590,7 +590,7 @@
}
/* charge against new page */
- charge = mem_cgroup_prepare_migration(page, &mem);
+ charge = mem_cgroup_prepare_migration(page, newpage, &mem);
if (charge == -ENOMEM) {
rc = -ENOMEM;
goto unlock;
diff --git a/mm/nommu.c b/mm/nommu.c
index 63fa17d..b76f3ee 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -918,14 +918,6 @@
if (!(capabilities & BDI_CAP_MAP_DIRECT))
return -ENODEV;
- if (((prot & PROT_READ) && !(capabilities & BDI_CAP_READ_MAP)) ||
- ((prot & PROT_WRITE) && !(capabilities & BDI_CAP_WRITE_MAP)) ||
- ((prot & PROT_EXEC) && !(capabilities & BDI_CAP_EXEC_MAP))
- ) {
- printk("MAP_SHARED not completely supported on !MMU\n");
- return -EINVAL;
- }
-
/* we mustn't privatise shared mappings */
capabilities &= ~BDI_CAP_MAP_COPY;
}
@@ -941,6 +933,20 @@
capabilities &= ~BDI_CAP_MAP_DIRECT;
}
+ if (capabilities & BDI_CAP_MAP_DIRECT) {
+ if (((prot & PROT_READ) && !(capabilities & BDI_CAP_READ_MAP)) ||
+ ((prot & PROT_WRITE) && !(capabilities & BDI_CAP_WRITE_MAP)) ||
+ ((prot & PROT_EXEC) && !(capabilities & BDI_CAP_EXEC_MAP))
+ ) {
+ capabilities &= ~BDI_CAP_MAP_DIRECT;
+ if (flags & MAP_SHARED) {
+ printk(KERN_WARNING
+ "MAP_SHARED not completely supported on !MMU\n");
+ return -EINVAL;
+ }
+ }
+ }
+
/* handle executable mappings and implied executable
* mappings */
if (file->f_path.mnt->mnt_flags & MNT_NOEXEC) {
@@ -996,22 +1002,20 @@
unsigned long vm_flags;
vm_flags = calc_vm_prot_bits(prot) | calc_vm_flag_bits(flags);
- vm_flags |= VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC;
/* vm_flags |= mm->def_flags; */
if (!(capabilities & BDI_CAP_MAP_DIRECT)) {
/* attempt to share read-only copies of mapped file chunks */
+ vm_flags |= VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC;
if (file && !(prot & PROT_WRITE))
vm_flags |= VM_MAYSHARE;
- }
- else {
+ } else {
/* overlay a shareable mapping on the backing device or inode
* if possible - used for chardevs, ramfs/tmpfs/shmfs and
* romfs/cramfs */
+ vm_flags |= VM_MAYSHARE | (capabilities & BDI_CAP_VMFLAGS);
if (flags & MAP_SHARED)
- vm_flags |= VM_MAYSHARE | VM_SHARED;
- else if ((((vm_flags & capabilities) ^ vm_flags) & BDI_CAP_VMFLAGS) == 0)
- vm_flags |= VM_MAYSHARE;
+ vm_flags |= VM_SHARED;
}
/* refuse to let anyone share private mappings with this process if
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index b68e802..709aedf 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -479,12 +479,9 @@
read_lock(&tasklist_lock);
retry:
p = select_bad_process(&points, mem);
- if (PTR_ERR(p) == -1UL)
+ if (!p || PTR_ERR(p) == -1UL)
goto out;
- if (!p)
- p = current;
-
if (oom_kill_process(p, gfp_mask, 0, points, mem,
"Memory cgroup out of memory"))
goto retry;
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index b289310..37498ef 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -495,7 +495,6 @@
for (;;) {
struct writeback_control wbc = {
- .bdi = bdi,
.sync_mode = WB_SYNC_NONE,
.older_than_this = NULL,
.nr_to_write = write_chunk,
@@ -537,7 +536,7 @@
* up.
*/
if (bdi_nr_reclaimable > bdi_thresh) {
- writeback_inodes_wbc(&wbc);
+ writeback_inodes_wb(&bdi->wb, &wbc);
pages_written += write_chunk - wbc.nr_to_write;
get_dirty_limits(&background_thresh, &dirty_thresh,
&bdi_thresh, bdi);
@@ -597,7 +596,7 @@
(!laptop_mode && ((global_page_state(NR_FILE_DIRTY)
+ global_page_state(NR_UNSTABLE_NFS))
> background_thresh)))
- bdi_start_writeback(bdi, NULL, 0, 0);
+ bdi_start_background_writeback(bdi);
}
void set_page_dirty_balance(struct page *page, int page_mkwrite)
@@ -705,9 +704,8 @@
* We want to write everything out, not just down to the dirty
* threshold
*/
-
if (bdi_has_dirty_io(&q->backing_dev_info))
- bdi_start_writeback(&q->backing_dev_info, NULL, nr_pages, 0);
+ bdi_start_writeback(&q->backing_dev_info, nr_pages);
}
/*
@@ -835,7 +833,6 @@
pgoff_t done_index;
int cycled;
int range_whole = 0;
- long nr_to_write = wbc->nr_to_write;
pagevec_init(&pvec, 0);
if (wbc->range_cyclic) {
@@ -852,7 +849,22 @@
if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
range_whole = 1;
cycled = 1; /* ignore range_cyclic tests */
+
+ /*
+ * If this is a data integrity sync, cap the writeback to the
+ * current end of file. Any extension to the file that occurs
+ * after this is a new write and we don't need to write those
+ * pages out to fulfil our data integrity requirements. If we
+ * try to write them out, we can get stuck in this scan until
+ * the concurrent writer stops adding dirty pages and extending
+ * EOF.
+ */
+ if (wbc->sync_mode == WB_SYNC_ALL &&
+ wbc->range_end == LLONG_MAX) {
+ end = i_size_read(mapping->host) >> PAGE_CACHE_SHIFT;
+ }
}
+
retry:
done_index = index;
while (!done && (index <= end)) {
@@ -935,11 +947,10 @@
done = 1;
break;
}
- }
+ }
- if (nr_to_write > 0) {
- nr_to_write--;
- if (nr_to_write == 0 &&
+ if (wbc->nr_to_write > 0) {
+ if (--wbc->nr_to_write == 0 &&
wbc->sync_mode == WB_SYNC_NONE) {
/*
* We stop writing back only if we are
@@ -970,11 +981,8 @@
end = writeback_index - 1;
goto retry;
}
- if (!wbc->no_nrwrite_index_update) {
- if (wbc->range_cyclic || (range_whole && nr_to_write > 0))
- mapping->writeback_index = done_index;
- wbc->nr_to_write = nr_to_write;
- }
+ if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0))
+ mapping->writeback_index = done_index;
return ret;
}
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 08b3499..9bd339e 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -57,6 +57,22 @@
#include <asm/div64.h>
#include "internal.h"
+#ifdef CONFIG_USE_PERCPU_NUMA_NODE_ID
+DEFINE_PER_CPU(int, numa_node);
+EXPORT_PER_CPU_SYMBOL(numa_node);
+#endif
+
+#ifdef CONFIG_HAVE_MEMORYLESS_NODES
+/*
+ * N.B., Do NOT reference the '_numa_mem_' per cpu variable directly.
+ * It will not be defined when CONFIG_HAVE_MEMORYLESS_NODES is not defined.
+ * Use the accessor functions set_numa_mem(), numa_mem_id() and cpu_to_mem()
+ * defined in <linux/topology.h>.
+ */
+DEFINE_PER_CPU(int, _numa_mem_); /* Kernel "local memory" node */
+EXPORT_PER_CPU_SYMBOL(_numa_mem_);
+#endif
+
/*
* Array of node states.
*/
@@ -2856,6 +2872,24 @@
zlc->z_to_n[z - zonelist->_zonerefs] = zonelist_node_idx(z);
}
+#ifdef CONFIG_HAVE_MEMORYLESS_NODES
+/*
+ * Return node id of node used for "local" allocations.
+ * I.e., first node id of first zone in arg node's generic zonelist.
+ * Used for initializing percpu 'numa_mem', which is used primarily
+ * for kernel allocations, so use GFP_KERNEL flags to locate zonelist.
+ */
+int local_memory_node(int node)
+{
+ struct zone *zone;
+
+ (void)first_zones_zonelist(node_zonelist(node, GFP_KERNEL),
+ gfp_zone(GFP_KERNEL),
+ NULL,
+ &zone);
+ return zone->node;
+}
+#endif
#else /* CONFIG_NUMA */
@@ -2970,9 +3004,23 @@
* needs the percpu allocator in order to allocate its pagesets
* (a chicken-egg dilemma).
*/
- for_each_possible_cpu(cpu)
+ for_each_possible_cpu(cpu) {
setup_pageset(&per_cpu(boot_pageset, cpu), 0);
+#ifdef CONFIG_HAVE_MEMORYLESS_NODES
+ /*
+ * We now know the "local memory node" for each node--
+ * i.e., the node of the first zone in the generic zonelist.
+ * Set up numa_mem percpu variable for on-line cpus. During
+ * boot, only the boot cpu should be on-line; we'll init the
+ * secondary cpus' numa_mem as they come on-line. During
+ * node/memory hotplug, we'll fixup all on-line cpus.
+ */
+ if (cpu_online(cpu))
+ set_cpu_numa_mem(cpu, local_memory_node(cpu_to_node(cpu)));
+#endif
+ }
+
return 0;
}
@@ -3586,6 +3634,9 @@
int i;
void *ptr;
+ if (limit > get_max_mapped())
+ limit = get_max_mapped();
+
/* need to go over early_node_map to find out good range for node */
for_each_active_range_index_in_nid(i, nid) {
u64 addr;
@@ -3611,6 +3662,11 @@
ptr = phys_to_virt(addr);
memset(ptr, 0, size);
reserve_early_without_check(addr, addr + size, "BOOTMEM");
+ /*
+ * The min_count is set to 0 so that bootmem allocated blocks
+ * are never reported as leaks.
+ */
+ kmemleak_alloc(ptr, size, 0, 0);
return ptr;
}
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 6c00814..5bffada 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -9,6 +9,7 @@
#include <linux/vmalloc.h>
#include <linux/cgroup.h>
#include <linux/swapops.h>
+#include <linux/kmemleak.h>
static void __meminit
__init_page_cgroup(struct page_cgroup *pc, unsigned long pfn)
@@ -126,6 +127,12 @@
if (!base)
base = vmalloc(table_size);
}
+ /*
+ * The value stored in section->page_cgroup is (base - pfn)
+ * and it does not point to the memory block allocated above,
+ * causing kmemleak false positives.
+ */
+ kmemleak_not_leak(base);
} else {
/*
* We don't have to allocate page_cgroup again, but
diff --git a/mm/percpu.c b/mm/percpu.c
index 39f7dfd..6470e77 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -229,8 +229,8 @@
return pcpu_unit_map[cpu] * pcpu_unit_pages + page_idx;
}
-static unsigned long __maybe_unused pcpu_chunk_addr(struct pcpu_chunk *chunk,
- unsigned int cpu, int page_idx)
+static unsigned long pcpu_chunk_addr(struct pcpu_chunk *chunk,
+ unsigned int cpu, int page_idx)
{
return (unsigned long)chunk->base_addr + pcpu_unit_offsets[cpu] +
(page_idx << PAGE_SHIFT);
@@ -978,7 +978,32 @@
*/
phys_addr_t per_cpu_ptr_to_phys(void *addr)
{
- if (pcpu_addr_in_first_chunk(addr)) {
+ void __percpu *base = __addr_to_pcpu_ptr(pcpu_base_addr);
+ bool in_first_chunk = false;
+ unsigned long first_start, first_end;
+ unsigned int cpu;
+
+ /*
+ * The following test on first_start/end isn't strictly
+ * necessary but will speed up lookups of addresses which
+ * aren't in the first chunk.
+ */
+ first_start = pcpu_chunk_addr(pcpu_first_chunk, pcpu_first_unit_cpu, 0);
+ first_end = pcpu_chunk_addr(pcpu_first_chunk, pcpu_last_unit_cpu,
+ pcpu_unit_pages);
+ if ((unsigned long)addr >= first_start &&
+ (unsigned long)addr < first_end) {
+ for_each_possible_cpu(cpu) {
+ void *start = per_cpu_ptr(base, cpu);
+
+ if (addr >= start && addr < start + pcpu_unit_size) {
+ in_first_chunk = true;
+ break;
+ }
+ }
+ }
+
+ if (in_first_chunk) {
if ((unsigned long)addr < VMALLOC_START ||
(unsigned long)addr >= VMALLOC_END)
return __pa(addr);
@@ -1086,7 +1111,7 @@
static int group_map[NR_CPUS] __initdata;
static int group_cnt[NR_CPUS] __initdata;
const size_t static_size = __per_cpu_end - __per_cpu_start;
- int group_cnt_max = 0, nr_groups = 1, nr_units = 0;
+ int nr_groups = 1, nr_units = 0;
size_t size_sum, min_unit_size, alloc_size;
int upa, max_upa, uninitialized_var(best_upa); /* units_per_alloc */
int last_allocs, group, unit;
@@ -1096,7 +1121,7 @@
/* this function may be called multiple times */
memset(group_map, 0, sizeof(group_map));
- memset(group_cnt, 0, sizeof(group_map));
+ memset(group_cnt, 0, sizeof(group_cnt));
/*
* Determine min_unit_size, alloc_size and max_upa such that
@@ -1130,7 +1155,6 @@
}
group_map[cpu] = group;
group_cnt[group]++;
- group_cnt_max = max(group_cnt_max, group_cnt[group]);
}
/*
diff --git a/mm/shmem.c b/mm/shmem.c
index 4ef9797..f65f840 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -727,10 +727,11 @@
if (inode->i_mapping->nrpages && (info->flags & SHMEM_PAGEIN)) {
/*
* Call truncate_inode_pages again: racing shmem_unuse_inode
- * may have swizzled a page in from swap since vmtruncate or
- * generic_delete_inode did it, before we lowered next_index.
- * Also, though shmem_getpage checks i_size before adding to
- * cache, no recheck after: so fix the narrow window there too.
+ * may have swizzled a page in from swap since
+ * truncate_pagecache or generic_delete_inode did it, before we
+ * lowered next_index. Also, though shmem_getpage checks
+ * i_size before adding to cache, no recheck after: so fix the
+ * narrow window there too.
*
* Recalling truncate_inode_pages_range and unmap_mapping_range
* every time for punch_hole (which never got a chance to clear
@@ -760,19 +761,17 @@
}
}
-static void shmem_truncate(struct inode *inode)
-{
- shmem_truncate_range(inode, inode->i_size, (loff_t)-1);
-}
-
static int shmem_notify_change(struct dentry *dentry, struct iattr *attr)
{
struct inode *inode = dentry->d_inode;
- struct page *page = NULL;
+ loff_t newsize = attr->ia_size;
int error;
- if (S_ISREG(inode->i_mode) && (attr->ia_valid & ATTR_SIZE)) {
- if (attr->ia_size < inode->i_size) {
+ if (S_ISREG(inode->i_mode) && (attr->ia_valid & ATTR_SIZE)
+ && newsize != inode->i_size) {
+ struct page *page = NULL;
+
+ if (newsize < inode->i_size) {
/*
* If truncating down to a partial page, then
* if that page is already allocated, hold it
@@ -780,9 +779,9 @@
* truncate_partial_page cannnot miss it were
* it assigned to swap.
*/
- if (attr->ia_size & (PAGE_CACHE_SIZE-1)) {
+ if (newsize & (PAGE_CACHE_SIZE-1)) {
(void) shmem_getpage(inode,
- attr->ia_size>>PAGE_CACHE_SHIFT,
+ newsize >> PAGE_CACHE_SHIFT,
&page, SGP_READ, NULL);
if (page)
unlock_page(page);
@@ -794,24 +793,29 @@
* if it's being fully truncated to zero-length: the
* nrpages check is efficient enough in that case.
*/
- if (attr->ia_size) {
+ if (newsize) {
struct shmem_inode_info *info = SHMEM_I(inode);
spin_lock(&info->lock);
info->flags &= ~SHMEM_PAGEIN;
spin_unlock(&info->lock);
}
}
+
+ error = simple_setsize(inode, newsize);
+ if (page)
+ page_cache_release(page);
+ if (error)
+ return error;
+ shmem_truncate_range(inode, newsize, (loff_t)-1);
}
error = inode_change_ok(inode, attr);
if (!error)
- error = inode_setattr(inode, attr);
+ generic_setattr(inode, attr);
#ifdef CONFIG_TMPFS_POSIX_ACL
if (!error && (attr->ia_valid & ATTR_MODE))
error = generic_acl_chmod(inode);
#endif
- if (page)
- page_cache_release(page);
return error;
}
@@ -819,11 +823,11 @@
{
struct shmem_inode_info *info = SHMEM_I(inode);
- if (inode->i_op->truncate == shmem_truncate) {
+ if (inode->i_mapping->a_ops == &shmem_aops) {
truncate_inode_pages(inode->i_mapping, 0);
shmem_unacct_size(info->flags, inode->i_size);
inode->i_size = 0;
- shmem_truncate(inode);
+ shmem_truncate_range(inode, 0, (loff_t)-1);
if (!list_empty(&info->swaplist)) {
mutex_lock(&shmem_swaplist_mutex);
list_del_init(&info->swaplist);
@@ -2022,7 +2026,6 @@
};
static const struct inode_operations shmem_symlink_inode_operations = {
- .truncate = shmem_truncate,
.readlink = generic_readlink,
.follow_link = shmem_follow_link,
.put_link = shmem_put_link,
@@ -2433,14 +2436,13 @@
.write = do_sync_write,
.aio_read = shmem_file_aio_read,
.aio_write = generic_file_aio_write,
- .fsync = simple_sync_file,
+ .fsync = noop_fsync,
.splice_read = generic_file_splice_read,
.splice_write = generic_file_splice_write,
#endif
};
static const struct inode_operations shmem_inode_operations = {
- .truncate = shmem_truncate,
.setattr = shmem_notify_change,
.truncate_range = shmem_truncate_range,
#ifdef CONFIG_TMPFS_POSIX_ACL
@@ -2559,6 +2561,45 @@
return error;
}
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
+/**
+ * mem_cgroup_get_shmem_target - find a page or entry assigned to the shmem file
+ * @inode: the inode to be searched
+ * @pgoff: the offset to be searched
+ * @pagep: the pointer for the found page to be stored
+ * @ent: the pointer for the found swap entry to be stored
+ *
+ * If a page is found, refcount of it is incremented. Callers should handle
+ * these refcount.
+ */
+void mem_cgroup_get_shmem_target(struct inode *inode, pgoff_t pgoff,
+ struct page **pagep, swp_entry_t *ent)
+{
+ swp_entry_t entry = { .val = 0 }, *ptr;
+ struct page *page = NULL;
+ struct shmem_inode_info *info = SHMEM_I(inode);
+
+ if ((pgoff << PAGE_CACHE_SHIFT) >= i_size_read(inode))
+ goto out;
+
+ spin_lock(&info->lock);
+ ptr = shmem_swp_entry(info, pgoff, NULL);
+#ifdef CONFIG_SWAP
+ if (ptr && ptr->val) {
+ entry.val = ptr->val;
+ page = find_get_page(&swapper_space, entry.val);
+ } else
+#endif
+ page = find_get_page(inode->i_mapping, pgoff);
+ if (ptr)
+ shmem_swp_unmap(ptr);
+ spin_unlock(&info->lock);
+out:
+ *pagep = page;
+ *ent = entry;
+}
+#endif
+
#else /* !CONFIG_SHMEM */
/*
@@ -2598,6 +2639,31 @@
return 0;
}
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
+/**
+ * mem_cgroup_get_shmem_target - find a page or entry assigned to the shmem file
+ * @inode: the inode to be searched
+ * @pgoff: the offset to be searched
+ * @pagep: the pointer for the found page to be stored
+ * @ent: the pointer for the found swap entry to be stored
+ *
+ * If a page is found, refcount of it is incremented. Callers should handle
+ * these refcount.
+ */
+void mem_cgroup_get_shmem_target(struct inode *inode, pgoff_t pgoff,
+ struct page **pagep, swp_entry_t *ent)
+{
+ struct page *page = NULL;
+
+ if ((pgoff << PAGE_CACHE_SHIFT) >= i_size_read(inode))
+ goto out;
+ page = find_get_page(inode->i_mapping, pgoff);
+out:
+ *pagep = page;
+ *ent = (swp_entry_t){ .val = 0 };
+}
+#endif
+
#define shmem_vm_ops generic_file_vm_ops
#define shmem_file_operations ramfs_file_operations
#define shmem_get_inode(sb, dir, mode, dev, flags) ramfs_get_inode(sb, dir, mode, dev)
diff --git a/mm/slab.c b/mm/slab.c
index 02786e1..e49f8f4 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -821,7 +821,7 @@
{
int node;
- node = next_node(cpu_to_node(cpu), node_online_map);
+ node = next_node(cpu_to_mem(cpu), node_online_map);
if (node == MAX_NUMNODES)
node = first_node(node_online_map);
@@ -1050,7 +1050,7 @@
struct array_cache *alien = NULL;
int node;
- node = numa_node_id();
+ node = numa_mem_id();
/*
* Make sure we are not freeing a object from another node to the array
@@ -1129,7 +1129,7 @@
{
struct kmem_cache *cachep;
struct kmem_list3 *l3 = NULL;
- int node = cpu_to_node(cpu);
+ int node = cpu_to_mem(cpu);
const struct cpumask *mask = cpumask_of_node(node);
list_for_each_entry(cachep, &cache_chain, next) {
@@ -1194,7 +1194,7 @@
{
struct kmem_cache *cachep;
struct kmem_list3 *l3 = NULL;
- int node = cpu_to_node(cpu);
+ int node = cpu_to_mem(cpu);
int err;
/*
@@ -1321,7 +1321,7 @@
mutex_unlock(&cache_chain_mutex);
break;
}
- return err ? NOTIFY_BAD : NOTIFY_OK;
+ return notifier_from_errno(err);
}
static struct notifier_block __cpuinitdata cpucache_notifier = {
@@ -1479,7 +1479,7 @@
* 6) Resize the head arrays of the kmalloc caches to their final sizes.
*/
- node = numa_node_id();
+ node = numa_mem_id();
/* 1) create the cache_cache */
INIT_LIST_HEAD(&cache_chain);
@@ -2121,7 +2121,7 @@
}
}
}
- cachep->nodelists[numa_node_id()]->next_reap =
+ cachep->nodelists[numa_mem_id()]->next_reap =
jiffies + REAPTIMEOUT_LIST3 +
((unsigned long)cachep) % REAPTIMEOUT_LIST3;
@@ -2452,7 +2452,7 @@
{
#ifdef CONFIG_SMP
check_irq_off();
- assert_spin_locked(&cachep->nodelists[numa_node_id()]->list_lock);
+ assert_spin_locked(&cachep->nodelists[numa_mem_id()]->list_lock);
#endif
}
@@ -2479,7 +2479,7 @@
{
struct kmem_cache *cachep = arg;
struct array_cache *ac;
- int node = numa_node_id();
+ int node = numa_mem_id();
check_irq_off();
ac = cpu_cache_get(cachep);
@@ -3012,7 +3012,7 @@
retry:
check_irq_off();
- node = numa_node_id();
+ node = numa_mem_id();
ac = cpu_cache_get(cachep);
batchcount = ac->batchcount;
if (!ac->touched && batchcount > BATCHREFILL_LIMIT) {
@@ -3216,10 +3216,10 @@
if (in_interrupt() || (flags & __GFP_THISNODE))
return NULL;
- nid_alloc = nid_here = numa_node_id();
+ nid_alloc = nid_here = numa_mem_id();
get_mems_allowed();
if (cpuset_do_slab_mem_spread() && (cachep->flags & SLAB_MEM_SPREAD))
- nid_alloc = cpuset_mem_spread_node();
+ nid_alloc = cpuset_slab_spread_node();
else if (current->mempolicy)
nid_alloc = slab_node(current->mempolicy);
put_mems_allowed();
@@ -3281,7 +3281,7 @@
if (local_flags & __GFP_WAIT)
local_irq_enable();
kmem_flagcheck(cache, flags);
- obj = kmem_getpages(cache, local_flags, numa_node_id());
+ obj = kmem_getpages(cache, local_flags, numa_mem_id());
if (local_flags & __GFP_WAIT)
local_irq_disable();
if (obj) {
@@ -3389,6 +3389,7 @@
{
unsigned long save_flags;
void *ptr;
+ int slab_node = numa_mem_id();
flags &= gfp_allowed_mask;
@@ -3401,7 +3402,7 @@
local_irq_save(save_flags);
if (nodeid == -1)
- nodeid = numa_node_id();
+ nodeid = slab_node;
if (unlikely(!cachep->nodelists[nodeid])) {
/* Node not bootstrapped yet */
@@ -3409,7 +3410,7 @@
goto out;
}
- if (nodeid == numa_node_id()) {
+ if (nodeid == slab_node) {
/*
* Use the locally cached objects if possible.
* However ____cache_alloc does not allow fallback
@@ -3453,8 +3454,8 @@
* We may just have run out of memory on the local node.
* ____cache_alloc_node() knows how to locate memory on other nodes
*/
- if (!objp)
- objp = ____cache_alloc_node(cache, flags, numa_node_id());
+ if (!objp)
+ objp = ____cache_alloc_node(cache, flags, numa_mem_id());
out:
return objp;
@@ -3551,7 +3552,7 @@
{
int batchcount;
struct kmem_list3 *l3;
- int node = numa_node_id();
+ int node = numa_mem_id();
batchcount = ac->batchcount;
#if DEBUG
@@ -3985,7 +3986,7 @@
return -ENOMEM;
for_each_online_cpu(i) {
- new->new[i] = alloc_arraycache(cpu_to_node(i), limit,
+ new->new[i] = alloc_arraycache(cpu_to_mem(i), limit,
batchcount, gfp);
if (!new->new[i]) {
for (i--; i >= 0; i--)
@@ -4007,9 +4008,9 @@
struct array_cache *ccold = new->new[i];
if (!ccold)
continue;
- spin_lock_irq(&cachep->nodelists[cpu_to_node(i)]->list_lock);
- free_block(cachep, ccold->entry, ccold->avail, cpu_to_node(i));
- spin_unlock_irq(&cachep->nodelists[cpu_to_node(i)]->list_lock);
+ spin_lock_irq(&cachep->nodelists[cpu_to_mem(i)]->list_lock);
+ free_block(cachep, ccold->entry, ccold->avail, cpu_to_mem(i));
+ spin_unlock_irq(&cachep->nodelists[cpu_to_mem(i)]->list_lock);
kfree(ccold);
}
kfree(new);
@@ -4115,7 +4116,7 @@
{
struct kmem_cache *searchp;
struct kmem_list3 *l3;
- int node = numa_node_id();
+ int node = numa_mem_id();
struct delayed_work *work = to_delayed_work(w);
if (!mutex_trylock(&cache_chain_mutex))
diff --git a/mm/slub.c b/mm/slub.c
index 26f0cb9..578f68f 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2137,7 +2137,7 @@
for_each_node_state(node, N_NORMAL_MEMORY) {
struct kmem_cache_node *n = s->node[node];
- if (n && n != &s->local_node)
+ if (n)
kmem_cache_free(kmalloc_caches, n);
s->node[node] = NULL;
}
@@ -2146,33 +2146,22 @@
static int init_kmem_cache_nodes(struct kmem_cache *s, gfp_t gfpflags)
{
int node;
- int local_node;
-
- if (slab_state >= UP && (s < kmalloc_caches ||
- s >= kmalloc_caches + KMALLOC_CACHES))
- local_node = page_to_nid(virt_to_page(s));
- else
- local_node = 0;
for_each_node_state(node, N_NORMAL_MEMORY) {
struct kmem_cache_node *n;
- if (local_node == node)
- n = &s->local_node;
- else {
- if (slab_state == DOWN) {
- early_kmem_cache_node_alloc(gfpflags, node);
- continue;
- }
- n = kmem_cache_alloc_node(kmalloc_caches,
- gfpflags, node);
-
- if (!n) {
- free_kmem_cache_nodes(s);
- return 0;
- }
-
+ if (slab_state == DOWN) {
+ early_kmem_cache_node_alloc(gfpflags, node);
+ continue;
}
+ n = kmem_cache_alloc_node(kmalloc_caches,
+ gfpflags, node);
+
+ if (!n) {
+ free_kmem_cache_nodes(s);
+ return 0;
+ }
+
s->node[node] = n;
init_kmem_cache_node(n, s);
}
diff --git a/mm/swap.c b/mm/swap.c
index 7cd60bf..3ce7bc3 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -224,6 +224,7 @@
____pagevec_lru_add(pvec, lru);
put_cpu_var(lru_add_pvecs);
}
+EXPORT_SYMBOL(__lru_cache_add);
/**
* lru_cache_add_lru - add a page to a page list
diff --git a/mm/truncate.c b/mm/truncate.c
index f42675a..937571b 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -548,18 +548,18 @@
* NOTE! We have to be ready to update the memory sharing
* between the file and the memory map for a potential last
* incomplete page. Ugly, but necessary.
+ *
+ * This function is deprecated and simple_setsize or truncate_pagecache
+ * should be used instead.
*/
int vmtruncate(struct inode *inode, loff_t offset)
{
- loff_t oldsize;
int error;
- error = inode_newsize_ok(inode, offset);
+ error = simple_setsize(inode, offset);
if (error)
return error;
- oldsize = inode->i_size;
- i_size_write(inode, offset);
- truncate_pagecache(inode, oldsize, offset);
+
if (inode->i_op->truncate)
inode->i_op->truncate(inode);
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 915dceb..b94fe1b 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -213,8 +213,9 @@
list_for_each_entry(shrinker, &shrinker_list, list) {
unsigned long long delta;
unsigned long total_scan;
- unsigned long max_pass = (*shrinker->shrink)(0, gfp_mask);
+ unsigned long max_pass;
+ max_pass = (*shrinker->shrink)(shrinker, 0, gfp_mask);
delta = (4 * scanned) / shrinker->seeks;
delta *= max_pass;
do_div(delta, lru_pages + 1);
@@ -242,8 +243,9 @@
int shrink_ret;
int nr_before;
- nr_before = (*shrinker->shrink)(0, gfp_mask);
- shrink_ret = (*shrinker->shrink)(this_scan, gfp_mask);
+ nr_before = (*shrinker->shrink)(shrinker, 0, gfp_mask);
+ shrink_ret = (*shrinker->shrink)(shrinker, this_scan,
+ gfp_mask);
if (shrink_ret == -1)
break;
if (shrink_ret < nr_before)
@@ -296,7 +298,7 @@
static void handle_write_error(struct address_space *mapping,
struct page *page, int error)
{
- lock_page(page);
+ lock_page_nosync(page);
if (page_mapping(page) == mapping)
mapping_set_error(mapping, error);
unlock_page(page);
@@ -1724,13 +1726,13 @@
* If a zone is deemed to be full of pinned pages then just give it a light
* scan then give up on it.
*/
-static int shrink_zones(int priority, struct zonelist *zonelist,
+static bool shrink_zones(int priority, struct zonelist *zonelist,
struct scan_control *sc)
{
enum zone_type high_zoneidx = gfp_zone(sc->gfp_mask);
struct zoneref *z;
struct zone *zone;
- int progress = 0;
+ bool all_unreclaimable = true;
for_each_zone_zonelist_nodemask(zone, z, zonelist, high_zoneidx,
sc->nodemask) {
@@ -1757,9 +1759,9 @@
}
shrink_zone(priority, zone, sc);
- progress = 1;
+ all_unreclaimable = false;
}
- return progress;
+ return all_unreclaimable;
}
/*
@@ -1782,7 +1784,7 @@
struct scan_control *sc)
{
int priority;
- unsigned long ret = 0;
+ bool all_unreclaimable;
unsigned long total_scanned = 0;
struct reclaim_state *reclaim_state = current->reclaim_state;
unsigned long lru_pages = 0;
@@ -1813,7 +1815,7 @@
sc->nr_scanned = 0;
if (!priority)
disable_swap_token();
- ret = shrink_zones(priority, zonelist, sc);
+ all_unreclaimable = shrink_zones(priority, zonelist, sc);
/*
* Don't shrink slabs when reclaiming memory from
* over limit cgroups
@@ -1826,10 +1828,8 @@
}
}
total_scanned += sc->nr_scanned;
- if (sc->nr_reclaimed >= sc->nr_to_reclaim) {
- ret = sc->nr_reclaimed;
+ if (sc->nr_reclaimed >= sc->nr_to_reclaim)
goto out;
- }
/*
* Try to write back as many pages as we just scanned. This
@@ -1849,9 +1849,7 @@
priority < DEF_PRIORITY - 2)
congestion_wait(BLK_RW_ASYNC, HZ/10);
}
- /* top priority shrink_zones still had more to do? don't OOM, then */
- if (ret && scanning_global_lru(sc))
- ret = sc->nr_reclaimed;
+
out:
/*
* Now that we've scanned all the zones at this priority level, note
@@ -1877,7 +1875,14 @@
delayacct_freepages_end();
put_mems_allowed();
- return ret;
+ if (sc->nr_reclaimed)
+ return sc->nr_reclaimed;
+
+ /* top priority shrink_zones still had more to do? don't OOM, then */
+ if (scanning_global_lru(sc) && !all_unreclaimable)
+ return 1;
+
+ return 0;
}
unsigned long try_to_free_pages(struct zonelist *zonelist, int order,
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index bd537fc..50f58f5 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -12,7 +12,7 @@
return NET_RX_DROP;
if (skb_bond_should_drop(skb, ACCESS_ONCE(skb->dev->master)))
- goto drop;
+ skb->deliver_no_wcard = 1;
skb->skb_iif = skb->dev->ifindex;
__vlan_hwaccel_put_tag(skb, vlan_tci);
@@ -84,7 +84,7 @@
struct sk_buff *p;
if (skb_bond_should_drop(skb, ACCESS_ONCE(skb->dev->master)))
- goto drop;
+ skb->deliver_no_wcard = 1;
skb->skb_iif = skb->dev->ifindex;
__vlan_hwaccel_put_tag(skb, vlan_tci);
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 55be908..5298426 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -708,7 +708,8 @@
netif_carrier_off(dev);
/* IFF_BROADCAST|IFF_MULTICAST; ??? */
- dev->flags = real_dev->flags & ~(IFF_UP | IFF_PROMISC | IFF_ALLMULTI);
+ dev->flags = real_dev->flags & ~(IFF_UP | IFF_PROMISC | IFF_ALLMULTI |
+ IFF_MASTER | IFF_SLAVE);
dev->iflink = real_dev->ifindex;
dev->state = (real_dev->state & ((1<<__LINK_STATE_NOCARRIER) |
(1<<__LINK_STATE_DORMANT))) |
diff --git a/net/bluetooth/bnep/netdev.c b/net/bluetooth/bnep/netdev.c
index 0faad5c..8c100c9 100644
--- a/net/bluetooth/bnep/netdev.c
+++ b/net/bluetooth/bnep/netdev.c
@@ -104,6 +104,8 @@
break;
memcpy(__skb_put(skb, ETH_ALEN), ha->addr, ETH_ALEN);
memcpy(__skb_put(skb, ETH_ALEN), ha->addr, ETH_ALEN);
+
+ i++;
}
r->len = htons(skb->len - len);
}
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index b10e3cd..800b6b9 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -358,6 +358,11 @@
acl->sec_level = sec_level;
acl->auth_type = auth_type;
hci_acl_connect(acl);
+ } else {
+ if (acl->sec_level < sec_level)
+ acl->sec_level = sec_level;
+ if (acl->auth_type < auth_type)
+ acl->auth_type = auth_type;
}
if (type == ACL_LINK)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 6c57fc7..786b5de 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1049,6 +1049,8 @@
if (conn) {
if (!ev->status)
conn->link_mode |= HCI_LM_AUTH;
+ else
+ conn->sec_level = BT_SECURITY_LOW;
clear_bit(HCI_CONN_AUTH_PEND, &conn->pend);
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 1b682a5..cf3c407 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -401,6 +401,11 @@
l2cap_send_sframe(pi, control);
}
+static inline int __l2cap_no_conn_pending(struct sock *sk)
+{
+ return !(l2cap_pi(sk)->conf_state & L2CAP_CONF_CONNECT_PEND);
+}
+
static void l2cap_do_start(struct sock *sk)
{
struct l2cap_conn *conn = l2cap_pi(sk)->conn;
@@ -409,12 +414,13 @@
if (!(conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_DONE))
return;
- if (l2cap_check_security(sk)) {
+ if (l2cap_check_security(sk) && __l2cap_no_conn_pending(sk)) {
struct l2cap_conn_req req;
req.scid = cpu_to_le16(l2cap_pi(sk)->scid);
req.psm = l2cap_pi(sk)->psm;
l2cap_pi(sk)->ident = l2cap_get_ident(conn);
+ l2cap_pi(sk)->conf_state |= L2CAP_CONF_CONNECT_PEND;
l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
L2CAP_CONN_REQ, sizeof(req), &req);
@@ -464,12 +470,14 @@
}
if (sk->sk_state == BT_CONNECT) {
- if (l2cap_check_security(sk)) {
+ if (l2cap_check_security(sk) &&
+ __l2cap_no_conn_pending(sk)) {
struct l2cap_conn_req req;
req.scid = cpu_to_le16(l2cap_pi(sk)->scid);
req.psm = l2cap_pi(sk)->psm;
l2cap_pi(sk)->ident = l2cap_get_ident(conn);
+ l2cap_pi(sk)->conf_state |= L2CAP_CONF_CONNECT_PEND;
l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
L2CAP_CONN_REQ, sizeof(req), &req);
@@ -2912,7 +2920,6 @@
l2cap_pi(sk)->ident = 0;
l2cap_pi(sk)->dcid = dcid;
l2cap_pi(sk)->conf_state |= L2CAP_CONF_REQ_SENT;
-
l2cap_pi(sk)->conf_state &= ~L2CAP_CONF_CONNECT_PEND;
l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_CONF_REQ,
@@ -4404,6 +4411,7 @@
req.psm = l2cap_pi(sk)->psm;
l2cap_pi(sk)->ident = l2cap_get_ident(conn);
+ l2cap_pi(sk)->conf_state |= L2CAP_CONF_CONNECT_PEND;
l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
L2CAP_CONN_REQ, sizeof(req), &req);
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index eedf2c9..753fc42 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -217,14 +217,6 @@
return count != 0 && ret;
}
-static void br_poll_controller(struct net_device *br_dev)
-{
- struct netpoll *np = br_dev->npinfo->netpoll;
-
- if (np->real_dev != br_dev)
- netpoll_poll_dev(np->real_dev);
-}
-
void br_netpoll_cleanup(struct net_device *dev)
{
struct net_bridge *br = netdev_priv(dev);
@@ -295,7 +287,6 @@
.ndo_do_ioctl = br_dev_ioctl,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_netpoll_cleanup = br_netpoll_cleanup,
- .ndo_poll_controller = br_poll_controller,
#endif
};
diff --git a/net/bridge/br_fdb.c b/net/bridge/br_fdb.c
index 2663743..b01dde3 100644
--- a/net/bridge/br_fdb.c
+++ b/net/bridge/br_fdb.c
@@ -128,7 +128,7 @@
{
struct net_bridge *br = (struct net_bridge *)_data;
unsigned long delay = hold_time(br);
- unsigned long next_timer = jiffies + br->forward_delay;
+ unsigned long next_timer = jiffies + br->ageing_time;
int i;
spin_lock_bh(&br->hash_lock);
@@ -149,9 +149,7 @@
}
spin_unlock_bh(&br->hash_lock);
- /* Add HZ/4 to ensure we round the jiffies upwards to be after the next
- * timer, otherwise we might round down and will have no-op run. */
- mod_timer(&br->gc_timer, round_jiffies(next_timer + HZ/4));
+ mod_timer(&br->gc_timer, round_jiffies_up(next_timer));
}
/* Completely flush all dynamic entries in forwarding database.*/
diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c
index a98ef13..595da45 100644
--- a/net/bridge/br_forward.c
+++ b/net/bridge/br_forward.c
@@ -50,14 +50,7 @@
kfree_skb(skb);
else {
skb_push(skb, ETH_HLEN);
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
- if (unlikely(skb->dev->priv_flags & IFF_IN_NETPOLL)) {
- netpoll_send_skb(skb->dev->npinfo->netpoll, skb);
- skb->dev->priv_flags &= ~IFF_IN_NETPOLL;
- } else
-#endif
- dev_queue_xmit(skb);
+ dev_queue_xmit(skb);
}
}
@@ -73,23 +66,9 @@
static void __br_deliver(const struct net_bridge_port *to, struct sk_buff *skb)
{
-#ifdef CONFIG_NET_POLL_CONTROLLER
- struct net_bridge *br = to->br;
- if (unlikely(br->dev->priv_flags & IFF_IN_NETPOLL)) {
- struct netpoll *np;
- to->dev->npinfo = skb->dev->npinfo;
- np = skb->dev->npinfo->netpoll;
- np->real_dev = np->dev = to->dev;
- to->dev->priv_flags |= IFF_IN_NETPOLL;
- }
-#endif
skb->dev = to->dev;
NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
br_forward_finish);
-#ifdef CONFIG_NET_POLL_CONTROLLER
- if (skb->dev->npinfo)
- skb->dev->npinfo->netpoll->dev = br->dev;
-#endif
}
static void __br_forward(const struct net_bridge_port *to, struct sk_buff *skb)
@@ -140,10 +119,10 @@
void (*__packet_hook)(const struct net_bridge_port *p,
struct sk_buff *skb))
{
+ struct net_device *dev = BR_INPUT_SKB_CB(skb)->brdev;
+
skb = skb_clone(skb, GFP_ATOMIC);
if (!skb) {
- struct net_device *dev = BR_INPUT_SKB_CB(skb)->brdev;
-
dev->stats.tx_dropped++;
return -ENOMEM;
}
diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
index 9d21d98..27ae946 100644
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -99,6 +99,15 @@
return NULL;
}
+static struct net_bridge_mdb_entry *br_mdb_ip_get(
+ struct net_bridge_mdb_htable *mdb, struct br_ip *dst)
+{
+ if (!mdb)
+ return NULL;
+
+ return __br_mdb_ip_get(mdb, dst, br_ip_hash(mdb, dst));
+}
+
static struct net_bridge_mdb_entry *br_mdb_ip4_get(
struct net_bridge_mdb_htable *mdb, __be32 dst)
{
@@ -107,7 +116,7 @@
br_dst.u.ip4 = dst;
br_dst.proto = htons(ETH_P_IP);
- return __br_mdb_ip_get(mdb, &br_dst, __br_ip4_hash(mdb, dst));
+ return br_mdb_ip_get(mdb, &br_dst);
}
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
@@ -119,23 +128,17 @@
ipv6_addr_copy(&br_dst.u.ip6, dst);
br_dst.proto = htons(ETH_P_IPV6);
- return __br_mdb_ip_get(mdb, &br_dst, __br_ip6_hash(mdb, dst));
+ return br_mdb_ip_get(mdb, &br_dst);
}
#endif
-static struct net_bridge_mdb_entry *br_mdb_ip_get(
- struct net_bridge_mdb_htable *mdb, struct br_ip *dst)
-{
- return __br_mdb_ip_get(mdb, dst, br_ip_hash(mdb, dst));
-}
-
struct net_bridge_mdb_entry *br_mdb_get(struct net_bridge *br,
struct sk_buff *skb)
{
struct net_bridge_mdb_htable *mdb = br->mdb;
struct br_ip ip;
- if (!mdb || br->multicast_disabled)
+ if (br->multicast_disabled)
return NULL;
if (BR_INPUT_SKB_CB(skb)->igmp)
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index 4442099..8fb75f8 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -591,6 +591,9 @@
pskb_trim_rcsum(skb, len);
+ /* BUG: Should really parse the IP options here. */
+ memset(IPCB(skb), 0, sizeof(struct inet_skb_parm));
+
nf_bridge_put(skb->nf_bridge);
if (!nf_bridge_alloc(skb))
return NF_DROP;
diff --git a/net/caif/cfrfml.c b/net/caif/cfrfml.c
index cd2830f..fd27b17 100644
--- a/net/caif/cfrfml.c
+++ b/net/caif/cfrfml.c
@@ -83,7 +83,7 @@
if (!cfsrvl_ready(service, &ret))
return ret;
- if (!cfpkt_getlen(pkt) > CAIF_MAX_PAYLOAD_SIZE) {
+ if (cfpkt_getlen(pkt) > CAIF_MAX_PAYLOAD_SIZE) {
pr_err("CAIF: %s():Packet too large - size=%d\n",
__func__, cfpkt_getlen(pkt));
return -EOVERFLOW;
diff --git a/net/caif/cfserl.c b/net/caif/cfserl.c
index cb4325a..965c5ba 100644
--- a/net/caif/cfserl.c
+++ b/net/caif/cfserl.c
@@ -59,16 +59,18 @@
u8 stx = CFSERL_STX;
int ret;
u16 expectlen = 0;
+
caif_assert(newpkt != NULL);
spin_lock(&layr->sync);
if (layr->incomplete_frm != NULL) {
-
layr->incomplete_frm =
cfpkt_append(layr->incomplete_frm, newpkt, expectlen);
pkt = layr->incomplete_frm;
- if (pkt == NULL)
+ if (pkt == NULL) {
+ spin_unlock(&layr->sync);
return -ENOMEM;
+ }
} else {
pkt = newpkt;
}
diff --git a/net/caif/cfveil.c b/net/caif/cfveil.c
index 0fd827f..e04f7d9 100644
--- a/net/caif/cfveil.c
+++ b/net/caif/cfveil.c
@@ -84,7 +84,7 @@
return ret;
caif_assert(layr->dn != NULL);
caif_assert(layr->dn->transmit != NULL);
- if (!cfpkt_getlen(pkt) > CAIF_MAX_PAYLOAD_SIZE) {
+ if (cfpkt_getlen(pkt) > CAIF_MAX_PAYLOAD_SIZE) {
pr_warning("CAIF: %s(): Packet too large - size=%d\n",
__func__, cfpkt_getlen(pkt));
return -EOVERFLOW;
diff --git a/net/core/datagram.c b/net/core/datagram.c
index e009753..f5b6f43 100644
--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -229,15 +229,17 @@
void skb_free_datagram_locked(struct sock *sk, struct sk_buff *skb)
{
+ bool slow;
+
if (likely(atomic_read(&skb->users) == 1))
smp_rmb();
else if (likely(!atomic_dec_and_test(&skb->users)))
return;
- lock_sock_bh(sk);
+ slow = lock_sock_fast(sk);
skb_orphan(skb);
sk_mem_reclaim_partial(sk);
- unlock_sock_bh(sk);
+ unlock_sock_fast(sk, slow);
/* skb is now orphaned, can be freed outside of locked section */
__kfree_skb(skb);
diff --git a/net/core/dev.c b/net/core/dev.c
index 1845b08..0ea10f8 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1553,6 +1553,24 @@
rcu_read_unlock();
}
+/*
+ * Routine to help set real_num_tx_queues. To avoid skbs mapped to queues
+ * greater then real_num_tx_queues stale skbs on the qdisc must be flushed.
+ */
+void netif_set_real_num_tx_queues(struct net_device *dev, unsigned int txq)
+{
+ unsigned int real_num = dev->real_num_tx_queues;
+
+ if (unlikely(txq > dev->num_tx_queues))
+ ;
+ else if (txq > real_num)
+ dev->real_num_tx_queues = txq;
+ else if (txq < real_num) {
+ dev->real_num_tx_queues = txq;
+ qdisc_reset_all_tx_gt(dev, txq);
+ }
+}
+EXPORT_SYMBOL(netif_set_real_num_tx_queues);
static inline void __netif_reschedule(struct Qdisc *q)
{
@@ -1893,8 +1911,16 @@
*/
static inline void skb_orphan_try(struct sk_buff *skb)
{
- if (!skb_tx(skb)->flags)
+ struct sock *sk = skb->sk;
+
+ if (sk && !skb_tx(skb)->flags) {
+ /* skb_tx_hash() wont be able to get sk.
+ * We copy sk_hash into skb->rxhash
+ */
+ if (!skb->rxhash)
+ skb->rxhash = sk->sk_hash;
skb_orphan(skb);
+ }
}
int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev,
@@ -1980,8 +2006,7 @@
if (skb->sk && skb->sk->sk_hash)
hash = skb->sk->sk_hash;
else
- hash = (__force u16) skb->protocol;
-
+ hash = (__force u16) skb->protocol ^ skb->rxhash;
hash = jhash_1word(hash, hashrnd);
return (u16) (((u64) hash * dev->real_num_tx_queues) >> 32);
@@ -2004,12 +2029,11 @@
static struct netdev_queue *dev_pick_tx(struct net_device *dev,
struct sk_buff *skb)
{
- u16 queue_index;
+ int queue_index;
struct sock *sk = skb->sk;
- if (sk_tx_queue_recorded(sk)) {
- queue_index = sk_tx_queue_get(sk);
- } else {
+ queue_index = sk_tx_queue_get(sk);
+ if (queue_index < 0) {
const struct net_device_ops *ops = dev->netdev_ops;
if (ops->ndo_select_queue) {
@@ -2253,11 +2277,9 @@
if (skb_rx_queue_recorded(skb)) {
u16 index = skb_get_rx_queue(skb);
if (unlikely(index >= dev->num_rx_queues)) {
- if (net_ratelimit()) {
- pr_warning("%s received packet on queue "
- "%u, but number of RX queues is %u\n",
- dev->name, index, dev->num_rx_queues);
- }
+ WARN_ONCE(dev->num_rx_queues > 1, "%s received packet "
+ "on queue %u, but number of RX queues is %u\n",
+ dev->name, index, dev->num_rx_queues);
goto done;
}
rxqueue = dev->_rx + index;
@@ -2795,7 +2817,7 @@
struct net_device *orig_dev;
struct net_device *master;
struct net_device *null_or_orig;
- struct net_device *null_or_bond;
+ struct net_device *orig_or_bond;
int ret = NET_RX_DROP;
__be16 type;
@@ -2812,13 +2834,24 @@
if (!skb->skb_iif)
skb->skb_iif = skb->dev->ifindex;
+ /*
+ * bonding note: skbs received on inactive slaves should only
+ * be delivered to pkt handlers that are exact matches. Also
+ * the deliver_no_wcard flag will be set. If packet handlers
+ * are sensitive to duplicate packets these skbs will need to
+ * be dropped at the handler. The vlan accel path may have
+ * already set the deliver_no_wcard flag.
+ */
null_or_orig = NULL;
orig_dev = skb->dev;
master = ACCESS_ONCE(orig_dev->master);
- if (master) {
- if (skb_bond_should_drop(skb, master))
+ if (skb->deliver_no_wcard)
+ null_or_orig = orig_dev;
+ else if (master) {
+ if (skb_bond_should_drop(skb, master)) {
+ skb->deliver_no_wcard = 1;
null_or_orig = orig_dev; /* deliver only exact match */
- else
+ } else
skb->dev = master;
}
@@ -2868,10 +2901,10 @@
* device that may have registered for a specific ptype. The
* handler may have to adjust skb->dev and orig_dev.
*/
- null_or_bond = NULL;
+ orig_or_bond = orig_dev;
if ((skb->dev->priv_flags & IFF_802_1Q_VLAN) &&
(vlan_dev_real_dev(skb->dev)->priv_flags & IFF_BONDING)) {
- null_or_bond = vlan_dev_real_dev(skb->dev);
+ orig_or_bond = vlan_dev_real_dev(skb->dev);
}
type = skb->protocol;
@@ -2879,7 +2912,7 @@
&ptype_base[ntohs(type) & PTYPE_HASH_MASK], list) {
if (ptype->type == type && (ptype->dev == null_or_orig ||
ptype->dev == skb->dev || ptype->dev == orig_dev ||
- ptype->dev == null_or_bond)) {
+ ptype->dev == orig_or_bond)) {
if (pt_prev)
ret = deliver_skb(skb, pt_prev, orig_dev);
pt_prev = ptype;
diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index cf208d8..ad41529 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -172,12 +172,12 @@
return;
}
-static void trace_kfree_skb_hit(struct sk_buff *skb, void *location)
+static void trace_kfree_skb_hit(void *ignore, struct sk_buff *skb, void *location)
{
trace_drop_common(skb, location);
}
-static void trace_napi_poll_hit(struct napi_struct *napi)
+static void trace_napi_poll_hit(void *ignore, struct napi_struct *napi)
{
struct dm_hw_stat_delta *new_stat;
@@ -225,12 +225,12 @@
switch (state) {
case TRACE_ON:
- rc |= register_trace_kfree_skb(trace_kfree_skb_hit);
- rc |= register_trace_napi_poll(trace_napi_poll_hit);
+ rc |= register_trace_kfree_skb(trace_kfree_skb_hit, NULL);
+ rc |= register_trace_napi_poll(trace_napi_poll_hit, NULL);
break;
case TRACE_OFF:
- rc |= unregister_trace_kfree_skb(trace_kfree_skb_hit);
- rc |= unregister_trace_napi_poll(trace_napi_poll_hit);
+ rc |= unregister_trace_kfree_skb(trace_kfree_skb_hit, NULL);
+ rc |= unregister_trace_napi_poll(trace_napi_poll_hit, NULL);
tracepoint_synchronize_unregister();
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index a0f4964..75e4ffe 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -318,23 +318,33 @@
}
static noinline_for_stack int ethtool_set_rxnfc(struct net_device *dev,
- void __user *useraddr)
+ u32 cmd, void __user *useraddr)
{
- struct ethtool_rxnfc cmd;
+ struct ethtool_rxnfc info;
+ size_t info_size = sizeof(info);
if (!dev->ethtool_ops->set_rxnfc)
return -EOPNOTSUPP;
- if (copy_from_user(&cmd, useraddr, sizeof(cmd)))
+ /* struct ethtool_rxnfc was originally defined for
+ * ETHTOOL_{G,S}RXFH with only the cmd, flow_type and data
+ * members. User-space might still be using that
+ * definition. */
+ if (cmd == ETHTOOL_SRXFH)
+ info_size = (offsetof(struct ethtool_rxnfc, data) +
+ sizeof(info.data));
+
+ if (copy_from_user(&info, useraddr, info_size))
return -EFAULT;
- return dev->ethtool_ops->set_rxnfc(dev, &cmd);
+ return dev->ethtool_ops->set_rxnfc(dev, &info);
}
static noinline_for_stack int ethtool_get_rxnfc(struct net_device *dev,
- void __user *useraddr)
+ u32 cmd, void __user *useraddr)
{
struct ethtool_rxnfc info;
+ size_t info_size = sizeof(info);
const struct ethtool_ops *ops = dev->ethtool_ops;
int ret;
void *rule_buf = NULL;
@@ -342,13 +352,22 @@
if (!ops->get_rxnfc)
return -EOPNOTSUPP;
- if (copy_from_user(&info, useraddr, sizeof(info)))
+ /* struct ethtool_rxnfc was originally defined for
+ * ETHTOOL_{G,S}RXFH with only the cmd, flow_type and data
+ * members. User-space might still be using that
+ * definition. */
+ if (cmd == ETHTOOL_GRXFH)
+ info_size = (offsetof(struct ethtool_rxnfc, data) +
+ sizeof(info.data));
+
+ if (copy_from_user(&info, useraddr, info_size))
return -EFAULT;
if (info.cmd == ETHTOOL_GRXCLSRLALL) {
if (info.rule_cnt > 0) {
- rule_buf = kmalloc(info.rule_cnt * sizeof(u32),
- GFP_USER);
+ if (info.rule_cnt <= KMALLOC_MAX_SIZE / sizeof(u32))
+ rule_buf = kmalloc(info.rule_cnt * sizeof(u32),
+ GFP_USER);
if (!rule_buf)
return -ENOMEM;
}
@@ -359,7 +378,7 @@
goto err_out;
ret = -EFAULT;
- if (copy_to_user(useraddr, &info, sizeof(info)))
+ if (copy_to_user(useraddr, &info, info_size))
goto err_out;
if (rule_buf) {
@@ -1516,12 +1535,12 @@
case ETHTOOL_GRXCLSRLCNT:
case ETHTOOL_GRXCLSRULE:
case ETHTOOL_GRXCLSRLALL:
- rc = ethtool_get_rxnfc(dev, useraddr);
+ rc = ethtool_get_rxnfc(dev, ethcmd, useraddr);
break;
case ETHTOOL_SRXFH:
case ETHTOOL_SRXCLSRLDEL:
case ETHTOOL_SRXCLSRLINS:
- rc = ethtool_set_rxnfc(dev, useraddr);
+ rc = ethtool_set_rxnfc(dev, ethcmd, useraddr);
break;
case ETHTOOL_GGRO:
rc = ethtool_get_gro(dev, useraddr);
diff --git a/net/core/gen_estimator.c b/net/core/gen_estimator.c
index cf8e703..785e527 100644
--- a/net/core/gen_estimator.c
+++ b/net/core/gen_estimator.c
@@ -107,6 +107,7 @@
/* Protects against soft lockup during large deletion */
static struct rb_root est_root = RB_ROOT;
+static DEFINE_SPINLOCK(est_tree_lock);
static void est_timer(unsigned long arg)
{
@@ -201,7 +202,6 @@
*
* Returns 0 on success or a negative error code.
*
- * NOTE: Called under rtnl_mutex
*/
int gen_new_estimator(struct gnet_stats_basic_packed *bstats,
struct gnet_stats_rate_est *rate_est,
@@ -232,6 +232,7 @@
est->last_packets = bstats->packets;
est->avpps = rate_est->pps<<10;
+ spin_lock(&est_tree_lock);
if (!elist[idx].timer.function) {
INIT_LIST_HEAD(&elist[idx].list);
setup_timer(&elist[idx].timer, est_timer, idx);
@@ -242,6 +243,7 @@
list_add_rcu(&est->list, &elist[idx].list);
gen_add_node(est);
+ spin_unlock(&est_tree_lock);
return 0;
}
@@ -261,13 +263,13 @@
*
* Removes the rate estimator specified by &bstats and &rate_est.
*
- * NOTE: Called under rtnl_mutex
*/
void gen_kill_estimator(struct gnet_stats_basic_packed *bstats,
struct gnet_stats_rate_est *rate_est)
{
struct gen_estimator *e;
+ spin_lock(&est_tree_lock);
while ((e = gen_find_node(bstats, rate_est))) {
rb_erase(&e->node, &est_root);
@@ -278,6 +280,7 @@
list_del_rcu(&e->list);
call_rcu(&e->e_rcu, __gen_kill_estimator);
}
+ spin_unlock(&est_tree_lock);
}
EXPORT_SYMBOL(gen_kill_estimator);
@@ -312,8 +315,14 @@
bool gen_estimator_active(const struct gnet_stats_basic_packed *bstats,
const struct gnet_stats_rate_est *rate_est)
{
+ bool res;
+
ASSERT_RTNL();
- return gen_find_node(bstats, rate_est) != NULL;
+ spin_lock(&est_tree_lock);
+ res = gen_find_node(bstats, rate_est) != NULL;
+ spin_unlock(&est_tree_lock);
+
+ return res;
}
EXPORT_SYMBOL(gen_estimator_active);
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index bff3790..a4e0a74 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -934,6 +934,7 @@
kfree_skb(buff);
NEIGH_CACHE_STAT_INC(neigh->tbl, unres_discards);
}
+ skb_dst_force(skb);
__skb_queue_tail(&neigh->arp_queue, skb);
}
rc = 1;
@@ -948,7 +949,10 @@
{
struct hh_cache *hh;
void (*update)(struct hh_cache*, const struct net_device*, const unsigned char *)
- = neigh->dev->header_ops->cache_update;
+ = NULL;
+
+ if (neigh->dev->header_ops)
+ update = neigh->dev->header_ops->cache_update;
if (update) {
for (hh = neigh->hh; hh; hh = hh->hh_next) {
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 2ad68da..1dacd7b 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -2170,7 +2170,7 @@
end_time = ktime_now();
pkt_dev->idle_acc += ktime_to_ns(ktime_sub(end_time, start_time));
- pkt_dev->next_tx = ktime_add_ns(end_time, pkt_dev->delay);
+ pkt_dev->next_tx = ktime_add_ns(spin_until, pkt_dev->delay);
}
static inline void set_pkt_overhead(struct pktgen_dev *pkt_dev)
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 7ab86f3..1a2af24 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -650,11 +650,12 @@
if (dev->dev.parent && dev_is_pci(dev->dev.parent)) {
int num_vfs = dev_num_vf(dev->dev.parent);
- size_t size = nlmsg_total_size(sizeof(struct nlattr));
- size += nlmsg_total_size(num_vfs * sizeof(struct nlattr));
- size += num_vfs * (sizeof(struct ifla_vf_mac) +
- sizeof(struct ifla_vf_vlan) +
- sizeof(struct ifla_vf_tx_rate));
+ size_t size = nla_total_size(sizeof(struct nlattr));
+ size += nla_total_size(num_vfs * sizeof(struct nlattr));
+ size += num_vfs *
+ (nla_total_size(sizeof(struct ifla_vf_mac)) +
+ nla_total_size(sizeof(struct ifla_vf_vlan)) +
+ nla_total_size(sizeof(struct ifla_vf_tx_rate)));
return size;
} else
return 0;
@@ -722,14 +723,13 @@
for (vf = 0; vf < dev_num_vf(dev->dev.parent); vf++) {
vf_port = nla_nest_start(skb, IFLA_VF_PORT);
- if (!vf_port) {
- nla_nest_cancel(skb, vf_ports);
- return -EMSGSIZE;
- }
+ if (!vf_port)
+ goto nla_put_failure;
NLA_PUT_U32(skb, IFLA_PORT_VF, vf);
err = dev->netdev_ops->ndo_get_vf_port(dev, vf, skb);
+ if (err == -EMSGSIZE)
+ goto nla_put_failure;
if (err) {
-nla_put_failure:
nla_nest_cancel(skb, vf_port);
continue;
}
@@ -739,6 +739,10 @@
nla_nest_end(skb, vf_ports);
return 0;
+
+nla_put_failure:
+ nla_nest_cancel(skb, vf_ports);
+ return -EMSGSIZE;
}
static int rtnl_port_self_fill(struct sk_buff *skb, struct net_device *dev)
@@ -753,7 +757,7 @@
err = dev->netdev_ops->ndo_get_vf_port(dev, PORT_SELF_VF, skb);
if (err) {
nla_nest_cancel(skb, port_self);
- return err;
+ return (err == -EMSGSIZE) ? err : 0;
}
nla_nest_end(skb, port_self);
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index f8abf68..34432b4 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -482,22 +482,22 @@
* reference count dropping and cleans up the skbuff as if it
* just came from __alloc_skb().
*/
-int skb_recycle_check(struct sk_buff *skb, int skb_size)
+bool skb_recycle_check(struct sk_buff *skb, int skb_size)
{
struct skb_shared_info *shinfo;
if (irqs_disabled())
- return 0;
+ return false;
if (skb_is_nonlinear(skb) || skb->fclone != SKB_FCLONE_UNAVAILABLE)
- return 0;
+ return false;
skb_size = SKB_DATA_ALIGN(skb_size + NET_SKB_PAD);
if (skb_end_pointer(skb) - skb->head < skb_size)
- return 0;
+ return false;
if (skb_shared(skb) || skb_cloned(skb))
- return 0;
+ return false;
skb_release_head_state(skb);
@@ -509,7 +509,7 @@
skb->data = skb->head + NET_SKB_PAD;
skb_reset_tail_pointer(skb);
- return 1;
+ return true;
}
EXPORT_SYMBOL(skb_recycle_check);
@@ -532,6 +532,7 @@
new->ip_summed = old->ip_summed;
skb_copy_queue_mapping(new, old);
new->priority = old->priority;
+ new->deliver_no_wcard = old->deliver_no_wcard;
#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
new->ipvs_property = old->ipvs_property;
#endif
@@ -569,7 +570,6 @@
C(len);
C(data_len);
C(mac_len);
- C(rxhash);
n->hdr_len = skb->nohdr ? skb_headroom(skb) : skb->hdr_len;
n->cloned = 1;
n->nohdr = 0;
@@ -2965,6 +2965,34 @@
}
EXPORT_SYMBOL_GPL(skb_cow_data);
+static void sock_rmem_free(struct sk_buff *skb)
+{
+ struct sock *sk = skb->sk;
+
+ atomic_sub(skb->truesize, &sk->sk_rmem_alloc);
+}
+
+/*
+ * Note: We dont mem charge error packets (no sk_forward_alloc changes)
+ */
+int sock_queue_err_skb(struct sock *sk, struct sk_buff *skb)
+{
+ if (atomic_read(&sk->sk_rmem_alloc) + skb->truesize >=
+ (unsigned)sk->sk_rcvbuf)
+ return -ENOMEM;
+
+ skb_orphan(skb);
+ skb->sk = sk;
+ skb->destructor = sock_rmem_free;
+ atomic_add(skb->truesize, &sk->sk_rmem_alloc);
+
+ skb_queue_tail(&sk->sk_error_queue, skb);
+ if (!sock_flag(sk, SOCK_DEAD))
+ sk->sk_data_ready(sk, skb->len);
+ return 0;
+}
+EXPORT_SYMBOL(sock_queue_err_skb);
+
void skb_tstamp_tx(struct sk_buff *orig_skb,
struct skb_shared_hwtstamps *hwtstamps)
{
@@ -2996,7 +3024,9 @@
memset(serr, 0, sizeof(*serr));
serr->ee.ee_errno = ENOMSG;
serr->ee.ee_origin = SO_EE_ORIGIN_TIMESTAMPING;
+
err = sock_queue_err_skb(sk, skb);
+
if (err)
kfree_skb(skb);
}
diff --git a/net/core/sock.c b/net/core/sock.c
index 37fe9b6..2cf7f9f 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -2007,6 +2007,39 @@
}
EXPORT_SYMBOL(release_sock);
+/**
+ * lock_sock_fast - fast version of lock_sock
+ * @sk: socket
+ *
+ * This version should be used for very small section, where process wont block
+ * return false if fast path is taken
+ * sk_lock.slock locked, owned = 0, BH disabled
+ * return true if slow path is taken
+ * sk_lock.slock unlocked, owned = 1, BH enabled
+ */
+bool lock_sock_fast(struct sock *sk)
+{
+ might_sleep();
+ spin_lock_bh(&sk->sk_lock.slock);
+
+ if (!sk->sk_lock.owned)
+ /*
+ * Note : We must disable BH
+ */
+ return false;
+
+ __lock_sock(sk);
+ sk->sk_lock.owned = 1;
+ spin_unlock(&sk->sk_lock.slock);
+ /*
+ * The sk_lock has mutex_lock() semantics here:
+ */
+ mutex_acquire(&sk->sk_lock.dep_map, 0, 0, _RET_IP_);
+ local_bh_enable();
+ return true;
+}
+EXPORT_SYMBOL(lock_sock_fast);
+
int sock_get_timestamp(struct sock *sk, struct timeval __user *userstamp)
{
struct timeval tv;
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index c51b554..1120178 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -1,7 +1,7 @@
menuconfig NET_DSA
bool "Distributed Switch Architecture support"
default n
- depends on EXPERIMENTAL && !S390
+ depends on EXPERIMENTAL && NET_ETHERNET && !S390
select PHYLIB
---help---
This allows you to use hardware switch chips that use
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 8e3a1fd..7c3a7d1 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -303,7 +303,7 @@
If unsure, say N.
config SYN_COOKIES
- bool "IP: TCP syncookie support (disabled per default)"
+ bool "IP: TCP syncookie support"
---help---
Normal TCP/IP networking is open to an attack known as "SYN
flooding". This denial-of-service attack prevents legitimate remote
@@ -328,13 +328,13 @@
server is really overloaded. If this happens frequently better turn
them off.
- If you say Y here, note that SYN cookies aren't enabled by default;
- you can enable them by saying Y to "/proc file system support" and
+ If you say Y here, you can disable SYN cookies at run time by
+ saying Y to "/proc file system support" and
"Sysctl support" below and executing the command
- echo 1 >/proc/sys/net/ipv4/tcp_syncookies
+ echo 0 > /proc/sys/net/ipv4/tcp_syncookies
- at boot time after the /proc file system has been mounted.
+ after the /proc file system has been mounted.
If unsure, say N.
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 9a4a6c9..041d41d 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -873,8 +873,10 @@
!exthdrlen)
csummode = CHECKSUM_PARTIAL;
+ skb = skb_peek_tail(&sk->sk_write_queue);
+
inet->cork.length += length;
- if (((length> mtu) || !skb_queue_empty(&sk->sk_write_queue)) &&
+ if (((length > mtu) || (skb && skb_is_gso(skb))) &&
(sk->sk_protocol == IPPROTO_UDP) &&
(rt->u.dst.dev->features & NETIF_F_UFO)) {
err = ip_ufo_append_data(sk, getfrag, from, length, hh_len,
@@ -892,7 +894,7 @@
* adding appropriate IP header.
*/
- if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL)
+ if (!skb)
goto alloc_new_skb;
while (length > 0) {
@@ -1121,7 +1123,8 @@
return -EINVAL;
inet->cork.length += size;
- if ((sk->sk_protocol == IPPROTO_UDP) &&
+ if ((size + skb->len > mtu) &&
+ (sk->sk_protocol == IPPROTO_UDP) &&
(rt->u.dst.dev->features & NETIF_F_UFO)) {
skb_shinfo(skb)->gso_size = mtu - fragheaderlen;
skb_shinfo(skb)->gso_type = SKB_GSO_UDP;
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 4588910..7f62735 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -267,8 +267,10 @@
{
struct mr_table *mrt, *next;
- list_for_each_entry_safe(mrt, next, &net->ipv4.mr_tables, list)
+ list_for_each_entry_safe(mrt, next, &net->ipv4.mr_tables, list) {
+ list_del(&mrt->list);
kfree(mrt);
+ }
fib_rules_unregister(net->ipv4.mr_rules_ops);
}
#else
@@ -440,8 +442,10 @@
int err;
err = ipmr_fib_lookup(net, &fl, &mrt);
- if (err < 0)
+ if (err < 0) {
+ kfree_skb(skb);
return err;
+ }
read_lock(&mrt_lock);
dev->stats.tx_bytes += skb->len;
@@ -1726,8 +1730,10 @@
goto dont_forward;
err = ipmr_fib_lookup(net, &skb_rtable(skb)->fl, &mrt);
- if (err < 0)
+ if (err < 0) {
+ kfree_skb(skb);
return err;
+ }
if (!local) {
if (IPCB(skb)->opt.router_alert) {
@@ -1911,7 +1917,7 @@
struct rtattr *mp_head;
/* If cache is unresolved, don't try to parse IIF and OIF */
- if (c->mfc_parent > MAXVIFS)
+ if (c->mfc_parent >= MAXVIFS)
return -ENOENT;
if (VIF_EXISTS(mrt, c->mfc_parent))
diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c
index 63958f3..4b6c5ca 100644
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -336,7 +336,7 @@
cpu = smp_processor_id();
table_base = private->entries[cpu];
jumpstack = (struct ipt_entry **)private->jumpstack[cpu];
- stackptr = &private->stackptr[cpu];
+ stackptr = per_cpu_ptr(private->stackptr, cpu);
origptr = *stackptr;
e = get_entry(table_base, private->hook_entry[hook]);
diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index 5c24db4..9f6b222 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -347,7 +347,7 @@
{ .sport = th->dest,
.dport = th->source } } };
security_req_classify_flow(req, &fl);
- if (ip_route_output_key(&init_net, &rt, &fl)) {
+ if (ip_route_output_key(sock_net(sk), &rt, &fl)) {
reqsk_free(req);
goto out;
}
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 6596b4f..65afeae 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -608,6 +608,7 @@
ssize_t spliced;
int ret;
+ sock_rps_record_flow(sk);
/*
* We can't seek on a socket input
*/
diff --git a/net/ipv4/tcp_hybla.c b/net/ipv4/tcp_hybla.c
index c209e05..377bc93 100644
--- a/net/ipv4/tcp_hybla.c
+++ b/net/ipv4/tcp_hybla.c
@@ -126,8 +126,8 @@
* calculate 2^fract in a <<7 value.
*/
is_slowstart = 1;
- increment = ((1 << ca->rho) * hybla_fraction(rho_fractions))
- - 128;
+ increment = ((1 << min(ca->rho, 16U)) *
+ hybla_fraction(rho_fractions)) - 128;
} else {
/*
* congestion avoidance
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 3e6dafc..548d575 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -2639,7 +2639,7 @@
if (sk->sk_family == AF_INET) {
printk(KERN_DEBUG "Undo %s %pI4/%u c%u l%u ss%u/%u p%u\n",
msg,
- &inet->daddr, ntohs(inet->dport),
+ &inet->inet_daddr, ntohs(inet->inet_dport),
tp->snd_cwnd, tcp_left_out(tp),
tp->snd_ssthresh, tp->prior_ssthresh,
tp->packets_out);
@@ -2649,7 +2649,7 @@
struct ipv6_pinfo *np = inet6_sk(sk);
printk(KERN_DEBUG "Undo %s %pI6/%u c%u l%u ss%u/%u p%u\n",
msg,
- &np->daddr, ntohs(inet->dport),
+ &np->daddr, ntohs(inet->inet_dport),
tp->snd_cwnd, tcp_left_out(tp),
tp->snd_ssthresh, tp->prior_ssthresh,
tp->packets_out);
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 202cf09..fe193e5 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1555,6 +1555,7 @@
#endif
if (sk->sk_state == TCP_ESTABLISHED) { /* Fast path */
+ sock_rps_save_rxhash(sk, skb->rxhash);
TCP_CHECK_TIMER(sk);
if (tcp_rcv_established(sk, skb, tcp_hdr(skb), skb->len)) {
rsk = sk;
@@ -1579,7 +1580,9 @@
}
return 0;
}
- }
+ } else
+ sock_rps_save_rxhash(sk, skb->rxhash);
+
TCP_CHECK_TIMER(sk);
if (tcp_rcv_state_process(sk, skb, tcp_hdr(skb), skb->len)) {
@@ -1672,8 +1675,6 @@
skb->dev = NULL;
- sock_rps_save_rxhash(sk, skb->rxhash);
-
bh_lock_sock_nested(sk);
ret = 0;
if (!sock_owned_by_user(sk)) {
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index b4ed957..7ed9dc1 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2208,6 +2208,9 @@
int mib_idx;
int fwd_rexmitting = 0;
+ if (!tp->packets_out)
+ return;
+
if (!tp->lost_out)
tp->retransmit_high = tp->snd_una;
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index baeec29..eec4ff4 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -633,9 +633,9 @@
if (!inet->recverr) {
if (!harderr || sk->sk_state != TCP_ESTABLISHED)
goto out;
- } else {
+ } else
ip_icmp_error(sk, skb, err, uh->dest, info, (u8 *)(uh+1));
- }
+
sk->sk_err = err;
sk->sk_error_report(sk);
out:
@@ -1063,10 +1063,11 @@
spin_unlock_bh(&rcvq->lock);
if (!skb_queue_empty(&list_kill)) {
- lock_sock_bh(sk);
+ bool slow = lock_sock_fast(sk);
+
__skb_queue_purge(&list_kill);
sk_mem_reclaim_partial(sk);
- unlock_sock_bh(sk);
+ unlock_sock_fast(sk, slow);
}
return res;
}
@@ -1123,6 +1124,7 @@
int peeked;
int err;
int is_udplite = IS_UDPLITE(sk);
+ bool slow;
/*
* Check any passed addresses
@@ -1197,10 +1199,10 @@
return err;
csum_copy_err:
- lock_sock_bh(sk);
+ slow = lock_sock_fast(sk);
if (!skb_kill_datagram(sk, skb, flags))
UDP_INC_STATS_USER(sock_net(sk), UDP_MIB_INERRORS, is_udplite);
- unlock_sock_bh(sk);
+ unlock_sock_fast(sk, slow);
if (noblock)
return -EAGAIN;
@@ -1625,9 +1627,9 @@
void udp_destroy_sock(struct sock *sk)
{
- lock_sock_bh(sk);
+ bool slow = lock_sock_fast(sk);
udp_flush_pending_frames(sk);
- unlock_sock_bh(sk);
+ unlock_sock_fast(sk, slow);
}
/*
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index 1705476..23883a4 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -108,6 +108,8 @@
u8 *xprth = skb_network_header(skb) + iph->ihl * 4;
memset(fl, 0, sizeof(struct flowi));
+ fl->mark = skb->mark;
+
if (!(iph->frag_off & htons(IP_MF | IP_OFFSET))) {
switch (iph->protocol) {
case IPPROTO_UDP:
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index ce79929..03e62f9 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -483,7 +483,7 @@
np->tclass, NULL, &fl, (struct rt6_info*)dst,
MSG_DONTWAIT, np->dontfrag);
if (err) {
- ICMP6_INC_STATS_BH(net, idev, ICMP6_MIB_OUTMSGS);
+ ICMP6_INC_STATS_BH(net, idev, ICMP6_MIB_OUTERRORS);
ip6_flush_pending_frames(sk);
goto out_put;
}
@@ -565,7 +565,7 @@
np->dontfrag);
if (err) {
- ICMP6_INC_STATS_BH(net, idev, ICMP6_MIB_OUTMSGS);
+ ICMP6_INC_STATS_BH(net, idev, ICMP6_MIB_OUTERRORS);
ip6_flush_pending_frames(sk);
goto out_put;
}
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index cd963f6..89425af 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -507,7 +507,7 @@
if (mtu < IPV6_MIN_MTU)
mtu = IPV6_MIN_MTU;
- if (skb->len > mtu) {
+ if (skb->len > mtu && !skb_is_gso(skb)) {
/* Again, force OUTPUT device used as source address */
skb->dev = dst->dev;
icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu);
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index bd9e7d3..66078da 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -120,7 +120,7 @@
static void ipmr_expire_process(unsigned long arg);
#ifdef CONFIG_IPV6_MROUTE_MULTIPLE_TABLES
-#define ip6mr_for_each_table(mrt, met) \
+#define ip6mr_for_each_table(mrt, net) \
list_for_each_entry_rcu(mrt, &net->ipv6.mr6_tables, list)
static struct mr6_table *ip6mr_get_table(struct net *net, u32 id)
@@ -254,8 +254,10 @@
{
struct mr6_table *mrt, *next;
- list_for_each_entry_safe(mrt, next, &net->ipv6.mr6_tables, list)
+ list_for_each_entry_safe(mrt, next, &net->ipv6.mr6_tables, list) {
+ list_del(&mrt->list);
ip6mr_free_table(mrt);
+ }
fib_rules_unregister(net->ipv6.mr6_rules_ops);
}
#else
@@ -2017,7 +2019,7 @@
struct rtattr *mp_head;
/* If cache is unresolved, don't try to parse IIF and OIF */
- if (c->mf6c_parent > MAXMIFS)
+ if (c->mf6c_parent >= MAXMIFS)
return -ENOENT;
if (MIF_EXISTS(mrt, c->mf6c_parent))
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index 59f1881..ab1622d 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -1356,7 +1356,10 @@
IPV6_TLV_PADN, 0 };
/* we assume size > sizeof(ra) here */
- skb = sock_alloc_send_skb(sk, size + LL_ALLOCATED_SPACE(dev), 1, &err);
+ size += LL_ALLOCATED_SPACE(dev);
+ /* limit our allocations to order-0 page */
+ size = min_t(int, size, SKB_MAX_ORDER(0, 0));
+ skb = sock_alloc_send_skb(sk, size, 1, &err);
if (!skb)
return NULL;
diff --git a/net/ipv6/mip6.c b/net/ipv6/mip6.c
index 2794b60..d6e9599 100644
--- a/net/ipv6/mip6.c
+++ b/net/ipv6/mip6.c
@@ -347,11 +347,12 @@
static int mip6_rthdr_input(struct xfrm_state *x, struct sk_buff *skb)
{
+ struct ipv6hdr *iph = ipv6_hdr(skb);
struct rt2_hdr *rt2 = (struct rt2_hdr *)skb->data;
int err = rt2->rt_hdr.nexthdr;
spin_lock(&x->lock);
- if (!ipv6_addr_equal(&rt2->addr, (struct in6_addr *)x->coaddr) &&
+ if (!ipv6_addr_equal(&iph->daddr, (struct in6_addr *)x->coaddr) &&
!ipv6_addr_any((struct in6_addr *)x->coaddr))
err = -ENOENT;
spin_unlock(&x->lock);
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 0abdc24..2efef52 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -586,6 +586,7 @@
src_addr = solicited_addr;
if (ifp->flags & IFA_F_OPTIMISTIC)
override = 0;
+ inc_opt |= ifp->idev->cnf.force_tllao;
in6_ifa_put(ifp);
} else {
if (ipv6_dev_get_saddr(dev_net(dev), dev, daddr,
@@ -599,7 +600,6 @@
icmp6h.icmp6_solicited = solicited;
icmp6h.icmp6_override = override;
- inc_opt |= ifp->idev->cnf.force_tllao;
__ndisc_send(dev, neigh, daddr, src_addr,
&icmp6h, solicited_addr,
inc_opt ? ND_OPT_TARGET_LL_ADDR : 0);
diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c
index 6f517bd..9d2d68f 100644
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c
@@ -363,7 +363,7 @@
cpu = smp_processor_id();
table_base = private->entries[cpu];
jumpstack = (struct ip6t_entry **)private->jumpstack[cpu];
- stackptr = &private->stackptr[cpu];
+ stackptr = per_cpu_ptr(private->stackptr, cpu);
origptr = *stackptr;
e = get_entry(table_base, private->hook_entry[hook]);
diff --git a/net/ipv6/netfilter/ip6t_REJECT.c b/net/ipv6/netfilter/ip6t_REJECT.c
index 47d2277..2933396 100644
--- a/net/ipv6/netfilter/ip6t_REJECT.c
+++ b/net/ipv6/netfilter/ip6t_REJECT.c
@@ -97,9 +97,11 @@
fl.fl_ip_dport = otcph.source;
security_skb_classify_flow(oldskb, &fl);
dst = ip6_route_output(net, NULL, &fl);
- if (dst == NULL)
+ if (dst == NULL || dst->error) {
+ dst_release(dst);
return;
- if (dst->error || xfrm_lookup(net, &dst, &fl, NULL, 0))
+ }
+ if (xfrm_lookup(net, &dst, &fl, NULL, 0))
return;
hh_len = (dst->dev->hard_header_len + 15)&~15;
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 294cbe8..252d761 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -814,7 +814,7 @@
{
int flags = 0;
- if (fl->oif || rt6_need_strict(&fl->fl6_dst))
+ if ((sk && sk->sk_bound_dev_if) || rt6_need_strict(&fl->fl6_dst))
flags |= RT6_LOOKUP_F_IFACE;
if (!ipv6_addr_any(&fl->fl6_src))
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 3d7a2c0..87be586 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -328,6 +328,7 @@
int err;
int is_udplite = IS_UDPLITE(sk);
int is_udp4;
+ bool slow;
if (addr_len)
*addr_len=sizeof(struct sockaddr_in6);
@@ -424,7 +425,7 @@
return err;
csum_copy_err:
- lock_sock_bh(sk);
+ slow = lock_sock_fast(sk);
if (!skb_kill_datagram(sk, skb, flags)) {
if (is_udp4)
UDP_INC_STATS_USER(sock_net(sk),
@@ -433,7 +434,7 @@
UDP6_INC_STATS_USER(sock_net(sk),
UDP_MIB_INERRORS, is_udplite);
}
- unlock_sock_bh(sk);
+ unlock_sock_fast(sk, slow);
if (flags & MSG_DONTWAIT)
return -EAGAIN;
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index 4a0e77e..6baeabb 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -124,6 +124,8 @@
u8 nexthdr = nh[IP6CB(skb)->nhoff];
memset(fl, 0, sizeof(struct flowi));
+ fl->mark = skb->mark;
+
ipv6_addr_copy(&fl->fl6_dst, reverse ? &hdr->saddr : &hdr->daddr);
ipv6_addr_copy(&fl->fl6_src, reverse ? &hdr->daddr : &hdr->saddr);
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index c8b4599..9637e45 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -1619,7 +1619,7 @@
save_message:
save_msg = kzalloc(sizeof(struct sock_msg_q), GFP_ATOMIC | GFP_DMA);
if (!save_msg)
- return;
+ goto out_unlock;
save_msg->path = path;
save_msg->msg = *msg;
diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c
index fd8b283..f28ad2cc 100644
--- a/net/iucv/iucv.c
+++ b/net/iucv/iucv.c
@@ -632,13 +632,14 @@
iucv_irq_data[cpu] = kmalloc_node(sizeof(struct iucv_irq_data),
GFP_KERNEL|GFP_DMA, cpu_to_node(cpu));
if (!iucv_irq_data[cpu])
- return NOTIFY_BAD;
+ return notifier_from_errno(-ENOMEM);
+
iucv_param[cpu] = kmalloc_node(sizeof(union iucv_param),
GFP_KERNEL|GFP_DMA, cpu_to_node(cpu));
if (!iucv_param[cpu]) {
kfree(iucv_irq_data[cpu]);
iucv_irq_data[cpu] = NULL;
- return NOTIFY_BAD;
+ return notifier_from_errno(-ENOMEM);
}
iucv_param_irq[cpu] = kmalloc_node(sizeof(union iucv_param),
GFP_KERNEL|GFP_DMA, cpu_to_node(cpu));
@@ -647,7 +648,7 @@
iucv_param[cpu] = NULL;
kfree(iucv_irq_data[cpu]);
iucv_irq_data[cpu] = NULL;
- return NOTIFY_BAD;
+ return notifier_from_errno(-ENOMEM);
}
break;
case CPU_UP_CANCELED:
@@ -677,7 +678,7 @@
cpu_clear(cpu, cpumask);
if (cpus_empty(cpumask))
/* Can't offline last IUCV enabled cpu. */
- return NOTIFY_BAD;
+ return notifier_from_errno(-EINVAL);
smp_call_function_single(cpu, iucv_retrieve_cpu, NULL, 1);
if (cpus_empty(iucv_irq_cpumask))
smp_call_function_single(first_cpu(iucv_buffer_cpumask),
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index c163d0a..98258b7 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -332,14 +332,16 @@
IEEE80211_QUEUE_STOP_REASON_AGGREGATION);
spin_unlock(&local->ampdu_lock);
- spin_unlock_bh(&sta->lock);
- /* send an addBA request */
+ /* prepare tid data */
sta->ampdu_mlme.dialog_token_allocator++;
sta->ampdu_mlme.tid_tx[tid]->dialog_token =
sta->ampdu_mlme.dialog_token_allocator;
sta->ampdu_mlme.tid_tx[tid]->ssn = start_seq_num;
+ spin_unlock_bh(&sta->lock);
+
+ /* send AddBA request */
ieee80211_send_addba_request(sdata, pubsta->addr, tid,
sta->ampdu_mlme.tid_tx[tid]->dialog_token,
sta->ampdu_mlme.tid_tx[tid]->ssn,
diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c
index 5d218c5..32be11e 100644
--- a/net/mac80211/chan.c
+++ b/net/mac80211/chan.c
@@ -5,7 +5,7 @@
#include <linux/nl80211.h>
#include "ieee80211_i.h"
-enum ieee80211_chan_mode
+static enum ieee80211_chan_mode
__ieee80211_get_channel_mode(struct ieee80211_local *local,
struct ieee80211_sub_if_data *ignore)
{
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index 4f22713..9c1da08 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -349,7 +349,7 @@
struct survey_info *survey)
{
int ret = -EOPNOTSUPP;
- if (local->ops->conf_tx)
+ if (local->ops->get_survey)
ret = local->ops->get_survey(&local->hw, idx, survey);
/* trace_drv_get_survey(local, idx, survey, ret); */
return ret;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 0839c4e..f803f8b 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1692,14 +1692,52 @@
rma = ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
break;
case IEEE80211_STYPE_ACTION:
- if (mgmt->u.action.category != WLAN_CATEGORY_SPECTRUM_MGMT)
- break;
+ switch (mgmt->u.action.category) {
+ case WLAN_CATEGORY_BACK: {
+ struct ieee80211_local *local = sdata->local;
+ int len = skb->len;
+ struct sta_info *sta;
- ieee80211_sta_process_chanswitch(sdata,
- &mgmt->u.action.u.chan_switch.sw_elem,
- (void *)ifmgd->associated->priv,
- rx_status->mactime);
- break;
+ rcu_read_lock();
+ sta = sta_info_get(sdata, mgmt->sa);
+ if (!sta) {
+ rcu_read_unlock();
+ break;
+ }
+
+ local_bh_disable();
+
+ switch (mgmt->u.action.u.addba_req.action_code) {
+ case WLAN_ACTION_ADDBA_REQ:
+ if (len < (IEEE80211_MIN_ACTION_SIZE +
+ sizeof(mgmt->u.action.u.addba_req)))
+ break;
+ ieee80211_process_addba_request(local, sta, mgmt, len);
+ break;
+ case WLAN_ACTION_ADDBA_RESP:
+ if (len < (IEEE80211_MIN_ACTION_SIZE +
+ sizeof(mgmt->u.action.u.addba_resp)))
+ break;
+ ieee80211_process_addba_resp(local, sta, mgmt, len);
+ break;
+ case WLAN_ACTION_DELBA:
+ if (len < (IEEE80211_MIN_ACTION_SIZE +
+ sizeof(mgmt->u.action.u.delba)))
+ break;
+ ieee80211_process_delba(sdata, sta, mgmt, len);
+ break;
+ }
+ local_bh_enable();
+ rcu_read_unlock();
+ break;
+ }
+ case WLAN_CATEGORY_SPECTRUM_MGMT:
+ ieee80211_sta_process_chanswitch(sdata,
+ &mgmt->u.action.u.chan_switch.sw_elem,
+ (void *)ifmgd->associated->priv,
+ rx_status->mactime);
+ break;
+ }
}
mutex_unlock(&ifmgd->mtx);
@@ -1722,9 +1760,45 @@
mutex_unlock(&ifmgd->mtx);
if (skb->len >= 24 + 2 /* mgmt + deauth reason */ &&
- (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_DEAUTH)
- cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
+ (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_DEAUTH) {
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_work *wk;
+ mutex_lock(&local->work_mtx);
+ list_for_each_entry(wk, &local->work_list, list) {
+ if (wk->sdata != sdata)
+ continue;
+
+ if (wk->type != IEEE80211_WORK_ASSOC)
+ continue;
+
+ if (memcmp(mgmt->bssid, wk->filter_ta, ETH_ALEN))
+ continue;
+ if (memcmp(mgmt->sa, wk->filter_ta, ETH_ALEN))
+ continue;
+
+ /*
+ * Printing the message only here means we can't
+ * spuriously print it, but it also means that it
+ * won't be printed when the frame comes in before
+ * we even tried to associate or in similar cases.
+ *
+ * Ultimately, I suspect cfg80211 should print the
+ * messages instead.
+ */
+ printk(KERN_DEBUG
+ "%s: deauthenticated from %pM (Reason: %u)\n",
+ sdata->name, mgmt->bssid,
+ le16_to_cpu(mgmt->u.deauth.reason_code));
+
+ list_del_rcu(&wk->list);
+ free_work(wk);
+ break;
+ }
+ mutex_unlock(&local->work_mtx);
+
+ cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
+ }
out:
kfree_skb(skb);
}
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 6e2a7bc..be9abc2 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1818,17 +1818,26 @@
return RX_CONTINUE;
if (ieee80211_is_back_req(bar->frame_control)) {
+ struct {
+ __le16 control, start_seq_num;
+ } __packed bar_data;
+
if (!rx->sta)
return RX_DROP_MONITOR;
+
+ if (skb_copy_bits(skb, offsetof(struct ieee80211_bar, control),
+ &bar_data, sizeof(bar_data)))
+ return RX_DROP_MONITOR;
+
spin_lock(&rx->sta->lock);
- tid = le16_to_cpu(bar->control) >> 12;
+ tid = le16_to_cpu(bar_data.control) >> 12;
if (!rx->sta->ampdu_mlme.tid_active_rx[tid]) {
spin_unlock(&rx->sta->lock);
return RX_DROP_MONITOR;
}
tid_agg_rx = rx->sta->ampdu_mlme.tid_rx[tid];
- start_seq_num = le16_to_cpu(bar->start_seq_num) >> 4;
+ start_seq_num = le16_to_cpu(bar_data.start_seq_num) >> 4;
/* reset session timer */
if (tid_agg_rx->timeout)
@@ -1935,6 +1944,9 @@
if (len < IEEE80211_MIN_ACTION_SIZE + 1)
break;
+ if (sdata->vif.type == NL80211_IFTYPE_STATION)
+ return ieee80211_sta_rx_mgmt(sdata, rx->skb);
+
switch (mgmt->u.action.u.addba_req.action_code) {
case WLAN_ACTION_ADDBA_REQ:
if (len < (IEEE80211_MIN_ACTION_SIZE +
diff --git a/net/mac80211/work.c b/net/mac80211/work.c
index be3d4a69..b025dc7 100644
--- a/net/mac80211/work.c
+++ b/net/mac80211/work.c
@@ -715,7 +715,7 @@
struct ieee80211_rx_status *rx_status;
struct ieee80211_mgmt *mgmt;
struct ieee80211_work *wk;
- enum work_action rma;
+ enum work_action rma = WORK_ACT_NONE;
u16 fc;
rx_status = (struct ieee80211_rx_status *) skb->cb;
diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
index d8f7e8e..ff04e9e 100644
--- a/net/netfilter/ipvs/ip_vs_conn.c
+++ b/net/netfilter/ipvs/ip_vs_conn.c
@@ -162,6 +162,7 @@
hash = ip_vs_conn_hashkey(cp->af, cp->protocol, &cp->caddr, cp->cport);
ct_write_lock(hash);
+ spin_lock(&cp->lock);
if (!(cp->flags & IP_VS_CONN_F_HASHED)) {
list_add(&cp->c_list, &ip_vs_conn_tab[hash]);
@@ -174,6 +175,7 @@
ret = 0;
}
+ spin_unlock(&cp->lock);
ct_write_unlock(hash);
return ret;
@@ -193,6 +195,7 @@
hash = ip_vs_conn_hashkey(cp->af, cp->protocol, &cp->caddr, cp->cport);
ct_write_lock(hash);
+ spin_lock(&cp->lock);
if (cp->flags & IP_VS_CONN_F_HASHED) {
list_del(&cp->c_list);
@@ -202,6 +205,7 @@
} else
ret = 0;
+ spin_unlock(&cp->lock);
ct_write_unlock(hash);
return ret;
diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index 445de70..e34622f 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -699,10 +699,8 @@
vfree(info->jumpstack);
else
kfree(info->jumpstack);
- if (sizeof(unsigned int) * nr_cpu_ids > PAGE_SIZE)
- vfree(info->stackptr);
- else
- kfree(info->stackptr);
+
+ free_percpu(info->stackptr);
kfree(info);
}
@@ -753,14 +751,9 @@
unsigned int size;
int cpu;
- size = sizeof(unsigned int) * nr_cpu_ids;
- if (size > PAGE_SIZE)
- i->stackptr = vmalloc(size);
- else
- i->stackptr = kmalloc(size, GFP_KERNEL);
+ i->stackptr = alloc_percpu(unsigned int);
if (i->stackptr == NULL)
return -ENOMEM;
- memset(i->stackptr, 0, size);
size = sizeof(void **) * nr_cpu_ids;
if (size > PAGE_SIZE)
@@ -844,10 +837,6 @@
struct xt_table_info *private;
struct xt_table *t, *table;
- ret = xt_jumpstack_alloc(newinfo);
- if (ret < 0)
- return ERR_PTR(ret);
-
/* Don't add one object to multiple lists. */
table = kmemdup(input_table, sizeof(struct xt_table), GFP_KERNEL);
if (!table) {
diff --git a/net/netfilter/xt_TEE.c b/net/netfilter/xt_TEE.c
index d7920d9..859d9fd 100644
--- a/net/netfilter/xt_TEE.c
+++ b/net/netfilter/xt_TEE.c
@@ -76,7 +76,7 @@
if (ip_route_output_key(net, &rt, &fl) != 0)
return false;
- dst_release(skb_dst(skb));
+ skb_dst_drop(skb);
skb_dst_set(skb, &rt->u.dst);
skb->dev = rt->u.dst.dev;
skb->protocol = htons(ETH_P_IP);
@@ -157,7 +157,7 @@
if (dst == NULL)
return false;
- dst_release(skb_dst(skb));
+ skb_dst_drop(skb);
skb_dst_set(skb, dst);
skb->dev = dst->dev;
skb->protocol = htons(ETH_P_IPV6);
diff --git a/net/phonet/pep.c b/net/phonet/pep.c
index 7b048a3..b2a3ae6 100644
--- a/net/phonet/pep.c
+++ b/net/phonet/pep.c
@@ -698,6 +698,7 @@
newsk = NULL;
goto out;
}
+ kfree_skb(oskb);
sock_hold(sk);
pep_sk(newsk)->listener = sk;
@@ -1045,12 +1046,12 @@
lock_sock(sk);
if ((1 << sk->sk_state) & ~(TCPF_CLOSE|TCPF_LISTEN)) {
skparent = pn->listener;
- sk_del_node_init(sk);
release_sock(sk);
- sk = skparent;
pn = pep_sk(skparent);
- lock_sock(sk);
+ lock_sock(skparent);
+ sk_del_node_init(sk);
+ sk = skparent;
}
/* Unhash a listening sock only when it is closed
* and all of its active connected pipes are closed. */
diff --git a/net/rds/ib_cm.c b/net/rds/ib_cm.c
index 10ed0d5..f688327 100644
--- a/net/rds/ib_cm.c
+++ b/net/rds/ib_cm.c
@@ -475,6 +475,7 @@
err = rds_ib_setup_qp(conn);
if (err) {
rds_ib_conn_error(conn, "rds_ib_setup_qp failed (%d)\n", err);
+ mutex_unlock(&conn->c_cm_lock);
goto out;
}
diff --git a/net/rds/iw_cm.c b/net/rds/iw_cm.c
index a9d951b..b5dd6ac 100644
--- a/net/rds/iw_cm.c
+++ b/net/rds/iw_cm.c
@@ -452,6 +452,7 @@
err = rds_iw_setup_qp(conn);
if (err) {
rds_iw_conn_error(conn, "rds_iw_setup_qp failed (%d)\n", err);
+ mutex_unlock(&conn->c_cm_lock);
goto out;
}
diff --git a/net/sched/act_nat.c b/net/sched/act_nat.c
index d885ba3..724553e 100644
--- a/net/sched/act_nat.c
+++ b/net/sched/act_nat.c
@@ -159,6 +159,9 @@
iph->daddr = new_addr;
csum_replace4(&iph->check, addr, new_addr);
+ } else if ((iph->frag_off & htons(IP_OFFSET)) ||
+ iph->protocol != IPPROTO_ICMP) {
+ goto out;
}
ihl = iph->ihl * 4;
@@ -202,7 +205,7 @@
{
struct icmphdr *icmph;
- if (!pskb_may_pull(skb, ihl + sizeof(*icmph) + sizeof(*iph)))
+ if (!pskb_may_pull(skb, ihl + sizeof(*icmph)))
goto drop;
icmph = (void *)(skb_network_header(skb) + ihl);
@@ -212,6 +215,9 @@
(icmph->type != ICMP_PARAMETERPROB))
break;
+ if (!pskb_may_pull(skb, ihl + sizeof(*icmph) + sizeof(*iph)))
+ goto drop;
+
iph = (void *)(icmph + 1);
if (egress)
addr = iph->daddr;
@@ -247,6 +253,7 @@
break;
}
+out:
return action;
drop:
diff --git a/net/sched/act_pedit.c b/net/sched/act_pedit.c
index fdbd0b7..50e3d94 100644
--- a/net/sched/act_pedit.c
+++ b/net/sched/act_pedit.c
@@ -125,7 +125,7 @@
{
struct tcf_pedit *p = a->priv;
int i, munged = 0;
- u8 *pptr;
+ unsigned int off;
if (!(skb->tc_verd & TC_OK2MUNGE)) {
/* should we set skb->cloned? */
@@ -134,7 +134,7 @@
}
}
- pptr = skb_network_header(skb);
+ off = skb_network_offset(skb);
spin_lock(&p->tcf_lock);
@@ -144,17 +144,17 @@
struct tc_pedit_key *tkey = p->tcfp_keys;
for (i = p->tcfp_nkeys; i > 0; i--, tkey++) {
- u32 *ptr;
+ u32 *ptr, _data;
int offset = tkey->off;
if (tkey->offmask) {
- if (skb->len > tkey->at) {
- char *j = pptr + tkey->at;
- offset += ((*j & tkey->offmask) >>
- tkey->shift);
- } else {
+ char *d, _d;
+
+ d = skb_header_pointer(skb, off + tkey->at, 1,
+ &_d);
+ if (!d)
goto bad;
- }
+ offset += (*d & tkey->offmask) >> tkey->shift;
}
if (offset % 4) {
@@ -169,9 +169,13 @@
goto bad;
}
- ptr = (u32 *)(pptr+offset);
+ ptr = skb_header_pointer(skb, off + offset, 4, &_data);
+ if (!ptr)
+ goto bad;
/* just do it, baby */
*ptr = ((*ptr & tkey->mask) ^ tkey->val);
+ if (ptr == &_data)
+ skb_store_bits(skb, off + offset, ptr, 4);
munged++;
}
diff --git a/net/sched/cls_u32.c b/net/sched/cls_u32.c
index 9627542..4f52214 100644
--- a/net/sched/cls_u32.c
+++ b/net/sched/cls_u32.c
@@ -98,11 +98,11 @@
{
struct {
struct tc_u_knode *knode;
- u8 *ptr;
+ unsigned int off;
} stack[TC_U32_MAXDEPTH];
struct tc_u_hnode *ht = (struct tc_u_hnode*)tp->root;
- u8 *ptr = skb_network_header(skb);
+ unsigned int off = skb_network_offset(skb);
struct tc_u_knode *n;
int sdepth = 0;
int off2 = 0;
@@ -134,8 +134,14 @@
#endif
for (i = n->sel.nkeys; i>0; i--, key++) {
+ unsigned int toff;
+ __be32 *data, _data;
- if ((*(__be32*)(ptr+key->off+(off2&key->offmask))^key->val)&key->mask) {
+ toff = off + key->off + (off2 & key->offmask);
+ data = skb_header_pointer(skb, toff, 4, &_data);
+ if (!data)
+ goto out;
+ if ((*data ^ key->val) & key->mask) {
n = n->next;
goto next_knode;
}
@@ -174,29 +180,45 @@
if (sdepth >= TC_U32_MAXDEPTH)
goto deadloop;
stack[sdepth].knode = n;
- stack[sdepth].ptr = ptr;
+ stack[sdepth].off = off;
sdepth++;
ht = n->ht_down;
sel = 0;
- if (ht->divisor)
- sel = ht->divisor&u32_hash_fold(*(__be32*)(ptr+n->sel.hoff), &n->sel,n->fshift);
+ if (ht->divisor) {
+ __be32 *data, _data;
+ data = skb_header_pointer(skb, off + n->sel.hoff, 4,
+ &_data);
+ if (!data)
+ goto out;
+ sel = ht->divisor & u32_hash_fold(*data, &n->sel,
+ n->fshift);
+ }
if (!(n->sel.flags&(TC_U32_VAROFFSET|TC_U32_OFFSET|TC_U32_EAT)))
goto next_ht;
if (n->sel.flags&(TC_U32_OFFSET|TC_U32_VAROFFSET)) {
off2 = n->sel.off + 3;
- if (n->sel.flags&TC_U32_VAROFFSET)
- off2 += ntohs(n->sel.offmask & *(__be16*)(ptr+n->sel.offoff)) >>n->sel.offshift;
+ if (n->sel.flags & TC_U32_VAROFFSET) {
+ __be16 *data, _data;
+
+ data = skb_header_pointer(skb,
+ off + n->sel.offoff,
+ 2, &_data);
+ if (!data)
+ goto out;
+ off2 += ntohs(n->sel.offmask & *data) >>
+ n->sel.offshift;
+ }
off2 &= ~3;
}
if (n->sel.flags&TC_U32_EAT) {
- ptr += off2;
+ off += off2;
off2 = 0;
}
- if (ptr < skb_tail_pointer(skb))
+ if (off < skb->len)
goto next_ht;
}
@@ -204,9 +226,10 @@
if (sdepth--) {
n = stack[sdepth].knode;
ht = n->ht_up;
- ptr = stack[sdepth].ptr;
+ off = stack[sdepth].off;
goto check_terminal;
}
+out:
return -1;
deadloop:
diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c
index 3415b6c..807643b 100644
--- a/net/sched/sch_teql.c
+++ b/net/sched/sch_teql.c
@@ -449,6 +449,7 @@
dev->tx_queue_len = 100;
dev->flags = IFF_NOARP;
dev->hard_header_len = LL_MAX_HEADER;
+ dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
}
static LIST_HEAD(master_dev_list);
diff --git a/net/sunrpc/auth.c b/net/sunrpc/auth.c
index 73affb8..8dc47f1 100644
--- a/net/sunrpc/auth.c
+++ b/net/sunrpc/auth.c
@@ -267,7 +267,7 @@
* Run memory cache shrinker.
*/
static int
-rpcauth_cache_shrinker(int nr_to_scan, gfp_t gfp_mask)
+rpcauth_cache_shrinker(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
{
LIST_HEAD(free);
int res;
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index b7cd8cc..7ca65c7 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -210,7 +210,8 @@
* State of TCP reply receive
*/
__be32 tcp_fraghdr,
- tcp_xid;
+ tcp_xid,
+ tcp_calldir;
u32 tcp_offset,
tcp_reclen;
@@ -927,7 +928,7 @@
{
size_t len, used;
u32 offset;
- __be32 calldir;
+ char *p;
/*
* We want transport->tcp_offset to be 8 at the end of this routine
@@ -936,26 +937,33 @@
* transport->tcp_offset is 4 (after having already read the xid).
*/
offset = transport->tcp_offset - sizeof(transport->tcp_xid);
- len = sizeof(calldir) - offset;
+ len = sizeof(transport->tcp_calldir) - offset;
dprintk("RPC: reading CALL/REPLY flag (%Zu bytes)\n", len);
- used = xdr_skb_read_bits(desc, &calldir, len);
+ p = ((char *) &transport->tcp_calldir) + offset;
+ used = xdr_skb_read_bits(desc, p, len);
transport->tcp_offset += used;
if (used != len)
return;
transport->tcp_flags &= ~TCP_RCV_READ_CALLDIR;
- transport->tcp_flags |= TCP_RCV_COPY_CALLDIR;
- transport->tcp_flags |= TCP_RCV_COPY_DATA;
/*
* We don't yet have the XDR buffer, so we will write the calldir
* out after we get the buffer from the 'struct rpc_rqst'
*/
- if (ntohl(calldir) == RPC_REPLY)
+ switch (ntohl(transport->tcp_calldir)) {
+ case RPC_REPLY:
+ transport->tcp_flags |= TCP_RCV_COPY_CALLDIR;
+ transport->tcp_flags |= TCP_RCV_COPY_DATA;
transport->tcp_flags |= TCP_RPC_REPLY;
- else
+ break;
+ case RPC_CALL:
+ transport->tcp_flags |= TCP_RCV_COPY_CALLDIR;
+ transport->tcp_flags |= TCP_RCV_COPY_DATA;
transport->tcp_flags &= ~TCP_RPC_REPLY;
- dprintk("RPC: reading %s CALL/REPLY flag %08x\n",
- (transport->tcp_flags & TCP_RPC_REPLY) ?
- "reply for" : "request with", calldir);
+ break;
+ default:
+ dprintk("RPC: invalid request message type\n");
+ xprt_force_disconnect(&transport->xprt);
+ }
xs_tcp_check_fraghdr(transport);
}
@@ -975,12 +983,10 @@
/*
* Save the RPC direction in the XDR buffer
*/
- __be32 calldir = transport->tcp_flags & TCP_RPC_REPLY ?
- htonl(RPC_REPLY) : 0;
-
memcpy(rcvbuf->head[0].iov_base + transport->tcp_copied,
- &calldir, sizeof(calldir));
- transport->tcp_copied += sizeof(calldir);
+ &transport->tcp_calldir,
+ sizeof(transport->tcp_calldir));
+ transport->tcp_copied += sizeof(transport->tcp_calldir);
transport->tcp_flags &= ~TCP_RCV_COPY_CALLDIR;
}
@@ -2293,6 +2299,7 @@
struct sockaddr *addr = args->dstaddr;
struct rpc_xprt *xprt;
struct sock_xprt *transport;
+ struct rpc_xprt *ret;
xprt = xs_setup_xprt(args, xprt_udp_slot_table_entries);
if (IS_ERR(xprt))
@@ -2330,8 +2337,8 @@
xs_format_peer_addresses(xprt, "udp", RPCBIND_NETID_UDP6);
break;
default:
- kfree(xprt);
- return ERR_PTR(-EAFNOSUPPORT);
+ ret = ERR_PTR(-EAFNOSUPPORT);
+ goto out_err;
}
if (xprt_bound(xprt))
@@ -2346,10 +2353,11 @@
if (try_module_get(THIS_MODULE))
return xprt;
-
+ ret = ERR_PTR(-EINVAL);
+out_err:
kfree(xprt->slot);
kfree(xprt);
- return ERR_PTR(-EINVAL);
+ return ret;
}
static const struct rpc_timeout xs_tcp_default_timeout = {
@@ -2368,6 +2376,7 @@
struct sockaddr *addr = args->dstaddr;
struct rpc_xprt *xprt;
struct sock_xprt *transport;
+ struct rpc_xprt *ret;
xprt = xs_setup_xprt(args, xprt_tcp_slot_table_entries);
if (IS_ERR(xprt))
@@ -2403,8 +2412,8 @@
xs_format_peer_addresses(xprt, "tcp", RPCBIND_NETID_TCP6);
break;
default:
- kfree(xprt);
- return ERR_PTR(-EAFNOSUPPORT);
+ ret = ERR_PTR(-EAFNOSUPPORT);
+ goto out_err;
}
if (xprt_bound(xprt))
@@ -2420,10 +2429,11 @@
if (try_module_get(THIS_MODULE))
return xprt;
-
+ ret = ERR_PTR(-EINVAL);
+out_err:
kfree(xprt->slot);
kfree(xprt);
- return ERR_PTR(-EINVAL);
+ return ret;
}
/**
@@ -2437,6 +2447,7 @@
struct rpc_xprt *xprt;
struct sock_xprt *transport;
struct svc_sock *bc_sock;
+ struct rpc_xprt *ret;
xprt = xs_setup_xprt(args, xprt_tcp_slot_table_entries);
if (IS_ERR(xprt))
@@ -2476,8 +2487,8 @@
RPCBIND_NETID_TCP6);
break;
default:
- kfree(xprt);
- return ERR_PTR(-EAFNOSUPPORT);
+ ret = ERR_PTR(-EAFNOSUPPORT);
+ goto out_err;
}
if (xprt_bound(xprt))
@@ -2499,9 +2510,11 @@
if (try_module_get(THIS_MODULE))
return xprt;
+ ret = ERR_PTR(-EINVAL);
+out_err:
kfree(xprt->slot);
kfree(xprt);
- return ERR_PTR(-EINVAL);
+ return ret;
}
static struct xprt_class xs_udp_transport = {
diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index 6a32915..a3cca0a 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -95,13 +95,13 @@
goto error_nolock;
}
- dst = dst_pop(dst);
+ dst = skb_dst_pop(skb);
if (!dst) {
XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTERROR);
err = -EHOSTUNREACH;
goto error_nolock;
}
- skb_dst_set(skb, dst);
+ skb_dst_set_noref(skb, dst);
x = dst->xfrm;
} while (x && !(x->outer_mode->flags & XFRM_MODE_FLAG_TUNNEL));
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index d965a2b..a7ec5a8 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1594,8 +1594,8 @@
/* Try to instantiate a bundle */
err = xfrm_tmpl_resolve(pols, num_pols, fl, xfrm, family);
- if (err < 0) {
- if (err != -EAGAIN)
+ if (err <= 0) {
+ if (err != 0 && err != -EAGAIN)
XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTPOLERROR);
return ERR_PTR(err);
}
@@ -1678,6 +1678,13 @@
goto make_dummy_bundle;
dst_hold(&xdst->u.dst);
return oldflo;
+ } else if (new_xdst == NULL) {
+ num_xfrms = 0;
+ if (oldflo == NULL)
+ goto make_dummy_bundle;
+ xdst->num_xfrms = 0;
+ dst_hold(&xdst->u.dst);
+ return oldflo;
}
/* Kill the previous bundle */
@@ -1760,6 +1767,10 @@
xfrm_pols_put(pols, num_pols);
err = PTR_ERR(xdst);
goto dropdst;
+ } else if (xdst == NULL) {
+ num_xfrms = 0;
+ drop_pols = num_pols;
+ goto no_transform;
}
spin_lock_bh(&xfrm_policy_sk_bundle_lock);
@@ -2153,6 +2164,7 @@
return 0;
}
+ skb_dst_force(skb);
dst = skb_dst(skb);
res = xfrm_lookup(net, &dst, &fl, NULL, 0) == 0;
@@ -2299,7 +2311,8 @@
return 0;
if (xdst->xfrm_genid != dst->xfrm->genid)
return 0;
- if (xdst->policy_genid != atomic_read(&xdst->pols[0]->genid))
+ if (xdst->num_pols > 0 &&
+ xdst->policy_genid != atomic_read(&xdst->pols[0]->genid))
return 0;
if (strict && fl &&
diff --git a/samples/tracepoints/tp-samples-trace.h b/samples/tracepoints/tp-samples-trace.h
index dffdc49..4d46be9 100644
--- a/samples/tracepoints/tp-samples-trace.h
+++ b/samples/tracepoints/tp-samples-trace.h
@@ -7,7 +7,5 @@
DECLARE_TRACE(subsys_event,
TP_PROTO(struct inode *inode, struct file *file),
TP_ARGS(inode, file));
-DECLARE_TRACE(subsys_eventb,
- TP_PROTO(void),
- TP_ARGS());
+DECLARE_TRACE_NOARGS(subsys_eventb);
#endif
diff --git a/samples/tracepoints/tracepoint-probe-sample.c b/samples/tracepoints/tracepoint-probe-sample.c
index 9e60eb6..744c0b9 100644
--- a/samples/tracepoints/tracepoint-probe-sample.c
+++ b/samples/tracepoints/tracepoint-probe-sample.c
@@ -13,7 +13,8 @@
* Here the caller only guarantees locking for struct file and struct inode.
* Locking must therefore be done in the probe to use the dentry.
*/
-static void probe_subsys_event(struct inode *inode, struct file *file)
+static void probe_subsys_event(void *ignore,
+ struct inode *inode, struct file *file)
{
path_get(&file->f_path);
dget(file->f_path.dentry);
@@ -23,7 +24,7 @@
path_put(&file->f_path);
}
-static void probe_subsys_eventb(void)
+static void probe_subsys_eventb(void *ignore)
{
printk(KERN_INFO "Event B is encountered\n");
}
@@ -32,9 +33,9 @@
{
int ret;
- ret = register_trace_subsys_event(probe_subsys_event);
+ ret = register_trace_subsys_event(probe_subsys_event, NULL);
WARN_ON(ret);
- ret = register_trace_subsys_eventb(probe_subsys_eventb);
+ ret = register_trace_subsys_eventb(probe_subsys_eventb, NULL);
WARN_ON(ret);
return 0;
@@ -44,8 +45,8 @@
static void __exit tp_sample_trace_exit(void)
{
- unregister_trace_subsys_eventb(probe_subsys_eventb);
- unregister_trace_subsys_event(probe_subsys_event);
+ unregister_trace_subsys_eventb(probe_subsys_eventb, NULL);
+ unregister_trace_subsys_event(probe_subsys_event, NULL);
tracepoint_synchronize_unregister();
}
diff --git a/samples/tracepoints/tracepoint-probe-sample2.c b/samples/tracepoints/tracepoint-probe-sample2.c
index be2a960..9fcf990 100644
--- a/samples/tracepoints/tracepoint-probe-sample2.c
+++ b/samples/tracepoints/tracepoint-probe-sample2.c
@@ -12,7 +12,8 @@
* Here the caller only guarantees locking for struct file and struct inode.
* Locking must therefore be done in the probe to use the dentry.
*/
-static void probe_subsys_event(struct inode *inode, struct file *file)
+static void probe_subsys_event(void *ignore,
+ struct inode *inode, struct file *file)
{
printk(KERN_INFO "Event is encountered with inode number %lu\n",
inode->i_ino);
@@ -22,7 +23,7 @@
{
int ret;
- ret = register_trace_subsys_event(probe_subsys_event);
+ ret = register_trace_subsys_event(probe_subsys_event, NULL);
WARN_ON(ret);
return 0;
@@ -32,7 +33,7 @@
static void __exit tp_sample_trace_exit(void)
{
- unregister_trace_subsys_event(probe_subsys_event);
+ unregister_trace_subsys_event(probe_subsys_event, NULL);
tracepoint_synchronize_unregister();
}
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 0b94d2f..e4deb73 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -82,7 +82,7 @@
lib-target := $(obj)/lib.a
endif
-ifneq ($(strip $(obj-y) $(obj-m) $(obj-n) $(obj-) $(lib-target)),)
+ifneq ($(strip $(obj-y) $(obj-m) $(obj-n) $(obj-) $(subdir-m) $(lib-target)),)
builtin-target := $(obj)/built-in.o
endif
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index cbcd654..54fd1b7 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -241,7 +241,7 @@
lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
(rm -f $@ ; false)
-quiet_cmd_lzo = LZO $@
+quiet_cmd_lzo = LZO $@
cmd_lzo = (cat $(filter-out FORCE,$^) | \
lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
(rm -f $@ ; false)
diff --git a/scripts/Makefile.modbuiltin b/scripts/Makefile.modbuiltin
index 102a276..1adb974 100644
--- a/scripts/Makefile.modbuiltin
+++ b/scripts/Makefile.modbuiltin
@@ -14,6 +14,11 @@
include scripts/Kbuild.include
+ifneq ($(KBUILD_SRC),)
+# Create output directory if not already present
+_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
+endif
+
# The filename Kbuild has precedence over Makefile
kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
diff --git a/scripts/checkincludes.pl b/scripts/checkincludes.pl
index 676ddc0..97b2c61 100755
--- a/scripts/checkincludes.pl
+++ b/scripts/checkincludes.pl
@@ -11,6 +11,8 @@
# you do have real dups and do not have them under #ifdef's. You
# could also just review the results.
+use strict;
+
sub usage {
print "Usage: checkincludes.pl [-r]\n";
print "By default we just warn of duplicates\n";
@@ -35,23 +37,24 @@
}
}
-foreach $file (@ARGV) {
- open(FILE, $file) or die "Cannot open $file: $!.\n";
+foreach my $file (@ARGV) {
+ open(my $f, '<', $file)
+ or die "Cannot open $file: $!.\n";
my %includedfiles = ();
my @file_lines = ();
- while (<FILE>) {
+ while (<$f>) {
if (m/^\s*#\s*include\s*[<"](\S*)[>"]/o) {
++$includedfiles{$1};
}
push(@file_lines, $_);
}
- close(FILE);
+ close($f);
if (!$remove) {
- foreach $filename (keys %includedfiles) {
+ foreach my $filename (keys %includedfiles) {
if ($includedfiles{$filename} > 1) {
print "$file: $filename is included more than once.\n";
}
@@ -59,27 +62,28 @@
next;
}
- open(FILE,">$file") || die("Cannot write to $file: $!");
+ open($f, '>', $file)
+ or die("Cannot write to $file: $!");
my $dups = 0;
foreach (@file_lines) {
if (m/^\s*#\s*include\s*[<"](\S*)[>"]/o) {
- foreach $filename (keys %includedfiles) {
+ foreach my $filename (keys %includedfiles) {
if ($1 eq $filename) {
if ($includedfiles{$filename} > 1) {
$includedfiles{$filename}--;
$dups++;
} else {
- print FILE $_;
+ print {$f} $_;
}
}
}
} else {
- print FILE $_;
+ print {$f} $_;
}
}
if ($dups > 0) {
print "$file: removed $dups duplicate includes\n";
}
- close(FILE);
+ close($f);
}
diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
index 14ee68e..1afff66 100755
--- a/scripts/checkstack.pl
+++ b/scripts/checkstack.pl
@@ -21,6 +21,8 @@
#
# TODO : Port to all architectures (one regex per arch)
+use strict;
+
# check for arch
#
# $re is used for two matches:
@@ -104,19 +106,11 @@
}
}
-sub bysize($) {
- my ($asize, $bsize);
- ($asize = $a) =~ s/.*: *(.*)$/$1/;
- ($bsize = $b) =~ s/.*: *(.*)$/$1/;
- $bsize <=> $asize
-}
-
#
# main()
#
my $funcre = qr/^$x* <(.*)>:$/;
-my $func;
-my $file, $lastslash;
+my ($func, $file, $lastslash);
while (my $line = <STDIN>) {
if ($line =~ m/$funcre/) {
@@ -173,4 +167,6 @@
}
}
-print sort bysize @stack;
+# Sort output by size (last field)
+print sort { ($b =~ /:\t*(\d+)$/)[0] <=> ($a =~ /:\t*(\d+)$/)[0] } @stack;
+
diff --git a/scripts/checkversion.pl b/scripts/checkversion.pl
index ec7d211..b444e89 100755
--- a/scripts/checkversion.pl
+++ b/scripts/checkversion.pl
@@ -5,23 +5,22 @@
# including <linux/version.h> that don't need it.
# Copyright (C) 2003, Randy Dunlap <rdunlap@xenotime.net>
+use strict;
+
$| = 1;
-my $debugging = 0;
+my $debugging;
-foreach $file (@ARGV)
-{
+foreach my $file (@ARGV) {
# Open this file.
- open(FILE, $file) || die "Can't open $file: $!\n";
+ open( my $f, '<', $file )
+ or die "Can't open $file: $!\n";
# Initialize variables.
- my $fInComment = 0;
- my $fInString = 0;
- my $fUseVersion = 0;
+ my ($fInComment, $fInString, $fUseVersion);
my $iLinuxVersion = 0;
- LINE: while ( <FILE> )
- {
+ while (<$f>) {
# Strip comments.
$fInComment && (s+^.*?\*/+ +o ? ($fInComment = 0) : next);
m+/\*+o && (s+/\*.*?\*/+ +go, (s+/\*.*$+ +o && ($fInComment = 1)));
@@ -43,8 +42,8 @@
# Look for uses: LINUX_VERSION_CODE, KERNEL_VERSION, UTS_RELEASE
if (($_ =~ /LINUX_VERSION_CODE/) || ($_ =~ /\WKERNEL_VERSION/)) {
$fUseVersion = 1;
- last LINE if $iLinuxVersion;
- }
+ last if $iLinuxVersion;
+ }
}
# Report used version IDs without include?
@@ -67,5 +66,5 @@
}
}
- close(FILE);
+ close($f);
}
diff --git a/scripts/decodecode b/scripts/decodecode
index 4b00647..8b30cc3 100755
--- a/scripts/decodecode
+++ b/scripts/decodecode
@@ -7,7 +7,7 @@
# AFLAGS=--32 decodecode < 386.oops
cleanup() {
- rm -f $T $T.s $T.o $T.oo $T.aa $T.aaa
+ rm -f $T $T.s $T.o $T.oo $T.aa $T.dis
exit 1
}
@@ -39,6 +39,29 @@
echo $code
code=`echo $code | sed -e 's/.*Code: //'`
+width=`expr index "$code" ' '`
+width=$[($width-1)/2]
+case $width in
+1) type=byte ;;
+2) type=2byte ;;
+4) type=4byte ;;
+esac
+
+disas() {
+ ${CROSS_COMPILE}as $AFLAGS -o $1.o $1.s &> /dev/null
+
+ if [ "$ARCH" == "arm" ]; then
+ if [ $width == 2 ]; then
+ OBJDUMPFLAGS="-M force-thumb"
+ fi
+
+ ${CROSS_COMPILE}strip $1.o
+ fi
+
+ ${CROSS_COMPILE}objdump $OBJDUMPFLAGS -S $1.o | \
+ grep -v "/tmp\|Disassembly\|\.text\|^$" &> $1.dis
+}
+
marker=`expr index "$code" "\<"`
if [ $marker -eq 0 ]; then
marker=`expr index "$code" "\("`
@@ -49,26 +72,25 @@
echo All code >> $T.oo
echo ======== >> $T.oo
beforemark=`echo "$code"`
- echo -n " .byte 0x" > $T.s
- echo $beforemark | sed -e 's/ /,0x/g' | sed -e 's/<//g' | sed -e 's/>//g' >> $T.s
- as $AFLAGS -o $T.o $T.s &> /dev/null
- objdump -S $T.o | grep -v "/tmp" | grep -v "Disassembly" | grep -v "\.text" | grep -v "^$" &> $T.ooo
- cat $T.ooo >> $T.oo
- rm -f $T.o $T.s $T.ooo
+ echo -n " .$type 0x" > $T.s
+ echo $beforemark | sed -e 's/ /,0x/g; s/[<>()]//g' >> $T.s
+ disas $T
+ cat $T.dis >> $T.oo
+ rm -f $T.o $T.s $T.dis
# and fix code at-and-after marker
code=`echo "$code" | cut -c$((${marker} + 1))-`
fi
echo Code starting with the faulting instruction > $T.aa
echo =========================================== >> $T.aa
-code=`echo $code | sed -e 's/ [<(]/ /;s/[>)] / /;s/ /,0x/g'`
-echo -n " .byte 0x" > $T.s
+code=`echo $code | sed -e 's/ [<(]/ /;s/[>)] / /;s/ /,0x/g; s/[>)]$//'`
+echo -n " .$type 0x" > $T.s
echo $code >> $T.s
-as $AFLAGS -o $T.o $T.s &> /dev/null
-objdump -S $T.o | grep -v "Disassembly" | grep -v "/tmp" | grep -v "\.text" | grep -v "^$" &> $T.aaa
-cat $T.aaa >> $T.aa
+disas $T
+cat $T.dis >> $T.aa
-faultline=`cat $T.aaa | head -1 | cut -d":" -f2`
+faultline=`cat $T.dis | head -1 | cut -d":" -f2`
+faultline=`echo "$faultline" | sed -e 's/\[/\\\[/g; s/\]/\\\]/g'`
cat $T.oo | sed -e "s/\($faultline\)/\*\1 <-- trapping instruction/g"
echo
diff --git a/scripts/export_report.pl b/scripts/export_report.pl
index 705b5ba..04dce7c 100644
--- a/scripts/export_report.pl
+++ b/scripts/export_report.pl
@@ -49,10 +49,10 @@
}
sub collectcfiles {
- my @file = `cat .tmp_versions/*.mod | grep '.*\.ko\$'`;
- @file = grep {s/\.ko/.mod.c/} @file;
- chomp @file;
- return @file;
+ my @file
+ = `cat .tmp_versions/*.mod | grep '.*\.ko\$' | sed s/\.ko$/.mod.c/`;
+ chomp @file;
+ return @file;
}
my (%SYMBOL, %MODULE, %opt, @allcfiles);
@@ -71,37 +71,40 @@
$opt{'k'} = "Module.symvers";
}
-unless (open(MODULE_SYMVERS, $opt{'k'})) {
- die "Sorry, cannot open $opt{'k'}: $!\n";
-}
+open (my $module_symvers, '<', $opt{'k'})
+ or die "Sorry, cannot open $opt{'k'}: $!\n";
if (defined $opt{'o'}) {
- unless (open(OUTPUT_HANDLE, ">$opt{'o'}")) {
- die "Sorry, cannot open $opt{'o'} $!\n";
- }
- select OUTPUT_HANDLE;
+ open (my $out, '>', $opt{'o'})
+ or die "Sorry, cannot open $opt{'o'} $!\n";
+
+ select $out;
}
+
#
# collect all the symbols and their attributes from the
# Module.symvers file
#
-while ( <MODULE_SYMVERS> ) {
+while ( <$module_symvers> ) {
chomp;
my (undef, $symbol, $module, $gpl) = split;
$SYMBOL { $symbol } = [ $module , "0" , $symbol, $gpl];
}
-close(MODULE_SYMVERS);
+close($module_symvers);
#
# collect the usage count of each symbol.
#
foreach my $thismod (@allcfiles) {
- unless (open(MODULE_MODULE, $thismod)) {
- print "Sorry, cannot open $thismod: $!\n";
+ my $module;
+
+ unless (open ($module, '<', $thismod)) {
+ warn "Sorry, cannot open $thismod: $!\n";
next;
}
+
my $state=0;
- while ( <MODULE_MODULE> ) {
+ while ( <$module> ) {
chomp;
if ($state == 0) {
$state = 1 if ($_ =~ /static const struct modversion_info/);
@@ -124,7 +127,7 @@
if ($state != 2) {
print "WARNING:$thismod is not built with CONFIG_MODVERSION enabled\n";
}
- close(MODULE_MODULE);
+ close($module);
}
print "\tThis file reports the exported symbols usage patterns by in-tree\n",
diff --git a/scripts/gen_initramfs_list.sh b/scripts/gen_initramfs_list.sh
index 76af5f9..5958fff 100644
--- a/scripts/gen_initramfs_list.sh
+++ b/scripts/gen_initramfs_list.sh
@@ -202,6 +202,7 @@
print_mtime "$1" >> ${output}
cat "$1" >> ${output}
else
+ echo "$1 \\"
cat "$1" | while read type dir file perm ; do
if [ "$type" == "file" ]; then
echo "$file \\";
@@ -231,7 +232,7 @@
case "$arg" in
"-l") # files included in initramfs - used by kbuild
dep_list="list_"
- echo "deps_initramfs := \\"
+ echo "deps_initramfs := $0 \\"
shift
;;
"-o") # generate compressed cpio image named $1
@@ -242,6 +243,7 @@
echo "$output_file" | grep -q "\.gz$" && compr="gzip -9 -f"
echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f"
echo "$output_file" | grep -q "\.lzma$" && compr="lzma -9 -f"
+ echo "$output_file" | grep -q "\.lzo$" && compr="lzop -9 -f"
echo "$output_file" | grep -q "\.cpio$" && compr="cat"
shift
;;
diff --git a/scripts/genksyms/genksyms.c b/scripts/genksyms/genksyms.c
index af6b836..f99115e 100644
--- a/scripts/genksyms/genksyms.c
+++ b/scripts/genksyms/genksyms.c
@@ -758,8 +758,10 @@
/* setlinebuf(debugfile); */
}
- if (flag_reference)
+ if (flag_reference) {
read_reference(ref_file);
+ fclose(ref_file);
+ }
yyparse();
diff --git a/scripts/headerdep.pl b/scripts/headerdep.pl
index b7f6c56..8dd019b 100755
--- a/scripts/headerdep.pl
+++ b/scripts/headerdep.pl
@@ -80,8 +80,7 @@
my $path = "$i/$filename";
return $path if -f $path;
}
-
- return undef;
+ return;
}
sub parse_all {
diff --git a/scripts/headers_check.pl b/scripts/headers_check.pl
index db1dd7a..50d6cfd 100644
--- a/scripts/headers_check.pl
+++ b/scripts/headers_check.pl
@@ -28,11 +28,12 @@
my $filename;
foreach my $file (@files) {
- local *FH;
$filename = $file;
- open(FH, "<$filename") or die "$filename: $!\n";
+
+ open(my $fh, '<', $filename)
+ or die "$filename: $!\n";
$lineno = 0;
- while ($line = <FH>) {
+ while ($line = <$fh>) {
$lineno++;
&check_include();
&check_asm_types();
@@ -40,7 +41,7 @@
&check_declarations();
# Dropped for now. Too much noise &check_config();
}
- close FH;
+ close $fh;
}
exit $ret;
@@ -78,7 +79,7 @@
}
my $linux_asm_types;
-sub check_asm_types()
+sub check_asm_types
{
if ($filename =~ /types.h|int-l64.h|int-ll64.h/o) {
return;
diff --git a/scripts/headers_install.pl b/scripts/headers_install.pl
index b89ca2c..4ca3be3 100644
--- a/scripts/headers_install.pl
+++ b/scripts/headers_install.pl
@@ -23,13 +23,13 @@
my $unifdef = "scripts/unifdef -U__KERNEL__ -D__EXPORTED_HEADERS__";
foreach my $file (@files) {
- local *INFILE;
- local *OUTFILE;
my $tmpfile = "$installdir/$file.tmp";
- open(INFILE, "<$readdir/$file")
- or die "$readdir/$file: $!\n";
- open(OUTFILE, ">$tmpfile") or die "$tmpfile: $!\n";
- while (my $line = <INFILE>) {
+
+ open(my $in, '<', "$readdir/$file")
+ or die "$readdir/$file: $!\n";
+ open(my $out, '>', $tmpfile)
+ or die "$tmpfile: $!\n";
+ while (my $line = <$in>) {
$line =~ s/([\s(])__user\s/$1/g;
$line =~ s/([\s(])__force\s/$1/g;
$line =~ s/([\s(])__iomem\s/$1/g;
@@ -39,10 +39,11 @@
$line =~ s/(^|\s)(inline)\b/$1__$2__/g;
$line =~ s/(^|\s)(asm)\b(\s|[(]|$)/$1__$2__$3/g;
$line =~ s/(^|\s|[(])(volatile)\b(\s|[(]|$)/$1__$2__$3/g;
- printf OUTFILE "%s", $line;
+ printf {$out} "%s", $line;
}
- close OUTFILE;
- close INFILE;
+ close $out;
+ close $in;
+
system $unifdef . " $tmpfile > $installdir/$file";
unlink $tmpfile;
}
diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index 86c3896..e3902fb 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -108,8 +108,10 @@
rc = fscanf(in, "%llx %c %499s\n", &s->addr, &stype, str);
if (rc != 3) {
if (rc != EOF) {
- /* skip line */
- fgets(str, 500, in);
+ /* skip line. sym is used as dummy to
+ * shut of "warn_unused_result" warning.
+ */
+ sym = fgets(str, 500, in);
}
return -1;
}
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index 186c466..7ea649d 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -23,6 +23,9 @@
config: $(obj)/conf
$< $(Kconfig)
+nconfig: $(obj)/nconf
+ $< $(Kconfig)
+
oldconfig: $(obj)/conf
$< -o $(Kconfig)
@@ -120,6 +123,7 @@
# Help text used by make help
help:
@echo ' config - Update current config utilising a line-oriented program'
+ @echo ' nconfig - Update current config utilising a ncurses menu based program'
@echo ' menuconfig - Update current config utilising a menu based program'
@echo ' xconfig - Update current config utilising a QT based front-end'
@echo ' gconfig - Update current config utilising a GTK based front-end'
@@ -147,6 +151,8 @@
# ===========================================================================
# Shared Makefile for the various kconfig executables:
# conf: Used for defconfig, oldconfig and related targets
+# nconf: Used for the nconfig target.
+# Utilizes ncurses
# mconf: Used for the menuconfig target
# Utilizes the lxdialog package
# qconf: Used for the xconfig target
@@ -159,11 +165,16 @@
lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o
conf-objs := conf.o zconf.tab.o
-mconf-objs := mconf.o zconf.tab.o $(lxdialog)
+mconf-objs := mconf.o zconf.tab.o $(lxdialog)
+nconf-objs := nconf.o zconf.tab.o nconf.gui.o
kxgettext-objs := kxgettext.o zconf.tab.o
hostprogs-y := conf qconf gconf kxgettext
+ifeq ($(MAKECMDGOALS),nconfig)
+ hostprogs-y += nconf
+endif
+
ifeq ($(MAKECMDGOALS),menuconfig)
hostprogs-y += mconf
endif
@@ -187,7 +198,7 @@
clean-files := lkc_defs.h qconf.moc .tmp_qtcheck \
.tmp_gtkcheck zconf.tab.c lex.zconf.c zconf.hash.c gconf.glade.h
-clean-files += mconf qconf gconf
+clean-files += mconf qconf gconf nconf
clean-files += config.pot linux.pot
# Check that we have the required ncurses stuff installed for lxdialog (menuconfig)
@@ -208,10 +219,11 @@
HOSTLOADLIBES_qconf = $(KC_QT_LIBS) -ldl
HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK
-HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
+HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0` -ldl
HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
-D LKC_DIRECT_LINK
+HOSTLOADLIBES_nconf = -lmenu -lpanel -lncurses
$(obj)/qconf.o: $(obj)/.tmp_qtcheck
ifeq ($(qconf-target),1)
diff --git a/scripts/kconfig/expr.c b/scripts/kconfig/expr.c
index edd3f39..d83f232 100644
--- a/scripts/kconfig/expr.c
+++ b/scripts/kconfig/expr.c
@@ -1097,9 +1097,32 @@
static void expr_print_gstr_helper(void *data, struct symbol *sym, const char *str)
{
- str_append((struct gstr*)data, str);
+ struct gstr *gs = (struct gstr*)data;
+ const char *sym_str = NULL;
+
if (sym)
- str_printf((struct gstr*)data, " [=%s]", sym_get_string_value(sym));
+ sym_str = sym_get_string_value(sym);
+
+ if (gs->max_width) {
+ unsigned extra_length = strlen(str);
+ const char *last_cr = strrchr(gs->s, '\n');
+ unsigned last_line_length;
+
+ if (sym_str)
+ extra_length += 4 + strlen(sym_str);
+
+ if (!last_cr)
+ last_cr = gs->s;
+
+ last_line_length = strlen(gs->s) - (last_cr - gs->s);
+
+ if ((last_line_length + extra_length) > gs->max_width)
+ str_append(gs, "\\\n");
+ }
+
+ str_append(gs, str);
+ if (sym)
+ str_printf(gs, " [=%s]", sym_str);
}
void expr_gstr_print(struct expr *e, struct gstr *gs)
diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h
index 6408fef..891cd9c 100644
--- a/scripts/kconfig/expr.h
+++ b/scripts/kconfig/expr.h
@@ -86,7 +86,7 @@
struct expr_value rev_dep;
};
-#define for_all_symbols(i, sym) for (i = 0; i < 257; i++) for (sym = symbol_hash[i]; sym; sym = sym->next) if (sym->type != S_OTHER)
+#define for_all_symbols(i, sym) for (i = 0; i < SYMBOL_HASHSIZE; i++) for (sym = symbol_hash[i]; sym; sym = sym->next) if (sym->type != S_OTHER)
#define SYMBOL_CONST 0x0001 /* symbol is const */
#define SYMBOL_CHECK 0x0008 /* used during dependency checking */
@@ -108,8 +108,7 @@
#define SYMBOL_DEF4 0x80000 /* symbol.def[S_DEF_4] is valid */
#define SYMBOL_MAXLENGTH 256
-#define SYMBOL_HASHSIZE 257
-#define SYMBOL_HASHMASK 0xff
+#define SYMBOL_HASHSIZE 9973
/* A property represent the config options that can be associated
* with a config "symbol".
diff --git a/scripts/kconfig/gconf.c b/scripts/kconfig/gconf.c
index 6546436..bef1041 100644
--- a/scripts/kconfig/gconf.c
+++ b/scripts/kconfig/gconf.c
@@ -30,13 +30,16 @@
SINGLE_VIEW, SPLIT_VIEW, FULL_VIEW
};
+enum {
+ OPT_NORMAL, OPT_ALL, OPT_PROMPT
+};
+
static gint view_mode = FULL_VIEW;
static gboolean show_name = TRUE;
static gboolean show_range = TRUE;
static gboolean show_value = TRUE;
-static gboolean show_all = FALSE;
-static gboolean show_debug = FALSE;
static gboolean resizeable = FALSE;
+static int opt_mode = OPT_NORMAL;
GtkWidget *main_wnd = NULL;
GtkWidget *tree1_w = NULL; // left frame
@@ -76,36 +79,7 @@
/* Helping/Debugging Functions */
-
-const char *dbg_print_stype(int val)
-{
- static char buf[256];
-
- bzero(buf, 256);
-
- if (val == S_UNKNOWN)
- strcpy(buf, "unknown");
- if (val == S_BOOLEAN)
- strcpy(buf, "boolean");
- if (val == S_TRISTATE)
- strcpy(buf, "tristate");
- if (val == S_INT)
- strcpy(buf, "int");
- if (val == S_HEX)
- strcpy(buf, "hex");
- if (val == S_STRING)
- strcpy(buf, "string");
- if (val == S_OTHER)
- strcpy(buf, "other");
-
-#ifdef DEBUG
- printf("%s", buf);
-#endif
-
- return buf;
-}
-
-const char *dbg_print_flags(int val)
+const char *dbg_sym_flags(int val)
{
static char buf[256];
@@ -131,40 +105,10 @@
strcat(buf, "auto/");
buf[strlen(buf) - 1] = '\0';
-#ifdef DEBUG
- printf("%s", buf);
-#endif
return buf;
}
-const char *dbg_print_ptype(int val)
-{
- static char buf[256];
-
- bzero(buf, 256);
-
- if (val == P_UNKNOWN)
- strcpy(buf, "unknown");
- if (val == P_PROMPT)
- strcpy(buf, "prompt");
- if (val == P_COMMENT)
- strcpy(buf, "comment");
- if (val == P_MENU)
- strcpy(buf, "menu");
- if (val == P_DEFAULT)
- strcpy(buf, "default");
- if (val == P_CHOICE)
- strcpy(buf, "choice");
-
-#ifdef DEBUG
- printf("%s", buf);
-#endif
-
- return buf;
-}
-
-
void replace_button_icon(GladeXML * xml, GdkDrawable * window,
GtkStyle * style, gchar * btn_name, gchar ** xpm)
{
@@ -697,20 +641,29 @@
void
-on_show_all_options1_activate(GtkMenuItem * menuitem, gpointer user_data)
+on_set_option_mode1_activate(GtkMenuItem *menuitem, gpointer user_data)
{
- show_all = GTK_CHECK_MENU_ITEM(menuitem)->active;
-
+ opt_mode = OPT_NORMAL;
gtk_tree_store_clear(tree2);
- display_tree(&rootmenu); // instead of update_tree to speed-up
+ display_tree(&rootmenu); /* instead of update_tree to speed-up */
}
void
-on_show_debug_info1_activate(GtkMenuItem * menuitem, gpointer user_data)
+on_set_option_mode2_activate(GtkMenuItem *menuitem, gpointer user_data)
{
- show_debug = GTK_CHECK_MENU_ITEM(menuitem)->active;
- update_tree(&rootmenu, NULL);
+ opt_mode = OPT_ALL;
+ gtk_tree_store_clear(tree2);
+ display_tree(&rootmenu); /* instead of update_tree to speed-up */
+}
+
+
+void
+on_set_option_mode3_activate(GtkMenuItem *menuitem, gpointer user_data)
+{
+ opt_mode = OPT_PROMPT;
+ gtk_tree_store_clear(tree2);
+ display_tree(&rootmenu); /* instead of update_tree to speed-up */
}
@@ -1163,7 +1116,10 @@
g_strdup_printf("%s %s", _(menu_get_prompt(menu)),
sym && sym_has_value(sym) ? "(NEW)" : "");
- if (show_all && !menu_is_visible(menu))
+ if (opt_mode == OPT_ALL && !menu_is_visible(menu))
+ row[COL_COLOR] = g_strdup("DarkGray");
+ else if (opt_mode == OPT_PROMPT &&
+ menu_has_prompt(menu) && !menu_is_visible(menu))
row[COL_COLOR] = g_strdup("DarkGray");
else
row[COL_COLOR] = g_strdup("Black");
@@ -1386,16 +1342,19 @@
menu2 ? menu_get_prompt(menu2) : "nil");
#endif
- if (!menu_is_visible(child1) && !show_all) { // remove node
+ if ((opt_mode == OPT_NORMAL && !menu_is_visible(child1)) ||
+ (opt_mode == OPT_PROMPT && !menu_has_prompt(child1))) {
+
+ /* remove node */
if (gtktree_iter_find_node(dst, menu1) != NULL) {
memcpy(&tmp, child2, sizeof(GtkTreeIter));
valid = gtk_tree_model_iter_next(model2,
child2);
gtk_tree_store_remove(tree2, &tmp);
if (!valid)
- return; // next parent
+ return; /* next parent */
else
- goto reparse; // next child
+ goto reparse; /* next child */
} else
continue;
}
@@ -1464,17 +1423,19 @@
&& (tree == tree2))
continue;
- if (menu_is_visible(child) || show_all)
+ if ((opt_mode == OPT_NORMAL && menu_is_visible(child)) ||
+ (opt_mode == OPT_PROMPT && menu_has_prompt(child)) ||
+ (opt_mode == OPT_ALL))
place_node(child, fill_row(child));
#ifdef DEBUG
printf("%*c%s: ", indent, ' ', menu_get_prompt(child));
printf("%s", child->flags & MENU_ROOT ? "rootmenu | " : "");
- dbg_print_ptype(ptype);
+ printf("%s", prop_get_type_name(ptype));
printf(" | ");
if (sym) {
- dbg_print_stype(sym->type);
+ printf("%s", sym_type_name(sym->type));
printf(" | ");
- dbg_print_flags(sym->flags);
+ printf("%s", dbg_sym_flags(sym->flags));
printf("\n");
} else
printf("\n");
diff --git a/scripts/kconfig/gconf.glade b/scripts/kconfig/gconf.glade
index b1c86c1..d52b0a7 100644
--- a/scripts/kconfig/gconf.glade
+++ b/scripts/kconfig/gconf.glade
@@ -190,26 +190,40 @@
</child>
<child>
- <widget class="GtkCheckMenuItem" id="show_all_options1">
+ <widget class="GtkRadioMenuItem" id="set_option_mode1">
+ <property name="visible">True</property>
+ <property name="tooltip" translatable="yes">Show normal options</property>
+ <property name="label" translatable="yes">Show normal options</property>
+ <property name="use_underline">True</property>
+ <property name="active">True</property>
+ <signal name="activate" handler="on_set_option_mode1_activate"/>
+ </widget>
+ </child>
+
+ <child>
+ <widget class="GtkRadioMenuItem" id="set_option_mode2">
<property name="visible">True</property>
<property name="tooltip" translatable="yes">Show all options</property>
<property name="label" translatable="yes">Show all _options</property>
<property name="use_underline">True</property>
<property name="active">False</property>
- <signal name="activate" handler="on_show_all_options1_activate"/>
+ <property name="group">set_option_mode1</property>
+ <signal name="activate" handler="on_set_option_mode2_activate"/>
</widget>
</child>
<child>
- <widget class="GtkCheckMenuItem" id="show_debug_info1">
+ <widget class="GtkRadioMenuItem" id="set_option_mode3">
<property name="visible">True</property>
- <property name="tooltip" translatable="yes">Show masked options</property>
- <property name="label" translatable="yes">Show _debug info</property>
+ <property name="tooltip" translatable="yes">Show all options with prompts</property>
+ <property name="label" translatable="yes">Show all prompt options</property>
<property name="use_underline">True</property>
<property name="active">False</property>
- <signal name="activate" handler="on_show_debug_info1_activate"/>
+ <property name="group">set_option_mode1</property>
+ <signal name="activate" handler="on_set_option_mode3_activate"/>
</widget>
</child>
+
</widget>
</child>
</widget>
diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h
index f379b0b..ce6549c 100644
--- a/scripts/kconfig/lkc.h
+++ b/scripts/kconfig/lkc.h
@@ -84,7 +84,7 @@
void kconfig_load(void);
/* menu.c */
-void menu_init(void);
+void _menu_init(void);
void menu_warn(struct menu *menu, const char *fmt, ...);
struct menu *menu_add_menu(void);
void menu_end_menu(void);
@@ -106,6 +106,11 @@
struct gstr {
size_t len;
char *s;
+ /*
+ * when max_width is not zero long lines in string s (if any) get
+ * wrapped not to exceed the max_width value
+ */
+ int max_width;
};
struct gstr str_new(void);
struct gstr str_assign(const char *s);
diff --git a/scripts/kconfig/lkc_proto.h b/scripts/kconfig/lkc_proto.h
index ffeb532..7cadcad 100644
--- a/scripts/kconfig/lkc_proto.h
+++ b/scripts/kconfig/lkc_proto.h
@@ -11,13 +11,15 @@
/* menu.c */
P(rootmenu,struct menu,);
-P(menu_is_visible,bool,(struct menu *menu));
+P(menu_is_visible, bool, (struct menu *menu));
+P(menu_has_prompt, bool, (struct menu *menu));
P(menu_get_prompt,const char *,(struct menu *menu));
P(menu_get_root_menu,struct menu *,(struct menu *menu));
P(menu_get_parent_menu,struct menu *,(struct menu *menu));
P(menu_has_help,bool,(struct menu *menu));
P(menu_get_help,const char *,(struct menu *menu));
-P(get_symbol_str,void,(struct gstr *r, struct symbol *sym));
+P(get_symbol_str, void, (struct gstr *r, struct symbol *sym));
+P(get_relations_str, struct gstr, (struct symbol **sym_arr));
P(menu_get_ext_help,void,(struct menu *menu, struct gstr *help));
/* symbol.c */
diff --git a/scripts/kconfig/lxdialog/inputbox.c b/scripts/kconfig/lxdialog/inputbox.c
index 616c601..dd8e587 100644
--- a/scripts/kconfig/lxdialog/inputbox.c
+++ b/scripts/kconfig/lxdialog/inputbox.c
@@ -180,7 +180,7 @@
case KEY_LEFT:
switch (button) {
case -1:
- button = 1; /* Indicates "Cancel" button is selected */
+ button = 1; /* Indicates "Help" button is selected */
print_buttons(dialog, height, width, 1);
break;
case 0:
@@ -204,7 +204,7 @@
print_buttons(dialog, height, width, 0);
break;
case 0:
- button = 1; /* Indicates "Cancel" button is selected */
+ button = 1; /* Indicates "Help" button is selected */
print_buttons(dialog, height, width, 1);
break;
case 1:
diff --git a/scripts/kconfig/lxdialog/menubox.c b/scripts/kconfig/lxdialog/menubox.c
index fa9d633..1d60473 100644
--- a/scripts/kconfig/lxdialog/menubox.c
+++ b/scripts/kconfig/lxdialog/menubox.c
@@ -383,6 +383,10 @@
case 'n':
case 'm':
case '/':
+ case 'h':
+ case '?':
+ case 'z':
+ case '\n':
/* save scroll info */
*s_scroll = scroll;
delwin(menu);
@@ -390,8 +394,10 @@
item_set(scroll + choice);
item_set_selected(1);
switch (key) {
+ case 'h':
+ case '?':
+ return 2;
case 's':
- return 3;
case 'y':
return 3;
case 'n':
@@ -402,18 +408,12 @@
return 6;
case '/':
return 7;
+ case 'z':
+ return 8;
+ case '\n':
+ return button;
}
return 0;
- case 'h':
- case '?':
- button = 2;
- case '\n':
- *s_scroll = scroll;
- delwin(menu);
- delwin(dialog);
- item_set(scroll + choice);
- item_set_selected(1);
- return button;
case 'e':
case 'x':
key = KEY_ESC;
diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index 8413cf3..2c83d32 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -67,13 +67,15 @@
" there is a delayed response which you may find annoying.\n"
"\n"
" Also, the <TAB> and cursor keys will cycle between <Select>,\n"
-" <Exit> and <Help>\n"
+" <Exit> and <Help>.\n"
"\n"
"o To get help with an item, use the cursor keys to highlight <Help>\n"
-" and Press <ENTER>.\n"
+" and press <ENTER>.\n"
"\n"
" Shortcut: Press <H> or <?>.\n"
"\n"
+"o To show hidden options, press <Z>.\n"
+"\n"
"\n"
"Radiolists (Choice lists)\n"
"-----------\n"
@@ -272,6 +274,7 @@
static struct menu *current_menu;
static int child_count;
static int single_menu_mode;
+static int show_all_options;
static void conf(struct menu *menu);
static void conf_choice(struct menu *menu);
@@ -282,19 +285,6 @@
static void show_helptext(const char *title, const char *text);
static void show_help(struct menu *menu);
-static struct gstr get_relations_str(struct symbol **sym_arr)
-{
- struct symbol *sym;
- struct gstr res = str_new();
- int i;
-
- for (i = 0; sym_arr && (sym = sym_arr[i]); i++)
- get_symbol_str(&res, sym);
- if (!i)
- str_append(&res, _("No matches found.\n"));
- return res;
-}
-
static char filename[PATH_MAX+1];
static void set_config_filename(const char *config_filename)
{
@@ -359,8 +349,16 @@
int type, tmp, doint = 2;
tristate val;
char ch;
+ bool visible;
- if (!menu_is_visible(menu))
+ /*
+ * note: menu_is_visible() has side effect that it will
+ * recalc the value of the symbol.
+ */
+ visible = menu_is_visible(menu);
+ if (show_all_options && !menu_has_prompt(menu))
+ return;
+ else if (!show_all_options && !visible)
return;
sym = menu->sym;
@@ -619,6 +617,9 @@
case 7:
search_conf();
break;
+ case 8:
+ show_all_options = !show_all_options;
+ break;
}
}
}
@@ -638,6 +639,7 @@
{
struct gstr help = str_new();
+ help.max_width = getmaxx(stdscr) - 10;
menu_get_ext_help(menu, &help);
show_helptext(_(menu_get_prompt(menu)), str_get(&help));
diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c
index 059a246..203632c 100644
--- a/scripts/kconfig/menu.c
+++ b/scripts/kconfig/menu.c
@@ -38,7 +38,7 @@
va_end(ap);
}
-void menu_init(void)
+void _menu_init(void)
{
current_entry = current_menu = &rootmenu;
last_entry_ptr = &rootmenu.list;
@@ -197,7 +197,7 @@
if ((sym->type == S_STRING || sym->type == S_INT || sym->type == S_HEX) &&
prop->expr->type != E_SYMBOL)
prop_warn(prop,
- "default for config symbol '%'"
+ "default for config symbol '%s'"
" must be a single symbol", sym->name);
break;
case P_SELECT:
@@ -390,6 +390,13 @@
}
}
+bool menu_has_prompt(struct menu *menu)
+{
+ if (!menu->prompt)
+ return false;
+ return true;
+}
+
bool menu_is_visible(struct menu *menu)
{
struct menu *child;
@@ -398,6 +405,7 @@
if (!menu->prompt)
return false;
+
sym = menu->sym;
if (sym) {
sym_calc_value(sym);
@@ -407,12 +415,14 @@
if (visible != no)
return true;
+
if (!sym || sym_get_tristate_value(menu->sym) == no)
return false;
for (child = menu->list; child; child = child->next)
if (menu_is_visible(child))
return true;
+
return false;
}
@@ -515,6 +525,20 @@
str_append(r, "\n\n");
}
+struct gstr get_relations_str(struct symbol **sym_arr)
+{
+ struct symbol *sym;
+ struct gstr res = str_new();
+ int i;
+
+ for (i = 0; sym_arr && (sym = sym_arr[i]); i++)
+ get_symbol_str(&res, sym);
+ if (!i)
+ str_append(&res, _("No matches found.\n"));
+ return res;
+}
+
+
void menu_get_ext_help(struct menu *menu, struct gstr *help)
{
struct symbol *sym = menu->sym;
diff --git a/scripts/kconfig/nconf.c b/scripts/kconfig/nconf.c
new file mode 100644
index 0000000..762caf8
--- /dev/null
+++ b/scripts/kconfig/nconf.c
@@ -0,0 +1,1568 @@
+/*
+ * Copyright (C) 2008 Nir Tzachar <nir.tzachar@gmail.com?
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ * Derived from menuconfig.
+ *
+ */
+#define LKC_DIRECT_LINK
+#include "lkc.h"
+#include "nconf.h"
+
+static const char nconf_readme[] = N_(
+"Overview\n"
+"--------\n"
+"Some kernel features may be built directly into the kernel.\n"
+"Some may be made into loadable runtime modules. Some features\n"
+"may be completely removed altogether. There are also certain\n"
+"kernel parameters which are not really features, but must be\n"
+"entered in as decimal or hexadecimal numbers or possibly text.\n"
+"\n"
+"Menu items beginning with following braces represent features that\n"
+" [ ] can be built in or removed\n"
+" < > can be built in, modularized or removed\n"
+" { } can be built in or modularized (selected by other feature)\n"
+" - - are selected by other feature,\n"
+" XXX cannot be selected. use Symbol Info to find out why,\n"
+"while *, M or whitespace inside braces means to build in, build as\n"
+"a module or to exclude the feature respectively.\n"
+"\n"
+"To change any of these features, highlight it with the cursor\n"
+"keys and press <Y> to build it in, <M> to make it a module or\n"
+"<N> to removed it. You may also press the <Space Bar> to cycle\n"
+"through the available options (ie. Y->N->M->Y).\n"
+"\n"
+"Some additional keyboard hints:\n"
+"\n"
+"Menus\n"
+"----------\n"
+"o Use the Up/Down arrow keys (cursor keys) to highlight the item\n"
+" you wish to change use <Enter> or <Space>. Goto submenu by \n"
+" pressing <Enter> of <right-arrow>. Use <Esc> or <left-arrow> to go back.\n"
+" Submenus are designated by \"--->\".\n"
+"\n"
+" Shortcut: Press the option's highlighted letter (hotkey).\n"
+" Pressing a hotkey more than once will sequence\n"
+" through all visible items which use that hotkey.\n"
+"\n"
+" You may also use the <PAGE UP> and <PAGE DOWN> keys to scroll\n"
+" unseen options into view.\n"
+"\n"
+"o To exit a menu use the just press <ESC> <F5> <F8> or <left-arrow>.\n"
+"\n"
+"o To get help with an item, press <F1>\n"
+" Shortcut: Press <h> or <?>.\n"
+"\n"
+"\n"
+"Radiolists (Choice lists)\n"
+"-----------\n"
+"o Use the cursor keys to select the option you wish to set and press\n"
+" <S> or the <SPACE BAR>.\n"
+"\n"
+" Shortcut: Press the first letter of the option you wish to set then\n"
+" press <S> or <SPACE BAR>.\n"
+"\n"
+"o To see available help for the item, press <F1>\n"
+" Shortcut: Press <H> or <?>.\n"
+"\n"
+"\n"
+"Data Entry\n"
+"-----------\n"
+"o Enter the requested information and press <ENTER>\n"
+" If you are entering hexadecimal values, it is not necessary to\n"
+" add the '0x' prefix to the entry.\n"
+"\n"
+"o For help, press <F1>.\n"
+"\n"
+"\n"
+"Text Box (Help Window)\n"
+"--------\n"
+"o Use the cursor keys to scroll up/down/left/right. The VI editor\n"
+" keys h,j,k,l function here as do <SPACE BAR> for those\n"
+" who are familiar with less and lynx.\n"
+"\n"
+"o Press <Enter>, <F1>, <F5>, <F7> or <Esc> to exit.\n"
+"\n"
+"\n"
+"Alternate Configuration Files\n"
+"-----------------------------\n"
+"nconfig supports the use of alternate configuration files for\n"
+"those who, for various reasons, find it necessary to switch\n"
+"between different kernel configurations.\n"
+"\n"
+"At the end of the main menu you will find two options. One is\n"
+"for saving the current configuration to a file of your choosing.\n"
+"The other option is for loading a previously saved alternate\n"
+"configuration.\n"
+"\n"
+"Even if you don't use alternate configuration files, but you\n"
+"find during a nconfig session that you have completely messed\n"
+"up your settings, you may use the \"Load Alternate...\" option to\n"
+"restore your previously saved settings from \".config\" without\n"
+"restarting nconfig.\n"
+"\n"
+"Other information\n"
+"-----------------\n"
+"If you use nconfig in an XTERM window make sure you have your\n"
+"$TERM variable set to point to a xterm definition which supports color.\n"
+"Otherwise, nconfig will look rather bad. nconfig will not\n"
+"display correctly in a RXVT window because rxvt displays only one\n"
+"intensity of color, bright.\n"
+"\n"
+"nconfig will display larger menus on screens or xterms which are\n"
+"set to display more than the standard 25 row by 80 column geometry.\n"
+"In order for this to work, the \"stty size\" command must be able to\n"
+"display the screen's current row and column geometry. I STRONGLY\n"
+"RECOMMEND that you make sure you do NOT have the shell variables\n"
+"LINES and COLUMNS exported into your environment. Some distributions\n"
+"export those variables via /etc/profile. Some ncurses programs can\n"
+"become confused when those variables (LINES & COLUMNS) don't reflect\n"
+"the true screen size.\n"
+"\n"
+"Optional personality available\n"
+"------------------------------\n"
+"If you prefer to have all of the kernel options listed in a single\n"
+"menu, rather than the default multimenu hierarchy, run the nconfig\n"
+"with NCONFIG_MODE environment variable set to single_menu. Example:\n"
+"\n"
+"make NCONFIG_MODE=single_menu nconfig\n"
+"\n"
+"<Enter> will then unroll the appropriate category, or enfold it if it\n"
+"is already unrolled.\n"
+"\n"
+"Note that this mode can eventually be a little more CPU expensive\n"
+"(especially with a larger number of unrolled categories) than the\n"
+"default mode.\n"
+"\n"),
+menu_no_f_instructions[] = N_(
+" You do not have function keys support. Please follow the\n"
+" following instructions:\n"
+" Arrow keys navigate the menu.\n"
+" <Enter> or <right-arrow> selects submenus --->.\n"
+" Capital Letters are hotkeys.\n"
+" Pressing <Y> includes, <N> excludes, <M> modularizes features.\n"
+" Pressing SpaceBar toggles between the above options\n"
+" Press <Esc> or <left-arrow> to go back one menu, \n"
+" <?> or <h> for Help, </> for Search.\n"
+" <1> is interchangable with <F1>, <2> with <F2>, etc.\n"
+" Legend: [*] built-in [ ] excluded <M> module < > module capable.\n"
+" <Esc> always leaves the current window\n"),
+menu_instructions[] = N_(
+" Arrow keys navigate the menu.\n"
+" <Enter> or <right-arrow> selects submenus --->.\n"
+" Capital Letters are hotkeys.\n"
+" Pressing <Y> includes, <N> excludes, <M> modularizes features.\n"
+" Pressing SpaceBar toggles between the above options\n"
+" Press <Esc>, <F3> or <left-arrow> to go back one menu, \n"
+" <?>, <F1> or <h> for Help, </> for Search.\n"
+" <1> is interchangable with <F1>, <2> with <F2>, etc.\n"
+" Legend: [*] built-in [ ] excluded <M> module < > module capable.\n"
+" <Esc> always leaves the current window\n"),
+radiolist_instructions[] = N_(
+" Use the arrow keys to navigate this window or\n"
+" press the hotkey of the item you wish to select\n"
+" followed by the <SPACE BAR>.\n"
+" Press <?>, <F1> or <h> for additional information about this option.\n"),
+inputbox_instructions_int[] = N_(
+"Please enter a decimal value.\n"
+"Fractions will not be accepted.\n"
+"Press <RETURN> to accept, <ESC> to cancel."),
+inputbox_instructions_hex[] = N_(
+"Please enter a hexadecimal value.\n"
+"Press <RETURN> to accept, <ESC> to cancel."),
+inputbox_instructions_string[] = N_(
+"Please enter a string value.\n"
+"Press <RETURN> to accept, <ESC> to cancel."),
+setmod_text[] = N_(
+"This feature depends on another which\n"
+"has been configured as a module.\n"
+"As a result, this feature will be built as a module."),
+nohelp_text[] = N_(
+"There is no help available for this kernel option.\n"),
+load_config_text[] = N_(
+"Enter the name of the configuration file you wish to load.\n"
+"Accept the name shown to restore the configuration you\n"
+"last retrieved. Leave blank to abort."),
+load_config_help[] = N_(
+"\n"
+"For various reasons, one may wish to keep several different kernel\n"
+"configurations available on a single machine.\n"
+"\n"
+"If you have saved a previous configuration in a file other than the\n"
+"kernel's default, entering the name of the file here will allow you\n"
+"to modify that configuration.\n"
+"\n"
+"If you are uncertain, then you have probably never used alternate\n"
+"configuration files. You should therefor leave this blank to abort.\n"),
+save_config_text[] = N_(
+"Enter a filename to which this configuration should be saved\n"
+"as an alternate. Leave blank to abort."),
+save_config_help[] = N_(
+"\n"
+"For various reasons, one may wish to keep different kernel\n"
+"configurations available on a single machine.\n"
+"\n"
+"Entering a file name here will allow you to later retrieve, modify\n"
+"and use the current configuration as an alternate to whatever\n"
+"configuration options you have selected at that time.\n"
+"\n"
+"If you are uncertain what all this means then you should probably\n"
+"leave this blank.\n"),
+search_help[] = N_(
+"\n"
+"Search for CONFIG_ symbols and display their relations.\n"
+"Regular expressions are allowed.\n"
+"Example: search for \"^FOO\"\n"
+"Result:\n"
+"-----------------------------------------------------------------\n"
+"Symbol: FOO [ = m]\n"
+"Prompt: Foo bus is used to drive the bar HW\n"
+"Defined at drivers/pci/Kconfig:47\n"
+"Depends on: X86_LOCAL_APIC && X86_IO_APIC || IA64\n"
+"Location:\n"
+" -> Bus options (PCI, PCMCIA, EISA, MCA, ISA)\n"
+" -> PCI support (PCI [ = y])\n"
+" -> PCI access mode (<choice> [ = y])\n"
+"Selects: LIBCRC32\n"
+"Selected by: BAR\n"
+"-----------------------------------------------------------------\n"
+"o The line 'Prompt:' shows the text used in the menu structure for\n"
+" this CONFIG_ symbol\n"
+"o The 'Defined at' line tell at what file / line number the symbol\n"
+" is defined\n"
+"o The 'Depends on:' line tell what symbols needs to be defined for\n"
+" this symbol to be visible in the menu (selectable)\n"
+"o The 'Location:' lines tell where in the menu structure this symbol\n"
+" is located\n"
+" A location followed by a [ = y] indicate that this is a selectable\n"
+" menu item - and current value is displayed inside brackets.\n"
+"o The 'Selects:' line tell what symbol will be automatically\n"
+" selected if this symbol is selected (y or m)\n"
+"o The 'Selected by' line tell what symbol has selected this symbol\n"
+"\n"
+"Only relevant lines are shown.\n"
+"\n\n"
+"Search examples:\n"
+"Examples: USB = > find all CONFIG_ symbols containing USB\n"
+" ^USB => find all CONFIG_ symbols starting with USB\n"
+" USB$ => find all CONFIG_ symbols ending with USB\n"
+"\n");
+
+struct mitem {
+ char str[256];
+ char tag;
+ void *usrptr;
+ int is_hot;
+ int is_visible;
+};
+
+#define MAX_MENU_ITEMS 4096
+static int show_all_items;
+static int indent;
+static struct menu *current_menu;
+static int child_count;
+static int single_menu_mode;
+/* the window in which all information appears */
+static WINDOW *main_window;
+/* the largest size of the menu window */
+static int mwin_max_lines;
+static int mwin_max_cols;
+/* the window in which we show option buttons */
+static MENU *curses_menu;
+static ITEM *curses_menu_items[MAX_MENU_ITEMS];
+static struct mitem k_menu_items[MAX_MENU_ITEMS];
+static int items_num;
+static int global_exit;
+/* the currently selected button */
+const char *current_instructions = menu_instructions;
+/* this array is used to implement hot keys. it is updated in item_make and
+ * resetted in clean_items. It would be better to use a hash, but lets keep it
+ * simple... */
+#define MAX_SAME_KEY MAX_MENU_ITEMS
+struct {
+ int count;
+ int ptrs[MAX_MENU_ITEMS];
+} hotkeys[1<<(sizeof(char)*8)];
+
+static void conf(struct menu *menu);
+static void conf_choice(struct menu *menu);
+static void conf_string(struct menu *menu);
+static void conf_load(void);
+static void conf_save(void);
+static void show_help(struct menu *menu);
+static int do_exit(void);
+static void setup_windows(void);
+
+typedef void (*function_key_handler_t)(int *key, struct menu *menu);
+static void handle_f1(int *key, struct menu *current_item);
+static void handle_f2(int *key, struct menu *current_item);
+static void handle_f3(int *key, struct menu *current_item);
+static void handle_f4(int *key, struct menu *current_item);
+static void handle_f5(int *key, struct menu *current_item);
+static void handle_f6(int *key, struct menu *current_item);
+static void handle_f7(int *key, struct menu *current_item);
+static void handle_f8(int *key, struct menu *current_item);
+
+struct function_keys {
+ const char *key_str;
+ const char *func;
+ function_key key;
+ function_key_handler_t handler;
+};
+
+static const int function_keys_num = 8;
+struct function_keys function_keys[] = {
+ {
+ .key_str = "F1",
+ .func = "Help",
+ .key = F_HELP,
+ .handler = handle_f1,
+ },
+ {
+ .key_str = "F2",
+ .func = "Symbol Info",
+ .key = F_SYMBOL,
+ .handler = handle_f2,
+ },
+ {
+ .key_str = "F3",
+ .func = "Instructions",
+ .key = F_INSTS,
+ .handler = handle_f3,
+ },
+ {
+ .key_str = "F4",
+ .func = "Config",
+ .key = F_CONF,
+ .handler = handle_f4,
+ },
+ {
+ .key_str = "F5",
+ .func = "Back",
+ .key = F_BACK,
+ .handler = handle_f5,
+ },
+ {
+ .key_str = "F6",
+ .func = "Save",
+ .key = F_SAVE,
+ .handler = handle_f6,
+ },
+ {
+ .key_str = "F7",
+ .func = "Load",
+ .key = F_LOAD,
+ .handler = handle_f7,
+ },
+ {
+ .key_str = "F8",
+ .func = "Exit",
+ .key = F_EXIT,
+ .handler = handle_f8,
+ },
+};
+
+static void print_function_line(void)
+{
+ int i;
+ int offset = 1;
+ const int skip = 1;
+
+ for (i = 0; i < function_keys_num; i++) {
+ wattrset(main_window, attributes[FUNCTION_HIGHLIGHT]);
+ mvwprintw(main_window, LINES-3, offset,
+ "%s",
+ function_keys[i].key_str);
+ wattrset(main_window, attributes[FUNCTION_TEXT]);
+ offset += strlen(function_keys[i].key_str);
+ mvwprintw(main_window, LINES-3,
+ offset, "%s",
+ function_keys[i].func);
+ offset += strlen(function_keys[i].func) + skip;
+ }
+ wattrset(main_window, attributes[NORMAL]);
+}
+
+/* help */
+static void handle_f1(int *key, struct menu *current_item)
+{
+ show_scroll_win(main_window,
+ _("README"), _(nconf_readme));
+ return;
+}
+
+/* symbole help */
+static void handle_f2(int *key, struct menu *current_item)
+{
+ show_help(current_item);
+ return;
+}
+
+/* instructions */
+static void handle_f3(int *key, struct menu *current_item)
+{
+ show_scroll_win(main_window,
+ _("Instructions"),
+ _(current_instructions));
+ return;
+}
+
+/* config */
+static void handle_f4(int *key, struct menu *current_item)
+{
+ int res = btn_dialog(main_window,
+ _("Show all symbols?"),
+ 2,
+ " <Show All> ",
+ "<Don't show all>");
+ if (res == 0)
+ show_all_items = 1;
+ else if (res == 1)
+ show_all_items = 0;
+
+ return;
+}
+
+/* back */
+static void handle_f5(int *key, struct menu *current_item)
+{
+ *key = KEY_LEFT;
+ return;
+}
+
+/* save */
+static void handle_f6(int *key, struct menu *current_item)
+{
+ conf_save();
+ return;
+}
+
+/* load */
+static void handle_f7(int *key, struct menu *current_item)
+{
+ conf_load();
+ return;
+}
+
+/* exit */
+static void handle_f8(int *key, struct menu *current_item)
+{
+ do_exit();
+ return;
+}
+
+/* return != 0 to indicate the key was handles */
+static int process_special_keys(int *key, struct menu *menu)
+{
+ int i;
+
+ if (*key == KEY_RESIZE) {
+ setup_windows();
+ return 1;
+ }
+
+ for (i = 0; i < function_keys_num; i++) {
+ if (*key == KEY_F(function_keys[i].key) ||
+ *key == '0' + function_keys[i].key){
+ function_keys[i].handler(key, menu);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static void clean_items(void)
+{
+ int i;
+ for (i = 0; curses_menu_items[i]; i++)
+ free_item(curses_menu_items[i]);
+ bzero(curses_menu_items, sizeof(curses_menu_items));
+ bzero(k_menu_items, sizeof(k_menu_items));
+ bzero(hotkeys, sizeof(hotkeys));
+ items_num = 0;
+}
+
+/* return the index of the next hot item, or -1 if no such item exists */
+static int get_next_hot(int c)
+{
+ static int hot_index;
+ static int hot_char;
+
+ if (c < 0 || c > 255 || hotkeys[c].count <= 0)
+ return -1;
+
+ if (hot_char == c) {
+ hot_index = (hot_index+1)%hotkeys[c].count;
+ return hotkeys[c].ptrs[hot_index];
+ } else {
+ hot_char = c;
+ hot_index = 0;
+ return hotkeys[c].ptrs[0];
+ }
+}
+
+/* can the char c be a hot key? no, if c is a common shortcut used elsewhere */
+static int canbhot(char c)
+{
+ c = tolower(c);
+ return isalnum(c) && c != 'y' && c != 'm' && c != 'h' &&
+ c != 'n' && c != '?';
+}
+
+/* check if str already contains a hot key. */
+static int is_hot(int index)
+{
+ return k_menu_items[index].is_hot;
+}
+
+/* find the first possible hot key, and mark it.
+ * index is the index of the item in the menu
+ * return 0 on success*/
+static int make_hot(char *dest, int len, const char *org, int index)
+{
+ int position = -1;
+ int i;
+ int tmp;
+ int c;
+ int org_len = strlen(org);
+
+ if (org == NULL || is_hot(index))
+ return 1;
+
+ /* make sure not to make hot keys out of markers.
+ * find where to start looking for a hot key
+ */
+ i = 0;
+ /* skip white space */
+ while (i < org_len && org[i] == ' ')
+ i++;
+ if (i == org_len)
+ return -1;
+ /* if encountering '(' or '<' or '[', find the match and look from there
+ **/
+ if (org[i] == '[' || org[i] == '<' || org[i] == '(') {
+ i++;
+ for (; i < org_len; i++)
+ if (org[i] == ']' || org[i] == '>' || org[i] == ')')
+ break;
+ }
+ if (i == org_len)
+ return -1;
+ for (; i < org_len; i++) {
+ if (canbhot(org[i]) && org[i-1] != '<' && org[i-1] != '(') {
+ position = i;
+ break;
+ }
+ }
+ if (position == -1)
+ return 1;
+
+ /* ok, char at org[position] should be a hot key to this item */
+ c = tolower(org[position]);
+ tmp = hotkeys[c].count;
+ hotkeys[c].ptrs[tmp] = index;
+ hotkeys[c].count++;
+ /*
+ snprintf(dest, len, "%.*s(%c)%s", position, org, org[position],
+ &org[position+1]);
+ */
+ /* make org[position] uppercase, and all leading letter small case */
+ strncpy(dest, org, len);
+ for (i = 0; i < position; i++)
+ dest[i] = tolower(dest[i]);
+ dest[position] = toupper(dest[position]);
+ k_menu_items[index].is_hot = 1;
+ return 0;
+}
+
+/* Make a new item. Add a hotkey mark in the first possible letter.
+ * As ncurses does not allow any attributes inside menue item, we mark the
+ * hot key as the first capitalized letter in the string */
+static void item_make(struct menu *menu, char tag, const char *fmt, ...)
+{
+ va_list ap;
+ char tmp_str[256];
+
+ if (items_num > MAX_MENU_ITEMS-1)
+ return;
+
+ bzero(&k_menu_items[items_num], sizeof(k_menu_items[0]));
+ k_menu_items[items_num].tag = tag;
+ k_menu_items[items_num].usrptr = menu;
+ if (menu != NULL)
+ k_menu_items[items_num].is_visible =
+ menu_is_visible(menu);
+ else
+ k_menu_items[items_num].is_visible = 1;
+
+ va_start(ap, fmt);
+ vsnprintf(tmp_str, sizeof(tmp_str), fmt, ap);
+ if (!k_menu_items[items_num].is_visible)
+ memcpy(tmp_str, "XXX", 3);
+ va_end(ap);
+ if (make_hot(
+ k_menu_items[items_num].str,
+ sizeof(k_menu_items[items_num].str), tmp_str, items_num) != 0)
+ strncpy(k_menu_items[items_num].str,
+ tmp_str,
+ sizeof(k_menu_items[items_num].str));
+
+ curses_menu_items[items_num] = new_item(
+ k_menu_items[items_num].str,
+ k_menu_items[items_num].str);
+ set_item_userptr(curses_menu_items[items_num],
+ &k_menu_items[items_num]);
+ /*
+ if (!k_menu_items[items_num].is_visible)
+ item_opts_off(curses_menu_items[items_num], O_SELECTABLE);
+ */
+
+ items_num++;
+ curses_menu_items[items_num] = NULL;
+}
+
+/* very hackish. adds a string to the last item added */
+static void item_add_str(const char *fmt, ...)
+{
+ va_list ap;
+ int index = items_num-1;
+ char new_str[256];
+ char tmp_str[256];
+
+ if (index < 0)
+ return;
+
+ va_start(ap, fmt);
+ vsnprintf(new_str, sizeof(new_str), fmt, ap);
+ va_end(ap);
+ snprintf(tmp_str, sizeof(tmp_str), "%s%s",
+ k_menu_items[index].str, new_str);
+ if (make_hot(k_menu_items[index].str,
+ sizeof(k_menu_items[index].str), tmp_str, index) != 0)
+ strncpy(k_menu_items[index].str,
+ tmp_str,
+ sizeof(k_menu_items[index].str));
+
+ free_item(curses_menu_items[index]);
+ curses_menu_items[index] = new_item(
+ k_menu_items[index].str,
+ k_menu_items[index].str);
+ set_item_userptr(curses_menu_items[index],
+ &k_menu_items[index]);
+}
+
+/* get the tag of the currently selected item */
+static char item_tag(void)
+{
+ ITEM *cur;
+ struct mitem *mcur;
+
+ cur = current_item(curses_menu);
+ if (cur == NULL)
+ return 0;
+ mcur = (struct mitem *) item_userptr(cur);
+ return mcur->tag;
+}
+
+static int curses_item_index(void)
+{
+ return item_index(current_item(curses_menu));
+}
+
+static void *item_data(void)
+{
+ ITEM *cur;
+ struct mitem *mcur;
+
+ cur = current_item(curses_menu);
+ mcur = (struct mitem *) item_userptr(cur);
+ return mcur->usrptr;
+
+}
+
+static int item_is_tag(char tag)
+{
+ return item_tag() == tag;
+}
+
+static char filename[PATH_MAX+1];
+static char menu_backtitle[PATH_MAX+128];
+static const char *set_config_filename(const char *config_filename)
+{
+ int size;
+ struct symbol *sym;
+
+ sym = sym_lookup("KERNELVERSION", 0);
+ sym_calc_value(sym);
+ size = snprintf(menu_backtitle, sizeof(menu_backtitle),
+ _("%s - Linux Kernel v%s Configuration"),
+ config_filename, sym_get_string_value(sym));
+ if (size >= sizeof(menu_backtitle))
+ menu_backtitle[sizeof(menu_backtitle)-1] = '\0';
+
+ size = snprintf(filename, sizeof(filename), "%s", config_filename);
+ if (size >= sizeof(filename))
+ filename[sizeof(filename)-1] = '\0';
+ return menu_backtitle;
+}
+
+/* command = 0 is supress, 1 is restore */
+static void supress_stdout(int command)
+{
+ static FILE *org_stdout;
+ static FILE *org_stderr;
+
+ if (command == 0) {
+ org_stdout = stdout;
+ org_stderr = stderr;
+ stdout = fopen("/dev/null", "a");
+ stderr = fopen("/dev/null", "a");
+ } else {
+ fclose(stdout);
+ fclose(stderr);
+ stdout = org_stdout;
+ stderr = org_stderr;
+ }
+}
+
+/* return = 0 means we are successful.
+ * -1 means go on doing what you were doing
+ */
+static int do_exit(void)
+{
+ int res;
+ if (!conf_get_changed()) {
+ global_exit = 1;
+ return 0;
+ }
+ res = btn_dialog(main_window,
+ _("Do you wish to save your "
+ "new kernel configuration?\n"
+ "<ESC> to cancel and resume nconfig."),
+ 2,
+ " <save> ",
+ "<don't save>");
+ if (res == KEY_EXIT) {
+ global_exit = 0;
+ return -1;
+ }
+
+ /* if we got here, the user really wants to exit */
+ switch (res) {
+ case 0:
+ supress_stdout(0);
+ res = conf_write(filename);
+ supress_stdout(1);
+ if (res)
+ btn_dialog(
+ main_window,
+ _("Error during writing of the kernel "
+ "configuration.\n"
+ "Your kernel configuration "
+ "changes were NOT saved."),
+ 1,
+ "<OK>");
+ else {
+ char buf[1024];
+ snprintf(buf, 1024,
+ _("Configuration written to %s\n"
+ "End of Linux kernel configuration.\n"
+ "Execute 'make' to build the kernel or try"
+ " 'make help'."), filename);
+ btn_dialog(
+ main_window,
+ buf,
+ 1,
+ "<OK>");
+ }
+ break;
+ default:
+ btn_dialog(
+ main_window,
+ _("Your kernel configuration changes were NOT saved."),
+ 1,
+ "<OK>");
+ break;
+ }
+ global_exit = 1;
+ return 0;
+}
+
+
+static void search_conf(void)
+{
+ struct symbol **sym_arr;
+ struct gstr res;
+ char dialog_input_result[100];
+ char *dialog_input;
+ int dres;
+again:
+ dres = dialog_inputbox(main_window,
+ _("Search Configuration Parameter"),
+ _("Enter CONFIG_ (sub)string to search for "
+ "(with or without \"CONFIG\")"),
+ "", dialog_input_result, 99);
+ switch (dres) {
+ case 0:
+ break;
+ case 1:
+ show_scroll_win(main_window,
+ _("Search Configuration"), search_help);
+ goto again;
+ default:
+ return;
+ }
+
+ /* strip CONFIG_ if necessary */
+ dialog_input = dialog_input_result;
+ if (strncasecmp(dialog_input_result, "CONFIG_", 7) == 0)
+ dialog_input += 7;
+
+ sym_arr = sym_re_search(dialog_input);
+ res = get_relations_str(sym_arr);
+ free(sym_arr);
+ show_scroll_win(main_window,
+ _("Search Results"), str_get(&res));
+ str_free(&res);
+}
+
+
+static void build_conf(struct menu *menu)
+{
+ struct symbol *sym;
+ struct property *prop;
+ struct menu *child;
+ int type, tmp, doint = 2;
+ tristate val;
+ char ch;
+
+ if (!menu || (!show_all_items && !menu_is_visible(menu)))
+ return;
+
+ sym = menu->sym;
+ prop = menu->prompt;
+ if (!sym) {
+ if (prop && menu != current_menu) {
+ const char *prompt = menu_get_prompt(menu);
+ enum prop_type ptype;
+ ptype = menu->prompt ? menu->prompt->type : P_UNKNOWN;
+ switch (ptype) {
+ case P_MENU:
+ child_count++;
+ prompt = _(prompt);
+ if (single_menu_mode) {
+ item_make(menu, 'm',
+ "%s%*c%s",
+ menu->data ? "-->" : "++>",
+ indent + 1, ' ', prompt);
+ } else
+ item_make(menu, 'm',
+ " %*c%s --->",
+ indent + 1,
+ ' ', prompt);
+
+ if (single_menu_mode && menu->data)
+ goto conf_childs;
+ return;
+ case P_COMMENT:
+ if (prompt) {
+ child_count++;
+ item_make(menu, ':',
+ " %*c*** %s ***",
+ indent + 1, ' ',
+ _(prompt));
+ }
+ break;
+ default:
+ if (prompt) {
+ child_count++;
+ item_make(menu, ':', "---%*c%s",
+ indent + 1, ' ',
+ _(prompt));
+ }
+ }
+ } else
+ doint = 0;
+ goto conf_childs;
+ }
+
+ type = sym_get_type(sym);
+ if (sym_is_choice(sym)) {
+ struct symbol *def_sym = sym_get_choice_value(sym);
+ struct menu *def_menu = NULL;
+
+ child_count++;
+ for (child = menu->list; child; child = child->next) {
+ if (menu_is_visible(child) && child->sym == def_sym)
+ def_menu = child;
+ }
+
+ val = sym_get_tristate_value(sym);
+ if (sym_is_changable(sym)) {
+ switch (type) {
+ case S_BOOLEAN:
+ item_make(menu, 't', "[%c]",
+ val == no ? ' ' : '*');
+ break;
+ case S_TRISTATE:
+ switch (val) {
+ case yes:
+ ch = '*';
+ break;
+ case mod:
+ ch = 'M';
+ break;
+ default:
+ ch = ' ';
+ break;
+ }
+ item_make(menu, 't', "<%c>", ch);
+ break;
+ }
+ } else {
+ item_make(menu, def_menu ? 't' : ':', " ");
+ }
+
+ item_add_str("%*c%s", indent + 1,
+ ' ', _(menu_get_prompt(menu)));
+ if (val == yes) {
+ if (def_menu) {
+ item_add_str(" (%s)",
+ _(menu_get_prompt(def_menu)));
+ item_add_str(" --->");
+ if (def_menu->list) {
+ indent += 2;
+ build_conf(def_menu);
+ indent -= 2;
+ }
+ }
+ return;
+ }
+ } else {
+ if (menu == current_menu) {
+ item_make(menu, ':',
+ "---%*c%s", indent + 1,
+ ' ', _(menu_get_prompt(menu)));
+ goto conf_childs;
+ }
+ child_count++;
+ val = sym_get_tristate_value(sym);
+ if (sym_is_choice_value(sym) && val == yes) {
+ item_make(menu, ':', " ");
+ } else {
+ switch (type) {
+ case S_BOOLEAN:
+ if (sym_is_changable(sym))
+ item_make(menu, 't', "[%c]",
+ val == no ? ' ' : '*');
+ else
+ item_make(menu, 't', "-%c-",
+ val == no ? ' ' : '*');
+ break;
+ case S_TRISTATE:
+ switch (val) {
+ case yes:
+ ch = '*';
+ break;
+ case mod:
+ ch = 'M';
+ break;
+ default:
+ ch = ' ';
+ break;
+ }
+ if (sym_is_changable(sym)) {
+ if (sym->rev_dep.tri == mod)
+ item_make(menu,
+ 't', "{%c}", ch);
+ else
+ item_make(menu,
+ 't', "<%c>", ch);
+ } else
+ item_make(menu, 't', "-%c-", ch);
+ break;
+ default:
+ tmp = 2 + strlen(sym_get_string_value(sym));
+ item_make(menu, 's', " (%s)",
+ sym_get_string_value(sym));
+ tmp = indent - tmp + 4;
+ if (tmp < 0)
+ tmp = 0;
+ item_add_str("%*c%s%s", tmp, ' ',
+ _(menu_get_prompt(menu)),
+ (sym_has_value(sym) ||
+ !sym_is_changable(sym)) ? "" :
+ _(" (NEW)"));
+ goto conf_childs;
+ }
+ }
+ item_add_str("%*c%s%s", indent + 1, ' ',
+ _(menu_get_prompt(menu)),
+ (sym_has_value(sym) || !sym_is_changable(sym)) ?
+ "" : _(" (NEW)"));
+ if (menu->prompt && menu->prompt->type == P_MENU) {
+ item_add_str(" --->");
+ return;
+ }
+ }
+
+conf_childs:
+ indent += doint;
+ for (child = menu->list; child; child = child->next)
+ build_conf(child);
+ indent -= doint;
+}
+
+static void reset_menu(void)
+{
+ unpost_menu(curses_menu);
+ clean_items();
+}
+
+/* adjust the menu to show this item.
+ * prefer not to scroll the menu if possible*/
+static void center_item(int selected_index, int *last_top_row)
+{
+ int toprow;
+ int maxy, maxx;
+
+ scale_menu(curses_menu, &maxy, &maxx);
+ set_top_row(curses_menu, *last_top_row);
+ toprow = top_row(curses_menu);
+ if (selected_index >= toprow && selected_index < toprow+maxy) {
+ /* we can only move the selected item. no need to scroll */
+ set_current_item(curses_menu,
+ curses_menu_items[selected_index]);
+ } else {
+ toprow = max(selected_index-maxy/2, 0);
+ if (toprow >= item_count(curses_menu)-maxy)
+ toprow = item_count(curses_menu)-mwin_max_lines;
+ set_top_row(curses_menu, toprow);
+ set_current_item(curses_menu,
+ curses_menu_items[selected_index]);
+ }
+ *last_top_row = toprow;
+ post_menu(curses_menu);
+ refresh_all_windows(main_window);
+}
+
+/* this function assumes reset_menu has been called before */
+static void show_menu(const char *prompt, const char *instructions,
+ int selected_index, int *last_top_row)
+{
+ int maxx, maxy;
+ WINDOW *menu_window;
+
+ current_instructions = instructions;
+
+ clear();
+ wattrset(main_window, attributes[NORMAL]);
+ print_in_middle(stdscr, 1, 0, COLS,
+ menu_backtitle,
+ attributes[MAIN_HEADING]);
+
+ wattrset(main_window, attributes[MAIN_MENU_BOX]);
+ box(main_window, 0, 0);
+ wattrset(main_window, attributes[MAIN_MENU_HEADING]);
+ mvwprintw(main_window, 0, 3, " %s ", prompt);
+ wattrset(main_window, attributes[NORMAL]);
+
+ set_menu_items(curses_menu, curses_menu_items);
+
+ /* position the menu at the middle of the screen */
+ scale_menu(curses_menu, &maxy, &maxx);
+ maxx = min(maxx, mwin_max_cols-2);
+ maxy = mwin_max_lines-2;
+ menu_window = derwin(main_window,
+ maxy,
+ maxx,
+ 2,
+ (mwin_max_cols-maxx)/2);
+ keypad(menu_window, TRUE);
+ set_menu_win(curses_menu, menu_window);
+ set_menu_sub(curses_menu, menu_window);
+
+ /* must reassert this after changing items, otherwise returns to a
+ * default of 16
+ */
+ set_menu_format(curses_menu, maxy, 1);
+ center_item(selected_index, last_top_row);
+ set_menu_format(curses_menu, maxy, 1);
+
+ print_function_line();
+
+ /* Post the menu */
+ post_menu(curses_menu);
+ refresh_all_windows(main_window);
+}
+
+
+static void conf(struct menu *menu)
+{
+ char pattern[256];
+ struct menu *submenu = 0;
+ const char *prompt = menu_get_prompt(menu);
+ struct symbol *sym;
+ struct menu *active_menu = NULL;
+ int res;
+ int current_index = 0;
+ int last_top_row = 0;
+
+ bzero(pattern, sizeof(pattern));
+
+ while (!global_exit) {
+ reset_menu();
+ current_menu = menu;
+ build_conf(menu);
+ if (!child_count)
+ break;
+
+ show_menu(prompt ? _(prompt) : _("Main Menu"),
+ _(menu_instructions),
+ current_index, &last_top_row);
+ keypad((menu_win(curses_menu)), TRUE);
+ while (!global_exit && (res = wgetch(menu_win(curses_menu)))) {
+ if (process_special_keys(&res,
+ (struct menu *) item_data()))
+ break;
+ switch (res) {
+ case KEY_DOWN:
+ menu_driver(curses_menu, REQ_DOWN_ITEM);
+ break;
+ case KEY_UP:
+ menu_driver(curses_menu, REQ_UP_ITEM);
+ break;
+ case KEY_NPAGE:
+ menu_driver(curses_menu, REQ_SCR_DPAGE);
+ break;
+ case KEY_PPAGE:
+ menu_driver(curses_menu, REQ_SCR_UPAGE);
+ break;
+ case KEY_HOME:
+ menu_driver(curses_menu, REQ_FIRST_ITEM);
+ break;
+ case KEY_END:
+ menu_driver(curses_menu, REQ_LAST_ITEM);
+ break;
+ case 'h':
+ case '?':
+ show_help((struct menu *) item_data());
+ break;
+ }
+ if (res == 10 || res == 27 ||
+ res == 32 || res == 'n' || res == 'y' ||
+ res == KEY_LEFT || res == KEY_RIGHT ||
+ res == 'm' || res == '/')
+ break;
+ else if (canbhot(res)) {
+ /* check for hot keys: */
+ int tmp = get_next_hot(res);
+ if (tmp != -1)
+ center_item(tmp, &last_top_row);
+ }
+ refresh_all_windows(main_window);
+ }
+
+ refresh_all_windows(main_window);
+ /* if ESC or left*/
+ if (res == 27 || (menu != &rootmenu && res == KEY_LEFT))
+ break;
+
+ /* remember location in the menu */
+ last_top_row = top_row(curses_menu);
+ current_index = curses_item_index();
+
+ if (!item_tag())
+ continue;
+
+ submenu = (struct menu *) item_data();
+ active_menu = (struct menu *)item_data();
+ if (!submenu || !menu_is_visible(submenu))
+ continue;
+ if (submenu)
+ sym = submenu->sym;
+ else
+ sym = NULL;
+
+ switch (res) {
+ case ' ':
+ if (item_is_tag('t'))
+ sym_toggle_tristate_value(sym);
+ else if (item_is_tag('m'))
+ conf(submenu);
+ break;
+ case KEY_RIGHT:
+ case 10: /* ENTER WAS PRESSED */
+ switch (item_tag()) {
+ case 'm':
+ if (single_menu_mode)
+ submenu->data =
+ (void *) (long) !submenu->data;
+ else
+ conf(submenu);
+ break;
+ case 't':
+ if (sym_is_choice(sym) &&
+ sym_get_tristate_value(sym) == yes)
+ conf_choice(submenu);
+ else if (submenu->prompt &&
+ submenu->prompt->type == P_MENU)
+ conf(submenu);
+ else if (res == 10)
+ sym_toggle_tristate_value(sym);
+ break;
+ case 's':
+ conf_string(submenu);
+ break;
+ }
+ break;
+ case 'y':
+ if (item_is_tag('t')) {
+ if (sym_set_tristate_value(sym, yes))
+ break;
+ if (sym_set_tristate_value(sym, mod))
+ btn_dialog(main_window, setmod_text, 0);
+ }
+ break;
+ case 'n':
+ if (item_is_tag('t'))
+ sym_set_tristate_value(sym, no);
+ break;
+ case 'm':
+ if (item_is_tag('t'))
+ sym_set_tristate_value(sym, mod);
+ break;
+ case '/':
+ search_conf();
+ break;
+ }
+ }
+}
+
+static void show_help(struct menu *menu)
+{
+ struct gstr help = str_new();
+
+ if (menu && menu->sym && menu_has_help(menu)) {
+ if (menu->sym->name) {
+ str_printf(&help, "CONFIG_%s:\n\n", menu->sym->name);
+ str_append(&help, _(menu_get_help(menu)));
+ str_append(&help, "\n");
+ get_symbol_str(&help, menu->sym);
+ }
+ } else {
+ str_append(&help, nohelp_text);
+ }
+ show_scroll_win(main_window, _(menu_get_prompt(menu)), str_get(&help));
+ str_free(&help);
+}
+
+static void conf_choice(struct menu *menu)
+{
+ const char *prompt = _(menu_get_prompt(menu));
+ struct menu *child = 0;
+ struct symbol *active;
+ int selected_index = 0;
+ int last_top_row = 0;
+ int res, i = 0;
+
+ active = sym_get_choice_value(menu->sym);
+ /* this is mostly duplicated from the conf() function. */
+ while (!global_exit) {
+ reset_menu();
+
+ for (i = 0, child = menu->list; child; child = child->next) {
+ if (!show_all_items && !menu_is_visible(child))
+ continue;
+
+ if (child->sym == sym_get_choice_value(menu->sym))
+ item_make(child, ':', "<X> %s",
+ _(menu_get_prompt(child)));
+ else
+ item_make(child, ':', " %s",
+ _(menu_get_prompt(child)));
+ if (child->sym == active){
+ last_top_row = top_row(curses_menu);
+ selected_index = i;
+ }
+ i++;
+ }
+ show_menu(prompt ? _(prompt) : _("Choice Menu"),
+ _(radiolist_instructions),
+ selected_index,
+ &last_top_row);
+ while (!global_exit && (res = wgetch(menu_win(curses_menu)))) {
+ if (process_special_keys(
+ &res,
+ (struct menu *) item_data()))
+ break;
+ switch (res) {
+ case KEY_DOWN:
+ menu_driver(curses_menu, REQ_DOWN_ITEM);
+ break;
+ case KEY_UP:
+ menu_driver(curses_menu, REQ_UP_ITEM);
+ break;
+ case KEY_NPAGE:
+ menu_driver(curses_menu, REQ_SCR_DPAGE);
+ break;
+ case KEY_PPAGE:
+ menu_driver(curses_menu, REQ_SCR_UPAGE);
+ break;
+ case KEY_HOME:
+ menu_driver(curses_menu, REQ_FIRST_ITEM);
+ break;
+ case KEY_END:
+ menu_driver(curses_menu, REQ_LAST_ITEM);
+ break;
+ case 'h':
+ case '?':
+ show_help((struct menu *) item_data());
+ break;
+ }
+ if (res == 10 || res == 27 || res == ' ' ||
+ res == KEY_LEFT)
+ break;
+ else if (canbhot(res)) {
+ /* check for hot keys: */
+ int tmp = get_next_hot(res);
+ if (tmp != -1)
+ center_item(tmp, &last_top_row);
+ }
+ refresh_all_windows(main_window);
+ }
+ /* if ESC or left */
+ if (res == 27 || res == KEY_LEFT)
+ break;
+
+ child = item_data();
+ if (!child || !menu_is_visible(child))
+ continue;
+ switch (res) {
+ case ' ':
+ case 10:
+ case KEY_RIGHT:
+ sym_set_tristate_value(child->sym, yes);
+ return;
+ case 'h':
+ case '?':
+ show_help(child);
+ active = child->sym;
+ break;
+ case KEY_EXIT:
+ return;
+ }
+ }
+}
+
+static void conf_string(struct menu *menu)
+{
+ const char *prompt = menu_get_prompt(menu);
+ char dialog_input_result[256];
+
+ while (1) {
+ int res;
+ const char *heading;
+
+ switch (sym_get_type(menu->sym)) {
+ case S_INT:
+ heading = _(inputbox_instructions_int);
+ break;
+ case S_HEX:
+ heading = _(inputbox_instructions_hex);
+ break;
+ case S_STRING:
+ heading = _(inputbox_instructions_string);
+ break;
+ default:
+ heading = _("Internal nconf error!");
+ }
+ res = dialog_inputbox(main_window,
+ prompt ? _(prompt) : _("Main Menu"),
+ heading,
+ sym_get_string_value(menu->sym),
+ dialog_input_result,
+ sizeof(dialog_input_result));
+ switch (res) {
+ case 0:
+ if (sym_set_string_value(menu->sym,
+ dialog_input_result))
+ return;
+ btn_dialog(main_window,
+ _("You have made an invalid entry."), 0);
+ break;
+ case 1:
+ show_help(menu);
+ break;
+ case KEY_EXIT:
+ return;
+ }
+ }
+}
+
+static void conf_load(void)
+{
+ char dialog_input_result[256];
+ while (1) {
+ int res;
+ res = dialog_inputbox(main_window,
+ NULL, load_config_text,
+ filename,
+ dialog_input_result,
+ sizeof(dialog_input_result));
+ switch (res) {
+ case 0:
+ if (!dialog_input_result[0])
+ return;
+ if (!conf_read(dialog_input_result)) {
+ set_config_filename(dialog_input_result);
+ sym_set_change_count(1);
+ return;
+ }
+ btn_dialog(main_window, _("File does not exist!"), 0);
+ break;
+ case 1:
+ show_scroll_win(main_window,
+ _("Load Alternate Configuration"),
+ load_config_help);
+ break;
+ case KEY_EXIT:
+ return;
+ }
+ }
+}
+
+static void conf_save(void)
+{
+ char dialog_input_result[256];
+ while (1) {
+ int res;
+ res = dialog_inputbox(main_window,
+ NULL, save_config_text,
+ filename,
+ dialog_input_result,
+ sizeof(dialog_input_result));
+ switch (res) {
+ case 0:
+ if (!dialog_input_result[0])
+ return;
+ supress_stdout(0);
+ res = conf_write(dialog_input_result);
+ supress_stdout(1);
+ if (!res) {
+ char buf[1024];
+ sprintf(buf, "%s %s",
+ _("configuration file saved to: "),
+ dialog_input_result);
+ btn_dialog(main_window,
+ buf, 1, "<OK>");
+ set_config_filename(dialog_input_result);
+ return;
+ }
+ btn_dialog(main_window, _("Can't create file! "
+ "Probably a nonexistent directory."),
+ 1, "<OK>");
+ break;
+ case 1:
+ show_scroll_win(main_window,
+ _("Save Alternate Configuration"),
+ save_config_help);
+ break;
+ case KEY_EXIT:
+ return;
+ }
+ }
+}
+
+void setup_windows(void)
+{
+ if (main_window != NULL)
+ delwin(main_window);
+
+ /* set up the menu and menu window */
+ main_window = newwin(LINES-2, COLS-2, 2, 1);
+ keypad(main_window, TRUE);
+ mwin_max_lines = LINES-6;
+ mwin_max_cols = COLS-6;
+
+ /* panels order is from bottom to top */
+ new_panel(main_window);
+}
+
+int main(int ac, char **av)
+{
+ char *mode;
+
+ setlocale(LC_ALL, "");
+ bindtextdomain(PACKAGE, LOCALEDIR);
+ textdomain(PACKAGE);
+
+ conf_parse(av[1]);
+ conf_read(NULL);
+
+ mode = getenv("NCONFIG_MODE");
+ if (mode) {
+ if (!strcasecmp(mode, "single_menu"))
+ single_menu_mode = 1;
+ }
+
+ /* Initialize curses */
+ initscr();
+ /* set color theme */
+ set_colors();
+
+ cbreak();
+ noecho();
+ keypad(stdscr, TRUE);
+ curs_set(0);
+
+ if (COLS < 75 || LINES < 20) {
+ endwin();
+ printf("Your terminal should have at "
+ "least 20 lines and 75 columns\n");
+ return 1;
+ }
+
+ notimeout(stdscr, FALSE);
+ ESCDELAY = 1;
+
+ /* set btns menu */
+ curses_menu = new_menu(curses_menu_items);
+ menu_opts_off(curses_menu, O_SHOWDESC);
+ menu_opts_off(curses_menu, O_SHOWMATCH);
+ menu_opts_on(curses_menu, O_ONEVALUE);
+ menu_opts_on(curses_menu, O_NONCYCLIC);
+ set_menu_mark(curses_menu, " ");
+ set_menu_fore(curses_menu, attributes[MAIN_MENU_FORE]);
+ set_menu_back(curses_menu, attributes[MAIN_MENU_BACK]);
+ set_menu_grey(curses_menu, attributes[MAIN_MENU_GREY]);
+
+ set_config_filename(conf_get_configname());
+ setup_windows();
+
+ /* check for KEY_FUNC(1) */
+ if (has_key(KEY_F(1)) == FALSE) {
+ show_scroll_win(main_window,
+ _("Instructions"),
+ _(menu_no_f_instructions));
+ }
+
+
+
+ /* do the work */
+ while (!global_exit) {
+ conf(&rootmenu);
+ if (!global_exit && do_exit() == 0)
+ break;
+ }
+ /* ok, we are done */
+ unpost_menu(curses_menu);
+ free_menu(curses_menu);
+ delwin(main_window);
+ clear();
+ refresh();
+ endwin();
+ return 0;
+}
+
diff --git a/scripts/kconfig/nconf.gui.c b/scripts/kconfig/nconf.gui.c
new file mode 100644
index 0000000..115edb4
--- /dev/null
+++ b/scripts/kconfig/nconf.gui.c
@@ -0,0 +1,617 @@
+/*
+ * Copyright (C) 2008 Nir Tzachar <nir.tzachar@gmail.com?
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ * Derived from menuconfig.
+ *
+ */
+#include "nconf.h"
+
+/* a list of all the different widgets we use */
+attributes_t attributes[ATTR_MAX+1] = {0};
+
+/* available colors:
+ COLOR_BLACK 0
+ COLOR_RED 1
+ COLOR_GREEN 2
+ COLOR_YELLOW 3
+ COLOR_BLUE 4
+ COLOR_MAGENTA 5
+ COLOR_CYAN 6
+ COLOR_WHITE 7
+ */
+static void set_normal_colors(void)
+{
+ init_pair(NORMAL, -1, -1);
+ init_pair(MAIN_HEADING, COLOR_MAGENTA, -1);
+
+ /* FORE is for the selected item */
+ init_pair(MAIN_MENU_FORE, -1, -1);
+ /* BACK for all the rest */
+ init_pair(MAIN_MENU_BACK, -1, -1);
+ init_pair(MAIN_MENU_GREY, -1, -1);
+ init_pair(MAIN_MENU_HEADING, COLOR_GREEN, -1);
+ init_pair(MAIN_MENU_BOX, COLOR_YELLOW, -1);
+
+ init_pair(SCROLLWIN_TEXT, -1, -1);
+ init_pair(SCROLLWIN_HEADING, COLOR_GREEN, -1);
+ init_pair(SCROLLWIN_BOX, COLOR_YELLOW, -1);
+
+ init_pair(DIALOG_TEXT, -1, -1);
+ init_pair(DIALOG_BOX, COLOR_YELLOW, -1);
+ init_pair(DIALOG_MENU_BACK, COLOR_YELLOW, -1);
+ init_pair(DIALOG_MENU_FORE, COLOR_RED, -1);
+
+ init_pair(INPUT_BOX, COLOR_YELLOW, -1);
+ init_pair(INPUT_HEADING, COLOR_GREEN, -1);
+ init_pair(INPUT_TEXT, -1, -1);
+ init_pair(INPUT_FIELD, -1, -1);
+
+ init_pair(FUNCTION_HIGHLIGHT, -1, -1);
+ init_pair(FUNCTION_TEXT, COLOR_BLUE, -1);
+}
+
+/* available attributes:
+ A_NORMAL Normal display (no highlight)
+ A_STANDOUT Best highlighting mode of the terminal.
+ A_UNDERLINE Underlining
+ A_REVERSE Reverse video
+ A_BLINK Blinking
+ A_DIM Half bright
+ A_BOLD Extra bright or bold
+ A_PROTECT Protected mode
+ A_INVIS Invisible or blank mode
+ A_ALTCHARSET Alternate character set
+ A_CHARTEXT Bit-mask to extract a character
+ COLOR_PAIR(n) Color-pair number n
+ */
+static void normal_color_theme(void)
+{
+ /* automatically add color... */
+#define mkattr(name, attr) do { \
+attributes[name] = attr | COLOR_PAIR(name); } while (0)
+ mkattr(NORMAL, NORMAL);
+ mkattr(MAIN_HEADING, A_BOLD | A_UNDERLINE);
+
+ mkattr(MAIN_MENU_FORE, A_REVERSE);
+ mkattr(MAIN_MENU_BACK, A_NORMAL);
+ mkattr(MAIN_MENU_GREY, A_NORMAL);
+ mkattr(MAIN_MENU_HEADING, A_BOLD);
+ mkattr(MAIN_MENU_BOX, A_NORMAL);
+
+ mkattr(SCROLLWIN_TEXT, A_NORMAL);
+ mkattr(SCROLLWIN_HEADING, A_BOLD);
+ mkattr(SCROLLWIN_BOX, A_BOLD);
+
+ mkattr(DIALOG_TEXT, A_BOLD);
+ mkattr(DIALOG_BOX, A_BOLD);
+ mkattr(DIALOG_MENU_FORE, A_STANDOUT);
+ mkattr(DIALOG_MENU_BACK, A_NORMAL);
+
+ mkattr(INPUT_BOX, A_NORMAL);
+ mkattr(INPUT_HEADING, A_BOLD);
+ mkattr(INPUT_TEXT, A_NORMAL);
+ mkattr(INPUT_FIELD, A_UNDERLINE);
+
+ mkattr(FUNCTION_HIGHLIGHT, A_BOLD);
+ mkattr(FUNCTION_TEXT, A_REVERSE);
+}
+
+static void no_colors_theme(void)
+{
+ /* automatically add highlight, no color */
+#define mkattrn(name, attr) { attributes[name] = attr; }
+
+ mkattrn(NORMAL, NORMAL);
+ mkattrn(MAIN_HEADING, A_BOLD | A_UNDERLINE);
+
+ mkattrn(MAIN_MENU_FORE, A_STANDOUT);
+ mkattrn(MAIN_MENU_BACK, A_NORMAL);
+ mkattrn(MAIN_MENU_GREY, A_NORMAL);
+ mkattrn(MAIN_MENU_HEADING, A_BOLD);
+ mkattrn(MAIN_MENU_BOX, A_NORMAL);
+
+ mkattrn(SCROLLWIN_TEXT, A_NORMAL);
+ mkattrn(SCROLLWIN_HEADING, A_BOLD);
+ mkattrn(SCROLLWIN_BOX, A_BOLD);
+
+ mkattrn(DIALOG_TEXT, A_NORMAL);
+ mkattrn(DIALOG_BOX, A_BOLD);
+ mkattrn(DIALOG_MENU_FORE, A_STANDOUT);
+ mkattrn(DIALOG_MENU_BACK, A_NORMAL);
+
+ mkattrn(INPUT_BOX, A_BOLD);
+ mkattrn(INPUT_HEADING, A_BOLD);
+ mkattrn(INPUT_TEXT, A_NORMAL);
+ mkattrn(INPUT_FIELD, A_UNDERLINE);
+
+ mkattrn(FUNCTION_HIGHLIGHT, A_BOLD);
+ mkattrn(FUNCTION_TEXT, A_REVERSE);
+}
+
+void set_colors()
+{
+ start_color();
+ use_default_colors();
+ set_normal_colors();
+ if (has_colors()) {
+ normal_color_theme();
+ } else {
+ /* give deafults */
+ no_colors_theme();
+ }
+}
+
+
+/* this changes the windows attributes !!! */
+void print_in_middle(WINDOW *win,
+ int starty,
+ int startx,
+ int width,
+ const char *string,
+ chtype color)
+{ int length, x, y;
+ float temp;
+
+
+ if (win == NULL)
+ win = stdscr;
+ getyx(win, y, x);
+ if (startx != 0)
+ x = startx;
+ if (starty != 0)
+ y = starty;
+ if (width == 0)
+ width = 80;
+
+ length = strlen(string);
+ temp = (width - length) / 2;
+ x = startx + (int)temp;
+ wattrset(win, color);
+ mvwprintw(win, y, x, "%s", string);
+ refresh();
+}
+
+int get_line_no(const char *text)
+{
+ int i;
+ int total = 1;
+
+ if (!text)
+ return 0;
+
+ for (i = 0; text[i] != '\0'; i++)
+ if (text[i] == '\n')
+ total++;
+ return total;
+}
+
+const char *get_line(const char *text, int line_no)
+{
+ int i;
+ int lines = 0;
+
+ if (!text)
+ return 0;
+
+ for (i = 0; text[i] != '\0' && lines < line_no; i++)
+ if (text[i] == '\n')
+ lines++;
+ return text+i;
+}
+
+int get_line_length(const char *line)
+{
+ int res = 0;
+ while (*line != '\0' && *line != '\n') {
+ line++;
+ res++;
+ }
+ return res;
+}
+
+/* print all lines to the window. */
+void fill_window(WINDOW *win, const char *text)
+{
+ int x, y;
+ int total_lines = get_line_no(text);
+ int i;
+
+ getmaxyx(win, y, x);
+ /* do not go over end of line */
+ total_lines = min(total_lines, y);
+ for (i = 0; i < total_lines; i++) {
+ char tmp[x+10];
+ const char *line = get_line(text, i);
+ int len = get_line_length(line);
+ strncpy(tmp, line, min(len, x));
+ tmp[len] = '\0';
+ mvwprintw(win, i, 0, tmp);
+ }
+}
+
+/* get the message, and buttons.
+ * each button must be a char*
+ * return the selected button
+ *
+ * this dialog is used for 2 different things:
+ * 1) show a text box, no buttons.
+ * 2) show a dialog, with horizontal buttons
+ */
+int btn_dialog(WINDOW *main_window, const char *msg, int btn_num, ...)
+{
+ va_list ap;
+ char *btn;
+ int btns_width = 0;
+ int msg_lines = 0;
+ int msg_width = 0;
+ int total_width;
+ int win_rows = 0;
+ WINDOW *win;
+ WINDOW *msg_win;
+ WINDOW *menu_win;
+ MENU *menu;
+ ITEM *btns[btn_num+1];
+ int i, x, y;
+ int res = -1;
+
+
+ va_start(ap, btn_num);
+ for (i = 0; i < btn_num; i++) {
+ btn = va_arg(ap, char *);
+ btns[i] = new_item(btn, "");
+ btns_width += strlen(btn)+1;
+ }
+ va_end(ap);
+ btns[btn_num] = NULL;
+
+ /* find the widest line of msg: */
+ msg_lines = get_line_no(msg);
+ for (i = 0; i < msg_lines; i++) {
+ const char *line = get_line(msg, i);
+ int len = get_line_length(line);
+ if (msg_width < len)
+ msg_width = len;
+ }
+
+ total_width = max(msg_width, btns_width);
+ /* place dialog in middle of screen */
+ y = (LINES-(msg_lines+4))/2;
+ x = (COLS-(total_width+4))/2;
+
+
+ /* create the windows */
+ if (btn_num > 0)
+ win_rows = msg_lines+4;
+ else
+ win_rows = msg_lines+2;
+
+ win = newwin(win_rows, total_width+4, y, x);
+ keypad(win, TRUE);
+ menu_win = derwin(win, 1, btns_width, win_rows-2,
+ 1+(total_width+2-btns_width)/2);
+ menu = new_menu(btns);
+ msg_win = derwin(win, win_rows-2, msg_width, 1,
+ 1+(total_width+2-msg_width)/2);
+
+ set_menu_fore(menu, attributes[DIALOG_MENU_FORE]);
+ set_menu_back(menu, attributes[DIALOG_MENU_BACK]);
+
+ wattrset(win, attributes[DIALOG_BOX]);
+ box(win, 0, 0);
+
+ /* print message */
+ wattrset(msg_win, attributes[DIALOG_TEXT]);
+ fill_window(msg_win, msg);
+
+ set_menu_win(menu, win);
+ set_menu_sub(menu, menu_win);
+ set_menu_format(menu, 1, btn_num);
+ menu_opts_off(menu, O_SHOWDESC);
+ menu_opts_off(menu, O_SHOWMATCH);
+ menu_opts_on(menu, O_ONEVALUE);
+ menu_opts_on(menu, O_NONCYCLIC);
+ set_menu_mark(menu, "");
+ post_menu(menu);
+
+
+ touchwin(win);
+ refresh_all_windows(main_window);
+ while ((res = wgetch(win))) {
+ switch (res) {
+ case KEY_LEFT:
+ menu_driver(menu, REQ_LEFT_ITEM);
+ break;
+ case KEY_RIGHT:
+ menu_driver(menu, REQ_RIGHT_ITEM);
+ break;
+ case 10: /* ENTER */
+ case 27: /* ESCAPE */
+ case ' ':
+ case KEY_F(F_BACK):
+ case KEY_F(F_EXIT):
+ break;
+ }
+ touchwin(win);
+ refresh_all_windows(main_window);
+
+ if (res == 10 || res == ' ') {
+ res = item_index(current_item(menu));
+ break;
+ } else if (res == 27 || res == KEY_F(F_BACK) ||
+ res == KEY_F(F_EXIT)) {
+ res = KEY_EXIT;
+ break;
+ }
+ }
+
+ unpost_menu(menu);
+ free_menu(menu);
+ for (i = 0; i < btn_num; i++)
+ free_item(btns[i]);
+
+ delwin(win);
+ return res;
+}
+
+int dialog_inputbox(WINDOW *main_window,
+ const char *title, const char *prompt,
+ const char *init, char *result, int result_len)
+{
+ int prompt_lines = 0;
+ int prompt_width = 0;
+ WINDOW *win;
+ WINDOW *prompt_win;
+ WINDOW *form_win;
+ PANEL *panel;
+ int i, x, y;
+ int res = -1;
+ int cursor_position = strlen(init);
+
+
+ /* find the widest line of msg: */
+ prompt_lines = get_line_no(prompt);
+ for (i = 0; i < prompt_lines; i++) {
+ const char *line = get_line(prompt, i);
+ int len = get_line_length(line);
+ prompt_width = max(prompt_width, len);
+ }
+
+ if (title)
+ prompt_width = max(prompt_width, strlen(title));
+
+ /* place dialog in middle of screen */
+ y = (LINES-(prompt_lines+4))/2;
+ x = (COLS-(prompt_width+4))/2;
+
+ strncpy(result, init, result_len);
+
+ /* create the windows */
+ win = newwin(prompt_lines+6, prompt_width+7, y, x);
+ prompt_win = derwin(win, prompt_lines+1, prompt_width, 2, 2);
+ form_win = derwin(win, 1, prompt_width, prompt_lines+3, 2);
+ keypad(form_win, TRUE);
+
+ wattrset(form_win, attributes[INPUT_FIELD]);
+
+ wattrset(win, attributes[INPUT_BOX]);
+ box(win, 0, 0);
+ wattrset(win, attributes[INPUT_HEADING]);
+ if (title)
+ mvwprintw(win, 0, 3, "%s", title);
+
+ /* print message */
+ wattrset(prompt_win, attributes[INPUT_TEXT]);
+ fill_window(prompt_win, prompt);
+
+ mvwprintw(form_win, 0, 0, "%*s", prompt_width, " ");
+ mvwprintw(form_win, 0, 0, "%s", result);
+
+ /* create panels */
+ panel = new_panel(win);
+
+ /* show the cursor */
+ curs_set(1);
+
+ touchwin(win);
+ refresh_all_windows(main_window);
+ while ((res = wgetch(form_win))) {
+ int len = strlen(result);
+ switch (res) {
+ case 10: /* ENTER */
+ case 27: /* ESCAPE */
+ case KEY_F(F_HELP):
+ case KEY_F(F_EXIT):
+ case KEY_F(F_BACK):
+ break;
+ case 127:
+ case KEY_BACKSPACE:
+ if (cursor_position > 0) {
+ memmove(&result[cursor_position-1],
+ &result[cursor_position],
+ len-cursor_position+1);
+ cursor_position--;
+ }
+ break;
+ case KEY_DC:
+ if (cursor_position >= 0 && cursor_position < len) {
+ memmove(&result[cursor_position],
+ &result[cursor_position+1],
+ len-cursor_position+1);
+ }
+ break;
+ case KEY_UP:
+ case KEY_RIGHT:
+ if (cursor_position < len &&
+ cursor_position < min(result_len, prompt_width))
+ cursor_position++;
+ break;
+ case KEY_DOWN:
+ case KEY_LEFT:
+ if (cursor_position > 0)
+ cursor_position--;
+ break;
+ default:
+ if ((isgraph(res) || isspace(res)) &&
+ len-2 < result_len) {
+ /* insert the char at the proper position */
+ memmove(&result[cursor_position+1],
+ &result[cursor_position],
+ len+1);
+ result[cursor_position] = res;
+ cursor_position++;
+ } else {
+ mvprintw(0, 0, "unknow key: %d\n", res);
+ }
+ break;
+ }
+ wmove(form_win, 0, 0);
+ wclrtoeol(form_win);
+ mvwprintw(form_win, 0, 0, "%*s", prompt_width, " ");
+ mvwprintw(form_win, 0, 0, "%s", result);
+ wmove(form_win, 0, cursor_position);
+ touchwin(win);
+ refresh_all_windows(main_window);
+
+ if (res == 10) {
+ res = 0;
+ break;
+ } else if (res == 27 || res == KEY_F(F_BACK) ||
+ res == KEY_F(F_EXIT)) {
+ res = KEY_EXIT;
+ break;
+ } else if (res == KEY_F(F_HELP)) {
+ res = 1;
+ break;
+ }
+ }
+
+ /* hide the cursor */
+ curs_set(0);
+ del_panel(panel);
+ delwin(prompt_win);
+ delwin(form_win);
+ delwin(win);
+ return res;
+}
+
+/* refresh all windows in the correct order */
+void refresh_all_windows(WINDOW *main_window)
+{
+ update_panels();
+ touchwin(main_window);
+ refresh();
+}
+
+/* layman's scrollable window... */
+void show_scroll_win(WINDOW *main_window,
+ const char *title,
+ const char *text)
+{
+ int res;
+ int total_lines = get_line_no(text);
+ int x, y;
+ int start_x = 0, start_y = 0;
+ int text_lines = 0, text_cols = 0;
+ int total_cols = 0;
+ int win_cols = 0;
+ int win_lines = 0;
+ int i = 0;
+ WINDOW *win;
+ WINDOW *pad;
+ PANEL *panel;
+
+ /* find the widest line of msg: */
+ total_lines = get_line_no(text);
+ for (i = 0; i < total_lines; i++) {
+ const char *line = get_line(text, i);
+ int len = get_line_length(line);
+ total_cols = max(total_cols, len+2);
+ }
+
+ /* create the pad */
+ pad = newpad(total_lines+10, total_cols+10);
+ wattrset(pad, attributes[SCROLLWIN_TEXT]);
+ fill_window(pad, text);
+
+ win_lines = min(total_lines+4, LINES-2);
+ win_cols = min(total_cols+2, COLS-2);
+ text_lines = max(win_lines-4, 0);
+ text_cols = max(win_cols-2, 0);
+
+ /* place window in middle of screen */
+ y = (LINES-win_lines)/2;
+ x = (COLS-win_cols)/2;
+
+ win = newwin(win_lines, win_cols, y, x);
+ keypad(win, TRUE);
+ /* show the help in the help window, and show the help panel */
+ wattrset(win, attributes[SCROLLWIN_BOX]);
+ box(win, 0, 0);
+ wattrset(win, attributes[SCROLLWIN_HEADING]);
+ mvwprintw(win, 0, 3, " %s ", title);
+ panel = new_panel(win);
+
+ /* handle scrolling */
+ do {
+
+ copywin(pad, win, start_y, start_x, 2, 2, text_lines,
+ text_cols, 0);
+ print_in_middle(win,
+ text_lines+2,
+ 0,
+ text_cols,
+ "<OK>",
+ attributes[DIALOG_MENU_FORE]);
+ wrefresh(win);
+
+ res = wgetch(win);
+ switch (res) {
+ case KEY_NPAGE:
+ case ' ':
+ start_y += text_lines-2;
+ break;
+ case KEY_PPAGE:
+ start_y -= text_lines+2;
+ break;
+ case KEY_HOME:
+ start_y = 0;
+ break;
+ case KEY_END:
+ start_y = total_lines-text_lines;
+ break;
+ case KEY_DOWN:
+ case 'j':
+ start_y++;
+ break;
+ case KEY_UP:
+ case 'k':
+ start_y--;
+ break;
+ case KEY_LEFT:
+ case 'h':
+ start_x--;
+ break;
+ case KEY_RIGHT:
+ case 'l':
+ start_x++;
+ break;
+ }
+ if (res == 10 || res == 27 || res == 'q'
+ || res == KEY_F(F_BACK) || res == KEY_F(F_EXIT)) {
+ break;
+ }
+ if (start_y < 0)
+ start_y = 0;
+ if (start_y >= total_lines-text_lines)
+ start_y = total_lines-text_lines;
+ if (start_x < 0)
+ start_x = 0;
+ if (start_x >= total_cols-text_cols)
+ start_x = total_cols-text_cols;
+ } while (res);
+
+ del_panel(panel);
+ delwin(win);
+ refresh_all_windows(main_window);
+}
diff --git a/scripts/kconfig/nconf.h b/scripts/kconfig/nconf.h
new file mode 100644
index 0000000..fb42966
--- /dev/null
+++ b/scripts/kconfig/nconf.h
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2008 Nir Tzachar <nir.tzachar@gmail.com?
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ * Derived from menuconfig.
+ *
+ */
+
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <locale.h>
+#include <curses.h>
+#include <menu.h>
+#include <panel.h>
+#include <form.h>
+
+#include <stdio.h>
+#include <time.h>
+#include <sys/time.h>
+
+#include "ncurses.h"
+
+#define max(a, b) ({\
+ typeof(a) _a = a;\
+ typeof(b) _b = b;\
+ _a > _b ? _a : _b; })
+
+#define min(a, b) ({\
+ typeof(a) _a = a;\
+ typeof(b) _b = b;\
+ _a < _b ? _a : _b; })
+
+typedef enum {
+ NORMAL = 1,
+ MAIN_HEADING,
+ MAIN_MENU_BOX,
+ MAIN_MENU_FORE,
+ MAIN_MENU_BACK,
+ MAIN_MENU_GREY,
+ MAIN_MENU_HEADING,
+ SCROLLWIN_TEXT,
+ SCROLLWIN_HEADING,
+ SCROLLWIN_BOX,
+ DIALOG_TEXT,
+ DIALOG_MENU_FORE,
+ DIALOG_MENU_BACK,
+ DIALOG_BOX,
+ INPUT_BOX,
+ INPUT_HEADING,
+ INPUT_TEXT,
+ INPUT_FIELD,
+ FUNCTION_TEXT,
+ FUNCTION_HIGHLIGHT,
+ ATTR_MAX
+} attributes_t;
+extern attributes_t attributes[];
+
+typedef enum {
+ F_HELP = 1,
+ F_SYMBOL = 2,
+ F_INSTS = 3,
+ F_CONF = 4,
+ F_BACK = 5,
+ F_SAVE = 6,
+ F_LOAD = 7,
+ F_EXIT = 8
+} function_key;
+
+void set_colors(void);
+
+/* this changes the windows attributes !!! */
+void print_in_middle(WINDOW *win,
+ int starty,
+ int startx,
+ int width,
+ const char *string,
+ chtype color);
+int get_line_length(const char *line);
+int get_line_no(const char *text);
+const char *get_line(const char *text, int line_no);
+void fill_window(WINDOW *win, const char *text);
+int btn_dialog(WINDOW *main_window, const char *msg, int btn_num, ...);
+int dialog_inputbox(WINDOW *main_window,
+ const char *title, const char *prompt,
+ const char *init, char *result, int result_len);
+void refresh_all_windows(WINDOW *main_window);
+void show_scroll_win(WINDOW *main_window,
+ const char *title,
+ const char *text);
diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl
index afbd54a..c70a27d 100644
--- a/scripts/kconfig/streamline_config.pl
+++ b/scripts/kconfig/streamline_config.pl
@@ -115,7 +115,9 @@
my $kconfig = $ARGV[1];
my $lsmod_file = $ARGV[2];
-my @makefiles = `find $ksource -name Makefile`;
+my @makefiles = `find $ksource -name Makefile 2>/dev/null`;
+chomp @makefiles;
+
my %depends;
my %selects;
my %prompts;
@@ -215,7 +217,6 @@
# Read all Makefiles to map the configs to the objects
foreach my $makefile (@makefiles) {
- chomp $makefile;
open(MIN,$makefile) || die "Can't open $makefile";
while (<MIN>) {
@@ -242,7 +243,7 @@
foreach my $obj (split /\s+/,$objs) {
$obj =~ s/-/_/g;
if ($obj =~ /(.*)\.o$/) {
- # Objects may bes enabled by more than one config.
+ # Objects may be enabled by more than one config.
# Store configs in an array.
my @arr;
@@ -307,7 +308,7 @@
my %configs;
foreach my $module (keys(%modules)) {
if (defined($objects{$module})) {
- @arr = @{$objects{$module}};
+ my @arr = @{$objects{$module}};
foreach my $conf (@arr) {
$configs{$conf} = $module;
}
diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c
index 6c8fbbb..2e7a048 100644
--- a/scripts/kconfig/symbol.c
+++ b/scripts/kconfig/symbol.c
@@ -651,12 +651,20 @@
return sym->visible > sym->rev_dep.tri;
}
+static unsigned strhash(const char *s)
+{
+ /* fnv32 hash */
+ unsigned hash = 2166136261U;
+ for (; *s; s++)
+ hash = (hash ^ *s) * 0x01000193;
+ return hash;
+}
+
struct symbol *sym_lookup(const char *name, int flags)
{
struct symbol *symbol;
- const char *ptr;
char *new_name;
- int hash = 0;
+ int hash;
if (name) {
if (name[0] && !name[1]) {
@@ -666,12 +674,11 @@
case 'n': return &symbol_no;
}
}
- for (ptr = name; *ptr; ptr++)
- hash += *ptr;
- hash &= 0xff;
+ hash = strhash(name) % SYMBOL_HASHSIZE;
for (symbol = symbol_hash[hash]; symbol; symbol = symbol->next) {
- if (!strcmp(symbol->name, name) &&
+ if (symbol->name &&
+ !strcmp(symbol->name, name) &&
(flags ? symbol->flags & flags
: !(symbol->flags & (SYMBOL_CONST|SYMBOL_CHOICE))))
return symbol;
@@ -679,7 +686,7 @@
new_name = strdup(name);
} else {
new_name = NULL;
- hash = 256;
+ hash = 0;
}
symbol = malloc(sizeof(*symbol));
@@ -697,7 +704,6 @@
struct symbol *sym_find(const char *name)
{
struct symbol *symbol = NULL;
- const char *ptr;
int hash = 0;
if (!name)
@@ -710,12 +716,11 @@
case 'n': return &symbol_no;
}
}
- for (ptr = name; *ptr; ptr++)
- hash += *ptr;
- hash &= 0xff;
+ hash = strhash(name) % SYMBOL_HASHSIZE;
for (symbol = symbol_hash[hash]; symbol; symbol = symbol->next) {
- if (!strcmp(symbol->name, name) &&
+ if (symbol->name &&
+ !strcmp(symbol->name, name) &&
!(symbol->flags & SYMBOL_CONST))
break;
}
@@ -750,6 +755,7 @@
return NULL;
}
}
+ sym_calc_value(sym);
sym_arr[cnt++] = sym;
}
if (sym_arr)
diff --git a/scripts/kconfig/util.c b/scripts/kconfig/util.c
index 25d1ec4..78b5c04 100644
--- a/scripts/kconfig/util.c
+++ b/scripts/kconfig/util.c
@@ -78,6 +78,7 @@
struct gstr gs;
gs.s = malloc(sizeof(char) * 64);
gs.len = 64;
+ gs.max_width = 0;
strcpy(gs.s, "\0");
return gs;
}
@@ -88,6 +89,7 @@
struct gstr gs;
gs.s = strdup(s);
gs.len = strlen(s) + 1;
+ gs.max_width = 0;
return gs;
}
diff --git a/scripts/kconfig/zconf.tab.c_shipped b/scripts/kconfig/zconf.tab.c_shipped
index 6e9dcd5..32a9eef 100644
--- a/scripts/kconfig/zconf.tab.c_shipped
+++ b/scripts/kconfig/zconf.tab.c_shipped
@@ -104,7 +104,7 @@
static void zconferror(const char *err);
static bool zconf_endtoken(struct kconf_id *id, int starttoken, int endtoken);
-struct symbol *symbol_hash[257];
+struct symbol *symbol_hash[SYMBOL_HASHSIZE];
static struct menu *current_menu, *current_entry;
@@ -2220,7 +2220,7 @@
zconf_initscan(name);
sym_init();
- menu_init();
+ _menu_init();
modules_sym = sym_lookup(NULL, 0);
modules_sym->type = S_BOOLEAN;
modules_sym->flags |= SYMBOL_AUTO;
@@ -2336,9 +2336,9 @@
struct property *prop;
if (sym_is_choice(sym))
- fprintf(out, "choice\n");
+ fprintf(out, "\nchoice\n");
else
- fprintf(out, "config %s\n", sym->name);
+ fprintf(out, "\nconfig %s\n", sym->name);
switch (sym->type) {
case S_BOOLEAN:
fputs(" boolean\n", out);
@@ -2384,6 +2384,21 @@
case P_CHOICE:
fputs(" #choice value\n", out);
break;
+ case P_SELECT:
+ fputs( " select ", out);
+ expr_fprint(prop->expr, out);
+ fputc('\n', out);
+ break;
+ case P_RANGE:
+ fputs( " range ", out);
+ expr_fprint(prop->expr, out);
+ fputc('\n', out);
+ break;
+ case P_MENU:
+ fputs( " menu ", out);
+ print_quoted_string(out, prop->text);
+ fputc('\n', out);
+ break;
default:
fprintf(out, " unknown prop %d!\n", prop->type);
break;
@@ -2395,7 +2410,6 @@
menu->help[len] = 0;
fprintf(out, " help\n%s\n", menu->help);
}
- fputc('\n', out);
}
void zconfdump(FILE *out)
@@ -2428,7 +2442,6 @@
expr_fprint(prop->visible.expr, out);
fputc('\n', out);
}
- fputs("\n", out);
}
if (menu->list)
diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y
index 8c43491..23dfd3b 100644
--- a/scripts/kconfig/zconf.y
+++ b/scripts/kconfig/zconf.y
@@ -27,7 +27,7 @@
static void zconferror(const char *err);
static bool zconf_endtoken(struct kconf_id *id, int starttoken, int endtoken);
-struct symbol *symbol_hash[257];
+struct symbol *symbol_hash[SYMBOL_HASHSIZE];
static struct menu *current_menu, *current_entry;
@@ -475,7 +475,7 @@
zconf_initscan(name);
sym_init();
- menu_init();
+ _menu_init();
modules_sym = sym_lookup(NULL, 0);
modules_sym->type = S_BOOLEAN;
modules_sym->flags |= SYMBOL_AUTO;
@@ -591,9 +591,9 @@
struct property *prop;
if (sym_is_choice(sym))
- fprintf(out, "choice\n");
+ fprintf(out, "\nchoice\n");
else
- fprintf(out, "config %s\n", sym->name);
+ fprintf(out, "\nconfig %s\n", sym->name);
switch (sym->type) {
case S_BOOLEAN:
fputs(" boolean\n", out);
@@ -639,6 +639,21 @@
case P_CHOICE:
fputs(" #choice value\n", out);
break;
+ case P_SELECT:
+ fputs( " select ", out);
+ expr_fprint(prop->expr, out);
+ fputc('\n', out);
+ break;
+ case P_RANGE:
+ fputs( " range ", out);
+ expr_fprint(prop->expr, out);
+ fputc('\n', out);
+ break;
+ case P_MENU:
+ fputs( " menu ", out);
+ print_quoted_string(out, prop->text);
+ fputc('\n', out);
+ break;
default:
fprintf(out, " unknown prop %d!\n", prop->type);
break;
@@ -650,7 +665,6 @@
menu->help[len] = 0;
fprintf(out, " help\n%s\n", menu->help);
}
- fputc('\n', out);
}
void zconfdump(FILE *out)
@@ -683,7 +697,6 @@
expr_fprint(prop->visible.expr, out);
fputc('\n', out);
}
- fputs("\n", out);
}
if (menu->list)
diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl
index e950f9c..827896f 100644
--- a/scripts/markup_oops.pl
+++ b/scripts/markup_oops.pl
@@ -2,6 +2,7 @@
use File::Basename;
use Math::BigInt;
+use Getopt::Long;
# Copyright 2008, Intel Corporation
#
@@ -15,6 +16,16 @@
# Arjan van de Ven <arjan@linux.intel.com>
+my $cross_compile = "";
+my $vmlinux_name = "";
+my $modulefile = "";
+
+# Get options
+Getopt::Long::GetOptions(
+ 'cross-compile|c=s' => \$cross_compile,
+ 'module|m=s' => \$modulefile,
+ 'help|h' => \&usage,
+) || usage ();
my $vmlinux_name = $ARGV[0];
if (!defined($vmlinux_name)) {
my $kerver = `uname -r`;
@@ -23,9 +34,8 @@
print "No vmlinux specified, assuming $vmlinux_name\n";
}
my $filename = $vmlinux_name;
-#
-# Step 1: Parse the oops to find the EIP value
-#
+
+# Parse the oops to find the EIP value
my $target = "0";
my $function;
@@ -177,26 +187,26 @@
my $decodestop = Math::BigInt->from_hex("0x$target") + 8192;
if ($target eq "0") {
print "No oops found!\n";
- print "Usage: \n";
- print " dmesg | perl scripts/markup_oops.pl vmlinux\n";
- exit;
+ usage();
}
# if it's a module, we need to find the .ko file and calculate a load offset
if ($module ne "") {
- my $modulefile = `modinfo $module | grep '^filename:' | awk '{ print \$2 }'`;
- chomp($modulefile);
+ if ($modulefile eq "") {
+ $modulefile = `modinfo -F filename $module`;
+ chomp($modulefile);
+ }
$filename = $modulefile;
if ($filename eq "") {
print "Module .ko file for $module not found. Aborting\n";
exit;
}
# ok so we found the module, now we need to calculate the vma offset
- open(FILE, "objdump -dS $filename |") || die "Cannot start objdump";
+ open(FILE, $cross_compile."objdump -dS $filename |") || die "Cannot start objdump";
while (<FILE>) {
if ($_ =~ /^([0-9a-f]+) \<$function\>\:/) {
my $fu = $1;
- $vmaoffset = hex($target) - hex($fu) - hex($func_offset);
+ $vmaoffset = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$fu") - Math::BigInt->from_hex("0x$func_offset");
}
}
close(FILE);
@@ -204,7 +214,7 @@
my $counter = 0;
my $state = 0;
-my $center = 0;
+my $center = -1;
my @lines;
my @reglines;
@@ -212,7 +222,7 @@
my ($address, $target) = @_;
my $ad = "0x".$address;
my $ta = "0x".$target;
- my $delta = hex($ad) - hex($ta);
+ my $delta = Math::BigInt->from_hex($ad) - Math::BigInt->from_hex($ta);
if (($delta > -4096) && ($delta < 4096)) {
return 1;
@@ -225,7 +235,7 @@
# first, parse the input into the lines array, but to keep size down,
# we only do this for 4Kb around the sweet spot
-open(FILE, "objdump -dS --adjust-vma=$vmaoffset --start-address=$decodestart --stop-address=$decodestop $filename |") || die "Cannot start objdump";
+open(FILE, $cross_compile."objdump -dS --adjust-vma=$vmaoffset --start-address=$decodestart --stop-address=$decodestop $filename |") || die "Cannot start objdump";
while (<FILE>) {
my $line = $_;
@@ -236,7 +246,8 @@
$state = 1;
}
}
- } else {
+ }
+ if ($state == 1) {
if ($line =~ /^([a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9]+)\:/) {
my $val = $1;
if (!InRange($val, $target)) {
@@ -259,7 +270,7 @@
exit;
}
-if ($center == 0) {
+if ($center == -1) {
print "No matching code found \n";
exit;
}
@@ -344,3 +355,16 @@
$i = $i +1;
}
+sub usage {
+ print <<EOT;
+Usage:
+ dmesg | perl $0 [OPTION] [VMLINUX]
+
+OPTION:
+ -c, --cross-compile CROSS_COMPILE Specify the prefix used for toolchain.
+ -m, --module MODULE_DIRNAME Specify the module filename.
+ -h, --help Help.
+EOT
+ exit;
+}
+
diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h
index 23dbad8..50ad317 100755
--- a/scripts/mkcompile_h
+++ b/scripts/mkcompile_h
@@ -67,9 +67,8 @@
echo \#define LINUX_COMPILE_BY \"`whoami`\"
echo \#define LINUX_COMPILE_HOST \"`hostname | $UTS_TRUNCATE`\"
- if [ -x /bin/dnsdomainname ]; then
- domain=`dnsdomainname 2> /dev/null`
- elif [ -x /bin/domainname ]; then
+ domain=`dnsdomainname 2> /dev/null`
+ if [ -z "$domain" ]; then
domain=`domainname 2> /dev/null`
fi
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 2092361..f6127b9 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -503,6 +503,11 @@
strncmp(symname, "_rest32gpr_", sizeof("_rest32gpr_") - 1) == 0 ||
strncmp(symname, "_save32gpr_", sizeof("_save32gpr_") - 1) == 0)
return 1;
+ if (info->hdr->e_machine == EM_PPC64)
+ /* Special register function linked on all modules during final link of .ko */
+ if (strncmp(symname, "_restgpr0_", sizeof("_restgpr0_") - 1) == 0 ||
+ strncmp(symname, "_savegpr0_", sizeof("_savegpr0_") - 1) == 0)
+ return 1;
/* Do not ignore this symbol */
return 0;
}
@@ -781,10 +786,13 @@
#define ALL_EXIT_TEXT_SECTIONS \
".exit.text$", ".devexit.text$", ".cpuexit.text$", ".memexit.text$"
-#define ALL_INIT_SECTIONS INIT_SECTIONS, DEV_INIT_SECTIONS, \
- CPU_INIT_SECTIONS, MEM_INIT_SECTIONS
-#define ALL_EXIT_SECTIONS EXIT_SECTIONS, DEV_EXIT_SECTIONS, \
- CPU_EXIT_SECTIONS, MEM_EXIT_SECTIONS
+#define ALL_XXXINIT_SECTIONS DEV_INIT_SECTIONS, CPU_INIT_SECTIONS, \
+ MEM_INIT_SECTIONS
+#define ALL_XXXEXIT_SECTIONS DEV_EXIT_SECTIONS, CPU_EXIT_SECTIONS, \
+ MEM_EXIT_SECTIONS
+
+#define ALL_INIT_SECTIONS INIT_SECTIONS, ALL_XXXINIT_SECTIONS
+#define ALL_EXIT_SECTIONS EXIT_SECTIONS, ALL_XXXEXIT_SECTIONS
#define DATA_SECTIONS ".data$", ".data.rel$"
#define TEXT_SECTIONS ".text$"
@@ -814,33 +822,29 @@
/* symbols in .data that may refer to init/exit sections */
-static const char *symbol_white_list[] =
-{
- "*driver",
- "*_template", /* scsi uses *_template a lot */
- "*_timer", /* arm uses ops structures named _timer a lot */
- "*_sht", /* scsi also used *_sht to some extent */
- "*_ops",
- "*_probe",
- "*_probe_one",
- "*_console",
- NULL
-};
+#define DEFAULT_SYMBOL_WHITE_LIST \
+ "*driver", \
+ "*_template", /* scsi uses *_template a lot */ \
+ "*_timer", /* arm uses ops structures named _timer a lot */ \
+ "*_sht", /* scsi also used *_sht to some extent */ \
+ "*_ops", \
+ "*_probe", \
+ "*_probe_one", \
+ "*_console"
static const char *head_sections[] = { ".head.text*", NULL };
static const char *linker_symbols[] =
{ "__init_begin", "_sinittext", "_einittext", NULL };
enum mismatch {
- NO_MISMATCH,
- TEXT_TO_INIT,
- DATA_TO_INIT,
- TEXT_TO_EXIT,
- DATA_TO_EXIT,
- XXXINIT_TO_INIT,
- XXXEXIT_TO_EXIT,
- INIT_TO_EXIT,
- EXIT_TO_INIT,
+ TEXT_TO_ANY_INIT,
+ DATA_TO_ANY_INIT,
+ TEXT_TO_ANY_EXIT,
+ DATA_TO_ANY_EXIT,
+ XXXINIT_TO_SOME_INIT,
+ XXXEXIT_TO_SOME_EXIT,
+ ANY_INIT_TO_ANY_EXIT,
+ ANY_EXIT_TO_ANY_INIT,
EXPORT_TO_INIT_EXIT,
};
@@ -848,6 +852,7 @@
const char *fromsec[20];
const char *tosec[20];
enum mismatch mismatch;
+ const char *symbol_white_list[20];
};
const struct sectioncheck sectioncheck[] = {
@@ -857,80 +862,103 @@
{
.fromsec = { TEXT_SECTIONS, NULL },
.tosec = { ALL_INIT_SECTIONS, NULL },
- .mismatch = TEXT_TO_INIT,
+ .mismatch = TEXT_TO_ANY_INIT,
+ .symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
},
{
.fromsec = { DATA_SECTIONS, NULL },
- .tosec = { ALL_INIT_SECTIONS, NULL },
- .mismatch = DATA_TO_INIT,
+ .tosec = { ALL_XXXINIT_SECTIONS, NULL },
+ .mismatch = DATA_TO_ANY_INIT,
+ .symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
+},
+{
+ .fromsec = { DATA_SECTIONS, NULL },
+ .tosec = { INIT_SECTIONS, NULL },
+ .mismatch = DATA_TO_ANY_INIT,
+ .symbol_white_list = {
+ "*_template", "*_timer", "*_sht", "*_ops",
+ "*_probe", "*_probe_one", "*_console", NULL
+ },
},
{
.fromsec = { TEXT_SECTIONS, NULL },
.tosec = { ALL_EXIT_SECTIONS, NULL },
- .mismatch = TEXT_TO_EXIT,
+ .mismatch = TEXT_TO_ANY_EXIT,
+ .symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
},
{
.fromsec = { DATA_SECTIONS, NULL },
.tosec = { ALL_EXIT_SECTIONS, NULL },
- .mismatch = DATA_TO_EXIT,
+ .mismatch = DATA_TO_ANY_EXIT,
+ .symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
},
/* Do not reference init code/data from devinit/cpuinit/meminit code/data */
{
- .fromsec = { DEV_INIT_SECTIONS, CPU_INIT_SECTIONS, MEM_INIT_SECTIONS, NULL },
+ .fromsec = { ALL_XXXINIT_SECTIONS, NULL },
.tosec = { INIT_SECTIONS, NULL },
- .mismatch = XXXINIT_TO_INIT,
+ .mismatch = XXXINIT_TO_SOME_INIT,
+ .symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
},
/* Do not reference cpuinit code/data from meminit code/data */
{
.fromsec = { MEM_INIT_SECTIONS, NULL },
.tosec = { CPU_INIT_SECTIONS, NULL },
- .mismatch = XXXINIT_TO_INIT,
+ .mismatch = XXXINIT_TO_SOME_INIT,
+ .symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
},
/* Do not reference meminit code/data from cpuinit code/data */
{
.fromsec = { CPU_INIT_SECTIONS, NULL },
.tosec = { MEM_INIT_SECTIONS, NULL },
- .mismatch = XXXINIT_TO_INIT,
+ .mismatch = XXXINIT_TO_SOME_INIT,
+ .symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
},
/* Do not reference exit code/data from devexit/cpuexit/memexit code/data */
{
- .fromsec = { DEV_EXIT_SECTIONS, CPU_EXIT_SECTIONS, MEM_EXIT_SECTIONS, NULL },
+ .fromsec = { ALL_XXXEXIT_SECTIONS, NULL },
.tosec = { EXIT_SECTIONS, NULL },
- .mismatch = XXXEXIT_TO_EXIT,
+ .mismatch = XXXEXIT_TO_SOME_EXIT,
+ .symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
},
/* Do not reference cpuexit code/data from memexit code/data */
{
.fromsec = { MEM_EXIT_SECTIONS, NULL },
.tosec = { CPU_EXIT_SECTIONS, NULL },
- .mismatch = XXXEXIT_TO_EXIT,
+ .mismatch = XXXEXIT_TO_SOME_EXIT,
+ .symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
},
/* Do not reference memexit code/data from cpuexit code/data */
{
.fromsec = { CPU_EXIT_SECTIONS, NULL },
.tosec = { MEM_EXIT_SECTIONS, NULL },
- .mismatch = XXXEXIT_TO_EXIT,
+ .mismatch = XXXEXIT_TO_SOME_EXIT,
+ .symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
},
/* Do not use exit code/data from init code */
{
.fromsec = { ALL_INIT_SECTIONS, NULL },
.tosec = { ALL_EXIT_SECTIONS, NULL },
- .mismatch = INIT_TO_EXIT,
+ .mismatch = ANY_INIT_TO_ANY_EXIT,
+ .symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
},
/* Do not use init code/data from exit code */
{
.fromsec = { ALL_EXIT_SECTIONS, NULL },
.tosec = { ALL_INIT_SECTIONS, NULL },
- .mismatch = EXIT_TO_INIT,
+ .mismatch = ANY_EXIT_TO_ANY_INIT,
+ .symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
},
/* Do not export init/exit functions or data */
{
.fromsec = { "__ksymtab*", NULL },
.tosec = { INIT_SECTIONS, EXIT_SECTIONS, NULL },
- .mismatch = EXPORT_TO_INIT_EXIT
+ .mismatch = EXPORT_TO_INIT_EXIT,
+ .symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL },
}
};
-static int section_mismatch(const char *fromsec, const char *tosec)
+static const struct sectioncheck *section_mismatch(
+ const char *fromsec, const char *tosec)
{
int i;
int elems = sizeof(sectioncheck) / sizeof(struct sectioncheck);
@@ -939,10 +967,10 @@
for (i = 0; i < elems; i++) {
if (match(fromsec, check->fromsec) &&
match(tosec, check->tosec))
- return check->mismatch;
+ return check;
check++;
}
- return NO_MISMATCH;
+ return NULL;
}
/**
@@ -961,7 +989,7 @@
* Pattern 2:
* Many drivers utilise a *driver container with references to
* add, remove, probe functions etc.
- * These functions may often be marked __init and we do not want to
+ * These functions may often be marked __devinit and we do not want to
* warn here.
* the pattern is identified by:
* tosec = init or exit section
@@ -982,7 +1010,8 @@
* refsymname = __init_begin, _sinittext, _einittext
*
**/
-static int secref_whitelist(const char *fromsec, const char *fromsym,
+static int secref_whitelist(const struct sectioncheck *mismatch,
+ const char *fromsec, const char *fromsym,
const char *tosec, const char *tosym)
{
/* Check for pattern 1 */
@@ -994,7 +1023,7 @@
/* Check for pattern 2 */
if (match(tosec, init_exit_sections) &&
match(fromsec, data_sections) &&
- match(fromsym, symbol_white_list))
+ match(fromsym, mismatch->symbol_white_list))
return 0;
/* Check for pattern 3 */
@@ -1155,7 +1184,8 @@
* Try to find symbols near it so user can find it.
* Check whitelist before warning - it may be a false positive.
*/
-static void report_sec_mismatch(const char *modname, enum mismatch mismatch,
+static void report_sec_mismatch(const char *modname,
+ const struct sectioncheck *mismatch,
const char *fromsec,
unsigned long long fromaddr,
const char *fromsym,
@@ -1186,8 +1216,8 @@
modname, fromsec, fromaddr, from, fromsym, from_p, to, tosec,
tosym, to_p);
- switch (mismatch) {
- case TEXT_TO_INIT:
+ switch (mismatch->mismatch) {
+ case TEXT_TO_ANY_INIT:
fprintf(stderr,
"The function %s%s() references\n"
"the %s %s%s%s.\n"
@@ -1197,8 +1227,8 @@
to, sec2annotation(tosec), tosym, to_p,
fromsym, sec2annotation(tosec), tosym);
break;
- case DATA_TO_INIT: {
- const char **s = symbol_white_list;
+ case DATA_TO_ANY_INIT: {
+ const char *const *s = mismatch->symbol_white_list;
fprintf(stderr,
"The variable %s references\n"
"the %s %s%s%s\n"
@@ -1211,15 +1241,15 @@
fprintf(stderr, "\n");
break;
}
- case TEXT_TO_EXIT:
+ case TEXT_TO_ANY_EXIT:
fprintf(stderr,
"The function %s() references a %s in an exit section.\n"
"Often the %s %s%s has valid usage outside the exit section\n"
"and the fix is to remove the %sannotation of %s.\n",
fromsym, to, to, tosym, to_p, sec2annotation(tosec), tosym);
break;
- case DATA_TO_EXIT: {
- const char **s = symbol_white_list;
+ case DATA_TO_ANY_EXIT: {
+ const char *const *s = mismatch->symbol_white_list;
fprintf(stderr,
"The variable %s references\n"
"the %s %s%s%s\n"
@@ -1232,8 +1262,8 @@
fprintf(stderr, "\n");
break;
}
- case XXXINIT_TO_INIT:
- case XXXEXIT_TO_EXIT:
+ case XXXINIT_TO_SOME_INIT:
+ case XXXEXIT_TO_SOME_EXIT:
fprintf(stderr,
"The %s %s%s%s references\n"
"a %s %s%s%s.\n"
@@ -1243,7 +1273,7 @@
to, sec2annotation(tosec), tosym, to_p,
tosym, fromsym, tosym);
break;
- case INIT_TO_EXIT:
+ case ANY_INIT_TO_ANY_EXIT:
fprintf(stderr,
"The %s %s%s%s references\n"
"a %s %s%s%s.\n"
@@ -1256,7 +1286,7 @@
to, sec2annotation(tosec), tosym, to_p,
sec2annotation(tosec), tosym, to_p);
break;
- case EXIT_TO_INIT:
+ case ANY_EXIT_TO_ANY_INIT:
fprintf(stderr,
"The %s %s%s%s references\n"
"a %s %s%s%s.\n"
@@ -1275,8 +1305,6 @@
"Fix this by removing the %sannotation of %s "
"or drop the export.\n",
tosym, sec2annotation(tosec), sec2annotation(tosec), tosym);
- case NO_MISMATCH:
- /* To get warnings on missing members */
break;
}
fprintf(stderr, "\n");
@@ -1286,11 +1314,11 @@
Elf_Rela *r, Elf_Sym *sym, const char *fromsec)
{
const char *tosec;
- enum mismatch mismatch;
+ const struct sectioncheck *mismatch;
tosec = sec_name(elf, sym->st_shndx);
mismatch = section_mismatch(fromsec, tosec);
- if (mismatch != NO_MISMATCH) {
+ if (mismatch) {
Elf_Sym *to;
Elf_Sym *from;
const char *tosym;
@@ -1302,7 +1330,8 @@
tosym = sym_name(elf, to);
/* check whitelist - we may ignore it */
- if (secref_whitelist(fromsec, fromsym, tosec, tosym)) {
+ if (secref_whitelist(mismatch,
+ fromsec, fromsym, tosec, tosym)) {
report_sec_mismatch(modname, mismatch,
fromsec, r->r_offset, fromsym,
is_function(from), tosec, tosym,
@@ -1318,7 +1347,7 @@
int section = sechdr->sh_info;
return (void *)elf->hdr + sechdrs[section].sh_offset +
- (r->r_offset - sechdrs[section].sh_addr);
+ r->r_offset - sechdrs[section].sh_addr;
}
static int addend_386_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r)
diff --git a/scripts/namespace.pl b/scripts/namespace.pl
index c6e88c6..361d0f7 100755
--- a/scripts/namespace.pl
+++ b/scripts/namespace.pl
@@ -175,12 +175,11 @@
}
if (! -e "$source.c" && ! -e "$source.S") {
# No obvious source, exclude the object if it is conglomerate
- if (! open(OBJDUMPDATA, "$objdump $basename|")) {
- printf STDERR "$objdump $fullname failed $!\n";
- return;
- }
+ open(my $objdumpdata, "$objdump $basename|")
+ or die "$objdump $fullname failed $!\n";
+
my $comment;
- while (<OBJDUMPDATA>) {
+ while (<$objdumpdata>) {
chomp();
if (/^In archive/) {
# Archives are always conglomerate
@@ -190,18 +189,18 @@
next if (! /^[ 0-9a-f]{5,} /);
$comment .= substr($_, 43);
}
- close(OBJDUMPDATA);
+ close($objdumpdata);
+
if (!defined($comment) || $comment !~ /GCC\:.*GCC\:/m) {
printf STDERR "No source file found for $fullname\n";
}
return;
}
- if (! open(NMDATA, "$nm $basename|")) {
- printf STDERR "$nm $fullname failed $!\n";
- return;
- }
+ open (my $nmdata, "$nm $basename|")
+ or die "$nm $fullname failed $!\n";
+
my @nmdata;
- while (<NMDATA>) {
+ while (<$nmdata>) {
chop;
($type, $name) = (split(/ +/, $_, 3))[1..2];
# Expected types
@@ -268,7 +267,8 @@
}
}
}
- close(NMDATA);
+ close($nmdata);
+
if ($#nmdata < 0) {
if (
$fullname ne "lib/brlock.o"
@@ -316,8 +316,7 @@
sub list_multiply_defined
{
- my ($name, $module);
- foreach $name (keys(%def)) {
+ foreach my $name (keys(%def)) {
if ($#{$def{$name}} > 0) {
# Special case for cond_syscall
if ($#{$def{$name}} == 1 && $name =~ /^sys_/ &&
@@ -333,8 +332,9 @@
&drop_def("arch/x86/kernel/vsyscall-sysenter_32.o", $name);
next;
}
+
printf "$name is multiply defined in :-\n";
- foreach $module (@{$def{$name}}) {
+ foreach my $module (@{$def{$name}}) {
printf "\t$module\n";
}
}
@@ -343,12 +343,13 @@
sub resolve_external_references
{
- my ($object, $type, $name, $i, $j, $kstrtab, $ksymtab, $export);
+ my ($kstrtab, $ksymtab, $export);
+
printf "\n";
- foreach $object (keys(%nmdata)) {
+ foreach my $object (keys(%nmdata)) {
my $nmdata = $nmdata{$object};
- for ($i = 0; $i <= $#{$nmdata}; ++$i) {
- ($type, $name) = split(' ', $nmdata->[$i], 2);
+ for (my $i = 0; $i <= $#{$nmdata}; ++$i) {
+ my ($type, $name) = split(' ', $nmdata->[$i], 2);
if ($type eq "U" || $type eq "w") {
if (exists($def{$name}) || exists($ksymtab{$name})) {
# add the owning object to the nmdata
@@ -357,7 +358,7 @@
$kstrtab = "R __kstrtab_$name";
$ksymtab = "R __ksymtab_$name";
$export = 0;
- for ($j = 0; $j <= $#{$nmdata}; ++$j) {
+ for (my $j = 0; $j <= $#{$nmdata}; ++$j) {
if ($nmdata->[$j] eq $kstrtab ||
$nmdata->[$j] eq $ksymtab) {
$export = 1;
@@ -424,11 +425,11 @@
sub list_extra_externals
{
my %noref = ();
- my ($name, @module, $module, $export);
- foreach $name (keys(%def)) {
+
+ foreach my $name (keys(%def)) {
if (! exists($ref{$name})) {
- @module = @{$def{$name}};
- foreach $module (@module) {
+ my @module = @{$def{$name}};
+ foreach my $module (@module) {
if (! exists($noref{$module})) {
$noref{$module} = [];
}
@@ -438,16 +439,16 @@
}
if (%noref) {
printf "\nExternally defined symbols with no external references\n";
- foreach $module (sort(keys(%noref))) {
+ foreach my $module (sort(keys(%noref))) {
printf " $module\n";
foreach (sort(@{$noref{$module}})) {
- if (exists($export{$_})) {
- $export = " (export only)";
- }
- else {
- $export = "";
- }
- printf " $_$export\n";
+ my $export;
+ if (exists($export{$_})) {
+ $export = " (export only)";
+ } else {
+ $export = "";
+ }
+ printf " $_$export\n";
}
}
}
diff --git a/scripts/package/Makefile b/scripts/package/Makefile
index 62fcc3a..3a681ef 100644
--- a/scripts/package/Makefile
+++ b/scripts/package/Makefile
@@ -44,7 +44,7 @@
fi
$(MAKE) clean
$(PREV) ln -sf $(srctree) $(KERNELPATH)
- $(CONFIG_SHELL) $(srctree)/scripts/setlocalversion > $(objtree)/.scmversion
+ $(CONFIG_SHELL) $(srctree)/scripts/setlocalversion --scm-only > $(objtree)/.scmversion
$(PREV) tar -cz $(RCS_TAR_IGNORE) -f $(KERNELPATH).tar.gz $(KERNELPATH)/.
$(PREV) rm $(KERNELPATH)
rm -f $(objtree)/.scmversion
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index 8b357b0..07f2fbd 100644
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -18,6 +18,8 @@
cp debian/copyright "$pdir/usr/share/doc/$pname/"
cp debian/changelog "$pdir/usr/share/doc/$pname/changelog.Debian"
gzip -9 "$pdir/usr/share/doc/$pname/changelog.Debian"
+ sh -c "cd '$pdir'; find . -type f ! -path './DEBIAN/*' -printf '%P\0' \
+ | xargs -r0 md5sum > DEBIAN/md5sums"
# Fix ownership and permissions
chown -R root:root "$pdir"
diff --git a/scripts/package/mkspec b/scripts/package/mkspec
index fa27f3d..15440f5 100755
--- a/scripts/package/mkspec
+++ b/scripts/package/mkspec
@@ -39,7 +39,7 @@
echo "Source: kernel-$__KERNELRELEASE.tar.gz"
fi
-echo "BuildRoot: /var/tmp/%{name}-%{PACKAGE_VERSION}-root"
+echo "BuildRoot: %{_tmppath}/%{name}-%{PACKAGE_VERSION}-root"
echo "Provides: $PROVIDES"
echo "%define __spec_install_post /usr/lib/rpm/brp-compress || :"
echo "%define debug_package %{nil}"
diff --git a/scripts/profile2linkerlist.pl b/scripts/profile2linkerlist.pl
index cb4260e..6943fa7 100644
--- a/scripts/profile2linkerlist.pl
+++ b/scripts/profile2linkerlist.pl
@@ -7,15 +7,13 @@
# usage:
# readprofile | sort -rn | perl profile2linkerlist.pl > functionlist
#
+use strict;
while (<>) {
my $line = $_;
$_ =~ /\W*[0-9]+\W*([a-zA-Z\_0-9]+)\W*[0-9]+/;
- if ( ($line =~ /unknown/) || ($line =~ /total/)) {
-
- } else {
- print "*(.text.$1)\n";
- }
+ print "*(.text.$1)\n"
+ unless ($line =~ /unknown/) || ($line =~ /total/);
}
diff --git a/scripts/rt-tester/rt-tester.py b/scripts/rt-tester/rt-tester.py
index 4c79660..44423b4 100644
--- a/scripts/rt-tester/rt-tester.py
+++ b/scripts/rt-tester/rt-tester.py
@@ -1,4 +1,4 @@
-#!/usr/bin/env python
+#!/usr/bin/python
#
# rt-mutex tester
#
diff --git a/scripts/setlocalversion b/scripts/setlocalversion
index 46989b8..d6a866e 100755
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -10,73 +10,158 @@
#
usage() {
- echo "Usage: $0 [srctree]" >&2
+ echo "Usage: $0 [--scm-only] [srctree]" >&2
exit 1
}
-cd "${1:-.}" || usage
+scm_only=false
+srctree=.
+if test "$1" = "--scm-only"; then
+ scm_only=true
+ shift
+fi
+if test $# -gt 0; then
+ srctree=$1
+ shift
+fi
+if test $# -gt 0 -o ! -d "$srctree"; then
+ usage
+fi
-# Check for git and a git repo.
-if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then
+scm_version()
+{
+ local short=false
- # If we are at a tagged commit (like "v2.6.30-rc6"), we ignore it,
- # because this version is defined in the top level Makefile.
- if [ -z "`git describe --exact-match 2>/dev/null`" ]; then
+ cd "$srctree"
+ if test -e .scmversion; then
+ cat "$_"
+ return
+ fi
+ if test "$1" = "--short"; then
+ short=true
+ fi
- # If we are past a tagged commit (like "v2.6.30-rc5-302-g72357d5"),
- # we pretty print it.
- if atag="`git describe 2>/dev/null`"; then
- echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+ # Check for git and a git repo.
+ if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then
- # If we don't have a tag at all we print -g{commitish}.
- else
- printf '%s%s' -g $head
+ # If we are at a tagged commit (like "v2.6.30-rc6"), we ignore
+ # it, because this version is defined in the top level Makefile.
+ if [ -z "`git describe --exact-match 2>/dev/null`" ]; then
+
+ # If only the short version is requested, don't bother
+ # running further git commands
+ if $short; then
+ echo "+"
+ return
+ fi
+ # If we are past a tagged commit (like
+ # "v2.6.30-rc5-302-g72357d5"), we pretty print it.
+ if atag="`git describe 2>/dev/null`"; then
+ echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+
+ # If we don't have a tag at all we print -g{commitish}.
+ else
+ printf '%s%s' -g $head
+ fi
fi
+
+ # Is this git on svn?
+ if git config --get svn-remote.svn.url >/dev/null; then
+ printf -- '-svn%s' "`git svn find-rev $head`"
+ fi
+
+ # Update index only on r/w media
+ [ -w . ] && git update-index --refresh --unmerged > /dev/null
+
+ # Check for uncommitted changes
+ if git diff-index --name-only HEAD | grep -v "^scripts/package" \
+ | read dummy; then
+ printf '%s' -dirty
+ fi
+
+ # All done with git
+ return
fi
- # Is this git on svn?
- if git config --get svn-remote.svn.url >/dev/null; then
- printf -- '-svn%s' "`git svn find-rev $head`"
+ # Check for mercurial and a mercurial repo.
+ if hgid=`hg id 2>/dev/null`; then
+ tag=`printf '%s' "$hgid" | cut -d' ' -f2`
+
+ # Do we have an untagged version?
+ if [ -z "$tag" -o "$tag" = tip ]; then
+ id=`printf '%s' "$hgid" | sed 's/[+ ].*//'`
+ printf '%s%s' -hg "$id"
+ fi
+
+ # Are there uncommitted changes?
+ # These are represented by + after the changeset id.
+ case "$hgid" in
+ *+|*+\ *) printf '%s' -dirty ;;
+ esac
+
+ # All done with mercurial
+ return
fi
- # Update index only on r/w media
- [ -w . ] && git update-index --refresh --unmerged > /dev/null
+ # Check for svn and a svn repo.
+ if rev=`svn info 2>/dev/null | grep '^Last Changed Rev'`; then
+ rev=`echo $rev | awk '{print $NF}'`
+ printf -- '-svn%s' "$rev"
- # Check for uncommitted changes
- if git diff-index --name-only HEAD | grep -v "^scripts/package" \
- | read dummy; then
- printf '%s' -dirty
+ # All done with svn
+ return
fi
+}
- # All done with git
+collect_files()
+{
+ local file res
+
+ for file; do
+ case "$file" in
+ *\~*)
+ continue
+ ;;
+ esac
+ if test -e "$file"; then
+ res="$res$(cat "$file")"
+ fi
+ done
+ echo "$res"
+}
+
+if $scm_only; then
+ scm_version
exit
fi
-# Check for mercurial and a mercurial repo.
-if hgid=`hg id 2>/dev/null`; then
- tag=`printf '%s' "$hgid" | cut -d' ' -f2`
+if test -e include/config/auto.conf; then
+ source "$_"
+else
+ echo "Error: kernelrelease not valid - run 'make prepare' to update it"
+ exit 1
+fi
- # Do we have an untagged version?
- if [ -z "$tag" -o "$tag" = tip ]; then
- id=`printf '%s' "$hgid" | sed 's/[+ ].*//'`
- printf '%s%s' -hg "$id"
+# localversion* files in the build and source directory
+res="$(collect_files localversion*)"
+if test ! "$srctree" -ef .; then
+ res="$res$(collect_files "$srctree"/localversion*)"
+fi
+
+# CONFIG_LOCALVERSION and LOCALVERSION (if set)
+res="${res}${CONFIG_LOCALVERSION}${LOCALVERSION}"
+
+# scm version string if not at a tagged commit
+if test "$CONFIG_LOCALVERSION_AUTO" = "y"; then
+ # full scm version string
+ res="$res$(scm_version)"
+else
+ # apped a plus sign if the repository is not in a clean tagged
+ # state and LOCALVERSION= is not specified
+ if test "${LOCALVERSION+set}" != "set"; then
+ scm=$(scm_version --short)
+ res="$res${scm:++}"
fi
-
- # Are there uncommitted changes?
- # These are represented by + after the changeset id.
- case "$hgid" in
- *+|*+\ *) printf '%s' -dirty ;;
- esac
-
- # All done with mercurial
- exit
fi
-# Check for svn and a svn repo.
-if rev=`svn info 2>/dev/null | grep '^Last Changed Rev'`; then
- rev=`echo $rev | awk '{print $NF}'`
- printf -- '-svn%s' "$rev"
-
- # All done with svn
- exit
-fi
+echo "$res"
diff --git a/scripts/show_delta b/scripts/show_delta
index 48a706a..17df305 100755
--- a/scripts/show_delta
+++ b/scripts/show_delta
@@ -1,4 +1,4 @@
-#!/usr/bin/env python
+#!/usr/bin/python
#
# show_deltas: Read list of printk messages instrumented with
# time data, and format with time deltas.
diff --git a/scripts/tags.sh b/scripts/tags.sh
index 1a0c44d..8509bb5 100755
--- a/scripts/tags.sh
+++ b/scripts/tags.sh
@@ -5,7 +5,7 @@
# mode may be any of: tags, TAGS, cscope
#
# Uses the following environment variables:
-# ARCH, SUBARCH, srctree, src, obj
+# ARCH, SUBARCH, SRCARCH, srctree, src, obj
if [ "$KBUILD_VERBOSE" = "1" ]; then
set -x
@@ -17,28 +17,48 @@
-name .git ) \
-prune -o"
-# Do not use full path is we do not use O=.. builds
+# Do not use full path if we do not use O=.. builds
+# Use make O=. {tags|cscope}
+# to force full paths for a non-O= build
if [ "${KBUILD_SRC}" = "" ]; then
tree=
else
tree=${srctree}/
fi
+# Find all available archs
+find_all_archs()
+{
+ ALLSOURCE_ARCHS=""
+ for arch in `ls ${tree}arch`; do
+ ALLSOURCE_ARCHS="${ALLSOURCE_ARCHS} "${arch##\/}
+ done
+}
+
# Detect if ALLSOURCE_ARCHS is set. If not, we assume SRCARCH
if [ "${ALLSOURCE_ARCHS}" = "" ]; then
ALLSOURCE_ARCHS=${SRCARCH}
+elif [ "${ALLSOURCE_ARCHS}" = "all" ]; then
+ find_all_archs
fi
# find sources in arch/$ARCH
find_arch_sources()
{
- find ${tree}arch/$1 $ignore -name "$2" -print;
+ for i in $archincludedir; do
+ prune="$prune -wholename $i -prune -o"
+ done
+ find ${tree}arch/$1 $ignore $prune -name "$2" -print;
}
# find sources in arch/$1/include
find_arch_include_sources()
{
- find ${tree}arch/$1/include $ignore -name "$2" -print;
+ include=$(find ${tree}arch/$1/ -name include -type d);
+ if [ -n "$include" ]; then
+ archincludedir="$archincludedir $include"
+ find $include $ignore -name "$2" -print;
+ fi
}
# find sources in include/
@@ -63,14 +83,15 @@
all_sources()
{
- for arch in $ALLSOURCE_ARCHS
- do
- find_sources $arch '*.[chS]'
- done
+ find_arch_include_sources ${SRCARCH} '*.[chS]'
if [ ! -z "$archinclude" ]; then
find_arch_include_sources $archinclude '*.[chS]'
fi
find_include_sources '*.[chS]'
+ for arch in $ALLSOURCE_ARCHS
+ do
+ find_sources $arch '*.[chS]'
+ done
find_other_sources '*.[chS]'
}
@@ -89,13 +110,7 @@
docscope()
{
- # always use absolute paths for cscope, as recommended by cscope
- # upstream
- case "$tree" in
- /*) ;;
- *) tree=$PWD/$tree ;;
- esac
- (cd /; echo \-k; echo \-q; all_sources) > cscope.files
+ (echo \-k; echo \-q; all_sources) > cscope.files
cscope -b -f cscope.out
}
diff --git a/security/keys/internal.h b/security/keys/internal.h
index 5d4402a..38783dc 100644
--- a/security/keys/internal.h
+++ b/security/keys/internal.h
@@ -124,6 +124,7 @@
extern int install_user_keyrings(void);
extern int install_thread_keyring_to_cred(struct cred *);
extern int install_process_keyring_to_cred(struct cred *);
+extern int install_session_keyring_to_cred(struct cred *, struct key *);
extern struct key *request_key_and_link(struct key_type *type,
const char *description,
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 8f4dce1..6261745 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -33,7 +33,7 @@
ret = strncpy_from_user(type, _type, len);
if (ret < 0)
- return -EFAULT;
+ return ret;
if (ret == 0 || ret >= len)
return -EINVAL;
@@ -1080,7 +1080,7 @@
return old_setting;
error:
abort_creds(new);
- return -EINVAL;
+ return ret;
} /* end keyctl_set_reqkey_keyring() */
@@ -1269,7 +1269,7 @@
goto not_permitted;
/* the parent must be single threaded */
- if (atomic_read(&parent->signal->count) != 1)
+ if (!thread_group_empty(parent))
goto not_permitted;
/* the parent and the child must have different session keyrings or
diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c
index 20a38fe..6b8e4ff 100644
--- a/security/keys/process_keys.c
+++ b/security/keys/process_keys.c
@@ -216,8 +216,7 @@
/*
* install a session keyring directly to a credentials struct
*/
-static int install_session_keyring_to_cred(struct cred *cred,
- struct key *keyring)
+int install_session_keyring_to_cred(struct cred *cred, struct key *keyring)
{
unsigned long flags;
struct key *old;
diff --git a/security/keys/request_key.c b/security/keys/request_key.c
index f656e9c..f5ec9ac 100644
--- a/security/keys/request_key.c
+++ b/security/keys/request_key.c
@@ -58,6 +58,38 @@
}
EXPORT_SYMBOL(complete_request_key);
+static int umh_keys_init(struct subprocess_info *info)
+{
+ struct cred *cred = (struct cred*)current_cred();
+ struct key *keyring = info->data;
+ /*
+ * This is called in context of freshly forked kthread before
+ * kernel_execve(), we can just change our ->session_keyring.
+ */
+ return install_session_keyring_to_cred(cred, keyring);
+}
+
+static void umh_keys_cleanup(struct subprocess_info *info)
+{
+ struct key *keyring = info->data;
+ key_put(keyring);
+}
+
+static int call_usermodehelper_keys(char *path, char **argv, char **envp,
+ struct key *session_keyring, enum umh_wait wait)
+{
+ gfp_t gfp_mask = (wait == UMH_NO_WAIT) ? GFP_ATOMIC : GFP_KERNEL;
+ struct subprocess_info *info =
+ call_usermodehelper_setup(path, argv, envp, gfp_mask);
+
+ if (!info)
+ return -ENOMEM;
+
+ call_usermodehelper_setfns(info, umh_keys_init, umh_keys_cleanup,
+ key_get(session_keyring));
+ return call_usermodehelper_exec(info, wait);
+}
+
/*
* request userspace finish the construction of a key
* - execute "/sbin/request-key <op> <key> <uid> <gid> <keyring> <keyring> <keyring>"
diff --git a/sound/aoa/soundbus/i2sbus/core.c b/sound/aoa/soundbus/i2sbus/core.c
index 6789337..3ff8cc5 100644
--- a/sound/aoa/soundbus/i2sbus/core.c
+++ b/sound/aoa/soundbus/i2sbus/core.c
@@ -437,9 +437,11 @@
}
static struct macio_driver i2sbus_drv = {
- .name = "soundbus-i2s",
- .owner = THIS_MODULE,
- .match_table = i2sbus_match,
+ .driver = {
+ .name = "soundbus-i2s",
+ .owner = THIS_MODULE,
+ .of_match_table = i2sbus_match,
+ },
.probe = i2sbus_probe,
.remove = i2sbus_remove,
#ifdef CONFIG_PM
diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c
index 428121a..10c3a87 100644
--- a/sound/atmel/ac97c.c
+++ b/sound/atmel/ac97c.c
@@ -657,7 +657,7 @@
if (sr & AC97C_SR_CAEVT) {
struct snd_pcm_runtime *runtime;
int offset, next_period, block_size;
- dev_info(&chip->pdev->dev, "channel A event%s%s%s%s%s%s\n",
+ dev_dbg(&chip->pdev->dev, "channel A event%s%s%s%s%s%s\n",
casr & AC97C_CSR_OVRUN ? " OVRUN" : "",
casr & AC97C_CSR_RXRDY ? " RXRDY" : "",
casr & AC97C_CSR_UNRUN ? " UNRUN" : "",
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index a2ff861..e9d98be 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -345,7 +345,9 @@
new_hw_ptr = hw_base + pos;
}
__delta:
- delta = (new_hw_ptr - old_hw_ptr) % runtime->boundary;
+ delta = new_hw_ptr - old_hw_ptr;
+ if (delta < 0)
+ delta += runtime->boundary;
if (xrun_debug(substream, in_interrupt ?
XRUN_DEBUG_PERIODUPDATE : XRUN_DEBUG_HWPTRUPDATE)) {
char name[16];
@@ -439,8 +441,13 @@
snd_pcm_playback_silence(substream, new_hw_ptr);
if (in_interrupt) {
- runtime->hw_ptr_interrupt = new_hw_ptr -
- (new_hw_ptr % runtime->period_size);
+ delta = new_hw_ptr - runtime->hw_ptr_interrupt;
+ if (delta < 0)
+ delta += runtime->boundary;
+ delta -= (snd_pcm_uframes_t)delta % runtime->period_size;
+ runtime->hw_ptr_interrupt += delta;
+ if (runtime->hw_ptr_interrupt >= runtime->boundary)
+ runtime->hw_ptr_interrupt -= runtime->boundary;
}
runtime->hw_ptr_base = hw_base;
runtime->status->hw_ptr = new_hw_ptr;
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 644c2bb..303ac04 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -27,7 +27,6 @@
#include <linux/pm_qos_params.h>
#include <linux/uio.h>
#include <linux/dma-mapping.h>
-#include <linux/math64.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/info.h>
@@ -370,38 +369,6 @@
return usecs;
}
-static int calc_boundary(struct snd_pcm_runtime *runtime)
-{
- u_int64_t boundary;
-
- boundary = (u_int64_t)runtime->buffer_size *
- (u_int64_t)runtime->period_size;
-#if BITS_PER_LONG < 64
- /* try to find lowest common multiple for buffer and period */
- if (boundary > LONG_MAX - runtime->buffer_size) {
- u_int32_t remainder = -1;
- u_int32_t divident = runtime->buffer_size;
- u_int32_t divisor = runtime->period_size;
- while (remainder) {
- remainder = divident % divisor;
- if (remainder) {
- divident = divisor;
- divisor = remainder;
- }
- }
- boundary = div_u64(boundary, divisor);
- if (boundary > LONG_MAX - runtime->buffer_size)
- return -ERANGE;
- }
-#endif
- if (boundary == 0)
- return -ERANGE;
- runtime->boundary = boundary;
- while (runtime->boundary * 2 <= LONG_MAX - runtime->buffer_size)
- runtime->boundary *= 2;
- return 0;
-}
-
static int snd_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
@@ -477,9 +444,9 @@
runtime->stop_threshold = runtime->buffer_size;
runtime->silence_threshold = 0;
runtime->silence_size = 0;
- err = calc_boundary(runtime);
- if (err < 0)
- goto _error;
+ runtime->boundary = runtime->buffer_size;
+ while (runtime->boundary * 2 <= LONG_MAX - runtime->buffer_size)
+ runtime->boundary *= 2;
snd_pcm_timer_resolution_change(substream);
runtime->status->state = SNDRV_PCM_STATE_SETUP;
diff --git a/sound/mips/au1x00.c b/sound/mips/au1x00.c
index 3e763d6..446cf97 100644
--- a/sound/mips/au1x00.c
+++ b/sound/mips/au1x00.c
@@ -516,6 +516,7 @@
break;
if (i == 0x5000) {
printk(KERN_ERR "au1000 AC97: AC97 command read timeout\n");
+ spin_unlock(&au1000->ac97_lock);
return 0;
}
diff --git a/sound/oss/dmasound/dmasound_atari.c b/sound/oss/dmasound/dmasound_atari.c
index 1f47741..13c2144 100644
--- a/sound/oss/dmasound/dmasound_atari.c
+++ b/sound/oss/dmasound/dmasound_atari.c
@@ -1277,7 +1277,7 @@
* (almost) like on the TT.
*/
write_sq_ignore_int = 0;
- return IRQ_HANDLED;
+ goto out;
}
if (!write_sq.active) {
@@ -1285,7 +1285,7 @@
* the sq variables, so better don't do anything here.
*/
WAKE_UP(write_sq.sync_queue);
- return IRQ_HANDLED;
+ goto out;
}
/* Probably ;) one frame is finished. Well, in fact it may be that a
@@ -1322,6 +1322,7 @@
/* We are not playing after AtaPlay(), so there
is nothing to play any more. Wake up a process
waiting for audio output to drain. */
+out:
spin_unlock(&dmasound.lock);
return IRQ_HANDLED;
}
diff --git a/sound/pci/asihpi/asihpi.c b/sound/pci/asihpi/asihpi.c
index f74c737..1db586a 100644
--- a/sound/pci/asihpi/asihpi.c
+++ b/sound/pci/asihpi/asihpi.c
@@ -2578,6 +2578,9 @@
if (err)
return -err;
+ memset(&prev_ctl, 0, sizeof(prev_ctl));
+ prev_ctl.control_type = -1;
+
for (idx = 0; idx < 2000; idx++) {
err = hpi_mixer_get_control_by_index(
ss, asihpi->h_mixer,
diff --git a/sound/pci/asihpi/hpi.h b/sound/pci/asihpi/hpi.h
index 99400de..0173bbe 100644
--- a/sound/pci/asihpi/hpi.h
+++ b/sound/pci/asihpi/hpi.h
@@ -50,7 +50,7 @@
#define HPI_VER_RELEASE(v) ((int)(v & 0xFF))
/* Use single digits for versions less that 10 to avoid octal. */
-#define HPI_VER HPI_VERSION_CONSTRUCTOR(4L, 3, 18)
+#define HPI_VER HPI_VERSION_CONSTRUCTOR(4L, 3, 25)
/* Library version as documented in hpi-api-versions.txt */
#define HPI_LIB_VER HPI_VERSION_CONSTRUCTOR(9, 0, 0)
@@ -1632,6 +1632,12 @@
u16 hpi_tuner_get_hd_radio_signal_quality(const struct hpi_hsubsys *ph_subsys,
u32 h_control, u32 *pquality);
+u16 hpi_tuner_get_hd_radio_signal_blend(const struct hpi_hsubsys *ph_subsys,
+ u32 h_control, u32 *pblend);
+
+u16 hpi_tuner_set_hd_radio_signal_blend(const struct hpi_hsubsys *ph_subsys,
+ u32 h_control, const u32 blend);
+
/****************************/
/* PADs control */
/****************************/
diff --git a/sound/pci/asihpi/hpi6000.c b/sound/pci/asihpi/hpi6000.c
index 839ecb2..12dab5e 100644
--- a/sound/pci/asihpi/hpi6000.c
+++ b/sound/pci/asihpi/hpi6000.c
@@ -691,9 +691,6 @@
case 0x6200:
boot_load_family = HPI_ADAPTER_FAMILY_ASI(0x6200);
break;
- case 0x8800:
- boot_load_family = HPI_ADAPTER_FAMILY_ASI(0x8800);
- break;
default:
return HPI6000_ERROR_UNHANDLED_SUBSYS_ID;
}
@@ -1775,7 +1772,6 @@
u16 error = 0;
u16 dsp_index = 0;
u16 num_dsp = ((struct hpi_hw_obj *)pao->priv)->num_dsp;
- hpios_dsplock_lock(pao);
if (num_dsp < 2)
dsp_index = 0;
@@ -1796,6 +1792,8 @@
}
}
}
+
+ hpios_dsplock_lock(pao);
error = hpi6000_message_response_sequence(pao, dsp_index, phm, phr);
/* maybe an error response */
diff --git a/sound/pci/asihpi/hpi6205.c b/sound/pci/asihpi/hpi6205.c
index 5e88c1f..3b44134 100644
--- a/sound/pci/asihpi/hpi6205.c
+++ b/sound/pci/asihpi/hpi6205.c
@@ -941,11 +941,11 @@
}
-static long outstream_get_space_available(struct hpi_hostbuffer_status
+static u32 outstream_get_space_available(struct hpi_hostbuffer_status
*status)
{
- return status->size_in_bytes - ((long)(status->host_index) -
- (long)(status->dSP_index));
+ return status->size_in_bytes - (status->host_index -
+ status->dSP_index);
}
static void outstream_write(struct hpi_adapter_obj *pao,
@@ -954,7 +954,7 @@
struct hpi_hw_obj *phw = pao->priv;
struct bus_master_interface *interface = phw->p_interface_buffer;
struct hpi_hostbuffer_status *status;
- long space_available;
+ u32 space_available;
if (!phw->outstream_host_buffer_size[phm->obj_index]) {
/* there is no BBM buffer, write via message */
@@ -966,23 +966,16 @@
status = &interface->outstream_host_buffer_status[phm->obj_index];
if (phw->flag_outstream_just_reset[phm->obj_index]) {
- /* Format can only change after reset. Must tell DSP. */
- u16 function = phm->function;
- phw->flag_outstream_just_reset[phm->obj_index] = 0;
- phm->function = HPI_OSTREAM_SET_FORMAT;
- hw_message(pao, phm, phr); /* send the format to the DSP */
- phm->function = function;
- if (phr->error)
- return;
- }
-#if 1
- if (phw->flag_outstream_just_reset[phm->obj_index]) {
/* First OutStremWrite() call following reset will write data to the
- adapter's buffers, reducing delay before stream can start
+ adapter's buffers, reducing delay before stream can start. The DSP
+ takes care of setting the stream data format using format information
+ embedded in phm.
*/
int partial_write = 0;
unsigned int original_size = 0;
+ phw->flag_outstream_just_reset[phm->obj_index] = 0;
+
/* Send the first buffer to the DSP the old way. */
/* Limit size of first transfer - */
/* expect that this will not usually be triggered. */
@@ -1012,10 +1005,9 @@
original_size - HPI6205_SIZEOF_DATA;
phm->u.d.u.data.pb_data += HPI6205_SIZEOF_DATA;
}
-#endif
space_available = outstream_get_space_available(status);
- if (space_available < (long)phm->u.d.u.data.data_size) {
+ if (space_available < phm->u.d.u.data.data_size) {
phr->error = HPI_ERROR_INVALID_DATASIZE;
return;
}
@@ -1026,7 +1018,7 @@
&& hpios_locked_mem_valid(&phw->outstream_host_buffers[phm->
obj_index])) {
u8 *p_bbm_data;
- long l_first_write;
+ u32 l_first_write;
u8 *p_app_data = (u8 *)phm->u.d.u.data.pb_data;
if (hpios_locked_mem_get_virt_addr(&phw->
@@ -1256,9 +1248,9 @@
hw_message(pao, phm, phr);
}
-static long instream_get_bytes_available(struct hpi_hostbuffer_status *status)
+static u32 instream_get_bytes_available(struct hpi_hostbuffer_status *status)
{
- return (long)(status->dSP_index) - (long)(status->host_index);
+ return status->dSP_index - status->host_index;
}
static void instream_read(struct hpi_adapter_obj *pao,
@@ -1267,9 +1259,9 @@
struct hpi_hw_obj *phw = pao->priv;
struct bus_master_interface *interface = phw->p_interface_buffer;
struct hpi_hostbuffer_status *status;
- long data_available;
+ u32 data_available;
u8 *p_bbm_data;
- long l_first_read;
+ u32 l_first_read;
u8 *p_app_data = (u8 *)phm->u.d.u.data.pb_data;
if (!phw->instream_host_buffer_size[phm->obj_index]) {
@@ -1280,7 +1272,7 @@
status = &interface->instream_host_buffer_status[phm->obj_index];
data_available = instream_get_bytes_available(status);
- if (data_available < (long)phm->u.d.u.data.data_size) {
+ if (data_available < phm->u.d.u.data.data_size) {
phr->error = HPI_ERROR_INVALID_DATASIZE;
return;
}
@@ -1369,6 +1361,9 @@
case HPI_ADAPTER_FAMILY_ASI(0x6500):
firmware_id = HPI_ADAPTER_FAMILY_ASI(0x6600);
break;
+ case HPI_ADAPTER_FAMILY_ASI(0x8800):
+ firmware_id = HPI_ADAPTER_FAMILY_ASI(0x8900);
+ break;
}
boot_code_id[1] = firmware_id;
diff --git a/sound/pci/asihpi/hpi_internal.h b/sound/pci/asihpi/hpi_internal.h
index f1cd6f1..fdd0ce0 100644
--- a/sound/pci/asihpi/hpi_internal.h
+++ b/sound/pci/asihpi/hpi_internal.h
@@ -232,6 +232,8 @@
#define HPI_TUNER_HDRADIO_SDK_VERSION HPI_CTL_ATTR(TUNER, 13)
/** HD Radio DSP firmware version. */
#define HPI_TUNER_HDRADIO_DSP_VERSION HPI_CTL_ATTR(TUNER, 14)
+/** HD Radio signal blend (force analog, or automatic). */
+#define HPI_TUNER_HDRADIO_BLEND HPI_CTL_ATTR(TUNER, 15)
/** \} */
@@ -478,8 +480,10 @@
/** First 2 hex digits define the adapter family */
#define HPI_ADAPTER_FAMILY_MASK 0xff00
+#define HPI_MODULE_FAMILY_MASK 0xfff0
#define HPI_ADAPTER_FAMILY_ASI(f) (f & HPI_ADAPTER_FAMILY_MASK)
+#define HPI_MODULE_FAMILY_ASI(f) (f & HPI_MODULE_FAMILY_MASK)
#define HPI_ADAPTER_ASI(f) (f)
/******************************************* message types */
@@ -970,6 +974,7 @@
u32 mode;
u32 value;
} mode;
+ u32 blend;
} tuner;
} u;
};
diff --git a/sound/pci/asihpi/hpicmn.c b/sound/pci/asihpi/hpicmn.c
index 565102c..fcd6453 100644
--- a/sound/pci/asihpi/hpicmn.c
+++ b/sound/pci/asihpi/hpicmn.c
@@ -347,20 +347,15 @@
found = 0;
break;
case HPI_CONTROL_TUNER:
- {
- struct hpi_control_cache_single *pCT =
- (struct hpi_control_cache_single *)pI;
- if (phm->u.c.attribute == HPI_TUNER_FREQ)
- phr->u.c.param1 = pCT->u.t.freq_ink_hz;
- else if (phm->u.c.attribute == HPI_TUNER_BAND)
- phr->u.c.param1 = pCT->u.t.band;
- else if ((phm->u.c.attribute == HPI_TUNER_LEVEL)
- && (phm->u.c.param1 ==
- HPI_TUNER_LEVEL_AVERAGE))
- phr->u.c.param1 = pCT->u.t.level;
- else
- found = 0;
- }
+ if (phm->u.c.attribute == HPI_TUNER_FREQ)
+ phr->u.c.param1 = pC->u.t.freq_ink_hz;
+ else if (phm->u.c.attribute == HPI_TUNER_BAND)
+ phr->u.c.param1 = pC->u.t.band;
+ else if ((phm->u.c.attribute == HPI_TUNER_LEVEL)
+ && (phm->u.c.param1 == HPI_TUNER_LEVEL_AVERAGE))
+ phr->u.c.param1 = pC->u.t.level;
+ else
+ found = 0;
break;
case HPI_CONTROL_AESEBU_RECEIVER:
if (phm->u.c.attribute == HPI_AESEBURX_ERRORSTATUS)
@@ -503,6 +498,9 @@
struct hpi_control_cache_single *pC;
struct hpi_control_cache_info *pI;
+ if (phr->error)
+ return;
+
if (!find_control(phm, p_cache, &pI, &control_index))
return;
@@ -520,8 +518,6 @@
break;
case HPI_CONTROL_MULTIPLEXER:
/* mux does not return its setting on Set command. */
- if (phr->error)
- return;
if (phm->u.c.attribute == HPI_MULTIPLEXER_SOURCE) {
pC->u.x.source_node_type = (u16)phm->u.c.param1;
pC->u.x.source_node_index = (u16)phm->u.c.param2;
@@ -529,8 +525,6 @@
break;
case HPI_CONTROL_CHANNEL_MODE:
/* mode does not return its setting on Set command. */
- if (phr->error)
- return;
if (phm->u.c.attribute == HPI_CHANNEL_MODE_MODE)
pC->u.m.mode = (u16)phm->u.c.param1;
break;
@@ -545,20 +539,14 @@
pC->u.phantom_power.state = (u16)phm->u.c.param1;
break;
case HPI_CONTROL_AESEBU_TRANSMITTER:
- if (phr->error)
- return;
if (phm->u.c.attribute == HPI_AESEBUTX_FORMAT)
pC->u.aes3tx.format = phm->u.c.param1;
break;
case HPI_CONTROL_AESEBU_RECEIVER:
- if (phr->error)
- return;
if (phm->u.c.attribute == HPI_AESEBURX_FORMAT)
pC->u.aes3rx.source = phm->u.c.param1;
break;
case HPI_CONTROL_SAMPLECLOCK:
- if (phr->error)
- return;
if (phm->u.c.attribute == HPI_SAMPLECLOCK_SOURCE)
pC->u.clk.source = (u16)phm->u.c.param1;
else if (phm->u.c.attribute == HPI_SAMPLECLOCK_SOURCE_INDEX)
@@ -590,7 +578,7 @@
void hpi_free_control_cache(struct hpi_control_cache *p_cache)
{
- if ((p_cache->init) && (p_cache->p_info)) {
+ if (p_cache->init) {
kfree(p_cache->p_info);
p_cache->p_info = NULL;
p_cache->init = 0;
diff --git a/sound/pci/asihpi/hpifunc.c b/sound/pci/asihpi/hpifunc.c
index eda26b3..298eef3 100644
--- a/sound/pci/asihpi/hpifunc.c
+++ b/sound/pci/asihpi/hpifunc.c
@@ -2946,6 +2946,20 @@
HPI_TUNER_HDRADIO_SIGNAL_QUALITY, 0, 0, pquality, NULL);
}
+u16 hpi_tuner_get_hd_radio_signal_blend(const struct hpi_hsubsys *ph_subsys,
+ u32 h_control, u32 *pblend)
+{
+ return hpi_control_param_get(ph_subsys, h_control,
+ HPI_TUNER_HDRADIO_BLEND, 0, 0, pblend, NULL);
+}
+
+u16 hpi_tuner_set_hd_radio_signal_blend(const struct hpi_hsubsys *ph_subsys,
+ u32 h_control, const u32 blend)
+{
+ return hpi_control_param_set(ph_subsys, h_control,
+ HPI_TUNER_HDRADIO_BLEND, blend, 0);
+}
+
u16 hpi_tuner_getRDS(const struct hpi_hsubsys *ph_subsys, u32 h_control,
char *p_data)
{
@@ -3266,8 +3280,7 @@
void hpi_entity_free(struct hpi_entity *entity)
{
- if (entity != NULL)
- kfree(entity);
+ kfree(entity);
}
static u16 hpi_entity_alloc_and_copy(struct hpi_entity *src,
diff --git a/sound/pci/asihpi/hpios.c b/sound/pci/asihpi/hpios.c
index de615cf..742ee12 100644
--- a/sound/pci/asihpi/hpios.c
+++ b/sound/pci/asihpi/hpios.c
@@ -89,26 +89,3 @@
void hpios_locked_mem_free_all(void)
{
}
-
-void __iomem *hpios_map_io(struct pci_dev *pci_dev, int idx,
- unsigned int length)
-{
- HPI_DEBUG_LOG(DEBUG, "mapping %d %s %08llx-%08llx %04llx len 0x%x\n",
- idx, pci_dev->resource[idx].name,
- (unsigned long long)pci_resource_start(pci_dev, idx),
- (unsigned long long)pci_resource_end(pci_dev, idx),
- (unsigned long long)pci_resource_flags(pci_dev, idx), length);
-
- if (!(pci_resource_flags(pci_dev, idx) & IORESOURCE_MEM)) {
- HPI_DEBUG_LOG(ERROR, "not an io memory resource\n");
- return NULL;
- }
-
- if (length > pci_resource_len(pci_dev, idx)) {
- HPI_DEBUG_LOG(ERROR, "resource too small for requested %d \n",
- length);
- return NULL;
- }
-
- return ioremap(pci_resource_start(pci_dev, idx), length);
-}
diff --git a/sound/pci/asihpi/hpios.h b/sound/pci/asihpi/hpios.h
index a62c3f1..370f39b 100644
--- a/sound/pci/asihpi/hpios.h
+++ b/sound/pci/asihpi/hpios.h
@@ -166,13 +166,4 @@
void __iomem *ap_remapped_mem_base[HPI_MAX_ADAPTER_MEM_SPACES];
};
-static inline void hpios_unmap_io(void __iomem *addr,
- unsigned long size)
-{
- iounmap(addr);
-}
-
-void __iomem *hpios_map_io(struct pci_dev *pci_dev, int idx,
- unsigned int length);
-
#endif
diff --git a/sound/pci/aw2/aw2-alsa.c b/sound/pci/aw2/aw2-alsa.c
index 67921f9..c150022 100644
--- a/sound/pci/aw2/aw2-alsa.c
+++ b/sound/pci/aw2/aw2-alsa.c
@@ -26,7 +26,7 @@
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/pcm.h>
@@ -44,9 +44,6 @@
/*********************************
* DEFINES
********************************/
-#define PCI_VENDOR_ID_SAA7146 0x1131
-#define PCI_DEVICE_ID_SAA7146 0x7146
-
#define CTL_ROUTE_ANALOG 0
#define CTL_ROUTE_DIGITAL 1
@@ -165,7 +162,7 @@
MODULE_PARM_DESC(enable, "Enable Audiowerk2 soundcard.");
static DEFINE_PCI_DEVICE_TABLE(snd_aw2_ids) = {
- {PCI_VENDOR_ID_SAA7146, PCI_DEVICE_ID_SAA7146, 0, 0,
+ {PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA7146, 0, 0,
0, 0, 0},
{0}
};
@@ -419,7 +416,7 @@
{
struct snd_pcm_runtime *runtime = substream->runtime;
- snd_printdd(KERN_DEBUG "aw2: Playback_open \n");
+ snd_printdd(KERN_DEBUG "aw2: Playback_open\n");
runtime->hw = snd_aw2_playback_hw;
return 0;
}
@@ -435,7 +432,7 @@
{
struct snd_pcm_runtime *runtime = substream->runtime;
- snd_printdd(KERN_DEBUG "aw2: Capture_open \n");
+ snd_printdd(KERN_DEBUG "aw2: Capture_open\n");
runtime->hw = snd_aw2_capture_hw;
return 0;
}
diff --git a/sound/pci/emu10k1/emufx.c b/sound/pci/emu10k1/emufx.c
index 4b302d8..7a94014 100644
--- a/sound/pci/emu10k1/emufx.c
+++ b/sound/pci/emu10k1/emufx.c
@@ -35,6 +35,7 @@
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <linux/mutex.h>
+#include <linux/moduleparam.h>
#include <sound/core.h>
#include <sound/tlv.h>
@@ -50,6 +51,10 @@
#define EMU10K1_CENTER_LFE_FROM_FRONT
#endif
+static bool high_res_gpr_volume;
+module_param(high_res_gpr_volume, bool, 0444);
+MODULE_PARM_DESC(high_res_gpr_volume, "GPR mixer controls use 31-bit range.");
+
/*
* Tables
*/
@@ -296,6 +301,7 @@
/* EMU10k1/EMU10k2 DSP control db gain */
static const DECLARE_TLV_DB_SCALE(snd_emu10k1_db_scale1, -4000, 40, 1);
+static const DECLARE_TLV_DB_LINEAR(snd_emu10k1_db_linear, TLV_DB_GAIN_MUTE, 0);
static const u32 onoff_table[2] = {
0x00000000, 0x00000001
@@ -1072,10 +1078,17 @@
strcpy(ctl->id.name, name);
ctl->vcount = ctl->count = 1;
ctl->gpr[0] = gpr + 0; ctl->value[0] = defval;
- ctl->min = 0;
- ctl->max = 100;
- ctl->tlv = snd_emu10k1_db_scale1;
- ctl->translation = EMU10K1_GPR_TRANSLATION_TABLE100;
+ if (high_res_gpr_volume) {
+ ctl->min = 0;
+ ctl->max = 0x7fffffff;
+ ctl->tlv = snd_emu10k1_db_linear;
+ ctl->translation = EMU10K1_GPR_TRANSLATION_NONE;
+ } else {
+ ctl->min = 0;
+ ctl->max = 100;
+ ctl->tlv = snd_emu10k1_db_scale1;
+ ctl->translation = EMU10K1_GPR_TRANSLATION_TABLE100;
+ }
}
static void __devinit
@@ -1087,10 +1100,17 @@
ctl->vcount = ctl->count = 2;
ctl->gpr[0] = gpr + 0; ctl->value[0] = defval;
ctl->gpr[1] = gpr + 1; ctl->value[1] = defval;
- ctl->min = 0;
- ctl->max = 100;
- ctl->tlv = snd_emu10k1_db_scale1;
- ctl->translation = EMU10K1_GPR_TRANSLATION_TABLE100;
+ if (high_res_gpr_volume) {
+ ctl->min = 0;
+ ctl->max = 0x7fffffff;
+ ctl->tlv = snd_emu10k1_db_linear;
+ ctl->translation = EMU10K1_GPR_TRANSLATION_NONE;
+ } else {
+ ctl->min = 0;
+ ctl->max = 100;
+ ctl->tlv = snd_emu10k1_db_scale1;
+ ctl->translation = EMU10K1_GPR_TRANSLATION_TABLE100;
+ }
}
static void __devinit
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index a3d638c..ba2098d 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -784,6 +784,9 @@
pin->nid = nid;
pin->cfg = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_CONFIG_DEFAULT, 0);
+ pin->ctrl = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL,
+ 0);
}
return 0;
}
@@ -912,15 +915,38 @@
void snd_hda_shutup_pins(struct hda_codec *codec)
{
int i;
+ /* don't shut up pins when unloading the driver; otherwise it breaks
+ * the default pin setup at the next load of the driver
+ */
+ if (codec->bus->shutdown)
+ return;
for (i = 0; i < codec->init_pins.used; i++) {
struct hda_pincfg *pin = snd_array_elem(&codec->init_pins, i);
/* use read here for syncing after issuing each verb */
snd_hda_codec_read(codec, pin->nid, 0,
AC_VERB_SET_PIN_WIDGET_CONTROL, 0);
}
+ codec->pins_shutup = 1;
}
EXPORT_SYMBOL_HDA(snd_hda_shutup_pins);
+/* Restore the pin controls cleared previously via snd_hda_shutup_pins() */
+static void restore_shutup_pins(struct hda_codec *codec)
+{
+ int i;
+ if (!codec->pins_shutup)
+ return;
+ if (codec->bus->shutdown)
+ return;
+ for (i = 0; i < codec->init_pins.used; i++) {
+ struct hda_pincfg *pin = snd_array_elem(&codec->init_pins, i);
+ snd_hda_codec_write(codec, pin->nid, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL,
+ pin->ctrl);
+ }
+ codec->pins_shutup = 0;
+}
+
static void init_hda_cache(struct hda_cache_rec *cache,
unsigned int record_size);
static void free_hda_cache(struct hda_cache_rec *cache);
@@ -2907,6 +2933,7 @@
codec->afg ? codec->afg : codec->mfg,
AC_PWRST_D0);
restore_pincfgs(codec); /* restore all current pin configs */
+ restore_shutup_pins(codec);
hda_exec_init_verbs(codec);
if (codec->patch_ops.resume)
codec->patch_ops.resume(codec);
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 49e939e..5991d14 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -821,6 +821,7 @@
unsigned int pin_amp_workaround:1; /* pin out-amp takes index
* (e.g. Conexant codecs)
*/
+ unsigned int pins_shutup:1; /* pins are shut up */
unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */
#ifdef CONFIG_SND_HDA_POWER_SAVE
unsigned int power_on :1; /* current (global) power-state */
@@ -897,7 +898,9 @@
/* the struct for codec->pin_configs */
struct hda_pincfg {
hda_nid_t nid;
- unsigned int cfg;
+ unsigned char ctrl; /* current pin control value */
+ unsigned char pad; /* reserved */
+ unsigned int cfg; /* default configuration */
};
unsigned int snd_hda_codec_get_pincfg(struct hda_codec *codec, hda_nid_t nid);
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 170610e..1df25cf 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1097,6 +1097,7 @@
struct azx *chip = dev_id;
struct azx_dev *azx_dev;
u32 status;
+ u8 sd_status;
int i, ok;
spin_lock(&chip->reg_lock);
@@ -1110,8 +1111,10 @@
for (i = 0; i < chip->num_streams; i++) {
azx_dev = &chip->azx_dev[i];
if (status & azx_dev->sd_int_sta_mask) {
+ sd_status = azx_sd_readb(azx_dev, SD_STS);
azx_sd_writeb(azx_dev, SD_STS, SD_INT_MASK);
- if (!azx_dev->substream || !azx_dev->running)
+ if (!azx_dev->substream || !azx_dev->running ||
+ !(sd_status & SD_INT_COMPLETE))
continue;
/* check whether this IRQ is really acceptable */
ok = azx_position_ok(chip, azx_dev);
@@ -1910,11 +1913,11 @@
if (WARN_ONCE(!azx_dev->period_bytes,
"hda-intel: zero azx_dev->period_bytes"))
return -1; /* this shouldn't happen! */
- if (wallclk <= azx_dev->period_wallclk &&
+ if (wallclk < (azx_dev->period_wallclk * 5) / 4 &&
pos % azx_dev->period_bytes > azx_dev->period_bytes / 2)
/* NG - it's below the first next period boundary */
return bdl_pos_adj[chip->dev_index] ? 0 : -1;
- azx_dev->start_wallclk = wallclk;
+ azx_dev->start_wallclk += wallclk;
return 1; /* OK, it's fine */
}
@@ -2279,16 +2282,23 @@
* white/black-listing for position_fix
*/
static struct snd_pci_quirk position_fix_list[] __devinitdata = {
+ SND_PCI_QUIRK(0x1025, 0x009f, "Acer Aspire 5110", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01de, "Dell Precision 390", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01f6, "Dell Latitude 131L", POS_FIX_LPIB),
SND_PCI_QUIRK(0x103c, 0x306d, "HP dv3", POS_FIX_LPIB),
- SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1179, 0xff10, "Toshiba A100-259", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1297, 0x3166, "Shuttle", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1458, 0xa022, "ga-ma770-ud3", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1462, 0x1002, "MSI Wind U115", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1565, 0x820f, "Biostar Microtech", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1565, 0x8218, "Biostar Microtech", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1849, 0x0888, "775Dual-VSTA", POS_FIX_LPIB),
SND_PCI_QUIRK(0x8086, 0x2503, "DG965OT AAD63733-203", POS_FIX_LPIB),
SND_PCI_QUIRK(0x8086, 0xd601, "eMachines T5212", POS_FIX_LPIB),
{}
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index e863649..2bf2cb5 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -2975,6 +2975,8 @@
SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5),
SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5),
SND_PCI_QUIRK(0x17aa, 0x21b2, "Thinkpad X100e", CXT5066_IDEAPAD),
+ SND_PCI_QUIRK(0x17aa, 0x21b3, "Thinkpad Edge 13 (197)", CXT5066_IDEAPAD),
+ SND_PCI_QUIRK(0x17aa, 0x21b4, "Thinkpad Edge", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x3a0d, "ideapad", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo Thinkpad", CXT5066_THINKPAD),
{}
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 53538b0..ff614dd 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1268,8 +1268,10 @@
struct alc_spec *spec = codec->spec;
ass = codec->subsystem_id & 0xffff;
- if (ass != codec->bus->pci->subsystem_device && (ass & 1))
+ if (ass != codec->bus->pci->subsystem_device && (ass & 1)) {
+ spec->cdefine.enable_pcbeep = 1; /* assume always enabled */
goto do_sku;
+ }
nid = 0x1d;
if (codec->vendor_id == 0x10ec0260)
@@ -2547,7 +2549,7 @@
static int alc_build_controls(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- struct snd_kcontrol *kctl;
+ struct snd_kcontrol *kctl = NULL;
struct snd_kcontrol_new *knew;
int i, j, err;
unsigned int u;
@@ -2619,16 +2621,18 @@
}
/* assign Capture Source enums to NID */
- kctl = snd_hda_find_mixer_ctl(codec, "Capture Source");
- if (!kctl)
- kctl = snd_hda_find_mixer_ctl(codec, "Input Source");
- for (i = 0; kctl && i < kctl->count; i++) {
- hda_nid_t *nids = spec->capsrc_nids;
- if (!nids)
- nids = spec->adc_nids;
- err = snd_hda_add_nid(codec, kctl, i, nids[i]);
- if (err < 0)
- return err;
+ if (spec->capsrc_nids || spec->adc_nids) {
+ kctl = snd_hda_find_mixer_ctl(codec, "Capture Source");
+ if (!kctl)
+ kctl = snd_hda_find_mixer_ctl(codec, "Input Source");
+ for (i = 0; kctl && i < kctl->count; i++) {
+ hda_nid_t *nids = spec->capsrc_nids;
+ if (!nids)
+ nids = spec->adc_nids;
+ err = snd_hda_add_nid(codec, kctl, i, nids[i]);
+ if (err < 0)
+ return err;
+ }
}
if (spec->cap_mixer) {
const char *kname = kctl ? kctl->id.name : NULL;
@@ -6948,7 +6952,7 @@
.num_items = 3,
.items = {
{ "Mic", 0x1 },
- { "Line", 0x2 },
+ { "Line", 0x7 },
{ "CD", 0x4 },
},
};
@@ -7025,6 +7029,14 @@
},
};
+static struct hda_input_mux alc889A_imac91_capture_source = {
+ .num_items = 2,
+ .items = {
+ { "Mic", 0x01 },
+ { "Line", 0x2 }, /* Not sure! */
+ },
+};
+
/*
* 2ch mode
*/
@@ -7461,8 +7473,8 @@
HDA_BIND_MUTE ("LFE Playback Switch", 0x0e, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0f, 0x00, HDA_OUTPUT),
HDA_BIND_MUTE ("Headphone Playback Switch", 0x0f, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x07, HDA_INPUT),
+ HDA_CODEC_MUTE ("Line Playback Switch", 0x0b, 0x07, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
HDA_CODEC_MUTE ("Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
HDA_CODEC_VOLUME("Line Boost", 0x15, 0x00, HDA_INPUT),
@@ -7486,15 +7498,8 @@
};
static struct snd_kcontrol_new alc885_imac91_mixer[] = {
- HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
- HDA_BIND_MUTE ("Line-Out Playback Switch", 0x0c, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE ("Speaker Playback Switch", 0x14, 0x00, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x00, HDA_INPUT),
- HDA_CODEC_MUTE ("Mic Playback Switch", 0x0b, 0x00, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Boost", 0x18, 0x00, HDA_INPUT),
+ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE("Speaker Playback Switch", 0x0c, 0x02, HDA_INPUT),
{ } /* end */
};
@@ -7852,10 +7857,9 @@
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0x1)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0x7)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0x4)},
{ }
};
@@ -7995,61 +7999,56 @@
/* iMac 9,1 */
static struct hda_verb alc885_imac91_init_verbs[] = {
- /* Line-Out mixer: unmute input/output amp left and right (volume = 0) */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* Internal Speaker Pin (0x0c) */
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, (PIN_OUT | AC_PINCTL_VREF_50) },
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x18, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, (PIN_OUT | AC_PINCTL_VREF_50) },
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x1a, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* HP Pin: Rear */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, (ALC880_HP_EVENT | AC_USRSP_EN)},
+ /* Line in Rear */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, AC_PINCTL_VREF_50},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Front Mic pin: input vref at 80% */
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
/* Rear mixer */
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* HP Pin: output 0 (0x0c) */
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
- /* Internal Speakers: output 0 (0x0d) */
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* Mic (rear) pin: input vref at 80% */
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Front Mic pin: input vref at 80% */
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Line In pin: use output 1 when in LineOut mode */
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x1a, AC_VERB_SET_CONNECT_SEL, 0x01},
-
- /* FIXME: use matrix-type input source selection */
- /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
- /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
+ /* Line-Out mixer: unmute input/output amp left and right (volume = 0) */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* 0x24 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In */
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- /* Input mixer2 */
+ /* 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In */
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- /* Input mixer3 */
+ /* 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In */
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- /* ADC1: mute amp left and right */
+ /* 0x07 [Audio Input] wcaps 0x10011b: Stereo Amp-In */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* ADC2: mute amp left and right */
+ /* 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* ADC3: mute amp left and right */
+ /* 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In */
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
-
{ }
};
@@ -8118,7 +8117,7 @@
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x14;
- spec->autocfg.speaker_pins[0] = 0x15;
+ spec->autocfg.speaker_pins[0] = 0x18;
spec->autocfg.speaker_pins[1] = 0x1a;
}
@@ -9480,11 +9479,16 @@
SND_PCI_QUIRK(0x106b, 0x1000, "iMac 24", ALC885_IMAC24),
SND_PCI_QUIRK(0x106b, 0x2800, "AppleTV", ALC885_IMAC24),
SND_PCI_QUIRK(0x106b, 0x2c00, "MacbookPro rev3", ALC885_MBP3),
+ SND_PCI_QUIRK(0x106b, 0x3000, "iMac", ALC889A_MB31),
+ SND_PCI_QUIRK(0x106b, 0x3200, "iMac 7,1 Aluminum", ALC882_ASUS_A7M),
+ SND_PCI_QUIRK(0x106b, 0x3400, "MacBookAir 1,1", ALC885_MBP3),
+ SND_PCI_QUIRK(0x106b, 0x3500, "MacBookAir 2,1", ALC885_MBA21),
SND_PCI_QUIRK(0x106b, 0x3600, "Macbook 3,1", ALC889A_MB31),
SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC885_MBP3),
SND_PCI_QUIRK(0x106b, 0x3e00, "iMac 24 Aluminum", ALC885_IMAC24),
SND_PCI_QUIRK(0x106b, 0x4900, "iMac 9,1 Aluminum", ALC885_IMAC91),
SND_PCI_QUIRK(0x106b, 0x3f00, "Macbook 5,1", ALC885_MB5),
+ SND_PCI_QUIRK(0x106b, 0x4a00, "Macbook 5,2", ALC885_MB5),
/* FIXME: HP jack sense seems not working for MBP 5,1 or 5,2,
* so apparently no perfect solution yet
*/
@@ -9627,14 +9631,14 @@
.init_hook = alc885_imac24_init_hook,
},
[ALC885_IMAC91] = {
- .mixers = { alc885_imac91_mixer, alc882_chmode_mixer },
+ .mixers = {alc885_imac91_mixer},
.init_verbs = { alc885_imac91_init_verbs,
alc880_gpio1_init_verbs },
.num_dacs = ARRAY_SIZE(alc882_dac_nids),
.dac_nids = alc882_dac_nids,
- .channel_mode = alc885_mbp_4ch_modes,
- .num_channel_mode = ARRAY_SIZE(alc885_mbp_4ch_modes),
- .input_mux = &alc882_capture_source,
+ .channel_mode = alc885_mba21_ch_modes,
+ .num_channel_mode = ARRAY_SIZE(alc885_mba21_ch_modes),
+ .input_mux = &alc889A_imac91_capture_source,
.dig_out_nid = ALC882_DIGOUT_NID,
.dig_in_nid = ALC882_DIGIN_NID,
.unsol_event = alc_automute_amp_unsol_event,
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index a0e06d8..f1e7bab 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -2078,12 +2078,12 @@
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_INTEL, 0xff00, 0x2000,
"Intel D965", STAC_D965_3ST),
/* Dell 3 stack systems */
- SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f7, "Dell XPS M1730", STAC_DELL_3ST),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01dd, "Dell Dimension E520", STAC_DELL_3ST),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01ed, "Dell ", STAC_DELL_3ST),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f4, "Dell ", STAC_DELL_3ST),
/* Dell 3 stack systems with verb table in BIOS */
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f3, "Dell Inspiron 1420", STAC_DELL_BIOS),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f7, "Dell XPS M1730", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0227, "Dell Vostro 1400 ", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022e, "Dell ", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022f, "Dell Inspiron 1525", STAC_DELL_BIOS),
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 31ac553..5da30eb 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -83,8 +83,8 @@
config SND_SOC_WM_HUBS
tristate
- default y if SND_SOC_WM8993=y
- default m if SND_SOC_WM8993=m
+ default y if SND_SOC_WM8993=y || SND_SOC_WM8994=y
+ default m if SND_SOC_WM8993=m || SND_SOC_WM8994=m
config SND_SOC_AC97_CODEC
tristate
diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
index 8ae2020..0221ca7 100644
--- a/sound/soc/codecs/wm8350.c
+++ b/sound/soc/codecs/wm8350.c
@@ -426,8 +426,8 @@
SOC_ENUM_SINGLE(WM8350_INPUT_MIXER_VOLUME, 15, 2, wm8350_lr),
};
-static DECLARE_TLV_DB_LINEAR(pre_amp_tlv, -1200, 3525);
-static DECLARE_TLV_DB_LINEAR(out_pga_tlv, -5700, 600);
+static DECLARE_TLV_DB_SCALE(pre_amp_tlv, -1200, 3525, 0);
+static DECLARE_TLV_DB_SCALE(out_pga_tlv, -5700, 600, 0);
static DECLARE_TLV_DB_SCALE(dac_pcm_tlv, -7163, 36, 1);
static DECLARE_TLV_DB_SCALE(adc_pcm_tlv, -12700, 50, 1);
static DECLARE_TLV_DB_SCALE(out_mix_tlv, -1500, 300, 1);
diff --git a/sound/soc/codecs/wm8400.c b/sound/soc/codecs/wm8400.c
index 7f5d080..8f29406 100644
--- a/sound/soc/codecs/wm8400.c
+++ b/sound/soc/codecs/wm8400.c
@@ -107,21 +107,21 @@
wm8400_reset_codec_reg_cache(wm8400->wm8400);
}
-static const DECLARE_TLV_DB_LINEAR(rec_mix_tlv, -1500, 600);
+static const DECLARE_TLV_DB_SCALE(rec_mix_tlv, -1500, 600, 0);
-static const DECLARE_TLV_DB_LINEAR(in_pga_tlv, -1650, 3000);
+static const DECLARE_TLV_DB_SCALE(in_pga_tlv, -1650, 3000, 0);
-static const DECLARE_TLV_DB_LINEAR(out_mix_tlv, -2100, 0);
+static const DECLARE_TLV_DB_SCALE(out_mix_tlv, -2100, 0, 0);
-static const DECLARE_TLV_DB_LINEAR(out_pga_tlv, -7300, 600);
+static const DECLARE_TLV_DB_SCALE(out_pga_tlv, -7300, 600, 0);
-static const DECLARE_TLV_DB_LINEAR(out_omix_tlv, -600, 0);
+static const DECLARE_TLV_DB_SCALE(out_omix_tlv, -600, 0, 0);
-static const DECLARE_TLV_DB_LINEAR(out_dac_tlv, -7163, 0);
+static const DECLARE_TLV_DB_SCALE(out_dac_tlv, -7163, 0, 0);
-static const DECLARE_TLV_DB_LINEAR(in_adc_tlv, -7163, 1763);
+static const DECLARE_TLV_DB_SCALE(in_adc_tlv, -7163, 1763, 0);
-static const DECLARE_TLV_DB_LINEAR(out_sidetone_tlv, -3600, 0);
+static const DECLARE_TLV_DB_SCALE(out_sidetone_tlv, -3600, 0, 0);
static int wm8400_outpga_put_volsw_vu(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
@@ -440,7 +440,7 @@
/* INMIX dB values */
static const unsigned int in_mix_tlv[] = {
TLV_DB_RANGE_HEAD(1),
- 0,7, TLV_DB_LINEAR_ITEM(-1200, 600),
+ 0,7, TLV_DB_SCALE_ITEM(-1200, 600, 0),
};
/* Left In PGA Connections */
diff --git a/sound/soc/codecs/wm8727.c b/sound/soc/codecs/wm8727.c
index 1072621..9d1df26 100644
--- a/sound/soc/codecs/wm8727.c
+++ b/sound/soc/codecs/wm8727.c
@@ -127,6 +127,8 @@
goto err_codec;
}
+ return 0;
+
err_codec:
snd_soc_unregister_codec(codec);
err:
diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c
index 7e4a627..4e212ed 100644
--- a/sound/soc/codecs/wm8776.c
+++ b/sound/soc/codecs/wm8776.c
@@ -94,7 +94,6 @@
static const struct snd_soc_dapm_widget wm8776_dapm_widgets[] = {
SND_SOC_DAPM_INPUT("AUX"),
-SND_SOC_DAPM_INPUT("AUX"),
SND_SOC_DAPM_INPUT("AIN1"),
SND_SOC_DAPM_INPUT("AIN2"),
diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c
index 0417dae..19ad590 100644
--- a/sound/soc/codecs/wm8988.c
+++ b/sound/soc/codecs/wm8988.c
@@ -885,7 +885,6 @@
ret = snd_soc_register_dai(&wm8988_dai);
if (ret != 0) {
dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
- snd_soc_unregister_codec(codec);
goto err_codec;
}
diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index 7b536d9..c018772 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -111,21 +111,21 @@
#define wm8990_reset(c) snd_soc_write(c, WM8990_RESET, 0)
-static const DECLARE_TLV_DB_LINEAR(rec_mix_tlv, -1500, 600);
+static const DECLARE_TLV_DB_SCALE(rec_mix_tlv, -1500, 600, 0);
-static const DECLARE_TLV_DB_LINEAR(in_pga_tlv, -1650, 3000);
+static const DECLARE_TLV_DB_SCALE(in_pga_tlv, -1650, 3000, 0);
-static const DECLARE_TLV_DB_LINEAR(out_mix_tlv, 0, -2100);
+static const DECLARE_TLV_DB_SCALE(out_mix_tlv, 0, -2100, 0);
-static const DECLARE_TLV_DB_LINEAR(out_pga_tlv, -7300, 600);
+static const DECLARE_TLV_DB_SCALE(out_pga_tlv, -7300, 600, 0);
-static const DECLARE_TLV_DB_LINEAR(out_omix_tlv, -600, 0);
+static const DECLARE_TLV_DB_SCALE(out_omix_tlv, -600, 0, 0);
-static const DECLARE_TLV_DB_LINEAR(out_dac_tlv, -7163, 0);
+static const DECLARE_TLV_DB_SCALE(out_dac_tlv, -7163, 0, 0);
-static const DECLARE_TLV_DB_LINEAR(in_adc_tlv, -7163, 1763);
+static const DECLARE_TLV_DB_SCALE(in_adc_tlv, -7163, 1763, 0);
-static const DECLARE_TLV_DB_LINEAR(out_sidetone_tlv, -3600, 0);
+static const DECLARE_TLV_DB_SCALE(out_sidetone_tlv, -3600, 0, 0);
static int wm899x_outpga_put_volsw_vu(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
@@ -451,7 +451,7 @@
/* INMIX dB values */
static const unsigned int in_mix_tlv[] = {
TLV_DB_RANGE_HEAD(1),
- 0, 7, TLV_DB_LINEAR_ITEM(-1200, 600),
+ 0, 7, TLV_DB_SCALE_ITEM(-1200, 600, 0),
};
/* Left In PGA Connections */
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index 79f0f4a..d395509 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -612,7 +612,6 @@
NUMDMA_MASK);
mcasp_mod_bits(dev->base + DAVINCI_MCASP_WFIFOCTL,
((dev->txnumevt * tx_ser) << 8), NUMEVT_MASK);
- mcasp_set_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE);
}
if (dev->rxnumevt && stream == SNDRV_PCM_STREAM_CAPTURE) {
@@ -623,7 +622,6 @@
NUMDMA_MASK);
mcasp_mod_bits(dev->base + DAVINCI_MCASP_RFIFOCTL,
((dev->rxnumevt * rx_ser) << 8), NUMEVT_MASK);
- mcasp_set_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE);
}
}
diff --git a/sound/soc/fsl/mpc5200_dma.h b/sound/soc/fsl/mpc5200_dma.h
index 22208b3..e1ec6d9 100644
--- a/sound/soc/fsl/mpc5200_dma.h
+++ b/sound/soc/fsl/mpc5200_dma.h
@@ -73,7 +73,7 @@
};
/* Utility for retrieving psc_dma_stream structure from a substream */
-inline struct psc_dma_stream *
+static inline struct psc_dma_stream *
to_psc_dma_stream(struct snd_pcm_substream *substream, struct psc_dma *psc_dma)
{
if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig
index eba9b9d..252defe 100644
--- a/sound/soc/imx/Kconfig
+++ b/sound/soc/imx/Kconfig
@@ -13,9 +13,18 @@
config SND_MXC_SOC_WM1133_EV1
tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
- depends on SND_IMX_SOC && EXPERIMENTAL
+ depends on SND_IMX_SOC && MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
select SND_SOC_WM8350
select SND_MXC_SOC_SSI
help
Enable support for audio on the i.MX31ADS with the WM1133-EV1
PMIC board with WM8835x fitted.
+
+config SND_SOC_PHYCORE_AC97
+ tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards"
+ depends on MACH_PCM043 || MACH_PCA100
+ select SND_MXC_SOC_SSI
+ select SND_SOC_WM9712
+ help
+ Say Y if you want to add support for SoC audio on Phytec phyCORE
+ and phyCARD boards in AC97 mode
diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c
index 2b31ac6..05f19c9 100644
--- a/sound/soc/imx/imx-pcm-dma-mx2.c
+++ b/sound/soc/imx/imx-pcm-dma-mx2.c
@@ -73,7 +73,8 @@
{
struct snd_pcm_substream *substream = data;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct imx_pcm_dma_params *dma_params = rtd->dai->cpu_dai->dma_data;
+ struct imx_pcm_dma_params *dma_params =
+ snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);
struct snd_pcm_runtime *runtime = substream->runtime;
struct imx_pcm_runtime_data *iprtd = runtime->private_data;
int ret;
@@ -102,7 +103,7 @@
struct imx_pcm_runtime_data *iprtd = runtime->private_data;
int ret;
- dma_params = snd_soc_get_dma_data(rtd->dai->cpu_dai, substream);
+ dma_params = snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);
iprtd->dma = imx_dma_request_by_prio(DRV_NAME, DMA_PRIO_HIGH);
if (iprtd->dma < 0) {
@@ -212,7 +213,7 @@
struct imx_pcm_runtime_data *iprtd = runtime->private_data;
int err;
- dma_params = snd_soc_get_dma_data(rtd->dai->cpu_dai, substream);
+ dma_params = snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);
iprtd->substream = substream;
iprtd->buf = (unsigned int *)substream->dma_buffer.area;
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index 1941a35..d256f5f 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -328,38 +328,6 @@
.codec_dev = &soc_codec_dev_wm8750,
};
-/*
- * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
- * New drivers should register the wm8750 I2C device in the machine
- * setup code (under arch/arm for ARM systems).
- */
-static int wm8750_i2c_register(void)
-{
- struct i2c_board_info info;
- struct i2c_adapter *adapter;
- struct i2c_client *client;
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- info.addr = 0x1b;
- strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
-
- adapter = i2c_get_adapter(0);
- if (!adapter) {
- printk(KERN_ERR "can't get i2c adapter 0\n");
- return -ENODEV;
- }
-
- client = i2c_new_device(adapter, &info);
- i2c_put_adapter(adapter);
- if (!client) {
- printk(KERN_ERR "can't add i2c device at 0x%x\n",
- (unsigned int)info.addr);
- return -ENODEV;
- }
-
- return 0;
-}
-
static struct platform_device *spitz_snd_device;
static int __init spitz_init(void)
@@ -369,10 +337,6 @@
if (!(machine_is_spitz() || machine_is_borzoi() || machine_is_akita()))
return -ENODEV;
- ret = wm8750_i2c_setup();
- if (ret != 0)
- return ret;
-
spitz_snd_device = platform_device_alloc("soc-audio", -1);
if (!spitz_snd_device)
return -ENOMEM;
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index 3396a0d..ec4acac 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -683,20 +683,15 @@
/* clock inversion (CKG2) */
data = 0;
- switch (SH_FSI_INVERSION_MASK & flags) {
- case SH_FSI_LRM_INV:
- data = 1 << 12;
- break;
- case SH_FSI_BRM_INV:
- data = 1 << 8;
- break;
- case SH_FSI_LRS_INV:
- data = 1 << 4;
- break;
- case SH_FSI_BRS_INV:
- data = 1 << 0;
- break;
- }
+ if (SH_FSI_LRM_INV & flags)
+ data |= 1 << 12;
+ if (SH_FSI_BRM_INV & flags)
+ data |= 1 << 8;
+ if (SH_FSI_LRS_INV & flags)
+ data |= 1 << 4;
+ if (SH_FSI_BRS_INV & flags)
+ data |= 1 << 0;
+
fsi_reg_write(fsi, CKG2, data);
/* do fmt, di fmt */
@@ -726,15 +721,15 @@
break;
case SH_FSI_FMT_TDM:
msg = "TDM";
- data = CR_FMT(CR_TDM) | (fsi->chan - 1);
fsi->chan = is_play ?
SH_FSI_GET_CH_O(flags) : SH_FSI_GET_CH_I(flags);
+ data = CR_FMT(CR_TDM) | (fsi->chan - 1);
break;
case SH_FSI_FMT_TDM_DELAY:
msg = "TDM Delay";
- data = CR_FMT(CR_TDM_D) | (fsi->chan - 1);
fsi->chan = is_play ?
SH_FSI_GET_CH_O(flags) : SH_FSI_GET_CH_I(flags);
+ data = CR_FMT(CR_TDM_D) | (fsi->chan - 1);
break;
default:
dev_err(dai->dev, "unknown format.\n");
diff --git a/sound/soc/sh/siu_dai.c b/sound/soc/sh/siu_dai.c
index d86ee1b..eeed5ed 100644
--- a/sound/soc/sh/siu_dai.c
+++ b/sound/soc/sh/siu_dai.c
@@ -588,6 +588,8 @@
ret = siu_dai_spbstart(port_info);
if (ret < 0)
goto fail;
+ } else {
+ ret = 0;
}
port_info->play_cap |= self;
diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
index 4c7b051..1bc56b2 100644
--- a/sound/spi/at73c213.c
+++ b/sound/spi/at73c213.c
@@ -69,7 +69,6 @@
int irq;
int period;
unsigned long bitrate;
- struct clk *bitclk;
struct ssc_device *ssc;
struct spi_device *spi;
u8 spi_wbuffer[2];
diff --git a/sound/usb/Makefile b/sound/usb/Makefile
index e7ac7f4..1e362bf 100644
--- a/sound/usb/Makefile
+++ b/sound/usb/Makefile
@@ -11,7 +11,8 @@
endpoint.o \
urb.o \
pcm.o \
- helper.o
+ helper.o \
+ clock.o
snd-usbmidi-lib-objs := midi.o
diff --git a/sound/usb/caiaq/control.c b/sound/usb/caiaq/control.c
index 36ed703..91c804c 100644
--- a/sound/usb/caiaq/control.c
+++ b/sound/usb/caiaq/control.c
@@ -42,8 +42,9 @@
switch (dev->chip.usb_id) {
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ):
if (pos == 0) {
- /* current input mode of A8DJ */
+ /* current input mode of A8DJ and A4DJ */
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
uinfo->value.integer.min = 0;
uinfo->value.integer.max = 2;
@@ -51,16 +52,6 @@
}
break;
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ):
- if (pos == 0) {
- /* current input mode of A4DJ */
- uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = 1;
- return 0;
- }
- break;
-
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORKONTROLX1):
maxval = 127;
break;
@@ -86,14 +77,6 @@
struct snd_usb_caiaqdev *dev = caiaqdev(chip->card);
int pos = kcontrol->private_value;
- if (dev->chip.usb_id ==
- USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ)) {
- /* A4DJ has only one control */
- /* do not expose hardware input mode 0 */
- ucontrol->value.integer.value[0] = dev->control_state[0] - 1;
- return 0;
- }
-
if (pos & CNT_INTVAL)
ucontrol->value.integer.value[0]
= dev->control_state[pos & ~CNT_INTVAL];
@@ -112,20 +95,9 @@
int pos = kcontrol->private_value;
unsigned char cmd = EP1_CMD_WRITE_IO;
- switch (dev->chip.usb_id) {
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ): {
- /* A4DJ has only one control */
- /* do not expose hardware input mode 0 */
- dev->control_state[0] = ucontrol->value.integer.value[0] + 1;
- snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO,
- dev->control_state, sizeof(dev->control_state));
- return 1;
- }
-
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORKONTROLX1):
+ if (dev->chip.usb_id ==
+ USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORKONTROLX1))
cmd = EP1_CMD_DIMM_LEDS;
- break;
- }
if (pos & CNT_INTVAL) {
dev->control_state[pos & ~CNT_INTVAL]
diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c
index 80527182..cdfb856 100644
--- a/sound/usb/caiaq/device.c
+++ b/sound/usb/caiaq/device.c
@@ -36,7 +36,7 @@
#include "input.h"
MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.20");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.21");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
"{Native Instruments, RigKontrol3},"
@@ -320,12 +320,6 @@
}
break;
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ):
- /* Audio 4 DJ - default input mode to phono */
- dev->control_state[0] = 2;
- snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO,
- dev->control_state, 1);
- break;
}
if (dev->spec.num_analog_audio_out +
diff --git a/sound/usb/caiaq/input.c b/sound/usb/caiaq/input.c
index 8bbfbfd..dcb6207 100644
--- a/sound/usb/caiaq/input.c
+++ b/sound/usb/caiaq/input.c
@@ -171,7 +171,7 @@
input_report_abs(input_dev, ABS_HAT0Y, (buf[4] << 8) | buf[5]);
input_report_abs(input_dev, ABS_HAT1X, (buf[12] << 8) | buf[13]);
input_report_abs(input_dev, ABS_HAT1Y, (buf[2] << 8) | buf[3]);
- input_report_abs(input_dev, ABS_HAT2X, (buf[15] << 8) | buf[15]);
+ input_report_abs(input_dev, ABS_HAT2X, (buf[14] << 8) | buf[15]);
input_report_abs(input_dev, ABS_HAT2Y, (buf[0] << 8) | buf[1]);
input_report_abs(input_dev, ABS_HAT3X, (buf[10] << 8) | buf[11]);
input_report_abs(input_dev, ABS_HAT3Y, (buf[6] << 8) | buf[7]);
diff --git a/sound/usb/card.c b/sound/usb/card.c
index da1346b..7a8ac1d 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -236,7 +236,6 @@
}
case UAC_VERSION_2: {
- struct uac_clock_source_descriptor *cs;
struct usb_interface_assoc_descriptor *assoc =
usb_ifnum_to_if(dev, ctrlif)->intf_assoc;
@@ -245,21 +244,6 @@
return -EINVAL;
}
- /* FIXME: for now, we expect there is at least one clock source
- * descriptor and we always take the first one.
- * We should properly support devices with multiple clock sources,
- * clock selectors and sample rate conversion units. */
-
- cs = snd_usb_find_csint_desc(host_iface->extra, host_iface->extralen,
- NULL, UAC2_CLOCK_SOURCE);
-
- if (!cs) {
- snd_printk(KERN_ERR "CLOCK_SOURCE descriptor not found\n");
- return -EINVAL;
- }
-
- chip->clock_id = cs->bClockID;
-
for (i = 0; i < assoc->bInterfaceCount; i++) {
int intf = assoc->bFirstInterface + i;
@@ -481,6 +465,8 @@
goto __error;
}
+ chip->ctrl_intf = alts;
+
if (err > 0) {
/* create normal USB audio interfaces */
if (snd_usb_create_streams(chip, ifnum) < 0 ||
diff --git a/sound/usb/card.h b/sound/usb/card.h
index ed92420..1febf2f 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -25,6 +25,7 @@
unsigned int rate_min, rate_max; /* min/max rates */
unsigned int nr_rates; /* number of rate table entries */
unsigned int *rate_table; /* rate table */
+ unsigned char clock; /* associated clock */
};
struct snd_usb_substream;
diff --git a/sound/usb/clock.c b/sound/usb/clock.c
new file mode 100644
index 0000000..b585511
--- /dev/null
+++ b/sound/usb/clock.c
@@ -0,0 +1,315 @@
+/*
+ * Clock domain and sample rate management functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/bitops.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/usb.h>
+#include <linux/moduleparam.h>
+#include <linux/mutex.h>
+#include <linux/usb/audio.h>
+#include <linux/usb/audio-v2.h>
+
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+
+#include "usbaudio.h"
+#include "card.h"
+#include "midi.h"
+#include "mixer.h"
+#include "proc.h"
+#include "quirks.h"
+#include "endpoint.h"
+#include "helper.h"
+#include "debug.h"
+#include "pcm.h"
+#include "urb.h"
+#include "format.h"
+
+static struct uac_clock_source_descriptor *
+ snd_usb_find_clock_source(struct usb_host_interface *ctrl_iface,
+ int clock_id)
+{
+ struct uac_clock_source_descriptor *cs = NULL;
+
+ while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ cs, UAC2_CLOCK_SOURCE))) {
+ if (cs->bClockID == clock_id)
+ return cs;
+ }
+
+ return NULL;
+}
+
+static struct uac_clock_selector_descriptor *
+ snd_usb_find_clock_selector(struct usb_host_interface *ctrl_iface,
+ int clock_id)
+{
+ struct uac_clock_selector_descriptor *cs = NULL;
+
+ while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ cs, UAC2_CLOCK_SELECTOR))) {
+ if (cs->bClockID == clock_id)
+ return cs;
+ }
+
+ return NULL;
+}
+
+static struct uac_clock_multiplier_descriptor *
+ snd_usb_find_clock_multiplier(struct usb_host_interface *ctrl_iface,
+ int clock_id)
+{
+ struct uac_clock_multiplier_descriptor *cs = NULL;
+
+ while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ cs, UAC2_CLOCK_MULTIPLIER))) {
+ if (cs->bClockID == clock_id)
+ return cs;
+ }
+
+ return NULL;
+}
+
+static int uac_clock_selector_get_val(struct snd_usb_audio *chip, int selector_id)
+{
+ unsigned char buf;
+ int ret;
+
+ ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0),
+ UAC2_CS_CUR,
+ USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
+ UAC2_CX_CLOCK_SELECTOR << 8,
+ snd_usb_ctrl_intf(chip) | (selector_id << 8),
+ &buf, sizeof(buf), 1000);
+
+ if (ret < 0)
+ return ret;
+
+ return buf;
+}
+
+static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, int source_id)
+{
+ int err;
+ unsigned char data;
+ struct usb_device *dev = chip->dev;
+
+ err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ UAC2_CS_CONTROL_CLOCK_VALID << 8,
+ snd_usb_ctrl_intf(chip) | (source_id << 8),
+ &data, sizeof(data), 1000);
+
+ if (err < 0) {
+ snd_printk(KERN_WARNING "%s(): cannot get clock validity for id %d\n",
+ __func__, source_id);
+ return err;
+ }
+
+ return !!data;
+}
+
+/* Try to find the clock source ID of a given clock entity */
+
+static int __uac_clock_find_source(struct snd_usb_audio *chip,
+ struct usb_host_interface *host_iface,
+ int entity_id, unsigned long *visited)
+{
+ struct uac_clock_source_descriptor *source;
+ struct uac_clock_selector_descriptor *selector;
+ struct uac_clock_multiplier_descriptor *multiplier;
+
+ entity_id &= 0xff;
+
+ if (test_and_set_bit(entity_id, visited)) {
+ snd_printk(KERN_WARNING
+ "%s(): recursive clock topology detected, id %d.\n",
+ __func__, entity_id);
+ return -EINVAL;
+ }
+
+ /* first, see if the ID we're looking for is a clock source already */
+ source = snd_usb_find_clock_source(host_iface, entity_id);
+ if (source)
+ return source->bClockID;
+
+ selector = snd_usb_find_clock_selector(host_iface, entity_id);
+ if (selector) {
+ int ret;
+
+ /* the entity ID we are looking for is a selector.
+ * find out what it currently selects */
+ ret = uac_clock_selector_get_val(chip, selector->bClockID);
+ if (ret < 0)
+ return ret;
+
+ if (ret > selector->bNrInPins || ret < 1) {
+ printk(KERN_ERR
+ "%s(): selector reported illegal value, id %d, ret %d\n",
+ __func__, selector->bClockID, ret);
+
+ return -EINVAL;
+ }
+
+ return __uac_clock_find_source(chip, host_iface,
+ selector->baCSourceID[ret-1],
+ visited);
+ }
+
+ /* FIXME: multipliers only act as pass-thru element for now */
+ multiplier = snd_usb_find_clock_multiplier(host_iface, entity_id);
+ if (multiplier)
+ return __uac_clock_find_source(chip, host_iface,
+ multiplier->bCSourceID, visited);
+
+ return -EINVAL;
+}
+
+int snd_usb_clock_find_source(struct snd_usb_audio *chip,
+ struct usb_host_interface *host_iface,
+ int entity_id)
+{
+ DECLARE_BITMAP(visited, 256);
+ memset(visited, 0, sizeof(visited));
+ return __uac_clock_find_source(chip, host_iface, entity_id, visited);
+}
+
+static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
+ struct usb_host_interface *alts,
+ struct audioformat *fmt, int rate)
+{
+ struct usb_device *dev = chip->dev;
+ unsigned int ep;
+ unsigned char data[3];
+ int err, crate;
+
+ ep = get_endpoint(alts, 0)->bEndpointAddress;
+
+ /* if endpoint doesn't have sampling rate control, bail out */
+ if (!(fmt->attributes & UAC_EP_CS_ATTR_SAMPLE_RATE)) {
+ snd_printk(KERN_WARNING "%d:%d:%d: endpoint lacks sample rate attribute bit, cannot set.\n",
+ dev->devnum, iface, fmt->altsetting);
+ return 0;
+ }
+
+ data[0] = rate;
+ data[1] = rate >> 8;
+ data[2] = rate >> 16;
+ if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
+ USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+ UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
+ data, sizeof(data), 1000)) < 0) {
+ snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep %#x\n",
+ dev->devnum, iface, fmt->altsetting, rate, ep);
+ return err;
+ }
+
+ if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR,
+ USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN,
+ UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
+ data, sizeof(data), 1000)) < 0) {
+ snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep %#x\n",
+ dev->devnum, iface, fmt->altsetting, ep);
+ return 0; /* some devices don't support reading */
+ }
+
+ crate = data[0] | (data[1] << 8) | (data[2] << 16);
+ if (crate != rate) {
+ snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
+ // runtime->rate = crate;
+ }
+
+ return 0;
+}
+
+static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
+ struct usb_host_interface *alts,
+ struct audioformat *fmt, int rate)
+{
+ struct usb_device *dev = chip->dev;
+ unsigned char data[4];
+ int err, crate;
+ int clock = snd_usb_clock_find_source(chip, chip->ctrl_intf, fmt->clock);
+
+ if (clock < 0)
+ return clock;
+
+ if (!uac_clock_source_is_valid(chip, clock)) {
+ snd_printk(KERN_ERR "%d:%d:%d: clock source %d is not valid, cannot use\n",
+ dev->devnum, iface, fmt->altsetting, clock);
+ return -ENXIO;
+ }
+
+ data[0] = rate;
+ data[1] = rate >> 8;
+ data[2] = rate >> 16;
+ data[3] = rate >> 24;
+ if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC2_CS_CUR,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ UAC2_CS_CONTROL_SAM_FREQ << 8,
+ snd_usb_ctrl_intf(chip) | (clock << 8),
+ data, sizeof(data), 1000)) < 0) {
+ snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2)\n",
+ dev->devnum, iface, fmt->altsetting, rate);
+ return err;
+ }
+
+ if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ UAC2_CS_CONTROL_SAM_FREQ << 8,
+ snd_usb_ctrl_intf(chip) | (clock << 8),
+ data, sizeof(data), 1000)) < 0) {
+ snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
+ dev->devnum, iface, fmt->altsetting);
+ return err;
+ }
+
+ crate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
+ if (crate != rate)
+ snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
+
+ return 0;
+}
+
+int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
+ struct usb_host_interface *alts,
+ struct audioformat *fmt, int rate)
+{
+ struct usb_interface_descriptor *altsd = get_iface_desc(alts);
+
+ switch (altsd->bInterfaceProtocol) {
+ case UAC_VERSION_1:
+ return set_sample_rate_v1(chip, iface, alts, fmt, rate);
+
+ case UAC_VERSION_2:
+ return set_sample_rate_v2(chip, iface, alts, fmt, rate);
+ }
+
+ return -EINVAL;
+}
+
diff --git a/sound/usb/clock.h b/sound/usb/clock.h
new file mode 100644
index 0000000..beb2536
--- /dev/null
+++ b/sound/usb/clock.h
@@ -0,0 +1,12 @@
+#ifndef __USBAUDIO_CLOCK_H
+#define __USBAUDIO_CLOCK_H
+
+int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
+ struct usb_host_interface *alts,
+ struct audioformat *fmt, int rate);
+
+int snd_usb_clock_find_source(struct snd_usb_audio *chip,
+ struct usb_host_interface *host_iface,
+ int entity_id);
+
+#endif /* __USBAUDIO_CLOCK_H */
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index ef07a6d..6f6596c 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -149,6 +149,79 @@
return 0;
}
+static int parse_uac_endpoint_attributes(struct snd_usb_audio *chip,
+ struct usb_host_interface *alts,
+ int protocol, int iface_no)
+{
+ /* parsed with a v1 header here. that's ok as we only look at the
+ * header first which is the same for both versions */
+ struct uac_iso_endpoint_descriptor *csep;
+ struct usb_interface_descriptor *altsd = get_iface_desc(alts);
+ int attributes = 0;
+
+ csep = snd_usb_find_desc(alts->endpoint[0].extra, alts->endpoint[0].extralen, NULL, USB_DT_CS_ENDPOINT);
+
+ /* Creamware Noah has this descriptor after the 2nd endpoint */
+ if (!csep && altsd->bNumEndpoints >= 2)
+ csep = snd_usb_find_desc(alts->endpoint[1].extra, alts->endpoint[1].extralen, NULL, USB_DT_CS_ENDPOINT);
+
+ if (!csep || csep->bLength < 7 ||
+ csep->bDescriptorSubtype != UAC_EP_GENERAL) {
+ snd_printk(KERN_WARNING "%d:%u:%d : no or invalid"
+ " class specific endpoint descriptor\n",
+ chip->dev->devnum, iface_no,
+ altsd->bAlternateSetting);
+ return 0;
+ }
+
+ if (protocol == UAC_VERSION_1) {
+ attributes = csep->bmAttributes;
+ } else {
+ struct uac2_iso_endpoint_descriptor *csep2 =
+ (struct uac2_iso_endpoint_descriptor *) csep;
+
+ attributes = csep->bmAttributes & UAC_EP_CS_ATTR_FILL_MAX;
+
+ /* emulate the endpoint attributes of a v1 device */
+ if (csep2->bmControls & UAC2_CONTROL_PITCH)
+ attributes |= UAC_EP_CS_ATTR_PITCH_CONTROL;
+ }
+
+ return attributes;
+}
+
+static struct uac2_input_terminal_descriptor *
+ snd_usb_find_input_terminal_descriptor(struct usb_host_interface *ctrl_iface,
+ int terminal_id)
+{
+ struct uac2_input_terminal_descriptor *term = NULL;
+
+ while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ term, UAC_INPUT_TERMINAL))) {
+ if (term->bTerminalID == terminal_id)
+ return term;
+ }
+
+ return NULL;
+}
+
+static struct uac2_output_terminal_descriptor *
+ snd_usb_find_output_terminal_descriptor(struct usb_host_interface *ctrl_iface,
+ int terminal_id)
+{
+ struct uac2_output_terminal_descriptor *term = NULL;
+
+ while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ term, UAC_OUTPUT_TERMINAL))) {
+ if (term->bTerminalID == terminal_id)
+ return term;
+ }
+
+ return NULL;
+}
+
int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
{
struct usb_device *dev;
@@ -158,8 +231,8 @@
int i, altno, err, stream;
int format = 0, num_channels = 0;
struct audioformat *fp = NULL;
- unsigned char *fmt, *csep;
- int num, protocol;
+ int num, protocol, clock = 0;
+ struct uac_format_type_i_continuous_descriptor *fmt;
dev = chip->dev;
@@ -222,6 +295,8 @@
}
case UAC_VERSION_2: {
+ struct uac2_input_terminal_descriptor *input_term;
+ struct uac2_output_terminal_descriptor *output_term;
struct uac_as_header_descriptor_v2 *as =
snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
@@ -240,7 +315,25 @@
num_channels = as->bNrChannels;
format = le32_to_cpu(as->bmFormats);
- break;
+ /* lookup the terminal associated to this interface
+ * to extract the clock */
+ input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
+ as->bTerminalLink);
+ if (input_term) {
+ clock = input_term->bCSourceID;
+ break;
+ }
+
+ output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf,
+ as->bTerminalLink);
+ if (output_term) {
+ clock = output_term->bCSourceID;
+ break;
+ }
+
+ snd_printk(KERN_ERR "%d:%u:%d : bogus bTerminalLink %d\n",
+ dev->devnum, iface_no, altno, as->bTerminalLink);
+ continue;
}
default:
@@ -256,8 +349,8 @@
dev->devnum, iface_no, altno);
continue;
}
- if (((protocol == UAC_VERSION_1) && (fmt[0] < 8)) ||
- ((protocol == UAC_VERSION_2) && (fmt[0] != 6))) {
+ if (((protocol == UAC_VERSION_1) && (fmt->bLength < 8)) ||
+ ((protocol == UAC_VERSION_2) && (fmt->bLength != 6))) {
snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_FORMAT_TYPE desc\n",
dev->devnum, iface_no, altno);
continue;
@@ -268,7 +361,9 @@
* with the previous one, except for a larger packet size, but
* is actually a mislabeled two-channel setting; ignore it.
*/
- if (fmt[4] == 1 && fmt[5] == 2 && altno == 2 && num == 3 &&
+ if (fmt->bNrChannels == 1 &&
+ fmt->bSubframeSize == 2 &&
+ altno == 2 && num == 3 &&
fp && fp->altsetting == 1 && fp->channels == 1 &&
fp->formats == SNDRV_PCM_FMTBIT_S16_LE &&
protocol == UAC_VERSION_1 &&
@@ -276,17 +371,6 @@
fp->maxpacksize * 2)
continue;
- csep = snd_usb_find_desc(alts->endpoint[0].extra, alts->endpoint[0].extralen, NULL, USB_DT_CS_ENDPOINT);
- /* Creamware Noah has this descriptor after the 2nd endpoint */
- if (!csep && altsd->bNumEndpoints >= 2)
- csep = snd_usb_find_desc(alts->endpoint[1].extra, alts->endpoint[1].extralen, NULL, USB_DT_CS_ENDPOINT);
- if (!csep || csep[0] < 7 || csep[2] != UAC_EP_GENERAL) {
- snd_printk(KERN_WARNING "%d:%u:%d : no or invalid"
- " class specific endpoint descriptor\n",
- dev->devnum, iface_no, altno);
- csep = NULL;
- }
-
fp = kzalloc(sizeof(*fp), GFP_KERNEL);
if (! fp) {
snd_printk(KERN_ERR "cannot malloc\n");
@@ -305,7 +389,8 @@
if (snd_usb_get_speed(dev) == USB_SPEED_HIGH)
fp->maxpacksize = (((fp->maxpacksize >> 11) & 3) + 1)
* (fp->maxpacksize & 0x7ff);
- fp->attributes = csep ? csep[3] : 0;
+ fp->attributes = parse_uac_endpoint_attributes(chip, alts, protocol, iface_no);
+ fp->clock = clock;
/* some quirks for attributes here */
@@ -342,6 +427,7 @@
if (snd_usb_parse_audio_format(chip, fp, format, fmt, stream, alts) < 0) {
kfree(fp->rate_table);
kfree(fp);
+ fp = NULL;
continue;
}
diff --git a/sound/usb/format.c b/sound/usb/format.c
index b87cf87..30364ab 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -29,6 +29,7 @@
#include "quirks.h"
#include "helper.h"
#include "debug.h"
+#include "clock.h"
/*
* parse the audio format type I descriptor
@@ -205,6 +206,60 @@
}
/*
+ * Helper function to walk the array of sample rate triplets reported by
+ * the device. The problem is that we need to parse whole array first to
+ * get to know how many sample rates we have to expect.
+ * Then fp->rate_table can be allocated and filled.
+ */
+static int parse_uac2_sample_rate_range(struct audioformat *fp, int nr_triplets,
+ const unsigned char *data)
+{
+ int i, nr_rates = 0;
+
+ fp->rates = fp->rate_min = fp->rate_max = 0;
+
+ for (i = 0; i < nr_triplets; i++) {
+ int min = combine_quad(&data[2 + 12 * i]);
+ int max = combine_quad(&data[6 + 12 * i]);
+ int res = combine_quad(&data[10 + 12 * i]);
+ int rate;
+
+ if ((max < 0) || (min < 0) || (res < 0) || (max < min))
+ continue;
+
+ /*
+ * for ranges with res == 1, we announce a continuous sample
+ * rate range, and this function should return 0 for no further
+ * parsing.
+ */
+ if (res == 1) {
+ fp->rate_min = min;
+ fp->rate_max = max;
+ fp->rates = SNDRV_PCM_RATE_CONTINUOUS;
+ return 0;
+ }
+
+ for (rate = min; rate <= max; rate += res) {
+ if (fp->rate_table)
+ fp->rate_table[nr_rates] = rate;
+ if (!fp->rate_min || rate < fp->rate_min)
+ fp->rate_min = rate;
+ if (!fp->rate_max || rate > fp->rate_max)
+ fp->rate_max = rate;
+ fp->rates |= snd_pcm_rate_to_rate_bit(rate);
+
+ nr_rates++;
+
+ /* avoid endless loop */
+ if (res == 0)
+ break;
+ }
+ }
+
+ return nr_rates;
+}
+
+/*
* parse the format descriptor and stores the possible sample rates
* on the audioformat table (audio class v2).
*/
@@ -214,21 +269,30 @@
{
struct usb_device *dev = chip->dev;
unsigned char tmp[2], *data;
- int i, nr_rates, data_size, ret = 0;
+ int nr_triplets, data_size, ret = 0;
+ int clock = snd_usb_clock_find_source(chip, chip->ctrl_intf, fp->clock);
+
+ if (clock < 0) {
+ snd_printk(KERN_ERR "%s(): unable to find clock source (clock %d)\n",
+ __func__, clock);
+ goto err;
+ }
/* get the number of sample rates first by only fetching 2 bytes */
ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
- UAC2_CS_CONTROL_SAM_FREQ << 8, chip->clock_id << 8,
+ UAC2_CS_CONTROL_SAM_FREQ << 8,
+ snd_usb_ctrl_intf(chip) | (clock << 8),
tmp, sizeof(tmp), 1000);
if (ret < 0) {
- snd_printk(KERN_ERR "unable to retrieve number of sample rates\n");
+ snd_printk(KERN_ERR "%s(): unable to retrieve number of sample rates (clock %d)\n",
+ __func__, clock);
goto err;
}
- nr_rates = (tmp[1] << 8) | tmp[0];
- data_size = 2 + 12 * nr_rates;
+ nr_triplets = (tmp[1] << 8) | tmp[0];
+ data_size = 2 + 12 * nr_triplets;
data = kzalloc(data_size, GFP_KERNEL);
if (!data) {
ret = -ENOMEM;
@@ -237,36 +301,40 @@
/* now get the full information */
ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
- USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
- UAC2_CS_CONTROL_SAM_FREQ << 8, chip->clock_id << 8,
- data, data_size, 1000);
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ UAC2_CS_CONTROL_SAM_FREQ << 8,
+ snd_usb_ctrl_intf(chip) | (clock << 8),
+ data, data_size, 1000);
if (ret < 0) {
- snd_printk(KERN_ERR "unable to retrieve sample rate range\n");
+ snd_printk(KERN_ERR "%s(): unable to retrieve sample rate range (clock %d)\n",
+ __func__, clock);
ret = -EINVAL;
goto err_free;
}
- fp->rate_table = kmalloc(sizeof(int) * nr_rates, GFP_KERNEL);
+ /* Call the triplet parser, and make sure fp->rate_table is NULL.
+ * We just use the return value to know how many sample rates we
+ * will have to deal with. */
+ kfree(fp->rate_table);
+ fp->rate_table = NULL;
+ fp->nr_rates = parse_uac2_sample_rate_range(fp, nr_triplets, data);
+
+ if (fp->nr_rates == 0) {
+ /* SNDRV_PCM_RATE_CONTINUOUS */
+ ret = 0;
+ goto err_free;
+ }
+
+ fp->rate_table = kmalloc(sizeof(int) * fp->nr_rates, GFP_KERNEL);
if (!fp->rate_table) {
ret = -ENOMEM;
goto err_free;
}
- fp->nr_rates = 0;
- fp->rate_min = fp->rate_max = 0;
-
- for (i = 0; i < nr_rates; i++) {
- int rate = combine_quad(&data[2 + 12 * i]);
-
- fp->rate_table[fp->nr_rates] = rate;
- if (!fp->rate_min || rate < fp->rate_min)
- fp->rate_min = rate;
- if (!fp->rate_max || rate > fp->rate_max)
- fp->rate_max = rate;
- fp->rates |= snd_pcm_rate_to_rate_bit(rate);
- fp->nr_rates++;
- }
+ /* Call the triplet parser again, but this time, fp->rate_table is
+ * allocated, so the rates will be stored */
+ parse_uac2_sample_rate_range(fp, nr_triplets, data);
err_free:
kfree(data);
@@ -278,12 +346,11 @@
* parse the format type I and III descriptors
*/
static int parse_audio_format_i(struct snd_usb_audio *chip,
- struct audioformat *fp,
- int format, void *_fmt,
+ struct audioformat *fp, int format,
+ struct uac_format_type_i_continuous_descriptor *fmt,
struct usb_host_interface *iface)
{
struct usb_interface_descriptor *altsd = get_iface_desc(iface);
- struct uac_format_type_i_discrete_descriptor *fmt = _fmt;
int protocol = altsd->bInterfaceProtocol;
int pcm_format, ret;
@@ -320,7 +387,7 @@
switch (protocol) {
case UAC_VERSION_1:
fp->channels = fmt->bNrChannels;
- ret = parse_audio_format_rates_v1(chip, fp, _fmt, 7);
+ ret = parse_audio_format_rates_v1(chip, fp, (unsigned char *) fmt, 7);
break;
case UAC_VERSION_2:
/* fp->channels is already set in this case */
@@ -392,12 +459,12 @@
}
int snd_usb_parse_audio_format(struct snd_usb_audio *chip, struct audioformat *fp,
- int format, unsigned char *fmt, int stream,
- struct usb_host_interface *iface)
+ int format, struct uac_format_type_i_continuous_descriptor *fmt,
+ int stream, struct usb_host_interface *iface)
{
int err;
- switch (fmt[3]) {
+ switch (fmt->bFormatType) {
case UAC_FORMAT_TYPE_I:
case UAC_FORMAT_TYPE_III:
err = parse_audio_format_i(chip, fp, format, fmt, iface);
@@ -407,10 +474,11 @@
break;
default:
snd_printd(KERN_INFO "%d:%u:%d : format type %d is not supported yet\n",
- chip->dev->devnum, fp->iface, fp->altsetting, fmt[3]);
- return -1;
+ chip->dev->devnum, fp->iface, fp->altsetting,
+ fmt->bFormatType);
+ return -ENOTSUPP;
}
- fp->fmt_type = fmt[3];
+ fp->fmt_type = fmt->bFormatType;
if (err < 0)
return err;
#if 1
@@ -421,10 +489,10 @@
if (chip->usb_id == USB_ID(0x041e, 0x3000) ||
chip->usb_id == USB_ID(0x041e, 0x3020) ||
chip->usb_id == USB_ID(0x041e, 0x3061)) {
- if (fmt[3] == UAC_FORMAT_TYPE_I &&
+ if (fmt->bFormatType == UAC_FORMAT_TYPE_I &&
fp->rates != SNDRV_PCM_RATE_48000 &&
fp->rates != SNDRV_PCM_RATE_96000)
- return -1;
+ return -ENOTSUPP;
}
#endif
return 0;
diff --git a/sound/usb/format.h b/sound/usb/format.h
index 8298c4e..387924f 100644
--- a/sound/usb/format.h
+++ b/sound/usb/format.h
@@ -1,8 +1,9 @@
#ifndef __USBAUDIO_FORMAT_H
#define __USBAUDIO_FORMAT_H
-int snd_usb_parse_audio_format(struct snd_usb_audio *chip, struct audioformat *fp,
- int format, unsigned char *fmt, int stream,
- struct usb_host_interface *iface);
+int snd_usb_parse_audio_format(struct snd_usb_audio *chip,
+ struct audioformat *fp, int format,
+ struct uac_format_type_i_continuous_descriptor *fmt,
+ int stream, struct usb_host_interface *iface);
#endif /* __USBAUDIO_FORMAT_H */
diff --git a/sound/usb/helper.h b/sound/usb/helper.h
index a6b0e51..09bd943 100644
--- a/sound/usb/helper.h
+++ b/sound/usb/helper.h
@@ -28,5 +28,9 @@
#define snd_usb_get_speed(dev) ((dev)->speed)
#endif
+static inline int snd_usb_ctrl_intf(struct snd_usb_audio *chip)
+{
+ return get_iface_desc(chip->ctrl_intf)->bInterfaceNumber;
+}
#endif /* __USBAUDIO_HELPER_H */
diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index 8b1e4b1..4678564 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -645,6 +645,105 @@
};
/*
+ * AKAI MPD16 protocol:
+ *
+ * For control port (endpoint 1):
+ * ==============================
+ * One or more chunks consisting of first byte of (0x10 | msg_len) and then a
+ * SysEx message (msg_len=9 bytes long).
+ *
+ * For data port (endpoint 2):
+ * ===========================
+ * One or more chunks consisting of first byte of (0x20 | msg_len) and then a
+ * MIDI message (msg_len bytes long)
+ *
+ * Messages sent: Active Sense, Note On, Poly Pressure, Control Change.
+ */
+static void snd_usbmidi_akai_input(struct snd_usb_midi_in_endpoint *ep,
+ uint8_t *buffer, int buffer_length)
+{
+ unsigned int pos = 0;
+ unsigned int len = (unsigned int)buffer_length;
+ while (pos < len) {
+ unsigned int port = (buffer[pos] >> 4) - 1;
+ unsigned int msg_len = buffer[pos] & 0x0f;
+ pos++;
+ if (pos + msg_len <= len && port < 2)
+ snd_usbmidi_input_data(ep, 0, &buffer[pos], msg_len);
+ pos += msg_len;
+ }
+}
+
+#define MAX_AKAI_SYSEX_LEN 9
+
+static void snd_usbmidi_akai_output(struct snd_usb_midi_out_endpoint *ep,
+ struct urb *urb)
+{
+ uint8_t *msg;
+ int pos, end, count, buf_end;
+ uint8_t tmp[MAX_AKAI_SYSEX_LEN];
+ struct snd_rawmidi_substream *substream = ep->ports[0].substream;
+
+ if (!ep->ports[0].active)
+ return;
+
+ msg = urb->transfer_buffer + urb->transfer_buffer_length;
+ buf_end = ep->max_transfer - MAX_AKAI_SYSEX_LEN - 1;
+
+ /* only try adding more data when there's space for at least 1 SysEx */
+ while (urb->transfer_buffer_length < buf_end) {
+ count = snd_rawmidi_transmit_peek(substream,
+ tmp, MAX_AKAI_SYSEX_LEN);
+ if (!count) {
+ ep->ports[0].active = 0;
+ return;
+ }
+ /* try to skip non-SysEx data */
+ for (pos = 0; pos < count && tmp[pos] != 0xF0; pos++)
+ ;
+
+ if (pos > 0) {
+ snd_rawmidi_transmit_ack(substream, pos);
+ continue;
+ }
+
+ /* look for the start or end marker */
+ for (end = 1; end < count && tmp[end] < 0xF0; end++)
+ ;
+
+ /* next SysEx started before the end of current one */
+ if (end < count && tmp[end] == 0xF0) {
+ /* it's incomplete - drop it */
+ snd_rawmidi_transmit_ack(substream, end);
+ continue;
+ }
+ /* SysEx complete */
+ if (end < count && tmp[end] == 0xF7) {
+ /* queue it, ack it, and get the next one */
+ count = end + 1;
+ msg[0] = 0x10 | count;
+ memcpy(&msg[1], tmp, count);
+ snd_rawmidi_transmit_ack(substream, count);
+ urb->transfer_buffer_length += count + 1;
+ msg += count + 1;
+ continue;
+ }
+ /* less than 9 bytes and no end byte - wait for more */
+ if (count < MAX_AKAI_SYSEX_LEN) {
+ ep->ports[0].active = 0;
+ return;
+ }
+ /* 9 bytes and no end marker in sight - malformed, skip it */
+ snd_rawmidi_transmit_ack(substream, count);
+ }
+}
+
+static struct usb_protocol_ops snd_usbmidi_akai_ops = {
+ .input = snd_usbmidi_akai_input,
+ .output = snd_usbmidi_akai_output,
+};
+
+/*
* Novation USB MIDI protocol: number of data bytes is in the first byte
* (when receiving) (+1!) or in the second byte (when sending); data begins
* at the third byte.
@@ -1434,6 +1533,11 @@
EXTERNAL_PORT(0x086a, 0x0001, 8, "%s Broadcast"),
EXTERNAL_PORT(0x086a, 0x0002, 8, "%s Broadcast"),
EXTERNAL_PORT(0x086a, 0x0003, 4, "%s Broadcast"),
+ /* Akai MPD16 */
+ CONTROL_PORT(0x09e8, 0x0062, 0, "%s Control"),
+ PORT_INFO(0x09e8, 0x0062, 1, "%s MIDI", 0,
+ SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC |
+ SNDRV_SEQ_PORT_TYPE_HARDWARE),
/* Access Music Virus TI */
EXTERNAL_PORT(0x133e, 0x0815, 0, "%s MIDI"),
PORT_INFO(0x133e, 0x0815, 1, "%s Synth", 0,
@@ -2035,6 +2139,12 @@
umidi->usb_protocol_ops = &snd_usbmidi_cme_ops;
err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
break;
+ case QUIRK_MIDI_AKAI:
+ umidi->usb_protocol_ops = &snd_usbmidi_akai_ops;
+ err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
+ /* endpoint 1 is input-only */
+ endpoints[1].out_cables = 0;
+ break;
default:
snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type);
err = -ENXIO;
diff --git a/sound/usb/midi.h b/sound/usb/midi.h
index 2089ec9..2fca80b 100644
--- a/sound/usb/midi.h
+++ b/sound/usb/midi.h
@@ -37,6 +37,8 @@
/* for QUIRK_MIDI_CME, data is NULL */
+/* for QUIRK_MIDI_AKAI, data is NULL */
+
int snd_usbmidi_create(struct snd_card *card,
struct usb_interface *iface,
struct list_head *midi_list,
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 97dd176..736d134 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -78,39 +78,6 @@
USB_MIXER_U16,
};
-enum {
- USB_PROC_UPDOWN = 1,
- USB_PROC_UPDOWN_SWITCH = 1,
- USB_PROC_UPDOWN_MODE_SEL = 2,
-
- USB_PROC_PROLOGIC = 2,
- USB_PROC_PROLOGIC_SWITCH = 1,
- USB_PROC_PROLOGIC_MODE_SEL = 2,
-
- USB_PROC_3DENH = 3,
- USB_PROC_3DENH_SWITCH = 1,
- USB_PROC_3DENH_SPACE = 2,
-
- USB_PROC_REVERB = 4,
- USB_PROC_REVERB_SWITCH = 1,
- USB_PROC_REVERB_LEVEL = 2,
- USB_PROC_REVERB_TIME = 3,
- USB_PROC_REVERB_DELAY = 4,
-
- USB_PROC_CHORUS = 5,
- USB_PROC_CHORUS_SWITCH = 1,
- USB_PROC_CHORUS_LEVEL = 2,
- USB_PROC_CHORUS_RATE = 3,
- USB_PROC_CHORUS_DEPTH = 4,
-
- USB_PROC_DCR = 6,
- USB_PROC_DCR_SWITCH = 1,
- USB_PROC_DCR_RATIO = 2,
- USB_PROC_DCR_MAX_AMP = 3,
- USB_PROC_DCR_THRESHOLD = 4,
- USB_PROC_DCR_ATTACK = 5,
- USB_PROC_DCR_RELEASE = 6,
-};
/*E-mu 0202(0404) eXtension Unit(XU) control*/
enum {
@@ -198,22 +165,24 @@
/*
* find an audio control unit with the given unit id
- * this doesn't return any clock related units, so they need to be handled elsewhere
*/
static void *find_audio_control_unit(struct mixer_build *state, unsigned char unit)
{
- unsigned char *p;
+ /* we just parse the header */
+ struct uac_feature_unit_descriptor *hdr = NULL;
- p = NULL;
- while ((p = snd_usb_find_desc(state->buffer, state->buflen, p,
- USB_DT_CS_INTERFACE)) != NULL) {
- if (p[0] >= 4 && p[2] >= UAC_INPUT_TERMINAL && p[2] <= UAC2_EXTENSION_UNIT_V2 && p[3] == unit)
- return p;
+ while ((hdr = snd_usb_find_desc(state->buffer, state->buflen, hdr,
+ USB_DT_CS_INTERFACE)) != NULL) {
+ if (hdr->bLength >= 4 &&
+ hdr->bDescriptorSubtype >= UAC_INPUT_TERMINAL &&
+ hdr->bDescriptorSubtype <= UAC2_SAMPLE_RATE_CONVERTER &&
+ hdr->bUnitID == unit)
+ return hdr;
}
+
return NULL;
}
-
/*
* copy a string with the given id
*/
@@ -328,27 +297,36 @@
static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int validx, int *value_ret)
{
- unsigned char buf[14]; /* enough space for one range of 4 bytes */
+ unsigned char buf[2 + 3*sizeof(__u16)]; /* enough space for one range */
unsigned char *val;
- int ret;
+ int ret, size;
__u8 bRequest;
- bRequest = (request == UAC_GET_CUR) ?
- UAC2_CS_CUR : UAC2_CS_RANGE;
+ if (request == UAC_GET_CUR) {
+ bRequest = UAC2_CS_CUR;
+ size = sizeof(__u16);
+ } else {
+ bRequest = UAC2_CS_RANGE;
+ size = sizeof(buf);
+ }
+
+ memset(buf, 0, sizeof(buf));
ret = snd_usb_ctl_msg(cval->mixer->chip->dev,
usb_rcvctrlpipe(cval->mixer->chip->dev, 0),
bRequest,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
validx, cval->mixer->ctrlif | (cval->id << 8),
- buf, sizeof(buf), 1000);
+ buf, size, 1000);
if (ret < 0) {
- snd_printdd(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
- request, validx, cval->mixer->ctrlif | (cval->id << 8), cval->val_type);
+ snd_printk(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
+ request, validx, cval->mixer->ctrlif | (cval->id << 8), cval->val_type);
return ret;
}
+ /* FIXME: how should we handle multiple triplets here? */
+
switch (request) {
case UAC_GET_CUR:
val = buf;
@@ -462,6 +440,16 @@
int index, int value)
{
int err;
+ unsigned int read_only = (channel == 0) ?
+ cval->master_readonly :
+ cval->ch_readonly & (1 << (channel - 1));
+
+ if (read_only) {
+ snd_printdd(KERN_INFO "%s(): channel %d of control %d is read_only\n",
+ __func__, channel, cval->control);
+ return 0;
+ }
+
err = snd_usb_mixer_set_ctl_value(cval, UAC_SET_CUR, (cval->control << 8) | channel,
value);
if (err < 0)
@@ -631,6 +619,7 @@
*/
static int check_input_term(struct mixer_build *state, int id, struct usb_audio_term *term)
{
+ int err;
void *p1;
memset(term, 0, sizeof(*term));
@@ -651,6 +640,11 @@
term->channels = d->bNrChannels;
term->chconfig = le32_to_cpu(d->bmChannelConfig);
term->name = d->iTerminal;
+
+ /* call recursively to get the clock selectors */
+ err = check_input_term(state, d->bCSourceID, term);
+ if (err < 0)
+ return err;
}
return 0;
case UAC_FEATURE_UNIT: {
@@ -667,7 +661,8 @@
term->name = uac_mixer_unit_iMixer(d);
return 0;
}
- case UAC_SELECTOR_UNIT: {
+ case UAC_SELECTOR_UNIT:
+ case UAC2_CLOCK_SELECTOR: {
struct uac_selector_unit_descriptor *d = p1;
/* call recursively to retrieve the channel info */
if (check_input_term(state, d->baSourceID[0], term) < 0)
@@ -690,6 +685,13 @@
term->name = uac_processing_unit_iProcessing(d, state->mixer->protocol);
return 0;
}
+ case UAC2_CLOCK_SOURCE: {
+ struct uac_clock_source_descriptor *d = p1;
+ term->type = d->bDescriptorSubtype << 16; /* virtual type */
+ term->id = id;
+ term->name = d->iClockSource;
+ return 0;
+ }
default:
return -ENODEV;
}
@@ -709,16 +711,20 @@
};
static struct usb_feature_control_info audio_feature_info[] = {
- { "Mute", USB_MIXER_INV_BOOLEAN },
- { "Volume", USB_MIXER_S16 },
+ { "Mute", USB_MIXER_INV_BOOLEAN },
+ { "Volume", USB_MIXER_S16 },
{ "Tone Control - Bass", USB_MIXER_S8 },
{ "Tone Control - Mid", USB_MIXER_S8 },
{ "Tone Control - Treble", USB_MIXER_S8 },
{ "Graphic Equalizer", USB_MIXER_S8 }, /* FIXME: not implemeted yet */
- { "Auto Gain Control", USB_MIXER_BOOLEAN },
- { "Delay Control", USB_MIXER_U16 },
- { "Bass Boost", USB_MIXER_BOOLEAN },
- { "Loudness", USB_MIXER_BOOLEAN },
+ { "Auto Gain Control", USB_MIXER_BOOLEAN },
+ { "Delay Control", USB_MIXER_U16 },
+ { "Bass Boost", USB_MIXER_BOOLEAN },
+ { "Loudness", USB_MIXER_BOOLEAN },
+ /* UAC2 specific */
+ { "Input Gain Control", USB_MIXER_U16 },
+ { "Input Gain Pad Control", USB_MIXER_BOOLEAN },
+ { "Phase Inverter Control", USB_MIXER_BOOLEAN },
};
@@ -958,7 +964,7 @@
static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
unsigned int ctl_mask, int control,
struct usb_audio_term *iterm, int unitid,
- int read_only)
+ int readonly_mask)
{
struct uac_feature_unit_descriptor *desc = raw_desc;
unsigned int len = 0;
@@ -970,7 +976,7 @@
control++; /* change from zero-based to 1-based value */
- if (control == UAC_GRAPHIC_EQUALIZER_CONTROL) {
+ if (control == UAC_FU_GRAPHIC_EQUALIZER) {
/* FIXME: not supported yet */
return;
}
@@ -989,20 +995,25 @@
cval->control = control;
cval->cmask = ctl_mask;
cval->val_type = audio_feature_info[control-1].type;
- if (ctl_mask == 0)
+ if (ctl_mask == 0) {
cval->channels = 1; /* master channel */
- else {
+ cval->master_readonly = readonly_mask;
+ } else {
int i, c = 0;
for (i = 0; i < 16; i++)
if (ctl_mask & (1 << i))
c++;
cval->channels = c;
+ cval->ch_readonly = readonly_mask;
}
/* get min/max values */
get_min_max(cval, 0);
- if (read_only)
+ /* if all channels in the mask are marked read-only, make the control
+ * read-only. set_cur_mix_value() will check the mask again and won't
+ * issue write commands to read-only channels. */
+ if (cval->channels == readonly_mask)
kctl = snd_ctl_new1(&usb_feature_unit_ctl_ro, cval);
else
kctl = snd_ctl_new1(&usb_feature_unit_ctl, cval);
@@ -1021,8 +1032,8 @@
kctl->id.name, sizeof(kctl->id.name));
switch (control) {
- case UAC_MUTE_CONTROL:
- case UAC_VOLUME_CONTROL:
+ case UAC_FU_MUTE:
+ case UAC_FU_VOLUME:
/* determine the control name. the rule is:
* - if a name id is given in descriptor, use it.
* - if the connected input can be determined, then use the name
@@ -1049,9 +1060,9 @@
len = append_ctl_name(kctl, " Playback");
}
}
- append_ctl_name(kctl, control == UAC_MUTE_CONTROL ?
+ append_ctl_name(kctl, control == UAC_FU_MUTE ?
" Switch" : " Volume");
- if (control == UAC_VOLUME_CONTROL) {
+ if (control == UAC_FU_VOLUME) {
kctl->tlv.c = mixer_vol_tlv;
kctl->vd[0].access |=
SNDRV_CTL_ELEM_ACCESS_TLV_READ |
@@ -1096,6 +1107,19 @@
}
break;
+ case USB_ID(0x046d, 0x0809):
+ case USB_ID(0x046d, 0x0991):
+ /* Most audio usb devices lie about volume resolution.
+ * Most Logitech webcams have res = 384.
+ * Proboly there is some logitech magic behind this number --fishor
+ */
+ if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+ snd_printk(KERN_INFO
+ "set resolution quirk: cval->res = 384\n");
+ cval->res = 384;
+ }
+ break;
+
}
snd_printdd(KERN_INFO "[%d] FU [%s] ch = %d, val = %d/%d/%d\n",
@@ -1126,7 +1150,7 @@
} else {
struct uac2_feature_unit_descriptor *ftr = _ftr;
csize = 4;
- channels = (hdr->bLength - 6) / 4;
+ channels = (hdr->bLength - 6) / 4 - 1;
bmaControls = ftr->bmaControls;
}
@@ -1150,7 +1174,7 @@
snd_printk(KERN_INFO
"usbmixer: master volume quirk for PCM2702 chip\n");
/* disable non-functional volume control */
- master_bits &= ~UAC_FU_VOLUME;
+ master_bits &= ~UAC_CONTROL_BIT(UAC_FU_VOLUME);
break;
}
if (channels > 0)
@@ -1188,19 +1212,22 @@
for (j = 0; j < channels; j++) {
unsigned int mask = snd_usb_combine_bytes(bmaControls + csize * (j+1), csize);
- if (mask & (1 << (i * 2))) {
+ if (uac2_control_is_readable(mask, i)) {
ch_bits |= (1 << j);
- if (~mask & (1 << ((i * 2) + 1)))
+ if (!uac2_control_is_writeable(mask, i))
ch_read_only |= (1 << j);
}
}
- /* FIXME: the whole unit is read-only if any of the channels is marked read-only */
+ /* NOTE: build_feature_ctl() will mark the control read-only if all channels
+ * are marked read-only in the descriptors. Otherwise, the control will be
+ * reported as writeable, but the driver will not actually issue a write
+ * command for read-only channels */
if (ch_bits & 1) /* the first channel must be set (for ease of programming) */
- build_feature_ctl(state, _ftr, ch_bits, i, &iterm, unitid, !!ch_read_only);
- if (master_bits & (1 << i * 2))
+ build_feature_ctl(state, _ftr, ch_bits, i, &iterm, unitid, ch_read_only);
+ if (uac2_control_is_readable(master_bits, i))
build_feature_ctl(state, _ftr, 0, i, &iterm, unitid,
- ~master_bits & (1 << ((i * 2) + 1)));
+ !uac2_control_is_writeable(master_bits, i));
}
}
@@ -1392,51 +1419,51 @@
};
static struct procunit_value_info updown_proc_info[] = {
- { USB_PROC_UPDOWN_SWITCH, "Switch", USB_MIXER_BOOLEAN },
- { USB_PROC_UPDOWN_MODE_SEL, "Mode Select", USB_MIXER_U8, 1 },
+ { UAC_UD_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+ { UAC_UD_MODE_SELECT, "Mode Select", USB_MIXER_U8, 1 },
{ 0 }
};
static struct procunit_value_info prologic_proc_info[] = {
- { USB_PROC_PROLOGIC_SWITCH, "Switch", USB_MIXER_BOOLEAN },
- { USB_PROC_PROLOGIC_MODE_SEL, "Mode Select", USB_MIXER_U8, 1 },
+ { UAC_DP_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+ { UAC_DP_MODE_SELECT, "Mode Select", USB_MIXER_U8, 1 },
{ 0 }
};
static struct procunit_value_info threed_enh_proc_info[] = {
- { USB_PROC_3DENH_SWITCH, "Switch", USB_MIXER_BOOLEAN },
- { USB_PROC_3DENH_SPACE, "Spaciousness", USB_MIXER_U8 },
+ { UAC_3D_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+ { UAC_3D_SPACE, "Spaciousness", USB_MIXER_U8 },
{ 0 }
};
static struct procunit_value_info reverb_proc_info[] = {
- { USB_PROC_REVERB_SWITCH, "Switch", USB_MIXER_BOOLEAN },
- { USB_PROC_REVERB_LEVEL, "Level", USB_MIXER_U8 },
- { USB_PROC_REVERB_TIME, "Time", USB_MIXER_U16 },
- { USB_PROC_REVERB_DELAY, "Delay", USB_MIXER_U8 },
+ { UAC_REVERB_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+ { UAC_REVERB_LEVEL, "Level", USB_MIXER_U8 },
+ { UAC_REVERB_TIME, "Time", USB_MIXER_U16 },
+ { UAC_REVERB_FEEDBACK, "Feedback", USB_MIXER_U8 },
{ 0 }
};
static struct procunit_value_info chorus_proc_info[] = {
- { USB_PROC_CHORUS_SWITCH, "Switch", USB_MIXER_BOOLEAN },
- { USB_PROC_CHORUS_LEVEL, "Level", USB_MIXER_U8 },
- { USB_PROC_CHORUS_RATE, "Rate", USB_MIXER_U16 },
- { USB_PROC_CHORUS_DEPTH, "Depth", USB_MIXER_U16 },
+ { UAC_CHORUS_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+ { UAC_CHORUS_LEVEL, "Level", USB_MIXER_U8 },
+ { UAC_CHORUS_RATE, "Rate", USB_MIXER_U16 },
+ { UAC_CHORUS_DEPTH, "Depth", USB_MIXER_U16 },
{ 0 }
};
static struct procunit_value_info dcr_proc_info[] = {
- { USB_PROC_DCR_SWITCH, "Switch", USB_MIXER_BOOLEAN },
- { USB_PROC_DCR_RATIO, "Ratio", USB_MIXER_U16 },
- { USB_PROC_DCR_MAX_AMP, "Max Amp", USB_MIXER_S16 },
- { USB_PROC_DCR_THRESHOLD, "Threshold", USB_MIXER_S16 },
- { USB_PROC_DCR_ATTACK, "Attack Time", USB_MIXER_U16 },
- { USB_PROC_DCR_RELEASE, "Release Time", USB_MIXER_U16 },
+ { UAC_DCR_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+ { UAC_DCR_RATE, "Ratio", USB_MIXER_U16 },
+ { UAC_DCR_MAXAMPL, "Max Amp", USB_MIXER_S16 },
+ { UAC_DCR_THRESHOLD, "Threshold", USB_MIXER_S16 },
+ { UAC_DCR_ATTACK_TIME, "Attack Time", USB_MIXER_U16 },
+ { UAC_DCR_RELEASE_TIME, "Release Time", USB_MIXER_U16 },
{ 0 }
};
static struct procunit_info procunits[] = {
- { USB_PROC_UPDOWN, "Up Down", updown_proc_info },
- { USB_PROC_PROLOGIC, "Dolby Prologic", prologic_proc_info },
- { USB_PROC_3DENH, "3D Stereo Extender", threed_enh_proc_info },
- { USB_PROC_REVERB, "Reverb", reverb_proc_info },
- { USB_PROC_CHORUS, "Chorus", chorus_proc_info },
- { USB_PROC_DCR, "DCR", dcr_proc_info },
+ { UAC_PROCESS_UP_DOWNMIX, "Up Down", updown_proc_info },
+ { UAC_PROCESS_DOLBY_PROLOGIC, "Dolby Prologic", prologic_proc_info },
+ { UAC_PROCESS_STEREO_EXTENDER, "3D Stereo Extender", threed_enh_proc_info },
+ { UAC_PROCESS_REVERB, "Reverb", reverb_proc_info },
+ { UAC_PROCESS_CHORUS, "Chorus", chorus_proc_info },
+ { UAC_PROCESS_DYN_RANGE_COMP, "DCR", dcr_proc_info },
{ 0 },
};
/*
@@ -1524,7 +1551,7 @@
cval->channels = 1;
/* get min/max values */
- if (type == USB_PROC_UPDOWN && cval->control == USB_PROC_UPDOWN_MODE_SEL) {
+ if (type == UAC_PROCESS_UP_DOWNMIX && cval->control == UAC_UD_MODE_SELECT) {
__u8 *control_spec = uac_processing_unit_specific(desc, state->mixer->protocol);
/* FIXME: hard-coded */
cval->min = 1;
@@ -1619,7 +1646,7 @@
struct usb_mixer_elem_info *cval = kcontrol->private_data;
int val, err;
- err = get_cur_ctl_value(cval, 0, &val);
+ err = get_cur_ctl_value(cval, cval->control << 8, &val);
if (err < 0) {
if (cval->mixer->ignore_ctl_error) {
ucontrol->value.enumerated.item[0] = 0;
@@ -1638,7 +1665,7 @@
struct usb_mixer_elem_info *cval = kcontrol->private_data;
int val, oval, err;
- err = get_cur_ctl_value(cval, 0, &oval);
+ err = get_cur_ctl_value(cval, cval->control << 8, &oval);
if (err < 0) {
if (cval->mixer->ignore_ctl_error)
return 0;
@@ -1647,7 +1674,7 @@
val = ucontrol->value.enumerated.item[0];
val = get_abs_value(cval, val);
if (val != oval) {
- set_cur_ctl_value(cval, 0, val);
+ set_cur_ctl_value(cval, cval->control << 8, val);
return 1;
}
return 0;
@@ -1729,6 +1756,11 @@
cval->res = 1;
cval->initialized = 1;
+ if (desc->bDescriptorSubtype == UAC2_CLOCK_SELECTOR)
+ cval->control = UAC2_CX_CLOCK_SELECTOR;
+ else
+ cval->control = 0;
+
namelist = kmalloc(sizeof(char *) * desc->bNrInPins, GFP_KERNEL);
if (! namelist) {
snd_printk(KERN_ERR "cannot malloc\n");
@@ -1778,7 +1810,9 @@
if (! len)
strlcpy(kctl->id.name, "USB", sizeof(kctl->id.name));
- if ((state->oterm.type & 0xff00) == 0x0100)
+ if (desc->bDescriptorSubtype == UAC2_CLOCK_SELECTOR)
+ append_ctl_name(kctl, " Clock Source");
+ else if ((state->oterm.type & 0xff00) == 0x0100)
append_ctl_name(kctl, " Capture Source");
else
append_ctl_name(kctl, " Playback Source");
@@ -1812,10 +1846,12 @@
switch (p1[2]) {
case UAC_INPUT_TERMINAL:
+ case UAC2_CLOCK_SOURCE:
return 0; /* NOP */
case UAC_MIXER_UNIT:
return parse_audio_mixer_unit(state, unitid, p1);
case UAC_SELECTOR_UNIT:
+ case UAC2_CLOCK_SELECTOR:
return parse_audio_selector_unit(state, unitid, p1);
case UAC_FEATURE_UNIT:
return parse_audio_feature_unit(state, unitid, p1);
@@ -1912,6 +1948,11 @@
err = parse_audio_unit(&state, desc->bSourceID);
if (err < 0)
return err;
+
+ /* for UAC2, use the same approach to also add the clock selectors */
+ err = parse_audio_unit(&state, desc->bCSourceID);
+ if (err < 0)
+ return err;
}
}
diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h
index 1301238..a7cf100 100644
--- a/sound/usb/mixer.h
+++ b/sound/usb/mixer.h
@@ -34,6 +34,8 @@
unsigned int id;
unsigned int control; /* CS or ICN (high byte) */
unsigned int cmask; /* channel mask bitmap: 0 = master */
+ unsigned int ch_readonly;
+ unsigned int master_readonly;
int channels;
int val_type;
int min, max, res;
diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c
index d93fc89..f1324c4 100644
--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -85,8 +85,8 @@
/* 16: MU (w/o controls) */
{ 17, NULL, 1 }, /* DISABLED: PU-switch (any effect?) */
{ 17, "Channel Routing", 2 }, /* PU: mode select */
- { 18, "Tone Control - Bass", UAC_BASS_CONTROL }, /* FU */
- { 18, "Tone Control - Treble", UAC_TREBLE_CONTROL }, /* FU */
+ { 18, "Tone Control - Bass", UAC_FU_BASS }, /* FU */
+ { 18, "Tone Control - Treble", UAC_FU_TREBLE }, /* FU */
{ 18, "Master Playback" }, /* FU; others */
/* 19: OT speaker */
/* 20: OT headphone */
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 2bf0d77..4568298 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -31,6 +31,7 @@
#include "urb.h"
#include "helper.h"
#include "pcm.h"
+#include "clock.h"
/*
* return the current pcm pointer. just based on the hwptr_done value.
@@ -120,10 +121,6 @@
ep = get_endpoint(alts, 0)->bEndpointAddress;
- /* if endpoint doesn't have pitch control, bail out */
- if (!(fmt->attributes & UAC_EP_CS_ATTR_PITCH_CONTROL))
- return 0;
-
data[0] = 1;
if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT,
@@ -137,8 +134,32 @@
return 0;
}
+static int init_pitch_v2(struct snd_usb_audio *chip, int iface,
+ struct usb_host_interface *alts,
+ struct audioformat *fmt)
+{
+ struct usb_device *dev = chip->dev;
+ unsigned char data[1];
+ unsigned int ep;
+ int err;
+
+ ep = get_endpoint(alts, 0)->bEndpointAddress;
+
+ data[0] = 1;
+ if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC2_CS_CUR,
+ USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+ UAC2_EP_CS_PITCH << 8, 0,
+ data, sizeof(data), 1000)) < 0) {
+ snd_printk(KERN_ERR "%d:%d:%d: cannot set enable PITCH (v2)\n",
+ dev->devnum, iface, fmt->altsetting);
+ return err;
+ }
+
+ return 0;
+}
+
/*
- * initialize the picth control and sample rate
+ * initialize the pitch control and sample rate
*/
int snd_usb_init_pitch(struct snd_usb_audio *chip, int iface,
struct usb_host_interface *alts,
@@ -146,110 +167,16 @@
{
struct usb_interface_descriptor *altsd = get_iface_desc(alts);
+ /* if endpoint doesn't have pitch control, bail out */
+ if (!(fmt->attributes & UAC_EP_CS_ATTR_PITCH_CONTROL))
+ return 0;
+
switch (altsd->bInterfaceProtocol) {
case UAC_VERSION_1:
return init_pitch_v1(chip, iface, alts, fmt);
case UAC_VERSION_2:
- /* not implemented yet */
- return 0;
- }
-
- return -EINVAL;
-}
-
-static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
- struct usb_host_interface *alts,
- struct audioformat *fmt, int rate)
-{
- struct usb_device *dev = chip->dev;
- unsigned int ep;
- unsigned char data[3];
- int err, crate;
-
- ep = get_endpoint(alts, 0)->bEndpointAddress;
- /* if endpoint doesn't have sampling rate control, bail out */
- if (!(fmt->attributes & UAC_EP_CS_ATTR_SAMPLE_RATE)) {
- snd_printk(KERN_WARNING "%d:%d:%d: endpoint lacks sample rate attribute bit, cannot set.\n",
- dev->devnum, iface, fmt->altsetting);
- return 0;
- }
-
- data[0] = rate;
- data[1] = rate >> 8;
- data[2] = rate >> 16;
- if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
- USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT,
- UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
- data, sizeof(data), 1000)) < 0) {
- snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep %#x\n",
- dev->devnum, iface, fmt->altsetting, rate, ep);
- return err;
- }
- if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR,
- USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_IN,
- UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
- data, sizeof(data), 1000)) < 0) {
- snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep %#x\n",
- dev->devnum, iface, fmt->altsetting, ep);
- return 0; /* some devices don't support reading */
- }
- crate = data[0] | (data[1] << 8) | (data[2] << 16);
- if (crate != rate) {
- snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
- // runtime->rate = crate;
- }
-
- return 0;
-}
-
-static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
- struct usb_host_interface *alts,
- struct audioformat *fmt, int rate)
-{
- struct usb_device *dev = chip->dev;
- unsigned char data[4];
- int err, crate;
-
- data[0] = rate;
- data[1] = rate >> 8;
- data[2] = rate >> 16;
- data[3] = rate >> 24;
- if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC2_CS_CUR,
- USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
- UAC2_CS_CONTROL_SAM_FREQ << 8, chip->clock_id << 8,
- data, sizeof(data), 1000)) < 0) {
- snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2)\n",
- dev->devnum, iface, fmt->altsetting, rate);
- return err;
- }
- if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
- USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
- UAC2_CS_CONTROL_SAM_FREQ << 8, chip->clock_id << 8,
- data, sizeof(data), 1000)) < 0) {
- snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
- dev->devnum, iface, fmt->altsetting);
- return err;
- }
- crate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
- if (crate != rate)
- snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
-
- return 0;
-}
-
-int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
- struct usb_host_interface *alts,
- struct audioformat *fmt, int rate)
-{
- struct usb_interface_descriptor *altsd = get_iface_desc(alts);
-
- switch (altsd->bInterfaceProtocol) {
- case UAC_VERSION_1:
- return set_sample_rate_v1(chip, iface, alts, fmt, rate);
-
- case UAC_VERSION_2:
- return set_sample_rate_v2(chip, iface, alts, fmt, rate);
+ return init_pitch_v2(chip, iface, alts, fmt);
}
return -EINVAL;
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 91ddef3..f8797f6 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -1973,6 +1973,17 @@
}
},
+/* AKAI devices */
+{
+ USB_DEVICE(0x09e8, 0x0062),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ .vendor_name = "AKAI",
+ .product_name = "MPD16",
+ .ifnum = 0,
+ .type = QUIRK_MIDI_AKAI,
+ }
+},
+
/* TerraTec devices */
{
USB_DEVICE_VENDOR_SPEC(0x0ccd, 0x0012),
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 136e5b4..b45e54c 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -289,6 +289,7 @@
[QUIRK_MIDI_FASTLANE] = create_any_midi_quirk,
[QUIRK_MIDI_EMAGIC] = create_any_midi_quirk,
[QUIRK_MIDI_CME] = create_any_midi_quirk,
+ [QUIRK_MIDI_AKAI] = create_any_midi_quirk,
[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
[QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
[QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index d679e72..24d3319 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -40,9 +40,6 @@
int num_interfaces;
int num_suspended_intf;
- /* for audio class v2 */
- int clock_id;
-
struct list_head pcm_list; /* list of pcm streams */
int pcm_devs;
@@ -53,6 +50,8 @@
int setup; /* from the 'device_setup' module param */
int nrpacks; /* from the 'nrpacks' module param */
int async_unlink; /* from the 'async_unlink' module param */
+
+ struct usb_host_interface *ctrl_intf; /* the audio control interface */
};
/*
@@ -74,6 +73,7 @@
QUIRK_MIDI_FASTLANE,
QUIRK_MIDI_EMAGIC,
QUIRK_MIDI_CME,
+ QUIRK_MIDI_AKAI,
QUIRK_MIDI_US122L,
QUIRK_AUDIO_STANDARD_INTERFACE,
QUIRK_AUDIO_FIXED_ENDPOINT,
diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt
index 2cab8e8..909fa76 100644
--- a/tools/perf/Documentation/perf-stat.txt
+++ b/tools/perf/Documentation/perf-stat.txt
@@ -43,6 +43,9 @@
-c::
scale counter values
+-B::
+ print large numbers with thousands' separators according to locale
+
EXAMPLES
--------
diff --git a/tools/perf/arch/sparc/Makefile b/tools/perf/arch/sparc/Makefile
new file mode 100644
index 0000000..15130b5
--- /dev/null
+++ b/tools/perf/arch/sparc/Makefile
@@ -0,0 +1,4 @@
+ifndef NO_DWARF
+PERF_HAVE_DWARF_REGS := 1
+LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
+endif
diff --git a/tools/perf/arch/sparc/util/dwarf-regs.c b/tools/perf/arch/sparc/util/dwarf-regs.c
new file mode 100644
index 0000000..0ab8848
--- /dev/null
+++ b/tools/perf/arch/sparc/util/dwarf-regs.c
@@ -0,0 +1,43 @@
+/*
+ * Mapping of DWARF debug register numbers into register names.
+ *
+ * Copyright (C) 2010 David S. Miller <davem@davemloft.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <libio.h>
+#include <dwarf-regs.h>
+
+#define SPARC_MAX_REGS 96
+
+const char *sparc_regs_table[SPARC_MAX_REGS] = {
+ "%g0", "%g1", "%g2", "%g3", "%g4", "%g5", "%g6", "%g7",
+ "%o0", "%o1", "%o2", "%o3", "%o4", "%o5", "%sp", "%o7",
+ "%l0", "%l1", "%l2", "%l3", "%l4", "%l5", "%l6", "%l7",
+ "%i0", "%i1", "%i2", "%i3", "%i4", "%i5", "%fp", "%i7",
+ "%f0", "%f1", "%f2", "%f3", "%f4", "%f5", "%f6", "%f7",
+ "%f8", "%f9", "%f10", "%f11", "%f12", "%f13", "%f14", "%f15",
+ "%f16", "%f17", "%f18", "%f19", "%f20", "%f21", "%f22", "%f23",
+ "%f24", "%f25", "%f26", "%f27", "%f28", "%f29", "%f30", "%f31",
+ "%f32", "%f33", "%f34", "%f35", "%f36", "%f37", "%f38", "%f39",
+ "%f40", "%f41", "%f42", "%f43", "%f44", "%f45", "%f46", "%f47",
+ "%f48", "%f49", "%f50", "%f51", "%f52", "%f53", "%f54", "%f55",
+ "%f56", "%f57", "%f58", "%f59", "%f60", "%f61", "%f62", "%f63",
+};
+
+/**
+ * get_arch_regstr() - lookup register name from it's DWARF register number
+ * @n: the DWARF register number
+ *
+ * get_arch_regstr() returns the name of the register in struct
+ * regdwarfnum_table from it's DWARF register number. If the register is not
+ * found in the table, this returns NULL;
+ */
+const char *get_arch_regstr(unsigned int n)
+{
+ return (n <= SPARC_MAX_REGS) ? sparc_regs_table[n] : NULL;
+}
diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c
index 77bcc9b..96db524 100644
--- a/tools/perf/builtin-annotate.c
+++ b/tools/perf/builtin-annotate.c
@@ -277,7 +277,7 @@
printf("%*s: %Lu\n", BITS_PER_LONG / 2, "h->sum", h->sum);
}
-static void annotate_sym(struct hist_entry *he)
+static int hist_entry__tty_annotate(struct hist_entry *he)
{
struct map *map = he->ms.map;
struct dso *dso = map->dso;
@@ -288,7 +288,7 @@
struct objdump_line *pos, *n;
if (hist_entry__annotate(he, &head) < 0)
- return;
+ return -1;
if (full_paths)
d_filename = filename;
@@ -317,30 +317,59 @@
if (print_line)
free_source_line(he, len);
+
+ return 0;
}
static void hists__find_annotations(struct hists *self)
{
- struct rb_node *nd;
+ struct rb_node *first = rb_first(&self->entries), *nd = first;
+ int key = KEY_RIGHT;
- for (nd = rb_first(&self->entries); nd; nd = rb_next(nd)) {
+ while (nd) {
struct hist_entry *he = rb_entry(nd, struct hist_entry, rb_node);
struct sym_priv *priv;
- if (he->ms.sym == NULL)
- continue;
+ if (he->ms.sym == NULL || he->ms.map->dso->annotate_warned)
+ goto find_next;
priv = symbol__priv(he->ms.sym);
- if (priv->hist == NULL)
+ if (priv->hist == NULL) {
+find_next:
+ if (key == KEY_LEFT)
+ nd = rb_prev(nd);
+ else
+ nd = rb_next(nd);
continue;
+ }
- annotate_sym(he);
- /*
- * Since we have a hist_entry per IP for the same symbol, free
- * he->ms.sym->hist to signal we already processed this symbol.
- */
- free(priv->hist);
- priv->hist = NULL;
+ if (use_browser > 0) {
+ key = hist_entry__tui_annotate(he);
+ if (is_exit_key(key))
+ break;
+ switch (key) {
+ case KEY_RIGHT:
+ case '\t':
+ nd = rb_next(nd);
+ break;
+ case KEY_LEFT:
+ if (nd == first)
+ continue;
+ nd = rb_prev(nd);
+ default:
+ break;
+ }
+ } else {
+ hist_entry__tty_annotate(he);
+ nd = rb_next(nd);
+ /*
+ * Since we have a hist_entry per IP for the same
+ * symbol, free he->ms.sym->hist to signal we already
+ * processed this symbol.
+ */
+ free(priv->hist);
+ priv->hist = NULL;
+ }
}
}
@@ -416,6 +445,8 @@
{
argc = parse_options(argc, argv, options, annotate_usage, 0);
+ setup_browser();
+
symbol_conf.priv_size = sizeof(struct sym_priv);
symbol_conf.try_vmlinux_path = true;
@@ -435,8 +466,6 @@
sym_hist_filter = argv[0];
}
- setup_pager();
-
if (field_sep && *field_sep == '.') {
pr_err("'.' is the only non valid --field-separator argument\n");
return -1;
diff --git a/tools/perf/builtin-buildid-list.c b/tools/perf/builtin-buildid-list.c
index 44a47e1..9989072 100644
--- a/tools/perf/builtin-buildid-list.c
+++ b/tools/perf/builtin-buildid-list.c
@@ -43,8 +43,10 @@
if (session == NULL)
return -1;
- if (with_hits)
+ if (with_hits) {
+ symbol_conf.full_paths = true;
perf_session__process_events(session, &build_id__mark_dso_hit_ops);
+ }
perf_session__fprintf_dsos_buildid(session, stdout, with_hits);
diff --git a/tools/perf/builtin-probe.c b/tools/perf/builtin-probe.c
index 61c6d70..e4a4da3 100644
--- a/tools/perf/builtin-probe.c
+++ b/tools/perf/builtin-probe.c
@@ -65,8 +65,10 @@
int ret;
pr_debug("probe-definition(%d): %s\n", params.nevents, str);
- if (++params.nevents == MAX_PROBES)
- die("Too many probes (> %d) are specified.", MAX_PROBES);
+ if (++params.nevents == MAX_PROBES) {
+ pr_err("Too many probes (> %d) were specified.", MAX_PROBES);
+ return -1;
+ }
/* Parse a perf-probe command into event */
ret = parse_perf_probe_command(str, pev);
@@ -84,7 +86,9 @@
len = 0;
for (i = 0; i < argc; i++)
len += strlen(argv[i]) + 1;
- buf = xzalloc(len + 1);
+ buf = zalloc(len + 1);
+ if (buf == NULL)
+ return -ENOMEM;
len = 0;
for (i = 0; i < argc; i++)
len += sprintf(&buf[len], "%s ", argv[i]);
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index cb46c7d..711745f 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -25,6 +25,7 @@
#include <unistd.h>
#include <sched.h>
+#include <sys/mman.h>
enum write_mode_t {
WRITE_FORCE,
@@ -60,13 +61,8 @@
static bool inherit_stat = false;
static bool no_samples = false;
static bool sample_address = false;
-static bool multiplex = false;
-static int multiplex_fd = -1;
static long samples = 0;
-static struct timeval last_read;
-static struct timeval this_read;
-
static u64 bytes_written = 0;
static struct pollfd *event_array;
@@ -86,7 +82,7 @@
unsigned int prev;
};
-static struct mmap_data *mmap_array[MAX_NR_CPUS][MAX_COUNTERS];
+static struct mmap_data mmap_array[MAX_NR_CPUS];
static unsigned long mmap_read_head(struct mmap_data *md)
{
@@ -146,8 +142,6 @@
void *buf;
int diff;
- gettimeofday(&this_read, NULL);
-
/*
* If we're further behind than half the buffer, there's a chance
* the writer will bite our tail and mess up the samples under us.
@@ -158,23 +152,13 @@
*/
diff = head - old;
if (diff < 0) {
- struct timeval iv;
- unsigned long msecs;
-
- timersub(&this_read, &last_read, &iv);
- msecs = iv.tv_sec*1000 + iv.tv_usec/1000;
-
- fprintf(stderr, "WARNING: failed to keep up with mmap data."
- " Last read %lu msecs ago.\n", msecs);
-
+ fprintf(stderr, "WARNING: failed to keep up with mmap data\n");
/*
* head points to a known good entry, start there.
*/
old = head;
}
- last_read = this_read;
-
if (old != head)
samples++;
@@ -209,7 +193,7 @@
static void sig_atexit(void)
{
- if (child_pid != -1)
+ if (child_pid > 0)
kill(child_pid, SIGTERM);
if (signr == -1)
@@ -380,27 +364,30 @@
*/
if (group && group_fd == -1)
group_fd = fd[nr_cpu][counter][thread_index];
- if (multiplex && multiplex_fd == -1)
- multiplex_fd = fd[nr_cpu][counter][thread_index];
- if (multiplex && fd[nr_cpu][counter][thread_index] != multiplex_fd) {
-
- ret = ioctl(fd[nr_cpu][counter][thread_index], PERF_EVENT_IOC_SET_OUTPUT, multiplex_fd);
- assert(ret != -1);
+ if (counter || thread_index) {
+ ret = ioctl(fd[nr_cpu][counter][thread_index],
+ PERF_EVENT_IOC_SET_OUTPUT,
+ fd[nr_cpu][0][0]);
+ if (ret) {
+ error("failed to set output: %d (%s)\n", errno,
+ strerror(errno));
+ exit(-1);
+ }
} else {
- event_array[nr_poll].fd = fd[nr_cpu][counter][thread_index];
- event_array[nr_poll].events = POLLIN;
- nr_poll++;
-
- mmap_array[nr_cpu][counter][thread_index].counter = counter;
- mmap_array[nr_cpu][counter][thread_index].prev = 0;
- mmap_array[nr_cpu][counter][thread_index].mask = mmap_pages*page_size - 1;
- mmap_array[nr_cpu][counter][thread_index].base = mmap(NULL, (mmap_pages+1)*page_size,
+ mmap_array[nr_cpu].counter = counter;
+ mmap_array[nr_cpu].prev = 0;
+ mmap_array[nr_cpu].mask = mmap_pages*page_size - 1;
+ mmap_array[nr_cpu].base = mmap(NULL, (mmap_pages+1)*page_size,
PROT_READ|PROT_WRITE, MAP_SHARED, fd[nr_cpu][counter][thread_index], 0);
- if (mmap_array[nr_cpu][counter][thread_index].base == MAP_FAILED) {
+ if (mmap_array[nr_cpu].base == MAP_FAILED) {
error("failed to mmap with %d (%s)\n", errno, strerror(errno));
exit(-1);
}
+
+ event_array[nr_poll].fd = fd[nr_cpu][counter][thread_index];
+ event_array[nr_poll].events = POLLIN;
+ nr_poll++;
}
if (filter != NULL) {
@@ -501,16 +488,11 @@
static void mmap_read_all(void)
{
- int i, counter, thread;
+ int i;
for (i = 0; i < nr_cpu; i++) {
- for (counter = 0; counter < nr_counters; counter++) {
- for (thread = 0; thread < thread_num; thread++) {
- if (mmap_array[i][counter][thread].base)
- mmap_read(&mmap_array[i][counter][thread]);
- }
-
- }
+ if (mmap_array[i].base)
+ mmap_read(&mmap_array[i]);
}
if (perf_header__has_feat(&session->header, HEADER_TRACE_INFO))
@@ -521,7 +503,6 @@
{
int i, counter;
struct stat st;
- pid_t pid = 0;
int flags;
int err;
unsigned long waking = 0;
@@ -590,7 +571,7 @@
if (forks) {
child_pid = fork();
- if (pid < 0) {
+ if (child_pid < 0) {
perror("failed to fork");
exit(-1);
}
@@ -834,8 +815,6 @@
"Sample addresses"),
OPT_BOOLEAN('n', "no-samples", &no_samples,
"don't sample"),
- OPT_BOOLEAN('M', "multiplex", &multiplex,
- "multiplex counter output in a single channel"),
OPT_END()
};
@@ -887,9 +866,7 @@
for (i = 0; i < MAX_NR_CPUS; i++) {
for (j = 0; j < MAX_COUNTERS; j++) {
fd[i][j] = malloc(sizeof(int)*thread_num);
- mmap_array[i][j] = zalloc(
- sizeof(struct mmap_data)*thread_num);
- if (!fd[i][j] || !mmap_array[i][j])
+ if (!fd[i][j])
return -ENOMEM;
}
}
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 1d3c100..fd7407c 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -107,7 +107,7 @@
goto out_free_syms;
err = 0;
if (symbol_conf.use_callchain) {
- err = append_chain(he->callchain, data->callchain, syms);
+ err = append_chain(he->callchain, data->callchain, syms, data->period);
if (err)
goto out_free_syms;
}
@@ -116,7 +116,7 @@
* so we don't allocated the extra space needed because the stdio
* code will not use it.
*/
- if (use_browser)
+ if (use_browser > 0)
err = hist_entry__inc_addr_samples(he, al->addr);
out_free_syms:
free(syms);
@@ -288,6 +288,38 @@
return ret + fprintf(fp, "\n#\n");
}
+static int hists__tty_browse_tree(struct rb_root *tree, const char *help)
+{
+ struct rb_node *next = rb_first(tree);
+
+ while (next) {
+ struct hists *hists = rb_entry(next, struct hists, rb_node);
+ const char *evname = NULL;
+
+ if (rb_first(&hists->entries) != rb_last(&hists->entries))
+ evname = __event_name(hists->type, hists->config);
+
+ hists__fprintf_nr_sample_events(hists, evname, stdout);
+ hists__fprintf(hists, NULL, false, stdout);
+ fprintf(stdout, "\n\n");
+ next = rb_next(&hists->rb_node);
+ }
+
+ if (sort_order == default_sort_order &&
+ parent_pattern == default_parent_pattern) {
+ fprintf(stdout, "#\n# (%s)\n#\n", help);
+
+ if (show_threads) {
+ bool style = !strcmp(pretty_printing_style, "raw");
+ perf_read_values_display(stdout, &show_threads_values,
+ style);
+ perf_read_values_destroy(&show_threads_values);
+ }
+ }
+
+ return 0;
+}
+
static int __cmd_report(void)
{
int ret = -EINVAL;
@@ -330,34 +362,14 @@
hists = rb_entry(next, struct hists, rb_node);
hists__collapse_resort(hists);
hists__output_resort(hists);
- if (use_browser)
- hists__browse(hists, help, input_name);
- else {
- const char *evname = NULL;
- if (rb_first(&session->hists.entries) !=
- rb_last(&session->hists.entries))
- evname = __event_name(hists->type, hists->config);
-
- hists__fprintf_nr_sample_events(hists, evname, stdout);
-
- hists__fprintf(hists, NULL, false, stdout);
- fprintf(stdout, "\n\n");
- }
-
next = rb_next(&hists->rb_node);
}
- if (!use_browser && sort_order == default_sort_order &&
- parent_pattern == default_parent_pattern) {
- fprintf(stdout, "#\n# (%s)\n#\n", help);
+ if (use_browser > 0)
+ hists__tui_browse_tree(&session->hists_tree, help);
+ else
+ hists__tty_browse_tree(&session->hists_tree, help);
- if (show_threads) {
- bool style = !strcmp(pretty_printing_style, "raw");
- perf_read_values_display(stdout, &show_threads_values,
- style);
- perf_read_values_destroy(&show_threads_values);
- }
- }
out_delete:
perf_session__delete(session);
return ret;
@@ -491,7 +503,7 @@
* so don't allocate extra space that won't be used in the stdio
* implementation.
*/
- if (use_browser)
+ if (use_browser > 0)
symbol_conf.priv_size = sizeof(struct sym_priv);
if (symbol__init() < 0)
diff --git a/tools/perf/builtin-sched.c b/tools/perf/builtin-sched.c
index f67bce2..55f3b5d 100644
--- a/tools/perf/builtin-sched.c
+++ b/tools/perf/builtin-sched.c
@@ -1645,6 +1645,7 @@
.sample = process_sample_event,
.comm = event__process_comm,
.lost = event__process_lost,
+ .fork = event__process_task,
.ordered_samples = true,
};
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index ff8c413..9a39ca3 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -50,6 +50,7 @@
#include <sys/prctl.h>
#include <math.h>
+#include <locale.h>
static struct perf_event_attr default_attrs[] = {
@@ -80,6 +81,8 @@
static int thread_num = 0;
static pid_t child_pid = -1;
static bool null_run = false;
+static bool big_num = false;
+
static int *fd[MAX_NR_CPUS][MAX_COUNTERS];
@@ -377,7 +380,7 @@
{
double msecs = avg / 1e6;
- fprintf(stderr, " %14.6f %-24s", msecs, event_name(counter));
+ fprintf(stderr, " %18.6f %-24s", msecs, event_name(counter));
if (MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter)) {
fprintf(stderr, " # %10.3f CPUs ",
@@ -389,7 +392,10 @@
{
double total, ratio = 0.0;
- fprintf(stderr, " %14.0f %-24s", avg, event_name(counter));
+ if (big_num)
+ fprintf(stderr, " %'18.0f %-24s", avg, event_name(counter));
+ else
+ fprintf(stderr, " %18.0f %-24s", avg, event_name(counter));
if (MATCH_EVENT(HARDWARE, HW_INSTRUCTIONS, counter)) {
total = avg_stats(&runtime_cycles_stats);
@@ -426,7 +432,7 @@
int scaled = event_scaled[counter];
if (scaled == -1) {
- fprintf(stderr, " %14s %-24s\n",
+ fprintf(stderr, " %18s %-24s\n",
"<not counted>", event_name(counter));
return;
}
@@ -477,7 +483,7 @@
print_counter(counter);
fprintf(stderr, "\n");
- fprintf(stderr, " %14.9f seconds time elapsed",
+ fprintf(stderr, " %18.9f seconds time elapsed",
avg_stats(&walltime_nsecs_stats)/1e9);
if (run_count > 1) {
fprintf(stderr, " ( +- %7.3f%% )",
@@ -534,6 +540,8 @@
"repeat command and print average + stddev (max: 100)"),
OPT_BOOLEAN('n', "null", &null_run,
"null run - dont start any counters"),
+ OPT_BOOLEAN('B', "big-num", &big_num,
+ "print large numbers with thousands\' separators"),
OPT_END()
};
@@ -542,6 +550,8 @@
int status;
int i,j;
+ setlocale(LC_ALL, "");
+
argc = parse_options(argc, argv, options, stat_usage,
PARSE_OPT_STOP_AT_NON_OPTION);
if (!argc && target_pid == -1 && target_tid == -1)
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 397290a..a66f427 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -1060,7 +1060,7 @@
pr_err("Can't annotate %s", sym->name);
if (sym_filter_entry->map->dso->origin == DSO__ORIG_KERNEL) {
pr_err(": No vmlinux file was found in the path:\n");
- vmlinux_path__fprintf(stderr);
+ machine__fprintf_vmlinux_path(machine, stderr);
} else
pr_err(".\n");
exit(1);
diff --git a/tools/perf/perf.c b/tools/perf/perf.c
index 08e0e5d..6e48711 100644
--- a/tools/perf/perf.c
+++ b/tools/perf/perf.c
@@ -15,15 +15,15 @@
#include "util/parse-events.h"
#include "util/debugfs.h"
-bool use_browser;
-
const char perf_usage_string[] =
"perf [--version] [--help] COMMAND [ARGS]";
const char perf_more_info_string[] =
"See 'perf help COMMAND' for more information on a specific command.";
+int use_browser = -1;
static int use_pager = -1;
+
struct pager_config {
const char *cmd;
int val;
@@ -49,6 +49,24 @@
return c.val;
}
+static int tui_command_config(const char *var, const char *value, void *data)
+{
+ struct pager_config *c = data;
+ if (!prefixcmp(var, "tui.") && !strcmp(var + 4, c->cmd))
+ c->val = perf_config_bool(var, value);
+ return 0;
+}
+
+/* returns 0 for "no tui", 1 for "use tui", and -1 for "not specified" */
+static int check_tui_config(const char *cmd)
+{
+ struct pager_config c;
+ c.cmd = cmd;
+ c.val = -1;
+ perf_config(tui_command_config, &c);
+ return c.val;
+}
+
static void commit_pager_choice(void)
{
switch (use_pager) {
@@ -255,6 +273,9 @@
if (p->option & RUN_SETUP)
prefix = NULL; /* setup_perf_directory(); */
+ if (use_browser == -1)
+ use_browser = check_tui_config(p->cmd);
+
if (use_pager == -1 && p->option & RUN_SETUP)
use_pager = check_pager_config(p->cmd);
if (use_pager == -1 && p->option & USE_PAGER)
diff --git a/tools/perf/scripts/python/check-perf-trace.py b/tools/perf/scripts/python/check-perf-trace.py
index 964d934..d9f7893 100644
--- a/tools/perf/scripts/python/check-perf-trace.py
+++ b/tools/perf/scripts/python/check-perf-trace.py
@@ -51,8 +51,7 @@
flag_str("kmem__kmalloc", "gfp_flags", gfp_flags)),
-def trace_unhandled(event_name, context, common_cpu, common_secs, common_nsecs,
- common_pid, common_comm):
+def trace_unhandled(event_name, context, event_fields_dict):
try:
unhandled[event_name] += 1
except TypeError:
diff --git a/tools/perf/util/PERF-VERSION-GEN b/tools/perf/util/PERF-VERSION-GEN
index 49ece79..97d7656 100755
--- a/tools/perf/util/PERF-VERSION-GEN
+++ b/tools/perf/util/PERF-VERSION-GEN
@@ -5,17 +5,13 @@
fi
GVF=${OUTPUT}PERF-VERSION-FILE
-DEF_VER=v0.0.2.PERF
LF='
'
-# First see if there is a version file (included in release tarballs),
-# then try git-describe, then default.
-if test -f version
-then
- VN=$(cat version) || VN="$DEF_VER"
-elif test -d .git -o -f .git &&
+# First check if there is a .git to get the version from git describe
+# otherwise try to get the version from the kernel makefile
+if test -d ../../.git -o -f ../../.git &&
VN=$(git describe --abbrev=4 HEAD 2>/dev/null) &&
case "$VN" in
*$LF*) (exit 1) ;;
@@ -27,7 +23,12 @@
then
VN=$(echo "$VN" | sed -e 's/-/./g');
else
- VN="$DEF_VER"
+ eval `grep '^VERSION\s*=' ../../Makefile|tr -d ' '`
+ eval `grep '^PATCHLEVEL\s*=' ../../Makefile|tr -d ' '`
+ eval `grep '^SUBLEVEL\s*=' ../../Makefile|tr -d ' '`
+ eval `grep '^EXTRAVERSION\s*=' ../../Makefile|tr -d ' '`
+
+ VN="${VERSION}.${PATCHLEVEL}.${SUBLEVEL}${EXTRAVERSION}"
fi
VN=$(expr "$VN" : v*'\(.*\)')
diff --git a/tools/perf/util/abspath.c b/tools/perf/util/abspath.c
index a791dd4..0e76aff 100644
--- a/tools/perf/util/abspath.c
+++ b/tools/perf/util/abspath.c
@@ -1,86 +1,5 @@
#include "cache.h"
-/*
- * Do not use this for inspecting *tracked* content. When path is a
- * symlink to a directory, we do not want to say it is a directory when
- * dealing with tracked content in the working tree.
- */
-static int is_directory(const char *path)
-{
- struct stat st;
- return (!stat(path, &st) && S_ISDIR(st.st_mode));
-}
-
-/* We allow "recursive" symbolic links. Only within reason, though. */
-#define MAXDEPTH 5
-
-const char *make_absolute_path(const char *path)
-{
- static char bufs[2][PATH_MAX + 1], *buf = bufs[0], *next_buf = bufs[1];
- char cwd[1024] = "";
- int buf_index = 1, len;
-
- int depth = MAXDEPTH;
- char *last_elem = NULL;
- struct stat st;
-
- if (strlcpy(buf, path, PATH_MAX) >= PATH_MAX)
- die ("Too long path: %.*s", 60, path);
-
- while (depth--) {
- if (!is_directory(buf)) {
- char *last_slash = strrchr(buf, '/');
- if (last_slash) {
- *last_slash = '\0';
- last_elem = xstrdup(last_slash + 1);
- } else {
- last_elem = xstrdup(buf);
- *buf = '\0';
- }
- }
-
- if (*buf) {
- if (!*cwd && !getcwd(cwd, sizeof(cwd)))
- die ("Could not get current working directory");
-
- if (chdir(buf))
- die ("Could not switch to '%s'", buf);
- }
- if (!getcwd(buf, PATH_MAX))
- die ("Could not get current working directory");
-
- if (last_elem) {
- len = strlen(buf);
-
- if (len + strlen(last_elem) + 2 > PATH_MAX)
- die ("Too long path name: '%s/%s'",
- buf, last_elem);
- buf[len] = '/';
- strcpy(buf + len + 1, last_elem);
- free(last_elem);
- last_elem = NULL;
- }
-
- if (!lstat(buf, &st) && S_ISLNK(st.st_mode)) {
- len = readlink(buf, next_buf, PATH_MAX);
- if (len < 0)
- die ("Invalid symlink: %s", buf);
- if (PATH_MAX <= len)
- die("symbolic link too long: %s", buf);
- next_buf[len] = '\0';
- buf = next_buf;
- buf_index = 1 - buf_index;
- next_buf = bufs[buf_index];
- } else
- break;
- }
-
- if (*cwd && chdir(cwd))
- die ("Could not change back to '%s'", cwd);
-
- return buf;
-}
-
static const char *get_pwd_cwd(void)
{
static char cwd[PATH_MAX + 1];
diff --git a/tools/perf/util/build-id.c b/tools/perf/util/build-id.c
index 0f60a39..70c5cf8 100644
--- a/tools/perf/util/build-id.c
+++ b/tools/perf/util/build-id.c
@@ -6,6 +6,8 @@
* Copyright (C) 2009, 2010 Red Hat Inc.
* Copyright (C) 2009, 2010 Arnaldo Carvalho de Melo <acme@redhat.com>
*/
+#include "util.h"
+#include <stdio.h>
#include "build-id.h"
#include "event.h"
#include "symbol.h"
@@ -37,3 +39,23 @@
.mmap = event__process_mmap,
.fork = event__process_task,
};
+
+char *dso__build_id_filename(struct dso *self, char *bf, size_t size)
+{
+ char build_id_hex[BUILD_ID_SIZE * 2 + 1];
+ const char *home;
+
+ if (!self->has_build_id)
+ return NULL;
+
+ build_id__sprintf(self->build_id, sizeof(self->build_id), build_id_hex);
+ home = getenv("HOME");
+ if (bf == NULL) {
+ if (asprintf(&bf, "%s/%s/.build-id/%.2s/%s", home,
+ DEBUG_CACHE_DIR, build_id_hex, build_id_hex + 2) < 0)
+ return NULL;
+ } else
+ snprintf(bf, size, "%s/%s/.build-id/%.2s/%s", home,
+ DEBUG_CACHE_DIR, build_id_hex, build_id_hex + 2);
+ return bf;
+}
diff --git a/tools/perf/util/build-id.h b/tools/perf/util/build-id.h
index 1d981d6..5dafb00 100644
--- a/tools/perf/util/build-id.h
+++ b/tools/perf/util/build-id.h
@@ -5,4 +5,6 @@
extern struct perf_event_ops build_id__mark_dso_hit_ops;
+char *dso__build_id_filename(struct dso *self, char *bf, size_t size);
+
#endif
diff --git a/tools/perf/util/cache.h b/tools/perf/util/cache.h
index 4b9aab7..65fe664 100644
--- a/tools/perf/util/cache.h
+++ b/tools/perf/util/cache.h
@@ -13,56 +13,16 @@
#define PERF_DIR_ENVIRONMENT "PERF_DIR"
#define PERF_WORK_TREE_ENVIRONMENT "PERF_WORK_TREE"
-#define DEFAULT_PERF_DIR_ENVIRONMENT ".perf"
-#define DB_ENVIRONMENT "PERF_OBJECT_DIRECTORY"
-#define INDEX_ENVIRONMENT "PERF_INDEX_FILE"
-#define GRAFT_ENVIRONMENT "PERF_GRAFT_FILE"
-#define TEMPLATE_DIR_ENVIRONMENT "PERF_TEMPLATE_DIR"
-#define CONFIG_ENVIRONMENT "PERF_CONFIG"
#define EXEC_PATH_ENVIRONMENT "PERF_EXEC_PATH"
-#define CEILING_DIRECTORIES_ENVIRONMENT "PERF_CEILING_DIRECTORIES"
-#define PERFATTRIBUTES_FILE ".perfattributes"
-#define INFOATTRIBUTES_FILE "info/attributes"
-#define ATTRIBUTE_MACRO_PREFIX "[attr]"
+#define DEFAULT_PERF_DIR_ENVIRONMENT ".perf"
#define PERF_DEBUGFS_ENVIRONMENT "PERF_DEBUGFS_DIR"
typedef int (*config_fn_t)(const char *, const char *, void *);
extern int perf_default_config(const char *, const char *, void *);
-extern int perf_config_from_file(config_fn_t fn, const char *, void *);
extern int perf_config(config_fn_t fn, void *);
-extern int perf_parse_ulong(const char *, unsigned long *);
extern int perf_config_int(const char *, const char *);
-extern unsigned long perf_config_ulong(const char *, const char *);
-extern int perf_config_bool_or_int(const char *, const char *, int *);
extern int perf_config_bool(const char *, const char *);
-extern int perf_config_string(const char **, const char *, const char *);
-extern int perf_config_set(const char *, const char *);
-extern int perf_config_set_multivar(const char *, const char *, const char *, int);
-extern int perf_config_rename_section(const char *, const char *);
-extern const char *perf_etc_perfconfig(void);
-extern int check_repository_format_version(const char *var, const char *value, void *cb);
-extern int perf_config_system(void);
-extern int perf_config_global(void);
extern int config_error_nonbool(const char *);
-extern const char *config_exclusive_filename;
-
-#define MAX_PERFNAME (1000)
-extern char perf_default_email[MAX_PERFNAME];
-extern char perf_default_name[MAX_PERFNAME];
-extern int user_ident_explicitly_given;
-
-extern const char *perf_log_output_encoding;
-extern const char *perf_mailmap_file;
-
-/* IO helper functions */
-extern void maybe_flush_or_die(FILE *, const char *);
-extern int copy_fd(int ifd, int ofd);
-extern int copy_file(const char *dst, const char *src, int mode);
-extern ssize_t write_in_full(int fd, const void *buf, size_t count);
-extern void write_or_die(int fd, const void *buf, size_t count);
-extern int write_or_whine(int fd, const void *buf, size_t count, const char *msg);
-extern int write_or_whine_pipe(int fd, const void *buf, size_t count, const char *msg);
-extern void fsync_or_die(int fd, const char *);
/* pager.c */
extern void setup_pager(void);
@@ -70,7 +30,7 @@
extern int pager_in_use(void);
extern int pager_use_color;
-extern bool use_browser;
+extern int use_browser;
#ifdef NO_NEWT_SUPPORT
static inline void setup_browser(void)
@@ -83,9 +43,6 @@
void exit_browser(bool wait_for_ok);
#endif
-extern const char *editor_program;
-extern const char *excludes_file;
-
char *alias_lookup(const char *alias);
int split_cmdline(char *cmdline, const char ***argv);
@@ -115,22 +72,12 @@
return path[0] == '/';
}
-const char *make_absolute_path(const char *path);
const char *make_nonrelative_path(const char *path);
-const char *make_relative_path(const char *abs, const char *base);
-int normalize_path_copy(char *dst, const char *src);
-int longest_ancestor_length(const char *path, const char *prefix_list);
char *strip_path_suffix(const char *path, const char *suffix);
extern char *mkpath(const char *fmt, ...) __attribute__((format (printf, 1, 2)));
extern char *perf_path(const char *fmt, ...) __attribute__((format (printf, 1, 2)));
-/* perf_mkstemp() - create tmp file honoring TMPDIR variable */
-extern int perf_mkstemp(char *path, size_t len, const char *template);
-extern char *mksnpath(char *buf, size_t n, const char *fmt, ...)
- __attribute__((format (printf, 3, 4)));
-extern char *perf_snpath(char *buf, size_t n, const char *fmt, ...)
- __attribute__((format (printf, 3, 4)));
extern char *perf_pathdup(const char *fmt, ...)
__attribute__((format (printf, 1, 2)));
diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c
index 21a52e0..52c777e 100644
--- a/tools/perf/util/callchain.c
+++ b/tools/perf/util/callchain.c
@@ -15,6 +15,7 @@
#include <errno.h>
#include <math.h>
+#include "util.h"
#include "callchain.h"
bool ip_callchain__valid(struct ip_callchain *chain, event_t *event)
@@ -229,7 +230,7 @@
static void
add_child(struct callchain_node *parent, struct resolved_chain *chain,
- int start)
+ int start, u64 period)
{
struct callchain_node *new;
@@ -237,7 +238,7 @@
fill_node(new, chain, start);
new->children_hit = 0;
- new->hit = 1;
+ new->hit = period;
}
/*
@@ -247,7 +248,8 @@
*/
static void
split_add_child(struct callchain_node *parent, struct resolved_chain *chain,
- struct callchain_list *to_split, int idx_parents, int idx_local)
+ struct callchain_list *to_split, int idx_parents, int idx_local,
+ u64 period)
{
struct callchain_node *new;
struct list_head *old_tail;
@@ -274,41 +276,41 @@
/* create a new child for the new branch if any */
if (idx_total < chain->nr) {
parent->hit = 0;
- add_child(parent, chain, idx_total);
- parent->children_hit++;
+ add_child(parent, chain, idx_total, period);
+ parent->children_hit += period;
} else {
- parent->hit = 1;
+ parent->hit = period;
}
}
static int
__append_chain(struct callchain_node *root, struct resolved_chain *chain,
- unsigned int start);
+ unsigned int start, u64 period);
static void
__append_chain_children(struct callchain_node *root,
struct resolved_chain *chain,
- unsigned int start)
+ unsigned int start, u64 period)
{
struct callchain_node *rnode;
/* lookup in childrens */
chain_for_each_child(rnode, root) {
- unsigned int ret = __append_chain(rnode, chain, start);
+ unsigned int ret = __append_chain(rnode, chain, start, period);
if (!ret)
goto inc_children_hit;
}
/* nothing in children, add to the current node */
- add_child(root, chain, start);
+ add_child(root, chain, start, period);
inc_children_hit:
- root->children_hit++;
+ root->children_hit += period;
}
static int
__append_chain(struct callchain_node *root, struct resolved_chain *chain,
- unsigned int start)
+ unsigned int start, u64 period)
{
struct callchain_list *cnode;
unsigned int i = start;
@@ -344,18 +346,18 @@
/* we match only a part of the node. Split it and add the new chain */
if (i - start < root->val_nr) {
- split_add_child(root, chain, cnode, start, i - start);
+ split_add_child(root, chain, cnode, start, i - start, period);
return 0;
}
/* we match 100% of the path, increment the hit */
if (i - start == root->val_nr && i == chain->nr) {
- root->hit++;
+ root->hit += period;
return 0;
}
/* We match the node and still have a part remaining */
- __append_chain_children(root, chain, i);
+ __append_chain_children(root, chain, i, period);
return 0;
}
@@ -379,7 +381,7 @@
int append_chain(struct callchain_node *root, struct ip_callchain *chain,
- struct map_symbol *syms)
+ struct map_symbol *syms, u64 period)
{
struct resolved_chain *filtered;
@@ -396,7 +398,7 @@
if (!filtered->nr)
goto end;
- __append_chain_children(root, filtered, 0);
+ __append_chain_children(root, filtered, 0, period);
end:
free(filtered);
diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h
index 1cba1f5..f2e9ee1 100644
--- a/tools/perf/util/callchain.h
+++ b/tools/perf/util/callchain.h
@@ -5,7 +5,6 @@
#include <linux/list.h>
#include <linux/rbtree.h>
#include "event.h"
-#include "util.h"
#include "symbol.h"
enum chain_mode {
@@ -50,6 +49,9 @@
INIT_LIST_HEAD(&node->brothers);
INIT_LIST_HEAD(&node->children);
INIT_LIST_HEAD(&node->val);
+
+ node->parent = NULL;
+ node->hit = 0;
}
static inline u64 cumul_hits(struct callchain_node *node)
@@ -59,7 +61,7 @@
int register_callchain_param(struct callchain_param *param);
int append_chain(struct callchain_node *root, struct ip_callchain *chain,
- struct map_symbol *syms);
+ struct map_symbol *syms, u64 period);
bool ip_callchain__valid(struct ip_callchain *chain, event_t *event);
#endif /* __PERF_CALLCHAIN_H */
diff --git a/tools/perf/util/config.c b/tools/perf/util/config.c
index 8784649..dabe892 100644
--- a/tools/perf/util/config.c
+++ b/tools/perf/util/config.c
@@ -16,7 +16,7 @@
static int config_linenr;
static int config_file_eof;
-const char *config_exclusive_filename = NULL;
+static const char *config_exclusive_filename;
static int get_next_char(void)
{
@@ -291,19 +291,6 @@
return 0;
}
-int perf_parse_ulong(const char *value, unsigned long *ret)
-{
- if (value && *value) {
- char *end;
- unsigned long val = strtoul(value, &end, 0);
- if (!parse_unit_factor(end, &val))
- return 0;
- *ret = val;
- return 1;
- }
- return 0;
-}
-
static void die_bad_config(const char *name)
{
if (config_file_name)
@@ -319,15 +306,7 @@
return ret;
}
-unsigned long perf_config_ulong(const char *name, const char *value)
-{
- unsigned long ret;
- if (!perf_parse_ulong(value, &ret))
- die_bad_config(name);
- return ret;
-}
-
-int perf_config_bool_or_int(const char *name, const char *value, int *is_bool)
+static int perf_config_bool_or_int(const char *name, const char *value, int *is_bool)
{
*is_bool = 1;
if (!value)
@@ -348,14 +327,6 @@
return !!perf_config_bool_or_int(name, value, &discard);
}
-int perf_config_string(const char **dest, const char *var, const char *value)
-{
- if (!value)
- return config_error_nonbool(var);
- *dest = strdup(value);
- return 0;
-}
-
static int perf_default_core_config(const char *var __used, const char *value __used)
{
/* Add other config variables here and to Documentation/config.txt. */
@@ -371,7 +342,7 @@
return 0;
}
-int perf_config_from_file(config_fn_t fn, const char *filename, void *data)
+static int perf_config_from_file(config_fn_t fn, const char *filename, void *data)
{
int ret;
FILE *f = fopen(filename, "r");
@@ -389,7 +360,7 @@
return ret;
}
-const char *perf_etc_perfconfig(void)
+static const char *perf_etc_perfconfig(void)
{
static const char *system_wide;
if (!system_wide)
@@ -403,12 +374,12 @@
return v ? perf_config_bool(k, v) : def;
}
-int perf_config_system(void)
+static int perf_config_system(void)
{
return !perf_env_bool("PERF_CONFIG_NOSYSTEM", 0);
}
-int perf_config_global(void)
+static int perf_config_global(void)
{
return !perf_env_bool("PERF_CONFIG_NOGLOBAL", 0);
}
@@ -450,426 +421,6 @@
}
/*
- * Find all the stuff for perf_config_set() below.
- */
-
-#define MAX_MATCHES 512
-
-static struct {
- int baselen;
- char* key;
- int do_not_match;
- regex_t* value_regex;
- int multi_replace;
- size_t offset[MAX_MATCHES];
- enum { START, SECTION_SEEN, SECTION_END_SEEN, KEY_SEEN } state;
- int seen;
-} store;
-
-static int matches(const char* key, const char* value)
-{
- return !strcmp(key, store.key) &&
- (store.value_regex == NULL ||
- (store.do_not_match ^
- !regexec(store.value_regex, value, 0, NULL, 0)));
-}
-
-static int store_aux(const char* key, const char* value, void *cb __used)
-{
- int section_len;
- const char *ep;
-
- switch (store.state) {
- case KEY_SEEN:
- if (matches(key, value)) {
- if (store.seen == 1 && store.multi_replace == 0) {
- warning("%s has multiple values", key);
- } else if (store.seen >= MAX_MATCHES) {
- error("too many matches for %s", key);
- return 1;
- }
-
- store.offset[store.seen] = ftell(config_file);
- store.seen++;
- }
- break;
- case SECTION_SEEN:
- /*
- * What we are looking for is in store.key (both
- * section and var), and its section part is baselen
- * long. We found key (again, both section and var).
- * We would want to know if this key is in the same
- * section as what we are looking for. We already
- * know we are in the same section as what should
- * hold store.key.
- */
- ep = strrchr(key, '.');
- section_len = ep - key;
-
- if ((section_len != store.baselen) ||
- memcmp(key, store.key, section_len+1)) {
- store.state = SECTION_END_SEEN;
- break;
- }
-
- /*
- * Do not increment matches: this is no match, but we
- * just made sure we are in the desired section.
- */
- store.offset[store.seen] = ftell(config_file);
- /* fallthru */
- case SECTION_END_SEEN:
- case START:
- if (matches(key, value)) {
- store.offset[store.seen] = ftell(config_file);
- store.state = KEY_SEEN;
- store.seen++;
- } else {
- if (strrchr(key, '.') - key == store.baselen &&
- !strncmp(key, store.key, store.baselen)) {
- store.state = SECTION_SEEN;
- store.offset[store.seen] = ftell(config_file);
- }
- }
- default:
- break;
- }
- return 0;
-}
-
-static int store_write_section(int fd, const char* key)
-{
- const char *dot;
- int i, success;
- struct strbuf sb = STRBUF_INIT;
-
- dot = memchr(key, '.', store.baselen);
- if (dot) {
- strbuf_addf(&sb, "[%.*s \"", (int)(dot - key), key);
- for (i = dot - key + 1; i < store.baselen; i++) {
- if (key[i] == '"' || key[i] == '\\')
- strbuf_addch(&sb, '\\');
- strbuf_addch(&sb, key[i]);
- }
- strbuf_addstr(&sb, "\"]\n");
- } else {
- strbuf_addf(&sb, "[%.*s]\n", store.baselen, key);
- }
-
- success = (write_in_full(fd, sb.buf, sb.len) == (ssize_t)sb.len);
- strbuf_release(&sb);
-
- return success;
-}
-
-static int store_write_pair(int fd, const char* key, const char* value)
-{
- int i, success;
- int length = strlen(key + store.baselen + 1);
- const char *quote = "";
- struct strbuf sb = STRBUF_INIT;
-
- /*
- * Check to see if the value needs to be surrounded with a dq pair.
- * Note that problematic characters are always backslash-quoted; this
- * check is about not losing leading or trailing SP and strings that
- * follow beginning-of-comment characters (i.e. ';' and '#') by the
- * configuration parser.
- */
- if (value[0] == ' ')
- quote = "\"";
- for (i = 0; value[i]; i++)
- if (value[i] == ';' || value[i] == '#')
- quote = "\"";
- if (i && value[i - 1] == ' ')
- quote = "\"";
-
- strbuf_addf(&sb, "\t%.*s = %s",
- length, key + store.baselen + 1, quote);
-
- for (i = 0; value[i]; i++)
- switch (value[i]) {
- case '\n':
- strbuf_addstr(&sb, "\\n");
- break;
- case '\t':
- strbuf_addstr(&sb, "\\t");
- break;
- case '"':
- case '\\':
- strbuf_addch(&sb, '\\');
- default:
- strbuf_addch(&sb, value[i]);
- break;
- }
- strbuf_addf(&sb, "%s\n", quote);
-
- success = (write_in_full(fd, sb.buf, sb.len) == (ssize_t)sb.len);
- strbuf_release(&sb);
-
- return success;
-}
-
-static ssize_t find_beginning_of_line(const char* contents, size_t size,
- size_t offset_, int* found_bracket)
-{
- size_t equal_offset = size, bracket_offset = size;
- ssize_t offset;
-
-contline:
- for (offset = offset_-2; offset > 0
- && contents[offset] != '\n'; offset--)
- switch (contents[offset]) {
- case '=': equal_offset = offset; break;
- case ']': bracket_offset = offset; break;
- default: break;
- }
- if (offset > 0 && contents[offset-1] == '\\') {
- offset_ = offset;
- goto contline;
- }
- if (bracket_offset < equal_offset) {
- *found_bracket = 1;
- offset = bracket_offset+1;
- } else
- offset++;
-
- return offset;
-}
-
-int perf_config_set(const char* key, const char* value)
-{
- return perf_config_set_multivar(key, value, NULL, 0);
-}
-
-/*
- * If value==NULL, unset in (remove from) config,
- * if value_regex!=NULL, disregard key/value pairs where value does not match.
- * if multi_replace==0, nothing, or only one matching key/value is replaced,
- * else all matching key/values (regardless how many) are removed,
- * before the new pair is written.
- *
- * Returns 0 on success.
- *
- * This function does this:
- *
- * - it locks the config file by creating ".perf/config.lock"
- *
- * - it then parses the config using store_aux() as validator to find
- * the position on the key/value pair to replace. If it is to be unset,
- * it must be found exactly once.
- *
- * - the config file is mmap()ed and the part before the match (if any) is
- * written to the lock file, then the changed part and the rest.
- *
- * - the config file is removed and the lock file rename()d to it.
- *
- */
-int perf_config_set_multivar(const char* key, const char* value,
- const char* value_regex, int multi_replace)
-{
- int i, dot;
- int fd = -1, in_fd;
- int ret = 0;
- char* config_filename;
- const char* last_dot = strrchr(key, '.');
-
- if (config_exclusive_filename)
- config_filename = strdup(config_exclusive_filename);
- else
- config_filename = perf_pathdup("config");
-
- /*
- * Since "key" actually contains the section name and the real
- * key name separated by a dot, we have to know where the dot is.
- */
-
- if (last_dot == NULL) {
- error("key does not contain a section: %s", key);
- ret = 2;
- goto out_free;
- }
- store.baselen = last_dot - key;
-
- store.multi_replace = multi_replace;
-
- /*
- * Validate the key and while at it, lower case it for matching.
- */
- store.key = malloc(strlen(key) + 1);
- dot = 0;
- for (i = 0; key[i]; i++) {
- unsigned char c = key[i];
- if (c == '.')
- dot = 1;
- /* Leave the extended basename untouched.. */
- if (!dot || i > store.baselen) {
- if (!iskeychar(c) || (i == store.baselen+1 && !isalpha(c))) {
- error("invalid key: %s", key);
- free(store.key);
- ret = 1;
- goto out_free;
- }
- c = tolower(c);
- } else if (c == '\n') {
- error("invalid key (newline): %s", key);
- free(store.key);
- ret = 1;
- goto out_free;
- }
- store.key[i] = c;
- }
- store.key[i] = 0;
-
- /*
- * If .perf/config does not exist yet, write a minimal version.
- */
- in_fd = open(config_filename, O_RDONLY);
- if ( in_fd < 0 ) {
- free(store.key);
-
- if ( ENOENT != errno ) {
- error("opening %s: %s", config_filename,
- strerror(errno));
- ret = 3; /* same as "invalid config file" */
- goto out_free;
- }
- /* if nothing to unset, error out */
- if (value == NULL) {
- ret = 5;
- goto out_free;
- }
-
- store.key = (char*)key;
- if (!store_write_section(fd, key) ||
- !store_write_pair(fd, key, value))
- goto write_err_out;
- } else {
- struct stat st;
- char *contents;
- ssize_t contents_sz, copy_begin, copy_end;
- int new_line = 0;
-
- if (value_regex == NULL)
- store.value_regex = NULL;
- else {
- if (value_regex[0] == '!') {
- store.do_not_match = 1;
- value_regex++;
- } else
- store.do_not_match = 0;
-
- store.value_regex = (regex_t*)malloc(sizeof(regex_t));
- if (regcomp(store.value_regex, value_regex,
- REG_EXTENDED)) {
- error("invalid pattern: %s", value_regex);
- free(store.value_regex);
- ret = 6;
- goto out_free;
- }
- }
-
- store.offset[0] = 0;
- store.state = START;
- store.seen = 0;
-
- /*
- * After this, store.offset will contain the *end* offset
- * of the last match, or remain at 0 if no match was found.
- * As a side effect, we make sure to transform only a valid
- * existing config file.
- */
- if (perf_config_from_file(store_aux, config_filename, NULL)) {
- error("invalid config file %s", config_filename);
- free(store.key);
- if (store.value_regex != NULL) {
- regfree(store.value_regex);
- free(store.value_regex);
- }
- ret = 3;
- goto out_free;
- }
-
- free(store.key);
- if (store.value_regex != NULL) {
- regfree(store.value_regex);
- free(store.value_regex);
- }
-
- /* if nothing to unset, or too many matches, error out */
- if ((store.seen == 0 && value == NULL) ||
- (store.seen > 1 && multi_replace == 0)) {
- ret = 5;
- goto out_free;
- }
-
- fstat(in_fd, &st);
- contents_sz = xsize_t(st.st_size);
- contents = mmap(NULL, contents_sz, PROT_READ,
- MAP_PRIVATE, in_fd, 0);
- close(in_fd);
-
- if (store.seen == 0)
- store.seen = 1;
-
- for (i = 0, copy_begin = 0; i < store.seen; i++) {
- if (store.offset[i] == 0) {
- store.offset[i] = copy_end = contents_sz;
- } else if (store.state != KEY_SEEN) {
- copy_end = store.offset[i];
- } else
- copy_end = find_beginning_of_line(
- contents, contents_sz,
- store.offset[i]-2, &new_line);
-
- if (copy_end > 0 && contents[copy_end-1] != '\n')
- new_line = 1;
-
- /* write the first part of the config */
- if (copy_end > copy_begin) {
- if (write_in_full(fd, contents + copy_begin,
- copy_end - copy_begin) <
- copy_end - copy_begin)
- goto write_err_out;
- if (new_line &&
- write_in_full(fd, "\n", 1) != 1)
- goto write_err_out;
- }
- copy_begin = store.offset[i];
- }
-
- /* write the pair (value == NULL means unset) */
- if (value != NULL) {
- if (store.state == START) {
- if (!store_write_section(fd, key))
- goto write_err_out;
- }
- if (!store_write_pair(fd, key, value))
- goto write_err_out;
- }
-
- /* write the rest of the config */
- if (copy_begin < contents_sz)
- if (write_in_full(fd, contents + copy_begin,
- contents_sz - copy_begin) <
- contents_sz - copy_begin)
- goto write_err_out;
-
- munmap(contents, contents_sz);
- }
-
- ret = 0;
-
-out_free:
- free(config_filename);
- return ret;
-
-write_err_out:
- goto out_free;
-
-}
-
-/*
* Call this to report error for your variable that should not
* get a boolean value (i.e. "[my] var" means "true").
*/
diff --git a/tools/perf/util/debug.c b/tools/perf/util/debug.c
index dd824cf..6cddff2 100644
--- a/tools/perf/util/debug.c
+++ b/tools/perf/util/debug.c
@@ -22,7 +22,7 @@
if (verbose >= level) {
va_start(args, fmt);
- if (use_browser)
+ if (use_browser > 0)
ret = browser__show_help(fmt, args);
else
ret = vfprintf(stderr, fmt, args);
diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c
index 50771b5..2fbf6a4 100644
--- a/tools/perf/util/event.c
+++ b/tools/perf/util/event.c
@@ -370,9 +370,9 @@
int event__process_comm(event_t *self, struct perf_session *session)
{
- struct thread *thread = perf_session__findnew(session, self->comm.pid);
+ struct thread *thread = perf_session__findnew(session, self->comm.tid);
- dump_printf(": %s:%d\n", self->comm.comm, self->comm.pid);
+ dump_printf(": %s:%d\n", self->comm.comm, self->comm.tid);
if (thread == NULL || thread__set_comm_adjust(thread, self->comm.comm)) {
dump_printf("problem processing PERF_RECORD_COMM, skipping event.\n");
@@ -532,19 +532,16 @@
int event__process_task(event_t *self, struct perf_session *session)
{
- struct thread *thread = perf_session__findnew(session, self->fork.pid);
- struct thread *parent = perf_session__findnew(session, self->fork.ppid);
+ struct thread *thread = perf_session__findnew(session, self->fork.tid);
+ struct thread *parent = perf_session__findnew(session, self->fork.ptid);
dump_printf("(%d:%d):(%d:%d)\n", self->fork.pid, self->fork.tid,
self->fork.ppid, self->fork.ptid);
- /*
- * A thread clone will have the same PID for both parent and child.
- */
- if (thread == parent)
- return 0;
- if (self->header.type == PERF_RECORD_EXIT)
+ if (self->header.type == PERF_RECORD_EXIT) {
+ perf_session__remove_thread(session, thread);
return 0;
+ }
if (thread == NULL || parent == NULL ||
thread__fork(thread, parent) < 0) {
diff --git a/tools/perf/util/exec_cmd.c b/tools/perf/util/exec_cmd.c
index 2745605..67eeff5 100644
--- a/tools/perf/util/exec_cmd.c
+++ b/tools/perf/util/exec_cmd.c
@@ -53,8 +53,8 @@
slash--;
if (slash >= argv0) {
- argv0_path = xstrndup(argv0, slash - argv0);
- return slash + 1;
+ argv0_path = strndup(argv0, slash - argv0);
+ return argv0_path ? slash + 1 : NULL;
}
return argv0;
@@ -116,7 +116,7 @@
strbuf_release(&new_path);
}
-const char **prepare_perf_cmd(const char **argv)
+static const char **prepare_perf_cmd(const char **argv)
{
int argc;
const char **nargv;
diff --git a/tools/perf/util/exec_cmd.h b/tools/perf/util/exec_cmd.h
index 31647ac..bc4b915 100644
--- a/tools/perf/util/exec_cmd.h
+++ b/tools/perf/util/exec_cmd.h
@@ -5,7 +5,6 @@
extern const char *perf_extract_argv0_path(const char *path);
extern const char *perf_exec_path(void);
extern void setup_path(void);
-extern const char **prepare_perf_cmd(const char **argv);
extern int execv_perf_cmd(const char **argv); /* NULL terminated */
extern int execl_perf_cmd(const char *cmd, ...);
extern const char *system_path(const char *path);
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index 8847bec..1f62435 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -221,29 +221,38 @@
return 0;
}
+static int machine__write_buildid_table(struct machine *self, int fd)
+{
+ int err;
+ u16 kmisc = PERF_RECORD_MISC_KERNEL,
+ umisc = PERF_RECORD_MISC_USER;
+
+ if (!machine__is_host(self)) {
+ kmisc = PERF_RECORD_MISC_GUEST_KERNEL;
+ umisc = PERF_RECORD_MISC_GUEST_USER;
+ }
+
+ err = __dsos__write_buildid_table(&self->kernel_dsos, self->pid,
+ kmisc, fd);
+ if (err == 0)
+ err = __dsos__write_buildid_table(&self->user_dsos,
+ self->pid, umisc, fd);
+ return err;
+}
+
static int dsos__write_buildid_table(struct perf_header *header, int fd)
{
struct perf_session *session = container_of(header,
struct perf_session, header);
struct rb_node *nd;
- int err = 0;
- u16 kmisc, umisc;
+ int err = machine__write_buildid_table(&session->host_machine, fd);
+
+ if (err)
+ return err;
for (nd = rb_first(&session->machines); nd; nd = rb_next(nd)) {
struct machine *pos = rb_entry(nd, struct machine, rb_node);
- if (machine__is_host(pos)) {
- kmisc = PERF_RECORD_MISC_KERNEL;
- umisc = PERF_RECORD_MISC_USER;
- } else {
- kmisc = PERF_RECORD_MISC_GUEST_KERNEL;
- umisc = PERF_RECORD_MISC_GUEST_USER;
- }
-
- err = __dsos__write_buildid_table(&pos->kernel_dsos, pos->pid,
- kmisc, fd);
- if (err == 0)
- err = __dsos__write_buildid_table(&pos->user_dsos,
- pos->pid, umisc, fd);
+ err = machine__write_buildid_table(pos, fd);
if (err)
break;
}
@@ -363,12 +372,17 @@
return err;
}
-static int dsos__cache_build_ids(struct perf_header *self)
+static int machine__cache_build_ids(struct machine *self, const char *debugdir)
{
- struct perf_session *session = container_of(self,
- struct perf_session, header);
+ int ret = __dsos__cache_build_ids(&self->kernel_dsos, debugdir);
+ ret |= __dsos__cache_build_ids(&self->user_dsos, debugdir);
+ return ret;
+}
+
+static int perf_session__cache_build_ids(struct perf_session *self)
+{
struct rb_node *nd;
- int ret = 0;
+ int ret;
char debugdir[PATH_MAX];
snprintf(debugdir, sizeof(debugdir), "%s/%s", getenv("HOME"),
@@ -377,25 +391,30 @@
if (mkdir(debugdir, 0755) != 0 && errno != EEXIST)
return -1;
- for (nd = rb_first(&session->machines); nd; nd = rb_next(nd)) {
+ ret = machine__cache_build_ids(&self->host_machine, debugdir);
+
+ for (nd = rb_first(&self->machines); nd; nd = rb_next(nd)) {
struct machine *pos = rb_entry(nd, struct machine, rb_node);
- ret |= __dsos__cache_build_ids(&pos->kernel_dsos, debugdir);
- ret |= __dsos__cache_build_ids(&pos->user_dsos, debugdir);
+ ret |= machine__cache_build_ids(pos, debugdir);
}
return ret ? -1 : 0;
}
-static bool dsos__read_build_ids(struct perf_header *self, bool with_hits)
+static bool machine__read_build_ids(struct machine *self, bool with_hits)
{
- bool ret = false;
- struct perf_session *session = container_of(self,
- struct perf_session, header);
- struct rb_node *nd;
+ bool ret = __dsos__read_build_ids(&self->kernel_dsos, with_hits);
+ ret |= __dsos__read_build_ids(&self->user_dsos, with_hits);
+ return ret;
+}
- for (nd = rb_first(&session->machines); nd; nd = rb_next(nd)) {
+static bool perf_session__read_build_ids(struct perf_session *self, bool with_hits)
+{
+ struct rb_node *nd;
+ bool ret = machine__read_build_ids(&self->host_machine, with_hits);
+
+ for (nd = rb_first(&self->machines); nd; nd = rb_next(nd)) {
struct machine *pos = rb_entry(nd, struct machine, rb_node);
- ret |= __dsos__read_build_ids(&pos->kernel_dsos, with_hits);
- ret |= __dsos__read_build_ids(&pos->user_dsos, with_hits);
+ ret |= machine__read_build_ids(pos, with_hits);
}
return ret;
@@ -404,12 +423,14 @@
static int perf_header__adds_write(struct perf_header *self, int fd)
{
int nr_sections;
+ struct perf_session *session;
struct perf_file_section *feat_sec;
int sec_size;
u64 sec_start;
int idx = 0, err;
- if (dsos__read_build_ids(self, true))
+ session = container_of(self, struct perf_session, header);
+ if (perf_session__read_build_ids(session, true))
perf_header__set_feat(self, HEADER_BUILD_ID);
nr_sections = bitmap_weight(self->adds_features, HEADER_FEAT_BITS);
@@ -450,7 +471,7 @@
}
buildid_sec->size = lseek(fd, 0, SEEK_CUR) -
buildid_sec->offset;
- dsos__cache_build_ids(self);
+ perf_session__cache_build_ids(session);
}
lseek(fd, sec_start, SEEK_SET);
@@ -490,7 +511,6 @@
lseek(fd, sizeof(f_header), SEEK_SET);
-
for (i = 0; i < self->attrs; i++) {
attr = self->attr[i];
diff --git a/tools/perf/util/help.c b/tools/perf/util/help.c
index fbb0097..6f2975a 100644
--- a/tools/perf/util/help.c
+++ b/tools/perf/util/help.c
@@ -4,28 +4,6 @@
#include "levenshtein.h"
#include "help.h"
-/* most GUI terminals set COLUMNS (although some don't export it) */
-static int term_columns(void)
-{
- char *col_string = getenv("COLUMNS");
- int n_cols;
-
- if (col_string && (n_cols = atoi(col_string)) > 0)
- return n_cols;
-
-#ifdef TIOCGWINSZ
- {
- struct winsize ws;
- if (!ioctl(1, TIOCGWINSZ, &ws)) {
- if (ws.ws_col)
- return ws.ws_col;
- }
- }
-#endif
-
- return 80;
-}
-
void add_cmdname(struct cmdnames *cmds, const char *name, size_t len)
{
struct cmdname *ent = malloc(sizeof(*ent) + len + 1);
@@ -96,9 +74,13 @@
{
int cols = 1, rows;
int space = longest + 1; /* min 1 SP between words */
- int max_cols = term_columns() - 1; /* don't print *on* the edge */
+ struct winsize win;
+ int max_cols;
int i, j;
+ get_term_dimensions(&win);
+ max_cols = win.ws_col - 1; /* don't print *on* the edge */
+
if (space < max_cols)
cols = max_cols / space;
rows = (cmds->cnt + cols - 1) / cols;
@@ -324,7 +306,7 @@
main_cmds.names[0] = NULL;
clean_cmdnames(&main_cmds);
- fprintf(stderr, "WARNING: You called a Git program named '%s', "
+ fprintf(stderr, "WARNING: You called a perf program named '%s', "
"which does not exist.\n"
"Continuing under the assumption that you meant '%s'\n",
cmd, assumed);
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index 9a71c94..07f89b6 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -1,4 +1,5 @@
#include "util.h"
+#include "build-id.h"
#include "hist.h"
#include "session.h"
#include "sort.h"
@@ -964,7 +965,7 @@
* Parse hexa addresses followed by ':'
*/
line_ip = strtoull(tmp, &tmp2, 16);
- if (*tmp2 != ':')
+ if (*tmp2 != ':' || tmp == tmp2)
line_ip = -1;
}
@@ -988,22 +989,42 @@
struct symbol *sym = self->ms.sym;
struct map *map = self->ms.map;
struct dso *dso = map->dso;
- const char *filename = dso->long_name;
+ char *filename = dso__build_id_filename(dso, NULL, 0);
+ bool free_filename = true;
char command[PATH_MAX * 2];
FILE *file;
+ int err = 0;
u64 len;
- if (!filename)
- return -1;
+ if (filename == NULL) {
+ if (dso->has_build_id) {
+ pr_err("Can't annotate %s: not enough memory\n",
+ sym->name);
+ return -ENOMEM;
+ }
+ goto fallback;
+ } else if (readlink(filename, command, sizeof(command)) < 0 ||
+ strstr(command, "[kernel.kallsyms]") ||
+ access(filename, R_OK)) {
+ free(filename);
+fallback:
+ /*
+ * If we don't have build-ids or the build-id file isn't in the
+ * cache, or is just a kallsyms file, well, lets hope that this
+ * DSO is the same as when 'perf record' ran.
+ */
+ filename = dso->long_name;
+ free_filename = false;
+ }
if (dso->origin == DSO__ORIG_KERNEL) {
if (dso->annotate_warned)
- return 0;
+ goto out_free_filename;
+ err = -ENOENT;
dso->annotate_warned = 1;
pr_err("Can't annotate %s: No vmlinux file was found in the "
- "path:\n", sym->name);
- vmlinux_path__fprintf(stderr);
- return -1;
+ "path\n", sym->name);
+ goto out_free_filename;
}
pr_debug("%s: filename=%s, sym=%s, start=%#Lx, end=%#Lx\n", __func__,
@@ -1025,14 +1046,17 @@
file = popen(command, "r");
if (!file)
- return -1;
+ goto out_free_filename;
while (!feof(file))
if (hist_entry__parse_objdump_line(self, file, head) < 0)
break;
pclose(file);
- return 0;
+out_free_filename:
+ if (free_filename)
+ free(filename);
+ return err;
}
void hists__inc_nr_events(struct hists *self, u32 type)
diff --git a/tools/perf/util/hist.h b/tools/perf/util/hist.h
index 6f17dcd..83fa33a 100644
--- a/tools/perf/util/hist.h
+++ b/tools/perf/util/hist.h
@@ -98,12 +98,32 @@
#ifdef NO_NEWT_SUPPORT
static inline int hists__browse(struct hists *self __used,
const char *helpline __used,
- const char *input_name __used)
+ const char *ev_name __used)
{
return 0;
}
+
+static inline int hists__tui_browse_tree(struct rb_root *self __used,
+ const char *help __used)
+{
+ return 0;
+}
+
+static inline int hist_entry__tui_annotate(struct hist_entry *self __used)
+{
+ return 0;
+}
+#define KEY_LEFT -1
+#define KEY_RIGHT -2
#else
+#include <newt.h>
int hists__browse(struct hists *self, const char *helpline,
- const char *input_name);
+ const char *ev_name);
+int hist_entry__tui_annotate(struct hist_entry *self);
+
+#define KEY_LEFT NEWT_KEY_LEFT
+#define KEY_RIGHT NEWT_KEY_RIGHT
+
+int hists__tui_browse_tree(struct rb_root *self, const char *help);
#endif
#endif /* __PERF_HIST_H */
diff --git a/tools/perf/util/newt.c b/tools/perf/util/newt.c
index ccb7c5b..7537ca1 100644
--- a/tools/perf/util/newt.c
+++ b/tools/perf/util/newt.c
@@ -1,7 +1,15 @@
#define _GNU_SOURCE
#include <stdio.h>
#undef _GNU_SOURCE
-
+/*
+ * slang versions <= 2.0.6 have a "#if HAVE_LONG_LONG" that breaks
+ * the build if it isn't defined. Use the equivalent one that glibc
+ * has on features.h.
+ */
+#include <features.h>
+#ifndef HAVE_LONG_LONG
+#define HAVE_LONG_LONG __GLIBC_HAVE_LONG_LONG
+#endif
#include <slang.h>
#include <stdlib.h>
#include <newt.h>
@@ -35,6 +43,9 @@
if (self != NULL) {
int cols;
+
+ if (use_browser <= 0)
+ return self;
newtGetScreenSize(&cols, NULL);
cols -= 4;
newtCenteredWindow(cols, 1, title);
@@ -59,14 +70,22 @@
void ui_progress__update(struct ui_progress *self, u64 curr)
{
+ /*
+ * FIXME: We should have a per UI backend way of showing progress,
+ * stdio will just show a percentage as NN%, etc.
+ */
+ if (use_browser <= 0)
+ return;
newtScaleSet(self->scale, curr);
newtRefresh();
}
void ui_progress__delete(struct ui_progress *self)
{
- newtFormDestroy(self->form);
- newtPopWindow();
+ if (use_browser > 0) {
+ newtFormDestroy(self->form);
+ newtPopWindow();
+ }
free(self);
}
@@ -227,6 +246,15 @@
return newtWinChoice(NULL, yes, no, (char *)msg) == 1;
}
+static void ui__error_window(const char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ newtWinMessagev((char *)"Error", (char *)"Ok", (char *)fmt, ap);
+ va_end(ap);
+}
+
#define HE_COLORSET_TOP 50
#define HE_COLORSET_MEDIUM 51
#define HE_COLORSET_NORMAL 52
@@ -375,8 +403,11 @@
newtFormAddHotKey(self->form, NEWT_KEY_DOWN);
newtFormAddHotKey(self->form, NEWT_KEY_PGUP);
newtFormAddHotKey(self->form, NEWT_KEY_PGDN);
+ newtFormAddHotKey(self->form, ' ');
newtFormAddHotKey(self->form, NEWT_KEY_HOME);
newtFormAddHotKey(self->form, NEWT_KEY_END);
+ newtFormAddHotKey(self->form, NEWT_KEY_TAB);
+ newtFormAddHotKey(self->form, NEWT_KEY_RIGHT);
if (ui_browser__refresh_entries(self) < 0)
return -1;
@@ -389,6 +420,8 @@
if (es->reason != NEWT_EXIT_HOTKEY)
break;
+ if (is_exit_key(es->u.key))
+ return es->u.key;
switch (es->u.key) {
case NEWT_KEY_DOWN:
if (self->index == self->nr_entries - 1)
@@ -411,6 +444,7 @@
}
break;
case NEWT_KEY_PGDN:
+ case ' ':
if (self->first_visible_entry_idx + self->height > self->nr_entries - 1)
break;
@@ -461,12 +495,10 @@
}
}
break;
- case NEWT_KEY_ESCAPE:
+ case NEWT_KEY_RIGHT:
case NEWT_KEY_LEFT:
- case CTRL('c'):
- case 'Q':
- case 'q':
- return 0;
+ case NEWT_KEY_TAB:
+ return es->u.key;
default:
continue;
}
@@ -658,18 +690,24 @@
return ret;
}
-static void hist_entry__annotate_browser(struct hist_entry *self)
+int hist_entry__tui_annotate(struct hist_entry *self)
{
struct ui_browser browser;
struct newtExitStruct es;
struct objdump_line *pos, *n;
LIST_HEAD(head);
+ int ret;
if (self->ms.sym == NULL)
- return;
+ return -1;
- if (hist_entry__annotate(self, &head) < 0)
- return;
+ if (self->ms.map->dso->annotate_warned)
+ return -1;
+
+ if (hist_entry__annotate(self, &head) < 0) {
+ ui__error_window(browser__last_msg);
+ return -1;
+ }
ui_helpline__push("Press <- or ESC to exit");
@@ -684,7 +722,7 @@
}
browser.width += 18; /* Percentage */
- ui_browser__run(&browser, self->ms.sym->name, &es);
+ ret = ui_browser__run(&browser, self->ms.sym->name, &es);
newtFormDestroy(browser.form);
newtPopWindow();
list_for_each_entry_safe(pos, n, &head, node) {
@@ -692,6 +730,7 @@
objdump_line__free(pos);
}
ui_helpline__pop();
+ return ret;
}
static const void *newt__symbol_tree_get_current(newtComponent self)
@@ -814,6 +853,8 @@
newtFormAddHotKey(self->form, 'h');
newtFormAddHotKey(self->form, NEWT_KEY_F1);
newtFormAddHotKey(self->form, NEWT_KEY_RIGHT);
+ newtFormAddHotKey(self->form, NEWT_KEY_TAB);
+ newtFormAddHotKey(self->form, NEWT_KEY_UNTAB);
newtFormAddComponents(self->form, self->tree, NULL);
self->selection = newt__symbol_tree_get_current(self->tree);
@@ -845,7 +886,7 @@
return he ? he->thread : NULL;
}
-static int hist_browser__title(char *bf, size_t size, const char *input_name,
+static int hist_browser__title(char *bf, size_t size, const char *ev_name,
const struct dso *dso, const struct thread *thread)
{
int printed = 0;
@@ -859,18 +900,18 @@
printed += snprintf(bf + printed, size - printed,
"%sDSO: %s", thread ? " " : "",
dso->short_name);
- return printed ?: snprintf(bf, size, "Report: %s", input_name);
+ return printed ?: snprintf(bf, size, "Event: %s", ev_name);
}
-int hists__browse(struct hists *self, const char *helpline, const char *input_name)
+int hists__browse(struct hists *self, const char *helpline, const char *ev_name)
{
struct hist_browser *browser = hist_browser__new();
- struct pstack *fstack = pstack__new(2);
+ struct pstack *fstack;
const struct thread *thread_filter = NULL;
const struct dso *dso_filter = NULL;
struct newtExitStruct es;
char msg[160];
- int err = -1;
+ int key = -1;
if (browser == NULL)
return -1;
@@ -881,7 +922,7 @@
ui_helpline__push(helpline);
- hist_browser__title(msg, sizeof(msg), input_name,
+ hist_browser__title(msg, sizeof(msg), ev_name,
dso_filter, thread_filter);
if (hist_browser__populate(browser, self, msg) < 0)
goto out_free_stack;
@@ -899,11 +940,27 @@
dso = browser->selection->map ? browser->selection->map->dso : NULL;
if (es.reason == NEWT_EXIT_HOTKEY) {
- if (es.u.key == NEWT_KEY_F1)
- goto do_help;
+ key = es.u.key;
- switch (toupper(es.u.key)) {
+ switch (key) {
+ case NEWT_KEY_F1:
+ goto do_help;
+ case NEWT_KEY_TAB:
+ case NEWT_KEY_UNTAB:
+ /*
+ * Exit the browser, let hists__browser_tree
+ * go to the next or previous
+ */
+ goto out_free_stack;
+ default:;
+ }
+
+ key = toupper(key);
+ switch (key) {
case 'A':
+ if (browser->selection->map == NULL &&
+ browser->selection->map->dso->annotate_warned)
+ continue;
goto do_annotate;
case 'D':
goto zoom_dso;
@@ -922,14 +979,14 @@
continue;
default:;
}
- if (toupper(es.u.key) == 'Q' ||
- es.u.key == CTRL('c'))
- break;
- if (es.u.key == NEWT_KEY_ESCAPE) {
- if (dialog_yesno("Do you really want to exit?"))
+ if (is_exit_key(key)) {
+ if (key == NEWT_KEY_ESCAPE) {
+ if (dialog_yesno("Do you really want to exit?"))
+ break;
+ else
+ continue;
+ } else
break;
- else
- continue;
}
if (es.u.key == NEWT_KEY_LEFT) {
@@ -947,6 +1004,7 @@
}
if (browser->selection->sym != NULL &&
+ !browser->selection->map->dso->annotate_warned &&
asprintf(&options[nr_options], "Annotate %s",
browser->selection->sym->name) > 0)
annotate = nr_options++;
@@ -981,6 +1039,7 @@
struct hist_entry *he;
do_annotate:
if (browser->selection->map->dso->origin == DSO__ORIG_KERNEL) {
+ browser->selection->map->dso->annotate_warned = 1;
ui_helpline__puts("No vmlinux file found, can't "
"annotate with just a "
"kallsyms file");
@@ -991,7 +1050,7 @@
if (he == NULL)
continue;
- hist_entry__annotate_browser(he);
+ hist_entry__tui_annotate(he);
} else if (choice == zoom_dso) {
zoom_dso:
if (dso_filter) {
@@ -1008,7 +1067,7 @@
pstack__push(fstack, &dso_filter);
}
hists__filter_by_dso(self, dso_filter);
- hist_browser__title(msg, sizeof(msg), input_name,
+ hist_browser__title(msg, sizeof(msg), ev_name,
dso_filter, thread_filter);
if (hist_browser__populate(browser, self, msg) < 0)
goto out;
@@ -1027,18 +1086,49 @@
pstack__push(fstack, &thread_filter);
}
hists__filter_by_thread(self, thread_filter);
- hist_browser__title(msg, sizeof(msg), input_name,
+ hist_browser__title(msg, sizeof(msg), ev_name,
dso_filter, thread_filter);
if (hist_browser__populate(browser, self, msg) < 0)
goto out;
}
}
- err = 0;
out_free_stack:
pstack__delete(fstack);
out:
hist_browser__delete(browser);
- return err;
+ return key;
+}
+
+int hists__tui_browse_tree(struct rb_root *self, const char *help)
+{
+ struct rb_node *first = rb_first(self), *nd = first, *next;
+ int key = 0;
+
+ while (nd) {
+ struct hists *hists = rb_entry(nd, struct hists, rb_node);
+ const char *ev_name = __event_name(hists->type, hists->config);
+
+ key = hists__browse(hists, help, ev_name);
+
+ if (is_exit_key(key))
+ break;
+
+ switch (key) {
+ case NEWT_KEY_TAB:
+ next = rb_next(nd);
+ if (next)
+ nd = next;
+ break;
+ case NEWT_KEY_UNTAB:
+ if (nd == first)
+ continue;
+ nd = rb_prev(nd);
+ default:
+ break;
+ }
+ }
+
+ return key;
}
static struct newtPercentTreeColors {
@@ -1058,10 +1148,14 @@
void setup_browser(void)
{
struct newtPercentTreeColors *c = &defaultPercentTreeColors;
- if (!isatty(1))
- return;
- use_browser = true;
+ if (!isatty(1) || !use_browser || dump_trace) {
+ use_browser = 0;
+ setup_pager();
+ return;
+ }
+
+ use_browser = 1;
newtInit();
newtCls();
ui_helpline__puts(" ");
@@ -1074,7 +1168,7 @@
void exit_browser(bool wait_for_ok)
{
- if (use_browser) {
+ if (use_browser > 0) {
if (wait_for_ok) {
char title[] = "Fatal Error", ok[] = "Ok";
newtWinMessage(title, ok, browser__last_msg);
diff --git a/tools/perf/util/path.c b/tools/perf/util/path.c
index fd1f2fa..58a470d 100644
--- a/tools/perf/util/path.c
+++ b/tools/perf/util/path.c
@@ -54,21 +54,6 @@
return path;
}
-char *mksnpath(char *buf, size_t n, const char *fmt, ...)
-{
- va_list args;
- unsigned len;
-
- va_start(args, fmt);
- len = vsnprintf(buf, n, fmt, args);
- va_end(args);
- if (len >= n) {
- strlcpy(buf, bad_path, n);
- return buf;
- }
- return cleanup_path(buf);
-}
-
static char *perf_vsnpath(char *buf, size_t n, const char *fmt, va_list args)
{
const char *perf_dir = get_perf_dir();
@@ -89,15 +74,6 @@
return buf;
}
-char *perf_snpath(char *buf, size_t n, const char *fmt, ...)
-{
- va_list args;
- va_start(args, fmt);
- (void)perf_vsnpath(buf, n, fmt, args);
- va_end(args);
- return buf;
-}
-
char *perf_pathdup(const char *fmt, ...)
{
char path[PATH_MAX];
@@ -143,184 +119,6 @@
return cleanup_path(pathname);
}
-
-/* perf_mkstemp() - create tmp file honoring TMPDIR variable */
-int perf_mkstemp(char *path, size_t len, const char *template)
-{
- const char *tmp;
- size_t n;
-
- tmp = getenv("TMPDIR");
- if (!tmp)
- tmp = "/tmp";
- n = snprintf(path, len, "%s/%s", tmp, template);
- if (len <= n) {
- errno = ENAMETOOLONG;
- return -1;
- }
- return mkstemp(path);
-}
-
-
-const char *make_relative_path(const char *abs_path, const char *base)
-{
- static char buf[PATH_MAX + 1];
- int baselen;
-
- if (!base)
- return abs_path;
-
- baselen = strlen(base);
- if (prefixcmp(abs_path, base))
- return abs_path;
- if (abs_path[baselen] == '/')
- baselen++;
- else if (base[baselen - 1] != '/')
- return abs_path;
-
- strcpy(buf, abs_path + baselen);
-
- return buf;
-}
-
-/*
- * It is okay if dst == src, but they should not overlap otherwise.
- *
- * Performs the following normalizations on src, storing the result in dst:
- * - Ensures that components are separated by '/' (Windows only)
- * - Squashes sequences of '/'.
- * - Removes "." components.
- * - Removes ".." components, and the components the precede them.
- * Returns failure (non-zero) if a ".." component appears as first path
- * component anytime during the normalization. Otherwise, returns success (0).
- *
- * Note that this function is purely textual. It does not follow symlinks,
- * verify the existence of the path, or make any system calls.
- */
-int normalize_path_copy(char *dst, const char *src)
-{
- char *dst0;
-
- if (has_dos_drive_prefix(src)) {
- *dst++ = *src++;
- *dst++ = *src++;
- }
- dst0 = dst;
-
- if (is_dir_sep(*src)) {
- *dst++ = '/';
- while (is_dir_sep(*src))
- src++;
- }
-
- for (;;) {
- char c = *src;
-
- /*
- * A path component that begins with . could be
- * special:
- * (1) "." and ends -- ignore and terminate.
- * (2) "./" -- ignore them, eat slash and continue.
- * (3) ".." and ends -- strip one and terminate.
- * (4) "../" -- strip one, eat slash and continue.
- */
- if (c == '.') {
- if (!src[1]) {
- /* (1) */
- src++;
- } else if (is_dir_sep(src[1])) {
- /* (2) */
- src += 2;
- while (is_dir_sep(*src))
- src++;
- continue;
- } else if (src[1] == '.') {
- if (!src[2]) {
- /* (3) */
- src += 2;
- goto up_one;
- } else if (is_dir_sep(src[2])) {
- /* (4) */
- src += 3;
- while (is_dir_sep(*src))
- src++;
- goto up_one;
- }
- }
- }
-
- /* copy up to the next '/', and eat all '/' */
- while ((c = *src++) != '\0' && !is_dir_sep(c))
- *dst++ = c;
- if (is_dir_sep(c)) {
- *dst++ = '/';
- while (is_dir_sep(c))
- c = *src++;
- src--;
- } else if (!c)
- break;
- continue;
-
- up_one:
- /*
- * dst0..dst is prefix portion, and dst[-1] is '/';
- * go up one level.
- */
- dst--; /* go to trailing '/' */
- if (dst <= dst0)
- return -1;
- /* Windows: dst[-1] cannot be backslash anymore */
- while (dst0 < dst && dst[-1] != '/')
- dst--;
- }
- *dst = '\0';
- return 0;
-}
-
-/*
- * path = Canonical absolute path
- * prefix_list = Colon-separated list of absolute paths
- *
- * Determines, for each path in prefix_list, whether the "prefix" really
- * is an ancestor directory of path. Returns the length of the longest
- * ancestor directory, excluding any trailing slashes, or -1 if no prefix
- * is an ancestor. (Note that this means 0 is returned if prefix_list is
- * "/".) "/foo" is not considered an ancestor of "/foobar". Directories
- * are not considered to be their own ancestors. path must be in a
- * canonical form: empty components, or "." or ".." components are not
- * allowed. prefix_list may be null, which is like "".
- */
-int longest_ancestor_length(const char *path, const char *prefix_list)
-{
- char buf[PATH_MAX+1];
- const char *ceil, *colon;
- int len, max_len = -1;
-
- if (prefix_list == NULL || !strcmp(path, "/"))
- return -1;
-
- for (colon = ceil = prefix_list; *colon; ceil = colon+1) {
- for (colon = ceil; *colon && *colon != PATH_SEP; colon++);
- len = colon - ceil;
- if (len == 0 || len > PATH_MAX || !is_absolute_path(ceil))
- continue;
- strlcpy(buf, ceil, len+1);
- if (normalize_path_copy(buf, buf) < 0)
- continue;
- len = strlen(buf);
- if (len > 0 && buf[len-1] == '/')
- buf[--len] = '\0';
-
- if (!strncmp(path, buf, len) &&
- path[len] == '/' &&
- len > max_len) {
- max_len = len;
- }
- }
-
- return max_len;
-}
-
/* strip arbitrary amount of directory separators at end of path */
static inline int chomp_trailing_dir_sep(const char *path, int len)
{
@@ -354,5 +152,5 @@
if (path_len && !is_dir_sep(path[path_len - 1]))
return NULL;
- return xstrndup(path, chomp_trailing_dir_sep(path, path_len));
+ return strndup(path, chomp_trailing_dir_sep(path, path_len));
}
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index 562b144..d964cb1 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -668,6 +668,7 @@
ret = dwarf_getlocation_addr(&fb_attr, pf->addr, &pf->fb_ops, &nops, 1);
if (ret <= 0 || nops == 0) {
pf->fb_ops = NULL;
+#if _ELFUTILS_PREREQ(0, 142)
} else if (nops == 1 && pf->fb_ops[0].atom == DW_OP_call_frame_cfa &&
pf->cfi != NULL) {
Dwarf_Frame *frame;
@@ -677,6 +678,7 @@
(uintmax_t)pf->addr);
return -ENOENT;
}
+#endif
}
/* Find each argument */
@@ -741,32 +743,36 @@
const char *fname, const char *pat)
{
char *fbuf, *p1, *p2;
- int fd, ret, line, nlines = 0;
+ int fd, line, nlines = -1;
struct stat st;
fd = open(fname, O_RDONLY);
if (fd < 0) {
pr_warning("Failed to open %s: %s\n", fname, strerror(-fd));
- return fd;
+ return -errno;
}
- ret = fstat(fd, &st);
- if (ret < 0) {
+ if (fstat(fd, &st) < 0) {
pr_warning("Failed to get the size of %s: %s\n",
fname, strerror(errno));
- return ret;
+ nlines = -errno;
+ goto out_close;
}
- fbuf = xmalloc(st.st_size + 2);
- ret = read(fd, fbuf, st.st_size);
- if (ret < 0) {
+
+ nlines = -ENOMEM;
+ fbuf = malloc(st.st_size + 2);
+ if (fbuf == NULL)
+ goto out_close;
+ if (read(fd, fbuf, st.st_size) < 0) {
pr_warning("Failed to read %s: %s\n", fname, strerror(errno));
- return ret;
+ nlines = -errno;
+ goto out_free_fbuf;
}
- close(fd);
fbuf[st.st_size] = '\n'; /* Dummy line */
fbuf[st.st_size + 1] = '\0';
p1 = fbuf;
line = 1;
+ nlines = 0;
while ((p2 = strchr(p1, '\n')) != NULL) {
*p2 = '\0';
if (strlazymatch(p1, pat)) {
@@ -776,7 +782,10 @@
line++;
p1 = p2 + 1;
}
+out_free_fbuf:
free(fbuf);
+out_close:
+ close(fd);
return nlines;
}
@@ -953,11 +962,15 @@
if (!dbg) {
pr_warning("No dwarf info found in the vmlinux - "
"please rebuild with CONFIG_DEBUG_INFO=y.\n");
+ free(pf.tevs);
+ *tevs = NULL;
return -EBADF;
}
+#if _ELFUTILS_PREREQ(0, 142)
/* Get the call frame information from this dwarf */
pf.cfi = dwarf_getcfi(dbg);
+#endif
off = 0;
line_list__init(&pf.lcache);
diff --git a/tools/perf/util/probe-finder.h b/tools/perf/util/probe-finder.h
index 66f1980..e1f61dc 100644
--- a/tools/perf/util/probe-finder.h
+++ b/tools/perf/util/probe-finder.h
@@ -29,6 +29,7 @@
#include <dwarf.h>
#include <libdw.h>
+#include <version.h>
struct probe_finder {
struct perf_probe_event *pev; /* Target probe event */
@@ -44,7 +45,9 @@
struct list_head lcache; /* Line cache for lazy match */
/* For variable searching */
+#if _ELFUTILS_PREREQ(0, 142)
Dwarf_CFI *cfi; /* Call Frame Information */
+#endif
Dwarf_Op *fb_ops; /* Frame base attribute */
struct perf_probe_arg *pvar; /* Current target variable */
struct kprobe_trace_arg *tvar; /* Current result variable */
diff --git a/tools/perf/util/quote.c b/tools/perf/util/quote.c
index 2726fe4..01f0324 100644
--- a/tools/perf/util/quote.c
+++ b/tools/perf/util/quote.c
@@ -1,8 +1,6 @@
#include "cache.h"
#include "quote.h"
-int quote_path_fully = 1;
-
/* Help to copy the thing properly quoted for the shell safety.
* any single quote is replaced with '\'', any exclamation point
* is replaced with '\!', and the whole thing is enclosed in a
@@ -19,7 +17,7 @@
return (c == '\'' || c == '!');
}
-void sq_quote_buf(struct strbuf *dst, const char *src)
+static void sq_quote_buf(struct strbuf *dst, const char *src)
{
char *to_free = NULL;
@@ -41,23 +39,6 @@
free(to_free);
}
-void sq_quote_print(FILE *stream, const char *src)
-{
- char c;
-
- fputc('\'', stream);
- while ((c = *src++)) {
- if (need_bs_quote(c)) {
- fputs("'\\", stream);
- fputc(c, stream);
- fputc('\'', stream);
- } else {
- fputc(c, stream);
- }
- }
- fputc('\'', stream);
-}
-
void sq_quote_argv(struct strbuf *dst, const char** argv, size_t maxlen)
{
int i;
@@ -71,415 +52,3 @@
die("Too many or long arguments");
}
}
-
-char *sq_dequote_step(char *arg, char **next)
-{
- char *dst = arg;
- char *src = arg;
- char c;
-
- if (*src != '\'')
- return NULL;
- for (;;) {
- c = *++src;
- if (!c)
- return NULL;
- if (c != '\'') {
- *dst++ = c;
- continue;
- }
- /* We stepped out of sq */
- switch (*++src) {
- case '\0':
- *dst = 0;
- if (next)
- *next = NULL;
- return arg;
- case '\\':
- c = *++src;
- if (need_bs_quote(c) && *++src == '\'') {
- *dst++ = c;
- continue;
- }
- /* Fallthrough */
- default:
- if (!next || !isspace(*src))
- return NULL;
- do {
- c = *++src;
- } while (isspace(c));
- *dst = 0;
- *next = src;
- return arg;
- }
- }
-}
-
-char *sq_dequote(char *arg)
-{
- return sq_dequote_step(arg, NULL);
-}
-
-int sq_dequote_to_argv(char *arg, const char ***argv, int *nr, int *alloc)
-{
- char *next = arg;
-
- if (!*arg)
- return 0;
- do {
- char *dequoted = sq_dequote_step(next, &next);
- if (!dequoted)
- return -1;
- ALLOC_GROW(*argv, *nr + 1, *alloc);
- (*argv)[(*nr)++] = dequoted;
- } while (next);
-
- return 0;
-}
-
-/* 1 means: quote as octal
- * 0 means: quote as octal if (quote_path_fully)
- * -1 means: never quote
- * c: quote as "\\c"
- */
-#define X8(x) x, x, x, x, x, x, x, x
-#define X16(x) X8(x), X8(x)
-static signed char const sq_lookup[256] = {
- /* 0 1 2 3 4 5 6 7 */
- /* 0x00 */ 1, 1, 1, 1, 1, 1, 1, 'a',
- /* 0x08 */ 'b', 't', 'n', 'v', 'f', 'r', 1, 1,
- /* 0x10 */ X16(1),
- /* 0x20 */ -1, -1, '"', -1, -1, -1, -1, -1,
- /* 0x28 */ X16(-1), X16(-1), X16(-1),
- /* 0x58 */ -1, -1, -1, -1,'\\', -1, -1, -1,
- /* 0x60 */ X16(-1), X8(-1),
- /* 0x78 */ -1, -1, -1, -1, -1, -1, -1, 1,
- /* 0x80 */ /* set to 0 */
-};
-
-static inline int sq_must_quote(char c)
-{
- return sq_lookup[(unsigned char)c] + quote_path_fully > 0;
-}
-
-/*
- * Returns the longest prefix not needing a quote up to maxlen if
- * positive.
- * This stops at the first \0 because it's marked as a character
- * needing an escape.
- */
-static ssize_t next_quote_pos(const char *s, ssize_t maxlen)
-{
- ssize_t len;
-
- if (maxlen < 0) {
- for (len = 0; !sq_must_quote(s[len]); len++);
- } else {
- for (len = 0; len < maxlen && !sq_must_quote(s[len]); len++);
- }
- return len;
-}
-
-/*
- * C-style name quoting.
- *
- * (1) if sb and fp are both NULL, inspect the input name and counts the
- * number of bytes that are needed to hold c_style quoted version of name,
- * counting the double quotes around it but not terminating NUL, and
- * returns it.
- * However, if name does not need c_style quoting, it returns 0.
- *
- * (2) if sb or fp are not NULL, it emits the c_style quoted version
- * of name, enclosed with double quotes if asked and needed only.
- * Return value is the same as in (1).
- */
-static size_t quote_c_style_counted(const char *name, ssize_t maxlen,
- struct strbuf *sb, FILE *fp, int no_dq)
-{
-#define EMIT(c) \
- do { \
- if (sb) strbuf_addch(sb, (c)); \
- if (fp) fputc((c), fp); \
- count++; \
- } while (0)
-
-#define EMITBUF(s, l) \
- do { \
- int __ret; \
- if (sb) strbuf_add(sb, (s), (l)); \
- if (fp) __ret = fwrite((s), (l), 1, fp); \
- count += (l); \
- } while (0)
-
- ssize_t len, count = 0;
- const char *p = name;
-
- for (;;) {
- int ch;
-
- len = next_quote_pos(p, maxlen);
- if (len == maxlen || !p[len])
- break;
-
- if (!no_dq && p == name)
- EMIT('"');
-
- EMITBUF(p, len);
- EMIT('\\');
- p += len;
- ch = (unsigned char)*p++;
- if (sq_lookup[ch] >= ' ') {
- EMIT(sq_lookup[ch]);
- } else {
- EMIT(((ch >> 6) & 03) + '0');
- EMIT(((ch >> 3) & 07) + '0');
- EMIT(((ch >> 0) & 07) + '0');
- }
- }
-
- EMITBUF(p, len);
- if (p == name) /* no ending quote needed */
- return 0;
-
- if (!no_dq)
- EMIT('"');
- return count;
-}
-
-size_t quote_c_style(const char *name, struct strbuf *sb, FILE *fp, int nodq)
-{
- return quote_c_style_counted(name, -1, sb, fp, nodq);
-}
-
-void quote_two_c_style(struct strbuf *sb, const char *prefix, const char *path, int nodq)
-{
- if (quote_c_style(prefix, NULL, NULL, 0) ||
- quote_c_style(path, NULL, NULL, 0)) {
- if (!nodq)
- strbuf_addch(sb, '"');
- quote_c_style(prefix, sb, NULL, 1);
- quote_c_style(path, sb, NULL, 1);
- if (!nodq)
- strbuf_addch(sb, '"');
- } else {
- strbuf_addstr(sb, prefix);
- strbuf_addstr(sb, path);
- }
-}
-
-void write_name_quoted(const char *name, FILE *fp, int terminator)
-{
- if (terminator) {
- quote_c_style(name, NULL, fp, 0);
- } else {
- fputs(name, fp);
- }
- fputc(terminator, fp);
-}
-
-void write_name_quotedpfx(const char *pfx, ssize_t pfxlen,
- const char *name, FILE *fp, int terminator)
-{
- int needquote = 0;
-
- if (terminator) {
- needquote = next_quote_pos(pfx, pfxlen) < pfxlen
- || name[next_quote_pos(name, -1)];
- }
- if (needquote) {
- fputc('"', fp);
- quote_c_style_counted(pfx, pfxlen, NULL, fp, 1);
- quote_c_style(name, NULL, fp, 1);
- fputc('"', fp);
- } else {
- int ret;
-
- ret = fwrite(pfx, pfxlen, 1, fp);
- fputs(name, fp);
- }
- fputc(terminator, fp);
-}
-
-/* quote path as relative to the given prefix */
-char *quote_path_relative(const char *in, int len,
- struct strbuf *out, const char *prefix)
-{
- int needquote;
-
- if (len < 0)
- len = strlen(in);
-
- /* "../" prefix itself does not need quoting, but "in" might. */
- needquote = (next_quote_pos(in, len) < len);
- strbuf_setlen(out, 0);
- strbuf_grow(out, len);
-
- if (needquote)
- strbuf_addch(out, '"');
- if (prefix) {
- int off = 0;
- while (off < len && prefix[off] && prefix[off] == in[off])
- if (prefix[off] == '/') {
- prefix += off + 1;
- in += off + 1;
- len -= off + 1;
- off = 0;
- } else
- off++;
-
- for (; *prefix; prefix++)
- if (*prefix == '/')
- strbuf_addstr(out, "../");
- }
-
- quote_c_style_counted (in, len, out, NULL, 1);
-
- if (needquote)
- strbuf_addch(out, '"');
- if (!out->len)
- strbuf_addstr(out, "./");
-
- return out->buf;
-}
-
-/*
- * C-style name unquoting.
- *
- * Quoted should point at the opening double quote.
- * + Returns 0 if it was able to unquote the string properly, and appends the
- * result in the strbuf `sb'.
- * + Returns -1 in case of error, and doesn't touch the strbuf. Though note
- * that this function will allocate memory in the strbuf, so calling
- * strbuf_release is mandatory whichever result unquote_c_style returns.
- *
- * Updates endp pointer to point at one past the ending double quote if given.
- */
-int unquote_c_style(struct strbuf *sb, const char *quoted, const char **endp)
-{
- size_t oldlen = sb->len, len;
- int ch, ac;
-
- if (*quoted++ != '"')
- return -1;
-
- for (;;) {
- len = strcspn(quoted, "\"\\");
- strbuf_add(sb, quoted, len);
- quoted += len;
-
- switch (*quoted++) {
- case '"':
- if (endp)
- *endp = quoted;
- return 0;
- case '\\':
- break;
- default:
- goto error;
- }
-
- switch ((ch = *quoted++)) {
- case 'a': ch = '\a'; break;
- case 'b': ch = '\b'; break;
- case 'f': ch = '\f'; break;
- case 'n': ch = '\n'; break;
- case 'r': ch = '\r'; break;
- case 't': ch = '\t'; break;
- case 'v': ch = '\v'; break;
-
- case '\\': case '"':
- break; /* verbatim */
-
- /* octal values with first digit over 4 overflow */
- case '0': case '1': case '2': case '3':
- ac = ((ch - '0') << 6);
- if ((ch = *quoted++) < '0' || '7' < ch)
- goto error;
- ac |= ((ch - '0') << 3);
- if ((ch = *quoted++) < '0' || '7' < ch)
- goto error;
- ac |= (ch - '0');
- ch = ac;
- break;
- default:
- goto error;
- }
- strbuf_addch(sb, ch);
- }
-
- error:
- strbuf_setlen(sb, oldlen);
- return -1;
-}
-
-/* quoting as a string literal for other languages */
-
-void perl_quote_print(FILE *stream, const char *src)
-{
- const char sq = '\'';
- const char bq = '\\';
- char c;
-
- fputc(sq, stream);
- while ((c = *src++)) {
- if (c == sq || c == bq)
- fputc(bq, stream);
- fputc(c, stream);
- }
- fputc(sq, stream);
-}
-
-void python_quote_print(FILE *stream, const char *src)
-{
- const char sq = '\'';
- const char bq = '\\';
- const char nl = '\n';
- char c;
-
- fputc(sq, stream);
- while ((c = *src++)) {
- if (c == nl) {
- fputc(bq, stream);
- fputc('n', stream);
- continue;
- }
- if (c == sq || c == bq)
- fputc(bq, stream);
- fputc(c, stream);
- }
- fputc(sq, stream);
-}
-
-void tcl_quote_print(FILE *stream, const char *src)
-{
- char c;
-
- fputc('"', stream);
- while ((c = *src++)) {
- switch (c) {
- case '[': case ']':
- case '{': case '}':
- case '$': case '\\': case '"':
- fputc('\\', stream);
- default:
- fputc(c, stream);
- break;
- case '\f':
- fputs("\\f", stream);
- break;
- case '\r':
- fputs("\\r", stream);
- break;
- case '\n':
- fputs("\\n", stream);
- break;
- case '\t':
- fputs("\\t", stream);
- break;
- case '\v':
- fputs("\\v", stream);
- break;
- }
- }
- fputc('"', stream);
-}
diff --git a/tools/perf/util/quote.h b/tools/perf/util/quote.h
index b6a0197..172889e 100644
--- a/tools/perf/util/quote.h
+++ b/tools/perf/util/quote.h
@@ -22,47 +22,8 @@
*
* Note that the above examples leak memory! Remember to free result from
* sq_quote() in a real application.
- *
- * sq_quote_buf() writes to an existing buffer of specified size; it
- * will return the number of characters that would have been written
- * excluding the final null regardless of the buffer size.
*/
-extern void sq_quote_print(FILE *stream, const char *src);
-
-extern void sq_quote_buf(struct strbuf *, const char *src);
extern void sq_quote_argv(struct strbuf *, const char **argv, size_t maxlen);
-/* This unwraps what sq_quote() produces in place, but returns
- * NULL if the input does not look like what sq_quote would have
- * produced.
- */
-extern char *sq_dequote(char *);
-
-/*
- * Same as the above, but can be used to unwrap many arguments in the
- * same string separated by space. "next" is changed to point to the
- * next argument that should be passed as first parameter. When there
- * is no more argument to be dequoted, "next" is updated to point to NULL.
- */
-extern char *sq_dequote_step(char *arg, char **next);
-extern int sq_dequote_to_argv(char *arg, const char ***argv, int *nr, int *alloc);
-
-extern int unquote_c_style(struct strbuf *, const char *quoted, const char **endp);
-extern size_t quote_c_style(const char *name, struct strbuf *, FILE *, int no_dq);
-extern void quote_two_c_style(struct strbuf *, const char *, const char *, int);
-
-extern void write_name_quoted(const char *name, FILE *, int terminator);
-extern void write_name_quotedpfx(const char *pfx, ssize_t pfxlen,
- const char *name, FILE *, int terminator);
-
-/* quote path as relative to the given prefix */
-char *quote_path_relative(const char *in, int len,
- struct strbuf *out, const char *prefix);
-
-/* quoting as a string literal for other languages */
-extern void perl_quote_print(FILE *stream, const char *src);
-extern void python_quote_print(FILE *stream, const char *src);
-extern void tcl_quote_print(FILE *stream, const char *src);
-
#endif /* __PERF_QUOTE_H */
diff --git a/tools/perf/util/run-command.c b/tools/perf/util/run-command.c
index 2b615ac..da8e9b2 100644
--- a/tools/perf/util/run-command.c
+++ b/tools/perf/util/run-command.c
@@ -212,93 +212,3 @@
prepare_run_command_v_opt(&cmd, argv, opt);
return run_command(&cmd);
}
-
-int run_command_v_opt_cd_env(const char **argv, int opt, const char *dir, const char *const *env)
-{
- struct child_process cmd;
- prepare_run_command_v_opt(&cmd, argv, opt);
- cmd.dir = dir;
- cmd.env = env;
- return run_command(&cmd);
-}
-
-int start_async(struct async *async)
-{
- int pipe_out[2];
-
- if (pipe(pipe_out) < 0)
- return error("cannot create pipe: %s", strerror(errno));
- async->out = pipe_out[0];
-
- /* Flush stdio before fork() to avoid cloning buffers */
- fflush(NULL);
-
- async->pid = fork();
- if (async->pid < 0) {
- error("fork (async) failed: %s", strerror(errno));
- close_pair(pipe_out);
- return -1;
- }
- if (!async->pid) {
- close(pipe_out[0]);
- exit(!!async->proc(pipe_out[1], async->data));
- }
- close(pipe_out[1]);
-
- return 0;
-}
-
-int finish_async(struct async *async)
-{
- int ret = 0;
-
- if (wait_or_whine(async->pid))
- ret = error("waitpid (async) failed");
-
- return ret;
-}
-
-int run_hook(const char *index_file, const char *name, ...)
-{
- struct child_process hook;
- const char **argv = NULL, *env[2];
- char idx[PATH_MAX];
- va_list args;
- int ret;
- size_t i = 0, alloc = 0;
-
- if (access(perf_path("hooks/%s", name), X_OK) < 0)
- return 0;
-
- va_start(args, name);
- ALLOC_GROW(argv, i + 1, alloc);
- argv[i++] = perf_path("hooks/%s", name);
- while (argv[i-1]) {
- ALLOC_GROW(argv, i + 1, alloc);
- argv[i++] = va_arg(args, const char *);
- }
- va_end(args);
-
- memset(&hook, 0, sizeof(hook));
- hook.argv = argv;
- hook.no_stdin = 1;
- hook.stdout_to_stderr = 1;
- if (index_file) {
- snprintf(idx, sizeof(idx), "PERF_INDEX_FILE=%s", index_file);
- env[0] = idx;
- env[1] = NULL;
- hook.env = env;
- }
-
- ret = start_command(&hook);
- free(argv);
- if (ret) {
- warning("Could not spawn %s", argv[0]);
- return ret;
- }
- ret = finish_command(&hook);
- if (ret == -ERR_RUN_COMMAND_WAITPID_SIGNAL)
- warning("%s exited due to uncaught signal", argv[0]);
-
- return ret;
-}
diff --git a/tools/perf/util/run-command.h b/tools/perf/util/run-command.h
index d790287..1ef264d 100644
--- a/tools/perf/util/run-command.h
+++ b/tools/perf/util/run-command.h
@@ -50,39 +50,9 @@
int finish_command(struct child_process *);
int run_command(struct child_process *);
-extern int run_hook(const char *index_file, const char *name, ...);
-
#define RUN_COMMAND_NO_STDIN 1
#define RUN_PERF_CMD 2 /*If this is to be perf sub-command */
#define RUN_COMMAND_STDOUT_TO_STDERR 4
int run_command_v_opt(const char **argv, int opt);
-/*
- * env (the environment) is to be formatted like environ: "VAR=VALUE".
- * To unset an environment variable use just "VAR".
- */
-int run_command_v_opt_cd_env(const char **argv, int opt, const char *dir, const char *const *env);
-
-/*
- * The purpose of the following functions is to feed a pipe by running
- * a function asynchronously and providing output that the caller reads.
- *
- * It is expected that no synchronization and mutual exclusion between
- * the caller and the feed function is necessary so that the function
- * can run in a thread without interfering with the caller.
- */
-struct async {
- /*
- * proc writes to fd and closes it;
- * returns 0 on success, non-zero on failure
- */
- int (*proc)(int fd, void *data);
- void *data;
- int out; /* caller reads from here and closes it */
- pid_t pid;
-};
-
-int start_async(struct async *async);
-int finish_async(struct async *async);
-
#endif /* __PERF_RUN_COMMAND_H */
diff --git a/tools/perf/util/scripting-engines/trace-event-python.c b/tools/perf/util/scripting-engines/trace-event-python.c
index 81f39ca..33a6325 100644
--- a/tools/perf/util/scripting-engines/trace-event-python.c
+++ b/tools/perf/util/scripting-engines/trace-event-python.c
@@ -208,7 +208,7 @@
int size __unused,
unsigned long long nsecs, char *comm)
{
- PyObject *handler, *retval, *context, *t, *obj;
+ PyObject *handler, *retval, *context, *t, *obj, *dict = NULL;
static char handler_name[256];
struct format_field *field;
unsigned long long val;
@@ -232,6 +232,14 @@
sprintf(handler_name, "%s__%s", event->system, event->name);
+ handler = PyDict_GetItemString(main_dict, handler_name);
+ if (handler && !PyCallable_Check(handler))
+ handler = NULL;
+ if (!handler) {
+ dict = PyDict_New();
+ if (!dict)
+ Py_FatalError("couldn't create Python dict");
+ }
s = nsecs / NSECS_PER_SEC;
ns = nsecs - s * NSECS_PER_SEC;
@@ -242,12 +250,20 @@
PyTuple_SetItem(t, n++, PyString_FromString(handler_name));
PyTuple_SetItem(t, n++,
PyCObject_FromVoidPtr(scripting_context, NULL));
- PyTuple_SetItem(t, n++, PyInt_FromLong(cpu));
- PyTuple_SetItem(t, n++, PyInt_FromLong(s));
- PyTuple_SetItem(t, n++, PyInt_FromLong(ns));
- PyTuple_SetItem(t, n++, PyInt_FromLong(pid));
- PyTuple_SetItem(t, n++, PyString_FromString(comm));
+ if (handler) {
+ PyTuple_SetItem(t, n++, PyInt_FromLong(cpu));
+ PyTuple_SetItem(t, n++, PyInt_FromLong(s));
+ PyTuple_SetItem(t, n++, PyInt_FromLong(ns));
+ PyTuple_SetItem(t, n++, PyInt_FromLong(pid));
+ PyTuple_SetItem(t, n++, PyString_FromString(comm));
+ } else {
+ PyDict_SetItemString(dict, "common_cpu", PyInt_FromLong(cpu));
+ PyDict_SetItemString(dict, "common_s", PyInt_FromLong(s));
+ PyDict_SetItemString(dict, "common_ns", PyInt_FromLong(ns));
+ PyDict_SetItemString(dict, "common_pid", PyInt_FromLong(pid));
+ PyDict_SetItemString(dict, "common_comm", PyString_FromString(comm));
+ }
for (field = event->format.fields; field; field = field->next) {
if (field->flags & FIELD_IS_STRING) {
int offset;
@@ -272,27 +288,31 @@
obj = PyLong_FromUnsignedLongLong(val);
}
}
- PyTuple_SetItem(t, n++, obj);
+ if (handler)
+ PyTuple_SetItem(t, n++, obj);
+ else
+ PyDict_SetItemString(dict, field->name, obj);
+
}
+ if (!handler)
+ PyTuple_SetItem(t, n++, dict);
if (_PyTuple_Resize(&t, n) == -1)
Py_FatalError("error resizing Python tuple");
- handler = PyDict_GetItemString(main_dict, handler_name);
- if (handler && PyCallable_Check(handler)) {
+ if (handler) {
retval = PyObject_CallObject(handler, t);
if (retval == NULL)
handler_call_die(handler_name);
} else {
handler = PyDict_GetItemString(main_dict, "trace_unhandled");
if (handler && PyCallable_Check(handler)) {
- if (_PyTuple_Resize(&t, N_COMMON_FIELDS) == -1)
- Py_FatalError("error resizing Python tuple");
retval = PyObject_CallObject(handler, t);
if (retval == NULL)
handler_call_die("trace_unhandled");
}
+ Py_DECREF(dict);
}
Py_DECREF(t);
@@ -548,12 +568,10 @@
}
fprintf(ofp, "def trace_unhandled(event_name, context, "
- "common_cpu, common_secs, common_nsecs,\n\t\t"
- "common_pid, common_comm):\n");
+ "event_fields_dict):\n");
- fprintf(ofp, "\t\tprint_header(event_name, common_cpu, "
- "common_secs, common_nsecs,\n\t\tcommon_pid, "
- "common_comm)\n\n");
+ fprintf(ofp, "\t\tprint ' '.join(['%%s=%%s'%%(k,str(v))"
+ "for k,v in sorted(event_fields_dict.items())])\n\n");
fprintf(ofp, "def print_header("
"event_name, cpu, secs, nsecs, pid, comm):\n"
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index 25bfca4..c422cd6 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -5,6 +5,7 @@
#include <byteswap.h>
#include <unistd.h>
#include <sys/types.h>
+#include <sys/mman.h>
#include "session.h"
#include "sort.h"
@@ -89,6 +90,7 @@
memcpy(self->filename, filename, len);
self->threads = RB_ROOT;
+ INIT_LIST_HEAD(&self->dead_threads);
self->hists_tree = RB_ROOT;
self->last_match = NULL;
self->mmap_window = 32;
@@ -130,6 +132,16 @@
free(self);
}
+void perf_session__remove_thread(struct perf_session *self, struct thread *th)
+{
+ rb_erase(&th->rb_node, &self->threads);
+ /*
+ * We may have references to this thread, for instance in some hist_entry
+ * instances, so just move them to a separate list.
+ */
+ list_add_tail(&th->node, &self->dead_threads);
+}
+
static bool symbol__match_parent_regex(struct symbol *sym)
{
if (sym->name && !regexec(&parent_regex, sym->name, 0, NULL, 0))
@@ -894,3 +906,10 @@
__dsos__fprintf(&self->host_machine.user_dsos, fp) +
machines__fprintf_dsos(&self->machines, fp);
}
+
+size_t perf_session__fprintf_dsos_buildid(struct perf_session *self, FILE *fp,
+ bool with_hits)
+{
+ size_t ret = machine__fprintf_dsos_buildid(&self->host_machine, fp, with_hits);
+ return ret + machines__fprintf_dsos_buildid(&self->machines, fp, with_hits);
+}
diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h
index e7fce48..9fa0fc2 100644
--- a/tools/perf/util/session.h
+++ b/tools/perf/util/session.h
@@ -26,6 +26,7 @@
unsigned long size;
unsigned long mmap_window;
struct rb_root threads;
+ struct list_head dead_threads;
struct thread *last_match;
struct machine host_machine;
struct rb_root machines;
@@ -99,6 +100,7 @@
int do_read(int fd, void *buf, size_t size);
void perf_session__update_sample_type(struct perf_session *self);
+void perf_session__remove_thread(struct perf_session *self, struct thread *th);
static inline
struct machine *perf_session__find_host_machine(struct perf_session *self)
@@ -132,12 +134,8 @@
size_t perf_session__fprintf_dsos(struct perf_session *self, FILE *fp);
-static inline
-size_t perf_session__fprintf_dsos_buildid(struct perf_session *self, FILE *fp,
- bool with_hits)
-{
- return machines__fprintf_dsos_buildid(&self->machines, fp, with_hits);
-}
+size_t perf_session__fprintf_dsos_buildid(struct perf_session *self,
+ FILE *fp, bool with_hits);
static inline
size_t perf_session__fprintf_nr_events(struct perf_session *self, FILE *fp)
diff --git a/tools/perf/util/sigchain.c b/tools/perf/util/sigchain.c
index 1118b99..ba785e9 100644
--- a/tools/perf/util/sigchain.c
+++ b/tools/perf/util/sigchain.c
@@ -16,7 +16,7 @@
die("BUG: signal out of range: %d", sig);
}
-int sigchain_push(int sig, sigchain_fun f)
+static int sigchain_push(int sig, sigchain_fun f)
{
struct sigchain_signal *s = signals + sig;
check_signum(sig);
diff --git a/tools/perf/util/sigchain.h b/tools/perf/util/sigchain.h
index 1a53c11..959d64e 100644
--- a/tools/perf/util/sigchain.h
+++ b/tools/perf/util/sigchain.h
@@ -3,7 +3,6 @@
typedef void (*sigchain_fun)(int);
-int sigchain_push(int sig, sigchain_fun f);
int sigchain_pop(int sig);
void sigchain_push_common(sigchain_fun f);
diff --git a/tools/perf/util/strbuf.c b/tools/perf/util/strbuf.c
index 5249d5a..92e0685 100644
--- a/tools/perf/util/strbuf.c
+++ b/tools/perf/util/strbuf.c
@@ -41,16 +41,6 @@
return res;
}
-void strbuf_attach(struct strbuf *sb, void *buf, size_t len, size_t alloc)
-{
- strbuf_release(sb);
- sb->buf = buf;
- sb->len = len;
- sb->alloc = alloc;
- strbuf_grow(sb, 0);
- sb->buf[sb->len] = '\0';
-}
-
void strbuf_grow(struct strbuf *sb, size_t extra)
{
if (sb->len + extra + 1 <= sb->len)
@@ -60,94 +50,7 @@
ALLOC_GROW(sb->buf, sb->len + extra + 1, sb->alloc);
}
-void strbuf_trim(struct strbuf *sb)
-{
- char *b = sb->buf;
- while (sb->len > 0 && isspace((unsigned char)sb->buf[sb->len - 1]))
- sb->len--;
- while (sb->len > 0 && isspace(*b)) {
- b++;
- sb->len--;
- }
- memmove(sb->buf, b, sb->len);
- sb->buf[sb->len] = '\0';
-}
-void strbuf_rtrim(struct strbuf *sb)
-{
- while (sb->len > 0 && isspace((unsigned char)sb->buf[sb->len - 1]))
- sb->len--;
- sb->buf[sb->len] = '\0';
-}
-
-void strbuf_ltrim(struct strbuf *sb)
-{
- char *b = sb->buf;
- while (sb->len > 0 && isspace(*b)) {
- b++;
- sb->len--;
- }
- memmove(sb->buf, b, sb->len);
- sb->buf[sb->len] = '\0';
-}
-
-void strbuf_tolower(struct strbuf *sb)
-{
- unsigned int i;
-
- for (i = 0; i < sb->len; i++)
- sb->buf[i] = tolower(sb->buf[i]);
-}
-
-struct strbuf **strbuf_split(const struct strbuf *sb, int delim)
-{
- int alloc = 2, pos = 0;
- char *n, *p;
- struct strbuf **ret;
- struct strbuf *t;
-
- ret = calloc(alloc, sizeof(struct strbuf *));
- p = n = sb->buf;
- while (n < sb->buf + sb->len) {
- int len;
- n = memchr(n, delim, sb->len - (n - sb->buf));
- if (pos + 1 >= alloc) {
- alloc = alloc * 2;
- ret = realloc(ret, sizeof(struct strbuf *) * alloc);
- }
- if (!n)
- n = sb->buf + sb->len - 1;
- len = n - p + 1;
- t = malloc(sizeof(struct strbuf));
- strbuf_init(t, len);
- strbuf_add(t, p, len);
- ret[pos] = t;
- ret[++pos] = NULL;
- p = ++n;
- }
- return ret;
-}
-
-void strbuf_list_free(struct strbuf **sbs)
-{
- struct strbuf **s = sbs;
-
- while (*s) {
- strbuf_release(*s);
- free(*s++);
- }
- free(sbs);
-}
-
-int strbuf_cmp(const struct strbuf *a, const struct strbuf *b)
-{
- int len = a->len < b->len ? a->len: b->len;
- int cmp = memcmp(a->buf, b->buf, len);
- if (cmp)
- return cmp;
- return a->len < b->len ? -1: a->len != b->len;
-}
-
-void strbuf_splice(struct strbuf *sb, size_t pos, size_t len,
+static void strbuf_splice(struct strbuf *sb, size_t pos, size_t len,
const void *data, size_t dlen)
{
if (pos + len < pos)
@@ -166,11 +69,6 @@
strbuf_setlen(sb, sb->len + dlen - len);
}
-void strbuf_insert(struct strbuf *sb, size_t pos, const void *data, size_t len)
-{
- strbuf_splice(sb, pos, 0, data, len);
-}
-
void strbuf_remove(struct strbuf *sb, size_t pos, size_t len)
{
strbuf_splice(sb, pos, len, NULL, 0);
@@ -183,13 +81,6 @@
strbuf_setlen(sb, sb->len + len);
}
-void strbuf_adddup(struct strbuf *sb, size_t pos, size_t len)
-{
- strbuf_grow(sb, len);
- memcpy(sb->buf + sb->len, sb->buf + pos, len);
- strbuf_setlen(sb, sb->len + len);
-}
-
void strbuf_addf(struct strbuf *sb, const char *fmt, ...)
{
int len;
@@ -214,57 +105,6 @@
strbuf_setlen(sb, sb->len + len);
}
-void strbuf_expand(struct strbuf *sb, const char *format, expand_fn_t fn,
- void *context)
-{
- for (;;) {
- const char *percent;
- size_t consumed;
-
- percent = strchrnul(format, '%');
- strbuf_add(sb, format, percent - format);
- if (!*percent)
- break;
- format = percent + 1;
-
- consumed = fn(sb, format, context);
- if (consumed)
- format += consumed;
- else
- strbuf_addch(sb, '%');
- }
-}
-
-size_t strbuf_expand_dict_cb(struct strbuf *sb, const char *placeholder,
- void *context)
-{
- struct strbuf_expand_dict_entry *e = context;
- size_t len;
-
- for (; e->placeholder && (len = strlen(e->placeholder)); e++) {
- if (!strncmp(placeholder, e->placeholder, len)) {
- if (e->value)
- strbuf_addstr(sb, e->value);
- return len;
- }
- }
- return 0;
-}
-
-size_t strbuf_fread(struct strbuf *sb, size_t size, FILE *f)
-{
- size_t res;
- size_t oldalloc = sb->alloc;
-
- strbuf_grow(sb, size);
- res = fread(sb->buf + sb->len, 1, size, f);
- if (res > 0)
- strbuf_setlen(sb, sb->len + res);
- else if (oldalloc == 0)
- strbuf_release(sb);
- return res;
-}
-
ssize_t strbuf_read(struct strbuf *sb, int fd, ssize_t hint)
{
size_t oldlen = sb->len;
@@ -291,70 +131,3 @@
sb->buf[sb->len] = '\0';
return sb->len - oldlen;
}
-
-#define STRBUF_MAXLINK (2*PATH_MAX)
-
-int strbuf_readlink(struct strbuf *sb, const char *path, ssize_t hint)
-{
- size_t oldalloc = sb->alloc;
-
- if (hint < 32)
- hint = 32;
-
- while (hint < STRBUF_MAXLINK) {
- ssize_t len;
-
- strbuf_grow(sb, hint);
- len = readlink(path, sb->buf, hint);
- if (len < 0) {
- if (errno != ERANGE)
- break;
- } else if (len < hint) {
- strbuf_setlen(sb, len);
- return 0;
- }
-
- /* .. the buffer was too small - try again */
- hint *= 2;
- }
- if (oldalloc == 0)
- strbuf_release(sb);
- return -1;
-}
-
-int strbuf_getline(struct strbuf *sb, FILE *fp, int term)
-{
- int ch;
-
- strbuf_grow(sb, 0);
- if (feof(fp))
- return EOF;
-
- strbuf_reset(sb);
- while ((ch = fgetc(fp)) != EOF) {
- if (ch == term)
- break;
- strbuf_grow(sb, 1);
- sb->buf[sb->len++] = ch;
- }
- if (ch == EOF && sb->len == 0)
- return EOF;
-
- sb->buf[sb->len] = '\0';
- return 0;
-}
-
-int strbuf_read_file(struct strbuf *sb, const char *path, ssize_t hint)
-{
- int fd, len;
-
- fd = open(path, O_RDONLY);
- if (fd < 0)
- return -1;
- len = strbuf_read(sb, fd, hint);
- close(fd);
- if (len < 0)
- return -1;
-
- return len;
-}
diff --git a/tools/perf/util/strbuf.h b/tools/perf/util/strbuf.h
index a3d121d..436ac31 100644
--- a/tools/perf/util/strbuf.h
+++ b/tools/perf/util/strbuf.h
@@ -53,12 +53,6 @@
extern void strbuf_init(struct strbuf *buf, ssize_t hint);
extern void strbuf_release(struct strbuf *);
extern char *strbuf_detach(struct strbuf *, size_t *);
-extern void strbuf_attach(struct strbuf *, void *, size_t, size_t);
-static inline void strbuf_swap(struct strbuf *a, struct strbuf *b) {
- struct strbuf tmp = *a;
- *a = *b;
- *b = tmp;
-}
/*----- strbuf size related -----*/
static inline ssize_t strbuf_avail(const struct strbuf *sb) {
@@ -74,17 +68,6 @@
sb->len = len;
sb->buf[len] = '\0';
}
-#define strbuf_reset(sb) strbuf_setlen(sb, 0)
-
-/*----- content related -----*/
-extern void strbuf_trim(struct strbuf *);
-extern void strbuf_rtrim(struct strbuf *);
-extern void strbuf_ltrim(struct strbuf *);
-extern int strbuf_cmp(const struct strbuf *, const struct strbuf *);
-extern void strbuf_tolower(struct strbuf *);
-
-extern struct strbuf **strbuf_split(const struct strbuf *, int delim);
-extern void strbuf_list_free(struct strbuf **);
/*----- add data in your buffer -----*/
static inline void strbuf_addch(struct strbuf *sb, int c) {
@@ -93,45 +76,17 @@
sb->buf[sb->len] = '\0';
}
-extern void strbuf_insert(struct strbuf *, size_t pos, const void *, size_t);
extern void strbuf_remove(struct strbuf *, size_t pos, size_t len);
-/* splice pos..pos+len with given data */
-extern void strbuf_splice(struct strbuf *, size_t pos, size_t len,
- const void *, size_t);
-
extern void strbuf_add(struct strbuf *, const void *, size_t);
static inline void strbuf_addstr(struct strbuf *sb, const char *s) {
strbuf_add(sb, s, strlen(s));
}
-static inline void strbuf_addbuf(struct strbuf *sb, const struct strbuf *sb2) {
- strbuf_add(sb, sb2->buf, sb2->len);
-}
-extern void strbuf_adddup(struct strbuf *sb, size_t pos, size_t len);
-
-typedef size_t (*expand_fn_t) (struct strbuf *sb, const char *placeholder, void *context);
-extern void strbuf_expand(struct strbuf *sb, const char *format, expand_fn_t fn, void *context);
-struct strbuf_expand_dict_entry {
- const char *placeholder;
- const char *value;
-};
-extern size_t strbuf_expand_dict_cb(struct strbuf *sb, const char *placeholder, void *context);
__attribute__((format(printf,2,3)))
extern void strbuf_addf(struct strbuf *sb, const char *fmt, ...);
-extern size_t strbuf_fread(struct strbuf *, size_t, FILE *);
/* XXX: if read fails, any partial read is undone */
extern ssize_t strbuf_read(struct strbuf *, int fd, ssize_t hint);
-extern int strbuf_read_file(struct strbuf *sb, const char *path, ssize_t hint);
-extern int strbuf_readlink(struct strbuf *sb, const char *path, ssize_t hint);
-
-extern int strbuf_getline(struct strbuf *, FILE *, int);
-
-extern void stripspace(struct strbuf *buf, int skip_comments);
-extern int launch_editor(const char *path, struct strbuf *buffer, const char *const *env);
-
-extern int strbuf_branchname(struct strbuf *sb, const char *name);
-extern int strbuf_check_branch_ref(struct strbuf *sb, const char *name);
#endif /* __PERF_STRBUF_H */
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index a06131f..b63e571 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -11,6 +11,7 @@
#include <sys/param.h>
#include <fcntl.h>
#include <unistd.h>
+#include "build-id.h"
#include "symbol.h"
#include "strlist.h"
@@ -1131,6 +1132,10 @@
list_for_each_entry(pos, head, node) {
if (with_hits && !pos->hit)
continue;
+ if (pos->has_build_id) {
+ have_build_id = true;
+ continue;
+ }
if (filename__read_build_id(pos->long_name, pos->build_id,
sizeof(pos->build_id)) > 0) {
have_build_id = true;
@@ -1289,7 +1294,6 @@
int size = PATH_MAX;
char *name;
u8 build_id[BUILD_ID_SIZE];
- char build_id_hex[BUILD_ID_SIZE * 2 + 1];
int ret = -1;
int fd;
struct machine *machine;
@@ -1321,15 +1325,8 @@
}
self->origin = DSO__ORIG_BUILD_ID_CACHE;
-
- if (self->has_build_id) {
- build_id__sprintf(self->build_id, sizeof(self->build_id),
- build_id_hex);
- snprintf(name, size, "%s/%s/.build-id/%.2s/%s",
- getenv("HOME"), DEBUG_CACHE_DIR,
- build_id_hex, build_id_hex + 2);
+ if (dso__build_id_filename(self, name, size) != NULL)
goto open_file;
- }
more:
do {
self->origin++;
@@ -1345,6 +1342,7 @@
case DSO__ORIG_BUILDID:
if (filename__read_build_id(self->long_name, build_id,
sizeof(build_id))) {
+ char build_id_hex[BUILD_ID_SIZE * 2 + 1];
build_id__sprintf(build_id, sizeof(build_id),
build_id_hex);
snprintf(name, size,
@@ -1697,9 +1695,20 @@
symbol_filter_t filter)
{
int i, err = 0;
+ char *filename;
pr_debug("Looking at the vmlinux_path (%d entries long)\n",
- vmlinux_path__nr_entries);
+ vmlinux_path__nr_entries + 1);
+
+ filename = dso__build_id_filename(self, NULL, 0);
+ if (filename != NULL) {
+ err = dso__load_vmlinux(self, map, filename, filter);
+ if (err > 0) {
+ dso__set_long_name(self, filename);
+ goto out;
+ }
+ free(filename);
+ }
for (i = 0; i < vmlinux_path__nr_entries; ++i) {
err = dso__load_vmlinux(self, map, vmlinux_path[i], filter);
@@ -1708,7 +1717,7 @@
break;
}
}
-
+out:
return err;
}
@@ -1736,7 +1745,12 @@
if (symbol_conf.vmlinux_name != NULL) {
err = dso__load_vmlinux(self, map,
symbol_conf.vmlinux_name, filter);
- goto out_try_fixup;
+ if (err > 0) {
+ dso__set_long_name(self,
+ strdup(symbol_conf.vmlinux_name));
+ goto out_fixup;
+ }
+ return err;
}
if (vmlinux_path != NULL) {
@@ -1797,7 +1811,6 @@
pr_debug("Using %s for symbols\n", kallsyms_filename);
free(kallsyms_allocated_filename);
-out_try_fixup:
if (err > 0) {
out_fixup:
if (kallsyms_filename != NULL)
@@ -1933,6 +1946,12 @@
return ret;
}
+size_t machine__fprintf_dsos_buildid(struct machine *self, FILE *fp, bool with_hits)
+{
+ return __dsos__fprintf_buildid(&self->kernel_dsos, fp, with_hits) +
+ __dsos__fprintf_buildid(&self->user_dsos, fp, with_hits);
+}
+
size_t machines__fprintf_dsos_buildid(struct rb_root *self, FILE *fp, bool with_hits)
{
struct rb_node *nd;
@@ -1940,8 +1959,7 @@
for (nd = rb_first(self); nd; nd = rb_next(nd)) {
struct machine *pos = rb_entry(nd, struct machine, rb_node);
- ret += __dsos__fprintf_buildid(&pos->kernel_dsos, fp, with_hits);
- ret += __dsos__fprintf_buildid(&pos->user_dsos, fp, with_hits);
+ ret += machine__fprintf_dsos_buildid(pos, fp, with_hits);
}
return ret;
}
@@ -2099,13 +2117,21 @@
return -1;
}
-size_t vmlinux_path__fprintf(FILE *fp)
+size_t machine__fprintf_vmlinux_path(struct machine *self, FILE *fp)
{
int i;
size_t printed = 0;
+ struct dso *kdso = self->vmlinux_maps[MAP__FUNCTION]->dso;
+
+ if (kdso->has_build_id) {
+ char filename[PATH_MAX];
+ if (dso__build_id_filename(kdso, filename, sizeof(filename)))
+ printed += fprintf(fp, "[0] %s\n", filename);
+ }
for (i = 0; i < vmlinux_path__nr_entries; ++i)
- printed += fprintf(fp, "[%d] %s\n", i, vmlinux_path[i]);
+ printed += fprintf(fp, "[%d] %s\n",
+ i + kdso->has_build_id, vmlinux_path[i]);
return printed;
}
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index 032469e..5e02d2c 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -170,6 +170,7 @@
size_t __dsos__fprintf(struct list_head *head, FILE *fp);
+size_t machine__fprintf_dsos_buildid(struct machine *self, FILE *fp, bool with_hits);
size_t machines__fprintf_dsos(struct rb_root *self, FILE *fp);
size_t machines__fprintf_dsos_buildid(struct rb_root *self, FILE *fp, bool with_hits);
@@ -215,6 +216,6 @@
int symbol__init(void);
bool symbol_type__is_a(char symbol_type, enum map_type map_type);
-size_t vmlinux_path__fprintf(FILE *fp);
+size_t machine__fprintf_vmlinux_path(struct machine *self, FILE *fp);
#endif /* __PERF_SYMBOL */
diff --git a/tools/perf/util/thread.c b/tools/perf/util/thread.c
index 1f7ecd4..9a448b4 100644
--- a/tools/perf/util/thread.c
+++ b/tools/perf/util/thread.c
@@ -7,6 +7,15 @@
#include "util.h"
#include "debug.h"
+/* Skip "." and ".." directories */
+static int filter(const struct dirent *dir)
+{
+ if (dir->d_name[0] == '.')
+ return 0;
+ else
+ return 1;
+}
+
int find_all_tid(int pid, pid_t ** all_tid)
{
char name[256];
@@ -16,7 +25,7 @@
int i;
sprintf(name, "/proc/%d/task", pid);
- items = scandir(name, &namelist, NULL, NULL);
+ items = scandir(name, &namelist, filter, NULL);
if (items <= 0)
return -ENOENT;
*all_tid = malloc(sizeof(pid_t) * items);
diff --git a/tools/perf/util/thread.h b/tools/perf/util/thread.h
index 1dfd9ff..ee6bbcf 100644
--- a/tools/perf/util/thread.h
+++ b/tools/perf/util/thread.h
@@ -6,7 +6,10 @@
#include "symbol.h"
struct thread {
- struct rb_node rb_node;
+ union {
+ struct rb_node rb_node;
+ struct list_head node;
+ };
struct map_groups mg;
pid_t pid;
char shortname[3];
diff --git a/tools/perf/util/trace-event-read.c b/tools/perf/util/trace-event-read.c
index cb54cd0..f55cc3a 100644
--- a/tools/perf/util/trace-event-read.c
+++ b/tools/perf/util/trace-event-read.c
@@ -53,12 +53,6 @@
static ssize_t calc_data_size;
static bool repipe;
-/* If it fails, the next read will report it */
-static void skip(int size)
-{
- lseek(input_fd, size, SEEK_CUR);
-}
-
static int do_read(int fd, void *buf, int size)
{
int rsize = size;
@@ -98,6 +92,19 @@
return r;
}
+/* If it fails, the next read will report it */
+static void skip(int size)
+{
+ char buf[BUFSIZ];
+ int r;
+
+ while (size) {
+ r = size > BUFSIZ ? BUFSIZ : size;
+ read_or_die(buf, r);
+ size -= r;
+ };
+}
+
static unsigned int read4(void)
{
unsigned int data;
diff --git a/tools/perf/util/trace-event.h b/tools/perf/util/trace-event.h
index 406d452..b3e86b1 100644
--- a/tools/perf/util/trace-event.h
+++ b/tools/perf/util/trace-event.h
@@ -233,7 +233,12 @@
#define data2host2(ptr) __data2host2(*(unsigned short *)ptr)
#define data2host4(ptr) __data2host4(*(unsigned int *)ptr)
-#define data2host8(ptr) __data2host8(*(unsigned long long *)ptr)
+#define data2host8(ptr) ({ \
+ unsigned long long __val; \
+ \
+ memcpy(&__val, (ptr), sizeof(unsigned long long)); \
+ __data2host8(__val); \
+})
extern int header_page_ts_offset;
extern int header_page_ts_size;
diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h
index 0795bf30..4e8b6b0 100644
--- a/tools/perf/util/util.h
+++ b/tools/perf/util/util.h
@@ -81,7 +81,7 @@
#include <inttypes.h>
#include "../../../include/linux/magic.h"
#include "types.h"
-
+#include <sys/ttydefaults.h>
#ifndef NO_ICONV
#include <iconv.h>
@@ -152,7 +152,6 @@
extern void set_die_routine(void (*routine)(const char *err, va_list params) NORETURN);
extern int prefixcmp(const char *str, const char *prefix);
-extern time_t tm_to_time_t(const struct tm *tm);
static inline const char *skip_prefix(const char *str, const char *prefix)
{
@@ -160,119 +159,6 @@
return strncmp(str, prefix, len) ? NULL : str + len;
}
-#if defined(NO_MMAP) || defined(USE_WIN32_MMAP)
-
-#ifndef PROT_READ
-#define PROT_READ 1
-#define PROT_WRITE 2
-#define MAP_PRIVATE 1
-#define MAP_FAILED ((void*)-1)
-#endif
-
-#define mmap git_mmap
-#define munmap git_munmap
-extern void *git_mmap(void *start, size_t length, int prot, int flags, int fd, off_t offset);
-extern int git_munmap(void *start, size_t length);
-
-#else /* NO_MMAP || USE_WIN32_MMAP */
-
-#include <sys/mman.h>
-
-#endif /* NO_MMAP || USE_WIN32_MMAP */
-
-#ifdef NO_MMAP
-
-/* This value must be multiple of (pagesize * 2) */
-#define DEFAULT_PACKED_GIT_WINDOW_SIZE (1 * 1024 * 1024)
-
-#else /* NO_MMAP */
-
-/* This value must be multiple of (pagesize * 2) */
-#define DEFAULT_PACKED_GIT_WINDOW_SIZE \
- (sizeof(void*) >= 8 \
- ? 1 * 1024 * 1024 * 1024 \
- : 32 * 1024 * 1024)
-
-#endif /* NO_MMAP */
-
-#ifdef NO_ST_BLOCKS_IN_STRUCT_STAT
-#define on_disk_bytes(st) ((st).st_size)
-#else
-#define on_disk_bytes(st) ((st).st_blocks * 512)
-#endif
-
-#define DEFAULT_PACKED_GIT_LIMIT \
- ((1024L * 1024L) * (sizeof(void*) >= 8 ? 8192 : 256))
-
-#ifdef NO_PREAD
-#define pread git_pread
-extern ssize_t git_pread(int fd, void *buf, size_t count, off_t offset);
-#endif
-/*
- * Forward decl that will remind us if its twin in cache.h changes.
- * This function is used in compat/pread.c. But we can't include
- * cache.h there.
- */
-extern ssize_t read_in_full(int fd, void *buf, size_t count);
-
-#ifdef NO_SETENV
-#define setenv gitsetenv
-extern int gitsetenv(const char *, const char *, int);
-#endif
-
-#ifdef NO_MKDTEMP
-#define mkdtemp gitmkdtemp
-extern char *gitmkdtemp(char *);
-#endif
-
-#ifdef NO_UNSETENV
-#define unsetenv gitunsetenv
-extern void gitunsetenv(const char *);
-#endif
-
-#ifdef NO_STRCASESTR
-#define strcasestr gitstrcasestr
-extern char *gitstrcasestr(const char *haystack, const char *needle);
-#endif
-
-#ifdef NO_STRLCPY
-#define strlcpy gitstrlcpy
-extern size_t gitstrlcpy(char *, const char *, size_t);
-#endif
-
-#ifdef NO_STRTOUMAX
-#define strtoumax gitstrtoumax
-extern uintmax_t gitstrtoumax(const char *, char **, int);
-#endif
-
-#ifdef NO_HSTRERROR
-#define hstrerror githstrerror
-extern const char *githstrerror(int herror);
-#endif
-
-#ifdef NO_MEMMEM
-#define memmem gitmemmem
-void *gitmemmem(const void *haystack, size_t haystacklen,
- const void *needle, size_t needlelen);
-#endif
-
-#ifdef FREAD_READS_DIRECTORIES
-#ifdef fopen
-#undef fopen
-#endif
-#define fopen(a,b) git_fopen(a,b)
-extern FILE *git_fopen(const char*, const char*);
-#endif
-
-#ifdef SNPRINTF_RETURNS_BOGUS
-#define snprintf git_snprintf
-extern int git_snprintf(char *str, size_t maxsize,
- const char *format, ...);
-#define vsnprintf git_vsnprintf
-extern int git_vsnprintf(char *str, size_t maxsize,
- const char *format, va_list ap);
-#endif
-
#ifdef __GLIBC_PREREQ
#if __GLIBC_PREREQ(2, 1)
#define HAVE_STRCHRNUL
@@ -293,28 +179,14 @@
* Wrappers:
*/
extern char *xstrdup(const char *str);
-extern void *xmalloc(size_t size) __attribute__((weak));
-extern void *xmemdupz(const void *data, size_t len);
-extern char *xstrndup(const char *str, size_t len);
extern void *xrealloc(void *ptr, size_t size) __attribute__((weak));
-static inline void *xzalloc(size_t size)
-{
- void *buf = xmalloc(size);
-
- return memset(buf, 0, size);
-}
static inline void *zalloc(size_t size)
{
return calloc(1, size);
}
-static inline size_t xsize_t(off_t len)
-{
- return (size_t)len;
-}
-
static inline int has_extension(const char *filename, const char *ext)
{
size_t len = strlen(filename);
@@ -351,8 +223,6 @@
#define isalpha(x) sane_istest(x,GIT_ALPHA)
#define isalnum(x) sane_istest(x,GIT_ALPHA | GIT_DIGIT)
#define isprint(x) sane_istest(x,GIT_PRINT)
-#define is_glob_special(x) sane_istest(x,GIT_GLOB_SPECIAL)
-#define is_regex_special(x) sane_istest(x,GIT_GLOB_SPECIAL | GIT_REGEX_SPECIAL)
#define tolower(x) sane_case((unsigned char)(x), 0x20)
#define toupper(x) sane_case((unsigned char)(x), 0)
@@ -363,38 +233,6 @@
return x;
}
-static inline int strtoul_ui(char const *s, int base, unsigned int *result)
-{
- unsigned long ul;
- char *p;
-
- errno = 0;
- ul = strtoul(s, &p, base);
- if (errno || *p || p == s || (unsigned int) ul != ul)
- return -1;
- *result = ul;
- return 0;
-}
-
-static inline int strtol_i(char const *s, int base, int *result)
-{
- long ul;
- char *p;
-
- errno = 0;
- ul = strtol(s, &p, base);
- if (errno || *p || p == s || (int) ul != ul)
- return -1;
- *result = ul;
- return 0;
-}
-
-#ifdef INTERNAL_QSORT
-void git_qsort(void *base, size_t nmemb, size_t size,
- int(*compar)(const void *, const void *));
-#define qsort git_qsort
-#endif
-
#ifndef DIR_HAS_BSD_GROUP_SEMANTICS
# define FORCE_DIR_SET_GID S_ISGID
#else
@@ -425,6 +263,19 @@
bool strlazymatch(const char *str, const char *pat);
unsigned long convert_unit(unsigned long value, char *unit);
+#ifndef ESC
+#define ESC 27
+#endif
+
+static inline bool is_exit_key(int key)
+{
+ char up;
+ if (key == CTRL('c') || key == ESC)
+ return true;
+ up = toupper(key);
+ return up == 'Q';
+}
+
#define _STR(x) #x
#define STR(x) _STR(x)
diff --git a/tools/perf/util/wrapper.c b/tools/perf/util/wrapper.c
index bf44ca8..73e900e 100644
--- a/tools/perf/util/wrapper.c
+++ b/tools/perf/util/wrapper.c
@@ -23,46 +23,6 @@
return ret;
}
-void *xmalloc(size_t size)
-{
- void *ret = malloc(size);
- if (!ret && !size)
- ret = malloc(1);
- if (!ret) {
- release_pack_memory(size, -1);
- ret = malloc(size);
- if (!ret && !size)
- ret = malloc(1);
- if (!ret)
- die("Out of memory, malloc failed");
- }
-#ifdef XMALLOC_POISON
- memset(ret, 0xA5, size);
-#endif
- return ret;
-}
-
-/*
- * xmemdupz() allocates (len + 1) bytes of memory, duplicates "len" bytes of
- * "data" to the allocated memory, zero terminates the allocated memory,
- * and returns a pointer to the allocated memory. If the allocation fails,
- * the program dies.
- */
-void *xmemdupz(const void *data, size_t len)
-{
- char *p = xmalloc(len + 1);
- memcpy(p, data, len);
- p[len] = '\0';
- return p;
-}
-
-char *xstrndup(const char *str, size_t len)
-{
- char *p = memchr(str, '\0', len);
-
- return xmemdupz(str, p ? (size_t)(p - str) : len);
-}
-
void *xrealloc(void *ptr, size_t size)
{
void *ret = realloc(ptr, size);
@@ -78,73 +38,3 @@
}
return ret;
}
-
-/*
- * xread() is the same a read(), but it automatically restarts read()
- * operations with a recoverable error (EAGAIN and EINTR). xread()
- * DOES NOT GUARANTEE that "len" bytes is read even if the data is available.
- */
-static ssize_t xread(int fd, void *buf, size_t len)
-{
- ssize_t nr;
- while (1) {
- nr = read(fd, buf, len);
- if ((nr < 0) && (errno == EAGAIN || errno == EINTR))
- continue;
- return nr;
- }
-}
-
-/*
- * xwrite() is the same a write(), but it automatically restarts write()
- * operations with a recoverable error (EAGAIN and EINTR). xwrite() DOES NOT
- * GUARANTEE that "len" bytes is written even if the operation is successful.
- */
-static ssize_t xwrite(int fd, const void *buf, size_t len)
-{
- ssize_t nr;
- while (1) {
- nr = write(fd, buf, len);
- if ((nr < 0) && (errno == EAGAIN || errno == EINTR))
- continue;
- return nr;
- }
-}
-
-ssize_t read_in_full(int fd, void *buf, size_t count)
-{
- char *p = buf;
- ssize_t total = 0;
-
- while (count > 0) {
- ssize_t loaded = xread(fd, p, count);
- if (loaded <= 0)
- return total ? total : loaded;
- count -= loaded;
- p += loaded;
- total += loaded;
- }
-
- return total;
-}
-
-ssize_t write_in_full(int fd, const void *buf, size_t count)
-{
- const char *p = buf;
- ssize_t total = 0;
-
- while (count > 0) {
- ssize_t written = xwrite(fd, p, count);
- if (written < 0)
- return -1;
- if (!written) {
- errno = ENOSPC;
- return -1;
- }
- count -= written;
- p += written;
- total += written;
- }
-
- return total;
-}
diff --git a/usr/Makefile b/usr/Makefile
index 1e6a9e4..6b4b6da 100644
--- a/usr/Makefile
+++ b/usr/Makefile
@@ -15,6 +15,9 @@
# Lzma
suffix_$(CONFIG_INITRAMFS_COMPRESSION_LZMA) = .lzma
+# Lzo
+suffix_$(CONFIG_INITRAMFS_COMPRESSION_LZO) = .lzo
+
# Generate builtin.o based on initramfs_data.o
obj-$(CONFIG_BLK_DEV_INITRD) := initramfs_data$(suffix_y).o
@@ -45,7 +48,7 @@
quiet_cmd_initfs = GEN $@
cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input)
-targets := initramfs_data.cpio.gz initramfs_data.cpio.bz2 initramfs_data.cpio.lzma initramfs_data.cpio
+targets := initramfs_data.cpio.gz initramfs_data.cpio.bz2 initramfs_data.cpio.lzma initramfs_data.cpio.lzo initramfs_data.cpio
# do not try to update files included in initramfs
$(deps_initramfs): ;
diff --git a/usr/initramfs_data.lzo.S b/usr/initramfs_data.lzo.S
new file mode 100644
index 0000000..5921190
--- /dev/null
+++ b/usr/initramfs_data.lzo.S
@@ -0,0 +1,29 @@
+/*
+ initramfs_data includes the compressed binary that is the
+ filesystem used for early user space.
+ Note: Older versions of "as" (prior to binutils 2.11.90.0.23
+ released on 2001-07-14) dit not support .incbin.
+ If you are forced to use older binutils than that then the
+ following trick can be applied to create the resulting binary:
+
+
+ ld -m elf_i386 --format binary --oformat elf32-i386 -r \
+ -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o
+ ld -m elf_i386 -r -o built-in.o initramfs_data.o
+
+ initramfs_data.scr looks like this:
+SECTIONS
+{
+ .init.ramfs : { *(.data) }
+}
+
+ The above example is for i386 - the parameters vary from architectures.
+ Eventually look up LDFLAGS_BLOB in an older version of the
+ arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced.
+
+ Using .incbin has the advantage over ld that the correct flags are set
+ in the ELF header, as required by certain architectures.
+*/
+
+.section .init.ramfs,"a"
+.incbin "usr/initramfs_data.cpio.lzo"
diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c
index 7c79c1d..3500dee 100644
--- a/virt/kvm/ioapic.c
+++ b/virt/kvm/ioapic.c
@@ -192,12 +192,13 @@
int kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level)
{
- u32 old_irr = ioapic->irr;
+ u32 old_irr;
u32 mask = 1 << irq;
union kvm_ioapic_redirect_entry entry;
int ret = 1;
spin_lock(&ioapic->lock);
+ old_irr = ioapic->irr;
if (irq >= 0 && irq < IOAPIC_NUM_PINS) {
entry = ioapic->redirtbl[irq];
level ^= entry.fields.polarity;
diff --git a/virt/kvm/iommu.c b/virt/kvm/iommu.c
index d2f06be..96048ee 100644
--- a/virt/kvm/iommu.c
+++ b/virt/kvm/iommu.c
@@ -271,7 +271,7 @@
pfn = phys >> PAGE_SHIFT;
/* Unmap address from IO address space */
- order = iommu_unmap(domain, gfn_to_gpa(gfn), PAGE_SIZE);
+ order = iommu_unmap(domain, gfn_to_gpa(gfn), 0);
unmap_pages = 1ULL << order;
/* Unpin all pages we just unmapped to not leak any memory */